2018-03-08T07:41:27.743Z,1520494887.743 [Supervisor](DEBUG): Initializing supervisor.
2018-03-08T07:41:27.746Z,1520494887.746 [SyncHandler](DEBUG): Created PCaller Thread at 404514E0
2018-03-08T07:41:27.747Z,1520494887.747 [SyncHandler](INFO): Protected caller Thread ID is 1256
2018-03-08T07:41:27.747Z,1520494887.747 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2018-03-08T07:41:27.748Z,1520494887.748 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 404814E0
2018-03-08T07:41:27.748Z,1520494887.748 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 1257
2018-03-08T07:41:27.751Z,1520494887.751 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2018-03-08T07:41:27.762Z,1520494887.762 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2018-03-08T07:41:27.763Z,1520494887.763 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 404B14E0
2018-03-08T07:41:27.763Z,1520494887.763 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 1258
2018-03-08T07:41:27.764Z,1520494887.764 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2018-03-08T07:41:27.765Z,1520494887.765 [logger ThreadHandler](DEBUG): Created PCaller Thread at 404E14E0
2018-03-08T07:41:27.765Z,1520494887.765 [logger ThreadHandler](INFO): Protected caller Thread ID is 1259
2018-03-08T07:41:27.767Z,1520494887.767 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2018-03-08T07:41:27.767Z,1520494887.767 [Supervisor](INFO): Looking for Config files in directory: Config/
2018-03-08T07:41:27.769Z,1520494887.769 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2018-03-08T07:41:27.949Z,1520494887.949 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2018-03-08T07:41:27.950Z,1520494887.950 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2018-03-08T07:41:28.081Z,1520494888.081 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2018-03-08T07:41:28.081Z,1520494888.081 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2018-03-08T07:41:28.381Z,1520494888.381 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2018-03-08T07:41:28.382Z,1520494888.382 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2018-03-08T07:41:28.509Z,1520494888.509 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2018-03-08T07:41:28.510Z,1520494888.510 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2018-03-08T07:41:28.590Z,1520494888.590 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2018-03-08T07:41:28.774Z,1520494888.774 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2018-03-08T07:41:28.775Z,1520494888.775 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2018-03-08T07:41:28.870Z,1520494888.870 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2018-03-08T07:41:28.870Z,1520494888.870 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2018-03-08T07:41:29.169Z,1520494889.169 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2018-03-08T07:41:29.170Z,1520494889.170 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2018-03-08T07:41:29.497Z,1520494889.497 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2018-03-08T07:41:29.497Z,1520494889.497 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2018-03-08T07:41:29.775Z,1520494889.775 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2018-03-08T07:41:29.776Z,1520494889.776 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2018-03-08T07:41:30.244Z,1520494890.244 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2018-03-08T07:41:30.244Z,1520494890.244 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2018-03-08T07:41:30.440Z,1520494890.440 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2018-03-08T07:41:30.440Z,1520494890.440 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2018-03-08T07:41:30.544Z,1520494890.544 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2018-03-08T07:41:30.544Z,1520494890.544 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2018-03-08T07:41:30.980Z,1520494890.980 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2018-03-08T07:41:30.980Z,1520494890.980 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2018-03-08T07:41:31.092Z,1520494891.092 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2018-03-08T07:41:31.094Z,1520494891.094 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-ahi/
2018-03-08T07:41:31.094Z,1520494891.094 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/Battery.cfg
2018-03-08T07:41:31.316Z,1520494891.316 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2018-03-08T07:41:31.316Z,1520494891.316 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/BIT.cfg
2018-03-08T07:41:31.420Z,1520494891.420 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/Navigation.cfg
2018-03-08T07:41:31.532Z,1520494891.532 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/Control.cfg
2018-03-08T07:41:31.632Z,1520494891.632 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/Simulator.cfg
2018-03-08T07:41:31.720Z,1520494891.720 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/Science.cfg
2018-03-08T07:41:31.872Z,1520494891.872 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/Sensor.cfg
2018-03-08T07:41:32.036Z,1520494892.036 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/Servo.cfg
2018-03-08T07:41:32.148Z,1520494892.148 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/logger.cfg
2018-03-08T07:41:32.256Z,1520494892.256 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/secure.cfg
2018-03-08T07:41:32.344Z,1520494892.344 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/vehicle.cfg
2018-03-08T07:41:32.509Z,1520494892.509 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-ahi/root/
2018-03-08T07:41:32.509Z,1520494892.509 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2018-03-08T07:41:32.513Z,1520494892.513 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2018-03-08T07:41:32.639Z,1520494892.639 [SBIT](DEBUG): Construct Startup Built In Test.
2018-03-08T07:41:32.669Z,1520494892.669 [SBIT] Loaded
2018-03-08T07:41:32.669Z,1520494892.669 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2018-03-08T07:41:32.670Z,1520494892.670 [IBIT](DEBUG): Construct Initiated Built In Test.
2018-03-08T07:41:32.695Z,1520494892.695 [IBIT] Loaded
2018-03-08T07:41:32.696Z,1520494892.696 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2018-03-08T07:41:32.699Z,1520494892.699 [CBIT](DEBUG): Construct Continuous Built In Test.
2018-03-08T07:41:32.847Z,1520494892.847 [CBIT] Loaded
2018-03-08T07:41:32.847Z,1520494892.847 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2018-03-08T07:41:32.848Z,1520494892.848 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2018-03-08T07:41:32.848Z,1520494892.848 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2018-03-08T07:41:32.916Z,1520494892.916 [VerticalControl](DEBUG): Construct VerticalControl.
2018-03-08T07:41:33.011Z,1520494893.011 [VerticalControl] Loaded
2018-03-08T07:41:33.011Z,1520494893.011 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2018-03-08T07:41:33.012Z,1520494893.012 [HorizontalControl](DEBUG): Construct HorizontalControl.
2018-03-08T07:41:33.070Z,1520494893.070 [HorizontalControl] Loaded
2018-03-08T07:41:33.071Z,1520494893.071 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2018-03-08T07:41:33.071Z,1520494893.071 [SpeedControl](DEBUG): Construct SpeedControl.
2018-03-08T07:41:33.081Z,1520494893.081 [SpeedControl] Loaded
2018-03-08T07:41:33.082Z,1520494893.082 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2018-03-08T07:41:33.082Z,1520494893.082 [LoopControl](DEBUG): Construct LoopControl.
2018-03-08T07:41:33.083Z,1520494893.083 [LoopControl] Loaded
2018-03-08T07:41:33.083Z,1520494893.083 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2018-03-08T07:41:33.084Z,1520494893.084 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2018-03-08T07:41:33.084Z,1520494893.084 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2018-03-08T07:41:33.123Z,1520494893.123 [DepthRateCalculator] Loaded
2018-03-08T07:41:33.123Z,1520494893.123 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2018-03-08T07:41:33.128Z,1520494893.128 [PitchRateCalculator] Loaded
2018-03-08T07:41:33.129Z,1520494893.129 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2018-03-08T07:41:33.144Z,1520494893.144 [SpeedCalculator] Loaded
2018-03-08T07:41:33.144Z,1520494893.144 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2018-03-08T07:41:33.165Z,1520494893.165 [TempGradientCalculator] Loaded
2018-03-08T07:41:33.165Z,1520494893.165 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2018-03-08T07:41:33.180Z,1520494893.180 [VerticalTemperatureHomogeneityIndexCalculator] Loaded
2018-03-08T07:41:33.180Z,1520494893.180 [ComponentRegistry](DEBUG): SyncComponent "VerticalTemperatureHomogeneityIndexCalculator" handled in the control thread.
2018-03-08T07:41:33.186Z,1520494893.186 [YawRateCalculator] Loaded
2018-03-08T07:41:33.186Z,1520494893.186 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2018-03-08T07:41:33.187Z,1520494893.187 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2018-03-08T07:41:33.187Z,1520494893.187 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2018-03-08T07:41:33.266Z,1520494893.266 [StratificationFrontDetector](INFO): threshold set to: 0.399988 degC
2018-03-08T07:41:33.266Z,1520494893.266 [StratificationFrontDetector](DEBUG): (re)initializing
2018-03-08T07:41:33.266Z,1520494893.266 [StratificationFrontDetector] Loaded
2018-03-08T07:41:33.267Z,1520494893.267 [ComponentRegistry](DEBUG): SyncComponent "StratificationFrontDetector" handled in the control thread.
2018-03-08T07:41:33.267Z,1520494893.267 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2018-03-08T07:41:33.268Z,1520494893.268 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2018-03-08T07:41:33.501Z,1520494893.501 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2018-03-08T07:41:33.502Z,1520494893.502 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2018-03-08T07:41:33.594Z,1520494893.594 [DeadReckonUsingMultipleVelocitySources] Loaded
2018-03-08T07:41:33.595Z,1520494893.595 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2018-03-08T07:41:33.651Z,1520494893.651 [DeadReckonUsingSpeedCalculator] Loaded
2018-03-08T07:41:33.651Z,1520494893.651 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2018-03-08T07:41:33.703Z,1520494893.703 [DeadReckonWithRespectToSeafloor] Loaded
2018-03-08T07:41:33.704Z,1520494893.704 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToSeafloor" handled in the control thread.
2018-03-08T07:41:33.719Z,1520494893.719 [NavChart] Loaded
2018-03-08T07:41:33.719Z,1520494893.719 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2018-03-08T07:41:33.723Z,1520494893.723 [UniversalFixResidualReporter] Loaded
2018-03-08T07:41:33.724Z,1520494893.724 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2018-03-08T07:41:33.724Z,1520494893.724 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2018-03-08T07:41:33.725Z,1520494893.725 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2018-03-08T07:41:33.737Z,1520494893.737 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2018-03-08T07:41:33.738Z,1520494893.738 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2018-03-08T07:41:33.883Z,1520494893.883 [Aanderaa_O2] Loaded
2018-03-08T07:41:33.883Z,1520494893.883 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread.
2018-03-08T07:41:33.934Z,1520494893.934 [CTD_Seabird] Loaded
2018-03-08T07:41:33.934Z,1520494893.934 [ComponentRegistry](DEBUG): Component "CTD_Seabird" handled in its own thread.
2018-03-08T07:41:33.937Z,1520494893.937 [CTD_Seabird ThreadHandler](DEBUG): Created PCaller Thread at 406D04E0
2018-03-08T07:41:33.937Z,1520494893.937 [CTD_Seabird ThreadHandler](INFO): Protected caller Thread ID is 1340
2018-03-08T07:41:33.953Z,1520494893.953 [ESPComponent] Loaded
2018-03-08T07:41:33.953Z,1520494893.953 [ComponentRegistry](DEBUG): SyncComponent "ESPComponent" handled in the control thread.
2018-03-08T07:41:33.967Z,1520494893.967 [PAR_Licor] Loaded
2018-03-08T07:41:33.967Z,1520494893.967 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2018-03-08T07:41:34.018Z,1520494894.018 [WetLabsBB2FL] Loaded
2018-03-08T07:41:34.018Z,1520494894.018 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2018-03-08T07:41:34.021Z,1520494894.021 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 407004E0
2018-03-08T07:41:34.021Z,1520494894.021 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 1341
2018-03-08T07:41:34.022Z,1520494894.022 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2018-03-08T07:41:34.022Z,1520494894.022 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2018-03-08T07:41:34.282Z,1520494894.282 [DataOverHttps] Loaded
2018-03-08T07:41:34.282Z,1520494894.282 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2018-03-08T07:41:34.295Z,1520494894.295 [Depth_Keller] Loaded
2018-03-08T07:41:34.296Z,1520494894.296 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2018-03-08T07:41:34.300Z,1520494894.300 [DropWeight] Loaded
2018-03-08T07:41:34.301Z,1520494894.301 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2018-03-08T07:41:34.386Z,1520494894.386 [NAL9602] Loaded
2018-03-08T07:41:34.386Z,1520494894.386 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2018-03-08T07:41:34.392Z,1520494894.392 [Onboard] Loaded
2018-03-08T07:41:34.392Z,1520494894.392 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2018-03-08T07:41:34.399Z,1520494894.399 [Radio_Surface] Loaded
2018-03-08T07:41:34.399Z,1520494894.399 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2018-03-08T07:41:34.401Z,1520494894.401 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 409464E0
2018-03-08T07:41:34.401Z,1520494894.401 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 1342
2018-03-08T07:41:34.530Z,1520494894.530 [DAT] Loaded
2018-03-08T07:41:34.530Z,1520494894.530 [ComponentRegistry](DEBUG): SyncComponent "DAT" handled in the control thread.
2018-03-08T07:41:34.575Z,1520494894.575 [PNI_TCM] Loaded
2018-03-08T07:41:34.575Z,1520494894.575 [ComponentRegistry](DEBUG): SyncComponent "PNI_TCM" handled in the control thread.
2018-03-08T07:41:36.340Z,1520494896.340 [BPC1] Loaded
2018-03-08T07:41:36.340Z,1520494896.340 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2018-03-08T07:41:36.341Z,1520494896.341 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2018-03-08T07:41:36.341Z,1520494896.341 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2018-03-08T07:41:36.434Z,1520494896.434 [BuoyancyServo] Loaded
2018-03-08T07:41:36.435Z,1520494896.435 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2018-03-08T07:41:36.446Z,1520494896.446 [ElevatorServo] Loaded
2018-03-08T07:41:36.446Z,1520494896.446 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2018-03-08T07:41:36.457Z,1520494896.457 [MassServo] Loaded
2018-03-08T07:41:36.457Z,1520494896.457 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2018-03-08T07:41:36.468Z,1520494896.468 [RudderServo] Loaded
2018-03-08T07:41:36.469Z,1520494896.469 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2018-03-08T07:41:36.479Z,1520494896.479 [ThrusterServo] Loaded
2018-03-08T07:41:36.480Z,1520494896.480 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2018-03-08T07:41:36.480Z,1520494896.480 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2018-03-08T07:41:36.481Z,1520494896.481 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2018-03-08T07:41:36.578Z,1520494896.578 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2018-03-08T07:41:36.578Z,1520494896.578 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2018-03-08T07:41:36.601Z,1520494896.601 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2018-03-08T07:41:36.605Z,1520494896.605 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2018-03-08T07:41:36.606Z,1520494896.606 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2018-03-08T07:41:36.612Z,1520494896.612 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2018-03-08T07:41:36.613Z,1520494896.613 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 409ED4E0
2018-03-08T07:41:36.614Z,1520494896.614 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 1343
2018-03-08T07:41:36.618Z,1520494896.618 [Supervisor](INFO): Main Thread ID is 796
2018-03-08T07:41:36.618Z,1520494896.618 [Supervisor](DEBUG): Running supervisor.
2018-03-08T07:41:36.619Z,1520494896.619 [CommandLine ThreadHandler](INFO): Handler Thread ID is 1344
2018-03-08T07:41:36.625Z,1520494896.625 [controlThread ThreadHandler](INFO): Handler Thread ID is 1345
2018-03-08T07:41:36.625Z,1520494896.625 [controlThread](DEBUG): Initializing ControlThread
2018-03-08T07:41:36.626Z,1520494896.626 [SBIT](INFO): Initialize SBIT Component.
2018-03-08T07:41:36.626Z,1520494896.626 [SBIT](IMPORTANT): git: 2018-03-07
2018-03-08T07:41:36.627Z,1520494896.627 [SBIT](INFO): git hash: 0556b25932ead1454ecace5636ac3e6af3df01f4
2018-03-08T07:41:36.627Z,1520494896.627 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2018-03-08T07:41:36.628Z,1520494896.628 [SBIT](INFO): Kernel Reporting Different Version From Configuration.
Kernel Expected: #639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
Kernel Reported: #2 PREEMPT Thu Jan 11 20:13:48 PST 2018
2018-03-08T07:41:36.629Z,1520494896.629 [SBIT](INFO): Beginning SBIT in 72.000000 seconds.
2018-03-08T07:41:36.630Z,1520494896.630 [IBIT](INFO): Initialize IBIT Component.
2018-03-08T07:41:36.630Z,1520494896.630 [CBIT](DEBUG): Initialize CBIT Component.
2018-03-08T07:41:36.631Z,1520494896.631 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2018-03-08T07:41:36.633Z,1520494896.633 [logger ThreadHandler](INFO): Handler Thread ID is 1346
2018-03-08T07:41:36.681Z,1520494896.681 [CTD_Seabird ThreadHandler](INFO): Handler Thread ID is 1347
2018-03-08T07:41:36.682Z,1520494896.682 [CTD_Seabird](INFO): Initializing
2018-03-08T07:41:36.682Z,1520494896.682 [CTD_Seabird](INFO): Checking LCM
2018-03-08T07:41:36.691Z,1520494896.691 [CTD_Seabird](INFO): LCM OK
2018-03-08T07:41:36.691Z,1520494896.691 [CTD_Seabird](INFO): Powering up
2018-03-08T07:41:36.701Z,1520494896.701 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 1348
2018-03-08T07:41:36.702Z,1520494896.702 [WetLabsBB2FL](INFO): Powering down
2018-03-08T07:41:36.733Z,1520494896.733 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 1349
2018-03-08T07:41:36.737Z,1520494896.737 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2018-03-08T07:41:36.738Z,1520494896.738 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2018-03-08T07:41:36.739Z,1520494896.739 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2018-03-08T07:41:36.739Z,1520494896.739 [LoopControl](DEBUG): Initialize LoopControlComponent.
2018-03-08T07:41:36.740Z,1520494896.740 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2018-03-08T07:41:36.740Z,1520494896.740 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2018-03-08T07:41:36.740Z,1520494896.740 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2018-03-08T07:41:36.741Z,1520494896.741 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2018-03-08T07:41:36.741Z,1520494896.741 [VerticalTemperatureHomogeneityIndexCalculator](DEBUG): (re)initializing
2018-03-08T07:41:36.742Z,1520494896.742 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2018-03-08T07:41:36.743Z,1520494896.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T07:41:36.743Z,1520494896.743 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T07:41:36.744Z,1520494896.744 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T07:41:36.744Z,1520494896.744 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T07:41:36.745Z,1520494896.745 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T07:41:36.745Z,1520494896.745 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T07:41:36.745Z,1520494896.745 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T07:41:36.746Z,1520494896.746 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T07:41:36.746Z,1520494896.746 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T07:41:36.747Z,1520494896.747 [NavChart](DEBUG): Initialize NavChart Navigation.
2018-03-08T07:41:36.747Z,1520494896.747 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2018-03-08T07:41:36.755Z,1520494896.755 [Radio_Surface](INFO): Powering up
2018-03-08T07:41:36.760Z,1520494896.760 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2018-03-08T07:41:36.777Z,1520494896.777 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 1350
2018-03-08T07:41:36.780Z,1520494896.780 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2HA05M.000
2018-03-08T07:41:36.780Z,1520494896.780 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2HA05M.000
2018-03-08T07:41:36.780Z,1520494896.780 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3HA20M.000
2018-03-08T07:41:36.780Z,1520494896.780 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3HA20M.000
2018-03-08T07:41:36.781Z,1520494896.781 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4HA51M.000
2018-03-08T07:41:36.781Z,1520494896.781 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4HA51M.000
2018-03-08T07:41:36.781Z,1520494896.781 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4HA51M.000
2018-03-08T07:41:36.781Z,1520494896.781 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4HA51M.000
2018-03-08T07:41:36.781Z,1520494896.781 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5HA53M.000
2018-03-08T07:41:36.781Z,1520494896.781 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5HA53M.000
2018-03-08T07:41:36.782Z,1520494896.782 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5HA55M.000
2018-03-08T07:41:36.782Z,1520494896.782 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5HA55M.000
2018-03-08T07:41:36.798Z,1520494896.798 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2018-03-08T07:41:36.837Z,1520494896.837 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2018-03-08T07:41:36.838Z,1520494896.838 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2018-03-08T07:41:36.942Z,1520494896.942 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min
2018-03-08T07:41:36.943Z,1520494896.943 [Default:A.Wait](DEBUG): Construct Wait.
2018-03-08T07:41:36.945Z,1520494896.945 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2018-03-08T07:41:36.964Z,1520494896.964 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2018-03-08T07:41:36.989Z,1520494896.989 [Default:CheckIn:C.Wait](DEBUG): Construct Wait.
2018-03-08T07:41:37.018Z,1520494897.018 [Default:E.Execute](DEBUG): Construct Execute.
2018-03-08T07:41:37.030Z,1520494897.030 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Guidance="Tethys/Guidance"
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="ElapsedSinceDefaultStarted"><Units:minute/><Value>0</Value></DefineArg>

    <Guidance:Wait>
        <Sequence/>
        <Description>
            Wait a moment to see if the scheduler starts a new mission before
            starting to actually run Default.
        </Description>
        <Setting><Guidance:Wait.duration/><Units:second/><Value>13</Value></Setting>
    </Guidance:Wait>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <Sequence Repeat="288"/>

        <ReadDatum Id="Read_GPS">
            <Sequence/>
            <Timeout Duration="P5M"/>
            <Universal:time_fix/>
        </ReadDatum>

        <ReadDatum Id="Read_Iridium">
            <Sequence/>
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped weight due to communications timeout.</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Units:minute/><Value>5</Value></Setting>
        </Guidance:Wait>

        <Assign><Sequence/><Arg Name="ElapsedSinceDefaultStarted"/><Elapsed><Universal:mission_started/></Elapsed></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceDefaultStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Syslog Severity="Important">Restarting logs and Default mission.</Syslog>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>restart logs</String></Setting>
    </Guidance:Execute>

</Mission>


2018-03-08T07:41:37.035Z,1520494897.035 [controlThread](DEBUG): Component order: CycleStarter,Aanderaa_O2,ESPComponent,PAR_Licor,DataOverHttps,Depth_Keller,DropWeight,NAL9602,Onboard,DAT,PNI_TCM,BPC1,PAR_Licor,Depth_Keller,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2018-03-08T07:41:37.107Z,1520494897.107 [ESPComponent](INFO): powering down ESP
2018-03-08T07:41:37.423Z,1520494897.423 [DataOverHttps](DEBUG): dashIP=134.89.2.23 starts with a digit so assuming it is a numeric IP
2018-03-08T07:41:37.448Z,1520494897.448 [Depth_Keller](ERROR): Pressure reading out of range: 1727.332275 decibar
2018-03-08T07:41:37.554Z,1520494897.554 [DAT](INFO): Powering up
2018-03-08T07:41:37.555Z,1520494897.555 [DAT](DEBUG): Initializing DAT.
2018-03-08T07:41:37.721Z,1520494897.721 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-03-08T07:41:37.797Z,1520494897.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-03-08T07:41:37.797Z,1520494897.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-08T07:41:37.803Z,1520494897.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:37.821Z,1520494897.821 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-03-08T07:41:37.843Z,1520494897.843 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-03-08T07:41:37.949Z,1520494897.949 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2018-03-08T07:41:37.957Z,1520494897.957 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2018-03-08T07:41:37.983Z,1520494897.983 [ElevatorServo](DEBUG): Initializing EZServoServo.
2018-03-08T07:41:37.989Z,1520494897.989 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2018-03-08T07:41:37.995Z,1520494897.995 [MassServo](DEBUG): Initializing EZServoServo.
2018-03-08T07:41:38.009Z,1520494898.009 [MassServo](DEBUG): Initializing MassServo.
2018-03-08T07:41:38.022Z,1520494898.022 [RudderServo](DEBUG): Initializing EZServoServo.
2018-03-08T07:41:38.029Z,1520494898.029 [RudderServo](DEBUG): Initializing RudderServo.
2018-03-08T07:41:38.050Z,1520494898.050 [ThrusterServo](DEBUG): Initializing EZServoServo.
2018-03-08T07:41:38.057Z,1520494898.057 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2018-03-08T07:41:38.398Z,1520494898.398 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-03-08T07:41:38.398Z,1520494898.398 [DropWeight] Hardware Fault, FailCount= 1
2018-03-08T07:41:38.399Z,1520494898.399 [DropWeight](ERROR): Hardware Fault
2018-03-08T07:41:38.469Z,1520494898.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-03-08T07:41:38.469Z,1520494898.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-08T07:41:38.470Z,1520494898.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:38.471Z,1520494898.471 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-03-08T07:41:38.471Z,1520494898.471 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-03-08T07:41:38.813Z,1520494898.813 [BuoyancyServo](ERROR): Buoyancy initialization uart error serial timeout
2018-03-08T07:41:38.813Z,1520494898.813 [BuoyancyServo](FAULT): Buoyancy failed to initialize
2018-03-08T07:41:38.813Z,1520494898.813 [BuoyancyServo] Communications Fault, FailCount= 1
2018-03-08T07:41:38.813Z,1520494898.813 [BuoyancyServo](ERROR): Communications Fault
2018-03-08T07:41:39.018Z,1520494899.018 [CommandLine](FAULT): Scheduling is paused
2018-03-08T07:41:39.019Z,1520494899.019 [CBIT](INFO): Critical error at 20180308T074138
2018-03-08T07:41:39.019Z,1520494899.019 [Supervisor](INFO): Stop Mission called by CBIT::checkCriticals
2018-03-08T07:41:39.022Z,1520494899.022 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-03-08T07:41:39.022Z,1520494899.022 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-03-08T07:41:39.022Z,1520494899.022 [CBIT](ERROR): Communications Fault in component: BuoyancyServo
2018-03-08T07:41:39.116Z,1520494899.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-03-08T07:41:39.117Z,1520494899.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-08T07:41:39.118Z,1520494899.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:39.119Z,1520494899.119 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-03-08T07:41:39.119Z,1520494899.119 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-03-08T07:41:39.141Z,1520494899.141 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2018-03-08T07:41:39.142Z,1520494899.142 [BuoyancyServo](INFO): Powering down
2018-03-08T07:41:39.228Z,1520494899.228 [CBIT](INFO): Critical error at 20180308T074139
2018-03-08T07:41:39.472Z,1520494899.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-03-08T07:41:39.472Z,1520494899.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-08T07:41:39.473Z,1520494899.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:39.481Z,1520494899.481 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-03-08T07:41:39.481Z,1520494899.481 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-03-08T07:41:39.900Z,1520494899.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-03-08T07:41:39.900Z,1520494899.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-08T07:41:39.901Z,1520494899.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:39.902Z,1520494899.902 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-03-08T07:41:39.902Z,1520494899.902 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-03-08T07:41:40.353Z,1520494900.353 [Aanderaa_O2](INFO): Powering down
2018-03-08T07:41:40.480Z,1520494900.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-03-08T07:41:40.480Z,1520494900.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-08T07:41:40.481Z,1520494900.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:40.489Z,1520494900.489 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-03-08T07:41:40.489Z,1520494900.489 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-03-08T07:41:40.705Z,1520494900.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-03-08T07:41:40.706Z,1520494900.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-08T07:41:40.708Z,1520494900.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:40.708Z,1520494900.708 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-03-08T07:41:40.725Z,1520494900.725 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-03-08T07:41:41.104Z,1520494901.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-08T07:41:41.117Z,1520494901.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:41.249Z,1520494901.249 [CBIT](INFO): Clearing failed state for component BuoyancyServo
2018-03-08T07:41:41.249Z,1520494901.249 [BuoyancyServo] No Fault, FailCount= 1
2018-03-08T07:41:41.497Z,1520494901.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-08T07:41:41.498Z,1520494901.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:41.538Z,1520494901.538 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2018-03-08T07:41:41.658Z,1520494901.658 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2018-03-08T07:41:41.928Z,1520494901.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-08T07:41:41.929Z,1520494901.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:42.390Z,1520494902.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:42.565Z,1520494902.565 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-03-08T07:41:42.648Z,1520494902.648 [CTD_Seabird](INFO): Started Seabird LCM interface with command:nohup ./lrauv-framework/onboard/bin/gpctd -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyC6 -b 9600 >& /dev/null &
2018-03-08T07:41:42.703Z,1520494902.703 [CTD_Seabird](INFO): LCM subscribed to channel:ctd_t.seabird-gpctd
2018-03-08T07:41:42.857Z,1520494902.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:43.139Z,1520494903.139 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-03-08T07:41:43.140Z,1520494903.140 [CTD_Seabird](INFO): Powering down
2018-03-08T07:41:43.278Z,1520494903.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:43.544Z,1520494903.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:43.955Z,1520494903.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:44.346Z,1520494904.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:44.749Z,1520494904.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:45.202Z,1520494905.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:45.527Z,1520494905.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:45.963Z,1520494905.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:46.354Z,1520494906.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:46.786Z,1520494906.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:47.141Z,1520494907.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:47.599Z,1520494907.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:47.946Z,1520494907.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:48.352Z,1520494908.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:48.784Z,1520494908.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:49.166Z,1520494909.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:49.562Z,1520494909.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:49.942Z,1520494909.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:50.331Z,1520494910.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:50.772Z,1520494910.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:51.135Z,1520494911.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:51.546Z,1520494911.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:51.962Z,1520494911.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:52.351Z,1520494912.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:52.750Z,1520494912.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:53.143Z,1520494913.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:53.572Z,1520494913.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:53.946Z,1520494913.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:54.345Z,1520494914.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:54.749Z,1520494914.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:55.167Z,1520494915.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:55.593Z,1520494915.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:56.013Z,1520494916.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:56.363Z,1520494916.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:56.747Z,1520494916.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:57.157Z,1520494917.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:57.531Z,1520494917.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:57.951Z,1520494917.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:58.350Z,1520494918.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:58.762Z,1520494918.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:59.202Z,1520494919.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:59.539Z,1520494919.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:41:59.970Z,1520494919.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:00.349Z,1520494920.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:00.750Z,1520494920.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:01.174Z,1520494921.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:01.531Z,1520494921.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:01.944Z,1520494921.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:02.346Z,1520494922.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:02.739Z,1520494922.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:03.143Z,1520494923.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:03.544Z,1520494923.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:03.939Z,1520494923.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:04.331Z,1520494924.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:04.690Z,1520494924.690 [NAL9602](INFO): Powering up NAL9602
2018-03-08T07:42:04.751Z,1520494924.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:05.147Z,1520494925.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:05.546Z,1520494925.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:05.971Z,1520494925.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:06.347Z,1520494926.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:06.755Z,1520494926.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:07.182Z,1520494927.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:07.548Z,1520494927.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:07.961Z,1520494927.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:08.370Z,1520494928.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:08.759Z,1520494928.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:09.146Z,1520494929.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:09.566Z,1520494929.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:09.962Z,1520494929.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:10.363Z,1520494930.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:10.762Z,1520494930.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:11.170Z,1520494931.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:11.557Z,1520494931.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:11.932Z,1520494931.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:12.331Z,1520494932.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:12.737Z,1520494932.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:13.144Z,1520494933.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:13.537Z,1520494933.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:13.931Z,1520494933.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:14.338Z,1520494934.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:14.743Z,1520494934.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:15.131Z,1520494935.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:15.543Z,1520494935.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:15.891Z,1520494935.891 [NAL9602](INFO): NAL9602 initialized
2018-03-08T07:42:15.949Z,1520494935.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:16.363Z,1520494936.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:16.741Z,1520494936.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:17.143Z,1520494937.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:17.578Z,1520494937.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:17.961Z,1520494937.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:18.335Z,1520494938.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:18.740Z,1520494938.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:19.143Z,1520494939.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:19.566Z,1520494939.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:19.958Z,1520494939.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:20.334Z,1520494940.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:20.764Z,1520494940.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:21.159Z,1520494941.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:21.582Z,1520494941.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:21.928Z,1520494941.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:22.325Z,1520494942.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:22.741Z,1520494942.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:23.130Z,1520494943.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:23.523Z,1520494943.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:23.943Z,1520494943.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:24.453Z,1520494944.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:24.736Z,1520494944.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:25.146Z,1520494945.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:25.529Z,1520494945.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:25.940Z,1520494945.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:26.330Z,1520494946.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:26.727Z,1520494946.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:27.128Z,1520494947.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:27.545Z,1520494947.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:27.939Z,1520494947.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:28.342Z,1520494948.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:28.739Z,1520494948.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:29.162Z,1520494949.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:29.576Z,1520494949.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:29.949Z,1520494949.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:30.346Z,1520494950.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:30.747Z,1520494950.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:31.138Z,1520494951.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:31.537Z,1520494951.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:31.931Z,1520494951.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:32.354Z,1520494952.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:32.758Z,1520494952.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:33.145Z,1520494953.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:33.555Z,1520494953.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:33.954Z,1520494953.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:34.363Z,1520494954.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:34.743Z,1520494954.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:35.138Z,1520494955.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:35.555Z,1520494955.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:35.958Z,1520494955.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:36.342Z,1520494956.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:36.514Z,1520494956.514 [CommandLine](IMPORTANT): got command failComponent
2018-03-08T07:42:36.514Z,1520494956.514 [CommandLine](IMPORTANT): Failed components:
2018-03-08T07:42:36.515Z,1520494956.515 [CommandLine](IMPORTANT): DropWeight: Hardware Fault
2018-03-08T07:42:36.737Z,1520494956.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:37.143Z,1520494957.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:37.539Z,1520494957.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:37.901Z,1520494957.901 [DAT](FAULT): failed to initialize; deviceResponse_ loaded: 4, Rate 1/2 CC 12.50ms MGP

user:1>, available: 
2018-03-08T07:42:37.901Z,1520494957.901 [DAT] Communications Fault, FailCount= 1
2018-03-08T07:42:37.901Z,1520494957.901 [DAT](ERROR): Communications Fault
2018-03-08T07:42:37.947Z,1520494957.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:37.971Z,1520494957.971 [CBIT](ERROR): Communications Fault in component: DAT
2018-03-08T07:42:38.318Z,1520494958.318 [DAT](INFO): Powering down
2018-03-08T07:42:38.514Z,1520494958.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:38.748Z,1520494958.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:39.153Z,1520494959.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:39.165Z,1520494959.165 [CBIT](INFO): Clearing failed state for component DAT
2018-03-08T07:42:39.165Z,1520494959.165 [DAT] No Fault, FailCount= 1
2018-03-08T07:42:39.554Z,1520494959.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:39.951Z,1520494959.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:40.351Z,1520494960.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:40.751Z,1520494960.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:41.129Z,1520494961.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:41.515Z,1520494961.515 [DAT](INFO): Powering up
2018-03-08T07:42:41.516Z,1520494961.516 [DAT](DEBUG): Initializing DAT.
2018-03-08T07:42:41.560Z,1520494961.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:41.951Z,1520494961.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:42.345Z,1520494962.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:42.731Z,1520494962.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:43.150Z,1520494963.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:43.558Z,1520494963.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:43.933Z,1520494963.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:44.333Z,1520494964.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:44.748Z,1520494964.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:45.162Z,1520494965.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:45.563Z,1520494965.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:45.970Z,1520494965.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:46.355Z,1520494966.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:46.751Z,1520494966.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:47.136Z,1520494967.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:47.534Z,1520494967.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:47.937Z,1520494967.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:48.353Z,1520494968.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:48.735Z,1520494968.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:49.127Z,1520494969.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:49.137Z,1520494969.137 [SBIT](IMPORTANT): Beginning Startup BIT
2018-03-08T07:42:49.157Z,1520494969.157 [CBIT](IMPORTANT): Beginning ground fault scan
2018-03-08T07:42:49.534Z,1520494969.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:49.967Z,1520494969.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:50.366Z,1520494970.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:50.742Z,1520494970.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:51.151Z,1520494971.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:51.685Z,1520494971.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:52.083Z,1520494972.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:52.485Z,1520494972.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:52.892Z,1520494972.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:53.321Z,1520494973.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:53.684Z,1520494973.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:54.091Z,1520494974.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:54.483Z,1520494974.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:54.898Z,1520494974.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:55.276Z,1520494975.276 [DAT](INFO): setting local address to 1
2018-03-08T07:42:55.301Z,1520494975.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:55.680Z,1520494975.680 [DAT](INFO): set local address to 1
2018-03-08T07:42:55.719Z,1520494975.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:56.098Z,1520494976.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:56.485Z,1520494976.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:56.891Z,1520494976.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:57.297Z,1520494977.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:57.687Z,1520494977.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:58.087Z,1520494978.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:58.491Z,1520494978.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:58.927Z,1520494978.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:59.306Z,1520494979.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:42:59.687Z,1520494979.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:00.098Z,1520494980.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:00.229Z,1520494980.229 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): -0.008284
CHAN A1 (24V): -0.011763
CHAN A2 (12V): 0.000327
CHAN A3 (5V): -0.001353
CHAN B0 (3.3V): 0.000316
CHAN B1 (3.15aV): -0.000043
CHAN B2 (3.15bV): -0.000260
CHAN B3 (GND): -0.000023
OPEN: 0.005250
Full Scale Calc: 4.765 mA, -1.589 mA
2018-03-08T07:43:00.508Z,1520494980.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:00.902Z,1520494980.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:01.298Z,1520494981.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:01.690Z,1520494981.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:02.083Z,1520494982.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:02.493Z,1520494982.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:02.886Z,1520494982.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:03.291Z,1520494983.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:03.674Z,1520494983.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:04.079Z,1520494984.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:04.474Z,1520494984.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:05.079Z,1520494985.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:05.464Z,1520494985.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:05.877Z,1520494985.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:06.268Z,1520494986.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:06.656Z,1520494986.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:07.058Z,1520494987.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:07.461Z,1520494987.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:07.857Z,1520494987.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:08.258Z,1520494988.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:08.660Z,1520494988.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:09.067Z,1520494989.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:09.456Z,1520494989.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:09.860Z,1520494989.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:10.269Z,1520494990.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:10.670Z,1520494990.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:11.069Z,1520494991.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:11.482Z,1520494991.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:11.886Z,1520494991.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:12.261Z,1520494992.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:12.656Z,1520494992.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:13.063Z,1520494993.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:13.460Z,1520494993.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:13.860Z,1520494993.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:14.266Z,1520494994.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:14.659Z,1520494994.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:15.065Z,1520494995.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:15.474Z,1520494995.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:15.871Z,1520494995.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:16.275Z,1520494996.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:16.674Z,1520494996.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:17.071Z,1520494997.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:17.471Z,1520494997.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:17.870Z,1520494997.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:18.247Z,1520494998.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:18.647Z,1520494998.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:19.076Z,1520494999.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:19.478Z,1520494999.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:19.873Z,1520494999.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:20.250Z,1520495000.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:20.674Z,1520495000.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:21.072Z,1520495001.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:21.472Z,1520495001.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:21.872Z,1520495001.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:22.251Z,1520495002.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:22.654Z,1520495002.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:23.055Z,1520495003.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:23.453Z,1520495003.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:23.898Z,1520495003.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:24.294Z,1520495004.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:24.684Z,1520495004.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:25.054Z,1520495005.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:25.455Z,1520495005.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:25.856Z,1520495005.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:26.288Z,1520495006.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:26.657Z,1520495006.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:27.067Z,1520495007.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:27.457Z,1520495007.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:27.854Z,1520495007.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:28.257Z,1520495008.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:28.658Z,1520495008.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:29.054Z,1520495009.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:29.449Z,1520495009.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:29.853Z,1520495009.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:30.261Z,1520495010.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:30.657Z,1520495010.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:31.070Z,1520495011.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:31.467Z,1520495011.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:32.006Z,1520495012.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:32.405Z,1520495012.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:32.801Z,1520495012.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:33.201Z,1520495013.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:33.600Z,1520495013.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:34.000Z,1520495014.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:34.402Z,1520495014.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:34.799Z,1520495014.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:35.202Z,1520495015.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:35.607Z,1520495015.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:36.007Z,1520495016.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:36.420Z,1520495016.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:36.834Z,1520495016.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:37.226Z,1520495017.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:37.585Z,1520495017.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:37.979Z,1520495017.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:38.405Z,1520495018.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:38.786Z,1520495018.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:39.206Z,1520495019.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:39.590Z,1520495019.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:39.989Z,1520495019.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:40.390Z,1520495020.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:40.794Z,1520495020.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:41.218Z,1520495021.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:41.612Z,1520495021.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:41.996Z,1520495021.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:42.416Z,1520495022.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:42.787Z,1520495022.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:43.191Z,1520495023.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:43.208Z,1520495023.208 [SBIT](IMPORTANT): SBIT PASSED
2018-03-08T07:43:43.590Z,1520495023.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:43.593Z,1520495023.593 [MissionManager](IMPORTANT): Started mission Startup
2018-03-08T07:43:43.593Z,1520495023.593 [Startup] Running Loop=1
2018-03-08T07:43:43.593Z,1520495023.593 [Startup](DEBUG): Aggregate::initialize Startup
2018-03-08T07:43:43.593Z,1520495023.593 [Startup:A.GoToSurface] Running Loop=1
2018-03-08T07:43:43.593Z,1520495023.593 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-03-08T07:43:43.594Z,1520495023.594 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-03-08T07:43:43.594Z,1520495023.594 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-03-08T07:43:43.595Z,1520495023.595 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-03-08T07:43:43.595Z,1520495023.595 [Startup:A.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 30.000000 seconds.
2018-03-08T07:43:43.596Z,1520495023.596 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-03-08T07:43:43.641Z,1520495023.641 [Startup:StartupSatComms] Running Loop=1
2018-03-08T07:43:43.641Z,1520495023.641 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms
2018-03-08T07:43:43.641Z,1520495023.641 [Startup:StartupSatComms:A] Running Loop=1
2018-03-08T07:43:43.991Z,1520495023.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:43.994Z,1520495023.994 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2018-03-08T07:43:44.395Z,1520495024.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:44.799Z,1520495024.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:45.196Z,1520495025.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:45.595Z,1520495025.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:46.002Z,1520495026.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:46.400Z,1520495026.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:46.798Z,1520495026.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:47.200Z,1520495027.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:47.600Z,1520495027.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:47.991Z,1520495027.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:48.389Z,1520495028.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:48.798Z,1520495028.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:49.197Z,1520495029.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:49.625Z,1520495029.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:50.015Z,1520495030.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:50.398Z,1520495030.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:50.799Z,1520495030.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:51.202Z,1520495031.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:51.604Z,1520495031.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:51.996Z,1520495031.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:52.411Z,1520495032.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:52.804Z,1520495032.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:53.194Z,1520495033.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:53.595Z,1520495033.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:53.992Z,1520495033.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:54.392Z,1520495034.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:54.796Z,1520495034.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:55.197Z,1520495035.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:55.599Z,1520495035.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:56.002Z,1520495036.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:56.399Z,1520495036.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:56.800Z,1520495036.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:57.202Z,1520495037.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:57.601Z,1520495037.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:58.003Z,1520495038.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:58.394Z,1520495038.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:58.799Z,1520495038.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:59.194Z,1520495039.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:43:59.592Z,1520495039.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:00.003Z,1520495040.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:00.393Z,1520495040.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:00.798Z,1520495040.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:01.199Z,1520495041.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:01.607Z,1520495041.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:02.039Z,1520495042.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:02.426Z,1520495042.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:02.810Z,1520495042.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:03.207Z,1520495043.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:03.598Z,1520495043.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:04.003Z,1520495044.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:04.389Z,1520495044.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:04.783Z,1520495044.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:05.187Z,1520495045.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:05.578Z,1520495045.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:05.991Z,1520495045.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:06.387Z,1520495046.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:06.784Z,1520495046.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:07.218Z,1520495047.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:07.623Z,1520495047.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:08.005Z,1520495048.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:08.418Z,1520495048.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:08.790Z,1520495048.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:09.188Z,1520495049.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:09.589Z,1520495049.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:09.991Z,1520495049.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:10.391Z,1520495050.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:10.791Z,1520495050.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:11.222Z,1520495051.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:11.594Z,1520495051.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:11.989Z,1520495051.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:12.421Z,1520495052.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:12.796Z,1520495052.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:13.218Z,1520495053.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:13.595Z,1520495053.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:13.987Z,1520495053.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:14.393Z,1520495054.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:14.827Z,1520495054.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:15.206Z,1520495055.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:15.594Z,1520495055.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:15.993Z,1520495055.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:16.394Z,1520495056.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:16.794Z,1520495056.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:17.208Z,1520495057.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:17.599Z,1520495057.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:17.000Z,1520495058.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:18.398Z,1520495058.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:18.797Z,1520495058.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:19.198Z,1520495059.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:19.598Z,1520495059.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:19.988Z,1520495059.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:20.399Z,1520495060.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:20.789Z,1520495060.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:21.194Z,1520495061.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:21.588Z,1520495061.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:21.995Z,1520495061.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:22.394Z,1520495062.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:22.811Z,1520495062.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:23.210Z,1520495063.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:23.603Z,1520495063.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:24.001Z,1520495064.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:24.402Z,1520495064.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:24.794Z,1520495064.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:25.197Z,1520495065.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:25.598Z,1520495065.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:25.992Z,1520495065.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:26.397Z,1520495066.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:26.806Z,1520495066.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:27.215Z,1520495067.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:27.614Z,1520495067.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:28.004Z,1520495068.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:28.405Z,1520495068.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:28.801Z,1520495068.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:29.215Z,1520495069.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:29.594Z,1520495069.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:29.995Z,1520495069.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:30.392Z,1520495070.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:30.791Z,1520495070.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:31.195Z,1520495071.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:31.603Z,1520495071.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:31.975Z,1520495071.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:32.401Z,1520495072.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:32.803Z,1520495072.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:33.203Z,1520495073.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:33.610Z,1520495073.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:34.014Z,1520495074.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:34.409Z,1520495074.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:34.799Z,1520495074.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:35.179Z,1520495075.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:35.611Z,1520495075.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:35.983Z,1520495075.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:36.387Z,1520495076.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:36.790Z,1520495076.790 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:36.790Z,1520495076.790 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2018-03-08T07:44:36.790Z,1520495076.790 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T07:44:36.791Z,1520495076.791 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:36.792Z,1520495076.792 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-03-08T07:44:36.792Z,1520495076.792 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T07:44:36.794Z,1520495076.794 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:36.794Z,1520495076.794 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-08T07:44:36.794Z,1520495076.794 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T07:44:36.826Z,1520495076.826 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T07:44:36.826Z,1520495076.826 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T07:44:36.826Z,1520495076.826 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T07:44:37.221Z,1520495077.221 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T07:44:37.221Z,1520495077.221 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2018-03-08T07:44:37.221Z,1520495077.221 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T07:44:37.222Z,1520495077.222 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-03-08T07:44:37.222Z,1520495077.222 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T07:44:37.222Z,1520495077.222 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-08T07:44:37.587Z,1520495077.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T07:44:37.588Z,1520495077.588 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T07:44:37.588Z,1520495077.588 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T07:44:37.589Z,1520495077.589 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T07:44:37.589Z,1520495077.589 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T07:44:37.589Z,1520495077.589 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T07:44:37.590Z,1520495077.590 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T07:44:37.590Z,1520495077.590 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T07:44:37.591Z,1520495077.591 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T07:44:37.994Z,1520495077.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T07:44:37.995Z,1520495077.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:38.400Z,1520495078.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T07:44:38.401Z,1520495078.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:38.806Z,1520495078.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T07:44:38.807Z,1520495078.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:39.210Z,1520495079.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T07:44:39.211Z,1520495079.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:39.646Z,1520495079.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-03-08T07:44:39.647Z,1520495079.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:40.006Z,1520495080.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T07:44:40.007Z,1520495080.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:40.396Z,1520495080.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T07:44:40.397Z,1520495080.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:40.798Z,1520495080.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T07:44:40.799Z,1520495080.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:41.199Z,1520495081.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T07:44:41.208Z,1520495081.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:41.602Z,1520495081.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T07:44:41.603Z,1520495081.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:42.001Z,1520495082.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T07:44:42.001Z,1520495082.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:42.402Z,1520495082.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T07:44:42.403Z,1520495082.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:42.802Z,1520495082.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T07:44:42.803Z,1520495082.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:43.198Z,1520495083.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T07:44:43.199Z,1520495083.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:43.614Z,1520495083.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T07:44:43.615Z,1520495083.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:44.004Z,1520495084.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T07:44:44.005Z,1520495084.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:44.009Z,1520495084.009 [Startup:StartupSatComms:A](INFO): Timed out from 2018-03-08T07:43:43.6Z
2018-03-08T07:44:44.009Z,1520495084.009 [Startup:StartupSatComms:A] Stopped
2018-03-08T07:44:44.009Z,1520495084.009 [Startup:StartupSatComms:B] Running Loop=1
2018-03-08T07:44:44.409Z,1520495084.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T07:44:44.410Z,1520495084.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:44.414Z,1520495084.414 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2018-03-08T07:44:44.814Z,1520495084.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T07:44:44.815Z,1520495084.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:45.207Z,1520495085.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T07:44:45.208Z,1520495085.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:45.611Z,1520495085.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T07:44:45.612Z,1520495085.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:46.014Z,1520495086.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T07:44:46.015Z,1520495086.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:46.382Z,1520495086.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T07:44:46.383Z,1520495086.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:46.787Z,1520495086.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T07:44:46.788Z,1520495086.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:47.190Z,1520495087.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T07:44:47.191Z,1520495087.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:47.619Z,1520495087.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T07:44:47.620Z,1520495087.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:47.993Z,1520495087.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T07:44:47.994Z,1520495087.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:48.391Z,1520495088.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T07:44:48.392Z,1520495088.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:48.819Z,1520495088.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T07:44:48.821Z,1520495088.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:49.198Z,1520495089.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T07:44:49.199Z,1520495089.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:49.612Z,1520495089.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T07:44:49.613Z,1520495089.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:50.005Z,1520495090.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T07:44:50.006Z,1520495090.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:50.399Z,1520495090.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T07:44:50.400Z,1520495090.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:50.797Z,1520495090.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T07:44:50.798Z,1520495090.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:51.196Z,1520495091.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T07:44:51.197Z,1520495091.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:51.603Z,1520495091.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T07:44:51.605Z,1520495091.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:52.001Z,1520495092.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T07:44:52.002Z,1520495092.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:52.395Z,1520495092.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T07:44:52.397Z,1520495092.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:52.797Z,1520495092.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T07:44:52.798Z,1520495092.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:53.201Z,1520495093.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T07:44:53.202Z,1520495093.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:53.595Z,1520495093.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T07:44:53.596Z,1520495093.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:54.004Z,1520495094.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T07:44:54.005Z,1520495094.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:54.406Z,1520495094.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T07:44:54.407Z,1520495094.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:54.806Z,1520495094.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T07:44:54.807Z,1520495094.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:55.203Z,1520495095.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T07:44:55.204Z,1520495095.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:55.598Z,1520495095.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T07:44:55.599Z,1520495095.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:55.995Z,1520495095.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T07:44:55.996Z,1520495095.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:56.398Z,1520495096.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T07:44:56.399Z,1520495096.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:56.802Z,1520495096.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:57.189Z,1520495097.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:57.613Z,1520495097.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:58.006Z,1520495098.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:58.401Z,1520495098.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:58.811Z,1520495098.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:59.217Z,1520495099.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:44:59.616Z,1520495099.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:00.015Z,1520495100.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:00.419Z,1520495100.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:00.790Z,1520495100.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:01.215Z,1520495101.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:01.590Z,1520495101.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:01.986Z,1520495101.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:02.392Z,1520495102.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:02.794Z,1520495102.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:03.187Z,1520495103.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:03.589Z,1520495103.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:03.993Z,1520495103.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:04.430Z,1520495104.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:04.797Z,1520495104.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:05.218Z,1520495105.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:05.617Z,1520495105.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:05.990Z,1520495105.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:06.388Z,1520495106.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:06.791Z,1520495106.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:07.209Z,1520495107.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:07.591Z,1520495107.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:07.990Z,1520495107.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:08.395Z,1520495108.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:08.800Z,1520495108.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:09.211Z,1520495109.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:09.599Z,1520495109.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:10.006Z,1520495110.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:10.434Z,1520495110.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:10.807Z,1520495110.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:11.199Z,1520495111.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:11.591Z,1520495111.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:11.992Z,1520495111.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:12.399Z,1520495112.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:12.792Z,1520495112.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:13.206Z,1520495113.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:13.599Z,1520495113.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:13.993Z,1520495113.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:14.391Z,1520495114.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:14.801Z,1520495114.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:15.204Z,1520495115.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:15.610Z,1520495115.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:16.011Z,1520495116.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:16.399Z,1520495116.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:16.799Z,1520495116.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:17.199Z,1520495117.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:17.593Z,1520495117.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:17.993Z,1520495117.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:18.389Z,1520495118.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:18.793Z,1520495118.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:19.201Z,1520495119.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:19.598Z,1520495119.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:20.011Z,1520495120.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:20.437Z,1520495120.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:20.811Z,1520495120.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:21.222Z,1520495121.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:21.598Z,1520495121.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:21.998Z,1520495121.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:22.395Z,1520495122.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:22.802Z,1520495122.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:23.203Z,1520495123.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:23.598Z,1520495123.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:24.007Z,1520495124.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:24.381Z,1520495124.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:24.786Z,1520495124.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:25.222Z,1520495125.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:25.614Z,1520495125.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:26.012Z,1520495126.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:26.424Z,1520495126.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:26.794Z,1520495126.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:27.191Z,1520495127.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:27.587Z,1520495127.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:27.989Z,1520495127.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:28.390Z,1520495128.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:28.791Z,1520495128.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:29.191Z,1520495129.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:29.591Z,1520495129.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:29.989Z,1520495129.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:30.421Z,1520495130.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:30.797Z,1520495130.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:31.231Z,1520495131.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:31.623Z,1520495131.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:31.997Z,1520495131.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:32.403Z,1520495132.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:32.790Z,1520495132.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:33.191Z,1520495133.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:33.595Z,1520495133.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:33.990Z,1520495133.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:34.390Z,1520495134.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:34.790Z,1520495134.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:35.200Z,1520495135.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:35.620Z,1520495135.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:35.997Z,1520495135.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:36.395Z,1520495136.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:36.796Z,1520495136.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:37.190Z,1520495137.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:37.592Z,1520495137.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:37.994Z,1520495137.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:38.395Z,1520495138.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:38.792Z,1520495138.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:39.190Z,1520495139.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:39.594Z,1520495139.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:40.007Z,1520495140.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:40.399Z,1520495140.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:40.810Z,1520495140.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:41.214Z,1520495141.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:41.611Z,1520495141.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:42.011Z,1520495142.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:42.406Z,1520495142.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:42.815Z,1520495142.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:43.193Z,1520495143.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:43.594Z,1520495143.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:44.003Z,1520495144.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:44.393Z,1520495144.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:44.396Z,1520495144.396 [Startup:StartupSatComms:B](INFO): Timed out from 2018-03-08T07:44:44.0Z
2018-03-08T07:45:44.396Z,1520495144.396 [Startup:StartupSatComms:B] Stopped
2018-03-08T07:45:44.397Z,1520495144.397 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2018-03-08T07:45:44.397Z,1520495144.397 [Startup:StartupSatComms] Stopped
2018-03-08T07:45:44.397Z,1520495144.397 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms
2018-03-08T07:45:44.398Z,1520495144.398 [Startup](INFO): Completed Startup
2018-03-08T07:45:44.398Z,1520495144.398 [MissionManager](INFO): Startup is completed.
2018-03-08T07:45:44.398Z,1520495144.398 [MissionManager](INFO): Uninitializing Mission Startup
2018-03-08T07:45:44.398Z,1520495144.398 [Startup] Stopped
2018-03-08T07:45:44.398Z,1520495144.398 [Startup](DEBUG): Aggregate::uninitialize Startup
2018-03-08T07:45:44.398Z,1520495144.398 [Startup:A.GoToSurface] Stopped
2018-03-08T07:45:44.398Z,1520495144.398 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-03-08T07:45:44.802Z,1520495144.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:44.805Z,1520495144.805 [MissionManager](IMPORTANT): Started mission Default
2018-03-08T07:45:44.805Z,1520495144.805 [Default] Running Loop=1
2018-03-08T07:45:44.805Z,1520495144.805 [Default](DEBUG): Aggregate::initialize Default
2018-03-08T07:45:44.805Z,1520495144.805 [Default:B.GoToSurface] Running Loop=1
2018-03-08T07:45:44.805Z,1520495144.805 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-03-08T07:45:44.806Z,1520495144.806 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-03-08T07:45:44.806Z,1520495144.806 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-03-08T07:45:44.806Z,1520495144.806 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-03-08T07:45:44.807Z,1520495144.807 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 30.000000 seconds.
2018-03-08T07:45:44.807Z,1520495144.807 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-03-08T07:45:44.807Z,1520495144.807 [Default:A.Wait] Running Loop=1
2018-03-08T07:45:44.807Z,1520495144.807 [Default:A.Wait](DEBUG): Initialize Wait Component.
2018-03-08T07:45:45.196Z,1520495145.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:45.597Z,1520495145.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:46.001Z,1520495146.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:46.411Z,1520495146.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:46.803Z,1520495146.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:47.201Z,1520495147.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:47.596Z,1520495147.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:47.997Z,1520495147.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:48.398Z,1520495148.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:48.796Z,1520495148.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:49.206Z,1520495149.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:49.602Z,1520495149.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:49.998Z,1520495149.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:50.397Z,1520495150.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:50.801Z,1520495150.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:51.209Z,1520495151.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:51.603Z,1520495151.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:52.010Z,1520495152.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:52.410Z,1520495152.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:52.797Z,1520495152.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:53.214Z,1520495153.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:53.602Z,1520495153.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:54.009Z,1520495154.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:54.406Z,1520495154.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:54.819Z,1520495154.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:55.222Z,1520495155.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:55.589Z,1520495155.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:55.983Z,1520495155.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:56.412Z,1520495156.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:56.814Z,1520495156.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:57.218Z,1520495157.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:57.609Z,1520495157.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:57.989Z,1520495157.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:57.992Z,1520495157.992 [Default:A.Wait](INFO): Done Waiting.
2018-03-08T07:45:58.023Z,1520495158.023 [Default:A.Wait] Stopped
2018-03-08T07:45:58.023Z,1520495158.023 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T07:45:58.383Z,1520495158.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:58.387Z,1520495158.387 [Default:CheckIn] Running Loop=1
2018-03-08T07:45:58.387Z,1520495158.387 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T07:45:58.387Z,1520495158.387 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T07:45:58.789Z,1520495158.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:58.793Z,1520495158.793 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix
2018-03-08T07:45:59.191Z,1520495159.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:59.592Z,1520495159.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:45:59.992Z,1520495159.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:00.391Z,1520495160.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:00.791Z,1520495160.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:01.199Z,1520495161.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:01.625Z,1520495161.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:01.997Z,1520495161.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:02.396Z,1520495162.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:02.799Z,1520495162.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:03.197Z,1520495163.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:03.599Z,1520495163.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:03.998Z,1520495163.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:04.394Z,1520495164.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:04.793Z,1520495164.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:05.200Z,1520495165.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:05.610Z,1520495165.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:05.993Z,1520495165.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:06.395Z,1520495166.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:06.831Z,1520495166.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:07.210Z,1520495167.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:07.606Z,1520495167.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:08.005Z,1520495168.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:08.399Z,1520495168.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:08.790Z,1520495168.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:09.189Z,1520495169.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:09.595Z,1520495169.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:09.998Z,1520495169.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:10.389Z,1520495170.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:10.792Z,1520495170.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:11.188Z,1520495171.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:11.594Z,1520495171.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:12.006Z,1520495172.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:12.410Z,1520495172.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:12.811Z,1520495172.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:13.210Z,1520495173.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:13.599Z,1520495173.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:13.995Z,1520495173.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:14.399Z,1520495174.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:14.799Z,1520495174.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:15.196Z,1520495175.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:15.601Z,1520495175.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:15.992Z,1520495175.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:16.398Z,1520495176.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:16.801Z,1520495176.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:17.234Z,1520495177.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:17.607Z,1520495177.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:18.036Z,1520495178.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:18.400Z,1520495178.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:18.794Z,1520495178.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:19.199Z,1520495179.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:19.599Z,1520495179.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:19.995Z,1520495179.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:20.396Z,1520495180.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:20.791Z,1520495180.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:21.191Z,1520495181.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:21.599Z,1520495181.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:21.998Z,1520495181.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:22.404Z,1520495182.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:22.808Z,1520495182.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:23.204Z,1520495183.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:23.605Z,1520495183.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:23.997Z,1520495183.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:24.401Z,1520495184.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:24.796Z,1520495184.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:25.205Z,1520495185.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:25.602Z,1520495185.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:26.001Z,1520495186.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:26.401Z,1520495186.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:26.803Z,1520495186.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:27.202Z,1520495187.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:27.608Z,1520495187.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:28.003Z,1520495188.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:28.412Z,1520495188.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:28.823Z,1520495188.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:29.207Z,1520495189.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:29.602Z,1520495189.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:30.001Z,1520495190.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:30.404Z,1520495190.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:30.802Z,1520495190.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:31.201Z,1520495191.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:31.602Z,1520495191.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:31.975Z,1520495191.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:32.404Z,1520495192.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:32.807Z,1520495192.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:33.205Z,1520495193.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:33.608Z,1520495193.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:34.011Z,1520495194.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:34.377Z,1520495194.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:34.806Z,1520495194.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:35.189Z,1520495195.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:35.590Z,1520495195.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:35.995Z,1520495195.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:36.387Z,1520495196.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:36.790Z,1520495196.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:37.189Z,1520495197.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:37.589Z,1520495197.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:38.012Z,1520495198.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:38.405Z,1520495198.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:38.822Z,1520495198.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:39.219Z,1520495199.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:39.598Z,1520495199.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:40.021Z,1520495200.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:40.430Z,1520495200.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:40.794Z,1520495200.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:41.191Z,1520495201.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:41.596Z,1520495201.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:42.003Z,1520495202.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:42.394Z,1520495202.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:42.787Z,1520495202.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:43.198Z,1520495203.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:43.596Z,1520495203.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:43.995Z,1520495203.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:44.397Z,1520495204.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:44.792Z,1520495204.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:45.196Z,1520495205.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:45.589Z,1520495205.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:45.992Z,1520495205.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:46.394Z,1520495206.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:46.799Z,1520495206.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:47.233Z,1520495207.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:47.594Z,1520495207.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:47.989Z,1520495207.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:48.403Z,1520495208.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:48.796Z,1520495208.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:49.196Z,1520495209.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:49.595Z,1520495209.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:49.994Z,1520495209.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:50.389Z,1520495210.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:50.794Z,1520495210.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:51.219Z,1520495211.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:51.607Z,1520495211.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:51.993Z,1520495211.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:52.399Z,1520495212.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:52.799Z,1520495212.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:53.198Z,1520495213.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:53.600Z,1520495213.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:53.999Z,1520495213.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:54.399Z,1520495214.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:54.799Z,1520495214.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:55.189Z,1520495215.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:55.592Z,1520495215.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:55.989Z,1520495215.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:56.393Z,1520495216.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:56.793Z,1520495216.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:57.195Z,1520495217.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:57.595Z,1520495217.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:58.002Z,1520495218.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:58.395Z,1520495218.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:58.805Z,1520495218.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:59.200Z,1520495219.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:46:59.611Z,1520495219.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:00.011Z,1520495220.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:00.406Z,1520495220.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:00.795Z,1520495220.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:01.203Z,1520495221.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:01.591Z,1520495221.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:01.998Z,1520495221.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:02.400Z,1520495222.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:02.822Z,1520495222.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:03.202Z,1520495223.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:03.601Z,1520495223.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:04.011Z,1520495224.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:04.405Z,1520495224.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:04.808Z,1520495224.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:05.204Z,1520495225.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:05.602Z,1520495225.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:05.999Z,1520495225.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:06.401Z,1520495226.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:06.779Z,1520495226.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:07.204Z,1520495227.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:07.603Z,1520495227.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:07.979Z,1520495227.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:08.407Z,1520495228.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:08.814Z,1520495228.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:09.208Z,1520495229.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:09.610Z,1520495229.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:10.010Z,1520495230.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:10.409Z,1520495230.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:10.810Z,1520495230.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:11.212Z,1520495231.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:11.587Z,1520495231.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:11.986Z,1520495231.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:12.414Z,1520495232.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:12.811Z,1520495232.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:13.206Z,1520495233.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:13.595Z,1520495233.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:13.987Z,1520495233.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:14.438Z,1520495234.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:14.846Z,1520495234.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:15.226Z,1520495235.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:15.617Z,1520495235.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:15.993Z,1520495235.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:16.450Z,1520495236.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:16.791Z,1520495236.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:17.199Z,1520495237.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:17.590Z,1520495237.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:17.992Z,1520495237.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:18.491Z,1520495238.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:18.783Z,1520495238.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:19.151Z,1520495239.151 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-08T07:47:19.184Z,1520495239.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:19.582Z,1520495239.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:19.997Z,1520495239.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:20.415Z,1520495240.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:20.795Z,1520495240.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:21.191Z,1520495241.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:21.595Z,1520495241.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:22.002Z,1520495242.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:22.401Z,1520495242.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:22.805Z,1520495242.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:23.217Z,1520495243.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:23.605Z,1520495243.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:24.006Z,1520495244.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:24.402Z,1520495244.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:24.798Z,1520495244.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:25.203Z,1520495245.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:25.615Z,1520495245.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:26.018Z,1520495246.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:26.431Z,1520495246.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:26.786Z,1520495246.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:27.207Z,1520495247.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:27.612Z,1520495247.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:28.017Z,1520495248.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:28.389Z,1520495248.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:28.815Z,1520495248.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:29.215Z,1520495249.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:29.618Z,1520495249.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:30.017Z,1520495250.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:30.385Z,1520495250.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:30.791Z,1520495250.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:31.187Z,1520495251.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:31.615Z,1520495251.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:32.015Z,1520495252.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:32.396Z,1520495252.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:32.790Z,1520495252.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:33.187Z,1520495253.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:33.595Z,1520495253.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:33.991Z,1520495253.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:34.387Z,1520495254.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:34.793Z,1520495254.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:35.196Z,1520495255.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:35.594Z,1520495255.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:35.994Z,1520495255.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:36.418Z,1520495256.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:36.791Z,1520495256.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:37.190Z,1520495257.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:37.618Z,1520495257.618 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:37.619Z,1520495257.619 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2018-03-08T07:47:37.619Z,1520495257.619 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T07:47:37.621Z,1520495257.621 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:37.621Z,1520495257.621 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-03-08T07:47:37.621Z,1520495257.621 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T07:47:37.622Z,1520495257.622 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:37.623Z,1520495257.623 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-08T07:47:37.623Z,1520495257.623 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T07:47:37.634Z,1520495257.634 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T07:47:37.634Z,1520495257.634 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T07:47:37.634Z,1520495257.634 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T07:47:38.071Z,1520495258.071 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T07:47:38.071Z,1520495258.071 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2018-03-08T07:47:38.071Z,1520495258.071 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T07:47:38.071Z,1520495258.071 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-03-08T07:47:38.072Z,1520495258.072 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T07:47:38.072Z,1520495258.072 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-08T07:47:38.399Z,1520495258.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T07:47:38.400Z,1520495258.400 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T07:47:38.400Z,1520495258.400 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T07:47:38.400Z,1520495258.400 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T07:47:38.401Z,1520495258.401 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T07:47:38.401Z,1520495258.401 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T07:47:38.402Z,1520495258.402 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T07:47:38.402Z,1520495258.402 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T07:47:38.402Z,1520495258.402 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T07:47:38.788Z,1520495258.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T07:47:38.789Z,1520495258.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:39.194Z,1520495259.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T07:47:39.195Z,1520495259.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:39.594Z,1520495259.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T07:47:39.595Z,1520495259.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:39.988Z,1520495259.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T07:47:39.989Z,1520495259.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:40.400Z,1520495260.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T07:47:40.401Z,1520495260.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:40.800Z,1520495260.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T07:47:40.801Z,1520495260.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:41.198Z,1520495261.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T07:47:41.199Z,1520495261.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:41.603Z,1520495261.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T07:47:41.604Z,1520495261.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:42.033Z,1520495262.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T07:47:42.034Z,1520495262.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:42.394Z,1520495262.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T07:47:42.395Z,1520495262.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:42.799Z,1520495262.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T07:47:42.801Z,1520495262.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:43.192Z,1520495263.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T07:47:43.193Z,1520495263.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:43.600Z,1520495263.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T07:47:43.601Z,1520495263.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:44.003Z,1520495264.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T07:47:44.004Z,1520495264.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:44.410Z,1520495264.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T07:47:44.411Z,1520495264.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:44.793Z,1520495264.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T07:47:44.794Z,1520495264.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:45.191Z,1520495265.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T07:47:45.192Z,1520495265.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:45.605Z,1520495265.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T07:47:45.606Z,1520495265.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:45.995Z,1520495265.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T07:47:45.996Z,1520495265.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:46.395Z,1520495266.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T07:47:46.396Z,1520495266.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:46.800Z,1520495266.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T07:47:46.801Z,1520495266.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:47.204Z,1520495267.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T07:47:47.205Z,1520495267.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:47.609Z,1520495267.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T07:47:47.610Z,1520495267.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:47.998Z,1520495267.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T07:47:47.999Z,1520495267.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:48.401Z,1520495268.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T07:47:48.402Z,1520495268.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:48.801Z,1520495268.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T07:47:48.802Z,1520495268.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:49.200Z,1520495269.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T07:47:49.201Z,1520495269.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:49.606Z,1520495269.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T07:47:49.607Z,1520495269.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:50.009Z,1520495270.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T07:47:50.010Z,1520495270.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:50.406Z,1520495270.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T07:47:50.407Z,1520495270.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:50.780Z,1520495270.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T07:47:50.805Z,1520495270.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:51.213Z,1520495271.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T07:47:51.214Z,1520495271.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:51.610Z,1520495271.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T07:47:51.611Z,1520495271.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:51.988Z,1520495271.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T07:47:51.989Z,1520495271.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:52.389Z,1520495272.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T07:47:52.390Z,1520495272.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:52.813Z,1520495272.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T07:47:52.814Z,1520495272.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:53.211Z,1520495273.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T07:47:53.212Z,1520495273.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:53.614Z,1520495273.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T07:47:53.615Z,1520495273.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:54.018Z,1520495274.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T07:47:54.019Z,1520495274.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:54.387Z,1520495274.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T07:47:54.387Z,1520495274.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:54.802Z,1520495274.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T07:47:54.803Z,1520495274.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:55.191Z,1520495275.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T07:47:55.193Z,1520495275.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:55.620Z,1520495275.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T07:47:55.621Z,1520495275.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:56.018Z,1520495276.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T07:47:56.019Z,1520495276.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:56.393Z,1520495276.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T07:47:56.394Z,1520495276.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:56.790Z,1520495276.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T07:47:56.791Z,1520495276.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:57.217Z,1520495277.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T07:47:57.218Z,1520495277.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:57.592Z,1520495277.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T07:47:57.593Z,1520495277.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:57.994Z,1520495277.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:58.390Z,1520495278.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:58.821Z,1520495278.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:59.229Z,1520495279.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:59.597Z,1520495279.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:47:59.995Z,1520495279.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:00.394Z,1520495280.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:00.791Z,1520495280.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:01.189Z,1520495281.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:01.596Z,1520495281.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:01.000Z,1520495282.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:02.401Z,1520495282.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:02.793Z,1520495282.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:03.188Z,1520495283.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:03.599Z,1520495283.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:03.992Z,1520495283.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:04.415Z,1520495284.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:04.807Z,1520495284.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:05.202Z,1520495285.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:05.642Z,1520495285.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:05.999Z,1520495285.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:06.393Z,1520495286.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:06.795Z,1520495286.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:07.199Z,1520495287.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:07.636Z,1520495287.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:08.003Z,1520495288.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:08.411Z,1520495288.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:08.792Z,1520495288.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:09.191Z,1520495289.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:09.591Z,1520495289.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:09.997Z,1520495289.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:10.395Z,1520495290.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:10.810Z,1520495290.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:11.206Z,1520495291.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:11.604Z,1520495291.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:11.994Z,1520495291.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:12.397Z,1520495292.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:12.794Z,1520495292.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:13.197Z,1520495293.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:13.603Z,1520495293.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:14.005Z,1520495294.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:14.400Z,1520495294.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:14.798Z,1520495294.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:15.194Z,1520495295.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:15.594Z,1520495295.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:15.992Z,1520495295.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:16.391Z,1520495296.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:16.800Z,1520495296.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:17.199Z,1520495297.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:17.601Z,1520495297.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:17.998Z,1520495297.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:18.398Z,1520495298.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:18.798Z,1520495298.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:19.194Z,1520495299.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:19.607Z,1520495299.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:20.000Z,1520495300.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:20.404Z,1520495300.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:20.791Z,1520495300.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:21.196Z,1520495301.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:21.599Z,1520495301.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:21.998Z,1520495301.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:22.395Z,1520495302.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:22.811Z,1520495302.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:23.204Z,1520495303.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:23.606Z,1520495303.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:23.999Z,1520495303.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:24.402Z,1520495304.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:24.798Z,1520495304.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:25.194Z,1520495305.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:25.600Z,1520495305.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:25.000Z,1520495306.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:26.405Z,1520495306.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:26.799Z,1520495306.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:27.183Z,1520495307.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:27.598Z,1520495307.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:27.996Z,1520495307.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:28.387Z,1520495308.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:28.804Z,1520495308.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:29.214Z,1520495309.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:29.605Z,1520495309.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:29.997Z,1520495309.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:30.408Z,1520495310.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:30.780Z,1520495310.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:31.211Z,1520495311.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:31.609Z,1520495311.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:31.987Z,1520495311.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:32.412Z,1520495312.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:32.782Z,1520495312.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:33.182Z,1520495313.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:33.611Z,1520495313.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:33.991Z,1520495313.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:34.384Z,1520495314.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:34.815Z,1520495314.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:35.216Z,1520495315.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:35.617Z,1520495315.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:35.987Z,1520495315.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:36.386Z,1520495316.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:36.790Z,1520495316.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:37.221Z,1520495317.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:37.600Z,1520495317.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:37.992Z,1520495317.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:38.396Z,1520495318.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:38.787Z,1520495318.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:39.186Z,1520495319.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:39.589Z,1520495319.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:39.989Z,1520495319.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:40.386Z,1520495320.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:40.796Z,1520495320.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:41.218Z,1520495321.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:41.592Z,1520495321.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:41.991Z,1520495321.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:42.390Z,1520495322.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:42.788Z,1520495322.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:43.191Z,1520495323.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:43.617Z,1520495323.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:43.000Z,1520495324.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:44.392Z,1520495324.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:44.789Z,1520495324.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:45.188Z,1520495325.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:45.591Z,1520495325.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:45.992Z,1520495325.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:46.387Z,1520495326.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:46.825Z,1520495326.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:47.206Z,1520495327.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:47.596Z,1520495327.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:47.995Z,1520495327.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:48.393Z,1520495328.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:48.791Z,1520495328.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:49.189Z,1520495329.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:49.598Z,1520495329.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:49.995Z,1520495329.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:50.396Z,1520495330.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:50.792Z,1520495330.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:51.198Z,1520495331.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:51.590Z,1520495331.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:51.990Z,1520495331.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:52.384Z,1520495332.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:52.798Z,1520495332.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:53.206Z,1520495333.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:53.602Z,1520495333.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:53.993Z,1520495333.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:54.389Z,1520495334.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:54.793Z,1520495334.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:55.189Z,1520495335.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:55.598Z,1520495335.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:55.995Z,1520495335.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:56.397Z,1520495336.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:56.793Z,1520495336.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:57.188Z,1520495337.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:57.588Z,1520495337.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:58.002Z,1520495338.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:58.383Z,1520495338.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:58.794Z,1520495338.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:59.196Z,1520495339.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:59.596Z,1520495339.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:48:59.993Z,1520495339.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:00.389Z,1520495340.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:00.790Z,1520495340.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:01.195Z,1520495341.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:01.597Z,1520495341.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:01.995Z,1520495341.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:02.396Z,1520495342.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:02.795Z,1520495342.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:03.191Z,1520495343.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:03.593Z,1520495343.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:03.999Z,1520495343.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:04.393Z,1520495344.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:04.799Z,1520495344.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:05.197Z,1520495345.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:05.597Z,1520495345.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:05.994Z,1520495345.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:06.398Z,1520495346.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:06.795Z,1520495346.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:07.194Z,1520495347.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:07.599Z,1520495347.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:07.000Z,1520495348.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:08.399Z,1520495348.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:08.798Z,1520495348.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:09.195Z,1520495349.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:09.592Z,1520495349.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:10.002Z,1520495350.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:10.391Z,1520495350.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:10.800Z,1520495350.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:11.203Z,1520495351.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:11.600Z,1520495351.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:11.998Z,1520495351.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:12.391Z,1520495352.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:12.793Z,1520495352.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:13.194Z,1520495353.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:13.601Z,1520495353.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:14.001Z,1520495354.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:14.403Z,1520495354.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:14.790Z,1520495354.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:15.195Z,1520495355.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:15.602Z,1520495355.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:15.994Z,1520495355.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:16.395Z,1520495356.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:16.800Z,1520495356.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:17.226Z,1520495357.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:17.600Z,1520495357.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:17.989Z,1520495357.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:18.389Z,1520495358.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:18.795Z,1520495358.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:19.189Z,1520495359.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:19.602Z,1520495359.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:19.000Z,1520495360.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:20.406Z,1520495360.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:20.792Z,1520495360.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:21.195Z,1520495361.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:21.599Z,1520495361.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:21.993Z,1520495361.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:22.395Z,1520495362.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:22.803Z,1520495362.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:23.199Z,1520495363.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:23.599Z,1520495363.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:23.999Z,1520495363.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:24.392Z,1520495364.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:24.795Z,1520495364.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:25.198Z,1520495365.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:25.598Z,1520495365.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:26.000Z,1520495366.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:26.399Z,1520495366.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:26.792Z,1520495366.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:27.191Z,1520495367.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:27.589Z,1520495367.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:27.990Z,1520495367.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:28.394Z,1520495368.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:28.803Z,1520495368.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:29.206Z,1520495369.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:29.599Z,1520495369.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:29.994Z,1520495369.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:30.388Z,1520495370.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:30.791Z,1520495370.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:31.189Z,1520495371.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:31.602Z,1520495371.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:31.000Z,1520495372.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:32.399Z,1520495372.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:32.793Z,1520495372.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:33.202Z,1520495373.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:33.598Z,1520495373.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:33.989Z,1520495373.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:34.394Z,1520495374.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:34.803Z,1520495374.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:35.206Z,1520495375.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:35.610Z,1520495375.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:35.999Z,1520495375.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:36.393Z,1520495376.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:36.796Z,1520495376.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:37.191Z,1520495377.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:37.603Z,1520495377.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:38.011Z,1520495378.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:38.403Z,1520495378.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:38.788Z,1520495378.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:39.205Z,1520495379.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:39.598Z,1520495379.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:39.988Z,1520495379.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:40.390Z,1520495380.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:40.799Z,1520495380.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:41.202Z,1520495381.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:41.610Z,1520495381.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:41.991Z,1520495381.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:42.390Z,1520495382.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:42.795Z,1520495382.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:43.191Z,1520495383.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:43.602Z,1520495383.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:44.010Z,1520495384.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:44.403Z,1520495384.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:44.789Z,1520495384.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:45.195Z,1520495385.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:45.606Z,1520495385.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:45.993Z,1520495385.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:46.396Z,1520495386.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:46.800Z,1520495386.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:47.214Z,1520495387.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:47.605Z,1520495387.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:47.998Z,1520495387.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:48.387Z,1520495388.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:48.796Z,1520495388.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:49.200Z,1520495389.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:49.602Z,1520495389.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:50.004Z,1520495390.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:50.405Z,1520495390.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:50.797Z,1520495390.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:51.195Z,1520495391.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:51.595Z,1520495391.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:52.001Z,1520495392.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:52.388Z,1520495392.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:52.807Z,1520495392.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:53.208Z,1520495393.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:53.605Z,1520495393.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:54.001Z,1520495394.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:54.401Z,1520495394.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:54.782Z,1520495394.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:55.209Z,1520495395.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:55.611Z,1520495395.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:56.006Z,1520495396.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:56.408Z,1520495396.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:56.789Z,1520495396.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:57.183Z,1520495397.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:57.594Z,1520495397.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:58.070Z,1520495398.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:58.387Z,1520495398.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:58.818Z,1520495398.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:59.239Z,1520495399.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:49:59.594Z,1520495399.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:00.067Z,1520495400.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:00.387Z,1520495400.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:00.869Z,1520495400.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:01.191Z,1520495401.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:01.604Z,1520495401.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:01.991Z,1520495401.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:02.404Z,1520495402.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:02.793Z,1520495402.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:03.194Z,1520495403.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:03.674Z,1520495403.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:03.997Z,1520495403.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:04.388Z,1520495404.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:04.799Z,1520495404.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:05.200Z,1520495405.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:05.597Z,1520495405.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:05.993Z,1520495405.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:06.392Z,1520495406.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:06.798Z,1520495406.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:07.278Z,1520495407.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:07.602Z,1520495407.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:07.995Z,1520495407.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:08.490Z,1520495408.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:08.793Z,1520495408.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:09.188Z,1520495409.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:09.589Z,1520495409.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:09.991Z,1520495409.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:10.388Z,1520495410.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:10.798Z,1520495410.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:11.206Z,1520495411.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:11.596Z,1520495411.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:11.991Z,1520495411.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:12.389Z,1520495412.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:12.794Z,1520495412.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:13.194Z,1520495413.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:13.595Z,1520495413.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:14.079Z,1520495414.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:14.399Z,1520495414.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:14.793Z,1520495414.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:15.190Z,1520495415.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:15.589Z,1520495415.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:15.989Z,1520495415.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:16.387Z,1520495416.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:16.799Z,1520495416.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:17.206Z,1520495417.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:17.596Z,1520495417.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:17.999Z,1520495417.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:18.390Z,1520495418.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:18.794Z,1520495418.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:19.194Z,1520495419.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:19.596Z,1520495419.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:19.995Z,1520495419.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:20.396Z,1520495420.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:20.792Z,1520495420.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:21.196Z,1520495421.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:21.593Z,1520495421.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:21.993Z,1520495421.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:22.387Z,1520495422.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:22.808Z,1520495422.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:23.196Z,1520495423.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:23.596Z,1520495423.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:23.998Z,1520495423.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:24.392Z,1520495424.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:24.795Z,1520495424.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:25.194Z,1520495425.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:25.596Z,1520495425.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:25.996Z,1520495425.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:26.402Z,1520495426.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:26.793Z,1520495426.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:27.189Z,1520495427.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:27.596Z,1520495427.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:27.993Z,1520495427.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:28.389Z,1520495428.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:28.803Z,1520495428.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:29.206Z,1520495429.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:29.602Z,1520495429.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:29.994Z,1520495429.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:30.393Z,1520495430.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:30.795Z,1520495430.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:31.192Z,1520495431.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:31.604Z,1520495431.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:31.997Z,1520495431.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:32.410Z,1520495432.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:32.792Z,1520495432.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:33.190Z,1520495433.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:33.590Z,1520495433.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:33.993Z,1520495433.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:34.396Z,1520495434.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:34.803Z,1520495434.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:35.206Z,1520495435.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:35.600Z,1520495435.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:35.997Z,1520495435.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:36.391Z,1520495436.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:36.795Z,1520495436.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:37.198Z,1520495437.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:37.599Z,1520495437.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:38.000Z,1520495438.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:38.400Z,1520495438.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:38.401Z,1520495438.401 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:38.401Z,1520495438.401 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-03-08T07:50:38.401Z,1520495438.401 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T07:50:38.403Z,1520495438.403 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:38.403Z,1520495438.403 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-03-08T07:50:38.403Z,1520495438.403 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T07:50:38.416Z,1520495438.416 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T07:50:38.416Z,1520495438.416 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T07:50:38.799Z,1520495438.799 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:38.799Z,1520495438.799 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2018-03-08T07:50:38.799Z,1520495438.799 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T07:50:38.811Z,1520495438.811 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T07:50:38.811Z,1520495438.811 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T07:50:38.811Z,1520495438.811 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-03-08T07:50:38.811Z,1520495438.811 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T07:50:38.811Z,1520495438.811 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-03-08T07:50:39.201Z,1520495439.201 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T07:50:39.202Z,1520495439.202 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T07:50:39.202Z,1520495439.202 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T07:50:39.202Z,1520495439.202 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T07:50:39.203Z,1520495439.203 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T07:50:39.203Z,1520495439.203 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T07:50:39.214Z,1520495439.214 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T07:50:39.214Z,1520495439.214 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2018-03-08T07:50:39.595Z,1520495439.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T07:50:39.596Z,1520495439.596 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T07:50:39.596Z,1520495439.596 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T07:50:39.999Z,1520495439.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T07:50:39.000Z,1520495440.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:40.385Z,1520495440.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T07:50:40.386Z,1520495440.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:40.806Z,1520495440.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T07:50:40.807Z,1520495440.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:41.214Z,1520495441.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T07:50:41.215Z,1520495441.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:41.605Z,1520495441.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T07:50:41.606Z,1520495441.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:41.000Z,1520495442.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T07:50:42.005Z,1520495442.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:42.384Z,1520495442.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T07:50:42.408Z,1520495442.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:42.802Z,1520495442.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T07:50:42.803Z,1520495442.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:43.206Z,1520495443.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T07:50:43.207Z,1520495443.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:43.609Z,1520495443.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T07:50:43.610Z,1520495443.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:44.004Z,1520495444.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T07:50:44.009Z,1520495444.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:44.415Z,1520495444.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T07:50:44.416Z,1520495444.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:44.786Z,1520495444.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T07:50:44.787Z,1520495444.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:45.182Z,1520495445.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T07:50:45.183Z,1520495445.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:45.586Z,1520495445.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T07:50:45.587Z,1520495445.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:45.986Z,1520495445.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T07:50:45.987Z,1520495445.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:46.382Z,1520495446.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T07:50:46.383Z,1520495446.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:46.815Z,1520495446.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T07:50:46.816Z,1520495446.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:47.221Z,1520495447.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T07:50:47.222Z,1520495447.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:47.616Z,1520495447.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T07:50:47.621Z,1520495447.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:47.994Z,1520495447.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T07:50:47.995Z,1520495447.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:48.389Z,1520495448.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T07:50:48.390Z,1520495448.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:48.791Z,1520495448.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T07:50:48.792Z,1520495448.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:49.190Z,1520495449.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T07:50:49.191Z,1520495449.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:49.617Z,1520495449.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T07:50:49.618Z,1520495449.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:49.991Z,1520495449.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T07:50:49.992Z,1520495449.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:50.392Z,1520495450.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T07:50:50.393Z,1520495450.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:50.794Z,1520495450.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T07:50:50.795Z,1520495450.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:51.183Z,1520495451.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T07:50:51.185Z,1520495451.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:51.590Z,1520495451.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T07:50:51.591Z,1520495451.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:51.988Z,1520495451.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T07:50:51.989Z,1520495451.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:52.387Z,1520495452.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T07:50:52.388Z,1520495452.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:52.792Z,1520495452.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T07:50:52.794Z,1520495452.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:53.217Z,1520495453.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T07:50:53.218Z,1520495453.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:53.592Z,1520495453.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T07:50:53.593Z,1520495453.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:53.989Z,1520495453.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T07:50:53.990Z,1520495453.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:54.388Z,1520495454.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T07:50:54.389Z,1520495454.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:54.791Z,1520495454.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T07:50:54.791Z,1520495454.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:55.189Z,1520495455.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T07:50:55.190Z,1520495455.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:55.618Z,1520495455.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T07:50:55.619Z,1520495455.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:55.992Z,1520495455.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T07:50:55.993Z,1520495455.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:56.417Z,1520495456.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T07:50:56.418Z,1520495456.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:56.795Z,1520495456.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T07:50:56.796Z,1520495456.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:57.193Z,1520495457.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T07:50:57.194Z,1520495457.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:57.591Z,1520495457.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T07:50:57.592Z,1520495457.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:57.998Z,1520495457.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T07:50:57.999Z,1520495457.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:58.393Z,1520495458.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T07:50:58.394Z,1520495458.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:58.398Z,1520495458.398 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T07:45:58.4Z
2018-03-08T07:50:58.398Z,1520495458.398 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T07:50:58.398Z,1520495458.398 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T07:50:58.799Z,1520495458.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:58.803Z,1520495458.803 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2018-03-08T07:50:59.211Z,1520495459.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:59.606Z,1520495459.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:50:59.999Z,1520495459.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:00.399Z,1520495460.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:00.796Z,1520495460.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:01.198Z,1520495461.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:01.594Z,1520495461.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:01.994Z,1520495461.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:02.391Z,1520495462.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:02.803Z,1520495462.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:03.197Z,1520495463.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:03.591Z,1520495463.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:03.996Z,1520495463.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:04.392Z,1520495464.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:04.793Z,1520495464.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:05.194Z,1520495465.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:05.593Z,1520495465.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:05.996Z,1520495465.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:06.402Z,1520495466.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:06.793Z,1520495466.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:07.201Z,1520495467.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:07.594Z,1520495467.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:07.994Z,1520495467.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:08.403Z,1520495468.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:08.798Z,1520495468.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:09.207Z,1520495469.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:09.607Z,1520495469.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:09.981Z,1520495469.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:10.205Z,1520495470.205 [CommandLine](IMPORTANT): got command failComponent
2018-03-08T07:51:10.205Z,1520495470.205 [CommandLine](IMPORTANT): Failed components:
2018-03-08T07:51:10.206Z,1520495470.206 [CommandLine](IMPORTANT): DropWeight: Hardware Fault
2018-03-08T07:51:10.381Z,1520495470.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:10.815Z,1520495470.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:11.185Z,1520495471.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:11.589Z,1520495471.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:11.994Z,1520495471.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:12.385Z,1520495472.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:12.789Z,1520495472.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:13.189Z,1520495473.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:13.587Z,1520495473.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:13.991Z,1520495473.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:14.390Z,1520495474.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:14.786Z,1520495474.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:15.191Z,1520495475.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:15.592Z,1520495475.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:15.989Z,1520495475.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:16.386Z,1520495476.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:16.789Z,1520495476.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:17.188Z,1520495477.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:17.589Z,1520495477.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:17.994Z,1520495477.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:18.390Z,1520495478.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:18.787Z,1520495478.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:19.195Z,1520495479.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:19.586Z,1520495479.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:19.990Z,1520495479.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:20.395Z,1520495480.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:20.786Z,1520495480.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:21.190Z,1520495481.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:21.591Z,1520495481.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:21.990Z,1520495481.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:22.391Z,1520495482.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:22.790Z,1520495482.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:23.186Z,1520495483.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:23.591Z,1520495483.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:23.995Z,1520495483.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:24.390Z,1520495484.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:24.789Z,1520495484.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:25.191Z,1520495485.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:25.588Z,1520495485.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:25.990Z,1520495485.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:26.389Z,1520495486.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:26.790Z,1520495486.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:27.191Z,1520495487.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:27.588Z,1520495487.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:27.988Z,1520495487.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:28.392Z,1520495488.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:28.787Z,1520495488.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:29.201Z,1520495489.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:29.593Z,1520495489.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:29.954Z,1520495489.954 [NAL9602](ERROR): Queried for signal strength and failed to receive proper response. 
2018-03-08T07:51:30.029Z,1520495490.029 [NAL9602](ERROR): received: 
+CSQ:0

OK
2018-03-08T07:51:30.029Z,1520495490.029 [NAL9602] Data Fault, FailCount= 1
2018-03-08T07:51:30.029Z,1520495490.029 [NAL9602](ERROR): Data Fault
2018-03-08T07:51:30.095Z,1520495490.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:30.121Z,1520495490.121 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T07:51:30.354Z,1520495490.354 [NAL9602](INFO): Powering down
2018-03-08T07:51:30.403Z,1520495490.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:30.790Z,1520495490.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:31.199Z,1520495491.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:31.212Z,1520495491.212 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T07:51:31.212Z,1520495491.212 [NAL9602] No Fault, FailCount= 1
2018-03-08T07:51:31.592Z,1520495491.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:31.993Z,1520495491.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:32.391Z,1520495492.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:32.792Z,1520495492.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:33.195Z,1520495493.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:33.594Z,1520495493.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:33.986Z,1520495493.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:34.388Z,1520495494.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:34.796Z,1520495494.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:35.197Z,1520495495.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:35.632Z,1520495495.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:35.991Z,1520495495.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:36.388Z,1520495496.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:36.793Z,1520495496.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:36.806Z,1520495496.806 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T07:51:37.190Z,1520495497.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:37.589Z,1520495497.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:37.994Z,1520495497.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:38.393Z,1520495498.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:38.789Z,1520495498.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:39.193Z,1520495499.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:39.598Z,1520495499.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:39.989Z,1520495499.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:40.393Z,1520495500.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:40.790Z,1520495500.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:41.189Z,1520495501.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:41.593Z,1520495501.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:41.991Z,1520495501.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:42.386Z,1520495502.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:42.795Z,1520495502.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:43.190Z,1520495503.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:43.598Z,1520495503.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:43.990Z,1520495503.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:44.398Z,1520495504.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:44.796Z,1520495504.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:45.189Z,1520495505.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:45.593Z,1520495505.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:45.991Z,1520495505.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:46.389Z,1520495506.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:46.792Z,1520495506.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:47.194Z,1520495507.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:47.601Z,1520495507.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:47.991Z,1520495507.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:48.390Z,1520495508.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:48.794Z,1520495508.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:49.199Z,1520495509.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:49.593Z,1520495509.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:49.988Z,1520495509.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:50.401Z,1520495510.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:50.792Z,1520495510.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:51.188Z,1520495511.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:51.599Z,1520495511.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:51.995Z,1520495511.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:52.391Z,1520495512.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:52.794Z,1520495512.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:53.191Z,1520495513.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:53.586Z,1520495513.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:53.994Z,1520495513.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:54.391Z,1520495514.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:54.795Z,1520495514.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:55.213Z,1520495515.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:55.594Z,1520495515.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:55.996Z,1520495515.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:56.394Z,1520495516.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:56.793Z,1520495516.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:57.197Z,1520495517.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:57.595Z,1520495517.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:57.993Z,1520495517.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:58.383Z,1520495518.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:58.799Z,1520495518.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:59.199Z,1520495519.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:59.594Z,1520495519.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:51:59.998Z,1520495519.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:00.397Z,1520495520.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:00.754Z,1520495520.754 [NAL9602](INFO): Powering up NAL9602
2018-03-08T07:52:00.802Z,1520495520.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:01.196Z,1520495521.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:01.602Z,1520495521.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:01.978Z,1520495521.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:02.402Z,1520495522.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:02.784Z,1520495522.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:03.176Z,1520495523.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:03.608Z,1520495523.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:03.985Z,1520495523.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:04.385Z,1520495524.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:04.811Z,1520495524.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:05.189Z,1520495525.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:05.593Z,1520495525.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:05.986Z,1520495525.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:06.389Z,1520495526.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:06.787Z,1520495526.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:07.208Z,1520495527.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:07.590Z,1520495527.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:07.986Z,1520495527.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:08.390Z,1520495528.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:08.790Z,1520495528.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:09.186Z,1520495529.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:09.594Z,1520495529.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:09.989Z,1520495529.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:10.386Z,1520495530.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:10.790Z,1520495530.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:11.188Z,1520495531.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:11.604Z,1520495531.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:11.954Z,1520495531.954 [NAL9602](INFO): NAL9602 initialized
2018-03-08T07:52:11.999Z,1520495531.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:12.388Z,1520495532.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:12.795Z,1520495532.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:13.208Z,1520495533.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:13.596Z,1520495533.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:13.987Z,1520495533.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:14.390Z,1520495534.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:14.793Z,1520495534.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:15.224Z,1520495535.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:15.607Z,1520495535.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:20.256Z,1520495540.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:20.380Z,1520495540.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:20.711Z,1520495540.711 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T07:52:20.711Z,1520495540.711 [NAL9602] Data Fault, FailCount= 2
2018-03-08T07:52:20.711Z,1520495540.711 [NAL9602](ERROR): Data Fault
2018-03-08T07:52:20.771Z,1520495540.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:20.801Z,1520495540.801 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T07:52:21.113Z,1520495541.113 [NAL9602](INFO): Powering down
2018-03-08T07:52:21.179Z,1520495541.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:21.557Z,1520495541.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:21.961Z,1520495541.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:21.982Z,1520495541.982 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T07:52:21.982Z,1520495541.982 [NAL9602] No Fault, FailCount= 2
2018-03-08T07:52:22.354Z,1520495542.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:22.755Z,1520495542.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:23.157Z,1520495543.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:23.556Z,1520495543.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:23.947Z,1520495543.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:24.352Z,1520495544.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:24.754Z,1520495544.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:25.155Z,1520495545.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:25.558Z,1520495545.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:25.953Z,1520495545.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:26.356Z,1520495546.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:26.753Z,1520495546.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:27.148Z,1520495547.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:27.553Z,1520495547.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:27.954Z,1520495547.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:28.354Z,1520495548.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:28.754Z,1520495548.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:29.154Z,1520495549.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:29.558Z,1520495549.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:29.948Z,1520495549.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:30.352Z,1520495550.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:30.751Z,1520495550.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:31.152Z,1520495551.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:31.555Z,1520495551.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:31.949Z,1520495551.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:32.366Z,1520495552.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:32.774Z,1520495552.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:33.150Z,1520495553.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:33.561Z,1520495553.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:33.955Z,1520495553.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:34.350Z,1520495554.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:34.750Z,1520495554.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:35.157Z,1520495555.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:35.557Z,1520495555.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:35.958Z,1520495555.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:36.357Z,1520495556.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:36.759Z,1520495556.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:37.162Z,1520495557.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:37.555Z,1520495557.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:37.957Z,1520495557.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:38.361Z,1520495558.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:38.762Z,1520495558.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:39.158Z,1520495559.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:39.578Z,1520495559.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:39.958Z,1520495559.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:40.359Z,1520495560.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:40.757Z,1520495560.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:41.158Z,1520495561.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:41.557Z,1520495561.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:41.958Z,1520495561.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:42.353Z,1520495562.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:42.757Z,1520495562.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:43.154Z,1520495563.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:43.566Z,1520495563.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:43.959Z,1520495563.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:44.338Z,1520495564.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:44.743Z,1520495564.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:45.168Z,1520495565.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:45.545Z,1520495565.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:45.968Z,1520495565.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:46.369Z,1520495566.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:46.766Z,1520495566.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:47.170Z,1520495567.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:47.570Z,1520495567.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:47.941Z,1520495567.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:48.367Z,1520495568.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:48.769Z,1520495568.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:49.143Z,1520495569.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:49.550Z,1520495569.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:49.952Z,1520495569.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:50.344Z,1520495570.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:50.751Z,1520495570.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:51.116Z,1520495571.116 [NAL9602](INFO): Powering up NAL9602
2018-03-08T07:52:51.148Z,1520495571.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:51.571Z,1520495571.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:51.969Z,1520495571.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:52.353Z,1520495572.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:52.748Z,1520495572.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:53.154Z,1520495573.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:53.552Z,1520495573.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:53.946Z,1520495573.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:54.354Z,1520495574.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:54.754Z,1520495574.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:55.146Z,1520495575.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:55.554Z,1520495575.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:55.949Z,1520495575.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:56.354Z,1520495576.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:56.744Z,1520495576.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:57.147Z,1520495577.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:57.540Z,1520495577.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:57.962Z,1520495577.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:58.355Z,1520495578.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:58.748Z,1520495578.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:59.205Z,1520495579.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:59.559Z,1520495579.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:52:59.958Z,1520495579.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:00.370Z,1520495580.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:00.758Z,1520495580.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:01.161Z,1520495581.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:04.253Z,1520495584.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:04.378Z,1520495584.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:04.692Z,1520495584.692 [NAL9602](INFO): NAL9602 initialized
2018-03-08T07:53:04.759Z,1520495584.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:05.123Z,1520495585.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:05.486Z,1520495585.486 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.008269
2018-03-08T07:53:05.552Z,1520495585.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:06.022Z,1520495586.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:06.343Z,1520495586.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:09.438Z,1520495589.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:09.558Z,1520495589.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:09.869Z,1520495589.869 [DataOverHttps](INFO): Sending 195 bytes from file Logs/20180308T071118/Courier0004.lzma
2018-03-08T07:53:09.939Z,1520495589.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:10.347Z,1520495590.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:10.667Z,1520495590.667 [DataOverHttps](INFO): Moved sent file to Logs/20180308T071118/Courier0004.lzma.bak
2018-03-08T07:53:10.667Z,1520495590.667 [DataOverHttps](INFO): SBD MOMSN=7983493
2018-03-08T07:53:10.751Z,1520495590.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:11.228Z,1520495591.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:11.530Z,1520495591.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:14.616Z,1520495594.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:14.751Z,1520495594.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:15.119Z,1520495595.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:15.503Z,1520495595.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:15.885Z,1520495595.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:16.282Z,1520495596.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:16.686Z,1520495596.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:17.101Z,1520495597.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:20.212Z,1520495600.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:20.353Z,1520495600.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:20.641Z,1520495600.641 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T071118/Courier0008.lzma
2018-03-08T07:53:20.701Z,1520495600.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:21.083Z,1520495601.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:21.439Z,1520495601.439 [DataOverHttps](INFO): Moved sent file to Logs/20180308T071118/Courier0008.lzma.bak
2018-03-08T07:53:21.439Z,1520495601.439 [DataOverHttps](INFO): SBD MOMSN=7983495
2018-03-08T07:53:21.506Z,1520495601.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:21.987Z,1520495601.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:22.312Z,1520495602.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:25.383Z,1520495605.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:25.522Z,1520495605.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:25.866Z,1520495605.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:26.268Z,1520495606.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:26.672Z,1520495606.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:27.071Z,1520495607.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:27.482Z,1520495607.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:30.550Z,1520495610.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:30.683Z,1520495610.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:31.016Z,1520495611.016 [DataOverHttps](INFO): Sending 155 bytes from file Logs/20180308T072732/Courier0000.lzma
2018-03-08T07:53:31.054Z,1520495611.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:31.453Z,1520495611.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:31.815Z,1520495611.815 [DataOverHttps](INFO): Moved sent file to Logs/20180308T072732/Courier0000.lzma.bak
2018-03-08T07:53:31.815Z,1520495611.815 [DataOverHttps](INFO): SBD MOMSN=7983497
2018-03-08T07:53:31.859Z,1520495611.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:32.353Z,1520495612.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:32.682Z,1520495612.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:35.794Z,1520495615.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:35.934Z,1520495615.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:36.263Z,1520495616.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:36.661Z,1520495616.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:37.087Z,1520495617.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:37.463Z,1520495617.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:37.861Z,1520495617.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:40.962Z,1520495620.962 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:40.962Z,1520495620.962 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4
2018-03-08T07:53:40.962Z,1520495620.962 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T07:53:40.963Z,1520495620.963 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:40.964Z,1520495620.964 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-03-08T07:53:40.964Z,1520495620.964 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T07:53:40.965Z,1520495620.965 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:40.966Z,1520495620.966 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-03-08T07:53:40.966Z,1520495620.966 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T07:53:41.006Z,1520495621.006 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T07:53:41.006Z,1520495621.006 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T07:53:41.006Z,1520495621.006 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T07:53:41.119Z,1520495621.119 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T07:53:41.119Z,1520495621.119 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4
2018-03-08T07:53:41.119Z,1520495621.119 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T07:53:41.119Z,1520495621.119 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-03-08T07:53:41.120Z,1520495621.120 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T07:53:41.120Z,1520495621.120 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-03-08T07:53:41.429Z,1520495621.429 [DataOverHttps](INFO): Sending 195 bytes from file Logs/20180308T072732/Courier0004.lzma
2018-03-08T07:53:41.488Z,1520495621.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T07:53:41.488Z,1520495621.488 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T07:53:41.489Z,1520495621.489 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T07:53:41.489Z,1520495621.489 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T07:53:41.489Z,1520495621.489 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T07:53:41.490Z,1520495621.490 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T07:53:41.490Z,1520495621.490 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T07:53:41.490Z,1520495621.490 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T07:53:41.491Z,1520495621.491 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T07:53:41.868Z,1520495621.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-03-08T07:53:41.869Z,1520495621.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:42.219Z,1520495622.219 [DataOverHttps](INFO): Moved sent file to Logs/20180308T072732/Courier0004.lzma.bak
2018-03-08T07:53:42.219Z,1520495622.219 [DataOverHttps](INFO): SBD MOMSN=7983503
2018-03-08T07:53:42.285Z,1520495622.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-03-08T07:53:42.286Z,1520495622.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:42.742Z,1520495622.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2018-03-08T07:53:42.743Z,1520495622.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:43.076Z,1520495623.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-03-08T07:53:43.077Z,1520495623.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:46.174Z,1520495626.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T07:53:46.175Z,1520495626.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:46.318Z,1520495626.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2018-03-08T07:53:46.319Z,1520495626.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:46.670Z,1520495626.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T07:53:46.671Z,1520495626.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:47.044Z,1520495627.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T07:53:47.045Z,1520495627.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:47.451Z,1520495627.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-08T07:53:47.452Z,1520495627.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:47.846Z,1520495627.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-08T07:53:47.847Z,1520495627.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:48.276Z,1520495628.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-08T07:53:48.277Z,1520495628.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:51.377Z,1520495631.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T07:53:51.378Z,1520495631.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:51.525Z,1520495631.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2018-03-08T07:53:51.526Z,1520495631.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:51.809Z,1520495631.809 [DataOverHttps](INFO): Sending 132 bytes from file Logs/20180308T073656/Courier0000.lzma
2018-03-08T07:53:51.868Z,1520495631.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T07:53:51.869Z,1520495631.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:52.261Z,1520495632.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T07:53:52.262Z,1520495632.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:52.607Z,1520495632.607 [DataOverHttps](INFO): Moved sent file to Logs/20180308T073656/Courier0000.lzma.bak
2018-03-08T07:53:52.607Z,1520495632.607 [DataOverHttps](INFO): SBD MOMSN=7983505
2018-03-08T07:53:52.670Z,1520495632.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T07:53:52.671Z,1520495632.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:53.146Z,1520495633.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2018-03-08T07:53:53.147Z,1520495633.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:53.471Z,1520495633.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T07:53:53.472Z,1520495633.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:56.550Z,1520495636.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T07:53:56.550Z,1520495636.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:56.694Z,1520495636.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T07:53:56.695Z,1520495636.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:57.054Z,1520495637.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T07:53:57.055Z,1520495637.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:57.450Z,1520495637.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T07:53:57.451Z,1520495637.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:57.858Z,1520495637.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T07:53:57.859Z,1520495637.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:58.259Z,1520495638.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-08T07:53:58.260Z,1520495638.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:53:58.658Z,1520495638.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T07:53:58.659Z,1520495638.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:01.754Z,1520495641.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:01.890Z,1520495641.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:02.217Z,1520495642.217 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T073656/Courier0004.lzma
2018-03-08T07:54:02.277Z,1520495642.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:02.658Z,1520495642.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:03.011Z,1520495643.011 [DataOverHttps](INFO): Moved sent file to Logs/20180308T073656/Courier0004.lzma.bak
2018-03-08T07:54:03.011Z,1520495643.011 [DataOverHttps](INFO): SBD MOMSN=7983510
2018-03-08T07:54:03.079Z,1520495643.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:03.563Z,1520495643.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:03.888Z,1520495643.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:06.946Z,1520495646.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:07.089Z,1520495647.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:07.446Z,1520495647.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:07.841Z,1520495647.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:08.241Z,1520495648.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:08.616Z,1520495648.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:09.018Z,1520495649.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:12.119Z,1520495652.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:12.254Z,1520495652.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:12.577Z,1520495652.577 [DataOverHttps](INFO): Sending 133 bytes from file Logs/20180308T074127/Courier0000.lzma
2018-03-08T07:54:12.649Z,1520495652.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:13.020Z,1520495653.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:13.375Z,1520495653.375 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0000.lzma.bak
2018-03-08T07:54:13.375Z,1520495653.375 [DataOverHttps](INFO): SBD MOMSN=7983512
2018-03-08T07:54:13.456Z,1520495653.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:13.903Z,1520495653.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:14.220Z,1520495654.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:17.320Z,1520495657.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:17.463Z,1520495657.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:17.853Z,1520495657.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:18.230Z,1520495658.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:18.622Z,1520495658.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:19.022Z,1520495659.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:19.419Z,1520495659.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:22.778Z,1520495662.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:22.931Z,1520495662.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:23.229Z,1520495663.229 [DataOverHttps](INFO): Sending 195 bytes from file Logs/20180308T074127/Courier0004.lzma
2018-03-08T07:54:23.283Z,1520495663.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:23.677Z,1520495663.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:24.027Z,1520495664.027 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0004.lzma.bak
2018-03-08T07:54:24.027Z,1520495664.027 [DataOverHttps](INFO): SBD MOMSN=7983517
2018-03-08T07:54:24.098Z,1520495664.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:24.716Z,1520495664.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:24.872Z,1520495664.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:25.294Z,1520495665.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:28.422Z,1520495668.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:28.567Z,1520495668.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:28.895Z,1520495668.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:29.296Z,1520495669.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:29.693Z,1520495669.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:30.117Z,1520495670.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:30.516Z,1520495670.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:30.895Z,1520495670.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:31.295Z,1520495671.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:31.696Z,1520495671.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:34.784Z,1520495674.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:34.919Z,1520495674.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:35.217Z,1520495675.217 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20180308T070839/Express0001.lzma
2018-03-08T07:54:35.287Z,1520495675.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:35.673Z,1520495675.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:36.014Z,1520495676.014 [DataOverHttps](INFO): Moved sent file to Logs/20180308T070839/Express0001.lzma.bak
2018-03-08T07:54:36.015Z,1520495676.015 [DataOverHttps](INFO): SBD MOMSN=7983519
2018-03-08T07:54:36.079Z,1520495676.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:36.624Z,1520495676.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:36.849Z,1520495676.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:39.976Z,1520495679.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:40.123Z,1520495680.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:40.478Z,1520495680.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:40.845Z,1520495680.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:41.247Z,1520495681.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:41.645Z,1520495681.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:42.041Z,1520495682.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:45.145Z,1520495685.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:45.283Z,1520495685.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:45.587Z,1520495685.587 [DataOverHttps](INFO): Sending 704 bytes from file Logs/20180308T071118/Express0001.lzma
2018-03-08T07:54:45.678Z,1520495685.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:46.008Z,1520495686.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:46.371Z,1520495686.371 [DataOverHttps](INFO): Moved sent file to Logs/20180308T071118/Express0001.lzma.bak
2018-03-08T07:54:46.371Z,1520495686.371 [DataOverHttps](INFO): SBD MOMSN=7983522
2018-03-08T07:54:46.463Z,1520495686.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:46.991Z,1520495686.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:47.239Z,1520495687.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:50.954Z,1520495690.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:51.102Z,1520495691.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:51.446Z,1520495691.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:51.825Z,1520495691.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:52.251Z,1520495692.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:52.634Z,1520495692.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:53.022Z,1520495693.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:56.129Z,1520495696.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:56.282Z,1520495696.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:56.580Z,1520495696.580 [DataOverHttps](INFO): Sending 1108 bytes from file Logs/20180308T071118/Express0005.lzma
2018-03-08T07:54:56.659Z,1520495696.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:57.016Z,1520495697.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:57.379Z,1520495697.379 [DataOverHttps](INFO): Moved sent file to Logs/20180308T071118/Express0005.lzma.bak
2018-03-08T07:54:57.379Z,1520495697.379 [DataOverHttps](INFO): SBD MOMSN=7983539
2018-03-08T07:54:57.438Z,1520495697.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:57.983Z,1520495697.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:54:58.234Z,1520495698.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:01.332Z,1520495701.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:01.483Z,1520495701.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:01.873Z,1520495701.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:02.233Z,1520495702.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:02.646Z,1520495702.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:03.033Z,1520495703.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:03.439Z,1520495703.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:06.765Z,1520495706.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:06.846Z,1520495706.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:07.717Z,1520495707.717 [DataOverHttps](INFO): Sending 815 bytes from file Logs/20180308T071118/Express0009.lzma
2018-03-08T07:55:07.766Z,1520495707.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:07.894Z,1520495707.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:08.244Z,1520495708.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:08.610Z,1520495708.610 [DataOverHttps](INFO): Moved sent file to Logs/20180308T071118/Express0009.lzma.bak
2018-03-08T07:55:08.610Z,1520495708.610 [DataOverHttps](INFO): SBD MOMSN=7983603
2018-03-08T07:55:08.718Z,1520495708.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:09.216Z,1520495709.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:09.454Z,1520495709.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:12.598Z,1520495712.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:12.719Z,1520495712.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:13.100Z,1520495713.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:13.514Z,1520495713.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:13.899Z,1520495713.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:14.283Z,1520495714.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:14.682Z,1520495714.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:17.775Z,1520495717.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:17.910Z,1520495717.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:18.219Z,1520495718.219 [DataOverHttps](INFO): Sending 883 bytes from file Logs/20180308T072732/Express0001.lzma
2018-03-08T07:55:18.410Z,1520495718.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:18.676Z,1520495718.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:19.019Z,1520495719.019 [DataOverHttps](INFO): Moved sent file to Logs/20180308T072732/Express0001.lzma.bak
2018-03-08T07:55:19.019Z,1520495719.019 [DataOverHttps](INFO): SBD MOMSN=7983635
2018-03-08T07:55:19.085Z,1520495719.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:19.624Z,1520495719.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:19.883Z,1520495719.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:22.974Z,1520495722.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:23.117Z,1520495723.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:23.462Z,1520495723.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:23.859Z,1520495723.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:24.243Z,1520495724.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:24.643Z,1520495724.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:25.045Z,1520495725.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:28.165Z,1520495728.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:28.298Z,1520495728.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:28.673Z,1520495728.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:29.070Z,1520495729.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:29.455Z,1520495729.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:29.846Z,1520495729.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:30.244Z,1520495730.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:33.356Z,1520495733.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:33.518Z,1520495733.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:33.841Z,1520495733.841 [DataOverHttps](INFO): Sending 1517 bytes from file Logs/20180308T072732/Express0005.lzma
2018-03-08T07:55:33.918Z,1520495733.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:34.277Z,1520495734.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:34.627Z,1520495734.627 [DataOverHttps](INFO): Moved sent file to Logs/20180308T072732/Express0005.lzma.bak
2018-03-08T07:55:34.627Z,1520495734.627 [DataOverHttps](INFO): SBD MOMSN=7983668
2018-03-08T07:55:34.705Z,1520495734.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:35.265Z,1520495735.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:35.510Z,1520495735.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:38.584Z,1520495738.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:38.731Z,1520495738.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:39.081Z,1520495739.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:39.482Z,1520495739.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:39.884Z,1520495739.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:40.283Z,1520495740.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:40.689Z,1520495740.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:43.791Z,1520495743.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:43.927Z,1520495743.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:44.238Z,1520495744.238 [DataOverHttps](INFO): Sending 788 bytes from file Logs/20180308T073656/Express0001.lzma
2018-03-08T07:55:44.314Z,1520495744.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:44.683Z,1520495744.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:45.035Z,1520495745.035 [DataOverHttps](INFO): Moved sent file to Logs/20180308T073656/Express0001.lzma.bak
2018-03-08T07:55:45.035Z,1520495745.035 [DataOverHttps](INFO): SBD MOMSN=7983821
2018-03-08T07:55:45.118Z,1520495745.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:45.656Z,1520495745.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:45.902Z,1520495745.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:46.302Z,1520495746.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:49.374Z,1520495749.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:49.503Z,1520495749.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:49.871Z,1520495749.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:50.274Z,1520495750.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:50.671Z,1520495750.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:51.047Z,1520495751.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:51.446Z,1520495751.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:54.540Z,1520495754.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:54.678Z,1520495754.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:54.973Z,1520495754.973 [DataOverHttps](INFO): Sending 106 bytes from file Logs/20180308T073656/Express0005.lzma
2018-03-08T07:55:55.042Z,1520495755.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:55.428Z,1520495755.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:55.767Z,1520495755.767 [DataOverHttps](INFO): Moved sent file to Logs/20180308T073656/Express0005.lzma.bak
2018-03-08T07:55:55.767Z,1520495755.767 [DataOverHttps](INFO): SBD MOMSN=7983842
2018-03-08T07:55:55.851Z,1520495755.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:56.385Z,1520495756.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:56.634Z,1520495756.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:59.696Z,1520495759.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:55:59.834Z,1520495759.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:00.212Z,1520495760.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:00.605Z,1520495760.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:00.996Z,1520495760.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:01.398Z,1520495761.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:01.794Z,1520495761.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:04.887Z,1520495764.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:05.034Z,1520495765.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:05.319Z,1520495765.319 [DataOverHttps](INFO): Sending 734 bytes from file Logs/20180308T074127/Express0001.lzma
2018-03-08T07:56:05.385Z,1520495765.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:05.780Z,1520495765.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:06.115Z,1520495766.115 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0001.lzma.bak
2018-03-08T07:56:06.115Z,1520495766.115 [DataOverHttps](INFO): SBD MOMSN=7983846
2018-03-08T07:56:06.180Z,1520495766.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:06.746Z,1520495766.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:06.956Z,1520495766.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:10.084Z,1520495770.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:10.215Z,1520495770.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:10.582Z,1520495770.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:10.954Z,1520495770.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:11.359Z,1520495771.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:11.757Z,1520495771.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:12.154Z,1520495772.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:15.254Z,1520495775.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:15.398Z,1520495775.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:15.705Z,1520495775.705 [DataOverHttps](INFO): Sending 176 bytes from file Logs/20180308T074127/Express0005.lzma
2018-03-08T07:56:15.764Z,1520495775.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:16.154Z,1520495776.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:16.503Z,1520495776.503 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0005.lzma.bak
2018-03-08T07:56:16.503Z,1520495776.503 [DataOverHttps](INFO): SBD MOMSN=7983862
2018-03-08T07:56:16.568Z,1520495776.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:17.108Z,1520495777.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:17.111Z,1520495777.111 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T07:56:17.111Z,1520495777.111 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T07:56:17.111Z,1520495777.111 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T07:56:17.354Z,1520495777.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:20.454Z,1520495780.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:20.598Z,1520495780.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:20.951Z,1520495780.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:21.346Z,1520495781.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:21.743Z,1520495781.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:22.119Z,1520495782.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:22.525Z,1520495782.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:22.952Z,1520495782.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:23.351Z,1520495783.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:23.736Z,1520495783.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:24.123Z,1520495784.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:24.527Z,1520495784.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:24.923Z,1520495784.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:25.322Z,1520495785.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:25.753Z,1520495785.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:26.140Z,1520495786.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:26.532Z,1520495786.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:26.927Z,1520495786.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:27.326Z,1520495787.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:27.731Z,1520495787.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:28.131Z,1520495788.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:28.530Z,1520495788.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:28.933Z,1520495788.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:29.337Z,1520495789.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:29.739Z,1520495789.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:30.135Z,1520495790.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:30.528Z,1520495790.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:30.934Z,1520495790.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:31.399Z,1520495791.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:31.732Z,1520495791.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:32.136Z,1520495792.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:32.528Z,1520495792.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:32.921Z,1520495792.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:33.315Z,1520495793.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:33.723Z,1520495793.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:34.140Z,1520495794.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:34.523Z,1520495794.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:34.925Z,1520495794.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:35.339Z,1520495795.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:35.749Z,1520495795.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:36.135Z,1520495796.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:36.527Z,1520495796.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:36.937Z,1520495796.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:37.332Z,1520495797.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:37.738Z,1520495797.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:38.137Z,1520495798.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:38.539Z,1520495798.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:38.553Z,1520495798.553 [CBIT](INFO): Clearing failed state for component DropWeight
2018-03-08T07:56:38.553Z,1520495798.553 [DropWeight] No Fault, FailCount= 1
2018-03-08T07:56:38.936Z,1520495798.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:39.334Z,1520495799.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:39.733Z,1520495799.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:40.129Z,1520495800.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:40.529Z,1520495800.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:40.937Z,1520495800.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:41.341Z,1520495801.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:41.741Z,1520495801.741 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:41.741Z,1520495801.741 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5
2018-03-08T07:56:41.741Z,1520495801.741 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T07:56:41.742Z,1520495801.742 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:41.743Z,1520495801.743 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-03-08T07:56:41.743Z,1520495801.743 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T07:56:41.744Z,1520495801.744 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:41.745Z,1520495801.745 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-03-08T07:56:41.745Z,1520495801.745 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T07:56:41.757Z,1520495801.757 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T07:56:41.757Z,1520495801.757 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T07:56:41.757Z,1520495801.757 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T07:56:42.144Z,1520495802.144 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T07:56:42.144Z,1520495802.144 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5
2018-03-08T07:56:42.144Z,1520495802.144 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T07:56:42.144Z,1520495802.144 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-03-08T07:56:42.145Z,1520495802.145 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T07:56:42.145Z,1520495802.145 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-03-08T07:56:42.537Z,1520495802.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T07:56:42.537Z,1520495802.537 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T07:56:42.538Z,1520495802.538 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T07:56:42.538Z,1520495802.538 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T07:56:42.538Z,1520495802.538 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T07:56:42.539Z,1520495802.539 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T07:56:42.539Z,1520495802.539 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T07:56:42.540Z,1520495802.540 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T07:56:42.540Z,1520495802.540 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T07:56:42.943Z,1520495802.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T07:56:42.944Z,1520495802.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:43.341Z,1520495803.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T07:56:43.342Z,1520495803.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:43.750Z,1520495803.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T07:56:43.751Z,1520495803.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:44.146Z,1520495804.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T07:56:44.147Z,1520495804.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:44.550Z,1520495804.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T07:56:44.551Z,1520495804.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:44.942Z,1520495804.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T07:56:44.942Z,1520495804.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:45.339Z,1520495805.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T07:56:45.340Z,1520495805.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:45.727Z,1520495805.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T07:56:45.728Z,1520495805.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:46.182Z,1520495806.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T07:56:46.183Z,1520495806.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:46.525Z,1520495806.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T07:56:46.525Z,1520495806.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:46.924Z,1520495806.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T07:56:46.925Z,1520495806.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:47.355Z,1520495807.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T07:56:47.355Z,1520495807.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:47.801Z,1520495807.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T07:56:47.802Z,1520495807.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:48.154Z,1520495808.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T07:56:48.155Z,1520495808.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:48.557Z,1520495808.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T07:56:48.558Z,1520495808.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:48.927Z,1520495808.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T07:56:48.928Z,1520495808.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:49.323Z,1520495809.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T07:56:49.324Z,1520495809.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:49.754Z,1520495809.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T07:56:49.755Z,1520495809.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:50.155Z,1520495810.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T07:56:50.156Z,1520495810.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:50.524Z,1520495810.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T07:56:50.525Z,1520495810.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:50.925Z,1520495810.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T07:56:50.926Z,1520495810.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:51.326Z,1520495811.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T07:56:51.327Z,1520495811.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:51.723Z,1520495811.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T07:56:51.724Z,1520495811.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:52.128Z,1520495812.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T07:56:52.129Z,1520495812.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:52.522Z,1520495812.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T07:56:52.523Z,1520495812.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:52.928Z,1520495812.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T07:56:52.929Z,1520495812.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:53.336Z,1520495813.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T07:56:53.358Z,1520495813.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:53.754Z,1520495813.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T07:56:53.755Z,1520495813.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:54.121Z,1520495814.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T07:56:54.122Z,1520495814.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:54.527Z,1520495814.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T07:56:54.527Z,1520495814.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:54.927Z,1520495814.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T07:56:54.928Z,1520495814.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:55.323Z,1520495815.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T07:56:55.324Z,1520495815.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:55.754Z,1520495815.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T07:56:55.755Z,1520495815.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:56.149Z,1520495816.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T07:56:56.150Z,1520495816.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:56.528Z,1520495816.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T07:56:56.529Z,1520495816.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:56.927Z,1520495816.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T07:56:56.928Z,1520495816.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:57.330Z,1520495817.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T07:56:57.331Z,1520495817.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:57.727Z,1520495817.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T07:56:57.728Z,1520495817.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:58.128Z,1520495818.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T07:56:58.129Z,1520495818.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:58.526Z,1520495818.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T07:56:58.527Z,1520495818.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:58.935Z,1520495818.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T07:56:58.936Z,1520495818.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:59.340Z,1520495819.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T07:56:59.357Z,1520495819.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:56:59.731Z,1520495819.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T07:56:59.733Z,1520495819.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:00.123Z,1520495820.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T07:57:00.124Z,1520495820.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:00.526Z,1520495820.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T07:57:00.527Z,1520495820.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:00.932Z,1520495820.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T07:57:00.933Z,1520495820.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:01.329Z,1520495821.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T07:57:01.330Z,1520495821.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:01.739Z,1520495821.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T07:57:01.740Z,1520495821.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:02.136Z,1520495822.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:02.531Z,1520495822.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:02.929Z,1520495822.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:03.330Z,1520495823.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:03.731Z,1520495823.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:04.128Z,1520495824.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:04.527Z,1520495824.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:04.932Z,1520495824.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:05.339Z,1520495825.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:05.737Z,1520495825.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:06.125Z,1520495826.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:06.535Z,1520495826.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:06.932Z,1520495826.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:07.335Z,1520495827.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:07.735Z,1520495827.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:08.137Z,1520495828.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:08.278Z,1520495828.278 [CommandLine](IMPORTANT): got command ibit
2018-03-08T07:57:08.537Z,1520495828.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:08.547Z,1520495828.547 [IBIT](IMPORTANT): Beginning Initiated BIT
2018-03-08T07:57:08.547Z,1520495828.547 [IBIT](IMPORTANT): Beginning control surface checks.
2018-03-08T07:57:08.567Z,1520495828.567 [CBIT](IMPORTANT): Beginning ground fault scan
2018-03-08T07:57:08.935Z,1520495828.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:09.346Z,1520495829.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:09.715Z,1520495829.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:10.146Z,1520495830.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:10.521Z,1520495830.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:10.944Z,1520495830.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:11.348Z,1520495831.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:11.742Z,1520495831.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:12.121Z,1520495832.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:12.543Z,1520495832.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:12.943Z,1520495832.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:13.343Z,1520495833.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:13.741Z,1520495833.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:14.141Z,1520495834.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:14.550Z,1520495834.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:14.943Z,1520495834.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:15.319Z,1520495835.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:15.719Z,1520495835.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:16.128Z,1520495836.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:16.526Z,1520495836.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:16.931Z,1520495836.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:17.349Z,1520495837.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:17.753Z,1520495837.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:20.818Z,1520495840.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:20.978Z,1520495840.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:21.019Z,1520495841.019 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.126272
CHAN A1 (24V): -0.011813
CHAN A2 (12V): 0.000666
CHAN A3 (5V): -0.001291
CHAN B0 (3.3V): 0.000699
CHAN B1 (3.15aV): -0.000299
CHAN B2 (3.15bV): -0.000251
CHAN B3 (GND): -0.000294
OPEN: 0.005289
Full Scale Calc: 4.765 mA, -1.589 mA
2018-03-08T07:57:21.488Z,1520495841.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:21.786Z,1520495841.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:22.195Z,1520495842.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:22.575Z,1520495842.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:22.965Z,1520495842.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:23.368Z,1520495843.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:23.797Z,1520495843.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:24.172Z,1520495844.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:24.587Z,1520495844.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:24.971Z,1520495844.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:25.379Z,1520495845.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:25.769Z,1520495845.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:26.169Z,1520495846.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:26.587Z,1520495846.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:27.005Z,1520495847.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:27.387Z,1520495847.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:27.770Z,1520495847.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:28.174Z,1520495848.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:28.581Z,1520495848.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:28.986Z,1520495848.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:29.383Z,1520495849.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:29.779Z,1520495849.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:30.171Z,1520495850.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:30.571Z,1520495850.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:30.973Z,1520495850.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:31.371Z,1520495851.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:31.781Z,1520495851.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:32.186Z,1520495852.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:32.580Z,1520495852.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:32.974Z,1520495852.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:33.369Z,1520495853.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:33.774Z,1520495853.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:34.168Z,1520495854.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:34.580Z,1520495854.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:34.980Z,1520495854.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:35.380Z,1520495855.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:35.766Z,1520495855.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:36.168Z,1520495856.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:36.574Z,1520495856.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:36.973Z,1520495856.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:37.371Z,1520495857.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:37.780Z,1520495857.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:38.179Z,1520495858.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:38.580Z,1520495858.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:38.970Z,1520495858.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:39.371Z,1520495859.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:39.770Z,1520495859.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:40.174Z,1520495860.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:40.593Z,1520495860.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:40.985Z,1520495860.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:41.381Z,1520495861.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:41.778Z,1520495861.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:42.176Z,1520495862.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:42.573Z,1520495862.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:42.973Z,1520495862.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:43.372Z,1520495863.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:43.779Z,1520495863.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:44.185Z,1520495864.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:44.582Z,1520495864.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:44.973Z,1520495864.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:45.391Z,1520495865.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:45.777Z,1520495865.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:46.171Z,1520495866.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:46.559Z,1520495866.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:46.982Z,1520495866.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:47.394Z,1520495867.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:47.790Z,1520495867.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:48.162Z,1520495868.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:48.566Z,1520495868.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:48.967Z,1520495868.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:49.371Z,1520495869.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:49.772Z,1520495869.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:50.188Z,1520495870.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:50.572Z,1520495870.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:50.965Z,1520495870.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:51.369Z,1520495871.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:51.769Z,1520495871.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:52.171Z,1520495872.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:52.565Z,1520495872.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:52.986Z,1520495872.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:53.394Z,1520495873.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:53.793Z,1520495873.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:54.166Z,1520495874.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:54.569Z,1520495874.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:54.970Z,1520495874.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:55.363Z,1520495875.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:55.799Z,1520495875.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:56.173Z,1520495876.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:56.597Z,1520495876.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:56.973Z,1520495876.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:57.373Z,1520495877.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:57.772Z,1520495877.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:58.173Z,1520495878.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:58.568Z,1520495878.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:58.974Z,1520495878.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:59.400Z,1520495879.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:57:59.773Z,1520495879.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:00.170Z,1520495880.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:00.570Z,1520495880.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:00.960Z,1520495880.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:01.362Z,1520495881.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:01.786Z,1520495881.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:02.182Z,1520495882.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:02.585Z,1520495882.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:02.978Z,1520495882.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:03.381Z,1520495883.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:03.778Z,1520495883.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:04.177Z,1520495884.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:04.578Z,1520495884.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:04.981Z,1520495884.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:05.381Z,1520495885.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:05.782Z,1520495885.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:06.178Z,1520495886.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:06.578Z,1520495886.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:06.979Z,1520495886.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:07.356Z,1520495887.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:07.786Z,1520495887.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:08.183Z,1520495888.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:08.583Z,1520495888.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:08.978Z,1520495888.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:09.358Z,1520495889.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:09.762Z,1520495889.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:10.183Z,1520495890.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:10.587Z,1520495890.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:10.980Z,1520495890.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:11.390Z,1520495891.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:11.788Z,1520495891.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:12.183Z,1520495892.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:12.566Z,1520495892.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:12.967Z,1520495892.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:13.367Z,1520495893.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:13.788Z,1520495893.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:14.189Z,1520495894.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:14.584Z,1520495894.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:14.966Z,1520495894.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:15.366Z,1520495895.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:15.763Z,1520495895.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:16.167Z,1520495896.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:16.558Z,1520495896.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:16.988Z,1520495896.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:17.385Z,1520495897.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:17.788Z,1520495897.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:20.907Z,1520495900.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:21.042Z,1520495901.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:21.412Z,1520495901.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:21.797Z,1520495901.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:22.195Z,1520495902.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:22.591Z,1520495902.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:22.999Z,1520495902.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:23.389Z,1520495903.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:23.793Z,1520495903.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:24.197Z,1520495904.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:24.593Z,1520495904.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:24.990Z,1520495904.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:25.390Z,1520495905.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:25.789Z,1520495905.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:26.213Z,1520495906.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:26.597Z,1520495906.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:26.997Z,1520495906.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:27.392Z,1520495907.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:27.791Z,1520495907.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:28.188Z,1520495908.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:28.590Z,1520495908.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:28.997Z,1520495908.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:29.392Z,1520495909.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:29.794Z,1520495909.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:29.998Z,1520495909.998 [CommandLine](IMPORTANT): got command failComponent
2018-03-08T07:58:29.998Z,1520495909.998 [CommandLine](IMPORTANT): Failed components:
2018-03-08T07:58:29.998Z,1520495909.998 [CommandLine](IMPORTANT): No failed Components.
2018-03-08T07:58:30.198Z,1520495910.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:30.590Z,1520495910.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:30.993Z,1520495910.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:31.398Z,1520495911.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:31.794Z,1520495911.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:32.196Z,1520495912.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:32.597Z,1520495912.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:32.991Z,1520495912.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:33.393Z,1520495913.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:33.570Z,1520495913.570 [CommandLine](IMPORTANT): got command failComponent
2018-03-08T07:58:33.570Z,1520495913.570 [CommandLine](IMPORTANT): Failed components:
2018-03-08T07:58:33.570Z,1520495913.570 [CommandLine](IMPORTANT): No failed Components.
2018-03-08T07:58:33.794Z,1520495913.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:34.192Z,1520495914.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:34.611Z,1520495914.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:35.012Z,1520495915.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:35.402Z,1520495915.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:35.835Z,1520495915.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:36.191Z,1520495916.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:36.626Z,1520495916.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:37.014Z,1520495917.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:37.404Z,1520495917.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:37.701Z,1520495917.701 [CommandLine](IMPORTANT): got command get Onboard.Pressure pound_per_square_inch
2018-03-08T07:58:37.702Z,1520495917.702 [CommandLine](IMPORTANT): Onboard.Pressure 9.270081 psi
2018-03-08T07:58:37.826Z,1520495917.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:38.208Z,1520495918.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:38.607Z,1520495918.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:39.011Z,1520495919.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:39.426Z,1520495919.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:39.819Z,1520495919.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:40.192Z,1520495920.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:40.614Z,1520495920.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:40.996Z,1520495920.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:41.401Z,1520495921.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:41.796Z,1520495921.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:42.187Z,1520495922.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:42.596Z,1520495922.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:43.011Z,1520495923.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:43.400Z,1520495923.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:43.634Z,1520495923.634 [CommandLine](IMPORTANT): got command get Onboard.Humidity
2018-03-08T07:58:43.635Z,1520495923.635 [CommandLine](IMPORTANT): Onboard.Humidity 2.228055 %
2018-03-08T07:58:43.801Z,1520495923.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:44.201Z,1520495924.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:44.601Z,1520495924.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:44.986Z,1520495924.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:45.397Z,1520495925.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:45.801Z,1520495925.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:46.197Z,1520495926.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:46.602Z,1520495926.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:47.002Z,1520495927.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:47.409Z,1520495927.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:47.809Z,1520495927.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:48.197Z,1520495928.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:48.599Z,1520495928.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:48.983Z,1520495928.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:49.407Z,1520495929.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:49.801Z,1520495929.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:50.207Z,1520495930.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:50.614Z,1520495930.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:51.003Z,1520495931.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:51.402Z,1520495931.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:51.779Z,1520495931.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:52.183Z,1520495932.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:52.587Z,1520495932.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:53.010Z,1520495933.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:53.405Z,1520495933.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:53.807Z,1520495933.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:54.178Z,1520495934.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:54.580Z,1520495934.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:54.987Z,1520495934.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:55.385Z,1520495935.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:55.804Z,1520495935.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:56.205Z,1520495936.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:56.606Z,1520495936.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:56.979Z,1520495936.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:57.406Z,1520495937.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:57.786Z,1520495937.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:58.185Z,1520495938.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:58.590Z,1520495938.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:59.010Z,1520495939.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:59.392Z,1520495939.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:59.425Z,1520495939.425 [IBIT](FAULT): Error acquiring IBIT communications status. Timeout expired.
2018-03-08T07:58:59.817Z,1520495939.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:58:59.835Z,1520495939.835 [IBIT](IMPORTANT): Battery Status:
Battery Charge (AH): 0.000000
Voltage: 0.000000
2018-03-08T07:58:59.835Z,1520495939.835 [IBIT](IMPORTANT): batteryCapacityThreshold: 5.000000 Ah
2018-03-08T07:58:59.835Z,1520495939.835 [IBIT](IMPORTANT): batteryVoltageThreshold: 13.500000 V
2018-03-08T07:59:00.191Z,1520495940.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:00.200Z,1520495940.200 [IBIT](IMPORTANT): bitHumidityThreshold: 55.000000 %
2018-03-08T07:59:00.200Z,1520495940.200 [IBIT](IMPORTANT): bitPressureThreshold: 0.750000 psi
2018-03-08T07:59:00.200Z,1520495940.200 [IBIT](IMPORTANT): Pressure:9.270081 PSI
2018-03-08T07:59:00.201Z,1520495940.201 [IBIT](IMPORTANT): Humidity:2.197534 %
2018-03-08T07:59:00.613Z,1520495940.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:00.638Z,1520495940.638 [IBIT](IMPORTANT): surfaceThreshold: 1.000000 m
2018-03-08T07:59:00.638Z,1520495940.638 [IBIT](IMPORTANT): buoyancyNeutral: 220.000000 cc
2018-03-08T07:59:00.639Z,1520495940.639 [IBIT](IMPORTANT): massDefault: -1.300000 cm
2018-03-08T07:59:00.639Z,1520495940.639 [IBIT](IMPORTANT): stopDepth: 112.000000 m
2018-03-08T07:59:00.639Z,1520495940.639 [IBIT](IMPORTANT): abortDepth: 130.000000 m
2018-03-08T07:59:00.639Z,1520495940.639 [IBIT](IMPORTANT): IBIT FAILED
2018-03-08T07:59:01.002Z,1520495941.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:01.405Z,1520495941.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:01.807Z,1520495941.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:02.204Z,1520495942.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:02.597Z,1520495942.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:02.990Z,1520495942.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:03.393Z,1520495943.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:03.792Z,1520495943.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:04.191Z,1520495944.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:04.596Z,1520495944.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:04.995Z,1520495944.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:05.396Z,1520495945.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:05.790Z,1520495945.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:06.187Z,1520495946.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:06.591Z,1520495946.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:06.992Z,1520495946.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:07.388Z,1520495947.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:07.795Z,1520495947.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:08.196Z,1520495948.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:08.595Z,1520495948.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:08.990Z,1520495948.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:09.394Z,1520495949.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:09.787Z,1520495949.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:10.193Z,1520495950.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:10.591Z,1520495950.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:10.997Z,1520495950.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:11.401Z,1520495951.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:11.797Z,1520495951.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:12.194Z,1520495952.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:12.590Z,1520495952.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:12.994Z,1520495952.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:13.392Z,1520495953.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:13.797Z,1520495953.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:14.202Z,1520495954.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:14.602Z,1520495954.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:14.986Z,1520495954.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:15.395Z,1520495955.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:15.792Z,1520495955.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:16.188Z,1520495956.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:16.594Z,1520495956.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:17.001Z,1520495957.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:17.400Z,1520495957.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:17.807Z,1520495957.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:20.898Z,1520495960.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:21.030Z,1520495961.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:21.423Z,1520495961.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:21.828Z,1520495961.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:22.226Z,1520495962.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:22.607Z,1520495962.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:23.004Z,1520495963.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:23.399Z,1520495963.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:23.831Z,1520495963.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:24.211Z,1520495964.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:24.605Z,1520495964.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:25.001Z,1520495965.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:25.398Z,1520495965.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:25.806Z,1520495965.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:26.203Z,1520495966.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:26.608Z,1520495966.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:27.004Z,1520495967.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:27.416Z,1520495967.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:27.806Z,1520495967.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:28.210Z,1520495968.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:28.605Z,1520495968.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:29.007Z,1520495969.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:29.406Z,1520495969.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:29.812Z,1520495969.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:30.207Z,1520495970.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:30.613Z,1520495970.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:31.010Z,1520495971.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:31.406Z,1520495971.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:31.807Z,1520495971.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:32.206Z,1520495972.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:32.614Z,1520495972.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:33.008Z,1520495973.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:33.407Z,1520495973.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:33.807Z,1520495973.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:34.201Z,1520495974.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:34.615Z,1520495974.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:35.011Z,1520495975.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:35.413Z,1520495975.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:35.843Z,1520495975.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:36.210Z,1520495976.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:36.647Z,1520495976.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:37.004Z,1520495977.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:37.409Z,1520495977.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:37.813Z,1520495977.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:38.217Z,1520495978.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:38.616Z,1520495978.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:39.011Z,1520495979.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:39.413Z,1520495979.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:39.818Z,1520495979.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:40.204Z,1520495980.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:40.614Z,1520495980.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:41.019Z,1520495981.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:41.422Z,1520495981.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:41.795Z,1520495981.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:42.225Z,1520495982.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:42.595Z,1520495982.595 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:42.595Z,1520495982.595 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6
2018-03-08T07:59:42.595Z,1520495982.595 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T07:59:42.597Z,1520495982.597 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:42.597Z,1520495982.597 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-03-08T07:59:42.598Z,1520495982.598 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T07:59:42.599Z,1520495982.599 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:42.599Z,1520495982.599 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-03-08T07:59:42.599Z,1520495982.599 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T07:59:42.627Z,1520495982.627 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T07:59:42.628Z,1520495982.628 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T07:59:42.628Z,1520495982.628 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T07:59:43.027Z,1520495983.027 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T07:59:43.027Z,1520495983.027 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6
2018-03-08T07:59:43.028Z,1520495983.028 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T07:59:43.028Z,1520495983.028 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-03-08T07:59:43.033Z,1520495983.033 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T07:59:43.033Z,1520495983.033 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-03-08T07:59:43.402Z,1520495983.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T07:59:43.402Z,1520495983.402 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T07:59:43.403Z,1520495983.403 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T07:59:43.403Z,1520495983.403 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T07:59:43.403Z,1520495983.403 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T07:59:43.404Z,1520495983.404 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T07:59:43.404Z,1520495983.404 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T07:59:43.404Z,1520495983.404 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T07:59:43.405Z,1520495983.405 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T07:59:43.807Z,1520495983.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T07:59:43.807Z,1520495983.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:44.212Z,1520495984.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T07:59:44.213Z,1520495984.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:44.611Z,1520495984.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T07:59:44.612Z,1520495984.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:44.998Z,1520495984.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T07:59:44.999Z,1520495984.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:45.409Z,1520495985.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T07:59:45.410Z,1520495985.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:45.808Z,1520495985.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T07:59:45.809Z,1520495985.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:46.208Z,1520495986.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T07:59:46.209Z,1520495986.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:46.612Z,1520495986.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T07:59:46.613Z,1520495986.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:47.018Z,1520495987.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T07:59:47.019Z,1520495987.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:47.415Z,1520495987.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T07:59:47.416Z,1520495987.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:47.810Z,1520495987.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T07:59:47.811Z,1520495987.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:48.204Z,1520495988.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T07:59:48.205Z,1520495988.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:48.606Z,1520495988.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T07:59:48.607Z,1520495988.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:49.005Z,1520495989.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T07:59:49.006Z,1520495989.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:49.406Z,1520495989.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T07:59:49.407Z,1520495989.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:49.822Z,1520495989.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T07:59:49.823Z,1520495989.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:50.226Z,1520495990.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T07:59:50.227Z,1520495990.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:50.626Z,1520495990.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T07:59:50.627Z,1520495990.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:51.007Z,1520495991.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T07:59:51.008Z,1520495991.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:51.414Z,1520495991.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T07:59:51.415Z,1520495991.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:51.813Z,1520495991.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T07:59:51.814Z,1520495991.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:52.214Z,1520495992.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T07:59:52.215Z,1520495992.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:52.618Z,1520495992.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T07:59:52.619Z,1520495992.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:53.020Z,1520495993.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T07:59:53.021Z,1520495993.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:53.419Z,1520495993.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T07:59:53.419Z,1520495993.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:53.810Z,1520495993.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T07:59:53.811Z,1520495993.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:54.202Z,1520495994.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T07:59:54.203Z,1520495994.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:54.614Z,1520495994.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T07:59:54.615Z,1520495994.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:55.008Z,1520495995.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T07:59:55.009Z,1520495995.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:55.405Z,1520495995.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T07:59:55.406Z,1520495995.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:55.817Z,1520495995.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T07:59:55.818Z,1520495995.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:56.220Z,1520495996.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T07:59:56.221Z,1520495996.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:56.619Z,1520495996.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T07:59:56.619Z,1520495996.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:57.005Z,1520495997.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T07:59:57.006Z,1520495997.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:57.409Z,1520495997.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T07:59:57.410Z,1520495997.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:57.804Z,1520495997.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T07:59:57.805Z,1520495997.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:58.219Z,1520495998.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T07:59:58.220Z,1520495998.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:58.611Z,1520495998.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T07:59:58.612Z,1520495998.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:59.025Z,1520495999.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T07:59:59.026Z,1520495999.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:59.411Z,1520495999.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T07:59:59.412Z,1520495999.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T07:59:59.821Z,1520495999.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T07:59:59.822Z,1520495999.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:00.208Z,1520496000.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T08:00:00.209Z,1520496000.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:00.607Z,1520496000.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T08:00:00.609Z,1520496000.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:01.005Z,1520496001.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T08:00:01.006Z,1520496001.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:01.414Z,1520496001.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T08:00:01.415Z,1520496001.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:01.816Z,1520496001.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T08:00:01.817Z,1520496001.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:02.216Z,1520496002.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T08:00:02.217Z,1520496002.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:02.615Z,1520496002.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:03.013Z,1520496003.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:03.418Z,1520496003.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:03.816Z,1520496003.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:04.196Z,1520496004.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:04.618Z,1520496004.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:05.021Z,1520496005.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:05.423Z,1520496005.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:05.820Z,1520496005.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:06.199Z,1520496006.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:06.595Z,1520496006.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:07.003Z,1520496007.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:07.401Z,1520496007.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:07.825Z,1520496007.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:08.230Z,1520496008.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:08.610Z,1520496008.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:08.997Z,1520496008.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:09.403Z,1520496009.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:09.804Z,1520496009.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:10.202Z,1520496010.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:10.609Z,1520496010.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:11.004Z,1520496011.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:11.401Z,1520496011.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:11.804Z,1520496011.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:12.199Z,1520496012.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:12.599Z,1520496012.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:13.010Z,1520496013.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:13.403Z,1520496013.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:13.830Z,1520496013.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:14.230Z,1520496014.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:14.608Z,1520496014.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:14.996Z,1520496014.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:15.403Z,1520496015.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:15.810Z,1520496015.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:16.196Z,1520496016.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:16.630Z,1520496016.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:17.025Z,1520496017.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:17.411Z,1520496017.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:17.811Z,1520496017.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:20.899Z,1520496020.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:21.038Z,1520496021.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:21.389Z,1520496021.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:21.795Z,1520496021.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:22.189Z,1520496022.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:22.571Z,1520496022.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:22.969Z,1520496022.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:23.369Z,1520496023.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:23.791Z,1520496023.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:24.192Z,1520496024.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:24.601Z,1520496024.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:24.978Z,1520496024.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:25.376Z,1520496025.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:25.773Z,1520496025.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:26.179Z,1520496026.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:26.601Z,1520496026.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:26.980Z,1520496026.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:27.378Z,1520496027.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:27.780Z,1520496027.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:28.177Z,1520496028.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:28.578Z,1520496028.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:28.990Z,1520496028.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:29.384Z,1520496029.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:29.795Z,1520496029.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:30.178Z,1520496030.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:30.575Z,1520496030.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:30.979Z,1520496030.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:31.372Z,1520496031.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:31.779Z,1520496031.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:32.184Z,1520496032.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:32.590Z,1520496032.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:32.977Z,1520496032.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:33.377Z,1520496033.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:33.777Z,1520496033.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:34.177Z,1520496034.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:34.572Z,1520496034.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:34.985Z,1520496034.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:35.388Z,1520496035.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:35.781Z,1520496035.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:36.178Z,1520496036.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:36.571Z,1520496036.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:36.973Z,1520496036.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:37.374Z,1520496037.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:37.781Z,1520496037.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:38.176Z,1520496038.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:38.603Z,1520496038.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:38.975Z,1520496038.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:39.378Z,1520496039.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:39.776Z,1520496039.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:40.179Z,1520496040.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:40.580Z,1520496040.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:40.979Z,1520496040.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:41.380Z,1520496041.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:41.771Z,1520496041.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:42.170Z,1520496042.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:42.575Z,1520496042.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:42.983Z,1520496042.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:43.375Z,1520496043.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:43.781Z,1520496043.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:44.180Z,1520496044.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:44.580Z,1520496044.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:44.975Z,1520496044.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:45.375Z,1520496045.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:45.779Z,1520496045.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:46.174Z,1520496046.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:46.575Z,1520496046.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:46.980Z,1520496046.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:47.380Z,1520496047.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:47.779Z,1520496047.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:48.171Z,1520496048.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:48.583Z,1520496048.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:48.982Z,1520496048.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:49.375Z,1520496049.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:49.791Z,1520496049.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:50.190Z,1520496050.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:50.584Z,1520496050.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:50.975Z,1520496050.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:51.375Z,1520496051.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:51.774Z,1520496051.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:52.177Z,1520496052.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:52.572Z,1520496052.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:52.981Z,1520496052.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:53.384Z,1520496053.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:53.780Z,1520496053.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:54.181Z,1520496054.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:54.575Z,1520496054.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:54.978Z,1520496054.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:55.376Z,1520496055.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:55.787Z,1520496055.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:56.188Z,1520496056.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:56.594Z,1520496056.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:56.973Z,1520496056.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:57.372Z,1520496057.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:57.782Z,1520496057.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:58.186Z,1520496058.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:58.574Z,1520496058.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:58.994Z,1520496058.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:59.389Z,1520496059.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:00:59.790Z,1520496059.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:00.185Z,1520496060.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:00.582Z,1520496060.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:00.986Z,1520496060.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:01.382Z,1520496061.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:01.785Z,1520496061.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:02.188Z,1520496062.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:02.590Z,1520496062.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:02.981Z,1520496062.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:03.374Z,1520496063.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:03.791Z,1520496063.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:04.162Z,1520496064.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:04.586Z,1520496064.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:04.995Z,1520496064.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:05.390Z,1520496065.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:05.788Z,1520496065.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:06.167Z,1520496066.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:06.569Z,1520496066.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:06.993Z,1520496066.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:07.371Z,1520496067.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:07.798Z,1520496067.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:08.196Z,1520496068.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:08.601Z,1520496068.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:08.966Z,1520496068.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:09.370Z,1520496069.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:09.772Z,1520496069.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:10.167Z,1520496070.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:10.570Z,1520496070.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:10.979Z,1520496070.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:11.384Z,1520496071.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:11.781Z,1520496071.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:12.174Z,1520496072.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:12.575Z,1520496072.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:12.973Z,1520496072.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:13.375Z,1520496073.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:13.775Z,1520496073.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:14.180Z,1520496074.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:14.577Z,1520496074.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:14.968Z,1520496074.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:15.371Z,1520496075.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:15.771Z,1520496075.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:16.171Z,1520496076.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:16.575Z,1520496076.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:16.980Z,1520496076.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:17.380Z,1520496077.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:17.383Z,1520496077.383 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T08:01:17.383Z,1520496077.383 [Default:CheckIn:C.Wait] Stopped
2018-03-08T08:01:17.383Z,1520496077.383 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T08:01:17.383Z,1520496077.383 [Default:CheckIn:D] Running Loop=1
2018-03-08T08:01:17.779Z,1520496077.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:17.784Z,1520496077.784 [Default:CheckIn:D] Stopped
2018-03-08T08:01:17.784Z,1520496077.784 [Default:CheckIn:E] Running Loop=1
2018-03-08T08:01:18.171Z,1520496078.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:18.174Z,1520496078.174 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 15.549620 min 
2018-03-08T08:01:18.176Z,1520496078.176 [Default:CheckIn:E] Stopped
2018-03-08T08:01:18.176Z,1520496078.176 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T08:01:18.176Z,1520496078.176 [Default:CheckIn] Stopped
2018-03-08T08:01:18.177Z,1520496078.177 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T08:01:18.177Z,1520496078.177 [Default:CheckIn](INFO): Running loop #2
2018-03-08T08:01:18.177Z,1520496078.177 [Default:CheckIn] Running Loop=2
2018-03-08T08:01:18.177Z,1520496078.177 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T08:01:18.177Z,1520496078.177 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T08:01:21.266Z,1520496081.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:21.412Z,1520496081.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:21.753Z,1520496081.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:22.163Z,1520496082.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:22.568Z,1520496082.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:22.936Z,1520496082.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:23.339Z,1520496083.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:23.737Z,1520496083.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:24.140Z,1520496084.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:24.567Z,1520496084.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:24.964Z,1520496084.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:25.366Z,1520496085.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:25.754Z,1520496085.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:26.136Z,1520496086.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:26.537Z,1520496086.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:26.936Z,1520496086.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:27.338Z,1520496087.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:27.766Z,1520496087.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:28.139Z,1520496088.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:28.566Z,1520496088.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:28.936Z,1520496088.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:29.339Z,1520496089.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:29.738Z,1520496089.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:30.139Z,1520496090.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:30.568Z,1520496090.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:30.967Z,1520496090.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:31.366Z,1520496091.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:31.739Z,1520496091.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:32.135Z,1520496092.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:32.535Z,1520496092.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:32.940Z,1520496092.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:33.335Z,1520496093.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:33.766Z,1520496093.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:34.160Z,1520496094.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:34.565Z,1520496094.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:34.940Z,1520496094.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:35.335Z,1520496095.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:35.742Z,1520496095.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:36.139Z,1520496096.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:36.551Z,1520496096.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:36.945Z,1520496096.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:36.974Z,1520496096.974 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T08:01:37.345Z,1520496097.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:37.744Z,1520496097.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:38.142Z,1520496098.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:38.544Z,1520496098.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:38.945Z,1520496098.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:39.341Z,1520496099.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:39.745Z,1520496099.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:40.148Z,1520496100.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:40.555Z,1520496100.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:40.943Z,1520496100.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:41.342Z,1520496101.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:41.745Z,1520496101.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:42.145Z,1520496102.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:42.550Z,1520496102.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:42.947Z,1520496102.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:43.354Z,1520496103.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:43.745Z,1520496103.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:44.139Z,1520496104.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:44.540Z,1520496104.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:44.950Z,1520496104.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:45.344Z,1520496105.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:45.748Z,1520496105.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:46.148Z,1520496106.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:46.544Z,1520496106.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:46.946Z,1520496106.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:47.346Z,1520496107.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:47.750Z,1520496107.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:48.146Z,1520496108.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:48.576Z,1520496108.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:48.947Z,1520496108.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:49.347Z,1520496109.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:49.743Z,1520496109.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:50.140Z,1520496110.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:50.543Z,1520496110.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:50.945Z,1520496110.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:51.346Z,1520496111.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:51.752Z,1520496111.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:52.152Z,1520496112.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:52.553Z,1520496112.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:52.943Z,1520496112.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:53.346Z,1520496113.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:53.745Z,1520496113.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:54.147Z,1520496114.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:54.549Z,1520496114.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:54.954Z,1520496114.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:55.352Z,1520496115.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:55.741Z,1520496115.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:56.137Z,1520496116.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:56.546Z,1520496116.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:56.950Z,1520496116.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:57.339Z,1520496117.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:57.777Z,1520496117.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:58.150Z,1520496118.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:58.543Z,1520496118.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:58.942Z,1520496118.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:59.336Z,1520496119.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:01:59.744Z,1520496119.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:00.142Z,1520496120.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:00.545Z,1520496120.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:00.944Z,1520496120.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:01.355Z,1520496121.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:01.735Z,1520496121.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:02.147Z,1520496122.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:02.546Z,1520496122.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:02.937Z,1520496122.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:03.347Z,1520496123.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:03.771Z,1520496123.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:04.148Z,1520496124.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:04.544Z,1520496124.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:04.946Z,1520496124.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:05.343Z,1520496125.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:05.746Z,1520496125.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:06.139Z,1520496126.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:06.549Z,1520496126.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:06.950Z,1520496126.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:07.347Z,1520496127.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:07.743Z,1520496127.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:08.140Z,1520496128.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:08.550Z,1520496128.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:08.944Z,1520496128.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:09.336Z,1520496129.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:09.748Z,1520496129.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:10.148Z,1520496130.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:10.549Z,1520496130.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:10.942Z,1520496130.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:11.343Z,1520496131.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:11.745Z,1520496131.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:12.146Z,1520496132.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:12.549Z,1520496132.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:12.950Z,1520496132.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:13.349Z,1520496133.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:13.743Z,1520496133.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:14.138Z,1520496134.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:14.539Z,1520496134.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:14.945Z,1520496134.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:15.350Z,1520496135.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:15.749Z,1520496135.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:16.149Z,1520496136.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:16.549Z,1520496136.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:16.946Z,1520496136.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:17.344Z,1520496137.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:17.750Z,1520496137.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:18.150Z,1520496138.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:18.553Z,1520496138.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:21.646Z,1520496141.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:21.806Z,1520496141.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:22.137Z,1520496142.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:22.531Z,1520496142.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:22.944Z,1520496142.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:23.342Z,1520496143.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:23.749Z,1520496143.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:24.137Z,1520496144.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:24.550Z,1520496144.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:24.936Z,1520496144.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:25.334Z,1520496145.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:25.735Z,1520496145.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:26.135Z,1520496146.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:26.534Z,1520496146.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:26.941Z,1520496146.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:27.341Z,1520496147.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:27.750Z,1520496147.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:28.139Z,1520496148.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:28.530Z,1520496148.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:28.939Z,1520496148.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:29.339Z,1520496149.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:29.747Z,1520496149.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:30.141Z,1520496150.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:30.550Z,1520496150.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:30.935Z,1520496150.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:31.334Z,1520496151.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:31.737Z,1520496151.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:32.135Z,1520496152.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:32.546Z,1520496152.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:32.947Z,1520496152.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:33.345Z,1520496153.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:33.739Z,1520496153.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:34.136Z,1520496154.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:34.545Z,1520496154.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:34.937Z,1520496154.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:35.354Z,1520496155.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:35.741Z,1520496155.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:36.129Z,1520496156.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:36.531Z,1520496156.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:36.935Z,1520496156.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:37.336Z,1520496157.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:37.741Z,1520496157.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:38.148Z,1520496158.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:38.538Z,1520496158.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:38.934Z,1520496158.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:39.329Z,1520496159.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:39.735Z,1520496159.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:40.143Z,1520496160.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:40.535Z,1520496160.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:40.947Z,1520496160.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:41.355Z,1520496161.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:41.745Z,1520496161.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:42.135Z,1520496162.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:42.539Z,1520496162.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:42.938Z,1520496162.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:43.327Z,1520496163.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:43.753Z,1520496163.753 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:43.753Z,1520496163.753 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7
2018-03-08T08:02:43.753Z,1520496163.753 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T08:02:43.755Z,1520496163.755 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:43.755Z,1520496163.755 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-03-08T08:02:43.755Z,1520496163.755 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T08:02:43.765Z,1520496163.765 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:43.765Z,1520496163.765 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-03-08T08:02:43.765Z,1520496163.765 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T08:02:43.798Z,1520496163.798 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T08:02:43.798Z,1520496163.798 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T08:02:43.798Z,1520496163.798 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T08:02:44.160Z,1520496164.160 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T08:02:44.161Z,1520496164.161 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7
2018-03-08T08:02:44.161Z,1520496164.161 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T08:02:44.161Z,1520496164.161 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-03-08T08:02:44.161Z,1520496164.161 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T08:02:44.162Z,1520496164.162 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-03-08T08:02:44.540Z,1520496164.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T08:02:44.540Z,1520496164.540 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:02:44.541Z,1520496164.541 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:02:44.541Z,1520496164.541 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T08:02:44.542Z,1520496164.542 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:02:44.542Z,1520496164.542 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:02:44.542Z,1520496164.542 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T08:02:44.543Z,1520496164.543 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:02:44.543Z,1520496164.543 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:02:44.950Z,1520496164.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T08:02:44.951Z,1520496164.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:45.345Z,1520496165.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T08:02:45.346Z,1520496165.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:45.759Z,1520496165.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T08:02:45.760Z,1520496165.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:46.140Z,1520496166.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T08:02:46.141Z,1520496166.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:46.534Z,1520496166.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T08:02:46.535Z,1520496166.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:46.950Z,1520496166.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T08:02:46.951Z,1520496166.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:47.354Z,1520496167.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T08:02:47.355Z,1520496167.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:47.746Z,1520496167.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T08:02:47.747Z,1520496167.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:48.122Z,1520496168.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T08:02:48.123Z,1520496168.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:48.526Z,1520496168.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T08:02:48.527Z,1520496168.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:48.928Z,1520496168.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T08:02:48.929Z,1520496168.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:49.322Z,1520496169.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T08:02:49.323Z,1520496169.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:49.747Z,1520496169.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T08:02:49.748Z,1520496169.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:50.149Z,1520496170.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T08:02:50.150Z,1520496170.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:50.554Z,1520496170.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T08:02:50.555Z,1520496170.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:50.923Z,1520496170.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T08:02:50.923Z,1520496170.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:51.324Z,1520496171.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T08:02:51.325Z,1520496171.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:51.728Z,1520496171.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T08:02:51.729Z,1520496171.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:52.132Z,1520496172.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T08:02:52.134Z,1520496172.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:52.525Z,1520496172.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T08:02:52.526Z,1520496172.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:52.928Z,1520496172.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T08:02:52.929Z,1520496172.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:53.357Z,1520496173.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T08:02:53.358Z,1520496173.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:53.759Z,1520496173.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T08:02:53.760Z,1520496173.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:54.127Z,1520496174.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T08:02:54.128Z,1520496174.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:54.527Z,1520496174.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T08:02:54.529Z,1520496174.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:54.928Z,1520496174.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T08:02:54.929Z,1520496174.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:55.328Z,1520496175.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T08:02:55.329Z,1520496175.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:55.758Z,1520496175.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T08:02:55.759Z,1520496175.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:56.160Z,1520496176.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T08:02:56.161Z,1520496176.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:56.529Z,1520496176.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T08:02:56.530Z,1520496176.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:56.928Z,1520496176.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T08:02:56.929Z,1520496176.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:57.331Z,1520496177.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T08:02:57.332Z,1520496177.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:57.729Z,1520496177.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T08:02:57.730Z,1520496177.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:58.130Z,1520496178.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T08:02:58.131Z,1520496178.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:58.537Z,1520496178.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T08:02:58.538Z,1520496178.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:58.931Z,1520496178.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T08:02:58.932Z,1520496178.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:59.340Z,1520496179.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T08:02:59.342Z,1520496179.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:02:59.747Z,1520496179.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T08:02:59.748Z,1520496179.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:00.130Z,1520496180.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T08:03:00.131Z,1520496180.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:00.535Z,1520496180.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T08:03:00.536Z,1520496180.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:00.938Z,1520496180.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T08:03:00.939Z,1520496180.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:01.339Z,1520496181.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T08:03:01.340Z,1520496181.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:01.740Z,1520496181.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T08:03:01.741Z,1520496181.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:02.139Z,1520496182.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T08:03:02.140Z,1520496182.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:02.536Z,1520496182.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T08:03:02.537Z,1520496182.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:02.929Z,1520496182.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T08:03:02.930Z,1520496182.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:03.334Z,1520496183.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T08:03:03.335Z,1520496183.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:03.734Z,1520496183.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T08:03:03.735Z,1520496183.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:04.136Z,1520496184.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:04.542Z,1520496184.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:04.941Z,1520496184.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:05.346Z,1520496185.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:05.745Z,1520496185.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:06.129Z,1520496186.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:06.538Z,1520496186.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:06.937Z,1520496186.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:07.335Z,1520496187.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:07.690Z,1520496187.690 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T08:03:07.690Z,1520496187.690 [NAL9602] Data Fault, FailCount= 3
2018-03-08T08:03:07.690Z,1520496187.690 [NAL9602](ERROR): Data Fault
2018-03-08T08:03:07.739Z,1520496187.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:07.773Z,1520496187.773 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T08:03:08.091Z,1520496188.091 [NAL9602](INFO): Powering down
2018-03-08T08:03:08.146Z,1520496188.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:08.523Z,1520496188.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:08.940Z,1520496188.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:08.953Z,1520496188.953 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T08:03:08.953Z,1520496188.953 [NAL9602] No Fault, FailCount= 3
2018-03-08T08:03:09.335Z,1520496189.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:09.735Z,1520496189.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:10.137Z,1520496190.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:10.536Z,1520496190.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:10.915Z,1520496190.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:11.344Z,1520496191.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:11.718Z,1520496191.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:12.119Z,1520496192.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:12.550Z,1520496192.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:12.922Z,1520496192.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:13.318Z,1520496193.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:13.726Z,1520496193.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:14.149Z,1520496194.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:14.518Z,1520496194.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:14.951Z,1520496194.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:15.322Z,1520496195.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:15.722Z,1520496195.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:16.125Z,1520496196.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:16.555Z,1520496196.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:16.922Z,1520496196.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:17.329Z,1520496197.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:17.723Z,1520496197.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:18.122Z,1520496198.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:18.526Z,1520496198.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:18.956Z,1520496198.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:22.017Z,1520496202.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:22.158Z,1520496202.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:22.503Z,1520496202.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:22.879Z,1520496202.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:23.283Z,1520496203.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:23.706Z,1520496203.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:24.081Z,1520496204.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:24.479Z,1520496204.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:24.910Z,1520496204.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:25.283Z,1520496205.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:25.684Z,1520496205.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:26.091Z,1520496206.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:26.482Z,1520496206.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:26.884Z,1520496206.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:27.290Z,1520496207.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:27.683Z,1520496207.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:28.085Z,1520496208.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:28.485Z,1520496208.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:28.890Z,1520496208.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:29.281Z,1520496209.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:29.684Z,1520496209.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:30.105Z,1520496210.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:30.481Z,1520496210.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:30.913Z,1520496210.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:31.287Z,1520496211.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:31.701Z,1520496211.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:32.095Z,1520496212.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:32.495Z,1520496212.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:32.889Z,1520496212.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:33.294Z,1520496213.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:33.691Z,1520496213.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:34.088Z,1520496214.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:34.494Z,1520496214.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:34.887Z,1520496214.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:35.289Z,1520496215.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:35.695Z,1520496215.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:36.090Z,1520496216.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:36.489Z,1520496216.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:36.887Z,1520496216.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:37.283Z,1520496217.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:37.689Z,1520496217.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:38.094Z,1520496218.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:38.450Z,1520496218.450 [NAL9602](INFO): Powering up NAL9602
2018-03-08T08:03:38.502Z,1520496218.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:38.884Z,1520496218.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:39.290Z,1520496219.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:39.691Z,1520496219.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:40.083Z,1520496220.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:40.490Z,1520496220.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:40.892Z,1520496220.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:41.291Z,1520496221.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:41.693Z,1520496221.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:42.093Z,1520496222.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:42.471Z,1520496222.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:42.898Z,1520496222.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:43.297Z,1520496223.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:43.676Z,1520496223.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:44.103Z,1520496224.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:44.478Z,1520496224.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:44.871Z,1520496224.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:45.303Z,1520496225.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:45.674Z,1520496225.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:46.071Z,1520496226.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:46.478Z,1520496226.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:46.904Z,1520496226.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:47.279Z,1520496227.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:47.681Z,1520496227.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:48.106Z,1520496228.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:48.473Z,1520496228.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:48.882Z,1520496228.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:49.306Z,1520496229.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:49.647Z,1520496229.647 [NAL9602](INFO): NAL9602 initialized
2018-03-08T08:03:49.679Z,1520496229.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:50.086Z,1520496230.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:50.514Z,1520496230.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:50.888Z,1520496230.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:51.312Z,1520496231.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:51.683Z,1520496231.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:52.083Z,1520496232.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:52.488Z,1520496232.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:52.887Z,1520496232.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:53.316Z,1520496233.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:53.716Z,1520496233.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:54.096Z,1520496234.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:54.483Z,1520496234.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:54.887Z,1520496234.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:55.315Z,1520496235.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:55.696Z,1520496235.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:56.100Z,1520496236.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:56.488Z,1520496236.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:56.883Z,1520496236.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:57.296Z,1520496237.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:57.697Z,1520496237.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:58.095Z,1520496238.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:58.491Z,1520496238.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:58.900Z,1520496238.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:59.335Z,1520496239.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:03:59.732Z,1520496239.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:00.102Z,1520496240.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:00.526Z,1520496240.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:00.915Z,1520496240.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:01.352Z,1520496241.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:01.710Z,1520496241.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:02.106Z,1520496242.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:02.479Z,1520496242.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:02.906Z,1520496242.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:03.314Z,1520496243.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:03.696Z,1520496243.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:04.117Z,1520496244.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:04.494Z,1520496244.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:04.887Z,1520496244.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:05.289Z,1520496245.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:05.698Z,1520496245.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:06.100Z,1520496246.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:06.491Z,1520496246.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:06.894Z,1520496246.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:07.316Z,1520496247.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:07.702Z,1520496247.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:08.106Z,1520496248.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:08.490Z,1520496248.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:08.904Z,1520496248.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:09.303Z,1520496249.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:09.700Z,1520496249.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:10.100Z,1520496250.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:10.545Z,1520496250.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:10.890Z,1520496250.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:11.301Z,1520496251.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:11.699Z,1520496251.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:12.100Z,1520496252.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:12.495Z,1520496252.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:12.898Z,1520496252.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:13.287Z,1520496253.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:13.756Z,1520496253.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:14.110Z,1520496254.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:14.496Z,1520496254.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:14.892Z,1520496254.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:15.297Z,1520496255.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:15.690Z,1520496255.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:16.089Z,1520496256.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:16.495Z,1520496256.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:16.901Z,1520496256.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:17.305Z,1520496257.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:17.700Z,1520496257.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:18.113Z,1520496258.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:18.491Z,1520496258.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:18.888Z,1520496258.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:19.296Z,1520496259.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:22.598Z,1520496262.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:22.739Z,1520496262.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:23.094Z,1520496263.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:23.511Z,1520496263.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:23.867Z,1520496263.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:24.268Z,1520496264.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:24.695Z,1520496264.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:25.094Z,1520496265.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:25.498Z,1520496265.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:25.872Z,1520496265.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:26.267Z,1520496266.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:26.745Z,1520496266.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:27.070Z,1520496267.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:27.500Z,1520496267.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:27.901Z,1520496267.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:28.297Z,1520496268.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:28.668Z,1520496268.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:29.098Z,1520496269.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:29.471Z,1520496269.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:29.934Z,1520496269.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:30.278Z,1520496270.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:30.686Z,1520496270.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:31.086Z,1520496271.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:31.480Z,1520496271.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:31.874Z,1520496271.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:32.271Z,1520496272.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:32.674Z,1520496272.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:33.140Z,1520496273.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:33.481Z,1520496273.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:33.884Z,1520496273.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:34.290Z,1520496274.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:34.675Z,1520496274.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:35.079Z,1520496275.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:35.483Z,1520496275.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:35.876Z,1520496275.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:36.299Z,1520496276.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:36.685Z,1520496276.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:37.082Z,1520496277.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:37.480Z,1520496277.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:37.873Z,1520496277.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:38.279Z,1520496278.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:38.681Z,1520496278.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:39.082Z,1520496279.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:39.520Z,1520496279.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:39.895Z,1520496279.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:40.287Z,1520496280.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:40.687Z,1520496280.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:41.082Z,1520496281.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:41.493Z,1520496281.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:41.868Z,1520496281.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:42.270Z,1520496282.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:42.695Z,1520496282.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:43.092Z,1520496283.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:43.488Z,1520496283.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:43.895Z,1520496283.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:44.267Z,1520496284.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:44.671Z,1520496284.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:45.074Z,1520496285.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:45.472Z,1520496285.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:45.899Z,1520496285.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:46.280Z,1520496286.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:46.667Z,1520496286.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:47.071Z,1520496287.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:47.467Z,1520496287.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:47.874Z,1520496287.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:48.269Z,1520496288.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:48.677Z,1520496288.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:49.072Z,1520496289.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:49.472Z,1520496289.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:49.873Z,1520496289.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:50.271Z,1520496290.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:50.674Z,1520496290.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:51.071Z,1520496291.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:51.475Z,1520496291.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:51.880Z,1520496291.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:52.276Z,1520496292.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:52.671Z,1520496292.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:53.069Z,1520496293.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:53.479Z,1520496293.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:53.878Z,1520496293.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:54.278Z,1520496294.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:54.681Z,1520496294.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:55.080Z,1520496295.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:55.476Z,1520496295.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:55.873Z,1520496295.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:56.273Z,1520496296.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:56.675Z,1520496296.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:57.071Z,1520496297.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:57.480Z,1520496297.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:58.028Z,1520496298.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:58.322Z,1520496298.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:58.675Z,1520496298.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:59.071Z,1520496299.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:59.487Z,1520496299.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:04:59.875Z,1520496299.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:00.279Z,1520496300.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:00.689Z,1520496300.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:01.081Z,1520496301.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:01.486Z,1520496301.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:01.921Z,1520496301.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:02.275Z,1520496302.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:02.679Z,1520496302.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:03.102Z,1520496303.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:03.493Z,1520496303.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:03.892Z,1520496303.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:04.288Z,1520496304.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:04.667Z,1520496304.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:05.067Z,1520496305.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:05.465Z,1520496305.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:05.871Z,1520496305.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:06.298Z,1520496306.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:06.692Z,1520496306.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:07.094Z,1520496307.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:07.490Z,1520496307.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:07.868Z,1520496307.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:08.275Z,1520496308.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:08.672Z,1520496308.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:09.070Z,1520496309.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:09.498Z,1520496309.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:09.880Z,1520496309.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:10.282Z,1520496310.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:10.671Z,1520496310.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:11.070Z,1520496311.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:11.470Z,1520496311.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:11.872Z,1520496311.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:12.268Z,1520496312.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:12.676Z,1520496312.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:13.082Z,1520496313.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:13.486Z,1520496313.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:13.875Z,1520496313.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:14.274Z,1520496314.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:14.671Z,1520496314.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:15.075Z,1520496315.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:15.486Z,1520496315.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:15.880Z,1520496315.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:16.279Z,1520496316.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:16.674Z,1520496316.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:17.078Z,1520496317.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:17.474Z,1520496317.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:17.873Z,1520496317.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:18.270Z,1520496318.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:18.680Z,1520496318.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:19.080Z,1520496319.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:19.479Z,1520496319.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:22.574Z,1520496322.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:22.714Z,1520496322.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:23.060Z,1520496323.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:23.530Z,1520496323.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:23.864Z,1520496323.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:24.266Z,1520496324.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:24.643Z,1520496324.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:25.062Z,1520496325.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:25.469Z,1520496325.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:25.852Z,1520496325.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:26.252Z,1520496326.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:26.650Z,1520496326.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:27.043Z,1520496327.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:27.450Z,1520496327.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:27.850Z,1520496327.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:28.243Z,1520496328.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:28.673Z,1520496328.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:29.052Z,1520496329.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:29.458Z,1520496329.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:29.843Z,1520496329.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:30.246Z,1520496330.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:30.643Z,1520496330.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:31.048Z,1520496331.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:31.451Z,1520496331.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:31.853Z,1520496331.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:32.252Z,1520496332.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:32.648Z,1520496332.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:33.049Z,1520496333.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:33.447Z,1520496333.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:33.848Z,1520496333.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:34.246Z,1520496334.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:34.649Z,1520496334.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:35.053Z,1520496335.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:35.452Z,1520496335.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:35.849Z,1520496335.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:36.247Z,1520496336.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:36.649Z,1520496336.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:37.048Z,1520496337.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:37.459Z,1520496337.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:37.857Z,1520496337.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:38.258Z,1520496338.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:38.645Z,1520496338.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:39.049Z,1520496339.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:39.456Z,1520496339.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:39.856Z,1520496339.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:40.256Z,1520496340.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:40.647Z,1520496340.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:41.046Z,1520496341.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:41.458Z,1520496341.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:41.866Z,1520496341.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:42.281Z,1520496342.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:42.675Z,1520496342.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:43.080Z,1520496343.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:43.486Z,1520496343.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:45.172Z,1520496345.172 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:45.172Z,1520496345.172 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8
2018-03-08T08:05:45.172Z,1520496345.172 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T08:05:45.174Z,1520496345.174 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:45.174Z,1520496345.174 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-03-08T08:05:45.174Z,1520496345.174 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T08:05:45.176Z,1520496345.176 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:45.176Z,1520496345.176 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-03-08T08:05:45.176Z,1520496345.176 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T08:05:45.188Z,1520496345.188 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T08:05:45.188Z,1520496345.188 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T08:05:45.205Z,1520496345.205 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T08:05:45.363Z,1520496345.363 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T08:05:45.363Z,1520496345.363 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8
2018-03-08T08:05:45.363Z,1520496345.363 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T08:05:45.363Z,1520496345.363 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-03-08T08:05:45.364Z,1520496345.364 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T08:05:45.364Z,1520496345.364 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-03-08T08:05:45.677Z,1520496345.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T08:05:45.678Z,1520496345.678 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:05:45.678Z,1520496345.678 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:05:45.679Z,1520496345.679 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T08:05:45.679Z,1520496345.679 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:05:45.679Z,1520496345.679 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:05:45.680Z,1520496345.680 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T08:05:45.680Z,1520496345.680 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:05:45.684Z,1520496345.684 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:05:46.094Z,1520496346.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-03-08T08:05:46.095Z,1520496346.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:46.480Z,1520496346.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-03-08T08:05:46.485Z,1520496346.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:46.889Z,1520496346.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-03-08T08:05:46.890Z,1520496346.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:47.258Z,1520496347.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-03-08T08:05:47.259Z,1520496347.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:47.662Z,1520496347.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-03-08T08:05:47.663Z,1520496347.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:48.066Z,1520496348.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-03-08T08:05:48.067Z,1520496348.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:48.470Z,1520496348.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-03-08T08:05:48.471Z,1520496348.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:48.876Z,1520496348.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-08T08:05:48.893Z,1520496348.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:49.268Z,1520496349.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-03-08T08:05:49.269Z,1520496349.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:49.665Z,1520496349.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-03-08T08:05:49.666Z,1520496349.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:50.068Z,1520496350.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-08T08:05:50.069Z,1520496350.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:50.463Z,1520496350.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-08T08:05:50.463Z,1520496350.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:50.872Z,1520496350.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T08:05:50.873Z,1520496350.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:51.265Z,1520496351.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T08:05:51.266Z,1520496351.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:51.672Z,1520496351.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-08T08:05:51.673Z,1520496351.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:52.079Z,1520496352.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-08T08:05:52.080Z,1520496352.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:52.470Z,1520496352.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-08T08:05:52.471Z,1520496352.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:52.865Z,1520496352.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-08T08:05:52.866Z,1520496352.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:53.273Z,1520496353.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-08T08:05:53.274Z,1520496353.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:53.670Z,1520496353.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-08T08:05:53.671Z,1520496353.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:54.068Z,1520496354.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-08T08:05:54.069Z,1520496354.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:54.476Z,1520496354.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-08T08:05:54.477Z,1520496354.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:54.879Z,1520496354.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-08T08:05:54.880Z,1520496354.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:55.273Z,1520496355.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T08:05:55.274Z,1520496355.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:55.664Z,1520496355.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-08T08:05:55.665Z,1520496355.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:56.069Z,1520496356.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T08:05:56.070Z,1520496356.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:56.470Z,1520496356.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T08:05:56.471Z,1520496356.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:56.867Z,1520496356.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T08:05:56.868Z,1520496356.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:57.270Z,1520496357.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T08:05:57.271Z,1520496357.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:57.672Z,1520496357.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T08:05:57.673Z,1520496357.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:58.086Z,1520496358.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-08T08:05:58.087Z,1520496358.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:58.469Z,1520496358.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-08T08:05:58.470Z,1520496358.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:58.875Z,1520496358.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-08T08:05:58.876Z,1520496358.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:59.267Z,1520496359.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-08T08:05:59.268Z,1520496359.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:05:59.666Z,1520496359.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-08T08:05:59.667Z,1520496359.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:00.064Z,1520496360.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T08:06:00.065Z,1520496360.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:00.482Z,1520496360.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-08T08:06:00.483Z,1520496360.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:00.879Z,1520496360.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T08:06:00.880Z,1520496360.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:01.275Z,1520496361.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T08:06:01.276Z,1520496361.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:01.667Z,1520496361.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T08:06:01.668Z,1520496361.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:02.063Z,1520496362.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T08:06:02.064Z,1520496362.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:02.469Z,1520496362.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-08T08:06:02.470Z,1520496362.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:02.866Z,1520496362.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T08:06:02.867Z,1520496362.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:03.270Z,1520496363.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-08T08:06:03.271Z,1520496363.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:03.676Z,1520496363.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-08T08:06:03.681Z,1520496363.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:04.081Z,1520496364.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T08:06:04.082Z,1520496364.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:04.473Z,1520496364.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T08:06:04.474Z,1520496364.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:04.873Z,1520496364.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T08:06:04.874Z,1520496364.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:05.267Z,1520496365.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:05.673Z,1520496365.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:06.073Z,1520496366.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:06.480Z,1520496366.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:06.879Z,1520496366.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:07.279Z,1520496367.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:07.678Z,1520496367.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:08.070Z,1520496368.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:08.474Z,1520496368.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:08.860Z,1520496368.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:09.262Z,1520496369.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:09.687Z,1520496369.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:10.085Z,1520496370.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:10.485Z,1520496370.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:10.861Z,1520496370.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:11.267Z,1520496371.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:11.668Z,1520496371.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:12.065Z,1520496372.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:12.484Z,1520496372.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:12.864Z,1520496372.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:13.283Z,1520496373.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:13.663Z,1520496373.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:14.059Z,1520496374.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:14.466Z,1520496374.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:14.866Z,1520496374.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:15.261Z,1520496375.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:15.686Z,1520496375.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:16.065Z,1520496376.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:16.486Z,1520496376.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:16.862Z,1520496376.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:17.265Z,1520496377.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:17.670Z,1520496377.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:18.064Z,1520496378.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:18.492Z,1520496378.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:18.495Z,1520496378.495 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T08:01:18.2Z
2018-03-08T08:06:18.495Z,1520496378.495 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T08:06:18.495Z,1520496378.495 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T08:06:18.885Z,1520496378.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:19.370Z,1520496379.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:19.661Z,1520496379.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:22.760Z,1520496382.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:22.891Z,1520496382.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:23.193Z,1520496383.193 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0008.lzma
2018-03-08T08:06:23.259Z,1520496383.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:23.651Z,1520496383.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:23.991Z,1520496383.991 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0008.lzma.bak
2018-03-08T08:06:23.991Z,1520496383.991 [DataOverHttps](INFO): SBD MOMSN=7983926
2018-03-08T08:06:24.095Z,1520496384.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:24.607Z,1520496384.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:24.830Z,1520496384.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:27.955Z,1520496387.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:28.078Z,1520496388.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:28.450Z,1520496388.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:28.827Z,1520496388.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:29.230Z,1520496389.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:29.627Z,1520496389.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:30.025Z,1520496390.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:33.130Z,1520496393.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:33.270Z,1520496393.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:33.578Z,1520496393.578 [DataOverHttps](INFO): Sending 872 bytes from file Logs/20180308T074127/Express0009.lzma
2018-03-08T08:06:33.658Z,1520496393.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:34.020Z,1520496394.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:34.375Z,1520496394.375 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0009.lzma.bak
2018-03-08T08:06:34.375Z,1520496394.375 [DataOverHttps](INFO): SBD MOMSN=7983928
2018-03-08T08:06:34.448Z,1520496394.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:34.982Z,1520496394.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:34.984Z,1520496394.984 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T08:06:34.985Z,1520496394.985 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T08:06:34.985Z,1520496394.985 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T08:06:35.225Z,1520496395.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:35.642Z,1520496395.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:38.727Z,1520496398.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:38.845Z,1520496398.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:39.219Z,1520496399.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:39.597Z,1520496399.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:39.998Z,1520496399.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:40.429Z,1520496400.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:40.842Z,1520496400.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:41.227Z,1520496401.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:41.603Z,1520496401.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:42.059Z,1520496402.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:42.393Z,1520496402.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:42.803Z,1520496402.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:43.203Z,1520496403.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:43.603Z,1520496403.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:44.008Z,1520496404.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:44.432Z,1520496404.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:44.803Z,1520496404.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:45.203Z,1520496405.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:45.721Z,1520496405.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:46.001Z,1520496406.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:46.401Z,1520496406.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:46.810Z,1520496406.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:47.210Z,1520496407.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:47.650Z,1520496407.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:48.002Z,1520496408.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:48.398Z,1520496408.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:48.834Z,1520496408.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:49.203Z,1520496409.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:49.605Z,1520496409.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:50.006Z,1520496410.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:50.432Z,1520496410.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:50.804Z,1520496410.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:51.201Z,1520496411.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:51.599Z,1520496411.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:52.005Z,1520496412.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:52.407Z,1520496412.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:52.809Z,1520496412.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:53.217Z,1520496413.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:53.608Z,1520496413.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:53.998Z,1520496413.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:54.403Z,1520496414.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:54.804Z,1520496414.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:55.206Z,1520496415.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:55.610Z,1520496415.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:56.018Z,1520496416.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:56.412Z,1520496416.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:56.803Z,1520496416.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:57.205Z,1520496417.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:57.602Z,1520496417.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:58.003Z,1520496418.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:58.405Z,1520496418.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:58.812Z,1520496418.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:59.209Z,1520496419.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:06:59.613Z,1520496419.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:00.002Z,1520496420.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:00.405Z,1520496420.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:00.809Z,1520496420.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:01.203Z,1520496421.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:01.611Z,1520496421.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:02.018Z,1520496422.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:02.412Z,1520496422.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:02.801Z,1520496422.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:03.205Z,1520496423.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:03.601Z,1520496423.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:04.003Z,1520496424.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:04.410Z,1520496424.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:04.847Z,1520496424.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:05.214Z,1520496425.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:05.611Z,1520496425.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:06.043Z,1520496426.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:06.407Z,1520496426.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:06.805Z,1520496426.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:07.212Z,1520496427.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:07.612Z,1520496427.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:08.012Z,1520496428.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:08.418Z,1520496428.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:08.803Z,1520496428.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:09.269Z,1520496429.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:09.606Z,1520496429.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:10.010Z,1520496430.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:10.405Z,1520496430.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:10.830Z,1520496430.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:11.214Z,1520496431.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:11.609Z,1520496431.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:12.025Z,1520496432.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:12.423Z,1520496432.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:12.813Z,1520496432.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:13.190Z,1520496433.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:13.610Z,1520496433.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:14.026Z,1520496434.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:14.418Z,1520496434.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:14.811Z,1520496434.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:15.215Z,1520496435.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:15.674Z,1520496435.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:16.058Z,1520496436.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:16.415Z,1520496436.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:16.824Z,1520496436.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:17.218Z,1520496437.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:17.615Z,1520496437.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:18.015Z,1520496438.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:18.413Z,1520496438.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:18.867Z,1520496438.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:19.216Z,1520496439.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:19.618Z,1520496439.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:20.014Z,1520496440.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:20.427Z,1520496440.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:20.796Z,1520496440.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:21.218Z,1520496441.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:21.593Z,1520496441.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:22.043Z,1520496442.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:22.402Z,1520496442.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:22.809Z,1520496442.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:23.235Z,1520496443.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:23.609Z,1520496443.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:24.001Z,1520496444.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:24.398Z,1520496444.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:24.804Z,1520496444.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:25.201Z,1520496445.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:25.607Z,1520496445.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:26.008Z,1520496446.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:26.525Z,1520496446.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:26.806Z,1520496446.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:27.211Z,1520496447.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:27.615Z,1520496447.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:28.004Z,1520496448.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:28.413Z,1520496448.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:28.819Z,1520496448.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:29.246Z,1520496449.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:29.613Z,1520496449.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:30.012Z,1520496450.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:30.411Z,1520496450.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:30.856Z,1520496450.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:31.206Z,1520496451.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:31.605Z,1520496451.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:32.063Z,1520496452.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:32.415Z,1520496452.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:32.809Z,1520496452.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:33.207Z,1520496453.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:33.617Z,1520496453.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:34.032Z,1520496454.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:34.394Z,1520496454.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:34.818Z,1520496454.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:35.243Z,1520496455.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:35.620Z,1520496455.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:38.897Z,1520496458.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:39.034Z,1520496459.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:39.417Z,1520496459.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:39.804Z,1520496459.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:40.208Z,1520496460.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:40.636Z,1520496460.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:41.007Z,1520496461.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:41.411Z,1520496461.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:41.816Z,1520496461.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:42.209Z,1520496462.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:42.597Z,1520496462.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:43.011Z,1520496463.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:43.409Z,1520496463.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:43.858Z,1520496463.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:44.216Z,1520496464.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:44.602Z,1520496464.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:44.999Z,1520496464.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:45.407Z,1520496465.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:45.810Z,1520496465.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:46.211Z,1520496466.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:46.601Z,1520496466.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:47.010Z,1520496467.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:47.414Z,1520496467.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:47.815Z,1520496467.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:48.210Z,1520496468.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:48.603Z,1520496468.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:49.008Z,1520496469.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:49.408Z,1520496469.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:49.809Z,1520496469.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:50.220Z,1520496470.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:50.605Z,1520496470.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:50.999Z,1520496470.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:51.410Z,1520496471.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:51.808Z,1520496471.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:52.202Z,1520496472.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:52.605Z,1520496472.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:53.009Z,1520496473.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:53.406Z,1520496473.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:53.815Z,1520496473.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:54.213Z,1520496474.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:54.609Z,1520496474.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:55.005Z,1520496475.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:55.409Z,1520496475.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:55.805Z,1520496475.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:56.208Z,1520496476.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:56.615Z,1520496476.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:57.013Z,1520496477.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:57.412Z,1520496477.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:57.809Z,1520496477.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:58.205Z,1520496478.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:58.609Z,1520496478.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:59.007Z,1520496479.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:59.409Z,1520496479.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:07:59.805Z,1520496479.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:00.207Z,1520496480.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:00.610Z,1520496480.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:01.057Z,1520496481.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:01.412Z,1520496481.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:01.805Z,1520496481.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:02.222Z,1520496482.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:02.625Z,1520496482.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:02.988Z,1520496482.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:03.412Z,1520496483.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:03.816Z,1520496483.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:04.216Z,1520496484.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:04.615Z,1520496484.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:04.998Z,1520496484.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:05.420Z,1520496485.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:05.819Z,1520496485.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:06.215Z,1520496486.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:06.595Z,1520496486.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:06.994Z,1520496486.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:07.422Z,1520496487.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:07.820Z,1520496487.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:08.219Z,1520496488.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:08.598Z,1520496488.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:08.991Z,1520496488.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:09.420Z,1520496489.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:09.821Z,1520496489.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:10.268Z,1520496490.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:10.599Z,1520496490.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:10.995Z,1520496490.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:11.404Z,1520496491.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:11.825Z,1520496491.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:12.200Z,1520496492.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:12.599Z,1520496492.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:12.998Z,1520496492.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:13.400Z,1520496493.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:13.804Z,1520496493.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:14.201Z,1520496494.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:14.596Z,1520496494.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:15.002Z,1520496495.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:15.398Z,1520496495.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:15.800Z,1520496495.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:16.215Z,1520496496.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:16.610Z,1520496496.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:17.006Z,1520496497.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:17.402Z,1520496497.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:17.802Z,1520496497.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:18.199Z,1520496498.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:18.610Z,1520496498.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:19.018Z,1520496499.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:19.410Z,1520496499.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:19.797Z,1520496499.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:20.203Z,1520496500.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:20.602Z,1520496500.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:20.999Z,1520496500.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:21.407Z,1520496501.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:21.805Z,1520496501.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:22.209Z,1520496502.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:22.602Z,1520496502.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:23.010Z,1520496503.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:23.405Z,1520496503.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:23.822Z,1520496503.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:24.214Z,1520496504.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:24.591Z,1520496504.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:25.011Z,1520496505.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:25.408Z,1520496505.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:25.812Z,1520496505.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:26.212Z,1520496506.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:26.611Z,1520496506.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:27.007Z,1520496507.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:27.398Z,1520496507.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:27.814Z,1520496507.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:28.180Z,1520496508.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:28.618Z,1520496508.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:29.011Z,1520496509.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:29.414Z,1520496509.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:29.806Z,1520496509.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:30.186Z,1520496510.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:30.616Z,1520496510.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:31.015Z,1520496511.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:31.414Z,1520496511.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:31.816Z,1520496511.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:32.237Z,1520496512.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:32.625Z,1520496512.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:32.997Z,1520496512.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:33.431Z,1520496513.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:33.806Z,1520496513.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:34.215Z,1520496514.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:34.617Z,1520496514.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:35.003Z,1520496515.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:35.394Z,1520496515.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:35.805Z,1520496515.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:38.904Z,1520496518.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:39.046Z,1520496519.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:39.387Z,1520496519.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:39.788Z,1520496519.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:40.166Z,1520496520.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:40.593Z,1520496520.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:40.999Z,1520496520.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:41.397Z,1520496521.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:41.798Z,1520496521.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:42.171Z,1520496522.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:42.568Z,1520496522.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:42.995Z,1520496522.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:43.373Z,1520496523.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:43.801Z,1520496523.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:44.199Z,1520496524.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:44.603Z,1520496524.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:44.978Z,1520496524.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:45.373Z,1520496525.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:45.772Z,1520496525.772 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:45.772Z,1520496525.772 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9
2018-03-08T08:08:45.772Z,1520496525.772 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T08:08:45.774Z,1520496525.774 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:45.774Z,1520496525.774 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-03-08T08:08:45.774Z,1520496525.774 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T08:08:45.776Z,1520496525.776 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:45.776Z,1520496525.776 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-03-08T08:08:45.776Z,1520496525.776 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T08:08:45.813Z,1520496525.813 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T08:08:45.813Z,1520496525.813 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T08:08:45.813Z,1520496525.813 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T08:08:46.187Z,1520496526.187 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T08:08:46.187Z,1520496526.187 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9
2018-03-08T08:08:46.188Z,1520496526.188 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T08:08:46.188Z,1520496526.188 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-03-08T08:08:46.197Z,1520496526.197 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T08:08:46.197Z,1520496526.197 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-03-08T08:08:46.591Z,1520496526.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T08:08:46.591Z,1520496526.591 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:08:46.591Z,1520496526.591 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:08:46.592Z,1520496526.592 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T08:08:46.592Z,1520496526.592 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:08:46.593Z,1520496526.593 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:08:46.593Z,1520496526.593 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T08:08:46.593Z,1520496526.593 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:08:46.594Z,1520496526.594 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:08:46.994Z,1520496526.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T08:08:46.995Z,1520496526.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:47.391Z,1520496527.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T08:08:47.392Z,1520496527.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:47.782Z,1520496527.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T08:08:47.783Z,1520496527.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:48.165Z,1520496528.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T08:08:48.166Z,1520496528.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:48.563Z,1520496528.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T08:08:48.564Z,1520496528.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:48.991Z,1520496528.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T08:08:48.992Z,1520496528.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:49.396Z,1520496529.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T08:08:49.397Z,1520496529.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:49.788Z,1520496529.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T08:08:49.789Z,1520496529.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:50.195Z,1520496530.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T08:08:50.196Z,1520496530.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:50.590Z,1520496530.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T08:08:50.591Z,1520496530.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:50.991Z,1520496530.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T08:08:50.991Z,1520496530.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:51.389Z,1520496531.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T08:08:51.390Z,1520496531.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:51.766Z,1520496531.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T08:08:51.767Z,1520496531.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:52.167Z,1520496532.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T08:08:52.168Z,1520496532.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:52.596Z,1520496532.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T08:08:52.597Z,1520496532.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:52.979Z,1520496532.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T08:08:52.980Z,1520496532.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:53.372Z,1520496533.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T08:08:53.373Z,1520496533.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:53.772Z,1520496533.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T08:08:53.773Z,1520496533.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:54.171Z,1520496534.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T08:08:54.172Z,1520496534.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:54.578Z,1520496534.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T08:08:54.579Z,1520496534.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:54.975Z,1520496534.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T08:08:54.976Z,1520496534.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:55.371Z,1520496535.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T08:08:55.372Z,1520496535.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:55.776Z,1520496535.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T08:08:55.777Z,1520496535.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:56.180Z,1520496536.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T08:08:56.181Z,1520496536.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:56.602Z,1520496536.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T08:08:56.603Z,1520496536.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:56.976Z,1520496536.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T08:08:56.977Z,1520496536.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:57.375Z,1520496537.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T08:08:57.375Z,1520496537.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:57.776Z,1520496537.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T08:08:57.777Z,1520496537.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:58.171Z,1520496538.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T08:08:58.172Z,1520496538.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:58.678Z,1520496538.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-08T08:08:58.679Z,1520496538.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:58.981Z,1520496538.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T08:08:58.982Z,1520496538.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:59.381Z,1520496539.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T08:08:59.382Z,1520496539.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:08:59.776Z,1520496539.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T08:08:59.777Z,1520496539.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:00.176Z,1520496540.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T08:09:00.177Z,1520496540.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:00.575Z,1520496540.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T08:09:00.577Z,1520496540.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:00.976Z,1520496540.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T08:09:00.977Z,1520496540.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:01.371Z,1520496541.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T08:09:01.372Z,1520496541.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:01.783Z,1520496541.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T08:09:01.784Z,1520496541.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:02.187Z,1520496542.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T08:09:02.187Z,1520496542.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:02.580Z,1520496542.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T08:09:02.581Z,1520496542.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:02.985Z,1520496542.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T08:09:02.986Z,1520496542.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:03.375Z,1520496543.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T08:09:03.376Z,1520496543.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:03.777Z,1520496543.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T08:09:03.778Z,1520496543.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:04.171Z,1520496544.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T08:09:04.172Z,1520496544.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:04.590Z,1520496544.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T08:09:04.591Z,1520496544.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:04.983Z,1520496544.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T08:09:04.984Z,1520496544.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:05.415Z,1520496545.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T08:09:05.416Z,1520496545.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:05.825Z,1520496545.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:06.192Z,1520496546.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:06.599Z,1520496546.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:06.987Z,1520496546.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:07.398Z,1520496547.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:07.796Z,1520496547.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:08.188Z,1520496548.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:08.590Z,1520496548.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:08.975Z,1520496548.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:09.385Z,1520496549.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:09.788Z,1520496549.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:10.183Z,1520496550.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:10.599Z,1520496550.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:10.991Z,1520496550.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:11.403Z,1520496551.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:11.791Z,1520496551.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:12.166Z,1520496552.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:12.563Z,1520496552.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:12.991Z,1520496552.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:13.396Z,1520496553.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:13.789Z,1520496553.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:14.199Z,1520496554.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:14.592Z,1520496554.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:14.967Z,1520496554.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:15.390Z,1520496555.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:15.767Z,1520496555.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:16.170Z,1520496556.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:16.600Z,1520496556.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:16.979Z,1520496556.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:17.372Z,1520496557.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:17.771Z,1520496557.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:18.174Z,1520496558.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:18.567Z,1520496558.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:18.979Z,1520496558.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:19.371Z,1520496559.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:19.784Z,1520496559.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:20.180Z,1520496560.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:20.607Z,1520496560.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:20.975Z,1520496560.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:21.374Z,1520496561.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:21.776Z,1520496561.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:22.173Z,1520496562.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:22.581Z,1520496562.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:22.981Z,1520496562.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:23.377Z,1520496563.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:23.775Z,1520496563.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:24.177Z,1520496564.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:24.573Z,1520496564.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:24.975Z,1520496564.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:25.377Z,1520496565.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:25.781Z,1520496565.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:26.180Z,1520496566.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:26.581Z,1520496566.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:26.975Z,1520496566.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:27.373Z,1520496567.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:27.781Z,1520496567.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:28.174Z,1520496568.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:28.584Z,1520496568.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:28.984Z,1520496568.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:29.384Z,1520496569.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:29.775Z,1520496569.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:30.178Z,1520496570.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:30.578Z,1520496570.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:30.982Z,1520496570.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:31.376Z,1520496571.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:31.784Z,1520496571.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:32.183Z,1520496572.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:32.585Z,1520496572.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:32.977Z,1520496572.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:33.386Z,1520496573.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:33.787Z,1520496573.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:34.175Z,1520496574.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:34.584Z,1520496574.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:34.983Z,1520496574.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:35.390Z,1520496575.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:35.778Z,1520496575.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:36.189Z,1520496576.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:39.278Z,1520496579.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:39.416Z,1520496579.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:39.778Z,1520496579.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:40.167Z,1520496580.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:40.576Z,1520496580.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:40.968Z,1520496580.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:41.372Z,1520496581.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:41.771Z,1520496581.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:42.151Z,1520496582.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:42.575Z,1520496582.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:42.979Z,1520496582.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:43.372Z,1520496583.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:43.750Z,1520496583.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:44.147Z,1520496584.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:44.552Z,1520496584.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:44.948Z,1520496584.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:45.345Z,1520496585.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:45.774Z,1520496585.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:46.172Z,1520496586.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:46.553Z,1520496586.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:46.952Z,1520496586.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:47.351Z,1520496587.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:47.749Z,1520496587.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:48.155Z,1520496588.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:48.582Z,1520496588.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:48.953Z,1520496588.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:49.381Z,1520496589.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:49.751Z,1520496589.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:50.144Z,1520496590.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:50.561Z,1520496590.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:50.958Z,1520496590.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:51.350Z,1520496591.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:51.763Z,1520496591.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:52.162Z,1520496592.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:52.558Z,1520496592.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:52.968Z,1520496592.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:53.396Z,1520496593.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:53.753Z,1520496593.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:54.152Z,1520496594.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:54.571Z,1520496594.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:54.969Z,1520496594.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:55.364Z,1520496595.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:55.762Z,1520496595.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:56.136Z,1520496596.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:56.562Z,1520496596.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:56.964Z,1520496596.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:57.340Z,1520496597.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:57.774Z,1520496597.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:58.168Z,1520496598.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:58.563Z,1520496598.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:58.962Z,1520496598.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:59.347Z,1520496599.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:09:59.745Z,1520496599.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:00.170Z,1520496600.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:00.577Z,1520496600.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:00.972Z,1520496600.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:01.375Z,1520496601.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:01.755Z,1520496601.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:02.144Z,1520496602.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:02.555Z,1520496602.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:02.953Z,1520496602.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:03.348Z,1520496603.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:03.778Z,1520496603.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:04.179Z,1520496604.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:04.549Z,1520496604.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:04.952Z,1520496604.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:05.358Z,1520496605.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:05.749Z,1520496605.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:06.154Z,1520496606.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:06.577Z,1520496606.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:06.953Z,1520496606.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:07.381Z,1520496607.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:07.752Z,1520496607.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:08.152Z,1520496608.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:08.552Z,1520496608.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:08.954Z,1520496608.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:09.349Z,1520496609.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:09.782Z,1520496609.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:10.162Z,1520496610.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:10.558Z,1520496610.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:10.955Z,1520496610.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:11.355Z,1520496611.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:11.750Z,1520496611.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:12.154Z,1520496612.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:12.563Z,1520496612.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:12.962Z,1520496612.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:13.358Z,1520496613.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:13.757Z,1520496613.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:14.148Z,1520496614.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:14.562Z,1520496614.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:14.957Z,1520496614.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:15.352Z,1520496615.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:15.763Z,1520496615.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:16.162Z,1520496616.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:16.561Z,1520496616.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:16.951Z,1520496616.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:17.349Z,1520496617.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:17.755Z,1520496617.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:18.155Z,1520496618.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:18.567Z,1520496618.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:18.966Z,1520496618.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:19.366Z,1520496619.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:19.757Z,1520496619.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:20.153Z,1520496620.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:20.554Z,1520496620.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:20.954Z,1520496620.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:21.351Z,1520496621.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:21.760Z,1520496621.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:22.160Z,1520496622.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:22.560Z,1520496622.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:22.954Z,1520496622.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:23.355Z,1520496623.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:23.784Z,1520496623.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:24.163Z,1520496624.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:24.603Z,1520496624.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:24.966Z,1520496624.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:25.401Z,1520496625.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:25.758Z,1520496625.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:26.162Z,1520496626.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:26.558Z,1520496626.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:26.958Z,1520496626.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:27.362Z,1520496627.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:27.768Z,1520496627.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:28.170Z,1520496628.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:28.566Z,1520496628.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:28.958Z,1520496628.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:29.359Z,1520496629.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:29.762Z,1520496629.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:30.162Z,1520496630.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:30.564Z,1520496630.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:30.974Z,1520496630.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:31.372Z,1520496631.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:31.758Z,1520496631.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:32.162Z,1520496632.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:32.558Z,1520496632.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:32.963Z,1520496632.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:33.362Z,1520496633.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:33.763Z,1520496633.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:34.166Z,1520496634.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:34.566Z,1520496634.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:34.962Z,1520496634.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:35.357Z,1520496635.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:35.762Z,1520496635.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:36.157Z,1520496636.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:36.570Z,1520496636.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:39.673Z,1520496639.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:39.826Z,1520496639.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:40.155Z,1520496640.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:40.563Z,1520496640.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:40.981Z,1520496640.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:41.367Z,1520496641.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:41.771Z,1520496641.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:42.149Z,1520496642.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:42.622Z,1520496642.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:42.951Z,1520496642.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:43.344Z,1520496643.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:43.751Z,1520496643.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:44.151Z,1520496644.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:44.552Z,1520496644.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:44.952Z,1520496644.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:45.353Z,1520496645.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:45.745Z,1520496645.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:46.146Z,1520496646.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:46.559Z,1520496646.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:46.953Z,1520496646.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:47.358Z,1520496647.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:47.750Z,1520496647.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:48.147Z,1520496648.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:48.544Z,1520496648.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:48.951Z,1520496648.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:49.347Z,1520496649.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:49.753Z,1520496649.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:50.158Z,1520496650.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:50.555Z,1520496650.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:50.942Z,1520496650.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:51.348Z,1520496651.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:51.746Z,1520496651.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:52.147Z,1520496652.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:52.545Z,1520496652.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:52.963Z,1520496652.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:53.363Z,1520496653.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:53.757Z,1520496653.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:54.146Z,1520496654.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:54.545Z,1520496654.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:54.946Z,1520496654.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:55.347Z,1520496655.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:55.756Z,1520496655.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:56.162Z,1520496656.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:56.557Z,1520496656.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:56.951Z,1520496656.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:57.342Z,1520496657.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:57.754Z,1520496657.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:58.151Z,1520496658.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:58.555Z,1520496658.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:58.959Z,1520496658.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:59.356Z,1520496659.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:10:59.741Z,1520496659.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:00.146Z,1520496660.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:00.546Z,1520496660.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:00.952Z,1520496660.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:01.346Z,1520496661.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:01.759Z,1520496661.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:02.159Z,1520496662.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:02.556Z,1520496662.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:02.950Z,1520496662.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:03.341Z,1520496663.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:03.748Z,1520496663.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:04.149Z,1520496664.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:04.557Z,1520496664.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:04.959Z,1520496664.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:05.357Z,1520496665.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:05.747Z,1520496665.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:06.146Z,1520496666.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:06.550Z,1520496666.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:06.942Z,1520496666.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:07.350Z,1520496667.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:07.754Z,1520496667.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:08.152Z,1520496668.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:08.549Z,1520496668.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:08.950Z,1520496668.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:09.349Z,1520496669.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:09.755Z,1520496669.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:10.149Z,1520496670.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:10.558Z,1520496670.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:10.959Z,1520496670.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:11.357Z,1520496671.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:11.746Z,1520496671.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:12.150Z,1520496672.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:12.551Z,1520496672.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:12.949Z,1520496672.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:13.354Z,1520496673.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:13.753Z,1520496673.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:14.158Z,1520496674.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:14.556Z,1520496674.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:14.950Z,1520496674.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:15.346Z,1520496675.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:15.746Z,1520496675.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:16.149Z,1520496676.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:16.558Z,1520496676.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:16.967Z,1520496676.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:17.357Z,1520496677.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:17.745Z,1520496677.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:18.147Z,1520496678.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:18.551Z,1520496678.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:18.941Z,1520496678.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:19.346Z,1520496679.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:19.753Z,1520496679.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:20.157Z,1520496680.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:20.556Z,1520496680.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:20.951Z,1520496680.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:21.341Z,1520496681.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:21.747Z,1520496681.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:22.151Z,1520496682.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:22.563Z,1520496682.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:22.960Z,1520496682.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:23.358Z,1520496683.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:23.747Z,1520496683.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:24.146Z,1520496684.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:24.550Z,1520496684.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:24.950Z,1520496684.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:25.350Z,1520496685.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:25.758Z,1520496685.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:26.160Z,1520496686.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:26.560Z,1520496686.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:26.954Z,1520496686.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:27.347Z,1520496687.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:27.748Z,1520496687.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:28.151Z,1520496688.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:28.559Z,1520496688.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:28.963Z,1520496688.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:29.356Z,1520496689.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:29.748Z,1520496689.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:30.150Z,1520496690.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:30.550Z,1520496690.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:30.943Z,1520496690.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:31.354Z,1520496691.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:31.763Z,1520496691.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:32.158Z,1520496692.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:32.554Z,1520496692.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:32.950Z,1520496692.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:33.347Z,1520496693.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:33.751Z,1520496693.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:34.151Z,1520496694.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:34.554Z,1520496694.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:34.957Z,1520496694.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:35.363Z,1520496695.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:35.366Z,1520496695.366 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T08:11:35.366Z,1520496695.366 [Default:CheckIn:C.Wait] Stopped
2018-03-08T08:11:35.366Z,1520496695.366 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T08:11:35.366Z,1520496695.366 [Default:CheckIn:D] Running Loop=1
2018-03-08T08:11:35.758Z,1520496695.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:35.762Z,1520496695.762 [Default:CheckIn:D] Stopped
2018-03-08T08:11:35.762Z,1520496695.762 [Default:CheckIn:E] Running Loop=1
2018-03-08T08:11:36.154Z,1520496696.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:36.157Z,1520496696.157 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 25.849286 min 
2018-03-08T08:11:36.158Z,1520496696.158 [Default:CheckIn:E] Stopped
2018-03-08T08:11:36.158Z,1520496696.158 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T08:11:36.158Z,1520496696.158 [Default:CheckIn] Stopped
2018-03-08T08:11:36.158Z,1520496696.158 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T08:11:36.158Z,1520496696.158 [Default:CheckIn](INFO): Running loop #3
2018-03-08T08:11:36.158Z,1520496696.158 [Default:CheckIn] Running Loop=3
2018-03-08T08:11:36.158Z,1520496696.158 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T08:11:36.158Z,1520496696.158 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T08:11:36.551Z,1520496696.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:36.956Z,1520496696.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:40.056Z,1520496700.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:40.070Z,1520496700.070 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T08:11:40.201Z,1520496700.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:40.559Z,1520496700.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:40.954Z,1520496700.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:41.354Z,1520496701.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:41.753Z,1520496701.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:42.125Z,1520496702.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:42.547Z,1520496702.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:42.947Z,1520496702.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:43.356Z,1520496703.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:43.723Z,1520496703.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:44.123Z,1520496704.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:44.525Z,1520496704.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:44.935Z,1520496704.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:45.330Z,1520496705.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:45.761Z,1520496705.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:46.137Z,1520496706.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:46.531Z,1520496706.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:46.929Z,1520496706.929 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:46.929Z,1520496706.929 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10
2018-03-08T08:11:46.929Z,1520496706.929 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T08:11:46.931Z,1520496706.931 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:46.931Z,1520496706.931 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-03-08T08:11:46.931Z,1520496706.931 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T08:11:46.933Z,1520496706.933 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:46.934Z,1520496706.934 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-03-08T08:11:46.934Z,1520496706.934 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T08:11:46.987Z,1520496706.987 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T08:11:46.988Z,1520496706.988 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T08:11:46.988Z,1520496706.988 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T08:11:47.343Z,1520496707.343 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T08:11:47.343Z,1520496707.343 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10
2018-03-08T08:11:47.343Z,1520496707.343 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T08:11:47.343Z,1520496707.343 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-03-08T08:11:47.344Z,1520496707.344 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T08:11:47.344Z,1520496707.344 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-03-08T08:11:47.734Z,1520496707.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T08:11:47.735Z,1520496707.735 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:11:47.735Z,1520496707.735 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:11:47.736Z,1520496707.736 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T08:11:47.736Z,1520496707.736 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:11:47.740Z,1520496707.740 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:11:47.741Z,1520496707.741 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T08:11:47.741Z,1520496707.741 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:11:47.742Z,1520496707.742 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:11:48.141Z,1520496708.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T08:11:48.142Z,1520496708.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:48.543Z,1520496708.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T08:11:48.543Z,1520496708.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:48.950Z,1520496708.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T08:11:48.951Z,1520496708.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:49.349Z,1520496709.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T08:11:49.350Z,1520496709.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:49.737Z,1520496709.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T08:11:49.738Z,1520496709.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:50.125Z,1520496710.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T08:11:50.126Z,1520496710.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:50.525Z,1520496710.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T08:11:50.526Z,1520496710.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:50.925Z,1520496710.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T08:11:50.926Z,1520496710.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:51.330Z,1520496711.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T08:11:51.331Z,1520496711.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:51.749Z,1520496711.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T08:11:51.750Z,1520496711.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:52.148Z,1520496712.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T08:11:52.149Z,1520496712.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:52.547Z,1520496712.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T08:11:52.548Z,1520496712.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:52.922Z,1520496712.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T08:11:52.923Z,1520496712.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:53.325Z,1520496713.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T08:11:53.326Z,1520496713.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:53.730Z,1520496713.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T08:11:53.731Z,1520496713.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:54.122Z,1520496714.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T08:11:54.123Z,1520496714.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:54.554Z,1520496714.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T08:11:54.555Z,1520496714.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:54.953Z,1520496714.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T08:11:54.954Z,1520496714.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:55.358Z,1520496715.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T08:11:55.359Z,1520496715.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:55.735Z,1520496715.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T08:11:55.735Z,1520496715.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:56.125Z,1520496716.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T08:11:56.126Z,1520496716.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:56.526Z,1520496716.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T08:11:56.527Z,1520496716.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:56.935Z,1520496716.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T08:11:56.936Z,1520496716.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:57.330Z,1520496717.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T08:11:57.330Z,1520496717.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:57.732Z,1520496717.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T08:11:57.734Z,1520496717.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:58.136Z,1520496718.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T08:11:58.137Z,1520496718.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:58.543Z,1520496718.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T08:11:58.544Z,1520496718.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:58.930Z,1520496718.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T08:11:58.931Z,1520496718.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:59.335Z,1520496719.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T08:11:59.336Z,1520496719.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:11:59.738Z,1520496719.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T08:11:59.739Z,1520496719.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:00.130Z,1520496720.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T08:12:00.131Z,1520496720.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:00.541Z,1520496720.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T08:12:00.542Z,1520496720.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:00.940Z,1520496720.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T08:12:00.941Z,1520496720.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:01.341Z,1520496721.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T08:12:01.342Z,1520496721.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:01.730Z,1520496721.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T08:12:01.731Z,1520496721.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:02.133Z,1520496722.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T08:12:02.134Z,1520496722.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:02.538Z,1520496722.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T08:12:02.539Z,1520496722.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:02.939Z,1520496722.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T08:12:02.939Z,1520496722.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:03.334Z,1520496723.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T08:12:03.335Z,1520496723.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:03.741Z,1520496723.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T08:12:03.742Z,1520496723.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:04.150Z,1520496724.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T08:12:04.151Z,1520496724.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:04.542Z,1520496724.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T08:12:04.543Z,1520496724.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:04.928Z,1520496724.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T08:12:04.929Z,1520496724.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:05.331Z,1520496725.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T08:12:05.332Z,1520496725.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:05.735Z,1520496725.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T08:12:05.736Z,1520496725.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:06.128Z,1520496726.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T08:12:06.129Z,1520496726.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:06.546Z,1520496726.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T08:12:06.547Z,1520496726.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:06.941Z,1520496726.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:07.338Z,1520496727.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:07.737Z,1520496727.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:08.137Z,1520496728.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:08.534Z,1520496728.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:08.942Z,1520496728.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:09.343Z,1520496729.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:09.747Z,1520496729.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:10.140Z,1520496730.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:10.539Z,1520496730.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:10.946Z,1520496730.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:11.316Z,1520496731.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:11.746Z,1520496731.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:12.122Z,1520496732.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:12.541Z,1520496732.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:12.954Z,1520496732.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:13.350Z,1520496733.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:13.718Z,1520496733.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:14.126Z,1520496734.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:14.525Z,1520496734.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:14.950Z,1520496734.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:15.330Z,1520496735.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:15.732Z,1520496735.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:16.129Z,1520496736.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:16.528Z,1520496736.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:16.926Z,1520496736.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:17.335Z,1520496737.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:17.735Z,1520496737.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:18.126Z,1520496738.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:18.539Z,1520496738.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:18.937Z,1520496738.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:19.339Z,1520496739.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:19.720Z,1520496739.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:20.125Z,1520496740.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:20.529Z,1520496740.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:20.939Z,1520496740.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:21.348Z,1520496741.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:21.742Z,1520496741.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:22.208Z,1520496742.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:22.541Z,1520496742.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:22.934Z,1520496742.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:23.342Z,1520496743.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:23.723Z,1520496743.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:24.121Z,1520496744.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:24.545Z,1520496744.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:25.009Z,1520496745.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:25.351Z,1520496745.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:25.719Z,1520496745.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:26.151Z,1520496746.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:26.523Z,1520496746.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:26.957Z,1520496746.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:27.348Z,1520496747.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:27.784Z,1520496747.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:28.146Z,1520496748.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:28.538Z,1520496748.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:28.926Z,1520496748.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:29.325Z,1520496749.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:29.730Z,1520496749.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:30.130Z,1520496750.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:30.537Z,1520496750.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:30.943Z,1520496750.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:31.339Z,1520496751.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:31.735Z,1520496751.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:32.130Z,1520496752.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:32.530Z,1520496752.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:32.931Z,1520496752.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:33.327Z,1520496753.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:33.740Z,1520496753.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:34.136Z,1520496754.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:34.536Z,1520496754.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:34.926Z,1520496754.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:35.339Z,1520496755.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:35.735Z,1520496755.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:36.130Z,1520496756.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:36.539Z,1520496756.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:36.939Z,1520496756.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:37.340Z,1520496757.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:40.427Z,1520496760.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:40.570Z,1520496760.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:40.924Z,1520496760.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:41.304Z,1520496761.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:41.726Z,1520496761.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:42.102Z,1520496762.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:42.500Z,1520496762.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:42.897Z,1520496762.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:43.304Z,1520496763.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:43.728Z,1520496763.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:44.127Z,1520496764.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:44.522Z,1520496764.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:44.917Z,1520496764.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:45.302Z,1520496765.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:45.699Z,1520496765.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:46.097Z,1520496766.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:46.496Z,1520496766.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:46.905Z,1520496766.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:47.304Z,1520496767.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:47.708Z,1520496767.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:48.098Z,1520496768.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:48.502Z,1520496768.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:48.902Z,1520496768.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:49.301Z,1520496769.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:49.706Z,1520496769.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:50.109Z,1520496770.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:50.505Z,1520496770.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:50.901Z,1520496770.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:51.301Z,1520496771.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:51.702Z,1520496771.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:52.099Z,1520496772.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:52.499Z,1520496772.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:52.905Z,1520496772.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:53.318Z,1520496773.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:53.709Z,1520496773.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:54.102Z,1520496774.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:54.499Z,1520496774.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:54.909Z,1520496774.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:55.303Z,1520496775.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:55.709Z,1520496775.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:56.111Z,1520496776.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:56.512Z,1520496776.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:56.906Z,1520496776.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:57.306Z,1520496777.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:57.703Z,1520496777.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:58.106Z,1520496778.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:58.503Z,1520496778.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:58.907Z,1520496778.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:59.312Z,1520496779.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:12:59.713Z,1520496779.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:00.114Z,1520496780.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:00.507Z,1520496780.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:00.909Z,1520496780.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:01.308Z,1520496781.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:01.759Z,1520496781.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:02.123Z,1520496782.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:02.509Z,1520496782.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:02.907Z,1520496782.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:03.315Z,1520496783.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:03.705Z,1520496783.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:04.111Z,1520496784.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:04.505Z,1520496784.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:04.913Z,1520496784.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:05.309Z,1520496785.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:05.709Z,1520496785.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:06.118Z,1520496786.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:06.510Z,1520496786.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:06.909Z,1520496786.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:07.309Z,1520496787.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:07.714Z,1520496787.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:08.122Z,1520496788.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:08.512Z,1520496788.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:08.906Z,1520496788.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:09.313Z,1520496789.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:09.713Z,1520496789.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:10.117Z,1520496790.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:10.487Z,1520496790.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:10.916Z,1520496790.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:11.317Z,1520496791.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:11.717Z,1520496791.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:12.117Z,1520496792.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:12.493Z,1520496792.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:12.892Z,1520496792.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:13.291Z,1520496793.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:13.722Z,1520496793.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:14.126Z,1520496794.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:14.517Z,1520496794.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:14.893Z,1520496794.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:15.318Z,1520496795.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:15.695Z,1520496795.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:16.095Z,1520496796.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:16.499Z,1520496796.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:16.935Z,1520496796.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:18.894Z,1520496798.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:19.030Z,1520496799.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:19.379Z,1520496799.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:19.786Z,1520496799.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:20.206Z,1520496800.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:20.587Z,1520496800.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:20.994Z,1520496800.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:21.380Z,1520496801.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:21.779Z,1520496801.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:22.176Z,1520496802.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:22.577Z,1520496802.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:22.983Z,1520496802.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:23.382Z,1520496803.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:23.760Z,1520496803.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:24.162Z,1520496804.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:24.566Z,1520496804.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:24.961Z,1520496804.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:25.366Z,1520496805.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:25.790Z,1520496805.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:26.197Z,1520496806.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:26.592Z,1520496806.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:26.963Z,1520496806.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:27.363Z,1520496807.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:27.767Z,1520496807.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:28.167Z,1520496808.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:28.565Z,1520496808.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:28.988Z,1520496808.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:29.388Z,1520496809.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:29.762Z,1520496809.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:30.166Z,1520496810.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:30.568Z,1520496810.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:30.964Z,1520496810.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:31.365Z,1520496811.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:31.784Z,1520496811.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:32.194Z,1520496812.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:32.580Z,1520496812.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:32.969Z,1520496812.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:33.364Z,1520496813.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:33.769Z,1520496813.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:34.170Z,1520496814.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:34.579Z,1520496814.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:34.972Z,1520496814.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:35.372Z,1520496815.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:35.775Z,1520496815.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:36.171Z,1520496816.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:36.572Z,1520496816.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:36.978Z,1520496816.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:37.371Z,1520496817.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:40.520Z,1520496820.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:40.659Z,1520496820.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:41.010Z,1520496821.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:41.404Z,1520496821.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:41.803Z,1520496821.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:42.186Z,1520496822.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:42.615Z,1520496822.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:43.011Z,1520496823.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:43.412Z,1520496823.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:43.790Z,1520496823.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:44.186Z,1520496824.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:44.610Z,1520496824.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:44.986Z,1520496824.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:45.415Z,1520496825.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:45.816Z,1520496825.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:46.219Z,1520496826.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:46.590Z,1520496826.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:46.994Z,1520496826.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:47.417Z,1520496827.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:47.794Z,1520496827.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:48.216Z,1520496828.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:48.588Z,1520496828.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:48.994Z,1520496828.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:49.413Z,1520496829.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:49.817Z,1520496829.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:50.214Z,1520496830.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:50.593Z,1520496830.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:50.988Z,1520496830.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:51.344Z,1520496831.344 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T08:13:51.344Z,1520496831.344 [NAL9602] Data Fault, FailCount= 4
2018-03-08T08:13:51.344Z,1520496831.344 [NAL9602](ERROR): Data Fault
2018-03-08T08:13:51.413Z,1520496831.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:51.445Z,1520496831.445 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T08:13:51.760Z,1520496831.760 [NAL9602](INFO): Powering down
2018-03-08T08:13:51.793Z,1520496831.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:52.220Z,1520496832.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:52.584Z,1520496832.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:52.598Z,1520496832.598 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T08:13:52.598Z,1520496832.598 [NAL9602] No Fault, FailCount= 4
2018-03-08T08:13:52.991Z,1520496832.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:53.394Z,1520496833.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:53.788Z,1520496833.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:54.193Z,1520496834.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:54.593Z,1520496834.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:54.995Z,1520496834.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:55.393Z,1520496835.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:55.793Z,1520496835.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:56.193Z,1520496836.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:56.589Z,1520496836.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:56.992Z,1520496836.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:57.387Z,1520496837.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:57.794Z,1520496837.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:58.193Z,1520496838.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:58.584Z,1520496838.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:58.994Z,1520496838.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:59.387Z,1520496839.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:13:59.788Z,1520496839.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:00.189Z,1520496840.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:00.595Z,1520496840.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:00.987Z,1520496840.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:01.388Z,1520496841.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:01.789Z,1520496841.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:02.190Z,1520496842.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:02.590Z,1520496842.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:02.993Z,1520496842.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:03.388Z,1520496843.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:03.789Z,1520496843.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:04.198Z,1520496844.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:04.583Z,1520496844.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:04.993Z,1520496844.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:05.397Z,1520496845.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:05.787Z,1520496845.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:06.189Z,1520496846.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:06.593Z,1520496846.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:06.994Z,1520496846.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:07.394Z,1520496847.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:07.793Z,1520496847.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:08.194Z,1520496848.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:08.589Z,1520496848.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:08.993Z,1520496848.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:09.387Z,1520496849.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:09.789Z,1520496849.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:10.195Z,1520496850.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:10.584Z,1520496850.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:10.994Z,1520496850.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:11.394Z,1520496851.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:11.787Z,1520496851.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:12.198Z,1520496852.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:12.591Z,1520496852.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:12.994Z,1520496852.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:13.389Z,1520496853.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:13.794Z,1520496853.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:14.193Z,1520496854.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:14.593Z,1520496854.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:14.995Z,1520496854.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:15.387Z,1520496855.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:15.794Z,1520496855.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:16.193Z,1520496856.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:16.586Z,1520496856.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:16.994Z,1520496856.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:17.394Z,1520496857.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:17.788Z,1520496857.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:18.203Z,1520496858.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:18.590Z,1520496858.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:18.988Z,1520496858.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:19.394Z,1520496859.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:19.795Z,1520496859.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:20.198Z,1520496860.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:20.599Z,1520496860.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:20.994Z,1520496860.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:21.391Z,1520496861.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:21.789Z,1520496861.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:22.154Z,1520496862.154 [NAL9602](INFO): Powering up NAL9602
2018-03-08T08:14:22.203Z,1520496862.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:22.594Z,1520496862.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:22.989Z,1520496862.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:23.394Z,1520496863.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:23.789Z,1520496863.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:24.190Z,1520496864.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:24.597Z,1520496864.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:24.994Z,1520496864.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:25.390Z,1520496865.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:25.794Z,1520496865.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:26.192Z,1520496866.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:26.595Z,1520496866.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:26.993Z,1520496866.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:27.394Z,1520496867.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:27.791Z,1520496867.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:28.202Z,1520496868.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:28.591Z,1520496868.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:28.991Z,1520496868.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:29.390Z,1520496869.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:29.795Z,1520496869.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:30.195Z,1520496870.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:30.591Z,1520496870.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:30.993Z,1520496870.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:31.394Z,1520496871.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:31.787Z,1520496871.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:32.195Z,1520496872.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:32.593Z,1520496872.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:32.995Z,1520496872.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:33.350Z,1520496873.350 [NAL9602](INFO): NAL9602 initialized
2018-03-08T08:14:33.406Z,1520496873.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:33.794Z,1520496873.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:34.207Z,1520496874.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:34.600Z,1520496874.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:34.000Z,1520496875.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:35.391Z,1520496875.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:35.794Z,1520496875.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:36.199Z,1520496876.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:36.595Z,1520496876.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:37.006Z,1520496877.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:37.399Z,1520496877.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:41.553Z,1520496881.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:41.690Z,1520496881.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:42.042Z,1520496882.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:42.436Z,1520496882.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:42.835Z,1520496882.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:43.236Z,1520496883.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:43.639Z,1520496883.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:44.037Z,1520496884.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:44.439Z,1520496884.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:44.835Z,1520496884.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:45.216Z,1520496885.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:45.638Z,1520496885.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:46.042Z,1520496886.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:46.436Z,1520496886.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:46.847Z,1520496886.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:47.228Z,1520496887.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:47.623Z,1520496887.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:48.026Z,1520496888.026 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:48.027Z,1520496888.027 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11
2018-03-08T08:14:48.027Z,1520496888.027 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T08:14:48.057Z,1520496888.057 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:48.057Z,1520496888.057 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-03-08T08:14:48.057Z,1520496888.057 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T08:14:48.059Z,1520496888.059 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:48.059Z,1520496888.059 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-03-08T08:14:48.059Z,1520496888.059 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T08:14:48.095Z,1520496888.095 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T08:14:48.095Z,1520496888.095 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T08:14:48.095Z,1520496888.095 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T08:14:48.457Z,1520496888.457 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T08:14:48.457Z,1520496888.457 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11
2018-03-08T08:14:48.458Z,1520496888.458 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T08:14:48.458Z,1520496888.458 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-03-08T08:14:48.458Z,1520496888.458 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T08:14:48.458Z,1520496888.458 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-03-08T08:14:48.821Z,1520496888.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T08:14:48.821Z,1520496888.821 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:14:48.822Z,1520496888.822 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:14:48.822Z,1520496888.822 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T08:14:48.822Z,1520496888.822 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:14:48.823Z,1520496888.823 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:14:48.823Z,1520496888.823 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T08:14:48.824Z,1520496888.824 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:14:48.824Z,1520496888.824 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:14:49.242Z,1520496889.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T08:14:49.243Z,1520496889.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:49.634Z,1520496889.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T08:14:49.635Z,1520496889.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:50.032Z,1520496890.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T08:14:50.033Z,1520496890.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:50.427Z,1520496890.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T08:14:50.428Z,1520496890.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:50.823Z,1520496890.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T08:14:50.824Z,1520496890.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:51.228Z,1520496891.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T08:14:51.229Z,1520496891.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:51.627Z,1520496891.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T08:14:51.628Z,1520496891.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:52.036Z,1520496892.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T08:14:52.038Z,1520496892.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:52.433Z,1520496892.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T08:14:52.434Z,1520496892.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:52.832Z,1520496892.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T08:14:52.833Z,1520496892.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:53.222Z,1520496893.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T08:14:53.223Z,1520496893.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:53.626Z,1520496893.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T08:14:53.627Z,1520496893.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:54.026Z,1520496894.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T08:14:54.027Z,1520496894.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:54.424Z,1520496894.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T08:14:54.425Z,1520496894.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:54.827Z,1520496894.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T08:14:54.828Z,1520496894.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:55.236Z,1520496895.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T08:14:55.237Z,1520496895.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:55.643Z,1520496895.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T08:14:55.644Z,1520496895.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:56.036Z,1520496896.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T08:14:56.037Z,1520496896.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:56.424Z,1520496896.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T08:14:56.425Z,1520496896.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:56.829Z,1520496896.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T08:14:56.830Z,1520496896.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:57.223Z,1520496897.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T08:14:57.224Z,1520496897.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:57.630Z,1520496897.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T08:14:57.631Z,1520496897.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:58.038Z,1520496898.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T08:14:58.039Z,1520496898.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:58.433Z,1520496898.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T08:14:58.434Z,1520496898.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:58.842Z,1520496898.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T08:14:58.843Z,1520496898.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:59.228Z,1520496899.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T08:14:59.229Z,1520496899.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:14:59.616Z,1520496899.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T08:14:59.617Z,1520496899.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:00.030Z,1520496900.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T08:15:00.031Z,1520496900.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:00.430Z,1520496900.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T08:15:00.431Z,1520496900.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:00.829Z,1520496900.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T08:15:00.830Z,1520496900.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:01.235Z,1520496901.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T08:15:01.236Z,1520496901.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:01.633Z,1520496901.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T08:15:01.634Z,1520496901.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:02.042Z,1520496902.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T08:15:02.043Z,1520496902.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:02.430Z,1520496902.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T08:15:02.431Z,1520496902.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:02.830Z,1520496902.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T08:15:02.831Z,1520496902.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:03.229Z,1520496903.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T08:15:03.230Z,1520496903.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:03.629Z,1520496903.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T08:15:03.630Z,1520496903.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:04.041Z,1520496904.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T08:15:04.041Z,1520496904.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:04.434Z,1520496904.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T08:15:04.435Z,1520496904.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:04.832Z,1520496904.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T08:15:04.833Z,1520496904.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:05.230Z,1520496905.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T08:15:05.230Z,1520496905.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:05.607Z,1520496905.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T08:15:05.616Z,1520496905.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:06.033Z,1520496906.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T08:15:06.034Z,1520496906.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:06.434Z,1520496906.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T08:15:06.435Z,1520496906.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:06.811Z,1520496906.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T08:15:06.811Z,1520496906.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:07.242Z,1520496907.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T08:15:07.243Z,1520496907.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:07.644Z,1520496907.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T08:15:07.645Z,1520496907.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:08.046Z,1520496908.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:08.435Z,1520496908.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:08.843Z,1520496908.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:09.215Z,1520496909.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:09.641Z,1520496909.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:10.040Z,1520496910.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:10.440Z,1520496910.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:10.846Z,1520496910.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:11.243Z,1520496911.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:11.611Z,1520496911.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:12.039Z,1520496912.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:12.443Z,1520496912.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:12.811Z,1520496912.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:13.246Z,1520496913.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:13.643Z,1520496913.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:14.036Z,1520496914.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:14.439Z,1520496914.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:14.843Z,1520496914.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:15.215Z,1520496915.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:15.637Z,1520496915.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:16.047Z,1520496916.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:16.444Z,1520496916.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:16.842Z,1520496916.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:17.246Z,1520496917.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:17.611Z,1520496917.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:18.043Z,1520496918.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:18.422Z,1520496918.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:18.814Z,1520496918.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:19.248Z,1520496919.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:19.650Z,1520496919.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:20.046Z,1520496920.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:20.426Z,1520496920.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:20.821Z,1520496920.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:21.221Z,1520496921.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:21.621Z,1520496921.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:22.049Z,1520496922.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:22.425Z,1520496922.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:22.848Z,1520496922.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:23.251Z,1520496923.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:23.615Z,1520496923.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:24.020Z,1520496924.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:24.423Z,1520496924.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:24.816Z,1520496924.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:25.245Z,1520496925.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:25.645Z,1520496925.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:26.048Z,1520496926.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:26.427Z,1520496926.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:26.818Z,1520496926.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:27.230Z,1520496927.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:27.622Z,1520496927.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:28.036Z,1520496928.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:28.434Z,1520496928.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:28.853Z,1520496928.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:29.224Z,1520496929.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:29.623Z,1520496929.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:30.024Z,1520496930.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:30.422Z,1520496930.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:30.825Z,1520496930.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:31.253Z,1520496931.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:31.646Z,1520496931.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:32.031Z,1520496932.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:32.433Z,1520496932.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:32.838Z,1520496932.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:33.233Z,1520496933.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:33.633Z,1520496933.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:34.038Z,1520496934.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:34.440Z,1520496934.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:34.839Z,1520496934.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:35.236Z,1520496935.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:35.608Z,1520496935.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:36.034Z,1520496936.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:36.443Z,1520496936.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:36.815Z,1520496936.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:37.240Z,1520496937.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:37.643Z,1520496937.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:40.739Z,1520496940.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:40.887Z,1520496940.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:41.218Z,1520496941.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:41.611Z,1520496941.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:42.038Z,1520496942.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:42.416Z,1520496942.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:42.840Z,1520496942.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:43.218Z,1520496943.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:43.615Z,1520496943.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:44.010Z,1520496944.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:44.412Z,1520496944.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:44.809Z,1520496944.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:45.239Z,1520496945.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:45.611Z,1520496945.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:46.016Z,1520496946.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:46.411Z,1520496946.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:46.805Z,1520496946.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:47.212Z,1520496947.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:47.610Z,1520496947.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:48.013Z,1520496948.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:48.417Z,1520496948.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:48.838Z,1520496948.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:49.211Z,1520496949.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:49.609Z,1520496949.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:50.010Z,1520496950.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:50.411Z,1520496950.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:50.809Z,1520496950.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:51.240Z,1520496951.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:51.638Z,1520496951.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:52.012Z,1520496952.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:52.410Z,1520496952.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:52.813Z,1520496952.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:53.210Z,1520496953.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:53.610Z,1520496953.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:54.016Z,1520496954.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:54.416Z,1520496954.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:54.840Z,1520496954.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:55.207Z,1520496955.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:55.617Z,1520496955.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:56.012Z,1520496956.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:56.415Z,1520496956.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:56.810Z,1520496956.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:57.216Z,1520496957.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:57.617Z,1520496957.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:58.017Z,1520496958.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:58.413Z,1520496958.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:58.807Z,1520496958.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:59.214Z,1520496959.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:15:59.611Z,1520496959.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:00.021Z,1520496960.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:00.420Z,1520496960.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:00.817Z,1520496960.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:01.218Z,1520496961.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:01.615Z,1520496961.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:02.014Z,1520496962.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:02.415Z,1520496962.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:02.811Z,1520496962.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:03.216Z,1520496963.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:03.617Z,1520496963.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:04.016Z,1520496964.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:04.411Z,1520496964.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:04.805Z,1520496964.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:05.218Z,1520496965.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:05.615Z,1520496965.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:06.017Z,1520496966.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:06.442Z,1520496966.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:06.816Z,1520496966.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:07.213Z,1520496967.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:07.614Z,1520496967.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:08.013Z,1520496968.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:08.415Z,1520496968.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:08.819Z,1520496968.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:09.216Z,1520496969.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:09.616Z,1520496969.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:10.015Z,1520496970.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:10.414Z,1520496970.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:10.804Z,1520496970.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:11.211Z,1520496971.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:11.613Z,1520496971.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:12.017Z,1520496972.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:12.417Z,1520496972.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:12.822Z,1520496972.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:13.214Z,1520496973.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:13.609Z,1520496973.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:14.010Z,1520496974.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:14.414Z,1520496974.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:14.813Z,1520496974.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:15.216Z,1520496975.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:15.661Z,1520496975.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:16.021Z,1520496976.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:16.413Z,1520496976.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:16.817Z,1520496976.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:17.222Z,1520496977.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:17.613Z,1520496977.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:18.024Z,1520496978.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:18.424Z,1520496978.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:18.824Z,1520496978.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:19.216Z,1520496979.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:19.618Z,1520496979.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:20.018Z,1520496980.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:20.416Z,1520496980.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:20.818Z,1520496980.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:21.224Z,1520496981.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:21.622Z,1520496981.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:22.022Z,1520496982.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:22.418Z,1520496982.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:22.818Z,1520496982.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:23.215Z,1520496983.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:23.621Z,1520496983.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:24.030Z,1520496984.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:24.427Z,1520496984.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:24.828Z,1520496984.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:25.215Z,1520496985.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:25.619Z,1520496985.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:26.018Z,1520496986.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:26.417Z,1520496986.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:26.817Z,1520496986.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:27.225Z,1520496987.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:27.623Z,1520496987.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:28.020Z,1520496988.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:28.418Z,1520496988.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:28.795Z,1520496988.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:29.225Z,1520496989.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:29.602Z,1520496989.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:30.026Z,1520496990.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:30.433Z,1520496990.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:30.842Z,1520496990.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:31.226Z,1520496991.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:31.630Z,1520496991.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:32.003Z,1520496992.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:32.407Z,1520496992.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:32.814Z,1520496992.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:33.233Z,1520496993.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:33.636Z,1520496993.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:34.034Z,1520496994.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:34.410Z,1520496994.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:34.809Z,1520496994.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:35.226Z,1520496995.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:35.611Z,1520496995.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:36.038Z,1520496996.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:36.438Z,1520496996.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:36.442Z,1520496996.442 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T08:11:36.2Z
2018-03-08T08:16:36.442Z,1520496996.442 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T08:16:36.442Z,1520496996.442 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T08:16:36.817Z,1520496996.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:37.291Z,1520496997.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:37.616Z,1520496997.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:40.712Z,1520497000.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:40.825Z,1520497000.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:41.165Z,1520497001.165 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0012.lzma
2018-03-08T08:16:41.228Z,1520497001.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:41.621Z,1520497001.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:41.963Z,1520497001.963 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0012.lzma.bak
2018-03-08T08:16:41.963Z,1520497001.963 [DataOverHttps](INFO): SBD MOMSN=7984024
2018-03-08T08:16:42.042Z,1520497002.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:42.580Z,1520497002.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:42.804Z,1520497002.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:45.914Z,1520497005.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:46.031Z,1520497006.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:46.413Z,1520497006.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:46.811Z,1520497006.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:47.211Z,1520497007.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:47.610Z,1520497007.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:47.987Z,1520497007.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:51.206Z,1520497011.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:51.351Z,1520497011.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:51.633Z,1520497011.633 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180308T074127/Express0013.lzma
2018-03-08T08:16:51.687Z,1520497011.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:52.084Z,1520497012.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:52.431Z,1520497012.431 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0013.lzma.bak
2018-03-08T08:16:52.431Z,1520497012.431 [DataOverHttps](INFO): SBD MOMSN=7984026
2018-03-08T08:16:52.505Z,1520497012.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:53.035Z,1520497013.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:53.038Z,1520497013.038 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T08:16:53.038Z,1520497013.038 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T08:16:53.038Z,1520497013.038 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T08:16:53.286Z,1520497013.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:56.386Z,1520497016.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:56.553Z,1520497016.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:56.911Z,1520497016.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:57.283Z,1520497017.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:57.678Z,1520497017.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:58.078Z,1520497018.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:58.474Z,1520497018.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:58.882Z,1520497018.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:59.309Z,1520497019.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:16:59.688Z,1520497019.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:00.088Z,1520497020.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:00.482Z,1520497020.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:00.875Z,1520497020.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:01.279Z,1520497021.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:01.695Z,1520497021.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:02.096Z,1520497022.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:02.496Z,1520497022.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:02.888Z,1520497022.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:03.301Z,1520497023.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:03.691Z,1520497023.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:04.086Z,1520497024.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:04.522Z,1520497024.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:04.893Z,1520497024.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:05.322Z,1520497025.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:05.693Z,1520497025.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:06.099Z,1520497026.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:06.484Z,1520497026.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:06.886Z,1520497026.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:07.290Z,1520497027.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:07.689Z,1520497027.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:08.093Z,1520497028.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:08.507Z,1520497028.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:08.893Z,1520497028.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:09.290Z,1520497029.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:09.687Z,1520497029.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:10.096Z,1520497030.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:10.535Z,1520497030.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:10.891Z,1520497030.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:11.309Z,1520497031.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:11.741Z,1520497031.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:12.105Z,1520497032.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:12.508Z,1520497032.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:12.905Z,1520497032.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:13.276Z,1520497033.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:13.702Z,1520497033.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:14.111Z,1520497034.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:14.508Z,1520497034.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:14.908Z,1520497034.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:15.279Z,1520497035.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:15.675Z,1520497035.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:16.080Z,1520497036.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:16.482Z,1520497036.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:16.878Z,1520497036.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:17.285Z,1520497037.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:17.684Z,1520497037.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:18.117Z,1520497038.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:18.483Z,1520497038.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:18.883Z,1520497038.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:19.283Z,1520497039.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:19.696Z,1520497039.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:20.097Z,1520497040.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:20.531Z,1520497040.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:20.906Z,1520497040.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:21.297Z,1520497041.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:21.696Z,1520497041.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:22.100Z,1520497042.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:22.494Z,1520497042.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:22.895Z,1520497042.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:23.297Z,1520497043.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:23.703Z,1520497043.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:24.096Z,1520497044.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:24.493Z,1520497044.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:24.890Z,1520497044.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:25.293Z,1520497045.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:25.686Z,1520497045.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:26.099Z,1520497046.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:26.495Z,1520497046.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:26.901Z,1520497046.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:27.301Z,1520497047.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:27.672Z,1520497047.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:28.101Z,1520497048.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:28.479Z,1520497048.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:28.876Z,1520497048.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:29.299Z,1520497049.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:29.701Z,1520497049.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:30.101Z,1520497050.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:30.503Z,1520497050.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:30.878Z,1520497050.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:31.276Z,1520497051.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:31.704Z,1520497051.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:32.102Z,1520497052.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:32.506Z,1520497052.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:32.910Z,1520497052.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:33.278Z,1520497053.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:33.679Z,1520497053.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:34.078Z,1520497054.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:34.483Z,1520497054.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:34.875Z,1520497054.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:35.308Z,1520497055.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:35.706Z,1520497055.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:36.092Z,1520497056.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:36.493Z,1520497056.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:36.891Z,1520497056.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:37.288Z,1520497057.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:37.691Z,1520497057.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:38.092Z,1520497058.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:38.492Z,1520497058.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:38.898Z,1520497058.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:39.287Z,1520497059.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:39.680Z,1520497059.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:40.082Z,1520497060.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:40.490Z,1520497060.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:40.877Z,1520497060.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:41.292Z,1520497061.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:41.691Z,1520497061.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:42.098Z,1520497062.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:42.491Z,1520497062.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:42.882Z,1520497062.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:43.280Z,1520497063.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:43.692Z,1520497063.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:44.092Z,1520497064.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:44.487Z,1520497064.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:44.886Z,1520497064.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:45.286Z,1520497065.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:45.679Z,1520497065.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:46.084Z,1520497066.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:46.482Z,1520497066.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:46.888Z,1520497066.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:47.298Z,1520497067.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:47.691Z,1520497067.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:48.091Z,1520497068.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:48.486Z,1520497068.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:48.891Z,1520497068.891 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:48.891Z,1520497068.891 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12
2018-03-08T08:17:48.891Z,1520497068.891 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T08:17:48.893Z,1520497068.893 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:48.893Z,1520497068.893 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-03-08T08:17:48.893Z,1520497068.893 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T08:17:48.894Z,1520497068.894 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:48.895Z,1520497068.895 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-03-08T08:17:48.895Z,1520497068.895 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T08:17:48.918Z,1520497068.918 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T08:17:48.919Z,1520497068.919 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T08:17:48.919Z,1520497068.919 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T08:17:49.302Z,1520497069.302 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T08:17:49.302Z,1520497069.302 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12
2018-03-08T08:17:49.302Z,1520497069.302 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T08:17:49.303Z,1520497069.303 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-03-08T08:17:49.303Z,1520497069.303 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T08:17:49.303Z,1520497069.303 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-03-08T08:17:49.693Z,1520497069.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T08:17:49.694Z,1520497069.694 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:17:49.694Z,1520497069.694 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:17:49.694Z,1520497069.694 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T08:17:49.695Z,1520497069.695 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:17:49.695Z,1520497069.695 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:17:49.695Z,1520497069.695 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T08:17:49.696Z,1520497069.696 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:17:49.696Z,1520497069.696 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:17:50.092Z,1520497070.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T08:17:50.093Z,1520497070.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:50.502Z,1520497070.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T08:17:50.503Z,1520497070.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:50.883Z,1520497070.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T08:17:50.884Z,1520497070.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:51.290Z,1520497071.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T08:17:51.290Z,1520497071.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:51.689Z,1520497071.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T08:17:51.690Z,1520497071.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:52.083Z,1520497072.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T08:17:52.085Z,1520497072.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:52.484Z,1520497072.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T08:17:52.485Z,1520497072.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:52.899Z,1520497072.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T08:17:52.900Z,1520497072.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:53.303Z,1520497073.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T08:17:53.303Z,1520497073.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:53.697Z,1520497073.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T08:17:53.698Z,1520497073.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:57.104Z,1520497077.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2018-03-08T08:17:57.105Z,1520497077.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:57.264Z,1520497077.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T08:17:57.269Z,1520497077.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:57.649Z,1520497077.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T08:17:57.650Z,1520497077.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:58.058Z,1520497078.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T08:17:58.059Z,1520497078.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:58.451Z,1520497078.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T08:17:58.452Z,1520497078.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:58.851Z,1520497078.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T08:17:58.852Z,1520497078.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:59.224Z,1520497079.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-03-08T08:17:59.225Z,1520497079.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:17:59.650Z,1520497079.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T08:17:59.651Z,1520497079.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:00.065Z,1520497080.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T08:18:00.066Z,1520497080.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:00.432Z,1520497080.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2018-03-08T08:18:00.441Z,1520497080.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:00.871Z,1520497080.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T08:18:00.872Z,1520497080.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:01.259Z,1520497081.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T08:18:01.260Z,1520497081.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:01.628Z,1520497081.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2018-03-08T08:18:01.629Z,1520497081.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:02.031Z,1520497082.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2018-03-08T08:18:02.032Z,1520497082.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:02.452Z,1520497082.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T08:18:02.453Z,1520497082.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:02.828Z,1520497082.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2018-03-08T08:18:02.829Z,1520497082.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:03.253Z,1520497083.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T08:18:03.254Z,1520497083.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:03.643Z,1520497083.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T08:18:03.644Z,1520497083.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:04.038Z,1520497084.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2018-03-08T08:18:04.039Z,1520497084.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:04.431Z,1520497084.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-03-08T08:18:04.432Z,1520497084.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:04.844Z,1520497084.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T08:18:04.865Z,1520497084.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:05.266Z,1520497085.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T08:18:05.267Z,1520497085.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:05.632Z,1520497085.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2018-03-08T08:18:05.633Z,1520497085.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:06.031Z,1520497086.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2018-03-08T08:18:06.032Z,1520497086.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:06.431Z,1520497086.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2018-03-08T08:18:06.432Z,1520497086.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:06.832Z,1520497086.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2018-03-08T08:18:06.833Z,1520497086.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:07.230Z,1520497087.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-03-08T08:18:07.231Z,1520497087.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:07.639Z,1520497087.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-03-08T08:18:07.640Z,1520497087.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:08.061Z,1520497088.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T08:18:08.062Z,1520497088.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:08.442Z,1520497088.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T08:18:08.443Z,1520497088.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:08.825Z,1520497088.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-03-08T08:18:08.826Z,1520497088.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:09.231Z,1520497089.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:09.631Z,1520497089.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:10.031Z,1520497090.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:10.461Z,1520497090.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:10.838Z,1520497090.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:11.244Z,1520497091.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:11.670Z,1520497091.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:12.023Z,1520497092.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:12.469Z,1520497092.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:12.825Z,1520497092.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:13.223Z,1520497093.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:13.639Z,1520497093.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:14.036Z,1520497094.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:14.442Z,1520497094.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:14.816Z,1520497094.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:15.239Z,1520497095.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:15.634Z,1520497095.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:16.041Z,1520497096.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:16.441Z,1520497096.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:16.846Z,1520497096.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:17.243Z,1520497097.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:17.643Z,1520497097.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:18.038Z,1520497098.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:18.435Z,1520497098.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:18.837Z,1520497098.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:19.238Z,1520497099.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:19.641Z,1520497099.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:20.044Z,1520497100.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:20.445Z,1520497100.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:20.841Z,1520497100.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:21.237Z,1520497101.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:21.638Z,1520497101.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:22.036Z,1520497102.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:22.436Z,1520497102.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:22.844Z,1520497102.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:23.246Z,1520497103.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:23.642Z,1520497103.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:24.038Z,1520497104.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:24.437Z,1520497104.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:24.837Z,1520497104.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:25.238Z,1520497105.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:25.644Z,1520497105.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:26.044Z,1520497106.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:26.445Z,1520497106.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:26.828Z,1520497106.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:27.242Z,1520497107.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:27.645Z,1520497107.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:28.037Z,1520497108.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:28.445Z,1520497108.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:28.848Z,1520497108.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:29.252Z,1520497109.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:29.650Z,1520497109.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:30.022Z,1520497110.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:30.419Z,1520497110.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:30.826Z,1520497110.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:31.225Z,1520497111.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:31.632Z,1520497111.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:32.054Z,1520497112.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:32.458Z,1520497112.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:32.830Z,1520497112.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:33.230Z,1520497113.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:33.629Z,1520497113.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:34.031Z,1520497114.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:34.430Z,1520497114.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:34.860Z,1520497114.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:35.240Z,1520497115.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:35.644Z,1520497115.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:36.034Z,1520497116.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:36.427Z,1520497116.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:36.832Z,1520497116.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:37.230Z,1520497117.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:37.643Z,1520497117.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:38.040Z,1520497118.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:38.436Z,1520497118.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:38.830Z,1520497118.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:39.234Z,1520497119.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:39.634Z,1520497119.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:40.034Z,1520497120.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:40.434Z,1520497120.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:40.837Z,1520497120.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:41.240Z,1520497121.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:41.636Z,1520497121.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:42.031Z,1520497122.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:42.429Z,1520497122.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:42.833Z,1520497122.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:43.234Z,1520497123.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:43.637Z,1520497123.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:44.041Z,1520497124.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:44.436Z,1520497124.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:44.826Z,1520497124.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:45.231Z,1520497125.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:45.632Z,1520497125.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:46.035Z,1520497126.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:46.439Z,1520497126.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:46.836Z,1520497126.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:47.240Z,1520497127.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:47.637Z,1520497127.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:48.030Z,1520497128.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:48.434Z,1520497128.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:48.837Z,1520497128.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:49.238Z,1520497129.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:49.640Z,1520497129.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:50.040Z,1520497130.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:50.441Z,1520497130.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:50.826Z,1520497130.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:51.234Z,1520497131.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:51.633Z,1520497131.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:52.035Z,1520497132.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:52.438Z,1520497132.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:52.847Z,1520497132.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:53.240Z,1520497133.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:53.639Z,1520497133.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:54.036Z,1520497134.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:57.292Z,1520497137.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:57.426Z,1520497137.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:57.823Z,1520497137.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:58.200Z,1520497138.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:58.600Z,1520497138.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:58.992Z,1520497138.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:59.390Z,1520497139.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:18:59.802Z,1520497139.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:00.194Z,1520497140.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:00.600Z,1520497140.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:01.023Z,1520497141.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:01.402Z,1520497141.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:01.785Z,1520497141.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:02.190Z,1520497142.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:02.592Z,1520497142.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:02.994Z,1520497142.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:03.400Z,1520497143.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:03.800Z,1520497143.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:04.199Z,1520497144.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:04.592Z,1520497144.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:04.993Z,1520497144.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:05.400Z,1520497145.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:05.800Z,1520497145.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:06.210Z,1520497146.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:06.587Z,1520497146.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:06.992Z,1520497146.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:07.398Z,1520497147.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:07.804Z,1520497147.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:08.210Z,1520497148.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:08.610Z,1520497148.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:08.998Z,1520497148.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:09.394Z,1520497149.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:09.793Z,1520497149.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:10.191Z,1520497150.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:10.601Z,1520497150.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:11.005Z,1520497151.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:11.405Z,1520497151.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:11.803Z,1520497151.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:12.199Z,1520497152.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:12.593Z,1520497152.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:12.997Z,1520497152.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:13.409Z,1520497153.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:13.801Z,1520497153.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:14.205Z,1520497154.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:14.595Z,1520497154.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:14.991Z,1520497154.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:15.401Z,1520497155.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:15.810Z,1520497155.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:16.206Z,1520497156.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:16.591Z,1520497156.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:17.002Z,1520497157.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:17.405Z,1520497157.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:17.806Z,1520497157.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:18.209Z,1520497158.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:18.601Z,1520497158.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:18.994Z,1520497158.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:19.410Z,1520497159.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:19.806Z,1520497159.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:20.207Z,1520497160.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:20.599Z,1520497160.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:21.003Z,1520497161.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:21.406Z,1520497161.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:21.815Z,1520497161.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:22.209Z,1520497162.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:22.613Z,1520497162.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:22.983Z,1520497162.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:23.408Z,1520497163.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:23.807Z,1520497163.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:24.211Z,1520497164.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:24.589Z,1520497164.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:24.990Z,1520497164.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:25.421Z,1520497165.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:25.818Z,1520497165.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:26.223Z,1520497166.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:26.592Z,1520497166.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:26.991Z,1520497166.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:27.421Z,1520497167.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:27.796Z,1520497167.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:28.219Z,1520497168.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:28.593Z,1520497168.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:28.990Z,1520497168.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:29.419Z,1520497169.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:29.821Z,1520497169.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:30.219Z,1520497170.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:30.596Z,1520497170.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:30.991Z,1520497170.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:31.420Z,1520497171.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:31.818Z,1520497171.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:32.193Z,1520497172.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:32.598Z,1520497172.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:32.992Z,1520497172.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:33.398Z,1520497173.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:33.792Z,1520497173.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:34.219Z,1520497174.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:34.620Z,1520497174.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:34.991Z,1520497174.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:35.393Z,1520497175.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:35.792Z,1520497175.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:36.191Z,1520497176.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:36.619Z,1520497176.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:36.996Z,1520497176.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:37.419Z,1520497177.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:37.789Z,1520497177.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:38.191Z,1520497178.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:38.592Z,1520497178.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:38.992Z,1520497178.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:39.419Z,1520497179.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:39.820Z,1520497179.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:40.198Z,1520497180.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:40.621Z,1520497180.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:40.991Z,1520497180.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:41.418Z,1520497181.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:41.796Z,1520497181.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:42.219Z,1520497182.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:42.592Z,1520497182.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:42.992Z,1520497182.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:43.420Z,1520497183.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:43.816Z,1520497183.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:44.196Z,1520497184.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:44.591Z,1520497184.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:44.992Z,1520497184.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:45.392Z,1520497185.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:45.821Z,1520497185.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:46.202Z,1520497186.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:46.599Z,1520497186.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:46.994Z,1520497186.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:47.397Z,1520497187.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:47.802Z,1520497187.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:48.197Z,1520497188.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:48.595Z,1520497188.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:48.994Z,1520497188.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:49.396Z,1520497189.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:49.796Z,1520497189.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:50.202Z,1520497190.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:50.594Z,1520497190.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:50.991Z,1520497190.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:51.426Z,1520497191.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:51.796Z,1520497191.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:52.237Z,1520497192.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:52.611Z,1520497192.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:52.000Z,1520497193.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:53.407Z,1520497193.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:53.810Z,1520497193.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:54.206Z,1520497194.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:57.321Z,1520497197.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:57.454Z,1520497197.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:57.852Z,1520497197.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:58.250Z,1520497198.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:58.651Z,1520497198.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:59.021Z,1520497199.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:59.422Z,1520497199.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:19:59.823Z,1520497199.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:00.223Z,1520497200.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:00.631Z,1520497200.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:01.078Z,1520497201.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:01.430Z,1520497201.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:01.820Z,1520497201.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:02.223Z,1520497202.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:02.625Z,1520497202.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:03.022Z,1520497203.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:03.425Z,1520497203.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:03.827Z,1520497203.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:04.224Z,1520497204.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:04.622Z,1520497204.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:05.022Z,1520497205.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:05.431Z,1520497205.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:05.834Z,1520497205.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:06.234Z,1520497206.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:06.620Z,1520497206.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:07.025Z,1520497207.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:07.417Z,1520497207.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:07.839Z,1520497207.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:08.232Z,1520497208.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:08.635Z,1520497208.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:09.017Z,1520497209.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:09.423Z,1520497209.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:09.824Z,1520497209.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:10.224Z,1520497210.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:10.639Z,1520497210.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:11.029Z,1520497211.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:11.433Z,1520497211.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:11.822Z,1520497211.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:12.217Z,1520497212.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:12.621Z,1520497212.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:13.025Z,1520497213.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:13.421Z,1520497213.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:13.834Z,1520497213.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:14.232Z,1520497214.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:14.633Z,1520497214.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:15.030Z,1520497215.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:15.425Z,1520497215.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:15.824Z,1520497215.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:16.222Z,1520497216.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:16.635Z,1520497216.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:17.036Z,1520497217.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:17.426Z,1520497217.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:17.823Z,1520497217.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:18.227Z,1520497218.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:18.626Z,1520497218.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:19.024Z,1520497219.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:19.422Z,1520497219.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:19.827Z,1520497219.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:20.232Z,1520497220.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:20.633Z,1520497220.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:21.023Z,1520497221.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:21.426Z,1520497221.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:21.823Z,1520497221.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:22.224Z,1520497222.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:22.634Z,1520497222.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:23.035Z,1520497223.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:23.435Z,1520497223.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:23.822Z,1520497223.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:24.222Z,1520497224.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:24.626Z,1520497224.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:25.021Z,1520497225.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:25.429Z,1520497225.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:25.834Z,1520497225.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:26.242Z,1520497226.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:26.633Z,1520497226.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:27.023Z,1520497227.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:27.426Z,1520497227.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:27.822Z,1520497227.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:28.223Z,1520497228.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:28.634Z,1520497228.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:29.035Z,1520497229.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:29.435Z,1520497229.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:29.822Z,1520497229.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:30.222Z,1520497230.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:30.623Z,1520497230.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:31.025Z,1520497231.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:31.434Z,1520497231.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:31.826Z,1520497231.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:32.236Z,1520497232.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:32.622Z,1520497232.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:33.024Z,1520497233.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:33.426Z,1520497233.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:33.833Z,1520497233.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:34.235Z,1520497234.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:34.632Z,1520497234.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:35.027Z,1520497235.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:35.419Z,1520497235.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:35.825Z,1520497235.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:36.222Z,1520497236.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:36.625Z,1520497236.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:37.033Z,1520497237.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:37.437Z,1520497237.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:37.824Z,1520497237.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:38.220Z,1520497238.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:38.622Z,1520497238.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:39.027Z,1520497239.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:39.427Z,1520497239.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:39.833Z,1520497239.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:40.240Z,1520497240.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:40.636Z,1520497240.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:41.022Z,1520497241.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:41.417Z,1520497241.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:41.827Z,1520497241.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:42.227Z,1520497242.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:42.632Z,1520497242.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:43.033Z,1520497243.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:43.433Z,1520497243.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:43.829Z,1520497243.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:44.226Z,1520497244.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:44.631Z,1520497244.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:45.026Z,1520497245.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:45.431Z,1520497245.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:45.839Z,1520497245.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:46.241Z,1520497246.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:46.643Z,1520497246.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:47.039Z,1520497247.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:47.415Z,1520497247.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:47.820Z,1520497247.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:48.219Z,1520497248.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:48.617Z,1520497248.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:49.043Z,1520497249.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:49.447Z,1520497249.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:49.815Z,1520497249.815 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:49.815Z,1520497249.815 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13
2018-03-08T08:20:49.815Z,1520497249.815 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T08:20:49.821Z,1520497249.821 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:49.821Z,1520497249.821 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-03-08T08:20:49.821Z,1520497249.821 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T08:20:49.823Z,1520497249.823 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:49.823Z,1520497249.823 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-03-08T08:20:49.823Z,1520497249.823 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T08:20:49.852Z,1520497249.852 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T08:20:49.861Z,1520497249.861 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T08:20:49.861Z,1520497249.861 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T08:20:50.229Z,1520497250.229 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T08:20:50.229Z,1520497250.229 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13
2018-03-08T08:20:50.229Z,1520497250.229 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T08:20:50.230Z,1520497250.230 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-03-08T08:20:50.230Z,1520497250.230 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T08:20:50.230Z,1520497250.230 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-03-08T08:20:50.625Z,1520497250.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T08:20:50.625Z,1520497250.625 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:20:50.626Z,1520497250.626 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:20:50.626Z,1520497250.626 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T08:20:50.626Z,1520497250.626 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:20:50.627Z,1520497250.627 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:20:50.627Z,1520497250.627 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T08:20:50.627Z,1520497250.627 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:20:50.628Z,1520497250.628 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:20:51.016Z,1520497251.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T08:20:51.017Z,1520497251.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:51.418Z,1520497251.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T08:20:51.419Z,1520497251.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:51.824Z,1520497251.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T08:20:51.825Z,1520497251.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:52.229Z,1520497252.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T08:20:52.230Z,1520497252.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:52.624Z,1520497252.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T08:20:52.625Z,1520497252.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:53.021Z,1520497253.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T08:20:53.022Z,1520497253.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:53.416Z,1520497253.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T08:20:53.417Z,1520497253.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:53.822Z,1520497253.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T08:20:53.823Z,1520497253.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:54.222Z,1520497254.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T08:20:54.223Z,1520497254.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:57.324Z,1520497257.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-03-08T08:20:57.325Z,1520497257.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:57.478Z,1520497257.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-08T08:20:57.479Z,1520497257.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:57.832Z,1520497257.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T08:20:57.833Z,1520497257.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:58.221Z,1520497258.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T08:20:58.222Z,1520497258.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:58.621Z,1520497258.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T08:20:58.622Z,1520497258.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:59.016Z,1520497259.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T08:20:59.017Z,1520497259.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:59.425Z,1520497259.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T08:20:59.426Z,1520497259.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:20:59.834Z,1520497259.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T08:20:59.835Z,1520497259.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:00.232Z,1520497260.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T08:21:00.233Z,1520497260.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:00.618Z,1520497260.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T08:21:00.619Z,1520497260.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:01.021Z,1520497261.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T08:21:01.022Z,1520497261.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:01.434Z,1520497261.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T08:21:01.435Z,1520497261.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:01.820Z,1520497261.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T08:21:01.821Z,1520497261.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:02.224Z,1520497262.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T08:21:02.225Z,1520497262.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:02.622Z,1520497262.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T08:21:02.623Z,1520497262.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:03.019Z,1520497263.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T08:21:03.020Z,1520497263.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:03.424Z,1520497263.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T08:21:03.425Z,1520497263.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:03.832Z,1520497263.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T08:21:03.833Z,1520497263.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:04.238Z,1520497264.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T08:21:04.239Z,1520497264.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:04.618Z,1520497264.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T08:21:04.619Z,1520497264.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:05.027Z,1520497265.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T08:21:05.028Z,1520497265.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:05.425Z,1520497265.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T08:21:05.425Z,1520497265.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:05.838Z,1520497265.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T08:21:05.839Z,1520497265.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:06.232Z,1520497266.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T08:21:06.233Z,1520497266.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:06.618Z,1520497266.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T08:21:06.619Z,1520497266.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:07.021Z,1520497267.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T08:21:07.022Z,1520497267.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:07.431Z,1520497267.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T08:21:07.444Z,1520497267.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:07.834Z,1520497267.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T08:21:07.835Z,1520497267.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:08.236Z,1520497268.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T08:21:08.237Z,1520497268.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:08.634Z,1520497268.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T08:21:08.635Z,1520497268.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:09.030Z,1520497269.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T08:21:09.031Z,1520497269.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:09.436Z,1520497269.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T08:21:09.437Z,1520497269.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:09.846Z,1520497269.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:10.236Z,1520497270.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:10.615Z,1520497270.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:11.018Z,1520497271.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:11.424Z,1520497271.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:11.845Z,1520497271.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:12.221Z,1520497272.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:12.617Z,1520497272.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:13.013Z,1520497273.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:13.421Z,1520497273.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:13.822Z,1520497273.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:14.250Z,1520497274.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:14.616Z,1520497274.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:15.010Z,1520497275.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:15.416Z,1520497275.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:15.828Z,1520497275.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:16.224Z,1520497276.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:16.617Z,1520497276.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:17.018Z,1520497277.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:17.424Z,1520497277.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:17.820Z,1520497277.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:18.225Z,1520497278.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:18.618Z,1520497278.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:19.018Z,1520497279.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:19.425Z,1520497279.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:19.824Z,1520497279.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:20.220Z,1520497280.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:20.617Z,1520497280.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:21.018Z,1520497281.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:21.427Z,1520497281.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:21.825Z,1520497281.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:22.225Z,1520497282.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:22.622Z,1520497282.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:23.018Z,1520497283.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:23.421Z,1520497283.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:23.825Z,1520497283.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:24.231Z,1520497284.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:24.618Z,1520497284.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:25.014Z,1520497285.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:25.423Z,1520497285.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:25.823Z,1520497285.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:26.225Z,1520497286.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:26.619Z,1520497286.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:27.015Z,1520497287.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:27.423Z,1520497287.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:27.823Z,1520497287.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:28.225Z,1520497288.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:28.614Z,1520497288.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:29.022Z,1520497289.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:29.423Z,1520497289.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:29.824Z,1520497289.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:30.230Z,1520497290.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:30.618Z,1520497290.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:31.026Z,1520497291.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:31.424Z,1520497291.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:31.831Z,1520497291.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:32.223Z,1520497292.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:32.620Z,1520497292.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:33.019Z,1520497293.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:33.431Z,1520497293.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:33.824Z,1520497293.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:34.251Z,1520497294.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:34.623Z,1520497294.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:35.018Z,1520497295.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:35.426Z,1520497295.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:35.831Z,1520497295.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:36.245Z,1520497296.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:36.612Z,1520497296.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:37.011Z,1520497297.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:37.435Z,1520497297.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:37.833Z,1520497297.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:38.236Z,1520497298.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:38.614Z,1520497298.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:39.014Z,1520497299.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:39.436Z,1520497299.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:39.838Z,1520497299.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:40.232Z,1520497300.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:40.245Z,1520497300.245 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T08:21:40.610Z,1520497300.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:41.006Z,1520497301.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:41.436Z,1520497301.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:41.830Z,1520497301.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:42.242Z,1520497302.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:42.609Z,1520497302.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:43.013Z,1520497303.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:43.435Z,1520497303.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:43.834Z,1520497303.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:44.233Z,1520497304.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:44.611Z,1520497304.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:45.038Z,1520497305.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:45.433Z,1520497305.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:45.832Z,1520497305.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:46.232Z,1520497306.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:46.612Z,1520497306.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:47.013Z,1520497307.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:47.441Z,1520497307.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:47.850Z,1520497307.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:48.241Z,1520497308.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:48.650Z,1520497308.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:49.019Z,1520497309.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:49.455Z,1520497309.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:49.836Z,1520497309.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:50.227Z,1520497310.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:50.619Z,1520497310.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:51.042Z,1520497311.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:51.431Z,1520497311.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:51.847Z,1520497311.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:52.246Z,1520497312.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:52.624Z,1520497312.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:53.017Z,1520497313.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:53.417Z,1520497313.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:53.420Z,1520497313.420 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T08:21:53.421Z,1520497313.421 [Default:CheckIn:C.Wait] Stopped
2018-03-08T08:21:53.421Z,1520497313.421 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T08:21:53.421Z,1520497313.421 [Default:CheckIn:D] Running Loop=1
2018-03-08T08:21:53.821Z,1520497313.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:53.824Z,1520497313.824 [Default:CheckIn:D] Stopped
2018-03-08T08:21:53.824Z,1520497313.824 [Default:CheckIn:E] Running Loop=1
2018-03-08T08:21:54.228Z,1520497314.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:54.254Z,1520497314.254 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 36.150309 min 
2018-03-08T08:21:54.254Z,1520497314.254 [Default:CheckIn:E] Stopped
2018-03-08T08:21:54.255Z,1520497314.255 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T08:21:54.255Z,1520497314.255 [Default:CheckIn] Stopped
2018-03-08T08:21:54.255Z,1520497314.255 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T08:21:54.255Z,1520497314.255 [Default:CheckIn](INFO): Running loop #4
2018-03-08T08:21:54.255Z,1520497314.255 [Default:CheckIn] Running Loop=4
2018-03-08T08:21:54.255Z,1520497314.255 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T08:21:54.255Z,1520497314.255 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T08:21:54.617Z,1520497314.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:57.752Z,1520497317.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:57.896Z,1520497317.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:58.251Z,1520497318.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:58.654Z,1520497318.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:59.026Z,1520497319.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:59.426Z,1520497319.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:21:59.820Z,1520497319.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:00.219Z,1520497320.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:00.632Z,1520497320.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:01.027Z,1520497321.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:01.483Z,1520497321.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:01.820Z,1520497321.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:02.219Z,1520497322.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:02.635Z,1520497322.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:03.023Z,1520497323.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:03.431Z,1520497323.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:03.820Z,1520497323.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:04.236Z,1520497324.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:04.619Z,1520497324.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:05.034Z,1520497325.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:05.428Z,1520497325.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:05.831Z,1520497325.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:06.235Z,1520497326.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:06.636Z,1520497326.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:07.030Z,1520497327.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:07.431Z,1520497327.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:07.837Z,1520497327.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:08.237Z,1520497328.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:08.628Z,1520497328.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:09.033Z,1520497329.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:09.440Z,1520497329.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:09.839Z,1520497329.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:10.240Z,1520497330.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:10.634Z,1520497330.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:11.012Z,1520497331.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:11.442Z,1520497331.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:11.839Z,1520497331.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:12.234Z,1520497332.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:12.637Z,1520497332.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:13.038Z,1520497333.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:13.439Z,1520497333.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:13.841Z,1520497333.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:14.246Z,1520497334.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:14.616Z,1520497334.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:15.019Z,1520497335.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:15.445Z,1520497335.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:15.841Z,1520497335.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:16.240Z,1520497336.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:16.621Z,1520497336.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:17.021Z,1520497337.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:17.441Z,1520497337.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:17.866Z,1520497337.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:18.241Z,1520497338.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:18.622Z,1520497338.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:19.022Z,1520497339.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:19.425Z,1520497339.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:19.847Z,1520497339.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:20.240Z,1520497340.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:20.620Z,1520497340.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:21.024Z,1520497341.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:21.452Z,1520497341.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:21.849Z,1520497341.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:22.253Z,1520497342.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:22.623Z,1520497342.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:23.023Z,1520497343.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:23.425Z,1520497343.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:23.836Z,1520497343.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:24.265Z,1520497344.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:24.623Z,1520497344.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:25.024Z,1520497345.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:25.418Z,1520497345.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:25.828Z,1520497345.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:26.223Z,1520497346.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:26.636Z,1520497346.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:27.032Z,1520497347.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:27.432Z,1520497347.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:27.827Z,1520497347.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:28.226Z,1520497348.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:28.626Z,1520497348.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:29.026Z,1520497349.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:29.429Z,1520497349.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:29.829Z,1520497349.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:30.229Z,1520497350.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:30.634Z,1520497350.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:31.027Z,1520497351.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:31.435Z,1520497351.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:31.829Z,1520497351.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:32.233Z,1520497352.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:32.624Z,1520497352.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:33.027Z,1520497353.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:33.429Z,1520497353.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:33.838Z,1520497353.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:34.232Z,1520497354.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:34.629Z,1520497354.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:35.026Z,1520497355.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:35.432Z,1520497355.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:35.833Z,1520497355.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:36.232Z,1520497356.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:36.626Z,1520497356.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:37.022Z,1520497357.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:37.437Z,1520497357.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:37.835Z,1520497357.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:38.236Z,1520497358.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:38.625Z,1520497358.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:39.023Z,1520497359.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:39.442Z,1520497359.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:39.835Z,1520497359.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:40.242Z,1520497360.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:40.626Z,1520497360.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:41.026Z,1520497361.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:41.432Z,1520497361.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:41.835Z,1520497361.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:42.236Z,1520497362.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:42.625Z,1520497362.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:43.023Z,1520497363.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:43.435Z,1520497363.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:43.835Z,1520497363.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:44.237Z,1520497364.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:44.630Z,1520497364.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:45.026Z,1520497365.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:45.432Z,1520497365.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:45.832Z,1520497365.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:46.242Z,1520497366.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:46.627Z,1520497366.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:47.027Z,1520497367.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:47.432Z,1520497367.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:47.835Z,1520497367.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:48.235Z,1520497368.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:48.625Z,1520497368.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:49.030Z,1520497369.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:49.436Z,1520497369.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:49.835Z,1520497369.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:50.263Z,1520497370.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:50.623Z,1520497370.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:51.027Z,1520497371.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:51.433Z,1520497371.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:51.837Z,1520497371.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:52.242Z,1520497372.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:52.620Z,1520497372.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:53.027Z,1520497373.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:53.432Z,1520497373.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:53.836Z,1520497373.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:54.235Z,1520497374.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:54.625Z,1520497374.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:57.734Z,1520497377.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:57.890Z,1520497377.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:58.248Z,1520497378.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:58.647Z,1520497378.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:59.035Z,1520497379.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:59.430Z,1520497379.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:22:59.834Z,1520497379.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:00.234Z,1520497380.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:00.640Z,1520497380.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:01.039Z,1520497381.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:01.446Z,1520497381.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:01.835Z,1520497381.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:02.230Z,1520497382.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:02.635Z,1520497382.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:03.034Z,1520497383.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:03.440Z,1520497383.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:03.840Z,1520497383.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:04.239Z,1520497384.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:04.638Z,1520497384.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:05.034Z,1520497385.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:05.446Z,1520497385.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:05.843Z,1520497385.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:06.244Z,1520497386.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:06.633Z,1520497386.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:07.034Z,1520497387.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:07.444Z,1520497387.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:07.850Z,1520497387.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:08.244Z,1520497388.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:08.638Z,1520497388.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:09.032Z,1520497389.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:09.447Z,1520497389.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:09.850Z,1520497389.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:10.245Z,1520497390.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:10.636Z,1520497390.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:11.039Z,1520497391.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:11.447Z,1520497391.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:11.845Z,1520497391.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:12.245Z,1520497392.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:12.633Z,1520497392.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:13.036Z,1520497393.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:13.446Z,1520497393.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:13.850Z,1520497393.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:14.244Z,1520497394.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:14.642Z,1520497394.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:15.032Z,1520497395.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:15.450Z,1520497395.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:15.837Z,1520497395.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:16.250Z,1520497396.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:16.635Z,1520497396.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:17.035Z,1520497397.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:17.440Z,1520497397.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:17.843Z,1520497397.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:18.243Z,1520497398.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:18.635Z,1520497398.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:19.037Z,1520497399.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:19.440Z,1520497399.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:19.844Z,1520497399.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:20.244Z,1520497400.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:20.639Z,1520497400.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:21.026Z,1520497401.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:21.436Z,1520497401.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:21.855Z,1520497401.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:22.251Z,1520497402.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:22.628Z,1520497402.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:23.023Z,1520497403.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:23.452Z,1520497403.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:23.848Z,1520497403.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:24.252Z,1520497404.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:24.628Z,1520497404.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:25.026Z,1520497405.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:25.436Z,1520497405.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:25.863Z,1520497405.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:26.261Z,1520497406.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:26.673Z,1520497406.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:27.068Z,1520497407.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:27.467Z,1520497407.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:27.839Z,1520497407.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:28.239Z,1520497408.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:28.635Z,1520497408.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:29.038Z,1520497409.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:29.467Z,1520497409.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:29.840Z,1520497409.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:30.237Z,1520497410.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:30.634Z,1520497410.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:31.026Z,1520497411.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:31.447Z,1520497411.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:31.840Z,1520497411.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:32.250Z,1520497412.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:32.636Z,1520497412.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:33.032Z,1520497413.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:33.446Z,1520497413.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:33.842Z,1520497413.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:34.240Z,1520497414.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:34.636Z,1520497414.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:35.035Z,1520497415.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:35.440Z,1520497415.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:35.839Z,1520497415.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:36.240Z,1520497416.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:36.630Z,1520497416.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:37.037Z,1520497417.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:37.439Z,1520497417.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:37.839Z,1520497417.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:38.239Z,1520497418.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:38.642Z,1520497418.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:39.034Z,1520497419.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:39.440Z,1520497419.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:39.840Z,1520497419.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:40.239Z,1520497420.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:40.635Z,1520497420.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:41.042Z,1520497421.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:41.447Z,1520497421.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:41.846Z,1520497421.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:42.246Z,1520497422.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:42.644Z,1520497422.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:43.042Z,1520497423.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:43.439Z,1520497423.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:43.855Z,1520497423.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:44.250Z,1520497424.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:44.636Z,1520497424.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:45.039Z,1520497425.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:45.462Z,1520497425.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:45.855Z,1520497425.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:46.243Z,1520497426.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:46.645Z,1520497426.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:47.042Z,1520497427.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:47.451Z,1520497427.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:47.849Z,1520497427.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:48.245Z,1520497428.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:48.641Z,1520497428.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:49.043Z,1520497429.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:49.440Z,1520497429.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:49.845Z,1520497429.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:50.249Z,1520497430.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:50.640Z,1520497430.640 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:50.640Z,1520497430.640 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14
2018-03-08T08:23:50.640Z,1520497430.640 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T08:23:50.646Z,1520497430.646 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:50.646Z,1520497430.646 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-03-08T08:23:50.646Z,1520497430.646 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T08:23:50.648Z,1520497430.648 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:50.648Z,1520497430.648 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-03-08T08:23:50.648Z,1520497430.648 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T08:23:50.677Z,1520497430.677 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T08:23:50.677Z,1520497430.677 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T08:23:50.677Z,1520497430.677 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T08:23:51.057Z,1520497431.057 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T08:23:51.057Z,1520497431.057 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14
2018-03-08T08:23:51.057Z,1520497431.057 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T08:23:51.058Z,1520497431.058 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-03-08T08:23:51.058Z,1520497431.058 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T08:23:51.058Z,1520497431.058 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-03-08T08:23:51.454Z,1520497431.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T08:23:51.454Z,1520497431.454 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:23:51.454Z,1520497431.454 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:23:51.455Z,1520497431.455 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T08:23:51.455Z,1520497431.455 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:23:51.456Z,1520497431.456 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:23:51.456Z,1520497431.456 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T08:23:51.456Z,1520497431.456 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:23:51.457Z,1520497431.457 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:23:51.836Z,1520497431.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T08:23:51.845Z,1520497431.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:52.258Z,1520497432.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T08:23:52.259Z,1520497432.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:52.627Z,1520497432.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T08:23:52.628Z,1520497432.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:53.025Z,1520497433.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T08:23:53.026Z,1520497433.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:53.437Z,1520497433.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T08:23:53.438Z,1520497433.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:53.859Z,1520497433.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T08:23:53.860Z,1520497433.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:54.257Z,1520497434.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T08:23:54.258Z,1520497434.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:54.642Z,1520497434.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T08:23:54.643Z,1520497434.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:58.016Z,1520497438.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2018-03-08T08:23:58.017Z,1520497438.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:58.166Z,1520497438.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-03-08T08:23:58.167Z,1520497438.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:58.511Z,1520497438.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2018-03-08T08:23:58.512Z,1520497438.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:58.915Z,1520497438.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-03-08T08:23:58.916Z,1520497438.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:59.289Z,1520497439.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2018-03-08T08:23:59.290Z,1520497439.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:23:59.688Z,1520497439.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2018-03-08T08:23:59.689Z,1520497439.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:00.086Z,1520497440.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2018-03-08T08:24:00.087Z,1520497440.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:00.495Z,1520497440.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-03-08T08:24:00.496Z,1520497440.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:00.900Z,1520497440.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-03-08T08:24:00.921Z,1520497440.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:01.294Z,1520497441.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-03-08T08:24:01.295Z,1520497441.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:01.680Z,1520497441.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2018-03-08T08:24:01.681Z,1520497441.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:02.085Z,1520497442.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2018-03-08T08:24:02.086Z,1520497442.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:02.489Z,1520497442.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2018-03-08T08:24:02.490Z,1520497442.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:02.889Z,1520497442.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2018-03-08T08:24:02.890Z,1520497442.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:03.289Z,1520497443.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2018-03-08T08:24:03.290Z,1520497443.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:03.691Z,1520497443.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2018-03-08T08:24:03.693Z,1520497443.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:04.096Z,1520497444.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2018-03-08T08:24:04.097Z,1520497444.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:04.493Z,1520497444.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2018-03-08T08:24:04.494Z,1520497444.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:04.888Z,1520497444.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2018-03-08T08:24:04.889Z,1520497444.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:05.285Z,1520497445.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2018-03-08T08:24:05.286Z,1520497445.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:05.685Z,1520497445.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2018-03-08T08:24:05.686Z,1520497445.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:06.090Z,1520497446.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2018-03-08T08:24:06.091Z,1520497446.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:06.507Z,1520497446.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2018-03-08T08:24:06.508Z,1520497446.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:06.898Z,1520497446.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2018-03-08T08:24:06.899Z,1520497446.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:07.300Z,1520497447.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2018-03-08T08:24:07.301Z,1520497447.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:07.689Z,1520497447.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-03-08T08:24:07.690Z,1520497447.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:08.089Z,1520497448.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-03-08T08:24:08.090Z,1520497448.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:08.490Z,1520497448.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-03-08T08:24:08.490Z,1520497448.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:08.894Z,1520497448.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-03-08T08:24:08.895Z,1520497448.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:09.290Z,1520497449.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-03-08T08:24:09.291Z,1520497449.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:09.706Z,1520497449.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-03-08T08:24:09.707Z,1520497449.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:10.096Z,1520497450.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-03-08T08:24:10.097Z,1520497450.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:10.502Z,1520497450.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-03-08T08:24:10.503Z,1520497450.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:10.890Z,1520497450.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:11.293Z,1520497451.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:11.690Z,1520497451.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:12.091Z,1520497452.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:12.502Z,1520497452.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:12.906Z,1520497452.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:13.300Z,1520497453.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:13.688Z,1520497453.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:14.094Z,1520497454.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:14.490Z,1520497454.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:14.899Z,1520497454.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:15.295Z,1520497455.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:15.706Z,1520497455.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:16.109Z,1520497456.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:16.506Z,1520497456.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:16.892Z,1520497456.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:17.294Z,1520497457.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:17.692Z,1520497457.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:18.089Z,1520497458.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:18.501Z,1520497458.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:18.904Z,1520497458.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:19.301Z,1520497459.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:19.691Z,1520497459.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:20.094Z,1520497460.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:20.489Z,1520497460.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:20.891Z,1520497460.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:21.287Z,1520497461.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:21.701Z,1520497461.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:22.103Z,1520497462.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:22.499Z,1520497462.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:22.890Z,1520497462.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:23.289Z,1520497463.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:23.693Z,1520497463.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:24.090Z,1520497464.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:24.500Z,1520497464.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:24.900Z,1520497464.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:25.300Z,1520497465.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:25.693Z,1520497465.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:26.093Z,1520497466.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:26.493Z,1520497466.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:26.890Z,1520497466.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:27.294Z,1520497467.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:27.701Z,1520497467.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:28.096Z,1520497468.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:28.496Z,1520497468.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:28.890Z,1520497468.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:29.294Z,1520497469.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:29.699Z,1520497469.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:30.092Z,1520497470.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:30.500Z,1520497470.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:30.904Z,1520497470.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:31.301Z,1520497471.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:31.689Z,1520497471.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:32.094Z,1520497472.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:32.489Z,1520497472.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:32.894Z,1520497472.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:33.294Z,1520497473.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:33.699Z,1520497473.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:34.105Z,1520497474.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:34.503Z,1520497474.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:34.898Z,1520497474.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:35.272Z,1520497475.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:35.679Z,1520497475.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:36.094Z,1520497476.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:36.444Z,1520497476.444 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T08:24:36.444Z,1520497476.444 [NAL9602] Data Fault, FailCount= 5
2018-03-08T08:24:36.444Z,1520497476.444 [NAL9602](ERROR): Data Fault
2018-03-08T08:24:36.503Z,1520497476.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:36.533Z,1520497476.533 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T08:24:36.534Z,1520497476.534 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-08T08:24:36.850Z,1520497476.850 [NAL9602](INFO): Powering down
2018-03-08T08:24:36.897Z,1520497476.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:36.921Z,1520497476.921 [CBIT](INFO): Critical error at 20180308T082436
2018-03-08T08:24:37.294Z,1520497477.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:37.690Z,1520497477.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:38.085Z,1520497478.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:38.489Z,1520497478.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:38.883Z,1520497478.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:39.284Z,1520497479.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:39.690Z,1520497479.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:40.088Z,1520497480.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:40.484Z,1520497480.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:40.890Z,1520497480.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:41.282Z,1520497481.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:41.685Z,1520497481.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:42.085Z,1520497482.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:42.489Z,1520497482.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:42.884Z,1520497482.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:43.289Z,1520497483.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:43.683Z,1520497483.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:44.084Z,1520497484.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:44.484Z,1520497484.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:44.884Z,1520497484.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:45.284Z,1520497485.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:45.690Z,1520497485.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:46.082Z,1520497486.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:46.485Z,1520497486.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:46.889Z,1520497486.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:47.284Z,1520497487.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:47.684Z,1520497487.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:48.089Z,1520497488.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:48.485Z,1520497488.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:48.884Z,1520497488.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:49.289Z,1520497489.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:49.684Z,1520497489.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:50.084Z,1520497490.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:50.490Z,1520497490.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:50.889Z,1520497490.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:51.287Z,1520497491.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:51.689Z,1520497491.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:52.081Z,1520497492.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:52.485Z,1520497492.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:52.889Z,1520497492.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:53.286Z,1520497493.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:53.692Z,1520497493.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:54.094Z,1520497494.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:54.490Z,1520497494.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:54.888Z,1520497494.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:57.987Z,1520497497.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:58.123Z,1520497498.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:58.474Z,1520497498.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:58.850Z,1520497498.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:59.253Z,1520497499.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:24:59.656Z,1520497499.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:00.078Z,1520497500.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:00.450Z,1520497500.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:00.877Z,1520497500.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:01.249Z,1520497501.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:01.673Z,1520497501.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:02.052Z,1520497502.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:02.449Z,1520497502.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:02.854Z,1520497502.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:03.252Z,1520497503.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:03.647Z,1520497503.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:04.050Z,1520497504.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:04.456Z,1520497504.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:04.845Z,1520497504.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:05.257Z,1520497505.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:05.657Z,1520497505.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:06.050Z,1520497506.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:06.457Z,1520497506.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:06.856Z,1520497506.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:07.249Z,1520497507.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:07.651Z,1520497507.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:08.056Z,1520497508.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:08.456Z,1520497508.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:08.850Z,1520497508.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:09.250Z,1520497509.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:09.651Z,1520497509.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:10.057Z,1520497510.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:10.457Z,1520497510.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:10.849Z,1520497510.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:11.254Z,1520497511.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:11.653Z,1520497511.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:12.053Z,1520497512.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:12.475Z,1520497512.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:12.852Z,1520497512.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:13.246Z,1520497513.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:13.658Z,1520497513.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:14.056Z,1520497514.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:14.449Z,1520497514.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:14.859Z,1520497514.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:15.256Z,1520497515.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:15.649Z,1520497515.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:16.054Z,1520497516.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:16.482Z,1520497516.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:16.845Z,1520497516.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:17.258Z,1520497517.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:17.662Z,1520497517.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:18.050Z,1520497518.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:18.463Z,1520497518.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:18.862Z,1520497518.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:19.250Z,1520497519.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:19.662Z,1520497519.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:20.062Z,1520497520.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:20.457Z,1520497520.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:20.858Z,1520497520.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:21.258Z,1520497521.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:21.653Z,1520497521.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:22.057Z,1520497522.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:22.457Z,1520497522.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:22.853Z,1520497522.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:23.257Z,1520497523.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:23.654Z,1520497523.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:24.052Z,1520497524.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:24.457Z,1520497524.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:24.859Z,1520497524.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:25.253Z,1520497525.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:25.655Z,1520497525.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:26.062Z,1520497526.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:26.459Z,1520497526.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:26.860Z,1520497526.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:27.258Z,1520497527.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:27.659Z,1520497527.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:28.066Z,1520497528.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:28.458Z,1520497528.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:28.859Z,1520497528.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:29.254Z,1520497529.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:29.655Z,1520497529.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:30.059Z,1520497530.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:30.453Z,1520497530.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:30.859Z,1520497530.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:31.254Z,1520497531.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:31.687Z,1520497531.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:32.059Z,1520497532.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:32.459Z,1520497532.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:32.855Z,1520497532.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:33.259Z,1520497533.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:33.659Z,1520497533.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:34.055Z,1520497534.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:34.463Z,1520497534.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:34.857Z,1520497534.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:35.254Z,1520497535.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:35.658Z,1520497535.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:36.057Z,1520497536.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:36.455Z,1520497536.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:36.862Z,1520497536.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:37.258Z,1520497537.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:37.654Z,1520497537.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:38.066Z,1520497538.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:38.458Z,1520497538.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:38.854Z,1520497538.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:39.259Z,1520497539.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:39.657Z,1520497539.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:40.058Z,1520497540.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:40.459Z,1520497540.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:40.857Z,1520497540.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:41.262Z,1520497541.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:41.659Z,1520497541.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:42.061Z,1520497542.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:42.452Z,1520497542.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:42.875Z,1520497542.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:43.260Z,1520497543.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:43.659Z,1520497543.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:44.071Z,1520497544.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:44.462Z,1520497544.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:44.867Z,1520497544.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:45.271Z,1520497545.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:45.668Z,1520497545.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:46.069Z,1520497546.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:46.448Z,1520497546.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:46.849Z,1520497546.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:47.247Z,1520497547.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:47.673Z,1520497547.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:48.053Z,1520497548.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:48.457Z,1520497548.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:48.858Z,1520497548.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:49.253Z,1520497549.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:49.650Z,1520497549.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:50.062Z,1520497550.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:50.458Z,1520497550.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:50.856Z,1520497550.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:51.251Z,1520497551.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:51.650Z,1520497551.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:52.051Z,1520497552.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:52.579Z,1520497552.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:52.850Z,1520497552.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:53.243Z,1520497553.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:53.659Z,1520497553.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:54.050Z,1520497554.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:54.448Z,1520497554.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:54.858Z,1520497554.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:55.252Z,1520497555.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:58.581Z,1520497558.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:58.722Z,1520497558.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:59.072Z,1520497559.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:59.467Z,1520497559.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:25:59.877Z,1520497559.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:00.268Z,1520497560.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:00.666Z,1520497560.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:01.072Z,1520497561.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:01.468Z,1520497561.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:01.866Z,1520497561.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:02.273Z,1520497562.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:02.669Z,1520497562.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:03.064Z,1520497563.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:03.472Z,1520497563.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:03.868Z,1520497563.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:04.271Z,1520497564.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:04.673Z,1520497564.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:05.068Z,1520497565.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:05.465Z,1520497565.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:05.871Z,1520497565.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:06.268Z,1520497566.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:06.666Z,1520497566.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:07.072Z,1520497567.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:07.469Z,1520497567.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:07.869Z,1520497567.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:08.274Z,1520497568.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:08.673Z,1520497568.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:09.067Z,1520497569.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:09.471Z,1520497569.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:09.869Z,1520497569.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:10.272Z,1520497570.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:10.673Z,1520497570.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:11.069Z,1520497571.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:11.466Z,1520497571.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:11.873Z,1520497571.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:12.312Z,1520497572.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:12.683Z,1520497572.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:13.063Z,1520497573.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:13.472Z,1520497573.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:13.903Z,1520497573.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:14.285Z,1520497574.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:14.668Z,1520497574.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:15.066Z,1520497575.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:15.474Z,1520497575.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:15.868Z,1520497575.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:16.267Z,1520497576.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:16.673Z,1520497576.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:17.070Z,1520497577.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:17.468Z,1520497577.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:17.878Z,1520497577.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:18.271Z,1520497578.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:18.664Z,1520497578.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:19.075Z,1520497579.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:19.471Z,1520497579.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:19.875Z,1520497579.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:20.294Z,1520497580.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:20.670Z,1520497580.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:21.066Z,1520497581.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:21.468Z,1520497581.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:21.871Z,1520497581.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:22.269Z,1520497582.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:22.678Z,1520497582.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:23.070Z,1520497583.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:23.465Z,1520497583.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:23.871Z,1520497583.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:24.270Z,1520497584.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:24.670Z,1520497584.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:25.066Z,1520497585.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:25.466Z,1520497585.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:25.864Z,1520497585.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:26.269Z,1520497586.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:26.678Z,1520497586.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:27.071Z,1520497587.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:27.467Z,1520497587.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:27.874Z,1520497587.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:28.266Z,1520497588.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:28.671Z,1520497588.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:29.069Z,1520497589.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:29.471Z,1520497589.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:29.863Z,1520497589.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:30.270Z,1520497590.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:30.668Z,1520497590.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:31.067Z,1520497591.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:31.467Z,1520497591.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:31.870Z,1520497591.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:32.266Z,1520497592.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:32.678Z,1520497592.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:33.070Z,1520497593.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:33.464Z,1520497593.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:33.877Z,1520497593.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:34.272Z,1520497594.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:34.666Z,1520497594.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:35.073Z,1520497595.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:35.465Z,1520497595.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:35.862Z,1520497595.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:36.271Z,1520497596.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:36.664Z,1520497596.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:36.677Z,1520497596.677 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T08:26:36.677Z,1520497596.677 [NAL9602] No Fault, FailCount= 5
2018-03-08T08:26:37.026Z,1520497597.026 [NAL9602](INFO): Powering up NAL9602
2018-03-08T08:26:37.074Z,1520497597.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:37.478Z,1520497597.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:37.873Z,1520497597.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:38.273Z,1520497598.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:38.673Z,1520497598.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:39.069Z,1520497599.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:39.467Z,1520497599.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:39.834Z,1520497599.834 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-03-08T08:26:39.834Z,1520497599.834 [DropWeight] Hardware Fault, FailCount= 1
2018-03-08T08:26:39.834Z,1520497599.834 [DropWeight](ERROR): Hardware Fault
2018-03-08T08:26:39.895Z,1520497599.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:39.920Z,1520497599.920 [CBIT](INFO): Critical error at 20180308T082639
2018-03-08T08:26:39.927Z,1520497599.927 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-03-08T08:26:39.928Z,1520497599.928 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-03-08T08:26:40.269Z,1520497600.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:40.280Z,1520497600.280 [CBIT](INFO): Critical error at 20180308T082639
2018-03-08T08:26:40.669Z,1520497600.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:41.075Z,1520497601.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:41.471Z,1520497601.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:41.866Z,1520497601.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:42.272Z,1520497602.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:42.671Z,1520497602.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:43.067Z,1520497603.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:43.469Z,1520497603.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:43.869Z,1520497603.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:44.276Z,1520497604.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:44.672Z,1520497604.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:45.070Z,1520497605.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:45.479Z,1520497605.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:45.889Z,1520497605.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:46.279Z,1520497606.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:46.671Z,1520497606.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:47.075Z,1520497607.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:47.486Z,1520497607.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:47.834Z,1520497607.834 [NAL9602](INFO): NAL9602 initialized
2018-03-08T08:26:47.886Z,1520497607.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:48.277Z,1520497608.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:48.678Z,1520497608.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:49.086Z,1520497609.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:49.482Z,1520497609.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:49.879Z,1520497609.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:50.276Z,1520497610.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:50.679Z,1520497610.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:51.078Z,1520497611.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:51.479Z,1520497611.479 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:51.479Z,1520497611.479 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15
2018-03-08T08:26:51.479Z,1520497611.479 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T08:26:51.481Z,1520497611.481 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:51.481Z,1520497611.481 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-03-08T08:26:51.481Z,1520497611.481 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T08:26:51.483Z,1520497611.483 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:51.483Z,1520497611.483 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-03-08T08:26:51.483Z,1520497611.483 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T08:26:51.495Z,1520497611.495 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T08:26:51.496Z,1520497611.496 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T08:26:51.496Z,1520497611.496 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T08:26:51.903Z,1520497611.903 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T08:26:51.903Z,1520497611.903 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15
2018-03-08T08:26:51.904Z,1520497611.904 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T08:26:51.904Z,1520497611.904 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-03-08T08:26:51.904Z,1520497611.904 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T08:26:51.904Z,1520497611.904 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-03-08T08:26:52.287Z,1520497612.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T08:26:52.288Z,1520497612.288 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:26:52.288Z,1520497612.288 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:26:52.289Z,1520497612.289 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T08:26:52.289Z,1520497612.289 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:26:52.290Z,1520497612.290 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:26:52.290Z,1520497612.290 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T08:26:52.291Z,1520497612.291 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:26:52.291Z,1520497612.291 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:26:52.702Z,1520497612.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T08:26:52.702Z,1520497612.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:53.070Z,1520497613.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T08:26:53.071Z,1520497613.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:53.474Z,1520497613.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T08:26:53.475Z,1520497613.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:53.868Z,1520497613.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T08:26:53.869Z,1520497613.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:54.292Z,1520497614.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T08:26:54.293Z,1520497614.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:54.296Z,1520497614.296 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T08:21:54.3Z
2018-03-08T08:26:54.297Z,1520497614.297 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T08:26:54.297Z,1520497614.297 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T08:26:54.693Z,1520497614.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T08:26:54.694Z,1520497614.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:55.159Z,1520497615.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-08T08:26:55.160Z,1520497615.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:55.490Z,1520497615.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T08:26:55.491Z,1520497615.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:58.764Z,1520497618.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-08T08:26:58.765Z,1520497618.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:58.914Z,1520497618.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2018-03-08T08:26:58.915Z,1520497618.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:59.225Z,1520497619.225 [DataOverHttps](INFO): Sending 124 bytes from file Logs/20180308T074127/Courier0016.lzma
2018-03-08T08:26:59.290Z,1520497619.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2018-03-08T08:26:59.291Z,1520497619.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:26:59.666Z,1520497619.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2018-03-08T08:26:59.666Z,1520497619.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:00.023Z,1520497620.023 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0016.lzma.bak
2018-03-08T08:27:00.023Z,1520497620.023 [DataOverHttps](INFO): SBD MOMSN=7984099
2018-03-08T08:27:00.091Z,1520497620.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2018-03-08T08:27:00.092Z,1520497620.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:00.646Z,1520497620.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T08:27:00.647Z,1520497620.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:00.893Z,1520497620.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2018-03-08T08:27:00.894Z,1520497620.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:03.999Z,1520497623.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T08:27:03.000Z,1520497624.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:04.143Z,1520497624.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2018-03-08T08:27:04.144Z,1520497624.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:04.477Z,1520497624.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2018-03-08T08:27:04.478Z,1520497624.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:04.874Z,1520497624.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2018-03-08T08:27:04.874Z,1520497624.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:05.282Z,1520497625.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2018-03-08T08:27:05.283Z,1520497625.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:05.669Z,1520497625.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2018-03-08T08:27:05.670Z,1520497625.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:06.082Z,1520497626.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2018-03-08T08:27:06.083Z,1520497626.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:09.258Z,1520497629.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-03-08T08:27:09.259Z,1520497629.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:09.382Z,1520497629.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2018-03-08T08:27:09.383Z,1520497629.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:09.694Z,1520497629.694 [DataOverHttps](INFO): Sending 138 bytes from file Logs/20180308T074127/Express0017.lzma
2018-03-08T08:27:09.739Z,1520497629.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-03-08T08:27:09.740Z,1520497629.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:10.131Z,1520497630.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-03-08T08:27:10.133Z,1520497630.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:10.487Z,1520497630.487 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0017.lzma.bak
2018-03-08T08:27:10.487Z,1520497630.487 [DataOverHttps](INFO): SBD MOMSN=7984104
2018-03-08T08:27:10.539Z,1520497630.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-03-08T08:27:10.540Z,1520497630.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:16.401Z,1520497636.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:16.404Z,1520497636.404 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T08:27:16.404Z,1520497636.404 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T08:27:16.404Z,1520497636.404 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T08:27:16.544Z,1520497636.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:16.873Z,1520497636.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:19.974Z,1520497639.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:20.103Z,1520497640.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:20.489Z,1520497640.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:20.900Z,1520497640.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:21.296Z,1520497641.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:21.669Z,1520497641.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:22.072Z,1520497642.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:22.471Z,1520497642.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:22.897Z,1520497642.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:23.276Z,1520497643.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:23.698Z,1520497643.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:24.068Z,1520497644.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:24.471Z,1520497644.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:24.898Z,1520497644.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:25.276Z,1520497645.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:25.701Z,1520497645.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:26.070Z,1520497646.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:26.476Z,1520497646.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:26.886Z,1520497646.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:27.280Z,1520497647.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:27.680Z,1520497647.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:28.076Z,1520497648.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:28.473Z,1520497648.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:28.880Z,1520497648.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:29.281Z,1520497649.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:29.677Z,1520497649.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:30.073Z,1520497650.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:30.471Z,1520497650.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:30.879Z,1520497650.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:31.286Z,1520497651.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:31.680Z,1520497651.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:32.082Z,1520497652.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:32.475Z,1520497652.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:32.880Z,1520497652.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:33.283Z,1520497653.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:33.683Z,1520497653.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:34.071Z,1520497654.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:34.474Z,1520497654.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:34.883Z,1520497654.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:35.280Z,1520497655.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:35.686Z,1520497655.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:36.075Z,1520497656.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:36.474Z,1520497656.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:36.879Z,1520497656.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:37.280Z,1520497657.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:37.679Z,1520497657.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:38.075Z,1520497658.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:38.475Z,1520497658.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:38.880Z,1520497658.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:39.286Z,1520497659.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:39.683Z,1520497659.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:40.075Z,1520497660.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:40.478Z,1520497660.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:40.911Z,1520497660.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:41.279Z,1520497661.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:41.683Z,1520497661.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:42.083Z,1520497662.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:42.520Z,1520497662.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:42.882Z,1520497662.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:43.284Z,1520497663.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:43.703Z,1520497663.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:44.099Z,1520497664.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:44.481Z,1520497664.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:44.906Z,1520497664.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:45.264Z,1520497665.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:45.691Z,1520497665.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:46.073Z,1520497666.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:46.498Z,1520497666.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:46.877Z,1520497666.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:47.270Z,1520497667.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:47.671Z,1520497667.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:48.071Z,1520497668.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:48.470Z,1520497668.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:48.898Z,1520497668.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:49.276Z,1520497669.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:49.700Z,1520497669.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:50.071Z,1520497670.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:50.471Z,1520497670.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:50.899Z,1520497670.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:51.276Z,1520497671.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:51.698Z,1520497671.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:52.066Z,1520497672.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:52.471Z,1520497672.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:52.898Z,1520497672.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:53.298Z,1520497673.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:53.676Z,1520497673.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:54.072Z,1520497674.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:54.470Z,1520497674.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:54.897Z,1520497674.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:55.295Z,1520497675.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:55.709Z,1520497675.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:56.084Z,1520497676.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:56.463Z,1520497676.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:56.872Z,1520497676.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:57.277Z,1520497677.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:57.678Z,1520497677.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:58.063Z,1520497678.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:58.510Z,1520497678.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:58.876Z,1520497678.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:59.280Z,1520497679.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:27:59.678Z,1520497679.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:00.064Z,1520497680.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:00.482Z,1520497680.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:00.883Z,1520497680.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:01.298Z,1520497681.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:01.695Z,1520497681.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:02.069Z,1520497682.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:02.480Z,1520497682.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:02.885Z,1520497682.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:03.290Z,1520497683.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:03.684Z,1520497683.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:04.070Z,1520497684.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:04.473Z,1520497684.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:04.882Z,1520497684.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:05.286Z,1520497685.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:05.689Z,1520497685.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:06.077Z,1520497686.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:06.474Z,1520497686.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:06.880Z,1520497686.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:07.285Z,1520497687.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:07.696Z,1520497687.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:08.078Z,1520497688.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:08.471Z,1520497688.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:08.881Z,1520497688.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:09.294Z,1520497689.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:09.687Z,1520497689.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:10.074Z,1520497690.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:10.482Z,1520497690.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:10.880Z,1520497690.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:11.291Z,1520497691.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:11.682Z,1520497691.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:12.071Z,1520497692.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:12.473Z,1520497692.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:12.879Z,1520497692.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:13.284Z,1520497693.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:13.690Z,1520497693.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:14.085Z,1520497694.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:14.478Z,1520497694.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:14.877Z,1520497694.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:15.286Z,1520497695.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:15.686Z,1520497695.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:16.076Z,1520497696.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:16.476Z,1520497696.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:16.883Z,1520497696.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:19.983Z,1520497699.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:20.139Z,1520497700.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:20.471Z,1520497700.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:20.852Z,1520497700.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:21.278Z,1520497701.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:21.654Z,1520497701.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:22.060Z,1520497702.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:22.481Z,1520497702.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:22.861Z,1520497702.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:23.250Z,1520497703.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:23.651Z,1520497703.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:24.056Z,1520497704.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:24.454Z,1520497704.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:24.857Z,1520497704.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:25.282Z,1520497705.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:25.662Z,1520497705.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:26.055Z,1520497706.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:26.454Z,1520497706.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:26.884Z,1520497706.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:27.264Z,1520497707.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:27.668Z,1520497707.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:28.053Z,1520497708.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:28.454Z,1520497708.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:28.857Z,1520497708.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:29.267Z,1520497709.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:29.662Z,1520497709.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:30.055Z,1520497710.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:30.454Z,1520497710.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:30.857Z,1520497710.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:31.268Z,1520497711.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:31.666Z,1520497711.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:32.057Z,1520497712.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:32.458Z,1520497712.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:32.860Z,1520497712.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:33.264Z,1520497713.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:33.661Z,1520497713.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:34.050Z,1520497714.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:34.456Z,1520497714.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:34.861Z,1520497714.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:35.262Z,1520497715.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:35.667Z,1520497715.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:36.055Z,1520497716.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:36.457Z,1520497716.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:36.860Z,1520497716.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:37.264Z,1520497717.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:37.666Z,1520497717.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:38.051Z,1520497718.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:38.454Z,1520497718.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:38.860Z,1520497718.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:39.264Z,1520497719.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:39.666Z,1520497719.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:40.057Z,1520497720.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:40.459Z,1520497720.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:40.859Z,1520497720.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:41.263Z,1520497721.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:41.660Z,1520497721.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:42.062Z,1520497722.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:42.457Z,1520497722.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:42.860Z,1520497722.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:43.260Z,1520497723.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:43.659Z,1520497723.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:44.059Z,1520497724.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:44.458Z,1520497724.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:44.861Z,1520497724.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:45.270Z,1520497725.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:45.666Z,1520497725.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:46.059Z,1520497726.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:46.455Z,1520497726.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:46.863Z,1520497726.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:47.270Z,1520497727.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:47.659Z,1520497727.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:48.058Z,1520497728.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:48.457Z,1520497728.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:48.866Z,1520497728.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:49.264Z,1520497729.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:49.663Z,1520497729.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:50.059Z,1520497730.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:50.453Z,1520497730.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:50.860Z,1520497730.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:51.264Z,1520497731.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:51.667Z,1520497731.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:52.059Z,1520497732.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:52.458Z,1520497732.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:52.863Z,1520497732.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:53.264Z,1520497733.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:53.670Z,1520497733.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:54.058Z,1520497734.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:54.452Z,1520497734.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:54.863Z,1520497734.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:55.275Z,1520497735.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:55.668Z,1520497735.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:56.058Z,1520497736.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:56.461Z,1520497736.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:56.865Z,1520497736.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:57.275Z,1520497737.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:57.664Z,1520497737.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:58.065Z,1520497738.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:58.462Z,1520497738.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:58.868Z,1520497738.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:59.274Z,1520497739.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:28:59.666Z,1520497739.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:00.057Z,1520497740.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:00.457Z,1520497740.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:00.865Z,1520497740.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:01.275Z,1520497741.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:01.670Z,1520497741.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:02.059Z,1520497742.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:02.462Z,1520497742.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:02.865Z,1520497742.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:03.271Z,1520497743.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:03.675Z,1520497743.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:04.058Z,1520497744.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:04.455Z,1520497744.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:04.865Z,1520497744.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:05.275Z,1520497745.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:05.661Z,1520497745.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:06.058Z,1520497746.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:06.461Z,1520497746.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:06.869Z,1520497746.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:07.269Z,1520497747.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:07.671Z,1520497747.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:08.059Z,1520497748.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:08.466Z,1520497748.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:08.867Z,1520497748.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:09.272Z,1520497749.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:09.666Z,1520497749.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:10.066Z,1520497750.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:10.463Z,1520497750.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:10.864Z,1520497750.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:11.270Z,1520497751.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:11.667Z,1520497751.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:12.061Z,1520497752.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:12.462Z,1520497752.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:12.864Z,1520497752.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:13.269Z,1520497753.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:13.667Z,1520497753.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:14.059Z,1520497754.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:14.464Z,1520497754.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:14.867Z,1520497754.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:15.271Z,1520497755.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:15.671Z,1520497755.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:16.067Z,1520497756.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:16.462Z,1520497756.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:16.875Z,1520497756.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:17.279Z,1520497757.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:20.368Z,1520497760.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:20.510Z,1520497760.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:20.839Z,1520497760.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:21.239Z,1520497761.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:21.638Z,1520497761.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:22.045Z,1520497762.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:22.452Z,1520497762.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:22.843Z,1520497762.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:23.238Z,1520497763.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:23.638Z,1520497763.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:24.039Z,1520497764.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:24.438Z,1520497764.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:24.840Z,1520497764.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:25.244Z,1520497765.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:25.673Z,1520497765.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:26.041Z,1520497766.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:26.446Z,1520497766.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:26.846Z,1520497766.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:27.243Z,1520497767.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:27.644Z,1520497767.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:28.045Z,1520497768.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:28.442Z,1520497768.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:28.847Z,1520497768.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:29.254Z,1520497769.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:29.647Z,1520497769.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:30.042Z,1520497770.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:30.439Z,1520497770.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:30.848Z,1520497770.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:31.251Z,1520497771.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:31.651Z,1520497771.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:32.042Z,1520497772.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:32.441Z,1520497772.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:32.854Z,1520497772.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:33.252Z,1520497773.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:33.649Z,1520497773.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:34.045Z,1520497774.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:34.439Z,1520497774.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:34.848Z,1520497774.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:35.252Z,1520497775.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:35.645Z,1520497775.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:36.042Z,1520497776.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:36.450Z,1520497776.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:36.848Z,1520497776.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:37.262Z,1520497777.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:37.648Z,1520497777.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:38.047Z,1520497778.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:38.435Z,1520497778.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:38.853Z,1520497778.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:39.252Z,1520497779.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:39.650Z,1520497779.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:40.046Z,1520497780.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:40.450Z,1520497780.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:40.853Z,1520497780.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:41.254Z,1520497781.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:41.658Z,1520497781.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:42.046Z,1520497782.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:42.447Z,1520497782.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:42.859Z,1520497782.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:43.250Z,1520497783.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:43.693Z,1520497783.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:44.060Z,1520497784.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:44.450Z,1520497784.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:44.879Z,1520497784.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:45.279Z,1520497785.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:45.666Z,1520497785.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:46.034Z,1520497786.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:46.437Z,1520497786.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:46.861Z,1520497786.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:47.248Z,1520497787.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:47.667Z,1520497787.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:48.039Z,1520497788.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:48.442Z,1520497788.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:48.867Z,1520497788.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:49.266Z,1520497789.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:49.666Z,1520497789.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:50.038Z,1520497790.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:50.442Z,1520497790.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:50.866Z,1520497790.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:51.264Z,1520497791.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:51.641Z,1520497791.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:52.039Z,1520497792.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:52.439Z,1520497792.439 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:52.439Z,1520497792.439 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16
2018-03-08T08:29:52.439Z,1520497792.439 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T08:29:52.441Z,1520497792.441 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:52.441Z,1520497792.441 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-03-08T08:29:52.441Z,1520497792.441 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T08:29:52.443Z,1520497792.443 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:52.443Z,1520497792.443 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-03-08T08:29:52.443Z,1520497792.443 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T08:29:52.471Z,1520497792.471 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T08:29:52.471Z,1520497792.471 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T08:29:52.472Z,1520497792.472 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T08:29:52.851Z,1520497792.851 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T08:29:52.851Z,1520497792.851 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16
2018-03-08T08:29:52.851Z,1520497792.851 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T08:29:52.851Z,1520497792.851 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-03-08T08:29:52.852Z,1520497792.852 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T08:29:52.852Z,1520497792.852 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-03-08T08:29:53.243Z,1520497793.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T08:29:53.243Z,1520497793.243 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:29:53.244Z,1520497793.244 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:29:53.244Z,1520497793.244 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T08:29:53.244Z,1520497793.244 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:29:53.245Z,1520497793.245 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:29:53.245Z,1520497793.245 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T08:29:53.246Z,1520497793.246 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:29:53.246Z,1520497793.246 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:29:53.649Z,1520497793.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T08:29:53.650Z,1520497793.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:54.042Z,1520497794.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T08:29:54.043Z,1520497794.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:54.441Z,1520497794.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T08:29:54.441Z,1520497794.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:54.849Z,1520497794.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T08:29:54.850Z,1520497794.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:55.248Z,1520497795.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T08:29:55.249Z,1520497795.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:55.647Z,1520497795.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T08:29:55.648Z,1520497795.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:56.043Z,1520497796.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T08:29:56.044Z,1520497796.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:56.446Z,1520497796.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T08:29:56.447Z,1520497796.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:56.854Z,1520497796.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T08:29:56.855Z,1520497796.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:57.248Z,1520497797.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T08:29:57.249Z,1520497797.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:57.647Z,1520497797.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T08:29:57.648Z,1520497797.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:58.044Z,1520497798.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T08:29:58.045Z,1520497798.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:58.439Z,1520497798.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T08:29:58.440Z,1520497798.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:58.847Z,1520497798.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T08:29:58.848Z,1520497798.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:59.249Z,1520497799.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T08:29:59.249Z,1520497799.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:29:59.648Z,1520497799.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T08:29:59.649Z,1520497799.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:00.038Z,1520497800.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T08:30:00.039Z,1520497800.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:00.436Z,1520497800.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T08:30:00.441Z,1520497800.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:00.852Z,1520497800.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T08:30:00.853Z,1520497800.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:01.251Z,1520497801.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T08:30:01.252Z,1520497801.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:01.647Z,1520497801.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T08:30:01.647Z,1520497801.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:02.038Z,1520497802.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T08:30:02.039Z,1520497802.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:02.438Z,1520497802.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T08:30:02.439Z,1520497802.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:02.847Z,1520497802.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T08:30:02.848Z,1520497802.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:03.251Z,1520497803.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T08:30:03.252Z,1520497803.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:03.650Z,1520497803.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T08:30:03.651Z,1520497803.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:04.042Z,1520497804.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T08:30:04.043Z,1520497804.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:04.442Z,1520497804.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T08:30:04.443Z,1520497804.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:04.848Z,1520497804.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T08:30:04.849Z,1520497804.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:05.251Z,1520497805.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T08:30:05.252Z,1520497805.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:05.651Z,1520497805.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T08:30:05.652Z,1520497805.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:06.043Z,1520497806.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T08:30:06.044Z,1520497806.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:06.438Z,1520497806.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T08:30:06.439Z,1520497806.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:06.847Z,1520497806.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T08:30:06.848Z,1520497806.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:07.254Z,1520497807.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T08:30:07.255Z,1520497807.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:07.650Z,1520497807.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T08:30:07.651Z,1520497807.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:08.043Z,1520497808.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T08:30:08.044Z,1520497808.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:08.446Z,1520497808.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T08:30:08.447Z,1520497808.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:08.847Z,1520497808.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T08:30:08.849Z,1520497808.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:09.250Z,1520497809.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T08:30:09.251Z,1520497809.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:09.650Z,1520497809.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T08:30:09.651Z,1520497809.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:10.042Z,1520497810.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T08:30:10.043Z,1520497810.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:10.442Z,1520497810.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T08:30:10.443Z,1520497810.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:10.851Z,1520497810.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T08:30:10.852Z,1520497810.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:11.254Z,1520497811.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T08:30:11.255Z,1520497811.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:11.651Z,1520497811.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T08:30:11.652Z,1520497811.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:12.042Z,1520497812.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T08:30:12.042Z,1520497812.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:12.438Z,1520497812.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T08:30:12.439Z,1520497812.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:12.848Z,1520497812.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:13.254Z,1520497813.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:13.648Z,1520497813.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:14.039Z,1520497814.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:14.441Z,1520497814.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:14.849Z,1520497814.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:15.251Z,1520497815.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:15.651Z,1520497815.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:16.046Z,1520497816.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:16.442Z,1520497816.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:16.852Z,1520497816.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:17.258Z,1520497817.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:17.658Z,1520497817.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:20.742Z,1520497820.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:20.880Z,1520497820.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:21.234Z,1520497821.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:21.642Z,1520497821.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:22.031Z,1520497822.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:22.421Z,1520497822.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:22.831Z,1520497822.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:23.207Z,1520497823.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:23.630Z,1520497823.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:24.032Z,1520497824.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:24.428Z,1520497824.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:24.825Z,1520497824.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:25.230Z,1520497825.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:25.609Z,1520497825.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:26.010Z,1520497826.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:26.408Z,1520497826.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:26.803Z,1520497826.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:27.220Z,1520497827.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:27.620Z,1520497827.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:28.020Z,1520497828.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:28.442Z,1520497828.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:28.814Z,1520497828.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:29.214Z,1520497829.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:29.614Z,1520497829.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:30.021Z,1520497830.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:30.419Z,1520497830.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:30.820Z,1520497830.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:31.209Z,1520497831.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:31.618Z,1520497831.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:32.019Z,1520497832.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:32.430Z,1520497832.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:32.809Z,1520497832.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:33.233Z,1520497833.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:33.636Z,1520497833.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:34.036Z,1520497834.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:34.413Z,1520497834.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:34.811Z,1520497834.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:35.212Z,1520497835.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:35.614Z,1520497835.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:36.041Z,1520497836.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:36.437Z,1520497836.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:36.840Z,1520497836.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:37.214Z,1520497837.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:37.615Z,1520497837.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:38.014Z,1520497838.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:38.419Z,1520497838.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:38.815Z,1520497838.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:39.237Z,1520497839.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:39.628Z,1520497839.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:40.021Z,1520497840.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:40.413Z,1520497840.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:40.815Z,1520497840.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:41.222Z,1520497841.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:41.617Z,1520497841.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:42.019Z,1520497842.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:42.426Z,1520497842.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:42.823Z,1520497842.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:43.217Z,1520497843.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:43.618Z,1520497843.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:44.013Z,1520497844.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:44.414Z,1520497844.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:44.823Z,1520497844.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:45.223Z,1520497845.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:45.623Z,1520497845.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:46.026Z,1520497846.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:46.422Z,1520497846.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:46.814Z,1520497846.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:47.218Z,1520497847.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:47.616Z,1520497847.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:48.020Z,1520497848.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:48.423Z,1520497848.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:48.823Z,1520497848.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:49.214Z,1520497849.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:49.619Z,1520497849.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:50.026Z,1520497850.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:50.414Z,1520497850.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:50.822Z,1520497850.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:51.230Z,1520497851.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:51.624Z,1520497851.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:52.023Z,1520497852.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:52.415Z,1520497852.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:52.814Z,1520497852.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:53.226Z,1520497853.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:53.622Z,1520497853.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:54.023Z,1520497854.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:54.430Z,1520497854.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:54.823Z,1520497854.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:55.214Z,1520497855.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:55.618Z,1520497855.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:56.013Z,1520497856.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:56.414Z,1520497856.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:56.822Z,1520497856.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:57.225Z,1520497857.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:57.623Z,1520497857.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:58.023Z,1520497858.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:58.413Z,1520497858.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:58.813Z,1520497858.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:59.219Z,1520497859.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:30:59.623Z,1520497859.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:00.023Z,1520497860.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:00.424Z,1520497860.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:00.823Z,1520497860.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:01.215Z,1520497861.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:01.619Z,1520497861.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:02.013Z,1520497862.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:02.414Z,1520497862.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:02.817Z,1520497862.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:03.227Z,1520497863.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:03.623Z,1520497863.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:04.023Z,1520497864.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:04.413Z,1520497864.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:04.814Z,1520497864.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:05.219Z,1520497865.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:05.618Z,1520497865.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:06.024Z,1520497866.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:06.426Z,1520497866.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:06.823Z,1520497866.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:07.210Z,1520497867.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:07.613Z,1520497867.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:08.015Z,1520497868.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:08.410Z,1520497868.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:08.818Z,1520497868.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:09.223Z,1520497869.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:09.622Z,1520497869.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:10.026Z,1520497870.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:10.422Z,1520497870.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:10.815Z,1520497870.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:11.215Z,1520497871.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:11.614Z,1520497871.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:12.024Z,1520497872.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:12.423Z,1520497872.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:12.824Z,1520497872.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:13.226Z,1520497873.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:13.611Z,1520497873.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:14.014Z,1520497874.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:14.423Z,1520497874.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:14.819Z,1520497874.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:15.234Z,1520497875.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:15.629Z,1520497875.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:16.025Z,1520497876.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:16.418Z,1520497876.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:16.820Z,1520497876.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:17.219Z,1520497877.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:17.617Z,1520497877.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:18.030Z,1520497878.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:21.126Z,1520497881.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:21.259Z,1520497881.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:21.622Z,1520497881.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:22.019Z,1520497882.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:22.426Z,1520497882.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:22.822Z,1520497882.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:23.227Z,1520497883.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:23.626Z,1520497883.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:24.034Z,1520497884.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:24.416Z,1520497884.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:24.817Z,1520497884.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:25.219Z,1520497885.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:25.615Z,1520497885.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:26.027Z,1520497886.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:26.427Z,1520497886.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:26.834Z,1520497886.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:27.214Z,1520497887.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:27.618Z,1520497887.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:28.022Z,1520497888.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:28.418Z,1520497888.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:28.822Z,1520497888.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:29.229Z,1520497889.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:29.629Z,1520497889.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:30.034Z,1520497890.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:30.427Z,1520497890.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:30.821Z,1520497890.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:31.218Z,1520497891.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:31.615Z,1520497891.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:32.029Z,1520497892.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:32.427Z,1520497892.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:32.827Z,1520497892.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:33.221Z,1520497893.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:33.622Z,1520497893.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:34.023Z,1520497894.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:34.418Z,1520497894.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:34.817Z,1520497894.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:35.227Z,1520497895.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:35.632Z,1520497895.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:36.034Z,1520497896.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:36.421Z,1520497896.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:36.819Z,1520497896.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:37.222Z,1520497897.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:37.622Z,1520497897.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:38.027Z,1520497898.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:38.455Z,1520497898.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:38.835Z,1520497898.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:39.240Z,1520497899.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:39.646Z,1520497899.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:40.041Z,1520497900.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:40.433Z,1520497900.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:40.455Z,1520497900.455 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T08:31:40.843Z,1520497900.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:41.231Z,1520497901.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:41.647Z,1520497901.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:42.041Z,1520497902.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:42.443Z,1520497902.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:42.847Z,1520497902.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:43.239Z,1520497903.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:43.613Z,1520497903.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:44.039Z,1520497904.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:44.467Z,1520497904.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:44.821Z,1520497904.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:45.218Z,1520497905.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:45.620Z,1520497905.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:46.017Z,1520497906.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:46.416Z,1520497906.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:46.826Z,1520497906.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:47.227Z,1520497907.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:47.627Z,1520497907.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:48.028Z,1520497908.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:48.423Z,1520497908.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:48.817Z,1520497908.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:49.221Z,1520497909.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:49.618Z,1520497909.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:50.039Z,1520497910.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:50.442Z,1520497910.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:50.838Z,1520497910.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:51.227Z,1520497911.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:51.626Z,1520497911.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:52.026Z,1520497912.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:52.421Z,1520497912.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:52.820Z,1520497912.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:53.249Z,1520497913.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:53.630Z,1520497913.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:54.030Z,1520497914.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:54.427Z,1520497914.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:54.825Z,1520497914.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:55.241Z,1520497915.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:55.627Z,1520497915.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:56.033Z,1520497916.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:56.438Z,1520497916.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:56.829Z,1520497916.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:57.225Z,1520497917.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:57.619Z,1520497917.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:58.021Z,1520497918.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:58.419Z,1520497918.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:58.819Z,1520497918.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:59.224Z,1520497919.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:31:59.632Z,1520497919.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:00.033Z,1520497920.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:00.419Z,1520497920.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:00.825Z,1520497920.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:01.221Z,1520497921.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:01.627Z,1520497921.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:02.028Z,1520497922.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:02.438Z,1520497922.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:02.828Z,1520497922.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:03.221Z,1520497923.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:03.626Z,1520497923.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:04.025Z,1520497924.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:04.422Z,1520497924.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:04.831Z,1520497924.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:05.235Z,1520497925.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:05.636Z,1520497925.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:06.031Z,1520497926.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:06.431Z,1520497926.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:06.830Z,1520497926.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:07.212Z,1520497927.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:07.619Z,1520497927.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:08.044Z,1520497928.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:08.450Z,1520497928.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:08.844Z,1520497928.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:09.214Z,1520497929.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:09.623Z,1520497929.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:10.027Z,1520497930.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:10.418Z,1520497930.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:10.832Z,1520497930.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:11.228Z,1520497931.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:11.623Z,1520497931.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:12.022Z,1520497932.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:12.422Z,1520497932.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:12.813Z,1520497932.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:13.224Z,1520497933.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:13.628Z,1520497933.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:14.024Z,1520497934.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:14.422Z,1520497934.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:14.817Z,1520497934.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:15.218Z,1520497935.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:15.627Z,1520497935.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:16.027Z,1520497936.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:16.424Z,1520497936.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:16.828Z,1520497936.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:16.831Z,1520497936.831 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T08:32:16.832Z,1520497936.832 [Default:CheckIn:C.Wait] Stopped
2018-03-08T08:32:16.832Z,1520497936.832 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T08:32:16.832Z,1520497936.832 [Default:CheckIn:D] Running Loop=1
2018-03-08T08:32:17.227Z,1520497937.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:17.230Z,1520497937.230 [Default:CheckIn:D] Stopped
2018-03-08T08:32:17.230Z,1520497937.230 [Default:CheckIn:E] Running Loop=1
2018-03-08T08:32:17.621Z,1520497937.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:17.624Z,1520497937.624 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 46.540413 min 
2018-03-08T08:32:17.624Z,1520497937.624 [Default:CheckIn:E] Stopped
2018-03-08T08:32:17.624Z,1520497937.624 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T08:32:17.624Z,1520497937.624 [Default:CheckIn] Stopped
2018-03-08T08:32:17.624Z,1520497937.624 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T08:32:17.625Z,1520497937.625 [Default:CheckIn](INFO): Running loop #5
2018-03-08T08:32:17.625Z,1520497937.625 [Default:CheckIn] Running Loop=5
2018-03-08T08:32:17.625Z,1520497937.625 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T08:32:17.625Z,1520497937.625 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T08:32:18.022Z,1520497938.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:21.179Z,1520497941.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:21.314Z,1520497941.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:21.680Z,1520497941.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:22.082Z,1520497942.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:22.478Z,1520497942.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:22.866Z,1520497942.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:23.262Z,1520497943.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:23.662Z,1520497943.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:24.072Z,1520497944.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:24.497Z,1520497944.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:24.865Z,1520497944.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:25.259Z,1520497945.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:25.683Z,1520497945.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:26.064Z,1520497946.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:26.466Z,1520497946.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:26.882Z,1520497946.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:27.282Z,1520497947.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:27.712Z,1520497947.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:28.078Z,1520497948.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:28.479Z,1520497948.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:28.921Z,1520497948.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:29.287Z,1520497949.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:29.676Z,1520497949.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:30.075Z,1520497950.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:30.474Z,1520497950.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:30.890Z,1520497950.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:31.283Z,1520497951.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:31.680Z,1520497951.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:32.072Z,1520497952.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:32.471Z,1520497952.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:32.880Z,1520497952.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:33.285Z,1520497953.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:33.680Z,1520497953.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:34.073Z,1520497954.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:34.460Z,1520497954.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:34.881Z,1520497954.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:35.280Z,1520497955.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:35.687Z,1520497955.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:36.087Z,1520497956.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:36.477Z,1520497956.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:36.885Z,1520497956.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:37.290Z,1520497957.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:37.688Z,1520497957.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:38.063Z,1520497958.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:38.467Z,1520497958.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:38.894Z,1520497958.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:39.289Z,1520497959.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:39.694Z,1520497959.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:40.065Z,1520497960.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:40.462Z,1520497960.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:40.872Z,1520497960.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:41.295Z,1520497961.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:41.665Z,1520497961.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:42.065Z,1520497962.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:42.466Z,1520497962.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:42.864Z,1520497962.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:43.294Z,1520497963.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:43.670Z,1520497963.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:44.063Z,1520497964.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:44.467Z,1520497964.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:44.876Z,1520497964.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:45.292Z,1520497965.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:45.672Z,1520497965.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:46.067Z,1520497966.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:46.466Z,1520497966.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:46.894Z,1520497966.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:47.276Z,1520497967.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:47.667Z,1520497967.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:48.068Z,1520497968.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:48.466Z,1520497968.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:48.867Z,1520497968.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:49.273Z,1520497969.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:49.695Z,1520497969.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:50.068Z,1520497970.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:50.466Z,1520497970.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:50.868Z,1520497970.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:51.294Z,1520497971.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:51.695Z,1520497971.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:52.066Z,1520497972.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:52.466Z,1520497972.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:52.869Z,1520497972.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:53.295Z,1520497973.295 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:53.295Z,1520497973.295 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17
2018-03-08T08:32:53.295Z,1520497973.295 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T08:32:53.297Z,1520497973.297 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:53.297Z,1520497973.297 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-03-08T08:32:53.297Z,1520497973.297 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T08:32:53.299Z,1520497973.299 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:53.299Z,1520497973.299 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-03-08T08:32:53.299Z,1520497973.299 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T08:32:53.311Z,1520497973.311 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T08:32:53.311Z,1520497973.311 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T08:32:53.311Z,1520497973.311 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T08:32:53.692Z,1520497973.692 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T08:32:53.692Z,1520497973.692 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17
2018-03-08T08:32:53.692Z,1520497973.692 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T08:32:53.692Z,1520497973.692 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-03-08T08:32:53.697Z,1520497973.697 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T08:32:53.697Z,1520497973.697 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-03-08T08:32:54.067Z,1520497974.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T08:32:54.068Z,1520497974.068 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:32:54.068Z,1520497974.068 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:32:54.069Z,1520497974.069 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T08:32:54.069Z,1520497974.069 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:32:54.069Z,1520497974.069 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:32:54.070Z,1520497974.070 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T08:32:54.070Z,1520497974.070 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:32:54.071Z,1520497974.071 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:32:54.470Z,1520497974.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T08:32:54.471Z,1520497974.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:54.873Z,1520497974.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T08:32:54.874Z,1520497974.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:55.282Z,1520497975.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T08:32:55.283Z,1520497975.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:55.679Z,1520497975.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T08:32:55.680Z,1520497975.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:56.071Z,1520497976.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T08:32:56.072Z,1520497976.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:56.467Z,1520497976.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T08:32:56.467Z,1520497976.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:56.882Z,1520497976.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T08:32:56.883Z,1520497976.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:57.286Z,1520497977.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T08:32:57.287Z,1520497977.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:57.679Z,1520497977.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T08:32:57.680Z,1520497977.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:58.071Z,1520497978.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T08:32:58.072Z,1520497978.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:58.467Z,1520497978.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T08:32:58.468Z,1520497978.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:58.880Z,1520497978.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T08:32:58.881Z,1520497978.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:59.280Z,1520497979.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T08:32:59.281Z,1520497979.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:32:59.677Z,1520497979.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T08:32:59.678Z,1520497979.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:00.067Z,1520497980.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T08:33:00.068Z,1520497980.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:00.468Z,1520497980.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T08:33:00.469Z,1520497980.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:00.878Z,1520497980.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T08:33:00.879Z,1520497980.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:01.283Z,1520497981.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T08:33:01.284Z,1520497981.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:01.683Z,1520497981.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T08:33:01.684Z,1520497981.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:02.082Z,1520497982.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T08:33:02.083Z,1520497982.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:02.486Z,1520497982.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T08:33:02.487Z,1520497982.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:02.892Z,1520497982.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T08:33:02.893Z,1520497982.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:03.287Z,1520497983.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T08:33:03.288Z,1520497983.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:03.687Z,1520497983.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T08:33:03.688Z,1520497983.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:04.070Z,1520497984.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T08:33:04.071Z,1520497984.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:04.466Z,1520497984.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T08:33:04.467Z,1520497984.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:04.893Z,1520497984.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T08:33:04.894Z,1520497984.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:05.292Z,1520497985.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T08:33:05.293Z,1520497985.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:05.670Z,1520497985.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T08:33:05.671Z,1520497985.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:06.063Z,1520497986.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T08:33:06.064Z,1520497986.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:06.474Z,1520497986.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T08:33:06.475Z,1520497986.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:06.880Z,1520497986.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T08:33:06.901Z,1520497986.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:07.282Z,1520497987.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T08:33:07.283Z,1520497987.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:07.682Z,1520497987.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T08:33:07.683Z,1520497987.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:08.070Z,1520497988.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T08:33:08.071Z,1520497988.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:08.467Z,1520497988.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T08:33:08.468Z,1520497988.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:08.882Z,1520497988.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T08:33:08.883Z,1520497988.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:09.286Z,1520497989.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T08:33:09.287Z,1520497989.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:09.679Z,1520497989.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T08:33:09.680Z,1520497989.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:10.071Z,1520497990.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T08:33:10.071Z,1520497990.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:10.469Z,1520497990.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T08:33:10.470Z,1520497990.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:10.882Z,1520497990.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T08:33:10.883Z,1520497990.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:11.279Z,1520497991.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T08:33:11.280Z,1520497991.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:11.673Z,1520497991.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T08:33:11.674Z,1520497991.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:12.069Z,1520497992.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T08:33:12.070Z,1520497992.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:12.470Z,1520497992.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T08:33:12.471Z,1520497992.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:12.882Z,1520497992.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T08:33:12.883Z,1520497992.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:13.283Z,1520497993.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T08:33:13.284Z,1520497993.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:13.682Z,1520497993.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:14.064Z,1520497994.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:14.470Z,1520497994.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:14.880Z,1520497994.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:15.285Z,1520497995.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:15.680Z,1520497995.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:16.067Z,1520497996.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:16.472Z,1520497996.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:16.882Z,1520497996.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:17.289Z,1520497997.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:17.681Z,1520497997.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:18.089Z,1520497998.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:21.182Z,1520498001.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:21.324Z,1520498001.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:21.656Z,1520498001.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:22.078Z,1520498002.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:22.455Z,1520498002.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:22.851Z,1520498002.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:23.251Z,1520498003.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:23.648Z,1520498003.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:24.078Z,1520498004.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:24.479Z,1520498004.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:24.855Z,1520498004.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:25.251Z,1520498005.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:25.649Z,1520498005.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:26.051Z,1520498006.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:26.456Z,1520498006.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:26.857Z,1520498006.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:27.262Z,1520498007.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:27.657Z,1520498007.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:28.054Z,1520498008.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:28.453Z,1520498008.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:28.857Z,1520498008.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:29.268Z,1520498009.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:29.656Z,1520498009.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:30.053Z,1520498010.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:30.453Z,1520498010.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:30.857Z,1520498010.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:31.260Z,1520498011.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:31.662Z,1520498011.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:32.048Z,1520498012.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:32.454Z,1520498012.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:32.856Z,1520498012.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:33.260Z,1520498013.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:33.657Z,1520498013.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:34.053Z,1520498014.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:34.452Z,1520498014.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:34.857Z,1520498014.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:35.260Z,1520498015.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:35.657Z,1520498015.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:36.053Z,1520498016.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:36.445Z,1520498016.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:36.861Z,1520498016.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:37.262Z,1520498017.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:37.659Z,1520498017.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:38.054Z,1520498018.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:38.449Z,1520498018.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:38.855Z,1520498018.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:39.259Z,1520498019.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:39.663Z,1520498019.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:40.055Z,1520498020.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:40.458Z,1520498020.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:40.863Z,1520498020.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:41.314Z,1520498021.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:41.688Z,1520498021.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:42.054Z,1520498022.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:42.456Z,1520498022.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:42.871Z,1520498022.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:43.263Z,1520498023.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:43.663Z,1520498023.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:44.054Z,1520498024.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:44.451Z,1520498024.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:44.856Z,1520498024.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:45.263Z,1520498025.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:45.663Z,1520498025.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:46.055Z,1520498026.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:46.458Z,1520498026.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:46.866Z,1520498026.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:47.262Z,1520498027.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:47.663Z,1520498027.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:48.053Z,1520498028.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:48.456Z,1520498028.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:48.871Z,1520498028.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:49.271Z,1520498029.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:49.664Z,1520498029.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:50.055Z,1520498030.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:50.451Z,1520498030.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:50.865Z,1520498030.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:51.263Z,1520498031.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:51.659Z,1520498031.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:52.056Z,1520498032.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:52.455Z,1520498032.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:52.871Z,1520498032.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:53.261Z,1520498033.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:53.661Z,1520498033.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:54.055Z,1520498034.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:54.452Z,1520498034.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:54.862Z,1520498034.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:55.264Z,1520498035.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:55.665Z,1520498035.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:56.054Z,1520498036.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:56.457Z,1520498036.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:56.860Z,1520498036.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:57.271Z,1520498037.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:57.663Z,1520498037.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:58.052Z,1520498038.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:58.453Z,1520498038.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:58.860Z,1520498038.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:59.266Z,1520498039.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:33:59.671Z,1520498039.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:00.055Z,1520498040.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:00.452Z,1520498040.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:00.860Z,1520498040.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:01.263Z,1520498041.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:01.662Z,1520498041.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:02.056Z,1520498042.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:02.452Z,1520498042.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:02.864Z,1520498042.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:03.268Z,1520498043.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:03.660Z,1520498043.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:04.053Z,1520498044.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:04.462Z,1520498044.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:04.861Z,1520498044.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:05.265Z,1520498045.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:05.660Z,1520498045.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:06.051Z,1520498046.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:06.459Z,1520498046.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:06.856Z,1520498046.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:07.265Z,1520498047.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:07.659Z,1520498047.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:08.055Z,1520498048.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:08.455Z,1520498048.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:08.861Z,1520498048.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:09.268Z,1520498049.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:09.660Z,1520498049.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:10.053Z,1520498050.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:10.458Z,1520498050.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:10.867Z,1520498050.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:11.263Z,1520498051.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:11.658Z,1520498051.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:12.059Z,1520498052.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:12.455Z,1520498052.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:12.865Z,1520498052.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:13.264Z,1520498053.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:13.661Z,1520498053.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:14.056Z,1520498054.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:14.456Z,1520498054.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:14.868Z,1520498054.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:15.268Z,1520498055.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:15.660Z,1520498055.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:16.057Z,1520498056.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:16.459Z,1520498056.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:16.861Z,1520498056.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:17.264Z,1520498057.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:17.660Z,1520498057.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:18.056Z,1520498058.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:18.457Z,1520498058.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:21.560Z,1520498061.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:21.722Z,1520498061.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:22.055Z,1520498062.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:22.429Z,1520498062.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:22.834Z,1520498062.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:23.238Z,1520498063.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:23.631Z,1520498063.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:24.058Z,1520498064.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:24.458Z,1520498064.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:24.861Z,1520498064.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:25.231Z,1520498065.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:25.631Z,1520498065.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:26.030Z,1520498066.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:26.438Z,1520498066.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:26.838Z,1520498066.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:27.236Z,1520498067.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:27.631Z,1520498067.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:28.033Z,1520498068.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:28.431Z,1520498068.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:28.827Z,1520498068.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:29.238Z,1520498069.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:29.631Z,1520498069.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:30.064Z,1520498070.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:30.439Z,1520498070.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:30.865Z,1520498070.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:31.231Z,1520498071.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:31.631Z,1520498071.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:32.033Z,1520498072.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:32.433Z,1520498072.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:32.836Z,1520498072.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:33.240Z,1520498073.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:33.638Z,1520498073.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:34.039Z,1520498074.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:34.433Z,1520498074.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:34.836Z,1520498074.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:35.236Z,1520498075.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:35.635Z,1520498075.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:36.032Z,1520498076.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:36.433Z,1520498076.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:36.836Z,1520498076.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:37.240Z,1520498077.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:37.638Z,1520498077.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:38.033Z,1520498078.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:38.427Z,1520498078.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:38.836Z,1520498078.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:39.235Z,1520498079.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:39.637Z,1520498079.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:40.033Z,1520498080.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:40.430Z,1520498080.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:40.844Z,1520498080.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:41.241Z,1520498081.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:41.640Z,1520498081.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:42.034Z,1520498082.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:42.435Z,1520498082.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:42.841Z,1520498082.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:43.241Z,1520498083.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:43.647Z,1520498083.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:44.034Z,1520498084.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:44.438Z,1520498084.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:44.842Z,1520498084.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:45.238Z,1520498085.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:45.645Z,1520498085.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:46.039Z,1520498086.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:46.433Z,1520498086.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:46.839Z,1520498086.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:47.247Z,1520498087.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:47.644Z,1520498087.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:48.034Z,1520498088.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:48.430Z,1520498088.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:48.840Z,1520498088.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:49.246Z,1520498089.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:49.643Z,1520498089.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:50.030Z,1520498090.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:50.434Z,1520498090.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:50.839Z,1520498090.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:51.240Z,1520498091.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:51.640Z,1520498091.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:52.034Z,1520498092.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:52.434Z,1520498092.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:52.837Z,1520498092.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:53.244Z,1520498093.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:53.640Z,1520498093.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:54.034Z,1520498094.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:54.431Z,1520498094.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:54.840Z,1520498094.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:55.243Z,1520498095.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:55.643Z,1520498095.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:56.034Z,1520498096.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:56.430Z,1520498096.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:56.839Z,1520498096.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:57.243Z,1520498097.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:57.639Z,1520498097.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:58.034Z,1520498098.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:58.429Z,1520498098.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:58.839Z,1520498098.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:59.247Z,1520498099.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:34:59.643Z,1520498099.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:00.031Z,1520498100.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:00.432Z,1520498100.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:00.830Z,1520498100.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:01.251Z,1520498101.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:01.642Z,1520498101.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:02.050Z,1520498102.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:02.431Z,1520498102.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:02.831Z,1520498102.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:03.231Z,1520498103.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:03.631Z,1520498103.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:04.040Z,1520498104.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:04.443Z,1520498104.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:04.846Z,1520498104.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:05.238Z,1520498105.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:05.633Z,1520498105.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:06.031Z,1520498106.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:06.435Z,1520498106.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:06.843Z,1520498106.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:07.254Z,1520498107.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:07.645Z,1520498107.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:08.037Z,1520498108.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:08.435Z,1520498108.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:08.841Z,1520498108.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:09.244Z,1520498109.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:09.642Z,1520498109.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:10.034Z,1520498110.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:10.442Z,1520498110.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:10.838Z,1520498110.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:11.247Z,1520498111.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:11.650Z,1520498111.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:12.040Z,1520498112.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:12.442Z,1520498112.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:12.850Z,1520498112.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:13.247Z,1520498113.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:13.647Z,1520498113.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:14.044Z,1520498114.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:14.441Z,1520498114.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:14.846Z,1520498114.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:15.245Z,1520498115.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:15.649Z,1520498115.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:16.030Z,1520498116.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:16.420Z,1520498116.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:16.844Z,1520498116.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:17.247Z,1520498117.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:17.650Z,1520498117.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:18.027Z,1520498118.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:18.430Z,1520498118.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:18.857Z,1520498118.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:21.936Z,1520498121.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:22.074Z,1520498122.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:22.463Z,1520498122.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:22.834Z,1520498122.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:23.262Z,1520498123.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:23.637Z,1520498123.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:24.065Z,1520498124.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:24.471Z,1520498124.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:24.867Z,1520498124.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:25.242Z,1520498125.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:25.634Z,1520498125.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:26.036Z,1520498126.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:26.438Z,1520498126.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:26.866Z,1520498126.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:27.248Z,1520498127.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:27.640Z,1520498127.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:28.040Z,1520498128.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:28.443Z,1520498128.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:28.841Z,1520498128.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:29.244Z,1520498129.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:29.652Z,1520498129.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:30.041Z,1520498130.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:30.442Z,1520498130.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:30.845Z,1520498130.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:31.246Z,1520498131.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:31.644Z,1520498131.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:32.046Z,1520498132.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:32.441Z,1520498132.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:32.850Z,1520498132.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:33.248Z,1520498133.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:33.644Z,1520498133.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:34.041Z,1520498134.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:34.442Z,1520498134.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:34.845Z,1520498134.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:35.248Z,1520498135.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:35.645Z,1520498135.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:36.041Z,1520498136.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:36.442Z,1520498136.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:36.845Z,1520498136.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:37.248Z,1520498137.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:37.645Z,1520498137.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:38.042Z,1520498138.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:38.442Z,1520498138.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:38.844Z,1520498138.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:39.244Z,1520498139.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:39.643Z,1520498139.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:40.044Z,1520498140.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:40.443Z,1520498140.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:40.845Z,1520498140.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:41.243Z,1520498141.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:41.645Z,1520498141.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:42.038Z,1520498142.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:42.442Z,1520498142.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:42.844Z,1520498142.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:43.282Z,1520498143.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:43.645Z,1520498143.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:44.066Z,1520498144.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:44.434Z,1520498144.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:44.857Z,1520498144.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:45.261Z,1520498145.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:45.655Z,1520498145.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:46.035Z,1520498146.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:46.437Z,1520498146.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:46.855Z,1520498146.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:47.256Z,1520498147.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:47.659Z,1520498147.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:48.035Z,1520498148.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:48.459Z,1520498148.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:48.865Z,1520498148.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:49.260Z,1520498149.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:49.660Z,1520498149.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:50.035Z,1520498150.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:50.442Z,1520498150.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:50.866Z,1520498150.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:51.269Z,1520498151.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:51.640Z,1520498151.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:52.040Z,1520498152.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:52.438Z,1520498152.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:52.866Z,1520498152.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:53.248Z,1520498153.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:53.650Z,1520498153.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:54.040Z,1520498154.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:54.442Z,1520498154.442 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:54.443Z,1520498154.443 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18
2018-03-08T08:35:54.443Z,1520498154.443 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T08:35:54.445Z,1520498154.445 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:54.445Z,1520498154.445 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-03-08T08:35:54.445Z,1520498154.445 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T08:35:54.446Z,1520498154.446 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:54.447Z,1520498154.447 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-03-08T08:35:54.447Z,1520498154.447 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T08:35:54.487Z,1520498154.487 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T08:35:54.487Z,1520498154.487 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T08:35:54.487Z,1520498154.487 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T08:35:54.881Z,1520498154.881 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T08:35:54.881Z,1520498154.881 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18
2018-03-08T08:35:54.882Z,1520498154.882 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T08:35:54.882Z,1520498154.882 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-03-08T08:35:54.882Z,1520498154.882 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T08:35:54.882Z,1520498154.882 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-03-08T08:35:55.250Z,1520498155.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T08:35:55.251Z,1520498155.251 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:35:55.251Z,1520498155.251 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:35:55.251Z,1520498155.251 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T08:35:55.252Z,1520498155.252 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:35:55.252Z,1520498155.252 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:35:55.252Z,1520498155.252 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T08:35:55.253Z,1520498155.253 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:35:55.253Z,1520498155.253 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:35:55.649Z,1520498155.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T08:35:55.649Z,1520498155.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:56.046Z,1520498156.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T08:35:56.047Z,1520498156.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:56.450Z,1520498156.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T08:35:56.451Z,1520498156.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:56.853Z,1520498156.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T08:35:56.854Z,1520498156.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:57.252Z,1520498157.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T08:35:57.253Z,1520498157.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:57.657Z,1520498157.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T08:35:57.658Z,1520498157.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:58.040Z,1520498158.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T08:35:58.041Z,1520498158.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:58.445Z,1520498158.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T08:35:58.446Z,1520498158.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:58.854Z,1520498158.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T08:35:58.855Z,1520498158.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:59.255Z,1520498159.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T08:35:59.256Z,1520498159.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:35:59.648Z,1520498159.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T08:35:59.649Z,1520498159.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:00.044Z,1520498160.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T08:36:00.045Z,1520498160.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:00.446Z,1520498160.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T08:36:00.447Z,1520498160.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:00.849Z,1520498160.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T08:36:00.850Z,1520498160.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:01.256Z,1520498161.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T08:36:01.257Z,1520498161.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:01.658Z,1520498161.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T08:36:01.659Z,1520498161.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:02.040Z,1520498162.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T08:36:02.041Z,1520498162.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:02.446Z,1520498162.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T08:36:02.447Z,1520498162.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:02.847Z,1520498162.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T08:36:02.847Z,1520498162.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:03.247Z,1520498163.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T08:36:03.248Z,1520498163.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:03.653Z,1520498163.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T08:36:03.653Z,1520498163.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:04.043Z,1520498164.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T08:36:04.044Z,1520498164.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:04.439Z,1520498164.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T08:36:04.440Z,1520498164.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:04.851Z,1520498164.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T08:36:04.853Z,1520498164.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:05.255Z,1520498165.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T08:36:05.256Z,1520498165.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:05.647Z,1520498165.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T08:36:05.648Z,1520498165.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:06.046Z,1520498166.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T08:36:06.047Z,1520498166.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:06.448Z,1520498166.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T08:36:06.449Z,1520498166.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:06.850Z,1520498166.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T08:36:06.851Z,1520498166.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:07.255Z,1520498167.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T08:36:07.256Z,1520498167.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:07.655Z,1520498167.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T08:36:07.656Z,1520498167.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:08.052Z,1520498168.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T08:36:08.053Z,1520498168.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:08.448Z,1520498168.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T08:36:08.449Z,1520498168.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:08.854Z,1520498168.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T08:36:08.855Z,1520498168.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:09.252Z,1520498169.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T08:36:09.253Z,1520498169.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:09.651Z,1520498169.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T08:36:09.653Z,1520498169.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:10.046Z,1520498170.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T08:36:10.047Z,1520498170.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:10.429Z,1520498170.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T08:36:10.430Z,1520498170.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:10.858Z,1520498170.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T08:36:10.859Z,1520498170.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:11.262Z,1520498171.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T08:36:11.263Z,1520498171.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:11.653Z,1520498171.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T08:36:11.654Z,1520498171.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:12.050Z,1520498172.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T08:36:12.051Z,1520498172.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:12.454Z,1520498172.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T08:36:12.455Z,1520498172.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:12.858Z,1520498172.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T08:36:12.858Z,1520498172.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:13.257Z,1520498173.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T08:36:13.258Z,1520498173.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:13.654Z,1520498173.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T08:36:13.655Z,1520498173.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:14.037Z,1520498174.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T08:36:14.038Z,1520498174.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:14.438Z,1520498174.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T08:36:14.439Z,1520498174.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:14.863Z,1520498174.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:15.260Z,1520498175.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:15.648Z,1520498175.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:16.040Z,1520498176.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:16.438Z,1520498176.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:16.840Z,1520498176.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:17.270Z,1520498177.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:17.640Z,1520498177.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:18.040Z,1520498178.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:18.442Z,1520498178.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:18.852Z,1520498178.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:21.971Z,1520498181.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:22.098Z,1520498182.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:22.448Z,1520498182.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:22.842Z,1520498182.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:23.274Z,1520498183.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:23.650Z,1520498183.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:24.063Z,1520498184.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:24.455Z,1520498184.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:24.862Z,1520498184.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:25.249Z,1520498185.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:25.642Z,1520498185.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:26.066Z,1520498186.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:26.449Z,1520498186.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:26.853Z,1520498186.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:27.262Z,1520498187.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:27.654Z,1520498187.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:28.043Z,1520498188.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:28.442Z,1520498188.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:28.853Z,1520498188.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:29.255Z,1520498189.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:29.663Z,1520498189.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:30.048Z,1520498190.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:30.442Z,1520498190.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:30.852Z,1520498190.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:31.260Z,1520498191.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:31.653Z,1520498191.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:32.043Z,1520498192.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:32.443Z,1520498192.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:32.856Z,1520498192.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:33.270Z,1520498193.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:33.659Z,1520498193.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:34.047Z,1520498194.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:34.450Z,1520498194.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:34.855Z,1520498194.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:35.256Z,1520498195.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:35.658Z,1520498195.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:36.051Z,1520498196.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:36.453Z,1520498196.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:36.853Z,1520498196.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:37.266Z,1520498197.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:37.656Z,1520498197.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:38.049Z,1520498198.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:38.443Z,1520498198.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:38.857Z,1520498198.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:39.262Z,1520498199.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:39.659Z,1520498199.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:40.046Z,1520498200.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:40.458Z,1520498200.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:40.854Z,1520498200.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:41.254Z,1520498201.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:41.662Z,1520498201.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:42.054Z,1520498202.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:42.458Z,1520498202.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:42.866Z,1520498202.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:43.264Z,1520498203.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:43.662Z,1520498203.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:44.042Z,1520498204.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:44.434Z,1520498204.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:44.860Z,1520498204.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:45.267Z,1520498205.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:45.664Z,1520498205.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:46.041Z,1520498206.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:46.442Z,1520498206.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:46.864Z,1520498206.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:47.260Z,1520498207.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:47.661Z,1520498207.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:48.039Z,1520498208.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:48.466Z,1520498208.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:48.807Z,1520498208.807 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T08:36:48.807Z,1520498208.807 [NAL9602] Data Fault, FailCount= 1
2018-03-08T08:36:48.808Z,1520498208.808 [NAL9602](ERROR): Data Fault
2018-03-08T08:36:48.846Z,1520498208.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:48.888Z,1520498208.888 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T08:36:49.210Z,1520498209.210 [NAL9602](INFO): Powering down
2018-03-08T08:36:49.242Z,1520498209.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:49.642Z,1520498209.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:50.042Z,1520498210.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:50.055Z,1520498210.055 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T08:36:50.055Z,1520498210.055 [NAL9602] No Fault, FailCount= 1
2018-03-08T08:36:50.436Z,1520498210.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:50.843Z,1520498210.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:51.242Z,1520498211.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:51.642Z,1520498211.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:52.042Z,1520498212.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:52.442Z,1520498212.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:52.843Z,1520498212.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:53.273Z,1520498213.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:53.677Z,1520498213.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:54.042Z,1520498214.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:54.446Z,1520498214.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:54.841Z,1520498214.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:55.240Z,1520498215.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:55.641Z,1520498215.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:56.043Z,1520498216.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:56.444Z,1520498216.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:56.839Z,1520498216.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:57.244Z,1520498217.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:57.641Z,1520498217.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:58.043Z,1520498218.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:58.450Z,1520498218.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:58.842Z,1520498218.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:59.242Z,1520498219.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:36:59.643Z,1520498219.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:00.041Z,1520498220.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:00.442Z,1520498220.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:00.844Z,1520498220.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:01.241Z,1520498221.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:01.638Z,1520498221.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:02.042Z,1520498222.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:02.444Z,1520498222.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:02.834Z,1520498222.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:03.240Z,1520498223.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:03.640Z,1520498223.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:04.044Z,1520498224.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:04.445Z,1520498224.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:04.843Z,1520498224.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:05.243Z,1520498225.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:05.644Z,1520498225.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:06.044Z,1520498226.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:06.438Z,1520498226.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:06.842Z,1520498226.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:07.241Z,1520498227.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:07.638Z,1520498227.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:08.041Z,1520498228.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:08.443Z,1520498228.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:08.838Z,1520498228.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:09.245Z,1520498229.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:09.643Z,1520498229.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:10.045Z,1520498230.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:10.446Z,1520498230.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:10.844Z,1520498230.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:11.245Z,1520498231.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:11.644Z,1520498231.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:12.044Z,1520498232.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:12.434Z,1520498232.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:12.847Z,1520498232.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:13.244Z,1520498233.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:13.639Z,1520498233.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:14.042Z,1520498234.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:14.444Z,1520498234.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:14.836Z,1520498234.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:15.241Z,1520498235.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:15.644Z,1520498235.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:16.045Z,1520498236.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:16.444Z,1520498236.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:16.854Z,1520498236.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:17.254Z,1520498237.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:17.650Z,1520498237.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:17.654Z,1520498237.654 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T08:32:17.6Z
2018-03-08T08:37:17.654Z,1520498237.654 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T08:37:17.654Z,1520498237.654 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T08:37:18.032Z,1520498238.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:20.797Z,1520498240.797 [NAL9602](INFO): Powering up NAL9602
2018-03-08T08:37:20.829Z,1520498240.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:21.162Z,1520498241.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:24.271Z,1520498244.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:24.380Z,1520498244.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:24.705Z,1520498244.705 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0020.lzma
2018-03-08T08:37:24.769Z,1520498244.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:25.165Z,1520498245.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:25.496Z,1520498245.496 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0020.lzma.bak
2018-03-08T08:37:25.496Z,1520498245.496 [DataOverHttps](INFO): SBD MOMSN=7984166
2018-03-08T08:37:25.533Z,1520498245.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:26.172Z,1520498246.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:26.359Z,1520498246.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:29.491Z,1520498249.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:29.614Z,1520498249.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:29.987Z,1520498249.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:30.385Z,1520498250.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:30.782Z,1520498250.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:31.186Z,1520498251.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:31.588Z,1520498251.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:34.649Z,1520498254.649 [NAL9602](INFO): NAL9602 initialized
2018-03-08T08:37:34.681Z,1520498254.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:34.816Z,1520498254.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:35.129Z,1520498255.129 [DataOverHttps](INFO): Sending 137 bytes from file Logs/20180308T074127/Express0021.lzma
2018-03-08T08:37:35.198Z,1520498255.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:35.578Z,1520498255.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:35.929Z,1520498255.929 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0021.lzma.bak
2018-03-08T08:37:35.929Z,1520498255.929 [DataOverHttps](INFO): SBD MOMSN=7984168
2018-03-08T08:37:36.007Z,1520498256.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:36.537Z,1520498256.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:36.540Z,1520498256.540 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T08:37:36.540Z,1520498256.540 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T08:37:36.540Z,1520498256.540 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T08:37:36.775Z,1520498256.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:39.881Z,1520498259.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:39.993Z,1520498259.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:40.372Z,1520498260.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:40.774Z,1520498260.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:41.174Z,1520498261.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:41.574Z,1520498261.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:41.954Z,1520498261.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:42.354Z,1520498262.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:42.783Z,1520498262.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:43.174Z,1520498263.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:43.594Z,1520498263.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:43.949Z,1520498263.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:44.374Z,1520498264.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:44.763Z,1520498264.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:45.163Z,1520498265.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:45.553Z,1520498265.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:45.976Z,1520498265.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:46.377Z,1520498266.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:46.779Z,1520498266.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:47.151Z,1520498267.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:47.575Z,1520498267.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:47.957Z,1520498267.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:48.355Z,1520498268.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:48.778Z,1520498268.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:49.174Z,1520498269.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:49.555Z,1520498269.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:49.954Z,1520498269.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:50.353Z,1520498270.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:50.773Z,1520498270.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:51.159Z,1520498271.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:51.557Z,1520498271.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:51.963Z,1520498271.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:52.386Z,1520498272.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:52.760Z,1520498272.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:53.158Z,1520498273.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:53.551Z,1520498273.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:53.974Z,1520498273.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:54.351Z,1520498274.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:54.759Z,1520498274.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:55.163Z,1520498275.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:55.583Z,1520498275.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:55.958Z,1520498275.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:56.358Z,1520498276.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:56.758Z,1520498276.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:57.181Z,1520498277.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:57.555Z,1520498277.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:57.958Z,1520498277.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:58.366Z,1520498278.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:58.780Z,1520498278.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:59.158Z,1520498279.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:59.557Z,1520498279.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:37:59.960Z,1520498279.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:00.370Z,1520498280.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:00.762Z,1520498280.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:01.161Z,1520498281.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:01.570Z,1520498281.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:01.968Z,1520498281.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:02.357Z,1520498282.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:02.756Z,1520498282.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:03.147Z,1520498283.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:03.564Z,1520498283.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:03.961Z,1520498283.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:04.386Z,1520498284.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:04.759Z,1520498284.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:05.177Z,1520498285.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:05.557Z,1520498285.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:05.956Z,1520498285.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:06.354Z,1520498286.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:06.790Z,1520498286.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:07.183Z,1520498287.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:07.557Z,1520498287.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:07.962Z,1520498287.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:08.382Z,1520498288.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:08.759Z,1520498288.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:09.156Z,1520498289.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:09.555Z,1520498289.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:09.979Z,1520498289.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:10.361Z,1520498290.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:10.759Z,1520498290.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:11.159Z,1520498291.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:11.582Z,1520498291.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:11.958Z,1520498291.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:12.357Z,1520498292.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:12.762Z,1520498292.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:13.182Z,1520498293.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:13.562Z,1520498293.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:13.957Z,1520498293.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:14.354Z,1520498294.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:14.781Z,1520498294.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:15.158Z,1520498295.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:15.557Z,1520498295.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:15.956Z,1520498295.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:16.379Z,1520498296.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:16.760Z,1520498296.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:17.156Z,1520498297.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:17.558Z,1520498297.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:17.967Z,1520498297.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:18.357Z,1520498298.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:18.757Z,1520498298.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:19.159Z,1520498299.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:19.578Z,1520498299.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:19.957Z,1520498299.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:20.358Z,1520498300.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:20.751Z,1520498300.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:21.180Z,1520498301.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:21.558Z,1520498301.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:21.963Z,1520498301.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:22.361Z,1520498302.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:22.780Z,1520498302.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:23.154Z,1520498303.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:23.556Z,1520498303.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:23.958Z,1520498303.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:24.381Z,1520498304.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:24.762Z,1520498304.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:25.163Z,1520498305.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:25.563Z,1520498305.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:25.971Z,1520498305.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:26.356Z,1520498306.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:26.757Z,1520498306.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:27.160Z,1520498307.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:27.567Z,1520498307.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:27.967Z,1520498307.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:28.370Z,1520498308.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:28.768Z,1520498308.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:29.170Z,1520498309.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:29.558Z,1520498309.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:29.958Z,1520498309.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:30.357Z,1520498310.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:30.793Z,1520498310.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:31.196Z,1520498311.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:31.567Z,1520498311.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:31.955Z,1520498311.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:32.367Z,1520498312.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:32.759Z,1520498312.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:33.156Z,1520498313.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:33.560Z,1520498313.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:33.994Z,1520498313.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:34.390Z,1520498314.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:34.769Z,1520498314.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:35.155Z,1520498315.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:35.568Z,1520498315.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:35.959Z,1520498315.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:36.359Z,1520498316.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:36.763Z,1520498316.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:37.169Z,1520498317.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:40.273Z,1520498320.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:40.402Z,1520498320.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:40.776Z,1520498320.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:41.174Z,1520498321.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:41.573Z,1520498321.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:41.979Z,1520498321.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:42.383Z,1520498322.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:42.778Z,1520498322.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:43.178Z,1520498323.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:43.599Z,1520498323.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:44.001Z,1520498324.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:44.372Z,1520498324.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:44.777Z,1520498324.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:45.178Z,1520498325.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:45.579Z,1520498325.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:45.966Z,1520498325.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:46.374Z,1520498326.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:46.782Z,1520498326.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:47.174Z,1520498327.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:47.573Z,1520498327.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:47.982Z,1520498327.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:48.379Z,1520498328.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:48.783Z,1520498328.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:49.178Z,1520498329.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:49.563Z,1520498329.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:50.004Z,1520498330.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:50.380Z,1520498330.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:50.780Z,1520498330.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:51.176Z,1520498331.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:51.582Z,1520498331.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:51.967Z,1520498331.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:52.369Z,1520498332.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:52.774Z,1520498332.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:53.171Z,1520498333.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:53.572Z,1520498333.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:53.983Z,1520498333.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:54.376Z,1520498334.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:54.778Z,1520498334.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:55.178Z,1520498335.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:55.566Z,1520498335.566 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:55.566Z,1520498335.566 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19
2018-03-08T08:38:55.566Z,1520498335.566 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T08:38:55.568Z,1520498335.568 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:55.568Z,1520498335.568 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-03-08T08:38:55.568Z,1520498335.568 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T08:38:55.570Z,1520498335.570 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:55.570Z,1520498335.570 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-03-08T08:38:55.570Z,1520498335.570 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T08:38:55.582Z,1520498335.582 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T08:38:55.582Z,1520498335.582 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T08:38:55.582Z,1520498335.582 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T08:38:55.979Z,1520498335.979 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T08:38:55.979Z,1520498335.979 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19
2018-03-08T08:38:55.980Z,1520498335.980 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T08:38:55.980Z,1520498335.980 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-03-08T08:38:55.981Z,1520498335.981 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T08:38:55.981Z,1520498335.981 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-03-08T08:38:56.385Z,1520498336.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T08:38:56.386Z,1520498336.386 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:38:56.386Z,1520498336.386 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:38:56.386Z,1520498336.386 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T08:38:56.387Z,1520498336.387 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:38:56.387Z,1520498336.387 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:38:56.388Z,1520498336.388 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T08:38:56.388Z,1520498336.388 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:38:56.388Z,1520498336.388 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:38:56.807Z,1520498336.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T08:38:56.808Z,1520498336.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:57.180Z,1520498337.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T08:38:57.181Z,1520498337.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:57.586Z,1520498337.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T08:38:57.587Z,1520498337.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:57.967Z,1520498337.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T08:38:57.968Z,1520498337.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:58.382Z,1520498338.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T08:38:58.383Z,1520498338.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:58.773Z,1520498338.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T08:38:58.774Z,1520498338.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:59.172Z,1520498339.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T08:38:59.173Z,1520498339.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:38:59.586Z,1520498339.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T08:38:59.587Z,1520498339.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:00.013Z,1520498340.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T08:39:00.013Z,1520498340.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:00.377Z,1520498340.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T08:39:00.378Z,1520498340.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:00.780Z,1520498340.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T08:39:00.781Z,1520498340.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:01.186Z,1520498341.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T08:39:01.187Z,1520498341.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:01.576Z,1520498341.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T08:39:01.577Z,1520498341.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:01.982Z,1520498341.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T08:39:01.983Z,1520498341.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:02.370Z,1520498342.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T08:39:02.371Z,1520498342.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:02.785Z,1520498342.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T08:39:02.786Z,1520498342.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:03.187Z,1520498343.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T08:39:03.188Z,1520498343.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:03.586Z,1520498343.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T08:39:03.587Z,1520498343.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:03.970Z,1520498343.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T08:39:03.971Z,1520498343.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:04.372Z,1520498344.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T08:39:04.373Z,1520498344.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:04.778Z,1520498344.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T08:39:04.779Z,1520498344.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:05.172Z,1520498345.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T08:39:05.173Z,1520498345.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:05.571Z,1520498345.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T08:39:05.572Z,1520498345.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:05.982Z,1520498345.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T08:39:05.983Z,1520498345.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:06.394Z,1520498346.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T08:39:06.395Z,1520498346.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:06.781Z,1520498346.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T08:39:06.782Z,1520498346.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:07.174Z,1520498347.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T08:39:07.175Z,1520498347.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:07.574Z,1520498347.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T08:39:07.575Z,1520498347.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:07.971Z,1520498347.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T08:39:07.973Z,1520498347.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:08.376Z,1520498348.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T08:39:08.377Z,1520498348.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:08.776Z,1520498348.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T08:39:08.777Z,1520498348.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:09.183Z,1520498349.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T08:39:09.184Z,1520498349.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:09.587Z,1520498349.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T08:39:09.588Z,1520498349.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:09.973Z,1520498349.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T08:39:09.974Z,1520498349.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:10.375Z,1520498350.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T08:39:10.376Z,1520498350.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:10.772Z,1520498350.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T08:39:10.773Z,1520498350.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:11.173Z,1520498351.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T08:39:11.174Z,1520498351.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:11.578Z,1520498351.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T08:39:11.579Z,1520498351.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:11.986Z,1520498351.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T08:39:11.987Z,1520498351.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:12.387Z,1520498352.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T08:39:12.388Z,1520498352.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:12.779Z,1520498352.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T08:39:12.780Z,1520498352.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:13.178Z,1520498353.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T08:39:13.179Z,1520498353.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:13.572Z,1520498353.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T08:39:13.573Z,1520498353.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:13.986Z,1520498353.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T08:39:13.987Z,1520498353.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:14.397Z,1520498354.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T08:39:14.398Z,1520498354.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:14.776Z,1520498354.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T08:39:14.777Z,1520498354.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:15.180Z,1520498355.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T08:39:15.185Z,1520498355.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:15.583Z,1520498355.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:15.974Z,1520498355.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:16.378Z,1520498356.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:16.771Z,1520498356.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:17.185Z,1520498357.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:17.574Z,1520498357.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:17.983Z,1520498357.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:18.380Z,1520498358.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:18.791Z,1520498358.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:19.181Z,1520498359.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:19.559Z,1520498359.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:19.985Z,1520498359.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:20.386Z,1520498360.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:20.785Z,1520498360.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:21.188Z,1520498361.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:21.589Z,1520498361.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:21.982Z,1520498361.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:22.381Z,1520498362.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:22.784Z,1520498362.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:23.175Z,1520498363.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:23.591Z,1520498363.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:23.998Z,1520498363.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:24.398Z,1520498364.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:24.773Z,1520498364.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:25.198Z,1520498365.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:25.598Z,1520498365.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:25.974Z,1520498365.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:26.370Z,1520498366.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:26.775Z,1520498366.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:27.199Z,1520498367.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:27.578Z,1520498367.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:27.974Z,1520498367.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:28.382Z,1520498368.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:28.798Z,1520498368.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:29.175Z,1520498369.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:29.572Z,1520498369.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:29.983Z,1520498369.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:30.379Z,1520498370.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:30.782Z,1520498370.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:31.178Z,1520498371.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:31.575Z,1520498371.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:31.969Z,1520498371.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:32.378Z,1520498372.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:32.775Z,1520498372.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:33.178Z,1520498373.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:33.582Z,1520498373.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:33.978Z,1520498373.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:34.373Z,1520498374.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:34.786Z,1520498374.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:35.271Z,1520498375.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:35.564Z,1520498375.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:35.982Z,1520498375.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:36.380Z,1520498376.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:36.777Z,1520498376.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:37.172Z,1520498377.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:40.268Z,1520498380.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:40.386Z,1520498380.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:40.768Z,1520498380.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:41.168Z,1520498381.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:41.549Z,1520498381.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:41.947Z,1520498381.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:42.346Z,1520498382.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:42.751Z,1520498382.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:43.141Z,1520498383.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:43.547Z,1520498383.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:43.948Z,1520498383.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:44.371Z,1520498384.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:44.743Z,1520498384.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:45.132Z,1520498385.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:45.545Z,1520498385.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:45.952Z,1520498385.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:46.349Z,1520498386.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:46.769Z,1520498386.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:47.151Z,1520498387.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:47.570Z,1520498387.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:47.941Z,1520498387.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:48.346Z,1520498388.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:48.741Z,1520498388.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:49.146Z,1520498389.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:49.542Z,1520498389.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:49.949Z,1520498389.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:50.354Z,1520498390.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:50.775Z,1520498390.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:51.149Z,1520498391.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:51.546Z,1520498391.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:51.947Z,1520498391.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:52.363Z,1520498392.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:52.756Z,1520498392.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:53.155Z,1520498393.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:53.551Z,1520498393.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:53.963Z,1520498393.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:54.342Z,1520498394.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:54.751Z,1520498394.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:55.147Z,1520498395.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:55.551Z,1520498395.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:55.945Z,1520498395.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:56.363Z,1520498396.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:56.755Z,1520498396.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:57.155Z,1520498397.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:57.549Z,1520498397.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:57.948Z,1520498397.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:58.347Z,1520498398.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:58.775Z,1520498398.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:59.158Z,1520498399.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:59.556Z,1520498399.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:39:59.948Z,1520498399.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:00.348Z,1520498400.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:00.757Z,1520498400.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:01.149Z,1520498401.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:01.546Z,1520498401.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:01.968Z,1520498401.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:02.360Z,1520498402.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:02.757Z,1520498402.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:03.153Z,1520498403.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:03.555Z,1520498403.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:03.948Z,1520498403.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:04.351Z,1520498404.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:04.753Z,1520498404.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:05.168Z,1520498405.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:05.565Z,1520498405.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:05.948Z,1520498405.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:06.345Z,1520498406.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:06.727Z,1520498406.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:07.130Z,1520498407.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:07.528Z,1520498407.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:07.966Z,1520498407.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:08.368Z,1520498408.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:08.765Z,1520498408.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:09.130Z,1520498409.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:09.539Z,1520498409.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:09.939Z,1520498409.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:10.338Z,1520498410.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:10.765Z,1520498410.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:11.172Z,1520498411.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:11.570Z,1520498411.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:11.938Z,1520498411.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:12.342Z,1520498412.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:12.741Z,1520498412.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:13.145Z,1520498413.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:13.541Z,1520498413.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:13.955Z,1520498413.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:14.351Z,1520498414.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:14.777Z,1520498414.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:15.135Z,1520498415.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:15.546Z,1520498415.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:15.946Z,1520498415.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:16.375Z,1520498416.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:16.751Z,1520498416.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:17.152Z,1520498417.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:17.548Z,1520498417.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:17.975Z,1520498417.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:18.338Z,1520498418.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:18.737Z,1520498418.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:19.146Z,1520498419.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:19.557Z,1520498419.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:19.951Z,1520498419.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:20.353Z,1520498420.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:20.758Z,1520498420.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:21.175Z,1520498421.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:21.543Z,1520498421.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:21.948Z,1520498421.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:22.344Z,1520498422.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:22.773Z,1520498422.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:23.160Z,1520498423.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:23.550Z,1520498423.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:23.950Z,1520498423.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:24.342Z,1520498424.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:24.741Z,1520498424.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:25.151Z,1520498425.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:25.547Z,1520498425.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:25.981Z,1520498425.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:26.360Z,1520498426.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:26.757Z,1520498426.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:27.146Z,1520498427.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:27.539Z,1520498427.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:27.956Z,1520498427.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:28.348Z,1520498428.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:28.759Z,1520498428.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:29.180Z,1520498429.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:29.558Z,1520498429.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:29.948Z,1520498429.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:30.345Z,1520498430.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:30.750Z,1520498430.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:31.141Z,1520498431.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:31.557Z,1520498431.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:31.957Z,1520498431.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:32.371Z,1520498432.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:32.758Z,1520498432.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:33.153Z,1520498433.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:33.562Z,1520498433.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:33.945Z,1520498433.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:34.358Z,1520498434.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:34.759Z,1520498434.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:35.161Z,1520498435.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:35.563Z,1520498435.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:35.957Z,1520498435.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:36.356Z,1520498436.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:36.761Z,1520498436.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:37.137Z,1520498437.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:37.539Z,1520498437.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:40.674Z,1520498440.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:40.800Z,1520498440.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:41.169Z,1520498441.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:41.546Z,1520498441.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:41.974Z,1520498441.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:42.341Z,1520498442.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:42.751Z,1520498442.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:43.168Z,1520498443.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:43.569Z,1520498443.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:43.940Z,1520498443.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:44.351Z,1520498444.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:44.750Z,1520498444.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:45.174Z,1520498445.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:45.550Z,1520498445.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:45.974Z,1520498445.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:46.373Z,1520498446.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:46.774Z,1520498446.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:47.141Z,1520498447.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:47.547Z,1520498447.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:47.949Z,1520498447.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:48.356Z,1520498448.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:48.756Z,1520498448.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:49.156Z,1520498449.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:49.574Z,1520498449.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:49.969Z,1520498449.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:50.350Z,1520498450.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:50.751Z,1520498450.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:51.155Z,1520498451.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:51.583Z,1520498451.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:51.972Z,1520498451.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:52.373Z,1520498452.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:52.751Z,1520498452.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:53.156Z,1520498453.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:53.556Z,1520498453.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:53.951Z,1520498453.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:54.350Z,1520498454.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:54.778Z,1520498454.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:55.168Z,1520498455.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:55.567Z,1520498455.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:55.974Z,1520498455.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:56.375Z,1520498456.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:56.749Z,1520498456.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:57.153Z,1520498457.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:57.558Z,1520498457.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:57.982Z,1520498457.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:58.361Z,1520498458.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:58.758Z,1520498458.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:59.154Z,1520498459.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:59.576Z,1520498459.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:40:59.956Z,1520498459.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:00.355Z,1520498460.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:00.759Z,1520498460.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:01.182Z,1520498461.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:01.560Z,1520498461.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:01.953Z,1520498461.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:02.355Z,1520498462.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:02.775Z,1520498462.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:03.151Z,1520498463.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:03.549Z,1520498463.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:03.959Z,1520498463.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:04.379Z,1520498464.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:04.760Z,1520498464.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:05.155Z,1520498465.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:05.551Z,1520498465.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:05.975Z,1520498465.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:06.346Z,1520498466.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:06.760Z,1520498466.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:07.159Z,1520498467.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:07.577Z,1520498467.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:07.958Z,1520498467.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:08.351Z,1520498468.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:08.753Z,1520498468.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:09.175Z,1520498469.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:09.546Z,1520498469.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:09.959Z,1520498469.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:10.359Z,1520498470.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:10.776Z,1520498470.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:11.145Z,1520498471.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:11.554Z,1520498471.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:11.952Z,1520498471.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:12.378Z,1520498472.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:12.759Z,1520498472.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:13.159Z,1520498473.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:13.559Z,1520498473.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:13.975Z,1520498473.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:14.358Z,1520498474.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:14.756Z,1520498474.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:15.154Z,1520498475.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:15.576Z,1520498475.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:15.961Z,1520498475.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:16.360Z,1520498476.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:16.759Z,1520498476.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:17.177Z,1520498477.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:17.544Z,1520498477.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:17.955Z,1520498477.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:18.355Z,1520498478.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:18.775Z,1520498478.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:19.182Z,1520498479.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:19.560Z,1520498479.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:19.946Z,1520498479.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:20.376Z,1520498480.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:20.748Z,1520498480.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:21.146Z,1520498481.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:21.548Z,1520498481.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:21.981Z,1520498481.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:22.358Z,1520498482.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:22.757Z,1520498482.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:23.153Z,1520498483.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:23.563Z,1520498483.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:23.956Z,1520498483.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:24.354Z,1520498484.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:24.755Z,1520498484.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:25.179Z,1520498485.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:25.560Z,1520498485.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:25.953Z,1520498485.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:26.349Z,1520498486.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:26.777Z,1520498486.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:27.143Z,1520498487.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:27.550Z,1520498487.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:27.959Z,1520498487.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:28.375Z,1520498488.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:28.759Z,1520498488.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:29.154Z,1520498489.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:29.547Z,1520498489.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:29.974Z,1520498489.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:30.355Z,1520498490.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:30.758Z,1520498490.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:31.159Z,1520498491.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:31.577Z,1520498491.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:31.955Z,1520498491.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:32.354Z,1520498492.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:32.752Z,1520498492.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:33.174Z,1520498493.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:33.555Z,1520498493.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:33.959Z,1520498493.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:34.358Z,1520498494.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:34.782Z,1520498494.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:35.156Z,1520498495.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:35.553Z,1520498495.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:35.951Z,1520498495.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:36.356Z,1520498496.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:36.779Z,1520498496.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:37.182Z,1520498497.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:37.583Z,1520498497.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:40.649Z,1520498500.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:40.662Z,1520498500.662 [CBIT](INFO): Clearing failed state for component DropWeight
2018-03-08T08:41:40.662Z,1520498500.662 [DropWeight] No Fault, FailCount= 1
2018-03-08T08:41:40.663Z,1520498500.663 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T08:41:40.759Z,1520498500.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:41.155Z,1520498501.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:41.534Z,1520498501.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:41.942Z,1520498501.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:42.315Z,1520498502.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:42.717Z,1520498502.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:43.112Z,1520498503.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:43.518Z,1520498503.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:43.947Z,1520498503.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:44.340Z,1520498504.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:44.744Z,1520498504.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:45.114Z,1520498505.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:45.519Z,1520498505.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:45.919Z,1520498505.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:46.319Z,1520498506.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:46.751Z,1520498506.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:47.149Z,1520498507.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:47.546Z,1520498507.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:47.922Z,1520498507.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:48.319Z,1520498508.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:48.715Z,1520498508.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:49.120Z,1520498509.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:49.517Z,1520498509.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:49.924Z,1520498509.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:50.348Z,1520498510.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:50.724Z,1520498510.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:51.119Z,1520498511.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:51.520Z,1520498511.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:51.936Z,1520498511.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:52.323Z,1520498512.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:52.729Z,1520498512.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:53.127Z,1520498513.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:53.531Z,1520498513.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:53.950Z,1520498513.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:54.323Z,1520498514.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:54.723Z,1520498514.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:55.116Z,1520498515.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:55.518Z,1520498515.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:55.928Z,1520498515.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:56.327Z,1520498516.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:56.731Z,1520498516.731 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:56.732Z,1520498516.732 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20
2018-03-08T08:41:56.732Z,1520498516.732 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T08:41:56.735Z,1520498516.735 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:56.735Z,1520498516.735 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-03-08T08:41:56.736Z,1520498516.736 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T08:41:56.754Z,1520498516.754 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:56.754Z,1520498516.754 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-03-08T08:41:56.754Z,1520498516.754 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T08:41:56.778Z,1520498516.778 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T08:41:56.778Z,1520498516.778 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T08:41:56.778Z,1520498516.778 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T08:41:57.132Z,1520498517.132 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T08:41:57.132Z,1520498517.132 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20
2018-03-08T08:41:57.133Z,1520498517.133 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T08:41:57.133Z,1520498517.133 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-03-08T08:41:57.133Z,1520498517.133 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T08:41:57.133Z,1520498517.133 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-03-08T08:41:57.524Z,1520498517.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T08:41:57.525Z,1520498517.525 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:41:57.525Z,1520498517.525 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:41:57.525Z,1520498517.525 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T08:41:57.526Z,1520498517.526 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:41:57.526Z,1520498517.526 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:41:57.526Z,1520498517.526 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T08:41:57.527Z,1520498517.527 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:41:57.527Z,1520498517.527 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:41:57.925Z,1520498517.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T08:41:57.926Z,1520498517.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:58.324Z,1520498518.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T08:41:58.325Z,1520498518.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:58.725Z,1520498518.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T08:41:58.726Z,1520498518.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:59.135Z,1520498519.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T08:41:59.136Z,1520498519.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:59.531Z,1520498519.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T08:41:59.532Z,1520498519.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:41:59.919Z,1520498519.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T08:41:59.920Z,1520498519.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:00.329Z,1520498520.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T08:42:00.330Z,1520498520.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:00.733Z,1520498520.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T08:42:00.734Z,1520498520.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:01.128Z,1520498521.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T08:42:01.129Z,1520498521.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:01.533Z,1520498521.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T08:42:01.535Z,1520498521.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:01.933Z,1520498521.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T08:42:01.934Z,1520498521.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:02.333Z,1520498522.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T08:42:02.334Z,1520498522.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:02.741Z,1520498522.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T08:42:02.742Z,1520498522.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:03.135Z,1520498523.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T08:42:03.136Z,1520498523.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:03.503Z,1520498523.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T08:42:03.504Z,1520498523.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:03.930Z,1520498523.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T08:42:03.931Z,1520498523.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:04.341Z,1520498524.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T08:42:04.343Z,1520498524.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:04.716Z,1520498524.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T08:42:04.737Z,1520498524.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:05.146Z,1520498525.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T08:42:05.147Z,1520498525.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:05.541Z,1520498525.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T08:42:05.542Z,1520498525.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:05.914Z,1520498525.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T08:42:05.915Z,1520498525.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:06.322Z,1520498526.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T08:42:06.323Z,1520498526.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:06.718Z,1520498526.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T08:42:06.719Z,1520498526.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:07.115Z,1520498527.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T08:42:07.116Z,1520498527.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:07.519Z,1520498527.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T08:42:07.519Z,1520498527.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:07.951Z,1520498527.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T08:42:07.952Z,1520498527.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:08.349Z,1520498528.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T08:42:08.350Z,1520498528.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:08.720Z,1520498528.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T08:42:08.721Z,1520498528.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:09.119Z,1520498529.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T08:42:09.119Z,1520498529.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:09.515Z,1520498529.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T08:42:09.516Z,1520498529.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:09.922Z,1520498529.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T08:42:09.923Z,1520498529.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:10.322Z,1520498530.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T08:42:10.323Z,1520498530.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:10.730Z,1520498530.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T08:42:10.731Z,1520498530.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:11.130Z,1520498531.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T08:42:11.131Z,1520498531.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:11.527Z,1520498531.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T08:42:11.528Z,1520498531.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:11.917Z,1520498531.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T08:42:11.918Z,1520498531.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:12.322Z,1520498532.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T08:42:12.323Z,1520498532.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:12.719Z,1520498532.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T08:42:12.720Z,1520498532.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:13.117Z,1520498533.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T08:42:13.118Z,1520498533.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:13.520Z,1520498533.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T08:42:13.525Z,1520498533.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:13.932Z,1520498533.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T08:42:13.933Z,1520498533.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:14.336Z,1520498534.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T08:42:14.337Z,1520498534.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:14.731Z,1520498534.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T08:42:14.732Z,1520498534.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:15.123Z,1520498535.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T08:42:15.124Z,1520498535.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:15.516Z,1520498535.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T08:42:15.517Z,1520498535.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:15.930Z,1520498535.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T08:42:15.931Z,1520498535.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:16.321Z,1520498536.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T08:42:16.322Z,1520498536.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:16.727Z,1520498536.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T08:42:16.728Z,1520498536.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:17.163Z,1520498537.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:17.537Z,1520498537.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:17.920Z,1520498537.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:18.325Z,1520498538.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:18.721Z,1520498538.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:19.137Z,1520498539.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:19.523Z,1520498539.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:19.933Z,1520498539.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:20.332Z,1520498540.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:20.733Z,1520498540.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:21.120Z,1520498541.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:21.525Z,1520498541.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:21.914Z,1520498541.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:22.310Z,1520498542.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:22.720Z,1520498542.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:23.124Z,1520498543.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:23.545Z,1520498543.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:23.910Z,1520498543.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:24.311Z,1520498544.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:24.714Z,1520498544.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:25.112Z,1520498545.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:25.522Z,1520498545.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:25.928Z,1520498545.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:26.331Z,1520498546.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:26.734Z,1520498546.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:27.122Z,1520498547.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:27.526Z,1520498547.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:27.923Z,1520498547.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:28.319Z,1520498548.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:28.745Z,1520498548.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:29.135Z,1520498549.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:29.537Z,1520498549.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:29.919Z,1520498549.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:30.326Z,1520498550.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:30.727Z,1520498550.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:31.126Z,1520498551.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:31.523Z,1520498551.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:31.942Z,1520498551.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:32.338Z,1520498552.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:32.738Z,1520498552.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:33.126Z,1520498553.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:33.519Z,1520498553.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:33.929Z,1520498553.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:34.330Z,1520498554.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:34.735Z,1520498554.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:35.140Z,1520498555.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:35.533Z,1520498555.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:35.907Z,1520498555.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:36.311Z,1520498556.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:36.714Z,1520498556.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:37.114Z,1520498557.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:37.117Z,1520498557.117 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T08:42:37.118Z,1520498557.118 [Default:CheckIn:C.Wait] Stopped
2018-03-08T08:42:37.118Z,1520498557.118 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T08:42:37.118Z,1520498557.118 [Default:CheckIn:D] Running Loop=1
2018-03-08T08:42:37.515Z,1520498557.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:37.518Z,1520498557.518 [Default:CheckIn:D] Stopped
2018-03-08T08:42:37.518Z,1520498557.518 [Default:CheckIn:E] Running Loop=1
2018-03-08T08:42:37.928Z,1520498557.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:37.946Z,1520498557.946 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 56.878548 min 
2018-03-08T08:42:37.946Z,1520498557.946 [Default:CheckIn:E] Stopped
2018-03-08T08:42:37.946Z,1520498557.946 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T08:42:37.947Z,1520498557.947 [Default:CheckIn] Stopped
2018-03-08T08:42:37.947Z,1520498557.947 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T08:42:37.947Z,1520498557.947 [Default:CheckIn](INFO): Running loop #6
2018-03-08T08:42:37.947Z,1520498557.947 [Default:CheckIn] Running Loop=6
2018-03-08T08:42:37.947Z,1520498557.947 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T08:42:37.947Z,1520498557.947 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T08:42:41.047Z,1520498561.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:41.183Z,1520498561.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:41.550Z,1520498561.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:41.919Z,1520498561.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:42.327Z,1520498562.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:42.723Z,1520498562.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:43.123Z,1520498563.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:43.530Z,1520498563.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:43.922Z,1520498563.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:44.318Z,1520498564.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:44.725Z,1520498564.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:45.127Z,1520498565.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:45.522Z,1520498565.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:45.926Z,1520498565.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:46.338Z,1520498566.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:46.733Z,1520498566.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:47.107Z,1520498567.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:47.530Z,1520498567.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:47.915Z,1520498567.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:48.338Z,1520498568.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:48.743Z,1520498568.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:49.151Z,1520498569.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:49.524Z,1520498569.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:49.915Z,1520498569.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:50.315Z,1520498570.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:50.723Z,1520498570.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:51.123Z,1520498571.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:51.520Z,1520498571.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:51.923Z,1520498571.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:52.329Z,1520498572.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:52.725Z,1520498572.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:53.114Z,1520498573.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:53.523Z,1520498573.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:53.919Z,1520498573.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:54.321Z,1520498574.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:54.725Z,1520498574.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:55.123Z,1520498575.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:55.524Z,1520498575.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:55.917Z,1520498575.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:56.321Z,1520498576.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:56.716Z,1520498576.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:57.119Z,1520498577.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:57.518Z,1520498577.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:57.926Z,1520498577.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:58.328Z,1520498578.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:58.730Z,1520498578.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:59.122Z,1520498579.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:59.520Z,1520498579.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:42:59.919Z,1520498579.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:00.322Z,1520498580.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:00.729Z,1520498580.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:01.127Z,1520498581.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:01.529Z,1520498581.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:01.922Z,1520498581.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:02.319Z,1520498582.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:02.719Z,1520498582.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:03.127Z,1520498583.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:03.521Z,1520498583.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:03.932Z,1520498583.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:04.342Z,1520498584.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:04.732Z,1520498584.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:05.120Z,1520498585.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:05.528Z,1520498585.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:05.925Z,1520498585.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:06.324Z,1520498586.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:06.729Z,1520498586.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:07.154Z,1520498587.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:07.538Z,1520498587.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:07.928Z,1520498587.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:08.333Z,1520498588.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:08.708Z,1520498588.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:09.135Z,1520498589.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:09.510Z,1520498589.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:09.940Z,1520498589.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:10.345Z,1520498590.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:10.739Z,1520498590.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:11.115Z,1520498591.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:11.519Z,1520498591.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:11.919Z,1520498591.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:12.318Z,1520498592.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:12.746Z,1520498592.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:13.127Z,1520498593.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:13.520Z,1520498593.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:13.917Z,1520498593.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:14.322Z,1520498594.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:14.720Z,1520498594.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:15.128Z,1520498595.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:15.521Z,1520498595.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:15.923Z,1520498595.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:16.324Z,1520498596.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:16.735Z,1520498596.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:17.113Z,1520498597.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:17.523Z,1520498597.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:17.919Z,1520498597.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:18.318Z,1520498598.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:18.724Z,1520498598.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:19.127Z,1520498599.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:19.530Z,1520498599.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:19.922Z,1520498599.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:20.319Z,1520498600.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:20.717Z,1520498600.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:21.122Z,1520498601.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:21.525Z,1520498601.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:21.930Z,1520498601.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:22.332Z,1520498602.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:22.732Z,1520498602.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:23.135Z,1520498603.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:23.519Z,1520498603.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:23.929Z,1520498603.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:24.320Z,1520498604.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:24.732Z,1520498604.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:25.136Z,1520498605.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:25.529Z,1520498605.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:25.926Z,1520498605.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:26.321Z,1520498606.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:26.723Z,1520498606.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:27.124Z,1520498607.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:27.534Z,1520498607.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:27.925Z,1520498607.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:28.341Z,1520498608.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:28.733Z,1520498608.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:29.149Z,1520498609.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:29.524Z,1520498609.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:29.926Z,1520498609.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:30.329Z,1520498610.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:30.731Z,1520498610.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:31.148Z,1520498611.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:31.533Z,1520498611.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:31.926Z,1520498611.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:32.326Z,1520498612.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:32.733Z,1520498612.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:33.122Z,1520498613.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:33.534Z,1520498613.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:33.933Z,1520498613.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:34.342Z,1520498614.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:34.741Z,1520498614.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:35.134Z,1520498615.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:35.517Z,1520498615.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:35.919Z,1520498615.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:36.318Z,1520498616.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:36.728Z,1520498616.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:37.132Z,1520498617.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:37.523Z,1520498617.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:37.926Z,1520498617.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:38.323Z,1520498618.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:41.423Z,1520498621.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:41.560Z,1520498621.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:41.923Z,1520498621.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:42.321Z,1520498622.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:42.723Z,1520498622.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:43.111Z,1520498623.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:43.515Z,1520498623.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:43.914Z,1520498623.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:44.319Z,1520498624.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:44.728Z,1520498624.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:45.128Z,1520498625.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:45.535Z,1520498625.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:45.916Z,1520498625.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:46.317Z,1520498626.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:46.715Z,1520498626.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:47.115Z,1520498627.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:47.522Z,1520498627.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:47.921Z,1520498627.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:48.327Z,1520498628.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:48.735Z,1520498628.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:49.125Z,1520498629.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:49.498Z,1520498629.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:49.903Z,1520498629.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:50.306Z,1520498630.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:50.733Z,1520498630.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:51.130Z,1520498631.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:51.531Z,1520498631.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:51.910Z,1520498631.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:52.314Z,1520498632.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:52.711Z,1520498632.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:53.111Z,1520498633.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:53.511Z,1520498633.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:53.911Z,1520498633.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:54.312Z,1520498634.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:54.740Z,1520498634.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:55.109Z,1520498635.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:55.506Z,1520498635.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:55.912Z,1520498635.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:56.305Z,1520498636.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:56.740Z,1520498636.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:57.141Z,1520498637.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:57.518Z,1520498637.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:57.911Z,1520498637.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:58.311Z,1520498638.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:58.710Z,1520498638.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:59.111Z,1520498639.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:59.509Z,1520498639.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:43:59.918Z,1520498639.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:00.312Z,1520498640.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:00.716Z,1520498640.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:01.110Z,1520498641.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:01.510Z,1520498641.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:01.912Z,1520498641.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:02.310Z,1520498642.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:02.724Z,1520498642.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:03.120Z,1520498643.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:03.522Z,1520498643.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:03.909Z,1520498643.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:04.314Z,1520498644.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:04.714Z,1520498644.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:05.115Z,1520498645.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:05.511Z,1520498645.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:05.916Z,1520498645.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:06.316Z,1520498646.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:06.727Z,1520498646.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:07.113Z,1520498647.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:07.515Z,1520498647.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:07.912Z,1520498647.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:08.310Z,1520498648.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:08.721Z,1520498648.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:09.121Z,1520498649.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:09.527Z,1520498649.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:09.919Z,1520498649.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:10.319Z,1520498650.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:10.713Z,1520498650.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:11.116Z,1520498651.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:11.518Z,1520498651.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:11.919Z,1520498651.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:12.320Z,1520498652.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:12.719Z,1520498652.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:13.113Z,1520498653.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:13.516Z,1520498653.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:13.912Z,1520498653.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:14.310Z,1520498654.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:14.727Z,1520498654.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:15.120Z,1520498655.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:15.519Z,1520498655.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:15.916Z,1520498655.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:16.315Z,1520498656.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:16.714Z,1520498656.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:17.112Z,1520498657.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:17.511Z,1520498657.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:17.915Z,1520498657.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:18.321Z,1520498658.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:18.719Z,1520498658.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:19.114Z,1520498659.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:19.515Z,1520498659.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:19.912Z,1520498659.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:20.314Z,1520498660.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:20.727Z,1520498660.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:21.120Z,1520498661.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:21.526Z,1520498661.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:21.916Z,1520498661.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:22.318Z,1520498662.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:22.714Z,1520498662.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:23.117Z,1520498663.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:23.511Z,1520498663.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:23.921Z,1520498663.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:24.326Z,1520498664.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:24.730Z,1520498664.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:25.114Z,1520498665.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:25.511Z,1520498665.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:25.923Z,1520498665.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:26.315Z,1520498666.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:26.722Z,1520498666.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:27.126Z,1520498667.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:27.525Z,1520498667.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:27.913Z,1520498667.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:28.322Z,1520498668.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:28.716Z,1520498668.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:29.119Z,1520498669.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:29.523Z,1520498669.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:29.923Z,1520498669.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:30.333Z,1520498670.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:30.725Z,1520498670.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:31.118Z,1520498671.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:31.507Z,1520498671.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:31.919Z,1520498671.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:32.321Z,1520498672.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:32.731Z,1520498672.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:33.128Z,1520498673.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:33.535Z,1520498673.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:33.895Z,1520498673.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:34.327Z,1520498674.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:34.705Z,1520498674.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:35.111Z,1520498675.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:35.515Z,1520498675.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:35.939Z,1520498675.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:36.320Z,1520498676.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:36.724Z,1520498676.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:37.112Z,1520498677.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:37.509Z,1520498677.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:37.918Z,1520498677.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:38.313Z,1520498678.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:38.720Z,1520498678.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:41.829Z,1520498681.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:41.974Z,1520498681.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:42.361Z,1520498682.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:42.757Z,1520498682.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:43.139Z,1520498683.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:43.530Z,1520498683.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:43.969Z,1520498683.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:44.366Z,1520498684.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:44.765Z,1520498684.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:45.167Z,1520498685.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:45.530Z,1520498685.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:45.947Z,1520498685.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:46.341Z,1520498686.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:46.740Z,1520498686.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:47.139Z,1520498687.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:47.565Z,1520498687.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:47.942Z,1520498687.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:48.339Z,1520498688.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:48.737Z,1520498688.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:49.141Z,1520498689.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:49.542Z,1520498689.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:49.941Z,1520498689.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:50.339Z,1520498690.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:50.750Z,1520498690.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:51.147Z,1520498691.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:51.537Z,1520498691.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:51.935Z,1520498691.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:52.334Z,1520498692.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:52.744Z,1520498692.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:53.144Z,1520498693.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:53.541Z,1520498693.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:53.940Z,1520498693.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:54.341Z,1520498694.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:54.737Z,1520498694.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:55.130Z,1520498695.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:55.534Z,1520498695.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:55.945Z,1520498695.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:56.371Z,1520498696.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:56.747Z,1520498696.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:57.147Z,1520498697.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:57.541Z,1520498697.541 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:57.542Z,1520498697.542 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21
2018-03-08T08:44:57.542Z,1520498697.542 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T08:44:57.543Z,1520498697.543 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:57.543Z,1520498697.543 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21
2018-03-08T08:44:57.543Z,1520498697.543 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T08:44:57.545Z,1520498697.545 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:57.545Z,1520498697.545 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 21
2018-03-08T08:44:57.545Z,1520498697.545 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T08:44:57.581Z,1520498697.581 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T08:44:57.581Z,1520498697.581 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T08:44:57.581Z,1520498697.581 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T08:44:57.959Z,1520498697.959 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T08:44:57.959Z,1520498697.959 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21
2018-03-08T08:44:57.960Z,1520498697.960 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T08:44:57.961Z,1520498697.961 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21
2018-03-08T08:44:57.961Z,1520498697.961 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T08:44:57.962Z,1520498697.962 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 21
2018-03-08T08:44:58.339Z,1520498698.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T08:44:58.339Z,1520498698.339 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:44:58.340Z,1520498698.340 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:44:58.340Z,1520498698.340 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T08:44:58.341Z,1520498698.341 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:44:58.341Z,1520498698.341 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:44:58.341Z,1520498698.341 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T08:44:58.342Z,1520498698.342 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:44:58.342Z,1520498698.342 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:44:58.755Z,1520498698.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T08:44:58.756Z,1520498698.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:59.156Z,1520498699.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T08:44:59.157Z,1520498699.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:59.569Z,1520498699.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T08:44:59.570Z,1520498699.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:44:59.945Z,1520498699.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T08:44:59.946Z,1520498699.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:00.356Z,1520498700.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T08:45:00.357Z,1520498700.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:00.753Z,1520498700.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T08:45:00.754Z,1520498700.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:01.126Z,1520498701.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T08:45:01.127Z,1520498701.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:01.558Z,1520498701.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T08:45:01.559Z,1520498701.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:01.966Z,1520498701.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T08:45:01.967Z,1520498701.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:02.358Z,1520498702.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T08:45:02.359Z,1520498702.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:02.774Z,1520498702.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T08:45:02.775Z,1520498702.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:03.152Z,1520498703.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T08:45:03.157Z,1520498703.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:03.554Z,1520498703.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T08:45:03.555Z,1520498703.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:03.934Z,1520498703.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T08:45:03.936Z,1520498703.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:04.333Z,1520498704.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T08:45:04.334Z,1520498704.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:04.741Z,1520498704.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T08:45:04.742Z,1520498704.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:05.166Z,1520498705.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T08:45:05.167Z,1520498705.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:05.550Z,1520498705.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T08:45:05.551Z,1520498705.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:05.937Z,1520498705.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T08:45:05.938Z,1520498705.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:06.336Z,1520498706.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T08:45:06.337Z,1520498706.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:06.754Z,1520498706.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T08:45:06.754Z,1520498706.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:07.143Z,1520498707.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T08:45:07.144Z,1520498707.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:07.546Z,1520498707.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T08:45:07.547Z,1520498707.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:07.943Z,1520498707.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T08:45:07.944Z,1520498707.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:08.349Z,1520498708.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T08:45:08.350Z,1520498708.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:08.770Z,1520498708.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T08:45:08.771Z,1520498708.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:09.150Z,1520498709.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T08:45:09.151Z,1520498709.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:09.538Z,1520498709.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T08:45:09.539Z,1520498709.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:09.934Z,1520498709.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T08:45:09.935Z,1520498709.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:10.342Z,1520498710.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T08:45:10.343Z,1520498710.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:10.743Z,1520498710.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T08:45:10.744Z,1520498710.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:11.154Z,1520498711.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T08:45:11.156Z,1520498711.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:11.544Z,1520498711.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T08:45:11.546Z,1520498711.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:11.939Z,1520498711.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T08:45:11.939Z,1520498711.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:12.335Z,1520498712.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T08:45:12.336Z,1520498712.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:12.734Z,1520498712.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T08:45:12.735Z,1520498712.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:13.130Z,1520498713.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T08:45:13.131Z,1520498713.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:13.539Z,1520498713.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T08:45:13.540Z,1520498713.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:13.943Z,1520498713.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T08:45:13.944Z,1520498713.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:14.343Z,1520498714.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T08:45:14.344Z,1520498714.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:14.751Z,1520498714.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T08:45:14.752Z,1520498714.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:15.143Z,1520498715.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T08:45:15.143Z,1520498715.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:15.533Z,1520498715.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T08:45:15.534Z,1520498715.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:15.935Z,1520498715.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T08:45:15.936Z,1520498715.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:16.341Z,1520498716.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T08:45:16.342Z,1520498716.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:16.747Z,1520498716.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T08:45:16.749Z,1520498716.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:17.171Z,1520498717.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T08:45:17.172Z,1520498717.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:17.539Z,1520498717.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T08:45:17.540Z,1520498717.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:17.939Z,1520498717.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:18.343Z,1520498718.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:18.734Z,1520498718.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:19.142Z,1520498719.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:19.534Z,1520498719.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:19.948Z,1520498719.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:20.372Z,1520498720.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:20.755Z,1520498720.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:21.135Z,1520498721.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:21.539Z,1520498721.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:21.937Z,1520498721.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:22.342Z,1520498722.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:22.749Z,1520498722.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:23.155Z,1520498723.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:23.574Z,1520498723.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:23.947Z,1520498723.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:24.348Z,1520498724.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:24.740Z,1520498724.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:25.140Z,1520498725.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:25.542Z,1520498725.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:25.959Z,1520498725.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:26.355Z,1520498726.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:26.776Z,1520498726.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:27.139Z,1520498727.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:27.547Z,1520498727.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:27.944Z,1520498727.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:28.343Z,1520498728.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:28.748Z,1520498728.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:29.162Z,1520498729.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:29.545Z,1520498729.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:29.955Z,1520498729.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:30.346Z,1520498730.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:30.732Z,1520498730.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:31.145Z,1520498731.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:31.542Z,1520498731.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:31.962Z,1520498731.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:32.357Z,1520498732.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:32.757Z,1520498732.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:33.146Z,1520498733.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:33.545Z,1520498733.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:33.951Z,1520498733.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:34.343Z,1520498734.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:34.755Z,1520498734.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:35.159Z,1520498735.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:35.560Z,1520498735.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:35.953Z,1520498735.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:36.326Z,1520498736.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:36.761Z,1520498736.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:37.127Z,1520498737.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:37.536Z,1520498737.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:37.968Z,1520498737.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:38.344Z,1520498738.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:38.744Z,1520498738.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:41.839Z,1520498741.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:41.971Z,1520498741.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:42.374Z,1520498742.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:42.769Z,1520498742.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:43.172Z,1520498743.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:43.535Z,1520498743.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:43.942Z,1520498743.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:44.343Z,1520498744.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:44.741Z,1520498744.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:45.146Z,1520498745.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:45.545Z,1520498745.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:45.943Z,1520498745.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:46.369Z,1520498746.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:46.731Z,1520498746.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:47.146Z,1520498747.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:47.554Z,1520498747.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:47.953Z,1520498747.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:48.357Z,1520498748.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:48.759Z,1520498748.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:49.162Z,1520498749.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:49.540Z,1520498749.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:49.947Z,1520498749.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:50.342Z,1520498750.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:50.754Z,1520498750.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:51.147Z,1520498751.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:51.553Z,1520498751.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:51.953Z,1520498751.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:52.346Z,1520498752.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:52.738Z,1520498752.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:53.154Z,1520498753.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:53.554Z,1520498753.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:53.953Z,1520498753.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:54.353Z,1520498754.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:54.758Z,1520498754.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:55.154Z,1520498755.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:55.531Z,1520498755.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:55.935Z,1520498755.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:56.333Z,1520498756.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:56.760Z,1520498756.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:57.170Z,1520498757.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:57.540Z,1520498757.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:57.935Z,1520498757.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:58.340Z,1520498758.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:58.735Z,1520498758.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:59.136Z,1520498759.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:59.535Z,1520498759.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:45:59.959Z,1520498759.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:00.369Z,1520498760.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:00.741Z,1520498760.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:01.135Z,1520498761.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:01.543Z,1520498761.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:01.936Z,1520498761.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:02.334Z,1520498762.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:02.745Z,1520498762.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:03.166Z,1520498763.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:03.570Z,1520498763.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:03.936Z,1520498763.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:04.334Z,1520498764.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:04.740Z,1520498764.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:05.136Z,1520498765.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:05.534Z,1520498765.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:05.937Z,1520498765.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:06.368Z,1520498766.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:06.770Z,1520498766.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:07.136Z,1520498767.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:07.538Z,1520498767.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:07.942Z,1520498767.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:08.338Z,1520498768.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:08.744Z,1520498768.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:09.149Z,1520498769.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:09.547Z,1520498769.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:09.967Z,1520498769.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:10.339Z,1520498770.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:10.738Z,1520498770.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:11.144Z,1520498771.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:11.542Z,1520498771.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:11.943Z,1520498771.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:12.350Z,1520498772.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:12.748Z,1520498772.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:13.167Z,1520498773.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:13.537Z,1520498773.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:13.948Z,1520498773.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:14.341Z,1520498774.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:14.751Z,1520498774.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:15.145Z,1520498775.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:15.548Z,1520498775.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:15.940Z,1520498775.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:16.338Z,1520498776.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:16.733Z,1520498776.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:17.138Z,1520498777.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:17.542Z,1520498777.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:17.943Z,1520498777.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:18.343Z,1520498778.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:18.749Z,1520498778.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:19.143Z,1520498779.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:19.540Z,1520498779.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:19.938Z,1520498779.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:20.341Z,1520498780.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:20.749Z,1520498780.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:21.173Z,1520498781.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:21.544Z,1520498781.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:21.945Z,1520498781.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:22.343Z,1520498782.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:22.739Z,1520498782.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:23.141Z,1520498783.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:23.537Z,1520498783.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:23.948Z,1520498783.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:24.372Z,1520498784.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:24.769Z,1520498784.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:25.140Z,1520498785.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:25.544Z,1520498785.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:25.943Z,1520498785.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:26.337Z,1520498786.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:26.753Z,1520498786.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:27.149Z,1520498787.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:27.573Z,1520498787.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:27.934Z,1520498787.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:28.338Z,1520498788.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:28.743Z,1520498788.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:29.138Z,1520498789.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:29.541Z,1520498789.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:29.948Z,1520498789.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:30.354Z,1520498790.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:30.774Z,1520498790.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:31.138Z,1520498791.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:31.535Z,1520498791.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:31.943Z,1520498791.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:32.338Z,1520498792.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:32.754Z,1520498792.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:33.149Z,1520498793.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:33.547Z,1520498793.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:33.951Z,1520498793.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:34.346Z,1520498794.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:34.738Z,1520498794.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:35.144Z,1520498795.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:35.538Z,1520498795.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:35.943Z,1520498795.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:36.358Z,1520498796.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:36.751Z,1520498796.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:37.154Z,1520498797.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:37.542Z,1520498797.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:37.935Z,1520498797.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:38.346Z,1520498798.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:38.748Z,1520498798.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:39.149Z,1520498799.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:42.258Z,1520498802.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:42.377Z,1520498802.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:42.756Z,1520498802.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:43.155Z,1520498803.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:43.575Z,1520498803.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:43.978Z,1520498803.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:44.385Z,1520498804.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:44.755Z,1520498804.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:45.179Z,1520498805.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:45.553Z,1520498805.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:45.955Z,1520498805.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:46.358Z,1520498806.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:46.787Z,1520498806.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:47.183Z,1520498807.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:47.557Z,1520498807.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:47.954Z,1520498807.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:48.379Z,1520498808.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:48.755Z,1520498808.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:49.155Z,1520498809.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:49.553Z,1520498809.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:49.958Z,1520498809.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:50.365Z,1520498810.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:50.760Z,1520498810.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:51.155Z,1520498811.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:51.555Z,1520498811.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:51.962Z,1520498811.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:52.357Z,1520498812.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:52.759Z,1520498812.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:53.186Z,1520498813.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:53.560Z,1520498813.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:53.958Z,1520498813.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:54.410Z,1520498814.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:54.786Z,1520498814.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:55.160Z,1520498815.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:55.555Z,1520498815.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:55.962Z,1520498815.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:56.388Z,1520498816.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:56.761Z,1520498816.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:57.158Z,1520498817.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:57.558Z,1520498817.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:57.982Z,1520498817.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:58.359Z,1520498818.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:58.763Z,1520498818.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:59.164Z,1520498819.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:59.583Z,1520498819.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:46:59.960Z,1520498819.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:00.357Z,1520498820.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:00.762Z,1520498820.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:01.169Z,1520498821.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:01.555Z,1520498821.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:01.963Z,1520498821.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:02.364Z,1520498822.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:02.780Z,1520498822.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:03.159Z,1520498823.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:03.559Z,1520498823.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:03.959Z,1520498823.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:04.372Z,1520498824.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:04.765Z,1520498824.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:05.163Z,1520498825.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:05.567Z,1520498825.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:05.969Z,1520498825.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:06.363Z,1520498826.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:06.758Z,1520498826.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:07.160Z,1520498827.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:07.568Z,1520498827.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:07.963Z,1520498827.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:08.363Z,1520498828.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:08.760Z,1520498828.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:09.172Z,1520498829.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:09.554Z,1520498829.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:09.952Z,1520498829.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:10.356Z,1520498830.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:10.790Z,1520498830.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:11.169Z,1520498831.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:11.571Z,1520498831.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:11.957Z,1520498831.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:12.372Z,1520498832.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:12.755Z,1520498832.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:13.155Z,1520498833.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:13.556Z,1520498833.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:13.982Z,1520498833.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:14.368Z,1520498834.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:14.760Z,1520498834.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:15.158Z,1520498835.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:15.554Z,1520498835.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:15.961Z,1520498835.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:16.354Z,1520498836.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:16.770Z,1520498836.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:17.187Z,1520498837.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:17.564Z,1520498837.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:17.960Z,1520498837.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:18.355Z,1520498838.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:18.772Z,1520498838.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:19.157Z,1520498839.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:19.561Z,1520498839.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:19.968Z,1520498839.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:20.386Z,1520498840.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:20.763Z,1520498840.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:21.159Z,1520498841.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:21.571Z,1520498841.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:21.972Z,1520498841.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:22.359Z,1520498842.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:22.770Z,1520498842.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:23.168Z,1520498843.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:23.590Z,1520498843.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:23.960Z,1520498843.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:24.358Z,1520498844.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:24.758Z,1520498844.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:25.182Z,1520498845.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:25.553Z,1520498845.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:25.966Z,1520498845.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:26.378Z,1520498846.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:26.772Z,1520498846.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:27.166Z,1520498847.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:27.590Z,1520498847.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:27.951Z,1520498847.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:28.382Z,1520498848.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:28.783Z,1520498848.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:29.174Z,1520498849.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:29.596Z,1520498849.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:29.978Z,1520498849.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:30.355Z,1520498850.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:30.755Z,1520498850.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:31.155Z,1520498851.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:31.576Z,1520498851.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:31.957Z,1520498851.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:32.381Z,1520498852.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:32.758Z,1520498852.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:33.210Z,1520498853.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:33.552Z,1520498853.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:33.987Z,1520498853.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:34.374Z,1520498854.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:34.787Z,1520498854.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:35.191Z,1520498855.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:35.563Z,1520498855.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:35.957Z,1520498855.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:36.372Z,1520498856.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:36.763Z,1520498856.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:37.159Z,1520498857.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:37.563Z,1520498857.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:37.914Z,1520498857.914 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T08:47:37.914Z,1520498857.914 [NAL9602] Data Fault, FailCount= 2
2018-03-08T08:47:37.914Z,1520498857.914 [NAL9602](ERROR): Data Fault
2018-03-08T08:47:37.990Z,1520498857.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:37.993Z,1520498857.993 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T08:42:37.9Z
2018-03-08T08:47:37.993Z,1520498857.993 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T08:47:37.993Z,1520498857.993 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T08:47:38.003Z,1520498858.003 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T08:47:38.310Z,1520498858.310 [NAL9602](INFO): Powering down
2018-03-08T08:47:38.363Z,1520498858.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:38.845Z,1520498858.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:39.160Z,1520498859.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:39.173Z,1520498859.173 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T08:47:39.173Z,1520498859.173 [NAL9602] No Fault, FailCount= 2
2018-03-08T08:47:42.254Z,1520498862.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:42.369Z,1520498862.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:42.682Z,1520498862.682 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0024.lzma
2018-03-08T08:47:42.751Z,1520498862.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:43.118Z,1520498863.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:43.483Z,1520498863.483 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0024.lzma.bak
2018-03-08T08:47:43.483Z,1520498863.483 [DataOverHttps](INFO): SBD MOMSN=7984242
2018-03-08T08:47:43.519Z,1520498863.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:44.091Z,1520498864.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:44.346Z,1520498864.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:47.422Z,1520498867.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:47.546Z,1520498867.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:47.922Z,1520498867.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:48.310Z,1520498868.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:48.710Z,1520498868.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:49.114Z,1520498869.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:49.509Z,1520498869.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:52.612Z,1520498872.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:52.753Z,1520498872.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:53.045Z,1520498873.045 [DataOverHttps](INFO): Sending 137 bytes from file Logs/20180308T074127/Express0025.lzma
2018-03-08T08:47:53.111Z,1520498873.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:53.477Z,1520498873.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:53.837Z,1520498873.837 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0025.lzma.bak
2018-03-08T08:47:53.837Z,1520498873.837 [DataOverHttps](INFO): SBD MOMSN=7984244
2018-03-08T08:47:53.905Z,1520498873.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:54.458Z,1520498874.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:54.461Z,1520498874.461 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T08:47:54.461Z,1520498874.461 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T08:47:54.461Z,1520498874.461 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T08:47:54.696Z,1520498874.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:55.080Z,1520498875.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:58.177Z,1520498878.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:58.306Z,1520498878.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:58.682Z,1520498878.682 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:58.682Z,1520498878.682 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22
2018-03-08T08:47:58.682Z,1520498878.682 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T08:47:58.684Z,1520498878.684 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:58.684Z,1520498878.684 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22
2018-03-08T08:47:58.704Z,1520498878.704 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T08:47:58.706Z,1520498878.706 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:47:58.706Z,1520498878.706 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 22
2018-03-08T08:47:58.706Z,1520498878.706 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T08:47:58.734Z,1520498878.734 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T08:47:58.734Z,1520498878.734 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T08:47:58.734Z,1520498878.734 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T08:47:59.117Z,1520498879.117 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T08:47:59.117Z,1520498879.117 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22
2018-03-08T08:47:59.117Z,1520498879.117 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T08:47:59.118Z,1520498879.118 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22
2018-03-08T08:47:59.118Z,1520498879.118 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T08:47:59.118Z,1520498879.118 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 22
2018-03-08T08:47:59.477Z,1520498879.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T08:47:59.478Z,1520498879.478 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:47:59.478Z,1520498879.478 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:47:59.479Z,1520498879.479 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T08:47:59.479Z,1520498879.479 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:47:59.479Z,1520498879.479 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:47:59.480Z,1520498879.480 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T08:47:59.480Z,1520498879.480 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:47:59.480Z,1520498879.480 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:47:59.877Z,1520498879.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T08:47:59.878Z,1520498879.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:00.277Z,1520498880.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T08:48:00.278Z,1520498880.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:00.677Z,1520498880.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T08:48:00.678Z,1520498880.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:01.082Z,1520498881.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T08:48:01.083Z,1520498881.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:01.481Z,1520498881.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T08:48:01.482Z,1520498881.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:01.882Z,1520498881.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T08:48:01.882Z,1520498881.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:02.276Z,1520498882.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T08:48:02.277Z,1520498882.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:02.681Z,1520498882.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T08:48:02.682Z,1520498882.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:03.081Z,1520498883.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T08:48:03.082Z,1520498883.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:03.476Z,1520498883.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T08:48:03.477Z,1520498883.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:03.886Z,1520498883.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T08:48:03.887Z,1520498883.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:04.281Z,1520498884.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T08:48:04.282Z,1520498884.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:04.681Z,1520498884.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T08:48:04.682Z,1520498884.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:05.086Z,1520498885.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T08:48:05.087Z,1520498885.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:05.481Z,1520498885.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T08:48:05.482Z,1520498885.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:05.882Z,1520498885.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T08:48:05.883Z,1520498885.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:06.286Z,1520498886.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T08:48:06.287Z,1520498886.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:06.678Z,1520498886.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T08:48:06.678Z,1520498886.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:07.080Z,1520498887.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T08:48:07.081Z,1520498887.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:07.476Z,1520498887.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T08:48:07.477Z,1520498887.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:07.873Z,1520498887.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T08:48:07.874Z,1520498887.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:08.299Z,1520498888.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T08:48:08.300Z,1520498888.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:08.640Z,1520498888.640 [NAL9602](INFO): Powering up NAL9602
2018-03-08T08:48:08.684Z,1520498888.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T08:48:08.685Z,1520498888.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:09.066Z,1520498889.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T08:48:09.067Z,1520498889.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:09.470Z,1520498889.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T08:48:09.471Z,1520498889.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:09.870Z,1520498889.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T08:48:09.871Z,1520498889.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:10.293Z,1520498890.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T08:48:10.294Z,1520498890.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:10.681Z,1520498890.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T08:48:10.682Z,1520498890.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:11.075Z,1520498891.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T08:48:11.077Z,1520498891.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:11.475Z,1520498891.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T08:48:11.477Z,1520498891.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:11.879Z,1520498891.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T08:48:11.880Z,1520498891.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:12.280Z,1520498892.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T08:48:12.281Z,1520498892.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:12.674Z,1520498892.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T08:48:12.675Z,1520498892.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:13.078Z,1520498893.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T08:48:13.079Z,1520498893.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:13.471Z,1520498893.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T08:48:13.472Z,1520498893.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:13.882Z,1520498893.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T08:48:13.883Z,1520498893.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:14.279Z,1520498894.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T08:48:14.279Z,1520498894.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:14.671Z,1520498894.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T08:48:14.672Z,1520498894.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:15.079Z,1520498895.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T08:48:15.080Z,1520498895.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:15.478Z,1520498895.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T08:48:15.479Z,1520498895.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:15.888Z,1520498895.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T08:48:15.889Z,1520498895.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:16.282Z,1520498896.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T08:48:16.283Z,1520498896.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:16.682Z,1520498896.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T08:48:16.683Z,1520498896.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:17.076Z,1520498897.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T08:48:17.077Z,1520498897.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:17.481Z,1520498897.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T08:48:17.481Z,1520498897.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:17.885Z,1520498897.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T08:48:17.886Z,1520498897.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:18.280Z,1520498898.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T08:48:18.282Z,1520498898.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:18.681Z,1520498898.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T08:48:18.682Z,1520498898.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:19.098Z,1520498899.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:19.442Z,1520498899.442 [NAL9602](INFO): NAL9602 initialized
2018-03-08T08:48:19.490Z,1520498899.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:19.881Z,1520498899.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:20.303Z,1520498900.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:20.684Z,1520498900.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:21.089Z,1520498901.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:21.486Z,1520498901.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:21.883Z,1520498901.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:22.285Z,1520498902.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:22.692Z,1520498902.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:23.089Z,1520498903.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:23.489Z,1520498903.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:23.880Z,1520498903.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:24.282Z,1520498904.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:24.682Z,1520498904.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:25.083Z,1520498905.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:25.488Z,1520498905.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:25.893Z,1520498905.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:26.292Z,1520498906.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:26.685Z,1520498906.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:27.079Z,1520498907.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:27.492Z,1520498907.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:27.896Z,1520498907.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:28.287Z,1520498908.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:28.698Z,1520498908.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:29.086Z,1520498909.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:29.489Z,1520498909.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:29.899Z,1520498909.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:30.299Z,1520498910.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:30.686Z,1520498910.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:31.086Z,1520498911.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:31.485Z,1520498911.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:31.894Z,1520498911.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:32.300Z,1520498912.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:32.686Z,1520498912.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:33.079Z,1520498913.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:33.500Z,1520498913.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:33.890Z,1520498913.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:34.289Z,1520498914.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:34.686Z,1520498914.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:35.090Z,1520498915.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:35.490Z,1520498915.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:35.893Z,1520498915.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:36.284Z,1520498916.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:36.680Z,1520498916.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:37.080Z,1520498917.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:37.490Z,1520498917.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:37.892Z,1520498917.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:38.293Z,1520498918.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:38.685Z,1520498918.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:39.090Z,1520498919.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:39.493Z,1520498919.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:39.890Z,1520498919.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:40.291Z,1520498920.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:40.689Z,1520498920.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:41.082Z,1520498921.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:41.490Z,1520498921.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:41.898Z,1520498921.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:42.294Z,1520498922.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:42.680Z,1520498922.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:43.087Z,1520498923.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:43.484Z,1520498923.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:43.892Z,1520498923.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:44.293Z,1520498924.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:44.682Z,1520498924.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:45.080Z,1520498925.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:45.501Z,1520498925.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:45.896Z,1520498925.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:46.296Z,1520498926.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:46.685Z,1520498926.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:47.091Z,1520498927.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:47.493Z,1520498927.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:47.897Z,1520498927.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:48.303Z,1520498928.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:48.689Z,1520498928.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:49.083Z,1520498929.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:49.497Z,1520498929.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:49.902Z,1520498929.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:50.300Z,1520498930.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:50.671Z,1520498930.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:51.078Z,1520498931.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:51.510Z,1520498931.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:51.906Z,1520498931.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:52.302Z,1520498932.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:52.676Z,1520498932.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:53.075Z,1520498933.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:53.507Z,1520498933.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:53.888Z,1520498933.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:54.292Z,1520498934.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:54.682Z,1520498934.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:55.080Z,1520498935.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:58.193Z,1520498938.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:58.342Z,1520498938.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:58.692Z,1520498938.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:59.086Z,1520498939.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:59.488Z,1520498939.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:48:59.887Z,1520498939.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:00.291Z,1520498940.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:00.691Z,1520498940.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:01.092Z,1520498941.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:01.499Z,1520498941.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:01.881Z,1520498941.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:02.285Z,1520498942.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:02.682Z,1520498942.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:03.078Z,1520498943.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:03.499Z,1520498943.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:03.892Z,1520498943.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:04.291Z,1520498944.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:04.688Z,1520498944.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:05.086Z,1520498945.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:05.489Z,1520498945.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:05.892Z,1520498945.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:06.293Z,1520498946.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:06.679Z,1520498946.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:07.085Z,1520498947.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:07.491Z,1520498947.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:07.892Z,1520498947.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:08.293Z,1520498948.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:08.686Z,1520498948.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:09.083Z,1520498949.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:09.499Z,1520498949.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:09.895Z,1520498949.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:10.291Z,1520498950.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:10.684Z,1520498950.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:11.084Z,1520498951.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:11.488Z,1520498951.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:11.892Z,1520498951.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:12.288Z,1520498952.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:12.686Z,1520498952.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:13.085Z,1520498953.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:13.491Z,1520498953.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:13.891Z,1520498953.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:14.292Z,1520498954.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:14.694Z,1520498954.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:15.084Z,1520498955.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:15.492Z,1520498955.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:15.892Z,1520498955.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:16.291Z,1520498956.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:16.688Z,1520498956.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:17.086Z,1520498957.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:17.488Z,1520498957.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:17.892Z,1520498957.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:18.299Z,1520498958.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:18.686Z,1520498958.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:19.083Z,1520498959.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:19.497Z,1520498959.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:19.899Z,1520498959.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:20.297Z,1520498960.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:20.688Z,1520498960.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:21.086Z,1520498961.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:21.501Z,1520498961.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:21.903Z,1520498961.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:22.292Z,1520498962.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:22.686Z,1520498962.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:23.086Z,1520498963.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:23.496Z,1520498963.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:23.897Z,1520498963.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:24.289Z,1520498964.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:24.684Z,1520498964.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:25.090Z,1520498965.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:25.492Z,1520498965.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:25.897Z,1520498965.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:26.303Z,1520498966.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:26.689Z,1520498966.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:27.086Z,1520498967.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:27.503Z,1520498967.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:27.901Z,1520498967.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:28.298Z,1520498968.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:28.694Z,1520498968.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:29.090Z,1520498969.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:29.496Z,1520498969.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:29.901Z,1520498969.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:30.303Z,1520498970.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:30.690Z,1520498970.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:31.091Z,1520498971.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:31.499Z,1520498971.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:31.901Z,1520498971.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:32.299Z,1520498972.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:32.689Z,1520498972.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:33.082Z,1520498973.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:33.497Z,1520498973.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:33.903Z,1520498973.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:34.293Z,1520498974.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:34.693Z,1520498974.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:35.094Z,1520498975.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:35.495Z,1520498975.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:35.902Z,1520498975.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:36.297Z,1520498976.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:36.686Z,1520498976.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:37.102Z,1520498977.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:37.503Z,1520498977.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:37.900Z,1520498977.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:38.303Z,1520498978.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:38.699Z,1520498978.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:39.077Z,1520498979.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:39.509Z,1520498979.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:39.905Z,1520498979.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:40.288Z,1520498980.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:40.683Z,1520498980.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:41.083Z,1520498981.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:41.510Z,1520498981.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:41.907Z,1520498981.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:42.311Z,1520498982.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:42.680Z,1520498982.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:43.081Z,1520498983.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:43.511Z,1520498983.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:43.912Z,1520498983.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:44.294Z,1520498984.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:44.694Z,1520498984.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:45.085Z,1520498985.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:45.492Z,1520498985.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:45.893Z,1520498985.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:46.289Z,1520498986.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:46.684Z,1520498986.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:47.087Z,1520498987.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:47.489Z,1520498987.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:47.891Z,1520498987.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:48.289Z,1520498988.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:48.685Z,1520498988.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:49.086Z,1520498989.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:49.489Z,1520498989.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:49.892Z,1520498989.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:50.314Z,1520498990.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:50.684Z,1520498990.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:51.081Z,1520498991.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:51.489Z,1520498991.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:51.892Z,1520498991.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:52.288Z,1520498992.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:52.683Z,1520498992.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:53.085Z,1520498993.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:53.488Z,1520498993.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:53.886Z,1520498993.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:54.289Z,1520498994.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:54.685Z,1520498994.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:55.086Z,1520498995.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:58.226Z,1520498998.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:58.370Z,1520498998.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:58.734Z,1520498998.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:59.098Z,1520498999.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:59.503Z,1520498999.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:49:59.902Z,1520498999.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:00.295Z,1520499000.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:00.708Z,1520499000.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:01.112Z,1520499001.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:01.508Z,1520499001.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:01.901Z,1520499001.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:02.301Z,1520499002.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:02.701Z,1520499002.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:03.094Z,1520499003.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:03.503Z,1520499003.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:03.909Z,1520499003.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:04.304Z,1520499004.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:04.699Z,1520499004.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:05.103Z,1520499005.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:05.502Z,1520499005.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:05.905Z,1520499005.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:06.300Z,1520499006.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:06.704Z,1520499006.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:07.108Z,1520499007.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:07.505Z,1520499007.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:07.895Z,1520499007.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:08.297Z,1520499008.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:08.703Z,1520499008.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:09.094Z,1520499009.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:09.503Z,1520499009.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:09.904Z,1520499009.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:10.303Z,1520499010.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:10.707Z,1520499010.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:11.101Z,1520499011.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:11.495Z,1520499011.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:11.899Z,1520499011.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:12.298Z,1520499012.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:12.704Z,1520499012.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:13.108Z,1520499013.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:13.510Z,1520499013.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:13.901Z,1520499013.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:14.298Z,1520499014.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:14.699Z,1520499014.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:15.101Z,1520499015.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:15.505Z,1520499015.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:15.903Z,1520499015.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:16.304Z,1520499016.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:16.702Z,1520499016.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:17.094Z,1520499017.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:17.502Z,1520499017.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:17.899Z,1520499017.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:18.301Z,1520499018.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:18.705Z,1520499018.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:19.104Z,1520499019.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:19.510Z,1520499019.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:19.901Z,1520499019.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:20.306Z,1520499020.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:20.695Z,1520499020.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:21.106Z,1520499021.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:21.505Z,1520499021.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:21.903Z,1520499021.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:22.305Z,1520499022.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:22.698Z,1520499022.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:23.102Z,1520499023.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:23.499Z,1520499023.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:23.900Z,1520499023.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:24.301Z,1520499024.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:24.705Z,1520499024.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:25.110Z,1520499025.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:25.514Z,1520499025.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:25.910Z,1520499025.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:26.306Z,1520499026.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:26.703Z,1520499026.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:27.107Z,1520499027.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:27.511Z,1520499027.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:27.907Z,1520499027.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:28.307Z,1520499028.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:28.701Z,1520499028.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:29.098Z,1520499029.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:29.500Z,1520499029.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:29.903Z,1520499029.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:30.301Z,1520499030.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:30.708Z,1520499030.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:31.107Z,1520499031.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:31.507Z,1520499031.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:31.898Z,1520499031.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:32.301Z,1520499032.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:32.706Z,1520499032.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:33.102Z,1520499033.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:33.507Z,1520499033.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:33.907Z,1520499033.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:34.307Z,1520499034.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:34.706Z,1520499034.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:35.102Z,1520499035.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:35.502Z,1520499035.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:35.902Z,1520499035.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:36.298Z,1520499036.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:36.708Z,1520499036.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:37.107Z,1520499037.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:37.508Z,1520499037.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:37.902Z,1520499037.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:38.302Z,1520499038.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:38.695Z,1520499038.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:39.098Z,1520499039.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:39.507Z,1520499039.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:39.908Z,1520499039.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:40.312Z,1520499040.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:40.706Z,1520499040.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:41.102Z,1520499041.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:41.506Z,1520499041.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:41.902Z,1520499041.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:42.304Z,1520499042.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:42.712Z,1520499042.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:43.119Z,1520499043.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:43.513Z,1520499043.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:43.896Z,1520499043.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:44.314Z,1520499044.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:44.705Z,1520499044.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:45.100Z,1520499045.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:45.512Z,1520499045.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:45.913Z,1520499045.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:46.308Z,1520499046.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:46.704Z,1520499046.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:47.099Z,1520499047.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:47.513Z,1520499047.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:47.923Z,1520499047.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:48.314Z,1520499048.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:48.706Z,1520499048.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:49.100Z,1520499049.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:49.506Z,1520499049.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:49.904Z,1520499049.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:50.299Z,1520499050.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:50.712Z,1520499050.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:51.107Z,1520499051.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:51.508Z,1520499051.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:51.906Z,1520499051.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:52.310Z,1520499052.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:52.700Z,1520499052.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:53.101Z,1520499053.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:53.509Z,1520499053.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:53.912Z,1520499053.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:54.319Z,1520499054.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:54.699Z,1520499054.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:55.105Z,1520499055.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:58.203Z,1520499058.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:58.345Z,1520499058.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:58.695Z,1520499058.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:59.095Z,1520499059.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:59.496Z,1520499059.496 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:59.501Z,1520499059.501 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23
2018-03-08T08:50:59.501Z,1520499059.501 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T08:50:59.502Z,1520499059.502 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:59.502Z,1520499059.502 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23
2018-03-08T08:50:59.503Z,1520499059.503 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T08:50:59.504Z,1520499059.504 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:50:59.509Z,1520499059.509 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 23
2018-03-08T08:50:59.509Z,1520499059.509 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T08:50:59.534Z,1520499059.534 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T08:50:59.534Z,1520499059.534 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T08:50:59.534Z,1520499059.534 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T08:50:59.886Z,1520499059.886 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T08:50:59.886Z,1520499059.886 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23
2018-03-08T08:50:59.887Z,1520499059.887 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T08:50:59.887Z,1520499059.887 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23
2018-03-08T08:50:59.887Z,1520499059.887 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T08:50:59.887Z,1520499059.887 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 23
2018-03-08T08:51:00.274Z,1520499060.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T08:51:00.274Z,1520499060.274 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:51:00.274Z,1520499060.274 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:51:00.275Z,1520499060.275 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T08:51:00.275Z,1520499060.275 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:51:00.276Z,1520499060.276 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:51:00.276Z,1520499060.276 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T08:51:00.276Z,1520499060.276 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:51:00.277Z,1520499060.277 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:51:00.682Z,1520499060.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T08:51:00.683Z,1520499060.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:01.082Z,1520499061.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T08:51:01.083Z,1520499061.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:01.484Z,1520499061.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T08:51:01.485Z,1520499061.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:01.884Z,1520499061.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T08:51:01.885Z,1520499061.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:02.283Z,1520499062.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T08:51:02.284Z,1520499062.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:02.674Z,1520499062.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T08:51:02.675Z,1520499062.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:03.072Z,1520499063.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T08:51:03.073Z,1520499063.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:03.484Z,1520499063.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T08:51:03.485Z,1520499063.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:03.883Z,1520499063.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T08:51:03.884Z,1520499063.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:04.283Z,1520499064.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T08:51:04.284Z,1520499064.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:04.681Z,1520499064.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T08:51:04.682Z,1520499064.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:05.078Z,1520499065.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T08:51:05.079Z,1520499065.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:05.480Z,1520499065.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T08:51:05.481Z,1520499065.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:05.887Z,1520499065.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T08:51:05.888Z,1520499065.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:06.283Z,1520499066.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T08:51:06.284Z,1520499066.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:06.682Z,1520499066.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T08:51:06.683Z,1520499066.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:07.077Z,1520499067.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T08:51:07.078Z,1520499067.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:07.484Z,1520499067.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T08:51:07.485Z,1520499067.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:07.884Z,1520499067.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T08:51:07.885Z,1520499067.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:08.290Z,1520499068.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T08:51:08.291Z,1520499068.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:08.674Z,1520499068.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T08:51:08.675Z,1520499068.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:09.072Z,1520499069.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T08:51:09.073Z,1520499069.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:09.483Z,1520499069.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T08:51:09.484Z,1520499069.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:09.883Z,1520499069.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T08:51:09.883Z,1520499069.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:10.283Z,1520499070.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T08:51:10.284Z,1520499070.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:10.678Z,1520499070.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T08:51:10.679Z,1520499070.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:11.078Z,1520499071.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T08:51:11.079Z,1520499071.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:11.483Z,1520499071.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T08:51:11.484Z,1520499071.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:11.884Z,1520499071.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T08:51:11.885Z,1520499071.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:12.284Z,1520499072.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T08:51:12.285Z,1520499072.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:12.676Z,1520499072.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T08:51:12.677Z,1520499072.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:13.075Z,1520499073.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T08:51:13.077Z,1520499073.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:13.483Z,1520499073.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T08:51:13.484Z,1520499073.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:13.883Z,1520499073.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T08:51:13.884Z,1520499073.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:14.283Z,1520499074.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T08:51:14.283Z,1520499074.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:14.675Z,1520499074.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T08:51:14.675Z,1520499074.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:15.073Z,1520499075.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T08:51:15.074Z,1520499075.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:15.490Z,1520499075.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T08:51:15.491Z,1520499075.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:15.887Z,1520499075.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T08:51:15.888Z,1520499075.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:16.294Z,1520499076.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T08:51:16.295Z,1520499076.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:16.678Z,1520499076.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T08:51:16.679Z,1520499076.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:17.079Z,1520499077.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T08:51:17.079Z,1520499077.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:17.483Z,1520499077.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T08:51:17.484Z,1520499077.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:17.894Z,1520499077.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T08:51:17.895Z,1520499077.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:18.288Z,1520499078.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T08:51:18.289Z,1520499078.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:18.686Z,1520499078.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T08:51:18.687Z,1520499078.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:19.082Z,1520499079.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T08:51:19.083Z,1520499079.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:19.488Z,1520499079.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T08:51:19.489Z,1520499079.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:19.886Z,1520499079.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:20.289Z,1520499080.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:20.681Z,1520499080.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:21.072Z,1520499081.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:21.493Z,1520499081.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:21.890Z,1520499081.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:22.289Z,1520499082.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:22.680Z,1520499082.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:23.089Z,1520499083.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:23.488Z,1520499083.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:23.891Z,1520499083.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:24.290Z,1520499084.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:24.691Z,1520499084.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:25.086Z,1520499085.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:25.490Z,1520499085.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:25.898Z,1520499085.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:26.289Z,1520499086.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:26.688Z,1520499086.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:27.063Z,1520499087.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:27.494Z,1520499087.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:27.890Z,1520499087.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:28.286Z,1520499088.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:28.666Z,1520499088.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:29.069Z,1520499089.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:29.485Z,1520499089.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:29.895Z,1520499089.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:30.294Z,1520499090.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:30.669Z,1520499090.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:31.095Z,1520499091.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:31.501Z,1520499091.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:31.880Z,1520499091.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:32.284Z,1520499092.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:32.675Z,1520499092.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:33.079Z,1520499093.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:33.481Z,1520499093.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:33.884Z,1520499093.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:34.280Z,1520499094.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:34.675Z,1520499094.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:35.075Z,1520499095.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:35.479Z,1520499095.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:35.884Z,1520499095.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:36.307Z,1520499096.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:36.678Z,1520499096.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:37.077Z,1520499097.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:37.480Z,1520499097.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:37.884Z,1520499097.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:38.280Z,1520499098.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:38.675Z,1520499098.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:39.083Z,1520499099.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:39.481Z,1520499099.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:39.886Z,1520499099.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:40.281Z,1520499100.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:40.677Z,1520499100.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:40.706Z,1520499100.706 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T08:51:41.079Z,1520499101.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:41.489Z,1520499101.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:41.887Z,1520499101.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:42.291Z,1520499102.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:42.679Z,1520499102.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:43.075Z,1520499103.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:43.494Z,1520499103.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:43.883Z,1520499103.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:44.291Z,1520499104.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:44.679Z,1520499104.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:45.073Z,1520499105.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:45.484Z,1520499105.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:45.889Z,1520499105.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:46.290Z,1520499106.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:46.679Z,1520499106.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:47.085Z,1520499107.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:47.484Z,1520499107.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:47.895Z,1520499107.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:48.292Z,1520499108.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:48.680Z,1520499108.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:49.081Z,1520499109.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:49.489Z,1520499109.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:49.888Z,1520499109.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:50.287Z,1520499110.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:50.680Z,1520499110.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:51.081Z,1520499111.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:51.488Z,1520499111.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:51.888Z,1520499111.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:52.285Z,1520499112.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:52.681Z,1520499112.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:53.087Z,1520499113.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:53.494Z,1520499113.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:53.891Z,1520499113.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:54.292Z,1520499114.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:54.698Z,1520499114.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:55.127Z,1520499115.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:55.493Z,1520499115.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:58.590Z,1520499118.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:58.730Z,1520499118.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:59.074Z,1520499119.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:59.474Z,1520499119.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:51:59.876Z,1520499119.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:00.275Z,1520499120.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:00.680Z,1520499120.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:01.083Z,1520499121.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:01.479Z,1520499121.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:01.878Z,1520499121.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:02.255Z,1520499122.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:02.658Z,1520499122.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:03.055Z,1520499123.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:03.480Z,1520499123.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:03.880Z,1520499123.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:04.284Z,1520499124.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:04.655Z,1520499124.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:05.086Z,1520499125.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:05.482Z,1520499125.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:05.864Z,1520499125.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:06.288Z,1520499126.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:06.659Z,1520499126.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:07.059Z,1520499127.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:07.468Z,1520499127.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:07.871Z,1520499127.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:08.290Z,1520499128.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:08.667Z,1520499128.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:09.062Z,1520499129.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:09.464Z,1520499129.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:09.891Z,1520499129.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:10.288Z,1520499130.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:10.660Z,1520499130.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:11.062Z,1520499131.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:11.491Z,1520499131.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:11.861Z,1520499131.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:12.289Z,1520499132.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:12.664Z,1520499132.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:13.063Z,1520499133.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:13.468Z,1520499133.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:13.871Z,1520499133.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:14.268Z,1520499134.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:14.668Z,1520499134.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:15.063Z,1520499135.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:15.472Z,1520499135.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:15.872Z,1520499135.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:16.268Z,1520499136.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:16.667Z,1520499136.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:17.070Z,1520499137.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:17.468Z,1520499137.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:17.867Z,1520499137.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:18.269Z,1520499138.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:18.667Z,1520499138.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:19.057Z,1520499139.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:19.468Z,1520499139.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:19.871Z,1520499139.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:20.269Z,1520499140.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:20.667Z,1520499140.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:21.066Z,1520499141.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:21.468Z,1520499141.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:21.868Z,1520499141.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:22.272Z,1520499142.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:22.671Z,1520499142.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:23.070Z,1520499143.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:23.473Z,1520499143.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:23.868Z,1520499143.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:24.268Z,1520499144.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:24.664Z,1520499144.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:25.060Z,1520499145.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:25.467Z,1520499145.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:25.900Z,1520499145.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:26.268Z,1520499146.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:26.668Z,1520499146.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:27.062Z,1520499147.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:27.468Z,1520499147.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:27.868Z,1520499147.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:28.269Z,1520499148.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:28.658Z,1520499148.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:29.055Z,1520499149.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:29.489Z,1520499149.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:29.872Z,1520499149.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:30.318Z,1520499150.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:30.660Z,1520499150.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:31.073Z,1520499151.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:31.476Z,1520499151.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:31.877Z,1520499151.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:32.268Z,1520499152.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:32.669Z,1520499152.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:33.067Z,1520499153.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:33.468Z,1520499153.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:33.876Z,1520499153.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:34.277Z,1520499154.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:34.669Z,1520499154.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:35.071Z,1520499155.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:35.478Z,1520499155.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:35.890Z,1520499155.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:36.283Z,1520499156.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:36.670Z,1520499156.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:37.067Z,1520499157.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:37.481Z,1520499157.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:37.887Z,1520499157.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:38.280Z,1520499158.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:38.670Z,1520499158.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:39.074Z,1520499159.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:39.483Z,1520499159.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:39.887Z,1520499159.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:40.372Z,1520499160.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:40.670Z,1520499160.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:41.071Z,1520499161.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:41.474Z,1520499161.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:41.878Z,1520499161.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:42.272Z,1520499162.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:42.674Z,1520499162.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:43.069Z,1520499163.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:43.475Z,1520499163.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:43.876Z,1520499163.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:44.277Z,1520499164.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:44.666Z,1520499164.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:45.073Z,1520499165.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:45.477Z,1520499165.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:45.879Z,1520499165.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:46.286Z,1520499166.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:46.674Z,1520499166.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:47.073Z,1520499167.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:47.478Z,1520499167.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:47.880Z,1520499167.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:48.279Z,1520499168.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:48.674Z,1520499168.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:49.073Z,1520499169.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:49.479Z,1520499169.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:49.877Z,1520499169.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:50.276Z,1520499170.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:50.673Z,1520499170.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:51.074Z,1520499171.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:51.478Z,1520499171.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:51.877Z,1520499171.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:52.278Z,1520499172.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:52.673Z,1520499172.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:53.078Z,1520499173.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:53.478Z,1520499173.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:53.887Z,1520499173.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:54.280Z,1520499174.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:54.682Z,1520499174.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:55.056Z,1520499175.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:55.075Z,1520499175.075 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T08:52:55.075Z,1520499175.075 [Default:CheckIn:C.Wait] Stopped
2018-03-08T08:52:55.075Z,1520499175.075 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T08:52:55.075Z,1520499175.075 [Default:CheckIn:D] Running Loop=1
2018-03-08T08:52:55.479Z,1520499175.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:55.482Z,1520499175.482 [Default:CheckIn:D] Stopped
2018-03-08T08:52:55.483Z,1520499175.483 [Default:CheckIn:E] Running Loop=1
2018-03-08T08:52:55.879Z,1520499175.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:55.883Z,1520499175.883 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 67.177954 min 
2018-03-08T08:52:55.883Z,1520499175.883 [Default:CheckIn:E] Stopped
2018-03-08T08:52:55.883Z,1520499175.883 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T08:52:55.883Z,1520499175.883 [Default:CheckIn] Stopped
2018-03-08T08:52:55.883Z,1520499175.883 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T08:52:55.883Z,1520499175.883 [Default:CheckIn](INFO): Running loop #7
2018-03-08T08:52:55.883Z,1520499175.883 [Default:CheckIn] Running Loop=7
2018-03-08T08:52:55.884Z,1520499175.884 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T08:52:55.884Z,1520499175.884 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T08:52:58.987Z,1520499178.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:59.126Z,1520499179.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:59.482Z,1520499179.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:52:59.853Z,1520499179.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:00.262Z,1520499180.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:00.667Z,1520499180.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:01.090Z,1520499181.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:01.472Z,1520499181.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:01.862Z,1520499181.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:02.261Z,1520499182.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:02.658Z,1520499182.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:03.058Z,1520499183.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:03.465Z,1520499183.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:03.868Z,1520499183.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:04.274Z,1520499184.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:04.661Z,1520499184.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:05.061Z,1520499185.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:05.470Z,1520499185.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:05.869Z,1520499185.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:06.263Z,1520499186.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:06.662Z,1520499186.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:07.061Z,1520499187.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:07.464Z,1520499187.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:07.863Z,1520499187.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:08.265Z,1520499188.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:08.662Z,1520499188.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:09.058Z,1520499189.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:09.465Z,1520499189.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:09.868Z,1520499189.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:10.270Z,1520499190.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:10.670Z,1520499190.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:11.055Z,1520499191.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:11.476Z,1520499191.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:11.868Z,1520499191.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:12.264Z,1520499192.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:12.660Z,1520499192.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:13.055Z,1520499193.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:13.465Z,1520499193.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:13.867Z,1520499193.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:14.265Z,1520499194.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:14.659Z,1520499194.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:15.061Z,1520499195.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:15.466Z,1520499195.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:15.868Z,1520499195.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:16.270Z,1520499196.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:16.657Z,1520499196.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:17.058Z,1520499197.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:17.465Z,1520499197.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:17.863Z,1520499197.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:18.264Z,1520499198.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:18.659Z,1520499198.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:19.055Z,1520499199.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:19.463Z,1520499199.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:19.867Z,1520499199.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:20.265Z,1520499200.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:20.658Z,1520499200.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:21.061Z,1520499201.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:21.465Z,1520499201.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:21.864Z,1520499201.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:22.270Z,1520499202.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:22.666Z,1520499202.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:23.058Z,1520499203.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:23.470Z,1520499203.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:23.864Z,1520499203.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:24.263Z,1520499204.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:24.662Z,1520499204.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:25.058Z,1520499205.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:25.468Z,1520499205.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:25.871Z,1520499205.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:26.271Z,1520499206.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:26.659Z,1520499206.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:27.058Z,1520499207.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:27.471Z,1520499207.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:27.871Z,1520499207.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:28.278Z,1520499208.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:28.663Z,1520499208.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:29.062Z,1520499209.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:29.471Z,1520499209.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:29.867Z,1520499209.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:30.271Z,1520499210.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:30.663Z,1520499210.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:31.066Z,1520499211.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:31.471Z,1520499211.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:31.871Z,1520499211.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:32.269Z,1520499212.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:32.663Z,1520499212.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:33.066Z,1520499213.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:33.469Z,1520499213.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:33.871Z,1520499213.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:34.271Z,1520499214.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:34.665Z,1520499214.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:35.062Z,1520499215.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:35.478Z,1520499215.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:35.865Z,1520499215.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:36.272Z,1520499216.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:36.663Z,1520499216.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:37.056Z,1520499217.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:37.473Z,1520499217.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:37.882Z,1520499217.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:38.269Z,1520499218.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:38.660Z,1520499218.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:39.062Z,1520499219.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:39.473Z,1520499219.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:39.872Z,1520499219.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:40.282Z,1520499220.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:40.657Z,1520499220.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:41.069Z,1520499221.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:41.476Z,1520499221.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:41.867Z,1520499221.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:42.279Z,1520499222.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:42.670Z,1520499222.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:43.047Z,1520499223.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:43.478Z,1520499223.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:43.878Z,1520499223.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:44.278Z,1520499224.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:44.670Z,1520499224.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:45.074Z,1520499225.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:45.481Z,1520499225.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:45.879Z,1520499225.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:46.286Z,1520499226.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:46.659Z,1520499226.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:47.062Z,1520499227.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:47.481Z,1520499227.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:47.887Z,1520499227.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:48.287Z,1520499228.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:48.658Z,1520499228.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:49.064Z,1520499229.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:49.461Z,1520499229.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:49.864Z,1520499229.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:50.287Z,1520499230.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:50.659Z,1520499230.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:51.059Z,1520499231.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:51.487Z,1520499231.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:51.884Z,1520499231.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:52.264Z,1520499232.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:52.660Z,1520499232.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:53.054Z,1520499233.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:53.465Z,1520499233.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:53.888Z,1520499233.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:54.270Z,1520499234.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:54.664Z,1520499234.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:55.062Z,1520499235.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:55.464Z,1520499235.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:55.865Z,1520499235.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:56.265Z,1520499236.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:59.360Z,1520499239.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:59.495Z,1520499239.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:53:59.870Z,1520499239.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:00.263Z,1520499240.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:00.664Z,1520499240.664 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:00.665Z,1520499240.665 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24
2018-03-08T08:54:00.665Z,1520499240.665 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T08:54:00.666Z,1520499240.666 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:00.666Z,1520499240.666 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24
2018-03-08T08:54:00.667Z,1520499240.667 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T08:54:00.668Z,1520499240.668 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:00.668Z,1520499240.668 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 24
2018-03-08T08:54:00.669Z,1520499240.669 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T08:54:00.709Z,1520499240.709 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T08:54:00.709Z,1520499240.709 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T08:54:00.709Z,1520499240.709 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T08:54:01.071Z,1520499241.071 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T08:54:01.071Z,1520499241.071 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24
2018-03-08T08:54:01.071Z,1520499241.071 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T08:54:01.071Z,1520499241.071 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24
2018-03-08T08:54:01.072Z,1520499241.072 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T08:54:01.072Z,1520499241.072 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 24
2018-03-08T08:54:01.455Z,1520499241.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T08:54:01.455Z,1520499241.455 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:54:01.456Z,1520499241.456 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:54:01.456Z,1520499241.456 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T08:54:01.461Z,1520499241.461 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:54:01.461Z,1520499241.461 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:54:01.461Z,1520499241.461 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T08:54:01.462Z,1520499241.462 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:54:01.462Z,1520499241.462 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:54:01.855Z,1520499241.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T08:54:01.856Z,1520499241.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:02.258Z,1520499242.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T08:54:02.258Z,1520499242.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:02.661Z,1520499242.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T08:54:02.662Z,1520499242.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:03.065Z,1520499243.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T08:54:03.066Z,1520499243.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:03.460Z,1520499243.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T08:54:03.461Z,1520499243.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:03.851Z,1520499243.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T08:54:03.852Z,1520499243.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:04.261Z,1520499244.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T08:54:04.262Z,1520499244.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:04.663Z,1520499244.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T08:54:04.664Z,1520499244.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:05.035Z,1520499245.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T08:54:05.036Z,1520499245.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:05.467Z,1520499245.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T08:54:05.468Z,1520499245.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:05.865Z,1520499245.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T08:54:05.866Z,1520499245.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:06.266Z,1520499246.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T08:54:06.267Z,1520499246.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:06.662Z,1520499246.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T08:54:06.663Z,1520499246.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:07.044Z,1520499247.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T08:54:07.045Z,1520499247.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:07.468Z,1520499247.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T08:54:07.469Z,1520499247.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:07.873Z,1520499247.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T08:54:07.874Z,1520499247.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:08.274Z,1520499248.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T08:54:08.275Z,1520499248.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:08.639Z,1520499248.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T08:54:08.640Z,1520499248.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:09.066Z,1520499249.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T08:54:09.067Z,1520499249.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:09.466Z,1520499249.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T08:54:09.467Z,1520499249.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:09.866Z,1520499249.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T08:54:09.867Z,1520499249.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:10.267Z,1520499250.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T08:54:10.268Z,1520499250.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:10.647Z,1520499250.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T08:54:10.648Z,1520499250.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:11.039Z,1520499251.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T08:54:11.040Z,1520499251.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:11.474Z,1520499251.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T08:54:11.475Z,1520499251.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:11.866Z,1520499251.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T08:54:11.867Z,1520499251.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:12.266Z,1520499252.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T08:54:12.267Z,1520499252.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:12.647Z,1520499252.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T08:54:12.648Z,1520499252.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:13.045Z,1520499253.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T08:54:13.046Z,1520499253.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:13.472Z,1520499253.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T08:54:13.473Z,1520499253.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:13.868Z,1520499253.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T08:54:13.869Z,1520499253.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:14.273Z,1520499254.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T08:54:14.274Z,1520499254.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:14.640Z,1520499254.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T08:54:14.641Z,1520499254.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:15.047Z,1520499255.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T08:54:15.048Z,1520499255.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:15.469Z,1520499255.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T08:54:15.470Z,1520499255.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:15.868Z,1520499255.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T08:54:15.873Z,1520499255.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:16.272Z,1520499256.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T08:54:16.273Z,1520499256.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:16.654Z,1520499256.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T08:54:16.655Z,1520499256.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:17.048Z,1520499257.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T08:54:17.049Z,1520499257.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:17.464Z,1520499257.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T08:54:17.485Z,1520499257.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:17.859Z,1520499257.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T08:54:17.860Z,1520499257.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:18.255Z,1520499258.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T08:54:18.257Z,1520499258.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:18.651Z,1520499258.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T08:54:18.652Z,1520499258.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:19.049Z,1520499259.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T08:54:19.050Z,1520499259.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:19.456Z,1520499259.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T08:54:19.457Z,1520499259.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:19.855Z,1520499259.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T08:54:19.857Z,1520499259.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:20.258Z,1520499260.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T08:54:20.259Z,1520499260.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:20.655Z,1520499260.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T08:54:20.656Z,1520499260.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:21.049Z,1520499261.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:21.454Z,1520499261.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:21.856Z,1520499261.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:22.260Z,1520499262.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:22.653Z,1520499262.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:23.044Z,1520499263.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:23.455Z,1520499263.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:23.860Z,1520499263.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:24.256Z,1520499264.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:24.658Z,1520499264.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:25.054Z,1520499265.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:25.456Z,1520499265.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:25.856Z,1520499265.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:26.267Z,1520499266.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:26.647Z,1520499266.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:27.050Z,1520499267.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:27.455Z,1520499267.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:27.857Z,1520499267.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:28.256Z,1520499268.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:28.651Z,1520499268.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:29.049Z,1520499269.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:29.457Z,1520499269.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:29.854Z,1520499269.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:30.257Z,1520499270.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:30.652Z,1520499270.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:31.050Z,1520499271.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:31.457Z,1520499271.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:31.861Z,1520499271.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:32.256Z,1520499272.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:32.650Z,1520499272.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:33.050Z,1520499273.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:33.456Z,1520499273.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:33.857Z,1520499273.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:34.261Z,1520499274.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:34.650Z,1520499274.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:35.048Z,1520499275.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:35.457Z,1520499275.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:35.855Z,1520499275.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:36.257Z,1520499276.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:36.651Z,1520499276.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:37.053Z,1520499277.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:37.456Z,1520499277.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:37.860Z,1520499277.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:38.262Z,1520499278.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:38.645Z,1520499278.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:39.055Z,1520499279.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:39.454Z,1520499279.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:39.855Z,1520499279.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:40.255Z,1520499280.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:40.653Z,1520499280.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:41.045Z,1520499281.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:41.455Z,1520499281.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:41.859Z,1520499281.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:42.256Z,1520499282.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:42.658Z,1520499282.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:43.050Z,1520499283.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:43.456Z,1520499283.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:43.856Z,1520499283.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:44.258Z,1520499284.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:44.645Z,1520499284.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:45.054Z,1520499285.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:45.455Z,1520499285.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:45.856Z,1520499285.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:46.255Z,1520499286.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:46.658Z,1520499286.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:47.044Z,1520499287.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:47.462Z,1520499287.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:47.860Z,1520499287.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:48.256Z,1520499288.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:48.652Z,1520499288.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:49.053Z,1520499289.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:49.456Z,1520499289.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:49.862Z,1520499289.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:50.256Z,1520499290.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:50.656Z,1520499290.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:51.053Z,1520499291.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:51.457Z,1520499291.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:51.860Z,1520499291.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:52.257Z,1520499292.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:52.650Z,1520499292.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:53.052Z,1520499293.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:53.460Z,1520499293.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:53.856Z,1520499293.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:54.256Z,1520499294.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:54.659Z,1520499294.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:55.054Z,1520499295.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:55.461Z,1520499295.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:55.860Z,1520499295.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:56.260Z,1520499296.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:56.655Z,1520499296.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:59.754Z,1520499299.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:54:59.895Z,1520499299.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:00.241Z,1520499300.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:00.643Z,1520499300.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:01.034Z,1520499301.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:01.422Z,1520499301.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:01.821Z,1520499301.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:02.222Z,1520499302.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:02.645Z,1520499302.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:03.026Z,1520499303.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:03.443Z,1520499303.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:03.827Z,1520499303.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:04.220Z,1520499304.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:04.619Z,1520499304.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:05.030Z,1520499305.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:05.424Z,1520499305.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:05.825Z,1520499305.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:06.228Z,1520499306.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:06.652Z,1520499306.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:07.018Z,1520499307.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:07.429Z,1520499307.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:07.829Z,1520499307.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:08.226Z,1520499308.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:08.628Z,1520499308.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:09.032Z,1520499309.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:09.429Z,1520499309.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:09.826Z,1520499309.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:10.223Z,1520499310.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:10.668Z,1520499310.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:11.021Z,1520499311.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:11.432Z,1520499311.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:11.829Z,1520499311.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:12.256Z,1520499312.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:12.626Z,1520499312.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:13.017Z,1520499313.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:13.423Z,1520499313.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:13.828Z,1520499313.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:14.232Z,1520499314.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:14.629Z,1520499314.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:15.025Z,1520499315.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:15.430Z,1520499315.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:15.826Z,1520499315.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:16.218Z,1520499316.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:16.628Z,1520499316.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:17.032Z,1520499317.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:17.428Z,1520499317.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:17.819Z,1520499317.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:18.231Z,1520499318.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:18.625Z,1520499318.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:19.018Z,1520499319.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:19.424Z,1520499319.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:19.828Z,1520499319.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:20.232Z,1520499320.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:20.628Z,1520499320.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:21.025Z,1520499321.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:21.426Z,1520499321.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:21.826Z,1520499321.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:22.226Z,1520499322.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:22.628Z,1520499322.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:23.032Z,1520499323.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:23.428Z,1520499323.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:23.819Z,1520499323.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:24.223Z,1520499324.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:24.626Z,1520499324.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:25.022Z,1520499325.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:25.426Z,1520499325.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:25.828Z,1520499325.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:26.228Z,1520499326.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:26.627Z,1520499326.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:27.026Z,1520499327.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:27.425Z,1520499327.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:27.824Z,1520499327.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:28.219Z,1520499328.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:28.623Z,1520499328.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:29.033Z,1520499329.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:29.432Z,1520499329.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:29.818Z,1520499329.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:30.223Z,1520499330.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:30.632Z,1520499330.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:31.030Z,1520499331.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:31.431Z,1520499331.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:31.832Z,1520499331.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:32.231Z,1520499332.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:32.634Z,1520499332.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:33.023Z,1520499333.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:33.426Z,1520499333.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:33.834Z,1520499333.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:34.232Z,1520499334.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:34.632Z,1520499334.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:35.025Z,1520499335.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:35.426Z,1520499335.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:35.828Z,1520499335.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:36.226Z,1520499336.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:36.636Z,1520499336.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:37.029Z,1520499337.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:37.435Z,1520499337.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:37.827Z,1520499337.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:38.230Z,1520499338.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:38.623Z,1520499338.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:39.030Z,1520499339.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:39.430Z,1520499339.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:39.836Z,1520499339.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:40.235Z,1520499340.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:40.637Z,1520499340.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:41.027Z,1520499341.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:41.425Z,1520499341.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:41.829Z,1520499341.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:42.231Z,1520499342.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:42.642Z,1520499342.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:43.032Z,1520499343.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:43.437Z,1520499343.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:43.826Z,1520499343.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:44.229Z,1520499344.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:44.624Z,1520499344.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:45.034Z,1520499345.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:45.430Z,1520499345.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:45.833Z,1520499345.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:46.237Z,1520499346.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:46.634Z,1520499346.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:47.029Z,1520499347.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:47.426Z,1520499347.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:47.830Z,1520499347.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:48.229Z,1520499348.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:48.637Z,1520499348.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:49.038Z,1520499349.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:49.433Z,1520499349.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:49.824Z,1520499349.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:50.229Z,1520499350.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:50.623Z,1520499350.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:51.026Z,1520499351.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:51.427Z,1520499351.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:51.833Z,1520499351.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:52.238Z,1520499352.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:52.633Z,1520499352.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:53.022Z,1520499353.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:53.434Z,1520499353.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:53.833Z,1520499353.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:54.234Z,1520499354.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:54.642Z,1520499354.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:55.030Z,1520499355.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:55.441Z,1520499355.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:55.837Z,1520499355.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:56.233Z,1520499356.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:56.633Z,1520499356.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:55:57.035Z,1520499357.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:00.129Z,1520499360.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:00.283Z,1520499360.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:00.612Z,1520499360.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:01.008Z,1520499361.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:01.404Z,1520499361.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:01.804Z,1520499361.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:02.202Z,1520499362.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:02.604Z,1520499362.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:03.009Z,1520499363.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:03.404Z,1520499363.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:03.793Z,1520499363.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:04.199Z,1520499364.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:04.603Z,1520499364.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:04.996Z,1520499364.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:05.407Z,1520499365.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:05.804Z,1520499365.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:06.204Z,1520499366.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:06.605Z,1520499366.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:07.001Z,1520499367.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:07.401Z,1520499367.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:07.799Z,1520499367.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:08.201Z,1520499368.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:08.603Z,1520499368.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:09.004Z,1520499369.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:09.405Z,1520499369.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:09.794Z,1520499369.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:10.198Z,1520499370.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:10.598Z,1520499370.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:10.994Z,1520499370.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:11.402Z,1520499371.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:11.804Z,1520499371.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:12.204Z,1520499372.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:12.604Z,1520499372.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:13.001Z,1520499373.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:13.401Z,1520499373.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:13.799Z,1520499373.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:14.203Z,1520499374.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:14.607Z,1520499374.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:15.008Z,1520499375.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:15.408Z,1520499375.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:15.796Z,1520499375.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:16.199Z,1520499376.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:16.598Z,1520499376.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:16.999Z,1520499376.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:17.398Z,1520499377.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:17.808Z,1520499377.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:18.244Z,1520499378.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:18.612Z,1520499378.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:19.000Z,1520499379.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:19.403Z,1520499379.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:19.803Z,1520499379.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:20.207Z,1520499380.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:20.611Z,1520499380.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:21.013Z,1520499381.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:21.412Z,1520499381.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:21.800Z,1520499381.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:22.201Z,1520499382.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:22.599Z,1520499382.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:22.999Z,1520499382.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:23.401Z,1520499383.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:23.810Z,1520499383.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:24.219Z,1520499384.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:24.618Z,1520499384.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:24.997Z,1520499384.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:25.406Z,1520499385.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:25.804Z,1520499385.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:26.206Z,1520499386.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:26.611Z,1520499386.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:27.013Z,1520499387.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:27.412Z,1520499387.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:27.799Z,1520499387.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:28.207Z,1520499388.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:28.613Z,1520499388.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:28.985Z,1520499388.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:29.409Z,1520499389.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:29.815Z,1520499389.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:30.234Z,1520499390.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:30.619Z,1520499390.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:31.007Z,1520499391.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:31.411Z,1520499391.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:31.811Z,1520499391.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:32.212Z,1520499392.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:32.608Z,1520499392.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:33.022Z,1520499393.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:33.414Z,1520499393.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:33.810Z,1520499393.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:34.211Z,1520499394.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:34.614Z,1520499394.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:35.001Z,1520499395.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:35.392Z,1520499395.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:35.815Z,1520499395.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:36.219Z,1520499396.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:36.623Z,1520499396.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:36.995Z,1520499396.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:37.414Z,1520499397.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:37.798Z,1520499397.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:38.194Z,1520499398.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:38.604Z,1520499398.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:39.027Z,1520499399.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:39.408Z,1520499399.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:39.798Z,1520499399.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:40.199Z,1520499400.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:40.601Z,1520499400.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:40.994Z,1520499400.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:41.405Z,1520499401.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:41.804Z,1520499401.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:42.230Z,1520499402.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:42.604Z,1520499402.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:43.003Z,1520499403.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:43.402Z,1520499403.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:43.803Z,1520499403.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:44.203Z,1520499404.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:44.604Z,1520499404.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:45.029Z,1520499405.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:45.409Z,1520499405.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:45.793Z,1520499405.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:46.202Z,1520499406.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:46.602Z,1520499406.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:46.994Z,1520499406.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:47.398Z,1520499407.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:47.809Z,1520499407.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:48.230Z,1520499408.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:48.604Z,1520499408.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:49.004Z,1520499409.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:49.395Z,1520499409.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:49.799Z,1520499409.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:50.211Z,1520499410.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:50.610Z,1520499410.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:51.023Z,1520499411.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:51.419Z,1520499411.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:51.812Z,1520499411.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:52.211Z,1520499412.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:52.616Z,1520499412.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:52.999Z,1520499412.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:53.399Z,1520499413.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:53.834Z,1520499413.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:54.200Z,1520499414.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:54.600Z,1520499414.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:54.999Z,1520499414.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:55.436Z,1520499415.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:55.807Z,1520499415.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:56.199Z,1520499416.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:56.628Z,1520499416.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:57.008Z,1520499417.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:56:57.409Z,1520499417.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:00.531Z,1520499420.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:00.667Z,1520499420.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:01.008Z,1520499421.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:01.409Z,1520499421.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:01.809Z,1520499421.809 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:01.809Z,1520499421.809 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25
2018-03-08T08:57:01.810Z,1520499421.810 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T08:57:01.811Z,1520499421.811 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:01.811Z,1520499421.811 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25
2018-03-08T08:57:01.811Z,1520499421.811 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T08:57:01.813Z,1520499421.813 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:01.813Z,1520499421.813 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 25
2018-03-08T08:57:01.814Z,1520499421.814 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T08:57:01.841Z,1520499421.841 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T08:57:01.842Z,1520499421.842 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T08:57:01.842Z,1520499421.842 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T08:57:02.219Z,1520499422.219 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T08:57:02.219Z,1520499422.219 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25
2018-03-08T08:57:02.220Z,1520499422.220 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T08:57:02.220Z,1520499422.220 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25
2018-03-08T08:57:02.236Z,1520499422.236 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T08:57:02.237Z,1520499422.237 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 25
2018-03-08T08:57:02.599Z,1520499422.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T08:57:02.599Z,1520499422.599 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:57:02.599Z,1520499422.599 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:57:02.600Z,1520499422.600 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T08:57:02.600Z,1520499422.600 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:57:02.601Z,1520499422.601 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:57:02.602Z,1520499422.602 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T08:57:02.602Z,1520499422.602 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T08:57:02.602Z,1520499422.602 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T08:57:03.005Z,1520499423.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T08:57:03.006Z,1520499423.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:03.411Z,1520499423.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T08:57:03.412Z,1520499423.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:03.814Z,1520499423.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T08:57:03.815Z,1520499423.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:04.222Z,1520499424.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T08:57:04.223Z,1520499424.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:04.623Z,1520499424.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T08:57:04.624Z,1520499424.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:05.007Z,1520499425.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T08:57:05.008Z,1520499425.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:05.408Z,1520499425.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T08:57:05.409Z,1520499425.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:05.802Z,1520499425.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T08:57:05.803Z,1520499425.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:06.242Z,1520499426.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T08:57:06.243Z,1520499426.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:06.614Z,1520499426.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T08:57:06.615Z,1520499426.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:07.023Z,1520499427.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T08:57:07.024Z,1520499427.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:07.420Z,1520499427.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T08:57:07.421Z,1520499427.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:07.810Z,1520499427.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T08:57:07.811Z,1520499427.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:08.214Z,1520499428.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T08:57:08.215Z,1520499428.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:08.609Z,1520499428.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T08:57:08.610Z,1520499428.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:08.996Z,1520499428.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T08:57:08.997Z,1520499428.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:09.410Z,1520499429.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T08:57:09.411Z,1520499429.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:09.813Z,1520499429.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T08:57:09.814Z,1520499429.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:10.216Z,1520499430.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T08:57:10.217Z,1520499430.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:10.614Z,1520499430.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T08:57:10.615Z,1520499430.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:11.008Z,1520499431.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T08:57:11.009Z,1520499431.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:11.414Z,1520499431.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T08:57:11.415Z,1520499431.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:11.810Z,1520499431.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T08:57:11.811Z,1520499431.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:12.267Z,1520499432.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-08T08:57:12.268Z,1520499432.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:12.622Z,1520499432.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T08:57:12.623Z,1520499432.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:13.026Z,1520499433.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T08:57:13.027Z,1520499433.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:13.417Z,1520499433.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T08:57:13.418Z,1520499433.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:13.812Z,1520499433.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T08:57:13.813Z,1520499433.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:14.213Z,1520499434.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T08:57:14.213Z,1520499434.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:14.613Z,1520499434.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T08:57:14.614Z,1520499434.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:15.014Z,1520499435.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T08:57:15.015Z,1520499435.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:15.413Z,1520499435.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T08:57:15.414Z,1520499435.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:15.825Z,1520499435.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T08:57:15.825Z,1520499435.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:16.222Z,1520499436.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T08:57:16.223Z,1520499436.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:16.624Z,1520499436.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T08:57:16.625Z,1520499436.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:17.010Z,1520499437.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T08:57:17.011Z,1520499437.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:17.418Z,1520499437.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T08:57:17.419Z,1520499437.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:17.799Z,1520499437.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T08:57:17.799Z,1520499437.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:18.299Z,1520499438.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T08:57:18.300Z,1520499438.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:18.604Z,1520499438.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T08:57:18.617Z,1520499438.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:19.026Z,1520499439.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T08:57:19.027Z,1520499439.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:19.426Z,1520499439.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T08:57:19.427Z,1520499439.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:19.803Z,1520499439.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T08:57:19.804Z,1520499439.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:20.202Z,1520499440.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T08:57:20.202Z,1520499440.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:20.603Z,1520499440.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T08:57:20.604Z,1520499440.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:21.023Z,1520499441.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T08:57:21.024Z,1520499441.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:21.407Z,1520499441.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T08:57:21.408Z,1520499441.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:21.831Z,1520499441.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:22.230Z,1520499442.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:22.630Z,1520499442.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:23.007Z,1520499443.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:23.399Z,1520499443.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:23.803Z,1520499443.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:24.204Z,1520499444.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:24.611Z,1520499444.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:25.031Z,1520499445.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:25.431Z,1520499445.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:25.795Z,1520499445.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:26.203Z,1520499446.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:26.611Z,1520499446.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:27.001Z,1520499447.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:27.402Z,1520499447.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:27.809Z,1520499447.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:28.216Z,1520499448.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:28.608Z,1520499448.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:29.003Z,1520499449.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:29.401Z,1520499449.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:29.806Z,1520499449.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:30.211Z,1520499450.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:30.615Z,1520499450.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:31.012Z,1520499451.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:31.414Z,1520499451.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:31.811Z,1520499451.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:32.206Z,1520499452.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:32.607Z,1520499452.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:33.006Z,1520499453.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:33.406Z,1520499453.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:33.813Z,1520499453.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:34.212Z,1520499454.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:34.609Z,1520499454.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:35.013Z,1520499455.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:35.411Z,1520499455.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:35.812Z,1520499455.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:36.214Z,1520499456.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:36.622Z,1520499456.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:37.026Z,1520499457.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:37.417Z,1520499457.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:37.807Z,1520499457.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:38.212Z,1520499458.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:38.611Z,1520499458.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:39.010Z,1520499459.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:39.410Z,1520499459.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:39.820Z,1520499459.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:40.223Z,1520499460.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:40.626Z,1520499460.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:41.009Z,1520499461.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:41.407Z,1520499461.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:41.808Z,1520499461.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:42.210Z,1520499462.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:42.613Z,1520499462.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:43.017Z,1520499463.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:43.416Z,1520499463.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:43.809Z,1520499463.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:44.208Z,1520499464.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:44.610Z,1520499464.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:45.008Z,1520499465.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:45.411Z,1520499465.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:45.816Z,1520499465.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:46.226Z,1520499466.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:46.616Z,1520499466.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:47.010Z,1520499467.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:47.410Z,1520499467.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:47.809Z,1520499467.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:48.210Z,1520499468.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:48.611Z,1520499468.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:49.019Z,1520499469.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:49.417Z,1520499469.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:49.813Z,1520499469.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:50.215Z,1520499470.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:50.611Z,1520499470.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:51.013Z,1520499471.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:51.414Z,1520499471.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:51.818Z,1520499471.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:52.226Z,1520499472.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:52.622Z,1520499472.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:53.017Z,1520499473.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:53.416Z,1520499473.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:53.818Z,1520499473.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:54.197Z,1520499474.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:54.618Z,1520499474.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:55.026Z,1520499475.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:55.420Z,1520499475.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:55.818Z,1520499475.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:56.199Z,1520499476.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:56.202Z,1520499476.202 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T08:52:55.9Z
2018-03-08T08:57:56.202Z,1520499476.202 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T08:57:56.202Z,1520499476.202 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T08:57:56.610Z,1520499476.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:57.190Z,1520499477.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:57:57.409Z,1520499477.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:00.543Z,1520499480.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:00.695Z,1520499480.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:00.973Z,1520499480.973 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0028.lzma
2018-03-08T08:58:01.033Z,1520499481.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:01.410Z,1520499481.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:01.771Z,1520499481.771 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0028.lzma.bak
2018-03-08T08:58:01.771Z,1520499481.771 [DataOverHttps](INFO): SBD MOMSN=7984303
2018-03-08T08:58:01.838Z,1520499481.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:02.452Z,1520499482.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:02.642Z,1520499482.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:03.042Z,1520499483.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:06.118Z,1520499486.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:06.247Z,1520499486.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:06.619Z,1520499486.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:07.012Z,1520499487.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:07.419Z,1520499487.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:07.842Z,1520499487.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:08.224Z,1520499488.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:11.351Z,1520499491.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:11.491Z,1520499491.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:11.785Z,1520499491.785 [DataOverHttps](INFO): Sending 97 bytes from file Logs/20180308T074127/Express0029.lzma
2018-03-08T08:58:11.847Z,1520499491.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:12.225Z,1520499492.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:12.583Z,1520499492.583 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0029.lzma.bak
2018-03-08T08:58:12.583Z,1520499492.583 [DataOverHttps](INFO): SBD MOMSN=7984305
2018-03-08T08:58:12.626Z,1520499492.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:13.202Z,1520499493.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:13.205Z,1520499493.205 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T08:58:13.205Z,1520499493.205 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T08:58:13.205Z,1520499493.205 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T08:58:13.445Z,1520499493.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:16.547Z,1520499496.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:16.698Z,1520499496.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:17.050Z,1520499497.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:17.418Z,1520499497.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:17.821Z,1520499497.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:18.220Z,1520499498.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:18.653Z,1520499498.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:19.056Z,1520499499.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:19.428Z,1520499499.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:19.824Z,1520499499.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:20.215Z,1520499500.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:20.627Z,1520499500.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:21.023Z,1520499501.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:21.427Z,1520499501.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:21.782Z,1520499501.782 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T08:58:21.782Z,1520499501.782 [NAL9602] Data Fault, FailCount= 3
2018-03-08T08:58:21.782Z,1520499501.782 [NAL9602](ERROR): Data Fault
2018-03-08T08:58:21.834Z,1520499501.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:21.868Z,1520499501.868 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T08:58:22.182Z,1520499502.182 [NAL9602](INFO): Powering down
2018-03-08T08:58:22.230Z,1520499502.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:22.614Z,1520499502.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:23.017Z,1520499503.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:23.029Z,1520499503.029 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T08:58:23.029Z,1520499503.029 [NAL9602] No Fault, FailCount= 3
2018-03-08T08:58:23.422Z,1520499503.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:23.821Z,1520499503.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:24.217Z,1520499504.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:24.614Z,1520499504.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:25.021Z,1520499505.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:25.417Z,1520499505.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:25.813Z,1520499505.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:26.222Z,1520499506.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:26.618Z,1520499506.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:27.021Z,1520499507.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:27.422Z,1520499507.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:27.820Z,1520499507.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:28.221Z,1520499508.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:28.621Z,1520499508.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:29.018Z,1520499509.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:29.420Z,1520499509.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:29.821Z,1520499509.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:30.277Z,1520499510.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:30.612Z,1520499510.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:31.021Z,1520499511.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:31.418Z,1520499511.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:31.821Z,1520499511.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:32.222Z,1520499512.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:32.618Z,1520499512.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:33.021Z,1520499513.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:33.421Z,1520499513.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:33.818Z,1520499513.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:34.215Z,1520499514.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:34.621Z,1520499514.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:35.018Z,1520499515.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:35.421Z,1520499515.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:35.818Z,1520499515.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:36.217Z,1520499516.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:36.641Z,1520499516.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:37.012Z,1520499517.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:37.413Z,1520499517.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:37.810Z,1520499517.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:38.207Z,1520499518.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:38.609Z,1520499518.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:39.003Z,1520499519.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:39.435Z,1520499519.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:39.830Z,1520499519.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:40.215Z,1520499520.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:40.619Z,1520499520.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:41.019Z,1520499521.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:41.417Z,1520499521.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:41.816Z,1520499521.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:42.286Z,1520499522.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:42.610Z,1520499522.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:43.019Z,1520499523.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:43.419Z,1520499523.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:43.815Z,1520499523.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:44.219Z,1520499524.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:44.615Z,1520499524.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:45.014Z,1520499525.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:45.419Z,1520499525.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:45.815Z,1520499525.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:46.213Z,1520499526.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:46.619Z,1520499526.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:47.015Z,1520499527.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:47.419Z,1520499527.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:47.819Z,1520499527.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:48.242Z,1520499528.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:48.615Z,1520499528.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:49.019Z,1520499529.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:49.419Z,1520499529.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:49.815Z,1520499529.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:50.220Z,1520499530.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:50.620Z,1520499530.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:51.019Z,1520499531.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:51.416Z,1520499531.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:51.819Z,1520499531.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:52.189Z,1520499532.189 [NAL9602](INFO): Powering up NAL9602
2018-03-08T08:58:52.221Z,1520499532.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:52.615Z,1520499532.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:53.026Z,1520499533.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:53.421Z,1520499533.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:53.812Z,1520499533.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:54.231Z,1520499534.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:54.621Z,1520499534.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:55.016Z,1520499535.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:55.426Z,1520499535.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:55.822Z,1520499535.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:56.222Z,1520499536.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:56.623Z,1520499536.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:57.022Z,1520499537.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:57.422Z,1520499537.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:57.819Z,1520499537.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:58.214Z,1520499538.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:58.615Z,1520499538.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:59.019Z,1520499539.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:59.420Z,1520499539.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:58:59.815Z,1520499539.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:00.220Z,1520499540.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:00.619Z,1520499540.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:01.011Z,1520499541.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:01.417Z,1520499541.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:01.817Z,1520499541.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:02.214Z,1520499542.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:02.617Z,1520499542.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:03.030Z,1520499543.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:03.376Z,1520499543.376 [NAL9602](INFO): NAL9602 initialized
2018-03-08T08:59:03.423Z,1520499543.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:03.817Z,1520499543.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:04.224Z,1520499544.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:04.624Z,1520499544.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:05.025Z,1520499545.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:05.421Z,1520499545.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:05.819Z,1520499545.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:06.227Z,1520499546.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:06.621Z,1520499546.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:07.030Z,1520499547.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:07.428Z,1520499547.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:07.830Z,1520499547.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:08.217Z,1520499548.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:08.618Z,1520499548.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:09.025Z,1520499549.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:09.428Z,1520499549.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:09.830Z,1520499549.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:10.222Z,1520499550.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:10.617Z,1520499550.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:11.023Z,1520499551.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:11.428Z,1520499551.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:11.835Z,1520499551.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:12.230Z,1520499552.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:12.623Z,1520499552.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:13.035Z,1520499553.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:13.428Z,1520499553.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:13.829Z,1520499553.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:16.925Z,1520499556.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:17.062Z,1520499557.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:17.430Z,1520499557.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:17.825Z,1520499557.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:18.230Z,1520499558.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:18.619Z,1520499558.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:19.010Z,1520499559.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:19.414Z,1520499559.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:19.808Z,1520499559.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:20.217Z,1520499560.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:20.627Z,1520499560.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:21.019Z,1520499561.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:21.418Z,1520499561.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:21.811Z,1520499561.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:22.213Z,1520499562.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:22.615Z,1520499562.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:23.021Z,1520499563.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:23.421Z,1520499563.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:23.819Z,1520499563.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:24.217Z,1520499564.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:24.617Z,1520499564.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:25.022Z,1520499565.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:25.424Z,1520499565.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:25.826Z,1520499565.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:26.219Z,1520499566.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:26.617Z,1520499566.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:27.019Z,1520499567.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:27.421Z,1520499567.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:27.821Z,1520499567.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:28.218Z,1520499568.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:28.621Z,1520499568.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:29.021Z,1520499569.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:29.423Z,1520499569.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:29.822Z,1520499569.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:30.217Z,1520499570.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:30.617Z,1520499570.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:31.023Z,1520499571.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:31.430Z,1520499571.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:31.823Z,1520499571.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:32.220Z,1520499572.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:32.603Z,1520499572.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:33.028Z,1520499573.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:33.430Z,1520499573.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:33.805Z,1520499573.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:34.207Z,1520499574.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:34.606Z,1520499574.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:35.033Z,1520499575.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:35.437Z,1520499575.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:35.811Z,1520499575.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:36.204Z,1520499576.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:36.615Z,1520499576.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:37.042Z,1520499577.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:37.414Z,1520499577.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:37.841Z,1520499577.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:38.219Z,1520499578.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:38.601Z,1520499578.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:39.012Z,1520499579.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:39.415Z,1520499579.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:39.811Z,1520499579.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:40.218Z,1520499580.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:40.618Z,1520499580.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:41.017Z,1520499581.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:41.415Z,1520499581.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:41.816Z,1520499581.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:42.206Z,1520499582.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:42.615Z,1520499582.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:43.020Z,1520499583.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:43.427Z,1520499583.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:43.827Z,1520499583.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:44.211Z,1520499584.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:44.611Z,1520499584.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:45.027Z,1520499585.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:45.421Z,1520499585.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:45.819Z,1520499585.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:46.211Z,1520499586.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:46.612Z,1520499586.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:47.017Z,1520499587.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:47.420Z,1520499587.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:47.826Z,1520499587.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:48.209Z,1520499588.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:48.610Z,1520499588.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:49.021Z,1520499589.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:49.423Z,1520499589.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:49.816Z,1520499589.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:50.215Z,1520499590.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:50.611Z,1520499590.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:51.012Z,1520499591.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:51.450Z,1520499591.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:51.815Z,1520499591.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:52.208Z,1520499592.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:52.610Z,1520499592.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:53.022Z,1520499593.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:53.419Z,1520499593.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:53.820Z,1520499593.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:54.213Z,1520499594.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:54.610Z,1520499594.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:55.020Z,1520499595.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:55.426Z,1520499595.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:55.819Z,1520499595.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:56.212Z,1520499596.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:56.610Z,1520499596.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:57.032Z,1520499597.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:57.420Z,1520499597.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:57.825Z,1520499597.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:58.212Z,1520499598.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:58.606Z,1520499598.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:59.019Z,1520499599.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:59.431Z,1520499599.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T08:59:59.830Z,1520499599.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:00.219Z,1520499600.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:00.609Z,1520499600.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:01.032Z,1520499601.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:01.431Z,1520499601.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:01.821Z,1520499601.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:02.209Z,1520499602.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:02.613Z,1520499602.613 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:02.613Z,1520499602.613 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26
2018-03-08T09:00:02.613Z,1520499602.613 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T09:00:02.615Z,1520499602.615 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:02.615Z,1520499602.615 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26
2018-03-08T09:00:02.615Z,1520499602.615 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T09:00:02.617Z,1520499602.617 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:02.617Z,1520499602.617 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 26
2018-03-08T09:00:02.617Z,1520499602.617 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T09:00:02.630Z,1520499602.630 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T09:00:02.630Z,1520499602.630 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T09:00:02.630Z,1520499602.630 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T09:00:03.062Z,1520499603.062 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T09:00:03.062Z,1520499603.062 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26
2018-03-08T09:00:03.063Z,1520499603.063 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T09:00:03.063Z,1520499603.063 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26
2018-03-08T09:00:03.063Z,1520499603.063 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T09:00:03.063Z,1520499603.063 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 26
2018-03-08T09:00:03.420Z,1520499603.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T09:00:03.421Z,1520499603.421 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:00:03.421Z,1520499603.421 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:00:03.421Z,1520499603.421 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T09:00:03.422Z,1520499603.422 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:00:03.422Z,1520499603.422 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:00:03.422Z,1520499603.422 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T09:00:03.423Z,1520499603.423 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:00:03.423Z,1520499603.423 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:00:03.827Z,1520499603.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T09:00:03.828Z,1520499603.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:04.220Z,1520499604.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T09:00:04.221Z,1520499604.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:04.624Z,1520499604.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T09:00:04.625Z,1520499604.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:05.020Z,1520499605.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T09:00:05.025Z,1520499605.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:05.421Z,1520499605.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T09:00:05.422Z,1520499605.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:05.824Z,1520499605.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T09:00:05.825Z,1520499605.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:06.201Z,1520499606.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T09:00:06.202Z,1520499606.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:06.626Z,1520499606.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T09:00:06.627Z,1520499606.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:07.033Z,1520499607.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T09:00:07.034Z,1520499607.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:07.430Z,1520499607.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T09:00:07.431Z,1520499607.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:07.828Z,1520499607.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T09:00:07.829Z,1520499607.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:08.204Z,1520499608.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T09:00:08.205Z,1520499608.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:08.603Z,1520499608.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T09:00:08.604Z,1520499608.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:09.012Z,1520499609.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T09:00:09.025Z,1520499609.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:09.436Z,1520499609.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T09:00:09.437Z,1520499609.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:09.804Z,1520499609.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T09:00:09.805Z,1520499609.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:10.210Z,1520499610.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T09:00:10.211Z,1520499610.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:10.603Z,1520499610.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T09:00:10.604Z,1520499610.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:11.008Z,1520499611.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T09:00:11.009Z,1520499611.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:11.435Z,1520499611.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T09:00:11.436Z,1520499611.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:11.814Z,1520499611.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T09:00:11.815Z,1520499611.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:12.206Z,1520499612.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T09:00:12.207Z,1520499612.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:12.614Z,1520499612.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T09:00:12.615Z,1520499612.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:13.019Z,1520499613.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T09:00:13.043Z,1520499613.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:13.414Z,1520499613.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T09:00:13.415Z,1520499613.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:13.820Z,1520499613.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T09:00:13.837Z,1520499613.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:14.211Z,1520499614.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T09:00:14.212Z,1520499614.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:17.311Z,1520499617.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-03-08T09:00:17.312Z,1520499617.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:17.450Z,1520499617.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T09:00:17.451Z,1520499617.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:17.816Z,1520499617.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T09:00:17.817Z,1520499617.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:18.214Z,1520499618.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T09:00:18.215Z,1520499618.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:18.614Z,1520499618.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T09:00:18.615Z,1520499618.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:19.006Z,1520499619.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T09:00:19.007Z,1520499619.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:19.407Z,1520499619.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T09:00:19.408Z,1520499619.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:19.806Z,1520499619.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T09:00:19.807Z,1520499619.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:20.213Z,1520499620.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T09:00:20.214Z,1520499620.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:20.612Z,1520499620.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T09:00:20.613Z,1520499620.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:21.022Z,1520499621.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T09:00:21.023Z,1520499621.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:21.405Z,1520499621.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T09:00:21.406Z,1520499621.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:21.802Z,1520499621.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T09:00:21.803Z,1520499621.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:22.204Z,1520499622.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T09:00:22.205Z,1520499622.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:22.606Z,1520499622.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T09:00:22.607Z,1520499622.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:23.018Z,1520499623.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:23.420Z,1520499623.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:23.822Z,1520499623.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:24.203Z,1520499624.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:24.606Z,1520499624.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:25.013Z,1520499625.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:25.416Z,1520499625.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:25.816Z,1520499625.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:26.202Z,1520499626.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:26.601Z,1520499626.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:27.016Z,1520499627.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:27.414Z,1520499627.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:27.809Z,1520499627.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:28.205Z,1520499628.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:28.611Z,1520499628.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:29.013Z,1520499629.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:29.415Z,1520499629.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:29.815Z,1520499629.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:30.208Z,1520499630.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:30.615Z,1520499630.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:31.013Z,1520499631.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:31.416Z,1520499631.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:31.817Z,1520499631.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:32.207Z,1520499632.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:32.602Z,1520499632.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:33.013Z,1520499633.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:33.422Z,1520499633.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:33.811Z,1520499633.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:34.205Z,1520499634.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:34.610Z,1520499634.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:35.014Z,1520499635.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:35.423Z,1520499635.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:35.822Z,1520499635.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:36.209Z,1520499636.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:36.611Z,1520499636.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:37.016Z,1520499637.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:37.415Z,1520499637.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:37.816Z,1520499637.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:38.208Z,1520499638.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:38.602Z,1520499638.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:39.012Z,1520499639.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:39.416Z,1520499639.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:39.813Z,1520499639.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:40.204Z,1520499640.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:40.615Z,1520499640.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:41.013Z,1520499641.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:41.415Z,1520499641.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:41.815Z,1520499641.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:42.208Z,1520499642.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:42.606Z,1520499642.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:43.018Z,1520499643.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:43.417Z,1520499643.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:43.816Z,1520499643.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:44.204Z,1520499644.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:44.603Z,1520499644.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:45.013Z,1520499645.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:45.415Z,1520499645.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:45.822Z,1520499645.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:46.208Z,1520499646.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:46.606Z,1520499646.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:47.017Z,1520499647.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:47.422Z,1520499647.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:47.822Z,1520499647.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:48.209Z,1520499648.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:48.603Z,1520499648.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:49.017Z,1520499649.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:49.413Z,1520499649.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:49.817Z,1520499649.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:50.208Z,1520499650.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:50.604Z,1520499650.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:51.018Z,1520499651.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:51.413Z,1520499651.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:51.817Z,1520499651.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:52.210Z,1520499652.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:52.608Z,1520499652.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:53.019Z,1520499653.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:53.421Z,1520499653.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:53.817Z,1520499653.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:54.203Z,1520499654.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:54.615Z,1520499654.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:55.018Z,1520499655.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:55.413Z,1520499655.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:55.817Z,1520499655.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:56.208Z,1520499656.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:56.606Z,1520499656.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:57.017Z,1520499657.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:57.414Z,1520499657.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:57.818Z,1520499657.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:58.213Z,1520499658.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:58.614Z,1520499658.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:59.018Z,1520499659.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:59.419Z,1520499659.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:00:59.818Z,1520499659.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:00.214Z,1520499660.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:00.612Z,1520499660.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:01.018Z,1520499661.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:01.421Z,1520499661.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:01.823Z,1520499661.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:02.194Z,1520499662.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:02.598Z,1520499662.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:03.024Z,1520499663.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:03.423Z,1520499663.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:03.824Z,1520499663.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:04.208Z,1520499664.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:04.598Z,1520499664.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:05.031Z,1520499665.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:05.431Z,1520499665.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:05.826Z,1520499665.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:06.196Z,1520499666.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:06.591Z,1520499666.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:07.008Z,1520499667.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:07.430Z,1520499667.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:07.824Z,1520499667.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:08.203Z,1520499668.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:08.603Z,1520499668.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:09.026Z,1520499669.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:09.424Z,1520499669.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:09.812Z,1520499669.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:10.210Z,1520499670.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:10.608Z,1520499670.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:11.008Z,1520499671.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:11.434Z,1520499671.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:11.808Z,1520499671.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:12.226Z,1520499672.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:12.618Z,1520499672.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:13.019Z,1520499673.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:13.423Z,1520499673.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:13.819Z,1520499673.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:14.215Z,1520499674.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:14.613Z,1520499674.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:17.727Z,1520499677.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:17.874Z,1520499677.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:18.222Z,1520499678.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:18.597Z,1520499678.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:18.992Z,1520499678.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:19.398Z,1520499679.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:19.794Z,1520499679.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:20.222Z,1520499680.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:20.623Z,1520499680.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:21.027Z,1520499681.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:21.394Z,1520499681.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:21.802Z,1520499681.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:22.198Z,1520499682.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:22.591Z,1520499682.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:23.021Z,1520499683.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:23.403Z,1520499683.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:23.823Z,1520499683.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:24.224Z,1520499684.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:24.598Z,1520499684.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:24.997Z,1520499684.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:25.420Z,1520499685.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:25.807Z,1520499685.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:26.197Z,1520499686.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:26.600Z,1520499686.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:27.028Z,1520499687.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:27.400Z,1520499687.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:27.826Z,1520499687.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:28.199Z,1520499688.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:28.598Z,1520499688.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:29.025Z,1520499689.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:29.408Z,1520499689.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:29.797Z,1520499689.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:30.202Z,1520499690.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:30.600Z,1520499690.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:30.996Z,1520499690.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:31.423Z,1520499691.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:31.812Z,1520499691.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:32.200Z,1520499692.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:32.599Z,1520499692.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:33.004Z,1520499693.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:33.433Z,1520499693.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:33.800Z,1520499693.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:34.201Z,1520499694.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:34.598Z,1520499694.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:35.005Z,1520499695.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:35.408Z,1520499695.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:35.803Z,1520499695.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:36.205Z,1520499696.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:36.602Z,1520499696.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:37.009Z,1520499697.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:37.411Z,1520499697.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:37.812Z,1520499697.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:38.205Z,1520499698.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:38.603Z,1520499698.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:39.012Z,1520499699.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:39.418Z,1520499699.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:39.811Z,1520499699.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:40.204Z,1520499700.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:40.609Z,1520499700.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:41.009Z,1520499701.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:41.022Z,1520499701.022 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T09:01:41.410Z,1520499701.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:41.813Z,1520499701.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:42.204Z,1520499702.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:42.601Z,1520499702.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:43.009Z,1520499703.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:43.426Z,1520499703.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:43.813Z,1520499703.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:44.205Z,1520499704.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:44.607Z,1520499704.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:45.014Z,1520499705.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:45.416Z,1520499705.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:45.817Z,1520499705.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:46.212Z,1520499706.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:46.583Z,1520499706.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:47.017Z,1520499707.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:47.415Z,1520499707.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:47.811Z,1520499707.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:48.219Z,1520499708.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:48.621Z,1520499708.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:49.013Z,1520499709.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:49.420Z,1520499709.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:49.830Z,1520499709.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:50.195Z,1520499710.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:50.599Z,1520499710.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:51.022Z,1520499711.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:51.426Z,1520499711.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:51.824Z,1520499711.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:52.196Z,1520499712.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:52.592Z,1520499712.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:53.024Z,1520499713.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:53.421Z,1520499713.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:53.804Z,1520499713.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:54.200Z,1520499714.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:54.626Z,1520499714.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:55.000Z,1520499715.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:55.412Z,1520499715.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:55.834Z,1520499715.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:56.206Z,1520499716.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:56.601Z,1520499716.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:57.032Z,1520499717.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:57.414Z,1520499717.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:57.814Z,1520499717.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:58.205Z,1520499718.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:58.599Z,1520499718.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:59.008Z,1520499719.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:59.413Z,1520499719.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:01:59.807Z,1520499719.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:00.204Z,1520499720.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:00.627Z,1520499720.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:01.008Z,1520499721.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:01.411Z,1520499721.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:01.812Z,1520499721.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:02.209Z,1520499722.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:02.599Z,1520499722.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:03.018Z,1520499723.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:03.412Z,1520499723.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:03.818Z,1520499723.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:04.203Z,1520499724.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:04.602Z,1520499724.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:05.013Z,1520499725.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:05.409Z,1520499725.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:05.805Z,1520499725.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:06.233Z,1520499726.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:06.601Z,1520499726.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:07.014Z,1520499727.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:07.413Z,1520499727.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:07.813Z,1520499727.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:08.203Z,1520499728.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:08.601Z,1520499728.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:09.011Z,1520499729.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:09.418Z,1520499729.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:09.818Z,1520499729.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:10.204Z,1520499730.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:10.602Z,1520499730.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:11.011Z,1520499731.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:11.409Z,1520499731.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:11.812Z,1520499731.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:12.202Z,1520499732.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:12.605Z,1520499732.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:13.011Z,1520499733.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:13.411Z,1520499733.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:13.812Z,1520499733.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:14.210Z,1520499734.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:14.606Z,1520499734.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:15.009Z,1520499735.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:15.422Z,1520499735.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:18.513Z,1520499738.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:18.647Z,1520499738.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:18.993Z,1520499738.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:19.396Z,1520499739.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:19.785Z,1520499739.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:20.199Z,1520499740.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:20.673Z,1520499740.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:20.997Z,1520499740.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:21.382Z,1520499741.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:21.777Z,1520499741.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:22.175Z,1520499742.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:22.603Z,1520499742.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:22.975Z,1520499742.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:23.381Z,1520499743.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:23.792Z,1520499743.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:24.194Z,1520499744.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:24.572Z,1520499744.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:24.976Z,1520499744.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:25.383Z,1520499745.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:25.774Z,1520499745.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:26.190Z,1520499746.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:26.634Z,1520499746.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:27.002Z,1520499747.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:27.398Z,1520499747.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:27.774Z,1520499747.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:28.175Z,1520499748.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:28.583Z,1520499748.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:28.981Z,1520499748.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:29.409Z,1520499749.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:29.809Z,1520499749.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:30.209Z,1520499750.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:30.576Z,1520499750.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:30.980Z,1520499750.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:31.382Z,1520499751.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:31.776Z,1520499751.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:32.209Z,1520499752.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:32.606Z,1520499752.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:32.984Z,1520499752.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:33.386Z,1520499753.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:33.781Z,1520499753.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:34.183Z,1520499754.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:34.583Z,1520499754.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:35.007Z,1520499755.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:35.402Z,1520499755.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:35.802Z,1520499755.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:36.183Z,1520499756.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:36.577Z,1520499756.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:37.003Z,1520499757.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:37.404Z,1520499757.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:37.807Z,1520499757.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:38.183Z,1520499758.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:38.583Z,1520499758.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:38.981Z,1520499758.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:39.402Z,1520499759.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:39.804Z,1520499759.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:40.186Z,1520499760.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:40.605Z,1520499760.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:41.003Z,1520499761.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:41.385Z,1520499761.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:41.807Z,1520499761.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:42.186Z,1520499762.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:42.579Z,1520499762.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:43.005Z,1520499763.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:43.404Z,1520499763.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:43.781Z,1520499763.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:44.187Z,1520499764.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:44.584Z,1520499764.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:44.982Z,1520499764.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:45.403Z,1520499765.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:45.807Z,1520499765.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:46.181Z,1520499766.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:46.584Z,1520499766.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:46.983Z,1520499766.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:47.408Z,1520499767.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:47.804Z,1520499767.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:48.213Z,1520499768.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:48.577Z,1520499768.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:48.983Z,1520499768.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:49.384Z,1520499769.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:49.786Z,1520499769.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:50.189Z,1520499770.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:50.612Z,1520499770.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:50.981Z,1520499770.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:51.384Z,1520499771.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:51.783Z,1520499771.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:52.185Z,1520499772.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:52.583Z,1520499772.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:52.992Z,1520499772.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:53.409Z,1520499773.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:53.796Z,1520499773.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:54.184Z,1520499774.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:54.579Z,1520499774.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:54.996Z,1520499774.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:55.392Z,1520499775.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:55.792Z,1520499775.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:56.189Z,1520499776.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:56.587Z,1520499776.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:56.992Z,1520499776.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:57.392Z,1520499777.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:57.798Z,1520499777.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:58.178Z,1520499778.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:58.590Z,1520499778.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:58.987Z,1520499778.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:59.398Z,1520499779.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:02:59.792Z,1520499779.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:00.222Z,1520499780.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:00.589Z,1520499780.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:00.988Z,1520499780.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:01.388Z,1520499781.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:01.781Z,1520499781.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:02.193Z,1520499782.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:02.592Z,1520499782.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:02.994Z,1520499782.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:03.387Z,1520499783.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:03.788Z,1520499783.788 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:03.789Z,1520499783.789 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27
2018-03-08T09:03:03.789Z,1520499783.789 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T09:03:03.790Z,1520499783.790 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:03.790Z,1520499783.790 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27
2018-03-08T09:03:03.791Z,1520499783.791 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T09:03:03.792Z,1520499783.792 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:03.792Z,1520499783.792 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 27
2018-03-08T09:03:03.792Z,1520499783.792 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T09:03:03.804Z,1520499783.804 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T09:03:03.804Z,1520499783.804 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T09:03:03.804Z,1520499783.804 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T09:03:04.197Z,1520499784.197 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T09:03:04.197Z,1520499784.197 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27
2018-03-08T09:03:04.198Z,1520499784.198 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T09:03:04.198Z,1520499784.198 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27
2018-03-08T09:03:04.198Z,1520499784.198 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T09:03:04.198Z,1520499784.198 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 27
2018-03-08T09:03:04.595Z,1520499784.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T09:03:04.595Z,1520499784.595 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:03:04.596Z,1520499784.596 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:03:04.596Z,1520499784.596 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T09:03:04.597Z,1520499784.597 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:03:04.597Z,1520499784.597 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:03:04.597Z,1520499784.597 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T09:03:04.598Z,1520499784.598 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:03:04.598Z,1520499784.598 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:03:04.998Z,1520499784.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T09:03:04.999Z,1520499784.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:05.399Z,1520499785.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T09:03:05.400Z,1520499785.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:05.793Z,1520499785.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T09:03:05.794Z,1520499785.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:06.206Z,1520499786.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T09:03:06.207Z,1520499786.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:06.576Z,1520499786.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T09:03:06.577Z,1520499786.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:06.999Z,1520499786.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T09:03:06.000Z,1520499787.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:07.400Z,1520499787.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T09:03:07.401Z,1520499787.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:07.775Z,1520499787.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T09:03:07.777Z,1520499787.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:08.199Z,1520499788.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T09:03:08.201Z,1520499788.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:08.599Z,1520499788.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T09:03:08.600Z,1520499788.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:08.984Z,1520499788.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T09:03:09.001Z,1520499789.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:09.386Z,1520499789.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T09:03:09.387Z,1520499789.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:09.783Z,1520499789.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T09:03:09.784Z,1520499789.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:10.186Z,1520499790.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T09:03:10.187Z,1520499790.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:10.586Z,1520499790.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T09:03:10.587Z,1520499790.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:10.988Z,1520499790.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T09:03:10.989Z,1520499790.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:11.396Z,1520499791.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T09:03:11.413Z,1520499791.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:11.794Z,1520499791.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T09:03:11.795Z,1520499791.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:12.183Z,1520499792.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T09:03:12.184Z,1520499792.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:12.584Z,1520499792.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T09:03:12.585Z,1520499792.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:12.997Z,1520499792.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T09:03:12.998Z,1520499792.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:13.414Z,1520499793.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T09:03:13.415Z,1520499793.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:13.791Z,1520499793.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T09:03:13.792Z,1520499793.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:13.795Z,1520499793.795 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T09:03:13.795Z,1520499793.795 [Default:CheckIn:C.Wait] Stopped
2018-03-08T09:03:13.795Z,1520499793.795 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T09:03:13.795Z,1520499793.795 [Default:CheckIn:D] Running Loop=1
2018-03-08T09:03:14.193Z,1520499794.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T09:03:14.194Z,1520499794.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:14.197Z,1520499794.197 [Default:CheckIn:D] Stopped
2018-03-08T09:03:14.197Z,1520499794.197 [Default:CheckIn:E] Running Loop=1
2018-03-08T09:03:14.590Z,1520499794.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T09:03:14.591Z,1520499794.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:14.603Z,1520499794.603 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 77.489852 min 
2018-03-08T09:03:14.603Z,1520499794.603 [Default:CheckIn:E] Stopped
2018-03-08T09:03:14.603Z,1520499794.603 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T09:03:14.603Z,1520499794.603 [Default:CheckIn] Stopped
2018-03-08T09:03:14.603Z,1520499794.603 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T09:03:14.604Z,1520499794.604 [Default:CheckIn](INFO): Running loop #8
2018-03-08T09:03:14.604Z,1520499794.604 [Default:CheckIn] Running Loop=8
2018-03-08T09:03:14.604Z,1520499794.604 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T09:03:14.604Z,1520499794.604 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T09:03:14.983Z,1520499794.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T09:03:14.984Z,1520499794.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:15.385Z,1520499795.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T09:03:15.386Z,1520499795.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:18.486Z,1520499798.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-03-08T09:03:18.487Z,1520499798.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:18.634Z,1520499798.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T09:03:18.634Z,1520499798.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:18.978Z,1520499798.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T09:03:18.979Z,1520499798.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:19.384Z,1520499799.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T09:03:19.389Z,1520499799.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:19.762Z,1520499799.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T09:03:19.763Z,1520499799.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:20.162Z,1520499800.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T09:03:20.163Z,1520499800.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:20.566Z,1520499800.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T09:03:20.567Z,1520499800.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:20.960Z,1520499800.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T09:03:20.961Z,1520499800.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:21.372Z,1520499801.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T09:03:21.393Z,1520499801.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:21.769Z,1520499801.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T09:03:21.770Z,1520499801.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:22.170Z,1520499802.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T09:03:22.171Z,1520499802.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:22.561Z,1520499802.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T09:03:22.562Z,1520499802.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:22.963Z,1520499802.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T09:03:22.964Z,1520499802.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:23.362Z,1520499803.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T09:03:23.363Z,1520499803.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:23.762Z,1520499803.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T09:03:23.763Z,1520499803.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:24.165Z,1520499804.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:24.571Z,1520499804.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:24.968Z,1520499804.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:25.362Z,1520499805.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:25.762Z,1520499805.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:26.162Z,1520499806.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:26.559Z,1520499806.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:26.964Z,1520499806.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:27.374Z,1520499807.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:27.772Z,1520499807.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:28.179Z,1520499808.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:28.567Z,1520499808.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:28.964Z,1520499808.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:29.364Z,1520499809.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:29.763Z,1520499809.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:30.172Z,1520499810.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:30.598Z,1520499810.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:30.979Z,1520499810.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:31.363Z,1520499811.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:31.770Z,1520499811.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:32.163Z,1520499812.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:32.560Z,1520499812.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:32.962Z,1520499812.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:33.374Z,1520499813.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:33.772Z,1520499813.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:34.169Z,1520499814.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:34.570Z,1520499814.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:34.963Z,1520499814.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:35.364Z,1520499815.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:35.762Z,1520499815.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:36.172Z,1520499816.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:36.571Z,1520499816.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:36.979Z,1520499816.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:37.364Z,1520499817.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:37.763Z,1520499817.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:38.159Z,1520499818.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:38.561Z,1520499818.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:38.963Z,1520499818.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:39.372Z,1520499819.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:39.772Z,1520499819.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:40.172Z,1520499820.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:40.563Z,1520499820.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:40.967Z,1520499820.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:41.366Z,1520499821.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:41.761Z,1520499821.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:42.179Z,1520499822.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:42.572Z,1520499822.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:42.971Z,1520499822.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:43.364Z,1520499823.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:43.763Z,1520499823.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:44.162Z,1520499824.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:44.566Z,1520499824.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:44.963Z,1520499824.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:45.380Z,1520499825.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:45.771Z,1520499825.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:46.173Z,1520499826.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:46.558Z,1520499826.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:46.970Z,1520499826.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:47.365Z,1520499827.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:47.769Z,1520499827.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:48.173Z,1520499828.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:48.577Z,1520499828.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:48.977Z,1520499828.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:49.366Z,1520499829.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:49.764Z,1520499829.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:50.165Z,1520499830.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:50.566Z,1520499830.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:50.965Z,1520499830.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:51.369Z,1520499831.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:51.769Z,1520499831.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:52.178Z,1520499832.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:52.565Z,1520499832.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:52.967Z,1520499832.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:53.365Z,1520499833.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:53.764Z,1520499833.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:54.173Z,1520499834.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:54.577Z,1520499834.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:54.971Z,1520499834.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:55.369Z,1520499835.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:55.765Z,1520499835.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:56.166Z,1520499836.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:56.572Z,1520499836.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:56.960Z,1520499836.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:57.379Z,1520499837.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:57.787Z,1520499837.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:58.167Z,1520499838.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:58.569Z,1520499838.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:58.978Z,1520499838.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:59.372Z,1520499839.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:03:59.774Z,1520499839.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:00.180Z,1520499840.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:00.575Z,1520499840.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:00.984Z,1520499840.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:01.359Z,1520499841.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:01.751Z,1520499841.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:02.163Z,1520499842.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:02.556Z,1520499842.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:02.955Z,1520499842.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:03.390Z,1520499843.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:03.767Z,1520499843.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:04.161Z,1520499844.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:04.562Z,1520499844.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:04.958Z,1520499844.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:05.361Z,1520499845.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:05.759Z,1520499845.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:06.165Z,1520499846.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:06.561Z,1520499846.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:06.961Z,1520499846.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:07.359Z,1520499847.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:07.756Z,1520499847.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:08.165Z,1520499848.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:08.563Z,1520499848.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:08.962Z,1520499848.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:09.366Z,1520499849.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:09.767Z,1520499849.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:10.163Z,1520499850.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:10.566Z,1520499850.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:10.961Z,1520499850.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:11.371Z,1520499851.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:11.774Z,1520499851.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:12.181Z,1520499852.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:12.573Z,1520499852.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:12.984Z,1520499852.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:13.354Z,1520499853.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:13.759Z,1520499853.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:14.161Z,1520499854.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:14.560Z,1520499854.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:14.963Z,1520499854.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:15.387Z,1520499855.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:15.788Z,1520499855.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:18.887Z,1520499858.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:19.015Z,1520499859.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:19.360Z,1520499859.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:19.760Z,1520499859.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:20.165Z,1520499860.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:20.566Z,1520499860.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:20.959Z,1520499860.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:21.390Z,1520499861.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:21.789Z,1520499861.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:22.165Z,1520499862.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:22.562Z,1520499862.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:22.963Z,1520499862.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:23.363Z,1520499863.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:23.758Z,1520499863.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:24.165Z,1520499864.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:24.567Z,1520499864.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:24.965Z,1520499864.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:25.360Z,1520499865.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:25.763Z,1520499865.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:26.167Z,1520499866.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:26.564Z,1520499866.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:26.963Z,1520499866.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:27.369Z,1520499867.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:27.768Z,1520499867.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:28.168Z,1520499868.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:28.565Z,1520499868.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:28.962Z,1520499868.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:29.364Z,1520499869.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:29.760Z,1520499869.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:30.168Z,1520499870.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:30.569Z,1520499870.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:30.968Z,1520499870.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:31.363Z,1520499871.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:31.763Z,1520499871.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:32.170Z,1520499872.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:32.565Z,1520499872.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:32.969Z,1520499872.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:33.374Z,1520499873.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:33.768Z,1520499873.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:34.169Z,1520499874.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:34.561Z,1520499874.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:34.963Z,1520499874.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:35.366Z,1520499875.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:35.763Z,1520499875.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:36.174Z,1520499876.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:36.569Z,1520499876.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:36.968Z,1520499876.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:37.361Z,1520499877.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:37.765Z,1520499877.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:38.166Z,1520499878.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:38.565Z,1520499878.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:38.961Z,1520499878.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:39.369Z,1520499879.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:39.769Z,1520499879.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:40.174Z,1520499880.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:40.566Z,1520499880.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:40.970Z,1520499880.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:41.365Z,1520499881.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:41.764Z,1520499881.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:42.173Z,1520499882.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:42.572Z,1520499882.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:42.973Z,1520499882.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:43.363Z,1520499883.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:43.761Z,1520499883.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:44.169Z,1520499884.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:44.565Z,1520499884.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:44.967Z,1520499884.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:45.371Z,1520499885.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:45.774Z,1520499885.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:46.179Z,1520499886.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:46.565Z,1520499886.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:46.966Z,1520499886.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:47.369Z,1520499887.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:47.765Z,1520499887.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:48.171Z,1520499888.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:48.573Z,1520499888.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:48.972Z,1520499888.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:49.367Z,1520499889.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:49.751Z,1520499889.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:50.151Z,1520499890.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:50.555Z,1520499890.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:50.954Z,1520499890.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:51.376Z,1520499891.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:51.777Z,1520499891.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:52.187Z,1520499892.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:52.553Z,1520499892.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:52.955Z,1520499892.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:53.358Z,1520499893.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:53.758Z,1520499893.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:54.177Z,1520499894.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:54.588Z,1520499894.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:54.957Z,1520499894.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:55.359Z,1520499895.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:55.759Z,1520499895.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:56.157Z,1520499896.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:56.561Z,1520499896.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:56.959Z,1520499896.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:57.357Z,1520499897.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:57.789Z,1520499897.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:58.200Z,1520499898.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:58.558Z,1520499898.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:58.958Z,1520499898.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:59.360Z,1520499899.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:04:59.770Z,1520499899.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:00.167Z,1520499900.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:00.593Z,1520499900.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:00.966Z,1520499900.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:01.361Z,1520499901.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:01.758Z,1520499901.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:02.165Z,1520499902.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:02.569Z,1520499902.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:02.971Z,1520499902.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:03.375Z,1520499903.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:03.774Z,1520499903.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:04.174Z,1520499904.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:04.563Z,1520499904.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:04.971Z,1520499904.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:05.364Z,1520499905.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:05.756Z,1520499905.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:06.168Z,1520499906.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:06.568Z,1520499906.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:06.973Z,1520499906.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:07.363Z,1520499907.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:07.763Z,1520499907.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:08.160Z,1520499908.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:08.566Z,1520499908.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:08.963Z,1520499908.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:09.372Z,1520499909.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:09.778Z,1520499909.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:10.173Z,1520499910.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:10.560Z,1520499910.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:10.963Z,1520499910.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:11.366Z,1520499911.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:11.765Z,1520499911.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:12.174Z,1520499912.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:12.576Z,1520499912.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:12.975Z,1520499912.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:13.363Z,1520499913.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:13.761Z,1520499913.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:14.166Z,1520499914.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:14.571Z,1520499914.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:14.966Z,1520499914.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:15.378Z,1520499915.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:15.777Z,1520499915.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:16.174Z,1520499916.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:19.475Z,1520499919.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:19.584Z,1520499919.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:19.969Z,1520499919.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:20.365Z,1520499920.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:20.789Z,1520499920.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:21.174Z,1520499921.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:21.554Z,1520499921.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:21.957Z,1520499921.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:22.365Z,1520499922.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:22.764Z,1520499922.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:23.165Z,1520499923.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:23.562Z,1520499923.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:23.965Z,1520499923.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:24.361Z,1520499924.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:24.761Z,1520499924.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:25.161Z,1520499925.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:25.570Z,1520499925.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:25.968Z,1520499925.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:26.362Z,1520499926.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:26.757Z,1520499926.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:27.150Z,1520499927.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:27.571Z,1520499927.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:27.964Z,1520499927.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:28.374Z,1520499928.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:28.770Z,1520499928.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:29.169Z,1520499929.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:29.571Z,1520499929.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:29.937Z,1520499929.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:30.343Z,1520499930.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:30.739Z,1520499930.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:31.167Z,1520499931.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:31.578Z,1520499931.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:31.973Z,1520499931.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:32.344Z,1520499932.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:32.751Z,1520499932.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:33.144Z,1520499933.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:33.547Z,1520499933.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:33.955Z,1520499933.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:34.375Z,1520499934.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:34.769Z,1520499934.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:35.148Z,1520499935.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:35.550Z,1520499935.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:35.953Z,1520499935.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:36.348Z,1520499936.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:36.748Z,1520499936.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:37.174Z,1520499937.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:37.571Z,1520499937.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:37.978Z,1520499937.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:38.347Z,1520499938.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:38.754Z,1520499938.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:39.155Z,1520499939.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:39.550Z,1520499939.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:39.955Z,1520499939.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:40.362Z,1520499940.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:40.759Z,1520499940.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:41.184Z,1520499941.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:41.555Z,1520499941.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:41.957Z,1520499941.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:42.355Z,1520499942.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:42.767Z,1520499942.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:43.163Z,1520499943.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:43.557Z,1520499943.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:43.960Z,1520499943.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:44.363Z,1520499944.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:44.744Z,1520499944.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:45.149Z,1520499945.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:45.558Z,1520499945.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:45.953Z,1520499945.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:46.363Z,1520499946.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:46.764Z,1520499946.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:47.158Z,1520499947.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:47.562Z,1520499947.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:47.950Z,1520499947.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:48.358Z,1520499948.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:48.755Z,1520499948.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:49.186Z,1520499949.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:49.553Z,1520499949.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:49.963Z,1520499949.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:50.355Z,1520499950.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:50.763Z,1520499950.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:51.154Z,1520499951.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:51.558Z,1520499951.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:51.953Z,1520499951.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:52.356Z,1520499952.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:52.762Z,1520499952.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:53.164Z,1520499953.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:53.556Z,1520499953.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:53.955Z,1520499953.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:54.349Z,1520499954.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:54.756Z,1520499954.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:55.166Z,1520499955.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:55.586Z,1520499955.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:55.968Z,1520499955.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:56.357Z,1520499956.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:56.760Z,1520499956.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:57.151Z,1520499957.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:57.550Z,1520499957.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:57.954Z,1520499957.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:58.367Z,1520499958.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:58.786Z,1520499958.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:59.158Z,1520499959.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:59.558Z,1520499959.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:05:59.956Z,1520499959.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:00.367Z,1520499960.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:00.755Z,1520499960.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:01.166Z,1520499961.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:01.562Z,1520499961.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:01.985Z,1520499961.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:02.344Z,1520499962.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:02.753Z,1520499962.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:03.157Z,1520499963.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:03.550Z,1520499963.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:03.943Z,1520499963.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:04.368Z,1520499964.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:04.769Z,1520499964.769 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:04.769Z,1520499964.769 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28
2018-03-08T09:06:04.769Z,1520499964.769 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T09:06:04.771Z,1520499964.771 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:04.771Z,1520499964.771 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28
2018-03-08T09:06:04.771Z,1520499964.771 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T09:06:04.772Z,1520499964.772 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:04.773Z,1520499964.773 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 28
2018-03-08T09:06:04.773Z,1520499964.773 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T09:06:04.784Z,1520499964.784 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T09:06:04.784Z,1520499964.784 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T09:06:04.808Z,1520499964.808 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T09:06:05.207Z,1520499965.207 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T09:06:05.207Z,1520499965.207 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28
2018-03-08T09:06:05.207Z,1520499965.207 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T09:06:05.207Z,1520499965.207 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28
2018-03-08T09:06:05.208Z,1520499965.208 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T09:06:05.208Z,1520499965.208 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 28
2018-03-08T09:06:05.566Z,1520499965.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T09:06:05.566Z,1520499965.566 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:06:05.567Z,1520499965.567 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:06:05.567Z,1520499965.567 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T09:06:05.568Z,1520499965.568 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:06:05.568Z,1520499965.568 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:06:05.568Z,1520499965.568 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T09:06:05.573Z,1520499965.573 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:06:05.573Z,1520499965.573 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:06:05.966Z,1520499965.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T09:06:05.966Z,1520499965.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:06.365Z,1520499966.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T09:06:06.366Z,1520499966.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:06.782Z,1520499966.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T09:06:06.783Z,1520499966.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:07.212Z,1520499967.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T09:06:07.213Z,1520499967.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:07.561Z,1520499967.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T09:06:07.562Z,1520499967.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:07.974Z,1520499967.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T09:06:07.975Z,1520499967.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:08.358Z,1520499968.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T09:06:08.359Z,1520499968.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:08.742Z,1520499968.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T09:06:08.743Z,1520499968.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:09.150Z,1520499969.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T09:06:09.151Z,1520499969.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:09.552Z,1520499969.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T09:06:09.553Z,1520499969.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:09.950Z,1520499969.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T09:06:09.951Z,1520499969.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:10.377Z,1520499970.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T09:06:10.378Z,1520499970.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:10.760Z,1520499970.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T09:06:10.780Z,1520499970.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:11.153Z,1520499971.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T09:06:11.154Z,1520499971.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:11.549Z,1520499971.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T09:06:11.550Z,1520499971.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:11.943Z,1520499971.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T09:06:11.944Z,1520499971.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:12.357Z,1520499972.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T09:06:12.358Z,1520499972.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:12.754Z,1520499972.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T09:06:12.755Z,1520499972.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:13.181Z,1520499973.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T09:06:13.182Z,1520499973.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:13.555Z,1520499973.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T09:06:13.555Z,1520499973.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:13.958Z,1520499973.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T09:06:13.959Z,1520499973.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:14.354Z,1520499974.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T09:06:14.355Z,1520499974.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:14.745Z,1520499974.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T09:06:14.746Z,1520499974.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:15.147Z,1520499975.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T09:06:15.148Z,1520499975.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:15.556Z,1520499975.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T09:06:15.557Z,1520499975.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:15.945Z,1520499975.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T09:06:15.946Z,1520499975.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:16.350Z,1520499976.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T09:06:16.351Z,1520499976.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:19.452Z,1520499979.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-03-08T09:06:19.453Z,1520499979.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:19.591Z,1520499979.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T09:06:19.592Z,1520499979.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:19.982Z,1520499979.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T09:06:19.983Z,1520499979.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:20.360Z,1520499980.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T09:06:20.361Z,1520499980.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:20.754Z,1520499980.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T09:06:20.755Z,1520499980.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:21.185Z,1520499981.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T09:06:21.186Z,1520499981.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:21.568Z,1520499981.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T09:06:21.569Z,1520499981.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:21.967Z,1520499981.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T09:06:21.968Z,1520499981.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:22.366Z,1520499982.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T09:06:22.367Z,1520499982.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:22.776Z,1520499982.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T09:06:22.793Z,1520499982.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:23.153Z,1520499983.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T09:06:23.154Z,1520499983.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:23.564Z,1520499983.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T09:06:23.565Z,1520499983.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:23.960Z,1520499983.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T09:06:23.961Z,1520499983.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:24.387Z,1520499984.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T09:06:24.388Z,1520499984.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:24.767Z,1520499984.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T09:06:24.769Z,1520499984.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:25.168Z,1520499985.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:25.556Z,1520499985.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:25.989Z,1520499985.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:26.365Z,1520499986.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:26.764Z,1520499986.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:27.167Z,1520499987.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:27.590Z,1520499987.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:27.965Z,1520499987.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:28.363Z,1520499988.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:28.762Z,1520499988.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:29.180Z,1520499989.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:29.552Z,1520499989.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:29.959Z,1520499989.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:30.383Z,1520499990.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:30.783Z,1520499990.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:31.183Z,1520499991.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:31.553Z,1520499991.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:31.960Z,1520499991.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:32.387Z,1520499992.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:32.754Z,1520499992.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:33.182Z,1520499993.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:33.575Z,1520499993.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:33.983Z,1520499993.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:34.353Z,1520499994.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:34.760Z,1520499994.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:35.161Z,1520499995.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:35.554Z,1520499995.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:35.962Z,1520499995.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:36.365Z,1520499996.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:36.786Z,1520499996.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:37.186Z,1520499997.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:37.554Z,1520499997.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:37.962Z,1520499997.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:38.361Z,1520499998.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:38.767Z,1520499998.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:39.183Z,1520499999.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:39.565Z,1520499999.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:39.963Z,1520499999.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:40.382Z,1520500000.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:40.785Z,1520500000.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:41.152Z,1520500001.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:41.560Z,1520500001.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:41.984Z,1520500001.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:42.365Z,1520500002.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:42.785Z,1520500002.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:43.167Z,1520500003.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:43.575Z,1520500003.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:43.967Z,1520500003.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:44.363Z,1520500004.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:44.766Z,1520500004.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:45.190Z,1520500005.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:45.572Z,1520500005.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:45.971Z,1520500005.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:46.361Z,1520500006.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:46.787Z,1520500006.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:47.156Z,1520500007.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:47.565Z,1520500007.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:47.963Z,1520500007.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:48.390Z,1520500008.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:48.771Z,1520500008.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:49.171Z,1520500009.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:49.567Z,1520500009.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:49.986Z,1520500009.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:50.372Z,1520500010.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:50.764Z,1520500010.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:51.180Z,1520500011.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:51.590Z,1520500011.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:51.971Z,1520500011.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:52.367Z,1520500012.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:52.767Z,1520500012.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:53.167Z,1520500013.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:53.571Z,1520500013.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:53.967Z,1520500013.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:54.383Z,1520500014.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:54.794Z,1520500014.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:55.194Z,1520500015.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:55.579Z,1520500015.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:56.030Z,1520500016.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:56.386Z,1520500016.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:56.769Z,1520500016.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:57.185Z,1520500017.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:57.566Z,1520500017.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:57.986Z,1520500017.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:58.357Z,1520500018.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:58.760Z,1520500018.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:59.161Z,1520500019.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:59.586Z,1520500019.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:06:59.955Z,1520500019.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:00.365Z,1520500020.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:00.770Z,1520500020.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:01.192Z,1520500021.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:01.554Z,1520500021.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:01.963Z,1520500021.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:02.362Z,1520500022.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:02.779Z,1520500022.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:03.175Z,1520500023.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:03.571Z,1520500023.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:03.971Z,1520500023.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:04.378Z,1520500024.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:04.760Z,1520500024.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:05.163Z,1520500025.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:05.563Z,1520500025.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:05.963Z,1520500025.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:06.373Z,1520500026.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:06.782Z,1520500026.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:07.179Z,1520500027.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:07.582Z,1520500027.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:07.956Z,1520500027.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:08.360Z,1520500028.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:08.758Z,1520500028.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:09.231Z,1520500029.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:09.577Z,1520500029.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:09.979Z,1520500029.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:10.366Z,1520500030.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:10.763Z,1520500030.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:11.185Z,1520500031.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:11.563Z,1520500031.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:11.960Z,1520500031.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:12.386Z,1520500032.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:12.770Z,1520500032.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:13.164Z,1520500033.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:13.562Z,1520500033.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:13.986Z,1520500033.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:14.351Z,1520500034.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:14.762Z,1520500034.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:15.231Z,1520500035.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:15.607Z,1520500035.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:15.968Z,1520500035.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:16.366Z,1520500036.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:19.877Z,1520500039.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:19.996Z,1520500039.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:20.405Z,1520500040.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:20.804Z,1520500040.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:21.203Z,1520500041.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:21.582Z,1520500041.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:22.014Z,1520500042.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:22.410Z,1520500042.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:22.787Z,1520500042.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:23.189Z,1520500043.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:23.588Z,1520500043.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:23.987Z,1520500043.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:24.389Z,1520500044.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:24.779Z,1520500044.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:25.187Z,1520500045.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:25.586Z,1520500045.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:25.986Z,1520500045.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:26.389Z,1520500046.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:26.789Z,1520500046.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:27.214Z,1520500047.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:27.586Z,1520500047.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:27.982Z,1520500047.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:28.388Z,1520500048.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:28.783Z,1520500048.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:29.194Z,1520500049.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:29.585Z,1520500049.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:29.988Z,1520500049.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:30.385Z,1520500050.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:30.787Z,1520500050.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:31.186Z,1520500051.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:31.606Z,1520500051.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:32.008Z,1520500052.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:32.389Z,1520500052.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:32.813Z,1520500052.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:33.189Z,1520500053.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:33.584Z,1520500053.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:33.989Z,1520500053.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:34.380Z,1520500054.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:34.811Z,1520500054.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:35.217Z,1520500055.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:35.591Z,1520500055.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:35.989Z,1520500055.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:36.414Z,1520500056.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:36.798Z,1520500056.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:37.187Z,1520500057.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:37.578Z,1520500057.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:37.982Z,1520500057.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:38.395Z,1520500058.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:38.792Z,1520500058.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:39.197Z,1520500059.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:39.586Z,1520500059.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:39.987Z,1520500059.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:40.387Z,1520500060.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:40.783Z,1520500060.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:41.192Z,1520500061.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:41.595Z,1520500061.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:41.998Z,1520500061.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:42.385Z,1520500062.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:42.787Z,1520500062.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:43.184Z,1520500063.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:43.582Z,1520500063.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:43.978Z,1520500063.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:44.390Z,1520500064.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:44.796Z,1520500064.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:45.201Z,1520500065.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:45.650Z,1520500065.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:45.980Z,1520500065.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:46.388Z,1520500066.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:46.783Z,1520500066.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:47.188Z,1520500067.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:47.599Z,1520500067.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:48.001Z,1520500068.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:48.386Z,1520500068.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:48.786Z,1520500068.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:49.206Z,1520500069.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:49.603Z,1520500069.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:49.982Z,1520500069.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:50.397Z,1520500070.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:50.798Z,1520500070.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:51.197Z,1520500071.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:51.585Z,1520500071.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:51.988Z,1520500071.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:52.402Z,1520500072.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:52.806Z,1520500072.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:53.194Z,1520500073.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:53.599Z,1520500073.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:53.994Z,1520500073.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:54.389Z,1520500074.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:54.790Z,1520500074.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:55.185Z,1520500075.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:55.588Z,1520500075.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:55.988Z,1520500075.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:56.399Z,1520500076.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:56.795Z,1520500076.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:57.224Z,1520500077.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:57.592Z,1520500077.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:57.985Z,1520500077.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:58.391Z,1520500078.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:58.786Z,1520500078.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:59.202Z,1520500079.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:07:59.593Z,1520500079.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:00.002Z,1520500080.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:00.387Z,1520500080.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:00.788Z,1520500080.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:01.186Z,1520500081.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:01.579Z,1520500081.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:01.988Z,1520500081.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:02.393Z,1520500082.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:02.795Z,1520500082.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:03.195Z,1520500083.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:03.586Z,1520500083.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:03.991Z,1520500083.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:04.386Z,1520500084.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:04.794Z,1520500084.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:05.198Z,1520500085.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:05.600Z,1520500085.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:05.993Z,1520500085.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:06.386Z,1520500086.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:06.788Z,1520500086.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:07.193Z,1520500087.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:07.583Z,1520500087.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:07.985Z,1520500087.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:08.391Z,1520500088.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:08.801Z,1520500088.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:09.194Z,1520500089.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:09.585Z,1520500089.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:09.995Z,1520500089.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:10.406Z,1520500090.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:10.790Z,1520500090.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:11.194Z,1520500091.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:11.593Z,1520500091.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:11.997Z,1520500091.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:12.387Z,1520500092.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:12.783Z,1520500092.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:13.189Z,1520500093.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:13.587Z,1520500093.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:13.987Z,1520500093.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:14.394Z,1520500094.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:14.803Z,1520500094.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:14.807Z,1520500094.807 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T09:03:14.6Z
2018-03-08T09:08:14.807Z,1520500094.807 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T09:08:14.807Z,1520500094.807 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T09:08:15.196Z,1520500095.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:15.686Z,1520500095.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:15.985Z,1520500095.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:19.137Z,1520500099.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:19.254Z,1520500099.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:19.577Z,1520500099.577 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0032.lzma
2018-03-08T09:08:19.646Z,1520500099.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:20.039Z,1520500100.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:20.371Z,1520500100.371 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0032.lzma.bak
2018-03-08T09:08:20.371Z,1520500100.371 [DataOverHttps](INFO): SBD MOMSN=7984370
2018-03-08T09:08:20.444Z,1520500100.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:23.550Z,1520500103.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:23.655Z,1520500103.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:24.078Z,1520500104.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:27.190Z,1520500107.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:27.330Z,1520500107.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:27.674Z,1520500107.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:28.057Z,1520500108.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:28.455Z,1520500108.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:28.861Z,1520500108.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:29.288Z,1520500109.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:32.408Z,1520500112.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:32.548Z,1520500112.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:32.857Z,1520500112.857 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180308T074127/Express0033.lzma
2018-03-08T09:08:32.909Z,1520500112.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:33.304Z,1520500113.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:33.655Z,1520500113.655 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0033.lzma.bak
2018-03-08T09:08:33.655Z,1520500113.655 [DataOverHttps](INFO): SBD MOMSN=7984372
2018-03-08T09:08:33.712Z,1520500113.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:34.288Z,1520500114.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:34.291Z,1520500114.291 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T09:08:34.291Z,1520500114.291 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T09:08:34.291Z,1520500114.291 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T09:08:34.507Z,1520500114.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:37.645Z,1520500117.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:37.784Z,1520500117.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:38.119Z,1520500118.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:38.517Z,1520500118.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:38.911Z,1520500118.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:39.321Z,1520500119.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:39.723Z,1520500119.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:40.126Z,1520500120.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:40.522Z,1520500120.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:40.918Z,1520500120.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:41.323Z,1520500121.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:41.718Z,1520500121.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:42.124Z,1520500122.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:42.525Z,1520500122.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:42.921Z,1520500122.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:43.319Z,1520500123.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:43.709Z,1520500123.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:44.126Z,1520500124.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:44.519Z,1520500124.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:44.913Z,1520500124.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:45.323Z,1520500125.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:45.723Z,1520500125.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:46.128Z,1520500126.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:46.517Z,1520500126.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:46.918Z,1520500126.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:47.317Z,1520500127.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:47.726Z,1520500127.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:48.135Z,1520500128.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:48.527Z,1520500128.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:48.924Z,1520500128.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:49.315Z,1520500129.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:49.714Z,1520500129.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:50.117Z,1520500130.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:50.522Z,1520500130.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:50.917Z,1520500130.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:51.327Z,1520500131.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:51.728Z,1520500131.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:52.123Z,1520500132.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:52.519Z,1520500132.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:52.927Z,1520500132.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:53.326Z,1520500133.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:53.716Z,1520500133.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:54.130Z,1520500134.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:54.526Z,1520500134.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:54.924Z,1520500134.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:55.318Z,1520500135.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:55.718Z,1520500135.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:56.122Z,1520500136.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:56.540Z,1520500136.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:56.931Z,1520500136.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:57.331Z,1520500137.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:57.740Z,1520500137.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:58.132Z,1520500138.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:58.511Z,1520500138.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:58.911Z,1520500138.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:59.410Z,1520500139.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:08:59.718Z,1520500139.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:00.142Z,1520500140.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:00.537Z,1520500140.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:00.924Z,1520500140.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:01.315Z,1520500141.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:01.711Z,1520500141.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:02.116Z,1520500142.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:02.517Z,1520500142.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:02.915Z,1520500142.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:03.328Z,1520500143.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:03.725Z,1520500143.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:04.120Z,1520500144.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:04.519Z,1520500144.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:04.927Z,1520500144.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:05.321Z,1520500145.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:05.716Z,1520500145.716 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:05.716Z,1520500145.716 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29
2018-03-08T09:09:05.716Z,1520500145.716 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T09:09:05.718Z,1520500145.718 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:05.718Z,1520500145.718 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29
2018-03-08T09:09:05.718Z,1520500145.718 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T09:09:05.719Z,1520500145.719 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:05.720Z,1520500145.720 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 29
2018-03-08T09:09:05.720Z,1520500145.720 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T09:09:05.731Z,1520500145.731 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T09:09:05.732Z,1520500145.732 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T09:09:05.732Z,1520500145.732 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T09:09:06.074Z,1520500146.074 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T09:09:06.074Z,1520500146.074 [NAL9602] Data Fault, FailCount= 4
2018-03-08T09:09:06.074Z,1520500146.074 [NAL9602](ERROR): Data Fault
2018-03-08T09:09:06.153Z,1520500146.153 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T09:09:06.153Z,1520500146.153 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29
2018-03-08T09:09:06.153Z,1520500146.153 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T09:09:06.154Z,1520500146.154 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29
2018-03-08T09:09:06.154Z,1520500146.154 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T09:09:06.154Z,1520500146.154 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 29
2018-03-08T09:09:06.155Z,1520500146.155 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T09:09:06.474Z,1520500146.474 [NAL9602](INFO): Powering down
2018-03-08T09:09:06.525Z,1520500146.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T09:09:06.525Z,1520500146.525 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:09:06.526Z,1520500146.526 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:09:06.526Z,1520500146.526 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T09:09:06.527Z,1520500146.527 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:09:06.527Z,1520500146.527 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:09:06.527Z,1520500146.527 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T09:09:06.528Z,1520500146.528 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:09:06.528Z,1520500146.528 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:09:06.925Z,1520500146.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T09:09:06.926Z,1520500146.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:07.326Z,1520500147.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T09:09:07.327Z,1520500147.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:07.341Z,1520500147.341 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T09:09:07.341Z,1520500147.341 [NAL9602] No Fault, FailCount= 4
2018-03-08T09:09:07.723Z,1520500147.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T09:09:07.724Z,1520500147.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:08.133Z,1520500148.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T09:09:08.134Z,1520500148.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:08.507Z,1520500148.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T09:09:08.529Z,1520500148.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:08.935Z,1520500148.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T09:09:08.936Z,1520500148.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:09.344Z,1520500149.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T09:09:09.346Z,1520500149.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:09.743Z,1520500149.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T09:09:09.744Z,1520500149.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:10.108Z,1520500150.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T09:09:10.109Z,1520500150.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:10.562Z,1520500150.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T09:09:10.563Z,1520500150.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:10.922Z,1520500150.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T09:09:10.923Z,1520500150.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:11.351Z,1520500151.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T09:09:11.352Z,1520500151.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:11.718Z,1520500151.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T09:09:11.719Z,1520500151.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:12.112Z,1520500152.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T09:09:12.113Z,1520500152.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:12.515Z,1520500152.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T09:09:12.516Z,1520500152.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:12.916Z,1520500152.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T09:09:12.917Z,1520500152.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:13.326Z,1520500153.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T09:09:13.327Z,1520500153.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:13.713Z,1520500153.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T09:09:13.714Z,1520500153.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:14.118Z,1520500154.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T09:09:14.119Z,1520500154.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:14.516Z,1520500154.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T09:09:14.517Z,1520500154.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:14.918Z,1520500154.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T09:09:14.919Z,1520500154.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:15.322Z,1520500155.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T09:09:15.323Z,1520500155.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:15.717Z,1520500155.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T09:09:15.718Z,1520500155.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:16.111Z,1520500156.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T09:09:16.111Z,1520500156.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:16.518Z,1520500156.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T09:09:16.519Z,1520500156.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:16.912Z,1520500156.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T09:09:16.913Z,1520500156.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:17.317Z,1520500157.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T09:09:17.318Z,1520500157.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:17.718Z,1520500157.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T09:09:17.719Z,1520500157.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:18.113Z,1520500158.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T09:09:18.114Z,1520500158.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:18.511Z,1520500158.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T09:09:18.512Z,1520500158.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:18.918Z,1520500158.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T09:09:18.919Z,1520500158.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:19.317Z,1520500159.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T09:09:19.318Z,1520500159.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:19.718Z,1520500159.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T09:09:19.719Z,1520500159.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:20.118Z,1520500160.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T09:09:20.119Z,1520500160.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:20.518Z,1520500160.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T09:09:20.519Z,1520500160.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:20.917Z,1520500160.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T09:09:20.918Z,1520500160.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:21.318Z,1520500161.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T09:09:21.319Z,1520500161.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:21.721Z,1520500161.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T09:09:21.722Z,1520500161.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:22.119Z,1520500162.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T09:09:22.119Z,1520500162.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:22.518Z,1520500162.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T09:09:22.519Z,1520500162.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:22.912Z,1520500162.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T09:09:22.913Z,1520500162.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:23.322Z,1520500163.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T09:09:23.323Z,1520500163.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:23.718Z,1520500163.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T09:09:23.719Z,1520500163.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:24.116Z,1520500164.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T09:09:24.117Z,1520500164.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:24.522Z,1520500164.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T09:09:24.523Z,1520500164.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:24.922Z,1520500164.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T09:09:24.923Z,1520500164.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:25.317Z,1520500165.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T09:09:25.318Z,1520500165.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:25.723Z,1520500165.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:26.122Z,1520500166.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:26.517Z,1520500166.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:26.922Z,1520500166.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:27.322Z,1520500167.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:27.709Z,1520500167.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:28.116Z,1520500168.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:28.522Z,1520500168.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:28.909Z,1520500168.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:29.322Z,1520500169.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:29.717Z,1520500169.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:30.113Z,1520500170.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:30.519Z,1520500170.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:30.915Z,1520500170.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:31.317Z,1520500171.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:31.723Z,1520500171.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:32.122Z,1520500172.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:32.517Z,1520500172.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:32.916Z,1520500172.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:33.315Z,1520500173.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:33.721Z,1520500173.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:34.122Z,1520500174.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:34.522Z,1520500174.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:34.918Z,1520500174.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:38.028Z,1520500178.028 [NAL9602](INFO): Powering up NAL9602
2018-03-08T09:09:38.070Z,1520500178.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:38.203Z,1520500178.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:38.556Z,1520500178.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:38.955Z,1520500178.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:39.358Z,1520500179.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:39.741Z,1520500179.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:40.135Z,1520500180.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:40.542Z,1520500180.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:40.941Z,1520500180.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:41.342Z,1520500181.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:41.740Z,1520500181.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:42.158Z,1520500182.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:42.541Z,1520500182.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:42.943Z,1520500182.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:43.370Z,1520500183.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:43.740Z,1520500183.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:44.166Z,1520500184.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:44.542Z,1520500184.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:44.935Z,1520500184.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:45.342Z,1520500185.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:45.743Z,1520500185.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:46.135Z,1520500186.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:46.540Z,1520500186.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:46.942Z,1520500186.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:47.334Z,1520500187.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:47.742Z,1520500187.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:48.142Z,1520500188.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:48.568Z,1520500188.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:48.907Z,1520500188.907 [NAL9602](INFO): NAL9602 initialized
2018-03-08T09:09:48.939Z,1520500188.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:49.343Z,1520500189.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:49.741Z,1520500189.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:50.152Z,1520500190.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:50.602Z,1520500190.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:50.954Z,1520500190.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:51.355Z,1520500191.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:51.751Z,1520500191.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:52.144Z,1520500192.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:52.573Z,1520500192.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:53.017Z,1520500193.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:53.352Z,1520500193.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:53.746Z,1520500193.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:54.143Z,1520500194.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:54.549Z,1520500194.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:54.956Z,1520500194.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:55.362Z,1520500195.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:55.753Z,1520500195.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:56.143Z,1520500196.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:56.543Z,1520500196.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:56.950Z,1520500196.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:57.348Z,1520500197.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:57.743Z,1520500197.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:58.150Z,1520500198.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:58.556Z,1520500198.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:58.962Z,1520500198.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:59.347Z,1520500199.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:09:59.747Z,1520500199.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:00.154Z,1520500200.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:00.553Z,1520500200.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:00.953Z,1520500200.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:01.362Z,1520500201.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:01.763Z,1520500201.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:02.150Z,1520500202.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:02.546Z,1520500202.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:02.937Z,1520500202.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:03.351Z,1520500203.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:03.755Z,1520500203.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:04.165Z,1520500204.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:04.562Z,1520500204.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:04.966Z,1520500204.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:05.355Z,1520500205.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:05.754Z,1520500205.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:06.154Z,1520500206.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:06.559Z,1520500206.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:06.960Z,1520500206.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:07.370Z,1520500207.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:07.762Z,1520500207.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:08.139Z,1520500208.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:08.542Z,1520500208.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:08.955Z,1520500208.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:09.340Z,1520500209.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:09.742Z,1520500209.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:10.164Z,1520500210.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:10.559Z,1520500210.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:10.966Z,1520500210.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:11.362Z,1520500211.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:11.743Z,1520500211.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:12.144Z,1520500212.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:12.539Z,1520500212.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:12.963Z,1520500212.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:13.364Z,1520500213.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:13.751Z,1520500213.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:14.150Z,1520500214.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:14.545Z,1520500214.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:14.938Z,1520500214.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:15.345Z,1520500215.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:15.743Z,1520500215.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:16.171Z,1520500216.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:16.550Z,1520500216.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:16.971Z,1520500216.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:17.344Z,1520500217.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:17.743Z,1520500217.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:18.150Z,1520500218.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:18.550Z,1520500218.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:18.973Z,1520500218.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:19.353Z,1520500219.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:19.749Z,1520500219.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:20.146Z,1520500220.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:20.548Z,1520500220.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:20.955Z,1520500220.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:21.349Z,1520500221.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:21.747Z,1520500221.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:22.168Z,1520500222.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:22.551Z,1520500222.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:22.953Z,1520500222.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:23.349Z,1520500223.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:23.748Z,1520500223.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:24.149Z,1520500224.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:24.555Z,1520500224.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:24.953Z,1520500224.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:25.359Z,1520500225.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:25.753Z,1520500225.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:26.148Z,1520500226.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:26.546Z,1520500226.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:26.943Z,1520500226.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:27.361Z,1520500227.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:27.777Z,1520500227.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:28.167Z,1520500228.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:28.557Z,1520500228.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:28.973Z,1520500228.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:29.350Z,1520500229.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:29.763Z,1520500229.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:30.175Z,1520500230.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:30.543Z,1520500230.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:30.949Z,1520500230.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:31.352Z,1520500231.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:31.749Z,1520500231.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:32.146Z,1520500232.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:32.568Z,1520500232.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:32.955Z,1520500232.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:33.342Z,1520500233.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:33.751Z,1520500233.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:34.154Z,1520500234.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:34.554Z,1520500234.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:34.959Z,1520500234.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:38.302Z,1520500238.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:38.427Z,1520500238.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:38.798Z,1520500238.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:39.214Z,1520500239.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:39.602Z,1520500239.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:40.006Z,1520500240.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:40.387Z,1520500240.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:40.784Z,1520500240.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:41.185Z,1520500241.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:41.584Z,1520500241.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:42.010Z,1520500242.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:42.410Z,1520500242.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:42.782Z,1520500242.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:43.180Z,1520500243.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:43.589Z,1520500243.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:43.987Z,1520500243.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:44.395Z,1520500244.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:44.795Z,1520500244.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:45.184Z,1520500245.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:45.583Z,1520500245.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:45.983Z,1520500245.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:46.374Z,1520500246.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:46.794Z,1520500246.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:47.191Z,1520500247.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:47.621Z,1520500247.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:47.987Z,1520500247.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:48.385Z,1520500248.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:48.790Z,1520500248.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:49.183Z,1520500249.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:49.583Z,1520500249.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:49.998Z,1520500249.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:50.393Z,1520500250.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:50.840Z,1520500250.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:51.199Z,1520500251.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:51.586Z,1520500251.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:51.985Z,1520500251.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:52.383Z,1520500252.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:52.775Z,1520500252.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:53.197Z,1520500253.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:53.595Z,1520500253.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:54.025Z,1520500254.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:54.383Z,1520500254.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:54.792Z,1520500254.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:55.185Z,1520500255.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:55.593Z,1520500255.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:55.994Z,1520500255.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:56.389Z,1520500256.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:56.791Z,1520500256.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:57.190Z,1520500257.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:57.574Z,1520500257.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:58.002Z,1520500258.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:58.378Z,1520500258.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:58.771Z,1520500258.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:59.206Z,1520500259.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:59.600Z,1520500259.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:10:59.978Z,1520500259.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:00.414Z,1520500260.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:00.775Z,1520500260.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:01.202Z,1520500261.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:01.629Z,1520500261.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:02.003Z,1520500262.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:02.384Z,1520500262.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:02.800Z,1520500262.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:03.194Z,1520500263.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:03.580Z,1520500263.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:03.978Z,1520500263.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:04.391Z,1520500264.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:04.858Z,1520500264.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:05.182Z,1520500265.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:05.585Z,1520500265.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:06.011Z,1520500266.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:06.402Z,1520500266.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:06.778Z,1520500266.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:07.183Z,1520500267.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:07.606Z,1520500267.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:08.012Z,1520500268.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:08.387Z,1520500268.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:08.783Z,1520500268.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:09.190Z,1520500269.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:09.575Z,1520500269.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:09.980Z,1520500269.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:10.385Z,1520500270.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:10.798Z,1520500270.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:11.246Z,1520500271.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:11.598Z,1520500271.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:11.989Z,1520500271.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:12.390Z,1520500272.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:12.782Z,1520500272.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:13.182Z,1520500273.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:13.578Z,1520500273.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:13.991Z,1520500273.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:14.394Z,1520500274.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:14.791Z,1520500274.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:15.182Z,1520500275.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:15.595Z,1520500275.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:15.980Z,1520500275.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:16.388Z,1520500276.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:16.774Z,1520500276.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:17.198Z,1520500277.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:17.597Z,1520500277.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:17.986Z,1520500277.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:18.389Z,1520500278.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:18.785Z,1520500278.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:19.185Z,1520500279.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:19.585Z,1520500279.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:19.991Z,1520500279.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:20.402Z,1520500280.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:20.794Z,1520500280.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:21.188Z,1520500281.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:21.585Z,1520500281.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:21.993Z,1520500281.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:22.386Z,1520500282.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:22.779Z,1520500282.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:23.189Z,1520500283.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:23.593Z,1520500283.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:23.995Z,1520500283.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:24.384Z,1520500284.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:24.787Z,1520500284.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:25.195Z,1520500285.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:25.585Z,1520500285.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:25.995Z,1520500285.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:26.412Z,1520500286.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:26.806Z,1520500286.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:27.186Z,1520500287.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:27.590Z,1520500287.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:27.988Z,1520500287.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:28.391Z,1520500288.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:28.767Z,1520500288.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:29.192Z,1520500289.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:29.592Z,1520500289.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:30.035Z,1520500290.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:30.389Z,1520500290.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:30.792Z,1520500290.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:31.171Z,1520500291.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:31.598Z,1520500291.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:31.996Z,1520500291.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:32.395Z,1520500292.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:32.796Z,1520500292.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:33.193Z,1520500293.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:33.572Z,1520500293.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:33.974Z,1520500293.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:34.373Z,1520500294.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:34.795Z,1520500294.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:35.205Z,1520500295.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:35.603Z,1520500295.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:38.706Z,1520500298.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:38.827Z,1520500298.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:39.206Z,1520500299.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:39.602Z,1520500299.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:40.002Z,1520500300.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:40.382Z,1520500300.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:40.783Z,1520500300.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:41.206Z,1520500301.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:41.219Z,1520500301.219 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T09:11:41.547Z,1520500301.547 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-03-08T09:11:41.547Z,1520500301.547 [DropWeight] Hardware Fault, FailCount= 1
2018-03-08T09:11:41.547Z,1520500301.547 [DropWeight](ERROR): Hardware Fault
2018-03-08T09:11:41.618Z,1520500301.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:41.629Z,1520500301.629 [CBIT](INFO): Critical error at 20180308T091141
2018-03-08T09:11:41.631Z,1520500301.631 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-03-08T09:11:41.632Z,1520500301.632 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-03-08T09:11:42.006Z,1520500302.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:42.017Z,1520500302.017 [CBIT](INFO): Critical error at 20180308T091141
2018-03-08T09:11:42.381Z,1520500302.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:42.806Z,1520500302.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:43.202Z,1520500303.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:43.582Z,1520500303.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:44.003Z,1520500304.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:44.407Z,1520500304.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:44.782Z,1520500304.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:45.182Z,1520500305.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:45.583Z,1520500305.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:45.000Z,1520500306.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:46.384Z,1520500306.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:46.776Z,1520500306.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:47.195Z,1520500307.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:47.606Z,1520500307.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:48.007Z,1520500308.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:48.382Z,1520500308.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:48.782Z,1520500308.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:49.204Z,1520500309.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:49.602Z,1520500309.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:50.006Z,1520500310.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:50.406Z,1520500310.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:50.806Z,1520500310.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:51.203Z,1520500311.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:51.587Z,1520500311.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:51.977Z,1520500311.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:52.406Z,1520500312.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:52.801Z,1520500312.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:53.186Z,1520500313.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:53.584Z,1520500313.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:53.000Z,1520500314.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:54.406Z,1520500314.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:54.782Z,1520500314.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:55.184Z,1520500315.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:55.601Z,1520500315.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:56.006Z,1520500316.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:56.406Z,1520500316.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:56.829Z,1520500316.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:57.205Z,1520500317.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:57.604Z,1520500317.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:57.982Z,1520500317.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:58.382Z,1520500318.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:58.803Z,1520500318.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:59.188Z,1520500319.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:11:59.587Z,1520500319.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:00.011Z,1520500320.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:00.406Z,1520500320.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:00.782Z,1520500320.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:01.186Z,1520500321.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:01.580Z,1520500321.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:01.990Z,1520500321.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:02.391Z,1520500322.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:02.789Z,1520500322.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:03.184Z,1520500323.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:03.603Z,1520500323.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:04.005Z,1520500324.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:04.410Z,1520500324.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:04.781Z,1520500324.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:05.204Z,1520500325.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:05.627Z,1520500325.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:05.988Z,1520500325.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:06.385Z,1520500326.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:06.802Z,1520500326.802 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:06.802Z,1520500326.802 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30
2018-03-08T09:12:06.803Z,1520500326.803 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T09:12:06.804Z,1520500326.804 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:06.805Z,1520500326.805 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30
2018-03-08T09:12:06.805Z,1520500326.805 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T09:12:06.806Z,1520500326.806 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:06.806Z,1520500326.806 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 30
2018-03-08T09:12:06.807Z,1520500326.807 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T09:12:06.818Z,1520500326.818 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T09:12:06.818Z,1520500326.818 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T09:12:06.819Z,1520500326.819 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T09:12:07.201Z,1520500327.201 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T09:12:07.201Z,1520500327.201 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30
2018-03-08T09:12:07.202Z,1520500327.202 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T09:12:07.202Z,1520500327.202 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30
2018-03-08T09:12:07.202Z,1520500327.202 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T09:12:07.202Z,1520500327.202 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 30
2018-03-08T09:12:07.572Z,1520500327.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T09:12:07.572Z,1520500327.572 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:12:07.573Z,1520500327.573 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:12:07.573Z,1520500327.573 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T09:12:07.574Z,1520500327.574 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:12:07.574Z,1520500327.574 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:12:07.574Z,1520500327.574 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T09:12:07.575Z,1520500327.575 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:12:07.575Z,1520500327.575 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:12:07.984Z,1520500327.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T09:12:07.985Z,1520500327.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:08.424Z,1520500328.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T09:12:08.425Z,1520500328.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:08.779Z,1520500328.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T09:12:08.781Z,1520500328.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:09.174Z,1520500329.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T09:12:09.175Z,1520500329.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:09.570Z,1520500329.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T09:12:09.571Z,1520500329.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:09.984Z,1520500329.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T09:12:09.985Z,1520500329.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:10.378Z,1520500330.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T09:12:10.379Z,1520500330.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:10.785Z,1520500330.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T09:12:10.785Z,1520500330.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:11.191Z,1520500331.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T09:12:11.192Z,1520500331.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:11.597Z,1520500331.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T09:12:11.598Z,1520500331.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:12.006Z,1520500332.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T09:12:12.007Z,1520500332.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:12.373Z,1520500332.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T09:12:12.374Z,1520500332.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:12.779Z,1520500332.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T09:12:12.780Z,1520500332.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:13.184Z,1520500333.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T09:12:13.204Z,1520500333.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:13.575Z,1520500333.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T09:12:13.576Z,1520500333.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:14.002Z,1520500334.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T09:12:14.003Z,1520500334.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:14.401Z,1520500334.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T09:12:14.402Z,1520500334.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:14.801Z,1520500334.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T09:12:14.802Z,1520500334.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:15.180Z,1520500335.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T09:12:15.181Z,1520500335.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:15.576Z,1520500335.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T09:12:15.577Z,1520500335.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:15.980Z,1520500335.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T09:12:15.985Z,1520500335.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:16.405Z,1520500336.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T09:12:16.406Z,1520500336.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:16.791Z,1520500336.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T09:12:16.791Z,1520500336.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:17.182Z,1520500337.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T09:12:17.183Z,1520500337.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:17.609Z,1520500337.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T09:12:17.610Z,1520500337.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:18.006Z,1520500338.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T09:12:18.007Z,1520500338.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:18.404Z,1520500338.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T09:12:18.405Z,1520500338.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:18.785Z,1520500338.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T09:12:18.785Z,1520500338.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:19.186Z,1520500339.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T09:12:19.187Z,1520500339.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:19.602Z,1520500339.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T09:12:19.603Z,1520500339.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:20.019Z,1520500340.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T09:12:20.019Z,1520500340.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:20.394Z,1520500340.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T09:12:20.395Z,1520500340.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:20.793Z,1520500340.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T09:12:20.794Z,1520500340.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:21.202Z,1520500341.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T09:12:21.203Z,1520500341.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:21.618Z,1520500341.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T09:12:21.618Z,1520500341.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:21.988Z,1520500341.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T09:12:21.990Z,1520500341.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:22.383Z,1520500342.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T09:12:22.384Z,1520500342.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:22.795Z,1520500342.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T09:12:22.796Z,1520500342.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:23.190Z,1520500343.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T09:12:23.191Z,1520500343.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:23.594Z,1520500343.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T09:12:23.595Z,1520500343.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:24.002Z,1520500344.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T09:12:24.003Z,1520500344.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:24.415Z,1520500344.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T09:12:24.417Z,1520500344.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:24.785Z,1520500344.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T09:12:24.786Z,1520500344.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:25.187Z,1520500345.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T09:12:25.188Z,1520500345.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:25.588Z,1520500345.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T09:12:25.589Z,1520500345.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:25.996Z,1520500345.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T09:12:25.997Z,1520500345.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:26.401Z,1520500346.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T09:12:26.402Z,1520500346.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:26.799Z,1520500346.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T09:12:26.799Z,1520500346.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:27.185Z,1520500347.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:27.599Z,1520500347.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:27.981Z,1520500347.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:28.386Z,1520500348.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:28.785Z,1520500348.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:29.273Z,1520500349.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:29.598Z,1520500349.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:30.002Z,1520500350.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:30.390Z,1520500350.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:30.815Z,1520500350.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:31.202Z,1520500351.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:31.585Z,1520500351.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:31.993Z,1520500351.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:32.396Z,1520500352.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:32.796Z,1520500352.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:33.184Z,1520500353.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:33.584Z,1520500353.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:33.990Z,1520500353.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:34.388Z,1520500354.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:34.786Z,1520500354.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:35.188Z,1520500355.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:38.292Z,1520500358.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:38.428Z,1520500358.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:38.798Z,1520500358.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:39.198Z,1520500359.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:39.605Z,1520500359.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:40.004Z,1520500360.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:40.409Z,1520500360.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:40.809Z,1520500360.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:41.198Z,1520500361.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:41.600Z,1520500361.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:42.001Z,1520500362.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:42.401Z,1520500362.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:42.797Z,1520500362.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:43.206Z,1520500363.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:43.614Z,1520500363.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:44.004Z,1520500364.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:44.390Z,1520500364.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:44.811Z,1520500364.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:45.230Z,1520500365.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:45.603Z,1520500365.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:46.011Z,1520500366.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:46.396Z,1520500366.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:46.811Z,1520500366.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:47.201Z,1520500367.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:47.597Z,1520500367.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:48.003Z,1520500368.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:48.423Z,1520500368.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:48.805Z,1520500368.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:49.211Z,1520500369.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:49.605Z,1520500369.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:50.024Z,1520500370.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:50.417Z,1520500370.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:50.803Z,1520500370.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:51.212Z,1520500371.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:51.606Z,1520500371.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:52.021Z,1520500372.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:52.391Z,1520500372.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:52.799Z,1520500372.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:53.208Z,1520500373.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:53.599Z,1520500373.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:53.999Z,1520500373.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:54.408Z,1520500374.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:54.805Z,1520500374.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:55.201Z,1520500375.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:55.615Z,1520500375.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:56.011Z,1520500376.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:56.395Z,1520500376.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:56.811Z,1520500376.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:57.197Z,1520500377.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:57.592Z,1520500377.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:58.011Z,1520500378.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:58.409Z,1520500378.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:58.802Z,1520500378.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:59.199Z,1520500379.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:59.598Z,1520500379.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:12:59.992Z,1520500379.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:00.399Z,1520500380.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:00.804Z,1520500380.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:01.203Z,1520500381.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:01.611Z,1520500381.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:02.010Z,1520500382.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:02.402Z,1520500382.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:02.800Z,1520500382.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:03.203Z,1520500383.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:03.597Z,1520500383.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:04.007Z,1520500384.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:04.412Z,1520500384.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:04.813Z,1520500384.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:05.188Z,1520500385.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:05.589Z,1520500385.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:06.007Z,1520500386.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:06.418Z,1520500386.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:06.790Z,1520500386.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:07.214Z,1520500387.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:07.607Z,1520500387.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:08.007Z,1520500388.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:08.386Z,1520500388.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:08.787Z,1520500388.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:09.215Z,1520500389.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:09.585Z,1520500389.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:10.011Z,1520500390.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:10.410Z,1520500390.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:10.809Z,1520500390.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:11.189Z,1520500391.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:11.591Z,1520500391.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:11.988Z,1520500391.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:12.393Z,1520500392.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:12.793Z,1520500392.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:13.199Z,1520500393.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:13.620Z,1520500393.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:14.006Z,1520500394.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:14.391Z,1520500394.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:14.796Z,1520500394.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:15.193Z,1520500395.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:15.619Z,1520500395.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:15.999Z,1520500395.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:16.398Z,1520500396.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:16.800Z,1520500396.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:17.198Z,1520500397.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:17.595Z,1520500397.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:17.997Z,1520500397.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:18.394Z,1520500398.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:18.804Z,1520500398.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:19.204Z,1520500399.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:19.605Z,1520500399.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:20.004Z,1520500400.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:20.401Z,1520500400.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:20.796Z,1520500400.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:21.207Z,1520500401.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:21.605Z,1520500401.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:22.014Z,1520500402.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:22.418Z,1520500402.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:22.804Z,1520500402.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:23.196Z,1520500403.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:23.613Z,1520500403.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:23.981Z,1520500403.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:24.410Z,1520500404.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:24.810Z,1520500404.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:25.204Z,1520500405.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:25.614Z,1520500405.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:26.009Z,1520500406.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:26.406Z,1520500406.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:26.799Z,1520500406.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:27.217Z,1520500407.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:27.586Z,1520500407.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:28.007Z,1520500408.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:28.414Z,1520500408.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:28.791Z,1520500408.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:29.191Z,1520500409.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:29.588Z,1520500409.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:30.010Z,1520500410.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:30.418Z,1520500410.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:30.793Z,1520500410.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:31.196Z,1520500411.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:31.617Z,1520500411.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:31.997Z,1520500411.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:32.420Z,1520500412.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:32.798Z,1520500412.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:33.191Z,1520500413.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:33.587Z,1520500413.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:34.000Z,1520500414.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:34.421Z,1520500414.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:34.795Z,1520500414.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:34.798Z,1520500414.798 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T09:13:34.799Z,1520500414.799 [Default:CheckIn:C.Wait] Stopped
2018-03-08T09:13:34.799Z,1520500414.799 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T09:13:34.799Z,1520500414.799 [Default:CheckIn:D] Running Loop=1
2018-03-08T09:13:35.198Z,1520500415.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:35.201Z,1520500415.201 [Default:CheckIn:D] Stopped
2018-03-08T09:13:35.202Z,1520500415.202 [Default:CheckIn:E] Running Loop=1
2018-03-08T09:13:38.299Z,1520500418.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:38.303Z,1520500418.303 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 87.839933 min 
2018-03-08T09:13:38.303Z,1520500418.303 [Default:CheckIn:E] Stopped
2018-03-08T09:13:38.303Z,1520500418.303 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T09:13:38.303Z,1520500418.303 [Default:CheckIn] Stopped
2018-03-08T09:13:38.303Z,1520500418.303 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T09:13:38.303Z,1520500418.303 [Default:CheckIn](INFO): Running loop #9
2018-03-08T09:13:38.303Z,1520500418.303 [Default:CheckIn] Running Loop=9
2018-03-08T09:13:38.304Z,1520500418.304 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T09:13:38.304Z,1520500418.304 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T09:13:38.419Z,1520500418.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:38.851Z,1520500418.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:39.249Z,1520500419.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:39.647Z,1520500419.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:40.038Z,1520500420.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:40.453Z,1520500420.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:40.851Z,1520500420.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:41.257Z,1520500421.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:41.658Z,1520500421.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:42.024Z,1520500422.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:42.450Z,1520500422.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:42.853Z,1520500422.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:43.232Z,1520500423.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:43.658Z,1520500423.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:44.033Z,1520500424.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:44.427Z,1520500424.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:44.850Z,1520500424.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:45.259Z,1520500425.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:45.653Z,1520500425.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:46.035Z,1520500426.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:46.432Z,1520500426.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:46.856Z,1520500426.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:47.263Z,1520500427.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:47.663Z,1520500427.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:48.030Z,1520500428.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:48.434Z,1520500428.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:48.862Z,1520500428.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:49.237Z,1520500429.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:49.657Z,1520500429.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:50.035Z,1520500430.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:50.438Z,1520500430.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:50.848Z,1520500430.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:51.245Z,1520500431.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:51.641Z,1520500431.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:52.042Z,1520500432.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:52.438Z,1520500432.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:52.840Z,1520500432.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:53.246Z,1520500433.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:53.644Z,1520500433.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:54.034Z,1520500434.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:54.439Z,1520500434.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:54.855Z,1520500434.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:55.254Z,1520500435.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:55.654Z,1520500435.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:56.044Z,1520500436.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:56.451Z,1520500436.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:56.856Z,1520500436.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:57.262Z,1520500437.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:57.649Z,1520500437.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:58.046Z,1520500438.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:58.448Z,1520500438.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:58.848Z,1520500438.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:59.250Z,1520500439.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:13:59.653Z,1520500439.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:00.053Z,1520500440.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:00.458Z,1520500440.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:00.852Z,1520500440.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:01.249Z,1520500441.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:01.658Z,1520500441.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:02.049Z,1520500442.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:02.444Z,1520500442.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:02.852Z,1520500442.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:03.253Z,1520500443.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:03.656Z,1520500443.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:04.035Z,1520500444.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:04.434Z,1520500444.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:04.862Z,1520500444.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:05.257Z,1520500445.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:05.666Z,1520500445.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:06.033Z,1520500446.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:06.439Z,1520500446.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:06.863Z,1520500446.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:07.260Z,1520500447.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:07.640Z,1520500447.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:08.035Z,1520500448.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:08.431Z,1520500448.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:08.862Z,1520500448.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:09.256Z,1520500449.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:09.648Z,1520500449.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:10.042Z,1520500450.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:10.437Z,1520500450.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:10.841Z,1520500450.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:11.245Z,1520500451.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:11.639Z,1520500451.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:12.042Z,1520500452.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:12.437Z,1520500452.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:12.839Z,1520500452.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:13.245Z,1520500453.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:13.641Z,1520500453.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:14.039Z,1520500454.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:14.437Z,1520500454.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:14.839Z,1520500454.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:15.240Z,1520500455.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:15.641Z,1520500455.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:16.038Z,1520500456.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:16.437Z,1520500456.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:16.841Z,1520500456.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:17.240Z,1520500457.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:17.646Z,1520500457.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:18.035Z,1520500458.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:18.433Z,1520500458.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:18.839Z,1520500458.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:19.273Z,1520500459.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:19.646Z,1520500459.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:20.032Z,1520500460.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:20.433Z,1520500460.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:20.840Z,1520500460.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:21.244Z,1520500461.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:21.641Z,1520500461.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:22.042Z,1520500462.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:22.438Z,1520500462.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:22.841Z,1520500462.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:23.240Z,1520500463.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:23.640Z,1520500463.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:24.034Z,1520500464.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:24.434Z,1520500464.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:24.841Z,1520500464.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:25.241Z,1520500465.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:25.642Z,1520500465.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:26.042Z,1520500466.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:26.436Z,1520500466.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:26.844Z,1520500466.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:27.244Z,1520500467.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:27.648Z,1520500467.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:28.035Z,1520500468.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:28.438Z,1520500468.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:28.848Z,1520500468.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:29.247Z,1520500469.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:29.644Z,1520500469.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:30.038Z,1520500470.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:30.436Z,1520500470.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:30.843Z,1520500470.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:31.248Z,1520500471.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:31.644Z,1520500471.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:32.034Z,1520500472.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:32.438Z,1520500472.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:32.843Z,1520500472.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:33.247Z,1520500473.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:33.643Z,1520500473.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:34.038Z,1520500474.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:34.440Z,1520500474.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:34.854Z,1520500474.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:35.247Z,1520500475.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:38.383Z,1520500478.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:38.530Z,1520500478.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:38.858Z,1520500478.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:39.257Z,1520500479.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:39.657Z,1520500479.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:40.082Z,1520500480.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:40.463Z,1520500480.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:40.856Z,1520500480.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:41.252Z,1520500481.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:41.656Z,1520500481.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:42.053Z,1520500482.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:42.453Z,1520500482.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:42.858Z,1520500482.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:43.258Z,1520500483.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:43.661Z,1520500483.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:44.056Z,1520500484.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:44.452Z,1520500484.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:44.861Z,1520500484.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:45.264Z,1520500485.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:45.659Z,1520500485.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:46.058Z,1520500486.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:46.457Z,1520500486.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:46.859Z,1520500486.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:47.264Z,1520500487.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:47.666Z,1520500487.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:48.056Z,1520500488.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:48.453Z,1520500488.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:48.866Z,1520500488.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:49.259Z,1520500489.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:49.660Z,1520500489.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:50.054Z,1520500490.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:50.458Z,1520500490.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:50.861Z,1520500490.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:51.260Z,1520500491.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:51.661Z,1520500491.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:52.063Z,1520500492.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:52.457Z,1520500492.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:52.862Z,1520500492.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:53.264Z,1520500493.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:53.660Z,1520500493.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:54.057Z,1520500494.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:54.458Z,1520500494.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:54.860Z,1520500494.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:55.259Z,1520500495.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:55.666Z,1520500495.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:56.057Z,1520500496.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:56.458Z,1520500496.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:56.860Z,1520500496.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:57.259Z,1520500497.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:57.662Z,1520500497.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:58.062Z,1520500498.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:58.452Z,1520500498.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:58.862Z,1520500498.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:59.264Z,1520500499.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:14:59.666Z,1520500499.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:00.052Z,1520500500.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:00.458Z,1520500500.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:00.863Z,1520500500.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:01.266Z,1520500501.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:01.663Z,1520500501.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:02.059Z,1520500502.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:02.458Z,1520500502.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:02.863Z,1520500502.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:03.264Z,1520500503.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:03.670Z,1520500503.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:04.062Z,1520500504.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:04.461Z,1520500504.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:04.869Z,1520500504.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:05.265Z,1520500505.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:05.663Z,1520500505.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:06.123Z,1520500506.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:06.458Z,1520500506.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:06.864Z,1520500506.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:07.261Z,1520500507.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:07.663Z,1520500507.663 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:07.663Z,1520500507.663 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31
2018-03-08T09:15:07.663Z,1520500507.663 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T09:15:07.665Z,1520500507.665 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:07.665Z,1520500507.665 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31
2018-03-08T09:15:07.665Z,1520500507.665 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T09:15:07.667Z,1520500507.667 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:07.667Z,1520500507.667 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 31
2018-03-08T09:15:07.667Z,1520500507.667 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T09:15:07.691Z,1520500507.691 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T09:15:07.691Z,1520500507.691 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T09:15:07.691Z,1520500507.691 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T09:15:08.069Z,1520500508.069 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T09:15:08.069Z,1520500508.069 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31
2018-03-08T09:15:08.070Z,1520500508.070 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T09:15:08.070Z,1520500508.070 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31
2018-03-08T09:15:08.070Z,1520500508.070 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T09:15:08.070Z,1520500508.070 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 31
2018-03-08T09:15:08.450Z,1520500508.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T09:15:08.450Z,1520500508.450 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:15:08.451Z,1520500508.451 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:15:08.451Z,1520500508.451 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T09:15:08.451Z,1520500508.451 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:15:08.452Z,1520500508.452 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:15:08.452Z,1520500508.452 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T09:15:08.453Z,1520500508.453 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:15:08.453Z,1520500508.453 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:15:08.874Z,1520500508.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T09:15:08.875Z,1520500508.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:09.272Z,1520500509.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T09:15:09.274Z,1520500509.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:09.661Z,1520500509.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T09:15:09.662Z,1520500509.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:10.059Z,1520500510.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T09:15:10.060Z,1520500510.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:10.461Z,1520500510.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T09:15:10.462Z,1520500510.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:10.864Z,1520500510.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T09:15:10.865Z,1520500510.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:11.267Z,1520500511.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T09:15:11.268Z,1520500511.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:11.670Z,1520500511.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T09:15:11.671Z,1520500511.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:12.060Z,1520500512.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T09:15:12.061Z,1520500512.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:12.462Z,1520500512.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T09:15:12.463Z,1520500512.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:12.872Z,1520500512.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T09:15:12.873Z,1520500512.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:13.272Z,1520500513.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T09:15:13.273Z,1520500513.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:13.667Z,1520500513.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T09:15:13.668Z,1520500513.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:14.068Z,1520500514.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T09:15:14.069Z,1520500514.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:14.464Z,1520500514.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T09:15:14.465Z,1520500514.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:14.873Z,1520500514.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T09:15:14.874Z,1520500514.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:15.268Z,1520500515.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T09:15:15.269Z,1520500515.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:15.672Z,1520500515.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T09:15:15.673Z,1520500515.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:16.058Z,1520500516.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T09:15:16.059Z,1520500516.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:16.472Z,1520500516.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T09:15:16.473Z,1520500516.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:16.864Z,1520500516.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T09:15:16.869Z,1520500516.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:17.278Z,1520500517.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T09:15:17.279Z,1520500517.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:17.682Z,1520500517.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T09:15:17.683Z,1520500517.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:18.050Z,1520500518.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T09:15:18.051Z,1520500518.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:18.453Z,1520500518.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T09:15:18.454Z,1520500518.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:18.883Z,1520500518.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T09:15:18.884Z,1520500518.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:19.252Z,1520500519.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T09:15:19.253Z,1520500519.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:19.679Z,1520500519.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T09:15:19.680Z,1520500519.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:20.053Z,1520500520.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T09:15:20.054Z,1520500520.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:20.448Z,1520500520.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T09:15:20.449Z,1520500520.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:20.879Z,1520500520.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T09:15:20.881Z,1520500520.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:21.281Z,1520500521.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T09:15:21.282Z,1520500521.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:21.658Z,1520500521.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T09:15:21.659Z,1520500521.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:22.055Z,1520500522.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T09:15:22.056Z,1520500522.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:22.450Z,1520500522.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T09:15:22.451Z,1520500522.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:22.862Z,1520500522.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T09:15:22.863Z,1520500522.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:23.268Z,1520500523.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T09:15:23.285Z,1520500523.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:23.666Z,1520500523.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T09:15:23.667Z,1520500523.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:24.052Z,1520500524.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T09:15:24.053Z,1520500524.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:24.463Z,1520500524.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T09:15:24.464Z,1520500524.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:24.868Z,1520500524.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T09:15:24.869Z,1520500524.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:25.265Z,1520500525.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T09:15:25.266Z,1520500525.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:25.662Z,1520500525.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T09:15:25.663Z,1520500525.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:26.058Z,1520500526.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T09:15:26.059Z,1520500526.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:26.462Z,1520500526.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T09:15:26.463Z,1520500526.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:26.870Z,1520500526.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T09:15:26.871Z,1520500526.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:27.267Z,1520500527.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T09:15:27.268Z,1520500527.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:27.660Z,1520500527.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T09:15:27.661Z,1520500527.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:28.063Z,1520500528.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:28.451Z,1520500528.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:28.864Z,1520500528.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:29.272Z,1520500529.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:29.667Z,1520500529.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:30.066Z,1520500530.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:30.462Z,1520500530.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:30.864Z,1520500530.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:31.264Z,1520500531.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:31.664Z,1520500531.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:32.059Z,1520500532.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:32.462Z,1520500532.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:32.871Z,1520500532.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:33.267Z,1520500533.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:33.665Z,1520500533.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:34.059Z,1520500534.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:34.464Z,1520500534.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:34.870Z,1520500534.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:35.274Z,1520500535.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:38.403Z,1520500538.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:38.522Z,1520500538.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:38.878Z,1520500538.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:39.271Z,1520500539.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:39.669Z,1520500539.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:40.101Z,1520500540.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:40.502Z,1520500540.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:40.878Z,1520500540.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:41.271Z,1520500541.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:41.671Z,1520500541.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:42.069Z,1520500542.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:42.471Z,1520500542.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:42.902Z,1520500542.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:43.272Z,1520500543.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:43.684Z,1520500543.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:44.074Z,1520500544.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:44.473Z,1520500544.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:44.877Z,1520500544.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:45.307Z,1520500545.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:45.675Z,1520500545.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:46.075Z,1520500546.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:46.475Z,1520500546.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:46.877Z,1520500546.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:47.304Z,1520500547.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:47.711Z,1520500547.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:48.075Z,1520500548.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:48.481Z,1520500548.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:48.883Z,1520500548.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:49.275Z,1520500549.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:49.682Z,1520500549.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:50.090Z,1520500550.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:50.507Z,1520500550.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:50.894Z,1520500550.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:51.290Z,1520500551.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:51.689Z,1520500551.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:52.086Z,1520500552.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:52.471Z,1520500552.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:52.891Z,1520500552.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:53.291Z,1520500553.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:53.691Z,1520500553.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:54.095Z,1520500554.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:54.474Z,1520500554.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:54.901Z,1520500554.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:55.296Z,1520500555.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:55.699Z,1520500555.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:56.075Z,1520500556.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:56.475Z,1520500556.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:56.898Z,1520500556.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:57.296Z,1520500557.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:57.684Z,1520500557.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:58.077Z,1520500558.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:58.475Z,1520500558.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:58.888Z,1520500558.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:59.285Z,1520500559.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:15:59.679Z,1520500559.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:00.075Z,1520500560.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:00.476Z,1520500560.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:00.881Z,1520500560.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:01.281Z,1520500561.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:01.679Z,1520500561.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:02.080Z,1520500562.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:02.478Z,1520500562.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:02.886Z,1520500562.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:03.284Z,1520500563.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:03.681Z,1520500563.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:04.075Z,1520500564.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:04.474Z,1520500564.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:04.887Z,1520500564.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:05.284Z,1520500565.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:05.680Z,1520500565.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:06.079Z,1520500566.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:06.476Z,1520500566.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:06.880Z,1520500566.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:07.284Z,1520500567.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:07.683Z,1520500567.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:08.077Z,1520500568.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:08.477Z,1520500568.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:08.887Z,1520500568.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:09.286Z,1520500569.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:09.686Z,1520500569.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:10.077Z,1520500570.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:10.478Z,1520500570.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:10.881Z,1520500570.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:11.284Z,1520500571.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:11.680Z,1520500571.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:12.077Z,1520500572.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:12.473Z,1520500572.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:12.886Z,1520500572.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:13.282Z,1520500573.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:13.687Z,1520500573.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:14.078Z,1520500574.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:14.486Z,1520500574.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:14.886Z,1520500574.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:15.283Z,1520500575.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:15.690Z,1520500575.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:16.082Z,1520500576.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:16.478Z,1520500576.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:16.883Z,1520500576.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:17.284Z,1520500577.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:17.685Z,1520500577.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:18.109Z,1520500578.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:18.475Z,1520500578.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:18.888Z,1520500578.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:19.294Z,1520500579.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:19.687Z,1520500579.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:20.078Z,1520500580.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:20.483Z,1520500580.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:20.884Z,1520500580.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:21.287Z,1520500581.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:21.687Z,1520500581.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:22.086Z,1520500582.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:22.477Z,1520500582.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:22.887Z,1520500582.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:23.287Z,1520500583.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:23.688Z,1520500583.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:24.084Z,1520500584.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:24.475Z,1520500584.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:24.892Z,1520500584.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:25.304Z,1520500585.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:25.713Z,1520500585.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:26.122Z,1520500586.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:26.491Z,1520500586.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:26.899Z,1520500586.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:27.292Z,1520500587.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:27.692Z,1520500587.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:28.074Z,1520500588.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:28.470Z,1520500588.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:28.891Z,1520500588.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:29.290Z,1520500589.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:29.695Z,1520500589.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:30.075Z,1520500590.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:30.474Z,1520500590.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:30.876Z,1520500590.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:31.288Z,1520500591.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:31.681Z,1520500591.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:32.075Z,1520500592.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:32.477Z,1520500592.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:32.881Z,1520500592.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:33.284Z,1520500593.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:33.681Z,1520500593.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:34.074Z,1520500594.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:34.470Z,1520500594.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:34.909Z,1520500594.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:35.291Z,1520500595.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:38.384Z,1520500598.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:38.518Z,1520500598.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:38.888Z,1520500598.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:39.284Z,1520500599.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:39.684Z,1520500599.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:40.089Z,1520500600.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:40.492Z,1520500600.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:40.889Z,1520500600.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:41.282Z,1520500601.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:41.683Z,1520500601.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:42.085Z,1520500602.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:42.487Z,1520500602.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:42.892Z,1520500602.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:43.298Z,1520500603.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:43.695Z,1520500603.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:44.085Z,1520500604.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:44.490Z,1520500604.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:44.883Z,1520500604.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:45.282Z,1520500605.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:45.681Z,1520500605.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:46.091Z,1520500606.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:46.495Z,1520500606.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:46.891Z,1520500606.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:47.290Z,1520500607.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:47.685Z,1520500607.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:48.086Z,1520500608.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:48.484Z,1520500608.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:48.892Z,1520500608.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:49.295Z,1520500609.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:49.696Z,1520500609.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:50.095Z,1520500610.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:50.482Z,1520500610.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:50.891Z,1520500610.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:51.297Z,1520500611.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:51.692Z,1520500611.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:52.090Z,1520500612.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:52.487Z,1520500612.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:52.892Z,1520500612.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:53.298Z,1520500613.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:53.698Z,1520500613.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:54.088Z,1520500614.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:54.491Z,1520500614.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:54.896Z,1520500614.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:55.291Z,1520500615.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:55.706Z,1520500615.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:56.089Z,1520500616.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:56.490Z,1520500616.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:56.938Z,1520500616.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:57.314Z,1520500617.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:57.692Z,1520500617.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:58.090Z,1520500618.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:58.494Z,1520500618.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:58.901Z,1520500618.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:59.307Z,1520500619.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:16:59.695Z,1520500619.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:00.086Z,1520500620.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:00.497Z,1520500620.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:00.902Z,1520500620.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:01.295Z,1520500621.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:01.694Z,1520500621.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:02.100Z,1520500622.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:02.471Z,1520500622.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:02.899Z,1520500622.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:03.306Z,1520500623.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:03.700Z,1520500623.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:04.106Z,1520500624.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:04.479Z,1520500624.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:04.901Z,1520500624.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:05.304Z,1520500625.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:05.710Z,1520500625.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:06.075Z,1520500626.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:06.483Z,1520500626.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:06.882Z,1520500626.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:07.279Z,1520500627.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:07.683Z,1520500627.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:08.118Z,1520500628.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:08.492Z,1520500628.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:08.896Z,1520500628.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:09.285Z,1520500629.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:09.679Z,1520500629.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:10.090Z,1520500630.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:10.486Z,1520500630.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:10.891Z,1520500630.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:11.292Z,1520500631.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:11.691Z,1520500631.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:12.087Z,1520500632.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:12.486Z,1520500632.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:12.879Z,1520500632.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:13.286Z,1520500633.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:13.731Z,1520500633.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:14.106Z,1520500634.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:14.493Z,1520500634.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:14.891Z,1520500634.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:15.286Z,1520500635.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:15.683Z,1520500635.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:16.087Z,1520500636.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:16.484Z,1520500636.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:16.895Z,1520500636.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:17.300Z,1520500637.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:17.697Z,1520500637.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:18.091Z,1520500638.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:18.487Z,1520500638.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:18.894Z,1520500638.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:19.303Z,1520500639.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:19.703Z,1520500639.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:20.114Z,1520500640.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:20.508Z,1520500640.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:20.915Z,1520500640.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:21.338Z,1520500641.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:21.711Z,1520500641.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:22.112Z,1520500642.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:22.519Z,1520500642.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:22.919Z,1520500642.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:23.317Z,1520500643.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:23.705Z,1520500643.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:24.080Z,1520500644.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:24.482Z,1520500644.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:24.904Z,1520500644.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:25.304Z,1520500645.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:25.703Z,1520500645.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:26.079Z,1520500646.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:26.481Z,1520500646.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:26.886Z,1520500646.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:27.282Z,1520500647.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:27.676Z,1520500647.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:28.103Z,1520500648.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:28.506Z,1520500648.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:28.885Z,1520500648.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:29.282Z,1520500649.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:29.678Z,1520500649.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:30.086Z,1520500650.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:30.478Z,1520500650.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:30.911Z,1520500650.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:31.284Z,1520500651.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:31.710Z,1520500651.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:32.082Z,1520500652.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:32.486Z,1520500652.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:32.878Z,1520500652.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:33.286Z,1520500653.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:33.677Z,1520500653.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:34.111Z,1520500654.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:34.483Z,1520500654.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:34.880Z,1520500654.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:35.283Z,1520500655.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:38.763Z,1520500658.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:38.875Z,1520500658.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:39.255Z,1520500659.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:39.670Z,1520500659.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:40.037Z,1520500660.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:40.433Z,1520500660.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:40.834Z,1520500660.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:41.236Z,1520500661.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:41.639Z,1520500661.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:42.040Z,1520500662.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:42.450Z,1520500662.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:42.856Z,1520500662.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:43.246Z,1520500663.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:43.623Z,1520500663.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:44.030Z,1520500664.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:44.423Z,1520500664.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:44.853Z,1520500664.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:45.260Z,1520500665.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:45.681Z,1520500665.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:46.040Z,1520500666.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:46.479Z,1520500666.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:46.882Z,1520500666.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:47.251Z,1520500667.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:47.644Z,1520500667.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:48.042Z,1520500668.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:48.477Z,1520500668.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:48.875Z,1520500668.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:49.254Z,1520500669.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:49.654Z,1520500669.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:50.039Z,1520500670.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:50.434Z,1520500670.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:50.851Z,1520500670.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:51.247Z,1520500671.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:51.648Z,1520500671.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:52.093Z,1520500672.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:52.442Z,1520500672.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:52.850Z,1520500672.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:53.251Z,1520500673.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:53.648Z,1520500673.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:54.039Z,1520500674.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:54.439Z,1520500674.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:54.844Z,1520500674.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:55.249Z,1520500675.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:55.649Z,1520500675.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:56.038Z,1520500676.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:56.436Z,1520500676.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:56.845Z,1520500676.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:57.254Z,1520500677.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:57.648Z,1520500677.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:58.035Z,1520500678.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:58.441Z,1520500678.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:58.844Z,1520500678.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:59.243Z,1520500679.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:17:59.645Z,1520500679.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:00.037Z,1520500680.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:00.442Z,1520500680.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:00.844Z,1520500680.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:01.248Z,1520500681.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:01.648Z,1520500681.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:02.046Z,1520500682.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:02.438Z,1520500682.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:02.835Z,1520500682.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:03.248Z,1520500683.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:03.655Z,1520500683.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:04.061Z,1520500684.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:04.440Z,1520500684.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:04.842Z,1520500684.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:05.240Z,1520500685.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:05.641Z,1520500685.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:06.045Z,1520500686.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:06.452Z,1520500686.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:06.844Z,1520500686.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:07.242Z,1520500687.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:07.642Z,1520500687.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:08.042Z,1520500688.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:08.447Z,1520500688.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:08.851Z,1520500688.851 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:08.851Z,1520500688.851 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32
2018-03-08T09:18:08.851Z,1520500688.851 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T09:18:08.853Z,1520500688.853 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:08.853Z,1520500688.853 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32
2018-03-08T09:18:08.853Z,1520500688.853 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T09:18:08.855Z,1520500688.855 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:08.855Z,1520500688.855 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 32
2018-03-08T09:18:08.855Z,1520500688.855 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T09:18:08.867Z,1520500688.867 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T09:18:08.867Z,1520500688.867 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T09:18:08.868Z,1520500688.868 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T09:18:09.261Z,1520500689.261 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T09:18:09.261Z,1520500689.261 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32
2018-03-08T09:18:09.262Z,1520500689.262 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T09:18:09.262Z,1520500689.262 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32
2018-03-08T09:18:09.262Z,1520500689.262 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T09:18:09.263Z,1520500689.263 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 32
2018-03-08T09:18:09.644Z,1520500689.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T09:18:09.645Z,1520500689.645 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:18:09.645Z,1520500689.645 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:18:09.645Z,1520500689.645 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T09:18:09.646Z,1520500689.646 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:18:09.646Z,1520500689.646 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:18:09.646Z,1520500689.646 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T09:18:09.647Z,1520500689.647 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:18:09.647Z,1520500689.647 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:18:10.038Z,1520500690.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T09:18:10.039Z,1520500690.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:10.452Z,1520500690.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T09:18:10.453Z,1520500690.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:10.853Z,1520500690.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T09:18:10.854Z,1520500690.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:11.232Z,1520500691.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T09:18:11.245Z,1520500691.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:11.652Z,1520500691.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T09:18:11.653Z,1520500691.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:12.033Z,1520500692.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T09:18:12.034Z,1520500692.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:12.434Z,1520500692.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T09:18:12.435Z,1520500692.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:12.859Z,1520500692.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T09:18:12.860Z,1520500692.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:13.259Z,1520500693.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T09:18:13.260Z,1520500693.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:13.659Z,1520500693.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T09:18:13.660Z,1520500693.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:14.039Z,1520500694.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T09:18:14.040Z,1520500694.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:14.430Z,1520500694.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T09:18:14.431Z,1520500694.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:14.832Z,1520500694.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T09:18:14.833Z,1520500694.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:15.260Z,1520500695.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T09:18:15.261Z,1520500695.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:15.640Z,1520500695.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T09:18:15.641Z,1520500695.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:16.031Z,1520500696.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T09:18:16.032Z,1520500696.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:16.434Z,1520500696.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T09:18:16.435Z,1520500696.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:16.844Z,1520500696.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T09:18:16.865Z,1520500696.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:17.269Z,1520500697.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T09:18:17.270Z,1520500697.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:17.644Z,1520500697.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T09:18:17.661Z,1520500697.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:18.035Z,1520500698.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T09:18:18.037Z,1520500698.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:18.432Z,1520500698.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T09:18:18.433Z,1520500698.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:18.865Z,1520500698.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T09:18:18.865Z,1520500698.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:19.240Z,1520500699.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T09:18:19.241Z,1520500699.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:19.665Z,1520500699.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T09:18:19.665Z,1520500699.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:20.033Z,1520500700.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T09:18:20.034Z,1520500700.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:20.442Z,1520500700.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T09:18:20.443Z,1520500700.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:20.841Z,1520500700.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T09:18:20.842Z,1520500700.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:21.244Z,1520500701.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T09:18:21.245Z,1520500701.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:21.641Z,1520500701.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T09:18:21.642Z,1520500701.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:22.038Z,1520500702.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T09:18:22.038Z,1520500702.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:22.433Z,1520500702.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T09:18:22.434Z,1520500702.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:22.841Z,1520500702.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T09:18:22.842Z,1520500702.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:23.243Z,1520500703.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T09:18:23.244Z,1520500703.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:23.647Z,1520500703.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T09:18:23.648Z,1520500703.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:24.038Z,1520500704.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T09:18:24.039Z,1520500704.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:24.438Z,1520500704.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T09:18:24.439Z,1520500704.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:24.842Z,1520500704.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T09:18:24.843Z,1520500704.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:25.244Z,1520500705.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T09:18:25.245Z,1520500705.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:25.640Z,1520500705.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T09:18:25.641Z,1520500705.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:26.037Z,1520500706.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T09:18:26.038Z,1520500706.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:26.435Z,1520500706.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T09:18:26.436Z,1520500706.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:26.840Z,1520500706.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T09:18:26.841Z,1520500706.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:27.240Z,1520500707.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T09:18:27.241Z,1520500707.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:27.670Z,1520500707.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T09:18:27.671Z,1520500707.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:28.034Z,1520500708.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T09:18:28.035Z,1520500708.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:28.442Z,1520500708.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T09:18:28.443Z,1520500708.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:28.840Z,1520500708.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T09:18:28.841Z,1520500708.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:29.244Z,1520500709.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:29.640Z,1520500709.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:30.039Z,1520500710.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:30.430Z,1520500710.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:30.847Z,1520500710.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:31.249Z,1520500711.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:31.644Z,1520500711.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:32.038Z,1520500712.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:32.434Z,1520500712.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:32.847Z,1520500712.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:33.255Z,1520500713.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:33.648Z,1520500713.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:34.039Z,1520500714.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:34.433Z,1520500714.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:34.844Z,1520500714.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:35.254Z,1520500715.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:35.655Z,1520500715.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:38.744Z,1520500718.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:38.747Z,1520500718.747 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T09:13:38.3Z
2018-03-08T09:18:38.747Z,1520500718.747 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T09:18:38.747Z,1520500718.747 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T09:18:38.887Z,1520500718.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:39.271Z,1520500719.271 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20180308T074127/Courier0036.lzma
2018-03-08T09:18:39.340Z,1520500719.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:39.636Z,1520500719.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:39.974Z,1520500719.974 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0036.lzma.bak
2018-03-08T09:18:39.974Z,1520500719.974 [DataOverHttps](INFO): SBD MOMSN=7984441
2018-03-08T09:18:40.050Z,1520500720.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:40.600Z,1520500720.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:40.811Z,1520500720.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:44.152Z,1520500724.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:44.287Z,1520500724.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:44.642Z,1520500724.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:45.050Z,1520500725.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:45.442Z,1520500725.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:45.835Z,1520500725.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:46.235Z,1520500726.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:49.334Z,1520500729.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:49.490Z,1520500729.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:49.765Z,1520500729.765 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180308T074127/Express0037.lzma
2018-03-08T09:18:49.830Z,1520500729.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:50.208Z,1520500730.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:50.559Z,1520500730.559 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0037.lzma.bak
2018-03-08T09:18:50.559Z,1520500730.559 [DataOverHttps](INFO): SBD MOMSN=7984445
2018-03-08T09:18:50.616Z,1520500730.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:51.167Z,1520500731.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:51.193Z,1520500731.193 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T09:18:51.193Z,1520500731.193 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T09:18:51.193Z,1520500731.193 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T09:18:51.435Z,1520500731.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:54.520Z,1520500734.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:54.678Z,1520500734.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:55.039Z,1520500735.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:55.414Z,1520500735.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:55.815Z,1520500735.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:56.214Z,1520500736.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:56.619Z,1520500736.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:57.043Z,1520500737.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:57.444Z,1520500737.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:57.843Z,1520500737.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:58.213Z,1520500738.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:58.611Z,1520500738.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:59.018Z,1520500739.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:59.411Z,1520500739.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:18:59.811Z,1520500739.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:00.245Z,1520500740.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:00.624Z,1520500740.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:01.024Z,1520500741.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:01.410Z,1520500741.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:01.815Z,1520500741.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:02.233Z,1520500742.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:02.617Z,1520500742.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:03.021Z,1520500743.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:03.424Z,1520500743.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:03.823Z,1520500743.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:04.211Z,1520500744.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:04.613Z,1520500744.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:05.019Z,1520500745.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:05.416Z,1520500745.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:05.822Z,1520500745.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:06.220Z,1520500746.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:06.620Z,1520500746.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:07.020Z,1520500747.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:07.414Z,1520500747.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:07.823Z,1520500747.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:08.223Z,1520500748.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:08.618Z,1520500748.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:09.021Z,1520500749.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:09.424Z,1520500749.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:09.820Z,1520500749.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:10.218Z,1520500750.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:10.620Z,1520500750.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:11.018Z,1520500751.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:11.422Z,1520500751.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:11.817Z,1520500751.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:12.226Z,1520500752.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:12.624Z,1520500752.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:13.026Z,1520500753.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:13.418Z,1520500753.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:13.815Z,1520500753.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:14.218Z,1520500754.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:14.619Z,1520500754.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:15.021Z,1520500755.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:15.421Z,1520500755.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:15.826Z,1520500755.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:16.216Z,1520500756.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:16.618Z,1520500756.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:17.018Z,1520500757.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:17.423Z,1520500757.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:17.816Z,1520500757.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:18.226Z,1520500758.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:18.620Z,1520500758.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:19.020Z,1520500759.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:19.418Z,1520500759.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:19.817Z,1520500759.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:20.222Z,1520500760.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:20.620Z,1520500760.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:21.021Z,1520500761.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:21.421Z,1520500761.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:21.820Z,1520500761.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:22.224Z,1520500762.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:22.617Z,1520500762.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:23.018Z,1520500763.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:23.419Z,1520500763.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:23.817Z,1520500763.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:24.226Z,1520500764.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:24.619Z,1520500764.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:25.020Z,1520500765.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:25.419Z,1520500765.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:25.813Z,1520500765.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:26.226Z,1520500766.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:26.618Z,1520500766.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:27.020Z,1520500767.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:27.425Z,1520500767.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:27.826Z,1520500767.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:28.208Z,1520500768.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:28.614Z,1520500768.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:29.015Z,1520500769.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:29.417Z,1520500769.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:29.817Z,1520500769.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:30.220Z,1520500770.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:30.624Z,1520500770.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:31.021Z,1520500771.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:31.499Z,1520500771.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:31.817Z,1520500771.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:32.218Z,1520500772.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:32.614Z,1520500772.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:33.023Z,1520500773.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:33.420Z,1520500773.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:33.823Z,1520500773.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:34.270Z,1520500774.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:34.617Z,1520500774.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:35.017Z,1520500775.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:35.425Z,1520500775.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:35.825Z,1520500775.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:36.226Z,1520500776.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:36.629Z,1520500776.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:37.031Z,1520500777.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:37.425Z,1520500777.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:37.804Z,1520500777.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:38.226Z,1520500778.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:38.609Z,1520500778.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:39.029Z,1520500779.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:39.442Z,1520500779.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:39.837Z,1520500779.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:40.214Z,1520500780.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:40.634Z,1520500780.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:41.009Z,1520500781.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:41.408Z,1520500781.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:41.818Z,1520500781.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:42.239Z,1520500782.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:42.636Z,1520500782.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:43.039Z,1520500783.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:43.411Z,1520500783.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:43.806Z,1520500783.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:44.218Z,1520500784.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:44.614Z,1520500784.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:45.013Z,1520500785.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:45.437Z,1520500785.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:45.838Z,1520500785.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:46.214Z,1520500786.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:46.613Z,1520500786.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:47.018Z,1520500787.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:47.415Z,1520500787.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:47.814Z,1520500787.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:48.220Z,1520500788.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:48.616Z,1520500788.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:49.037Z,1520500789.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:49.420Z,1520500789.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:49.809Z,1520500789.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:50.221Z,1520500790.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:50.621Z,1520500790.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:50.971Z,1520500790.971 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T09:19:50.971Z,1520500790.971 [NAL9602] Data Fault, FailCount= 5
2018-03-08T09:19:50.971Z,1520500790.971 [NAL9602](ERROR): Data Fault
2018-03-08T09:19:51.026Z,1520500791.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:51.043Z,1520500791.043 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T09:19:51.044Z,1520500791.044 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-08T09:19:51.374Z,1520500791.374 [NAL9602](INFO): Powering down
2018-03-08T09:19:51.423Z,1520500791.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:51.435Z,1520500791.435 [CBIT](INFO): Critical error at 20180308T091951
2018-03-08T09:19:51.812Z,1520500791.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:54.923Z,1520500794.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:55.058Z,1520500795.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:55.409Z,1520500795.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:55.792Z,1520500795.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:56.191Z,1520500796.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:56.593Z,1520500796.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:56.993Z,1520500796.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:57.393Z,1520500797.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:57.791Z,1520500797.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:58.191Z,1520500798.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:58.593Z,1520500798.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:58.993Z,1520500798.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:59.391Z,1520500799.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:19:59.797Z,1520500799.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:00.202Z,1520500800.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:00.593Z,1520500800.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:00.999Z,1520500800.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:01.395Z,1520500801.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:01.795Z,1520500801.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:02.191Z,1520500802.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:02.595Z,1520500802.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:02.994Z,1520500802.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:03.389Z,1520500803.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:03.793Z,1520500803.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:04.192Z,1520500804.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:04.595Z,1520500804.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:04.994Z,1520500804.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:05.394Z,1520500805.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:05.786Z,1520500805.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:06.195Z,1520500806.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:06.589Z,1520500806.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:06.985Z,1520500806.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:07.401Z,1520500807.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:07.788Z,1520500807.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:08.186Z,1520500808.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:08.593Z,1520500808.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:08.994Z,1520500808.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:09.394Z,1520500809.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:09.794Z,1520500809.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:10.194Z,1520500810.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:10.597Z,1520500810.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:10.994Z,1520500810.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:11.394Z,1520500811.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:11.789Z,1520500811.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:12.214Z,1520500812.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:12.595Z,1520500812.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:12.990Z,1520500812.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:13.399Z,1520500813.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:13.795Z,1520500813.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:14.189Z,1520500814.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:14.591Z,1520500814.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:14.996Z,1520500814.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:15.396Z,1520500815.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:15.794Z,1520500815.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:16.190Z,1520500816.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:16.597Z,1520500816.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:16.997Z,1520500816.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:17.396Z,1520500817.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:17.791Z,1520500817.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:18.198Z,1520500818.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:18.590Z,1520500818.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:18.994Z,1520500818.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:19.394Z,1520500819.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:19.798Z,1520500819.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:20.198Z,1520500820.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:20.601Z,1520500820.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:20.991Z,1520500820.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:21.396Z,1520500821.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:21.801Z,1520500821.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:22.198Z,1520500822.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:22.596Z,1520500822.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:23.002Z,1520500823.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:23.391Z,1520500823.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:23.797Z,1520500823.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:24.201Z,1520500824.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:24.594Z,1520500824.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:24.998Z,1520500824.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:25.398Z,1520500825.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:25.799Z,1520500825.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:26.186Z,1520500826.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:26.598Z,1520500826.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:27.005Z,1520500827.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:27.398Z,1520500827.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:27.798Z,1520500827.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:28.206Z,1520500828.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:28.601Z,1520500828.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:29.008Z,1520500829.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:29.385Z,1520500829.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:29.783Z,1520500829.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:30.212Z,1520500830.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:30.589Z,1520500830.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:30.980Z,1520500830.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:31.409Z,1520500831.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:31.793Z,1520500831.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:32.191Z,1520500832.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:32.591Z,1520500832.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:32.992Z,1520500832.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:33.393Z,1520500833.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:33.793Z,1520500833.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:34.194Z,1520500834.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:34.595Z,1520500834.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:34.994Z,1520500834.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:35.393Z,1520500835.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:35.787Z,1520500835.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:36.199Z,1520500836.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:36.591Z,1520500836.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:36.987Z,1520500836.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:37.395Z,1520500837.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:37.794Z,1520500837.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:38.190Z,1520500838.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:38.598Z,1520500838.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:38.993Z,1520500838.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:39.393Z,1520500839.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:39.795Z,1520500839.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:40.195Z,1520500840.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:40.591Z,1520500840.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:40.994Z,1520500840.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:41.395Z,1520500841.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:41.790Z,1520500841.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:42.195Z,1520500842.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:42.594Z,1520500842.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:42.990Z,1520500842.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:43.394Z,1520500843.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:43.794Z,1520500843.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:44.187Z,1520500844.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:44.593Z,1520500844.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:44.987Z,1520500844.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:45.394Z,1520500845.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:45.790Z,1520500845.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:46.194Z,1520500846.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:46.589Z,1520500846.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:46.993Z,1520500846.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:47.391Z,1520500847.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:47.790Z,1520500847.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:48.193Z,1520500848.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:48.593Z,1520500848.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:48.990Z,1520500848.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:49.393Z,1520500849.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:49.794Z,1520500849.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:50.190Z,1520500850.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:50.597Z,1520500850.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:50.994Z,1520500850.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:51.394Z,1520500851.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:51.794Z,1520500851.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:52.202Z,1520500852.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:55.290Z,1520500855.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:55.422Z,1520500855.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:55.774Z,1520500855.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:56.172Z,1520500856.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:56.574Z,1520500856.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:56.974Z,1520500856.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:57.371Z,1520500857.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:57.753Z,1520500857.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:58.161Z,1520500858.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:58.562Z,1520500858.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:58.953Z,1520500858.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:59.362Z,1520500859.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:20:59.757Z,1520500859.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:00.154Z,1520500860.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:00.558Z,1520500860.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:00.961Z,1520500860.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:01.355Z,1520500861.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:01.762Z,1520500861.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:02.161Z,1520500862.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:02.561Z,1520500862.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:02.960Z,1520500862.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:03.389Z,1520500863.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:03.755Z,1520500863.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:04.159Z,1520500864.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:04.562Z,1520500864.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:04.956Z,1520500864.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:05.363Z,1520500865.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:05.763Z,1520500865.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:06.155Z,1520500866.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:06.564Z,1520500866.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:06.958Z,1520500866.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:07.358Z,1520500867.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:07.760Z,1520500867.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:08.162Z,1520500868.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:08.559Z,1520500868.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:08.959Z,1520500868.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:09.374Z,1520500869.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:09.747Z,1520500869.747 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:09.747Z,1520500869.747 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33
2018-03-08T09:21:09.747Z,1520500869.747 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T09:21:09.757Z,1520500869.757 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:09.757Z,1520500869.757 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33
2018-03-08T09:21:09.758Z,1520500869.758 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T09:21:09.759Z,1520500869.759 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:09.759Z,1520500869.759 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 33
2018-03-08T09:21:09.759Z,1520500869.759 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T09:21:09.788Z,1520500869.788 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T09:21:09.788Z,1520500869.788 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T09:21:09.793Z,1520500869.793 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T09:21:10.184Z,1520500870.184 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T09:21:10.189Z,1520500870.189 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33
2018-03-08T09:21:10.189Z,1520500870.189 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T09:21:10.189Z,1520500870.189 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33
2018-03-08T09:21:10.190Z,1520500870.190 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T09:21:10.190Z,1520500870.190 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 33
2018-03-08T09:21:10.578Z,1520500870.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T09:21:10.579Z,1520500870.579 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:21:10.579Z,1520500870.579 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:21:10.579Z,1520500870.579 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T09:21:10.580Z,1520500870.580 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:21:10.580Z,1520500870.580 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:21:10.581Z,1520500870.581 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T09:21:10.581Z,1520500870.581 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:21:10.582Z,1520500870.582 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:21:10.951Z,1520500870.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T09:21:10.952Z,1520500870.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:11.381Z,1520500871.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T09:21:11.382Z,1520500871.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:11.760Z,1520500871.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T09:21:11.761Z,1520500871.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:12.153Z,1520500872.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T09:21:12.154Z,1520500872.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:12.561Z,1520500872.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T09:21:12.562Z,1520500872.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:12.961Z,1520500872.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T09:21:12.962Z,1520500872.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:13.354Z,1520500873.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T09:21:13.355Z,1520500873.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:13.761Z,1520500873.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T09:21:13.762Z,1520500873.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:14.162Z,1520500874.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T09:21:14.162Z,1520500874.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:14.562Z,1520500874.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T09:21:14.562Z,1520500874.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:14.963Z,1520500874.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T09:21:14.963Z,1520500874.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:15.358Z,1520500875.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T09:21:15.359Z,1520500875.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:15.757Z,1520500875.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T09:21:15.758Z,1520500875.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:16.159Z,1520500876.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T09:21:16.160Z,1520500876.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:16.562Z,1520500876.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T09:21:16.563Z,1520500876.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:16.966Z,1520500876.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T09:21:16.967Z,1520500876.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:17.360Z,1520500877.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T09:21:17.361Z,1520500877.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:17.762Z,1520500877.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T09:21:17.763Z,1520500877.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:18.159Z,1520500878.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T09:21:18.159Z,1520500878.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:18.562Z,1520500878.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T09:21:18.563Z,1520500878.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:18.961Z,1520500878.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T09:21:18.962Z,1520500878.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:19.358Z,1520500879.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T09:21:19.359Z,1520500879.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:19.762Z,1520500879.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T09:21:19.762Z,1520500879.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:20.155Z,1520500880.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T09:21:20.156Z,1520500880.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:20.567Z,1520500880.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T09:21:20.568Z,1520500880.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:20.960Z,1520500880.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T09:21:20.961Z,1520500880.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:21.362Z,1520500881.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T09:21:21.363Z,1520500881.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:21.771Z,1520500881.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T09:21:21.772Z,1520500881.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:22.171Z,1520500882.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T09:21:22.172Z,1520500882.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:22.572Z,1520500882.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T09:21:22.573Z,1520500882.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:22.946Z,1520500882.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T09:21:22.947Z,1520500882.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:23.378Z,1520500883.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T09:21:23.379Z,1520500883.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:23.779Z,1520500883.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T09:21:23.780Z,1520500883.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:24.146Z,1520500884.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T09:21:24.147Z,1520500884.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:24.552Z,1520500884.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T09:21:24.553Z,1520500884.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:24.952Z,1520500884.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T09:21:24.953Z,1520500884.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:25.354Z,1520500885.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T09:21:25.355Z,1520500885.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:25.760Z,1520500885.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T09:21:25.761Z,1520500885.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:26.153Z,1520500886.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T09:21:26.154Z,1520500886.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:26.559Z,1520500886.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T09:21:26.560Z,1520500886.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:26.959Z,1520500886.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T09:21:26.960Z,1520500886.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:27.362Z,1520500887.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T09:21:27.363Z,1520500887.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:27.753Z,1520500887.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T09:21:27.754Z,1520500887.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:28.161Z,1520500888.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T09:21:28.162Z,1520500888.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:28.561Z,1520500888.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T09:21:28.562Z,1520500888.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:28.953Z,1520500888.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T09:21:28.954Z,1520500888.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:29.362Z,1520500889.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T09:21:29.363Z,1520500889.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:29.761Z,1520500889.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:30.156Z,1520500890.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:30.561Z,1520500890.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:30.961Z,1520500890.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:31.355Z,1520500891.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:31.761Z,1520500891.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:32.162Z,1520500892.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:32.556Z,1520500892.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:32.959Z,1520500892.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:33.361Z,1520500893.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:33.758Z,1520500893.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:34.166Z,1520500894.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:34.560Z,1520500894.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:34.957Z,1520500894.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:35.359Z,1520500895.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:35.761Z,1520500895.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:36.158Z,1520500896.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:36.559Z,1520500896.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:36.963Z,1520500896.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:37.358Z,1520500897.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:37.766Z,1520500897.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:38.161Z,1520500898.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:38.562Z,1520500898.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:38.962Z,1520500898.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:39.362Z,1520500899.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:39.754Z,1520500899.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:40.166Z,1520500900.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:40.575Z,1520500900.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:40.954Z,1520500900.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:41.366Z,1520500901.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:41.410Z,1520500901.410 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T09:21:41.763Z,1520500901.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:42.157Z,1520500902.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:42.566Z,1520500902.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:42.963Z,1520500902.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:43.357Z,1520500903.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:43.766Z,1520500903.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:44.162Z,1520500904.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:44.563Z,1520500904.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:44.960Z,1520500904.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:45.364Z,1520500905.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:45.763Z,1520500905.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:46.159Z,1520500906.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:46.567Z,1520500906.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:46.966Z,1520500906.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:47.366Z,1520500907.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:47.771Z,1520500907.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:48.166Z,1520500908.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:48.561Z,1520500908.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:48.967Z,1520500908.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:49.367Z,1520500909.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:49.760Z,1520500909.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:50.170Z,1520500910.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:50.565Z,1520500910.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:50.965Z,1520500910.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:50.978Z,1520500910.978 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T09:21:50.978Z,1520500910.978 [NAL9602] No Fault, FailCount= 5
2018-03-08T09:21:51.322Z,1520500911.322 [NAL9602](INFO): Powering up NAL9602
2018-03-08T09:21:51.371Z,1520500911.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:51.762Z,1520500911.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:52.163Z,1520500912.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:52.573Z,1520500912.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:55.657Z,1520500915.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:55.799Z,1520500915.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:56.125Z,1520500916.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:56.525Z,1520500916.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:56.923Z,1520500916.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:57.323Z,1520500917.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:57.758Z,1520500917.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:58.122Z,1520500918.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:58.525Z,1520500918.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:58.922Z,1520500918.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:59.321Z,1520500919.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:21:59.725Z,1520500919.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:00.121Z,1520500920.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:00.526Z,1520500920.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:00.926Z,1520500920.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:01.325Z,1520500921.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:01.722Z,1520500921.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:02.131Z,1520500922.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:02.483Z,1520500922.483 [NAL9602](INFO): NAL9602 initialized
2018-03-08T09:22:02.527Z,1520500922.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:02.926Z,1520500922.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:03.355Z,1520500923.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:03.729Z,1520500923.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:04.153Z,1520500924.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:04.531Z,1520500924.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:04.926Z,1520500924.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:05.326Z,1520500925.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:05.722Z,1520500925.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:06.157Z,1520500926.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:06.553Z,1520500926.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:06.953Z,1520500926.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:07.323Z,1520500927.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:07.726Z,1520500927.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:08.155Z,1520500928.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:08.555Z,1520500928.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:08.932Z,1520500928.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:09.323Z,1520500929.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:09.722Z,1520500929.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:10.154Z,1520500930.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:10.554Z,1520500930.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:10.955Z,1520500930.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:11.327Z,1520500931.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:11.722Z,1520500931.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:12.155Z,1520500932.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:12.528Z,1520500932.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:12.956Z,1520500932.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:13.324Z,1520500933.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:13.724Z,1520500933.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:14.128Z,1520500934.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:14.528Z,1520500934.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:14.926Z,1520500934.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:15.327Z,1520500935.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:15.731Z,1520500935.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:16.132Z,1520500936.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:16.540Z,1520500936.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:16.957Z,1520500936.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:17.328Z,1520500937.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:17.729Z,1520500937.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:18.134Z,1520500938.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:18.537Z,1520500938.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:18.931Z,1520500938.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:19.335Z,1520500939.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:19.725Z,1520500939.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:20.136Z,1520500940.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:20.532Z,1520500940.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:20.931Z,1520500940.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:21.327Z,1520500941.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:21.726Z,1520500941.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:22.131Z,1520500942.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:22.537Z,1520500942.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:22.935Z,1520500942.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:23.326Z,1520500943.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:23.731Z,1520500943.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:24.134Z,1520500944.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:24.537Z,1520500944.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:24.939Z,1520500944.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:25.330Z,1520500945.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:25.729Z,1520500945.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:26.137Z,1520500946.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:26.546Z,1520500946.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:26.940Z,1520500946.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:27.327Z,1520500947.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:27.732Z,1520500947.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:28.146Z,1520500948.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:28.546Z,1520500948.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:28.933Z,1520500948.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:29.338Z,1520500949.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:29.729Z,1520500949.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:30.140Z,1520500950.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:30.544Z,1520500950.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:30.950Z,1520500950.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:31.327Z,1520500951.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:31.734Z,1520500951.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:32.137Z,1520500952.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:32.551Z,1520500952.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:32.940Z,1520500952.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:33.334Z,1520500953.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:33.727Z,1520500953.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:34.142Z,1520500954.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:34.547Z,1520500954.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:34.947Z,1520500954.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:35.338Z,1520500955.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:35.737Z,1520500955.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:36.141Z,1520500956.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:36.602Z,1520500956.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:36.942Z,1520500956.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:37.340Z,1520500957.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:37.722Z,1520500957.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:38.125Z,1520500958.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:38.545Z,1520500958.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:38.946Z,1520500958.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:39.354Z,1520500959.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:39.719Z,1520500959.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:40.125Z,1520500960.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:40.525Z,1520500960.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:40.925Z,1520500960.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:41.347Z,1520500961.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:41.748Z,1520500961.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:42.124Z,1520500962.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:42.526Z,1520500962.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:42.925Z,1520500962.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:43.322Z,1520500963.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:43.724Z,1520500963.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:44.151Z,1520500964.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:44.552Z,1520500964.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:44.932Z,1520500964.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:45.326Z,1520500965.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:45.729Z,1520500965.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:46.154Z,1520500966.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:46.554Z,1520500966.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:46.925Z,1520500966.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:47.327Z,1520500967.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:47.724Z,1520500967.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:48.129Z,1520500968.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:48.536Z,1520500968.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:48.935Z,1520500968.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:49.318Z,1520500969.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:49.735Z,1520500969.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:50.130Z,1520500970.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:50.561Z,1520500970.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:50.938Z,1520500970.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:51.339Z,1520500971.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:51.735Z,1520500971.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:52.129Z,1520500972.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:52.527Z,1520500972.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:52.925Z,1520500972.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:53.331Z,1520500973.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:56.431Z,1520500976.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:56.578Z,1520500976.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:56.931Z,1520500976.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:57.326Z,1520500977.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:57.727Z,1520500977.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:58.133Z,1520500978.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:58.536Z,1520500978.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:58.931Z,1520500978.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:59.325Z,1520500979.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:22:59.731Z,1520500979.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:00.139Z,1520500980.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:00.539Z,1520500980.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:00.939Z,1520500980.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:01.319Z,1520500981.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:01.726Z,1520500981.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:02.129Z,1520500982.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:02.534Z,1520500982.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:02.937Z,1520500982.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:03.331Z,1520500983.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:03.730Z,1520500983.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:04.130Z,1520500984.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:04.529Z,1520500984.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:04.922Z,1520500984.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:05.361Z,1520500985.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:05.730Z,1520500985.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:06.133Z,1520500986.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:06.526Z,1520500986.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:06.930Z,1520500986.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:07.330Z,1520500987.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:07.726Z,1520500987.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:08.133Z,1520500988.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:08.538Z,1520500988.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:08.934Z,1520500988.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:09.326Z,1520500989.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:09.722Z,1520500989.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:10.132Z,1520500990.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:10.537Z,1520500990.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:10.931Z,1520500990.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:11.326Z,1520500991.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:11.729Z,1520500991.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:12.143Z,1520500992.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:12.539Z,1520500992.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:12.940Z,1520500992.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:13.327Z,1520500993.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:13.726Z,1520500993.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:14.137Z,1520500994.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:14.539Z,1520500994.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:14.938Z,1520500994.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:15.330Z,1520500995.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:15.729Z,1520500995.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:16.136Z,1520500996.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:16.539Z,1520500996.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:16.937Z,1520500996.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:17.328Z,1520500997.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:17.726Z,1520500997.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:18.136Z,1520500998.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:18.540Z,1520500998.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:18.936Z,1520500998.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:19.328Z,1520500999.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:19.732Z,1520500999.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:20.139Z,1520501000.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:20.551Z,1520501000.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:20.936Z,1520501000.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:21.334Z,1520501001.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:21.770Z,1520501001.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:22.141Z,1520501002.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:22.541Z,1520501002.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:22.938Z,1520501002.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:23.333Z,1520501003.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:23.734Z,1520501003.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:24.137Z,1520501004.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:24.551Z,1520501004.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:24.941Z,1520501004.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:25.324Z,1520501005.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:25.737Z,1520501005.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:26.146Z,1520501006.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:26.551Z,1520501006.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:26.940Z,1520501006.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:27.335Z,1520501007.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:27.715Z,1520501007.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:28.143Z,1520501008.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:28.551Z,1520501008.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:28.944Z,1520501008.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:29.327Z,1520501009.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:29.730Z,1520501009.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:30.124Z,1520501010.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:30.550Z,1520501010.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:30.954Z,1520501010.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:31.320Z,1520501011.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:31.730Z,1520501011.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:32.153Z,1520501012.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:32.560Z,1520501012.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:32.928Z,1520501012.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:33.335Z,1520501013.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:33.723Z,1520501013.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:34.130Z,1520501014.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:34.533Z,1520501014.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:34.937Z,1520501014.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:35.332Z,1520501015.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:35.730Z,1520501015.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:36.127Z,1520501016.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:36.526Z,1520501016.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:36.933Z,1520501016.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:37.334Z,1520501017.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:37.737Z,1520501017.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:38.134Z,1520501018.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:38.530Z,1520501018.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:38.927Z,1520501018.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:39.329Z,1520501019.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:39.723Z,1520501019.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:40.132Z,1520501020.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:40.537Z,1520501020.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:40.939Z,1520501020.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:41.330Z,1520501021.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:41.731Z,1520501021.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:42.131Z,1520501022.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:42.537Z,1520501022.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:42.933Z,1520501022.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:43.335Z,1520501023.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:43.730Z,1520501023.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:44.134Z,1520501024.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:44.537Z,1520501024.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:44.937Z,1520501024.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:45.327Z,1520501025.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:45.728Z,1520501025.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:46.139Z,1520501026.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:46.541Z,1520501026.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:46.939Z,1520501026.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:47.328Z,1520501027.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:47.723Z,1520501027.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:48.133Z,1520501028.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:48.540Z,1520501028.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:48.939Z,1520501028.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:49.330Z,1520501029.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:49.725Z,1520501029.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:50.137Z,1520501030.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:50.547Z,1520501030.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:50.946Z,1520501030.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:51.333Z,1520501031.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:51.739Z,1520501031.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:51.742Z,1520501031.742 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T09:23:51.742Z,1520501031.742 [Default:CheckIn:C.Wait] Stopped
2018-03-08T09:23:51.742Z,1520501031.742 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T09:23:51.742Z,1520501031.742 [Default:CheckIn:D] Running Loop=1
2018-03-08T09:23:52.137Z,1520501032.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:52.140Z,1520501032.140 [Default:CheckIn:D] Stopped
2018-03-08T09:23:52.140Z,1520501032.140 [Default:CheckIn:E] Running Loop=1
2018-03-08T09:23:52.536Z,1520501032.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:52.539Z,1520501032.539 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 98.122241 min 
2018-03-08T09:23:52.540Z,1520501032.540 [Default:CheckIn:E] Stopped
2018-03-08T09:23:52.540Z,1520501032.540 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T09:23:52.540Z,1520501032.540 [Default:CheckIn] Stopped
2018-03-08T09:23:52.540Z,1520501032.540 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T09:23:52.540Z,1520501032.540 [Default:CheckIn](INFO): Running loop #10
2018-03-08T09:23:52.541Z,1520501032.541 [Default:CheckIn] Running Loop=10
2018-03-08T09:23:52.541Z,1520501032.541 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T09:23:52.541Z,1520501032.541 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T09:23:52.937Z,1520501032.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:53.329Z,1520501033.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:56.440Z,1520501036.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:56.579Z,1520501036.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:56.928Z,1520501036.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:57.326Z,1520501037.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:57.726Z,1520501037.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:58.107Z,1520501038.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:58.505Z,1520501038.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:58.902Z,1520501038.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:59.328Z,1520501039.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:23:59.732Z,1520501039.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:00.132Z,1520501040.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:00.531Z,1520501040.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:00.903Z,1520501040.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:01.310Z,1520501041.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:01.710Z,1520501041.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:02.109Z,1520501042.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:02.537Z,1520501042.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:02.932Z,1520501042.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:03.335Z,1520501043.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:03.706Z,1520501043.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:04.114Z,1520501044.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:04.502Z,1520501044.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:04.907Z,1520501044.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:05.336Z,1520501045.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:05.734Z,1520501045.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:06.136Z,1520501046.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:06.535Z,1520501046.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:06.906Z,1520501046.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:07.314Z,1520501047.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:07.707Z,1520501047.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:08.106Z,1520501048.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:08.520Z,1520501048.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:08.916Z,1520501048.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:09.324Z,1520501049.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:09.708Z,1520501049.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:10.110Z,1520501050.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:10.511Z,1520501050.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:10.911Z,1520501050.911 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:10.911Z,1520501050.911 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34
2018-03-08T09:24:10.911Z,1520501050.911 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T09:24:10.913Z,1520501050.913 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:10.913Z,1520501050.913 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34
2018-03-08T09:24:10.913Z,1520501050.913 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T09:24:10.915Z,1520501050.915 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:10.915Z,1520501050.915 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 34
2018-03-08T09:24:10.915Z,1520501050.915 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T09:24:10.939Z,1520501050.939 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T09:24:10.939Z,1520501050.939 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T09:24:10.939Z,1520501050.939 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T09:24:11.345Z,1520501051.345 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T09:24:11.345Z,1520501051.345 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34
2018-03-08T09:24:11.346Z,1520501051.346 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T09:24:11.346Z,1520501051.346 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34
2018-03-08T09:24:11.346Z,1520501051.346 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T09:24:11.346Z,1520501051.346 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 34
2018-03-08T09:24:11.719Z,1520501051.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T09:24:11.720Z,1520501051.720 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:24:11.720Z,1520501051.720 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:24:11.721Z,1520501051.721 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T09:24:11.721Z,1520501051.721 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:24:11.721Z,1520501051.721 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:24:11.722Z,1520501051.722 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T09:24:11.722Z,1520501051.722 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:24:11.722Z,1520501051.722 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:24:12.123Z,1520501052.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T09:24:12.124Z,1520501052.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:12.513Z,1520501052.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T09:24:12.514Z,1520501052.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:12.914Z,1520501052.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T09:24:12.915Z,1520501052.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:13.318Z,1520501053.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T09:24:13.319Z,1520501053.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:13.712Z,1520501053.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T09:24:13.713Z,1520501053.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:14.113Z,1520501054.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T09:24:14.114Z,1520501054.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:14.523Z,1520501054.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T09:24:14.524Z,1520501054.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:14.926Z,1520501054.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T09:24:14.927Z,1520501054.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:15.326Z,1520501055.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T09:24:15.327Z,1520501055.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:15.719Z,1520501055.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T09:24:15.720Z,1520501055.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:16.117Z,1520501056.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T09:24:16.118Z,1520501056.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:16.513Z,1520501056.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T09:24:16.514Z,1520501056.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:16.914Z,1520501056.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T09:24:16.915Z,1520501056.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:17.327Z,1520501057.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T09:24:17.328Z,1520501057.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:17.728Z,1520501057.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T09:24:17.729Z,1520501057.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:18.123Z,1520501058.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T09:24:18.124Z,1520501058.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:18.515Z,1520501058.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T09:24:18.516Z,1520501058.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:18.913Z,1520501058.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T09:24:18.914Z,1520501058.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:19.317Z,1520501059.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T09:24:19.317Z,1520501059.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:19.716Z,1520501059.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T09:24:19.717Z,1520501059.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:20.113Z,1520501060.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T09:24:20.114Z,1520501060.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:20.525Z,1520501060.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T09:24:20.526Z,1520501060.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:20.925Z,1520501060.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T09:24:20.926Z,1520501060.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:21.334Z,1520501061.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T09:24:21.335Z,1520501061.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:21.715Z,1520501061.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T09:24:21.717Z,1520501061.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:22.115Z,1520501062.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T09:24:22.116Z,1520501062.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:22.518Z,1520501062.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T09:24:22.519Z,1520501062.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:22.907Z,1520501062.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T09:24:22.908Z,1520501062.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:23.331Z,1520501063.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T09:24:23.332Z,1520501063.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:23.723Z,1520501063.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T09:24:23.724Z,1520501063.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:24.130Z,1520501064.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T09:24:24.131Z,1520501064.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:24.520Z,1520501064.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T09:24:24.521Z,1520501064.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:24.923Z,1520501064.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T09:24:24.924Z,1520501064.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:25.299Z,1520501065.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T09:24:25.300Z,1520501065.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:25.702Z,1520501065.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T09:24:25.703Z,1520501065.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:26.101Z,1520501066.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T09:24:26.102Z,1520501066.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:26.526Z,1520501066.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T09:24:26.527Z,1520501066.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:26.928Z,1520501066.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T09:24:26.929Z,1520501066.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:27.328Z,1520501067.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T09:24:27.329Z,1520501067.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:27.706Z,1520501067.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T09:24:27.707Z,1520501067.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:28.106Z,1520501068.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T09:24:28.107Z,1520501068.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:28.506Z,1520501068.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T09:24:28.506Z,1520501068.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:28.902Z,1520501068.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T09:24:28.903Z,1520501068.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:29.335Z,1520501069.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T09:24:29.337Z,1520501069.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:29.738Z,1520501069.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T09:24:29.739Z,1520501069.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:30.116Z,1520501070.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T09:24:30.133Z,1520501070.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:30.509Z,1520501070.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T09:24:30.510Z,1520501070.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:30.910Z,1520501070.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T09:24:30.911Z,1520501070.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:31.303Z,1520501071.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:31.711Z,1520501071.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:32.110Z,1520501072.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:32.512Z,1520501072.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:32.940Z,1520501072.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:33.340Z,1520501073.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:33.735Z,1520501073.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:34.109Z,1520501074.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:34.511Z,1520501074.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:34.903Z,1520501074.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:35.339Z,1520501075.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:35.720Z,1520501075.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:36.108Z,1520501076.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:36.509Z,1520501076.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:36.908Z,1520501076.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:37.319Z,1520501077.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:37.714Z,1520501077.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:38.114Z,1520501078.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:38.519Z,1520501078.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:38.920Z,1520501078.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:39.319Z,1520501079.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:39.718Z,1520501079.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:40.118Z,1520501080.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:40.515Z,1520501080.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:40.907Z,1520501080.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:41.319Z,1520501081.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:41.718Z,1520501081.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:42.122Z,1520501082.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:42.515Z,1520501082.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:42.914Z,1520501082.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:43.308Z,1520501083.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:43.711Z,1520501083.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:44.108Z,1520501084.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:44.522Z,1520501084.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:44.920Z,1520501084.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:45.319Z,1520501085.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:45.718Z,1520501085.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:46.118Z,1520501086.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:46.514Z,1520501086.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:46.907Z,1520501086.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:47.319Z,1520501087.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:47.718Z,1520501087.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:48.119Z,1520501088.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:48.518Z,1520501088.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:48.913Z,1520501088.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:49.307Z,1520501089.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:49.712Z,1520501089.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:50.116Z,1520501090.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:50.519Z,1520501090.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:50.919Z,1520501090.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:51.319Z,1520501091.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:51.714Z,1520501091.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:52.111Z,1520501092.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:52.518Z,1520501092.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:52.916Z,1520501092.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:53.319Z,1520501093.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:53.720Z,1520501093.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:56.815Z,1520501096.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:56.958Z,1520501096.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:57.298Z,1520501097.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:57.680Z,1520501097.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:58.079Z,1520501098.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:58.504Z,1520501098.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:58.913Z,1520501098.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:59.307Z,1520501099.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:24:59.707Z,1520501099.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:00.111Z,1520501100.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:00.487Z,1520501100.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:00.891Z,1520501100.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:01.318Z,1520501101.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:01.689Z,1520501101.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:02.096Z,1520501102.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:02.486Z,1520501102.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:02.883Z,1520501102.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:03.290Z,1520501103.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:03.687Z,1520501103.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:04.083Z,1520501104.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:04.495Z,1520501104.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:04.899Z,1520501104.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:05.287Z,1520501105.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:05.691Z,1520501105.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:06.089Z,1520501106.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:06.490Z,1520501106.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:06.885Z,1520501106.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:07.292Z,1520501107.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:07.696Z,1520501107.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:08.093Z,1520501108.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:08.486Z,1520501108.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:08.884Z,1520501108.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:09.290Z,1520501109.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:09.690Z,1520501109.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:10.087Z,1520501110.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:10.500Z,1520501110.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:10.906Z,1520501110.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:11.298Z,1520501111.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:11.693Z,1520501111.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:12.090Z,1520501112.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:12.491Z,1520501112.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:12.893Z,1520501112.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:13.301Z,1520501113.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:13.703Z,1520501113.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:14.101Z,1520501114.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:14.489Z,1520501114.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:14.879Z,1520501114.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:15.294Z,1520501115.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:15.693Z,1520501115.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:16.072Z,1520501116.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:16.501Z,1520501116.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:16.902Z,1520501116.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:17.301Z,1520501117.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:17.689Z,1520501117.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:18.078Z,1520501118.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:18.482Z,1520501118.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:18.907Z,1520501118.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:19.313Z,1520501119.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:19.692Z,1520501119.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:20.096Z,1520501120.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:20.486Z,1520501120.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:20.923Z,1520501120.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:21.291Z,1520501121.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:21.691Z,1520501121.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:22.091Z,1520501122.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:22.495Z,1520501122.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:22.895Z,1520501122.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:23.295Z,1520501123.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:23.691Z,1520501123.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:24.081Z,1520501124.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:24.482Z,1520501124.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:24.893Z,1520501124.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:25.296Z,1520501125.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:25.725Z,1520501125.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:26.101Z,1520501126.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:26.531Z,1520501126.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:26.897Z,1520501126.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:27.303Z,1520501127.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:27.702Z,1520501127.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:28.076Z,1520501128.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:28.502Z,1520501128.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:28.910Z,1520501128.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:29.309Z,1520501129.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:29.682Z,1520501129.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:30.081Z,1520501130.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:30.487Z,1520501130.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:30.887Z,1520501130.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:31.307Z,1520501131.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:31.711Z,1520501131.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:32.092Z,1520501132.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:32.487Z,1520501132.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:32.883Z,1520501132.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:33.287Z,1520501133.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:33.683Z,1520501133.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:34.084Z,1520501134.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:34.513Z,1520501134.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:34.895Z,1520501134.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:35.287Z,1520501135.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:35.687Z,1520501135.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:36.086Z,1520501136.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:36.488Z,1520501136.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:36.886Z,1520501136.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:37.317Z,1520501137.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:37.689Z,1520501137.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:38.088Z,1520501138.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:38.486Z,1520501138.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:38.882Z,1520501138.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:39.290Z,1520501139.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:39.686Z,1520501139.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:40.083Z,1520501140.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:40.495Z,1520501140.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:40.898Z,1520501140.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:41.295Z,1520501141.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:41.694Z,1520501141.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:42.086Z,1520501142.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:42.490Z,1520501142.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:42.885Z,1520501142.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:43.295Z,1520501143.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:43.696Z,1520501143.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:44.098Z,1520501144.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:44.490Z,1520501144.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:44.891Z,1520501144.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:45.294Z,1520501145.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:45.684Z,1520501145.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:46.087Z,1520501146.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:46.500Z,1520501146.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:46.904Z,1520501146.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:47.292Z,1520501147.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:47.690Z,1520501147.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:48.089Z,1520501148.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:48.492Z,1520501148.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:48.891Z,1520501148.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:49.296Z,1520501149.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:49.704Z,1520501149.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:50.096Z,1520501150.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:50.488Z,1520501150.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:50.887Z,1520501150.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:51.298Z,1520501151.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:51.693Z,1520501151.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:52.083Z,1520501152.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:52.500Z,1520501152.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:52.910Z,1520501152.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:53.302Z,1520501153.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:53.697Z,1520501153.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:54.097Z,1520501154.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:57.195Z,1520501157.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:57.310Z,1520501157.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:57.701Z,1520501157.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:58.102Z,1520501158.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:58.501Z,1520501158.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:58.879Z,1520501158.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:59.275Z,1520501159.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:25:59.702Z,1520501159.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:00.079Z,1520501160.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:00.507Z,1520501160.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:00.908Z,1520501160.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:01.309Z,1520501161.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:01.679Z,1520501161.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:02.079Z,1520501162.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:02.483Z,1520501162.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:02.887Z,1520501162.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:03.309Z,1520501163.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:03.692Z,1520501163.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:04.088Z,1520501164.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:04.483Z,1520501164.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:04.890Z,1520501164.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:05.286Z,1520501165.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:05.682Z,1520501165.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:06.087Z,1520501166.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:06.489Z,1520501166.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:06.893Z,1520501166.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:07.288Z,1520501167.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:07.687Z,1520501167.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:08.083Z,1520501168.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:08.485Z,1520501168.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:08.886Z,1520501168.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:09.288Z,1520501169.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:09.688Z,1520501169.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:10.089Z,1520501170.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:10.483Z,1520501170.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:10.888Z,1520501170.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:11.285Z,1520501171.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:11.686Z,1520501171.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:12.087Z,1520501172.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:12.490Z,1520501172.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:12.894Z,1520501172.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:13.295Z,1520501173.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:13.687Z,1520501173.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:14.081Z,1520501174.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:14.482Z,1520501174.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:14.881Z,1520501174.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:15.288Z,1520501175.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:15.686Z,1520501175.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:16.090Z,1520501176.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:16.485Z,1520501176.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:16.885Z,1520501176.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:17.285Z,1520501177.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:17.685Z,1520501177.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:18.087Z,1520501178.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:18.489Z,1520501178.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:18.888Z,1520501178.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:19.294Z,1520501179.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:19.686Z,1520501179.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:20.086Z,1520501180.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:20.486Z,1520501180.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:20.885Z,1520501180.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:21.289Z,1520501181.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:21.691Z,1520501181.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:22.089Z,1520501182.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:22.486Z,1520501182.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:22.884Z,1520501182.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:23.290Z,1520501183.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:23.685Z,1520501183.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:24.085Z,1520501184.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:24.489Z,1520501184.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:24.888Z,1520501184.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:25.294Z,1520501185.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:25.685Z,1520501185.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:26.081Z,1520501186.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:26.482Z,1520501186.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:26.885Z,1520501186.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:27.294Z,1520501187.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:27.691Z,1520501187.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:28.089Z,1520501188.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:28.481Z,1520501188.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:28.881Z,1520501188.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:29.286Z,1520501189.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:29.685Z,1520501189.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:30.082Z,1520501190.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:30.487Z,1520501190.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:30.888Z,1520501190.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:31.287Z,1520501191.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:31.685Z,1520501191.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:32.082Z,1520501192.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:32.485Z,1520501192.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:32.885Z,1520501192.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:33.290Z,1520501193.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:33.691Z,1520501193.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:34.089Z,1520501194.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:34.481Z,1520501194.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:34.883Z,1520501194.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:35.285Z,1520501195.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:35.682Z,1520501195.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:36.085Z,1520501196.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:36.489Z,1520501196.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:36.889Z,1520501196.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:37.287Z,1520501197.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:37.684Z,1520501197.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:38.085Z,1520501198.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:38.482Z,1520501198.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:38.886Z,1520501198.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:39.289Z,1520501199.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:39.686Z,1520501199.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:40.088Z,1520501200.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:40.482Z,1520501200.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:40.882Z,1520501200.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:41.283Z,1520501201.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:41.686Z,1520501201.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:41.699Z,1520501201.699 [CBIT](INFO): Clearing failed state for component DropWeight
2018-03-08T09:26:41.699Z,1520501201.699 [DropWeight] No Fault, FailCount= 1
2018-03-08T09:26:42.085Z,1520501202.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:42.489Z,1520501202.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:42.888Z,1520501202.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:43.294Z,1520501203.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:43.685Z,1520501203.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:44.082Z,1520501204.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:44.487Z,1520501204.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:44.886Z,1520501204.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:45.287Z,1520501205.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:45.692Z,1520501205.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:46.089Z,1520501206.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:46.484Z,1520501206.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:46.886Z,1520501206.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:47.287Z,1520501207.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:47.686Z,1520501207.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:48.086Z,1520501208.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:48.489Z,1520501208.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:48.888Z,1520501208.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:49.288Z,1520501209.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:49.690Z,1520501209.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:50.082Z,1520501210.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:50.487Z,1520501210.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:50.878Z,1520501210.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:51.294Z,1520501211.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:51.692Z,1520501211.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:52.091Z,1520501212.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:52.485Z,1520501212.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:52.885Z,1520501212.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:53.280Z,1520501213.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:53.690Z,1520501213.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:54.081Z,1520501214.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:54.489Z,1520501214.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:57.620Z,1520501217.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:57.766Z,1520501217.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:58.134Z,1520501218.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:58.495Z,1520501218.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:58.890Z,1520501218.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:59.293Z,1520501219.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:26:59.704Z,1520501219.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:00.099Z,1520501220.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:00.490Z,1520501220.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:00.890Z,1520501220.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:01.295Z,1520501221.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:01.699Z,1520501221.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:02.093Z,1520501222.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:02.497Z,1520501222.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:02.923Z,1520501222.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:03.299Z,1520501223.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:03.698Z,1520501223.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:04.093Z,1520501224.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:04.491Z,1520501224.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:04.889Z,1520501224.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:05.300Z,1520501225.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:05.699Z,1520501225.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:06.095Z,1520501226.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:06.489Z,1520501226.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:06.890Z,1520501226.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:07.285Z,1520501227.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:07.691Z,1520501227.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:08.090Z,1520501228.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:08.506Z,1520501228.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:08.900Z,1520501228.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:09.306Z,1520501229.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:09.699Z,1520501229.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:10.098Z,1520501230.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:10.496Z,1520501230.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:10.887Z,1520501230.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:11.299Z,1520501231.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:11.699Z,1520501231.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:12.095Z,1520501232.095 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:12.095Z,1520501232.095 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35
2018-03-08T09:27:12.095Z,1520501232.095 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T09:27:12.097Z,1520501232.097 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:12.097Z,1520501232.097 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35
2018-03-08T09:27:12.098Z,1520501232.098 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T09:27:12.099Z,1520501232.099 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:12.099Z,1520501232.099 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 35
2018-03-08T09:27:12.099Z,1520501232.099 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T09:27:12.119Z,1520501232.119 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T09:27:12.120Z,1520501232.120 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T09:27:12.120Z,1520501232.120 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T09:27:12.529Z,1520501232.529 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T09:27:12.529Z,1520501232.529 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35
2018-03-08T09:27:12.529Z,1520501232.529 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T09:27:12.529Z,1520501232.529 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35
2018-03-08T09:27:12.530Z,1520501232.530 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T09:27:12.530Z,1520501232.530 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 35
2018-03-08T09:27:12.892Z,1520501232.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T09:27:12.893Z,1520501232.893 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:27:12.893Z,1520501232.893 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:27:12.894Z,1520501232.894 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T09:27:12.894Z,1520501232.894 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:27:12.894Z,1520501232.894 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:27:12.895Z,1520501232.895 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T09:27:12.895Z,1520501232.895 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:27:12.895Z,1520501232.895 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:27:13.287Z,1520501233.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T09:27:13.288Z,1520501233.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:13.697Z,1520501233.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T09:27:13.698Z,1520501233.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:14.098Z,1520501234.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T09:27:14.099Z,1520501234.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:14.510Z,1520501234.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T09:27:14.511Z,1520501234.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:14.910Z,1520501234.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T09:27:14.911Z,1520501234.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:15.308Z,1520501235.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T09:27:15.309Z,1520501235.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:15.694Z,1520501235.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T09:27:15.695Z,1520501235.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:16.094Z,1520501236.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T09:27:16.095Z,1520501236.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:16.498Z,1520501236.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T09:27:16.499Z,1520501236.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:16.896Z,1520501236.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T09:27:16.897Z,1520501236.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:17.304Z,1520501237.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T09:27:17.305Z,1520501237.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:17.715Z,1520501237.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T09:27:17.716Z,1520501237.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:18.100Z,1520501238.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T09:27:18.101Z,1520501238.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:18.498Z,1520501238.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T09:27:18.499Z,1520501238.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:18.894Z,1520501238.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T09:27:18.895Z,1520501238.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:19.305Z,1520501239.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T09:27:19.306Z,1520501239.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:19.682Z,1520501239.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T09:27:19.683Z,1520501239.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:20.086Z,1520501240.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T09:27:20.087Z,1520501240.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:20.512Z,1520501240.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T09:27:20.513Z,1520501240.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:20.914Z,1520501240.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T09:27:20.915Z,1520501240.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:21.309Z,1520501241.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T09:27:21.310Z,1520501241.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:21.687Z,1520501241.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T09:27:21.688Z,1520501241.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:22.170Z,1520501242.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T09:27:22.171Z,1520501242.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:22.488Z,1520501242.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T09:27:22.489Z,1520501242.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:22.894Z,1520501242.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T09:27:22.895Z,1520501242.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:23.319Z,1520501243.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T09:27:23.320Z,1520501243.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:23.716Z,1520501243.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T09:27:23.717Z,1520501243.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:24.238Z,1520501244.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T09:27:24.238Z,1520501244.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:24.487Z,1520501244.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T09:27:24.487Z,1520501244.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:24.890Z,1520501244.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T09:27:24.891Z,1520501244.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:25.287Z,1520501245.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T09:27:25.288Z,1520501245.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:25.690Z,1520501245.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T09:27:25.691Z,1520501245.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:26.088Z,1520501246.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T09:27:26.089Z,1520501246.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:26.496Z,1520501246.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T09:27:26.497Z,1520501246.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:26.896Z,1520501246.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T09:27:26.897Z,1520501246.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:27.293Z,1520501247.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T09:27:27.294Z,1520501247.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:27.692Z,1520501247.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T09:27:27.693Z,1520501247.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:28.091Z,1520501248.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T09:27:28.092Z,1520501248.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:28.491Z,1520501248.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T09:27:28.492Z,1520501248.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:28.898Z,1520501248.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T09:27:28.899Z,1520501248.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:29.297Z,1520501249.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T09:27:29.298Z,1520501249.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:29.700Z,1520501249.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T09:27:29.701Z,1520501249.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:30.097Z,1520501250.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T09:27:30.098Z,1520501250.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:30.492Z,1520501250.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T09:27:30.493Z,1520501250.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:30.891Z,1520501250.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T09:27:30.892Z,1520501250.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:31.285Z,1520501251.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T09:27:31.286Z,1520501251.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:31.695Z,1520501251.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T09:27:31.696Z,1520501251.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:32.094Z,1520501252.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T09:27:32.095Z,1520501252.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:32.499Z,1520501252.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:32.906Z,1520501252.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:33.299Z,1520501253.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:33.698Z,1520501253.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:34.094Z,1520501254.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:34.495Z,1520501254.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:34.898Z,1520501254.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:35.299Z,1520501255.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:35.699Z,1520501255.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:36.100Z,1520501256.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:36.490Z,1520501256.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:36.890Z,1520501256.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:37.294Z,1520501257.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:37.698Z,1520501257.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:38.094Z,1520501258.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:38.503Z,1520501258.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:38.910Z,1520501258.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:39.304Z,1520501259.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:39.698Z,1520501259.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:40.098Z,1520501260.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:40.497Z,1520501260.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:40.898Z,1520501260.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:41.300Z,1520501261.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:41.703Z,1520501261.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:42.110Z,1520501262.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:42.498Z,1520501262.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:42.894Z,1520501262.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:43.294Z,1520501263.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:43.694Z,1520501263.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:44.090Z,1520501264.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:44.510Z,1520501264.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:44.903Z,1520501264.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:45.303Z,1520501265.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:45.698Z,1520501265.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:46.094Z,1520501266.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:46.501Z,1520501266.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:46.894Z,1520501266.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:47.309Z,1520501267.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:47.707Z,1520501267.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:48.104Z,1520501268.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:48.493Z,1520501268.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:48.894Z,1520501268.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:49.294Z,1520501269.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:49.697Z,1520501269.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:50.094Z,1520501270.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:50.504Z,1520501270.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:50.910Z,1520501270.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:51.305Z,1520501271.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:51.694Z,1520501271.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:52.098Z,1520501272.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:52.489Z,1520501272.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:52.894Z,1520501272.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:53.301Z,1520501273.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:53.706Z,1520501273.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:54.110Z,1520501274.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:54.493Z,1520501274.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:58.051Z,1520501278.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:58.179Z,1520501278.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:58.586Z,1520501278.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:58.966Z,1520501278.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:59.360Z,1520501279.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:27:59.767Z,1520501279.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:00.160Z,1520501280.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:00.555Z,1520501280.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:00.953Z,1520501280.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:01.366Z,1520501281.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:01.760Z,1520501281.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:02.161Z,1520501282.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:02.560Z,1520501282.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:02.953Z,1520501282.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:03.357Z,1520501283.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:03.760Z,1520501283.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:04.167Z,1520501284.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:04.565Z,1520501284.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:04.966Z,1520501284.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:05.357Z,1520501285.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:05.758Z,1520501285.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:06.165Z,1520501286.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:06.570Z,1520501286.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:06.964Z,1520501286.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:07.359Z,1520501287.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:07.761Z,1520501287.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:08.170Z,1520501288.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:08.571Z,1520501288.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:08.974Z,1520501288.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:09.361Z,1520501289.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:09.762Z,1520501289.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:10.171Z,1520501290.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:10.571Z,1520501290.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:10.975Z,1520501290.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:11.361Z,1520501291.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:11.767Z,1520501291.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:12.173Z,1520501292.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:12.579Z,1520501292.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:12.968Z,1520501292.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:13.362Z,1520501293.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:13.753Z,1520501293.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:14.175Z,1520501294.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:14.575Z,1520501294.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:14.974Z,1520501294.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:15.362Z,1520501295.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:15.757Z,1520501295.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:16.177Z,1520501296.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:16.576Z,1520501296.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:16.970Z,1520501296.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:17.362Z,1520501297.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:17.761Z,1520501297.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:18.170Z,1520501298.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:18.572Z,1520501298.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:18.970Z,1520501298.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:19.363Z,1520501299.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:19.760Z,1520501299.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:20.170Z,1520501300.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:20.573Z,1520501300.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:20.963Z,1520501300.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:21.369Z,1520501301.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:21.759Z,1520501301.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:22.171Z,1520501302.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:22.578Z,1520501302.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:22.970Z,1520501302.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:23.361Z,1520501303.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:23.763Z,1520501303.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:24.171Z,1520501304.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:24.579Z,1520501304.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:24.970Z,1520501304.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:25.362Z,1520501305.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:25.765Z,1520501305.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:26.165Z,1520501306.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:26.566Z,1520501306.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:26.975Z,1520501306.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:27.365Z,1520501307.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:27.769Z,1520501307.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:28.174Z,1520501308.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:28.573Z,1520501308.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:28.969Z,1520501308.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:29.373Z,1520501309.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:29.767Z,1520501309.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:30.172Z,1520501310.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:30.583Z,1520501310.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:30.982Z,1520501310.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:31.378Z,1520501311.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:31.751Z,1520501311.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:32.172Z,1520501312.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:32.577Z,1520501312.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:32.976Z,1520501312.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:33.355Z,1520501313.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:33.755Z,1520501313.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:34.178Z,1520501314.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:34.581Z,1520501314.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:34.982Z,1520501314.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:35.352Z,1520501315.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:35.772Z,1520501315.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:36.168Z,1520501316.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:36.561Z,1520501316.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:36.985Z,1520501316.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:37.356Z,1520501317.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:37.756Z,1520501317.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:38.186Z,1520501318.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:38.590Z,1520501318.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:38.985Z,1520501318.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:39.357Z,1520501319.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:39.755Z,1520501319.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:40.161Z,1520501320.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:40.568Z,1520501320.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:40.961Z,1520501320.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:41.360Z,1520501321.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:41.758Z,1520501321.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:42.161Z,1520501322.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:42.561Z,1520501322.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:42.961Z,1520501322.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:43.360Z,1520501323.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:43.756Z,1520501323.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:44.172Z,1520501324.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:44.565Z,1520501324.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:44.970Z,1520501324.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:45.361Z,1520501325.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:45.756Z,1520501325.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:46.166Z,1520501326.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:46.570Z,1520501326.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:46.967Z,1520501326.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:47.360Z,1520501327.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:47.757Z,1520501327.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:48.167Z,1520501328.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:48.571Z,1520501328.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:48.970Z,1520501328.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:49.362Z,1520501329.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:49.755Z,1520501329.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:50.164Z,1520501330.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:50.565Z,1520501330.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:50.960Z,1520501330.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:51.361Z,1520501331.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:51.757Z,1520501331.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:52.163Z,1520501332.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:52.569Z,1520501332.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:52.572Z,1520501332.572 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T09:23:52.5Z
2018-03-08T09:28:52.572Z,1520501332.572 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T09:28:52.572Z,1520501332.572 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T09:28:52.970Z,1520501332.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:53.458Z,1520501333.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:53.763Z,1520501333.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:54.175Z,1520501334.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:57.278Z,1520501337.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:57.434Z,1520501337.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:57.734Z,1520501337.734 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180308T074127/Courier0040.lzma
2018-03-08T09:28:57.784Z,1520501337.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:58.175Z,1520501338.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:58.531Z,1520501338.531 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0040.lzma.bak
2018-03-08T09:28:58.531Z,1520501338.531 [DataOverHttps](INFO): SBD MOMSN=7984509
2018-03-08T09:28:58.591Z,1520501338.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:59.178Z,1520501339.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:28:59.402Z,1520501339.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:02.496Z,1520501342.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:02.634Z,1520501342.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:02.999Z,1520501342.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:03.395Z,1520501343.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:03.795Z,1520501343.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:04.228Z,1520501344.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:04.603Z,1520501344.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:07.701Z,1520501347.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:07.838Z,1520501347.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:08.149Z,1520501348.149 [DataOverHttps](INFO): Sending 138 bytes from file Logs/20180308T074127/Express0041.lzma
2018-03-08T09:29:08.202Z,1520501348.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:08.596Z,1520501348.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:08.947Z,1520501348.947 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0041.lzma.bak
2018-03-08T09:29:08.947Z,1520501348.947 [DataOverHttps](INFO): SBD MOMSN=7984512
2018-03-08T09:29:09.001Z,1520501349.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:10.350Z,1520501350.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:10.357Z,1520501350.357 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T09:29:10.357Z,1520501350.357 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T09:29:10.358Z,1520501350.358 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T09:29:10.494Z,1520501350.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:10.857Z,1520501350.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:13.947Z,1520501353.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:14.067Z,1520501354.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:14.443Z,1520501354.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:14.839Z,1520501354.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:15.237Z,1520501355.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:15.644Z,1520501355.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:16.017Z,1520501356.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:16.417Z,1520501356.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:16.819Z,1520501356.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:17.244Z,1520501357.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:17.641Z,1520501357.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:18.040Z,1520501358.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:18.419Z,1520501358.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:18.825Z,1520501358.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:19.219Z,1520501359.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:19.620Z,1520501359.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:20.013Z,1520501360.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:20.425Z,1520501360.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:20.831Z,1520501360.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:21.223Z,1520501361.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:21.617Z,1520501361.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:22.022Z,1520501362.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:22.419Z,1520501362.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:22.822Z,1520501362.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:23.256Z,1520501363.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:23.622Z,1520501363.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:24.032Z,1520501364.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:24.421Z,1520501364.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:24.815Z,1520501364.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:25.221Z,1520501365.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:25.622Z,1520501365.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:26.016Z,1520501366.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:26.423Z,1520501366.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:26.825Z,1520501366.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:27.225Z,1520501367.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:27.621Z,1520501367.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:28.021Z,1520501368.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:28.425Z,1520501368.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:28.820Z,1520501368.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:29.224Z,1520501369.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:29.628Z,1520501369.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:30.025Z,1520501370.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:30.420Z,1520501370.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:30.816Z,1520501370.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:31.218Z,1520501371.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:31.623Z,1520501371.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:32.017Z,1520501372.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:32.436Z,1520501372.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:32.828Z,1520501372.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:33.228Z,1520501373.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:33.625Z,1520501373.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:34.018Z,1520501374.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:34.422Z,1520501374.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:34.821Z,1520501374.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:35.234Z,1520501375.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:35.634Z,1520501375.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:36.026Z,1520501376.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:36.424Z,1520501376.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:36.817Z,1520501376.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:37.225Z,1520501377.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:37.620Z,1520501377.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:38.024Z,1520501378.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:38.429Z,1520501378.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:38.827Z,1520501378.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:39.223Z,1520501379.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:39.623Z,1520501379.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:40.022Z,1520501380.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:40.418Z,1520501380.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:40.817Z,1520501380.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:41.227Z,1520501381.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:41.628Z,1520501381.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:42.027Z,1520501382.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:42.424Z,1520501382.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:42.816Z,1520501382.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:43.216Z,1520501383.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:43.623Z,1520501383.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:44.025Z,1520501384.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:44.433Z,1520501384.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:44.831Z,1520501384.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:45.228Z,1520501385.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:45.626Z,1520501385.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:46.025Z,1520501386.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:46.419Z,1520501386.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:46.829Z,1520501386.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:47.232Z,1520501387.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:47.631Z,1520501387.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:48.032Z,1520501388.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:48.423Z,1520501388.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:48.818Z,1520501388.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:49.225Z,1520501389.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:49.620Z,1520501389.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:50.019Z,1520501390.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:50.433Z,1520501390.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:50.835Z,1520501390.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:51.232Z,1520501391.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:51.631Z,1520501391.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:52.024Z,1520501392.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:52.423Z,1520501392.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:52.827Z,1520501392.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:53.274Z,1520501393.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:53.636Z,1520501393.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:54.029Z,1520501394.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:54.414Z,1520501394.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:54.810Z,1520501394.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:55.243Z,1520501395.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:55.629Z,1520501395.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:56.034Z,1520501396.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:56.433Z,1520501396.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:56.834Z,1520501396.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:57.238Z,1520501397.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:57.628Z,1520501397.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:58.030Z,1520501398.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:58.430Z,1520501398.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:58.830Z,1520501398.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:59.241Z,1520501399.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:29:59.639Z,1520501399.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:00.036Z,1520501400.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:00.437Z,1520501400.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:00.831Z,1520501400.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:01.227Z,1520501401.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:01.630Z,1520501401.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:02.026Z,1520501402.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:02.438Z,1520501402.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:02.835Z,1520501402.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:03.230Z,1520501403.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:03.630Z,1520501403.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:04.013Z,1520501404.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:04.412Z,1520501404.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:04.838Z,1520501404.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:05.289Z,1520501405.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:05.645Z,1520501405.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:06.028Z,1520501406.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:06.418Z,1520501406.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:06.820Z,1520501406.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:07.221Z,1520501407.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:07.623Z,1520501407.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:08.021Z,1520501408.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:08.436Z,1520501408.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:08.823Z,1520501408.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:09.223Z,1520501409.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:09.621Z,1520501409.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:10.024Z,1520501410.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:10.422Z,1520501410.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:10.826Z,1520501410.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:13.924Z,1520501413.924 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:13.925Z,1520501413.925 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36
2018-03-08T09:30:13.925Z,1520501413.925 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T09:30:13.927Z,1520501413.927 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:13.927Z,1520501413.927 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36
2018-03-08T09:30:13.927Z,1520501413.927 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T09:30:13.929Z,1520501413.929 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:13.929Z,1520501413.929 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 36
2018-03-08T09:30:13.929Z,1520501413.929 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T09:30:13.972Z,1520501413.972 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T09:30:13.973Z,1520501413.973 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T09:30:13.973Z,1520501413.973 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T09:30:14.089Z,1520501414.089 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T09:30:14.089Z,1520501414.089 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36
2018-03-08T09:30:14.090Z,1520501414.090 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T09:30:14.090Z,1520501414.090 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36
2018-03-08T09:30:14.090Z,1520501414.090 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T09:30:14.091Z,1520501414.091 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 36
2018-03-08T09:30:14.443Z,1520501414.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T09:30:14.443Z,1520501414.443 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:30:14.443Z,1520501414.443 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:30:14.444Z,1520501414.444 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T09:30:14.444Z,1520501414.444 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:30:14.445Z,1520501414.445 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:30:14.445Z,1520501414.445 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T09:30:14.445Z,1520501414.445 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:30:14.446Z,1520501414.446 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:30:14.834Z,1520501414.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-03-08T09:30:14.835Z,1520501414.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:15.236Z,1520501415.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-03-08T09:30:15.237Z,1520501415.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:15.638Z,1520501415.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-03-08T09:30:15.639Z,1520501415.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:16.034Z,1520501416.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-03-08T09:30:16.034Z,1520501416.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:16.448Z,1520501416.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-03-08T09:30:16.449Z,1520501416.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:16.847Z,1520501416.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-03-08T09:30:16.848Z,1520501416.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:17.247Z,1520501417.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-03-08T09:30:17.248Z,1520501417.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:17.638Z,1520501417.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-08T09:30:17.639Z,1520501417.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:18.046Z,1520501418.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-03-08T09:30:18.047Z,1520501418.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:18.442Z,1520501418.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-03-08T09:30:18.443Z,1520501418.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:18.841Z,1520501418.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-08T09:30:18.842Z,1520501418.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:19.248Z,1520501419.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-08T09:30:19.249Z,1520501419.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:19.654Z,1520501419.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T09:30:19.655Z,1520501419.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:20.041Z,1520501420.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T09:30:20.042Z,1520501420.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:20.435Z,1520501420.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-08T09:30:20.436Z,1520501420.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:20.837Z,1520501420.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-08T09:30:20.838Z,1520501420.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:21.232Z,1520501421.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-08T09:30:21.233Z,1520501421.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:21.644Z,1520501421.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-08T09:30:21.645Z,1520501421.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:22.040Z,1520501422.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-08T09:30:22.041Z,1520501422.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:22.447Z,1520501422.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-08T09:30:22.448Z,1520501422.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:22.846Z,1520501422.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-08T09:30:22.847Z,1520501422.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:23.247Z,1520501423.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-08T09:30:23.248Z,1520501423.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:23.642Z,1520501423.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-08T09:30:23.643Z,1520501423.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:24.036Z,1520501424.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T09:30:24.037Z,1520501424.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:24.443Z,1520501424.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-08T09:30:24.444Z,1520501424.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:24.841Z,1520501424.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T09:30:24.842Z,1520501424.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:25.247Z,1520501425.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T09:30:25.248Z,1520501425.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:25.648Z,1520501425.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T09:30:25.649Z,1520501425.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:26.044Z,1520501426.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T09:30:26.045Z,1520501426.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:26.442Z,1520501426.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T09:30:26.443Z,1520501426.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:26.842Z,1520501426.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-08T09:30:26.843Z,1520501426.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:27.238Z,1520501427.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-08T09:30:27.239Z,1520501427.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:27.643Z,1520501427.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-08T09:30:27.645Z,1520501427.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:28.047Z,1520501428.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-08T09:30:28.047Z,1520501428.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:28.449Z,1520501428.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-08T09:30:28.450Z,1520501428.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:28.850Z,1520501428.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T09:30:28.851Z,1520501428.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:29.254Z,1520501429.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-08T09:30:29.255Z,1520501429.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:29.640Z,1520501429.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T09:30:29.641Z,1520501429.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:30.035Z,1520501430.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T09:30:30.036Z,1520501430.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:30.438Z,1520501430.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T09:30:30.439Z,1520501430.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:30.835Z,1520501430.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T09:30:30.837Z,1520501430.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:31.246Z,1520501431.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-08T09:30:31.247Z,1520501431.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:31.658Z,1520501431.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T09:30:31.659Z,1520501431.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:32.048Z,1520501432.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-08T09:30:32.049Z,1520501432.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:32.446Z,1520501432.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-08T09:30:32.447Z,1520501432.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:32.837Z,1520501432.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T09:30:32.838Z,1520501432.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:33.235Z,1520501433.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T09:30:33.236Z,1520501433.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:33.646Z,1520501433.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T09:30:33.647Z,1520501433.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:34.050Z,1520501434.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:34.449Z,1520501434.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:34.850Z,1520501434.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:35.250Z,1520501435.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:35.642Z,1520501435.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:36.037Z,1520501436.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:36.444Z,1520501436.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:36.840Z,1520501436.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:37.259Z,1520501437.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:37.656Z,1520501437.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:38.047Z,1520501438.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:38.447Z,1520501438.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:38.848Z,1520501438.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:39.247Z,1520501439.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:39.647Z,1520501439.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:40.051Z,1520501440.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:40.458Z,1520501440.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:40.852Z,1520501440.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:41.250Z,1520501441.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:41.642Z,1520501441.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:42.045Z,1520501442.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:42.456Z,1520501442.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:42.850Z,1520501442.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:43.253Z,1520501443.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:43.656Z,1520501443.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:44.051Z,1520501444.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:44.455Z,1520501444.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:44.833Z,1520501444.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:45.231Z,1520501445.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:45.638Z,1520501445.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:46.030Z,1520501446.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:46.460Z,1520501446.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:46.860Z,1520501446.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:47.263Z,1520501447.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:47.630Z,1520501447.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:48.038Z,1520501448.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:48.431Z,1520501448.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:48.835Z,1520501448.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:49.262Z,1520501449.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:49.664Z,1520501449.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:50.061Z,1520501450.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:50.433Z,1520501450.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:50.834Z,1520501450.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:51.238Z,1520501451.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:51.635Z,1520501451.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:52.033Z,1520501452.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:52.468Z,1520501452.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:52.846Z,1520501452.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:53.246Z,1520501453.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:53.634Z,1520501453.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:54.033Z,1520501454.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:54.435Z,1520501454.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:54.832Z,1520501454.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:55.237Z,1520501455.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:55.640Z,1520501455.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:56.048Z,1520501456.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:56.437Z,1520501456.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:56.837Z,1520501456.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:57.239Z,1520501457.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:57.641Z,1520501457.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:58.038Z,1520501458.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:58.455Z,1520501458.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:58.850Z,1520501458.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:59.254Z,1520501459.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:30:59.642Z,1520501459.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:00.038Z,1520501460.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:00.435Z,1520501460.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:00.842Z,1520501460.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:01.247Z,1520501461.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:01.648Z,1520501461.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:02.055Z,1520501462.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:02.443Z,1520501462.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:02.835Z,1520501462.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:03.239Z,1520501463.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:03.642Z,1520501463.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:04.038Z,1520501464.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:04.447Z,1520501464.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:04.848Z,1520501464.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:05.248Z,1520501465.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:05.640Z,1520501465.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:06.043Z,1520501466.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:06.436Z,1520501466.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:06.839Z,1520501466.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:07.248Z,1520501467.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:07.647Z,1520501467.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:08.048Z,1520501468.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:08.443Z,1520501468.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:08.839Z,1520501468.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:09.246Z,1520501469.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:09.639Z,1520501469.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:10.034Z,1520501470.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:10.448Z,1520501470.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:10.848Z,1520501470.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:13.941Z,1520501473.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:14.060Z,1520501474.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:14.412Z,1520501474.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:14.814Z,1520501474.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:15.233Z,1520501475.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:15.638Z,1520501475.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:16.033Z,1520501476.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:16.409Z,1520501476.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:16.812Z,1520501476.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:17.215Z,1520501477.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:17.614Z,1520501477.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:18.014Z,1520501478.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:18.424Z,1520501478.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:18.827Z,1520501478.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:19.223Z,1520501479.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:19.615Z,1520501479.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:20.013Z,1520501480.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:20.413Z,1520501480.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:20.814Z,1520501480.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:21.226Z,1520501481.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:21.623Z,1520501481.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:22.030Z,1520501482.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:22.417Z,1520501482.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:22.822Z,1520501482.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:23.210Z,1520501483.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:23.619Z,1520501483.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:24.013Z,1520501484.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:24.424Z,1520501484.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:24.817Z,1520501484.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:25.225Z,1520501485.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:25.617Z,1520501485.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:26.017Z,1520501486.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:26.423Z,1520501486.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:26.815Z,1520501486.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:27.220Z,1520501487.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:27.638Z,1520501487.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:28.023Z,1520501488.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:28.419Z,1520501488.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:28.814Z,1520501488.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:29.218Z,1520501489.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:29.616Z,1520501489.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:30.015Z,1520501490.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:30.425Z,1520501490.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:30.823Z,1520501490.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:31.234Z,1520501491.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:31.619Z,1520501491.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:32.021Z,1520501492.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:32.420Z,1520501492.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:32.818Z,1520501492.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:33.225Z,1520501493.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:33.628Z,1520501493.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:34.028Z,1520501494.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:34.423Z,1520501494.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:34.825Z,1520501494.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:35.229Z,1520501495.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:35.625Z,1520501495.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:36.026Z,1520501496.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:36.428Z,1520501496.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:36.829Z,1520501496.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:37.237Z,1520501497.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:37.628Z,1520501497.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:38.023Z,1520501498.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:38.407Z,1520501498.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:38.809Z,1520501498.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:39.212Z,1520501499.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:39.633Z,1520501499.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:40.043Z,1520501500.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:40.414Z,1520501500.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:40.814Z,1520501500.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:41.214Z,1520501501.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:41.613Z,1520501501.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:41.650Z,1520501501.650 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T09:31:42.007Z,1520501502.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:42.433Z,1520501502.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:42.831Z,1520501502.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:43.241Z,1520501503.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:43.611Z,1520501503.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:44.006Z,1520501504.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:44.432Z,1520501504.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:44.813Z,1520501504.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:45.229Z,1520501505.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:45.638Z,1520501505.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:46.017Z,1520501506.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:46.414Z,1520501506.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:46.815Z,1520501506.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:47.210Z,1520501507.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:47.617Z,1520501507.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:48.014Z,1520501508.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:48.435Z,1520501508.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:48.816Z,1520501508.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:49.235Z,1520501509.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:49.622Z,1520501509.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:50.022Z,1520501510.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:50.430Z,1520501510.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:50.826Z,1520501510.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:51.230Z,1520501511.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:51.631Z,1520501511.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:52.034Z,1520501512.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:52.432Z,1520501512.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:52.843Z,1520501512.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:53.230Z,1520501513.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:53.622Z,1520501513.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:54.026Z,1520501514.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:54.431Z,1520501514.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:54.832Z,1520501514.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:55.238Z,1520501515.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:55.639Z,1520501515.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:56.011Z,1520501516.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:56.419Z,1520501516.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:56.810Z,1520501516.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:57.222Z,1520501517.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:57.628Z,1520501517.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:58.019Z,1520501518.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:58.450Z,1520501518.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:58.812Z,1520501518.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:59.214Z,1520501519.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:31:59.615Z,1520501519.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:00.022Z,1520501520.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:00.430Z,1520501520.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:00.819Z,1520501520.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:01.223Z,1520501521.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:01.614Z,1520501521.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:02.020Z,1520501522.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:02.417Z,1520501522.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:02.813Z,1520501522.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:03.234Z,1520501523.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:03.575Z,1520501523.575 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T09:32:03.575Z,1520501523.575 [NAL9602] Data Fault, FailCount= 1
2018-03-08T09:32:03.575Z,1520501523.575 [NAL9602](ERROR): Data Fault
2018-03-08T09:32:03.626Z,1520501523.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:03.648Z,1520501523.648 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T09:32:03.979Z,1520501523.979 [NAL9602](INFO): Powering down
2018-03-08T09:32:04.033Z,1520501524.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:04.425Z,1520501524.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:04.809Z,1520501524.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:04.848Z,1520501524.848 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T09:32:04.848Z,1520501524.848 [NAL9602] No Fault, FailCount= 1
2018-03-08T09:32:05.201Z,1520501525.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:05.610Z,1520501525.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:06.005Z,1520501526.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:06.409Z,1520501526.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:06.806Z,1520501526.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:07.209Z,1520501527.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:07.606Z,1520501527.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:08.009Z,1520501528.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:08.407Z,1520501528.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:08.811Z,1520501528.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:09.204Z,1520501529.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:09.608Z,1520501529.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:10.011Z,1520501530.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:10.407Z,1520501530.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:10.807Z,1520501530.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:11.209Z,1520501531.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:14.308Z,1520501534.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:14.439Z,1520501534.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:14.838Z,1520501534.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:15.213Z,1520501535.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:15.613Z,1520501535.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:16.014Z,1520501536.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:16.412Z,1520501536.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:16.815Z,1520501536.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:17.211Z,1520501537.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:17.611Z,1520501537.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:18.019Z,1520501538.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:18.414Z,1520501538.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:18.810Z,1520501538.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:19.214Z,1520501539.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:19.614Z,1520501539.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:20.015Z,1520501540.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:20.411Z,1520501540.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:20.838Z,1520501540.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:21.216Z,1520501541.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:21.615Z,1520501541.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:22.012Z,1520501542.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:22.411Z,1520501542.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:22.816Z,1520501542.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:23.250Z,1520501543.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:23.611Z,1520501543.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:24.014Z,1520501544.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:24.420Z,1520501544.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:24.815Z,1520501544.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:25.214Z,1520501545.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:25.615Z,1520501545.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:26.038Z,1520501546.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:26.414Z,1520501546.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:26.815Z,1520501546.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:27.214Z,1520501547.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:27.616Z,1520501547.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:28.017Z,1520501548.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:28.414Z,1520501548.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:28.815Z,1520501548.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:29.219Z,1520501549.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:29.615Z,1520501549.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:30.015Z,1520501550.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:30.416Z,1520501550.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:30.818Z,1520501550.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:31.244Z,1520501551.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:31.618Z,1520501551.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:32.014Z,1520501552.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:32.418Z,1520501552.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:32.819Z,1520501552.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:33.216Z,1520501553.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:33.622Z,1520501553.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:34.011Z,1520501554.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:34.379Z,1520501554.379 [NAL9602](INFO): Powering up NAL9602
2018-03-08T09:32:34.427Z,1520501554.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:34.825Z,1520501554.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:35.214Z,1520501555.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:35.623Z,1520501555.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:36.029Z,1520501556.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:36.427Z,1520501556.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:36.818Z,1520501556.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:37.232Z,1520501557.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:37.608Z,1520501557.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:38.029Z,1520501558.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:38.408Z,1520501558.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:38.803Z,1520501558.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:39.210Z,1520501559.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:39.613Z,1520501559.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:40.002Z,1520501560.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:40.433Z,1520501560.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:40.812Z,1520501560.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:41.206Z,1520501561.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:41.614Z,1520501561.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:42.015Z,1520501562.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:42.411Z,1520501562.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:42.806Z,1520501562.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:43.209Z,1520501563.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:43.615Z,1520501563.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:44.011Z,1520501564.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:44.413Z,1520501564.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:44.842Z,1520501564.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:45.175Z,1520501565.175 [NAL9602](INFO): NAL9602 initialized
2018-03-08T09:32:45.214Z,1520501565.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:45.621Z,1520501565.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:46.019Z,1520501566.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:46.445Z,1520501566.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:46.826Z,1520501566.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:47.216Z,1520501567.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:47.623Z,1520501567.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:48.017Z,1520501568.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:48.424Z,1520501568.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:48.824Z,1520501568.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:49.221Z,1520501569.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:49.614Z,1520501569.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:50.027Z,1520501570.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:50.419Z,1520501570.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:50.816Z,1520501570.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:51.231Z,1520501571.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:51.625Z,1520501571.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:52.030Z,1520501572.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:52.416Z,1520501572.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:52.813Z,1520501572.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:53.224Z,1520501573.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:53.624Z,1520501573.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:54.021Z,1520501574.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:54.415Z,1520501574.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:54.826Z,1520501574.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:55.224Z,1520501575.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:55.623Z,1520501575.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:56.021Z,1520501576.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:56.422Z,1520501576.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:56.819Z,1520501576.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:57.248Z,1520501577.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:57.620Z,1520501577.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:58.031Z,1520501578.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:58.426Z,1520501578.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:58.816Z,1520501578.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:59.232Z,1520501579.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:32:59.624Z,1520501579.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:00.020Z,1520501580.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:00.419Z,1520501580.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:00.819Z,1520501580.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:01.226Z,1520501581.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:01.624Z,1520501581.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:02.030Z,1520501582.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:02.423Z,1520501582.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:02.822Z,1520501582.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:03.225Z,1520501583.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:03.630Z,1520501583.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:04.024Z,1520501584.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:04.427Z,1520501584.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:04.819Z,1520501584.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:05.223Z,1520501585.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:05.625Z,1520501585.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:06.025Z,1520501586.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:06.422Z,1520501586.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:06.823Z,1520501586.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:07.223Z,1520501587.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:07.625Z,1520501587.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:08.024Z,1520501588.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:08.420Z,1520501588.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:08.815Z,1520501588.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:09.230Z,1520501589.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:09.624Z,1520501589.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:10.025Z,1520501590.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:10.421Z,1520501590.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:10.822Z,1520501590.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:11.231Z,1520501591.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:14.324Z,1520501594.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:14.471Z,1520501594.471 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:14.471Z,1520501594.471 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37
2018-03-08T09:33:14.471Z,1520501594.471 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T09:33:14.473Z,1520501594.473 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:14.473Z,1520501594.473 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37
2018-03-08T09:33:14.473Z,1520501594.473 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T09:33:14.475Z,1520501594.475 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:14.475Z,1520501594.475 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 37
2018-03-08T09:33:14.475Z,1520501594.475 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T09:33:14.487Z,1520501594.487 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T09:33:14.487Z,1520501594.487 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T09:33:14.487Z,1520501594.487 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T09:33:14.849Z,1520501594.849 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T09:33:14.849Z,1520501594.849 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37
2018-03-08T09:33:14.849Z,1520501594.849 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T09:33:14.849Z,1520501594.849 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37
2018-03-08T09:33:14.850Z,1520501594.850 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T09:33:14.850Z,1520501594.850 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 37
2018-03-08T09:33:15.199Z,1520501595.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T09:33:15.200Z,1520501595.200 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:33:15.200Z,1520501595.200 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:33:15.217Z,1520501595.217 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T09:33:15.217Z,1520501595.217 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:33:15.217Z,1520501595.217 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:33:15.218Z,1520501595.218 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T09:33:15.218Z,1520501595.218 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:33:15.219Z,1520501595.219 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:33:15.624Z,1520501595.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T09:33:15.625Z,1520501595.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:16.017Z,1520501596.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.5 s old, using for 20.0 s.
2018-03-08T09:33:16.018Z,1520501596.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:16.431Z,1520501596.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T09:33:16.432Z,1520501596.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:16.827Z,1520501596.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T09:33:16.828Z,1520501596.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:17.239Z,1520501597.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T09:33:17.240Z,1520501597.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:17.608Z,1520501597.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.1 s old, using for 20.0 s.
2018-03-08T09:33:17.634Z,1520501597.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:18.029Z,1520501598.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T09:33:18.030Z,1520501598.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:18.426Z,1520501598.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T09:33:18.427Z,1520501598.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:18.807Z,1520501598.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2018-03-08T09:33:18.808Z,1520501598.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:19.238Z,1520501599.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T09:33:19.239Z,1520501599.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:19.628Z,1520501599.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T09:33:19.629Z,1520501599.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:20.045Z,1520501600.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T09:33:20.046Z,1520501600.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:20.430Z,1520501600.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T09:33:20.431Z,1520501600.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:20.811Z,1520501600.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2018-03-08T09:33:20.812Z,1520501600.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:21.235Z,1520501601.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T09:33:21.236Z,1520501601.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:21.615Z,1520501601.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2018-03-08T09:33:21.637Z,1520501601.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:22.038Z,1520501602.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T09:33:22.039Z,1520501602.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:22.411Z,1520501602.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2018-03-08T09:33:22.412Z,1520501602.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:22.807Z,1520501602.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-03-08T09:33:22.808Z,1520501602.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:23.220Z,1520501603.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-03-08T09:33:23.237Z,1520501603.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:23.616Z,1520501603.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-03-08T09:33:23.617Z,1520501603.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:24.042Z,1520501604.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T09:33:24.043Z,1520501604.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:24.411Z,1520501604.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-03-08T09:33:24.412Z,1520501604.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:24.810Z,1520501604.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-03-08T09:33:24.811Z,1520501604.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:25.224Z,1520501605.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T09:33:25.241Z,1520501605.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:25.627Z,1520501605.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T09:33:25.644Z,1520501605.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:26.019Z,1520501606.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2018-03-08T09:33:26.020Z,1520501606.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:26.420Z,1520501606.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2018-03-08T09:33:26.421Z,1520501606.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:26.818Z,1520501606.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2018-03-08T09:33:26.819Z,1520501606.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:27.223Z,1520501607.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T09:33:27.224Z,1520501607.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:27.630Z,1520501607.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T09:33:27.631Z,1520501607.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:28.030Z,1520501608.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T09:33:28.031Z,1520501608.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:28.412Z,1520501608.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2018-03-08T09:33:28.413Z,1520501608.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:28.818Z,1520501608.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2018-03-08T09:33:28.819Z,1520501608.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:29.223Z,1520501609.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T09:33:29.224Z,1520501609.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:29.623Z,1520501609.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T09:33:29.624Z,1520501609.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:30.030Z,1520501610.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T09:33:30.031Z,1520501610.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:30.418Z,1520501610.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2018-03-08T09:33:30.419Z,1520501610.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:30.810Z,1520501610.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2018-03-08T09:33:30.811Z,1520501610.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:31.223Z,1520501611.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T09:33:31.224Z,1520501611.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:31.630Z,1520501611.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T09:33:31.631Z,1520501611.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:32.023Z,1520501612.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T09:33:32.024Z,1520501612.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:32.415Z,1520501612.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2018-03-08T09:33:32.416Z,1520501612.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:32.817Z,1520501612.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-03-08T09:33:32.818Z,1520501612.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:33.229Z,1520501613.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T09:33:33.230Z,1520501613.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:33.624Z,1520501613.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T09:33:33.625Z,1520501613.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:34.030Z,1520501614.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T09:33:34.031Z,1520501614.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:34.414Z,1520501614.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-03-08T09:33:34.415Z,1520501614.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:34.822Z,1520501614.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:35.223Z,1520501615.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:35.623Z,1520501615.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:36.023Z,1520501616.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:36.421Z,1520501616.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:36.809Z,1520501616.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:37.230Z,1520501617.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:37.623Z,1520501617.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:38.026Z,1520501618.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:38.418Z,1520501618.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:38.814Z,1520501618.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:39.226Z,1520501619.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:39.625Z,1520501619.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:40.024Z,1520501620.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:40.416Z,1520501620.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:40.820Z,1520501620.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:41.225Z,1520501621.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:41.623Z,1520501621.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:42.023Z,1520501622.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:42.415Z,1520501622.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:42.814Z,1520501622.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:43.231Z,1520501623.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:43.623Z,1520501623.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:44.024Z,1520501624.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:44.415Z,1520501624.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:44.821Z,1520501624.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:45.267Z,1520501625.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:45.625Z,1520501625.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:46.031Z,1520501626.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:46.437Z,1520501626.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:46.821Z,1520501626.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:47.260Z,1520501627.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:47.640Z,1520501627.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:48.030Z,1520501628.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:48.427Z,1520501628.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:48.823Z,1520501628.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:49.230Z,1520501629.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:49.631Z,1520501629.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:50.027Z,1520501630.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:50.422Z,1520501630.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:50.822Z,1520501630.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:51.229Z,1520501631.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:51.634Z,1520501631.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:52.025Z,1520501632.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:52.422Z,1520501632.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:52.826Z,1520501632.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:53.231Z,1520501633.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:53.630Z,1520501633.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:54.019Z,1520501634.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:54.422Z,1520501634.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:54.819Z,1520501634.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:55.228Z,1520501635.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:55.632Z,1520501635.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:56.033Z,1520501636.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:56.431Z,1520501636.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:56.814Z,1520501636.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:57.236Z,1520501637.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:57.633Z,1520501637.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:58.032Z,1520501638.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:58.407Z,1520501638.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:58.812Z,1520501638.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:59.239Z,1520501639.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:33:59.633Z,1520501639.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:00.012Z,1520501640.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:00.421Z,1520501640.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:00.813Z,1520501640.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:01.213Z,1520501641.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:01.641Z,1520501641.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:02.038Z,1520501642.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:02.450Z,1520501642.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:02.818Z,1520501642.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:03.216Z,1520501643.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:03.619Z,1520501643.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:04.027Z,1520501644.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:04.427Z,1520501644.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:04.813Z,1520501644.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:05.235Z,1520501645.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:05.627Z,1520501645.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:06.020Z,1520501646.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:06.414Z,1520501646.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:06.825Z,1520501646.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:07.226Z,1520501647.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:07.628Z,1520501647.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:08.025Z,1520501648.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:08.419Z,1520501648.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:08.821Z,1520501648.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:09.228Z,1520501649.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:09.629Z,1520501649.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:10.035Z,1520501650.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:10.426Z,1520501650.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:10.801Z,1520501650.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:10.804Z,1520501650.804 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T09:34:10.804Z,1520501650.804 [Default:CheckIn:C.Wait] Stopped
2018-03-08T09:34:10.804Z,1520501650.804 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T09:34:10.804Z,1520501650.804 [Default:CheckIn:D] Running Loop=1
2018-03-08T09:34:11.231Z,1520501651.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:11.235Z,1520501651.235 [Default:CheckIn:D] Stopped
2018-03-08T09:34:11.235Z,1520501651.235 [Default:CheckIn:E] Running Loop=1
2018-03-08T09:34:11.630Z,1520501651.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:11.634Z,1520501651.634 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 108.440495 min 
2018-03-08T09:34:11.634Z,1520501651.634 [Default:CheckIn:E] Stopped
2018-03-08T09:34:11.634Z,1520501651.634 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T09:34:11.634Z,1520501651.634 [Default:CheckIn] Stopped
2018-03-08T09:34:11.634Z,1520501651.634 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T09:34:11.634Z,1520501651.634 [Default:CheckIn](INFO): Running loop #11
2018-03-08T09:34:11.634Z,1520501651.634 [Default:CheckIn] Running Loop=11
2018-03-08T09:34:11.635Z,1520501651.635 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T09:34:11.635Z,1520501651.635 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T09:34:14.981Z,1520501654.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:15.182Z,1520501655.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:15.557Z,1520501655.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:16.067Z,1520501656.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:16.391Z,1520501656.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:16.768Z,1520501656.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:17.192Z,1520501657.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:17.587Z,1520501657.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:17.971Z,1520501657.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:18.364Z,1520501658.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:18.767Z,1520501658.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:19.164Z,1520501659.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:19.570Z,1520501659.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:19.975Z,1520501659.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:20.374Z,1520501660.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:20.771Z,1520501660.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:21.186Z,1520501661.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:21.570Z,1520501661.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:21.971Z,1520501661.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:22.378Z,1520501662.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:22.804Z,1520501662.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:23.180Z,1520501663.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:23.575Z,1520501663.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:23.968Z,1520501663.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:24.402Z,1520501664.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:24.767Z,1520501664.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:25.173Z,1520501665.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:25.579Z,1520501665.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:25.000Z,1520501666.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:26.382Z,1520501666.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:26.770Z,1520501666.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:27.171Z,1520501667.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:27.586Z,1520501667.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:27.965Z,1520501667.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:28.381Z,1520501668.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:28.776Z,1520501668.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:29.198Z,1520501669.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:29.565Z,1520501669.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:29.963Z,1520501669.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:30.375Z,1520501670.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:30.786Z,1520501670.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:31.180Z,1520501671.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:31.581Z,1520501671.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:31.983Z,1520501671.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:32.402Z,1520501672.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:32.764Z,1520501672.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:33.171Z,1520501673.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:33.567Z,1520501673.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:33.967Z,1520501673.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:34.382Z,1520501674.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:34.780Z,1520501674.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:35.172Z,1520501675.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:35.586Z,1520501675.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:35.965Z,1520501675.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:36.375Z,1520501676.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:36.771Z,1520501676.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:37.178Z,1520501677.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:37.581Z,1520501677.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:37.981Z,1520501677.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:38.378Z,1520501678.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:38.786Z,1520501678.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:39.172Z,1520501679.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:39.571Z,1520501679.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:39.966Z,1520501679.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:40.373Z,1520501680.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:40.782Z,1520501680.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:41.182Z,1520501681.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:41.570Z,1520501681.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:41.986Z,1520501681.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:42.366Z,1520501682.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:42.772Z,1520501682.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:43.167Z,1520501683.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:43.575Z,1520501683.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:43.984Z,1520501683.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:44.381Z,1520501684.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:44.783Z,1520501684.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:45.186Z,1520501685.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:45.565Z,1520501685.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:45.977Z,1520501685.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:46.376Z,1520501686.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:46.801Z,1520501686.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:47.183Z,1520501687.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:47.572Z,1520501687.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:47.974Z,1520501687.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:48.386Z,1520501688.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:48.772Z,1520501688.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:49.172Z,1520501689.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:49.583Z,1520501689.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:50.006Z,1520501690.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:50.407Z,1520501690.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:50.771Z,1520501690.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:51.171Z,1520501691.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:51.575Z,1520501691.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:51.965Z,1520501691.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:52.381Z,1520501692.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:52.782Z,1520501692.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:53.203Z,1520501693.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:53.567Z,1520501693.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:53.964Z,1520501693.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:54.371Z,1520501694.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:54.786Z,1520501694.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:55.167Z,1520501695.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:55.581Z,1520501695.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:55.983Z,1520501695.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:56.404Z,1520501696.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:56.767Z,1520501696.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:57.181Z,1520501697.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:57.575Z,1520501697.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:57.978Z,1520501697.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:58.384Z,1520501698.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:58.783Z,1520501698.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:59.177Z,1520501699.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:59.602Z,1520501699.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:34:59.968Z,1520501699.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:00.377Z,1520501700.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:00.772Z,1520501700.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:01.175Z,1520501701.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:01.584Z,1520501701.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:02.006Z,1520501702.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:02.382Z,1520501702.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:02.779Z,1520501702.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:03.165Z,1520501703.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:03.563Z,1520501703.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:03.975Z,1520501703.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:04.376Z,1520501704.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:04.784Z,1520501704.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:05.173Z,1520501705.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:05.570Z,1520501705.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:05.981Z,1520501705.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:06.372Z,1520501706.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:06.773Z,1520501706.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:07.169Z,1520501707.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:07.602Z,1520501707.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:07.983Z,1520501707.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:08.380Z,1520501708.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:08.782Z,1520501708.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:09.186Z,1520501709.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:09.567Z,1520501709.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:09.965Z,1520501709.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:10.380Z,1520501710.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:10.806Z,1520501710.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:11.170Z,1520501711.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:11.573Z,1520501711.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:11.970Z,1520501711.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:15.063Z,1520501715.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:15.181Z,1520501715.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:15.567Z,1520501715.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:15.964Z,1520501715.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:16.364Z,1520501716.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:16.734Z,1520501716.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:17.134Z,1520501717.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:17.529Z,1520501717.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:17.934Z,1520501717.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:18.368Z,1520501718.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:18.737Z,1520501718.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:19.164Z,1520501719.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:19.534Z,1520501719.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:19.932Z,1520501719.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:20.334Z,1520501720.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:20.730Z,1520501720.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:21.129Z,1520501721.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:21.540Z,1520501721.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:21.948Z,1520501721.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:22.337Z,1520501722.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:22.733Z,1520501722.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:23.131Z,1520501723.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:23.536Z,1520501723.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:23.939Z,1520501723.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:24.348Z,1520501724.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:24.736Z,1520501724.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:25.137Z,1520501725.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:25.534Z,1520501725.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:25.939Z,1520501725.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:26.339Z,1520501726.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:26.739Z,1520501726.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:27.131Z,1520501727.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:27.554Z,1520501727.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:27.956Z,1520501727.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:28.346Z,1520501728.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:28.740Z,1520501728.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:29.145Z,1520501729.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:29.539Z,1520501729.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:29.941Z,1520501729.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:30.349Z,1520501730.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:30.759Z,1520501730.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:31.148Z,1520501731.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:31.540Z,1520501731.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:31.941Z,1520501731.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:32.335Z,1520501732.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:32.744Z,1520501732.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:33.131Z,1520501733.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:33.549Z,1520501733.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:33.949Z,1520501733.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:34.359Z,1520501734.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:34.740Z,1520501734.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:35.146Z,1520501735.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:35.544Z,1520501735.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:35.945Z,1520501735.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:36.349Z,1520501736.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:36.749Z,1520501736.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:37.146Z,1520501737.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:37.553Z,1520501737.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:37.940Z,1520501737.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:38.342Z,1520501738.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:38.742Z,1520501738.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:39.141Z,1520501739.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:39.547Z,1520501739.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:39.949Z,1520501739.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:40.347Z,1520501740.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:40.743Z,1520501740.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:41.146Z,1520501741.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:41.524Z,1520501741.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:41.947Z,1520501741.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:42.378Z,1520501742.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:42.762Z,1520501742.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:43.158Z,1520501743.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:43.569Z,1520501743.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:43.938Z,1520501743.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:44.338Z,1520501744.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:44.788Z,1520501744.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:45.161Z,1520501745.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:45.546Z,1520501745.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:45.972Z,1520501745.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:46.347Z,1520501746.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:46.737Z,1520501746.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:47.142Z,1520501747.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:47.534Z,1520501747.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:47.934Z,1520501747.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:48.344Z,1520501748.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:48.744Z,1520501748.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:49.144Z,1520501749.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:49.538Z,1520501749.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:49.933Z,1520501749.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:50.335Z,1520501750.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:50.738Z,1520501750.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:51.132Z,1520501751.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:51.551Z,1520501751.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:51.947Z,1520501751.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:52.354Z,1520501752.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:52.738Z,1520501752.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:53.135Z,1520501753.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:53.538Z,1520501753.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:53.938Z,1520501753.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:54.354Z,1520501754.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:54.754Z,1520501754.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:55.159Z,1520501755.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:55.539Z,1520501755.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:55.932Z,1520501755.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:56.341Z,1520501756.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:56.741Z,1520501756.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:57.133Z,1520501757.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:57.545Z,1520501757.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:57.949Z,1520501757.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:58.348Z,1520501758.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:58.741Z,1520501758.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:59.146Z,1520501759.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:59.537Z,1520501759.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:35:59.941Z,1520501759.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:00.352Z,1520501760.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:00.754Z,1520501760.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:01.154Z,1520501761.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:01.601Z,1520501761.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:01.931Z,1520501761.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:02.387Z,1520501762.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:02.747Z,1520501762.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:03.139Z,1520501763.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:03.554Z,1520501763.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:03.952Z,1520501763.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:04.407Z,1520501764.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:04.763Z,1520501764.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:05.143Z,1520501765.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:05.546Z,1520501765.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:05.941Z,1520501765.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:06.351Z,1520501766.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:06.749Z,1520501766.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:07.155Z,1520501767.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:07.550Z,1520501767.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:07.948Z,1520501767.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:08.344Z,1520501768.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:08.755Z,1520501768.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:09.159Z,1520501769.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:09.556Z,1520501769.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:09.963Z,1520501769.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:10.345Z,1520501770.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:10.734Z,1520501770.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:11.135Z,1520501771.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:11.540Z,1520501771.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:11.933Z,1520501771.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:12.337Z,1520501772.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:15.466Z,1520501775.466 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:15.466Z,1520501775.466 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38
2018-03-08T09:36:15.466Z,1520501775.466 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T09:36:15.468Z,1520501775.468 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:15.468Z,1520501775.468 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38
2018-03-08T09:36:15.468Z,1520501775.468 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T09:36:15.470Z,1520501775.470 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:15.470Z,1520501775.470 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 38
2018-03-08T09:36:15.470Z,1520501775.470 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T09:36:15.482Z,1520501775.482 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T09:36:15.482Z,1520501775.482 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T09:36:15.483Z,1520501775.483 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T09:36:15.633Z,1520501775.633 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T09:36:15.633Z,1520501775.633 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38
2018-03-08T09:36:15.633Z,1520501775.633 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T09:36:15.633Z,1520501775.633 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38
2018-03-08T09:36:15.634Z,1520501775.634 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T09:36:15.634Z,1520501775.634 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 38
2018-03-08T09:36:15.971Z,1520501775.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T09:36:15.971Z,1520501775.971 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:36:15.972Z,1520501775.972 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:36:15.972Z,1520501775.972 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T09:36:15.972Z,1520501775.972 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:36:15.973Z,1520501775.973 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:36:15.973Z,1520501775.973 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T09:36:15.974Z,1520501775.974 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:36:15.974Z,1520501775.974 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:36:16.342Z,1520501776.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-03-08T09:36:16.343Z,1520501776.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:16.746Z,1520501776.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-03-08T09:36:16.747Z,1520501776.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:17.143Z,1520501777.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-03-08T09:36:17.144Z,1520501777.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:17.562Z,1520501777.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-03-08T09:36:17.563Z,1520501777.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:17.954Z,1520501777.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-03-08T09:36:17.955Z,1520501777.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:18.355Z,1520501778.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-03-08T09:36:18.356Z,1520501778.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:18.740Z,1520501778.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-03-08T09:36:18.741Z,1520501778.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:19.140Z,1520501779.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-08T09:36:19.141Z,1520501779.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:19.550Z,1520501779.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-03-08T09:36:19.551Z,1520501779.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:19.943Z,1520501779.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-03-08T09:36:19.944Z,1520501779.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:20.348Z,1520501780.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-08T09:36:20.349Z,1520501780.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:20.759Z,1520501780.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-08T09:36:20.761Z,1520501780.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:21.155Z,1520501781.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T09:36:21.156Z,1520501781.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:21.550Z,1520501781.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T09:36:21.551Z,1520501781.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:21.946Z,1520501781.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-08T09:36:21.947Z,1520501781.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:22.346Z,1520501782.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-08T09:36:22.347Z,1520501782.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:22.750Z,1520501782.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-08T09:36:22.751Z,1520501782.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:23.146Z,1520501783.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-08T09:36:23.147Z,1520501783.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:23.552Z,1520501783.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-08T09:36:23.553Z,1520501783.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:23.954Z,1520501783.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-08T09:36:23.955Z,1520501783.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:24.362Z,1520501784.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-08T09:36:24.363Z,1520501784.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:24.747Z,1520501784.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-08T09:36:24.748Z,1520501784.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:25.149Z,1520501785.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-08T09:36:25.150Z,1520501785.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:25.546Z,1520501785.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T09:36:25.547Z,1520501785.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:25.946Z,1520501785.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-08T09:36:25.947Z,1520501785.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:26.351Z,1520501786.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T09:36:26.352Z,1520501786.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:26.764Z,1520501786.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T09:36:26.766Z,1520501786.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:27.164Z,1520501787.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T09:36:27.165Z,1520501787.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:27.545Z,1520501787.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T09:36:27.546Z,1520501787.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:27.949Z,1520501787.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T09:36:27.950Z,1520501787.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:28.349Z,1520501788.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-08T09:36:28.350Z,1520501788.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:28.750Z,1520501788.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-08T09:36:28.752Z,1520501788.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:29.150Z,1520501789.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-08T09:36:29.151Z,1520501789.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:29.562Z,1520501789.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-08T09:36:29.563Z,1520501789.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:29.946Z,1520501789.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-08T09:36:29.947Z,1520501789.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:30.354Z,1520501790.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T09:36:30.355Z,1520501790.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:30.746Z,1520501790.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-08T09:36:30.747Z,1520501790.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:31.140Z,1520501791.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T09:36:31.141Z,1520501791.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:31.545Z,1520501791.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T09:36:31.546Z,1520501791.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:31.944Z,1520501791.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T09:36:31.945Z,1520501791.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:32.352Z,1520501792.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T09:36:32.353Z,1520501792.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:32.762Z,1520501792.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-08T09:36:32.763Z,1520501792.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:33.167Z,1520501793.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T09:36:33.169Z,1520501793.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:33.558Z,1520501793.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-08T09:36:33.560Z,1520501793.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:33.950Z,1520501793.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-08T09:36:33.951Z,1520501793.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:34.346Z,1520501794.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T09:36:34.347Z,1520501794.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:34.743Z,1520501794.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T09:36:34.744Z,1520501794.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:35.142Z,1520501795.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T09:36:35.143Z,1520501795.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:35.557Z,1520501795.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:35.953Z,1520501795.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:36.353Z,1520501796.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:36.751Z,1520501796.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:37.151Z,1520501797.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:37.553Z,1520501797.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:37.954Z,1520501797.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:38.365Z,1520501798.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:38.760Z,1520501798.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:39.169Z,1520501799.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:39.553Z,1520501799.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:39.956Z,1520501799.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:40.346Z,1520501800.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:40.755Z,1520501800.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:41.142Z,1520501801.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:41.579Z,1520501801.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:41.970Z,1520501801.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:42.356Z,1520501802.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:42.747Z,1520501802.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:43.147Z,1520501803.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:43.546Z,1520501803.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:43.947Z,1520501803.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:44.349Z,1520501804.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:44.748Z,1520501804.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:45.153Z,1520501805.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:45.559Z,1520501805.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:45.947Z,1520501805.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:46.346Z,1520501806.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:46.739Z,1520501806.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:47.146Z,1520501807.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:47.557Z,1520501807.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:47.957Z,1520501807.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:48.363Z,1520501808.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:48.744Z,1520501808.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:49.150Z,1520501809.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:49.548Z,1520501809.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:49.947Z,1520501809.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:50.361Z,1520501810.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:50.758Z,1520501810.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:51.165Z,1520501811.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:51.553Z,1520501811.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:51.954Z,1520501811.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:52.355Z,1520501812.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:52.760Z,1520501812.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:53.158Z,1520501813.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:53.567Z,1520501813.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:53.961Z,1520501813.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:54.366Z,1520501814.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:54.738Z,1520501814.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:55.139Z,1520501815.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:55.542Z,1520501815.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:55.942Z,1520501815.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:56.351Z,1520501816.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:56.755Z,1520501816.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:57.155Z,1520501817.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:57.547Z,1520501817.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:57.950Z,1520501817.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:58.347Z,1520501818.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:58.798Z,1520501818.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:59.170Z,1520501819.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:59.551Z,1520501819.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:36:59.971Z,1520501819.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:00.378Z,1520501820.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:00.745Z,1520501820.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:01.145Z,1520501821.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:01.551Z,1520501821.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:01.942Z,1520501821.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:02.362Z,1520501822.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:02.751Z,1520501822.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:03.151Z,1520501823.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:03.550Z,1520501823.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:03.945Z,1520501823.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:04.347Z,1520501824.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:04.747Z,1520501824.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:05.149Z,1520501825.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:05.554Z,1520501825.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:05.952Z,1520501825.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:06.358Z,1520501826.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:06.746Z,1520501826.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:07.159Z,1520501827.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:07.550Z,1520501827.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:07.946Z,1520501827.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:08.356Z,1520501828.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:08.782Z,1520501828.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:09.156Z,1520501829.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:09.550Z,1520501829.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:09.946Z,1520501829.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:10.346Z,1520501830.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:10.745Z,1520501830.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:11.143Z,1520501831.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:11.586Z,1520501831.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:11.960Z,1520501831.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:12.362Z,1520501832.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:15.454Z,1520501835.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:15.656Z,1520501835.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:15.962Z,1520501835.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:16.344Z,1520501836.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:16.755Z,1520501836.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:17.135Z,1520501837.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:17.534Z,1520501837.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:17.935Z,1520501837.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:18.432Z,1520501838.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:18.763Z,1520501838.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:19.148Z,1520501839.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:19.550Z,1520501839.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:19.937Z,1520501839.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:20.347Z,1520501840.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:20.739Z,1520501840.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:21.138Z,1520501841.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:21.548Z,1520501841.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:21.960Z,1520501841.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:22.356Z,1520501842.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:22.746Z,1520501842.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:23.144Z,1520501843.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:23.544Z,1520501843.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:23.943Z,1520501843.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:24.357Z,1520501844.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:24.761Z,1520501844.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:25.155Z,1520501845.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:25.546Z,1520501845.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:25.942Z,1520501845.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:26.351Z,1520501846.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:26.746Z,1520501846.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:27.150Z,1520501847.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:27.557Z,1520501847.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:27.961Z,1520501847.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:28.357Z,1520501848.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:28.746Z,1520501848.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:29.146Z,1520501849.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:29.545Z,1520501849.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:29.951Z,1520501849.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:30.356Z,1520501850.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:30.760Z,1520501850.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:31.149Z,1520501851.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:31.546Z,1520501851.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:31.958Z,1520501851.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:32.345Z,1520501852.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:32.751Z,1520501852.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:33.148Z,1520501853.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:33.557Z,1520501853.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:33.965Z,1520501853.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:34.384Z,1520501854.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:34.751Z,1520501854.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:35.150Z,1520501855.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:35.547Z,1520501855.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:35.941Z,1520501855.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:36.352Z,1520501856.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:36.755Z,1520501856.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:37.150Z,1520501857.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:37.551Z,1520501857.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:37.943Z,1520501857.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:38.350Z,1520501858.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:38.746Z,1520501858.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:39.146Z,1520501859.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:39.555Z,1520501859.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:39.956Z,1520501859.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:40.364Z,1520501860.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:40.751Z,1520501860.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:41.150Z,1520501861.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:41.550Z,1520501861.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:41.957Z,1520501861.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:42.370Z,1520501862.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:42.778Z,1520501862.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:43.164Z,1520501863.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:43.555Z,1520501863.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:43.967Z,1520501863.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:44.355Z,1520501864.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:44.739Z,1520501864.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:45.178Z,1520501865.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:45.561Z,1520501865.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:45.970Z,1520501865.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:46.370Z,1520501866.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:46.735Z,1520501866.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:47.171Z,1520501867.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:47.542Z,1520501867.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:47.943Z,1520501867.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:48.348Z,1520501868.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:48.754Z,1520501868.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:49.155Z,1520501869.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:49.547Z,1520501869.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:49.946Z,1520501869.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:50.342Z,1520501870.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:50.750Z,1520501870.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:51.142Z,1520501871.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:51.552Z,1520501871.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:51.958Z,1520501871.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:52.351Z,1520501872.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:52.746Z,1520501872.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:53.151Z,1520501873.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:53.543Z,1520501873.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:53.941Z,1520501873.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:54.353Z,1520501874.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:54.751Z,1520501874.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:55.147Z,1520501875.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:55.543Z,1520501875.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:55.933Z,1520501875.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:56.342Z,1520501876.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:56.734Z,1520501876.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:57.137Z,1520501877.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:57.540Z,1520501877.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:57.948Z,1520501877.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:58.353Z,1520501878.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:58.736Z,1520501878.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:59.137Z,1520501879.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:59.534Z,1520501879.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:37:59.934Z,1520501879.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:00.345Z,1520501880.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:00.752Z,1520501880.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:01.198Z,1520501881.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:01.551Z,1520501881.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:01.950Z,1520501881.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:02.351Z,1520501882.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:02.745Z,1520501882.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:03.143Z,1520501883.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:03.553Z,1520501883.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:03.965Z,1520501883.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:04.357Z,1520501884.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:04.743Z,1520501884.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:05.144Z,1520501885.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:05.550Z,1520501885.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:05.944Z,1520501885.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:06.358Z,1520501886.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:06.761Z,1520501886.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:07.152Z,1520501887.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:07.544Z,1520501887.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:07.950Z,1520501887.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:08.355Z,1520501888.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:08.754Z,1520501888.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:09.157Z,1520501889.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:09.563Z,1520501889.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:09.961Z,1520501889.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:10.355Z,1520501890.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:10.753Z,1520501890.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:11.155Z,1520501891.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:11.555Z,1520501891.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:11.953Z,1520501891.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:12.362Z,1520501892.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:12.766Z,1520501892.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:15.853Z,1520501895.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:15.974Z,1520501895.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:16.350Z,1520501896.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:16.722Z,1520501896.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:17.118Z,1520501897.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:17.550Z,1520501897.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:17.923Z,1520501897.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:18.350Z,1520501898.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:18.721Z,1520501898.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:19.121Z,1520501899.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:19.519Z,1520501899.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:19.923Z,1520501899.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:20.329Z,1520501900.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:20.728Z,1520501900.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:21.136Z,1520501901.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:21.534Z,1520501901.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:21.933Z,1520501901.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:22.334Z,1520501902.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:22.737Z,1520501902.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:23.108Z,1520501903.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:23.542Z,1520501903.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:23.939Z,1520501903.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:24.343Z,1520501904.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:24.735Z,1520501904.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:25.143Z,1520501905.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:25.515Z,1520501905.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:25.922Z,1520501905.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:26.328Z,1520501906.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:26.724Z,1520501906.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:27.150Z,1520501907.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:27.521Z,1520501907.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:27.921Z,1520501907.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:28.321Z,1520501908.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:28.719Z,1520501908.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:29.126Z,1520501909.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:29.550Z,1520501909.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:29.928Z,1520501909.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:30.350Z,1520501910.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:30.721Z,1520501910.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:31.122Z,1520501911.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:31.524Z,1520501911.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:31.924Z,1520501911.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:32.351Z,1520501912.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:32.725Z,1520501912.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:33.150Z,1520501913.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:33.518Z,1520501913.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:33.919Z,1520501913.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:34.323Z,1520501914.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:34.724Z,1520501914.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:35.117Z,1520501915.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:35.550Z,1520501915.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:35.927Z,1520501915.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:36.351Z,1520501916.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:36.726Z,1520501916.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:37.122Z,1520501917.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:37.530Z,1520501917.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:37.924Z,1520501917.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:38.336Z,1520501918.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:38.730Z,1520501918.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:39.153Z,1520501919.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:39.524Z,1520501919.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:39.923Z,1520501919.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:40.331Z,1520501920.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:40.723Z,1520501920.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:41.123Z,1520501921.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:41.534Z,1520501921.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:41.931Z,1520501921.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:42.333Z,1520501922.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:42.722Z,1520501922.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:43.123Z,1520501923.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:43.534Z,1520501923.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:43.934Z,1520501923.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:44.339Z,1520501924.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:44.736Z,1520501924.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:45.135Z,1520501925.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:45.534Z,1520501925.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:45.908Z,1520501925.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:46.335Z,1520501926.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:46.743Z,1520501926.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:47.119Z,1520501927.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:47.550Z,1520501927.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:47.932Z,1520501927.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:48.349Z,1520501928.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:48.722Z,1520501928.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:49.126Z,1520501929.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:49.519Z,1520501929.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:49.923Z,1520501929.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:50.324Z,1520501930.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:50.736Z,1520501930.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:51.134Z,1520501931.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:51.523Z,1520501931.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:51.921Z,1520501931.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:52.332Z,1520501932.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:52.727Z,1520501932.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:53.121Z,1520501933.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:53.531Z,1520501933.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:53.936Z,1520501933.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:54.331Z,1520501934.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:54.722Z,1520501934.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:55.126Z,1520501935.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:55.528Z,1520501935.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:55.930Z,1520501935.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:56.332Z,1520501936.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:56.732Z,1520501936.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:57.138Z,1520501937.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:57.526Z,1520501937.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:57.929Z,1520501937.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:58.325Z,1520501938.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:58.724Z,1520501938.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:59.125Z,1520501939.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:59.535Z,1520501939.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:38:59.936Z,1520501939.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:00.335Z,1520501940.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:00.730Z,1520501940.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:01.123Z,1520501941.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:01.528Z,1520501941.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:01.926Z,1520501941.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:02.336Z,1520501942.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:02.738Z,1520501942.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:03.142Z,1520501943.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:03.527Z,1520501943.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:03.927Z,1520501943.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:04.325Z,1520501944.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:04.724Z,1520501944.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:05.121Z,1520501945.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:05.538Z,1520501945.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:05.942Z,1520501945.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:06.336Z,1520501946.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:06.725Z,1520501946.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:07.125Z,1520501947.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:07.534Z,1520501947.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:07.931Z,1520501947.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:08.337Z,1520501948.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:08.735Z,1520501948.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:09.142Z,1520501949.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:09.527Z,1520501949.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:09.919Z,1520501949.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:10.325Z,1520501950.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:10.727Z,1520501950.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:11.125Z,1520501951.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:11.532Z,1520501951.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:11.937Z,1520501951.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:11.940Z,1520501951.940 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T09:34:11.6Z
2018-03-08T09:39:11.940Z,1520501951.940 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T09:39:11.940Z,1520501951.940 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T09:39:12.336Z,1520501952.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:12.827Z,1520501952.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:13.146Z,1520501953.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:16.227Z,1520501956.227 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:16.227Z,1520501956.227 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39
2018-03-08T09:39:16.227Z,1520501956.227 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T09:39:16.229Z,1520501956.229 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:16.229Z,1520501956.229 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39
2018-03-08T09:39:16.229Z,1520501956.229 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T09:39:16.230Z,1520501956.230 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:16.231Z,1520501956.231 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 39
2018-03-08T09:39:16.231Z,1520501956.231 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T09:39:16.243Z,1520501956.243 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T09:39:16.244Z,1520501956.244 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T09:39:16.244Z,1520501956.244 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T09:39:16.341Z,1520501956.341 [PAR_Licor](INFO): A/D timeout, 2 tries over 130 ms

2018-03-08T09:39:16.341Z,1520501956.341 [PAR_Licor] Data Fault, FailCount= 1
2018-03-08T09:39:16.341Z,1520501956.341 [PAR_Licor](ERROR): Data Fault
2018-03-08T09:39:16.453Z,1520501956.453 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T09:39:16.454Z,1520501956.454 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39
2018-03-08T09:39:16.454Z,1520501956.454 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T09:39:16.454Z,1520501956.454 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39
2018-03-08T09:39:16.455Z,1520501956.455 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T09:39:16.457Z,1520501956.457 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 39
2018-03-08T09:39:16.457Z,1520501956.457 [CBIT](ERROR): Data Fault in component: PAR_Licor
2018-03-08T09:39:16.457Z,1520501956.457 [CBIT](INFO): Clearing failed state for component PAR_Licor
2018-03-08T09:39:16.457Z,1520501956.457 [PAR_Licor] No Fault, FailCount= 1
2018-03-08T09:39:16.660Z,1520501956.660 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0044.lzma
2018-03-08T09:39:16.733Z,1520501956.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T09:39:16.734Z,1520501956.734 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:39:16.734Z,1520501956.734 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:39:16.735Z,1520501956.735 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T09:39:16.735Z,1520501956.735 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:39:16.735Z,1520501956.735 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:39:16.736Z,1520501956.736 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T09:39:16.736Z,1520501956.736 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:39:16.736Z,1520501956.736 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:39:17.134Z,1520501957.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-03-08T09:39:17.135Z,1520501957.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:17.463Z,1520501957.463 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0044.lzma.bak
2018-03-08T09:39:17.463Z,1520501957.463 [DataOverHttps](INFO): SBD MOMSN=7984576
2018-03-08T09:39:17.530Z,1520501957.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-03-08T09:39:17.531Z,1520501957.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:18.088Z,1520501958.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.9 s old, using for 20.0 s.
2018-03-08T09:39:18.089Z,1520501958.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:18.327Z,1520501958.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-03-08T09:39:18.328Z,1520501958.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:18.703Z,1520501958.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-03-08T09:39:18.704Z,1520501958.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:21.843Z,1520501961.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T09:39:21.844Z,1520501961.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:21.978Z,1520501961.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2018-03-08T09:39:21.979Z,1520501961.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:22.380Z,1520501962.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2018-03-08T09:39:22.382Z,1520501962.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:22.752Z,1520501962.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-08T09:39:22.753Z,1520501962.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:23.154Z,1520501963.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-08T09:39:23.156Z,1520501963.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:23.552Z,1520501963.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-08T09:39:23.557Z,1520501963.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:23.953Z,1520501963.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-08T09:39:23.954Z,1520501963.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:27.062Z,1520501967.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T09:39:27.063Z,1520501967.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:27.205Z,1520501967.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2018-03-08T09:39:27.206Z,1520501967.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:27.513Z,1520501967.513 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0045.lzma
2018-03-08T09:39:27.591Z,1520501967.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2018-03-08T09:39:27.592Z,1520501967.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:27.951Z,1520501967.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T09:39:27.953Z,1520501967.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:28.311Z,1520501968.311 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0045.lzma.bak
2018-03-08T09:39:28.311Z,1520501968.311 [DataOverHttps](INFO): SBD MOMSN=7984578
2018-03-08T09:39:28.370Z,1520501968.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T09:39:28.371Z,1520501968.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:28.926Z,1520501968.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2018-03-08T09:39:28.926Z,1520501968.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:28.950Z,1520501968.950 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T09:39:28.950Z,1520501968.950 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T09:39:28.950Z,1520501968.950 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T09:39:29.174Z,1520501969.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-08T09:39:29.175Z,1520501969.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:32.269Z,1520501972.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T09:39:32.270Z,1520501972.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:32.402Z,1520501972.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-03-08T09:39:32.403Z,1520501972.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:32.798Z,1520501972.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-03-08T09:39:32.799Z,1520501972.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:33.197Z,1520501973.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-03-08T09:39:33.199Z,1520501973.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:33.580Z,1520501973.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-03-08T09:39:33.601Z,1520501973.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:33.973Z,1520501973.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T09:39:33.974Z,1520501973.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:34.402Z,1520501974.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-03-08T09:39:34.403Z,1520501974.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:34.806Z,1520501974.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-03-08T09:39:34.807Z,1520501974.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:35.173Z,1520501975.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T09:39:35.174Z,1520501975.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:35.575Z,1520501975.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T09:39:35.576Z,1520501975.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:35.972Z,1520501975.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T09:39:35.973Z,1520501975.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:36.400Z,1520501976.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:36.770Z,1520501976.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:37.177Z,1520501977.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:37.601Z,1520501977.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:38.006Z,1520501978.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:38.367Z,1520501978.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:38.776Z,1520501978.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:39.174Z,1520501979.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:39.606Z,1520501979.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:39.981Z,1520501979.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:40.385Z,1520501980.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:40.776Z,1520501980.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:41.196Z,1520501981.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:41.596Z,1520501981.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:41.987Z,1520501981.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:42.411Z,1520501982.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:42.826Z,1520501982.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:43.186Z,1520501983.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:43.583Z,1520501983.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:43.982Z,1520501983.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:44.396Z,1520501984.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:44.795Z,1520501984.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:45.188Z,1520501985.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:45.588Z,1520501985.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:46.002Z,1520501986.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:46.391Z,1520501986.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:46.787Z,1520501986.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:47.182Z,1520501987.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:47.589Z,1520501987.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:47.955Z,1520501987.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:48.388Z,1520501988.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:48.789Z,1520501988.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:49.192Z,1520501989.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:49.589Z,1520501989.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:49.961Z,1520501989.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:50.393Z,1520501990.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:50.796Z,1520501990.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:51.167Z,1520501991.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:51.604Z,1520501991.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:52.002Z,1520501992.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:52.393Z,1520501992.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:52.756Z,1520501992.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:53.166Z,1520501993.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:53.570Z,1520501993.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:53.956Z,1520501993.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:54.390Z,1520501994.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:54.783Z,1520501994.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:55.173Z,1520501995.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:55.579Z,1520501995.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:55.971Z,1520501995.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:56.379Z,1520501996.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:56.778Z,1520501996.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:57.185Z,1520501997.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:57.585Z,1520501997.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:57.983Z,1520501997.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:58.383Z,1520501998.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:58.802Z,1520501998.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:59.171Z,1520501999.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:59.581Z,1520501999.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:39:59.971Z,1520501999.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:00.403Z,1520502000.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:00.786Z,1520502000.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:01.189Z,1520502001.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:01.583Z,1520502001.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:02.016Z,1520502002.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:02.370Z,1520502002.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:02.784Z,1520502002.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:03.179Z,1520502003.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:03.607Z,1520502003.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:03.988Z,1520502003.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:04.387Z,1520502004.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:04.787Z,1520502004.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:05.194Z,1520502005.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:05.576Z,1520502005.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:05.986Z,1520502005.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:06.389Z,1520502006.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:06.798Z,1520502006.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:07.183Z,1520502007.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:07.577Z,1520502007.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:07.982Z,1520502007.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:08.373Z,1520502008.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:08.772Z,1520502008.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:09.177Z,1520502009.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:09.590Z,1520502009.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:10.018Z,1520502010.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:10.399Z,1520502010.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:10.780Z,1520502010.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:11.183Z,1520502011.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:11.593Z,1520502011.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:11.955Z,1520502011.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:12.394Z,1520502012.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:12.790Z,1520502012.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:13.184Z,1520502013.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:13.586Z,1520502013.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:13.987Z,1520502013.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:14.381Z,1520502014.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:14.791Z,1520502014.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:15.197Z,1520502015.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:15.589Z,1520502015.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:15.998Z,1520502015.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:16.399Z,1520502016.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:16.788Z,1520502016.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:17.187Z,1520502017.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:17.584Z,1520502017.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:17.983Z,1520502017.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:18.392Z,1520502018.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:18.795Z,1520502018.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:19.178Z,1520502019.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:19.592Z,1520502019.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:19.989Z,1520502019.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:20.384Z,1520502020.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:20.791Z,1520502020.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:21.171Z,1520502021.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:21.595Z,1520502021.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:21.993Z,1520502021.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:22.406Z,1520502022.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:22.807Z,1520502022.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:23.199Z,1520502023.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:23.579Z,1520502023.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:23.983Z,1520502023.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:24.394Z,1520502024.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:24.793Z,1520502024.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:25.185Z,1520502025.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:25.577Z,1520502025.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:25.985Z,1520502025.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:26.376Z,1520502026.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:26.778Z,1520502026.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:27.180Z,1520502027.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:27.613Z,1520502027.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:27.991Z,1520502027.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:28.395Z,1520502028.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:28.780Z,1520502028.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:29.191Z,1520502029.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:29.581Z,1520502029.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:32.668Z,1520502032.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:32.800Z,1520502032.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:33.176Z,1520502033.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:33.551Z,1520502033.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:33.937Z,1520502033.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:34.343Z,1520502034.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:34.744Z,1520502034.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:35.137Z,1520502035.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:35.555Z,1520502035.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:35.948Z,1520502035.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:36.350Z,1520502036.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:36.750Z,1520502036.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:37.140Z,1520502037.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:37.551Z,1520502037.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:37.943Z,1520502037.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:38.350Z,1520502038.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:38.749Z,1520502038.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:39.147Z,1520502039.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:39.543Z,1520502039.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:39.947Z,1520502039.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:40.346Z,1520502040.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:40.739Z,1520502040.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:41.139Z,1520502041.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:41.548Z,1520502041.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:41.948Z,1520502041.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:42.348Z,1520502042.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:42.738Z,1520502042.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:43.139Z,1520502043.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:43.534Z,1520502043.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:43.942Z,1520502043.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:44.348Z,1520502044.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:44.747Z,1520502044.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:45.148Z,1520502045.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:45.542Z,1520502045.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:45.944Z,1520502045.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:46.347Z,1520502046.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:46.743Z,1520502046.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:47.145Z,1520502047.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:47.548Z,1520502047.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:47.957Z,1520502047.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:48.348Z,1520502048.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:48.750Z,1520502048.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:49.150Z,1520502049.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:49.549Z,1520502049.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:49.946Z,1520502049.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:50.357Z,1520502050.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:50.751Z,1520502050.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:51.150Z,1520502051.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:51.529Z,1520502051.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:51.934Z,1520502051.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:52.339Z,1520502052.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:52.735Z,1520502052.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:53.142Z,1520502053.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:53.550Z,1520502053.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:53.946Z,1520502053.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:54.348Z,1520502054.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:54.741Z,1520502054.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:55.142Z,1520502055.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:55.542Z,1520502055.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:55.941Z,1520502055.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:56.344Z,1520502056.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:56.748Z,1520502056.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:57.148Z,1520502057.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:57.542Z,1520502057.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:57.935Z,1520502057.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:58.340Z,1520502058.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:58.739Z,1520502058.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:59.141Z,1520502059.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:59.548Z,1520502059.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:40:59.948Z,1520502059.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:00.354Z,1520502060.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:00.742Z,1520502060.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:01.142Z,1520502061.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:01.542Z,1520502061.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:01.941Z,1520502061.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:02.357Z,1520502062.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:02.747Z,1520502062.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:03.148Z,1520502063.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:03.544Z,1520502063.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:03.937Z,1520502063.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:04.339Z,1520502064.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:04.751Z,1520502064.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:05.141Z,1520502065.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:05.557Z,1520502065.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:05.957Z,1520502065.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:06.356Z,1520502066.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:06.743Z,1520502066.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:07.143Z,1520502067.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:07.543Z,1520502067.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:07.945Z,1520502067.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:08.353Z,1520502068.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:08.751Z,1520502068.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:09.148Z,1520502069.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:09.547Z,1520502069.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:09.949Z,1520502069.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:10.342Z,1520502070.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:10.731Z,1520502070.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:11.155Z,1520502071.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:11.560Z,1520502071.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:11.964Z,1520502071.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:12.356Z,1520502072.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:12.758Z,1520502072.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:13.142Z,1520502073.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:13.539Z,1520502073.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:13.941Z,1520502073.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:14.371Z,1520502074.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:14.769Z,1520502074.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:15.149Z,1520502075.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:15.544Z,1520502075.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:15.943Z,1520502075.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:16.343Z,1520502076.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:16.741Z,1520502076.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:17.135Z,1520502077.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:17.554Z,1520502077.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:17.949Z,1520502077.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:18.344Z,1520502078.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:18.742Z,1520502078.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:19.135Z,1520502079.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:19.544Z,1520502079.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:19.957Z,1520502079.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:20.359Z,1520502080.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:20.755Z,1520502080.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:21.152Z,1520502081.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:21.544Z,1520502081.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:21.935Z,1520502081.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:22.346Z,1520502082.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:22.744Z,1520502082.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:23.141Z,1520502083.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:23.558Z,1520502083.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:23.955Z,1520502083.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:24.359Z,1520502084.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:24.742Z,1520502084.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:25.142Z,1520502085.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:25.543Z,1520502085.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:25.954Z,1520502085.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:26.354Z,1520502086.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:26.756Z,1520502086.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:27.154Z,1520502087.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:27.546Z,1520502087.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:27.944Z,1520502087.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:28.346Z,1520502088.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:28.746Z,1520502088.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:29.143Z,1520502089.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:29.549Z,1520502089.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:29.955Z,1520502089.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:33.060Z,1520502093.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:33.199Z,1520502093.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:33.555Z,1520502093.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:33.945Z,1520502093.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:34.356Z,1520502094.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:34.757Z,1520502094.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:35.158Z,1520502095.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:35.561Z,1520502095.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:35.970Z,1520502095.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:36.370Z,1520502096.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:36.757Z,1520502096.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:37.141Z,1520502097.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:37.567Z,1520502097.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:37.946Z,1520502097.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:38.355Z,1520502098.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:38.752Z,1520502098.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:39.151Z,1520502099.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:39.549Z,1520502099.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:39.951Z,1520502099.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:40.342Z,1520502100.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:40.764Z,1520502100.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:41.151Z,1520502101.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:41.553Z,1520502101.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:41.968Z,1520502101.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:42.028Z,1520502102.028 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T09:41:42.371Z,1520502102.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:42.754Z,1520502102.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:43.137Z,1520502103.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:43.538Z,1520502103.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:43.950Z,1520502103.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:44.364Z,1520502104.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:44.795Z,1520502104.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:45.157Z,1520502105.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:45.562Z,1520502105.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:45.953Z,1520502105.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:46.342Z,1520502106.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:46.761Z,1520502106.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:47.163Z,1520502107.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:47.563Z,1520502107.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:47.976Z,1520502107.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:48.363Z,1520502108.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:48.761Z,1520502108.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:49.141Z,1520502109.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:49.562Z,1520502109.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:49.947Z,1520502109.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:50.376Z,1520502110.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:50.756Z,1520502110.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:51.181Z,1520502111.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:51.548Z,1520502111.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:51.947Z,1520502111.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:52.403Z,1520502112.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:52.774Z,1520502112.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:53.177Z,1520502113.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:53.552Z,1520502113.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:53.956Z,1520502113.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:54.351Z,1520502114.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:54.750Z,1520502114.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:55.151Z,1520502115.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:55.553Z,1520502115.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:55.957Z,1520502115.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:56.382Z,1520502116.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:56.740Z,1520502116.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:57.170Z,1520502117.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:57.561Z,1520502117.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:57.940Z,1520502117.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:58.370Z,1520502118.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:58.775Z,1520502118.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:59.157Z,1520502119.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:59.544Z,1520502119.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:41:59.948Z,1520502119.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:00.344Z,1520502120.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:00.747Z,1520502120.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:01.146Z,1520502121.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:01.578Z,1520502121.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:01.952Z,1520502121.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:02.384Z,1520502122.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:02.747Z,1520502122.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:03.145Z,1520502123.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:03.547Z,1520502123.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:03.945Z,1520502123.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:04.349Z,1520502124.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:04.781Z,1520502124.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:05.147Z,1520502125.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:05.544Z,1520502125.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:05.953Z,1520502125.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:06.342Z,1520502126.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:06.748Z,1520502126.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:07.146Z,1520502127.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:07.577Z,1520502127.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:07.961Z,1520502127.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:08.354Z,1520502128.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:08.749Z,1520502128.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:09.150Z,1520502129.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:09.551Z,1520502129.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:09.955Z,1520502129.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:10.355Z,1520502130.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:10.762Z,1520502130.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:11.151Z,1520502131.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:11.550Z,1520502131.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:11.946Z,1520502131.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:12.345Z,1520502132.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:12.747Z,1520502132.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:13.146Z,1520502133.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:13.556Z,1520502133.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:13.955Z,1520502133.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:14.366Z,1520502134.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:14.743Z,1520502134.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:15.147Z,1520502135.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:15.548Z,1520502135.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:15.946Z,1520502135.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:16.355Z,1520502136.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:16.762Z,1520502136.762 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:16.762Z,1520502136.762 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40
2018-03-08T09:42:16.762Z,1520502136.762 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T09:42:16.764Z,1520502136.764 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:16.764Z,1520502136.764 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40
2018-03-08T09:42:16.764Z,1520502136.764 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T09:42:16.766Z,1520502136.766 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:16.766Z,1520502136.766 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 40
2018-03-08T09:42:16.766Z,1520502136.766 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T09:42:16.813Z,1520502136.813 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T09:42:16.813Z,1520502136.813 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T09:42:16.813Z,1520502136.813 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T09:42:17.166Z,1520502137.166 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T09:42:17.166Z,1520502137.166 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40
2018-03-08T09:42:17.167Z,1520502137.167 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T09:42:17.167Z,1520502137.167 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40
2018-03-08T09:42:17.167Z,1520502137.167 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T09:42:17.168Z,1520502137.168 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 40
2018-03-08T09:42:17.563Z,1520502137.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T09:42:17.563Z,1520502137.563 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:42:17.564Z,1520502137.564 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:42:17.564Z,1520502137.564 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T09:42:17.565Z,1520502137.565 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:42:17.565Z,1520502137.565 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:42:17.565Z,1520502137.565 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T09:42:17.566Z,1520502137.566 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:42:17.566Z,1520502137.566 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:42:17.953Z,1520502137.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T09:42:17.954Z,1520502137.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:18.352Z,1520502138.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T09:42:18.353Z,1520502138.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:18.748Z,1520502138.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T09:42:18.749Z,1520502138.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:19.147Z,1520502139.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T09:42:19.148Z,1520502139.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:19.557Z,1520502139.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T09:42:19.558Z,1520502139.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:19.961Z,1520502139.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T09:42:19.962Z,1520502139.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:20.370Z,1520502140.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T09:42:20.371Z,1520502140.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:20.740Z,1520502140.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T09:42:20.745Z,1520502140.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:21.151Z,1520502141.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T09:42:21.152Z,1520502141.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:21.557Z,1520502141.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T09:42:21.558Z,1520502141.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:21.954Z,1520502141.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T09:42:21.955Z,1520502141.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:22.364Z,1520502142.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T09:42:22.365Z,1520502142.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:22.766Z,1520502142.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T09:42:22.767Z,1520502142.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:23.157Z,1520502143.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T09:42:23.158Z,1520502143.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:23.553Z,1520502143.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T09:42:23.554Z,1520502143.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:23.954Z,1520502143.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T09:42:23.955Z,1520502143.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:24.357Z,1520502144.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T09:42:24.358Z,1520502144.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:24.753Z,1520502144.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T09:42:24.754Z,1520502144.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:25.154Z,1520502145.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T09:42:25.155Z,1520502145.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:25.564Z,1520502145.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T09:42:25.565Z,1520502145.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:25.962Z,1520502145.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T09:42:25.963Z,1520502145.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:26.365Z,1520502146.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T09:42:26.366Z,1520502146.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:26.751Z,1520502146.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T09:42:26.752Z,1520502146.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:27.161Z,1520502147.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T09:42:27.163Z,1520502147.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:27.550Z,1520502147.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T09:42:27.551Z,1520502147.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:27.935Z,1520502147.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T09:42:27.937Z,1520502147.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:28.362Z,1520502148.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T09:42:28.363Z,1520502148.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:28.774Z,1520502148.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T09:42:28.775Z,1520502148.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:29.166Z,1520502149.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T09:42:29.167Z,1520502149.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:29.565Z,1520502149.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T09:42:29.565Z,1520502149.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:29.943Z,1520502149.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T09:42:29.943Z,1520502149.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:33.417Z,1520502153.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2018-03-08T09:42:33.418Z,1520502153.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:33.542Z,1520502153.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T09:42:33.543Z,1520502153.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:33.912Z,1520502153.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2018-03-08T09:42:33.913Z,1520502153.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:34.314Z,1520502154.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T09:42:34.315Z,1520502154.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:34.712Z,1520502154.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T09:42:34.713Z,1520502154.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:35.108Z,1520502155.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-03-08T09:42:35.109Z,1520502155.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:35.502Z,1520502155.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-03-08T09:42:35.503Z,1520502155.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:35.893Z,1520502155.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-03-08T09:42:35.894Z,1520502155.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:36.303Z,1520502156.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-03-08T09:42:36.304Z,1520502156.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:36.706Z,1520502156.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-03-08T09:42:36.707Z,1520502156.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:37.104Z,1520502157.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:37.495Z,1520502157.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:37.888Z,1520502157.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:38.296Z,1520502158.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:38.697Z,1520502158.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:39.098Z,1520502159.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:39.502Z,1520502159.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:39.905Z,1520502159.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:40.315Z,1520502160.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:40.702Z,1520502160.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:41.096Z,1520502161.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:41.497Z,1520502161.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:41.894Z,1520502161.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:42.308Z,1520502162.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:42.708Z,1520502162.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:43.109Z,1520502163.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:43.497Z,1520502163.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:43.876Z,1520502163.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:44.301Z,1520502164.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:44.704Z,1520502164.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:45.077Z,1520502165.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:45.506Z,1520502165.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:45.914Z,1520502165.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:46.302Z,1520502166.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:46.682Z,1520502166.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:47.086Z,1520502167.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:47.480Z,1520502167.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:47.907Z,1520502167.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:48.254Z,1520502168.254 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T09:42:48.255Z,1520502168.255 [NAL9602] Data Fault, FailCount= 2
2018-03-08T09:42:48.255Z,1520502168.255 [NAL9602](ERROR): Data Fault
2018-03-08T09:42:48.286Z,1520502168.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:48.326Z,1520502168.326 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T09:42:48.651Z,1520502168.651 [NAL9602](INFO): Powering down
2018-03-08T09:42:48.684Z,1520502168.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:49.086Z,1520502169.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:49.489Z,1520502169.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:49.529Z,1520502169.529 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T09:42:49.530Z,1520502169.530 [NAL9602] No Fault, FailCount= 2
2018-03-08T09:42:49.887Z,1520502169.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:50.289Z,1520502170.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:50.690Z,1520502170.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:51.081Z,1520502171.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:51.490Z,1520502171.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:51.886Z,1520502171.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:52.284Z,1520502172.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:52.691Z,1520502172.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:53.086Z,1520502173.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:53.486Z,1520502173.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:53.895Z,1520502173.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:54.290Z,1520502174.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:54.687Z,1520502174.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:55.090Z,1520502175.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:55.490Z,1520502175.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:55.883Z,1520502175.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:56.290Z,1520502176.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:56.698Z,1520502176.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:57.083Z,1520502177.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:57.491Z,1520502177.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:57.890Z,1520502177.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:58.285Z,1520502178.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:58.695Z,1520502178.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:59.086Z,1520502179.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:59.488Z,1520502179.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:42:59.894Z,1520502179.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:00.287Z,1520502180.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:00.690Z,1520502180.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:01.090Z,1520502181.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:01.494Z,1520502181.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:01.885Z,1520502181.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:02.291Z,1520502182.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:02.690Z,1520502182.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:03.086Z,1520502183.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:03.488Z,1520502183.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:03.890Z,1520502183.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:04.286Z,1520502184.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:04.698Z,1520502184.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:05.094Z,1520502185.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:05.487Z,1520502185.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:05.887Z,1520502185.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:06.292Z,1520502186.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:06.691Z,1520502186.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:07.093Z,1520502187.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:07.492Z,1520502187.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:07.891Z,1520502187.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:08.297Z,1520502188.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:08.699Z,1520502188.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:09.093Z,1520502189.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:09.489Z,1520502189.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:09.893Z,1520502189.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:10.291Z,1520502190.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:10.695Z,1520502190.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:11.097Z,1520502191.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:11.490Z,1520502191.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:11.890Z,1520502191.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:12.301Z,1520502192.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:12.696Z,1520502192.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:13.097Z,1520502193.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:13.495Z,1520502193.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:13.899Z,1520502193.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:14.287Z,1520502194.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:14.701Z,1520502194.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:15.104Z,1520502195.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:15.475Z,1520502195.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:15.883Z,1520502195.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:16.285Z,1520502196.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:16.683Z,1520502196.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:17.107Z,1520502197.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:17.510Z,1520502197.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:17.878Z,1520502197.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:18.286Z,1520502198.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:18.682Z,1520502198.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:19.047Z,1520502199.047 [NAL9602](INFO): Powering up NAL9602
2018-03-08T09:43:19.086Z,1520502199.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:19.490Z,1520502199.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:19.889Z,1520502199.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:20.282Z,1520502200.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:20.690Z,1520502200.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:21.088Z,1520502201.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:21.482Z,1520502201.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:21.914Z,1520502201.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:22.290Z,1520502202.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:22.691Z,1520502202.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:23.088Z,1520502203.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:23.490Z,1520502203.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:23.883Z,1520502203.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:24.291Z,1520502204.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:24.690Z,1520502204.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:25.089Z,1520502205.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:25.492Z,1520502205.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:25.890Z,1520502205.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:26.287Z,1520502206.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:26.694Z,1520502206.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:27.090Z,1520502207.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:27.484Z,1520502207.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:27.894Z,1520502207.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:28.290Z,1520502208.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:28.687Z,1520502208.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:29.091Z,1520502209.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:29.521Z,1520502209.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:29.846Z,1520502209.846 [NAL9602](INFO): NAL9602 initialized
2018-03-08T09:43:29.899Z,1520502209.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:30.298Z,1520502210.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:33.417Z,1520502213.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:33.550Z,1520502213.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:33.904Z,1520502213.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:34.296Z,1520502214.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:34.695Z,1520502214.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:35.100Z,1520502215.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:35.506Z,1520502215.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:35.912Z,1520502215.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:36.308Z,1520502216.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:36.708Z,1520502216.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:37.103Z,1520502217.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:37.503Z,1520502217.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:37.910Z,1520502217.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:38.302Z,1520502218.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:38.699Z,1520502218.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:39.110Z,1520502219.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:39.508Z,1520502219.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:39.915Z,1520502219.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:40.303Z,1520502220.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:40.702Z,1520502220.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:41.104Z,1520502221.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:41.498Z,1520502221.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:41.931Z,1520502221.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:42.346Z,1520502222.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:42.732Z,1520502222.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:43.104Z,1520502223.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:43.499Z,1520502223.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:43.899Z,1520502223.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:44.299Z,1520502224.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:44.703Z,1520502224.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:45.117Z,1520502225.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:45.515Z,1520502225.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:45.916Z,1520502225.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:46.302Z,1520502226.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:46.695Z,1520502226.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:47.102Z,1520502227.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:47.502Z,1520502227.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:47.912Z,1520502227.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:48.313Z,1520502228.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:48.711Z,1520502228.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:49.107Z,1520502229.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:49.511Z,1520502229.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:49.914Z,1520502229.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:50.313Z,1520502230.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:50.718Z,1520502230.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:51.102Z,1520502231.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:51.502Z,1520502231.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:51.906Z,1520502231.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:52.306Z,1520502232.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:52.705Z,1520502232.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:53.112Z,1520502233.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:53.522Z,1520502233.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:53.913Z,1520502233.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:54.309Z,1520502234.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:54.706Z,1520502234.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:55.106Z,1520502235.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:55.512Z,1520502235.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:55.914Z,1520502235.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:56.314Z,1520502236.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:56.718Z,1520502236.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:57.110Z,1520502237.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:57.485Z,1520502237.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:57.914Z,1520502237.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:58.318Z,1520502238.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:58.711Z,1520502238.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:59.091Z,1520502239.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:59.514Z,1520502239.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:43:59.910Z,1520502239.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:00.322Z,1520502240.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:00.722Z,1520502240.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:01.091Z,1520502241.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:01.493Z,1520502241.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:01.915Z,1520502241.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:02.319Z,1520502242.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:02.722Z,1520502242.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:03.095Z,1520502243.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:03.498Z,1520502243.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:03.891Z,1520502243.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:04.299Z,1520502244.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:04.699Z,1520502244.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:05.125Z,1520502245.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:05.500Z,1520502245.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:05.921Z,1520502245.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:06.297Z,1520502246.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:06.699Z,1520502246.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:07.093Z,1520502247.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:07.497Z,1520502247.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:07.921Z,1520502247.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:08.316Z,1520502248.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:08.728Z,1520502248.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:09.098Z,1520502249.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:09.493Z,1520502249.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:09.898Z,1520502249.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:10.296Z,1520502250.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:10.693Z,1520502250.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:11.128Z,1520502251.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:11.508Z,1520502251.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:11.912Z,1520502251.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:12.302Z,1520502252.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:12.702Z,1520502252.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:13.101Z,1520502253.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:13.499Z,1520502253.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:13.905Z,1520502253.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:14.308Z,1520502254.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:14.714Z,1520502254.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:15.099Z,1520502255.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:15.499Z,1520502255.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:15.898Z,1520502255.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:16.302Z,1520502256.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:16.701Z,1520502256.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:17.104Z,1520502257.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:17.510Z,1520502257.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:17.907Z,1520502257.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:18.310Z,1520502258.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:18.699Z,1520502258.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:19.098Z,1520502259.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:19.503Z,1520502259.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:19.907Z,1520502259.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:20.308Z,1520502260.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:20.714Z,1520502260.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:21.106Z,1520502261.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:21.501Z,1520502261.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:21.908Z,1520502261.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:22.309Z,1520502262.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:22.705Z,1520502262.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:23.103Z,1520502263.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:23.502Z,1520502263.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:23.912Z,1520502263.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:24.318Z,1520502264.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:24.711Z,1520502264.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:25.103Z,1520502265.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:25.507Z,1520502265.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:25.901Z,1520502265.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:26.297Z,1520502266.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:26.707Z,1520502266.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:27.118Z,1520502267.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:27.512Z,1520502267.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:27.918Z,1520502267.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:28.298Z,1520502268.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:28.698Z,1520502268.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:29.101Z,1520502269.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:29.507Z,1520502269.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:29.514Z,1520502269.514 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T09:44:29.514Z,1520502269.514 [Default:CheckIn:C.Wait] Stopped
2018-03-08T09:44:29.514Z,1520502269.514 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T09:44:29.514Z,1520502269.514 [Default:CheckIn:D] Running Loop=1
2018-03-08T09:44:29.912Z,1520502269.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:29.915Z,1520502269.915 [Default:CheckIn:D] Stopped
2018-03-08T09:44:29.915Z,1520502269.915 [Default:CheckIn:E] Running Loop=1
2018-03-08T09:44:30.319Z,1520502270.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:30.322Z,1520502270.322 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 118.751831 min 
2018-03-08T09:44:30.322Z,1520502270.322 [Default:CheckIn:E] Stopped
2018-03-08T09:44:30.322Z,1520502270.322 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T09:44:30.322Z,1520502270.322 [Default:CheckIn] Stopped
2018-03-08T09:44:30.323Z,1520502270.323 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T09:44:30.323Z,1520502270.323 [Default:CheckIn](INFO): Running loop #12
2018-03-08T09:44:30.323Z,1520502270.323 [Default:CheckIn] Running Loop=12
2018-03-08T09:44:30.323Z,1520502270.323 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T09:44:30.323Z,1520502270.323 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T09:44:33.414Z,1520502273.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:33.552Z,1520502273.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:33.903Z,1520502273.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:34.279Z,1520502274.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:34.687Z,1520502274.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:35.112Z,1520502275.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:35.492Z,1520502275.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:35.914Z,1520502275.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:36.286Z,1520502276.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:36.690Z,1520502276.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:37.087Z,1520502277.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:37.489Z,1520502277.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:37.898Z,1520502277.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:38.296Z,1520502278.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:38.693Z,1520502278.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:39.090Z,1520502279.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:39.487Z,1520502279.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:39.893Z,1520502279.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:40.296Z,1520502280.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:40.694Z,1520502280.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:41.088Z,1520502281.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:41.492Z,1520502281.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:41.893Z,1520502281.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:42.296Z,1520502282.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:42.698Z,1520502282.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:43.094Z,1520502283.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:43.494Z,1520502283.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:43.892Z,1520502283.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:44.296Z,1520502284.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:44.691Z,1520502284.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:45.090Z,1520502285.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:45.490Z,1520502285.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:45.891Z,1520502285.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:46.291Z,1520502286.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:46.693Z,1520502286.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:47.095Z,1520502287.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:47.489Z,1520502287.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:47.893Z,1520502287.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:48.318Z,1520502288.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:48.698Z,1520502288.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:49.089Z,1520502289.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:49.486Z,1520502289.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:49.897Z,1520502289.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:50.293Z,1520502290.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:50.693Z,1520502290.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:51.091Z,1520502291.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:51.489Z,1520502291.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:51.891Z,1520502291.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:52.296Z,1520502292.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:52.699Z,1520502292.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:53.091Z,1520502293.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:53.489Z,1520502293.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:53.893Z,1520502293.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:54.296Z,1520502294.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:54.692Z,1520502294.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:55.098Z,1520502295.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:55.494Z,1520502295.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:55.892Z,1520502295.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:56.296Z,1520502296.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:56.698Z,1520502296.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:57.090Z,1520502297.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:57.489Z,1520502297.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:57.898Z,1520502297.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:58.296Z,1520502298.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:58.693Z,1520502298.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:59.087Z,1520502299.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:59.489Z,1520502299.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:44:59.894Z,1520502299.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:00.296Z,1520502300.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:00.692Z,1520502300.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:01.089Z,1520502301.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:01.487Z,1520502301.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:01.892Z,1520502301.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:02.295Z,1520502302.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:02.693Z,1520502302.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:03.088Z,1520502303.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:03.490Z,1520502303.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:03.893Z,1520502303.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:04.295Z,1520502304.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:04.698Z,1520502304.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:05.091Z,1520502305.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:05.491Z,1520502305.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:05.893Z,1520502305.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:06.297Z,1520502306.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:06.693Z,1520502306.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:07.091Z,1520502307.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:07.492Z,1520502307.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:07.897Z,1520502307.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:08.298Z,1520502308.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:08.693Z,1520502308.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:09.091Z,1520502309.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:09.486Z,1520502309.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:09.894Z,1520502309.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:10.293Z,1520502310.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:10.694Z,1520502310.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:11.090Z,1520502311.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:11.489Z,1520502311.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:11.891Z,1520502311.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:12.296Z,1520502312.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:12.698Z,1520502312.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:13.090Z,1520502313.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:13.489Z,1520502313.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:13.892Z,1520502313.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:14.297Z,1520502314.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:14.693Z,1520502314.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:15.090Z,1520502315.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:15.482Z,1520502315.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:15.891Z,1520502315.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:16.296Z,1520502316.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:16.693Z,1520502316.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:17.089Z,1520502317.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:17.489Z,1520502317.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:17.893Z,1520502317.893 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:17.893Z,1520502317.893 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41
2018-03-08T09:45:17.893Z,1520502317.893 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T09:45:17.895Z,1520502317.895 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:17.895Z,1520502317.895 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41
2018-03-08T09:45:17.895Z,1520502317.895 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T09:45:17.897Z,1520502317.897 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:17.897Z,1520502317.897 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 41
2018-03-08T09:45:17.897Z,1520502317.897 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T09:45:17.933Z,1520502317.933 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T09:45:17.933Z,1520502317.933 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T09:45:17.933Z,1520502317.933 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T09:45:18.305Z,1520502318.305 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T09:45:18.305Z,1520502318.305 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41
2018-03-08T09:45:18.305Z,1520502318.305 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T09:45:18.305Z,1520502318.305 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41
2018-03-08T09:45:18.306Z,1520502318.306 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T09:45:18.306Z,1520502318.306 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 41
2018-03-08T09:45:18.698Z,1520502318.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T09:45:18.699Z,1520502318.699 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:45:18.699Z,1520502318.699 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:45:18.699Z,1520502318.699 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T09:45:18.700Z,1520502318.700 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:45:18.700Z,1520502318.700 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:45:18.700Z,1520502318.700 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T09:45:18.701Z,1520502318.701 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:45:18.701Z,1520502318.701 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:45:19.098Z,1520502319.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T09:45:19.099Z,1520502319.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:19.493Z,1520502319.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T09:45:19.494Z,1520502319.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:19.902Z,1520502319.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T09:45:19.902Z,1520502319.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:20.303Z,1520502320.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T09:45:20.304Z,1520502320.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:20.702Z,1520502320.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T09:45:20.703Z,1520502320.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:21.090Z,1520502321.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T09:45:21.091Z,1520502321.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:21.484Z,1520502321.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T09:45:21.485Z,1520502321.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:21.902Z,1520502321.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T09:45:21.903Z,1520502321.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:22.296Z,1520502322.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T09:45:22.297Z,1520502322.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:22.699Z,1520502322.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T09:45:22.701Z,1520502322.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:23.093Z,1520502323.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T09:45:23.094Z,1520502323.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:23.490Z,1520502323.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T09:45:23.491Z,1520502323.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:23.903Z,1520502323.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T09:45:23.903Z,1520502323.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:24.306Z,1520502324.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T09:45:24.307Z,1520502324.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:24.700Z,1520502324.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T09:45:24.701Z,1520502324.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:25.091Z,1520502325.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T09:45:25.091Z,1520502325.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:25.493Z,1520502325.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T09:45:25.494Z,1520502325.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:25.901Z,1520502325.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T09:45:25.902Z,1520502325.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:26.302Z,1520502326.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T09:45:26.303Z,1520502326.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:26.703Z,1520502326.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T09:45:26.704Z,1520502326.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:27.090Z,1520502327.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T09:45:27.091Z,1520502327.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:27.487Z,1520502327.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T09:45:27.487Z,1520502327.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:27.906Z,1520502327.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T09:45:27.907Z,1520502327.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:28.303Z,1520502328.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T09:45:28.304Z,1520502328.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:28.702Z,1520502328.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T09:45:28.703Z,1520502328.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:29.093Z,1520502329.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T09:45:29.094Z,1520502329.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:29.489Z,1520502329.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T09:45:29.490Z,1520502329.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:29.893Z,1520502329.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T09:45:29.894Z,1520502329.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:30.302Z,1520502330.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T09:45:30.303Z,1520502330.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:30.704Z,1520502330.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T09:45:30.705Z,1520502330.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:33.816Z,1520502333.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2018-03-08T09:45:33.838Z,1520502333.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:33.950Z,1520502333.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T09:45:33.951Z,1520502333.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:34.331Z,1520502334.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T09:45:34.332Z,1520502334.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:34.716Z,1520502334.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T09:45:34.733Z,1520502334.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:35.120Z,1520502335.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T09:45:35.137Z,1520502335.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:35.509Z,1520502335.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T09:45:35.510Z,1520502335.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:35.903Z,1520502335.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T09:45:35.904Z,1520502335.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:36.306Z,1520502336.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T09:45:36.307Z,1520502336.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:36.705Z,1520502336.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T09:45:36.705Z,1520502336.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:37.111Z,1520502337.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T09:45:37.113Z,1520502337.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:37.513Z,1520502337.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T09:45:37.514Z,1520502337.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:37.918Z,1520502337.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:38.305Z,1520502338.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:38.706Z,1520502338.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:39.109Z,1520502339.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:39.504Z,1520502339.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:39.942Z,1520502339.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:40.323Z,1520502340.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:40.721Z,1520502340.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:41.113Z,1520502341.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:41.514Z,1520502341.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:41.903Z,1520502341.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:42.313Z,1520502342.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:42.713Z,1520502342.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:43.116Z,1520502343.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:43.521Z,1520502343.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:43.920Z,1520502343.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:44.310Z,1520502344.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:44.717Z,1520502344.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:45.118Z,1520502345.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:45.496Z,1520502345.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:45.930Z,1520502345.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:46.323Z,1520502346.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:46.725Z,1520502346.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:47.119Z,1520502347.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:47.499Z,1520502347.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:47.896Z,1520502347.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:48.315Z,1520502348.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:48.706Z,1520502348.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:49.106Z,1520502349.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:49.534Z,1520502349.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:49.929Z,1520502349.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:50.307Z,1520502350.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:50.710Z,1520502350.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:51.107Z,1520502351.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:51.499Z,1520502351.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:51.934Z,1520502351.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:52.332Z,1520502352.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:52.735Z,1520502352.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:53.131Z,1520502353.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:53.506Z,1520502353.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:53.903Z,1520502353.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:54.303Z,1520502354.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:54.706Z,1520502354.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:55.104Z,1520502355.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:55.516Z,1520502355.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:55.934Z,1520502355.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:56.304Z,1520502356.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:56.707Z,1520502356.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:57.106Z,1520502357.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:57.500Z,1520502357.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:57.912Z,1520502357.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:58.335Z,1520502358.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:58.709Z,1520502358.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:59.114Z,1520502359.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:59.507Z,1520502359.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:45:59.909Z,1520502359.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:00.312Z,1520502360.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:00.734Z,1520502360.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:01.100Z,1520502361.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:01.507Z,1520502361.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:01.904Z,1520502361.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:02.307Z,1520502362.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:02.707Z,1520502362.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:03.137Z,1520502363.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:03.513Z,1520502363.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:03.913Z,1520502363.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:04.306Z,1520502364.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:04.703Z,1520502364.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:05.107Z,1520502365.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:05.505Z,1520502365.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:05.912Z,1520502365.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:06.316Z,1520502366.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:06.714Z,1520502366.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:07.104Z,1520502367.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:07.511Z,1520502367.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:07.908Z,1520502367.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:08.311Z,1520502368.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:08.709Z,1520502368.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:09.112Z,1520502369.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:09.511Z,1520502369.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:09.913Z,1520502369.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:10.310Z,1520502370.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:10.709Z,1520502370.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:11.110Z,1520502371.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:11.514Z,1520502371.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:11.912Z,1520502371.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:12.317Z,1520502372.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:12.712Z,1520502372.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:13.105Z,1520502373.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:13.505Z,1520502373.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:13.906Z,1520502373.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:14.303Z,1520502374.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:14.708Z,1520502374.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:15.122Z,1520502375.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:15.513Z,1520502375.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:15.915Z,1520502375.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:16.310Z,1520502376.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:16.707Z,1520502376.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:17.107Z,1520502377.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:17.514Z,1520502377.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:17.918Z,1520502377.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:18.326Z,1520502378.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:18.720Z,1520502378.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:19.111Z,1520502379.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:19.510Z,1520502379.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:19.908Z,1520502379.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:20.307Z,1520502380.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:20.708Z,1520502380.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:21.116Z,1520502381.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:21.517Z,1520502381.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:21.924Z,1520502381.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:22.319Z,1520502382.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:22.711Z,1520502382.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:23.118Z,1520502383.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:23.515Z,1520502383.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:23.931Z,1520502383.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:24.323Z,1520502384.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:24.731Z,1520502384.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:25.115Z,1520502385.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:25.503Z,1520502385.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:25.926Z,1520502385.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:26.300Z,1520502386.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:26.704Z,1520502386.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:27.133Z,1520502387.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:27.530Z,1520502387.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:27.938Z,1520502387.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:28.304Z,1520502388.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:28.703Z,1520502388.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:29.108Z,1520502389.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:29.508Z,1520502389.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:29.934Z,1520502389.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:30.333Z,1520502390.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:30.737Z,1520502390.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:33.806Z,1520502393.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:33.939Z,1520502393.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:34.295Z,1520502394.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:34.693Z,1520502394.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:35.095Z,1520502395.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:35.491Z,1520502395.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:35.892Z,1520502395.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:36.283Z,1520502396.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:36.699Z,1520502396.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:37.101Z,1520502397.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:37.480Z,1520502397.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:37.897Z,1520502397.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:38.274Z,1520502398.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:38.671Z,1520502398.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:39.079Z,1520502399.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:39.477Z,1520502399.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:39.903Z,1520502399.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:40.304Z,1520502400.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:40.709Z,1520502400.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:41.076Z,1520502401.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:41.477Z,1520502401.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:41.884Z,1520502401.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:42.284Z,1520502402.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:42.706Z,1520502402.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:43.078Z,1520502403.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:43.479Z,1520502403.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:43.885Z,1520502403.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:44.287Z,1520502404.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:44.685Z,1520502404.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:45.086Z,1520502405.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:45.486Z,1520502405.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:45.894Z,1520502405.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:46.288Z,1520502406.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:46.694Z,1520502406.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:47.083Z,1520502407.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:47.477Z,1520502407.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:47.894Z,1520502407.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:48.286Z,1520502408.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:48.688Z,1520502408.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:49.079Z,1520502409.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:49.477Z,1520502409.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:49.888Z,1520502409.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:50.288Z,1520502410.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:50.688Z,1520502410.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:51.087Z,1520502411.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:51.490Z,1520502411.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:51.894Z,1520502411.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:52.288Z,1520502412.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:52.688Z,1520502412.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:53.082Z,1520502413.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:53.479Z,1520502413.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:53.888Z,1520502413.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:54.287Z,1520502414.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:54.687Z,1520502414.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:55.084Z,1520502415.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:55.481Z,1520502415.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:55.888Z,1520502415.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:56.293Z,1520502416.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:56.694Z,1520502416.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:57.083Z,1520502417.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:57.479Z,1520502417.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:57.887Z,1520502417.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:58.288Z,1520502418.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:58.689Z,1520502418.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:59.083Z,1520502419.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:59.480Z,1520502419.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:46:59.918Z,1520502419.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:00.288Z,1520502420.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:00.689Z,1520502420.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:01.086Z,1520502421.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:01.490Z,1520502421.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:01.889Z,1520502421.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:02.294Z,1520502422.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:02.694Z,1520502422.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:03.079Z,1520502423.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:03.487Z,1520502423.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:03.891Z,1520502423.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:04.288Z,1520502424.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:04.689Z,1520502424.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:05.085Z,1520502425.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:05.483Z,1520502425.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:05.889Z,1520502425.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:06.289Z,1520502426.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:06.688Z,1520502426.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:07.085Z,1520502427.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:07.478Z,1520502427.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:07.889Z,1520502427.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:08.289Z,1520502428.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:08.687Z,1520502428.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:09.080Z,1520502429.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:09.482Z,1520502429.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:09.894Z,1520502429.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:10.291Z,1520502430.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:10.692Z,1520502430.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:11.083Z,1520502431.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:11.482Z,1520502431.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:11.889Z,1520502431.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:12.291Z,1520502432.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:12.691Z,1520502432.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:13.083Z,1520502433.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:13.486Z,1520502433.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:13.899Z,1520502433.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:14.295Z,1520502434.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:14.698Z,1520502434.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:15.083Z,1520502435.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:15.487Z,1520502435.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:15.894Z,1520502435.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:16.295Z,1520502436.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:16.689Z,1520502436.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:17.083Z,1520502437.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:17.494Z,1520502437.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:17.893Z,1520502437.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:18.355Z,1520502438.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:18.692Z,1520502438.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:19.085Z,1520502439.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:19.480Z,1520502439.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:19.889Z,1520502439.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:20.288Z,1520502440.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:20.692Z,1520502440.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:21.128Z,1520502441.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:21.481Z,1520502441.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:21.892Z,1520502441.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:22.296Z,1520502442.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:22.689Z,1520502442.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:23.085Z,1520502443.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:23.487Z,1520502443.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:23.893Z,1520502443.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:24.297Z,1520502444.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:24.691Z,1520502444.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:25.093Z,1520502445.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:25.489Z,1520502445.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:25.894Z,1520502445.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:26.298Z,1520502446.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:26.692Z,1520502446.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:27.089Z,1520502447.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:27.490Z,1520502447.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:27.892Z,1520502447.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:28.302Z,1520502448.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:28.694Z,1520502448.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:29.089Z,1520502449.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:29.489Z,1520502449.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:29.894Z,1520502449.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:30.293Z,1520502450.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:30.692Z,1520502450.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:31.092Z,1520502451.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:34.187Z,1520502454.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:34.334Z,1520502454.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:34.694Z,1520502454.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:35.088Z,1520502455.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:35.471Z,1520502455.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:35.869Z,1520502455.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:36.267Z,1520502456.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:36.670Z,1520502456.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:37.098Z,1520502457.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:37.493Z,1520502457.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:37.895Z,1520502457.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:38.268Z,1520502458.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:38.674Z,1520502458.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:39.074Z,1520502459.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:39.468Z,1520502459.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:39.901Z,1520502459.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:40.280Z,1520502460.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:40.699Z,1520502460.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:41.072Z,1520502461.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:41.478Z,1520502461.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:41.876Z,1520502461.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:42.284Z,1520502462.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:42.677Z,1520502462.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:43.073Z,1520502463.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:43.469Z,1520502463.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:43.883Z,1520502463.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:44.279Z,1520502464.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:44.677Z,1520502464.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:45.073Z,1520502465.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:45.476Z,1520502465.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:45.880Z,1520502465.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:46.285Z,1520502466.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:46.680Z,1520502466.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:47.079Z,1520502467.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:47.470Z,1520502467.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:47.879Z,1520502467.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:48.280Z,1520502468.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:48.679Z,1520502468.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:49.071Z,1520502469.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:49.468Z,1520502469.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:49.881Z,1520502469.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:50.280Z,1520502470.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:50.679Z,1520502470.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:51.075Z,1520502471.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:51.470Z,1520502471.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:51.886Z,1520502471.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:52.281Z,1520502472.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:52.679Z,1520502472.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:53.071Z,1520502473.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:53.471Z,1520502473.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:53.883Z,1520502473.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:54.284Z,1520502474.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:54.679Z,1520502474.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:55.076Z,1520502475.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:55.477Z,1520502475.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:55.880Z,1520502475.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:56.283Z,1520502476.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:56.679Z,1520502476.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:57.075Z,1520502477.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:57.470Z,1520502477.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:57.884Z,1520502477.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:58.283Z,1520502478.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:58.683Z,1520502478.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:59.075Z,1520502479.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:59.472Z,1520502479.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:47:59.884Z,1520502479.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:00.280Z,1520502480.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:00.686Z,1520502480.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:01.075Z,1520502481.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:01.477Z,1520502481.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:01.887Z,1520502481.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:02.283Z,1520502482.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:02.681Z,1520502482.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:03.072Z,1520502483.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:03.470Z,1520502483.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:03.890Z,1520502483.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:04.283Z,1520502484.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:04.684Z,1520502484.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:05.075Z,1520502485.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:05.475Z,1520502485.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:05.883Z,1520502485.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:06.283Z,1520502486.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:06.684Z,1520502486.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:07.071Z,1520502487.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:07.476Z,1520502487.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:07.890Z,1520502487.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:08.283Z,1520502488.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:08.684Z,1520502488.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:09.078Z,1520502489.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:09.475Z,1520502489.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:09.884Z,1520502489.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:10.283Z,1520502490.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:10.683Z,1520502490.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:11.075Z,1520502491.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:11.479Z,1520502491.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:11.884Z,1520502491.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:12.281Z,1520502492.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:12.690Z,1520502492.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:13.075Z,1520502493.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:13.470Z,1520502493.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:13.880Z,1520502493.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:14.284Z,1520502494.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:14.690Z,1520502494.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:15.073Z,1520502495.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:15.472Z,1520502495.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:15.885Z,1520502495.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:16.284Z,1520502496.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:16.684Z,1520502496.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:17.076Z,1520502497.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:17.471Z,1520502497.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:17.884Z,1520502497.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:18.290Z,1520502498.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:18.690Z,1520502498.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:19.075Z,1520502499.075 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:19.075Z,1520502499.075 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42
2018-03-08T09:48:19.075Z,1520502499.075 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T09:48:19.077Z,1520502499.077 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:19.077Z,1520502499.077 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42
2018-03-08T09:48:19.077Z,1520502499.077 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T09:48:19.079Z,1520502499.079 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:19.079Z,1520502499.079 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 42
2018-03-08T09:48:19.079Z,1520502499.079 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T09:48:19.091Z,1520502499.091 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T09:48:19.091Z,1520502499.091 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T09:48:19.091Z,1520502499.091 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T09:48:19.497Z,1520502499.497 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T09:48:19.497Z,1520502499.497 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42
2018-03-08T09:48:19.497Z,1520502499.497 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T09:48:19.498Z,1520502499.498 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42
2018-03-08T09:48:19.498Z,1520502499.498 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T09:48:19.498Z,1520502499.498 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 42
2018-03-08T09:48:19.885Z,1520502499.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T09:48:19.886Z,1520502499.886 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:48:19.886Z,1520502499.886 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:48:19.887Z,1520502499.887 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T09:48:19.887Z,1520502499.887 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:48:19.887Z,1520502499.887 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:48:19.888Z,1520502499.888 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T09:48:19.888Z,1520502499.888 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:48:19.889Z,1520502499.889 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:48:20.284Z,1520502500.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T09:48:20.285Z,1520502500.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:20.680Z,1520502500.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T09:48:20.681Z,1520502500.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:21.075Z,1520502501.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T09:48:21.076Z,1520502501.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:21.482Z,1520502501.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T09:48:21.483Z,1520502501.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:21.886Z,1520502501.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T09:48:21.887Z,1520502501.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:22.287Z,1520502502.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T09:48:22.288Z,1520502502.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:22.690Z,1520502502.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T09:48:22.691Z,1520502502.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:23.079Z,1520502503.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T09:48:23.080Z,1520502503.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:23.481Z,1520502503.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T09:48:23.482Z,1520502503.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:23.887Z,1520502503.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T09:48:23.888Z,1520502503.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:24.290Z,1520502504.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T09:48:24.291Z,1520502504.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:24.685Z,1520502504.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T09:48:24.686Z,1520502504.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:25.083Z,1520502505.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T09:48:25.084Z,1520502505.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:25.467Z,1520502505.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T09:48:25.468Z,1520502505.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:25.898Z,1520502505.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T09:48:25.898Z,1520502505.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:26.280Z,1520502506.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T09:48:26.290Z,1520502506.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:26.702Z,1520502506.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T09:48:26.703Z,1520502506.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:27.071Z,1520502507.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T09:48:27.071Z,1520502507.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:27.470Z,1520502507.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T09:48:27.470Z,1520502507.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:27.884Z,1520502507.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T09:48:27.901Z,1520502507.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:28.279Z,1520502508.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T09:48:28.281Z,1520502508.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:28.682Z,1520502508.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T09:48:28.683Z,1520502508.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:29.078Z,1520502509.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T09:48:29.079Z,1520502509.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:29.472Z,1520502509.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T09:48:29.473Z,1520502509.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:29.877Z,1520502509.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T09:48:29.878Z,1520502509.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:30.275Z,1520502510.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T09:48:30.276Z,1520502510.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:30.676Z,1520502510.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T09:48:30.677Z,1520502510.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:31.066Z,1520502511.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T09:48:31.067Z,1520502511.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:31.498Z,1520502511.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T09:48:31.499Z,1520502511.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:34.594Z,1520502514.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-03-08T09:48:34.595Z,1520502514.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:34.738Z,1520502514.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T09:48:34.739Z,1520502514.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:35.084Z,1520502515.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T09:48:35.085Z,1520502515.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:35.461Z,1520502515.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T09:48:35.462Z,1520502515.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:35.882Z,1520502515.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T09:48:35.883Z,1520502515.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:36.296Z,1520502516.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T09:48:36.297Z,1520502516.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:36.671Z,1520502516.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T09:48:36.672Z,1520502516.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:37.080Z,1520502517.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T09:48:37.097Z,1520502517.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:37.476Z,1520502517.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T09:48:37.477Z,1520502517.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:37.882Z,1520502517.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T09:48:37.883Z,1520502517.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:38.274Z,1520502518.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T09:48:38.275Z,1520502518.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:38.667Z,1520502518.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T09:48:38.668Z,1520502518.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:39.070Z,1520502519.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T09:48:39.071Z,1520502519.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:39.474Z,1520502519.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:39.877Z,1520502519.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:40.276Z,1520502520.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:40.671Z,1520502520.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:41.067Z,1520502521.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:41.462Z,1520502521.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:41.876Z,1520502521.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:42.276Z,1520502522.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:42.682Z,1520502522.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:43.074Z,1520502523.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:43.469Z,1520502523.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:43.876Z,1520502523.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:44.277Z,1520502524.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:44.676Z,1520502524.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:45.067Z,1520502525.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:45.469Z,1520502525.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:45.876Z,1520502525.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:46.276Z,1520502526.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:46.676Z,1520502526.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:47.068Z,1520502527.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:47.469Z,1520502527.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:47.876Z,1520502527.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:48.272Z,1520502528.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:48.682Z,1520502528.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:49.069Z,1520502529.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:49.467Z,1520502529.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:49.876Z,1520502529.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:50.276Z,1520502530.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:50.676Z,1520502530.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:51.069Z,1520502531.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:51.475Z,1520502531.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:51.872Z,1520502531.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:52.271Z,1520502532.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:52.673Z,1520502532.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:53.071Z,1520502533.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:53.470Z,1520502533.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:53.877Z,1520502533.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:54.273Z,1520502534.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:54.672Z,1520502534.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:55.067Z,1520502535.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:55.466Z,1520502535.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:55.877Z,1520502535.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:56.277Z,1520502536.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:56.682Z,1520502536.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:57.068Z,1520502537.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:57.475Z,1520502537.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:57.876Z,1520502537.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:58.274Z,1520502538.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:58.677Z,1520502538.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:59.068Z,1520502539.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:59.471Z,1520502539.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:48:59.877Z,1520502539.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:00.276Z,1520502540.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:00.676Z,1520502540.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:01.068Z,1520502541.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:01.471Z,1520502541.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:01.876Z,1520502541.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:02.272Z,1520502542.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:02.677Z,1520502542.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:03.070Z,1520502543.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:03.465Z,1520502543.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:03.872Z,1520502543.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:04.276Z,1520502544.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:04.677Z,1520502544.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:05.067Z,1520502545.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:05.470Z,1520502545.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:05.871Z,1520502545.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:06.276Z,1520502546.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:06.678Z,1520502546.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:07.065Z,1520502547.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:07.466Z,1520502547.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:07.876Z,1520502547.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:08.272Z,1520502548.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:08.676Z,1520502548.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:09.068Z,1520502549.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:09.459Z,1520502549.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:09.872Z,1520502549.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:10.272Z,1520502550.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:10.676Z,1520502550.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:11.067Z,1520502551.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:11.467Z,1520502551.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:11.876Z,1520502551.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:12.273Z,1520502552.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:12.678Z,1520502552.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:13.068Z,1520502553.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:13.466Z,1520502553.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:13.872Z,1520502553.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:14.276Z,1520502554.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:14.676Z,1520502554.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:15.068Z,1520502555.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:15.462Z,1520502555.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:15.879Z,1520502555.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:16.275Z,1520502556.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:16.671Z,1520502556.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:17.074Z,1520502557.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:17.469Z,1520502557.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:17.876Z,1520502557.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:18.276Z,1520502558.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:18.682Z,1520502558.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:19.070Z,1520502559.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:19.469Z,1520502559.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:19.876Z,1520502559.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:20.278Z,1520502560.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:20.676Z,1520502560.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:21.070Z,1520502561.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:21.470Z,1520502561.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:21.877Z,1520502561.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:22.270Z,1520502562.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:22.676Z,1520502562.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:23.074Z,1520502563.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:23.466Z,1520502563.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:23.872Z,1520502563.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:24.272Z,1520502564.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:24.678Z,1520502564.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:25.064Z,1520502565.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:25.475Z,1520502565.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:25.876Z,1520502565.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:26.276Z,1520502566.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:26.683Z,1520502566.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:27.068Z,1520502567.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:27.464Z,1520502567.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:27.871Z,1520502567.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:28.271Z,1520502568.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:28.677Z,1520502568.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:29.070Z,1520502569.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:29.470Z,1520502569.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:29.877Z,1520502569.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:30.276Z,1520502570.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:30.678Z,1520502570.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:30.682Z,1520502570.682 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T09:44:30.3Z
2018-03-08T09:49:30.682Z,1520502570.682 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T09:49:30.682Z,1520502570.682 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T09:49:31.070Z,1520502571.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:31.561Z,1520502571.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:31.877Z,1520502571.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:34.983Z,1520502574.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:35.135Z,1520502575.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:35.437Z,1520502575.437 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0048.lzma
2018-03-08T09:49:35.511Z,1520502575.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:35.881Z,1520502575.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:36.239Z,1520502576.239 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0048.lzma.bak
2018-03-08T09:49:36.239Z,1520502576.239 [DataOverHttps](INFO): SBD MOMSN=7984643
2018-03-08T09:49:36.292Z,1520502576.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:36.844Z,1520502576.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:37.106Z,1520502577.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:37.514Z,1520502577.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:40.613Z,1520502580.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:40.753Z,1520502580.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:41.118Z,1520502581.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:41.492Z,1520502581.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:41.917Z,1520502581.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:42.322Z,1520502582.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:42.717Z,1520502582.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:45.797Z,1520502585.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:45.930Z,1520502585.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:46.249Z,1520502586.249 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0049.lzma
2018-03-08T09:49:46.304Z,1520502586.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:46.704Z,1520502586.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:47.051Z,1520502587.051 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0049.lzma.bak
2018-03-08T09:49:47.051Z,1520502587.051 [DataOverHttps](INFO): SBD MOMSN=7984645
2018-03-08T09:49:47.113Z,1520502587.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:47.656Z,1520502587.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:47.659Z,1520502587.659 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T09:49:47.659Z,1520502587.659 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T09:49:47.659Z,1520502587.659 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T09:49:47.906Z,1520502587.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:51.002Z,1520502591.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:51.135Z,1520502591.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:51.502Z,1520502591.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:51.887Z,1520502591.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:52.279Z,1520502592.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:52.674Z,1520502592.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:53.075Z,1520502593.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:53.474Z,1520502593.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:53.880Z,1520502593.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:54.279Z,1520502594.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:54.679Z,1520502594.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:55.075Z,1520502595.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:55.474Z,1520502595.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:55.879Z,1520502595.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:56.280Z,1520502596.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:56.680Z,1520502596.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:57.071Z,1520502597.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:57.470Z,1520502597.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:57.879Z,1520502597.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:58.280Z,1520502598.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:58.680Z,1520502598.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:59.075Z,1520502599.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:59.472Z,1520502599.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:49:59.880Z,1520502599.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:00.279Z,1520502600.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:00.679Z,1520502600.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:01.074Z,1520502601.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:01.479Z,1520502601.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:01.879Z,1520502601.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:02.280Z,1520502602.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:02.679Z,1520502602.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:03.082Z,1520502603.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:03.475Z,1520502603.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:03.886Z,1520502603.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:04.280Z,1520502604.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:04.679Z,1520502604.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:05.071Z,1520502605.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:05.479Z,1520502605.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:05.879Z,1520502605.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:06.280Z,1520502606.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:06.686Z,1520502606.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:07.075Z,1520502607.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:07.475Z,1520502607.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:07.879Z,1520502607.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:08.280Z,1520502608.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:08.680Z,1520502608.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:09.076Z,1520502609.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:09.471Z,1520502609.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:09.880Z,1520502609.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:10.281Z,1520502610.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:10.686Z,1520502610.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:11.075Z,1520502611.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:11.470Z,1520502611.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:11.881Z,1520502611.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:12.283Z,1520502612.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:12.679Z,1520502612.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:13.082Z,1520502613.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:13.478Z,1520502613.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:13.880Z,1520502613.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:14.281Z,1520502614.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:14.680Z,1520502614.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:15.077Z,1520502615.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:15.475Z,1520502615.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:15.882Z,1520502615.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:16.279Z,1520502616.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:16.680Z,1520502616.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:17.077Z,1520502617.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:17.467Z,1520502617.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:17.885Z,1520502617.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:18.280Z,1520502618.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:18.682Z,1520502618.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:19.075Z,1520502619.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:19.471Z,1520502619.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:19.879Z,1520502619.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:20.280Z,1520502620.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:20.686Z,1520502620.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:21.075Z,1520502621.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:21.470Z,1520502621.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:21.881Z,1520502621.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:22.285Z,1520502622.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:22.684Z,1520502622.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:23.078Z,1520502623.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:23.466Z,1520502623.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:23.880Z,1520502623.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:24.279Z,1520502624.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:24.681Z,1520502624.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:25.074Z,1520502625.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:25.475Z,1520502625.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:25.879Z,1520502625.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:26.280Z,1520502626.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:26.708Z,1520502626.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:27.068Z,1520502627.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:27.477Z,1520502627.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:27.879Z,1520502627.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:28.382Z,1520502628.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:28.679Z,1520502628.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:29.066Z,1520502629.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:29.470Z,1520502629.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:29.877Z,1520502629.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:30.284Z,1520502630.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:30.682Z,1520502630.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:31.075Z,1520502631.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:31.475Z,1520502631.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:31.879Z,1520502631.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:32.280Z,1520502632.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:32.706Z,1520502632.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:33.072Z,1520502633.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:33.470Z,1520502633.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:33.879Z,1520502633.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:34.279Z,1520502634.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:34.679Z,1520502634.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:35.071Z,1520502635.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:35.469Z,1520502635.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:35.906Z,1520502635.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:36.286Z,1520502636.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:36.679Z,1520502636.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:37.071Z,1520502637.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:37.477Z,1520502637.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:37.886Z,1520502637.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:38.286Z,1520502638.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:38.686Z,1520502638.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:39.069Z,1520502639.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:39.471Z,1520502639.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:39.880Z,1520502639.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:40.280Z,1520502640.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:40.706Z,1520502640.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:41.078Z,1520502641.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:41.476Z,1520502641.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:41.880Z,1520502641.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:42.285Z,1520502642.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:42.681Z,1520502642.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:43.078Z,1520502643.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:43.478Z,1520502643.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:43.889Z,1520502643.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:44.285Z,1520502644.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:44.691Z,1520502644.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:45.076Z,1520502645.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:45.477Z,1520502645.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:45.889Z,1520502645.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:46.283Z,1520502646.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:46.681Z,1520502646.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:47.078Z,1520502647.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:47.455Z,1520502647.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:47.886Z,1520502647.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:48.283Z,1520502648.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:51.383Z,1520502651.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:51.523Z,1520502651.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:51.859Z,1520502651.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:52.253Z,1520502652.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:52.663Z,1520502652.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:53.086Z,1520502653.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:53.468Z,1520502653.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:53.861Z,1520502653.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:54.255Z,1520502654.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:54.656Z,1520502654.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:55.057Z,1520502655.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:55.456Z,1520502655.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:55.868Z,1520502655.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:56.257Z,1520502656.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:56.686Z,1520502656.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:57.055Z,1520502657.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:57.456Z,1520502657.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:57.885Z,1520502657.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:58.290Z,1520502658.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:58.657Z,1520502658.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:59.053Z,1520502659.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:59.451Z,1520502659.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:50:59.888Z,1520502659.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:00.260Z,1520502660.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:00.668Z,1520502660.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:01.049Z,1520502661.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:01.458Z,1520502661.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:01.857Z,1520502661.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:02.265Z,1520502662.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:02.664Z,1520502662.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:03.062Z,1520502663.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:03.449Z,1520502663.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:03.853Z,1520502663.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:04.259Z,1520502664.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:04.654Z,1520502664.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:05.061Z,1520502665.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:05.464Z,1520502665.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:05.860Z,1520502665.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:06.254Z,1520502666.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:06.654Z,1520502666.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:07.059Z,1520502667.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:07.458Z,1520502667.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:07.864Z,1520502667.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:08.263Z,1520502668.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:08.670Z,1520502668.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:09.060Z,1520502669.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:09.451Z,1520502669.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:09.864Z,1520502669.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:10.264Z,1520502670.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:10.674Z,1520502670.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:11.060Z,1520502671.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:11.452Z,1520502671.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:11.866Z,1520502671.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:12.274Z,1520502672.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:12.669Z,1520502672.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:13.058Z,1520502673.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:13.461Z,1520502673.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:13.874Z,1520502673.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:14.264Z,1520502674.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:14.665Z,1520502674.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:15.059Z,1520502675.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:15.453Z,1520502675.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:15.866Z,1520502675.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:16.271Z,1520502676.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:16.675Z,1520502676.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:17.063Z,1520502677.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:17.458Z,1520502677.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:17.874Z,1520502677.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:18.278Z,1520502678.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:18.672Z,1520502678.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:19.057Z,1520502679.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:19.462Z,1520502679.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:19.856Z,1520502679.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:20.274Z,1520502680.274 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:20.275Z,1520502680.275 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43
2018-03-08T09:51:20.275Z,1520502680.275 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T09:51:20.277Z,1520502680.277 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:20.277Z,1520502680.277 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43
2018-03-08T09:51:20.277Z,1520502680.277 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T09:51:20.278Z,1520502680.278 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:20.279Z,1520502680.279 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 43
2018-03-08T09:51:20.279Z,1520502680.279 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T09:51:20.315Z,1520502680.315 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T09:51:20.316Z,1520502680.316 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T09:51:20.316Z,1520502680.316 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T09:51:20.701Z,1520502680.701 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T09:51:20.701Z,1520502680.701 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43
2018-03-08T09:51:20.701Z,1520502680.701 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T09:51:20.701Z,1520502680.701 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43
2018-03-08T09:51:20.702Z,1520502680.702 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T09:51:20.702Z,1520502680.702 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 43
2018-03-08T09:51:21.074Z,1520502681.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T09:51:21.075Z,1520502681.075 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:51:21.075Z,1520502681.075 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:51:21.075Z,1520502681.075 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T09:51:21.076Z,1520502681.076 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:51:21.076Z,1520502681.076 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:51:21.076Z,1520502681.076 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T09:51:21.077Z,1520502681.077 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:51:21.077Z,1520502681.077 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:51:21.461Z,1520502681.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T09:51:21.462Z,1520502681.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:21.861Z,1520502681.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T09:51:21.862Z,1520502681.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:22.262Z,1520502682.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T09:51:22.263Z,1520502682.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:22.660Z,1520502682.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T09:51:22.661Z,1520502682.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:23.066Z,1520502683.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T09:51:23.067Z,1520502683.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:23.468Z,1520502683.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T09:51:23.469Z,1520502683.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:23.874Z,1520502683.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T09:51:23.875Z,1520502683.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:24.261Z,1520502684.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T09:51:24.262Z,1520502684.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:24.662Z,1520502684.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T09:51:24.663Z,1520502684.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:25.055Z,1520502685.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T09:51:25.056Z,1520502685.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:25.470Z,1520502685.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T09:51:25.471Z,1520502685.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:25.872Z,1520502685.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T09:51:25.873Z,1520502685.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:26.270Z,1520502686.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T09:51:26.271Z,1520502686.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:26.674Z,1520502686.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T09:51:26.675Z,1520502686.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:27.069Z,1520502687.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T09:51:27.070Z,1520502687.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:27.466Z,1520502687.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T09:51:27.467Z,1520502687.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:27.849Z,1520502687.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T09:51:27.850Z,1520502687.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:28.253Z,1520502688.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T09:51:28.254Z,1520502688.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:28.658Z,1520502688.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T09:51:28.659Z,1520502688.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:29.064Z,1520502689.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T09:51:29.085Z,1520502689.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:29.463Z,1520502689.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T09:51:29.464Z,1520502689.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:29.864Z,1520502689.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T09:51:29.885Z,1520502689.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:30.256Z,1520502690.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T09:51:30.257Z,1520502690.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:30.653Z,1520502690.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T09:51:30.654Z,1520502690.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:31.055Z,1520502691.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T09:51:31.061Z,1520502691.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:31.459Z,1520502691.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T09:51:31.460Z,1520502691.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:31.857Z,1520502691.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T09:51:31.858Z,1520502691.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:32.262Z,1520502692.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T09:51:32.263Z,1520502692.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:32.664Z,1520502692.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T09:51:32.665Z,1520502692.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:33.060Z,1520502693.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T09:51:33.061Z,1520502693.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:33.451Z,1520502693.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T09:51:33.452Z,1520502693.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:33.854Z,1520502693.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T09:51:33.855Z,1520502693.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:34.255Z,1520502694.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T09:51:34.256Z,1520502694.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:34.656Z,1520502694.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T09:51:34.657Z,1520502694.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:35.061Z,1520502695.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T09:51:35.062Z,1520502695.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:35.463Z,1520502695.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T09:51:35.464Z,1520502695.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:35.861Z,1520502695.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T09:51:35.862Z,1520502695.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:36.262Z,1520502696.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T09:51:36.263Z,1520502696.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:36.657Z,1520502696.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T09:51:36.658Z,1520502696.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:37.052Z,1520502697.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T09:51:37.053Z,1520502697.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:37.462Z,1520502697.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T09:51:37.463Z,1520502697.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:37.858Z,1520502697.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T09:51:37.858Z,1520502697.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:38.261Z,1520502698.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T09:51:38.262Z,1520502698.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:38.665Z,1520502698.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T09:51:38.665Z,1520502698.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:39.067Z,1520502699.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T09:51:39.068Z,1520502699.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:39.447Z,1520502699.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T09:51:39.448Z,1520502699.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:39.862Z,1520502699.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T09:51:39.863Z,1520502699.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:40.257Z,1520502700.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T09:51:40.258Z,1520502700.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:40.649Z,1520502700.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:41.082Z,1520502701.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:41.459Z,1520502701.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:41.861Z,1520502701.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:42.254Z,1520502702.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:42.267Z,1520502702.267 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T09:51:42.655Z,1520502702.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:43.063Z,1520502703.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:43.457Z,1520502703.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:43.860Z,1520502703.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:44.264Z,1520502704.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:44.667Z,1520502704.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:45.058Z,1520502705.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:45.449Z,1520502705.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:45.859Z,1520502705.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:46.266Z,1520502706.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:46.660Z,1520502706.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:47.053Z,1520502707.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:47.456Z,1520502707.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:47.851Z,1520502707.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:48.267Z,1520502708.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:48.664Z,1520502708.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:51.787Z,1520502711.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:51.919Z,1520502711.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:52.267Z,1520502712.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:52.658Z,1520502712.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:53.063Z,1520502713.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:53.463Z,1520502713.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:53.872Z,1520502713.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:54.271Z,1520502714.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:54.665Z,1520502714.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:55.059Z,1520502715.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:55.455Z,1520502715.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:55.863Z,1520502715.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:56.268Z,1520502716.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:56.665Z,1520502716.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:57.062Z,1520502717.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:57.462Z,1520502717.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:57.868Z,1520502717.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:58.278Z,1520502718.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:58.678Z,1520502718.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:59.055Z,1520502719.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:59.459Z,1520502719.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:51:59.862Z,1520502719.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:00.289Z,1520502720.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:00.726Z,1520502720.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:01.074Z,1520502721.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:01.466Z,1520502721.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:01.866Z,1520502721.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:02.258Z,1520502722.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:02.667Z,1520502722.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:03.069Z,1520502723.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:03.478Z,1520502723.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:03.866Z,1520502723.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:04.271Z,1520502724.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:04.663Z,1520502724.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:05.063Z,1520502725.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:05.465Z,1520502725.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:05.878Z,1520502725.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:06.269Z,1520502726.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:06.678Z,1520502726.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:07.063Z,1520502727.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:07.466Z,1520502727.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:07.873Z,1520502727.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:08.276Z,1520502728.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:08.673Z,1520502728.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:09.063Z,1520502729.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:09.462Z,1520502729.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:09.879Z,1520502729.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:10.282Z,1520502730.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:10.682Z,1520502730.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:11.066Z,1520502731.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:11.463Z,1520502731.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:11.857Z,1520502731.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:12.279Z,1520502732.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:12.683Z,1520502732.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:13.078Z,1520502733.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:13.467Z,1520502733.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:13.860Z,1520502733.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:14.262Z,1520502734.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:14.660Z,1520502734.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:15.069Z,1520502735.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:15.476Z,1520502735.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:15.874Z,1520502735.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:16.260Z,1520502736.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:16.670Z,1520502736.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:17.067Z,1520502737.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:17.472Z,1520502737.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:17.882Z,1520502737.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:18.269Z,1520502738.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:18.669Z,1520502738.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:19.116Z,1520502739.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:19.443Z,1520502739.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:19.864Z,1520502739.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:20.261Z,1520502740.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:20.664Z,1520502740.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:21.052Z,1520502741.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:21.449Z,1520502741.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:21.864Z,1520502741.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:22.272Z,1520502742.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:22.677Z,1520502742.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:23.054Z,1520502743.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:23.454Z,1520502743.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:23.879Z,1520502743.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:24.280Z,1520502744.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:24.686Z,1520502744.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:25.057Z,1520502745.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:25.451Z,1520502745.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:25.877Z,1520502745.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:26.278Z,1520502746.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:26.676Z,1520502746.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:27.058Z,1520502747.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:27.457Z,1520502747.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:27.864Z,1520502747.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:28.288Z,1520502748.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:28.684Z,1520502748.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:29.055Z,1520502749.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:29.462Z,1520502749.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:29.855Z,1520502749.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:30.286Z,1520502750.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:30.687Z,1520502750.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:31.085Z,1520502751.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:31.462Z,1520502751.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:31.859Z,1520502751.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:32.262Z,1520502752.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:32.661Z,1520502752.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:33.065Z,1520502753.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:33.463Z,1520502753.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:33.865Z,1520502753.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:34.261Z,1520502754.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:34.662Z,1520502754.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:35.066Z,1520502755.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:35.459Z,1520502755.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:35.865Z,1520502755.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:36.270Z,1520502756.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:36.664Z,1520502756.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:37.063Z,1520502757.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:37.455Z,1520502757.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:37.863Z,1520502757.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:38.274Z,1520502758.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:38.670Z,1520502758.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:39.058Z,1520502759.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:39.463Z,1520502759.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:39.870Z,1520502759.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:40.268Z,1520502760.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:40.669Z,1520502760.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:41.071Z,1520502761.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:41.466Z,1520502761.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:41.869Z,1520502761.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:42.268Z,1520502762.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:42.675Z,1520502762.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:43.064Z,1520502763.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:43.457Z,1520502763.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:43.867Z,1520502763.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:44.268Z,1520502764.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:44.675Z,1520502764.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:45.063Z,1520502765.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:45.466Z,1520502765.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:45.879Z,1520502765.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:46.271Z,1520502766.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:46.672Z,1520502766.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:47.066Z,1520502767.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:47.460Z,1520502767.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:47.873Z,1520502767.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:48.279Z,1520502768.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:48.671Z,1520502768.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:51.783Z,1520502771.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:51.914Z,1520502771.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:52.300Z,1520502772.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:52.704Z,1520502772.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:53.106Z,1520502773.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:53.482Z,1520502773.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:53.879Z,1520502773.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:54.281Z,1520502774.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:54.680Z,1520502774.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:55.105Z,1520502775.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:55.490Z,1520502775.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:55.889Z,1520502775.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:56.283Z,1520502776.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:56.686Z,1520502776.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:57.083Z,1520502777.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:57.475Z,1520502777.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:57.885Z,1520502777.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:58.289Z,1520502778.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:58.690Z,1520502778.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:59.083Z,1520502779.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:59.481Z,1520502779.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:52:59.884Z,1520502779.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:00.289Z,1520502780.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:00.685Z,1520502780.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:01.083Z,1520502781.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:01.481Z,1520502781.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:01.890Z,1520502781.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:02.288Z,1520502782.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:02.685Z,1520502782.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:03.086Z,1520502783.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:03.481Z,1520502783.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:03.886Z,1520502783.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:04.288Z,1520502784.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:04.690Z,1520502784.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:05.082Z,1520502785.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:05.481Z,1520502785.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:05.884Z,1520502785.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:06.288Z,1520502786.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:06.690Z,1520502786.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:07.082Z,1520502787.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:07.481Z,1520502787.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:07.883Z,1520502787.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:08.288Z,1520502788.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:08.691Z,1520502788.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:09.086Z,1520502789.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:09.479Z,1520502789.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:09.885Z,1520502789.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:10.288Z,1520502790.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:10.690Z,1520502790.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:11.087Z,1520502791.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:11.482Z,1520502791.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:11.884Z,1520502791.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:12.288Z,1520502792.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:12.685Z,1520502792.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:13.082Z,1520502793.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:13.478Z,1520502793.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:13.885Z,1520502793.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:14.288Z,1520502794.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:14.690Z,1520502794.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:15.086Z,1520502795.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:15.482Z,1520502795.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:15.885Z,1520502795.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:16.290Z,1520502796.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:16.690Z,1520502796.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:17.080Z,1520502797.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:17.482Z,1520502797.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:17.884Z,1520502797.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:18.290Z,1520502798.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:18.685Z,1520502798.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:19.082Z,1520502799.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:19.481Z,1520502799.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:19.890Z,1520502799.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:20.288Z,1520502800.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:20.691Z,1520502800.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:21.082Z,1520502801.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:21.476Z,1520502801.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:21.885Z,1520502801.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:22.290Z,1520502802.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:22.690Z,1520502802.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:23.081Z,1520502803.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:23.482Z,1520502803.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:23.884Z,1520502803.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:24.288Z,1520502804.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:24.685Z,1520502804.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:25.081Z,1520502805.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:25.482Z,1520502805.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:25.885Z,1520502805.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:26.288Z,1520502806.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:26.685Z,1520502806.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:27.090Z,1520502807.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:27.481Z,1520502807.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:27.885Z,1520502807.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:28.290Z,1520502808.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:28.684Z,1520502808.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:29.087Z,1520502809.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:29.481Z,1520502809.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:29.891Z,1520502809.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:30.290Z,1520502810.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:30.685Z,1520502810.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:31.083Z,1520502811.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:31.481Z,1520502811.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:31.884Z,1520502811.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:32.288Z,1520502812.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:32.685Z,1520502812.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:33.088Z,1520502813.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:33.486Z,1520502813.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:33.834Z,1520502813.834 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T09:53:33.834Z,1520502813.834 [NAL9602] Data Fault, FailCount= 3
2018-03-08T09:53:33.834Z,1520502813.834 [NAL9602](ERROR): Data Fault
2018-03-08T09:53:33.884Z,1520502813.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:33.910Z,1520502813.910 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T09:53:34.238Z,1520502814.238 [NAL9602](INFO): Powering down
2018-03-08T09:53:34.283Z,1520502814.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:34.691Z,1520502814.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:35.064Z,1520502815.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:35.093Z,1520502815.093 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T09:53:35.093Z,1520502815.093 [NAL9602] No Fault, FailCount= 3
2018-03-08T09:53:35.490Z,1520502815.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:35.891Z,1520502815.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:36.270Z,1520502816.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:36.675Z,1520502816.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:37.074Z,1520502817.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:37.466Z,1520502817.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:37.899Z,1520502817.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:38.277Z,1520502818.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:38.670Z,1520502818.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:39.074Z,1520502819.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:39.478Z,1520502819.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:39.870Z,1520502819.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:40.283Z,1520502820.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:40.678Z,1520502820.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:41.074Z,1520502821.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:41.483Z,1520502821.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:41.874Z,1520502821.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:42.279Z,1520502822.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:42.679Z,1520502822.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:43.078Z,1520502823.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:43.474Z,1520502823.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:43.879Z,1520502823.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:44.278Z,1520502824.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:44.678Z,1520502824.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:45.079Z,1520502825.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:45.478Z,1520502825.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:45.874Z,1520502825.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:46.283Z,1520502826.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:46.673Z,1520502826.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:47.073Z,1520502827.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:47.483Z,1520502827.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:47.881Z,1520502827.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:48.282Z,1520502828.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:48.683Z,1520502828.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:51.787Z,1520502831.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:51.922Z,1520502831.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:52.298Z,1520502832.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:52.690Z,1520502832.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:53.092Z,1520502833.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:53.498Z,1520502833.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:53.890Z,1520502833.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:54.290Z,1520502834.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:54.695Z,1520502834.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:55.094Z,1520502835.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:55.491Z,1520502835.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:55.898Z,1520502835.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:56.289Z,1520502836.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:56.691Z,1520502836.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:57.102Z,1520502837.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:57.497Z,1520502837.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:57.899Z,1520502837.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:58.302Z,1520502838.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:58.697Z,1520502838.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:59.091Z,1520502839.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:59.498Z,1520502839.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:53:59.898Z,1520502839.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:00.293Z,1520502840.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:00.695Z,1520502840.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:01.097Z,1520502841.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:01.491Z,1520502841.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:01.894Z,1520502841.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:02.289Z,1520502842.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:02.692Z,1520502842.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:03.098Z,1520502843.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:03.497Z,1520502843.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:03.897Z,1520502843.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:04.254Z,1520502844.254 [NAL9602](INFO): Powering up NAL9602
2018-03-08T09:54:04.305Z,1520502844.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:04.698Z,1520502844.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:05.095Z,1520502845.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:05.506Z,1520502845.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:05.897Z,1520502845.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:06.302Z,1520502846.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:06.696Z,1520502846.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:07.096Z,1520502847.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:07.496Z,1520502847.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:07.906Z,1520502847.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:08.302Z,1520502848.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:08.700Z,1520502848.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:09.102Z,1520502849.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:09.504Z,1520502849.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:09.879Z,1520502849.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:10.306Z,1520502850.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:10.705Z,1520502850.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:11.083Z,1520502851.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:11.514Z,1520502851.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:11.889Z,1520502851.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:12.282Z,1520502852.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:12.713Z,1520502852.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:13.085Z,1520502853.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:13.483Z,1520502853.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:13.911Z,1520502853.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:14.287Z,1520502854.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:14.693Z,1520502854.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:15.120Z,1520502855.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:15.459Z,1520502855.459 [NAL9602](INFO): NAL9602 initialized
2018-03-08T09:54:15.491Z,1520502855.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:15.895Z,1520502855.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:16.323Z,1520502856.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:16.724Z,1520502856.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:17.123Z,1520502857.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:17.495Z,1520502857.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:17.890Z,1520502857.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:18.294Z,1520502858.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:18.693Z,1520502858.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:19.102Z,1520502859.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:19.523Z,1520502859.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:19.924Z,1520502859.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:20.295Z,1520502860.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:20.693Z,1520502860.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:21.100Z,1520502861.100 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:21.100Z,1520502861.100 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44
2018-03-08T09:54:21.101Z,1520502861.101 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T09:54:21.102Z,1520502861.102 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:21.102Z,1520502861.102 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44
2018-03-08T09:54:21.102Z,1520502861.102 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T09:54:21.104Z,1520502861.104 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:21.104Z,1520502861.104 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 44
2018-03-08T09:54:21.104Z,1520502861.104 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T09:54:21.153Z,1520502861.153 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T09:54:21.153Z,1520502861.153 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T09:54:21.153Z,1520502861.153 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T09:54:21.537Z,1520502861.537 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T09:54:21.537Z,1520502861.537 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44
2018-03-08T09:54:21.537Z,1520502861.537 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T09:54:21.538Z,1520502861.538 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44
2018-03-08T09:54:21.538Z,1520502861.538 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T09:54:21.538Z,1520502861.538 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 44
2018-03-08T09:54:21.900Z,1520502861.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T09:54:21.901Z,1520502861.901 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:54:21.901Z,1520502861.901 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:54:21.901Z,1520502861.901 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T09:54:21.902Z,1520502861.902 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:54:21.902Z,1520502861.902 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:54:21.902Z,1520502861.902 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T09:54:21.903Z,1520502861.903 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:54:21.903Z,1520502861.903 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:54:22.304Z,1520502862.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T09:54:22.305Z,1520502862.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:22.702Z,1520502862.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T09:54:22.703Z,1520502862.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:23.101Z,1520502863.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T09:54:23.102Z,1520502863.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:23.514Z,1520502863.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T09:54:23.515Z,1520502863.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:23.914Z,1520502863.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T09:54:23.915Z,1520502863.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:24.298Z,1520502864.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T09:54:24.299Z,1520502864.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:24.695Z,1520502864.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T09:54:24.696Z,1520502864.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:25.107Z,1520502865.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T09:54:25.109Z,1520502865.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:25.507Z,1520502865.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T09:54:25.508Z,1520502865.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:25.914Z,1520502865.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T09:54:25.915Z,1520502865.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:26.299Z,1520502866.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T09:54:26.300Z,1520502866.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:26.701Z,1520502866.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T09:54:26.702Z,1520502866.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:27.108Z,1520502867.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T09:54:27.109Z,1520502867.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:27.514Z,1520502867.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T09:54:27.515Z,1520502867.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:27.908Z,1520502867.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T09:54:27.909Z,1520502867.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:28.306Z,1520502868.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T09:54:28.307Z,1520502868.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:28.699Z,1520502868.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T09:54:28.700Z,1520502868.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:29.100Z,1520502869.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T09:54:29.101Z,1520502869.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:29.514Z,1520502869.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T09:54:29.515Z,1520502869.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:29.907Z,1520502869.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T09:54:29.909Z,1520502869.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:30.298Z,1520502870.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T09:54:30.299Z,1520502870.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:30.696Z,1520502870.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T09:54:30.697Z,1520502870.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:31.114Z,1520502871.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T09:54:31.115Z,1520502871.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:31.508Z,1520502871.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T09:54:31.509Z,1520502871.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:31.914Z,1520502871.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T09:54:31.915Z,1520502871.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:32.298Z,1520502872.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T09:54:32.299Z,1520502872.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:32.697Z,1520502872.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T09:54:32.698Z,1520502872.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:33.108Z,1520502873.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T09:54:33.109Z,1520502873.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:33.511Z,1520502873.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T09:54:33.512Z,1520502873.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:33.899Z,1520502873.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T09:54:33.900Z,1520502873.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:34.296Z,1520502874.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T09:54:34.297Z,1520502874.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:34.706Z,1520502874.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T09:54:34.707Z,1520502874.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:35.108Z,1520502875.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T09:54:35.109Z,1520502875.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:35.514Z,1520502875.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T09:54:35.515Z,1520502875.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:35.908Z,1520502875.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T09:54:35.909Z,1520502875.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:36.294Z,1520502876.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T09:54:36.295Z,1520502876.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:36.704Z,1520502876.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T09:54:36.705Z,1520502876.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:37.109Z,1520502877.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T09:54:37.110Z,1520502877.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:37.508Z,1520502877.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T09:54:37.509Z,1520502877.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:37.914Z,1520502877.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T09:54:37.915Z,1520502877.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:38.305Z,1520502878.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T09:54:38.306Z,1520502878.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:38.701Z,1520502878.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T09:54:38.702Z,1520502878.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:39.109Z,1520502879.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T09:54:39.110Z,1520502879.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:39.512Z,1520502879.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T09:54:39.513Z,1520502879.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:39.908Z,1520502879.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T09:54:39.913Z,1520502879.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:40.290Z,1520502880.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T09:54:40.291Z,1520502880.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:40.710Z,1520502880.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T09:54:40.711Z,1520502880.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:41.111Z,1520502881.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:41.513Z,1520502881.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:41.913Z,1520502881.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:42.294Z,1520502882.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:42.690Z,1520502882.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:43.125Z,1520502883.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:43.523Z,1520502883.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:43.919Z,1520502883.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:44.292Z,1520502884.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:44.695Z,1520502884.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:45.104Z,1520502885.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:45.508Z,1520502885.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:45.900Z,1520502885.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:46.299Z,1520502886.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:46.694Z,1520502886.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:47.101Z,1520502887.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:47.503Z,1520502887.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:47.906Z,1520502887.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:47.909Z,1520502887.909 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T09:54:47.910Z,1520502887.910 [Default:CheckIn:C.Wait] Stopped
2018-03-08T09:54:47.910Z,1520502887.910 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T09:54:47.910Z,1520502887.910 [Default:CheckIn:D] Running Loop=1
2018-03-08T09:54:48.299Z,1520502888.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:48.302Z,1520502888.302 [Default:CheckIn:D] Stopped
2018-03-08T09:54:48.302Z,1520502888.302 [Default:CheckIn:E] Running Loop=1
2018-03-08T09:54:48.696Z,1520502888.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:48.699Z,1520502888.699 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 129.058285 min 
2018-03-08T09:54:48.699Z,1520502888.699 [Default:CheckIn:E] Stopped
2018-03-08T09:54:48.699Z,1520502888.699 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T09:54:48.699Z,1520502888.699 [Default:CheckIn] Stopped
2018-03-08T09:54:48.699Z,1520502888.699 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T09:54:48.700Z,1520502888.700 [Default:CheckIn](INFO): Running loop #13
2018-03-08T09:54:48.700Z,1520502888.700 [Default:CheckIn] Running Loop=13
2018-03-08T09:54:48.700Z,1520502888.700 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T09:54:48.700Z,1520502888.700 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T09:54:51.847Z,1520502891.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:51.993Z,1520502891.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:52.347Z,1520502892.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:52.718Z,1520502892.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:53.119Z,1520502893.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:53.518Z,1520502893.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:53.923Z,1520502893.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:54.346Z,1520502894.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:54.746Z,1520502894.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:55.141Z,1520502895.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:55.520Z,1520502895.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:55.923Z,1520502895.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:56.321Z,1520502896.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:56.723Z,1520502896.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:57.129Z,1520502897.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:57.529Z,1520502897.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:57.928Z,1520502897.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:58.317Z,1520502898.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:58.716Z,1520502898.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:59.116Z,1520502899.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:59.520Z,1520502899.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:54:59.923Z,1520502899.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:00.354Z,1520502900.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:00.728Z,1520502900.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:01.127Z,1520502901.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:01.523Z,1520502901.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:01.922Z,1520502901.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:02.323Z,1520502902.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:02.722Z,1520502902.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:03.134Z,1520502903.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:03.528Z,1520502903.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:03.935Z,1520502903.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:04.326Z,1520502904.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:04.722Z,1520502904.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:05.126Z,1520502905.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:05.519Z,1520502905.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:05.931Z,1520502905.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:06.327Z,1520502906.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:06.731Z,1520502906.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:07.129Z,1520502907.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:07.521Z,1520502907.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:07.919Z,1520502907.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:08.327Z,1520502908.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:08.726Z,1520502908.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:09.129Z,1520502909.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:09.534Z,1520502909.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:09.931Z,1520502909.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:10.326Z,1520502910.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:10.724Z,1520502910.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:11.123Z,1520502911.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:11.524Z,1520502911.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:11.922Z,1520502911.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:12.325Z,1520502912.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:12.732Z,1520502912.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:13.129Z,1520502913.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:13.519Z,1520502913.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:13.923Z,1520502913.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:14.326Z,1520502914.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:14.723Z,1520502914.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:15.138Z,1520502915.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:15.536Z,1520502915.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:15.945Z,1520502915.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:16.325Z,1520502916.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:16.726Z,1520502916.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:17.123Z,1520502917.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:17.525Z,1520502917.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:17.927Z,1520502917.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:18.333Z,1520502918.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:18.734Z,1520502918.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:19.135Z,1520502919.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:19.523Z,1520502919.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:19.925Z,1520502919.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:20.326Z,1520502920.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:20.725Z,1520502920.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:21.130Z,1520502921.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:21.536Z,1520502921.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:21.933Z,1520502921.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:22.325Z,1520502922.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:22.726Z,1520502922.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:23.130Z,1520502923.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:23.527Z,1520502923.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:23.930Z,1520502923.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:24.333Z,1520502924.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:24.740Z,1520502924.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:25.134Z,1520502925.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:25.529Z,1520502925.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:25.942Z,1520502925.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:26.331Z,1520502926.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:26.727Z,1520502926.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:27.137Z,1520502927.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:27.536Z,1520502927.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:27.938Z,1520502927.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:28.334Z,1520502928.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:28.737Z,1520502928.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:29.112Z,1520502929.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:29.515Z,1520502929.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:29.918Z,1520502929.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:30.340Z,1520502930.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:30.742Z,1520502930.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:31.139Z,1520502931.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:31.543Z,1520502931.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:31.943Z,1520502931.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:32.315Z,1520502932.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:32.722Z,1520502932.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:33.144Z,1520502933.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:33.546Z,1520502933.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:33.924Z,1520502933.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:34.322Z,1520502934.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:34.720Z,1520502934.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:35.122Z,1520502935.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:35.520Z,1520502935.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:35.915Z,1520502935.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:36.349Z,1520502936.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:36.725Z,1520502936.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:37.155Z,1520502937.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:37.523Z,1520502937.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:37.920Z,1520502937.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:38.319Z,1520502938.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:38.715Z,1520502938.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:39.120Z,1520502939.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:39.532Z,1520502939.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:39.921Z,1520502939.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:40.322Z,1520502940.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:40.715Z,1520502940.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:41.119Z,1520502941.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:41.527Z,1520502941.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:41.922Z,1520502941.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:42.325Z,1520502942.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:42.728Z,1520502942.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:43.130Z,1520502943.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:43.515Z,1520502943.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:43.921Z,1520502943.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:44.326Z,1520502944.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:44.718Z,1520502944.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:45.125Z,1520502945.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:45.528Z,1520502945.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:45.923Z,1520502945.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:46.321Z,1520502946.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:46.719Z,1520502946.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:47.115Z,1520502947.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:47.519Z,1520502947.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:47.914Z,1520502947.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:48.323Z,1520502948.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:48.729Z,1520502948.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:51.851Z,1520502951.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:51.994Z,1520502951.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:52.354Z,1520502952.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:52.722Z,1520502952.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:53.129Z,1520502953.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:53.553Z,1520502953.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:53.954Z,1520502953.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:54.321Z,1520502954.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:54.721Z,1520502954.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:55.122Z,1520502955.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:55.521Z,1520502955.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:55.931Z,1520502955.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:56.329Z,1520502956.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:56.731Z,1520502956.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:57.129Z,1520502957.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:57.518Z,1520502957.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:57.919Z,1520502957.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:58.324Z,1520502958.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:58.722Z,1520502958.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:59.127Z,1520502959.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:59.540Z,1520502959.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:55:59.930Z,1520502959.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:00.325Z,1520502960.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:00.725Z,1520502960.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:01.123Z,1520502961.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:01.520Z,1520502961.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:01.923Z,1520502961.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:02.328Z,1520502962.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:02.732Z,1520502962.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:03.129Z,1520502963.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:03.526Z,1520502963.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:03.926Z,1520502963.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:04.323Z,1520502964.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:04.725Z,1520502964.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:05.127Z,1520502965.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:05.528Z,1520502965.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:05.929Z,1520502965.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:06.323Z,1520502966.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:06.727Z,1520502966.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:07.119Z,1520502967.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:07.527Z,1520502967.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:07.926Z,1520502967.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:08.330Z,1520502968.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:08.733Z,1520502968.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:09.129Z,1520502969.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:09.518Z,1520502969.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:09.931Z,1520502969.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:10.327Z,1520502970.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:10.731Z,1520502970.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:11.134Z,1520502971.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:11.532Z,1520502971.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:11.932Z,1520502971.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:12.327Z,1520502972.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:12.727Z,1520502972.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:13.123Z,1520502973.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:13.527Z,1520502973.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:13.923Z,1520502973.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:14.332Z,1520502974.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:14.736Z,1520502974.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:15.142Z,1520502975.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:15.524Z,1520502975.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:15.923Z,1520502975.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:16.325Z,1520502976.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:16.731Z,1520502976.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:17.129Z,1520502977.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:17.542Z,1520502977.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:17.937Z,1520502977.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:18.323Z,1520502978.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:18.723Z,1520502978.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:19.140Z,1520502979.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:19.529Z,1520502979.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:19.923Z,1520502979.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:20.337Z,1520502980.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:20.733Z,1520502980.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:21.133Z,1520502981.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:21.524Z,1520502981.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:21.929Z,1520502981.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:22.331Z,1520502982.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:22.725Z,1520502982.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:23.149Z,1520502983.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:23.542Z,1520502983.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:23.938Z,1520502983.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:24.336Z,1520502984.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:24.733Z,1520502984.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:25.135Z,1520502985.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:25.538Z,1520502985.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:25.935Z,1520502985.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:26.341Z,1520502986.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:26.746Z,1520502986.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:27.150Z,1520502987.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:27.517Z,1520502987.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:27.909Z,1520502987.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:28.338Z,1520502988.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:28.721Z,1520502988.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:29.121Z,1520502989.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:29.543Z,1520502989.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:29.943Z,1520502989.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:30.346Z,1520502990.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:30.746Z,1520502990.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:31.113Z,1520502991.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:31.543Z,1520502991.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:31.920Z,1520502991.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:32.345Z,1520502992.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:32.746Z,1520502992.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:33.128Z,1520502993.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:33.522Z,1520502993.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:33.918Z,1520502993.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:34.326Z,1520502994.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:34.726Z,1520502994.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:35.120Z,1520502995.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:35.532Z,1520502995.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:35.959Z,1520502995.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:36.326Z,1520502996.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:36.722Z,1520502996.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:37.127Z,1520502997.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:37.527Z,1520502997.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:37.931Z,1520502997.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:38.332Z,1520502998.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:38.732Z,1520502998.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:39.138Z,1520502999.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:39.528Z,1520502999.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:39.919Z,1520502999.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:40.320Z,1520503000.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:40.728Z,1520503000.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:41.132Z,1520503001.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:41.535Z,1520503001.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:41.944Z,1520503001.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:42.327Z,1520503002.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:42.723Z,1520503002.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:43.082Z,1520503003.082 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-03-08T09:56:43.082Z,1520503003.082 [DropWeight] Hardware Fault, FailCount= 1
2018-03-08T09:56:43.082Z,1520503003.082 [DropWeight](ERROR): Hardware Fault
2018-03-08T09:56:43.143Z,1520503003.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:43.174Z,1520503003.174 [CBIT](INFO): Critical error at 20180308T095643
2018-03-08T09:56:43.176Z,1520503003.176 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-03-08T09:56:43.189Z,1520503003.189 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-03-08T09:56:43.530Z,1520503003.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:43.541Z,1520503003.541 [CBIT](INFO): Critical error at 20180308T095643
2018-03-08T09:56:43.931Z,1520503003.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:44.337Z,1520503004.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:44.744Z,1520503004.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:45.136Z,1520503005.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:45.526Z,1520503005.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:45.938Z,1520503005.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:46.338Z,1520503006.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:46.722Z,1520503006.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:47.163Z,1520503007.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:47.547Z,1520503007.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:47.946Z,1520503007.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:48.323Z,1520503008.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:48.723Z,1520503008.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:51.824Z,1520503011.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:51.955Z,1520503011.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:52.349Z,1520503012.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:52.750Z,1520503012.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:53.147Z,1520503013.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:53.551Z,1520503013.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:53.926Z,1520503013.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:54.324Z,1520503014.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:54.723Z,1520503014.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:55.125Z,1520503015.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:55.529Z,1520503015.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:55.957Z,1520503015.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:56.321Z,1520503016.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:56.723Z,1520503016.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:57.123Z,1520503017.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:57.522Z,1520503017.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:57.926Z,1520503017.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:58.324Z,1520503018.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:58.735Z,1520503018.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:59.124Z,1520503019.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:59.529Z,1520503019.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:56:59.925Z,1520503019.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:00.325Z,1520503020.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:00.777Z,1520503020.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:01.156Z,1520503021.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:01.532Z,1520503021.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:01.929Z,1520503021.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:02.325Z,1520503022.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:02.731Z,1520503022.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:03.125Z,1520503023.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:03.522Z,1520503023.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:03.925Z,1520503023.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:04.330Z,1520503024.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:04.731Z,1520503024.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:05.129Z,1520503025.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:05.530Z,1520503025.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:05.925Z,1520503025.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:06.325Z,1520503026.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:06.726Z,1520503026.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:07.127Z,1520503027.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:07.532Z,1520503027.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:07.928Z,1520503027.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:08.325Z,1520503028.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:08.725Z,1520503028.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:09.121Z,1520503029.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:09.523Z,1520503029.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:09.925Z,1520503029.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:10.334Z,1520503030.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:10.730Z,1520503030.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:11.135Z,1520503031.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:11.522Z,1520503031.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:11.925Z,1520503031.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:12.327Z,1520503032.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:12.725Z,1520503032.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:13.131Z,1520503033.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:13.532Z,1520503033.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:13.934Z,1520503033.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:14.326Z,1520503034.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:14.730Z,1520503034.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:15.130Z,1520503035.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:15.526Z,1520503035.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:15.923Z,1520503035.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:16.365Z,1520503036.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:16.738Z,1520503036.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:17.142Z,1520503037.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:17.530Z,1520503037.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:17.925Z,1520503037.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:18.323Z,1520503038.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:18.723Z,1520503038.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:19.132Z,1520503039.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:19.539Z,1520503039.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:19.942Z,1520503039.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:20.325Z,1520503040.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:20.731Z,1520503040.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:21.130Z,1520503041.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:21.522Z,1520503041.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:21.930Z,1520503041.930 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:21.931Z,1520503041.931 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45
2018-03-08T09:57:21.931Z,1520503041.931 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T09:57:21.933Z,1520503041.933 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:21.933Z,1520503041.933 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45
2018-03-08T09:57:21.933Z,1520503041.933 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T09:57:21.934Z,1520503041.934 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:21.935Z,1520503041.935 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 45
2018-03-08T09:57:21.935Z,1520503041.935 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T09:57:21.966Z,1520503041.966 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T09:57:21.967Z,1520503041.967 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T09:57:21.967Z,1520503041.967 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T09:57:22.345Z,1520503042.345 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T09:57:22.345Z,1520503042.345 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45
2018-03-08T09:57:22.346Z,1520503042.346 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T09:57:22.346Z,1520503042.346 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45
2018-03-08T09:57:22.346Z,1520503042.346 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T09:57:22.346Z,1520503042.346 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 45
2018-03-08T09:57:22.735Z,1520503042.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T09:57:22.735Z,1520503042.735 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:57:22.736Z,1520503042.736 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:57:22.736Z,1520503042.736 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T09:57:22.737Z,1520503042.737 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:57:22.737Z,1520503042.737 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:57:22.737Z,1520503042.737 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T09:57:22.738Z,1520503042.738 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T09:57:22.738Z,1520503042.738 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T09:57:23.143Z,1520503043.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T09:57:23.144Z,1520503043.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:23.518Z,1520503043.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T09:57:23.519Z,1520503043.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:23.920Z,1520503043.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T09:57:23.921Z,1520503043.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:24.366Z,1520503044.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T09:57:24.367Z,1520503044.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:24.742Z,1520503044.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T09:57:24.743Z,1520503044.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:25.148Z,1520503045.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T09:57:25.149Z,1520503045.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:25.545Z,1520503045.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T09:57:25.546Z,1520503045.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:25.938Z,1520503045.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T09:57:25.939Z,1520503045.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:26.325Z,1520503046.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T09:57:26.326Z,1520503046.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:26.734Z,1520503046.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T09:57:26.735Z,1520503046.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:27.169Z,1520503047.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T09:57:27.170Z,1520503047.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:27.526Z,1520503047.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T09:57:27.526Z,1520503047.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:27.934Z,1520503047.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T09:57:27.935Z,1520503047.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:28.342Z,1520503048.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T09:57:28.343Z,1520503048.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:28.738Z,1520503048.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T09:57:28.738Z,1520503048.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:29.132Z,1520503049.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T09:57:29.134Z,1520503049.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:29.530Z,1520503049.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T09:57:29.531Z,1520503049.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:29.934Z,1520503049.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T09:57:29.935Z,1520503049.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:30.333Z,1520503050.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T09:57:30.334Z,1520503050.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:30.733Z,1520503050.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T09:57:30.734Z,1520503050.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:31.142Z,1520503051.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T09:57:31.143Z,1520503051.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:31.538Z,1520503051.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T09:57:31.539Z,1520503051.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:31.937Z,1520503051.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T09:57:31.937Z,1520503051.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:32.335Z,1520503052.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T09:57:32.336Z,1520503052.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:32.711Z,1520503052.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T09:57:32.712Z,1520503052.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:33.138Z,1520503053.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T09:57:33.139Z,1520503053.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:33.517Z,1520503053.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T09:57:33.518Z,1520503053.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:33.911Z,1520503053.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T09:57:33.912Z,1520503053.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:34.347Z,1520503054.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T09:57:34.348Z,1520503054.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:34.739Z,1520503054.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T09:57:34.740Z,1520503054.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:35.135Z,1520503055.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T09:57:35.136Z,1520503055.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:35.519Z,1520503055.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T09:57:35.520Z,1520503055.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:35.918Z,1520503055.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T09:57:35.919Z,1520503055.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:36.322Z,1520503056.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T09:57:36.323Z,1520503056.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:36.720Z,1520503056.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T09:57:36.721Z,1520503056.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:37.143Z,1520503057.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T09:57:37.154Z,1520503057.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:37.526Z,1520503057.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T09:57:37.527Z,1520503057.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:37.950Z,1520503057.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T09:57:37.951Z,1520503057.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:38.319Z,1520503058.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T09:57:38.320Z,1520503058.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:38.726Z,1520503058.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T09:57:38.727Z,1520503058.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:39.122Z,1520503059.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T09:57:39.123Z,1520503059.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:39.527Z,1520503059.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T09:57:39.528Z,1520503059.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:39.925Z,1520503059.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T09:57:39.926Z,1520503059.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:40.332Z,1520503060.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T09:57:40.333Z,1520503060.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:40.727Z,1520503060.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T09:57:40.728Z,1520503060.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:41.126Z,1520503061.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T09:57:41.127Z,1520503061.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:41.521Z,1520503061.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T09:57:41.522Z,1520503061.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:41.921Z,1520503061.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T09:57:41.922Z,1520503061.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:42.326Z,1520503062.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:42.721Z,1520503062.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:43.127Z,1520503063.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:43.530Z,1520503063.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:43.930Z,1520503063.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:44.325Z,1520503064.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:44.725Z,1520503064.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:45.130Z,1520503065.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:45.522Z,1520503065.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:45.921Z,1520503065.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:46.331Z,1520503066.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:46.731Z,1520503066.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:47.131Z,1520503067.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:47.525Z,1520503067.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:47.926Z,1520503067.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:48.326Z,1520503068.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:48.725Z,1520503068.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:52.681Z,1520503072.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:52.833Z,1520503072.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:53.226Z,1520503073.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:53.614Z,1520503073.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:54.014Z,1520503074.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:54.412Z,1520503074.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:54.826Z,1520503074.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:55.199Z,1520503075.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:55.619Z,1520503075.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:56.030Z,1520503076.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:56.394Z,1520503076.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:56.800Z,1520503076.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:57.218Z,1520503077.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:57.601Z,1520503077.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:57.998Z,1520503077.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:58.433Z,1520503078.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:58.842Z,1520503078.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:59.232Z,1520503079.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:57:59.623Z,1520503079.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:00.005Z,1520503080.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:00.412Z,1520503080.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:00.823Z,1520503080.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:01.221Z,1520503081.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:01.616Z,1520503081.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:02.023Z,1520503082.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:02.409Z,1520503082.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:02.809Z,1520503082.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:03.211Z,1520503083.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:03.616Z,1520503083.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:04.009Z,1520503084.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:04.416Z,1520503084.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:04.821Z,1520503084.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:05.223Z,1520503085.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:05.615Z,1520503085.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:06.009Z,1520503086.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:06.408Z,1520503086.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:06.815Z,1520503086.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:07.223Z,1520503087.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:07.618Z,1520503087.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:08.019Z,1520503088.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:08.414Z,1520503088.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:08.811Z,1520503088.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:09.211Z,1520503089.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:09.615Z,1520503089.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:10.022Z,1520503090.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:10.426Z,1520503090.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:10.818Z,1520503090.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:11.218Z,1520503091.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:11.624Z,1520503091.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:12.015Z,1520503092.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:12.419Z,1520503092.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:12.816Z,1520503092.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:13.223Z,1520503093.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:13.615Z,1520503093.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:14.019Z,1520503094.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:14.414Z,1520503094.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:14.822Z,1520503094.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:15.217Z,1520503095.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:15.610Z,1520503095.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:16.020Z,1520503096.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:16.424Z,1520503096.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:16.815Z,1520503096.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:17.227Z,1520503097.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:17.602Z,1520503097.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:18.022Z,1520503098.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:18.427Z,1520503098.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:18.801Z,1520503098.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:19.231Z,1520503099.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:19.626Z,1520503099.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:20.019Z,1520503100.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:20.407Z,1520503100.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:20.803Z,1520503100.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:21.208Z,1520503101.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:21.603Z,1520503101.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:22.002Z,1520503102.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:22.431Z,1520503102.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:22.831Z,1520503102.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:23.229Z,1520503103.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:23.596Z,1520503103.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:24.004Z,1520503104.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:24.424Z,1520503104.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:24.807Z,1520503104.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:25.230Z,1520503105.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:25.629Z,1520503105.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:26.024Z,1520503106.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:26.430Z,1520503106.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:26.802Z,1520503106.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:27.203Z,1520503107.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:27.625Z,1520503107.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:28.030Z,1520503108.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:28.412Z,1520503108.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:28.822Z,1520503108.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:29.223Z,1520503109.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:29.611Z,1520503109.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:29.997Z,1520503109.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:30.404Z,1520503110.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:30.811Z,1520503110.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:31.234Z,1520503111.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:31.612Z,1520503111.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:32.010Z,1520503112.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:32.429Z,1520503112.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:32.826Z,1520503112.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:33.206Z,1520503113.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:33.611Z,1520503113.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:34.029Z,1520503114.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:34.428Z,1520503114.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:34.811Z,1520503114.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:35.209Z,1520503115.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:35.627Z,1520503115.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:36.026Z,1520503116.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:36.402Z,1520503116.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:36.804Z,1520503116.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:37.231Z,1520503117.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:37.610Z,1520503117.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:38.007Z,1520503118.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:38.405Z,1520503118.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:38.829Z,1520503118.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:39.205Z,1520503119.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:39.605Z,1520503119.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:40.005Z,1520503120.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:40.430Z,1520503120.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:40.834Z,1520503120.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:41.207Z,1520503121.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:41.605Z,1520503121.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:42.029Z,1520503122.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:42.405Z,1520503122.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:42.806Z,1520503122.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:43.211Z,1520503123.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:43.613Z,1520503123.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:44.007Z,1520503124.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:44.406Z,1520503124.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:44.800Z,1520503124.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:45.215Z,1520503125.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:45.630Z,1520503125.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:46.011Z,1520503126.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:46.407Z,1520503126.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:46.813Z,1520503126.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:47.207Z,1520503127.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:47.609Z,1520503127.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:48.011Z,1520503128.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:48.427Z,1520503128.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:48.815Z,1520503128.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:51.933Z,1520503131.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:52.053Z,1520503132.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:52.432Z,1520503132.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:52.807Z,1520503132.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:53.229Z,1520503133.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:53.627Z,1520503133.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:53.000Z,1520503134.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:54.433Z,1520503134.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:54.836Z,1520503134.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:55.205Z,1520503135.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:55.607Z,1520503135.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:56.005Z,1520503136.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:56.410Z,1520503136.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:56.807Z,1520503136.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:57.212Z,1520503137.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:57.614Z,1520503137.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:58.019Z,1520503138.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:58.409Z,1520503138.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:58.811Z,1520503138.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:59.204Z,1520503139.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:58:59.637Z,1520503139.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:00.018Z,1520503140.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:00.415Z,1520503140.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:00.812Z,1520503140.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:01.214Z,1520503141.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:01.604Z,1520503141.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:02.005Z,1520503142.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:02.409Z,1520503142.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:02.822Z,1520503142.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:03.242Z,1520503143.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:03.619Z,1520503143.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:04.052Z,1520503144.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:04.415Z,1520503144.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:04.839Z,1520503144.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:05.208Z,1520503145.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:05.603Z,1520503145.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:06.018Z,1520503146.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:06.446Z,1520503146.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:06.819Z,1520503146.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:07.213Z,1520503147.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:07.611Z,1520503147.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:08.017Z,1520503148.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:08.404Z,1520503148.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:08.804Z,1520503148.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:09.216Z,1520503149.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:09.626Z,1520503149.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:10.022Z,1520503150.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:10.408Z,1520503150.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:10.818Z,1520503150.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:11.226Z,1520503151.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:11.606Z,1520503151.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:12.004Z,1520503152.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:12.417Z,1520503152.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:12.821Z,1520503152.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:13.217Z,1520503153.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:13.609Z,1520503153.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:14.010Z,1520503154.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:14.403Z,1520503154.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:14.822Z,1520503154.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:15.227Z,1520503155.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:15.614Z,1520503155.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:16.022Z,1520503156.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:16.409Z,1520503156.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:16.809Z,1520503156.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:17.217Z,1520503157.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:17.609Z,1520503157.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:18.010Z,1520503158.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:18.417Z,1520503158.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:18.825Z,1520503158.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:19.214Z,1520503159.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:19.613Z,1520503159.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:20.004Z,1520503160.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:20.412Z,1520503160.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:20.808Z,1520503160.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:21.214Z,1520503161.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:21.612Z,1520503161.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:22.016Z,1520503162.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:22.410Z,1520503162.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:22.826Z,1520503162.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:23.209Z,1520503163.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:23.614Z,1520503163.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:24.012Z,1520503164.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:24.418Z,1520503164.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:24.821Z,1520503164.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:25.219Z,1520503165.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:25.611Z,1520503165.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:26.007Z,1520503166.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:26.418Z,1520503166.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:26.814Z,1520503166.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:27.220Z,1520503167.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:27.616Z,1520503167.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:28.027Z,1520503168.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:28.417Z,1520503168.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:28.815Z,1520503168.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:29.219Z,1520503169.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:29.615Z,1520503169.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:30.026Z,1520503170.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:30.423Z,1520503170.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:30.820Z,1520503170.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:31.214Z,1520503171.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:31.627Z,1520503171.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:32.020Z,1520503172.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:32.399Z,1520503172.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:32.807Z,1520503172.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:33.229Z,1520503173.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:33.604Z,1520503173.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:34.030Z,1520503174.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:34.406Z,1520503174.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:34.828Z,1520503174.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:35.226Z,1520503175.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:35.611Z,1520503175.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:36.003Z,1520503176.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:36.413Z,1520503176.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:36.815Z,1520503176.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:37.227Z,1520503177.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:37.607Z,1520503177.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:38.011Z,1520503178.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:38.409Z,1520503178.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:38.809Z,1520503178.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:39.208Z,1520503179.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:39.614Z,1520503179.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:40.014Z,1520503180.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:40.409Z,1520503180.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:40.808Z,1520503180.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:41.218Z,1520503181.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:41.630Z,1520503181.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:42.002Z,1520503182.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:42.413Z,1520503182.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:42.815Z,1520503182.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:43.219Z,1520503183.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:43.615Z,1520503183.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:44.007Z,1520503184.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:44.411Z,1520503184.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:44.808Z,1520503184.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:45.215Z,1520503185.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:45.617Z,1520503185.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:46.019Z,1520503186.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:46.410Z,1520503186.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:46.803Z,1520503186.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:47.206Z,1520503187.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:47.611Z,1520503187.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:48.001Z,1520503188.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:48.415Z,1520503188.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:48.815Z,1520503188.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:48.819Z,1520503188.819 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T09:54:48.7Z
2018-03-08T09:59:48.819Z,1520503188.819 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T09:59:48.819Z,1520503188.819 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T09:59:51.921Z,1520503191.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:52.261Z,1520503192.261 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20180308T074127/Courier0052.lzma
2018-03-08T09:59:52.305Z,1520503192.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:52.612Z,1520503192.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:52.967Z,1520503192.967 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0052.lzma.bak
2018-03-08T09:59:52.967Z,1520503192.967 [DataOverHttps](INFO): SBD MOMSN=7984709
2018-03-08T09:59:53.028Z,1520503193.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:53.584Z,1520503193.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:53.830Z,1520503193.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:56.929Z,1520503196.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:57.078Z,1520503197.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:57.454Z,1520503197.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:57.821Z,1520503197.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:58.229Z,1520503198.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:58.629Z,1520503198.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T09:59:59.029Z,1520503199.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:02.142Z,1520503202.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:02.242Z,1520503202.242 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0053.lzma
2018-03-08T10:00:02.326Z,1520503202.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:02.676Z,1520503202.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:03.011Z,1520503203.011 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0053.lzma.bak
2018-03-08T10:00:03.011Z,1520503203.011 [DataOverHttps](INFO): SBD MOMSN=7984713
2018-03-08T10:00:03.048Z,1520503203.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:03.642Z,1520503203.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:03.646Z,1520503203.646 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T10:00:03.646Z,1520503203.646 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T10:00:03.646Z,1520503203.646 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T10:00:03.878Z,1520503203.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:06.982Z,1520503206.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:07.123Z,1520503207.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:07.479Z,1520503207.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:07.845Z,1520503207.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:08.272Z,1520503208.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:08.675Z,1520503208.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:09.081Z,1520503209.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:09.460Z,1520503209.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:09.882Z,1520503209.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:10.255Z,1520503210.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:10.651Z,1520503210.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:11.082Z,1520503211.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:11.483Z,1520503211.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:11.864Z,1520503211.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:12.253Z,1520503212.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:12.649Z,1520503212.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:13.085Z,1520503213.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:13.464Z,1520503213.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:13.863Z,1520503213.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:14.255Z,1520503214.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:14.663Z,1520503214.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:15.063Z,1520503215.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:15.464Z,1520503215.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:15.864Z,1520503215.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:16.254Z,1520503216.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:16.663Z,1520503216.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:17.067Z,1520503217.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:17.463Z,1520503217.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:17.863Z,1520503217.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:18.258Z,1520503218.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:18.658Z,1520503218.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:19.063Z,1520503219.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:19.467Z,1520503219.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:19.863Z,1520503219.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:20.258Z,1520503220.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:20.658Z,1520503220.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:21.060Z,1520503221.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:21.464Z,1520503221.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:21.863Z,1520503221.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:22.258Z,1520503222.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:22.662Z,1520503222.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:23.067Z,1520503223.067 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:23.067Z,1520503223.067 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46
2018-03-08T10:00:23.067Z,1520503223.067 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T10:00:23.069Z,1520503223.069 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:23.069Z,1520503223.069 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46
2018-03-08T10:00:23.069Z,1520503223.069 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T10:00:23.070Z,1520503223.070 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:23.071Z,1520503223.071 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 46
2018-03-08T10:00:23.071Z,1520503223.071 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T10:00:23.103Z,1520503223.103 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T10:00:23.103Z,1520503223.103 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T10:00:23.103Z,1520503223.103 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T10:00:23.510Z,1520503223.510 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T10:00:23.510Z,1520503223.510 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46
2018-03-08T10:00:23.510Z,1520503223.510 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T10:00:23.511Z,1520503223.511 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46
2018-03-08T10:00:23.511Z,1520503223.511 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T10:00:23.511Z,1520503223.511 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 46
2018-03-08T10:00:23.866Z,1520503223.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T10:00:23.867Z,1520503223.867 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:00:23.867Z,1520503223.867 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:00:23.867Z,1520503223.867 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T10:00:23.868Z,1520503223.868 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:00:23.868Z,1520503223.868 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:00:23.869Z,1520503223.869 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T10:00:23.869Z,1520503223.869 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:00:23.869Z,1520503223.869 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:00:24.265Z,1520503224.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T10:00:24.266Z,1520503224.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:24.658Z,1520503224.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T10:00:24.659Z,1520503224.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:25.067Z,1520503225.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T10:00:25.068Z,1520503225.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:25.467Z,1520503225.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T10:00:25.468Z,1520503225.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:25.863Z,1520503225.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T10:00:25.864Z,1520503225.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:26.261Z,1520503226.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T10:00:26.262Z,1520503226.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:26.661Z,1520503226.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T10:00:26.662Z,1520503226.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:27.060Z,1520503227.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T10:00:27.061Z,1520503227.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:27.469Z,1520503227.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T10:00:27.470Z,1520503227.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:27.864Z,1520503227.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T10:00:27.865Z,1520503227.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:28.263Z,1520503228.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T10:00:28.264Z,1520503228.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:28.657Z,1520503228.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T10:00:28.658Z,1520503228.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:29.078Z,1520503229.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T10:00:29.079Z,1520503229.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:29.469Z,1520503229.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T10:00:29.470Z,1520503229.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:29.870Z,1520503229.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T10:00:29.871Z,1520503229.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:30.258Z,1520503230.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T10:00:30.259Z,1520503230.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:30.658Z,1520503230.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T10:00:30.659Z,1520503230.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:31.074Z,1520503231.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T10:00:31.075Z,1520503231.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:31.528Z,1520503231.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-08T10:00:31.529Z,1520503231.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:31.869Z,1520503231.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T10:00:31.870Z,1520503231.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:32.261Z,1520503232.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T10:00:32.262Z,1520503232.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:32.655Z,1520503232.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T10:00:32.656Z,1520503232.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:33.069Z,1520503233.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T10:00:33.070Z,1520503233.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:33.503Z,1520503233.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T10:00:33.505Z,1520503233.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:33.874Z,1520503233.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T10:00:33.875Z,1520503233.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:34.261Z,1520503234.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T10:00:34.262Z,1520503234.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:34.655Z,1520503234.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T10:00:34.656Z,1520503234.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:35.074Z,1520503235.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T10:00:35.075Z,1520503235.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:35.474Z,1520503235.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T10:00:35.475Z,1520503235.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:35.870Z,1520503235.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T10:00:35.871Z,1520503235.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:36.302Z,1520503236.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T10:00:36.303Z,1520503236.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:36.652Z,1520503236.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T10:00:36.653Z,1520503236.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:37.074Z,1520503237.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T10:00:37.075Z,1520503237.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:37.467Z,1520503237.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T10:00:37.468Z,1520503237.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:37.861Z,1520503237.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T10:00:37.862Z,1520503237.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:38.255Z,1520503238.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T10:00:38.256Z,1520503238.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:38.660Z,1520503238.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T10:00:38.661Z,1520503238.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:39.068Z,1520503239.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T10:00:39.070Z,1520503239.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:39.459Z,1520503239.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T10:00:39.460Z,1520503239.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:39.868Z,1520503239.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T10:00:39.873Z,1520503239.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:40.260Z,1520503240.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T10:00:40.261Z,1520503240.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:40.660Z,1520503240.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T10:00:40.661Z,1520503240.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:41.066Z,1520503241.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T10:00:41.067Z,1520503241.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:41.470Z,1520503241.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T10:00:41.471Z,1520503241.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:41.868Z,1520503241.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T10:00:41.869Z,1520503241.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:42.262Z,1520503242.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T10:00:42.263Z,1520503242.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:42.659Z,1520503242.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T10:00:42.660Z,1520503242.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:43.064Z,1520503243.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T10:00:43.065Z,1520503243.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:43.468Z,1520503243.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:43.865Z,1520503243.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:44.260Z,1520503244.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:44.661Z,1520503244.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:45.065Z,1520503245.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:45.464Z,1520503245.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:45.865Z,1520503245.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:46.265Z,1520503246.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:46.640Z,1520503246.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:47.068Z,1520503247.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:47.471Z,1520503247.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:47.868Z,1520503247.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:48.262Z,1520503248.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:48.673Z,1520503248.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:49.068Z,1520503249.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:49.478Z,1520503249.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:49.875Z,1520503249.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:50.250Z,1520503250.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:50.654Z,1520503250.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:51.082Z,1520503251.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:51.456Z,1520503251.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:51.879Z,1520503251.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:52.258Z,1520503252.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:52.651Z,1520503252.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:53.074Z,1520503253.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:53.479Z,1520503253.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:53.878Z,1520503253.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:54.258Z,1520503254.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:54.650Z,1520503254.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:55.057Z,1520503255.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:55.474Z,1520503255.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:55.860Z,1520503255.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:56.258Z,1520503256.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:56.651Z,1520503256.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:57.060Z,1520503257.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:57.456Z,1520503257.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:57.882Z,1520503257.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:58.254Z,1520503258.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:58.648Z,1520503258.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:59.082Z,1520503259.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:59.484Z,1520503259.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:00:59.864Z,1520503259.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:00.254Z,1520503260.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:00.666Z,1520503260.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:01.063Z,1520503261.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:01.468Z,1520503261.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:01.866Z,1520503261.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:02.249Z,1520503262.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:02.662Z,1520503262.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:03.058Z,1520503263.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:03.465Z,1520503263.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:03.867Z,1520503263.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:04.267Z,1520503264.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:07.353Z,1520503267.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:07.495Z,1520503267.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:07.849Z,1520503267.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:08.252Z,1520503268.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:08.649Z,1520503268.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:09.031Z,1520503269.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:09.425Z,1520503269.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:09.820Z,1520503269.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:10.225Z,1520503270.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:10.630Z,1520503270.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:11.025Z,1520503271.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:11.424Z,1520503271.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:11.821Z,1520503271.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:12.230Z,1520503272.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:12.625Z,1520503272.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:13.022Z,1520503273.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:13.427Z,1520503273.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:13.853Z,1520503273.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:14.236Z,1520503274.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:14.622Z,1520503274.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:15.025Z,1520503275.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:15.419Z,1520503275.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:15.825Z,1520503275.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:16.227Z,1520503276.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:16.632Z,1520503276.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:17.027Z,1520503277.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:17.426Z,1520503277.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:17.822Z,1520503277.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:18.217Z,1520503278.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:18.623Z,1520503278.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:19.025Z,1520503279.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:19.431Z,1520503279.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:19.832Z,1520503279.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:20.229Z,1520503280.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:20.623Z,1520503280.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:21.027Z,1520503281.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:21.425Z,1520503281.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:21.819Z,1520503281.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:22.229Z,1520503282.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:22.632Z,1520503282.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:23.028Z,1520503283.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:23.421Z,1520503283.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:23.822Z,1520503283.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:24.219Z,1520503284.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:24.622Z,1520503284.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:25.025Z,1520503285.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:25.431Z,1520503285.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:25.832Z,1520503285.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:26.230Z,1520503286.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:26.623Z,1520503286.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:27.022Z,1520503287.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:27.424Z,1520503287.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:27.826Z,1520503287.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:28.258Z,1520503288.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:28.632Z,1520503288.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:29.031Z,1520503289.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:29.425Z,1520503289.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:29.826Z,1520503289.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:30.217Z,1520503290.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:30.623Z,1520503290.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:31.025Z,1520503291.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:31.431Z,1520503291.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:31.833Z,1520503291.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:32.228Z,1520503292.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:32.621Z,1520503292.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:33.021Z,1520503293.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:33.418Z,1520503293.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:33.825Z,1520503293.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:34.231Z,1520503294.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:34.631Z,1520503294.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:35.029Z,1520503295.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:35.431Z,1520503295.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:35.825Z,1520503295.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:36.219Z,1520503296.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:36.624Z,1520503296.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:37.025Z,1520503297.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:37.427Z,1520503297.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:37.832Z,1520503297.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:38.230Z,1520503298.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:38.616Z,1520503298.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:39.021Z,1520503299.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:39.424Z,1520503299.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:39.831Z,1520503299.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:40.229Z,1520503300.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:40.628Z,1520503300.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:41.027Z,1520503301.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:41.422Z,1520503301.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:41.826Z,1520503301.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:42.223Z,1520503302.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:42.631Z,1520503302.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:42.663Z,1520503302.663 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T10:01:43.028Z,1520503303.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:43.439Z,1520503303.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:43.833Z,1520503303.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:44.232Z,1520503304.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:44.624Z,1520503304.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:45.031Z,1520503305.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:45.420Z,1520503305.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:45.831Z,1520503305.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:46.247Z,1520503306.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:46.639Z,1520503306.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:47.039Z,1520503307.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:47.427Z,1520503307.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:47.820Z,1520503307.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:48.222Z,1520503308.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:48.631Z,1520503308.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:49.026Z,1520503309.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:49.433Z,1520503309.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:49.842Z,1520503309.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:50.236Z,1520503310.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:50.629Z,1520503310.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:51.029Z,1520503311.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:51.427Z,1520503311.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:51.831Z,1520503311.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:52.245Z,1520503312.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:52.641Z,1520503312.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:53.032Z,1520503313.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:53.427Z,1520503313.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:53.826Z,1520503313.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:54.219Z,1520503314.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:54.627Z,1520503314.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:55.030Z,1520503315.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:55.437Z,1520503315.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:55.836Z,1520503315.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:56.238Z,1520503316.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:56.619Z,1520503316.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:57.032Z,1520503317.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:57.437Z,1520503317.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:57.876Z,1520503317.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:58.246Z,1520503318.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:58.646Z,1520503318.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:59.031Z,1520503319.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:59.433Z,1520503319.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:01:59.834Z,1520503319.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:00.207Z,1520503320.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:00.614Z,1520503320.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:01.043Z,1520503321.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:01.447Z,1520503321.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:01.860Z,1520503321.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:02.246Z,1520503322.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:02.621Z,1520503322.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:03.022Z,1520503323.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:03.424Z,1520503323.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:03.818Z,1520503323.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:04.242Z,1520503324.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:04.644Z,1520503324.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:07.721Z,1520503327.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:07.850Z,1520503327.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:08.221Z,1520503328.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:08.622Z,1520503328.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:09.019Z,1520503329.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:09.454Z,1520503329.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:09.827Z,1520503329.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:10.223Z,1520503330.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:10.618Z,1520503330.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:11.013Z,1520503331.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:11.418Z,1520503331.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:11.818Z,1520503331.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:12.222Z,1520503332.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:12.631Z,1520503332.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:13.028Z,1520503333.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:13.408Z,1520503333.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:13.815Z,1520503333.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:14.221Z,1520503334.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:14.613Z,1520503334.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:15.016Z,1520503335.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:15.431Z,1520503335.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:15.827Z,1520503335.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:16.223Z,1520503336.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:16.622Z,1520503336.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:17.018Z,1520503337.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:17.416Z,1520503337.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:17.822Z,1520503337.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:18.221Z,1520503338.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:18.627Z,1520503338.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:19.035Z,1520503339.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:19.418Z,1520503339.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:19.817Z,1520503339.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:20.226Z,1520503340.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:20.619Z,1520503340.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:21.007Z,1520503341.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:21.421Z,1520503341.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:21.817Z,1520503341.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:22.221Z,1520503342.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:22.631Z,1520503342.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:23.015Z,1520503343.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:23.415Z,1520503343.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:23.806Z,1520503343.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:24.220Z,1520503344.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:24.620Z,1520503344.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:25.020Z,1520503345.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:25.431Z,1520503345.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:25.807Z,1520503345.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:26.205Z,1520503346.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:26.623Z,1520503346.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:27.023Z,1520503347.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:27.422Z,1520503347.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:27.820Z,1520503347.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:28.221Z,1520503348.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:28.619Z,1520503348.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:29.018Z,1520503349.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:29.422Z,1520503349.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:29.819Z,1520503349.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:30.221Z,1520503350.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:30.621Z,1520503350.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:31.020Z,1520503351.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:31.410Z,1520503351.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:31.823Z,1520503351.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:32.217Z,1520503352.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:32.610Z,1520503352.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:33.017Z,1520503353.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:33.421Z,1520503353.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:33.824Z,1520503353.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:34.220Z,1520503354.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:34.617Z,1520503354.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:35.022Z,1520503355.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:35.423Z,1520503355.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:35.818Z,1520503355.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:36.221Z,1520503356.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:36.624Z,1520503356.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:37.026Z,1520503357.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:37.418Z,1520503357.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:37.822Z,1520503357.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:38.218Z,1520503358.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:38.623Z,1520503358.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:39.017Z,1520503359.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:39.419Z,1520503359.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:39.824Z,1520503359.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:40.220Z,1520503360.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:40.618Z,1520503360.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:41.022Z,1520503361.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:41.422Z,1520503361.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:41.818Z,1520503361.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:42.221Z,1520503362.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:42.624Z,1520503362.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:43.026Z,1520503363.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:43.422Z,1520503363.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:43.815Z,1520503363.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:44.217Z,1520503364.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:44.623Z,1520503364.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:45.017Z,1520503365.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:45.420Z,1520503365.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:45.824Z,1520503365.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:46.220Z,1520503366.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:46.617Z,1520503366.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:47.017Z,1520503367.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:47.417Z,1520503367.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:47.822Z,1520503367.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:48.221Z,1520503368.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:48.620Z,1520503368.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:49.026Z,1520503369.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:49.415Z,1520503369.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:49.818Z,1520503369.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:50.217Z,1520503370.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:50.619Z,1520503370.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:51.017Z,1520503371.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:51.419Z,1520503371.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:51.824Z,1520503371.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:52.220Z,1520503372.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:52.618Z,1520503372.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:53.017Z,1520503373.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:53.422Z,1520503373.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:53.817Z,1520503373.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:54.221Z,1520503374.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:54.625Z,1520503374.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:55.026Z,1520503375.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:55.415Z,1520503375.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:55.817Z,1520503375.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:56.223Z,1520503376.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:56.623Z,1520503376.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:57.018Z,1520503377.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:57.424Z,1520503377.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:57.824Z,1520503377.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:58.230Z,1520503378.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:58.618Z,1520503378.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:59.015Z,1520503379.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:59.419Z,1520503379.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:02:59.817Z,1520503379.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:00.221Z,1520503380.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:00.621Z,1520503380.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:01.020Z,1520503381.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:01.419Z,1520503381.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:01.822Z,1520503381.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:02.218Z,1520503382.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:02.623Z,1520503382.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:03.013Z,1520503383.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:03.421Z,1520503383.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:03.824Z,1520503383.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:04.221Z,1520503384.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:04.619Z,1520503384.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:05.018Z,1520503385.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:08.117Z,1520503388.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:08.258Z,1520503388.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:08.606Z,1520503388.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:09.014Z,1520503389.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:09.403Z,1520503389.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:09.799Z,1520503389.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:10.179Z,1520503390.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:10.575Z,1520503390.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:10.983Z,1520503390.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:11.409Z,1520503391.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:11.807Z,1520503391.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:12.203Z,1520503392.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:12.611Z,1520503392.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:12.982Z,1520503392.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:13.386Z,1520503393.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:13.786Z,1520503393.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:14.185Z,1520503394.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:14.611Z,1520503394.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:15.010Z,1520503395.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:15.385Z,1520503395.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:15.786Z,1520503395.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:16.217Z,1520503396.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:16.581Z,1520503396.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:16.983Z,1520503396.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:17.396Z,1520503397.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:17.796Z,1520503397.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:18.193Z,1520503398.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:18.585Z,1520503398.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:18.983Z,1520503398.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:19.394Z,1520503399.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:19.789Z,1520503399.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:20.191Z,1520503400.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:20.599Z,1520503400.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:20.998Z,1520503400.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:21.382Z,1520503401.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:21.794Z,1520503401.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:22.190Z,1520503402.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:22.590Z,1520503402.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:22.991Z,1520503402.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:23.393Z,1520503403.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:23.791Z,1520503403.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:24.204Z,1520503404.204 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:24.220Z,1520503404.220 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47
2018-03-08T10:03:24.221Z,1520503404.221 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T10:03:24.222Z,1520503404.222 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:24.222Z,1520503404.222 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47
2018-03-08T10:03:24.223Z,1520503404.223 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T10:03:24.224Z,1520503404.224 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:24.229Z,1520503404.229 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 47
2018-03-08T10:03:24.229Z,1520503404.229 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T10:03:24.249Z,1520503404.249 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T10:03:24.249Z,1520503404.249 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T10:03:24.250Z,1520503404.250 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T10:03:24.608Z,1520503404.608 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T10:03:24.608Z,1520503404.608 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47
2018-03-08T10:03:24.608Z,1520503404.608 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T10:03:24.608Z,1520503404.608 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47
2018-03-08T10:03:24.625Z,1520503404.625 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T10:03:24.625Z,1520503404.625 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 47
2018-03-08T10:03:24.988Z,1520503404.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T10:03:24.989Z,1520503404.989 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:03:24.989Z,1520503404.989 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:03:24.990Z,1520503404.990 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T10:03:24.990Z,1520503404.990 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:03:24.990Z,1520503404.990 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:03:24.991Z,1520503404.991 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T10:03:24.991Z,1520503404.991 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:03:24.991Z,1520503404.991 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:03:25.394Z,1520503405.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T10:03:25.395Z,1520503405.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:25.787Z,1520503405.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T10:03:25.788Z,1520503405.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:26.203Z,1520503406.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T10:03:26.204Z,1520503406.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:26.606Z,1520503406.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T10:03:26.607Z,1520503406.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:27.006Z,1520503407.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T10:03:27.007Z,1520503407.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:27.389Z,1520503407.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T10:03:27.389Z,1520503407.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:27.793Z,1520503407.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T10:03:27.794Z,1520503407.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:28.191Z,1520503408.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T10:03:28.192Z,1520503408.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:28.590Z,1520503408.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T10:03:28.591Z,1520503408.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:28.994Z,1520503408.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T10:03:28.995Z,1520503408.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:29.404Z,1520503409.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T10:03:29.405Z,1520503409.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:29.802Z,1520503409.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T10:03:29.803Z,1520503409.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:30.199Z,1520503410.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T10:03:30.200Z,1520503410.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:30.593Z,1520503410.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T10:03:30.594Z,1520503410.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:30.995Z,1520503410.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T10:03:30.996Z,1520503410.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:31.391Z,1520503411.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T10:03:31.392Z,1520503411.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:31.794Z,1520503411.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T10:03:31.795Z,1520503411.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:32.206Z,1520503412.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T10:03:32.207Z,1520503412.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:32.599Z,1520503412.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T10:03:32.601Z,1520503412.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:33.001Z,1520503413.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T10:03:33.002Z,1520503413.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:33.393Z,1520503413.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T10:03:33.394Z,1520503413.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:33.792Z,1520503413.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T10:03:33.793Z,1520503413.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:34.197Z,1520503414.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T10:03:34.198Z,1520503414.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:34.588Z,1520503414.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T10:03:34.589Z,1520503414.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:34.994Z,1520503414.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T10:03:34.995Z,1520503414.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:35.414Z,1520503415.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T10:03:35.415Z,1520503415.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:35.805Z,1520503415.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T10:03:35.806Z,1520503415.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:36.206Z,1520503416.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T10:03:36.207Z,1520503416.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:36.594Z,1520503416.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T10:03:36.595Z,1520503416.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:36.990Z,1520503416.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T10:03:36.991Z,1520503416.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:37.393Z,1520503417.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T10:03:37.393Z,1520503417.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:37.810Z,1520503417.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T10:03:37.811Z,1520503417.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:38.206Z,1520503418.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T10:03:38.207Z,1520503418.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:38.610Z,1520503418.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T10:03:38.611Z,1520503418.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:39.002Z,1520503419.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T10:03:39.002Z,1520503419.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:39.386Z,1520503419.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T10:03:39.387Z,1520503419.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:39.797Z,1520503419.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T10:03:39.798Z,1520503419.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:40.204Z,1520503420.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T10:03:40.205Z,1520503420.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:40.605Z,1520503420.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T10:03:40.606Z,1520503420.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:40.986Z,1520503420.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T10:03:40.987Z,1520503420.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:41.412Z,1520503421.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T10:03:41.417Z,1520503421.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:41.814Z,1520503421.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T10:03:41.814Z,1520503421.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:42.214Z,1520503422.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T10:03:42.214Z,1520503422.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:42.588Z,1520503422.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T10:03:42.589Z,1520503422.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:42.985Z,1520503422.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T10:03:42.986Z,1520503422.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:43.390Z,1520503423.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T10:03:43.391Z,1520503423.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:43.788Z,1520503423.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T10:03:43.789Z,1520503423.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:44.193Z,1520503424.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T10:03:44.194Z,1520503424.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:44.618Z,1520503424.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:44.993Z,1520503424.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:45.388Z,1520503425.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:45.788Z,1520503425.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:46.187Z,1520503426.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:46.587Z,1520503426.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:46.988Z,1520503426.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:47.393Z,1520503427.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:47.792Z,1520503427.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:48.217Z,1520503428.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:48.590Z,1520503428.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:48.987Z,1520503428.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:49.391Z,1520503429.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:49.790Z,1520503429.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:50.192Z,1520503430.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:50.622Z,1520503430.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:50.992Z,1520503430.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:51.390Z,1520503431.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:51.790Z,1520503431.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:52.188Z,1520503432.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:52.586Z,1520503432.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:52.994Z,1520503432.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:53.392Z,1520503433.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:53.797Z,1520503433.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:54.223Z,1520503434.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:54.590Z,1520503434.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:54.985Z,1520503434.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:55.395Z,1520503435.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:55.790Z,1520503435.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:56.195Z,1520503436.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:56.596Z,1520503436.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:56.996Z,1520503436.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:57.395Z,1520503437.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:57.795Z,1520503437.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:58.190Z,1520503438.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:58.590Z,1520503438.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:58.994Z,1520503438.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:59.396Z,1520503439.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:03:59.796Z,1520503439.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:00.197Z,1520503440.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:00.586Z,1520503440.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:00.994Z,1520503440.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:01.390Z,1520503441.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:01.791Z,1520503441.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:02.225Z,1520503442.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:02.600Z,1520503442.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:02.995Z,1520503442.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:03.387Z,1520503443.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:03.798Z,1520503443.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:04.190Z,1520503444.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:04.591Z,1520503444.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:04.995Z,1520503444.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:05.396Z,1520503445.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:08.497Z,1520503448.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:08.639Z,1520503448.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:08.989Z,1520503448.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:09.387Z,1520503449.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:09.790Z,1520503449.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:10.193Z,1520503450.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:10.603Z,1520503450.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:10.997Z,1520503450.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:11.387Z,1520503451.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:11.795Z,1520503451.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:12.191Z,1520503452.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:12.590Z,1520503452.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:12.993Z,1520503452.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:13.398Z,1520503453.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:13.801Z,1520503453.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:14.206Z,1520503454.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:14.588Z,1520503454.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:14.990Z,1520503454.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:15.387Z,1520503455.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:15.793Z,1520503455.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:16.207Z,1520503456.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:16.544Z,1520503456.544 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T10:04:16.544Z,1520503456.544 [NAL9602] Data Fault, FailCount= 4
2018-03-08T10:04:16.544Z,1520503456.544 [NAL9602](ERROR): Data Fault
2018-03-08T10:04:16.597Z,1520503456.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:16.618Z,1520503456.618 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T10:04:16.948Z,1520503456.948 [NAL9602](INFO): Powering down
2018-03-08T10:04:17.005Z,1520503457.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:17.380Z,1520503457.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:17.807Z,1520503457.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:17.820Z,1520503457.820 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T10:04:17.820Z,1520503457.820 [NAL9602] No Fault, FailCount= 4
2018-03-08T10:04:18.182Z,1520503458.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:18.583Z,1520503458.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:18.976Z,1520503458.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:19.381Z,1520503459.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:19.784Z,1520503459.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:20.179Z,1520503460.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:20.582Z,1520503460.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:20.979Z,1520503460.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:21.385Z,1520503461.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:21.784Z,1520503461.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:22.182Z,1520503462.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:22.579Z,1520503462.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:22.984Z,1520503462.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:23.383Z,1520503463.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:23.782Z,1520503463.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:24.183Z,1520503464.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:24.583Z,1520503464.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:24.983Z,1520503464.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:25.383Z,1520503465.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:25.783Z,1520503465.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:26.178Z,1520503466.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:26.581Z,1520503466.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:26.980Z,1520503466.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:27.378Z,1520503467.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:27.781Z,1520503467.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:28.180Z,1520503468.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:28.578Z,1520503468.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:28.982Z,1520503468.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:29.380Z,1520503469.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:29.782Z,1520503469.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:30.183Z,1520503470.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:30.581Z,1520503470.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:30.982Z,1520503470.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:31.382Z,1520503471.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:31.782Z,1520503471.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:32.178Z,1520503472.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:32.583Z,1520503472.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:32.981Z,1520503472.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:33.378Z,1520503473.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:33.782Z,1520503473.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:34.182Z,1520503474.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:34.579Z,1520503474.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:34.982Z,1520503474.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:35.382Z,1520503475.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:35.782Z,1520503475.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:36.183Z,1520503476.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:36.582Z,1520503476.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:36.982Z,1520503476.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:37.383Z,1520503477.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:37.779Z,1520503477.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:38.183Z,1520503478.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:38.582Z,1520503478.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:38.982Z,1520503478.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:39.377Z,1520503479.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:39.782Z,1520503479.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:40.180Z,1520503480.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:40.576Z,1520503480.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:40.982Z,1520503480.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:41.382Z,1520503481.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:41.778Z,1520503481.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:42.184Z,1520503482.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:42.582Z,1520503482.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:42.982Z,1520503482.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:43.382Z,1520503483.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:43.780Z,1520503483.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:44.179Z,1520503484.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:44.582Z,1520503484.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:44.982Z,1520503484.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:45.377Z,1520503485.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:45.784Z,1520503485.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:46.194Z,1520503486.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:46.575Z,1520503486.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:46.983Z,1520503486.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:47.346Z,1520503487.346 [NAL9602](INFO): Powering up NAL9602
2018-03-08T10:04:47.394Z,1520503487.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:47.782Z,1520503487.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:48.186Z,1520503488.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:48.585Z,1520503488.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:48.985Z,1520503488.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:49.383Z,1520503489.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:49.787Z,1520503489.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:50.175Z,1520503490.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:50.588Z,1520503490.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:50.988Z,1520503490.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:51.376Z,1520503491.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:51.786Z,1520503491.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:52.186Z,1520503492.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:52.578Z,1520503492.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:52.985Z,1520503492.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:53.385Z,1520503493.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:53.785Z,1520503493.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:54.184Z,1520503494.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:54.586Z,1520503494.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:54.984Z,1520503494.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:55.385Z,1520503495.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:55.786Z,1520503495.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:56.184Z,1520503496.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:56.584Z,1520503496.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:56.982Z,1520503496.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:57.385Z,1520503497.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:57.787Z,1520503497.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:58.189Z,1520503498.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:58.546Z,1520503498.546 [NAL9602](INFO): NAL9602 initialized
2018-03-08T10:04:58.592Z,1520503498.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:58.988Z,1520503498.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:59.388Z,1520503499.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:04:59.794Z,1520503499.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:00.178Z,1520503500.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:00.587Z,1520503500.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:00.983Z,1520503500.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:01.389Z,1520503501.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:01.788Z,1520503501.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:02.189Z,1520503502.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:02.581Z,1520503502.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:02.987Z,1520503502.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:03.386Z,1520503503.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:03.787Z,1520503503.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:04.195Z,1520503504.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:04.218Z,1520503504.218 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T10:05:04.218Z,1520503504.218 [Default:CheckIn:C.Wait] Stopped
2018-03-08T10:05:04.218Z,1520503504.218 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T10:05:04.218Z,1520503504.218 [Default:CheckIn:D] Running Loop=1
2018-03-08T10:05:04.594Z,1520503504.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:04.619Z,1520503504.619 [Default:CheckIn:D] Stopped
2018-03-08T10:05:04.619Z,1520503504.619 [Default:CheckIn:E] Running Loop=1
2018-03-08T10:05:04.989Z,1520503504.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:04.992Z,1520503504.992 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 139.330225 min 
2018-03-08T10:05:04.992Z,1520503504.992 [Default:CheckIn:E] Stopped
2018-03-08T10:05:04.993Z,1520503504.993 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T10:05:04.993Z,1520503504.993 [Default:CheckIn] Stopped
2018-03-08T10:05:04.993Z,1520503504.993 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T10:05:04.993Z,1520503504.993 [Default:CheckIn](INFO): Running loop #14
2018-03-08T10:05:04.993Z,1520503504.993 [Default:CheckIn] Running Loop=14
2018-03-08T10:05:04.993Z,1520503504.993 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T10:05:04.993Z,1520503504.993 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T10:05:05.384Z,1520503505.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:05.784Z,1520503505.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:08.893Z,1520503508.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:09.043Z,1520503509.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:09.391Z,1520503509.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:09.786Z,1520503509.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:10.198Z,1520503510.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:10.597Z,1520503510.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:10.986Z,1520503510.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:11.391Z,1520503511.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:11.798Z,1520503511.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:12.192Z,1520503512.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:12.587Z,1520503512.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:12.990Z,1520503512.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:13.386Z,1520503513.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:13.786Z,1520503513.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:14.192Z,1520503514.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:14.592Z,1520503514.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:14.998Z,1520503514.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:15.386Z,1520503515.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:15.786Z,1520503515.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:16.191Z,1520503516.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:16.599Z,1520503516.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:16.999Z,1520503516.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:17.383Z,1520503517.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:17.790Z,1520503517.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:18.192Z,1520503518.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:18.598Z,1520503518.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:18.991Z,1520503518.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:19.387Z,1520503519.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:19.787Z,1520503519.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:20.192Z,1520503520.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:20.598Z,1520503520.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:20.991Z,1520503520.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:21.382Z,1520503521.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:21.786Z,1520503521.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:22.191Z,1520503522.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:22.598Z,1520503522.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:22.998Z,1520503522.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:23.385Z,1520503523.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:23.781Z,1520503523.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:24.203Z,1520503524.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:24.599Z,1520503524.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:24.991Z,1520503524.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:25.387Z,1520503525.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:25.787Z,1520503525.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:26.191Z,1520503526.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:26.591Z,1520503526.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:26.998Z,1520503526.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:27.389Z,1520503527.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:27.786Z,1520503527.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:28.198Z,1520503528.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:28.598Z,1520503528.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:28.992Z,1520503528.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:29.387Z,1520503529.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:29.789Z,1520503529.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:30.222Z,1520503530.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:30.598Z,1520503530.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:30.998Z,1520503530.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:31.387Z,1520503531.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:31.787Z,1520503531.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:32.193Z,1520503532.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:32.592Z,1520503532.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:32.998Z,1520503532.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:33.387Z,1520503533.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:33.787Z,1520503533.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:34.195Z,1520503534.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:34.599Z,1520503534.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:34.992Z,1520503534.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:35.387Z,1520503535.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:35.781Z,1520503535.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:36.198Z,1520503536.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:36.591Z,1520503536.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:36.998Z,1520503536.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:37.387Z,1520503537.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:37.786Z,1520503537.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:38.198Z,1520503538.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:38.593Z,1520503538.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:38.998Z,1520503538.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:39.387Z,1520503539.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:39.784Z,1520503539.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:40.193Z,1520503540.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:40.597Z,1520503540.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:40.994Z,1520503540.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:41.388Z,1520503541.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:41.790Z,1520503541.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:42.193Z,1520503542.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:42.599Z,1520503542.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:42.998Z,1520503542.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:43.388Z,1520503543.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:43.787Z,1520503543.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:44.193Z,1520503544.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:44.593Z,1520503544.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:44.990Z,1520503544.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:45.385Z,1520503545.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:45.783Z,1520503545.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:46.197Z,1520503546.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:46.607Z,1520503546.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:46.997Z,1520503546.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:47.387Z,1520503547.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:47.789Z,1520503547.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:48.197Z,1520503548.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:48.604Z,1520503548.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:48.999Z,1520503548.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:49.389Z,1520503549.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:49.794Z,1520503549.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:50.198Z,1520503550.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:50.603Z,1520503550.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:50.992Z,1520503550.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:51.388Z,1520503551.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:51.788Z,1520503551.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:52.189Z,1520503552.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:52.596Z,1520503552.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:52.996Z,1520503552.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:53.389Z,1520503553.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:53.787Z,1520503553.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:54.193Z,1520503554.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:54.594Z,1520503554.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:54.998Z,1520503554.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:55.390Z,1520503555.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:55.795Z,1520503555.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:56.198Z,1520503556.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:56.601Z,1520503556.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:56.991Z,1520503556.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:57.391Z,1520503557.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:57.788Z,1520503557.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:58.197Z,1520503558.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:58.604Z,1520503558.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:58.997Z,1520503558.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:59.388Z,1520503559.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:05:59.789Z,1520503559.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:00.197Z,1520503560.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:00.598Z,1520503560.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:01.002Z,1520503561.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:01.389Z,1520503561.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:01.787Z,1520503561.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:02.194Z,1520503562.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:02.600Z,1520503562.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:02.997Z,1520503562.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:03.387Z,1520503563.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:03.790Z,1520503563.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:04.198Z,1520503564.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:04.600Z,1520503564.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:04.998Z,1520503564.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:05.388Z,1520503565.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:05.789Z,1520503565.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:06.197Z,1520503566.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:09.302Z,1520503569.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:09.446Z,1520503569.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:09.768Z,1520503569.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:10.166Z,1520503570.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:10.603Z,1520503570.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:10.967Z,1520503570.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:11.398Z,1520503571.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:11.796Z,1520503571.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:12.197Z,1520503572.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:12.573Z,1520503572.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:12.966Z,1520503572.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:13.370Z,1520503573.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:13.772Z,1520503573.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:14.194Z,1520503574.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:14.591Z,1520503574.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:14.994Z,1520503574.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:15.369Z,1520503575.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:15.772Z,1520503575.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:16.193Z,1520503576.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:16.594Z,1520503576.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:16.990Z,1520503576.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:17.371Z,1520503577.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:17.768Z,1520503577.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:18.192Z,1520503578.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:18.603Z,1520503578.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:18.969Z,1520503578.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:19.373Z,1520503579.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:19.772Z,1520503579.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:20.169Z,1520503580.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:20.606Z,1520503580.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:20.986Z,1520503580.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:21.369Z,1520503581.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:21.773Z,1520503581.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:22.180Z,1520503582.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:22.580Z,1520503582.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:22.980Z,1520503582.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:23.375Z,1520503583.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:23.778Z,1520503583.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:24.181Z,1520503584.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:24.578Z,1520503584.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:24.980Z,1520503584.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:25.375Z,1520503585.375 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:25.375Z,1520503585.375 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48
2018-03-08T10:06:25.375Z,1520503585.375 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T10:06:25.377Z,1520503585.377 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:25.377Z,1520503585.377 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48
2018-03-08T10:06:25.377Z,1520503585.377 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T10:06:25.379Z,1520503585.379 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:25.379Z,1520503585.379 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 48
2018-03-08T10:06:25.379Z,1520503585.379 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T10:06:25.391Z,1520503585.391 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T10:06:25.391Z,1520503585.391 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T10:06:25.391Z,1520503585.391 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T10:06:25.784Z,1520503585.784 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T10:06:25.784Z,1520503585.784 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48
2018-03-08T10:06:25.785Z,1520503585.785 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T10:06:25.785Z,1520503585.785 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48
2018-03-08T10:06:25.785Z,1520503585.785 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T10:06:25.785Z,1520503585.785 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 48
2018-03-08T10:06:26.186Z,1520503586.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T10:06:26.187Z,1520503586.187 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:06:26.187Z,1520503586.187 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:06:26.188Z,1520503586.188 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T10:06:26.188Z,1520503586.188 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:06:26.189Z,1520503586.189 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:06:26.189Z,1520503586.189 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T10:06:26.189Z,1520503586.189 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:06:26.190Z,1520503586.190 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:06:26.583Z,1520503586.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T10:06:26.584Z,1520503586.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:26.990Z,1520503586.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T10:06:26.990Z,1520503586.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:27.374Z,1520503587.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T10:06:27.375Z,1520503587.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:27.781Z,1520503587.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T10:06:27.781Z,1520503587.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:28.188Z,1520503588.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T10:06:28.189Z,1520503588.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:28.576Z,1520503588.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T10:06:28.581Z,1520503588.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:28.994Z,1520503588.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T10:06:28.995Z,1520503588.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:29.362Z,1520503589.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T10:06:29.363Z,1520503589.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:29.786Z,1520503589.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T10:06:29.787Z,1520503589.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:30.189Z,1520503590.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T10:06:30.190Z,1520503590.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:30.588Z,1520503590.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T10:06:30.589Z,1520503590.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:30.969Z,1520503590.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T10:06:30.970Z,1520503590.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:31.366Z,1520503591.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T10:06:31.367Z,1520503591.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:31.765Z,1520503591.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T10:06:31.766Z,1520503591.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:32.176Z,1520503592.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T10:06:32.193Z,1520503592.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:32.598Z,1520503592.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T10:06:32.599Z,1520503592.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:32.999Z,1520503592.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T10:06:32.000Z,1520503593.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:33.374Z,1520503593.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T10:06:33.375Z,1520503593.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:33.767Z,1520503593.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T10:06:33.768Z,1520503593.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:34.180Z,1520503594.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T10:06:34.193Z,1520503594.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:34.582Z,1520503594.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T10:06:34.583Z,1520503594.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:34.980Z,1520503594.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T10:06:34.981Z,1520503594.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:35.375Z,1520503595.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T10:06:35.376Z,1520503595.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:35.786Z,1520503595.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T10:06:35.787Z,1520503595.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:36.214Z,1520503596.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T10:06:36.214Z,1520503596.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:36.590Z,1520503596.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T10:06:36.591Z,1520503596.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:36.982Z,1520503596.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T10:06:36.983Z,1520503596.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:37.372Z,1520503597.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T10:06:37.381Z,1520503597.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:37.818Z,1520503597.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T10:06:37.819Z,1520503597.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:38.195Z,1520503598.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T10:06:38.196Z,1520503598.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:38.588Z,1520503598.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T10:06:38.589Z,1520503598.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:38.990Z,1520503598.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T10:06:38.991Z,1520503598.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:39.381Z,1520503599.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T10:06:39.382Z,1520503599.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:39.774Z,1520503599.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T10:06:39.774Z,1520503599.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:40.184Z,1520503600.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T10:06:40.185Z,1520503600.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:40.589Z,1520503600.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T10:06:40.590Z,1520503600.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:40.982Z,1520503600.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T10:06:40.983Z,1520503600.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:41.362Z,1520503601.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T10:06:41.363Z,1520503601.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:41.766Z,1520503601.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T10:06:41.767Z,1520503601.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:42.189Z,1520503602.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T10:06:42.190Z,1520503602.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:42.587Z,1520503602.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T10:06:42.588Z,1520503602.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:42.968Z,1520503602.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T10:06:42.969Z,1520503602.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:43.367Z,1520503603.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T10:06:43.367Z,1520503603.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:43.765Z,1520503603.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T10:06:43.766Z,1520503603.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:44.192Z,1520503604.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T10:06:44.193Z,1520503604.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:44.595Z,1520503604.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T10:06:44.596Z,1520503604.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:44.990Z,1520503604.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T10:06:44.991Z,1520503604.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:45.370Z,1520503605.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T10:06:45.371Z,1520503605.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:45.770Z,1520503605.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:46.197Z,1520503606.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:46.573Z,1520503606.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:46.993Z,1520503606.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:47.368Z,1520503607.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:47.772Z,1520503607.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:48.194Z,1520503608.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:48.572Z,1520503608.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:48.993Z,1520503608.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:49.383Z,1520503609.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:49.767Z,1520503609.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:50.174Z,1520503610.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:50.599Z,1520503610.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:50.992Z,1520503610.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:51.369Z,1520503611.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:51.794Z,1520503611.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:52.207Z,1520503612.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:52.572Z,1520503612.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:52.980Z,1520503612.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:53.372Z,1520503613.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:53.773Z,1520503613.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:54.201Z,1520503614.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:54.579Z,1520503614.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:54.982Z,1520503614.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:55.371Z,1520503615.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:55.775Z,1520503615.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:56.176Z,1520503616.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:56.580Z,1520503616.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:56.986Z,1520503616.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:57.377Z,1520503617.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:57.775Z,1520503617.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:58.188Z,1520503618.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:58.587Z,1520503618.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:58.981Z,1520503618.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:59.376Z,1520503619.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:06:59.770Z,1520503619.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:00.181Z,1520503620.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:00.579Z,1520503620.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:00.980Z,1520503620.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:01.371Z,1520503621.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:01.803Z,1520503621.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:02.179Z,1520503622.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:02.580Z,1520503622.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:02.986Z,1520503622.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:03.372Z,1520503623.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:03.774Z,1520503623.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:04.180Z,1520503624.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:04.591Z,1520503624.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:04.994Z,1520503624.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:05.375Z,1520503625.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:05.774Z,1520503625.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:06.191Z,1520503626.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:06.589Z,1520503626.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:09.684Z,1520503629.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:09.822Z,1520503629.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:10.170Z,1520503630.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:10.548Z,1520503630.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:10.959Z,1520503630.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:11.371Z,1520503631.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:11.782Z,1520503631.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:12.163Z,1520503632.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:12.571Z,1520503632.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:12.962Z,1520503632.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:13.405Z,1520503633.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:13.762Z,1520503633.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:14.179Z,1520503634.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:14.575Z,1520503634.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:14.975Z,1520503634.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:15.351Z,1520503635.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:15.754Z,1520503635.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:16.175Z,1520503636.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:16.570Z,1520503636.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:16.968Z,1520503636.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:17.371Z,1520503637.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:17.753Z,1520503637.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:18.153Z,1520503638.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:18.575Z,1520503638.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:18.975Z,1520503638.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:19.355Z,1520503639.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:19.754Z,1520503639.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:20.182Z,1520503640.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:20.553Z,1520503640.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:20.979Z,1520503640.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:21.354Z,1520503641.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:21.748Z,1520503641.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:22.179Z,1520503642.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:22.579Z,1520503642.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:22.980Z,1520503642.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:23.355Z,1520503643.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:23.756Z,1520503643.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:24.154Z,1520503644.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:24.579Z,1520503644.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:24.973Z,1520503644.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:25.357Z,1520503645.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:25.757Z,1520503645.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:26.185Z,1520503646.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:26.553Z,1520503646.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:26.982Z,1520503646.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:27.351Z,1520503647.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:27.756Z,1520503647.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:28.184Z,1520503648.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:28.564Z,1520503648.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:28.961Z,1520503648.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:29.358Z,1520503649.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:29.749Z,1520503649.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:30.166Z,1520503650.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:30.570Z,1520503650.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:30.963Z,1520503650.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:31.363Z,1520503651.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:31.758Z,1520503651.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:32.161Z,1520503652.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:32.567Z,1520503652.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:32.974Z,1520503652.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:33.357Z,1520503653.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:33.760Z,1520503653.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:34.169Z,1520503654.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:34.568Z,1520503654.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:34.977Z,1520503654.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:35.363Z,1520503655.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:35.756Z,1520503655.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:36.167Z,1520503656.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:36.568Z,1520503656.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:36.969Z,1520503656.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:37.365Z,1520503657.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:37.761Z,1520503657.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:38.170Z,1520503658.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:38.563Z,1520503658.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:38.978Z,1520503658.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:39.359Z,1520503659.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:39.762Z,1520503659.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:40.175Z,1520503660.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:40.571Z,1520503660.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:40.968Z,1520503660.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:41.358Z,1520503661.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:41.761Z,1520503661.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:42.164Z,1520503662.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:42.586Z,1520503662.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:42.974Z,1520503662.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:43.361Z,1520503663.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:43.765Z,1520503663.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:44.169Z,1520503664.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:44.569Z,1520503664.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:44.968Z,1520503664.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:45.363Z,1520503665.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:45.759Z,1520503665.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:46.166Z,1520503666.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:46.573Z,1520503666.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:46.970Z,1520503666.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:47.359Z,1520503667.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:47.767Z,1520503667.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:48.170Z,1520503668.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:48.571Z,1520503668.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:48.966Z,1520503668.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:49.365Z,1520503669.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:49.765Z,1520503669.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:50.175Z,1520503670.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:50.573Z,1520503670.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:50.969Z,1520503670.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:51.367Z,1520503671.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:51.771Z,1520503671.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:52.171Z,1520503672.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:52.574Z,1520503672.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:52.973Z,1520503672.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:53.355Z,1520503673.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:53.772Z,1520503673.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:54.169Z,1520503674.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:54.577Z,1520503674.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:54.978Z,1520503674.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:55.374Z,1520503675.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:55.751Z,1520503675.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:56.175Z,1520503676.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:56.554Z,1520503676.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:56.972Z,1520503676.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:57.353Z,1520503677.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:57.747Z,1520503677.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:58.172Z,1520503678.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:58.580Z,1520503678.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:58.976Z,1520503678.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:59.353Z,1520503679.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:07:59.752Z,1520503679.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:00.173Z,1520503680.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:00.583Z,1520503680.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:00.981Z,1520503680.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:01.356Z,1520503681.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:01.756Z,1520503681.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:02.162Z,1520503682.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:02.557Z,1520503682.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:02.981Z,1520503682.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:03.356Z,1520503683.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:03.756Z,1520503683.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:04.182Z,1520503684.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:04.562Z,1520503684.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:04.985Z,1520503684.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:05.358Z,1520503685.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:05.759Z,1520503685.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:06.164Z,1520503686.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:06.596Z,1520503686.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:06.966Z,1520503686.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:10.058Z,1520503690.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:10.199Z,1520503690.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:10.547Z,1520503690.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:10.946Z,1520503690.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:11.351Z,1520503691.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:11.744Z,1520503691.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:12.147Z,1520503692.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:12.524Z,1520503692.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:12.954Z,1520503692.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:13.350Z,1520503693.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:13.759Z,1520503693.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:14.158Z,1520503694.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:14.555Z,1520503694.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:14.951Z,1520503694.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:15.322Z,1520503695.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:15.731Z,1520503695.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:16.129Z,1520503696.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:16.555Z,1520503696.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:16.948Z,1520503696.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:17.332Z,1520503697.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:17.735Z,1520503697.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:18.129Z,1520503698.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:18.539Z,1520503698.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:18.935Z,1520503698.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:19.337Z,1520503699.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:19.732Z,1520503699.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:20.161Z,1520503700.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:20.535Z,1520503700.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:20.931Z,1520503700.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:21.331Z,1520503701.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:21.730Z,1520503701.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:22.127Z,1520503702.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:22.561Z,1520503702.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:22.936Z,1520503702.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:23.334Z,1520503703.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:23.735Z,1520503703.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:24.130Z,1520503704.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:24.531Z,1520503704.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:24.930Z,1520503704.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:25.366Z,1520503705.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:25.735Z,1520503705.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:26.161Z,1520503706.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:26.529Z,1520503706.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:26.926Z,1520503706.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:27.336Z,1520503707.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:27.734Z,1520503707.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:28.129Z,1520503708.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:28.539Z,1520503708.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:28.940Z,1520503708.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:29.337Z,1520503709.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:29.729Z,1520503709.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:30.130Z,1520503710.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:30.534Z,1520503710.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:30.939Z,1520503710.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:31.337Z,1520503711.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:31.741Z,1520503711.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:32.138Z,1520503712.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:32.534Z,1520503712.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:32.939Z,1520503712.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:33.339Z,1520503713.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:33.734Z,1520503713.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:34.132Z,1520503714.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:34.537Z,1520503714.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:34.939Z,1520503714.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:35.335Z,1520503715.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:35.739Z,1520503715.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:36.135Z,1520503716.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:36.532Z,1520503716.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:36.935Z,1520503716.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:37.341Z,1520503717.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:37.741Z,1520503717.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:38.139Z,1520503718.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:38.535Z,1520503718.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:38.935Z,1520503718.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:39.330Z,1520503719.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:39.745Z,1520503719.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:40.135Z,1520503720.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:40.541Z,1520503720.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:40.946Z,1520503720.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:41.339Z,1520503721.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:41.735Z,1520503721.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:42.139Z,1520503722.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:42.535Z,1520503722.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:42.932Z,1520503722.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:43.341Z,1520503723.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:43.741Z,1520503723.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:44.139Z,1520503724.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:44.536Z,1520503724.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:44.934Z,1520503724.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:45.339Z,1520503725.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:45.736Z,1520503725.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:46.139Z,1520503726.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:46.547Z,1520503726.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:46.941Z,1520503726.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:47.347Z,1520503727.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:47.739Z,1520503727.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:48.132Z,1520503728.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:48.532Z,1520503728.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:48.938Z,1520503728.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:49.351Z,1520503729.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:49.743Z,1520503729.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:50.141Z,1520503730.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:50.547Z,1520503730.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:50.939Z,1520503730.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:51.339Z,1520503731.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:51.734Z,1520503731.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:52.138Z,1520503732.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:52.541Z,1520503732.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:52.947Z,1520503732.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:53.346Z,1520503733.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:53.736Z,1520503733.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:54.130Z,1520503734.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:54.530Z,1520503734.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:54.939Z,1520503734.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:55.341Z,1520503735.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:55.748Z,1520503735.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:56.159Z,1520503736.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:56.537Z,1520503736.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:56.939Z,1520503736.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:57.335Z,1520503737.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:57.739Z,1520503737.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:58.136Z,1520503738.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:58.540Z,1520503738.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:58.941Z,1520503738.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:59.350Z,1520503739.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:08:59.739Z,1520503739.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:00.136Z,1520503740.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:00.536Z,1520503740.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:00.939Z,1520503740.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:01.338Z,1520503741.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:01.748Z,1520503741.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:02.140Z,1520503742.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:02.535Z,1520503742.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:02.939Z,1520503742.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:03.335Z,1520503743.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:03.738Z,1520503743.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:04.139Z,1520503744.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:04.540Z,1520503744.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:04.949Z,1520503744.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:05.350Z,1520503745.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:05.736Z,1520503745.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:06.135Z,1520503746.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:06.536Z,1520503746.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:06.935Z,1520503746.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:07.338Z,1520503747.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:10.450Z,1520503750.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:10.625Z,1520503750.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:10.951Z,1520503750.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:11.348Z,1520503751.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:11.751Z,1520503751.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:12.149Z,1520503752.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:12.557Z,1520503752.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:12.957Z,1520503752.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:13.352Z,1520503753.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:13.749Z,1520503753.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:14.149Z,1520503754.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:14.551Z,1520503754.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:14.949Z,1520503754.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:15.353Z,1520503755.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:15.756Z,1520503755.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:16.153Z,1520503756.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:16.551Z,1520503756.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:16.950Z,1520503756.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:17.355Z,1520503757.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:17.749Z,1520503757.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:18.152Z,1520503758.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:18.553Z,1520503758.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:18.953Z,1520503758.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:19.351Z,1520503759.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:19.750Z,1520503759.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:20.153Z,1520503760.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:20.556Z,1520503760.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:20.956Z,1520503760.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:21.352Z,1520503761.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:21.751Z,1520503761.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:22.156Z,1520503762.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:22.559Z,1520503762.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:22.956Z,1520503762.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:23.351Z,1520503763.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:23.748Z,1520503763.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:24.156Z,1520503764.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:24.560Z,1520503764.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:24.960Z,1520503764.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:25.348Z,1520503765.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:25.750Z,1520503765.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:26.161Z,1520503766.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:26.566Z,1520503766.566 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:26.566Z,1520503766.566 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49
2018-03-08T10:09:26.566Z,1520503766.566 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T10:09:26.568Z,1520503766.568 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:26.568Z,1520503766.568 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49
2018-03-08T10:09:26.568Z,1520503766.568 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T10:09:26.570Z,1520503766.570 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:26.570Z,1520503766.570 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 49
2018-03-08T10:09:26.570Z,1520503766.570 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T10:09:26.625Z,1520503766.625 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T10:09:26.625Z,1520503766.625 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T10:09:26.625Z,1520503766.625 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T10:09:26.969Z,1520503766.969 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T10:09:26.969Z,1520503766.969 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49
2018-03-08T10:09:26.970Z,1520503766.970 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T10:09:26.970Z,1520503766.970 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49
2018-03-08T10:09:26.970Z,1520503766.970 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T10:09:26.971Z,1520503766.971 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 49
2018-03-08T10:09:27.348Z,1520503767.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T10:09:27.348Z,1520503767.348 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:09:27.349Z,1520503767.349 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:09:27.349Z,1520503767.349 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T10:09:27.350Z,1520503767.350 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:09:27.350Z,1520503767.350 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:09:27.350Z,1520503767.350 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T10:09:27.351Z,1520503767.351 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:09:27.351Z,1520503767.351 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:09:27.757Z,1520503767.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T10:09:27.758Z,1520503767.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:28.161Z,1520503768.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T10:09:28.162Z,1520503768.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:28.561Z,1520503768.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T10:09:28.562Z,1520503768.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:28.963Z,1520503768.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T10:09:28.964Z,1520503768.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:29.331Z,1520503769.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T10:09:29.332Z,1520503769.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:29.758Z,1520503769.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T10:09:29.759Z,1520503769.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:30.157Z,1520503770.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T10:09:30.158Z,1520503770.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:30.559Z,1520503770.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T10:09:30.560Z,1520503770.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:30.964Z,1520503770.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T10:09:30.965Z,1520503770.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:31.363Z,1520503771.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T10:09:31.364Z,1520503771.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:31.762Z,1520503771.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T10:09:31.762Z,1520503771.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:32.139Z,1520503772.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T10:09:32.140Z,1520503772.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:32.538Z,1520503772.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T10:09:32.539Z,1520503772.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:32.939Z,1520503772.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T10:09:32.940Z,1520503772.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:33.364Z,1520503773.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T10:09:33.365Z,1520503773.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:33.774Z,1520503773.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T10:09:33.775Z,1520503773.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:34.166Z,1520503774.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T10:09:34.167Z,1520503774.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:34.566Z,1520503774.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T10:09:34.567Z,1520503774.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:34.945Z,1520503774.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T10:09:34.946Z,1520503774.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:35.341Z,1520503775.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T10:09:35.342Z,1520503775.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:35.750Z,1520503775.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T10:09:35.751Z,1520503775.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:36.146Z,1520503776.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T10:09:36.147Z,1520503776.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:36.547Z,1520503776.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T10:09:36.548Z,1520503776.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:36.973Z,1520503776.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T10:09:36.974Z,1520503776.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:37.354Z,1520503777.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T10:09:37.355Z,1520503777.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:37.747Z,1520503777.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T10:09:37.748Z,1520503777.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:38.151Z,1520503778.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T10:09:38.152Z,1520503778.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:38.550Z,1520503778.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T10:09:38.551Z,1520503778.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:38.949Z,1520503778.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T10:09:38.950Z,1520503778.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:39.353Z,1520503779.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T10:09:39.354Z,1520503779.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:39.756Z,1520503779.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T10:09:39.757Z,1520503779.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:40.150Z,1520503780.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T10:09:40.151Z,1520503780.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:40.549Z,1520503780.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T10:09:40.550Z,1520503780.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:40.950Z,1520503780.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T10:09:40.951Z,1520503780.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:41.343Z,1520503781.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T10:09:41.344Z,1520503781.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:41.753Z,1520503781.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T10:09:41.754Z,1520503781.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:42.149Z,1520503782.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T10:09:42.150Z,1520503782.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:42.552Z,1520503782.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T10:09:42.553Z,1520503782.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:42.956Z,1520503782.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T10:09:42.957Z,1520503782.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:43.352Z,1520503783.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T10:09:43.353Z,1520503783.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:43.743Z,1520503783.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T10:09:43.743Z,1520503783.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:44.150Z,1520503784.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T10:09:44.151Z,1520503784.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:44.551Z,1520503784.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T10:09:44.552Z,1520503784.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:44.949Z,1520503784.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T10:09:44.950Z,1520503784.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:45.353Z,1520503785.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T10:09:45.354Z,1520503785.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:45.755Z,1520503785.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T10:09:45.757Z,1520503785.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:46.158Z,1520503786.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T10:09:46.159Z,1520503786.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:46.549Z,1520503786.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T10:09:46.550Z,1520503786.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:46.946Z,1520503786.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:47.346Z,1520503787.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:47.749Z,1520503787.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:48.146Z,1520503788.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:48.553Z,1520503788.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:48.953Z,1520503788.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:49.353Z,1520503789.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:49.749Z,1520503789.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:50.150Z,1520503790.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:50.550Z,1520503790.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:50.950Z,1520503790.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:51.353Z,1520503791.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:51.755Z,1520503791.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:52.163Z,1520503792.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:52.549Z,1520503792.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:52.945Z,1520503792.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:53.349Z,1520503793.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:53.747Z,1520503793.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:54.163Z,1520503794.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:54.554Z,1520503794.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:54.960Z,1520503794.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:55.351Z,1520503795.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:55.754Z,1520503795.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:56.157Z,1520503796.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:56.572Z,1520503796.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:56.963Z,1520503796.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:57.353Z,1520503797.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:57.758Z,1520503797.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:58.153Z,1520503798.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:58.561Z,1520503798.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:58.962Z,1520503798.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:59.343Z,1520503799.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:09:59.753Z,1520503799.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:00.160Z,1520503800.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:00.559Z,1520503800.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:00.968Z,1520503800.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:01.364Z,1520503801.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:01.762Z,1520503801.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:02.166Z,1520503802.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:02.543Z,1520503802.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:02.947Z,1520503802.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:03.372Z,1520503803.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:03.769Z,1520503803.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:04.149Z,1520503804.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:04.543Z,1520503804.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:04.947Z,1520503804.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:05.354Z,1520503805.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:05.361Z,1520503805.361 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T10:05:04.0Z
2018-03-08T10:10:05.361Z,1520503805.361 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T10:10:05.361Z,1520503805.361 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T10:10:05.747Z,1520503805.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:06.234Z,1520503806.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:06.554Z,1520503806.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:09.683Z,1520503809.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:09.823Z,1520503809.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:10.118Z,1520503810.118 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0056.lzma
2018-03-08T10:10:10.160Z,1520503810.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:10.554Z,1520503810.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:10.911Z,1520503810.911 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0056.lzma.bak
2018-03-08T10:10:10.911Z,1520503810.911 [DataOverHttps](INFO): SBD MOMSN=7984738
2018-03-08T10:10:10.963Z,1520503810.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:11.549Z,1520503811.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:11.786Z,1520503811.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:14.888Z,1520503814.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:15.014Z,1520503815.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:15.367Z,1520503815.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:15.759Z,1520503815.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:16.161Z,1520503816.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:16.576Z,1520503816.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:16.972Z,1520503816.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:20.225Z,1520503820.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:20.401Z,1520503820.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:20.673Z,1520503820.673 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180308T074127/Express0057.lzma
2018-03-08T10:10:20.731Z,1520503820.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:21.142Z,1520503821.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:21.475Z,1520503821.475 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0057.lzma.bak
2018-03-08T10:10:21.475Z,1520503821.475 [DataOverHttps](INFO): SBD MOMSN=7984771
2018-03-08T10:10:21.550Z,1520503821.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:22.307Z,1520503822.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:22.342Z,1520503822.342 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T10:10:22.342Z,1520503822.342 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T10:10:22.342Z,1520503822.342 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T10:10:22.492Z,1520503822.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:25.539Z,1520503825.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:25.665Z,1520503825.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:26.037Z,1520503826.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:26.441Z,1520503826.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:26.816Z,1520503826.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:27.220Z,1520503827.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:27.619Z,1520503827.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:28.016Z,1520503828.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:28.446Z,1520503828.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:28.817Z,1520503828.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:29.222Z,1520503829.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:29.613Z,1520503829.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:30.027Z,1520503830.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:30.415Z,1520503830.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:30.816Z,1520503830.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:31.225Z,1520503831.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:31.627Z,1520503831.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:32.022Z,1520503832.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:32.419Z,1520503832.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:32.819Z,1520503832.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:33.231Z,1520503833.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:33.617Z,1520503833.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:34.030Z,1520503834.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:34.454Z,1520503834.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:34.824Z,1520503834.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:35.227Z,1520503835.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:35.617Z,1520503835.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:36.018Z,1520503836.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:36.417Z,1520503836.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:36.812Z,1520503836.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:37.226Z,1520503837.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:37.628Z,1520503837.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:38.021Z,1520503838.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:38.416Z,1520503838.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:38.817Z,1520503838.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:39.222Z,1520503839.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:39.619Z,1520503839.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:40.015Z,1520503840.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:40.426Z,1520503840.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:40.827Z,1520503840.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:41.230Z,1520503841.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:41.615Z,1520503841.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:42.023Z,1520503842.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:42.449Z,1520503842.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:42.813Z,1520503842.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:43.220Z,1520503843.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:43.625Z,1520503843.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:44.024Z,1520503844.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:44.419Z,1520503844.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:44.816Z,1520503844.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:45.215Z,1520503845.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:45.615Z,1520503845.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:46.022Z,1520503846.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:46.424Z,1520503846.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:46.830Z,1520503846.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:47.228Z,1520503847.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:47.616Z,1520503847.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:48.009Z,1520503848.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:48.419Z,1520503848.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:48.823Z,1520503848.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:49.225Z,1520503849.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:49.627Z,1520503849.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:50.030Z,1520503850.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:50.419Z,1520503850.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:50.817Z,1520503850.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:51.215Z,1520503851.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:51.615Z,1520503851.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:52.018Z,1520503852.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:52.503Z,1520503852.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:52.823Z,1520503852.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:53.227Z,1520503853.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:53.626Z,1520503853.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:54.008Z,1520503854.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:54.449Z,1520503854.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:54.822Z,1520503854.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:55.219Z,1520503855.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:55.636Z,1520503855.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:56.020Z,1520503856.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:56.415Z,1520503856.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:56.814Z,1520503856.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:57.213Z,1520503857.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:57.610Z,1520503857.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:58.017Z,1520503858.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:58.441Z,1520503858.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:58.844Z,1520503858.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:59.271Z,1520503859.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:10:59.616Z,1520503859.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:00.015Z,1520503860.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:00.416Z,1520503860.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:00.814Z,1520503860.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:01.244Z,1520503861.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:01.619Z,1520503861.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:02.045Z,1520503862.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:02.410Z,1520503862.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:02.817Z,1520503862.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:03.214Z,1520503863.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:03.615Z,1520503863.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:04.013Z,1520503864.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:04.417Z,1520503864.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:04.814Z,1520503864.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:05.243Z,1520503865.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:05.619Z,1520503865.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:06.015Z,1520503866.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:06.413Z,1520503866.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:06.817Z,1520503866.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:07.220Z,1520503867.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:07.637Z,1520503867.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:08.025Z,1520503868.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:08.419Z,1520503868.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:08.811Z,1520503868.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:09.216Z,1520503869.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:09.622Z,1520503869.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:10.013Z,1520503870.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:10.425Z,1520503870.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:10.826Z,1520503870.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:11.222Z,1520503871.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:11.617Z,1520503871.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:12.009Z,1520503872.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:12.420Z,1520503872.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:12.822Z,1520503872.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:13.222Z,1520503873.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:13.617Z,1520503873.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:14.031Z,1520503874.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:14.420Z,1520503874.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:14.822Z,1520503874.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:15.215Z,1520503875.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:15.616Z,1520503875.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:16.013Z,1520503876.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:16.431Z,1520503876.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:16.819Z,1520503876.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:17.223Z,1520503877.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:17.618Z,1520503877.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:18.017Z,1520503878.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:18.422Z,1520503878.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:18.817Z,1520503878.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:19.227Z,1520503879.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:19.629Z,1520503879.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:20.028Z,1520503880.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:20.423Z,1520503880.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:20.826Z,1520503880.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:21.221Z,1520503881.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:21.619Z,1520503881.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:22.027Z,1520503882.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:22.431Z,1520503882.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:22.828Z,1520503882.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:25.973Z,1520503885.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:26.094Z,1520503886.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:26.450Z,1520503886.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:26.848Z,1520503886.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:27.276Z,1520503887.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:27.676Z,1520503887.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:28.077Z,1520503888.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:28.446Z,1520503888.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:28.855Z,1520503888.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:29.245Z,1520503889.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:29.650Z,1520503889.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:30.045Z,1520503890.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:30.477Z,1520503890.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:30.856Z,1520503890.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:31.278Z,1520503891.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:31.649Z,1520503891.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:32.055Z,1520503892.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:32.451Z,1520503892.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:32.851Z,1520503892.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:33.260Z,1520503893.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:33.664Z,1520503893.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:34.062Z,1520503894.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:34.455Z,1520503894.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:34.854Z,1520503894.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:35.252Z,1520503895.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:35.658Z,1520503895.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:36.053Z,1520503896.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:36.456Z,1520503896.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:36.860Z,1520503896.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:37.256Z,1520503897.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:37.651Z,1520503897.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:38.058Z,1520503898.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:38.458Z,1520503898.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:38.853Z,1520503898.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:39.257Z,1520503899.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:39.661Z,1520503899.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:40.062Z,1520503900.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:40.452Z,1520503900.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:40.858Z,1520503900.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:41.253Z,1520503901.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:41.659Z,1520503901.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:42.054Z,1520503902.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:42.456Z,1520503902.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:42.860Z,1520503902.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:42.898Z,1520503902.898 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T10:11:43.255Z,1520503903.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:43.289Z,1520503903.289 [CBIT](INFO): Clearing failed state for component DropWeight
2018-03-08T10:11:43.289Z,1520503903.289 [DropWeight] No Fault, FailCount= 1
2018-03-08T10:11:43.651Z,1520503903.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:44.053Z,1520503904.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:44.456Z,1520503904.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:44.853Z,1520503904.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:45.257Z,1520503905.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:45.662Z,1520503905.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:46.062Z,1520503906.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:46.454Z,1520503906.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:46.850Z,1520503906.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:47.254Z,1520503907.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:47.653Z,1520503907.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:48.054Z,1520503908.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:48.457Z,1520503908.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:48.860Z,1520503908.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:49.257Z,1520503909.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:49.654Z,1520503909.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:50.049Z,1520503910.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:50.453Z,1520503910.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:50.854Z,1520503910.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:51.257Z,1520503911.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:51.661Z,1520503911.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:52.056Z,1520503912.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:52.454Z,1520503912.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:52.855Z,1520503912.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:53.254Z,1520503913.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:53.659Z,1520503913.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:54.059Z,1520503914.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:54.456Z,1520503914.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:54.860Z,1520503914.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:55.257Z,1520503915.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:55.653Z,1520503915.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:56.048Z,1520503916.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:56.450Z,1520503916.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:56.853Z,1520503916.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:57.255Z,1520503917.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:57.656Z,1520503917.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:58.062Z,1520503918.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:58.453Z,1520503918.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:58.855Z,1520503918.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:59.253Z,1520503919.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:11:59.654Z,1520503919.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:00.050Z,1520503920.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:00.456Z,1520503920.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:00.861Z,1520503920.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:01.256Z,1520503921.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:01.653Z,1520503921.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:02.090Z,1520503922.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:02.466Z,1520503922.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:02.854Z,1520503922.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:03.260Z,1520503923.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:03.667Z,1520503923.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:04.064Z,1520503924.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:04.453Z,1520503924.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:04.857Z,1520503924.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:05.252Z,1520503925.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:05.655Z,1520503925.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:06.057Z,1520503926.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:06.468Z,1520503926.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:06.864Z,1520503926.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:07.264Z,1520503927.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:07.653Z,1520503927.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:08.054Z,1520503928.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:08.460Z,1520503928.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:08.858Z,1520503928.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:09.261Z,1520503929.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:09.670Z,1520503929.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:10.064Z,1520503930.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:10.448Z,1520503930.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:10.857Z,1520503930.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:11.254Z,1520503931.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:11.657Z,1520503931.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:12.062Z,1520503932.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:12.464Z,1520503932.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:12.867Z,1520503932.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:13.265Z,1520503933.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:13.658Z,1520503933.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:14.055Z,1520503934.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:14.454Z,1520503934.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:14.852Z,1520503934.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:15.262Z,1520503935.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:15.664Z,1520503935.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:16.065Z,1520503936.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:16.455Z,1520503936.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:16.863Z,1520503936.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:17.252Z,1520503937.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:17.653Z,1520503937.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:18.059Z,1520503938.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:18.464Z,1520503938.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:18.868Z,1520503938.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:19.265Z,1520503939.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:19.653Z,1520503939.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:20.052Z,1520503940.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:20.462Z,1520503940.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:20.858Z,1520503940.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:21.263Z,1520503941.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:21.668Z,1520503941.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:22.065Z,1520503942.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:22.456Z,1520503942.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:22.861Z,1520503942.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:25.952Z,1520503945.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:26.073Z,1520503946.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:26.451Z,1520503946.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:26.856Z,1520503946.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:27.228Z,1520503947.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:27.631Z,1520503947.631 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:27.632Z,1520503947.632 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50
2018-03-08T10:12:27.632Z,1520503947.632 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T10:12:27.634Z,1520503947.634 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:27.634Z,1520503947.634 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50
2018-03-08T10:12:27.634Z,1520503947.634 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T10:12:27.635Z,1520503947.635 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:27.636Z,1520503947.635 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 50
2018-03-08T10:12:27.636Z,1520503947.636 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T10:12:27.656Z,1520503947.656 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T10:12:27.656Z,1520503947.656 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T10:12:27.656Z,1520503947.656 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T10:12:28.040Z,1520503948.040 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T10:12:28.040Z,1520503948.040 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50
2018-03-08T10:12:28.041Z,1520503948.041 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T10:12:28.041Z,1520503948.041 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50
2018-03-08T10:12:28.041Z,1520503948.041 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T10:12:28.041Z,1520503948.041 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 50
2018-03-08T10:12:28.437Z,1520503948.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T10:12:28.438Z,1520503948.438 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:12:28.438Z,1520503948.438 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:12:28.439Z,1520503948.439 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T10:12:28.439Z,1520503948.439 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:12:28.439Z,1520503948.439 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:12:28.440Z,1520503948.440 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T10:12:28.440Z,1520503948.440 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:12:28.441Z,1520503948.441 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:12:28.830Z,1520503948.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T10:12:28.831Z,1520503948.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:29.240Z,1520503949.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T10:12:29.241Z,1520503949.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:29.636Z,1520503949.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T10:12:29.638Z,1520503949.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:30.037Z,1520503950.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T10:12:30.038Z,1520503950.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:30.426Z,1520503950.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T10:12:30.427Z,1520503950.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:30.824Z,1520503950.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T10:12:30.826Z,1520503950.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:31.233Z,1520503951.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T10:12:31.234Z,1520503951.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:31.625Z,1520503951.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T10:12:31.626Z,1520503951.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:32.023Z,1520503952.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T10:12:32.024Z,1520503952.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:32.437Z,1520503952.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T10:12:32.438Z,1520503952.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:32.836Z,1520503952.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T10:12:32.837Z,1520503952.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:33.294Z,1520503953.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T10:12:33.295Z,1520503953.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:33.627Z,1520503953.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T10:12:33.628Z,1520503953.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:34.029Z,1520503954.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T10:12:34.030Z,1520503954.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:34.426Z,1520503954.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T10:12:34.427Z,1520503954.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:34.826Z,1520503954.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T10:12:34.827Z,1520503954.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:35.242Z,1520503955.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T10:12:35.243Z,1520503955.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:35.632Z,1520503955.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T10:12:35.633Z,1520503955.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:36.033Z,1520503956.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T10:12:36.033Z,1520503956.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:36.430Z,1520503956.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T10:12:36.431Z,1520503956.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:36.828Z,1520503956.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T10:12:36.829Z,1520503956.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:37.228Z,1520503957.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T10:12:37.229Z,1520503957.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:37.628Z,1520503957.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T10:12:37.629Z,1520503957.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:38.034Z,1520503958.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T10:12:38.035Z,1520503958.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:38.442Z,1520503958.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T10:12:38.443Z,1520503958.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:38.839Z,1520503958.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T10:12:38.840Z,1520503958.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:39.233Z,1520503959.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T10:12:39.234Z,1520503959.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:39.633Z,1520503959.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T10:12:39.633Z,1520503959.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:40.026Z,1520503960.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T10:12:40.027Z,1520503960.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:40.425Z,1520503960.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T10:12:40.426Z,1520503960.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:40.830Z,1520503960.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T10:12:40.831Z,1520503960.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:41.232Z,1520503961.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T10:12:41.233Z,1520503961.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:41.624Z,1520503961.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T10:12:41.625Z,1520503961.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:42.031Z,1520503962.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T10:12:42.032Z,1520503962.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:42.503Z,1520503962.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T10:12:42.506Z,1520503962.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:42.818Z,1520503962.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T10:12:42.819Z,1520503962.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:43.222Z,1520503963.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T10:12:43.223Z,1520503963.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:43.621Z,1520503963.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T10:12:43.622Z,1520503963.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:44.020Z,1520503964.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T10:12:44.021Z,1520503964.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:44.436Z,1520503964.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T10:12:44.445Z,1520503964.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:44.835Z,1520503964.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T10:12:44.836Z,1520503964.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:45.242Z,1520503965.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T10:12:45.243Z,1520503965.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:45.625Z,1520503965.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T10:12:45.626Z,1520503965.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:46.017Z,1520503966.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T10:12:46.018Z,1520503966.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:46.428Z,1520503966.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T10:12:46.437Z,1520503966.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:46.827Z,1520503966.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T10:12:46.828Z,1520503966.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:47.257Z,1520503967.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T10:12:47.258Z,1520503967.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:47.635Z,1520503967.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:48.027Z,1520503968.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:48.429Z,1520503968.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:48.823Z,1520503968.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:49.226Z,1520503969.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:49.628Z,1520503969.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:50.022Z,1520503970.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:50.431Z,1520503970.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:50.828Z,1520503970.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:51.234Z,1520503971.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:51.630Z,1520503971.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:52.027Z,1520503972.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:52.430Z,1520503972.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:52.834Z,1520503972.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:53.240Z,1520503973.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:53.641Z,1520503973.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:54.039Z,1520503974.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:54.428Z,1520503974.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:54.827Z,1520503974.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:55.227Z,1520503975.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:55.627Z,1520503975.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:56.030Z,1520503976.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:56.439Z,1520503976.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:56.841Z,1520503976.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:57.239Z,1520503977.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:57.627Z,1520503977.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:58.038Z,1520503978.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:58.429Z,1520503978.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:58.827Z,1520503978.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:59.246Z,1520503979.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:12:59.643Z,1520503979.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:00.043Z,1520503980.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:00.435Z,1520503980.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:00.830Z,1520503980.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:01.236Z,1520503981.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:01.632Z,1520503981.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:02.029Z,1520503982.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:02.441Z,1520503982.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:02.840Z,1520503982.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:03.243Z,1520503983.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:03.631Z,1520503983.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:04.038Z,1520503984.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:04.429Z,1520503984.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:04.835Z,1520503984.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:05.238Z,1520503985.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:05.639Z,1520503985.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:06.046Z,1520503986.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:06.438Z,1520503986.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:06.833Z,1520503986.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:07.233Z,1520503987.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:07.631Z,1520503987.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:08.034Z,1520503988.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:08.441Z,1520503988.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:08.846Z,1520503988.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:09.243Z,1520503989.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:09.632Z,1520503989.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:10.040Z,1520503990.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:10.435Z,1520503990.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:10.841Z,1520503990.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:11.245Z,1520503991.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:11.647Z,1520503991.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:12.041Z,1520503992.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:12.421Z,1520503992.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:12.843Z,1520503992.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:13.241Z,1520503993.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:13.626Z,1520503993.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:14.019Z,1520503994.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:14.444Z,1520503994.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:14.828Z,1520503994.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:15.247Z,1520503995.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:15.623Z,1520503995.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:16.027Z,1520503996.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:16.423Z,1520503996.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:16.823Z,1520503996.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:17.246Z,1520503997.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:17.645Z,1520503997.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:18.043Z,1520503998.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:18.421Z,1520503998.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:18.826Z,1520503998.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:19.227Z,1520503999.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:19.623Z,1520503999.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:20.018Z,1520504000.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:20.451Z,1520504000.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:20.848Z,1520504000.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:21.248Z,1520504001.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:21.631Z,1520504001.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:22.025Z,1520504002.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:22.429Z,1520504002.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:22.824Z,1520504002.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:23.236Z,1520504003.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:26.333Z,1520504006.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:26.470Z,1520504006.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:26.835Z,1520504006.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:27.233Z,1520504007.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:27.635Z,1520504007.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:28.027Z,1520504008.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:28.458Z,1520504008.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:28.840Z,1520504008.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:29.259Z,1520504009.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:29.630Z,1520504009.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:30.042Z,1520504010.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:30.436Z,1520504010.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:30.833Z,1520504010.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:31.236Z,1520504011.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:31.640Z,1520504011.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:32.040Z,1520504012.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:32.433Z,1520504012.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:32.833Z,1520504012.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:33.238Z,1520504013.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:33.643Z,1520504013.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:34.036Z,1520504014.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:34.440Z,1520504014.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:34.843Z,1520504014.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:35.246Z,1520504015.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:35.639Z,1520504015.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:36.032Z,1520504016.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:36.443Z,1520504016.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:36.842Z,1520504016.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:37.241Z,1520504017.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:37.639Z,1520504017.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:38.050Z,1520504018.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:38.437Z,1520504018.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:38.836Z,1520504018.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:39.239Z,1520504019.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:39.636Z,1520504019.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:40.037Z,1520504020.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:40.446Z,1520504020.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:40.842Z,1520504020.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:41.245Z,1520504021.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:41.637Z,1520504021.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:42.034Z,1520504022.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:42.432Z,1520504022.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:42.838Z,1520504022.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:43.244Z,1520504023.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:43.644Z,1520504023.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:44.043Z,1520504024.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:44.433Z,1520504024.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:44.831Z,1520504024.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:45.232Z,1520504025.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:45.633Z,1520504025.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:46.036Z,1520504026.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:46.440Z,1520504026.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:46.844Z,1520504026.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:47.277Z,1520504027.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:47.639Z,1520504027.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:48.037Z,1520504028.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:48.434Z,1520504028.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:48.839Z,1520504028.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:49.242Z,1520504029.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:49.647Z,1520504029.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:50.044Z,1520504030.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:50.446Z,1520504030.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:50.837Z,1520504030.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:51.234Z,1520504031.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:51.639Z,1520504031.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:52.040Z,1520504032.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:52.451Z,1520504032.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:52.854Z,1520504032.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:53.244Z,1520504033.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:53.629Z,1520504033.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:54.039Z,1520504034.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:54.440Z,1520504034.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:54.842Z,1520504034.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:55.245Z,1520504035.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:55.655Z,1520504035.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:56.045Z,1520504036.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:56.446Z,1520504036.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:56.838Z,1520504036.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:57.235Z,1520504037.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:57.639Z,1520504037.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:58.055Z,1520504038.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:58.446Z,1520504038.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:58.845Z,1520504038.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:59.253Z,1520504039.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:13:59.644Z,1520504039.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:00.055Z,1520504040.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:00.482Z,1520504040.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:00.835Z,1520504040.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:01.255Z,1520504041.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:01.651Z,1520504041.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:02.040Z,1520504042.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:02.439Z,1520504042.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:02.830Z,1520504042.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:03.235Z,1520504043.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:03.643Z,1520504043.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:04.037Z,1520504044.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:04.435Z,1520504044.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:04.840Z,1520504044.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:05.241Z,1520504045.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:05.627Z,1520504045.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:06.035Z,1520504046.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:06.434Z,1520504046.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:06.839Z,1520504046.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:07.267Z,1520504047.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:07.640Z,1520504047.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:08.039Z,1520504048.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:08.439Z,1520504048.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:08.836Z,1520504048.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:09.230Z,1520504049.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:09.635Z,1520504049.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:10.031Z,1520504050.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:10.441Z,1520504050.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:10.840Z,1520504050.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:11.242Z,1520504051.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:11.639Z,1520504051.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:12.036Z,1520504052.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:12.432Z,1520504052.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:12.831Z,1520504052.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:13.245Z,1520504053.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:13.649Z,1520504053.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:14.050Z,1520504054.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:14.443Z,1520504054.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:14.840Z,1520504054.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:15.237Z,1520504055.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:15.639Z,1520504055.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:16.037Z,1520504056.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:16.454Z,1520504056.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:16.845Z,1520504056.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:17.244Z,1520504057.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:17.637Z,1520504057.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:18.036Z,1520504058.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:18.447Z,1520504058.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:18.836Z,1520504058.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:19.251Z,1520504059.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:19.646Z,1520504059.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:20.054Z,1520504060.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:20.435Z,1520504060.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:20.842Z,1520504060.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:21.229Z,1520504061.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:21.643Z,1520504061.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:22.038Z,1520504062.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:22.453Z,1520504062.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:22.854Z,1520504062.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:23.252Z,1520504063.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:26.324Z,1520504066.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:26.453Z,1520504066.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:26.852Z,1520504066.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:27.243Z,1520504067.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:27.655Z,1520504067.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:28.027Z,1520504068.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:28.431Z,1520504068.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:28.823Z,1520504068.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:29.257Z,1520504069.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:29.627Z,1520504069.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:30.054Z,1520504070.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:30.425Z,1520504070.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:30.835Z,1520504070.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:31.231Z,1520504071.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:31.627Z,1520504071.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:32.030Z,1520504072.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:32.454Z,1520504072.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:32.832Z,1520504072.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:33.232Z,1520504073.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:33.627Z,1520504073.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:34.029Z,1520504074.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:34.436Z,1520504074.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:34.827Z,1520504074.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:35.257Z,1520504075.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:35.635Z,1520504075.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:36.051Z,1520504076.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:36.427Z,1520504076.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:36.827Z,1520504076.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:37.235Z,1520504077.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:37.633Z,1520504077.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:38.031Z,1520504078.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:38.454Z,1520504078.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:38.834Z,1520504078.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:39.242Z,1520504079.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:39.627Z,1520504079.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:40.026Z,1520504080.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:40.430Z,1520504080.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:40.855Z,1520504080.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:41.232Z,1520504081.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:41.628Z,1520504081.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:42.031Z,1520504082.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:42.431Z,1520504082.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:42.834Z,1520504082.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:43.227Z,1520504083.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:43.658Z,1520504083.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:44.045Z,1520504084.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:44.454Z,1520504084.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:44.855Z,1520504084.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:45.235Z,1520504085.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:45.655Z,1520504085.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:46.027Z,1520504086.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:46.428Z,1520504086.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:46.835Z,1520504086.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:47.260Z,1520504087.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:47.628Z,1520504087.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:48.040Z,1520504088.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:48.439Z,1520504088.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:48.834Z,1520504088.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:49.230Z,1520504089.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:49.632Z,1520504089.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:50.036Z,1520504090.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:50.437Z,1520504090.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:50.837Z,1520504090.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:51.243Z,1520504091.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:51.638Z,1520504091.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:52.036Z,1520504092.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:52.432Z,1520504092.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:52.834Z,1520504092.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:53.247Z,1520504093.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:53.640Z,1520504093.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:54.043Z,1520504094.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:54.431Z,1520504094.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:54.837Z,1520504094.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:55.243Z,1520504095.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:55.636Z,1520504095.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:56.029Z,1520504096.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:56.447Z,1520504096.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:56.854Z,1520504096.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:57.250Z,1520504097.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:57.632Z,1520504097.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:58.035Z,1520504098.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:58.437Z,1520504098.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:58.838Z,1520504098.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:59.243Z,1520504099.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:59.586Z,1520504099.586 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T10:14:59.586Z,1520504099.586 [NAL9602] Data Fault, FailCount= 5
2018-03-08T10:14:59.586Z,1520504099.586 [NAL9602](ERROR): Data Fault
2018-03-08T10:14:59.643Z,1520504099.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:14:59.664Z,1520504099.664 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T10:14:59.664Z,1520504099.664 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-08T10:14:59.986Z,1520504099.986 [NAL9602](INFO): Powering down
2018-03-08T10:15:00.049Z,1520504100.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:00.061Z,1520504100.061 [CBIT](INFO): Critical error at 20180308T101459
2018-03-08T10:15:00.419Z,1520504100.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:00.822Z,1520504100.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:01.226Z,1520504101.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:01.616Z,1520504101.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:02.029Z,1520504102.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:02.421Z,1520504102.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:02.824Z,1520504102.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:03.225Z,1520504103.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:03.624Z,1520504103.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:04.025Z,1520504104.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:04.425Z,1520504104.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:04.829Z,1520504104.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:05.223Z,1520504105.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:05.625Z,1520504105.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:06.028Z,1520504106.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:06.426Z,1520504106.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:06.826Z,1520504106.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:07.252Z,1520504107.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:07.622Z,1520504107.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:08.030Z,1520504108.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:08.426Z,1520504108.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:08.821Z,1520504108.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:09.229Z,1520504109.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:09.625Z,1520504109.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:10.023Z,1520504110.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:10.423Z,1520504110.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:10.828Z,1520504110.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:11.226Z,1520504111.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:11.629Z,1520504111.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:12.025Z,1520504112.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:12.424Z,1520504112.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:12.831Z,1520504112.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:13.226Z,1520504113.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:13.620Z,1520504113.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:14.029Z,1520504114.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:14.430Z,1520504114.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:14.825Z,1520504114.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:15.225Z,1520504115.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:15.640Z,1520504115.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:16.022Z,1520504116.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:16.426Z,1520504116.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:16.825Z,1520504116.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:17.226Z,1520504117.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:17.629Z,1520504117.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:18.025Z,1520504118.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:18.425Z,1520504118.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:18.829Z,1520504118.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:19.230Z,1520504119.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:19.621Z,1520504119.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:20.031Z,1520504120.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:20.428Z,1520504120.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:20.830Z,1520504120.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:21.239Z,1520504121.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:21.634Z,1520504121.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:22.033Z,1520504122.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:22.430Z,1520504122.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:22.828Z,1520504122.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:22.831Z,1520504122.831 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T10:15:22.831Z,1520504122.831 [Default:CheckIn:C.Wait] Stopped
2018-03-08T10:15:22.831Z,1520504122.831 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T10:15:22.831Z,1520504122.831 [Default:CheckIn:D] Running Loop=1
2018-03-08T10:15:23.222Z,1520504123.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:23.225Z,1520504123.225 [Default:CheckIn:D] Stopped
2018-03-08T10:15:23.225Z,1520504123.225 [Default:CheckIn:E] Running Loop=1
2018-03-08T10:15:23.630Z,1520504123.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:23.633Z,1520504123.633 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 149.640332 min 
2018-03-08T10:15:23.633Z,1520504123.633 [Default:CheckIn:E] Stopped
2018-03-08T10:15:23.633Z,1520504123.633 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T10:15:23.633Z,1520504123.633 [Default:CheckIn] Stopped
2018-03-08T10:15:23.634Z,1520504123.634 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T10:15:23.634Z,1520504123.634 [Default:CheckIn](INFO): Running loop #15
2018-03-08T10:15:23.634Z,1520504123.634 [Default:CheckIn] Running Loop=15
2018-03-08T10:15:23.634Z,1520504123.634 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T10:15:23.634Z,1520504123.634 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T10:15:26.726Z,1520504126.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:26.838Z,1520504126.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:27.218Z,1520504127.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:27.612Z,1520504127.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:28.018Z,1520504128.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:28.415Z,1520504128.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:28.818Z,1520504128.818 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:28.818Z,1520504128.818 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51
2018-03-08T10:15:28.818Z,1520504128.818 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T10:15:28.820Z,1520504128.820 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:28.820Z,1520504128.820 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51
2018-03-08T10:15:28.820Z,1520504128.820 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T10:15:28.822Z,1520504128.822 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:28.822Z,1520504128.822 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 51
2018-03-08T10:15:28.822Z,1520504128.822 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T10:15:28.833Z,1520504128.833 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T10:15:28.834Z,1520504128.834 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T10:15:28.834Z,1520504128.834 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T10:15:29.217Z,1520504129.217 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T10:15:29.217Z,1520504129.217 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51
2018-03-08T10:15:29.217Z,1520504129.217 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T10:15:29.218Z,1520504129.218 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51
2018-03-08T10:15:29.218Z,1520504129.218 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T10:15:29.218Z,1520504129.218 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 51
2018-03-08T10:15:29.604Z,1520504129.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T10:15:29.604Z,1520504129.604 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:15:29.609Z,1520504129.609 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:15:29.609Z,1520504129.609 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T10:15:29.609Z,1520504129.609 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:15:29.610Z,1520504129.610 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:15:29.610Z,1520504129.610 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T10:15:29.610Z,1520504129.610 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:15:29.611Z,1520504129.611 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:15:30.021Z,1520504130.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T10:15:30.022Z,1520504130.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:30.404Z,1520504130.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T10:15:30.405Z,1520504130.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:30.802Z,1520504130.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T10:15:30.803Z,1520504130.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:31.199Z,1520504131.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T10:15:31.200Z,1520504131.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:31.620Z,1520504131.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T10:15:31.621Z,1520504131.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:32.002Z,1520504132.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T10:15:32.003Z,1520504132.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:32.401Z,1520504132.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T10:15:32.402Z,1520504132.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:32.801Z,1520504132.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T10:15:32.802Z,1520504132.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:33.220Z,1520504133.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T10:15:33.221Z,1520504133.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:33.603Z,1520504133.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T10:15:33.604Z,1520504133.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:34.002Z,1520504134.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T10:15:34.003Z,1520504134.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:34.406Z,1520504134.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T10:15:34.407Z,1520504134.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:34.827Z,1520504134.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T10:15:34.828Z,1520504134.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:35.195Z,1520504135.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T10:15:35.197Z,1520504135.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:35.611Z,1520504135.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T10:15:35.613Z,1520504135.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:36.003Z,1520504136.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T10:15:36.004Z,1520504136.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:36.422Z,1520504136.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T10:15:36.423Z,1520504136.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:36.808Z,1520504136.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T10:15:36.809Z,1520504136.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:37.210Z,1520504137.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T10:15:37.211Z,1520504137.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:37.622Z,1520504137.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T10:15:37.623Z,1520504137.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:38.009Z,1520504138.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T10:15:38.010Z,1520504138.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:38.411Z,1520504138.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T10:15:38.412Z,1520504138.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:38.806Z,1520504138.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T10:15:38.807Z,1520504138.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:39.201Z,1520504139.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T10:15:39.202Z,1520504139.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:39.610Z,1520504139.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T10:15:39.611Z,1520504139.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:40.007Z,1520504140.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T10:15:40.008Z,1520504140.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:40.407Z,1520504140.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T10:15:40.408Z,1520504140.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:40.815Z,1520504140.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T10:15:40.816Z,1520504140.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:41.212Z,1520504141.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T10:15:41.213Z,1520504141.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:41.609Z,1520504141.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T10:15:41.609Z,1520504141.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:42.007Z,1520504142.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T10:15:42.008Z,1520504142.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:42.403Z,1520504142.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T10:15:42.404Z,1520504142.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:42.810Z,1520504142.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T10:15:42.811Z,1520504142.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:43.208Z,1520504143.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T10:15:43.209Z,1520504143.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:43.610Z,1520504143.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T10:15:43.610Z,1520504143.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:44.000Z,1520504144.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T10:15:44.001Z,1520504144.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:44.413Z,1520504144.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T10:15:44.414Z,1520504144.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:44.806Z,1520504144.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T10:15:44.807Z,1520504144.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:45.210Z,1520504145.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T10:15:45.211Z,1520504145.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:45.615Z,1520504145.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T10:15:45.616Z,1520504145.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:46.011Z,1520504146.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T10:15:46.013Z,1520504146.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:46.409Z,1520504146.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T10:15:46.409Z,1520504146.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:46.807Z,1520504146.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T10:15:46.808Z,1520504146.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:47.209Z,1520504147.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T10:15:47.210Z,1520504147.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:47.608Z,1520504147.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T10:15:47.609Z,1520504147.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:48.008Z,1520504148.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T10:15:48.009Z,1520504148.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:48.406Z,1520504148.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T10:15:48.407Z,1520504148.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:48.806Z,1520504148.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T10:15:48.807Z,1520504148.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:49.215Z,1520504149.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:49.583Z,1520504149.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:50.011Z,1520504150.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:50.408Z,1520504150.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:50.811Z,1520504150.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:51.204Z,1520504151.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:51.613Z,1520504151.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:52.012Z,1520504152.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:52.417Z,1520504152.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:52.790Z,1520504152.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:53.189Z,1520504153.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:53.595Z,1520504153.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:54.016Z,1520504154.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:54.413Z,1520504154.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:54.798Z,1520504154.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:55.196Z,1520504155.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:55.618Z,1520504155.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:55.999Z,1520504155.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:56.417Z,1520504156.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:56.791Z,1520504156.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:57.218Z,1520504157.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:57.620Z,1520504157.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:57.994Z,1520504157.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:58.393Z,1520504158.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:58.822Z,1520504158.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:59.191Z,1520504159.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:59.621Z,1520504159.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:15:59.993Z,1520504159.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:00.430Z,1520504160.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:00.818Z,1520504160.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:01.217Z,1520504161.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:01.593Z,1520504161.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:02.022Z,1520504162.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:02.402Z,1520504162.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:02.802Z,1520504162.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:03.200Z,1520504163.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:03.622Z,1520504163.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:04.003Z,1520504164.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:04.399Z,1520504164.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:04.802Z,1520504164.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:05.226Z,1520504165.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:05.601Z,1520504165.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:05.000Z,1520504166.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:06.402Z,1520504166.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:06.820Z,1520504166.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:07.202Z,1520504167.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:07.602Z,1520504167.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:08.002Z,1520504168.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:08.422Z,1520504168.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:08.803Z,1520504168.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:09.200Z,1520504169.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:09.597Z,1520504169.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:10.019Z,1520504170.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:10.402Z,1520504170.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:10.799Z,1520504170.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:11.199Z,1520504171.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:11.621Z,1520504171.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:12.001Z,1520504172.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:12.402Z,1520504172.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:12.798Z,1520504172.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:13.221Z,1520504173.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:13.603Z,1520504173.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:14.002Z,1520504174.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:14.401Z,1520504174.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:14.819Z,1520504174.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:15.228Z,1520504175.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:15.604Z,1520504175.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:16.026Z,1520504176.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:16.420Z,1520504176.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:16.803Z,1520504176.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:17.202Z,1520504177.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:17.599Z,1520504177.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:18.021Z,1520504178.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:18.403Z,1520504178.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:18.800Z,1520504178.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:19.193Z,1520504179.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:19.621Z,1520504179.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:20.018Z,1520504180.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:20.402Z,1520504180.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:20.801Z,1520504180.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:21.223Z,1520504181.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:21.590Z,1520504181.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:22.002Z,1520504182.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:22.399Z,1520504182.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:22.811Z,1520504182.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:23.203Z,1520504183.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:23.602Z,1520504183.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:23.999Z,1520504183.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:27.095Z,1520504187.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:27.229Z,1520504187.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:27.575Z,1520504187.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:27.979Z,1520504187.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:28.377Z,1520504188.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:28.760Z,1520504188.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:29.164Z,1520504189.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:29.556Z,1520504189.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:29.961Z,1520504189.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:30.366Z,1520504190.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:30.758Z,1520504190.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:31.161Z,1520504191.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:31.566Z,1520504191.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:31.958Z,1520504191.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:32.365Z,1520504192.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:32.767Z,1520504192.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:33.158Z,1520504193.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:33.563Z,1520504193.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:33.967Z,1520504193.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:34.364Z,1520504194.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:34.763Z,1520504194.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:35.166Z,1520504195.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:35.560Z,1520504195.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:35.965Z,1520504195.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:36.363Z,1520504196.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:36.766Z,1520504196.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:37.166Z,1520504197.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:37.566Z,1520504197.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:37.966Z,1520504197.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:38.366Z,1520504198.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:38.763Z,1520504198.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:39.162Z,1520504199.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:39.560Z,1520504199.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:39.964Z,1520504199.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:40.360Z,1520504200.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:40.764Z,1520504200.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:41.166Z,1520504201.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:41.586Z,1520504201.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:41.966Z,1520504201.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:42.373Z,1520504202.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:42.769Z,1520504202.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:43.169Z,1520504203.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:43.568Z,1520504203.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:43.962Z,1520504203.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:44.369Z,1520504204.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:44.771Z,1520504204.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:45.169Z,1520504205.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:45.566Z,1520504205.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:45.969Z,1520504205.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:46.366Z,1520504206.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:46.768Z,1520504206.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:47.163Z,1520504207.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:47.571Z,1520504207.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:47.968Z,1520504207.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:48.372Z,1520504208.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:48.767Z,1520504208.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:49.168Z,1520504209.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:49.560Z,1520504209.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:49.971Z,1520504209.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:50.374Z,1520504210.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:50.771Z,1520504210.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:51.171Z,1520504211.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:51.572Z,1520504211.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:51.970Z,1520504211.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:52.373Z,1520504212.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:52.781Z,1520504212.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:53.150Z,1520504213.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:53.557Z,1520504213.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:53.960Z,1520504213.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:54.357Z,1520504214.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:54.765Z,1520504214.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:55.164Z,1520504215.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:55.561Z,1520504215.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:55.960Z,1520504215.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:56.366Z,1520504216.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:56.761Z,1520504216.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:57.166Z,1520504217.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:57.563Z,1520504217.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:57.961Z,1520504217.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:58.361Z,1520504218.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:58.763Z,1520504218.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:59.163Z,1520504219.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:59.566Z,1520504219.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:59.965Z,1520504219.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:16:59.978Z,1520504219.978 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T10:16:59.978Z,1520504219.978 [NAL9602] No Fault, FailCount= 5
2018-03-08T10:17:00.335Z,1520504220.335 [NAL9602](INFO): Powering up NAL9602
2018-03-08T10:17:00.374Z,1520504220.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:00.770Z,1520504220.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:01.170Z,1520504221.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:01.571Z,1520504221.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:01.963Z,1520504221.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:02.365Z,1520504222.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:02.804Z,1520504222.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:03.167Z,1520504223.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:03.571Z,1520504223.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:03.969Z,1520504223.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:04.369Z,1520504224.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:04.771Z,1520504224.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:05.162Z,1520504225.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:05.561Z,1520504225.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:05.961Z,1520504225.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:06.361Z,1520504226.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:06.761Z,1520504226.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:07.161Z,1520504227.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:07.554Z,1520504227.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:07.959Z,1520504227.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:08.405Z,1520504228.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:08.758Z,1520504228.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:09.159Z,1520504229.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:09.558Z,1520504229.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:09.954Z,1520504229.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:10.377Z,1520504230.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:10.759Z,1520504230.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:11.174Z,1520504231.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:11.526Z,1520504231.526 [NAL9602](INFO): NAL9602 initialized
2018-03-08T10:17:11.573Z,1520504231.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:11.970Z,1520504231.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:12.379Z,1520504232.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:12.783Z,1520504232.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:13.174Z,1520504233.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:13.575Z,1520504233.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:13.974Z,1520504233.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:14.379Z,1520504234.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:14.777Z,1520504234.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:15.184Z,1520504235.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:15.579Z,1520504235.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:15.972Z,1520504235.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:16.372Z,1520504236.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:16.780Z,1520504236.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:17.179Z,1520504237.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:17.581Z,1520504237.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:17.991Z,1520504237.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:18.377Z,1520504238.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:18.771Z,1520504238.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:19.195Z,1520504239.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:19.599Z,1520504239.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:19.993Z,1520504239.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:20.398Z,1520504240.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:20.762Z,1520504240.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:21.197Z,1520504241.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:21.599Z,1520504241.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:21.984Z,1520504241.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:22.374Z,1520504242.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:22.768Z,1520504242.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:23.180Z,1520504243.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:23.573Z,1520504243.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:23.997Z,1520504243.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:24.405Z,1520504244.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:27.470Z,1520504247.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:27.619Z,1520504247.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:27.980Z,1520504247.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:28.359Z,1520504248.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:28.762Z,1520504248.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:29.153Z,1520504249.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:29.554Z,1520504249.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:29.945Z,1520504249.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:30.356Z,1520504250.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:30.759Z,1520504250.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:31.159Z,1520504251.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:31.555Z,1520504251.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:31.954Z,1520504251.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:32.335Z,1520504252.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:32.758Z,1520504252.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:33.166Z,1520504253.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:33.561Z,1520504253.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:33.961Z,1520504253.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:34.334Z,1520504254.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:34.735Z,1520504254.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:35.159Z,1520504255.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:35.560Z,1520504255.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:35.959Z,1520504255.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:36.339Z,1520504256.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:36.735Z,1520504256.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:37.170Z,1520504257.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:37.542Z,1520504257.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:37.954Z,1520504257.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:38.343Z,1520504258.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:38.804Z,1520504258.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:39.196Z,1520504259.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:39.594Z,1520504259.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:39.960Z,1520504259.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:40.353Z,1520504260.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:40.759Z,1520504260.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:41.156Z,1520504261.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:41.562Z,1520504261.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:41.952Z,1520504261.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:42.348Z,1520504262.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:42.749Z,1520504262.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:43.157Z,1520504263.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:43.559Z,1520504263.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:43.955Z,1520504263.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:44.353Z,1520504264.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:44.730Z,1520504264.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:45.157Z,1520504265.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:45.552Z,1520504265.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:45.959Z,1520504265.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:46.354Z,1520504266.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:46.749Z,1520504266.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:47.167Z,1520504267.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:47.599Z,1520504267.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:47.962Z,1520504267.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:48.359Z,1520504268.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:48.775Z,1520504268.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:49.174Z,1520504269.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:49.591Z,1520504269.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:49.987Z,1520504269.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:50.346Z,1520504270.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:50.742Z,1520504270.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:51.149Z,1520504271.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:51.551Z,1520504271.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:51.955Z,1520504271.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:52.339Z,1520504272.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:52.747Z,1520504272.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:53.149Z,1520504273.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:53.548Z,1520504273.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:53.958Z,1520504273.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:54.347Z,1520504274.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:54.742Z,1520504274.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:55.159Z,1520504275.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:55.555Z,1520504275.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:55.953Z,1520504275.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:56.343Z,1520504276.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:56.742Z,1520504276.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:57.155Z,1520504277.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:57.562Z,1520504277.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:57.956Z,1520504277.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:58.343Z,1520504278.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:58.742Z,1520504278.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:59.146Z,1520504279.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:59.559Z,1520504279.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:17:59.962Z,1520504279.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:00.362Z,1520504280.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:00.747Z,1520504280.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:01.146Z,1520504281.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:01.547Z,1520504281.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:01.946Z,1520504281.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:02.351Z,1520504282.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:02.755Z,1520504282.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:03.151Z,1520504283.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:03.549Z,1520504283.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:03.945Z,1520504283.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:04.348Z,1520504284.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:04.740Z,1520504284.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:05.158Z,1520504285.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:05.556Z,1520504285.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:05.957Z,1520504285.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:06.353Z,1520504286.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:06.750Z,1520504286.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:07.158Z,1520504287.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:07.562Z,1520504287.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:07.955Z,1520504287.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:08.353Z,1520504288.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:08.730Z,1520504288.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:09.155Z,1520504289.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:09.553Z,1520504289.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:09.958Z,1520504289.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:10.336Z,1520504290.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:10.735Z,1520504290.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:11.159Z,1520504291.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:11.559Z,1520504291.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:11.954Z,1520504291.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:12.336Z,1520504292.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:12.738Z,1520504292.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:13.143Z,1520504293.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:13.563Z,1520504293.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:13.960Z,1520504293.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:14.338Z,1520504294.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:14.738Z,1520504294.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:15.161Z,1520504295.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:15.536Z,1520504295.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:15.944Z,1520504295.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:16.339Z,1520504296.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:16.735Z,1520504296.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:17.167Z,1520504297.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:17.546Z,1520504297.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:17.945Z,1520504297.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:18.339Z,1520504298.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:18.734Z,1520504298.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:19.145Z,1520504299.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:19.548Z,1520504299.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:19.944Z,1520504299.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:20.346Z,1520504300.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:20.747Z,1520504300.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:21.144Z,1520504301.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:21.543Z,1520504301.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:21.945Z,1520504301.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:22.339Z,1520504302.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:22.746Z,1520504302.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:23.144Z,1520504303.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:23.544Z,1520504303.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:23.945Z,1520504303.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:24.339Z,1520504304.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:24.750Z,1520504304.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:27.851Z,1520504307.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:27.992Z,1520504307.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:28.352Z,1520504308.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:28.740Z,1520504308.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:29.155Z,1520504309.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:29.547Z,1520504309.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:29.941Z,1520504309.941 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:29.941Z,1520504309.941 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52
2018-03-08T10:18:29.941Z,1520504309.941 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T10:18:29.943Z,1520504309.943 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:29.943Z,1520504309.943 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52
2018-03-08T10:18:29.943Z,1520504309.943 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T10:18:29.945Z,1520504309.945 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:29.945Z,1520504309.945 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 52
2018-03-08T10:18:29.945Z,1520504309.945 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T10:18:29.957Z,1520504309.957 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T10:18:29.957Z,1520504309.957 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T10:18:29.957Z,1520504309.957 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T10:18:30.387Z,1520504310.387 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T10:18:30.387Z,1520504310.387 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52
2018-03-08T10:18:30.387Z,1520504310.387 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T10:18:30.387Z,1520504310.387 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52
2018-03-08T10:18:30.388Z,1520504310.388 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T10:18:30.388Z,1520504310.388 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 52
2018-03-08T10:18:30.752Z,1520504310.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T10:18:30.753Z,1520504310.753 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:18:30.753Z,1520504310.753 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:18:30.753Z,1520504310.753 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T10:18:30.754Z,1520504310.754 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:18:30.754Z,1520504310.754 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:18:30.755Z,1520504310.755 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T10:18:30.755Z,1520504310.755 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:18:30.755Z,1520504310.755 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:18:31.152Z,1520504311.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T10:18:31.153Z,1520504311.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:31.544Z,1520504311.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T10:18:31.545Z,1520504311.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:31.950Z,1520504311.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T10:18:31.951Z,1520504311.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:32.350Z,1520504312.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T10:18:32.351Z,1520504312.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:32.743Z,1520504312.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T10:18:32.744Z,1520504312.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:33.166Z,1520504313.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T10:18:33.166Z,1520504313.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:33.555Z,1520504313.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T10:18:33.556Z,1520504313.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:33.953Z,1520504313.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T10:18:33.954Z,1520504313.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:34.350Z,1520504314.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T10:18:34.351Z,1520504314.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:34.743Z,1520504314.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T10:18:34.744Z,1520504314.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:35.171Z,1520504315.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T10:18:35.173Z,1520504315.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:35.562Z,1520504315.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T10:18:35.563Z,1520504315.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:35.957Z,1520504315.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T10:18:35.958Z,1520504315.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:36.358Z,1520504316.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T10:18:36.359Z,1520504316.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:36.751Z,1520504316.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T10:18:36.751Z,1520504316.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:37.155Z,1520504317.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T10:18:37.156Z,1520504317.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:37.556Z,1520504317.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T10:18:37.557Z,1520504317.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:37.958Z,1520504317.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T10:18:37.959Z,1520504317.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:38.348Z,1520504318.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T10:18:38.349Z,1520504318.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:38.752Z,1520504318.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T10:18:38.753Z,1520504318.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:39.157Z,1520504319.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T10:18:39.158Z,1520504319.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:39.562Z,1520504319.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T10:18:39.563Z,1520504319.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:39.956Z,1520504319.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T10:18:39.957Z,1520504319.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:40.354Z,1520504320.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T10:18:40.355Z,1520504320.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:40.732Z,1520504320.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T10:18:40.733Z,1520504320.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:41.159Z,1520504321.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T10:18:41.160Z,1520504321.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:41.560Z,1520504321.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T10:18:41.561Z,1520504321.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:41.959Z,1520504321.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T10:18:41.960Z,1520504321.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:42.359Z,1520504322.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T10:18:42.360Z,1520504322.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:42.746Z,1520504322.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T10:18:42.747Z,1520504322.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:43.146Z,1520504323.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T10:18:43.147Z,1520504323.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:43.570Z,1520504323.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T10:18:43.570Z,1520504323.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:43.967Z,1520504323.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T10:18:43.968Z,1520504323.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:44.339Z,1520504324.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T10:18:44.342Z,1520504324.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:44.741Z,1520504324.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T10:18:44.741Z,1520504324.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:45.145Z,1520504325.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T10:18:45.146Z,1520504325.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:45.550Z,1520504325.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T10:18:45.551Z,1520504325.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:45.956Z,1520504325.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T10:18:45.973Z,1520504325.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:46.346Z,1520504326.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T10:18:46.346Z,1520504326.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:46.737Z,1520504326.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T10:18:46.738Z,1520504326.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:47.147Z,1520504327.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T10:18:47.147Z,1520504327.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:47.547Z,1520504327.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T10:18:47.548Z,1520504327.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:47.954Z,1520504327.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T10:18:47.955Z,1520504327.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:48.346Z,1520504328.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T10:18:48.347Z,1520504328.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:48.740Z,1520504328.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T10:18:48.741Z,1520504328.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:49.148Z,1520504329.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T10:18:49.149Z,1520504329.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:49.559Z,1520504329.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T10:18:49.560Z,1520504329.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:49.957Z,1520504329.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:50.347Z,1520504330.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:50.754Z,1520504330.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:51.156Z,1520504331.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:51.552Z,1520504331.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:51.958Z,1520504331.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:52.343Z,1520504332.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:52.744Z,1520504332.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:53.151Z,1520504333.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:53.555Z,1520504333.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:53.959Z,1520504333.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:54.344Z,1520504334.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:54.751Z,1520504334.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:55.154Z,1520504335.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:55.562Z,1520504335.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:55.961Z,1520504335.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:56.343Z,1520504336.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:56.743Z,1520504336.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:57.159Z,1520504337.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:57.555Z,1520504337.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:57.962Z,1520504337.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:58.350Z,1520504338.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:58.745Z,1520504338.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:59.158Z,1520504339.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:59.553Z,1520504339.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:18:59.949Z,1520504339.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:00.345Z,1520504340.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:00.745Z,1520504340.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:01.149Z,1520504341.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:01.567Z,1520504341.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:01.962Z,1520504341.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:02.343Z,1520504342.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:02.743Z,1520504342.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:03.170Z,1520504343.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:03.549Z,1520504343.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:03.962Z,1520504343.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:04.358Z,1520504344.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:04.745Z,1520504344.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:05.162Z,1520504345.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:05.561Z,1520504345.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:05.953Z,1520504345.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:06.351Z,1520504346.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:06.746Z,1520504346.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:07.159Z,1520504347.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:07.559Z,1520504347.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:07.957Z,1520504347.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:08.344Z,1520504348.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:08.743Z,1520504348.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:09.162Z,1520504349.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:09.554Z,1520504349.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:09.963Z,1520504349.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:10.349Z,1520504350.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:10.750Z,1520504350.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:11.161Z,1520504351.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:11.560Z,1520504351.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:11.962Z,1520504351.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:12.353Z,1520504352.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:12.747Z,1520504352.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:13.166Z,1520504353.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:13.563Z,1520504353.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:13.964Z,1520504353.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:14.355Z,1520504354.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:14.765Z,1520504354.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:15.167Z,1520504355.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:15.570Z,1520504355.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:15.963Z,1520504355.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:16.363Z,1520504356.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:16.736Z,1520504356.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:17.169Z,1520504357.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:17.575Z,1520504357.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:17.944Z,1520504357.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:18.345Z,1520504358.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:18.744Z,1520504358.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:19.148Z,1520504359.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:19.556Z,1520504359.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:19.949Z,1520504359.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:20.354Z,1520504360.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:20.751Z,1520504360.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:21.153Z,1520504361.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:21.552Z,1520504361.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:21.952Z,1520504361.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:22.348Z,1520504362.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:22.747Z,1520504362.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:23.152Z,1520504363.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:23.559Z,1520504363.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:23.955Z,1520504363.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:24.343Z,1520504364.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:24.749Z,1520504364.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:27.857Z,1520504367.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:27.995Z,1520504367.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:28.379Z,1520504368.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:28.746Z,1520504368.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:29.143Z,1520504369.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:29.544Z,1520504369.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:29.946Z,1520504369.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:30.356Z,1520504370.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:30.755Z,1520504370.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:31.155Z,1520504371.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:31.545Z,1520504371.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:31.943Z,1520504371.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:32.351Z,1520504372.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:32.741Z,1520504372.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:33.152Z,1520504373.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:33.555Z,1520504373.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:33.955Z,1520504373.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:34.351Z,1520504374.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:34.740Z,1520504374.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:35.162Z,1520504375.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:35.544Z,1520504375.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:35.946Z,1520504375.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:36.355Z,1520504376.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:36.755Z,1520504376.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:37.157Z,1520504377.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:37.549Z,1520504377.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:37.944Z,1520504377.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:38.342Z,1520504378.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:38.741Z,1520504378.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:39.151Z,1520504379.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:39.562Z,1520504379.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:39.953Z,1520504379.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:40.359Z,1520504380.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:40.743Z,1520504380.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:41.145Z,1520504381.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:41.544Z,1520504381.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:41.947Z,1520504381.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:42.356Z,1520504382.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:42.763Z,1520504382.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:43.162Z,1520504383.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:43.545Z,1520504383.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:43.951Z,1520504383.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:44.350Z,1520504384.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:44.747Z,1520504384.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:45.154Z,1520504385.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:45.557Z,1520504385.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:45.960Z,1520504385.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:46.370Z,1520504386.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:46.751Z,1520504386.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:47.147Z,1520504387.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:47.552Z,1520504387.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:47.946Z,1520504387.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:48.356Z,1520504388.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:48.759Z,1520504388.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:49.160Z,1520504389.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:49.554Z,1520504389.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:49.953Z,1520504389.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:50.351Z,1520504390.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:50.735Z,1520504390.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:51.136Z,1520504391.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:51.565Z,1520504391.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:51.959Z,1520504391.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:52.361Z,1520504392.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:52.740Z,1520504392.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:53.166Z,1520504393.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:53.543Z,1520504393.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:53.943Z,1520504393.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:54.366Z,1520504394.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:54.765Z,1520504394.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:55.169Z,1520504395.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:55.543Z,1520504395.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:55.949Z,1520504395.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:56.349Z,1520504396.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:56.745Z,1520504396.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:57.148Z,1520504397.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:57.553Z,1520504397.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:57.949Z,1520504397.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:58.347Z,1520504398.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:58.740Z,1520504398.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:59.149Z,1520504399.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:59.549Z,1520504399.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:19:59.954Z,1520504399.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:00.343Z,1520504400.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:00.742Z,1520504400.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:01.153Z,1520504401.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:01.553Z,1520504401.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:01.951Z,1520504401.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:02.346Z,1520504402.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:02.742Z,1520504402.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:03.159Z,1520504403.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:03.555Z,1520504403.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:03.956Z,1520504403.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:04.346Z,1520504404.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:04.746Z,1520504404.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:05.155Z,1520504405.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:05.555Z,1520504405.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:05.963Z,1520504405.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:06.351Z,1520504406.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:06.743Z,1520504406.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:07.166Z,1520504407.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:07.556Z,1520504407.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:07.953Z,1520504407.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:08.345Z,1520504408.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:08.748Z,1520504408.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:09.158Z,1520504409.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:09.552Z,1520504409.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:09.956Z,1520504409.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:10.344Z,1520504410.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:10.750Z,1520504410.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:11.156Z,1520504411.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:11.556Z,1520504411.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:11.966Z,1520504411.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:12.348Z,1520504412.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:12.744Z,1520504412.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:13.157Z,1520504413.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:13.560Z,1520504413.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:13.952Z,1520504413.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:14.350Z,1520504414.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:14.748Z,1520504414.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:15.153Z,1520504415.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:15.563Z,1520504415.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:15.952Z,1520504415.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:16.351Z,1520504416.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:16.750Z,1520504416.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:17.156Z,1520504417.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:17.563Z,1520504417.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:17.957Z,1520504417.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:18.348Z,1520504418.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:18.743Z,1520504418.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:19.167Z,1520504419.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:19.557Z,1520504419.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:19.952Z,1520504419.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:20.346Z,1520504420.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:20.747Z,1520504420.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:21.152Z,1520504421.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:21.552Z,1520504421.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:21.956Z,1520504421.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:22.353Z,1520504422.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:22.744Z,1520504422.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:23.156Z,1520504423.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:23.556Z,1520504423.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:23.962Z,1520504423.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:23.965Z,1520504423.965 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T10:15:23.6Z
2018-03-08T10:20:23.965Z,1520504423.965 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T10:20:23.965Z,1520504423.965 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T10:20:24.344Z,1520504424.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:24.847Z,1520504424.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:27.850Z,1520504427.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:28.022Z,1520504428.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:28.281Z,1520504428.281 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180308T074127/Courier0060.lzma
2018-03-08T10:20:28.347Z,1520504428.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:28.722Z,1520504428.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:29.079Z,1520504429.079 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0060.lzma.bak
2018-03-08T10:20:29.079Z,1520504429.079 [DataOverHttps](INFO): SBD MOMSN=7984798
2018-03-08T10:20:29.143Z,1520504429.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:29.702Z,1520504429.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:29.949Z,1520504429.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:33.055Z,1520504433.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:33.197Z,1520504433.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:33.553Z,1520504433.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:33.927Z,1520504433.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:34.329Z,1520504434.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:34.737Z,1520504434.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:35.151Z,1520504435.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:38.243Z,1520504438.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:38.391Z,1520504438.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:38.676Z,1520504438.676 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180308T074127/Express0061.lzma
2018-03-08T10:20:38.712Z,1520504438.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:39.111Z,1520504439.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:39.475Z,1520504439.475 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0061.lzma.bak
2018-03-08T10:20:39.475Z,1520504439.475 [DataOverHttps](INFO): SBD MOMSN=7984841
2018-03-08T10:20:39.519Z,1520504439.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:40.106Z,1520504440.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:40.110Z,1520504440.110 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T10:20:40.110Z,1520504440.110 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T10:20:40.110Z,1520504440.110 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T10:20:40.342Z,1520504440.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:43.444Z,1520504443.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:43.586Z,1520504443.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:43.918Z,1520504443.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:44.311Z,1520504444.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:44.711Z,1520504444.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:45.115Z,1520504445.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:45.546Z,1520504445.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:45.924Z,1520504445.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:46.328Z,1520504446.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:46.717Z,1520504446.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:47.111Z,1520504447.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:47.519Z,1520504447.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:47.914Z,1520504447.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:48.325Z,1520504448.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:48.724Z,1520504448.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:49.130Z,1520504449.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:49.509Z,1520504449.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:49.914Z,1520504449.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:50.318Z,1520504450.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:50.723Z,1520504450.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:51.118Z,1520504451.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:51.524Z,1520504451.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:51.920Z,1520504451.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:52.319Z,1520504452.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:52.714Z,1520504452.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:53.110Z,1520504453.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:53.536Z,1520504453.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:53.922Z,1520504453.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:54.335Z,1520504454.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:54.727Z,1520504454.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:55.128Z,1520504455.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:55.515Z,1520504455.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:55.925Z,1520504455.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:56.319Z,1520504456.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:56.721Z,1520504456.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:57.116Z,1520504457.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:57.527Z,1520504457.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:57.928Z,1520504457.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:58.327Z,1520504458.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:58.719Z,1520504458.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:59.121Z,1520504459.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:59.518Z,1520504459.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:20:59.915Z,1520504459.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:00.327Z,1520504460.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:00.727Z,1520504460.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:01.134Z,1520504461.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:01.517Z,1520504461.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:01.921Z,1520504461.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:02.317Z,1520504462.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:02.721Z,1520504462.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:03.118Z,1520504463.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:03.532Z,1520504463.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:03.932Z,1520504463.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:04.326Z,1520504464.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:04.723Z,1520504464.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:05.122Z,1520504465.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:05.521Z,1520504465.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:05.933Z,1520504465.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:06.329Z,1520504466.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:06.735Z,1520504466.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:07.135Z,1520504467.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:07.504Z,1520504467.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:07.931Z,1520504467.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:08.310Z,1520504468.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:08.706Z,1520504468.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:09.111Z,1520504469.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:09.535Z,1520504469.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:09.936Z,1520504469.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:10.331Z,1520504470.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:10.711Z,1520504470.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:11.115Z,1520504471.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:11.510Z,1520504471.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:11.913Z,1520504471.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:12.337Z,1520504472.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:12.743Z,1520504472.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:13.143Z,1520504473.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:13.526Z,1520504473.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:13.916Z,1520504473.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:14.327Z,1520504474.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:14.711Z,1520504474.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:15.116Z,1520504475.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:15.521Z,1520504475.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:15.930Z,1520504475.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:16.329Z,1520504476.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:16.718Z,1520504476.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:17.114Z,1520504477.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:17.518Z,1520504477.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:17.912Z,1520504477.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:18.327Z,1520504478.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:18.734Z,1520504478.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:19.127Z,1520504479.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:19.521Z,1520504479.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:19.918Z,1520504479.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:20.318Z,1520504480.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:20.715Z,1520504480.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:21.119Z,1520504481.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:21.528Z,1520504481.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:21.928Z,1520504481.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:22.324Z,1520504482.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:22.718Z,1520504482.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:23.117Z,1520504483.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:23.516Z,1520504483.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:23.922Z,1520504483.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:24.320Z,1520504484.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:24.734Z,1520504484.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:25.128Z,1520504485.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:25.511Z,1520504485.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:25.925Z,1520504485.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:26.319Z,1520504486.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:26.717Z,1520504486.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:27.118Z,1520504487.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:27.526Z,1520504487.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:27.931Z,1520504487.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:28.324Z,1520504488.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:28.718Z,1520504488.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:29.121Z,1520504489.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:29.527Z,1520504489.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:29.920Z,1520504489.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:30.329Z,1520504490.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:30.729Z,1520504490.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:31.135Z,1520504491.135 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:31.136Z,1520504491.136 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53
2018-03-08T10:21:31.136Z,1520504491.136 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T10:21:31.137Z,1520504491.137 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:31.137Z,1520504491.137 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53
2018-03-08T10:21:31.138Z,1520504491.138 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T10:21:31.139Z,1520504491.139 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:31.139Z,1520504491.139 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 53
2018-03-08T10:21:31.139Z,1520504491.139 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T10:21:31.163Z,1520504491.163 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T10:21:31.164Z,1520504491.164 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T10:21:31.164Z,1520504491.164 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T10:21:31.531Z,1520504491.531 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T10:21:31.531Z,1520504491.531 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53
2018-03-08T10:21:31.532Z,1520504491.532 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T10:21:31.532Z,1520504491.532 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53
2018-03-08T10:21:31.532Z,1520504491.532 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T10:21:31.532Z,1520504491.532 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 53
2018-03-08T10:21:31.925Z,1520504491.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T10:21:31.925Z,1520504491.925 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:21:31.926Z,1520504491.926 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:21:31.926Z,1520504491.926 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T10:21:31.926Z,1520504491.926 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:21:31.927Z,1520504491.927 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:21:31.927Z,1520504491.927 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T10:21:31.928Z,1520504491.928 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:21:31.928Z,1520504491.928 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:21:32.325Z,1520504492.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T10:21:32.326Z,1520504492.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:32.700Z,1520504492.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T10:21:32.701Z,1520504492.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:33.130Z,1520504493.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T10:21:33.131Z,1520504493.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:33.542Z,1520504493.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T10:21:33.543Z,1520504493.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:33.934Z,1520504493.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T10:21:33.935Z,1520504493.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:34.338Z,1520504494.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T10:21:34.339Z,1520504494.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:34.738Z,1520504494.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T10:21:34.739Z,1520504494.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:35.100Z,1520504495.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T10:21:35.101Z,1520504495.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:35.531Z,1520504495.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T10:21:35.532Z,1520504495.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:35.914Z,1520504495.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T10:21:35.915Z,1520504495.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:36.337Z,1520504496.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T10:21:36.338Z,1520504496.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:36.737Z,1520504496.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T10:21:36.738Z,1520504496.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:37.146Z,1520504497.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T10:21:37.147Z,1520504497.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:37.507Z,1520504497.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T10:21:37.508Z,1520504497.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:37.914Z,1520504497.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T10:21:37.915Z,1520504497.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:38.318Z,1520504498.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T10:21:38.319Z,1520504498.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:38.714Z,1520504498.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T10:21:38.715Z,1520504498.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:39.110Z,1520504499.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T10:21:39.111Z,1520504499.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:39.537Z,1520504499.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T10:21:39.538Z,1520504499.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:39.916Z,1520504499.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T10:21:39.917Z,1520504499.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:40.328Z,1520504500.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T10:21:40.345Z,1520504500.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:40.718Z,1520504500.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T10:21:40.719Z,1520504500.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:43.812Z,1520504503.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2018-03-08T10:21:43.813Z,1520504503.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:43.827Z,1520504503.827 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T10:21:43.951Z,1520504503.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T10:21:43.952Z,1520504503.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:44.304Z,1520504504.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T10:21:44.305Z,1520504504.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:44.705Z,1520504504.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T10:21:44.706Z,1520504504.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:45.114Z,1520504505.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T10:21:45.115Z,1520504505.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:45.501Z,1520504505.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T10:21:45.502Z,1520504505.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:45.882Z,1520504505.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-03-08T10:21:45.883Z,1520504505.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:46.276Z,1520504506.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2018-03-08T10:21:46.277Z,1520504506.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:46.708Z,1520504506.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T10:21:46.709Z,1520504506.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:47.087Z,1520504507.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T10:21:47.088Z,1520504507.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:47.506Z,1520504507.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T10:21:47.507Z,1520504507.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:47.914Z,1520504507.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T10:21:47.915Z,1520504507.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:48.313Z,1520504508.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T10:21:48.314Z,1520504508.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:48.679Z,1520504508.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2018-03-08T10:21:48.680Z,1520504508.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:49.090Z,1520504509.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T10:21:49.091Z,1520504509.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:49.486Z,1520504509.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T10:21:49.487Z,1520504509.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:49.879Z,1520504509.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-03-08T10:21:49.880Z,1520504509.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:50.308Z,1520504510.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T10:21:50.309Z,1520504510.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:50.713Z,1520504510.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T10:21:50.714Z,1520504510.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:51.084Z,1520504511.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-03-08T10:21:51.085Z,1520504511.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:51.491Z,1520504511.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:51.879Z,1520504511.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:52.291Z,1520504512.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:52.687Z,1520504512.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:53.085Z,1520504513.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:53.484Z,1520504513.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:53.911Z,1520504513.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:54.313Z,1520504514.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:54.682Z,1520504514.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:55.087Z,1520504515.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:55.487Z,1520504515.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:55.886Z,1520504515.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:56.293Z,1520504516.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:56.716Z,1520504516.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:57.089Z,1520504517.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:57.483Z,1520504517.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:57.882Z,1520504517.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:58.287Z,1520504518.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:58.687Z,1520504518.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:59.082Z,1520504519.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:59.491Z,1520504519.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:21:59.913Z,1520504519.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:00.291Z,1520504520.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:00.679Z,1520504520.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:01.091Z,1520504521.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:01.487Z,1520504521.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:01.891Z,1520504521.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:02.292Z,1520504522.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:02.700Z,1520504522.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:03.127Z,1520504523.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:03.491Z,1520504523.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:03.886Z,1520504523.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:04.291Z,1520504524.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:04.698Z,1520504524.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:05.087Z,1520504525.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:05.489Z,1520504525.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:05.892Z,1520504525.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:06.320Z,1520504526.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:06.680Z,1520504526.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:07.093Z,1520504527.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:07.492Z,1520504527.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:07.891Z,1520504527.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:08.302Z,1520504528.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:08.702Z,1520504528.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:09.102Z,1520504529.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:09.491Z,1520504529.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:09.889Z,1520504529.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:10.291Z,1520504530.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:10.688Z,1520504530.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:11.091Z,1520504531.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:11.496Z,1520504531.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:11.895Z,1520504531.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:12.302Z,1520504532.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:12.681Z,1520504532.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:13.095Z,1520504533.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:13.491Z,1520504533.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:13.890Z,1520504533.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:14.299Z,1520504534.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:14.700Z,1520504534.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:15.099Z,1520504535.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:15.491Z,1520504535.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:15.893Z,1520504535.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:16.288Z,1520504536.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:16.687Z,1520504536.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:17.090Z,1520504537.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:17.501Z,1520504537.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:17.904Z,1520504537.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:18.310Z,1520504538.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:18.690Z,1520504538.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:19.095Z,1520504539.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:19.499Z,1520504539.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:19.892Z,1520504539.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:20.302Z,1520504540.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:20.702Z,1520504540.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:21.112Z,1520504541.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:21.492Z,1520504541.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:21.890Z,1520504541.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:22.288Z,1520504542.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:22.699Z,1520504542.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:23.095Z,1520504543.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:23.502Z,1520504543.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:23.907Z,1520504543.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:24.305Z,1520504544.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:24.691Z,1520504544.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:25.098Z,1520504545.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:25.498Z,1520504545.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:25.902Z,1520504545.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:26.301Z,1520504546.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:26.710Z,1520504546.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:27.103Z,1520504547.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:27.507Z,1520504547.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:27.878Z,1520504547.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:28.307Z,1520504548.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:28.691Z,1520504548.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:29.082Z,1520504549.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:29.485Z,1520504549.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:29.917Z,1520504549.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:30.295Z,1520504550.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:30.687Z,1520504550.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:31.085Z,1520504551.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:31.490Z,1520504551.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:31.890Z,1520504551.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:32.316Z,1520504552.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:32.695Z,1520504552.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:33.093Z,1520504553.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:33.485Z,1520504553.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:33.882Z,1520504553.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:34.290Z,1520504554.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:34.694Z,1520504554.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:35.085Z,1520504555.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:35.493Z,1520504555.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:35.896Z,1520504555.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:36.292Z,1520504556.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:36.689Z,1520504556.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:37.087Z,1520504557.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:37.486Z,1520504557.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:37.889Z,1520504557.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:38.299Z,1520504558.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:38.695Z,1520504558.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:39.093Z,1520504559.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:39.488Z,1520504559.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:39.889Z,1520504559.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:40.289Z,1520504560.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:40.725Z,1520504560.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:41.082Z,1520504561.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:44.690Z,1520504564.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:44.799Z,1520504564.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:45.193Z,1520504565.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:45.578Z,1520504565.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:45.994Z,1520504565.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:46.387Z,1520504566.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:46.785Z,1520504566.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:47.189Z,1520504567.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:47.596Z,1520504567.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:48.003Z,1520504568.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:48.399Z,1520504568.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:48.782Z,1520504568.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:49.188Z,1520504569.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:49.595Z,1520504569.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:50.019Z,1520504570.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:50.383Z,1520504570.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:50.779Z,1520504570.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:51.197Z,1520504571.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:51.603Z,1520504571.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:52.003Z,1520504572.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:52.384Z,1520504572.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:52.793Z,1520504572.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:53.192Z,1520504573.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:53.599Z,1520504573.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:53.996Z,1520504573.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:54.387Z,1520504574.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:54.781Z,1520504574.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:55.188Z,1520504575.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:55.601Z,1520504575.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:56.002Z,1520504576.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:56.394Z,1520504576.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:56.783Z,1520504576.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:57.181Z,1520504577.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:57.586Z,1520504577.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:57.990Z,1520504577.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:58.403Z,1520504578.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:58.792Z,1520504578.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:59.207Z,1520504579.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:59.604Z,1520504579.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:22:59.983Z,1520504579.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:00.393Z,1520504580.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:00.797Z,1520504580.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:01.186Z,1520504581.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:01.606Z,1520504581.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:02.002Z,1520504582.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:02.389Z,1520504582.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:02.789Z,1520504582.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:03.200Z,1520504583.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:03.606Z,1520504583.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:03.997Z,1520504583.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:04.390Z,1520504584.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:04.767Z,1520504584.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:05.195Z,1520504585.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:05.611Z,1520504585.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:06.004Z,1520504586.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:06.398Z,1520504586.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:06.775Z,1520504586.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:07.201Z,1520504587.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:07.652Z,1520504587.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:08.022Z,1520504588.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:08.402Z,1520504588.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:08.802Z,1520504588.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:09.207Z,1520504589.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:09.603Z,1520504589.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:10.013Z,1520504590.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:10.402Z,1520504590.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:10.775Z,1520504590.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:11.209Z,1520504591.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:11.607Z,1520504591.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:12.001Z,1520504592.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:12.406Z,1520504592.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:12.775Z,1520504592.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:13.206Z,1520504593.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:13.605Z,1520504593.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:14.016Z,1520504594.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:14.386Z,1520504594.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:14.782Z,1520504594.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:15.217Z,1520504595.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:15.616Z,1520504595.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:15.990Z,1520504595.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:16.386Z,1520504596.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:16.787Z,1520504596.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:17.188Z,1520504597.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:17.587Z,1520504597.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:17.994Z,1520504597.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:18.387Z,1520504598.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:18.782Z,1520504598.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:19.187Z,1520504599.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:19.596Z,1520504599.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:19.993Z,1520504599.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:20.415Z,1520504600.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:20.778Z,1520504600.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:21.196Z,1520504601.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:21.593Z,1520504601.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:22.016Z,1520504602.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:22.382Z,1520504602.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:22.778Z,1520504602.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:23.191Z,1520504603.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:23.599Z,1520504603.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:23.999Z,1520504603.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:24.392Z,1520504604.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:24.788Z,1520504604.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:25.198Z,1520504605.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:25.598Z,1520504605.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:25.997Z,1520504605.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:26.386Z,1520504606.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:26.786Z,1520504606.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:27.194Z,1520504607.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:27.600Z,1520504607.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:27.995Z,1520504607.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:28.395Z,1520504608.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:28.787Z,1520504608.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:29.194Z,1520504609.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:29.599Z,1520504609.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:30.017Z,1520504610.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:30.383Z,1520504610.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:30.782Z,1520504610.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:31.196Z,1520504611.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:31.626Z,1520504611.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:31.993Z,1520504611.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:32.385Z,1520504612.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:32.787Z,1520504612.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:33.190Z,1520504613.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:33.602Z,1520504613.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:33.997Z,1520504613.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:34.387Z,1520504614.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:34.783Z,1520504614.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:35.188Z,1520504615.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:35.598Z,1520504615.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:35.996Z,1520504615.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:36.398Z,1520504616.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:36.784Z,1520504616.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:37.198Z,1520504617.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:37.603Z,1520504617.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:38.012Z,1520504618.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:38.379Z,1520504618.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:38.779Z,1520504618.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:39.196Z,1520504619.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:39.622Z,1520504619.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:39.993Z,1520504619.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:40.388Z,1520504620.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:40.788Z,1520504620.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:41.194Z,1520504621.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:44.298Z,1520504624.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:44.435Z,1520504624.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:44.825Z,1520504624.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:45.203Z,1520504625.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:45.597Z,1520504625.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:46.023Z,1520504626.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:46.409Z,1520504626.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:46.805Z,1520504626.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:47.202Z,1520504627.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:47.626Z,1520504627.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:48.006Z,1520504628.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:48.401Z,1520504628.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:48.801Z,1520504628.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:49.223Z,1520504629.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:49.605Z,1520504629.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:50.006Z,1520504630.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:50.398Z,1520504630.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:50.824Z,1520504630.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:51.203Z,1520504631.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:51.604Z,1520504631.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:52.002Z,1520504632.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:52.426Z,1520504632.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:52.805Z,1520504632.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:53.205Z,1520504633.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:53.601Z,1520504633.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:54.024Z,1520504634.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:54.406Z,1520504634.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:54.804Z,1520504634.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:55.212Z,1520504635.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:55.630Z,1520504635.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:56.007Z,1520504636.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:56.395Z,1520504636.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:56.798Z,1520504636.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:57.228Z,1520504637.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:57.604Z,1520504637.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:58.001Z,1520504638.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:58.403Z,1520504638.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:58.822Z,1520504638.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:59.204Z,1520504639.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:23:59.603Z,1520504639.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:00.007Z,1520504640.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:00.424Z,1520504640.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:00.803Z,1520504640.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:01.211Z,1520504641.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:01.619Z,1520504641.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:02.019Z,1520504642.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:02.404Z,1520504642.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:02.800Z,1520504642.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:03.203Z,1520504643.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:03.618Z,1520504643.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:04.006Z,1520504644.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:04.413Z,1520504644.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:04.807Z,1520504644.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:05.226Z,1520504645.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:05.604Z,1520504645.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:06.004Z,1520504646.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:06.401Z,1520504646.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:06.805Z,1520504646.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:07.214Z,1520504647.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:07.616Z,1520504647.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:08.012Z,1520504648.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:08.410Z,1520504648.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:08.810Z,1520504648.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:09.216Z,1520504649.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:09.604Z,1520504649.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:10.011Z,1520504650.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:10.415Z,1520504650.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:10.823Z,1520504650.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:11.211Z,1520504651.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:11.603Z,1520504651.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:12.010Z,1520504652.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:12.408Z,1520504652.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:12.806Z,1520504652.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:13.220Z,1520504653.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:13.616Z,1520504653.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:14.016Z,1520504654.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:14.404Z,1520504654.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:14.802Z,1520504654.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:15.213Z,1520504655.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:15.620Z,1520504655.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:16.006Z,1520504656.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:16.417Z,1520504656.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:16.805Z,1520504656.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:17.215Z,1520504657.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:17.595Z,1520504657.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:18.018Z,1520504658.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:18.413Z,1520504658.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:18.796Z,1520504658.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:19.219Z,1520504659.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:19.622Z,1520504659.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:20.020Z,1520504660.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:20.392Z,1520504660.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:20.796Z,1520504660.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:21.199Z,1520504661.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:21.592Z,1520504661.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:21.996Z,1520504661.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:22.425Z,1520504662.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:22.819Z,1520504662.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:23.222Z,1520504663.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:23.599Z,1520504663.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:23.995Z,1520504663.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:24.421Z,1520504664.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:24.797Z,1520504664.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:25.201Z,1520504665.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:25.625Z,1520504665.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:26.022Z,1520504666.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:26.390Z,1520504666.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:26.796Z,1520504666.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:27.196Z,1520504667.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:27.619Z,1520504667.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:27.995Z,1520504667.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:28.423Z,1520504668.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:28.796Z,1520504668.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:29.226Z,1520504669.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:29.598Z,1520504669.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:29.997Z,1520504669.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:30.417Z,1520504670.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:30.827Z,1520504670.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:31.202Z,1520504671.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:31.626Z,1520504671.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:32.003Z,1520504672.003 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:32.003Z,1520504672.003 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54
2018-03-08T10:24:32.003Z,1520504672.003 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T10:24:32.005Z,1520504672.005 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:32.005Z,1520504672.005 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54
2018-03-08T10:24:32.005Z,1520504672.005 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T10:24:32.007Z,1520504672.007 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:32.007Z,1520504672.007 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 54
2018-03-08T10:24:32.007Z,1520504672.007 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T10:24:32.049Z,1520504672.049 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T10:24:32.050Z,1520504672.050 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T10:24:32.050Z,1520504672.050 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T10:24:32.435Z,1520504672.435 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T10:24:32.436Z,1520504672.436 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54
2018-03-08T10:24:32.436Z,1520504672.436 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T10:24:32.436Z,1520504672.436 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54
2018-03-08T10:24:32.437Z,1520504672.437 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T10:24:32.437Z,1520504672.437 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 54
2018-03-08T10:24:32.802Z,1520504672.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T10:24:32.803Z,1520504672.803 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:24:32.803Z,1520504672.803 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:24:32.803Z,1520504672.803 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T10:24:32.804Z,1520504672.804 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:24:32.804Z,1520504672.804 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:24:32.805Z,1520504672.805 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T10:24:32.805Z,1520504672.805 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:24:32.806Z,1520504672.806 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:24:33.201Z,1520504673.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T10:24:33.202Z,1520504673.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:33.605Z,1520504673.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T10:24:33.605Z,1520504673.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:34.029Z,1520504674.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T10:24:34.030Z,1520504674.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:34.413Z,1520504674.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T10:24:34.414Z,1520504674.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:34.807Z,1520504674.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T10:24:34.808Z,1520504674.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:35.216Z,1520504675.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T10:24:35.225Z,1520504675.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:35.615Z,1520504675.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T10:24:35.616Z,1520504675.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:35.000Z,1520504676.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T10:24:36.002Z,1520504676.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:36.404Z,1520504676.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T10:24:36.405Z,1520504676.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:36.803Z,1520504676.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T10:24:36.804Z,1520504676.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:37.235Z,1520504677.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T10:24:37.237Z,1520504677.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:37.612Z,1520504677.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T10:24:37.613Z,1520504677.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:38.010Z,1520504678.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T10:24:38.010Z,1520504678.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:38.396Z,1520504678.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T10:24:38.397Z,1520504678.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:38.816Z,1520504678.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T10:24:38.817Z,1520504678.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:39.203Z,1520504679.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T10:24:39.204Z,1520504679.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:39.603Z,1520504679.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T10:24:39.604Z,1520504679.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:40.002Z,1520504680.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T10:24:40.003Z,1520504680.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:40.419Z,1520504680.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T10:24:40.420Z,1520504680.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:40.806Z,1520504680.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T10:24:40.807Z,1520504680.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:41.214Z,1520504681.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T10:24:41.215Z,1520504681.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:44.294Z,1520504684.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2018-03-08T10:24:44.295Z,1520504684.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:44.411Z,1520504684.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T10:24:44.412Z,1520504684.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:44.798Z,1520504684.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T10:24:44.799Z,1520504684.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:45.194Z,1520504685.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T10:24:45.195Z,1520504685.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:45.568Z,1520504685.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T10:24:45.569Z,1520504685.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:45.963Z,1520504685.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T10:24:45.963Z,1520504685.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:46.363Z,1520504686.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T10:24:46.364Z,1520504686.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:46.774Z,1520504686.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T10:24:46.775Z,1520504686.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:47.180Z,1520504687.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T10:24:47.197Z,1520504687.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:47.575Z,1520504687.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T10:24:47.576Z,1520504687.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:47.970Z,1520504687.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T10:24:47.971Z,1520504687.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:48.370Z,1520504688.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T10:24:48.371Z,1520504688.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:48.766Z,1520504688.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T10:24:48.767Z,1520504688.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:49.171Z,1520504689.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T10:24:49.171Z,1520504689.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:49.573Z,1520504689.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T10:24:49.575Z,1520504689.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:49.982Z,1520504689.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T10:24:49.983Z,1520504689.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:50.374Z,1520504690.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T10:24:50.375Z,1520504690.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:50.769Z,1520504690.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T10:24:50.770Z,1520504690.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:51.179Z,1520504691.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T10:24:51.181Z,1520504691.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:51.571Z,1520504691.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T10:24:51.572Z,1520504691.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:51.978Z,1520504691.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T10:24:51.979Z,1520504691.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:52.368Z,1520504692.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:52.763Z,1520504692.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:53.175Z,1520504693.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:53.576Z,1520504693.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:53.975Z,1520504693.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:54.371Z,1520504694.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:54.771Z,1520504694.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:55.176Z,1520504695.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:55.578Z,1520504695.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:55.981Z,1520504695.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:56.367Z,1520504696.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:56.770Z,1520504696.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:57.177Z,1520504697.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:57.581Z,1520504697.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:57.975Z,1520504697.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:58.378Z,1520504698.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:58.765Z,1520504698.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:59.182Z,1520504699.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:59.577Z,1520504699.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:24:59.982Z,1520504699.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:00.370Z,1520504700.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:00.767Z,1520504700.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:01.178Z,1520504701.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:01.579Z,1520504701.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:01.991Z,1520504701.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:02.373Z,1520504702.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:02.770Z,1520504702.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:03.188Z,1520504703.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:03.586Z,1520504703.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:03.987Z,1520504703.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:04.371Z,1520504704.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:04.769Z,1520504704.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:05.177Z,1520504705.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:05.587Z,1520504705.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:05.986Z,1520504705.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:06.375Z,1520504706.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:06.776Z,1520504706.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:07.187Z,1520504707.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:07.586Z,1520504707.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:07.990Z,1520504707.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:08.373Z,1520504708.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:08.781Z,1520504708.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:09.186Z,1520504709.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:09.577Z,1520504709.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:09.977Z,1520504709.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:10.378Z,1520504710.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:10.774Z,1520504710.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:11.186Z,1520504711.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:11.595Z,1520504711.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:11.986Z,1520504711.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:12.376Z,1520504712.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:12.770Z,1520504712.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:13.181Z,1520504713.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:13.587Z,1520504713.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:13.982Z,1520504713.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:14.375Z,1520504714.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:14.774Z,1520504714.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:15.189Z,1520504715.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:15.588Z,1520504715.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:15.986Z,1520504715.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:16.366Z,1520504716.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:16.759Z,1520504716.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:17.185Z,1520504717.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:17.591Z,1520504717.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:17.993Z,1520504717.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:18.364Z,1520504718.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:18.765Z,1520504718.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:19.176Z,1520504719.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:19.580Z,1520504719.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:19.984Z,1520504719.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:20.378Z,1520504720.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:20.770Z,1520504720.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:21.176Z,1520504721.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:21.602Z,1520504721.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:21.975Z,1520504721.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:22.371Z,1520504722.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:22.766Z,1520504722.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:23.202Z,1520504723.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:23.575Z,1520504723.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:23.983Z,1520504723.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:24.370Z,1520504724.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:24.771Z,1520504724.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:25.176Z,1520504725.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:25.576Z,1520504725.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:25.982Z,1520504725.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:26.368Z,1520504726.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:26.770Z,1520504726.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:27.182Z,1520504727.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:27.575Z,1520504727.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:27.986Z,1520504727.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:28.371Z,1520504728.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:28.770Z,1520504728.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:29.175Z,1520504729.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:29.579Z,1520504729.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:29.976Z,1520504729.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:30.368Z,1520504730.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:30.773Z,1520504730.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:31.188Z,1520504731.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:31.579Z,1520504731.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:31.980Z,1520504731.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:32.371Z,1520504732.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:32.784Z,1520504732.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:33.186Z,1520504733.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:33.579Z,1520504733.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:33.979Z,1520504733.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:34.371Z,1520504734.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:34.771Z,1520504734.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:35.175Z,1520504735.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:35.579Z,1520504735.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:35.984Z,1520504735.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:36.370Z,1520504736.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:36.767Z,1520504736.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:37.179Z,1520504737.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:37.584Z,1520504737.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:37.986Z,1520504737.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:38.369Z,1520504738.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:38.767Z,1520504738.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:39.180Z,1520504739.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:39.579Z,1520504739.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:39.975Z,1520504739.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:40.373Z,1520504740.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:40.376Z,1520504740.376 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T10:25:40.376Z,1520504740.376 [Default:CheckIn:C.Wait] Stopped
2018-03-08T10:25:40.376Z,1520504740.376 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T10:25:40.377Z,1520504740.377 [Default:CheckIn:D] Running Loop=1
2018-03-08T10:25:40.770Z,1520504740.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:40.774Z,1520504740.774 [Default:CheckIn:D] Stopped
2018-03-08T10:25:40.774Z,1520504740.774 [Default:CheckIn:E] Running Loop=1
2018-03-08T10:25:41.184Z,1520504741.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:41.191Z,1520504741.191 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 159.932813 min 
2018-03-08T10:25:41.191Z,1520504741.191 [Default:CheckIn:E] Stopped
2018-03-08T10:25:41.191Z,1520504741.191 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T10:25:41.192Z,1520504741.192 [Default:CheckIn] Stopped
2018-03-08T10:25:41.192Z,1520504741.192 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T10:25:41.192Z,1520504741.192 [Default:CheckIn](INFO): Running loop #16
2018-03-08T10:25:41.192Z,1520504741.192 [Default:CheckIn] Running Loop=16
2018-03-08T10:25:41.192Z,1520504741.192 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T10:25:41.192Z,1520504741.192 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T10:25:41.578Z,1520504741.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:44.680Z,1520504744.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:44.818Z,1520504744.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:45.170Z,1520504745.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:45.547Z,1520504745.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:45.947Z,1520504745.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:46.375Z,1520504746.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:46.765Z,1520504746.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:47.182Z,1520504747.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:47.578Z,1520504747.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:47.951Z,1520504747.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:48.358Z,1520504748.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:48.758Z,1520504748.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:49.162Z,1520504749.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:49.566Z,1520504749.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:49.960Z,1520504749.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:50.351Z,1520504750.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:50.760Z,1520504750.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:51.160Z,1520504751.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:51.559Z,1520504751.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:51.960Z,1520504751.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:52.358Z,1520504752.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:52.754Z,1520504752.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:53.160Z,1520504753.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:53.559Z,1520504753.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:53.966Z,1520504753.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:54.354Z,1520504754.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:54.754Z,1520504754.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:55.171Z,1520504755.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:55.563Z,1520504755.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:55.964Z,1520504755.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:56.355Z,1520504756.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:56.758Z,1520504756.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:57.163Z,1520504757.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:57.563Z,1520504757.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:57.964Z,1520504757.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:58.354Z,1520504758.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:58.755Z,1520504758.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:59.164Z,1520504759.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:59.570Z,1520504759.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:25:59.963Z,1520504759.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:00.358Z,1520504760.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:00.758Z,1520504760.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:01.161Z,1520504761.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:01.561Z,1520504761.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:01.963Z,1520504761.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:02.355Z,1520504762.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:02.755Z,1520504762.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:03.160Z,1520504763.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:03.563Z,1520504763.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:03.963Z,1520504763.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:04.356Z,1520504764.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:04.755Z,1520504764.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:05.163Z,1520504765.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:05.564Z,1520504765.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:05.965Z,1520504765.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:06.355Z,1520504766.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:06.757Z,1520504766.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:07.161Z,1520504767.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:07.569Z,1520504767.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:07.964Z,1520504767.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:08.354Z,1520504768.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:08.762Z,1520504768.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:09.160Z,1520504769.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:09.570Z,1520504769.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:09.964Z,1520504769.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:10.355Z,1520504770.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:10.758Z,1520504770.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:11.165Z,1520504771.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:11.564Z,1520504771.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:11.970Z,1520504771.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:12.355Z,1520504772.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:12.751Z,1520504772.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:13.159Z,1520504773.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:13.575Z,1520504773.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:13.968Z,1520504773.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:14.370Z,1520504774.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:14.743Z,1520504774.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:15.155Z,1520504775.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:15.560Z,1520504775.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:15.957Z,1520504775.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:16.363Z,1520504776.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:16.754Z,1520504776.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:17.166Z,1520504777.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:17.566Z,1520504777.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:17.970Z,1520504777.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:18.355Z,1520504778.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:18.754Z,1520504778.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:19.162Z,1520504779.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:19.564Z,1520504779.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:19.970Z,1520504779.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:20.349Z,1520504780.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:20.762Z,1520504780.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:21.163Z,1520504781.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:21.564Z,1520504781.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:21.970Z,1520504781.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:22.355Z,1520504782.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:22.757Z,1520504782.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:23.165Z,1520504783.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:23.564Z,1520504783.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:23.966Z,1520504783.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:24.363Z,1520504784.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:24.752Z,1520504784.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:25.165Z,1520504785.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:25.561Z,1520504785.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:25.969Z,1520504785.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:26.357Z,1520504786.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:26.751Z,1520504786.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:27.166Z,1520504787.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:27.564Z,1520504787.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:27.970Z,1520504787.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:28.359Z,1520504788.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:28.762Z,1520504788.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:29.165Z,1520504789.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:29.565Z,1520504789.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:29.965Z,1520504789.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:30.355Z,1520504790.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:30.751Z,1520504790.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:31.161Z,1520504791.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:31.561Z,1520504791.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:31.970Z,1520504791.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:32.355Z,1520504792.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:32.749Z,1520504792.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:33.174Z,1520504793.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:33.569Z,1520504793.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:33.956Z,1520504793.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:34.352Z,1520504794.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:34.752Z,1520504794.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:35.162Z,1520504795.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:35.570Z,1520504795.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:35.974Z,1520504795.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:36.365Z,1520504796.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:36.761Z,1520504796.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:37.166Z,1520504797.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:37.567Z,1520504797.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:37.970Z,1520504797.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:38.365Z,1520504798.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:38.761Z,1520504798.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:39.169Z,1520504799.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:39.567Z,1520504799.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:39.969Z,1520504799.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:40.362Z,1520504800.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:40.765Z,1520504800.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:41.170Z,1520504801.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:41.570Z,1520504801.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:41.968Z,1520504801.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:45.059Z,1520504805.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:45.205Z,1520504805.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:45.536Z,1520504805.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:45.960Z,1520504805.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:46.336Z,1520504806.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:46.731Z,1520504806.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:47.130Z,1520504807.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:47.531Z,1520504807.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:47.934Z,1520504807.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:48.344Z,1520504808.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:48.744Z,1520504808.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:49.136Z,1520504809.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:49.526Z,1520504809.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:49.931Z,1520504809.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:50.333Z,1520504810.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:50.733Z,1520504810.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:51.137Z,1520504811.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:51.536Z,1520504811.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:51.942Z,1520504811.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:52.331Z,1520504812.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:52.732Z,1520504812.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:53.130Z,1520504813.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:53.537Z,1520504813.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:53.940Z,1520504813.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:54.342Z,1520504814.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:54.734Z,1520504814.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:55.132Z,1520504815.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:55.535Z,1520504815.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:55.932Z,1520504815.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:56.348Z,1520504816.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:56.741Z,1520504816.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:57.140Z,1520504817.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:57.535Z,1520504817.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:57.936Z,1520504817.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:58.332Z,1520504818.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:58.736Z,1520504818.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:59.137Z,1520504819.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:59.550Z,1520504819.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:26:59.951Z,1520504819.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:00.347Z,1520504820.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:00.735Z,1520504820.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:01.138Z,1520504821.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:01.540Z,1520504821.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:01.937Z,1520504821.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:02.342Z,1520504822.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:02.750Z,1520504822.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:03.147Z,1520504823.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:03.554Z,1520504823.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:03.944Z,1520504823.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:04.337Z,1520504824.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:04.731Z,1520504824.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:05.145Z,1520504825.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:05.539Z,1520504825.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:05.940Z,1520504825.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:06.339Z,1520504826.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:06.728Z,1520504826.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:07.137Z,1520504827.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:07.552Z,1520504827.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:07.954Z,1520504827.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:08.344Z,1520504828.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:08.738Z,1520504828.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:09.136Z,1520504829.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:09.537Z,1520504829.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:09.938Z,1520504829.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:10.345Z,1520504830.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:10.745Z,1520504830.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:11.145Z,1520504831.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:11.531Z,1520504831.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:11.942Z,1520504831.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:12.345Z,1520504832.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:12.716Z,1520504832.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:13.142Z,1520504833.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:13.490Z,1520504833.490 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T10:27:13.490Z,1520504833.490 [NAL9602] Data Fault, FailCount= 1
2018-03-08T10:27:13.490Z,1520504833.490 [NAL9602](ERROR): Data Fault
2018-03-08T10:27:13.526Z,1520504833.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:13.580Z,1520504833.580 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T10:27:13.899Z,1520504833.899 [NAL9602](INFO): Powering down
2018-03-08T10:27:13.955Z,1520504833.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:14.329Z,1520504834.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:14.730Z,1520504834.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:14.770Z,1520504834.770 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T10:27:14.770Z,1520504834.770 [NAL9602] No Fault, FailCount= 1
2018-03-08T10:27:15.130Z,1520504835.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:15.534Z,1520504835.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:15.930Z,1520504835.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:16.328Z,1520504836.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:16.731Z,1520504836.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:17.130Z,1520504837.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:17.523Z,1520504837.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:17.930Z,1520504837.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:18.330Z,1520504838.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:18.723Z,1520504838.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:19.130Z,1520504839.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:19.530Z,1520504839.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:19.930Z,1520504839.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:20.333Z,1520504840.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:20.734Z,1520504840.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:21.132Z,1520504841.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:21.534Z,1520504841.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:21.928Z,1520504841.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:22.333Z,1520504842.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:22.734Z,1520504842.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:23.132Z,1520504843.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:23.528Z,1520504843.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:23.929Z,1520504843.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:24.325Z,1520504844.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:24.727Z,1520504844.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:25.139Z,1520504845.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:25.533Z,1520504845.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:25.929Z,1520504845.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:26.338Z,1520504846.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:26.763Z,1520504846.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:27.133Z,1520504847.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:27.612Z,1520504847.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:27.932Z,1520504847.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:28.324Z,1520504848.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:28.731Z,1520504848.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:29.125Z,1520504849.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:29.521Z,1520504849.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:29.923Z,1520504849.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:30.352Z,1520504850.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:30.721Z,1520504850.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:31.123Z,1520504851.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:31.528Z,1520504851.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:31.934Z,1520504851.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:32.334Z,1520504852.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:32.732Z,1520504852.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:33.135Z,1520504853.135 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:33.135Z,1520504853.135 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55
2018-03-08T10:27:33.135Z,1520504853.135 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T10:27:33.137Z,1520504853.137 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:33.137Z,1520504853.137 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55
2018-03-08T10:27:33.137Z,1520504853.137 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T10:27:33.139Z,1520504853.139 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:33.139Z,1520504853.139 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 55
2018-03-08T10:27:33.139Z,1520504853.139 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T10:27:33.163Z,1520504853.163 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T10:27:33.164Z,1520504853.164 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T10:27:33.164Z,1520504853.164 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T10:27:33.569Z,1520504853.569 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T10:27:33.569Z,1520504853.569 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55
2018-03-08T10:27:33.570Z,1520504853.570 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T10:27:33.570Z,1520504853.570 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55
2018-03-08T10:27:33.570Z,1520504853.570 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T10:27:33.571Z,1520504853.571 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 55
2018-03-08T10:27:33.929Z,1520504853.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T10:27:33.929Z,1520504853.929 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:27:33.929Z,1520504853.929 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:27:33.930Z,1520504853.930 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T10:27:33.930Z,1520504853.930 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:27:33.930Z,1520504853.930 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:27:33.931Z,1520504853.931 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T10:27:33.931Z,1520504853.931 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:27:33.932Z,1520504853.932 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:27:34.330Z,1520504854.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T10:27:34.331Z,1520504854.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:34.738Z,1520504854.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T10:27:34.739Z,1520504854.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:35.134Z,1520504855.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T10:27:35.135Z,1520504855.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:35.531Z,1520504855.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T10:27:35.532Z,1520504855.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:35.943Z,1520504855.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T10:27:35.943Z,1520504855.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:36.334Z,1520504856.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T10:27:36.335Z,1520504856.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:36.734Z,1520504856.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T10:27:36.735Z,1520504856.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:37.138Z,1520504857.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T10:27:37.139Z,1520504857.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:37.534Z,1520504857.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T10:27:37.535Z,1520504857.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:37.935Z,1520504857.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T10:27:37.936Z,1520504857.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:38.331Z,1520504858.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T10:27:38.332Z,1520504858.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:38.730Z,1520504858.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T10:27:38.730Z,1520504858.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:39.135Z,1520504859.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T10:27:39.136Z,1520504859.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:39.534Z,1520504859.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T10:27:39.535Z,1520504859.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:39.934Z,1520504859.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T10:27:39.935Z,1520504859.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:40.333Z,1520504860.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T10:27:40.334Z,1520504860.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:40.734Z,1520504860.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T10:27:40.735Z,1520504860.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:41.128Z,1520504861.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T10:27:41.129Z,1520504861.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:41.534Z,1520504861.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T10:27:41.535Z,1520504861.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:41.934Z,1520504861.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T10:27:41.935Z,1520504861.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:42.332Z,1520504862.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T10:27:42.333Z,1520504862.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:45.393Z,1520504865.393 [NAL9602](INFO): Powering up NAL9602
2018-03-08T10:27:45.434Z,1520504865.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2018-03-08T10:27:45.435Z,1520504865.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:45.580Z,1520504865.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T10:27:45.582Z,1520504865.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:45.910Z,1520504865.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T10:27:45.911Z,1520504865.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:46.306Z,1520504866.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T10:27:46.307Z,1520504866.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:46.703Z,1520504866.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T10:27:46.704Z,1520504866.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:47.110Z,1520504867.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T10:27:47.111Z,1520504867.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:47.504Z,1520504867.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T10:27:47.505Z,1520504867.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:47.906Z,1520504867.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T10:27:47.907Z,1520504867.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:48.310Z,1520504868.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T10:27:48.311Z,1520504868.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:48.710Z,1520504868.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T10:27:48.711Z,1520504868.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:49.103Z,1520504869.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T10:27:49.104Z,1520504869.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:49.507Z,1520504869.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T10:27:49.508Z,1520504869.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:49.905Z,1520504869.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T10:27:49.906Z,1520504869.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:50.301Z,1520504870.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T10:27:50.302Z,1520504870.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:50.704Z,1520504870.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T10:27:50.705Z,1520504870.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:51.100Z,1520504871.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T10:27:51.101Z,1520504871.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:51.502Z,1520504871.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T10:27:51.503Z,1520504871.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:51.910Z,1520504871.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T10:27:51.911Z,1520504871.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:52.305Z,1520504872.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T10:27:52.306Z,1520504872.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:52.700Z,1520504872.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T10:27:52.701Z,1520504872.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:53.110Z,1520504873.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T10:27:53.111Z,1520504873.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:53.506Z,1520504873.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:53.906Z,1520504873.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:54.307Z,1520504874.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:54.706Z,1520504874.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:55.103Z,1520504875.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:55.507Z,1520504875.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:55.935Z,1520504875.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:56.262Z,1520504876.262 [NAL9602](INFO): NAL9602 initialized
2018-03-08T10:27:56.308Z,1520504876.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:56.707Z,1520504876.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:57.135Z,1520504877.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:57.508Z,1520504877.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:57.935Z,1520504877.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:58.302Z,1520504878.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:58.702Z,1520504878.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:59.107Z,1520504879.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:59.535Z,1520504879.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:27:59.908Z,1520504879.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:00.336Z,1520504880.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:00.707Z,1520504880.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:01.107Z,1520504881.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:01.508Z,1520504881.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:01.905Z,1520504881.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:02.307Z,1520504882.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:02.735Z,1520504882.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:03.108Z,1520504883.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:03.507Z,1520504883.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:03.907Z,1520504883.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:04.306Z,1520504884.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:04.709Z,1520504884.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:05.107Z,1520504885.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:05.535Z,1520504885.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:05.934Z,1520504885.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:06.313Z,1520504886.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:06.708Z,1520504886.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:07.108Z,1520504887.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:07.508Z,1520504887.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:07.909Z,1520504887.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:08.309Z,1520504888.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:08.736Z,1520504888.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:09.136Z,1520504889.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:09.505Z,1520504889.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:09.908Z,1520504889.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:10.308Z,1520504890.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:10.709Z,1520504890.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:11.107Z,1520504891.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:11.513Z,1520504891.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:11.935Z,1520504891.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:12.331Z,1520504892.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:12.715Z,1520504892.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:13.109Z,1520504893.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:13.511Z,1520504893.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:13.915Z,1520504893.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:14.313Z,1520504894.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:14.716Z,1520504894.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:15.113Z,1520504895.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:15.510Z,1520504895.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:15.906Z,1520504895.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:16.302Z,1520504896.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:16.702Z,1520504896.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:17.111Z,1520504897.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:17.514Z,1520504897.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:17.912Z,1520504897.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:18.312Z,1520504898.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:18.709Z,1520504898.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:19.101Z,1520504899.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:19.506Z,1520504899.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:19.909Z,1520504899.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:20.312Z,1520504900.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:20.715Z,1520504900.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:21.111Z,1520504901.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:21.508Z,1520504901.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:21.906Z,1520504901.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:22.310Z,1520504902.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:22.710Z,1520504902.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:23.111Z,1520504903.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:23.513Z,1520504903.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:23.915Z,1520504903.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:24.322Z,1520504904.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:24.709Z,1520504904.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:25.109Z,1520504905.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:25.507Z,1520504905.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:25.915Z,1520504905.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:26.313Z,1520504906.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:26.715Z,1520504906.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:27.114Z,1520504907.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:27.501Z,1520504907.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:27.907Z,1520504907.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:28.309Z,1520504908.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:28.709Z,1520504908.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:29.106Z,1520504909.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:29.513Z,1520504909.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:29.911Z,1520504909.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:30.312Z,1520504910.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:30.708Z,1520504910.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:31.102Z,1520504911.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:31.514Z,1520504911.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:31.910Z,1520504911.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:32.313Z,1520504912.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:32.714Z,1520504912.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:33.113Z,1520504913.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:33.509Z,1520504913.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:33.914Z,1520504913.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:34.309Z,1520504914.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:34.710Z,1520504914.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:35.109Z,1520504915.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:35.519Z,1520504915.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:35.916Z,1520504915.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:36.318Z,1520504916.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:36.714Z,1520504916.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:37.109Z,1520504917.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:37.507Z,1520504917.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:37.909Z,1520504917.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:38.312Z,1520504918.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:38.718Z,1520504918.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:39.119Z,1520504919.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:39.508Z,1520504919.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:39.906Z,1520504919.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:40.315Z,1520504920.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:40.709Z,1520504920.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:41.106Z,1520504921.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:41.514Z,1520504921.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:41.916Z,1520504921.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:42.322Z,1520504922.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:42.710Z,1520504922.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:45.851Z,1520504925.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:45.998Z,1520504925.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:46.344Z,1520504926.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:46.742Z,1520504926.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:47.140Z,1520504927.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:47.543Z,1520504927.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:47.917Z,1520504927.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:48.316Z,1520504928.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:48.723Z,1520504928.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:49.121Z,1520504929.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:49.525Z,1520504929.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:49.943Z,1520504929.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:50.348Z,1520504930.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:50.720Z,1520504930.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:51.125Z,1520504931.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:51.524Z,1520504931.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:51.919Z,1520504931.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:52.354Z,1520504932.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:52.740Z,1520504932.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:53.148Z,1520504933.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:53.519Z,1520504933.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:53.924Z,1520504933.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:54.320Z,1520504934.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:54.724Z,1520504934.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:55.123Z,1520504935.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:55.525Z,1520504935.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:55.950Z,1520504935.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:56.330Z,1520504936.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:56.717Z,1520504936.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:57.123Z,1520504937.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:57.523Z,1520504937.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:57.919Z,1520504937.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:58.349Z,1520504938.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:58.726Z,1520504938.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:59.124Z,1520504939.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:59.523Z,1520504939.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:28:59.922Z,1520504939.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:00.323Z,1520504940.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:00.725Z,1520504940.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:01.122Z,1520504941.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:01.530Z,1520504941.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:01.950Z,1520504941.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:02.350Z,1520504942.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:02.716Z,1520504942.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:03.121Z,1520504943.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:03.523Z,1520504943.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:03.919Z,1520504943.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:04.325Z,1520504944.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:04.754Z,1520504944.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:05.130Z,1520504945.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:05.523Z,1520504945.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:05.922Z,1520504945.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:06.323Z,1520504946.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:06.722Z,1520504946.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:07.122Z,1520504947.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:07.524Z,1520504947.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:07.950Z,1520504947.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:08.350Z,1520504948.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:08.715Z,1520504948.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:09.123Z,1520504949.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:09.531Z,1520504949.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:09.930Z,1520504949.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:10.325Z,1520504950.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:10.752Z,1520504950.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:11.130Z,1520504951.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:11.523Z,1520504951.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:11.924Z,1520504951.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:12.324Z,1520504952.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:12.723Z,1520504952.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:13.123Z,1520504953.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:13.523Z,1520504953.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:13.950Z,1520504953.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:14.329Z,1520504954.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:14.723Z,1520504954.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:15.130Z,1520504955.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:15.524Z,1520504955.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:15.921Z,1520504955.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:16.331Z,1520504956.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:16.732Z,1520504956.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:17.129Z,1520504957.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:17.522Z,1520504957.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:17.926Z,1520504957.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:18.322Z,1520504958.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:18.724Z,1520504958.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:19.126Z,1520504959.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:19.531Z,1520504959.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:19.932Z,1520504959.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:20.338Z,1520504960.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:20.726Z,1520504960.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:21.122Z,1520504961.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:21.523Z,1520504961.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:21.921Z,1520504961.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:22.333Z,1520504962.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:22.732Z,1520504962.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:23.131Z,1520504963.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:23.530Z,1520504963.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:23.928Z,1520504963.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:24.320Z,1520504964.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:24.726Z,1520504964.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:25.127Z,1520504965.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:25.528Z,1520504965.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:25.932Z,1520504965.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:26.338Z,1520504966.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:26.733Z,1520504966.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:27.128Z,1520504967.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:27.535Z,1520504967.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:27.928Z,1520504967.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:28.335Z,1520504968.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:28.744Z,1520504968.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:29.138Z,1520504969.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:29.539Z,1520504969.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:29.930Z,1520504969.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:30.330Z,1520504970.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:30.730Z,1520504970.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:31.131Z,1520504971.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:31.536Z,1520504971.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:31.941Z,1520504971.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:32.337Z,1520504972.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:32.729Z,1520504972.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:33.131Z,1520504973.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:33.535Z,1520504973.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:33.933Z,1520504973.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:34.346Z,1520504974.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:34.735Z,1520504974.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:35.138Z,1520504975.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:35.534Z,1520504975.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:35.929Z,1520504975.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:36.340Z,1520504976.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:36.742Z,1520504976.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:37.121Z,1520504977.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:37.549Z,1520504977.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:37.949Z,1520504977.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:38.350Z,1520504978.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:38.715Z,1520504978.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:39.122Z,1520504979.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:39.522Z,1520504979.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:39.915Z,1520504979.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:40.348Z,1520504980.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:40.750Z,1520504980.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:41.148Z,1520504981.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:41.522Z,1520504981.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:41.921Z,1520504981.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:42.322Z,1520504982.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:42.723Z,1520504982.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:45.847Z,1520504985.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:45.998Z,1520504985.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:46.344Z,1520504986.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:46.726Z,1520504986.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:47.123Z,1520504987.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:47.519Z,1520504987.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:47.919Z,1520504987.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:48.346Z,1520504988.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:48.745Z,1520504988.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:49.146Z,1520504989.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:49.517Z,1520504989.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:49.918Z,1520504989.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:50.318Z,1520504990.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:50.720Z,1520504990.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:51.119Z,1520504991.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:51.547Z,1520504991.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:51.924Z,1520504991.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:52.346Z,1520504992.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:52.719Z,1520504992.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:53.126Z,1520504993.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:53.520Z,1520504993.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:53.918Z,1520504993.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:54.346Z,1520504994.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:54.746Z,1520504994.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:55.120Z,1520504995.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:55.519Z,1520504995.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:55.917Z,1520504995.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:56.319Z,1520504996.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:56.719Z,1520504996.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:57.119Z,1520504997.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:57.548Z,1520504997.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:57.946Z,1520504997.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:58.321Z,1520504998.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:58.719Z,1520504998.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:59.119Z,1520504999.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:59.520Z,1520504999.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:29:59.919Z,1520504999.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:00.346Z,1520505000.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:00.746Z,1520505000.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:01.148Z,1520505001.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:01.523Z,1520505001.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:01.919Z,1520505001.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:02.320Z,1520505002.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:02.720Z,1520505002.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:03.119Z,1520505003.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:03.549Z,1520505003.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:03.920Z,1520505003.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:04.326Z,1520505004.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:04.717Z,1520505004.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:05.115Z,1520505005.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:05.520Z,1520505005.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:05.919Z,1520505005.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:06.346Z,1520505006.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:06.746Z,1520505006.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:07.149Z,1520505007.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:07.515Z,1520505007.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:07.927Z,1520505007.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:08.319Z,1520505008.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:08.721Z,1520505008.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:09.122Z,1520505009.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:09.524Z,1520505009.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:09.928Z,1520505009.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:10.324Z,1520505010.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:10.721Z,1520505010.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:11.126Z,1520505011.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:11.520Z,1520505011.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:11.923Z,1520505011.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:12.324Z,1520505012.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:12.728Z,1520505012.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:13.125Z,1520505013.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:13.515Z,1520505013.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:13.927Z,1520505013.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:14.323Z,1520505014.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:14.715Z,1520505014.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:15.132Z,1520505015.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:15.534Z,1520505015.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:15.942Z,1520505015.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:16.335Z,1520505016.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:16.722Z,1520505016.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:17.130Z,1520505017.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:17.515Z,1520505017.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:17.918Z,1520505017.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:18.343Z,1520505018.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:18.744Z,1520505018.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:19.124Z,1520505019.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:19.514Z,1520505019.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:19.922Z,1520505019.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:20.317Z,1520505020.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:20.716Z,1520505020.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:21.119Z,1520505021.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:21.550Z,1520505021.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:21.928Z,1520505021.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:22.332Z,1520505022.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:22.722Z,1520505022.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:23.121Z,1520505023.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:23.522Z,1520505023.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:23.921Z,1520505023.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:24.325Z,1520505024.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:24.724Z,1520505024.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:25.124Z,1520505025.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:25.513Z,1520505025.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:25.945Z,1520505025.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:26.326Z,1520505026.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:26.727Z,1520505026.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:27.126Z,1520505027.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:27.538Z,1520505027.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:27.934Z,1520505027.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:28.331Z,1520505028.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:28.723Z,1520505028.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:29.126Z,1520505029.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:29.523Z,1520505029.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:29.919Z,1520505029.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:30.338Z,1520505030.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:30.731Z,1520505030.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:31.132Z,1520505031.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:31.516Z,1520505031.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:31.919Z,1520505031.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:32.319Z,1520505032.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:32.725Z,1520505032.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:33.119Z,1520505033.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:33.529Z,1520505033.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:33.931Z,1520505033.931 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:33.931Z,1520505033.931 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56
2018-03-08T10:30:33.931Z,1520505033.931 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T10:30:33.933Z,1520505033.933 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:33.933Z,1520505033.933 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56
2018-03-08T10:30:33.933Z,1520505033.933 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T10:30:33.935Z,1520505033.935 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:33.935Z,1520505033.935 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 56
2018-03-08T10:30:33.935Z,1520505033.935 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T10:30:33.963Z,1520505033.963 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T10:30:33.963Z,1520505033.963 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T10:30:33.963Z,1520505033.963 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T10:30:34.347Z,1520505034.347 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T10:30:34.347Z,1520505034.347 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56
2018-03-08T10:30:34.347Z,1520505034.347 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T10:30:34.348Z,1520505034.348 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56
2018-03-08T10:30:34.348Z,1520505034.348 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T10:30:34.348Z,1520505034.348 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 56
2018-03-08T10:30:34.726Z,1520505034.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T10:30:34.726Z,1520505034.726 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:30:34.727Z,1520505034.727 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:30:34.727Z,1520505034.727 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T10:30:34.728Z,1520505034.728 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:30:34.728Z,1520505034.728 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:30:34.728Z,1520505034.728 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T10:30:34.729Z,1520505034.729 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:30:34.729Z,1520505034.729 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:30:35.118Z,1520505035.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T10:30:35.119Z,1520505035.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:35.528Z,1520505035.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T10:30:35.529Z,1520505035.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:35.906Z,1520505035.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T10:30:35.907Z,1520505035.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:36.338Z,1520505036.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T10:30:36.339Z,1520505036.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:36.741Z,1520505036.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T10:30:36.742Z,1520505036.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:37.136Z,1520505037.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T10:30:37.137Z,1520505037.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:37.507Z,1520505037.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T10:30:37.508Z,1520505037.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:37.934Z,1520505037.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T10:30:37.935Z,1520505037.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:38.317Z,1520505038.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T10:30:38.318Z,1520505038.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:38.712Z,1520505038.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T10:30:38.713Z,1520505038.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:39.119Z,1520505039.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T10:30:39.120Z,1520505039.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:39.546Z,1520505039.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T10:30:39.547Z,1520505039.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:39.944Z,1520505039.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T10:30:39.945Z,1520505039.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:40.340Z,1520505040.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T10:30:40.341Z,1520505040.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:40.721Z,1520505040.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T10:30:40.722Z,1520505040.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:41.114Z,1520505041.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T10:30:41.115Z,1520505041.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:41.522Z,1520505041.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T10:30:41.523Z,1520505041.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:41.542Z,1520505041.542 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T10:25:41.2Z
2018-03-08T10:30:41.542Z,1520505041.542 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T10:30:41.542Z,1520505041.542 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T10:30:41.918Z,1520505041.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T10:30:41.919Z,1520505041.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:42.423Z,1520505042.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-08T10:30:42.424Z,1520505042.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:42.757Z,1520505042.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T10:30:42.758Z,1520505042.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:45.886Z,1520505045.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T10:30:45.887Z,1520505045.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:46.012Z,1520505046.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T10:30:46.013Z,1520505046.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:46.353Z,1520505046.353 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0064.lzma
2018-03-08T10:30:46.409Z,1520505046.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T10:30:46.410Z,1520505046.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:46.786Z,1520505046.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-08T10:30:46.787Z,1520505046.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:47.143Z,1520505047.143 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0064.lzma.bak
2018-03-08T10:30:47.143Z,1520505047.143 [DataOverHttps](INFO): SBD MOMSN=7984867
2018-03-08T10:30:47.210Z,1520505047.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-08T10:30:47.211Z,1520505047.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:47.778Z,1520505047.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2018-03-08T10:30:47.779Z,1520505047.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:48.018Z,1520505048.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-08T10:30:48.019Z,1520505048.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:51.089Z,1520505051.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T10:30:51.090Z,1520505051.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:51.206Z,1520505051.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-08T10:30:51.207Z,1520505051.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:51.586Z,1520505051.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T10:30:51.587Z,1520505051.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:51.980Z,1520505051.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T10:30:51.981Z,1520505051.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:52.383Z,1520505052.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-08T10:30:52.384Z,1520505052.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:52.756Z,1520505052.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T10:30:52.757Z,1520505052.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:53.154Z,1520505053.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T10:30:53.155Z,1520505053.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:56.261Z,1520505056.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:56.399Z,1520505056.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:56.713Z,1520505056.713 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0065.lzma
2018-03-08T10:30:56.791Z,1520505056.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:57.159Z,1520505057.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:57.511Z,1520505057.511 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0065.lzma.bak
2018-03-08T10:30:57.511Z,1520505057.511 [DataOverHttps](INFO): SBD MOMSN=7984871
2018-03-08T10:30:57.592Z,1520505057.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:58.192Z,1520505058.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:58.194Z,1520505058.194 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T10:30:58.195Z,1520505058.195 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T10:30:58.195Z,1520505058.195 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T10:30:58.371Z,1520505058.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:30:58.763Z,1520505058.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:01.856Z,1520505061.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:01.998Z,1520505061.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:02.347Z,1520505062.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:02.758Z,1520505062.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:03.139Z,1520505063.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:03.539Z,1520505063.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:03.942Z,1520505063.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:04.344Z,1520505064.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:04.751Z,1520505064.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:05.144Z,1520505065.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:05.518Z,1520505065.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:05.921Z,1520505065.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:06.318Z,1520505066.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:06.746Z,1520505066.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:07.146Z,1520505067.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:07.551Z,1520505067.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:07.949Z,1520505067.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:08.361Z,1520505068.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:08.725Z,1520505068.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:09.131Z,1520505069.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:09.534Z,1520505069.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:09.927Z,1520505069.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:10.327Z,1520505070.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:10.756Z,1520505070.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:11.157Z,1520505071.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:11.526Z,1520505071.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:11.927Z,1520505071.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:12.326Z,1520505072.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:12.725Z,1520505072.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:13.130Z,1520505073.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:13.532Z,1520505073.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:13.955Z,1520505073.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:14.328Z,1520505074.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:14.727Z,1520505074.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:15.131Z,1520505075.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:15.525Z,1520505075.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:15.926Z,1520505075.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:16.332Z,1520505076.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:16.740Z,1520505076.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:17.138Z,1520505077.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:17.522Z,1520505077.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:17.925Z,1520505077.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:18.322Z,1520505078.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:18.725Z,1520505078.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:19.126Z,1520505079.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:19.538Z,1520505079.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:19.932Z,1520505079.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:20.344Z,1520505080.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:20.729Z,1520505080.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:21.131Z,1520505081.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:21.531Z,1520505081.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:21.929Z,1520505081.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:22.337Z,1520505082.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:22.733Z,1520505082.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:23.133Z,1520505083.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:23.527Z,1520505083.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:23.929Z,1520505083.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:24.330Z,1520505084.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:24.724Z,1520505084.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:25.134Z,1520505085.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:25.533Z,1520505085.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:25.936Z,1520505085.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:26.332Z,1520505086.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:26.729Z,1520505086.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:27.122Z,1520505087.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:27.526Z,1520505087.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:27.926Z,1520505087.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:28.332Z,1520505088.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:28.732Z,1520505088.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:29.132Z,1520505089.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:29.529Z,1520505089.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:29.934Z,1520505089.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:30.330Z,1520505090.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:30.734Z,1520505090.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:31.134Z,1520505091.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:31.536Z,1520505091.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:31.935Z,1520505091.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:32.336Z,1520505092.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:32.731Z,1520505092.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:33.132Z,1520505093.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:33.531Z,1520505093.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:33.927Z,1520505093.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:34.333Z,1520505094.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:34.742Z,1520505094.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:35.137Z,1520505095.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:35.525Z,1520505095.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:35.938Z,1520505095.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:36.327Z,1520505096.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:36.724Z,1520505096.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:37.125Z,1520505097.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:37.535Z,1520505097.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:37.936Z,1520505097.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:38.335Z,1520505098.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:38.731Z,1520505098.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:39.134Z,1520505099.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:39.533Z,1520505099.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:39.931Z,1520505099.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:40.340Z,1520505100.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:40.736Z,1520505100.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:41.149Z,1520505101.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:41.537Z,1520505101.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:41.933Z,1520505101.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:42.338Z,1520505102.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:42.733Z,1520505102.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:43.135Z,1520505103.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:43.544Z,1520505103.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:43.939Z,1520505103.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:43.953Z,1520505103.953 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T10:31:44.339Z,1520505104.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:44.735Z,1520505104.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:45.131Z,1520505105.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:45.537Z,1520505105.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:45.938Z,1520505105.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:46.338Z,1520505106.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:46.748Z,1520505106.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:47.159Z,1520505107.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:47.513Z,1520505107.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:47.945Z,1520505107.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:48.347Z,1520505108.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:48.716Z,1520505108.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:49.142Z,1520505109.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:49.554Z,1520505109.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:49.949Z,1520505109.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:50.353Z,1520505110.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:50.730Z,1520505110.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:51.123Z,1520505111.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:51.534Z,1520505111.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:51.927Z,1520505111.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:52.329Z,1520505112.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:52.732Z,1520505112.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:53.133Z,1520505113.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:53.526Z,1520505113.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:53.924Z,1520505113.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:54.328Z,1520505114.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:54.726Z,1520505114.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:55.127Z,1520505115.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:55.557Z,1520505115.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:55.932Z,1520505115.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:56.332Z,1520505116.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:56.734Z,1520505116.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:57.130Z,1520505117.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:57.528Z,1520505117.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:57.928Z,1520505117.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:58.343Z,1520505118.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:31:58.751Z,1520505118.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:01.841Z,1520505121.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:01.974Z,1520505121.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:02.341Z,1520505122.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:02.743Z,1520505122.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:03.143Z,1520505123.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:03.544Z,1520505123.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:03.994Z,1520505123.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:04.370Z,1520505124.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:04.738Z,1520505124.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:05.141Z,1520505125.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:05.534Z,1520505125.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:05.938Z,1520505125.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:06.344Z,1520505126.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:06.748Z,1520505126.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:07.146Z,1520505127.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:07.541Z,1520505127.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:07.941Z,1520505127.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:08.338Z,1520505128.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:08.743Z,1520505128.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:09.141Z,1520505129.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:09.543Z,1520505129.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:09.947Z,1520505129.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:10.344Z,1520505130.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:10.746Z,1520505130.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:11.141Z,1520505131.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:11.543Z,1520505131.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:11.938Z,1520505131.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:12.344Z,1520505132.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:12.749Z,1520505132.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:13.144Z,1520505133.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:13.544Z,1520505133.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:13.935Z,1520505133.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:14.338Z,1520505134.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:14.742Z,1520505134.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:15.141Z,1520505135.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:15.546Z,1520505135.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:15.950Z,1520505135.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:16.355Z,1520505136.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:16.747Z,1520505136.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:17.142Z,1520505137.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:17.538Z,1520505137.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:17.942Z,1520505137.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:18.348Z,1520505138.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:18.755Z,1520505138.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:19.155Z,1520505139.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:19.542Z,1520505139.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:19.946Z,1520505139.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:20.347Z,1520505140.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:20.743Z,1520505140.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:21.146Z,1520505141.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:21.547Z,1520505141.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:21.951Z,1520505141.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:22.352Z,1520505142.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:22.739Z,1520505142.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:23.143Z,1520505143.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:23.546Z,1520505143.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:23.942Z,1520505143.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:24.348Z,1520505144.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:24.751Z,1520505144.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:25.155Z,1520505145.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:25.542Z,1520505145.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:25.955Z,1520505145.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:26.355Z,1520505146.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:26.747Z,1520505146.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:27.144Z,1520505147.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:27.591Z,1520505147.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:27.953Z,1520505147.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:28.353Z,1520505148.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:28.734Z,1520505148.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:29.133Z,1520505149.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:29.538Z,1520505149.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:29.932Z,1520505149.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:30.406Z,1520505150.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:30.755Z,1520505150.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:31.152Z,1520505151.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:31.538Z,1520505151.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:31.943Z,1520505151.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:32.345Z,1520505152.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:32.742Z,1520505152.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:33.146Z,1520505153.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:33.552Z,1520505153.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:33.956Z,1520505153.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:34.355Z,1520505154.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:34.742Z,1520505154.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:35.142Z,1520505155.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:35.543Z,1520505155.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:35.945Z,1520505155.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:36.354Z,1520505156.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:36.752Z,1520505156.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:37.148Z,1520505157.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:37.548Z,1520505157.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:37.942Z,1520505157.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:38.340Z,1520505158.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:38.753Z,1520505158.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:39.143Z,1520505159.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:39.553Z,1520505159.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:39.950Z,1520505159.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:40.355Z,1520505160.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:40.742Z,1520505160.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:41.158Z,1520505161.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:41.547Z,1520505161.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:41.948Z,1520505161.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:42.355Z,1520505162.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:42.749Z,1520505162.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:43.149Z,1520505163.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:43.551Z,1520505163.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:43.947Z,1520505163.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:44.342Z,1520505164.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:44.746Z,1520505164.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:45.146Z,1520505165.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:45.548Z,1520505165.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:45.954Z,1520505165.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:46.361Z,1520505166.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:46.749Z,1520505166.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:47.151Z,1520505167.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:47.549Z,1520505167.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:47.949Z,1520505167.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:48.355Z,1520505168.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:48.751Z,1520505168.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:49.157Z,1520505169.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:49.554Z,1520505169.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:49.949Z,1520505169.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:50.350Z,1520505170.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:50.751Z,1520505170.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:51.131Z,1520505171.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:51.563Z,1520505171.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:51.963Z,1520505171.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:52.355Z,1520505172.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:52.757Z,1520505172.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:53.161Z,1520505173.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:53.532Z,1520505173.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:53.938Z,1520505173.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:54.367Z,1520505174.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:54.744Z,1520505174.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:55.148Z,1520505175.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:55.537Z,1520505175.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:55.940Z,1520505175.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:56.342Z,1520505176.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:56.739Z,1520505176.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:57.142Z,1520505177.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:57.546Z,1520505177.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:57.943Z,1520505177.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:58.346Z,1520505178.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:32:58.742Z,1520505178.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:01.840Z,1520505181.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:01.975Z,1520505181.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:02.352Z,1520505182.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:02.756Z,1520505182.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:03.148Z,1520505183.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:03.550Z,1520505183.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:03.945Z,1520505183.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:04.345Z,1520505184.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:04.747Z,1520505184.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:05.145Z,1520505185.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:05.554Z,1520505185.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:05.952Z,1520505185.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:06.351Z,1520505186.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:06.740Z,1520505186.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:07.141Z,1520505187.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:07.544Z,1520505187.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:07.945Z,1520505187.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:08.352Z,1520505188.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:08.751Z,1520505188.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:09.158Z,1520505189.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:09.550Z,1520505189.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:09.947Z,1520505189.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:10.347Z,1520505190.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:10.742Z,1520505190.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:11.146Z,1520505191.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:11.552Z,1520505191.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:11.954Z,1520505191.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:12.358Z,1520505192.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:12.747Z,1520505192.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:13.150Z,1520505193.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:13.550Z,1520505193.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:13.950Z,1520505193.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:14.358Z,1520505194.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:14.766Z,1520505194.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:15.157Z,1520505195.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:15.551Z,1520505195.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:15.954Z,1520505195.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:16.355Z,1520505196.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:16.754Z,1520505196.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:17.158Z,1520505197.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:17.563Z,1520505197.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:17.959Z,1520505197.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:18.363Z,1520505198.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:18.754Z,1520505198.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:19.158Z,1520505199.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:19.558Z,1520505199.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:19.954Z,1520505199.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:20.356Z,1520505200.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:20.760Z,1520505200.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:21.154Z,1520505201.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:21.554Z,1520505201.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:21.957Z,1520505201.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:22.331Z,1520505202.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:22.754Z,1520505202.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:23.137Z,1520505203.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:23.540Z,1520505203.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:23.964Z,1520505203.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:24.363Z,1520505204.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:24.735Z,1520505204.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:25.161Z,1520505205.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:25.542Z,1520505205.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:25.939Z,1520505205.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:26.354Z,1520505206.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:26.752Z,1520505206.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:27.151Z,1520505207.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:27.542Z,1520505207.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:27.946Z,1520505207.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:28.351Z,1520505208.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:28.750Z,1520505208.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:29.214Z,1520505209.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:29.559Z,1520505209.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:29.956Z,1520505209.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:30.359Z,1520505210.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:30.736Z,1520505210.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:31.138Z,1520505211.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:31.540Z,1520505211.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:31.963Z,1520505211.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:32.368Z,1520505212.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:32.772Z,1520505212.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:33.152Z,1520505213.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:33.543Z,1520505213.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:33.942Z,1520505213.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:34.343Z,1520505214.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:34.750Z,1520505214.750 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:34.751Z,1520505214.751 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57
2018-03-08T10:33:34.751Z,1520505214.751 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T10:33:34.753Z,1520505214.753 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:34.753Z,1520505214.753 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57
2018-03-08T10:33:34.753Z,1520505214.753 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T10:33:34.754Z,1520505214.754 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:34.754Z,1520505214.754 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 57
2018-03-08T10:33:34.755Z,1520505214.755 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T10:33:34.783Z,1520505214.783 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T10:33:34.783Z,1520505214.783 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T10:33:34.783Z,1520505214.783 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T10:33:35.163Z,1520505215.163 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T10:33:35.163Z,1520505215.163 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57
2018-03-08T10:33:35.164Z,1520505215.164 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T10:33:35.164Z,1520505215.164 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57
2018-03-08T10:33:35.164Z,1520505215.164 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T10:33:35.164Z,1520505215.164 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 57
2018-03-08T10:33:35.549Z,1520505215.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T10:33:35.549Z,1520505215.549 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:33:35.549Z,1520505215.549 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:33:35.550Z,1520505215.550 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T10:33:35.550Z,1520505215.550 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:33:35.550Z,1520505215.550 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:33:35.551Z,1520505215.551 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T10:33:35.551Z,1520505215.551 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:33:35.552Z,1520505215.552 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:33:35.955Z,1520505215.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T10:33:35.956Z,1520505215.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:36.362Z,1520505216.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T10:33:36.363Z,1520505216.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:36.742Z,1520505216.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T10:33:36.743Z,1520505216.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:37.152Z,1520505217.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T10:33:37.153Z,1520505217.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:37.554Z,1520505217.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T10:33:37.555Z,1520505217.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:37.954Z,1520505217.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T10:33:37.955Z,1520505217.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:38.362Z,1520505218.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T10:33:38.363Z,1520505218.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:38.774Z,1520505218.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T10:33:38.775Z,1520505218.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:39.158Z,1520505219.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T10:33:39.159Z,1520505219.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:39.554Z,1520505219.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T10:33:39.555Z,1520505219.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:39.958Z,1520505219.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T10:33:39.959Z,1520505219.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:40.357Z,1520505220.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T10:33:40.358Z,1520505220.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:40.754Z,1520505220.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T10:33:40.755Z,1520505220.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:41.157Z,1520505221.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T10:33:41.158Z,1520505221.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:41.551Z,1520505221.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T10:33:41.552Z,1520505221.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:41.966Z,1520505221.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T10:33:41.967Z,1520505221.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:42.366Z,1520505222.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T10:33:42.367Z,1520505222.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:42.738Z,1520505222.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T10:33:42.739Z,1520505222.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:43.162Z,1520505223.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T10:33:43.163Z,1520505223.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:43.570Z,1520505223.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T10:33:43.571Z,1520505223.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:43.946Z,1520505223.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T10:33:43.947Z,1520505223.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:44.348Z,1520505224.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T10:33:44.349Z,1520505224.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:44.748Z,1520505224.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T10:33:44.749Z,1520505224.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:45.149Z,1520505225.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T10:33:45.150Z,1520505225.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:45.541Z,1520505225.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T10:33:45.542Z,1520505225.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:45.946Z,1520505225.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T10:33:45.947Z,1520505225.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:46.350Z,1520505226.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T10:33:46.351Z,1520505226.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:46.750Z,1520505226.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T10:33:46.751Z,1520505226.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:47.144Z,1520505227.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T10:33:47.145Z,1520505227.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:47.554Z,1520505227.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T10:33:47.555Z,1520505227.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:47.951Z,1520505227.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T10:33:47.952Z,1520505227.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:48.348Z,1520505228.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T10:33:48.349Z,1520505228.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:48.745Z,1520505228.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T10:33:48.746Z,1520505228.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:49.145Z,1520505229.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T10:33:49.146Z,1520505229.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:49.547Z,1520505229.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T10:33:49.548Z,1520505229.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:49.947Z,1520505229.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T10:33:49.948Z,1520505229.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:50.351Z,1520505230.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T10:33:50.352Z,1520505230.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:50.752Z,1520505230.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T10:33:50.753Z,1520505230.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:51.147Z,1520505231.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T10:33:51.148Z,1520505231.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:51.542Z,1520505231.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T10:33:51.543Z,1520505231.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:51.958Z,1520505231.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T10:33:51.959Z,1520505231.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:52.350Z,1520505232.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T10:33:52.351Z,1520505232.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:52.751Z,1520505232.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T10:33:52.751Z,1520505232.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:53.146Z,1520505233.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T10:33:53.147Z,1520505233.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:53.556Z,1520505233.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T10:33:53.557Z,1520505233.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:53.956Z,1520505233.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T10:33:53.957Z,1520505233.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:54.361Z,1520505234.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T10:33:54.362Z,1520505234.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:54.744Z,1520505234.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T10:33:54.745Z,1520505234.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:55.162Z,1520505235.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:55.551Z,1520505235.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:55.949Z,1520505235.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:56.359Z,1520505236.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:56.766Z,1520505236.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:57.157Z,1520505237.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:57.554Z,1520505237.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:57.949Z,1520505237.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:58.355Z,1520505238.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:33:58.763Z,1520505238.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:01.843Z,1520505241.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:01.987Z,1520505241.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:02.371Z,1520505242.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:02.768Z,1520505242.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:03.167Z,1520505243.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:03.567Z,1520505243.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:03.949Z,1520505243.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:04.369Z,1520505244.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:04.771Z,1520505244.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:05.171Z,1520505245.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:05.571Z,1520505245.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:05.954Z,1520505245.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:06.354Z,1520505246.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:06.750Z,1520505246.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:07.149Z,1520505247.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:07.575Z,1520505247.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:07.972Z,1520505247.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:08.374Z,1520505248.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:08.765Z,1520505248.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:09.152Z,1520505249.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:09.550Z,1520505249.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:09.949Z,1520505249.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:10.375Z,1520505250.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:10.760Z,1520505250.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:11.160Z,1520505251.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:11.553Z,1520505251.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:11.958Z,1520505251.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:12.354Z,1520505252.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:12.754Z,1520505252.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:13.159Z,1520505253.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:13.560Z,1520505253.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:13.960Z,1520505253.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:14.367Z,1520505254.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:14.754Z,1520505254.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:15.158Z,1520505255.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:15.554Z,1520505255.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:15.955Z,1520505255.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:16.363Z,1520505256.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:16.767Z,1520505256.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:17.163Z,1520505257.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:17.558Z,1520505257.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:17.955Z,1520505257.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:18.355Z,1520505258.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:18.755Z,1520505258.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:19.155Z,1520505259.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:19.564Z,1520505259.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:19.964Z,1520505259.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:20.371Z,1520505260.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:20.754Z,1520505260.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:21.158Z,1520505261.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:21.553Z,1520505261.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:21.957Z,1520505261.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:22.363Z,1520505262.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:22.763Z,1520505262.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:23.160Z,1520505263.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:23.554Z,1520505263.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:23.954Z,1520505263.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:24.357Z,1520505264.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:24.754Z,1520505264.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:25.161Z,1520505265.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:25.570Z,1520505265.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:25.963Z,1520505265.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:26.360Z,1520505266.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:26.754Z,1520505266.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:27.154Z,1520505267.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:27.557Z,1520505267.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:27.954Z,1520505267.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:28.371Z,1520505268.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:28.767Z,1520505268.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:29.165Z,1520505269.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:29.560Z,1520505269.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:29.951Z,1520505269.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:30.362Z,1520505270.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:30.758Z,1520505270.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:31.157Z,1520505271.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:31.562Z,1520505271.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:31.964Z,1520505271.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:32.366Z,1520505272.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:32.755Z,1520505272.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:33.158Z,1520505273.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:33.559Z,1520505273.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:33.960Z,1520505273.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:34.368Z,1520505274.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:34.764Z,1520505274.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:35.166Z,1520505275.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:35.558Z,1520505275.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:35.959Z,1520505275.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:36.355Z,1520505276.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:36.753Z,1520505276.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:37.157Z,1520505277.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:37.567Z,1520505277.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:37.971Z,1520505277.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:38.364Z,1520505278.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:38.772Z,1520505278.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:39.164Z,1520505279.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:39.546Z,1520505279.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:39.949Z,1520505279.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:40.372Z,1520505280.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:40.768Z,1520505280.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:41.170Z,1520505281.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:41.552Z,1520505281.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:41.944Z,1520505281.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:42.349Z,1520505282.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:42.744Z,1520505282.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:43.149Z,1520505283.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:43.575Z,1520505283.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:43.973Z,1520505283.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:44.376Z,1520505284.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:44.753Z,1520505284.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:45.148Z,1520505285.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:45.552Z,1520505285.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:45.951Z,1520505285.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:46.381Z,1520505286.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:46.779Z,1520505286.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:47.156Z,1520505287.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:47.547Z,1520505287.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:47.951Z,1520505287.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:48.351Z,1520505288.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:48.749Z,1520505288.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:49.163Z,1520505289.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:49.560Z,1520505289.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:49.960Z,1520505289.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:50.359Z,1520505290.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:50.754Z,1520505290.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:51.153Z,1520505291.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:51.553Z,1520505291.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:51.950Z,1520505291.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:52.362Z,1520505292.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:52.760Z,1520505292.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:53.159Z,1520505293.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:53.549Z,1520505293.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:53.957Z,1520505293.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:54.358Z,1520505294.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:54.746Z,1520505294.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:55.159Z,1520505295.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:55.561Z,1520505295.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:55.964Z,1520505295.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:56.371Z,1520505296.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:56.762Z,1520505296.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:57.158Z,1520505297.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:57.557Z,1520505297.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:57.961Z,1520505297.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:58.365Z,1520505298.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:34:58.771Z,1520505298.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:02.040Z,1520505302.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:02.156Z,1520505302.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:02.518Z,1520505302.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:02.969Z,1520505302.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:03.341Z,1520505303.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:03.735Z,1520505303.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:04.174Z,1520505304.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:04.519Z,1520505304.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:04.925Z,1520505304.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:05.326Z,1520505305.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:05.725Z,1520505305.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:06.125Z,1520505306.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:06.532Z,1520505306.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:06.936Z,1520505306.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:07.331Z,1520505307.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:07.722Z,1520505307.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:08.126Z,1520505308.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:08.525Z,1520505308.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:08.931Z,1520505308.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:09.335Z,1520505309.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:09.735Z,1520505309.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:10.132Z,1520505310.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:10.523Z,1520505310.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:10.926Z,1520505310.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:11.325Z,1520505311.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:11.725Z,1520505311.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:12.130Z,1520505312.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:12.533Z,1520505312.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:12.937Z,1520505312.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:13.329Z,1520505313.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:13.728Z,1520505313.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:14.123Z,1520505314.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:14.527Z,1520505314.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:14.934Z,1520505314.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:15.338Z,1520505315.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:15.732Z,1520505315.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:16.139Z,1520505316.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:16.531Z,1520505316.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:16.930Z,1520505316.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:17.333Z,1520505317.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:17.711Z,1520505317.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:18.135Z,1520505318.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:18.542Z,1520505318.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:18.940Z,1520505318.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:19.338Z,1520505319.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:19.713Z,1520505319.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:20.118Z,1520505320.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:20.512Z,1520505320.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:20.917Z,1520505320.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:21.339Z,1520505321.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:21.736Z,1520505321.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:22.139Z,1520505322.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:22.511Z,1520505322.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:22.915Z,1520505322.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:23.318Z,1520505323.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:23.709Z,1520505323.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:24.117Z,1520505324.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:24.547Z,1520505324.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:24.943Z,1520505324.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:25.346Z,1520505325.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:25.711Z,1520505325.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:26.113Z,1520505326.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:26.522Z,1520505326.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:26.915Z,1520505326.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:27.321Z,1520505327.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:27.746Z,1520505327.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:28.128Z,1520505328.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:28.520Z,1520505328.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:28.920Z,1520505328.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:29.318Z,1520505329.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:29.722Z,1520505329.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:30.120Z,1520505330.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:30.525Z,1520505330.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:30.929Z,1520505330.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:31.325Z,1520505331.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:31.722Z,1520505331.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:32.121Z,1520505332.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:32.521Z,1520505332.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:32.926Z,1520505332.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:33.371Z,1520505333.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:33.738Z,1520505333.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:34.181Z,1520505334.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:34.536Z,1520505334.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:34.926Z,1520505334.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:35.327Z,1520505335.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:35.726Z,1520505335.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:36.123Z,1520505336.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:36.537Z,1520505336.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:36.937Z,1520505336.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:37.338Z,1520505337.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:37.731Z,1520505337.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:38.130Z,1520505338.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:38.515Z,1520505338.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:38.914Z,1520505338.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:39.345Z,1520505339.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:39.740Z,1520505339.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:40.146Z,1520505340.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:40.516Z,1520505340.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:40.917Z,1520505340.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:41.319Z,1520505341.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:41.711Z,1520505341.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:42.122Z,1520505342.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:42.551Z,1520505342.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:42.920Z,1520505342.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:43.328Z,1520505343.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:43.719Z,1520505343.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:44.119Z,1520505344.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:44.517Z,1520505344.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:44.917Z,1520505344.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:45.320Z,1520505345.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:45.732Z,1520505345.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:46.130Z,1520505346.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:46.513Z,1520505346.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:46.917Z,1520505346.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:47.329Z,1520505347.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:47.716Z,1520505347.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:48.122Z,1520505348.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:48.524Z,1520505348.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:48.928Z,1520505348.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:49.324Z,1520505349.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:49.719Z,1520505349.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:50.126Z,1520505350.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:50.526Z,1520505350.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:50.922Z,1520505350.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:51.328Z,1520505351.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:51.728Z,1520505351.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:52.135Z,1520505352.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:52.515Z,1520505352.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:52.918Z,1520505352.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:53.322Z,1520505353.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:53.717Z,1520505353.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:54.120Z,1520505354.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:54.539Z,1520505354.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:54.939Z,1520505354.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:55.327Z,1520505355.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:55.729Z,1520505355.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:56.121Z,1520505356.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:56.531Z,1520505356.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:56.919Z,1520505356.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:57.332Z,1520505357.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:57.732Z,1520505357.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:58.134Z,1520505358.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:58.523Z,1520505358.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:58.526Z,1520505358.526 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T10:35:58.526Z,1520505358.526 [Default:CheckIn:C.Wait] Stopped
2018-03-08T10:35:58.526Z,1520505358.526 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T10:35:58.526Z,1520505358.526 [Default:CheckIn:D] Running Loop=1
2018-03-08T10:35:58.931Z,1520505358.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:58.934Z,1520505358.934 [Default:CheckIn:D] Stopped
2018-03-08T10:35:58.934Z,1520505358.934 [Default:CheckIn:E] Running Loop=1
2018-03-08T10:35:59.327Z,1520505359.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:35:59.334Z,1520505359.334 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 170.235482 min 
2018-03-08T10:35:59.335Z,1520505359.335 [Default:CheckIn:E] Stopped
2018-03-08T10:35:59.335Z,1520505359.335 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T10:35:59.335Z,1520505359.335 [Default:CheckIn] Stopped
2018-03-08T10:35:59.335Z,1520505359.335 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T10:35:59.335Z,1520505359.335 [Default:CheckIn](INFO): Running loop #17
2018-03-08T10:35:59.335Z,1520505359.335 [Default:CheckIn] Running Loop=17
2018-03-08T10:35:59.335Z,1520505359.335 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T10:35:59.336Z,1520505359.336 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T10:36:02.427Z,1520505362.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:02.571Z,1520505362.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:02.926Z,1520505362.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:03.327Z,1520505363.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:03.700Z,1520505363.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:04.100Z,1520505364.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:04.497Z,1520505364.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:04.899Z,1520505364.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:05.327Z,1520505365.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:05.708Z,1520505365.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:06.101Z,1520505366.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:06.504Z,1520505366.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:06.898Z,1520505366.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:07.292Z,1520505367.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:07.699Z,1520505367.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:08.098Z,1520505368.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:08.501Z,1520505368.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:08.912Z,1520505368.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:09.304Z,1520505369.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:09.695Z,1520505369.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:10.102Z,1520505370.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:10.503Z,1520505370.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:10.898Z,1520505370.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:11.308Z,1520505371.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:11.708Z,1520505371.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:12.114Z,1520505372.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:12.498Z,1520505372.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:12.903Z,1520505372.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:13.297Z,1520505373.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:13.707Z,1520505373.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:14.098Z,1520505374.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:14.518Z,1520505374.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:14.911Z,1520505374.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:15.313Z,1520505375.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:15.700Z,1520505375.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:16.101Z,1520505376.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:16.499Z,1520505376.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:16.899Z,1520505376.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:17.313Z,1520505377.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:17.712Z,1520505377.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:18.118Z,1520505378.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:18.503Z,1520505378.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:18.903Z,1520505378.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:19.301Z,1520505379.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:19.706Z,1520505379.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:20.102Z,1520505380.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:20.518Z,1520505380.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:20.911Z,1520505380.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:21.318Z,1520505381.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:21.702Z,1520505381.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:22.102Z,1520505382.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:22.506Z,1520505382.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:22.903Z,1520505382.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:23.318Z,1520505383.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:23.711Z,1520505383.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:24.118Z,1520505384.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:24.502Z,1520505384.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:24.898Z,1520505384.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:25.302Z,1520505385.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:25.704Z,1520505385.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:26.110Z,1520505386.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:26.508Z,1520505386.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:26.911Z,1520505386.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:27.314Z,1520505387.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:27.703Z,1520505387.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:28.109Z,1520505388.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:28.507Z,1520505388.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:28.915Z,1520505388.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:29.315Z,1520505389.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:29.730Z,1520505389.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:30.114Z,1520505390.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:30.517Z,1520505390.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:30.894Z,1520505390.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:31.291Z,1520505391.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:31.718Z,1520505391.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:32.091Z,1520505392.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:32.523Z,1520505392.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:32.924Z,1520505392.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:33.329Z,1520505393.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:33.695Z,1520505393.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:34.103Z,1520505394.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:34.496Z,1520505394.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:34.897Z,1520505394.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:35.328Z,1520505395.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:35.724Z,1520505395.724 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:35.724Z,1520505395.724 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58
2018-03-08T10:36:35.724Z,1520505395.724 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T10:36:35.726Z,1520505395.726 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:35.726Z,1520505395.726 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58
2018-03-08T10:36:35.726Z,1520505395.726 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T10:36:35.728Z,1520505395.728 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:35.728Z,1520505395.728 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 58
2018-03-08T10:36:35.728Z,1520505395.728 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T10:36:35.757Z,1520505395.757 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T10:36:35.758Z,1520505395.758 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T10:36:35.758Z,1520505395.758 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T10:36:36.133Z,1520505396.133 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T10:36:36.134Z,1520505396.134 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58
2018-03-08T10:36:36.134Z,1520505396.134 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T10:36:36.134Z,1520505396.134 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58
2018-03-08T10:36:36.135Z,1520505396.135 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T10:36:36.135Z,1520505396.135 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 58
2018-03-08T10:36:36.505Z,1520505396.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T10:36:36.506Z,1520505396.506 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:36:36.506Z,1520505396.506 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:36:36.507Z,1520505396.507 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T10:36:36.507Z,1520505396.507 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:36:36.507Z,1520505396.507 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:36:36.508Z,1520505396.508 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T10:36:36.508Z,1520505396.508 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:36:36.509Z,1520505396.509 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:36:36.908Z,1520505396.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T10:36:36.909Z,1520505396.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:37.300Z,1520505397.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T10:36:37.301Z,1520505397.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:37.698Z,1520505397.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T10:36:37.699Z,1520505397.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:38.110Z,1520505398.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T10:36:38.111Z,1520505398.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:38.511Z,1520505398.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T10:36:38.512Z,1520505398.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:38.922Z,1520505398.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T10:36:38.923Z,1520505398.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:39.317Z,1520505399.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T10:36:39.318Z,1520505399.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:39.706Z,1520505399.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T10:36:39.707Z,1520505399.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:40.106Z,1520505400.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T10:36:40.107Z,1520505400.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:40.502Z,1520505400.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T10:36:40.503Z,1520505400.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:40.899Z,1520505400.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T10:36:40.899Z,1520505400.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:41.314Z,1520505401.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T10:36:41.315Z,1520505401.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:41.718Z,1520505401.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T10:36:41.719Z,1520505401.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:42.118Z,1520505402.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T10:36:42.119Z,1520505402.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:42.506Z,1520505402.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T10:36:42.507Z,1520505402.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:42.908Z,1520505402.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T10:36:42.909Z,1520505402.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:43.301Z,1520505403.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T10:36:43.302Z,1520505403.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:43.705Z,1520505403.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T10:36:43.706Z,1520505403.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:44.109Z,1520505404.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T10:36:44.110Z,1520505404.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:44.505Z,1520505404.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T10:36:44.506Z,1520505404.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:44.916Z,1520505404.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T10:36:44.917Z,1520505404.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:45.314Z,1520505405.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T10:36:45.315Z,1520505405.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:45.721Z,1520505405.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T10:36:45.722Z,1520505405.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:46.106Z,1520505406.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T10:36:46.107Z,1520505406.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:46.503Z,1520505406.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T10:36:46.504Z,1520505406.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:46.907Z,1520505406.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T10:36:46.908Z,1520505406.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:47.313Z,1520505407.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T10:36:47.314Z,1520505407.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:47.708Z,1520505407.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T10:36:47.710Z,1520505407.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:48.106Z,1520505408.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T10:36:48.107Z,1520505408.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:48.499Z,1520505408.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T10:36:48.500Z,1520505408.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:48.917Z,1520505408.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T10:36:48.918Z,1520505408.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:49.310Z,1520505409.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T10:36:49.311Z,1520505409.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:49.702Z,1520505409.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T10:36:49.703Z,1520505409.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:50.106Z,1520505410.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T10:36:50.107Z,1520505410.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:50.506Z,1520505410.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T10:36:50.507Z,1520505410.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:50.912Z,1520505410.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T10:36:50.918Z,1520505410.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:51.312Z,1520505411.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T10:36:51.313Z,1520505411.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:51.706Z,1520505411.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T10:36:51.707Z,1520505411.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:52.109Z,1520505412.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T10:36:52.110Z,1520505412.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:52.507Z,1520505412.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T10:36:52.508Z,1520505412.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:52.904Z,1520505412.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T10:36:52.905Z,1520505412.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:53.311Z,1520505413.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T10:36:53.312Z,1520505413.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:53.714Z,1520505413.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T10:36:53.715Z,1520505413.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:54.114Z,1520505414.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T10:36:54.115Z,1520505414.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:54.504Z,1520505414.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T10:36:54.505Z,1520505414.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:54.908Z,1520505414.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T10:36:54.909Z,1520505414.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:55.310Z,1520505415.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T10:36:55.311Z,1520505415.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:55.706Z,1520505415.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T10:36:55.707Z,1520505415.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:56.111Z,1520505416.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:56.517Z,1520505416.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:56.913Z,1520505416.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:57.312Z,1520505417.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:57.709Z,1520505417.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:58.109Z,1520505418.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:58.511Z,1520505418.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:58.909Z,1520505418.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:36:59.313Z,1520505419.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:02.411Z,1520505422.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:02.559Z,1520505422.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:02.887Z,1520505422.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:03.282Z,1520505423.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:03.687Z,1520505423.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:04.090Z,1520505424.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:04.526Z,1520505424.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:04.894Z,1520505424.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:05.296Z,1520505425.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:05.682Z,1520505425.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:06.118Z,1520505426.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:06.482Z,1520505426.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:06.883Z,1520505426.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:07.313Z,1520505427.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:07.692Z,1520505427.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:08.094Z,1520505428.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:08.485Z,1520505428.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:08.948Z,1520505428.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:09.285Z,1520505429.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:09.686Z,1520505429.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:10.090Z,1520505430.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:10.488Z,1520505430.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:10.893Z,1520505430.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:11.288Z,1520505431.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:11.685Z,1520505431.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:12.085Z,1520505432.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:12.485Z,1520505432.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:12.882Z,1520505432.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:13.289Z,1520505433.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:13.692Z,1520505433.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:14.094Z,1520505434.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:14.484Z,1520505434.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:14.894Z,1520505434.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:15.285Z,1520505435.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:15.687Z,1520505435.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:16.086Z,1520505436.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:16.489Z,1520505436.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:16.892Z,1520505436.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:17.294Z,1520505437.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:17.686Z,1520505437.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:18.092Z,1520505438.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:18.489Z,1520505438.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:18.884Z,1520505438.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:19.303Z,1520505439.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:19.700Z,1520505439.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:20.110Z,1520505440.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:20.494Z,1520505440.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:20.887Z,1520505440.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:21.333Z,1520505441.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:21.691Z,1520505441.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:22.083Z,1520505442.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:22.510Z,1520505442.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:22.894Z,1520505442.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:23.311Z,1520505443.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:23.689Z,1520505443.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:24.131Z,1520505444.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:24.483Z,1520505444.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:24.886Z,1520505444.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:25.285Z,1520505445.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:25.694Z,1520505445.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:26.096Z,1520505446.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:26.475Z,1520505446.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:26.901Z,1520505446.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:27.295Z,1520505447.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:27.672Z,1520505447.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:28.098Z,1520505448.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:28.506Z,1520505448.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:28.896Z,1520505448.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:29.305Z,1520505449.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:29.702Z,1520505449.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:30.099Z,1520505450.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:30.479Z,1520505450.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:30.882Z,1520505450.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:31.301Z,1520505451.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:31.709Z,1520505451.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:32.111Z,1520505452.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:32.479Z,1520505452.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:32.891Z,1520505452.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:33.282Z,1520505453.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:33.684Z,1520505453.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:34.086Z,1520505454.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:34.518Z,1520505454.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:34.891Z,1520505454.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:35.296Z,1520505455.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:35.685Z,1520505455.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:36.079Z,1520505456.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:36.483Z,1520505456.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:36.886Z,1520505456.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:37.287Z,1520505457.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:37.692Z,1520505457.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:38.094Z,1520505458.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:38.477Z,1520505458.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:38.882Z,1520505458.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:39.286Z,1520505459.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:39.681Z,1520505459.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:40.090Z,1520505460.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:40.497Z,1520505460.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:40.888Z,1520505460.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:41.292Z,1520505461.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:41.686Z,1520505461.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:42.091Z,1520505462.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:42.495Z,1520505462.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:42.889Z,1520505462.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:43.293Z,1520505463.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:43.706Z,1520505463.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:44.100Z,1520505464.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:44.490Z,1520505464.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:44.889Z,1520505464.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:45.285Z,1520505465.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:45.689Z,1520505465.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:46.083Z,1520505466.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:46.501Z,1520505466.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:46.893Z,1520505466.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:47.295Z,1520505467.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:47.685Z,1520505467.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:48.093Z,1520505468.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:48.494Z,1520505468.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:48.897Z,1520505468.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:49.291Z,1520505469.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:49.699Z,1520505469.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:50.098Z,1520505470.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:50.491Z,1520505470.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:50.897Z,1520505470.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:51.274Z,1520505471.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:51.678Z,1520505471.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:52.082Z,1520505472.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:52.510Z,1520505472.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:52.888Z,1520505472.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:53.303Z,1520505473.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:53.682Z,1520505473.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:54.081Z,1520505474.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:54.491Z,1520505474.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:54.883Z,1520505474.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:55.291Z,1520505475.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:55.713Z,1520505475.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:56.088Z,1520505476.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:56.491Z,1520505476.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:56.883Z,1520505476.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:57.283Z,1520505477.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:57.684Z,1520505477.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:58.082Z,1520505478.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:58.451Z,1520505478.451 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T10:37:58.451Z,1520505478.451 [NAL9602] Data Fault, FailCount= 2
2018-03-08T10:37:58.451Z,1520505478.451 [NAL9602](ERROR): Data Fault
2018-03-08T10:37:58.482Z,1520505478.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:58.496Z,1520505478.496 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T10:37:58.842Z,1520505478.842 [NAL9602](INFO): Powering down
2018-03-08T10:37:58.898Z,1520505478.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:59.285Z,1520505479.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:59.681Z,1520505479.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:37:59.694Z,1520505479.694 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T10:37:59.694Z,1520505479.694 [NAL9602] No Fault, FailCount= 2
2018-03-08T10:38:02.797Z,1520505482.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:02.935Z,1520505482.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:03.294Z,1520505483.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:03.689Z,1520505483.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:04.094Z,1520505484.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:04.489Z,1520505484.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:04.890Z,1520505484.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:05.291Z,1520505485.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:05.686Z,1520505485.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:06.089Z,1520505486.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:06.472Z,1520505486.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:06.900Z,1520505486.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:07.271Z,1520505487.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:07.697Z,1520505487.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:08.099Z,1520505488.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:08.475Z,1520505488.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:08.904Z,1520505488.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:09.275Z,1520505489.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:09.676Z,1520505489.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:10.105Z,1520505490.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:10.478Z,1520505490.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:10.878Z,1520505490.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:11.281Z,1520505491.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:11.682Z,1520505491.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:12.075Z,1520505492.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:12.510Z,1520505492.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:12.874Z,1520505492.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:13.275Z,1520505493.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:13.684Z,1520505493.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:14.077Z,1520505494.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:14.482Z,1520505494.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:14.886Z,1520505494.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:15.285Z,1520505495.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:15.677Z,1520505495.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:16.088Z,1520505496.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:16.486Z,1520505496.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:16.878Z,1520505496.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:17.306Z,1520505497.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:17.711Z,1520505497.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:18.085Z,1520505498.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:18.482Z,1520505498.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:18.882Z,1520505498.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:19.278Z,1520505499.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:19.681Z,1520505499.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:20.090Z,1520505500.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:20.478Z,1520505500.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:20.881Z,1520505500.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:21.283Z,1520505501.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:21.678Z,1520505501.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:22.082Z,1520505502.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:22.490Z,1520505502.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:22.878Z,1520505502.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:23.294Z,1520505503.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:23.687Z,1520505503.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:24.082Z,1520505504.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:24.486Z,1520505504.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:24.887Z,1520505504.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:25.284Z,1520505505.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:25.685Z,1520505505.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:26.088Z,1520505506.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:26.481Z,1520505506.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:26.882Z,1520505506.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:27.287Z,1520505507.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:27.686Z,1520505507.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:28.082Z,1520505508.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:28.487Z,1520505508.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:28.850Z,1520505508.850 [NAL9602](INFO): Powering up NAL9602
2018-03-08T10:38:28.896Z,1520505508.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:29.286Z,1520505509.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:29.691Z,1520505509.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:30.086Z,1520505510.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:30.484Z,1520505510.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:30.888Z,1520505510.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:31.286Z,1520505511.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:31.688Z,1520505511.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:32.087Z,1520505512.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:32.482Z,1520505512.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:32.886Z,1520505512.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:33.286Z,1520505513.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:33.686Z,1520505513.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:34.087Z,1520505514.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:34.487Z,1520505514.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:34.886Z,1520505514.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:35.287Z,1520505515.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:35.688Z,1520505515.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:36.086Z,1520505516.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:36.495Z,1520505516.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:36.887Z,1520505516.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:37.290Z,1520505517.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:37.687Z,1520505517.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:38.090Z,1520505518.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:38.486Z,1520505518.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:38.888Z,1520505518.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:39.285Z,1520505519.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:39.702Z,1520505519.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:40.050Z,1520505520.050 [NAL9602](INFO): NAL9602 initialized
2018-03-08T10:38:40.103Z,1520505520.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:40.492Z,1520505520.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:40.897Z,1520505520.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:41.300Z,1520505521.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:41.696Z,1520505521.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:42.089Z,1520505522.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:42.488Z,1520505522.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:42.890Z,1520505522.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:43.298Z,1520505523.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:43.696Z,1520505523.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:44.096Z,1520505524.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:44.501Z,1520505524.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:44.890Z,1520505524.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:45.294Z,1520505525.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:45.696Z,1520505525.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:46.100Z,1520505526.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:46.511Z,1520505526.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:46.897Z,1520505526.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:47.297Z,1520505527.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:47.702Z,1520505527.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:48.104Z,1520505528.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:48.505Z,1520505528.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:48.899Z,1520505528.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:49.298Z,1520505529.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:49.703Z,1520505529.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:50.102Z,1520505530.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:50.501Z,1520505530.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:50.895Z,1520505530.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:51.307Z,1520505531.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:51.711Z,1520505531.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:52.111Z,1520505532.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:52.504Z,1520505532.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:52.899Z,1520505532.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:53.303Z,1520505533.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:53.711Z,1520505533.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:54.106Z,1520505534.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:54.506Z,1520505534.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:54.886Z,1520505534.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:55.278Z,1520505535.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:55.706Z,1520505535.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:56.111Z,1520505536.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:56.504Z,1520505536.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:56.906Z,1520505536.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:57.285Z,1520505537.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:57.710Z,1520505537.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:58.113Z,1520505538.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:58.495Z,1520505538.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:58.883Z,1520505538.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:59.286Z,1520505539.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:38:59.696Z,1520505539.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:02.796Z,1520505542.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:02.933Z,1520505542.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:03.322Z,1520505543.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:03.727Z,1520505543.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:04.124Z,1520505544.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:04.509Z,1520505544.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:04.933Z,1520505544.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:05.331Z,1520505545.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:05.734Z,1520505545.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:06.106Z,1520505546.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:06.530Z,1520505546.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:06.910Z,1520505546.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:07.306Z,1520505547.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:07.737Z,1520505547.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:08.116Z,1520505548.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:08.535Z,1520505548.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:08.908Z,1520505548.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:09.307Z,1520505549.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:09.712Z,1520505549.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:10.107Z,1520505550.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:10.507Z,1520505550.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:10.935Z,1520505550.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:11.332Z,1520505551.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:11.737Z,1520505551.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:12.107Z,1520505552.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:12.537Z,1520505552.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:12.911Z,1520505552.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:13.311Z,1520505553.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:13.730Z,1520505553.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:14.132Z,1520505554.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:14.534Z,1520505554.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:14.914Z,1520505554.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:15.312Z,1520505555.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:15.710Z,1520505555.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:16.114Z,1520505556.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:16.508Z,1520505556.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:16.915Z,1520505556.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:17.320Z,1520505557.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:17.717Z,1520505557.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:18.113Z,1520505558.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:18.510Z,1520505558.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:18.911Z,1520505558.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:19.308Z,1520505559.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:19.719Z,1520505559.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:20.121Z,1520505560.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:20.516Z,1520505560.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:20.914Z,1520505560.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:21.310Z,1520505561.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:21.707Z,1520505561.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:22.114Z,1520505562.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:22.512Z,1520505562.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:22.919Z,1520505562.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:23.320Z,1520505563.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:23.718Z,1520505563.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:24.114Z,1520505564.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:24.509Z,1520505564.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:24.912Z,1520505564.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:25.308Z,1520505565.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:25.719Z,1520505565.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:26.120Z,1520505566.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:26.519Z,1520505566.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:26.919Z,1520505566.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:27.318Z,1520505567.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:27.705Z,1520505567.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:28.110Z,1520505568.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:28.507Z,1520505568.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:28.916Z,1520505568.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:29.316Z,1520505569.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:29.716Z,1520505569.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:30.113Z,1520505570.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:30.512Z,1520505570.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:30.912Z,1520505570.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:31.307Z,1520505571.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:31.721Z,1520505571.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:32.120Z,1520505572.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:32.526Z,1520505572.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:32.914Z,1520505572.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:33.315Z,1520505573.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:33.708Z,1520505573.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:34.111Z,1520505574.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:34.519Z,1520505574.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:34.920Z,1520505574.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:35.320Z,1520505575.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:35.720Z,1520505575.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:36.119Z,1520505576.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:36.511Z,1520505576.511 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:36.511Z,1520505576.511 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59
2018-03-08T10:39:36.511Z,1520505576.511 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T10:39:36.513Z,1520505576.513 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:36.513Z,1520505576.513 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59
2018-03-08T10:39:36.513Z,1520505576.513 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T10:39:36.515Z,1520505576.515 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:36.515Z,1520505576.515 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 59
2018-03-08T10:39:36.515Z,1520505576.515 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T10:39:36.527Z,1520505576.527 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T10:39:36.527Z,1520505576.527 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T10:39:36.527Z,1520505576.527 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T10:39:36.928Z,1520505576.928 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T10:39:36.929Z,1520505576.929 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59
2018-03-08T10:39:36.929Z,1520505576.929 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T10:39:36.929Z,1520505576.929 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59
2018-03-08T10:39:36.930Z,1520505576.930 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T10:39:36.930Z,1520505576.930 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 59
2018-03-08T10:39:37.306Z,1520505577.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T10:39:37.306Z,1520505577.306 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:39:37.307Z,1520505577.307 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:39:37.307Z,1520505577.307 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T10:39:37.307Z,1520505577.307 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:39:37.308Z,1520505577.308 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:39:37.308Z,1520505577.308 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T10:39:37.309Z,1520505577.309 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:39:37.309Z,1520505577.309 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:39:37.735Z,1520505577.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T10:39:37.737Z,1520505577.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:38.128Z,1520505578.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T10:39:38.129Z,1520505578.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:38.523Z,1520505578.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T10:39:38.523Z,1520505578.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:38.918Z,1520505578.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T10:39:38.919Z,1520505578.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:39.313Z,1520505579.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T10:39:39.314Z,1520505579.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:39.706Z,1520505579.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T10:39:39.707Z,1520505579.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:40.115Z,1520505580.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T10:39:40.116Z,1520505580.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:40.520Z,1520505580.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T10:39:40.521Z,1520505580.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:40.921Z,1520505580.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T10:39:40.922Z,1520505580.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:41.324Z,1520505581.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T10:39:41.325Z,1520505581.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:41.723Z,1520505581.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T10:39:41.724Z,1520505581.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:42.114Z,1520505582.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T10:39:42.115Z,1520505582.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:42.518Z,1520505582.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T10:39:42.519Z,1520505582.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:42.923Z,1520505582.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T10:39:42.924Z,1520505582.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:43.299Z,1520505583.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T10:39:43.300Z,1520505583.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:43.730Z,1520505583.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T10:39:43.731Z,1520505583.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:44.127Z,1520505584.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T10:39:44.128Z,1520505584.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:44.522Z,1520505584.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T10:39:44.523Z,1520505584.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:44.925Z,1520505584.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T10:39:44.926Z,1520505584.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:45.301Z,1520505585.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T10:39:45.302Z,1520505585.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:45.699Z,1520505585.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T10:39:45.699Z,1520505585.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:46.126Z,1520505586.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T10:39:46.127Z,1520505586.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:46.509Z,1520505586.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T10:39:46.510Z,1520505586.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:46.912Z,1520505586.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T10:39:46.929Z,1520505586.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:47.335Z,1520505587.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T10:39:47.336Z,1520505587.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:47.739Z,1520505587.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T10:39:47.740Z,1520505587.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:48.114Z,1520505588.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T10:39:48.115Z,1520505588.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:48.506Z,1520505588.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T10:39:48.507Z,1520505588.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:48.910Z,1520505588.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T10:39:48.911Z,1520505588.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:49.310Z,1520505589.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T10:39:49.311Z,1520505589.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:49.716Z,1520505589.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T10:39:49.717Z,1520505589.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:50.141Z,1520505590.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T10:39:50.142Z,1520505590.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:50.512Z,1520505590.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T10:39:50.513Z,1520505590.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:50.907Z,1520505590.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T10:39:50.908Z,1520505590.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:51.310Z,1520505591.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T10:39:51.311Z,1520505591.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:51.708Z,1520505591.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T10:39:51.709Z,1520505591.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:52.111Z,1520505592.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T10:39:52.112Z,1520505592.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:52.510Z,1520505592.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T10:39:52.511Z,1520505592.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:52.909Z,1520505592.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T10:39:52.910Z,1520505592.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:53.319Z,1520505593.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T10:39:53.320Z,1520505593.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:53.723Z,1520505593.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T10:39:53.724Z,1520505593.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:54.114Z,1520505594.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T10:39:54.115Z,1520505594.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:54.510Z,1520505594.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T10:39:54.511Z,1520505594.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:54.912Z,1520505594.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T10:39:54.913Z,1520505594.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:55.306Z,1520505595.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T10:39:55.307Z,1520505595.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:55.716Z,1520505595.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T10:39:55.717Z,1520505595.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:56.116Z,1520505596.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T10:39:56.117Z,1520505596.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:56.516Z,1520505596.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:56.914Z,1520505596.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:57.314Z,1520505597.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:57.719Z,1520505597.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:58.114Z,1520505598.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:58.515Z,1520505598.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:58.920Z,1520505598.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:59.321Z,1520505599.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:39:59.721Z,1520505599.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:02.814Z,1520505602.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:02.947Z,1520505602.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:03.310Z,1520505603.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:03.707Z,1520505603.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:04.102Z,1520505604.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:04.504Z,1520505604.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:04.883Z,1520505604.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:05.274Z,1520505605.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:05.704Z,1520505605.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:06.107Z,1520505606.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:06.508Z,1520505606.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:06.885Z,1520505606.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:07.283Z,1520505607.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:07.692Z,1520505607.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:08.115Z,1520505608.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:08.496Z,1520505608.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:08.886Z,1520505608.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:09.287Z,1520505609.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:09.693Z,1520505609.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:10.100Z,1520505610.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:10.493Z,1520505610.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:10.897Z,1520505610.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:11.283Z,1520505611.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:11.694Z,1520505611.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:12.095Z,1520505612.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:12.492Z,1520505612.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:12.890Z,1520505612.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:13.294Z,1520505613.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:13.698Z,1520505613.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:14.102Z,1520505614.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:14.498Z,1520505614.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:14.889Z,1520505614.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:15.286Z,1520505615.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:15.692Z,1520505615.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:16.097Z,1520505616.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:16.498Z,1520505616.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:16.891Z,1520505616.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:17.290Z,1520505617.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:17.692Z,1520505617.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:18.091Z,1520505618.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:18.491Z,1520505618.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:18.890Z,1520505618.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:19.290Z,1520505619.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:19.702Z,1520505619.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:20.099Z,1520505620.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:20.506Z,1520505620.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:20.891Z,1520505620.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:21.290Z,1520505621.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:21.700Z,1520505621.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:22.106Z,1520505622.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:22.506Z,1520505622.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:22.891Z,1520505622.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:23.293Z,1520505623.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:23.700Z,1520505623.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:24.099Z,1520505624.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:24.495Z,1520505624.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:24.890Z,1520505624.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:25.289Z,1520505625.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:25.694Z,1520505625.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:26.106Z,1520505626.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:26.500Z,1520505626.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:26.891Z,1520505626.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:27.290Z,1520505627.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:27.699Z,1520505627.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:28.099Z,1520505628.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:28.503Z,1520505628.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:28.891Z,1520505628.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:29.294Z,1520505629.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:29.706Z,1520505629.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:30.099Z,1520505630.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:30.502Z,1520505630.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:30.891Z,1520505630.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:31.291Z,1520505631.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:31.697Z,1520505631.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:32.099Z,1520505632.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:32.499Z,1520505632.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:32.893Z,1520505632.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:33.289Z,1520505633.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:33.700Z,1520505633.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:34.106Z,1520505634.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:34.506Z,1520505634.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:34.888Z,1520505634.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:35.286Z,1520505635.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:35.696Z,1520505635.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:36.099Z,1520505636.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:36.506Z,1520505636.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:36.890Z,1520505636.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:37.286Z,1520505637.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:37.695Z,1520505637.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:38.107Z,1520505638.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:38.506Z,1520505638.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:38.891Z,1520505638.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:39.287Z,1520505639.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:39.699Z,1520505639.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:40.100Z,1520505640.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:40.499Z,1520505640.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:40.888Z,1520505640.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:41.287Z,1520505641.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:41.700Z,1520505641.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:42.100Z,1520505642.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:42.500Z,1520505642.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:42.893Z,1520505642.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:43.289Z,1520505643.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:43.697Z,1520505643.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:44.103Z,1520505644.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:44.505Z,1520505644.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:44.898Z,1520505644.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:45.293Z,1520505645.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:45.702Z,1520505645.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:46.110Z,1520505646.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:46.501Z,1520505646.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:46.899Z,1520505646.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:47.302Z,1520505647.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:47.698Z,1520505647.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:48.110Z,1520505648.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:48.501Z,1520505648.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:48.888Z,1520505648.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:49.290Z,1520505649.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:49.708Z,1520505649.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:50.104Z,1520505650.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:50.501Z,1520505650.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:50.888Z,1520505650.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:51.287Z,1520505651.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:51.701Z,1520505651.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:52.104Z,1520505652.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:52.501Z,1520505652.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:52.890Z,1520505652.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:53.293Z,1520505653.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:53.696Z,1520505653.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:54.108Z,1520505654.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:54.506Z,1520505654.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:54.892Z,1520505654.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:55.295Z,1520505655.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:55.697Z,1520505655.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:56.100Z,1520505656.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:56.501Z,1520505656.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:56.892Z,1520505656.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:57.293Z,1520505657.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:57.701Z,1520505657.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:58.103Z,1520505658.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:58.496Z,1520505658.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:58.898Z,1520505658.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:59.290Z,1520505659.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:59.696Z,1520505659.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:40:59.700Z,1520505659.700 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T10:35:59.3Z
2018-03-08T10:40:59.700Z,1520505659.700 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T10:40:59.700Z,1520505659.700 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T10:41:00.107Z,1520505660.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:03.302Z,1520505663.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:03.442Z,1520505663.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:03.737Z,1520505663.737 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0068.lzma
2018-03-08T10:41:03.794Z,1520505663.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:04.175Z,1520505664.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:04.531Z,1520505664.531 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0068.lzma.bak
2018-03-08T10:41:04.531Z,1520505664.531 [DataOverHttps](INFO): SBD MOMSN=7984931
2018-03-08T10:41:04.601Z,1520505664.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:05.166Z,1520505665.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:05.380Z,1520505665.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:08.553Z,1520505668.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:08.678Z,1520505668.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:09.035Z,1520505669.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:09.433Z,1520505669.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:09.835Z,1520505669.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:10.231Z,1520505670.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:10.630Z,1520505670.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:13.821Z,1520505673.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:13.974Z,1520505673.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:14.309Z,1520505674.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:14.688Z,1520505674.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:15.110Z,1520505675.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:15.487Z,1520505675.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:15.918Z,1520505675.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:19.012Z,1520505679.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:19.151Z,1520505679.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:19.467Z,1520505679.467 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0069.lzma
2018-03-08T10:41:19.525Z,1520505679.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:19.887Z,1520505679.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:20.239Z,1520505680.239 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0069.lzma.bak
2018-03-08T10:41:20.239Z,1520505680.239 [DataOverHttps](INFO): SBD MOMSN=7984936
2018-03-08T10:41:20.309Z,1520505680.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:20.870Z,1520505680.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:20.873Z,1520505680.873 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T10:41:20.873Z,1520505680.873 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T10:41:20.873Z,1520505680.873 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T10:41:21.110Z,1520505681.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:24.209Z,1520505684.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:24.335Z,1520505684.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:24.694Z,1520505684.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:25.090Z,1520505685.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:25.495Z,1520505685.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:25.917Z,1520505685.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:26.318Z,1520505686.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:26.716Z,1520505686.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:27.094Z,1520505687.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:27.489Z,1520505687.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:27.891Z,1520505687.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:28.292Z,1520505688.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:28.700Z,1520505688.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:29.100Z,1520505689.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:29.504Z,1520505689.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:29.895Z,1520505689.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:30.293Z,1520505690.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:30.696Z,1520505690.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:31.097Z,1520505691.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:31.502Z,1520505691.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:31.895Z,1520505691.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:32.292Z,1520505692.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:32.707Z,1520505692.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:33.110Z,1520505693.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:33.504Z,1520505693.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:33.896Z,1520505693.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:34.291Z,1520505694.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:34.704Z,1520505694.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:35.103Z,1520505695.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:35.507Z,1520505695.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:35.896Z,1520505695.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:36.298Z,1520505696.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:36.704Z,1520505696.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:37.103Z,1520505697.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:37.497Z,1520505697.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:37.893Z,1520505697.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:38.294Z,1520505698.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:38.697Z,1520505698.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:39.110Z,1520505699.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:39.504Z,1520505699.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:39.895Z,1520505699.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:40.294Z,1520505700.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:40.742Z,1520505700.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:41.110Z,1520505701.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:41.579Z,1520505701.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:41.891Z,1520505701.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:42.294Z,1520505702.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:42.703Z,1520505702.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:43.103Z,1520505703.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:43.580Z,1520505703.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:43.893Z,1520505703.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:44.291Z,1520505704.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:44.304Z,1520505704.304 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T10:41:44.650Z,1520505704.650 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-03-08T10:41:44.650Z,1520505704.650 [DropWeight] Hardware Fault, FailCount= 1
2018-03-08T10:41:44.650Z,1520505704.650 [DropWeight](ERROR): Hardware Fault
2018-03-08T10:41:44.730Z,1520505704.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:44.745Z,1520505704.745 [CBIT](INFO): Critical error at 20180308T104144
2018-03-08T10:41:44.748Z,1520505704.748 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-03-08T10:41:44.748Z,1520505704.748 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-03-08T10:41:45.096Z,1520505705.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:45.108Z,1520505705.108 [CBIT](INFO): Critical error at 20180308T104144
2018-03-08T10:41:45.499Z,1520505705.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:45.896Z,1520505705.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:46.291Z,1520505706.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:46.706Z,1520505706.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:47.108Z,1520505707.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:47.501Z,1520505707.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:47.898Z,1520505707.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:48.298Z,1520505708.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:48.700Z,1520505708.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:49.104Z,1520505709.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:49.502Z,1520505709.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:49.895Z,1520505709.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:50.298Z,1520505710.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:50.701Z,1520505710.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:51.105Z,1520505711.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:51.504Z,1520505711.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:51.895Z,1520505711.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:52.291Z,1520505712.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:52.700Z,1520505712.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:53.104Z,1520505713.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:53.500Z,1520505713.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:53.899Z,1520505713.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:54.295Z,1520505714.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:54.700Z,1520505714.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:55.111Z,1520505715.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:55.496Z,1520505715.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:55.898Z,1520505715.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:56.296Z,1520505716.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:56.700Z,1520505716.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:57.105Z,1520505717.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:57.501Z,1520505717.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:57.895Z,1520505717.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:58.296Z,1520505718.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:58.701Z,1520505718.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:59.109Z,1520505719.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:59.499Z,1520505719.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:41:59.903Z,1520505719.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:00.287Z,1520505720.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:00.704Z,1520505720.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:01.103Z,1520505721.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:01.509Z,1520505721.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:01.901Z,1520505721.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:02.305Z,1520505722.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:02.706Z,1520505722.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:03.105Z,1520505723.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:03.510Z,1520505723.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:03.902Z,1520505723.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:04.301Z,1520505724.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:04.706Z,1520505724.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:05.122Z,1520505725.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:05.506Z,1520505725.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:05.894Z,1520505725.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:06.302Z,1520505726.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:06.704Z,1520505726.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:07.107Z,1520505727.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:07.504Z,1520505727.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:07.906Z,1520505727.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:08.308Z,1520505728.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:08.701Z,1520505728.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:09.118Z,1520505729.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:09.512Z,1520505729.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:09.887Z,1520505729.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:10.287Z,1520505730.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:10.711Z,1520505730.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:11.118Z,1520505731.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:11.508Z,1520505731.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:11.887Z,1520505731.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:12.287Z,1520505732.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:12.708Z,1520505732.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:13.115Z,1520505733.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:13.516Z,1520505733.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:13.887Z,1520505733.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:14.289Z,1520505734.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:14.688Z,1520505734.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:15.113Z,1520505735.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:15.514Z,1520505735.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:15.910Z,1520505735.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:16.283Z,1520505736.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:16.717Z,1520505736.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:17.113Z,1520505737.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:17.518Z,1520505737.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:17.887Z,1520505737.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:18.329Z,1520505738.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:18.690Z,1520505738.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:19.090Z,1520505739.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:19.487Z,1520505739.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:19.914Z,1520505739.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:20.314Z,1520505740.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:20.696Z,1520505740.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:21.115Z,1520505741.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:21.497Z,1520505741.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:24.606Z,1520505744.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:24.739Z,1520505744.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:25.098Z,1520505745.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:25.500Z,1520505745.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:25.891Z,1520505745.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:26.292Z,1520505746.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:26.669Z,1520505746.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:27.072Z,1520505747.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:27.474Z,1520505747.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:27.898Z,1520505747.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:28.299Z,1520505748.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:28.697Z,1520505748.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:29.074Z,1520505749.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:29.481Z,1520505749.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:29.882Z,1520505749.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:30.277Z,1520505750.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:30.680Z,1520505750.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:31.107Z,1520505751.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:31.486Z,1520505751.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:31.876Z,1520505751.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:32.276Z,1520505752.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:32.708Z,1520505752.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:33.106Z,1520505753.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:33.484Z,1520505753.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:33.878Z,1520505753.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:34.279Z,1520505754.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:34.707Z,1520505754.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:35.109Z,1520505755.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:35.479Z,1520505755.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:35.876Z,1520505755.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:36.363Z,1520505756.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:36.680Z,1520505756.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:37.106Z,1520505757.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:37.508Z,1520505757.508 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:37.508Z,1520505757.508 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60
2018-03-08T10:42:37.508Z,1520505757.508 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T10:42:37.510Z,1520505757.510 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:37.510Z,1520505757.510 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60
2018-03-08T10:42:37.510Z,1520505757.510 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T10:42:37.512Z,1520505757.512 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:37.512Z,1520505757.512 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 60
2018-03-08T10:42:37.512Z,1520505757.512 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T10:42:37.523Z,1520505757.523 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T10:42:37.524Z,1520505757.524 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T10:42:37.524Z,1520505757.524 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T10:42:37.889Z,1520505757.889 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T10:42:37.890Z,1520505757.890 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60
2018-03-08T10:42:37.890Z,1520505757.890 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T10:42:37.890Z,1520505757.890 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60
2018-03-08T10:42:37.890Z,1520505757.890 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T10:42:37.891Z,1520505757.891 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 60
2018-03-08T10:42:38.277Z,1520505758.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T10:42:38.278Z,1520505758.278 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:42:38.278Z,1520505758.278 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:42:38.279Z,1520505758.279 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T10:42:38.279Z,1520505758.279 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:42:38.279Z,1520505758.279 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:42:38.280Z,1520505758.280 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T10:42:38.280Z,1520505758.280 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:42:38.281Z,1520505758.281 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:42:38.684Z,1520505758.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T10:42:38.685Z,1520505758.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:39.088Z,1520505759.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T10:42:39.089Z,1520505759.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:39.490Z,1520505759.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T10:42:39.491Z,1520505759.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:39.878Z,1520505759.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T10:42:39.879Z,1520505759.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:40.282Z,1520505760.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T10:42:40.283Z,1520505760.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:40.690Z,1520505760.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T10:42:40.691Z,1520505760.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:41.091Z,1520505761.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T10:42:41.092Z,1520505761.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:41.494Z,1520505761.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T10:42:41.495Z,1520505761.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:41.881Z,1520505761.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T10:42:41.882Z,1520505761.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:42.279Z,1520505762.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T10:42:42.280Z,1520505762.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:42.687Z,1520505762.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T10:42:42.688Z,1520505762.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:43.098Z,1520505763.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T10:42:43.099Z,1520505763.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:43.491Z,1520505763.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T10:42:43.492Z,1520505763.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:43.882Z,1520505763.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T10:42:43.883Z,1520505763.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:44.279Z,1520505764.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T10:42:44.280Z,1520505764.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:44.688Z,1520505764.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T10:42:44.689Z,1520505764.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:45.098Z,1520505765.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T10:42:45.099Z,1520505765.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:45.487Z,1520505765.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T10:42:45.488Z,1520505765.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:45.879Z,1520505765.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T10:42:45.880Z,1520505765.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:46.286Z,1520505766.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T10:42:46.287Z,1520505766.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:46.698Z,1520505766.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T10:42:46.699Z,1520505766.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:47.098Z,1520505767.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T10:42:47.099Z,1520505767.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:47.488Z,1520505767.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T10:42:47.493Z,1520505767.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:47.879Z,1520505767.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T10:42:47.880Z,1520505767.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:48.282Z,1520505768.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T10:42:48.283Z,1520505768.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:48.689Z,1520505768.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T10:42:48.690Z,1520505768.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:49.096Z,1520505769.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T10:42:49.097Z,1520505769.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:49.498Z,1520505769.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T10:42:49.498Z,1520505769.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:49.884Z,1520505769.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T10:42:49.885Z,1520505769.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:50.285Z,1520505770.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T10:42:50.286Z,1520505770.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:50.694Z,1520505770.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T10:42:50.695Z,1520505770.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:51.088Z,1520505771.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T10:42:51.089Z,1520505771.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:51.488Z,1520505771.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T10:42:51.489Z,1520505771.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:51.882Z,1520505771.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T10:42:51.883Z,1520505771.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:52.278Z,1520505772.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T10:42:52.279Z,1520505772.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:52.691Z,1520505772.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T10:42:52.692Z,1520505772.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:53.087Z,1520505773.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T10:42:53.088Z,1520505773.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:53.488Z,1520505773.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T10:42:53.489Z,1520505773.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:53.879Z,1520505773.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T10:42:53.880Z,1520505773.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:54.288Z,1520505774.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T10:42:54.289Z,1520505774.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:54.690Z,1520505774.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T10:42:54.691Z,1520505774.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:55.098Z,1520505775.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T10:42:55.099Z,1520505775.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:55.491Z,1520505775.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T10:42:55.492Z,1520505775.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:55.882Z,1520505775.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T10:42:55.883Z,1520505775.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:56.284Z,1520505776.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T10:42:56.285Z,1520505776.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:56.688Z,1520505776.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T10:42:56.689Z,1520505776.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:57.087Z,1520505777.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T10:42:57.088Z,1520505777.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:57.491Z,1520505777.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T10:42:57.492Z,1520505777.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:57.877Z,1520505777.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:58.287Z,1520505778.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:58.688Z,1520505778.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:59.098Z,1520505779.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:59.487Z,1520505779.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:42:59.882Z,1520505779.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:00.286Z,1520505780.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:00.690Z,1520505780.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:01.102Z,1520505781.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:01.493Z,1520505781.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:01.883Z,1520505781.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:02.287Z,1520505782.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:02.693Z,1520505782.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:03.095Z,1520505783.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:03.491Z,1520505783.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:03.882Z,1520505783.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:04.283Z,1520505784.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:04.733Z,1520505784.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:05.129Z,1520505785.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:05.486Z,1520505785.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:05.899Z,1520505785.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:06.296Z,1520505786.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:06.691Z,1520505786.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:07.084Z,1520505787.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:07.480Z,1520505787.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:07.877Z,1520505787.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:08.282Z,1520505788.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:08.711Z,1520505788.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:09.092Z,1520505789.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:09.485Z,1520505789.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:09.890Z,1520505789.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:10.275Z,1520505790.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:10.687Z,1520505790.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:11.095Z,1520505791.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:11.483Z,1520505791.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:11.879Z,1520505791.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:12.282Z,1520505792.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:12.687Z,1520505792.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:13.094Z,1520505793.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:13.488Z,1520505793.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:13.891Z,1520505793.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:14.280Z,1520505794.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:14.688Z,1520505794.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:15.086Z,1520505795.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:15.491Z,1520505795.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:15.885Z,1520505795.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:16.287Z,1520505796.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:16.687Z,1520505796.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:17.087Z,1520505797.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:17.487Z,1520505797.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:17.880Z,1520505797.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:18.281Z,1520505798.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:18.687Z,1520505798.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:19.090Z,1520505799.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:19.488Z,1520505799.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:19.883Z,1520505799.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:20.278Z,1520505800.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:20.691Z,1520505800.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:21.088Z,1520505801.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:21.486Z,1520505801.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:21.884Z,1520505801.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:24.994Z,1520505804.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:25.142Z,1520505805.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:25.520Z,1520505805.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:25.904Z,1520505805.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:26.297Z,1520505806.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:26.693Z,1520505806.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:27.096Z,1520505807.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:27.495Z,1520505807.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:27.925Z,1520505807.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:28.310Z,1520505808.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:28.703Z,1520505808.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:29.099Z,1520505809.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:29.506Z,1520505809.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:29.899Z,1520505809.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:30.299Z,1520505810.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:30.703Z,1520505810.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:31.105Z,1520505811.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:31.511Z,1520505811.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:31.898Z,1520505811.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:32.302Z,1520505812.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:32.704Z,1520505812.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:33.103Z,1520505813.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:33.503Z,1520505813.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:33.898Z,1520505813.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:34.299Z,1520505814.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:34.707Z,1520505814.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:35.102Z,1520505815.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:35.506Z,1520505815.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:35.898Z,1520505815.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:36.294Z,1520505816.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:36.706Z,1520505816.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:37.106Z,1520505817.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:37.503Z,1520505817.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:37.898Z,1520505817.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:38.296Z,1520505818.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:38.704Z,1520505818.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:39.104Z,1520505819.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:39.503Z,1520505819.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:39.899Z,1520505819.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:40.303Z,1520505820.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:40.706Z,1520505820.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:41.104Z,1520505821.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:41.502Z,1520505821.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:41.899Z,1520505821.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:42.299Z,1520505822.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:42.703Z,1520505822.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:43.103Z,1520505823.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:43.503Z,1520505823.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:43.906Z,1520505823.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:44.302Z,1520505824.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:44.704Z,1520505824.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:45.105Z,1520505825.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:45.507Z,1520505825.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:45.900Z,1520505825.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:46.296Z,1520505826.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:46.704Z,1520505826.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:47.103Z,1520505827.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:47.503Z,1520505827.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:47.895Z,1520505827.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:48.298Z,1520505828.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:48.703Z,1520505828.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:49.107Z,1520505829.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:49.503Z,1520505829.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:49.898Z,1520505829.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:50.302Z,1520505830.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:50.704Z,1520505830.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:51.104Z,1520505831.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:51.503Z,1520505831.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:51.890Z,1520505831.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:52.302Z,1520505832.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:52.707Z,1520505832.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:53.104Z,1520505833.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:53.503Z,1520505833.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:53.898Z,1520505833.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:54.289Z,1520505834.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:54.703Z,1520505834.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:55.112Z,1520505835.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:55.508Z,1520505835.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:55.898Z,1520505835.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:56.294Z,1520505836.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:56.700Z,1520505836.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:57.110Z,1520505837.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:57.507Z,1520505837.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:57.899Z,1520505837.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:58.310Z,1520505838.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:58.750Z,1520505838.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:59.118Z,1520505839.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:59.516Z,1520505839.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:43:59.924Z,1520505839.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:00.303Z,1520505840.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:00.704Z,1520505840.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:01.122Z,1520505841.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:01.510Z,1520505841.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:01.950Z,1520505841.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:02.301Z,1520505842.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:02.707Z,1520505842.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:03.113Z,1520505843.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:03.504Z,1520505843.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:03.903Z,1520505843.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:04.301Z,1520505844.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:04.718Z,1520505844.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:05.110Z,1520505845.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:05.506Z,1520505845.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:05.901Z,1520505845.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:06.303Z,1520505846.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:06.711Z,1520505846.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:07.113Z,1520505847.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:07.509Z,1520505847.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:07.905Z,1520505847.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:08.303Z,1520505848.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:08.714Z,1520505848.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:09.114Z,1520505849.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:09.507Z,1520505849.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:09.886Z,1520505849.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:10.311Z,1520505850.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:10.713Z,1520505850.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:11.120Z,1520505851.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:11.515Z,1520505851.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:11.915Z,1520505851.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:12.293Z,1520505852.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:12.696Z,1520505852.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:13.118Z,1520505853.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:13.522Z,1520505853.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:13.892Z,1520505853.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:14.294Z,1520505854.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:14.716Z,1520505854.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:15.096Z,1520505855.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:15.518Z,1520505855.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:15.909Z,1520505855.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:16.294Z,1520505856.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:16.722Z,1520505856.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:17.104Z,1520505857.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:17.496Z,1520505857.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:17.902Z,1520505857.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:18.294Z,1520505858.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:18.697Z,1520505858.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:19.108Z,1520505859.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:19.502Z,1520505859.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:19.892Z,1520505859.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:20.293Z,1520505860.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:20.730Z,1520505860.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:21.108Z,1520505861.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:21.501Z,1520505861.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:21.898Z,1520505861.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:24.997Z,1520505864.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:25.131Z,1520505865.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:25.486Z,1520505865.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:25.882Z,1520505865.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:26.283Z,1520505866.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:26.662Z,1520505866.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:27.058Z,1520505867.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:27.482Z,1520505867.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:27.887Z,1520505867.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:28.285Z,1520505868.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:28.687Z,1520505868.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:29.082Z,1520505869.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:29.487Z,1520505869.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:29.862Z,1520505869.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:30.290Z,1520505870.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:30.668Z,1520505870.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:31.087Z,1520505871.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:31.485Z,1520505871.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:31.865Z,1520505871.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:32.258Z,1520505872.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:32.685Z,1520505872.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:33.090Z,1520505873.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:33.482Z,1520505873.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:33.866Z,1520505873.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:34.257Z,1520505874.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:34.692Z,1520505874.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:35.094Z,1520505875.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:35.495Z,1520505875.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:35.867Z,1520505875.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:36.266Z,1520505876.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:36.692Z,1520505876.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:37.092Z,1520505877.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:37.472Z,1520505877.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:37.869Z,1520505877.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:38.263Z,1520505878.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:38.691Z,1520505878.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:39.089Z,1520505879.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:39.486Z,1520505879.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:39.864Z,1520505879.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:40.267Z,1520505880.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:40.695Z,1520505880.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:41.091Z,1520505881.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:41.489Z,1520505881.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:41.868Z,1520505881.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:42.280Z,1520505882.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:42.682Z,1520505882.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:43.078Z,1520505883.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:43.471Z,1520505883.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:43.870Z,1520505883.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:44.269Z,1520505884.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:44.679Z,1520505884.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:45.080Z,1520505885.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:45.471Z,1520505885.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:45.865Z,1520505885.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:46.268Z,1520505886.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:46.675Z,1520505886.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:47.072Z,1520505887.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:47.472Z,1520505887.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:47.866Z,1520505887.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:48.269Z,1520505888.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:48.672Z,1520505888.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:49.076Z,1520505889.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:49.473Z,1520505889.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:49.869Z,1520505889.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:50.274Z,1520505890.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:50.672Z,1520505890.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:51.075Z,1520505891.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:51.476Z,1520505891.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:51.870Z,1520505891.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:52.267Z,1520505892.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:52.672Z,1520505892.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:53.087Z,1520505893.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:53.479Z,1520505893.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:53.867Z,1520505893.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:54.273Z,1520505894.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:54.680Z,1520505894.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:55.087Z,1520505895.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:55.480Z,1520505895.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:55.873Z,1520505895.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:56.278Z,1520505896.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:56.680Z,1520505896.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:57.088Z,1520505897.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:57.475Z,1520505897.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:57.868Z,1520505897.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:58.269Z,1520505898.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:58.677Z,1520505898.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:59.087Z,1520505899.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:59.481Z,1520505899.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:44:59.872Z,1520505899.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:00.271Z,1520505900.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:00.677Z,1520505900.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:01.079Z,1520505901.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:01.480Z,1520505901.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:01.874Z,1520505901.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:02.274Z,1520505902.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:02.676Z,1520505902.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:03.080Z,1520505903.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:03.475Z,1520505903.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:03.875Z,1520505903.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:04.273Z,1520505904.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:04.681Z,1520505904.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:05.081Z,1520505905.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:05.478Z,1520505905.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:05.872Z,1520505905.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:06.272Z,1520505906.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:06.684Z,1520505906.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:07.076Z,1520505907.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:07.475Z,1520505907.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:07.874Z,1520505907.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:08.270Z,1520505908.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:08.677Z,1520505908.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:09.080Z,1520505909.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:09.476Z,1520505909.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:09.872Z,1520505909.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:10.274Z,1520505910.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:10.681Z,1520505910.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:11.081Z,1520505911.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:11.477Z,1520505911.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:11.871Z,1520505911.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:12.275Z,1520505912.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:12.690Z,1520505912.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:13.087Z,1520505913.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:13.483Z,1520505913.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:13.858Z,1520505913.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:14.282Z,1520505914.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:14.683Z,1520505914.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:15.087Z,1520505915.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:15.479Z,1520505915.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:15.882Z,1520505915.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:16.258Z,1520505916.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:16.668Z,1520505916.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:17.089Z,1520505917.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:17.493Z,1520505917.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:17.866Z,1520505917.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:18.268Z,1520505918.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:18.694Z,1520505918.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:19.091Z,1520505919.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:19.491Z,1520505919.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:19.866Z,1520505919.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:20.260Z,1520505920.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:20.672Z,1520505920.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:21.075Z,1520505921.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:21.465Z,1520505921.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:21.863Z,1520505921.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:22.267Z,1520505922.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:25.377Z,1520505925.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:25.522Z,1520505925.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:25.901Z,1520505925.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:26.274Z,1520505926.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:26.675Z,1520505926.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:27.075Z,1520505927.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:27.471Z,1520505927.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:27.888Z,1520505927.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:28.280Z,1520505928.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:28.679Z,1520505928.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:29.074Z,1520505929.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:29.474Z,1520505929.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:29.874Z,1520505929.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:30.274Z,1520505930.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:30.676Z,1520505930.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:31.088Z,1520505931.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:31.480Z,1520505931.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:31.878Z,1520505931.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:32.277Z,1520505932.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:32.683Z,1520505932.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:33.093Z,1520505933.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:33.484Z,1520505933.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:33.879Z,1520505933.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:34.278Z,1520505934.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:34.683Z,1520505934.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:35.087Z,1520505935.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:35.483Z,1520505935.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:35.876Z,1520505935.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:36.287Z,1520505936.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:36.689Z,1520505936.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:37.094Z,1520505937.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:37.494Z,1520505937.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:37.879Z,1520505937.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:38.283Z,1520505938.283 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:38.283Z,1520505938.283 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61
2018-03-08T10:45:38.283Z,1520505938.283 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T10:45:38.285Z,1520505938.285 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:38.285Z,1520505938.285 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61
2018-03-08T10:45:38.285Z,1520505938.285 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T10:45:38.287Z,1520505938.287 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:38.287Z,1520505938.287 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 61
2018-03-08T10:45:38.287Z,1520505938.287 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T10:45:38.327Z,1520505938.327 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T10:45:38.327Z,1520505938.327 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T10:45:38.327Z,1520505938.327 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T10:45:38.711Z,1520505938.711 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T10:45:38.711Z,1520505938.711 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61
2018-03-08T10:45:38.712Z,1520505938.712 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T10:45:38.712Z,1520505938.712 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61
2018-03-08T10:45:38.717Z,1520505938.717 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T10:45:38.717Z,1520505938.717 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 61
2018-03-08T10:45:39.087Z,1520505939.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T10:45:39.088Z,1520505939.088 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:45:39.088Z,1520505939.088 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:45:39.088Z,1520505939.088 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T10:45:39.089Z,1520505939.089 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:45:39.089Z,1520505939.089 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:45:39.090Z,1520505939.090 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T10:45:39.090Z,1520505939.090 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:45:39.090Z,1520505939.090 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:45:39.486Z,1520505939.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T10:45:39.487Z,1520505939.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:39.880Z,1520505939.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T10:45:39.881Z,1520505939.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:40.283Z,1520505940.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T10:45:40.284Z,1520505940.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:40.684Z,1520505940.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T10:45:40.686Z,1520505940.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:41.087Z,1520505941.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T10:45:41.089Z,1520505941.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:41.486Z,1520505941.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T10:45:41.487Z,1520505941.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:41.879Z,1520505941.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T10:45:41.880Z,1520505941.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:42.280Z,1520505942.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T10:45:42.281Z,1520505942.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:42.684Z,1520505942.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T10:45:42.685Z,1520505942.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:43.090Z,1520505943.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T10:45:43.091Z,1520505943.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:43.486Z,1520505943.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T10:45:43.487Z,1520505943.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:43.871Z,1520505943.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T10:45:43.871Z,1520505943.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:44.304Z,1520505944.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T10:45:44.313Z,1520505944.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:44.683Z,1520505944.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T10:45:44.683Z,1520505944.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:45.154Z,1520505945.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-08T10:45:45.155Z,1520505945.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:45.514Z,1520505945.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T10:45:45.515Z,1520505945.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:45.875Z,1520505945.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T10:45:45.876Z,1520505945.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:46.287Z,1520505946.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T10:45:46.297Z,1520505946.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:46.689Z,1520505946.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T10:45:46.690Z,1520505946.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:47.090Z,1520505947.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T10:45:47.091Z,1520505947.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:47.490Z,1520505947.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T10:45:47.491Z,1520505947.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:47.890Z,1520505947.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T10:45:47.891Z,1520505947.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:48.320Z,1520505948.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T10:45:48.325Z,1520505948.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:48.696Z,1520505948.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T10:45:48.701Z,1520505948.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:49.088Z,1520505949.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T10:45:49.089Z,1520505949.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:49.483Z,1520505949.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T10:45:49.484Z,1520505949.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:49.878Z,1520505949.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T10:45:49.879Z,1520505949.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:50.278Z,1520505950.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T10:45:50.279Z,1520505950.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:50.683Z,1520505950.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T10:45:50.685Z,1520505950.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:51.089Z,1520505951.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T10:45:51.090Z,1520505951.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:51.487Z,1520505951.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T10:45:51.488Z,1520505951.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:51.876Z,1520505951.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T10:45:51.877Z,1520505951.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:52.277Z,1520505952.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T10:45:52.278Z,1520505952.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:52.688Z,1520505952.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T10:45:52.689Z,1520505952.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:53.088Z,1520505953.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T10:45:53.089Z,1520505953.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:53.498Z,1520505953.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T10:45:53.499Z,1520505953.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:53.886Z,1520505953.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T10:45:53.887Z,1520505953.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:54.286Z,1520505954.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T10:45:54.287Z,1520505954.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:54.691Z,1520505954.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T10:45:54.692Z,1520505954.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:55.088Z,1520505955.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T10:45:55.089Z,1520505955.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:55.487Z,1520505955.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T10:45:55.488Z,1520505955.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:55.888Z,1520505955.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T10:45:55.889Z,1520505955.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:56.284Z,1520505956.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T10:45:56.285Z,1520505956.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:56.693Z,1520505956.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T10:45:56.694Z,1520505956.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:57.094Z,1520505957.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T10:45:57.095Z,1520505957.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:57.554Z,1520505957.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T10:45:57.555Z,1520505957.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:57.879Z,1520505957.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T10:45:57.880Z,1520505957.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:58.291Z,1520505958.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:58.691Z,1520505958.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:59.094Z,1520505959.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:59.493Z,1520505959.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:45:59.879Z,1520505959.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:00.314Z,1520505960.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:00.702Z,1520505960.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:01.099Z,1520505961.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:01.503Z,1520505961.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:01.871Z,1520505961.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:02.299Z,1520505962.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:02.703Z,1520505962.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:03.104Z,1520505963.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:03.501Z,1520505963.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:03.875Z,1520505963.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:04.274Z,1520505964.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:04.688Z,1520505964.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:05.084Z,1520505965.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:05.480Z,1520505965.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:05.873Z,1520505965.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:06.273Z,1520505966.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:06.679Z,1520505966.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:07.084Z,1520505967.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:07.481Z,1520505967.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:07.877Z,1520505967.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:08.283Z,1520505968.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:08.680Z,1520505968.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:09.083Z,1520505969.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:09.483Z,1520505969.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:09.877Z,1520505969.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:10.275Z,1520505970.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:10.681Z,1520505970.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:11.084Z,1520505971.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:11.480Z,1520505971.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:11.883Z,1520505971.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:12.278Z,1520505972.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:12.680Z,1520505972.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:13.080Z,1520505973.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:13.480Z,1520505973.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:13.877Z,1520505973.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:14.283Z,1520505974.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:14.680Z,1520505974.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:15.084Z,1520505975.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:15.480Z,1520505975.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:15.875Z,1520505975.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:16.274Z,1520505976.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:16.679Z,1520505976.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:17.086Z,1520505977.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:17.486Z,1520505977.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:17.882Z,1520505977.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:18.277Z,1520505978.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:18.681Z,1520505978.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:19.085Z,1520505979.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:19.480Z,1520505979.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:19.878Z,1520505979.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:20.277Z,1520505980.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:20.687Z,1520505980.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:21.084Z,1520505981.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:21.480Z,1520505981.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:21.483Z,1520505981.483 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T10:46:21.483Z,1520505981.483 [Default:CheckIn:C.Wait] Stopped
2018-03-08T10:46:21.483Z,1520505981.483 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T10:46:21.483Z,1520505981.483 [Default:CheckIn:D] Running Loop=1
2018-03-08T10:46:21.875Z,1520505981.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:21.879Z,1520505981.879 [Default:CheckIn:D] Stopped
2018-03-08T10:46:21.879Z,1520505981.879 [Default:CheckIn:E] Running Loop=1
2018-03-08T10:46:22.274Z,1520505982.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:22.277Z,1520505982.277 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 180.617887 min 
2018-03-08T10:46:22.277Z,1520505982.277 [Default:CheckIn:E] Stopped
2018-03-08T10:46:22.277Z,1520505982.277 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T10:46:22.277Z,1520505982.277 [Default:CheckIn] Stopped
2018-03-08T10:46:22.277Z,1520505982.277 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T10:46:22.278Z,1520505982.278 [Default:CheckIn](INFO): Running loop #18
2018-03-08T10:46:22.278Z,1520505982.278 [Default:CheckIn] Running Loop=18
2018-03-08T10:46:22.278Z,1520505982.278 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T10:46:22.278Z,1520505982.278 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T10:46:25.381Z,1520505985.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:25.534Z,1520505985.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:25.867Z,1520505985.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:26.271Z,1520505986.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:26.642Z,1520505986.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:27.047Z,1520505987.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:27.463Z,1520505987.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:27.860Z,1520505987.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:28.263Z,1520505988.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:28.665Z,1520505988.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:29.054Z,1520505989.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:29.451Z,1520505989.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:29.863Z,1520505989.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:30.263Z,1520505990.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:30.660Z,1520505990.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:31.065Z,1520505991.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:31.457Z,1520505991.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:31.851Z,1520505991.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:32.255Z,1520505992.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:32.656Z,1520505992.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:33.065Z,1520505993.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:33.461Z,1520505993.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:33.856Z,1520505993.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:34.253Z,1520505994.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:34.654Z,1520505994.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:35.061Z,1520505995.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:35.471Z,1520505995.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:35.869Z,1520505995.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:36.255Z,1520505996.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:36.657Z,1520505996.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:37.052Z,1520505997.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:37.461Z,1520505997.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:37.864Z,1520505997.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:38.266Z,1520505998.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:38.667Z,1520505998.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:39.054Z,1520505999.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:39.465Z,1520505999.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:39.846Z,1520505999.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:40.275Z,1520506000.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:40.679Z,1520506000.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:41.073Z,1520506001.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:41.478Z,1520506001.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:41.850Z,1520506001.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:42.250Z,1520506002.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:42.673Z,1520506002.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:43.072Z,1520506003.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:43.454Z,1520506003.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:43.851Z,1520506003.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:44.250Z,1520506004.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:44.653Z,1520506004.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:45.079Z,1520506005.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:45.448Z,1520506005.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:45.849Z,1520506005.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:46.248Z,1520506006.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:46.679Z,1520506006.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:47.060Z,1520506007.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:47.464Z,1520506007.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:47.854Z,1520506007.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:48.254Z,1520506008.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:48.662Z,1520506008.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:49.060Z,1520506009.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:49.456Z,1520506009.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:49.850Z,1520506009.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:50.254Z,1520506010.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:50.657Z,1520506010.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:51.056Z,1520506011.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:51.462Z,1520506011.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:51.854Z,1520506011.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:52.249Z,1520506012.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:52.662Z,1520506012.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:53.057Z,1520506013.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:53.457Z,1520506013.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:53.851Z,1520506013.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:54.259Z,1520506014.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:54.656Z,1520506014.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:55.063Z,1520506015.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:55.458Z,1520506015.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:55.851Z,1520506015.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:56.250Z,1520506016.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:56.655Z,1520506016.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:57.056Z,1520506017.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:57.455Z,1520506017.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:57.858Z,1520506017.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:58.254Z,1520506018.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:58.656Z,1520506018.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:59.060Z,1520506019.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:59.462Z,1520506019.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:46:59.854Z,1520506019.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:00.258Z,1520506020.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:00.662Z,1520506020.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:01.058Z,1520506021.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:01.459Z,1520506021.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:01.850Z,1520506021.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:02.254Z,1520506022.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:02.666Z,1520506022.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:03.060Z,1520506023.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:03.459Z,1520506023.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:03.859Z,1520506023.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:04.258Z,1520506024.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:04.659Z,1520506024.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:05.061Z,1520506025.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:05.486Z,1520506025.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:05.858Z,1520506025.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:06.253Z,1520506026.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:06.662Z,1520506026.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:07.060Z,1520506027.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:07.466Z,1520506027.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:07.855Z,1520506027.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:08.253Z,1520506028.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:08.659Z,1520506028.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:09.060Z,1520506029.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:09.459Z,1520506029.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:09.855Z,1520506029.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:10.258Z,1520506030.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:10.662Z,1520506030.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:11.060Z,1520506031.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:11.491Z,1520506031.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:11.856Z,1520506031.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:12.254Z,1520506032.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:12.660Z,1520506032.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:13.060Z,1520506033.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:13.466Z,1520506033.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:13.855Z,1520506033.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:14.257Z,1520506034.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:14.660Z,1520506034.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:15.061Z,1520506035.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:15.460Z,1520506035.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:15.849Z,1520506035.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:16.251Z,1520506036.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:16.650Z,1520506036.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:17.056Z,1520506037.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:17.460Z,1520506037.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:17.859Z,1520506037.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:18.258Z,1520506038.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:18.658Z,1520506038.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:19.054Z,1520506039.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:19.447Z,1520506039.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:19.862Z,1520506039.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:20.260Z,1520506040.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:20.669Z,1520506040.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:21.054Z,1520506041.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:21.451Z,1520506041.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:21.849Z,1520506041.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:22.262Z,1520506042.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:22.653Z,1520506042.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:25.758Z,1520506045.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:25.910Z,1520506045.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:26.270Z,1520506046.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:26.653Z,1520506046.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:27.059Z,1520506047.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:27.448Z,1520506047.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:27.861Z,1520506047.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:28.269Z,1520506048.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:28.667Z,1520506048.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:29.051Z,1520506049.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:29.457Z,1520506049.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:29.854Z,1520506049.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:30.255Z,1520506050.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:30.657Z,1520506050.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:31.062Z,1520506051.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:31.460Z,1520506051.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:31.874Z,1520506051.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:32.255Z,1520506052.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:32.657Z,1520506052.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:33.057Z,1520506053.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:33.457Z,1520506053.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:33.861Z,1520506053.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:34.264Z,1520506054.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:34.664Z,1520506054.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:35.058Z,1520506055.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:35.450Z,1520506055.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:35.862Z,1520506055.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:36.258Z,1520506056.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:36.664Z,1520506056.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:37.060Z,1520506057.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:37.459Z,1520506057.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:37.851Z,1520506057.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:38.261Z,1520506058.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:38.714Z,1520506058.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:39.070Z,1520506059.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:39.464Z,1520506059.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:39.855Z,1520506059.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:40.255Z,1520506060.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:40.653Z,1520506060.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:41.064Z,1520506061.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:41.467Z,1520506061.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:41.870Z,1520506061.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:42.269Z,1520506062.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:42.664Z,1520506062.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:43.067Z,1520506063.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:43.438Z,1520506063.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:43.867Z,1520506063.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:44.266Z,1520506064.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:44.682Z,1520506064.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:45.058Z,1520506065.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:45.478Z,1520506065.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:45.848Z,1520506065.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:46.271Z,1520506066.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:46.686Z,1520506066.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:47.070Z,1520506067.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:47.510Z,1520506067.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:47.851Z,1520506067.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:48.255Z,1520506068.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:48.666Z,1520506068.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:49.102Z,1520506069.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:49.506Z,1520506069.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:49.854Z,1520506069.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:50.256Z,1520506070.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:50.664Z,1520506070.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:51.064Z,1520506071.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:51.465Z,1520506071.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:51.857Z,1520506071.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:52.256Z,1520506072.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:52.665Z,1520506072.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:53.062Z,1520506073.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:53.471Z,1520506073.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:53.855Z,1520506073.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:54.251Z,1520506074.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:54.661Z,1520506074.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:55.079Z,1520506075.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:55.500Z,1520506075.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:55.858Z,1520506075.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:56.262Z,1520506076.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:56.665Z,1520506076.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:57.067Z,1520506077.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:57.463Z,1520506077.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:57.836Z,1520506077.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:58.242Z,1520506078.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:58.645Z,1520506078.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:59.066Z,1520506079.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:59.472Z,1520506079.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:47:59.878Z,1520506079.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:00.266Z,1520506080.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:00.650Z,1520506080.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:01.043Z,1520506081.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:01.452Z,1520506081.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:01.853Z,1520506081.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:02.331Z,1520506082.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:02.659Z,1520506082.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:03.062Z,1520506083.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:03.461Z,1520506083.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:03.850Z,1520506083.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:04.258Z,1520506084.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:04.661Z,1520506084.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:05.060Z,1520506085.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:05.489Z,1520506085.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:05.862Z,1520506085.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:06.249Z,1520506086.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:06.650Z,1520506086.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:07.061Z,1520506087.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:07.490Z,1520506087.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:07.902Z,1520506087.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:08.254Z,1520506088.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:08.658Z,1520506088.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:09.053Z,1520506089.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:09.451Z,1520506089.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:09.870Z,1520506089.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:10.274Z,1520506090.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:10.664Z,1520506090.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:11.058Z,1520506091.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:11.458Z,1520506091.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:11.854Z,1520506091.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:12.258Z,1520506092.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:12.661Z,1520506092.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:13.064Z,1520506093.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:13.457Z,1520506093.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:13.851Z,1520506093.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:14.267Z,1520506094.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:14.660Z,1520506094.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:15.070Z,1520506095.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:15.461Z,1520506095.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:15.857Z,1520506095.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:16.251Z,1520506096.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:16.661Z,1520506096.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:17.065Z,1520506097.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:17.460Z,1520506097.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:17.855Z,1520506097.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:18.259Z,1520506098.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:18.660Z,1520506098.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:19.066Z,1520506099.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:19.461Z,1520506099.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:19.869Z,1520506099.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:20.311Z,1520506100.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:20.705Z,1520506100.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:21.064Z,1520506101.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:21.461Z,1520506101.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:21.843Z,1520506101.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:22.243Z,1520506102.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:22.659Z,1520506102.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:23.060Z,1520506103.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:26.470Z,1520506106.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:26.606Z,1520506106.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:26.954Z,1520506106.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:27.335Z,1520506107.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:27.762Z,1520506107.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:28.160Z,1520506108.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:28.566Z,1520506108.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:28.957Z,1520506108.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:29.358Z,1520506109.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:29.759Z,1520506109.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:30.155Z,1520506110.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:30.531Z,1520506110.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:30.961Z,1520506110.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:31.354Z,1520506111.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:31.755Z,1520506111.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:32.138Z,1520506112.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:32.542Z,1520506112.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:32.981Z,1520506112.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:33.347Z,1520506113.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:33.770Z,1520506113.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:34.150Z,1520506114.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:34.550Z,1520506114.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:34.943Z,1520506114.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:35.338Z,1520506115.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:35.742Z,1520506115.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:36.142Z,1520506116.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:36.541Z,1520506116.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:36.945Z,1520506116.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:37.349Z,1520506117.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:37.745Z,1520506117.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:38.142Z,1520506118.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:38.546Z,1520506118.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:38.942Z,1520506118.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:39.339Z,1520506119.339 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:39.339Z,1520506119.339 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62
2018-03-08T10:48:39.339Z,1520506119.339 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T10:48:39.341Z,1520506119.341 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:39.341Z,1520506119.341 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62
2018-03-08T10:48:39.341Z,1520506119.341 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T10:48:39.342Z,1520506119.342 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:39.343Z,1520506119.343 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 62
2018-03-08T10:48:39.343Z,1520506119.343 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T10:48:39.354Z,1520506119.354 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T10:48:39.354Z,1520506119.354 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T10:48:39.354Z,1520506119.354 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T10:48:39.759Z,1520506119.759 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T10:48:39.759Z,1520506119.759 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62
2018-03-08T10:48:39.760Z,1520506119.760 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T10:48:39.760Z,1520506119.760 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62
2018-03-08T10:48:39.760Z,1520506119.760 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T10:48:39.760Z,1520506119.760 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 62
2018-03-08T10:48:40.151Z,1520506120.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T10:48:40.151Z,1520506120.151 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:48:40.151Z,1520506120.151 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:48:40.152Z,1520506120.152 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T10:48:40.152Z,1520506120.152 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:48:40.153Z,1520506120.153 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:48:40.153Z,1520506120.153 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T10:48:40.153Z,1520506120.153 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:48:40.154Z,1520506120.154 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:48:40.556Z,1520506120.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T10:48:40.557Z,1520506120.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:40.950Z,1520506120.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T10:48:40.951Z,1520506120.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:41.345Z,1520506121.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T10:48:41.346Z,1520506121.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:41.750Z,1520506121.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T10:48:41.751Z,1520506121.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:42.149Z,1520506122.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T10:48:42.150Z,1520506122.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:42.542Z,1520506122.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T10:48:42.543Z,1520506122.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:42.902Z,1520506122.902 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T10:48:42.902Z,1520506122.902 [NAL9602] Data Fault, FailCount= 3
2018-03-08T10:48:42.902Z,1520506122.902 [NAL9602](ERROR): Data Fault
2018-03-08T10:48:42.958Z,1520506122.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T10:48:42.959Z,1520506122.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:42.996Z,1520506122.996 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T10:48:43.306Z,1520506123.306 [NAL9602](INFO): Powering down
2018-03-08T10:48:43.355Z,1520506123.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T10:48:43.356Z,1520506123.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:43.739Z,1520506123.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T10:48:43.740Z,1520506123.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:44.134Z,1520506124.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T10:48:44.135Z,1520506124.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:44.181Z,1520506124.181 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T10:48:44.181Z,1520506124.181 [NAL9602] No Fault, FailCount= 3
2018-03-08T10:48:44.538Z,1520506124.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T10:48:44.539Z,1520506124.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:44.945Z,1520506124.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T10:48:44.946Z,1520506124.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:45.347Z,1520506125.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T10:48:45.348Z,1520506125.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:45.745Z,1520506125.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T10:48:45.746Z,1520506125.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:46.154Z,1520506126.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T10:48:46.155Z,1520506126.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:46.535Z,1520506126.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T10:48:46.536Z,1520506126.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:46.941Z,1520506126.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T10:48:46.942Z,1520506126.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:47.339Z,1520506127.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T10:48:47.340Z,1520506127.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:47.740Z,1520506127.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T10:48:47.741Z,1520506127.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:48.141Z,1520506128.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T10:48:48.142Z,1520506128.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:48.538Z,1520506128.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T10:48:48.539Z,1520506128.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:48.934Z,1520506128.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T10:48:48.935Z,1520506128.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:49.340Z,1520506129.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T10:48:49.341Z,1520506129.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:49.735Z,1520506129.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T10:48:49.736Z,1520506129.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:50.137Z,1520506130.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T10:48:50.138Z,1520506130.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:50.540Z,1520506130.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T10:48:50.541Z,1520506130.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:50.938Z,1520506130.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T10:48:50.939Z,1520506130.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:51.340Z,1520506131.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T10:48:51.341Z,1520506131.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:51.746Z,1520506131.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T10:48:51.747Z,1520506131.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:52.139Z,1520506132.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T10:48:52.140Z,1520506132.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:52.550Z,1520506132.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T10:48:52.551Z,1520506132.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:52.946Z,1520506132.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T10:48:52.947Z,1520506132.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:53.338Z,1520506133.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T10:48:53.339Z,1520506133.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:53.737Z,1520506133.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T10:48:53.738Z,1520506133.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:54.143Z,1520506134.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T10:48:54.144Z,1520506134.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:54.546Z,1520506134.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T10:48:54.547Z,1520506134.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:54.951Z,1520506134.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T10:48:54.952Z,1520506134.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:55.342Z,1520506135.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T10:48:55.343Z,1520506135.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:55.746Z,1520506135.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T10:48:55.747Z,1520506135.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:56.144Z,1520506136.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T10:48:56.145Z,1520506136.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:56.543Z,1520506136.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T10:48:56.544Z,1520506136.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:56.942Z,1520506136.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T10:48:56.943Z,1520506136.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:57.349Z,1520506137.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T10:48:57.350Z,1520506137.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:57.758Z,1520506137.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T10:48:57.759Z,1520506137.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:58.149Z,1520506138.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T10:48:58.150Z,1520506138.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:58.542Z,1520506138.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T10:48:58.543Z,1520506138.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:58.935Z,1520506138.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T10:48:58.935Z,1520506138.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:59.336Z,1520506139.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T10:48:59.337Z,1520506139.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:48:59.739Z,1520506139.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:00.142Z,1520506140.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:00.541Z,1520506140.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:00.942Z,1520506140.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:01.334Z,1520506141.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:01.739Z,1520506141.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:02.141Z,1520506142.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:02.542Z,1520506142.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:02.942Z,1520506142.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:03.341Z,1520506143.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:03.742Z,1520506143.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:04.139Z,1520506144.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:04.539Z,1520506144.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:04.941Z,1520506144.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:05.337Z,1520506145.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:05.739Z,1520506145.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:06.142Z,1520506146.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:06.551Z,1520506146.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:06.943Z,1520506146.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:07.343Z,1520506147.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:07.741Z,1520506147.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:08.147Z,1520506148.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:08.540Z,1520506148.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:08.939Z,1520506148.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:09.343Z,1520506149.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:09.743Z,1520506149.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:10.154Z,1520506150.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:10.564Z,1520506150.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:10.947Z,1520506150.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:11.350Z,1520506151.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:11.753Z,1520506151.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:12.142Z,1520506152.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:12.555Z,1520506152.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:12.929Z,1520506152.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:13.331Z,1520506153.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:13.706Z,1520506153.706 [NAL9602](INFO): Powering up NAL9602
2018-03-08T10:49:13.755Z,1520506153.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:14.138Z,1520506154.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:14.529Z,1520506154.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:14.935Z,1520506154.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:15.338Z,1520506155.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:15.729Z,1520506155.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:16.139Z,1520506156.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:16.537Z,1520506156.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:16.930Z,1520506156.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:17.336Z,1520506157.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:17.736Z,1520506157.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:18.139Z,1520506158.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:18.539Z,1520506158.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:18.939Z,1520506158.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:19.338Z,1520506159.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:19.735Z,1520506159.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:20.139Z,1520506160.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:20.539Z,1520506160.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:20.938Z,1520506160.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:21.336Z,1520506161.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:21.739Z,1520506161.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:22.136Z,1520506162.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:22.545Z,1520506162.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:22.983Z,1520506162.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:23.370Z,1520506163.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:26.453Z,1520506166.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:26.599Z,1520506166.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:26.926Z,1520506166.926 [NAL9602](INFO): NAL9602 initialized
2018-03-08T10:49:26.979Z,1520506166.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:27.358Z,1520506167.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:27.783Z,1520506167.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:28.168Z,1520506168.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:28.572Z,1520506168.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:28.952Z,1520506168.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:29.357Z,1520506169.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:29.760Z,1520506169.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:30.159Z,1520506170.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:30.562Z,1520506170.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:30.992Z,1520506170.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:31.389Z,1520506171.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:31.765Z,1520506171.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:32.166Z,1520506172.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:32.565Z,1520506172.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:32.964Z,1520506172.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:33.362Z,1520506173.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:33.778Z,1520506173.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:34.171Z,1520506174.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:34.573Z,1520506174.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:34.969Z,1520506174.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:35.378Z,1520506175.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:35.775Z,1520506175.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:36.164Z,1520506176.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:36.579Z,1520506176.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:36.978Z,1520506176.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:37.379Z,1520506177.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:37.766Z,1520506177.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:38.170Z,1520506178.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:38.571Z,1520506178.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:38.978Z,1520506178.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:39.373Z,1520506179.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:39.763Z,1520506179.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:40.165Z,1520506180.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:40.570Z,1520506180.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:40.969Z,1520506180.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:41.372Z,1520506181.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:41.762Z,1520506181.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:42.171Z,1520506182.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:42.587Z,1520506182.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:42.975Z,1520506182.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:43.383Z,1520506183.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:43.777Z,1520506183.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:44.185Z,1520506184.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:44.572Z,1520506184.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:44.988Z,1520506184.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:45.390Z,1520506185.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:45.767Z,1520506185.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:46.189Z,1520506186.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:46.581Z,1520506186.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:46.991Z,1520506186.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:47.385Z,1520506187.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:47.764Z,1520506187.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:48.199Z,1520506188.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:48.595Z,1520506188.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:48.958Z,1520506188.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:49.359Z,1520506189.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:49.757Z,1520506189.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:50.159Z,1520506190.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:50.560Z,1520506190.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:50.990Z,1520506190.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:51.378Z,1520506191.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:51.765Z,1520506191.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:52.170Z,1520506192.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:52.574Z,1520506192.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:52.972Z,1520506192.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:53.378Z,1520506193.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:53.772Z,1520506193.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:54.164Z,1520506194.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:54.572Z,1520506194.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:54.982Z,1520506194.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:55.375Z,1520506195.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:55.765Z,1520506195.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:56.171Z,1520506196.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:56.571Z,1520506196.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:56.977Z,1520506196.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:57.382Z,1520506197.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:57.765Z,1520506197.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:58.169Z,1520506198.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:58.583Z,1520506198.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:58.980Z,1520506198.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:59.381Z,1520506199.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:49:59.780Z,1520506199.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:00.163Z,1520506200.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:00.584Z,1520506200.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:01.000Z,1520506201.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:01.386Z,1520506201.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:01.767Z,1520506201.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:02.160Z,1520506202.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:02.562Z,1520506202.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:02.959Z,1520506202.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:03.359Z,1520506203.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:03.787Z,1520506203.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:04.171Z,1520506204.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:04.573Z,1520506204.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:04.959Z,1520506204.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:05.359Z,1520506205.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:05.770Z,1520506205.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:06.161Z,1520506206.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:06.570Z,1520506206.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:06.974Z,1520506206.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:07.372Z,1520506207.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:07.761Z,1520506207.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:08.174Z,1520506208.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:08.579Z,1520506208.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:08.977Z,1520506208.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:09.382Z,1520506209.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:09.765Z,1520506209.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:10.161Z,1520506210.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:10.578Z,1520506210.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:10.983Z,1520506210.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:11.381Z,1520506211.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:11.779Z,1520506211.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:12.171Z,1520506212.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:12.582Z,1520506212.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:12.979Z,1520506212.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:13.399Z,1520506213.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:13.786Z,1520506213.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:14.254Z,1520506214.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:14.552Z,1520506214.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:14.979Z,1520506214.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:15.357Z,1520506215.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:15.768Z,1520506215.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:16.172Z,1520506216.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:16.564Z,1520506216.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:16.961Z,1520506216.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:17.359Z,1520506217.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:17.759Z,1520506217.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:18.160Z,1520506218.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:18.561Z,1520506218.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:18.972Z,1520506218.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:19.361Z,1520506219.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:19.760Z,1520506219.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:20.160Z,1520506220.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:20.561Z,1520506220.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:20.972Z,1520506220.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:21.365Z,1520506221.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:21.760Z,1520506221.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:22.162Z,1520506222.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:22.565Z,1520506222.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:22.969Z,1520506222.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:23.365Z,1520506223.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:26.474Z,1520506226.474 [BPC1](ERROR): Bank B: No match for stick 5 serial number:1717 in the onboard configuration file.
2018-03-08T10:50:26.474Z,1520506226.474 [BPC1](ERROR): Failed to parse Bank B battery data
2018-03-08T10:50:26.474Z,1520506226.474 [BPC1] Data Fault, FailCount= 1
2018-03-08T10:50:26.474Z,1520506226.474 [BPC1](ERROR): Data Fault
2018-03-08T10:50:26.522Z,1520506226.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:26.549Z,1520506226.549 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-08T10:50:26.658Z,1520506226.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:27.032Z,1520506227.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:27.431Z,1520506227.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:27.472Z,1520506227.472 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-08T10:50:27.472Z,1520506227.472 [BPC1] No Fault, FailCount= 1
2018-03-08T10:50:27.890Z,1520506227.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:28.228Z,1520506228.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:28.617Z,1520506228.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:29.023Z,1520506229.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:29.418Z,1520506229.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:29.824Z,1520506229.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:30.234Z,1520506230.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:30.631Z,1520506230.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:31.023Z,1520506231.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:31.426Z,1520506231.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:31.820Z,1520506231.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:32.222Z,1520506232.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:32.628Z,1520506232.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:33.032Z,1520506233.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:33.456Z,1520506233.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:33.826Z,1520506233.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:34.223Z,1520506234.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:34.622Z,1520506234.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:35.019Z,1520506235.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:35.423Z,1520506235.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:35.830Z,1520506235.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:36.232Z,1520506236.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:36.629Z,1520506236.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:37.022Z,1520506237.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:37.421Z,1520506237.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:37.822Z,1520506237.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:38.219Z,1520506238.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:38.632Z,1520506238.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:39.031Z,1520506239.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:39.432Z,1520506239.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:39.827Z,1520506239.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:40.226Z,1520506240.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:40.624Z,1520506240.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:41.023Z,1520506241.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:41.418Z,1520506241.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:41.838Z,1520506241.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:42.231Z,1520506242.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:42.632Z,1520506242.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:43.023Z,1520506243.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:43.422Z,1520506243.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:43.820Z,1520506243.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:44.218Z,1520506244.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:44.635Z,1520506244.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:45.037Z,1520506245.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:45.482Z,1520506245.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:45.842Z,1520506245.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:46.227Z,1520506246.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:46.617Z,1520506246.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:47.020Z,1520506247.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:47.420Z,1520506247.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:47.827Z,1520506247.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:48.231Z,1520506248.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:48.634Z,1520506248.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:49.036Z,1520506249.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:49.420Z,1520506249.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:49.819Z,1520506249.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:50.222Z,1520506250.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:50.638Z,1520506250.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:51.034Z,1520506251.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:51.431Z,1520506251.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:51.826Z,1520506251.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:52.222Z,1520506252.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:52.627Z,1520506252.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:53.024Z,1520506253.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:53.420Z,1520506253.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:53.830Z,1520506253.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:54.239Z,1520506254.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:54.631Z,1520506254.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:55.024Z,1520506255.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:55.422Z,1520506255.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:55.823Z,1520506255.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:56.226Z,1520506256.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:56.632Z,1520506256.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:57.033Z,1520506257.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:57.438Z,1520506257.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:57.835Z,1520506257.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:58.274Z,1520506258.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:58.626Z,1520506258.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:59.025Z,1520506259.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:59.423Z,1520506259.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:50:59.833Z,1520506259.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:00.235Z,1520506260.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:00.629Z,1520506260.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:01.026Z,1520506261.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:01.424Z,1520506261.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:01.830Z,1520506261.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:02.221Z,1520506262.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:02.638Z,1520506262.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:03.032Z,1520506263.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:03.429Z,1520506263.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:03.823Z,1520506263.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:04.226Z,1520506264.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:04.626Z,1520506264.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:05.015Z,1520506265.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:05.428Z,1520506265.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:05.836Z,1520506265.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:06.232Z,1520506266.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:06.632Z,1520506266.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:07.030Z,1520506267.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:07.429Z,1520506267.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:07.826Z,1520506267.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:08.209Z,1520506268.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:08.635Z,1520506268.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:09.040Z,1520506269.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:09.446Z,1520506269.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:09.814Z,1520506269.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:10.259Z,1520506270.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:10.645Z,1520506270.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:11.017Z,1520506271.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:11.422Z,1520506271.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:11.844Z,1520506271.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:12.242Z,1520506272.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:12.644Z,1520506272.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:13.015Z,1520506273.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:13.412Z,1520506273.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:13.822Z,1520506273.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:14.220Z,1520506274.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:14.617Z,1520506274.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:15.041Z,1520506275.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:15.451Z,1520506275.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:15.816Z,1520506275.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:16.217Z,1520506276.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:16.619Z,1520506276.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:17.015Z,1520506277.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:17.423Z,1520506277.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:17.853Z,1520506277.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:18.225Z,1520506278.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:18.632Z,1520506278.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:19.026Z,1520506279.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:19.420Z,1520506279.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:19.827Z,1520506279.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:20.222Z,1520506280.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:20.633Z,1520506280.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:21.028Z,1520506281.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:21.434Z,1520506281.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:21.826Z,1520506281.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:22.227Z,1520506282.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:22.629Z,1520506282.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:22.632Z,1520506282.632 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T10:46:22.3Z
2018-03-08T10:51:22.632Z,1520506282.632 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T10:51:22.632Z,1520506282.632 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T10:51:23.066Z,1520506283.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:23.538Z,1520506283.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:26.573Z,1520506286.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:26.694Z,1520506286.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:27.006Z,1520506287.006 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20180308T074127/Courier0072.lzma
2018-03-08T10:51:27.074Z,1520506287.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:27.443Z,1520506287.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:27.799Z,1520506287.799 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0072.lzma.bak
2018-03-08T10:51:27.799Z,1520506287.799 [DataOverHttps](INFO): SBD MOMSN=7984994
2018-03-08T10:51:27.857Z,1520506287.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:28.426Z,1520506288.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:28.649Z,1520506288.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:31.787Z,1520506291.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:31.923Z,1520506291.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:32.292Z,1520506292.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:32.681Z,1520506292.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:33.085Z,1520506293.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:33.486Z,1520506293.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:33.892Z,1520506293.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:37.042Z,1520506297.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:37.214Z,1520506297.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:37.542Z,1520506297.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:37.932Z,1520506297.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:38.336Z,1520506298.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:38.740Z,1520506298.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:39.143Z,1520506299.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:42.934Z,1520506302.934 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:42.934Z,1520506302.934 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63
2018-03-08T10:51:42.934Z,1520506302.934 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T10:51:42.936Z,1520506302.936 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:42.945Z,1520506302.945 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63
2018-03-08T10:51:42.945Z,1520506302.945 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T10:51:42.947Z,1520506302.947 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:42.947Z,1520506302.947 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 63
2018-03-08T10:51:42.947Z,1520506302.947 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T10:51:43.015Z,1520506303.015 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T10:51:43.015Z,1520506303.015 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T10:51:43.015Z,1520506303.015 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T10:51:43.146Z,1520506303.146 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T10:51:43.146Z,1520506303.146 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63
2018-03-08T10:51:43.146Z,1520506303.146 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T10:51:43.146Z,1520506303.146 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63
2018-03-08T10:51:43.147Z,1520506303.147 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T10:51:43.147Z,1520506303.147 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 63
2018-03-08T10:51:43.442Z,1520506303.442 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0073.lzma
2018-03-08T10:51:43.507Z,1520506303.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T10:51:43.507Z,1520506303.507 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:51:43.508Z,1520506303.508 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:51:43.508Z,1520506303.508 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T10:51:43.513Z,1520506303.513 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:51:43.513Z,1520506303.513 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:51:43.514Z,1520506303.514 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T10:51:43.514Z,1520506303.514 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:51:43.514Z,1520506303.514 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:51:43.911Z,1520506303.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2018-03-08T10:51:43.912Z,1520506303.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:44.231Z,1520506304.231 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0073.lzma.bak
2018-03-08T10:51:44.231Z,1520506304.231 [DataOverHttps](INFO): SBD MOMSN=7985002
2018-03-08T10:51:44.287Z,1520506304.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.4 s old, using for 20.0 s.
2018-03-08T10:51:44.288Z,1520506304.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:44.313Z,1520506304.313 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T10:51:44.937Z,1520506304.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T10:51:44.938Z,1520506304.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:44.941Z,1520506304.941 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T10:51:44.941Z,1520506304.941 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T10:51:44.941Z,1520506304.941 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T10:51:45.098Z,1520506305.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2018-03-08T10:51:45.099Z,1520506305.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:48.638Z,1520506308.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T10:51:48.639Z,1520506308.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:48.783Z,1520506308.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2018-03-08T10:51:48.784Z,1520506308.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:49.140Z,1520506309.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2018-03-08T10:51:49.145Z,1520506309.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:49.563Z,1520506309.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2018-03-08T10:51:49.564Z,1520506309.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:49.942Z,1520506309.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2018-03-08T10:51:49.942Z,1520506309.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:50.307Z,1520506310.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2018-03-08T10:51:50.308Z,1520506310.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:50.716Z,1520506310.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2018-03-08T10:51:50.724Z,1520506310.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:51.118Z,1520506311.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2018-03-08T10:51:51.119Z,1520506311.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:51.524Z,1520506311.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2018-03-08T10:51:51.542Z,1520506311.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:51.913Z,1520506311.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2018-03-08T10:51:51.914Z,1520506311.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:52.314Z,1520506312.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2018-03-08T10:51:52.315Z,1520506312.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:52.718Z,1520506312.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2018-03-08T10:51:52.719Z,1520506312.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:53.113Z,1520506313.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2018-03-08T10:51:53.114Z,1520506313.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:53.518Z,1520506313.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2018-03-08T10:51:53.519Z,1520506313.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:53.920Z,1520506313.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2018-03-08T10:51:53.921Z,1520506313.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:54.316Z,1520506314.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2018-03-08T10:51:54.317Z,1520506314.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:54.714Z,1520506314.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2018-03-08T10:51:54.715Z,1520506314.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:55.111Z,1520506315.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2018-03-08T10:51:55.112Z,1520506315.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:55.513Z,1520506315.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2018-03-08T10:51:55.514Z,1520506315.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:55.922Z,1520506315.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2018-03-08T10:51:55.923Z,1520506315.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:56.320Z,1520506316.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2018-03-08T10:51:56.321Z,1520506316.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:56.719Z,1520506316.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2018-03-08T10:51:56.720Z,1520506316.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:57.118Z,1520506317.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2018-03-08T10:51:57.119Z,1520506317.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:57.514Z,1520506317.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2018-03-08T10:51:57.515Z,1520506317.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:57.915Z,1520506317.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2018-03-08T10:51:57.916Z,1520506317.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:58.308Z,1520506318.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2018-03-08T10:51:58.309Z,1520506318.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:58.718Z,1520506318.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-03-08T10:51:58.719Z,1520506318.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:59.121Z,1520506319.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-03-08T10:51:59.122Z,1520506319.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:59.519Z,1520506319.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-03-08T10:51:59.520Z,1520506319.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:51:59.918Z,1520506319.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-03-08T10:51:59.919Z,1520506319.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:00.314Z,1520506320.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-03-08T10:52:00.315Z,1520506320.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:00.715Z,1520506320.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-03-08T10:52:00.716Z,1520506320.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:01.113Z,1520506321.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-03-08T10:52:01.114Z,1520506321.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:01.526Z,1520506321.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-03-08T10:52:01.527Z,1520506321.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:01.958Z,1520506321.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-03-08T10:52:01.959Z,1520506321.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:02.357Z,1520506322.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-03-08T10:52:02.358Z,1520506322.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:02.714Z,1520506322.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-03-08T10:52:02.715Z,1520506322.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:03.119Z,1520506323.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:03.521Z,1520506323.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:03.926Z,1520506323.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:04.326Z,1520506324.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:04.713Z,1520506324.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:05.114Z,1520506325.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:05.521Z,1520506325.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:05.929Z,1520506325.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:06.330Z,1520506326.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:06.712Z,1520506326.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:07.115Z,1520506327.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:07.529Z,1520506327.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:07.921Z,1520506327.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:08.323Z,1520506328.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:08.718Z,1520506328.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:09.118Z,1520506329.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:09.524Z,1520506329.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:09.927Z,1520506329.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:10.337Z,1520506330.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:10.717Z,1520506330.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:11.152Z,1520506331.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:11.525Z,1520506331.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:11.924Z,1520506331.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:12.321Z,1520506332.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:12.715Z,1520506332.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:13.120Z,1520506333.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:13.533Z,1520506333.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:13.935Z,1520506333.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:14.337Z,1520506334.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:14.731Z,1520506334.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:15.120Z,1520506335.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:15.528Z,1520506335.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:15.925Z,1520506335.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:16.327Z,1520506336.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:16.714Z,1520506336.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:17.129Z,1520506337.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:17.529Z,1520506337.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:17.924Z,1520506337.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:18.334Z,1520506338.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:18.698Z,1520506338.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:19.130Z,1520506339.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:19.535Z,1520506339.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:19.930Z,1520506339.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:20.330Z,1520506340.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:20.754Z,1520506340.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:21.107Z,1520506341.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:21.528Z,1520506341.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:21.930Z,1520506341.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:22.322Z,1520506342.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:22.708Z,1520506342.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:23.110Z,1520506343.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:23.534Z,1520506343.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:23.932Z,1520506343.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:24.333Z,1520506344.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:24.710Z,1520506344.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:25.112Z,1520506345.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:25.538Z,1520506345.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:25.937Z,1520506345.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:26.342Z,1520506346.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:26.724Z,1520506346.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:27.141Z,1520506347.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:27.519Z,1520506347.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:27.923Z,1520506347.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:28.323Z,1520506348.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:28.714Z,1520506348.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:29.113Z,1520506349.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:29.520Z,1520506349.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:29.923Z,1520506349.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:30.323Z,1520506350.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:30.711Z,1520506350.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:31.111Z,1520506351.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:31.524Z,1520506351.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:31.921Z,1520506351.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:32.319Z,1520506352.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:32.715Z,1520506352.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:33.118Z,1520506353.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:33.520Z,1520506353.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:33.924Z,1520506353.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:34.331Z,1520506354.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:34.711Z,1520506354.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:35.114Z,1520506355.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:35.517Z,1520506355.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:35.920Z,1520506355.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:36.324Z,1520506356.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:36.723Z,1520506356.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:37.117Z,1520506357.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:37.523Z,1520506357.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:37.915Z,1520506357.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:38.319Z,1520506358.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:38.734Z,1520506358.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:39.138Z,1520506359.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:39.558Z,1520506359.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:39.910Z,1520506359.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:40.310Z,1520506360.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:40.710Z,1520506360.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:41.109Z,1520506361.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:41.536Z,1520506361.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:41.938Z,1520506361.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:42.337Z,1520506362.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:42.703Z,1520506362.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:43.110Z,1520506363.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:43.537Z,1520506363.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:43.914Z,1520506363.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:44.330Z,1520506364.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:44.719Z,1520506364.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:45.113Z,1520506365.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:45.521Z,1520506365.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:48.966Z,1520506368.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:49.103Z,1520506369.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:49.457Z,1520506369.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:49.831Z,1520506369.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:50.238Z,1520506370.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:50.664Z,1520506370.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:51.074Z,1520506371.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:51.447Z,1520506371.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:51.886Z,1520506371.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:52.255Z,1520506372.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:52.643Z,1520506372.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:53.046Z,1520506373.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:53.442Z,1520506373.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:53.855Z,1520506373.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:54.248Z,1520506374.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:54.648Z,1520506374.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:55.035Z,1520506375.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:55.442Z,1520506375.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:55.838Z,1520506375.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:56.246Z,1520506376.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:56.649Z,1520506376.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:57.051Z,1520506377.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:57.448Z,1520506377.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:57.843Z,1520506377.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:58.238Z,1520506378.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:58.647Z,1520506378.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:59.043Z,1520506379.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:59.442Z,1520506379.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:52:59.848Z,1520506379.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:00.251Z,1520506380.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:00.649Z,1520506380.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:01.047Z,1520506381.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:01.450Z,1520506381.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:01.847Z,1520506381.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:02.251Z,1520506382.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:02.659Z,1520506382.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:03.058Z,1520506383.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:03.459Z,1520506383.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:03.849Z,1520506383.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:04.273Z,1520506384.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:04.649Z,1520506384.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:05.046Z,1520506385.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:05.425Z,1520506385.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:05.850Z,1520506385.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:06.259Z,1520506386.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:06.658Z,1520506386.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:07.027Z,1520506387.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:07.434Z,1520506387.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:07.838Z,1520506387.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:08.231Z,1520506388.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:08.665Z,1520506388.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:09.061Z,1520506389.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:09.458Z,1520506389.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:09.858Z,1520506389.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:10.238Z,1520506390.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:10.631Z,1520506390.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:11.038Z,1520506391.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:11.437Z,1520506391.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:11.863Z,1520506391.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:12.264Z,1520506392.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:12.667Z,1520506392.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:13.046Z,1520506393.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:13.435Z,1520506393.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:13.838Z,1520506393.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:14.236Z,1520506394.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:14.666Z,1520506394.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:15.065Z,1520506395.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:15.468Z,1520506395.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:15.846Z,1520506395.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:16.251Z,1520506396.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:16.641Z,1520506396.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:17.067Z,1520506397.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:17.443Z,1520506397.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:17.846Z,1520506397.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:18.254Z,1520506398.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:18.647Z,1520506398.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:19.041Z,1520506399.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:19.441Z,1520506399.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:19.843Z,1520506399.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:20.245Z,1520506400.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:20.644Z,1520506400.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:21.048Z,1520506401.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:21.443Z,1520506401.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:21.841Z,1520506401.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:22.242Z,1520506402.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:22.637Z,1520506402.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:23.039Z,1520506403.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:23.439Z,1520506403.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:23.845Z,1520506403.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:24.251Z,1520506404.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:24.645Z,1520506404.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:25.037Z,1520506405.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:25.443Z,1520506405.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:25.846Z,1520506405.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:26.241Z,1520506406.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:26.646Z,1520506406.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:27.049Z,1520506407.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:27.444Z,1520506407.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:27.841Z,1520506407.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:28.249Z,1520506408.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:28.659Z,1520506408.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:29.040Z,1520506409.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:29.449Z,1520506409.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:29.875Z,1520506409.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:30.251Z,1520506410.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:30.652Z,1520506410.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:31.047Z,1520506411.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:31.441Z,1520506411.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:31.843Z,1520506411.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:32.242Z,1520506412.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:32.649Z,1520506412.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:33.058Z,1520506413.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:33.451Z,1520506413.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:33.839Z,1520506413.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:34.248Z,1520506414.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:34.639Z,1520506414.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:35.042Z,1520506415.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:35.443Z,1520506415.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:35.848Z,1520506415.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:36.258Z,1520506416.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:36.653Z,1520506416.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:37.043Z,1520506417.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:37.438Z,1520506417.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:37.843Z,1520506417.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:38.239Z,1520506418.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:38.648Z,1520506418.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:39.053Z,1520506419.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:39.448Z,1520506419.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:39.845Z,1520506419.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:40.246Z,1520506420.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:40.652Z,1520506420.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:41.071Z,1520506421.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:41.445Z,1520506421.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:41.863Z,1520506421.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:42.296Z,1520506422.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:42.698Z,1520506422.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:43.067Z,1520506423.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:43.435Z,1520506423.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:43.878Z,1520506423.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:44.235Z,1520506424.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:44.662Z,1520506424.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:45.044Z,1520506425.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:45.464Z,1520506425.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:45.871Z,1520506425.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:48.970Z,1520506428.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:49.108Z,1520506429.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:49.465Z,1520506429.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:49.865Z,1520506429.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:50.267Z,1520506430.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:50.640Z,1520506430.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:51.042Z,1520506431.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:51.441Z,1520506431.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:51.862Z,1520506431.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:52.270Z,1520506432.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:52.665Z,1520506432.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:53.039Z,1520506433.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:53.482Z,1520506433.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:53.878Z,1520506433.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:54.250Z,1520506434.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:54.645Z,1520506434.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:55.070Z,1520506435.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:55.487Z,1520506435.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:55.867Z,1520506435.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:56.250Z,1520506436.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:56.646Z,1520506436.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:57.046Z,1520506437.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:57.447Z,1520506437.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:57.851Z,1520506437.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:58.252Z,1520506438.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:58.649Z,1520506438.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:59.045Z,1520506439.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:59.445Z,1520506439.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:53:59.845Z,1520506439.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:00.246Z,1520506440.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:00.698Z,1520506440.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:01.052Z,1520506441.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:01.449Z,1520506441.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:01.842Z,1520506441.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:02.236Z,1520506442.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:02.643Z,1520506442.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:03.036Z,1520506443.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:03.467Z,1520506443.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:03.849Z,1520506443.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:04.249Z,1520506444.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:04.645Z,1520506444.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:05.043Z,1520506445.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:05.448Z,1520506445.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:05.854Z,1520506445.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:06.275Z,1520506446.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:06.670Z,1520506446.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:07.065Z,1520506447.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:07.460Z,1520506447.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:07.858Z,1520506447.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:08.260Z,1520506448.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:08.670Z,1520506448.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:09.039Z,1520506449.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:09.458Z,1520506449.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:09.859Z,1520506449.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:10.266Z,1520506450.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:10.664Z,1520506450.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:11.047Z,1520506451.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:11.439Z,1520506451.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:11.840Z,1520506451.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:12.241Z,1520506452.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:12.664Z,1520506452.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:13.066Z,1520506453.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:13.467Z,1520506453.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:13.846Z,1520506453.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:14.247Z,1520506454.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:14.638Z,1520506454.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:15.043Z,1520506455.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:15.442Z,1520506455.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:15.870Z,1520506455.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:16.266Z,1520506456.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:16.665Z,1520506456.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:17.043Z,1520506457.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:17.470Z,1520506457.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:17.847Z,1520506457.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:18.261Z,1520506458.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:18.672Z,1520506458.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:19.056Z,1520506459.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:19.449Z,1520506459.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:19.842Z,1520506459.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:20.245Z,1520506460.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:20.646Z,1520506460.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:21.049Z,1520506461.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:21.462Z,1520506461.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:21.851Z,1520506461.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:22.252Z,1520506462.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:22.652Z,1520506462.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:23.042Z,1520506463.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:23.443Z,1520506463.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:23.839Z,1520506463.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:24.254Z,1520506464.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:24.651Z,1520506464.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:25.058Z,1520506465.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:25.452Z,1520506465.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:25.842Z,1520506465.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:26.242Z,1520506466.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:26.642Z,1520506466.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:27.048Z,1520506467.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:27.447Z,1520506467.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:27.850Z,1520506467.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:28.262Z,1520506468.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:28.658Z,1520506468.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:29.050Z,1520506469.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:29.446Z,1520506469.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:29.838Z,1520506469.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:30.247Z,1520506470.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:30.658Z,1520506470.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:31.081Z,1520506471.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:31.456Z,1520506471.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:31.846Z,1520506471.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:32.246Z,1520506472.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:32.654Z,1520506472.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:33.049Z,1520506473.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:33.469Z,1520506473.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:33.890Z,1520506473.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:34.258Z,1520506474.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:34.657Z,1520506474.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:35.045Z,1520506475.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:35.447Z,1520506475.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:35.848Z,1520506475.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:36.247Z,1520506476.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:36.650Z,1520506476.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:37.053Z,1520506477.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:37.452Z,1520506477.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:37.851Z,1520506477.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:38.254Z,1520506478.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:38.650Z,1520506478.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:39.047Z,1520506479.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:39.447Z,1520506479.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:39.862Z,1520506479.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:40.257Z,1520506480.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:40.664Z,1520506480.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:41.055Z,1520506481.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:41.445Z,1520506481.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:41.848Z,1520506481.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:42.250Z,1520506482.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:42.656Z,1520506482.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:43.063Z,1520506483.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:43.470Z,1520506483.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:43.850Z,1520506483.850 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:43.850Z,1520506483.850 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64
2018-03-08T10:54:43.850Z,1520506483.850 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T10:54:43.852Z,1520506483.852 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:43.852Z,1520506483.852 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64
2018-03-08T10:54:43.852Z,1520506483.852 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T10:54:43.854Z,1520506483.854 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:43.854Z,1520506483.854 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 64
2018-03-08T10:54:43.854Z,1520506483.854 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T10:54:43.866Z,1520506483.866 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T10:54:43.866Z,1520506483.866 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T10:54:43.866Z,1520506483.866 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T10:54:44.273Z,1520506484.273 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T10:54:44.273Z,1520506484.273 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64
2018-03-08T10:54:44.273Z,1520506484.273 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T10:54:44.274Z,1520506484.274 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64
2018-03-08T10:54:44.274Z,1520506484.274 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T10:54:44.274Z,1520506484.274 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 64
2018-03-08T10:54:44.650Z,1520506484.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T10:54:44.650Z,1520506484.650 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:54:44.651Z,1520506484.651 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:54:44.651Z,1520506484.651 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T10:54:44.651Z,1520506484.651 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:54:44.652Z,1520506484.652 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:54:44.652Z,1520506484.652 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T10:54:44.653Z,1520506484.653 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:54:44.653Z,1520506484.653 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:54:45.058Z,1520506485.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T10:54:45.059Z,1520506485.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:45.462Z,1520506485.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T10:54:45.463Z,1520506485.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:45.860Z,1520506485.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T10:54:45.862Z,1520506485.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:48.988Z,1520506488.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2018-03-08T10:54:48.989Z,1520506488.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:49.160Z,1520506489.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-08T10:54:49.161Z,1520506489.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:49.514Z,1520506489.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T10:54:49.515Z,1520506489.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:49.888Z,1520506489.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T10:54:49.889Z,1520506489.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:50.298Z,1520506490.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T10:54:50.299Z,1520506490.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:50.721Z,1520506490.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-08T10:54:50.722Z,1520506490.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:51.123Z,1520506491.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-08T10:54:51.124Z,1520506491.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:51.522Z,1520506491.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-08T10:54:51.523Z,1520506491.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:51.902Z,1520506491.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-08T10:54:51.903Z,1520506491.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:52.292Z,1520506492.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T10:54:52.293Z,1520506492.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:52.695Z,1520506492.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T10:54:52.696Z,1520506492.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:53.092Z,1520506493.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T10:54:53.093Z,1520506493.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:53.494Z,1520506493.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T10:54:53.495Z,1520506493.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:53.908Z,1520506493.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T10:54:53.925Z,1520506493.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:54.304Z,1520506494.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-08T10:54:54.305Z,1520506494.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:54.706Z,1520506494.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T10:54:54.707Z,1520506494.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:55.096Z,1520506495.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T10:54:55.097Z,1520506495.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:55.505Z,1520506495.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T10:54:55.506Z,1520506495.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:55.914Z,1520506495.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T10:54:55.915Z,1520506495.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:56.306Z,1520506496.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T10:54:56.307Z,1520506496.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:56.703Z,1520506496.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-08T10:54:56.704Z,1520506496.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:57.103Z,1520506497.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-08T10:54:57.104Z,1520506497.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:57.505Z,1520506497.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-08T10:54:57.506Z,1520506497.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:57.895Z,1520506497.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T10:54:57.897Z,1520506497.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:58.298Z,1520506498.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T10:54:58.299Z,1520506498.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:58.700Z,1520506498.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T10:54:58.701Z,1520506498.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:59.096Z,1520506499.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T10:54:59.097Z,1520506499.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:59.501Z,1520506499.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T10:54:59.502Z,1520506499.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:54:59.904Z,1520506499.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T10:54:59.905Z,1520506499.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:00.309Z,1520506500.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T10:55:00.310Z,1520506500.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:00.718Z,1520506500.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T10:55:00.719Z,1520506500.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:01.098Z,1520506501.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T10:55:01.099Z,1520506501.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:01.499Z,1520506501.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T10:55:01.500Z,1520506501.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:01.894Z,1520506501.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T10:55:01.895Z,1520506501.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:02.295Z,1520506502.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T10:55:02.296Z,1520506502.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:02.711Z,1520506502.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T10:55:02.712Z,1520506502.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:03.107Z,1520506503.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T10:55:03.108Z,1520506503.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:03.514Z,1520506503.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T10:55:03.515Z,1520506503.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:03.903Z,1520506503.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:04.302Z,1520506504.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:04.703Z,1520506504.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:05.097Z,1520506505.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:05.506Z,1520506505.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:05.910Z,1520506505.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:06.343Z,1520506506.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:06.705Z,1520506506.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:07.106Z,1520506507.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:07.505Z,1520506507.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:07.902Z,1520506507.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:08.299Z,1520506508.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:08.706Z,1520506508.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:09.111Z,1520506509.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:09.507Z,1520506509.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:09.906Z,1520506509.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:10.309Z,1520506510.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:10.699Z,1520506510.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:11.099Z,1520506511.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:11.506Z,1520506511.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:11.911Z,1520506511.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:12.308Z,1520506512.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:12.718Z,1520506512.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:13.103Z,1520506513.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:13.485Z,1520506513.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:13.891Z,1520506513.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:14.287Z,1520506514.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:14.709Z,1520506514.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:15.115Z,1520506515.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:15.508Z,1520506515.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:15.910Z,1520506515.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:16.291Z,1520506516.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:16.700Z,1520506516.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:17.114Z,1520506517.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:17.491Z,1520506517.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:17.904Z,1520506517.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:18.315Z,1520506518.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:18.718Z,1520506518.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:19.115Z,1520506519.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:19.494Z,1520506519.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:19.891Z,1520506519.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:20.298Z,1520506520.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:20.705Z,1520506520.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:21.106Z,1520506521.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:21.506Z,1520506521.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:21.899Z,1520506521.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:22.303Z,1520506522.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:22.691Z,1520506522.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:23.105Z,1520506523.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:23.508Z,1520506523.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:23.914Z,1520506523.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:24.312Z,1520506524.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:24.723Z,1520506524.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:25.105Z,1520506525.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:25.504Z,1520506525.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:25.910Z,1520506525.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:26.302Z,1520506526.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:26.707Z,1520506526.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:27.112Z,1520506527.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:27.506Z,1520506527.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:27.907Z,1520506527.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:28.291Z,1520506528.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:28.714Z,1520506528.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:29.091Z,1520506529.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:29.498Z,1520506529.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:29.922Z,1520506529.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:30.321Z,1520506530.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:30.724Z,1520506530.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:31.095Z,1520506531.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:31.498Z,1520506531.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:31.898Z,1520506531.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:32.290Z,1520506532.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:32.703Z,1520506532.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:33.110Z,1520506533.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:33.500Z,1520506533.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:33.902Z,1520506533.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:34.299Z,1520506534.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:34.703Z,1520506534.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:35.099Z,1520506535.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:35.499Z,1520506535.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:35.900Z,1520506535.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:36.304Z,1520506536.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:36.701Z,1520506536.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:37.103Z,1520506537.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:37.497Z,1520506537.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:37.893Z,1520506537.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:38.299Z,1520506538.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:38.701Z,1520506538.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:39.105Z,1520506539.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:39.501Z,1520506539.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:39.899Z,1520506539.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:40.294Z,1520506540.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:40.698Z,1520506540.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:41.102Z,1520506541.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:41.497Z,1520506541.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:41.899Z,1520506541.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:42.332Z,1520506542.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:42.710Z,1520506542.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:43.103Z,1520506543.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:43.508Z,1520506543.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:43.930Z,1520506543.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:44.300Z,1520506544.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:44.704Z,1520506544.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:45.108Z,1520506545.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:45.514Z,1520506545.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:45.900Z,1520506545.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:49.007Z,1520506549.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:49.147Z,1520506549.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:49.495Z,1520506549.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:49.899Z,1520506549.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:50.299Z,1520506550.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:50.698Z,1520506550.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:51.078Z,1520506551.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:51.471Z,1520506551.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:51.895Z,1520506551.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:52.297Z,1520506552.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:52.695Z,1520506552.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:53.074Z,1520506553.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:53.474Z,1520506553.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:53.898Z,1520506553.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:54.299Z,1520506554.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:54.699Z,1520506554.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:55.100Z,1520506555.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:55.496Z,1520506555.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:55.890Z,1520506555.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:56.275Z,1520506556.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:56.679Z,1520506556.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:57.079Z,1520506557.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:57.474Z,1520506557.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:57.904Z,1520506557.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:58.288Z,1520506558.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:58.707Z,1520506558.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:59.083Z,1520506559.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:59.478Z,1520506559.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:55:59.880Z,1520506559.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:00.286Z,1520506560.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:00.692Z,1520506560.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:01.084Z,1520506561.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:01.492Z,1520506561.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:01.886Z,1520506561.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:02.280Z,1520506562.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:02.678Z,1520506562.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:03.079Z,1520506563.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:03.482Z,1520506563.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:03.885Z,1520506563.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:04.288Z,1520506564.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:04.690Z,1520506564.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:05.081Z,1520506565.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:05.478Z,1520506565.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:05.886Z,1520506565.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:06.281Z,1520506566.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:06.685Z,1520506566.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:07.088Z,1520506567.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:07.484Z,1520506567.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:07.881Z,1520506567.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:08.281Z,1520506568.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:08.680Z,1520506568.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:09.079Z,1520506569.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:09.482Z,1520506569.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:09.894Z,1520506569.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:10.289Z,1520506570.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:10.694Z,1520506570.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:11.081Z,1520506571.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:11.480Z,1520506571.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:11.883Z,1520506571.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:12.283Z,1520506572.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:12.688Z,1520506572.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:13.091Z,1520506573.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:13.491Z,1520506573.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:13.882Z,1520506573.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:14.283Z,1520506574.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:14.680Z,1520506574.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:15.079Z,1520506575.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:15.476Z,1520506575.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:15.888Z,1520506575.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:16.292Z,1520506576.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:16.685Z,1520506576.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:17.082Z,1520506577.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:17.478Z,1520506577.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:17.882Z,1520506577.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:18.279Z,1520506578.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:18.688Z,1520506578.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:19.088Z,1520506579.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:19.487Z,1520506579.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:19.877Z,1520506579.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:20.283Z,1520506580.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:20.679Z,1520506580.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:21.080Z,1520506581.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:21.483Z,1520506581.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:21.892Z,1520506581.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:22.295Z,1520506582.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:22.687Z,1520506582.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:23.086Z,1520506583.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:23.486Z,1520506583.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:23.878Z,1520506583.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:24.285Z,1520506584.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:24.688Z,1520506584.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:25.087Z,1520506585.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:25.489Z,1520506585.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:25.889Z,1520506585.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:26.286Z,1520506586.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:26.685Z,1520506586.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:27.082Z,1520506587.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:27.491Z,1520506587.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:27.902Z,1520506587.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:28.296Z,1520506588.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:28.693Z,1520506588.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:29.099Z,1520506589.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:29.477Z,1520506589.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:29.871Z,1520506589.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:30.282Z,1520506590.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:30.683Z,1520506590.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:31.086Z,1520506591.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:31.488Z,1520506591.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:31.879Z,1520506591.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:32.277Z,1520506592.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:32.686Z,1520506592.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:33.080Z,1520506593.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:33.476Z,1520506593.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:33.892Z,1520506593.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:34.288Z,1520506594.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:34.683Z,1520506594.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:35.084Z,1520506595.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:35.483Z,1520506595.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:35.882Z,1520506595.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:36.281Z,1520506596.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:36.684Z,1520506596.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:37.083Z,1520506597.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:37.491Z,1520506597.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:37.881Z,1520506597.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:38.286Z,1520506598.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:38.681Z,1520506598.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:39.082Z,1520506599.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:39.479Z,1520506599.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:39.885Z,1520506599.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:40.288Z,1520506600.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:40.686Z,1520506600.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:41.081Z,1520506601.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:41.481Z,1520506601.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:41.881Z,1520506601.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:42.278Z,1520506602.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:42.684Z,1520506602.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:43.090Z,1520506603.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:43.490Z,1520506603.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:43.881Z,1520506603.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:44.282Z,1520506604.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:44.677Z,1520506604.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:44.690Z,1520506604.690 [CBIT](INFO): Clearing failed state for component DropWeight
2018-03-08T10:56:44.690Z,1520506604.690 [DropWeight] No Fault, FailCount= 1
2018-03-08T10:56:45.086Z,1520506605.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:45.481Z,1520506605.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:45.484Z,1520506605.484 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T10:56:45.484Z,1520506605.484 [Default:CheckIn:C.Wait] Stopped
2018-03-08T10:56:45.484Z,1520506605.484 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T10:56:45.485Z,1520506605.485 [Default:CheckIn:D] Running Loop=1
2018-03-08T10:56:45.885Z,1520506605.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:45.888Z,1520506605.888 [Default:CheckIn:D] Stopped
2018-03-08T10:56:45.888Z,1520506605.888 [Default:CheckIn:E] Running Loop=1
2018-03-08T10:56:46.294Z,1520506606.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:46.297Z,1520506606.297 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 191.018050 min 
2018-03-08T10:56:46.298Z,1520506606.298 [Default:CheckIn:E] Stopped
2018-03-08T10:56:46.298Z,1520506606.298 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T10:56:46.298Z,1520506606.298 [Default:CheckIn] Stopped
2018-03-08T10:56:46.298Z,1520506606.298 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T10:56:46.298Z,1520506606.298 [Default:CheckIn](INFO): Running loop #19
2018-03-08T10:56:46.298Z,1520506606.298 [Default:CheckIn] Running Loop=19
2018-03-08T10:56:46.298Z,1520506606.298 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T10:56:46.299Z,1520506606.299 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T10:56:49.390Z,1520506609.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:49.526Z,1520506609.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:49.854Z,1520506609.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:50.258Z,1520506610.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:50.659Z,1520506610.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:51.057Z,1520506611.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:51.458Z,1520506611.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:51.880Z,1520506611.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:52.276Z,1520506612.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:52.680Z,1520506612.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:53.059Z,1520506613.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:53.458Z,1520506613.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:53.859Z,1520506613.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:54.253Z,1520506614.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:54.680Z,1520506614.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:55.083Z,1520506615.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:55.460Z,1520506615.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:55.863Z,1520506615.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:56.258Z,1520506616.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:56.653Z,1520506616.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:57.063Z,1520506617.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:57.455Z,1520506617.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:57.856Z,1520506617.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:58.279Z,1520506618.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:58.681Z,1520506618.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:59.054Z,1520506619.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:59.459Z,1520506619.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:56:59.859Z,1520506619.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:00.262Z,1520506620.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:00.679Z,1520506620.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:01.078Z,1520506621.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:01.490Z,1520506621.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:01.862Z,1520506621.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:02.320Z,1520506622.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:02.652Z,1520506622.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:03.069Z,1520506623.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:03.459Z,1520506623.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:03.863Z,1520506623.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:04.267Z,1520506624.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:04.667Z,1520506624.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:05.059Z,1520506625.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:05.458Z,1520506625.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:05.859Z,1520506625.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:06.263Z,1520506626.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:06.678Z,1520506626.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:07.067Z,1520506627.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:07.468Z,1520506627.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:07.858Z,1520506627.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:08.260Z,1520506628.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:08.654Z,1520506628.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:09.061Z,1520506629.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:09.463Z,1520506629.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:09.865Z,1520506629.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:10.274Z,1520506630.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:10.698Z,1520506630.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:11.063Z,1520506631.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:11.462Z,1520506631.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:11.859Z,1520506631.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:12.266Z,1520506632.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:12.668Z,1520506632.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:13.069Z,1520506633.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:13.463Z,1520506633.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:13.862Z,1520506633.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:14.262Z,1520506634.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:14.657Z,1520506634.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:15.061Z,1520506635.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:15.454Z,1520506635.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:15.867Z,1520506635.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:16.267Z,1520506636.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:16.667Z,1520506636.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:17.050Z,1520506637.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:17.455Z,1520506637.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:17.855Z,1520506637.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:18.300Z,1520506638.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:18.664Z,1520506638.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:19.064Z,1520506639.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:19.460Z,1520506639.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:19.858Z,1520506639.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:20.342Z,1520506640.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:20.655Z,1520506640.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:21.052Z,1520506641.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:21.489Z,1520506641.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:21.879Z,1520506641.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:22.271Z,1520506642.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:22.672Z,1520506642.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:23.061Z,1520506643.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:23.466Z,1520506643.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:23.859Z,1520506643.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:24.263Z,1520506644.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:24.670Z,1520506644.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:25.072Z,1520506645.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:25.469Z,1520506645.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:25.864Z,1520506645.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:26.266Z,1520506646.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:26.653Z,1520506646.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:27.065Z,1520506647.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:27.470Z,1520506647.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:27.876Z,1520506647.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:28.277Z,1520506648.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:28.678Z,1520506648.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:29.063Z,1520506649.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:29.470Z,1520506649.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:29.872Z,1520506649.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:30.270Z,1520506650.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:30.675Z,1520506650.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:31.073Z,1520506651.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:31.478Z,1520506651.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:31.879Z,1520506651.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:32.271Z,1520506652.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:32.644Z,1520506652.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:33.073Z,1520506653.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:33.479Z,1520506653.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:33.877Z,1520506653.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:34.282Z,1520506654.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:34.682Z,1520506654.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:35.044Z,1520506655.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:35.474Z,1520506655.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:35.880Z,1520506655.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:36.251Z,1520506656.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:36.676Z,1520506656.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:37.079Z,1520506657.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:37.472Z,1520506657.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:37.875Z,1520506657.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:38.250Z,1520506658.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:38.651Z,1520506658.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:39.055Z,1520506659.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:39.450Z,1520506659.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:39.879Z,1520506659.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:40.279Z,1520506660.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:40.682Z,1520506660.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:41.052Z,1520506661.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:41.457Z,1520506661.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:41.858Z,1520506661.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:42.279Z,1520506662.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:42.683Z,1520506662.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:43.083Z,1520506663.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:43.456Z,1520506663.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:43.863Z,1520506663.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:44.255Z,1520506664.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:44.651Z,1520506664.651 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:44.651Z,1520506664.651 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65
2018-03-08T10:57:44.651Z,1520506664.651 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T10:57:44.653Z,1520506664.653 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:44.653Z,1520506664.653 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65
2018-03-08T10:57:44.653Z,1520506664.653 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T10:57:44.655Z,1520506664.655 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:44.655Z,1520506664.655 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 65
2018-03-08T10:57:44.655Z,1520506664.655 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T10:57:44.683Z,1520506664.683 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T10:57:44.683Z,1520506664.683 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T10:57:44.683Z,1520506664.683 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T10:57:45.082Z,1520506665.082 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T10:57:45.082Z,1520506665.082 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65
2018-03-08T10:57:45.082Z,1520506665.082 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T10:57:45.082Z,1520506665.082 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65
2018-03-08T10:57:45.083Z,1520506665.083 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T10:57:45.083Z,1520506665.083 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 65
2018-03-08T10:57:45.465Z,1520506665.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T10:57:45.466Z,1520506665.466 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:57:45.466Z,1520506665.466 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:57:45.466Z,1520506665.466 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T10:57:45.467Z,1520506665.467 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:57:45.467Z,1520506665.467 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:57:45.467Z,1520506665.467 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T10:57:45.468Z,1520506665.468 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T10:57:45.468Z,1520506665.468 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T10:57:45.870Z,1520506665.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T10:57:45.871Z,1520506665.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:46.275Z,1520506666.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T10:57:46.276Z,1520506666.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:46.678Z,1520506666.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T10:57:46.679Z,1520506666.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:49.760Z,1520506669.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2018-03-08T10:57:49.761Z,1520506669.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:49.906Z,1520506669.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-08T10:57:49.907Z,1520506669.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:50.262Z,1520506670.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T10:57:50.263Z,1520506670.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:50.659Z,1520506670.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T10:57:50.660Z,1520506670.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:51.055Z,1520506671.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T10:57:51.056Z,1520506671.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:51.431Z,1520506671.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T10:57:51.432Z,1520506671.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:51.830Z,1520506671.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T10:57:51.831Z,1520506671.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:52.227Z,1520506672.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T10:57:52.228Z,1520506672.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:52.659Z,1520506672.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T10:57:52.660Z,1520506672.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:53.039Z,1520506673.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T10:57:53.040Z,1520506673.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:53.433Z,1520506673.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T10:57:53.434Z,1520506673.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:53.827Z,1520506673.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T10:57:53.827Z,1520506673.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:54.226Z,1520506674.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T10:57:54.227Z,1520506674.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:54.638Z,1520506674.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T10:57:54.639Z,1520506674.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:55.028Z,1520506675.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T10:57:55.029Z,1520506675.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:55.434Z,1520506675.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T10:57:55.435Z,1520506675.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:55.838Z,1520506675.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T10:57:55.839Z,1520506675.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:56.243Z,1520506676.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T10:57:56.244Z,1520506676.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:56.642Z,1520506676.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T10:57:56.643Z,1520506676.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:57.031Z,1520506677.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T10:57:57.032Z,1520506677.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:57.430Z,1520506677.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T10:57:57.431Z,1520506677.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:57.835Z,1520506677.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T10:57:57.836Z,1520506677.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:58.236Z,1520506678.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T10:57:58.237Z,1520506678.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:58.646Z,1520506678.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T10:57:58.647Z,1520506678.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:59.040Z,1520506679.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T10:57:59.041Z,1520506679.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:59.442Z,1520506679.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T10:57:59.443Z,1520506679.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:57:59.835Z,1520506679.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T10:57:59.836Z,1520506679.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:00.235Z,1520506680.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T10:58:00.236Z,1520506680.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:00.631Z,1520506680.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T10:58:00.632Z,1520506680.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:01.046Z,1520506681.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T10:58:01.047Z,1520506681.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:01.435Z,1520506681.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T10:58:01.436Z,1520506681.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:01.842Z,1520506681.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T10:58:01.843Z,1520506681.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:02.269Z,1520506682.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T10:58:02.270Z,1520506682.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:02.644Z,1520506682.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T10:58:02.645Z,1520506682.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:03.042Z,1520506683.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T10:58:03.043Z,1520506683.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:03.434Z,1520506683.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T10:58:03.435Z,1520506683.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:03.831Z,1520506683.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T10:58:03.832Z,1520506683.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:04.234Z,1520506684.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T10:58:04.235Z,1520506684.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:04.641Z,1520506684.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T10:58:04.641Z,1520506684.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:05.049Z,1520506685.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:05.437Z,1520506685.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:05.833Z,1520506685.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:06.241Z,1520506686.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:06.633Z,1520506686.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:07.037Z,1520506687.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:07.441Z,1520506687.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:07.842Z,1520506687.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:08.250Z,1520506688.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:08.648Z,1520506688.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:09.031Z,1520506689.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:09.437Z,1520506689.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:09.835Z,1520506689.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:10.237Z,1520506690.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:10.648Z,1520506690.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:11.047Z,1520506691.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:11.437Z,1520506691.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:11.837Z,1520506691.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:12.234Z,1520506692.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:12.638Z,1520506692.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:13.037Z,1520506693.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:13.434Z,1520506693.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:13.849Z,1520506693.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:14.248Z,1520506694.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:14.646Z,1520506694.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:15.035Z,1520506695.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:15.441Z,1520506695.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:15.843Z,1520506695.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:16.240Z,1520506696.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:16.646Z,1520506696.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:17.043Z,1520506697.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:17.449Z,1520506697.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:17.841Z,1520506697.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:18.243Z,1520506698.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:18.619Z,1520506698.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:19.043Z,1520506699.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:19.452Z,1520506699.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:19.849Z,1520506699.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:20.258Z,1520506700.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:20.658Z,1520506700.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:21.023Z,1520506701.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:21.431Z,1520506701.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:21.832Z,1520506701.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:22.228Z,1520506702.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:22.652Z,1520506702.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:23.053Z,1520506703.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:23.433Z,1520506703.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:23.830Z,1520506703.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:24.233Z,1520506704.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:24.624Z,1520506704.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:25.033Z,1520506705.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:25.435Z,1520506705.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:25.836Z,1520506705.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:26.237Z,1520506706.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:26.641Z,1520506706.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:27.038Z,1520506707.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:27.434Z,1520506707.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:27.832Z,1520506707.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:28.236Z,1520506708.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:28.637Z,1520506708.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:29.041Z,1520506709.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:29.435Z,1520506709.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:29.831Z,1520506709.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:30.234Z,1520506710.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:30.626Z,1520506710.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:31.038Z,1520506711.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:31.433Z,1520506711.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:31.837Z,1520506711.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:32.243Z,1520506712.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:32.644Z,1520506712.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:33.034Z,1520506713.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:33.434Z,1520506713.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:33.837Z,1520506713.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:34.242Z,1520506714.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:34.650Z,1520506714.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:35.044Z,1520506715.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:35.444Z,1520506715.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:35.836Z,1520506715.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:36.241Z,1520506716.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:36.635Z,1520506716.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:37.043Z,1520506717.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:37.439Z,1520506717.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:37.847Z,1520506717.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:38.246Z,1520506718.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:38.647Z,1520506718.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:39.037Z,1520506719.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:39.433Z,1520506719.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:39.843Z,1520506719.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:40.237Z,1520506720.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:40.664Z,1520506720.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:41.050Z,1520506721.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:41.445Z,1520506721.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:41.838Z,1520506721.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:42.240Z,1520506722.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:42.638Z,1520506722.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:43.036Z,1520506723.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:43.442Z,1520506723.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:43.845Z,1520506723.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:44.248Z,1520506724.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:44.646Z,1520506724.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:45.037Z,1520506725.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:45.439Z,1520506725.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:45.843Z,1520506725.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:46.241Z,1520506726.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:46.644Z,1520506726.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:47.050Z,1520506727.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:50.142Z,1520506730.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:50.290Z,1520506730.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:50.614Z,1520506730.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:51.014Z,1520506731.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:51.438Z,1520506731.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:51.841Z,1520506731.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:52.250Z,1520506732.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:52.615Z,1520506732.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:53.015Z,1520506733.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:53.415Z,1520506733.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:53.822Z,1520506733.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:54.215Z,1520506734.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:54.628Z,1520506734.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:55.015Z,1520506735.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:55.428Z,1520506735.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:55.815Z,1520506735.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:56.219Z,1520506736.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:56.622Z,1520506736.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:57.017Z,1520506737.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:57.415Z,1520506737.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:57.821Z,1520506737.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:58.228Z,1520506738.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:58.623Z,1520506738.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:59.016Z,1520506739.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:59.416Z,1520506739.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:58:59.817Z,1520506739.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:00.222Z,1520506740.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:00.647Z,1520506740.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:01.016Z,1520506741.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:01.420Z,1520506741.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:01.818Z,1520506741.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:02.217Z,1520506742.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:02.616Z,1520506742.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:03.016Z,1520506743.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:03.418Z,1520506743.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:03.846Z,1520506743.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:04.245Z,1520506744.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:04.621Z,1520506744.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:05.014Z,1520506745.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:05.419Z,1520506745.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:05.823Z,1520506745.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:06.217Z,1520506746.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:06.627Z,1520506746.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:07.025Z,1520506747.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:07.421Z,1520506747.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:07.819Z,1520506747.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:08.214Z,1520506748.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:08.614Z,1520506748.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:09.019Z,1520506749.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:09.418Z,1520506749.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:09.819Z,1520506749.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:10.221Z,1520506750.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:10.626Z,1520506750.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:11.017Z,1520506751.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:11.420Z,1520506751.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:11.818Z,1520506751.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:12.215Z,1520506752.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:12.625Z,1520506752.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:13.024Z,1520506753.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:13.421Z,1520506753.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:13.826Z,1520506753.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:14.219Z,1520506754.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:14.615Z,1520506754.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:15.020Z,1520506755.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:15.417Z,1520506755.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:15.825Z,1520506755.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:16.227Z,1520506756.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:16.624Z,1520506756.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:17.020Z,1520506757.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:17.411Z,1520506757.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:17.825Z,1520506757.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:18.219Z,1520506758.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:18.625Z,1520506758.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:19.030Z,1520506759.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:19.424Z,1520506759.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:19.819Z,1520506759.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:20.212Z,1520506760.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:20.618Z,1520506760.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:21.016Z,1520506761.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:21.418Z,1520506761.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:21.823Z,1520506761.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:22.258Z,1520506762.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:22.630Z,1520506762.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:23.022Z,1520506763.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:23.419Z,1520506763.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:23.819Z,1520506763.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:24.214Z,1520506764.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:24.630Z,1520506764.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:25.025Z,1520506765.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:25.430Z,1520506765.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:25.813Z,1520506765.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:26.219Z,1520506766.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:26.618Z,1520506766.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:27.015Z,1520506767.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:27.422Z,1520506767.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:27.778Z,1520506767.778 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T10:59:27.778Z,1520506767.778 [NAL9602] Data Fault, FailCount= 4
2018-03-08T10:59:27.778Z,1520506767.778 [NAL9602](ERROR): Data Fault
2018-03-08T10:59:27.830Z,1520506767.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:27.851Z,1520506767.851 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T10:59:28.170Z,1520506768.170 [NAL9602](INFO): Powering down
2018-03-08T10:59:28.222Z,1520506768.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:28.617Z,1520506768.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:29.018Z,1520506769.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:29.031Z,1520506769.031 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T10:59:29.031Z,1520506769.031 [NAL9602] No Fault, FailCount= 4
2018-03-08T10:59:29.410Z,1520506769.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:29.818Z,1520506769.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:30.218Z,1520506770.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:30.614Z,1520506770.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:31.017Z,1520506771.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:31.418Z,1520506771.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:31.818Z,1520506771.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:32.218Z,1520506772.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:32.614Z,1520506772.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:33.010Z,1520506773.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:33.413Z,1520506773.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:33.814Z,1520506773.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:34.214Z,1520506774.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:34.618Z,1520506774.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:35.013Z,1520506775.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:35.417Z,1520506775.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:35.822Z,1520506775.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:36.216Z,1520506776.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:36.619Z,1520506776.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:37.025Z,1520506777.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:37.417Z,1520506777.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:37.818Z,1520506777.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:38.219Z,1520506778.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:38.619Z,1520506778.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:39.014Z,1520506779.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:39.426Z,1520506779.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:39.822Z,1520506779.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:40.218Z,1520506780.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:40.622Z,1520506780.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:41.022Z,1520506781.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:41.423Z,1520506781.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:41.815Z,1520506781.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:42.222Z,1520506782.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:42.611Z,1520506782.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:43.026Z,1520506783.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:43.418Z,1520506783.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:43.810Z,1520506783.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:44.235Z,1520506784.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:44.620Z,1520506784.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:44.999Z,1520506784.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:45.426Z,1520506785.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:45.827Z,1520506785.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:46.234Z,1520506786.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:46.629Z,1520506786.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:47.006Z,1520506787.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:47.409Z,1520506787.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:50.530Z,1520506790.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:50.654Z,1520506790.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:50.000Z,1520506791.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:51.399Z,1520506791.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:51.805Z,1520506791.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:52.205Z,1520506792.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:52.597Z,1520506792.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:52.997Z,1520506792.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:53.403Z,1520506793.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:53.797Z,1520506793.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:54.203Z,1520506794.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:54.603Z,1520506794.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:54.995Z,1520506794.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:55.403Z,1520506795.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:55.803Z,1520506795.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:56.199Z,1520506796.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:56.603Z,1520506796.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:57.002Z,1520506797.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:57.398Z,1520506797.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:57.803Z,1520506797.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:58.171Z,1520506798.171 [NAL9602](INFO): Powering up NAL9602
2018-03-08T10:59:58.206Z,1520506798.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:58.596Z,1520506798.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:59.003Z,1520506799.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:59.400Z,1520506799.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T10:59:59.795Z,1520506799.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:00.207Z,1520506800.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:00.604Z,1520506800.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:00.999Z,1520506800.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:01.403Z,1520506801.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:01.802Z,1520506801.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:02.207Z,1520506802.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:02.603Z,1520506802.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:03.003Z,1520506803.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:03.403Z,1520506803.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:03.798Z,1520506803.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:04.201Z,1520506804.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:04.599Z,1520506804.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:05.003Z,1520506805.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:05.403Z,1520506805.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:05.799Z,1520506805.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:06.203Z,1520506806.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:06.604Z,1520506806.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:06.999Z,1520506806.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:07.398Z,1520506807.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:07.816Z,1520506807.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:08.207Z,1520506808.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:08.606Z,1520506808.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:09.011Z,1520506809.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:09.366Z,1520506809.366 [NAL9602](INFO): NAL9602 initialized
2018-03-08T11:00:09.410Z,1520506809.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:09.802Z,1520506809.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:10.222Z,1520506810.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:10.613Z,1520506810.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:11.012Z,1520506811.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:11.403Z,1520506811.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:11.815Z,1520506811.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:12.209Z,1520506812.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:12.605Z,1520506812.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:13.013Z,1520506813.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:13.415Z,1520506813.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:13.815Z,1520506813.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:14.208Z,1520506814.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:14.607Z,1520506814.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:15.022Z,1520506815.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:15.422Z,1520506815.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:15.822Z,1520506815.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:16.210Z,1520506816.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:16.603Z,1520506816.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:17.022Z,1520506817.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:17.422Z,1520506817.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:17.816Z,1520506817.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:18.208Z,1520506818.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:18.611Z,1520506818.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:19.014Z,1520506819.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:19.422Z,1520506819.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:19.826Z,1520506819.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:20.207Z,1520506820.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:20.605Z,1520506820.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:21.018Z,1520506821.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:21.417Z,1520506821.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:21.817Z,1520506821.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:22.211Z,1520506822.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:22.611Z,1520506822.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:23.015Z,1520506823.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:23.418Z,1520506823.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:23.814Z,1520506823.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:24.211Z,1520506824.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:24.615Z,1520506824.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:25.012Z,1520506825.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:25.419Z,1520506825.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:25.824Z,1520506825.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:26.211Z,1520506826.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:26.617Z,1520506826.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:27.021Z,1520506827.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:27.431Z,1520506827.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:27.820Z,1520506827.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:28.217Z,1520506828.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:28.625Z,1520506828.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:29.020Z,1520506829.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:29.430Z,1520506829.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:29.825Z,1520506829.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:30.200Z,1520506830.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:30.607Z,1520506830.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:31.032Z,1520506831.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:31.405Z,1520506831.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:31.831Z,1520506831.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:32.207Z,1520506832.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:32.603Z,1520506832.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:33.030Z,1520506833.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:33.406Z,1520506833.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:33.805Z,1520506833.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:34.206Z,1520506834.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:34.598Z,1520506834.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:35.033Z,1520506835.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:35.413Z,1520506835.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:35.809Z,1520506835.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:36.201Z,1520506836.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:36.604Z,1520506836.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:37.009Z,1520506837.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:37.407Z,1520506837.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:37.813Z,1520506837.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:38.211Z,1520506838.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:38.602Z,1520506838.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:39.011Z,1520506839.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:39.408Z,1520506839.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:39.807Z,1520506839.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:40.209Z,1520506840.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:40.607Z,1520506840.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:41.008Z,1520506841.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:41.412Z,1520506841.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:41.809Z,1520506841.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:42.211Z,1520506842.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:42.606Z,1520506842.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:43.013Z,1520506843.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:43.412Z,1520506843.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:43.813Z,1520506843.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:44.207Z,1520506844.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:44.606Z,1520506844.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:45.009Z,1520506845.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:45.413Z,1520506845.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:45.808Z,1520506845.808 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:45.808Z,1520506845.808 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66
2018-03-08T11:00:45.808Z,1520506845.808 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T11:00:45.810Z,1520506845.810 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:45.810Z,1520506845.810 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66
2018-03-08T11:00:45.810Z,1520506845.810 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T11:00:45.812Z,1520506845.812 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:45.812Z,1520506845.812 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 66
2018-03-08T11:00:45.812Z,1520506845.812 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T11:00:45.840Z,1520506845.840 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T11:00:45.849Z,1520506845.849 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T11:00:45.849Z,1520506845.849 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T11:00:46.245Z,1520506846.245 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T11:00:46.246Z,1520506846.246 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66
2018-03-08T11:00:46.246Z,1520506846.246 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T11:00:46.246Z,1520506846.246 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66
2018-03-08T11:00:46.247Z,1520506846.247 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T11:00:46.247Z,1520506846.247 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 66
2018-03-08T11:00:46.610Z,1520506846.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T11:00:46.610Z,1520506846.610 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:00:46.610Z,1520506846.610 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:00:46.611Z,1520506846.611 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T11:00:46.611Z,1520506846.611 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:00:46.611Z,1520506846.611 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:00:46.612Z,1520506846.612 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T11:00:46.612Z,1520506846.612 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:00:46.617Z,1520506846.617 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:00:47.017Z,1520506847.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T11:00:47.018Z,1520506847.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:47.420Z,1520506847.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T11:00:47.421Z,1520506847.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:47.825Z,1520506847.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T11:00:47.826Z,1520506847.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:50.908Z,1520506850.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2018-03-08T11:00:50.909Z,1520506850.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:51.051Z,1520506851.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T11:00:51.052Z,1520506851.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:51.392Z,1520506851.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T11:00:51.409Z,1520506851.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:51.787Z,1520506851.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T11:00:51.788Z,1520506851.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:52.213Z,1520506852.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T11:00:52.214Z,1520506852.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:52.583Z,1520506852.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T11:00:52.584Z,1520506852.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:52.981Z,1520506852.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T11:00:52.982Z,1520506852.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:53.383Z,1520506853.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T11:00:53.384Z,1520506853.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:53.781Z,1520506853.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T11:00:53.782Z,1520506853.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:54.190Z,1520506854.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T11:00:54.191Z,1520506854.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:54.589Z,1520506854.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T11:00:54.590Z,1520506854.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:54.984Z,1520506854.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T11:00:54.985Z,1520506854.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:55.382Z,1520506855.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T11:00:55.383Z,1520506855.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:55.783Z,1520506855.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T11:00:55.784Z,1520506855.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:56.183Z,1520506856.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T11:00:56.184Z,1520506856.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:56.581Z,1520506856.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T11:00:56.582Z,1520506856.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:56.985Z,1520506856.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T11:00:56.986Z,1520506856.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:57.388Z,1520506857.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T11:00:57.389Z,1520506857.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:57.784Z,1520506857.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T11:00:57.785Z,1520506857.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:58.216Z,1520506858.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T11:00:58.217Z,1520506858.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:58.581Z,1520506858.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T11:00:58.582Z,1520506858.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:58.996Z,1520506858.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T11:00:59.020Z,1520506859.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:59.389Z,1520506859.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T11:00:59.390Z,1520506859.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:00:59.784Z,1520506859.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T11:00:59.786Z,1520506859.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:00.183Z,1520506860.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T11:01:00.184Z,1520506860.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:00.581Z,1520506860.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T11:01:00.582Z,1520506860.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:00.984Z,1520506860.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T11:01:00.985Z,1520506860.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:01.456Z,1520506861.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T11:01:01.457Z,1520506861.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:01.784Z,1520506861.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T11:01:01.785Z,1520506861.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:02.183Z,1520506862.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T11:01:02.184Z,1520506862.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:02.581Z,1520506862.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T11:01:02.582Z,1520506862.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:02.996Z,1520506862.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T11:01:03.018Z,1520506863.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:03.388Z,1520506863.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T11:01:03.389Z,1520506863.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:03.786Z,1520506863.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T11:01:03.787Z,1520506863.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:04.184Z,1520506864.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T11:01:04.185Z,1520506864.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:04.586Z,1520506864.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T11:01:04.587Z,1520506864.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:04.989Z,1520506864.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T11:01:04.990Z,1520506864.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:05.388Z,1520506865.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T11:01:05.389Z,1520506865.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:05.788Z,1520506865.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T11:01:05.789Z,1520506865.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:06.185Z,1520506866.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:06.575Z,1520506866.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:06.989Z,1520506866.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:07.388Z,1520506867.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:07.789Z,1520506867.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:08.184Z,1520506868.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:08.586Z,1520506868.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:08.990Z,1520506868.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:09.389Z,1520506869.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:09.788Z,1520506869.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:10.217Z,1520506870.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:10.587Z,1520506870.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:10.994Z,1520506870.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:11.388Z,1520506871.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:11.788Z,1520506871.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:12.187Z,1520506872.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:12.579Z,1520506872.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:12.988Z,1520506872.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:13.387Z,1520506873.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:13.799Z,1520506873.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:14.183Z,1520506874.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:14.587Z,1520506874.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:14.989Z,1520506874.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:15.392Z,1520506875.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:15.799Z,1520506875.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:16.181Z,1520506876.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:16.587Z,1520506876.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:16.989Z,1520506876.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:17.396Z,1520506877.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:17.793Z,1520506877.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:18.190Z,1520506878.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:18.581Z,1520506878.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:18.999Z,1520506878.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:19.389Z,1520506879.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:19.790Z,1520506879.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:20.187Z,1520506880.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:20.590Z,1520506880.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:20.989Z,1520506880.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:21.396Z,1520506881.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:21.793Z,1520506881.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:22.183Z,1520506882.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:22.591Z,1520506882.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:22.996Z,1520506882.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:23.394Z,1520506883.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:23.792Z,1520506883.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:24.184Z,1520506884.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:24.580Z,1520506884.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:24.993Z,1520506884.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:25.406Z,1520506885.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:25.785Z,1520506885.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:26.189Z,1520506886.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:26.586Z,1520506886.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:26.989Z,1520506886.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:27.406Z,1520506887.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:27.798Z,1520506887.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:28.186Z,1520506888.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:28.586Z,1520506888.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:29.003Z,1520506889.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:29.396Z,1520506889.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:29.795Z,1520506889.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:30.189Z,1520506890.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:30.580Z,1520506890.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:30.996Z,1520506890.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:31.399Z,1520506891.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:31.787Z,1520506891.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:32.187Z,1520506892.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:32.594Z,1520506892.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:32.990Z,1520506892.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:33.399Z,1520506893.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:33.793Z,1520506893.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:34.185Z,1520506894.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:34.581Z,1520506894.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:34.998Z,1520506894.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:35.397Z,1520506895.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:35.794Z,1520506895.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:36.229Z,1520506896.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:36.572Z,1520506896.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:36.999Z,1520506896.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:37.397Z,1520506897.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:37.792Z,1520506897.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:38.185Z,1520506898.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:38.587Z,1520506898.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:38.994Z,1520506898.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:39.401Z,1520506899.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:39.803Z,1520506899.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:40.186Z,1520506900.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:40.588Z,1520506900.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:40.997Z,1520506900.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:41.397Z,1520506901.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:41.797Z,1520506901.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:42.194Z,1520506902.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:42.573Z,1520506902.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:42.997Z,1520506902.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:43.392Z,1520506903.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:43.795Z,1520506903.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:44.191Z,1520506904.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:44.593Z,1520506904.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:44.606Z,1520506904.606 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T11:01:44.996Z,1520506904.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:45.397Z,1520506905.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:45.802Z,1520506905.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:46.191Z,1520506906.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:46.589Z,1520506906.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:46.592Z,1520506906.592 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T10:56:46.3Z
2018-03-08T11:01:46.592Z,1520506906.592 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T11:01:46.592Z,1520506906.592 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T11:01:47.010Z,1520506907.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:47.487Z,1520506907.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:47.798Z,1520506907.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:50.990Z,1520506910.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:51.106Z,1520506911.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:51.425Z,1520506911.425 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20180308T074127/Courier0076.lzma
2018-03-08T11:01:51.489Z,1520506911.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:51.886Z,1520506911.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:52.223Z,1520506912.223 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0076.lzma.bak
2018-03-08T11:01:52.223Z,1520506912.223 [DataOverHttps](INFO): SBD MOMSN=7985067
2018-03-08T11:01:52.289Z,1520506912.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:52.848Z,1520506912.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:53.090Z,1520506913.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:56.187Z,1520506916.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:56.331Z,1520506916.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:56.687Z,1520506916.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:57.089Z,1520506917.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:57.461Z,1520506917.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:57.855Z,1520506917.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:01:58.259Z,1520506918.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:01.362Z,1520506921.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:01.518Z,1520506921.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:01.817Z,1520506921.817 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0077.lzma
2018-03-08T11:02:01.868Z,1520506921.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:02.265Z,1520506922.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:02.615Z,1520506922.615 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0077.lzma.bak
2018-03-08T11:02:02.616Z,1520506922.616 [DataOverHttps](INFO): SBD MOMSN=7985073
2018-03-08T11:02:02.678Z,1520506922.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:03.228Z,1520506923.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:03.255Z,1520506923.255 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T11:02:03.256Z,1520506923.256 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T11:02:03.256Z,1520506923.256 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T11:02:03.474Z,1520506923.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:06.597Z,1520506926.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:06.718Z,1520506926.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:07.094Z,1520506927.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:07.474Z,1520506927.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:07.863Z,1520506927.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:08.275Z,1520506928.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:08.666Z,1520506928.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:09.073Z,1520506929.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:09.472Z,1520506929.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:09.880Z,1520506929.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:10.263Z,1520506930.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:10.703Z,1520506930.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:11.070Z,1520506931.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:11.467Z,1520506931.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:11.874Z,1520506931.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:12.279Z,1520506932.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:12.672Z,1520506932.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:13.097Z,1520506933.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:13.521Z,1520506933.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:13.866Z,1520506933.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:14.266Z,1520506934.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:14.674Z,1520506934.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:15.065Z,1520506935.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:15.483Z,1520506935.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:15.886Z,1520506935.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:16.271Z,1520506936.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:16.670Z,1520506936.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:17.067Z,1520506937.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:17.478Z,1520506937.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:17.871Z,1520506937.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:18.281Z,1520506938.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:18.682Z,1520506938.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:19.086Z,1520506939.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:19.474Z,1520506939.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:19.867Z,1520506939.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:20.267Z,1520506940.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:20.668Z,1520506940.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:21.081Z,1520506941.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:21.483Z,1520506941.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:21.884Z,1520506941.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:22.271Z,1520506942.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:22.677Z,1520506942.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:23.075Z,1520506943.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:23.478Z,1520506943.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:23.867Z,1520506943.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:24.293Z,1520506944.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:24.677Z,1520506944.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:25.076Z,1520506945.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:25.483Z,1520506945.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:25.871Z,1520506945.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:26.273Z,1520506946.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:26.682Z,1520506946.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:27.080Z,1520506947.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:27.481Z,1520506947.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:27.885Z,1520506947.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:28.277Z,1520506948.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:28.677Z,1520506948.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:29.071Z,1520506949.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:29.483Z,1520506949.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:29.862Z,1520506949.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:30.298Z,1520506950.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:30.687Z,1520506950.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:31.078Z,1520506951.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:31.472Z,1520506951.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:31.870Z,1520506951.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:32.274Z,1520506952.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:32.668Z,1520506952.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:33.077Z,1520506953.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:33.480Z,1520506953.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:33.881Z,1520506953.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:34.271Z,1520506954.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:34.678Z,1520506954.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:35.073Z,1520506955.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:35.474Z,1520506955.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:35.870Z,1520506955.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:36.281Z,1520506956.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:36.679Z,1520506956.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:37.086Z,1520506957.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:37.471Z,1520506957.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:37.870Z,1520506957.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:38.270Z,1520506958.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:38.666Z,1520506958.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:39.080Z,1520506959.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:39.479Z,1520506959.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:39.880Z,1520506959.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:40.275Z,1520506960.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:40.669Z,1520506960.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:41.065Z,1520506961.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:41.478Z,1520506961.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:41.871Z,1520506961.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:42.280Z,1520506962.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:42.677Z,1520506962.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:43.079Z,1520506963.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:43.465Z,1520506963.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:43.874Z,1520506963.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:44.274Z,1520506964.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:44.671Z,1520506964.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:45.080Z,1520506965.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:45.479Z,1520506965.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:45.883Z,1520506965.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:46.265Z,1520506966.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:46.667Z,1520506966.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:47.070Z,1520506967.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:47.484Z,1520506967.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:47.867Z,1520506967.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:48.319Z,1520506968.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:48.677Z,1520506968.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:49.078Z,1520506969.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:49.458Z,1520506969.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:49.860Z,1520506969.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:50.262Z,1520506970.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:50.661Z,1520506970.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:51.104Z,1520506971.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:51.495Z,1520506971.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:51.887Z,1520506971.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:52.274Z,1520506972.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:52.673Z,1520506972.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:53.070Z,1520506973.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:53.472Z,1520506973.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:53.873Z,1520506973.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:54.281Z,1520506974.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:54.683Z,1520506974.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:55.079Z,1520506975.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:55.474Z,1520506975.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:55.874Z,1520506975.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:56.271Z,1520506976.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:56.667Z,1520506976.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:57.081Z,1520506977.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:57.483Z,1520506977.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:57.881Z,1520506977.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:58.270Z,1520506978.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:58.678Z,1520506978.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:59.071Z,1520506979.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:59.472Z,1520506979.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:02:59.875Z,1520506979.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:00.283Z,1520506980.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:00.684Z,1520506980.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:01.118Z,1520506981.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:01.471Z,1520506981.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:01.872Z,1520506981.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:02.271Z,1520506982.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:02.674Z,1520506982.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:03.082Z,1520506983.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:03.486Z,1520506983.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:03.881Z,1520506983.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:07.022Z,1520506987.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:07.162Z,1520506987.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:07.523Z,1520506987.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:07.904Z,1520506987.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:08.308Z,1520506988.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:08.697Z,1520506988.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:09.099Z,1520506989.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:09.492Z,1520506989.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:09.899Z,1520506989.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:10.305Z,1520506990.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:10.704Z,1520506990.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:11.106Z,1520506991.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:11.499Z,1520506991.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:11.893Z,1520506991.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:12.296Z,1520506992.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:12.696Z,1520506992.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:13.104Z,1520506993.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:13.504Z,1520506993.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:13.906Z,1520506993.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:14.302Z,1520506994.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:14.698Z,1520506994.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:15.096Z,1520506995.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:15.491Z,1520506995.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:15.905Z,1520506995.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:16.305Z,1520506996.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:16.705Z,1520506996.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:17.105Z,1520506997.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:17.499Z,1520506997.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:17.899Z,1520506997.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:18.299Z,1520506998.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:18.698Z,1520506998.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:19.100Z,1520506999.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:19.500Z,1520506999.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:19.902Z,1520506999.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:20.290Z,1520507000.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:20.694Z,1520507000.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:21.098Z,1520507001.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:21.502Z,1520507001.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:21.897Z,1520507001.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:22.304Z,1520507002.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:22.704Z,1520507002.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:23.099Z,1520507003.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:23.498Z,1520507003.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:23.897Z,1520507003.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:24.298Z,1520507004.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:24.698Z,1520507004.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:25.104Z,1520507005.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:25.504Z,1520507005.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:25.910Z,1520507005.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:26.292Z,1520507006.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:26.694Z,1520507006.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:27.098Z,1520507007.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:27.502Z,1520507007.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:27.898Z,1520507007.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:28.306Z,1520507008.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:28.704Z,1520507008.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:29.110Z,1520507009.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:29.498Z,1520507009.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:29.902Z,1520507009.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:30.295Z,1520507010.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:30.697Z,1520507010.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:31.105Z,1520507011.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:31.504Z,1520507011.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:31.910Z,1520507011.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:32.291Z,1520507012.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:32.694Z,1520507012.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:33.091Z,1520507013.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:33.502Z,1520507013.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:33.898Z,1520507013.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:34.304Z,1520507014.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:34.704Z,1520507014.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:35.104Z,1520507015.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:35.497Z,1520507015.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:35.898Z,1520507015.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:36.302Z,1520507016.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:36.698Z,1520507016.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:37.104Z,1520507017.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:37.500Z,1520507017.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:37.904Z,1520507017.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:38.302Z,1520507018.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:38.698Z,1520507018.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:39.098Z,1520507019.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:39.496Z,1520507019.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:39.896Z,1520507019.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:40.300Z,1520507020.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:40.704Z,1520507020.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:41.100Z,1520507021.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:41.498Z,1520507021.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:41.894Z,1520507021.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:42.296Z,1520507022.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:42.699Z,1520507022.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:43.111Z,1520507023.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:43.505Z,1520507023.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:43.904Z,1520507023.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:44.302Z,1520507024.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:44.697Z,1520507024.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:45.098Z,1520507025.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:45.499Z,1520507025.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:45.897Z,1520507025.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:46.304Z,1520507026.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:46.704Z,1520507026.704 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:46.704Z,1520507026.704 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67
2018-03-08T11:03:46.704Z,1520507026.704 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T11:03:46.706Z,1520507026.706 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:46.706Z,1520507026.706 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67
2018-03-08T11:03:46.706Z,1520507026.706 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T11:03:46.708Z,1520507026.708 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:46.708Z,1520507026.708 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 67
2018-03-08T11:03:46.708Z,1520507026.708 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T11:03:46.745Z,1520507026.745 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T11:03:46.745Z,1520507026.745 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T11:03:46.745Z,1520507026.745 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T11:03:47.151Z,1520507027.151 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T11:03:47.151Z,1520507027.151 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67
2018-03-08T11:03:47.152Z,1520507027.152 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T11:03:47.152Z,1520507027.152 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67
2018-03-08T11:03:47.152Z,1520507027.152 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T11:03:47.157Z,1520507027.157 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 67
2018-03-08T11:03:47.499Z,1520507027.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T11:03:47.499Z,1520507027.499 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:03:47.500Z,1520507027.500 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:03:47.500Z,1520507027.500 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T11:03:47.501Z,1520507027.501 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:03:47.501Z,1520507027.501 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:03:47.501Z,1520507027.501 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T11:03:47.502Z,1520507027.502 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:03:47.502Z,1520507027.502 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:03:47.898Z,1520507027.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T11:03:47.899Z,1520507027.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:48.301Z,1520507028.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T11:03:48.302Z,1520507028.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:48.705Z,1520507028.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T11:03:48.706Z,1520507028.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:49.107Z,1520507029.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T11:03:49.109Z,1520507029.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:49.511Z,1520507029.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T11:03:49.512Z,1520507029.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:49.908Z,1520507029.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T11:03:49.909Z,1520507029.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:50.296Z,1520507030.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T11:03:50.297Z,1520507030.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:50.701Z,1520507030.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T11:03:50.702Z,1520507030.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:51.100Z,1520507031.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T11:03:51.101Z,1520507031.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:51.499Z,1520507031.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T11:03:51.500Z,1520507031.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:51.901Z,1520507031.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T11:03:51.902Z,1520507031.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:52.310Z,1520507032.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T11:03:52.311Z,1520507032.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:52.704Z,1520507032.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T11:03:52.705Z,1520507032.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:53.104Z,1520507033.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T11:03:53.105Z,1520507033.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:53.499Z,1520507033.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T11:03:53.500Z,1520507033.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:53.901Z,1520507033.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T11:03:53.902Z,1520507033.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:54.306Z,1520507034.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T11:03:54.307Z,1520507034.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:54.703Z,1520507034.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T11:03:54.704Z,1520507034.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:55.110Z,1520507035.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T11:03:55.111Z,1520507035.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:55.514Z,1520507035.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T11:03:55.515Z,1520507035.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:55.918Z,1520507035.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T11:03:55.919Z,1520507035.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:56.300Z,1520507036.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T11:03:56.301Z,1520507036.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:56.702Z,1520507036.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T11:03:56.703Z,1520507036.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:57.103Z,1520507037.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T11:03:57.104Z,1520507037.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:57.500Z,1520507037.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T11:03:57.506Z,1520507037.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:57.904Z,1520507037.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T11:03:57.905Z,1520507037.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:58.309Z,1520507038.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T11:03:58.310Z,1520507038.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:58.783Z,1520507038.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T11:03:58.783Z,1520507038.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:59.109Z,1520507039.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T11:03:59.110Z,1520507039.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:59.505Z,1520507039.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T11:03:59.506Z,1520507039.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:03:59.883Z,1520507039.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T11:03:59.884Z,1520507039.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:00.310Z,1520507040.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T11:04:00.311Z,1520507040.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:00.693Z,1520507040.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T11:04:00.694Z,1520507040.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:01.092Z,1520507041.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T11:04:01.093Z,1520507041.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:01.512Z,1520507041.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T11:04:01.517Z,1520507041.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:01.902Z,1520507041.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T11:04:01.903Z,1520507041.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:02.291Z,1520507042.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T11:04:02.292Z,1520507042.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:02.695Z,1520507042.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T11:04:02.696Z,1520507042.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:03.093Z,1520507043.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T11:04:03.094Z,1520507043.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:03.492Z,1520507043.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T11:04:03.497Z,1520507043.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:03.897Z,1520507043.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T11:04:03.898Z,1520507043.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:07.005Z,1520507047.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:07.151Z,1520507047.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:07.530Z,1520507047.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:07.903Z,1520507047.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:08.302Z,1520507048.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:08.703Z,1520507048.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:09.132Z,1520507049.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:09.504Z,1520507049.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:09.931Z,1520507049.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:10.311Z,1520507050.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:10.738Z,1520507050.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:11.101Z,1520507051.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:11.503Z,1520507051.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:11.907Z,1520507051.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:12.309Z,1520507052.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:12.713Z,1520507052.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:13.109Z,1520507053.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:13.510Z,1520507053.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:13.902Z,1520507053.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:14.303Z,1520507054.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:14.702Z,1520507054.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:15.118Z,1520507055.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:15.509Z,1520507055.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:15.912Z,1520507055.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:16.307Z,1520507056.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:16.699Z,1520507056.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:17.111Z,1520507057.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:17.508Z,1520507057.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:17.906Z,1520507057.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:18.323Z,1520507058.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:18.716Z,1520507058.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:19.113Z,1520507059.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:19.503Z,1520507059.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:19.903Z,1520507059.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:20.309Z,1520507060.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:20.704Z,1520507060.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:21.113Z,1520507061.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:21.518Z,1520507061.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:21.916Z,1520507061.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:22.309Z,1520507062.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:22.710Z,1520507062.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:23.107Z,1520507063.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:23.503Z,1520507063.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:23.909Z,1520507063.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:24.319Z,1520507064.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:24.723Z,1520507064.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:25.117Z,1520507065.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:25.503Z,1520507065.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:25.905Z,1520507065.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:26.307Z,1520507066.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:26.710Z,1520507066.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:27.117Z,1520507067.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:27.512Z,1520507067.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:27.912Z,1520507067.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:28.309Z,1520507068.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:28.699Z,1520507068.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:29.107Z,1520507069.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:29.515Z,1520507069.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:29.897Z,1520507069.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:30.316Z,1520507070.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:30.716Z,1520507070.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:31.163Z,1520507071.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:31.513Z,1520507071.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:31.914Z,1520507071.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:32.315Z,1520507072.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:32.699Z,1520507072.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:33.125Z,1520507073.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:33.524Z,1520507073.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:33.928Z,1520507073.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:34.300Z,1520507074.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:34.697Z,1520507074.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:35.104Z,1520507075.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:35.504Z,1520507075.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:35.907Z,1520507075.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:36.330Z,1520507076.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:36.708Z,1520507076.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:37.107Z,1520507077.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:37.503Z,1520507077.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:37.902Z,1520507077.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:38.301Z,1520507078.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:38.703Z,1520507078.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:39.132Z,1520507079.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:39.503Z,1520507079.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:39.930Z,1520507079.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:40.299Z,1520507080.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:40.705Z,1520507080.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:41.103Z,1520507081.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:41.503Z,1520507081.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:41.900Z,1520507081.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:42.330Z,1520507082.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:42.708Z,1520507082.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:43.105Z,1520507083.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:43.502Z,1520507083.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:43.901Z,1520507083.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:44.304Z,1520507084.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:44.703Z,1520507084.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:45.132Z,1520507085.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:45.503Z,1520507085.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:45.905Z,1520507085.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:46.304Z,1520507086.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:46.699Z,1520507086.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:47.103Z,1520507087.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:47.503Z,1520507087.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:47.897Z,1520507087.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:48.329Z,1520507088.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:48.731Z,1520507088.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:49.104Z,1520507089.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:49.503Z,1520507089.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:49.902Z,1520507089.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:50.298Z,1520507090.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:50.702Z,1520507090.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:51.112Z,1520507091.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:51.507Z,1520507091.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:51.918Z,1520507091.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:52.306Z,1520507092.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:52.701Z,1520507092.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:53.102Z,1520507093.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:53.513Z,1520507093.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:53.901Z,1520507093.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:54.312Z,1520507094.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:54.718Z,1520507094.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:55.109Z,1520507095.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:55.510Z,1520507095.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:55.910Z,1520507095.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:56.308Z,1520507096.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:56.711Z,1520507096.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:57.121Z,1520507097.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:57.518Z,1520507097.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:57.917Z,1520507097.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:58.308Z,1520507098.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:58.699Z,1520507098.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:59.110Z,1520507099.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:59.508Z,1520507099.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:04:59.910Z,1520507099.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:00.316Z,1520507100.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:00.721Z,1520507100.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:01.117Z,1520507101.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:01.506Z,1520507101.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:01.911Z,1520507101.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:02.308Z,1520507102.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:02.710Z,1520507102.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:03.122Z,1520507103.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:03.519Z,1520507103.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:03.913Z,1520507103.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:07.008Z,1520507107.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:07.147Z,1520507107.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:07.511Z,1520507107.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:07.914Z,1520507107.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:08.300Z,1520507108.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:08.676Z,1520507108.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:09.080Z,1520507109.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:09.476Z,1520507109.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:09.883Z,1520507109.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:10.309Z,1520507110.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:10.685Z,1520507110.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:11.107Z,1520507111.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:11.478Z,1520507111.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:11.887Z,1520507111.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:12.280Z,1520507112.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:12.679Z,1520507112.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:13.092Z,1520507113.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:13.488Z,1520507113.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:13.890Z,1520507113.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:14.281Z,1520507114.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:14.681Z,1520507114.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:15.082Z,1520507115.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:15.486Z,1520507115.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:15.881Z,1520507115.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:16.290Z,1520507116.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:16.688Z,1520507116.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:17.085Z,1520507117.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:17.481Z,1520507117.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:17.881Z,1520507117.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:18.286Z,1520507118.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:18.686Z,1520507118.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:19.085Z,1520507119.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:19.488Z,1520507119.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:19.885Z,1520507119.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:20.281Z,1520507120.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:20.682Z,1520507120.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:21.081Z,1520507121.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:21.479Z,1520507121.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:21.886Z,1520507121.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:22.287Z,1520507122.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:22.683Z,1520507122.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:23.084Z,1520507123.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:23.478Z,1520507123.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:23.881Z,1520507123.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:24.287Z,1520507124.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:24.682Z,1520507124.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:25.085Z,1520507125.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:25.488Z,1520507125.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:25.890Z,1520507125.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:26.281Z,1520507126.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:26.686Z,1520507126.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:27.081Z,1520507127.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:27.477Z,1520507127.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:27.878Z,1520507127.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:28.284Z,1520507128.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:28.688Z,1520507128.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:29.084Z,1520507129.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:29.483Z,1520507129.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:29.882Z,1520507129.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:30.280Z,1520507130.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:30.681Z,1520507130.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:31.084Z,1520507131.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:31.485Z,1520507131.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:31.890Z,1520507131.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:32.286Z,1520507132.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:32.680Z,1520507132.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:33.080Z,1520507133.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:33.487Z,1520507133.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:33.886Z,1520507133.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:34.285Z,1520507134.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:34.695Z,1520507134.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:35.087Z,1520507135.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:35.481Z,1520507135.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:35.881Z,1520507135.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:36.287Z,1520507136.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:36.680Z,1520507136.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:37.085Z,1520507137.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:37.488Z,1520507137.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:37.890Z,1520507137.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:38.280Z,1520507138.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:38.681Z,1520507138.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:39.081Z,1520507139.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:39.486Z,1520507139.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:39.878Z,1520507139.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:40.290Z,1520507140.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:40.684Z,1520507140.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:41.083Z,1520507141.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:41.481Z,1520507141.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:41.881Z,1520507141.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:42.282Z,1520507142.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:42.682Z,1520507142.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:43.085Z,1520507143.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:43.488Z,1520507143.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:43.885Z,1520507143.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:44.278Z,1520507144.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:44.678Z,1520507144.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:45.082Z,1520507145.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:45.480Z,1520507145.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:45.883Z,1520507145.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:46.284Z,1520507146.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:46.684Z,1520507146.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:47.083Z,1520507147.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:47.475Z,1520507147.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:47.876Z,1520507147.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:48.280Z,1520507148.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:48.682Z,1520507148.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:49.083Z,1520507149.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:49.489Z,1520507149.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:49.891Z,1520507149.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:50.275Z,1520507150.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:50.686Z,1520507150.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:51.082Z,1520507151.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:51.482Z,1520507151.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:51.878Z,1520507151.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:52.290Z,1520507152.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:52.684Z,1520507152.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:53.084Z,1520507153.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:53.479Z,1520507153.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:53.875Z,1520507153.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:54.279Z,1520507154.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:54.682Z,1520507154.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:55.087Z,1520507155.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:55.488Z,1520507155.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:55.890Z,1520507155.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:56.282Z,1520507156.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:56.681Z,1520507156.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:57.082Z,1520507157.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:57.482Z,1520507157.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:57.886Z,1520507157.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:58.288Z,1520507158.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:58.683Z,1520507158.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:59.084Z,1520507159.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:59.478Z,1520507159.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:05:59.875Z,1520507159.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:00.283Z,1520507160.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:00.683Z,1520507160.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:01.083Z,1520507161.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:01.488Z,1520507161.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:01.886Z,1520507161.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:02.286Z,1520507162.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:02.681Z,1520507162.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:03.079Z,1520507163.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:03.481Z,1520507163.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:03.882Z,1520507163.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:04.289Z,1520507164.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:07.396Z,1520507167.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:07.555Z,1520507167.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:07.895Z,1520507167.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:08.292Z,1520507168.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:08.699Z,1520507168.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:09.097Z,1520507169.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:09.493Z,1520507169.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:09.896Z,1520507169.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:10.291Z,1520507170.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:10.695Z,1520507170.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:11.092Z,1520507171.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:11.491Z,1520507171.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:11.885Z,1520507171.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:12.317Z,1520507172.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:12.719Z,1520507172.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:13.092Z,1520507173.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:13.499Z,1520507173.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:13.895Z,1520507173.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:14.299Z,1520507174.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:14.694Z,1520507174.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:15.096Z,1520507175.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:15.495Z,1520507175.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:15.895Z,1520507175.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:16.294Z,1520507176.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:16.689Z,1520507176.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:17.093Z,1520507177.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:17.491Z,1520507177.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:17.893Z,1520507177.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:18.295Z,1520507178.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:18.700Z,1520507178.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:19.097Z,1520507179.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:19.490Z,1520507179.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:19.895Z,1520507179.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:20.299Z,1520507180.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:20.690Z,1520507180.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:21.101Z,1520507181.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:21.501Z,1520507181.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:21.897Z,1520507181.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:22.299Z,1520507182.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:22.694Z,1520507182.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:23.090Z,1520507183.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:23.497Z,1520507183.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:23.894Z,1520507183.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:24.301Z,1520507184.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:24.696Z,1520507184.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:25.098Z,1520507185.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:25.494Z,1520507185.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:25.894Z,1520507185.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:26.293Z,1520507186.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:26.686Z,1520507186.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:27.097Z,1520507187.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:27.501Z,1520507187.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:27.896Z,1520507187.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:28.293Z,1520507188.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:28.693Z,1520507188.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:29.093Z,1520507189.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:29.495Z,1520507189.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:29.894Z,1520507189.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:30.296Z,1520507190.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:30.700Z,1520507190.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:31.097Z,1520507191.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:31.493Z,1520507191.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:31.892Z,1520507191.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:32.298Z,1520507192.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:32.693Z,1520507192.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:33.103Z,1520507193.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:33.501Z,1520507193.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:33.899Z,1520507193.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:34.295Z,1520507194.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:34.694Z,1520507194.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:35.086Z,1520507195.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:35.493Z,1520507195.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:35.894Z,1520507195.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:36.296Z,1520507196.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:36.704Z,1520507196.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:37.104Z,1520507197.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:37.489Z,1520507197.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:37.904Z,1520507197.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:38.303Z,1520507198.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:38.694Z,1520507198.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:39.104Z,1520507199.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:39.503Z,1520507199.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:39.904Z,1520507199.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:40.295Z,1520507200.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:40.694Z,1520507200.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:41.092Z,1520507201.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:41.499Z,1520507201.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:41.899Z,1520507201.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:42.303Z,1520507202.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:42.710Z,1520507202.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:43.104Z,1520507203.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:43.494Z,1520507203.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:43.893Z,1520507203.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:44.303Z,1520507204.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:44.694Z,1520507204.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:45.104Z,1520507205.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:45.504Z,1520507205.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:45.903Z,1520507205.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:46.295Z,1520507206.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:46.699Z,1520507206.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:47.094Z,1520507207.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:47.493Z,1520507207.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:47.898Z,1520507207.898 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:47.898Z,1520507207.898 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68
2018-03-08T11:06:47.898Z,1520507207.898 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T11:06:47.900Z,1520507207.900 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:47.900Z,1520507207.900 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68
2018-03-08T11:06:47.901Z,1520507207.901 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T11:06:47.902Z,1520507207.902 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:47.902Z,1520507207.902 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 68
2018-03-08T11:06:47.902Z,1520507207.902 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T11:06:47.922Z,1520507207.922 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T11:06:47.922Z,1520507207.922 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T11:06:47.922Z,1520507207.922 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T11:06:48.315Z,1520507208.315 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T11:06:48.315Z,1520507208.315 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68
2018-03-08T11:06:48.315Z,1520507208.315 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T11:06:48.315Z,1520507208.315 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68
2018-03-08T11:06:48.316Z,1520507208.316 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T11:06:48.316Z,1520507208.316 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 68
2018-03-08T11:06:48.705Z,1520507208.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T11:06:48.705Z,1520507208.705 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:06:48.705Z,1520507208.705 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:06:48.706Z,1520507208.706 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T11:06:48.706Z,1520507208.706 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:06:48.706Z,1520507208.706 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:06:48.707Z,1520507208.707 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T11:06:48.707Z,1520507208.707 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:06:48.707Z,1520507208.707 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:06:49.100Z,1520507209.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T11:06:49.101Z,1520507209.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:49.489Z,1520507209.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T11:06:49.490Z,1520507209.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:49.897Z,1520507209.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T11:06:49.898Z,1520507209.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:50.288Z,1520507210.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T11:06:50.293Z,1520507210.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:50.701Z,1520507210.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T11:06:50.702Z,1520507210.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:51.107Z,1520507211.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T11:06:51.108Z,1520507211.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:51.514Z,1520507211.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T11:06:51.515Z,1520507211.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:51.907Z,1520507211.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T11:06:51.908Z,1520507211.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:52.305Z,1520507212.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T11:06:52.306Z,1520507212.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:52.703Z,1520507212.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T11:06:52.704Z,1520507212.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:53.083Z,1520507213.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T11:06:53.083Z,1520507213.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:53.514Z,1520507213.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T11:06:53.515Z,1520507213.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:53.916Z,1520507213.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T11:06:53.917Z,1520507213.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:54.308Z,1520507214.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T11:06:54.309Z,1520507214.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:54.708Z,1520507214.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T11:06:54.709Z,1520507214.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:55.108Z,1520507215.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T11:06:55.109Z,1520507215.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:55.486Z,1520507215.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T11:06:55.487Z,1520507215.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:55.889Z,1520507215.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T11:06:55.890Z,1520507215.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:56.287Z,1520507216.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T11:06:56.288Z,1520507216.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:56.690Z,1520507216.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T11:06:56.691Z,1520507216.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:57.113Z,1520507217.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T11:06:57.114Z,1520507217.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:57.492Z,1520507217.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T11:06:57.493Z,1520507217.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:57.898Z,1520507217.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T11:06:57.899Z,1520507217.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:58.291Z,1520507218.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T11:06:58.292Z,1520507218.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:58.689Z,1520507218.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T11:06:58.690Z,1520507218.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:59.091Z,1520507219.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T11:06:59.092Z,1520507219.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:59.491Z,1520507219.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T11:06:59.492Z,1520507219.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:06:59.891Z,1520507219.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T11:06:59.892Z,1520507219.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:00.292Z,1520507220.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T11:07:00.293Z,1520507220.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:00.704Z,1520507220.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T11:07:00.721Z,1520507220.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:01.096Z,1520507221.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T11:07:01.097Z,1520507221.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:01.513Z,1520507221.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T11:07:01.514Z,1520507221.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:01.899Z,1520507221.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T11:07:01.901Z,1520507221.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:02.296Z,1520507222.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T11:07:02.297Z,1520507222.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:02.692Z,1520507222.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T11:07:02.693Z,1520507222.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:03.105Z,1520507223.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T11:07:03.106Z,1520507223.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:03.501Z,1520507223.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T11:07:03.502Z,1520507223.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:03.505Z,1520507223.505 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T11:07:03.505Z,1520507223.505 [Default:CheckIn:C.Wait] Stopped
2018-03-08T11:07:03.505Z,1520507223.505 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T11:07:03.505Z,1520507223.505 [Default:CheckIn:D] Running Loop=1
2018-03-08T11:07:03.902Z,1520507223.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T11:07:03.903Z,1520507223.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:03.907Z,1520507223.907 [Default:CheckIn:D] Stopped
2018-03-08T11:07:03.907Z,1520507223.907 [Default:CheckIn:E] Running Loop=1
2018-03-08T11:07:04.296Z,1520507224.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T11:07:04.297Z,1520507224.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:04.300Z,1520507224.300 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 201.318359 min 
2018-03-08T11:07:04.300Z,1520507224.300 [Default:CheckIn:E] Stopped
2018-03-08T11:07:04.300Z,1520507224.300 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T11:07:04.301Z,1520507224.301 [Default:CheckIn] Stopped
2018-03-08T11:07:04.301Z,1520507224.301 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T11:07:04.301Z,1520507224.301 [Default:CheckIn](INFO): Running loop #20
2018-03-08T11:07:04.301Z,1520507224.301 [Default:CheckIn] Running Loop=20
2018-03-08T11:07:04.301Z,1520507224.301 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T11:07:04.301Z,1520507224.301 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T11:07:07.394Z,1520507227.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-03-08T11:07:07.395Z,1520507227.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:07.538Z,1520507227.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T11:07:07.539Z,1520507227.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:07.883Z,1520507227.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T11:07:07.884Z,1520507227.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:08.284Z,1520507228.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:08.705Z,1520507228.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:09.070Z,1520507229.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:09.464Z,1520507229.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:09.866Z,1520507229.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:10.287Z,1520507230.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:10.688Z,1520507230.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:11.064Z,1520507231.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:11.467Z,1520507231.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:11.862Z,1520507231.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:12.264Z,1520507232.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:12.670Z,1520507232.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:13.089Z,1520507233.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:13.464Z,1520507233.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:13.939Z,1520507233.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:14.294Z,1520507234.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:14.659Z,1520507234.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:15.066Z,1520507235.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:15.503Z,1520507235.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:15.864Z,1520507235.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:16.287Z,1520507236.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:16.698Z,1520507236.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:17.070Z,1520507237.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:17.479Z,1520507237.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:17.882Z,1520507237.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:18.270Z,1520507238.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:18.669Z,1520507238.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:19.076Z,1520507239.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:19.476Z,1520507239.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:19.871Z,1520507239.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:20.267Z,1520507240.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:20.663Z,1520507240.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:21.067Z,1520507241.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:21.471Z,1520507241.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:21.864Z,1520507241.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:22.271Z,1520507242.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:22.676Z,1520507242.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:23.081Z,1520507243.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:23.471Z,1520507243.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:23.871Z,1520507243.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:24.272Z,1520507244.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:24.674Z,1520507244.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:25.082Z,1520507245.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:25.475Z,1520507245.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:25.882Z,1520507245.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:26.272Z,1520507246.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:26.674Z,1520507246.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:27.070Z,1520507247.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:27.468Z,1520507247.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:27.865Z,1520507247.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:28.276Z,1520507248.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:28.677Z,1520507248.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:29.075Z,1520507249.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:29.469Z,1520507249.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:29.877Z,1520507249.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:30.272Z,1520507250.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:30.679Z,1520507250.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:31.085Z,1520507251.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:31.490Z,1520507251.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:31.880Z,1520507251.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:32.270Z,1520507252.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:32.669Z,1520507252.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:33.078Z,1520507253.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:33.471Z,1520507253.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:33.878Z,1520507253.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:34.276Z,1520507254.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:34.685Z,1520507254.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:35.080Z,1520507255.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:35.473Z,1520507255.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:35.879Z,1520507255.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:36.273Z,1520507256.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:36.682Z,1520507256.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:37.094Z,1520507257.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:37.479Z,1520507257.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:37.880Z,1520507257.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:38.289Z,1520507258.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:38.673Z,1520507258.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:39.074Z,1520507259.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:39.481Z,1520507259.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:39.873Z,1520507259.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:40.286Z,1520507260.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:40.688Z,1520507260.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:41.081Z,1520507261.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:41.478Z,1520507261.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:41.886Z,1520507261.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:42.260Z,1520507262.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:42.683Z,1520507262.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:43.091Z,1520507263.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:43.488Z,1520507263.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:43.883Z,1520507263.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:44.266Z,1520507264.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:44.667Z,1520507264.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:45.070Z,1520507265.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:45.466Z,1520507265.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:45.863Z,1520507265.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:46.288Z,1520507266.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:46.676Z,1520507266.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:47.095Z,1520507267.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:47.465Z,1520507267.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:47.867Z,1520507267.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:48.270Z,1520507268.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:48.670Z,1520507268.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:49.095Z,1520507269.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:49.494Z,1520507269.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:49.894Z,1520507269.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:50.265Z,1520507270.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:50.667Z,1520507270.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:51.067Z,1520507271.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:51.467Z,1520507271.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:51.870Z,1520507271.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:52.295Z,1520507272.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:52.676Z,1520507272.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:53.094Z,1520507273.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:53.465Z,1520507273.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:53.863Z,1520507273.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:54.267Z,1520507274.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:54.667Z,1520507274.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:55.096Z,1520507275.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:55.494Z,1520507275.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:55.869Z,1520507275.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:56.266Z,1520507276.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:56.667Z,1520507276.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:57.070Z,1520507277.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:57.467Z,1520507277.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:57.867Z,1520507277.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:58.294Z,1520507278.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:58.672Z,1520507278.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:59.094Z,1520507279.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:59.473Z,1520507279.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:07:59.869Z,1520507279.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:00.270Z,1520507280.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:00.673Z,1520507280.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:01.102Z,1520507281.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:01.484Z,1520507281.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:01.877Z,1520507281.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:02.272Z,1520507282.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:02.671Z,1520507282.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:03.074Z,1520507283.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:03.476Z,1520507283.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:03.874Z,1520507283.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:04.277Z,1520507284.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:04.684Z,1520507284.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:07.786Z,1520507287.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:07.922Z,1520507287.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:08.289Z,1520507288.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:08.685Z,1520507288.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:09.114Z,1520507289.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:09.492Z,1520507289.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:09.889Z,1520507289.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:10.279Z,1520507290.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:10.683Z,1520507290.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:11.085Z,1520507291.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:11.483Z,1520507291.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:11.884Z,1520507291.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:12.289Z,1520507292.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:12.692Z,1520507292.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:13.094Z,1520507293.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:13.483Z,1520507293.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:13.885Z,1520507293.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:14.284Z,1520507294.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:14.685Z,1520507294.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:15.088Z,1520507295.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:15.489Z,1520507295.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:15.894Z,1520507295.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:16.285Z,1520507296.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:16.686Z,1520507296.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:17.087Z,1520507297.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:17.486Z,1520507297.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:17.884Z,1520507297.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:18.289Z,1520507298.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:18.688Z,1520507298.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:19.093Z,1520507299.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:19.481Z,1520507299.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:19.883Z,1520507299.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:20.289Z,1520507300.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:20.681Z,1520507300.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:21.090Z,1520507301.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:21.492Z,1520507301.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:21.895Z,1520507301.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:22.285Z,1520507302.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:22.683Z,1520507302.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:23.080Z,1520507303.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:23.491Z,1520507303.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:23.886Z,1520507303.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:24.289Z,1520507304.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:24.692Z,1520507304.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:25.119Z,1520507305.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:25.477Z,1520507305.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:25.882Z,1520507305.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:26.283Z,1520507306.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:26.680Z,1520507306.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:27.088Z,1520507307.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:27.487Z,1520507307.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:27.890Z,1520507307.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:28.279Z,1520507308.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:28.683Z,1520507308.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:29.080Z,1520507309.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:29.486Z,1520507309.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:29.883Z,1520507309.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:30.289Z,1520507310.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:30.696Z,1520507310.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:31.096Z,1520507311.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:31.486Z,1520507311.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:31.891Z,1520507311.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:32.294Z,1520507312.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:32.677Z,1520507312.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:33.095Z,1520507313.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:33.496Z,1520507313.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:33.888Z,1520507313.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:34.290Z,1520507314.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:34.687Z,1520507314.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:35.089Z,1520507315.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:35.485Z,1520507315.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:35.886Z,1520507315.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:36.302Z,1520507316.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:36.691Z,1520507316.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:37.102Z,1520507317.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:37.487Z,1520507317.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:37.890Z,1520507317.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:38.288Z,1520507318.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:38.681Z,1520507318.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:39.092Z,1520507319.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:39.502Z,1520507319.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:39.889Z,1520507319.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:40.290Z,1520507320.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:40.687Z,1520507320.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:41.084Z,1520507321.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:41.484Z,1520507321.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:41.884Z,1520507321.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:42.302Z,1520507322.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:42.702Z,1520507322.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:43.102Z,1520507323.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:43.481Z,1520507323.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:43.883Z,1520507323.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:44.284Z,1520507324.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:44.681Z,1520507324.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:45.102Z,1520507325.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:45.496Z,1520507325.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:45.889Z,1520507325.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:46.286Z,1520507326.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:46.683Z,1520507326.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:47.089Z,1520507327.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:47.486Z,1520507327.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:47.887Z,1520507327.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:48.295Z,1520507328.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:48.702Z,1520507328.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:49.102Z,1520507329.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:49.490Z,1520507329.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:49.886Z,1520507329.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:50.282Z,1520507330.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:50.681Z,1520507330.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:51.092Z,1520507331.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:51.498Z,1520507331.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:51.892Z,1520507331.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:52.290Z,1520507332.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:52.686Z,1520507332.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:53.081Z,1520507333.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:53.505Z,1520507333.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:53.894Z,1520507333.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:54.296Z,1520507334.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:54.696Z,1520507334.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:55.102Z,1520507335.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:55.485Z,1520507335.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:55.890Z,1520507335.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:56.290Z,1520507336.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:56.683Z,1520507336.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:57.101Z,1520507337.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:57.499Z,1520507337.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:57.892Z,1520507337.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:58.294Z,1520507338.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:58.688Z,1520507338.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:59.087Z,1520507339.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:59.487Z,1520507339.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:08:59.890Z,1520507339.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:00.299Z,1520507340.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:00.698Z,1520507340.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:01.112Z,1520507341.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:01.494Z,1520507341.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:01.891Z,1520507341.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:02.303Z,1520507342.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:02.667Z,1520507342.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:03.101Z,1520507343.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:03.510Z,1520507343.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:03.892Z,1520507343.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:04.298Z,1520507344.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:04.677Z,1520507344.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:07.779Z,1520507347.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:07.911Z,1520507347.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:08.309Z,1520507348.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:08.692Z,1520507348.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:09.096Z,1520507349.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:09.481Z,1520507349.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:09.876Z,1520507349.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:10.281Z,1520507350.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:10.681Z,1520507350.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:11.088Z,1520507351.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:11.490Z,1520507351.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:11.894Z,1520507351.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:12.276Z,1520507352.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:12.678Z,1520507352.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:13.085Z,1520507353.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:13.483Z,1520507353.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:13.887Z,1520507353.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:14.299Z,1520507354.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:14.685Z,1520507354.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:15.101Z,1520507355.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:15.490Z,1520507355.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:15.871Z,1520507355.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:16.285Z,1520507356.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:16.686Z,1520507356.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:17.092Z,1520507357.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:17.500Z,1520507357.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:17.893Z,1520507357.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:18.285Z,1520507358.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:18.689Z,1520507358.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:19.087Z,1520507359.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:19.486Z,1520507359.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:19.887Z,1520507359.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:20.289Z,1520507360.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:20.690Z,1520507360.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:21.094Z,1520507361.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:21.486Z,1520507361.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:21.876Z,1520507361.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:22.289Z,1520507362.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:22.691Z,1520507362.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:23.098Z,1520507363.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:23.496Z,1520507363.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:23.899Z,1520507363.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:24.290Z,1520507364.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:24.689Z,1520507364.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:25.090Z,1520507365.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:25.489Z,1520507365.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:25.889Z,1520507365.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:26.292Z,1520507366.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:26.691Z,1520507366.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:27.092Z,1520507367.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:27.491Z,1520507367.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:27.866Z,1520507367.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:28.271Z,1520507368.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:28.695Z,1520507368.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:29.100Z,1520507369.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:29.500Z,1520507369.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:29.898Z,1520507369.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:30.278Z,1520507370.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:30.682Z,1520507370.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:31.077Z,1520507371.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:31.479Z,1520507371.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:31.877Z,1520507371.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:32.308Z,1520507372.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:32.684Z,1520507372.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:33.106Z,1520507373.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:33.477Z,1520507373.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:33.878Z,1520507373.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:34.281Z,1520507374.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:34.679Z,1520507374.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:35.107Z,1520507375.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:35.484Z,1520507375.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:35.908Z,1520507375.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:36.280Z,1520507376.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:36.679Z,1520507376.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:37.080Z,1520507377.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:37.480Z,1520507377.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:37.881Z,1520507377.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:38.307Z,1520507378.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:38.708Z,1520507378.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:39.107Z,1520507379.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:39.479Z,1520507379.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:39.879Z,1520507379.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:40.287Z,1520507380.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:40.682Z,1520507380.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:41.091Z,1520507381.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:41.492Z,1520507381.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:41.893Z,1520507381.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:42.283Z,1520507382.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:42.682Z,1520507382.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:43.089Z,1520507383.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:43.483Z,1520507383.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:43.891Z,1520507383.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:44.291Z,1520507384.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:44.689Z,1520507384.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:45.099Z,1520507385.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:45.481Z,1520507385.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:45.884Z,1520507385.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:46.290Z,1520507386.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:46.682Z,1520507386.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:47.093Z,1520507387.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:47.498Z,1520507387.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:47.898Z,1520507387.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:48.283Z,1520507388.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:48.680Z,1520507388.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:49.076Z,1520507389.076 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:49.076Z,1520507389.076 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69
2018-03-08T11:09:49.076Z,1520507389.076 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T11:09:49.078Z,1520507389.078 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:49.078Z,1520507389.078 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69
2018-03-08T11:09:49.078Z,1520507389.078 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T11:09:49.080Z,1520507389.080 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:49.080Z,1520507389.080 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 69
2018-03-08T11:09:49.080Z,1520507389.080 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T11:09:49.091Z,1520507389.091 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T11:09:49.092Z,1520507389.092 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T11:09:49.092Z,1520507389.092 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T11:09:49.496Z,1520507389.496 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T11:09:49.496Z,1520507389.496 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69
2018-03-08T11:09:49.497Z,1520507389.497 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T11:09:49.497Z,1520507389.497 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69
2018-03-08T11:09:49.497Z,1520507389.497 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T11:09:49.497Z,1520507389.497 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 69
2018-03-08T11:09:49.884Z,1520507389.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T11:09:49.884Z,1520507389.884 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:09:49.885Z,1520507389.885 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:09:49.885Z,1520507389.885 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T11:09:49.886Z,1520507389.886 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:09:49.886Z,1520507389.886 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:09:49.886Z,1520507389.886 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T11:09:49.887Z,1520507389.887 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:09:49.887Z,1520507389.887 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:09:50.291Z,1520507390.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T11:09:50.292Z,1520507390.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:50.696Z,1520507390.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T11:09:50.697Z,1520507390.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:51.092Z,1520507391.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T11:09:51.093Z,1520507391.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:51.489Z,1520507391.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T11:09:51.490Z,1520507391.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:51.889Z,1520507391.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T11:09:51.890Z,1520507391.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:52.288Z,1520507392.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T11:09:52.289Z,1520507392.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:52.691Z,1520507392.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T11:09:52.692Z,1520507392.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:53.096Z,1520507393.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T11:09:53.097Z,1520507393.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:53.501Z,1520507393.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T11:09:53.501Z,1520507393.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:53.891Z,1520507393.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T11:09:53.892Z,1520507393.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:54.289Z,1520507394.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T11:09:54.290Z,1520507394.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:54.689Z,1520507394.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T11:09:54.690Z,1520507394.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:55.090Z,1520507395.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T11:09:55.091Z,1520507395.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:55.489Z,1520507395.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T11:09:55.489Z,1520507395.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:55.889Z,1520507395.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T11:09:55.890Z,1520507395.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:56.290Z,1520507396.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T11:09:56.291Z,1520507396.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:56.697Z,1520507396.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T11:09:56.698Z,1520507396.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:57.098Z,1520507397.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T11:09:57.099Z,1520507397.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:57.481Z,1520507397.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T11:09:57.482Z,1520507397.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:57.890Z,1520507397.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T11:09:57.891Z,1520507397.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:58.295Z,1520507398.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T11:09:58.295Z,1520507398.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:58.676Z,1520507398.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T11:09:58.677Z,1520507398.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:59.100Z,1520507399.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T11:09:59.105Z,1520507399.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:59.483Z,1520507399.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T11:09:59.505Z,1520507399.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:09:59.907Z,1520507399.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T11:09:59.908Z,1520507399.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:00.275Z,1520507400.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T11:10:00.276Z,1520507400.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:00.676Z,1520507400.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T11:10:00.677Z,1520507400.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:01.074Z,1520507401.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T11:10:01.075Z,1520507401.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:01.478Z,1520507401.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T11:10:01.479Z,1520507401.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:01.878Z,1520507401.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T11:10:01.879Z,1520507401.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:02.307Z,1520507402.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T11:10:02.308Z,1520507402.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:02.707Z,1520507402.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T11:10:02.708Z,1520507402.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:03.106Z,1520507403.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T11:10:03.107Z,1520507403.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:03.476Z,1520507403.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T11:10:03.477Z,1520507403.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:03.878Z,1520507403.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T11:10:03.879Z,1520507403.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:04.278Z,1520507404.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T11:10:04.279Z,1520507404.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:04.678Z,1520507404.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T11:10:04.679Z,1520507404.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:05.088Z,1520507405.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T11:10:05.105Z,1520507405.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:08.189Z,1520507408.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-03-08T11:10:08.190Z,1520507408.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:08.346Z,1520507408.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T11:10:08.347Z,1520507408.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:08.687Z,1520507408.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T11:10:08.687Z,1520507408.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:09.087Z,1520507409.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:09.487Z,1520507409.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:09.887Z,1520507409.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:10.255Z,1520507410.255 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T11:10:10.255Z,1520507410.255 [NAL9602] Data Fault, FailCount= 5
2018-03-08T11:10:10.255Z,1520507410.255 [NAL9602](ERROR): Data Fault
2018-03-08T11:10:10.287Z,1520507410.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:10.321Z,1520507410.321 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T11:10:10.325Z,1520507410.325 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-08T11:10:10.646Z,1520507410.646 [NAL9602](INFO): Powering down
2018-03-08T11:10:10.691Z,1520507410.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:10.714Z,1520507410.714 [CBIT](INFO): Critical error at 20180308T111010
2018-03-08T11:10:11.086Z,1520507411.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:11.485Z,1520507411.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:11.883Z,1520507411.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:12.286Z,1520507412.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:12.686Z,1520507412.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:13.082Z,1520507413.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:13.493Z,1520507413.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:13.885Z,1520507413.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:14.289Z,1520507414.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:14.689Z,1520507414.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:15.085Z,1520507415.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:15.489Z,1520507415.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:15.894Z,1520507415.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:16.286Z,1520507416.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:16.686Z,1520507416.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:17.093Z,1520507417.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:17.493Z,1520507417.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:17.887Z,1520507417.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:18.291Z,1520507418.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:18.689Z,1520507418.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:19.083Z,1520507419.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:19.492Z,1520507419.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:19.890Z,1520507419.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:20.292Z,1520507420.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:20.693Z,1520507420.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:21.092Z,1520507421.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:21.471Z,1520507421.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:21.897Z,1520507421.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:22.296Z,1520507422.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:22.671Z,1520507422.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:23.080Z,1520507423.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:23.506Z,1520507423.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:23.871Z,1520507423.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:24.276Z,1520507424.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:24.706Z,1520507424.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:25.072Z,1520507425.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:25.476Z,1520507425.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:25.877Z,1520507425.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:26.301Z,1520507426.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:26.686Z,1520507426.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:27.077Z,1520507427.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:27.485Z,1520507427.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:27.881Z,1520507427.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:28.285Z,1520507428.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:28.678Z,1520507428.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:29.113Z,1520507429.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:29.478Z,1520507429.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:29.878Z,1520507429.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:30.285Z,1520507430.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:30.678Z,1520507430.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:31.078Z,1520507431.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:31.490Z,1520507431.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:31.882Z,1520507431.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:32.282Z,1520507432.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:32.684Z,1520507432.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:33.083Z,1520507433.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:33.481Z,1520507433.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:33.890Z,1520507433.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:34.278Z,1520507434.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:34.678Z,1520507434.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:35.086Z,1520507435.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:35.478Z,1520507435.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:35.879Z,1520507435.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:36.286Z,1520507436.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:36.677Z,1520507436.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:37.087Z,1520507437.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:37.484Z,1520507437.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:37.885Z,1520507437.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:38.281Z,1520507438.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:38.682Z,1520507438.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:39.085Z,1520507439.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:39.486Z,1520507439.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:39.885Z,1520507439.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:40.286Z,1520507440.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:40.678Z,1520507440.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:41.083Z,1520507441.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:41.487Z,1520507441.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:41.879Z,1520507441.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:42.283Z,1520507442.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:42.687Z,1520507442.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:43.080Z,1520507443.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:43.482Z,1520507443.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:43.887Z,1520507443.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:44.281Z,1520507444.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:44.682Z,1520507444.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:45.087Z,1520507445.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:45.482Z,1520507445.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:45.886Z,1520507445.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:46.287Z,1520507446.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:46.679Z,1520507446.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:47.085Z,1520507447.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:47.483Z,1520507447.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:47.882Z,1520507447.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:48.282Z,1520507448.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:48.687Z,1520507448.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:49.082Z,1520507449.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:49.481Z,1520507449.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:49.883Z,1520507449.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:50.287Z,1520507450.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:50.682Z,1520507450.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:51.087Z,1520507451.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:51.487Z,1520507451.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:51.882Z,1520507451.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:52.283Z,1520507452.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:52.680Z,1520507452.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:53.090Z,1520507453.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:53.488Z,1520507453.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:53.882Z,1520507453.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:54.283Z,1520507454.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:54.686Z,1520507454.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:55.087Z,1520507455.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:55.494Z,1520507455.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:55.883Z,1520507455.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:56.285Z,1520507456.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:56.687Z,1520507456.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:57.088Z,1520507457.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:57.489Z,1520507457.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:57.888Z,1520507457.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:58.290Z,1520507458.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:58.681Z,1520507458.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:59.086Z,1520507459.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:59.489Z,1520507459.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:10:59.888Z,1520507459.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:00.291Z,1520507460.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:00.682Z,1520507460.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:01.086Z,1520507461.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:01.484Z,1520507461.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:01.882Z,1520507461.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:02.285Z,1520507462.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:02.698Z,1520507462.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:03.085Z,1520507463.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:03.490Z,1520507463.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:03.884Z,1520507463.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:04.286Z,1520507464.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:04.691Z,1520507464.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:05.100Z,1520507465.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:08.203Z,1520507468.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:08.338Z,1520507468.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:08.693Z,1520507468.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:09.061Z,1520507469.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:09.468Z,1520507469.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:09.872Z,1520507469.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:10.266Z,1520507470.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:10.674Z,1520507470.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:11.072Z,1520507471.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:11.466Z,1520507471.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:11.869Z,1520507471.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:12.278Z,1520507472.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:12.666Z,1520507472.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:13.073Z,1520507473.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:13.470Z,1520507473.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:13.866Z,1520507473.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:14.274Z,1520507474.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:14.672Z,1520507474.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:15.069Z,1520507475.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:15.475Z,1520507475.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:15.873Z,1520507475.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:16.270Z,1520507476.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:16.674Z,1520507476.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:17.070Z,1520507477.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:17.474Z,1520507477.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:17.874Z,1520507477.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:18.269Z,1520507478.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:18.666Z,1520507478.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:19.074Z,1520507479.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:19.475Z,1520507479.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:19.866Z,1520507479.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:20.278Z,1520507480.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:20.669Z,1520507480.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:21.066Z,1520507481.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:21.478Z,1520507481.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:21.874Z,1520507481.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:22.274Z,1520507482.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:22.674Z,1520507482.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:23.074Z,1520507483.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:23.470Z,1520507483.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:23.874Z,1520507483.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:24.275Z,1520507484.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:24.669Z,1520507484.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:25.075Z,1520507485.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:25.474Z,1520507485.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:25.869Z,1520507485.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:26.270Z,1520507486.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:26.670Z,1520507486.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:27.073Z,1520507487.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:27.474Z,1520507487.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:27.878Z,1520507487.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:28.271Z,1520507488.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:28.674Z,1520507488.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:29.074Z,1520507489.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:29.471Z,1520507489.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:29.878Z,1520507489.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:30.274Z,1520507490.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:30.672Z,1520507490.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:31.078Z,1520507491.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:31.478Z,1520507491.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:31.875Z,1520507491.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:32.274Z,1520507492.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:32.674Z,1520507492.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:33.069Z,1520507493.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:33.478Z,1520507493.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:33.882Z,1520507493.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:34.274Z,1520507494.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:34.677Z,1520507494.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:35.074Z,1520507495.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:35.473Z,1520507495.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:35.871Z,1520507495.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:36.275Z,1520507496.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:36.675Z,1520507496.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:37.067Z,1520507497.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:37.480Z,1520507497.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:37.876Z,1520507497.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:38.277Z,1520507498.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:38.685Z,1520507498.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:39.077Z,1520507499.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:39.478Z,1520507499.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:39.874Z,1520507499.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:40.272Z,1520507500.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:40.670Z,1520507500.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:41.082Z,1520507501.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:41.476Z,1520507501.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:41.873Z,1520507501.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:42.274Z,1520507502.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:42.672Z,1520507502.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:43.071Z,1520507503.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:43.483Z,1520507503.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:43.877Z,1520507503.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:44.277Z,1520507504.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:44.674Z,1520507504.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:44.688Z,1520507504.688 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T11:11:45.072Z,1520507505.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:45.477Z,1520507505.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:45.873Z,1520507505.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:46.277Z,1520507506.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:46.677Z,1520507506.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:47.073Z,1520507507.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:47.472Z,1520507507.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:47.870Z,1520507507.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:48.278Z,1520507508.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:48.676Z,1520507508.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:49.073Z,1520507509.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:49.475Z,1520507509.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:49.880Z,1520507509.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:50.278Z,1520507510.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:50.677Z,1520507510.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:51.074Z,1520507511.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:51.477Z,1520507511.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:51.875Z,1520507511.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:52.273Z,1520507512.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:52.678Z,1520507512.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:53.086Z,1520507513.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:53.477Z,1520507513.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:53.878Z,1520507513.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:54.283Z,1520507514.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:54.671Z,1520507514.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:55.078Z,1520507515.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:55.481Z,1520507515.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:55.877Z,1520507515.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:56.277Z,1520507516.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:56.679Z,1520507516.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:57.071Z,1520507517.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:57.476Z,1520507517.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:57.881Z,1520507517.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:58.278Z,1520507518.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:58.677Z,1520507518.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:59.081Z,1520507519.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:59.479Z,1520507519.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:11:59.879Z,1520507519.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:00.282Z,1520507520.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:00.680Z,1520507520.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:01.072Z,1520507521.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:01.481Z,1520507521.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:01.881Z,1520507521.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:02.278Z,1520507522.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:02.681Z,1520507522.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:03.082Z,1520507523.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:03.478Z,1520507523.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:03.880Z,1520507523.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:04.281Z,1520507524.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:04.678Z,1520507524.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:04.682Z,1520507524.682 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T11:07:04.3Z
2018-03-08T11:12:04.682Z,1520507524.682 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T11:12:04.682Z,1520507524.682 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T11:12:05.085Z,1520507525.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:05.552Z,1520507525.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:08.590Z,1520507528.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:08.734Z,1520507528.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:09.025Z,1520507529.025 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180308T074127/Courier0080.lzma
2018-03-08T11:12:09.111Z,1520507529.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:09.453Z,1520507529.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:10.029Z,1520507530.029 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0080.lzma.bak
2018-03-08T11:12:10.029Z,1520507530.029 [DataOverHttps](INFO): SBD MOMSN=7985135
2018-03-08T11:12:10.098Z,1520507530.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:10.450Z,1520507530.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:10.463Z,1520507530.463 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T11:12:10.463Z,1520507530.463 [NAL9602] No Fault, FailCount= 5
2018-03-08T11:12:10.626Z,1520507530.626 [NAL9602](INFO): Powering up NAL9602
2018-03-08T11:12:10.683Z,1520507530.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:13.764Z,1520507533.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:13.900Z,1520507533.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:14.255Z,1520507534.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:14.631Z,1520507534.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:15.030Z,1520507535.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:15.426Z,1520507535.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:15.827Z,1520507535.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:18.929Z,1520507538.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:19.062Z,1520507539.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:19.373Z,1520507539.373 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180308T074127/Express0081.lzma
2018-03-08T11:12:19.426Z,1520507539.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:19.817Z,1520507539.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:20.175Z,1520507540.175 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0081.lzma.bak
2018-03-08T11:12:20.175Z,1520507540.175 [DataOverHttps](INFO): SBD MOMSN=7985145
2018-03-08T11:12:20.234Z,1520507540.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:20.790Z,1520507540.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:20.814Z,1520507540.814 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T11:12:20.814Z,1520507540.814 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T11:12:20.814Z,1520507540.814 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T11:12:21.032Z,1520507541.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:24.079Z,1520507544.079 [NAL9602](INFO): NAL9602 initialized
2018-03-08T11:12:24.123Z,1520507544.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:24.262Z,1520507544.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:24.622Z,1520507544.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:25.018Z,1520507545.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:25.413Z,1520507545.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:25.795Z,1520507545.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:26.190Z,1520507546.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:26.588Z,1520507546.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:26.994Z,1520507546.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:27.395Z,1520507547.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:27.793Z,1520507547.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:28.215Z,1520507548.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:28.621Z,1520507548.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:28.988Z,1520507548.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:29.396Z,1520507549.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:29.791Z,1520507549.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:30.204Z,1520507550.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:30.599Z,1520507550.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:31.004Z,1520507551.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:31.401Z,1520507551.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:31.794Z,1520507551.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:32.198Z,1520507552.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:32.591Z,1520507552.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:32.998Z,1520507552.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:33.391Z,1520507553.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:33.799Z,1520507553.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:34.204Z,1520507554.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:34.606Z,1520507554.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:34.990Z,1520507554.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:35.397Z,1520507555.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:35.795Z,1520507555.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:36.198Z,1520507556.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:36.606Z,1520507556.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:37.004Z,1520507557.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:37.413Z,1520507557.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:37.807Z,1520507557.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:38.190Z,1520507558.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:38.581Z,1520507558.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:38.991Z,1520507558.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:39.393Z,1520507559.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:39.792Z,1520507559.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:40.223Z,1520507560.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:40.706Z,1520507560.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:40.990Z,1520507560.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:41.418Z,1520507561.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:41.818Z,1520507561.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:42.185Z,1520507562.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:42.618Z,1520507562.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:43.013Z,1520507563.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:43.396Z,1520507563.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:43.790Z,1520507563.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:44.298Z,1520507564.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:44.598Z,1520507564.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:44.994Z,1520507564.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:45.396Z,1520507565.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:45.798Z,1520507565.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:46.216Z,1520507566.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:46.626Z,1520507566.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:46.991Z,1520507566.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:47.395Z,1520507567.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:47.797Z,1520507567.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:48.193Z,1520507568.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:48.622Z,1520507568.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:49.000Z,1520507569.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:49.423Z,1520507569.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:49.793Z,1520507569.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:50.190Z,1520507570.190 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:50.190Z,1520507570.190 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70
2018-03-08T11:12:50.190Z,1520507570.190 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T11:12:50.192Z,1520507570.192 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:50.192Z,1520507570.192 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70
2018-03-08T11:12:50.192Z,1520507570.192 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T11:12:50.194Z,1520507570.194 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:50.194Z,1520507570.194 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 70
2018-03-08T11:12:50.194Z,1520507570.194 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T11:12:50.226Z,1520507570.226 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T11:12:50.226Z,1520507570.226 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T11:12:50.226Z,1520507570.226 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T11:12:50.603Z,1520507570.603 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T11:12:50.603Z,1520507570.603 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70
2018-03-08T11:12:50.603Z,1520507570.603 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T11:12:50.603Z,1520507570.603 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70
2018-03-08T11:12:50.604Z,1520507570.604 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T11:12:50.604Z,1520507570.604 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 70
2018-03-08T11:12:50.997Z,1520507570.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T11:12:50.998Z,1520507570.998 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:12:50.998Z,1520507570.998 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:12:50.999Z,1520507570.999 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T11:12:50.999Z,1520507570.999 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:12:50.999Z,1520507570.999 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:12:50.000Z,1520507571.000 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T11:12:51.000Z,1520507571.000 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:12:51.001Z,1520507571.001 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:12:51.395Z,1520507571.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T11:12:51.396Z,1520507571.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:51.810Z,1520507571.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T11:12:51.811Z,1520507571.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:52.210Z,1520507572.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T11:12:52.211Z,1520507572.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:52.614Z,1520507572.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T11:12:52.615Z,1520507572.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:52.979Z,1520507572.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T11:12:52.980Z,1520507572.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:53.409Z,1520507573.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T11:12:53.410Z,1520507573.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:53.786Z,1520507573.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T11:12:53.787Z,1520507573.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:54.183Z,1520507574.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T11:12:54.184Z,1520507574.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:54.615Z,1520507574.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T11:12:54.616Z,1520507574.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:55.011Z,1520507575.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T11:12:55.012Z,1520507575.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:55.408Z,1520507575.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T11:12:55.409Z,1520507575.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:55.791Z,1520507575.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T11:12:55.792Z,1520507575.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:56.272Z,1520507576.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T11:12:56.273Z,1520507576.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:56.588Z,1520507576.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T11:12:56.589Z,1520507576.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:56.994Z,1520507576.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T11:12:56.995Z,1520507576.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:57.394Z,1520507577.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T11:12:57.395Z,1520507577.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:57.792Z,1520507577.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T11:12:57.793Z,1520507577.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:58.216Z,1520507578.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T11:12:58.217Z,1520507578.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:58.618Z,1520507578.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T11:12:58.619Z,1520507578.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:58.987Z,1520507578.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T11:12:58.988Z,1520507578.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:59.394Z,1520507579.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T11:12:59.395Z,1520507579.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:12:59.796Z,1520507579.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T11:12:59.797Z,1520507579.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:00.199Z,1520507580.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T11:13:00.200Z,1520507580.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:00.621Z,1520507580.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T11:13:00.622Z,1520507580.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:01.004Z,1520507581.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T11:13:01.025Z,1520507581.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:01.404Z,1520507581.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T11:13:01.424Z,1520507581.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:01.794Z,1520507581.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T11:13:01.795Z,1520507581.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:02.227Z,1520507582.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T11:13:02.228Z,1520507582.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:02.588Z,1520507582.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T11:13:02.589Z,1520507582.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:02.996Z,1520507582.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T11:13:02.997Z,1520507582.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:03.390Z,1520507583.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T11:13:03.391Z,1520507583.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:03.796Z,1520507583.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T11:13:03.797Z,1520507583.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:04.204Z,1520507584.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T11:13:04.221Z,1520507584.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:04.606Z,1520507584.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T11:13:04.607Z,1520507584.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:04.991Z,1520507584.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T11:13:04.993Z,1520507584.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:05.392Z,1520507585.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T11:13:05.393Z,1520507585.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:05.796Z,1520507585.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T11:13:05.797Z,1520507585.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:06.186Z,1520507586.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T11:13:06.187Z,1520507586.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:06.606Z,1520507586.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T11:13:06.607Z,1520507586.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:07.004Z,1520507587.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T11:13:07.005Z,1520507587.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:07.399Z,1520507587.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T11:13:07.400Z,1520507587.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:07.797Z,1520507587.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T11:13:07.798Z,1520507587.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:08.222Z,1520507588.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T11:13:08.223Z,1520507588.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:08.593Z,1520507588.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T11:13:08.594Z,1520507588.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:08.999Z,1520507588.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T11:13:08.000Z,1520507589.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:09.399Z,1520507589.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T11:13:09.400Z,1520507589.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:09.804Z,1520507589.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T11:13:09.805Z,1520507589.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:10.204Z,1520507590.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:10.630Z,1520507590.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:10.990Z,1520507590.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:11.394Z,1520507591.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:11.797Z,1520507591.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:12.193Z,1520507592.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:12.604Z,1520507592.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:13.005Z,1520507593.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:13.403Z,1520507593.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:13.795Z,1520507593.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:14.207Z,1520507594.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:14.596Z,1520507594.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:14.999Z,1520507594.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:15.400Z,1520507595.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:15.804Z,1520507595.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:16.210Z,1520507596.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:16.606Z,1520507596.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:17.003Z,1520507597.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:17.396Z,1520507597.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:17.801Z,1520507597.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:18.195Z,1520507598.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:18.603Z,1520507598.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:19.005Z,1520507599.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:19.404Z,1520507599.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:19.799Z,1520507599.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:20.208Z,1520507600.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:20.606Z,1520507600.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:20.000Z,1520507601.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:21.397Z,1520507601.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:24.501Z,1520507604.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:24.659Z,1520507604.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:25.005Z,1520507605.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:25.396Z,1520507605.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:25.799Z,1520507605.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:26.196Z,1520507606.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:26.605Z,1520507606.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:27.010Z,1520507607.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:27.405Z,1520507607.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:27.795Z,1520507607.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:28.198Z,1520507608.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:28.594Z,1520507608.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:28.993Z,1520507608.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:29.398Z,1520507609.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:29.810Z,1520507609.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:30.204Z,1520507610.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:30.610Z,1520507610.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:30.990Z,1520507610.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:31.395Z,1520507611.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:31.791Z,1520507611.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:32.193Z,1520507612.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:32.605Z,1520507612.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:33.004Z,1520507613.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:33.403Z,1520507613.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:33.791Z,1520507613.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:34.191Z,1520507614.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:34.591Z,1520507614.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:35.089Z,1520507615.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:35.395Z,1520507615.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:35.805Z,1520507615.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:36.205Z,1520507616.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:36.604Z,1520507616.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:36.994Z,1520507616.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:37.396Z,1520507617.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:37.793Z,1520507617.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:38.192Z,1520507618.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:38.605Z,1520507618.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:39.010Z,1520507619.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:39.401Z,1520507619.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:39.796Z,1520507619.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:40.195Z,1520507620.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:40.607Z,1520507620.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:40.996Z,1520507620.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:41.398Z,1520507621.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:41.803Z,1520507621.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:42.205Z,1520507622.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:42.604Z,1520507622.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:42.990Z,1520507622.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:43.396Z,1520507623.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:43.795Z,1520507623.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:44.193Z,1520507624.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:44.604Z,1520507624.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:45.010Z,1520507625.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:45.406Z,1520507625.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:45.795Z,1520507625.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:46.195Z,1520507626.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:46.594Z,1520507626.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:46.996Z,1520507626.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:47.391Z,1520507627.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:47.800Z,1520507627.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:48.222Z,1520507628.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:48.616Z,1520507628.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:48.986Z,1520507628.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:49.390Z,1520507629.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:49.814Z,1520507629.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:50.187Z,1520507630.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:50.616Z,1520507630.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:50.996Z,1520507630.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:51.403Z,1520507631.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:51.792Z,1520507631.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:52.190Z,1520507632.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:52.589Z,1520507632.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:52.993Z,1520507632.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:53.389Z,1520507633.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:53.792Z,1520507633.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:54.197Z,1520507634.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:54.604Z,1520507634.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:54.994Z,1520507634.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:55.394Z,1520507635.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:55.798Z,1520507635.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:56.198Z,1520507636.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:56.596Z,1520507636.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:57.001Z,1520507637.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:57.402Z,1520507637.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:57.798Z,1520507637.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:58.194Z,1520507638.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:58.598Z,1520507638.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:58.995Z,1520507638.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:59.398Z,1520507639.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:13:59.797Z,1520507639.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:00.203Z,1520507640.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:00.597Z,1520507640.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:00.991Z,1520507640.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:01.395Z,1520507641.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:01.794Z,1520507641.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:02.195Z,1520507642.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:02.597Z,1520507642.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:03.006Z,1520507643.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:03.400Z,1520507643.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:03.789Z,1520507643.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:04.202Z,1520507644.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:04.596Z,1520507644.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:04.990Z,1520507644.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:05.390Z,1520507645.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:05.800Z,1520507645.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:06.226Z,1520507646.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:06.607Z,1520507646.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:06.998Z,1520507646.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:07.395Z,1520507647.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:07.795Z,1520507647.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:08.190Z,1520507648.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:08.600Z,1520507648.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:08.999Z,1520507648.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:09.400Z,1520507649.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:09.791Z,1520507649.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:10.195Z,1520507650.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:10.593Z,1520507650.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:10.991Z,1520507650.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:11.406Z,1520507651.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:11.806Z,1520507651.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:12.199Z,1520507652.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:12.600Z,1520507652.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:13.001Z,1520507653.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:13.395Z,1520507653.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:13.793Z,1520507653.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:14.198Z,1520507654.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:14.599Z,1520507654.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:15.004Z,1520507655.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:15.403Z,1520507655.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:15.791Z,1520507655.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:16.194Z,1520507656.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:16.594Z,1520507656.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:16.996Z,1520507656.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:17.396Z,1520507657.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:17.806Z,1520507657.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:18.205Z,1520507658.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:18.604Z,1520507658.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:18.999Z,1520507658.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:19.397Z,1520507659.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:19.797Z,1520507659.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:20.202Z,1520507660.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:20.603Z,1520507660.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:21.007Z,1520507661.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:21.410Z,1520507661.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:21.789Z,1520507661.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:24.904Z,1520507664.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:25.027Z,1520507665.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:25.402Z,1520507665.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:25.801Z,1520507665.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:26.186Z,1520507666.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:26.579Z,1520507666.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:26.985Z,1520507666.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:27.372Z,1520507667.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:27.780Z,1520507667.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:28.181Z,1520507668.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:28.586Z,1520507668.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:28.978Z,1520507668.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:29.377Z,1520507669.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:29.776Z,1520507669.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:30.176Z,1520507670.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:30.581Z,1520507670.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:30.980Z,1520507670.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:31.386Z,1520507671.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:31.777Z,1520507671.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:32.172Z,1520507672.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:32.578Z,1520507672.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:32.976Z,1520507672.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:33.376Z,1520507673.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:33.784Z,1520507673.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:34.190Z,1520507674.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:34.588Z,1520507674.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:34.976Z,1520507674.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:35.382Z,1520507675.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:35.777Z,1520507675.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:36.179Z,1520507676.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:36.586Z,1520507676.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:36.989Z,1520507676.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:37.391Z,1520507677.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:37.779Z,1520507677.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:38.211Z,1520507678.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:38.586Z,1520507678.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:38.994Z,1520507678.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:39.375Z,1520507679.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:39.815Z,1520507679.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:40.182Z,1520507680.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:40.580Z,1520507680.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:40.975Z,1520507680.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:41.385Z,1520507681.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:41.776Z,1520507681.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:42.175Z,1520507682.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:42.580Z,1520507682.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:42.980Z,1520507682.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:43.380Z,1520507683.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:43.775Z,1520507683.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:44.176Z,1520507684.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:44.575Z,1520507684.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:44.977Z,1520507684.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:45.372Z,1520507685.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:45.780Z,1520507685.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:46.186Z,1520507686.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:46.581Z,1520507686.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:46.977Z,1520507686.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:47.375Z,1520507687.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:47.777Z,1520507687.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:48.175Z,1520507688.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:48.580Z,1520507688.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:48.980Z,1520507688.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:49.380Z,1520507689.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:49.777Z,1520507689.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:50.176Z,1520507690.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:50.576Z,1520507690.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:50.977Z,1520507690.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:51.376Z,1520507691.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:51.781Z,1520507691.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:52.188Z,1520507692.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:52.580Z,1520507692.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:52.977Z,1520507692.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:53.376Z,1520507693.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:53.777Z,1520507693.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:54.177Z,1520507694.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:54.585Z,1520507694.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:54.990Z,1520507694.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:55.390Z,1520507695.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:55.775Z,1520507695.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:56.175Z,1520507696.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:56.575Z,1520507696.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:56.976Z,1520507696.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:57.377Z,1520507697.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:57.783Z,1520507697.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:58.213Z,1520507698.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:58.591Z,1520507698.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:58.973Z,1520507698.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:59.391Z,1520507699.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:14:59.777Z,1520507699.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:00.183Z,1520507700.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:00.589Z,1520507700.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:00.994Z,1520507700.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:01.391Z,1520507701.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:01.779Z,1520507701.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:02.201Z,1520507702.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:02.577Z,1520507702.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:02.978Z,1520507702.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:03.391Z,1520507703.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:03.807Z,1520507703.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:04.193Z,1520507704.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:04.589Z,1520507704.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:04.981Z,1520507704.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:05.383Z,1520507705.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:05.783Z,1520507705.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:06.183Z,1520507706.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:06.592Z,1520507706.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:06.994Z,1520507706.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:07.395Z,1520507707.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:07.794Z,1520507707.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:08.164Z,1520507708.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:08.570Z,1520507708.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:08.968Z,1520507708.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:09.368Z,1520507709.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:09.792Z,1520507709.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:10.199Z,1520507710.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:10.598Z,1520507710.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:10.983Z,1520507710.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:11.375Z,1520507711.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:11.776Z,1520507711.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:12.175Z,1520507712.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:12.580Z,1520507712.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:12.986Z,1520507712.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:13.381Z,1520507713.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:13.776Z,1520507713.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:14.175Z,1520507714.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:14.574Z,1520507714.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:14.977Z,1520507714.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:15.376Z,1520507715.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:15.786Z,1520507715.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:16.180Z,1520507716.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:16.577Z,1520507716.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:16.976Z,1520507716.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:17.375Z,1520507717.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:17.777Z,1520507717.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:18.176Z,1520507718.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:18.581Z,1520507718.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:18.977Z,1520507718.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:19.381Z,1520507719.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:19.775Z,1520507719.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:20.172Z,1520507720.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:20.579Z,1520507720.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:20.976Z,1520507720.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:21.375Z,1520507721.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:21.790Z,1520507721.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:22.184Z,1520507722.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:25.287Z,1520507725.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:25.422Z,1520507725.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:25.787Z,1520507725.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:26.180Z,1520507726.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:26.589Z,1520507726.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:26.991Z,1520507726.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:27.389Z,1520507727.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:27.786Z,1520507727.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:28.187Z,1520507728.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:28.580Z,1520507728.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:28.988Z,1520507728.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:29.389Z,1520507729.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:29.793Z,1520507729.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:30.198Z,1520507730.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:30.592Z,1520507730.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:30.991Z,1520507730.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:31.384Z,1520507731.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:31.784Z,1520507731.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:32.185Z,1520507732.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:32.594Z,1520507732.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:32.996Z,1520507732.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:33.397Z,1520507733.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:33.794Z,1520507733.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:34.228Z,1520507734.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:34.579Z,1520507734.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:34.991Z,1520507734.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:35.387Z,1520507735.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:35.798Z,1520507735.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:36.203Z,1520507736.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:36.603Z,1520507736.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:36.986Z,1520507736.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:37.388Z,1520507737.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:37.791Z,1520507737.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:38.191Z,1520507738.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:38.593Z,1520507738.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:39.006Z,1520507739.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:39.391Z,1520507739.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:39.783Z,1520507739.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:40.206Z,1520507740.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:40.586Z,1520507740.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:40.991Z,1520507740.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:41.386Z,1520507741.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:41.793Z,1520507741.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:42.197Z,1520507742.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:42.602Z,1520507742.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:42.984Z,1520507742.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:43.384Z,1520507743.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:43.799Z,1520507743.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:44.194Z,1520507744.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:44.606Z,1520507744.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:45.019Z,1520507745.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:45.388Z,1520507745.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:45.795Z,1520507745.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:46.237Z,1520507746.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:46.576Z,1520507746.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:47.004Z,1520507747.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:47.378Z,1520507747.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:47.799Z,1520507747.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:48.204Z,1520507748.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:48.606Z,1520507748.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:48.971Z,1520507748.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:49.383Z,1520507749.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:49.782Z,1520507749.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:50.178Z,1520507750.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:50.610Z,1520507750.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:51.009Z,1520507751.009 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:51.010Z,1520507751.010 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71
2018-03-08T11:15:51.010Z,1520507751.010 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T11:15:51.011Z,1520507751.011 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:51.011Z,1520507751.011 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71
2018-03-08T11:15:51.011Z,1520507751.011 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T11:15:51.013Z,1520507751.013 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:51.013Z,1520507751.013 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 71
2018-03-08T11:15:51.013Z,1520507751.013 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T11:15:51.025Z,1520507751.025 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T11:15:51.025Z,1520507751.025 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T11:15:51.025Z,1520507751.025 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T11:15:51.403Z,1520507751.403 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T11:15:51.403Z,1520507751.403 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71
2018-03-08T11:15:51.404Z,1520507751.404 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T11:15:51.404Z,1520507751.404 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71
2018-03-08T11:15:51.405Z,1520507751.405 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T11:15:51.405Z,1520507751.405 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 71
2018-03-08T11:15:51.784Z,1520507751.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T11:15:51.784Z,1520507751.784 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:15:51.789Z,1520507751.789 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:15:51.789Z,1520507751.789 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T11:15:51.789Z,1520507751.789 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:15:51.790Z,1520507751.790 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:15:51.790Z,1520507751.790 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T11:15:51.790Z,1520507751.790 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:15:51.791Z,1520507751.791 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:15:52.183Z,1520507752.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T11:15:52.184Z,1520507752.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:52.594Z,1520507752.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T11:15:52.595Z,1520507752.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:52.990Z,1520507752.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T11:15:52.991Z,1520507752.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:53.388Z,1520507753.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T11:15:53.389Z,1520507753.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:53.798Z,1520507753.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T11:15:53.799Z,1520507753.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:54.191Z,1520507754.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T11:15:54.193Z,1520507754.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:54.592Z,1520507754.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T11:15:54.593Z,1520507754.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:54.982Z,1520507754.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T11:15:54.983Z,1520507754.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:55.385Z,1520507755.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T11:15:55.386Z,1520507755.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:55.788Z,1520507755.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T11:15:55.789Z,1520507755.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:56.192Z,1520507756.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T11:15:56.193Z,1520507756.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:56.592Z,1520507756.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T11:15:56.593Z,1520507756.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:56.992Z,1520507756.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T11:15:56.993Z,1520507756.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:57.393Z,1520507757.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T11:15:57.394Z,1520507757.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:57.786Z,1520507757.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T11:15:57.787Z,1520507757.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:58.189Z,1520507758.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T11:15:58.190Z,1520507758.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:58.580Z,1520507758.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T11:15:58.581Z,1520507758.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:58.983Z,1520507758.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T11:15:58.984Z,1520507758.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:59.382Z,1520507759.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T11:15:59.383Z,1520507759.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:15:59.792Z,1520507759.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T11:15:59.793Z,1520507759.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:00.199Z,1520507760.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T11:16:00.200Z,1520507760.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:00.602Z,1520507760.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T11:16:00.603Z,1520507760.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:00.976Z,1520507760.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T11:16:00.981Z,1520507760.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:01.391Z,1520507761.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T11:16:01.392Z,1520507761.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:01.787Z,1520507761.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T11:16:01.788Z,1520507761.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:02.176Z,1520507762.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T11:16:02.181Z,1520507762.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:02.593Z,1520507762.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T11:16:02.594Z,1520507762.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:03.008Z,1520507763.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T11:16:03.009Z,1520507763.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:03.397Z,1520507763.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T11:16:03.398Z,1520507763.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:03.783Z,1520507763.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T11:16:03.784Z,1520507763.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:04.186Z,1520507764.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T11:16:04.187Z,1520507764.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:04.589Z,1520507764.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T11:16:04.590Z,1520507764.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:04.990Z,1520507764.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T11:16:04.991Z,1520507764.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:05.390Z,1520507765.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T11:16:05.391Z,1520507765.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:05.797Z,1520507765.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T11:16:05.798Z,1520507765.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:06.200Z,1520507766.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T11:16:06.201Z,1520507766.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:06.597Z,1520507766.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T11:16:06.598Z,1520507766.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:06.989Z,1520507766.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T11:16:06.990Z,1520507766.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:07.390Z,1520507767.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T11:16:07.391Z,1520507767.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:07.791Z,1520507767.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T11:16:07.792Z,1520507767.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:08.183Z,1520507768.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T11:16:08.184Z,1520507768.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:08.602Z,1520507768.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T11:16:08.603Z,1520507768.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:09.002Z,1520507769.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T11:16:09.003Z,1520507769.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:09.397Z,1520507769.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T11:16:09.398Z,1520507769.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:09.794Z,1520507769.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T11:16:09.795Z,1520507769.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:10.194Z,1520507770.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T11:16:10.195Z,1520507770.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:10.571Z,1520507770.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T11:16:10.572Z,1520507770.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:10.979Z,1520507770.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T11:16:10.980Z,1520507770.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:11.382Z,1520507771.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:11.805Z,1520507771.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:12.210Z,1520507772.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:12.614Z,1520507772.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:12.984Z,1520507772.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:13.382Z,1520507773.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:13.783Z,1520507773.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:14.191Z,1520507774.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:14.614Z,1520507774.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:14.988Z,1520507774.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:15.388Z,1520507775.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:15.783Z,1520507775.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:16.190Z,1520507776.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:16.578Z,1520507776.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:16.984Z,1520507776.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:17.383Z,1520507777.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:17.785Z,1520507777.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:18.213Z,1520507778.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:18.589Z,1520507778.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:18.977Z,1520507778.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:19.390Z,1520507779.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:19.785Z,1520507779.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:20.181Z,1520507780.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:20.613Z,1520507780.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:20.989Z,1520507780.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:21.414Z,1520507781.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:21.781Z,1520507781.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:22.189Z,1520507782.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:25.280Z,1520507785.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:25.419Z,1520507785.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:25.778Z,1520507785.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:26.173Z,1520507786.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:26.569Z,1520507786.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:26.951Z,1520507786.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:27.350Z,1520507787.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:27.744Z,1520507787.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:28.148Z,1520507788.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:28.578Z,1520507788.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:28.973Z,1520507788.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:29.375Z,1520507789.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:29.751Z,1520507789.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:30.144Z,1520507790.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:30.551Z,1520507790.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:30.951Z,1520507790.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:31.346Z,1520507791.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:31.776Z,1520507791.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:32.196Z,1520507792.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:32.554Z,1520507792.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:32.951Z,1520507792.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:33.351Z,1520507793.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:33.748Z,1520507793.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:34.151Z,1520507794.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:34.578Z,1520507794.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:34.949Z,1520507794.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:35.374Z,1520507795.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:35.750Z,1520507795.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:36.154Z,1520507796.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:36.574Z,1520507796.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:36.951Z,1520507796.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:37.348Z,1520507797.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:37.757Z,1520507797.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:38.180Z,1520507798.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:38.550Z,1520507798.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:38.964Z,1520507798.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:39.354Z,1520507799.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:39.758Z,1520507799.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:40.150Z,1520507800.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:40.562Z,1520507800.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:40.957Z,1520507800.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:41.357Z,1520507801.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:41.754Z,1520507801.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:42.148Z,1520507802.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:42.551Z,1520507802.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:42.955Z,1520507802.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:43.356Z,1520507803.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:43.757Z,1520507803.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:44.157Z,1520507804.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:44.565Z,1520507804.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:44.954Z,1520507804.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:45.357Z,1520507805.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:45.756Z,1520507805.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:46.155Z,1520507806.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:46.566Z,1520507806.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:46.962Z,1520507806.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:47.367Z,1520507807.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:47.756Z,1520507807.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:48.151Z,1520507808.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:48.550Z,1520507808.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:48.962Z,1520507808.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:49.349Z,1520507809.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:49.759Z,1520507809.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:50.166Z,1520507810.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:50.560Z,1520507810.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:50.958Z,1520507810.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:51.356Z,1520507811.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:51.756Z,1520507811.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:52.150Z,1520507812.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:52.561Z,1520507812.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:52.969Z,1520507812.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:53.366Z,1520507813.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:53.755Z,1520507813.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:54.149Z,1520507814.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:54.550Z,1520507814.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:54.953Z,1520507814.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:55.349Z,1520507815.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:55.760Z,1520507815.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:56.161Z,1520507816.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:56.560Z,1520507816.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:56.954Z,1520507816.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:57.352Z,1520507817.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:57.763Z,1520507817.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:58.158Z,1520507818.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:58.561Z,1520507818.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:58.961Z,1520507818.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:59.359Z,1520507819.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:16:59.757Z,1520507819.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:00.154Z,1520507820.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:00.558Z,1520507820.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:00.956Z,1520507820.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:01.354Z,1520507821.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:01.760Z,1520507821.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:02.161Z,1520507822.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:02.560Z,1520507822.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:02.955Z,1520507822.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:03.356Z,1520507823.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:03.756Z,1520507823.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:04.159Z,1520507824.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:04.570Z,1520507824.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:04.974Z,1520507824.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:05.374Z,1520507825.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:05.760Z,1520507825.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:06.164Z,1520507826.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:06.562Z,1520507826.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:06.997Z,1520507826.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:07.366Z,1520507827.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:07.783Z,1520507827.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:08.174Z,1520507828.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:08.568Z,1520507828.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:08.970Z,1520507828.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:09.368Z,1520507829.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:09.759Z,1520507829.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:10.171Z,1520507830.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:10.570Z,1520507830.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:10.967Z,1520507830.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:11.379Z,1520507831.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:11.759Z,1520507831.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:12.155Z,1520507832.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:12.552Z,1520507832.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:12.952Z,1520507832.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:13.359Z,1520507833.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:13.760Z,1520507833.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:14.164Z,1520507834.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:14.564Z,1520507834.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:14.972Z,1520507834.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:15.358Z,1520507835.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:15.757Z,1520507835.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:16.167Z,1520507836.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:16.565Z,1520507836.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:16.970Z,1520507836.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:17.369Z,1520507837.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:17.759Z,1520507837.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:18.162Z,1520507838.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:18.557Z,1520507838.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:18.962Z,1520507838.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:19.359Z,1520507839.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:19.766Z,1520507839.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:20.170Z,1520507840.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:20.565Z,1520507840.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:20.957Z,1520507840.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:21.359Z,1520507841.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:21.362Z,1520507841.362 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T11:17:21.362Z,1520507841.362 [Default:CheckIn:C.Wait] Stopped
2018-03-08T11:17:21.363Z,1520507841.363 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T11:17:21.363Z,1520507841.363 [Default:CheckIn:D] Running Loop=1
2018-03-08T11:17:21.762Z,1520507841.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:21.765Z,1520507841.765 [Default:CheckIn:D] Stopped
2018-03-08T11:17:21.765Z,1520507841.765 [Default:CheckIn:E] Running Loop=1
2018-03-08T11:17:22.158Z,1520507842.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:22.161Z,1520507842.161 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 211.615999 min 
2018-03-08T11:17:22.161Z,1520507842.161 [Default:CheckIn:E] Stopped
2018-03-08T11:17:22.161Z,1520507842.161 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T11:17:22.161Z,1520507842.161 [Default:CheckIn] Stopped
2018-03-08T11:17:22.161Z,1520507842.161 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T11:17:22.162Z,1520507842.162 [Default:CheckIn](INFO): Running loop #21
2018-03-08T11:17:22.162Z,1520507842.162 [Default:CheckIn] Running Loop=21
2018-03-08T11:17:22.162Z,1520507842.162 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T11:17:22.162Z,1520507842.162 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T11:17:22.569Z,1520507842.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:25.666Z,1520507845.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:25.810Z,1520507845.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:26.134Z,1520507846.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:26.532Z,1520507846.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:26.935Z,1520507846.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:27.339Z,1520507847.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:27.771Z,1520507847.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:28.141Z,1520507848.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:28.563Z,1520507848.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:28.939Z,1520507848.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:29.336Z,1520507849.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:29.743Z,1520507849.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:30.140Z,1520507850.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:30.569Z,1520507850.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:30.948Z,1520507850.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:31.349Z,1520507851.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:31.734Z,1520507851.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:32.143Z,1520507852.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:32.543Z,1520507852.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:32.937Z,1520507852.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:33.350Z,1520507853.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:33.749Z,1520507853.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:34.150Z,1520507854.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:34.549Z,1520507854.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:34.940Z,1520507854.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:35.341Z,1520507855.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:35.746Z,1520507855.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:36.144Z,1520507856.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:36.548Z,1520507856.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:36.949Z,1520507856.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:37.349Z,1520507857.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:37.743Z,1520507857.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:38.141Z,1520507858.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:38.549Z,1520507858.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:38.939Z,1520507858.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:39.340Z,1520507859.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:39.753Z,1520507859.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:40.151Z,1520507860.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:40.551Z,1520507860.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:40.945Z,1520507860.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:41.342Z,1520507861.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:41.741Z,1520507861.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:42.150Z,1520507862.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:42.556Z,1520507862.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:42.962Z,1520507862.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:43.354Z,1520507863.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:43.750Z,1520507863.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:44.149Z,1520507864.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:44.544Z,1520507864.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:44.950Z,1520507864.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:45.350Z,1520507865.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:45.762Z,1520507865.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:46.158Z,1520507866.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:46.561Z,1520507866.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:46.942Z,1520507866.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:47.355Z,1520507867.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:47.756Z,1520507867.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:48.158Z,1520507868.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:48.555Z,1520507868.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:48.959Z,1520507868.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:49.359Z,1520507869.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:49.735Z,1520507869.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:50.139Z,1520507870.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:50.535Z,1520507870.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:50.939Z,1520507870.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:51.333Z,1520507871.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:51.749Z,1520507871.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:52.216Z,1520507872.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:52.550Z,1520507872.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:52.934Z,1520507872.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:53.330Z,1520507873.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:53.732Z,1520507873.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:54.179Z,1520507874.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:54.555Z,1520507874.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:54.950Z,1520507874.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:55.351Z,1520507875.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:55.730Z,1520507875.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:56.139Z,1520507876.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:56.555Z,1520507876.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:56.947Z,1520507876.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:57.350Z,1520507877.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:57.758Z,1520507877.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:58.162Z,1520507878.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:58.556Z,1520507878.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:58.954Z,1520507878.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:59.350Z,1520507879.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:17:59.749Z,1520507879.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:00.152Z,1520507880.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:00.554Z,1520507880.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:00.954Z,1520507880.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:01.355Z,1520507881.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:01.750Z,1520507881.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:02.152Z,1520507882.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:02.554Z,1520507882.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:02.950Z,1520507882.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:03.354Z,1520507883.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:03.792Z,1520507883.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:04.156Z,1520507884.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:04.573Z,1520507884.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:04.965Z,1520507884.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:05.354Z,1520507885.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:05.755Z,1520507885.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:06.131Z,1520507886.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:06.562Z,1520507886.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:06.961Z,1520507886.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:07.366Z,1520507887.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:07.731Z,1520507887.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:08.135Z,1520507888.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:08.535Z,1520507888.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:08.940Z,1520507888.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:09.339Z,1520507889.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:09.764Z,1520507889.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:10.161Z,1520507890.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:10.560Z,1520507890.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:10.936Z,1520507890.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:11.339Z,1520507891.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:11.739Z,1520507891.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:12.138Z,1520507892.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:12.562Z,1520507892.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:12.959Z,1520507892.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:13.363Z,1520507893.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:13.739Z,1520507893.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:14.137Z,1520507894.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:14.535Z,1520507894.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:14.967Z,1520507894.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:15.346Z,1520507895.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:15.750Z,1520507895.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:16.175Z,1520507896.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:16.550Z,1520507896.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:16.951Z,1520507896.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:17.355Z,1520507897.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:17.762Z,1520507897.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:18.151Z,1520507898.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:18.554Z,1520507898.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:18.953Z,1520507898.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:19.358Z,1520507899.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:19.750Z,1520507899.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:20.150Z,1520507900.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:20.554Z,1520507900.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:20.950Z,1520507900.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:21.350Z,1520507901.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:21.755Z,1520507901.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:22.151Z,1520507902.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:22.555Z,1520507902.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:22.955Z,1520507902.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:26.047Z,1520507906.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:26.164Z,1520507906.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:26.548Z,1520507906.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:26.928Z,1520507906.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:27.320Z,1520507907.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:27.719Z,1520507907.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:28.115Z,1520507908.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:28.523Z,1520507908.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:28.920Z,1520507908.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:29.318Z,1520507909.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:29.749Z,1520507909.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:30.135Z,1520507910.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:30.528Z,1520507910.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:30.925Z,1520507910.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:31.323Z,1520507911.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:31.722Z,1520507911.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:32.123Z,1520507912.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:32.527Z,1520507912.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:32.928Z,1520507912.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:33.335Z,1520507913.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:33.723Z,1520507913.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:34.118Z,1520507914.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:34.523Z,1520507914.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:34.925Z,1520507914.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:35.323Z,1520507915.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:35.735Z,1520507915.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:36.135Z,1520507916.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:36.528Z,1520507916.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:36.923Z,1520507916.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:37.320Z,1520507917.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:37.717Z,1520507917.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:38.122Z,1520507918.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:38.535Z,1520507918.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:38.928Z,1520507918.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:39.335Z,1520507919.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:39.730Z,1520507919.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:40.123Z,1520507920.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:40.523Z,1520507920.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:40.919Z,1520507920.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:41.318Z,1520507921.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:41.728Z,1520507921.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:42.135Z,1520507922.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:42.535Z,1520507922.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:42.919Z,1520507922.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:43.318Z,1520507923.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:43.723Z,1520507923.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:44.123Z,1520507924.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:44.535Z,1520507924.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:44.928Z,1520507924.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:45.335Z,1520507925.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:45.721Z,1520507925.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:46.126Z,1520507926.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:46.523Z,1520507926.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:46.920Z,1520507926.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:47.327Z,1520507927.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:47.739Z,1520507927.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:48.139Z,1520507928.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:48.532Z,1520507928.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:48.922Z,1520507928.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:49.319Z,1520507929.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:49.722Z,1520507929.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:50.123Z,1520507930.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:50.535Z,1520507930.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:50.931Z,1520507930.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:51.332Z,1520507931.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:51.721Z,1520507931.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:52.123Z,1520507932.123 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:52.123Z,1520507932.123 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72
2018-03-08T11:18:52.123Z,1520507932.123 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T11:18:52.125Z,1520507932.125 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:52.125Z,1520507932.125 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72
2018-03-08T11:18:52.125Z,1520507932.125 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T11:18:52.127Z,1520507932.127 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:52.127Z,1520507932.127 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 72
2018-03-08T11:18:52.127Z,1520507932.127 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T11:18:52.139Z,1520507932.139 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T11:18:52.139Z,1520507932.139 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T11:18:52.139Z,1520507932.139 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T11:18:52.536Z,1520507932.536 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T11:18:52.537Z,1520507932.537 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72
2018-03-08T11:18:52.537Z,1520507932.537 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T11:18:52.537Z,1520507932.537 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72
2018-03-08T11:18:52.538Z,1520507932.538 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T11:18:52.538Z,1520507932.538 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 72
2018-03-08T11:18:52.919Z,1520507932.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T11:18:52.919Z,1520507932.919 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:18:52.920Z,1520507932.920 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:18:52.920Z,1520507932.920 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T11:18:52.921Z,1520507932.921 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:18:52.921Z,1520507932.921 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:18:52.921Z,1520507932.921 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T11:18:52.922Z,1520507932.922 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:18:52.922Z,1520507932.922 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:18:53.329Z,1520507933.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T11:18:53.330Z,1520507933.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:53.732Z,1520507933.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T11:18:53.734Z,1520507933.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:54.132Z,1520507934.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T11:18:54.134Z,1520507934.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:54.532Z,1520507934.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T11:18:54.534Z,1520507934.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:54.923Z,1520507934.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T11:18:54.924Z,1520507934.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:55.319Z,1520507935.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T11:18:55.320Z,1520507935.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:55.727Z,1520507935.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T11:18:55.727Z,1520507935.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:56.124Z,1520507936.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T11:18:56.125Z,1520507936.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:56.535Z,1520507936.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T11:18:56.536Z,1520507936.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:56.932Z,1520507936.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T11:18:56.934Z,1520507936.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:57.332Z,1520507937.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T11:18:57.334Z,1520507937.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:57.719Z,1520507937.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T11:18:57.720Z,1520507937.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:58.128Z,1520507938.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T11:18:58.129Z,1520507938.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:58.530Z,1520507938.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T11:18:58.531Z,1520507938.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:58.933Z,1520507938.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T11:18:58.934Z,1520507938.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:59.326Z,1520507939.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T11:18:59.327Z,1520507939.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:18:59.733Z,1520507939.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T11:18:59.734Z,1520507939.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:00.132Z,1520507940.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T11:19:00.134Z,1520507940.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:00.534Z,1520507940.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T11:19:00.535Z,1520507940.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:00.926Z,1520507940.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T11:19:00.927Z,1520507940.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:01.324Z,1520507941.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T11:19:01.325Z,1520507941.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:01.732Z,1520507941.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T11:19:01.733Z,1520507941.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:02.120Z,1520507942.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T11:19:02.125Z,1520507942.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:02.539Z,1520507942.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T11:19:02.540Z,1520507942.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:02.940Z,1520507942.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T11:19:02.941Z,1520507942.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:03.334Z,1520507943.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T11:19:03.335Z,1520507943.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:03.735Z,1520507943.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T11:19:03.736Z,1520507943.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:04.190Z,1520507944.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T11:19:04.191Z,1520507944.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:04.503Z,1520507944.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T11:19:04.504Z,1520507944.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:04.938Z,1520507944.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T11:19:04.939Z,1520507944.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:05.341Z,1520507945.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T11:19:05.341Z,1520507945.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:05.734Z,1520507945.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T11:19:05.735Z,1520507945.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:06.139Z,1520507946.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T11:19:06.140Z,1520507946.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:06.539Z,1520507946.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T11:19:06.540Z,1520507946.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:06.929Z,1520507946.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T11:19:06.930Z,1520507946.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:07.329Z,1520507947.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T11:19:07.330Z,1520507947.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:07.732Z,1520507947.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T11:19:07.733Z,1520507947.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:08.107Z,1520507948.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T11:19:08.108Z,1520507948.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:08.539Z,1520507948.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T11:19:08.540Z,1520507948.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:08.936Z,1520507948.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T11:19:08.937Z,1520507948.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:09.339Z,1520507949.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T11:19:09.340Z,1520507949.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:09.709Z,1520507949.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T11:19:09.710Z,1520507949.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:10.113Z,1520507950.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T11:19:10.114Z,1520507950.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:10.511Z,1520507950.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T11:19:10.513Z,1520507950.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:10.918Z,1520507950.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T11:19:10.919Z,1520507950.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:11.317Z,1520507951.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T11:19:11.318Z,1520507951.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:11.716Z,1520507951.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T11:19:11.717Z,1520507951.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:12.140Z,1520507952.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:12.520Z,1520507952.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:12.914Z,1520507952.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:13.318Z,1520507953.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:13.715Z,1520507953.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:14.116Z,1520507954.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:14.543Z,1520507954.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:14.946Z,1520507954.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:15.344Z,1520507955.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:15.719Z,1520507955.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:16.115Z,1520507956.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:16.522Z,1520507956.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:16.919Z,1520507956.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:17.319Z,1520507957.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:17.727Z,1520507957.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:18.128Z,1520507958.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:18.531Z,1520507958.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:18.913Z,1520507958.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:19.323Z,1520507959.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:19.719Z,1520507959.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:20.113Z,1520507960.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:20.521Z,1520507960.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:20.932Z,1520507960.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:21.332Z,1520507961.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:21.721Z,1520507961.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:22.122Z,1520507962.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:22.522Z,1520507962.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:22.923Z,1520507962.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:23.318Z,1520507963.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:26.427Z,1520507966.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:26.578Z,1520507966.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:26.935Z,1520507966.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:27.314Z,1520507967.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:27.722Z,1520507967.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:28.122Z,1520507968.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:28.535Z,1520507968.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:28.927Z,1520507968.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:29.327Z,1520507969.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:29.722Z,1520507969.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:30.122Z,1520507970.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:30.518Z,1520507970.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:30.920Z,1520507970.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:31.319Z,1520507971.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:31.727Z,1520507971.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:32.121Z,1520507972.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:32.528Z,1520507972.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:32.918Z,1520507972.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:33.314Z,1520507973.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:33.717Z,1520507973.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:34.114Z,1520507974.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:34.531Z,1520507974.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:34.930Z,1520507974.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:35.335Z,1520507975.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:35.712Z,1520507975.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:36.122Z,1520507976.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:36.517Z,1520507976.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:36.920Z,1520507976.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:37.321Z,1520507977.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:37.724Z,1520507977.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:38.126Z,1520507978.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:38.535Z,1520507978.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:38.918Z,1520507978.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:39.320Z,1520507979.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:39.725Z,1520507979.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:40.126Z,1520507980.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:40.532Z,1520507980.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:40.931Z,1520507980.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:41.335Z,1520507981.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:41.711Z,1520507981.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:42.123Z,1520507982.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:42.523Z,1520507982.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:42.920Z,1520507982.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:43.320Z,1520507983.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:43.729Z,1520507983.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:44.128Z,1520507984.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:44.528Z,1520507984.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:44.926Z,1520507984.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:45.327Z,1520507985.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:45.724Z,1520507985.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:46.130Z,1520507986.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:46.530Z,1520507986.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:46.931Z,1520507986.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:47.336Z,1520507987.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:47.703Z,1520507987.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:48.129Z,1520507988.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:48.530Z,1520507988.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:48.926Z,1520507988.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:49.331Z,1520507989.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:49.739Z,1520507989.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:50.113Z,1520507990.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:50.534Z,1520507990.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:50.909Z,1520507990.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:51.307Z,1520507991.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:51.712Z,1520507991.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:52.112Z,1520507992.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:52.537Z,1520507992.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:52.934Z,1520507992.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:53.335Z,1520507993.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:53.707Z,1520507993.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:54.117Z,1520507994.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:54.515Z,1520507994.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:54.913Z,1520507994.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:55.314Z,1520507995.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:55.737Z,1520507995.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:56.113Z,1520507996.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:56.536Z,1520507996.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:56.912Z,1520507996.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:57.312Z,1520507997.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:57.739Z,1520507997.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:58.114Z,1520507998.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:58.524Z,1520507998.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:58.948Z,1520507998.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:59.316Z,1520507999.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:19:59.713Z,1520507999.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:00.113Z,1520508000.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:00.523Z,1520508000.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:00.909Z,1520508000.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:01.317Z,1520508001.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:01.730Z,1520508001.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:02.121Z,1520508002.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:02.530Z,1520508002.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:02.922Z,1520508002.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:03.319Z,1520508003.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:03.714Z,1520508003.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:04.118Z,1520508004.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:04.525Z,1520508004.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:04.924Z,1520508004.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:05.323Z,1520508005.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:05.712Z,1520508005.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:06.113Z,1520508006.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:06.518Z,1520508006.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:06.915Z,1520508006.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:07.318Z,1520508007.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:07.728Z,1520508007.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:08.125Z,1520508008.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:08.527Z,1520508008.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:08.922Z,1520508008.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:09.319Z,1520508009.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:09.718Z,1520508009.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:10.122Z,1520508010.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:10.535Z,1520508010.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:10.930Z,1520508010.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:11.329Z,1520508011.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:11.718Z,1520508011.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:12.119Z,1520508012.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:12.518Z,1520508012.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:12.915Z,1520508012.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:13.319Z,1520508013.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:13.724Z,1520508013.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:14.128Z,1520508014.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:14.535Z,1520508014.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:14.922Z,1520508014.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:15.315Z,1520508015.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:15.720Z,1520508015.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:16.123Z,1520508016.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:16.527Z,1520508016.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:16.929Z,1520508016.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:17.325Z,1520508017.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:17.719Z,1520508017.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:18.116Z,1520508018.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:18.515Z,1520508018.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:18.912Z,1520508018.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:19.318Z,1520508019.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:19.745Z,1520508019.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:20.134Z,1520508020.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:20.549Z,1520508020.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:20.918Z,1520508020.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:21.315Z,1520508021.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:21.718Z,1520508021.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:22.113Z,1520508022.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:22.520Z,1520508022.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:22.925Z,1520508022.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:23.322Z,1520508023.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:23.716Z,1520508023.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:26.818Z,1520508026.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:26.924Z,1520508026.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:27.318Z,1520508027.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:27.708Z,1520508027.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:28.102Z,1520508028.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:28.502Z,1520508028.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:28.886Z,1520508028.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:29.287Z,1520508029.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:29.709Z,1520508029.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:30.114Z,1520508030.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:30.509Z,1520508030.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:30.887Z,1520508030.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:31.289Z,1520508031.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:31.691Z,1520508031.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:32.087Z,1520508032.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:32.517Z,1520508032.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:32.895Z,1520508032.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:33.317Z,1520508033.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:33.691Z,1520508033.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:34.090Z,1520508034.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:34.493Z,1520508034.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:34.891Z,1520508034.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:35.291Z,1520508035.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:35.697Z,1520508035.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:36.100Z,1520508036.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:36.495Z,1520508036.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:36.892Z,1520508036.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:37.294Z,1520508037.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:37.691Z,1520508037.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:38.093Z,1520508038.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:38.496Z,1520508038.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:38.895Z,1520508038.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:39.295Z,1520508039.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:39.691Z,1520508039.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:40.091Z,1520508040.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:40.498Z,1520508040.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:40.891Z,1520508040.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:41.289Z,1520508041.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:41.695Z,1520508041.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:42.100Z,1520508042.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:42.497Z,1520508042.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:42.893Z,1520508042.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:43.290Z,1520508043.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:43.698Z,1520508043.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:44.087Z,1520508044.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:44.496Z,1520508044.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:44.900Z,1520508044.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:45.299Z,1520508045.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:45.691Z,1520508045.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:46.089Z,1520508046.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:46.500Z,1520508046.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:46.896Z,1520508046.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:47.299Z,1520508047.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:47.700Z,1520508047.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:48.103Z,1520508048.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:48.503Z,1520508048.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:48.895Z,1520508048.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:49.290Z,1520508049.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:49.696Z,1520508049.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:50.102Z,1520508050.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:50.504Z,1520508050.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:50.901Z,1520508050.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:51.299Z,1520508051.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:51.695Z,1520508051.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:52.098Z,1520508052.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:52.494Z,1520508052.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:52.891Z,1520508052.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:53.295Z,1520508053.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:53.710Z,1520508053.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:54.110Z,1520508054.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:54.504Z,1520508054.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:54.898Z,1520508054.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:55.296Z,1520508055.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:55.696Z,1520508055.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:56.092Z,1520508056.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:56.510Z,1520508056.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:56.897Z,1520508056.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:57.301Z,1520508057.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:57.691Z,1520508057.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:58.098Z,1520508058.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:58.491Z,1520508058.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:58.891Z,1520508058.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:59.294Z,1520508059.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:20:59.703Z,1520508059.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:00.103Z,1520508060.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:00.511Z,1520508060.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:00.893Z,1520508060.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:01.299Z,1520508061.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:01.695Z,1520508061.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:02.094Z,1520508062.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:02.503Z,1520508062.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:02.899Z,1520508062.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:03.304Z,1520508063.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:03.691Z,1520508063.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:04.087Z,1520508064.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:04.501Z,1520508064.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:04.891Z,1520508064.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:05.294Z,1520508065.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:05.703Z,1520508065.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:06.110Z,1520508066.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:06.510Z,1520508066.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:06.894Z,1520508066.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:07.290Z,1520508067.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:07.695Z,1520508067.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:08.093Z,1520508068.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:08.510Z,1520508068.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:08.896Z,1520508068.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:09.304Z,1520508069.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:09.691Z,1520508069.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:10.092Z,1520508070.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:10.492Z,1520508070.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:10.896Z,1520508070.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:11.292Z,1520508071.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:11.706Z,1520508071.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:12.104Z,1520508072.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:12.510Z,1520508072.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:12.898Z,1520508072.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:13.291Z,1520508073.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:13.694Z,1520508073.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:14.099Z,1520508074.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:14.510Z,1520508074.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:14.897Z,1520508074.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:15.300Z,1520508075.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:15.694Z,1520508075.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:16.097Z,1520508076.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:16.494Z,1520508076.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:16.891Z,1520508076.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:17.298Z,1520508077.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:17.701Z,1520508077.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:18.110Z,1520508078.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:18.504Z,1520508078.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:18.898Z,1520508078.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:19.303Z,1520508079.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:19.695Z,1520508079.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:20.094Z,1520508080.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:20.505Z,1520508080.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:20.899Z,1520508080.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:21.306Z,1520508081.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:21.695Z,1520508081.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:22.097Z,1520508082.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:22.493Z,1520508082.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:22.901Z,1520508082.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:23.298Z,1520508083.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:23.714Z,1520508083.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:24.108Z,1520508084.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:27.198Z,1520508087.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:27.342Z,1520508087.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:27.669Z,1520508087.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:28.070Z,1520508088.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:28.495Z,1520508088.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:28.898Z,1520508088.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:29.301Z,1520508089.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:29.669Z,1520508089.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:30.075Z,1520508090.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:30.500Z,1520508090.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:30.872Z,1520508090.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:31.280Z,1520508091.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:31.675Z,1520508091.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:32.072Z,1520508092.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:32.484Z,1520508092.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:32.880Z,1520508092.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:33.280Z,1520508093.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:33.675Z,1520508093.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:34.076Z,1520508094.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:34.486Z,1520508094.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:34.881Z,1520508094.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:35.286Z,1520508095.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:35.672Z,1520508095.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:36.070Z,1520508096.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:36.480Z,1520508096.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:36.880Z,1520508096.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:37.279Z,1520508097.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:37.675Z,1520508097.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:38.076Z,1520508098.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:38.479Z,1520508098.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:38.881Z,1520508098.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:39.279Z,1520508099.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:39.682Z,1520508099.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:40.073Z,1520508100.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:40.486Z,1520508100.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:40.887Z,1520508100.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:41.282Z,1520508101.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:41.676Z,1520508101.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:42.073Z,1520508102.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:42.480Z,1520508102.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:42.885Z,1520508102.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:43.279Z,1520508103.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:43.676Z,1520508103.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:44.067Z,1520508104.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:44.480Z,1520508104.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:44.880Z,1520508104.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:44.924Z,1520508104.924 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T11:21:45.280Z,1520508105.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:45.675Z,1520508105.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:46.076Z,1520508106.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:46.487Z,1520508106.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:46.879Z,1520508106.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:47.290Z,1520508107.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:47.754Z,1520508107.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:48.075Z,1520508108.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:48.485Z,1520508108.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:48.890Z,1520508108.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:49.294Z,1520508109.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:49.676Z,1520508109.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:50.077Z,1520508110.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:50.480Z,1520508110.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:50.875Z,1520508110.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:51.278Z,1520508111.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:51.694Z,1520508111.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:52.094Z,1520508112.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:52.480Z,1520508112.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:52.878Z,1520508112.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:53.280Z,1520508113.280 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:53.280Z,1520508113.280 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73
2018-03-08T11:21:53.280Z,1520508113.280 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T11:21:53.282Z,1520508113.282 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:53.282Z,1520508113.282 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73
2018-03-08T11:21:53.282Z,1520508113.282 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T11:21:53.284Z,1520508113.284 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:53.284Z,1520508113.284 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 73
2018-03-08T11:21:53.284Z,1520508113.284 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T11:21:53.296Z,1520508113.296 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T11:21:53.296Z,1520508113.296 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T11:21:53.297Z,1520508113.297 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T11:21:53.687Z,1520508113.687 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T11:21:53.687Z,1520508113.687 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73
2018-03-08T11:21:53.688Z,1520508113.688 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T11:21:53.688Z,1520508113.688 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73
2018-03-08T11:21:53.689Z,1520508113.689 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T11:21:53.689Z,1520508113.689 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 73
2018-03-08T11:21:54.078Z,1520508114.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T11:21:54.079Z,1520508114.079 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:21:54.079Z,1520508114.079 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:21:54.079Z,1520508114.079 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T11:21:54.080Z,1520508114.080 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:21:54.080Z,1520508114.080 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:21:54.081Z,1520508114.081 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T11:21:54.081Z,1520508114.081 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:21:54.081Z,1520508114.081 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:21:54.496Z,1520508114.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T11:21:54.497Z,1520508114.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:54.882Z,1520508114.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T11:21:54.883Z,1520508114.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:55.282Z,1520508115.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T11:21:55.283Z,1520508115.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:55.678Z,1520508115.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T11:21:55.679Z,1520508115.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:56.081Z,1520508116.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T11:21:56.082Z,1520508116.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:56.494Z,1520508116.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T11:21:56.495Z,1520508116.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:56.884Z,1520508116.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T11:21:56.885Z,1520508116.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:57.278Z,1520508117.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T11:21:57.279Z,1520508117.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:57.686Z,1520508117.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T11:21:57.687Z,1520508117.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:58.084Z,1520508118.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T11:21:58.085Z,1520508118.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:58.482Z,1520508118.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T11:21:58.483Z,1520508118.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:58.888Z,1520508118.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T11:21:58.889Z,1520508118.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:59.296Z,1520508119.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T11:21:59.297Z,1520508119.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:21:59.680Z,1520508119.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T11:21:59.681Z,1520508119.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:00.080Z,1520508120.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T11:22:00.081Z,1520508120.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:00.490Z,1520508120.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T11:22:00.491Z,1520508120.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:00.885Z,1520508120.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T11:22:00.886Z,1520508120.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:01.294Z,1520508121.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T11:22:01.295Z,1520508121.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:01.687Z,1520508121.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T11:22:01.688Z,1520508121.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:02.080Z,1520508122.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T11:22:02.081Z,1520508122.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:02.494Z,1520508122.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T11:22:02.495Z,1520508122.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:02.890Z,1520508122.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T11:22:02.891Z,1520508122.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:03.285Z,1520508123.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T11:22:03.286Z,1520508123.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:03.679Z,1520508123.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T11:22:03.680Z,1520508123.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:04.083Z,1520508124.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T11:22:04.084Z,1520508124.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:04.490Z,1520508124.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T11:22:04.491Z,1520508124.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:04.884Z,1520508124.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T11:22:04.885Z,1520508124.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:05.290Z,1520508125.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T11:22:05.291Z,1520508125.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:05.679Z,1520508125.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T11:22:05.681Z,1520508125.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:06.079Z,1520508126.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T11:22:06.079Z,1520508126.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:06.489Z,1520508126.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T11:22:06.490Z,1520508126.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:06.884Z,1520508126.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T11:22:06.885Z,1520508126.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:07.293Z,1520508127.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T11:22:07.294Z,1520508127.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:07.689Z,1520508127.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T11:22:07.690Z,1520508127.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:08.079Z,1520508128.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T11:22:08.080Z,1520508128.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:08.491Z,1520508128.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T11:22:08.492Z,1520508128.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:08.890Z,1520508128.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T11:22:08.891Z,1520508128.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:09.286Z,1520508129.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T11:22:09.287Z,1520508129.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:09.682Z,1520508129.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T11:22:09.683Z,1520508129.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:10.087Z,1520508130.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T11:22:10.088Z,1520508130.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:10.487Z,1520508130.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T11:22:10.487Z,1520508130.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:10.888Z,1520508130.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T11:22:10.889Z,1520508130.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:11.292Z,1520508131.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T11:22:11.297Z,1520508131.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:11.690Z,1520508131.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T11:22:11.691Z,1520508131.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:12.067Z,1520508132.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T11:22:12.069Z,1520508132.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:12.498Z,1520508132.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T11:22:12.499Z,1520508132.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:12.896Z,1520508132.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T11:22:12.897Z,1520508132.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:13.296Z,1520508133.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:13.667Z,1520508133.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:14.074Z,1520508134.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:14.471Z,1520508134.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:14.874Z,1520508134.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:15.301Z,1520508135.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:15.673Z,1520508135.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:16.084Z,1520508136.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:16.474Z,1520508136.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:16.869Z,1520508136.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:17.271Z,1520508137.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:17.669Z,1520508137.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:18.074Z,1520508138.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:18.484Z,1520508138.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:18.884Z,1520508138.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:19.277Z,1520508139.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:19.677Z,1520508139.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:20.074Z,1520508140.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:20.477Z,1520508140.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:20.880Z,1520508140.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:21.281Z,1520508141.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:21.670Z,1520508141.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:22.074Z,1520508142.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:22.477Z,1520508142.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:22.480Z,1520508142.480 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T11:17:22.2Z
2018-03-08T11:22:22.480Z,1520508142.480 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T11:22:22.480Z,1520508142.480 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T11:22:22.878Z,1520508142.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:23.371Z,1520508143.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:23.675Z,1520508143.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:26.773Z,1520508146.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:26.885Z,1520508146.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:27.209Z,1520508147.209 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0084.lzma
2018-03-08T11:22:27.218Z,1520508147.218 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T11:22:27.218Z,1520508147.218 [NAL9602] Data Fault, FailCount= 1
2018-03-08T11:22:27.218Z,1520508147.218 [NAL9602](ERROR): Data Fault
2018-03-08T11:22:27.279Z,1520508147.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:27.308Z,1520508147.308 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T11:22:27.612Z,1520508147.612 [NAL9602](INFO): Powering down
2018-03-08T11:22:27.675Z,1520508147.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:27.995Z,1520508147.995 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0084.lzma.bak
2018-03-08T11:22:27.995Z,1520508147.995 [DataOverHttps](INFO): SBD MOMSN=7985212
2018-03-08T11:22:28.061Z,1520508148.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:28.625Z,1520508148.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:28.638Z,1520508148.638 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T11:22:28.638Z,1520508148.638 [NAL9602] No Fault, FailCount= 1
2018-03-08T11:22:28.842Z,1520508148.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:31.970Z,1520508151.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:32.073Z,1520508152.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:32.450Z,1520508152.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:32.843Z,1520508152.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:33.261Z,1520508153.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:33.647Z,1520508153.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:34.049Z,1520508154.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:37.145Z,1520508157.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:37.260Z,1520508157.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:37.577Z,1520508157.577 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180308T074127/Express0085.lzma
2018-03-08T11:22:37.640Z,1520508157.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:38.036Z,1520508158.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:38.374Z,1520508158.374 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0085.lzma.bak
2018-03-08T11:22:38.375Z,1520508158.375 [DataOverHttps](INFO): SBD MOMSN=7985218
2018-03-08T11:22:38.441Z,1520508158.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:38.993Z,1520508158.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:38.996Z,1520508158.996 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T11:22:38.996Z,1520508158.996 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T11:22:38.996Z,1520508158.996 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T11:22:39.240Z,1520508159.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:42.495Z,1520508162.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:42.638Z,1520508162.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:42.966Z,1520508162.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:43.366Z,1520508163.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:43.764Z,1520508163.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:44.169Z,1520508164.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:44.567Z,1520508164.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:44.992Z,1520508164.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:45.368Z,1520508165.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:45.768Z,1520508165.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:46.161Z,1520508166.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:46.564Z,1520508166.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:46.967Z,1520508166.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:47.363Z,1520508167.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:47.774Z,1520508167.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:48.167Z,1520508168.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:48.568Z,1520508168.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:48.967Z,1520508168.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:49.367Z,1520508169.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:49.760Z,1520508169.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:50.170Z,1520508170.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:50.568Z,1520508170.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:50.964Z,1520508170.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:51.368Z,1520508171.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:51.763Z,1520508171.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:52.166Z,1520508172.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:52.566Z,1520508172.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:52.975Z,1520508172.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:53.365Z,1520508173.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:53.772Z,1520508173.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:54.183Z,1520508174.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:54.555Z,1520508174.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:54.981Z,1520508174.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:55.357Z,1520508175.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:55.760Z,1520508175.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:56.162Z,1520508176.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:56.561Z,1520508176.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:56.956Z,1520508176.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:57.367Z,1520508177.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:57.731Z,1520508177.731 [NAL9602](INFO): Powering up NAL9602
2018-03-08T11:22:57.764Z,1520508177.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:58.164Z,1520508178.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:58.567Z,1520508178.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:58.964Z,1520508178.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:59.371Z,1520508179.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:22:59.768Z,1520508179.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:00.168Z,1520508180.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:00.568Z,1520508180.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:00.968Z,1520508180.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:01.368Z,1520508181.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:01.760Z,1520508181.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:02.175Z,1520508182.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:02.567Z,1520508182.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:02.964Z,1520508182.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:03.367Z,1520508183.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:03.767Z,1520508183.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:04.162Z,1520508184.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:04.566Z,1520508184.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:04.970Z,1520508184.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:05.364Z,1520508185.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:05.766Z,1520508185.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:06.167Z,1520508186.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:06.564Z,1520508186.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:06.974Z,1520508186.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:07.365Z,1520508187.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:07.777Z,1520508187.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:08.210Z,1520508188.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:08.614Z,1520508188.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:08.926Z,1520508188.926 [NAL9602](INFO): NAL9602 initialized
2018-03-08T11:23:08.983Z,1520508188.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:09.375Z,1520508189.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:09.818Z,1520508189.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:10.210Z,1520508190.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:10.575Z,1520508190.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:10.999Z,1520508190.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:11.385Z,1520508191.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:11.779Z,1520508191.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:12.215Z,1520508192.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:12.597Z,1520508192.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:12.997Z,1520508192.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:13.386Z,1520508193.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:13.777Z,1520508193.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:14.162Z,1520508194.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:14.585Z,1520508194.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:14.988Z,1520508194.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:15.388Z,1520508195.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:15.767Z,1520508195.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:16.164Z,1520508196.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:16.594Z,1520508196.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:16.990Z,1520508196.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:17.387Z,1520508197.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:17.768Z,1520508197.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:18.167Z,1520508198.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:18.591Z,1520508198.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:18.988Z,1520508198.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:19.389Z,1520508199.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:19.764Z,1520508199.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:20.168Z,1520508200.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:20.593Z,1520508200.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:20.969Z,1520508200.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:21.392Z,1520508201.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:21.769Z,1520508201.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:22.164Z,1520508202.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:22.597Z,1520508202.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:23.003Z,1520508203.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:23.374Z,1520508203.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:23.773Z,1520508203.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:24.174Z,1520508204.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:24.573Z,1520508204.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:24.976Z,1520508204.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:25.378Z,1520508205.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:25.778Z,1520508205.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:26.170Z,1520508206.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:26.577Z,1520508206.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:26.972Z,1520508206.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:27.373Z,1520508207.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:27.779Z,1520508207.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:28.170Z,1520508208.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:28.573Z,1520508208.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:28.977Z,1520508208.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:29.373Z,1520508209.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:29.778Z,1520508209.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:30.183Z,1520508210.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:30.579Z,1520508210.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:30.985Z,1520508210.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:31.387Z,1520508211.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:31.773Z,1520508211.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:32.173Z,1520508212.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:32.586Z,1520508212.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:32.991Z,1520508212.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:33.380Z,1520508213.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:33.776Z,1520508213.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:34.178Z,1520508214.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:34.591Z,1520508214.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:34.988Z,1520508214.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:35.379Z,1520508215.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:35.783Z,1520508215.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:36.160Z,1520508216.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:36.587Z,1520508216.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:36.994Z,1520508216.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:37.393Z,1520508217.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:37.765Z,1520508217.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:38.164Z,1520508218.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:38.593Z,1520508218.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:38.985Z,1520508218.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:39.386Z,1520508219.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:39.767Z,1520508219.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:42.889Z,1520508222.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:43.038Z,1520508223.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:43.372Z,1520508223.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:43.764Z,1520508223.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:44.160Z,1520508224.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:44.562Z,1520508224.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:44.963Z,1520508224.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:45.362Z,1520508225.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:45.763Z,1520508225.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:46.170Z,1520508226.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:46.566Z,1520508226.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:46.959Z,1520508226.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:47.360Z,1520508227.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:47.757Z,1520508227.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:48.159Z,1520508228.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:48.568Z,1520508228.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:48.965Z,1520508228.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:49.364Z,1520508229.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:49.762Z,1520508229.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:50.165Z,1520508230.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:50.568Z,1520508230.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:50.974Z,1520508230.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:51.369Z,1520508231.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:51.763Z,1520508231.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:52.164Z,1520508232.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:52.575Z,1520508232.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:52.974Z,1520508232.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:53.375Z,1520508233.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:53.759Z,1520508233.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:54.170Z,1520508234.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:54.569Z,1520508234.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:54.966Z,1520508234.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:55.374Z,1520508235.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:55.765Z,1520508235.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:56.160Z,1520508236.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:56.566Z,1520508236.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:56.973Z,1520508236.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:57.378Z,1520508237.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:57.765Z,1520508237.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:58.167Z,1520508238.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:58.579Z,1520508238.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:58.973Z,1520508238.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:59.375Z,1520508239.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:23:59.764Z,1520508239.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:00.162Z,1520508240.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:00.573Z,1520508240.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:00.967Z,1520508240.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:01.368Z,1520508241.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:01.765Z,1520508241.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:02.166Z,1520508242.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:02.579Z,1520508242.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:02.979Z,1520508242.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:03.379Z,1520508243.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:03.764Z,1520508243.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:04.169Z,1520508244.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:04.574Z,1520508244.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:04.972Z,1520508244.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:05.374Z,1520508245.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:05.764Z,1520508245.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:06.171Z,1520508246.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:06.577Z,1520508246.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:06.969Z,1520508246.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:07.370Z,1520508247.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:07.773Z,1520508247.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:08.165Z,1520508248.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:08.579Z,1520508248.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:08.983Z,1520508248.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:09.378Z,1520508249.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:09.765Z,1520508249.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:10.163Z,1520508250.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:10.571Z,1520508250.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:10.973Z,1520508250.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:11.374Z,1520508251.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:11.766Z,1520508251.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:12.160Z,1520508252.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:12.579Z,1520508252.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:12.979Z,1520508252.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:13.379Z,1520508253.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:13.768Z,1520508253.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:14.161Z,1520508254.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:14.575Z,1520508254.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:14.971Z,1520508254.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:15.369Z,1520508255.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:15.767Z,1520508255.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:16.164Z,1520508256.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:16.579Z,1520508256.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:16.979Z,1520508256.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:17.377Z,1520508257.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:17.770Z,1520508257.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:18.171Z,1520508258.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:18.574Z,1520508258.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:18.978Z,1520508258.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:19.379Z,1520508259.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:19.771Z,1520508259.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:20.172Z,1520508260.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:20.572Z,1520508260.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:20.976Z,1520508260.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:21.379Z,1520508261.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:21.775Z,1520508261.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:22.151Z,1520508262.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:22.576Z,1520508262.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:22.980Z,1520508262.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:23.382Z,1520508263.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:23.759Z,1520508263.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:24.158Z,1520508264.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:24.568Z,1520508264.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:24.970Z,1520508264.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:25.372Z,1520508265.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:25.763Z,1520508265.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:26.161Z,1520508266.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:26.565Z,1520508266.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:26.965Z,1520508266.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:27.365Z,1520508267.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:27.763Z,1520508267.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:28.162Z,1520508268.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:28.563Z,1520508268.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:28.970Z,1520508268.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:29.364Z,1520508269.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:29.766Z,1520508269.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:30.158Z,1520508270.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:30.564Z,1520508270.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:30.970Z,1520508270.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:31.365Z,1520508271.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:31.765Z,1520508271.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:32.162Z,1520508272.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:32.564Z,1520508272.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:32.964Z,1520508272.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:33.368Z,1520508273.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:33.761Z,1520508273.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:34.163Z,1520508274.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:34.570Z,1520508274.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:34.969Z,1520508274.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:35.365Z,1520508275.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:35.763Z,1520508275.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:36.162Z,1520508276.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:36.566Z,1520508276.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:36.969Z,1520508276.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:37.363Z,1520508277.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:37.760Z,1520508277.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:38.160Z,1520508278.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:38.571Z,1520508278.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:38.968Z,1520508278.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:39.365Z,1520508279.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:39.762Z,1520508279.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:40.159Z,1520508280.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:43.291Z,1520508283.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:43.442Z,1520508283.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:43.776Z,1520508283.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:44.168Z,1520508284.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:44.575Z,1520508284.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:44.964Z,1520508284.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:45.368Z,1520508285.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:45.769Z,1520508285.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:46.172Z,1520508286.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:46.573Z,1520508286.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:46.966Z,1520508286.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:47.366Z,1520508287.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:47.765Z,1520508287.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:48.164Z,1520508288.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:48.574Z,1520508288.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:48.973Z,1520508288.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:49.369Z,1520508289.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:49.770Z,1520508289.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:50.174Z,1520508290.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:50.571Z,1520508290.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:50.972Z,1520508290.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:51.378Z,1520508291.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:51.768Z,1520508291.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:52.163Z,1520508292.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:52.582Z,1520508292.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:52.980Z,1520508292.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:53.382Z,1520508293.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:53.770Z,1520508293.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:54.170Z,1520508294.170 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:54.170Z,1520508294.170 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74
2018-03-08T11:24:54.170Z,1520508294.170 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T11:24:54.172Z,1520508294.172 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:54.172Z,1520508294.172 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74
2018-03-08T11:24:54.172Z,1520508294.172 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T11:24:54.174Z,1520508294.174 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:54.174Z,1520508294.174 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 74
2018-03-08T11:24:54.174Z,1520508294.174 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T11:24:54.186Z,1520508294.186 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T11:24:54.186Z,1520508294.186 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T11:24:54.186Z,1520508294.186 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T11:24:54.621Z,1520508294.621 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T11:24:54.621Z,1520508294.621 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74
2018-03-08T11:24:54.621Z,1520508294.621 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T11:24:54.622Z,1520508294.622 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74
2018-03-08T11:24:54.622Z,1520508294.622 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T11:24:54.622Z,1520508294.622 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 74
2018-03-08T11:24:54.988Z,1520508294.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T11:24:54.989Z,1520508294.989 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:24:54.989Z,1520508294.989 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:24:54.990Z,1520508294.990 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T11:24:54.990Z,1520508294.990 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:24:54.990Z,1520508294.990 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:24:54.991Z,1520508294.991 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T11:24:54.991Z,1520508294.991 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:24:54.991Z,1520508294.991 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:24:55.375Z,1520508295.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T11:24:55.376Z,1520508295.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:55.777Z,1520508295.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T11:24:55.778Z,1520508295.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:56.198Z,1520508296.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T11:24:56.199Z,1520508296.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:56.579Z,1520508296.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T11:24:56.580Z,1520508296.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:56.987Z,1520508296.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T11:24:56.988Z,1520508296.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:57.383Z,1520508297.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T11:24:57.385Z,1520508297.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:57.779Z,1520508297.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T11:24:57.780Z,1520508297.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:58.154Z,1520508298.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T11:24:58.155Z,1520508298.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:58.587Z,1520508298.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T11:24:58.589Z,1520508298.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:58.979Z,1520508298.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T11:24:58.981Z,1520508298.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:59.379Z,1520508299.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T11:24:59.379Z,1520508299.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:24:59.760Z,1520508299.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T11:24:59.761Z,1520508299.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:00.162Z,1520508300.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T11:25:00.163Z,1520508300.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:00.572Z,1520508300.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T11:25:00.596Z,1520508300.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:00.975Z,1520508300.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T11:25:00.976Z,1520508300.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:01.365Z,1520508301.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T11:25:01.365Z,1520508301.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:01.762Z,1520508301.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T11:25:01.763Z,1520508301.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:02.162Z,1520508302.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T11:25:02.163Z,1520508302.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:02.565Z,1520508302.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T11:25:02.566Z,1520508302.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:02.975Z,1520508302.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T11:25:02.993Z,1520508302.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:03.369Z,1520508303.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T11:25:03.369Z,1520508303.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:03.767Z,1520508303.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T11:25:03.768Z,1520508303.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:04.162Z,1520508304.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T11:25:04.163Z,1520508304.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:04.573Z,1520508304.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T11:25:04.574Z,1520508304.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:04.972Z,1520508304.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T11:25:04.973Z,1520508304.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:05.368Z,1520508305.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T11:25:05.369Z,1520508305.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:05.767Z,1520508305.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T11:25:05.768Z,1520508305.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:06.166Z,1520508306.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T11:25:06.166Z,1520508306.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:06.574Z,1520508306.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T11:25:06.575Z,1520508306.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:06.968Z,1520508306.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T11:25:06.969Z,1520508306.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:07.369Z,1520508307.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T11:25:07.370Z,1520508307.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:07.767Z,1520508307.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T11:25:07.768Z,1520508307.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:08.166Z,1520508308.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T11:25:08.167Z,1520508308.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:08.573Z,1520508308.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T11:25:08.574Z,1520508308.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:08.971Z,1520508308.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T11:25:08.972Z,1520508308.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:09.373Z,1520508309.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T11:25:09.374Z,1520508309.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:09.767Z,1520508309.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T11:25:09.769Z,1520508309.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:10.167Z,1520508310.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T11:25:10.168Z,1520508310.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:10.573Z,1520508310.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T11:25:10.573Z,1520508310.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:10.972Z,1520508310.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T11:25:10.973Z,1520508310.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:11.375Z,1520508311.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T11:25:11.376Z,1520508311.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:11.768Z,1520508311.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T11:25:11.769Z,1520508311.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:12.168Z,1520508312.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T11:25:12.169Z,1520508312.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:12.578Z,1520508312.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T11:25:12.579Z,1520508312.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:12.972Z,1520508312.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T11:25:12.973Z,1520508312.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:13.372Z,1520508313.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T11:25:13.373Z,1520508313.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:13.765Z,1520508313.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T11:25:13.766Z,1520508313.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:14.164Z,1520508314.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T11:25:14.165Z,1520508314.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:14.571Z,1520508314.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:14.976Z,1520508314.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:15.382Z,1520508315.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:15.768Z,1520508315.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:16.167Z,1520508316.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:16.577Z,1520508316.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:16.976Z,1520508316.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:17.373Z,1520508317.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:17.769Z,1520508317.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:18.175Z,1520508318.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:18.583Z,1520508318.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:18.976Z,1520508318.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:19.376Z,1520508319.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:19.769Z,1520508319.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:20.167Z,1520508320.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:20.583Z,1520508320.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:20.975Z,1520508320.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:21.376Z,1520508321.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:21.765Z,1520508321.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:22.164Z,1520508322.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:22.574Z,1520508322.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:22.983Z,1520508322.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:23.382Z,1520508323.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:23.769Z,1520508323.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:24.167Z,1520508324.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:24.574Z,1520508324.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:24.975Z,1520508324.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:25.376Z,1520508325.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:25.769Z,1520508325.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:26.163Z,1520508326.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:26.576Z,1520508326.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:26.982Z,1520508326.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:27.376Z,1520508327.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:27.763Z,1520508327.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:28.164Z,1520508328.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:28.577Z,1520508328.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:28.976Z,1520508328.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:29.378Z,1520508329.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:29.767Z,1520508329.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:30.166Z,1520508330.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:30.578Z,1520508330.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:30.977Z,1520508330.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:31.376Z,1520508331.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:31.767Z,1520508331.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:32.173Z,1520508332.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:32.582Z,1520508332.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:32.983Z,1520508332.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:33.379Z,1520508333.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:33.769Z,1520508333.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:34.176Z,1520508334.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:34.579Z,1520508334.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:34.975Z,1520508334.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:35.375Z,1520508335.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:35.769Z,1520508335.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:36.166Z,1520508336.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:36.574Z,1520508336.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:36.978Z,1520508336.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:37.381Z,1520508337.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:37.773Z,1520508337.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:38.169Z,1520508338.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:38.582Z,1520508338.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:38.979Z,1520508338.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:39.376Z,1520508339.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:39.768Z,1520508339.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:40.165Z,1520508340.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:43.274Z,1520508343.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:43.418Z,1520508343.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:43.770Z,1520508343.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:44.159Z,1520508344.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:44.563Z,1520508344.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:44.944Z,1520508344.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:45.343Z,1520508345.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:45.741Z,1520508345.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:46.162Z,1520508346.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:46.574Z,1520508346.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:46.939Z,1520508346.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:47.343Z,1520508347.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:47.745Z,1520508347.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:48.139Z,1520508348.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:48.563Z,1520508348.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:48.970Z,1520508348.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:49.366Z,1520508349.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:49.743Z,1520508349.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:50.144Z,1520508350.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:50.564Z,1520508350.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:50.963Z,1520508350.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:51.360Z,1520508351.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:51.744Z,1520508351.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:52.144Z,1520508352.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:52.573Z,1520508352.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:52.942Z,1520508352.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:53.370Z,1520508353.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:53.743Z,1520508353.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:54.140Z,1520508354.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:54.571Z,1520508354.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:54.945Z,1520508354.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:55.369Z,1520508355.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:55.744Z,1520508355.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:56.143Z,1520508356.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:56.544Z,1520508356.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:56.977Z,1520508356.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:57.349Z,1520508357.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:57.744Z,1520508357.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:58.144Z,1520508358.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:58.548Z,1520508358.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:58.947Z,1520508358.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:59.350Z,1520508359.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:25:59.747Z,1520508359.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:00.138Z,1520508360.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:00.548Z,1520508360.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:00.951Z,1520508360.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:01.348Z,1520508361.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:01.744Z,1520508361.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:02.146Z,1520508362.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:02.549Z,1520508362.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:02.953Z,1520508362.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:03.348Z,1520508363.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:03.747Z,1520508363.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:04.147Z,1520508364.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:04.558Z,1520508364.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:04.955Z,1520508364.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:05.352Z,1520508365.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:05.744Z,1520508365.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:06.147Z,1520508366.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:06.552Z,1520508366.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:06.953Z,1520508366.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:07.353Z,1520508367.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:07.745Z,1520508367.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:08.144Z,1520508368.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:08.558Z,1520508368.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:08.954Z,1520508368.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:09.353Z,1520508369.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:09.749Z,1520508369.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:10.150Z,1520508370.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:10.553Z,1520508370.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:10.953Z,1520508370.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:11.358Z,1520508371.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:11.749Z,1520508371.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:12.146Z,1520508372.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:12.551Z,1520508372.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:12.956Z,1520508372.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:13.355Z,1520508373.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:13.747Z,1520508373.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:14.147Z,1520508374.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:14.556Z,1520508374.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:14.955Z,1520508374.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:15.356Z,1520508375.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:15.749Z,1520508375.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:16.144Z,1520508376.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:16.557Z,1520508376.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:16.952Z,1520508376.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:17.352Z,1520508377.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:17.745Z,1520508377.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:18.145Z,1520508378.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:18.554Z,1520508378.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:18.955Z,1520508378.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:19.356Z,1520508379.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:19.745Z,1520508379.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:20.143Z,1520508380.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:20.557Z,1520508380.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:20.955Z,1520508380.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:21.357Z,1520508381.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:21.745Z,1520508381.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:22.156Z,1520508382.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:22.557Z,1520508382.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:22.962Z,1520508382.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:23.355Z,1520508383.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:23.756Z,1520508383.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:24.150Z,1520508384.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:24.554Z,1520508384.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:24.958Z,1520508384.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:25.359Z,1520508385.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:25.750Z,1520508385.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:26.162Z,1520508386.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:26.557Z,1520508386.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:26.970Z,1520508386.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:27.367Z,1520508387.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:27.750Z,1520508387.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:28.151Z,1520508388.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:28.558Z,1520508388.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:28.962Z,1520508388.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:29.354Z,1520508389.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:29.751Z,1520508389.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:30.148Z,1520508390.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:30.567Z,1520508390.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:30.961Z,1520508390.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:31.362Z,1520508391.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:31.762Z,1520508391.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:32.158Z,1520508392.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:32.562Z,1520508392.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:32.965Z,1520508392.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:33.365Z,1520508393.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:33.756Z,1520508393.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:34.156Z,1520508394.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:34.565Z,1520508394.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:34.962Z,1520508394.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:35.359Z,1520508395.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:35.753Z,1520508395.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:36.139Z,1520508396.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:36.561Z,1520508396.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:36.969Z,1520508396.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:37.361Z,1520508397.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:37.744Z,1520508397.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:38.147Z,1520508398.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:38.569Z,1520508398.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:38.973Z,1520508398.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:39.376Z,1520508399.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:39.742Z,1520508399.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:40.141Z,1520508400.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:40.576Z,1520508400.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:43.674Z,1520508403.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:43.822Z,1520508403.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:44.151Z,1520508404.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:44.549Z,1520508404.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:44.951Z,1520508404.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:45.344Z,1520508405.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:45.774Z,1520508405.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:46.102Z,1520508406.102 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-03-08T11:26:46.102Z,1520508406.102 [DropWeight] Hardware Fault, FailCount= 1
2018-03-08T11:26:46.102Z,1520508406.102 [DropWeight](ERROR): Hardware Fault
2018-03-08T11:26:46.165Z,1520508406.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:46.186Z,1520508406.186 [CBIT](INFO): Critical error at 20180308T112646
2018-03-08T11:26:46.188Z,1520508406.188 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-03-08T11:26:46.197Z,1520508406.197 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-03-08T11:26:46.575Z,1520508406.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:46.586Z,1520508406.586 [CBIT](INFO): Critical error at 20180308T112646
2018-03-08T11:26:46.950Z,1520508406.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:47.348Z,1520508407.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:47.748Z,1520508407.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:48.148Z,1520508408.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:48.576Z,1520508408.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:48.954Z,1520508408.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:49.375Z,1520508409.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:49.745Z,1520508409.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:50.145Z,1520508410.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:50.555Z,1520508410.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:50.953Z,1520508410.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:51.353Z,1520508411.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:51.750Z,1520508411.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:52.149Z,1520508412.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:52.551Z,1520508412.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:52.957Z,1520508412.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:53.353Z,1520508413.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:53.745Z,1520508413.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:54.147Z,1520508414.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:54.556Z,1520508414.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:54.961Z,1520508414.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:55.366Z,1520508415.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:55.750Z,1520508415.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:56.158Z,1520508416.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:56.566Z,1520508416.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:56.960Z,1520508416.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:57.370Z,1520508417.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:57.759Z,1520508417.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:58.155Z,1520508418.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:58.566Z,1520508418.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:58.964Z,1520508418.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:59.360Z,1520508419.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:26:59.739Z,1520508419.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:00.167Z,1520508420.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:00.565Z,1520508420.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:00.974Z,1520508420.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:01.373Z,1520508421.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:01.743Z,1520508421.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:02.145Z,1520508422.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:02.569Z,1520508422.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:02.973Z,1520508422.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:03.377Z,1520508423.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:03.745Z,1520508423.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:04.147Z,1520508424.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:04.580Z,1520508424.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:04.953Z,1520508424.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:05.377Z,1520508425.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:05.752Z,1520508425.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:06.155Z,1520508426.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:06.552Z,1520508426.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:06.951Z,1520508426.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:07.354Z,1520508427.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:07.750Z,1520508427.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:08.154Z,1520508428.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:08.555Z,1520508428.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:08.952Z,1520508428.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:09.352Z,1520508429.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:09.751Z,1520508429.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:10.149Z,1520508430.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:10.587Z,1520508430.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:10.958Z,1520508430.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:11.355Z,1520508431.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:11.747Z,1520508431.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:12.155Z,1520508432.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:12.556Z,1520508432.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:12.962Z,1520508432.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:13.356Z,1520508433.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:13.750Z,1520508433.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:14.145Z,1520508434.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:14.556Z,1520508434.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:14.955Z,1520508434.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:15.362Z,1520508435.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:15.756Z,1520508435.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:16.151Z,1520508436.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:16.556Z,1520508436.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:16.957Z,1520508436.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:17.356Z,1520508437.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:17.747Z,1520508437.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:18.155Z,1520508438.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:18.555Z,1520508438.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:18.962Z,1520508438.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:19.355Z,1520508439.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:19.750Z,1520508439.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:20.147Z,1520508440.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:20.562Z,1520508440.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:20.956Z,1520508440.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:21.362Z,1520508441.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:21.751Z,1520508441.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:22.185Z,1520508442.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:22.566Z,1520508442.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:22.954Z,1520508442.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:23.357Z,1520508443.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:23.756Z,1520508443.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:24.157Z,1520508444.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:24.556Z,1520508444.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:24.963Z,1520508444.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:25.363Z,1520508445.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:25.753Z,1520508445.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:26.150Z,1520508446.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:26.570Z,1520508446.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:26.971Z,1520508446.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:27.370Z,1520508447.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:27.756Z,1520508447.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:28.147Z,1520508448.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:28.559Z,1520508448.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:28.963Z,1520508448.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:29.361Z,1520508449.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:29.757Z,1520508449.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:30.147Z,1520508450.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:30.561Z,1520508450.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:30.961Z,1520508450.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:31.366Z,1520508451.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:31.754Z,1520508451.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:32.156Z,1520508452.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:32.566Z,1520508452.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:32.965Z,1520508452.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:33.366Z,1520508453.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:33.755Z,1520508453.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:34.154Z,1520508454.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:34.574Z,1520508454.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:34.967Z,1520508454.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:35.360Z,1520508455.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:35.754Z,1520508455.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:36.143Z,1520508456.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:36.561Z,1520508456.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:36.970Z,1520508456.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:37.361Z,1520508457.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:37.754Z,1520508457.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:38.164Z,1520508458.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:38.570Z,1520508458.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:38.966Z,1520508458.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:39.370Z,1520508459.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:39.373Z,1520508459.373 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T11:27:39.373Z,1520508459.373 [Default:CheckIn:C.Wait] Stopped
2018-03-08T11:27:39.373Z,1520508459.373 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T11:27:39.373Z,1520508459.373 [Default:CheckIn:D] Running Loop=1
2018-03-08T11:27:39.739Z,1520508459.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:39.754Z,1520508459.754 [Default:CheckIn:D] Stopped
2018-03-08T11:27:39.754Z,1520508459.754 [Default:CheckIn:E] Running Loop=1
2018-03-08T11:27:40.142Z,1520508460.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:40.161Z,1520508460.161 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 221.915820 min 
2018-03-08T11:27:40.161Z,1520508460.161 [Default:CheckIn:E] Stopped
2018-03-08T11:27:40.161Z,1520508460.161 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T11:27:40.161Z,1520508460.161 [Default:CheckIn] Stopped
2018-03-08T11:27:40.162Z,1520508460.162 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T11:27:40.162Z,1520508460.162 [Default:CheckIn](INFO): Running loop #22
2018-03-08T11:27:40.162Z,1520508460.162 [Default:CheckIn] Running Loop=22
2018-03-08T11:27:40.162Z,1520508460.162 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T11:27:40.162Z,1520508460.162 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T11:27:40.565Z,1520508460.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:43.667Z,1520508463.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:43.811Z,1520508463.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:44.141Z,1520508464.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:44.540Z,1520508464.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:44.943Z,1520508464.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:45.337Z,1520508465.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:45.741Z,1520508465.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:46.145Z,1520508466.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:46.541Z,1520508466.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:46.939Z,1520508466.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:47.341Z,1520508467.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:47.739Z,1520508467.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:48.137Z,1520508468.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:48.541Z,1520508468.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:48.952Z,1520508468.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:49.342Z,1520508469.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:49.737Z,1520508469.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:50.152Z,1520508470.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:50.545Z,1520508470.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:50.949Z,1520508470.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:51.347Z,1520508471.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:51.743Z,1520508471.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:52.146Z,1520508472.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:52.554Z,1520508472.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:52.948Z,1520508472.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:53.355Z,1520508473.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:53.744Z,1520508473.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:54.146Z,1520508474.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:54.547Z,1520508474.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:54.954Z,1520508474.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:55.347Z,1520508475.347 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:55.347Z,1520508475.347 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75
2018-03-08T11:27:55.347Z,1520508475.347 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T11:27:55.349Z,1520508475.349 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:55.350Z,1520508475.350 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75
2018-03-08T11:27:55.350Z,1520508475.350 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T11:27:55.351Z,1520508475.351 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:55.351Z,1520508475.351 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 75
2018-03-08T11:27:55.351Z,1520508475.351 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T11:27:55.379Z,1520508475.379 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T11:27:55.380Z,1520508475.380 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T11:27:55.380Z,1520508475.380 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T11:27:55.750Z,1520508475.750 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T11:27:55.750Z,1520508475.750 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75
2018-03-08T11:27:55.750Z,1520508475.750 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T11:27:55.750Z,1520508475.750 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75
2018-03-08T11:27:55.751Z,1520508475.751 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T11:27:55.751Z,1520508475.751 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 75
2018-03-08T11:27:56.145Z,1520508476.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T11:27:56.146Z,1520508476.146 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:27:56.146Z,1520508476.146 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:27:56.146Z,1520508476.146 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T11:27:56.147Z,1520508476.147 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:27:56.147Z,1520508476.147 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:27:56.147Z,1520508476.147 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T11:27:56.148Z,1520508476.148 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:27:56.148Z,1520508476.148 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:27:56.599Z,1520508476.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-03-08T11:27:56.600Z,1520508476.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:56.955Z,1520508476.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T11:27:56.956Z,1520508476.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:57.352Z,1520508477.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T11:27:57.353Z,1520508477.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:57.731Z,1520508477.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T11:27:57.732Z,1520508477.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:58.155Z,1520508478.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T11:27:58.156Z,1520508478.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:58.555Z,1520508478.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T11:27:58.555Z,1520508478.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:58.956Z,1520508478.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T11:27:58.957Z,1520508478.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:59.354Z,1520508479.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T11:27:59.355Z,1520508479.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:27:59.735Z,1520508479.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T11:27:59.736Z,1520508479.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:00.141Z,1520508480.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T11:28:00.142Z,1520508480.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:00.554Z,1520508480.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T11:28:00.555Z,1520508480.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:00.954Z,1520508480.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T11:28:00.955Z,1520508480.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:01.362Z,1520508481.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T11:28:01.363Z,1520508481.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:01.743Z,1520508481.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T11:28:01.744Z,1520508481.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:02.159Z,1520508482.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T11:28:02.160Z,1520508482.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:02.554Z,1520508482.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T11:28:02.555Z,1520508482.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:02.951Z,1520508482.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T11:28:02.953Z,1520508482.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:03.358Z,1520508483.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T11:28:03.359Z,1520508483.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:03.750Z,1520508483.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T11:28:03.751Z,1520508483.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:04.142Z,1520508484.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T11:28:04.143Z,1520508484.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:04.550Z,1520508484.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T11:28:04.551Z,1520508484.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:04.949Z,1520508484.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T11:28:04.950Z,1520508484.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:05.346Z,1520508485.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T11:28:05.347Z,1520508485.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:05.744Z,1520508485.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T11:28:05.745Z,1520508485.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:06.137Z,1520508486.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T11:28:06.138Z,1520508486.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:06.550Z,1520508486.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T11:28:06.551Z,1520508486.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:06.958Z,1520508486.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T11:28:06.959Z,1520508486.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:07.358Z,1520508487.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T11:28:07.359Z,1520508487.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:07.741Z,1520508487.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T11:28:07.742Z,1520508487.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:08.146Z,1520508488.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T11:28:08.147Z,1520508488.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:08.560Z,1520508488.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T11:28:08.561Z,1520508488.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:08.952Z,1520508488.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T11:28:08.953Z,1520508488.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:09.353Z,1520508489.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T11:28:09.354Z,1520508489.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:09.743Z,1520508489.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T11:28:09.743Z,1520508489.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:10.143Z,1520508490.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T11:28:10.144Z,1520508490.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:10.553Z,1520508490.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T11:28:10.554Z,1520508490.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:10.962Z,1520508490.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T11:28:10.963Z,1520508490.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:11.361Z,1520508491.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T11:28:11.362Z,1520508491.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:11.738Z,1520508491.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T11:28:11.739Z,1520508491.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:12.139Z,1520508492.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T11:28:12.140Z,1520508492.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:12.548Z,1520508492.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T11:28:12.565Z,1520508492.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:12.952Z,1520508492.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T11:28:12.973Z,1520508492.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:13.346Z,1520508493.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T11:28:13.347Z,1520508493.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:13.738Z,1520508493.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T11:28:13.739Z,1520508493.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:14.146Z,1520508494.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T11:28:14.147Z,1520508494.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:14.545Z,1520508494.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T11:28:14.546Z,1520508494.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:14.954Z,1520508494.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T11:28:14.955Z,1520508494.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:15.354Z,1520508495.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:15.743Z,1520508495.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:16.134Z,1520508496.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:16.548Z,1520508496.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:16.949Z,1520508496.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:17.344Z,1520508497.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:17.741Z,1520508497.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:18.143Z,1520508498.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:18.547Z,1520508498.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:18.955Z,1520508498.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:19.347Z,1520508499.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:19.738Z,1520508499.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:20.147Z,1520508500.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:20.553Z,1520508500.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:20.953Z,1520508500.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:21.349Z,1520508501.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:21.751Z,1520508501.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:22.142Z,1520508502.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:22.561Z,1520508502.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:22.956Z,1520508502.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:23.358Z,1520508503.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:23.740Z,1520508503.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:24.141Z,1520508504.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:24.547Z,1520508504.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:24.955Z,1520508504.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:25.354Z,1520508505.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:25.747Z,1520508505.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:26.145Z,1520508506.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:26.554Z,1520508506.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:26.949Z,1520508506.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:27.355Z,1520508507.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:27.749Z,1520508507.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:28.150Z,1520508508.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:28.555Z,1520508508.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:28.954Z,1520508508.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:29.349Z,1520508509.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:29.746Z,1520508509.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:30.154Z,1520508510.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:30.557Z,1520508510.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:30.963Z,1520508510.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:31.357Z,1520508511.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:31.738Z,1520508511.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:32.139Z,1520508512.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:32.566Z,1520508512.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:32.957Z,1520508512.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:33.373Z,1520508513.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:33.737Z,1520508513.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:34.139Z,1520508514.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:34.545Z,1520508514.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:34.949Z,1520508514.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:35.345Z,1520508515.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:35.743Z,1520508515.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:36.143Z,1520508516.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:36.540Z,1520508516.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:36.965Z,1520508516.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:37.365Z,1520508517.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:37.739Z,1520508517.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:38.165Z,1520508518.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:38.538Z,1520508518.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:38.958Z,1520508518.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:39.361Z,1520508519.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:39.737Z,1520508519.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:40.138Z,1520508520.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:40.559Z,1520508520.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:40.963Z,1520508520.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:44.063Z,1520508524.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:44.190Z,1520508524.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:44.540Z,1520508524.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:44.936Z,1520508524.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:45.335Z,1520508525.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:45.765Z,1520508525.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:46.144Z,1520508526.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:46.541Z,1520508526.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:46.938Z,1520508526.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:47.334Z,1520508527.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:47.734Z,1520508527.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:48.133Z,1520508528.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:48.546Z,1520508528.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:48.943Z,1520508528.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:49.343Z,1520508529.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:49.736Z,1520508529.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:50.133Z,1520508530.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:50.549Z,1520508530.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:50.947Z,1520508530.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:51.347Z,1520508531.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:51.740Z,1520508531.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:52.138Z,1520508532.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:52.554Z,1520508532.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:52.947Z,1520508532.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:53.345Z,1520508533.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:53.735Z,1520508533.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:54.135Z,1520508534.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:54.545Z,1520508534.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:54.944Z,1520508534.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:55.347Z,1520508535.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:55.735Z,1520508535.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:56.134Z,1520508536.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:56.550Z,1520508536.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:56.947Z,1520508536.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:57.347Z,1520508537.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:57.739Z,1520508537.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:58.138Z,1520508538.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:58.549Z,1520508538.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:58.954Z,1520508538.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:59.354Z,1520508539.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:28:59.739Z,1520508539.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:00.138Z,1520508540.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:00.585Z,1520508540.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:00.978Z,1520508540.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:01.358Z,1520508541.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:01.756Z,1520508541.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:02.145Z,1520508542.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:02.562Z,1520508542.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:02.955Z,1520508542.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:03.358Z,1520508543.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:03.747Z,1520508543.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:04.152Z,1520508544.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:04.547Z,1520508544.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:04.927Z,1520508544.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:05.329Z,1520508545.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:05.721Z,1520508545.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:06.130Z,1520508546.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:06.554Z,1520508546.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:06.957Z,1520508546.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:07.360Z,1520508547.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:07.731Z,1520508547.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:08.123Z,1520508548.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:08.557Z,1520508548.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:08.953Z,1520508548.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:09.355Z,1520508549.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:09.731Z,1520508549.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:10.130Z,1520508550.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:10.555Z,1520508550.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:10.959Z,1520508550.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:11.355Z,1520508551.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:11.727Z,1520508551.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:12.135Z,1520508552.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:12.533Z,1520508552.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:12.934Z,1520508552.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:13.356Z,1520508553.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:13.761Z,1520508553.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:14.137Z,1520508554.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:14.533Z,1520508554.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:14.936Z,1520508554.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:15.326Z,1520508555.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:15.761Z,1520508555.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:16.163Z,1520508556.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:16.561Z,1520508556.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:16.935Z,1520508556.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:17.335Z,1520508557.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:17.734Z,1520508557.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:18.135Z,1520508558.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:18.562Z,1520508558.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:18.932Z,1520508558.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:19.341Z,1520508559.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:19.736Z,1520508559.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:20.139Z,1520508560.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:20.565Z,1520508560.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:20.944Z,1520508560.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:21.342Z,1520508561.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:21.739Z,1520508561.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:22.138Z,1520508562.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:22.550Z,1520508562.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:22.950Z,1520508562.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:23.344Z,1520508563.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:23.734Z,1520508563.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:24.135Z,1520508564.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:24.545Z,1520508564.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:24.944Z,1520508564.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:25.343Z,1520508565.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:25.735Z,1520508565.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:26.132Z,1520508566.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:26.552Z,1520508566.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:26.945Z,1520508566.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:27.344Z,1520508567.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:27.738Z,1520508567.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:28.138Z,1520508568.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:28.544Z,1520508568.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:28.950Z,1520508568.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:29.345Z,1520508569.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:29.733Z,1520508569.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:30.132Z,1520508570.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:30.548Z,1520508570.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:30.944Z,1520508570.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:31.350Z,1520508571.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:31.739Z,1520508571.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:32.133Z,1520508572.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:32.544Z,1520508572.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:32.948Z,1520508572.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:33.354Z,1520508573.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:33.743Z,1520508573.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:34.144Z,1520508574.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:34.545Z,1520508574.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:34.957Z,1520508574.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:35.347Z,1520508575.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:35.732Z,1520508575.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:36.146Z,1520508576.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:36.547Z,1520508576.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:36.953Z,1520508576.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:37.353Z,1520508577.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:37.748Z,1520508577.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:38.119Z,1520508578.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:38.547Z,1520508578.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:38.953Z,1520508578.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:39.358Z,1520508579.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:39.750Z,1520508579.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:40.125Z,1520508580.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:40.556Z,1520508580.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:40.951Z,1520508580.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:41.354Z,1520508581.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:44.423Z,1520508584.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:44.549Z,1520508584.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:44.931Z,1520508584.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:45.326Z,1520508585.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:45.734Z,1520508585.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:46.116Z,1520508586.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:46.520Z,1520508586.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:46.915Z,1520508586.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:47.317Z,1520508587.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:47.723Z,1520508587.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:48.128Z,1520508588.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:48.526Z,1520508588.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:48.914Z,1520508588.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:49.322Z,1520508589.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:49.722Z,1520508589.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:50.110Z,1520508590.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:50.507Z,1520508590.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:50.931Z,1520508590.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:51.331Z,1520508591.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:51.736Z,1520508591.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:52.130Z,1520508592.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:52.510Z,1520508592.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:52.935Z,1520508592.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:53.314Z,1520508593.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:53.724Z,1520508593.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:54.120Z,1520508594.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:54.517Z,1520508594.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:54.915Z,1520508594.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:55.318Z,1520508595.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:55.717Z,1520508595.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:56.120Z,1520508596.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:56.516Z,1520508596.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:56.923Z,1520508596.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:57.324Z,1520508597.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:57.724Z,1520508597.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:58.116Z,1520508598.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:58.511Z,1520508598.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:58.918Z,1520508598.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:59.318Z,1520508599.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:29:59.724Z,1520508599.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:00.126Z,1520508600.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:00.523Z,1520508600.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:00.919Z,1520508600.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:01.314Z,1520508601.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:01.718Z,1520508601.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:02.115Z,1520508602.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:02.515Z,1520508602.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:02.923Z,1520508602.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:03.324Z,1520508603.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:03.723Z,1520508603.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:04.124Z,1520508604.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:04.518Z,1520508604.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:04.922Z,1520508604.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:05.320Z,1520508605.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:05.729Z,1520508605.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:06.128Z,1520508606.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:06.527Z,1520508606.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:06.919Z,1520508606.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:07.314Z,1520508607.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:07.718Z,1520508607.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:08.120Z,1520508608.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:08.514Z,1520508608.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:08.923Z,1520508608.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:09.332Z,1520508609.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:09.735Z,1520508609.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:10.119Z,1520508610.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:10.520Z,1520508610.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:10.922Z,1520508610.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:11.319Z,1520508611.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:11.730Z,1520508611.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:12.129Z,1520508612.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:12.530Z,1520508612.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:12.920Z,1520508612.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:13.322Z,1520508613.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:13.725Z,1520508613.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:14.125Z,1520508614.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:14.525Z,1520508614.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:14.930Z,1520508614.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:15.333Z,1520508615.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:15.731Z,1520508615.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:16.129Z,1520508616.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:16.527Z,1520508616.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:16.924Z,1520508616.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:17.326Z,1520508617.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:17.732Z,1520508617.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:18.131Z,1520508618.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:18.524Z,1520508618.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:18.926Z,1520508618.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:19.327Z,1520508619.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:19.705Z,1520508619.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:20.111Z,1520508620.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:20.535Z,1520508620.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:20.941Z,1520508620.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:21.339Z,1520508621.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:21.741Z,1520508621.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:22.110Z,1520508622.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:22.518Z,1520508622.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:22.915Z,1520508622.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:23.310Z,1520508623.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:23.741Z,1520508623.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:24.120Z,1520508624.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:24.528Z,1520508624.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:24.915Z,1520508624.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:25.312Z,1520508625.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:25.707Z,1520508625.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:26.117Z,1520508626.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:26.522Z,1520508626.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:26.923Z,1520508626.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:27.324Z,1520508627.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:27.723Z,1520508627.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:28.116Z,1520508628.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:28.523Z,1520508628.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:28.920Z,1520508628.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:29.312Z,1520508629.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:29.724Z,1520508629.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:30.129Z,1520508630.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:30.522Z,1520508630.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:30.926Z,1520508630.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:31.322Z,1520508631.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:31.717Z,1520508631.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:32.119Z,1520508632.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:32.522Z,1520508632.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:32.923Z,1520508632.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:33.324Z,1520508633.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:33.724Z,1520508633.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:34.118Z,1520508634.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:34.527Z,1520508634.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:34.918Z,1520508634.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:35.318Z,1520508635.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:35.730Z,1520508635.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:36.124Z,1520508636.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:36.524Z,1520508636.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:36.920Z,1520508636.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:37.318Z,1520508637.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:37.715Z,1520508637.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:38.115Z,1520508638.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:38.519Z,1520508638.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:38.928Z,1520508638.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:39.332Z,1520508639.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:39.728Z,1520508639.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:40.117Z,1520508640.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:40.520Z,1520508640.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:40.923Z,1520508640.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:41.320Z,1520508641.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:41.722Z,1520508641.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:44.836Z,1520508644.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:44.991Z,1520508644.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:45.328Z,1520508645.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:45.725Z,1520508645.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:46.130Z,1520508646.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:46.530Z,1520508646.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:46.935Z,1520508646.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:47.339Z,1520508647.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:47.739Z,1520508647.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:48.135Z,1520508648.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:48.529Z,1520508648.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:48.930Z,1520508648.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:49.335Z,1520508649.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:49.735Z,1520508649.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:50.135Z,1520508650.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:50.535Z,1520508650.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:50.929Z,1520508650.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:51.327Z,1520508651.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:51.730Z,1520508651.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:52.126Z,1520508652.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:52.535Z,1520508652.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:52.939Z,1520508652.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:53.335Z,1520508653.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:53.731Z,1520508653.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:54.135Z,1520508654.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:54.535Z,1520508654.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:54.936Z,1520508654.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:55.336Z,1520508655.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:55.726Z,1520508655.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:56.126Z,1520508656.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:56.529Z,1520508656.529 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:56.529Z,1520508656.529 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76
2018-03-08T11:30:56.529Z,1520508656.529 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T11:30:56.531Z,1520508656.531 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:56.531Z,1520508656.531 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76
2018-03-08T11:30:56.531Z,1520508656.531 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T11:30:56.533Z,1520508656.533 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:56.534Z,1520508656.534 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 76
2018-03-08T11:30:56.534Z,1520508656.534 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T11:30:56.545Z,1520508656.545 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T11:30:56.546Z,1520508656.546 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T11:30:56.546Z,1520508656.546 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T11:30:56.949Z,1520508656.949 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T11:30:56.949Z,1520508656.949 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76
2018-03-08T11:30:56.950Z,1520508656.950 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T11:30:56.950Z,1520508656.950 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76
2018-03-08T11:30:56.950Z,1520508656.950 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T11:30:56.950Z,1520508656.950 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 76
2018-03-08T11:30:57.340Z,1520508657.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T11:30:57.340Z,1520508657.340 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:30:57.340Z,1520508657.340 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:30:57.341Z,1520508657.341 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T11:30:57.341Z,1520508657.341 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:30:57.341Z,1520508657.341 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:30:57.342Z,1520508657.342 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T11:30:57.342Z,1520508657.342 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:30:57.342Z,1520508657.342 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:30:57.740Z,1520508657.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T11:30:57.741Z,1520508657.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:58.129Z,1520508658.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T11:30:58.130Z,1520508658.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:58.528Z,1520508658.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T11:30:58.529Z,1520508658.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:58.935Z,1520508658.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T11:30:58.941Z,1520508658.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:59.331Z,1520508659.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T11:30:59.332Z,1520508659.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:30:59.740Z,1520508659.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T11:30:59.741Z,1520508659.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:00.150Z,1520508660.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T11:31:00.151Z,1520508660.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:00.539Z,1520508660.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T11:31:00.540Z,1520508660.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:00.939Z,1520508660.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T11:31:00.940Z,1520508660.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:01.334Z,1520508661.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T11:31:01.335Z,1520508661.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:01.735Z,1520508661.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T11:31:01.736Z,1520508661.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:02.137Z,1520508662.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T11:31:02.138Z,1520508662.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:02.536Z,1520508662.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T11:31:02.537Z,1520508662.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:02.941Z,1520508662.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T11:31:02.942Z,1520508662.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:03.346Z,1520508663.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T11:31:03.347Z,1520508663.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:03.750Z,1520508663.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T11:31:03.751Z,1520508663.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:04.117Z,1520508664.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T11:31:04.118Z,1520508664.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:04.521Z,1520508664.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T11:31:04.522Z,1520508664.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:04.920Z,1520508664.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T11:31:04.921Z,1520508664.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:05.322Z,1520508665.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T11:31:05.323Z,1520508665.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:05.748Z,1520508665.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T11:31:05.749Z,1520508665.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:06.154Z,1520508666.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T11:31:06.155Z,1520508666.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:06.544Z,1520508666.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T11:31:06.545Z,1520508666.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:06.950Z,1520508666.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T11:31:06.951Z,1520508666.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:07.350Z,1520508667.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T11:31:07.351Z,1520508667.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:07.726Z,1520508667.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T11:31:07.727Z,1520508667.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:08.130Z,1520508668.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T11:31:08.131Z,1520508668.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:08.554Z,1520508668.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T11:31:08.555Z,1520508668.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:08.940Z,1520508668.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T11:31:08.957Z,1520508668.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:09.338Z,1520508669.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T11:31:09.339Z,1520508669.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:09.727Z,1520508669.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T11:31:09.728Z,1520508669.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:10.126Z,1520508670.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T11:31:10.127Z,1520508670.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:10.529Z,1520508670.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T11:31:10.530Z,1520508670.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:10.933Z,1520508670.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T11:31:10.934Z,1520508670.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:11.337Z,1520508671.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T11:31:11.338Z,1520508671.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:11.734Z,1520508671.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T11:31:11.735Z,1520508671.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:12.127Z,1520508672.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T11:31:12.129Z,1520508672.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:12.525Z,1520508672.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T11:31:12.526Z,1520508672.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:12.930Z,1520508672.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T11:31:12.931Z,1520508672.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:13.330Z,1520508673.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T11:31:13.331Z,1520508673.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:13.732Z,1520508673.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T11:31:13.733Z,1520508673.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:14.134Z,1520508674.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T11:31:14.135Z,1520508674.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:14.532Z,1520508674.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T11:31:14.534Z,1520508674.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:14.928Z,1520508674.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T11:31:14.929Z,1520508674.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:15.334Z,1520508675.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T11:31:15.335Z,1520508675.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:15.735Z,1520508675.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T11:31:15.736Z,1520508675.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:16.126Z,1520508676.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T11:31:16.127Z,1520508676.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:16.532Z,1520508676.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:16.931Z,1520508676.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:17.337Z,1520508677.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:17.733Z,1520508677.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:18.128Z,1520508678.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:18.532Z,1520508678.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:18.937Z,1520508678.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:19.332Z,1520508679.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:19.730Z,1520508679.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:20.130Z,1520508680.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:20.533Z,1520508680.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:20.934Z,1520508680.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:21.339Z,1520508681.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:21.719Z,1520508681.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:22.126Z,1520508682.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:22.526Z,1520508682.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:22.932Z,1520508682.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:23.332Z,1520508683.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:23.738Z,1520508683.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:24.122Z,1520508684.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:24.530Z,1520508684.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:24.930Z,1520508684.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:25.329Z,1520508685.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:25.734Z,1520508685.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:26.131Z,1520508686.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:26.531Z,1520508686.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:26.924Z,1520508686.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:27.330Z,1520508687.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:27.730Z,1520508687.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:28.126Z,1520508688.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:28.527Z,1520508688.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:28.931Z,1520508688.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:29.337Z,1520508689.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:29.739Z,1520508689.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:30.121Z,1520508690.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:30.530Z,1520508690.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:30.934Z,1520508690.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:31.335Z,1520508691.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:31.735Z,1520508691.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:32.136Z,1520508692.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:32.532Z,1520508692.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:32.929Z,1520508692.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:33.327Z,1520508693.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:33.723Z,1520508693.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:34.126Z,1520508694.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:34.530Z,1520508694.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:34.941Z,1520508694.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:35.336Z,1520508695.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:35.739Z,1520508695.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:36.123Z,1520508696.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:36.539Z,1520508696.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:36.931Z,1520508696.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:37.331Z,1520508697.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:37.736Z,1520508697.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:38.136Z,1520508698.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:38.537Z,1520508698.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:38.926Z,1520508698.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:39.336Z,1520508699.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:39.722Z,1520508699.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:40.129Z,1520508700.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:40.530Z,1520508700.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:40.936Z,1520508700.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:41.339Z,1520508701.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:41.736Z,1520508701.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:44.821Z,1520508704.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:44.948Z,1520508704.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:44.990Z,1520508704.990 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T11:31:45.315Z,1520508705.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:45.720Z,1520508705.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:46.116Z,1520508706.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:46.518Z,1520508706.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:46.922Z,1520508706.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:47.299Z,1520508707.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:47.724Z,1520508707.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:48.121Z,1520508708.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:48.525Z,1520508708.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:48.895Z,1520508708.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:49.298Z,1520508709.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:49.699Z,1520508709.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:50.106Z,1520508710.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:50.500Z,1520508710.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:50.901Z,1520508710.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:51.312Z,1520508711.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:51.707Z,1520508711.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:52.099Z,1520508712.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:52.500Z,1520508712.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:52.900Z,1520508712.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:53.302Z,1520508713.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:53.707Z,1520508713.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:54.109Z,1520508714.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:54.508Z,1520508714.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:54.906Z,1520508714.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:55.303Z,1520508715.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:55.698Z,1520508715.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:56.106Z,1520508716.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:56.502Z,1520508716.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:56.908Z,1520508716.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:57.311Z,1520508717.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:57.711Z,1520508717.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:58.097Z,1520508718.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:58.498Z,1520508718.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:58.906Z,1520508718.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:59.302Z,1520508719.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:31:59.711Z,1520508719.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:00.112Z,1520508720.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:00.511Z,1520508720.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:00.906Z,1520508720.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:01.302Z,1520508721.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:01.703Z,1520508721.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:02.098Z,1520508722.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:02.500Z,1520508722.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:02.904Z,1520508722.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:03.312Z,1520508723.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:03.715Z,1520508723.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:04.106Z,1520508724.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:04.510Z,1520508724.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:04.903Z,1520508724.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:05.306Z,1520508725.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:05.718Z,1520508725.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:06.116Z,1520508726.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:06.512Z,1520508726.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:06.903Z,1520508726.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:07.300Z,1520508727.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:07.703Z,1520508727.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:08.103Z,1520508728.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:08.500Z,1520508728.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:08.918Z,1520508728.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:09.316Z,1520508729.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:09.712Z,1520508729.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:10.143Z,1520508730.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:10.507Z,1520508730.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:10.911Z,1520508730.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:11.314Z,1520508731.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:11.716Z,1520508731.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:12.117Z,1520508732.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:12.512Z,1520508732.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:12.914Z,1520508732.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:13.293Z,1520508733.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:13.695Z,1520508733.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:14.095Z,1520508734.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:14.498Z,1520508734.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:14.897Z,1520508734.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:15.320Z,1520508735.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:15.722Z,1520508735.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:16.122Z,1520508736.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:16.519Z,1520508736.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:16.898Z,1520508736.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:17.321Z,1520508737.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:17.719Z,1520508737.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:18.123Z,1520508738.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:18.515Z,1520508738.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:18.894Z,1520508738.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:19.294Z,1520508739.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:19.691Z,1520508739.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:20.095Z,1520508740.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:20.497Z,1520508740.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:20.897Z,1520508740.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:21.327Z,1520508741.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:21.720Z,1520508741.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:22.090Z,1520508742.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:22.495Z,1520508742.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:22.898Z,1520508742.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:23.298Z,1520508743.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:23.723Z,1520508743.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:24.125Z,1520508744.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:24.523Z,1520508744.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:24.902Z,1520508744.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:25.299Z,1520508745.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:25.690Z,1520508745.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:26.098Z,1520508746.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:26.497Z,1520508746.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:26.901Z,1520508746.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:27.326Z,1520508747.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:27.726Z,1520508747.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:28.101Z,1520508748.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:28.506Z,1520508748.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:28.899Z,1520508748.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:29.300Z,1520508749.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:29.712Z,1520508749.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:30.108Z,1520508750.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:30.505Z,1520508750.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:30.902Z,1520508750.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:31.301Z,1520508751.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:31.697Z,1520508751.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:32.100Z,1520508752.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:32.498Z,1520508752.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:32.906Z,1520508752.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:33.308Z,1520508753.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:33.707Z,1520508753.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:34.096Z,1520508754.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:34.502Z,1520508754.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:34.904Z,1520508754.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:35.310Z,1520508755.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:35.708Z,1520508755.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:36.108Z,1520508756.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:36.511Z,1520508756.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:36.906Z,1520508756.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:37.301Z,1520508757.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:37.697Z,1520508757.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:38.099Z,1520508758.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:38.498Z,1520508758.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:38.907Z,1520508758.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:39.308Z,1520508759.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:39.708Z,1520508759.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:40.100Z,1520508760.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:40.502Z,1520508760.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:40.506Z,1520508760.506 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T11:27:40.2Z
2018-03-08T11:32:40.506Z,1520508760.506 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T11:32:40.506Z,1520508760.506 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T11:32:40.898Z,1520508760.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:41.393Z,1520508761.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:41.709Z,1520508761.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:44.815Z,1520508764.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:44.947Z,1520508764.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:45.273Z,1520508765.273 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20180308T074127/Courier0088.lzma
2018-03-08T11:32:45.344Z,1520508765.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:45.714Z,1520508765.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:46.068Z,1520508766.068 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0088.lzma.bak
2018-03-08T11:32:46.069Z,1520508766.069 [DataOverHttps](INFO): SBD MOMSN=7985281
2018-03-08T11:32:46.124Z,1520508766.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:46.698Z,1520508766.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:46.927Z,1520508766.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:50.021Z,1520508770.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:50.149Z,1520508770.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:50.528Z,1520508770.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:50.923Z,1520508770.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:51.323Z,1520508771.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:51.751Z,1520508771.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:52.152Z,1520508772.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:55.249Z,1520508775.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:55.354Z,1520508775.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:55.693Z,1520508775.693 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0089.lzma
2018-03-08T11:32:55.758Z,1520508775.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:56.135Z,1520508776.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:56.495Z,1520508776.495 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0089.lzma.bak
2018-03-08T11:32:56.495Z,1520508776.495 [DataOverHttps](INFO): SBD MOMSN=7985288
2018-03-08T11:32:56.575Z,1520508776.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:57.119Z,1520508777.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:57.122Z,1520508777.122 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T11:32:57.122Z,1520508777.122 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T11:32:57.122Z,1520508777.122 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T11:32:57.362Z,1520508777.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:32:57.739Z,1520508777.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:00.834Z,1520508780.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:00.978Z,1520508780.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:01.361Z,1520508781.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:01.761Z,1520508781.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:02.133Z,1520508782.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:02.547Z,1520508782.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:02.940Z,1520508782.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:03.339Z,1520508783.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:03.741Z,1520508783.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:04.173Z,1520508784.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:04.541Z,1520508784.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:04.940Z,1520508784.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:05.339Z,1520508785.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:05.737Z,1520508785.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:06.139Z,1520508786.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:06.552Z,1520508786.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:06.946Z,1520508786.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:07.369Z,1520508787.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:07.738Z,1520508787.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:08.139Z,1520508788.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:08.569Z,1520508788.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:08.973Z,1520508788.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:09.369Z,1520508789.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:09.739Z,1520508789.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:10.138Z,1520508790.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:10.498Z,1520508790.498 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T11:33:10.498Z,1520508790.498 [NAL9602] Data Fault, FailCount= 2
2018-03-08T11:33:10.498Z,1520508790.498 [NAL9602](ERROR): Data Fault
2018-03-08T11:33:10.559Z,1520508790.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:10.584Z,1520508790.584 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T11:33:10.902Z,1520508790.902 [NAL9602](INFO): Powering down
2018-03-08T11:33:10.949Z,1520508790.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:11.337Z,1520508791.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:11.743Z,1520508791.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:11.773Z,1520508791.773 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T11:33:11.773Z,1520508791.773 [NAL9602] No Fault, FailCount= 2
2018-03-08T11:33:12.150Z,1520508792.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:12.542Z,1520508792.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:12.935Z,1520508792.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:13.347Z,1520508793.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:13.740Z,1520508793.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:14.131Z,1520508794.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:14.546Z,1520508794.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:14.944Z,1520508794.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:15.343Z,1520508795.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:15.750Z,1520508795.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:16.153Z,1520508796.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:16.528Z,1520508796.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:16.929Z,1520508796.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:17.358Z,1520508797.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:17.730Z,1520508797.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:18.154Z,1520508798.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:18.539Z,1520508798.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:18.925Z,1520508798.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:19.332Z,1520508799.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:19.732Z,1520508799.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:20.129Z,1520508800.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:20.537Z,1520508800.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:20.954Z,1520508800.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:21.358Z,1520508801.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:21.734Z,1520508801.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:22.158Z,1520508802.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:22.555Z,1520508802.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:22.957Z,1520508802.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:23.359Z,1520508803.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:23.729Z,1520508803.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:24.129Z,1520508804.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:24.525Z,1520508804.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:24.935Z,1520508804.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:25.332Z,1520508805.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:25.729Z,1520508805.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:26.131Z,1520508806.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:26.537Z,1520508806.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:26.929Z,1520508806.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:27.330Z,1520508807.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:27.732Z,1520508807.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:28.134Z,1520508808.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:28.526Z,1520508808.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:28.937Z,1520508808.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:29.333Z,1520508809.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:29.726Z,1520508809.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:30.135Z,1520508810.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:30.537Z,1520508810.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:30.935Z,1520508810.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:31.337Z,1520508811.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:31.730Z,1520508811.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:32.126Z,1520508812.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:32.529Z,1520508812.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:32.930Z,1520508812.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:33.330Z,1520508813.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:33.733Z,1520508813.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:34.134Z,1520508814.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:34.530Z,1520508814.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:34.934Z,1520508814.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:35.334Z,1520508815.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:35.730Z,1520508815.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:36.134Z,1520508816.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:36.534Z,1520508816.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:36.930Z,1520508816.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:37.329Z,1520508817.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:37.739Z,1520508817.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:38.129Z,1520508818.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:38.537Z,1520508818.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:38.930Z,1520508818.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:39.330Z,1520508819.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:39.734Z,1520508819.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:40.139Z,1520508820.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:40.538Z,1520508820.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:40.943Z,1520508820.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:41.307Z,1520508821.307 [NAL9602](INFO): Powering up NAL9602
2018-03-08T11:33:41.339Z,1520508821.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:41.735Z,1520508821.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:42.138Z,1520508822.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:42.539Z,1520508822.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:42.934Z,1520508822.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:43.336Z,1520508823.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:43.739Z,1520508823.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:44.135Z,1520508824.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:44.536Z,1520508824.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:44.939Z,1520508824.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:45.339Z,1520508825.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:45.736Z,1520508825.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:46.143Z,1520508826.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:46.539Z,1520508826.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:46.938Z,1520508826.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:47.339Z,1520508827.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:47.738Z,1520508827.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:48.138Z,1520508828.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:48.539Z,1520508828.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:48.939Z,1520508828.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:49.336Z,1520508829.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:49.739Z,1520508829.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:50.139Z,1520508830.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:50.537Z,1520508830.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:50.947Z,1520508830.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:51.342Z,1520508831.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:51.738Z,1520508831.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:52.150Z,1520508832.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:52.502Z,1520508832.502 [NAL9602](INFO): NAL9602 initialized
2018-03-08T11:33:52.548Z,1520508832.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:52.943Z,1520508832.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:53.346Z,1520508833.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:53.749Z,1520508833.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:54.150Z,1520508834.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:54.544Z,1520508834.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:54.943Z,1520508834.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:55.350Z,1520508835.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:55.744Z,1520508835.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:56.149Z,1520508836.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:56.550Z,1520508836.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:56.949Z,1520508836.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:57.343Z,1520508837.343 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:57.343Z,1520508837.343 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77
2018-03-08T11:33:57.343Z,1520508837.343 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T11:33:57.345Z,1520508837.345 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:57.345Z,1520508837.345 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77
2018-03-08T11:33:57.346Z,1520508837.346 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T11:33:57.347Z,1520508837.347 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:33:57.347Z,1520508837.347 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 77
2018-03-08T11:33:57.347Z,1520508837.347 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T11:33:57.375Z,1520508837.375 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T11:33:57.375Z,1520508837.375 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T11:33:57.376Z,1520508837.376 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T11:33:57.757Z,1520508837.757 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T11:33:57.757Z,1520508837.757 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77
2018-03-08T11:33:57.757Z,1520508837.757 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T11:33:57.757Z,1520508837.757 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77
2018-03-08T11:33:57.758Z,1520508837.758 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T11:33:57.758Z,1520508837.758 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 77
2018-03-08T11:34:00.881Z,1520508840.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T11:34:00.881Z,1520508840.881 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:34:00.881Z,1520508840.881 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:34:00.882Z,1520508840.882 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T11:34:00.882Z,1520508840.882 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:34:00.882Z,1520508840.882 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:34:00.883Z,1520508840.883 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T11:34:00.883Z,1520508840.883 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:34:00.883Z,1520508840.883 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:34:01.006Z,1520508841.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-08T11:34:01.007Z,1520508841.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:01.366Z,1520508841.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T11:34:01.367Z,1520508841.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:01.754Z,1520508841.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T11:34:01.754Z,1520508841.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:02.163Z,1520508842.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T11:34:02.164Z,1520508842.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:02.554Z,1520508842.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T11:34:02.555Z,1520508842.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:02.954Z,1520508842.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T11:34:02.955Z,1520508842.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:03.364Z,1520508843.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T11:34:03.365Z,1520508843.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:03.763Z,1520508843.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T11:34:03.764Z,1520508843.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:04.164Z,1520508844.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T11:34:04.165Z,1520508844.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:04.549Z,1520508844.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T11:34:04.550Z,1520508844.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:04.958Z,1520508844.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T11:34:04.959Z,1520508844.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:05.355Z,1520508845.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T11:34:05.356Z,1520508845.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:05.758Z,1520508845.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T11:34:05.759Z,1520508845.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:06.163Z,1520508846.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T11:34:06.164Z,1520508846.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:06.563Z,1520508846.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T11:34:06.563Z,1520508846.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:06.966Z,1520508846.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T11:34:06.967Z,1520508846.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:07.354Z,1520508847.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T11:34:07.355Z,1520508847.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:07.751Z,1520508847.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T11:34:07.752Z,1520508847.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:08.163Z,1520508848.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T11:34:08.165Z,1520508848.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:08.566Z,1520508848.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T11:34:08.567Z,1520508848.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:08.964Z,1520508848.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T11:34:08.965Z,1520508848.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:09.349Z,1520508849.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T11:34:09.350Z,1520508849.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:09.758Z,1520508849.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T11:34:09.759Z,1520508849.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:10.165Z,1520508850.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T11:34:10.166Z,1520508850.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:10.568Z,1520508850.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T11:34:10.569Z,1520508850.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:10.961Z,1520508850.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T11:34:10.962Z,1520508850.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:11.354Z,1520508851.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T11:34:11.355Z,1520508851.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:11.762Z,1520508851.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T11:34:11.763Z,1520508851.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:12.161Z,1520508852.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T11:34:12.162Z,1520508852.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:12.572Z,1520508852.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T11:34:12.573Z,1520508852.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:12.965Z,1520508852.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T11:34:12.966Z,1520508852.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:13.355Z,1520508853.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T11:34:13.356Z,1520508853.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:13.754Z,1520508853.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T11:34:13.755Z,1520508853.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:14.165Z,1520508854.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T11:34:14.166Z,1520508854.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:14.566Z,1520508854.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T11:34:14.567Z,1520508854.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:14.966Z,1520508854.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T11:34:14.967Z,1520508854.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:15.358Z,1520508855.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T11:34:15.359Z,1520508855.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:15.752Z,1520508855.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T11:34:15.753Z,1520508855.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:16.160Z,1520508856.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T11:34:16.161Z,1520508856.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:16.565Z,1520508856.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T11:34:16.566Z,1520508856.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:16.966Z,1520508856.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T11:34:16.967Z,1520508856.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:17.355Z,1520508857.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:17.755Z,1520508857.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:18.162Z,1520508858.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:18.566Z,1520508858.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:18.965Z,1520508858.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:19.353Z,1520508859.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:19.753Z,1520508859.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:20.165Z,1520508860.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:20.565Z,1520508860.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:20.965Z,1520508860.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:21.357Z,1520508861.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:21.758Z,1520508861.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:22.165Z,1520508862.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:22.569Z,1520508862.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:22.961Z,1520508862.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:23.355Z,1520508863.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:23.755Z,1520508863.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:24.163Z,1520508864.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:24.574Z,1520508864.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:24.961Z,1520508864.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:25.359Z,1520508865.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:25.762Z,1520508865.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:26.167Z,1520508866.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:26.569Z,1520508866.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:26.966Z,1520508866.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:27.361Z,1520508867.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:27.761Z,1520508867.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:28.173Z,1520508868.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:28.569Z,1520508868.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:28.967Z,1520508868.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:29.362Z,1520508869.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:29.761Z,1520508869.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:30.167Z,1520508870.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:30.566Z,1520508870.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:30.969Z,1520508870.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:31.347Z,1520508871.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:31.746Z,1520508871.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:32.149Z,1520508872.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:32.578Z,1520508872.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:32.971Z,1520508872.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:33.350Z,1520508873.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:33.751Z,1520508873.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:34.174Z,1520508874.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:34.554Z,1520508874.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:34.978Z,1520508874.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:35.350Z,1520508875.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:35.749Z,1520508875.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:36.151Z,1520508876.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:36.551Z,1520508876.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:36.948Z,1520508876.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:37.382Z,1520508877.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:37.764Z,1520508877.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:38.158Z,1520508878.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:38.553Z,1520508878.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:38.951Z,1520508878.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:39.352Z,1520508879.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:39.751Z,1520508879.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:40.158Z,1520508880.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:40.558Z,1520508880.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:40.981Z,1520508880.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:41.351Z,1520508881.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:41.754Z,1520508881.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:42.181Z,1520508882.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:42.556Z,1520508882.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:42.953Z,1520508882.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:43.355Z,1520508883.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:43.750Z,1520508883.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:44.167Z,1520508884.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:44.559Z,1520508884.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:44.957Z,1520508884.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:45.356Z,1520508885.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:45.754Z,1520508885.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:46.160Z,1520508886.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:46.561Z,1520508886.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:46.967Z,1520508886.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:47.355Z,1520508887.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:47.748Z,1520508887.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:48.167Z,1520508888.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:48.560Z,1520508888.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:48.960Z,1520508888.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:49.351Z,1520508889.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:49.746Z,1520508889.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:50.161Z,1520508890.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:50.567Z,1520508890.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:50.966Z,1520508890.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:51.349Z,1520508891.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:51.761Z,1520508891.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:52.160Z,1520508892.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:52.561Z,1520508892.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:52.967Z,1520508892.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:53.354Z,1520508893.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:53.749Z,1520508893.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:54.159Z,1520508894.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:54.566Z,1520508894.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:54.957Z,1520508894.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:55.355Z,1520508895.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:55.750Z,1520508895.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:56.167Z,1520508896.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:56.563Z,1520508896.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:56.965Z,1520508896.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:57.349Z,1520508897.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:34:57.753Z,1520508897.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:00.864Z,1520508900.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:01.003Z,1520508901.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:01.365Z,1520508901.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:01.755Z,1520508901.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:02.161Z,1520508902.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:02.563Z,1520508902.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:02.963Z,1520508902.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:03.368Z,1520508903.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:03.771Z,1520508903.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:04.169Z,1520508904.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:04.567Z,1520508904.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:04.962Z,1520508904.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:05.367Z,1520508905.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:05.759Z,1520508905.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:06.172Z,1520508906.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:06.572Z,1520508906.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:06.971Z,1520508906.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:07.379Z,1520508907.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:07.757Z,1520508907.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:08.157Z,1520508908.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:08.581Z,1520508908.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:08.960Z,1520508908.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:09.359Z,1520508909.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:09.759Z,1520508909.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:10.181Z,1520508910.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:10.557Z,1520508910.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:10.978Z,1520508910.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:11.362Z,1520508911.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:11.762Z,1520508911.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:12.160Z,1520508912.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:12.558Z,1520508912.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:12.956Z,1520508912.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:13.363Z,1520508913.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:13.793Z,1520508913.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:14.171Z,1520508914.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:14.563Z,1520508914.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:14.962Z,1520508914.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:15.362Z,1520508915.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:15.757Z,1520508915.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:16.164Z,1520508916.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:16.563Z,1520508916.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:16.965Z,1520508916.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:17.361Z,1520508917.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:17.755Z,1520508917.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:18.164Z,1520508918.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:18.564Z,1520508918.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:18.963Z,1520508918.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:19.359Z,1520508919.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:19.762Z,1520508919.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:20.163Z,1520508920.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:20.571Z,1520508920.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:20.965Z,1520508920.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:21.362Z,1520508921.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:21.762Z,1520508921.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:22.165Z,1520508922.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:22.569Z,1520508922.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:22.966Z,1520508922.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:23.361Z,1520508923.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:23.754Z,1520508923.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:24.171Z,1520508924.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:24.568Z,1520508924.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:24.965Z,1520508924.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:25.363Z,1520508925.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:25.759Z,1520508925.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:26.178Z,1520508926.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:26.572Z,1520508926.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:26.972Z,1520508926.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:27.362Z,1520508927.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:27.763Z,1520508927.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:28.162Z,1520508928.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:28.561Z,1520508928.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:28.961Z,1520508928.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:29.370Z,1520508929.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:29.769Z,1520508929.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:30.169Z,1520508930.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:30.561Z,1520508930.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:30.961Z,1520508930.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:31.362Z,1520508931.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:31.768Z,1520508931.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:32.170Z,1520508932.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:32.578Z,1520508932.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:32.978Z,1520508932.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:33.362Z,1520508933.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:33.759Z,1520508933.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:34.162Z,1520508934.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:34.564Z,1520508934.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:34.962Z,1520508934.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:35.382Z,1520508935.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:35.771Z,1520508935.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:36.179Z,1520508936.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:36.571Z,1520508936.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:36.948Z,1520508936.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:37.375Z,1520508937.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:37.750Z,1520508937.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:38.177Z,1520508938.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:38.580Z,1520508938.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:38.976Z,1520508938.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:39.359Z,1520508939.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:39.762Z,1520508939.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:40.162Z,1520508940.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:40.560Z,1520508940.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:40.973Z,1520508940.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:41.382Z,1520508941.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:41.773Z,1520508941.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:42.175Z,1520508942.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:42.573Z,1520508942.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:42.968Z,1520508942.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:43.355Z,1520508943.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:43.756Z,1520508943.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:44.178Z,1520508944.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:44.577Z,1520508944.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:44.986Z,1520508944.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:45.379Z,1520508945.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:45.759Z,1520508945.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:46.157Z,1520508946.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:46.560Z,1520508946.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:46.961Z,1520508946.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:47.388Z,1520508947.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:47.761Z,1520508947.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:48.168Z,1520508948.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:48.559Z,1520508948.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:48.958Z,1520508948.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:49.360Z,1520508949.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:49.761Z,1520508949.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:50.160Z,1520508950.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:50.572Z,1520508950.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:50.971Z,1520508950.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:51.363Z,1520508951.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:51.757Z,1520508951.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:52.172Z,1520508952.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:52.568Z,1520508952.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:52.975Z,1520508952.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:53.363Z,1520508953.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:53.757Z,1520508953.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:54.168Z,1520508954.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:54.568Z,1520508954.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:54.968Z,1520508954.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:55.362Z,1520508955.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:55.763Z,1520508955.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:56.166Z,1520508956.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:56.559Z,1520508956.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:56.963Z,1520508956.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:57.368Z,1520508957.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:35:57.768Z,1520508957.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:00.898Z,1520508960.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:01.027Z,1520508961.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:01.373Z,1520508961.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:01.771Z,1520508961.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:02.198Z,1520508962.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:02.598Z,1520508962.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:02.968Z,1520508962.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:03.369Z,1520508963.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:03.771Z,1520508963.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:04.180Z,1520508964.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:04.599Z,1520508964.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:04.973Z,1520508964.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:05.368Z,1520508965.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:05.766Z,1520508965.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:06.173Z,1520508966.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:06.569Z,1520508966.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:06.971Z,1520508966.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:07.390Z,1520508967.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:07.789Z,1520508967.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:08.190Z,1520508968.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:08.584Z,1520508968.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:08.974Z,1520508968.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:09.377Z,1520508969.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:09.778Z,1520508969.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:10.182Z,1520508970.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:10.589Z,1520508970.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:10.986Z,1520508970.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:11.373Z,1520508971.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:11.777Z,1520508971.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:12.186Z,1520508972.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:12.578Z,1520508972.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:12.980Z,1520508972.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:13.386Z,1520508973.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:13.785Z,1520508973.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:14.190Z,1520508974.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:14.577Z,1520508974.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:14.979Z,1520508974.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:15.377Z,1520508975.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:15.778Z,1520508975.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:16.189Z,1520508976.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:16.588Z,1520508976.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:16.991Z,1520508976.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:17.382Z,1520508977.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:17.782Z,1520508977.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:18.178Z,1520508978.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:18.589Z,1520508978.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:18.964Z,1520508978.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:19.386Z,1520508979.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:19.789Z,1520508979.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:20.194Z,1520508980.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:20.587Z,1520508980.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:20.966Z,1520508980.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:21.393Z,1520508981.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:21.768Z,1520508981.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:22.190Z,1520508982.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:22.588Z,1520508982.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:22.988Z,1520508982.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:23.367Z,1520508983.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:23.766Z,1520508983.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:24.170Z,1520508984.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:24.567Z,1520508984.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:24.974Z,1520508984.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:25.380Z,1520508985.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:25.800Z,1520508985.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:26.201Z,1520508986.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:26.572Z,1520508986.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:26.972Z,1520508986.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:27.369Z,1520508987.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:27.772Z,1520508987.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:28.184Z,1520508988.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:28.573Z,1520508988.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:28.976Z,1520508988.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:29.373Z,1520508989.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:29.769Z,1520508989.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:30.172Z,1520508990.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:30.572Z,1520508990.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:30.972Z,1520508990.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:31.401Z,1520508991.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:31.777Z,1520508991.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:32.178Z,1520508992.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:32.573Z,1520508992.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:32.971Z,1520508992.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:33.369Z,1520508993.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:33.773Z,1520508993.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:34.180Z,1520508994.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:34.575Z,1520508994.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:34.979Z,1520508994.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:35.373Z,1520508995.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:35.769Z,1520508995.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:36.175Z,1520508996.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:36.575Z,1520508996.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:36.970Z,1520508996.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:37.380Z,1520508997.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:37.779Z,1520508997.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:38.176Z,1520508998.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:38.574Z,1520508998.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:38.970Z,1520508998.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:39.375Z,1520508999.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:39.774Z,1520508999.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:40.181Z,1520509000.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:40.581Z,1520509000.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:40.979Z,1520509000.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:41.375Z,1520509001.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:41.768Z,1520509001.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:42.171Z,1520509002.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:42.575Z,1520509002.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:42.968Z,1520509002.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:43.379Z,1520509003.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:43.779Z,1520509003.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:44.180Z,1520509004.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:44.574Z,1520509004.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:44.971Z,1520509004.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:45.376Z,1520509005.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:45.772Z,1520509005.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:46.177Z,1520509006.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:46.580Z,1520509006.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:46.980Z,1520509006.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:47.370Z,1520509007.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:47.771Z,1520509007.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:48.179Z,1520509008.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:48.573Z,1520509008.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:48.970Z,1520509008.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:49.379Z,1520509009.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:49.781Z,1520509009.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:50.181Z,1520509010.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:50.576Z,1520509010.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:50.974Z,1520509010.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:51.374Z,1520509011.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:51.772Z,1520509011.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:52.180Z,1520509012.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:52.587Z,1520509012.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:52.981Z,1520509012.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:53.375Z,1520509013.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:53.768Z,1520509013.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:54.171Z,1520509014.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:54.578Z,1520509014.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:54.967Z,1520509014.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:55.391Z,1520509015.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:55.783Z,1520509015.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:56.187Z,1520509016.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:56.572Z,1520509016.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:56.969Z,1520509016.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:57.377Z,1520509017.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:36:57.772Z,1520509017.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:00.882Z,1520509020.882 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:00.882Z,1520509020.882 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78
2018-03-08T11:37:00.882Z,1520509020.882 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T11:37:00.883Z,1520509020.883 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:00.884Z,1520509020.884 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78
2018-03-08T11:37:00.884Z,1520509020.884 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T11:37:00.886Z,1520509020.886 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:00.886Z,1520509020.886 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 78
2018-03-08T11:37:00.886Z,1520509020.886 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T11:37:00.940Z,1520509020.940 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T11:37:00.940Z,1520509020.940 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T11:37:00.940Z,1520509020.940 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T11:37:01.042Z,1520509021.042 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T11:37:01.042Z,1520509021.042 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78
2018-03-08T11:37:01.043Z,1520509021.043 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T11:37:01.043Z,1520509021.043 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78
2018-03-08T11:37:01.043Z,1520509021.043 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T11:37:01.043Z,1520509021.043 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 78
2018-03-08T11:37:01.431Z,1520509021.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T11:37:01.432Z,1520509021.432 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:37:01.432Z,1520509021.432 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:37:01.432Z,1520509021.432 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T11:37:01.433Z,1520509021.433 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:37:01.433Z,1520509021.433 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:37:01.434Z,1520509021.434 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T11:37:01.434Z,1520509021.434 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:37:01.434Z,1520509021.434 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:37:01.821Z,1520509021.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-03-08T11:37:01.822Z,1520509021.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:02.202Z,1520509022.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-03-08T11:37:02.203Z,1520509022.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:02.606Z,1520509022.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-03-08T11:37:02.607Z,1520509022.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:03.005Z,1520509023.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-03-08T11:37:03.005Z,1520509023.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:03.430Z,1520509023.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-03-08T11:37:03.431Z,1520509023.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:03.831Z,1520509023.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-03-08T11:37:03.832Z,1520509023.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:04.234Z,1520509024.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2018-03-08T11:37:04.235Z,1520509024.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:04.605Z,1520509024.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-08T11:37:04.606Z,1520509024.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:05.011Z,1520509025.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-03-08T11:37:05.012Z,1520509025.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:05.411Z,1520509025.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-03-08T11:37:05.412Z,1520509025.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:05.811Z,1520509025.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-08T11:37:05.812Z,1520509025.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:06.223Z,1520509026.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-08T11:37:06.223Z,1520509026.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:06.622Z,1520509026.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T11:37:06.623Z,1520509026.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:07.011Z,1520509027.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T11:37:07.012Z,1520509027.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:07.412Z,1520509027.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-08T11:37:07.413Z,1520509027.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:07.809Z,1520509027.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-08T11:37:07.810Z,1520509027.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:08.213Z,1520509028.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-08T11:37:08.214Z,1520509028.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:08.607Z,1520509028.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-08T11:37:08.608Z,1520509028.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:09.014Z,1520509029.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-08T11:37:09.015Z,1520509029.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:09.419Z,1520509029.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-08T11:37:09.420Z,1520509029.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:09.826Z,1520509029.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-08T11:37:09.827Z,1520509029.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:10.226Z,1520509030.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-08T11:37:10.227Z,1520509030.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:10.611Z,1520509030.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-08T11:37:10.612Z,1520509030.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:11.009Z,1520509031.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T11:37:11.010Z,1520509031.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:11.409Z,1520509031.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-08T11:37:11.410Z,1520509031.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:11.807Z,1520509031.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T11:37:11.808Z,1520509031.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:12.223Z,1520509032.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T11:37:12.225Z,1520509032.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:12.620Z,1520509032.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T11:37:12.621Z,1520509032.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:13.020Z,1520509033.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T11:37:13.021Z,1520509033.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:13.407Z,1520509033.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T11:37:13.408Z,1520509033.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:13.809Z,1520509033.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-08T11:37:13.810Z,1520509033.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:14.210Z,1520509034.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-08T11:37:14.211Z,1520509034.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:14.612Z,1520509034.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-08T11:37:14.613Z,1520509034.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:15.017Z,1520509035.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-08T11:37:15.018Z,1520509035.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:15.422Z,1520509035.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-08T11:37:15.423Z,1520509035.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:15.828Z,1520509035.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T11:37:15.829Z,1520509035.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:16.226Z,1520509036.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-08T11:37:16.227Z,1520509036.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:16.637Z,1520509036.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-03-08T11:37:16.638Z,1520509036.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:17.023Z,1520509037.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T11:37:17.024Z,1520509037.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:17.413Z,1520509037.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T11:37:17.414Z,1520509037.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:17.813Z,1520509037.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T11:37:17.814Z,1520509037.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:18.226Z,1520509038.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-08T11:37:18.227Z,1520509038.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:18.625Z,1520509038.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T11:37:18.626Z,1520509038.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:19.017Z,1520509039.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-08T11:37:19.018Z,1520509039.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:19.422Z,1520509039.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-08T11:37:19.423Z,1520509039.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:19.797Z,1520509039.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T11:37:19.798Z,1520509039.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:20.271Z,1520509040.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-03-08T11:37:20.272Z,1520509040.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:20.602Z,1520509040.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T11:37:20.603Z,1520509040.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:21.005Z,1520509041.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:21.425Z,1520509041.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:21.829Z,1520509041.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:22.208Z,1520509042.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:22.600Z,1520509042.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:23.007Z,1520509043.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:23.413Z,1520509043.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:23.802Z,1520509043.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:24.234Z,1520509044.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:24.634Z,1520509044.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:25.005Z,1520509045.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:25.406Z,1520509045.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:25.806Z,1520509045.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:26.203Z,1520509046.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:26.608Z,1520509046.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:27.006Z,1520509047.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:27.435Z,1520509047.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:27.816Z,1520509047.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:28.220Z,1520509048.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:28.599Z,1520509048.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:29.007Z,1520509049.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:29.404Z,1520509049.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:29.805Z,1520509049.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:30.237Z,1520509050.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:30.709Z,1520509050.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:31.018Z,1520509051.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:31.411Z,1520509051.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:31.811Z,1520509051.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:32.203Z,1520509052.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:32.651Z,1520509052.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:33.014Z,1520509053.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:33.413Z,1520509053.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:33.842Z,1520509053.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:34.218Z,1520509054.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:34.600Z,1520509054.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:35.015Z,1520509055.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:35.421Z,1520509055.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:35.808Z,1520509055.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:36.222Z,1520509056.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:36.626Z,1520509056.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:37.019Z,1520509057.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:37.409Z,1520509057.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:37.809Z,1520509057.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:38.205Z,1520509058.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:38.608Z,1520509058.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:39.008Z,1520509059.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:39.413Z,1520509059.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:39.819Z,1520509059.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:40.223Z,1520509060.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:40.605Z,1520509060.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:41.019Z,1520509061.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:41.411Z,1520509061.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:41.811Z,1520509061.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:42.220Z,1520509062.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:42.624Z,1520509062.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:43.021Z,1520509063.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:43.413Z,1520509063.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:43.815Z,1520509063.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:44.215Z,1520509064.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:44.608Z,1520509064.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:45.015Z,1520509065.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:45.420Z,1520509065.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:45.821Z,1520509065.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:46.218Z,1520509066.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:46.612Z,1520509066.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:47.011Z,1520509067.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:47.419Z,1520509067.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:47.815Z,1520509067.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:48.226Z,1520509068.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:48.631Z,1520509068.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:49.020Z,1520509069.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:49.412Z,1520509069.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:49.823Z,1520509069.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:50.210Z,1520509070.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:50.617Z,1520509070.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:51.015Z,1520509071.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:51.424Z,1520509071.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:51.825Z,1520509071.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:52.226Z,1520509072.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:52.618Z,1520509072.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:53.014Z,1520509073.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:53.411Z,1520509073.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:53.813Z,1520509073.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:54.220Z,1520509074.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:54.617Z,1520509074.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:55.021Z,1520509075.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:55.407Z,1520509075.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:55.808Z,1520509075.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:56.207Z,1520509076.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:56.614Z,1520509076.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:57.011Z,1520509077.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:57.427Z,1520509077.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:57.434Z,1520509077.434 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T11:37:57.434Z,1520509077.434 [Default:CheckIn:C.Wait] Stopped
2018-03-08T11:37:57.434Z,1520509077.434 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T11:37:57.434Z,1520509077.434 [Default:CheckIn:D] Running Loop=1
2018-03-08T11:37:57.824Z,1520509077.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:37:57.827Z,1520509077.827 [Default:CheckIn:D] Stopped
2018-03-08T11:37:57.827Z,1520509077.827 [Default:CheckIn:E] Running Loop=1
2018-03-08T11:38:00.930Z,1520509080.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:00.933Z,1520509080.933 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 232.217025 min 
2018-03-08T11:38:00.934Z,1520509080.934 [Default:CheckIn:E] Stopped
2018-03-08T11:38:00.934Z,1520509080.934 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T11:38:00.934Z,1520509080.934 [Default:CheckIn] Stopped
2018-03-08T11:38:00.934Z,1520509080.934 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T11:38:00.934Z,1520509080.934 [Default:CheckIn](INFO): Running loop #23
2018-03-08T11:38:00.934Z,1520509080.934 [Default:CheckIn] Running Loop=23
2018-03-08T11:38:00.934Z,1520509080.934 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T11:38:00.934Z,1520509080.934 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T11:38:01.074Z,1520509081.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:01.418Z,1520509081.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:01.801Z,1520509081.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:02.223Z,1520509082.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:02.630Z,1520509082.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:03.022Z,1520509083.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:03.398Z,1520509083.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:03.825Z,1520509083.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:04.202Z,1520509084.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:04.595Z,1520509084.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:05.002Z,1520509085.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:05.429Z,1520509085.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:05.826Z,1520509085.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:06.226Z,1520509086.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:06.597Z,1520509086.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:06.998Z,1520509086.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:07.402Z,1520509087.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:07.798Z,1520509087.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:08.226Z,1520509088.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:08.626Z,1520509088.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:09.006Z,1520509089.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:09.407Z,1520509089.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:09.802Z,1520509089.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:10.206Z,1520509090.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:10.605Z,1520509090.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:11.004Z,1520509091.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:11.401Z,1520509091.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:11.829Z,1520509091.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:12.229Z,1520509092.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:12.603Z,1520509092.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:12.999Z,1520509092.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:13.407Z,1520509093.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:13.803Z,1520509093.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:14.230Z,1520509094.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:14.630Z,1520509094.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:15.006Z,1520509095.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:15.399Z,1520509095.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:15.802Z,1520509095.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:16.202Z,1520509096.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:16.605Z,1520509096.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:17.007Z,1520509097.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:17.431Z,1520509097.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:17.830Z,1520509097.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:18.230Z,1520509098.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:18.601Z,1520509098.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:19.002Z,1520509099.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:19.404Z,1520509099.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:19.802Z,1520509099.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:20.233Z,1520509100.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:20.618Z,1520509100.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:21.016Z,1520509101.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:21.407Z,1520509101.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:21.803Z,1520509101.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:22.216Z,1520509102.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:22.607Z,1520509102.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:23.007Z,1520509103.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:23.414Z,1520509103.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:23.815Z,1520509103.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:24.216Z,1520509104.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:24.606Z,1520509104.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:25.007Z,1520509105.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:25.403Z,1520509105.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:25.808Z,1520509105.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:26.216Z,1520509106.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:26.622Z,1520509106.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:27.017Z,1520509107.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:27.404Z,1520509107.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:27.803Z,1520509107.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:28.214Z,1520509108.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:28.607Z,1520509108.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:29.004Z,1520509109.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:29.417Z,1520509109.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:29.812Z,1520509109.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:30.222Z,1520509110.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:30.609Z,1520509110.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:31.005Z,1520509111.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:31.405Z,1520509111.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:31.818Z,1520509111.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:32.214Z,1520509112.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:32.619Z,1520509112.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:33.017Z,1520509113.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:33.407Z,1520509113.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:33.810Z,1520509113.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:34.204Z,1520509114.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:34.606Z,1520509114.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:35.011Z,1520509115.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:35.411Z,1520509115.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:35.818Z,1520509115.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:36.215Z,1520509116.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:36.604Z,1520509116.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:37.005Z,1520509117.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:37.409Z,1520509117.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:37.801Z,1520509117.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:38.218Z,1520509118.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:38.622Z,1520509118.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:39.016Z,1520509119.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:39.407Z,1520509119.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:39.809Z,1520509119.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:40.200Z,1520509120.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:40.608Z,1520509120.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:41.009Z,1520509121.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:41.412Z,1520509121.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:41.818Z,1520509121.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:42.222Z,1520509122.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:42.607Z,1520509122.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:43.007Z,1520509123.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:43.408Z,1520509123.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:43.804Z,1520509123.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:44.214Z,1520509124.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:44.621Z,1520509124.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:45.016Z,1520509125.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:45.408Z,1520509125.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:45.803Z,1520509125.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:46.205Z,1520509126.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:46.609Z,1520509126.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:47.004Z,1520509127.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:47.417Z,1520509127.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:47.813Z,1520509127.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:48.218Z,1520509128.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:48.609Z,1520509128.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:49.005Z,1520509129.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:49.415Z,1520509129.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:49.805Z,1520509129.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:50.223Z,1520509130.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:50.621Z,1520509130.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:51.014Z,1520509131.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:51.415Z,1520509131.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:51.813Z,1520509131.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:52.212Z,1520509132.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:52.594Z,1520509132.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:52.998Z,1520509132.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:53.423Z,1520509133.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:53.800Z,1520509133.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:54.220Z,1520509134.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:54.601Z,1520509134.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:54.995Z,1520509134.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:55.402Z,1520509135.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:55.802Z,1520509135.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:56.206Z,1520509136.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:56.623Z,1520509136.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:57.024Z,1520509137.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:57.398Z,1520509137.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:57.803Z,1520509137.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:38:58.203Z,1520509138.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:01.326Z,1520509141.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:01.454Z,1520509141.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:01.826Z,1520509141.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:02.226Z,1520509142.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:02.626Z,1520509142.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:03.003Z,1520509143.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:03.400Z,1520509143.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:03.800Z,1520509143.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:04.226Z,1520509144.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:04.603Z,1520509144.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:05.001Z,1520509145.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:05.399Z,1520509145.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:05.800Z,1520509145.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:06.201Z,1520509146.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:06.601Z,1520509146.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:07.000Z,1520509147.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:07.427Z,1520509147.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:07.827Z,1520509147.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:08.206Z,1520509148.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:08.594Z,1520509148.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:08.999Z,1520509148.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:09.400Z,1520509149.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:09.842Z,1520509149.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:10.201Z,1520509150.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:10.626Z,1520509150.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:11.002Z,1520509151.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:11.399Z,1520509151.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:11.798Z,1520509151.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:12.203Z,1520509152.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:12.599Z,1520509152.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:12.998Z,1520509152.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:13.426Z,1520509153.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:13.804Z,1520509153.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:14.226Z,1520509154.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:14.598Z,1520509154.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:14.999Z,1520509154.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:15.400Z,1520509155.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:15.793Z,1520509155.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:16.201Z,1520509156.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:16.628Z,1520509156.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:16.999Z,1520509156.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:17.399Z,1520509157.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:17.798Z,1520509157.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:18.196Z,1520509158.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:18.606Z,1520509158.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:18.998Z,1520509158.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:19.427Z,1520509159.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:19.804Z,1520509159.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:20.201Z,1520509160.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:20.599Z,1520509160.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:20.000Z,1520509161.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:21.399Z,1520509161.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:21.793Z,1520509161.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:22.202Z,1520509162.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:22.627Z,1520509162.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:22.000Z,1520509163.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:23.399Z,1520509163.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:23.798Z,1520509163.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:24.193Z,1520509164.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:24.601Z,1520509164.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:24.000Z,1520509165.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:25.426Z,1520509165.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:25.805Z,1520509165.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:26.226Z,1520509166.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:26.594Z,1520509166.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:26.000Z,1520509167.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:27.399Z,1520509167.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:27.793Z,1520509167.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:28.201Z,1520509168.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:28.626Z,1520509168.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:29.006Z,1520509169.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:29.398Z,1520509169.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:29.796Z,1520509169.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:30.195Z,1520509170.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:30.625Z,1520509170.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:30.998Z,1520509170.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:31.426Z,1520509171.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:31.805Z,1520509171.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:32.226Z,1520509172.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:32.592Z,1520509172.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:32.999Z,1520509172.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:33.400Z,1520509173.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:33.792Z,1520509173.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:34.226Z,1520509174.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:34.606Z,1520509174.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:35.002Z,1520509175.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:35.399Z,1520509175.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:35.798Z,1520509175.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:36.193Z,1520509176.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:36.598Z,1520509176.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:36.993Z,1520509176.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:37.426Z,1520509177.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:37.826Z,1520509177.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:38.206Z,1520509178.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:38.597Z,1520509178.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:38.998Z,1520509178.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:39.399Z,1520509179.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:39.797Z,1520509179.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:40.201Z,1520509180.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:40.599Z,1520509180.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:41.000Z,1520509181.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:41.400Z,1520509181.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:41.799Z,1520509181.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:42.199Z,1520509182.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:42.600Z,1520509182.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:42.995Z,1520509182.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:43.433Z,1520509183.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:43.804Z,1520509183.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:44.233Z,1520509184.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:44.594Z,1520509184.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:44.998Z,1520509184.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:45.403Z,1520509185.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:45.800Z,1520509185.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:46.215Z,1520509186.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:46.613Z,1520509186.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:47.013Z,1520509187.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:47.403Z,1520509187.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:47.796Z,1520509187.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:48.203Z,1520509188.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:48.604Z,1520509188.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:49.005Z,1520509189.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:49.409Z,1520509189.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:49.812Z,1520509189.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:50.208Z,1520509190.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:50.636Z,1520509190.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:51.003Z,1520509191.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:51.406Z,1520509191.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:51.803Z,1520509191.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:52.215Z,1520509192.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:52.617Z,1520509192.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:53.005Z,1520509193.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:53.406Z,1520509193.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:53.801Z,1520509193.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:54.195Z,1520509194.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:54.603Z,1520509194.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:55.006Z,1520509195.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:55.414Z,1520509195.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:55.816Z,1520509195.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:56.211Z,1520509196.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:56.604Z,1520509196.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:57.005Z,1520509197.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:57.406Z,1520509197.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:57.783Z,1520509197.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:58.215Z,1520509198.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:39:58.614Z,1520509198.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:01.711Z,1520509201.711 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:01.711Z,1520509201.711 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79
2018-03-08T11:40:01.711Z,1520509201.711 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T11:40:01.713Z,1520509201.713 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:01.713Z,1520509201.713 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79
2018-03-08T11:40:01.713Z,1520509201.713 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T11:40:01.715Z,1520509201.715 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:01.715Z,1520509201.715 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 79
2018-03-08T11:40:01.715Z,1520509201.715 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T11:40:01.727Z,1520509201.727 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T11:40:01.727Z,1520509201.727 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T11:40:01.727Z,1520509201.727 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T11:40:01.889Z,1520509201.889 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T11:40:01.889Z,1520509201.889 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79
2018-03-08T11:40:01.890Z,1520509201.890 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T11:40:01.890Z,1520509201.890 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79
2018-03-08T11:40:01.890Z,1520509201.890 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T11:40:01.891Z,1520509201.891 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 79
2018-03-08T11:40:02.187Z,1520509202.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T11:40:02.188Z,1520509202.188 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:40:02.188Z,1520509202.188 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:40:02.188Z,1520509202.188 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T11:40:02.189Z,1520509202.189 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:40:02.189Z,1520509202.189 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:40:02.190Z,1520509202.190 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T11:40:02.190Z,1520509202.190 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:40:02.190Z,1520509202.190 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:40:02.590Z,1520509202.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-03-08T11:40:02.591Z,1520509202.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:02.987Z,1520509202.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-03-08T11:40:02.988Z,1520509202.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:03.418Z,1520509203.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-03-08T11:40:03.419Z,1520509203.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:03.792Z,1520509203.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-03-08T11:40:03.793Z,1520509203.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:04.192Z,1520509204.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-03-08T11:40:04.193Z,1520509204.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:04.594Z,1520509204.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-03-08T11:40:04.595Z,1520509204.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:04.990Z,1520509204.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-03-08T11:40:04.990Z,1520509204.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:05.394Z,1520509205.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-08T11:40:05.395Z,1520509205.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:05.789Z,1520509205.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-03-08T11:40:05.790Z,1520509205.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:06.233Z,1520509206.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-03-08T11:40:06.234Z,1520509206.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:06.591Z,1520509206.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-08T11:40:06.592Z,1520509206.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:06.992Z,1520509206.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-08T11:40:06.993Z,1520509206.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:07.389Z,1520509207.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T11:40:07.390Z,1520509207.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:07.784Z,1520509207.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T11:40:07.785Z,1520509207.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:08.194Z,1520509208.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-08T11:40:08.195Z,1520509208.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:08.589Z,1520509208.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-08T11:40:08.590Z,1520509208.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:08.982Z,1520509208.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-08T11:40:08.983Z,1520509208.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:09.392Z,1520509209.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-08T11:40:09.393Z,1520509209.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:09.795Z,1520509209.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-08T11:40:09.796Z,1520509209.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:10.195Z,1520509210.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-08T11:40:10.196Z,1520509210.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:10.597Z,1520509210.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-08T11:40:10.598Z,1520509210.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:10.986Z,1520509210.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-08T11:40:10.987Z,1520509210.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:11.390Z,1520509211.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-08T11:40:11.391Z,1520509211.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:11.790Z,1520509211.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T11:40:11.791Z,1520509211.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:12.197Z,1520509212.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-08T11:40:12.198Z,1520509212.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:12.599Z,1520509212.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T11:40:12.599Z,1520509212.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:12.000Z,1520509213.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T11:40:13.001Z,1520509213.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:13.394Z,1520509213.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T11:40:13.395Z,1520509213.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:13.783Z,1520509213.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T11:40:13.784Z,1520509213.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:14.197Z,1520509214.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T11:40:14.198Z,1520509214.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:14.590Z,1520509214.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-08T11:40:14.591Z,1520509214.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:14.985Z,1520509214.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-08T11:40:14.986Z,1520509214.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:15.399Z,1520509215.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-08T11:40:15.399Z,1520509215.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:15.799Z,1520509215.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-08T11:40:15.800Z,1520509215.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:16.195Z,1520509216.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-08T11:40:16.196Z,1520509216.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:16.589Z,1520509216.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T11:40:16.590Z,1520509216.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:16.985Z,1520509216.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-08T11:40:16.986Z,1520509216.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:17.388Z,1520509217.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T11:40:17.389Z,1520509217.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:17.794Z,1520509217.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T11:40:17.795Z,1520509217.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:18.206Z,1520509218.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T11:40:18.207Z,1520509218.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:18.600Z,1520509218.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T11:40:18.601Z,1520509218.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:19.006Z,1520509219.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-08T11:40:19.007Z,1520509219.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:19.389Z,1520509219.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T11:40:19.390Z,1520509219.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:19.788Z,1520509219.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-08T11:40:19.790Z,1520509219.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:20.191Z,1520509220.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-08T11:40:20.192Z,1520509220.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:20.588Z,1520509220.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T11:40:20.589Z,1520509220.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:20.987Z,1520509220.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T11:40:20.988Z,1520509220.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:21.399Z,1520509221.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T11:40:21.400Z,1520509221.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:21.799Z,1520509221.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:22.202Z,1520509222.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:22.591Z,1520509222.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:22.986Z,1520509222.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:23.392Z,1520509223.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:23.794Z,1520509223.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:24.198Z,1520509224.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:24.601Z,1520509224.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:24.999Z,1520509224.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:25.387Z,1520509225.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:25.787Z,1520509225.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:26.191Z,1520509226.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:26.589Z,1520509226.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:26.983Z,1520509226.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:27.406Z,1520509227.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:27.805Z,1520509227.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:28.198Z,1520509228.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:28.599Z,1520509228.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:28.988Z,1520509228.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:29.393Z,1520509229.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:29.794Z,1520509229.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:30.205Z,1520509230.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:30.604Z,1520509230.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:30.000Z,1520509231.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:31.388Z,1520509231.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:31.787Z,1520509231.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:32.192Z,1520509232.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:32.594Z,1520509232.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:32.998Z,1520509232.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:33.404Z,1520509233.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:33.800Z,1520509233.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:34.202Z,1520509234.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:34.602Z,1520509234.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:34.993Z,1520509234.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:35.392Z,1520509235.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:35.802Z,1520509235.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:36.199Z,1520509236.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:36.604Z,1520509236.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:37.005Z,1520509237.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:37.402Z,1520509237.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:37.783Z,1520509237.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:38.195Z,1520509238.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:38.605Z,1520509238.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:38.972Z,1520509238.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:39.405Z,1520509239.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:39.804Z,1520509239.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:40.200Z,1520509240.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:40.603Z,1520509240.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:41.012Z,1520509241.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:41.380Z,1520509241.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:41.798Z,1520509241.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:42.202Z,1520509242.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:42.601Z,1520509242.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:43.004Z,1520509243.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:43.398Z,1520509243.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:43.789Z,1520509243.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:44.198Z,1520509244.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:44.595Z,1520509244.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:44.991Z,1520509244.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:45.405Z,1520509245.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:45.814Z,1520509245.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:46.202Z,1520509246.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:46.592Z,1520509246.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:46.997Z,1520509246.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:47.394Z,1520509247.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:47.797Z,1520509247.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:48.205Z,1520509248.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:48.603Z,1520509248.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:49.004Z,1520509249.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:49.399Z,1520509249.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:49.797Z,1520509249.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:50.195Z,1520509250.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:50.599Z,1520509250.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:50.997Z,1520509250.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:51.405Z,1520509251.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:51.810Z,1520509251.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:52.203Z,1520509252.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:52.598Z,1520509252.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:52.997Z,1520509252.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:53.395Z,1520509253.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:53.801Z,1520509253.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:54.204Z,1520509254.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:54.607Z,1520509254.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:55.005Z,1520509255.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:55.403Z,1520509255.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:55.798Z,1520509255.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:56.183Z,1520509256.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:56.584Z,1520509256.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:57.011Z,1520509257.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:57.396Z,1520509257.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:57.800Z,1520509257.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:58.194Z,1520509258.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:58.589Z,1520509258.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:40:58.991Z,1520509258.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:02.085Z,1520509262.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:02.220Z,1520509262.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:02.572Z,1520509262.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:02.976Z,1520509262.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:03.368Z,1520509263.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:03.752Z,1520509263.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:04.153Z,1520509264.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:04.548Z,1520509264.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:04.953Z,1520509264.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:05.381Z,1520509265.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:05.753Z,1520509265.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:06.179Z,1520509266.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:06.551Z,1520509266.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:06.947Z,1520509266.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:07.378Z,1520509267.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:07.751Z,1520509267.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:08.157Z,1520509268.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:08.581Z,1520509268.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:08.964Z,1520509268.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:09.353Z,1520509269.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:09.751Z,1520509269.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:10.185Z,1520509270.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:10.581Z,1520509270.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:10.981Z,1520509270.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:11.352Z,1520509271.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:11.750Z,1520509271.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:12.181Z,1520509272.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:12.586Z,1520509272.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:12.953Z,1520509272.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:13.352Z,1520509273.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:13.754Z,1520509273.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:14.153Z,1520509274.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:14.582Z,1520509274.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:14.982Z,1520509274.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:15.354Z,1520509275.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:15.752Z,1520509275.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:16.183Z,1520509276.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:16.581Z,1520509276.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:16.983Z,1520509276.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:17.353Z,1520509277.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:17.751Z,1520509277.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:18.152Z,1520509278.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:18.554Z,1520509278.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:18.954Z,1520509278.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:19.382Z,1520509279.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:19.783Z,1520509279.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:20.153Z,1520509280.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:20.551Z,1520509280.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:20.952Z,1520509280.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:21.352Z,1520509281.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:21.751Z,1520509281.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:22.189Z,1520509282.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:22.557Z,1520509282.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:22.981Z,1520509282.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:23.355Z,1520509283.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:23.751Z,1520509283.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:24.182Z,1520509284.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:24.583Z,1520509284.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:24.981Z,1520509284.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:25.352Z,1520509285.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:25.752Z,1520509285.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:26.153Z,1520509286.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:26.581Z,1520509286.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:26.983Z,1520509286.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:27.352Z,1520509287.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:27.753Z,1520509287.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:28.183Z,1520509288.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:28.581Z,1520509288.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:28.978Z,1520509288.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:29.362Z,1520509289.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:29.755Z,1520509289.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:30.186Z,1520509290.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:30.568Z,1520509290.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:30.970Z,1520509290.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:31.366Z,1520509291.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:31.762Z,1520509291.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:32.170Z,1520509292.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:32.564Z,1520509292.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:32.965Z,1520509292.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:33.360Z,1520509293.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:33.759Z,1520509293.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:34.164Z,1520509294.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:34.566Z,1520509294.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:34.963Z,1520509294.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:35.360Z,1520509295.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:35.759Z,1520509295.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:36.168Z,1520509296.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:36.566Z,1520509296.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:36.962Z,1520509296.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:37.362Z,1520509297.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:37.760Z,1520509297.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:38.169Z,1520509298.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:38.571Z,1520509298.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:38.970Z,1520509298.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:39.361Z,1520509299.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:39.762Z,1520509299.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:40.170Z,1520509300.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:40.575Z,1520509300.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:40.966Z,1520509300.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:41.362Z,1520509301.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:41.760Z,1520509301.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:42.183Z,1520509302.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:42.573Z,1520509302.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:42.969Z,1520509302.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:43.360Z,1520509303.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:43.765Z,1520509303.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:44.175Z,1520509304.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:44.578Z,1520509304.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:44.969Z,1520509304.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:45.365Z,1520509305.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:45.379Z,1520509305.379 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T11:41:45.765Z,1520509305.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:46.174Z,1520509306.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:46.187Z,1520509306.187 [CBIT](INFO): Clearing failed state for component DropWeight
2018-03-08T11:41:46.187Z,1520509306.187 [DropWeight] No Fault, FailCount= 1
2018-03-08T11:41:46.573Z,1520509306.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:46.973Z,1520509306.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:47.366Z,1520509307.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:47.765Z,1520509307.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:48.172Z,1520509308.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:48.570Z,1520509308.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:48.971Z,1520509308.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:49.370Z,1520509309.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:49.767Z,1520509309.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:50.170Z,1520509310.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:50.571Z,1520509310.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:50.969Z,1520509310.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:51.365Z,1520509311.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:51.766Z,1520509311.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:52.172Z,1520509312.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:52.579Z,1520509312.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:52.979Z,1520509312.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:53.367Z,1520509313.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:53.767Z,1520509313.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:54.174Z,1520509314.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:54.573Z,1520509314.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:54.975Z,1520509314.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:55.371Z,1520509315.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:55.752Z,1520509315.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:56.179Z,1520509316.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:56.571Z,1520509316.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:56.974Z,1520509316.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:57.355Z,1520509317.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:57.758Z,1520509317.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:58.182Z,1520509318.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:58.577Z,1520509318.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:58.982Z,1520509318.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:41:59.352Z,1520509319.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:02.484Z,1520509322.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:02.638Z,1520509322.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:02.983Z,1520509322.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:03.380Z,1520509323.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:03.782Z,1520509323.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:04.156Z,1520509324.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:04.559Z,1520509324.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:04.956Z,1520509324.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:05.368Z,1520509325.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:05.768Z,1520509325.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:06.161Z,1520509326.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:06.559Z,1520509326.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:06.959Z,1520509326.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:07.358Z,1520509327.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:07.760Z,1520509327.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:08.161Z,1520509328.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:08.565Z,1520509328.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:08.961Z,1520509328.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:09.362Z,1520509329.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:09.758Z,1520509329.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:10.162Z,1520509330.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:10.570Z,1520509330.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:10.962Z,1520509330.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:11.359Z,1520509331.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:11.759Z,1520509331.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:12.163Z,1520509332.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:12.566Z,1520509332.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:12.960Z,1520509332.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:13.359Z,1520509333.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:13.758Z,1520509333.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:14.166Z,1520509334.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:14.565Z,1520509334.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:14.960Z,1520509334.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:15.358Z,1520509335.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:15.763Z,1520509335.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:16.161Z,1520509336.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:16.560Z,1520509336.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:16.987Z,1520509336.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:17.391Z,1520509337.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:17.758Z,1520509337.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:18.161Z,1520509338.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:18.561Z,1520509338.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:18.961Z,1520509338.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:19.355Z,1520509339.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:19.756Z,1520509339.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:20.161Z,1520509340.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:20.565Z,1520509340.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:20.961Z,1520509340.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:21.359Z,1520509341.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:21.759Z,1520509341.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:22.160Z,1520509342.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:22.549Z,1520509342.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:22.564Z,1520509342.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:22.946Z,1520509342.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:22.962Z,1520509342.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:23.338Z,1520509343.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:23.358Z,1520509343.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:23.735Z,1520509343.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:23.763Z,1520509343.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:24.146Z,1520509344.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:24.162Z,1520509344.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:24.546Z,1520509344.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:24.566Z,1520509344.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:24.946Z,1520509344.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:24.961Z,1520509344.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:25.343Z,1520509345.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:25.359Z,1520509345.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:25.740Z,1520509345.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:25.792Z,1520509345.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:26.145Z,1520509346.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:26.166Z,1520509346.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:26.551Z,1520509346.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:26.566Z,1520509346.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:26.961Z,1520509346.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:26.993Z,1520509346.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:27.336Z,1520509347.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:27.351Z,1520509347.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:27.739Z,1520509347.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:27.755Z,1520509347.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:28.138Z,1520509348.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:28.157Z,1520509348.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:28.595Z,1520509348.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:28.610Z,1520509348.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:28.944Z,1520509348.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:28.966Z,1520509348.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:29.346Z,1520509349.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:29.361Z,1520509349.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:29.745Z,1520509349.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:29.779Z,1520509349.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:30.150Z,1520509350.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:30.181Z,1520509350.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:30.539Z,1520509350.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:30.554Z,1520509350.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:30.941Z,1520509350.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:30.956Z,1520509350.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:31.339Z,1520509351.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:31.354Z,1520509351.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:31.741Z,1520509351.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:31.757Z,1520509351.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:32.153Z,1520509352.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:32.177Z,1520509352.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:32.550Z,1520509352.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:32.579Z,1520509352.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:32.946Z,1520509352.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:32.977Z,1520509352.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:33.338Z,1520509353.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:33.366Z,1520509353.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:33.739Z,1520509353.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:33.759Z,1520509353.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:34.145Z,1520509354.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:34.166Z,1520509354.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:34.550Z,1520509354.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:34.565Z,1520509354.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:34.946Z,1520509354.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:34.962Z,1520509354.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:35.343Z,1520509355.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:35.359Z,1520509355.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:35.743Z,1520509355.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:35.758Z,1520509355.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:36.147Z,1520509356.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:36.163Z,1520509356.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:36.550Z,1520509356.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:36.566Z,1520509356.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:36.946Z,1520509356.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:36.961Z,1520509356.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:37.343Z,1520509357.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:37.359Z,1520509357.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:37.743Z,1520509357.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:37.758Z,1520509357.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:38.145Z,1520509358.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:38.161Z,1520509358.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:38.546Z,1520509358.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:38.561Z,1520509358.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:38.945Z,1520509358.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:38.966Z,1520509358.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:39.343Z,1520509359.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:39.358Z,1520509359.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:39.741Z,1520509359.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:39.762Z,1520509359.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:40.146Z,1520509360.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:40.162Z,1520509360.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:40.549Z,1520509360.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:40.564Z,1520509360.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:40.947Z,1520509360.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:40.963Z,1520509360.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:41.343Z,1520509361.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:41.359Z,1520509361.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:41.743Z,1520509361.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:41.758Z,1520509361.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:42.146Z,1520509362.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:42.162Z,1520509362.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:42.550Z,1520509362.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:42.565Z,1520509362.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:42.961Z,1520509362.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:43.359Z,1520509363.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:43.757Z,1520509363.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:44.162Z,1520509364.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:44.566Z,1520509364.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:44.961Z,1520509364.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:45.359Z,1520509365.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:45.759Z,1520509365.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:46.166Z,1520509366.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:46.564Z,1520509366.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:46.966Z,1520509366.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:47.360Z,1520509367.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:47.758Z,1520509367.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:48.171Z,1520509368.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:48.570Z,1520509368.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:48.965Z,1520509368.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:49.361Z,1520509369.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:49.763Z,1520509369.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:50.165Z,1520509370.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:50.566Z,1520509370.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:50.970Z,1520509370.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:51.345Z,1520509371.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:51.361Z,1520509371.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:51.743Z,1520509371.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:51.759Z,1520509371.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:52.149Z,1520509372.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:52.164Z,1520509372.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:52.550Z,1520509372.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:52.565Z,1520509372.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:52.950Z,1520509372.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:52.965Z,1520509372.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:53.338Z,1520509373.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:53.359Z,1520509373.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:53.736Z,1520509373.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:53.751Z,1520509373.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:54.145Z,1520509374.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:54.161Z,1520509374.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:54.550Z,1520509374.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:54.571Z,1520509374.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:54.949Z,1520509374.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:54.964Z,1520509374.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:55.345Z,1520509375.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:55.361Z,1520509375.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:55.743Z,1520509375.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:55.762Z,1520509375.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:56.149Z,1520509376.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:56.164Z,1520509376.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:56.550Z,1520509376.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:56.571Z,1520509376.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:56.949Z,1520509376.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:56.964Z,1520509376.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:57.347Z,1520509377.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:57.362Z,1520509377.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:57.724Z,1520509377.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:57.763Z,1520509377.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:58.148Z,1520509378.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:58.164Z,1520509378.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:58.549Z,1520509378.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:58.564Z,1520509378.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:58.944Z,1520509378.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:58.968Z,1520509378.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:59.345Z,1520509379.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:59.361Z,1520509379.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:42:59.727Z,1520509379.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:42:59.760Z,1520509379.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:02.852Z,1520509382.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:02.868Z,1520509382.868 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:02.869Z,1520509382.869 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80
2018-03-08T11:43:02.869Z,1520509382.869 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T11:43:02.870Z,1520509382.870 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:02.870Z,1520509382.870 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80
2018-03-08T11:43:02.871Z,1520509382.871 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T11:43:02.872Z,1520509382.872 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:02.872Z,1520509382.872 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 80
2018-03-08T11:43:02.873Z,1520509382.873 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T11:43:02.875Z,1520509382.875 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T11:38:00.9Z
2018-03-08T11:43:02.875Z,1520509382.875 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T11:43:02.875Z,1520509382.875 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T11:43:02.905Z,1520509382.905 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T11:43:02.905Z,1520509382.905 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T11:43:02.905Z,1520509382.905 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T11:43:02.998Z,1520509382.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:03.061Z,1520509383.061 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T11:43:03.061Z,1520509383.061 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80
2018-03-08T11:43:03.061Z,1520509383.061 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T11:43:03.062Z,1520509383.062 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80
2018-03-08T11:43:03.062Z,1520509383.062 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T11:43:03.062Z,1520509383.062 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 80
2018-03-08T11:43:03.415Z,1520509383.415 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0092.lzma
2018-03-08T11:43:03.453Z,1520509383.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:03.483Z,1520509383.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T11:43:03.484Z,1520509383.484 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:43:03.484Z,1520509383.484 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:43:03.484Z,1520509383.484 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T11:43:03.485Z,1520509383.485 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:43:03.485Z,1520509383.485 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:43:03.485Z,1520509383.485 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T11:43:03.486Z,1520509383.486 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:43:03.486Z,1520509383.486 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:43:03.744Z,1520509383.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:03.760Z,1520509383.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-03-08T11:43:03.761Z,1520509383.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:04.120Z,1520509384.120 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0092.lzma.bak
2018-03-08T11:43:04.120Z,1520509384.120 [DataOverHttps](INFO): SBD MOMSN=7985344
2018-03-08T11:43:04.158Z,1520509384.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:04.187Z,1520509384.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-03-08T11:43:04.188Z,1520509384.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:04.711Z,1520509384.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:04.741Z,1520509384.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.9 s old, using for 20.0 s.
2018-03-08T11:43:04.742Z,1520509384.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:04.942Z,1520509384.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:04.961Z,1520509384.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-03-08T11:43:04.962Z,1520509384.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:08.079Z,1520509388.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:08.094Z,1520509388.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T11:43:08.095Z,1520509388.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:08.205Z,1520509388.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:08.243Z,1520509388.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2018-03-08T11:43:08.244Z,1520509388.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:08.561Z,1520509388.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:08.585Z,1520509388.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T11:43:08.586Z,1520509388.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:08.952Z,1520509388.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:08.966Z,1520509388.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T11:43:08.967Z,1520509388.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:09.349Z,1520509389.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:09.364Z,1520509389.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-08T11:43:09.365Z,1520509389.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:09.752Z,1520509389.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:09.767Z,1520509389.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-08T11:43:09.767Z,1520509389.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:10.161Z,1520509390.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:10.176Z,1520509390.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-08T11:43:10.190Z,1520509390.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:13.261Z,1520509393.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:13.277Z,1520509393.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T11:43:13.278Z,1520509393.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:13.381Z,1520509393.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:13.422Z,1520509393.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2018-03-08T11:43:13.423Z,1520509393.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:13.740Z,1520509393.740 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0093.lzma
2018-03-08T11:43:13.767Z,1520509393.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:13.782Z,1520509393.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T11:43:13.783Z,1520509393.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:14.160Z,1520509394.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:14.175Z,1520509394.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T11:43:14.176Z,1520509394.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:14.531Z,1520509394.531 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0093.lzma.bak
2018-03-08T11:43:14.531Z,1520509394.531 [DataOverHttps](INFO): SBD MOMSN=7985348
2018-03-08T11:43:14.574Z,1520509394.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:14.605Z,1520509394.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T11:43:14.606Z,1520509394.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:15.128Z,1520509395.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:15.162Z,1520509395.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2018-03-08T11:43:15.163Z,1520509395.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:15.166Z,1520509395.166 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T11:43:15.166Z,1520509395.166 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T11:43:15.166Z,1520509395.166 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T11:43:15.366Z,1520509395.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:15.386Z,1520509395.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T11:43:15.387Z,1520509395.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:18.499Z,1520509398.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:18.516Z,1520509398.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T11:43:18.517Z,1520509398.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:18.625Z,1520509398.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:18.666Z,1520509398.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-03-08T11:43:18.667Z,1520509398.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:18.971Z,1520509398.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:18.987Z,1520509398.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T11:43:18.988Z,1520509398.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:19.371Z,1520509399.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:19.386Z,1520509399.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T11:43:19.387Z,1520509399.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:19.773Z,1520509399.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:19.788Z,1520509399.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T11:43:19.789Z,1520509399.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:20.185Z,1520509400.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:20.217Z,1520509400.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-08T11:43:20.218Z,1520509400.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:20.581Z,1520509400.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:20.596Z,1520509400.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T11:43:20.597Z,1520509400.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:20.978Z,1520509400.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:20.993Z,1520509400.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-08T11:43:20.994Z,1520509400.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:21.376Z,1520509401.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:21.391Z,1520509401.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-08T11:43:21.392Z,1520509401.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:21.773Z,1520509401.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:21.788Z,1520509401.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T11:43:21.789Z,1520509401.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:22.173Z,1520509402.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:22.188Z,1520509402.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T11:43:22.189Z,1520509402.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:22.569Z,1520509402.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:22.589Z,1520509402.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T11:43:22.590Z,1520509402.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:22.973Z,1520509402.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:22.988Z,1520509402.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:23.377Z,1520509403.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:23.393Z,1520509403.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:23.781Z,1520509403.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:23.796Z,1520509403.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:24.178Z,1520509404.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:24.275Z,1520509404.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:24.573Z,1520509404.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:24.588Z,1520509404.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:24.973Z,1520509404.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:24.988Z,1520509404.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:25.376Z,1520509405.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:25.391Z,1520509405.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:25.773Z,1520509405.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:25.788Z,1520509405.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:26.177Z,1520509406.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:26.193Z,1520509406.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:26.579Z,1520509406.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:26.594Z,1520509406.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:26.977Z,1520509406.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:26.993Z,1520509406.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:27.375Z,1520509407.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:27.391Z,1520509407.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:27.776Z,1520509407.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:27.791Z,1520509407.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:28.173Z,1520509408.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:28.189Z,1520509408.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:28.576Z,1520509408.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:28.591Z,1520509408.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:28.973Z,1520509408.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:28.988Z,1520509408.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:29.389Z,1520509409.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:29.421Z,1520509409.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:29.781Z,1520509409.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:29.802Z,1520509409.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:30.184Z,1520509410.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:30.202Z,1520509410.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:30.577Z,1520509410.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:30.593Z,1520509410.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:30.976Z,1520509410.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:30.992Z,1520509410.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:31.375Z,1520509411.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:31.391Z,1520509411.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:31.769Z,1520509411.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:31.789Z,1520509411.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:32.181Z,1520509412.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:32.197Z,1520509412.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:32.581Z,1520509412.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:32.596Z,1520509412.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:32.978Z,1520509412.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:33.002Z,1520509413.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:33.375Z,1520509413.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:33.391Z,1520509413.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:33.776Z,1520509413.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:33.792Z,1520509413.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:34.169Z,1520509414.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:34.190Z,1520509414.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:34.575Z,1520509414.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:34.590Z,1520509414.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:34.973Z,1520509414.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:34.988Z,1520509414.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:35.385Z,1520509415.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:35.400Z,1520509415.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:35.785Z,1520509415.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:35.801Z,1520509415.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:36.186Z,1520509416.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:36.201Z,1520509416.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:36.575Z,1520509416.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:36.591Z,1520509416.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:36.973Z,1520509416.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:36.988Z,1520509416.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:37.373Z,1520509417.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:37.388Z,1520509417.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:37.769Z,1520509417.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:37.789Z,1520509417.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:38.185Z,1520509418.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:38.201Z,1520509418.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:38.585Z,1520509418.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:38.600Z,1520509418.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:38.974Z,1520509418.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:39.001Z,1520509419.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:39.364Z,1520509419.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:39.391Z,1520509419.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:39.763Z,1520509419.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:39.791Z,1520509419.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:40.161Z,1520509420.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:40.195Z,1520509420.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:40.566Z,1520509420.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:40.596Z,1520509420.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:40.963Z,1520509420.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:40.999Z,1520509420.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:41.386Z,1520509421.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:41.401Z,1520509421.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:41.805Z,1520509421.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:41.821Z,1520509421.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:42.190Z,1520509422.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:42.210Z,1520509422.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:42.563Z,1520509422.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:42.595Z,1520509422.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:42.964Z,1520509422.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:42.979Z,1520509422.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:43.370Z,1520509423.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:43.464Z,1520509423.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:43.760Z,1520509423.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:43.788Z,1520509423.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:44.185Z,1520509424.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:44.221Z,1520509424.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:44.577Z,1520509424.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:44.592Z,1520509424.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:44.977Z,1520509424.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:44.998Z,1520509424.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:45.372Z,1520509425.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:45.388Z,1520509425.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:45.773Z,1520509425.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:45.788Z,1520509425.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:46.167Z,1520509426.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:46.189Z,1520509426.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:46.571Z,1520509426.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:46.586Z,1520509426.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:46.976Z,1520509426.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:46.991Z,1520509426.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:47.377Z,1520509427.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:47.393Z,1520509427.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:47.782Z,1520509427.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:47.797Z,1520509427.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:48.177Z,1520509428.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:48.198Z,1520509428.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:48.573Z,1520509428.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:48.589Z,1520509428.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:48.976Z,1520509428.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:48.992Z,1520509428.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:49.373Z,1520509429.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:49.388Z,1520509429.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:49.765Z,1520509429.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:49.787Z,1520509429.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:50.178Z,1520509430.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:50.193Z,1520509430.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:50.580Z,1520509430.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:50.595Z,1520509430.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:50.976Z,1520509430.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:50.991Z,1520509430.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:51.375Z,1520509431.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:51.390Z,1520509431.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:51.773Z,1520509431.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:51.788Z,1520509431.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:52.167Z,1520509432.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:52.188Z,1520509432.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:52.576Z,1520509432.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:52.592Z,1520509432.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:52.973Z,1520509432.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:52.987Z,1520509432.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:53.350Z,1520509433.350 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T11:43:53.350Z,1520509433.350 [NAL9602] Data Fault, FailCount= 3
2018-03-08T11:43:53.350Z,1520509433.350 [NAL9602](ERROR): Data Fault
2018-03-08T11:43:53.386Z,1520509433.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:53.402Z,1520509433.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:53.435Z,1520509433.435 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T11:43:53.747Z,1520509433.747 [NAL9602](INFO): Powering down
2018-03-08T11:43:53.781Z,1520509433.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:53.796Z,1520509433.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:54.175Z,1520509434.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:54.190Z,1520509434.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:54.569Z,1520509434.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:54.593Z,1520509434.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:54.615Z,1520509434.615 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T11:43:54.615Z,1520509434.615 [NAL9602] No Fault, FailCount= 3
2018-03-08T11:43:54.976Z,1520509434.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:54.992Z,1520509434.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:55.372Z,1520509435.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:55.395Z,1520509435.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:55.756Z,1520509435.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:55.793Z,1520509435.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:56.174Z,1520509436.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:56.194Z,1520509436.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:56.573Z,1520509436.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:56.588Z,1520509436.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:56.960Z,1520509436.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:56.989Z,1520509436.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:57.380Z,1520509437.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:57.396Z,1520509437.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:57.771Z,1520509437.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:57.787Z,1520509437.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:58.160Z,1520509438.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:58.197Z,1520509438.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:58.573Z,1520509438.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:58.589Z,1520509438.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:58.971Z,1520509438.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:58.986Z,1520509438.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:59.371Z,1520509439.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:59.387Z,1520509439.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:43:59.779Z,1520509439.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:43:59.799Z,1520509439.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:00.176Z,1520509440.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:00.191Z,1520509440.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:00.575Z,1520509440.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:00.606Z,1520509440.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:00.973Z,1520509440.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:00.988Z,1520509440.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:01.371Z,1520509441.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:01.390Z,1520509441.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:01.756Z,1520509441.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:01.788Z,1520509441.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:02.173Z,1520509442.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:02.195Z,1520509442.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:02.563Z,1520509442.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:02.594Z,1520509442.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:02.960Z,1520509442.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:02.992Z,1520509442.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:03.366Z,1520509443.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:03.393Z,1520509443.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:03.763Z,1520509443.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:03.789Z,1520509443.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:04.160Z,1520509444.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:04.195Z,1520509444.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:04.583Z,1520509444.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:04.603Z,1520509444.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:04.967Z,1520509444.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:04.994Z,1520509444.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:05.366Z,1520509445.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:05.393Z,1520509445.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:05.766Z,1520509445.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:05.793Z,1520509445.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:06.163Z,1520509446.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:06.202Z,1520509446.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:06.562Z,1520509446.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:06.591Z,1520509446.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:06.966Z,1520509446.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:06.995Z,1520509446.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:07.363Z,1520509447.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:07.389Z,1520509447.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:07.761Z,1520509447.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:07.789Z,1520509447.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:08.166Z,1520509448.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:08.198Z,1520509448.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:08.563Z,1520509448.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:08.595Z,1520509448.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:08.961Z,1520509448.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:08.989Z,1520509448.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:09.362Z,1520509449.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:09.390Z,1520509449.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:09.767Z,1520509449.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:09.806Z,1520509449.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:10.156Z,1520509450.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:10.173Z,1520509450.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:10.571Z,1520509450.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:10.602Z,1520509450.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:10.963Z,1520509450.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:10.978Z,1520509450.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:11.364Z,1520509451.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:11.380Z,1520509451.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:11.770Z,1520509451.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:11.787Z,1520509451.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:12.170Z,1520509452.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:12.214Z,1520509452.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:12.568Z,1520509452.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:12.584Z,1520509452.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:12.971Z,1520509452.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:12.986Z,1520509452.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:13.367Z,1520509453.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:13.382Z,1520509453.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:13.768Z,1520509453.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:13.783Z,1520509453.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:14.167Z,1520509454.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:14.183Z,1520509454.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:14.572Z,1520509454.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:14.587Z,1520509454.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:14.967Z,1520509454.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:14.983Z,1520509454.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:15.368Z,1520509455.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:15.390Z,1520509455.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:15.771Z,1520509455.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:15.786Z,1520509455.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:18.868Z,1520509458.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:18.884Z,1520509458.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:18.984Z,1520509458.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:19.022Z,1520509459.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:19.352Z,1520509459.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:19.379Z,1520509459.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:19.741Z,1520509459.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:19.774Z,1520509459.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:20.151Z,1520509460.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:20.186Z,1520509460.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:20.551Z,1520509460.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:20.582Z,1520509460.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:20.946Z,1520509460.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:20.985Z,1520509460.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:21.351Z,1520509461.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:21.388Z,1520509461.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:21.747Z,1520509461.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:21.778Z,1520509461.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:22.151Z,1520509462.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:22.190Z,1520509462.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:22.544Z,1520509462.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:22.560Z,1520509462.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:22.951Z,1520509462.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:22.966Z,1520509462.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:23.351Z,1520509463.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:23.365Z,1520509463.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:23.747Z,1520509463.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:23.762Z,1520509463.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:24.135Z,1520509464.135 [NAL9602](INFO): Powering up NAL9602
2018-03-08T11:44:24.152Z,1520509464.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:24.167Z,1520509464.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:24.551Z,1520509464.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:24.565Z,1520509464.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:24.948Z,1520509464.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:24.963Z,1520509464.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:25.352Z,1520509465.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:25.367Z,1520509465.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:25.751Z,1520509465.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:25.766Z,1520509465.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:26.151Z,1520509466.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:26.167Z,1520509466.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:26.552Z,1520509466.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:26.567Z,1520509466.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:26.951Z,1520509466.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:26.966Z,1520509466.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:27.351Z,1520509467.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:27.366Z,1520509467.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:27.751Z,1520509467.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:27.766Z,1520509467.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:28.147Z,1520509468.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:28.163Z,1520509468.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:28.553Z,1520509468.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:28.568Z,1520509468.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:28.958Z,1520509468.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:28.973Z,1520509468.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:29.356Z,1520509469.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:29.371Z,1520509469.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:29.753Z,1520509469.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:29.768Z,1520509469.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:30.157Z,1520509470.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:30.172Z,1520509470.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:30.551Z,1520509470.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:30.565Z,1520509470.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:30.951Z,1520509470.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:30.967Z,1520509470.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:31.357Z,1520509471.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:31.372Z,1520509471.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:31.753Z,1520509471.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:31.768Z,1520509471.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:32.152Z,1520509472.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:32.168Z,1520509472.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:32.557Z,1520509472.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:32.573Z,1520509472.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:32.956Z,1520509472.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:32.971Z,1520509472.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:33.353Z,1520509473.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:33.368Z,1520509473.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:33.753Z,1520509473.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:33.784Z,1520509473.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:34.154Z,1520509474.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:34.169Z,1520509474.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:34.555Z,1520509474.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:34.572Z,1520509474.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:34.970Z,1520509474.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:35.001Z,1520509475.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:35.335Z,1520509475.335 [NAL9602](INFO): NAL9602 initialized
2018-03-08T11:44:35.363Z,1520509475.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:35.379Z,1520509475.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:35.759Z,1520509475.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:35.775Z,1520509475.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:36.161Z,1520509476.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:36.178Z,1520509476.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:36.565Z,1520509476.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:36.583Z,1520509476.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:36.965Z,1520509476.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:36.983Z,1520509476.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:37.360Z,1520509477.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:37.376Z,1520509477.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:37.759Z,1520509477.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:37.775Z,1520509477.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:38.156Z,1520509478.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:38.172Z,1520509478.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:38.561Z,1520509478.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:38.576Z,1520509478.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:38.965Z,1520509478.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:38.981Z,1520509478.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:39.365Z,1520509479.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:39.380Z,1520509479.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:39.761Z,1520509479.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:39.777Z,1520509479.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:40.152Z,1520509480.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:40.182Z,1520509480.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:40.560Z,1520509480.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:40.575Z,1520509480.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:40.962Z,1520509480.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:40.978Z,1520509480.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:41.361Z,1520509481.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:41.376Z,1520509481.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:41.765Z,1520509481.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:41.786Z,1520509481.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:42.162Z,1520509482.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:42.177Z,1520509482.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:42.561Z,1520509482.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:42.576Z,1520509482.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:42.965Z,1520509482.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:42.981Z,1520509482.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:43.366Z,1520509483.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:43.386Z,1520509483.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:43.765Z,1520509483.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:43.781Z,1520509483.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:44.161Z,1520509484.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:44.177Z,1520509484.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:44.561Z,1520509484.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:44.577Z,1520509484.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:44.965Z,1520509484.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:44.981Z,1520509484.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:45.366Z,1520509485.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:45.381Z,1520509485.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:45.766Z,1520509485.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:45.781Z,1520509485.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:46.152Z,1520509486.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:46.184Z,1520509486.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:46.561Z,1520509486.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:46.577Z,1520509486.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:46.966Z,1520509486.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:46.987Z,1520509486.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:47.366Z,1520509487.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:47.386Z,1520509487.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:47.766Z,1520509487.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:47.781Z,1520509487.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:48.158Z,1520509488.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:48.179Z,1520509488.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:48.561Z,1520509488.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:48.576Z,1520509488.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:48.966Z,1520509488.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:48.981Z,1520509488.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:49.367Z,1520509489.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:49.383Z,1520509489.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:49.761Z,1520509489.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:49.777Z,1520509489.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:50.161Z,1520509490.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:50.181Z,1520509490.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:50.556Z,1520509490.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:50.579Z,1520509490.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:50.968Z,1520509490.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:50.984Z,1520509490.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:51.368Z,1520509491.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:51.384Z,1520509491.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:51.769Z,1520509491.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:51.784Z,1520509491.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:52.162Z,1520509492.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:52.177Z,1520509492.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:52.559Z,1520509492.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:52.575Z,1520509492.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:52.969Z,1520509492.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:52.990Z,1520509492.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:53.365Z,1520509493.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:53.381Z,1520509493.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:53.768Z,1520509493.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:53.784Z,1520509493.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:54.162Z,1520509494.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:54.177Z,1520509494.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:54.560Z,1520509494.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:54.576Z,1520509494.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:54.969Z,1520509494.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:54.985Z,1520509494.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:55.369Z,1520509495.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:55.390Z,1520509495.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:55.768Z,1520509495.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:55.784Z,1520509495.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:56.160Z,1520509496.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:56.176Z,1520509496.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:56.547Z,1520509496.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:56.574Z,1520509496.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:56.973Z,1520509496.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:56.988Z,1520509496.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:57.372Z,1520509497.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:57.387Z,1520509497.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:57.773Z,1520509497.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:57.794Z,1520509497.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:58.145Z,1520509498.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:58.172Z,1520509498.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:58.547Z,1520509498.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:58.574Z,1520509498.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:58.969Z,1520509498.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:58.989Z,1520509498.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:59.366Z,1520509499.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:59.381Z,1520509499.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:44:59.763Z,1520509499.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:44:59.791Z,1520509499.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:00.152Z,1520509500.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:00.179Z,1520509500.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:00.551Z,1520509500.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:00.578Z,1520509500.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:00.962Z,1520509500.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:00.979Z,1520509500.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:01.370Z,1520509501.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:01.384Z,1520509501.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:01.773Z,1520509501.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:01.789Z,1520509501.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:02.151Z,1520509502.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:02.197Z,1520509502.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:02.551Z,1520509502.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:02.578Z,1520509502.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:02.973Z,1520509502.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:02.995Z,1520509502.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:03.373Z,1520509503.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:03.389Z,1520509503.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:03.769Z,1520509503.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:03.796Z,1520509503.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:04.152Z,1520509504.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:04.179Z,1520509504.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:04.547Z,1520509504.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:04.578Z,1520509504.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:04.973Z,1520509504.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:04.988Z,1520509504.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:05.373Z,1520509505.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:05.389Z,1520509505.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:05.753Z,1520509505.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:05.781Z,1520509505.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:06.148Z,1520509506.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:06.190Z,1520509506.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:06.552Z,1520509506.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:06.582Z,1520509506.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:06.974Z,1520509506.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:06.989Z,1520509506.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:07.371Z,1520509507.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:07.386Z,1520509507.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:07.773Z,1520509507.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:07.789Z,1520509507.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:08.148Z,1520509508.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:08.175Z,1520509508.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:08.547Z,1520509508.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:08.587Z,1520509508.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:08.961Z,1520509508.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:08.977Z,1520509508.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:09.365Z,1520509509.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:09.380Z,1520509509.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:09.768Z,1520509509.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:09.783Z,1520509509.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:10.158Z,1520509510.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:10.173Z,1520509510.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:10.557Z,1520509510.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:10.573Z,1520509510.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:10.961Z,1520509510.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:10.976Z,1520509510.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:11.369Z,1520509511.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:11.400Z,1520509511.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:11.765Z,1520509511.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:11.787Z,1520509511.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:12.163Z,1520509512.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:12.178Z,1520509512.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:12.561Z,1520509512.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:12.576Z,1520509512.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:12.966Z,1520509512.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:12.981Z,1520509512.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:13.366Z,1520509513.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:13.381Z,1520509513.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:13.766Z,1520509513.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:13.781Z,1520509513.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:14.160Z,1520509514.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:14.176Z,1520509514.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:14.557Z,1520509514.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:14.571Z,1520509514.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:14.965Z,1520509514.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:14.981Z,1520509514.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:15.365Z,1520509515.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:15.382Z,1520509515.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:15.765Z,1520509515.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:15.780Z,1520509515.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:16.160Z,1520509516.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:16.176Z,1520509516.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:19.250Z,1520509519.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:19.266Z,1520509519.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:19.377Z,1520509519.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:19.422Z,1520509519.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:19.752Z,1520509519.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:19.767Z,1520509519.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:20.125Z,1520509520.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:20.141Z,1520509520.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:20.527Z,1520509520.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:20.563Z,1520509520.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:20.922Z,1520509520.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:20.938Z,1520509520.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:21.325Z,1520509521.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:21.341Z,1520509521.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:21.725Z,1520509521.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:21.741Z,1520509521.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:22.138Z,1520509522.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:22.168Z,1520509522.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:22.525Z,1520509522.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:22.541Z,1520509522.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:22.939Z,1520509522.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:22.969Z,1520509522.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:23.321Z,1520509523.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:23.338Z,1520509523.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:23.720Z,1520509523.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:23.744Z,1520509523.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:24.124Z,1520509524.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:24.141Z,1520509524.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:24.519Z,1520509524.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:24.534Z,1520509524.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:24.931Z,1520509524.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:24.972Z,1520509524.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:25.329Z,1520509525.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:25.367Z,1520509525.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:25.765Z,1520509525.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:25.780Z,1520509525.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:26.126Z,1520509526.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:26.142Z,1520509526.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:26.538Z,1520509526.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:26.584Z,1520509526.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:26.929Z,1520509526.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:26.944Z,1520509526.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:27.333Z,1520509527.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:27.349Z,1520509527.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:27.732Z,1520509527.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:27.749Z,1520509527.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:28.123Z,1520509528.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:28.146Z,1520509528.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:28.529Z,1520509528.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:28.545Z,1520509528.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:28.932Z,1520509528.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:28.948Z,1520509528.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:29.333Z,1520509529.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:29.348Z,1520509529.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:29.733Z,1520509529.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:29.749Z,1520509529.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:30.123Z,1520509530.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:30.139Z,1520509530.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:30.519Z,1520509530.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:30.544Z,1520509530.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:30.933Z,1520509530.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:30.949Z,1520509530.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:31.334Z,1520509531.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:31.349Z,1520509531.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:31.732Z,1520509531.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:31.754Z,1520509531.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:32.125Z,1520509532.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:32.141Z,1520509532.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:32.515Z,1520509532.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:32.554Z,1520509532.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:32.933Z,1520509532.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:32.958Z,1520509532.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:33.345Z,1520509533.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:33.360Z,1520509533.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:33.734Z,1520509533.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:33.757Z,1520509533.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:34.120Z,1520509534.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:34.136Z,1520509534.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:34.515Z,1520509534.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:34.531Z,1520509534.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:34.937Z,1520509534.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:34.966Z,1520509534.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:35.337Z,1520509535.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:35.362Z,1520509535.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:35.737Z,1520509535.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:35.762Z,1520509535.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:36.123Z,1520509536.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:36.139Z,1520509536.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:36.522Z,1520509536.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:36.538Z,1520509536.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:36.938Z,1520509536.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:36.963Z,1520509536.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:37.338Z,1520509537.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:37.363Z,1520509537.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:37.733Z,1520509537.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:37.765Z,1520509537.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:38.122Z,1520509538.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:38.138Z,1520509538.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:38.524Z,1520509538.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:38.540Z,1520509538.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:38.933Z,1520509538.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:38.963Z,1520509538.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:39.333Z,1520509539.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:39.361Z,1520509539.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:39.729Z,1520509539.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:39.771Z,1520509539.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:40.120Z,1520509540.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:40.136Z,1520509540.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:40.520Z,1520509540.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:40.536Z,1520509540.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:40.938Z,1520509540.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:40.961Z,1520509540.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:41.333Z,1520509541.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:41.368Z,1520509541.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:41.737Z,1520509541.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:41.761Z,1520509541.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:42.121Z,1520509542.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:42.149Z,1520509542.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:42.523Z,1520509542.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:42.539Z,1520509542.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:42.929Z,1520509542.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:42.946Z,1520509542.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:43.337Z,1520509543.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:43.368Z,1520509543.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:43.737Z,1520509543.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:43.767Z,1520509543.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:44.125Z,1520509544.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:44.142Z,1520509544.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:44.524Z,1520509544.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:44.540Z,1520509544.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:44.937Z,1520509544.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:44.967Z,1520509544.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:45.338Z,1520509545.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:45.365Z,1520509545.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:45.729Z,1520509545.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:45.766Z,1520509545.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:46.125Z,1520509546.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:46.141Z,1520509546.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:46.524Z,1520509546.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:46.539Z,1520509546.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:46.938Z,1520509546.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:46.969Z,1520509546.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:47.333Z,1520509547.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:47.348Z,1520509547.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:47.730Z,1520509547.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:47.750Z,1520509547.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:48.127Z,1520509548.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:48.143Z,1520509548.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:48.526Z,1520509548.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:48.542Z,1520509548.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:48.935Z,1520509548.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:48.951Z,1520509548.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:49.334Z,1520509549.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:49.350Z,1520509549.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:49.729Z,1520509549.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:49.745Z,1520509549.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:50.128Z,1520509550.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:50.145Z,1520509550.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:50.526Z,1520509550.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:50.542Z,1520509550.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:50.929Z,1520509550.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:50.946Z,1520509550.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:51.334Z,1520509551.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:51.350Z,1520509551.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:51.730Z,1520509551.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:51.750Z,1520509551.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:52.123Z,1520509552.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:52.138Z,1520509552.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:52.527Z,1520509552.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:52.543Z,1520509552.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:52.929Z,1520509552.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:52.950Z,1520509552.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:53.333Z,1520509553.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:53.348Z,1520509553.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:53.729Z,1520509553.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:53.750Z,1520509553.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:54.127Z,1520509554.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:54.143Z,1520509554.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:54.526Z,1520509554.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:54.541Z,1520509554.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:54.934Z,1520509554.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:54.950Z,1520509554.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:55.334Z,1520509555.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:55.349Z,1520509555.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:55.729Z,1520509555.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:55.745Z,1520509555.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:56.129Z,1520509556.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:56.145Z,1520509556.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:56.527Z,1520509556.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:56.543Z,1520509556.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:56.929Z,1520509556.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:56.950Z,1520509556.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:57.330Z,1520509557.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:57.346Z,1520509557.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:57.729Z,1520509557.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:57.750Z,1520509557.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:58.128Z,1520509558.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:58.143Z,1520509558.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:58.518Z,1520509558.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:58.541Z,1520509558.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:58.929Z,1520509558.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:58.951Z,1520509558.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:59.332Z,1520509559.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:59.347Z,1520509559.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:45:59.729Z,1520509559.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:45:59.750Z,1520509559.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:00.126Z,1520509560.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:00.143Z,1520509560.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:00.527Z,1520509560.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:00.542Z,1520509560.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:00.930Z,1520509560.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:00.946Z,1520509560.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:01.334Z,1520509561.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:01.350Z,1520509561.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:01.729Z,1520509561.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:01.745Z,1520509561.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:02.120Z,1520509562.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:02.142Z,1520509562.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:02.522Z,1520509562.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:02.542Z,1520509562.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:02.929Z,1520509562.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:02.946Z,1520509562.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:03.329Z,1520509563.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:03.351Z,1520509563.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:03.729Z,1520509563.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:03.745Z,1520509563.745 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:03.746Z,1520509563.746 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81
2018-03-08T11:46:03.746Z,1520509563.746 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T11:46:03.747Z,1520509563.747 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:03.747Z,1520509563.747 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81
2018-03-08T11:46:03.748Z,1520509563.748 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T11:46:03.749Z,1520509563.749 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:03.749Z,1520509563.749 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 81
2018-03-08T11:46:03.750Z,1520509563.750 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T11:46:03.778Z,1520509563.778 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T11:46:03.778Z,1520509563.778 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T11:46:03.778Z,1520509563.778 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T11:46:04.135Z,1520509564.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:04.181Z,1520509564.181 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T11:46:04.181Z,1520509564.181 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81
2018-03-08T11:46:04.182Z,1520509564.182 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T11:46:04.182Z,1520509564.182 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81
2018-03-08T11:46:04.182Z,1520509564.182 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T11:46:04.182Z,1520509564.182 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 81
2018-03-08T11:46:04.528Z,1520509564.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:04.543Z,1520509564.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T11:46:04.543Z,1520509564.543 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:46:04.544Z,1520509564.544 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:46:04.544Z,1520509564.544 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T11:46:04.545Z,1520509564.545 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:46:04.545Z,1520509564.545 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:46:04.545Z,1520509564.545 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T11:46:04.546Z,1520509564.546 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:46:04.546Z,1520509564.546 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:46:04.937Z,1520509564.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:04.952Z,1520509564.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T11:46:04.953Z,1520509564.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:05.337Z,1520509565.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:05.358Z,1520509565.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T11:46:05.359Z,1520509565.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:05.728Z,1520509565.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:05.750Z,1520509565.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T11:46:05.751Z,1520509565.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:06.128Z,1520509566.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:06.150Z,1520509566.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T11:46:06.151Z,1520509566.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:06.510Z,1520509566.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:06.542Z,1520509566.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T11:46:06.543Z,1520509566.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:06.934Z,1520509566.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:06.950Z,1520509566.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T11:46:06.951Z,1520509566.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:07.340Z,1520509567.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:07.355Z,1520509567.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T11:46:07.356Z,1520509567.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:07.737Z,1520509567.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:07.758Z,1520509567.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T11:46:07.759Z,1520509567.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:08.113Z,1520509568.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:08.148Z,1520509568.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T11:46:08.149Z,1520509568.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:08.532Z,1520509568.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:08.548Z,1520509568.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T11:46:08.549Z,1520509568.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:08.932Z,1520509568.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:08.947Z,1520509568.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T11:46:08.948Z,1520509568.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:09.333Z,1520509569.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:09.348Z,1520509569.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T11:46:09.349Z,1520509569.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:09.732Z,1520509569.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:09.748Z,1520509569.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T11:46:09.749Z,1520509569.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:10.127Z,1520509570.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:10.143Z,1520509570.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T11:46:10.144Z,1520509570.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:10.528Z,1520509570.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:10.543Z,1520509570.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T11:46:10.545Z,1520509570.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:10.934Z,1520509570.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:10.949Z,1520509570.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T11:46:10.950Z,1520509570.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:11.331Z,1520509571.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:11.354Z,1520509571.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T11:46:11.355Z,1520509571.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:11.730Z,1520509571.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:11.745Z,1520509571.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T11:46:11.746Z,1520509571.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:12.127Z,1520509572.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:12.143Z,1520509572.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T11:46:12.144Z,1520509572.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:12.523Z,1520509572.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:12.538Z,1520509572.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T11:46:12.539Z,1520509572.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:12.934Z,1520509572.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:12.949Z,1520509572.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T11:46:12.950Z,1520509572.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:13.334Z,1520509573.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:13.349Z,1520509573.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T11:46:13.350Z,1520509573.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:13.732Z,1520509573.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:13.747Z,1520509573.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T11:46:13.748Z,1520509573.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:14.121Z,1520509574.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:14.137Z,1520509574.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T11:46:14.138Z,1520509574.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:14.517Z,1520509574.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:14.545Z,1520509574.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T11:46:14.546Z,1520509574.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:14.937Z,1520509574.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:14.952Z,1520509574.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T11:46:14.953Z,1520509574.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:15.329Z,1520509575.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:15.345Z,1520509575.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T11:46:15.346Z,1520509575.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:15.737Z,1520509575.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:15.753Z,1520509575.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T11:46:15.753Z,1520509575.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:16.123Z,1520509576.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:16.138Z,1520509576.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T11:46:16.139Z,1520509576.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:16.528Z,1520509576.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:16.544Z,1520509576.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T11:46:16.545Z,1520509576.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:19.646Z,1520509579.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:19.678Z,1520509579.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2018-03-08T11:46:19.679Z,1520509579.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:19.782Z,1520509579.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:19.827Z,1520509579.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T11:46:19.828Z,1520509579.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:20.150Z,1520509580.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:20.180Z,1520509580.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T11:46:20.181Z,1520509580.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:20.537Z,1520509580.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:20.558Z,1520509580.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T11:46:20.559Z,1520509580.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:20.939Z,1520509580.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:20.954Z,1520509580.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T11:46:20.955Z,1520509580.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:21.337Z,1520509581.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:21.352Z,1520509581.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T11:46:21.353Z,1520509581.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:21.737Z,1520509581.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:21.753Z,1520509581.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T11:46:21.754Z,1520509581.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:22.137Z,1520509582.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:22.152Z,1520509582.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T11:46:22.153Z,1520509582.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:22.549Z,1520509582.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:22.564Z,1520509582.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T11:46:22.587Z,1520509582.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:22.942Z,1520509582.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:22.962Z,1520509582.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T11:46:22.963Z,1520509582.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:23.339Z,1520509583.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:23.354Z,1520509583.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T11:46:23.355Z,1520509583.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:23.737Z,1520509583.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:23.752Z,1520509583.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:24.140Z,1520509584.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:24.155Z,1520509584.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:24.537Z,1520509584.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:24.553Z,1520509584.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:24.945Z,1520509584.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:24.961Z,1520509584.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:25.346Z,1520509585.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:25.361Z,1520509585.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:25.742Z,1520509585.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:25.762Z,1520509585.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:26.141Z,1520509586.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:26.156Z,1520509586.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:26.535Z,1520509586.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:26.556Z,1520509586.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:26.941Z,1520509586.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:26.957Z,1520509586.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:27.346Z,1520509587.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:27.361Z,1520509587.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:27.742Z,1520509587.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:27.758Z,1520509587.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:28.138Z,1520509588.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:28.155Z,1520509588.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:28.539Z,1520509588.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:28.554Z,1520509588.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:28.942Z,1520509588.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:28.963Z,1520509588.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:29.345Z,1520509589.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:29.362Z,1520509589.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:29.742Z,1520509589.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:29.757Z,1520509589.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:30.140Z,1520509590.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:30.155Z,1520509590.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:30.539Z,1520509590.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:30.554Z,1520509590.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:30.942Z,1520509590.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:30.957Z,1520509590.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:31.347Z,1520509591.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:31.362Z,1520509591.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:31.742Z,1520509591.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:31.757Z,1520509591.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:32.137Z,1520509592.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:32.152Z,1520509592.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:32.534Z,1520509592.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:32.554Z,1520509592.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:32.946Z,1520509592.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:32.969Z,1520509592.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:33.350Z,1520509593.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:33.386Z,1520509593.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:33.742Z,1520509593.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:33.762Z,1520509593.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:34.137Z,1520509594.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:34.153Z,1520509594.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:34.536Z,1520509594.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:34.551Z,1520509594.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:34.950Z,1520509594.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:34.983Z,1520509594.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:35.342Z,1520509595.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:35.357Z,1520509595.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:35.742Z,1520509595.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:35.757Z,1520509595.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:36.135Z,1520509596.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:36.155Z,1520509596.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:36.537Z,1520509596.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:36.552Z,1520509596.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:36.942Z,1520509596.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:36.957Z,1520509596.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:37.338Z,1520509597.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:37.354Z,1520509597.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:37.750Z,1520509597.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:37.777Z,1520509597.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:38.143Z,1520509598.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:38.158Z,1520509598.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:38.530Z,1520509598.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:38.564Z,1520509598.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:38.942Z,1520509598.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:38.958Z,1520509598.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:39.346Z,1520509599.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:39.361Z,1520509599.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:39.741Z,1520509599.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:39.757Z,1520509599.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:40.136Z,1520509600.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:40.152Z,1520509600.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:40.536Z,1520509600.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:40.552Z,1520509600.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:40.941Z,1520509600.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:40.957Z,1520509600.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:41.342Z,1520509601.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:41.358Z,1520509601.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:41.742Z,1520509601.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:41.757Z,1520509601.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:42.139Z,1520509602.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:42.155Z,1520509602.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:42.539Z,1520509602.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:42.554Z,1520509602.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:42.942Z,1520509602.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:42.958Z,1520509602.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:43.341Z,1520509603.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:43.356Z,1520509603.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:43.742Z,1520509603.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:43.757Z,1520509603.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:44.138Z,1520509604.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:44.153Z,1520509604.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:44.530Z,1520509604.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:44.559Z,1520509604.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:44.949Z,1520509604.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:44.964Z,1520509604.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:45.349Z,1520509605.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:45.370Z,1520509605.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:45.741Z,1520509605.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:45.764Z,1520509605.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:46.140Z,1520509606.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:46.156Z,1520509606.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:46.527Z,1520509606.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:46.554Z,1520509606.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:46.947Z,1520509606.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:46.962Z,1520509606.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:47.345Z,1520509607.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:47.361Z,1520509607.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:47.751Z,1520509607.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:47.770Z,1520509607.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:48.141Z,1520509608.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:48.157Z,1520509608.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:48.528Z,1520509608.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:48.562Z,1520509608.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:48.949Z,1520509608.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:48.964Z,1520509608.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:49.342Z,1520509609.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:49.362Z,1520509609.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:49.749Z,1520509609.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:49.765Z,1520509609.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:50.128Z,1520509610.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:50.155Z,1520509610.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:50.541Z,1520509610.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:50.557Z,1520509610.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:50.946Z,1520509610.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:50.961Z,1520509610.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:51.351Z,1520509611.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:51.366Z,1520509611.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:51.742Z,1520509611.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:51.762Z,1520509611.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:52.140Z,1520509612.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:52.156Z,1520509612.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:52.527Z,1520509612.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:52.555Z,1520509612.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:52.946Z,1520509612.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:52.966Z,1520509612.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:53.353Z,1520509613.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:53.368Z,1520509613.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:53.751Z,1520509613.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:53.766Z,1520509613.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:54.141Z,1520509614.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:54.156Z,1520509614.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:54.527Z,1520509614.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:54.554Z,1520509614.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:54.950Z,1520509614.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:54.970Z,1520509614.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:55.344Z,1520509615.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:55.359Z,1520509615.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:55.749Z,1520509615.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:55.765Z,1520509615.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:56.141Z,1520509616.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:56.156Z,1520509616.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:56.527Z,1520509616.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:56.554Z,1520509616.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:56.946Z,1520509616.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:56.966Z,1520509616.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:57.354Z,1520509617.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:57.374Z,1520509617.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:57.738Z,1520509617.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:57.769Z,1520509617.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:58.141Z,1520509618.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:58.157Z,1520509618.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:58.522Z,1520509618.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:58.551Z,1520509618.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:58.938Z,1520509618.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:58.969Z,1520509618.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:59.349Z,1520509619.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:59.365Z,1520509619.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:46:59.754Z,1520509619.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:46:59.774Z,1520509619.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:00.143Z,1520509620.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:00.158Z,1520509620.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:00.527Z,1520509620.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:00.555Z,1520509620.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:00.947Z,1520509620.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:00.962Z,1520509620.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:01.347Z,1520509621.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:01.362Z,1520509621.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:01.750Z,1520509621.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:01.770Z,1520509621.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:02.128Z,1520509622.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:02.169Z,1520509622.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:02.541Z,1520509622.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:02.556Z,1520509622.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:02.950Z,1520509622.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:02.970Z,1520509622.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:03.354Z,1520509623.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:03.374Z,1520509623.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:03.744Z,1520509623.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:03.759Z,1520509623.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:04.128Z,1520509624.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:04.167Z,1520509624.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:04.531Z,1520509624.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:04.566Z,1520509624.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:04.948Z,1520509624.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:04.964Z,1520509624.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:05.355Z,1520509625.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:05.374Z,1520509625.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:05.754Z,1520509625.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:05.770Z,1520509625.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:06.129Z,1520509626.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:06.156Z,1520509626.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:06.527Z,1520509626.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:06.554Z,1520509626.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:06.945Z,1520509626.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:06.978Z,1520509626.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:07.341Z,1520509627.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:07.365Z,1520509627.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:07.745Z,1520509627.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:07.769Z,1520509627.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:08.131Z,1520509628.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:08.166Z,1520509628.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:08.523Z,1520509628.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:08.555Z,1520509628.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:08.938Z,1520509628.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:08.975Z,1520509628.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:09.357Z,1520509629.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:09.378Z,1520509629.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:09.743Z,1520509629.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:09.773Z,1520509629.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:10.136Z,1520509630.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:10.164Z,1520509630.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:10.535Z,1520509630.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:10.566Z,1520509630.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:10.949Z,1520509630.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:10.969Z,1520509630.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:11.360Z,1520509631.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:11.382Z,1520509631.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:11.758Z,1520509631.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:11.774Z,1520509631.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:12.136Z,1520509632.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:12.164Z,1520509632.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:12.531Z,1520509632.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:12.566Z,1520509632.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:12.961Z,1520509632.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:12.976Z,1520509632.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:13.349Z,1520509633.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:13.369Z,1520509633.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:13.753Z,1520509633.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:13.768Z,1520509633.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:14.136Z,1520509634.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:14.165Z,1520509634.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:14.534Z,1520509634.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:14.564Z,1520509634.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:14.952Z,1520509634.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:14.968Z,1520509634.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:15.360Z,1520509635.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:15.376Z,1520509635.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:15.753Z,1520509635.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:15.769Z,1520509635.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:16.136Z,1520509636.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:16.160Z,1520509636.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:16.535Z,1520509636.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:16.570Z,1520509636.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:19.759Z,1520509639.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:19.807Z,1520509639.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:19.910Z,1520509639.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:19.942Z,1520509639.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:20.281Z,1520509640.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:20.312Z,1520509640.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:20.663Z,1520509640.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:20.679Z,1520509640.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:21.068Z,1520509641.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:21.083Z,1520509641.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:21.468Z,1520509641.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:21.483Z,1520509641.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:21.860Z,1520509641.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:21.877Z,1520509641.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:22.269Z,1520509642.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:22.285Z,1520509642.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:22.673Z,1520509642.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:22.689Z,1520509642.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:23.068Z,1520509643.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:23.090Z,1520509643.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:23.466Z,1520509643.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:23.481Z,1520509643.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:23.867Z,1520509643.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:23.883Z,1520509643.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:24.267Z,1520509644.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:24.283Z,1520509644.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:24.666Z,1520509644.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:24.686Z,1520509644.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:25.073Z,1520509645.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:25.089Z,1520509645.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:25.473Z,1520509645.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:25.489Z,1520509645.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:25.869Z,1520509645.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:25.885Z,1520509645.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:26.268Z,1520509646.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:26.283Z,1520509646.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:26.664Z,1520509646.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:26.681Z,1520509646.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:27.066Z,1520509647.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:27.082Z,1520509647.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:27.464Z,1520509647.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:27.480Z,1520509647.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:27.864Z,1520509647.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:27.879Z,1520509647.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:28.268Z,1520509648.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:28.284Z,1520509648.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:28.673Z,1520509648.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:28.689Z,1520509648.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:29.074Z,1520509649.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:29.094Z,1520509649.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:29.462Z,1520509649.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:29.478Z,1520509649.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:29.859Z,1520509649.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:29.890Z,1520509649.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:30.268Z,1520509650.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:30.284Z,1520509650.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:30.662Z,1520509650.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:30.681Z,1520509650.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:31.078Z,1520509651.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:31.093Z,1520509651.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:31.474Z,1520509651.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:31.494Z,1520509651.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:31.876Z,1520509651.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:31.892Z,1520509651.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:32.269Z,1520509652.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:32.284Z,1520509652.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:32.661Z,1520509652.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:32.682Z,1520509652.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:33.063Z,1520509653.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:33.079Z,1520509653.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:33.460Z,1520509653.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:33.483Z,1520509653.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:33.867Z,1520509653.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:33.886Z,1520509653.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:34.277Z,1520509654.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:34.298Z,1520509654.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:34.681Z,1520509654.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:34.696Z,1520509654.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:35.080Z,1520509655.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:35.102Z,1520509655.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:35.466Z,1520509655.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:35.482Z,1520509655.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:35.856Z,1520509655.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:35.904Z,1520509655.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:36.267Z,1520509656.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:36.283Z,1520509656.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:36.651Z,1520509656.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:36.678Z,1520509656.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:37.082Z,1520509657.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:37.097Z,1520509657.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:37.481Z,1520509657.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:37.496Z,1520509657.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:37.877Z,1520509657.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:37.892Z,1520509657.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:38.259Z,1520509658.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:38.286Z,1520509658.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:38.651Z,1520509658.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:38.683Z,1520509658.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:39.059Z,1520509659.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:39.087Z,1520509659.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:39.456Z,1520509659.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:39.479Z,1520509659.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:39.859Z,1520509659.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:39.890Z,1520509659.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:40.261Z,1520509660.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:40.287Z,1520509660.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:40.682Z,1520509660.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:40.697Z,1520509660.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:41.066Z,1520509661.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:41.103Z,1520509661.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:41.459Z,1520509661.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:41.491Z,1520509661.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:41.859Z,1520509661.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:41.875Z,1520509661.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:42.259Z,1520509662.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:42.275Z,1520509662.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:42.659Z,1520509662.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:42.674Z,1520509662.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:43.077Z,1520509663.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:43.104Z,1520509663.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:43.469Z,1520509663.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:43.498Z,1520509663.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:43.876Z,1520509663.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:43.901Z,1520509663.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:44.260Z,1520509664.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:44.275Z,1520509664.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:44.663Z,1520509664.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:44.678Z,1520509664.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:45.057Z,1520509665.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:45.073Z,1520509665.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:45.462Z,1520509665.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:45.481Z,1520509665.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:45.865Z,1520509665.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:45.881Z,1520509665.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:46.277Z,1520509666.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:46.308Z,1520509666.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:46.673Z,1520509666.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:46.688Z,1520509666.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:47.077Z,1520509667.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:47.109Z,1520509667.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:47.466Z,1520509667.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:47.482Z,1520509667.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:47.861Z,1520509667.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:47.889Z,1520509667.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:48.267Z,1520509668.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:48.283Z,1520509668.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:48.667Z,1520509668.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:48.682Z,1520509668.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:49.073Z,1520509669.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:49.089Z,1520509669.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:49.473Z,1520509669.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:49.489Z,1520509669.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:49.872Z,1520509669.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:49.888Z,1520509669.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:50.269Z,1520509670.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:50.290Z,1520509670.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:50.652Z,1520509670.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:50.691Z,1520509670.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:51.067Z,1520509671.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:51.082Z,1520509671.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:51.456Z,1520509671.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:51.546Z,1520509671.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:51.859Z,1520509671.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:51.874Z,1520509671.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:52.268Z,1520509672.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:52.284Z,1520509672.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:52.674Z,1520509672.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:52.689Z,1520509672.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:53.069Z,1520509673.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:53.085Z,1520509673.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:53.504Z,1520509673.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:53.519Z,1520509673.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:53.857Z,1520509673.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:53.872Z,1520509673.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:54.260Z,1520509674.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:54.276Z,1520509674.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:54.659Z,1520509674.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:54.675Z,1520509674.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:55.070Z,1520509675.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:55.091Z,1520509675.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:55.474Z,1520509675.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:55.494Z,1520509675.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:55.870Z,1520509675.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:55.885Z,1520509675.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:56.255Z,1520509676.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:56.275Z,1520509676.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:56.655Z,1520509676.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:56.683Z,1520509676.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:57.053Z,1520509677.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:57.085Z,1520509677.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:57.471Z,1520509677.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:57.487Z,1520509677.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:57.851Z,1520509677.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:57.883Z,1520509677.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:58.277Z,1520509678.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:58.294Z,1520509678.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:58.675Z,1520509678.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:58.697Z,1520509678.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:59.077Z,1520509679.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:59.093Z,1520509679.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:59.458Z,1520509679.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:59.486Z,1520509679.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:47:59.855Z,1520509679.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:47:59.883Z,1520509679.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:00.258Z,1520509680.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:00.290Z,1520509680.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:00.658Z,1520509680.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:00.695Z,1520509680.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:01.078Z,1520509681.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:01.094Z,1520509681.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:01.481Z,1520509681.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:01.498Z,1520509681.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:01.865Z,1520509681.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:01.899Z,1520509681.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:02.260Z,1520509682.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:02.290Z,1520509682.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:02.651Z,1520509682.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:02.686Z,1520509682.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:03.058Z,1520509683.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:03.090Z,1520509683.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:03.460Z,1520509683.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:03.500Z,1520509683.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:03.859Z,1520509683.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:03.874Z,1520509683.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:04.270Z,1520509684.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:04.302Z,1520509684.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:04.673Z,1520509684.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:04.697Z,1520509684.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:05.077Z,1520509685.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:05.106Z,1520509685.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:05.463Z,1520509685.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:05.478Z,1520509685.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:05.864Z,1520509685.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:05.880Z,1520509685.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:06.264Z,1520509686.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:06.287Z,1520509686.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:06.659Z,1520509686.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:06.676Z,1520509686.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:07.078Z,1520509687.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:07.108Z,1520509687.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:07.465Z,1520509687.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:07.486Z,1520509687.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:07.877Z,1520509687.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:07.909Z,1520509687.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:08.261Z,1520509688.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:08.279Z,1520509688.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:08.658Z,1520509688.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:08.677Z,1520509688.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:09.061Z,1520509689.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:09.078Z,1520509689.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:09.464Z,1520509689.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:09.479Z,1520509689.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:09.865Z,1520509689.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:09.880Z,1520509689.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:10.277Z,1520509690.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:10.308Z,1520509690.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:10.669Z,1520509690.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:10.684Z,1520509690.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:11.077Z,1520509691.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:11.107Z,1520509691.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:11.459Z,1520509691.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:11.474Z,1520509691.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:11.865Z,1520509691.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:11.879Z,1520509691.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:12.264Z,1520509692.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:12.280Z,1520509692.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:12.664Z,1520509692.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:12.679Z,1520509692.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:13.065Z,1520509693.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:13.080Z,1520509693.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:13.477Z,1520509693.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:13.508Z,1520509693.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:13.865Z,1520509693.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:13.880Z,1520509693.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:14.264Z,1520509694.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:14.279Z,1520509694.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:14.664Z,1520509694.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:14.680Z,1520509694.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:15.064Z,1520509695.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:15.079Z,1520509695.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:15.464Z,1520509695.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:15.479Z,1520509695.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:15.482Z,1520509695.482 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T11:48:15.482Z,1520509695.482 [Default:CheckIn:C.Wait] Stopped
2018-03-08T11:48:15.482Z,1520509695.482 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T11:48:15.482Z,1520509695.482 [Default:CheckIn:D] Running Loop=1
2018-03-08T11:48:15.864Z,1520509695.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:15.881Z,1520509695.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:15.884Z,1520509695.884 [Default:CheckIn:D] Stopped
2018-03-08T11:48:15.884Z,1520509695.884 [Default:CheckIn:E] Running Loop=1
2018-03-08T11:48:16.264Z,1520509696.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:16.286Z,1520509696.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:16.290Z,1520509696.290 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 242.517969 min 
2018-03-08T11:48:16.290Z,1520509696.290 [Default:CheckIn:E] Stopped
2018-03-08T11:48:16.290Z,1520509696.290 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T11:48:16.290Z,1520509696.290 [Default:CheckIn] Stopped
2018-03-08T11:48:16.290Z,1520509696.290 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T11:48:16.291Z,1520509696.291 [Default:CheckIn](INFO): Running loop #24
2018-03-08T11:48:16.291Z,1520509696.291 [Default:CheckIn] Running Loop=24
2018-03-08T11:48:16.291Z,1520509696.291 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T11:48:16.291Z,1520509696.291 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T11:48:16.673Z,1520509696.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:16.688Z,1520509696.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:19.770Z,1520509699.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:19.791Z,1520509699.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:19.892Z,1520509699.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:19.927Z,1520509699.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:20.272Z,1520509700.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:20.287Z,1520509700.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:20.672Z,1520509700.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:20.687Z,1520509700.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:21.085Z,1520509701.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:21.117Z,1520509701.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:21.477Z,1520509701.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:21.492Z,1520509701.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:21.876Z,1520509701.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:21.892Z,1520509701.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:22.270Z,1520509702.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:22.286Z,1520509702.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:22.667Z,1520509702.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:22.682Z,1520509702.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:23.071Z,1520509703.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:23.086Z,1520509703.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:23.473Z,1520509703.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:23.488Z,1520509703.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:23.868Z,1520509703.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:23.883Z,1520509703.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:24.276Z,1520509704.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:24.292Z,1520509704.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:24.676Z,1520509704.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:24.691Z,1520509704.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:25.076Z,1520509705.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:25.091Z,1520509705.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:25.472Z,1520509705.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:25.494Z,1520509705.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:25.871Z,1520509705.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:25.887Z,1520509705.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:26.268Z,1520509706.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:26.290Z,1520509706.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:26.668Z,1520509706.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:26.684Z,1520509706.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:27.072Z,1520509707.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:27.088Z,1520509707.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:27.476Z,1520509707.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:27.492Z,1520509707.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:27.876Z,1520509707.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:27.898Z,1520509707.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:28.267Z,1520509708.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:28.283Z,1520509708.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:28.668Z,1520509708.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:28.683Z,1520509708.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:29.071Z,1520509709.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:29.087Z,1520509709.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:29.471Z,1520509709.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:29.487Z,1520509709.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:29.864Z,1520509709.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:29.879Z,1520509709.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:30.277Z,1520509710.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:30.293Z,1520509710.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:30.676Z,1520509710.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:30.692Z,1520509710.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:31.077Z,1520509711.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:31.092Z,1520509711.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:31.471Z,1520509711.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:31.487Z,1520509711.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:31.868Z,1520509711.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:31.883Z,1520509711.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:32.269Z,1520509712.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:32.285Z,1520509712.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:32.671Z,1520509712.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:32.687Z,1520509712.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:33.077Z,1520509713.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:33.093Z,1520509713.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:33.477Z,1520509713.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:33.492Z,1520509713.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:33.876Z,1520509713.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:33.892Z,1520509713.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:34.267Z,1520509714.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:34.283Z,1520509714.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:34.663Z,1520509714.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:34.679Z,1520509714.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:35.066Z,1520509715.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:35.087Z,1520509715.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:35.471Z,1520509715.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:35.487Z,1520509715.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:35.869Z,1520509715.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:35.884Z,1520509715.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:36.276Z,1520509716.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:36.292Z,1520509716.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:36.676Z,1520509716.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:36.692Z,1520509716.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:37.077Z,1520509717.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:37.092Z,1520509717.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:37.471Z,1520509717.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:37.486Z,1520509717.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:37.871Z,1520509717.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:37.887Z,1520509717.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:38.269Z,1520509718.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:38.290Z,1520509718.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:38.671Z,1520509718.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:38.687Z,1520509718.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:39.073Z,1520509719.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:39.088Z,1520509719.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:39.477Z,1520509719.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:39.491Z,1520509719.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:39.877Z,1520509719.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:39.893Z,1520509719.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:40.271Z,1520509720.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:40.286Z,1520509720.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:40.669Z,1520509720.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:40.684Z,1520509720.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:41.071Z,1520509721.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:41.087Z,1520509721.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:41.472Z,1520509721.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:41.487Z,1520509721.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:41.873Z,1520509721.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:41.888Z,1520509721.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:42.276Z,1520509722.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:42.292Z,1520509722.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:42.677Z,1520509722.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:42.692Z,1520509722.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:43.081Z,1520509723.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:43.102Z,1520509723.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:43.457Z,1520509723.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:43.480Z,1520509723.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:43.868Z,1520509723.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:43.883Z,1520509723.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:44.270Z,1520509724.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:44.285Z,1520509724.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:44.661Z,1520509724.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:44.685Z,1520509724.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:45.076Z,1520509725.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:45.092Z,1520509725.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:45.478Z,1520509725.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:45.493Z,1520509725.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:45.871Z,1520509725.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:45.898Z,1520509725.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:46.270Z,1520509726.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:46.287Z,1520509726.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:46.668Z,1520509726.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:46.684Z,1520509726.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:47.056Z,1520509727.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:47.086Z,1520509727.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:47.469Z,1520509727.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:47.485Z,1520509727.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:47.868Z,1520509727.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:47.883Z,1520509727.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:48.280Z,1520509728.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:48.296Z,1520509728.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:48.680Z,1520509728.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:48.695Z,1520509728.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:49.081Z,1520509729.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:49.103Z,1520509729.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:49.452Z,1520509729.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:49.515Z,1520509729.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:49.871Z,1520509729.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:49.887Z,1520509729.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:50.260Z,1520509730.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:50.286Z,1520509730.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:50.656Z,1520509730.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:50.691Z,1520509730.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:51.077Z,1520509731.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:51.093Z,1520509731.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:51.482Z,1520509731.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:51.497Z,1520509731.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:51.869Z,1520509731.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:51.891Z,1520509731.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:52.271Z,1520509732.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:52.287Z,1520509732.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:52.659Z,1520509732.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:52.685Z,1520509732.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:53.056Z,1520509733.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:53.090Z,1520509733.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:53.459Z,1520509733.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:53.487Z,1520509733.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:53.862Z,1520509733.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:53.889Z,1520509733.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:54.278Z,1520509734.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:54.298Z,1520509734.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:54.681Z,1520509734.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:54.696Z,1520509734.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:55.080Z,1520509735.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:55.107Z,1520509735.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:55.456Z,1520509735.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:55.490Z,1520509735.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:55.863Z,1520509735.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:55.890Z,1520509735.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:56.259Z,1520509736.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:56.287Z,1520509736.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:56.656Z,1520509736.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:56.690Z,1520509736.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:57.081Z,1520509737.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:57.097Z,1520509737.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:57.481Z,1520509737.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:57.502Z,1520509737.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:57.877Z,1520509737.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:57.893Z,1520509737.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:58.259Z,1520509738.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:58.285Z,1520509738.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:58.659Z,1520509738.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:58.685Z,1520509738.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:59.057Z,1520509739.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:59.084Z,1520509739.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:59.459Z,1520509739.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:59.495Z,1520509739.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:48:59.859Z,1520509739.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:48:59.890Z,1520509739.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:00.282Z,1520509740.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:00.297Z,1520509740.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:00.681Z,1520509740.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:00.696Z,1520509740.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:01.079Z,1520509741.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:01.095Z,1520509741.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:01.459Z,1520509741.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:01.494Z,1520509741.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:01.863Z,1520509741.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:01.899Z,1520509741.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:02.260Z,1520509742.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:02.297Z,1520509742.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:02.653Z,1520509742.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:02.668Z,1520509742.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:03.073Z,1520509743.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:03.101Z,1520509743.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:03.473Z,1520509743.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:03.499Z,1520509743.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:03.870Z,1520509743.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:03.897Z,1520509743.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:04.263Z,1520509744.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:04.298Z,1520509744.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:04.662Z,1520509744.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:04.677Z,1520509744.677 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:04.677Z,1520509744.677 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82
2018-03-08T11:49:04.677Z,1520509744.677 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T11:49:04.679Z,1520509744.679 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:04.679Z,1520509744.679 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82
2018-03-08T11:49:04.679Z,1520509744.679 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T11:49:04.712Z,1520509744.712 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:04.713Z,1520509744.713 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 82
2018-03-08T11:49:04.713Z,1520509744.713 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T11:49:04.746Z,1520509744.746 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T11:49:04.746Z,1520509744.746 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T11:49:04.746Z,1520509744.746 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T11:49:05.063Z,1520509745.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:05.089Z,1520509745.089 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T11:49:05.089Z,1520509745.089 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82
2018-03-08T11:49:05.090Z,1520509745.090 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T11:49:05.090Z,1520509745.090 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82
2018-03-08T11:49:05.090Z,1520509745.090 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T11:49:05.090Z,1520509745.090 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 82
2018-03-08T11:49:05.464Z,1520509745.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:05.486Z,1520509745.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T11:49:05.487Z,1520509745.487 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:49:05.487Z,1520509745.487 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:49:05.487Z,1520509745.487 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T11:49:05.488Z,1520509745.488 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:49:05.488Z,1520509745.488 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:49:05.489Z,1520509745.489 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T11:49:05.489Z,1520509745.489 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:49:05.489Z,1520509745.489 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:49:05.868Z,1520509745.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:05.883Z,1520509745.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T11:49:05.884Z,1520509745.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:06.273Z,1520509746.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:06.289Z,1520509746.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T11:49:06.289Z,1520509746.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:06.677Z,1520509746.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:06.692Z,1520509746.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T11:49:06.693Z,1520509746.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:07.085Z,1520509747.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:07.114Z,1520509747.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T11:49:07.115Z,1520509747.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:07.467Z,1520509747.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:07.490Z,1520509747.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T11:49:07.491Z,1520509747.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:07.867Z,1520509747.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:07.882Z,1520509747.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T11:49:07.883Z,1520509747.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:08.272Z,1520509748.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:08.287Z,1520509748.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T11:49:08.287Z,1520509748.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:08.657Z,1520509748.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:08.685Z,1520509748.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T11:49:08.686Z,1520509748.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:09.077Z,1520509749.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:09.093Z,1520509749.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T11:49:09.094Z,1520509749.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:09.477Z,1520509749.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:09.492Z,1520509749.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T11:49:09.493Z,1520509749.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:09.868Z,1520509749.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:09.900Z,1520509749.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T11:49:09.909Z,1520509749.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:10.272Z,1520509750.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:10.287Z,1520509750.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T11:49:10.288Z,1520509750.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:10.675Z,1520509750.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:10.689Z,1520509750.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T11:49:10.690Z,1520509750.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:11.060Z,1520509751.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:11.090Z,1520509751.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T11:49:11.091Z,1520509751.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:11.471Z,1520509751.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:11.486Z,1520509751.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T11:49:11.487Z,1520509751.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:11.872Z,1520509751.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:11.887Z,1520509751.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T11:49:11.889Z,1520509751.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:12.281Z,1520509752.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:12.302Z,1520509752.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T11:49:12.303Z,1520509752.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:12.681Z,1520509752.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:12.696Z,1520509752.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T11:49:12.697Z,1520509752.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:13.081Z,1520509753.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:13.102Z,1520509753.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T11:49:13.103Z,1520509753.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:13.453Z,1520509753.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:13.479Z,1520509753.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T11:49:13.480Z,1520509753.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:13.863Z,1520509753.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:13.889Z,1520509753.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T11:49:13.890Z,1520509753.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:14.260Z,1520509754.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:14.287Z,1520509754.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T11:49:14.288Z,1520509754.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:14.659Z,1520509754.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:14.685Z,1520509754.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T11:49:14.686Z,1520509754.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:15.077Z,1520509755.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:15.093Z,1520509755.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T11:49:15.093Z,1520509755.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:15.486Z,1520509755.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:15.501Z,1520509755.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T11:49:15.502Z,1520509755.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:15.873Z,1520509755.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:15.895Z,1520509755.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T11:49:15.896Z,1520509755.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:16.263Z,1520509756.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:16.289Z,1520509756.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T11:49:16.290Z,1520509756.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:16.676Z,1520509756.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:16.691Z,1520509756.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T11:49:16.692Z,1520509756.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:19.798Z,1520509759.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:19.835Z,1520509759.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T11:49:19.836Z,1520509759.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:19.909Z,1520509759.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:19.946Z,1520509759.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-08T11:49:19.947Z,1520509759.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:20.305Z,1520509760.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:20.327Z,1520509760.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T11:49:20.328Z,1520509760.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:20.701Z,1520509760.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:20.731Z,1520509760.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T11:49:20.732Z,1520509760.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:21.105Z,1520509761.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:21.127Z,1520509761.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T11:49:21.128Z,1520509761.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:21.488Z,1520509761.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:21.510Z,1520509761.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T11:49:21.511Z,1520509761.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:21.889Z,1520509761.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:21.904Z,1520509761.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T11:49:21.905Z,1520509761.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:22.289Z,1520509762.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:22.305Z,1520509762.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T11:49:22.305Z,1520509762.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:22.692Z,1520509762.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:22.714Z,1520509762.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T11:49:22.715Z,1520509762.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:23.097Z,1520509763.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:23.112Z,1520509763.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T11:49:23.113Z,1520509763.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:23.497Z,1520509763.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:23.512Z,1520509763.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T11:49:23.513Z,1520509763.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:23.894Z,1520509763.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:23.909Z,1520509763.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T11:49:23.910Z,1520509763.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:24.293Z,1520509764.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:24.307Z,1520509764.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T11:49:24.308Z,1520509764.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:24.683Z,1520509764.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:24.719Z,1520509764.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:25.093Z,1520509765.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:25.109Z,1520509765.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:25.491Z,1520509765.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:25.507Z,1520509765.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:25.884Z,1520509765.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:25.911Z,1520509765.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:26.298Z,1520509766.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:26.314Z,1520509766.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:26.697Z,1520509766.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:26.713Z,1520509766.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:27.097Z,1520509767.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:27.113Z,1520509767.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:27.494Z,1520509767.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:27.509Z,1520509767.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:27.891Z,1520509767.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:27.914Z,1520509767.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:28.295Z,1520509768.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:28.314Z,1520509768.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:28.694Z,1520509768.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:28.714Z,1520509768.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:29.098Z,1520509769.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:29.113Z,1520509769.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:29.501Z,1520509769.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:29.517Z,1520509769.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:29.897Z,1520509769.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:29.913Z,1520509769.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:30.291Z,1520509770.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:30.306Z,1520509770.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:30.683Z,1520509770.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:30.715Z,1520509770.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:31.094Z,1520509771.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:31.110Z,1520509771.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:31.492Z,1520509771.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:31.507Z,1520509771.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:31.883Z,1520509771.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:31.911Z,1520509771.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:32.300Z,1520509772.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:32.322Z,1520509772.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:32.700Z,1520509772.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:32.715Z,1520509772.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:33.096Z,1520509773.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:33.113Z,1520509773.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:33.491Z,1520509773.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:33.506Z,1520509773.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:33.892Z,1520509773.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:33.907Z,1520509773.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:34.295Z,1520509774.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:34.311Z,1520509774.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:34.691Z,1520509774.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:34.706Z,1520509774.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:35.100Z,1520509775.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:35.116Z,1520509775.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:35.501Z,1520509775.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:35.517Z,1520509775.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:35.901Z,1520509775.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:35.916Z,1520509775.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:36.291Z,1520509776.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:36.306Z,1520509776.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:36.684Z,1520509776.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:36.715Z,1520509776.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:37.094Z,1520509777.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:37.114Z,1520509777.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:37.496Z,1520509777.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:37.511Z,1520509777.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:37.876Z,1520509777.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:37.908Z,1520509777.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:38.305Z,1520509778.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:38.320Z,1520509778.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:38.705Z,1520509778.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:38.720Z,1520509778.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:39.101Z,1520509779.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:39.122Z,1520509779.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:39.495Z,1520509779.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:39.515Z,1520509779.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:39.891Z,1520509779.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:39.906Z,1520509779.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:40.296Z,1520509780.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:40.318Z,1520509780.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:40.696Z,1520509780.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:40.718Z,1520509780.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:41.105Z,1520509781.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:41.120Z,1520509781.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:41.504Z,1520509781.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:41.519Z,1520509781.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:41.904Z,1520509781.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:41.919Z,1520509781.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:42.291Z,1520509782.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:42.306Z,1520509782.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:42.680Z,1520509782.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:42.711Z,1520509782.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:43.091Z,1520509783.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:43.111Z,1520509783.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:43.497Z,1520509783.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:43.512Z,1520509783.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:43.880Z,1520509783.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:43.915Z,1520509783.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:44.305Z,1520509784.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:44.321Z,1520509784.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:44.703Z,1520509784.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:44.726Z,1520509784.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:45.093Z,1520509785.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:45.125Z,1520509785.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:45.491Z,1520509785.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:45.506Z,1520509785.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:45.890Z,1520509785.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:45.905Z,1520509785.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:46.291Z,1520509786.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:46.307Z,1520509786.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:46.690Z,1520509786.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:46.705Z,1520509786.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:47.105Z,1520509787.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:47.128Z,1520509787.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:47.506Z,1520509787.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:47.529Z,1520509787.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:47.897Z,1520509787.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:47.925Z,1520509787.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:48.288Z,1520509788.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:48.303Z,1520509788.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:48.686Z,1520509788.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:48.706Z,1520509788.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:49.095Z,1520509789.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:49.114Z,1520509789.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:49.493Z,1520509789.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:49.508Z,1520509789.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:49.885Z,1520509789.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:49.908Z,1520509789.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:50.305Z,1520509790.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:50.337Z,1520509790.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:50.698Z,1520509790.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:50.713Z,1520509790.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:51.097Z,1520509791.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:51.112Z,1520509791.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:51.491Z,1520509791.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:51.514Z,1520509791.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:51.894Z,1520509791.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:51.910Z,1520509791.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:52.295Z,1520509792.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:52.311Z,1520509792.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:52.694Z,1520509792.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:52.711Z,1520509792.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:53.097Z,1520509793.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:53.113Z,1520509793.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:53.501Z,1520509793.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:53.517Z,1520509793.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:53.897Z,1520509793.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:53.913Z,1520509793.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:54.292Z,1520509794.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:54.306Z,1520509794.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:54.683Z,1520509794.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:54.711Z,1520509794.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:55.095Z,1520509795.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:55.114Z,1520509795.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:55.492Z,1520509795.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:55.507Z,1520509795.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:55.880Z,1520509795.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:55.910Z,1520509795.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:56.304Z,1520509796.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:56.320Z,1520509796.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:56.704Z,1520509796.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:56.719Z,1520509796.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:57.102Z,1520509797.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:57.117Z,1520509797.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:57.489Z,1520509797.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:57.509Z,1520509797.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:57.892Z,1520509797.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:57.907Z,1520509797.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:58.296Z,1520509798.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:58.311Z,1520509798.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:58.690Z,1520509798.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:58.710Z,1520509798.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:59.104Z,1520509799.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:59.120Z,1520509799.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:59.505Z,1520509799.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:59.520Z,1520509799.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:49:59.905Z,1520509799.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:49:59.920Z,1520509799.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:00.292Z,1520509800.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:00.307Z,1520509800.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:00.680Z,1520509800.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:00.712Z,1520509800.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:01.095Z,1520509801.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:01.111Z,1520509801.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:01.484Z,1520509801.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:01.511Z,1520509801.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:01.881Z,1520509801.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:01.920Z,1520509801.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:02.305Z,1520509802.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:02.326Z,1520509802.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:02.709Z,1520509802.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:02.724Z,1520509802.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:03.097Z,1520509803.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:03.122Z,1520509803.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:03.495Z,1520509803.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:03.511Z,1520509803.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:03.883Z,1520509803.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:03.919Z,1520509803.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:04.296Z,1520509804.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:04.312Z,1520509804.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:04.682Z,1520509804.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:04.718Z,1520509804.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:05.109Z,1520509805.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:05.124Z,1520509805.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:05.508Z,1520509805.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:05.524Z,1520509805.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:05.905Z,1520509805.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:05.927Z,1520509805.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:06.283Z,1520509806.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:06.309Z,1520509806.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:06.677Z,1520509806.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:06.700Z,1520509806.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:07.082Z,1520509807.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:07.114Z,1520509807.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:07.483Z,1520509807.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:07.510Z,1520509807.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:07.880Z,1520509807.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:07.915Z,1520509807.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:08.301Z,1520509808.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:08.317Z,1520509808.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:08.703Z,1520509808.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:08.739Z,1520509808.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:09.093Z,1520509809.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:09.126Z,1520509809.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:09.490Z,1520509809.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:09.517Z,1520509809.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:09.883Z,1520509809.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:09.919Z,1520509809.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:10.287Z,1520509810.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:10.318Z,1520509810.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:10.683Z,1520509810.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:10.718Z,1520509810.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:11.107Z,1520509811.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:11.122Z,1520509811.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:11.510Z,1520509811.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:11.525Z,1520509811.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:11.893Z,1520509811.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:11.931Z,1520509811.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:12.288Z,1520509812.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:12.321Z,1520509812.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:12.679Z,1520509812.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:12.699Z,1520509812.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:13.092Z,1520509813.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:13.107Z,1520509813.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:13.488Z,1520509813.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:13.504Z,1520509813.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:13.880Z,1520509813.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:13.908Z,1520509813.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:14.305Z,1520509814.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:14.337Z,1520509814.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:14.701Z,1520509814.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:14.716Z,1520509814.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:15.096Z,1520509815.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:15.118Z,1520509815.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:15.492Z,1520509815.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:15.507Z,1520509815.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:15.891Z,1520509815.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:15.906Z,1520509815.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:16.291Z,1520509816.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:16.311Z,1520509816.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:16.691Z,1520509816.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:16.706Z,1520509816.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:19.810Z,1520509819.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:19.847Z,1520509819.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:19.934Z,1520509819.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:19.959Z,1520509819.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:20.314Z,1520509820.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:20.344Z,1520509820.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:20.703Z,1520509820.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:20.717Z,1520509820.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:21.099Z,1520509821.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:21.118Z,1520509821.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:21.502Z,1520509821.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:21.522Z,1520509821.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:21.903Z,1520509821.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:21.918Z,1520509821.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:22.305Z,1520509822.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:22.322Z,1520509822.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:22.713Z,1520509822.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:22.728Z,1520509822.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:23.116Z,1520509823.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:23.131Z,1520509823.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:23.500Z,1520509823.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:23.515Z,1520509823.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:23.904Z,1520509823.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:23.919Z,1520509823.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:24.304Z,1520509824.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:24.326Z,1520509824.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:24.692Z,1520509824.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:24.715Z,1520509824.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:25.117Z,1520509825.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:25.149Z,1520509825.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:25.513Z,1520509825.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:25.528Z,1520509825.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:25.905Z,1520509825.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:25.933Z,1520509825.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:26.307Z,1520509826.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:26.326Z,1520509826.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:26.709Z,1520509826.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:26.724Z,1520509826.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:27.095Z,1520509827.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:27.131Z,1520509827.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:27.506Z,1520509827.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:27.522Z,1520509827.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:27.913Z,1520509827.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:27.928Z,1520509827.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:28.317Z,1520509828.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:28.338Z,1520509828.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:28.717Z,1520509828.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:28.738Z,1520509828.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:29.122Z,1520509829.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:29.137Z,1520509829.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:29.507Z,1520509829.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:29.523Z,1520509829.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:29.896Z,1520509829.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:29.927Z,1520509829.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:30.309Z,1520509830.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:30.325Z,1520509830.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:30.691Z,1520509830.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:30.727Z,1520509830.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:31.114Z,1520509831.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:31.129Z,1520509831.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:31.521Z,1520509831.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:31.537Z,1520509831.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:31.918Z,1520509831.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:31.933Z,1520509831.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:32.294Z,1520509832.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:32.321Z,1520509832.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:32.695Z,1520509832.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:32.722Z,1520509832.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:33.091Z,1520509833.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:33.117Z,1520509833.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:33.495Z,1520509833.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:33.529Z,1520509833.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:33.895Z,1520509833.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:33.931Z,1520509833.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:34.317Z,1520509834.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:34.333Z,1520509834.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:34.721Z,1520509834.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:34.736Z,1520509834.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:35.118Z,1520509835.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:35.133Z,1520509835.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:35.491Z,1520509835.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:35.522Z,1520509835.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:35.895Z,1520509835.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:35.921Z,1520509835.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:36.296Z,1520509836.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:36.323Z,1520509836.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:36.691Z,1520509836.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:36.727Z,1520509836.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:37.109Z,1520509837.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:37.131Z,1520509837.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:37.522Z,1520509837.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:37.537Z,1520509837.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:37.913Z,1520509837.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:37.929Z,1520509837.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:38.295Z,1520509838.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:38.321Z,1520509838.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:38.695Z,1520509838.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:38.727Z,1520509838.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:39.099Z,1520509839.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:39.125Z,1520509839.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:39.495Z,1520509839.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:39.531Z,1520509839.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:39.895Z,1520509839.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:39.927Z,1520509839.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:40.318Z,1520509840.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:40.334Z,1520509840.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:40.727Z,1520509840.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:40.742Z,1520509840.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:41.122Z,1520509841.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:41.138Z,1520509841.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:41.496Z,1520509841.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:41.527Z,1520509841.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:41.895Z,1520509841.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:41.911Z,1520509841.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:42.300Z,1520509842.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:42.316Z,1520509842.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:42.703Z,1520509842.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:42.719Z,1520509842.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:43.114Z,1520509843.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:43.145Z,1520509843.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:43.518Z,1520509843.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:43.545Z,1520509843.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:43.914Z,1520509843.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:43.945Z,1520509843.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:44.300Z,1520509844.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:44.316Z,1520509844.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:44.697Z,1520509844.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:44.715Z,1520509844.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:45.100Z,1520509845.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:45.120Z,1520509845.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:45.504Z,1520509845.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:45.520Z,1520509845.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:45.900Z,1520509845.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:45.915Z,1520509845.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:46.317Z,1520509846.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:46.348Z,1520509846.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:46.717Z,1520509846.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:46.749Z,1520509846.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:47.113Z,1520509847.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:47.144Z,1520509847.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:47.504Z,1520509847.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:47.526Z,1520509847.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:47.904Z,1520509847.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:47.919Z,1520509847.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:48.304Z,1520509848.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:48.319Z,1520509848.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:48.702Z,1520509848.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:48.717Z,1520509848.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:49.117Z,1520509849.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:49.153Z,1520509849.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:49.513Z,1520509849.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:49.528Z,1520509849.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:49.909Z,1520509849.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:49.925Z,1520509849.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:50.299Z,1520509850.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:50.319Z,1520509850.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:50.707Z,1520509850.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:50.722Z,1520509850.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:51.107Z,1520509851.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:51.126Z,1520509851.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:51.503Z,1520509851.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:51.526Z,1520509851.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:51.907Z,1520509851.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:51.922Z,1520509851.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:52.316Z,1520509852.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:52.332Z,1520509852.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:52.716Z,1520509852.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:52.731Z,1520509852.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:53.117Z,1520509853.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:53.132Z,1520509853.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:53.503Z,1520509853.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:53.522Z,1520509853.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:53.903Z,1520509853.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:53.922Z,1520509853.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:54.304Z,1520509854.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:54.319Z,1520509854.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:54.706Z,1520509854.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:54.726Z,1520509854.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:55.117Z,1520509855.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:55.133Z,1520509855.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:55.520Z,1520509855.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:55.535Z,1520509855.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:55.913Z,1520509855.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:55.929Z,1520509855.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:56.295Z,1520509856.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:56.334Z,1520509856.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:56.708Z,1520509856.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:56.722Z,1520509856.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:57.107Z,1520509857.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:57.126Z,1520509857.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:57.495Z,1520509857.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:57.530Z,1520509857.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:57.909Z,1520509857.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:57.924Z,1520509857.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:58.317Z,1520509858.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:58.335Z,1520509858.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:58.720Z,1520509858.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:58.735Z,1520509858.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:59.118Z,1520509859.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:59.133Z,1520509859.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:59.506Z,1520509859.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:59.526Z,1520509859.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:50:59.894Z,1520509859.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:50:59.926Z,1520509859.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:00.308Z,1520509860.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:00.323Z,1520509860.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:00.707Z,1520509860.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:00.726Z,1520509860.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:01.117Z,1520509861.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:01.138Z,1520509861.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:01.520Z,1520509861.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:01.535Z,1520509861.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:01.917Z,1520509861.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:01.933Z,1520509861.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:02.294Z,1520509862.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:02.331Z,1520509862.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:02.699Z,1520509862.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:02.727Z,1520509862.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:03.099Z,1520509863.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:03.125Z,1520509863.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:03.495Z,1520509863.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:03.521Z,1520509863.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:03.890Z,1520509863.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:03.923Z,1520509863.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:04.317Z,1520509864.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:04.333Z,1520509864.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:04.718Z,1520509864.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:04.738Z,1520509864.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:05.115Z,1520509865.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:05.140Z,1520509865.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:05.495Z,1520509865.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:05.522Z,1520509865.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:05.895Z,1520509865.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:05.921Z,1520509865.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:06.295Z,1520509866.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:06.322Z,1520509866.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:06.723Z,1520509866.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:06.751Z,1520509866.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:07.107Z,1520509867.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:07.146Z,1520509867.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:07.525Z,1520509867.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:07.540Z,1520509867.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:07.914Z,1520509867.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:07.942Z,1520509867.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:08.300Z,1520509868.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:08.316Z,1520509868.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:08.711Z,1520509868.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:08.742Z,1520509868.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:09.103Z,1520509869.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:09.119Z,1520509869.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:09.504Z,1520509869.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:09.520Z,1520509869.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:09.903Z,1520509869.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:09.919Z,1520509869.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:10.317Z,1520509870.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:10.347Z,1520509870.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:10.713Z,1520509870.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:10.741Z,1520509870.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:11.117Z,1520509871.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:11.132Z,1520509871.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:11.504Z,1520509871.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:11.519Z,1520509871.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:11.902Z,1520509871.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:11.917Z,1520509871.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:12.305Z,1520509872.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:12.319Z,1520509872.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:12.704Z,1520509872.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:12.719Z,1520509872.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:13.105Z,1520509873.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:13.121Z,1520509873.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:13.517Z,1520509873.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:13.555Z,1520509873.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:13.917Z,1520509873.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:13.949Z,1520509873.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:14.305Z,1520509874.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:14.326Z,1520509874.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:14.706Z,1520509874.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:14.721Z,1520509874.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:15.106Z,1520509875.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:15.121Z,1520509875.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:15.503Z,1520509875.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:15.519Z,1520509875.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:15.906Z,1520509875.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:15.921Z,1520509875.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:16.310Z,1520509876.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:16.326Z,1520509876.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:16.713Z,1520509876.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:16.729Z,1520509876.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:19.824Z,1520509879.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:19.858Z,1520509879.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:19.941Z,1520509879.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:19.982Z,1520509879.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:20.311Z,1520509880.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:20.331Z,1520509880.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:20.713Z,1520509880.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:20.728Z,1520509880.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:21.113Z,1520509881.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:21.128Z,1520509881.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:21.510Z,1520509881.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:21.529Z,1520509881.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:21.912Z,1520509881.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:21.927Z,1520509881.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:22.314Z,1520509882.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:22.330Z,1520509882.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:22.718Z,1520509882.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:22.738Z,1520509882.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:23.119Z,1520509883.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:23.134Z,1520509883.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:23.513Z,1520509883.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:23.534Z,1520509883.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:23.913Z,1520509883.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:23.929Z,1520509883.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:24.312Z,1520509884.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:24.328Z,1520509884.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:24.699Z,1520509884.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:24.735Z,1520509884.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:25.121Z,1520509885.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:25.142Z,1520509885.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:25.521Z,1520509885.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:25.537Z,1520509885.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:25.921Z,1520509885.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:25.939Z,1520509885.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:26.304Z,1520509886.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:26.319Z,1520509886.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:26.714Z,1520509886.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:26.738Z,1520509886.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:27.105Z,1520509887.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:27.137Z,1520509887.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:27.515Z,1520509887.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:27.531Z,1520509887.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:27.917Z,1520509887.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:27.931Z,1520509887.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:28.325Z,1520509888.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:28.340Z,1520509888.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:28.724Z,1520509888.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:28.740Z,1520509888.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:29.125Z,1520509889.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:29.146Z,1520509889.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:29.500Z,1520509889.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:29.526Z,1520509889.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:29.910Z,1520509889.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:29.934Z,1520509889.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:30.316Z,1520509890.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:30.331Z,1520509890.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:30.709Z,1520509890.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:30.728Z,1520509890.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:31.121Z,1520509891.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:31.142Z,1520509891.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:31.524Z,1520509891.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:31.539Z,1520509891.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:31.921Z,1520509891.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:31.943Z,1520509891.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:32.314Z,1520509892.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:32.334Z,1520509892.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:32.713Z,1520509892.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:32.728Z,1520509892.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:33.100Z,1520509893.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:33.135Z,1520509893.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:33.516Z,1520509893.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:33.531Z,1520509893.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:33.915Z,1520509893.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:33.930Z,1520509893.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:34.324Z,1520509894.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:34.340Z,1520509894.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:34.725Z,1520509894.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:34.740Z,1520509894.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:35.125Z,1520509895.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:35.140Z,1520509895.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:35.515Z,1520509895.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:35.531Z,1520509895.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:35.910Z,1520509895.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:35.931Z,1520509895.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:36.299Z,1520509896.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:36.326Z,1520509896.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:36.700Z,1520509896.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:36.730Z,1520509896.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:37.121Z,1520509897.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:37.136Z,1520509897.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:37.525Z,1520509897.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:37.540Z,1520509897.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:37.913Z,1520509897.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:37.941Z,1520509897.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:38.314Z,1520509898.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:38.330Z,1520509898.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:38.703Z,1520509898.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:38.737Z,1520509898.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:39.100Z,1520509899.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:39.134Z,1520509899.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:39.503Z,1520509899.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:39.535Z,1520509899.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:39.915Z,1520509899.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:39.930Z,1520509899.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:40.326Z,1520509900.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:40.341Z,1520509900.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:40.725Z,1520509900.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:40.740Z,1520509900.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:41.120Z,1520509901.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:41.135Z,1520509901.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:41.503Z,1520509901.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:41.535Z,1520509901.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:41.902Z,1520509901.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:41.938Z,1520509901.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:42.304Z,1520509902.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:42.339Z,1520509902.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:42.700Z,1520509902.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:42.732Z,1520509902.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:43.126Z,1520509903.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:43.141Z,1520509903.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:43.513Z,1520509903.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:43.539Z,1520509903.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:43.913Z,1520509903.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:43.943Z,1520509903.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:44.303Z,1520509904.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:44.335Z,1520509904.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:44.703Z,1520509904.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:44.717Z,1520509904.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:45.100Z,1520509905.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:45.116Z,1520509905.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:45.511Z,1520509905.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:45.543Z,1520509905.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:45.569Z,1520509905.569 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T11:51:45.906Z,1520509905.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:45.921Z,1520509905.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:46.313Z,1520509906.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:46.349Z,1520509906.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:46.721Z,1520509906.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:46.743Z,1520509906.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:47.124Z,1520509907.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:47.149Z,1520509907.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:47.504Z,1520509907.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:47.520Z,1520509907.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:47.911Z,1520509907.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:47.947Z,1520509907.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:48.312Z,1520509908.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:48.327Z,1520509908.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:48.703Z,1520509908.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:48.719Z,1520509908.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:49.122Z,1520509909.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:49.153Z,1520509909.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:49.525Z,1520509909.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:49.550Z,1520509909.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:49.909Z,1520509909.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:49.925Z,1520509909.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:50.310Z,1520509910.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:50.331Z,1520509910.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:50.711Z,1520509910.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:50.726Z,1520509910.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:51.100Z,1520509911.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:51.133Z,1520509911.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:51.513Z,1520509911.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:51.528Z,1520509911.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:51.911Z,1520509911.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:51.926Z,1520509911.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:52.314Z,1520509912.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:52.329Z,1520509912.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:52.725Z,1520509912.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:52.757Z,1520509912.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:53.117Z,1520509913.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:53.134Z,1520509913.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:53.514Z,1520509913.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:53.529Z,1520509913.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:53.911Z,1520509913.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:53.927Z,1520509913.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:54.315Z,1520509914.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:54.330Z,1520509914.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:54.699Z,1520509914.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:54.735Z,1520509914.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:55.120Z,1520509915.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:55.142Z,1520509915.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:55.520Z,1520509915.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:55.535Z,1520509915.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:55.921Z,1520509915.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:55.937Z,1520509915.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:56.323Z,1520509916.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:56.338Z,1520509916.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:56.716Z,1520509916.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:56.731Z,1520509916.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:57.100Z,1520509917.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:57.129Z,1520509917.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:57.512Z,1520509917.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:57.527Z,1520509917.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:57.898Z,1520509917.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:57.933Z,1520509917.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:58.326Z,1520509918.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:58.346Z,1520509918.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:58.725Z,1520509918.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:58.740Z,1520509918.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:59.125Z,1520509919.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:59.140Z,1520509919.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:59.516Z,1520509919.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:59.538Z,1520509919.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:51:59.915Z,1520509919.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:51:59.934Z,1520509919.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:00.317Z,1520509920.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:00.332Z,1520509920.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:00.697Z,1520509920.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:00.735Z,1520509920.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:01.125Z,1520509921.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:01.140Z,1520509921.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:01.525Z,1520509921.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:01.540Z,1520509921.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:01.918Z,1520509921.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:01.946Z,1520509921.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:02.316Z,1520509922.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:02.331Z,1520509922.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:02.716Z,1520509922.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:02.732Z,1520509922.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:03.100Z,1520509923.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:03.137Z,1520509923.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:03.504Z,1520509923.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:03.531Z,1520509923.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:03.915Z,1520509923.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:03.931Z,1520509923.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:04.326Z,1520509924.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:04.346Z,1520509924.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:04.728Z,1520509924.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:04.743Z,1520509924.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:05.126Z,1520509925.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:05.141Z,1520509925.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:05.516Z,1520509925.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:05.531Z,1520509925.531 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:05.531Z,1520509925.531 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83
2018-03-08T11:52:05.531Z,1520509925.531 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T11:52:05.534Z,1520509925.534 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:05.534Z,1520509925.534 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83
2018-03-08T11:52:05.534Z,1520509925.534 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T11:52:05.536Z,1520509925.536 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:05.536Z,1520509925.536 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 83
2018-03-08T11:52:05.536Z,1520509925.536 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T11:52:05.548Z,1520509925.548 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T11:52:05.549Z,1520509925.549 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T11:52:05.549Z,1520509925.549 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T11:52:05.923Z,1520509925.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:05.949Z,1520509925.949 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T11:52:05.949Z,1520509925.949 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83
2018-03-08T11:52:05.950Z,1520509925.950 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T11:52:05.950Z,1520509925.950 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83
2018-03-08T11:52:05.950Z,1520509925.950 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T11:52:05.950Z,1520509925.950 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 83
2018-03-08T11:52:06.303Z,1520509926.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:06.333Z,1520509926.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T11:52:06.334Z,1520509926.334 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:52:06.334Z,1520509926.334 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:52:06.334Z,1520509926.334 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T11:52:06.335Z,1520509926.335 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:52:06.335Z,1520509926.335 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:52:06.335Z,1520509926.335 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T11:52:06.336Z,1520509926.336 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:52:06.336Z,1520509926.336 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:52:06.699Z,1520509926.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:06.734Z,1520509926.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T11:52:06.735Z,1520509926.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:07.121Z,1520509927.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:07.136Z,1520509927.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T11:52:07.137Z,1520509927.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:07.525Z,1520509927.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:07.549Z,1520509927.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T11:52:07.550Z,1520509927.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:07.921Z,1520509927.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:07.936Z,1520509927.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T11:52:07.937Z,1520509927.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:08.302Z,1520509928.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:08.334Z,1520509928.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T11:52:08.335Z,1520509928.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:08.706Z,1520509928.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:08.731Z,1520509928.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T11:52:08.732Z,1520509928.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:09.096Z,1520509929.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:09.111Z,1520509929.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T11:52:09.125Z,1520509929.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:09.507Z,1520509929.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:09.538Z,1520509929.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T11:52:09.539Z,1520509929.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:09.907Z,1520509929.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:09.938Z,1520509929.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T11:52:09.938Z,1520509929.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:10.326Z,1520509930.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:10.346Z,1520509930.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T11:52:10.347Z,1520509930.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:10.721Z,1520509930.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:10.743Z,1520509930.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T11:52:10.744Z,1520509930.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:11.116Z,1520509931.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:11.142Z,1520509931.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T11:52:11.143Z,1520509931.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:11.507Z,1520509931.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:11.538Z,1520509931.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T11:52:11.539Z,1520509931.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:11.903Z,1520509931.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:11.938Z,1520509931.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T11:52:11.939Z,1520509931.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:12.303Z,1520509932.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:12.338Z,1520509932.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T11:52:12.339Z,1520509932.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:12.703Z,1520509932.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:12.719Z,1520509932.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T11:52:12.719Z,1520509932.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:13.121Z,1520509933.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:13.145Z,1520509933.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T11:52:13.146Z,1520509933.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:13.521Z,1520509933.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:13.544Z,1520509933.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T11:52:13.545Z,1520509933.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:13.917Z,1520509933.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:13.948Z,1520509933.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T11:52:13.950Z,1520509933.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:14.308Z,1520509934.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:14.323Z,1520509934.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T11:52:14.323Z,1520509934.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:14.710Z,1520509934.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:14.725Z,1520509934.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T11:52:14.726Z,1520509934.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:15.106Z,1520509935.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:15.134Z,1520509935.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T11:52:15.135Z,1520509935.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:15.512Z,1520509935.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:15.527Z,1520509935.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T11:52:15.528Z,1520509935.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:15.911Z,1520509935.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:15.926Z,1520509935.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T11:52:15.927Z,1520509935.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:16.325Z,1520509936.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:16.340Z,1520509936.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T11:52:16.358Z,1520509936.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:16.721Z,1520509936.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:16.736Z,1520509936.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T11:52:16.737Z,1520509936.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:19.833Z,1520509939.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:19.864Z,1520509939.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2018-03-08T11:52:19.865Z,1520509939.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:19.944Z,1520509939.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:19.986Z,1520509939.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-08T11:52:19.987Z,1520509939.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:20.332Z,1520509940.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:20.437Z,1520509940.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T11:52:20.438Z,1520509940.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:20.737Z,1520509940.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:20.771Z,1520509940.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T11:52:20.772Z,1520509940.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:21.120Z,1520509941.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:21.135Z,1520509941.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T11:52:21.137Z,1520509941.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:21.517Z,1520509941.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:21.533Z,1520509941.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T11:52:21.533Z,1520509941.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:21.929Z,1520509941.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:21.960Z,1520509941.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T11:52:21.961Z,1520509941.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:22.329Z,1520509942.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:22.362Z,1520509942.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T11:52:22.363Z,1520509942.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:22.725Z,1520509942.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:22.740Z,1520509942.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T11:52:22.741Z,1520509942.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:23.118Z,1520509943.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:23.137Z,1520509943.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T11:52:23.138Z,1520509943.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:23.520Z,1520509943.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:23.535Z,1520509943.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T11:52:23.536Z,1520509943.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:23.934Z,1520509943.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:23.963Z,1520509943.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T11:52:23.964Z,1520509943.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:24.325Z,1520509944.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:24.340Z,1520509944.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T11:52:24.341Z,1520509944.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:24.733Z,1520509944.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:24.763Z,1520509944.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T11:52:24.764Z,1520509944.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:25.118Z,1520509945.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:25.150Z,1520509945.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T11:52:25.151Z,1520509945.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:25.520Z,1520509945.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:25.536Z,1520509945.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:25.921Z,1520509945.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:25.937Z,1520509945.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:26.333Z,1520509946.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:26.364Z,1520509946.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:26.725Z,1520509946.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:26.741Z,1520509946.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:27.110Z,1520509947.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:27.142Z,1520509947.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:27.521Z,1520509947.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:27.537Z,1520509947.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:27.921Z,1520509947.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:27.936Z,1520509947.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:28.334Z,1520509948.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:28.367Z,1520509948.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:28.734Z,1520509948.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:28.767Z,1520509948.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:29.126Z,1520509949.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:29.141Z,1520509949.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:29.520Z,1520509949.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:29.536Z,1520509949.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:29.920Z,1520509949.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:29.939Z,1520509949.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:30.318Z,1520509950.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:30.338Z,1520509950.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:30.718Z,1520509950.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:30.734Z,1520509950.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:31.133Z,1520509951.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:31.165Z,1520509951.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:31.529Z,1520509951.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:31.545Z,1520509951.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:31.925Z,1520509951.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:31.941Z,1520509951.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:32.318Z,1520509952.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:32.334Z,1520509952.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:32.723Z,1520509952.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:32.739Z,1520509952.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:33.118Z,1520509953.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:33.137Z,1520509953.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:33.518Z,1520509953.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:33.538Z,1520509953.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:33.929Z,1520509953.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:33.945Z,1520509953.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:34.329Z,1520509954.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:34.345Z,1520509954.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:34.725Z,1520509954.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:34.740Z,1520509954.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:35.123Z,1520509955.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:35.139Z,1520509955.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:35.516Z,1520509955.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:35.532Z,1520509955.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:35.920Z,1520509955.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:35.935Z,1520509955.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:36.329Z,1520509956.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:36.345Z,1520509956.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:36.729Z,1520509956.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:36.745Z,1520509956.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:37.125Z,1520509957.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:37.141Z,1520509957.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:37.520Z,1520509957.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:37.536Z,1520509957.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:37.923Z,1520509957.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:37.939Z,1520509957.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:38.315Z,1520509958.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:38.343Z,1520509958.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:38.725Z,1520509958.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:38.741Z,1520509958.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:39.131Z,1520509959.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:39.146Z,1520509959.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:39.534Z,1520509959.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:39.555Z,1520509959.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:39.934Z,1520509959.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:39.949Z,1520509959.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:40.323Z,1520509960.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:40.340Z,1520509960.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:40.719Z,1520509960.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:40.736Z,1520509960.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:41.121Z,1520509961.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:41.137Z,1520509961.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:41.507Z,1520509961.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:41.534Z,1520509961.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:41.921Z,1520509961.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:41.957Z,1520509961.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:42.333Z,1520509962.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:42.360Z,1520509962.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:42.733Z,1520509962.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:42.763Z,1520509962.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:43.117Z,1520509963.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:43.132Z,1520509963.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:43.512Z,1520509963.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:43.527Z,1520509963.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:43.919Z,1520509963.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:43.938Z,1520509963.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:44.334Z,1520509964.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:44.383Z,1520509964.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:44.729Z,1520509964.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:44.744Z,1520509964.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:45.134Z,1520509965.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:45.163Z,1520509965.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:45.518Z,1520509965.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:45.533Z,1520509965.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:45.920Z,1520509965.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:45.935Z,1520509965.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:46.316Z,1520509966.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:46.331Z,1520509966.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:46.718Z,1520509966.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:46.733Z,1520509966.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:47.133Z,1520509967.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:47.165Z,1520509967.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:47.533Z,1520509967.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:47.564Z,1520509967.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:47.925Z,1520509967.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:47.941Z,1520509967.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:48.318Z,1520509968.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:48.333Z,1520509968.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:48.716Z,1520509968.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:48.739Z,1520509968.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:49.120Z,1520509969.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:49.135Z,1520509969.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:49.520Z,1520509969.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:49.535Z,1520509969.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:49.918Z,1520509969.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:49.942Z,1520509969.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:50.333Z,1520509970.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:50.369Z,1520509970.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:50.728Z,1520509970.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:50.743Z,1520509970.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:51.124Z,1520509971.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:51.139Z,1520509971.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:51.519Z,1520509971.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:51.534Z,1520509971.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:51.915Z,1520509971.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:51.930Z,1520509971.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:52.315Z,1520509972.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:52.331Z,1520509972.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:52.718Z,1520509972.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:52.741Z,1520509972.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:53.128Z,1520509973.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:53.144Z,1520509973.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:53.529Z,1520509973.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:53.545Z,1520509973.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:53.928Z,1520509973.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:53.950Z,1520509973.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:54.323Z,1520509974.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:54.338Z,1520509974.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:54.724Z,1520509974.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:54.739Z,1520509974.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:55.119Z,1520509975.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:55.134Z,1520509975.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:55.520Z,1520509975.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:55.535Z,1520509975.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:55.923Z,1520509975.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:55.942Z,1520509975.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:56.329Z,1520509976.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:56.350Z,1520509976.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:56.733Z,1520509976.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:56.748Z,1520509976.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:57.133Z,1520509977.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:57.148Z,1520509977.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:57.523Z,1520509977.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:57.542Z,1520509977.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:57.907Z,1520509977.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:57.933Z,1520509977.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:58.321Z,1520509978.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:58.336Z,1520509978.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:58.719Z,1520509978.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:58.738Z,1520509978.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:59.132Z,1520509979.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:59.148Z,1520509979.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:59.532Z,1520509979.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:59.548Z,1520509979.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:52:59.932Z,1520509979.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:52:59.948Z,1520509979.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:00.324Z,1520509980.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:00.339Z,1520509980.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:00.723Z,1520509980.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:00.743Z,1520509980.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:01.117Z,1520509981.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:01.138Z,1520509981.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:01.507Z,1520509981.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:01.541Z,1520509981.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:01.932Z,1520509981.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:01.948Z,1520509981.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:02.332Z,1520509982.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:02.347Z,1520509982.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:02.733Z,1520509982.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:02.754Z,1520509982.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:03.121Z,1520509983.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:03.137Z,1520509983.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:03.519Z,1520509983.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:03.538Z,1520509983.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:03.930Z,1520509983.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:03.945Z,1520509983.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:04.333Z,1520509984.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:04.348Z,1520509984.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:04.733Z,1520509984.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:04.748Z,1520509984.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:05.125Z,1520509985.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:05.140Z,1520509985.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:05.520Z,1520509985.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:05.535Z,1520509985.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:05.929Z,1520509985.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:05.950Z,1520509985.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:06.333Z,1520509986.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:06.348Z,1520509986.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:06.733Z,1520509986.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:06.748Z,1520509986.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:07.124Z,1520509987.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:07.139Z,1520509987.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:07.507Z,1520509987.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:07.543Z,1520509987.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:07.908Z,1520509987.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:07.936Z,1520509987.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:08.329Z,1520509988.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:08.345Z,1520509988.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:08.733Z,1520509988.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:08.748Z,1520509988.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:09.133Z,1520509989.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:09.149Z,1520509989.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:09.522Z,1520509989.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:09.543Z,1520509989.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:09.907Z,1520509989.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:09.934Z,1520509989.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:10.324Z,1520509990.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:10.339Z,1520509990.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:10.715Z,1520509990.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:10.737Z,1520509990.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:11.130Z,1520509991.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:11.150Z,1520509991.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:11.532Z,1520509991.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:11.547Z,1520509991.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:11.933Z,1520509991.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:11.948Z,1520509991.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:12.323Z,1520509992.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:12.338Z,1520509992.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:12.723Z,1520509992.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:12.742Z,1520509992.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:13.119Z,1520509993.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:13.142Z,1520509993.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:13.523Z,1520509993.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:13.538Z,1520509993.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:13.933Z,1520509993.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:13.955Z,1520509993.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:14.332Z,1520509994.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:14.348Z,1520509994.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:14.734Z,1520509994.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:14.754Z,1520509994.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:15.120Z,1520509995.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:15.136Z,1520509995.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:15.513Z,1520509995.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:15.537Z,1520509995.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:15.922Z,1520509995.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:15.937Z,1520509995.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:16.332Z,1520509996.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:16.348Z,1520509996.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:16.351Z,1520509996.351 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T11:48:16.3Z
2018-03-08T11:53:16.351Z,1520509996.351 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T11:53:16.351Z,1520509996.351 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T11:53:16.733Z,1520509996.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:16.748Z,1520509996.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:19.950Z,1520509999.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:19.983Z,1520509999.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:20.060Z,1520510000.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:20.093Z,1520510000.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:20.432Z,1520510000.432 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0096.lzma
2018-03-08T11:53:20.456Z,1520510000.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:20.488Z,1520510000.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:20.857Z,1520510000.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:20.872Z,1520510000.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:21.235Z,1520510001.235 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0096.lzma.bak
2018-03-08T11:53:21.235Z,1520510001.235 [DataOverHttps](INFO): SBD MOMSN=7985416
2018-03-08T11:53:21.259Z,1520510001.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:21.290Z,1520510001.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:21.833Z,1520510001.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:21.848Z,1520510001.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:22.064Z,1520510002.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:22.097Z,1520510002.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:25.188Z,1520510005.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:25.208Z,1520510005.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:25.313Z,1520510005.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:25.345Z,1520510005.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:25.702Z,1520510005.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:25.719Z,1520510005.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:26.099Z,1520510006.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:26.115Z,1520510006.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:26.499Z,1520510006.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:26.517Z,1520510006.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:26.894Z,1520510006.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:26.915Z,1520510006.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:27.305Z,1520510007.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:27.321Z,1520510007.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:30.698Z,1520510010.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:30.713Z,1520510010.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:30.818Z,1520510010.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:30.859Z,1520510010.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:31.146Z,1520510011.146 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0097.lzma
2018-03-08T11:53:31.167Z,1520510011.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:31.210Z,1520510011.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:31.566Z,1520510011.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:31.594Z,1520510011.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:31.939Z,1520510011.939 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0097.lzma.bak
2018-03-08T11:53:31.939Z,1520510011.939 [DataOverHttps](INFO): SBD MOMSN=7985418
2018-03-08T11:53:31.973Z,1520510011.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:31.995Z,1520510011.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:32.545Z,1520510012.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:32.572Z,1520510012.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:32.575Z,1520510012.575 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T11:53:32.575Z,1520510012.575 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T11:53:32.575Z,1520510012.575 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T11:53:32.759Z,1520510012.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:32.798Z,1520510012.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:35.889Z,1520510015.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:35.919Z,1520510015.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:36.024Z,1520510016.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:36.040Z,1520510016.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:36.389Z,1520510016.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:36.422Z,1520510016.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:36.771Z,1520510016.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:36.786Z,1520510016.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:37.180Z,1520510017.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:37.219Z,1520510017.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:37.576Z,1520510017.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:37.591Z,1520510017.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:37.981Z,1520510017.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:38.002Z,1520510018.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:38.381Z,1520510018.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:38.396Z,1520510018.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:38.780Z,1520510018.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:38.802Z,1520510018.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:39.180Z,1520510019.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:39.195Z,1520510019.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:39.579Z,1520510019.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:39.598Z,1520510019.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:39.984Z,1520510019.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:39.999Z,1520510019.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:40.384Z,1520510020.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:40.400Z,1520510020.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:40.784Z,1520510020.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:40.799Z,1520510020.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:41.179Z,1520510021.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:41.202Z,1520510021.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:41.580Z,1520510021.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:41.595Z,1520510021.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:41.979Z,1520510021.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:41.999Z,1520510021.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:42.375Z,1520510022.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:42.391Z,1520510022.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:42.775Z,1520510022.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:42.790Z,1520510022.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:43.185Z,1520510023.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:43.201Z,1520510023.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:43.584Z,1520510023.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:43.599Z,1520510023.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:43.985Z,1520510023.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:44.006Z,1520510024.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:44.376Z,1520510024.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:44.392Z,1520510024.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:44.774Z,1520510024.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:44.793Z,1520510024.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:45.180Z,1520510025.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:45.196Z,1520510025.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:45.579Z,1520510025.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:45.598Z,1520510025.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:45.984Z,1520510025.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:45.000Z,1520510026.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:46.385Z,1520510026.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:46.400Z,1520510026.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:46.784Z,1520510026.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:46.800Z,1520510026.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:47.179Z,1520510027.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:47.198Z,1520510027.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:47.580Z,1520510027.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:47.595Z,1520510027.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:47.978Z,1520510027.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:47.998Z,1520510027.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:48.375Z,1520510028.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:48.390Z,1520510028.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:48.771Z,1520510028.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:48.795Z,1520510028.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:49.186Z,1520510029.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:49.227Z,1520510029.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:49.584Z,1520510029.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:49.599Z,1520510029.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:49.986Z,1520510029.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:50.001Z,1520510030.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:50.380Z,1520510030.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:50.396Z,1520510030.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:50.777Z,1520510030.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:50.792Z,1520510030.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:51.176Z,1520510031.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:51.191Z,1520510031.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:51.574Z,1520510031.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:51.594Z,1520510031.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:51.984Z,1520510031.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:52.000Z,1520510032.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:52.386Z,1520510032.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:52.400Z,1520510032.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:52.785Z,1520510032.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:52.801Z,1520510032.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:53.179Z,1520510033.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:53.203Z,1520510033.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:53.580Z,1520510033.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:53.596Z,1520510033.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:53.979Z,1520510033.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:53.995Z,1520510033.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:54.379Z,1520510034.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:54.395Z,1520510034.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:54.771Z,1520510034.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:54.787Z,1520510034.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:55.186Z,1520510035.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:55.206Z,1520510035.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:55.585Z,1520510035.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:55.601Z,1520510035.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:55.985Z,1520510035.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:55.999Z,1520510035.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:56.374Z,1520510036.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:56.394Z,1520510036.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:56.771Z,1520510036.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:56.794Z,1520510036.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:57.163Z,1520510037.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:57.199Z,1520510037.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:57.580Z,1520510037.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:57.595Z,1520510037.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:57.985Z,1520510037.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:58.000Z,1520510038.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:58.396Z,1520510038.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:58.448Z,1520510038.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:58.779Z,1520510038.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:58.814Z,1520510038.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:59.183Z,1520510039.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:59.220Z,1520510039.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:53:59.573Z,1520510039.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:53:59.627Z,1520510039.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:00.003Z,1520510040.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:00.024Z,1520510040.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:00.403Z,1520510040.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:00.418Z,1520510040.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:00.801Z,1520510040.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:00.815Z,1520510040.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:01.174Z,1520510041.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:01.203Z,1520510041.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:01.585Z,1520510041.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:01.637Z,1520510041.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:01.973Z,1520510041.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:01.996Z,1520510041.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:02.364Z,1520510042.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:02.399Z,1520510042.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:02.767Z,1520510042.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:02.804Z,1520510042.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:03.192Z,1520510043.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:03.213Z,1520510043.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:03.594Z,1520510043.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:03.615Z,1520510043.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:03.978Z,1520510043.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:04.015Z,1520510044.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:04.371Z,1520510044.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:04.411Z,1520510044.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:04.764Z,1520510044.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:04.779Z,1520510044.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:05.175Z,1520510045.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:05.214Z,1520510045.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:05.567Z,1520510045.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:05.587Z,1520510045.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:05.984Z,1520510045.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:06.007Z,1520510046.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:06.393Z,1520510046.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:06.416Z,1520510046.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:06.789Z,1520510046.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:06.805Z,1520510046.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:07.166Z,1520510047.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:07.203Z,1520510047.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:07.570Z,1520510047.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:07.602Z,1520510047.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:07.971Z,1520510047.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:08.004Z,1520510048.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:08.371Z,1520510048.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:08.402Z,1520510048.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:08.767Z,1520510048.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:08.798Z,1520510048.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:09.181Z,1520510049.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:09.209Z,1520510049.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:09.581Z,1520510049.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:09.616Z,1520510049.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:09.981Z,1520510049.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:10.014Z,1520510050.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:10.370Z,1520510050.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:10.405Z,1520510050.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:10.761Z,1520510050.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:10.776Z,1520510050.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:11.175Z,1520510051.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:11.211Z,1520510051.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:11.574Z,1520510051.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:11.589Z,1520510051.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:11.973Z,1520510051.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:11.990Z,1520510051.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:12.385Z,1520510052.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:12.412Z,1520510052.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:12.785Z,1520510052.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:12.800Z,1520510052.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:13.164Z,1520510053.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:13.192Z,1520510053.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:13.576Z,1520510053.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:13.591Z,1520510053.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:13.970Z,1520510053.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:13.985Z,1520510053.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:14.369Z,1520510054.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:14.389Z,1520510054.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:14.774Z,1520510054.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:14.794Z,1520510054.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:15.189Z,1520510055.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:15.204Z,1520510055.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:15.576Z,1520510055.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:15.591Z,1520510055.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:15.977Z,1520510055.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:15.993Z,1520510055.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:16.375Z,1520510056.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:16.390Z,1520510056.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:16.768Z,1520510056.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:16.796Z,1520510056.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:17.178Z,1520510057.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:17.194Z,1520510057.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:17.578Z,1520510057.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:17.593Z,1520510057.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:17.980Z,1520510057.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:17.995Z,1520510057.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:18.381Z,1520510058.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:18.397Z,1520510058.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:18.780Z,1520510058.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:18.802Z,1520510058.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:19.164Z,1520510059.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:19.195Z,1520510059.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:19.580Z,1520510059.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:19.595Z,1520510059.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:19.975Z,1520510059.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:19.990Z,1520510059.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:20.372Z,1520510060.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:20.395Z,1520510060.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:20.775Z,1520510060.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:20.790Z,1520510060.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:21.184Z,1520510061.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:21.202Z,1520510061.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:21.586Z,1520510061.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:21.602Z,1520510061.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:21.984Z,1520510061.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:21.999Z,1520510061.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:22.380Z,1520510062.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:22.395Z,1520510062.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:22.772Z,1520510062.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:22.787Z,1520510062.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:23.175Z,1520510063.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:23.191Z,1520510063.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:23.575Z,1520510063.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:23.590Z,1520510063.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:23.980Z,1520510063.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:23.996Z,1520510063.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:24.385Z,1520510064.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:24.401Z,1520510064.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:24.784Z,1520510064.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:24.800Z,1520510064.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:25.168Z,1520510065.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:25.203Z,1520510065.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:25.578Z,1520510065.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:25.599Z,1520510065.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:25.980Z,1520510065.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:25.995Z,1520510065.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:26.380Z,1520510066.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:26.397Z,1520510066.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:26.775Z,1520510066.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:26.794Z,1520510066.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:27.189Z,1520510067.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:27.205Z,1520510067.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:27.589Z,1520510067.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:27.604Z,1520510067.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:27.988Z,1520510067.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:28.004Z,1520510068.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:28.363Z,1520510068.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:28.390Z,1520510068.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:28.765Z,1520510068.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:28.800Z,1520510068.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:29.173Z,1520510069.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:29.196Z,1520510069.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:29.563Z,1520510069.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:29.591Z,1520510069.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:29.985Z,1520510069.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:30.009Z,1520510070.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:30.392Z,1520510070.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:30.416Z,1520510070.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:30.787Z,1520510070.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:30.802Z,1520510070.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:31.171Z,1520510071.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:31.200Z,1520510071.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:31.566Z,1520510071.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:31.593Z,1520510071.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:31.990Z,1520510071.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:32.006Z,1520510072.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:32.393Z,1520510072.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:32.414Z,1520510072.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:32.789Z,1520510072.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:32.805Z,1520510072.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:33.167Z,1520510073.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:33.193Z,1520510073.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:36.295Z,1520510076.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:36.312Z,1520510076.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:36.417Z,1520510076.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:36.448Z,1520510076.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:36.762Z,1520510076.762 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T11:54:36.762Z,1520510076.762 [NAL9602] Data Fault, FailCount= 4
2018-03-08T11:54:36.762Z,1520510076.762 [NAL9602](ERROR): Data Fault
2018-03-08T11:54:36.779Z,1520510076.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:36.824Z,1520510076.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:36.853Z,1520510076.853 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T11:54:37.162Z,1520510077.162 [NAL9602](INFO): Powering down
2018-03-08T11:54:37.179Z,1520510077.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:37.211Z,1520510077.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:37.578Z,1520510077.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:37.615Z,1520510077.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:37.982Z,1520510077.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:38.010Z,1520510078.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:38.023Z,1520510078.023 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T11:54:38.023Z,1520510078.023 [NAL9602] No Fault, FailCount= 4
2018-03-08T11:54:38.374Z,1520510078.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:38.406Z,1520510078.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:38.775Z,1520510078.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:38.807Z,1520510078.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:39.174Z,1520510079.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:39.207Z,1520510079.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:39.578Z,1520510079.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:39.611Z,1520510079.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:39.972Z,1520510079.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:39.988Z,1520510079.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:40.382Z,1520510080.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:40.415Z,1520510080.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:40.776Z,1520510080.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:40.791Z,1520510080.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:41.173Z,1520510081.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:41.188Z,1520510081.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:41.581Z,1520510081.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:41.596Z,1520510081.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:41.983Z,1520510081.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:41.998Z,1520510081.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:42.379Z,1520510082.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:42.395Z,1520510082.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:42.779Z,1520510082.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:42.812Z,1520510082.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:43.186Z,1520510083.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:43.235Z,1520510083.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:43.572Z,1520510083.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:43.600Z,1520510083.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:43.977Z,1520510083.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:43.000Z,1520510084.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:44.381Z,1520510084.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:44.403Z,1520510084.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:44.772Z,1520510084.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:44.798Z,1520510084.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:45.183Z,1520510085.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:45.349Z,1520510085.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:45.587Z,1520510085.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:45.602Z,1520510085.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:45.972Z,1520510085.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:45.998Z,1520510085.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:46.381Z,1520510086.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:46.402Z,1520510086.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:46.786Z,1520510086.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:46.801Z,1520510086.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:47.172Z,1520510087.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:47.203Z,1520510087.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:47.587Z,1520510087.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:47.603Z,1520510087.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:47.970Z,1520510087.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:48.002Z,1520510088.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:48.368Z,1520510088.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:48.396Z,1520510088.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:48.778Z,1520510088.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:48.805Z,1520510088.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:49.174Z,1520510089.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:49.209Z,1520510089.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:49.578Z,1520510089.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:49.605Z,1520510089.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:49.974Z,1520510089.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:50.001Z,1520510090.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:50.370Z,1520510090.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:50.406Z,1520510090.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:50.768Z,1520510090.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:50.791Z,1520510090.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:51.174Z,1520510091.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:51.206Z,1520510091.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:51.570Z,1520510091.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:51.606Z,1520510091.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:51.968Z,1520510091.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:51.983Z,1520510091.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:52.374Z,1520510092.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:52.410Z,1520510092.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:52.774Z,1520510092.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:52.809Z,1520510092.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:53.173Z,1520510093.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:53.188Z,1520510093.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:53.582Z,1520510093.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:53.618Z,1520510093.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:53.974Z,1520510093.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:53.989Z,1520510093.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:54.375Z,1520510094.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:54.390Z,1520510094.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:54.779Z,1520510094.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:54.795Z,1520510094.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:55.182Z,1520510095.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:55.198Z,1520510095.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:55.579Z,1520510095.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:55.595Z,1520510095.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:55.974Z,1520510095.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:55.995Z,1520510095.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:56.382Z,1520510096.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:56.397Z,1520510096.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:56.774Z,1520510096.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:56.790Z,1520510096.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:57.179Z,1520510097.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:57.195Z,1520510097.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:57.579Z,1520510097.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:57.594Z,1520510097.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:57.976Z,1520510097.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:57.991Z,1520510097.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:58.379Z,1520510098.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:58.395Z,1520510098.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:58.781Z,1520510098.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:58.796Z,1520510098.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:59.179Z,1520510099.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:59.194Z,1520510099.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:59.579Z,1520510099.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:59.599Z,1520510099.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:54:59.981Z,1520510099.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:54:59.996Z,1520510099.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:00.381Z,1520510100.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:00.397Z,1520510100.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:00.784Z,1520510100.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:00.799Z,1520510100.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:01.183Z,1520510101.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:01.230Z,1520510101.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:01.579Z,1520510101.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:01.594Z,1520510101.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:01.979Z,1520510101.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:02.008Z,1520510102.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:02.383Z,1520510102.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:02.398Z,1520510102.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:02.781Z,1520510102.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:02.796Z,1520510102.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:03.180Z,1520510103.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:03.203Z,1520510103.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:03.576Z,1520510103.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:03.603Z,1520510103.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:03.976Z,1520510103.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:03.991Z,1520510103.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:04.378Z,1520510104.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:04.401Z,1520510104.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:04.779Z,1520510104.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:04.794Z,1520510104.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:05.180Z,1520510105.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:05.195Z,1520510105.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:05.583Z,1520510105.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:05.606Z,1520510105.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:05.986Z,1520510105.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:06.001Z,1520510106.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:06.378Z,1520510106.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:06.394Z,1520510106.394 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:06.394Z,1520510106.394 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84
2018-03-08T11:55:06.394Z,1520510106.394 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T11:55:06.396Z,1520510106.396 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:06.396Z,1520510106.396 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84
2018-03-08T11:55:06.396Z,1520510106.396 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T11:55:06.398Z,1520510106.398 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:06.398Z,1520510106.398 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 84
2018-03-08T11:55:06.398Z,1520510106.398 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T11:55:06.410Z,1520510106.410 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T11:55:06.410Z,1520510106.410 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T11:55:06.410Z,1520510106.410 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T11:55:06.796Z,1520510106.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:06.821Z,1520510106.821 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T11:55:06.821Z,1520510106.821 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84
2018-03-08T11:55:06.822Z,1520510106.822 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T11:55:06.822Z,1520510106.822 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84
2018-03-08T11:55:06.822Z,1520510106.822 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T11:55:06.823Z,1520510106.823 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 84
2018-03-08T11:55:07.174Z,1520510107.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:07.212Z,1520510107.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T11:55:07.213Z,1520510107.213 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:55:07.213Z,1520510107.213 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:55:07.213Z,1520510107.213 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T11:55:07.214Z,1520510107.214 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:55:07.215Z,1520510107.215 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:55:07.216Z,1520510107.216 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T11:55:07.217Z,1520510107.217 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:55:07.217Z,1520510107.217 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:55:07.564Z,1520510107.564 [NAL9602](INFO): Powering up NAL9602
2018-03-08T11:55:07.582Z,1520510107.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:07.613Z,1520510107.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T11:55:07.614Z,1520510107.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:07.978Z,1520510107.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:07.994Z,1520510107.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T11:55:07.995Z,1520510107.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:08.382Z,1520510108.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:08.397Z,1520510108.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T11:55:08.398Z,1520510108.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:08.771Z,1520510108.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:08.786Z,1520510108.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T11:55:08.787Z,1520510108.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:09.187Z,1520510109.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:09.221Z,1520510109.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T11:55:09.221Z,1520510109.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:09.579Z,1520510109.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:09.595Z,1520510109.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T11:55:09.595Z,1520510109.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:09.975Z,1520510109.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:09.990Z,1520510109.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T11:55:09.991Z,1520510109.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:10.380Z,1520510110.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:10.395Z,1520510110.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T11:55:10.396Z,1520510110.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:10.781Z,1520510110.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:10.795Z,1520510110.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T11:55:10.797Z,1520510110.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:11.178Z,1520510111.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:11.193Z,1520510111.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T11:55:11.194Z,1520510111.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:11.579Z,1520510111.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:11.598Z,1520510111.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T11:55:11.599Z,1520510111.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:11.983Z,1520510111.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:11.997Z,1520510111.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T11:55:11.998Z,1520510111.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:12.383Z,1520510112.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:12.399Z,1520510112.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T11:55:12.400Z,1520510112.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:12.779Z,1520510112.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:12.802Z,1520510112.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T11:55:12.803Z,1520510112.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:13.188Z,1520510113.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:13.206Z,1520510113.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T11:55:13.207Z,1520510113.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:13.587Z,1520510113.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:13.602Z,1520510113.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T11:55:13.603Z,1520510113.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:13.977Z,1520510113.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:13.000Z,1520510114.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T11:55:14.001Z,1520510114.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:14.378Z,1520510114.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:14.393Z,1520510114.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T11:55:14.394Z,1520510114.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:14.779Z,1520510114.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:14.795Z,1520510114.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T11:55:14.796Z,1520510114.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:15.178Z,1520510115.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:15.202Z,1520510115.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T11:55:15.203Z,1520510115.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:15.582Z,1520510115.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:15.597Z,1520510115.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T11:55:15.598Z,1520510115.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:15.985Z,1520510115.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:15.000Z,1520510116.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T11:55:16.001Z,1520510116.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:16.387Z,1520510116.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:16.402Z,1520510116.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T11:55:16.403Z,1520510116.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:16.787Z,1520510116.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:16.802Z,1520510116.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T11:55:16.803Z,1520510116.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:17.179Z,1520510117.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:17.203Z,1520510117.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T11:55:17.204Z,1520510117.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:17.588Z,1520510117.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:17.603Z,1520510117.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T11:55:17.604Z,1520510117.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:17.987Z,1520510117.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:18.002Z,1520510118.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T11:55:18.003Z,1520510118.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:18.397Z,1520510118.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:18.412Z,1520510118.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T11:55:18.413Z,1520510118.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:18.758Z,1520510118.758 [NAL9602](INFO): NAL9602 initialized
2018-03-08T11:55:18.781Z,1520510118.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:18.809Z,1520510118.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T11:55:18.810Z,1520510118.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:19.186Z,1520510119.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:19.219Z,1520510119.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T11:55:19.220Z,1520510119.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:19.599Z,1520510119.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:19.614Z,1520510119.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T11:55:19.615Z,1520510119.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:19.998Z,1520510119.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:20.013Z,1520510120.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T11:55:20.015Z,1520510120.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:20.397Z,1520510120.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:20.418Z,1520510120.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T11:55:20.419Z,1520510120.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:20.772Z,1520510120.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:20.799Z,1520510120.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T11:55:20.802Z,1520510120.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:21.171Z,1520510121.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:21.206Z,1520510121.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T11:55:21.207Z,1520510121.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:21.575Z,1520510121.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:21.605Z,1520510121.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T11:55:21.606Z,1520510121.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:21.968Z,1520510121.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:21.984Z,1520510121.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T11:55:21.993Z,1520510121.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:22.381Z,1520510122.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:22.407Z,1520510122.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T11:55:22.408Z,1520510122.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:22.798Z,1520510122.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:22.813Z,1520510122.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T11:55:22.813Z,1520510122.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:23.185Z,1520510123.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:23.212Z,1520510123.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T11:55:23.213Z,1520510123.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:23.575Z,1520510123.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:23.602Z,1520510123.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T11:55:23.603Z,1520510123.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:23.978Z,1520510123.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:24.016Z,1520510124.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T11:55:24.018Z,1520510124.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:24.389Z,1520510124.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:24.416Z,1520510124.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T11:55:24.417Z,1520510124.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:24.802Z,1520510124.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:24.821Z,1520510124.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T11:55:24.823Z,1520510124.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:25.187Z,1520510125.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:25.223Z,1520510125.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T11:55:25.224Z,1520510125.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:25.583Z,1520510125.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:25.599Z,1520510125.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T11:55:25.599Z,1520510125.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:25.981Z,1520510125.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:25.997Z,1520510125.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T11:55:25.998Z,1520510125.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:26.389Z,1520510126.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:26.404Z,1520510126.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:26.785Z,1520510126.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:26.801Z,1520510126.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:27.185Z,1520510127.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:27.201Z,1520510127.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:27.583Z,1520510127.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:27.598Z,1520510127.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:27.981Z,1520510127.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:27.996Z,1520510127.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:28.397Z,1520510128.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:28.429Z,1520510128.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:28.793Z,1520510128.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:28.808Z,1520510128.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:29.189Z,1520510129.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:29.204Z,1520510129.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:29.588Z,1520510129.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:29.604Z,1520510129.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:29.985Z,1520510129.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:30.000Z,1520510130.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:30.389Z,1520510130.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:30.405Z,1520510130.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:30.789Z,1520510130.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:30.805Z,1520510130.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:31.188Z,1520510131.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:31.210Z,1520510131.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:31.587Z,1520510131.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:31.604Z,1520510131.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:31.979Z,1520510131.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:32.006Z,1520510132.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:32.396Z,1520510132.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:32.412Z,1520510132.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:32.794Z,1520510132.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:32.809Z,1520510132.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:33.196Z,1520510133.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:33.211Z,1520510133.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:36.286Z,1520510136.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:36.302Z,1520510136.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:36.398Z,1520510136.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:36.441Z,1520510136.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:36.765Z,1520510136.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:36.789Z,1520510136.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:37.181Z,1520510137.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:37.196Z,1520510137.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:37.565Z,1520510137.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:37.589Z,1520510137.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:37.952Z,1520510137.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:37.967Z,1520510137.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:38.355Z,1520510138.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:38.371Z,1520510138.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:38.755Z,1520510138.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:38.771Z,1520510138.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:39.154Z,1520510139.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:39.194Z,1520510139.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:39.565Z,1520510139.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:39.597Z,1520510139.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:39.957Z,1520510139.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:39.973Z,1520510139.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:40.369Z,1520510140.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:40.401Z,1520510140.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:40.760Z,1520510140.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:40.775Z,1520510140.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:41.147Z,1520510141.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:41.169Z,1520510141.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:41.559Z,1520510141.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:41.575Z,1520510141.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:41.955Z,1520510141.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:41.975Z,1520510141.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:42.361Z,1520510142.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:42.377Z,1520510142.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:42.761Z,1520510142.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:42.777Z,1520510142.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:43.162Z,1520510143.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:43.178Z,1520510143.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:43.554Z,1520510143.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:43.574Z,1520510143.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:43.961Z,1520510143.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:43.977Z,1520510143.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:44.371Z,1520510144.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:44.386Z,1520510144.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:44.770Z,1520510144.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:44.785Z,1520510144.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:45.166Z,1520510145.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:45.181Z,1520510145.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:45.547Z,1520510145.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:45.584Z,1520510145.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:45.959Z,1520510145.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:45.976Z,1520510145.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:46.365Z,1520510146.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:46.381Z,1520510146.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:46.773Z,1520510146.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:46.789Z,1520510146.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:47.157Z,1520510147.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:47.186Z,1520510147.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:47.547Z,1520510147.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:47.583Z,1520510147.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:47.951Z,1520510147.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:47.979Z,1520510147.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:48.361Z,1520510148.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:48.393Z,1520510148.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:48.773Z,1520510148.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:48.788Z,1520510148.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:49.170Z,1520510149.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:49.186Z,1520510149.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:49.547Z,1520510149.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:49.582Z,1520510149.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:49.947Z,1520510149.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:49.979Z,1520510149.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:50.370Z,1520510150.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:50.390Z,1520510150.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:50.769Z,1520510150.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:50.791Z,1520510150.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:51.174Z,1520510151.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:51.189Z,1520510151.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:51.549Z,1520510151.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:51.581Z,1520510151.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:51.947Z,1520510151.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:51.979Z,1520510151.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:52.361Z,1520510152.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:52.393Z,1520510152.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:52.777Z,1520510152.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:52.793Z,1520510152.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:53.169Z,1520510153.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:53.189Z,1520510153.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:53.558Z,1520510153.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:53.583Z,1520510153.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:53.951Z,1520510153.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:53.983Z,1520510153.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:54.356Z,1520510154.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:54.372Z,1520510154.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:54.770Z,1520510154.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:54.801Z,1520510154.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:55.157Z,1520510155.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:55.179Z,1520510155.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:55.556Z,1520510155.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:55.579Z,1520510155.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:55.955Z,1520510155.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:55.970Z,1520510155.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:56.361Z,1520510156.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:56.376Z,1520510156.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:56.761Z,1520510156.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:56.777Z,1520510156.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:57.199Z,1520510157.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:57.214Z,1520510157.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:57.562Z,1520510157.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:57.635Z,1520510157.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:57.947Z,1520510157.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:57.999Z,1520510157.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:58.366Z,1520510158.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:58.407Z,1520510158.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:58.767Z,1520510158.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:58.822Z,1520510158.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:59.158Z,1520510159.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:59.173Z,1520510159.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:59.554Z,1520510159.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:59.569Z,1520510159.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:55:59.955Z,1520510159.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:55:59.971Z,1520510159.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:00.358Z,1520510160.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:00.373Z,1520510160.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:00.771Z,1520510160.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:00.813Z,1520510160.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:01.162Z,1520510161.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:01.177Z,1520510161.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:01.562Z,1520510161.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:01.577Z,1520510161.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:01.958Z,1520510161.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:01.974Z,1520510161.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:02.354Z,1520510162.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:02.370Z,1520510162.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:02.758Z,1520510162.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:02.778Z,1520510162.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:03.158Z,1520510163.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:03.174Z,1520510163.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:03.561Z,1520510163.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:03.576Z,1520510163.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:03.965Z,1520510163.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:03.981Z,1520510163.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:04.362Z,1520510164.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:04.377Z,1520510164.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:04.751Z,1520510164.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:04.767Z,1520510164.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:05.158Z,1520510165.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:05.174Z,1520510165.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:05.553Z,1520510165.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:05.573Z,1520510165.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:05.960Z,1520510165.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:05.975Z,1520510165.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:06.364Z,1520510166.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:06.380Z,1520510166.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:06.765Z,1520510166.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:06.781Z,1520510166.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:07.165Z,1520510167.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:07.180Z,1520510167.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:07.559Z,1520510167.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:07.579Z,1520510167.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:07.959Z,1520510167.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:07.982Z,1520510167.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:08.365Z,1520510168.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:08.380Z,1520510168.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:08.765Z,1520510168.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:08.781Z,1520510168.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:09.164Z,1520510169.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:09.179Z,1520510169.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:09.556Z,1520510169.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:09.571Z,1520510169.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:09.959Z,1520510169.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:09.975Z,1520510169.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:10.364Z,1520510170.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:10.380Z,1520510170.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:10.765Z,1520510170.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:10.780Z,1520510170.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:11.164Z,1520510171.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:11.186Z,1520510171.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:11.553Z,1520510171.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:11.575Z,1520510171.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:11.943Z,1520510171.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:11.978Z,1520510171.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:12.368Z,1520510172.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:12.384Z,1520510172.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:12.769Z,1520510172.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:12.784Z,1520510172.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:13.166Z,1520510173.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:13.181Z,1520510173.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:13.560Z,1520510173.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:13.575Z,1520510173.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:13.951Z,1520510173.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:13.973Z,1520510173.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:14.366Z,1520510174.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:14.381Z,1520510174.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:14.769Z,1520510174.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:14.784Z,1520510174.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:15.168Z,1520510175.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:15.190Z,1520510175.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:15.565Z,1520510175.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:15.580Z,1520510175.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:15.959Z,1520510175.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:15.978Z,1520510175.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:16.365Z,1520510176.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:16.381Z,1520510176.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:16.772Z,1520510176.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:16.787Z,1520510176.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:17.169Z,1520510177.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:17.195Z,1520510177.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:17.561Z,1520510177.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:17.576Z,1520510177.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:17.947Z,1520510177.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:17.973Z,1520510177.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:18.370Z,1520510178.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:18.385Z,1520510178.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:18.769Z,1520510178.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:18.785Z,1520510178.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:19.164Z,1520510179.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:19.191Z,1520510179.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:19.551Z,1520510179.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:19.579Z,1520510179.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:19.950Z,1520510179.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:19.977Z,1520510179.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:20.371Z,1520510180.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:20.386Z,1520510180.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:20.773Z,1520510180.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:20.789Z,1520510180.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:21.164Z,1520510181.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:21.187Z,1520510181.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:21.548Z,1520510181.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:21.575Z,1520510181.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:21.951Z,1520510181.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:21.982Z,1520510181.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:22.364Z,1520510182.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:22.391Z,1520510182.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:22.775Z,1520510182.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:22.790Z,1520510182.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:23.170Z,1520510183.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:23.190Z,1520510183.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:23.567Z,1520510183.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:23.590Z,1520510183.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:23.943Z,1520510183.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:23.969Z,1520510183.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:24.370Z,1520510184.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:24.391Z,1520510184.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:24.772Z,1520510184.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:24.794Z,1520510184.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:25.167Z,1520510185.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:25.190Z,1520510185.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:25.555Z,1520510185.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:25.587Z,1520510185.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:25.954Z,1520510185.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:25.970Z,1520510185.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:26.365Z,1520510186.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:26.393Z,1520510186.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:26.757Z,1520510186.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:26.778Z,1520510186.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:27.162Z,1520510187.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:27.182Z,1520510187.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:27.561Z,1520510187.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:27.575Z,1520510187.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:27.952Z,1520510187.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:27.976Z,1520510187.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:28.365Z,1520510188.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:28.381Z,1520510188.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:28.766Z,1520510188.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:28.781Z,1520510188.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:29.163Z,1520510189.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:29.200Z,1520510189.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:29.561Z,1520510189.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:29.576Z,1520510189.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:29.962Z,1520510189.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:29.977Z,1520510189.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:30.366Z,1520510190.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:30.386Z,1520510190.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:30.769Z,1520510190.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:30.784Z,1520510190.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:31.169Z,1520510191.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:31.191Z,1520510191.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:31.555Z,1520510191.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:31.572Z,1520510191.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:31.956Z,1520510191.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:31.979Z,1520510191.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:32.386Z,1520510192.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:32.417Z,1520510192.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:32.766Z,1520510192.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:32.782Z,1520510192.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:33.168Z,1520510193.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:33.214Z,1520510193.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:33.560Z,1520510193.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:33.575Z,1520510193.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:36.908Z,1520510196.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:36.924Z,1520510196.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:37.041Z,1520510197.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:37.082Z,1520510197.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:37.393Z,1520510197.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:37.418Z,1520510197.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:37.793Z,1520510197.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:37.819Z,1520510197.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:38.175Z,1520510198.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:38.191Z,1520510198.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:38.580Z,1520510198.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:38.595Z,1520510198.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:38.981Z,1520510198.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:38.996Z,1520510198.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:39.381Z,1520510199.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:39.397Z,1520510199.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:39.790Z,1520510199.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:39.817Z,1520510199.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:40.193Z,1520510200.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:40.225Z,1520510200.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:40.582Z,1520510200.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:40.602Z,1520510200.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:40.977Z,1520510200.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:40.992Z,1520510200.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:41.393Z,1520510201.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:41.422Z,1520510201.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:41.782Z,1520510201.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:41.797Z,1520510201.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:42.196Z,1520510202.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:42.222Z,1520510202.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:42.577Z,1520510202.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:42.601Z,1520510202.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:42.981Z,1520510202.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:43.026Z,1520510203.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:43.398Z,1520510203.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:43.413Z,1520510203.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:43.795Z,1520510203.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:43.832Z,1520510203.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:44.178Z,1520510204.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:44.205Z,1520510204.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:44.600Z,1520510204.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:44.628Z,1520510204.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:44.973Z,1520510204.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:45.014Z,1520510205.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:45.396Z,1520510205.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:45.415Z,1520510205.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:45.794Z,1520510205.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:45.809Z,1520510205.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:46.195Z,1520510206.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:46.210Z,1520510206.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:46.572Z,1520510206.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:46.603Z,1520510206.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:46.975Z,1520510206.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:47.006Z,1520510207.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:47.389Z,1520510207.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:47.421Z,1520510207.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:47.799Z,1520510207.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:47.814Z,1520510207.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:48.186Z,1520510208.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:48.215Z,1520510208.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:48.579Z,1520510208.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:48.606Z,1520510208.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:48.975Z,1520510208.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:48.991Z,1520510208.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:49.390Z,1520510209.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:49.416Z,1520510209.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:49.789Z,1520510209.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:49.813Z,1520510209.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:50.190Z,1520510210.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:50.213Z,1520510210.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:50.578Z,1520510210.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:50.593Z,1520510210.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:50.978Z,1520510210.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:50.995Z,1520510210.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:51.394Z,1520510211.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:51.422Z,1520510211.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:51.790Z,1520510211.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:51.825Z,1520510211.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:52.189Z,1520510212.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:52.214Z,1520510212.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:52.581Z,1520510212.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:52.596Z,1520510212.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:52.981Z,1520510212.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:52.996Z,1520510212.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:53.393Z,1520510213.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:53.424Z,1520510213.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:53.793Z,1520510213.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:53.829Z,1520510213.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:54.187Z,1520510214.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:54.206Z,1520510214.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:54.584Z,1520510214.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:54.599Z,1520510214.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:54.983Z,1520510214.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:54.998Z,1520510214.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:55.385Z,1520510215.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:55.401Z,1520510215.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:55.789Z,1520510215.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:55.804Z,1520510215.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:56.186Z,1520510216.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:56.202Z,1520510216.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:56.583Z,1520510216.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:56.598Z,1520510216.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:56.983Z,1520510216.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:56.998Z,1520510216.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:57.385Z,1520510217.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:57.401Z,1520510217.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:57.785Z,1520510217.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:57.800Z,1520510217.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:58.186Z,1520510218.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:58.200Z,1520510218.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:58.583Z,1520510218.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:58.599Z,1520510218.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:58.984Z,1520510218.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:58.000Z,1520510219.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:59.385Z,1520510219.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:59.400Z,1520510219.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:56:59.789Z,1520510219.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:56:59.805Z,1520510219.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:00.201Z,1520510220.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:00.237Z,1520510220.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:00.585Z,1520510220.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:00.600Z,1520510220.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:00.983Z,1520510220.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:00.999Z,1520510220.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:01.389Z,1520510221.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:01.404Z,1520510221.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:01.793Z,1520510221.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:01.808Z,1520510221.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:02.194Z,1520510222.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:02.214Z,1520510222.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:02.584Z,1520510222.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:02.600Z,1520510222.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:02.966Z,1520510222.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:02.999Z,1520510222.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:03.392Z,1520510223.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:03.414Z,1520510223.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:03.793Z,1520510223.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:03.808Z,1520510223.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:04.194Z,1520510224.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:04.209Z,1520510224.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:04.584Z,1520510224.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:04.599Z,1520510224.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:04.979Z,1520510224.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:04.998Z,1520510224.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:05.390Z,1520510225.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:05.410Z,1520510225.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:05.794Z,1520510225.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:05.809Z,1520510225.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:06.193Z,1520510226.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:06.209Z,1520510226.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:06.585Z,1520510226.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:06.600Z,1520510226.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:06.983Z,1520510226.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:06.998Z,1520510226.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:07.390Z,1520510227.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:07.405Z,1520510227.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:07.789Z,1520510227.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:07.804Z,1520510227.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:08.193Z,1520510228.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:08.209Z,1520510228.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:08.585Z,1520510228.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:08.600Z,1520510228.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:08.967Z,1520510228.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:08.994Z,1520510228.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:09.393Z,1520510229.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:09.408Z,1520510229.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:09.793Z,1520510229.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:09.808Z,1520510229.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:10.194Z,1520510230.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:10.209Z,1520510230.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:10.586Z,1520510230.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:10.615Z,1520510230.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:10.983Z,1520510230.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:10.998Z,1520510230.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:11.391Z,1520510231.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:11.405Z,1520510231.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:11.793Z,1520510231.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:11.808Z,1520510231.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:12.193Z,1520510232.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:12.208Z,1520510232.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:12.584Z,1520510232.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:12.600Z,1520510232.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:12.983Z,1520510232.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:13.007Z,1520510233.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:13.393Z,1520510233.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:13.414Z,1520510233.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:13.793Z,1520510233.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:13.808Z,1520510233.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:14.193Z,1520510234.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:14.215Z,1520510234.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:14.580Z,1520510234.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:14.602Z,1520510234.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:14.966Z,1520510234.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:14.994Z,1520510234.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:15.394Z,1520510235.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:15.414Z,1520510235.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:15.793Z,1520510235.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:15.815Z,1520510235.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:16.198Z,1520510236.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:16.217Z,1520510236.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:16.584Z,1520510236.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:16.599Z,1520510236.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:16.975Z,1520510236.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:16.998Z,1520510236.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:17.394Z,1520510237.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:17.409Z,1520510237.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:17.792Z,1520510237.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:17.807Z,1520510237.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:18.194Z,1520510238.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:18.214Z,1520510238.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:18.586Z,1520510238.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:18.600Z,1520510238.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:18.985Z,1520510238.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:18.000Z,1520510239.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:19.391Z,1520510239.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:19.406Z,1520510239.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:19.791Z,1520510239.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:19.806Z,1520510239.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:20.194Z,1520510240.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:20.209Z,1520510240.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:20.584Z,1520510240.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:20.600Z,1520510240.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:20.982Z,1520510240.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:21.014Z,1520510241.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:21.394Z,1520510241.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:21.409Z,1520510241.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:21.793Z,1520510241.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:21.809Z,1520510241.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:22.202Z,1520510242.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:22.233Z,1520510242.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:22.584Z,1520510242.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:22.607Z,1520510242.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:22.971Z,1520510242.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:23.007Z,1520510243.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:23.394Z,1520510243.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:23.409Z,1520510243.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:23.794Z,1520510243.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:23.809Z,1520510243.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:24.185Z,1520510244.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:24.208Z,1520510244.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:24.571Z,1520510244.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:24.603Z,1520510244.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:24.976Z,1520510244.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:25.003Z,1520510245.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:25.385Z,1520510245.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:25.408Z,1520510245.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:25.794Z,1520510245.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:25.809Z,1520510245.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:26.185Z,1520510246.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:26.211Z,1520510246.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:26.572Z,1520510246.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:26.603Z,1520510246.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:26.972Z,1520510246.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:27.006Z,1520510247.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:27.385Z,1520510247.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:27.410Z,1520510247.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:27.794Z,1520510247.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:27.810Z,1520510247.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:28.190Z,1520510248.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:28.222Z,1520510248.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:28.576Z,1520510248.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:28.604Z,1520510248.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:28.971Z,1520510248.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:29.007Z,1520510249.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:29.385Z,1520510249.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:29.410Z,1520510249.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:29.785Z,1520510249.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:29.819Z,1520510249.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:30.186Z,1520510250.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:30.218Z,1520510250.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:30.579Z,1520510250.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:30.611Z,1520510250.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:30.972Z,1520510250.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:30.988Z,1520510250.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:31.385Z,1520510251.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:31.412Z,1520510251.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:31.785Z,1520510251.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:31.814Z,1520510251.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:32.182Z,1520510252.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:32.214Z,1520510252.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:32.578Z,1520510252.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:32.615Z,1520510252.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:32.979Z,1520510252.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:32.994Z,1520510252.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:33.382Z,1520510253.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:33.397Z,1520510253.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:33.789Z,1520510253.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:33.821Z,1520510253.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:36.922Z,1520510256.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:36.938Z,1520510256.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:37.033Z,1520510257.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:37.074Z,1520510257.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:37.394Z,1520510257.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:37.424Z,1520510257.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:37.788Z,1520510257.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:37.803Z,1520510257.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:38.185Z,1520510258.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:38.200Z,1520510258.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:38.602Z,1520510258.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:38.634Z,1520510258.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:39.012Z,1520510259.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:39.027Z,1520510259.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:39.393Z,1520510259.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:39.425Z,1520510259.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:39.784Z,1520510259.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:39.799Z,1520510259.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:40.191Z,1520510260.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:40.206Z,1520510260.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:40.585Z,1520510260.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:40.630Z,1520510260.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:40.988Z,1520510260.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:41.004Z,1520510261.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:41.405Z,1520510261.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:41.430Z,1520510261.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:41.797Z,1520510261.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:41.828Z,1520510261.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:42.201Z,1520510262.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:42.224Z,1520510262.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:42.591Z,1520510262.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:42.606Z,1520510262.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:42.980Z,1520510262.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:42.996Z,1520510262.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:43.402Z,1520510263.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:43.426Z,1520510263.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:43.801Z,1520510263.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:43.825Z,1520510263.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:44.193Z,1520510264.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:44.229Z,1520510264.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:44.589Z,1520510264.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:44.605Z,1520510264.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:44.991Z,1520510264.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:45.005Z,1520510265.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:45.397Z,1520510265.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:45.429Z,1520510265.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:45.813Z,1520510265.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:45.842Z,1520510265.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:46.201Z,1520510266.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:46.232Z,1520510266.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:46.601Z,1520510266.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:46.648Z,1520510266.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:46.989Z,1520510266.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:47.004Z,1520510267.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:47.405Z,1520510267.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:47.496Z,1520510267.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:47.803Z,1520510267.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:47.843Z,1520510267.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:48.205Z,1520510268.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:48.237Z,1520510268.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:48.597Z,1520510268.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:48.612Z,1520510268.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:48.979Z,1520510268.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:49.015Z,1520510269.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:49.405Z,1520510269.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:49.432Z,1520510269.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:49.808Z,1520510269.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:49.867Z,1520510269.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:50.197Z,1520510270.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:50.214Z,1520510270.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:50.583Z,1520510270.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:50.618Z,1520510270.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:50.987Z,1520510270.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:51.014Z,1520510271.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:51.393Z,1520510271.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:51.420Z,1520510271.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:51.822Z,1520510271.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:51.838Z,1520510271.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:52.197Z,1520510272.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:52.231Z,1520510272.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:52.591Z,1520510272.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:52.630Z,1520510272.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:52.984Z,1520510272.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:53.023Z,1520510273.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:53.397Z,1520510273.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:53.424Z,1520510273.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:53.793Z,1520510273.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:53.819Z,1520510273.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:54.194Z,1520510274.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:54.220Z,1520510274.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:54.583Z,1520510274.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:54.598Z,1520510274.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:54.984Z,1520510274.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:55.000Z,1520510275.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:55.401Z,1520510275.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:55.425Z,1520510275.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:55.801Z,1520510275.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:55.825Z,1520510275.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:56.190Z,1520510276.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:56.205Z,1520510276.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:56.588Z,1520510276.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:56.603Z,1520510276.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:56.984Z,1520510276.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:56.999Z,1520510276.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:57.390Z,1520510277.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:57.413Z,1520510277.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:57.802Z,1520510277.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:57.817Z,1520510277.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:58.198Z,1520510278.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:58.218Z,1520510278.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:58.589Z,1520510278.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:58.609Z,1520510278.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:58.995Z,1520510278.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:59.011Z,1520510279.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:59.397Z,1520510279.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:59.412Z,1520510279.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:57:59.802Z,1520510279.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:57:59.818Z,1520510279.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:00.203Z,1520510280.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:00.219Z,1520510280.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:00.597Z,1520510280.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:00.612Z,1520510280.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:00.980Z,1520510280.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:01.008Z,1520510281.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:01.401Z,1520510281.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:01.417Z,1520510281.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:01.801Z,1520510281.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:01.816Z,1520510281.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:02.200Z,1520510282.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:02.219Z,1520510282.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:02.598Z,1520510282.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:02.613Z,1520510282.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:02.988Z,1520510282.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:03.003Z,1520510283.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:03.396Z,1520510283.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:03.420Z,1520510283.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:03.804Z,1520510283.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:03.819Z,1520510283.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:04.205Z,1520510284.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:04.226Z,1520510284.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:04.591Z,1520510284.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:04.607Z,1520510284.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:04.989Z,1520510284.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:05.009Z,1520510285.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:05.405Z,1520510285.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:05.420Z,1520510285.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:05.800Z,1520510285.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:05.824Z,1520510285.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:06.205Z,1520510286.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:06.220Z,1520510286.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:06.584Z,1520510286.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:06.620Z,1520510286.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:06.977Z,1520510286.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:07.013Z,1520510287.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:07.409Z,1520510287.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:07.425Z,1520510287.425 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:07.425Z,1520510287.425 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85
2018-03-08T11:58:07.425Z,1520510287.425 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T11:58:07.427Z,1520510287.427 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:07.427Z,1520510287.427 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85
2018-03-08T11:58:07.427Z,1520510287.427 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T11:58:07.429Z,1520510287.429 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:07.429Z,1520510287.429 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 85
2018-03-08T11:58:07.429Z,1520510287.429 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T11:58:07.461Z,1520510287.461 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T11:58:07.461Z,1520510287.461 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T11:58:07.461Z,1520510287.461 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T11:58:07.804Z,1520510287.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:07.853Z,1520510287.853 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T11:58:07.853Z,1520510287.853 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85
2018-03-08T11:58:07.853Z,1520510287.853 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T11:58:07.853Z,1520510287.853 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85
2018-03-08T11:58:07.854Z,1520510287.854 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T11:58:07.854Z,1520510287.854 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 85
2018-03-08T11:58:08.193Z,1520510288.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:08.222Z,1520510288.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T11:58:08.222Z,1520510288.222 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:58:08.222Z,1520510288.222 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:58:08.223Z,1520510288.223 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T11:58:08.223Z,1520510288.223 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:58:08.223Z,1520510288.223 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:58:08.224Z,1520510288.224 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T11:58:08.224Z,1520510288.224 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T11:58:08.229Z,1520510288.229 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T11:58:08.583Z,1520510288.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:08.615Z,1520510288.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T11:58:08.616Z,1520510288.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:08.986Z,1520510288.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:09.019Z,1520510289.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T11:58:09.020Z,1520510289.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:09.394Z,1520510289.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:09.422Z,1520510289.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T11:58:09.423Z,1520510289.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:09.810Z,1520510289.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:09.825Z,1520510289.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T11:58:09.826Z,1520510289.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:10.212Z,1520510290.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:10.234Z,1520510290.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T11:58:10.235Z,1520510290.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:10.588Z,1520510290.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:10.695Z,1520510290.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-03-08T11:58:10.697Z,1520510290.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:10.982Z,1520510290.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:11.022Z,1520510291.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T11:58:11.023Z,1520510291.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:11.397Z,1520510291.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:11.423Z,1520510291.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T11:58:11.424Z,1520510291.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:11.797Z,1520510291.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:11.822Z,1520510291.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T11:58:11.823Z,1520510291.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:12.202Z,1520510292.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:12.227Z,1520510292.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T11:58:12.228Z,1520510292.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:12.588Z,1520510292.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:12.622Z,1520510292.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T11:58:12.623Z,1520510292.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:12.977Z,1520510292.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:12.996Z,1520510292.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T11:58:13.001Z,1520510293.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:13.405Z,1520510293.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:13.435Z,1520510293.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T11:58:13.437Z,1520510293.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:13.793Z,1520510293.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:13.807Z,1520510293.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T11:58:13.808Z,1520510293.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:14.193Z,1520510294.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:14.214Z,1520510294.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T11:58:14.215Z,1520510294.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:14.593Z,1520510294.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:14.607Z,1520510294.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T11:58:14.609Z,1520510294.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:14.992Z,1520510294.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:15.007Z,1520510295.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T11:58:15.008Z,1520510295.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:15.393Z,1520510295.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:15.408Z,1520510295.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T11:58:15.409Z,1520510295.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:15.797Z,1520510295.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:15.812Z,1520510295.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T11:58:15.813Z,1520510295.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:16.205Z,1520510296.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:16.240Z,1520510296.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T11:58:16.241Z,1520510296.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:16.593Z,1520510296.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:16.608Z,1520510296.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T11:58:16.609Z,1520510296.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:16.991Z,1520510296.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:17.006Z,1520510297.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T11:58:17.007Z,1520510297.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:17.397Z,1520510297.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:17.412Z,1520510297.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T11:58:17.413Z,1520510297.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:17.805Z,1520510297.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:17.820Z,1520510297.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T11:58:17.837Z,1520510297.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:18.197Z,1520510298.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:18.211Z,1520510298.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T11:58:18.213Z,1520510298.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:18.596Z,1520510298.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:18.610Z,1520510298.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T11:58:18.611Z,1520510298.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:18.985Z,1520510298.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:19.017Z,1520510299.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T11:58:19.018Z,1520510299.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:19.400Z,1520510299.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:19.418Z,1520510299.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T11:58:19.419Z,1520510299.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:19.805Z,1520510299.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:19.819Z,1520510299.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T11:58:19.820Z,1520510299.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:20.193Z,1520510300.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:20.224Z,1520510300.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T11:58:20.225Z,1520510300.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:20.596Z,1520510300.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:20.611Z,1520510300.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T11:58:20.612Z,1520510300.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:20.978Z,1520510300.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:21.005Z,1520510301.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T11:58:21.006Z,1520510301.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:21.394Z,1520510301.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:21.421Z,1520510301.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T11:58:21.422Z,1520510301.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:21.808Z,1520510301.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:21.830Z,1520510301.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T11:58:21.831Z,1520510301.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:22.205Z,1520510302.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:22.226Z,1520510302.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T11:58:22.227Z,1520510302.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:22.596Z,1520510302.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:22.611Z,1520510302.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T11:58:22.612Z,1520510302.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:22.982Z,1520510302.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:23.014Z,1520510303.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T11:58:23.015Z,1520510303.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:23.406Z,1520510303.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:23.421Z,1520510303.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T11:58:23.422Z,1520510303.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:23.802Z,1520510303.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:23.817Z,1520510303.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T11:58:23.818Z,1520510303.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:24.212Z,1520510304.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:24.234Z,1520510304.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T11:58:24.235Z,1520510304.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:24.586Z,1520510304.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:24.613Z,1520510304.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T11:58:24.614Z,1520510304.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:24.980Z,1520510304.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:25.014Z,1520510305.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T11:58:25.015Z,1520510305.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:25.382Z,1520510305.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:25.409Z,1520510305.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T11:58:25.409Z,1520510305.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:25.779Z,1520510305.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:25.810Z,1520510305.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T11:58:25.811Z,1520510305.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:26.180Z,1520510306.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:26.214Z,1520510306.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T11:58:26.215Z,1520510306.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:26.609Z,1520510306.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:26.630Z,1520510306.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T11:58:26.631Z,1520510306.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:27.009Z,1520510307.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:27.024Z,1520510307.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T11:58:27.025Z,1520510307.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:27.401Z,1520510307.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:27.417Z,1520510307.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T11:58:27.417Z,1520510307.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:27.782Z,1520510307.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:27.809Z,1520510307.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:28.183Z,1520510308.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:28.210Z,1520510308.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:28.587Z,1520510308.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:28.619Z,1520510308.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:28.983Z,1520510308.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:29.009Z,1520510309.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:29.413Z,1520510309.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:29.434Z,1520510309.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:29.797Z,1520510309.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:29.816Z,1520510309.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:30.201Z,1520510310.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:30.217Z,1520510310.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:30.583Z,1520510310.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:30.619Z,1520510310.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:30.976Z,1520510310.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:30.991Z,1520510310.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:31.398Z,1520510311.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:31.474Z,1520510311.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:31.797Z,1520510311.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:31.812Z,1520510311.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:32.189Z,1520510312.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:32.205Z,1520510312.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:32.583Z,1520510312.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:32.599Z,1520510312.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:32.984Z,1520510312.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:32.999Z,1520510312.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:33.002Z,1520510313.002 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T11:58:33.003Z,1520510313.003 [Default:CheckIn:C.Wait] Stopped
2018-03-08T11:58:33.003Z,1520510313.003 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T11:58:33.003Z,1520510313.003 [Default:CheckIn:D] Running Loop=1
2018-03-08T11:58:33.397Z,1520510313.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:33.419Z,1520510313.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:33.422Z,1520510313.422 [Default:CheckIn:D] Stopped
2018-03-08T11:58:33.422Z,1520510313.422 [Default:CheckIn:E] Running Loop=1
2018-03-08T11:58:33.801Z,1520510313.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:33.817Z,1520510313.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:33.820Z,1520510313.820 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 252.810270 min 
2018-03-08T11:58:33.820Z,1520510313.820 [Default:CheckIn:E] Stopped
2018-03-08T11:58:33.820Z,1520510313.820 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T11:58:33.820Z,1520510313.820 [Default:CheckIn] Stopped
2018-03-08T11:58:33.820Z,1520510313.820 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T11:58:33.821Z,1520510313.821 [Default:CheckIn](INFO): Running loop #25
2018-03-08T11:58:33.821Z,1520510313.821 [Default:CheckIn] Running Loop=25
2018-03-08T11:58:33.821Z,1520510313.821 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T11:58:33.821Z,1520510313.821 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T11:58:37.407Z,1520510317.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:37.422Z,1520510317.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:37.513Z,1520510317.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:37.556Z,1520510317.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:37.912Z,1520510317.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:37.927Z,1520510317.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:38.310Z,1520510318.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:38.325Z,1520510318.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:38.713Z,1520510318.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:38.729Z,1520510318.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:39.110Z,1520510319.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:39.125Z,1520510319.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:39.513Z,1520510319.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:39.528Z,1520510319.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:39.910Z,1520510319.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:39.939Z,1520510319.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:40.316Z,1520510320.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:40.331Z,1520510320.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:40.712Z,1520510320.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:40.727Z,1520510320.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:41.104Z,1520510321.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:41.119Z,1520510321.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:41.506Z,1520510321.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:41.526Z,1520510321.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:41.913Z,1520510321.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:41.927Z,1520510321.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:42.303Z,1520510322.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:42.319Z,1520510322.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:42.717Z,1520510322.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:42.733Z,1520510322.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:43.116Z,1520510323.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:43.131Z,1520510323.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:43.514Z,1520510323.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:43.542Z,1520510323.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:43.909Z,1520510323.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:43.924Z,1520510323.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:44.295Z,1520510324.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:44.322Z,1520510324.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:44.709Z,1520510324.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:44.724Z,1520510324.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:45.103Z,1520510325.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:45.126Z,1520510325.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:45.515Z,1520510325.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:45.536Z,1520510325.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:45.916Z,1520510325.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:45.932Z,1520510325.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:46.319Z,1520510326.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:46.334Z,1520510326.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:46.708Z,1520510326.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:46.723Z,1520510326.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:47.096Z,1520510327.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:47.136Z,1520510327.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:47.511Z,1520510327.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:47.534Z,1520510327.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:47.912Z,1520510327.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:47.928Z,1520510327.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:48.305Z,1520510328.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:48.325Z,1520510328.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:48.717Z,1520510328.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:48.738Z,1520510328.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:49.118Z,1520510329.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:49.133Z,1520510329.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:49.513Z,1520510329.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:49.536Z,1520510329.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:49.899Z,1520510329.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:49.930Z,1520510329.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:50.295Z,1520510330.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:50.331Z,1520510330.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:50.703Z,1520510330.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:50.730Z,1520510330.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:51.119Z,1520510331.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:51.147Z,1520510331.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:51.517Z,1520510331.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:51.547Z,1520510331.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:51.913Z,1520510331.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:51.939Z,1520510331.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:52.312Z,1520510332.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:52.349Z,1520510332.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:52.707Z,1520510332.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:52.797Z,1520510332.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:53.103Z,1520510333.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:53.123Z,1520510333.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:53.508Z,1520510333.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:53.523Z,1520510333.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:53.904Z,1520510333.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:53.919Z,1520510333.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:54.301Z,1520510334.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:54.316Z,1520510334.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:54.739Z,1520510334.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:54.755Z,1520510334.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:55.117Z,1520510335.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:55.132Z,1520510335.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:55.521Z,1520510335.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:55.552Z,1520510335.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:55.909Z,1520510335.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:55.924Z,1520510335.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:56.308Z,1520510336.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:56.323Z,1520510336.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:56.710Z,1520510336.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:56.725Z,1520510336.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:57.107Z,1520510337.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:57.126Z,1520510337.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:57.513Z,1520510337.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:57.528Z,1520510337.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:57.910Z,1520510337.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:57.925Z,1520510337.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:58.310Z,1520510338.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:58.325Z,1520510338.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:58.707Z,1520510338.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:58.722Z,1520510338.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:59.100Z,1520510339.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:59.125Z,1520510339.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:59.506Z,1520510339.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:59.522Z,1520510339.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:58:59.908Z,1520510339.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:58:59.923Z,1520510339.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:00.306Z,1520510340.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:00.322Z,1520510340.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:00.722Z,1520510340.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:00.753Z,1520510340.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:01.117Z,1520510341.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:01.133Z,1520510341.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:01.513Z,1520510341.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:01.530Z,1520510341.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:01.908Z,1520510341.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:01.923Z,1520510341.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:02.310Z,1520510342.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:02.325Z,1520510342.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:02.711Z,1520510342.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:02.727Z,1520510342.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:03.107Z,1520510343.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:03.122Z,1520510343.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:03.513Z,1520510343.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:03.528Z,1520510343.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:03.913Z,1520510343.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:03.928Z,1520510343.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:04.312Z,1520510344.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:04.334Z,1520510344.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:04.710Z,1520510344.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:04.725Z,1520510344.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:05.104Z,1520510345.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:05.119Z,1520510345.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:05.505Z,1520510345.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:05.521Z,1520510345.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:05.908Z,1520510345.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:05.931Z,1520510345.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:06.296Z,1520510346.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:06.323Z,1520510346.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:06.716Z,1520510346.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:06.731Z,1520510346.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:07.116Z,1520510347.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:07.131Z,1520510347.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:07.516Z,1520510347.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:07.538Z,1520510347.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:07.910Z,1520510347.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:07.926Z,1520510347.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:08.307Z,1520510348.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:08.322Z,1520510348.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:08.713Z,1520510348.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:08.728Z,1520510348.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:09.106Z,1520510349.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:09.122Z,1520510349.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:09.521Z,1520510349.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:09.536Z,1520510349.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:09.917Z,1520510349.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:09.932Z,1520510349.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:10.317Z,1520510350.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:10.333Z,1520510350.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:10.699Z,1520510350.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:10.726Z,1520510350.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:11.096Z,1520510351.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:11.128Z,1520510351.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:11.502Z,1520510351.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:11.529Z,1520510351.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:11.899Z,1520510351.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:11.931Z,1520510351.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:12.299Z,1520510352.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:12.330Z,1520510352.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:12.713Z,1520510352.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:12.736Z,1520510352.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:13.122Z,1520510353.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:13.137Z,1520510353.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:13.513Z,1520510353.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:13.537Z,1520510353.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:13.899Z,1520510353.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:13.927Z,1520510353.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:14.302Z,1520510354.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:14.334Z,1520510354.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:14.703Z,1520510354.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:14.734Z,1520510354.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:15.098Z,1520510355.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:15.134Z,1520510355.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:15.521Z,1520510355.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:15.541Z,1520510355.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:15.909Z,1520510355.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:15.942Z,1520510355.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:16.322Z,1520510356.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:16.337Z,1520510356.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:16.699Z,1520510356.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:16.735Z,1520510356.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:17.096Z,1520510357.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:17.111Z,1520510357.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:17.502Z,1520510357.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:17.538Z,1520510357.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:17.903Z,1520510357.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:17.946Z,1520510357.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:18.301Z,1520510358.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:18.316Z,1520510358.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:18.717Z,1520510358.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:18.740Z,1520510358.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:19.117Z,1520510359.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:19.141Z,1520510359.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:19.513Z,1520510359.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:19.549Z,1520510359.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:19.908Z,1520510359.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:19.923Z,1520510359.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:20.309Z,1520510360.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:20.324Z,1520510360.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:20.705Z,1520510360.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:20.720Z,1520510360.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:21.105Z,1520510361.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:21.120Z,1520510361.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:21.521Z,1520510361.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:21.544Z,1520510361.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:21.905Z,1520510361.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:21.921Z,1520510361.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:22.322Z,1520510362.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:22.345Z,1520510362.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:22.707Z,1520510362.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:22.723Z,1520510362.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:23.105Z,1520510363.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:23.120Z,1520510363.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:23.508Z,1520510363.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:23.523Z,1520510363.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:23.906Z,1520510363.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:23.921Z,1520510363.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:24.307Z,1520510364.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:24.326Z,1520510364.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:24.721Z,1520510364.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:24.743Z,1520510364.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:25.117Z,1520510365.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:25.141Z,1520510365.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:25.513Z,1520510365.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:25.529Z,1520510365.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:25.909Z,1520510365.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:25.924Z,1520510365.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:26.302Z,1520510366.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:26.327Z,1520510366.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:26.706Z,1520510366.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:26.735Z,1520510366.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:27.110Z,1520510367.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:27.134Z,1520510367.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:27.521Z,1520510367.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:27.542Z,1520510367.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:27.917Z,1520510367.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:27.938Z,1520510367.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:28.317Z,1520510368.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:28.333Z,1520510368.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:28.726Z,1520510368.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:29.123Z,1520510369.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:29.523Z,1520510369.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:29.925Z,1520510369.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:30.323Z,1520510370.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:30.738Z,1520510370.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:31.136Z,1520510371.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:31.541Z,1520510371.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:31.934Z,1520510371.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:32.326Z,1520510372.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:32.735Z,1520510372.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:33.139Z,1520510373.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:33.550Z,1520510373.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:33.940Z,1520510373.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:37.044Z,1520510377.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:37.187Z,1520510377.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:37.515Z,1520510377.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:37.912Z,1520510377.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:38.322Z,1520510378.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:38.743Z,1520510378.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:39.105Z,1520510379.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:39.121Z,1520510379.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:39.502Z,1520510379.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:39.519Z,1520510379.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:39.900Z,1520510379.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:39.915Z,1520510379.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:40.299Z,1520510380.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:40.314Z,1520510380.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:40.700Z,1520510380.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:40.716Z,1520510380.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:41.098Z,1520510381.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:41.113Z,1520510381.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:41.514Z,1520510381.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:41.552Z,1520510381.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:41.905Z,1520510381.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:41.921Z,1520510381.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:42.346Z,1520510382.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:42.371Z,1520510382.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:42.709Z,1520510382.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:42.724Z,1520510382.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:43.101Z,1520510383.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:43.129Z,1520510383.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:43.502Z,1520510383.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:43.521Z,1520510383.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:43.891Z,1520510383.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:43.927Z,1520510383.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:44.288Z,1520510384.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:44.332Z,1520510384.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:44.728Z,1520510384.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:44.744Z,1520510384.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:45.128Z,1520510385.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:45.150Z,1520510385.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:45.499Z,1520510385.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:45.527Z,1520510385.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:45.926Z,1520510385.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:45.946Z,1520510385.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:46.302Z,1520510386.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:46.326Z,1520510386.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:46.696Z,1520510386.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:46.728Z,1520510386.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:47.095Z,1520510387.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:47.111Z,1520510387.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:47.513Z,1520510387.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:47.538Z,1520510387.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:47.901Z,1520510387.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:47.929Z,1520510387.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:48.309Z,1520510388.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:48.345Z,1520510388.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:48.699Z,1520510388.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:48.714Z,1520510388.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:49.095Z,1520510389.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:49.112Z,1520510389.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:49.500Z,1520510389.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:49.515Z,1520510389.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:49.901Z,1520510389.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:49.915Z,1520510389.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:50.296Z,1520510390.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:50.312Z,1520510390.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:50.705Z,1520510390.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:50.721Z,1520510390.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:51.113Z,1520510391.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:51.143Z,1520510391.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:51.502Z,1520510391.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:51.517Z,1520510391.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:51.896Z,1520510391.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:51.912Z,1520510391.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:52.299Z,1520510392.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:52.314Z,1520510392.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:52.697Z,1520510392.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:52.712Z,1520510392.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:53.096Z,1520510393.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:53.115Z,1520510393.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:53.501Z,1520510393.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:53.522Z,1520510393.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:53.897Z,1520510393.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:53.913Z,1520510393.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:54.313Z,1520510394.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:54.343Z,1520510394.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:54.700Z,1520510394.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:54.715Z,1520510394.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:55.088Z,1520510395.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:55.119Z,1520510395.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:55.500Z,1520510395.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:55.516Z,1520510395.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:55.896Z,1520510395.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:55.912Z,1520510395.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:56.294Z,1520510396.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:56.313Z,1520510396.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:56.713Z,1520510396.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:56.744Z,1520510396.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:57.113Z,1520510397.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:57.145Z,1520510397.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:57.509Z,1520510397.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:57.533Z,1520510397.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:57.900Z,1520510397.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:57.915Z,1520510397.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:58.300Z,1520510398.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:58.315Z,1520510398.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:58.702Z,1520510398.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:58.717Z,1520510398.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:59.098Z,1520510399.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:59.113Z,1520510399.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:59.512Z,1520510399.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:59.527Z,1520510399.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T11:59:59.898Z,1520510399.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T11:59:59.922Z,1520510399.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:00.306Z,1520510400.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:00.321Z,1520510400.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:00.701Z,1520510400.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:00.717Z,1520510400.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:01.095Z,1520510401.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:01.115Z,1520510401.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:01.503Z,1520510401.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:01.519Z,1520510401.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:01.904Z,1520510401.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:01.919Z,1520510401.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:02.297Z,1520510402.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:02.313Z,1520510402.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:02.706Z,1520510402.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:02.722Z,1520510402.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:03.110Z,1520510403.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:03.124Z,1520510403.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:03.505Z,1520510403.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:03.521Z,1520510403.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:03.903Z,1520510403.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:03.919Z,1520510403.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:04.303Z,1520510404.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:04.318Z,1520510404.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:04.703Z,1520510404.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:04.719Z,1520510404.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:05.099Z,1520510405.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:05.114Z,1520510405.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:05.506Z,1520510405.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:05.521Z,1520510405.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:05.904Z,1520510405.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:05.927Z,1520510405.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:06.305Z,1520510406.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:06.321Z,1520510406.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:06.702Z,1520510406.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:06.717Z,1520510406.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:07.095Z,1520510407.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:07.114Z,1520510407.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:07.499Z,1520510407.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:07.514Z,1520510407.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:07.896Z,1520510407.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:07.911Z,1520510407.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:08.303Z,1520510408.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:08.319Z,1520510408.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:08.705Z,1520510408.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:08.721Z,1520510408.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:09.109Z,1520510409.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:09.124Z,1520510409.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:09.502Z,1520510409.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:09.518Z,1520510409.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:09.898Z,1520510409.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:09.917Z,1520510409.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:10.305Z,1520510410.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:10.320Z,1520510410.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:10.697Z,1520510410.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:10.712Z,1520510410.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:11.098Z,1520510411.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:11.117Z,1520510411.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:11.509Z,1520510411.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:11.524Z,1520510411.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:11.910Z,1520510411.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:11.925Z,1520510411.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:12.308Z,1520510412.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:12.324Z,1520510412.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:12.693Z,1520510412.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:12.718Z,1520510412.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:13.095Z,1520510413.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:13.117Z,1520510413.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:13.498Z,1520510413.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:13.517Z,1520510413.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:13.896Z,1520510413.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:13.911Z,1520510413.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:14.298Z,1520510414.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:14.318Z,1520510414.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:14.709Z,1520510414.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:14.730Z,1520510414.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:15.110Z,1520510415.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:15.125Z,1520510415.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:15.506Z,1520510415.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:15.530Z,1520510415.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:15.904Z,1520510415.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:15.920Z,1520510415.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:16.300Z,1520510416.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:16.322Z,1520510416.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:16.706Z,1520510416.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:16.721Z,1520510416.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:17.098Z,1520510417.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:17.119Z,1520510417.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:17.514Z,1520510417.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:17.529Z,1520510417.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:17.904Z,1520510417.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:17.926Z,1520510417.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:18.308Z,1520510418.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:18.330Z,1520510418.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:18.704Z,1520510418.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:18.719Z,1520510418.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:19.088Z,1520510419.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:19.118Z,1520510419.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:19.503Z,1520510419.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:19.518Z,1520510419.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:19.901Z,1520510419.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:19.916Z,1520510419.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:20.303Z,1520510420.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:20.322Z,1520510420.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:20.708Z,1520510420.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:20.730Z,1520510420.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:21.113Z,1520510421.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:21.128Z,1520510421.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:21.502Z,1520510421.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:21.530Z,1520510421.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:21.903Z,1520510421.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:21.919Z,1520510421.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:22.291Z,1520510422.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:22.323Z,1520510422.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:22.704Z,1520510422.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:22.720Z,1520510422.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:23.091Z,1520510423.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:23.127Z,1520510423.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:23.514Z,1520510423.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:23.529Z,1520510423.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:23.909Z,1520510423.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:23.926Z,1520510423.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:24.309Z,1520510424.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:24.325Z,1520510424.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:24.692Z,1520510424.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:24.719Z,1520510424.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:25.084Z,1520510425.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:25.119Z,1520510425.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:25.491Z,1520510425.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:25.523Z,1520510425.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:25.887Z,1520510425.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:25.918Z,1520510425.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:26.304Z,1520510426.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:26.365Z,1520510426.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:26.714Z,1520510426.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:26.729Z,1520510426.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:27.116Z,1520510427.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:27.131Z,1520510427.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:27.510Z,1520510427.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:27.525Z,1520510427.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:27.891Z,1520510427.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:27.922Z,1520510427.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:28.287Z,1520510428.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:28.369Z,1520510428.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:28.704Z,1520510428.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:28.719Z,1520510428.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:29.091Z,1520510429.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:29.123Z,1520510429.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:29.511Z,1520510429.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:29.526Z,1520510429.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:29.909Z,1520510429.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:29.925Z,1520510429.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:30.310Z,1520510430.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:30.325Z,1520510430.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:30.691Z,1520510430.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:30.717Z,1520510430.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:31.087Z,1520510431.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:31.122Z,1520510431.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:31.491Z,1520510431.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:31.527Z,1520510431.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:31.904Z,1520510431.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:31.919Z,1520510431.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:32.303Z,1520510432.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:32.326Z,1520510432.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:32.709Z,1520510432.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:32.725Z,1520510432.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:33.114Z,1520510433.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:33.129Z,1520510433.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:33.506Z,1520510433.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:33.530Z,1520510433.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:33.894Z,1520510433.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:33.921Z,1520510433.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:34.291Z,1520510434.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:34.319Z,1520510434.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:37.429Z,1520510437.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:37.445Z,1520510437.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:37.544Z,1520510437.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:37.578Z,1520510437.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:37.937Z,1520510437.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:37.965Z,1520510437.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:38.333Z,1520510438.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:38.348Z,1520510438.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:38.733Z,1520510438.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:38.748Z,1520510438.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:39.122Z,1520510439.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:39.142Z,1520510439.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:39.522Z,1520510439.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:39.537Z,1520510439.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:39.921Z,1520510439.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:39.945Z,1520510439.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:40.327Z,1520510440.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:40.343Z,1520510440.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:40.733Z,1520510440.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:40.749Z,1520510440.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:41.133Z,1520510441.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:41.149Z,1520510441.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:41.533Z,1520510441.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:41.554Z,1520510441.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:41.917Z,1520510441.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:41.940Z,1520510441.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:42.327Z,1520510442.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:42.343Z,1520510442.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:42.725Z,1520510442.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:42.740Z,1520510442.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:43.112Z,1520510443.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:43.139Z,1520510443.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:43.540Z,1520510443.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:43.555Z,1520510443.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:43.938Z,1520510443.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:43.953Z,1520510443.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:44.338Z,1520510444.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:44.353Z,1520510444.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:44.728Z,1520510444.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:44.743Z,1520510444.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:45.115Z,1520510445.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:45.150Z,1520510445.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:45.511Z,1520510445.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:45.548Z,1520510445.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:45.928Z,1520510445.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:45.950Z,1520510445.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:46.315Z,1520510446.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:46.351Z,1520510446.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:46.738Z,1520510446.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:46.754Z,1520510446.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:47.137Z,1520510447.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:47.159Z,1520510447.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:47.537Z,1520510447.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:47.552Z,1520510447.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:47.912Z,1520510447.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:47.940Z,1520510447.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:48.319Z,1520510448.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:48.345Z,1520510448.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:48.715Z,1520510448.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:48.750Z,1520510448.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:49.111Z,1520510449.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:49.138Z,1520510449.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:49.537Z,1520510449.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:49.553Z,1520510449.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:49.935Z,1520510449.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:49.959Z,1520510449.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:50.339Z,1520510450.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:50.354Z,1520510450.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:50.716Z,1520510450.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:50.747Z,1520510450.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:51.119Z,1520510451.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:51.150Z,1520510451.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:51.523Z,1520510451.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:51.558Z,1520510451.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:51.917Z,1520510451.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:51.933Z,1520510451.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:52.323Z,1520510452.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:52.359Z,1520510452.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:52.737Z,1520510452.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:52.771Z,1520510452.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:53.137Z,1520510453.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:53.160Z,1520510453.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:53.537Z,1520510453.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:53.561Z,1520510453.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:53.918Z,1520510453.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:53.936Z,1520510453.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:54.323Z,1520510454.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:54.342Z,1520510454.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:54.725Z,1520510454.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:54.746Z,1520510454.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:55.124Z,1520510455.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:55.139Z,1520510455.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:55.537Z,1520510455.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:55.568Z,1520510455.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:55.933Z,1520510455.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:55.948Z,1520510455.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:56.330Z,1520510456.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:56.345Z,1520510456.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:56.724Z,1520510456.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:56.746Z,1520510456.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:57.126Z,1520510457.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:57.142Z,1520510457.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:57.529Z,1520510457.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:57.544Z,1520510457.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:57.924Z,1520510457.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:57.940Z,1520510457.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:58.323Z,1520510458.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:58.339Z,1520510458.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:58.729Z,1520510458.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:58.745Z,1520510458.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:59.128Z,1520510459.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:59.147Z,1520510459.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:59.530Z,1520510459.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:59.546Z,1520510459.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:00:59.920Z,1520510459.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:00:59.935Z,1520510459.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:00.326Z,1520510460.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:00.346Z,1520510460.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:00.726Z,1520510460.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:00.741Z,1520510460.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:01.127Z,1520510461.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:01.142Z,1520510461.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:01.528Z,1520510461.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:01.543Z,1520510461.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:01.928Z,1520510461.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:01.942Z,1520510461.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:02.329Z,1520510462.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:02.345Z,1520510462.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:02.727Z,1520510462.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:02.742Z,1520510462.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:03.119Z,1520510463.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:03.133Z,1520510463.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:03.519Z,1520510463.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:03.535Z,1520510463.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:03.923Z,1520510463.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:03.938Z,1520510463.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:04.318Z,1520510464.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:04.335Z,1520510464.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:04.729Z,1520510464.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:04.745Z,1520510464.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:05.133Z,1520510465.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:05.149Z,1520510465.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:05.529Z,1520510465.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:05.544Z,1520510465.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:05.926Z,1520510465.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:05.942Z,1520510465.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:06.322Z,1520510466.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:06.341Z,1520510466.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:06.726Z,1520510466.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:06.741Z,1520510466.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:07.128Z,1520510467.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:07.143Z,1520510467.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:07.529Z,1520510467.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:07.550Z,1520510467.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:07.933Z,1520510467.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:07.948Z,1520510467.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:08.329Z,1520510468.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:08.345Z,1520510468.345 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:08.345Z,1520510468.345 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86
2018-03-08T12:01:08.345Z,1520510468.345 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T12:01:08.347Z,1520510468.347 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:08.347Z,1520510468.347 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86
2018-03-08T12:01:08.347Z,1520510468.347 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T12:01:08.349Z,1520510468.349 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:08.349Z,1520510468.349 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 86
2018-03-08T12:01:08.349Z,1520510468.349 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T12:01:08.382Z,1520510468.382 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T12:01:08.382Z,1520510468.382 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T12:01:08.382Z,1520510468.382 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T12:01:08.718Z,1520510468.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:08.763Z,1520510468.763 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T12:01:08.763Z,1520510468.763 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86
2018-03-08T12:01:08.764Z,1520510468.764 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T12:01:08.764Z,1520510468.764 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86
2018-03-08T12:01:08.769Z,1520510468.769 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T12:01:08.769Z,1520510468.769 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 86
2018-03-08T12:01:09.110Z,1520510469.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:09.136Z,1520510469.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T12:01:09.136Z,1520510469.136 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:01:09.136Z,1520510469.136 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:01:09.137Z,1520510469.137 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T12:01:09.137Z,1520510469.137 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:01:09.138Z,1520510469.138 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:01:09.138Z,1520510469.138 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T12:01:09.138Z,1520510469.138 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:01:09.139Z,1520510469.139 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:01:09.519Z,1520510469.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:09.542Z,1520510469.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T12:01:09.543Z,1520510469.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:09.932Z,1520510469.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:09.947Z,1520510469.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T12:01:09.948Z,1520510469.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:10.310Z,1520510470.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:10.342Z,1520510470.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T12:01:10.343Z,1520510470.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:10.737Z,1520510470.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:10.752Z,1520510470.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T12:01:10.753Z,1520510470.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:11.136Z,1520510471.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:11.159Z,1520510471.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T12:01:11.160Z,1520510471.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:11.536Z,1520510471.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:11.551Z,1520510471.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T12:01:11.551Z,1520510471.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:11.925Z,1520510471.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:11.940Z,1520510471.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T12:01:11.941Z,1520510471.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:12.319Z,1520510472.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:12.340Z,1520510472.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T12:01:12.341Z,1520510472.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:12.724Z,1520510472.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:12.738Z,1520510472.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T12:01:12.739Z,1520510472.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:13.111Z,1520510473.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:13.146Z,1520510473.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T12:01:13.147Z,1520510473.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:13.537Z,1520510473.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:13.558Z,1520510473.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T12:01:13.559Z,1520510473.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:13.942Z,1520510473.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:13.956Z,1520510473.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T12:01:13.957Z,1520510473.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:14.341Z,1520510474.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:14.356Z,1520510474.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T12:01:14.357Z,1520510474.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:14.718Z,1520510474.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:14.744Z,1520510474.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T12:01:14.745Z,1520510474.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:15.114Z,1520510475.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:15.140Z,1520510475.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T12:01:15.141Z,1520510475.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:15.519Z,1520510475.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:15.546Z,1520510475.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T12:01:15.547Z,1520510475.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:15.911Z,1520510475.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:15.943Z,1520510475.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T12:01:15.943Z,1520510475.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:16.314Z,1520510476.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:16.345Z,1520510476.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T12:01:16.346Z,1520510476.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:16.743Z,1520510476.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:16.762Z,1520510476.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T12:01:16.763Z,1520510476.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:17.138Z,1520510477.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:17.152Z,1520510477.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T12:01:17.153Z,1520510477.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:17.520Z,1520510477.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:17.550Z,1520510477.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T12:01:17.551Z,1520510477.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:17.919Z,1520510477.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:17.946Z,1520510477.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T12:01:17.947Z,1520510477.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:18.315Z,1520510478.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:18.350Z,1520510478.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T12:01:18.351Z,1520510478.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:18.711Z,1520510478.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:18.747Z,1520510478.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T12:01:18.748Z,1520510478.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:19.119Z,1520510479.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:19.145Z,1520510479.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T12:01:19.146Z,1520510479.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:19.538Z,1520510479.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:19.553Z,1520510479.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T12:01:19.554Z,1520510479.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:19.940Z,1520510479.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:19.954Z,1520510479.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T12:01:19.955Z,1520510479.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:20.342Z,1520510480.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:20.362Z,1520510480.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T12:01:20.363Z,1520510480.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:20.719Z,1520510480.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:20.744Z,1520510480.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T12:01:20.745Z,1520510480.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:21.110Z,1520510481.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:21.146Z,1520510481.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T12:01:21.147Z,1520510481.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:21.520Z,1520510481.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:21.554Z,1520510481.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T12:01:21.555Z,1520510481.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:21.923Z,1520510481.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:21.950Z,1520510481.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T12:01:21.951Z,1520510481.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:22.314Z,1520510482.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:22.345Z,1520510482.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T12:01:22.346Z,1520510482.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:22.743Z,1520510482.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:22.762Z,1520510482.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T12:01:22.763Z,1520510482.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:23.133Z,1520510483.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:23.155Z,1520510483.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T12:01:23.156Z,1520510483.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:23.521Z,1520510483.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:23.555Z,1520510483.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T12:01:23.556Z,1520510483.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:23.920Z,1520510483.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:23.947Z,1520510483.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T12:01:23.948Z,1520510483.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:24.315Z,1520510484.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:24.343Z,1520510484.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T12:01:24.344Z,1520510484.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:24.719Z,1520510484.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:24.750Z,1520510484.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T12:01:24.751Z,1520510484.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:25.119Z,1520510485.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:25.156Z,1520510485.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T12:01:25.157Z,1520510485.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:25.533Z,1520510485.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:25.556Z,1520510485.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T12:01:25.557Z,1520510485.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:25.937Z,1520510485.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:25.952Z,1520510485.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T12:01:25.953Z,1520510485.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:26.344Z,1520510486.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:26.359Z,1520510486.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T12:01:26.360Z,1520510486.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:26.715Z,1520510486.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:26.750Z,1520510486.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T12:01:26.751Z,1520510486.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:27.115Z,1520510487.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:27.153Z,1520510487.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T12:01:27.154Z,1520510487.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:27.519Z,1520510487.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:27.550Z,1520510487.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T12:01:27.551Z,1520510487.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:27.914Z,1520510487.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:27.950Z,1520510487.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T12:01:27.951Z,1520510487.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:28.326Z,1520510488.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:28.341Z,1520510488.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T12:01:28.342Z,1520510488.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:28.737Z,1520510488.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:28.768Z,1520510488.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:29.133Z,1520510489.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:29.161Z,1520510489.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:29.537Z,1520510489.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:29.570Z,1520510489.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:29.925Z,1520510489.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:29.946Z,1520510489.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:30.327Z,1520510490.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:30.342Z,1520510490.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:30.727Z,1520510490.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:30.742Z,1520510490.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:31.115Z,1520510491.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:31.142Z,1520510491.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:31.536Z,1520510491.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:31.552Z,1520510491.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:31.937Z,1520510491.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:31.952Z,1520510491.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:32.338Z,1520510492.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:32.353Z,1520510492.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:32.728Z,1520510492.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:32.743Z,1520510492.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:33.110Z,1520510493.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:33.143Z,1520510493.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:33.512Z,1520510493.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:33.543Z,1520510493.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:33.937Z,1520510493.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:33.953Z,1520510493.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:34.326Z,1520510494.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:34.342Z,1520510494.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:37.433Z,1520510497.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:37.450Z,1520510497.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:37.561Z,1520510497.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:37.602Z,1520510497.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:37.926Z,1520510497.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:37.941Z,1520510497.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:38.299Z,1520510498.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:38.335Z,1520510498.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:38.700Z,1520510498.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:38.730Z,1520510498.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:39.102Z,1520510499.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:39.138Z,1520510499.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:39.517Z,1520510499.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:39.544Z,1520510499.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:39.917Z,1520510499.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:39.943Z,1520510499.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:40.317Z,1520510500.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:40.344Z,1520510500.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:40.699Z,1520510500.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:40.713Z,1520510500.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:41.099Z,1520510501.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:41.118Z,1520510501.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:41.513Z,1520510501.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:41.557Z,1520510501.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:41.910Z,1520510501.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:41.926Z,1520510501.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:42.310Z,1520510502.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:42.334Z,1520510502.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:42.720Z,1520510502.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:42.747Z,1520510502.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:43.121Z,1520510503.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:43.137Z,1520510503.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:43.522Z,1520510503.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:43.538Z,1520510503.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:43.899Z,1520510503.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:43.925Z,1520510503.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:44.299Z,1520510504.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:44.330Z,1520510504.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:44.710Z,1520510504.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:44.729Z,1520510504.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:45.099Z,1520510505.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:45.131Z,1520510505.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:45.518Z,1520510505.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:45.534Z,1520510505.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:45.926Z,1520510505.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:45.941Z,1520510505.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:45.954Z,1520510505.954 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T12:01:46.322Z,1520510506.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:46.342Z,1520510506.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:46.695Z,1520510506.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:46.725Z,1520510506.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:47.096Z,1520510507.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:47.127Z,1520510507.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:47.502Z,1520510507.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:47.535Z,1520510507.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:47.895Z,1520510507.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:47.938Z,1520510507.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:48.301Z,1520510508.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:48.335Z,1520510508.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:48.709Z,1520510508.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:48.736Z,1520510508.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:49.109Z,1520510509.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:49.143Z,1520510509.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:49.521Z,1520510509.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:49.542Z,1520510509.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:49.899Z,1520510509.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:49.934Z,1520510509.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:50.299Z,1520510510.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:50.325Z,1520510510.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:50.699Z,1520510510.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:50.738Z,1520510510.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:51.102Z,1520510511.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:51.139Z,1520510511.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:51.527Z,1520510511.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:51.542Z,1520510511.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:51.913Z,1520510511.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:51.939Z,1520510511.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:52.309Z,1520510512.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:52.335Z,1520510512.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:52.699Z,1520510512.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:52.713Z,1520510512.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:53.103Z,1520510513.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:53.119Z,1520510513.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:53.499Z,1520510513.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:53.519Z,1520510513.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:53.903Z,1520510513.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:53.918Z,1520510513.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:54.304Z,1520510514.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:54.320Z,1520510514.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:54.717Z,1520510514.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:54.750Z,1520510514.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:55.114Z,1520510515.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:55.144Z,1520510515.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:55.517Z,1520510515.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:55.549Z,1520510515.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:55.908Z,1520510515.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:55.923Z,1520510515.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:56.296Z,1520510516.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:56.311Z,1520510516.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:56.699Z,1520510516.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:56.722Z,1520510516.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:57.096Z,1520510517.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:57.111Z,1520510517.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:57.509Z,1520510517.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:57.524Z,1520510517.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:57.913Z,1520510517.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:57.928Z,1520510517.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:58.313Z,1520510518.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:58.328Z,1520510518.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:58.700Z,1520510518.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:58.715Z,1520510518.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:59.093Z,1520510519.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:59.147Z,1520510519.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:59.499Z,1520510519.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:59.522Z,1520510519.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:01:59.902Z,1520510519.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:01:59.917Z,1520510519.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:00.299Z,1520510520.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:00.318Z,1520510520.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:00.713Z,1520510520.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:00.729Z,1520510520.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:01.144Z,1520510521.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:01.191Z,1520510521.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:01.510Z,1520510521.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:01.531Z,1520510521.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:01.911Z,1520510521.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:01.949Z,1520510521.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:02.307Z,1520510522.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:02.322Z,1520510522.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:02.704Z,1520510522.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:02.719Z,1520510522.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:03.103Z,1520510523.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:03.123Z,1520510523.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:03.521Z,1520510523.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:03.552Z,1520510523.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:03.917Z,1520510523.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:03.950Z,1520510523.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:04.321Z,1520510524.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:04.357Z,1520510524.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:04.713Z,1520510524.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:04.727Z,1520510524.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:05.110Z,1520510525.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:05.126Z,1520510525.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:05.511Z,1520510525.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:05.527Z,1520510525.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:05.913Z,1520510525.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:05.927Z,1520510525.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:06.310Z,1520510526.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:06.326Z,1520510526.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:06.713Z,1520510526.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:06.734Z,1520510526.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:07.117Z,1520510527.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:07.132Z,1520510527.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:07.510Z,1520510527.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:07.537Z,1520510527.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:07.907Z,1520510527.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:07.922Z,1520510527.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:08.315Z,1520510528.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:08.330Z,1520510528.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:08.709Z,1520510528.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:08.725Z,1520510528.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:09.112Z,1520510529.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:09.127Z,1520510529.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:09.518Z,1520510529.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:09.533Z,1520510529.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:09.914Z,1520510529.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:09.934Z,1520510529.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:10.318Z,1520510530.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:10.333Z,1520510530.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:10.695Z,1520510530.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:10.732Z,1520510530.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:11.095Z,1520510531.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:11.123Z,1520510531.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:11.512Z,1520510531.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:11.535Z,1520510531.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:11.912Z,1520510531.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:11.928Z,1520510531.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:12.296Z,1520510532.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:12.327Z,1520510532.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:12.721Z,1520510532.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:12.743Z,1520510532.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:13.124Z,1520510533.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:13.140Z,1520510533.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:13.518Z,1520510533.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:13.534Z,1520510533.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:13.911Z,1520510533.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:13.930Z,1520510533.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:14.312Z,1520510534.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:14.327Z,1520510534.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:14.712Z,1520510534.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:14.727Z,1520510534.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:15.098Z,1520510535.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:15.131Z,1520510535.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:15.522Z,1520510535.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:15.538Z,1520510535.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:15.917Z,1520510535.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:15.933Z,1520510535.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:16.313Z,1520510536.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:16.336Z,1520510536.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:16.695Z,1520510536.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:16.721Z,1520510536.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:17.096Z,1520510537.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:17.130Z,1520510537.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:17.499Z,1520510537.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:17.531Z,1520510537.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:17.895Z,1520510537.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:17.922Z,1520510537.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:18.299Z,1520510538.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:18.327Z,1520510538.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:18.717Z,1520510538.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:18.733Z,1520510538.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:19.122Z,1520510539.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:19.137Z,1520510539.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:19.514Z,1520510539.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:19.535Z,1520510539.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:19.899Z,1520510539.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:19.935Z,1520510539.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:20.302Z,1520510540.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:20.330Z,1520510540.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:20.703Z,1520510540.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:20.730Z,1520510540.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:21.098Z,1520510541.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:21.131Z,1520510541.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:21.520Z,1520510541.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:21.554Z,1520510541.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:21.921Z,1520510541.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:21.936Z,1520510541.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:22.317Z,1520510542.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:22.332Z,1520510542.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:22.699Z,1520510542.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:22.731Z,1520510542.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:23.093Z,1520510543.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:23.117Z,1520510543.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:23.503Z,1520510543.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:23.534Z,1520510543.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:23.903Z,1520510543.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:23.934Z,1520510543.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:24.303Z,1520510544.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:24.334Z,1520510544.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:24.726Z,1520510544.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:24.741Z,1520510544.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:25.121Z,1520510545.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:25.145Z,1520510545.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:25.509Z,1520510545.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:25.544Z,1520510545.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:25.902Z,1520510545.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:25.934Z,1520510545.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:26.302Z,1520510546.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:26.334Z,1520510546.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:26.703Z,1520510546.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:26.734Z,1520510546.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:27.098Z,1520510547.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:27.134Z,1520510547.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:27.522Z,1520510547.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:27.538Z,1520510547.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:27.910Z,1520510547.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:27.947Z,1520510547.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:28.321Z,1520510548.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:28.337Z,1520510548.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:28.699Z,1520510548.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:28.737Z,1520510548.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:29.093Z,1520510549.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:29.108Z,1520510549.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:29.502Z,1520510549.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:29.534Z,1520510549.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:29.903Z,1520510549.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:29.919Z,1520510549.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:30.303Z,1520510550.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:30.339Z,1520510550.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:30.713Z,1520510550.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:30.749Z,1520510550.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:31.113Z,1520510551.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:31.127Z,1520510551.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:31.517Z,1520510551.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:31.550Z,1520510551.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:31.903Z,1520510551.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:31.923Z,1520510551.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:32.303Z,1520510552.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:32.318Z,1520510552.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:32.706Z,1520510552.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:32.721Z,1520510552.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:33.103Z,1520510553.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:33.126Z,1520510553.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:33.517Z,1520510553.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:33.532Z,1520510553.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:33.909Z,1520510553.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:33.925Z,1520510553.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:34.309Z,1520510554.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:34.325Z,1520510554.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:34.708Z,1520510554.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:34.723Z,1520510554.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:37.999Z,1520510557.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:38.015Z,1520510558.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:38.108Z,1520510558.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:38.123Z,1520510558.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:38.492Z,1520510558.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:38.507Z,1520510558.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:38.877Z,1520510558.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:38.903Z,1520510558.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:39.292Z,1520510559.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:39.314Z,1520510559.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:39.668Z,1520510559.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:39.684Z,1520510559.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:40.102Z,1520510560.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:40.174Z,1520510560.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:40.467Z,1520510560.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:40.483Z,1520510560.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:40.870Z,1520510560.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:40.891Z,1520510560.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:41.268Z,1520510561.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:41.283Z,1520510561.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:41.681Z,1520510561.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:41.717Z,1520510561.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:42.089Z,1520510562.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:42.120Z,1520510562.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:42.473Z,1520510562.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:42.494Z,1520510562.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:42.871Z,1520510562.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:42.887Z,1520510562.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:43.268Z,1520510563.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:43.293Z,1520510563.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:43.677Z,1520510563.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:43.691Z,1520510563.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:44.072Z,1520510564.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:44.087Z,1520510564.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:44.485Z,1520510564.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:44.517Z,1520510564.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:44.877Z,1520510564.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:44.891Z,1520510564.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:45.281Z,1520510565.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:45.297Z,1520510565.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:45.674Z,1520510565.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:45.689Z,1520510565.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:46.075Z,1520510566.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:46.090Z,1520510566.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:46.474Z,1520510566.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:46.494Z,1520510566.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:46.879Z,1520510566.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:46.894Z,1520510566.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:47.275Z,1520510567.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:47.289Z,1520510567.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:47.681Z,1520510567.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:47.696Z,1520510567.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:48.082Z,1520510568.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:48.097Z,1520510568.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:48.493Z,1520510568.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:48.522Z,1520510568.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:48.874Z,1520510568.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:48.889Z,1520510568.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:49.275Z,1520510569.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:49.290Z,1520510569.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:49.672Z,1520510569.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:49.688Z,1520510569.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:50.076Z,1520510570.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:50.091Z,1520510570.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:50.481Z,1520510570.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:50.497Z,1520510570.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:50.881Z,1520510570.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:50.895Z,1520510570.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:51.281Z,1520510571.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:51.297Z,1520510571.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:51.679Z,1520510571.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:51.695Z,1520510571.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:52.075Z,1520510572.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:52.089Z,1520510572.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:52.473Z,1520510572.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:52.495Z,1520510572.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:52.869Z,1520510572.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:52.897Z,1520510572.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:53.279Z,1520510573.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:53.293Z,1520510573.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:53.681Z,1520510573.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:53.702Z,1520510573.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:54.081Z,1520510574.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:54.096Z,1520510574.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:54.481Z,1520510574.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:54.495Z,1520510574.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:54.878Z,1520510574.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:54.899Z,1520510574.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:55.275Z,1520510575.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:55.290Z,1520510575.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:55.678Z,1520510575.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:55.693Z,1520510575.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:56.071Z,1520510576.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:56.090Z,1520510576.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:56.482Z,1520510576.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:56.497Z,1520510576.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:56.881Z,1520510576.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:56.895Z,1520510576.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:57.281Z,1520510577.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:57.297Z,1520510577.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:57.672Z,1520510577.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:57.688Z,1520510577.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:58.079Z,1520510578.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:58.094Z,1520510578.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:58.476Z,1520510578.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:58.491Z,1520510578.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:58.875Z,1520510578.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:58.891Z,1520510578.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:59.271Z,1520510579.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:59.287Z,1520510579.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:02:59.682Z,1520510579.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:02:59.722Z,1520510579.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:00.081Z,1520510580.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:00.097Z,1520510580.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:00.481Z,1520510580.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:00.498Z,1520510580.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:00.875Z,1520510580.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:00.891Z,1520510580.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:01.272Z,1520510581.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:01.296Z,1520510581.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:01.677Z,1520510581.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:01.692Z,1520510581.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:02.075Z,1520510582.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:02.099Z,1520510582.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:02.484Z,1520510582.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:02.499Z,1520510582.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:02.886Z,1520510582.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:02.900Z,1520510582.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:03.285Z,1520510583.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:03.300Z,1520510583.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:03.673Z,1520510583.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:03.688Z,1520510583.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:04.084Z,1520510584.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:04.099Z,1520510584.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:04.475Z,1520510584.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:04.490Z,1520510584.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:04.869Z,1520510584.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:04.897Z,1520510584.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:05.278Z,1520510585.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:05.293Z,1520510585.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:05.688Z,1520510585.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:05.703Z,1520510585.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:06.089Z,1520510586.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:06.104Z,1520510586.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:06.490Z,1520510586.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:06.510Z,1520510586.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:06.859Z,1520510586.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:06.886Z,1520510586.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:07.263Z,1520510587.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:07.290Z,1520510587.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:07.675Z,1520510587.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:07.691Z,1520510587.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:08.061Z,1520510588.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:08.089Z,1520510588.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:08.489Z,1520510588.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:08.504Z,1520510588.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:08.889Z,1520510588.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:08.904Z,1520510588.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:09.275Z,1520510589.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:09.298Z,1520510589.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:09.673Z,1520510589.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:09.691Z,1520510589.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:10.063Z,1520510590.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:10.099Z,1520510590.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:10.460Z,1520510590.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:10.492Z,1520510590.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:10.871Z,1520510590.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:10.897Z,1520510590.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:11.261Z,1520510591.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:11.294Z,1520510591.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:11.685Z,1520510591.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:11.701Z,1520510591.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:12.083Z,1520510592.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:12.104Z,1520510592.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:12.482Z,1520510592.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:12.497Z,1520510592.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:12.865Z,1520510592.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:12.899Z,1520510592.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:13.271Z,1520510593.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:13.297Z,1520510593.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:13.663Z,1520510593.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:13.694Z,1520510593.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:14.059Z,1520510594.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:14.094Z,1520510594.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:14.485Z,1520510594.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:14.501Z,1520510594.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:14.887Z,1520510594.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:14.901Z,1520510594.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:15.277Z,1520510595.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:15.300Z,1520510595.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:15.666Z,1520510595.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:15.693Z,1520510595.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:16.062Z,1520510596.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:16.095Z,1520510596.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:16.463Z,1520510596.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:16.494Z,1520510596.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:16.863Z,1520510596.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:16.898Z,1520510596.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:17.261Z,1520510597.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:17.295Z,1520510597.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:17.686Z,1520510597.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:17.707Z,1520510597.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:18.089Z,1520510598.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:18.104Z,1520510598.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:18.486Z,1520510598.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:18.501Z,1520510598.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:18.859Z,1520510598.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:18.894Z,1520510598.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:19.264Z,1520510599.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:19.298Z,1520510599.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:19.667Z,1520510599.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:19.695Z,1520510599.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:20.060Z,1520510600.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:20.087Z,1520510600.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:20.489Z,1520510600.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:20.505Z,1520510600.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:20.886Z,1520510600.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:20.906Z,1520510600.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:21.273Z,1520510601.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:21.307Z,1520510601.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:21.667Z,1520510601.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:21.698Z,1520510601.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:22.066Z,1520510602.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:22.102Z,1520510602.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:22.461Z,1520510602.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:22.485Z,1520510602.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:22.870Z,1520510602.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:22.902Z,1520510602.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:23.263Z,1520510603.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:23.277Z,1520510603.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:23.690Z,1520510603.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:23.705Z,1520510603.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:24.081Z,1520510604.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:24.103Z,1520510604.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:24.493Z,1520510604.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:24.508Z,1520510604.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:24.860Z,1520510604.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:24.887Z,1520510604.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:25.273Z,1520510605.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:25.288Z,1520510605.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:25.672Z,1520510605.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:25.687Z,1520510605.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:26.066Z,1520510606.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:26.081Z,1520510606.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:26.485Z,1520510606.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:26.509Z,1520510606.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:26.881Z,1520510606.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:26.910Z,1520510606.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:27.273Z,1520510607.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:27.289Z,1520510607.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:27.672Z,1520510607.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:27.687Z,1520510607.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:28.072Z,1520510608.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:28.087Z,1520510608.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:28.468Z,1520510608.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:28.487Z,1520510608.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:28.872Z,1520510608.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:28.887Z,1520510608.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:29.272Z,1520510609.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:29.287Z,1520510609.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:29.674Z,1520510609.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:29.690Z,1520510609.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:30.089Z,1520510610.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:30.112Z,1520510610.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:30.477Z,1520510610.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:30.516Z,1520510610.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:30.866Z,1520510610.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:30.885Z,1520510610.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:31.272Z,1520510611.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:31.289Z,1520510611.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:31.677Z,1520510611.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:31.692Z,1520510611.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:32.073Z,1520510612.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:32.088Z,1520510612.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:32.485Z,1520510612.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:32.516Z,1520510612.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:32.876Z,1520510612.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:32.891Z,1520510612.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:33.275Z,1520510613.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:33.303Z,1520510613.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:33.675Z,1520510613.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:33.690Z,1520510613.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:34.076Z,1520510614.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:34.091Z,1520510614.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:34.094Z,1520510614.094 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T11:58:33.8Z
2018-03-08T12:03:34.094Z,1520510614.094 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T12:03:34.094Z,1520510614.094 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T12:03:34.471Z,1520510614.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:34.487Z,1520510614.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:34.982Z,1520510614.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:34.999Z,1520510614.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:37.969Z,1520510617.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:37.984Z,1520510617.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:38.110Z,1520510618.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:38.139Z,1520510618.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:38.413Z,1520510618.413 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0100.lzma
2018-03-08T12:03:38.459Z,1520510618.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:38.487Z,1520510618.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:38.851Z,1520510618.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:38.882Z,1520510618.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:39.211Z,1520510619.211 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0100.lzma.bak
2018-03-08T12:03:39.211Z,1520510619.211 [DataOverHttps](INFO): SBD MOMSN=7985487
2018-03-08T12:03:39.250Z,1520510619.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:39.283Z,1520510619.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:39.832Z,1520510619.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:39.854Z,1520510619.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:40.040Z,1520510620.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:40.059Z,1520510620.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:43.994Z,1520510623.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:44.052Z,1520510624.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:44.148Z,1520510624.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:44.168Z,1520510624.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:44.555Z,1520510624.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:44.575Z,1520510624.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:44.928Z,1520510624.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:44.962Z,1520510624.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:45.344Z,1520510625.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:45.360Z,1520510625.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:45.766Z,1520510625.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:45.802Z,1520510625.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:46.140Z,1520510626.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:46.162Z,1520510626.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:49.355Z,1520510629.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:49.375Z,1520510629.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:49.497Z,1520510629.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:49.530Z,1520510629.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:49.825Z,1520510629.825 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0101.lzma
2018-03-08T12:03:49.866Z,1520510629.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:49.893Z,1520510629.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:50.242Z,1520510630.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:50.274Z,1520510630.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:50.619Z,1520510630.619 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0101.lzma.bak
2018-03-08T12:03:50.619Z,1520510630.619 [DataOverHttps](INFO): SBD MOMSN=7985489
2018-03-08T12:03:50.654Z,1520510630.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:03:50.717Z,1520510630.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:51.231Z,1520510631.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:51.234Z,1520510631.234 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T12:03:51.234Z,1520510631.234 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T12:03:51.234Z,1520510631.234 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T12:03:51.482Z,1520510631.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:51.885Z,1520510631.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:54.977Z,1520510634.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:55.115Z,1520510635.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:55.451Z,1520510635.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:55.844Z,1520510635.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:56.245Z,1520510636.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:56.656Z,1520510636.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:57.077Z,1520510637.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:57.452Z,1520510637.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:57.855Z,1520510637.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:58.247Z,1520510638.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:58.647Z,1520510638.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:59.049Z,1520510639.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:59.460Z,1520510639.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:03:59.849Z,1520510639.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:00.260Z,1520510640.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:00.649Z,1520510640.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:01.044Z,1520510641.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:01.449Z,1520510641.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:01.845Z,1520510641.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:02.243Z,1520510642.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:02.658Z,1520510642.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:03.056Z,1520510643.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:03.463Z,1520510643.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:03.859Z,1520510643.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:04.250Z,1520510644.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:04.651Z,1520510644.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:05.046Z,1520510645.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:05.462Z,1520510645.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:05.863Z,1520510645.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:06.262Z,1520510646.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:06.652Z,1520510646.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:07.043Z,1520510647.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:07.446Z,1520510647.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:07.847Z,1520510647.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:08.254Z,1520510648.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:08.656Z,1520510648.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:09.055Z,1520510649.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:09.456Z,1520510649.456 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:09.456Z,1520510649.456 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87
2018-03-08T12:04:09.456Z,1520510649.456 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T12:04:09.458Z,1520510649.458 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:09.458Z,1520510649.458 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87
2018-03-08T12:04:09.458Z,1520510649.458 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T12:04:09.460Z,1520510649.460 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:09.460Z,1520510649.460 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 87
2018-03-08T12:04:09.460Z,1520510649.460 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T12:04:09.483Z,1520510649.483 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T12:04:09.484Z,1520510649.484 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T12:04:09.484Z,1520510649.484 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T12:04:09.863Z,1520510649.863 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T12:04:09.863Z,1520510649.863 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87
2018-03-08T12:04:09.864Z,1520510649.864 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T12:04:09.864Z,1520510649.864 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87
2018-03-08T12:04:09.865Z,1520510649.865 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T12:04:09.865Z,1520510649.865 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 87
2018-03-08T12:04:10.257Z,1520510650.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T12:04:10.257Z,1520510650.257 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:04:10.258Z,1520510650.258 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:04:10.258Z,1520510650.258 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T12:04:10.259Z,1520510650.259 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:04:10.259Z,1520510650.259 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:04:10.259Z,1520510650.259 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T12:04:10.260Z,1520510650.260 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:04:10.260Z,1520510650.260 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:04:10.658Z,1520510650.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T12:04:10.659Z,1520510650.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:11.046Z,1520510651.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T12:04:11.047Z,1520510651.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:11.467Z,1520510651.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T12:04:11.467Z,1520510651.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:11.863Z,1520510651.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T12:04:11.864Z,1520510651.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:12.262Z,1520510652.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T12:04:12.263Z,1520510652.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:12.649Z,1520510652.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T12:04:12.650Z,1520510652.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:13.049Z,1520510653.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T12:04:13.050Z,1520510653.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:13.453Z,1520510653.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T12:04:13.454Z,1520510653.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:13.824Z,1520510653.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:04:13.856Z,1520510653.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T12:04:13.857Z,1520510653.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:14.221Z,1520510654.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:04:14.247Z,1520510654.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T12:04:14.249Z,1520510654.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:14.642Z,1520510654.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:04:14.657Z,1520510654.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T12:04:14.658Z,1520510654.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:15.042Z,1520510655.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:04:15.057Z,1520510655.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T12:04:15.058Z,1520510655.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:15.441Z,1520510655.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:04:15.457Z,1520510655.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T12:04:15.458Z,1520510655.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:15.823Z,1520510655.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:04:15.848Z,1520510655.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T12:04:15.849Z,1520510655.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:16.223Z,1520510656.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:04:16.262Z,1520510656.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T12:04:16.263Z,1520510656.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:16.627Z,1520510656.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:04:16.654Z,1520510656.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T12:04:16.655Z,1520510656.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:17.023Z,1520510657.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:04:17.049Z,1520510657.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T12:04:17.050Z,1520510657.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:17.460Z,1520510657.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T12:04:17.461Z,1520510657.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:17.856Z,1520510657.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T12:04:17.857Z,1520510657.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:18.261Z,1520510658.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T12:04:18.262Z,1520510658.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:18.649Z,1520510658.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T12:04:18.650Z,1520510658.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:19.051Z,1520510659.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T12:04:19.052Z,1520510659.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:19.446Z,1520510659.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T12:04:19.447Z,1520510659.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:19.850Z,1520510659.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T12:04:19.851Z,1520510659.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:20.249Z,1520510660.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T12:04:20.250Z,1520510660.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:20.657Z,1520510660.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T12:04:20.658Z,1520510660.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:21.070Z,1520510661.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T12:04:21.071Z,1520510661.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:21.452Z,1520510661.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T12:04:21.453Z,1520510661.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:21.846Z,1520510661.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T12:04:21.847Z,1520510661.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:22.258Z,1520510662.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T12:04:22.259Z,1520510662.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:22.647Z,1520510662.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T12:04:22.648Z,1520510662.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:23.053Z,1520510663.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T12:04:23.054Z,1520510663.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:23.466Z,1520510663.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T12:04:23.467Z,1520510663.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:23.857Z,1520510663.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T12:04:23.858Z,1520510663.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:24.256Z,1520510664.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T12:04:24.257Z,1520510664.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:24.655Z,1520510664.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T12:04:24.656Z,1520510664.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:25.053Z,1520510665.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T12:04:25.054Z,1520510665.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:25.446Z,1520510665.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T12:04:25.447Z,1520510665.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:25.855Z,1520510665.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T12:04:25.856Z,1520510665.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:26.251Z,1520510666.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T12:04:26.252Z,1520510666.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:26.658Z,1520510666.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T12:04:26.659Z,1520510666.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:27.078Z,1520510667.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T12:04:27.079Z,1520510667.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:27.465Z,1520510667.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T12:04:27.466Z,1520510667.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:27.858Z,1520510667.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T12:04:27.859Z,1520510667.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:28.259Z,1520510668.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T12:04:28.261Z,1520510668.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:28.655Z,1520510668.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T12:04:28.656Z,1520510668.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:29.061Z,1520510669.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T12:04:29.062Z,1520510669.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:29.471Z,1520510669.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:29.871Z,1520510669.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:30.260Z,1520510670.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:30.639Z,1520510670.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:31.063Z,1520510671.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:31.471Z,1520510671.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:31.856Z,1520510671.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:32.246Z,1520510672.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:32.682Z,1520510672.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:33.053Z,1520510673.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:33.455Z,1520510673.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:33.847Z,1520510673.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:34.333Z,1520510674.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:34.651Z,1520510674.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:35.050Z,1520510675.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:35.455Z,1520510675.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:35.852Z,1520510675.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:36.264Z,1520510676.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:36.652Z,1520510676.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:37.047Z,1520510677.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:37.449Z,1520510677.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:37.845Z,1520510677.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:38.255Z,1520510678.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:38.667Z,1520510678.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:39.061Z,1520510679.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:39.466Z,1520510679.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:39.847Z,1520510679.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:40.248Z,1520510680.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:40.651Z,1520510680.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:41.051Z,1520510681.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:41.458Z,1520510681.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:41.859Z,1520510681.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:42.267Z,1520510682.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:42.650Z,1520510682.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:43.055Z,1520510683.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:43.454Z,1520510683.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:43.851Z,1520510683.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:44.250Z,1520510684.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:44.659Z,1520510684.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:45.060Z,1520510685.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:45.456Z,1520510685.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:45.855Z,1520510685.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:46.246Z,1520510686.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:46.651Z,1520510686.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:47.051Z,1520510687.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:47.457Z,1520510687.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:47.867Z,1520510687.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:48.266Z,1520510688.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:48.650Z,1520510688.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:49.055Z,1520510689.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:49.451Z,1520510689.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:49.851Z,1520510689.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:50.255Z,1520510690.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:50.666Z,1520510690.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:51.059Z,1520510691.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:51.466Z,1520510691.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:51.851Z,1520510691.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:54.960Z,1520510694.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:55.094Z,1520510695.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:55.461Z,1520510695.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:55.861Z,1520510695.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:56.264Z,1520510696.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:56.652Z,1520510696.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:57.050Z,1520510697.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:57.455Z,1520510697.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:57.850Z,1520510697.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:58.254Z,1520510698.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:58.667Z,1520510698.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:59.078Z,1520510699.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:59.465Z,1520510699.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:04:59.855Z,1520510699.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:00.255Z,1520510700.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:00.654Z,1520510700.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:01.055Z,1520510701.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:01.465Z,1520510701.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:01.860Z,1520510701.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:02.264Z,1520510702.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:02.655Z,1520510702.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:03.054Z,1520510703.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:03.457Z,1520510703.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:03.859Z,1520510703.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:04.258Z,1520510704.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:04.665Z,1520510704.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:05.070Z,1520510705.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:05.464Z,1520510705.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:05.855Z,1520510705.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:06.256Z,1520510706.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:06.659Z,1520510706.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:07.056Z,1520510707.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:07.462Z,1520510707.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:07.868Z,1520510707.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:08.270Z,1520510708.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:08.656Z,1520510708.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:09.057Z,1520510709.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:09.456Z,1520510709.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:09.859Z,1520510709.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:10.263Z,1520510710.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:10.665Z,1520510710.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:11.070Z,1520510711.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:11.463Z,1520510711.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:11.863Z,1520510711.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:12.266Z,1520510712.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:12.642Z,1520510712.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:13.043Z,1520510713.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:13.469Z,1520510713.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:13.874Z,1520510713.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:14.272Z,1520510714.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:14.650Z,1520510714.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:15.049Z,1520510715.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:15.448Z,1520510715.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:15.874Z,1520510715.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:16.247Z,1520510716.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:16.649Z,1520510716.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:17.077Z,1520510717.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:17.478Z,1520510717.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:17.848Z,1520510717.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:18.254Z,1520510718.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:18.651Z,1520510718.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:19.047Z,1520510719.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:19.456Z,1520510719.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:19.814Z,1520510719.814 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T12:05:19.814Z,1520510719.814 [NAL9602] Data Fault, FailCount= 5
2018-03-08T12:05:19.814Z,1520510719.814 [NAL9602](ERROR): Data Fault
2018-03-08T12:05:19.864Z,1520510719.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:19.901Z,1520510719.901 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T12:05:19.901Z,1520510719.901 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-08T12:05:20.208Z,1520510720.208 [NAL9602](INFO): Powering down
2018-03-08T12:05:20.254Z,1520510720.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:20.265Z,1520510720.265 [CBIT](INFO): Critical error at 20180308T120519
2018-03-08T12:05:20.653Z,1520510720.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:21.055Z,1520510721.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:21.452Z,1520510721.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:21.851Z,1520510721.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:22.252Z,1520510722.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:22.654Z,1520510722.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:23.048Z,1520510723.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:23.455Z,1520510723.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:23.853Z,1520510723.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:24.271Z,1520510724.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:24.653Z,1520510724.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:25.047Z,1520510725.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:25.458Z,1520510725.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:25.852Z,1520510725.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:26.254Z,1520510726.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:26.651Z,1520510726.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:27.057Z,1520510727.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:27.443Z,1520510727.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:27.858Z,1520510727.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:28.257Z,1520510728.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:28.650Z,1520510728.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:29.060Z,1520510729.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:29.463Z,1520510729.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:29.853Z,1520510729.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:30.262Z,1520510730.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:30.644Z,1520510730.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:31.036Z,1520510731.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:31.468Z,1520510731.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:31.844Z,1520510731.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:32.243Z,1520510732.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:32.646Z,1520510732.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:33.048Z,1520510733.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:33.438Z,1520510733.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:33.871Z,1520510733.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:34.246Z,1520510734.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:34.641Z,1520510734.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:35.047Z,1520510735.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:35.448Z,1520510735.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:35.846Z,1520510735.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:36.250Z,1520510736.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:36.645Z,1520510736.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:37.043Z,1520510737.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:37.449Z,1520510737.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:37.849Z,1520510737.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:38.250Z,1520510738.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:38.647Z,1520510738.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:39.050Z,1520510739.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:39.442Z,1520510739.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:39.850Z,1520510739.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:40.245Z,1520510740.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:40.650Z,1520510740.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:41.049Z,1520510741.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:41.443Z,1520510741.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:41.881Z,1520510741.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:42.254Z,1520510742.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:42.650Z,1520510742.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:43.052Z,1520510743.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:43.455Z,1520510743.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:43.849Z,1520510743.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:44.256Z,1520510744.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:44.654Z,1520510744.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:45.048Z,1520510745.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:45.463Z,1520510745.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:45.887Z,1520510745.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:46.248Z,1520510746.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:46.651Z,1520510746.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:47.053Z,1520510747.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:47.452Z,1520510747.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:47.846Z,1520510747.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:48.253Z,1520510748.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:48.649Z,1520510748.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:49.047Z,1520510749.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:49.451Z,1520510749.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:49.853Z,1520510749.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:50.265Z,1520510750.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:50.653Z,1520510750.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:51.048Z,1520510751.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:51.452Z,1520510751.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:51.855Z,1520510751.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:54.946Z,1520510754.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:55.086Z,1520510755.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:55.422Z,1520510755.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:55.814Z,1520510755.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:56.211Z,1520510756.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:56.611Z,1520510756.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:57.014Z,1520510757.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:57.410Z,1520510757.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:57.814Z,1520510757.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:58.210Z,1520510758.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:58.610Z,1520510758.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:59.014Z,1520510759.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:59.414Z,1520510759.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:05:59.811Z,1520510759.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:00.212Z,1520510760.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:00.608Z,1520510760.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:01.010Z,1520510761.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:01.413Z,1520510761.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:01.810Z,1520510761.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:02.210Z,1520510762.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:02.611Z,1520510762.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:03.014Z,1520510763.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:03.410Z,1520510763.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:03.811Z,1520510763.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:04.214Z,1520510764.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:04.610Z,1520510764.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:05.054Z,1520510765.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:05.410Z,1520510765.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:05.811Z,1520510765.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:06.214Z,1520510766.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:06.610Z,1520510766.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:07.009Z,1520510767.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:07.414Z,1520510767.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:07.810Z,1520510767.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:08.210Z,1520510768.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:08.614Z,1520510768.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:09.010Z,1520510769.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:09.410Z,1520510769.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:09.813Z,1520510769.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:10.214Z,1520510770.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:10.621Z,1520510770.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:11.013Z,1520510771.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:11.411Z,1520510771.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:11.814Z,1520510771.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:12.217Z,1520510772.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:12.615Z,1520510772.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:13.007Z,1520510773.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:13.411Z,1520510773.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:13.815Z,1520510773.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:14.209Z,1520510774.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:14.614Z,1520510774.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:15.011Z,1520510775.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:15.409Z,1520510775.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:15.814Z,1520510775.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:16.216Z,1520510776.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:16.610Z,1520510776.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:17.010Z,1520510777.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:17.417Z,1520510777.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:17.810Z,1520510777.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:18.215Z,1520510778.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:18.615Z,1520510778.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:19.010Z,1520510779.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:19.412Z,1520510779.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:19.822Z,1520510779.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:20.216Z,1520510780.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:20.694Z,1520510780.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:21.015Z,1520510781.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:21.415Z,1520510781.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:21.815Z,1520510781.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:22.223Z,1520510782.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:22.613Z,1520510782.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:23.018Z,1520510783.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:23.418Z,1520510783.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:23.816Z,1520510783.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:24.301Z,1520510784.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:24.614Z,1520510784.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:25.017Z,1520510785.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:25.425Z,1520510785.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:25.821Z,1520510785.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:26.211Z,1520510786.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:26.622Z,1520510786.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:27.020Z,1520510787.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:27.414Z,1520510787.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:27.820Z,1520510787.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:28.208Z,1520510788.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:28.617Z,1520510788.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:29.025Z,1520510789.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:29.399Z,1520510789.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:29.807Z,1520510789.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:30.212Z,1520510790.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:30.606Z,1520510790.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:31.042Z,1520510791.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:31.435Z,1520510791.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:31.807Z,1520510791.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:32.230Z,1520510792.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:32.612Z,1520510792.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:33.005Z,1520510793.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:33.410Z,1520510793.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:33.812Z,1520510793.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:34.207Z,1520510794.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:34.613Z,1520510794.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:35.008Z,1520510795.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:35.406Z,1520510795.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:35.813Z,1520510795.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:36.209Z,1520510796.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:36.605Z,1520510796.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:37.008Z,1520510797.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:37.412Z,1520510797.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:37.805Z,1520510797.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:38.214Z,1520510798.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:38.613Z,1520510798.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:39.005Z,1520510799.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:39.411Z,1520510799.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:39.812Z,1520510799.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:40.214Z,1520510800.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:40.613Z,1520510800.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:41.012Z,1520510801.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:41.406Z,1520510801.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:41.809Z,1520510801.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:42.210Z,1520510802.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:42.605Z,1520510802.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:43.009Z,1520510803.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:43.412Z,1520510803.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:43.806Z,1520510803.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:44.213Z,1520510804.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:44.609Z,1520510804.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:45.006Z,1520510805.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:45.413Z,1520510805.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:45.812Z,1520510805.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:46.210Z,1520510806.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:46.610Z,1520510806.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:47.011Z,1520510807.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:47.406Z,1520510807.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:47.813Z,1520510807.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:48.213Z,1520510808.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:48.605Z,1520510808.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:49.018Z,1520510809.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:49.412Z,1520510809.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:49.812Z,1520510809.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:50.218Z,1520510810.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:50.610Z,1520510810.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:51.010Z,1520510811.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:51.419Z,1520510811.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:51.822Z,1520510811.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:52.208Z,1520510812.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:55.310Z,1520510815.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:55.446Z,1520510815.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:55.793Z,1520510815.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:56.199Z,1520510816.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:56.597Z,1520510816.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:56.976Z,1520510816.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:57.382Z,1520510817.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:57.777Z,1520510817.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:58.179Z,1520510818.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:58.576Z,1520510818.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:58.977Z,1520510818.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:59.379Z,1520510819.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:06:59.775Z,1520510819.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:00.174Z,1520510820.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:00.579Z,1520510820.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:00.975Z,1520510820.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:01.375Z,1520510821.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:01.779Z,1520510821.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:02.176Z,1520510822.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:02.575Z,1520510822.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:02.974Z,1520510822.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:03.376Z,1520510823.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:03.779Z,1520510823.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:04.174Z,1520510824.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:04.571Z,1520510824.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:04.979Z,1520510824.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:05.379Z,1520510825.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:05.774Z,1520510825.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:06.182Z,1520510826.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:06.573Z,1520510826.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:06.973Z,1520510826.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:07.378Z,1520510827.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:07.773Z,1520510827.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:08.174Z,1520510828.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:08.581Z,1520510828.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:08.980Z,1520510828.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:09.370Z,1520510829.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:09.774Z,1520510829.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:10.174Z,1520510830.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:10.574Z,1520510830.574 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:10.574Z,1520510830.574 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88
2018-03-08T12:07:10.574Z,1520510830.574 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T12:07:10.576Z,1520510830.576 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:10.576Z,1520510830.576 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88
2018-03-08T12:07:10.576Z,1520510830.576 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T12:07:10.578Z,1520510830.578 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:10.578Z,1520510830.578 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 88
2018-03-08T12:07:10.578Z,1520510830.578 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T12:07:10.590Z,1520510830.590 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T12:07:10.590Z,1520510830.590 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T12:07:10.590Z,1520510830.590 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T12:07:10.993Z,1520510830.993 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T12:07:10.993Z,1520510830.993 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88
2018-03-08T12:07:10.993Z,1520510830.993 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T12:07:10.994Z,1520510830.994 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88
2018-03-08T12:07:10.994Z,1520510830.994 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T12:07:10.994Z,1520510830.994 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 88
2018-03-08T12:07:11.381Z,1520510831.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T12:07:11.382Z,1520510831.382 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:07:11.382Z,1520510831.382 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:07:11.382Z,1520510831.382 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T12:07:11.383Z,1520510831.383 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:07:11.383Z,1520510831.383 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:07:11.383Z,1520510831.383 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T12:07:11.384Z,1520510831.384 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:07:11.384Z,1520510831.384 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:07:11.783Z,1520510831.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T12:07:11.784Z,1520510831.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:12.181Z,1520510832.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T12:07:12.182Z,1520510832.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:12.577Z,1520510832.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T12:07:12.578Z,1520510832.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:12.976Z,1520510832.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T12:07:12.977Z,1520510832.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:13.381Z,1520510833.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T12:07:13.382Z,1520510833.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:13.784Z,1520510833.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T12:07:13.785Z,1520510833.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:14.176Z,1520510834.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T12:07:14.178Z,1520510834.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:14.581Z,1520510834.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T12:07:14.582Z,1520510834.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:14.985Z,1520510834.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T12:07:14.986Z,1520510834.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:15.376Z,1520510835.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T12:07:15.377Z,1520510835.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:15.781Z,1520510835.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T12:07:15.782Z,1520510835.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:16.195Z,1520510836.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T12:07:16.196Z,1520510836.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:16.584Z,1520510836.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T12:07:16.585Z,1520510836.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:16.982Z,1520510836.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T12:07:16.983Z,1520510836.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:17.384Z,1520510837.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T12:07:17.385Z,1520510837.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:17.780Z,1520510837.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T12:07:17.781Z,1520510837.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:18.181Z,1520510838.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T12:07:18.182Z,1520510838.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:18.584Z,1520510838.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T12:07:18.585Z,1520510838.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:18.985Z,1520510838.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T12:07:18.986Z,1520510838.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:19.381Z,1520510839.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T12:07:19.381Z,1520510839.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:19.784Z,1520510839.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T12:07:19.785Z,1520510839.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:20.176Z,1520510840.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T12:07:20.177Z,1520510840.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:20.190Z,1520510840.190 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T12:07:20.190Z,1520510840.190 [NAL9602] No Fault, FailCount= 5
2018-03-08T12:07:20.542Z,1520510840.542 [NAL9602](INFO): Powering up NAL9602
2018-03-08T12:07:20.587Z,1520510840.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T12:07:20.588Z,1520510840.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:20.990Z,1520510840.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T12:07:20.991Z,1520510840.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:21.373Z,1520510841.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T12:07:21.374Z,1520510841.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:21.796Z,1520510841.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T12:07:21.801Z,1520510841.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:22.235Z,1520510842.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T12:07:22.236Z,1520510842.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:22.581Z,1520510842.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T12:07:22.582Z,1520510842.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:22.981Z,1520510842.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T12:07:22.982Z,1520510842.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:23.390Z,1520510843.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T12:07:23.391Z,1520510843.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:23.782Z,1520510843.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T12:07:23.782Z,1520510843.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:24.185Z,1520510844.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T12:07:24.186Z,1520510844.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:24.590Z,1520510844.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T12:07:24.591Z,1520510844.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:24.981Z,1520510844.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T12:07:24.982Z,1520510844.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:25.386Z,1520510845.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T12:07:25.387Z,1520510845.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:25.790Z,1520510845.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T12:07:25.791Z,1520510845.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:26.182Z,1520510846.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T12:07:26.183Z,1520510846.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:26.587Z,1520510846.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T12:07:26.588Z,1520510846.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:26.990Z,1520510846.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T12:07:26.991Z,1520510846.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:27.387Z,1520510847.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T12:07:27.388Z,1520510847.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:27.780Z,1520510847.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T12:07:27.781Z,1520510847.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:28.185Z,1520510848.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T12:07:28.186Z,1520510848.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:28.578Z,1520510848.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T12:07:28.579Z,1520510848.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:28.986Z,1520510848.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T12:07:28.987Z,1520510848.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:29.381Z,1520510849.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T12:07:29.382Z,1520510849.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:29.781Z,1520510849.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T12:07:29.782Z,1520510849.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:30.186Z,1520510850.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T12:07:30.187Z,1520510850.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:30.591Z,1520510850.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:30.993Z,1520510850.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:31.343Z,1520510851.343 [NAL9602](INFO): NAL9602 initialized
2018-03-08T12:07:31.391Z,1520510851.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:31.790Z,1520510851.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:32.189Z,1520510852.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:32.596Z,1520510852.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:32.989Z,1520510852.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:33.379Z,1520510853.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:33.785Z,1520510853.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:34.194Z,1520510854.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:34.592Z,1520510854.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:35.001Z,1520510855.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:35.407Z,1520510855.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:35.785Z,1520510855.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:36.189Z,1520510856.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:36.588Z,1520510856.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:36.988Z,1520510856.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:37.397Z,1520510857.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:37.797Z,1520510857.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:38.194Z,1520510858.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:38.584Z,1520510858.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:38.986Z,1520510858.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:39.393Z,1520510859.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:39.797Z,1520510859.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:40.203Z,1520510860.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:40.589Z,1520510860.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:40.989Z,1520510860.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:41.436Z,1520510861.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:41.798Z,1520510861.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:42.196Z,1520510862.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:42.623Z,1520510862.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:42.975Z,1520510862.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:43.383Z,1520510863.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:43.795Z,1520510863.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:44.204Z,1520510864.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:44.593Z,1520510864.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:44.984Z,1520510864.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:45.396Z,1520510865.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:45.803Z,1520510865.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:46.204Z,1520510866.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:46.598Z,1520510866.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:46.998Z,1520510866.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:47.403Z,1520510867.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:47.807Z,1520510867.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:48.196Z,1520510868.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:48.594Z,1520510868.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:48.985Z,1520510868.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:49.400Z,1520510869.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:49.799Z,1520510869.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:50.206Z,1520510870.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:50.576Z,1520510870.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:50.978Z,1520510870.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:51.407Z,1520510871.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:51.800Z,1520510871.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:52.208Z,1520510872.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:52.579Z,1520510872.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:55.707Z,1520510875.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:55.848Z,1520510875.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:56.206Z,1520510876.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:56.586Z,1520510876.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:56.976Z,1520510876.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:57.379Z,1520510877.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:57.776Z,1520510877.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:58.176Z,1520510878.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:58.608Z,1520510878.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:58.986Z,1520510878.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:59.381Z,1520510879.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:07:59.775Z,1520510879.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:00.175Z,1520510880.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:00.583Z,1520510880.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:00.982Z,1520510880.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:01.388Z,1520510881.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:01.788Z,1520510881.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:02.192Z,1520510882.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:02.582Z,1520510882.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:02.982Z,1520510882.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:03.384Z,1520510883.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:03.786Z,1520510883.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:04.186Z,1520510884.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:04.583Z,1520510884.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:04.983Z,1520510884.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:05.385Z,1520510885.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:05.788Z,1520510885.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:06.185Z,1520510886.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:06.583Z,1520510886.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:06.983Z,1520510886.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:07.384Z,1520510887.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:07.788Z,1520510887.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:08.185Z,1520510888.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:08.584Z,1520510888.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:08.990Z,1520510888.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:09.384Z,1520510889.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:09.786Z,1520510889.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:10.185Z,1520510890.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:10.583Z,1520510890.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:10.983Z,1520510890.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:11.385Z,1520510891.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:11.788Z,1520510891.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:12.170Z,1520510892.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:08:12.190Z,1520510892.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:12.563Z,1520510892.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:08:12.579Z,1520510892.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:12.967Z,1520510892.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:08:12.983Z,1520510892.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:13.369Z,1520510893.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:08:13.385Z,1520510893.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:13.774Z,1520510893.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:08:13.790Z,1520510893.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:14.183Z,1520510894.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:08:14.215Z,1520510894.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:14.569Z,1520510894.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:08:14.584Z,1520510894.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:14.967Z,1520510894.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:08:14.982Z,1520510894.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:15.381Z,1520510895.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:08:15.396Z,1520510895.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:15.773Z,1520510895.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:08:15.788Z,1520510895.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:16.172Z,1520510896.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:08:16.188Z,1520510896.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:16.572Z,1520510896.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:08:16.587Z,1520510896.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:16.960Z,1520510896.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:08:16.975Z,1520510896.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:17.377Z,1520510897.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:08:17.393Z,1520510897.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:17.773Z,1520510897.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:08:17.789Z,1520510897.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:18.189Z,1520510898.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:18.590Z,1520510898.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:18.986Z,1520510898.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:19.389Z,1520510899.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:19.798Z,1520510899.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:20.192Z,1520510900.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:20.586Z,1520510900.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:20.981Z,1520510900.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:21.396Z,1520510901.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:21.796Z,1520510901.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:22.198Z,1520510902.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:22.584Z,1520510902.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:22.989Z,1520510902.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:23.397Z,1520510903.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:23.797Z,1520510903.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:24.201Z,1520510904.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:24.590Z,1520510904.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:24.987Z,1520510904.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:25.401Z,1520510905.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:25.802Z,1520510905.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:26.206Z,1520510906.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:26.590Z,1520510906.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:26.964Z,1520510906.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:27.399Z,1520510907.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:27.797Z,1520510907.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:28.192Z,1520510908.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:28.593Z,1520510908.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:28.994Z,1520510908.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:29.395Z,1520510909.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:29.802Z,1520510909.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:30.196Z,1520510910.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:30.594Z,1520510910.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:30.972Z,1520510910.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:31.400Z,1520510911.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:31.797Z,1520510911.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:32.198Z,1520510912.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:32.575Z,1520510912.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:32.968Z,1520510912.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:33.397Z,1520510913.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:33.800Z,1520510913.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:34.198Z,1520510914.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:34.599Z,1520510914.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:34.978Z,1520510914.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:35.376Z,1520510915.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:35.804Z,1520510915.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:36.188Z,1520510916.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:36.576Z,1520510916.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:36.975Z,1520510916.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:37.407Z,1520510917.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:37.777Z,1520510917.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:38.210Z,1520510918.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:38.580Z,1520510918.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:38.979Z,1520510918.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:39.392Z,1520510919.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:39.788Z,1520510919.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:40.190Z,1520510920.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:40.583Z,1520510920.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:40.981Z,1520510920.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:41.383Z,1520510921.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:41.810Z,1520510921.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:42.190Z,1520510922.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:42.583Z,1520510922.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:42.982Z,1520510922.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:43.384Z,1520510923.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:43.788Z,1520510923.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:44.210Z,1520510924.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:44.584Z,1520510924.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:44.982Z,1520510924.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:45.385Z,1520510925.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:45.787Z,1520510925.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:46.189Z,1520510926.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:46.584Z,1520510926.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:46.983Z,1520510926.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:47.393Z,1520510927.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:47.788Z,1520510927.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:48.194Z,1520510928.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:48.578Z,1520510928.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:48.990Z,1520510928.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:49.389Z,1520510929.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:49.784Z,1520510929.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:50.193Z,1520510930.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:50.584Z,1520510930.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:50.983Z,1520510930.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:51.394Z,1520510931.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:51.788Z,1520510931.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:51.791Z,1520510931.791 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T12:08:51.791Z,1520510931.791 [Default:CheckIn:C.Wait] Stopped
2018-03-08T12:08:51.791Z,1520510931.791 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T12:08:51.791Z,1520510931.791 [Default:CheckIn:D] Running Loop=1
2018-03-08T12:08:52.189Z,1520510932.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:52.192Z,1520510932.192 [Default:CheckIn:D] Stopped
2018-03-08T12:08:52.192Z,1520510932.192 [Default:CheckIn:E] Running Loop=1
2018-03-08T12:08:52.586Z,1520510932.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:52.590Z,1520510932.590 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 263.123112 min 
2018-03-08T12:08:52.590Z,1520510932.590 [Default:CheckIn:E] Stopped
2018-03-08T12:08:52.590Z,1520510932.590 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T12:08:52.590Z,1520510932.590 [Default:CheckIn] Stopped
2018-03-08T12:08:52.590Z,1520510932.590 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T12:08:52.591Z,1520510932.591 [Default:CheckIn](INFO): Running loop #26
2018-03-08T12:08:52.591Z,1520510932.591 [Default:CheckIn] Running Loop=26
2018-03-08T12:08:52.591Z,1520510932.591 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T12:08:52.591Z,1520510932.591 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T12:08:52.986Z,1520510932.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:56.126Z,1520510936.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:56.286Z,1520510936.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:56.619Z,1520510936.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:56.996Z,1520510936.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:57.399Z,1520510937.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:57.798Z,1520510937.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:58.197Z,1520510938.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:58.624Z,1520510938.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:59.021Z,1520510939.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:59.423Z,1520510939.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:08:59.802Z,1520510939.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:00.193Z,1520510940.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:00.625Z,1520510940.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:00.993Z,1520510940.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:01.424Z,1520510941.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:01.824Z,1520510941.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:02.225Z,1520510942.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:02.596Z,1520510942.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:02.999Z,1520510942.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:03.393Z,1520510943.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:03.797Z,1520510943.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:04.198Z,1520510944.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:04.597Z,1520510944.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:05.019Z,1520510945.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:05.423Z,1520510945.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:05.802Z,1520510945.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:06.195Z,1520510946.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:06.595Z,1520510946.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:06.999Z,1520510946.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:07.412Z,1520510947.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:07.806Z,1520510947.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:08.215Z,1520510948.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:08.606Z,1520510948.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:09.002Z,1520510949.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:09.408Z,1520510949.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:09.814Z,1520510949.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:10.208Z,1520510950.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:10.598Z,1520510950.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:10.998Z,1520510950.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:11.402Z,1520510951.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:11.804Z,1520510951.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:12.202Z,1520510952.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:12.608Z,1520510952.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:13.007Z,1520510953.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:13.414Z,1520510953.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:13.802Z,1520510953.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:14.196Z,1520510954.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:14.603Z,1520510954.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:15.002Z,1520510955.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:15.407Z,1520510955.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:15.808Z,1520510955.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:16.208Z,1520510956.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:16.598Z,1520510956.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:16.999Z,1520510956.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:17.402Z,1520510957.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:17.803Z,1520510957.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:18.207Z,1520510958.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:18.608Z,1520510958.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:19.008Z,1520510959.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:19.408Z,1520510959.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:19.802Z,1520510959.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:20.196Z,1520510960.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:20.600Z,1520510960.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:21.002Z,1520510961.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:21.409Z,1520510961.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:21.811Z,1520510961.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:22.213Z,1520510962.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:22.606Z,1520510962.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:22.998Z,1520510962.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:23.397Z,1520510963.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:23.810Z,1520510963.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:24.211Z,1520510964.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:24.612Z,1520510964.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:25.008Z,1520510965.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:25.408Z,1520510965.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:25.805Z,1520510965.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:26.204Z,1520510966.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:26.609Z,1520510966.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:27.010Z,1520510967.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:27.419Z,1520510967.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:27.813Z,1520510967.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:28.227Z,1520510968.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:28.607Z,1520510968.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:29.011Z,1520510969.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:29.419Z,1520510969.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:29.817Z,1520510969.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:30.220Z,1520510970.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:30.598Z,1520510970.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:30.992Z,1520510970.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:31.418Z,1520510971.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:31.783Z,1520510971.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:31.799Z,1520510971.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:32.176Z,1520510972.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:32.192Z,1520510972.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:32.598Z,1520510972.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:32.622Z,1520510972.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:32.989Z,1520510972.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:33.017Z,1520510973.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:33.385Z,1520510973.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:33.401Z,1520510973.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:33.786Z,1520510973.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:33.801Z,1520510973.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:34.184Z,1520510974.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:34.199Z,1520510974.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:34.581Z,1520510974.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:34.597Z,1520510974.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:34.982Z,1520510974.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:34.997Z,1520510974.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:35.389Z,1520510975.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:35.404Z,1520510975.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:35.798Z,1520510975.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:35.830Z,1520510975.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:36.190Z,1520510976.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:36.205Z,1520510976.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:36.587Z,1520510976.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:36.602Z,1520510976.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:36.982Z,1520510976.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:36.997Z,1520510976.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:37.383Z,1520510977.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:37.399Z,1520510977.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:37.788Z,1520510977.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:37.804Z,1520510977.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:38.182Z,1520510978.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:38.197Z,1520510978.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:38.589Z,1520510978.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:38.605Z,1520510978.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:38.989Z,1520510978.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:39.004Z,1520510979.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:39.390Z,1520510979.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:39.405Z,1520510979.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:39.782Z,1520510979.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:39.802Z,1520510979.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:40.181Z,1520510980.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:40.196Z,1520510980.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:40.579Z,1520510980.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:40.602Z,1520510980.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:40.982Z,1520510980.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:41.002Z,1520510981.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:41.390Z,1520510981.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:41.405Z,1520510981.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:41.789Z,1520510981.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:41.804Z,1520510981.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:42.190Z,1520510982.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:42.206Z,1520510982.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:42.580Z,1520510982.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:42.596Z,1520510982.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:42.975Z,1520510982.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:42.998Z,1520510982.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:43.382Z,1520510983.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:43.406Z,1520510983.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:43.789Z,1520510983.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:43.803Z,1520510983.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:44.181Z,1520510984.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:44.202Z,1520510984.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:44.592Z,1520510984.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:44.607Z,1520510984.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:44.993Z,1520510984.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:45.008Z,1520510985.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:45.387Z,1520510985.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:45.409Z,1520510985.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:45.779Z,1520510985.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:45.801Z,1520510985.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:46.181Z,1520510986.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:46.202Z,1520510986.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:46.589Z,1520510986.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:46.604Z,1520510986.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:46.987Z,1520510986.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:47.002Z,1520510987.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:47.394Z,1520510987.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:47.409Z,1520510987.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:47.792Z,1520510987.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:47.807Z,1520510987.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:48.193Z,1520510988.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:48.208Z,1520510988.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:48.580Z,1520510988.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:48.595Z,1520510988.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:48.976Z,1520510988.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:49.004Z,1520510989.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:49.387Z,1520510989.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:49.402Z,1520510989.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:49.771Z,1520510989.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:49.803Z,1520510989.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:50.168Z,1520510990.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:50.207Z,1520510990.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:50.598Z,1520510990.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:50.614Z,1520510990.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:50.998Z,1520510990.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:51.013Z,1520510991.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:51.394Z,1520510991.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:51.409Z,1520510991.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:51.775Z,1520510991.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:51.802Z,1520510991.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:52.171Z,1520510992.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:52.208Z,1520510992.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:52.580Z,1520510992.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:52.599Z,1520510992.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:52.985Z,1520510992.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:53.000Z,1520510993.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:56.085Z,1520510996.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:56.100Z,1520510996.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:56.209Z,1520510996.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:56.251Z,1520510996.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:56.601Z,1520510996.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:09:56.631Z,1520510996.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:57.003Z,1520510997.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:57.400Z,1520510997.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:57.804Z,1520510997.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:58.204Z,1520510998.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:58.603Z,1520510998.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:59.034Z,1520510999.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:59.410Z,1520510999.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:09:59.810Z,1520510999.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:00.203Z,1520511000.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:00.604Z,1520511000.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:00.999Z,1520511000.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:01.404Z,1520511001.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:01.831Z,1520511001.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:02.210Z,1520511002.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:02.604Z,1520511002.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:03.010Z,1520511003.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:03.403Z,1520511003.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:03.829Z,1520511003.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:04.249Z,1520511004.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:04.598Z,1520511004.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:05.004Z,1520511005.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:05.403Z,1520511005.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:05.805Z,1520511005.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:06.210Z,1520511006.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:06.610Z,1520511006.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:07.010Z,1520511007.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:07.429Z,1520511007.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:07.805Z,1520511007.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:08.201Z,1520511008.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:08.605Z,1520511008.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:09.004Z,1520511009.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:09.405Z,1520511009.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:09.831Z,1520511009.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:10.233Z,1520511010.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:10.600Z,1520511010.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:11.003Z,1520511011.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:11.431Z,1520511011.431 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:11.431Z,1520511011.431 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89
2018-03-08T12:10:11.431Z,1520511011.431 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T12:10:11.433Z,1520511011.433 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:11.433Z,1520511011.433 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89
2018-03-08T12:10:11.433Z,1520511011.433 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T12:10:11.434Z,1520511011.434 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:11.435Z,1520511011.435 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 89
2018-03-08T12:10:11.435Z,1520511011.435 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T12:10:11.446Z,1520511011.446 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T12:10:11.447Z,1520511011.447 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T12:10:11.447Z,1520511011.447 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T12:10:11.841Z,1520511011.841 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T12:10:11.841Z,1520511011.841 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89
2018-03-08T12:10:11.841Z,1520511011.841 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T12:10:11.842Z,1520511011.842 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89
2018-03-08T12:10:11.842Z,1520511011.842 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T12:10:11.842Z,1520511011.842 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 89
2018-03-08T12:10:12.202Z,1520511012.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T12:10:12.202Z,1520511012.202 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:10:12.203Z,1520511012.203 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:10:12.203Z,1520511012.203 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T12:10:12.204Z,1520511012.204 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:10:12.204Z,1520511012.204 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:10:12.204Z,1520511012.204 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T12:10:12.205Z,1520511012.205 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:10:12.205Z,1520511012.205 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:10:12.621Z,1520511012.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T12:10:12.622Z,1520511012.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:13.015Z,1520511013.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T12:10:13.016Z,1520511013.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:13.419Z,1520511013.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T12:10:13.419Z,1520511013.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:13.807Z,1520511013.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T12:10:13.808Z,1520511013.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:14.206Z,1520511014.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T12:10:14.207Z,1520511014.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:14.605Z,1520511014.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T12:10:14.606Z,1520511014.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:15.003Z,1520511015.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T12:10:15.005Z,1520511015.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:15.415Z,1520511015.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T12:10:15.416Z,1520511015.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:15.815Z,1520511015.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T12:10:15.817Z,1520511015.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:16.218Z,1520511016.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T12:10:16.219Z,1520511016.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:16.603Z,1520511016.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T12:10:16.604Z,1520511016.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:17.010Z,1520511017.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T12:10:17.011Z,1520511017.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:17.405Z,1520511017.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T12:10:17.406Z,1520511017.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:17.809Z,1520511017.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T12:10:17.810Z,1520511017.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:18.212Z,1520511018.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T12:10:18.217Z,1520511018.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:18.626Z,1520511018.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T12:10:18.627Z,1520511018.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:19.020Z,1520511019.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T12:10:19.021Z,1520511019.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:19.426Z,1520511019.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T12:10:19.427Z,1520511019.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:19.820Z,1520511019.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T12:10:19.821Z,1520511019.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:20.214Z,1520511020.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T12:10:20.215Z,1520511020.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:20.603Z,1520511020.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T12:10:20.604Z,1520511020.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:21.003Z,1520511021.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T12:10:21.004Z,1520511021.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:21.430Z,1520511021.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T12:10:21.431Z,1520511021.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:21.828Z,1520511021.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T12:10:21.829Z,1520511021.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:22.231Z,1520511022.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T12:10:22.232Z,1520511022.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:22.597Z,1520511022.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T12:10:22.597Z,1520511022.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:23.001Z,1520511023.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T12:10:23.002Z,1520511023.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:23.397Z,1520511023.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T12:10:23.398Z,1520511023.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:23.804Z,1520511023.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T12:10:23.805Z,1520511023.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:24.229Z,1520511024.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T12:10:24.230Z,1520511024.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:24.616Z,1520511024.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T12:10:24.639Z,1520511024.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:25.016Z,1520511025.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T12:10:25.037Z,1520511025.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:25.408Z,1520511025.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T12:10:25.409Z,1520511025.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:25.804Z,1520511025.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T12:10:25.805Z,1520511025.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:26.198Z,1520511026.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T12:10:26.199Z,1520511026.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:26.604Z,1520511026.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T12:10:26.605Z,1520511026.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:27.005Z,1520511027.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T12:10:27.006Z,1520511027.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:27.408Z,1520511027.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T12:10:27.409Z,1520511027.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:27.818Z,1520511027.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T12:10:27.819Z,1520511027.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:28.212Z,1520511028.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T12:10:28.213Z,1520511028.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:28.606Z,1520511028.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T12:10:28.607Z,1520511028.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:29.001Z,1520511029.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T12:10:29.002Z,1520511029.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:29.398Z,1520511029.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T12:10:29.399Z,1520511029.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:29.800Z,1520511029.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T12:10:29.801Z,1520511029.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:30.203Z,1520511030.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T12:10:30.204Z,1520511030.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:30.612Z,1520511030.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T12:10:30.613Z,1520511030.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:31.018Z,1520511031.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T12:10:31.019Z,1520511031.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:31.418Z,1520511031.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T12:10:31.419Z,1520511031.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:31.807Z,1520511031.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:32.207Z,1520511032.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:32.603Z,1520511032.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:33.002Z,1520511033.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:33.418Z,1520511033.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:33.819Z,1520511033.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:34.212Z,1520511034.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:34.607Z,1520511034.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:35.002Z,1520511035.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:35.415Z,1520511035.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:35.799Z,1520511035.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:36.207Z,1520511036.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:36.612Z,1520511036.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:37.018Z,1520511037.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:37.419Z,1520511037.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:37.807Z,1520511037.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:38.207Z,1520511038.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:38.605Z,1520511038.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:39.006Z,1520511039.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:39.419Z,1520511039.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:39.818Z,1520511039.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:40.213Z,1520511040.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:40.611Z,1520511040.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:41.003Z,1520511041.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:41.406Z,1520511041.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:41.807Z,1520511041.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:42.207Z,1520511042.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:42.612Z,1520511042.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:43.018Z,1520511043.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:43.418Z,1520511043.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:43.807Z,1520511043.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:44.207Z,1520511044.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:44.607Z,1520511044.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:45.008Z,1520511045.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:45.418Z,1520511045.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:45.818Z,1520511045.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:46.236Z,1520511046.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:46.604Z,1520511046.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:47.010Z,1520511047.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:47.404Z,1520511047.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:47.809Z,1520511047.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:48.203Z,1520511048.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:48.612Z,1520511048.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:49.019Z,1520511049.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:49.419Z,1520511049.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:49.803Z,1520511049.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:50.207Z,1520511050.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:50.608Z,1520511050.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:51.006Z,1520511051.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:51.415Z,1520511051.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:51.819Z,1520511051.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:52.212Z,1520511052.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:52.607Z,1520511052.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:53.002Z,1520511053.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:56.103Z,1520511056.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:56.239Z,1520511056.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:56.596Z,1520511056.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:56.997Z,1520511056.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:57.398Z,1520511057.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:57.791Z,1520511057.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:58.194Z,1520511058.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:58.567Z,1520511058.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:58.973Z,1520511058.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:59.401Z,1520511059.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:10:59.802Z,1520511059.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:00.198Z,1520511060.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:00.578Z,1520511060.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:00.967Z,1520511060.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:01.399Z,1520511061.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:01.801Z,1520511061.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:02.172Z,1520511062.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:02.578Z,1520511062.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:02.971Z,1520511062.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:03.376Z,1520511063.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:03.780Z,1520511063.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:04.187Z,1520511064.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:04.572Z,1520511064.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:04.974Z,1520511064.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:05.380Z,1520511065.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:05.780Z,1520511065.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:06.180Z,1520511066.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:06.575Z,1520511066.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:06.974Z,1520511066.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:07.380Z,1520511067.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:07.779Z,1520511067.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:08.176Z,1520511068.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:08.575Z,1520511068.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:08.975Z,1520511068.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:09.376Z,1520511069.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:09.780Z,1520511069.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:10.209Z,1520511070.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:10.575Z,1520511070.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:10.975Z,1520511070.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:11.380Z,1520511071.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:11.780Z,1520511071.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:12.180Z,1520511072.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:12.575Z,1520511072.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:12.974Z,1520511072.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:13.380Z,1520511073.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:13.779Z,1520511073.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:14.175Z,1520511074.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:14.575Z,1520511074.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:14.974Z,1520511074.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:15.377Z,1520511075.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:15.780Z,1520511075.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:16.203Z,1520511076.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:16.575Z,1520511076.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:16.974Z,1520511076.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:17.380Z,1520511077.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:17.786Z,1520511077.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:18.180Z,1520511078.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:18.575Z,1520511078.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:18.975Z,1520511078.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:19.380Z,1520511079.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:19.780Z,1520511079.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:20.175Z,1520511080.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:20.575Z,1520511080.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:20.971Z,1520511080.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:21.375Z,1520511081.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:21.780Z,1520511081.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:22.187Z,1520511082.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:22.585Z,1520511082.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:22.976Z,1520511082.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:23.380Z,1520511083.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:23.781Z,1520511083.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:24.181Z,1520511084.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:24.577Z,1520511084.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:24.975Z,1520511084.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:25.386Z,1520511085.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:25.779Z,1520511085.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:26.184Z,1520511086.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:26.576Z,1520511086.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:26.975Z,1520511086.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:27.385Z,1520511087.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:27.783Z,1520511087.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:28.191Z,1520511088.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:28.576Z,1520511088.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:28.977Z,1520511088.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:29.389Z,1520511089.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:29.794Z,1520511089.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:30.188Z,1520511090.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:30.576Z,1520511090.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:30.975Z,1520511090.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:31.389Z,1520511091.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:31.788Z,1520511091.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:32.191Z,1520511092.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:32.584Z,1520511092.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:32.989Z,1520511092.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:33.384Z,1520511093.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:33.796Z,1520511093.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:34.192Z,1520511094.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:34.568Z,1520511094.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:34.967Z,1520511094.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:35.398Z,1520511095.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:35.797Z,1520511095.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:36.202Z,1520511096.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:36.574Z,1520511096.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:36.966Z,1520511096.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:37.392Z,1520511097.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:37.797Z,1520511097.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:38.172Z,1520511098.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:38.594Z,1520511098.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:38.973Z,1520511098.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:39.373Z,1520511099.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:39.797Z,1520511099.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:40.202Z,1520511100.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:40.575Z,1520511100.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:40.972Z,1520511100.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:41.384Z,1520511101.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:41.784Z,1520511101.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:42.181Z,1520511102.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:42.575Z,1520511102.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:42.978Z,1520511102.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:43.380Z,1520511103.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:43.779Z,1520511103.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:44.176Z,1520511104.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:44.577Z,1520511104.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:44.975Z,1520511104.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:45.384Z,1520511105.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:45.784Z,1520511105.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:46.184Z,1520511106.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:46.224Z,1520511106.224 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T12:11:46.574Z,1520511106.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:46.976Z,1520511106.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:47.334Z,1520511107.334 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-03-08T12:11:47.334Z,1520511107.334 [DropWeight] Hardware Fault, FailCount= 1
2018-03-08T12:11:47.334Z,1520511107.334 [DropWeight](ERROR): Hardware Fault
2018-03-08T12:11:47.404Z,1520511107.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:47.425Z,1520511107.425 [CBIT](INFO): Critical error at 20180308T121147
2018-03-08T12:11:47.427Z,1520511107.427 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-03-08T12:11:47.428Z,1520511107.428 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-03-08T12:11:47.784Z,1520511107.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:47.795Z,1520511107.795 [CBIT](INFO): Critical error at 20180308T121147
2018-03-08T12:11:48.187Z,1520511108.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:48.575Z,1520511108.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:48.976Z,1520511108.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:49.394Z,1520511109.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:49.787Z,1520511109.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:50.189Z,1520511110.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:50.577Z,1520511110.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:50.976Z,1520511110.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:51.384Z,1520511111.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:51.788Z,1520511111.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:52.198Z,1520511112.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:52.582Z,1520511112.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:52.981Z,1520511112.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:53.389Z,1520511113.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:56.530Z,1520511116.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:56.658Z,1520511116.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:56.999Z,1520511116.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:57.403Z,1520511117.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:57.800Z,1520511117.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:58.204Z,1520511118.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:58.632Z,1520511118.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:59.004Z,1520511119.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:59.429Z,1520511119.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:11:59.802Z,1520511119.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:00.195Z,1520511120.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:00.601Z,1520511120.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:00.998Z,1520511120.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:01.405Z,1520511121.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:01.833Z,1520511121.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:02.237Z,1520511122.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:02.595Z,1520511122.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:03.002Z,1520511123.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:03.402Z,1520511123.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:03.803Z,1520511123.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:04.205Z,1520511124.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:04.616Z,1520511124.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:05.003Z,1520511125.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:05.405Z,1520511125.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:05.798Z,1520511125.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:06.201Z,1520511126.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:06.604Z,1520511126.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:07.003Z,1520511127.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:07.403Z,1520511127.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:07.809Z,1520511127.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:08.235Z,1520511128.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:08.603Z,1520511128.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:09.003Z,1520511129.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:09.406Z,1520511129.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:09.807Z,1520511129.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:10.202Z,1520511130.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:10.642Z,1520511130.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:11.012Z,1520511131.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:11.411Z,1520511131.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:11.807Z,1520511131.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:12.201Z,1520511132.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:12.602Z,1520511132.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:13.006Z,1520511133.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:13.413Z,1520511133.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:13.822Z,1520511133.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:14.216Z,1520511134.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:14.605Z,1520511134.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:15.004Z,1520511135.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:15.410Z,1520511135.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:15.809Z,1520511135.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:16.207Z,1520511136.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:16.614Z,1520511136.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:17.018Z,1520511137.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:17.422Z,1520511137.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:17.806Z,1520511137.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:18.208Z,1520511138.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:18.610Z,1520511138.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:19.004Z,1520511139.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:19.414Z,1520511139.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:19.816Z,1520511139.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:20.212Z,1520511140.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:20.610Z,1520511140.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:21.007Z,1520511141.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:21.423Z,1520511141.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:21.827Z,1520511141.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:22.222Z,1520511142.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:22.634Z,1520511142.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:23.009Z,1520511143.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:23.407Z,1520511143.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:23.809Z,1520511143.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:24.199Z,1520511144.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:24.616Z,1520511144.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:25.014Z,1520511145.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:25.421Z,1520511145.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:25.813Z,1520511145.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:26.217Z,1520511146.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:26.613Z,1520511146.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:27.013Z,1520511147.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:27.416Z,1520511147.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:27.826Z,1520511147.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:28.219Z,1520511148.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:28.616Z,1520511148.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:28.987Z,1520511148.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:29.413Z,1520511149.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:29.814Z,1520511149.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:30.188Z,1520511150.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:30.623Z,1520511150.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:31.018Z,1520511151.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:31.414Z,1520511151.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:31.815Z,1520511151.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:32.199Z,1520511152.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:32.598Z,1520511152.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:32.999Z,1520511152.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:33.422Z,1520511153.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:33.824Z,1520511153.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:34.241Z,1520511154.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:34.601Z,1520511154.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:34.991Z,1520511154.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:35.422Z,1520511155.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:35.802Z,1520511155.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:36.202Z,1520511156.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:36.625Z,1520511156.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:37.030Z,1520511157.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:37.400Z,1520511157.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:37.806Z,1520511157.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:38.197Z,1520511158.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:38.598Z,1520511158.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:39.003Z,1520511159.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:39.413Z,1520511159.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:39.812Z,1520511159.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:40.238Z,1520511160.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:40.604Z,1520511160.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:41.007Z,1520511161.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:41.410Z,1520511161.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:41.797Z,1520511161.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:42.210Z,1520511162.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:42.608Z,1520511162.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:43.035Z,1520511163.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:43.407Z,1520511163.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:43.806Z,1520511163.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:44.207Z,1520511164.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:44.604Z,1520511164.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:45.005Z,1520511165.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:45.409Z,1520511165.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:45.807Z,1520511165.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:46.207Z,1520511166.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:46.607Z,1520511166.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:47.011Z,1520511167.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:47.406Z,1520511167.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:47.807Z,1520511167.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:48.206Z,1520511168.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:48.609Z,1520511168.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:49.012Z,1520511169.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:49.408Z,1520511169.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:49.806Z,1520511169.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:50.207Z,1520511170.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:50.606Z,1520511170.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:51.002Z,1520511171.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:51.409Z,1520511171.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:51.812Z,1520511171.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:52.209Z,1520511172.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:52.606Z,1520511172.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:53.005Z,1520511173.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:53.403Z,1520511173.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:56.501Z,1520511176.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:56.638Z,1520511176.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:56.993Z,1520511176.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:57.394Z,1520511177.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:57.794Z,1520511177.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:58.166Z,1520511178.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:58.565Z,1520511178.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:58.970Z,1520511178.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:59.395Z,1520511179.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:12:59.798Z,1520511179.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:00.176Z,1520511180.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:00.574Z,1520511180.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:00.971Z,1520511180.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:01.380Z,1520511181.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:01.784Z,1520511181.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:02.186Z,1520511182.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:02.572Z,1520511182.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:02.973Z,1520511182.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:03.380Z,1520511183.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:03.780Z,1520511183.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:04.176Z,1520511184.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:04.574Z,1520511184.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:04.968Z,1520511184.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:05.391Z,1520511185.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:05.785Z,1520511185.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:06.189Z,1520511186.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:06.579Z,1520511186.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:06.982Z,1520511186.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:07.388Z,1520511187.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:07.787Z,1520511187.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:08.186Z,1520511188.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:08.579Z,1520511188.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:08.978Z,1520511188.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:09.389Z,1520511189.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:09.789Z,1520511189.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:10.191Z,1520511190.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:10.563Z,1520511190.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:10.966Z,1520511190.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:11.389Z,1520511191.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:11.791Z,1520511191.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:12.192Z,1520511192.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:12.567Z,1520511192.567 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:12.567Z,1520511192.567 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90
2018-03-08T12:13:12.567Z,1520511192.567 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T12:13:12.569Z,1520511192.569 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:12.569Z,1520511192.569 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90
2018-03-08T12:13:12.569Z,1520511192.569 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T12:13:12.571Z,1520511192.571 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:12.571Z,1520511192.571 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 90
2018-03-08T12:13:12.571Z,1520511192.571 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T12:13:12.607Z,1520511192.607 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T12:13:12.608Z,1520511192.608 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T12:13:12.608Z,1520511192.608 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T12:13:12.996Z,1520511192.996 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T12:13:12.996Z,1520511192.996 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90
2018-03-08T12:13:12.997Z,1520511192.997 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T12:13:12.997Z,1520511192.997 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90
2018-03-08T12:13:12.997Z,1520511192.997 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T12:13:12.997Z,1520511192.997 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 90
2018-03-08T12:13:13.379Z,1520511193.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T12:13:13.380Z,1520511193.380 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:13:13.380Z,1520511193.380 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:13:13.380Z,1520511193.380 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T12:13:13.393Z,1520511193.393 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:13:13.393Z,1520511193.393 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:13:13.397Z,1520511193.397 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T12:13:13.397Z,1520511193.397 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:13:13.397Z,1520511193.397 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:13:13.776Z,1520511193.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T12:13:13.777Z,1520511193.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:14.186Z,1520511194.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T12:13:14.187Z,1520511194.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:14.568Z,1520511194.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T12:13:14.569Z,1520511194.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:14.971Z,1520511194.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T12:13:14.972Z,1520511194.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:15.376Z,1520511195.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T12:13:15.377Z,1520511195.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:15.780Z,1520511195.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T12:13:15.781Z,1520511195.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:16.180Z,1520511196.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T12:13:16.181Z,1520511196.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:16.574Z,1520511196.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T12:13:16.575Z,1520511196.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:16.978Z,1520511196.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T12:13:16.979Z,1520511196.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:17.380Z,1520511197.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T12:13:17.381Z,1520511197.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:17.775Z,1520511197.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T12:13:17.776Z,1520511197.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:18.191Z,1520511198.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T12:13:18.192Z,1520511198.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:18.571Z,1520511198.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T12:13:18.572Z,1520511198.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:18.975Z,1520511198.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T12:13:18.976Z,1520511198.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:19.380Z,1520511199.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T12:13:19.381Z,1520511199.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:19.786Z,1520511199.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T12:13:19.787Z,1520511199.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:20.180Z,1520511200.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T12:13:20.181Z,1520511200.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:20.575Z,1520511200.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T12:13:20.576Z,1520511200.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:20.980Z,1520511200.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T12:13:20.981Z,1520511200.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:21.383Z,1520511201.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T12:13:21.384Z,1520511201.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:21.783Z,1520511201.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T12:13:21.784Z,1520511201.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:22.181Z,1520511202.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T12:13:22.182Z,1520511202.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:22.570Z,1520511202.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T12:13:22.571Z,1520511202.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:22.975Z,1520511202.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T12:13:22.976Z,1520511202.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:23.379Z,1520511203.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T12:13:23.380Z,1520511203.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:23.782Z,1520511203.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T12:13:23.783Z,1520511203.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:24.183Z,1520511204.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T12:13:24.183Z,1520511204.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:24.572Z,1520511204.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T12:13:24.573Z,1520511204.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:24.974Z,1520511204.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T12:13:24.975Z,1520511204.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:25.390Z,1520511205.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T12:13:25.391Z,1520511205.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:25.790Z,1520511205.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T12:13:25.791Z,1520511205.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:26.184Z,1520511206.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T12:13:26.185Z,1520511206.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:26.575Z,1520511206.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T12:13:26.575Z,1520511206.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:26.982Z,1520511206.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T12:13:26.983Z,1520511206.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:27.384Z,1520511207.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T12:13:27.385Z,1520511207.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:27.788Z,1520511207.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T12:13:27.789Z,1520511207.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:28.181Z,1520511208.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T12:13:28.182Z,1520511208.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:28.580Z,1520511208.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T12:13:28.581Z,1520511208.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:28.976Z,1520511208.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T12:13:28.977Z,1520511208.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:29.381Z,1520511209.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T12:13:29.382Z,1520511209.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:29.794Z,1520511209.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T12:13:29.794Z,1520511209.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:30.179Z,1520511210.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T12:13:30.180Z,1520511210.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:30.572Z,1520511210.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T12:13:30.574Z,1520511210.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:30.973Z,1520511210.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T12:13:30.974Z,1520511210.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:31.380Z,1520511211.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T12:13:31.382Z,1520511211.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:31.791Z,1520511211.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T12:13:31.792Z,1520511211.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:32.222Z,1520511212.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T12:13:32.223Z,1520511212.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:32.577Z,1520511212.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:32.971Z,1520511212.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:33.382Z,1520511213.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:33.788Z,1520511213.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:34.188Z,1520511214.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:34.563Z,1520511214.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:13:34.578Z,1520511214.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:34.951Z,1520511214.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:13:34.978Z,1520511214.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:35.366Z,1520511215.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:13:35.381Z,1520511215.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:35.766Z,1520511215.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:13:35.780Z,1520511215.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:36.161Z,1520511216.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:13:36.184Z,1520511216.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:36.548Z,1520511216.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:13:36.583Z,1520511216.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:36.943Z,1520511216.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:13:36.974Z,1520511216.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:37.365Z,1520511217.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:13:37.381Z,1520511217.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:37.769Z,1520511217.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:13:37.784Z,1520511217.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:38.191Z,1520511218.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:38.576Z,1520511218.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:38.976Z,1520511218.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:39.389Z,1520511219.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:39.788Z,1520511219.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:40.184Z,1520511220.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:40.578Z,1520511220.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:40.976Z,1520511220.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:41.383Z,1520511221.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:41.781Z,1520511221.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:42.181Z,1520511222.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:42.575Z,1520511222.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:42.982Z,1520511222.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:43.398Z,1520511223.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:43.790Z,1520511223.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:44.190Z,1520511224.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:44.610Z,1520511224.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:44.964Z,1520511224.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:45.391Z,1520511225.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:45.794Z,1520511225.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:46.191Z,1520511226.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:46.548Z,1520511226.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:13:46.563Z,1520511226.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:46.948Z,1520511226.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:13:46.964Z,1520511226.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:47.365Z,1520511227.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:13:47.389Z,1520511227.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:47.765Z,1520511227.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:13:47.789Z,1520511227.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:48.154Z,1520511228.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:13:48.170Z,1520511228.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:48.553Z,1520511228.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:13:48.568Z,1520511228.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:48.951Z,1520511228.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:13:48.966Z,1520511228.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:49.361Z,1520511229.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:13:49.393Z,1520511229.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:49.769Z,1520511229.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:13:49.800Z,1520511229.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:50.198Z,1520511230.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:50.568Z,1520511230.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:50.968Z,1520511230.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:51.399Z,1520511231.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:51.780Z,1520511231.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:52.184Z,1520511232.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:52.574Z,1520511232.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:52.974Z,1520511232.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:52.977Z,1520511232.977 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T12:08:52.6Z
2018-03-08T12:13:52.978Z,1520511232.978 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T12:13:52.978Z,1520511232.978 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T12:13:53.375Z,1520511233.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:53.869Z,1520511233.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:56.881Z,1520511236.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:57.018Z,1520511237.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:57.329Z,1520511237.329 [DataOverHttps](INFO): Sending 124 bytes from file Logs/20180308T074127/Courier0104.lzma
2018-03-08T12:13:57.379Z,1520511237.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:57.776Z,1520511237.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:58.123Z,1520511238.123 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0104.lzma.bak
2018-03-08T12:13:58.123Z,1520511238.123 [DataOverHttps](INFO): SBD MOMSN=7985553
2018-03-08T12:13:58.194Z,1520511238.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:58.766Z,1520511238.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:58.976Z,1520511238.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:13:59.377Z,1520511239.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:02.487Z,1520511242.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:02.622Z,1520511242.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:03.013Z,1520511243.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:03.409Z,1520511243.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:03.811Z,1520511243.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:04.206Z,1520511244.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:04.606Z,1520511244.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:07.703Z,1520511247.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:07.827Z,1520511247.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:08.146Z,1520511248.146 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0105.lzma
2018-03-08T12:14:08.220Z,1520511248.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:08.601Z,1520511248.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:08.931Z,1520511248.931 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0105.lzma.bak
2018-03-08T12:14:08.931Z,1520511248.931 [DataOverHttps](INFO): SBD MOMSN=7985558
2018-03-08T12:14:09.008Z,1520511249.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:09.555Z,1520511249.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:09.559Z,1520511249.559 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T12:14:09.559Z,1520511249.559 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T12:14:09.559Z,1520511249.559 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T12:14:09.778Z,1520511249.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:10.175Z,1520511250.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:13.279Z,1520511253.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:13.422Z,1520511253.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:13.808Z,1520511253.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:14.210Z,1520511254.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:14.576Z,1520511254.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:14.978Z,1520511254.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:15.410Z,1520511255.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:15.788Z,1520511255.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:16.208Z,1520511256.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:16.579Z,1520511256.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:16.982Z,1520511256.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:17.407Z,1520511257.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:17.806Z,1520511257.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:18.183Z,1520511258.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:18.582Z,1520511258.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:18.978Z,1520511258.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:19.377Z,1520511259.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:19.806Z,1520511259.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:20.208Z,1520511260.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:20.575Z,1520511260.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:20.979Z,1520511260.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:21.388Z,1520511261.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:21.788Z,1520511261.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:22.207Z,1520511262.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:22.579Z,1520511262.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:22.976Z,1520511262.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:23.405Z,1520511263.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:23.808Z,1520511263.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:24.187Z,1520511264.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:24.586Z,1520511264.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:24.979Z,1520511264.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:25.381Z,1520511265.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:25.792Z,1520511265.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:26.184Z,1520511266.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:26.581Z,1520511266.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:26.983Z,1520511266.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:27.384Z,1520511267.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:27.810Z,1520511267.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:28.214Z,1520511268.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:28.583Z,1520511268.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:28.975Z,1520511268.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:29.385Z,1520511269.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:29.809Z,1520511269.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:30.190Z,1520511270.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:30.583Z,1520511270.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:30.982Z,1520511270.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:31.387Z,1520511271.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:31.788Z,1520511271.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:32.188Z,1520511272.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:32.578Z,1520511272.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:32.984Z,1520511272.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:33.389Z,1520511273.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:33.787Z,1520511273.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:34.211Z,1520511274.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:34.588Z,1520511274.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:34.986Z,1520511274.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:35.394Z,1520511275.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:35.788Z,1520511275.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:36.185Z,1520511276.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:36.643Z,1520511276.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:36.978Z,1520511276.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:37.391Z,1520511277.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:37.784Z,1520511277.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:38.189Z,1520511278.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:38.579Z,1520511278.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:38.979Z,1520511278.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:39.433Z,1520511279.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:39.794Z,1520511279.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:40.185Z,1520511280.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:40.611Z,1520511280.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:40.968Z,1520511280.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:41.391Z,1520511281.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:41.822Z,1520511281.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:42.189Z,1520511282.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:42.591Z,1520511282.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:42.991Z,1520511282.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:43.388Z,1520511283.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:43.788Z,1520511283.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:44.194Z,1520511284.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:44.583Z,1520511284.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:44.984Z,1520511284.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:45.389Z,1520511285.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:45.792Z,1520511285.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:46.194Z,1520511286.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:46.588Z,1520511286.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:46.984Z,1520511286.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:47.390Z,1520511287.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:47.789Z,1520511287.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:48.188Z,1520511288.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:48.586Z,1520511288.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:48.984Z,1520511288.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:49.389Z,1520511289.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:49.793Z,1520511289.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:50.189Z,1520511290.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:50.587Z,1520511290.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:50.983Z,1520511290.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:51.395Z,1520511291.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:51.789Z,1520511291.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:52.199Z,1520511292.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:52.582Z,1520511292.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:52.981Z,1520511292.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:53.391Z,1520511293.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:53.791Z,1520511293.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:54.201Z,1520511294.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:54.598Z,1520511294.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:54.977Z,1520511294.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:55.400Z,1520511295.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:55.799Z,1520511295.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:56.197Z,1520511296.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:56.574Z,1520511296.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:56.998Z,1520511296.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:57.404Z,1520511297.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:57.801Z,1520511297.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:58.207Z,1520511298.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:58.579Z,1520511298.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:58.981Z,1520511298.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:59.402Z,1520511299.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:14:59.807Z,1520511299.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:00.181Z,1520511300.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:00.580Z,1520511300.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:00.978Z,1520511300.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:01.406Z,1520511301.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:01.805Z,1520511301.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:02.206Z,1520511302.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:02.576Z,1520511302.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:02.979Z,1520511302.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:03.407Z,1520511303.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:03.806Z,1520511303.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:04.206Z,1520511304.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:04.579Z,1520511304.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:04.979Z,1520511304.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:05.404Z,1520511305.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:05.807Z,1520511305.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:06.205Z,1520511306.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:06.584Z,1520511306.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:06.977Z,1520511306.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:07.427Z,1520511307.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:07.822Z,1520511307.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:08.192Z,1520511308.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:08.583Z,1520511308.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:08.981Z,1520511308.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:09.389Z,1520511309.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:09.795Z,1520511309.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:10.218Z,1520511310.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:13.281Z,1520511313.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:13.427Z,1520511313.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:13.782Z,1520511313.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:14.177Z,1520511314.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:14.576Z,1520511314.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:14.951Z,1520511314.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:15.348Z,1520511315.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:15.749Z,1520511315.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:16.148Z,1520511316.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:16.579Z,1520511316.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:16.979Z,1520511316.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:17.378Z,1520511317.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:17.753Z,1520511317.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:18.147Z,1520511318.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:18.555Z,1520511318.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:18.951Z,1520511318.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:19.353Z,1520511319.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:19.778Z,1520511319.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:20.156Z,1520511320.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:20.555Z,1520511320.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:20.952Z,1520511320.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:21.353Z,1520511321.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:21.778Z,1520511321.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:22.153Z,1520511322.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:22.553Z,1520511322.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:22.952Z,1520511322.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:23.378Z,1520511323.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:23.755Z,1520511323.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:24.153Z,1520511324.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:24.550Z,1520511324.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:24.948Z,1520511324.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:25.353Z,1520511325.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:25.778Z,1520511325.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:26.151Z,1520511326.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:26.555Z,1520511326.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:26.953Z,1520511326.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:27.360Z,1520511327.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:27.755Z,1520511327.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:28.157Z,1520511328.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:28.550Z,1520511328.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:28.947Z,1520511328.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:29.360Z,1520511329.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:29.760Z,1520511329.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:30.165Z,1520511330.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:30.552Z,1520511330.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:30.954Z,1520511330.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:31.366Z,1520511331.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:31.761Z,1520511331.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:32.166Z,1520511332.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:32.550Z,1520511332.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:32.949Z,1520511332.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:33.367Z,1520511333.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:33.756Z,1520511333.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:34.166Z,1520511334.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:34.555Z,1520511334.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:34.954Z,1520511334.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:35.360Z,1520511335.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:35.763Z,1520511335.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:36.165Z,1520511336.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:36.555Z,1520511336.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:36.953Z,1520511336.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:37.359Z,1520511337.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:37.764Z,1520511337.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:38.155Z,1520511338.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:38.552Z,1520511338.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:38.953Z,1520511338.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:39.356Z,1520511339.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:39.768Z,1520511339.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:40.173Z,1520511340.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:40.555Z,1520511340.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:40.962Z,1520511340.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:41.361Z,1520511341.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:41.765Z,1520511341.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:42.161Z,1520511342.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:42.552Z,1520511342.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:42.963Z,1520511342.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:43.359Z,1520511343.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:43.766Z,1520511343.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:44.165Z,1520511344.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:44.558Z,1520511344.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:44.952Z,1520511344.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:45.351Z,1520511345.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:45.765Z,1520511345.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:46.164Z,1520511346.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:46.565Z,1520511346.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:46.956Z,1520511346.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:47.355Z,1520511347.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:47.748Z,1520511347.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:48.151Z,1520511348.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:48.566Z,1520511348.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:48.968Z,1520511348.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:49.361Z,1520511349.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:49.751Z,1520511349.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:50.153Z,1520511350.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:50.559Z,1520511350.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:50.951Z,1520511350.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:51.365Z,1520511351.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:51.768Z,1520511351.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:52.161Z,1520511352.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:52.558Z,1520511352.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:52.957Z,1520511352.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:53.354Z,1520511353.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:53.760Z,1520511353.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:54.162Z,1520511354.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:54.566Z,1520511354.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:54.946Z,1520511354.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:55.349Z,1520511355.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:55.762Z,1520511355.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:56.162Z,1520511356.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:56.568Z,1520511356.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:56.968Z,1520511356.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:57.362Z,1520511357.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:57.766Z,1520511357.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:58.166Z,1520511358.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:58.564Z,1520511358.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:58.961Z,1520511358.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:59.361Z,1520511359.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:15:59.771Z,1520511359.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:00.170Z,1520511360.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:00.563Z,1520511360.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:00.964Z,1520511360.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:01.349Z,1520511361.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:01.743Z,1520511361.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:02.173Z,1520511362.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:02.569Z,1520511362.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:02.975Z,1520511362.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:03.369Z,1520511363.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:03.743Z,1520511363.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:04.150Z,1520511364.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:04.542Z,1520511364.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:04.954Z,1520511364.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:05.375Z,1520511365.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:05.776Z,1520511365.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:06.149Z,1520511366.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:06.551Z,1520511366.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:06.950Z,1520511366.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:07.349Z,1520511367.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:07.775Z,1520511367.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:08.171Z,1520511368.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:08.552Z,1520511368.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:08.947Z,1520511368.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:09.371Z,1520511369.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:09.773Z,1520511369.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:10.169Z,1520511370.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:10.551Z,1520511370.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:13.649Z,1520511373.649 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:13.650Z,1520511373.650 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91
2018-03-08T12:16:13.650Z,1520511373.650 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T12:16:13.653Z,1520511373.653 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:13.654Z,1520511373.654 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91
2018-03-08T12:16:13.654Z,1520511373.654 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T12:16:13.655Z,1520511373.655 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:13.656Z,1520511373.656 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 91
2018-03-08T12:16:13.656Z,1520511373.656 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T12:16:13.692Z,1520511373.692 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T12:16:13.692Z,1520511373.692 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T12:16:13.697Z,1520511373.697 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T12:16:13.815Z,1520511373.815 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T12:16:13.815Z,1520511373.815 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91
2018-03-08T12:16:13.815Z,1520511373.815 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T12:16:13.815Z,1520511373.815 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91
2018-03-08T12:16:13.816Z,1520511373.816 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T12:16:13.816Z,1520511373.816 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 91
2018-03-08T12:16:14.171Z,1520511374.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T12:16:14.172Z,1520511374.172 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:16:14.172Z,1520511374.172 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:16:14.173Z,1520511374.173 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T12:16:14.173Z,1520511374.173 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:16:14.173Z,1520511374.173 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:16:14.174Z,1520511374.174 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T12:16:14.174Z,1520511374.174 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:16:14.174Z,1520511374.174 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:16:14.572Z,1520511374.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-03-08T12:16:14.573Z,1520511374.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:14.961Z,1520511374.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-03-08T12:16:14.962Z,1520511374.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:15.356Z,1520511375.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-03-08T12:16:15.357Z,1520511375.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:15.760Z,1520511375.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-03-08T12:16:15.761Z,1520511375.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:16.161Z,1520511376.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-03-08T12:16:16.162Z,1520511376.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:16.563Z,1520511376.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-03-08T12:16:16.564Z,1520511376.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:16.971Z,1520511376.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-03-08T12:16:16.972Z,1520511376.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:17.374Z,1520511377.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-08T12:16:17.375Z,1520511377.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:17.759Z,1520511377.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-03-08T12:16:17.760Z,1520511377.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:18.161Z,1520511378.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-03-08T12:16:18.162Z,1520511378.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:18.566Z,1520511378.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-08T12:16:18.567Z,1520511378.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:18.959Z,1520511378.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-08T12:16:18.960Z,1520511378.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:19.366Z,1520511379.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T12:16:19.367Z,1520511379.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:19.768Z,1520511379.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T12:16:19.769Z,1520511379.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:20.170Z,1520511380.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-08T12:16:20.171Z,1520511380.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:20.560Z,1520511380.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-08T12:16:20.561Z,1520511380.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:20.965Z,1520511380.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-08T12:16:20.966Z,1520511380.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:21.374Z,1520511381.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-08T12:16:21.375Z,1520511381.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:21.772Z,1520511381.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-08T12:16:21.773Z,1520511381.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:22.174Z,1520511382.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-08T12:16:22.175Z,1520511382.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:22.566Z,1520511382.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-08T12:16:22.567Z,1520511382.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:22.966Z,1520511382.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-08T12:16:22.967Z,1520511382.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:23.369Z,1520511383.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-08T12:16:23.370Z,1520511383.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:23.769Z,1520511383.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T12:16:23.770Z,1520511383.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:24.172Z,1520511384.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-08T12:16:24.173Z,1520511384.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:24.564Z,1520511384.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T12:16:24.565Z,1520511384.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:24.965Z,1520511384.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T12:16:24.966Z,1520511384.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:25.374Z,1520511385.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T12:16:25.375Z,1520511385.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:25.774Z,1520511385.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T12:16:25.775Z,1520511385.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:26.170Z,1520511386.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T12:16:26.171Z,1520511386.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:26.560Z,1520511386.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-08T12:16:26.561Z,1520511386.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:26.961Z,1520511386.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-08T12:16:26.962Z,1520511386.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:27.367Z,1520511387.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-08T12:16:27.368Z,1520511387.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:27.766Z,1520511387.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-08T12:16:27.767Z,1520511387.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:28.167Z,1520511388.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-08T12:16:28.168Z,1520511388.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:28.565Z,1520511388.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T12:16:28.566Z,1520511388.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:28.952Z,1520511388.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-08T12:16:28.957Z,1520511388.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:29.371Z,1520511389.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T12:16:29.372Z,1520511389.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:29.772Z,1520511389.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T12:16:29.773Z,1520511389.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:30.175Z,1520511390.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T12:16:30.176Z,1520511390.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:30.565Z,1520511390.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T12:16:30.566Z,1520511390.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:30.958Z,1520511390.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-08T12:16:30.959Z,1520511390.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:31.361Z,1520511391.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T12:16:31.362Z,1520511391.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:31.772Z,1520511391.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-08T12:16:31.773Z,1520511391.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:32.170Z,1520511392.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-08T12:16:32.171Z,1520511392.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:32.560Z,1520511392.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T12:16:32.561Z,1520511392.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:32.962Z,1520511392.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T12:16:32.963Z,1520511392.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:33.366Z,1520511393.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T12:16:33.367Z,1520511393.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:33.769Z,1520511393.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:34.171Z,1520511394.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:34.560Z,1520511394.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:34.951Z,1520511394.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:35.373Z,1520511395.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:35.775Z,1520511395.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:36.169Z,1520511396.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:36.561Z,1520511396.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:36.962Z,1520511396.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:37.375Z,1520511397.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:37.775Z,1520511397.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:38.170Z,1520511398.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:38.563Z,1520511398.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:38.961Z,1520511398.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:39.367Z,1520511399.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:39.770Z,1520511399.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:40.167Z,1520511400.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:40.570Z,1520511400.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:40.960Z,1520511400.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:41.370Z,1520511401.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:41.770Z,1520511401.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:42.175Z,1520511402.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:42.562Z,1520511402.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:42.955Z,1520511402.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:43.375Z,1520511403.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:43.772Z,1520511403.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:44.164Z,1520511404.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:44.567Z,1520511404.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:44.965Z,1520511404.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:45.367Z,1520511405.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:45.775Z,1520511405.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:46.169Z,1520511406.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:46.566Z,1520511406.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:46.959Z,1520511406.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:47.367Z,1520511407.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:47.769Z,1520511407.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:48.175Z,1520511408.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:48.565Z,1520511408.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:48.961Z,1520511408.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:49.369Z,1520511409.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:49.778Z,1520511409.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:50.175Z,1520511410.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:50.560Z,1520511410.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:50.963Z,1520511410.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:51.369Z,1520511411.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:51.775Z,1520511411.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:52.176Z,1520511412.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:52.565Z,1520511412.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:52.965Z,1520511412.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:53.375Z,1520511413.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:53.773Z,1520511413.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:54.169Z,1520511414.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:54.563Z,1520511414.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:54.974Z,1520511414.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:55.387Z,1520511415.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:55.775Z,1520511415.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:56.174Z,1520511416.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:56.567Z,1520511416.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:56.971Z,1520511416.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:57.373Z,1520511417.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:57.776Z,1520511417.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:58.175Z,1520511418.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:58.554Z,1520511418.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:58.947Z,1520511418.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:59.372Z,1520511419.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:16:59.776Z,1520511419.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:00.172Z,1520511420.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:00.578Z,1520511420.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:00.950Z,1520511420.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:01.372Z,1520511421.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:01.776Z,1520511421.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:02.171Z,1520511422.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:02.556Z,1520511422.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:02.951Z,1520511422.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:03.380Z,1520511423.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:03.776Z,1520511423.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:04.189Z,1520511424.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:04.556Z,1520511424.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:04.955Z,1520511424.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:05.382Z,1520511425.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:05.784Z,1520511425.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:06.183Z,1520511426.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:06.554Z,1520511426.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:06.954Z,1520511426.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:07.383Z,1520511427.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:07.761Z,1520511427.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:08.183Z,1520511428.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:08.585Z,1520511428.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:08.958Z,1520511428.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:09.382Z,1520511429.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:09.783Z,1520511429.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:10.184Z,1520511430.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:10.554Z,1520511430.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:13.685Z,1520511433.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:13.810Z,1520511433.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:14.182Z,1520511434.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:14.583Z,1520511434.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:14.970Z,1520511434.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:15.358Z,1520511435.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:15.758Z,1520511435.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:16.162Z,1520511436.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:16.570Z,1520511436.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:16.974Z,1520511436.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:17.371Z,1520511437.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:17.753Z,1520511437.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:18.152Z,1520511438.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:18.565Z,1520511438.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:18.956Z,1520511438.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:19.361Z,1520511439.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:19.770Z,1520511439.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:20.167Z,1520511440.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:20.560Z,1520511440.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:20.955Z,1520511440.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:21.362Z,1520511441.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:21.765Z,1520511441.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:22.163Z,1520511442.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:22.558Z,1520511442.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:22.965Z,1520511442.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:23.365Z,1520511443.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:23.775Z,1520511443.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:24.163Z,1520511444.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:24.560Z,1520511444.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:24.960Z,1520511444.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:25.368Z,1520511445.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:25.771Z,1520511445.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:26.170Z,1520511446.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:26.557Z,1520511446.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:26.966Z,1520511446.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:27.372Z,1520511447.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:27.775Z,1520511447.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:28.172Z,1520511448.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:28.574Z,1520511448.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:28.947Z,1520511448.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:29.372Z,1520511449.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:29.769Z,1520511449.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:30.156Z,1520511450.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:30.555Z,1520511450.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:30.954Z,1520511450.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:31.353Z,1520511451.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:31.777Z,1520511451.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:32.172Z,1520511452.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:32.553Z,1520511452.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:32.955Z,1520511452.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:33.323Z,1520511453.323 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T12:17:33.323Z,1520511453.323 [NAL9602] Data Fault, FailCount= 1
2018-03-08T12:17:33.323Z,1520511453.323 [NAL9602](ERROR): Data Fault
2018-03-08T12:17:33.354Z,1520511453.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:33.407Z,1520511453.407 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T12:17:33.718Z,1520511453.718 [NAL9602](INFO): Powering down
2018-03-08T12:17:33.763Z,1520511453.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:34.158Z,1520511454.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:34.555Z,1520511454.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:34.568Z,1520511454.568 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T12:17:34.568Z,1520511454.568 [NAL9602] No Fault, FailCount= 1
2018-03-08T12:17:34.957Z,1520511454.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:35.353Z,1520511455.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:35.754Z,1520511455.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:36.150Z,1520511456.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:36.561Z,1520511456.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:36.956Z,1520511456.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:37.350Z,1520511457.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:37.753Z,1520511457.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:38.148Z,1520511458.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:38.556Z,1520511458.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:38.958Z,1520511458.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:39.355Z,1520511459.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:39.757Z,1520511459.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:40.159Z,1520511460.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:40.556Z,1520511460.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:40.957Z,1520511460.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:41.353Z,1520511461.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:41.753Z,1520511461.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:42.150Z,1520511462.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:42.553Z,1520511462.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:42.954Z,1520511462.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:43.357Z,1520511463.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:43.762Z,1520511463.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:44.179Z,1520511464.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:44.561Z,1520511464.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:44.963Z,1520511464.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:45.371Z,1520511465.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:45.746Z,1520511465.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:46.170Z,1520511466.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:46.595Z,1520511466.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:46.942Z,1520511466.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:47.370Z,1520511467.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:47.751Z,1520511467.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:48.143Z,1520511468.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:48.574Z,1520511468.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:48.954Z,1520511468.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:49.370Z,1520511469.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:49.758Z,1520511469.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:50.158Z,1520511470.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:50.552Z,1520511470.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:50.969Z,1520511470.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:51.357Z,1520511471.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:51.752Z,1520511471.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:52.162Z,1520511472.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:52.558Z,1520511472.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:52.953Z,1520511472.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:53.376Z,1520511473.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:53.762Z,1520511473.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:54.159Z,1520511474.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:54.560Z,1520511474.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:54.957Z,1520511474.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:55.363Z,1520511475.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:55.762Z,1520511475.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:56.161Z,1520511476.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:56.551Z,1520511476.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:56.969Z,1520511476.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:57.368Z,1520511477.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:57.746Z,1520511477.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:58.149Z,1520511478.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:58.553Z,1520511478.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:58.947Z,1520511478.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:59.353Z,1520511479.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:17:59.753Z,1520511479.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:00.142Z,1520511480.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:00.549Z,1520511480.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:00.946Z,1520511480.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:01.342Z,1520511481.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:01.750Z,1520511481.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:02.153Z,1520511482.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:02.546Z,1520511482.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:02.950Z,1520511482.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:03.353Z,1520511483.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:03.746Z,1520511483.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:04.118Z,1520511484.118 [NAL9602](INFO): Powering up NAL9602
2018-03-08T12:18:04.150Z,1520511484.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:04.553Z,1520511484.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:04.951Z,1520511484.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:05.349Z,1520511485.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:05.750Z,1520511485.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:06.146Z,1520511486.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:06.553Z,1520511486.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:06.949Z,1520511486.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:07.345Z,1520511487.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:07.750Z,1520511487.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:08.153Z,1520511488.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:08.547Z,1520511488.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:08.953Z,1520511488.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:09.353Z,1520511489.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:09.747Z,1520511489.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:10.152Z,1520511490.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:10.546Z,1520511490.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:10.953Z,1520511490.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:14.053Z,1520511494.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:14.159Z,1520511494.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:14.562Z,1520511494.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:14.902Z,1520511494.902 [NAL9602](INFO): NAL9602 initialized
2018-03-08T12:18:14.954Z,1520511494.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:15.341Z,1520511495.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:15.748Z,1520511495.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:16.148Z,1520511496.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:16.555Z,1520511496.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:16.946Z,1520511496.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:17.344Z,1520511497.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:17.745Z,1520511497.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:18.154Z,1520511498.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:18.548Z,1520511498.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:18.949Z,1520511498.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:19.350Z,1520511499.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:19.742Z,1520511499.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:20.143Z,1520511500.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:20.554Z,1520511500.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:20.955Z,1520511500.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:21.359Z,1520511501.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:21.753Z,1520511501.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:22.145Z,1520511502.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:22.551Z,1520511502.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:22.958Z,1520511502.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:23.351Z,1520511503.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:23.754Z,1520511503.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:24.143Z,1520511504.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:24.527Z,1520511504.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:24.956Z,1520511504.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:25.362Z,1520511505.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:25.752Z,1520511505.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:26.130Z,1520511506.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:26.534Z,1520511506.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:26.968Z,1520511506.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:27.360Z,1520511507.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:27.762Z,1520511507.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:28.139Z,1520511508.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:28.539Z,1520511508.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:28.960Z,1520511508.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:29.361Z,1520511509.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:29.759Z,1520511509.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:30.140Z,1520511510.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:30.546Z,1520511510.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:30.942Z,1520511510.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:31.352Z,1520511511.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:31.750Z,1520511511.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:32.141Z,1520511512.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:32.540Z,1520511512.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:32.946Z,1520511512.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:33.349Z,1520511513.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:33.750Z,1520511513.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:34.142Z,1520511514.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:34.542Z,1520511514.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:34.944Z,1520511514.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:35.349Z,1520511515.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:35.751Z,1520511515.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:36.142Z,1520511516.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:36.546Z,1520511516.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:36.945Z,1520511516.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:37.349Z,1520511517.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:37.745Z,1520511517.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:38.140Z,1520511518.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:38.544Z,1520511518.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:38.951Z,1520511518.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:39.351Z,1520511519.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:39.754Z,1520511519.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:40.142Z,1520511520.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:40.538Z,1520511520.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:40.955Z,1520511520.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:41.351Z,1520511521.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:41.751Z,1520511521.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:42.143Z,1520511522.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:42.540Z,1520511522.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:42.948Z,1520511522.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:43.353Z,1520511523.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:43.751Z,1520511523.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:44.138Z,1520511524.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:44.540Z,1520511524.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:44.948Z,1520511524.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:45.351Z,1520511525.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:45.748Z,1520511525.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:46.139Z,1520511526.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:46.537Z,1520511526.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:46.954Z,1520511526.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:47.351Z,1520511527.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:47.751Z,1520511527.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:48.145Z,1520511528.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:48.539Z,1520511528.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:48.948Z,1520511528.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:49.352Z,1520511529.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:49.751Z,1520511529.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:50.143Z,1520511530.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:50.541Z,1520511530.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:50.954Z,1520511530.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:51.351Z,1520511531.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:51.754Z,1520511531.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:52.143Z,1520511532.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:52.545Z,1520511532.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:52.958Z,1520511532.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:53.355Z,1520511533.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:53.752Z,1520511533.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:54.146Z,1520511534.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:54.550Z,1520511534.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:54.958Z,1520511534.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:55.357Z,1520511535.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:55.758Z,1520511535.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:56.144Z,1520511536.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:56.539Z,1520511536.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:56.950Z,1520511536.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:57.352Z,1520511537.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:57.754Z,1520511537.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:58.145Z,1520511538.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:58.541Z,1520511538.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:58.955Z,1520511538.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:59.357Z,1520511539.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:18:59.750Z,1520511539.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:00.147Z,1520511540.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:00.515Z,1520511540.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:00.551Z,1520511540.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:00.925Z,1520511540.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:00.953Z,1520511540.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:01.343Z,1520511541.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:01.362Z,1520511541.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:01.740Z,1520511541.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:01.755Z,1520511541.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:02.111Z,1520511542.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:02.127Z,1520511542.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:02.518Z,1520511542.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:02.556Z,1520511542.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:02.925Z,1520511542.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:02.958Z,1520511542.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:03.329Z,1520511543.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:03.352Z,1520511543.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:03.729Z,1520511543.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:03.762Z,1520511543.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:04.130Z,1520511544.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:04.530Z,1520511544.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:04.958Z,1520511544.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:05.348Z,1520511545.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:05.367Z,1520511545.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:05.732Z,1520511545.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:05.758Z,1520511545.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:06.127Z,1520511546.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:06.159Z,1520511546.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:06.523Z,1520511546.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:06.539Z,1520511546.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:06.938Z,1520511546.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:06.967Z,1520511546.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:07.334Z,1520511547.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:07.361Z,1520511547.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:07.738Z,1520511547.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:07.769Z,1520511547.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:08.126Z,1520511548.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:08.142Z,1520511548.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:08.523Z,1520511548.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:08.540Z,1520511548.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:08.950Z,1520511548.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:09.348Z,1520511549.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:09.750Z,1520511549.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:10.127Z,1520511550.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:10.143Z,1520511550.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:10.146Z,1520511550.146 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T12:19:10.146Z,1520511550.146 [Default:CheckIn:C.Wait] Stopped
2018-03-08T12:19:10.146Z,1520511550.146 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T12:19:10.146Z,1520511550.146 [Default:CheckIn:D] Running Loop=1
2018-03-08T12:19:10.523Z,1520511550.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:10.539Z,1520511550.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:10.542Z,1520511550.542 [Default:CheckIn:D] Stopped
2018-03-08T12:19:10.542Z,1520511550.542 [Default:CheckIn:E] Running Loop=1
2018-03-08T12:19:10.933Z,1520511550.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:10.959Z,1520511550.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:10.963Z,1520511550.963 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 273.428939 min 
2018-03-08T12:19:10.963Z,1520511550.963 [Default:CheckIn:E] Stopped
2018-03-08T12:19:10.963Z,1520511550.963 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T12:19:10.963Z,1520511550.963 [Default:CheckIn] Stopped
2018-03-08T12:19:10.963Z,1520511550.963 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T12:19:10.963Z,1520511550.963 [Default:CheckIn](INFO): Running loop #27
2018-03-08T12:19:10.963Z,1520511550.963 [Default:CheckIn] Running Loop=27
2018-03-08T12:19:10.964Z,1520511550.964 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T12:19:10.964Z,1520511550.964 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T12:19:11.340Z,1520511551.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:11.355Z,1520511551.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:14.425Z,1520511554.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:14.453Z,1520511554.453 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:14.453Z,1520511554.453 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92
2018-03-08T12:19:14.453Z,1520511554.453 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T12:19:14.456Z,1520511554.456 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:14.456Z,1520511554.456 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92
2018-03-08T12:19:14.456Z,1520511554.456 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T12:19:14.458Z,1520511554.458 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:14.458Z,1520511554.458 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 92
2018-03-08T12:19:14.458Z,1520511554.458 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T12:19:14.470Z,1520511554.470 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T12:19:14.470Z,1520511554.470 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T12:19:14.470Z,1520511554.470 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T12:19:14.560Z,1520511554.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:14.615Z,1520511554.615 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T12:19:14.615Z,1520511554.615 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92
2018-03-08T12:19:14.615Z,1520511554.615 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T12:19:14.615Z,1520511554.615 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92
2018-03-08T12:19:14.616Z,1520511554.616 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T12:19:14.616Z,1520511554.616 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 92
2018-03-08T12:19:14.915Z,1520511554.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:14.930Z,1520511554.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T12:19:14.930Z,1520511554.930 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:19:14.930Z,1520511554.930 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:19:14.931Z,1520511554.931 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T12:19:14.931Z,1520511554.931 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:19:14.931Z,1520511554.931 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:19:14.932Z,1520511554.932 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T12:19:14.932Z,1520511554.932 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:19:14.933Z,1520511554.933 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:19:15.315Z,1520511555.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:15.330Z,1520511555.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-03-08T12:19:15.330Z,1520511555.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:15.713Z,1520511555.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:15.729Z,1520511555.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-03-08T12:19:15.729Z,1520511555.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:16.121Z,1520511556.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:16.137Z,1520511556.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-03-08T12:19:16.138Z,1520511556.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:16.539Z,1520511556.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-03-08T12:19:16.540Z,1520511556.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:16.937Z,1520511556.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-03-08T12:19:16.938Z,1520511556.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:17.328Z,1520511557.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-03-08T12:19:17.329Z,1520511557.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:17.733Z,1520511557.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-03-08T12:19:17.734Z,1520511557.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:18.129Z,1520511558.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-08T12:19:18.130Z,1520511558.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:18.532Z,1520511558.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-03-08T12:19:18.533Z,1520511558.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:18.935Z,1520511558.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-03-08T12:19:18.936Z,1520511558.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:19.339Z,1520511559.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-08T12:19:19.339Z,1520511559.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:19.736Z,1520511559.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-08T12:19:19.737Z,1520511559.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:20.134Z,1520511560.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T12:19:20.135Z,1520511560.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:20.526Z,1520511560.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T12:19:20.527Z,1520511560.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:20.948Z,1520511560.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-08T12:19:20.969Z,1520511560.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:21.339Z,1520511561.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-08T12:19:21.340Z,1520511561.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:21.739Z,1520511561.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-08T12:19:21.740Z,1520511561.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:22.131Z,1520511562.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-08T12:19:22.132Z,1520511562.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:22.528Z,1520511562.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-08T12:19:22.529Z,1520511562.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:22.940Z,1520511562.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-08T12:19:22.941Z,1520511562.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:23.339Z,1520511563.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-08T12:19:23.339Z,1520511563.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:23.739Z,1520511563.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-08T12:19:23.740Z,1520511563.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:24.130Z,1520511564.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-08T12:19:24.131Z,1520511564.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:24.528Z,1520511564.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T12:19:24.533Z,1520511564.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:24.944Z,1520511564.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-08T12:19:24.945Z,1520511564.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:25.340Z,1520511565.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T12:19:25.341Z,1520511565.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:25.743Z,1520511565.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T12:19:25.744Z,1520511565.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:26.134Z,1520511566.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T12:19:26.135Z,1520511566.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:26.532Z,1520511566.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T12:19:26.534Z,1520511566.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:26.946Z,1520511566.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T12:19:26.947Z,1520511566.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:27.342Z,1520511567.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-08T12:19:27.343Z,1520511567.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:27.740Z,1520511567.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-08T12:19:27.741Z,1520511567.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:28.132Z,1520511568.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-08T12:19:28.133Z,1520511568.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:28.529Z,1520511568.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-08T12:19:28.530Z,1520511568.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:28.943Z,1520511568.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-08T12:19:28.944Z,1520511568.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:29.350Z,1520511569.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T12:19:29.351Z,1520511569.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:29.744Z,1520511569.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-08T12:19:29.745Z,1520511569.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:30.129Z,1520511570.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T12:19:30.130Z,1520511570.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:30.539Z,1520511570.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T12:19:30.540Z,1520511570.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:30.939Z,1520511570.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T12:19:30.940Z,1520511570.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:31.339Z,1520511571.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T12:19:31.340Z,1520511571.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:31.741Z,1520511571.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-08T12:19:31.741Z,1520511571.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:32.134Z,1520511572.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T12:19:32.135Z,1520511572.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:32.529Z,1520511572.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-08T12:19:32.530Z,1520511572.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:32.939Z,1520511572.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-08T12:19:32.940Z,1520511572.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:33.339Z,1520511573.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T12:19:33.340Z,1520511573.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:33.745Z,1520511573.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T12:19:33.746Z,1520511573.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:34.131Z,1520511574.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T12:19:34.132Z,1520511574.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:34.515Z,1520511574.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:34.531Z,1520511574.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:34.929Z,1520511574.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:34.950Z,1520511574.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:35.328Z,1520511575.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:35.350Z,1520511575.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:35.750Z,1520511575.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:36.131Z,1520511576.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:36.539Z,1520511576.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:36.941Z,1520511576.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:37.349Z,1520511577.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:37.741Z,1520511577.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:38.134Z,1520511578.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:38.532Z,1520511578.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:38.942Z,1520511578.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:39.345Z,1520511579.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:39.745Z,1520511579.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:40.133Z,1520511580.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:40.533Z,1520511580.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:40.950Z,1520511580.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:41.355Z,1520511581.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:41.745Z,1520511581.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:42.130Z,1520511582.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:42.539Z,1520511582.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:42.944Z,1520511582.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:43.350Z,1520511583.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:43.748Z,1520511583.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:44.130Z,1520511584.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:44.519Z,1520511584.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:44.948Z,1520511584.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:45.350Z,1520511585.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:45.750Z,1520511585.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:46.126Z,1520511586.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:46.529Z,1520511586.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:46.952Z,1520511586.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:47.354Z,1520511587.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:47.755Z,1520511587.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:48.129Z,1520511588.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:48.531Z,1520511588.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:48.966Z,1520511588.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:49.334Z,1520511589.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:49.761Z,1520511589.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:50.130Z,1520511590.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:50.525Z,1520511590.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:50.940Z,1520511590.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:51.336Z,1520511591.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:51.763Z,1520511591.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:52.131Z,1520511592.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:52.529Z,1520511592.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:52.933Z,1520511592.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:53.336Z,1520511593.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:53.730Z,1520511593.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:53.768Z,1520511593.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:54.108Z,1520511594.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:54.130Z,1520511594.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:54.512Z,1520511594.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:54.536Z,1520511594.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:54.917Z,1520511594.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:54.932Z,1520511594.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:55.317Z,1520511595.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:55.332Z,1520511595.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:55.730Z,1520511595.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:55.763Z,1520511595.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:56.116Z,1520511596.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:56.130Z,1520511596.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:56.511Z,1520511596.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:56.530Z,1520511596.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:56.917Z,1520511596.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:56.933Z,1520511596.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:57.321Z,1520511597.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:57.336Z,1520511597.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:57.717Z,1520511597.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:57.733Z,1520511597.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:58.116Z,1520511598.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:58.131Z,1520511598.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:58.516Z,1520511598.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:58.531Z,1520511598.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:58.929Z,1520511598.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:58.962Z,1520511598.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:59.321Z,1520511599.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:19:59.337Z,1520511599.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:19:59.744Z,1520511599.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:00.123Z,1520511600.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:00.541Z,1520511600.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:00.921Z,1520511600.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:00.937Z,1520511600.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:01.320Z,1520511601.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:01.335Z,1520511601.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:01.721Z,1520511601.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:01.737Z,1520511601.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:02.130Z,1520511602.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:02.528Z,1520511602.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:02.939Z,1520511602.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:03.336Z,1520511603.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:03.739Z,1520511603.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:04.130Z,1520511604.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:04.529Z,1520511604.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:04.937Z,1520511604.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:05.337Z,1520511605.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:05.720Z,1520511605.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:05.736Z,1520511605.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:06.118Z,1520511606.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:06.139Z,1520511606.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:06.517Z,1520511606.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:06.533Z,1520511606.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:06.935Z,1520511606.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:07.339Z,1520511607.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:07.739Z,1520511607.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:08.121Z,1520511608.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:08.136Z,1520511608.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:08.518Z,1520511608.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:08.539Z,1520511608.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:08.924Z,1520511608.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:08.940Z,1520511608.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:09.324Z,1520511609.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:09.346Z,1520511609.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:09.720Z,1520511609.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:09.736Z,1520511609.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:10.119Z,1520511610.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:10.135Z,1520511610.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:10.519Z,1520511610.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:10.539Z,1520511610.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:10.924Z,1520511610.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:10.946Z,1520511610.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:11.325Z,1520511611.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:11.341Z,1520511611.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:11.740Z,1520511611.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:14.830Z,1520511614.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:14.971Z,1520511614.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:15.323Z,1520511615.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:15.726Z,1520511615.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:16.123Z,1520511616.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:16.502Z,1520511616.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:16.901Z,1520511616.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:17.296Z,1520511617.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:17.700Z,1520511617.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:18.097Z,1520511618.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:18.128Z,1520511618.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:18.494Z,1520511618.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:18.521Z,1520511618.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:18.893Z,1520511618.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:18.909Z,1520511618.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:19.287Z,1520511619.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:19.302Z,1520511619.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:19.687Z,1520511619.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:19.702Z,1520511619.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:20.087Z,1520511620.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:20.103Z,1520511620.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:20.489Z,1520511620.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:20.503Z,1520511620.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:20.889Z,1520511620.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:20.904Z,1520511620.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:21.301Z,1520511621.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:21.337Z,1520511621.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:21.696Z,1520511621.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:21.718Z,1520511621.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:22.090Z,1520511622.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:22.114Z,1520511622.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:22.491Z,1520511622.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:22.511Z,1520511622.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:22.892Z,1520511622.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:22.907Z,1520511622.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:23.293Z,1520511623.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:23.308Z,1520511623.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:23.685Z,1520511623.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:23.705Z,1520511623.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:24.100Z,1520511624.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:24.134Z,1520511624.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:24.498Z,1520511624.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:24.513Z,1520511624.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:24.896Z,1520511624.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:24.911Z,1520511624.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:25.292Z,1520511625.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:25.307Z,1520511625.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:25.683Z,1520511625.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:25.707Z,1520511625.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:26.093Z,1520511626.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:26.108Z,1520511626.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:26.479Z,1520511626.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:26.506Z,1520511626.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:26.890Z,1520511626.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:26.906Z,1520511626.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:27.298Z,1520511627.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:27.318Z,1520511627.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:27.698Z,1520511627.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:27.713Z,1520511627.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:28.093Z,1520511628.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:28.121Z,1520511628.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:28.482Z,1520511628.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:28.508Z,1520511628.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:28.873Z,1520511628.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:28.906Z,1520511628.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:29.284Z,1520511629.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:29.311Z,1520511629.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:29.680Z,1520511629.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:29.706Z,1520511629.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:30.102Z,1520511630.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:30.117Z,1520511630.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:30.497Z,1520511630.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:30.513Z,1520511630.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:30.901Z,1520511630.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:30.916Z,1520511630.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:31.282Z,1520511631.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:31.309Z,1520511631.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:31.676Z,1520511631.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:31.704Z,1520511631.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:32.079Z,1520511632.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:32.110Z,1520511632.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:32.479Z,1520511632.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:32.510Z,1520511632.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:32.882Z,1520511632.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:32.908Z,1520511632.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:33.297Z,1520511633.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:33.312Z,1520511633.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:33.701Z,1520511633.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:33.722Z,1520511633.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:34.085Z,1520511634.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:34.112Z,1520511634.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:34.487Z,1520511634.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:34.513Z,1520511634.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:34.886Z,1520511634.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:34.912Z,1520511634.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:35.279Z,1520511635.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:35.310Z,1520511635.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:35.681Z,1520511635.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:35.707Z,1520511635.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:36.113Z,1520511636.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:36.520Z,1520511636.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:36.915Z,1520511636.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:37.310Z,1520511637.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:37.699Z,1520511637.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:38.112Z,1520511638.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:38.515Z,1520511638.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:38.914Z,1520511638.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:39.316Z,1520511639.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:39.717Z,1520511639.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:40.117Z,1520511640.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:40.511Z,1520511640.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:40.919Z,1520511640.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:41.318Z,1520511641.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:41.696Z,1520511641.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:42.123Z,1520511642.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:42.522Z,1520511642.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:42.920Z,1520511642.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:43.301Z,1520511643.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:43.695Z,1520511643.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:44.101Z,1520511644.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:44.501Z,1520511644.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:44.902Z,1520511644.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:45.327Z,1520511645.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:45.728Z,1520511645.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:46.100Z,1520511646.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:46.502Z,1520511646.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:46.901Z,1520511646.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:47.302Z,1520511647.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:47.701Z,1520511647.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:48.126Z,1520511648.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:48.506Z,1520511648.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:48.926Z,1520511648.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:49.299Z,1520511649.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:49.702Z,1520511649.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:50.102Z,1520511650.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:50.506Z,1520511650.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:50.900Z,1520511650.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:51.309Z,1520511651.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:51.701Z,1520511651.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:51.734Z,1520511651.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:52.089Z,1520511652.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:52.110Z,1520511652.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:52.488Z,1520511652.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:52.503Z,1520511652.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:52.888Z,1520511652.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:52.903Z,1520511652.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:53.284Z,1520511653.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:53.311Z,1520511653.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:53.688Z,1520511653.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:53.703Z,1520511653.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:54.089Z,1520511654.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:54.104Z,1520511654.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:54.501Z,1520511654.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:54.516Z,1520511654.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:54.897Z,1520511654.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:54.912Z,1520511654.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:55.291Z,1520511655.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:55.306Z,1520511655.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:55.687Z,1520511655.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:55.703Z,1520511655.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:56.092Z,1520511656.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:56.107Z,1520511656.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:56.493Z,1520511656.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:56.509Z,1520511656.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:56.891Z,1520511656.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:56.906Z,1520511656.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:57.292Z,1520511657.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:57.308Z,1520511657.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:57.694Z,1520511657.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:57.714Z,1520511657.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:58.099Z,1520511658.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:58.114Z,1520511658.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:58.490Z,1520511658.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:58.511Z,1520511658.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:58.891Z,1520511658.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:58.910Z,1520511658.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:59.291Z,1520511659.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:59.307Z,1520511659.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:20:59.692Z,1520511659.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:20:59.708Z,1520511659.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:00.114Z,1520511660.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:00.512Z,1520511660.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:00.919Z,1520511660.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:01.291Z,1520511661.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:01.306Z,1520511661.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:01.690Z,1520511661.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:01.710Z,1520511661.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:02.091Z,1520511662.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:02.107Z,1520511662.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:02.486Z,1520511662.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:02.506Z,1520511662.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:02.887Z,1520511662.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:02.908Z,1520511662.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:03.297Z,1520511663.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:03.313Z,1520511663.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:03.698Z,1520511663.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:03.713Z,1520511663.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:04.096Z,1520511664.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:04.111Z,1520511664.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:04.488Z,1520511664.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:04.512Z,1520511664.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:04.893Z,1520511664.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:04.909Z,1520511664.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:05.292Z,1520511665.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:05.308Z,1520511665.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:05.693Z,1520511665.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:05.709Z,1520511665.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:06.097Z,1520511666.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:06.113Z,1520511666.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:06.500Z,1520511666.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:06.516Z,1520511666.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:06.897Z,1520511666.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:06.913Z,1520511666.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:07.287Z,1520511667.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:07.302Z,1520511667.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:07.687Z,1520511667.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:07.713Z,1520511667.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:08.090Z,1520511668.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:08.111Z,1520511668.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:08.488Z,1520511668.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:08.503Z,1520511668.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:08.885Z,1520511668.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:08.905Z,1520511668.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:09.300Z,1520511669.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:09.316Z,1520511669.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:09.701Z,1520511669.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:09.722Z,1520511669.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:10.100Z,1520511670.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:10.115Z,1520511670.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:10.490Z,1520511670.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:10.510Z,1520511670.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:10.886Z,1520511670.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:10.901Z,1520511670.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:11.291Z,1520511671.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:11.306Z,1520511671.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:11.681Z,1520511671.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:11.704Z,1520511671.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:12.098Z,1520511672.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:12.113Z,1520511672.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:15.196Z,1520511675.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:15.212Z,1520511675.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:15.325Z,1520511675.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:15.350Z,1520511675.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:15.672Z,1520511675.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:15.703Z,1520511675.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:16.063Z,1520511676.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:16.078Z,1520511676.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:16.466Z,1520511676.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:16.486Z,1520511676.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:16.867Z,1520511676.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:16.886Z,1520511676.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:17.282Z,1520511677.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:17.311Z,1520511677.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:17.670Z,1520511677.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:17.695Z,1520511677.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:18.077Z,1520511678.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:18.093Z,1520511678.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:18.470Z,1520511678.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:18.485Z,1520511678.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:18.867Z,1520511678.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:18.882Z,1520511678.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:19.272Z,1520511679.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:19.291Z,1520511679.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:19.672Z,1520511679.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:19.686Z,1520511679.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:20.076Z,1520511680.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:20.092Z,1520511680.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:20.478Z,1520511680.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:20.499Z,1520511680.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:20.878Z,1520511680.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:20.893Z,1520511680.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:21.267Z,1520511681.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:21.282Z,1520511681.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:21.674Z,1520511681.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:21.689Z,1520511681.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:22.077Z,1520511682.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:22.091Z,1520511682.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:22.464Z,1520511682.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:22.492Z,1520511682.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:22.871Z,1520511682.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:22.887Z,1520511682.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:23.284Z,1520511683.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:23.302Z,1520511683.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:23.673Z,1520511683.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:23.704Z,1520511683.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:24.082Z,1520511684.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:24.097Z,1520511684.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:24.461Z,1520511684.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:24.494Z,1520511684.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:24.862Z,1520511684.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:24.889Z,1520511684.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:25.261Z,1520511685.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:25.289Z,1520511685.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:25.659Z,1520511685.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:25.686Z,1520511685.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:26.081Z,1520511686.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:26.096Z,1520511686.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:26.484Z,1520511686.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:26.500Z,1520511686.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:26.881Z,1520511686.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:26.896Z,1520511686.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:27.259Z,1520511687.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:27.294Z,1520511687.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:27.661Z,1520511687.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:27.694Z,1520511687.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:28.079Z,1520511688.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:28.099Z,1520511688.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:28.458Z,1520511688.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:28.492Z,1520511688.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:28.864Z,1520511688.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:28.891Z,1520511688.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:29.282Z,1520511689.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:29.297Z,1520511689.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:29.673Z,1520511689.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:29.695Z,1520511689.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:30.073Z,1520511690.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:30.105Z,1520511690.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:30.461Z,1520511690.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:30.487Z,1520511690.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:30.863Z,1520511690.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:30.889Z,1520511690.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:31.267Z,1520511691.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:31.293Z,1520511691.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:31.661Z,1520511691.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:31.691Z,1520511691.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:32.067Z,1520511692.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:32.103Z,1520511692.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:32.485Z,1520511692.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:32.501Z,1520511692.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:32.886Z,1520511692.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:32.901Z,1520511692.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:33.261Z,1520511693.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:33.295Z,1520511693.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:33.661Z,1520511693.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:33.687Z,1520511693.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:34.061Z,1520511694.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:34.089Z,1520511694.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:34.461Z,1520511694.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:34.488Z,1520511694.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:34.866Z,1520511694.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:34.892Z,1520511694.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:35.271Z,1520511695.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:35.307Z,1520511695.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:35.686Z,1520511695.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:35.701Z,1520511695.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:36.082Z,1520511696.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:36.097Z,1520511696.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:36.503Z,1520511696.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:36.901Z,1520511696.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:37.301Z,1520511697.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:37.703Z,1520511697.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:38.103Z,1520511698.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:38.503Z,1520511698.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:38.900Z,1520511698.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:39.281Z,1520511699.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:39.679Z,1520511699.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:40.066Z,1520511700.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:40.082Z,1520511700.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:40.470Z,1520511700.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:40.485Z,1520511700.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:40.868Z,1520511700.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:40.883Z,1520511700.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:41.283Z,1520511701.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:41.318Z,1520511701.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:41.674Z,1520511701.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:41.689Z,1520511701.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:42.082Z,1520511702.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:42.116Z,1520511702.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:42.467Z,1520511702.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:42.483Z,1520511702.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:42.867Z,1520511702.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:42.883Z,1520511702.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:43.274Z,1520511703.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:43.299Z,1520511703.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:43.672Z,1520511703.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:43.687Z,1520511703.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:44.077Z,1520511704.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:44.093Z,1520511704.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:44.479Z,1520511704.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:44.495Z,1520511704.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:44.878Z,1520511704.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:44.894Z,1520511704.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:45.271Z,1520511705.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:45.287Z,1520511705.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:45.670Z,1520511705.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:45.690Z,1520511705.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:46.077Z,1520511706.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:46.092Z,1520511706.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:46.462Z,1520511706.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:46.483Z,1520511706.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:46.496Z,1520511706.496 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T12:21:46.864Z,1520511706.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:46.888Z,1520511706.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:47.282Z,1520511707.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:47.297Z,1520511707.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:47.679Z,1520511707.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:47.695Z,1520511707.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:48.079Z,1520511708.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:48.094Z,1520511708.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:48.458Z,1520511708.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:48.484Z,1520511708.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:48.870Z,1520511708.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:48.890Z,1520511708.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:49.269Z,1520511709.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:49.291Z,1520511709.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:49.657Z,1520511709.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:49.691Z,1520511709.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:50.083Z,1520511710.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:50.100Z,1520511710.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:50.483Z,1520511710.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:50.503Z,1520511710.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:50.885Z,1520511710.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:50.900Z,1520511710.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:51.272Z,1520511711.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:51.288Z,1520511711.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:51.669Z,1520511711.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:51.686Z,1520511711.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:52.058Z,1520511712.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:52.084Z,1520511712.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:52.475Z,1520511712.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:52.490Z,1520511712.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:52.869Z,1520511712.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:52.890Z,1520511712.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:53.277Z,1520511713.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:53.292Z,1520511713.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:53.684Z,1520511713.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:53.699Z,1520511713.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:54.084Z,1520511714.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:54.099Z,1520511714.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:54.474Z,1520511714.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:54.488Z,1520511714.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:54.871Z,1520511714.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:54.890Z,1520511714.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:55.269Z,1520511715.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:55.285Z,1520511715.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:55.661Z,1520511715.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:55.698Z,1520511715.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:56.078Z,1520511716.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:56.093Z,1520511716.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:56.481Z,1520511716.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:56.496Z,1520511716.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:56.875Z,1520511716.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:56.900Z,1520511716.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:57.254Z,1520511717.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:57.293Z,1520511717.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:57.669Z,1520511717.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:57.694Z,1520511717.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:58.072Z,1520511718.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:58.087Z,1520511718.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:58.471Z,1520511718.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:58.487Z,1520511718.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:58.858Z,1520511718.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:58.897Z,1520511718.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:59.281Z,1520511719.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:59.296Z,1520511719.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:21:59.683Z,1520511719.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:21:59.700Z,1520511719.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:00.084Z,1520511720.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:00.103Z,1520511720.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:00.475Z,1520511720.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:00.489Z,1520511720.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:00.873Z,1520511720.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:00.889Z,1520511720.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:01.269Z,1520511721.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:01.285Z,1520511721.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:01.658Z,1520511721.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:01.692Z,1520511721.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:02.084Z,1520511722.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:02.099Z,1520511722.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:02.481Z,1520511722.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:02.496Z,1520511722.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:02.876Z,1520511722.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:02.899Z,1520511722.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:03.264Z,1520511723.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:03.290Z,1520511723.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:03.659Z,1520511723.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:03.699Z,1520511723.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:04.074Z,1520511724.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:04.089Z,1520511724.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:04.464Z,1520511724.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:04.490Z,1520511724.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:04.862Z,1520511724.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:04.888Z,1520511724.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:05.271Z,1520511725.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:05.295Z,1520511725.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:05.682Z,1520511725.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:05.697Z,1520511725.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:06.081Z,1520511726.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:06.096Z,1520511726.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:06.458Z,1520511726.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:06.490Z,1520511726.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:06.864Z,1520511726.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:06.891Z,1520511726.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:07.262Z,1520511727.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:07.290Z,1520511727.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:07.662Z,1520511727.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:07.695Z,1520511727.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:08.081Z,1520511728.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:08.097Z,1520511728.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:08.483Z,1520511728.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:08.503Z,1520511728.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:08.882Z,1520511728.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:08.902Z,1520511728.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:09.263Z,1520511729.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:09.303Z,1520511729.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:09.662Z,1520511729.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:09.694Z,1520511729.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:10.055Z,1520511730.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:10.095Z,1520511730.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:10.466Z,1520511730.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:10.510Z,1520511730.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:10.862Z,1520511730.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:10.894Z,1520511730.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:11.282Z,1520511731.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:11.298Z,1520511731.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:11.683Z,1520511731.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:11.699Z,1520511731.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:12.090Z,1520511732.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:12.110Z,1520511732.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:12.465Z,1520511732.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:12.491Z,1520511732.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:15.560Z,1520511735.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:15.594Z,1520511735.594 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:15.595Z,1520511735.595 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93
2018-03-08T12:22:15.595Z,1520511735.595 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T12:22:15.597Z,1520511735.597 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:15.597Z,1520511735.597 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93
2018-03-08T12:22:15.597Z,1520511735.597 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T12:22:15.599Z,1520511735.599 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:15.599Z,1520511735.599 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 93
2018-03-08T12:22:15.599Z,1520511735.599 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T12:22:15.611Z,1520511735.611 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T12:22:15.611Z,1520511735.611 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T12:22:15.612Z,1520511735.612 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T12:22:15.686Z,1520511735.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:15.737Z,1520511735.737 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T12:22:15.737Z,1520511735.737 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93
2018-03-08T12:22:15.738Z,1520511735.738 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T12:22:15.738Z,1520511735.738 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93
2018-03-08T12:22:15.738Z,1520511735.738 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T12:22:15.738Z,1520511735.738 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 93
2018-03-08T12:22:16.096Z,1520511736.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:16.110Z,1520511736.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T12:22:16.111Z,1520511736.111 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:22:16.111Z,1520511736.111 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:22:16.112Z,1520511736.112 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T12:22:16.112Z,1520511736.112 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:22:16.112Z,1520511736.112 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:22:16.113Z,1520511736.113 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T12:22:16.113Z,1520511736.113 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:22:16.113Z,1520511736.113 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:22:16.467Z,1520511736.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:16.483Z,1520511736.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-03-08T12:22:16.484Z,1520511736.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:16.869Z,1520511736.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:16.883Z,1520511736.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-03-08T12:22:16.885Z,1520511736.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:17.261Z,1520511737.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:17.275Z,1520511737.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-03-08T12:22:17.276Z,1520511737.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:17.655Z,1520511737.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:17.674Z,1520511737.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-03-08T12:22:17.675Z,1520511737.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:18.055Z,1520511738.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:18.090Z,1520511738.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-03-08T12:22:18.091Z,1520511738.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:18.467Z,1520511738.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:18.491Z,1520511738.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-03-08T12:22:18.491Z,1520511738.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:18.853Z,1520511738.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:18.881Z,1520511738.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-03-08T12:22:18.882Z,1520511738.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:19.269Z,1520511739.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:19.284Z,1520511739.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-08T12:22:19.285Z,1520511739.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:19.672Z,1520511739.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:19.686Z,1520511739.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-03-08T12:22:19.687Z,1520511739.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:20.060Z,1520511740.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:20.087Z,1520511740.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-03-08T12:22:20.088Z,1520511740.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:20.459Z,1520511740.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:20.482Z,1520511740.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-08T12:22:20.483Z,1520511740.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:20.861Z,1520511740.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:20.876Z,1520511740.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-08T12:22:20.877Z,1520511740.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:21.258Z,1520511741.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:21.278Z,1520511741.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T12:22:21.279Z,1520511741.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:21.648Z,1520511741.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:21.686Z,1520511741.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T12:22:21.687Z,1520511741.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:22.069Z,1520511742.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:22.085Z,1520511742.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-08T12:22:22.086Z,1520511742.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:22.471Z,1520511742.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:22.487Z,1520511742.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-08T12:22:22.488Z,1520511742.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:22.867Z,1520511742.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:22.887Z,1520511742.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-08T12:22:22.888Z,1520511742.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:23.265Z,1520511743.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:23.294Z,1520511743.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-08T12:22:23.295Z,1520511743.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:23.676Z,1520511743.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:23.710Z,1520511743.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-08T12:22:23.711Z,1520511743.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:24.049Z,1520511744.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:24.075Z,1520511744.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-08T12:22:24.076Z,1520511744.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:24.447Z,1520511744.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:24.475Z,1520511744.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-08T12:22:24.476Z,1520511744.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:24.844Z,1520511744.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:24.872Z,1520511744.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-08T12:22:24.877Z,1520511744.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:25.259Z,1520511745.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:25.284Z,1520511745.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-08T12:22:25.285Z,1520511745.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:25.661Z,1520511745.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:25.686Z,1520511745.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T12:22:25.687Z,1520511745.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:26.058Z,1520511746.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:26.088Z,1520511746.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-08T12:22:26.089Z,1520511746.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:26.448Z,1520511746.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:26.483Z,1520511746.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T12:22:26.484Z,1520511746.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:26.852Z,1520511746.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:26.867Z,1520511746.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T12:22:26.868Z,1520511746.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:27.255Z,1520511747.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:27.286Z,1520511747.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T12:22:27.287Z,1520511747.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:27.654Z,1520511747.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:27.694Z,1520511747.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T12:22:27.695Z,1520511747.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:28.067Z,1520511748.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:28.099Z,1520511748.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T12:22:28.100Z,1520511748.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:28.470Z,1520511748.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:28.498Z,1520511748.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-08T12:22:28.499Z,1520511748.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:28.865Z,1520511748.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:28.887Z,1520511748.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-08T12:22:28.887Z,1520511748.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:29.254Z,1520511749.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:29.288Z,1520511749.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-08T12:22:29.289Z,1520511749.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:29.642Z,1520511749.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:29.685Z,1520511749.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-08T12:22:29.686Z,1520511749.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:30.058Z,1520511750.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:30.094Z,1520511750.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-08T12:22:30.095Z,1520511750.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:30.456Z,1520511750.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:30.470Z,1520511750.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T12:22:30.471Z,1520511750.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:30.851Z,1520511750.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:30.897Z,1520511750.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-08T12:22:30.898Z,1520511750.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:31.270Z,1520511751.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:31.314Z,1520511751.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T12:22:31.315Z,1520511751.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:31.669Z,1520511751.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:31.694Z,1520511751.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T12:22:31.695Z,1520511751.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:32.087Z,1520511752.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:32.102Z,1520511752.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T12:22:32.103Z,1520511752.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:32.459Z,1520511752.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:32.499Z,1520511752.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T12:22:32.500Z,1520511752.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:32.854Z,1520511752.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:32.914Z,1520511752.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-08T12:22:32.915Z,1520511752.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:33.260Z,1520511753.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:33.276Z,1520511753.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T12:22:33.277Z,1520511753.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:33.656Z,1520511753.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:33.671Z,1520511753.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-08T12:22:33.672Z,1520511753.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:34.058Z,1520511754.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:34.076Z,1520511754.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-08T12:22:34.077Z,1520511754.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:34.470Z,1520511754.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:34.501Z,1520511754.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T12:22:34.502Z,1520511754.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:34.859Z,1520511754.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:34.878Z,1520511754.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T12:22:34.879Z,1520511754.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:35.257Z,1520511755.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:35.271Z,1520511755.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T12:22:35.272Z,1520511755.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:35.647Z,1520511755.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:35.686Z,1520511755.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:36.058Z,1520511756.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:36.095Z,1520511756.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:36.460Z,1520511756.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:36.496Z,1520511756.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:36.858Z,1520511756.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:36.881Z,1520511756.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:37.268Z,1520511757.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:37.296Z,1520511757.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:37.673Z,1520511757.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:37.697Z,1520511757.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:38.056Z,1520511758.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:38.072Z,1520511758.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:38.454Z,1520511758.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:38.474Z,1520511758.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:38.851Z,1520511758.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:38.879Z,1520511758.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:39.326Z,1520511759.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:39.370Z,1520511759.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:39.654Z,1520511759.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:39.669Z,1520511759.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:40.069Z,1520511760.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:40.100Z,1520511760.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:40.468Z,1520511760.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:40.499Z,1520511760.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:40.861Z,1520511760.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:40.877Z,1520511760.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:41.259Z,1520511761.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:41.274Z,1520511761.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:41.644Z,1520511761.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:41.672Z,1520511761.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:42.059Z,1520511762.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:42.078Z,1520511762.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:42.464Z,1520511762.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:42.478Z,1520511762.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:42.862Z,1520511762.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:42.879Z,1520511762.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:43.263Z,1520511763.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:43.283Z,1520511763.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:43.667Z,1520511763.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:43.682Z,1520511763.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:44.064Z,1520511764.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:44.088Z,1520511764.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:44.462Z,1520511764.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:44.482Z,1520511764.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:44.861Z,1520511764.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:44.875Z,1520511764.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:45.261Z,1520511765.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:45.279Z,1520511765.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:45.655Z,1520511765.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:45.685Z,1520511765.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:46.067Z,1520511766.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:46.082Z,1520511766.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:46.465Z,1520511766.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:46.480Z,1520511766.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:46.866Z,1520511766.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:46.887Z,1520511766.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:47.263Z,1520511767.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:47.278Z,1520511767.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:47.655Z,1520511767.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:47.675Z,1520511767.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:48.060Z,1520511768.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:48.075Z,1520511768.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:48.461Z,1520511768.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:48.479Z,1520511768.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:48.862Z,1520511768.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:48.877Z,1520511768.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:49.267Z,1520511769.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:49.287Z,1520511769.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:49.664Z,1520511769.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:49.678Z,1520511769.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:50.067Z,1520511770.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:50.086Z,1520511770.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:50.464Z,1520511770.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:50.479Z,1520511770.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:50.864Z,1520511770.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:50.878Z,1520511770.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:51.262Z,1520511771.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:51.277Z,1520511771.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:51.654Z,1520511771.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:51.690Z,1520511771.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:52.068Z,1520511772.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:52.109Z,1520511772.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:52.462Z,1520511772.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:52.482Z,1520511772.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:52.868Z,1520511772.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:52.884Z,1520511772.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:53.260Z,1520511773.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:53.278Z,1520511773.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:53.644Z,1520511773.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:53.677Z,1520511773.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:54.057Z,1520511774.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:54.072Z,1520511774.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:54.459Z,1520511774.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:54.474Z,1520511774.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:54.861Z,1520511774.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:54.879Z,1520511774.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:55.268Z,1520511775.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:55.288Z,1520511775.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:55.672Z,1520511775.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:55.687Z,1520511775.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:56.066Z,1520511776.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:56.081Z,1520511776.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:56.447Z,1520511776.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:56.490Z,1520511776.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:56.864Z,1520511776.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:56.891Z,1520511776.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:57.248Z,1520511777.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:57.276Z,1520511777.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:57.653Z,1520511777.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:57.676Z,1520511777.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:58.075Z,1520511778.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:58.090Z,1520511778.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:58.462Z,1520511778.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:58.486Z,1520511778.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:58.867Z,1520511778.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:58.883Z,1520511778.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:59.249Z,1520511779.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:59.276Z,1520511779.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:22:59.644Z,1520511779.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:22:59.678Z,1520511779.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:00.062Z,1520511780.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T12:23:00.093Z,1520511780.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:00.475Z,1520511780.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:00.871Z,1520511780.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:01.298Z,1520511781.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:01.694Z,1520511781.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:02.075Z,1520511782.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:02.472Z,1520511782.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:02.895Z,1520511782.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:03.294Z,1520511783.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:03.672Z,1520511783.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:04.080Z,1520511784.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:04.483Z,1520511784.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:04.883Z,1520511784.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:05.273Z,1520511785.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:05.670Z,1520511785.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:06.075Z,1520511786.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:06.474Z,1520511786.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:06.882Z,1520511786.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:07.280Z,1520511787.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:07.681Z,1520511787.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:08.082Z,1520511788.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:08.472Z,1520511788.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:08.872Z,1520511788.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:09.278Z,1520511789.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:09.678Z,1520511789.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:10.082Z,1520511790.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:10.485Z,1520511790.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:10.882Z,1520511790.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:11.278Z,1520511791.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:11.671Z,1520511791.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:12.075Z,1520511792.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:12.476Z,1520511792.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:12.875Z,1520511792.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:15.994Z,1520511795.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:16.124Z,1520511796.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:16.526Z,1520511796.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:16.889Z,1520511796.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:17.303Z,1520511797.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:17.693Z,1520511797.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:18.095Z,1520511798.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:18.502Z,1520511798.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:18.899Z,1520511798.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:19.285Z,1520511799.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:19.694Z,1520511799.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:20.095Z,1520511800.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:20.496Z,1520511800.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:20.890Z,1520511800.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:21.302Z,1520511801.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:21.695Z,1520511801.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:22.100Z,1520511802.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:22.492Z,1520511802.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:22.889Z,1520511802.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:23.291Z,1520511803.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:23.694Z,1520511803.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:24.095Z,1520511804.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:24.496Z,1520511804.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:24.898Z,1520511804.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:25.295Z,1520511805.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:25.698Z,1520511805.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:26.094Z,1520511806.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:26.491Z,1520511806.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:26.893Z,1520511806.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:27.296Z,1520511807.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:27.694Z,1520511807.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:28.096Z,1520511808.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:28.493Z,1520511808.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:28.891Z,1520511808.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:29.290Z,1520511809.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:29.685Z,1520511809.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:30.106Z,1520511810.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:30.502Z,1520511810.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:30.897Z,1520511810.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:31.290Z,1520511811.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:31.698Z,1520511811.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:32.093Z,1520511812.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:32.490Z,1520511812.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:32.898Z,1520511812.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:33.300Z,1520511813.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:33.697Z,1520511813.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:34.095Z,1520511814.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:34.494Z,1520511814.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:34.896Z,1520511814.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:35.299Z,1520511815.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:35.690Z,1520511815.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:36.096Z,1520511816.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:36.500Z,1520511816.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:36.897Z,1520511816.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:37.290Z,1520511817.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:37.686Z,1520511817.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:38.095Z,1520511818.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:38.494Z,1520511818.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:38.895Z,1520511818.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:39.311Z,1520511819.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:39.706Z,1520511819.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:40.096Z,1520511820.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:40.491Z,1520511820.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:40.887Z,1520511820.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:41.293Z,1520511821.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:41.688Z,1520511821.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:42.101Z,1520511822.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:42.507Z,1520511822.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:42.902Z,1520511822.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:43.293Z,1520511823.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:43.687Z,1520511823.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:44.094Z,1520511824.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:44.490Z,1520511824.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:44.892Z,1520511824.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:45.300Z,1520511825.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:45.707Z,1520511825.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:46.096Z,1520511826.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:46.503Z,1520511826.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:46.891Z,1520511826.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:47.293Z,1520511827.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:47.695Z,1520511827.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:48.110Z,1520511828.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:48.503Z,1520511828.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:48.900Z,1520511828.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:49.290Z,1520511829.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:49.698Z,1520511829.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:50.091Z,1520511830.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:50.494Z,1520511830.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:50.899Z,1520511830.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:51.299Z,1520511831.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:51.697Z,1520511831.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:52.099Z,1520511832.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:52.490Z,1520511832.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:52.898Z,1520511832.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:53.291Z,1520511833.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:53.698Z,1520511833.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:54.101Z,1520511834.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:54.504Z,1520511834.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:54.900Z,1520511834.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:55.293Z,1520511835.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:55.698Z,1520511835.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:56.098Z,1520511836.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:56.493Z,1520511836.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:56.894Z,1520511836.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:57.298Z,1520511837.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:57.700Z,1520511837.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:58.096Z,1520511838.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:58.498Z,1520511838.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:58.892Z,1520511838.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:59.298Z,1520511839.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:23:59.695Z,1520511839.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:00.101Z,1520511840.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:00.499Z,1520511840.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:00.905Z,1520511840.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:01.300Z,1520511841.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:01.674Z,1520511841.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:02.100Z,1520511842.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:02.504Z,1520511842.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:02.900Z,1520511842.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:03.304Z,1520511843.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:03.706Z,1520511843.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:04.102Z,1520511844.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:04.479Z,1520511844.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:04.909Z,1520511844.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:05.281Z,1520511845.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:05.688Z,1520511845.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:06.112Z,1520511846.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:06.492Z,1520511846.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:06.914Z,1520511846.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:07.291Z,1520511847.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:07.690Z,1520511847.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:08.083Z,1520511848.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:08.487Z,1520511848.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:08.892Z,1520511848.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:09.314Z,1520511849.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:09.692Z,1520511849.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:10.091Z,1520511850.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:10.492Z,1520511850.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:10.886Z,1520511850.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:11.288Z,1520511851.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:11.292Z,1520511851.292 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T12:19:10.0Z
2018-03-08T12:24:11.292Z,1520511851.292 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T12:24:11.292Z,1520511851.292 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T12:24:11.694Z,1520511851.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:12.188Z,1520511852.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:12.496Z,1520511852.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:15.602Z,1520511855.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:15.727Z,1520511855.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:16.059Z,1520511856.059 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0108.lzma
2018-03-08T12:24:16.123Z,1520511856.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:16.501Z,1520511856.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:16.854Z,1520511856.854 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0108.lzma.bak
2018-03-08T12:24:16.854Z,1520511856.854 [DataOverHttps](INFO): SBD MOMSN=7985627
2018-03-08T12:24:16.923Z,1520511856.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:17.485Z,1520511857.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:17.699Z,1520511857.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:20.812Z,1520511860.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:20.931Z,1520511860.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:21.335Z,1520511861.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:21.713Z,1520511861.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:22.108Z,1520511862.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:22.518Z,1520511862.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:22.914Z,1520511862.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:26.013Z,1520511866.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:26.154Z,1520511866.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:26.470Z,1520511866.470 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0109.lzma
2018-03-08T12:24:26.546Z,1520511866.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:26.907Z,1520511866.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:27.263Z,1520511867.263 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0109.lzma.bak
2018-03-08T12:24:27.263Z,1520511867.263 [DataOverHttps](INFO): SBD MOMSN=7985629
2018-03-08T12:24:27.397Z,1520511867.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:27.874Z,1520511867.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:27.877Z,1520511867.877 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T12:24:27.877Z,1520511867.877 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T12:24:27.877Z,1520511867.877 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T12:24:28.116Z,1520511868.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:31.219Z,1520511871.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:31.348Z,1520511871.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:31.725Z,1520511871.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:32.126Z,1520511872.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:32.521Z,1520511872.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:32.952Z,1520511872.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:33.354Z,1520511873.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:33.757Z,1520511873.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:34.127Z,1520511874.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:34.525Z,1520511874.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:34.933Z,1520511874.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:35.332Z,1520511875.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:35.733Z,1520511875.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:36.129Z,1520511876.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:36.530Z,1520511876.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:36.931Z,1520511876.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:37.337Z,1520511877.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:37.734Z,1520511877.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:38.129Z,1520511878.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:38.527Z,1520511878.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:38.935Z,1520511878.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:39.336Z,1520511879.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:39.733Z,1520511879.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:40.129Z,1520511880.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:40.527Z,1520511880.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:40.939Z,1520511880.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:41.337Z,1520511881.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:41.739Z,1520511881.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:42.129Z,1520511882.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:42.529Z,1520511882.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:42.932Z,1520511882.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:43.332Z,1520511883.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:43.733Z,1520511883.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:44.129Z,1520511884.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:44.527Z,1520511884.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:44.933Z,1520511884.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:45.336Z,1520511885.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:45.733Z,1520511885.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:46.126Z,1520511886.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:46.522Z,1520511886.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:46.933Z,1520511886.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:47.337Z,1520511887.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:47.739Z,1520511887.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:48.135Z,1520511888.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:48.535Z,1520511888.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:48.932Z,1520511888.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:49.333Z,1520511889.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:49.733Z,1520511889.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:50.131Z,1520511890.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:50.528Z,1520511890.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:50.931Z,1520511890.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:51.336Z,1520511891.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:51.734Z,1520511891.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:52.130Z,1520511892.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:52.529Z,1520511892.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:52.934Z,1520511892.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:53.337Z,1520511893.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:53.732Z,1520511893.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:54.135Z,1520511894.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:54.529Z,1520511894.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:54.933Z,1520511894.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:55.337Z,1520511895.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:55.733Z,1520511895.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:56.130Z,1520511896.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:56.532Z,1520511896.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:56.938Z,1520511896.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:57.365Z,1520511897.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:57.732Z,1520511897.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:58.128Z,1520511898.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:58.524Z,1520511898.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:58.934Z,1520511898.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:59.401Z,1520511899.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:24:59.734Z,1520511899.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:00.125Z,1520511900.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:00.531Z,1520511900.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:00.932Z,1520511900.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:01.331Z,1520511901.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:01.734Z,1520511901.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:02.129Z,1520511902.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:02.525Z,1520511902.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:02.935Z,1520511902.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:03.336Z,1520511903.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:03.731Z,1520511903.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:04.127Z,1520511904.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:04.526Z,1520511904.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:04.935Z,1520511904.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:05.337Z,1520511905.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:05.739Z,1520511905.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:06.123Z,1520511906.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:06.529Z,1520511906.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:06.932Z,1520511906.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:07.339Z,1520511907.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:07.738Z,1520511907.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:08.130Z,1520511908.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:08.531Z,1520511908.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:08.935Z,1520511908.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:09.336Z,1520511909.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:09.736Z,1520511909.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:10.130Z,1520511910.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:10.529Z,1520511910.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:10.939Z,1520511910.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:11.339Z,1520511911.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:11.735Z,1520511911.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:12.124Z,1520511912.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:12.533Z,1520511912.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:12.940Z,1520511912.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:13.332Z,1520511913.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:13.739Z,1520511913.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:14.127Z,1520511914.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:14.524Z,1520511914.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:14.936Z,1520511914.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:15.339Z,1520511915.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:15.736Z,1520511915.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:16.137Z,1520511916.137 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:16.137Z,1520511916.137 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94
2018-03-08T12:25:16.137Z,1520511916.137 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T12:25:16.139Z,1520511916.139 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:16.139Z,1520511916.139 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94
2018-03-08T12:25:16.139Z,1520511916.139 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T12:25:16.141Z,1520511916.141 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:16.141Z,1520511916.141 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 94
2018-03-08T12:25:16.141Z,1520511916.141 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T12:25:16.161Z,1520511916.161 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T12:25:16.161Z,1520511916.161 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T12:25:16.161Z,1520511916.161 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T12:25:16.546Z,1520511916.546 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T12:25:16.546Z,1520511916.546 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94
2018-03-08T12:25:16.547Z,1520511916.547 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T12:25:16.547Z,1520511916.547 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94
2018-03-08T12:25:16.547Z,1520511916.547 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T12:25:16.547Z,1520511916.547 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 94
2018-03-08T12:25:16.936Z,1520511916.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T12:25:16.936Z,1520511916.936 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:25:16.937Z,1520511916.937 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:25:16.937Z,1520511916.937 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T12:25:16.938Z,1520511916.938 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:25:16.938Z,1520511916.938 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:25:16.938Z,1520511916.938 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T12:25:16.939Z,1520511916.939 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:25:16.939Z,1520511916.939 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:25:17.344Z,1520511917.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T12:25:17.349Z,1520511917.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:17.740Z,1520511917.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T12:25:17.741Z,1520511917.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:18.123Z,1520511918.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T12:25:18.129Z,1520511918.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:18.537Z,1520511918.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T12:25:18.538Z,1520511918.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:18.942Z,1520511918.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T12:25:18.943Z,1520511918.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:19.346Z,1520511919.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T12:25:19.347Z,1520511919.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:19.739Z,1520511919.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T12:25:19.740Z,1520511919.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:20.134Z,1520511920.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T12:25:20.135Z,1520511920.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:20.518Z,1520511920.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T12:25:20.519Z,1520511920.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:20.943Z,1520511920.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T12:25:20.944Z,1520511920.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:21.345Z,1520511921.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T12:25:21.346Z,1520511921.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:21.744Z,1520511921.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T12:25:21.749Z,1520511921.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:22.125Z,1520511922.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T12:25:22.126Z,1520511922.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:22.521Z,1520511922.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T12:25:22.522Z,1520511922.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:22.948Z,1520511922.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T12:25:22.949Z,1520511922.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:23.354Z,1520511923.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T12:25:23.355Z,1520511923.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:23.757Z,1520511923.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T12:25:23.758Z,1520511923.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:24.123Z,1520511924.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T12:25:24.123Z,1520511924.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:24.526Z,1520511924.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T12:25:24.527Z,1520511924.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:24.956Z,1520511924.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T12:25:24.957Z,1520511924.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:25.324Z,1520511925.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T12:25:25.325Z,1520511925.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:25.732Z,1520511925.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T12:25:25.734Z,1520511925.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:26.126Z,1520511926.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T12:25:26.127Z,1520511926.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:26.520Z,1520511926.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T12:25:26.525Z,1520511926.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:26.932Z,1520511926.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T12:25:26.934Z,1520511926.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:27.336Z,1520511927.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T12:25:27.337Z,1520511927.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:27.731Z,1520511927.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T12:25:27.732Z,1520511927.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:28.127Z,1520511928.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T12:25:28.128Z,1520511928.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:28.530Z,1520511928.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T12:25:28.531Z,1520511928.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:31.633Z,1520511931.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-03-08T12:25:31.634Z,1520511931.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:31.767Z,1520511931.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T12:25:31.768Z,1520511931.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:32.136Z,1520511932.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T12:25:32.137Z,1520511932.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:32.539Z,1520511932.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T12:25:32.540Z,1520511932.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:32.935Z,1520511932.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T12:25:32.936Z,1520511932.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:33.336Z,1520511933.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T12:25:33.337Z,1520511933.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:33.723Z,1520511933.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T12:25:33.724Z,1520511933.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:34.135Z,1520511934.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T12:25:34.136Z,1520511934.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:34.536Z,1520511934.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T12:25:34.537Z,1520511934.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:34.937Z,1520511934.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T12:25:34.938Z,1520511934.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:35.330Z,1520511935.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T12:25:35.331Z,1520511935.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:35.732Z,1520511935.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T12:25:35.734Z,1520511935.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:36.135Z,1520511936.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T12:25:36.136Z,1520511936.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:36.531Z,1520511936.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:36.940Z,1520511936.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:37.339Z,1520511937.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:37.747Z,1520511937.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:38.136Z,1520511938.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:38.539Z,1520511938.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:38.940Z,1520511938.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:39.341Z,1520511939.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:39.737Z,1520511939.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:40.135Z,1520511940.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:40.534Z,1520511940.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:40.940Z,1520511940.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:41.342Z,1520511941.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:41.740Z,1520511941.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:42.136Z,1520511942.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:42.539Z,1520511942.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:42.940Z,1520511942.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:43.336Z,1520511943.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:43.739Z,1520511943.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:44.135Z,1520511944.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:44.527Z,1520511944.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:44.941Z,1520511944.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:45.345Z,1520511945.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:45.737Z,1520511945.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:46.138Z,1520511946.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:46.531Z,1520511946.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:46.950Z,1520511946.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:47.354Z,1520511947.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:47.750Z,1520511947.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:48.136Z,1520511948.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:48.539Z,1520511948.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:48.947Z,1520511948.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:49.350Z,1520511949.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:49.750Z,1520511949.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:50.145Z,1520511950.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:50.515Z,1520511950.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:50.951Z,1520511950.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:51.347Z,1520511951.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:51.744Z,1520511951.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:52.122Z,1520511952.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:52.520Z,1520511952.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:52.947Z,1520511952.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:53.354Z,1520511953.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:53.753Z,1520511953.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:54.126Z,1520511954.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:54.523Z,1520511954.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:54.954Z,1520511954.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:55.332Z,1520511955.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:55.757Z,1520511955.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:56.127Z,1520511956.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:56.527Z,1520511956.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:56.955Z,1520511956.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:57.357Z,1520511957.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:57.753Z,1520511957.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:58.131Z,1520511958.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:58.535Z,1520511958.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:58.932Z,1520511958.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:59.357Z,1520511959.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:25:59.732Z,1520511959.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:00.131Z,1520511960.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:00.530Z,1520511960.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:00.963Z,1520511960.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:01.343Z,1520511961.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:01.737Z,1520511961.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:02.134Z,1520511962.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:02.530Z,1520511962.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:02.937Z,1520511962.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:03.342Z,1520511963.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:03.735Z,1520511963.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:04.139Z,1520511964.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:04.539Z,1520511964.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:04.937Z,1520511964.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:05.341Z,1520511965.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:05.737Z,1520511965.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:06.132Z,1520511966.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:06.529Z,1520511966.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:06.937Z,1520511966.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:07.341Z,1520511967.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:07.738Z,1520511967.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:08.138Z,1520511968.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:08.539Z,1520511968.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:08.940Z,1520511968.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:09.341Z,1520511969.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:09.747Z,1520511969.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:10.136Z,1520511970.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:10.530Z,1520511970.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:10.940Z,1520511970.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:11.341Z,1520511971.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:11.740Z,1520511971.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:12.135Z,1520511972.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:12.535Z,1520511972.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:12.942Z,1520511972.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:13.340Z,1520511973.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:13.741Z,1520511973.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:14.136Z,1520511974.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:14.539Z,1520511974.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:14.942Z,1520511974.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:15.341Z,1520511975.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:15.741Z,1520511975.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:16.134Z,1520511976.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:16.534Z,1520511976.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:16.947Z,1520511976.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:17.342Z,1520511977.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:17.742Z,1520511977.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:18.132Z,1520511978.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:18.542Z,1520511978.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:18.945Z,1520511978.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:19.341Z,1520511979.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:19.742Z,1520511979.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:20.130Z,1520511980.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:20.530Z,1520511980.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:20.940Z,1520511980.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:21.343Z,1520511981.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:21.744Z,1520511981.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:22.134Z,1520511982.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:22.535Z,1520511982.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:22.944Z,1520511982.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:23.343Z,1520511983.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:23.741Z,1520511983.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:24.131Z,1520511984.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:24.532Z,1520511984.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:24.941Z,1520511984.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:25.344Z,1520511985.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:25.751Z,1520511985.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:26.135Z,1520511986.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:26.539Z,1520511986.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:26.946Z,1520511986.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:27.344Z,1520511987.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:27.744Z,1520511987.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:28.135Z,1520511988.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:28.539Z,1520511988.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:31.671Z,1520511991.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:31.822Z,1520511991.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:32.173Z,1520511992.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:32.542Z,1520511992.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:32.947Z,1520511992.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:33.341Z,1520511993.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:33.742Z,1520511993.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:34.150Z,1520511994.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:34.573Z,1520511994.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:34.948Z,1520511994.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:35.340Z,1520511995.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:35.741Z,1520511995.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:36.144Z,1520511996.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:36.539Z,1520511996.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:36.949Z,1520511996.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:37.354Z,1520511997.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:37.747Z,1520511997.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:38.145Z,1520511998.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:38.546Z,1520511998.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:38.956Z,1520511998.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:39.355Z,1520511999.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:39.758Z,1520511999.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:40.141Z,1520512000.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:40.553Z,1520512000.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:40.958Z,1520512000.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:41.358Z,1520512001.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:41.766Z,1520512001.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:42.148Z,1520512002.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:42.544Z,1520512002.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:42.958Z,1520512002.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:43.360Z,1520512003.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:43.763Z,1520512003.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:44.154Z,1520512004.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:44.539Z,1520512004.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:44.963Z,1520512004.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:45.365Z,1520512005.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:45.770Z,1520512005.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:46.139Z,1520512006.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:46.542Z,1520512006.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:46.969Z,1520512006.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:47.370Z,1520512007.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:47.383Z,1520512007.383 [CBIT](INFO): Clearing failed state for component DropWeight
2018-03-08T12:26:47.383Z,1520512007.383 [DropWeight] No Fault, FailCount= 1
2018-03-08T12:26:47.768Z,1520512007.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:48.148Z,1520512008.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:48.547Z,1520512008.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:48.970Z,1520512008.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:49.371Z,1520512009.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:49.770Z,1520512009.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:50.147Z,1520512010.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:50.545Z,1520512010.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:50.968Z,1520512010.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:51.367Z,1520512011.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:51.772Z,1520512011.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:52.143Z,1520512012.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:52.544Z,1520512012.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:52.971Z,1520512012.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:53.370Z,1520512013.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:53.769Z,1520512013.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:54.147Z,1520512014.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:54.545Z,1520512014.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:54.970Z,1520512014.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:55.350Z,1520512015.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:55.747Z,1520512015.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:56.145Z,1520512016.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:56.544Z,1520512016.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:56.969Z,1520512016.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:57.371Z,1520512017.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:57.747Z,1520512017.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:58.145Z,1520512018.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:58.551Z,1520512018.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:58.949Z,1520512018.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:59.359Z,1520512019.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:26:59.759Z,1520512019.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:00.149Z,1520512020.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:00.539Z,1520512020.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:00.958Z,1520512020.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:01.351Z,1520512021.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:01.758Z,1520512021.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:02.148Z,1520512022.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:02.543Z,1520512022.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:02.959Z,1520512022.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:03.358Z,1520512023.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:03.752Z,1520512023.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:04.154Z,1520512024.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:04.542Z,1520512024.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:04.958Z,1520512024.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:05.355Z,1520512025.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:05.759Z,1520512025.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:06.147Z,1520512026.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:06.547Z,1520512026.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:06.958Z,1520512026.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:07.352Z,1520512027.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:07.758Z,1520512027.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:08.147Z,1520512028.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:08.538Z,1520512028.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:08.948Z,1520512028.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:09.351Z,1520512029.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:09.753Z,1520512029.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:10.154Z,1520512030.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:10.554Z,1520512030.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:10.956Z,1520512030.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:11.355Z,1520512031.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:11.758Z,1520512031.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:12.147Z,1520512032.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:12.554Z,1520512032.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:12.958Z,1520512032.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:13.356Z,1520512033.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:13.763Z,1520512033.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:14.147Z,1520512034.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:14.544Z,1520512034.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:14.957Z,1520512034.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:15.356Z,1520512035.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:15.762Z,1520512035.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:16.154Z,1520512036.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:16.547Z,1520512036.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:16.953Z,1520512036.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:17.356Z,1520512037.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:17.756Z,1520512037.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:18.147Z,1520512038.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:18.547Z,1520512038.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:18.958Z,1520512038.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:19.356Z,1520512039.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:19.757Z,1520512039.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:20.143Z,1520512040.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:20.549Z,1520512040.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:20.956Z,1520512040.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:21.362Z,1520512041.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:21.762Z,1520512041.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:22.148Z,1520512042.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:22.546Z,1520512042.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:22.956Z,1520512042.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:23.362Z,1520512043.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:23.802Z,1520512043.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:24.186Z,1520512044.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:24.547Z,1520512044.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:24.958Z,1520512044.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:25.356Z,1520512045.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:25.762Z,1520512045.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:26.154Z,1520512046.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:26.547Z,1520512046.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:26.962Z,1520512046.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:27.360Z,1520512047.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:27.757Z,1520512047.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:28.158Z,1520512048.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:28.547Z,1520512048.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:31.646Z,1520512051.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:31.768Z,1520512051.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:32.139Z,1520512052.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:32.545Z,1520512052.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:32.943Z,1520512052.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:33.316Z,1520512053.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:33.722Z,1520512053.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:34.141Z,1520512054.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:34.528Z,1520512054.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:34.953Z,1520512054.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:35.315Z,1520512055.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:35.717Z,1520512055.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:36.118Z,1520512056.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:36.519Z,1520512056.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:36.920Z,1520512056.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:37.323Z,1520512057.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:37.720Z,1520512057.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:38.119Z,1520512058.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:38.518Z,1520512058.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:38.921Z,1520512058.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:39.332Z,1520512059.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:39.730Z,1520512059.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:40.111Z,1520512060.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:40.519Z,1520512060.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:40.918Z,1520512060.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:41.327Z,1520512061.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:41.728Z,1520512061.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:42.130Z,1520512062.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:42.513Z,1520512062.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:42.926Z,1520512062.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:43.323Z,1520512063.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:43.717Z,1520512063.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:44.123Z,1520512064.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:44.527Z,1520512064.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:44.924Z,1520512064.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:45.321Z,1520512065.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:45.719Z,1520512065.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:46.114Z,1520512066.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:46.522Z,1520512066.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:46.918Z,1520512066.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:47.328Z,1520512067.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:47.728Z,1520512067.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:48.128Z,1520512068.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:48.516Z,1520512068.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:48.922Z,1520512068.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:49.322Z,1520512069.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:49.716Z,1520512069.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:50.127Z,1520512070.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:50.527Z,1520512070.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:50.935Z,1520512070.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:51.321Z,1520512071.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:51.718Z,1520512071.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:52.116Z,1520512072.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:52.522Z,1520512072.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:52.919Z,1520512072.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:53.328Z,1520512073.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:53.728Z,1520512073.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:54.127Z,1520512074.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:54.516Z,1520512074.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:54.918Z,1520512074.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:55.326Z,1520512075.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:55.717Z,1520512075.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:56.127Z,1520512076.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:56.527Z,1520512076.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:56.927Z,1520512076.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:57.321Z,1520512077.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:57.718Z,1520512077.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:58.117Z,1520512078.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:58.521Z,1520512078.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:58.919Z,1520512078.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:59.328Z,1520512079.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:27:59.733Z,1520512079.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:00.128Z,1520512080.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:00.518Z,1520512080.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:00.919Z,1520512080.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:01.320Z,1520512081.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:01.723Z,1520512081.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:02.127Z,1520512082.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:02.610Z,1520512082.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:02.927Z,1520512082.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:03.322Z,1520512083.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:03.726Z,1520512083.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:04.123Z,1520512084.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:04.527Z,1520512084.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:04.922Z,1520512084.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:05.430Z,1520512085.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:05.728Z,1520512085.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:06.128Z,1520512086.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:06.520Z,1520512086.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:06.927Z,1520512086.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:07.324Z,1520512087.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:07.716Z,1520512087.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:08.128Z,1520512088.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:08.526Z,1520512088.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:08.928Z,1520512088.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:09.319Z,1520512089.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:09.719Z,1520512089.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:10.126Z,1520512090.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:10.519Z,1520512090.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:10.918Z,1520512090.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:11.324Z,1520512091.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:11.729Z,1520512091.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:12.129Z,1520512092.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:12.526Z,1520512092.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:12.922Z,1520512092.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:13.323Z,1520512093.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:13.716Z,1520512093.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:14.134Z,1520512094.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:14.531Z,1520512094.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:14.932Z,1520512094.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:15.326Z,1520512095.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:15.722Z,1520512095.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:16.125Z,1520512096.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:16.526Z,1520512096.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:16.919Z,1520512096.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:17.276Z,1520512097.276 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T12:28:17.276Z,1520512097.276 [NAL9602] Data Fault, FailCount= 2
2018-03-08T12:28:17.276Z,1520512097.276 [NAL9602](ERROR): Data Fault
2018-03-08T12:28:17.328Z,1520512097.328 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:17.333Z,1520512097.333 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95
2018-03-08T12:28:17.333Z,1520512097.333 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T12:28:17.335Z,1520512097.335 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:17.335Z,1520512097.335 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95
2018-03-08T12:28:17.335Z,1520512097.335 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T12:28:17.341Z,1520512097.341 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:17.341Z,1520512097.341 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 95
2018-03-08T12:28:17.341Z,1520512097.341 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T12:28:17.366Z,1520512097.366 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T12:28:17.366Z,1520512097.366 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T12:28:17.366Z,1520512097.366 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T12:28:17.366Z,1520512097.366 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T12:28:17.690Z,1520512097.690 [NAL9602](INFO): Powering down
2018-03-08T12:28:17.747Z,1520512097.747 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T12:28:17.747Z,1520512097.747 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95
2018-03-08T12:28:17.747Z,1520512097.747 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T12:28:17.747Z,1520512097.747 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95
2018-03-08T12:28:17.748Z,1520512097.748 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T12:28:17.748Z,1520512097.748 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 95
2018-03-08T12:28:18.125Z,1520512098.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T12:28:18.125Z,1520512098.125 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:28:18.125Z,1520512098.125 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:28:18.126Z,1520512098.126 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T12:28:18.126Z,1520512098.126 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:28:18.126Z,1520512098.126 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:28:18.127Z,1520512098.127 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T12:28:18.127Z,1520512098.127 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:28:18.127Z,1520512098.127 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:28:18.514Z,1520512098.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T12:28:18.515Z,1520512098.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:18.541Z,1520512098.541 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T12:28:18.541Z,1520512098.541 [NAL9602] No Fault, FailCount= 2
2018-03-08T12:28:18.930Z,1520512098.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T12:28:18.931Z,1520512098.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:19.329Z,1520512099.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T12:28:19.330Z,1520512099.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:19.707Z,1520512099.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T12:28:19.708Z,1520512099.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:20.112Z,1520512100.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T12:28:20.138Z,1520512100.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:20.512Z,1520512100.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T12:28:20.539Z,1520512100.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:20.930Z,1520512100.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T12:28:20.931Z,1520512100.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:21.316Z,1520512101.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T12:28:21.342Z,1520512101.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:21.713Z,1520512101.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T12:28:21.714Z,1520512101.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:22.106Z,1520512102.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T12:28:22.107Z,1520512102.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:22.516Z,1520512102.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T12:28:22.539Z,1520512102.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:22.914Z,1520512102.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T12:28:22.915Z,1520512102.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:23.306Z,1520512103.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T12:28:23.307Z,1520512103.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:23.717Z,1520512103.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T12:28:23.718Z,1520512103.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:24.112Z,1520512104.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T12:28:24.113Z,1520512104.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:24.510Z,1520512104.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T12:28:24.511Z,1520512104.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:24.912Z,1520512104.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T12:28:24.913Z,1520512104.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:25.312Z,1520512105.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T12:28:25.313Z,1520512105.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:25.706Z,1520512105.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T12:28:25.707Z,1520512105.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:26.116Z,1520512106.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T12:28:26.117Z,1520512106.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:26.513Z,1520512106.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T12:28:26.514Z,1520512106.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:26.917Z,1520512106.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T12:28:26.918Z,1520512106.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:27.316Z,1520512107.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T12:28:27.317Z,1520512107.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:27.713Z,1520512107.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T12:28:27.714Z,1520512107.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:28.109Z,1520512108.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T12:28:28.110Z,1520512108.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:28.517Z,1520512108.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T12:28:28.518Z,1520512108.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:28.922Z,1520512108.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T12:28:28.923Z,1520512108.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:32.021Z,1520512112.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-03-08T12:28:32.022Z,1520512112.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:32.154Z,1520512112.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T12:28:32.155Z,1520512112.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:32.549Z,1520512112.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T12:28:32.550Z,1520512112.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:32.921Z,1520512112.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T12:28:32.922Z,1520512112.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:33.325Z,1520512113.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T12:28:33.326Z,1520512113.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:33.722Z,1520512113.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T12:28:33.723Z,1520512113.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:34.118Z,1520512114.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T12:28:34.119Z,1520512114.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:34.528Z,1520512114.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T12:28:34.552Z,1520512114.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:34.951Z,1520512114.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T12:28:34.952Z,1520512114.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:35.317Z,1520512115.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T12:28:35.318Z,1520512115.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:35.721Z,1520512115.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T12:28:35.722Z,1520512115.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:36.150Z,1520512116.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T12:28:36.151Z,1520512116.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:36.518Z,1520512116.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T12:28:36.519Z,1520512116.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:36.920Z,1520512116.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T12:28:36.921Z,1520512116.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:37.331Z,1520512117.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:37.722Z,1520512117.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:38.126Z,1520512118.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:38.526Z,1520512118.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:38.927Z,1520512118.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:39.324Z,1520512119.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:39.727Z,1520512119.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:40.126Z,1520512120.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:40.526Z,1520512120.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:40.928Z,1520512120.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:41.326Z,1520512121.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:41.726Z,1520512121.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:42.127Z,1520512122.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:42.525Z,1520512122.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:42.926Z,1520512122.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:43.327Z,1520512123.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:43.726Z,1520512123.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:44.126Z,1520512124.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:44.527Z,1520512124.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:44.927Z,1520512124.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:45.326Z,1520512125.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:45.732Z,1520512125.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:46.126Z,1520512126.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:46.525Z,1520512126.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:46.928Z,1520512126.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:47.325Z,1520512127.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:47.697Z,1520512127.697 [NAL9602](INFO): Powering up NAL9602
2018-03-08T12:28:47.728Z,1520512127.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:48.127Z,1520512128.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:48.525Z,1520512128.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:48.924Z,1520512128.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:49.322Z,1520512129.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:49.726Z,1520512129.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:50.126Z,1520512130.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:50.525Z,1520512130.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:50.927Z,1520512130.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:51.325Z,1520512131.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:51.726Z,1520512131.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:52.124Z,1520512132.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:52.526Z,1520512132.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:52.925Z,1520512132.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:53.325Z,1520512133.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:53.730Z,1520512133.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:54.122Z,1520512134.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:54.527Z,1520512134.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:54.924Z,1520512134.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:55.321Z,1520512135.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:55.725Z,1520512135.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:56.124Z,1520512136.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:56.525Z,1520512136.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:56.925Z,1520512136.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:57.326Z,1520512137.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:57.718Z,1520512137.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:58.124Z,1520512138.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:58.527Z,1520512138.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:58.895Z,1520512138.895 [NAL9602](INFO): NAL9602 initialized
2018-03-08T12:28:58.935Z,1520512138.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:59.326Z,1520512139.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:28:59.732Z,1520512139.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:00.132Z,1520512140.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:00.532Z,1520512140.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:00.962Z,1520512140.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:01.337Z,1520512141.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:01.745Z,1520512141.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:02.135Z,1520512142.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:02.535Z,1520512142.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:02.941Z,1520512142.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:03.350Z,1520512143.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:03.725Z,1520512143.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:04.130Z,1520512144.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:04.542Z,1520512144.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:04.951Z,1520512144.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:05.341Z,1520512145.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:05.738Z,1520512145.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:06.138Z,1520512146.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:06.540Z,1520512146.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:06.946Z,1520512146.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:07.343Z,1520512147.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:07.730Z,1520512147.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:08.145Z,1520512148.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:08.544Z,1520512148.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:08.943Z,1520512148.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:09.346Z,1520512149.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:09.727Z,1520512149.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:10.130Z,1520512150.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:10.540Z,1520512150.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:10.929Z,1520512150.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:11.340Z,1520512151.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:11.730Z,1520512151.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:12.123Z,1520512152.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:12.539Z,1520512152.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:12.939Z,1520512152.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:13.335Z,1520512153.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:13.731Z,1520512153.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:14.126Z,1520512154.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:14.531Z,1520512154.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:14.939Z,1520512154.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:15.340Z,1520512155.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:15.728Z,1520512155.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:16.130Z,1520512156.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:16.541Z,1520512156.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:16.946Z,1520512156.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:17.346Z,1520512157.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:17.730Z,1520512157.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:18.136Z,1520512158.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:18.541Z,1520512158.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:18.951Z,1520512158.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:19.337Z,1520512159.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:19.729Z,1520512159.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:20.131Z,1520512160.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:20.539Z,1520512160.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:20.941Z,1520512160.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:21.342Z,1520512161.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:21.739Z,1520512161.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:22.134Z,1520512162.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:22.551Z,1520512162.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:22.944Z,1520512162.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:23.341Z,1520512163.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:23.737Z,1520512163.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:24.134Z,1520512164.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:24.538Z,1520512164.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:24.947Z,1520512164.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:25.341Z,1520512165.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:25.739Z,1520512165.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:26.138Z,1520512166.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:26.545Z,1520512166.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:26.951Z,1520512166.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:27.346Z,1520512167.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:27.739Z,1520512167.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:28.138Z,1520512168.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:28.141Z,1520512168.141 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T12:29:28.141Z,1520512168.141 [Default:CheckIn:C.Wait] Stopped
2018-03-08T12:29:28.141Z,1520512168.141 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T12:29:28.142Z,1520512168.142 [Default:CheckIn:D] Running Loop=1
2018-03-08T12:29:28.545Z,1520512168.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:28.548Z,1520512168.548 [Default:CheckIn:D] Stopped
2018-03-08T12:29:28.548Z,1520512168.548 [Default:CheckIn:E] Running Loop=1
2018-03-08T12:29:28.947Z,1520512168.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:28.950Z,1520512168.950 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 283.729036 min 
2018-03-08T12:29:28.950Z,1520512168.950 [Default:CheckIn:E] Stopped
2018-03-08T12:29:28.950Z,1520512168.950 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T12:29:28.951Z,1520512168.951 [Default:CheckIn] Stopped
2018-03-08T12:29:28.951Z,1520512168.951 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T12:29:28.951Z,1520512168.951 [Default:CheckIn](INFO): Running loop #28
2018-03-08T12:29:28.951Z,1520512168.951 [Default:CheckIn] Running Loop=28
2018-03-08T12:29:28.951Z,1520512168.951 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T12:29:28.951Z,1520512168.951 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T12:29:32.057Z,1520512172.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:32.191Z,1520512172.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:32.555Z,1520512172.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:32.956Z,1520512172.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:33.358Z,1520512173.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:33.759Z,1520512173.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:34.160Z,1520512174.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:34.566Z,1520512174.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:34.954Z,1520512174.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:35.348Z,1520512175.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:35.753Z,1520512175.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:36.150Z,1520512176.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:36.560Z,1520512176.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:36.966Z,1520512176.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:37.359Z,1520512177.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:37.749Z,1520512177.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:38.159Z,1520512178.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:38.554Z,1520512178.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:38.957Z,1520512178.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:39.355Z,1520512179.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:39.761Z,1520512179.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:40.162Z,1520512180.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:40.563Z,1520512180.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:40.954Z,1520512180.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:41.356Z,1520512181.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:41.754Z,1520512181.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:42.156Z,1520512182.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:42.558Z,1520512182.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:42.966Z,1520512182.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:43.365Z,1520512183.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:43.757Z,1520512183.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:44.152Z,1520512184.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:44.561Z,1520512184.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:44.969Z,1520512184.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:45.365Z,1520512185.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:45.756Z,1520512185.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:46.150Z,1520512186.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:46.574Z,1520512186.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:46.974Z,1520512186.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:47.362Z,1520512187.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:47.752Z,1520512187.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:48.152Z,1520512188.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:48.564Z,1520512188.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:48.965Z,1520512188.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:49.365Z,1520512189.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:49.756Z,1520512189.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:50.152Z,1520512190.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:50.561Z,1520512190.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:50.966Z,1520512190.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:51.364Z,1520512191.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:51.755Z,1520512191.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:52.155Z,1520512192.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:52.564Z,1520512192.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:52.967Z,1520512192.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:53.359Z,1520512193.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:53.753Z,1520512193.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:54.153Z,1520512194.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:54.563Z,1520512194.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:54.968Z,1520512194.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:55.365Z,1520512195.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:55.751Z,1520512195.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:56.153Z,1520512196.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:56.561Z,1520512196.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:56.969Z,1520512196.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:57.365Z,1520512197.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:57.753Z,1520512197.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:58.152Z,1520512198.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:58.565Z,1520512198.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:58.968Z,1520512198.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:59.357Z,1520512199.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:29:59.766Z,1520512199.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:00.156Z,1520512200.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:00.566Z,1520512200.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:00.969Z,1520512200.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:01.370Z,1520512201.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:01.757Z,1520512201.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:02.155Z,1520512202.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:02.561Z,1520512202.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:02.970Z,1520512202.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:03.370Z,1520512203.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:03.755Z,1520512203.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:04.159Z,1520512204.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:04.566Z,1520512204.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:04.965Z,1520512204.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:05.362Z,1520512205.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:05.756Z,1520512205.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:06.149Z,1520512206.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:06.564Z,1520512206.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:06.971Z,1520512206.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:07.365Z,1520512207.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:07.756Z,1520512207.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:08.153Z,1520512208.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:08.566Z,1520512208.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:08.964Z,1520512208.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:09.366Z,1520512209.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:09.755Z,1520512209.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:10.156Z,1520512210.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:10.563Z,1520512210.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:10.983Z,1520512210.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:11.415Z,1520512211.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:11.759Z,1520512211.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:12.141Z,1520512212.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:12.562Z,1520512212.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:12.967Z,1520512212.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:13.367Z,1520512213.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:13.744Z,1520512213.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:14.150Z,1520512214.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:14.550Z,1520512214.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:14.951Z,1520512214.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:15.349Z,1520512215.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:15.756Z,1520512215.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:16.152Z,1520512216.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:16.578Z,1520512216.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:16.956Z,1520512216.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:17.351Z,1520512217.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:17.751Z,1520512217.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:18.150Z,1520512218.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:18.553Z,1520512218.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:18.957Z,1520512218.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:19.385Z,1520512219.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:19.749Z,1520512219.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:20.152Z,1520512220.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:20.548Z,1520512220.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:20.952Z,1520512220.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:21.355Z,1520512221.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:21.752Z,1520512221.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:22.151Z,1520512222.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:22.581Z,1520512222.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:22.948Z,1520512222.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:23.348Z,1520512223.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:23.782Z,1520512223.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:24.149Z,1520512224.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:24.553Z,1520512224.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:24.982Z,1520512224.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:25.383Z,1520512225.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:25.745Z,1520512225.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:26.154Z,1520512226.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:26.552Z,1520512226.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:26.955Z,1520512226.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:27.350Z,1520512227.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:27.755Z,1520512227.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:28.157Z,1520512228.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:28.557Z,1520512228.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:28.951Z,1520512228.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:32.065Z,1520512232.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:32.210Z,1520512232.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:32.592Z,1520512232.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:32.969Z,1520512232.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:33.391Z,1520512233.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:33.761Z,1520512233.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:34.157Z,1520512234.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:34.560Z,1520512234.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:34.964Z,1520512234.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:35.357Z,1520512235.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:35.765Z,1520512235.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:36.168Z,1520512236.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:36.567Z,1520512236.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:36.963Z,1520512236.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:37.364Z,1520512237.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:37.762Z,1520512237.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:38.161Z,1520512238.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:38.579Z,1520512238.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:38.976Z,1520512238.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:39.374Z,1520512239.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:39.765Z,1520512239.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:40.162Z,1520512240.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:40.564Z,1520512240.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:40.964Z,1520512240.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:41.359Z,1520512241.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:41.779Z,1520512241.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:42.177Z,1520512242.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:42.575Z,1520512242.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:42.960Z,1520512242.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:43.361Z,1520512243.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:43.759Z,1520512243.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:44.164Z,1520512244.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:44.573Z,1520512244.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:44.977Z,1520512244.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:45.373Z,1520512245.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:45.767Z,1520512245.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:46.170Z,1520512246.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:46.570Z,1520512246.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:46.967Z,1520512246.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:47.371Z,1520512247.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:47.775Z,1520512247.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:48.183Z,1520512248.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:48.583Z,1520512248.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:48.978Z,1520512248.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:49.355Z,1520512249.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:49.760Z,1520512249.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:50.159Z,1520512250.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:50.573Z,1520512250.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:50.981Z,1520512250.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:51.387Z,1520512251.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:51.759Z,1520512251.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:52.160Z,1520512252.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:52.559Z,1520512252.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:52.959Z,1520512252.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:53.359Z,1520512253.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:53.787Z,1520512253.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:54.165Z,1520512254.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:54.587Z,1520512254.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:54.965Z,1520512254.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:55.360Z,1520512255.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:55.763Z,1520512255.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:56.162Z,1520512256.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:56.564Z,1520512256.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:56.968Z,1520512256.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:57.365Z,1520512257.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:57.760Z,1520512257.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:58.162Z,1520512258.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:58.561Z,1520512258.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:58.968Z,1520512258.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:59.355Z,1520512259.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:30:59.769Z,1520512259.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:00.167Z,1520512260.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:00.574Z,1520512260.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:00.970Z,1520512260.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:01.362Z,1520512261.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:01.764Z,1520512261.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:02.166Z,1520512262.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:02.568Z,1520512262.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:02.969Z,1520512262.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:03.374Z,1520512263.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:03.763Z,1520512263.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:04.164Z,1520512264.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:04.559Z,1520512264.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:04.962Z,1520512264.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:05.363Z,1520512265.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:05.775Z,1520512265.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:06.167Z,1520512266.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:06.573Z,1520512266.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:06.962Z,1520512266.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:07.362Z,1520512267.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:07.764Z,1520512267.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:08.162Z,1520512268.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:08.570Z,1520512268.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:08.972Z,1520512268.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:09.371Z,1520512269.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:09.762Z,1520512269.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:10.164Z,1520512270.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:10.563Z,1520512270.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:10.959Z,1520512270.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:11.364Z,1520512271.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:11.771Z,1520512271.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:12.170Z,1520512272.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:12.573Z,1520512272.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:12.970Z,1520512272.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:13.363Z,1520512273.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:13.767Z,1520512273.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:14.159Z,1520512274.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:14.570Z,1520512274.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:14.978Z,1520512274.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:15.372Z,1520512275.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:15.759Z,1520512275.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:16.170Z,1520512276.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:16.563Z,1520512276.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:16.962Z,1520512276.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:17.370Z,1520512277.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:17.778Z,1520512277.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:18.171Z,1520512278.171 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:18.171Z,1520512278.171 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96
2018-03-08T12:31:18.171Z,1520512278.171 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T12:31:18.173Z,1520512278.173 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:18.173Z,1520512278.173 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96
2018-03-08T12:31:18.173Z,1520512278.173 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T12:31:18.175Z,1520512278.175 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:18.175Z,1520512278.175 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 96
2018-03-08T12:31:18.175Z,1520512278.175 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T12:31:18.224Z,1520512278.224 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T12:31:18.225Z,1520512278.225 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T12:31:18.225Z,1520512278.225 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T12:31:18.586Z,1520512278.586 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T12:31:18.586Z,1520512278.586 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96
2018-03-08T12:31:18.587Z,1520512278.587 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T12:31:18.587Z,1520512278.587 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96
2018-03-08T12:31:18.587Z,1520512278.587 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T12:31:18.587Z,1520512278.587 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 96
2018-03-08T12:31:18.959Z,1520512278.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T12:31:18.960Z,1520512278.960 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:31:18.960Z,1520512278.960 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:31:18.960Z,1520512278.960 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T12:31:18.961Z,1520512278.961 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:31:18.961Z,1520512278.961 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:31:18.962Z,1520512278.962 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T12:31:18.962Z,1520512278.962 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:31:18.962Z,1520512278.962 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:31:19.370Z,1520512279.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T12:31:19.371Z,1520512279.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:19.765Z,1520512279.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T12:31:19.766Z,1520512279.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:20.167Z,1520512280.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T12:31:20.168Z,1520512280.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:20.573Z,1520512280.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T12:31:20.574Z,1520512280.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:20.976Z,1520512280.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T12:31:20.977Z,1520512280.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:21.375Z,1520512281.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T12:31:21.376Z,1520512281.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:21.772Z,1520512281.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T12:31:21.773Z,1520512281.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:22.170Z,1520512282.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T12:31:22.171Z,1520512282.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:22.569Z,1520512282.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T12:31:22.570Z,1520512282.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:22.971Z,1520512282.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T12:31:22.972Z,1520512282.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:23.370Z,1520512283.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T12:31:23.371Z,1520512283.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:23.774Z,1520512283.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T12:31:23.775Z,1520512283.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:24.178Z,1520512284.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T12:31:24.179Z,1520512284.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:24.578Z,1520512284.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T12:31:24.579Z,1520512284.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:24.967Z,1520512284.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T12:31:24.968Z,1520512284.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:25.377Z,1520512285.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T12:31:25.378Z,1520512285.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:25.751Z,1520512285.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T12:31:25.752Z,1520512285.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:26.160Z,1520512286.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T12:31:26.161Z,1520512286.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:26.563Z,1520512286.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T12:31:26.564Z,1520512286.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:26.967Z,1520512286.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T12:31:26.968Z,1520512286.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:27.371Z,1520512287.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T12:31:27.393Z,1520512287.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:27.762Z,1520512287.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T12:31:27.763Z,1520512287.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:28.163Z,1520512288.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T12:31:28.164Z,1520512288.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:28.560Z,1520512288.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T12:31:28.561Z,1520512288.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:28.959Z,1520512288.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T12:31:28.960Z,1520512288.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:32.074Z,1520512292.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2018-03-08T12:31:32.075Z,1520512292.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:32.240Z,1520512292.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-08T12:31:32.241Z,1520512292.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:32.599Z,1520512292.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T12:31:32.600Z,1520512292.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:33.001Z,1520512293.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T12:31:33.002Z,1520512293.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:33.378Z,1520512293.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T12:31:33.379Z,1520512293.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:33.772Z,1520512293.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T12:31:33.773Z,1520512293.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:34.172Z,1520512294.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T12:31:34.173Z,1520512294.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:34.584Z,1520512294.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T12:31:34.605Z,1520512294.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:34.979Z,1520512294.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T12:31:34.980Z,1520512294.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:35.375Z,1520512295.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T12:31:35.376Z,1520512295.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:35.774Z,1520512295.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T12:31:35.775Z,1520512295.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:36.178Z,1520512296.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T12:31:36.179Z,1520512296.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:36.569Z,1520512296.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T12:31:36.570Z,1520512296.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:36.975Z,1520512296.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T12:31:36.976Z,1520512296.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:37.373Z,1520512297.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T12:31:37.374Z,1520512297.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:37.776Z,1520512297.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T12:31:37.777Z,1520512297.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:38.210Z,1520512298.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:38.586Z,1520512298.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:38.982Z,1520512298.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:39.375Z,1520512299.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:39.774Z,1520512299.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:40.174Z,1520512300.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:40.588Z,1520512300.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:40.986Z,1520512300.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:41.386Z,1520512301.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:41.775Z,1520512301.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:42.183Z,1520512302.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:42.574Z,1520512302.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:42.977Z,1520512302.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:43.374Z,1520512303.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:43.785Z,1520512303.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:44.188Z,1520512304.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:44.587Z,1520512304.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:44.983Z,1520512304.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:45.376Z,1520512305.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:45.785Z,1520512305.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:46.172Z,1520512306.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:46.589Z,1520512306.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:46.602Z,1520512306.602 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T12:31:46.987Z,1520512306.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:47.385Z,1520512307.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:47.776Z,1520512307.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:48.178Z,1520512308.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:48.587Z,1520512308.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:48.977Z,1520512308.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:49.376Z,1520512309.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:49.787Z,1520512309.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:50.190Z,1520512310.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:50.594Z,1520512310.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:50.977Z,1520512310.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:51.381Z,1520512311.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:51.777Z,1520512311.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:52.168Z,1520512312.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:52.589Z,1520512312.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:52.989Z,1520512312.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:53.386Z,1520512313.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:53.783Z,1520512313.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:54.189Z,1520512314.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:54.560Z,1520512314.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:54.967Z,1520512314.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:55.372Z,1520512315.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:55.772Z,1520512315.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:56.202Z,1520512316.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:56.594Z,1520512316.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:56.967Z,1520512316.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:57.398Z,1520512317.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:57.774Z,1520512317.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:58.164Z,1520512318.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:58.593Z,1520512318.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:58.998Z,1520512318.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:59.394Z,1520512319.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:31:59.799Z,1520512319.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:00.167Z,1520512320.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:00.569Z,1520512320.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:00.974Z,1520512320.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:01.370Z,1520512321.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:01.773Z,1520512321.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:02.206Z,1520512322.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:02.594Z,1520512322.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:02.970Z,1520512322.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:03.372Z,1520512323.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:03.773Z,1520512323.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:04.168Z,1520512324.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:04.594Z,1520512324.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:04.998Z,1520512324.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:05.394Z,1520512325.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:05.768Z,1520512325.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:06.173Z,1520512326.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:06.571Z,1520512326.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:06.998Z,1520512326.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:07.372Z,1520512327.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:07.788Z,1520512327.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:08.209Z,1520512328.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:08.600Z,1520512328.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:08.968Z,1520512328.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:09.399Z,1520512329.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:09.773Z,1520512329.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:10.174Z,1520512330.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:10.602Z,1520512330.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:10.984Z,1520512330.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:11.373Z,1520512331.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:11.771Z,1520512331.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:12.171Z,1520512332.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:12.569Z,1520512332.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:12.972Z,1520512332.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:13.371Z,1520512333.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:13.776Z,1520512333.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:14.184Z,1520512334.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:14.586Z,1520512334.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:14.973Z,1520512334.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:15.374Z,1520512335.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:15.774Z,1520512335.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:16.173Z,1520512336.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:16.580Z,1520512336.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:16.979Z,1520512336.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:17.376Z,1520512337.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:17.775Z,1520512337.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:18.174Z,1520512338.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:18.573Z,1520512338.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:18.978Z,1520512338.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:19.375Z,1520512339.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:19.776Z,1520512339.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:20.180Z,1520512340.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:20.587Z,1520512340.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:20.974Z,1520512340.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:21.375Z,1520512341.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:21.781Z,1520512341.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:22.173Z,1520512342.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:22.580Z,1520512342.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:22.984Z,1520512342.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:23.380Z,1520512343.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:23.775Z,1520512343.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:24.174Z,1520512344.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:24.606Z,1520512344.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:24.983Z,1520512344.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:25.374Z,1520512345.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:25.781Z,1520512345.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:26.180Z,1520512346.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:26.586Z,1520512346.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:26.973Z,1520512346.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:27.376Z,1520512347.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:27.775Z,1520512347.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:28.175Z,1520512348.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:28.580Z,1520512348.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:28.986Z,1520512348.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:32.078Z,1520512352.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:32.207Z,1520512352.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:32.568Z,1520512352.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:32.963Z,1520512352.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:33.364Z,1520512353.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:33.778Z,1520512353.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:34.177Z,1520512354.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:34.571Z,1520512354.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:34.970Z,1520512354.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:35.355Z,1520512355.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:35.770Z,1520512355.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:36.170Z,1520512356.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:36.574Z,1520512356.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:36.977Z,1520512356.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:37.381Z,1520512357.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:37.770Z,1520512357.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:38.145Z,1520512358.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:38.571Z,1520512358.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:38.954Z,1520512358.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:39.351Z,1520512359.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:39.777Z,1520512359.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:40.182Z,1520512360.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:40.557Z,1520512360.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:40.978Z,1520512360.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:41.358Z,1520512361.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:41.753Z,1520512361.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:42.156Z,1520512362.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:42.587Z,1520512362.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:42.984Z,1520512362.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:43.387Z,1520512363.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:43.759Z,1520512363.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:44.156Z,1520512364.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:44.562Z,1520512364.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:44.957Z,1520512364.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:45.357Z,1520512365.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:45.787Z,1520512365.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:46.167Z,1520512366.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:46.562Z,1520512366.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:46.961Z,1520512366.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:47.364Z,1520512367.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:47.759Z,1520512367.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:48.159Z,1520512368.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:48.574Z,1520512368.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:48.975Z,1520512368.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:49.369Z,1520512369.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:49.760Z,1520512369.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:50.167Z,1520512370.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:50.559Z,1520512370.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:50.960Z,1520512370.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:51.365Z,1520512371.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:51.774Z,1520512371.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:52.168Z,1520512372.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:52.568Z,1520512372.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:52.962Z,1520512372.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:53.366Z,1520512373.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:53.764Z,1520512373.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:54.158Z,1520512374.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:54.570Z,1520512374.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:54.968Z,1520512374.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:55.374Z,1520512375.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:55.766Z,1520512375.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:56.166Z,1520512376.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:56.570Z,1520512376.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:56.964Z,1520512376.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:57.361Z,1520512377.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:57.773Z,1520512377.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:58.217Z,1520512378.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:58.570Z,1520512378.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:58.965Z,1520512378.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:59.371Z,1520512379.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:32:59.765Z,1520512379.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:00.160Z,1520512380.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:00.574Z,1520512380.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:00.976Z,1520512380.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:01.375Z,1520512381.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:01.766Z,1520512381.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:02.164Z,1520512382.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:02.560Z,1520512382.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:02.963Z,1520512382.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:03.367Z,1520512383.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:03.771Z,1520512383.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:04.178Z,1520512384.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:04.567Z,1520512384.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:04.960Z,1520512384.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:05.363Z,1520512385.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:05.765Z,1520512385.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:06.161Z,1520512386.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:06.586Z,1520512386.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:06.969Z,1520512386.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:07.380Z,1520512387.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:07.774Z,1520512387.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:08.165Z,1520512388.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:08.560Z,1520512388.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:08.967Z,1520512388.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:09.365Z,1520512389.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:09.770Z,1520512389.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:10.179Z,1520512390.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:10.567Z,1520512390.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:10.966Z,1520512390.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:11.363Z,1520512391.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:11.766Z,1520512391.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:12.164Z,1520512392.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:12.585Z,1520512392.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:12.978Z,1520512392.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:13.377Z,1520512393.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:13.775Z,1520512393.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:14.170Z,1520512394.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:14.574Z,1520512394.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:14.960Z,1520512394.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:15.362Z,1520512395.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:15.786Z,1520512395.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:16.189Z,1520512396.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:16.577Z,1520512396.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:16.959Z,1520512396.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:17.360Z,1520512397.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:17.760Z,1520512397.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:18.159Z,1520512398.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:18.589Z,1520512398.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:18.968Z,1520512398.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:19.365Z,1520512399.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:19.767Z,1520512399.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:20.161Z,1520512400.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:20.562Z,1520512400.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:20.964Z,1520512400.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:21.360Z,1520512401.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:21.765Z,1520512401.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:22.165Z,1520512402.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:22.566Z,1520512402.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:22.963Z,1520512402.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:23.364Z,1520512403.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:23.763Z,1520512403.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:24.161Z,1520512404.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:24.566Z,1520512404.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:24.970Z,1520512404.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:25.370Z,1520512405.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:25.763Z,1520512405.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:26.162Z,1520512406.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:26.571Z,1520512406.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:26.965Z,1520512406.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:27.364Z,1520512407.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:27.774Z,1520512407.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:28.169Z,1520512408.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:28.569Z,1520512408.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:28.963Z,1520512408.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:29.361Z,1520512409.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:32.468Z,1520512412.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:32.607Z,1520512412.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:32.970Z,1520512412.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:33.373Z,1520512413.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:33.772Z,1520512413.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:34.161Z,1520512414.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:34.556Z,1520512414.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:34.961Z,1520512414.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:35.362Z,1520512415.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:35.771Z,1520512415.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:36.173Z,1520512416.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:36.570Z,1520512416.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:36.962Z,1520512416.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:37.365Z,1520512417.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:37.762Z,1520512417.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:38.161Z,1520512418.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:38.567Z,1520512418.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:38.969Z,1520512418.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:39.370Z,1520512419.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:39.760Z,1520512419.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:40.161Z,1520512420.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:40.561Z,1520512420.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:40.965Z,1520512420.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:41.361Z,1520512421.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:41.774Z,1520512421.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:42.179Z,1520512422.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:42.570Z,1520512422.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:42.961Z,1520512422.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:43.365Z,1520512423.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:43.763Z,1520512423.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:44.163Z,1520512424.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:44.570Z,1520512424.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:44.969Z,1520512424.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:45.370Z,1520512425.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:45.766Z,1520512425.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:46.173Z,1520512426.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:46.575Z,1520512426.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:46.966Z,1520512426.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:47.349Z,1520512427.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:47.782Z,1520512427.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:48.176Z,1520512428.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:48.574Z,1520512428.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:48.948Z,1520512428.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:49.375Z,1520512429.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:49.751Z,1520512429.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:50.152Z,1520512430.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:50.579Z,1520512430.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:50.978Z,1520512430.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:51.381Z,1520512431.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:51.755Z,1520512431.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:52.154Z,1520512432.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:52.555Z,1520512432.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:52.958Z,1520512432.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:53.352Z,1520512433.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:53.783Z,1520512433.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:54.183Z,1520512434.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:54.561Z,1520512434.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:54.956Z,1520512434.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:55.355Z,1520512435.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:55.751Z,1520512435.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:56.155Z,1520512436.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:56.584Z,1520512436.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:56.964Z,1520512436.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:57.386Z,1520512437.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:57.753Z,1520512437.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:58.155Z,1520512438.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:58.556Z,1520512438.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:58.956Z,1520512438.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:59.354Z,1520512439.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:33:59.783Z,1520512439.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:00.183Z,1520512440.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:00.556Z,1520512440.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:00.962Z,1520512440.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:01.355Z,1520512441.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:01.755Z,1520512441.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:02.156Z,1520512442.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:02.582Z,1520512442.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:02.984Z,1520512442.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:03.363Z,1520512443.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:03.760Z,1520512443.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:04.154Z,1520512444.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:04.561Z,1520512444.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:04.962Z,1520512444.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:05.361Z,1520512445.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:05.751Z,1520512445.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:06.155Z,1520512446.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:06.554Z,1520512446.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:06.960Z,1520512446.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:07.354Z,1520512447.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:07.767Z,1520512447.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:08.159Z,1520512448.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:08.559Z,1520512448.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:08.953Z,1520512448.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:09.352Z,1520512449.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:09.755Z,1520512449.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:10.156Z,1520512450.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:10.561Z,1520512450.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:10.970Z,1520512450.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:11.366Z,1520512451.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:11.749Z,1520512451.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:12.155Z,1520512452.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:12.555Z,1520512452.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:12.959Z,1520512452.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:13.356Z,1520512453.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:13.761Z,1520512453.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:14.161Z,1520512454.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:14.562Z,1520512454.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:14.954Z,1520512454.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:15.353Z,1520512455.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:15.762Z,1520512455.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:16.157Z,1520512456.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:16.560Z,1520512456.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:16.961Z,1520512456.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:17.366Z,1520512457.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:17.748Z,1520512457.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:18.158Z,1520512458.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:18.565Z,1520512458.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:18.960Z,1520512458.960 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:18.960Z,1520512458.960 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97
2018-03-08T12:34:18.961Z,1520512458.961 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T12:34:18.962Z,1520512458.962 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:18.962Z,1520512458.962 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97
2018-03-08T12:34:18.962Z,1520512458.962 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T12:34:18.964Z,1520512458.964 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:18.964Z,1520512458.964 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 97
2018-03-08T12:34:18.964Z,1520512458.964 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T12:34:18.976Z,1520512458.976 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T12:34:18.997Z,1520512458.997 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T12:34:18.997Z,1520512458.997 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T12:34:19.397Z,1520512459.397 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T12:34:19.397Z,1520512459.397 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97
2018-03-08T12:34:19.397Z,1520512459.397 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T12:34:19.397Z,1520512459.397 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97
2018-03-08T12:34:19.398Z,1520512459.398 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T12:34:19.398Z,1520512459.398 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 97
2018-03-08T12:34:19.777Z,1520512459.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T12:34:19.778Z,1520512459.778 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:34:19.778Z,1520512459.778 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:34:19.778Z,1520512459.778 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T12:34:19.779Z,1520512459.779 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:34:19.779Z,1520512459.779 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:34:19.779Z,1520512459.779 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T12:34:19.780Z,1520512459.780 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:34:19.780Z,1520512459.780 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:34:20.172Z,1520512460.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T12:34:20.173Z,1520512460.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:20.569Z,1520512460.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T12:34:20.570Z,1520512460.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:20.966Z,1520512460.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T12:34:20.967Z,1520512460.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:21.355Z,1520512461.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T12:34:21.357Z,1520512461.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:21.760Z,1520512461.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T12:34:21.761Z,1520512461.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:22.166Z,1520512462.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T12:34:22.167Z,1520512462.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:22.572Z,1520512462.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T12:34:22.573Z,1520512462.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:22.969Z,1520512462.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T12:34:22.970Z,1520512462.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:23.368Z,1520512463.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T12:34:23.369Z,1520512463.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:23.752Z,1520512463.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T12:34:23.753Z,1520512463.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:24.159Z,1520512464.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T12:34:24.160Z,1520512464.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:24.545Z,1520512464.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T12:34:24.546Z,1520512464.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:24.967Z,1520512464.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T12:34:24.968Z,1520512464.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:25.370Z,1520512465.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T12:34:25.371Z,1520512465.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:25.778Z,1520512465.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T12:34:25.779Z,1520512465.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:26.176Z,1520512466.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T12:34:26.178Z,1520512466.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:26.575Z,1520512466.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T12:34:26.577Z,1520512466.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:26.954Z,1520512466.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T12:34:26.954Z,1520512466.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:27.348Z,1520512467.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T12:34:27.349Z,1520512467.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:27.751Z,1520512467.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T12:34:27.752Z,1520512467.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:28.153Z,1520512468.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T12:34:28.154Z,1520512468.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:28.553Z,1520512468.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T12:34:28.554Z,1520512468.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:28.978Z,1520512468.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T12:34:28.979Z,1520512468.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:28.982Z,1520512468.982 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T12:29:28.0Z
2018-03-08T12:34:28.983Z,1520512468.983 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T12:34:28.983Z,1520512468.983 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T12:34:29.372Z,1520512469.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T12:34:29.373Z,1520512469.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:32.593Z,1520512472.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T12:34:32.594Z,1520512472.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:32.733Z,1520512472.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2018-03-08T12:34:32.734Z,1520512472.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:33.053Z,1520512473.053 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0112.lzma
2018-03-08T12:34:33.124Z,1520512473.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2018-03-08T12:34:33.125Z,1520512473.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:33.500Z,1520512473.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-08T12:34:33.501Z,1520512473.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:33.851Z,1520512473.851 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0112.lzma.bak
2018-03-08T12:34:33.851Z,1520512473.851 [DataOverHttps](INFO): SBD MOMSN=7985689
2018-03-08T12:34:33.926Z,1520512473.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2018-03-08T12:34:33.927Z,1520512473.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:34.480Z,1520512474.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-03-08T12:34:34.481Z,1520512474.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:34.702Z,1520512474.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T12:34:34.703Z,1520512474.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:37.836Z,1520512477.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T12:34:37.837Z,1520512477.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:37.975Z,1520512477.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-03-08T12:34:37.976Z,1520512477.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:38.329Z,1520512478.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-03-08T12:34:38.330Z,1520512478.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:38.730Z,1520512478.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-03-08T12:34:38.731Z,1520512478.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:39.132Z,1520512479.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:39.503Z,1520512479.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:39.910Z,1520512479.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:43.001Z,1520512483.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:43.162Z,1520512483.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:43.449Z,1520512483.449 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0113.lzma
2018-03-08T12:34:43.514Z,1520512483.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:43.904Z,1520512483.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:44.243Z,1520512484.243 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0113.lzma.bak
2018-03-08T12:34:44.243Z,1520512484.243 [DataOverHttps](INFO): SBD MOMSN=7985691
2018-03-08T12:34:44.304Z,1520512484.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:44.862Z,1520512484.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:44.865Z,1520512484.865 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T12:34:44.865Z,1520512484.865 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T12:34:44.865Z,1520512484.865 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T12:34:45.106Z,1520512485.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:48.262Z,1520512488.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:48.414Z,1520512488.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:48.768Z,1520512488.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:49.162Z,1520512489.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:49.560Z,1520512489.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:49.959Z,1520512489.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:50.360Z,1520512490.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:50.768Z,1520512490.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:51.168Z,1520512491.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:51.591Z,1520512491.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:51.967Z,1520512491.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:52.361Z,1520512492.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:52.763Z,1520512492.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:53.163Z,1520512493.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:53.569Z,1520512493.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:53.968Z,1520512493.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:54.365Z,1520512494.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:54.761Z,1520512494.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:55.155Z,1520512495.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:55.559Z,1520512495.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:55.962Z,1520512495.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:56.361Z,1520512496.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:56.768Z,1520512496.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:57.168Z,1520512497.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:57.590Z,1520512497.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:57.961Z,1520512497.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:58.361Z,1520512498.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:58.762Z,1520512498.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:59.161Z,1520512499.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:59.570Z,1520512499.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:34:59.968Z,1520512499.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:00.368Z,1520512500.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:00.760Z,1520512500.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:01.163Z,1520512501.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:01.566Z,1520512501.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:01.966Z,1520512501.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:02.363Z,1520512502.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:02.765Z,1520512502.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:03.164Z,1520512503.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:03.564Z,1520512503.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:03.955Z,1520512503.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:04.359Z,1520512504.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:04.764Z,1520512504.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:05.161Z,1520512505.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:05.569Z,1520512505.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:05.968Z,1520512505.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:06.363Z,1520512506.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:06.757Z,1520512506.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:07.161Z,1520512507.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:07.558Z,1520512507.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:07.966Z,1520512507.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:08.362Z,1520512508.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:08.763Z,1520512508.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:09.164Z,1520512509.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:09.568Z,1520512509.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:09.961Z,1520512509.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:10.360Z,1520512510.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:10.762Z,1520512510.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:11.166Z,1520512511.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:11.568Z,1520512511.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:11.968Z,1520512511.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:12.370Z,1520512512.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:12.761Z,1520512512.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:13.162Z,1520512513.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:13.564Z,1520512513.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:13.962Z,1520512513.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:14.359Z,1520512514.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:14.768Z,1520512514.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:15.168Z,1520512515.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:15.574Z,1520512515.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:15.962Z,1520512515.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:16.359Z,1520512516.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:16.763Z,1520512516.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:17.158Z,1520512517.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:17.567Z,1520512517.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:17.967Z,1520512517.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:18.367Z,1520512518.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:18.761Z,1520512518.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:19.159Z,1520512519.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:19.561Z,1520512519.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:19.963Z,1520512519.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:20.362Z,1520512520.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:20.768Z,1520512520.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:21.171Z,1520512521.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:21.611Z,1520512521.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:21.954Z,1520512521.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:22.351Z,1520512522.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:22.750Z,1520512522.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:23.158Z,1520512523.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:23.568Z,1520512523.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:23.967Z,1520512523.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:24.393Z,1520512524.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:24.763Z,1520512524.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:25.170Z,1520512525.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:25.566Z,1520512525.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:25.971Z,1520512525.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:26.353Z,1520512526.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:26.756Z,1520512526.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:27.177Z,1520512527.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:27.579Z,1520512527.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:27.954Z,1520512527.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:28.358Z,1520512528.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:28.755Z,1520512528.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:29.151Z,1520512529.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:29.584Z,1520512529.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:29.964Z,1520512529.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:30.386Z,1520512530.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:30.759Z,1520512530.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:31.159Z,1520512531.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:31.555Z,1520512531.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:31.966Z,1520512531.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:32.359Z,1520512532.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:32.762Z,1520512532.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:33.164Z,1520512533.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:33.571Z,1520512533.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:33.959Z,1520512533.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:34.358Z,1520512534.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:34.759Z,1520512534.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:35.159Z,1520512535.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:35.561Z,1520512535.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:35.971Z,1520512535.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:36.372Z,1520512536.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:36.758Z,1520512536.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:37.157Z,1520512537.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:37.558Z,1520512537.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:37.958Z,1520512537.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:38.362Z,1520512538.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:38.764Z,1520512538.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:39.164Z,1520512539.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:39.564Z,1520512539.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:39.962Z,1520512539.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:40.362Z,1520512540.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:40.767Z,1520512540.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:41.170Z,1520512541.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:41.568Z,1520512541.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:41.968Z,1520512541.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:42.367Z,1520512542.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:42.766Z,1520512542.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:43.162Z,1520512543.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:43.556Z,1520512543.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:43.958Z,1520512543.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:44.362Z,1520512544.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:44.768Z,1520512544.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:45.171Z,1520512545.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:45.575Z,1520512545.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:48.659Z,1520512548.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:48.802Z,1520512548.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:49.148Z,1520512549.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:49.551Z,1520512549.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:49.958Z,1520512549.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:50.347Z,1520512550.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:50.730Z,1520512550.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:51.122Z,1520512551.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:51.548Z,1520512551.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:51.954Z,1520512551.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:52.352Z,1520512552.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:52.727Z,1520512552.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:53.122Z,1520512553.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:53.529Z,1520512553.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:53.951Z,1520512553.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:54.358Z,1520512554.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:54.724Z,1520512554.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:55.150Z,1520512555.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:55.532Z,1520512555.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:55.954Z,1520512555.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:56.336Z,1520512556.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:56.731Z,1520512556.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:57.123Z,1520512557.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:57.544Z,1520512557.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:57.940Z,1520512557.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:58.340Z,1520512558.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:58.738Z,1520512558.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:59.129Z,1520512559.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:59.536Z,1520512559.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:35:59.942Z,1520512559.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:00.338Z,1520512560.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:00.727Z,1520512560.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:01.130Z,1520512561.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:01.536Z,1520512561.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:01.942Z,1520512561.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:02.337Z,1520512562.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:02.735Z,1520512562.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:03.134Z,1520512563.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:03.543Z,1520512563.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:03.946Z,1520512563.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:04.340Z,1520512564.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:04.736Z,1520512564.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:05.136Z,1520512565.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:05.547Z,1520512565.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:05.941Z,1520512565.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:06.351Z,1520512566.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:06.736Z,1520512566.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:07.139Z,1520512567.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:07.547Z,1520512567.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:07.956Z,1520512567.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:08.346Z,1520512568.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:08.742Z,1520512568.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:09.142Z,1520512569.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:09.547Z,1520512569.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:09.946Z,1520512569.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:10.345Z,1520512570.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:10.741Z,1520512570.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:11.142Z,1520512571.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:11.539Z,1520512571.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:11.959Z,1520512571.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:12.347Z,1520512572.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:12.746Z,1520512572.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:13.150Z,1520512573.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:13.551Z,1520512573.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:13.953Z,1520512573.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:14.349Z,1520512574.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:14.730Z,1520512574.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:15.124Z,1520512575.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:15.549Z,1520512575.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:15.950Z,1520512575.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:16.348Z,1520512576.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:16.731Z,1520512576.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:17.126Z,1520512577.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:17.553Z,1520512577.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:17.940Z,1520512577.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:18.344Z,1520512578.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:18.739Z,1520512578.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:19.131Z,1520512579.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:19.537Z,1520512579.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:19.941Z,1520512579.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:20.337Z,1520512580.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:20.735Z,1520512580.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:21.127Z,1520512581.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:21.536Z,1520512581.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:21.940Z,1520512581.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:22.339Z,1520512582.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:22.739Z,1520512582.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:23.133Z,1520512583.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:23.536Z,1520512583.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:23.940Z,1520512583.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:24.338Z,1520512584.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:24.734Z,1520512584.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:25.133Z,1520512585.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:25.536Z,1520512585.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:25.940Z,1520512585.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:26.337Z,1520512586.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:26.734Z,1520512586.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:27.134Z,1520512587.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:27.537Z,1520512587.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:27.940Z,1520512587.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:28.336Z,1520512588.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:28.739Z,1520512588.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:29.133Z,1520512589.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:29.535Z,1520512589.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:29.940Z,1520512589.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:30.339Z,1520512590.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:30.728Z,1520512590.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:31.131Z,1520512591.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:31.536Z,1520512591.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:31.940Z,1520512591.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:32.335Z,1520512592.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:32.734Z,1520512592.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:33.134Z,1520512593.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:33.537Z,1520512593.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:33.940Z,1520512593.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:34.337Z,1520512594.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:34.739Z,1520512594.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:35.134Z,1520512595.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:35.535Z,1520512595.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:35.940Z,1520512595.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:36.338Z,1520512596.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:36.727Z,1520512596.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:37.134Z,1520512597.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:37.536Z,1520512597.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:37.941Z,1520512597.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:38.337Z,1520512598.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:38.738Z,1520512598.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:39.133Z,1520512599.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:39.535Z,1520512599.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:39.939Z,1520512599.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:40.337Z,1520512600.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:40.732Z,1520512600.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:41.135Z,1520512601.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:41.547Z,1520512601.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:41.940Z,1520512601.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:42.347Z,1520512602.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:42.730Z,1520512602.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:43.135Z,1520512603.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:43.541Z,1520512603.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:43.941Z,1520512603.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:44.340Z,1520512604.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:44.737Z,1520512604.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:45.134Z,1520512605.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:45.540Z,1520512605.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:45.941Z,1520512605.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:49.039Z,1520512609.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:49.179Z,1520512609.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:49.537Z,1520512609.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:49.930Z,1520512609.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:50.335Z,1520512610.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:50.741Z,1520512610.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:51.139Z,1520512611.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:51.538Z,1520512611.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:51.930Z,1520512611.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:52.339Z,1520512612.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:52.730Z,1520512612.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:53.118Z,1520512613.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:53.544Z,1520512613.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:53.949Z,1520512613.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:54.350Z,1520512614.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:54.742Z,1520512614.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:55.122Z,1520512615.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:55.554Z,1520512615.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:55.944Z,1520512615.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:56.344Z,1520512616.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:56.727Z,1520512616.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:57.120Z,1520512617.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:57.553Z,1520512617.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:57.957Z,1520512617.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:58.355Z,1520512618.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:58.726Z,1520512618.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:59.127Z,1520512619.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:59.554Z,1520512619.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:36:59.936Z,1520512619.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:00.338Z,1520512620.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:00.734Z,1520512620.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:01.129Z,1520512621.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:01.532Z,1520512621.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:01.936Z,1520512621.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:02.338Z,1520512622.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:02.727Z,1520512622.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:03.127Z,1520512623.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:03.535Z,1520512623.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:03.935Z,1520512623.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:04.335Z,1520512624.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:04.726Z,1520512624.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:05.126Z,1520512625.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:05.543Z,1520512625.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:05.937Z,1520512625.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:06.335Z,1520512626.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:06.732Z,1520512626.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:07.125Z,1520512627.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:07.542Z,1520512627.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:07.936Z,1520512627.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:08.335Z,1520512628.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:08.727Z,1520512628.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:09.135Z,1520512629.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:09.535Z,1520512629.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:09.934Z,1520512629.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:10.335Z,1520512630.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:10.731Z,1520512630.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:11.162Z,1520512631.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:11.535Z,1520512631.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:11.935Z,1520512631.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:12.335Z,1520512632.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:12.731Z,1520512632.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:13.130Z,1520512633.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:13.536Z,1520512633.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:13.936Z,1520512633.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:14.335Z,1520512634.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:14.731Z,1520512634.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:15.134Z,1520512635.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:15.535Z,1520512635.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:15.935Z,1520512635.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:16.343Z,1520512636.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:16.730Z,1520512636.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:17.126Z,1520512637.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:17.543Z,1520512637.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:17.936Z,1520512637.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:18.336Z,1520512638.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:18.727Z,1520512638.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:19.130Z,1520512639.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:19.536Z,1520512639.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:19.936Z,1520512639.936 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:19.936Z,1520512639.936 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98
2018-03-08T12:37:19.936Z,1520512639.936 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T12:37:19.938Z,1520512639.938 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:19.938Z,1520512639.938 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98
2018-03-08T12:37:19.938Z,1520512639.938 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T12:37:19.940Z,1520512639.940 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:19.940Z,1520512639.940 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 98
2018-03-08T12:37:19.940Z,1520512639.940 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T12:37:19.973Z,1520512639.973 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T12:37:19.973Z,1520512639.973 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T12:37:19.973Z,1520512639.973 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T12:37:20.363Z,1520512640.363 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T12:37:20.364Z,1520512640.364 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98
2018-03-08T12:37:20.364Z,1520512640.364 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T12:37:20.364Z,1520512640.364 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98
2018-03-08T12:37:20.369Z,1520512640.369 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T12:37:20.369Z,1520512640.369 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 98
2018-03-08T12:37:20.731Z,1520512640.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T12:37:20.731Z,1520512640.731 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:37:20.731Z,1520512640.731 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:37:20.732Z,1520512640.732 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T12:37:20.732Z,1520512640.732 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:37:20.733Z,1520512640.733 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:37:20.733Z,1520512640.733 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T12:37:20.733Z,1520512640.733 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:37:20.734Z,1520512640.734 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:37:21.138Z,1520512641.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T12:37:21.139Z,1520512641.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:21.542Z,1520512641.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T12:37:21.543Z,1520512641.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:21.945Z,1520512641.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T12:37:21.946Z,1520512641.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:22.342Z,1520512642.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T12:37:22.343Z,1520512642.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:22.728Z,1520512642.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T12:37:22.729Z,1520512642.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:23.128Z,1520512643.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T12:37:23.130Z,1520512643.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:23.540Z,1520512643.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T12:37:23.541Z,1520512643.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:23.940Z,1520512643.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T12:37:23.941Z,1520512643.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:24.337Z,1520512644.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T12:37:24.337Z,1520512644.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:24.777Z,1520512644.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T12:37:24.778Z,1520512644.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:25.146Z,1520512645.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T12:37:25.147Z,1520512645.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:25.540Z,1520512645.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T12:37:25.541Z,1520512645.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:25.940Z,1520512645.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T12:37:25.941Z,1520512645.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:26.336Z,1520512646.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T12:37:26.337Z,1520512646.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:26.729Z,1520512646.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T12:37:26.730Z,1520512646.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:27.132Z,1520512647.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T12:37:27.133Z,1520512647.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:27.536Z,1520512647.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T12:37:27.537Z,1520512647.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:27.936Z,1520512647.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T12:37:27.937Z,1520512647.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:28.340Z,1520512648.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T12:37:28.341Z,1520512648.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:28.728Z,1520512648.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T12:37:28.729Z,1520512648.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:29.131Z,1520512649.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T12:37:29.132Z,1520512649.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:29.540Z,1520512649.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T12:37:29.541Z,1520512649.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:29.944Z,1520512649.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T12:37:29.945Z,1520512649.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:30.341Z,1520512650.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T12:37:30.342Z,1520512650.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:30.731Z,1520512650.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T12:37:30.732Z,1520512650.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:31.126Z,1520512651.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T12:37:31.127Z,1520512651.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:31.546Z,1520512651.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T12:37:31.547Z,1520512651.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:31.944Z,1520512651.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T12:37:31.945Z,1520512651.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:32.336Z,1520512652.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T12:37:32.337Z,1520512652.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:32.734Z,1520512652.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T12:37:32.735Z,1520512652.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:33.131Z,1520512653.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T12:37:33.132Z,1520512653.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:33.540Z,1520512653.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T12:37:33.541Z,1520512653.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:33.942Z,1520512653.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T12:37:33.943Z,1520512653.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:34.334Z,1520512654.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T12:37:34.335Z,1520512654.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:34.729Z,1520512654.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T12:37:34.730Z,1520512654.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:35.130Z,1520512655.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T12:37:35.131Z,1520512655.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:35.538Z,1520512655.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T12:37:35.539Z,1520512655.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:35.951Z,1520512655.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T12:37:35.952Z,1520512655.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:36.342Z,1520512656.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T12:37:36.343Z,1520512656.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:36.734Z,1520512656.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T12:37:36.735Z,1520512656.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:37.134Z,1520512657.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T12:37:37.135Z,1520512657.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:37.541Z,1520512657.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T12:37:37.542Z,1520512657.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:37.945Z,1520512657.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T12:37:37.946Z,1520512657.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:38.340Z,1520512658.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T12:37:38.341Z,1520512658.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:38.730Z,1520512658.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T12:37:38.730Z,1520512658.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:39.128Z,1520512659.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T12:37:39.129Z,1520512659.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:39.536Z,1520512659.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T12:37:39.537Z,1520512659.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:39.936Z,1520512659.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:40.340Z,1520512660.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:40.729Z,1520512660.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:41.130Z,1520512661.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:41.537Z,1520512661.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:41.940Z,1520512661.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:42.343Z,1520512662.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:42.732Z,1520512662.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:43.127Z,1520512663.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:43.547Z,1520512663.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:43.951Z,1520512663.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:44.340Z,1520512664.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:44.729Z,1520512664.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:45.138Z,1520512665.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:45.538Z,1520512665.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:45.948Z,1520512665.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:46.341Z,1520512666.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:49.477Z,1520512669.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:49.602Z,1520512669.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:49.979Z,1520512669.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:50.376Z,1520512670.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:50.786Z,1520512670.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:51.158Z,1520512671.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:51.550Z,1520512671.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:51.954Z,1520512671.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:52.350Z,1520512672.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:52.768Z,1520512672.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:53.234Z,1520512673.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:53.564Z,1520512673.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:53.951Z,1520512673.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:54.351Z,1520512674.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:54.754Z,1520512674.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:55.151Z,1520512675.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:55.564Z,1520512675.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:55.986Z,1520512675.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:56.375Z,1520512676.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:56.765Z,1520512676.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:57.161Z,1520512677.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:57.563Z,1520512677.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:57.963Z,1520512677.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:58.361Z,1520512678.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:58.769Z,1520512678.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:59.174Z,1520512679.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:59.567Z,1520512679.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:37:59.964Z,1520512679.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:00.365Z,1520512680.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:00.762Z,1520512680.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:01.165Z,1520512681.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:01.572Z,1520512681.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:01.971Z,1520512681.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:02.385Z,1520512682.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:02.764Z,1520512682.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:03.170Z,1520512683.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:03.566Z,1520512683.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:03.964Z,1520512683.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:04.371Z,1520512684.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:04.777Z,1520512684.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:05.178Z,1520512685.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:05.572Z,1520512685.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:05.971Z,1520512685.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:06.369Z,1520512686.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:06.769Z,1520512686.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:07.170Z,1520512687.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:07.576Z,1520512687.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:07.978Z,1520512687.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:08.374Z,1520512688.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:08.774Z,1520512688.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:09.171Z,1520512689.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:09.570Z,1520512689.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:09.967Z,1520512689.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:10.352Z,1520512690.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:10.778Z,1520512690.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:11.172Z,1520512691.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:11.571Z,1520512691.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:11.970Z,1520512691.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:12.375Z,1520512692.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:12.755Z,1520512692.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:13.178Z,1520512693.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:13.584Z,1520512693.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:13.979Z,1520512693.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:14.380Z,1520512694.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:14.762Z,1520512694.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:15.155Z,1520512695.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:15.557Z,1520512695.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:15.960Z,1520512695.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:16.359Z,1520512696.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:16.761Z,1520512696.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:17.165Z,1520512697.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:17.594Z,1520512697.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:17.959Z,1520512697.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:18.370Z,1520512698.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:18.767Z,1520512698.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:19.156Z,1520512699.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:19.561Z,1520512699.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:19.971Z,1520512699.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:20.360Z,1520512700.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:20.757Z,1520512700.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:21.159Z,1520512701.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:21.556Z,1520512701.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:21.959Z,1520512701.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:22.357Z,1520512702.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:22.761Z,1520512702.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:23.172Z,1520512703.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:23.564Z,1520512703.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:23.961Z,1520512703.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:24.363Z,1520512704.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:24.761Z,1520512704.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:25.159Z,1520512705.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:25.565Z,1520512705.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:25.970Z,1520512705.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:26.364Z,1520512706.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:26.759Z,1520512706.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:27.161Z,1520512707.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:27.559Z,1520512707.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:27.966Z,1520512707.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:28.362Z,1520512708.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:28.770Z,1520512708.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:29.176Z,1520512709.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:29.572Z,1520512709.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:29.960Z,1520512709.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:30.371Z,1520512710.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:30.764Z,1520512710.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:31.167Z,1520512711.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:31.574Z,1520512711.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:31.972Z,1520512711.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:32.373Z,1520512712.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:32.766Z,1520512712.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:33.160Z,1520512713.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:33.566Z,1520512713.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:33.966Z,1520512713.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:34.365Z,1520512714.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:34.768Z,1520512714.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:35.172Z,1520512715.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:35.574Z,1520512715.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:35.967Z,1520512715.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:36.365Z,1520512716.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:36.761Z,1520512716.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:37.171Z,1520512717.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:37.573Z,1520512717.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:37.983Z,1520512717.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:38.370Z,1520512718.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:38.766Z,1520512718.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:39.166Z,1520512719.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:39.556Z,1520512719.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:39.971Z,1520512719.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:40.351Z,1520512720.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:40.762Z,1520512720.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:41.178Z,1520512721.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:41.578Z,1520512721.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:41.974Z,1520512721.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:42.351Z,1520512722.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:42.759Z,1520512722.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:43.150Z,1520512723.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:43.576Z,1520512723.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:43.975Z,1520512723.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:44.380Z,1520512724.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:44.759Z,1520512724.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:45.159Z,1520512725.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:45.556Z,1520512725.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:45.959Z,1520512725.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:46.359Z,1520512726.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:49.502Z,1520512729.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:49.659Z,1520512729.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:49.984Z,1520512729.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:50.384Z,1520512730.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:50.783Z,1520512730.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:51.163Z,1520512731.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:51.588Z,1520512731.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:51.984Z,1520512731.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:52.389Z,1520512732.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:52.767Z,1520512732.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:53.164Z,1520512733.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:53.585Z,1520512733.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:53.966Z,1520512733.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:54.391Z,1520512734.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:54.797Z,1520512734.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:55.202Z,1520512735.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:55.569Z,1520512735.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:55.968Z,1520512735.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:56.371Z,1520512736.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:56.768Z,1520512736.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:57.195Z,1520512737.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:57.600Z,1520512737.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:57.997Z,1520512737.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:58.373Z,1520512738.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:58.771Z,1520512738.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:59.179Z,1520512739.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:59.571Z,1520512739.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:38:59.972Z,1520512739.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:00.374Z,1520512740.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:00.739Z,1520512740.739 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T12:39:00.739Z,1520512740.739 [NAL9602] Data Fault, FailCount= 3
2018-03-08T12:39:00.740Z,1520512740.740 [NAL9602](ERROR): Data Fault
2018-03-08T12:39:00.771Z,1520512740.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:00.784Z,1520512740.784 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T12:39:01.147Z,1520512741.147 [NAL9602](INFO): Powering down
2018-03-08T12:39:01.215Z,1520512741.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:01.565Z,1520512741.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:01.979Z,1520512741.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:01.000Z,1520512742.000 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T12:39:01.000Z,1520512742.000 [NAL9602] No Fault, FailCount= 3
2018-03-08T12:39:02.369Z,1520512742.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:02.768Z,1520512742.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:03.171Z,1520512743.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:03.573Z,1520512743.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:03.967Z,1520512743.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:04.378Z,1520512744.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:04.774Z,1520512744.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:05.167Z,1520512745.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:05.574Z,1520512745.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:05.972Z,1520512745.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:06.371Z,1520512746.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:06.774Z,1520512746.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:07.174Z,1520512747.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:07.575Z,1520512747.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:07.979Z,1520512747.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:08.373Z,1520512748.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:08.775Z,1520512748.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:09.182Z,1520512749.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:09.574Z,1520512749.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:09.977Z,1520512749.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:10.371Z,1520512750.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:10.774Z,1520512750.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:11.175Z,1520512751.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:11.572Z,1520512751.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:11.972Z,1520512751.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:12.375Z,1520512752.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:12.778Z,1520512752.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:13.174Z,1520512753.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:13.563Z,1520512753.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:13.982Z,1520512753.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:14.379Z,1520512754.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:14.755Z,1520512754.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:15.181Z,1520512755.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:15.581Z,1520512755.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:15.981Z,1520512755.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:16.387Z,1520512756.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:16.766Z,1520512756.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:17.185Z,1520512757.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:17.563Z,1520512757.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:17.969Z,1520512757.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:18.362Z,1520512758.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:18.766Z,1520512758.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:19.169Z,1520512759.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:19.558Z,1520512759.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:19.989Z,1520512759.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:20.362Z,1520512760.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:20.762Z,1520512760.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:21.168Z,1520512761.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:21.566Z,1520512761.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:21.970Z,1520512761.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:22.366Z,1520512762.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:22.769Z,1520512762.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:23.162Z,1520512763.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:23.574Z,1520512763.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:23.966Z,1520512763.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:24.366Z,1520512764.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:24.771Z,1520512764.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:25.166Z,1520512765.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:25.566Z,1520512765.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:25.978Z,1520512765.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:26.370Z,1520512766.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:26.767Z,1520512766.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:27.179Z,1520512767.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:27.573Z,1520512767.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:27.974Z,1520512767.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:28.378Z,1520512768.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:28.773Z,1520512768.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:29.174Z,1520512769.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:29.574Z,1520512769.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:29.973Z,1520512769.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:30.369Z,1520512770.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:30.771Z,1520512770.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:31.173Z,1520512771.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:31.527Z,1520512771.527 [NAL9602](INFO): Powering up NAL9602
2018-03-08T12:39:31.573Z,1520512771.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:31.974Z,1520512771.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:32.370Z,1520512772.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:32.765Z,1520512772.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:33.170Z,1520512773.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:33.571Z,1520512773.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:33.975Z,1520512773.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:34.374Z,1520512774.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:34.773Z,1520512774.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:35.174Z,1520512775.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:35.575Z,1520512775.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:35.972Z,1520512775.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:36.380Z,1520512776.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:36.775Z,1520512776.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:37.174Z,1520512777.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:37.568Z,1520512777.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:37.974Z,1520512777.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:38.376Z,1520512778.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:38.763Z,1520512778.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:39.177Z,1520512779.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:39.578Z,1520512779.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:39.975Z,1520512779.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:40.378Z,1520512780.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:40.776Z,1520512780.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:41.174Z,1520512781.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:41.576Z,1520512781.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:41.983Z,1520512781.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:42.334Z,1520512782.334 [NAL9602](INFO): NAL9602 initialized
2018-03-08T12:39:42.386Z,1520512782.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:42.777Z,1520512782.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:43.202Z,1520512783.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:43.585Z,1520512783.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:43.983Z,1520512783.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:44.377Z,1520512784.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:44.782Z,1520512784.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:45.183Z,1520512785.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:45.190Z,1520512785.190 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T12:39:45.190Z,1520512785.190 [Default:CheckIn:C.Wait] Stopped
2018-03-08T12:39:45.190Z,1520512785.190 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T12:39:45.190Z,1520512785.190 [Default:CheckIn:D] Running Loop=1
2018-03-08T12:39:45.587Z,1520512785.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:45.590Z,1520512785.590 [Default:CheckIn:D] Stopped
2018-03-08T12:39:45.590Z,1520512785.590 [Default:CheckIn:E] Running Loop=1
2018-03-08T12:39:45.994Z,1520512785.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:45.998Z,1520512785.998 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 294.013086 min 
2018-03-08T12:39:45.998Z,1520512785.998 [Default:CheckIn:E] Stopped
2018-03-08T12:39:45.998Z,1520512785.998 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T12:39:45.998Z,1520512785.998 [Default:CheckIn] Stopped
2018-03-08T12:39:45.998Z,1520512785.998 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T12:39:45.998Z,1520512785.998 [Default:CheckIn](INFO): Running loop #29
2018-03-08T12:39:45.998Z,1520512785.998 [Default:CheckIn] Running Loop=29
2018-03-08T12:39:45.998Z,1520512785.998 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T12:39:45.999Z,1520512785.999 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T12:39:46.392Z,1520512786.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:49.494Z,1520512789.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:49.622Z,1520512789.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:49.987Z,1520512789.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:50.390Z,1520512790.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:50.790Z,1520512790.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:51.165Z,1520512791.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:51.566Z,1520512791.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:51.966Z,1520512791.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:52.387Z,1520512792.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:52.794Z,1520512792.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:53.168Z,1520512793.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:53.564Z,1520512793.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:53.963Z,1520512793.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:54.391Z,1520512794.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:54.788Z,1520512794.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:55.190Z,1520512795.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:55.563Z,1520512795.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:55.967Z,1520512795.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:56.394Z,1520512796.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:56.788Z,1520512796.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:57.184Z,1520512797.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:57.570Z,1520512797.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:57.963Z,1520512797.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:58.372Z,1520512798.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:58.776Z,1520512798.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:59.195Z,1520512799.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:59.567Z,1520512799.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:39:59.970Z,1520512799.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:00.374Z,1520512800.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:00.776Z,1520512800.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:01.197Z,1520512801.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:01.575Z,1520512801.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:01.969Z,1520512801.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:02.377Z,1520512802.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:02.776Z,1520512802.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:03.172Z,1520512803.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:03.568Z,1520512803.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:03.969Z,1520512803.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:04.373Z,1520512804.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:04.773Z,1520512804.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:05.172Z,1520512805.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:05.567Z,1520512805.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:05.970Z,1520512805.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:06.372Z,1520512806.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:06.772Z,1520512806.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:07.173Z,1520512807.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:07.568Z,1520512807.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:07.967Z,1520512807.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:08.377Z,1520512808.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:08.776Z,1520512808.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:09.173Z,1520512809.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:09.571Z,1520512809.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:09.965Z,1520512809.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:10.372Z,1520512810.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:10.777Z,1520512810.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:11.173Z,1520512811.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:11.568Z,1520512811.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:11.971Z,1520512811.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:12.372Z,1520512812.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:12.777Z,1520512812.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:13.173Z,1520512813.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:13.574Z,1520512813.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:13.971Z,1520512813.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:14.373Z,1520512814.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:14.777Z,1520512814.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:15.172Z,1520512815.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:15.563Z,1520512815.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:15.965Z,1520512815.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:16.371Z,1520512816.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:16.776Z,1520512816.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:17.172Z,1520512817.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:17.568Z,1520512817.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:17.970Z,1520512817.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:18.375Z,1520512818.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:18.776Z,1520512818.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:19.175Z,1520512819.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:19.571Z,1520512819.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:19.965Z,1520512819.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:20.382Z,1520512820.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:20.777Z,1520512820.777 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:20.777Z,1520512820.777 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99
2018-03-08T12:40:20.777Z,1520512820.777 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T12:40:20.779Z,1520512820.779 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:20.779Z,1520512820.779 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99
2018-03-08T12:40:20.779Z,1520512820.779 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T12:40:20.781Z,1520512820.781 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:20.781Z,1520512820.781 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 99
2018-03-08T12:40:20.781Z,1520512820.781 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T12:40:20.813Z,1520512820.813 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T12:40:20.813Z,1520512820.813 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T12:40:20.814Z,1520512820.814 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T12:40:21.213Z,1520512821.213 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T12:40:21.213Z,1520512821.213 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99
2018-03-08T12:40:21.213Z,1520512821.213 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T12:40:21.214Z,1520512821.214 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99
2018-03-08T12:40:21.214Z,1520512821.214 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T12:40:21.214Z,1520512821.214 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 99
2018-03-08T12:40:21.570Z,1520512821.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T12:40:21.570Z,1520512821.570 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:40:21.571Z,1520512821.571 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:40:21.571Z,1520512821.571 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T12:40:21.572Z,1520512821.572 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:40:21.572Z,1520512821.572 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:40:21.572Z,1520512821.572 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T12:40:21.573Z,1520512821.573 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:40:21.573Z,1520512821.573 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:40:21.973Z,1520512821.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T12:40:21.974Z,1520512821.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:22.376Z,1520512822.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T12:40:22.377Z,1520512822.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:22.777Z,1520512822.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T12:40:22.778Z,1520512822.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:23.180Z,1520512823.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T12:40:23.181Z,1520512823.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:23.574Z,1520512823.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T12:40:23.575Z,1520512823.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:23.974Z,1520512823.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T12:40:23.975Z,1520512823.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:24.380Z,1520512824.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T12:40:24.381Z,1520512824.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:24.780Z,1520512824.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T12:40:24.781Z,1520512824.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:25.181Z,1520512825.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T12:40:25.186Z,1520512825.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:25.573Z,1520512825.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T12:40:25.574Z,1520512825.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:25.972Z,1520512825.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T12:40:25.973Z,1520512825.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:26.380Z,1520512826.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T12:40:26.381Z,1520512826.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:26.781Z,1520512826.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T12:40:26.782Z,1520512826.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:27.175Z,1520512827.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T12:40:27.177Z,1520512827.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:27.574Z,1520512827.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T12:40:27.575Z,1520512827.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:27.970Z,1520512827.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T12:40:27.971Z,1520512827.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:28.379Z,1520512828.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T12:40:28.380Z,1520512828.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:28.777Z,1520512828.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T12:40:28.778Z,1520512828.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:29.180Z,1520512829.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T12:40:29.181Z,1520512829.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:29.572Z,1520512829.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T12:40:29.573Z,1520512829.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:29.974Z,1520512829.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T12:40:29.975Z,1520512829.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:30.381Z,1520512830.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T12:40:30.382Z,1520512830.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:30.781Z,1520512830.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T12:40:30.782Z,1520512830.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:31.179Z,1520512831.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T12:40:31.180Z,1520512831.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:31.571Z,1520512831.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T12:40:31.573Z,1520512831.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:31.972Z,1520512831.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T12:40:31.973Z,1520512831.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:32.380Z,1520512832.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T12:40:32.381Z,1520512832.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:32.784Z,1520512832.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T12:40:32.785Z,1520512832.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:33.179Z,1520512833.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T12:40:33.180Z,1520512833.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:33.575Z,1520512833.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T12:40:33.575Z,1520512833.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:33.971Z,1520512833.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T12:40:33.971Z,1520512833.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:34.376Z,1520512834.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T12:40:34.377Z,1520512834.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:34.777Z,1520512834.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T12:40:34.778Z,1520512834.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:35.181Z,1520512835.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T12:40:35.182Z,1520512835.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:35.574Z,1520512835.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T12:40:35.575Z,1520512835.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:36.001Z,1520512836.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T12:40:36.002Z,1520512836.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:36.386Z,1520512836.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T12:40:36.387Z,1520512836.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:36.786Z,1520512836.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T12:40:36.787Z,1520512836.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:37.186Z,1520512837.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T12:40:37.187Z,1520512837.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:37.602Z,1520512837.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T12:40:37.603Z,1520512837.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:37.979Z,1520512837.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T12:40:37.979Z,1520512837.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:38.388Z,1520512838.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T12:40:38.389Z,1520512838.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:38.790Z,1520512838.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T12:40:38.791Z,1520512838.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:39.190Z,1520512839.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T12:40:39.191Z,1520512839.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:39.558Z,1520512839.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T12:40:39.559Z,1520512839.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:39.988Z,1520512839.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T12:40:39.989Z,1520512839.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:40.382Z,1520512840.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T12:40:40.383Z,1520512840.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:40.785Z,1520512840.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:41.202Z,1520512841.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:41.559Z,1520512841.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:41.961Z,1520512841.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:42.385Z,1520512842.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:42.786Z,1520512842.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:43.195Z,1520512843.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:43.564Z,1520512843.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:43.990Z,1520512843.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:44.394Z,1520512844.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:44.789Z,1520512844.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:45.187Z,1520512845.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:45.564Z,1520512845.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:45.970Z,1520512845.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:46.394Z,1520512846.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:49.497Z,1520512849.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:49.649Z,1520512849.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:49.974Z,1520512849.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:50.369Z,1520512850.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:50.767Z,1520512850.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:51.172Z,1520512851.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:51.574Z,1520512851.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:51.983Z,1520512851.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:52.373Z,1520512852.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:52.770Z,1520512852.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:53.169Z,1520512853.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:53.568Z,1520512853.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:53.966Z,1520512853.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:54.373Z,1520512854.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:54.777Z,1520512854.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:55.179Z,1520512855.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:55.564Z,1520512855.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:55.965Z,1520512855.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:56.378Z,1520512856.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:56.771Z,1520512856.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:57.172Z,1520512857.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:57.570Z,1520512857.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:57.969Z,1520512857.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:58.373Z,1520512858.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:58.776Z,1520512858.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:59.178Z,1520512859.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:59.574Z,1520512859.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:40:59.969Z,1520512859.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:00.372Z,1520512860.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:00.776Z,1520512860.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:01.173Z,1520512861.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:01.574Z,1520512861.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:01.969Z,1520512861.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:02.372Z,1520512862.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:02.772Z,1520512862.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:03.171Z,1520512863.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:03.570Z,1520512863.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:03.969Z,1520512863.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:04.382Z,1520512864.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:04.779Z,1520512864.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:05.186Z,1520512865.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:05.570Z,1520512865.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:05.967Z,1520512865.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:06.376Z,1520512866.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:06.779Z,1520512866.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:07.179Z,1520512867.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:07.574Z,1520512867.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:07.974Z,1520512867.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:08.379Z,1520512868.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:08.775Z,1520512868.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:09.179Z,1520512869.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:09.571Z,1520512869.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:09.974Z,1520512869.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:10.376Z,1520512870.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:10.780Z,1520512870.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:11.185Z,1520512871.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:11.570Z,1520512871.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:11.966Z,1520512871.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:12.379Z,1520512872.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:12.780Z,1520512872.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:13.186Z,1520512873.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:13.571Z,1520512873.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:13.970Z,1520512873.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:14.380Z,1520512874.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:14.782Z,1520512874.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:15.179Z,1520512875.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:15.572Z,1520512875.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:15.974Z,1520512875.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:16.379Z,1520512876.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:16.779Z,1520512876.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:17.180Z,1520512877.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:17.573Z,1520512877.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:17.974Z,1520512877.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:18.378Z,1520512878.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:18.786Z,1520512878.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:19.180Z,1520512879.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:19.578Z,1520512879.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:19.974Z,1520512879.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:20.381Z,1520512880.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:20.773Z,1520512880.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:21.176Z,1520512881.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:21.571Z,1520512881.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:21.974Z,1520512881.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:22.380Z,1520512882.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:22.779Z,1520512882.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:23.179Z,1520512883.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:23.574Z,1520512883.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:23.966Z,1520512883.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:24.382Z,1520512884.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:24.779Z,1520512884.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:25.181Z,1520512885.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:25.571Z,1520512885.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:25.973Z,1520512885.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:26.379Z,1520512886.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:26.777Z,1520512886.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:27.184Z,1520512887.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:27.570Z,1520512887.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:27.975Z,1520512887.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:28.390Z,1520512888.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:28.783Z,1520512888.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:29.189Z,1520512889.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:29.572Z,1520512889.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:29.972Z,1520512889.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:30.388Z,1520512890.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:30.785Z,1520512890.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:31.182Z,1520512891.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:31.568Z,1520512891.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:31.969Z,1520512891.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:32.382Z,1520512892.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:32.776Z,1520512892.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:33.177Z,1520512893.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:33.570Z,1520512893.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:33.978Z,1520512893.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:34.380Z,1520512894.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:34.785Z,1520512894.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:35.180Z,1520512895.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:35.572Z,1520512895.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:35.969Z,1520512895.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:36.377Z,1520512896.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:36.772Z,1520512896.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:37.198Z,1520512897.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:37.571Z,1520512897.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:37.975Z,1520512897.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:38.380Z,1520512898.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:38.775Z,1520512898.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:39.176Z,1520512899.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:39.574Z,1520512899.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:39.978Z,1520512899.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:40.380Z,1520512900.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:40.785Z,1520512900.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:41.176Z,1520512901.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:41.577Z,1520512901.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:41.969Z,1520512901.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:42.376Z,1520512902.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:42.780Z,1520512902.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:43.186Z,1520512903.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:43.573Z,1520512903.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:43.967Z,1520512903.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:44.390Z,1520512904.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:44.775Z,1520512904.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:45.176Z,1520512905.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:45.570Z,1520512905.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:45.978Z,1520512905.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:46.386Z,1520512906.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:46.780Z,1520512906.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:46.793Z,1520512906.793 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T12:41:49.875Z,1520512909.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:50.015Z,1520512910.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:50.370Z,1520512910.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:50.743Z,1520512910.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:51.155Z,1520512911.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:51.574Z,1520512911.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:51.956Z,1520512911.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:52.348Z,1520512912.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:52.744Z,1520512912.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:53.148Z,1520512913.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:53.549Z,1520512913.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:53.947Z,1520512913.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:54.376Z,1520512914.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:54.745Z,1520512914.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:55.173Z,1520512915.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:55.544Z,1520512915.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:55.945Z,1520512915.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:56.375Z,1520512916.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:56.777Z,1520512916.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:57.151Z,1520512917.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:57.548Z,1520512917.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:57.946Z,1520512917.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:58.356Z,1520512918.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:58.756Z,1520512918.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:59.159Z,1520512919.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:59.548Z,1520512919.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:41:59.947Z,1520512919.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:00.360Z,1520512920.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:00.748Z,1520512920.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:01.160Z,1520512921.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:01.550Z,1520512921.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:01.945Z,1520512921.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:02.358Z,1520512922.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:02.756Z,1520512922.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:03.153Z,1520512923.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:03.549Z,1520512923.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:03.949Z,1520512923.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:04.353Z,1520512924.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:04.752Z,1520512924.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:05.152Z,1520512925.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:05.549Z,1520512925.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:05.950Z,1520512925.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:06.352Z,1520512926.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:06.759Z,1520512926.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:07.153Z,1520512927.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:07.550Z,1520512927.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:07.944Z,1520512927.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:08.352Z,1520512928.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:08.752Z,1520512928.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:09.153Z,1520512929.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:09.553Z,1520512929.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:09.950Z,1520512929.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:10.363Z,1520512930.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:10.756Z,1520512930.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:11.162Z,1520512931.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:11.551Z,1520512931.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:11.954Z,1520512931.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:12.357Z,1520512932.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:12.755Z,1520512932.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:13.156Z,1520512933.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:13.551Z,1520512933.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:13.945Z,1520512933.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:14.355Z,1520512934.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:14.756Z,1520512934.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:15.156Z,1520512935.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:15.551Z,1520512935.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:15.951Z,1520512935.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:16.355Z,1520512936.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:16.755Z,1520512936.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:17.156Z,1520512937.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:17.551Z,1520512937.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:17.948Z,1520512937.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:18.356Z,1520512938.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:18.755Z,1520512938.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:19.155Z,1520512939.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:19.557Z,1520512939.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:19.951Z,1520512939.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:20.356Z,1520512940.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:20.760Z,1520512940.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:21.166Z,1520512941.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:21.554Z,1520512941.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:21.947Z,1520512941.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:22.360Z,1520512942.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:22.766Z,1520512942.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:23.160Z,1520512943.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:23.551Z,1520512943.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:23.947Z,1520512943.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:24.360Z,1520512944.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:24.761Z,1520512944.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:25.160Z,1520512945.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:25.570Z,1520512945.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:25.947Z,1520512945.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:26.356Z,1520512946.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:26.773Z,1520512946.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:27.152Z,1520512947.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:27.555Z,1520512947.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:27.950Z,1520512947.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:28.361Z,1520512948.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:28.760Z,1520512948.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:29.166Z,1520512949.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:29.545Z,1520512949.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:29.958Z,1520512949.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:30.374Z,1520512950.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:30.759Z,1520512950.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:31.159Z,1520512951.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:31.561Z,1520512951.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:31.957Z,1520512951.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:32.363Z,1520512952.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:32.770Z,1520512952.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:33.163Z,1520512953.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:33.555Z,1520512953.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:33.959Z,1520512953.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:34.370Z,1520512954.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:34.769Z,1520512954.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:35.170Z,1520512955.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:35.542Z,1520512955.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:35.943Z,1520512955.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:36.373Z,1520512956.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:36.764Z,1520512956.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:37.164Z,1520512957.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:37.543Z,1520512957.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:37.946Z,1520512957.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:38.373Z,1520512958.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:38.782Z,1520512958.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:39.170Z,1520512959.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:39.547Z,1520512959.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:39.948Z,1520512959.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:40.373Z,1520512960.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:40.752Z,1520512960.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:41.180Z,1520512961.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:41.551Z,1520512961.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:41.951Z,1520512961.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:42.361Z,1520512962.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:42.766Z,1520512962.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:43.160Z,1520512963.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:43.555Z,1520512963.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:43.953Z,1520512963.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:44.371Z,1520512964.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:44.765Z,1520512964.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:45.161Z,1520512965.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:45.553Z,1520512965.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:45.951Z,1520512965.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:46.374Z,1520512966.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:46.775Z,1520512966.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:47.151Z,1520512967.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:50.519Z,1520512970.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:50.646Z,1520512970.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:51.026Z,1520512971.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:51.431Z,1520512971.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:51.825Z,1520512971.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:52.206Z,1520512972.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:52.602Z,1520512972.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:53.006Z,1520512973.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:53.434Z,1520512973.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:53.808Z,1520512973.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:54.228Z,1520512974.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:54.604Z,1520512974.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:55.000Z,1520512975.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:55.400Z,1520512975.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:55.830Z,1520512975.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:56.201Z,1520512976.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:56.623Z,1520512976.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:57.029Z,1520512977.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:57.405Z,1520512977.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:57.810Z,1520512977.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:58.210Z,1520512978.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:58.605Z,1520512978.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:59.003Z,1520512979.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:59.435Z,1520512979.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:42:59.804Z,1520512979.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:00.233Z,1520512980.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:00.608Z,1520512980.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:01.005Z,1520512981.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:01.402Z,1520512981.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:01.807Z,1520512981.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:02.199Z,1520512982.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:02.608Z,1520512982.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:03.012Z,1520512983.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:03.408Z,1520512983.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:03.804Z,1520512983.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:04.207Z,1520512984.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:04.607Z,1520512984.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:05.010Z,1520512985.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:05.413Z,1520512985.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:05.812Z,1520512985.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:06.210Z,1520512986.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:06.607Z,1520512986.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:07.006Z,1520512987.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:07.408Z,1520512987.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:07.805Z,1520512987.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:08.207Z,1520512988.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:08.609Z,1520512988.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:09.013Z,1520512989.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:09.409Z,1520512989.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:09.814Z,1520512989.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:10.209Z,1520512990.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:10.601Z,1520512990.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:11.011Z,1520512991.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:11.418Z,1520512991.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:11.813Z,1520512991.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:12.219Z,1520512992.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:12.606Z,1520512992.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:13.009Z,1520512993.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:13.411Z,1520512993.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:13.809Z,1520512993.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:14.207Z,1520512994.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:14.613Z,1520512994.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:15.017Z,1520512995.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:15.410Z,1520512995.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:15.809Z,1520512995.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:16.201Z,1520512996.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:16.607Z,1520512996.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:17.009Z,1520512997.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:17.412Z,1520512997.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:17.826Z,1520512997.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:18.215Z,1520512998.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:18.606Z,1520512998.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:19.014Z,1520512999.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:19.409Z,1520512999.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:19.806Z,1520512999.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:20.247Z,1520513000.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:20.616Z,1520513000.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:21.012Z,1520513001.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:21.416Z,1520513001.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:21.804Z,1520513001.804 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:21.804Z,1520513001.804 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100
2018-03-08T12:43:21.804Z,1520513001.804 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T12:43:21.806Z,1520513001.806 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:21.806Z,1520513001.806 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100
2018-03-08T12:43:21.806Z,1520513001.806 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T12:43:21.808Z,1520513001.808 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:21.808Z,1520513001.808 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 100
2018-03-08T12:43:21.808Z,1520513001.808 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T12:43:21.820Z,1520513001.820 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T12:43:21.821Z,1520513001.821 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T12:43:21.821Z,1520513001.821 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T12:43:22.224Z,1520513002.224 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T12:43:22.224Z,1520513002.224 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100
2018-03-08T12:43:22.224Z,1520513002.224 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T12:43:22.224Z,1520513002.224 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100
2018-03-08T12:43:22.225Z,1520513002.225 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T12:43:22.225Z,1520513002.225 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 100
2018-03-08T12:43:22.608Z,1520513002.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T12:43:22.608Z,1520513002.608 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:43:22.609Z,1520513002.609 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:43:22.609Z,1520513002.609 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T12:43:22.610Z,1520513002.610 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:43:22.610Z,1520513002.610 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:43:22.610Z,1520513002.610 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T12:43:22.611Z,1520513002.611 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:43:22.611Z,1520513002.611 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:43:23.012Z,1520513003.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T12:43:23.013Z,1520513003.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:23.417Z,1520513003.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T12:43:23.418Z,1520513003.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:23.821Z,1520513003.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T12:43:23.822Z,1520513003.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:24.218Z,1520513004.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T12:43:24.219Z,1520513004.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:24.615Z,1520513004.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T12:43:24.616Z,1520513004.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:25.012Z,1520513005.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T12:43:25.013Z,1520513005.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:25.413Z,1520513005.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T12:43:25.413Z,1520513005.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:25.814Z,1520513005.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T12:43:25.815Z,1520513005.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:26.212Z,1520513006.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T12:43:26.213Z,1520513006.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:26.621Z,1520513006.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T12:43:26.622Z,1520513006.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:27.020Z,1520513007.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T12:43:27.021Z,1520513007.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:27.418Z,1520513007.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T12:43:27.419Z,1520513007.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:27.812Z,1520513007.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T12:43:27.813Z,1520513007.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:28.189Z,1520513008.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T12:43:28.190Z,1520513008.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:28.618Z,1520513008.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T12:43:28.619Z,1520513008.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:29.012Z,1520513009.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T12:43:29.013Z,1520513009.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:29.417Z,1520513009.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T12:43:29.418Z,1520513009.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:29.818Z,1520513009.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T12:43:29.819Z,1520513009.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:30.221Z,1520513010.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T12:43:30.222Z,1520513010.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:30.591Z,1520513010.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T12:43:30.592Z,1520513010.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:31.016Z,1520513011.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T12:43:31.017Z,1520513011.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:31.395Z,1520513011.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T12:43:31.396Z,1520513011.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:31.802Z,1520513011.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T12:43:31.802Z,1520513011.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:32.202Z,1520513012.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T12:43:32.203Z,1520513012.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:32.623Z,1520513012.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T12:43:32.624Z,1520513012.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:33.028Z,1520513013.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T12:43:33.029Z,1520513013.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:33.422Z,1520513013.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T12:43:33.423Z,1520513013.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:33.803Z,1520513013.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T12:43:33.804Z,1520513013.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:34.203Z,1520513014.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T12:43:34.204Z,1520513014.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:34.600Z,1520513014.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T12:43:34.601Z,1520513014.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:35.001Z,1520513015.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T12:43:35.002Z,1520513015.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:35.405Z,1520513015.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T12:43:35.406Z,1520513015.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:35.820Z,1520513015.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T12:43:35.821Z,1520513015.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:36.230Z,1520513016.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T12:43:36.231Z,1520513016.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:36.602Z,1520513016.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T12:43:36.603Z,1520513016.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:37.003Z,1520513017.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T12:43:37.004Z,1520513017.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:37.402Z,1520513017.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T12:43:37.403Z,1520513017.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:37.803Z,1520513017.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T12:43:37.804Z,1520513017.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:38.204Z,1520513018.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T12:43:38.205Z,1520513018.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:38.612Z,1520513018.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T12:43:38.633Z,1520513018.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:39.015Z,1520513019.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T12:43:39.016Z,1520513019.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:39.404Z,1520513019.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T12:43:39.405Z,1520513019.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:39.804Z,1520513019.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T12:43:39.809Z,1520513019.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:40.206Z,1520513020.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T12:43:40.207Z,1520513020.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:40.603Z,1520513020.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T12:43:40.604Z,1520513020.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:41.006Z,1520513021.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T12:43:41.007Z,1520513021.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:41.412Z,1520513021.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T12:43:41.413Z,1520513021.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:41.808Z,1520513021.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:42.208Z,1520513022.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:42.606Z,1520513022.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:43.008Z,1520513023.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:43.411Z,1520513023.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:43.808Z,1520513023.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:44.206Z,1520513024.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:44.635Z,1520513024.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:45.010Z,1520513025.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:45.413Z,1520513025.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:45.807Z,1520513025.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:46.210Z,1520513026.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:46.608Z,1520513026.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:47.006Z,1520513027.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:47.413Z,1520513027.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:50.512Z,1520513030.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:50.662Z,1520513030.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:51.011Z,1520513031.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:51.409Z,1520513031.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:51.811Z,1520513031.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:52.213Z,1520513032.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:52.621Z,1520513032.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:53.016Z,1520513033.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:53.422Z,1520513033.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:53.812Z,1520513033.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:54.210Z,1520513034.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:54.607Z,1520513034.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:55.018Z,1520513035.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:55.416Z,1520513035.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:55.822Z,1520513035.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:56.218Z,1520513036.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:56.611Z,1520513036.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:57.008Z,1520513037.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:57.405Z,1520513037.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:57.812Z,1520513037.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:58.233Z,1520513038.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:58.613Z,1520513038.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:59.015Z,1520513039.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:59.427Z,1520513039.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:43:59.815Z,1520513039.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:00.218Z,1520513040.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:00.609Z,1520513040.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:01.012Z,1520513041.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:01.421Z,1520513041.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:01.826Z,1520513041.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:02.224Z,1520513042.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:02.611Z,1520513042.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:03.007Z,1520513043.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:03.415Z,1520513043.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:03.812Z,1520513043.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:04.213Z,1520513044.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:04.619Z,1520513044.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:05.020Z,1520513045.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:05.422Z,1520513045.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:05.819Z,1520513045.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:06.222Z,1520513046.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:06.621Z,1520513046.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:07.018Z,1520513047.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:07.422Z,1520513047.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:07.834Z,1520513047.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:08.227Z,1520513048.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:08.625Z,1520513048.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:09.003Z,1520513049.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:09.398Z,1520513049.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:09.805Z,1520513049.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:10.231Z,1520513050.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:10.605Z,1520513050.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:11.029Z,1520513051.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:11.434Z,1520513051.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:11.807Z,1520513051.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:12.207Z,1520513052.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:12.605Z,1520513052.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:12.999Z,1520513052.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:13.435Z,1520513053.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:13.829Z,1520513053.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:14.208Z,1520513054.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:14.608Z,1520513054.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:15.007Z,1520513055.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:15.408Z,1520513055.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:15.809Z,1520513055.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:16.206Z,1520513056.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:16.609Z,1520513056.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:17.036Z,1520513057.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:17.436Z,1520513057.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:17.802Z,1520513057.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:18.205Z,1520513058.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:18.609Z,1520513058.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:19.002Z,1520513059.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:19.408Z,1520513059.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:19.836Z,1520513059.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:20.236Z,1520513060.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:20.609Z,1520513060.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:21.007Z,1520513061.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:21.409Z,1520513061.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:21.807Z,1520513061.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:22.208Z,1520513062.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:22.637Z,1520513062.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:23.012Z,1520513063.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:23.436Z,1520513063.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:23.804Z,1520513063.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:24.216Z,1520513064.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:24.609Z,1520513064.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:25.008Z,1520513065.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:25.441Z,1520513065.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:25.813Z,1520513065.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:26.241Z,1520513066.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:26.609Z,1520513066.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:27.011Z,1520513067.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:27.410Z,1520513067.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:27.802Z,1520513067.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:28.209Z,1520513068.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:28.612Z,1520513068.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:29.011Z,1520513069.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:29.412Z,1520513069.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:29.809Z,1520513069.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:30.213Z,1520513070.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:30.612Z,1520513070.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:31.010Z,1520513071.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:31.416Z,1520513071.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:31.826Z,1520513071.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:32.227Z,1520513072.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:32.610Z,1520513072.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:33.010Z,1520513073.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:33.414Z,1520513073.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:33.811Z,1520513073.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:34.210Z,1520513074.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:34.617Z,1520513074.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:35.024Z,1520513075.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:35.421Z,1520513075.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:35.813Z,1520513075.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:36.211Z,1520513076.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:36.613Z,1520513076.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:37.015Z,1520513077.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:37.416Z,1520513077.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:37.825Z,1520513077.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:38.215Z,1520513078.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:38.609Z,1520513078.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:39.018Z,1520513079.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:39.424Z,1520513079.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:39.803Z,1520513079.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:40.199Z,1520513080.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:40.630Z,1520513080.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:41.027Z,1520513081.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:41.418Z,1520513081.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:41.811Z,1520513081.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:42.210Z,1520513082.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:42.612Z,1520513082.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:43.014Z,1520513083.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:43.415Z,1520513083.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:43.816Z,1520513083.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:44.216Z,1520513084.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:44.611Z,1520513084.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:45.011Z,1520513085.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:45.406Z,1520513085.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:45.802Z,1520513085.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:46.218Z,1520513086.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:46.221Z,1520513086.221 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T12:39:45.0Z
2018-03-08T12:44:46.221Z,1520513086.221 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T12:44:46.221Z,1520513086.221 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T12:44:46.617Z,1520513086.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:47.106Z,1520513087.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:47.421Z,1520513087.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:50.507Z,1520513090.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:50.645Z,1520513090.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:50.945Z,1520513090.945 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0116.lzma
2018-03-08T12:44:51.014Z,1520513091.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:51.403Z,1520513091.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:51.740Z,1520513091.740 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0116.lzma.bak
2018-03-08T12:44:51.740Z,1520513091.740 [DataOverHttps](INFO): SBD MOMSN=7985759
2018-03-08T12:44:51.810Z,1520513091.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:52.363Z,1520513092.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:52.583Z,1520513092.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:55.725Z,1520513095.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:55.878Z,1520513095.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:56.229Z,1520513096.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:56.634Z,1520513096.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:57.019Z,1520513097.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:57.416Z,1520513097.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:44:57.822Z,1520513097.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:00.915Z,1520513100.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:01.063Z,1520513101.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:01.349Z,1520513101.349 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180308T074127/Express0117.lzma
2018-03-08T12:45:01.412Z,1520513101.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:01.813Z,1520513101.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:02.144Z,1520513102.144 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0117.lzma.bak
2018-03-08T12:45:02.144Z,1520513102.144 [DataOverHttps](INFO): SBD MOMSN=7985761
2018-03-08T12:45:02.199Z,1520513102.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:02.778Z,1520513102.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:02.781Z,1520513102.781 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T12:45:02.781Z,1520513102.781 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T12:45:02.781Z,1520513102.781 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T12:45:02.991Z,1520513102.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:06.171Z,1520513106.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:06.316Z,1520513106.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:06.669Z,1520513106.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:07.074Z,1520513107.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:07.447Z,1520513107.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:07.854Z,1520513107.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:08.247Z,1520513108.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:08.677Z,1520513108.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:09.058Z,1520513109.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:09.464Z,1520513109.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:09.845Z,1520513109.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:10.249Z,1520513110.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:10.651Z,1520513110.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:11.054Z,1520513111.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:11.464Z,1520513111.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:11.859Z,1520513111.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:12.267Z,1520513112.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:12.653Z,1520513112.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:13.053Z,1520513113.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:13.453Z,1520513113.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:13.859Z,1520513113.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:14.253Z,1520513114.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:14.656Z,1520513114.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:15.056Z,1520513115.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:15.462Z,1520513115.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:15.845Z,1520513115.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:16.250Z,1520513116.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:16.657Z,1520513116.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:17.047Z,1520513117.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:17.455Z,1520513117.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:17.860Z,1520513117.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:18.257Z,1520513118.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:18.654Z,1520513118.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:19.053Z,1520513119.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:19.444Z,1520513119.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:19.854Z,1520513119.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:20.255Z,1520513120.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:20.656Z,1520513120.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:21.061Z,1520513121.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:21.558Z,1520513121.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:21.851Z,1520513121.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:22.251Z,1520513122.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:22.642Z,1520513122.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:23.042Z,1520513123.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:23.453Z,1520513123.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:23.860Z,1520513123.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:24.318Z,1520513124.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:24.651Z,1520513124.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:25.043Z,1520513125.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:25.449Z,1520513125.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:25.851Z,1520513125.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:26.251Z,1520513126.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:26.649Z,1520513126.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:27.073Z,1520513127.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:27.477Z,1520513127.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:27.847Z,1520513127.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:28.251Z,1520513128.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:28.647Z,1520513128.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:29.047Z,1520513129.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:29.460Z,1520513129.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:29.883Z,1520513129.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:30.281Z,1520513130.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:30.650Z,1520513130.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:31.052Z,1520513131.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:31.455Z,1520513131.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:31.858Z,1520513131.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:32.255Z,1520513132.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:32.662Z,1520513132.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:33.082Z,1520513133.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:33.459Z,1520513133.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:33.845Z,1520513133.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:34.250Z,1520513134.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:34.656Z,1520513134.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:35.053Z,1520513135.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:35.460Z,1520513135.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:35.861Z,1520513135.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:36.258Z,1520513136.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:36.653Z,1520513136.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:37.051Z,1520513137.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:37.447Z,1520513137.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:37.855Z,1520513137.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:38.252Z,1520513138.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:38.657Z,1520513138.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:39.061Z,1520513139.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:39.461Z,1520513139.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:39.854Z,1520513139.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:40.254Z,1520513140.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:40.656Z,1520513140.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:41.053Z,1520513141.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:41.455Z,1520513141.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:41.861Z,1520513141.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:42.257Z,1520513142.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:42.655Z,1520513142.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:43.055Z,1520513143.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:43.447Z,1520513143.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:43.855Z,1520513143.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:44.254Z,1520513144.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:44.662Z,1520513144.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:45.062Z,1520513145.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:45.485Z,1520513145.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:45.847Z,1520513145.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:46.251Z,1520513146.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:46.662Z,1520513146.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:47.054Z,1520513147.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:47.458Z,1520513147.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:47.861Z,1520513147.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:48.257Z,1520513148.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:48.653Z,1520513148.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:49.054Z,1520513149.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:49.454Z,1520513149.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:49.852Z,1520513149.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:50.251Z,1520513150.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:50.663Z,1520513150.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:51.062Z,1520513151.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:51.459Z,1520513151.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:51.854Z,1520513151.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:52.254Z,1520513152.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:52.655Z,1520513152.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:53.059Z,1520513153.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:53.466Z,1520513153.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:53.859Z,1520513153.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:54.260Z,1520513154.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:54.654Z,1520513154.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:55.052Z,1520513155.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:55.454Z,1520513155.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:55.850Z,1520513155.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:56.250Z,1520513156.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:56.666Z,1520513156.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:57.066Z,1520513157.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:57.460Z,1520513157.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:57.858Z,1520513157.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:58.252Z,1520513158.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:58.651Z,1520513158.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:59.054Z,1520513159.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:59.466Z,1520513159.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:45:59.860Z,1520513159.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:00.260Z,1520513160.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:00.650Z,1520513160.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:01.050Z,1520513161.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:01.458Z,1520513161.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:01.862Z,1520513161.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:02.254Z,1520513162.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:02.667Z,1520513162.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:03.060Z,1520513163.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:03.466Z,1520513163.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:06.562Z,1520513166.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:06.698Z,1520513166.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:07.063Z,1520513167.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:07.463Z,1520513167.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:07.863Z,1520513167.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:08.252Z,1520513168.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:08.657Z,1520513168.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:09.051Z,1520513169.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:09.460Z,1520513169.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:09.870Z,1520513169.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:10.263Z,1520513170.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:10.650Z,1520513170.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:11.062Z,1520513171.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:11.453Z,1520513171.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:11.858Z,1520513171.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:12.255Z,1520513172.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:12.664Z,1520513172.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:13.063Z,1520513173.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:13.470Z,1520513173.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:13.852Z,1520513173.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:14.258Z,1520513174.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:14.662Z,1520513174.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:15.062Z,1520513175.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:15.464Z,1520513175.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:15.865Z,1520513175.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:16.270Z,1520513176.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:16.654Z,1520513176.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:17.056Z,1520513177.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:17.451Z,1520513177.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:17.849Z,1520513177.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:18.263Z,1520513178.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:18.663Z,1520513178.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:19.063Z,1520513179.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:19.464Z,1520513179.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:19.854Z,1520513179.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:20.250Z,1520513180.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:20.662Z,1520513180.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:21.062Z,1520513181.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:21.463Z,1520513181.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:21.871Z,1520513181.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:22.264Z,1520513182.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:22.655Z,1520513182.655 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:22.655Z,1520513182.655 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 101
2018-03-08T12:46:22.655Z,1520513182.655 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T12:46:22.657Z,1520513182.657 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:22.657Z,1520513182.657 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 101
2018-03-08T12:46:22.657Z,1520513182.657 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T12:46:22.658Z,1520513182.658 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:22.659Z,1520513182.659 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 101
2018-03-08T12:46:22.659Z,1520513182.659 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T12:46:22.670Z,1520513182.670 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T12:46:22.670Z,1520513182.670 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T12:46:22.670Z,1520513182.670 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T12:46:23.073Z,1520513183.073 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T12:46:23.073Z,1520513183.073 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 101
2018-03-08T12:46:23.073Z,1520513183.073 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T12:46:23.074Z,1520513183.074 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 101
2018-03-08T12:46:23.074Z,1520513183.074 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T12:46:23.074Z,1520513183.074 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 101
2018-03-08T12:46:23.459Z,1520513183.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T12:46:23.459Z,1520513183.459 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:46:23.460Z,1520513183.460 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:46:23.460Z,1520513183.460 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T12:46:23.461Z,1520513183.461 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:46:23.461Z,1520513183.461 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:46:23.461Z,1520513183.461 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T12:46:23.462Z,1520513183.462 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:46:23.462Z,1520513183.462 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:46:23.858Z,1520513183.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T12:46:23.859Z,1520513183.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:24.262Z,1520513184.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T12:46:24.263Z,1520513184.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:24.664Z,1520513184.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T12:46:24.665Z,1520513184.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:25.076Z,1520513185.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T12:46:25.077Z,1520513185.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:25.459Z,1520513185.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T12:46:25.460Z,1520513185.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:25.861Z,1520513185.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T12:46:25.862Z,1520513185.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:26.261Z,1520513186.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T12:46:26.262Z,1520513186.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:26.657Z,1520513186.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T12:46:26.658Z,1520513186.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:27.058Z,1520513187.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T12:46:27.059Z,1520513187.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:27.471Z,1520513187.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T12:46:27.472Z,1520513187.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:27.864Z,1520513187.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T12:46:27.865Z,1520513187.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:28.270Z,1520513188.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T12:46:28.271Z,1520513188.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:28.662Z,1520513188.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T12:46:28.663Z,1520513188.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:29.061Z,1520513189.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T12:46:29.062Z,1520513189.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:29.461Z,1520513189.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T12:46:29.462Z,1520513189.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:29.862Z,1520513189.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T12:46:29.862Z,1520513189.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:30.239Z,1520513190.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T12:46:30.240Z,1520513190.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:30.674Z,1520513190.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T12:46:30.675Z,1520513190.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:31.078Z,1520513191.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T12:46:31.079Z,1520513191.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:31.464Z,1520513191.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T12:46:31.469Z,1520513191.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:31.874Z,1520513191.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T12:46:31.875Z,1520513191.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:32.245Z,1520513192.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T12:46:32.246Z,1520513192.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:32.643Z,1520513192.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T12:46:32.644Z,1520513192.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:33.070Z,1520513193.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T12:46:33.071Z,1520513193.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:33.477Z,1520513193.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T12:46:33.478Z,1520513193.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:33.855Z,1520513193.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T12:46:33.865Z,1520513193.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:34.278Z,1520513194.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T12:46:34.279Z,1520513194.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:34.650Z,1520513194.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T12:46:34.651Z,1520513194.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:35.046Z,1520513195.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T12:46:35.047Z,1520513195.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:35.450Z,1520513195.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T12:46:35.451Z,1520513195.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:35.850Z,1520513195.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T12:46:35.851Z,1520513195.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:36.247Z,1520513196.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T12:46:36.248Z,1520513196.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:36.679Z,1520513196.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T12:46:36.680Z,1520513196.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:37.079Z,1520513197.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T12:46:37.080Z,1520513197.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:37.449Z,1520513197.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T12:46:37.450Z,1520513197.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:37.849Z,1520513197.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T12:46:37.850Z,1520513197.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:38.250Z,1520513198.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T12:46:38.251Z,1520513198.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:38.647Z,1520513198.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T12:46:38.648Z,1520513198.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:39.048Z,1520513199.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T12:46:39.049Z,1520513199.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:39.479Z,1520513199.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T12:46:39.480Z,1520513199.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:39.848Z,1520513199.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T12:46:39.849Z,1520513199.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:40.278Z,1520513200.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T12:46:40.279Z,1520513200.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:40.648Z,1520513200.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T12:46:40.649Z,1520513200.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:41.050Z,1520513201.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T12:46:41.051Z,1520513201.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:41.450Z,1520513201.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T12:46:41.451Z,1520513201.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:41.850Z,1520513201.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T12:46:41.851Z,1520513201.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:42.246Z,1520513202.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T12:46:42.247Z,1520513202.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:42.660Z,1520513202.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:43.063Z,1520513203.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:43.451Z,1520513203.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:43.852Z,1520513203.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:44.251Z,1520513204.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:44.651Z,1520513204.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:45.051Z,1520513205.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:45.452Z,1520513205.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:45.851Z,1520513205.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:46.256Z,1520513206.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:46.650Z,1520513206.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:47.051Z,1520513207.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:47.449Z,1520513207.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:47.849Z,1520513207.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:48.251Z,1520513208.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:48.664Z,1520513208.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:49.060Z,1520513209.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:49.456Z,1520513209.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:49.851Z,1520513209.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:50.252Z,1520513210.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:50.655Z,1520513210.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:51.054Z,1520513211.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:51.456Z,1520513211.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:51.857Z,1520513211.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:52.260Z,1520513212.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:52.653Z,1520513212.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:53.053Z,1520513213.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:53.455Z,1520513213.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:53.854Z,1520513213.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:54.254Z,1520513214.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:54.657Z,1520513214.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:55.060Z,1520513215.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:55.456Z,1520513215.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:55.853Z,1520513215.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:56.249Z,1520513216.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:56.655Z,1520513216.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:57.049Z,1520513217.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:57.455Z,1520513217.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:57.855Z,1520513217.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:58.255Z,1520513218.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:58.650Z,1520513218.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:59.054Z,1520513219.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:59.453Z,1520513219.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:46:59.853Z,1520513219.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:00.255Z,1520513220.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:00.656Z,1520513220.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:01.056Z,1520513221.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:01.458Z,1520513221.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:01.855Z,1520513221.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:02.250Z,1520513222.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:02.653Z,1520513222.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:03.056Z,1520513223.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:03.456Z,1520513223.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:03.857Z,1520513223.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:06.987Z,1520513226.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:07.110Z,1520513227.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:07.471Z,1520513227.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:07.870Z,1520513227.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:08.273Z,1520513228.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:08.694Z,1520513228.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:09.096Z,1520513229.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:09.491Z,1520513229.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:09.874Z,1520513229.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:10.286Z,1520513230.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:10.667Z,1520513230.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:11.071Z,1520513231.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:11.493Z,1520513231.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:11.892Z,1520513231.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:12.291Z,1520513232.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:12.666Z,1520513232.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:13.071Z,1520513233.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:13.495Z,1520513233.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:13.864Z,1520513233.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:14.268Z,1520513234.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:14.694Z,1520513234.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:15.095Z,1520513235.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:15.491Z,1520513235.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:15.869Z,1520513235.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:16.265Z,1520513236.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:16.671Z,1520513236.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:17.071Z,1520513237.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:17.468Z,1520513237.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:17.891Z,1520513237.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:18.291Z,1520513238.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:18.665Z,1520513238.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:19.070Z,1520513239.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:19.466Z,1520513239.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:19.868Z,1520513239.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:20.270Z,1520513240.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:20.692Z,1520513240.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:21.095Z,1520513241.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:21.476Z,1520513241.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:21.867Z,1520513241.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:22.266Z,1520513242.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:22.671Z,1520513242.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:23.070Z,1520513243.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:23.468Z,1520513243.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:23.889Z,1520513243.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:24.297Z,1520513244.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:24.665Z,1520513244.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:25.069Z,1520513245.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:25.470Z,1520513245.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:25.902Z,1520513245.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:26.298Z,1520513246.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:26.680Z,1520513246.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:27.099Z,1520513247.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:27.480Z,1520513247.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:27.870Z,1520513247.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:28.271Z,1520513248.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:28.679Z,1520513248.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:29.079Z,1520513249.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:29.472Z,1520513249.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:29.876Z,1520513249.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:30.283Z,1520513250.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:30.663Z,1520513250.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:31.070Z,1520513251.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:31.472Z,1520513251.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:31.869Z,1520513251.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:32.273Z,1520513252.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:32.702Z,1520513252.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:33.084Z,1520513253.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:33.478Z,1520513253.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:33.871Z,1520513253.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:34.275Z,1520513254.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:34.679Z,1520513254.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:35.074Z,1520513255.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:35.477Z,1520513255.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:35.931Z,1520513255.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:36.281Z,1520513256.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:36.689Z,1520513256.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:37.085Z,1520513257.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:37.487Z,1520513257.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:37.889Z,1520513257.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:38.288Z,1520513258.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:38.687Z,1520513258.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:39.091Z,1520513259.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:39.488Z,1520513259.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:39.867Z,1520513259.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:40.294Z,1520513260.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:40.668Z,1520513260.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:41.091Z,1520513261.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:41.489Z,1520513261.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:41.887Z,1520513261.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:42.298Z,1520513262.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:42.670Z,1520513262.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:43.071Z,1520513263.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:43.494Z,1520513263.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:43.869Z,1520513263.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:44.271Z,1520513264.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:44.699Z,1520513264.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:45.101Z,1520513265.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:45.477Z,1520513265.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:45.871Z,1520513265.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:46.274Z,1520513266.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:46.660Z,1520513266.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:47.063Z,1520513267.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:47.472Z,1520513267.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:47.880Z,1520513267.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:48.307Z,1520513268.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:48.670Z,1520513268.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:49.065Z,1520513269.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:49.466Z,1520513269.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:49.867Z,1520513269.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:50.335Z,1520513270.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:50.676Z,1520513270.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:51.080Z,1520513271.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:51.472Z,1520513271.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:51.863Z,1520513271.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:52.266Z,1520513272.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:52.675Z,1520513272.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:53.095Z,1520513273.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:53.483Z,1520513273.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:53.887Z,1520513273.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:54.293Z,1520513274.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:54.687Z,1520513274.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:55.065Z,1520513275.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:55.470Z,1520513275.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:55.871Z,1520513275.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:56.270Z,1520513276.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:56.700Z,1520513276.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:57.099Z,1520513277.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:57.479Z,1520513277.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:57.871Z,1520513277.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:58.269Z,1520513278.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:58.671Z,1520513278.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:59.070Z,1520513279.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:59.500Z,1520513279.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:47:59.876Z,1520513279.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:00.300Z,1520513280.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:00.669Z,1520513280.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:01.065Z,1520513281.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:01.472Z,1520513281.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:01.878Z,1520513281.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:02.268Z,1520513282.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:02.676Z,1520513282.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:03.084Z,1520513283.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:03.476Z,1520513283.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:03.872Z,1520513283.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:06.973Z,1520513286.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:07.110Z,1520513287.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:07.463Z,1520513287.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:07.858Z,1520513287.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:08.259Z,1520513288.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:08.655Z,1520513288.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:09.057Z,1520513289.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:09.435Z,1520513289.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:09.837Z,1520513289.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:10.238Z,1520513290.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:10.652Z,1520513290.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:11.064Z,1520513291.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:11.464Z,1520513291.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:11.837Z,1520513291.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:12.239Z,1520513292.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:12.638Z,1520513292.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:13.038Z,1520513293.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:13.463Z,1520513293.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:13.856Z,1520513293.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:14.268Z,1520513294.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:14.646Z,1520513294.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:15.042Z,1520513295.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:15.437Z,1520513295.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:15.847Z,1520513295.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:16.238Z,1520513296.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:16.641Z,1520513296.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:17.065Z,1520513297.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:17.466Z,1520513297.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:17.839Z,1520513297.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:18.244Z,1520513298.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:18.645Z,1520513298.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:19.044Z,1520513299.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:19.445Z,1520513299.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:19.848Z,1520513299.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:20.250Z,1520513300.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:20.645Z,1520513300.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:21.039Z,1520513301.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:21.441Z,1520513301.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:21.844Z,1520513301.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:22.242Z,1520513302.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:22.643Z,1520513302.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:23.048Z,1520513303.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:23.478Z,1520513303.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:23.835Z,1520513303.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:24.241Z,1520513304.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:24.642Z,1520513304.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:25.043Z,1520513305.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:25.473Z,1520513305.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:25.851Z,1520513305.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:26.254Z,1520513306.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:26.645Z,1520513306.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:27.046Z,1520513307.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:27.440Z,1520513307.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:27.845Z,1520513307.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:28.243Z,1520513308.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:28.647Z,1520513308.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:29.052Z,1520513309.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:29.448Z,1520513309.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:29.839Z,1520513309.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:30.243Z,1520513310.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:30.644Z,1520513310.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:31.041Z,1520513311.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:31.447Z,1520513311.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:31.848Z,1520513311.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:32.249Z,1520513312.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:32.642Z,1520513312.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:33.043Z,1520513313.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:33.439Z,1520513313.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:33.842Z,1520513313.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:34.250Z,1520513314.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:34.647Z,1520513314.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:35.049Z,1520513315.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:35.447Z,1520513315.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:35.841Z,1520513315.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:36.242Z,1520513316.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:36.646Z,1520513316.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:37.040Z,1520513317.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:37.448Z,1520513317.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:37.851Z,1520513317.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:38.249Z,1520513318.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:38.650Z,1520513318.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:39.046Z,1520513319.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:39.436Z,1520513319.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:39.843Z,1520513319.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:40.243Z,1520513320.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:40.647Z,1520513320.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:41.052Z,1520513321.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:41.458Z,1520513321.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:41.837Z,1520513321.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:42.242Z,1520513322.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:42.644Z,1520513322.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:43.041Z,1520513323.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:43.454Z,1520513323.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:43.849Z,1520513323.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:44.249Z,1520513324.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:44.647Z,1520513324.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:45.047Z,1520513325.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:45.442Z,1520513325.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:45.844Z,1520513325.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:46.242Z,1520513326.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:46.653Z,1520513326.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:47.052Z,1520513327.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:47.458Z,1520513327.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:47.839Z,1520513327.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:48.251Z,1520513328.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:48.647Z,1520513328.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:49.043Z,1520513329.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:49.452Z,1520513329.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:49.879Z,1520513329.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:50.267Z,1520513330.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:50.635Z,1520513330.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:51.043Z,1520513331.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:51.446Z,1520513331.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:51.839Z,1520513331.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:52.266Z,1520513332.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:52.670Z,1520513332.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:53.052Z,1520513333.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:53.472Z,1520513333.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:53.841Z,1520513333.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:54.246Z,1520513334.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:54.648Z,1520513334.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:55.044Z,1520513335.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:55.448Z,1520513335.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:55.848Z,1520513335.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:56.248Z,1520513336.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:56.644Z,1520513336.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:57.047Z,1520513337.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:57.446Z,1520513337.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:57.846Z,1520513337.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:58.243Z,1520513338.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:58.648Z,1520513338.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:59.058Z,1520513339.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:59.449Z,1520513339.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:48:59.843Z,1520513339.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:00.243Z,1520513340.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:00.685Z,1520513340.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:01.039Z,1520513341.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:01.455Z,1520513341.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:01.852Z,1520513341.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:02.247Z,1520513342.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:02.650Z,1520513342.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:03.045Z,1520513343.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:03.445Z,1520513343.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:03.850Z,1520513343.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:04.245Z,1520513344.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:07.379Z,1520513347.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:07.528Z,1520513347.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:07.879Z,1520513347.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:08.249Z,1520513348.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:08.651Z,1520513348.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:09.051Z,1520513349.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:09.481Z,1520513349.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:09.849Z,1520513349.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:10.280Z,1520513350.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:10.651Z,1520513350.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:11.044Z,1520513351.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:11.454Z,1520513351.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:11.847Z,1520513351.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:12.250Z,1520513352.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:12.679Z,1520513352.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:13.060Z,1520513353.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:13.449Z,1520513353.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:13.851Z,1520513353.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:14.270Z,1520513354.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:14.654Z,1520513354.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:15.047Z,1520513355.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:15.473Z,1520513355.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:15.852Z,1520513355.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:16.278Z,1520513356.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:16.650Z,1520513356.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:17.047Z,1520513357.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:17.451Z,1520513357.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:17.851Z,1520513357.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:18.251Z,1520513358.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:18.678Z,1520513358.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:19.078Z,1520513359.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:19.450Z,1520513359.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:19.851Z,1520513359.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:20.252Z,1520513360.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:20.648Z,1520513360.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:21.051Z,1520513361.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:21.478Z,1520513361.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:21.858Z,1520513361.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:22.280Z,1520513362.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:22.651Z,1520513362.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:23.048Z,1520513363.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:23.449Z,1520513363.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:23.859Z,1520513363.859 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:23.859Z,1520513363.859 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 102
2018-03-08T12:49:23.859Z,1520513363.859 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T12:49:23.865Z,1520513363.865 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:23.865Z,1520513363.865 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 102
2018-03-08T12:49:23.865Z,1520513363.865 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T12:49:23.867Z,1520513363.867 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:23.867Z,1520513363.867 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 102
2018-03-08T12:49:23.867Z,1520513363.867 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T12:49:23.908Z,1520513363.908 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T12:49:23.908Z,1520513363.908 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T12:49:23.908Z,1520513363.908 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T12:49:24.258Z,1520513364.258 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T12:49:24.258Z,1520513364.258 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 102
2018-03-08T12:49:24.258Z,1520513364.258 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T12:49:24.259Z,1520513364.259 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 102
2018-03-08T12:49:24.259Z,1520513364.259 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T12:49:24.259Z,1520513364.259 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 102
2018-03-08T12:49:24.659Z,1520513364.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T12:49:24.660Z,1520513364.660 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:49:24.660Z,1520513364.660 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:49:24.661Z,1520513364.661 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T12:49:24.661Z,1520513364.661 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:49:24.661Z,1520513364.661 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:49:24.662Z,1520513364.662 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T12:49:24.662Z,1520513364.662 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:49:24.662Z,1520513364.662 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:49:25.066Z,1520513365.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T12:49:25.067Z,1520513365.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:25.459Z,1520513365.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T12:49:25.460Z,1520513365.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:25.852Z,1520513365.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T12:49:25.853Z,1520513365.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:26.269Z,1520513366.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T12:49:26.270Z,1520513366.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:26.655Z,1520513366.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T12:49:26.656Z,1520513366.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:27.058Z,1520513367.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T12:49:27.059Z,1520513367.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:27.474Z,1520513367.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T12:49:27.475Z,1520513367.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:27.874Z,1520513367.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T12:49:27.875Z,1520513367.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:28.265Z,1520513368.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T12:49:28.266Z,1520513368.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:28.655Z,1520513368.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T12:49:28.656Z,1520513368.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:29.055Z,1520513369.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T12:49:29.057Z,1520513369.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:29.454Z,1520513369.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T12:49:29.455Z,1520513369.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:29.866Z,1520513369.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T12:49:29.867Z,1520513369.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:30.261Z,1520513370.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T12:49:30.262Z,1520513370.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:30.688Z,1520513370.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T12:49:30.705Z,1520513370.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:31.069Z,1520513371.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T12:49:31.070Z,1520513371.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:31.469Z,1520513371.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T12:49:31.470Z,1520513371.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:31.862Z,1520513371.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T12:49:31.863Z,1520513371.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:32.258Z,1520513372.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T12:49:32.259Z,1520513372.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:32.643Z,1520513372.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T12:49:32.644Z,1520513372.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:33.070Z,1520513373.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T12:49:33.071Z,1520513373.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:33.478Z,1520513373.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T12:49:33.479Z,1520513373.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:33.867Z,1520513373.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T12:49:33.868Z,1520513373.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:34.266Z,1520513374.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T12:49:34.267Z,1520513374.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:34.648Z,1520513374.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T12:49:34.649Z,1520513374.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:35.054Z,1520513375.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T12:49:35.055Z,1520513375.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:35.448Z,1520513375.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T12:49:35.449Z,1520513375.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:35.852Z,1520513375.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T12:49:35.853Z,1520513375.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:36.247Z,1520513376.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T12:49:36.248Z,1520513376.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:36.677Z,1520513376.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T12:49:36.678Z,1520513376.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:37.060Z,1520513377.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T12:49:37.077Z,1520513377.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:37.481Z,1520513377.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T12:49:37.482Z,1520513377.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:37.849Z,1520513377.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T12:49:37.850Z,1520513377.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:38.251Z,1520513378.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T12:49:38.252Z,1520513378.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:38.648Z,1520513378.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T12:49:38.653Z,1520513378.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:39.054Z,1520513379.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T12:49:39.055Z,1520513379.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:39.461Z,1520513379.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T12:49:39.462Z,1520513379.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:39.861Z,1520513379.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T12:49:39.862Z,1520513379.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:40.266Z,1520513380.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T12:49:40.267Z,1520513380.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:40.655Z,1520513380.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T12:49:40.656Z,1520513380.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:41.047Z,1520513381.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T12:49:41.048Z,1520513381.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:41.453Z,1520513381.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T12:49:41.454Z,1520513381.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:41.855Z,1520513381.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T12:49:41.856Z,1520513381.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:42.250Z,1520513382.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T12:49:42.251Z,1520513382.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:42.659Z,1520513382.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T12:49:42.660Z,1520513382.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:43.060Z,1520513383.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T12:49:43.061Z,1520513383.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:43.471Z,1520513383.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T12:49:43.472Z,1520513383.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:43.853Z,1520513383.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T12:49:43.854Z,1520513383.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:44.259Z,1520513384.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:44.655Z,1520513384.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:45.055Z,1520513385.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:45.410Z,1520513385.410 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T12:49:45.410Z,1520513385.410 [NAL9602] Data Fault, FailCount= 4
2018-03-08T12:49:45.410Z,1520513385.410 [NAL9602](ERROR): Data Fault
2018-03-08T12:49:45.462Z,1520513385.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:45.474Z,1520513385.474 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T12:49:45.814Z,1520513385.814 [NAL9602](INFO): Powering down
2018-03-08T12:49:45.867Z,1520513385.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:46.256Z,1520513386.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:46.645Z,1520513386.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:46.658Z,1520513386.658 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T12:49:46.658Z,1520513386.658 [NAL9602] No Fault, FailCount= 4
2018-03-08T12:49:47.054Z,1520513387.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:47.449Z,1520513387.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:47.849Z,1520513387.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:48.254Z,1520513388.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:48.651Z,1520513388.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:49.054Z,1520513389.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:49.453Z,1520513389.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:49.849Z,1520513389.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:50.253Z,1520513390.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:50.653Z,1520513390.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:51.065Z,1520513391.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:51.438Z,1520513391.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:51.861Z,1520513391.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:52.244Z,1520513392.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:52.636Z,1520513392.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:53.041Z,1520513393.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:53.469Z,1520513393.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:53.838Z,1520513393.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:54.245Z,1520513394.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:54.648Z,1520513394.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:55.041Z,1520513395.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:55.445Z,1520513395.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:55.846Z,1520513395.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:56.241Z,1520513396.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:56.649Z,1520513396.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:57.049Z,1520513397.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:57.442Z,1520513397.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:57.849Z,1520513397.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:58.254Z,1520513398.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:58.642Z,1520513398.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:59.047Z,1520513399.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:59.449Z,1520513399.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:49:59.842Z,1520513399.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:00.246Z,1520513400.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:00.649Z,1520513400.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:01.042Z,1520513401.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:01.455Z,1520513401.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:01.855Z,1520513401.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:02.242Z,1520513402.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:02.651Z,1520513402.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:03.050Z,1520513403.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:03.053Z,1520513403.053 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T12:50:03.054Z,1520513403.054 [Default:CheckIn:C.Wait] Stopped
2018-03-08T12:50:03.054Z,1520513403.054 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T12:50:03.054Z,1520513403.054 [Default:CheckIn:D] Running Loop=1
2018-03-08T12:50:03.444Z,1520513403.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:03.447Z,1520513403.447 [Default:CheckIn:D] Stopped
2018-03-08T12:50:03.447Z,1520513403.447 [Default:CheckIn:E] Running Loop=1
2018-03-08T12:50:03.850Z,1520513403.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:03.853Z,1520513403.853 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 304.310710 min 
2018-03-08T12:50:03.853Z,1520513403.853 [Default:CheckIn:E] Stopped
2018-03-08T12:50:03.854Z,1520513403.854 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T12:50:03.854Z,1520513403.854 [Default:CheckIn] Stopped
2018-03-08T12:50:03.854Z,1520513403.854 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T12:50:03.854Z,1520513403.854 [Default:CheckIn](INFO): Running loop #30
2018-03-08T12:50:03.854Z,1520513403.854 [Default:CheckIn] Running Loop=30
2018-03-08T12:50:03.854Z,1520513403.854 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T12:50:03.854Z,1520513403.854 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T12:50:04.250Z,1520513404.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:07.345Z,1520513407.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:07.486Z,1520513407.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:07.831Z,1520513407.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:08.234Z,1520513408.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:08.630Z,1520513408.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:09.034Z,1520513409.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:09.411Z,1520513409.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:09.818Z,1520513409.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:10.215Z,1520513410.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:10.615Z,1520513410.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:11.018Z,1520513411.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:11.418Z,1520513411.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:11.816Z,1520513411.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:12.213Z,1520513412.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:12.612Z,1520513412.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:13.017Z,1520513413.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:13.409Z,1520513413.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:13.815Z,1520513413.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:14.211Z,1520513414.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:14.611Z,1520513414.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:15.038Z,1520513415.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:15.411Z,1520513415.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:15.809Z,1520513415.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:16.185Z,1520513416.185 [NAL9602](INFO): Powering up NAL9602
2018-03-08T12:50:16.218Z,1520513416.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:16.619Z,1520513416.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:17.012Z,1520513417.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:17.415Z,1520513417.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:17.810Z,1520513417.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:18.211Z,1520513418.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:18.615Z,1520513418.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:19.014Z,1520513419.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:19.441Z,1520513419.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:19.819Z,1520513419.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:20.217Z,1520513420.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:20.612Z,1520513420.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:21.012Z,1520513421.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:21.417Z,1520513421.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:21.815Z,1520513421.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:22.230Z,1520513422.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:22.618Z,1520513422.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:23.017Z,1520513423.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:23.422Z,1520513423.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:23.815Z,1520513423.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:24.218Z,1520513424.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:24.624Z,1520513424.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:25.017Z,1520513425.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:25.418Z,1520513425.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:25.821Z,1520513425.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:26.214Z,1520513426.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:26.621Z,1520513426.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:27.027Z,1520513427.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:27.378Z,1520513427.378 [NAL9602](INFO): NAL9602 initialized
2018-03-08T12:50:27.423Z,1520513427.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:27.811Z,1520513427.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:28.232Z,1520513428.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:28.631Z,1520513428.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:29.025Z,1520513429.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:29.416Z,1520513429.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:29.822Z,1520513429.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:30.216Z,1520513430.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:30.615Z,1520513430.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:31.034Z,1520513431.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:31.422Z,1520513431.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:31.828Z,1520513431.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:32.218Z,1520513432.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:32.623Z,1520513432.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:33.028Z,1520513433.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:33.431Z,1520513433.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:33.822Z,1520513433.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:34.220Z,1520513434.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:34.619Z,1520513434.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:35.029Z,1520513435.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:35.428Z,1520513435.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:35.824Z,1520513435.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:36.221Z,1520513436.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:36.621Z,1520513436.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:37.027Z,1520513437.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:37.429Z,1520513437.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:37.828Z,1520513437.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:38.221Z,1520513438.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:38.620Z,1520513438.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:39.028Z,1520513439.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:39.434Z,1520513439.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:39.827Z,1520513439.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:40.225Z,1520513440.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:40.621Z,1520513440.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:41.033Z,1520513441.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:41.429Z,1520513441.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:41.830Z,1520513441.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:42.222Z,1520513442.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:42.623Z,1520513442.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:43.029Z,1520513443.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:43.429Z,1520513443.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:43.832Z,1520513443.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:44.226Z,1520513444.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:44.619Z,1520513444.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:45.039Z,1520513445.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:45.435Z,1520513445.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:45.812Z,1520513445.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:46.215Z,1520513446.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:46.606Z,1520513446.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:47.031Z,1520513447.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:47.443Z,1520513447.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:47.842Z,1520513447.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:48.213Z,1520513448.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:48.616Z,1520513448.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:49.020Z,1520513449.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:49.416Z,1520513449.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:49.842Z,1520513449.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:50.214Z,1520513450.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:50.612Z,1520513450.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:51.024Z,1520513451.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:51.444Z,1520513451.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:51.817Z,1520513451.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:52.222Z,1520513452.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:52.615Z,1520513452.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:53.045Z,1520513453.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:53.426Z,1520513453.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:53.821Z,1520513453.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:54.220Z,1520513454.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:54.623Z,1520513454.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:55.020Z,1520513455.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:55.420Z,1520513455.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:55.826Z,1520513455.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:56.218Z,1520513456.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:56.610Z,1520513456.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:57.020Z,1520513457.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:57.450Z,1520513457.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:57.820Z,1520513457.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:58.217Z,1520513458.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:58.617Z,1520513458.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:59.036Z,1520513459.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:59.431Z,1520513459.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:50:59.828Z,1520513459.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:00.222Z,1520513460.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:00.615Z,1520513460.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:01.038Z,1520513461.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:01.422Z,1520513461.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:01.828Z,1520513461.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:02.220Z,1520513462.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:02.608Z,1520513462.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:03.030Z,1520513463.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:03.434Z,1520513463.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:03.830Z,1520513463.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:04.225Z,1520513464.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:04.625Z,1520513464.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:07.729Z,1520513467.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:07.877Z,1520513467.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:08.222Z,1520513468.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:08.595Z,1520513468.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:09.026Z,1520513469.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:09.400Z,1520513469.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:09.799Z,1520513469.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:10.229Z,1520513470.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:10.608Z,1520513470.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:11.010Z,1520513471.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:11.393Z,1520513471.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:11.798Z,1520513471.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:12.200Z,1520513472.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:12.597Z,1520513472.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:13.003Z,1520513473.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:13.408Z,1520513473.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:13.815Z,1520513473.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:14.204Z,1520513474.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:14.605Z,1520513474.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:15.012Z,1520513475.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:15.412Z,1520513475.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:15.812Z,1520513475.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:16.204Z,1520513476.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:16.599Z,1520513476.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:17.014Z,1520513477.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:17.407Z,1520513477.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:17.812Z,1520513477.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:18.205Z,1520513478.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:18.603Z,1520513478.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:19.022Z,1520513479.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:19.417Z,1520513479.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:19.818Z,1520513479.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:20.205Z,1520513480.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:20.598Z,1520513480.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:21.013Z,1520513481.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:21.418Z,1520513481.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:21.814Z,1520513481.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:22.210Z,1520513482.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:22.606Z,1520513482.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:23.013Z,1520513483.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:23.409Z,1520513483.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:23.809Z,1520513483.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:24.203Z,1520513484.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:24.599Z,1520513484.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:25.011Z,1520513485.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:25.413Z,1520513485.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:25.811Z,1520513485.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:26.207Z,1520513486.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:26.600Z,1520513486.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:27.023Z,1520513487.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:27.421Z,1520513487.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:27.830Z,1520513487.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:28.201Z,1520513488.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:28.600Z,1520513488.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:29.031Z,1520513489.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:29.400Z,1520513489.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:29.832Z,1520513489.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:30.200Z,1520513490.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:30.603Z,1520513490.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:31.006Z,1520513491.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:31.408Z,1520513491.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:31.815Z,1520513491.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:32.204Z,1520513492.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:32.602Z,1520513492.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:33.008Z,1520513493.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:33.408Z,1520513493.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:33.809Z,1520513493.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:34.206Z,1520513494.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:34.610Z,1520513494.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:35.008Z,1520513495.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:35.407Z,1520513495.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:35.808Z,1520513495.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:36.200Z,1520513496.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:36.597Z,1520513496.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:37.008Z,1520513497.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:37.408Z,1520513497.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:37.805Z,1520513497.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:38.203Z,1520513498.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:38.598Z,1520513498.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:39.014Z,1520513499.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:39.408Z,1520513499.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:39.808Z,1520513499.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:40.204Z,1520513500.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:40.599Z,1520513500.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:41.008Z,1520513501.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:41.406Z,1520513501.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:41.808Z,1520513501.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:42.204Z,1520513502.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:42.596Z,1520513502.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:43.007Z,1520513503.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:43.408Z,1520513503.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:43.814Z,1520513503.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:44.203Z,1520513504.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:44.599Z,1520513504.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:45.018Z,1520513505.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:45.414Z,1520513505.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:45.808Z,1520513505.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:46.204Z,1520513506.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:46.606Z,1520513506.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:47.008Z,1520513507.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:47.053Z,1520513507.053 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T12:51:47.409Z,1520513507.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:47.807Z,1520513507.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:48.204Z,1520513508.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:48.597Z,1520513508.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:49.007Z,1520513509.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:49.414Z,1520513509.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:49.804Z,1520513509.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:50.207Z,1520513510.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:50.610Z,1520513510.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:51.008Z,1520513511.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:51.414Z,1520513511.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:51.814Z,1520513511.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:52.205Z,1520513512.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:52.602Z,1520513512.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:53.014Z,1520513513.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:53.403Z,1520513513.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:53.807Z,1520513513.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:54.205Z,1520513514.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:54.597Z,1520513514.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:55.009Z,1520513515.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:55.414Z,1520513515.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:55.808Z,1520513515.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:56.231Z,1520513516.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:56.604Z,1520513516.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:57.014Z,1520513517.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:57.412Z,1520513517.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:57.818Z,1520513517.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:58.205Z,1520513518.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:58.606Z,1520513518.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:59.018Z,1520513519.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:59.411Z,1520513519.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:51:59.813Z,1520513519.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:00.202Z,1520513520.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:00.599Z,1520513520.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:01.014Z,1520513521.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:01.419Z,1520513521.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:01.818Z,1520513521.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:02.211Z,1520513522.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:02.606Z,1520513522.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:03.012Z,1520513523.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:03.413Z,1520513523.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:03.824Z,1520513523.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:04.215Z,1520513524.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:04.592Z,1520513524.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:05.020Z,1520513525.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:08.112Z,1520513528.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:08.253Z,1520513528.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:08.584Z,1520513528.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:08.983Z,1520513528.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:09.389Z,1520513529.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:09.781Z,1520513529.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:10.214Z,1520513530.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:10.583Z,1520513530.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:10.984Z,1520513530.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:11.383Z,1520513531.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:11.778Z,1520513531.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:12.181Z,1520513532.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:12.582Z,1520513532.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:12.983Z,1520513532.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:13.385Z,1520513533.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:13.795Z,1520513533.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:14.196Z,1520513534.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:14.585Z,1520513534.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:14.983Z,1520513534.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:15.387Z,1520513535.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:15.782Z,1520513535.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:16.192Z,1520513536.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:16.592Z,1520513536.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:16.998Z,1520513536.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:17.384Z,1520513537.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:17.782Z,1520513537.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:18.183Z,1520513538.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:18.584Z,1520513538.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:18.987Z,1520513538.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:19.391Z,1520513539.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:19.791Z,1520513539.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:20.191Z,1520513540.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:20.582Z,1520513540.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:20.988Z,1520513540.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:21.387Z,1520513541.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:21.790Z,1520513541.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:22.192Z,1520513542.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:22.588Z,1520513542.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:22.998Z,1520513542.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:23.387Z,1520513543.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:23.780Z,1520513543.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:24.186Z,1520513544.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:24.587Z,1520513544.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:24.991Z,1520513544.991 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:24.991Z,1520513544.991 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 103
2018-03-08T12:52:24.991Z,1520513544.991 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T12:52:24.993Z,1520513544.993 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:24.993Z,1520513544.993 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 103
2018-03-08T12:52:24.993Z,1520513544.993 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T12:52:24.994Z,1520513544.994 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:24.995Z,1520513544.995 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 103
2018-03-08T12:52:24.995Z,1520513544.995 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T12:52:25.007Z,1520513545.007 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T12:52:25.007Z,1520513545.007 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T12:52:25.008Z,1520513545.008 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T12:52:25.411Z,1520513545.411 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T12:52:25.411Z,1520513545.411 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 103
2018-03-08T12:52:25.412Z,1520513545.412 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T12:52:25.412Z,1520513545.412 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 103
2018-03-08T12:52:25.412Z,1520513545.412 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T12:52:25.412Z,1520513545.412 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 103
2018-03-08T12:52:25.801Z,1520513545.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T12:52:25.802Z,1520513545.802 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:52:25.802Z,1520513545.802 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:52:25.802Z,1520513545.802 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T12:52:25.803Z,1520513545.803 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:52:25.803Z,1520513545.803 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:52:25.803Z,1520513545.803 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T12:52:25.804Z,1520513545.804 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:52:25.804Z,1520513545.804 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:52:26.233Z,1520513546.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T12:52:26.234Z,1520513546.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:26.609Z,1520513546.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T12:52:26.610Z,1520513546.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:26.994Z,1520513546.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T12:52:26.995Z,1520513546.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:27.372Z,1520513547.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T12:52:27.393Z,1520513547.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:27.797Z,1520513547.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T12:52:27.798Z,1520513547.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:28.206Z,1520513548.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T12:52:28.207Z,1520513548.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:28.594Z,1520513548.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T12:52:28.595Z,1520513548.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:28.995Z,1520513548.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T12:52:28.996Z,1520513548.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:29.374Z,1520513549.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T12:52:29.375Z,1520513549.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:29.771Z,1520513549.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T12:52:29.771Z,1520513549.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:30.194Z,1520513550.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T12:52:30.195Z,1520513550.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:30.582Z,1520513550.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T12:52:30.583Z,1520513550.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:31.007Z,1520513551.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T12:52:31.009Z,1520513551.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:31.407Z,1520513551.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T12:52:31.408Z,1520513551.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:31.792Z,1520513551.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T12:52:31.805Z,1520513551.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:32.194Z,1520513552.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T12:52:32.195Z,1520513552.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:32.586Z,1520513552.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T12:52:32.587Z,1520513552.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:32.992Z,1520513552.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T12:52:32.993Z,1520513552.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:33.396Z,1520513553.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T12:52:33.401Z,1520513553.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:33.796Z,1520513553.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T12:52:33.797Z,1520513553.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:34.187Z,1520513554.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T12:52:34.188Z,1520513554.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:34.586Z,1520513554.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T12:52:34.587Z,1520513554.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:34.991Z,1520513554.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T12:52:34.992Z,1520513554.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:35.402Z,1520513555.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T12:52:35.403Z,1520513555.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:35.796Z,1520513555.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T12:52:35.797Z,1520513555.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:36.194Z,1520513556.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T12:52:36.195Z,1520513556.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:36.648Z,1520513556.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T12:52:36.669Z,1520513556.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:36.990Z,1520513556.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T12:52:36.991Z,1520513556.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:37.387Z,1520513557.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T12:52:37.388Z,1520513557.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:37.790Z,1520513557.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T12:52:37.791Z,1520513557.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:38.197Z,1520513558.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T12:52:38.198Z,1520513558.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:38.596Z,1520513558.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T12:52:38.597Z,1520513558.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:38.998Z,1520513558.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T12:52:38.999Z,1520513558.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:39.387Z,1520513559.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T12:52:39.388Z,1520513559.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:39.789Z,1520513559.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T12:52:39.790Z,1520513559.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:40.194Z,1520513560.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T12:52:40.195Z,1520513560.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:40.593Z,1520513560.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T12:52:40.594Z,1520513560.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:40.993Z,1520513560.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T12:52:40.994Z,1520513560.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:41.403Z,1520513561.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T12:52:41.404Z,1520513561.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:41.799Z,1520513561.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T12:52:41.801Z,1520513561.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:42.200Z,1520513562.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T12:52:42.205Z,1520513562.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:42.598Z,1520513562.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T12:52:42.599Z,1520513562.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:42.995Z,1520513562.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T12:52:42.996Z,1520513562.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:43.396Z,1520513563.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T12:52:43.397Z,1520513563.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:43.787Z,1520513563.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T12:52:43.791Z,1520513563.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:44.200Z,1520513564.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T12:52:44.201Z,1520513564.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:44.599Z,1520513564.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T12:52:44.600Z,1520513564.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:45.004Z,1520513565.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:45.383Z,1520513565.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:45.782Z,1520513565.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:46.183Z,1520513566.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:46.585Z,1520513566.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:46.992Z,1520513566.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:47.392Z,1520513567.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:47.798Z,1520513567.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:48.187Z,1520513568.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:48.583Z,1520513568.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:48.998Z,1520513568.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:49.392Z,1520513569.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:49.792Z,1520513569.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:50.187Z,1520513570.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:50.582Z,1520513570.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:50.992Z,1520513570.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:51.391Z,1520513571.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:51.798Z,1520513571.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:52.190Z,1520513572.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:52.587Z,1520513572.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:52.986Z,1520513572.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:53.392Z,1520513573.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:53.792Z,1520513573.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:54.191Z,1520513574.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:54.587Z,1520513574.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:54.990Z,1520513574.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:55.387Z,1520513575.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:55.783Z,1520513575.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:56.191Z,1520513576.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:56.592Z,1520513576.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:56.992Z,1520513576.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:57.387Z,1520513577.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:57.787Z,1520513577.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:58.188Z,1520513578.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:58.588Z,1520513578.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:58.991Z,1520513578.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:59.392Z,1520513579.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:52:59.791Z,1520513579.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:00.197Z,1520513580.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:00.588Z,1520513580.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:00.999Z,1520513580.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:01.392Z,1520513581.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:01.792Z,1520513581.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:02.182Z,1520513582.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:02.585Z,1520513582.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:02.982Z,1520513582.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:03.392Z,1520513583.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:03.791Z,1520513583.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:04.192Z,1520513584.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:04.582Z,1520513584.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:04.983Z,1520513584.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:05.384Z,1520513585.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:08.497Z,1520513588.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:08.650Z,1520513588.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:08.000Z,1520513589.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:09.401Z,1520513589.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:09.799Z,1520513589.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:10.196Z,1520513590.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:10.603Z,1520513590.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:11.000Z,1520513591.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:11.403Z,1520513591.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:11.806Z,1520513591.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:12.206Z,1520513592.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:12.597Z,1520513592.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:13.004Z,1520513593.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:13.404Z,1520513593.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:13.806Z,1520513593.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:14.207Z,1520513594.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:14.597Z,1520513594.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:15.000Z,1520513595.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:15.404Z,1520513595.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:15.800Z,1520513595.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:16.197Z,1520513596.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:16.602Z,1520513596.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:17.002Z,1520513597.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:17.404Z,1520513597.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:17.806Z,1520513597.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:18.200Z,1520513598.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:18.599Z,1520513598.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:19.004Z,1520513599.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:19.404Z,1520513599.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:19.801Z,1520513599.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:20.207Z,1520513600.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:20.602Z,1520513600.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:21.000Z,1520513601.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:21.400Z,1520513601.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:21.806Z,1520513601.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:22.197Z,1520513602.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:22.589Z,1520513602.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:23.001Z,1520513603.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:23.404Z,1520513603.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:23.801Z,1520513603.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:24.196Z,1520513604.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:24.599Z,1520513604.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:25.001Z,1520513605.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:25.400Z,1520513605.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:25.829Z,1520513605.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:26.199Z,1520513606.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:26.599Z,1520513606.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:26.000Z,1520513607.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:27.401Z,1520513607.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:27.800Z,1520513607.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:28.196Z,1520513608.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:28.592Z,1520513608.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:29.000Z,1520513609.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:29.403Z,1520513609.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:29.800Z,1520513609.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:30.200Z,1520513610.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:30.598Z,1520513610.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:31.000Z,1520513611.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:31.405Z,1520513611.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:31.806Z,1520513611.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:32.200Z,1520513612.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:32.594Z,1520513612.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:33.000Z,1520513613.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:33.401Z,1520513613.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:33.800Z,1520513613.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:34.200Z,1520513614.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:34.593Z,1520513614.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:35.000Z,1520513615.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:35.398Z,1520513615.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:35.800Z,1520513615.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:36.200Z,1520513616.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:36.597Z,1520513616.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:37.001Z,1520513617.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:37.405Z,1520513617.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:37.800Z,1520513617.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:38.198Z,1520513618.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:38.597Z,1520513618.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:38.000Z,1520513619.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:39.404Z,1520513619.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:39.811Z,1520513619.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:40.199Z,1520513620.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:40.592Z,1520513620.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:41.005Z,1520513621.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:41.402Z,1520513621.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:41.804Z,1520513621.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:42.195Z,1520513622.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:42.594Z,1520513622.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:43.005Z,1520513623.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:43.403Z,1520513623.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:43.803Z,1520513623.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:44.200Z,1520513624.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:44.602Z,1520513624.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:45.003Z,1520513625.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:45.404Z,1520513625.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:45.804Z,1520513625.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:46.204Z,1520513626.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:46.591Z,1520513626.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:47.003Z,1520513627.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:47.403Z,1520513627.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:47.805Z,1520513627.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:48.195Z,1520513628.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:48.595Z,1520513628.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:49.004Z,1520513629.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:49.404Z,1520513629.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:49.810Z,1520513629.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:50.198Z,1520513630.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:50.606Z,1520513630.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:51.003Z,1520513631.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:51.405Z,1520513631.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:51.811Z,1520513631.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:52.202Z,1520513632.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:52.592Z,1520513632.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:53.003Z,1520513633.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:53.403Z,1520513633.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:53.800Z,1520513633.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:54.199Z,1520513634.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:54.594Z,1520513634.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:55.004Z,1520513635.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:55.404Z,1520513635.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:55.806Z,1520513635.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:56.199Z,1520513636.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:56.595Z,1520513636.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:57.005Z,1520513637.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:57.407Z,1520513637.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:57.811Z,1520513637.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:58.198Z,1520513638.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:58.593Z,1520513638.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:59.004Z,1520513639.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:59.410Z,1520513639.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:53:59.803Z,1520513639.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:00.199Z,1520513640.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:00.601Z,1520513640.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:01.005Z,1520513641.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:01.411Z,1520513641.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:01.810Z,1520513641.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:02.199Z,1520513642.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:02.594Z,1520513642.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:03.004Z,1520513643.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:03.405Z,1520513643.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:03.804Z,1520513643.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:04.199Z,1520513644.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:04.592Z,1520513644.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:05.005Z,1520513645.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:05.406Z,1520513645.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:08.508Z,1520513648.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:08.643Z,1520513648.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:09.005Z,1520513649.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:09.403Z,1520513649.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:09.803Z,1520513649.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:10.207Z,1520513650.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:10.608Z,1520513650.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:11.010Z,1520513651.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:11.402Z,1520513651.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:11.803Z,1520513651.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:12.203Z,1520513652.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:12.598Z,1520513652.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:13.008Z,1520513653.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:13.407Z,1520513653.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:13.808Z,1520513653.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:14.204Z,1520513654.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:14.598Z,1520513654.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:15.015Z,1520513655.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:15.408Z,1520513655.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:15.808Z,1520513655.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:16.203Z,1520513656.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:16.603Z,1520513656.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:17.008Z,1520513657.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:17.409Z,1520513657.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:17.814Z,1520513657.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:18.203Z,1520513658.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:18.599Z,1520513658.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:19.008Z,1520513659.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:19.407Z,1520513659.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:19.812Z,1520513659.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:20.211Z,1520513660.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:20.606Z,1520513660.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:21.015Z,1520513661.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:21.409Z,1520513661.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:21.808Z,1520513661.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:22.201Z,1520513662.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:22.606Z,1520513662.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:23.017Z,1520513663.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:23.422Z,1520513663.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:23.826Z,1520513663.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:24.215Z,1520513664.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:24.618Z,1520513664.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:25.023Z,1520513665.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:25.400Z,1520513665.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:25.824Z,1520513665.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:26.195Z,1520513666.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:26.591Z,1520513666.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:27.024Z,1520513667.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:27.427Z,1520513667.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:27.804Z,1520513667.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:28.201Z,1520513668.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:28.599Z,1520513668.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:29.008Z,1520513669.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:29.412Z,1520513669.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:29.804Z,1520513669.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:30.212Z,1520513670.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:30.602Z,1520513670.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:31.005Z,1520513671.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:31.404Z,1520513671.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:31.808Z,1520513671.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:32.210Z,1520513672.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:32.602Z,1520513672.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:33.010Z,1520513673.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:33.408Z,1520513673.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:33.811Z,1520513673.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:34.203Z,1520513674.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:34.595Z,1520513674.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:35.006Z,1520513675.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:35.415Z,1520513675.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:35.805Z,1520513675.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:36.200Z,1520513676.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:36.599Z,1520513676.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:37.009Z,1520513677.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:37.413Z,1520513677.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:37.812Z,1520513677.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:38.208Z,1520513678.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:38.600Z,1520513678.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:39.008Z,1520513679.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:39.412Z,1520513679.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:39.816Z,1520513679.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:40.205Z,1520513680.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:40.608Z,1520513680.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:41.019Z,1520513681.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:41.419Z,1520513681.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:41.814Z,1520513681.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:42.205Z,1520513682.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:42.606Z,1520513682.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:43.015Z,1520513683.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:43.409Z,1520513683.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:43.819Z,1520513683.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:44.202Z,1520513684.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:44.603Z,1520513684.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:45.009Z,1520513685.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:45.418Z,1520513685.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:45.805Z,1520513685.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:46.206Z,1520513686.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:46.605Z,1520513686.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:47.019Z,1520513687.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:47.416Z,1520513687.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:47.818Z,1520513687.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:48.203Z,1520513688.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:48.605Z,1520513688.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:49.008Z,1520513689.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:49.410Z,1520513689.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:49.809Z,1520513689.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:50.225Z,1520513690.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:50.602Z,1520513690.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:51.009Z,1520513691.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:51.419Z,1520513691.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:51.812Z,1520513691.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:52.211Z,1520513692.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:52.604Z,1520513692.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:53.013Z,1520513693.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:53.412Z,1520513693.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:53.810Z,1520513693.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:54.204Z,1520513694.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:54.607Z,1520513694.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:55.013Z,1520513695.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:55.407Z,1520513695.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:55.819Z,1520513695.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:56.214Z,1520513696.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:56.583Z,1520513696.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:57.013Z,1520513697.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:57.413Z,1520513697.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:57.818Z,1520513697.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:58.207Z,1520513698.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:58.618Z,1520513698.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:59.019Z,1520513699.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:59.419Z,1520513699.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:54:59.818Z,1520513699.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:00.213Z,1520513700.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:00.615Z,1520513700.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:01.026Z,1520513701.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:01.417Z,1520513701.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:01.819Z,1520513701.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:02.220Z,1520513702.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:02.590Z,1520513702.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:03.013Z,1520513703.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:03.426Z,1520513703.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:03.809Z,1520513703.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:04.196Z,1520513704.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:04.199Z,1520513704.199 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T12:50:03.9Z
2018-03-08T12:55:04.199Z,1520513704.199 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T12:55:04.199Z,1520513704.199 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T12:55:04.602Z,1520513704.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:05.092Z,1520513705.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:05.427Z,1520513705.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:05.825Z,1520513705.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:08.899Z,1520513708.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:09.053Z,1520513709.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:09.357Z,1520513709.357 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0120.lzma
2018-03-08T12:55:09.430Z,1520513709.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:09.804Z,1520513709.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:10.151Z,1520513710.151 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0120.lzma.bak
2018-03-08T12:55:10.152Z,1520513710.152 [DataOverHttps](INFO): SBD MOMSN=7985831
2018-03-08T12:55:10.209Z,1520513710.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:13.355Z,1520513713.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:13.482Z,1520513713.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:13.878Z,1520513713.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:17.034Z,1520513717.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:17.171Z,1520513717.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:17.511Z,1520513717.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:17.904Z,1520513717.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:18.308Z,1520513718.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:18.704Z,1520513718.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:19.133Z,1520513719.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:22.211Z,1520513722.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:22.362Z,1520513722.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:22.666Z,1520513722.666 [DataOverHttps](INFO): Sending 138 bytes from file Logs/20180308T074127/Express0121.lzma
2018-03-08T12:55:22.722Z,1520513722.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:23.095Z,1520513723.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:23.463Z,1520513723.463 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0121.lzma.bak
2018-03-08T12:55:23.463Z,1520513723.463 [DataOverHttps](INFO): SBD MOMSN=7985833
2018-03-08T12:55:23.526Z,1520513723.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:24.085Z,1520513724.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:24.088Z,1520513724.088 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T12:55:24.088Z,1520513724.088 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T12:55:24.088Z,1520513724.088 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T12:55:24.338Z,1520513724.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:27.425Z,1520513727.425 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:27.425Z,1520513727.425 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 104
2018-03-08T12:55:27.425Z,1520513727.425 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T12:55:27.427Z,1520513727.427 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:27.427Z,1520513727.427 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 104
2018-03-08T12:55:27.427Z,1520513727.427 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T12:55:27.429Z,1520513727.429 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:27.429Z,1520513727.429 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 104
2018-03-08T12:55:27.429Z,1520513727.429 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T12:55:27.440Z,1520513727.440 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T12:55:27.441Z,1520513727.441 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T12:55:27.441Z,1520513727.441 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T12:55:27.593Z,1520513727.593 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T12:55:27.593Z,1520513727.593 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 104
2018-03-08T12:55:27.594Z,1520513727.594 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T12:55:27.594Z,1520513727.594 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 104
2018-03-08T12:55:27.594Z,1520513727.594 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T12:55:27.595Z,1520513727.595 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 104
2018-03-08T12:55:27.898Z,1520513727.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T12:55:27.899Z,1520513727.899 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:55:27.899Z,1520513727.899 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:55:27.900Z,1520513727.900 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T12:55:27.900Z,1520513727.900 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:55:27.900Z,1520513727.900 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:55:27.901Z,1520513727.901 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T12:55:27.901Z,1520513727.901 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:55:27.901Z,1520513727.901 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:55:28.301Z,1520513728.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-03-08T12:55:28.302Z,1520513728.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:28.698Z,1520513728.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-03-08T12:55:28.699Z,1520513728.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:29.101Z,1520513729.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-03-08T12:55:29.101Z,1520513729.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:29.511Z,1520513729.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-03-08T12:55:29.512Z,1520513729.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:29.906Z,1520513729.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-03-08T12:55:29.907Z,1520513729.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:30.302Z,1520513730.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-03-08T12:55:30.303Z,1520513730.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:30.697Z,1520513730.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-03-08T12:55:30.698Z,1520513730.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:31.094Z,1520513731.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-08T12:55:31.095Z,1520513731.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:31.497Z,1520513731.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-03-08T12:55:31.498Z,1520513731.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:31.897Z,1520513731.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-03-08T12:55:31.898Z,1520513731.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:32.301Z,1520513732.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-08T12:55:32.302Z,1520513732.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:32.703Z,1520513732.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-08T12:55:32.704Z,1520513732.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:33.111Z,1520513733.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T12:55:33.112Z,1520513733.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:33.492Z,1520513733.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T12:55:33.493Z,1520513733.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:33.896Z,1520513733.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-08T12:55:33.897Z,1520513733.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:34.297Z,1520513734.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-08T12:55:34.298Z,1520513734.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:34.695Z,1520513734.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-08T12:55:34.697Z,1520513734.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:35.101Z,1520513735.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-08T12:55:35.102Z,1520513735.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:35.503Z,1520513735.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-08T12:55:35.504Z,1520513735.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:35.900Z,1520513735.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-08T12:55:35.901Z,1520513735.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:36.296Z,1520513736.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-08T12:55:36.297Z,1520513736.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:36.697Z,1520513736.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-08T12:55:36.698Z,1520513736.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:37.106Z,1520513737.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-08T12:55:37.107Z,1520513737.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:37.496Z,1520513737.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T12:55:37.497Z,1520513737.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:37.898Z,1520513737.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-08T12:55:37.899Z,1520513737.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:38.312Z,1520513738.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T12:55:38.329Z,1520513738.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:38.707Z,1520513738.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T12:55:38.708Z,1520513738.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:39.107Z,1520513739.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T12:55:39.108Z,1520513739.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:39.491Z,1520513739.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T12:55:39.492Z,1520513739.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:39.896Z,1520513739.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T12:55:39.901Z,1520513739.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:40.303Z,1520513740.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-08T12:55:40.304Z,1520513740.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:40.695Z,1520513740.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-08T12:55:40.695Z,1520513740.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:41.107Z,1520513741.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-08T12:55:41.107Z,1520513741.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:41.507Z,1520513741.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-08T12:55:41.508Z,1520513741.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:41.908Z,1520513741.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-08T12:55:41.909Z,1520513741.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:42.297Z,1520513742.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T12:55:42.298Z,1520513742.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:42.699Z,1520513742.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-08T12:55:42.699Z,1520513742.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:43.101Z,1520513743.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T12:55:43.102Z,1520513743.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:43.506Z,1520513743.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T12:55:43.507Z,1520513743.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:43.903Z,1520513743.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T12:55:43.904Z,1520513743.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:44.304Z,1520513744.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T12:55:44.305Z,1520513744.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:44.714Z,1520513744.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-08T12:55:44.715Z,1520513744.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:45.107Z,1520513745.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T12:55:45.108Z,1520513745.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:45.496Z,1520513745.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-08T12:55:45.497Z,1520513745.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:45.897Z,1520513745.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-08T12:55:45.898Z,1520513745.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:46.298Z,1520513746.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T12:55:46.299Z,1520513746.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:46.699Z,1520513746.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T12:55:46.700Z,1520513746.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:47.106Z,1520513747.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T12:55:47.107Z,1520513747.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:47.507Z,1520513747.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:47.908Z,1520513747.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:48.301Z,1520513748.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:48.695Z,1520513748.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:49.101Z,1520513749.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:49.502Z,1520513749.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:49.902Z,1520513749.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:50.307Z,1520513750.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:50.707Z,1520513750.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:51.107Z,1520513751.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:51.536Z,1520513751.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:51.906Z,1520513751.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:52.385Z,1520513752.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:52.701Z,1520513752.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:53.107Z,1520513753.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:53.514Z,1520513753.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:53.903Z,1520513753.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:54.297Z,1520513754.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:54.698Z,1520513754.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:55.137Z,1520513755.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:55.503Z,1520513755.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:55.898Z,1520513755.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:56.314Z,1520513756.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:56.708Z,1520513756.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:57.108Z,1520513757.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:57.495Z,1520513757.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:57.898Z,1520513757.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:58.300Z,1520513758.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:58.697Z,1520513758.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:59.114Z,1520513759.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:59.508Z,1520513759.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:55:59.907Z,1520513759.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:00.303Z,1520513760.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:00.703Z,1520513760.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:01.102Z,1520513761.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:01.503Z,1520513761.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:01.903Z,1520513761.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:02.310Z,1520513762.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:02.707Z,1520513762.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:03.108Z,1520513763.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:03.495Z,1520513763.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:03.898Z,1520513763.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:04.302Z,1520513764.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:04.698Z,1520513764.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:05.108Z,1520513765.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:05.507Z,1520513765.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:05.909Z,1520513765.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:06.300Z,1520513766.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:06.699Z,1520513766.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:07.104Z,1520513767.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:07.504Z,1520513767.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:07.903Z,1520513767.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:08.314Z,1520513768.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:08.709Z,1520513768.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:09.108Z,1520513769.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:09.496Z,1520513769.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:09.900Z,1520513769.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:10.299Z,1520513770.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:10.697Z,1520513770.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:11.108Z,1520513771.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:11.507Z,1520513771.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:11.908Z,1520513771.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:12.301Z,1520513772.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:12.698Z,1520513772.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:13.103Z,1520513773.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:13.502Z,1520513773.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:13.903Z,1520513773.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:14.307Z,1520513774.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:14.714Z,1520513774.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:15.107Z,1520513775.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:15.495Z,1520513775.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:15.896Z,1520513775.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:16.306Z,1520513776.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:16.696Z,1520513776.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:17.107Z,1520513777.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:17.507Z,1520513777.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:17.907Z,1520513777.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:18.306Z,1520513778.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:18.703Z,1520513778.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:19.106Z,1520513779.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:19.506Z,1520513779.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:19.898Z,1520513779.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:20.314Z,1520513780.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:20.710Z,1520513780.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:21.107Z,1520513781.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:21.500Z,1520513781.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:21.902Z,1520513781.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:22.299Z,1520513782.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:22.701Z,1520513782.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:23.107Z,1520513783.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:23.512Z,1520513783.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:23.908Z,1520513783.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:24.300Z,1520513784.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:24.697Z,1520513784.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:27.909Z,1520513787.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:28.050Z,1520513788.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:28.397Z,1520513788.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:28.811Z,1520513788.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:29.188Z,1520513789.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:29.579Z,1520513789.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:29.978Z,1520513789.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:30.383Z,1520513790.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:30.785Z,1520513790.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:31.193Z,1520513791.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:31.591Z,1520513791.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:31.997Z,1520513791.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:32.391Z,1520513792.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:32.764Z,1520513792.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:33.200Z,1520513793.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:33.590Z,1520513793.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:33.991Z,1520513793.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:34.397Z,1520513794.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:34.793Z,1520513794.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:35.167Z,1520513795.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:35.593Z,1520513795.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:35.998Z,1520513795.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:36.397Z,1520513796.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:36.799Z,1520513796.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:37.198Z,1520513797.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:37.564Z,1520513797.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:37.990Z,1520513797.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:38.374Z,1520513798.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:38.779Z,1520513798.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:39.201Z,1520513799.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:39.600Z,1520513799.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:39.976Z,1520513799.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:40.379Z,1520513800.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:40.774Z,1520513800.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:41.180Z,1520513801.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:41.579Z,1520513801.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:41.979Z,1520513801.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:42.388Z,1520513802.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:42.792Z,1520513802.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:43.194Z,1520513803.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:43.573Z,1520513803.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:43.983Z,1520513803.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:44.383Z,1520513804.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:44.775Z,1520513804.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:45.190Z,1520513805.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:45.588Z,1520513805.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:45.986Z,1520513805.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:46.385Z,1520513806.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:46.786Z,1520513806.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:47.195Z,1520513807.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:47.614Z,1520513807.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:48.022Z,1520513808.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:48.394Z,1520513808.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:48.742Z,1520513808.742 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-03-08T12:56:48.742Z,1520513808.742 [DropWeight] Hardware Fault, FailCount= 1
2018-03-08T12:56:48.742Z,1520513808.742 [DropWeight](ERROR): Hardware Fault
2018-03-08T12:56:48.813Z,1520513808.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:48.833Z,1520513808.833 [CBIT](INFO): Critical error at 20180308T125648
2018-03-08T12:56:48.835Z,1520513808.835 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-03-08T12:56:48.835Z,1520513808.835 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-03-08T12:56:49.188Z,1520513809.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:49.199Z,1520513809.199 [CBIT](INFO): Critical error at 20180308T125648
2018-03-08T12:56:49.595Z,1520513809.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:49.985Z,1520513809.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:50.392Z,1520513810.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:50.781Z,1520513810.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:51.192Z,1520513811.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:51.597Z,1520513811.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:51.998Z,1520513811.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:52.389Z,1520513812.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:52.793Z,1520513812.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:53.203Z,1520513813.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:53.595Z,1520513813.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:53.970Z,1520513813.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:54.402Z,1520513814.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:54.799Z,1520513814.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:55.197Z,1520513815.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:55.579Z,1520513815.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:55.978Z,1520513815.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:56.379Z,1520513816.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:56.770Z,1520513816.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:57.184Z,1520513817.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:57.607Z,1520513817.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:57.976Z,1520513817.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:58.386Z,1520513818.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:58.778Z,1520513818.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:59.210Z,1520513819.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:56:59.586Z,1520513819.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:00.011Z,1520513820.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:00.392Z,1520513820.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:00.780Z,1520513820.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:01.179Z,1520513821.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:01.582Z,1520513821.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:01.981Z,1520513821.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:02.390Z,1520513822.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:02.791Z,1520513822.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:03.187Z,1520513823.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:03.582Z,1520513823.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:03.982Z,1520513823.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:04.380Z,1520513824.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:04.776Z,1520513824.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:05.187Z,1520513825.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:05.591Z,1520513825.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:05.987Z,1520513825.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:06.386Z,1520513826.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:06.777Z,1520513826.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:07.186Z,1520513827.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:07.575Z,1520513827.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:07.979Z,1520513827.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:08.388Z,1520513828.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:08.787Z,1520513828.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:09.187Z,1520513829.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:09.582Z,1520513829.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:09.980Z,1520513829.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:10.382Z,1520513830.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:10.777Z,1520513830.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:11.187Z,1520513831.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:11.594Z,1520513831.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:11.989Z,1520513831.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:12.376Z,1520513832.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:12.779Z,1520513832.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:13.182Z,1520513833.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:13.579Z,1520513833.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:13.980Z,1520513833.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:14.388Z,1520513834.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:14.788Z,1520513834.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:15.194Z,1520513835.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:15.587Z,1520513835.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:15.977Z,1520513835.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:16.384Z,1520513836.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:16.784Z,1520513836.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:17.187Z,1520513837.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:17.598Z,1520513837.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:17.993Z,1520513837.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:18.381Z,1520513838.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:18.785Z,1520513838.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:19.191Z,1520513839.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:19.576Z,1520513839.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:19.986Z,1520513839.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:20.400Z,1520513840.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:20.794Z,1520513840.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:21.194Z,1520513841.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:21.592Z,1520513841.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:21.985Z,1520513841.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:22.386Z,1520513842.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:22.791Z,1520513842.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:23.194Z,1520513843.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:23.602Z,1520513843.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:23.997Z,1520513843.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:24.387Z,1520513844.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:24.793Z,1520513844.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:28.027Z,1520513848.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:28.178Z,1520513848.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:28.535Z,1520513848.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:28.915Z,1520513848.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:29.314Z,1520513849.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:29.706Z,1520513849.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:30.109Z,1520513850.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:30.504Z,1520513850.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:30.914Z,1520513850.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:31.317Z,1520513851.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:31.716Z,1520513851.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:32.117Z,1520513852.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:32.511Z,1520513852.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:32.912Z,1520513852.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:33.313Z,1520513853.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:33.715Z,1520513853.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:34.118Z,1520513854.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:34.519Z,1520513854.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:34.915Z,1520513854.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:35.312Z,1520513855.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:35.715Z,1520513855.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:36.115Z,1520513856.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:36.511Z,1520513856.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:36.896Z,1520513856.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:37.314Z,1520513857.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:37.715Z,1520513857.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:38.122Z,1520513858.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:38.517Z,1520513858.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:38.898Z,1520513858.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:39.299Z,1520513859.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:39.702Z,1520513859.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:40.125Z,1520513860.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:40.522Z,1520513860.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:40.901Z,1520513860.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:41.299Z,1520513861.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:41.700Z,1520513861.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:42.101Z,1520513862.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:42.538Z,1520513862.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:42.903Z,1520513862.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:43.341Z,1520513863.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:43.711Z,1520513863.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:44.111Z,1520513864.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:44.510Z,1520513864.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:44.903Z,1520513864.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:45.303Z,1520513865.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:45.701Z,1520513865.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:46.122Z,1520513866.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:46.518Z,1520513866.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:46.915Z,1520513866.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:47.303Z,1520513867.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:47.707Z,1520513867.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:48.104Z,1520513868.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:48.503Z,1520513868.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:48.905Z,1520513868.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:49.319Z,1520513869.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:49.708Z,1520513869.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:50.114Z,1520513870.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:50.502Z,1520513870.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:50.910Z,1520513870.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:51.302Z,1520513871.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:51.700Z,1520513871.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:52.113Z,1520513872.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:52.515Z,1520513872.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:52.912Z,1520513872.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:53.301Z,1520513873.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:53.706Z,1520513873.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:54.107Z,1520513874.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:54.506Z,1520513874.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:54.903Z,1520513874.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:55.309Z,1520513875.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:55.718Z,1520513875.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:56.118Z,1520513876.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:56.503Z,1520513876.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:56.904Z,1520513876.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:57.315Z,1520513877.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:57.706Z,1520513877.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:58.116Z,1520513878.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:58.516Z,1520513878.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:58.917Z,1520513878.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:59.304Z,1520513879.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:57:59.709Z,1520513879.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:00.104Z,1520513880.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:00.504Z,1520513880.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:00.907Z,1520513880.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:01.316Z,1520513881.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:01.722Z,1520513881.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:02.118Z,1520513882.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:02.507Z,1520513882.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:02.904Z,1520513882.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:03.307Z,1520513883.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:03.706Z,1520513883.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:04.131Z,1520513884.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:04.516Z,1520513884.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:04.909Z,1520513884.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:05.306Z,1520513885.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:05.702Z,1520513885.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:06.106Z,1520513886.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:06.505Z,1520513886.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:06.903Z,1520513886.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:07.310Z,1520513887.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:07.716Z,1520513887.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:08.111Z,1520513888.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:08.506Z,1520513888.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:08.910Z,1520513888.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:09.308Z,1520513889.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:09.707Z,1520513889.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:10.115Z,1520513890.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:10.512Z,1520513890.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:10.916Z,1520513890.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:11.303Z,1520513891.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:11.703Z,1520513891.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:12.110Z,1520513892.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:12.504Z,1520513892.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:12.910Z,1520513892.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:13.319Z,1520513893.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:13.716Z,1520513893.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:14.112Z,1520513894.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:14.513Z,1520513894.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:14.907Z,1520513894.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:15.309Z,1520513895.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:15.717Z,1520513895.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:16.117Z,1520513896.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:16.521Z,1520513896.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:16.921Z,1520513896.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:17.291Z,1520513897.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:17.695Z,1520513897.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:18.125Z,1520513898.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:18.494Z,1520513898.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:18.918Z,1520513898.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:19.327Z,1520513899.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:19.699Z,1520513899.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:20.121Z,1520513900.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:20.501Z,1520513900.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:20.900Z,1520513900.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:21.302Z,1520513901.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:21.703Z,1520513901.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:22.100Z,1520513902.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:22.512Z,1520513902.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:22.908Z,1520513902.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:23.302Z,1520513903.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:23.699Z,1520513903.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:24.097Z,1520513904.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:24.502Z,1520513904.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:24.900Z,1520513904.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:28.040Z,1520513908.040 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:28.040Z,1520513908.040 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 105
2018-03-08T12:58:28.040Z,1520513908.040 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T12:58:28.042Z,1520513908.042 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:28.042Z,1520513908.042 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 105
2018-03-08T12:58:28.042Z,1520513908.042 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T12:58:28.044Z,1520513908.044 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:28.044Z,1520513908.044 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 105
2018-03-08T12:58:28.044Z,1520513908.044 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T12:58:28.055Z,1520513908.055 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T12:58:28.056Z,1520513908.056 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T12:58:28.056Z,1520513908.056 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T12:58:28.213Z,1520513908.213 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T12:58:28.213Z,1520513908.213 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 105
2018-03-08T12:58:28.213Z,1520513908.213 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T12:58:28.213Z,1520513908.213 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 105
2018-03-08T12:58:28.214Z,1520513908.214 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T12:58:28.214Z,1520513908.214 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 105
2018-03-08T12:58:28.546Z,1520513908.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T12:58:28.547Z,1520513908.547 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:58:28.547Z,1520513908.547 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:58:28.547Z,1520513908.547 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T12:58:28.548Z,1520513908.548 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:58:28.548Z,1520513908.548 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:58:28.549Z,1520513908.549 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T12:58:28.549Z,1520513908.549 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T12:58:28.549Z,1520513908.549 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T12:58:28.914Z,1520513908.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-03-08T12:58:28.915Z,1520513908.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:29.322Z,1520513909.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-03-08T12:58:29.323Z,1520513909.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:29.718Z,1520513909.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-03-08T12:58:29.719Z,1520513909.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:30.119Z,1520513910.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-03-08T12:58:30.120Z,1520513910.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:30.526Z,1520513910.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-03-08T12:58:30.527Z,1520513910.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:30.920Z,1520513910.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-03-08T12:58:30.921Z,1520513910.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:31.314Z,1520513911.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-03-08T12:58:31.315Z,1520513911.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:31.713Z,1520513911.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-08T12:58:31.713Z,1520513911.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:32.113Z,1520513912.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-03-08T12:58:32.114Z,1520513912.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:32.521Z,1520513912.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-03-08T12:58:32.521Z,1520513912.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:32.914Z,1520513912.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-08T12:58:32.915Z,1520513912.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:33.320Z,1520513913.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-08T12:58:33.321Z,1520513913.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:33.719Z,1520513913.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T12:58:33.720Z,1520513913.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:34.124Z,1520513914.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T12:58:34.125Z,1520513914.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:34.519Z,1520513914.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-08T12:58:34.520Z,1520513914.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:34.918Z,1520513914.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-08T12:58:34.919Z,1520513914.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:35.317Z,1520513915.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-08T12:58:35.318Z,1520513915.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:35.720Z,1520513915.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-08T12:58:35.721Z,1520513915.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:36.120Z,1520513916.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-08T12:58:36.121Z,1520513916.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:36.525Z,1520513916.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-08T12:58:36.526Z,1520513916.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:36.920Z,1520513916.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-08T12:58:36.921Z,1520513916.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:37.318Z,1520513917.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-08T12:58:37.319Z,1520513917.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:37.712Z,1520513917.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-08T12:58:37.713Z,1520513917.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:38.118Z,1520513918.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T12:58:38.119Z,1520513918.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:38.514Z,1520513918.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-08T12:58:38.515Z,1520513918.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:38.911Z,1520513918.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T12:58:38.912Z,1520513918.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:39.332Z,1520513919.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T12:58:39.353Z,1520513919.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:39.722Z,1520513919.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T12:58:39.723Z,1520513919.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:40.122Z,1520513920.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T12:58:40.123Z,1520513920.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:40.519Z,1520513920.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T12:58:40.520Z,1520513920.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:40.914Z,1520513920.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-08T12:58:40.915Z,1520513920.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:41.316Z,1520513921.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-08T12:58:41.317Z,1520513921.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:41.712Z,1520513921.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-08T12:58:41.713Z,1520513921.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:42.124Z,1520513922.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-08T12:58:42.125Z,1520513922.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:42.526Z,1520513922.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-08T12:58:42.527Z,1520513922.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:42.926Z,1520513922.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T12:58:42.927Z,1520513922.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:43.313Z,1520513923.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-08T12:58:43.314Z,1520513923.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:43.714Z,1520513923.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T12:58:43.715Z,1520513923.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:44.121Z,1520513924.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T12:58:44.121Z,1520513924.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:44.518Z,1520513924.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T12:58:44.519Z,1520513924.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:44.918Z,1520513924.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T12:58:44.919Z,1520513924.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:45.326Z,1520513925.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-08T12:58:45.327Z,1520513925.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:45.722Z,1520513925.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T12:58:45.723Z,1520513925.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:46.123Z,1520513926.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-08T12:58:46.124Z,1520513926.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:46.512Z,1520513926.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-08T12:58:46.513Z,1520513926.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:46.913Z,1520513926.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T12:58:46.914Z,1520513926.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:47.312Z,1520513927.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T12:58:47.313Z,1520513927.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:47.722Z,1520513927.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T12:58:47.723Z,1520513927.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:48.123Z,1520513928.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:48.526Z,1520513928.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:48.923Z,1520513928.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:49.317Z,1520513929.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:49.711Z,1520513929.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:50.117Z,1520513930.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:50.514Z,1520513930.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:50.915Z,1520513930.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:51.323Z,1520513931.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:51.724Z,1520513931.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:52.126Z,1520513932.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:52.522Z,1520513932.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:52.918Z,1520513932.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:53.320Z,1520513933.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:53.721Z,1520513933.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:54.123Z,1520513934.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:54.524Z,1520513934.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:54.924Z,1520513934.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:55.315Z,1520513935.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:55.714Z,1520513935.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:56.122Z,1520513936.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:56.521Z,1520513936.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:56.914Z,1520513936.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:57.324Z,1520513937.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:57.723Z,1520513937.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:58.135Z,1520513938.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:58.526Z,1520513938.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:58.918Z,1520513938.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:59.319Z,1520513939.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:58:59.719Z,1520513939.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:00.128Z,1520513940.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:00.530Z,1520513940.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:00.927Z,1520513940.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:01.321Z,1520513941.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:01.719Z,1520513941.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:02.120Z,1520513942.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:02.514Z,1520513942.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:02.913Z,1520513942.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:03.335Z,1520513943.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:03.727Z,1520513943.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:04.124Z,1520513944.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:04.518Z,1520513944.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:04.921Z,1520513944.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:05.320Z,1520513945.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:05.721Z,1520513945.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:06.124Z,1520513946.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:06.527Z,1520513946.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:06.931Z,1520513946.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:07.317Z,1520513947.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:07.722Z,1520513947.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:08.121Z,1520513948.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:08.522Z,1520513948.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:08.899Z,1520513948.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:09.328Z,1520513949.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:09.729Z,1520513949.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:10.128Z,1520513950.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:10.525Z,1520513950.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:10.927Z,1520513950.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:11.325Z,1520513951.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:11.725Z,1520513951.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:12.130Z,1520513952.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:12.529Z,1520513952.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:12.936Z,1520513952.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:13.327Z,1520513953.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:13.699Z,1520513953.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:14.130Z,1520513954.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:14.507Z,1520513954.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:14.904Z,1520513954.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:15.339Z,1520513955.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:15.732Z,1520513955.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:16.131Z,1520513956.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:16.534Z,1520513956.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:16.939Z,1520513956.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:17.310Z,1520513957.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:17.739Z,1520513957.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:18.135Z,1520513958.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:18.516Z,1520513958.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:18.937Z,1520513958.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:19.345Z,1520513959.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:19.714Z,1520513959.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:20.110Z,1520513960.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:20.545Z,1520513960.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:20.911Z,1520513960.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:21.339Z,1520513961.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:21.742Z,1520513961.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:22.120Z,1520513962.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:22.515Z,1520513962.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:22.911Z,1520513962.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:23.313Z,1520513963.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:23.720Z,1520513963.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:24.149Z,1520513964.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:24.516Z,1520513964.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:24.950Z,1520513964.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:28.026Z,1520513968.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:28.136Z,1520513968.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:28.559Z,1520513968.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:28.959Z,1520513968.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:29.357Z,1520513969.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:29.735Z,1520513969.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:30.131Z,1520513970.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:30.532Z,1520513970.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:30.935Z,1520513970.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:31.363Z,1520513971.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:31.759Z,1520513971.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:32.162Z,1520513972.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:32.536Z,1520513972.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:32.935Z,1520513972.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:33.336Z,1520513973.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:33.744Z,1520513973.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:34.146Z,1520513974.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:34.550Z,1520513974.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:34.950Z,1520513974.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:35.339Z,1520513975.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:35.734Z,1520513975.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:36.143Z,1520513976.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:36.539Z,1520513976.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:36.937Z,1520513976.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:37.353Z,1520513977.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:37.748Z,1520513977.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:38.153Z,1520513978.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:38.540Z,1520513978.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:38.931Z,1520513978.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:39.344Z,1520513979.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:39.743Z,1520513979.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:40.154Z,1520513980.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:40.558Z,1520513980.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:40.951Z,1520513980.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:41.336Z,1520513981.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:41.736Z,1520513981.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:42.143Z,1520513982.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:42.540Z,1520513982.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:42.946Z,1520513982.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:43.346Z,1520513983.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:43.755Z,1520513983.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:44.149Z,1520513984.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:44.549Z,1520513984.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:44.946Z,1520513984.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:45.345Z,1520513985.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:45.745Z,1520513985.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:46.158Z,1520513986.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:46.553Z,1520513986.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:46.959Z,1520513986.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:47.349Z,1520513987.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:47.750Z,1520513987.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:48.125Z,1520513988.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:48.526Z,1520513988.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:48.959Z,1520513988.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:49.357Z,1520513989.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:49.757Z,1520513989.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:50.158Z,1520513990.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:50.529Z,1520513990.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:50.935Z,1520513990.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:51.335Z,1520513991.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:51.736Z,1520513991.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:52.159Z,1520513992.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:52.554Z,1520513992.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:52.961Z,1520513992.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:53.331Z,1520513993.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:53.735Z,1520513993.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:54.130Z,1520513994.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:54.534Z,1520513994.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:54.936Z,1520513994.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:55.358Z,1520513995.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:55.758Z,1520513995.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:56.153Z,1520513996.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:56.531Z,1520513996.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:56.934Z,1520513996.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:57.362Z,1520513997.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:57.735Z,1520513997.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:58.165Z,1520513998.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:58.541Z,1520513998.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:58.946Z,1520513998.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:59.336Z,1520513999.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T12:59:59.734Z,1520513999.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:00.142Z,1520514000.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:00.537Z,1520514000.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:00.934Z,1520514000.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:01.345Z,1520514001.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:01.741Z,1520514001.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:02.169Z,1520514002.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:02.538Z,1520514002.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:02.939Z,1520514002.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:03.337Z,1520514003.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:03.739Z,1520514003.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:04.144Z,1520514004.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:04.543Z,1520514004.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:04.944Z,1520514004.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:05.340Z,1520514005.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:05.732Z,1520514005.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:06.142Z,1520514006.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:06.538Z,1520514006.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:06.938Z,1520514006.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:07.344Z,1520514007.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:07.750Z,1520514007.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:08.150Z,1520514008.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:08.538Z,1520514008.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:08.938Z,1520514008.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:09.337Z,1520514009.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:09.745Z,1520514009.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:10.151Z,1520514010.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:10.550Z,1520514010.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:10.944Z,1520514010.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:11.339Z,1520514011.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:11.742Z,1520514011.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:12.138Z,1520514012.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:12.538Z,1520514012.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:12.939Z,1520514012.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:13.345Z,1520514013.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:13.744Z,1520514013.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:14.144Z,1520514014.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:14.547Z,1520514014.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:14.937Z,1520514014.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:15.337Z,1520514015.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:15.740Z,1520514015.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:16.149Z,1520514016.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:16.551Z,1520514016.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:16.955Z,1520514016.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:17.338Z,1520514017.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:17.743Z,1520514017.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:18.138Z,1520514018.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:18.542Z,1520514018.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:18.940Z,1520514018.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:19.340Z,1520514019.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:19.750Z,1520514019.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:20.148Z,1520514020.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:20.539Z,1520514020.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:20.942Z,1520514020.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:21.342Z,1520514021.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:21.738Z,1520514021.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:22.149Z,1520514022.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:22.551Z,1520514022.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:22.949Z,1520514022.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:23.343Z,1520514023.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:23.739Z,1520514023.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:24.139Z,1520514024.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:24.535Z,1520514024.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:24.538Z,1520514024.538 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T13:00:24.539Z,1520514024.539 [Default:CheckIn:C.Wait] Stopped
2018-03-08T13:00:24.539Z,1520514024.539 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T13:00:24.539Z,1520514024.539 [Default:CheckIn:D] Running Loop=1
2018-03-08T13:00:24.950Z,1520514024.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:24.954Z,1520514024.954 [Default:CheckIn:D] Stopped
2018-03-08T13:00:24.954Z,1520514024.954 [Default:CheckIn:E] Running Loop=1
2018-03-08T13:00:28.053Z,1520514028.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:28.057Z,1520514028.057 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 314.669141 min 
2018-03-08T13:00:28.057Z,1520514028.057 [Default:CheckIn:E] Stopped
2018-03-08T13:00:28.057Z,1520514028.057 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T13:00:28.057Z,1520514028.057 [Default:CheckIn] Stopped
2018-03-08T13:00:28.057Z,1520514028.057 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T13:00:28.057Z,1520514028.057 [Default:CheckIn](INFO): Running loop #31
2018-03-08T13:00:28.057Z,1520514028.057 [Default:CheckIn] Running Loop=31
2018-03-08T13:00:28.058Z,1520514028.058 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T13:00:28.058Z,1520514028.058 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T13:00:28.204Z,1520514028.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:28.588Z,1520514028.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:28.966Z,1520514028.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:29.364Z,1520514029.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:29.766Z,1520514029.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:30.136Z,1520514030.136 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T13:00:30.136Z,1520514030.136 [NAL9602] Data Fault, FailCount= 5
2018-03-08T13:00:30.136Z,1520514030.136 [NAL9602](ERROR): Data Fault
2018-03-08T13:00:30.168Z,1520514030.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:30.217Z,1520514030.217 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T13:00:30.217Z,1520514030.217 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-08T13:00:30.522Z,1520514030.522 [NAL9602](INFO): Powering down
2018-03-08T13:00:30.569Z,1520514030.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:30.592Z,1520514030.592 [CBIT](INFO): Critical error at 20180308T130030
2018-03-08T13:00:30.974Z,1520514030.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:31.361Z,1520514031.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:31.760Z,1520514031.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:32.174Z,1520514032.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:32.567Z,1520514032.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:32.959Z,1520514032.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:33.364Z,1520514033.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:33.767Z,1520514033.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:34.162Z,1520514034.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:34.563Z,1520514034.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:34.967Z,1520514034.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:35.361Z,1520514035.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:35.768Z,1520514035.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:36.174Z,1520514036.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:36.566Z,1520514036.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:36.967Z,1520514036.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:37.367Z,1520514037.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:37.759Z,1520514037.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:38.169Z,1520514038.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:38.561Z,1520514038.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:38.962Z,1520514038.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:39.367Z,1520514039.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:39.759Z,1520514039.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:40.167Z,1520514040.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:40.567Z,1520514040.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:40.965Z,1520514040.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:41.361Z,1520514041.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:41.764Z,1520514041.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:42.169Z,1520514042.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:42.564Z,1520514042.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:42.978Z,1520514042.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:43.369Z,1520514043.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:43.764Z,1520514043.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:44.167Z,1520514044.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:44.564Z,1520514044.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:44.969Z,1520514044.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:45.367Z,1520514045.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:45.770Z,1520514045.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:46.169Z,1520514046.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:46.574Z,1520514046.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:46.965Z,1520514046.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:47.371Z,1520514047.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:47.770Z,1520514047.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:48.167Z,1520514048.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:48.568Z,1520514048.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:48.967Z,1520514048.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:49.372Z,1520514049.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:49.767Z,1520514049.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:50.171Z,1520514050.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:50.570Z,1520514050.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:50.959Z,1520514050.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:51.370Z,1520514051.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:51.779Z,1520514051.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:52.155Z,1520514052.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:52.559Z,1520514052.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:52.958Z,1520514052.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:53.355Z,1520514053.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:53.782Z,1520514053.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:54.185Z,1520514054.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:54.556Z,1520514054.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:54.963Z,1520514054.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:55.365Z,1520514055.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:55.758Z,1520514055.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:56.162Z,1520514056.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:56.562Z,1520514056.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:56.954Z,1520514056.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:57.366Z,1520514057.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:57.762Z,1520514057.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:58.158Z,1520514058.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:58.564Z,1520514058.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:58.972Z,1520514058.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:59.362Z,1520514059.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:00:59.763Z,1520514059.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:00.160Z,1520514060.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:00.561Z,1520514060.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:00.970Z,1520514060.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:01.362Z,1520514061.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:01.761Z,1520514061.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:02.164Z,1520514062.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:02.561Z,1520514062.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:02.961Z,1520514062.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:03.366Z,1520514063.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:03.766Z,1520514063.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:04.162Z,1520514064.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:04.564Z,1520514064.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:04.961Z,1520514064.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:05.362Z,1520514065.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:05.766Z,1520514065.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:06.163Z,1520514066.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:06.562Z,1520514066.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:06.966Z,1520514066.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:07.366Z,1520514067.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:07.762Z,1520514067.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:08.166Z,1520514068.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:08.567Z,1520514068.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:08.960Z,1520514068.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:09.366Z,1520514069.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:09.767Z,1520514069.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:10.163Z,1520514070.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:10.566Z,1520514070.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:10.962Z,1520514070.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:11.359Z,1520514071.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:11.766Z,1520514071.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:12.169Z,1520514072.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:12.562Z,1520514072.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:12.965Z,1520514072.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:13.364Z,1520514073.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:13.760Z,1520514073.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:14.164Z,1520514074.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:14.567Z,1520514074.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:14.958Z,1520514074.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:15.366Z,1520514075.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:15.766Z,1520514075.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:16.165Z,1520514076.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:16.566Z,1520514076.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:16.966Z,1520514076.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:17.358Z,1520514077.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:17.766Z,1520514077.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:18.166Z,1520514078.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:18.598Z,1520514078.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:18.966Z,1520514078.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:19.374Z,1520514079.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:19.758Z,1520514079.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:20.166Z,1520514080.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:20.568Z,1520514080.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:20.958Z,1520514080.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:21.366Z,1520514081.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:21.770Z,1520514081.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:22.166Z,1520514082.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:22.566Z,1520514082.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:22.970Z,1520514082.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:23.363Z,1520514083.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:23.764Z,1520514083.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:24.167Z,1520514084.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:24.563Z,1520514084.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:24.964Z,1520514084.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:28.066Z,1520514088.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:28.194Z,1520514088.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:28.549Z,1520514088.549 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:28.549Z,1520514088.549 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 106
2018-03-08T13:01:28.549Z,1520514088.549 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T13:01:28.551Z,1520514088.551 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:28.551Z,1520514088.551 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 106
2018-03-08T13:01:28.551Z,1520514088.551 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T13:01:28.553Z,1520514088.553 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:28.553Z,1520514088.553 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 106
2018-03-08T13:01:28.553Z,1520514088.553 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T13:01:28.565Z,1520514088.565 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T13:01:28.565Z,1520514088.565 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T13:01:28.566Z,1520514088.566 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T13:01:28.960Z,1520514088.960 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T13:01:28.960Z,1520514088.960 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 106
2018-03-08T13:01:28.960Z,1520514088.960 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T13:01:28.960Z,1520514088.960 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 106
2018-03-08T13:01:28.965Z,1520514088.965 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T13:01:28.965Z,1520514088.965 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 106
2018-03-08T13:01:29.336Z,1520514089.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T13:01:29.357Z,1520514089.357 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:01:29.357Z,1520514089.357 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:01:29.357Z,1520514089.357 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T13:01:29.358Z,1520514089.358 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:01:29.358Z,1520514089.358 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:01:29.359Z,1520514089.359 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T13:01:29.359Z,1520514089.359 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:01:29.359Z,1520514089.359 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:01:29.739Z,1520514089.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T13:01:29.739Z,1520514089.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:30.137Z,1520514090.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T13:01:30.138Z,1520514090.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:30.539Z,1520514090.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T13:01:30.540Z,1520514090.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:30.939Z,1520514090.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T13:01:30.940Z,1520514090.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:31.339Z,1520514091.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T13:01:31.340Z,1520514091.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:31.738Z,1520514091.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T13:01:31.739Z,1520514091.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:32.137Z,1520514092.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T13:01:32.138Z,1520514092.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:32.544Z,1520514092.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T13:01:32.549Z,1520514092.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:32.941Z,1520514092.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T13:01:32.942Z,1520514092.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:33.341Z,1520514093.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T13:01:33.342Z,1520514093.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:33.738Z,1520514093.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T13:01:33.739Z,1520514093.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:34.140Z,1520514094.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T13:01:34.141Z,1520514094.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:34.535Z,1520514094.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T13:01:34.536Z,1520514094.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:34.934Z,1520514094.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T13:01:34.935Z,1520514094.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:35.337Z,1520514095.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T13:01:35.338Z,1520514095.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:35.739Z,1520514095.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T13:01:35.740Z,1520514095.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:36.133Z,1520514096.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T13:01:36.134Z,1520514096.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:36.536Z,1520514096.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T13:01:36.537Z,1520514096.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:36.939Z,1520514096.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T13:01:36.939Z,1520514096.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:37.340Z,1520514097.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T13:01:37.341Z,1520514097.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:37.741Z,1520514097.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T13:01:37.742Z,1520514097.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:38.140Z,1520514098.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T13:01:38.141Z,1520514098.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:38.540Z,1520514098.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T13:01:38.541Z,1520514098.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:38.940Z,1520514098.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T13:01:38.941Z,1520514098.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:39.338Z,1520514099.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T13:01:39.339Z,1520514099.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:39.742Z,1520514099.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T13:01:39.743Z,1520514099.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:40.140Z,1520514100.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T13:01:40.141Z,1520514100.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:40.539Z,1520514100.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T13:01:40.539Z,1520514100.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:40.933Z,1520514100.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T13:01:40.934Z,1520514100.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:41.336Z,1520514101.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T13:01:41.337Z,1520514101.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:41.736Z,1520514101.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T13:01:41.737Z,1520514101.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:42.140Z,1520514102.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T13:01:42.141Z,1520514102.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:42.541Z,1520514102.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T13:01:42.542Z,1520514102.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:42.938Z,1520514102.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T13:01:42.939Z,1520514102.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:43.340Z,1520514103.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T13:01:43.341Z,1520514103.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:43.736Z,1520514103.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T13:01:43.737Z,1520514103.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:44.139Z,1520514104.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T13:01:44.140Z,1520514104.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:44.534Z,1520514104.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T13:01:44.535Z,1520514104.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:44.941Z,1520514104.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T13:01:44.942Z,1520514104.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:45.337Z,1520514105.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T13:01:45.338Z,1520514105.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:45.734Z,1520514105.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T13:01:45.735Z,1520514105.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:46.141Z,1520514106.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T13:01:46.141Z,1520514106.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:46.543Z,1520514106.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T13:01:46.544Z,1520514106.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:46.934Z,1520514106.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T13:01:46.935Z,1520514106.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:47.333Z,1520514107.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T13:01:47.334Z,1520514107.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:47.348Z,1520514107.348 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T13:01:47.743Z,1520514107.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T13:01:47.744Z,1520514107.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:48.141Z,1520514108.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T13:01:48.142Z,1520514108.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:48.537Z,1520514108.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T13:01:48.538Z,1520514108.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:48.937Z,1520514108.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:49.342Z,1520514109.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:49.741Z,1520514109.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:50.139Z,1520514110.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:50.532Z,1520514110.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:50.941Z,1520514110.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:51.337Z,1520514111.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:51.759Z,1520514111.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:52.131Z,1520514112.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:52.532Z,1520514112.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:52.923Z,1520514112.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:53.334Z,1520514113.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:53.737Z,1520514113.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:54.130Z,1520514114.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:54.538Z,1520514114.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:54.939Z,1520514114.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:55.329Z,1520514115.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:55.738Z,1520514115.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:56.137Z,1520514116.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:56.566Z,1520514116.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:56.939Z,1520514116.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:57.342Z,1520514117.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:57.732Z,1520514117.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:58.139Z,1520514118.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:58.539Z,1520514118.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:58.930Z,1520514118.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:59.339Z,1520514119.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:01:59.735Z,1520514119.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:00.135Z,1520514120.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:00.541Z,1520514120.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:00.939Z,1520514120.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:01.334Z,1520514121.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:01.739Z,1520514121.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:02.139Z,1520514122.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:02.535Z,1520514122.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:02.934Z,1520514122.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:03.339Z,1520514123.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:03.735Z,1520514123.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:04.135Z,1520514124.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:04.539Z,1520514124.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:04.938Z,1520514124.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:05.346Z,1520514125.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:05.740Z,1520514125.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:06.139Z,1520514126.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:06.539Z,1520514126.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:06.939Z,1520514126.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:07.339Z,1520514127.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:07.739Z,1520514127.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:08.139Z,1520514128.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:08.537Z,1520514128.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:08.934Z,1520514128.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:09.338Z,1520514129.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:09.739Z,1520514129.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:10.144Z,1520514130.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:10.541Z,1520514130.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:10.939Z,1520514130.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:11.342Z,1520514131.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:11.750Z,1520514131.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:12.141Z,1520514132.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:12.537Z,1520514132.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:12.940Z,1520514132.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:13.350Z,1520514133.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:13.735Z,1520514133.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:14.139Z,1520514134.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:14.538Z,1520514134.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:14.936Z,1520514134.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:15.348Z,1520514135.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:15.740Z,1520514135.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:16.141Z,1520514136.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:16.545Z,1520514136.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:16.936Z,1520514136.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:17.342Z,1520514137.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:17.739Z,1520514137.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:18.139Z,1520514138.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:18.543Z,1520514138.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:18.941Z,1520514138.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:19.339Z,1520514139.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:19.743Z,1520514139.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:20.143Z,1520514140.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:20.539Z,1520514140.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:20.945Z,1520514140.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:21.345Z,1520514141.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:21.739Z,1520514141.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:22.142Z,1520514142.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:22.538Z,1520514142.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:22.940Z,1520514142.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:23.342Z,1520514143.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:23.738Z,1520514143.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:24.139Z,1520514144.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:24.535Z,1520514144.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:24.946Z,1520514144.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:25.351Z,1520514145.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:28.446Z,1520514148.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:28.595Z,1520514148.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:28.999Z,1520514148.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:29.357Z,1520514149.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:29.767Z,1520514149.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:30.165Z,1520514150.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:30.178Z,1520514150.178 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T13:02:30.178Z,1520514150.178 [NAL9602] No Fault, FailCount= 5
2018-03-08T13:02:30.519Z,1520514150.519 [NAL9602](INFO): Powering up NAL9602
2018-03-08T13:02:30.565Z,1520514150.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:30.964Z,1520514150.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:31.366Z,1520514151.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:31.761Z,1520514151.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:32.166Z,1520514152.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:32.565Z,1520514152.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:32.959Z,1520514152.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:33.368Z,1520514153.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:33.767Z,1520514153.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:34.166Z,1520514154.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:34.566Z,1520514154.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:34.961Z,1520514154.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:35.361Z,1520514155.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:35.764Z,1520514155.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:36.161Z,1520514156.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:36.560Z,1520514156.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:36.963Z,1520514156.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:37.361Z,1520514157.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:37.760Z,1520514157.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:38.163Z,1520514158.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:38.562Z,1520514158.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:38.960Z,1520514158.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:39.363Z,1520514159.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:39.765Z,1520514159.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:40.165Z,1520514160.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:40.567Z,1520514160.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:40.978Z,1520514160.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:41.326Z,1520514161.326 [NAL9602](INFO): NAL9602 initialized
2018-03-08T13:02:41.370Z,1520514161.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:41.774Z,1520514161.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:42.179Z,1520514162.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:42.572Z,1520514162.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:42.979Z,1520514162.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:43.367Z,1520514163.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:43.769Z,1520514163.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:44.167Z,1520514164.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:44.581Z,1520514164.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:44.979Z,1520514164.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:45.382Z,1520514165.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:45.766Z,1520514165.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:46.170Z,1520514166.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:46.570Z,1520514166.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:46.966Z,1520514166.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:47.378Z,1520514167.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:47.779Z,1520514167.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:48.173Z,1520514168.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:48.566Z,1520514168.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:48.978Z,1520514168.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:49.376Z,1520514169.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:49.780Z,1520514169.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:50.184Z,1520514170.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:50.555Z,1520514170.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:50.962Z,1520514170.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:51.388Z,1520514171.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:51.788Z,1520514171.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:52.171Z,1520514172.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:52.571Z,1520514172.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:52.964Z,1520514172.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:53.365Z,1520514173.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:53.793Z,1520514173.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:54.169Z,1520514174.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:54.566Z,1520514174.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:54.964Z,1520514174.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:55.370Z,1520514175.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:55.768Z,1520514175.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:56.168Z,1520514176.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:56.571Z,1520514176.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:56.966Z,1520514176.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:57.368Z,1520514177.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:57.773Z,1520514177.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:58.168Z,1520514178.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:58.572Z,1520514178.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:58.966Z,1520514178.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:59.375Z,1520514179.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:02:59.774Z,1520514179.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:00.168Z,1520514180.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:00.559Z,1520514180.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:00.966Z,1520514180.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:01.375Z,1520514181.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:01.772Z,1520514181.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:02.172Z,1520514182.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:02.568Z,1520514182.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:02.962Z,1520514182.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:03.381Z,1520514183.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:03.772Z,1520514183.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:04.167Z,1520514184.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:04.568Z,1520514184.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:04.971Z,1520514184.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:05.376Z,1520514185.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:05.790Z,1520514185.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:06.173Z,1520514186.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:06.587Z,1520514186.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:06.967Z,1520514186.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:07.373Z,1520514187.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:07.767Z,1520514187.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:08.174Z,1520514188.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:08.572Z,1520514188.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:08.954Z,1520514188.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:09.365Z,1520514189.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:09.773Z,1520514189.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:10.168Z,1520514190.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:10.586Z,1520514190.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:10.976Z,1520514190.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:11.379Z,1520514191.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:11.786Z,1520514191.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:12.183Z,1520514192.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:12.569Z,1520514192.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:12.974Z,1520514192.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:13.382Z,1520514193.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:13.780Z,1520514193.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:14.179Z,1520514194.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:14.571Z,1520514194.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:14.966Z,1520514194.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:15.377Z,1520514195.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:15.786Z,1520514195.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:16.178Z,1520514196.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:16.576Z,1520514196.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:16.974Z,1520514196.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:17.382Z,1520514197.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:17.786Z,1520514197.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:18.178Z,1520514198.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:18.570Z,1520514198.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:18.978Z,1520514198.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:19.386Z,1520514199.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:19.772Z,1520514199.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:20.246Z,1520514200.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:20.577Z,1520514200.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:20.987Z,1520514200.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:21.383Z,1520514201.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:21.780Z,1520514201.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:22.181Z,1520514202.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:22.562Z,1520514202.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:22.956Z,1520514202.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:23.381Z,1520514203.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:23.783Z,1520514203.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:24.189Z,1520514204.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:24.559Z,1520514204.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:24.958Z,1520514204.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:25.384Z,1520514205.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:28.460Z,1520514208.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:28.589Z,1520514208.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:28.957Z,1520514208.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:29.358Z,1520514209.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:29.761Z,1520514209.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:30.154Z,1520514210.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:30.561Z,1520514210.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:30.960Z,1520514210.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:31.362Z,1520514211.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:31.755Z,1520514211.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:32.158Z,1520514212.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:32.558Z,1520514212.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:32.957Z,1520514212.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:33.371Z,1520514213.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:33.770Z,1520514213.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:34.163Z,1520514214.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:34.553Z,1520514214.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:34.961Z,1520514214.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:35.369Z,1520514215.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:35.765Z,1520514215.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:36.164Z,1520514216.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:36.555Z,1520514216.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:36.960Z,1520514216.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:37.368Z,1520514217.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:37.771Z,1520514217.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:38.169Z,1520514218.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:38.559Z,1520514218.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:38.959Z,1520514218.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:39.362Z,1520514219.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:39.779Z,1520514219.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:40.174Z,1520514220.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:40.559Z,1520514220.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:40.961Z,1520514220.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:41.375Z,1520514221.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:41.761Z,1520514221.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:42.166Z,1520514222.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:42.559Z,1520514222.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:42.963Z,1520514222.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:43.369Z,1520514223.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:43.770Z,1520514223.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:44.170Z,1520514224.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:44.559Z,1520514224.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:44.962Z,1520514224.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:45.370Z,1520514225.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:45.769Z,1520514225.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:46.170Z,1520514226.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:46.560Z,1520514226.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:46.966Z,1520514226.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:47.369Z,1520514227.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:47.767Z,1520514227.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:48.175Z,1520514228.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:48.563Z,1520514228.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:48.940Z,1520514228.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:49.375Z,1520514229.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:49.778Z,1520514229.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:50.170Z,1520514230.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:50.559Z,1520514230.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:50.988Z,1520514230.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:51.367Z,1520514231.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:51.776Z,1520514231.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:52.224Z,1520514232.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:52.540Z,1520514232.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:52.963Z,1520514232.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:53.366Z,1520514233.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:53.757Z,1520514233.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:54.155Z,1520514234.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:54.566Z,1520514234.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:54.969Z,1520514234.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:55.365Z,1520514235.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:55.769Z,1520514235.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:56.161Z,1520514236.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:56.567Z,1520514236.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:56.967Z,1520514236.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:57.362Z,1520514237.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:57.769Z,1520514237.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:58.170Z,1520514238.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:58.563Z,1520514238.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:58.966Z,1520514238.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:59.377Z,1520514239.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:03:59.779Z,1520514239.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:00.171Z,1520514240.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:00.569Z,1520514240.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:00.965Z,1520514240.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:01.369Z,1520514241.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:01.773Z,1520514241.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:02.174Z,1520514242.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:02.565Z,1520514242.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:02.971Z,1520514242.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:03.371Z,1520514243.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:03.779Z,1520514243.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:04.173Z,1520514244.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:04.547Z,1520514244.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:04.970Z,1520514244.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:05.376Z,1520514245.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:05.775Z,1520514245.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:06.176Z,1520514246.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:06.563Z,1520514246.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:06.957Z,1520514246.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:07.359Z,1520514247.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:07.770Z,1520514247.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:08.170Z,1520514248.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:08.559Z,1520514248.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:08.962Z,1520514248.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:09.370Z,1520514249.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:09.769Z,1520514249.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:10.209Z,1520514250.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:10.570Z,1520514250.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:10.967Z,1520514250.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:11.371Z,1520514251.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:11.769Z,1520514251.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:12.168Z,1520514252.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:12.566Z,1520514252.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:12.961Z,1520514252.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:13.365Z,1520514253.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:13.769Z,1520514253.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:14.169Z,1520514254.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:14.555Z,1520514254.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:14.968Z,1520514254.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:15.369Z,1520514255.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:15.776Z,1520514255.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:16.174Z,1520514256.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:16.587Z,1520514256.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:16.963Z,1520514256.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:17.372Z,1520514257.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:17.778Z,1520514257.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:18.179Z,1520514258.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:18.594Z,1520514258.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:18.955Z,1520514258.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:19.377Z,1520514259.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:19.777Z,1520514259.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:20.187Z,1520514260.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:20.552Z,1520514260.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:20.959Z,1520514260.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:21.382Z,1520514261.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:21.783Z,1520514261.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:22.156Z,1520514262.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:22.556Z,1520514262.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:22.955Z,1520514262.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:23.357Z,1520514263.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:23.782Z,1520514263.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:24.183Z,1520514264.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:24.582Z,1520514264.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:24.961Z,1520514264.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:25.404Z,1520514265.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:25.764Z,1520514265.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:29.233Z,1520514269.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:29.379Z,1520514269.379 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:29.379Z,1520514269.379 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 107
2018-03-08T13:04:29.379Z,1520514269.379 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T13:04:29.389Z,1520514269.389 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:29.389Z,1520514269.389 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 107
2018-03-08T13:04:29.389Z,1520514269.389 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T13:04:29.391Z,1520514269.391 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:29.391Z,1520514269.391 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 107
2018-03-08T13:04:29.391Z,1520514269.391 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T13:04:29.436Z,1520514269.436 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T13:04:29.436Z,1520514269.436 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T13:04:29.436Z,1520514269.436 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T13:04:29.763Z,1520514269.763 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T13:04:29.763Z,1520514269.763 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 107
2018-03-08T13:04:29.763Z,1520514269.763 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T13:04:29.763Z,1520514269.763 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 107
2018-03-08T13:04:29.764Z,1520514269.764 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T13:04:29.764Z,1520514269.764 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 107
2018-03-08T13:04:30.154Z,1520514270.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T13:04:30.154Z,1520514270.154 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:04:30.155Z,1520514270.155 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:04:30.155Z,1520514270.155 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T13:04:30.155Z,1520514270.155 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:04:30.156Z,1520514270.156 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:04:30.156Z,1520514270.156 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T13:04:30.157Z,1520514270.157 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:04:30.157Z,1520514270.157 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:04:30.556Z,1520514270.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T13:04:30.558Z,1520514270.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:30.963Z,1520514270.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T13:04:30.964Z,1520514270.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:31.363Z,1520514271.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T13:04:31.364Z,1520514271.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:31.761Z,1520514271.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T13:04:31.761Z,1520514271.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:32.164Z,1520514272.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T13:04:32.169Z,1520514272.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:32.558Z,1520514272.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T13:04:32.559Z,1520514272.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:32.939Z,1520514272.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T13:04:32.939Z,1520514272.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:33.370Z,1520514273.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T13:04:33.371Z,1520514273.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:33.768Z,1520514273.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T13:04:33.769Z,1520514273.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:34.165Z,1520514274.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T13:04:34.166Z,1520514274.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:34.570Z,1520514274.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T13:04:34.571Z,1520514274.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:34.946Z,1520514274.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T13:04:34.947Z,1520514274.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:35.355Z,1520514275.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T13:04:35.355Z,1520514275.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:35.764Z,1520514275.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T13:04:35.765Z,1520514275.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:36.154Z,1520514276.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T13:04:36.155Z,1520514276.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:36.552Z,1520514276.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T13:04:36.553Z,1520514276.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:36.963Z,1520514276.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T13:04:36.964Z,1520514276.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:37.366Z,1520514277.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T13:04:37.367Z,1520514277.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:37.766Z,1520514277.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T13:04:37.767Z,1520514277.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:38.162Z,1520514278.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T13:04:38.162Z,1520514278.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:38.550Z,1520514278.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T13:04:38.551Z,1520514278.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:38.952Z,1520514278.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T13:04:38.953Z,1520514278.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:39.369Z,1520514279.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T13:04:39.370Z,1520514279.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:39.772Z,1520514279.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T13:04:39.777Z,1520514279.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:40.158Z,1520514280.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T13:04:40.159Z,1520514280.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:40.539Z,1520514280.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T13:04:40.540Z,1520514280.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:40.958Z,1520514280.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T13:04:40.959Z,1520514280.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:41.356Z,1520514281.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T13:04:41.357Z,1520514281.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:41.764Z,1520514281.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T13:04:41.769Z,1520514281.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:42.160Z,1520514282.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T13:04:42.161Z,1520514282.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:42.550Z,1520514282.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T13:04:42.551Z,1520514282.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:42.955Z,1520514282.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T13:04:42.955Z,1520514282.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:43.370Z,1520514283.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T13:04:43.371Z,1520514283.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:43.762Z,1520514283.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T13:04:43.763Z,1520514283.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:44.164Z,1520514284.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T13:04:44.169Z,1520514284.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:44.558Z,1520514284.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T13:04:44.559Z,1520514284.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:44.960Z,1520514284.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T13:04:44.961Z,1520514284.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:45.366Z,1520514285.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T13:04:45.367Z,1520514285.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:45.762Z,1520514285.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T13:04:45.763Z,1520514285.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:46.165Z,1520514286.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T13:04:46.166Z,1520514286.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:46.572Z,1520514286.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T13:04:46.578Z,1520514286.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:46.944Z,1520514286.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T13:04:46.945Z,1520514286.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:47.365Z,1520514287.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T13:04:47.366Z,1520514287.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:47.766Z,1520514287.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T13:04:47.767Z,1520514287.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:48.182Z,1520514288.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T13:04:48.183Z,1520514288.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:48.546Z,1520514288.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T13:04:48.547Z,1520514288.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:48.980Z,1520514288.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T13:04:48.981Z,1520514288.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:49.373Z,1520514289.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T13:04:49.374Z,1520514289.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:49.776Z,1520514289.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:50.154Z,1520514290.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:50.548Z,1520514290.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:50.977Z,1520514290.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:51.362Z,1520514291.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:51.768Z,1520514291.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:52.162Z,1520514292.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:52.561Z,1520514292.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:52.951Z,1520514292.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:53.356Z,1520514293.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:53.761Z,1520514293.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:54.171Z,1520514294.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:54.561Z,1520514294.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:54.953Z,1520514294.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:55.361Z,1520514295.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:55.762Z,1520514295.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:56.162Z,1520514296.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:56.554Z,1520514296.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:56.953Z,1520514296.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:57.358Z,1520514297.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:57.765Z,1520514297.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:58.168Z,1520514298.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:58.554Z,1520514298.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:58.971Z,1520514298.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:59.361Z,1520514299.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:04:59.774Z,1520514299.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:00.162Z,1520514300.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:00.552Z,1520514300.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:00.956Z,1520514300.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:01.401Z,1520514301.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:01.775Z,1520514301.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:02.157Z,1520514302.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:02.557Z,1520514302.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:02.972Z,1520514302.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:03.366Z,1520514303.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:03.761Z,1520514303.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:04.164Z,1520514304.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:04.571Z,1520514304.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:04.947Z,1520514304.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:05.355Z,1520514305.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:05.762Z,1520514305.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:06.191Z,1520514306.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:06.554Z,1520514306.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:06.950Z,1520514306.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:07.370Z,1520514307.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:07.762Z,1520514307.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:08.161Z,1520514308.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:08.549Z,1520514308.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:08.947Z,1520514308.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:09.359Z,1520514309.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:09.765Z,1520514309.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:10.200Z,1520514310.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:10.555Z,1520514310.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:10.977Z,1520514310.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:11.375Z,1520514311.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:11.762Z,1520514311.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:12.160Z,1520514312.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:12.563Z,1520514312.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:12.941Z,1520514312.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:13.365Z,1520514313.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:13.768Z,1520514313.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:14.170Z,1520514314.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:14.543Z,1520514314.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:14.946Z,1520514314.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:15.375Z,1520514315.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:15.768Z,1520514315.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:16.179Z,1520514316.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:16.547Z,1520514316.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:16.945Z,1520514316.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:17.366Z,1520514317.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:17.768Z,1520514317.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:18.173Z,1520514318.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:18.549Z,1520514318.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:18.974Z,1520514318.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:19.352Z,1520514319.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:19.777Z,1520514319.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:20.175Z,1520514320.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:20.563Z,1520514320.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:20.955Z,1520514320.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:21.366Z,1520514321.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:21.755Z,1520514321.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:22.160Z,1520514322.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:22.551Z,1520514322.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:22.963Z,1520514322.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:23.357Z,1520514323.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:23.764Z,1520514323.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:24.162Z,1520514324.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:24.551Z,1520514324.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:24.963Z,1520514324.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:25.375Z,1520514325.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:25.764Z,1520514325.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:26.161Z,1520514326.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:29.271Z,1520514329.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:29.275Z,1520514329.275 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T13:00:28.1Z
2018-03-08T13:05:29.275Z,1520514329.275 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T13:05:29.275Z,1520514329.275 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T13:05:29.390Z,1520514329.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:29.803Z,1520514329.803 [DataOverHttps](INFO): Sending 124 bytes from file Logs/20180308T074127/Courier0124.lzma
2018-03-08T13:05:29.872Z,1520514329.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:30.166Z,1520514330.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:30.499Z,1520514330.499 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0124.lzma.bak
2018-03-08T13:05:30.499Z,1520514330.499 [DataOverHttps](INFO): SBD MOMSN=7985901
2018-03-08T13:05:30.598Z,1520514330.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:31.291Z,1520514331.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:31.434Z,1520514331.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:31.799Z,1520514331.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:35.578Z,1520514335.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:35.701Z,1520514335.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:36.075Z,1520514336.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:36.473Z,1520514336.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:36.848Z,1520514336.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:37.255Z,1520514337.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:37.676Z,1520514337.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:40.782Z,1520514340.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:40.910Z,1520514340.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:41.213Z,1520514341.213 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180308T074127/Express0125.lzma
2018-03-08T13:05:41.292Z,1520514341.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:41.657Z,1520514341.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:42.011Z,1520514342.011 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0125.lzma.bak
2018-03-08T13:05:42.011Z,1520514342.011 [DataOverHttps](INFO): SBD MOMSN=7985906
2018-03-08T13:05:42.086Z,1520514342.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:42.651Z,1520514342.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:42.654Z,1520514342.654 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T13:05:42.654Z,1520514342.654 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T13:05:42.654Z,1520514342.654 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T13:05:42.870Z,1520514342.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:46.154Z,1520514346.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:46.294Z,1520514346.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:46.651Z,1520514346.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:47.045Z,1520514347.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:47.471Z,1520514347.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:47.834Z,1520514347.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:48.271Z,1520514348.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:48.639Z,1520514348.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:49.036Z,1520514349.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:49.436Z,1520514349.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:49.834Z,1520514349.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:50.231Z,1520514350.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:50.626Z,1520514350.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:51.027Z,1520514351.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:51.436Z,1520514351.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:51.836Z,1520514351.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:52.235Z,1520514352.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:52.625Z,1520514352.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:53.027Z,1520514353.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:53.435Z,1520514353.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:53.874Z,1520514353.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:54.230Z,1520514354.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:54.647Z,1520514354.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:55.047Z,1520514355.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:55.435Z,1520514355.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:55.831Z,1520514355.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:56.233Z,1520514356.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:56.634Z,1520514356.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:57.031Z,1520514357.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:57.436Z,1520514357.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:57.846Z,1520514357.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:58.248Z,1520514358.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:58.643Z,1520514358.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:59.018Z,1520514359.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:59.423Z,1520514359.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:05:59.868Z,1520514359.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:00.223Z,1520514360.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:00.666Z,1520514360.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:01.063Z,1520514361.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:01.438Z,1520514361.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:01.834Z,1520514361.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:02.229Z,1520514362.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:02.631Z,1520514362.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:03.029Z,1520514363.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:03.432Z,1520514363.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:03.831Z,1520514363.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:04.238Z,1520514364.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:04.631Z,1520514364.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:05.044Z,1520514365.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:05.426Z,1520514365.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:05.832Z,1520514365.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:06.221Z,1520514366.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:06.628Z,1520514366.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:07.032Z,1520514367.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:07.518Z,1520514367.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:07.812Z,1520514367.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:08.219Z,1520514368.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:08.622Z,1520514368.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:09.038Z,1520514369.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:09.440Z,1520514369.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:09.832Z,1520514369.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:10.315Z,1520514370.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:10.627Z,1520514370.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:11.046Z,1520514371.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:11.438Z,1520514371.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:11.834Z,1520514371.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:12.240Z,1520514372.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:12.661Z,1520514372.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:13.047Z,1520514373.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:13.442Z,1520514373.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:13.819Z,1520514373.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:14.258Z,1520514374.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:14.655Z,1520514374.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:15.024Z,1520514375.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:15.432Z,1520514375.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:15.857Z,1520514375.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:16.253Z,1520514376.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:16.625Z,1520514376.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:17.031Z,1520514377.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:17.426Z,1520514377.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:17.827Z,1520514377.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:18.239Z,1520514378.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:18.636Z,1520514378.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:19.046Z,1520514379.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:19.446Z,1520514379.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:19.838Z,1520514379.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:20.235Z,1520514380.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:20.634Z,1520514380.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:21.024Z,1520514381.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:21.446Z,1520514381.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:21.843Z,1520514381.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:22.267Z,1520514382.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:22.629Z,1520514382.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:23.066Z,1520514383.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:23.426Z,1520514383.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:23.835Z,1520514383.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:24.230Z,1520514384.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:24.643Z,1520514384.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:25.057Z,1520514385.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:25.448Z,1520514385.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:25.838Z,1520514385.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:26.219Z,1520514386.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:26.628Z,1520514386.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:27.019Z,1520514387.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:27.448Z,1520514387.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:27.879Z,1520514387.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:28.250Z,1520514388.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:28.630Z,1520514388.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:29.029Z,1520514389.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:29.435Z,1520514389.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:29.839Z,1520514389.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:30.250Z,1520514390.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:30.639Z,1520514390.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:31.046Z,1520514391.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:31.441Z,1520514391.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:31.827Z,1520514391.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:32.240Z,1520514392.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:32.648Z,1520514392.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:33.038Z,1520514393.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:33.446Z,1520514393.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:33.846Z,1520514393.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:34.247Z,1520514394.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:34.656Z,1520514394.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:35.055Z,1520514395.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:35.419Z,1520514395.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:35.826Z,1520514395.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:36.224Z,1520514396.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:36.634Z,1520514396.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:37.032Z,1520514397.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:37.438Z,1520514397.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:37.820Z,1520514397.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:38.224Z,1520514398.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:38.629Z,1520514398.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:39.021Z,1520514399.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:39.458Z,1520514399.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:39.832Z,1520514399.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:40.234Z,1520514400.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:40.652Z,1520514400.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:41.070Z,1520514401.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:41.426Z,1520514401.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:41.827Z,1520514401.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:42.230Z,1520514402.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:42.731Z,1520514402.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:43.051Z,1520514403.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:46.547Z,1520514406.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:46.686Z,1520514406.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:47.046Z,1520514407.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:47.445Z,1520514407.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:47.817Z,1520514407.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:48.249Z,1520514408.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:48.660Z,1520514408.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:49.052Z,1520514409.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:49.445Z,1520514409.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:49.816Z,1520514409.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:50.245Z,1520514410.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:50.621Z,1520514410.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:51.025Z,1520514411.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:51.427Z,1520514411.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:51.828Z,1520514411.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:52.234Z,1520514412.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:52.618Z,1520514412.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:53.022Z,1520514413.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:53.422Z,1520514413.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:53.828Z,1520514413.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:54.222Z,1520514414.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:54.628Z,1520514414.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:55.027Z,1520514415.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:55.435Z,1520514415.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:55.821Z,1520514415.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:56.221Z,1520514416.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:56.620Z,1520514416.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:57.017Z,1520514417.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:57.431Z,1520514417.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:57.831Z,1520514417.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:58.233Z,1520514418.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:58.637Z,1520514418.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:59.035Z,1520514419.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:59.478Z,1520514419.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:06:59.820Z,1520514419.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:00.231Z,1520514420.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:00.635Z,1520514420.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:01.031Z,1520514421.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:01.432Z,1520514421.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:01.825Z,1520514421.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:02.225Z,1520514422.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:02.641Z,1520514422.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:03.067Z,1520514423.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:03.430Z,1520514423.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:03.841Z,1520514423.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:04.236Z,1520514424.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:04.607Z,1520514424.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:05.034Z,1520514425.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:05.413Z,1520514425.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:05.819Z,1520514425.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:06.223Z,1520514426.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:06.647Z,1520514426.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:07.017Z,1520514427.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:07.428Z,1520514427.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:07.818Z,1520514427.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:08.218Z,1520514428.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:08.617Z,1520514428.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:09.018Z,1520514429.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:09.421Z,1520514429.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:09.831Z,1520514429.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:10.256Z,1520514430.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:10.613Z,1520514430.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:11.017Z,1520514431.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:11.417Z,1520514431.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:11.818Z,1520514431.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:12.219Z,1520514432.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:12.632Z,1520514432.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:13.066Z,1520514433.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:13.440Z,1520514433.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:13.816Z,1520514433.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:14.234Z,1520514434.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:14.637Z,1520514434.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:15.017Z,1520514435.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:15.416Z,1520514435.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:15.850Z,1520514435.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:16.245Z,1520514436.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:16.619Z,1520514436.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:17.015Z,1520514437.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:17.418Z,1520514437.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:17.825Z,1520514437.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:18.254Z,1520514438.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:18.666Z,1520514438.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:19.024Z,1520514439.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:19.425Z,1520514439.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:19.818Z,1520514439.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:20.218Z,1520514440.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:20.619Z,1520514440.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:21.049Z,1520514441.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:21.439Z,1520514441.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:21.845Z,1520514441.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:22.234Z,1520514442.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:22.626Z,1520514442.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:23.047Z,1520514443.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:23.437Z,1520514443.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:23.841Z,1520514443.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:24.245Z,1520514444.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:24.636Z,1520514444.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:25.033Z,1520514445.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:25.436Z,1520514445.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:25.814Z,1520514445.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:26.241Z,1520514446.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:26.615Z,1520514446.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:27.082Z,1520514447.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:27.421Z,1520514447.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:27.844Z,1520514447.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:28.253Z,1520514448.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:28.639Z,1520514448.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:29.228Z,1520514449.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:29.457Z,1520514449.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:29.826Z,1520514449.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:30.221Z,1520514450.221 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:30.221Z,1520514450.221 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 108
2018-03-08T13:07:30.221Z,1520514450.221 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T13:07:30.223Z,1520514450.223 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:30.223Z,1520514450.223 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 108
2018-03-08T13:07:30.223Z,1520514450.223 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T13:07:30.224Z,1520514450.224 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:30.224Z,1520514450.224 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 108
2018-03-08T13:07:30.225Z,1520514450.225 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T13:07:30.237Z,1520514450.237 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T13:07:30.237Z,1520514450.237 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T13:07:30.237Z,1520514450.237 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T13:07:30.640Z,1520514450.640 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T13:07:30.641Z,1520514450.641 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 108
2018-03-08T13:07:30.641Z,1520514450.641 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T13:07:30.641Z,1520514450.641 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 108
2018-03-08T13:07:30.642Z,1520514450.642 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T13:07:30.642Z,1520514450.642 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 108
2018-03-08T13:07:31.030Z,1520514451.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T13:07:31.030Z,1520514451.030 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:07:31.031Z,1520514451.031 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:07:31.031Z,1520514451.031 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T13:07:31.031Z,1520514451.031 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:07:31.032Z,1520514451.032 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:07:31.032Z,1520514451.032 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T13:07:31.033Z,1520514451.033 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:07:31.033Z,1520514451.033 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:07:31.427Z,1520514451.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T13:07:31.428Z,1520514451.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:31.830Z,1520514451.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T13:07:31.831Z,1520514451.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:32.223Z,1520514452.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T13:07:32.224Z,1520514452.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:32.625Z,1520514452.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T13:07:32.626Z,1520514452.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:33.024Z,1520514453.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T13:07:33.025Z,1520514453.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:33.427Z,1520514453.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T13:07:33.428Z,1520514453.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:33.835Z,1520514453.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T13:07:33.836Z,1520514453.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:34.232Z,1520514454.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T13:07:34.233Z,1520514454.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:34.625Z,1520514454.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T13:07:34.626Z,1520514454.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:35.025Z,1520514455.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T13:07:35.026Z,1520514455.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:35.423Z,1520514455.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T13:07:35.424Z,1520514455.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:35.823Z,1520514455.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T13:07:35.824Z,1520514455.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:36.271Z,1520514456.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T13:07:36.271Z,1520514456.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:36.630Z,1520514456.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T13:07:36.631Z,1520514456.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:37.035Z,1520514457.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T13:07:37.036Z,1520514457.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:37.438Z,1520514457.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T13:07:37.439Z,1520514457.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:37.835Z,1520514457.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T13:07:37.836Z,1520514457.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:38.242Z,1520514458.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T13:07:38.243Z,1520514458.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:38.615Z,1520514458.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T13:07:38.636Z,1520514458.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:39.063Z,1520514459.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T13:07:39.064Z,1520514459.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:39.438Z,1520514459.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T13:07:39.439Z,1520514459.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:39.829Z,1520514459.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T13:07:39.830Z,1520514459.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:40.227Z,1520514460.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T13:07:40.229Z,1520514460.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:40.619Z,1520514460.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T13:07:40.620Z,1520514460.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:41.014Z,1520514461.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T13:07:41.015Z,1520514461.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:41.430Z,1520514461.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T13:07:41.431Z,1520514461.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:41.822Z,1520514461.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T13:07:41.823Z,1520514461.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:42.216Z,1520514462.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T13:07:42.217Z,1520514462.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:42.630Z,1520514462.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T13:07:42.631Z,1520514462.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:43.035Z,1520514463.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T13:07:43.035Z,1520514463.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:43.481Z,1520514463.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-08T13:07:43.482Z,1520514463.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:46.823Z,1520514466.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-03-08T13:07:46.824Z,1520514466.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:46.942Z,1520514466.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2018-03-08T13:07:46.943Z,1520514466.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:47.316Z,1520514467.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2018-03-08T13:07:47.317Z,1520514467.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:47.724Z,1520514467.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2018-03-08T13:07:47.725Z,1520514467.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:48.130Z,1520514468.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2018-03-08T13:07:48.131Z,1520514468.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:48.514Z,1520514468.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-03-08T13:07:48.515Z,1520514468.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:48.912Z,1520514468.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-03-08T13:07:48.913Z,1520514468.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:49.308Z,1520514469.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-03-08T13:07:49.310Z,1520514469.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:49.759Z,1520514469.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-03-08T13:07:49.760Z,1520514469.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:50.126Z,1520514470.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-03-08T13:07:50.127Z,1520514470.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:50.528Z,1520514470.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:50.912Z,1520514470.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:51.305Z,1520514471.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:51.700Z,1520514471.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:52.098Z,1520514472.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:52.515Z,1520514472.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:52.912Z,1520514472.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:53.358Z,1520514473.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:53.699Z,1520514473.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:54.102Z,1520514474.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:54.499Z,1520514474.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:54.901Z,1520514474.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:55.306Z,1520514475.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:55.714Z,1520514475.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:56.151Z,1520514476.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:56.523Z,1520514476.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:56.961Z,1520514476.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:57.343Z,1520514477.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:57.723Z,1520514477.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:58.164Z,1520514478.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:58.527Z,1520514478.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:58.930Z,1520514478.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:59.327Z,1520514479.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:07:59.719Z,1520514479.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:00.113Z,1520514480.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:00.539Z,1520514480.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:00.919Z,1520514480.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:01.414Z,1520514481.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:01.717Z,1520514481.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:02.123Z,1520514482.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:02.520Z,1520514482.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:02.915Z,1520514482.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:03.317Z,1520514483.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:03.715Z,1520514483.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:04.125Z,1520514484.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:04.524Z,1520514484.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:04.924Z,1520514484.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:05.323Z,1520514485.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:05.730Z,1520514485.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:06.117Z,1520514486.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:06.501Z,1520514486.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:06.928Z,1520514486.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:07.334Z,1520514487.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:07.747Z,1520514487.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:08.135Z,1520514488.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:08.511Z,1520514488.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:08.912Z,1520514488.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:09.307Z,1520514489.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:09.708Z,1520514489.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:10.110Z,1520514490.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:10.513Z,1520514490.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:10.942Z,1520514490.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:11.314Z,1520514491.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:11.719Z,1520514491.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:12.112Z,1520514492.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:12.506Z,1520514492.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:12.913Z,1520514492.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:13.329Z,1520514493.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:13.720Z,1520514493.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:14.121Z,1520514494.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:14.517Z,1520514494.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:14.914Z,1520514494.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:15.314Z,1520514495.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:15.726Z,1520514495.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:16.118Z,1520514496.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:16.575Z,1520514496.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:16.921Z,1520514496.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:17.329Z,1520514497.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:17.709Z,1520514497.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:18.122Z,1520514498.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:18.527Z,1520514498.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:18.907Z,1520514498.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:19.307Z,1520514499.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:19.729Z,1520514499.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:20.127Z,1520514500.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:20.530Z,1520514500.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:20.906Z,1520514500.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:21.307Z,1520514501.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:21.730Z,1520514501.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:22.106Z,1520514502.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:22.529Z,1520514502.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:22.930Z,1520514502.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:23.329Z,1520514503.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:23.717Z,1520514503.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:24.110Z,1520514504.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:24.509Z,1520514504.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:24.918Z,1520514504.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:25.307Z,1520514505.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:25.720Z,1520514505.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:26.117Z,1520514506.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:26.517Z,1520514506.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:26.904Z,1520514506.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:27.311Z,1520514507.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:27.715Z,1520514507.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:28.110Z,1520514508.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:28.515Z,1520514508.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:28.916Z,1520514508.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:29.314Z,1520514509.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:29.717Z,1520514509.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:30.110Z,1520514510.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:30.505Z,1520514510.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:30.911Z,1520514510.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:31.316Z,1520514511.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:31.710Z,1520514511.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:32.122Z,1520514512.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:32.515Z,1520514512.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:32.907Z,1520514512.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:33.309Z,1520514513.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:33.714Z,1520514513.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:34.120Z,1520514514.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:34.519Z,1520514514.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:34.927Z,1520514514.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:35.316Z,1520514515.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:35.718Z,1520514515.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:36.116Z,1520514516.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:36.515Z,1520514516.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:36.917Z,1520514516.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:37.313Z,1520514517.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:37.725Z,1520514517.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:38.126Z,1520514518.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:38.524Z,1520514518.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:38.925Z,1520514518.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:39.323Z,1520514519.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:39.724Z,1520514519.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:40.130Z,1520514520.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:40.549Z,1520514520.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:40.935Z,1520514520.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:41.319Z,1520514521.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:41.714Z,1520514521.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:42.114Z,1520514522.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:42.506Z,1520514522.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:42.910Z,1520514522.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:43.310Z,1520514523.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:43.716Z,1520514523.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:47.065Z,1520514527.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:47.214Z,1520514527.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:47.551Z,1520514527.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:47.929Z,1520514527.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:48.330Z,1520514528.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:48.734Z,1520514528.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:49.133Z,1520514529.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:49.561Z,1520514529.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:50.011Z,1520514530.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:50.358Z,1520514530.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:50.745Z,1520514530.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:51.140Z,1520514531.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:51.537Z,1520514531.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:51.942Z,1520514531.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:52.345Z,1520514532.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:52.758Z,1520514532.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:53.151Z,1520514533.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:53.535Z,1520514533.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:53.985Z,1520514533.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:54.346Z,1520514534.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:54.755Z,1520514534.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:55.154Z,1520514535.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:55.550Z,1520514535.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:55.950Z,1520514535.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:56.357Z,1520514536.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:56.756Z,1520514536.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:57.159Z,1520514537.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:57.534Z,1520514537.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:57.927Z,1520514537.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:58.351Z,1520514538.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:58.753Z,1520514538.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:59.152Z,1520514539.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:59.575Z,1520514539.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:08:59.934Z,1520514539.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:00.363Z,1520514540.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:00.764Z,1520514540.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:01.160Z,1520514541.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:01.537Z,1520514541.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:01.959Z,1520514541.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:02.344Z,1520514542.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:02.741Z,1520514542.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:03.148Z,1520514543.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:03.538Z,1520514543.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:03.938Z,1520514543.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:04.342Z,1520514544.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:04.782Z,1520514544.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:05.147Z,1520514545.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:05.538Z,1520514545.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:05.944Z,1520514545.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:06.348Z,1520514546.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:06.752Z,1520514546.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:07.154Z,1520514547.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:07.538Z,1520514547.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:07.946Z,1520514547.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:08.348Z,1520514548.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:08.748Z,1520514548.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:09.148Z,1520514549.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:09.543Z,1520514549.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:09.946Z,1520514549.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:10.354Z,1520514550.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:10.753Z,1520514550.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:11.154Z,1520514551.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:11.542Z,1520514551.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:11.943Z,1520514551.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:12.349Z,1520514552.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:12.749Z,1520514552.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:13.151Z,1520514553.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:13.539Z,1520514553.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:13.943Z,1520514553.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:14.354Z,1520514554.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:14.743Z,1520514554.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:15.148Z,1520514555.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:15.547Z,1520514555.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:15.955Z,1520514555.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:16.347Z,1520514556.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:16.758Z,1520514556.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:17.147Z,1520514557.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:17.555Z,1520514557.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:17.966Z,1520514557.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:18.352Z,1520514558.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:18.752Z,1520514558.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:19.161Z,1520514559.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:19.531Z,1520514559.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:19.939Z,1520514559.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:20.378Z,1520514560.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:20.732Z,1520514560.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:21.171Z,1520514561.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:21.531Z,1520514561.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:21.934Z,1520514561.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:22.362Z,1520514562.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:22.760Z,1520514562.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:23.168Z,1520514563.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:23.540Z,1520514563.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:23.942Z,1520514563.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:24.339Z,1520514564.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:24.744Z,1520514564.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:25.146Z,1520514565.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:25.564Z,1520514565.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:25.934Z,1520514565.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:26.390Z,1520514566.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:26.740Z,1520514566.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:27.173Z,1520514567.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:27.538Z,1520514567.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:27.969Z,1520514567.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:28.370Z,1520514568.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:28.744Z,1520514568.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:29.147Z,1520514569.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:29.540Z,1520514569.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:29.937Z,1520514569.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:30.342Z,1520514570.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:30.745Z,1520514570.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:31.146Z,1520514571.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:31.532Z,1520514571.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:31.980Z,1520514571.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:32.343Z,1520514572.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:32.771Z,1520514572.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:33.163Z,1520514573.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:33.539Z,1520514573.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:33.939Z,1520514573.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:34.356Z,1520514574.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:34.751Z,1520514574.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:35.144Z,1520514575.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:35.537Z,1520514575.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:35.959Z,1520514575.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:36.344Z,1520514576.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:36.754Z,1520514576.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:37.158Z,1520514577.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:37.543Z,1520514577.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:37.949Z,1520514577.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:38.406Z,1520514578.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:38.742Z,1520514578.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:39.153Z,1520514579.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:39.546Z,1520514579.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:39.923Z,1520514579.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:40.358Z,1520514580.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:40.753Z,1520514580.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:41.157Z,1520514581.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:41.534Z,1520514581.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:41.929Z,1520514581.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:42.357Z,1520514582.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:42.807Z,1520514582.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:43.166Z,1520514583.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:43.535Z,1520514583.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:43.959Z,1520514583.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:47.466Z,1520514587.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:47.622Z,1520514587.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:47.960Z,1520514587.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:48.336Z,1520514588.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:48.770Z,1520514588.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:49.177Z,1520514589.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:49.550Z,1520514589.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:49.958Z,1520514589.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:50.443Z,1520514590.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:50.836Z,1520514590.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:51.149Z,1520514591.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:51.561Z,1520514591.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:51.961Z,1520514591.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:52.350Z,1520514592.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:52.757Z,1520514592.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:53.187Z,1520514593.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:53.536Z,1520514593.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:53.935Z,1520514593.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:54.367Z,1520514594.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:54.763Z,1520514594.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:55.165Z,1520514595.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:55.586Z,1520514595.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:55.954Z,1520514595.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:56.355Z,1520514596.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:56.752Z,1520514596.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:57.148Z,1520514597.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:57.541Z,1520514597.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:57.937Z,1520514597.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:58.359Z,1520514598.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:58.759Z,1520514598.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:59.156Z,1520514599.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:59.545Z,1520514599.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:09:59.961Z,1520514599.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:00.366Z,1520514600.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:00.751Z,1520514600.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:01.159Z,1520514601.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:01.584Z,1520514601.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:01.952Z,1520514601.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:02.359Z,1520514602.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:02.758Z,1520514602.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:03.159Z,1520514603.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:03.550Z,1520514603.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:03.959Z,1520514603.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:04.353Z,1520514604.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:04.798Z,1520514604.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:05.158Z,1520514605.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:05.549Z,1520514605.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:05.949Z,1520514605.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:06.366Z,1520514606.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:06.747Z,1520514606.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:07.157Z,1520514607.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:07.553Z,1520514607.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:07.923Z,1520514607.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:08.358Z,1520514608.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:08.753Z,1520514608.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:09.158Z,1520514609.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:09.546Z,1520514609.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:09.957Z,1520514609.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:10.350Z,1520514610.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:10.759Z,1520514610.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:11.153Z,1520514611.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:11.550Z,1520514611.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:11.932Z,1520514611.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:12.394Z,1520514612.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:12.748Z,1520514612.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:13.165Z,1520514613.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:13.539Z,1520514613.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:13.933Z,1520514613.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:14.340Z,1520514614.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:14.752Z,1520514614.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:15.140Z,1520514615.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:15.539Z,1520514615.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:15.946Z,1520514615.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:16.349Z,1520514616.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:16.795Z,1520514616.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:17.158Z,1520514617.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:17.555Z,1520514617.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:17.949Z,1520514617.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:18.351Z,1520514618.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:18.754Z,1520514618.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:19.151Z,1520514619.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:19.550Z,1520514619.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:19.923Z,1520514619.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:20.351Z,1520514620.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:20.757Z,1520514620.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:21.167Z,1520514621.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:21.555Z,1520514621.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:21.933Z,1520514621.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:22.355Z,1520514622.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:22.763Z,1520514622.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:23.214Z,1520514623.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:23.541Z,1520514623.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:23.936Z,1520514623.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:24.354Z,1520514624.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:24.751Z,1520514624.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:25.150Z,1520514625.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:25.543Z,1520514625.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:25.935Z,1520514625.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:26.347Z,1520514626.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:26.760Z,1520514626.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:27.162Z,1520514627.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:27.534Z,1520514627.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:27.929Z,1520514627.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:28.342Z,1520514628.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:28.785Z,1520514628.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:29.166Z,1520514629.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:29.530Z,1520514629.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:29.943Z,1520514629.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:30.345Z,1520514630.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:30.753Z,1520514630.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:31.147Z,1520514631.147 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:31.147Z,1520514631.147 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 109
2018-03-08T13:10:31.147Z,1520514631.147 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T13:10:31.153Z,1520514631.153 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:31.153Z,1520514631.153 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 109
2018-03-08T13:10:31.153Z,1520514631.153 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T13:10:31.155Z,1520514631.155 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:31.155Z,1520514631.155 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 109
2018-03-08T13:10:31.155Z,1520514631.155 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T13:10:31.175Z,1520514631.175 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T13:10:31.175Z,1520514631.175 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T13:10:31.175Z,1520514631.175 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T13:10:31.577Z,1520514631.577 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T13:10:31.577Z,1520514631.577 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 109
2018-03-08T13:10:31.577Z,1520514631.577 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T13:10:31.577Z,1520514631.577 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 109
2018-03-08T13:10:31.578Z,1520514631.578 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T13:10:31.578Z,1520514631.578 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 109
2018-03-08T13:10:31.937Z,1520514631.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T13:10:31.937Z,1520514631.937 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:10:31.938Z,1520514631.938 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:10:31.938Z,1520514631.938 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T13:10:31.939Z,1520514631.939 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:10:31.939Z,1520514631.939 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:10:31.939Z,1520514631.939 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T13:10:31.940Z,1520514631.940 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:10:31.940Z,1520514631.940 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:10:32.349Z,1520514632.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T13:10:32.350Z,1520514632.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:32.775Z,1520514632.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T13:10:32.776Z,1520514632.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:33.153Z,1520514633.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T13:10:33.154Z,1520514633.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:33.551Z,1520514633.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T13:10:33.552Z,1520514633.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:33.950Z,1520514633.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T13:10:33.951Z,1520514633.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:34.353Z,1520514634.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T13:10:34.354Z,1520514634.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:34.762Z,1520514634.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T13:10:34.763Z,1520514634.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:35.190Z,1520514635.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T13:10:35.191Z,1520514635.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:35.551Z,1520514635.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T13:10:35.552Z,1520514635.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:35.944Z,1520514635.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T13:10:35.945Z,1520514635.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:36.349Z,1520514636.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T13:10:36.350Z,1520514636.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:36.750Z,1520514636.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T13:10:36.751Z,1520514636.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:37.151Z,1520514637.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T13:10:37.152Z,1520514637.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:37.550Z,1520514637.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T13:10:37.551Z,1520514637.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:37.922Z,1520514637.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T13:10:37.923Z,1520514637.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:38.350Z,1520514638.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T13:10:38.351Z,1520514638.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:38.762Z,1520514638.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T13:10:38.763Z,1520514638.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:39.158Z,1520514639.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T13:10:39.159Z,1520514639.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:39.552Z,1520514639.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T13:10:39.553Z,1520514639.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:39.957Z,1520514639.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T13:10:39.958Z,1520514639.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:40.358Z,1520514640.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T13:10:40.359Z,1520514640.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:40.758Z,1520514640.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T13:10:40.759Z,1520514640.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:41.155Z,1520514641.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T13:10:41.156Z,1520514641.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:41.550Z,1520514641.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T13:10:41.551Z,1520514641.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:41.934Z,1520514641.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T13:10:41.935Z,1520514641.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:42.361Z,1520514642.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T13:10:42.362Z,1520514642.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:42.767Z,1520514642.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T13:10:42.768Z,1520514642.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:43.154Z,1520514643.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T13:10:43.155Z,1520514643.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:43.158Z,1520514643.158 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T13:10:43.158Z,1520514643.158 [Default:CheckIn:C.Wait] Stopped
2018-03-08T13:10:43.158Z,1520514643.158 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T13:10:43.158Z,1520514643.158 [Default:CheckIn:D] Running Loop=1
2018-03-08T13:10:43.534Z,1520514643.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T13:10:43.535Z,1520514643.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:43.538Z,1520514643.538 [Default:CheckIn:D] Stopped
2018-03-08T13:10:43.538Z,1520514643.538 [Default:CheckIn:E] Running Loop=1
2018-03-08T13:10:43.949Z,1520514643.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T13:10:43.950Z,1520514643.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:43.953Z,1520514643.953 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 324.978874 min 
2018-03-08T13:10:43.954Z,1520514643.954 [Default:CheckIn:E] Stopped
2018-03-08T13:10:43.954Z,1520514643.954 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T13:10:43.954Z,1520514643.954 [Default:CheckIn] Stopped
2018-03-08T13:10:43.954Z,1520514643.954 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T13:10:43.954Z,1520514643.954 [Default:CheckIn](INFO): Running loop #32
2018-03-08T13:10:43.954Z,1520514643.954 [Default:CheckIn] Running Loop=32
2018-03-08T13:10:43.954Z,1520514643.954 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T13:10:43.954Z,1520514643.954 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T13:10:47.603Z,1520514647.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T13:10:47.604Z,1520514647.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:47.726Z,1520514647.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-03-08T13:10:47.727Z,1520514647.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:48.103Z,1520514648.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-03-08T13:10:48.104Z,1520514648.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:48.513Z,1520514648.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-03-08T13:10:48.514Z,1520514648.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:48.879Z,1520514648.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T13:10:48.880Z,1520514648.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:49.284Z,1520514649.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-08T13:10:49.285Z,1520514649.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:49.731Z,1520514649.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-03-08T13:10:49.731Z,1520514649.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:50.114Z,1520514650.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-03-08T13:10:50.115Z,1520514650.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:50.515Z,1520514650.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-03-08T13:10:50.516Z,1520514650.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:50.886Z,1520514650.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T13:10:50.887Z,1520514650.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:51.282Z,1520514651.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:51.702Z,1520514651.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:52.105Z,1520514652.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:52.489Z,1520514652.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:52.907Z,1520514652.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:53.306Z,1520514653.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:53.694Z,1520514653.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:54.087Z,1520514654.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:54.490Z,1520514654.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:54.892Z,1520514654.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:55.290Z,1520514655.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:55.701Z,1520514655.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:56.127Z,1520514656.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:56.519Z,1520514656.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:56.889Z,1520514656.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:57.280Z,1520514657.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:57.679Z,1520514657.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:58.088Z,1520514658.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:58.491Z,1520514658.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:58.894Z,1520514658.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:59.292Z,1520514659.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:10:59.693Z,1520514659.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:00.084Z,1520514660.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:00.479Z,1520514660.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:00.883Z,1520514660.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:01.295Z,1520514661.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:01.694Z,1520514661.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:02.090Z,1520514662.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:02.494Z,1520514662.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:02.889Z,1520514662.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:03.283Z,1520514663.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:03.687Z,1520514663.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:04.086Z,1520514664.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:04.502Z,1520514664.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:04.897Z,1520514664.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:05.298Z,1520514665.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:05.676Z,1520514665.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:06.093Z,1520514666.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:06.465Z,1520514666.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:06.869Z,1520514666.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:07.276Z,1520514667.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:07.706Z,1520514667.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:08.075Z,1520514668.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:08.499Z,1520514668.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:08.880Z,1520514668.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:09.299Z,1520514669.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:09.681Z,1520514669.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:10.080Z,1520514670.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:10.505Z,1520514670.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:10.906Z,1520514670.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:11.301Z,1520514671.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:11.682Z,1520514671.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:12.082Z,1520514672.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:12.497Z,1520514672.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:12.882Z,1520514672.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:13.288Z,1520514673.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:13.734Z,1520514673.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:14.126Z,1520514674.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:14.518Z,1520514674.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:14.882Z,1520514674.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:15.283Z,1520514675.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:15.695Z,1520514675.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:16.084Z,1520514676.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:16.488Z,1520514676.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:16.894Z,1520514676.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:17.302Z,1520514677.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:17.683Z,1520514677.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:18.088Z,1520514678.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:18.526Z,1520514678.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:18.897Z,1520514678.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:19.292Z,1520514679.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:19.699Z,1520514679.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:20.097Z,1520514680.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:20.495Z,1520514680.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:20.886Z,1520514680.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:21.294Z,1520514681.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:21.706Z,1520514681.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:22.102Z,1520514682.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:22.502Z,1520514682.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:22.892Z,1520514682.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:23.296Z,1520514683.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:23.703Z,1520514683.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:24.067Z,1520514684.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:24.506Z,1520514684.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:24.877Z,1520514684.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:25.298Z,1520514685.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:25.708Z,1520514685.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:26.082Z,1520514686.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:26.479Z,1520514686.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:26.907Z,1520514686.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:27.282Z,1520514687.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:27.680Z,1520514687.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:28.077Z,1520514688.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:28.506Z,1520514688.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:28.906Z,1520514688.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:29.302Z,1520514689.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:29.711Z,1520514689.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:30.105Z,1520514690.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:30.479Z,1520514690.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:30.882Z,1520514690.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:31.280Z,1520514691.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:31.706Z,1520514691.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:32.105Z,1520514692.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:32.484Z,1520514692.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:32.881Z,1520514692.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:33.304Z,1520514693.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:33.683Z,1520514693.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:34.082Z,1520514694.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:34.483Z,1520514694.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:34.907Z,1520514694.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:35.284Z,1520514695.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:35.682Z,1520514695.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:36.080Z,1520514696.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:36.506Z,1520514696.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:36.874Z,1520514696.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:37.281Z,1520514697.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:37.687Z,1520514697.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:38.102Z,1520514698.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:38.488Z,1520514698.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:38.882Z,1520514698.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:39.286Z,1520514699.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:39.704Z,1520514699.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:40.078Z,1520514700.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:40.490Z,1520514700.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:40.887Z,1520514700.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:41.306Z,1520514701.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:41.680Z,1520514701.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:42.092Z,1520514702.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:42.479Z,1520514702.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:42.906Z,1520514702.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:43.286Z,1520514703.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.380397 seconds old.
2018-03-08T13:11:43.287Z,1520514703.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:43.288Z,1520514703.288 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.380739 seconds old.
2018-03-08T13:11:43.305Z,1520514703.305 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.397333 seconds old.
2018-03-08T13:11:43.723Z,1520514703.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.817059 seconds old.
2018-03-08T13:11:43.724Z,1520514703.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:43.725Z,1520514703.725 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.817511 seconds old.
2018-03-08T13:11:43.726Z,1520514703.726 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.817885 seconds old.
2018-03-08T13:11:44.091Z,1520514704.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.185062 seconds old.
2018-03-08T13:11:44.092Z,1520514704.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:44.093Z,1520514704.093 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.185595 seconds old.
2018-03-08T13:11:44.094Z,1520514704.094 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.185988 seconds old.
2018-03-08T13:11:47.784Z,1520514707.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.878320 seconds old.
2018-03-08T13:11:47.785Z,1520514707.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:47.786Z,1520514707.786 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.878741 seconds old.
2018-03-08T13:11:47.787Z,1520514707.787 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.879100 seconds old.
2018-03-08T13:11:47.799Z,1520514707.799 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T13:11:47.924Z,1520514707.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.017968 seconds old.
2018-03-08T13:11:47.925Z,1520514707.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:47.926Z,1520514707.926 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.018538 seconds old.
2018-03-08T13:11:47.927Z,1520514707.927 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.018896 seconds old.
2018-03-08T13:11:48.270Z,1520514708.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:48.658Z,1520514708.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:49.053Z,1520514709.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:49.102Z,1520514709.102 [CBIT](INFO): Clearing failed state for component DropWeight
2018-03-08T13:11:49.102Z,1520514709.102 [DropWeight] No Fault, FailCount= 1
2018-03-08T13:11:49.482Z,1520514709.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:49.886Z,1520514709.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:50.282Z,1520514710.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:50.655Z,1520514710.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:51.057Z,1520514711.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:51.463Z,1520514711.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:51.860Z,1520514711.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:52.262Z,1520514712.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:52.690Z,1520514712.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:53.090Z,1520514713.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:53.489Z,1520514713.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:53.855Z,1520514713.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:54.283Z,1520514714.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:54.661Z,1520514714.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:55.057Z,1520514715.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:55.486Z,1520514715.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:55.864Z,1520514715.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:56.287Z,1520514716.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:56.663Z,1520514716.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:57.058Z,1520514717.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:57.459Z,1520514717.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:57.873Z,1520514717.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:58.292Z,1520514718.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:58.690Z,1520514718.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:59.064Z,1520514719.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:59.488Z,1520514719.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:11:59.858Z,1520514719.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:00.256Z,1520514720.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:00.659Z,1520514720.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:01.059Z,1520514721.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:01.461Z,1520514721.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:01.888Z,1520514721.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:02.264Z,1520514722.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:02.659Z,1520514722.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:03.058Z,1520514723.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:03.460Z,1520514723.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:03.860Z,1520514723.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:04.262Z,1520514724.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:04.688Z,1520514724.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:05.096Z,1520514725.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:05.465Z,1520514725.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:05.863Z,1520514725.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:06.271Z,1520514726.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:06.703Z,1520514726.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:07.063Z,1520514727.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:07.468Z,1520514727.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:07.872Z,1520514727.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:08.272Z,1520514728.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:08.667Z,1520514728.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:09.066Z,1520514729.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:09.481Z,1520514729.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:09.877Z,1520514729.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:10.266Z,1520514730.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:10.676Z,1520514730.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:11.082Z,1520514731.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:11.516Z,1520514731.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:11.863Z,1520514731.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:12.259Z,1520514732.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:12.663Z,1520514732.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:13.064Z,1520514733.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:13.479Z,1520514733.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:13.872Z,1520514733.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:14.272Z,1520514734.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:14.669Z,1520514734.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:15.071Z,1520514735.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:15.469Z,1520514735.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:15.867Z,1520514735.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:16.277Z,1520514736.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:16.685Z,1520514736.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:17.078Z,1520514737.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:17.474Z,1520514737.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:17.866Z,1520514737.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:18.270Z,1520514738.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:18.670Z,1520514738.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:19.059Z,1520514739.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:19.473Z,1520514739.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:19.879Z,1520514739.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:20.274Z,1520514740.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:20.665Z,1520514740.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:21.068Z,1520514741.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:21.464Z,1520514741.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:21.861Z,1520514741.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:22.266Z,1520514742.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:22.674Z,1520514742.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:23.082Z,1520514743.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:23.473Z,1520514743.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:23.866Z,1520514743.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:24.267Z,1520514744.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:24.663Z,1520514744.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:25.065Z,1520514745.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:25.483Z,1520514745.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:25.876Z,1520514745.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:26.272Z,1520514746.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:26.659Z,1520514746.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:27.071Z,1520514747.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:27.469Z,1520514747.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:27.869Z,1520514747.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:28.271Z,1520514748.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:28.712Z,1520514748.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:29.090Z,1520514749.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:29.484Z,1520514749.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:29.902Z,1520514749.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:30.282Z,1520514750.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:30.659Z,1520514750.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:31.050Z,1520514751.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:31.485Z,1520514751.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:31.883Z,1520514751.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:32.354Z,1520514752.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:32.697Z,1520514752.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:33.055Z,1520514753.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:33.450Z,1520514753.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:33.862Z,1520514753.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:34.254Z,1520514754.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:34.660Z,1520514754.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:35.068Z,1520514755.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:35.472Z,1520514755.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:35.851Z,1520514755.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:36.257Z,1520514756.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:36.659Z,1520514756.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:37.057Z,1520514757.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:37.495Z,1520514757.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:37.891Z,1520514757.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:38.290Z,1520514758.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:38.671Z,1520514758.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:39.066Z,1520514759.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:39.466Z,1520514759.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:39.895Z,1520514759.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:40.267Z,1520514760.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:40.668Z,1520514760.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:41.072Z,1520514761.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:41.480Z,1520514761.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:41.859Z,1520514761.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:42.315Z,1520514762.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:42.674Z,1520514762.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:43.066Z,1520514763.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:43.418Z,1520514763.418 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T13:12:43.418Z,1520514763.418 [NAL9602] Data Fault, FailCount= 1
2018-03-08T13:12:43.418Z,1520514763.418 [NAL9602](ERROR): Data Fault
2018-03-08T13:12:43.471Z,1520514763.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:43.497Z,1520514763.497 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T13:12:43.819Z,1520514763.819 [NAL9602](INFO): Powering down
2018-03-08T13:12:43.876Z,1520514763.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:44.263Z,1520514764.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:47.469Z,1520514767.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:47.490Z,1520514767.490 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T13:12:47.490Z,1520514767.490 [NAL9602] No Fault, FailCount= 1
2018-03-08T13:12:47.635Z,1520514767.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:47.984Z,1520514767.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:48.346Z,1520514768.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:48.743Z,1520514768.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:49.147Z,1520514769.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:49.547Z,1520514769.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:49.944Z,1520514769.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:50.354Z,1520514770.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:50.744Z,1520514770.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:51.151Z,1520514771.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:51.554Z,1520514771.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:51.963Z,1520514771.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:52.346Z,1520514772.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:52.770Z,1520514772.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:53.166Z,1520514773.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:53.555Z,1520514773.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:53.953Z,1520514773.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:54.440Z,1520514774.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:54.732Z,1520514774.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:55.160Z,1520514775.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:55.558Z,1520514775.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:55.935Z,1520514775.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:56.375Z,1520514776.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:56.748Z,1520514776.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:57.149Z,1520514777.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:57.590Z,1520514777.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:57.958Z,1520514777.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:58.359Z,1520514778.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:58.760Z,1520514778.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:59.155Z,1520514779.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:59.548Z,1520514779.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:12:59.954Z,1520514779.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:00.348Z,1520514780.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:00.745Z,1520514780.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:01.150Z,1520514781.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:01.561Z,1520514781.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:01.945Z,1520514781.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:02.448Z,1520514782.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:02.754Z,1520514782.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:03.160Z,1520514783.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:03.574Z,1520514783.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:03.962Z,1520514783.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:04.349Z,1520514784.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:04.754Z,1520514784.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:05.154Z,1520514785.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:05.554Z,1520514785.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:05.954Z,1520514785.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:06.355Z,1520514786.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:06.750Z,1520514786.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:07.152Z,1520514787.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:07.532Z,1520514787.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:07.953Z,1520514787.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:08.362Z,1520514788.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:08.758Z,1520514788.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:09.162Z,1520514789.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:09.570Z,1520514789.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:09.934Z,1520514789.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:10.346Z,1520514790.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:10.741Z,1520514790.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:11.147Z,1520514791.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:11.545Z,1520514791.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:11.950Z,1520514791.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:12.337Z,1520514792.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:12.745Z,1520514792.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:13.150Z,1520514793.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:13.537Z,1520514793.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:13.914Z,1520514793.914 [NAL9602](INFO): Powering up NAL9602
2018-03-08T13:13:13.946Z,1520514793.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:14.343Z,1520514794.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:14.741Z,1520514794.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:15.147Z,1520514795.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:15.545Z,1520514795.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:15.943Z,1520514795.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:16.346Z,1520514796.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:16.746Z,1520514796.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:17.138Z,1520514797.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:17.546Z,1520514797.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:17.946Z,1520514797.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:18.346Z,1520514798.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:18.742Z,1520514798.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:19.141Z,1520514799.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:19.541Z,1520514799.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:19.947Z,1520514799.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:20.345Z,1520514800.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:20.739Z,1520514800.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:21.146Z,1520514801.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:21.544Z,1520514801.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:21.942Z,1520514801.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:22.346Z,1520514802.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:22.744Z,1520514802.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:23.142Z,1520514803.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:23.547Z,1520514803.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:23.946Z,1520514803.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:24.375Z,1520514804.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:24.704Z,1520514804.704 [NAL9602](INFO): NAL9602 initialized
2018-03-08T13:13:24.750Z,1520514804.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:25.146Z,1520514805.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:25.577Z,1520514805.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:25.975Z,1520514805.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:26.348Z,1520514806.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:26.834Z,1520514806.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:27.147Z,1520514807.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:27.548Z,1520514807.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:28.007Z,1520514808.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:28.352Z,1520514808.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:28.791Z,1520514808.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:29.176Z,1520514809.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:29.547Z,1520514809.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:29.949Z,1520514809.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:30.347Z,1520514810.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:30.753Z,1520514810.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:31.178Z,1520514811.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:31.555Z,1520514811.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:31.955Z,1520514811.955 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:31.955Z,1520514811.955 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 110
2018-03-08T13:13:31.955Z,1520514811.955 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T13:13:31.957Z,1520514811.957 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:31.957Z,1520514811.957 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 110
2018-03-08T13:13:31.957Z,1520514811.957 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T13:13:31.959Z,1520514811.959 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:31.959Z,1520514811.959 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 110
2018-03-08T13:13:31.959Z,1520514811.959 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T13:13:32.027Z,1520514812.027 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T13:13:32.028Z,1520514812.028 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T13:13:32.028Z,1520514812.028 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T13:13:32.405Z,1520514812.405 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T13:13:32.405Z,1520514812.405 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 110
2018-03-08T13:13:32.405Z,1520514812.405 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T13:13:32.405Z,1520514812.405 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 110
2018-03-08T13:13:32.406Z,1520514812.406 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T13:13:32.406Z,1520514812.406 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 110
2018-03-08T13:13:32.766Z,1520514812.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T13:13:32.766Z,1520514812.766 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:13:32.766Z,1520514812.766 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:13:32.767Z,1520514812.767 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T13:13:32.767Z,1520514812.767 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:13:32.767Z,1520514812.767 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:13:32.768Z,1520514812.768 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T13:13:32.768Z,1520514812.768 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:13:32.769Z,1520514812.769 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:13:33.161Z,1520514813.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T13:13:33.162Z,1520514813.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:33.571Z,1520514813.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T13:13:33.572Z,1520514813.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:33.986Z,1520514813.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T13:13:33.987Z,1520514813.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:34.370Z,1520514814.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T13:13:34.371Z,1520514814.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:34.762Z,1520514814.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T13:13:34.763Z,1520514814.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:35.161Z,1520514815.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T13:13:35.162Z,1520514815.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:35.560Z,1520514815.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T13:13:35.561Z,1520514815.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:35.957Z,1520514815.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T13:13:35.958Z,1520514815.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:36.358Z,1520514816.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T13:13:36.359Z,1520514816.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:36.760Z,1520514816.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T13:13:36.761Z,1520514816.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:37.163Z,1520514817.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T13:13:37.164Z,1520514817.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:37.561Z,1520514817.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T13:13:37.562Z,1520514817.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:37.956Z,1520514817.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T13:13:37.957Z,1520514817.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:38.356Z,1520514818.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T13:13:38.357Z,1520514818.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:38.761Z,1520514818.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T13:13:38.762Z,1520514818.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:39.166Z,1520514819.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T13:13:39.167Z,1520514819.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:39.559Z,1520514819.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T13:13:39.560Z,1520514819.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:39.951Z,1520514819.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T13:13:39.951Z,1520514819.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:40.360Z,1520514820.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T13:13:40.361Z,1520514820.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:40.759Z,1520514820.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T13:13:40.760Z,1520514820.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:41.163Z,1520514821.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T13:13:41.164Z,1520514821.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:41.566Z,1520514821.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T13:13:41.567Z,1520514821.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:41.970Z,1520514821.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T13:13:41.971Z,1520514821.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:42.362Z,1520514822.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T13:13:42.363Z,1520514822.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:42.802Z,1520514822.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T13:13:42.803Z,1520514822.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:43.171Z,1520514823.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T13:13:43.172Z,1520514823.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:43.589Z,1520514823.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T13:13:43.590Z,1520514823.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:43.982Z,1520514823.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T13:13:43.983Z,1520514823.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:44.352Z,1520514824.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T13:13:44.353Z,1520514824.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:48.036Z,1520514828.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T13:13:48.037Z,1520514828.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:48.184Z,1520514828.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-03-08T13:13:48.185Z,1520514828.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:48.531Z,1520514828.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-03-08T13:13:48.532Z,1520514828.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:48.912Z,1520514828.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-03-08T13:13:48.934Z,1520514828.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:49.313Z,1520514829.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-03-08T13:13:49.314Z,1520514829.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:49.716Z,1520514829.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-03-08T13:13:49.717Z,1520514829.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:50.153Z,1520514830.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-03-08T13:13:50.154Z,1520514830.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:50.511Z,1520514830.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-03-08T13:13:50.512Z,1520514830.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:50.915Z,1520514830.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-03-08T13:13:50.916Z,1520514830.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:51.321Z,1520514831.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-03-08T13:13:51.322Z,1520514831.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:51.707Z,1520514831.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-03-08T13:13:51.708Z,1520514831.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:52.134Z,1520514832.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:52.535Z,1520514832.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:52.916Z,1520514832.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:53.308Z,1520514833.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:53.717Z,1520514833.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:54.120Z,1520514834.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:54.520Z,1520514834.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:54.921Z,1520514834.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:55.323Z,1520514835.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:55.719Z,1520514835.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:56.114Z,1520514836.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:56.510Z,1520514836.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:56.914Z,1520514836.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:57.321Z,1520514837.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:57.724Z,1520514837.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:58.131Z,1520514838.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:58.525Z,1520514838.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:58.914Z,1520514838.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:59.315Z,1520514839.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:13:59.713Z,1520514839.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:00.122Z,1520514840.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:00.551Z,1520514840.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:00.922Z,1520514840.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:01.313Z,1520514841.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:01.722Z,1520514841.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:02.129Z,1520514842.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:02.524Z,1520514842.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:02.932Z,1520514842.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:03.327Z,1520514843.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:03.724Z,1520514843.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:04.111Z,1520514844.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:04.595Z,1520514844.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:04.931Z,1520514844.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:05.316Z,1520514845.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:05.746Z,1520514845.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:06.119Z,1520514846.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:06.518Z,1520514846.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:06.925Z,1520514846.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:07.307Z,1520514847.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:07.712Z,1520514847.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:08.107Z,1520514848.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:08.514Z,1520514848.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:08.922Z,1520514848.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:09.319Z,1520514849.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:09.720Z,1520514849.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:10.112Z,1520514850.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:10.515Z,1520514850.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:10.911Z,1520514850.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:11.314Z,1520514851.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:11.716Z,1520514851.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:12.119Z,1520514852.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:12.526Z,1520514852.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:12.920Z,1520514852.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:13.315Z,1520514853.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:13.713Z,1520514853.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:14.107Z,1520514854.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:14.510Z,1520514854.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:14.930Z,1520514854.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:15.319Z,1520514855.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:15.719Z,1520514855.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:16.110Z,1520514856.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:16.552Z,1520514856.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:16.922Z,1520514856.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:17.311Z,1520514857.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:17.709Z,1520514857.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:18.123Z,1520514858.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:18.530Z,1520514858.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:18.935Z,1520514858.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:19.311Z,1520514859.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:19.726Z,1520514859.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:20.120Z,1520514860.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:20.513Z,1520514860.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:20.926Z,1520514860.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:21.324Z,1520514861.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:21.725Z,1520514861.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:22.117Z,1520514862.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:22.522Z,1520514862.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:22.922Z,1520514862.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:23.311Z,1520514863.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:23.715Z,1520514863.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:24.130Z,1520514864.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:24.524Z,1520514864.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:24.926Z,1520514864.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:25.313Z,1520514865.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:25.719Z,1520514865.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:26.115Z,1520514866.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:26.515Z,1520514866.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:26.931Z,1520514866.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:27.324Z,1520514867.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:27.730Z,1520514867.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:28.111Z,1520514868.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:28.512Z,1520514868.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:28.912Z,1520514868.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:29.312Z,1520514869.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:29.713Z,1520514869.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:30.130Z,1520514870.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:30.530Z,1520514870.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:30.924Z,1520514870.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:31.314Z,1520514871.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:31.713Z,1520514871.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:32.120Z,1520514872.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:32.519Z,1520514872.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:32.935Z,1520514872.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:33.326Z,1520514873.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:33.721Z,1520514873.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:34.110Z,1520514874.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:34.518Z,1520514874.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:34.913Z,1520514874.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:35.313Z,1520514875.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:35.715Z,1520514875.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:36.131Z,1520514876.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:36.530Z,1520514876.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:36.927Z,1520514876.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:37.326Z,1520514877.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:37.726Z,1520514877.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:38.125Z,1520514878.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:38.499Z,1520514878.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:38.921Z,1520514878.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:39.325Z,1520514879.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:39.743Z,1520514879.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:40.103Z,1520514880.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:40.550Z,1520514880.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:40.911Z,1520514880.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:41.311Z,1520514881.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:41.712Z,1520514881.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:42.140Z,1520514882.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:42.531Z,1520514882.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:42.918Z,1520514882.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:43.310Z,1520514883.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:43.719Z,1520514883.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:44.115Z,1520514884.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:44.506Z,1520514884.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:49.696Z,1520514889.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:49.842Z,1520514889.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:50.192Z,1520514890.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:50.563Z,1520514890.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:50.999Z,1520514890.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:51.371Z,1520514891.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:51.780Z,1520514891.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:52.172Z,1520514892.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:52.608Z,1520514892.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:52.973Z,1520514892.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:53.386Z,1520514893.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:53.775Z,1520514893.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:54.177Z,1520514894.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:54.568Z,1520514894.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:54.980Z,1520514894.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:55.382Z,1520514895.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:55.786Z,1520514895.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:56.170Z,1520514896.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:56.570Z,1520514896.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:56.978Z,1520514896.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:57.368Z,1520514897.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:57.777Z,1520514897.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:58.181Z,1520514898.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:58.583Z,1520514898.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:58.971Z,1520514898.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:59.368Z,1520514899.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:14:59.830Z,1520514899.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:00.179Z,1520514900.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:00.578Z,1520514900.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:00.981Z,1520514900.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:01.382Z,1520514901.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:01.786Z,1520514901.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:02.175Z,1520514902.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:02.586Z,1520514902.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:02.985Z,1520514902.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:03.382Z,1520514903.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:03.792Z,1520514903.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:04.188Z,1520514904.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:04.594Z,1520514904.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:04.966Z,1520514904.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:05.360Z,1520514905.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:05.783Z,1520514905.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:06.167Z,1520514906.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:06.567Z,1520514906.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:06.987Z,1520514906.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:07.388Z,1520514907.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:07.776Z,1520514907.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:08.166Z,1520514908.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:08.568Z,1520514908.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:08.969Z,1520514908.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:09.366Z,1520514909.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:09.769Z,1520514909.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:10.172Z,1520514910.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:10.597Z,1520514910.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:10.966Z,1520514910.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:11.374Z,1520514911.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:11.768Z,1520514911.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:12.168Z,1520514912.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:12.566Z,1520514912.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:12.997Z,1520514912.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:13.374Z,1520514913.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:13.780Z,1520514913.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:14.169Z,1520514914.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:14.570Z,1520514914.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:14.968Z,1520514914.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:15.371Z,1520514915.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:15.772Z,1520514915.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:16.176Z,1520514916.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:16.572Z,1520514916.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:16.968Z,1520514916.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:17.370Z,1520514917.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:17.773Z,1520514917.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:18.176Z,1520514918.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:18.576Z,1520514918.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:18.972Z,1520514918.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:19.372Z,1520514919.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:19.777Z,1520514919.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:20.177Z,1520514920.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:20.576Z,1520514920.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:20.976Z,1520514920.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:21.411Z,1520514921.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:21.786Z,1520514921.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:22.175Z,1520514922.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:22.574Z,1520514922.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:22.984Z,1520514922.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:23.386Z,1520514923.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:23.781Z,1520514923.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:24.178Z,1520514924.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:24.563Z,1520514924.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:24.976Z,1520514924.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:25.388Z,1520514925.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:25.782Z,1520514925.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:26.191Z,1520514926.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:26.584Z,1520514926.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:26.964Z,1520514926.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:27.359Z,1520514927.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:27.787Z,1520514927.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:28.188Z,1520514928.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:28.592Z,1520514928.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:28.963Z,1520514928.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:29.367Z,1520514929.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:29.767Z,1520514929.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:30.170Z,1520514930.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:30.564Z,1520514930.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:30.993Z,1520514930.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:31.376Z,1520514931.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:31.769Z,1520514931.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:32.168Z,1520514932.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:32.568Z,1520514932.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:32.969Z,1520514932.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:33.366Z,1520514933.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:33.796Z,1520514933.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:34.170Z,1520514934.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:34.569Z,1520514934.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:34.974Z,1520514934.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:35.370Z,1520514935.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:35.775Z,1520514935.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:36.175Z,1520514936.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:36.576Z,1520514936.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:36.967Z,1520514936.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:37.366Z,1520514937.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:37.786Z,1520514937.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:38.188Z,1520514938.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:38.598Z,1520514938.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:38.963Z,1520514938.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:39.364Z,1520514939.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:39.764Z,1520514939.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:40.170Z,1520514940.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:40.602Z,1520514940.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:41.008Z,1520514941.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:41.419Z,1520514941.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:41.802Z,1520514941.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:42.252Z,1520514942.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:42.621Z,1520514942.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:43.089Z,1520514943.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:43.375Z,1520514943.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:43.785Z,1520514943.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:44.187Z,1520514944.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:44.190Z,1520514944.190 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T13:10:43.0Z
2018-03-08T13:15:44.190Z,1520514944.190 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T13:15:44.190Z,1520514944.190 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T13:15:44.628Z,1520514944.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:49.270Z,1520514949.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:49.395Z,1520514949.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:49.739Z,1520514949.739 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0128.lzma
2018-03-08T13:15:49.806Z,1520514949.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:50.202Z,1520514950.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:50.538Z,1520514950.538 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0128.lzma.bak
2018-03-08T13:15:50.539Z,1520514950.539 [DataOverHttps](INFO): SBD MOMSN=7985971
2018-03-08T13:15:50.611Z,1520514950.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:51.149Z,1520514951.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:51.419Z,1520514951.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:55.350Z,1520514955.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:55.488Z,1520514955.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:55.846Z,1520514955.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:56.252Z,1520514956.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:56.650Z,1520514956.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:57.027Z,1520514957.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:15:57.419Z,1520514957.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:00.715Z,1520514960.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:00.847Z,1520514960.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:01.153Z,1520514961.153 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0129.lzma
2018-03-08T13:16:01.218Z,1520514961.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:01.603Z,1520514961.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:01.950Z,1520514961.950 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0129.lzma.bak
2018-03-08T13:16:01.950Z,1520514961.950 [DataOverHttps](INFO): SBD MOMSN=7985973
2018-03-08T13:16:02.017Z,1520514962.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:02.564Z,1520514962.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:02.567Z,1520514962.567 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T13:16:02.567Z,1520514962.567 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T13:16:02.567Z,1520514962.567 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T13:16:02.823Z,1520514962.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:06.498Z,1520514966.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:06.631Z,1520514966.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:06.980Z,1520514966.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:07.376Z,1520514967.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:07.775Z,1520514967.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:08.174Z,1520514968.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:08.571Z,1520514968.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:08.972Z,1520514968.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:09.370Z,1520514969.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:09.776Z,1520514969.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:10.181Z,1520514970.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:10.576Z,1520514970.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:10.972Z,1520514970.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:11.370Z,1520514971.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:11.782Z,1520514971.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:12.180Z,1520514972.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:12.586Z,1520514972.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:12.970Z,1520514972.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:13.367Z,1520514973.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:13.786Z,1520514973.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:14.180Z,1520514974.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:14.580Z,1520514974.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:14.979Z,1520514974.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:15.374Z,1520514975.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:15.781Z,1520514975.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:16.175Z,1520514976.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:16.577Z,1520514976.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:16.975Z,1520514976.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:17.367Z,1520514977.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:17.778Z,1520514977.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:18.182Z,1520514978.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:18.578Z,1520514978.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:18.970Z,1520514978.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:19.372Z,1520514979.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:19.776Z,1520514979.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:20.181Z,1520514980.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:20.589Z,1520514980.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:20.967Z,1520514980.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:21.378Z,1520514981.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:21.788Z,1520514981.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:22.183Z,1520514982.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:22.650Z,1520514982.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:22.963Z,1520514982.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:23.359Z,1520514983.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:23.763Z,1520514983.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:24.167Z,1520514984.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:24.562Z,1520514984.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:24.988Z,1520514984.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:25.449Z,1520514985.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:25.788Z,1520514985.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:26.163Z,1520514986.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:26.567Z,1520514986.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:26.967Z,1520514986.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:27.368Z,1520514987.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:27.788Z,1520514987.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:28.187Z,1520514988.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:28.572Z,1520514988.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:28.977Z,1520514988.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:29.369Z,1520514989.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:29.782Z,1520514989.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:30.177Z,1520514990.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:30.582Z,1520514990.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:30.971Z,1520514990.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:31.378Z,1520514991.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:31.780Z,1520514991.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:32.180Z,1520514992.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:32.580Z,1520514992.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:32.971Z,1520514992.971 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:32.971Z,1520514992.971 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 111
2018-03-08T13:16:32.971Z,1520514992.971 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T13:16:32.973Z,1520514992.973 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:32.973Z,1520514992.973 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 111
2018-03-08T13:16:32.973Z,1520514992.973 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T13:16:32.974Z,1520514992.974 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:32.975Z,1520514992.975 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 111
2018-03-08T13:16:32.975Z,1520514992.975 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T13:16:32.986Z,1520514992.986 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T13:16:32.987Z,1520514992.987 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T13:16:32.987Z,1520514992.987 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T13:16:33.398Z,1520514993.398 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T13:16:33.398Z,1520514993.398 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 111
2018-03-08T13:16:33.398Z,1520514993.398 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T13:16:33.398Z,1520514993.398 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 111
2018-03-08T13:16:33.399Z,1520514993.399 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T13:16:33.399Z,1520514993.399 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 111
2018-03-08T13:16:33.789Z,1520514993.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T13:16:33.790Z,1520514993.790 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:16:33.790Z,1520514993.790 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:16:33.791Z,1520514993.791 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T13:16:33.791Z,1520514993.791 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:16:33.791Z,1520514993.791 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:16:33.792Z,1520514993.792 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T13:16:33.792Z,1520514993.792 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:16:33.797Z,1520514993.797 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:16:34.167Z,1520514994.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T13:16:34.168Z,1520514994.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:34.565Z,1520514994.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T13:16:34.566Z,1520514994.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:34.973Z,1520514994.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T13:16:34.973Z,1520514994.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:35.372Z,1520514995.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T13:16:35.373Z,1520514995.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:35.774Z,1520514995.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T13:16:35.775Z,1520514995.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:36.170Z,1520514996.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T13:16:36.171Z,1520514996.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:36.568Z,1520514996.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T13:16:36.569Z,1520514996.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:36.969Z,1520514996.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T13:16:36.970Z,1520514996.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:37.368Z,1520514997.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T13:16:37.369Z,1520514997.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:37.780Z,1520514997.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T13:16:37.797Z,1520514997.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:38.178Z,1520514998.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T13:16:38.201Z,1520514998.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:38.576Z,1520514998.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T13:16:38.577Z,1520514998.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:38.970Z,1520514998.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T13:16:38.971Z,1520514998.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:39.368Z,1520514999.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T13:16:39.369Z,1520514999.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:39.771Z,1520514999.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T13:16:39.772Z,1520514999.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:40.172Z,1520515000.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T13:16:40.173Z,1520515000.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:40.570Z,1520515000.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T13:16:40.571Z,1520515000.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:40.978Z,1520515000.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T13:16:40.979Z,1520515000.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:41.377Z,1520515001.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T13:16:41.377Z,1520515001.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:41.782Z,1520515001.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T13:16:41.783Z,1520515001.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:42.171Z,1520515002.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T13:16:42.172Z,1520515002.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:42.571Z,1520515002.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T13:16:42.572Z,1520515002.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:42.970Z,1520515002.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T13:16:42.971Z,1520515002.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:43.367Z,1520515003.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T13:16:43.368Z,1520515003.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:43.783Z,1520515003.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T13:16:43.784Z,1520515003.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:44.176Z,1520515004.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T13:16:44.177Z,1520515004.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:44.579Z,1520515004.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T13:16:44.580Z,1520515004.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:44.970Z,1520515004.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T13:16:44.971Z,1520515004.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:45.370Z,1520515005.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T13:16:45.371Z,1520515005.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:45.779Z,1520515005.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T13:16:45.780Z,1520515005.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:46.170Z,1520515006.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T13:16:46.171Z,1520515006.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:46.568Z,1520515006.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T13:16:46.569Z,1520515006.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:46.979Z,1520515006.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T13:16:46.980Z,1520515006.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:47.379Z,1520515007.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T13:16:47.379Z,1520515007.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:47.782Z,1520515007.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T13:16:47.783Z,1520515007.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:48.170Z,1520515008.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T13:16:48.171Z,1520515008.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:48.571Z,1520515008.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T13:16:48.572Z,1520515008.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:48.968Z,1520515008.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T13:16:48.969Z,1520515008.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:49.367Z,1520515009.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T13:16:49.368Z,1520515009.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:49.787Z,1520515009.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T13:16:49.788Z,1520515009.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:50.179Z,1520515010.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T13:16:50.180Z,1520515010.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:50.592Z,1520515010.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T13:16:50.593Z,1520515010.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:50.979Z,1520515010.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T13:16:50.979Z,1520515010.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:51.363Z,1520515011.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T13:16:51.364Z,1520515011.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:51.790Z,1520515011.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T13:16:51.791Z,1520515011.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:52.185Z,1520515012.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T13:16:52.186Z,1520515012.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:52.583Z,1520515012.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T13:16:52.584Z,1520515012.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:52.966Z,1520515012.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T13:16:52.967Z,1520515012.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:53.362Z,1520515013.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:53.766Z,1520515013.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:54.166Z,1520515014.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:54.564Z,1520515014.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:54.991Z,1520515014.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:55.388Z,1520515015.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:55.776Z,1520515015.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:56.167Z,1520515016.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:56.567Z,1520515016.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:56.975Z,1520515016.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:57.374Z,1520515017.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:57.776Z,1520515017.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:58.210Z,1520515018.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:58.576Z,1520515018.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:59.004Z,1520515019.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:59.378Z,1520515019.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:16:59.776Z,1520515019.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:00.181Z,1520515020.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:00.587Z,1520515020.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:00.971Z,1520515020.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:01.374Z,1520515021.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:01.786Z,1520515021.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:02.180Z,1520515022.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:02.579Z,1520515022.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:02.971Z,1520515022.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:03.368Z,1520515023.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:06.521Z,1520515026.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:06.663Z,1520515026.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:07.012Z,1520515027.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:07.410Z,1520515027.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:07.808Z,1520515027.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:08.209Z,1520515028.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:08.589Z,1520515028.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:08.987Z,1520515028.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:09.389Z,1520515029.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:09.811Z,1520515029.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:10.212Z,1520515030.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:10.609Z,1520515030.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:11.035Z,1520515031.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:11.410Z,1520515031.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:11.820Z,1520515031.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:12.218Z,1520515032.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:12.594Z,1520515032.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:13.016Z,1520515033.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:13.424Z,1520515033.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:13.816Z,1520515033.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:14.194Z,1520515034.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:14.586Z,1520515034.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:14.995Z,1520515034.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:15.393Z,1520515035.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:15.820Z,1520515035.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:16.200Z,1520515036.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:16.592Z,1520515036.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:16.992Z,1520515036.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:17.392Z,1520515037.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:17.792Z,1520515037.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:18.193Z,1520515038.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:18.592Z,1520515038.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:19.004Z,1520515039.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:19.406Z,1520515039.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:19.797Z,1520515039.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:20.196Z,1520515040.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:20.638Z,1520515040.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:21.004Z,1520515041.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:21.396Z,1520515041.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:21.882Z,1520515041.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:22.199Z,1520515042.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:22.606Z,1520515042.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:23.009Z,1520515043.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:23.402Z,1520515043.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:23.802Z,1520515043.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:24.203Z,1520515044.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:24.600Z,1520515044.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:25.005Z,1520515045.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:25.409Z,1520515045.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:25.805Z,1520515045.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:26.201Z,1520515046.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:26.606Z,1520515046.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:27.010Z,1520515047.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:27.414Z,1520515047.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:27.859Z,1520515047.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:28.206Z,1520515048.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:28.606Z,1520515048.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:29.003Z,1520515049.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:29.383Z,1520515049.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:29.786Z,1520515049.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:30.255Z,1520515050.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:30.615Z,1520515050.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:31.007Z,1520515051.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:31.457Z,1520515051.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:31.807Z,1520515051.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:32.211Z,1520515052.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:32.594Z,1520515052.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:33.020Z,1520515053.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:33.418Z,1520515053.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:33.814Z,1520515053.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:34.189Z,1520515054.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:34.609Z,1520515054.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:34.988Z,1520515054.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:35.391Z,1520515055.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:35.788Z,1520515055.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:36.192Z,1520515056.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:36.587Z,1520515056.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:37.012Z,1520515057.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:37.415Z,1520515057.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:37.789Z,1520515057.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:38.191Z,1520515058.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:38.591Z,1520515058.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:38.988Z,1520515058.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:39.387Z,1520515059.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:39.816Z,1520515059.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:40.189Z,1520515060.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:40.611Z,1520515060.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:40.991Z,1520515060.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:41.422Z,1520515061.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:41.814Z,1520515061.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:42.220Z,1520515062.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:42.611Z,1520515062.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:43.054Z,1520515063.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:43.414Z,1520515063.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:43.802Z,1520515063.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:44.207Z,1520515064.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:44.614Z,1520515064.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:45.015Z,1520515065.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:45.388Z,1520515065.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:45.808Z,1520515065.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:46.211Z,1520515066.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:46.607Z,1520515066.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:46.990Z,1520515066.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:47.384Z,1520515067.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:47.787Z,1520515067.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:48.225Z,1520515068.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:48.612Z,1520515068.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:49.007Z,1520515069.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:49.414Z,1520515069.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:49.788Z,1520515069.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:50.187Z,1520515070.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:50.585Z,1520515070.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:51.010Z,1520515071.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:51.390Z,1520515071.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:51.818Z,1520515071.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:52.189Z,1520515072.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:52.612Z,1520515072.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:52.987Z,1520515072.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:53.389Z,1520515073.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:53.794Z,1520515073.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:54.222Z,1520515074.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:54.584Z,1520515074.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:55.012Z,1520515075.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:55.422Z,1520515075.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:55.814Z,1520515075.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:56.191Z,1520515076.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:56.592Z,1520515076.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:56.989Z,1520515076.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:57.437Z,1520515077.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:57.809Z,1520515077.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:58.219Z,1520515078.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:58.611Z,1520515078.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:59.008Z,1520515079.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:59.384Z,1520515079.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:17:59.810Z,1520515079.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:00.188Z,1520515080.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:00.591Z,1520515080.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:01.016Z,1520515081.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:01.419Z,1520515081.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:01.788Z,1520515081.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:02.187Z,1520515082.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:02.589Z,1520515082.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:02.984Z,1520515082.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:03.389Z,1520515083.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:06.835Z,1520515086.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:06.996Z,1520515086.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:07.392Z,1520515087.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:07.776Z,1520515087.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:08.161Z,1520515088.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:08.568Z,1520515088.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:08.999Z,1520515088.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:09.369Z,1520515089.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:09.765Z,1520515089.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:10.162Z,1520515090.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:10.563Z,1520515090.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:10.967Z,1520515090.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:11.363Z,1520515091.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:11.769Z,1520515091.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:12.176Z,1520515092.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:12.615Z,1520515092.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:12.960Z,1520515092.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:13.380Z,1520515093.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:13.766Z,1520515093.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:14.168Z,1520515094.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:14.571Z,1520515094.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:14.976Z,1520515094.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:15.416Z,1520515095.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:15.773Z,1520515095.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:16.195Z,1520515096.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:16.579Z,1520515096.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:16.971Z,1520515096.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:17.382Z,1520515097.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:17.777Z,1520515097.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:18.186Z,1520515098.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:18.586Z,1520515098.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:18.979Z,1520515098.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:19.390Z,1520515099.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:19.785Z,1520515099.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:20.184Z,1520515100.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:20.590Z,1520515100.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:21.046Z,1520515101.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:21.383Z,1520515101.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:21.847Z,1520515101.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:22.211Z,1520515102.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:22.594Z,1520515102.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:22.968Z,1520515102.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:23.363Z,1520515103.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:23.787Z,1520515103.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:24.192Z,1520515104.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:24.592Z,1520515104.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:24.968Z,1520515104.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:25.366Z,1520515105.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:25.772Z,1520515105.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:26.173Z,1520515106.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:26.572Z,1520515106.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:26.967Z,1520515106.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:27.366Z,1520515107.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:27.779Z,1520515107.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:28.179Z,1520515108.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:28.573Z,1520515108.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:28.968Z,1520515108.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:29.370Z,1520515109.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:29.773Z,1520515109.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:30.180Z,1520515110.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:30.577Z,1520515110.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:30.976Z,1520515110.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:31.418Z,1520515111.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:31.818Z,1520515111.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:32.178Z,1520515112.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:32.586Z,1520515112.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:32.971Z,1520515112.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:33.368Z,1520515113.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:33.771Z,1520515113.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:34.167Z,1520515114.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:34.572Z,1520515114.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:34.974Z,1520515114.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:35.381Z,1520515115.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:35.781Z,1520515115.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:36.168Z,1520515116.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:36.566Z,1520515116.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:36.969Z,1520515116.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:37.368Z,1520515117.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:37.777Z,1520515117.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:38.175Z,1520515118.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:38.575Z,1520515118.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:38.975Z,1520515118.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:39.374Z,1520515119.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:39.785Z,1520515119.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:40.181Z,1520515120.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:40.598Z,1520515120.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:40.978Z,1520515120.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:41.358Z,1520515121.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:41.785Z,1520515121.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:42.194Z,1520515122.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:42.560Z,1520515122.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:42.997Z,1520515122.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:43.403Z,1520515123.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:43.804Z,1520515123.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:44.164Z,1520515124.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:44.637Z,1520515124.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:44.986Z,1520515124.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:45.383Z,1520515125.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:45.828Z,1520515125.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:46.198Z,1520515126.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:46.595Z,1520515126.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:46.968Z,1520515126.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:47.366Z,1520515127.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:47.762Z,1520515127.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:48.217Z,1520515128.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:48.594Z,1520515128.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:48.967Z,1520515128.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:49.398Z,1520515129.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:49.779Z,1520515129.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:50.164Z,1520515130.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:50.566Z,1520515130.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:50.978Z,1520515130.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:51.375Z,1520515131.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:51.815Z,1520515131.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:52.175Z,1520515132.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:52.583Z,1520515132.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:52.987Z,1520515132.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:53.387Z,1520515133.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:53.782Z,1520515133.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:54.187Z,1520515134.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:54.587Z,1520515134.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:54.959Z,1520515134.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:55.363Z,1520515135.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:55.863Z,1520515135.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:56.168Z,1520515136.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:56.593Z,1520515136.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:57.002Z,1520515137.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:57.362Z,1520515137.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:57.767Z,1520515137.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:58.208Z,1520515138.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:58.575Z,1520515138.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:58.971Z,1520515138.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:59.401Z,1520515139.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:18:59.781Z,1520515139.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:00.195Z,1520515140.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:00.571Z,1520515140.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:00.969Z,1520515140.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:01.378Z,1520515141.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:01.786Z,1520515141.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:02.182Z,1520515142.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:02.573Z,1520515142.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:02.981Z,1520515142.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:03.388Z,1520515143.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:03.794Z,1520515143.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:07.060Z,1520515147.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:07.219Z,1520515147.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:07.581Z,1520515147.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:07.983Z,1520515147.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:08.359Z,1520515148.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:08.835Z,1520515148.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:09.164Z,1520515149.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:09.567Z,1520515149.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:09.971Z,1520515149.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:10.355Z,1520515150.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:10.765Z,1520515150.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:11.162Z,1520515151.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:11.570Z,1520515151.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:11.953Z,1520515151.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:12.366Z,1520515152.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:12.765Z,1520515152.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:13.195Z,1520515153.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:13.563Z,1520515153.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:13.961Z,1520515153.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:14.355Z,1520515154.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:14.764Z,1520515154.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:15.177Z,1520515155.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:15.567Z,1520515155.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:15.961Z,1520515155.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:16.425Z,1520515156.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:16.765Z,1520515156.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:17.169Z,1520515157.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:17.571Z,1520515157.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:17.961Z,1520515157.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:18.361Z,1520515158.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:18.774Z,1520515158.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:19.167Z,1520515159.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:19.611Z,1520515159.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:19.966Z,1520515159.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:20.365Z,1520515160.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:20.761Z,1520515160.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:21.213Z,1520515161.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:21.563Z,1520515161.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:21.979Z,1520515161.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:22.375Z,1520515162.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:22.764Z,1520515162.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:23.162Z,1520515163.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:23.577Z,1520515163.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:23.981Z,1520515163.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:24.363Z,1520515164.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:24.770Z,1520515164.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:25.169Z,1520515165.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:25.564Z,1520515165.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:25.967Z,1520515165.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:26.361Z,1520515166.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:26.768Z,1520515166.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:27.203Z,1520515167.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:27.568Z,1520515167.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:27.950Z,1520515167.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:28.347Z,1520515168.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:28.776Z,1520515168.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:29.182Z,1520515169.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:29.585Z,1520515169.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:29.975Z,1520515169.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:30.385Z,1520515170.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:30.755Z,1520515170.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:31.202Z,1520515171.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:31.555Z,1520515171.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:31.967Z,1520515171.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:32.367Z,1520515172.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:32.764Z,1520515172.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:33.159Z,1520515173.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:33.551Z,1520515173.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:33.955Z,1520515173.955 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:33.955Z,1520515173.955 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 112
2018-03-08T13:19:33.955Z,1520515173.955 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T13:19:33.957Z,1520515173.957 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:33.957Z,1520515173.957 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 112
2018-03-08T13:19:33.957Z,1520515173.957 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T13:19:33.959Z,1520515173.959 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:33.959Z,1520515173.959 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 112
2018-03-08T13:19:33.959Z,1520515173.959 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T13:19:33.971Z,1520515173.971 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T13:19:33.971Z,1520515173.971 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T13:19:33.971Z,1520515173.971 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T13:19:34.372Z,1520515174.372 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T13:19:34.372Z,1520515174.372 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 112
2018-03-08T13:19:34.372Z,1520515174.372 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T13:19:34.372Z,1520515174.372 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 112
2018-03-08T13:19:34.373Z,1520515174.373 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T13:19:34.373Z,1520515174.373 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 112
2018-03-08T13:19:34.767Z,1520515174.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T13:19:34.767Z,1520515174.767 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:19:34.768Z,1520515174.768 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:19:34.768Z,1520515174.768 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T13:19:34.769Z,1520515174.769 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:19:34.769Z,1520515174.769 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:19:34.769Z,1520515174.769 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T13:19:34.770Z,1520515174.770 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:19:34.770Z,1520515174.770 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:19:35.167Z,1520515175.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T13:19:35.167Z,1520515175.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:35.572Z,1520515175.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T13:19:35.573Z,1520515175.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:35.951Z,1520515175.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T13:19:35.953Z,1520515175.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:36.370Z,1520515176.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T13:19:36.371Z,1520515176.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:36.769Z,1520515176.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T13:19:36.769Z,1520515176.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:37.179Z,1520515177.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T13:19:37.179Z,1520515177.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:37.568Z,1520515177.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T13:19:37.569Z,1520515177.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:37.966Z,1520515177.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T13:19:37.967Z,1520515177.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:38.367Z,1520515178.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T13:19:38.368Z,1520515178.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:38.770Z,1520515178.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T13:19:38.771Z,1520515178.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:39.209Z,1520515179.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-08T13:19:39.210Z,1520515179.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:39.567Z,1520515179.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T13:19:39.568Z,1520515179.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:39.962Z,1520515179.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T13:19:39.963Z,1520515179.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:40.373Z,1520515180.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T13:19:40.374Z,1520515180.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:40.778Z,1520515180.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T13:19:40.779Z,1520515180.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:41.211Z,1520515181.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-08T13:19:41.212Z,1520515181.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:41.582Z,1520515181.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T13:19:41.583Z,1520515181.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:41.975Z,1520515181.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T13:19:41.975Z,1520515181.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:42.550Z,1520515182.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2018-03-08T13:19:42.551Z,1520515182.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:42.895Z,1520515182.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-08T13:19:42.896Z,1520515182.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:43.184Z,1520515183.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T13:19:43.193Z,1520515183.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:43.595Z,1520515183.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T13:19:43.596Z,1520515183.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:44.052Z,1520515184.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T13:19:44.054Z,1520515184.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:44.375Z,1520515184.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T13:19:44.379Z,1520515184.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:44.772Z,1520515184.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T13:19:44.773Z,1520515184.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:45.148Z,1520515185.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T13:19:45.149Z,1520515185.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:45.559Z,1520515185.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T13:19:45.560Z,1520515185.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:45.951Z,1520515185.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T13:19:45.951Z,1520515185.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:46.354Z,1520515186.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T13:19:46.355Z,1520515186.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:46.782Z,1520515186.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T13:19:46.783Z,1520515186.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:47.210Z,1520515187.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-08T13:19:47.211Z,1520515187.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:47.584Z,1520515187.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T13:19:47.585Z,1520515187.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:47.953Z,1520515187.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T13:19:47.954Z,1520515187.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:48.355Z,1520515188.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T13:19:48.356Z,1520515188.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:48.784Z,1520515188.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T13:19:48.785Z,1520515188.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:49.182Z,1520515189.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T13:19:49.183Z,1520515189.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:49.556Z,1520515189.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T13:19:49.557Z,1520515189.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:49.954Z,1520515189.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T13:19:49.955Z,1520515189.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:50.358Z,1520515190.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T13:19:50.359Z,1520515190.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:50.787Z,1520515190.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T13:19:50.788Z,1520515190.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:51.163Z,1520515191.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T13:19:51.164Z,1520515191.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:51.562Z,1520515191.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T13:19:51.563Z,1520515191.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:51.966Z,1520515191.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T13:19:51.967Z,1520515191.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:52.358Z,1520515192.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T13:19:52.359Z,1520515192.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:52.763Z,1520515192.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T13:19:52.764Z,1520515192.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:53.163Z,1520515193.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T13:19:53.165Z,1520515193.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:53.563Z,1520515193.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T13:19:53.565Z,1520515193.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:53.976Z,1520515193.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:54.363Z,1520515194.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:54.763Z,1520515194.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:55.202Z,1520515195.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:55.574Z,1520515195.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:55.990Z,1520515195.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:56.352Z,1520515196.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:56.770Z,1520515196.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:57.174Z,1520515197.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:57.571Z,1520515197.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:57.973Z,1520515197.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:58.346Z,1520515198.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:58.772Z,1520515198.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:59.181Z,1520515199.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:59.578Z,1520515199.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:19:59.955Z,1520515199.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:00.358Z,1520515200.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:00.779Z,1520515200.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:01.183Z,1520515201.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:01.587Z,1520515201.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:02.023Z,1520515202.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:02.385Z,1520515202.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:02.783Z,1520515202.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:03.163Z,1520515203.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:03.564Z,1520515203.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:03.955Z,1520515203.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:07.087Z,1520515207.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:07.231Z,1520515207.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:07.594Z,1520515207.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:07.967Z,1520515207.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:08.359Z,1520515208.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:08.759Z,1520515208.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:09.159Z,1520515209.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:09.560Z,1520515209.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:09.989Z,1520515209.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:10.364Z,1520515210.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:10.766Z,1520515210.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:11.159Z,1520515211.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:11.559Z,1520515211.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:11.963Z,1520515211.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:12.367Z,1520515212.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:12.795Z,1520515212.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:13.162Z,1520515213.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:13.564Z,1520515213.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:13.958Z,1520515213.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:14.363Z,1520515214.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:14.764Z,1520515214.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:15.168Z,1520515215.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:15.565Z,1520515215.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:15.962Z,1520515215.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:16.362Z,1520515216.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:16.763Z,1520515216.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:17.164Z,1520515217.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:17.570Z,1520515217.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:17.959Z,1520515217.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:18.366Z,1520515218.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:18.764Z,1520515218.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:19.166Z,1520515219.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:19.565Z,1520515219.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:19.963Z,1520515219.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:20.355Z,1520515220.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:20.764Z,1520515220.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:21.169Z,1520515221.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:21.565Z,1520515221.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:21.963Z,1520515221.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:22.373Z,1520515222.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:22.771Z,1520515222.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:23.214Z,1520515223.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:23.598Z,1520515223.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:23.953Z,1520515223.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:24.361Z,1520515224.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:24.802Z,1520515224.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:25.174Z,1520515225.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:25.574Z,1520515225.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:25.978Z,1520515225.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:26.364Z,1520515226.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:26.770Z,1520515226.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:27.169Z,1520515227.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:27.566Z,1520515227.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:27.969Z,1520515227.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:28.366Z,1520515228.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:28.771Z,1520515228.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:29.186Z,1520515229.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:29.572Z,1520515229.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:29.964Z,1520515229.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:30.359Z,1520515230.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:30.773Z,1520515230.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:31.169Z,1520515231.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:31.568Z,1520515231.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:31.962Z,1520515231.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:32.365Z,1520515232.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:32.769Z,1520515232.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:33.172Z,1520515233.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:33.573Z,1520515233.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:33.964Z,1520515233.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:34.361Z,1520515234.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:34.766Z,1520515234.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:35.172Z,1520515235.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:35.583Z,1520515235.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:35.964Z,1520515235.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:36.359Z,1520515236.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:36.772Z,1520515236.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:37.169Z,1520515237.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:37.569Z,1520515237.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:37.962Z,1520515237.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:38.360Z,1520515238.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:38.768Z,1520515238.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:39.168Z,1520515239.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:39.564Z,1520515239.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:39.959Z,1520515239.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:40.362Z,1520515240.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:40.764Z,1520515240.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:41.172Z,1520515241.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:41.572Z,1520515241.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:41.970Z,1520515241.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:42.359Z,1520515242.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:42.782Z,1520515242.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:43.184Z,1520515243.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:43.570Z,1520515243.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:43.966Z,1520515243.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:44.372Z,1520515244.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:44.798Z,1520515244.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:45.181Z,1520515245.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:45.576Z,1520515245.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:45.979Z,1520515245.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:46.431Z,1520515246.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:46.769Z,1520515246.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:47.187Z,1520515247.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:47.586Z,1520515247.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:47.958Z,1520515247.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:48.362Z,1520515248.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:48.790Z,1520515248.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:49.157Z,1520515249.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:49.561Z,1520515249.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:49.992Z,1520515249.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:50.363Z,1520515250.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:50.775Z,1520515250.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:51.174Z,1520515251.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:51.604Z,1520515251.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:51.962Z,1520515251.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:52.362Z,1520515252.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:52.760Z,1520515252.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:53.159Z,1520515253.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:53.559Z,1520515253.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:53.975Z,1520515253.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:54.371Z,1520515254.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:54.772Z,1520515254.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:55.159Z,1520515255.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:55.562Z,1520515255.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:55.960Z,1520515255.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:56.366Z,1520515256.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:56.779Z,1520515256.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:57.218Z,1520515257.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:57.572Z,1520515257.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:57.965Z,1520515257.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:58.362Z,1520515258.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:58.769Z,1520515258.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:59.201Z,1520515259.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:59.598Z,1520515259.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:20:59.958Z,1520515259.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:00.367Z,1520515260.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:00.835Z,1520515260.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:01.173Z,1520515261.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:01.569Z,1520515261.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:02.067Z,1520515262.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:02.360Z,1520515262.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:02.775Z,1520515262.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:03.186Z,1520515263.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:03.189Z,1520515263.189 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T13:21:03.189Z,1520515263.189 [Default:CheckIn:C.Wait] Stopped
2018-03-08T13:21:03.190Z,1520515263.190 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T13:21:03.190Z,1520515263.190 [Default:CheckIn:D] Running Loop=1
2018-03-08T13:21:03.574Z,1520515263.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:03.577Z,1520515263.577 [Default:CheckIn:D] Stopped
2018-03-08T13:21:03.577Z,1520515263.577 [Default:CheckIn:E] Running Loop=1
2018-03-08T13:21:03.969Z,1520515263.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:03.972Z,1520515263.972 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 335.312858 min 
2018-03-08T13:21:03.973Z,1520515263.973 [Default:CheckIn:E] Stopped
2018-03-08T13:21:03.973Z,1520515263.973 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T13:21:03.973Z,1520515263.973 [Default:CheckIn] Stopped
2018-03-08T13:21:03.973Z,1520515263.973 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T13:21:03.973Z,1520515263.973 [Default:CheckIn](INFO): Running loop #33
2018-03-08T13:21:03.973Z,1520515263.973 [Default:CheckIn] Running Loop=33
2018-03-08T13:21:03.973Z,1520515263.973 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T13:21:03.973Z,1520515263.973 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T13:21:07.113Z,1520515267.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:07.268Z,1520515267.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:07.615Z,1520515267.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:07.992Z,1520515267.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:08.383Z,1520515268.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:08.785Z,1520515268.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:09.187Z,1520515269.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:09.586Z,1520515269.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:09.994Z,1520515269.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:10.417Z,1520515270.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:10.792Z,1520515270.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:11.182Z,1520515271.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:11.587Z,1520515271.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:12.021Z,1520515272.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:12.386Z,1520515272.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:12.792Z,1520515272.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:13.188Z,1520515273.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:13.591Z,1520515273.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:13.988Z,1520515273.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:14.379Z,1520515274.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:14.782Z,1520515274.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:15.190Z,1520515275.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:15.585Z,1520515275.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:15.998Z,1520515275.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:16.396Z,1520515276.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:16.791Z,1520515276.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:17.186Z,1520515277.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:17.587Z,1520515277.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:17.985Z,1520515277.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:18.386Z,1520515278.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:18.797Z,1520515278.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:19.192Z,1520515279.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:19.591Z,1520515279.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:19.988Z,1520515279.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:20.385Z,1520515280.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:20.783Z,1520515280.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:21.191Z,1520515281.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:21.586Z,1520515281.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:21.995Z,1520515281.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:22.400Z,1520515282.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:22.827Z,1520515282.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:23.189Z,1520515283.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:23.601Z,1520515283.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:24.001Z,1520515284.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:24.393Z,1520515284.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:24.805Z,1520515284.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:25.207Z,1520515285.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:25.598Z,1520515285.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:25.983Z,1520515285.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:26.397Z,1520515286.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:26.794Z,1520515286.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:27.214Z,1520515287.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:27.581Z,1520515287.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:28.004Z,1520515288.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:28.412Z,1520515288.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:28.815Z,1520515288.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:29.211Z,1520515289.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:29.583Z,1520515289.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:29.987Z,1520515289.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:30.389Z,1520515290.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:30.788Z,1520515290.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:31.190Z,1520515291.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:31.589Z,1520515291.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:32.026Z,1520515292.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:32.384Z,1520515292.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:32.785Z,1520515292.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:33.183Z,1520515293.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:33.597Z,1520515293.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:33.999Z,1520515293.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:34.398Z,1520515294.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:34.796Z,1520515294.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:35.186Z,1520515295.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:35.586Z,1520515295.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:35.987Z,1520515295.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:36.389Z,1520515296.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:36.800Z,1520515296.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:37.201Z,1520515297.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:37.595Z,1520515297.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:37.991Z,1520515297.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:38.389Z,1520515298.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:38.788Z,1520515298.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:39.193Z,1520515299.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:39.588Z,1520515299.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:39.998Z,1520515299.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:40.397Z,1520515300.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:40.798Z,1520515300.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:41.201Z,1520515301.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:41.592Z,1520515301.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:41.990Z,1520515301.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:42.390Z,1520515302.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:42.794Z,1520515302.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:43.201Z,1520515303.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:43.592Z,1520515303.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:43.992Z,1520515303.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:44.394Z,1520515304.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:44.789Z,1520515304.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:45.191Z,1520515305.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:45.594Z,1520515305.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:45.994Z,1520515305.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:46.394Z,1520515306.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:46.797Z,1520515306.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:47.199Z,1520515307.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:47.595Z,1520515307.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:47.998Z,1520515307.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:48.013Z,1520515308.013 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T13:21:48.393Z,1520515308.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:48.849Z,1520515308.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:49.199Z,1520515309.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:49.600Z,1520515309.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:49.982Z,1520515309.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:50.375Z,1520515310.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:50.788Z,1520515310.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:51.183Z,1520515311.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:51.595Z,1520515311.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:51.996Z,1520515311.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:52.396Z,1520515312.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:52.803Z,1520515312.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:53.194Z,1520515313.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:53.588Z,1520515313.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:53.998Z,1520515313.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:54.387Z,1520515314.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:54.834Z,1520515314.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:55.202Z,1520515315.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:55.596Z,1520515315.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:55.988Z,1520515315.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:56.394Z,1520515316.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:56.793Z,1520515316.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:57.191Z,1520515317.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:57.587Z,1520515317.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:58.002Z,1520515318.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:58.401Z,1520515318.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:58.802Z,1520515318.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:59.193Z,1520515319.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:59.590Z,1520515319.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:21:59.993Z,1520515319.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:00.394Z,1520515320.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:00.816Z,1520515320.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:01.200Z,1520515321.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:01.595Z,1520515321.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:01.998Z,1520515321.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:02.400Z,1520515322.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:02.793Z,1520515322.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:03.203Z,1520515323.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:03.601Z,1520515323.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:04.023Z,1520515324.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:07.161Z,1520515327.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:07.302Z,1520515327.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:07.678Z,1520515327.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:08.054Z,1520515328.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:08.453Z,1520515328.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:08.906Z,1520515328.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:09.276Z,1520515329.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:09.666Z,1520515329.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:10.053Z,1520515330.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:10.455Z,1520515330.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:10.851Z,1520515330.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:11.262Z,1520515331.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:11.660Z,1520515331.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:12.062Z,1520515332.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:12.463Z,1520515332.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:12.868Z,1520515332.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:13.253Z,1520515333.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:13.661Z,1520515333.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:14.039Z,1520515334.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:14.468Z,1520515334.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:14.865Z,1520515334.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:15.275Z,1520515335.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:15.669Z,1520515335.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:16.069Z,1520515336.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:16.445Z,1520515336.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:16.850Z,1520515336.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:17.247Z,1520515337.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:17.734Z,1520515337.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:18.082Z,1520515338.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:18.493Z,1520515338.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:18.888Z,1520515338.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:19.244Z,1520515339.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:19.648Z,1520515339.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:20.048Z,1520515340.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:20.455Z,1520515340.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:20.863Z,1520515340.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:21.265Z,1520515341.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:21.658Z,1520515341.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:22.053Z,1520515342.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:22.467Z,1520515342.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:22.855Z,1520515342.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:23.265Z,1520515343.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:23.660Z,1520515343.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:24.066Z,1520515344.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:24.462Z,1520515344.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:24.884Z,1520515344.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:25.231Z,1520515345.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:25.673Z,1520515345.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:26.063Z,1520515346.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:26.494Z,1520515346.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:26.886Z,1520515346.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:27.282Z,1520515347.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:27.683Z,1520515347.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:28.048Z,1520515348.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:28.487Z,1520515348.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:28.850Z,1520515348.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:29.254Z,1520515349.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:29.649Z,1520515349.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:30.053Z,1520515350.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:30.477Z,1520515350.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:30.899Z,1520515350.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:31.250Z,1520515351.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:31.645Z,1520515351.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:32.050Z,1520515352.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:32.447Z,1520515352.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:32.854Z,1520515352.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:33.252Z,1520515353.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:33.652Z,1520515353.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:34.045Z,1520515354.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:34.462Z,1520515354.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:34.850Z,1520515354.850 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:34.851Z,1520515354.851 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 113
2018-03-08T13:22:34.851Z,1520515354.851 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T13:22:34.853Z,1520515354.853 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:34.853Z,1520515354.853 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 113
2018-03-08T13:22:34.853Z,1520515354.853 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T13:22:34.854Z,1520515354.854 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:34.854Z,1520515354.854 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 113
2018-03-08T13:22:34.855Z,1520515354.855 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T13:22:34.883Z,1520515354.883 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T13:22:34.883Z,1520515354.883 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T13:22:34.883Z,1520515354.883 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T13:22:35.301Z,1520515355.301 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T13:22:35.301Z,1520515355.301 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 113
2018-03-08T13:22:35.301Z,1520515355.301 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T13:22:35.301Z,1520515355.301 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 113
2018-03-08T13:22:35.302Z,1520515355.302 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T13:22:35.302Z,1520515355.302 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 113
2018-03-08T13:22:35.648Z,1520515355.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T13:22:35.649Z,1520515355.649 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:22:35.649Z,1520515355.649 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:22:35.649Z,1520515355.649 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T13:22:35.650Z,1520515355.650 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:22:35.650Z,1520515355.650 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:22:35.650Z,1520515355.650 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T13:22:35.651Z,1520515355.651 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:22:35.651Z,1520515355.651 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:22:36.053Z,1520515356.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T13:22:36.054Z,1520515356.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:36.469Z,1520515356.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T13:22:36.471Z,1520515356.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:36.858Z,1520515356.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T13:22:36.860Z,1520515356.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:37.248Z,1520515357.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T13:22:37.253Z,1520515357.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:37.651Z,1520515357.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T13:22:37.652Z,1520515357.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:38.051Z,1520515358.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T13:22:38.052Z,1520515358.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:38.449Z,1520515358.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T13:22:38.449Z,1520515358.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:38.856Z,1520515358.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T13:22:38.857Z,1520515358.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:39.260Z,1520515359.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T13:22:39.261Z,1520515359.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:39.656Z,1520515359.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T13:22:39.657Z,1520515359.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:40.048Z,1520515360.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T13:22:40.049Z,1520515360.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:40.454Z,1520515360.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T13:22:40.455Z,1520515360.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:40.852Z,1520515360.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T13:22:40.853Z,1520515360.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:41.247Z,1520515361.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T13:22:41.248Z,1520515361.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:41.649Z,1520515361.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T13:22:41.650Z,1520515361.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:42.059Z,1520515362.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T13:22:42.060Z,1520515362.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:42.471Z,1520515362.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T13:22:42.471Z,1520515362.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:42.862Z,1520515362.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T13:22:42.862Z,1520515362.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:43.270Z,1520515363.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T13:22:43.271Z,1520515363.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:43.672Z,1520515363.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T13:22:43.677Z,1520515363.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:44.051Z,1520515364.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T13:22:44.052Z,1520515364.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:44.482Z,1520515364.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T13:22:44.483Z,1520515364.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:44.857Z,1520515364.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T13:22:44.858Z,1520515364.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:45.256Z,1520515365.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T13:22:45.257Z,1520515365.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:45.662Z,1520515365.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T13:22:45.663Z,1520515365.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:46.049Z,1520515366.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T13:22:46.050Z,1520515366.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:46.462Z,1520515366.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T13:22:46.464Z,1520515366.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:46.858Z,1520515366.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T13:22:46.859Z,1520515366.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:47.248Z,1520515367.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T13:22:47.249Z,1520515367.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:47.661Z,1520515367.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T13:22:47.662Z,1520515367.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:48.070Z,1520515368.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T13:22:48.071Z,1520515368.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:48.462Z,1520515368.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T13:22:48.463Z,1520515368.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:48.858Z,1520515368.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T13:22:48.859Z,1520515368.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:49.248Z,1520515369.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T13:22:49.249Z,1520515369.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:49.649Z,1520515369.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T13:22:49.650Z,1520515369.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:50.049Z,1520515370.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T13:22:50.050Z,1520515370.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:50.454Z,1520515370.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T13:22:50.455Z,1520515370.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:50.856Z,1520515370.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T13:22:50.857Z,1520515370.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:51.266Z,1520515371.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T13:22:51.267Z,1520515371.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:51.666Z,1520515371.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T13:22:51.667Z,1520515371.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:52.046Z,1520515372.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T13:22:52.047Z,1520515372.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:52.450Z,1520515372.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T13:22:52.451Z,1520515372.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:52.839Z,1520515372.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T13:22:52.840Z,1520515372.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:53.253Z,1520515373.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T13:22:53.254Z,1520515373.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:53.654Z,1520515373.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T13:22:53.655Z,1520515373.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:54.058Z,1520515374.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T13:22:54.059Z,1520515374.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:54.475Z,1520515374.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T13:22:54.475Z,1520515374.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:54.918Z,1520515374.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:55.267Z,1520515375.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:55.661Z,1520515375.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:56.039Z,1520515376.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:56.443Z,1520515376.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:56.868Z,1520515376.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:57.277Z,1520515377.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:57.668Z,1520515377.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:58.043Z,1520515378.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:58.447Z,1520515378.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:58.844Z,1520515378.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:59.252Z,1520515379.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:22:59.647Z,1520515379.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:00.047Z,1520515380.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:00.452Z,1520515380.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:00.882Z,1520515380.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:01.269Z,1520515381.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:01.741Z,1520515381.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:02.074Z,1520515382.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:02.477Z,1520515382.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:02.854Z,1520515382.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:03.256Z,1520515383.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:03.651Z,1520515383.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:04.041Z,1520515384.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:08.724Z,1520515388.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:08.878Z,1520515388.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:09.215Z,1520515389.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:09.618Z,1520515389.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:10.018Z,1520515390.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:10.398Z,1520515390.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:10.797Z,1520515390.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:11.198Z,1520515391.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:11.593Z,1520515391.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:12.024Z,1520515392.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:12.423Z,1520515392.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:12.796Z,1520515392.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:13.194Z,1520515393.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:13.596Z,1520515393.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:14.007Z,1520515394.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:14.456Z,1520515394.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:14.808Z,1520515394.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:15.209Z,1520515395.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:15.610Z,1520515395.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:16.006Z,1520515396.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:16.407Z,1520515396.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:16.814Z,1520515396.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:17.185Z,1520515397.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:17.639Z,1520515397.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:18.038Z,1520515398.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:18.405Z,1520515398.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:18.806Z,1520515398.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:19.277Z,1520515399.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:19.611Z,1520515399.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:20.002Z,1520515400.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:20.403Z,1520515400.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:20.807Z,1520515400.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:21.218Z,1520515401.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:21.619Z,1520515401.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:22.006Z,1520515402.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:22.422Z,1520515402.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:22.797Z,1520515402.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:23.193Z,1520515403.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:23.594Z,1520515403.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:24.021Z,1520515404.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:24.423Z,1520515404.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:24.807Z,1520515404.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:25.202Z,1520515405.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:25.602Z,1520515405.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:25.999Z,1520515405.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:26.398Z,1520515406.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:26.754Z,1520515406.754 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T13:23:26.754Z,1520515406.754 [NAL9602] Data Fault, FailCount= 2
2018-03-08T13:23:26.754Z,1520515406.754 [NAL9602](ERROR): Data Fault
2018-03-08T13:23:26.813Z,1520515406.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:26.838Z,1520515406.838 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T13:23:27.154Z,1520515407.154 [NAL9602](INFO): Powering down
2018-03-08T13:23:27.216Z,1520515407.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:27.598Z,1520515407.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:27.994Z,1520515407.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:28.007Z,1520515408.007 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T13:23:28.007Z,1520515408.007 [NAL9602] No Fault, FailCount= 2
2018-03-08T13:23:28.399Z,1520515408.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:28.794Z,1520515408.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:29.191Z,1520515409.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:29.595Z,1520515409.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:29.993Z,1520515409.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:30.398Z,1520515410.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:30.802Z,1520515410.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:31.198Z,1520515411.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:31.599Z,1520515411.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:31.999Z,1520515411.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:32.397Z,1520515412.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:32.798Z,1520515412.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:33.200Z,1520515413.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:33.597Z,1520515413.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:34.005Z,1520515414.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:34.402Z,1520515414.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:34.797Z,1520515414.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:35.197Z,1520515415.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:35.599Z,1520515415.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:36.000Z,1520515416.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:36.395Z,1520515416.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:36.798Z,1520515416.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:37.202Z,1520515417.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:37.599Z,1520515417.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:38.000Z,1520515418.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:38.406Z,1520515418.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:38.799Z,1520515418.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:39.201Z,1520515419.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:39.602Z,1520515419.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:39.979Z,1520515419.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:40.411Z,1520515420.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:40.813Z,1520515420.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:41.215Z,1520515421.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:41.608Z,1520515421.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:41.995Z,1520515421.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:42.400Z,1520515422.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:42.809Z,1520515422.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:43.197Z,1520515423.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:43.593Z,1520515423.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:43.998Z,1520515423.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:44.403Z,1520515424.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:44.797Z,1520515424.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:45.208Z,1520515425.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:45.607Z,1520515425.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:46.008Z,1520515426.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:46.405Z,1520515426.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:46.803Z,1520515426.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:47.201Z,1520515427.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:47.598Z,1520515427.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:48.001Z,1520515428.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:48.402Z,1520515428.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:48.798Z,1520515428.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:49.201Z,1520515429.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:49.601Z,1520515429.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:50.005Z,1520515430.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:50.407Z,1520515430.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:50.805Z,1520515430.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:51.243Z,1520515431.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:51.607Z,1520515431.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:51.990Z,1520515431.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:52.391Z,1520515432.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:52.816Z,1520515432.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:53.220Z,1520515433.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:53.627Z,1520515433.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:53.999Z,1520515433.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:54.397Z,1520515434.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:54.802Z,1520515434.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:55.192Z,1520515435.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:55.594Z,1520515435.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:56.010Z,1520515436.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:56.395Z,1520515436.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:56.799Z,1520515436.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:57.196Z,1520515437.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:57.558Z,1520515437.558 [NAL9602](INFO): Powering up NAL9602
2018-03-08T13:23:57.604Z,1520515437.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:57.998Z,1520515437.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:58.399Z,1520515438.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:58.807Z,1520515438.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:59.199Z,1520515439.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:23:59.601Z,1520515439.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:00.004Z,1520515440.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:00.397Z,1520515440.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:00.805Z,1520515440.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:01.181Z,1520515441.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:01.586Z,1520515441.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:02.014Z,1520515442.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:02.386Z,1520515442.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:02.792Z,1520515442.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:03.213Z,1520515443.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:03.634Z,1520515443.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:03.995Z,1520515443.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:04.397Z,1520515444.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:07.774Z,1520515447.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:07.922Z,1520515447.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:08.215Z,1520515448.215 [NAL9602](INFO): NAL9602 initialized
2018-03-08T13:24:08.247Z,1520515448.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:08.665Z,1520515448.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:09.067Z,1520515449.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:09.466Z,1520515449.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:09.857Z,1520515449.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:10.238Z,1520515450.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:10.655Z,1520515450.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:11.055Z,1520515451.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:11.459Z,1520515451.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:11.864Z,1520515451.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:12.265Z,1520515452.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:12.642Z,1520515452.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:13.055Z,1520515453.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:13.463Z,1520515453.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:13.840Z,1520515453.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:14.238Z,1520515454.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:14.655Z,1520515454.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:15.085Z,1520515455.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:15.477Z,1520515455.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:15.854Z,1520515455.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:16.244Z,1520515456.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:16.650Z,1520515456.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:17.054Z,1520515457.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:17.452Z,1520515457.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:17.878Z,1520515457.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:18.255Z,1520515458.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:18.644Z,1520515458.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:19.044Z,1520515459.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:19.445Z,1520515459.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:19.857Z,1520515459.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:20.256Z,1520515460.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:20.655Z,1520515460.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:21.058Z,1520515461.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:21.462Z,1520515461.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:21.855Z,1520515461.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:22.250Z,1520515462.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:22.654Z,1520515462.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:23.054Z,1520515463.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:23.462Z,1520515463.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:23.859Z,1520515463.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:24.266Z,1520515464.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:24.661Z,1520515464.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:25.060Z,1520515465.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:25.438Z,1520515465.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:25.836Z,1520515465.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:26.235Z,1520515466.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:26.661Z,1520515466.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:27.063Z,1520515467.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:27.463Z,1520515467.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:27.840Z,1520515467.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:28.239Z,1520515468.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:28.643Z,1520515468.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:29.042Z,1520515469.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:29.468Z,1520515469.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:29.864Z,1520515469.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:30.264Z,1520515470.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:30.639Z,1520515470.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:31.067Z,1520515471.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:31.438Z,1520515471.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:31.842Z,1520515471.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:32.246Z,1520515472.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:32.651Z,1520515472.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:33.070Z,1520515473.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:33.452Z,1520515473.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:33.842Z,1520515473.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:34.242Z,1520515474.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:34.643Z,1520515474.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:35.040Z,1520515475.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:35.456Z,1520515475.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:35.848Z,1520515475.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:36.247Z,1520515476.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:36.646Z,1520515476.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:37.043Z,1520515477.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:37.445Z,1520515477.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:37.846Z,1520515477.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:38.245Z,1520515478.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:38.648Z,1520515478.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:39.052Z,1520515479.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:39.449Z,1520515479.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:39.844Z,1520515479.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:40.305Z,1520515480.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:40.667Z,1520515480.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:41.067Z,1520515481.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:41.470Z,1520515481.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:41.860Z,1520515481.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:42.257Z,1520515482.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:42.654Z,1520515482.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:43.049Z,1520515483.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:43.433Z,1520515483.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:43.836Z,1520515483.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:44.260Z,1520515484.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:44.664Z,1520515484.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:45.065Z,1520515485.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:45.495Z,1520515485.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:45.841Z,1520515485.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:46.246Z,1520515486.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:46.675Z,1520515486.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:47.056Z,1520515487.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:47.457Z,1520515487.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:47.863Z,1520515487.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:48.259Z,1520515488.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:48.635Z,1520515488.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:49.040Z,1520515489.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:49.441Z,1520515489.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:49.844Z,1520515489.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:50.243Z,1520515490.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:50.667Z,1520515490.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:51.079Z,1520515491.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:51.478Z,1520515491.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:51.846Z,1520515491.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:52.243Z,1520515492.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:52.645Z,1520515492.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:53.043Z,1520515493.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:53.456Z,1520515493.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:53.854Z,1520515493.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:54.256Z,1520515494.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:54.655Z,1520515494.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:55.043Z,1520515495.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:55.518Z,1520515495.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:55.836Z,1520515495.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:56.250Z,1520515496.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:56.655Z,1520515496.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:57.054Z,1520515497.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:57.459Z,1520515497.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:57.851Z,1520515497.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:58.227Z,1520515498.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:58.653Z,1520515498.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:59.063Z,1520515499.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:59.460Z,1520515499.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:24:59.861Z,1520515499.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:00.270Z,1520515500.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:00.673Z,1520515500.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:01.071Z,1520515501.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:01.439Z,1520515501.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:01.844Z,1520515501.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:02.244Z,1520515502.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:02.665Z,1520515502.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:03.039Z,1520515503.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:03.466Z,1520515503.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:03.841Z,1520515503.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:04.261Z,1520515504.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:04.675Z,1520515504.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:08.585Z,1520515508.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:08.735Z,1520515508.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:09.064Z,1520515509.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:09.461Z,1520515509.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:09.855Z,1520515509.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:10.257Z,1520515510.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:10.659Z,1520515510.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:11.051Z,1520515511.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:11.462Z,1520515511.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:11.864Z,1520515511.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:12.261Z,1520515512.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:12.653Z,1520515512.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:13.057Z,1520515513.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:13.451Z,1520515513.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:13.855Z,1520515513.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:14.314Z,1520515514.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:14.696Z,1520515514.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:15.074Z,1520515515.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:15.472Z,1520515515.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:15.849Z,1520515515.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:16.275Z,1520515516.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:16.671Z,1520515516.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:17.039Z,1520515517.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:17.472Z,1520515517.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:17.878Z,1520515517.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:18.274Z,1520515518.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:18.666Z,1520515518.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:19.050Z,1520515519.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:19.454Z,1520515519.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:19.852Z,1520515519.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:20.254Z,1520515520.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:20.691Z,1520515520.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:21.092Z,1520515521.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:21.476Z,1520515521.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:21.868Z,1520515521.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:22.271Z,1520515522.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:22.672Z,1520515522.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:23.074Z,1520515523.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:23.479Z,1520515523.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:23.878Z,1520515523.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:24.276Z,1520515524.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:24.654Z,1520515524.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:25.052Z,1520515525.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:25.455Z,1520515525.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:25.855Z,1520515525.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:26.257Z,1520515526.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:26.674Z,1520515526.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:27.076Z,1520515527.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:27.484Z,1520515527.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:27.849Z,1520515527.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:28.256Z,1520515528.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:28.657Z,1520515528.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:29.055Z,1520515529.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:29.460Z,1520515529.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:29.884Z,1520515529.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:30.268Z,1520515530.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:30.656Z,1520515530.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:31.056Z,1520515531.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:31.456Z,1520515531.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:31.857Z,1520515531.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:32.257Z,1520515532.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:32.668Z,1520515532.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:33.095Z,1520515533.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:33.461Z,1520515533.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:33.855Z,1520515533.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:34.255Z,1520515534.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:34.659Z,1520515534.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:35.055Z,1520515535.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:35.463Z,1520515535.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:35.865Z,1520515535.865 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:35.865Z,1520515535.865 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 114
2018-03-08T13:25:35.865Z,1520515535.865 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T13:25:35.867Z,1520515535.867 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:35.867Z,1520515535.867 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 114
2018-03-08T13:25:35.867Z,1520515535.867 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T13:25:35.869Z,1520515535.869 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:35.869Z,1520515535.869 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 114
2018-03-08T13:25:35.869Z,1520515535.869 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T13:25:35.905Z,1520515535.905 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T13:25:35.905Z,1520515535.905 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T13:25:35.906Z,1520515535.906 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T13:25:36.293Z,1520515536.293 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T13:25:36.293Z,1520515536.293 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 114
2018-03-08T13:25:36.293Z,1520515536.293 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T13:25:36.294Z,1520515536.294 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 114
2018-03-08T13:25:36.294Z,1520515536.294 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T13:25:36.294Z,1520515536.294 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 114
2018-03-08T13:25:36.657Z,1520515536.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T13:25:36.658Z,1520515536.658 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:25:36.658Z,1520515536.658 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:25:36.659Z,1520515536.659 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T13:25:36.659Z,1520515536.659 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:25:36.659Z,1520515536.659 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:25:36.660Z,1520515536.660 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T13:25:36.660Z,1520515536.660 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:25:36.660Z,1520515536.660 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:25:37.054Z,1520515537.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T13:25:37.055Z,1520515537.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:37.457Z,1520515537.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T13:25:37.458Z,1520515537.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:37.866Z,1520515537.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T13:25:37.867Z,1520515537.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:38.315Z,1520515538.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-03-08T13:25:38.315Z,1520515538.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:38.664Z,1520515538.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T13:25:38.665Z,1520515538.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:39.068Z,1520515539.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T13:25:39.069Z,1520515539.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:39.475Z,1520515539.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T13:25:39.476Z,1520515539.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:39.866Z,1520515539.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T13:25:39.867Z,1520515539.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:40.264Z,1520515540.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T13:25:40.265Z,1520515540.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:40.689Z,1520515540.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T13:25:40.690Z,1520515540.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:41.061Z,1520515541.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T13:25:41.062Z,1520515541.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:41.467Z,1520515541.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T13:25:41.467Z,1520515541.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:41.872Z,1520515541.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T13:25:41.874Z,1520515541.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:42.269Z,1520515542.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T13:25:42.270Z,1520515542.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:42.662Z,1520515542.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T13:25:42.663Z,1520515542.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:43.067Z,1520515543.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T13:25:43.068Z,1520515543.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:43.482Z,1520515543.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T13:25:43.483Z,1520515543.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:43.866Z,1520515543.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T13:25:43.867Z,1520515543.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:44.249Z,1520515544.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T13:25:44.250Z,1520515544.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:44.672Z,1520515544.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T13:25:44.673Z,1520515544.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:45.080Z,1520515545.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T13:25:45.085Z,1520515545.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:45.501Z,1520515545.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T13:25:45.502Z,1520515545.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:45.852Z,1520515545.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T13:25:45.853Z,1520515545.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:46.274Z,1520515546.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T13:25:46.275Z,1520515546.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:46.654Z,1520515546.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T13:25:46.654Z,1520515546.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:47.058Z,1520515547.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T13:25:47.059Z,1520515547.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:47.479Z,1520515547.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T13:25:47.480Z,1520515547.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:47.878Z,1520515547.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T13:25:47.879Z,1520515547.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:48.260Z,1520515548.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T13:25:48.277Z,1520515548.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:48.654Z,1520515548.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T13:25:48.655Z,1520515548.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:49.054Z,1520515549.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T13:25:49.055Z,1520515549.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:49.455Z,1520515549.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T13:25:49.456Z,1520515549.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:49.850Z,1520515549.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T13:25:49.851Z,1520515549.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:50.254Z,1520515550.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T13:25:50.255Z,1520515550.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:50.680Z,1520515550.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T13:25:50.681Z,1520515550.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:51.063Z,1520515551.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T13:25:51.077Z,1520515551.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:51.467Z,1520515551.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T13:25:51.493Z,1520515551.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:51.854Z,1520515551.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T13:25:51.855Z,1520515551.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:52.258Z,1520515552.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T13:25:52.259Z,1520515552.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:52.654Z,1520515552.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T13:25:52.655Z,1520515552.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:53.055Z,1520515553.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T13:25:53.055Z,1520515553.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:53.485Z,1520515553.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T13:25:53.486Z,1520515553.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:53.854Z,1520515553.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T13:25:53.855Z,1520515553.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:54.286Z,1520515554.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T13:25:54.287Z,1520515554.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:54.658Z,1520515554.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T13:25:54.659Z,1520515554.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:55.057Z,1520515555.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T13:25:55.058Z,1520515555.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:55.468Z,1520515555.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T13:25:55.489Z,1520515555.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:55.871Z,1520515555.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:56.258Z,1520515556.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:56.669Z,1520515556.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:57.102Z,1520515557.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:57.506Z,1520515557.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:57.855Z,1520515557.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:58.258Z,1520515558.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:58.655Z,1520515558.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:59.070Z,1520515559.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:59.494Z,1520515559.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:25:59.867Z,1520515559.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:00.275Z,1520515560.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:00.655Z,1520515560.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:01.054Z,1520515561.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:01.462Z,1520515561.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:01.869Z,1520515561.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:02.302Z,1520515562.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:02.667Z,1520515562.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:03.066Z,1520515563.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:03.463Z,1520515563.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:03.856Z,1520515563.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:04.255Z,1520515564.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:04.258Z,1520515564.258 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T13:21:03.0Z
2018-03-08T13:26:04.258Z,1520515564.258 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T13:26:04.258Z,1520515564.258 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T13:26:04.655Z,1520515564.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:08.867Z,1520515568.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:09.013Z,1520515569.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:09.974Z,1520515569.974 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0132.lzma
2018-03-08T13:26:10.025Z,1520515570.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:10.164Z,1520515570.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:10.522Z,1520515570.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:10.869Z,1520515570.869 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0132.lzma.bak
2018-03-08T13:26:10.869Z,1520515570.869 [DataOverHttps](INFO): SBD MOMSN=7986038
2018-03-08T13:26:11.004Z,1520515571.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:11.487Z,1520515571.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:11.735Z,1520515571.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:15.654Z,1520515575.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:15.845Z,1520515575.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:16.214Z,1520515576.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:16.608Z,1520515576.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:17.020Z,1520515577.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:17.423Z,1520515577.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:17.817Z,1520515577.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:21.947Z,1520515581.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:22.031Z,1520515582.031 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0133.lzma
2018-03-08T13:26:22.098Z,1520515582.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:22.419Z,1520515582.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:22.775Z,1520515582.775 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0133.lzma.bak
2018-03-08T13:26:22.775Z,1520515582.775 [DataOverHttps](INFO): SBD MOMSN=7986040
2018-03-08T13:26:22.843Z,1520515582.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:23.405Z,1520515583.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:23.407Z,1520515583.407 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T13:26:23.408Z,1520515583.408 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T13:26:23.408Z,1520515583.408 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T13:26:23.651Z,1520515583.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:27.554Z,1520515587.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:27.698Z,1520515587.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:28.046Z,1520515588.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:28.437Z,1520515588.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:28.835Z,1520515588.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:29.230Z,1520515589.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:29.640Z,1520515589.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:30.035Z,1520515590.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:30.436Z,1520515590.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:30.827Z,1520515590.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:31.235Z,1520515591.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:31.638Z,1520515591.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:32.031Z,1520515592.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:32.446Z,1520515592.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:32.850Z,1520515592.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:33.241Z,1520515593.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:33.634Z,1520515593.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:34.036Z,1520515594.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:34.439Z,1520515594.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:34.835Z,1520515594.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:35.235Z,1520515595.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:35.663Z,1520515595.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:36.049Z,1520515596.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:36.445Z,1520515596.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:36.840Z,1520515596.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:37.213Z,1520515597.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:37.642Z,1520515597.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:38.025Z,1520515598.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:38.448Z,1520515598.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:38.848Z,1520515598.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:39.295Z,1520515599.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:39.624Z,1520515599.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:40.046Z,1520515600.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:40.466Z,1520515600.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:40.823Z,1520515600.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:41.233Z,1520515601.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:41.667Z,1520515601.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:42.032Z,1520515602.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:42.432Z,1520515602.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:42.819Z,1520515602.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:43.211Z,1520515603.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:43.630Z,1520515603.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:44.023Z,1520515604.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:44.434Z,1520515604.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:44.832Z,1520515604.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:45.269Z,1520515605.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:45.666Z,1520515605.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:46.065Z,1520515606.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:46.458Z,1520515606.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:46.852Z,1520515606.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:47.247Z,1520515607.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:47.657Z,1520515607.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:48.029Z,1520515608.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:48.428Z,1520515608.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:48.835Z,1520515608.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:49.222Z,1520515609.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:49.635Z,1520515609.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:50.054Z,1520515610.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:50.437Z,1520515610.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:50.843Z,1520515610.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:51.245Z,1520515611.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:51.635Z,1520515611.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:52.105Z,1520515612.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:52.454Z,1520515612.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:52.819Z,1520515612.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:53.245Z,1520515613.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:53.650Z,1520515613.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:54.043Z,1520515614.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:54.462Z,1520515614.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:54.823Z,1520515614.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:55.223Z,1520515615.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:55.626Z,1520515615.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:56.050Z,1520515616.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:56.444Z,1520515616.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:56.845Z,1520515616.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:57.245Z,1520515617.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:57.662Z,1520515617.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:58.036Z,1520515618.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:58.432Z,1520515618.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:58.831Z,1520515618.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:59.247Z,1520515619.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:26:59.642Z,1520515619.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:00.043Z,1520515620.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:00.438Z,1520515620.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:00.840Z,1520515620.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:01.230Z,1520515621.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:01.643Z,1520515621.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:02.034Z,1520515622.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:02.459Z,1520515622.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:02.843Z,1520515622.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:03.247Z,1520515623.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:03.650Z,1520515623.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:04.046Z,1520515624.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:04.432Z,1520515624.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:04.827Z,1520515624.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:05.230Z,1520515625.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:05.636Z,1520515625.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:06.042Z,1520515626.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:06.437Z,1520515626.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:06.830Z,1520515626.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:07.238Z,1520515627.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:07.632Z,1520515627.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:08.030Z,1520515628.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:08.435Z,1520515628.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:08.835Z,1520515628.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:09.236Z,1520515629.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:09.631Z,1520515629.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:10.027Z,1520515630.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:10.423Z,1520515630.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:10.830Z,1520515630.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:11.226Z,1520515631.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:11.635Z,1520515631.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:12.069Z,1520515632.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:12.435Z,1520515632.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:12.864Z,1520515632.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:13.230Z,1520515633.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:13.626Z,1520515633.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:14.031Z,1520515634.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:14.435Z,1520515634.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:14.842Z,1520515634.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:15.240Z,1520515635.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:15.635Z,1520515635.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:16.027Z,1520515636.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:16.434Z,1520515636.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:16.831Z,1520515636.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:17.227Z,1520515637.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:17.639Z,1520515637.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:18.039Z,1520515638.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:18.445Z,1520515638.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:18.861Z,1520515638.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:19.219Z,1520515639.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:19.661Z,1520515639.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:20.026Z,1520515640.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:20.436Z,1520515640.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:20.838Z,1520515640.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:21.232Z,1520515641.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:21.635Z,1520515641.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:22.029Z,1520515642.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:22.426Z,1520515642.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:22.835Z,1520515642.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:23.244Z,1520515643.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:23.740Z,1520515643.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:24.043Z,1520515644.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:27.172Z,1520515647.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:27.291Z,1520515647.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:27.643Z,1520515647.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:28.052Z,1520515648.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:28.492Z,1520515648.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:28.862Z,1520515648.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:29.259Z,1520515649.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:29.640Z,1520515649.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:30.049Z,1520515650.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:30.451Z,1520515650.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:30.840Z,1520515650.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:31.462Z,1520515651.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:31.706Z,1520515651.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:32.062Z,1520515652.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:32.475Z,1520515652.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:32.878Z,1520515652.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:33.245Z,1520515653.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:33.660Z,1520515653.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:34.058Z,1520515654.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:34.474Z,1520515654.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:34.870Z,1520515654.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:35.262Z,1520515655.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:35.640Z,1520515655.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:36.046Z,1520515656.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:36.443Z,1520515656.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:36.844Z,1520515656.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:37.247Z,1520515657.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:37.648Z,1520515657.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:38.059Z,1520515658.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:38.463Z,1520515658.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:38.848Z,1520515658.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:39.247Z,1520515659.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:39.644Z,1520515659.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:40.049Z,1520515660.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:40.464Z,1520515660.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:40.894Z,1520515660.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:41.270Z,1520515661.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:41.655Z,1520515661.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:42.052Z,1520515662.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:42.451Z,1520515662.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:42.844Z,1520515662.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:43.251Z,1520515663.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:43.655Z,1520515663.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:44.070Z,1520515664.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:44.457Z,1520515664.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:44.846Z,1520515664.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:45.243Z,1520515665.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:45.674Z,1520515665.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:46.049Z,1520515666.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:46.457Z,1520515666.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:46.857Z,1520515666.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:47.306Z,1520515667.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:47.666Z,1520515667.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:48.068Z,1520515668.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:48.435Z,1520515668.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:48.869Z,1520515668.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:49.240Z,1520515669.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:49.671Z,1520515669.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:50.077Z,1520515670.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:50.450Z,1520515670.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:50.843Z,1520515670.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:51.241Z,1520515671.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:51.642Z,1520515671.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:52.046Z,1520515672.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:52.456Z,1520515672.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:52.892Z,1520515672.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:53.247Z,1520515673.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:53.645Z,1520515673.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:54.106Z,1520515674.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:54.441Z,1520515674.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:54.847Z,1520515674.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:55.292Z,1520515675.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:55.652Z,1520515675.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:56.050Z,1520515676.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:56.452Z,1520515676.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:56.854Z,1520515676.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:57.250Z,1520515677.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:57.646Z,1520515677.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:58.046Z,1520515678.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:58.484Z,1520515678.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:58.851Z,1520515678.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:59.258Z,1520515679.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:27:59.646Z,1520515679.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:00.042Z,1520515680.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:00.458Z,1520515680.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:00.850Z,1520515680.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:01.299Z,1520515681.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:01.665Z,1520515681.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:02.055Z,1520515682.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:02.497Z,1520515682.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:02.859Z,1520515682.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:03.258Z,1520515683.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:03.652Z,1520515683.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:04.054Z,1520515684.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:04.555Z,1520515684.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:04.874Z,1520515684.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:05.270Z,1520515685.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:05.639Z,1520515685.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:06.043Z,1520515686.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:06.453Z,1520515686.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:06.853Z,1520515686.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:07.241Z,1520515687.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:07.662Z,1520515687.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:08.086Z,1520515688.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:08.452Z,1520515688.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:08.848Z,1520515688.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:09.258Z,1520515689.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:09.646Z,1520515689.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:10.051Z,1520515690.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:10.457Z,1520515690.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:10.949Z,1520515690.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:11.267Z,1520515691.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:11.653Z,1520515691.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:12.057Z,1520515692.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:12.454Z,1520515692.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:12.899Z,1520515692.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:13.274Z,1520515693.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:13.658Z,1520515693.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:14.064Z,1520515694.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:14.455Z,1520515694.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:14.835Z,1520515694.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:15.262Z,1520515695.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:15.643Z,1520515695.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:16.041Z,1520515696.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:16.471Z,1520515696.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:16.848Z,1520515696.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:17.244Z,1520515697.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:17.645Z,1520515697.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:18.041Z,1520515698.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:18.440Z,1520515698.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:18.845Z,1520515698.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:19.243Z,1520515699.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:19.646Z,1520515699.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:20.070Z,1520515700.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:20.455Z,1520515700.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:20.841Z,1520515700.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:21.244Z,1520515701.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:21.643Z,1520515701.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:22.037Z,1520515702.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:22.490Z,1520515702.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:22.873Z,1520515702.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:23.249Z,1520515703.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:23.642Z,1520515703.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:24.106Z,1520515704.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:27.978Z,1520515707.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:28.096Z,1520515708.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:28.487Z,1520515708.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:28.856Z,1520515708.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:29.253Z,1520515709.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:29.649Z,1520515709.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:30.050Z,1520515710.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:30.449Z,1520515710.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:30.851Z,1520515710.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:31.306Z,1520515711.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:31.687Z,1520515711.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:32.087Z,1520515712.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:32.458Z,1520515712.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:32.851Z,1520515712.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:33.248Z,1520515713.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:33.650Z,1520515713.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:34.050Z,1520515714.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:34.457Z,1520515714.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:34.855Z,1520515714.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:35.261Z,1520515715.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:35.695Z,1520515715.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:36.059Z,1520515716.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:36.459Z,1520515716.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:36.886Z,1520515716.886 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:36.886Z,1520515716.886 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 115
2018-03-08T13:28:36.886Z,1520515716.886 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T13:28:36.888Z,1520515716.888 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:36.888Z,1520515716.888 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 115
2018-03-08T13:28:36.888Z,1520515716.888 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T13:28:36.894Z,1520515716.894 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:36.894Z,1520515716.894 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 115
2018-03-08T13:28:36.894Z,1520515716.894 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T13:28:36.918Z,1520515716.918 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T13:28:36.918Z,1520515716.918 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T13:28:36.918Z,1520515716.918 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T13:28:37.303Z,1520515717.303 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T13:28:37.303Z,1520515717.303 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 115
2018-03-08T13:28:37.304Z,1520515717.304 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T13:28:37.304Z,1520515717.304 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 115
2018-03-08T13:28:37.304Z,1520515717.304 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T13:28:37.304Z,1520515717.304 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 115
2018-03-08T13:28:37.671Z,1520515717.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T13:28:37.671Z,1520515717.671 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:28:37.671Z,1520515717.671 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:28:37.672Z,1520515717.672 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T13:28:37.672Z,1520515717.672 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:28:37.677Z,1520515717.677 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:28:37.678Z,1520515717.678 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T13:28:37.679Z,1520515717.679 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:28:37.679Z,1520515717.679 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:28:38.074Z,1520515718.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T13:28:38.076Z,1520515718.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:38.471Z,1520515718.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T13:28:38.471Z,1520515718.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:38.861Z,1520515718.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T13:28:38.862Z,1520515718.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:39.260Z,1520515719.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T13:28:39.261Z,1520515719.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:39.665Z,1520515719.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T13:28:39.666Z,1520515719.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:40.064Z,1520515720.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T13:28:40.066Z,1520515720.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:40.466Z,1520515720.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T13:28:40.467Z,1520515720.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:40.884Z,1520515720.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T13:28:40.886Z,1520515720.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:41.266Z,1520515721.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T13:28:41.267Z,1520515721.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:41.670Z,1520515721.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T13:28:41.671Z,1520515721.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:42.065Z,1520515722.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T13:28:42.066Z,1520515722.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:42.462Z,1520515722.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T13:28:42.463Z,1520515722.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:42.862Z,1520515722.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T13:28:42.863Z,1520515722.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:43.270Z,1520515723.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T13:28:43.271Z,1520515723.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:43.667Z,1520515723.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T13:28:43.668Z,1520515723.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:44.069Z,1520515724.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T13:28:44.070Z,1520515724.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:44.473Z,1520515724.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T13:28:44.475Z,1520515724.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:44.868Z,1520515724.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T13:28:44.869Z,1520515724.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:45.262Z,1520515725.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T13:28:45.263Z,1520515725.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:45.670Z,1520515725.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T13:28:45.671Z,1520515725.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:46.042Z,1520515726.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T13:28:46.043Z,1520515726.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:46.472Z,1520515726.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T13:28:46.473Z,1520515726.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:46.874Z,1520515726.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T13:28:46.875Z,1520515726.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:47.268Z,1520515727.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T13:28:47.269Z,1520515727.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:47.676Z,1520515727.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T13:28:47.681Z,1520515727.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:48.046Z,1520515728.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T13:28:48.047Z,1520515728.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:48.451Z,1520515728.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T13:28:48.452Z,1520515728.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:48.850Z,1520515728.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T13:28:48.851Z,1520515728.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:49.250Z,1520515729.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T13:28:49.251Z,1520515729.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:49.686Z,1520515729.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T13:28:49.687Z,1520515729.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:50.056Z,1520515730.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T13:28:50.057Z,1520515730.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:50.462Z,1520515730.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T13:28:50.463Z,1520515730.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:50.851Z,1520515730.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T13:28:50.852Z,1520515730.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:51.258Z,1520515731.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T13:28:51.259Z,1520515731.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:51.654Z,1520515731.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T13:28:51.655Z,1520515731.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:52.051Z,1520515732.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T13:28:52.052Z,1520515732.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:52.456Z,1520515732.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T13:28:52.457Z,1520515732.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:52.884Z,1520515732.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T13:28:52.885Z,1520515732.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:53.294Z,1520515733.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T13:28:53.296Z,1520515733.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:53.651Z,1520515733.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T13:28:53.652Z,1520515733.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:54.097Z,1520515734.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T13:28:54.098Z,1520515734.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:54.450Z,1520515734.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T13:28:54.451Z,1520515734.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:54.858Z,1520515734.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T13:28:54.859Z,1520515734.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:55.265Z,1520515735.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T13:28:55.266Z,1520515735.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:55.682Z,1520515735.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T13:28:55.683Z,1520515735.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:56.070Z,1520515736.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T13:28:56.071Z,1520515736.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:56.466Z,1520515736.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T13:28:56.467Z,1520515736.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:56.862Z,1520515736.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T13:28:56.863Z,1520515736.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:57.261Z,1520515737.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:57.671Z,1520515737.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:58.058Z,1520515738.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:58.463Z,1520515738.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:58.869Z,1520515738.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:59.268Z,1520515739.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:28:59.663Z,1520515739.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:00.072Z,1520515740.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:00.443Z,1520515740.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:00.847Z,1520515740.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:01.246Z,1520515741.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:01.660Z,1520515741.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:02.064Z,1520515742.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:02.456Z,1520515742.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:02.848Z,1520515742.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:03.254Z,1520515743.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:03.660Z,1520515743.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:04.048Z,1520515744.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:04.460Z,1520515744.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:04.865Z,1520515744.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:05.267Z,1520515745.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:05.654Z,1520515745.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:06.057Z,1520515746.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:06.457Z,1520515746.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:06.854Z,1520515746.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:07.254Z,1520515747.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:07.671Z,1520515747.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:08.071Z,1520515748.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:08.475Z,1520515748.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:08.872Z,1520515748.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:09.267Z,1520515749.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:09.664Z,1520515749.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:10.061Z,1520515750.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:10.478Z,1520515750.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:10.868Z,1520515750.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:11.261Z,1520515751.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:11.657Z,1520515751.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:12.118Z,1520515752.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:13.933Z,1520515753.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:14.070Z,1520515754.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:14.426Z,1520515754.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:14.823Z,1520515754.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:15.222Z,1520515755.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:15.619Z,1520515755.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:16.020Z,1520515756.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:16.400Z,1520515756.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:16.834Z,1520515756.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:17.226Z,1520515757.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:17.595Z,1520515757.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:18.005Z,1520515758.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:18.408Z,1520515758.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:18.811Z,1520515758.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:19.241Z,1520515759.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:19.602Z,1520515759.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:20.003Z,1520515760.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:20.408Z,1520515760.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:20.843Z,1520515760.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:21.204Z,1520515761.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:21.622Z,1520515761.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:22.026Z,1520515762.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:22.412Z,1520515762.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:22.818Z,1520515762.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:23.221Z,1520515763.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:23.602Z,1520515763.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:24.024Z,1520515764.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:24.423Z,1520515764.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:28.348Z,1520515768.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:28.482Z,1520515768.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:28.830Z,1520515768.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:29.232Z,1520515769.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:29.639Z,1520515769.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:30.034Z,1520515770.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:30.466Z,1520515770.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:30.865Z,1520515770.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:31.236Z,1520515771.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:31.638Z,1520515771.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:32.027Z,1520515772.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:32.431Z,1520515772.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:32.836Z,1520515772.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:33.265Z,1520515773.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:33.667Z,1520515773.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:34.040Z,1520515774.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:34.436Z,1520515774.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:34.829Z,1520515774.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:35.230Z,1520515775.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:35.632Z,1520515775.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:36.029Z,1520515776.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:36.465Z,1520515776.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:36.842Z,1520515776.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:37.239Z,1520515777.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:37.677Z,1520515777.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:38.031Z,1520515778.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:38.439Z,1520515778.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:38.849Z,1520515778.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:39.235Z,1520515779.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:39.642Z,1520515779.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:40.047Z,1520515780.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:40.445Z,1520515780.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:40.838Z,1520515780.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:41.239Z,1520515781.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:41.645Z,1520515781.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:42.046Z,1520515782.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:42.451Z,1520515782.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:42.861Z,1520515782.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:43.261Z,1520515783.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:43.628Z,1520515783.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:44.028Z,1520515784.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:44.432Z,1520515784.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:44.831Z,1520515784.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:45.265Z,1520515785.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:45.638Z,1520515785.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:46.051Z,1520515786.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:46.443Z,1520515786.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:46.839Z,1520515786.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:47.233Z,1520515787.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:47.637Z,1520515787.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:48.056Z,1520515788.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:48.444Z,1520515788.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:48.849Z,1520515788.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:49.248Z,1520515789.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:49.637Z,1520515789.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:50.037Z,1520515790.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:50.438Z,1520515790.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:50.843Z,1520515790.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:51.245Z,1520515791.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:51.652Z,1520515791.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:52.048Z,1520515792.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:52.455Z,1520515792.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:52.832Z,1520515792.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:53.230Z,1520515793.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:53.628Z,1520515793.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:54.034Z,1520515794.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:54.440Z,1520515794.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:54.861Z,1520515794.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:55.236Z,1520515795.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:55.633Z,1520515795.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:56.033Z,1520515796.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:56.431Z,1520515796.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:56.835Z,1520515796.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:57.232Z,1520515797.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:57.642Z,1520515797.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:58.039Z,1520515798.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:58.441Z,1520515798.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:58.830Z,1520515798.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:59.235Z,1520515799.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:29:59.635Z,1520515799.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:00.038Z,1520515800.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:00.482Z,1520515800.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:00.848Z,1520515800.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:01.240Z,1520515801.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:01.634Z,1520515801.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:02.042Z,1520515802.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:02.439Z,1520515802.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:02.855Z,1520515802.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:03.261Z,1520515803.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:03.643Z,1520515803.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:04.047Z,1520515804.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:04.455Z,1520515804.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:04.842Z,1520515804.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:05.225Z,1520515805.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:05.650Z,1520515805.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:06.035Z,1520515806.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:06.436Z,1520515806.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:06.836Z,1520515806.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:07.236Z,1520515807.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:07.630Z,1520515807.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:08.038Z,1520515808.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:08.431Z,1520515808.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:08.831Z,1520515808.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:09.232Z,1520515809.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:09.632Z,1520515809.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:10.036Z,1520515810.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:10.444Z,1520515810.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:10.829Z,1520515810.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:11.226Z,1520515811.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:11.629Z,1520515811.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:12.031Z,1520515812.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:12.432Z,1520515812.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:12.844Z,1520515812.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:13.236Z,1520515813.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:13.631Z,1520515813.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:14.031Z,1520515814.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:14.430Z,1520515814.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:14.835Z,1520515814.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:15.233Z,1520515815.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:15.635Z,1520515815.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:16.039Z,1520515816.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:16.442Z,1520515816.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:16.833Z,1520515816.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:17.238Z,1520515817.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:17.635Z,1520515817.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:18.034Z,1520515818.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:18.442Z,1520515818.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:18.838Z,1520515818.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:19.236Z,1520515819.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:19.634Z,1520515819.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:20.030Z,1520515820.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:20.432Z,1520515820.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:20.839Z,1520515820.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:21.239Z,1520515821.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:21.637Z,1520515821.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:22.037Z,1520515822.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:22.436Z,1520515822.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:22.835Z,1520515822.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:23.227Z,1520515823.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:23.634Z,1520515823.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:24.031Z,1520515824.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:24.438Z,1520515824.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:28.079Z,1520515828.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:28.286Z,1520515828.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:28.606Z,1520515828.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:29.006Z,1520515829.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:29.407Z,1520515829.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:29.804Z,1520515829.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:30.208Z,1520515830.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:30.612Z,1520515830.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:31.017Z,1520515831.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:31.415Z,1520515831.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:31.806Z,1520515831.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:32.218Z,1520515832.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:32.607Z,1520515832.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:33.011Z,1520515833.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:33.417Z,1520515833.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:33.823Z,1520515833.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:34.223Z,1520515834.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:34.617Z,1520515834.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:35.006Z,1520515835.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:35.427Z,1520515835.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:35.822Z,1520515835.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:36.218Z,1520515836.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:36.618Z,1520515836.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:37.011Z,1520515837.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:37.414Z,1520515837.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:37.819Z,1520515837.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:38.217Z,1520515838.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:38.615Z,1520515838.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:38.000Z,1520515839.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:39.429Z,1520515839.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:39.828Z,1520515839.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:40.231Z,1520515840.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:40.599Z,1520515840.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:40.999Z,1520515840.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:41.408Z,1520515841.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:41.834Z,1520515841.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:42.230Z,1520515842.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:42.602Z,1520515842.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:43.008Z,1520515843.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:43.408Z,1520515843.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:43.813Z,1520515843.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:44.208Z,1520515844.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:44.604Z,1520515844.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:45.002Z,1520515845.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:45.414Z,1520515845.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:45.807Z,1520515845.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:46.215Z,1520515846.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:46.648Z,1520515846.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:46.998Z,1520515846.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:47.415Z,1520515847.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:47.811Z,1520515847.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:48.207Z,1520515848.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:48.607Z,1520515848.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:49.008Z,1520515849.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:49.446Z,1520515849.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:49.818Z,1520515849.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:50.212Z,1520515850.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:50.704Z,1520515850.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:51.022Z,1520515851.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:51.466Z,1520515851.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:51.817Z,1520515851.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:52.219Z,1520515852.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:52.605Z,1520515852.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:53.014Z,1520515853.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:53.423Z,1520515853.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:53.821Z,1520515853.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:54.220Z,1520515854.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:54.608Z,1520515854.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:55.020Z,1520515855.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:55.418Z,1520515855.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:55.867Z,1520515855.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:56.227Z,1520515856.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:56.615Z,1520515856.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:57.029Z,1520515857.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:57.422Z,1520515857.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:57.823Z,1520515857.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:58.230Z,1520515858.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:58.622Z,1520515858.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:59.018Z,1520515859.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:59.420Z,1520515859.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:30:59.820Z,1520515859.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:00.227Z,1520515860.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:00.594Z,1520515860.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:01.073Z,1520515861.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:01.416Z,1520515861.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:01.835Z,1520515861.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:02.232Z,1520515862.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:02.627Z,1520515862.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:02.999Z,1520515862.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:03.412Z,1520515863.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:03.812Z,1520515863.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:04.205Z,1520515864.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:04.607Z,1520515864.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:05.005Z,1520515865.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:05.419Z,1520515865.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:05.824Z,1520515865.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:06.212Z,1520515866.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:06.615Z,1520515866.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:07.002Z,1520515867.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:07.419Z,1520515867.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:07.817Z,1520515867.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:08.216Z,1520515868.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:08.613Z,1520515868.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:09.013Z,1520515869.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:09.415Z,1520515869.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:09.829Z,1520515869.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:10.223Z,1520515870.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:10.650Z,1520515870.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:11.014Z,1520515871.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:11.418Z,1520515871.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:11.871Z,1520515871.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:12.236Z,1520515872.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:12.628Z,1520515872.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:13.011Z,1520515873.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:13.407Z,1520515873.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:13.834Z,1520515873.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:14.214Z,1520515874.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:14.605Z,1520515874.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:15.004Z,1520515875.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:15.440Z,1520515875.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:15.804Z,1520515875.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:16.236Z,1520515876.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:16.612Z,1520515876.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:17.003Z,1520515877.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:17.405Z,1520515877.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:17.815Z,1520515877.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:18.203Z,1520515878.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:18.604Z,1520515878.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:19.003Z,1520515879.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:19.410Z,1520515879.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:19.808Z,1520515879.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:20.235Z,1520515880.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:20.610Z,1520515880.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:21.003Z,1520515881.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:21.416Z,1520515881.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:21.804Z,1520515881.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:22.216Z,1520515882.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:22.607Z,1520515882.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:22.000Z,1520515883.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:23.407Z,1520515883.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:23.811Z,1520515883.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:23.813Z,1520515883.813 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T13:31:23.814Z,1520515883.814 [Default:CheckIn:C.Wait] Stopped
2018-03-08T13:31:23.814Z,1520515883.814 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T13:31:23.814Z,1520515883.814 [Default:CheckIn:D] Running Loop=1
2018-03-08T13:31:24.209Z,1520515884.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:24.212Z,1520515884.212 [Default:CheckIn:D] Stopped
2018-03-08T13:31:24.212Z,1520515884.212 [Default:CheckIn:E] Running Loop=1
2018-03-08T13:31:24.606Z,1520515884.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:24.610Z,1520515884.610 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 345.656771 min 
2018-03-08T13:31:24.610Z,1520515884.610 [Default:CheckIn:E] Stopped
2018-03-08T13:31:24.610Z,1520515884.610 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T13:31:24.610Z,1520515884.610 [Default:CheckIn] Stopped
2018-03-08T13:31:24.610Z,1520515884.610 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T13:31:24.611Z,1520515884.611 [Default:CheckIn](INFO): Running loop #34
2018-03-08T13:31:24.611Z,1520515884.611 [Default:CheckIn] Running Loop=34
2018-03-08T13:31:24.611Z,1520515884.611 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T13:31:24.611Z,1520515884.611 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T13:31:27.744Z,1520515887.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:27.940Z,1520515887.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:28.220Z,1520515888.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:28.621Z,1520515888.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:29.020Z,1520515889.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:29.431Z,1520515889.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:29.827Z,1520515889.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:30.218Z,1520515890.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:30.623Z,1520515890.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:31.024Z,1520515891.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:31.429Z,1520515891.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:31.822Z,1520515891.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:32.219Z,1520515892.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:32.619Z,1520515892.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:33.019Z,1520515893.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:33.428Z,1520515893.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:33.834Z,1520515893.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:34.234Z,1520515894.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:34.618Z,1520515894.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:35.022Z,1520515895.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:35.417Z,1520515895.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:35.816Z,1520515895.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:36.223Z,1520515896.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:36.634Z,1520515896.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:37.034Z,1520515897.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:37.431Z,1520515897.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:37.835Z,1520515897.835 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:37.836Z,1520515897.836 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 116
2018-03-08T13:31:37.836Z,1520515897.836 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T13:31:37.842Z,1520515897.842 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:37.842Z,1520515897.842 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 116
2018-03-08T13:31:37.842Z,1520515897.842 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T13:31:37.844Z,1520515897.844 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:37.844Z,1520515897.844 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 116
2018-03-08T13:31:37.844Z,1520515897.844 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T13:31:37.901Z,1520515897.901 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T13:31:37.901Z,1520515897.901 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T13:31:37.901Z,1520515897.901 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T13:31:38.237Z,1520515898.237 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T13:31:38.237Z,1520515898.237 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 116
2018-03-08T13:31:38.237Z,1520515898.237 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T13:31:38.237Z,1520515898.237 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 116
2018-03-08T13:31:38.238Z,1520515898.238 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T13:31:38.238Z,1520515898.238 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 116
2018-03-08T13:31:38.619Z,1520515898.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T13:31:38.620Z,1520515898.620 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:31:38.620Z,1520515898.620 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:31:38.620Z,1520515898.620 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T13:31:38.621Z,1520515898.621 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:31:38.621Z,1520515898.621 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:31:38.621Z,1520515898.621 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T13:31:38.622Z,1520515898.622 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:31:38.622Z,1520515898.622 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:31:39.025Z,1520515899.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T13:31:39.026Z,1520515899.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:39.429Z,1520515899.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T13:31:39.430Z,1520515899.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:39.833Z,1520515899.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T13:31:39.834Z,1520515899.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:40.272Z,1520515900.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T13:31:40.281Z,1520515900.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:40.627Z,1520515900.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T13:31:40.627Z,1520515900.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:41.022Z,1520515901.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T13:31:41.023Z,1520515901.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:41.420Z,1520515901.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T13:31:41.421Z,1520515901.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:41.832Z,1520515901.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T13:31:41.833Z,1520515901.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:42.245Z,1520515902.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T13:31:42.246Z,1520515902.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:42.619Z,1520515902.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T13:31:42.620Z,1520515902.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:43.018Z,1520515903.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T13:31:43.019Z,1520515903.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:43.433Z,1520515903.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T13:31:43.434Z,1520515903.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:43.834Z,1520515903.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T13:31:43.835Z,1520515903.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:44.230Z,1520515904.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T13:31:44.231Z,1520515904.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:44.630Z,1520515904.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T13:31:44.631Z,1520515904.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:45.026Z,1520515905.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T13:31:45.027Z,1520515905.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:45.409Z,1520515905.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T13:31:45.410Z,1520515905.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:45.833Z,1520515905.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T13:31:45.834Z,1520515905.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:46.233Z,1520515906.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T13:31:46.234Z,1520515906.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:46.637Z,1520515906.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T13:31:46.638Z,1520515906.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:47.028Z,1520515907.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T13:31:47.033Z,1520515907.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:47.450Z,1520515907.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T13:31:47.451Z,1520515907.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:47.843Z,1520515907.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T13:31:47.844Z,1520515907.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:48.215Z,1520515908.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T13:31:48.216Z,1520515908.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:48.245Z,1520515908.245 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T13:31:48.622Z,1520515908.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T13:31:48.623Z,1520515908.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:49.070Z,1520515909.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T13:31:49.071Z,1520515909.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:49.436Z,1520515909.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T13:31:49.457Z,1520515909.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:49.829Z,1520515909.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T13:31:49.830Z,1520515909.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:50.237Z,1520515910.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T13:31:50.238Z,1520515910.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:50.608Z,1520515910.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T13:31:50.609Z,1520515910.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:51.026Z,1520515911.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T13:31:51.027Z,1520515911.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:51.440Z,1520515911.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T13:31:51.441Z,1520515911.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:51.819Z,1520515911.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T13:31:51.822Z,1520515911.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:52.223Z,1520515912.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T13:31:52.224Z,1520515912.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:52.632Z,1520515912.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T13:31:52.633Z,1520515912.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:53.038Z,1520515913.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T13:31:53.039Z,1520515913.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:53.436Z,1520515913.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T13:31:53.437Z,1520515913.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:53.830Z,1520515913.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T13:31:53.831Z,1520515913.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:54.208Z,1520515914.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T13:31:54.221Z,1520515914.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:54.610Z,1520515914.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T13:31:54.611Z,1520515914.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:55.013Z,1520515915.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T13:31:55.014Z,1520515915.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:55.412Z,1520515915.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T13:31:55.413Z,1520515915.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:55.838Z,1520515915.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T13:31:55.839Z,1520515915.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:56.250Z,1520515916.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T13:31:56.251Z,1520515916.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:56.607Z,1520515916.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T13:31:56.607Z,1520515916.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:57.018Z,1520515917.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T13:31:57.018Z,1520515917.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:57.410Z,1520515917.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T13:31:57.411Z,1520515917.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:57.814Z,1520515917.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T13:31:57.815Z,1520515917.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:58.215Z,1520515918.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:58.623Z,1520515918.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:59.043Z,1520515919.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:59.428Z,1520515919.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:31:59.816Z,1520515919.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:00.217Z,1520515920.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:00.615Z,1520515920.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:01.011Z,1520515921.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:01.415Z,1520515921.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:01.828Z,1520515921.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:02.227Z,1520515922.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:02.609Z,1520515922.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:03.018Z,1520515923.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:03.417Z,1520515923.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:03.818Z,1520515923.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:04.217Z,1520515924.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:04.620Z,1520515924.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:05.024Z,1520515925.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:05.420Z,1520515925.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:05.814Z,1520515925.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:06.211Z,1520515926.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:06.615Z,1520515926.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:07.018Z,1520515927.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:07.419Z,1520515927.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:07.824Z,1520515927.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:08.226Z,1520515928.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:08.612Z,1520515928.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:09.031Z,1520515929.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:09.460Z,1520515929.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:09.813Z,1520515929.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:10.214Z,1520515930.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:10.631Z,1520515930.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:11.043Z,1520515931.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:11.435Z,1520515931.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:11.829Z,1520515931.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:12.208Z,1520515932.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:12.630Z,1520515932.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:13.038Z,1520515933.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:13.429Z,1520515933.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:13.835Z,1520515933.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:14.234Z,1520515934.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:14.611Z,1520515934.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:15.015Z,1520515935.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:15.416Z,1520515935.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:15.811Z,1520515935.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:16.215Z,1520515936.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:16.641Z,1520515936.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:17.016Z,1520515937.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:17.440Z,1520515937.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:17.815Z,1520515937.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:18.210Z,1520515938.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:18.615Z,1520515938.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:19.025Z,1520515939.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:19.419Z,1520515939.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:19.820Z,1520515939.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:20.226Z,1520515940.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:20.611Z,1520515940.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:21.015Z,1520515941.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:21.419Z,1520515941.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:21.817Z,1520515941.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:22.222Z,1520515942.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:22.625Z,1520515942.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:23.027Z,1520515943.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:23.419Z,1520515943.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:23.819Z,1520515943.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:24.223Z,1520515944.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:24.616Z,1520515944.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:27.926Z,1520515947.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:28.062Z,1520515948.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:28.471Z,1520515948.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:28.870Z,1520515948.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:29.239Z,1520515949.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:29.638Z,1520515949.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:30.029Z,1520515950.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:30.431Z,1520515950.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:30.841Z,1520515950.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:31.261Z,1520515951.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:31.622Z,1520515951.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:32.064Z,1520515952.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:32.446Z,1520515952.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:32.838Z,1520515952.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:33.244Z,1520515953.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:33.649Z,1520515953.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:34.044Z,1520515954.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:34.443Z,1520515954.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:34.839Z,1520515954.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:35.211Z,1520515955.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:35.619Z,1520515955.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:36.019Z,1520515956.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:36.444Z,1520515956.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:36.846Z,1520515956.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:37.241Z,1520515957.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:37.619Z,1520515957.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:38.023Z,1520515958.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:38.443Z,1520515958.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:38.841Z,1520515958.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:39.258Z,1520515959.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:39.666Z,1520515959.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:40.047Z,1520515960.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:40.445Z,1520515960.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:40.846Z,1520515960.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:41.227Z,1520515961.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:41.623Z,1520515961.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:42.055Z,1520515962.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:42.429Z,1520515962.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:42.847Z,1520515962.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:43.249Z,1520515963.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:43.630Z,1520515963.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:44.033Z,1520515964.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:44.450Z,1520515964.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:44.839Z,1520515964.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:45.242Z,1520515965.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:45.658Z,1520515965.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:46.049Z,1520515966.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:46.454Z,1520515966.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:46.825Z,1520515966.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:47.254Z,1520515967.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:47.647Z,1520515967.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:48.026Z,1520515968.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:48.468Z,1520515968.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:48.875Z,1520515968.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:49.286Z,1520515969.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:49.635Z,1520515969.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:50.034Z,1520515970.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:50.441Z,1520515970.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:50.823Z,1520515970.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:51.236Z,1520515971.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:51.653Z,1520515971.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:52.055Z,1520515972.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:52.454Z,1520515972.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:52.887Z,1520515972.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:53.224Z,1520515973.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:53.628Z,1520515973.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:54.023Z,1520515974.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:54.481Z,1520515974.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:54.867Z,1520515974.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:55.239Z,1520515975.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:55.639Z,1520515975.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:56.025Z,1520515976.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:56.426Z,1520515976.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:56.831Z,1520515976.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:57.242Z,1520515977.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:57.640Z,1520515977.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:58.040Z,1520515978.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:58.445Z,1520515978.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:58.833Z,1520515978.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:59.256Z,1520515979.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:32:59.646Z,1520515979.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:00.035Z,1520515980.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:00.444Z,1520515980.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:00.844Z,1520515980.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:01.249Z,1520515981.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:01.623Z,1520515981.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:02.019Z,1520515982.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:02.418Z,1520515982.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:02.846Z,1520515982.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:03.230Z,1520515983.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:03.657Z,1520515983.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:04.057Z,1520515984.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:04.455Z,1520515984.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:04.875Z,1520515984.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:05.230Z,1520515985.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:05.626Z,1520515985.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:06.030Z,1520515986.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:06.436Z,1520515986.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:06.832Z,1520515986.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:07.234Z,1520515987.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:07.643Z,1520515987.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:08.026Z,1520515988.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:08.506Z,1520515988.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:08.820Z,1520515988.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:09.220Z,1520515989.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:09.631Z,1520515989.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:10.032Z,1520515990.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:10.428Z,1520515990.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:10.819Z,1520515990.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:11.255Z,1520515991.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:11.626Z,1520515991.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:12.036Z,1520515992.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:12.438Z,1520515992.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:12.840Z,1520515992.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:13.247Z,1520515993.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:13.646Z,1520515993.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:14.039Z,1520515994.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:14.476Z,1520515994.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:14.839Z,1520515994.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:15.244Z,1520515995.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:15.642Z,1520515995.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:16.047Z,1520515996.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:16.442Z,1520515996.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:16.839Z,1520515996.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:17.239Z,1520515997.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:17.716Z,1520515997.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:18.019Z,1520515998.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:18.440Z,1520515998.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:18.840Z,1520515998.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:19.242Z,1520515999.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:19.639Z,1520515999.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:20.049Z,1520516000.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:20.434Z,1520516000.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:20.864Z,1520516000.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:21.247Z,1520516001.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:21.647Z,1520516001.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:22.068Z,1520516002.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:22.454Z,1520516002.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:22.857Z,1520516002.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:23.223Z,1520516003.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:23.623Z,1520516003.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:24.024Z,1520516004.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:24.450Z,1520516004.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:24.850Z,1520516004.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:28.060Z,1520516008.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:28.223Z,1520516008.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:28.573Z,1520516008.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:28.974Z,1520516008.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:29.388Z,1520516009.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:29.787Z,1520516009.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:30.223Z,1520516010.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:30.602Z,1520516010.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:30.982Z,1520516010.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:31.390Z,1520516011.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:31.790Z,1520516011.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:32.190Z,1520516012.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:32.578Z,1520516012.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:32.977Z,1520516012.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:33.381Z,1520516013.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:33.781Z,1520516013.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:34.189Z,1520516014.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:34.581Z,1520516014.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:34.979Z,1520516014.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:35.394Z,1520516015.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:35.794Z,1520516015.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:36.190Z,1520516016.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:36.577Z,1520516016.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:36.979Z,1520516016.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:37.394Z,1520516017.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:37.789Z,1520516017.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:38.183Z,1520516018.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:38.582Z,1520516018.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:38.978Z,1520516018.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:39.381Z,1520516019.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:39.785Z,1520516019.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:40.189Z,1520516020.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:40.577Z,1520516020.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:40.979Z,1520516020.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:41.395Z,1520516021.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:41.790Z,1520516021.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:42.187Z,1520516022.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:42.575Z,1520516022.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:42.982Z,1520516022.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:43.394Z,1520516023.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:43.786Z,1520516023.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:44.187Z,1520516024.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:44.586Z,1520516024.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:44.979Z,1520516024.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:45.384Z,1520516025.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:45.787Z,1520516025.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:46.185Z,1520516026.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:46.577Z,1520516026.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:46.981Z,1520516026.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:47.386Z,1520516027.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:47.785Z,1520516027.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:48.201Z,1520516028.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:48.579Z,1520516028.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:48.981Z,1520516028.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:49.386Z,1520516029.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:49.778Z,1520516029.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:50.183Z,1520516030.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:50.583Z,1520516030.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:50.983Z,1520516030.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:51.380Z,1520516031.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:51.793Z,1520516031.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:52.182Z,1520516032.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:52.582Z,1520516032.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:52.980Z,1520516032.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:53.399Z,1520516033.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:53.785Z,1520516033.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:54.193Z,1520516034.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:54.577Z,1520516034.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:54.978Z,1520516034.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:55.399Z,1520516035.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:55.783Z,1520516035.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:56.187Z,1520516036.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:56.582Z,1520516036.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:56.963Z,1520516036.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:57.398Z,1520516037.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:57.790Z,1520516037.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:58.194Z,1520516038.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:58.567Z,1520516038.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:58.963Z,1520516038.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:59.372Z,1520516039.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:33:59.796Z,1520516039.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:00.199Z,1520516040.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:00.564Z,1520516040.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:00.968Z,1520516040.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:01.398Z,1520516041.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:01.772Z,1520516041.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:02.197Z,1520516042.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:02.567Z,1520516042.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:02.964Z,1520516042.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:03.393Z,1520516043.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:03.798Z,1520516043.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:04.176Z,1520516044.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:04.573Z,1520516044.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:04.971Z,1520516044.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:05.369Z,1520516045.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:05.799Z,1520516045.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:06.200Z,1520516046.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:06.569Z,1520516046.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:06.974Z,1520516046.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:07.396Z,1520516047.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:07.795Z,1520516047.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:08.193Z,1520516048.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:08.572Z,1520516048.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:08.985Z,1520516048.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:09.342Z,1520516049.342 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T13:34:09.342Z,1520516049.342 [NAL9602] Data Fault, FailCount= 3
2018-03-08T13:34:09.342Z,1520516049.342 [NAL9602](ERROR): Data Fault
2018-03-08T13:34:09.405Z,1520516049.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:09.430Z,1520516049.430 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T13:34:09.734Z,1520516049.734 [NAL9602](INFO): Powering down
2018-03-08T13:34:09.832Z,1520516049.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:10.167Z,1520516050.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:10.598Z,1520516050.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:10.639Z,1520516050.639 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T13:34:10.639Z,1520516050.639 [NAL9602] No Fault, FailCount= 3
2018-03-08T13:34:11.002Z,1520516051.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:11.359Z,1520516051.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:11.766Z,1520516051.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:12.166Z,1520516052.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:12.564Z,1520516052.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:12.990Z,1520516052.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:13.365Z,1520516053.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:13.763Z,1520516053.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:14.167Z,1520516054.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:14.571Z,1520516054.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:14.968Z,1520516054.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:15.373Z,1520516055.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:15.771Z,1520516055.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:16.165Z,1520516056.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:16.572Z,1520516056.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:16.968Z,1520516056.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:17.369Z,1520516057.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:17.773Z,1520516057.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:18.168Z,1520516058.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:18.565Z,1520516058.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:18.971Z,1520516058.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:19.373Z,1520516059.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:19.766Z,1520516059.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:20.170Z,1520516060.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:20.569Z,1520516060.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:20.974Z,1520516060.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:21.371Z,1520516061.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:21.773Z,1520516061.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:22.166Z,1520516062.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:22.571Z,1520516062.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:22.973Z,1520516062.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:23.371Z,1520516063.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:23.774Z,1520516063.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:24.174Z,1520516064.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:24.570Z,1520516064.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:24.973Z,1520516064.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:28.721Z,1520516068.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:28.882Z,1520516068.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:29.202Z,1520516069.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:29.582Z,1520516069.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:29.995Z,1520516069.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:30.392Z,1520516070.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:30.789Z,1520516070.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:31.203Z,1520516071.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:31.613Z,1520516071.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:32.012Z,1520516072.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:32.403Z,1520516072.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:32.794Z,1520516072.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:33.192Z,1520516073.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:33.594Z,1520516073.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:33.994Z,1520516073.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:34.393Z,1520516074.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:34.794Z,1520516074.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:35.199Z,1520516075.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:35.591Z,1520516075.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:36.007Z,1520516076.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:36.398Z,1520516076.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:36.802Z,1520516076.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:37.235Z,1520516077.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:37.596Z,1520516077.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:37.993Z,1520516077.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:38.393Z,1520516078.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:38.799Z,1520516078.799 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:38.799Z,1520516078.799 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 117
2018-03-08T13:34:38.799Z,1520516078.799 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T13:34:38.805Z,1520516078.805 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:38.806Z,1520516078.806 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 117
2018-03-08T13:34:38.806Z,1520516078.806 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T13:34:38.807Z,1520516078.807 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:38.807Z,1520516078.807 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 117
2018-03-08T13:34:38.807Z,1520516078.807 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T13:34:38.828Z,1520516078.828 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T13:34:38.828Z,1520516078.828 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T13:34:38.828Z,1520516078.828 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T13:34:39.244Z,1520516079.244 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T13:34:39.244Z,1520516079.244 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 117
2018-03-08T13:34:39.245Z,1520516079.245 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T13:34:39.245Z,1520516079.245 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 117
2018-03-08T13:34:39.245Z,1520516079.245 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T13:34:39.245Z,1520516079.245 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 117
2018-03-08T13:34:39.592Z,1520516079.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T13:34:39.593Z,1520516079.593 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:34:39.593Z,1520516079.593 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:34:39.594Z,1520516079.594 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T13:34:39.594Z,1520516079.594 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:34:39.594Z,1520516079.594 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:34:39.595Z,1520516079.595 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T13:34:39.595Z,1520516079.595 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:34:39.595Z,1520516079.595 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:34:39.966Z,1520516079.966 [NAL9602](INFO): Powering up NAL9602
2018-03-08T13:34:40.011Z,1520516080.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T13:34:40.012Z,1520516080.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:40.402Z,1520516080.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T13:34:40.403Z,1520516080.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:40.802Z,1520516080.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T13:34:40.803Z,1520516080.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:41.198Z,1520516081.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T13:34:41.199Z,1520516081.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:41.606Z,1520516081.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T13:34:41.607Z,1520516081.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:41.996Z,1520516081.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T13:34:41.997Z,1520516081.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:42.403Z,1520516082.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T13:34:42.404Z,1520516082.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:42.798Z,1520516082.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T13:34:42.799Z,1520516082.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:43.214Z,1520516083.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T13:34:43.215Z,1520516083.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:43.607Z,1520516083.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T13:34:43.609Z,1520516083.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:44.022Z,1520516084.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T13:34:44.023Z,1520516084.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:44.388Z,1520516084.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T13:34:44.401Z,1520516084.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:44.810Z,1520516084.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T13:34:44.811Z,1520516084.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:45.202Z,1520516085.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T13:34:45.203Z,1520516085.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:45.599Z,1520516085.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T13:34:45.600Z,1520516085.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:45.991Z,1520516085.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T13:34:45.992Z,1520516085.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:46.397Z,1520516086.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T13:34:46.398Z,1520516086.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:46.788Z,1520516086.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T13:34:46.789Z,1520516086.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:47.197Z,1520516087.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T13:34:47.198Z,1520516087.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:47.592Z,1520516087.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T13:34:47.593Z,1520516087.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:47.993Z,1520516087.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T13:34:47.994Z,1520516087.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:48.389Z,1520516088.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T13:34:48.390Z,1520516088.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:48.789Z,1520516088.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T13:34:48.790Z,1520516088.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:49.200Z,1520516089.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T13:34:49.205Z,1520516089.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:49.601Z,1520516089.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T13:34:49.602Z,1520516089.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:50.037Z,1520516090.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T13:34:50.038Z,1520516090.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:50.394Z,1520516090.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T13:34:50.395Z,1520516090.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:50.835Z,1520516090.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T13:34:50.836Z,1520516090.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:51.150Z,1520516091.150 [NAL9602](INFO): NAL9602 initialized
2018-03-08T13:34:51.230Z,1520516091.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T13:34:51.231Z,1520516091.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:51.590Z,1520516091.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T13:34:51.591Z,1520516091.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:52.008Z,1520516092.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T13:34:52.009Z,1520516092.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:52.414Z,1520516092.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T13:34:52.415Z,1520516092.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:52.812Z,1520516092.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T13:34:52.813Z,1520516092.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:53.192Z,1520516093.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T13:34:53.193Z,1520516093.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:53.594Z,1520516093.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T13:34:53.595Z,1520516093.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:53.993Z,1520516093.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T13:34:53.994Z,1520516093.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:54.397Z,1520516094.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T13:34:54.398Z,1520516094.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:54.801Z,1520516094.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T13:34:54.802Z,1520516094.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:55.200Z,1520516095.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T13:34:55.201Z,1520516095.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:55.604Z,1520516095.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T13:34:55.605Z,1520516095.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:55.000Z,1520516096.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T13:34:56.001Z,1520516096.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:56.409Z,1520516096.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T13:34:56.410Z,1520516096.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:56.816Z,1520516096.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T13:34:56.821Z,1520516096.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:57.220Z,1520516097.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T13:34:57.221Z,1520516097.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:57.604Z,1520516097.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T13:34:57.605Z,1520516097.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:58.002Z,1520516098.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T13:34:58.003Z,1520516098.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:58.402Z,1520516098.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T13:34:58.403Z,1520516098.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:58.807Z,1520516098.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:59.210Z,1520516099.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:59.605Z,1520516099.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:34:59.995Z,1520516099.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:00.383Z,1520516100.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:00.815Z,1520516100.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:01.205Z,1520516101.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:01.611Z,1520516101.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:01.987Z,1520516101.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:02.388Z,1520516102.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:02.816Z,1520516102.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:03.217Z,1520516103.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:03.611Z,1520516103.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:03.991Z,1520516103.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:04.393Z,1520516104.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:04.807Z,1520516104.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:05.228Z,1520516105.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:05.602Z,1520516105.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:05.993Z,1520516105.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:06.394Z,1520516106.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:06.797Z,1520516106.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:07.196Z,1520516107.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:07.631Z,1520516107.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:07.991Z,1520516107.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:08.395Z,1520516108.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:08.811Z,1520516108.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:09.207Z,1520516109.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:09.596Z,1520516109.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:09.998Z,1520516109.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:10.395Z,1520516110.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:10.800Z,1520516110.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:11.208Z,1520516111.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:11.611Z,1520516111.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:11.994Z,1520516111.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:12.393Z,1520516112.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:12.801Z,1520516112.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:13.205Z,1520516113.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:13.605Z,1520516113.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:14.007Z,1520516114.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:14.396Z,1520516114.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:14.807Z,1520516114.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:15.218Z,1520516115.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:15.602Z,1520516115.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:15.983Z,1520516115.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:16.388Z,1520516116.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:16.808Z,1520516116.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:17.215Z,1520516117.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:17.616Z,1520516117.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:17.984Z,1520516117.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:18.387Z,1520516118.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:18.814Z,1520516118.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:19.216Z,1520516119.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:19.620Z,1520516119.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:19.997Z,1520516119.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:20.391Z,1520516120.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:20.825Z,1520516120.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:21.229Z,1520516121.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:21.595Z,1520516121.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:21.995Z,1520516121.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:22.427Z,1520516122.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:22.796Z,1520516122.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:23.199Z,1520516123.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:23.597Z,1520516123.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:23.994Z,1520516123.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:24.393Z,1520516124.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:24.796Z,1520516124.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:25.195Z,1520516125.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:29.131Z,1520516129.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:29.269Z,1520516129.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:29.606Z,1520516129.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:30.003Z,1520516130.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:30.403Z,1520516130.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:30.846Z,1520516130.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:31.214Z,1520516131.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:31.613Z,1520516131.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:32.010Z,1520516132.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:32.416Z,1520516132.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:32.819Z,1520516132.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:33.229Z,1520516133.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:33.627Z,1520516133.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:34.006Z,1520516134.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:34.409Z,1520516134.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:34.817Z,1520516134.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:35.213Z,1520516135.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:35.617Z,1520516135.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:36.010Z,1520516136.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:36.408Z,1520516136.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:36.823Z,1520516136.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:37.224Z,1520516137.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:37.658Z,1520516137.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:38.013Z,1520516138.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:38.415Z,1520516138.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:38.817Z,1520516138.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:39.219Z,1520516139.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:39.622Z,1520516139.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:40.013Z,1520516140.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:40.413Z,1520516140.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:40.818Z,1520516140.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:41.211Z,1520516141.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:41.621Z,1520516141.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:42.015Z,1520516142.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:42.413Z,1520516142.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:42.824Z,1520516142.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:43.239Z,1520516143.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:43.634Z,1520516143.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:44.008Z,1520516144.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:44.403Z,1520516144.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:44.804Z,1520516144.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:45.216Z,1520516145.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:45.608Z,1520516145.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:46.007Z,1520516146.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:46.402Z,1520516146.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:46.820Z,1520516146.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:47.208Z,1520516147.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:47.609Z,1520516147.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:48.003Z,1520516148.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:48.405Z,1520516148.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:48.815Z,1520516148.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:49.212Z,1520516149.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:49.612Z,1520516149.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:50.002Z,1520516150.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:50.406Z,1520516150.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:50.814Z,1520516150.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:51.226Z,1520516151.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:51.622Z,1520516151.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:52.010Z,1520516152.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:52.418Z,1520516152.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:52.818Z,1520516152.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:53.227Z,1520516153.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:53.621Z,1520516153.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:53.995Z,1520516153.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:54.428Z,1520516154.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:54.819Z,1520516154.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:55.266Z,1520516155.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:55.620Z,1520516155.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:56.003Z,1520516156.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:56.431Z,1520516156.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:56.851Z,1520516156.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:57.235Z,1520516157.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:57.639Z,1520516157.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:58.011Z,1520516158.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:58.407Z,1520516158.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:58.809Z,1520516158.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:59.208Z,1520516159.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:35:59.607Z,1520516159.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:00.007Z,1520516160.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:00.403Z,1520516160.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:00.812Z,1520516160.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:01.240Z,1520516161.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:01.654Z,1520516161.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:02.011Z,1520516162.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:02.410Z,1520516162.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:02.811Z,1520516162.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:03.215Z,1520516163.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:03.636Z,1520516163.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:04.021Z,1520516164.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:04.455Z,1520516164.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:04.827Z,1520516164.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:05.222Z,1520516165.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:05.621Z,1520516165.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:06.024Z,1520516166.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:06.429Z,1520516166.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:06.831Z,1520516166.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:07.236Z,1520516167.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:07.604Z,1520516167.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:08.003Z,1520516168.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:08.404Z,1520516168.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:08.816Z,1520516168.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:09.214Z,1520516169.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:09.614Z,1520516169.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:10.001Z,1520516170.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:10.412Z,1520516170.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:10.817Z,1520516170.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:11.227Z,1520516171.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:11.618Z,1520516171.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:12.031Z,1520516172.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:12.408Z,1520516172.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:12.830Z,1520516172.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:13.211Z,1520516173.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:13.604Z,1520516173.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:14.004Z,1520516174.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:14.406Z,1520516174.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:14.830Z,1520516174.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:15.208Z,1520516175.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:15.614Z,1520516175.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:16.041Z,1520516176.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:16.415Z,1520516176.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:16.870Z,1520516176.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:17.223Z,1520516177.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:17.619Z,1520516177.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:18.008Z,1520516178.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:18.409Z,1520516178.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:18.813Z,1520516178.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:19.226Z,1520516179.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:19.612Z,1520516179.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:20.010Z,1520516180.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:20.416Z,1520516180.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:20.816Z,1520516180.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:21.214Z,1520516181.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:21.617Z,1520516181.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:22.006Z,1520516182.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:22.406Z,1520516182.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:22.816Z,1520516182.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:23.212Z,1520516183.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:23.622Z,1520516183.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:24.006Z,1520516184.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:24.403Z,1520516184.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:24.815Z,1520516184.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:24.818Z,1520516184.818 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T13:31:24.6Z
2018-03-08T13:36:24.818Z,1520516184.818 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T13:36:24.819Z,1520516184.819 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T13:36:25.225Z,1520516185.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:28.412Z,1520516188.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:28.523Z,1520516188.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:28.860Z,1520516188.860 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0136.lzma
2018-03-08T13:36:28.925Z,1520516188.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:29.322Z,1520516189.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:29.659Z,1520516189.659 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0136.lzma.bak
2018-03-08T13:36:29.659Z,1520516189.659 [DataOverHttps](INFO): SBD MOMSN=7986110
2018-03-08T13:36:29.699Z,1520516189.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:30.286Z,1520516190.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:30.496Z,1520516190.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:30.919Z,1520516190.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:34.487Z,1520516194.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:34.627Z,1520516194.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:35.042Z,1520516195.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:35.407Z,1520516195.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:35.796Z,1520516195.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:36.191Z,1520516196.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:36.587Z,1520516196.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:39.688Z,1520516199.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:39.806Z,1520516199.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:40.121Z,1520516200.121 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0137.lzma
2018-03-08T13:36:40.182Z,1520516200.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:40.578Z,1520516200.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:40.919Z,1520516200.919 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0137.lzma.bak
2018-03-08T13:36:40.919Z,1520516200.919 [DataOverHttps](INFO): SBD MOMSN=7986112
2018-03-08T13:36:40.994Z,1520516200.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:41.539Z,1520516201.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:41.542Z,1520516201.542 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T13:36:41.542Z,1520516201.542 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T13:36:41.542Z,1520516201.542 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T13:36:41.754Z,1520516201.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:45.101Z,1520516205.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:45.223Z,1520516205.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:45.650Z,1520516205.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:46.041Z,1520516206.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:46.442Z,1520516206.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:46.811Z,1520516206.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:47.207Z,1520516207.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:47.605Z,1520516207.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:48.020Z,1520516208.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:48.416Z,1520516208.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:48.818Z,1520516208.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:49.245Z,1520516209.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:49.622Z,1520516209.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:50.010Z,1520516210.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:50.419Z,1520516210.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:50.821Z,1520516210.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:51.218Z,1520516211.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:51.665Z,1520516211.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:52.014Z,1520516212.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:52.412Z,1520516212.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:52.819Z,1520516212.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:53.202Z,1520516213.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:53.603Z,1520516213.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:54.023Z,1520516214.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:54.436Z,1520516214.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:54.823Z,1520516214.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:55.225Z,1520516215.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:55.614Z,1520516215.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:56.009Z,1520516216.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:56.406Z,1520516216.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:56.818Z,1520516216.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:57.219Z,1520516217.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:57.612Z,1520516217.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:58.011Z,1520516218.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:58.412Z,1520516218.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:58.843Z,1520516218.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:59.217Z,1520516219.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:36:59.615Z,1520516219.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:00.018Z,1520516220.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:00.414Z,1520516220.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:00.821Z,1520516220.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:01.224Z,1520516221.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:01.634Z,1520516221.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:02.017Z,1520516222.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:02.417Z,1520516222.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:02.822Z,1520516222.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:03.227Z,1520516223.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:03.620Z,1520516223.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:04.021Z,1520516224.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:04.400Z,1520516224.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:04.841Z,1520516224.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:05.212Z,1520516225.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:05.620Z,1520516225.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:06.010Z,1520516226.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:06.410Z,1520516226.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:06.813Z,1520516226.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:07.212Z,1520516227.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:07.613Z,1520516227.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:08.005Z,1520516228.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:08.406Z,1520516228.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:08.817Z,1520516228.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:09.211Z,1520516229.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:09.612Z,1520516229.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:10.012Z,1520516230.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:10.404Z,1520516230.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:10.813Z,1520516230.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:11.217Z,1520516231.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:11.613Z,1520516231.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:12.017Z,1520516232.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:12.415Z,1520516232.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:12.823Z,1520516232.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:13.223Z,1520516233.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:13.618Z,1520516233.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:14.011Z,1520516234.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:14.406Z,1520516234.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:14.817Z,1520516234.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:15.223Z,1520516235.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:15.627Z,1520516235.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:16.050Z,1520516236.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:16.407Z,1520516236.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:16.816Z,1520516236.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:17.219Z,1520516237.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:17.620Z,1520516237.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:18.018Z,1520516238.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:18.410Z,1520516238.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:18.827Z,1520516238.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:19.223Z,1520516239.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:19.627Z,1520516239.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:20.010Z,1520516240.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:20.414Z,1520516240.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:20.826Z,1520516240.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:21.216Z,1520516241.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:21.631Z,1520516241.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:22.054Z,1520516242.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:22.431Z,1520516242.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:22.823Z,1520516242.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:23.226Z,1520516243.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:23.625Z,1520516243.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:24.003Z,1520516244.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:24.405Z,1520516244.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:24.839Z,1520516244.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:25.223Z,1520516245.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:25.654Z,1520516245.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:26.004Z,1520516246.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:26.405Z,1520516246.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:26.837Z,1520516246.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:27.243Z,1520516247.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:27.638Z,1520516247.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:28.042Z,1520516248.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:28.410Z,1520516248.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:28.812Z,1520516248.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:29.212Z,1520516249.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:29.634Z,1520516249.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:30.008Z,1520516250.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:30.406Z,1520516250.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:30.834Z,1520516250.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:31.212Z,1520516251.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:31.638Z,1520516251.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:32.014Z,1520516252.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:32.410Z,1520516252.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:32.842Z,1520516252.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:33.235Z,1520516253.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:33.608Z,1520516253.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:34.007Z,1520516254.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:34.405Z,1520516254.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:34.834Z,1520516254.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:35.237Z,1520516255.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:35.634Z,1520516255.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:36.010Z,1520516256.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:36.406Z,1520516256.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:36.834Z,1520516256.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:37.212Z,1520516257.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:37.638Z,1520516257.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:38.014Z,1520516258.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:38.405Z,1520516258.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:38.811Z,1520516258.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:39.234Z,1520516259.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:39.615Z,1520516259.615 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:39.615Z,1520516259.615 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 118
2018-03-08T13:37:39.615Z,1520516259.615 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T13:37:39.641Z,1520516259.641 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:39.641Z,1520516259.641 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 118
2018-03-08T13:37:39.641Z,1520516259.641 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T13:37:39.643Z,1520516259.643 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:39.643Z,1520516259.643 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 118
2018-03-08T13:37:39.643Z,1520516259.643 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T13:37:39.667Z,1520516259.667 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T13:37:39.667Z,1520516259.667 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T13:37:39.667Z,1520516259.667 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T13:37:40.017Z,1520516260.017 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T13:37:40.017Z,1520516260.017 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 118
2018-03-08T13:37:40.017Z,1520516260.017 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T13:37:40.017Z,1520516260.017 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 118
2018-03-08T13:37:40.018Z,1520516260.018 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T13:37:40.018Z,1520516260.018 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 118
2018-03-08T13:37:40.405Z,1520516260.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T13:37:40.406Z,1520516260.406 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:37:40.406Z,1520516260.406 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:37:40.406Z,1520516260.406 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T13:37:40.407Z,1520516260.407 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:37:40.407Z,1520516260.407 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:37:40.407Z,1520516260.407 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T13:37:40.408Z,1520516260.408 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:37:40.408Z,1520516260.408 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:37:40.822Z,1520516260.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T13:37:40.823Z,1520516260.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:41.219Z,1520516261.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T13:37:41.220Z,1520516261.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:41.619Z,1520516261.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T13:37:41.621Z,1520516261.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:42.010Z,1520516262.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T13:37:42.011Z,1520516262.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:45.153Z,1520516265.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2018-03-08T13:37:45.154Z,1520516265.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:45.292Z,1520516265.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T13:37:45.293Z,1520516265.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:45.654Z,1520516265.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T13:37:45.655Z,1520516265.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:46.049Z,1520516266.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T13:37:46.050Z,1520516266.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:46.426Z,1520516266.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T13:37:46.427Z,1520516266.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:46.830Z,1520516266.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T13:37:46.831Z,1520516266.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:47.233Z,1520516267.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T13:37:47.234Z,1520516267.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:47.624Z,1520516267.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T13:37:47.625Z,1520516267.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:48.032Z,1520516268.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T13:37:48.033Z,1520516268.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:48.480Z,1520516268.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-08T13:37:48.482Z,1520516268.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:48.832Z,1520516268.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T13:37:48.833Z,1520516268.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:49.230Z,1520516269.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T13:37:49.231Z,1520516269.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:49.630Z,1520516269.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T13:37:49.631Z,1520516269.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:50.038Z,1520516270.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T13:37:50.039Z,1520516270.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:50.429Z,1520516270.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T13:37:50.430Z,1520516270.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:50.838Z,1520516270.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T13:37:50.839Z,1520516270.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:51.236Z,1520516271.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T13:37:51.237Z,1520516271.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:51.636Z,1520516271.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T13:37:51.637Z,1520516271.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:52.029Z,1520516272.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T13:37:52.030Z,1520516272.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:52.425Z,1520516272.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T13:37:52.425Z,1520516272.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:52.825Z,1520516272.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T13:37:52.826Z,1520516272.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:53.241Z,1520516273.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T13:37:53.242Z,1520516273.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:53.634Z,1520516273.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T13:37:53.635Z,1520516273.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:54.046Z,1520516274.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T13:37:54.047Z,1520516274.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:54.440Z,1520516274.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T13:37:54.441Z,1520516274.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:54.840Z,1520516274.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T13:37:54.841Z,1520516274.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:55.231Z,1520516275.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T13:37:55.232Z,1520516275.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:55.626Z,1520516275.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T13:37:55.627Z,1520516275.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:56.027Z,1520516276.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T13:37:56.029Z,1520516276.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:56.427Z,1520516276.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T13:37:56.427Z,1520516276.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:56.840Z,1520516276.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T13:37:56.841Z,1520516276.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:57.249Z,1520516277.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T13:37:57.250Z,1520516277.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:57.639Z,1520516277.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T13:37:57.641Z,1520516277.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:58.034Z,1520516278.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T13:37:58.035Z,1520516278.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:58.431Z,1520516278.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T13:37:58.433Z,1520516278.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:58.869Z,1520516278.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T13:37:58.870Z,1520516278.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:59.269Z,1520516279.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T13:37:59.269Z,1520516279.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:37:59.619Z,1520516279.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:00.049Z,1520516280.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:00.455Z,1520516280.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:00.832Z,1520516280.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:01.230Z,1520516281.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:01.626Z,1520516281.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:02.027Z,1520516282.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:02.424Z,1520516282.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:02.839Z,1520516282.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:03.256Z,1520516283.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:03.628Z,1520516283.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:04.027Z,1520516284.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:04.431Z,1520516284.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:04.829Z,1520516284.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:05.231Z,1520516285.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:05.658Z,1520516285.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:06.024Z,1520516286.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:06.462Z,1520516286.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:06.834Z,1520516286.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:07.233Z,1520516287.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:07.642Z,1520516287.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:08.036Z,1520516288.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:08.440Z,1520516288.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:08.839Z,1520516288.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:09.310Z,1520516289.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:09.651Z,1520516289.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:10.034Z,1520516290.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:10.433Z,1520516290.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:10.836Z,1520516290.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:11.254Z,1520516291.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:11.624Z,1520516291.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:12.019Z,1520516292.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:12.435Z,1520516292.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:12.835Z,1520516292.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:13.238Z,1520516293.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:13.635Z,1520516293.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:14.029Z,1520516294.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:14.427Z,1520516294.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:14.826Z,1520516294.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:15.231Z,1520516295.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:15.629Z,1520516295.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:16.037Z,1520516296.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:16.436Z,1520516296.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:16.842Z,1520516296.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:17.231Z,1520516297.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:17.630Z,1520516297.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:18.026Z,1520516298.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:18.439Z,1520516298.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:18.847Z,1520516298.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:19.257Z,1520516299.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:19.644Z,1520516299.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:20.043Z,1520516300.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:20.425Z,1520516300.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:20.822Z,1520516300.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:21.227Z,1520516301.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:21.630Z,1520516301.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:22.047Z,1520516302.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:22.451Z,1520516302.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:22.847Z,1520516302.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:23.231Z,1520516303.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:23.624Z,1520516303.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:24.030Z,1520516304.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:24.427Z,1520516304.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:24.850Z,1520516304.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:25.247Z,1520516305.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:25.636Z,1520516305.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:26.031Z,1520516306.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:26.430Z,1520516306.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:26.828Z,1520516306.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:27.233Z,1520516307.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:27.628Z,1520516307.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:28.037Z,1520516308.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:28.438Z,1520516308.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:28.842Z,1520516308.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:29.232Z,1520516309.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:29.627Z,1520516309.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:30.031Z,1520516310.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:30.427Z,1520516310.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:30.837Z,1520516310.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:31.243Z,1520516311.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:31.637Z,1520516311.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:32.024Z,1520516312.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:32.424Z,1520516312.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:32.828Z,1520516312.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:33.232Z,1520516313.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:33.635Z,1520516313.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:34.041Z,1520516314.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:34.440Z,1520516314.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:34.836Z,1520516314.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:35.239Z,1520516315.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:35.643Z,1520516315.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:36.028Z,1520516316.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:36.430Z,1520516316.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:36.837Z,1520516316.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:37.251Z,1520516317.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:37.689Z,1520516317.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:38.034Z,1520516318.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:38.438Z,1520516318.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:38.829Z,1520516318.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:39.232Z,1520516319.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:39.634Z,1520516319.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:40.041Z,1520516320.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:40.441Z,1520516320.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:40.836Z,1520516320.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:41.229Z,1520516321.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:41.627Z,1520516321.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:42.034Z,1520516322.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:45.129Z,1520516325.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:45.271Z,1520516325.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:45.627Z,1520516325.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:46.024Z,1520516326.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:46.399Z,1520516326.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:46.836Z,1520516326.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:47.207Z,1520516327.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:47.598Z,1520516327.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:48.031Z,1520516328.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:48.424Z,1520516328.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:48.842Z,1520516328.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:49.256Z,1520516329.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:49.617Z,1520516329.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:50.010Z,1520516330.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:50.399Z,1520516330.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:50.814Z,1520516330.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:51.209Z,1520516331.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:51.618Z,1520516331.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:52.003Z,1520516332.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:52.401Z,1520516332.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:52.814Z,1520516332.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:53.224Z,1520516333.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:53.618Z,1520516333.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:54.004Z,1520516334.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:54.402Z,1520516334.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:54.809Z,1520516334.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:55.218Z,1520516335.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:55.625Z,1520516335.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:56.017Z,1520516336.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:56.409Z,1520516336.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:56.818Z,1520516336.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:57.218Z,1520516337.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:57.618Z,1520516337.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:58.015Z,1520516338.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:58.413Z,1520516338.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:58.818Z,1520516338.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:59.222Z,1520516339.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:38:59.623Z,1520516339.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:00.010Z,1520516340.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:00.393Z,1520516340.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:00.816Z,1520516340.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:01.226Z,1520516341.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:01.610Z,1520516341.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:02.006Z,1520516342.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:02.418Z,1520516342.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:02.813Z,1520516342.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:03.209Z,1520516343.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:03.618Z,1520516343.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:04.011Z,1520516344.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:04.407Z,1520516344.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:04.809Z,1520516344.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:05.242Z,1520516345.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:05.609Z,1520516345.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:06.004Z,1520516346.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:06.402Z,1520516346.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:06.815Z,1520516346.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:07.219Z,1520516347.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:07.613Z,1520516347.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:08.023Z,1520516348.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:08.433Z,1520516348.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:08.835Z,1520516348.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:09.224Z,1520516349.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:09.624Z,1520516349.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:09.995Z,1520516349.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:10.403Z,1520516350.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:10.827Z,1520516350.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:11.227Z,1520516351.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:11.631Z,1520516351.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:12.002Z,1520516352.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:12.398Z,1520516352.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:12.800Z,1520516352.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:13.232Z,1520516353.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:13.641Z,1520516353.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:14.006Z,1520516354.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:14.402Z,1520516354.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:14.828Z,1520516354.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:15.204Z,1520516355.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:15.612Z,1520516355.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:16.003Z,1520516356.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:16.412Z,1520516356.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:16.810Z,1520516356.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:17.235Z,1520516357.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:17.612Z,1520516357.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:18.015Z,1520516358.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:18.419Z,1520516358.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:18.813Z,1520516358.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:19.212Z,1520516359.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:19.624Z,1520516359.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:20.004Z,1520516360.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:20.406Z,1520516360.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:20.813Z,1520516360.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:21.223Z,1520516361.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:21.619Z,1520516361.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:22.006Z,1520516362.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:22.403Z,1520516362.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:22.819Z,1520516362.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:23.234Z,1520516363.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:23.622Z,1520516363.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:24.020Z,1520516364.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:24.414Z,1520516364.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:24.818Z,1520516364.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:25.226Z,1520516365.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:25.614Z,1520516365.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:25.995Z,1520516365.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:26.415Z,1520516366.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:26.819Z,1520516366.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:27.221Z,1520516367.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:27.631Z,1520516367.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:27.998Z,1520516367.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:28.442Z,1520516368.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:28.875Z,1520516368.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:29.330Z,1520516369.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:29.668Z,1520516369.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:30.026Z,1520516370.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:30.402Z,1520516370.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:30.807Z,1520516370.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:31.208Z,1520516371.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:31.614Z,1520516371.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:32.003Z,1520516372.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:32.405Z,1520516372.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:32.807Z,1520516372.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:33.217Z,1520516373.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:33.607Z,1520516373.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:34.003Z,1520516374.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:34.401Z,1520516374.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:34.814Z,1520516374.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:35.207Z,1520516375.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:35.607Z,1520516375.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:36.003Z,1520516376.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:36.398Z,1520516376.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:36.808Z,1520516376.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:37.208Z,1520516377.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:37.609Z,1520516377.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:38.004Z,1520516378.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:38.406Z,1520516378.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:38.809Z,1520516378.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:39.208Z,1520516379.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:39.607Z,1520516379.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:39.997Z,1520516379.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:40.402Z,1520516380.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:40.812Z,1520516380.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:41.208Z,1520516381.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:41.615Z,1520516381.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:42.007Z,1520516382.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:42.400Z,1520516382.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:46.349Z,1520516386.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:46.478Z,1520516386.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:46.848Z,1520516386.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:47.218Z,1520516387.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:47.621Z,1520516387.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:48.017Z,1520516388.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:48.452Z,1520516388.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:48.824Z,1520516388.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:49.224Z,1520516389.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:49.624Z,1520516389.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:50.022Z,1520516390.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:50.420Z,1520516390.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:50.824Z,1520516390.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:51.252Z,1520516391.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:51.630Z,1520516391.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:52.043Z,1520516392.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:52.443Z,1520516392.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:52.819Z,1520516392.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:53.218Z,1520516393.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:53.615Z,1520516393.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:54.040Z,1520516394.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:54.421Z,1520516394.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:54.842Z,1520516394.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:55.245Z,1520516395.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:55.611Z,1520516395.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:56.019Z,1520516396.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:56.424Z,1520516396.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:56.847Z,1520516396.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:57.241Z,1520516397.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:57.633Z,1520516397.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:58.015Z,1520516398.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:58.415Z,1520516398.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:58.824Z,1520516398.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:59.227Z,1520516399.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:39:59.624Z,1520516399.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:00.020Z,1520516400.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:00.419Z,1520516400.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:00.846Z,1520516400.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:01.225Z,1520516401.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:01.619Z,1520516401.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:02.024Z,1520516402.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:02.419Z,1520516402.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:02.847Z,1520516402.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:03.232Z,1520516403.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:03.625Z,1520516403.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:04.057Z,1520516404.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:04.427Z,1520516404.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:04.825Z,1520516404.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:05.223Z,1520516405.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:05.624Z,1520516405.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:06.029Z,1520516406.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:06.428Z,1520516406.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:06.838Z,1520516406.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:07.236Z,1520516407.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:07.628Z,1520516407.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:08.042Z,1520516408.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:08.430Z,1520516408.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:08.833Z,1520516408.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:09.235Z,1520516409.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:09.633Z,1520516409.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:10.018Z,1520516410.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:10.423Z,1520516410.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:10.833Z,1520516410.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:11.230Z,1520516411.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:11.637Z,1520516411.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:12.025Z,1520516412.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:12.418Z,1520516412.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:12.829Z,1520516412.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:13.231Z,1520516413.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:13.619Z,1520516413.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:14.038Z,1520516414.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:14.436Z,1520516414.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:14.835Z,1520516414.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:15.234Z,1520516415.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:15.612Z,1520516415.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:16.016Z,1520516416.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:16.439Z,1520516416.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:16.845Z,1520516416.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:17.224Z,1520516417.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:17.655Z,1520516417.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:18.014Z,1520516418.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:18.460Z,1520516418.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:18.828Z,1520516418.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:19.276Z,1520516419.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:19.631Z,1520516419.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:20.032Z,1520516420.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:20.429Z,1520516420.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:20.829Z,1520516420.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:21.225Z,1520516421.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:21.623Z,1520516421.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:22.026Z,1520516422.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:22.420Z,1520516422.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:22.831Z,1520516422.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:23.234Z,1520516423.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:23.633Z,1520516423.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:24.030Z,1520516424.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:24.454Z,1520516424.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:24.833Z,1520516424.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:25.237Z,1520516425.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:25.647Z,1520516425.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:26.077Z,1520516426.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:26.437Z,1520516426.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:26.824Z,1520516426.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:27.232Z,1520516427.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:27.630Z,1520516427.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:28.023Z,1520516428.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:28.421Z,1520516428.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:28.828Z,1520516428.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:29.228Z,1520516429.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:29.630Z,1520516429.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:30.023Z,1520516430.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:30.423Z,1520516430.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:30.833Z,1520516430.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:31.230Z,1520516431.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:31.632Z,1520516431.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:32.023Z,1520516432.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:32.426Z,1520516432.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:32.842Z,1520516432.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:33.243Z,1520516433.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:33.634Z,1520516433.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:34.030Z,1520516434.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:34.419Z,1520516434.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:34.826Z,1520516434.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:35.240Z,1520516435.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:35.633Z,1520516435.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:36.021Z,1520516436.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:36.421Z,1520516436.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:36.832Z,1520516436.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:37.228Z,1520516437.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:37.634Z,1520516437.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:38.024Z,1520516438.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:38.426Z,1520516438.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:38.837Z,1520516438.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:39.236Z,1520516439.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:39.626Z,1520516439.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:40.021Z,1520516440.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:40.426Z,1520516440.426 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:40.427Z,1520516440.427 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 119
2018-03-08T13:40:40.427Z,1520516440.427 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T13:40:40.429Z,1520516440.429 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:40.429Z,1520516440.429 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 119
2018-03-08T13:40:40.429Z,1520516440.429 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T13:40:40.430Z,1520516440.430 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:40.431Z,1520516440.431 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 119
2018-03-08T13:40:40.431Z,1520516440.431 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T13:40:40.442Z,1520516440.442 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T13:40:40.442Z,1520516440.442 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T13:40:40.443Z,1520516440.443 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T13:40:40.841Z,1520516440.841 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T13:40:40.841Z,1520516440.841 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 119
2018-03-08T13:40:40.842Z,1520516440.842 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T13:40:40.842Z,1520516440.842 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 119
2018-03-08T13:40:40.842Z,1520516440.842 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T13:40:40.842Z,1520516440.842 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 119
2018-03-08T13:40:41.242Z,1520516441.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T13:40:41.242Z,1520516441.242 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:40:41.242Z,1520516441.242 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:40:41.243Z,1520516441.243 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T13:40:41.243Z,1520516441.243 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:40:41.243Z,1520516441.243 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:40:41.244Z,1520516441.244 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T13:40:41.244Z,1520516441.244 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:40:41.249Z,1520516441.249 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:40:41.643Z,1520516441.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T13:40:41.644Z,1520516441.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:42.011Z,1520516442.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T13:40:42.011Z,1520516442.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:42.442Z,1520516442.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T13:40:42.442Z,1520516442.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:46.386Z,1520516446.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T13:40:46.387Z,1520516446.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:46.502Z,1520516446.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T13:40:46.503Z,1520516446.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:46.910Z,1520516446.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-08T13:40:46.911Z,1520516446.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:47.264Z,1520516447.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T13:40:47.265Z,1520516447.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:47.669Z,1520516447.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T13:40:47.670Z,1520516447.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:48.075Z,1520516448.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T13:40:48.076Z,1520516448.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:48.467Z,1520516448.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T13:40:48.468Z,1520516448.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:48.868Z,1520516448.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T13:40:48.869Z,1520516448.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:49.298Z,1520516449.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-08T13:40:49.299Z,1520516449.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:49.700Z,1520516449.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-08T13:40:49.701Z,1520516449.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:50.094Z,1520516450.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-08T13:40:50.096Z,1520516450.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:50.469Z,1520516450.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T13:40:50.470Z,1520516450.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:50.885Z,1520516450.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-08T13:40:50.886Z,1520516450.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:51.276Z,1520516451.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T13:40:51.277Z,1520516451.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:51.678Z,1520516451.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T13:40:51.679Z,1520516451.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:52.101Z,1520516452.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T13:40:52.102Z,1520516452.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:52.479Z,1520516452.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T13:40:52.481Z,1520516452.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:52.883Z,1520516452.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T13:40:52.884Z,1520516452.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:53.306Z,1520516453.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-08T13:40:53.307Z,1520516453.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:53.674Z,1520516453.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T13:40:53.675Z,1520516453.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:54.080Z,1520516454.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-08T13:40:54.082Z,1520516454.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:54.476Z,1520516454.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T13:40:54.477Z,1520516454.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:54.879Z,1520516454.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-08T13:40:54.880Z,1520516454.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:55.279Z,1520516455.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T13:40:55.280Z,1520516455.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:55.680Z,1520516455.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-08T13:40:55.682Z,1520516455.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:56.063Z,1520516456.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T13:40:56.073Z,1520516456.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:56.494Z,1520516456.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T13:40:56.496Z,1520516456.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:56.895Z,1520516456.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T13:40:56.897Z,1520516456.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:57.263Z,1520516457.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T13:40:57.263Z,1520516457.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:57.695Z,1520516457.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-08T13:40:57.696Z,1520516457.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:58.093Z,1520516458.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T13:40:58.095Z,1520516458.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:58.497Z,1520516458.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-08T13:40:58.498Z,1520516458.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:58.913Z,1520516458.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-08T13:40:58.914Z,1520516458.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:59.288Z,1520516459.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T13:40:59.289Z,1520516459.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:40:59.703Z,1520516459.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T13:40:59.704Z,1520516459.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:00.098Z,1520516460.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T13:41:00.099Z,1520516460.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:00.463Z,1520516460.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:00.967Z,1520516460.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:01.315Z,1520516461.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:01.711Z,1520516461.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:02.090Z,1520516462.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:02.476Z,1520516462.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:02.874Z,1520516462.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:03.271Z,1520516463.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:03.672Z,1520516463.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:04.087Z,1520516464.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:04.510Z,1520516464.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:04.911Z,1520516464.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:05.284Z,1520516465.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:05.679Z,1520516465.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:06.076Z,1520516466.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:06.479Z,1520516466.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:06.889Z,1520516466.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:07.294Z,1520516467.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:07.713Z,1520516467.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:08.073Z,1520516468.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:08.475Z,1520516468.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:08.880Z,1520516468.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:09.277Z,1520516469.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:09.671Z,1520516469.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:10.089Z,1520516470.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:10.516Z,1520516470.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:10.912Z,1520516470.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:11.279Z,1520516471.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:11.678Z,1520516471.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:12.082Z,1520516472.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:12.482Z,1520516472.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:12.886Z,1520516472.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:13.290Z,1520516473.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:13.685Z,1520516473.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:14.073Z,1520516474.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:14.475Z,1520516474.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:14.886Z,1520516474.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:15.281Z,1520516475.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:15.683Z,1520516475.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:16.081Z,1520516476.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:16.489Z,1520516476.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:16.898Z,1520516476.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:17.278Z,1520516477.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:17.683Z,1520516477.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:18.074Z,1520516478.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:18.477Z,1520516478.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:18.884Z,1520516478.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:19.323Z,1520516479.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:19.694Z,1520516479.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:20.081Z,1520516480.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:20.475Z,1520516480.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:20.879Z,1520516480.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:21.285Z,1520516481.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:21.686Z,1520516481.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:22.086Z,1520516482.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:22.488Z,1520516482.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:22.902Z,1520516482.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:23.307Z,1520516483.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:23.725Z,1520516483.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:24.082Z,1520516484.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:24.459Z,1520516484.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:24.892Z,1520516484.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:25.306Z,1520516485.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:25.685Z,1520516485.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:26.087Z,1520516486.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:26.492Z,1520516486.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:26.894Z,1520516486.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:27.271Z,1520516487.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:27.667Z,1520516487.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:28.102Z,1520516488.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:28.504Z,1520516488.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:28.896Z,1520516488.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:29.271Z,1520516489.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:29.675Z,1520516489.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:30.072Z,1520516490.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:30.473Z,1520516490.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:30.902Z,1520516490.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:31.280Z,1520516491.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:31.701Z,1520516491.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:32.071Z,1520516492.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:32.475Z,1520516492.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:32.876Z,1520516492.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:33.274Z,1520516493.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:33.672Z,1520516493.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:34.084Z,1520516494.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:34.485Z,1520516494.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:34.907Z,1520516494.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:35.275Z,1520516495.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:35.667Z,1520516495.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:36.080Z,1520516496.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:36.479Z,1520516496.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:36.880Z,1520516496.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:37.306Z,1520516497.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:37.682Z,1520516497.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:38.110Z,1520516498.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:38.479Z,1520516498.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:38.884Z,1520516498.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:39.314Z,1520516499.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:39.707Z,1520516499.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:40.121Z,1520516500.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:40.512Z,1520516500.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:40.885Z,1520516500.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:41.308Z,1520516501.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:41.674Z,1520516501.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:42.083Z,1520516502.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:42.086Z,1520516502.086 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T13:41:42.087Z,1520516502.087 [Default:CheckIn:C.Wait] Stopped
2018-03-08T13:41:42.087Z,1520516502.087 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T13:41:42.087Z,1520516502.087 [Default:CheckIn:D] Running Loop=1
2018-03-08T13:41:42.482Z,1520516502.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:42.489Z,1520516502.489 [Default:CheckIn:D] Stopped
2018-03-08T13:41:42.489Z,1520516502.489 [Default:CheckIn:E] Running Loop=1
2018-03-08T13:41:46.031Z,1520516506.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:46.035Z,1520516506.035 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 355.961393 min 
2018-03-08T13:41:46.035Z,1520516506.035 [Default:CheckIn:E] Stopped
2018-03-08T13:41:46.035Z,1520516506.035 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T13:41:46.035Z,1520516506.035 [Default:CheckIn] Stopped
2018-03-08T13:41:46.035Z,1520516506.035 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T13:41:46.035Z,1520516506.035 [Default:CheckIn](INFO): Running loop #35
2018-03-08T13:41:46.035Z,1520516506.035 [Default:CheckIn] Running Loop=35
2018-03-08T13:41:46.036Z,1520516506.036 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T13:41:46.036Z,1520516506.036 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T13:41:46.217Z,1520516506.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:46.572Z,1520516506.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:46.968Z,1520516506.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:47.359Z,1520516507.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:47.762Z,1520516507.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:48.177Z,1520516508.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:48.574Z,1520516508.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:48.588Z,1520516508.588 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T13:41:48.964Z,1520516508.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:49.367Z,1520516509.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:49.747Z,1520516509.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:50.151Z,1520516510.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:50.514Z,1520516510.514 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-03-08T13:41:50.514Z,1520516510.514 [DropWeight] Hardware Fault, FailCount= 1
2018-03-08T13:41:50.514Z,1520516510.514 [DropWeight](ERROR): Hardware Fault
2018-03-08T13:41:50.547Z,1520516510.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:50.578Z,1520516510.578 [CBIT](INFO): Critical error at 20180308T134150
2018-03-08T13:41:50.581Z,1520516510.581 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-03-08T13:41:50.581Z,1520516510.581 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-03-08T13:41:50.978Z,1520516510.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:50.989Z,1520516510.989 [CBIT](INFO): Critical error at 20180308T134150
2018-03-08T13:41:51.379Z,1520516511.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:51.791Z,1520516511.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:52.151Z,1520516512.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:52.550Z,1520516512.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:52.951Z,1520516512.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:53.356Z,1520516513.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:53.790Z,1520516513.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:54.157Z,1520516514.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:54.559Z,1520516514.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:54.956Z,1520516514.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:55.354Z,1520516515.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:55.753Z,1520516515.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:56.150Z,1520516516.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:56.550Z,1520516516.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:56.956Z,1520516516.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:57.356Z,1520516517.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:57.757Z,1520516517.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:58.154Z,1520516518.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:58.558Z,1520516518.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:58.952Z,1520516518.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:59.351Z,1520516519.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:41:59.750Z,1520516519.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:00.197Z,1520516520.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:00.583Z,1520516520.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:00.957Z,1520516520.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:01.362Z,1520516521.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:01.779Z,1520516521.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:02.153Z,1520516522.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:02.557Z,1520516522.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:02.966Z,1520516522.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:03.367Z,1520516523.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:03.770Z,1520516523.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:04.151Z,1520516524.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:04.563Z,1520516524.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:04.966Z,1520516524.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:05.362Z,1520516525.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:05.745Z,1520516525.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:06.167Z,1520516526.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:06.578Z,1520516526.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:06.983Z,1520516526.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:07.395Z,1520516527.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:07.750Z,1520516527.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:08.150Z,1520516528.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:08.549Z,1520516528.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:08.972Z,1520516528.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:09.377Z,1520516529.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:09.822Z,1520516529.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:10.173Z,1520516530.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:10.546Z,1520516530.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:10.954Z,1520516530.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:11.352Z,1520516531.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:11.750Z,1520516531.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:12.171Z,1520516532.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:12.591Z,1520516532.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:12.955Z,1520516532.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:13.363Z,1520516533.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:13.755Z,1520516533.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:14.153Z,1520516534.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:14.556Z,1520516534.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:14.968Z,1520516534.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:15.366Z,1520516535.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:15.774Z,1520516535.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:16.154Z,1520516536.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:16.558Z,1520516536.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:16.955Z,1520516536.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:17.370Z,1520516537.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:17.763Z,1520516537.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:18.170Z,1520516538.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:18.572Z,1520516538.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:18.966Z,1520516538.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:19.340Z,1520516539.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:19.765Z,1520516539.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:20.144Z,1520516540.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:20.540Z,1520516540.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:20.967Z,1520516540.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:21.375Z,1520516541.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:21.769Z,1520516541.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:22.150Z,1520516542.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:22.549Z,1520516542.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:22.948Z,1520516542.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:23.351Z,1520516543.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:23.751Z,1520516543.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:24.149Z,1520516544.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:24.576Z,1520516544.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:24.978Z,1520516544.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:25.348Z,1520516545.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:25.748Z,1520516545.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:26.149Z,1520516546.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:26.547Z,1520516546.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:26.992Z,1520516546.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:27.381Z,1520516547.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:27.754Z,1520516547.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:28.152Z,1520516548.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:28.547Z,1520516548.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:28.951Z,1520516548.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:29.353Z,1520516549.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:29.749Z,1520516549.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:30.153Z,1520516550.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:30.578Z,1520516550.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:30.980Z,1520516550.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:31.347Z,1520516551.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:31.755Z,1520516551.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:32.150Z,1520516552.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:32.559Z,1520516552.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:33.003Z,1520516553.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:33.479Z,1520516553.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:33.775Z,1520516553.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:34.164Z,1520516554.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:34.558Z,1520516554.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:34.962Z,1520516554.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:35.359Z,1520516555.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:35.739Z,1520516555.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:36.166Z,1520516556.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:36.578Z,1520516556.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:36.965Z,1520516556.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:37.340Z,1520516557.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:37.768Z,1520516557.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:38.187Z,1520516558.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:38.548Z,1520516558.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:38.968Z,1520516558.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:39.374Z,1520516559.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:39.751Z,1520516559.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:40.164Z,1520516560.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:40.558Z,1520516560.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:40.957Z,1520516560.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:41.352Z,1520516561.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:41.752Z,1520516561.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:42.166Z,1520516562.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:42.568Z,1520516562.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:45.653Z,1520516565.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:45.773Z,1520516565.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:46.126Z,1520516566.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:46.527Z,1520516566.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:46.938Z,1520516566.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:47.329Z,1520516567.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:47.727Z,1520516567.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:48.132Z,1520516568.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:48.537Z,1520516568.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:48.933Z,1520516568.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:49.321Z,1520516569.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:49.735Z,1520516569.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:50.132Z,1520516570.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:50.522Z,1520516570.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:50.936Z,1520516570.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:51.335Z,1520516571.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:51.736Z,1520516571.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:52.135Z,1520516572.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:52.530Z,1520516572.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:52.925Z,1520516572.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:53.334Z,1520516573.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:53.729Z,1520516573.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:54.162Z,1520516574.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:54.537Z,1520516574.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:54.939Z,1520516574.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:55.334Z,1520516575.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:55.753Z,1520516575.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:56.134Z,1520516576.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:56.544Z,1520516576.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:56.947Z,1520516576.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:57.370Z,1520516577.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:57.739Z,1520516577.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:58.130Z,1520516578.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:58.524Z,1520516578.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:58.923Z,1520516578.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:59.322Z,1520516579.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:42:59.721Z,1520516579.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:00.125Z,1520516580.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:00.548Z,1520516580.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:00.928Z,1520516580.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:01.323Z,1520516581.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:01.727Z,1520516581.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:02.121Z,1520516582.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:02.526Z,1520516582.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:02.950Z,1520516582.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:03.349Z,1520516583.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:03.725Z,1520516583.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:04.123Z,1520516584.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:04.524Z,1520516584.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:04.950Z,1520516584.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:05.331Z,1520516585.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:05.722Z,1520516585.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:06.126Z,1520516586.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:06.554Z,1520516586.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:06.935Z,1520516586.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:07.317Z,1520516587.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:07.730Z,1520516587.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:08.135Z,1520516588.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:08.530Z,1520516588.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:08.947Z,1520516588.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:09.380Z,1520516589.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:09.736Z,1520516589.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:10.136Z,1520516590.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:10.534Z,1520516590.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:10.931Z,1520516590.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:11.333Z,1520516591.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:11.736Z,1520516591.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:12.143Z,1520516592.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:12.539Z,1520516592.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:12.947Z,1520516592.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:13.311Z,1520516593.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:13.743Z,1520516593.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:14.142Z,1520516594.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:14.517Z,1520516594.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:14.944Z,1520516594.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:15.351Z,1520516595.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:15.748Z,1520516595.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:16.123Z,1520516596.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:16.556Z,1520516596.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:16.921Z,1520516596.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:17.355Z,1520516597.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:17.750Z,1520516597.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:18.197Z,1520516598.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:18.537Z,1520516598.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:18.932Z,1520516598.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:19.340Z,1520516599.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:19.725Z,1520516599.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:20.131Z,1520516600.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:20.529Z,1520516600.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:20.933Z,1520516600.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:21.337Z,1520516601.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:21.736Z,1520516601.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:22.135Z,1520516602.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:22.537Z,1520516602.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:22.935Z,1520516602.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:23.331Z,1520516603.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:23.734Z,1520516603.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:24.141Z,1520516604.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:24.581Z,1520516604.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:24.967Z,1520516604.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:25.334Z,1520516605.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:25.747Z,1520516605.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:26.137Z,1520516606.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:26.519Z,1520516606.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:26.956Z,1520516606.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:27.359Z,1520516607.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:27.755Z,1520516607.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:28.123Z,1520516608.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:28.524Z,1520516608.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:28.921Z,1520516608.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:29.323Z,1520516609.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:29.722Z,1520516609.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:30.135Z,1520516610.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:30.557Z,1520516610.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:30.935Z,1520516610.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:31.323Z,1520516611.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:31.733Z,1520516611.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:32.131Z,1520516612.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:32.531Z,1520516612.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:32.940Z,1520516612.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:33.341Z,1520516613.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:33.746Z,1520516613.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:34.128Z,1520516614.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:34.523Z,1520516614.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:34.927Z,1520516614.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:35.327Z,1520516615.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:35.723Z,1520516615.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:36.136Z,1520516616.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:36.546Z,1520516616.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:36.941Z,1520516616.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:37.335Z,1520516617.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:37.735Z,1520516617.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:38.127Z,1520516618.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:38.529Z,1520516618.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:38.940Z,1520516618.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:39.337Z,1520516619.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:39.739Z,1520516619.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:40.130Z,1520516620.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:40.530Z,1520516620.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:40.935Z,1520516620.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:41.327Z,1520516621.327 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:41.328Z,1520516621.328 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 120
2018-03-08T13:43:41.328Z,1520516621.328 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T13:43:41.329Z,1520516621.329 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:41.330Z,1520516621.330 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 120
2018-03-08T13:43:41.330Z,1520516621.330 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T13:43:41.331Z,1520516621.331 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:41.331Z,1520516621.331 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 120
2018-03-08T13:43:41.331Z,1520516621.331 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T13:43:41.344Z,1520516621.344 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T13:43:41.344Z,1520516621.344 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T13:43:41.345Z,1520516621.345 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T13:43:41.748Z,1520516621.748 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T13:43:41.748Z,1520516621.748 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 120
2018-03-08T13:43:41.748Z,1520516621.748 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T13:43:41.748Z,1520516621.748 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 120
2018-03-08T13:43:41.749Z,1520516621.749 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T13:43:41.749Z,1520516621.749 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 120
2018-03-08T13:43:42.136Z,1520516622.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T13:43:42.137Z,1520516622.137 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:43:42.137Z,1520516622.137 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:43:42.137Z,1520516622.137 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T13:43:42.138Z,1520516622.138 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:43:42.138Z,1520516622.138 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:43:42.138Z,1520516622.138 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T13:43:42.139Z,1520516622.139 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:43:42.139Z,1520516622.139 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:43:42.543Z,1520516622.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T13:43:42.544Z,1520516622.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:42.939Z,1520516622.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T13:43:42.940Z,1520516622.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:46.027Z,1520516626.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2018-03-08T13:43:46.028Z,1520516626.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:46.162Z,1520516626.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T13:43:46.163Z,1520516626.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:46.534Z,1520516626.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T13:43:46.534Z,1520516626.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:46.939Z,1520516626.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T13:43:46.940Z,1520516626.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:47.335Z,1520516627.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T13:43:47.336Z,1520516627.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:47.724Z,1520516627.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T13:43:47.725Z,1520516627.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:48.119Z,1520516628.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T13:43:48.120Z,1520516628.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:48.525Z,1520516628.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T13:43:48.526Z,1520516628.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:48.939Z,1520516628.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T13:43:48.939Z,1520516628.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:49.363Z,1520516629.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T13:43:49.364Z,1520516629.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:49.734Z,1520516629.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T13:43:49.735Z,1520516629.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:50.124Z,1520516630.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T13:43:50.125Z,1520516630.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:50.526Z,1520516630.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T13:43:50.527Z,1520516630.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:50.926Z,1520516630.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T13:43:50.927Z,1520516630.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:51.345Z,1520516631.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T13:43:51.346Z,1520516631.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:51.735Z,1520516631.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T13:43:51.735Z,1520516631.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:52.139Z,1520516632.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T13:43:52.139Z,1520516632.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:52.539Z,1520516632.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T13:43:52.540Z,1520516632.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:52.935Z,1520516632.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T13:43:52.936Z,1520516632.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:53.321Z,1520516633.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T13:43:53.322Z,1520516633.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:53.728Z,1520516633.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T13:43:53.729Z,1520516633.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:54.131Z,1520516634.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T13:43:54.132Z,1520516634.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:54.508Z,1520516634.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T13:43:54.509Z,1520516634.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:54.939Z,1520516634.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T13:43:54.940Z,1520516634.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:55.342Z,1520516635.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T13:43:55.343Z,1520516635.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:55.737Z,1520516635.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T13:43:55.738Z,1520516635.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:56.153Z,1520516636.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T13:43:56.154Z,1520516636.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:56.542Z,1520516636.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T13:43:56.543Z,1520516636.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:56.915Z,1520516636.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T13:43:56.916Z,1520516636.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:57.318Z,1520516637.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T13:43:57.319Z,1520516637.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:57.717Z,1520516637.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T13:43:57.718Z,1520516637.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:58.148Z,1520516638.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T13:43:58.149Z,1520516638.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:58.528Z,1520516638.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T13:43:58.549Z,1520516638.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:58.967Z,1520516638.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T13:43:58.968Z,1520516638.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:59.323Z,1520516639.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T13:43:59.324Z,1520516639.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:43:59.761Z,1520516639.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T13:43:59.762Z,1520516639.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:00.123Z,1520516640.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T13:44:00.124Z,1520516640.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:00.523Z,1520516640.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T13:44:00.523Z,1520516640.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:00.937Z,1520516640.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T13:44:00.938Z,1520516640.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:01.338Z,1520516641.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:01.744Z,1520516641.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:02.147Z,1520516642.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:02.513Z,1520516642.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:02.919Z,1520516642.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:03.319Z,1520516643.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:03.722Z,1520516643.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:04.156Z,1520516644.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:04.545Z,1520516644.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:04.979Z,1520516644.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:05.320Z,1520516645.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:05.725Z,1520516645.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:06.127Z,1520516646.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:06.610Z,1520516646.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:06.944Z,1520516646.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:07.333Z,1520516647.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:07.739Z,1520516647.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:08.126Z,1520516648.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:08.534Z,1520516648.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:08.920Z,1520516648.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:09.321Z,1520516649.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:09.721Z,1520516649.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:10.131Z,1520516650.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:10.532Z,1520516650.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:10.975Z,1520516650.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:11.334Z,1520516651.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:11.736Z,1520516651.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:12.126Z,1520516652.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:12.523Z,1520516652.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:12.924Z,1520516652.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:13.330Z,1520516653.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:13.734Z,1520516653.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:14.130Z,1520516654.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:14.561Z,1520516654.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:14.931Z,1520516654.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:15.330Z,1520516655.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:15.730Z,1520516655.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:16.175Z,1520516656.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:16.559Z,1520516656.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:16.939Z,1520516656.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:17.321Z,1520516657.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:17.730Z,1520516657.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:18.128Z,1520516658.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:18.520Z,1520516658.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:18.937Z,1520516658.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:19.363Z,1520516659.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:19.740Z,1520516659.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:20.124Z,1520516660.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:20.520Z,1520516660.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:20.945Z,1520516660.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:21.351Z,1520516661.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:21.722Z,1520516661.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:22.140Z,1520516662.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:22.544Z,1520516662.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:22.943Z,1520516662.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:23.321Z,1520516663.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:23.720Z,1520516663.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:24.116Z,1520516664.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:24.522Z,1520516664.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:24.928Z,1520516664.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:25.332Z,1520516665.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:25.728Z,1520516665.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:26.125Z,1520516666.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:26.521Z,1520516666.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:26.931Z,1520516666.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:27.334Z,1520516667.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:27.730Z,1520516667.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:28.131Z,1520516668.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:28.532Z,1520516668.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:28.929Z,1520516668.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:29.323Z,1520516669.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:29.729Z,1520516669.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:30.121Z,1520516670.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:30.527Z,1520516670.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:30.934Z,1520516670.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:31.335Z,1520516671.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:31.736Z,1520516671.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:32.130Z,1520516672.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:32.526Z,1520516672.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:32.927Z,1520516672.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:33.322Z,1520516673.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:33.722Z,1520516673.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:34.136Z,1520516674.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:34.532Z,1520516674.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:34.928Z,1520516674.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:35.326Z,1520516675.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:35.730Z,1520516675.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:36.125Z,1520516676.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:36.530Z,1520516676.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:36.932Z,1520516676.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:37.337Z,1520516677.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:37.739Z,1520516677.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:38.125Z,1520516678.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:38.532Z,1520516678.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:38.927Z,1520516678.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:39.329Z,1520516679.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:39.729Z,1520516679.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:40.131Z,1520516680.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:40.538Z,1520516680.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:40.932Z,1520516680.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:41.310Z,1520516681.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:41.716Z,1520516681.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:42.133Z,1520516682.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:42.524Z,1520516682.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:42.935Z,1520516682.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:43.331Z,1520516683.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:46.681Z,1520516686.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:46.819Z,1520516686.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:47.222Z,1520516687.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:47.579Z,1520516687.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:47.980Z,1520516687.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:48.393Z,1520516688.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:48.778Z,1520516688.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:49.176Z,1520516689.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:49.576Z,1520516689.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:49.982Z,1520516689.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:50.372Z,1520516690.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:50.776Z,1520516690.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:51.181Z,1520516691.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:51.576Z,1520516691.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:51.974Z,1520516691.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:52.383Z,1520516692.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:52.722Z,1520516692.722 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T13:44:52.722Z,1520516692.722 [NAL9602] Data Fault, FailCount= 4
2018-03-08T13:44:52.722Z,1520516692.722 [NAL9602](ERROR): Data Fault
2018-03-08T13:44:52.754Z,1520516692.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:52.784Z,1520516692.784 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T13:44:53.130Z,1520516693.130 [NAL9602](INFO): Powering down
2018-03-08T13:44:53.178Z,1520516693.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:53.582Z,1520516693.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:53.961Z,1520516693.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:53.990Z,1520516693.990 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T13:44:53.990Z,1520516693.990 [NAL9602] No Fault, FailCount= 4
2018-03-08T13:44:54.390Z,1520516694.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:54.766Z,1520516694.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:55.163Z,1520516695.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:55.565Z,1520516695.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:55.977Z,1520516695.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:56.364Z,1520516696.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:56.774Z,1520516696.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:57.180Z,1520516697.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:57.566Z,1520516697.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:57.968Z,1520516697.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:58.371Z,1520516698.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:58.769Z,1520516698.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:59.171Z,1520516699.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:59.570Z,1520516699.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:44:59.973Z,1520516699.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:00.367Z,1520516700.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:00.767Z,1520516700.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:01.171Z,1520516701.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:01.573Z,1520516701.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:01.975Z,1520516701.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:02.373Z,1520516702.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:02.773Z,1520516702.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:03.163Z,1520516703.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:03.577Z,1520516703.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:03.978Z,1520516703.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:04.381Z,1520516704.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:04.778Z,1520516704.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:05.160Z,1520516705.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:05.552Z,1520516705.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:05.961Z,1520516705.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:06.364Z,1520516706.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:06.753Z,1520516706.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:07.165Z,1520516707.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:07.563Z,1520516707.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:07.958Z,1520516707.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:08.364Z,1520516708.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:08.764Z,1520516708.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:09.157Z,1520516709.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:09.566Z,1520516709.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:09.964Z,1520516709.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:10.362Z,1520516710.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:10.760Z,1520516710.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:11.165Z,1520516711.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:11.562Z,1520516711.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:11.965Z,1520516711.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:12.370Z,1520516712.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:12.761Z,1520516712.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:13.166Z,1520516713.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:13.565Z,1520516713.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:13.962Z,1520516713.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:14.367Z,1520516714.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:14.774Z,1520516714.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:15.163Z,1520516715.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:15.567Z,1520516715.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:15.996Z,1520516715.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:16.380Z,1520516716.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:16.770Z,1520516716.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:17.167Z,1520516717.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:17.559Z,1520516717.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:17.968Z,1520516717.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:18.370Z,1520516718.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:18.759Z,1520516718.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:19.171Z,1520516719.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:19.570Z,1520516719.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:19.962Z,1520516719.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:20.368Z,1520516720.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:20.765Z,1520516720.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:21.167Z,1520516721.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:21.568Z,1520516721.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:21.967Z,1520516721.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:22.361Z,1520516722.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:22.775Z,1520516722.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:23.170Z,1520516723.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:23.523Z,1520516723.523 [NAL9602](INFO): Powering up NAL9602
2018-03-08T13:45:23.579Z,1520516723.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:23.976Z,1520516723.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:24.417Z,1520516724.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:24.767Z,1520516724.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:25.174Z,1520516725.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:25.566Z,1520516725.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:25.969Z,1520516725.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:26.375Z,1520516726.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:26.768Z,1520516726.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:27.170Z,1520516727.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:27.575Z,1520516727.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:27.967Z,1520516727.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:28.371Z,1520516728.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:28.772Z,1520516728.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:29.170Z,1520516729.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:29.562Z,1520516729.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:29.973Z,1520516729.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:30.373Z,1520516730.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:30.769Z,1520516730.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:31.176Z,1520516731.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:31.574Z,1520516731.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:31.984Z,1520516731.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:32.380Z,1520516732.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:32.780Z,1520516732.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:33.157Z,1520516733.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:33.562Z,1520516733.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:33.983Z,1520516733.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:34.334Z,1520516734.334 [NAL9602](INFO): NAL9602 initialized
2018-03-08T13:45:34.387Z,1520516734.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:34.770Z,1520516734.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:35.172Z,1520516735.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:35.595Z,1520516735.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:35.994Z,1520516735.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:36.375Z,1520516736.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:36.769Z,1520516736.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:37.170Z,1520516737.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:37.573Z,1520516737.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:37.977Z,1520516737.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:38.372Z,1520516738.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:38.774Z,1520516738.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:39.171Z,1520516739.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:39.574Z,1520516739.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:39.968Z,1520516739.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:40.379Z,1520516740.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:40.772Z,1520516740.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:41.203Z,1520516741.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:41.569Z,1520516741.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:41.976Z,1520516741.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:42.380Z,1520516742.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:42.793Z,1520516742.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:43.179Z,1520516743.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:43.571Z,1520516743.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:46.901Z,1520516746.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:47.046Z,1520516747.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:47.411Z,1520516747.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:47.803Z,1520516747.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:48.245Z,1520516748.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:48.642Z,1520516748.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:48.998Z,1520516748.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:49.403Z,1520516749.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:49.834Z,1520516749.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:50.215Z,1520516750.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:50.594Z,1520516750.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:50.999Z,1520516750.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:51.398Z,1520516751.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:51.799Z,1520516751.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:52.195Z,1520516752.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:52.601Z,1520516752.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:53.007Z,1520516753.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:53.415Z,1520516753.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:53.798Z,1520516753.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:54.198Z,1520516754.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:54.597Z,1520516754.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:55.001Z,1520516755.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:55.414Z,1520516755.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:55.814Z,1520516755.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:56.210Z,1520516756.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:56.606Z,1520516756.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:57.006Z,1520516757.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:57.401Z,1520516757.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:57.801Z,1520516757.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:58.213Z,1520516758.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:58.609Z,1520516758.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:59.046Z,1520516759.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:59.421Z,1520516759.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:45:59.803Z,1520516759.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:00.206Z,1520516760.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:00.603Z,1520516760.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:01.006Z,1520516761.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:01.408Z,1520516761.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:01.828Z,1520516761.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:02.214Z,1520516762.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:02.584Z,1520516762.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:03.006Z,1520516763.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:03.417Z,1520516763.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:03.813Z,1520516763.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:04.211Z,1520516764.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:04.619Z,1520516764.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:05.008Z,1520516765.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:05.413Z,1520516765.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:05.817Z,1520516765.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:06.190Z,1520516766.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:06.599Z,1520516766.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:06.992Z,1520516766.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:07.403Z,1520516767.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:07.810Z,1520516767.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:08.242Z,1520516768.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:08.592Z,1520516768.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:08.989Z,1520516768.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:09.393Z,1520516769.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:09.818Z,1520516769.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:10.192Z,1520516770.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:10.592Z,1520516770.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:10.996Z,1520516770.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:11.422Z,1520516771.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:11.791Z,1520516771.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:12.189Z,1520516772.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:12.602Z,1520516772.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:12.994Z,1520516772.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:13.398Z,1520516773.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:13.800Z,1520516773.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:14.208Z,1520516774.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:14.593Z,1520516774.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:15.006Z,1520516775.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:15.395Z,1520516775.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:15.799Z,1520516775.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:16.202Z,1520516776.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:16.609Z,1520516776.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:17.009Z,1520516777.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:17.408Z,1520516777.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:17.803Z,1520516777.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:18.199Z,1520516778.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:18.597Z,1520516778.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:18.997Z,1520516778.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:19.410Z,1520516779.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:19.860Z,1520516779.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:20.223Z,1520516780.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:20.579Z,1520516780.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:21.003Z,1520516781.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:21.387Z,1520516781.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:21.823Z,1520516781.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:22.194Z,1520516782.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:22.600Z,1520516782.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:23.002Z,1520516783.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:23.422Z,1520516783.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:23.794Z,1520516783.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:24.195Z,1520516784.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:24.602Z,1520516784.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:24.995Z,1520516784.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:25.403Z,1520516785.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:25.800Z,1520516785.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:26.229Z,1520516786.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:26.588Z,1520516786.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:27.006Z,1520516787.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:27.398Z,1520516787.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:27.791Z,1520516787.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:28.198Z,1520516788.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:28.644Z,1520516788.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:29.007Z,1520516789.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:29.420Z,1520516789.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:29.810Z,1520516789.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:30.188Z,1520516790.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:30.618Z,1520516790.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:31.019Z,1520516791.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:31.414Z,1520516791.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:31.822Z,1520516791.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:32.218Z,1520516792.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:32.605Z,1520516792.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:33.014Z,1520516793.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:33.386Z,1520516793.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:33.794Z,1520516793.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:34.198Z,1520516794.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:34.604Z,1520516794.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:35.002Z,1520516795.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:35.421Z,1520516795.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:35.794Z,1520516795.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:36.192Z,1520516796.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:36.602Z,1520516796.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:36.995Z,1520516796.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:37.399Z,1520516797.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:37.822Z,1520516797.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:38.197Z,1520516798.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:38.598Z,1520516798.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:39.002Z,1520516799.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:39.399Z,1520516799.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:39.795Z,1520516799.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:40.201Z,1520516800.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:40.655Z,1520516800.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:41.023Z,1520516801.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:41.409Z,1520516801.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:41.807Z,1520516801.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:42.202Z,1520516802.202 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:42.203Z,1520516802.203 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 121
2018-03-08T13:46:42.203Z,1520516802.203 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T13:46:42.204Z,1520516802.204 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:42.205Z,1520516802.205 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 121
2018-03-08T13:46:42.205Z,1520516802.205 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T13:46:42.206Z,1520516802.206 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:42.206Z,1520516802.206 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 121
2018-03-08T13:46:42.206Z,1520516802.206 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T13:46:42.218Z,1520516802.218 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T13:46:42.218Z,1520516802.218 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T13:46:42.219Z,1520516802.219 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T13:46:42.615Z,1520516802.615 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T13:46:42.615Z,1520516802.615 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 121
2018-03-08T13:46:42.616Z,1520516802.616 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T13:46:42.616Z,1520516802.616 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 121
2018-03-08T13:46:42.616Z,1520516802.616 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T13:46:42.616Z,1520516802.616 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 121
2018-03-08T13:46:43.005Z,1520516803.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T13:46:43.006Z,1520516803.006 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:46:43.006Z,1520516803.006 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:46:43.006Z,1520516803.006 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T13:46:43.007Z,1520516803.007 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:46:43.007Z,1520516803.007 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:46:43.007Z,1520516803.007 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T13:46:43.008Z,1520516803.008 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:46:43.008Z,1520516803.008 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:46:43.407Z,1520516803.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T13:46:43.409Z,1520516803.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:43.818Z,1520516803.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T13:46:43.819Z,1520516803.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:47.361Z,1520516807.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T13:46:47.362Z,1520516807.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:47.365Z,1520516807.365 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T13:41:46.0Z
2018-03-08T13:46:47.365Z,1520516807.365 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T13:46:47.365Z,1520516807.365 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T13:46:47.505Z,1520516807.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-08T13:46:47.506Z,1520516807.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:47.894Z,1520516807.894 [DataOverHttps](INFO): Sending 103 bytes from file Logs/20180308T074127/Courier0140.lzma
2018-03-08T13:46:47.934Z,1520516807.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T13:46:47.935Z,1520516807.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:48.238Z,1520516808.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T13:46:48.239Z,1520516808.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:48.595Z,1520516808.595 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0140.lzma.bak
2018-03-08T13:46:48.595Z,1520516808.595 [DataOverHttps](INFO): SBD MOMSN=7986178
2018-03-08T13:46:48.633Z,1520516808.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T13:46:48.633Z,1520516808.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:49.218Z,1520516809.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2018-03-08T13:46:49.219Z,1520516809.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:49.441Z,1520516809.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T13:46:49.442Z,1520516809.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:52.617Z,1520516812.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T13:46:52.618Z,1520516812.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:52.766Z,1520516812.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2018-03-08T13:46:52.767Z,1520516812.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:53.091Z,1520516813.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T13:46:53.092Z,1520516813.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:53.487Z,1520516813.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T13:46:53.488Z,1520516813.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:53.889Z,1520516813.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T13:46:53.890Z,1520516813.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:54.286Z,1520516814.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T13:46:54.287Z,1520516814.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:54.688Z,1520516814.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T13:46:54.690Z,1520516814.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:58.473Z,1520516818.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2018-03-08T13:46:58.473Z,1520516818.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:58.616Z,1520516818.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T13:46:58.617Z,1520516818.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:58.913Z,1520516818.913 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0141.lzma
2018-03-08T13:46:58.969Z,1520516818.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2018-03-08T13:46:58.970Z,1520516818.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:59.342Z,1520516819.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2018-03-08T13:46:59.343Z,1520516819.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:46:59.715Z,1520516819.715 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0141.lzma.bak
2018-03-08T13:46:59.715Z,1520516819.715 [DataOverHttps](INFO): SBD MOMSN=7986182
2018-03-08T13:46:59.769Z,1520516819.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T13:46:59.770Z,1520516819.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:00.328Z,1520516820.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-08T13:47:00.329Z,1520516820.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:00.332Z,1520516820.332 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T13:47:00.332Z,1520516820.332 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T13:47:00.332Z,1520516820.332 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T13:47:00.586Z,1520516820.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T13:47:00.587Z,1520516820.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:03.885Z,1520516823.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:04.034Z,1520516824.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:04.360Z,1520516824.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:04.809Z,1520516824.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:05.167Z,1520516825.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:05.564Z,1520516825.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:05.965Z,1520516825.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:06.368Z,1520516826.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:06.756Z,1520516826.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:07.162Z,1520516827.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:07.559Z,1520516827.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:07.959Z,1520516827.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:08.373Z,1520516828.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:08.776Z,1520516828.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:09.164Z,1520516829.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:09.559Z,1520516829.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:09.955Z,1520516829.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:10.378Z,1520516830.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:10.851Z,1520516830.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:11.164Z,1520516831.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:11.551Z,1520516831.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:11.950Z,1520516831.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:12.359Z,1520516832.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:12.763Z,1520516832.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:13.174Z,1520516833.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:13.596Z,1520516833.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:13.947Z,1520516833.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:14.360Z,1520516834.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:14.773Z,1520516834.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:15.174Z,1520516835.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:15.574Z,1520516835.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:15.964Z,1520516835.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:16.368Z,1520516836.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:16.783Z,1520516836.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:17.211Z,1520516837.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:17.564Z,1520516837.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:17.966Z,1520516837.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:18.374Z,1520516838.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:18.782Z,1520516838.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:19.174Z,1520516839.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:19.559Z,1520516839.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:19.973Z,1520516839.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:20.374Z,1520516840.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:20.770Z,1520516840.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:21.178Z,1520516841.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:21.568Z,1520516841.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:21.943Z,1520516841.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:22.374Z,1520516842.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:22.778Z,1520516842.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:23.178Z,1520516843.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:23.570Z,1520516843.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:23.951Z,1520516843.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:24.371Z,1520516844.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:24.771Z,1520516844.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:25.175Z,1520516845.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:25.551Z,1520516845.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:25.970Z,1520516845.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:26.385Z,1520516846.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:26.762Z,1520516846.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:27.164Z,1520516847.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:27.562Z,1520516847.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:27.955Z,1520516847.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:28.368Z,1520516848.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:28.764Z,1520516848.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:29.186Z,1520516849.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:29.555Z,1520516849.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:29.959Z,1520516849.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:30.360Z,1520516850.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:30.764Z,1520516850.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:31.161Z,1520516851.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:31.559Z,1520516851.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:31.997Z,1520516851.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:32.393Z,1520516852.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:32.817Z,1520516852.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:33.230Z,1520516853.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:33.547Z,1520516853.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:33.983Z,1520516853.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:34.398Z,1520516854.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:34.759Z,1520516854.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:35.161Z,1520516855.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:35.560Z,1520516855.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:35.987Z,1520516855.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:36.391Z,1520516856.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:36.757Z,1520516856.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:37.153Z,1520516857.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:37.557Z,1520516857.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:37.954Z,1520516857.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:38.361Z,1520516858.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:38.765Z,1520516858.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:39.161Z,1520516859.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:39.559Z,1520516859.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:39.958Z,1520516859.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:40.385Z,1520516860.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:40.770Z,1520516860.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:41.167Z,1520516861.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:41.554Z,1520516861.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:41.953Z,1520516861.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:42.360Z,1520516862.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:42.766Z,1520516862.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:43.163Z,1520516863.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:43.558Z,1520516863.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:43.967Z,1520516863.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:44.366Z,1520516864.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:44.773Z,1520516864.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:45.186Z,1520516865.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:45.558Z,1520516865.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:45.950Z,1520516865.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:46.380Z,1520516866.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:46.764Z,1520516866.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:47.162Z,1520516867.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:47.551Z,1520516867.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:47.955Z,1520516867.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:48.353Z,1520516868.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:48.781Z,1520516868.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:49.186Z,1520516869.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:49.556Z,1520516869.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:49.951Z,1520516869.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:50.356Z,1520516870.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:50.831Z,1520516870.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:51.163Z,1520516871.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:51.555Z,1520516871.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:51.959Z,1520516871.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:52.385Z,1520516872.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:52.759Z,1520516872.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:53.162Z,1520516873.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:53.566Z,1520516873.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:53.950Z,1520516873.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:54.412Z,1520516874.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:54.760Z,1520516874.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:55.166Z,1520516875.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:55.584Z,1520516875.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:55.976Z,1520516875.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:56.386Z,1520516876.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:56.790Z,1520516876.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:57.166Z,1520516877.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:57.558Z,1520516877.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:57.962Z,1520516877.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:58.367Z,1520516878.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:58.763Z,1520516878.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:59.166Z,1520516879.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:59.558Z,1520516879.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:47:59.987Z,1520516879.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:00.366Z,1520516880.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:00.767Z,1520516880.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:04.676Z,1520516884.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:04.795Z,1520516884.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:05.149Z,1520516885.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:05.549Z,1520516885.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:05.962Z,1520516885.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:06.361Z,1520516886.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:06.770Z,1520516886.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:07.152Z,1520516887.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:07.547Z,1520516887.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:07.949Z,1520516887.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:08.370Z,1520516888.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:08.760Z,1520516888.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:09.156Z,1520516889.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:09.550Z,1520516889.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:09.969Z,1520516889.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:10.366Z,1520516890.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:10.766Z,1520516890.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:11.170Z,1520516891.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:11.559Z,1520516891.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:11.936Z,1520516891.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:12.358Z,1520516892.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:12.800Z,1520516892.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:13.175Z,1520516893.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:13.559Z,1520516893.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:13.962Z,1520516893.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:14.363Z,1520516894.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:14.770Z,1520516894.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:15.167Z,1520516895.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:15.557Z,1520516895.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:15.939Z,1520516895.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:16.369Z,1520516896.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:16.744Z,1520516896.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:17.164Z,1520516897.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:17.546Z,1520516897.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:17.942Z,1520516897.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:18.352Z,1520516898.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:18.782Z,1520516898.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:19.154Z,1520516899.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:19.585Z,1520516899.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:19.959Z,1520516899.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:20.362Z,1520516900.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:20.759Z,1520516900.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:21.158Z,1520516901.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:21.556Z,1520516901.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:21.957Z,1520516901.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:22.366Z,1520516902.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:22.755Z,1520516902.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:23.163Z,1520516903.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:23.558Z,1520516903.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:23.931Z,1520516903.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:24.359Z,1520516904.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:24.765Z,1520516904.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:25.167Z,1520516905.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:25.558Z,1520516905.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:25.942Z,1520516905.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:26.362Z,1520516906.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:26.778Z,1520516906.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:27.170Z,1520516907.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:27.537Z,1520516907.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:27.965Z,1520516907.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:28.368Z,1520516908.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:28.744Z,1520516908.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:29.164Z,1520516909.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:29.547Z,1520516909.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:29.942Z,1520516909.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:30.366Z,1520516910.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:30.768Z,1520516910.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:31.163Z,1520516911.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:31.547Z,1520516911.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:31.987Z,1520516911.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:32.376Z,1520516912.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:32.772Z,1520516912.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:33.148Z,1520516913.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:33.547Z,1520516913.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:33.945Z,1520516913.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:34.376Z,1520516914.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:34.748Z,1520516914.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:35.174Z,1520516915.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:35.546Z,1520516915.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:35.943Z,1520516915.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:36.374Z,1520516916.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:36.779Z,1520516916.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:37.148Z,1520516917.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:37.545Z,1520516917.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:37.947Z,1520516917.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:38.351Z,1520516918.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:38.752Z,1520516918.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:39.153Z,1520516919.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:39.547Z,1520516919.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:39.945Z,1520516919.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:40.359Z,1520516920.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:40.756Z,1520516920.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:41.152Z,1520516921.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:41.589Z,1520516921.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:41.949Z,1520516921.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:42.362Z,1520516922.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:42.759Z,1520516922.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:43.160Z,1520516923.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:43.548Z,1520516923.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:43.951Z,1520516923.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:44.355Z,1520516924.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:44.763Z,1520516924.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:45.167Z,1520516925.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:45.551Z,1520516925.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:45.949Z,1520516925.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:46.357Z,1520516926.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:46.756Z,1520516926.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:47.156Z,1520516927.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:47.552Z,1520516927.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:47.949Z,1520516927.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:48.356Z,1520516928.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:48.791Z,1520516928.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:49.174Z,1520516929.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:49.555Z,1520516929.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:49.959Z,1520516929.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:50.363Z,1520516930.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:50.768Z,1520516930.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:51.169Z,1520516931.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:51.547Z,1520516931.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:51.951Z,1520516931.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:52.369Z,1520516932.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:52.773Z,1520516932.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:53.176Z,1520516933.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:53.552Z,1520516933.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:53.942Z,1520516933.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:54.374Z,1520516934.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:54.775Z,1520516934.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:55.156Z,1520516935.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:55.547Z,1520516935.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:55.946Z,1520516935.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:56.360Z,1520516936.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:56.756Z,1520516936.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:57.158Z,1520516937.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:57.550Z,1520516937.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:57.949Z,1520516937.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:58.352Z,1520516938.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:58.756Z,1520516938.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:59.154Z,1520516939.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:59.550Z,1520516939.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:48:59.949Z,1520516939.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:00.357Z,1520516940.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:00.755Z,1520516940.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:01.158Z,1520516941.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:04.663Z,1520516944.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:04.790Z,1520516944.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:05.191Z,1520516945.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:05.591Z,1520516945.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:05.990Z,1520516945.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:06.382Z,1520516946.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:06.775Z,1520516946.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:07.171Z,1520516947.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:07.578Z,1520516947.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:07.981Z,1520516947.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:08.381Z,1520516948.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:08.773Z,1520516948.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:09.178Z,1520516949.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:09.572Z,1520516949.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:09.974Z,1520516949.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:10.378Z,1520516950.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:10.781Z,1520516950.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:11.189Z,1520516951.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:11.573Z,1520516951.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:11.974Z,1520516951.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:12.376Z,1520516952.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:12.780Z,1520516952.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:13.181Z,1520516953.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:13.572Z,1520516953.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:13.975Z,1520516953.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:14.381Z,1520516954.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:14.780Z,1520516954.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:15.177Z,1520516955.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:15.571Z,1520516955.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:15.973Z,1520516955.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:16.377Z,1520516956.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:16.784Z,1520516956.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:17.176Z,1520516957.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:17.573Z,1520516957.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:17.975Z,1520516957.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:18.376Z,1520516958.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:18.780Z,1520516958.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:19.176Z,1520516959.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:19.575Z,1520516959.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:19.995Z,1520516959.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:20.402Z,1520516960.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:20.778Z,1520516960.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:21.174Z,1520516961.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:21.564Z,1520516961.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:21.974Z,1520516961.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:22.380Z,1520516962.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:22.801Z,1520516962.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:23.199Z,1520516963.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:23.567Z,1520516963.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:23.966Z,1520516963.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:24.402Z,1520516964.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:24.772Z,1520516964.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:25.168Z,1520516965.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:25.567Z,1520516965.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:25.979Z,1520516965.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:26.379Z,1520516966.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:26.783Z,1520516966.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:27.182Z,1520516967.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:27.571Z,1520516967.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:27.970Z,1520516967.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:28.377Z,1520516968.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:28.775Z,1520516968.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:29.176Z,1520516969.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:29.572Z,1520516969.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:29.965Z,1520516969.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:30.376Z,1520516970.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:30.776Z,1520516970.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:31.176Z,1520516971.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:31.571Z,1520516971.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:31.978Z,1520516971.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:32.386Z,1520516972.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:32.779Z,1520516972.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:33.238Z,1520516973.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:33.570Z,1520516973.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:33.980Z,1520516973.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:34.433Z,1520516974.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:34.767Z,1520516974.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:35.177Z,1520516975.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:35.616Z,1520516975.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:35.973Z,1520516975.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:36.383Z,1520516976.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:36.781Z,1520516976.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:37.178Z,1520516977.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:37.574Z,1520516977.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:37.985Z,1520516977.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:38.386Z,1520516978.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:38.786Z,1520516978.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:39.180Z,1520516979.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:39.578Z,1520516979.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:39.962Z,1520516979.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:40.389Z,1520516980.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:40.768Z,1520516980.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:41.207Z,1520516981.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:41.565Z,1520516981.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:41.971Z,1520516981.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:42.372Z,1520516982.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:42.774Z,1520516982.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:43.171Z,1520516983.171 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:43.171Z,1520516983.171 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 122
2018-03-08T13:49:43.171Z,1520516983.171 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T13:49:43.177Z,1520516983.177 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:43.177Z,1520516983.177 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 122
2018-03-08T13:49:43.177Z,1520516983.177 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T13:49:43.179Z,1520516983.179 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:43.179Z,1520516983.179 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 122
2018-03-08T13:49:43.179Z,1520516983.179 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T13:49:43.195Z,1520516983.195 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T13:49:43.195Z,1520516983.195 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T13:49:43.196Z,1520516983.196 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T13:49:43.617Z,1520516983.617 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T13:49:43.617Z,1520516983.617 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 122
2018-03-08T13:49:43.617Z,1520516983.617 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T13:49:43.618Z,1520516983.618 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 122
2018-03-08T13:49:43.618Z,1520516983.618 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T13:49:43.618Z,1520516983.618 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 122
2018-03-08T13:49:43.968Z,1520516983.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T13:49:43.969Z,1520516983.969 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:49:43.970Z,1520516983.970 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:49:43.970Z,1520516983.970 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T13:49:43.971Z,1520516983.971 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:49:43.971Z,1520516983.971 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:49:43.971Z,1520516983.971 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T13:49:43.972Z,1520516983.972 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:49:43.972Z,1520516983.972 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:49:44.376Z,1520516984.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T13:49:44.377Z,1520516984.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:44.780Z,1520516984.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T13:49:44.781Z,1520516984.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:45.186Z,1520516985.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T13:49:45.187Z,1520516985.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:45.570Z,1520516985.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T13:49:45.571Z,1520516985.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:45.973Z,1520516985.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T13:49:45.974Z,1520516985.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:46.386Z,1520516986.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T13:49:46.387Z,1520516986.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:46.777Z,1520516986.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T13:49:46.778Z,1520516986.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:47.190Z,1520516987.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T13:49:47.191Z,1520516987.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:47.613Z,1520516987.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T13:49:47.614Z,1520516987.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:47.966Z,1520516987.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T13:49:47.967Z,1520516987.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:48.378Z,1520516988.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T13:49:48.379Z,1520516988.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:48.780Z,1520516988.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T13:49:48.781Z,1520516988.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:49.176Z,1520516989.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T13:49:49.177Z,1520516989.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:49.574Z,1520516989.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T13:49:49.575Z,1520516989.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:49.974Z,1520516989.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T13:49:49.975Z,1520516989.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:50.376Z,1520516990.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T13:49:50.377Z,1520516990.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:50.787Z,1520516990.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T13:49:50.788Z,1520516990.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:51.194Z,1520516991.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T13:49:51.195Z,1520516991.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:51.568Z,1520516991.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T13:49:51.569Z,1520516991.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:51.972Z,1520516991.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T13:49:51.973Z,1520516991.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:52.376Z,1520516992.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T13:49:52.377Z,1520516992.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:52.776Z,1520516992.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T13:49:52.777Z,1520516992.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:53.176Z,1520516993.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T13:49:53.181Z,1520516993.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:53.577Z,1520516993.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T13:49:53.578Z,1520516993.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:53.980Z,1520516993.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T13:49:53.981Z,1520516993.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:54.386Z,1520516994.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T13:49:54.387Z,1520516994.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:54.786Z,1520516994.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T13:49:54.787Z,1520516994.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:55.175Z,1520516995.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T13:49:55.176Z,1520516995.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:55.575Z,1520516995.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T13:49:55.576Z,1520516995.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:55.974Z,1520516995.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T13:49:55.975Z,1520516995.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:56.376Z,1520516996.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T13:49:56.377Z,1520516996.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:56.781Z,1520516996.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T13:49:56.781Z,1520516996.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:57.182Z,1520516997.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T13:49:57.183Z,1520516997.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:57.571Z,1520516997.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T13:49:57.572Z,1520516997.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:57.973Z,1520516997.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T13:49:57.977Z,1520516997.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:58.381Z,1520516998.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T13:49:58.382Z,1520516998.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:58.784Z,1520516998.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T13:49:58.785Z,1520516998.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:59.180Z,1520516999.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T13:49:59.181Z,1520516999.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:59.580Z,1520516999.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T13:49:59.581Z,1520516999.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:49:59.955Z,1520516999.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T13:49:59.956Z,1520516999.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:00.378Z,1520517000.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T13:50:00.379Z,1520517000.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:00.786Z,1520517000.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T13:50:00.787Z,1520517000.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:01.173Z,1520517001.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T13:50:01.174Z,1520517001.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:05.629Z,1520517005.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:05.760Z,1520517005.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:06.137Z,1520517006.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:06.555Z,1520517006.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:06.945Z,1520517006.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:07.319Z,1520517007.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:07.716Z,1520517007.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:08.118Z,1520517008.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:08.523Z,1520517008.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:08.930Z,1520517008.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:09.321Z,1520517009.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:09.712Z,1520517009.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:10.126Z,1520517010.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:10.521Z,1520517010.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:10.917Z,1520517010.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:11.304Z,1520517011.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:11.727Z,1520517011.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:12.123Z,1520517012.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:12.530Z,1520517012.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:12.901Z,1520517012.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:13.334Z,1520517013.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:13.708Z,1520517013.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:14.134Z,1520517014.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:14.529Z,1520517014.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:14.931Z,1520517014.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:15.335Z,1520517015.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:15.711Z,1520517015.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:16.111Z,1520517016.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:16.534Z,1520517016.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:16.930Z,1520517016.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:17.339Z,1520517017.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:17.717Z,1520517017.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:18.157Z,1520517018.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:18.518Z,1520517018.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:18.923Z,1520517018.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:19.313Z,1520517019.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:19.783Z,1520517019.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:20.152Z,1520517020.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:20.527Z,1520517020.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:20.930Z,1520517020.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:21.323Z,1520517021.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:21.722Z,1520517021.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:22.120Z,1520517022.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:22.507Z,1520517022.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:22.935Z,1520517022.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:23.335Z,1520517023.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:23.719Z,1520517023.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:24.126Z,1520517024.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:24.525Z,1520517024.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:24.916Z,1520517024.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:25.317Z,1520517025.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:25.729Z,1520517025.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:26.135Z,1520517026.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:26.540Z,1520517026.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:26.925Z,1520517026.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:27.316Z,1520517027.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:27.726Z,1520517027.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:28.127Z,1520517028.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:28.513Z,1520517028.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:28.915Z,1520517028.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:29.317Z,1520517029.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:29.725Z,1520517029.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:30.123Z,1520517030.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:30.531Z,1520517030.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:30.935Z,1520517030.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:31.335Z,1520517031.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:31.713Z,1520517031.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:32.112Z,1520517032.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:32.521Z,1520517032.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:32.920Z,1520517032.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:33.322Z,1520517033.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:33.712Z,1520517033.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:34.123Z,1520517034.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:34.554Z,1520517034.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:34.914Z,1520517034.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:35.317Z,1520517035.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:35.725Z,1520517035.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:36.130Z,1520517036.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:36.524Z,1520517036.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:36.914Z,1520517036.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:37.321Z,1520517037.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:37.719Z,1520517037.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:38.117Z,1520517038.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:38.522Z,1520517038.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:38.934Z,1520517038.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:39.325Z,1520517039.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:39.717Z,1520517039.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:40.123Z,1520517040.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:40.526Z,1520517040.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:40.919Z,1520517040.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:41.301Z,1520517041.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:41.719Z,1520517041.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:42.125Z,1520517042.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:42.526Z,1520517042.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:42.903Z,1520517042.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:43.304Z,1520517043.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:43.731Z,1520517043.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:44.103Z,1520517044.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:44.530Z,1520517044.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:44.912Z,1520517044.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:45.328Z,1520517045.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:45.732Z,1520517045.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:46.111Z,1520517046.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:46.514Z,1520517046.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:46.933Z,1520517046.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:47.319Z,1520517047.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:47.718Z,1520517047.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:48.139Z,1520517048.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:48.532Z,1520517048.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:48.938Z,1520517048.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:49.309Z,1520517049.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:49.711Z,1520517049.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:50.130Z,1520517050.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:50.535Z,1520517050.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:50.918Z,1520517050.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:51.312Z,1520517051.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:51.733Z,1520517051.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:52.119Z,1520517052.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:52.510Z,1520517052.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:52.911Z,1520517052.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:53.315Z,1520517053.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:53.735Z,1520517053.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:54.118Z,1520517054.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:54.540Z,1520517054.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:54.930Z,1520517054.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:55.330Z,1520517055.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:55.713Z,1520517055.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:56.115Z,1520517056.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:56.517Z,1520517056.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:56.919Z,1520517056.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:57.315Z,1520517057.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:57.712Z,1520517057.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:58.134Z,1520517058.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:58.529Z,1520517058.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:58.911Z,1520517058.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:59.311Z,1520517059.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:50:59.735Z,1520517059.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:00.139Z,1520517060.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:00.519Z,1520517060.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:00.916Z,1520517060.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:01.335Z,1520517061.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:04.435Z,1520517064.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:04.571Z,1520517064.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:04.922Z,1520517064.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:05.326Z,1520517065.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:05.726Z,1520517065.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:06.126Z,1520517066.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:06.523Z,1520517066.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:06.905Z,1520517066.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:07.307Z,1520517067.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:07.719Z,1520517067.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:08.119Z,1520517068.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:08.526Z,1520517068.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:08.913Z,1520517068.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:09.322Z,1520517069.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:09.713Z,1520517069.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:10.115Z,1520517070.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:10.517Z,1520517070.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:10.927Z,1520517070.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:11.324Z,1520517071.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:11.710Z,1520517071.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:12.109Z,1520517072.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:12.512Z,1520517072.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:12.911Z,1520517072.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:13.322Z,1520517073.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:13.720Z,1520517073.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:14.155Z,1520517074.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:14.522Z,1520517074.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:14.915Z,1520517074.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:15.307Z,1520517075.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:15.727Z,1520517075.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:16.154Z,1520517076.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:16.527Z,1520517076.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:16.920Z,1520517076.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:17.323Z,1520517077.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:17.713Z,1520517077.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:18.125Z,1520517078.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:18.508Z,1520517078.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:18.919Z,1520517078.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:19.315Z,1520517079.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:19.723Z,1520517079.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:20.125Z,1520517080.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:20.526Z,1520517080.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:20.918Z,1520517080.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:21.307Z,1520517081.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:21.717Z,1520517081.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:22.122Z,1520517082.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:22.550Z,1520517082.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:22.920Z,1520517082.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:23.328Z,1520517083.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:23.754Z,1520517083.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:24.117Z,1520517084.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:24.514Z,1520517084.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:24.909Z,1520517084.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:25.322Z,1520517085.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:25.731Z,1520517085.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:26.123Z,1520517086.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:26.524Z,1520517086.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:26.923Z,1520517086.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:27.322Z,1520517087.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:27.730Z,1520517087.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:28.113Z,1520517088.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:28.523Z,1520517088.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:28.924Z,1520517088.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:29.324Z,1520517089.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:29.724Z,1520517089.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:30.126Z,1520517090.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:30.527Z,1520517090.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:30.913Z,1520517090.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:31.318Z,1520517091.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:31.727Z,1520517091.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:32.150Z,1520517092.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:32.519Z,1520517092.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:32.913Z,1520517092.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:33.323Z,1520517093.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:33.716Z,1520517093.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:34.113Z,1520517094.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:34.524Z,1520517094.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:34.924Z,1520517094.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:35.326Z,1520517095.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:35.714Z,1520517095.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:36.130Z,1520517096.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:36.522Z,1520517096.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:36.920Z,1520517096.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:37.314Z,1520517097.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:37.723Z,1520517097.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:38.131Z,1520517098.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:38.520Z,1520517098.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:38.915Z,1520517098.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:39.318Z,1520517099.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:39.717Z,1520517099.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:40.114Z,1520517100.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:40.524Z,1520517100.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:40.921Z,1520517100.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:41.323Z,1520517101.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:41.712Z,1520517101.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:42.117Z,1520517102.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:42.517Z,1520517102.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:42.930Z,1520517102.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:43.320Z,1520517103.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:43.728Z,1520517103.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:44.120Z,1520517104.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:44.536Z,1520517104.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:44.931Z,1520517104.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:45.305Z,1520517105.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:45.725Z,1520517105.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:46.131Z,1520517106.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:46.509Z,1520517106.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:46.931Z,1520517106.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:47.328Z,1520517107.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:47.723Z,1520517107.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:48.110Z,1520517108.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:48.510Z,1520517108.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:48.902Z,1520517108.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:48.932Z,1520517108.932 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T13:51:49.333Z,1520517109.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:49.738Z,1520517109.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:50.137Z,1520517110.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:50.518Z,1520517110.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:50.919Z,1520517110.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:51.311Z,1520517111.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:51.715Z,1520517111.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:52.120Z,1520517112.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:52.519Z,1520517112.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:52.957Z,1520517112.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:53.338Z,1520517113.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:53.713Z,1520517113.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:54.130Z,1520517114.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:54.523Z,1520517114.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:54.900Z,1520517114.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:55.321Z,1520517115.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:55.727Z,1520517115.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:56.146Z,1520517116.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:56.525Z,1520517116.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:56.907Z,1520517116.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:57.317Z,1520517117.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:57.708Z,1520517117.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:58.176Z,1520517118.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:58.509Z,1520517118.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:58.928Z,1520517118.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:59.328Z,1520517119.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:51:59.743Z,1520517119.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:00.118Z,1520517120.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:00.518Z,1520517120.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:00.955Z,1520517120.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:00.958Z,1520517120.958 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T13:52:00.958Z,1520517120.958 [Default:CheckIn:C.Wait] Stopped
2018-03-08T13:52:00.958Z,1520517120.958 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T13:52:00.958Z,1520517120.958 [Default:CheckIn:D] Running Loop=1
2018-03-08T13:52:01.316Z,1520517121.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:01.324Z,1520517121.324 [Default:CheckIn:D] Stopped
2018-03-08T13:52:01.324Z,1520517121.324 [Default:CheckIn:E] Running Loop=1
2018-03-08T13:52:04.490Z,1520517124.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:04.493Z,1520517124.493 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 366.275293 min 
2018-03-08T13:52:04.493Z,1520517124.493 [Default:CheckIn:E] Stopped
2018-03-08T13:52:04.493Z,1520517124.493 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T13:52:04.493Z,1520517124.493 [Default:CheckIn] Stopped
2018-03-08T13:52:04.493Z,1520517124.493 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T13:52:04.494Z,1520517124.494 [Default:CheckIn](INFO): Running loop #36
2018-03-08T13:52:04.494Z,1520517124.494 [Default:CheckIn] Running Loop=36
2018-03-08T13:52:04.494Z,1520517124.494 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T13:52:04.494Z,1520517124.494 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T13:52:04.629Z,1520517124.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:05.024Z,1520517125.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:05.429Z,1520517125.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:05.803Z,1520517125.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:06.206Z,1520517126.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:06.630Z,1520517126.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:07.005Z,1520517127.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:07.432Z,1520517127.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:07.833Z,1520517127.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:08.210Z,1520517128.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:08.603Z,1520517128.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:09.037Z,1520517129.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:09.418Z,1520517129.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:09.816Z,1520517129.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:10.218Z,1520517130.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:10.600Z,1520517130.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:11.005Z,1520517131.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:11.406Z,1520517131.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:11.803Z,1520517131.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:12.207Z,1520517132.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:12.619Z,1520517132.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:13.018Z,1520517133.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:13.420Z,1520517133.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:13.810Z,1520517133.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:14.208Z,1520517134.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:14.608Z,1520517134.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:15.008Z,1520517135.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:15.415Z,1520517135.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:15.827Z,1520517135.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:16.226Z,1520517136.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:16.604Z,1520517136.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:17.015Z,1520517137.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:17.411Z,1520517137.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:17.804Z,1520517137.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:18.219Z,1520517138.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:18.617Z,1520517138.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:19.022Z,1520517139.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:19.417Z,1520517139.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:19.818Z,1520517139.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:20.224Z,1520517140.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:20.605Z,1520517140.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:21.028Z,1520517141.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:21.440Z,1520517141.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:21.822Z,1520517141.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:22.217Z,1520517142.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:22.615Z,1520517142.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:23.014Z,1520517143.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:23.407Z,1520517143.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:23.847Z,1520517143.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:24.243Z,1520517144.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:24.621Z,1520517144.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:25.030Z,1520517145.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:25.420Z,1520517145.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:25.812Z,1520517145.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:26.213Z,1520517146.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:26.613Z,1520517146.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:27.015Z,1520517147.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:27.417Z,1520517147.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:27.827Z,1520517147.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:28.218Z,1520517148.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:28.607Z,1520517148.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:29.016Z,1520517149.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:29.410Z,1520517149.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:29.810Z,1520517149.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:30.214Z,1520517150.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:30.616Z,1520517150.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:31.019Z,1520517151.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:31.427Z,1520517151.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:31.809Z,1520517151.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:32.213Z,1520517152.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:32.610Z,1520517152.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:33.057Z,1520517153.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:33.417Z,1520517153.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:33.821Z,1520517153.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:34.218Z,1520517154.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:34.614Z,1520517154.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:35.057Z,1520517155.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:35.418Z,1520517155.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:35.811Z,1520517155.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:36.229Z,1520517156.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:36.621Z,1520517156.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:37.030Z,1520517157.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:37.430Z,1520517157.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:37.828Z,1520517157.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:38.215Z,1520517158.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:38.614Z,1520517158.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:39.007Z,1520517159.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:39.408Z,1520517159.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:39.820Z,1520517159.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:40.212Z,1520517160.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:40.610Z,1520517160.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:41.011Z,1520517161.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:41.409Z,1520517161.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:41.810Z,1520517161.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:42.239Z,1520517162.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:42.612Z,1520517162.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:43.017Z,1520517163.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:43.413Z,1520517163.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:43.810Z,1520517163.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:44.211Z,1520517164.211 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:44.211Z,1520517164.211 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 123
2018-03-08T13:52:44.211Z,1520517164.211 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T13:52:44.213Z,1520517164.213 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:44.213Z,1520517164.213 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 123
2018-03-08T13:52:44.213Z,1520517164.213 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T13:52:44.214Z,1520517164.214 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:44.215Z,1520517164.215 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 123
2018-03-08T13:52:44.215Z,1520517164.215 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T13:52:44.234Z,1520517164.234 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T13:52:44.235Z,1520517164.235 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T13:52:44.235Z,1520517164.235 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T13:52:44.657Z,1520517164.657 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T13:52:44.657Z,1520517164.657 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 123
2018-03-08T13:52:44.657Z,1520517164.657 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T13:52:44.658Z,1520517164.658 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 123
2018-03-08T13:52:44.658Z,1520517164.658 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T13:52:44.658Z,1520517164.658 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 123
2018-03-08T13:52:45.005Z,1520517165.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T13:52:45.005Z,1520517165.005 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:52:45.006Z,1520517165.006 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:52:45.006Z,1520517165.006 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T13:52:45.006Z,1520517165.006 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:52:45.007Z,1520517165.007 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:52:45.007Z,1520517165.007 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T13:52:45.007Z,1520517165.007 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:52:45.008Z,1520517165.008 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:52:45.416Z,1520517165.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T13:52:45.417Z,1520517165.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:45.832Z,1520517165.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T13:52:45.833Z,1520517165.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:46.213Z,1520517166.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T13:52:46.213Z,1520517166.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:46.615Z,1520517166.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T13:52:46.615Z,1520517166.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:47.010Z,1520517167.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T13:52:47.011Z,1520517167.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:47.408Z,1520517167.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T13:52:47.409Z,1520517167.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:47.812Z,1520517167.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T13:52:47.813Z,1520517167.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:48.210Z,1520517168.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T13:52:48.211Z,1520517168.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:48.615Z,1520517168.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T13:52:48.616Z,1520517168.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:49.023Z,1520517169.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T13:52:49.024Z,1520517169.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:49.419Z,1520517169.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T13:52:49.420Z,1520517169.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:49.811Z,1520517169.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T13:52:49.812Z,1520517169.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:50.239Z,1520517170.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T13:52:50.240Z,1520517170.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:50.611Z,1520517170.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T13:52:50.612Z,1520517170.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:51.016Z,1520517171.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T13:52:51.017Z,1520517171.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:51.420Z,1520517171.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T13:52:51.421Z,1520517171.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:51.823Z,1520517171.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T13:52:51.824Z,1520517171.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:52.215Z,1520517172.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T13:52:52.216Z,1520517172.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:52.619Z,1520517172.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T13:52:52.620Z,1520517172.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:53.020Z,1520517173.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T13:52:53.021Z,1520517173.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:53.476Z,1520517173.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-08T13:52:53.477Z,1520517173.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:53.804Z,1520517173.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T13:52:53.838Z,1520517173.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:54.211Z,1520517174.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T13:52:54.237Z,1520517174.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:54.631Z,1520517174.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T13:52:54.632Z,1520517174.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:55.029Z,1520517175.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T13:52:55.030Z,1520517175.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:55.429Z,1520517175.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T13:52:55.430Z,1520517175.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:55.816Z,1520517175.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T13:52:55.817Z,1520517175.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:56.210Z,1520517176.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T13:52:56.211Z,1520517176.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:56.614Z,1520517176.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T13:52:56.615Z,1520517176.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:57.010Z,1520517177.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T13:52:57.011Z,1520517177.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:57.411Z,1520517177.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T13:52:57.413Z,1520517177.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:57.812Z,1520517177.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T13:52:57.813Z,1520517177.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:58.222Z,1520517178.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T13:52:58.222Z,1520517178.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:58.614Z,1520517178.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T13:52:58.615Z,1520517178.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:59.014Z,1520517179.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T13:52:59.015Z,1520517179.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:59.411Z,1520517179.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T13:52:59.411Z,1520517179.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:52:59.810Z,1520517179.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T13:52:59.811Z,1520517179.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:00.211Z,1520517180.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T13:53:00.212Z,1520517180.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:00.622Z,1520517180.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T13:53:00.623Z,1520517180.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:01.139Z,1520517181.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T13:53:01.140Z,1520517181.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:01.423Z,1520517181.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T13:53:01.424Z,1520517181.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:04.628Z,1520517184.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:04.791Z,1520517184.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:05.156Z,1520517185.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:05.622Z,1520517185.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:05.959Z,1520517185.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:06.347Z,1520517186.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:06.780Z,1520517186.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:07.144Z,1520517187.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:07.547Z,1520517187.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:07.952Z,1520517187.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:08.348Z,1520517188.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:08.746Z,1520517188.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:09.142Z,1520517189.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:09.550Z,1520517189.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:09.944Z,1520517189.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:10.374Z,1520517190.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:10.752Z,1520517190.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:11.148Z,1520517191.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:11.546Z,1520517191.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:11.945Z,1520517191.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:12.347Z,1520517192.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:12.752Z,1520517192.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:13.148Z,1520517193.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:13.545Z,1520517193.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:13.946Z,1520517193.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:14.387Z,1520517194.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:14.790Z,1520517194.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:15.156Z,1520517195.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:15.547Z,1520517195.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:15.943Z,1520517195.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:16.366Z,1520517196.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:16.755Z,1520517196.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:17.162Z,1520517197.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:17.562Z,1520517197.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:17.939Z,1520517197.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:18.353Z,1520517198.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:18.757Z,1520517198.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:19.157Z,1520517199.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:19.547Z,1520517199.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:19.950Z,1520517199.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:20.356Z,1520517200.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:20.757Z,1520517200.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:21.156Z,1520517201.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:21.546Z,1520517201.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:21.943Z,1520517201.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:22.352Z,1520517202.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:22.751Z,1520517202.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:23.152Z,1520517203.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:23.542Z,1520517203.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:23.946Z,1520517203.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:24.355Z,1520517204.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:24.752Z,1520517204.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:25.155Z,1520517205.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:25.544Z,1520517205.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:25.950Z,1520517205.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:26.355Z,1520517206.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:26.754Z,1520517206.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:27.155Z,1520517207.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:27.550Z,1520517207.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:27.944Z,1520517207.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:28.352Z,1520517208.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:28.751Z,1520517208.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:29.151Z,1520517209.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:29.543Z,1520517209.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:29.945Z,1520517209.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:30.351Z,1520517210.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:30.754Z,1520517210.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:31.155Z,1520517211.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:31.542Z,1520517211.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:31.953Z,1520517211.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:32.353Z,1520517212.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:32.766Z,1520517212.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:33.156Z,1520517213.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:33.547Z,1520517213.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:33.964Z,1520517213.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:34.362Z,1520517214.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:34.751Z,1520517214.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:35.162Z,1520517215.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:35.547Z,1520517215.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:35.943Z,1520517215.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:36.359Z,1520517216.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:36.762Z,1520517216.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:37.156Z,1520517217.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:37.544Z,1520517217.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:37.974Z,1520517217.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:38.359Z,1520517218.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:38.759Z,1520517218.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:39.158Z,1520517219.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:39.553Z,1520517219.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:39.950Z,1520517219.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:40.368Z,1520517220.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:40.757Z,1520517220.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:41.159Z,1520517221.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:41.554Z,1520517221.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:41.927Z,1520517221.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:42.371Z,1520517222.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:42.762Z,1520517222.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:43.158Z,1520517223.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:43.563Z,1520517223.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:43.978Z,1520517223.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:44.378Z,1520517224.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:44.748Z,1520517224.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:45.149Z,1520517225.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:45.545Z,1520517225.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:45.945Z,1520517225.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:46.347Z,1520517226.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:46.755Z,1520517226.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:47.152Z,1520517227.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:47.546Z,1520517227.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:47.950Z,1520517227.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:48.357Z,1520517228.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:48.784Z,1520517228.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:49.155Z,1520517229.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:49.543Z,1520517229.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:49.954Z,1520517229.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:50.362Z,1520517230.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:50.759Z,1520517230.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:51.170Z,1520517231.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:51.551Z,1520517231.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:51.953Z,1520517231.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:52.353Z,1520517232.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:52.756Z,1520517232.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:53.155Z,1520517233.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:53.551Z,1520517233.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:53.940Z,1520517233.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:54.359Z,1520517234.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:54.758Z,1520517234.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:55.159Z,1520517235.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:55.551Z,1520517235.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:55.962Z,1520517235.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:56.360Z,1520517236.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:56.759Z,1520517236.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:57.163Z,1520517237.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:57.539Z,1520517237.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:57.946Z,1520517237.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:58.373Z,1520517238.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:58.747Z,1520517238.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:59.152Z,1520517239.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:59.539Z,1520517239.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:53:59.942Z,1520517239.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:00.352Z,1520517240.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:00.752Z,1520517240.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:01.152Z,1520517241.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:01.542Z,1520517241.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:04.881Z,1520517244.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:04.997Z,1520517244.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:05.374Z,1520517245.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:05.798Z,1520517245.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:06.147Z,1520517246.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:06.551Z,1520517246.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:06.949Z,1520517246.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:07.375Z,1520517247.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:07.775Z,1520517247.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:08.178Z,1520517248.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:08.551Z,1520517248.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:08.950Z,1520517248.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:09.377Z,1520517249.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:09.765Z,1520517249.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:10.177Z,1520517250.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:10.551Z,1520517250.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:10.991Z,1520517250.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:11.353Z,1520517251.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:11.783Z,1520517251.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:12.158Z,1520517252.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:12.551Z,1520517252.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:12.952Z,1520517252.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:13.358Z,1520517253.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:13.761Z,1520517253.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:14.181Z,1520517254.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:14.554Z,1520517254.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:14.957Z,1520517254.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:15.361Z,1520517255.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:15.760Z,1520517255.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:16.160Z,1520517256.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:16.559Z,1520517256.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:16.951Z,1520517256.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:17.359Z,1520517257.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:17.760Z,1520517257.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:18.159Z,1520517258.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:18.554Z,1520517258.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:18.949Z,1520517258.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:19.359Z,1520517259.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:19.761Z,1520517259.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:20.170Z,1520517260.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:20.553Z,1520517260.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:20.960Z,1520517260.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:21.364Z,1520517261.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:21.757Z,1520517261.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:22.160Z,1520517262.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:22.555Z,1520517262.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:22.950Z,1520517262.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:23.371Z,1520517263.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:23.764Z,1520517263.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:24.163Z,1520517264.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:24.556Z,1520517264.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:24.954Z,1520517264.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:25.370Z,1520517265.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:25.764Z,1520517265.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:26.164Z,1520517266.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:26.556Z,1520517266.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:26.963Z,1520517266.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:27.366Z,1520517267.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:27.761Z,1520517267.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:28.174Z,1520517268.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:28.557Z,1520517268.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:28.947Z,1520517268.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:29.370Z,1520517269.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:29.769Z,1520517269.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:30.165Z,1520517270.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:30.555Z,1520517270.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:30.960Z,1520517270.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:31.366Z,1520517271.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:31.769Z,1520517271.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:32.166Z,1520517272.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:32.559Z,1520517272.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:32.959Z,1520517272.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:33.367Z,1520517273.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:33.761Z,1520517273.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:34.169Z,1520517274.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:34.560Z,1520517274.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:34.958Z,1520517274.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:35.363Z,1520517275.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:35.778Z,1520517275.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:36.171Z,1520517276.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:36.554Z,1520517276.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:36.959Z,1520517276.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:37.364Z,1520517277.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:37.774Z,1520517277.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:38.166Z,1520517278.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:38.557Z,1520517278.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:38.962Z,1520517278.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:39.371Z,1520517279.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:39.771Z,1520517279.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:40.167Z,1520517280.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:40.563Z,1520517280.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:40.961Z,1520517280.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:41.367Z,1520517281.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:41.779Z,1520517281.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:42.169Z,1520517282.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:42.563Z,1520517282.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:42.966Z,1520517282.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:43.375Z,1520517283.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:43.774Z,1520517283.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:44.169Z,1520517284.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:44.556Z,1520517284.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:44.947Z,1520517284.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:45.373Z,1520517285.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:45.772Z,1520517285.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:46.179Z,1520517286.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:46.554Z,1520517286.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:46.952Z,1520517286.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:47.377Z,1520517287.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:47.757Z,1520517287.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:48.177Z,1520517288.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:48.553Z,1520517288.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:48.952Z,1520517288.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:49.377Z,1520517289.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:49.777Z,1520517289.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:50.180Z,1520517290.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:50.553Z,1520517290.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:50.983Z,1520517290.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:51.354Z,1520517291.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:51.767Z,1520517291.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:52.167Z,1520517292.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:52.556Z,1520517292.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:52.958Z,1520517292.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:53.360Z,1520517293.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:53.762Z,1520517293.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:54.167Z,1520517294.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:54.557Z,1520517294.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:54.959Z,1520517294.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:55.360Z,1520517295.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:55.759Z,1520517295.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:56.159Z,1520517296.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:56.555Z,1520517296.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:56.954Z,1520517296.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:57.360Z,1520517297.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:57.761Z,1520517297.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:58.181Z,1520517298.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:58.593Z,1520517298.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:58.954Z,1520517298.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:59.360Z,1520517299.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:54:59.763Z,1520517299.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:00.174Z,1520517300.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:00.555Z,1520517300.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:00.961Z,1520517300.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:01.367Z,1520517301.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:01.768Z,1520517301.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:04.867Z,1520517304.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:04.975Z,1520517304.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:05.372Z,1520517305.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:05.771Z,1520517305.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:06.173Z,1520517306.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:06.573Z,1520517306.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:06.978Z,1520517306.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:07.372Z,1520517307.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:07.778Z,1520517307.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:08.172Z,1520517308.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:08.575Z,1520517308.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:08.979Z,1520517308.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:09.380Z,1520517309.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:09.779Z,1520517309.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:10.187Z,1520517310.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:10.576Z,1520517310.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:10.972Z,1520517310.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:11.389Z,1520517311.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:11.786Z,1520517311.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:12.198Z,1520517312.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:12.582Z,1520517312.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:12.986Z,1520517312.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:13.439Z,1520517313.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:13.804Z,1520517313.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:14.214Z,1520517314.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:14.568Z,1520517314.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:14.971Z,1520517314.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:15.375Z,1520517315.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:15.796Z,1520517315.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:16.195Z,1520517316.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:16.567Z,1520517316.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:16.971Z,1520517316.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:17.391Z,1520517317.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:17.798Z,1520517317.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:18.190Z,1520517318.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:18.571Z,1520517318.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:18.971Z,1520517318.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:19.379Z,1520517319.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:19.777Z,1520517319.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:20.184Z,1520517320.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:20.573Z,1520517320.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:20.970Z,1520517320.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:21.384Z,1520517321.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:21.801Z,1520517321.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:22.187Z,1520517322.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:22.575Z,1520517322.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:22.981Z,1520517322.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:23.396Z,1520517323.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:23.792Z,1520517323.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:24.191Z,1520517324.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:24.598Z,1520517324.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:24.961Z,1520517324.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:25.389Z,1520517325.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:25.787Z,1520517325.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:26.211Z,1520517326.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:26.565Z,1520517326.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:26.970Z,1520517326.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:27.397Z,1520517327.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:27.796Z,1520517327.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:28.196Z,1520517328.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:28.569Z,1520517328.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:28.972Z,1520517328.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:29.391Z,1520517329.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:29.794Z,1520517329.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:30.210Z,1520517330.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:30.603Z,1520517330.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:30.990Z,1520517330.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:31.398Z,1520517331.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:31.777Z,1520517331.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:32.199Z,1520517332.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:32.573Z,1520517332.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:32.971Z,1520517332.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:33.400Z,1520517333.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:33.772Z,1520517333.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:34.197Z,1520517334.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:34.570Z,1520517334.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:34.969Z,1520517334.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:35.340Z,1520517335.340 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T13:55:35.340Z,1520517335.340 [NAL9602] Data Fault, FailCount= 5
2018-03-08T13:55:35.340Z,1520517335.340 [NAL9602](ERROR): Data Fault
2018-03-08T13:55:35.371Z,1520517335.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:35.405Z,1520517335.405 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T13:55:35.405Z,1520517335.405 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-08T13:55:35.730Z,1520517335.730 [NAL9602](INFO): Powering down
2018-03-08T13:55:35.776Z,1520517335.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:35.787Z,1520517335.787 [CBIT](INFO): Critical error at 20180308T135535
2018-03-08T13:55:36.170Z,1520517336.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:36.578Z,1520517336.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:36.969Z,1520517336.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:37.367Z,1520517337.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:37.769Z,1520517337.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:38.211Z,1520517338.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:38.583Z,1520517338.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:38.978Z,1520517338.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:39.372Z,1520517339.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:39.779Z,1520517339.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:40.178Z,1520517340.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:40.572Z,1520517340.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:40.972Z,1520517340.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:41.371Z,1520517341.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:41.773Z,1520517341.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:42.187Z,1520517342.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:42.618Z,1520517342.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:42.999Z,1520517342.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:43.385Z,1520517343.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:43.766Z,1520517343.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:44.167Z,1520517344.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:44.604Z,1520517344.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:44.970Z,1520517344.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:45.365Z,1520517345.365 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:45.365Z,1520517345.365 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 124
2018-03-08T13:55:45.365Z,1520517345.365 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T13:55:45.367Z,1520517345.367 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:45.367Z,1520517345.367 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 124
2018-03-08T13:55:45.367Z,1520517345.367 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T13:55:45.369Z,1520517345.369 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:45.369Z,1520517345.369 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 124
2018-03-08T13:55:45.369Z,1520517345.369 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T13:55:45.409Z,1520517345.409 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T13:55:45.410Z,1520517345.410 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T13:55:45.410Z,1520517345.410 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T13:55:45.789Z,1520517345.789 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T13:55:45.790Z,1520517345.790 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 124
2018-03-08T13:55:45.790Z,1520517345.790 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T13:55:45.790Z,1520517345.790 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 124
2018-03-08T13:55:45.791Z,1520517345.791 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T13:55:45.791Z,1520517345.791 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 124
2018-03-08T13:55:46.170Z,1520517346.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T13:55:46.170Z,1520517346.170 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:55:46.170Z,1520517346.170 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:55:46.171Z,1520517346.171 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T13:55:46.171Z,1520517346.171 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:55:46.171Z,1520517346.171 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:55:46.172Z,1520517346.172 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T13:55:46.172Z,1520517346.172 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:55:46.173Z,1520517346.173 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:55:46.574Z,1520517346.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T13:55:46.575Z,1520517346.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:46.966Z,1520517346.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T13:55:46.967Z,1520517346.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:47.370Z,1520517347.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T13:55:47.371Z,1520517347.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:47.769Z,1520517347.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T13:55:47.770Z,1520517347.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:48.167Z,1520517348.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T13:55:48.168Z,1520517348.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:48.585Z,1520517348.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T13:55:48.586Z,1520517348.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:48.975Z,1520517348.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T13:55:48.976Z,1520517348.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:49.374Z,1520517349.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T13:55:49.375Z,1520517349.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:49.778Z,1520517349.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T13:55:49.779Z,1520517349.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:50.177Z,1520517350.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T13:55:50.178Z,1520517350.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:50.578Z,1520517350.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T13:55:50.578Z,1520517350.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:50.979Z,1520517350.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T13:55:50.980Z,1520517350.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:51.418Z,1520517351.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T13:55:51.419Z,1520517351.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:51.775Z,1520517351.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T13:55:51.776Z,1520517351.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:52.178Z,1520517352.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T13:55:52.179Z,1520517352.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:52.584Z,1520517352.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T13:55:52.585Z,1520517352.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:52.977Z,1520517352.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T13:55:52.978Z,1520517352.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:53.385Z,1520517353.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T13:55:53.386Z,1520517353.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:53.761Z,1520517353.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T13:55:53.761Z,1520517353.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:54.161Z,1520517354.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T13:55:54.162Z,1520517354.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:54.603Z,1520517354.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T13:55:54.604Z,1520517354.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:55.023Z,1520517355.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-08T13:55:55.024Z,1520517355.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:55.402Z,1520517355.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T13:55:55.403Z,1520517355.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:55.815Z,1520517355.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-08T13:55:55.816Z,1520517355.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:56.181Z,1520517356.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T13:55:56.182Z,1520517356.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:56.584Z,1520517356.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T13:55:56.589Z,1520517356.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:56.971Z,1520517356.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T13:55:56.972Z,1520517356.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:57.372Z,1520517357.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T13:55:57.373Z,1520517357.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:57.776Z,1520517357.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T13:55:57.777Z,1520517357.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:58.183Z,1520517358.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T13:55:58.184Z,1520517358.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:58.581Z,1520517358.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T13:55:58.582Z,1520517358.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:58.966Z,1520517358.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T13:55:58.967Z,1520517358.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:59.380Z,1520517359.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T13:55:59.381Z,1520517359.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:55:59.781Z,1520517359.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T13:55:59.781Z,1520517359.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:00.164Z,1520517360.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T13:56:00.185Z,1520517360.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:00.586Z,1520517360.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T13:56:00.587Z,1520517360.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:00.964Z,1520517360.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T13:56:00.965Z,1520517360.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:01.361Z,1520517361.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T13:56:01.362Z,1520517361.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:01.767Z,1520517361.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T13:56:01.768Z,1520517361.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:04.897Z,1520517364.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-03-08T13:56:04.898Z,1520517364.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:05.042Z,1520517365.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T13:56:05.043Z,1520517365.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:05.369Z,1520517365.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:05.768Z,1520517365.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:06.169Z,1520517366.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:06.567Z,1520517366.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:06.968Z,1520517366.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:07.401Z,1520517367.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:07.806Z,1520517367.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:08.165Z,1520517368.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:08.567Z,1520517368.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:08.967Z,1520517368.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:09.368Z,1520517369.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:09.769Z,1520517369.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:10.172Z,1520517370.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:10.569Z,1520517370.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:10.968Z,1520517370.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:11.369Z,1520517371.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:11.766Z,1520517371.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:12.164Z,1520517372.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:12.570Z,1520517372.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:12.965Z,1520517372.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:13.368Z,1520517373.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:13.770Z,1520517373.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:14.165Z,1520517374.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:14.572Z,1520517374.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:15.009Z,1520517375.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:15.369Z,1520517375.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:15.769Z,1520517375.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:16.174Z,1520517376.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:16.569Z,1520517376.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:16.969Z,1520517376.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:17.375Z,1520517377.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:17.769Z,1520517377.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:18.173Z,1520517378.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:18.568Z,1520517378.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:18.974Z,1520517378.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:19.368Z,1520517379.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:19.826Z,1520517379.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:20.194Z,1520517380.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:20.575Z,1520517380.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:20.983Z,1520517380.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:21.354Z,1520517381.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:21.759Z,1520517381.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:22.181Z,1520517382.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:22.558Z,1520517382.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:22.955Z,1520517382.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:23.360Z,1520517383.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:23.758Z,1520517383.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:24.159Z,1520517384.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:24.564Z,1520517384.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:24.959Z,1520517384.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:25.358Z,1520517385.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:25.758Z,1520517385.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:26.161Z,1520517386.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:26.555Z,1520517386.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:26.964Z,1520517386.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:27.366Z,1520517387.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:27.766Z,1520517387.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:28.162Z,1520517388.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:28.563Z,1520517388.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:28.967Z,1520517388.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:29.397Z,1520517389.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:29.770Z,1520517389.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:30.168Z,1520517390.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:30.565Z,1520517390.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:30.972Z,1520517390.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:31.375Z,1520517391.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:31.772Z,1520517391.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:32.187Z,1520517392.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:32.591Z,1520517392.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:32.970Z,1520517392.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:33.372Z,1520517393.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:33.778Z,1520517393.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:34.172Z,1520517394.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:34.572Z,1520517394.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:34.966Z,1520517394.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:35.378Z,1520517395.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:35.782Z,1520517395.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:36.178Z,1520517396.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:36.559Z,1520517396.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:36.959Z,1520517396.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:37.357Z,1520517397.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:37.761Z,1520517397.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:38.187Z,1520517398.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:38.566Z,1520517398.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:38.961Z,1520517398.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:39.389Z,1520517399.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:39.769Z,1520517399.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:40.168Z,1520517400.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:40.580Z,1520517400.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:40.970Z,1520517400.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:41.374Z,1520517401.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:41.773Z,1520517401.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:42.176Z,1520517402.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:42.566Z,1520517402.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:42.973Z,1520517402.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:43.368Z,1520517403.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:43.778Z,1520517403.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:44.173Z,1520517404.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:44.583Z,1520517404.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:44.994Z,1520517404.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:45.376Z,1520517405.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:45.780Z,1520517405.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:46.181Z,1520517406.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:46.562Z,1520517406.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:46.962Z,1520517406.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:47.364Z,1520517407.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:47.757Z,1520517407.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:48.163Z,1520517408.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:48.562Z,1520517408.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:48.959Z,1520517408.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:49.362Z,1520517409.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:49.763Z,1520517409.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:50.166Z,1520517410.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:50.564Z,1520517410.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:50.597Z,1520517410.597 [CBIT](INFO): Clearing failed state for component DropWeight
2018-03-08T13:56:50.597Z,1520517410.597 [DropWeight] No Fault, FailCount= 1
2018-03-08T13:56:50.962Z,1520517410.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:51.366Z,1520517411.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:51.767Z,1520517411.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:52.174Z,1520517412.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:52.564Z,1520517412.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:52.972Z,1520517412.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:53.367Z,1520517413.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:53.776Z,1520517413.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:54.173Z,1520517414.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:54.565Z,1520517414.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:54.971Z,1520517414.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:55.371Z,1520517415.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:55.770Z,1520517415.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:56.169Z,1520517416.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:56.566Z,1520517416.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:56.972Z,1520517416.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:57.378Z,1520517417.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:57.810Z,1520517417.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:58.164Z,1520517418.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:58.570Z,1520517418.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:58.969Z,1520517418.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:59.364Z,1520517419.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:56:59.770Z,1520517419.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:00.169Z,1520517420.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:00.574Z,1520517420.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:00.963Z,1520517420.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:01.369Z,1520517421.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:01.765Z,1520517421.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:02.165Z,1520517422.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:05.267Z,1520517425.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:05.271Z,1520517425.271 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T13:52:04.5Z
2018-03-08T13:57:05.271Z,1520517425.271 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T13:57:05.271Z,1520517425.271 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T13:57:05.386Z,1520517425.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:05.798Z,1520517425.798 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180308T074127/Courier0144.lzma
2018-03-08T13:57:05.838Z,1520517425.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:06.170Z,1520517426.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:06.504Z,1520517426.504 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0144.lzma.bak
2018-03-08T13:57:06.505Z,1520517426.505 [DataOverHttps](INFO): SBD MOMSN=7986242
2018-03-08T13:57:06.580Z,1520517426.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:07.110Z,1520517427.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:07.340Z,1520517427.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:11.087Z,1520517431.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:11.267Z,1520517431.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:11.558Z,1520517431.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:11.955Z,1520517431.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:12.362Z,1520517432.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:12.758Z,1520517432.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:13.159Z,1520517433.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:16.255Z,1520517436.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:16.394Z,1520517436.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:16.685Z,1520517436.685 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0145.lzma
2018-03-08T13:57:16.735Z,1520517436.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:17.119Z,1520517437.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:17.483Z,1520517437.483 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0145.lzma.bak
2018-03-08T13:57:17.483Z,1520517437.483 [DataOverHttps](INFO): SBD MOMSN=7986245
2018-03-08T13:57:17.537Z,1520517437.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:18.109Z,1520517438.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:18.112Z,1520517438.112 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T13:57:18.113Z,1520517438.113 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T13:57:18.113Z,1520517438.113 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T13:57:18.343Z,1520517438.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:21.463Z,1520517441.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:21.476Z,1520517441.476 [CBIT](IMPORTANT): Beginning ground fault scan
2018-03-08T13:57:21.590Z,1520517441.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:21.935Z,1520517441.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:22.334Z,1520517442.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:22.737Z,1520517442.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:23.141Z,1520517443.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:23.628Z,1520517443.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:23.959Z,1520517443.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:24.335Z,1520517444.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:24.729Z,1520517444.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:25.135Z,1520517445.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:25.535Z,1520517445.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:25.934Z,1520517445.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:26.335Z,1520517446.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:26.735Z,1520517446.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:27.134Z,1520517447.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:27.531Z,1520517447.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:27.934Z,1520517447.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:28.330Z,1520517448.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:28.730Z,1520517448.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:29.133Z,1520517449.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:29.545Z,1520517449.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:29.930Z,1520517449.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:30.333Z,1520517450.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:30.734Z,1520517450.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:31.135Z,1520517451.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:31.539Z,1520517451.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:31.947Z,1520517451.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:32.019Z,1520517452.019 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.007454
CHAN A1 (24V): -0.005395
CHAN A2 (12V): 0.000961
CHAN A3 (5V): -0.000948
CHAN B0 (3.3V): 0.000799
CHAN B1 (3.15aV): 0.000296
CHAN B2 (3.15bV): -0.000384
CHAN B3 (GND): -0.000828
OPEN: 0.005720
Full Scale Calc: 4.765 mA, -1.589 mA
2018-03-08T13:57:32.364Z,1520517452.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:32.753Z,1520517452.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:33.131Z,1520517453.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:33.529Z,1520517453.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:33.957Z,1520517453.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:34.331Z,1520517454.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:34.729Z,1520517454.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:35.173Z,1520517455.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:35.569Z,1520517455.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:35.583Z,1520517455.583 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T13:57:35.583Z,1520517455.583 [NAL9602] No Fault, FailCount= 5
2018-03-08T13:57:35.894Z,1520517455.894 [NAL9602](INFO): Powering up NAL9602
2018-03-08T13:57:35.978Z,1520517455.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:36.378Z,1520517456.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:36.736Z,1520517456.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:37.136Z,1520517457.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:37.550Z,1520517457.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:37.937Z,1520517457.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:38.331Z,1520517458.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:38.745Z,1520517458.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:39.151Z,1520517459.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:39.540Z,1520517459.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:39.936Z,1520517459.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:40.338Z,1520517460.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:40.755Z,1520517460.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:41.140Z,1520517461.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:41.544Z,1520517461.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:41.932Z,1520517461.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:42.342Z,1520517462.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:42.750Z,1520517462.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:43.150Z,1520517463.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:43.551Z,1520517463.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:43.960Z,1520517463.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:44.359Z,1520517464.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:44.727Z,1520517464.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:45.138Z,1520517465.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:45.574Z,1520517465.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:45.943Z,1520517465.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:46.367Z,1520517466.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:46.694Z,1520517466.694 [NAL9602](INFO): NAL9602 initialized
2018-03-08T13:57:46.737Z,1520517466.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:47.133Z,1520517467.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:47.550Z,1520517467.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:47.992Z,1520517467.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:48.409Z,1520517468.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:48.763Z,1520517468.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:49.147Z,1520517469.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:49.541Z,1520517469.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:49.957Z,1520517469.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:50.352Z,1520517470.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:50.762Z,1520517470.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:51.146Z,1520517471.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:51.547Z,1520517471.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:51.945Z,1520517471.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:52.346Z,1520517472.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:52.750Z,1520517472.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:53.169Z,1520517473.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:53.595Z,1520517473.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:53.948Z,1520517473.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:54.333Z,1520517474.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:54.764Z,1520517474.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:55.132Z,1520517475.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:55.562Z,1520517475.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:55.936Z,1520517475.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:56.331Z,1520517476.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:56.740Z,1520517476.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:57.164Z,1520517477.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:57.557Z,1520517477.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:57.943Z,1520517477.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:58.335Z,1520517478.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:58.737Z,1520517478.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:59.174Z,1520517479.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:59.543Z,1520517479.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:57:59.962Z,1520517479.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:00.359Z,1520517480.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:00.786Z,1520517480.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:01.171Z,1520517481.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:01.571Z,1520517481.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:01.955Z,1520517481.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:02.351Z,1520517482.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:02.758Z,1520517482.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:03.153Z,1520517483.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:03.555Z,1520517483.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:03.951Z,1520517483.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:04.358Z,1520517484.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:04.749Z,1520517484.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:05.157Z,1520517485.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:05.561Z,1520517485.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:05.939Z,1520517485.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:06.336Z,1520517486.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:06.771Z,1520517486.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:07.140Z,1520517487.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:07.562Z,1520517487.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:07.939Z,1520517487.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:08.337Z,1520517488.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:08.741Z,1520517488.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:09.142Z,1520517489.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:09.544Z,1520517489.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:09.938Z,1520517489.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:10.340Z,1520517490.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:10.748Z,1520517490.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:11.148Z,1520517491.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:11.583Z,1520517491.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:11.946Z,1520517491.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:12.338Z,1520517492.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:12.749Z,1520517492.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:13.208Z,1520517493.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:13.571Z,1520517493.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:13.974Z,1520517493.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:14.335Z,1520517494.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:14.762Z,1520517494.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:15.161Z,1520517495.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:15.548Z,1520517495.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:15.941Z,1520517495.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:16.373Z,1520517496.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:16.787Z,1520517496.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:17.175Z,1520517497.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:17.673Z,1520517497.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:17.934Z,1520517497.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:18.356Z,1520517498.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:18.741Z,1520517498.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:22.331Z,1520517502.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:22.485Z,1520517502.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:22.827Z,1520517502.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:23.200Z,1520517503.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:23.610Z,1520517503.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:24.034Z,1520517504.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:24.445Z,1520517504.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:24.808Z,1520517504.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:25.246Z,1520517505.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:25.662Z,1520517505.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:26.022Z,1520517506.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:26.434Z,1520517506.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:26.831Z,1520517506.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:27.208Z,1520517507.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:27.608Z,1520517507.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:28.004Z,1520517508.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:28.409Z,1520517508.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:28.812Z,1520517508.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:29.204Z,1520517509.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:29.609Z,1520517509.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:30.039Z,1520517510.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:30.408Z,1520517510.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:30.813Z,1520517510.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:31.215Z,1520517511.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:31.610Z,1520517511.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:32.010Z,1520517512.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:32.408Z,1520517512.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:32.817Z,1520517512.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:33.242Z,1520517513.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:33.623Z,1520517513.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:34.007Z,1520517514.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:34.418Z,1520517514.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:34.802Z,1520517514.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:35.206Z,1520517515.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:35.606Z,1520517515.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:36.009Z,1520517516.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:36.413Z,1520517516.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:36.808Z,1520517516.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:37.206Z,1520517517.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:37.609Z,1520517517.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:38.046Z,1520517518.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:38.447Z,1520517518.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:38.817Z,1520517518.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:39.218Z,1520517519.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:39.620Z,1520517519.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:40.011Z,1520517520.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:40.414Z,1520517520.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:40.818Z,1520517520.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:41.203Z,1520517521.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:41.598Z,1520517521.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:42.028Z,1520517522.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:42.429Z,1520517522.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:42.816Z,1520517522.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:43.205Z,1520517523.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:43.602Z,1520517523.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:44.006Z,1520517524.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:44.408Z,1520517524.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:44.809Z,1520517524.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:45.213Z,1520517525.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:45.613Z,1520517525.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:46.006Z,1520517526.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:46.402Z,1520517526.402 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:46.402Z,1520517526.402 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 125
2018-03-08T13:58:46.402Z,1520517526.402 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T13:58:46.404Z,1520517526.404 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:46.404Z,1520517526.404 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 125
2018-03-08T13:58:46.404Z,1520517526.404 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T13:58:46.406Z,1520517526.406 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:46.406Z,1520517526.406 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 125
2018-03-08T13:58:46.406Z,1520517526.406 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T13:58:46.418Z,1520517526.418 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T13:58:46.418Z,1520517526.418 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T13:58:46.418Z,1520517526.418 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T13:58:46.866Z,1520517526.866 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T13:58:46.866Z,1520517526.866 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 125
2018-03-08T13:58:46.867Z,1520517526.867 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T13:58:46.867Z,1520517526.867 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 125
2018-03-08T13:58:46.867Z,1520517526.867 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T13:58:46.867Z,1520517526.867 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 125
2018-03-08T13:58:47.217Z,1520517527.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T13:58:47.218Z,1520517527.218 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:58:47.218Z,1520517527.218 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:58:47.218Z,1520517527.218 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T13:58:47.219Z,1520517527.219 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:58:47.219Z,1520517527.219 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:58:47.219Z,1520517527.219 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T13:58:47.220Z,1520517527.220 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T13:58:47.220Z,1520517527.220 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T13:58:47.613Z,1520517527.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T13:58:47.614Z,1520517527.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:48.018Z,1520517528.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T13:58:48.019Z,1520517528.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:48.420Z,1520517528.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T13:58:48.421Z,1520517528.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:48.818Z,1520517528.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T13:58:48.819Z,1520517528.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:49.210Z,1520517529.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T13:58:49.211Z,1520517529.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:49.618Z,1520517529.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T13:58:49.619Z,1520517529.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:49.995Z,1520517529.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T13:58:49.996Z,1520517529.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:50.442Z,1520517530.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T13:58:50.443Z,1520517530.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:50.874Z,1520517530.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-03-08T13:58:50.875Z,1520517530.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:51.223Z,1520517531.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T13:58:51.224Z,1520517531.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:51.627Z,1520517531.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T13:58:51.628Z,1520517531.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:51.999Z,1520517531.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T13:58:52.000Z,1520517532.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:52.401Z,1520517532.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T13:58:52.402Z,1520517532.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:52.803Z,1520517532.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T13:58:52.804Z,1520517532.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:53.206Z,1520517533.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T13:58:53.207Z,1520517533.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:53.598Z,1520517533.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T13:58:53.599Z,1520517533.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:54.028Z,1520517534.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T13:58:54.029Z,1520517534.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:54.412Z,1520517534.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T13:58:54.425Z,1520517534.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:54.833Z,1520517534.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T13:58:54.834Z,1520517534.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:55.202Z,1520517535.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T13:58:55.203Z,1520517535.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:55.601Z,1520517535.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T13:58:55.602Z,1520517535.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:56.001Z,1520517536.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T13:58:56.002Z,1520517536.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:56.402Z,1520517536.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T13:58:56.403Z,1520517536.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:56.837Z,1520517536.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T13:58:56.838Z,1520517536.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:57.211Z,1520517537.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T13:58:57.213Z,1520517537.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:57.612Z,1520517537.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T13:58:57.613Z,1520517537.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:58.005Z,1520517538.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T13:58:58.006Z,1520517538.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:58.404Z,1520517538.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T13:58:58.405Z,1520517538.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:58.804Z,1520517538.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T13:58:58.805Z,1520517538.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:59.210Z,1520517539.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T13:58:59.211Z,1520517539.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:58:59.610Z,1520517539.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T13:58:59.611Z,1520517539.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:00.012Z,1520517540.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T13:59:00.013Z,1520517540.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:00.408Z,1520517540.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T13:59:00.409Z,1520517540.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:00.807Z,1520517540.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T13:59:00.808Z,1520517540.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:01.206Z,1520517541.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T13:59:01.207Z,1520517541.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:01.610Z,1520517541.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T13:59:01.611Z,1520517541.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:02.004Z,1520517542.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T13:59:02.005Z,1520517542.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:02.407Z,1520517542.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T13:59:02.409Z,1520517542.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:02.809Z,1520517542.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T13:59:02.810Z,1520517542.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:03.237Z,1520517543.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T13:59:03.238Z,1520517543.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:03.649Z,1520517543.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T13:59:03.650Z,1520517543.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:04.002Z,1520517544.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T13:59:04.003Z,1520517544.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:04.403Z,1520517544.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T13:59:04.404Z,1520517544.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:04.807Z,1520517544.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T13:59:04.808Z,1520517544.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:05.210Z,1520517545.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T13:59:05.211Z,1520517545.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:05.603Z,1520517545.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T13:59:05.604Z,1520517545.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:06.012Z,1520517546.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T13:59:06.013Z,1520517546.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:06.413Z,1520517546.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:06.812Z,1520517546.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:07.204Z,1520517547.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:07.610Z,1520517547.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:08.007Z,1520517548.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:08.404Z,1520517548.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:08.818Z,1520517548.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:09.213Z,1520517549.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:09.615Z,1520517549.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:10.010Z,1520517550.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:10.406Z,1520517550.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:10.807Z,1520517550.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:11.205Z,1520517551.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:11.603Z,1520517551.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:12.012Z,1520517552.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:12.413Z,1520517552.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:12.811Z,1520517552.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:13.207Z,1520517553.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:13.606Z,1520517553.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:14.046Z,1520517554.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:14.405Z,1520517554.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:14.811Z,1520517554.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:15.212Z,1520517555.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:15.624Z,1520517555.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:16.039Z,1520517556.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:16.405Z,1520517556.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:16.807Z,1520517556.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:17.202Z,1520517557.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:17.605Z,1520517557.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:18.022Z,1520517558.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:18.412Z,1520517558.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:18.815Z,1520517558.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:23.265Z,1520517563.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:23.376Z,1520517563.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:23.806Z,1520517563.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:24.183Z,1520517564.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:24.580Z,1520517564.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:24.970Z,1520517564.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:25.378Z,1520517565.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:25.779Z,1520517565.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:26.173Z,1520517566.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:26.570Z,1520517566.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:26.976Z,1520517566.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:27.381Z,1520517567.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:27.783Z,1520517567.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:28.182Z,1520517568.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:28.607Z,1520517568.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:28.971Z,1520517568.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:29.371Z,1520517569.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:29.777Z,1520517569.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:30.192Z,1520517570.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:30.581Z,1520517570.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:30.968Z,1520517570.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:31.372Z,1520517571.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:31.772Z,1520517571.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:32.170Z,1520517572.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:32.571Z,1520517572.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:32.977Z,1520517572.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:33.380Z,1520517573.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:33.792Z,1520517573.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:34.172Z,1520517574.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:34.568Z,1520517574.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:34.972Z,1520517574.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:35.368Z,1520517575.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:35.781Z,1520517575.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:36.187Z,1520517576.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:36.623Z,1520517576.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:36.977Z,1520517576.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:37.378Z,1520517577.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:37.779Z,1520517577.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:38.175Z,1520517578.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:38.578Z,1520517578.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:38.984Z,1520517578.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:39.390Z,1520517579.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:39.789Z,1520517579.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:40.164Z,1520517580.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:40.594Z,1520517580.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:41.015Z,1520517581.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:41.398Z,1520517581.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:41.775Z,1520517581.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:42.176Z,1520517582.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:42.573Z,1520517582.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:42.972Z,1520517582.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:43.367Z,1520517583.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:43.774Z,1520517583.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:44.167Z,1520517584.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:44.568Z,1520517584.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:45.015Z,1520517585.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:45.380Z,1520517585.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:45.790Z,1520517585.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:46.175Z,1520517586.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:46.572Z,1520517586.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:46.972Z,1520517586.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:47.371Z,1520517587.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:47.783Z,1520517587.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:48.207Z,1520517588.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:48.580Z,1520517588.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:48.983Z,1520517588.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:49.377Z,1520517589.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:49.768Z,1520517589.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:50.169Z,1520517590.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:50.571Z,1520517590.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:50.980Z,1520517590.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:51.381Z,1520517591.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:51.786Z,1520517591.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:52.170Z,1520517592.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:52.587Z,1520517592.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:52.990Z,1520517592.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:53.379Z,1520517593.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:53.816Z,1520517593.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:54.195Z,1520517594.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:54.577Z,1520517594.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:54.968Z,1520517594.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:55.371Z,1520517595.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:55.775Z,1520517595.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:56.176Z,1520517596.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:56.575Z,1520517596.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:56.988Z,1520517596.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:57.381Z,1520517597.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:57.790Z,1520517597.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:58.168Z,1520517598.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:58.578Z,1520517598.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:58.982Z,1520517598.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:59.378Z,1520517599.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T13:59:59.791Z,1520517599.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:00.191Z,1520517600.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:00.588Z,1520517600.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:00.977Z,1520517600.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:01.363Z,1520517601.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:01.760Z,1520517601.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:02.164Z,1520517602.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:02.563Z,1520517602.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:02.991Z,1520517602.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:03.394Z,1520517603.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:03.791Z,1520517603.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:04.175Z,1520517604.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:04.569Z,1520517604.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:04.974Z,1520517604.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:05.401Z,1520517605.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:05.779Z,1520517605.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:06.182Z,1520517606.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:06.603Z,1520517606.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:07.023Z,1520517607.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:07.368Z,1520517607.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:07.774Z,1520517607.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:08.178Z,1520517608.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:08.570Z,1520517608.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:08.984Z,1520517608.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:09.380Z,1520517609.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:09.777Z,1520517609.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:10.175Z,1520517610.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:10.569Z,1520517610.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:10.978Z,1520517610.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:11.362Z,1520517611.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:11.768Z,1520517611.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:12.172Z,1520517612.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:12.577Z,1520517612.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:12.968Z,1520517612.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:13.368Z,1520517613.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:13.769Z,1520517613.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:14.169Z,1520517614.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:14.567Z,1520517614.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:14.969Z,1520517614.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:15.372Z,1520517615.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:15.780Z,1520517615.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:16.168Z,1520517616.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:16.568Z,1520517616.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:16.969Z,1520517616.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:17.368Z,1520517617.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:17.807Z,1520517617.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:18.210Z,1520517618.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:18.583Z,1520517618.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:19.003Z,1520517619.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:22.961Z,1520517622.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:23.106Z,1520517623.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:23.458Z,1520517623.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:23.853Z,1520517623.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:24.256Z,1520517624.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:24.629Z,1520517624.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:25.033Z,1520517625.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:25.428Z,1520517625.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:25.862Z,1520517625.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:26.246Z,1520517626.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:26.640Z,1520517626.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:27.039Z,1520517627.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:27.439Z,1520517627.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:27.863Z,1520517627.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:28.264Z,1520517628.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:28.647Z,1520517628.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:29.109Z,1520517629.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:29.460Z,1520517629.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:29.862Z,1520517629.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:30.255Z,1520517630.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:30.627Z,1520517630.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:31.091Z,1520517631.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:31.462Z,1520517631.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:31.853Z,1520517631.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:32.271Z,1520517632.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:32.647Z,1520517632.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:33.036Z,1520517633.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:33.435Z,1520517633.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:33.829Z,1520517633.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:34.239Z,1520517634.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:34.636Z,1520517634.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:35.044Z,1520517635.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:35.488Z,1520517635.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:35.851Z,1520517635.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:36.259Z,1520517636.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:36.642Z,1520517636.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:37.027Z,1520517637.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:37.431Z,1520517637.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:37.855Z,1520517637.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:38.265Z,1520517638.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:38.656Z,1520517638.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:39.027Z,1520517639.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:39.433Z,1520517639.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:39.847Z,1520517639.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:40.239Z,1520517640.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:40.638Z,1520517640.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:41.044Z,1520517641.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:41.451Z,1520517641.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:41.852Z,1520517641.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:42.251Z,1520517642.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:42.637Z,1520517642.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:43.033Z,1520517643.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:43.446Z,1520517643.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:43.876Z,1520517643.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:44.249Z,1520517644.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:44.646Z,1520517644.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:45.050Z,1520517645.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:45.440Z,1520517645.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:45.838Z,1520517645.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:46.250Z,1520517646.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:46.639Z,1520517646.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:47.055Z,1520517647.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:47.452Z,1520517647.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:47.850Z,1520517647.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:48.247Z,1520517648.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:48.625Z,1520517648.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:49.030Z,1520517649.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:49.455Z,1520517649.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:49.848Z,1520517649.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:50.256Z,1520517650.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:50.655Z,1520517650.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:51.027Z,1520517651.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:51.455Z,1520517651.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:51.854Z,1520517651.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:52.232Z,1520517652.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:52.626Z,1520517652.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:53.055Z,1520517653.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:53.456Z,1520517653.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:53.857Z,1520517653.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:54.229Z,1520517654.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:54.655Z,1520517654.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:55.027Z,1520517655.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:55.430Z,1520517655.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:55.880Z,1520517655.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:56.259Z,1520517656.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:56.657Z,1520517656.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:57.032Z,1520517657.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:57.430Z,1520517657.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:57.835Z,1520517657.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:58.235Z,1520517658.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:58.638Z,1520517658.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:59.060Z,1520517659.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:59.478Z,1520517659.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:00:59.859Z,1520517659.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:00.227Z,1520517660.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:00.664Z,1520517660.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:01.032Z,1520517661.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:01.431Z,1520517661.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:01.871Z,1520517661.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:02.237Z,1520517662.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:02.640Z,1520517662.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:03.062Z,1520517663.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:03.432Z,1520517663.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:03.832Z,1520517663.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:04.258Z,1520517664.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:04.631Z,1520517664.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:05.037Z,1520517665.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:05.436Z,1520517665.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:05.842Z,1520517665.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:06.231Z,1520517666.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:06.637Z,1520517666.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:07.046Z,1520517667.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:07.433Z,1520517667.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:07.843Z,1520517667.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:08.246Z,1520517668.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:08.667Z,1520517668.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:09.034Z,1520517669.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:09.443Z,1520517669.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:09.834Z,1520517669.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:10.231Z,1520517670.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:10.630Z,1520517670.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:11.046Z,1520517671.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:11.446Z,1520517671.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:11.840Z,1520517671.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:12.231Z,1520517672.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:12.631Z,1520517672.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:13.042Z,1520517673.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:13.434Z,1520517673.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:13.846Z,1520517673.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:14.240Z,1520517674.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:14.639Z,1520517674.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:15.034Z,1520517675.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:15.431Z,1520517675.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:15.834Z,1520517675.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:16.247Z,1520517676.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:16.636Z,1520517676.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:17.047Z,1520517677.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:17.446Z,1520517677.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:17.841Z,1520517677.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:18.233Z,1520517678.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:18.637Z,1520517678.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:19.047Z,1520517679.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:22.235Z,1520517682.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:22.386Z,1520517682.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:22.729Z,1520517682.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:23.124Z,1520517683.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:23.524Z,1520517683.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:23.925Z,1520517683.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:24.322Z,1520517684.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:24.725Z,1520517684.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:25.130Z,1520517685.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:25.528Z,1520517685.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:25.904Z,1520517685.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:26.302Z,1520517686.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:26.728Z,1520517686.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:27.131Z,1520517687.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:27.531Z,1520517687.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:27.907Z,1520517687.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:28.303Z,1520517688.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:28.733Z,1520517688.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:29.135Z,1520517689.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:29.532Z,1520517689.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:29.912Z,1520517689.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:30.305Z,1520517690.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:30.732Z,1520517690.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:31.137Z,1520517691.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:31.513Z,1520517691.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:31.911Z,1520517691.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:32.306Z,1520517692.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:32.729Z,1520517692.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:33.112Z,1520517693.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:33.520Z,1520517693.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:33.908Z,1520517693.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:34.318Z,1520517694.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:34.750Z,1520517694.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:35.111Z,1520517695.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:35.512Z,1520517695.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:35.946Z,1520517695.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:36.309Z,1520517696.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:36.747Z,1520517696.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:37.147Z,1520517697.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:37.510Z,1520517697.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:37.906Z,1520517697.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:38.314Z,1520517698.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:38.749Z,1520517698.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:39.143Z,1520517699.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:39.522Z,1520517699.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:39.914Z,1520517699.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:40.309Z,1520517700.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:40.719Z,1520517700.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:41.112Z,1520517701.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:41.515Z,1520517701.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:41.911Z,1520517701.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:42.307Z,1520517702.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:42.715Z,1520517702.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:43.116Z,1520517703.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:43.523Z,1520517703.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:43.914Z,1520517703.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:44.314Z,1520517704.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:44.715Z,1520517704.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:45.117Z,1520517705.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:45.553Z,1520517705.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:45.911Z,1520517705.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:46.311Z,1520517706.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:46.723Z,1520517706.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:47.167Z,1520517707.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:47.559Z,1520517707.559 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:47.559Z,1520517707.559 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 126
2018-03-08T14:01:47.559Z,1520517707.559 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T14:01:47.565Z,1520517707.565 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:47.565Z,1520517707.565 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 126
2018-03-08T14:01:47.565Z,1520517707.565 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T14:01:47.567Z,1520517707.567 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:47.567Z,1520517707.567 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 126
2018-03-08T14:01:47.567Z,1520517707.567 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T14:01:47.607Z,1520517707.607 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T14:01:47.608Z,1520517707.608 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T14:01:47.608Z,1520517707.608 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T14:01:47.932Z,1520517707.932 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T14:01:47.932Z,1520517707.932 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 126
2018-03-08T14:01:47.933Z,1520517707.933 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T14:01:47.933Z,1520517707.933 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 126
2018-03-08T14:01:47.933Z,1520517707.933 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T14:01:47.933Z,1520517707.933 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 126
2018-03-08T14:01:48.317Z,1520517708.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T14:01:48.318Z,1520517708.318 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:01:48.318Z,1520517708.318 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:01:48.319Z,1520517708.319 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T14:01:48.319Z,1520517708.319 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:01:48.319Z,1520517708.319 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:01:48.320Z,1520517708.320 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T14:01:48.320Z,1520517708.320 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:01:48.321Z,1520517708.321 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:01:48.725Z,1520517708.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T14:01:48.726Z,1520517708.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:49.130Z,1520517709.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T14:01:49.131Z,1520517709.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:49.144Z,1520517709.144 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T14:01:49.518Z,1520517709.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T14:01:49.519Z,1520517709.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:49.923Z,1520517709.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T14:01:49.924Z,1520517709.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:50.346Z,1520517710.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T14:01:50.347Z,1520517710.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:50.723Z,1520517710.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T14:01:50.724Z,1520517710.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:51.127Z,1520517711.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T14:01:51.127Z,1520517711.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:51.526Z,1520517711.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T14:01:51.527Z,1520517711.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:51.919Z,1520517711.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T14:01:51.919Z,1520517711.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:52.336Z,1520517712.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T14:01:52.360Z,1520517712.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:52.720Z,1520517712.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T14:01:52.721Z,1520517712.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:53.116Z,1520517713.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T14:01:53.117Z,1520517713.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:53.523Z,1520517713.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T14:01:53.524Z,1520517713.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:53.910Z,1520517713.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T14:01:53.911Z,1520517713.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:54.311Z,1520517714.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T14:01:54.312Z,1520517714.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:54.716Z,1520517714.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T14:01:54.717Z,1520517714.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:55.121Z,1520517715.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T14:01:55.122Z,1520517715.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:55.520Z,1520517715.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T14:01:55.521Z,1520517715.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:55.908Z,1520517715.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-03-08T14:01:55.909Z,1520517715.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:56.314Z,1520517716.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T14:01:56.315Z,1520517716.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:56.720Z,1520517716.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T14:01:56.721Z,1520517716.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:57.121Z,1520517717.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T14:01:57.122Z,1520517717.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:57.520Z,1520517717.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T14:01:57.521Z,1520517717.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:57.930Z,1520517717.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T14:01:57.931Z,1520517717.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:58.307Z,1520517718.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-03-08T14:01:58.308Z,1520517718.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:58.721Z,1520517718.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T14:01:58.721Z,1520517718.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:59.131Z,1520517719.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T14:01:59.132Z,1520517719.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:59.538Z,1520517719.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T14:01:59.539Z,1520517719.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:01:59.926Z,1520517719.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T14:01:59.927Z,1520517719.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:00.317Z,1520517720.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T14:02:00.317Z,1520517720.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:00.722Z,1520517720.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T14:02:00.723Z,1520517720.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:01.121Z,1520517721.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T14:02:01.122Z,1520517721.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:01.522Z,1520517721.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T14:02:01.523Z,1520517721.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:01.915Z,1520517721.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T14:02:01.916Z,1520517721.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:02.297Z,1520517722.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-03-08T14:02:02.298Z,1520517722.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:02.719Z,1520517722.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T14:02:02.720Z,1520517722.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:03.124Z,1520517723.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T14:02:03.125Z,1520517723.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:03.521Z,1520517723.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T14:02:03.522Z,1520517723.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:03.913Z,1520517723.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T14:02:03.914Z,1520517723.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:04.302Z,1520517724.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2018-03-08T14:02:04.303Z,1520517724.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:04.739Z,1520517724.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T14:02:04.740Z,1520517724.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:05.112Z,1520517725.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T14:02:05.129Z,1520517725.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:05.526Z,1520517725.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T14:02:05.527Z,1520517725.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:05.969Z,1520517725.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T14:02:05.970Z,1520517725.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:06.309Z,1520517726.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-03-08T14:02:06.309Z,1520517726.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:06.713Z,1520517726.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T14:02:06.714Z,1520517726.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:07.116Z,1520517727.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T14:02:07.117Z,1520517727.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:07.542Z,1520517727.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T14:02:07.549Z,1520517727.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:07.908Z,1520517727.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:08.311Z,1520517728.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:08.718Z,1520517728.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:09.123Z,1520517729.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:09.526Z,1520517729.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:09.911Z,1520517729.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:10.318Z,1520517730.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:10.727Z,1520517730.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:11.128Z,1520517731.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:11.542Z,1520517731.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:11.958Z,1520517731.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:12.330Z,1520517732.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:12.727Z,1520517732.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:13.130Z,1520517733.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:13.527Z,1520517733.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:13.918Z,1520517733.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:14.335Z,1520517734.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:14.723Z,1520517734.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:15.123Z,1520517735.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:15.523Z,1520517735.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:15.896Z,1520517735.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:16.318Z,1520517736.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:16.727Z,1520517736.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:17.124Z,1520517737.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:17.529Z,1520517737.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:17.905Z,1520517737.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:18.337Z,1520517738.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:18.709Z,1520517738.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:18.711Z,1520517738.711 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T14:02:18.712Z,1520517738.712 [Default:CheckIn:C.Wait] Stopped
2018-03-08T14:02:18.712Z,1520517738.712 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T14:02:18.712Z,1520517738.712 [Default:CheckIn:D] Running Loop=1
2018-03-08T14:02:19.112Z,1520517739.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:19.115Z,1520517739.115 [Default:CheckIn:D] Stopped
2018-03-08T14:02:19.115Z,1520517739.115 [Default:CheckIn:E] Running Loop=1
2018-03-08T14:02:22.242Z,1520517742.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:22.245Z,1520517742.245 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 376.571842 min 
2018-03-08T14:02:22.246Z,1520517742.246 [Default:CheckIn:E] Stopped
2018-03-08T14:02:22.246Z,1520517742.246 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T14:02:22.246Z,1520517742.246 [Default:CheckIn] Stopped
2018-03-08T14:02:22.246Z,1520517742.246 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T14:02:22.246Z,1520517742.246 [Default:CheckIn](INFO): Running loop #37
2018-03-08T14:02:22.246Z,1520517742.246 [Default:CheckIn] Running Loop=37
2018-03-08T14:02:22.246Z,1520517742.246 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T14:02:22.246Z,1520517742.246 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T14:02:22.382Z,1520517742.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:22.723Z,1520517742.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:23.117Z,1520517743.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:23.515Z,1520517743.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:23.942Z,1520517743.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:24.354Z,1520517744.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:24.745Z,1520517744.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:25.123Z,1520517745.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:25.515Z,1520517745.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:25.916Z,1520517745.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:26.316Z,1520517746.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:26.743Z,1520517746.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:27.118Z,1520517747.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:27.542Z,1520517747.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:27.916Z,1520517747.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:28.315Z,1520517748.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:28.741Z,1520517748.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:29.161Z,1520517749.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:29.535Z,1520517749.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:29.923Z,1520517749.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:30.314Z,1520517750.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:30.725Z,1520517750.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:31.124Z,1520517751.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:31.524Z,1520517751.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:31.920Z,1520517751.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:32.319Z,1520517752.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:32.755Z,1520517752.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:33.131Z,1520517753.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:33.523Z,1520517753.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:33.922Z,1520517753.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:34.314Z,1520517754.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:34.725Z,1520517754.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:35.124Z,1520517755.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:35.524Z,1520517755.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:35.954Z,1520517755.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:36.346Z,1520517756.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:36.751Z,1520517756.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:37.157Z,1520517757.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:37.589Z,1520517757.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:37.919Z,1520517757.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:38.313Z,1520517758.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:38.744Z,1520517758.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:39.124Z,1520517759.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:39.520Z,1520517759.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:39.911Z,1520517759.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:40.318Z,1520517760.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:40.742Z,1520517760.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:41.124Z,1520517761.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:41.517Z,1520517761.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:41.916Z,1520517761.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:42.315Z,1520517762.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:42.717Z,1520517762.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:43.142Z,1520517763.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:43.543Z,1520517763.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:43.922Z,1520517763.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:44.319Z,1520517764.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:44.721Z,1520517764.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:45.126Z,1520517765.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:45.521Z,1520517765.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:45.922Z,1520517765.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:46.327Z,1520517766.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:46.725Z,1520517766.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:47.154Z,1520517767.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:47.574Z,1520517767.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:47.935Z,1520517767.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:48.329Z,1520517768.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:48.735Z,1520517768.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:49.139Z,1520517769.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:49.529Z,1520517769.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:49.920Z,1520517769.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:50.315Z,1520517770.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:50.738Z,1520517770.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:51.135Z,1520517771.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:51.543Z,1520517771.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:51.928Z,1520517771.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:52.306Z,1520517772.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:52.732Z,1520517772.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:53.133Z,1520517773.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:53.512Z,1520517773.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:53.930Z,1520517773.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:54.309Z,1520517774.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:54.736Z,1520517774.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:55.135Z,1520517775.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:55.537Z,1520517775.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:55.908Z,1520517775.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:56.314Z,1520517776.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:56.720Z,1520517776.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:57.116Z,1520517777.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:57.542Z,1520517777.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:57.915Z,1520517777.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:58.318Z,1520517778.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:58.724Z,1520517778.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:59.123Z,1520517779.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:59.526Z,1520517779.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:02:59.922Z,1520517779.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:00.317Z,1520517780.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:00.723Z,1520517780.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:01.124Z,1520517781.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:01.526Z,1520517781.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:01.918Z,1520517781.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:02.317Z,1520517782.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:02.720Z,1520517782.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:03.119Z,1520517783.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:03.520Z,1520517783.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:03.919Z,1520517783.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:04.328Z,1520517784.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:04.739Z,1520517784.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:05.138Z,1520517785.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:05.523Z,1520517785.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:05.939Z,1520517785.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:06.331Z,1520517786.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:06.717Z,1520517786.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:07.121Z,1520517787.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:07.548Z,1520517787.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:07.916Z,1520517787.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:08.370Z,1520517788.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:08.721Z,1520517788.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:09.146Z,1520517789.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:09.523Z,1520517789.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:09.915Z,1520517789.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:10.308Z,1520517790.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:10.726Z,1520517790.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:11.139Z,1520517791.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:11.516Z,1520517791.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:11.914Z,1520517791.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:12.312Z,1520517792.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:12.731Z,1520517792.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:13.142Z,1520517793.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:13.539Z,1520517793.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:13.934Z,1520517793.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:14.318Z,1520517794.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:14.745Z,1520517794.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:15.124Z,1520517795.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:15.542Z,1520517795.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:15.925Z,1520517795.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:16.318Z,1520517796.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:16.722Z,1520517796.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:17.120Z,1520517797.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:17.520Z,1520517797.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:17.923Z,1520517797.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:18.318Z,1520517798.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:18.721Z,1520517798.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:19.124Z,1520517799.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:22.228Z,1520517802.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:22.358Z,1520517802.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:22.727Z,1520517802.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:23.126Z,1520517803.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:23.534Z,1520517803.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:23.958Z,1520517803.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:24.329Z,1520517804.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:24.729Z,1520517804.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:25.126Z,1520517805.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:25.527Z,1520517805.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:25.927Z,1520517805.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:26.325Z,1520517806.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:26.757Z,1520517806.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:27.133Z,1520517807.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:27.555Z,1520517807.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:27.927Z,1520517807.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:28.334Z,1520517808.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:28.740Z,1520517808.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:29.140Z,1520517809.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:29.528Z,1520517809.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:29.925Z,1520517809.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:30.326Z,1520517810.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:30.740Z,1520517810.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:31.132Z,1520517811.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:31.540Z,1520517811.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:31.924Z,1520517811.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:32.330Z,1520517812.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:32.762Z,1520517812.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:33.140Z,1520517813.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:33.532Z,1520517813.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:33.927Z,1520517813.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:34.329Z,1520517814.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:34.734Z,1520517814.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:35.136Z,1520517815.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:35.533Z,1520517815.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:35.926Z,1520517815.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:36.327Z,1520517816.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:36.732Z,1520517816.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:37.136Z,1520517817.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:37.542Z,1520517817.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:37.934Z,1520517817.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:38.334Z,1520517818.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:38.736Z,1520517818.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:39.136Z,1520517819.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:39.535Z,1520517819.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:39.931Z,1520517819.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:40.331Z,1520517820.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:40.736Z,1520517820.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:41.136Z,1520517821.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:41.535Z,1520517821.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:41.931Z,1520517821.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:42.331Z,1520517822.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:42.735Z,1520517822.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:43.136Z,1520517823.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:43.536Z,1520517823.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:43.932Z,1520517823.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:44.330Z,1520517824.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:44.736Z,1520517824.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:45.144Z,1520517825.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:45.539Z,1520517825.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:45.932Z,1520517825.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:46.334Z,1520517826.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:46.740Z,1520517826.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:47.140Z,1520517827.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:47.547Z,1520517827.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:47.931Z,1520517827.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:48.330Z,1520517828.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:48.739Z,1520517828.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:49.139Z,1520517829.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:49.542Z,1520517829.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:49.927Z,1520517829.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:50.330Z,1520517830.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:50.740Z,1520517830.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:51.139Z,1520517831.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:51.546Z,1520517831.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:51.932Z,1520517831.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:52.334Z,1520517832.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:52.735Z,1520517832.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:53.139Z,1520517833.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:53.546Z,1520517833.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:53.931Z,1520517833.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:54.330Z,1520517834.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:54.740Z,1520517834.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:55.142Z,1520517835.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:55.540Z,1520517835.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:55.927Z,1520517835.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:56.327Z,1520517836.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:56.740Z,1520517836.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:57.146Z,1520517837.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:57.539Z,1520517837.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:57.934Z,1520517837.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:58.329Z,1520517838.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:58.737Z,1520517838.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:59.142Z,1520517839.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:59.541Z,1520517839.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:03:59.937Z,1520517839.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:00.340Z,1520517840.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:00.742Z,1520517840.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:01.140Z,1520517841.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:01.542Z,1520517841.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:01.933Z,1520517841.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:02.333Z,1520517842.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:02.752Z,1520517842.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:03.139Z,1520517843.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:03.549Z,1520517843.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:03.937Z,1520517843.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:04.333Z,1520517844.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:04.737Z,1520517844.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:05.145Z,1520517845.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:05.537Z,1520517845.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:05.933Z,1520517845.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:06.340Z,1520517846.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:06.738Z,1520517846.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:07.141Z,1520517847.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:07.537Z,1520517847.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:07.932Z,1520517847.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:08.334Z,1520517848.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:08.750Z,1520517848.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:09.156Z,1520517849.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:09.556Z,1520517849.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:09.937Z,1520517849.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:10.327Z,1520517850.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:10.741Z,1520517850.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:11.140Z,1520517851.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:11.536Z,1520517851.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:11.928Z,1520517851.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:12.329Z,1520517852.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:12.736Z,1520517852.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:13.141Z,1520517853.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:13.540Z,1520517853.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:13.932Z,1520517853.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:14.334Z,1520517854.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:14.740Z,1520517854.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:15.137Z,1520517855.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:15.537Z,1520517855.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:15.931Z,1520517855.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:16.327Z,1520517856.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:16.736Z,1520517856.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:17.136Z,1520517857.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:17.538Z,1520517857.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:17.929Z,1520517857.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:18.329Z,1520517858.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:18.737Z,1520517858.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:19.139Z,1520517859.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:22.839Z,1520517862.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:23.054Z,1520517863.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:23.422Z,1520517863.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:23.823Z,1520517863.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:24.221Z,1520517864.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:24.616Z,1520517864.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:25.031Z,1520517865.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:25.429Z,1520517865.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:25.826Z,1520517865.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:26.256Z,1520517866.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:26.616Z,1520517866.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:27.020Z,1520517867.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:27.426Z,1520517867.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:27.849Z,1520517867.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:28.242Z,1520517868.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:28.631Z,1520517868.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:29.027Z,1520517869.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:29.437Z,1520517869.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:29.806Z,1520517869.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:30.235Z,1520517870.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:30.612Z,1520517870.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:31.034Z,1520517871.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:31.435Z,1520517871.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:31.844Z,1520517871.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:32.214Z,1520517872.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:32.611Z,1520517872.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:33.034Z,1520517873.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:33.447Z,1520517873.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:33.839Z,1520517873.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:34.237Z,1520517874.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:34.640Z,1520517874.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:35.017Z,1520517875.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:35.438Z,1520517875.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:35.813Z,1520517875.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:36.214Z,1520517876.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:36.617Z,1520517876.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:37.087Z,1520517877.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:37.441Z,1520517877.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:37.820Z,1520517877.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:38.212Z,1520517878.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:38.620Z,1520517878.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:39.048Z,1520517879.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:39.415Z,1520517879.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:39.821Z,1520517879.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:40.226Z,1520517880.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:40.622Z,1520517880.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:41.011Z,1520517881.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:41.422Z,1520517881.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:41.817Z,1520517881.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:42.256Z,1520517882.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:42.614Z,1520517882.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:43.067Z,1520517883.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:43.421Z,1520517883.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:43.846Z,1520517883.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:44.254Z,1520517884.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:44.614Z,1520517884.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:45.020Z,1520517885.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:45.447Z,1520517885.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:45.850Z,1520517885.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:46.242Z,1520517886.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:46.623Z,1520517886.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:47.031Z,1520517887.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:47.415Z,1520517887.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:47.859Z,1520517887.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:48.227Z,1520517888.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:48.630Z,1520517888.630 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:48.630Z,1520517888.630 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 127
2018-03-08T14:04:48.630Z,1520517888.630 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T14:04:48.632Z,1520517888.632 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:48.632Z,1520517888.632 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 127
2018-03-08T14:04:48.632Z,1520517888.632 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T14:04:48.634Z,1520517888.634 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:48.634Z,1520517888.634 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 127
2018-03-08T14:04:48.634Z,1520517888.634 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T14:04:48.670Z,1520517888.670 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T14:04:48.670Z,1520517888.670 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T14:04:48.670Z,1520517888.670 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T14:04:49.093Z,1520517889.093 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T14:04:49.093Z,1520517889.093 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 127
2018-03-08T14:04:49.094Z,1520517889.094 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T14:04:49.094Z,1520517889.094 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 127
2018-03-08T14:04:49.094Z,1520517889.094 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T14:04:49.095Z,1520517889.095 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 127
2018-03-08T14:04:49.432Z,1520517889.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T14:04:49.432Z,1520517889.432 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:04:49.433Z,1520517889.433 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:04:49.433Z,1520517889.433 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T14:04:49.433Z,1520517889.433 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:04:49.434Z,1520517889.434 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:04:49.434Z,1520517889.434 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T14:04:49.434Z,1520517889.434 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:04:49.435Z,1520517889.435 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:04:49.838Z,1520517889.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T14:04:49.839Z,1520517889.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:50.206Z,1520517890.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T14:04:50.207Z,1520517890.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:50.630Z,1520517890.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T14:04:50.631Z,1520517890.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:51.037Z,1520517891.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T14:04:51.038Z,1520517891.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:51.411Z,1520517891.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T14:04:51.412Z,1520517891.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:51.832Z,1520517891.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T14:04:51.833Z,1520517891.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:52.232Z,1520517892.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T14:04:52.234Z,1520517892.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:52.638Z,1520517892.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T14:04:52.639Z,1520517892.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:53.014Z,1520517893.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T14:04:53.015Z,1520517893.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:53.415Z,1520517893.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T14:04:53.415Z,1520517893.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:53.814Z,1520517893.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T14:04:53.815Z,1520517893.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:54.217Z,1520517894.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T14:04:54.218Z,1520517894.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:54.612Z,1520517894.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T14:04:54.613Z,1520517894.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:55.020Z,1520517895.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T14:04:55.021Z,1520517895.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:55.443Z,1520517895.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T14:04:55.444Z,1520517895.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:55.820Z,1520517895.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T14:04:55.821Z,1520517895.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:56.248Z,1520517896.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T14:04:56.249Z,1520517896.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:56.618Z,1520517896.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T14:04:56.619Z,1520517896.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:57.015Z,1520517897.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T14:04:57.016Z,1520517897.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:57.418Z,1520517897.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T14:04:57.419Z,1520517897.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:57.853Z,1520517897.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T14:04:57.854Z,1520517897.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:58.250Z,1520517898.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T14:04:58.251Z,1520517898.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:58.630Z,1520517898.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T14:04:58.631Z,1520517898.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:59.014Z,1520517899.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T14:04:59.015Z,1520517899.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:59.417Z,1520517899.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T14:04:59.418Z,1520517899.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:04:59.822Z,1520517899.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T14:04:59.823Z,1520517899.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:00.222Z,1520517900.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T14:05:00.223Z,1520517900.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:00.613Z,1520517900.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T14:05:00.614Z,1520517900.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:01.026Z,1520517901.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T14:05:01.027Z,1520517901.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:01.420Z,1520517901.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T14:05:01.421Z,1520517901.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:01.824Z,1520517901.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T14:05:01.825Z,1520517901.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:02.222Z,1520517902.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T14:05:02.223Z,1520517902.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:02.615Z,1520517902.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T14:05:02.621Z,1520517902.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:03.019Z,1520517903.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T14:05:03.020Z,1520517903.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:03.420Z,1520517903.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T14:05:03.421Z,1520517903.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:03.824Z,1520517903.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T14:05:03.829Z,1520517903.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:04.238Z,1520517904.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T14:05:04.239Z,1520517904.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:04.632Z,1520517904.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T14:05:04.633Z,1520517904.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:05.021Z,1520517905.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T14:05:05.022Z,1520517905.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:05.418Z,1520517905.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T14:05:05.419Z,1520517905.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:05.814Z,1520517905.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T14:05:05.815Z,1520517905.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:06.215Z,1520517906.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T14:05:06.216Z,1520517906.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:06.621Z,1520517906.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T14:05:06.622Z,1520517906.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:07.029Z,1520517907.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T14:05:07.030Z,1520517907.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:07.427Z,1520517907.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T14:05:07.429Z,1520517907.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:07.824Z,1520517907.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T14:05:07.825Z,1520517907.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:08.218Z,1520517908.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T14:05:08.219Z,1520517908.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:08.621Z,1520517908.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T14:05:08.622Z,1520517908.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:09.021Z,1520517909.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:09.418Z,1520517909.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:09.825Z,1520517909.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:10.228Z,1520517910.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:10.631Z,1520517910.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:11.014Z,1520517911.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:11.421Z,1520517911.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:11.819Z,1520517911.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:12.221Z,1520517912.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:12.615Z,1520517912.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:13.028Z,1520517913.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:13.424Z,1520517913.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:13.824Z,1520517913.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:14.226Z,1520517914.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:14.625Z,1520517914.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:15.023Z,1520517915.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:15.421Z,1520517915.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:15.824Z,1520517915.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:16.228Z,1520517916.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:16.628Z,1520517916.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:17.022Z,1520517917.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:17.425Z,1520517917.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:17.802Z,1520517917.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:18.208Z,1520517918.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:18.631Z,1520517918.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:19.037Z,1520517919.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:19.436Z,1520517919.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:22.539Z,1520517922.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:22.679Z,1520517922.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:23.014Z,1520517923.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:23.412Z,1520517923.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:23.813Z,1520517923.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:24.249Z,1520517924.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:24.636Z,1520517924.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:25.026Z,1520517925.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:25.419Z,1520517925.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:25.817Z,1520517925.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:26.211Z,1520517926.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:26.621Z,1520517926.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:27.082Z,1520517927.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:27.426Z,1520517927.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:27.830Z,1520517927.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:28.216Z,1520517928.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:28.614Z,1520517928.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:29.012Z,1520517929.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:29.421Z,1520517929.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:29.829Z,1520517929.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:30.261Z,1520517930.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:30.629Z,1520517930.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:31.018Z,1520517931.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:31.450Z,1520517931.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:31.823Z,1520517931.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:32.223Z,1520517932.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:32.636Z,1520517932.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:33.028Z,1520517933.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:33.427Z,1520517933.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:33.827Z,1520517933.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:34.228Z,1520517934.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:34.639Z,1520517934.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:35.021Z,1520517935.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:35.415Z,1520517935.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:35.822Z,1520517935.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:36.233Z,1520517936.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:36.651Z,1520517936.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:37.017Z,1520517937.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:37.413Z,1520517937.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:37.821Z,1520517937.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:38.216Z,1520517938.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:38.615Z,1520517938.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:39.021Z,1520517939.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:39.422Z,1520517939.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:39.820Z,1520517939.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:40.212Z,1520517940.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:40.615Z,1520517940.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:41.017Z,1520517941.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:41.415Z,1520517941.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:41.813Z,1520517941.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:42.241Z,1520517942.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:42.617Z,1520517942.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:43.016Z,1520517943.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:43.413Z,1520517943.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:43.811Z,1520517943.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:44.215Z,1520517944.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:44.614Z,1520517944.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:45.017Z,1520517945.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:45.426Z,1520517945.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:45.826Z,1520517945.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:46.222Z,1520517946.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:46.607Z,1520517946.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:47.012Z,1520517947.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:47.411Z,1520517947.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:47.821Z,1520517947.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:48.219Z,1520517948.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:48.626Z,1520517948.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:49.018Z,1520517949.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:49.418Z,1520517949.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:49.815Z,1520517949.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:50.215Z,1520517950.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:50.611Z,1520517950.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:51.026Z,1520517951.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:51.426Z,1520517951.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:51.827Z,1520517951.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:52.218Z,1520517952.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:52.611Z,1520517952.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:53.018Z,1520517953.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:53.414Z,1520517953.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:53.826Z,1520517953.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:54.226Z,1520517954.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:54.621Z,1520517954.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:55.019Z,1520517955.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:55.423Z,1520517955.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:55.818Z,1520517955.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:56.222Z,1520517956.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:56.618Z,1520517956.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:57.022Z,1520517957.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:57.429Z,1520517957.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:57.822Z,1520517957.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:58.221Z,1520517958.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:58.622Z,1520517958.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:59.017Z,1520517959.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:59.421Z,1520517959.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:05:59.825Z,1520517959.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:00.225Z,1520517960.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:00.625Z,1520517960.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:01.029Z,1520517961.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:01.420Z,1520517961.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:01.823Z,1520517961.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:02.223Z,1520517962.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:02.625Z,1520517962.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:03.034Z,1520517963.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:03.438Z,1520517963.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:03.834Z,1520517963.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:04.202Z,1520517964.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:04.608Z,1520517964.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:05.009Z,1520517965.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:05.447Z,1520517965.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:05.835Z,1520517965.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:06.243Z,1520517966.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:06.616Z,1520517966.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:07.013Z,1520517967.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:07.410Z,1520517967.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:07.807Z,1520517967.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:08.241Z,1520517968.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:08.611Z,1520517968.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:09.043Z,1520517969.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:09.440Z,1520517969.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:09.812Z,1520517969.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:10.211Z,1520517970.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:10.649Z,1520517970.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:11.019Z,1520517971.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:11.414Z,1520517971.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:11.825Z,1520517971.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:12.223Z,1520517972.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:12.624Z,1520517972.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:13.022Z,1520517973.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:13.421Z,1520517973.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:13.854Z,1520517973.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:14.222Z,1520517974.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:14.618Z,1520517974.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:15.022Z,1520517975.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:15.451Z,1520517975.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:15.854Z,1520517975.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:16.222Z,1520517976.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:16.614Z,1520517976.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:17.050Z,1520517977.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:17.416Z,1520517977.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:17.823Z,1520517977.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:18.224Z,1520517978.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:18.655Z,1520517978.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:19.014Z,1520517979.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:19.458Z,1520517979.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:19.820Z,1520517979.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:23.278Z,1520517983.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:23.438Z,1520517983.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:23.800Z,1520517983.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:24.202Z,1520517984.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:24.610Z,1520517984.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:24.976Z,1520517984.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:25.386Z,1520517985.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:25.782Z,1520517985.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:26.178Z,1520517986.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:26.576Z,1520517986.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:26.989Z,1520517986.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:27.388Z,1520517987.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:27.788Z,1520517987.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:28.183Z,1520517988.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:28.582Z,1520517988.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:28.979Z,1520517988.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:29.379Z,1520517989.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:29.804Z,1520517989.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:30.201Z,1520517990.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:30.594Z,1520517990.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:30.996Z,1520517990.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:31.366Z,1520517991.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:31.772Z,1520517991.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:32.172Z,1520517992.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:32.572Z,1520517992.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:33.023Z,1520517993.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:33.380Z,1520517993.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:33.780Z,1520517993.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:34.174Z,1520517994.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:34.575Z,1520517994.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:34.975Z,1520517994.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:35.390Z,1520517995.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:35.785Z,1520517995.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:36.190Z,1520517996.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:36.584Z,1520517996.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:36.975Z,1520517996.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:37.377Z,1520517997.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:37.793Z,1520517997.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:38.176Z,1520517998.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:38.577Z,1520517998.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:38.984Z,1520517998.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:39.383Z,1520517999.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:39.784Z,1520517999.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:40.201Z,1520518000.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:40.578Z,1520518000.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:40.979Z,1520518000.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:41.381Z,1520518001.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:41.790Z,1520518001.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:42.193Z,1520518002.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:42.592Z,1520518002.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:43.024Z,1520518003.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:43.377Z,1520518003.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:43.782Z,1520518003.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:44.179Z,1520518004.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:44.576Z,1520518004.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:44.989Z,1520518004.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:45.393Z,1520518005.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:45.804Z,1520518005.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:46.174Z,1520518006.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:46.578Z,1520518006.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:46.985Z,1520518006.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:47.377Z,1520518007.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:47.829Z,1520518007.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:48.199Z,1520518008.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:48.589Z,1520518008.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:48.978Z,1520518008.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:49.377Z,1520518009.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:49.776Z,1520518009.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:50.184Z,1520518010.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:50.577Z,1520518010.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:50.998Z,1520518010.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:51.443Z,1520518011.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:51.794Z,1520518011.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:52.197Z,1520518012.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:52.588Z,1520518012.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:52.989Z,1520518012.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:53.385Z,1520518013.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:53.797Z,1520518013.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:54.199Z,1520518014.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:54.594Z,1520518014.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:54.984Z,1520518014.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:55.387Z,1520518015.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:55.787Z,1520518015.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:56.195Z,1520518016.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:56.567Z,1520518016.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:56.991Z,1520518016.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:57.401Z,1520518017.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:57.772Z,1520518017.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:58.167Z,1520518018.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:58.566Z,1520518018.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:58.975Z,1520518018.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:59.373Z,1520518019.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:06:59.804Z,1520518019.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:00.180Z,1520518020.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:00.584Z,1520518020.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:00.982Z,1520518020.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:01.374Z,1520518021.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:01.774Z,1520518021.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:02.175Z,1520518022.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:02.575Z,1520518022.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:02.980Z,1520518022.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:03.380Z,1520518023.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:03.777Z,1520518023.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:04.173Z,1520518024.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:04.575Z,1520518024.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:04.975Z,1520518024.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:05.374Z,1520518025.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:05.777Z,1520518025.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:06.175Z,1520518026.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:06.580Z,1520518026.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:06.974Z,1520518026.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:07.375Z,1520518027.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:07.773Z,1520518027.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:08.175Z,1520518028.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:08.576Z,1520518028.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:08.980Z,1520518028.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:09.380Z,1520518029.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:09.776Z,1520518029.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:10.174Z,1520518030.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:10.575Z,1520518030.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:10.975Z,1520518030.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:11.378Z,1520518031.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:11.780Z,1520518031.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:12.176Z,1520518032.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:12.580Z,1520518032.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:12.974Z,1520518032.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:13.375Z,1520518033.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:13.773Z,1520518033.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:14.175Z,1520518034.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:14.573Z,1520518034.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:14.980Z,1520518034.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:15.386Z,1520518035.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:15.786Z,1520518035.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:16.186Z,1520518036.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:16.576Z,1520518036.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:16.976Z,1520518036.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:17.375Z,1520518037.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:17.784Z,1520518037.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:18.193Z,1520518038.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:18.589Z,1520518038.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:18.994Z,1520518038.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:19.381Z,1520518039.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:19.786Z,1520518039.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:20.211Z,1520518040.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:23.897Z,1520518043.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:23.900Z,1520518043.900 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T14:02:22.2Z
2018-03-08T14:07:23.901Z,1520518043.901 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T14:07:23.901Z,1520518043.901 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T14:07:24.050Z,1520518044.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:24.436Z,1520518044.436 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20180308T074127/Courier0148.lzma
2018-03-08T14:07:24.510Z,1520518044.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:24.804Z,1520518044.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:25.143Z,1520518045.143 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0148.lzma.bak
2018-03-08T14:07:25.143Z,1520518045.143 [DataOverHttps](INFO): SBD MOMSN=7986309
2018-03-08T14:07:25.238Z,1520518045.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:25.765Z,1520518045.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:26.006Z,1520518046.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:31.117Z,1520518051.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:31.263Z,1520518051.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:31.632Z,1520518051.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:32.033Z,1520518052.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:32.434Z,1520518052.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:32.838Z,1520518052.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:33.244Z,1520518053.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:36.426Z,1520518056.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:36.598Z,1520518056.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:36.966Z,1520518056.966 [DataOverHttps](INFO): Sending 286 bytes from file Logs/20180308T074127/Express0149.lzma
2018-03-08T14:07:37.067Z,1520518057.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:37.349Z,1520518057.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:37.659Z,1520518057.659 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0149.lzma.bak
2018-03-08T14:07:37.659Z,1520518057.659 [DataOverHttps](INFO): SBD MOMSN=7986311
2018-03-08T14:07:37.766Z,1520518057.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:38.378Z,1520518058.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:38.381Z,1520518058.381 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T14:07:38.381Z,1520518058.381 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T14:07:38.381Z,1520518058.381 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T14:07:38.575Z,1520518058.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:41.839Z,1520518061.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:41.958Z,1520518061.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:42.332Z,1520518062.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:42.709Z,1520518062.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:43.111Z,1520518063.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:43.507Z,1520518063.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:43.941Z,1520518063.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:44.320Z,1520518064.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:44.724Z,1520518064.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:45.115Z,1520518065.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:45.513Z,1520518065.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:45.915Z,1520518065.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:46.315Z,1520518066.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:46.717Z,1520518066.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:47.127Z,1520518067.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:47.521Z,1520518067.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:47.915Z,1520518067.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:48.310Z,1520518068.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:48.674Z,1520518068.674 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T14:07:48.674Z,1520518068.674 [NAL9602] Data Fault, FailCount= 1
2018-03-08T14:07:48.674Z,1520518068.674 [NAL9602](ERROR): Data Fault
2018-03-08T14:07:48.726Z,1520518068.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:48.751Z,1520518068.751 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T14:07:49.066Z,1520518069.066 [NAL9602](INFO): Powering down
2018-03-08T14:07:49.114Z,1520518069.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:49.519Z,1520518069.519 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:49.519Z,1520518069.519 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 128
2018-03-08T14:07:49.519Z,1520518069.519 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T14:07:49.521Z,1520518069.521 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:49.521Z,1520518069.521 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 128
2018-03-08T14:07:49.521Z,1520518069.521 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T14:07:49.523Z,1520518069.523 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:49.523Z,1520518069.523 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 128
2018-03-08T14:07:49.523Z,1520518069.523 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T14:07:49.565Z,1520518069.565 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T14:07:49.565Z,1520518069.565 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T14:07:49.565Z,1520518069.565 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T14:07:49.918Z,1520518069.918 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T14:07:49.918Z,1520518069.918 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 128
2018-03-08T14:07:49.919Z,1520518069.919 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T14:07:49.919Z,1520518069.919 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 128
2018-03-08T14:07:49.919Z,1520518069.919 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T14:07:49.919Z,1520518069.919 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 128
2018-03-08T14:07:49.920Z,1520518069.920 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T14:07:49.920Z,1520518069.920 [NAL9602] No Fault, FailCount= 1
2018-03-08T14:07:50.316Z,1520518070.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T14:07:50.317Z,1520518070.317 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:07:50.317Z,1520518070.317 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:07:50.318Z,1520518070.318 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T14:07:50.318Z,1520518070.318 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:07:50.318Z,1520518070.318 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:07:50.319Z,1520518070.319 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T14:07:50.319Z,1520518070.319 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:07:50.319Z,1520518070.319 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:07:50.710Z,1520518070.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T14:07:50.711Z,1520518070.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:51.107Z,1520518071.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T14:07:51.108Z,1520518071.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:51.514Z,1520518071.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T14:07:51.515Z,1520518071.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:51.916Z,1520518071.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T14:07:51.917Z,1520518071.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:52.315Z,1520518072.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T14:07:52.316Z,1520518072.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:52.714Z,1520518072.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T14:07:52.715Z,1520518072.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:53.116Z,1520518073.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T14:07:53.117Z,1520518073.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:53.515Z,1520518073.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T14:07:53.516Z,1520518073.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:53.914Z,1520518073.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T14:07:53.915Z,1520518073.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:54.317Z,1520518074.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T14:07:54.317Z,1520518074.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:54.694Z,1520518074.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T14:07:54.695Z,1520518074.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:55.117Z,1520518075.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T14:07:55.118Z,1520518075.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:55.500Z,1520518075.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T14:07:55.501Z,1520518075.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:55.901Z,1520518075.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T14:07:55.902Z,1520518075.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:56.306Z,1520518076.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T14:07:56.307Z,1520518076.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:56.733Z,1520518076.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T14:07:56.734Z,1520518076.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:57.097Z,1520518077.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T14:07:57.098Z,1520518077.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:57.506Z,1520518077.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T14:07:57.507Z,1520518077.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:57.930Z,1520518077.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T14:07:57.931Z,1520518077.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:58.301Z,1520518078.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T14:07:58.302Z,1520518078.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:58.744Z,1520518078.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T14:07:58.745Z,1520518078.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:59.108Z,1520518079.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T14:07:59.109Z,1520518079.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:59.501Z,1520518079.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T14:07:59.502Z,1520518079.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:07:59.918Z,1520518079.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T14:07:59.919Z,1520518079.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:00.316Z,1520518080.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T14:08:00.317Z,1520518080.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:00.719Z,1520518080.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T14:08:00.720Z,1520518080.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:01.115Z,1520518081.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T14:08:01.116Z,1520518081.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:01.516Z,1520518081.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T14:08:01.517Z,1520518081.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:01.894Z,1520518081.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T14:08:01.895Z,1520518081.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:02.313Z,1520518082.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T14:08:02.314Z,1520518082.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:02.701Z,1520518082.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T14:08:02.702Z,1520518082.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:03.095Z,1520518083.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T14:08:03.096Z,1520518083.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:03.521Z,1520518083.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T14:08:03.522Z,1520518083.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:03.922Z,1520518083.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T14:08:03.923Z,1520518083.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:04.324Z,1520518084.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T14:08:04.325Z,1520518084.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:04.704Z,1520518084.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T14:08:04.721Z,1520518084.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:05.106Z,1520518085.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T14:08:05.107Z,1520518085.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:05.505Z,1520518085.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T14:08:05.506Z,1520518085.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:05.903Z,1520518085.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T14:08:05.904Z,1520518085.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:06.333Z,1520518086.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T14:08:06.334Z,1520518086.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:06.701Z,1520518086.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T14:08:06.702Z,1520518086.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:07.134Z,1520518087.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T14:08:07.135Z,1520518087.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:07.514Z,1520518087.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T14:08:07.515Z,1520518087.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:07.901Z,1520518087.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T14:08:07.902Z,1520518087.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:08.314Z,1520518088.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T14:08:08.315Z,1520518088.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:08.710Z,1520518088.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T14:08:08.711Z,1520518088.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:09.105Z,1520518089.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T14:08:09.106Z,1520518089.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:09.511Z,1520518089.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T14:08:09.512Z,1520518089.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:09.910Z,1520518089.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:10.305Z,1520518090.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:10.710Z,1520518090.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:11.110Z,1520518091.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:11.509Z,1520518091.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:11.909Z,1520518091.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:12.310Z,1520518092.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:12.705Z,1520518092.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:13.110Z,1520518093.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:13.545Z,1520518093.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:13.908Z,1520518093.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:14.308Z,1520518094.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:14.709Z,1520518094.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:15.110Z,1520518095.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:15.506Z,1520518095.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:15.910Z,1520518095.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:16.306Z,1520518096.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:16.710Z,1520518096.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:17.116Z,1520518097.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:17.550Z,1520518097.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:17.916Z,1520518097.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:18.326Z,1520518098.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:18.713Z,1520518098.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:19.074Z,1520518099.074 [NAL9602](INFO): Powering up NAL9602
2018-03-08T14:08:19.118Z,1520518099.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:19.513Z,1520518099.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:19.910Z,1520518099.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:20.314Z,1520518100.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:20.730Z,1520518100.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:21.115Z,1520518101.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:21.562Z,1520518101.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:21.912Z,1520518101.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:22.316Z,1520518102.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:22.712Z,1520518102.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:23.122Z,1520518103.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:23.520Z,1520518103.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:23.925Z,1520518103.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:24.318Z,1520518104.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:24.733Z,1520518104.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:25.123Z,1520518105.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:25.526Z,1520518105.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:25.919Z,1520518105.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:26.317Z,1520518106.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:26.721Z,1520518106.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:27.125Z,1520518107.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:27.499Z,1520518107.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:27.939Z,1520518107.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:28.301Z,1520518108.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:28.731Z,1520518108.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:29.115Z,1520518109.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:29.506Z,1520518109.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:29.932Z,1520518109.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:30.270Z,1520518110.270 [NAL9602](INFO): NAL9602 initialized
2018-03-08T14:08:30.316Z,1520518110.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:30.753Z,1520518110.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:31.131Z,1520518111.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:31.528Z,1520518111.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:31.927Z,1520518111.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:32.302Z,1520518112.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:32.726Z,1520518112.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:33.103Z,1520518113.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:33.503Z,1520518113.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:33.928Z,1520518113.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:34.329Z,1520518114.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:34.779Z,1520518114.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:35.106Z,1520518115.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:35.504Z,1520518115.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:35.909Z,1520518115.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:36.344Z,1520518116.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:36.747Z,1520518116.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:37.115Z,1520518117.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:37.520Z,1520518117.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:37.916Z,1520518117.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:38.314Z,1520518118.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:38.718Z,1520518118.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:39.116Z,1520518119.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:43.161Z,1520518123.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:43.304Z,1520518123.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:43.674Z,1520518123.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:44.057Z,1520518124.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:44.435Z,1520518124.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:44.831Z,1520518124.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:45.250Z,1520518125.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:45.629Z,1520518125.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:46.032Z,1520518126.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:46.442Z,1520518126.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:46.862Z,1520518126.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:47.235Z,1520518127.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:47.642Z,1520518127.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:48.034Z,1520518128.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:48.430Z,1520518128.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:48.831Z,1520518128.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:49.235Z,1520518129.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:49.645Z,1520518129.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:50.041Z,1520518130.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:50.435Z,1520518130.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:50.832Z,1520518130.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:51.231Z,1520518131.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:51.633Z,1520518131.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:52.047Z,1520518132.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:52.448Z,1520518132.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:52.847Z,1520518132.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:53.235Z,1520518133.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:53.639Z,1520518133.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:54.034Z,1520518134.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:54.434Z,1520518134.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:54.842Z,1520518134.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:55.241Z,1520518135.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:55.654Z,1520518135.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:56.095Z,1520518136.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:56.431Z,1520518136.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:56.837Z,1520518136.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:57.238Z,1520518137.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:57.675Z,1520518137.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:58.046Z,1520518138.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:58.500Z,1520518138.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:58.852Z,1520518138.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:59.241Z,1520518139.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:08:59.637Z,1520518139.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:00.053Z,1520518140.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:00.446Z,1520518140.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:00.847Z,1520518140.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:01.240Z,1520518141.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:01.659Z,1520518141.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:02.048Z,1520518142.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:02.451Z,1520518142.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:02.834Z,1520518142.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:03.258Z,1520518143.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:03.622Z,1520518143.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:04.052Z,1520518144.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:04.458Z,1520518144.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:04.828Z,1520518144.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:05.234Z,1520518145.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:05.630Z,1520518145.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:06.026Z,1520518146.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:06.436Z,1520518146.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:06.870Z,1520518146.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:07.235Z,1520518147.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:07.642Z,1520518147.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:08.042Z,1520518148.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:08.434Z,1520518148.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:08.836Z,1520518148.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:09.236Z,1520518149.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:09.685Z,1520518149.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:10.048Z,1520518150.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:10.450Z,1520518150.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:10.842Z,1520518150.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:11.277Z,1520518151.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:11.670Z,1520518151.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:12.033Z,1520518152.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:12.435Z,1520518152.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:12.840Z,1520518152.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:13.244Z,1520518153.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:13.650Z,1520518153.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:14.062Z,1520518154.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:14.442Z,1520518154.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:14.842Z,1520518154.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:15.240Z,1520518155.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:15.636Z,1520518155.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:16.045Z,1520518156.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:16.443Z,1520518156.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:16.849Z,1520518156.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:17.241Z,1520518157.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:17.617Z,1520518157.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:18.043Z,1520518158.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:18.446Z,1520518158.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:18.829Z,1520518158.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:19.228Z,1520518159.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:19.655Z,1520518159.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:20.049Z,1520518160.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:20.450Z,1520518160.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:20.834Z,1520518160.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:21.275Z,1520518161.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:21.628Z,1520518161.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:22.056Z,1520518162.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:22.459Z,1520518162.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:22.858Z,1520518162.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:23.236Z,1520518163.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:23.634Z,1520518163.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:24.029Z,1520518164.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:24.455Z,1520518164.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:24.838Z,1520518164.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:25.236Z,1520518165.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:25.636Z,1520518165.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:26.042Z,1520518166.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:26.438Z,1520518166.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:26.842Z,1520518166.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:27.244Z,1520518167.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:27.638Z,1520518167.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:28.047Z,1520518168.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:28.454Z,1520518168.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:28.849Z,1520518168.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:29.234Z,1520518169.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:29.621Z,1520518169.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:30.024Z,1520518170.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:30.447Z,1520518170.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:30.856Z,1520518170.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:31.245Z,1520518171.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:31.652Z,1520518171.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:32.061Z,1520518172.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:32.438Z,1520518172.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:32.836Z,1520518172.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:33.232Z,1520518173.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:33.627Z,1520518173.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:34.043Z,1520518174.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:34.454Z,1520518174.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:34.845Z,1520518174.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:35.245Z,1520518175.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:35.645Z,1520518175.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:36.035Z,1520518176.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:36.431Z,1520518176.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:36.831Z,1520518176.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:37.238Z,1520518177.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:37.636Z,1520518177.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:38.037Z,1520518178.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:38.433Z,1520518178.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:38.832Z,1520518178.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:39.267Z,1520518179.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:42.373Z,1520518182.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:42.515Z,1520518182.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:42.922Z,1520518182.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:43.275Z,1520518183.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:43.655Z,1520518183.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:44.044Z,1520518184.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:44.451Z,1520518184.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:44.850Z,1520518184.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:45.256Z,1520518185.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:45.655Z,1520518185.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:46.062Z,1520518186.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:46.453Z,1520518186.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:46.850Z,1520518186.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:47.250Z,1520518187.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:47.655Z,1520518187.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:48.053Z,1520518188.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:48.462Z,1520518188.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:48.862Z,1520518188.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:49.249Z,1520518189.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:49.659Z,1520518189.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:50.055Z,1520518190.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:50.454Z,1520518190.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:50.854Z,1520518190.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:51.259Z,1520518191.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:51.658Z,1520518191.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:52.066Z,1520518192.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:52.458Z,1520518192.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:52.859Z,1520518192.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:53.263Z,1520518193.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:53.661Z,1520518193.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:54.059Z,1520518194.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:54.463Z,1520518194.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:54.859Z,1520518194.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:55.259Z,1520518195.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:55.662Z,1520518195.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:56.041Z,1520518196.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:56.443Z,1520518196.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:56.842Z,1520518196.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:57.252Z,1520518197.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:57.672Z,1520518197.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:58.049Z,1520518198.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:58.446Z,1520518198.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:58.869Z,1520518198.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:59.251Z,1520518199.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:09:59.649Z,1520518199.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:00.057Z,1520518200.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:00.455Z,1520518200.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:00.857Z,1520518200.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:01.245Z,1520518201.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:01.653Z,1520518201.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:02.054Z,1520518202.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:02.459Z,1520518202.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:02.835Z,1520518202.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:03.262Z,1520518203.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:03.670Z,1520518203.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:04.059Z,1520518204.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:04.459Z,1520518204.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:04.859Z,1520518204.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:05.270Z,1520518205.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:05.646Z,1520518205.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:06.053Z,1520518206.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:06.455Z,1520518206.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:06.857Z,1520518206.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:07.250Z,1520518207.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:07.654Z,1520518207.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:08.048Z,1520518208.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:08.447Z,1520518208.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:08.849Z,1520518208.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:09.271Z,1520518209.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:09.666Z,1520518209.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:10.070Z,1520518210.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:10.439Z,1520518210.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:10.862Z,1520518210.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:11.239Z,1520518211.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:11.643Z,1520518211.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:12.066Z,1520518212.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:12.463Z,1520518212.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:12.865Z,1520518212.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:13.239Z,1520518213.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:13.647Z,1520518213.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:14.042Z,1520518214.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:14.442Z,1520518214.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:14.846Z,1520518214.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:15.248Z,1520518215.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:15.671Z,1520518215.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:16.044Z,1520518216.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:16.442Z,1520518216.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:16.841Z,1520518216.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:17.243Z,1520518217.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:17.641Z,1520518217.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:18.048Z,1520518218.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:18.450Z,1520518218.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:18.884Z,1520518218.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:19.293Z,1520518219.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:19.646Z,1520518219.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:20.043Z,1520518220.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:20.450Z,1520518220.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:20.841Z,1520518220.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:21.256Z,1520518221.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:21.662Z,1520518221.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:22.062Z,1520518222.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:22.446Z,1520518222.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:22.846Z,1520518222.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:23.251Z,1520518223.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:23.643Z,1520518223.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:24.056Z,1520518224.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:24.462Z,1520518224.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:24.858Z,1520518224.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:25.247Z,1520518225.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:25.649Z,1520518225.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:26.049Z,1520518226.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:26.448Z,1520518226.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:26.850Z,1520518226.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:27.258Z,1520518227.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:27.660Z,1520518227.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:28.058Z,1520518228.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:28.448Z,1520518228.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:28.848Z,1520518228.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:29.248Z,1520518229.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:29.658Z,1520518229.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:30.055Z,1520518230.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:30.463Z,1520518230.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:30.861Z,1520518230.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:31.231Z,1520518231.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:31.659Z,1520518231.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:32.066Z,1520518232.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:32.435Z,1520518232.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:32.859Z,1520518232.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:33.260Z,1520518233.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:33.640Z,1520518233.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:34.061Z,1520518234.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:34.439Z,1520518234.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:34.843Z,1520518234.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:35.269Z,1520518235.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:35.678Z,1520518235.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:36.050Z,1520518236.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:36.465Z,1520518236.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:36.859Z,1520518236.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:37.231Z,1520518237.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:37.657Z,1520518237.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:38.033Z,1520518238.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:38.440Z,1520518238.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:38.862Z,1520518238.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:39.267Z,1520518239.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:43.202Z,1520518243.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:43.340Z,1520518243.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:43.730Z,1520518243.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:44.107Z,1520518244.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:44.529Z,1520518244.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:44.916Z,1520518244.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:45.338Z,1520518245.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:45.735Z,1520518245.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:46.103Z,1520518246.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:46.516Z,1520518246.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:46.931Z,1520518246.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:47.313Z,1520518247.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:47.713Z,1520518247.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:48.110Z,1520518248.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:48.502Z,1520518248.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:48.918Z,1520518248.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:49.317Z,1520518249.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:49.712Z,1520518249.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:50.099Z,1520518250.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:50.507Z,1520518250.507 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:50.507Z,1520518250.507 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 129
2018-03-08T14:10:50.507Z,1520518250.507 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T14:10:50.509Z,1520518250.509 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:50.509Z,1520518250.509 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 129
2018-03-08T14:10:50.509Z,1520518250.509 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T14:10:50.511Z,1520518250.511 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:50.511Z,1520518250.511 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 129
2018-03-08T14:10:50.511Z,1520518250.511 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T14:10:50.523Z,1520518250.523 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T14:10:50.523Z,1520518250.523 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T14:10:50.524Z,1520518250.524 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T14:10:50.938Z,1520518250.938 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T14:10:50.938Z,1520518250.938 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 129
2018-03-08T14:10:50.938Z,1520518250.938 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T14:10:50.938Z,1520518250.938 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 129
2018-03-08T14:10:50.939Z,1520518250.939 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T14:10:50.939Z,1520518250.939 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 129
2018-03-08T14:10:51.314Z,1520518251.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T14:10:51.315Z,1520518251.315 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:10:51.315Z,1520518251.315 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:10:51.315Z,1520518251.315 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T14:10:51.316Z,1520518251.316 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:10:51.316Z,1520518251.316 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:10:51.316Z,1520518251.316 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T14:10:51.325Z,1520518251.325 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:10:51.326Z,1520518251.326 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:10:51.726Z,1520518251.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T14:10:51.727Z,1520518251.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:52.123Z,1520518252.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T14:10:52.124Z,1520518252.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:52.514Z,1520518252.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T14:10:52.515Z,1520518252.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:52.910Z,1520518252.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T14:10:52.911Z,1520518252.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:53.332Z,1520518253.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T14:10:53.333Z,1520518253.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:53.709Z,1520518253.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T14:10:53.710Z,1520518253.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:54.103Z,1520518254.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T14:10:54.104Z,1520518254.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:54.507Z,1520518254.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T14:10:54.508Z,1520518254.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:54.922Z,1520518254.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T14:10:54.923Z,1520518254.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:55.353Z,1520518255.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T14:10:55.354Z,1520518255.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:55.727Z,1520518255.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T14:10:55.728Z,1520518255.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:56.106Z,1520518256.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T14:10:56.107Z,1520518256.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:56.501Z,1520518256.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T14:10:56.502Z,1520518256.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:56.913Z,1520518256.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T14:10:56.914Z,1520518256.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:57.324Z,1520518257.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T14:10:57.329Z,1520518257.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:57.727Z,1520518257.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T14:10:57.728Z,1520518257.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:58.120Z,1520518258.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T14:10:58.121Z,1520518258.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:58.486Z,1520518258.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T14:10:58.487Z,1520518258.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:58.914Z,1520518258.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T14:10:58.915Z,1520518258.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:59.312Z,1520518259.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T14:10:59.313Z,1520518259.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:10:59.722Z,1520518259.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T14:10:59.723Z,1520518259.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:00.095Z,1520518260.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T14:11:00.095Z,1520518260.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:00.522Z,1520518260.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T14:11:00.523Z,1520518260.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:00.923Z,1520518260.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T14:11:00.924Z,1520518260.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:01.320Z,1520518261.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T14:11:01.321Z,1520518261.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:01.718Z,1520518261.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T14:11:01.718Z,1520518261.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:02.102Z,1520518262.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T14:11:02.103Z,1520518262.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:02.539Z,1520518262.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T14:11:02.540Z,1520518262.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:02.944Z,1520518262.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T14:11:02.949Z,1520518262.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:03.328Z,1520518263.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T14:11:03.329Z,1520518263.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:03.708Z,1520518263.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T14:11:03.709Z,1520518263.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:04.102Z,1520518264.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T14:11:04.103Z,1520518264.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:04.530Z,1520518264.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T14:11:04.531Z,1520518264.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:04.915Z,1520518264.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T14:11:04.916Z,1520518264.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:05.311Z,1520518265.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T14:11:05.312Z,1520518265.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:05.711Z,1520518265.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T14:11:05.711Z,1520518265.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:06.134Z,1520518266.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T14:11:06.135Z,1520518266.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:06.507Z,1520518266.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T14:11:06.508Z,1520518266.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:06.959Z,1520518266.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T14:11:06.959Z,1520518266.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:07.324Z,1520518267.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T14:11:07.325Z,1520518267.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:07.738Z,1520518267.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T14:11:07.739Z,1520518267.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:08.124Z,1520518268.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T14:11:08.125Z,1520518268.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:08.497Z,1520518268.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T14:11:08.498Z,1520518268.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:08.921Z,1520518268.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T14:11:08.922Z,1520518268.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:09.325Z,1520518269.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T14:11:09.326Z,1520518269.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:09.701Z,1520518269.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T14:11:09.702Z,1520518269.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:10.101Z,1520518270.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T14:11:10.102Z,1520518270.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:10.501Z,1520518270.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T14:11:10.502Z,1520518270.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:10.931Z,1520518270.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:11.326Z,1520518271.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:11.710Z,1520518271.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:12.101Z,1520518272.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:12.529Z,1520518272.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:12.906Z,1520518272.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:13.312Z,1520518273.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:13.717Z,1520518273.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:14.115Z,1520518274.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:14.509Z,1520518274.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:14.914Z,1520518274.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:15.324Z,1520518275.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:15.730Z,1520518275.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:16.110Z,1520518276.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:16.507Z,1520518276.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:16.909Z,1520518276.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:17.365Z,1520518277.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:17.730Z,1520518277.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:18.106Z,1520518278.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:18.523Z,1520518278.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:18.912Z,1520518278.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:19.331Z,1520518279.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:19.726Z,1520518279.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:20.119Z,1520518280.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:20.495Z,1520518280.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:20.922Z,1520518280.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:21.324Z,1520518281.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:21.719Z,1520518281.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:22.126Z,1520518282.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:22.487Z,1520518282.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:22.919Z,1520518282.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:23.323Z,1520518283.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:23.731Z,1520518283.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:24.123Z,1520518284.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:24.510Z,1520518284.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:24.914Z,1520518284.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:25.343Z,1520518285.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:25.718Z,1520518285.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:26.107Z,1520518286.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:26.503Z,1520518286.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:26.925Z,1520518286.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:27.331Z,1520518287.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:27.730Z,1520518287.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:28.103Z,1520518288.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:28.509Z,1520518288.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:28.918Z,1520518288.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:29.332Z,1520518289.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:29.727Z,1520518289.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:30.118Z,1520518290.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:30.493Z,1520518290.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:30.935Z,1520518290.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:31.314Z,1520518291.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:31.720Z,1520518291.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:32.122Z,1520518292.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:32.513Z,1520518292.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:32.921Z,1520518292.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:33.338Z,1520518293.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:33.739Z,1520518293.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:34.146Z,1520518294.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:34.526Z,1520518294.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:34.931Z,1520518294.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:35.332Z,1520518295.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:35.731Z,1520518295.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:36.098Z,1520518296.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:36.503Z,1520518296.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:36.907Z,1520518296.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:37.335Z,1520518297.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:37.711Z,1520518297.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:38.125Z,1520518298.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:38.501Z,1520518298.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:38.943Z,1520518298.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:39.311Z,1520518299.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:42.682Z,1520518302.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:42.802Z,1520518302.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:43.212Z,1520518303.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:43.554Z,1520518303.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:43.995Z,1520518303.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:44.404Z,1520518304.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:44.765Z,1520518304.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:45.161Z,1520518305.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:45.557Z,1520518305.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:45.958Z,1520518305.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:46.357Z,1520518306.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:46.762Z,1520518306.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:47.163Z,1520518307.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:47.578Z,1520518307.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:47.968Z,1520518307.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:48.362Z,1520518308.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:48.762Z,1520518308.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:49.157Z,1520518309.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:49.170Z,1520518309.170 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T14:11:49.562Z,1520518309.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:49.971Z,1520518309.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:50.372Z,1520518310.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:50.765Z,1520518310.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:51.162Z,1520518311.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:51.557Z,1520518311.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:51.960Z,1520518311.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:52.355Z,1520518312.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:52.756Z,1520518312.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:53.167Z,1520518313.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:53.579Z,1520518313.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:53.974Z,1520518313.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:54.361Z,1520518314.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:54.765Z,1520518314.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:55.163Z,1520518315.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:55.562Z,1520518315.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:55.970Z,1520518315.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:56.373Z,1520518316.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:56.766Z,1520518316.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:57.162Z,1520518317.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:57.562Z,1520518317.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:57.953Z,1520518317.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:58.366Z,1520518318.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:58.767Z,1520518318.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:59.167Z,1520518319.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:59.571Z,1520518319.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:11:59.978Z,1520518319.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:00.366Z,1520518320.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:00.764Z,1520518320.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:01.159Z,1520518321.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:01.546Z,1520518321.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:01.971Z,1520518321.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:02.377Z,1520518322.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:02.765Z,1520518322.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:03.174Z,1520518323.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:03.551Z,1520518323.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:03.954Z,1520518323.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:04.358Z,1520518324.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:04.752Z,1520518324.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:05.176Z,1520518325.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:05.579Z,1520518325.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:05.972Z,1520518325.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:06.355Z,1520518326.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:06.751Z,1520518326.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:07.155Z,1520518327.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:07.555Z,1520518327.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:07.982Z,1520518327.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:08.377Z,1520518328.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:08.767Z,1520518328.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:09.158Z,1520518329.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:09.559Z,1520518329.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:09.951Z,1520518329.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:10.367Z,1520518330.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:10.758Z,1520518330.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:11.160Z,1520518331.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:11.560Z,1520518331.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:11.961Z,1520518331.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:12.356Z,1520518332.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:12.755Z,1520518332.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:13.159Z,1520518333.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:13.555Z,1520518333.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:13.965Z,1520518333.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:14.365Z,1520518334.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:14.764Z,1520518334.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:15.159Z,1520518335.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:15.554Z,1520518335.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:15.955Z,1520518335.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:16.355Z,1520518336.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:16.759Z,1520518336.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:17.165Z,1520518337.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:17.565Z,1520518337.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:17.963Z,1520518337.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:18.350Z,1520518338.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:18.754Z,1520518338.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:19.155Z,1520518339.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:19.559Z,1520518339.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:19.974Z,1520518339.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:20.366Z,1520518340.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:20.768Z,1520518340.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:21.163Z,1520518341.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:21.563Z,1520518341.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:21.959Z,1520518341.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:22.358Z,1520518342.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:22.752Z,1520518342.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:23.174Z,1520518343.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:23.574Z,1520518343.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:23.968Z,1520518343.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:24.359Z,1520518344.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:24.763Z,1520518344.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:25.154Z,1520518345.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:25.558Z,1520518345.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:25.968Z,1520518345.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:26.418Z,1520518346.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:26.770Z,1520518346.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:27.163Z,1520518347.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:27.562Z,1520518347.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:27.960Z,1520518347.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:28.361Z,1520518348.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:28.766Z,1520518348.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:29.169Z,1520518349.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:29.579Z,1520518349.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:29.967Z,1520518349.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:30.360Z,1520518350.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:30.762Z,1520518350.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:31.162Z,1520518351.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:31.560Z,1520518351.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:31.968Z,1520518351.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:32.371Z,1520518352.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:32.775Z,1520518352.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:33.159Z,1520518353.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:33.563Z,1520518353.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:33.974Z,1520518353.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:34.360Z,1520518354.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:34.767Z,1520518354.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:35.178Z,1520518355.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:35.578Z,1520518355.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:35.967Z,1520518355.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:36.363Z,1520518356.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:36.782Z,1520518356.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:37.163Z,1520518357.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:37.639Z,1520518357.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:38.050Z,1520518358.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:38.422Z,1520518358.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:38.778Z,1520518358.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:38.802Z,1520518358.802 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T14:12:38.802Z,1520518358.802 [Default:CheckIn:C.Wait] Stopped
2018-03-08T14:12:38.802Z,1520518358.802 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T14:12:38.802Z,1520518358.802 [Default:CheckIn:D] Running Loop=1
2018-03-08T14:12:39.158Z,1520518359.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:39.162Z,1520518359.162 [Default:CheckIn:D] Stopped
2018-03-08T14:12:39.162Z,1520518359.162 [Default:CheckIn:E] Running Loop=1
2018-03-08T14:12:39.553Z,1520518359.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:39.556Z,1520518359.556 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 386.905957 min 
2018-03-08T14:12:39.556Z,1520518359.556 [Default:CheckIn:E] Stopped
2018-03-08T14:12:39.557Z,1520518359.557 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T14:12:39.557Z,1520518359.557 [Default:CheckIn] Stopped
2018-03-08T14:12:39.557Z,1520518359.557 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T14:12:39.557Z,1520518359.557 [Default:CheckIn](INFO): Running loop #38
2018-03-08T14:12:39.557Z,1520518359.557 [Default:CheckIn] Running Loop=38
2018-03-08T14:12:39.557Z,1520518359.557 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T14:12:39.557Z,1520518359.557 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T14:12:42.664Z,1520518362.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:42.822Z,1520518362.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:43.144Z,1520518363.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:43.540Z,1520518363.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:43.951Z,1520518363.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:44.351Z,1520518364.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:44.731Z,1520518364.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:45.131Z,1520518365.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:45.532Z,1520518365.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:45.967Z,1520518365.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:46.353Z,1520518366.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:46.753Z,1520518366.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:47.154Z,1520518367.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:47.538Z,1520518367.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:47.933Z,1520518367.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:48.334Z,1520518368.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:48.732Z,1520518368.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:49.144Z,1520518369.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:49.568Z,1520518369.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:49.966Z,1520518369.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:50.338Z,1520518370.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:50.736Z,1520518370.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:51.135Z,1520518371.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:51.542Z,1520518371.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:51.970Z,1520518371.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:52.350Z,1520518372.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:52.741Z,1520518372.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:53.137Z,1520518373.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:53.534Z,1520518373.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:53.934Z,1520518373.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:54.337Z,1520518374.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:54.737Z,1520518374.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:55.152Z,1520518375.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:55.543Z,1520518375.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:55.947Z,1520518375.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:56.342Z,1520518376.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:56.739Z,1520518376.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:57.142Z,1520518377.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:57.542Z,1520518377.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:57.952Z,1520518377.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:58.354Z,1520518378.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:58.747Z,1520518378.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:59.133Z,1520518379.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:59.546Z,1520518379.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:12:59.941Z,1520518379.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:00.346Z,1520518380.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:00.731Z,1520518380.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:01.144Z,1520518381.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:01.558Z,1520518381.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:01.948Z,1520518381.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:02.335Z,1520518382.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:02.744Z,1520518382.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:03.153Z,1520518383.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:03.546Z,1520518383.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:03.953Z,1520518383.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:04.359Z,1520518384.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:04.748Z,1520518384.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:05.149Z,1520518385.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:05.545Z,1520518385.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:05.945Z,1520518385.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:06.347Z,1520518386.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:06.745Z,1520518386.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:07.150Z,1520518387.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:07.549Z,1520518387.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:07.949Z,1520518387.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:08.339Z,1520518388.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:08.731Z,1520518388.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:09.136Z,1520518389.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:09.541Z,1520518389.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:09.954Z,1520518389.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:10.351Z,1520518390.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:10.794Z,1520518390.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:11.144Z,1520518391.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:11.546Z,1520518391.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:11.944Z,1520518391.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:12.343Z,1520518392.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:12.739Z,1520518392.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:13.155Z,1520518393.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:13.554Z,1520518393.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:13.954Z,1520518393.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:14.345Z,1520518394.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:14.747Z,1520518394.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:15.145Z,1520518395.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:15.546Z,1520518395.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:15.951Z,1520518395.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:16.351Z,1520518396.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:16.740Z,1520518396.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:17.129Z,1520518397.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:17.530Z,1520518397.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:17.928Z,1520518397.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:18.327Z,1520518398.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:18.734Z,1520518398.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:19.140Z,1520518399.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:19.536Z,1520518399.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:19.941Z,1520518399.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:20.348Z,1520518400.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:20.731Z,1520518400.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:21.128Z,1520518401.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:21.539Z,1520518401.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:21.950Z,1520518401.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:22.374Z,1520518402.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:22.756Z,1520518402.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:23.147Z,1520518403.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:23.540Z,1520518403.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:23.936Z,1520518403.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:24.345Z,1520518404.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:24.743Z,1520518404.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:25.147Z,1520518405.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:25.558Z,1520518405.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:25.950Z,1520518405.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:26.346Z,1520518406.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:26.752Z,1520518406.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:27.124Z,1520518407.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:27.551Z,1520518407.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:27.955Z,1520518407.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:28.355Z,1520518408.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:28.755Z,1520518408.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:29.126Z,1520518409.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:29.531Z,1520518409.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:29.954Z,1520518409.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:30.328Z,1520518410.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:30.735Z,1520518410.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:31.171Z,1520518411.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:31.585Z,1520518411.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:31.938Z,1520518411.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:32.336Z,1520518412.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:32.730Z,1520518412.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:33.132Z,1520518413.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:33.531Z,1520518413.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:33.957Z,1520518413.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:34.358Z,1520518414.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:34.755Z,1520518414.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:35.137Z,1520518415.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:35.540Z,1520518415.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:35.938Z,1520518415.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:36.356Z,1520518416.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:36.735Z,1520518416.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:37.147Z,1520518417.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:37.549Z,1520518417.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:37.946Z,1520518417.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:38.335Z,1520518418.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:38.742Z,1520518418.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:39.146Z,1520518419.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:39.535Z,1520518419.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:39.956Z,1520518419.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:43.841Z,1520518423.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:43.962Z,1520518423.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:44.338Z,1520518424.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:44.707Z,1520518424.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:45.112Z,1520518425.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:45.514Z,1520518425.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:45.911Z,1520518425.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:46.339Z,1520518426.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:46.735Z,1520518426.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:47.111Z,1520518427.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:47.515Z,1520518427.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:47.923Z,1520518427.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:48.330Z,1520518428.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:48.732Z,1520518428.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:49.126Z,1520518429.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:49.517Z,1520518429.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:49.926Z,1520518429.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:50.326Z,1520518430.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:50.724Z,1520518430.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:51.116Z,1520518431.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:51.515Z,1520518431.515 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:51.516Z,1520518431.516 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 130
2018-03-08T14:13:51.516Z,1520518431.516 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T14:13:51.518Z,1520518431.518 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:51.518Z,1520518431.518 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 130
2018-03-08T14:13:51.518Z,1520518431.518 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T14:13:51.519Z,1520518431.519 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:51.519Z,1520518431.519 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 130
2018-03-08T14:13:51.520Z,1520518431.520 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T14:13:51.531Z,1520518431.531 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T14:13:51.532Z,1520518431.532 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T14:13:51.532Z,1520518431.532 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T14:13:51.933Z,1520518431.933 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T14:13:51.933Z,1520518431.933 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 130
2018-03-08T14:13:51.933Z,1520518431.933 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T14:13:51.933Z,1520518431.933 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 130
2018-03-08T14:13:51.934Z,1520518431.934 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T14:13:51.934Z,1520518431.934 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 130
2018-03-08T14:13:52.324Z,1520518432.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T14:13:52.324Z,1520518432.324 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:13:52.329Z,1520518432.329 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:13:52.329Z,1520518432.329 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T14:13:52.329Z,1520518432.329 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:13:52.330Z,1520518432.330 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:13:52.330Z,1520518432.330 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T14:13:52.331Z,1520518432.331 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:13:52.331Z,1520518432.331 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:13:52.763Z,1520518432.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T14:13:52.764Z,1520518432.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:53.117Z,1520518433.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T14:13:53.118Z,1520518433.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:53.516Z,1520518433.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T14:13:53.517Z,1520518433.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:53.922Z,1520518433.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T14:13:53.923Z,1520518433.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:54.325Z,1520518434.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T14:13:54.326Z,1520518434.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:54.721Z,1520518434.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T14:13:54.721Z,1520518434.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:55.175Z,1520518435.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-08T14:13:55.181Z,1520518435.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:55.524Z,1520518435.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T14:13:55.525Z,1520518435.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:55.946Z,1520518435.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T14:13:55.947Z,1520518435.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:56.336Z,1520518436.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T14:13:56.341Z,1520518436.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:56.708Z,1520518436.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T14:13:56.709Z,1520518436.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:57.110Z,1520518437.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T14:13:57.111Z,1520518437.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:57.514Z,1520518437.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T14:13:57.515Z,1520518437.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:57.920Z,1520518437.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T14:13:57.937Z,1520518437.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:58.323Z,1520518438.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T14:13:58.324Z,1520518438.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:58.754Z,1520518438.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T14:13:58.755Z,1520518438.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:59.112Z,1520518439.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T14:13:59.113Z,1520518439.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:59.524Z,1520518439.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T14:13:59.545Z,1520518439.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:13:59.918Z,1520518439.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T14:13:59.919Z,1520518439.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:00.317Z,1520518440.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T14:14:00.318Z,1520518440.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:00.718Z,1520518440.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T14:14:00.719Z,1520518440.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:01.128Z,1520518441.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T14:14:01.129Z,1520518441.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:01.529Z,1520518441.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T14:14:01.530Z,1520518441.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:01.927Z,1520518441.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T14:14:01.928Z,1520518441.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:02.318Z,1520518442.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T14:14:02.319Z,1520518442.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:02.702Z,1520518442.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T14:14:02.703Z,1520518442.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:03.107Z,1520518443.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T14:14:03.108Z,1520518443.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:03.505Z,1520518443.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T14:14:03.506Z,1520518443.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:03.936Z,1520518443.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T14:14:03.937Z,1520518443.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:04.335Z,1520518444.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T14:14:04.341Z,1520518444.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:04.719Z,1520518444.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T14:14:04.720Z,1520518444.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:05.111Z,1520518445.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T14:14:05.111Z,1520518445.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:05.508Z,1520518445.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T14:14:05.509Z,1520518445.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:05.916Z,1520518445.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T14:14:05.917Z,1520518445.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:06.323Z,1520518446.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T14:14:06.345Z,1520518446.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:06.711Z,1520518446.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T14:14:06.712Z,1520518446.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:07.110Z,1520518447.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T14:14:07.111Z,1520518447.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:07.514Z,1520518447.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T14:14:07.515Z,1520518447.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:07.941Z,1520518447.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T14:14:07.942Z,1520518447.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:08.315Z,1520518448.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T14:14:08.316Z,1520518448.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:08.716Z,1520518448.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T14:14:08.717Z,1520518448.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:09.108Z,1520518449.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T14:14:09.109Z,1520518449.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:09.510Z,1520518449.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T14:14:09.511Z,1520518449.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:09.920Z,1520518449.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T14:14:09.921Z,1520518449.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:10.329Z,1520518450.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T14:14:10.330Z,1520518450.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:10.724Z,1520518450.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T14:14:10.725Z,1520518450.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:11.114Z,1520518451.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T14:14:11.115Z,1520518451.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:11.522Z,1520518451.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:11.924Z,1520518451.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:12.359Z,1520518452.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:12.761Z,1520518452.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:13.117Z,1520518453.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:13.510Z,1520518453.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:13.919Z,1520518453.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:14.310Z,1520518454.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:14.707Z,1520518454.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:15.134Z,1520518455.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:15.570Z,1520518455.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:15.920Z,1520518455.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:16.317Z,1520518456.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:16.778Z,1520518456.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:17.144Z,1520518457.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:17.508Z,1520518457.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:17.938Z,1520518457.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:18.316Z,1520518458.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:18.716Z,1520518458.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:19.111Z,1520518459.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:19.507Z,1520518459.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:19.920Z,1520518459.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:20.323Z,1520518460.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:20.716Z,1520518460.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:21.111Z,1520518461.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:21.522Z,1520518461.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:21.915Z,1520518461.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:22.349Z,1520518462.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:22.732Z,1520518462.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:23.109Z,1520518463.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:23.514Z,1520518463.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:23.938Z,1520518463.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:24.335Z,1520518464.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:24.736Z,1520518464.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:25.111Z,1520518465.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:25.507Z,1520518465.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:25.935Z,1520518465.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:26.337Z,1520518466.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:26.733Z,1520518466.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:27.116Z,1520518467.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:27.511Z,1520518467.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:27.937Z,1520518467.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:28.333Z,1520518468.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:28.724Z,1520518468.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:29.112Z,1520518469.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:29.511Z,1520518469.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:29.946Z,1520518469.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:30.317Z,1520518470.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:30.712Z,1520518470.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:31.106Z,1520518471.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:31.503Z,1520518471.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:31.917Z,1520518471.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:32.337Z,1520518472.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:32.743Z,1520518472.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:33.107Z,1520518473.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:33.506Z,1520518473.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:33.936Z,1520518473.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:34.336Z,1520518474.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:34.733Z,1520518474.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:35.118Z,1520518475.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:35.508Z,1520518475.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:35.987Z,1520518475.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:36.346Z,1520518476.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:36.755Z,1520518476.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:37.153Z,1520518477.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:37.511Z,1520518477.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:37.924Z,1520518477.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:38.329Z,1520518478.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:38.730Z,1520518478.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:39.132Z,1520518479.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:39.521Z,1520518479.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:39.919Z,1520518479.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:40.334Z,1520518480.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:44.309Z,1520518484.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:44.431Z,1520518484.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:44.779Z,1520518484.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:45.179Z,1520518485.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:45.581Z,1520518485.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:46.006Z,1520518486.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:46.408Z,1520518486.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:46.781Z,1520518486.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:47.177Z,1520518487.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:47.579Z,1520518487.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:47.976Z,1520518487.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:48.379Z,1520518488.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:48.777Z,1520518488.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:49.180Z,1520518489.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:49.584Z,1520518489.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:50.032Z,1520518490.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:50.377Z,1520518490.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:50.786Z,1520518490.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:51.180Z,1520518491.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:51.586Z,1520518491.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:51.984Z,1520518491.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:52.383Z,1520518492.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:52.790Z,1520518492.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:53.179Z,1520518493.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:53.579Z,1520518493.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:53.981Z,1520518493.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:54.381Z,1520518494.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:54.781Z,1520518494.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:55.184Z,1520518495.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:55.588Z,1520518495.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:55.984Z,1520518495.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:56.381Z,1520518496.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:56.783Z,1520518496.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:57.218Z,1520518497.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:57.586Z,1520518497.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:57.990Z,1520518497.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:58.402Z,1520518498.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:58.799Z,1520518498.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:59.192Z,1520518499.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:59.585Z,1520518499.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:14:59.964Z,1520518499.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:00.397Z,1520518500.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:00.789Z,1520518500.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:01.188Z,1520518501.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:01.592Z,1520518501.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:01.994Z,1520518501.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:02.390Z,1520518502.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:02.793Z,1520518502.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:03.207Z,1520518503.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:03.578Z,1520518503.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:03.999Z,1520518503.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:04.400Z,1520518504.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:04.784Z,1520518504.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:05.179Z,1520518505.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:05.582Z,1520518505.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:05.973Z,1520518505.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:06.383Z,1520518506.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:06.779Z,1520518506.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:07.197Z,1520518507.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:07.593Z,1520518507.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:07.998Z,1520518507.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:08.383Z,1520518508.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:08.787Z,1520518508.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:09.186Z,1520518509.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:09.579Z,1520518509.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:09.990Z,1520518509.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:10.406Z,1520518510.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:10.801Z,1520518510.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:11.208Z,1520518511.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:11.592Z,1520518511.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:11.967Z,1520518511.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:12.391Z,1520518512.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:12.800Z,1520518512.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:13.201Z,1520518513.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:13.606Z,1520518513.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:13.999Z,1520518513.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:14.379Z,1520518514.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:14.783Z,1520518514.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:15.175Z,1520518515.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:15.576Z,1520518515.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:16.008Z,1520518516.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:16.392Z,1520518516.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:16.784Z,1520518516.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:17.182Z,1520518517.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:17.583Z,1520518517.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:17.982Z,1520518517.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:18.386Z,1520518518.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:18.779Z,1520518518.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:19.185Z,1520518519.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:19.591Z,1520518519.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:19.995Z,1520518519.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:20.389Z,1520518520.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:20.791Z,1520518520.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:21.186Z,1520518521.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:21.614Z,1520518521.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:21.996Z,1520518521.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:22.396Z,1520518522.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:22.802Z,1520518522.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:23.190Z,1520518523.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:23.584Z,1520518523.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:23.981Z,1520518523.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:24.415Z,1520518524.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:24.783Z,1520518524.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:25.191Z,1520518525.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:25.602Z,1520518525.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:25.997Z,1520518525.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:26.382Z,1520518526.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:26.786Z,1520518526.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:27.186Z,1520518527.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:27.583Z,1520518527.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:28.003Z,1520518528.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:28.396Z,1520518528.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:28.793Z,1520518528.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:29.186Z,1520518529.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:29.591Z,1520518529.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:29.990Z,1520518529.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:30.389Z,1520518530.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:30.791Z,1520518530.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:31.187Z,1520518531.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:31.595Z,1520518531.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:31.991Z,1520518531.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:32.388Z,1520518532.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:32.789Z,1520518532.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:33.194Z,1520518533.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:33.589Z,1520518533.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:33.996Z,1520518533.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:34.391Z,1520518534.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:34.798Z,1520518534.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:35.185Z,1520518535.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:35.598Z,1520518535.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:35.993Z,1520518535.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:36.393Z,1520518536.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:36.799Z,1520518536.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:37.197Z,1520518537.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:37.599Z,1520518537.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:38.002Z,1520518538.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:38.390Z,1520518538.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:38.794Z,1520518538.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:39.174Z,1520518539.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:39.571Z,1520518539.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:39.998Z,1520518539.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:40.397Z,1520518540.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:43.627Z,1520518543.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:43.753Z,1520518543.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:44.139Z,1520518544.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:44.538Z,1520518544.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:44.947Z,1520518544.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:45.347Z,1520518545.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:45.751Z,1520518545.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:46.138Z,1520518546.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:46.539Z,1520518546.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:46.950Z,1520518546.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:47.358Z,1520518547.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:47.749Z,1520518547.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:48.138Z,1520518548.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:48.539Z,1520518548.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:48.959Z,1520518548.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:49.354Z,1520518549.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:49.790Z,1520518549.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:50.150Z,1520518550.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:50.543Z,1520518550.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:50.942Z,1520518550.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:51.339Z,1520518551.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:51.739Z,1520518551.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:52.139Z,1520518552.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:52.543Z,1520518552.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:52.947Z,1520518552.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:53.336Z,1520518553.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:53.731Z,1520518553.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:54.140Z,1520518554.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:54.533Z,1520518554.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:54.941Z,1520518554.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:55.341Z,1520518555.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:55.770Z,1520518555.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:56.147Z,1520518556.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:56.545Z,1520518556.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:56.944Z,1520518556.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:57.400Z,1520518557.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:57.747Z,1520518557.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:58.162Z,1520518558.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:58.550Z,1520518558.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:58.995Z,1520518558.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:59.355Z,1520518559.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:15:59.747Z,1520518559.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:00.219Z,1520518560.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:00.590Z,1520518560.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:00.969Z,1520518560.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:01.422Z,1520518561.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:01.769Z,1520518561.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:02.132Z,1520518562.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:02.544Z,1520518562.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:02.936Z,1520518562.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:03.332Z,1520518563.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:03.737Z,1520518563.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:04.142Z,1520518564.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:04.541Z,1520518564.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:04.946Z,1520518564.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:05.339Z,1520518565.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:05.771Z,1520518565.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:06.137Z,1520518566.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:06.534Z,1520518566.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:06.950Z,1520518566.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:07.345Z,1520518567.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:07.746Z,1520518567.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:08.135Z,1520518568.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:08.536Z,1520518568.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:08.939Z,1520518568.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:09.339Z,1520518569.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:09.739Z,1520518569.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:10.165Z,1520518570.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:10.549Z,1520518570.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:10.941Z,1520518570.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:11.338Z,1520518571.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:11.739Z,1520518571.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:12.137Z,1520518572.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:12.537Z,1520518572.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:12.947Z,1520518572.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:13.349Z,1520518573.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:13.751Z,1520518573.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:14.151Z,1520518574.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:14.544Z,1520518574.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:14.956Z,1520518574.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:15.370Z,1520518575.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:15.761Z,1520518575.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:16.136Z,1520518576.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:16.534Z,1520518576.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:16.939Z,1520518576.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:17.335Z,1520518577.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:17.731Z,1520518577.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:18.135Z,1520518578.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:18.561Z,1520518578.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:18.939Z,1520518578.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:19.328Z,1520518579.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:19.739Z,1520518579.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:20.134Z,1520518580.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:20.537Z,1520518580.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:20.963Z,1520518580.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:21.337Z,1520518581.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:21.762Z,1520518581.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:22.139Z,1520518582.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:22.535Z,1520518582.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:22.934Z,1520518582.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:23.339Z,1520518583.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:23.735Z,1520518583.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:24.143Z,1520518584.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:24.567Z,1520518584.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:25.003Z,1520518585.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:25.334Z,1520518585.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:25.739Z,1520518585.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:26.136Z,1520518586.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:26.532Z,1520518586.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:26.943Z,1520518586.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:27.350Z,1520518587.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:27.746Z,1520518587.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:28.135Z,1520518588.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:28.535Z,1520518588.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:28.940Z,1520518588.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:29.347Z,1520518589.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:29.787Z,1520518589.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:30.141Z,1520518590.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:30.535Z,1520518590.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:30.947Z,1520518590.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:31.340Z,1520518591.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:31.741Z,1520518591.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:32.185Z,1520518592.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:32.546Z,1520518592.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:32.951Z,1520518592.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:33.347Z,1520518593.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:33.736Z,1520518593.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:34.137Z,1520518594.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:34.548Z,1520518594.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:34.962Z,1520518594.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:35.344Z,1520518595.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:35.765Z,1520518595.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:36.124Z,1520518596.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:36.528Z,1520518596.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:36.927Z,1520518596.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:37.350Z,1520518597.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:37.760Z,1520518597.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:38.161Z,1520518598.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:38.564Z,1520518598.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:38.966Z,1520518598.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:39.329Z,1520518599.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:39.759Z,1520518599.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:40.169Z,1520518600.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:40.567Z,1520518600.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:43.737Z,1520518603.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:43.914Z,1520518603.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:44.273Z,1520518604.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:44.636Z,1520518604.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:45.123Z,1520518605.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:45.442Z,1520518605.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:45.893Z,1520518605.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:46.291Z,1520518606.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:46.658Z,1520518606.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:47.045Z,1520518607.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:47.459Z,1520518607.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:47.847Z,1520518607.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:48.260Z,1520518608.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:48.653Z,1520518608.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:49.053Z,1520518609.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:49.451Z,1520518609.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:49.850Z,1520518609.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:50.235Z,1520518610.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:50.631Z,1520518610.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:51.073Z,1520518611.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:51.480Z,1520518611.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:51.872Z,1520518611.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:52.247Z,1520518612.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:52.639Z,1520518612.639 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:52.639Z,1520518612.639 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 131
2018-03-08T14:16:52.639Z,1520518612.639 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T14:16:52.640Z,1520518612.640 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:52.641Z,1520518612.641 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 131
2018-03-08T14:16:52.641Z,1520518612.641 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T14:16:52.642Z,1520518612.642 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:52.642Z,1520518612.642 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 131
2018-03-08T14:16:52.642Z,1520518612.642 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T14:16:52.692Z,1520518612.692 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T14:16:52.697Z,1520518612.697 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T14:16:52.697Z,1520518612.697 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T14:16:53.044Z,1520518613.044 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T14:16:53.044Z,1520518613.044 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 131
2018-03-08T14:16:53.045Z,1520518613.045 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T14:16:53.045Z,1520518613.045 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 131
2018-03-08T14:16:53.046Z,1520518613.046 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T14:16:53.046Z,1520518613.046 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 131
2018-03-08T14:16:53.446Z,1520518613.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T14:16:53.447Z,1520518613.447 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:16:53.447Z,1520518613.447 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:16:53.447Z,1520518613.447 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T14:16:53.448Z,1520518613.448 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:16:53.448Z,1520518613.448 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:16:53.452Z,1520518613.452 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T14:16:53.453Z,1520518613.453 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:16:53.453Z,1520518613.453 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:16:53.842Z,1520518613.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T14:16:53.843Z,1520518613.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:54.262Z,1520518614.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T14:16:54.263Z,1520518614.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:54.670Z,1520518614.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T14:16:54.671Z,1520518614.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:55.057Z,1520518615.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T14:16:55.058Z,1520518615.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:55.456Z,1520518615.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T14:16:55.465Z,1520518615.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:55.854Z,1520518615.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T14:16:55.855Z,1520518615.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:56.274Z,1520518616.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T14:16:56.275Z,1520518616.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:56.667Z,1520518616.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T14:16:56.668Z,1520518616.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:57.062Z,1520518617.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T14:16:57.063Z,1520518617.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:57.458Z,1520518617.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T14:16:57.459Z,1520518617.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:57.859Z,1520518617.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T14:16:57.860Z,1520518617.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:58.257Z,1520518618.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T14:16:58.258Z,1520518618.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:58.662Z,1520518618.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T14:16:58.663Z,1520518618.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:59.037Z,1520518619.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T14:16:59.038Z,1520518619.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:59.440Z,1520518619.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T14:16:59.441Z,1520518619.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:16:59.835Z,1520518619.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T14:16:59.836Z,1520518619.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:00.267Z,1520518620.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T14:17:00.268Z,1520518620.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:00.647Z,1520518620.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T14:17:00.665Z,1520518620.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:01.071Z,1520518621.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T14:17:01.072Z,1520518621.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:01.436Z,1520518621.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T14:17:01.437Z,1520518621.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:01.850Z,1520518621.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T14:17:01.851Z,1520518621.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:02.242Z,1520518622.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T14:17:02.243Z,1520518622.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:02.674Z,1520518622.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T14:17:02.675Z,1520518622.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:03.044Z,1520518623.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T14:17:03.046Z,1520518623.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:03.498Z,1520518623.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T14:17:03.499Z,1520518623.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:03.874Z,1520518623.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T14:17:03.875Z,1520518623.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:04.239Z,1520518624.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T14:17:04.240Z,1520518624.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:04.642Z,1520518624.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T14:17:04.643Z,1520518624.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:05.045Z,1520518625.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T14:17:05.046Z,1520518625.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:05.439Z,1520518625.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T14:17:05.440Z,1520518625.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:05.841Z,1520518625.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T14:17:05.842Z,1520518625.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:06.254Z,1520518626.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T14:17:06.255Z,1520518626.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:06.655Z,1520518626.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T14:17:06.656Z,1520518626.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:07.052Z,1520518627.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T14:17:07.053Z,1520518627.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:07.445Z,1520518627.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T14:17:07.446Z,1520518627.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:07.842Z,1520518627.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T14:17:07.843Z,1520518627.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:08.241Z,1520518628.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T14:17:08.242Z,1520518628.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:08.637Z,1520518628.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T14:17:08.638Z,1520518628.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:09.048Z,1520518629.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T14:17:09.050Z,1520518629.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:09.454Z,1520518629.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T14:17:09.455Z,1520518629.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:09.845Z,1520518629.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T14:17:09.846Z,1520518629.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:10.245Z,1520518630.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T14:17:10.246Z,1520518630.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:10.642Z,1520518630.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T14:17:10.643Z,1520518630.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:11.045Z,1520518631.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T14:17:11.046Z,1520518631.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:11.449Z,1520518631.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T14:17:11.450Z,1520518631.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:11.842Z,1520518631.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T14:17:11.843Z,1520518631.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:12.248Z,1520518632.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T14:17:12.249Z,1520518632.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:12.655Z,1520518632.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:13.055Z,1520518633.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:13.436Z,1520518633.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:13.851Z,1520518633.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:14.242Z,1520518634.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:14.641Z,1520518634.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:15.048Z,1520518635.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:15.455Z,1520518635.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:15.847Z,1520518635.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:16.257Z,1520518636.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:16.707Z,1520518636.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:17.056Z,1520518637.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:17.459Z,1520518637.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:17.877Z,1520518637.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:18.281Z,1520518638.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:18.667Z,1520518638.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:19.067Z,1520518639.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:19.431Z,1520518639.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:19.842Z,1520518639.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:20.240Z,1520518640.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:20.642Z,1520518640.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:21.066Z,1520518641.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:21.468Z,1520518641.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:21.839Z,1520518641.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:22.239Z,1520518642.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:22.641Z,1520518642.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:23.038Z,1520518643.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:23.448Z,1520518643.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:23.842Z,1520518643.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:24.249Z,1520518644.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:24.659Z,1520518644.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:25.053Z,1520518645.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:25.443Z,1520518645.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:25.845Z,1520518645.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:26.243Z,1520518646.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:26.645Z,1520518646.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:27.048Z,1520518647.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:27.453Z,1520518647.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:27.850Z,1520518647.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:28.251Z,1520518648.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:28.659Z,1520518648.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:29.049Z,1520518649.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:29.451Z,1520518649.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:29.864Z,1520518649.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:30.255Z,1520518650.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:30.656Z,1520518650.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:31.062Z,1520518651.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:31.451Z,1520518651.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:31.849Z,1520518651.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:32.259Z,1520518652.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:32.655Z,1520518652.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:33.084Z,1520518653.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:33.467Z,1520518653.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:33.855Z,1520518653.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:34.255Z,1520518654.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:34.645Z,1520518654.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:35.039Z,1520518655.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:35.444Z,1520518655.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:35.844Z,1520518655.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:36.248Z,1520518656.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:36.649Z,1520518656.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:37.049Z,1520518657.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:37.457Z,1520518657.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:37.844Z,1520518657.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:38.277Z,1520518658.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:38.702Z,1520518658.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:39.230Z,1520518659.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:39.478Z,1520518659.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:39.849Z,1520518659.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:39.853Z,1520518659.853 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T14:12:39.6Z
2018-03-08T14:17:39.853Z,1520518659.853 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T14:17:39.853Z,1520518659.853 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T14:17:40.247Z,1520518660.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:40.739Z,1520518660.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:44.501Z,1520518664.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:44.628Z,1520518664.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:44.965Z,1520518664.965 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0152.lzma
2018-03-08T14:17:45.055Z,1520518665.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:45.417Z,1520518665.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:45.763Z,1520518665.763 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0152.lzma.bak
2018-03-08T14:17:45.764Z,1520518665.764 [DataOverHttps](INFO): SBD MOMSN=7986379
2018-03-08T14:17:45.831Z,1520518665.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:46.378Z,1520518666.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:46.611Z,1520518666.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:49.715Z,1520518669.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:49.830Z,1520518669.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:50.210Z,1520518670.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:50.614Z,1520518670.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:51.011Z,1520518671.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:51.410Z,1520518671.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:51.810Z,1520518671.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:54.879Z,1520518674.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:54.989Z,1520518674.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:55.329Z,1520518675.329 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0153.lzma
2018-03-08T14:17:55.394Z,1520518675.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:55.795Z,1520518675.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:56.127Z,1520518676.127 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0153.lzma.bak
2018-03-08T14:17:56.127Z,1520518676.127 [DataOverHttps](INFO): SBD MOMSN=7986381
2018-03-08T14:17:56.199Z,1520518676.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:56.931Z,1520518676.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:17:56.943Z,1520518676.943 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T14:17:56.943Z,1520518676.943 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T14:17:56.943Z,1520518676.943 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T14:17:57.093Z,1520518677.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:02.658Z,1520518682.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:02.794Z,1520518682.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:03.189Z,1520518683.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:03.568Z,1520518683.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:03.964Z,1520518683.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:04.353Z,1520518684.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:04.755Z,1520518684.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:05.155Z,1520518685.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:05.551Z,1520518685.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:05.962Z,1520518685.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:06.363Z,1520518686.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:06.770Z,1520518686.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:07.152Z,1520518687.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:07.547Z,1520518687.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:07.951Z,1520518687.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:08.351Z,1520518688.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:08.748Z,1520518688.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:09.175Z,1520518689.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:09.572Z,1520518689.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:09.973Z,1520518689.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:10.349Z,1520518690.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:10.751Z,1520518690.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:11.158Z,1520518691.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:11.551Z,1520518691.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:11.958Z,1520518691.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:12.365Z,1520518692.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:12.763Z,1520518692.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:13.162Z,1520518693.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:13.553Z,1520518693.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:13.957Z,1520518693.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:14.363Z,1520518694.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:14.757Z,1520518694.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:15.174Z,1520518695.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:15.594Z,1520518695.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:15.992Z,1520518695.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:16.358Z,1520518696.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:16.754Z,1520518696.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:17.165Z,1520518697.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:17.559Z,1520518697.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:17.970Z,1520518697.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:18.362Z,1520518698.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:18.761Z,1520518698.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:19.160Z,1520518699.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:19.559Z,1520518699.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:19.962Z,1520518699.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:20.370Z,1520518700.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:20.766Z,1520518700.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:21.167Z,1520518701.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:21.574Z,1520518701.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:21.969Z,1520518701.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:22.383Z,1520518702.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:22.747Z,1520518702.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:23.151Z,1520518703.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:23.551Z,1520518703.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:23.985Z,1520518703.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:24.386Z,1520518704.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:24.772Z,1520518704.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:25.148Z,1520518705.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:25.547Z,1520518705.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:25.979Z,1520518705.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:26.350Z,1520518706.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:26.754Z,1520518706.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:27.181Z,1520518707.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:27.588Z,1520518707.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:27.956Z,1520518707.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:28.347Z,1520518708.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:28.750Z,1520518708.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:29.186Z,1520518709.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:29.559Z,1520518709.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:29.960Z,1520518709.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:30.360Z,1520518710.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:30.759Z,1520518710.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:31.150Z,1520518711.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:31.548Z,1520518711.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:31.951Z,1520518711.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:32.439Z,1520518712.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:32.763Z,1520518712.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:33.110Z,1520518713.110 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T14:18:33.110Z,1520518713.110 [NAL9602] Data Fault, FailCount= 2
2018-03-08T14:18:33.110Z,1520518713.110 [NAL9602](ERROR): Data Fault
2018-03-08T14:18:33.188Z,1520518713.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:33.209Z,1520518713.209 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T14:18:33.510Z,1520518713.510 [NAL9602](INFO): Powering down
2018-03-08T14:18:33.569Z,1520518713.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:33.953Z,1520518713.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:34.370Z,1520518714.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:34.408Z,1520518714.408 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T14:18:34.408Z,1520518714.408 [NAL9602] No Fault, FailCount= 2
2018-03-08T14:18:34.799Z,1520518714.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:35.203Z,1520518715.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:35.561Z,1520518715.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:35.966Z,1520518715.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:36.361Z,1520518716.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:36.779Z,1520518716.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:37.171Z,1520518717.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:37.540Z,1520518717.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:37.959Z,1520518717.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:38.354Z,1520518718.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:38.750Z,1520518718.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:39.159Z,1520518719.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:39.591Z,1520518719.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:39.964Z,1520518719.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:40.358Z,1520518720.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:40.754Z,1520518720.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:41.151Z,1520518721.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:41.566Z,1520518721.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:41.941Z,1520518721.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:42.339Z,1520518722.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:42.754Z,1520518722.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:43.191Z,1520518723.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:43.550Z,1520518723.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:43.955Z,1520518723.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:44.353Z,1520518724.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:44.753Z,1520518724.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:45.151Z,1520518725.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:45.550Z,1520518725.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:45.947Z,1520518725.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:46.354Z,1520518726.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:46.756Z,1520518726.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:47.162Z,1520518727.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:47.562Z,1520518727.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:47.961Z,1520518727.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:48.340Z,1520518728.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:48.765Z,1520518728.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:49.169Z,1520518729.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:49.539Z,1520518729.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:49.969Z,1520518729.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:50.377Z,1520518730.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:50.749Z,1520518730.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:51.154Z,1520518731.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:51.592Z,1520518731.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:51.943Z,1520518731.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:52.361Z,1520518732.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:52.766Z,1520518732.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:53.135Z,1520518733.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:53.559Z,1520518733.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:53.964Z,1520518733.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:54.350Z,1520518734.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:54.767Z,1520518734.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:55.142Z,1520518735.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:55.543Z,1520518735.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:55.973Z,1520518735.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:56.342Z,1520518736.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:56.744Z,1520518736.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:57.147Z,1520518737.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:18:57.582Z,1520518737.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:00.774Z,1520518740.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:00.893Z,1520518740.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:01.251Z,1520518741.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:01.643Z,1520518741.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:02.044Z,1520518742.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:02.450Z,1520518742.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:02.848Z,1520518742.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:03.249Z,1520518743.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:03.610Z,1520518743.610 [NAL9602](INFO): Powering up NAL9602
2018-03-08T14:19:03.656Z,1520518743.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:04.086Z,1520518744.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:04.442Z,1520518744.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:04.847Z,1520518744.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:05.288Z,1520518745.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:05.646Z,1520518745.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:06.051Z,1520518746.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:06.449Z,1520518746.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:06.855Z,1520518746.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:07.254Z,1520518747.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:07.659Z,1520518747.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:08.027Z,1520518748.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:08.454Z,1520518748.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:08.865Z,1520518748.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:09.230Z,1520518749.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:09.667Z,1520518749.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:10.070Z,1520518750.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:10.438Z,1520518750.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:10.845Z,1520518750.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:11.272Z,1520518751.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:11.643Z,1520518751.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:12.047Z,1520518752.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:12.445Z,1520518752.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:12.838Z,1520518752.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:13.280Z,1520518753.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:13.646Z,1520518753.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:14.035Z,1520518754.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:14.452Z,1520518754.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:14.823Z,1520518754.823 [NAL9602](INFO): NAL9602 initialized
2018-03-08T14:19:14.862Z,1520518754.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:15.261Z,1520518755.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:15.659Z,1520518755.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:16.053Z,1520518756.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:16.458Z,1520518756.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:16.844Z,1520518756.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:17.246Z,1520518757.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:17.643Z,1520518757.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:18.044Z,1520518758.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:18.465Z,1520518758.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:18.860Z,1520518758.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:19.257Z,1520518759.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:19.650Z,1520518759.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:20.041Z,1520518760.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:20.459Z,1520518760.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:20.861Z,1520518760.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:21.257Z,1520518761.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:21.650Z,1520518761.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:22.054Z,1520518762.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:22.458Z,1520518762.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:22.861Z,1520518762.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:23.257Z,1520518763.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:23.642Z,1520518763.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:24.053Z,1520518764.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:24.451Z,1520518764.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:24.856Z,1520518764.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:25.263Z,1520518765.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:25.647Z,1520518765.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:26.033Z,1520518766.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:26.467Z,1520518766.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:26.860Z,1520518766.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:27.257Z,1520518767.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:27.659Z,1520518767.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:28.061Z,1520518768.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:28.458Z,1520518768.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:28.874Z,1520518768.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:29.263Z,1520518769.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:29.639Z,1520518769.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:30.040Z,1520518770.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:30.462Z,1520518770.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:30.867Z,1520518770.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:31.262Z,1520518771.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:31.639Z,1520518771.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:32.042Z,1520518772.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:32.471Z,1520518772.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:32.868Z,1520518772.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:33.254Z,1520518773.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:33.647Z,1520518773.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:34.045Z,1520518774.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:34.447Z,1520518774.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:34.853Z,1520518774.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:35.249Z,1520518775.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:35.646Z,1520518775.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:36.046Z,1520518776.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:36.448Z,1520518776.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:36.848Z,1520518776.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:37.254Z,1520518777.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:37.647Z,1520518777.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:38.042Z,1520518778.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:38.452Z,1520518778.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:38.852Z,1520518778.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:39.248Z,1520518779.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:39.647Z,1520518779.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:40.046Z,1520518780.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:40.449Z,1520518780.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:40.849Z,1520518780.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:41.254Z,1520518781.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:41.648Z,1520518781.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:42.046Z,1520518782.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:42.449Z,1520518782.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:42.848Z,1520518782.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:43.252Z,1520518783.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:43.650Z,1520518783.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:44.045Z,1520518784.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:44.449Z,1520518784.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:44.853Z,1520518784.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:45.252Z,1520518785.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:45.644Z,1520518785.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:46.050Z,1520518786.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:46.490Z,1520518786.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:46.861Z,1520518786.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:47.263Z,1520518787.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:47.653Z,1520518787.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:48.090Z,1520518788.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:48.465Z,1520518788.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:48.856Z,1520518788.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:49.265Z,1520518789.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:49.650Z,1520518789.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:50.041Z,1520518790.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:50.457Z,1520518790.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:50.860Z,1520518790.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:51.261Z,1520518791.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:51.658Z,1520518791.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:52.059Z,1520518792.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:52.455Z,1520518792.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:52.862Z,1520518792.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:53.263Z,1520518793.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:53.634Z,1520518793.634 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:53.634Z,1520518793.634 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 132
2018-03-08T14:19:53.634Z,1520518793.634 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T14:19:53.636Z,1520518793.636 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:53.636Z,1520518793.636 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 132
2018-03-08T14:19:53.636Z,1520518793.636 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T14:19:53.654Z,1520518793.654 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:53.654Z,1520518793.654 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 132
2018-03-08T14:19:53.654Z,1520518793.654 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T14:19:53.678Z,1520518793.678 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T14:19:53.678Z,1520518793.678 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T14:19:53.678Z,1520518793.678 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T14:19:54.060Z,1520518794.060 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T14:19:54.060Z,1520518794.060 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 132
2018-03-08T14:19:54.073Z,1520518794.073 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T14:19:54.073Z,1520518794.073 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 132
2018-03-08T14:19:54.073Z,1520518794.073 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T14:19:54.073Z,1520518794.073 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 132
2018-03-08T14:19:54.451Z,1520518794.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T14:19:54.451Z,1520518794.451 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:19:54.452Z,1520518794.452 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:19:54.452Z,1520518794.452 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T14:19:54.453Z,1520518794.453 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:19:54.453Z,1520518794.453 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:19:54.453Z,1520518794.453 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T14:19:54.454Z,1520518794.454 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:19:54.454Z,1520518794.454 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:19:54.854Z,1520518794.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T14:19:54.855Z,1520518794.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:55.255Z,1520518795.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T14:19:55.256Z,1520518795.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:55.646Z,1520518795.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T14:19:55.647Z,1520518795.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:56.052Z,1520518796.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T14:19:56.062Z,1520518796.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:56.480Z,1520518796.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T14:19:56.481Z,1520518796.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:56.850Z,1520518796.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T14:19:56.851Z,1520518796.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:57.252Z,1520518797.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T14:19:57.253Z,1520518797.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:19:57.666Z,1520518797.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T14:19:57.667Z,1520518797.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:01.571Z,1520518801.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2018-03-08T14:20:01.571Z,1520518801.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:01.699Z,1520518801.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-08T14:20:01.700Z,1520518801.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:02.098Z,1520518802.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-08T14:20:02.099Z,1520518802.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:02.478Z,1520518802.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T14:20:02.479Z,1520518802.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:02.871Z,1520518802.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T14:20:02.872Z,1520518802.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:03.268Z,1520518803.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T14:20:03.269Z,1520518803.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:03.663Z,1520518803.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T14:20:03.664Z,1520518803.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:04.080Z,1520518804.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T14:20:04.108Z,1520518804.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:04.472Z,1520518804.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T14:20:04.473Z,1520518804.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:04.913Z,1520518804.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T14:20:04.914Z,1520518804.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:05.302Z,1520518805.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T14:20:05.303Z,1520518805.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:05.678Z,1520518805.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T14:20:05.679Z,1520518805.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:06.070Z,1520518806.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T14:20:06.071Z,1520518806.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:06.479Z,1520518806.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T14:20:06.480Z,1520518806.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:06.879Z,1520518806.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T14:20:06.880Z,1520518806.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:07.292Z,1520518807.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-08T14:20:07.293Z,1520518807.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:07.667Z,1520518807.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T14:20:07.668Z,1520518807.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:08.068Z,1520518808.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T14:20:08.069Z,1520518808.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:08.469Z,1520518808.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T14:20:08.470Z,1520518808.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:08.914Z,1520518808.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-08T14:20:08.915Z,1520518808.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:09.278Z,1520518809.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T14:20:09.279Z,1520518809.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:09.676Z,1520518809.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T14:20:09.677Z,1520518809.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:10.076Z,1520518810.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T14:20:10.077Z,1520518810.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:10.475Z,1520518810.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T14:20:10.476Z,1520518810.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:10.862Z,1520518810.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T14:20:10.863Z,1520518810.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:11.277Z,1520518811.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T14:20:11.278Z,1520518811.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:11.672Z,1520518811.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T14:20:11.673Z,1520518811.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:12.074Z,1520518812.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T14:20:12.075Z,1520518812.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:12.484Z,1520518812.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T14:20:12.486Z,1520518812.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:12.887Z,1520518812.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T14:20:12.889Z,1520518812.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:13.277Z,1520518813.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T14:20:13.278Z,1520518813.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:13.673Z,1520518813.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:14.073Z,1520518814.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:14.491Z,1520518814.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:14.912Z,1520518814.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:15.282Z,1520518815.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:15.674Z,1520518815.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:16.074Z,1520518816.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:16.483Z,1520518816.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:16.880Z,1520518816.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:17.280Z,1520518817.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:17.670Z,1520518817.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:18.067Z,1520518818.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:18.471Z,1520518818.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:18.871Z,1520518818.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:19.272Z,1520518819.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:19.687Z,1520518819.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:20.080Z,1520518820.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:20.486Z,1520518820.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:20.878Z,1520518820.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:21.274Z,1520518821.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:21.668Z,1520518821.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:22.079Z,1520518822.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:22.482Z,1520518822.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:22.986Z,1520518822.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:23.274Z,1520518823.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:23.672Z,1520518823.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:24.073Z,1520518824.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:24.486Z,1520518824.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:24.891Z,1520518824.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:25.282Z,1520518825.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:25.678Z,1520518825.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:26.069Z,1520518826.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:26.470Z,1520518826.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:26.868Z,1520518826.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:27.278Z,1520518827.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:27.682Z,1520518827.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:28.076Z,1520518828.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:28.476Z,1520518828.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:28.870Z,1520518828.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:29.277Z,1520518829.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:29.667Z,1520518829.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:30.077Z,1520518830.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:30.482Z,1520518830.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:30.883Z,1520518830.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:31.289Z,1520518831.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:31.669Z,1520518831.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:32.074Z,1520518832.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:32.484Z,1520518832.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:32.877Z,1520518832.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:33.278Z,1520518833.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:33.674Z,1520518833.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:34.075Z,1520518834.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:34.480Z,1520518834.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:34.880Z,1520518834.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:35.284Z,1520518835.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:35.677Z,1520518835.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:36.081Z,1520518836.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:36.517Z,1520518836.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:36.903Z,1520518836.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:37.282Z,1520518837.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:37.670Z,1520518837.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:38.071Z,1520518838.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:38.524Z,1520518838.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:38.876Z,1520518838.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:39.272Z,1520518839.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:39.675Z,1520518839.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:40.061Z,1520518840.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:40.472Z,1520518840.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:40.871Z,1520518840.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:41.301Z,1520518841.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:41.675Z,1520518841.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:42.090Z,1520518842.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:42.478Z,1520518842.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:42.880Z,1520518842.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:43.280Z,1520518843.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:43.678Z,1520518843.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:44.083Z,1520518844.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:44.474Z,1520518844.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:44.899Z,1520518844.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:45.274Z,1520518845.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:45.685Z,1520518845.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:46.086Z,1520518846.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:46.499Z,1520518846.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:46.898Z,1520518846.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:47.269Z,1520518847.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:47.668Z,1520518847.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:48.069Z,1520518848.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:48.481Z,1520518848.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:48.880Z,1520518848.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:49.277Z,1520518849.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:49.668Z,1520518849.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:50.067Z,1520518850.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:50.481Z,1520518850.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:50.875Z,1520518850.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:51.277Z,1520518851.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:51.670Z,1520518851.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:52.073Z,1520518852.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:52.476Z,1520518852.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:52.880Z,1520518852.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:53.277Z,1520518853.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:53.678Z,1520518853.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:54.075Z,1520518854.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:54.480Z,1520518854.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:54.882Z,1520518854.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:55.326Z,1520518855.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:55.671Z,1520518855.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:56.076Z,1520518856.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:56.475Z,1520518856.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:56.874Z,1520518856.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:57.273Z,1520518857.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:20:57.694Z,1520518857.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:01.191Z,1520518861.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:01.359Z,1520518861.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:01.790Z,1520518861.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:02.118Z,1520518862.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:02.526Z,1520518862.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:02.927Z,1520518862.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:03.326Z,1520518863.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:03.728Z,1520518863.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:04.140Z,1520518864.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:04.526Z,1520518864.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:04.923Z,1520518864.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:05.329Z,1520518865.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:05.727Z,1520518865.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:06.130Z,1520518866.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:06.546Z,1520518866.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:06.916Z,1520518866.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:07.340Z,1520518867.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:07.733Z,1520518867.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:08.114Z,1520518868.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:08.513Z,1520518868.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:08.914Z,1520518868.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:09.337Z,1520518869.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:09.746Z,1520518869.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:10.118Z,1520518870.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:10.524Z,1520518870.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:10.942Z,1520518870.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:11.318Z,1520518871.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:11.723Z,1520518871.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:12.117Z,1520518872.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:12.547Z,1520518872.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:12.938Z,1520518872.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:13.323Z,1520518873.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:13.718Z,1520518873.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:14.142Z,1520518874.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:14.518Z,1520518874.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:14.917Z,1520518874.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:15.317Z,1520518875.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:15.807Z,1520518875.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:16.146Z,1520518876.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:16.539Z,1520518876.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:16.936Z,1520518876.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:17.339Z,1520518877.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:17.718Z,1520518877.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:18.114Z,1520518878.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:18.520Z,1520518878.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:18.938Z,1520518878.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:19.321Z,1520518879.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:19.716Z,1520518879.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:20.110Z,1520518880.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:20.532Z,1520518880.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:20.919Z,1520518880.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:21.317Z,1520518881.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:21.726Z,1520518881.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:22.135Z,1520518882.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:22.521Z,1520518882.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:22.922Z,1520518882.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:23.320Z,1520518883.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:23.735Z,1520518883.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:24.121Z,1520518884.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:24.530Z,1520518884.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:24.925Z,1520518884.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:25.340Z,1520518885.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:25.726Z,1520518885.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:26.127Z,1520518886.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:26.527Z,1520518886.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:26.930Z,1520518886.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:27.305Z,1520518887.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:27.730Z,1520518887.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:28.134Z,1520518888.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:28.538Z,1520518888.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:28.931Z,1520518888.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:29.311Z,1520518889.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:29.713Z,1520518889.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:30.135Z,1520518890.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:30.537Z,1520518890.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:30.916Z,1520518890.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:31.339Z,1520518891.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:31.731Z,1520518891.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:32.120Z,1520518892.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:32.514Z,1520518892.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:32.914Z,1520518892.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:33.338Z,1520518893.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:33.721Z,1520518893.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:34.147Z,1520518894.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:34.513Z,1520518894.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:34.939Z,1520518894.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:35.315Z,1520518895.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:35.722Z,1520518895.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:36.117Z,1520518896.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:36.541Z,1520518896.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:36.920Z,1520518896.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:37.318Z,1520518897.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:37.719Z,1520518897.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:38.127Z,1520518898.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:38.519Z,1520518898.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:38.918Z,1520518898.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:39.314Z,1520518899.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:39.751Z,1520518899.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:40.140Z,1520518900.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:40.537Z,1520518900.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:40.920Z,1520518900.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:41.335Z,1520518901.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:41.722Z,1520518901.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:42.119Z,1520518902.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:42.526Z,1520518902.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:42.931Z,1520518902.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:43.352Z,1520518903.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:43.721Z,1520518903.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:44.121Z,1520518904.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:44.539Z,1520518904.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:44.921Z,1520518904.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:45.326Z,1520518905.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:45.727Z,1520518905.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:46.134Z,1520518906.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:46.539Z,1520518906.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:46.936Z,1520518906.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:47.319Z,1520518907.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:47.726Z,1520518907.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:48.127Z,1520518908.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:48.545Z,1520518908.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:48.947Z,1520518908.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:49.399Z,1520518909.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:49.424Z,1520518909.424 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T14:21:49.820Z,1520518909.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:50.142Z,1520518910.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:50.520Z,1520518910.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:50.954Z,1520518910.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:51.321Z,1520518911.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:51.754Z,1520518911.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:52.162Z,1520518912.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:52.550Z,1520518912.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:52.959Z,1520518912.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:53.320Z,1520518913.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:53.735Z,1520518913.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:54.127Z,1520518914.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:54.525Z,1520518914.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:54.940Z,1520518914.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:55.336Z,1520518915.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:55.763Z,1520518915.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:56.138Z,1520518916.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:56.514Z,1520518916.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.376517 seconds old.
2018-03-08T14:21:56.515Z,1520518916.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:56.516Z,1520518916.516 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.376869 seconds old.
2018-03-08T14:21:56.517Z,1520518916.517 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.377448 seconds old.
2018-03-08T14:21:56.921Z,1520518916.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.783469 seconds old.
2018-03-08T14:21:56.922Z,1520518916.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:56.923Z,1520518916.923 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.783802 seconds old.
2018-03-08T14:21:56.924Z,1520518916.924 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.784149 seconds old.
2018-03-08T14:21:57.326Z,1520518917.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.187859 seconds old.
2018-03-08T14:21:57.327Z,1520518917.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:21:57.327Z,1520518917.327 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.188201 seconds old.
2018-03-08T14:21:57.345Z,1520518917.345 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.188542 seconds old.
2018-03-08T14:21:57.722Z,1520518917.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:01.107Z,1520518921.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:01.279Z,1520518921.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:01.637Z,1520518921.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:02.043Z,1520518922.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:02.437Z,1520518922.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:02.840Z,1520518922.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:03.252Z,1520518923.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:03.636Z,1520518923.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:04.034Z,1520518924.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:04.444Z,1520518924.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:04.846Z,1520518924.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:05.239Z,1520518925.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:05.618Z,1520518925.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:06.019Z,1520518926.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:06.442Z,1520518926.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:06.851Z,1520518926.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:07.264Z,1520518927.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:07.642Z,1520518927.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:08.051Z,1520518928.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:08.448Z,1520518928.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:08.850Z,1520518928.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:09.250Z,1520518929.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:09.623Z,1520518929.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:10.023Z,1520518930.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:10.455Z,1520518930.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:10.855Z,1520518930.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:11.255Z,1520518931.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:11.628Z,1520518931.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:12.031Z,1520518932.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:12.429Z,1520518932.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:12.856Z,1520518932.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:13.254Z,1520518933.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:13.627Z,1520518933.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:14.065Z,1520518934.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:14.428Z,1520518934.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:14.858Z,1520518934.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:15.283Z,1520518935.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:15.628Z,1520518935.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:16.032Z,1520518936.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:16.469Z,1520518936.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:16.839Z,1520518936.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:17.235Z,1520518937.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:17.628Z,1520518937.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:18.029Z,1520518938.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:18.439Z,1520518938.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:18.839Z,1520518938.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:19.236Z,1520518939.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:19.635Z,1520518939.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:20.030Z,1520518940.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:20.446Z,1520518940.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:20.844Z,1520518940.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:21.239Z,1520518941.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:21.631Z,1520518941.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:22.034Z,1520518942.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:22.446Z,1520518942.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:22.835Z,1520518942.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:23.239Z,1520518943.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:23.631Z,1520518943.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:24.031Z,1520518944.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:24.447Z,1520518944.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:24.839Z,1520518944.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:25.244Z,1520518945.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:25.630Z,1520518945.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:26.037Z,1520518946.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:26.440Z,1520518946.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:26.832Z,1520518946.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:27.231Z,1520518947.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:27.658Z,1520518947.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:28.019Z,1520518948.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:28.432Z,1520518948.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:28.832Z,1520518948.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:29.232Z,1520518949.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:29.620Z,1520518949.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:30.012Z,1520518950.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:30.446Z,1520518950.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:30.834Z,1520518950.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:31.224Z,1520518951.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:31.631Z,1520518951.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:32.031Z,1520518952.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:32.439Z,1520518952.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:32.836Z,1520518952.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:33.242Z,1520518953.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:33.623Z,1520518953.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:34.031Z,1520518954.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:34.433Z,1520518954.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:34.836Z,1520518954.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:35.231Z,1520518955.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:35.628Z,1520518955.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:36.022Z,1520518956.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:36.438Z,1520518956.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:36.835Z,1520518956.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:37.246Z,1520518957.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:37.642Z,1520518957.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:38.034Z,1520518958.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:38.432Z,1520518958.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:38.841Z,1520518958.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:39.255Z,1520518959.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:39.632Z,1520518959.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:40.029Z,1520518960.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:40.455Z,1520518960.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:40.881Z,1520518960.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:41.247Z,1520518961.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:41.636Z,1520518961.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:42.043Z,1520518962.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:42.447Z,1520518962.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:42.851Z,1520518962.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:43.240Z,1520518963.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:43.627Z,1520518963.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:44.030Z,1520518964.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:44.449Z,1520518964.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:44.847Z,1520518964.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:45.251Z,1520518965.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:45.624Z,1520518965.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:46.024Z,1520518966.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:46.459Z,1520518966.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:46.851Z,1520518966.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:47.270Z,1520518967.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:47.624Z,1520518967.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:48.024Z,1520518968.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:48.460Z,1520518968.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:48.867Z,1520518968.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:49.267Z,1520518969.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:49.628Z,1520518969.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:50.028Z,1520518970.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:50.435Z,1520518970.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:50.835Z,1520518970.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:51.238Z,1520518971.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:51.663Z,1520518971.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:52.032Z,1520518972.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:52.467Z,1520518972.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:52.839Z,1520518972.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:53.243Z,1520518973.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:53.639Z,1520518973.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:54.037Z,1520518974.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:54.443Z,1520518974.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:54.839Z,1520518974.839 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:54.840Z,1520518974.840 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 133
2018-03-08T14:22:54.840Z,1520518974.840 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T14:22:54.841Z,1520518974.841 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:54.842Z,1520518974.842 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 133
2018-03-08T14:22:54.842Z,1520518974.842 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T14:22:54.843Z,1520518974.843 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:54.843Z,1520518974.843 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 133
2018-03-08T14:22:54.843Z,1520518974.843 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T14:22:54.856Z,1520518974.856 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T14:22:54.856Z,1520518974.856 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T14:22:54.857Z,1520518974.857 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T14:22:55.256Z,1520518975.256 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T14:22:55.256Z,1520518975.256 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 133
2018-03-08T14:22:55.257Z,1520518975.257 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T14:22:55.257Z,1520518975.257 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 133
2018-03-08T14:22:55.258Z,1520518975.258 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T14:22:55.258Z,1520518975.258 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 133
2018-03-08T14:22:55.636Z,1520518975.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T14:22:55.637Z,1520518975.637 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:22:55.637Z,1520518975.637 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:22:55.637Z,1520518975.637 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T14:22:55.638Z,1520518975.638 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:22:55.638Z,1520518975.638 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:22:55.638Z,1520518975.638 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T14:22:55.639Z,1520518975.639 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:22:55.639Z,1520518975.639 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:22:56.046Z,1520518976.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T14:22:56.047Z,1520518976.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:56.440Z,1520518976.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T14:22:56.441Z,1520518976.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:56.846Z,1520518976.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T14:22:56.847Z,1520518976.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:57.244Z,1520518977.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T14:22:57.245Z,1520518977.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:57.248Z,1520518977.248 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T14:22:57.249Z,1520518977.249 [Default:CheckIn:C.Wait] Stopped
2018-03-08T14:22:57.249Z,1520518977.249 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T14:22:57.249Z,1520518977.249 [Default:CheckIn:D] Running Loop=1
2018-03-08T14:22:57.651Z,1520518977.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T14:22:57.651Z,1520518977.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:57.663Z,1520518977.663 [Default:CheckIn:D] Stopped
2018-03-08T14:22:57.663Z,1520518977.663 [Default:CheckIn:E] Running Loop=1
2018-03-08T14:22:58.024Z,1520518978.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T14:22:58.025Z,1520518978.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:22:58.085Z,1520518978.085 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 397.214290 min 
2018-03-08T14:22:58.085Z,1520518978.085 [Default:CheckIn:E] Stopped
2018-03-08T14:22:58.085Z,1520518978.085 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T14:22:58.085Z,1520518978.085 [Default:CheckIn] Stopped
2018-03-08T14:22:58.085Z,1520518978.085 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T14:22:58.086Z,1520518978.086 [Default:CheckIn](INFO): Running loop #39
2018-03-08T14:22:58.086Z,1520518978.086 [Default:CheckIn] Running Loop=39
2018-03-08T14:22:58.086Z,1520518978.086 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T14:22:58.086Z,1520518978.086 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T14:23:01.392Z,1520518981.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2018-03-08T14:23:01.393Z,1520518981.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:01.542Z,1520518981.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-03-08T14:23:01.543Z,1520518981.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:01.902Z,1520518981.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2018-03-08T14:23:01.903Z,1520518981.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:02.299Z,1520518982.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-03-08T14:23:02.300Z,1520518982.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:02.694Z,1520518982.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2018-03-08T14:23:02.695Z,1520518982.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:03.104Z,1520518983.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-03-08T14:23:03.105Z,1520518983.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:03.535Z,1520518983.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-03-08T14:23:03.536Z,1520518983.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:03.933Z,1520518983.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-03-08T14:23:03.934Z,1520518983.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:04.306Z,1520518984.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-03-08T14:23:04.307Z,1520518984.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:04.699Z,1520518984.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-03-08T14:23:04.700Z,1520518984.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:05.091Z,1520518985.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-03-08T14:23:05.092Z,1520518985.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:05.495Z,1520518985.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-03-08T14:23:05.496Z,1520518985.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:05.908Z,1520518985.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2018-03-08T14:23:05.909Z,1520518985.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:06.290Z,1520518986.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2018-03-08T14:23:06.291Z,1520518986.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:06.752Z,1520518986.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2018-03-08T14:23:06.753Z,1520518986.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:07.096Z,1520518987.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2018-03-08T14:23:07.097Z,1520518987.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:07.492Z,1520518987.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2018-03-08T14:23:07.493Z,1520518987.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:07.882Z,1520518987.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2018-03-08T14:23:07.883Z,1520518987.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:08.288Z,1520518988.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2018-03-08T14:23:08.289Z,1520518988.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:08.683Z,1520518988.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2018-03-08T14:23:08.684Z,1520518988.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:09.090Z,1520518989.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2018-03-08T14:23:09.091Z,1520518989.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:09.496Z,1520518989.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-03-08T14:23:09.497Z,1520518989.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:09.906Z,1520518989.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2018-03-08T14:23:09.907Z,1520518989.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:10.361Z,1520518990.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-03-08T14:23:10.362Z,1520518990.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:10.680Z,1520518990.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-03-08T14:23:10.681Z,1520518990.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:11.080Z,1520518991.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-03-08T14:23:11.081Z,1520518991.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:11.491Z,1520518991.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2018-03-08T14:23:11.492Z,1520518991.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:11.897Z,1520518991.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2018-03-08T14:23:11.898Z,1520518991.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:12.320Z,1520518992.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2018-03-08T14:23:12.329Z,1520518992.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:12.708Z,1520518992.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2018-03-08T14:23:12.709Z,1520518992.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:13.102Z,1520518993.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-03-08T14:23:13.103Z,1520518993.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:13.516Z,1520518993.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-03-08T14:23:13.537Z,1520518993.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:13.891Z,1520518993.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-03-08T14:23:13.892Z,1520518993.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:14.311Z,1520518994.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-03-08T14:23:14.311Z,1520518994.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:14.701Z,1520518994.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-03-08T14:23:14.702Z,1520518994.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:15.104Z,1520518995.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:15.505Z,1520518995.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:15.910Z,1520518995.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:16.314Z,1520518996.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:16.681Z,1520518996.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:17.106Z,1520518997.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:17.487Z,1520518997.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:17.890Z,1520518997.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:18.290Z,1520518998.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:18.710Z,1520518998.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:19.120Z,1520518999.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:19.521Z,1520518999.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:19.919Z,1520518999.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:20.291Z,1520519000.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:20.687Z,1520519000.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:21.095Z,1520519001.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:21.516Z,1520519001.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:21.915Z,1520519001.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:22.313Z,1520519002.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:22.689Z,1520519002.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:23.090Z,1520519003.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:23.488Z,1520519003.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:23.930Z,1520519003.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:24.311Z,1520519004.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:24.711Z,1520519004.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:25.132Z,1520519005.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:25.492Z,1520519005.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:25.926Z,1520519005.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:26.331Z,1520519006.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:26.694Z,1520519006.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:27.091Z,1520519007.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:27.520Z,1520519007.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:27.919Z,1520519007.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:28.297Z,1520519008.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:28.690Z,1520519008.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:29.098Z,1520519009.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:29.491Z,1520519009.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:29.891Z,1520519009.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:30.291Z,1520519010.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:30.718Z,1520519010.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:31.121Z,1520519011.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:31.519Z,1520519011.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:31.891Z,1520519011.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:32.290Z,1520519012.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:32.691Z,1520519012.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:33.091Z,1520519013.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:33.520Z,1520519013.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:33.919Z,1520519013.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:34.318Z,1520519014.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:34.690Z,1520519014.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:35.089Z,1520519015.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:35.489Z,1520519015.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:35.892Z,1520519015.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:36.294Z,1520519016.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:36.703Z,1520519016.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:37.103Z,1520519017.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:37.507Z,1520519017.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:37.898Z,1520519017.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:38.291Z,1520519018.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:38.739Z,1520519018.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:39.106Z,1520519019.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:39.505Z,1520519019.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:39.907Z,1520519019.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:40.300Z,1520519020.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:40.694Z,1520519020.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:41.093Z,1520519021.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:41.497Z,1520519021.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:41.898Z,1520519021.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:42.306Z,1520519022.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:42.720Z,1520519022.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:43.155Z,1520519023.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:43.523Z,1520519023.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:43.897Z,1520519023.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:44.310Z,1520519024.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:44.704Z,1520519024.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:45.104Z,1520519025.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:45.566Z,1520519025.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:45.915Z,1520519025.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:46.306Z,1520519026.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:46.700Z,1520519026.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:47.095Z,1520519027.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:47.498Z,1520519027.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:47.906Z,1520519027.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:48.314Z,1520519028.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:48.703Z,1520519028.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:49.111Z,1520519029.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:49.511Z,1520519029.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:49.903Z,1520519029.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:50.287Z,1520519030.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:50.684Z,1520519030.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:51.091Z,1520519031.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:51.519Z,1520519031.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:51.915Z,1520519031.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:52.316Z,1520519032.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:52.686Z,1520519032.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:53.083Z,1520519033.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:53.494Z,1520519033.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:53.887Z,1520519033.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:54.290Z,1520519034.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:54.718Z,1520519034.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:55.135Z,1520519035.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:55.490Z,1520519035.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:55.903Z,1520519035.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:56.294Z,1520519036.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:56.698Z,1520519036.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:57.094Z,1520519037.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:57.510Z,1520519037.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:57.931Z,1520519037.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:23:58.303Z,1520519038.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:02.435Z,1520519042.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:02.549Z,1520519042.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:02.928Z,1520519042.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:03.330Z,1520519043.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:03.733Z,1520519043.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:04.111Z,1520519044.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:04.509Z,1520519044.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:04.908Z,1520519044.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:05.339Z,1520519045.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:05.734Z,1520519045.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:06.121Z,1520519046.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:06.547Z,1520519046.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:06.976Z,1520519046.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:07.338Z,1520519047.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:07.735Z,1520519047.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:08.109Z,1520519048.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:08.534Z,1520519048.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:08.918Z,1520519048.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:09.317Z,1520519049.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:09.707Z,1520519049.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:10.139Z,1520519050.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:10.517Z,1520519050.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:10.909Z,1520519050.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:11.313Z,1520519051.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:11.747Z,1520519051.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:12.146Z,1520519052.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:12.551Z,1520519052.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:12.918Z,1520519052.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:13.323Z,1520519053.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:13.716Z,1520519053.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:14.114Z,1520519054.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:14.528Z,1520519054.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:14.943Z,1520519054.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:15.323Z,1520519055.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:15.715Z,1520519055.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:16.124Z,1520519056.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:16.526Z,1520519056.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:16.913Z,1520519056.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:17.322Z,1520519057.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:17.727Z,1520519057.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:18.138Z,1520519058.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:18.555Z,1520519058.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:18.936Z,1520519058.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:19.307Z,1520519059.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:19.734Z,1520519059.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:20.113Z,1520519060.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:20.513Z,1520519060.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:20.936Z,1520519060.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:21.338Z,1520519061.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:21.724Z,1520519061.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:22.122Z,1520519062.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:22.514Z,1520519062.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:22.952Z,1520519062.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:23.327Z,1520519063.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:23.732Z,1520519063.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:24.142Z,1520519064.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:24.591Z,1520519064.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:24.937Z,1520519064.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:25.307Z,1520519065.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:25.711Z,1520519065.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:26.137Z,1520519066.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:26.527Z,1520519066.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:26.929Z,1520519066.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:27.333Z,1520519067.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:27.731Z,1520519067.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:28.135Z,1520519068.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:28.508Z,1520519068.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:28.905Z,1520519068.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:29.344Z,1520519069.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:29.733Z,1520519069.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:30.131Z,1520519070.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:30.546Z,1520519070.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:30.962Z,1520519070.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:31.337Z,1520519071.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:31.714Z,1520519071.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:32.113Z,1520519072.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:32.539Z,1520519072.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:32.917Z,1520519072.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:33.319Z,1520519073.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:33.713Z,1520519073.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:34.138Z,1520519074.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:34.516Z,1520519074.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:34.914Z,1520519074.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:35.308Z,1520519075.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:35.739Z,1520519075.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:36.116Z,1520519076.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:36.542Z,1520519076.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:36.916Z,1520519076.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:37.338Z,1520519077.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:37.710Z,1520519077.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:38.112Z,1520519078.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:38.519Z,1520519078.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:38.939Z,1520519078.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:39.321Z,1520519079.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:39.714Z,1520519079.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:40.117Z,1520519080.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:40.530Z,1520519080.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:40.914Z,1520519080.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:41.313Z,1520519081.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:41.719Z,1520519081.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:42.148Z,1520519082.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:42.547Z,1520519082.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:42.917Z,1520519082.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:43.324Z,1520519083.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:43.727Z,1520519083.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:44.116Z,1520519084.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:44.523Z,1520519084.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:44.928Z,1520519084.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:45.349Z,1520519085.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:45.731Z,1520519085.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:46.135Z,1520519086.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:46.523Z,1520519086.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:46.930Z,1520519086.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:47.315Z,1520519087.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:47.727Z,1520519087.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:48.135Z,1520519088.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:48.535Z,1520519088.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:48.930Z,1520519088.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:49.325Z,1520519089.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:49.723Z,1520519089.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:50.125Z,1520519090.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:50.537Z,1520519090.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:50.935Z,1520519090.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:51.326Z,1520519091.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:51.726Z,1520519091.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:52.123Z,1520519092.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:52.532Z,1520519092.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:52.926Z,1520519092.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:53.331Z,1520519093.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:53.737Z,1520519093.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:54.139Z,1520519094.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:54.531Z,1520519094.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:54.935Z,1520519094.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:55.303Z,1520519095.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:55.731Z,1520519095.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:56.108Z,1520519096.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:56.530Z,1520519096.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:56.926Z,1520519096.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:57.328Z,1520519097.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:57.730Z,1520519097.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:58.132Z,1520519098.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:24:58.501Z,1520519098.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:01.835Z,1520519101.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:01.959Z,1520519101.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:02.335Z,1520519102.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:02.733Z,1520519102.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:03.144Z,1520519103.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:03.553Z,1520519103.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:03.957Z,1520519103.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:04.320Z,1520519104.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:04.753Z,1520519104.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:05.136Z,1520519105.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:05.535Z,1520519105.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:05.920Z,1520519105.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:06.319Z,1520519106.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:06.720Z,1520519106.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:07.123Z,1520519107.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:07.569Z,1520519107.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:07.965Z,1520519107.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:08.369Z,1520519108.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:08.717Z,1520519108.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:09.125Z,1520519109.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:09.522Z,1520519109.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:09.920Z,1520519109.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:10.320Z,1520519110.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:10.732Z,1520519110.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:11.138Z,1520519111.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:11.572Z,1520519111.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:11.922Z,1520519111.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:12.330Z,1520519112.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:12.730Z,1520519112.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:13.131Z,1520519113.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:13.534Z,1520519113.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:13.935Z,1520519113.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:14.334Z,1520519114.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:14.729Z,1520519114.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:15.129Z,1520519115.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:15.507Z,1520519115.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:15.930Z,1520519115.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:16.311Z,1520519116.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:16.738Z,1520519116.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:17.132Z,1520519117.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:17.535Z,1520519117.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:17.939Z,1520519117.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:18.310Z,1520519118.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:18.711Z,1520519118.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:19.141Z,1520519119.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:19.532Z,1520519119.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:19.939Z,1520519119.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:20.342Z,1520519120.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:20.734Z,1520519120.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:21.135Z,1520519121.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:21.514Z,1520519121.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:21.933Z,1520519121.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:22.334Z,1520519122.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:22.739Z,1520519122.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:23.136Z,1520519123.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:23.546Z,1520519123.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:23.915Z,1520519123.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:24.329Z,1520519124.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:24.727Z,1520519124.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:25.122Z,1520519125.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:25.528Z,1520519125.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:25.928Z,1520519125.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:26.334Z,1520519126.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:26.719Z,1520519126.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:27.130Z,1520519127.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:27.556Z,1520519127.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:27.934Z,1520519127.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:28.318Z,1520519128.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:28.729Z,1520519128.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:29.151Z,1520519129.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:29.544Z,1520519129.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:29.927Z,1520519129.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:30.324Z,1520519130.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:30.725Z,1520519130.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:31.127Z,1520519131.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:31.534Z,1520519131.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:31.932Z,1520519131.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:32.337Z,1520519132.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:32.725Z,1520519132.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:33.125Z,1520519133.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:33.526Z,1520519133.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:33.924Z,1520519133.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:34.325Z,1520519134.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:34.732Z,1520519134.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:35.132Z,1520519135.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:35.528Z,1520519135.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:35.914Z,1520519135.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:36.322Z,1520519136.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:36.759Z,1520519136.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:37.129Z,1520519137.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:37.525Z,1520519137.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:37.932Z,1520519137.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:38.330Z,1520519138.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:38.720Z,1520519138.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:39.126Z,1520519139.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:39.523Z,1520519139.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:39.923Z,1520519139.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:40.331Z,1520519140.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:40.774Z,1520519140.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:41.175Z,1520519141.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:41.581Z,1520519141.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:42.020Z,1520519142.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:42.377Z,1520519142.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:42.819Z,1520519142.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:43.144Z,1520519143.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:43.535Z,1520519143.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:43.978Z,1520519143.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:44.358Z,1520519144.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:44.733Z,1520519144.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:45.119Z,1520519145.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:45.630Z,1520519145.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:45.914Z,1520519145.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:46.327Z,1520519146.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:46.740Z,1520519146.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:47.130Z,1520519147.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:47.533Z,1520519147.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:47.939Z,1520519147.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:48.334Z,1520519148.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:48.742Z,1520519148.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:49.121Z,1520519149.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:49.535Z,1520519149.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:49.939Z,1520519149.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:50.332Z,1520519150.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:50.730Z,1520519150.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:51.131Z,1520519151.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:51.574Z,1520519151.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:51.925Z,1520519151.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:52.325Z,1520519152.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:52.740Z,1520519152.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:53.133Z,1520519153.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:53.532Z,1520519153.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:53.926Z,1520519153.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:54.325Z,1520519154.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:54.724Z,1520519154.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:55.131Z,1520519155.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:55.538Z,1520519155.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:55.943Z,1520519155.943 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:55.943Z,1520519155.943 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 134
2018-03-08T14:25:55.943Z,1520519155.943 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T14:25:55.945Z,1520519155.945 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:55.945Z,1520519155.945 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 134
2018-03-08T14:25:55.945Z,1520519155.945 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T14:25:55.947Z,1520519155.947 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:55.947Z,1520519155.947 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 134
2018-03-08T14:25:55.947Z,1520519155.947 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T14:25:55.987Z,1520519155.987 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T14:25:55.987Z,1520519155.987 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T14:25:55.987Z,1520519155.987 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T14:25:56.389Z,1520519156.389 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T14:25:56.389Z,1520519156.389 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 134
2018-03-08T14:25:56.390Z,1520519156.390 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T14:25:56.390Z,1520519156.390 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 134
2018-03-08T14:25:56.390Z,1520519156.390 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T14:25:56.390Z,1520519156.390 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 134
2018-03-08T14:25:56.741Z,1520519156.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T14:25:56.742Z,1520519156.742 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:25:56.742Z,1520519156.742 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:25:56.742Z,1520519156.742 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T14:25:56.743Z,1520519156.743 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:25:56.743Z,1520519156.743 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:25:56.743Z,1520519156.743 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T14:25:56.744Z,1520519156.744 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:25:56.744Z,1520519156.744 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:25:57.119Z,1520519157.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T14:25:57.119Z,1520519157.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:57.518Z,1520519157.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T14:25:57.519Z,1520519157.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:57.918Z,1520519157.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T14:25:57.919Z,1520519157.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:58.319Z,1520519158.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T14:25:58.320Z,1520519158.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:25:58.727Z,1520519158.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T14:25:58.751Z,1520519158.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:02.070Z,1520519162.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T14:26:02.071Z,1520519162.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:02.275Z,1520519162.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2018-03-08T14:26:02.276Z,1520519162.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:02.573Z,1520519162.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2018-03-08T14:26:02.573Z,1520519162.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:02.986Z,1520519162.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2018-03-08T14:26:02.987Z,1520519162.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:03.378Z,1520519163.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2018-03-08T14:26:03.379Z,1520519163.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:03.777Z,1520519163.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2018-03-08T14:26:03.778Z,1520519163.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:04.178Z,1520519164.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2018-03-08T14:26:04.179Z,1520519164.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:04.577Z,1520519164.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2018-03-08T14:26:04.578Z,1520519164.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:04.970Z,1520519164.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2018-03-08T14:26:04.971Z,1520519164.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:05.360Z,1520519165.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2018-03-08T14:26:05.361Z,1520519165.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:05.781Z,1520519165.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2018-03-08T14:26:05.782Z,1520519165.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:06.178Z,1520519166.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2018-03-08T14:26:06.179Z,1520519166.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:06.582Z,1520519166.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2018-03-08T14:26:06.583Z,1520519166.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:06.990Z,1520519166.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2018-03-08T14:26:06.991Z,1520519166.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:07.386Z,1520519167.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2018-03-08T14:26:07.387Z,1520519167.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:07.774Z,1520519167.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2018-03-08T14:26:07.775Z,1520519167.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:08.155Z,1520519168.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2018-03-08T14:26:08.156Z,1520519168.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:08.601Z,1520519168.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2018-03-08T14:26:08.602Z,1520519168.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:08.970Z,1520519168.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2018-03-08T14:26:08.971Z,1520519168.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:09.363Z,1520519169.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2018-03-08T14:26:09.363Z,1520519169.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:09.773Z,1520519169.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2018-03-08T14:26:09.774Z,1520519169.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:10.182Z,1520519170.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2018-03-08T14:26:10.183Z,1520519170.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:10.577Z,1520519170.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2018-03-08T14:26:10.578Z,1520519170.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:10.974Z,1520519170.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2018-03-08T14:26:10.975Z,1520519170.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:11.348Z,1520519171.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2018-03-08T14:26:11.349Z,1520519171.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:11.774Z,1520519171.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-03-08T14:26:11.775Z,1520519171.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:12.157Z,1520519172.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-03-08T14:26:12.158Z,1520519172.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:12.583Z,1520519172.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-03-08T14:26:12.584Z,1520519172.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:12.990Z,1520519172.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-03-08T14:26:12.991Z,1520519172.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:13.381Z,1520519173.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-03-08T14:26:13.382Z,1520519173.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:13.761Z,1520519173.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-03-08T14:26:13.762Z,1520519173.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:14.161Z,1520519174.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-03-08T14:26:14.162Z,1520519174.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:14.559Z,1520519174.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-03-08T14:26:14.559Z,1520519174.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:14.964Z,1520519174.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-03-08T14:26:14.965Z,1520519174.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:15.358Z,1520519175.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-03-08T14:26:15.359Z,1520519175.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:15.794Z,1520519175.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-03-08T14:26:15.795Z,1520519175.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:16.161Z,1520519176.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:16.568Z,1520519176.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:16.977Z,1520519176.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:17.367Z,1520519177.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:17.775Z,1520519177.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:18.167Z,1520519178.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:18.573Z,1520519178.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:18.975Z,1520519178.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:19.376Z,1520519179.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:19.768Z,1520519179.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:20.233Z,1520519180.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:20.568Z,1520519180.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:20.968Z,1520519180.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:21.369Z,1520519181.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:21.778Z,1520519181.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:22.172Z,1520519182.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:22.580Z,1520519182.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:22.966Z,1520519182.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:23.369Z,1520519183.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:23.765Z,1520519183.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:24.166Z,1520519184.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:24.578Z,1520519184.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:24.980Z,1520519184.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:25.385Z,1520519185.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:25.769Z,1520519185.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:26.170Z,1520519186.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:26.572Z,1520519186.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:26.967Z,1520519186.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:27.367Z,1520519187.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:27.777Z,1520519187.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:28.175Z,1520519188.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:28.573Z,1520519188.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:28.978Z,1520519188.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:29.369Z,1520519189.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:29.769Z,1520519189.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:30.171Z,1520519190.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:30.575Z,1520519190.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:30.977Z,1520519190.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:31.386Z,1520519191.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:31.755Z,1520519191.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:32.179Z,1520519192.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:32.561Z,1520519192.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:32.960Z,1520519192.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:33.362Z,1520519193.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:33.790Z,1520519193.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:34.184Z,1520519194.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:34.572Z,1520519194.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:34.963Z,1520519194.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:35.363Z,1520519195.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:35.765Z,1520519195.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:36.164Z,1520519196.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:36.565Z,1520519196.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:36.968Z,1520519196.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:37.374Z,1520519197.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:37.765Z,1520519197.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:38.174Z,1520519198.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:38.566Z,1520519198.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:38.974Z,1520519198.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:39.364Z,1520519199.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:39.769Z,1520519199.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:40.170Z,1520519200.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:40.578Z,1520519200.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:40.969Z,1520519200.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:41.375Z,1520519201.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:41.769Z,1520519201.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:42.163Z,1520519202.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:42.577Z,1520519202.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:42.982Z,1520519202.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:43.377Z,1520519203.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:43.772Z,1520519203.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:44.164Z,1520519204.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:44.564Z,1520519204.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:44.964Z,1520519204.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:45.367Z,1520519205.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:45.778Z,1520519205.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:46.181Z,1520519206.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:46.577Z,1520519206.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:46.968Z,1520519206.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:47.371Z,1520519207.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:47.769Z,1520519207.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:48.175Z,1520519208.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:48.613Z,1520519208.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:48.983Z,1520519208.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:49.383Z,1520519209.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:49.759Z,1520519209.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:50.195Z,1520519210.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:50.571Z,1520519210.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:50.962Z,1520519210.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:51.363Z,1520519211.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:51.771Z,1520519211.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:52.119Z,1520519212.119 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-03-08T14:26:52.119Z,1520519212.119 [DropWeight] Hardware Fault, FailCount= 1
2018-03-08T14:26:52.119Z,1520519212.119 [DropWeight](ERROR): Hardware Fault
2018-03-08T14:26:52.192Z,1520519212.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:52.203Z,1520519212.203 [CBIT](INFO): Critical error at 20180308T142652
2018-03-08T14:26:52.206Z,1520519212.206 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-03-08T14:26:52.206Z,1520519212.206 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-03-08T14:26:52.583Z,1520519212.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:52.610Z,1520519212.610 [CBIT](INFO): Critical error at 20180308T142652
2018-03-08T14:26:52.962Z,1520519212.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:53.375Z,1520519213.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:53.786Z,1520519213.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:54.170Z,1520519214.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:54.576Z,1520519214.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:54.991Z,1520519214.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:55.420Z,1520519215.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:55.775Z,1520519215.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:56.165Z,1520519216.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:56.567Z,1520519216.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:56.968Z,1520519216.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:57.399Z,1520519217.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:57.776Z,1520519217.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:58.181Z,1520519218.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:58.579Z,1520519218.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:26:58.961Z,1520519218.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:02.931Z,1520519222.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:03.033Z,1520519223.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:03.437Z,1520519223.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:03.833Z,1520519223.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:04.238Z,1520519224.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:04.688Z,1520519224.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:05.035Z,1520519225.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:05.435Z,1520519225.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:05.834Z,1520519225.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:06.239Z,1520519226.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:06.641Z,1520519226.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:07.011Z,1520519227.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:07.435Z,1520519227.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:07.833Z,1520519227.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:08.235Z,1520519228.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:08.610Z,1520519228.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:09.015Z,1520519229.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:09.420Z,1520519229.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:09.820Z,1520519229.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:10.216Z,1520519230.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:10.611Z,1520519230.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:11.010Z,1520519231.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:11.424Z,1520519231.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:11.816Z,1520519231.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:12.219Z,1520519232.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:12.610Z,1520519232.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:13.017Z,1520519233.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:13.416Z,1520519233.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:13.821Z,1520519233.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:14.222Z,1520519234.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:14.612Z,1520519234.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:15.015Z,1520519235.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:15.416Z,1520519235.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:15.820Z,1520519235.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:16.215Z,1520519236.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:16.616Z,1520519236.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:17.014Z,1520519237.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:17.416Z,1520519237.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:17.822Z,1520519237.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:18.216Z,1520519238.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:18.616Z,1520519238.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:19.012Z,1520519239.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:19.422Z,1520519239.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:19.820Z,1520519239.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:20.226Z,1520519240.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:20.605Z,1520519240.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:21.012Z,1520519241.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:21.412Z,1520519241.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:21.824Z,1520519241.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:22.229Z,1520519242.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:22.664Z,1520519242.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:23.015Z,1520519243.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:23.412Z,1520519243.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:23.814Z,1520519243.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:24.207Z,1520519244.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:24.619Z,1520519244.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:25.020Z,1520519245.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:25.420Z,1520519245.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:25.812Z,1520519245.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:26.214Z,1520519246.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:26.611Z,1520519246.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:27.012Z,1520519247.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:27.413Z,1520519247.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:27.821Z,1520519247.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:28.227Z,1520519248.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:28.624Z,1520519248.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:29.016Z,1520519249.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:29.415Z,1520519249.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:29.828Z,1520519249.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:30.212Z,1520519250.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:30.622Z,1520519250.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:31.043Z,1520519251.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:31.425Z,1520519251.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:31.838Z,1520519251.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:32.235Z,1520519252.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:32.638Z,1520519252.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:33.044Z,1520519253.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:33.412Z,1520519253.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:33.812Z,1520519253.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:34.237Z,1520519254.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:34.611Z,1520519254.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:35.014Z,1520519255.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:35.438Z,1520519255.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:35.816Z,1520519255.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:36.220Z,1520519256.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:36.611Z,1520519256.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:37.010Z,1520519257.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:37.418Z,1520519257.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:37.838Z,1520519257.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:38.219Z,1520519258.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:38.608Z,1520519258.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:39.009Z,1520519259.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:39.410Z,1520519259.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:39.839Z,1520519259.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:40.216Z,1520519260.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:40.615Z,1520519260.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:41.010Z,1520519261.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:41.414Z,1520519261.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:41.846Z,1520519261.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:42.231Z,1520519262.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:42.627Z,1520519262.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:43.074Z,1520519263.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:43.420Z,1520519263.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:43.815Z,1520519263.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:44.213Z,1520519264.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:44.630Z,1520519264.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:45.025Z,1520519265.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:45.516Z,1520519265.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:45.828Z,1520519265.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:46.231Z,1520519266.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:46.657Z,1520519266.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:47.007Z,1520519267.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:47.434Z,1520519267.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:47.826Z,1520519267.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:48.222Z,1520519268.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:48.614Z,1520519268.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:49.012Z,1520519269.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:49.416Z,1520519269.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:49.828Z,1520519269.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:50.253Z,1520519270.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:50.613Z,1520519270.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:51.012Z,1520519271.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:51.412Z,1520519271.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:51.830Z,1520519271.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:52.231Z,1520519272.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:52.624Z,1520519272.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:53.011Z,1520519273.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:53.419Z,1520519273.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:53.830Z,1520519273.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:54.216Z,1520519274.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:54.659Z,1520519274.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:55.062Z,1520519275.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:55.428Z,1520519275.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:55.827Z,1520519275.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:56.214Z,1520519276.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:56.607Z,1520519276.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:57.026Z,1520519277.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:57.415Z,1520519277.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:57.834Z,1520519277.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:58.235Z,1520519278.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:58.238Z,1520519278.238 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T14:22:58.1Z
2018-03-08T14:27:58.238Z,1520519278.238 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T14:27:58.238Z,1520519278.238 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T14:27:58.626Z,1520519278.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:27:59.173Z,1520519279.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:02.788Z,1520519282.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:02.910Z,1520519282.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:03.222Z,1520519283.222 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20180308T074127/Courier0156.lzma
2018-03-08T14:28:03.295Z,1520519283.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:03.664Z,1520519283.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:04.011Z,1520519284.011 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0156.lzma.bak
2018-03-08T14:28:04.011Z,1520519284.011 [DataOverHttps](INFO): SBD MOMSN=7986445
2018-03-08T14:28:04.079Z,1520519284.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:04.647Z,1520519284.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:04.875Z,1520519284.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:08.010Z,1520519288.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:08.128Z,1520519288.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:08.506Z,1520519288.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:08.923Z,1520519288.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:09.305Z,1520519289.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:09.757Z,1520519289.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:10.083Z,1520519290.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:13.545Z,1520519293.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:13.633Z,1520519293.633 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180308T074127/Express0157.lzma
2018-03-08T14:28:13.721Z,1520519293.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:14.044Z,1520519294.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:14.395Z,1520519294.395 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0157.lzma.bak
2018-03-08T14:28:14.395Z,1520519294.395 [DataOverHttps](INFO): SBD MOMSN=7986449
2018-03-08T14:28:14.455Z,1520519294.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:15.087Z,1520519295.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:15.090Z,1520519295.090 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T14:28:15.090Z,1520519295.090 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T14:28:15.090Z,1520519295.090 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T14:28:15.251Z,1520519295.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:18.436Z,1520519298.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:18.548Z,1520519298.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:18.932Z,1520519298.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:19.329Z,1520519299.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:19.731Z,1520519299.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:20.131Z,1520519300.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:20.514Z,1520519300.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:20.934Z,1520519300.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:21.335Z,1520519301.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:21.710Z,1520519301.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:22.118Z,1520519302.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:22.512Z,1520519302.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:22.912Z,1520519302.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:23.311Z,1520519303.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:23.716Z,1520519303.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:24.155Z,1520519304.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:24.541Z,1520519304.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:24.914Z,1520519304.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:25.315Z,1520519305.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:25.708Z,1520519305.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:26.134Z,1520519306.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:26.518Z,1520519306.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:26.942Z,1520519306.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:27.318Z,1520519307.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:27.739Z,1520519307.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:28.101Z,1520519308.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:28.514Z,1520519308.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:28.913Z,1520519308.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:29.322Z,1520519309.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:29.718Z,1520519309.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:30.116Z,1520519310.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:30.514Z,1520519310.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:30.936Z,1520519310.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:31.315Z,1520519311.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:31.714Z,1520519311.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:32.111Z,1520519312.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:32.537Z,1520519312.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:32.921Z,1520519312.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:33.317Z,1520519313.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:33.714Z,1520519313.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:34.123Z,1520519314.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:34.506Z,1520519314.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:34.915Z,1520519314.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:35.307Z,1520519315.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:35.738Z,1520519315.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:36.121Z,1520519316.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:36.536Z,1520519316.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:36.912Z,1520519316.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:37.310Z,1520519317.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:37.723Z,1520519317.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:38.127Z,1520519318.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:38.568Z,1520519318.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:38.939Z,1520519318.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:39.323Z,1520519319.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:39.722Z,1520519319.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:40.111Z,1520519320.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:40.522Z,1520519320.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:40.926Z,1520519320.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:41.296Z,1520519321.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:41.721Z,1520519321.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:42.139Z,1520519322.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:42.524Z,1520519322.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:42.921Z,1520519322.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:43.318Z,1520519323.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:43.698Z,1520519323.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:44.131Z,1520519324.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:44.535Z,1520519324.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:44.926Z,1520519324.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:45.350Z,1520519325.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:45.738Z,1520519325.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:46.100Z,1520519326.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:46.507Z,1520519326.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:46.950Z,1520519326.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:47.308Z,1520519327.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:47.740Z,1520519327.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:48.115Z,1520519328.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:48.539Z,1520519328.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:48.905Z,1520519328.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:49.311Z,1520519329.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:49.710Z,1520519329.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:50.137Z,1520519330.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:50.542Z,1520519330.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:50.918Z,1520519330.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:51.338Z,1520519331.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:51.738Z,1520519331.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:52.110Z,1520519332.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:52.511Z,1520519332.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:52.911Z,1520519332.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:53.335Z,1520519333.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:53.713Z,1520519333.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:54.118Z,1520519334.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:54.515Z,1520519334.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:54.937Z,1520519334.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:55.308Z,1520519335.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:55.714Z,1520519335.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:56.162Z,1520519336.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:56.563Z,1520519336.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:56.943Z,1520519336.943 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:56.944Z,1520519336.944 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 135
2018-03-08T14:28:56.944Z,1520519336.944 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T14:28:56.950Z,1520519336.950 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:56.950Z,1520519336.950 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 135
2018-03-08T14:28:56.950Z,1520519336.950 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T14:28:56.952Z,1520519336.952 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:56.952Z,1520519336.952 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 135
2018-03-08T14:28:56.952Z,1520519336.952 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T14:28:56.977Z,1520519336.977 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T14:28:56.977Z,1520519336.977 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T14:28:56.977Z,1520519336.977 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T14:28:57.349Z,1520519337.349 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T14:28:57.349Z,1520519337.349 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 135
2018-03-08T14:28:57.349Z,1520519337.349 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T14:28:57.349Z,1520519337.349 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 135
2018-03-08T14:28:57.350Z,1520519337.350 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T14:28:57.350Z,1520519337.350 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 135
2018-03-08T14:28:57.706Z,1520519337.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T14:28:57.707Z,1520519337.707 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:28:57.707Z,1520519337.707 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:28:57.707Z,1520519337.707 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T14:28:57.708Z,1520519337.708 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:28:57.708Z,1520519337.708 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:28:57.709Z,1520519337.709 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T14:28:57.710Z,1520519337.710 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:28:57.710Z,1520519337.710 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:28:58.123Z,1520519338.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T14:28:58.125Z,1520519338.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:58.582Z,1520519338.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T14:28:58.583Z,1520519338.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:58.915Z,1520519338.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T14:28:58.916Z,1520519338.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:59.322Z,1520519339.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T14:28:59.323Z,1520519339.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:28:59.736Z,1520519339.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T14:28:59.741Z,1520519339.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:00.130Z,1520519340.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T14:29:00.131Z,1520519340.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:00.530Z,1520519340.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T14:29:00.531Z,1520519340.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:00.907Z,1520519340.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T14:29:00.908Z,1520519340.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:01.335Z,1520519341.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T14:29:01.336Z,1520519341.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:01.707Z,1520519341.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T14:29:01.710Z,1520519341.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:02.107Z,1520519342.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T14:29:02.108Z,1520519342.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:02.537Z,1520519342.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T14:29:02.538Z,1520519342.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:02.935Z,1520519342.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T14:29:02.936Z,1520519342.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:03.329Z,1520519343.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T14:29:03.330Z,1520519343.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:03.711Z,1520519343.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T14:29:03.712Z,1520519343.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:04.115Z,1520519344.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T14:29:04.116Z,1520519344.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:04.528Z,1520519344.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T14:29:04.544Z,1520519344.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:04.908Z,1520519344.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T14:29:04.910Z,1520519344.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:05.313Z,1520519345.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T14:29:05.314Z,1520519345.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:05.722Z,1520519345.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T14:29:05.723Z,1520519345.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:06.131Z,1520519346.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T14:29:06.132Z,1520519346.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:06.523Z,1520519346.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T14:29:06.524Z,1520519346.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:06.913Z,1520519346.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T14:29:06.914Z,1520519346.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:07.314Z,1520519347.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T14:29:07.314Z,1520519347.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:07.728Z,1520519347.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T14:29:07.729Z,1520519347.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:08.113Z,1520519348.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T14:29:08.114Z,1520519348.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:08.519Z,1520519348.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T14:29:08.520Z,1520519348.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:08.926Z,1520519348.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T14:29:08.927Z,1520519348.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:09.343Z,1520519349.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T14:29:09.344Z,1520519349.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:09.713Z,1520519349.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T14:29:09.715Z,1520519349.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:10.113Z,1520519350.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T14:29:10.114Z,1520519350.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:10.515Z,1520519350.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T14:29:10.516Z,1520519350.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:10.916Z,1520519350.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T14:29:10.918Z,1520519350.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:11.316Z,1520519351.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T14:29:11.317Z,1520519351.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:11.731Z,1520519351.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T14:29:11.732Z,1520519351.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:12.123Z,1520519352.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T14:29:12.124Z,1520519352.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:12.543Z,1520519352.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T14:29:12.544Z,1520519352.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:12.920Z,1520519352.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T14:29:12.921Z,1520519352.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:13.352Z,1520519353.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T14:29:13.353Z,1520519353.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:13.722Z,1520519353.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T14:29:13.723Z,1520519353.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:14.135Z,1520519354.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T14:29:14.136Z,1520519354.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:14.526Z,1520519354.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T14:29:14.527Z,1520519354.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:14.927Z,1520519354.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T14:29:14.928Z,1520519354.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:15.320Z,1520519355.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T14:29:15.321Z,1520519355.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:15.710Z,1520519355.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T14:29:15.711Z,1520519355.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:19.221Z,1520519359.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:19.391Z,1520519359.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:19.714Z,1520519359.714 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T14:29:19.714Z,1520519359.714 [NAL9602] Data Fault, FailCount= 3
2018-03-08T14:29:19.714Z,1520519359.714 [NAL9602](ERROR): Data Fault
2018-03-08T14:29:19.783Z,1520519359.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:19.822Z,1520519359.822 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T14:29:20.110Z,1520519360.110 [NAL9602](INFO): Powering down
2018-03-08T14:29:20.159Z,1520519360.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:20.566Z,1520519360.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:20.955Z,1520519360.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:20.968Z,1520519360.968 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T14:29:20.968Z,1520519360.968 [NAL9602] No Fault, FailCount= 3
2018-03-08T14:29:21.349Z,1520519361.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:21.750Z,1520519361.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:22.154Z,1520519362.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:22.553Z,1520519362.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:22.957Z,1520519362.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:23.363Z,1520519363.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:23.749Z,1520519363.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:24.161Z,1520519364.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:24.554Z,1520519364.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:24.951Z,1520519364.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:25.353Z,1520519365.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:25.759Z,1520519365.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:26.147Z,1520519366.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:26.553Z,1520519366.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:26.963Z,1520519366.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:27.355Z,1520519367.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:27.762Z,1520519367.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:28.155Z,1520519368.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:28.558Z,1520519368.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:28.957Z,1520519368.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:29.359Z,1520519369.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:29.751Z,1520519369.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:30.159Z,1520519370.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:30.555Z,1520519370.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:30.952Z,1520519370.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:31.353Z,1520519371.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:31.756Z,1520519371.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:32.154Z,1520519372.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:32.557Z,1520519372.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:32.963Z,1520519372.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:33.356Z,1520519373.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:33.759Z,1520519373.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:34.155Z,1520519374.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:34.558Z,1520519374.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:34.954Z,1520519374.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:35.356Z,1520519375.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:35.760Z,1520519375.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:36.143Z,1520519376.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:36.569Z,1520519376.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:36.971Z,1520519376.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:37.373Z,1520519377.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:37.739Z,1520519377.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:38.151Z,1520519378.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:38.549Z,1520519378.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:38.946Z,1520519378.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:39.346Z,1520519379.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:39.799Z,1520519379.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:40.146Z,1520519380.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:40.556Z,1520519380.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:40.955Z,1520519380.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:41.360Z,1520519381.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:41.787Z,1520519381.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:42.227Z,1520519382.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:42.545Z,1520519382.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:42.990Z,1520519382.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:43.383Z,1520519383.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:43.750Z,1520519383.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:44.159Z,1520519384.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:44.580Z,1520519384.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:45.003Z,1520519385.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:45.363Z,1520519385.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:45.752Z,1520519385.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:46.206Z,1520519386.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:46.554Z,1520519386.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:46.975Z,1520519386.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:47.369Z,1520519387.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:47.758Z,1520519387.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:48.154Z,1520519388.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:48.560Z,1520519388.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:48.957Z,1520519388.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:49.356Z,1520519389.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:49.758Z,1520519389.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:50.114Z,1520519390.114 [NAL9602](INFO): Powering up NAL9602
2018-03-08T14:29:50.161Z,1520519390.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:50.556Z,1520519390.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:50.959Z,1520519390.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:51.357Z,1520519391.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:51.762Z,1520519391.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:52.157Z,1520519392.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:52.561Z,1520519392.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:52.955Z,1520519392.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:53.361Z,1520519393.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:53.757Z,1520519393.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:54.155Z,1520519394.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:54.556Z,1520519394.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:54.957Z,1520519394.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:55.357Z,1520519395.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:55.759Z,1520519395.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:56.158Z,1520519396.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:56.560Z,1520519396.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:56.958Z,1520519396.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:57.359Z,1520519397.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:57.754Z,1520519397.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:58.151Z,1520519398.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:58.561Z,1520519398.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:58.966Z,1520519398.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:59.338Z,1520519399.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:29:59.765Z,1520519399.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:00.163Z,1520519400.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:00.545Z,1520519400.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:00.970Z,1520519400.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:01.322Z,1520519401.322 [NAL9602](INFO): NAL9602 initialized
2018-03-08T14:30:01.375Z,1520519401.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:01.747Z,1520519401.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:02.171Z,1520519402.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:02.574Z,1520519402.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:02.968Z,1520519402.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:03.370Z,1520519403.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:03.754Z,1520519403.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:04.150Z,1520519404.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:04.548Z,1520519404.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:04.957Z,1520519404.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:05.381Z,1520519405.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:05.779Z,1520519405.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:06.155Z,1520519406.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:06.552Z,1520519406.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:06.978Z,1520519406.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:07.379Z,1520519407.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:07.758Z,1520519407.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:08.152Z,1520519408.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:08.579Z,1520519408.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:08.957Z,1520519408.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:09.357Z,1520519409.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:09.753Z,1520519409.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:10.162Z,1520519410.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:10.570Z,1520519410.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:10.979Z,1520519410.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:11.371Z,1520519411.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:11.763Z,1520519411.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:12.162Z,1520519412.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:12.562Z,1520519412.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:12.966Z,1520519412.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:13.370Z,1520519413.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:13.797Z,1520519413.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:14.158Z,1520519414.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:14.558Z,1520519414.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:14.975Z,1520519414.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:15.368Z,1520519415.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:15.858Z,1520519415.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:19.962Z,1520519419.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:20.107Z,1520519420.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:20.514Z,1520519420.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:20.904Z,1520519420.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:21.276Z,1520519421.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:21.677Z,1520519421.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:22.066Z,1520519422.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:22.471Z,1520519422.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:22.864Z,1520519422.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:23.274Z,1520519423.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:23.675Z,1520519423.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:24.075Z,1520519424.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:24.466Z,1520519424.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:24.871Z,1520519424.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:25.265Z,1520519425.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:25.667Z,1520519425.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:26.072Z,1520519426.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:26.476Z,1520519426.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:26.872Z,1520519426.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:27.261Z,1520519427.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:27.697Z,1520519427.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:28.069Z,1520519428.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:28.465Z,1520519428.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:28.869Z,1520519428.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:29.289Z,1520519429.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:29.669Z,1520519429.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:30.072Z,1520519430.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:30.481Z,1520519430.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:30.856Z,1520519430.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:31.268Z,1520519431.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:31.666Z,1520519431.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:32.071Z,1520519432.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:32.475Z,1520519432.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:32.871Z,1520519432.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:33.261Z,1520519433.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:33.661Z,1520519433.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:34.103Z,1520519434.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:34.463Z,1520519434.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:34.867Z,1520519434.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:35.278Z,1520519435.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:35.671Z,1520519435.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:36.079Z,1520519436.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:36.468Z,1520519436.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:36.870Z,1520519436.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:37.270Z,1520519437.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:37.675Z,1520519437.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:38.077Z,1520519438.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:38.476Z,1520519438.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:38.874Z,1520519438.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:39.310Z,1520519439.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:39.672Z,1520519439.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:40.077Z,1520519440.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:40.474Z,1520519440.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:40.867Z,1520519440.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:41.282Z,1520519441.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:41.701Z,1520519441.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:42.104Z,1520519442.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:42.485Z,1520519442.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:42.856Z,1520519442.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:43.260Z,1520519443.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:43.662Z,1520519443.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:44.084Z,1520519444.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:44.484Z,1520519444.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:44.886Z,1520519444.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:45.261Z,1520519445.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:45.666Z,1520519445.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:46.059Z,1520519446.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:46.467Z,1520519446.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:46.861Z,1520519446.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:47.289Z,1520519447.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:47.702Z,1520519447.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:48.064Z,1520519448.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:48.500Z,1520519448.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:48.861Z,1520519448.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:49.261Z,1520519449.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:49.678Z,1520519449.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:50.075Z,1520519450.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:50.483Z,1520519450.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:50.887Z,1520519450.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:51.255Z,1520519451.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:51.665Z,1520519451.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:52.060Z,1520519452.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:52.468Z,1520519452.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:52.862Z,1520519452.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:53.291Z,1520519453.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:53.664Z,1520519453.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:54.068Z,1520519454.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:54.498Z,1520519454.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:54.861Z,1520519454.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:55.276Z,1520519455.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:55.674Z,1520519455.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:56.083Z,1520519456.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:56.481Z,1520519456.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:56.873Z,1520519456.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:57.248Z,1520519457.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:57.672Z,1520519457.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:58.049Z,1520519458.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:58.474Z,1520519458.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:58.854Z,1520519458.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:59.281Z,1520519459.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:30:59.684Z,1520519459.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:00.082Z,1520519460.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:00.462Z,1520519460.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:00.858Z,1520519460.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:01.263Z,1520519461.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:01.663Z,1520519461.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:02.066Z,1520519462.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:02.495Z,1520519462.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:02.865Z,1520519462.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:03.297Z,1520519463.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:03.671Z,1520519463.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:04.067Z,1520519464.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:04.462Z,1520519464.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:04.865Z,1520519464.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:05.307Z,1520519465.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:05.675Z,1520519465.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:06.074Z,1520519466.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:06.466Z,1520519466.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:06.871Z,1520519466.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:07.263Z,1520519467.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:07.675Z,1520519467.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:08.076Z,1520519468.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:08.475Z,1520519468.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:08.877Z,1520519468.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:09.300Z,1520519469.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:09.663Z,1520519469.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:10.066Z,1520519470.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:10.471Z,1520519470.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:10.870Z,1520519470.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:11.277Z,1520519471.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:11.699Z,1520519471.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:12.079Z,1520519472.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:12.477Z,1520519472.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:12.874Z,1520519472.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:13.278Z,1520519473.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:13.660Z,1520519473.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:14.088Z,1520519474.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:14.500Z,1520519474.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:14.908Z,1520519474.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:15.271Z,1520519475.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:15.671Z,1520519475.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:16.071Z,1520519476.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:19.209Z,1520519479.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:19.351Z,1520519479.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:19.718Z,1520519479.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:20.115Z,1520519480.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:20.499Z,1520519480.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:20.907Z,1520519480.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:21.282Z,1520519481.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:21.682Z,1520519481.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:22.110Z,1520519482.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:22.519Z,1520519482.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:22.890Z,1520519482.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:23.284Z,1520519483.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:23.683Z,1520519483.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:24.083Z,1520519484.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:24.482Z,1520519484.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:24.882Z,1520519484.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:25.283Z,1520519485.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:25.690Z,1520519485.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:26.114Z,1520519486.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:26.495Z,1520519486.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:26.886Z,1520519486.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:27.291Z,1520519487.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:27.683Z,1520519487.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:28.098Z,1520519488.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:28.496Z,1520519488.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:28.889Z,1520519488.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:29.293Z,1520519489.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:29.693Z,1520519489.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:30.095Z,1520519490.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:30.490Z,1520519490.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:30.906Z,1520519490.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:31.307Z,1520519491.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:31.703Z,1520519491.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:32.097Z,1520519492.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:32.479Z,1520519492.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:32.879Z,1520519492.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:33.286Z,1520519493.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:33.680Z,1520519493.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:34.095Z,1520519494.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:34.500Z,1520519494.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:34.892Z,1520519494.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:35.291Z,1520519495.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:35.689Z,1520519495.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:36.098Z,1520519496.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:36.487Z,1520519496.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:36.890Z,1520519496.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:37.292Z,1520519497.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:37.705Z,1520519497.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:38.107Z,1520519498.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:38.494Z,1520519498.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:38.894Z,1520519498.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:39.288Z,1520519499.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:39.679Z,1520519499.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:40.093Z,1520519500.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:40.507Z,1520519500.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:40.912Z,1520519500.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:41.293Z,1520519501.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:41.702Z,1520519501.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:42.071Z,1520519502.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:42.480Z,1520519502.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:42.883Z,1520519502.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:43.285Z,1520519503.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:43.726Z,1520519503.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:44.115Z,1520519504.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:44.526Z,1520519504.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:44.886Z,1520519504.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:45.284Z,1520519505.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:45.675Z,1520519505.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:46.096Z,1520519506.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:46.492Z,1520519506.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:46.895Z,1520519506.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:47.296Z,1520519507.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:47.686Z,1520519507.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:48.079Z,1520519508.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:48.484Z,1520519508.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:48.887Z,1520519508.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:49.293Z,1520519509.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:49.695Z,1520519509.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:49.728Z,1520519509.728 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T14:31:50.091Z,1520519510.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:50.496Z,1520519510.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:50.890Z,1520519510.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:51.287Z,1520519511.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:51.679Z,1520519511.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:52.133Z,1520519512.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:52.527Z,1520519512.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:52.891Z,1520519512.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:53.284Z,1520519513.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:53.696Z,1520519513.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:54.097Z,1520519514.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:54.483Z,1520519514.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:54.899Z,1520519514.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:55.305Z,1520519515.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:55.734Z,1520519515.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:56.097Z,1520519516.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:56.490Z,1520519516.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:56.900Z,1520519516.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:57.286Z,1520519517.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:57.691Z,1520519517.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:58.137Z,1520519518.137 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:58.137Z,1520519518.137 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 136
2018-03-08T14:31:58.137Z,1520519518.137 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T14:31:58.139Z,1520519518.139 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:58.139Z,1520519518.139 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 136
2018-03-08T14:31:58.139Z,1520519518.139 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T14:31:58.145Z,1520519518.145 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:58.145Z,1520519518.145 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 136
2018-03-08T14:31:58.145Z,1520519518.145 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T14:31:58.186Z,1520519518.186 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T14:31:58.186Z,1520519518.186 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T14:31:58.186Z,1520519518.186 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T14:31:58.540Z,1520519518.540 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T14:31:58.540Z,1520519518.540 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 136
2018-03-08T14:31:58.549Z,1520519518.549 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T14:31:58.549Z,1520519518.549 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 136
2018-03-08T14:31:58.550Z,1520519518.550 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T14:31:58.550Z,1520519518.550 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 136
2018-03-08T14:31:58.902Z,1520519518.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T14:31:58.902Z,1520519518.902 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:31:58.902Z,1520519518.902 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:31:58.903Z,1520519518.903 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T14:31:58.903Z,1520519518.903 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:31:58.903Z,1520519518.903 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:31:58.904Z,1520519518.904 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T14:31:58.904Z,1520519518.904 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:31:58.905Z,1520519518.905 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:31:59.279Z,1520519519.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T14:31:59.280Z,1520519519.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:31:59.679Z,1520519519.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T14:31:59.680Z,1520519519.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:00.083Z,1520519520.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T14:32:00.083Z,1520519520.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:00.481Z,1520519520.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T14:32:00.482Z,1520519520.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:00.914Z,1520519520.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T14:32:00.916Z,1520519520.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:01.289Z,1520519521.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T14:32:01.290Z,1520519521.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:01.691Z,1520519521.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T14:32:01.693Z,1520519521.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:02.083Z,1520519522.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T14:32:02.084Z,1520519522.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:02.487Z,1520519522.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T14:32:02.488Z,1520519522.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:02.881Z,1520519522.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T14:32:02.882Z,1520519522.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:03.284Z,1520519523.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T14:32:03.285Z,1520519523.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:03.784Z,1520519523.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T14:32:03.790Z,1520519523.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:04.088Z,1520519524.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T14:32:04.090Z,1520519524.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:04.487Z,1520519524.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T14:32:04.488Z,1520519524.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:04.895Z,1520519524.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T14:32:04.896Z,1520519524.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:05.274Z,1520519525.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T14:32:05.275Z,1520519525.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:05.720Z,1520519525.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T14:32:05.725Z,1520519525.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:06.086Z,1520519526.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T14:32:06.087Z,1520519526.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:06.496Z,1520519526.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T14:32:06.497Z,1520519526.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:06.880Z,1520519526.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T14:32:06.881Z,1520519526.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:07.288Z,1520519527.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T14:32:07.289Z,1520519527.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:07.695Z,1520519527.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T14:32:07.697Z,1520519527.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:08.100Z,1520519528.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T14:32:08.101Z,1520519528.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:08.490Z,1520519528.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T14:32:08.491Z,1520519528.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:08.890Z,1520519528.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T14:32:08.891Z,1520519528.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:09.289Z,1520519529.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T14:32:09.290Z,1520519529.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:09.696Z,1520519529.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T14:32:09.697Z,1520519529.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:10.091Z,1520519530.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T14:32:10.092Z,1520519530.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:10.502Z,1520519530.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T14:32:10.503Z,1520519530.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:10.894Z,1520519530.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T14:32:10.895Z,1520519530.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:11.283Z,1520519531.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T14:32:11.284Z,1520519531.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:11.685Z,1520519531.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T14:32:11.686Z,1520519531.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:12.184Z,1520519532.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-08T14:32:12.185Z,1520519532.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:12.487Z,1520519532.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T14:32:12.488Z,1520519532.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:12.891Z,1520519532.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T14:32:12.893Z,1520519532.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:13.295Z,1520519533.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T14:32:13.297Z,1520519533.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:13.695Z,1520519533.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T14:32:13.696Z,1520519533.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:14.096Z,1520519534.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T14:32:14.098Z,1520519534.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:14.489Z,1520519534.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T14:32:14.491Z,1520519534.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:14.886Z,1520519534.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T14:32:14.887Z,1520519534.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:15.286Z,1520519535.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T14:32:15.287Z,1520519535.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:15.690Z,1520519535.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T14:32:15.691Z,1520519535.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:16.100Z,1520519536.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T14:32:16.101Z,1520519536.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:19.199Z,1520519539.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:19.335Z,1520519539.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:19.686Z,1520519539.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:20.082Z,1520519540.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:20.496Z,1520519540.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:20.875Z,1520519540.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:21.273Z,1520519541.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:21.697Z,1520519541.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:22.073Z,1520519542.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:22.470Z,1520519542.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:22.884Z,1520519542.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:23.279Z,1520519543.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:23.733Z,1520519543.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:24.102Z,1520519544.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:24.528Z,1520519544.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:24.930Z,1520519544.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:25.276Z,1520519545.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:25.683Z,1520519545.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:26.076Z,1520519546.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:26.475Z,1520519546.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:26.880Z,1520519546.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:27.281Z,1520519547.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:27.688Z,1520519547.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:28.083Z,1520519548.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:28.479Z,1520519548.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:28.882Z,1520519548.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:29.275Z,1520519549.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:29.679Z,1520519549.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:30.084Z,1520519550.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:30.490Z,1520519550.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:30.885Z,1520519550.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:31.282Z,1520519551.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:31.683Z,1520519551.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:32.078Z,1520519552.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:32.475Z,1520519552.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:32.903Z,1520519552.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:33.284Z,1520519553.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:33.697Z,1520519553.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:34.095Z,1520519554.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:34.498Z,1520519554.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:34.874Z,1520519554.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:35.273Z,1520519555.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:35.675Z,1520519555.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:36.077Z,1520519556.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:36.476Z,1520519556.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:36.906Z,1520519556.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:37.286Z,1520519557.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:37.675Z,1520519557.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:38.078Z,1520519558.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:38.514Z,1520519558.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:38.881Z,1520519558.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:39.294Z,1520519559.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:39.706Z,1520519559.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:40.095Z,1520519560.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:40.462Z,1520519560.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:40.892Z,1520519560.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:41.272Z,1520519561.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:41.675Z,1520519561.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:42.093Z,1520519562.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:42.500Z,1520519562.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:42.907Z,1520519562.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:43.274Z,1520519563.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:43.673Z,1520519563.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:44.070Z,1520519564.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:44.467Z,1520519564.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:44.909Z,1520519564.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:45.285Z,1520519565.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:45.686Z,1520519565.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:46.079Z,1520519566.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:46.517Z,1520519566.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:46.867Z,1520519566.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:47.293Z,1520519567.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:47.661Z,1520519567.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:48.106Z,1520519568.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:48.491Z,1520519568.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:48.892Z,1520519568.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:49.269Z,1520519569.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:49.680Z,1520519569.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:50.069Z,1520519570.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:50.471Z,1520519570.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:50.876Z,1520519570.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:51.276Z,1520519571.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:51.687Z,1520519571.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:52.082Z,1520519572.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:52.483Z,1520519572.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:52.872Z,1520519572.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:53.277Z,1520519573.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:53.678Z,1520519573.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:54.081Z,1520519574.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:54.498Z,1520519574.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:54.882Z,1520519574.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:55.273Z,1520519575.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:55.686Z,1520519575.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:56.083Z,1520519576.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:56.487Z,1520519576.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:56.898Z,1520519576.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:57.307Z,1520519577.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:57.680Z,1520519577.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:58.090Z,1520519578.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:58.466Z,1520519578.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:58.862Z,1520519578.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:59.270Z,1520519579.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:32:59.667Z,1520519579.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:00.098Z,1520519580.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:00.501Z,1520519580.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:00.876Z,1520519580.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:01.266Z,1520519581.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:01.678Z,1520519581.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:02.065Z,1520519582.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:02.469Z,1520519582.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:02.875Z,1520519582.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:03.283Z,1520519583.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:03.674Z,1520519583.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:04.084Z,1520519584.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:04.474Z,1520519584.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:04.867Z,1520519584.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:05.270Z,1520519585.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:05.669Z,1520519585.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:06.075Z,1520519586.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:06.481Z,1520519586.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:06.910Z,1520519586.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:07.265Z,1520519587.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:07.679Z,1520519587.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:08.078Z,1520519588.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:08.478Z,1520519588.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:08.878Z,1520519588.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:09.298Z,1520519589.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:09.695Z,1520519589.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:10.080Z,1520519590.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:10.482Z,1520519590.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:10.855Z,1520519590.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:11.281Z,1520519591.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:11.682Z,1520519591.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:12.103Z,1520519592.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:12.499Z,1520519592.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:12.907Z,1520519592.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:13.256Z,1520519593.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:13.683Z,1520519593.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:14.071Z,1520519594.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:14.466Z,1520519594.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:14.874Z,1520519594.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:15.312Z,1520519595.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:15.315Z,1520519595.315 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T14:33:15.315Z,1520519595.315 [Default:CheckIn:C.Wait] Stopped
2018-03-08T14:33:15.316Z,1520519595.316 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T14:33:15.316Z,1520519595.316 [Default:CheckIn:D] Running Loop=1
2018-03-08T14:33:15.695Z,1520519595.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:15.703Z,1520519595.703 [Default:CheckIn:D] Stopped
2018-03-08T14:33:15.703Z,1520519595.703 [Default:CheckIn:E] Running Loop=1
2018-03-08T14:33:16.104Z,1520519596.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:16.109Z,1520519596.109 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 407.514974 min 
2018-03-08T14:33:16.109Z,1520519596.109 [Default:CheckIn:E] Stopped
2018-03-08T14:33:16.109Z,1520519596.109 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T14:33:16.110Z,1520519596.110 [Default:CheckIn] Stopped
2018-03-08T14:33:16.110Z,1520519596.110 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T14:33:16.110Z,1520519596.110 [Default:CheckIn](INFO): Running loop #40
2018-03-08T14:33:16.110Z,1520519596.110 [Default:CheckIn] Running Loop=40
2018-03-08T14:33:16.110Z,1520519596.110 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T14:33:16.111Z,1520519596.111 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T14:33:16.479Z,1520519596.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:20.019Z,1520519600.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:20.184Z,1520519600.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:20.572Z,1520519600.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:20.966Z,1520519600.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:21.363Z,1520519601.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:21.736Z,1520519601.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:22.143Z,1520519602.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:22.568Z,1520519602.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:22.953Z,1520519602.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:23.383Z,1520519603.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:23.751Z,1520519603.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:24.145Z,1520519604.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:24.543Z,1520519604.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:24.952Z,1520519604.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:25.367Z,1520519605.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:25.750Z,1520519605.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:26.143Z,1520519606.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:26.546Z,1520519606.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:26.967Z,1520519606.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:27.386Z,1520519607.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:27.770Z,1520519607.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:28.180Z,1520519608.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:28.569Z,1520519608.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:28.969Z,1520519608.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:29.349Z,1520519609.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:29.768Z,1520519609.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:30.199Z,1520519610.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:30.565Z,1520519610.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:30.974Z,1520519610.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:31.364Z,1520519611.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:31.787Z,1520519611.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:32.157Z,1520519612.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:32.561Z,1520519612.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:32.962Z,1520519612.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:33.381Z,1520519613.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:33.771Z,1520519613.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:34.195Z,1520519614.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:34.548Z,1520519614.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:34.996Z,1520519614.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:35.387Z,1520519615.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:35.778Z,1520519615.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:36.148Z,1520519616.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:36.546Z,1520519616.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:36.971Z,1520519616.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:37.369Z,1520519617.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:37.750Z,1520519617.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:38.155Z,1520519618.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:38.553Z,1520519618.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:38.954Z,1520519618.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:39.381Z,1520519619.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:39.785Z,1520519619.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:40.154Z,1520519620.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:40.549Z,1520519620.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:40.996Z,1520519620.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:41.355Z,1520519621.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:41.858Z,1520519621.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:42.161Z,1520519622.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:42.607Z,1520519622.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:43.020Z,1520519623.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:43.363Z,1520519623.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:43.754Z,1520519623.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:44.157Z,1520519624.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:44.574Z,1520519624.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:44.990Z,1520519624.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:45.362Z,1520519625.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:45.759Z,1520519625.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:46.156Z,1520519626.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:46.579Z,1520519626.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:46.964Z,1520519626.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:47.373Z,1520519627.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:47.771Z,1520519627.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:48.167Z,1520519628.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:48.544Z,1520519628.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:48.967Z,1520519628.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:49.365Z,1520519629.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:49.766Z,1520519629.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:50.146Z,1520519630.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:50.546Z,1520519630.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:50.974Z,1520519630.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:51.353Z,1520519631.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:51.776Z,1520519631.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:52.147Z,1520519632.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:52.550Z,1520519632.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:52.973Z,1520519632.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:53.353Z,1520519633.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:53.774Z,1520519633.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:54.148Z,1520519634.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:54.555Z,1520519634.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:54.974Z,1520519634.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:55.352Z,1520519635.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:55.755Z,1520519635.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:56.151Z,1520519636.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:56.547Z,1520519636.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:56.974Z,1520519636.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:57.374Z,1520519637.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:57.772Z,1520519637.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:58.149Z,1520519638.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:58.547Z,1520519638.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:58.977Z,1520519638.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:59.359Z,1520519639.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:33:59.757Z,1520519639.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:00.151Z,1520519640.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:00.554Z,1520519640.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:00.963Z,1520519640.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:01.362Z,1520519641.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:01.760Z,1520519641.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:02.158Z,1520519642.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:02.555Z,1520519642.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:02.961Z,1520519642.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:03.371Z,1520519643.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:03.765Z,1520519643.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:04.154Z,1520519644.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:04.548Z,1520519644.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:04.974Z,1520519644.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:05.371Z,1520519645.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:05.775Z,1520519645.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:06.144Z,1520519646.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:06.539Z,1520519646.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:06.971Z,1520519646.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:07.374Z,1520519647.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:07.765Z,1520519647.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:08.148Z,1520519648.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:08.548Z,1520519648.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:08.991Z,1520519648.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:09.379Z,1520519649.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:09.778Z,1520519649.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:10.151Z,1520519650.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:10.558Z,1520519650.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:10.994Z,1520519650.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:11.354Z,1520519651.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:11.763Z,1520519651.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:12.147Z,1520519652.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:12.550Z,1520519652.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:12.953Z,1520519652.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:13.357Z,1520519653.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:13.763Z,1520519653.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:14.158Z,1520519654.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:14.562Z,1520519654.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:14.966Z,1520519654.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:15.364Z,1520519655.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:15.779Z,1520519655.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:16.155Z,1520519656.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:16.562Z,1520519656.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:19.685Z,1520519659.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:19.810Z,1520519659.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:20.205Z,1520519660.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:20.582Z,1520519660.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:20.997Z,1520519660.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:21.387Z,1520519661.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:21.783Z,1520519661.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:22.214Z,1520519662.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:22.593Z,1520519662.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:23.022Z,1520519663.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:23.380Z,1520519663.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:23.794Z,1520519663.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:24.187Z,1520519664.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:24.587Z,1520519664.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:25.008Z,1520519665.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:25.449Z,1520519665.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:25.802Z,1520519665.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:26.191Z,1520519666.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:26.602Z,1520519666.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:26.993Z,1520519666.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:27.392Z,1520519667.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:27.811Z,1520519667.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:28.201Z,1520519668.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:28.608Z,1520519668.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:29.014Z,1520519669.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:29.391Z,1520519669.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:29.797Z,1520519669.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:30.199Z,1520519670.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:30.575Z,1520519670.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:31.011Z,1520519671.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:31.418Z,1520519671.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:31.799Z,1520519671.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:32.201Z,1520519672.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:32.603Z,1520519672.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:33.001Z,1520519673.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:33.398Z,1520519673.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:33.803Z,1520519673.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:34.204Z,1520519674.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:34.608Z,1520519674.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:35.006Z,1520519675.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:35.378Z,1520519675.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:35.781Z,1520519675.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:36.180Z,1520519676.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:36.587Z,1520519676.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:37.011Z,1520519677.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:37.410Z,1520519677.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:37.812Z,1520519677.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:38.187Z,1520519678.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:38.583Z,1520519678.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:38.987Z,1520519678.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:39.399Z,1520519679.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:39.793Z,1520519679.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:40.193Z,1520519680.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:40.618Z,1520519680.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:41.019Z,1520519681.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:41.394Z,1520519681.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:41.791Z,1520519681.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:42.190Z,1520519682.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:42.586Z,1520519682.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:42.993Z,1520519682.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:43.393Z,1520519683.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:43.816Z,1520519683.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:44.225Z,1520519684.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:44.595Z,1520519684.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:44.995Z,1520519684.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:45.393Z,1520519685.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:45.792Z,1520519685.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:46.218Z,1520519686.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:46.597Z,1520519686.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:46.993Z,1520519686.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:47.395Z,1520519687.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:47.784Z,1520519687.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:48.190Z,1520519688.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:48.590Z,1520519688.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:48.994Z,1520519688.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:49.396Z,1520519689.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:49.795Z,1520519689.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:50.195Z,1520519690.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:50.595Z,1520519690.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:50.991Z,1520519690.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:51.395Z,1520519691.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:51.786Z,1520519691.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:52.193Z,1520519692.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:52.598Z,1520519692.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:53.029Z,1520519693.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:53.398Z,1520519693.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:53.814Z,1520519693.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:54.191Z,1520519694.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:54.588Z,1520519694.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:55.010Z,1520519695.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:55.404Z,1520519695.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:55.806Z,1520519695.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:56.189Z,1520519696.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:56.590Z,1520519696.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:56.995Z,1520519696.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:57.393Z,1520519697.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:57.800Z,1520519697.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:58.228Z,1520519698.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:58.610Z,1520519698.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:59.009Z,1520519699.009 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:59.009Z,1520519699.009 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 137
2018-03-08T14:34:59.009Z,1520519699.009 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T14:34:59.010Z,1520519699.010 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:59.011Z,1520519699.011 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 137
2018-03-08T14:34:59.011Z,1520519699.011 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T14:34:59.012Z,1520519699.012 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:34:59.012Z,1520519699.012 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 137
2018-03-08T14:34:59.012Z,1520519699.012 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T14:34:59.067Z,1520519699.067 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T14:34:59.067Z,1520519699.067 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T14:34:59.067Z,1520519699.067 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T14:34:59.413Z,1520519699.413 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T14:34:59.413Z,1520519699.413 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 137
2018-03-08T14:34:59.413Z,1520519699.413 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T14:34:59.413Z,1520519699.413 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 137
2018-03-08T14:34:59.414Z,1520519699.414 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T14:34:59.414Z,1520519699.414 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 137
2018-03-08T14:34:59.797Z,1520519699.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T14:34:59.797Z,1520519699.797 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:34:59.798Z,1520519699.798 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:34:59.798Z,1520519699.798 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T14:34:59.799Z,1520519699.799 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:34:59.799Z,1520519699.799 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:34:59.799Z,1520519699.799 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T14:34:59.800Z,1520519699.800 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:34:59.800Z,1520519699.800 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:35:00.200Z,1520519700.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T14:35:00.201Z,1520519700.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:00.597Z,1520519700.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T14:35:00.598Z,1520519700.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:01.007Z,1520519701.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T14:35:01.007Z,1520519701.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:01.402Z,1520519701.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T14:35:01.403Z,1520519701.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:01.806Z,1520519701.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T14:35:01.807Z,1520519701.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:02.197Z,1520519702.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T14:35:02.198Z,1520519702.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:02.601Z,1520519702.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T14:35:02.602Z,1520519702.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:02.996Z,1520519702.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T14:35:02.997Z,1520519702.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:03.396Z,1520519703.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T14:35:03.397Z,1520519703.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:03.801Z,1520519703.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T14:35:03.802Z,1520519703.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:04.206Z,1520519704.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T14:35:04.207Z,1520519704.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:04.614Z,1520519704.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T14:35:04.615Z,1520519704.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:05.010Z,1520519705.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T14:35:05.011Z,1520519705.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:05.401Z,1520519705.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T14:35:05.402Z,1520519705.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:05.794Z,1520519705.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T14:35:05.795Z,1520519705.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:06.194Z,1520519706.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T14:35:06.195Z,1520519706.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:06.622Z,1520519706.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T14:35:06.623Z,1520519706.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:06.999Z,1520519706.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T14:35:06.000Z,1520519707.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:07.437Z,1520519707.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T14:35:07.438Z,1520519707.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:07.839Z,1520519707.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T14:35:07.840Z,1520519707.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:08.199Z,1520519708.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T14:35:08.200Z,1520519708.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:08.589Z,1520519708.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T14:35:08.590Z,1520519708.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:08.994Z,1520519708.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T14:35:08.995Z,1520519708.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:09.391Z,1520519709.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T14:35:09.392Z,1520519709.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:09.793Z,1520519709.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T14:35:09.794Z,1520519709.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:10.206Z,1520519710.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T14:35:10.207Z,1520519710.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:10.598Z,1520519710.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T14:35:10.599Z,1520519710.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:11.006Z,1520519711.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T14:35:11.007Z,1520519711.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:11.396Z,1520519711.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T14:35:11.401Z,1520519711.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:11.802Z,1520519711.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T14:35:11.803Z,1520519711.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:12.189Z,1520519712.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T14:35:12.190Z,1520519712.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:12.598Z,1520519712.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T14:35:12.599Z,1520519712.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:13.010Z,1520519713.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T14:35:13.011Z,1520519713.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:13.410Z,1520519713.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T14:35:13.411Z,1520519713.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:13.804Z,1520519713.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T14:35:13.805Z,1520519713.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:14.194Z,1520519714.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T14:35:14.195Z,1520519714.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:14.589Z,1520519714.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T14:35:14.590Z,1520519714.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:14.989Z,1520519714.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T14:35:14.990Z,1520519714.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:15.394Z,1520519715.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T14:35:15.395Z,1520519715.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:15.789Z,1520519715.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T14:35:15.790Z,1520519715.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:16.204Z,1520519716.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T14:35:16.205Z,1520519716.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:16.628Z,1520519716.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T14:35:16.633Z,1520519716.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:19.733Z,1520519719.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:19.863Z,1520519719.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:20.204Z,1520519720.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:20.602Z,1520519720.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:21.029Z,1520519721.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:21.430Z,1520519721.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:21.833Z,1520519721.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:22.229Z,1520519722.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:22.611Z,1520519722.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:23.042Z,1520519723.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:23.443Z,1520519723.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:23.804Z,1520519723.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:24.214Z,1520519724.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:24.608Z,1520519724.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:25.008Z,1520519725.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:25.407Z,1520519725.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:25.803Z,1520519725.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:26.206Z,1520519726.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:26.607Z,1520519726.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:27.009Z,1520519727.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:27.413Z,1520519727.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:27.814Z,1520519727.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:28.197Z,1520519728.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:28.606Z,1520519728.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:29.005Z,1520519729.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:29.411Z,1520519729.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:29.805Z,1520519729.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:30.208Z,1520519730.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:30.607Z,1520519730.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:31.015Z,1520519731.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:31.406Z,1520519731.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:31.799Z,1520519731.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:32.210Z,1520519732.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:32.606Z,1520519732.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:33.013Z,1520519733.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:33.444Z,1520519733.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:33.822Z,1520519733.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:34.203Z,1520519734.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:34.606Z,1520519734.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:35.005Z,1520519735.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:35.409Z,1520519735.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:35.807Z,1520519735.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:36.214Z,1520519736.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:36.614Z,1520519736.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:37.022Z,1520519737.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:37.411Z,1520519737.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:37.799Z,1520519737.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:38.231Z,1520519738.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:38.611Z,1520519738.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:39.017Z,1520519739.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:39.427Z,1520519739.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:39.862Z,1520519739.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:40.223Z,1520519740.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:40.609Z,1520519740.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:41.015Z,1520519741.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:41.407Z,1520519741.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:41.808Z,1520519741.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:42.213Z,1520519742.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:42.615Z,1520519742.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:43.013Z,1520519743.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:43.413Z,1520519743.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:43.787Z,1520519743.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:44.212Z,1520519744.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:44.614Z,1520519744.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:45.017Z,1520519745.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:45.416Z,1520519745.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:45.822Z,1520519745.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:46.213Z,1520519746.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:46.613Z,1520519746.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:47.015Z,1520519747.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:47.413Z,1520519747.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:47.813Z,1520519747.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:48.220Z,1520519748.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:48.615Z,1520519748.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:49.015Z,1520519749.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:49.417Z,1520519749.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:49.787Z,1520519749.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:50.218Z,1520519750.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:50.624Z,1520519750.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:51.016Z,1520519751.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:51.426Z,1520519751.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:51.819Z,1520519751.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:52.195Z,1520519752.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:52.618Z,1520519752.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:53.001Z,1520519753.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:53.403Z,1520519753.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:53.807Z,1520519753.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:54.241Z,1520519754.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:54.609Z,1520519754.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:55.012Z,1520519755.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:55.408Z,1520519755.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:55.803Z,1520519755.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:56.212Z,1520519756.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:56.611Z,1520519756.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:57.023Z,1520519757.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:57.424Z,1520519757.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:57.811Z,1520519757.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:58.215Z,1520519758.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:58.606Z,1520519758.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:59.011Z,1520519759.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:59.408Z,1520519759.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:35:59.806Z,1520519759.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:00.217Z,1520519760.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:00.613Z,1520519760.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:01.012Z,1520519761.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:01.407Z,1520519761.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:01.810Z,1520519761.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:02.209Z,1520519762.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:02.606Z,1520519762.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:03.026Z,1520519763.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:03.423Z,1520519763.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:03.816Z,1520519763.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:04.216Z,1520519764.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:04.607Z,1520519764.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:05.007Z,1520519765.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:05.431Z,1520519765.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:05.831Z,1520519765.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:06.234Z,1520519766.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:06.627Z,1520519766.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:07.016Z,1520519767.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:07.462Z,1520519767.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:07.807Z,1520519767.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:08.211Z,1520519768.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:08.602Z,1520519768.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:09.033Z,1520519769.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:09.408Z,1520519769.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:09.809Z,1520519769.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:10.206Z,1520519770.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:10.605Z,1520519770.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:11.006Z,1520519771.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:11.400Z,1520519771.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:11.803Z,1520519771.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:12.209Z,1520519772.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:12.607Z,1520519772.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:13.015Z,1520519773.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:13.406Z,1520519773.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:13.801Z,1520519773.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:14.204Z,1520519774.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:14.604Z,1520519774.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:15.007Z,1520519775.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:15.439Z,1520519775.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:15.841Z,1520519775.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:16.199Z,1520519776.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:16.602Z,1520519776.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:20.159Z,1520519780.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:20.294Z,1520519780.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:20.690Z,1520519780.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:21.068Z,1520519781.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:21.464Z,1520519781.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:21.869Z,1520519781.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:22.310Z,1520519782.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:22.662Z,1520519782.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:23.076Z,1520519783.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:23.467Z,1520519783.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:23.870Z,1520519783.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:24.266Z,1520519784.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:24.665Z,1520519784.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:25.065Z,1520519785.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:25.466Z,1520519785.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:25.862Z,1520519785.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:26.267Z,1520519786.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:26.672Z,1520519786.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:27.067Z,1520519787.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:27.459Z,1520519787.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:27.871Z,1520519787.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:28.264Z,1520519788.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:28.659Z,1520519788.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:29.071Z,1520519789.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:29.471Z,1520519789.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:29.870Z,1520519789.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:30.265Z,1520519790.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:30.657Z,1520519790.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:31.066Z,1520519791.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:31.470Z,1520519791.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:31.864Z,1520519791.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:32.267Z,1520519792.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:32.672Z,1520519792.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:33.072Z,1520519793.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:33.476Z,1520519793.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:33.878Z,1520519793.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:34.265Z,1520519794.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:34.681Z,1520519794.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:35.075Z,1520519795.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:35.514Z,1520519795.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:35.872Z,1520519795.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:36.269Z,1520519796.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:36.664Z,1520519796.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:37.068Z,1520519797.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:37.466Z,1520519797.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:37.869Z,1520519797.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:38.276Z,1520519798.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:38.676Z,1520519798.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:39.079Z,1520519799.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:39.447Z,1520519799.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:39.873Z,1520519799.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:40.322Z,1520519800.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:40.669Z,1520519800.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:41.082Z,1520519801.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:41.479Z,1520519801.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:41.882Z,1520519801.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:42.295Z,1520519802.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:42.688Z,1520519802.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:43.079Z,1520519803.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:43.477Z,1520519803.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:43.882Z,1520519803.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:44.282Z,1520519804.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:44.680Z,1520519804.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:45.076Z,1520519805.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:45.475Z,1520519805.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:45.859Z,1520519805.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:46.259Z,1520519806.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:46.682Z,1520519806.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:47.083Z,1520519807.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:47.486Z,1520519807.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:47.861Z,1520519807.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:48.262Z,1520519808.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:48.662Z,1520519808.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:49.057Z,1520519809.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:49.486Z,1520519809.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:49.859Z,1520519809.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:50.289Z,1520519810.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:50.697Z,1520519810.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:51.065Z,1520519811.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:51.460Z,1520519811.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:51.868Z,1520519811.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:52.267Z,1520519812.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:52.671Z,1520519812.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:53.074Z,1520519813.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:53.495Z,1520519813.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:53.872Z,1520519813.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:54.265Z,1520519814.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:54.670Z,1520519814.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:55.075Z,1520519815.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:55.463Z,1520519815.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:55.870Z,1520519815.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:56.285Z,1520519816.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:56.678Z,1520519816.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:57.083Z,1520519817.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:57.451Z,1520519817.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:57.859Z,1520519817.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:58.259Z,1520519818.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:58.650Z,1520519818.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:59.082Z,1520519819.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:59.486Z,1520519819.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:36:59.860Z,1520519819.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:00.262Z,1520519820.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:00.661Z,1520519820.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:01.066Z,1520519821.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:01.495Z,1520519821.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:01.896Z,1520519821.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:02.290Z,1520519822.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:02.691Z,1520519822.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:03.112Z,1520519823.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:03.466Z,1520519823.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:03.859Z,1520519823.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:04.266Z,1520519824.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:04.662Z,1520519824.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:05.068Z,1520519825.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:05.471Z,1520519825.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:05.878Z,1520519825.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:06.270Z,1520519826.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:06.666Z,1520519826.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:07.071Z,1520519827.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:07.466Z,1520519827.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:07.867Z,1520519827.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:08.274Z,1520519828.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:08.672Z,1520519828.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:09.078Z,1520519829.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:09.465Z,1520519829.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:09.862Z,1520519829.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:10.275Z,1520519830.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:10.662Z,1520519830.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:11.071Z,1520519831.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:11.474Z,1520519831.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:11.872Z,1520519831.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:12.260Z,1520519832.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:12.667Z,1520519832.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:13.059Z,1520519833.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:13.466Z,1520519833.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:13.866Z,1520519833.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:14.274Z,1520519834.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:14.672Z,1520519834.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:15.071Z,1520519835.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:15.461Z,1520519835.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:15.861Z,1520519835.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:16.266Z,1520519836.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:16.661Z,1520519836.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:19.810Z,1520519839.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:19.958Z,1520519839.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:20.300Z,1520519840.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:20.682Z,1520519840.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:21.078Z,1520519841.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:21.479Z,1520519841.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:21.874Z,1520519841.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:22.324Z,1520519842.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:22.696Z,1520519842.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:23.096Z,1520519843.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:23.486Z,1520519843.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:23.887Z,1520519843.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:24.291Z,1520519844.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:24.690Z,1520519844.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:25.092Z,1520519845.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:25.501Z,1520519845.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:25.915Z,1520519845.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:26.288Z,1520519846.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:26.703Z,1520519846.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:27.089Z,1520519847.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:27.490Z,1520519847.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:27.898Z,1520519847.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:28.297Z,1520519848.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:28.699Z,1520519848.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:29.102Z,1520519849.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:29.468Z,1520519849.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:29.897Z,1520519849.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:30.275Z,1520519850.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:30.672Z,1520519850.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:31.099Z,1520519851.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:31.501Z,1520519851.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:31.901Z,1520519851.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:32.301Z,1520519852.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:32.677Z,1520519852.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:33.074Z,1520519853.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:33.482Z,1520519853.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:33.877Z,1520519853.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:34.309Z,1520519854.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:34.769Z,1520519854.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:35.131Z,1520519855.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:35.505Z,1520519855.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:35.884Z,1520519855.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:36.283Z,1520519856.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:36.679Z,1520519856.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:37.085Z,1520519857.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:37.494Z,1520519857.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:37.907Z,1520519857.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:38.291Z,1520519858.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:38.738Z,1520519858.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:39.086Z,1520519859.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:39.489Z,1520519859.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:39.882Z,1520519859.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:40.303Z,1520519860.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:40.715Z,1520519860.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:41.091Z,1520519861.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:41.502Z,1520519861.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:41.902Z,1520519861.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:42.291Z,1520519862.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:42.689Z,1520519862.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:43.092Z,1520519863.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:43.548Z,1520519863.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:43.888Z,1520519863.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:44.303Z,1520519864.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:44.694Z,1520519864.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:45.099Z,1520519865.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:45.501Z,1520519865.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:45.872Z,1520519865.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:46.299Z,1520519866.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:46.697Z,1520519866.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:47.103Z,1520519867.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:47.495Z,1520519867.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:47.898Z,1520519867.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:48.305Z,1520519868.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:48.679Z,1520519868.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:49.099Z,1520519869.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:49.518Z,1520519869.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:49.898Z,1520519869.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:50.282Z,1520519870.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:50.681Z,1520519870.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:51.126Z,1520519871.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:51.486Z,1520519871.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:51.911Z,1520519871.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:52.309Z,1520519872.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:52.696Z,1520519872.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:53.086Z,1520519873.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:53.486Z,1520519873.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:53.881Z,1520519873.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:54.294Z,1520519874.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:54.689Z,1520519874.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:55.114Z,1520519875.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:55.508Z,1520519875.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:55.875Z,1520519875.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:56.286Z,1520519876.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:56.682Z,1520519876.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:57.081Z,1520519877.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:57.510Z,1520519877.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:57.912Z,1520519877.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:58.282Z,1520519878.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:58.682Z,1520519878.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:59.083Z,1520519879.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:59.483Z,1520519879.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:59.883Z,1520519879.883 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:59.883Z,1520519879.883 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 138
2018-03-08T14:37:59.883Z,1520519879.883 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T14:37:59.885Z,1520519879.885 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:59.885Z,1520519879.885 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 138
2018-03-08T14:37:59.885Z,1520519879.885 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T14:37:59.887Z,1520519879.887 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:37:59.887Z,1520519879.887 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 138
2018-03-08T14:37:59.887Z,1520519879.887 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T14:37:59.919Z,1520519879.919 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T14:37:59.919Z,1520519879.919 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T14:37:59.919Z,1520519879.919 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T14:38:00.297Z,1520519880.297 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T14:38:00.297Z,1520519880.297 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 138
2018-03-08T14:38:00.298Z,1520519880.298 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T14:38:00.298Z,1520519880.298 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 138
2018-03-08T14:38:00.298Z,1520519880.298 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T14:38:00.298Z,1520519880.298 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 138
2018-03-08T14:38:00.690Z,1520519880.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T14:38:00.691Z,1520519880.691 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:38:00.691Z,1520519880.691 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:38:00.692Z,1520519880.692 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T14:38:00.692Z,1520519880.692 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:38:00.692Z,1520519880.692 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:38:00.693Z,1520519880.693 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T14:38:00.693Z,1520519880.693 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:38:00.693Z,1520519880.693 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:38:01.091Z,1520519881.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T14:38:01.092Z,1520519881.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:01.485Z,1520519881.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T14:38:01.486Z,1520519881.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:01.879Z,1520519881.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T14:38:01.880Z,1520519881.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:02.285Z,1520519882.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T14:38:02.286Z,1520519882.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:02.686Z,1520519882.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T14:38:02.687Z,1520519882.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:03.095Z,1520519883.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T14:38:03.096Z,1520519883.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:03.507Z,1520519883.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T14:38:03.508Z,1520519883.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:03.896Z,1520519883.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T14:38:03.897Z,1520519883.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:04.285Z,1520519884.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T14:38:04.286Z,1520519884.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:04.694Z,1520519884.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T14:38:04.695Z,1520519884.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:05.127Z,1520519885.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T14:38:05.128Z,1520519885.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:05.484Z,1520519885.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T14:38:05.485Z,1520519885.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:05.890Z,1520519885.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T14:38:05.891Z,1520519885.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:06.297Z,1520519886.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T14:38:06.298Z,1520519886.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:06.708Z,1520519886.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T14:38:06.713Z,1520519886.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:07.103Z,1520519887.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T14:38:07.109Z,1520519887.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:07.496Z,1520519887.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T14:38:07.497Z,1520519887.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:07.883Z,1520519887.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T14:38:07.884Z,1520519887.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:08.282Z,1520519888.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T14:38:08.286Z,1520519888.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:08.709Z,1520519888.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T14:38:08.710Z,1520519888.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:09.090Z,1520519889.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T14:38:09.091Z,1520519889.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:09.496Z,1520519889.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T14:38:09.517Z,1520519889.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:09.884Z,1520519889.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T14:38:09.885Z,1520519889.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:10.283Z,1520519890.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T14:38:10.284Z,1520519890.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:10.683Z,1520519890.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T14:38:10.684Z,1520519890.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:11.082Z,1520519891.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T14:38:11.083Z,1520519891.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:11.481Z,1520519891.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T14:38:11.482Z,1520519891.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:11.894Z,1520519891.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T14:38:11.895Z,1520519891.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:12.284Z,1520519892.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T14:38:12.285Z,1520519892.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:12.685Z,1520519892.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T14:38:12.686Z,1520519892.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:13.088Z,1520519893.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T14:38:13.089Z,1520519893.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:13.497Z,1520519893.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T14:38:13.497Z,1520519893.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:13.866Z,1520519893.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T14:38:13.867Z,1520519893.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:14.285Z,1520519894.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T14:38:14.286Z,1520519894.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:14.673Z,1520519894.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T14:38:14.674Z,1520519894.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:15.088Z,1520519895.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T14:38:15.089Z,1520519895.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:15.498Z,1520519895.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T14:38:15.499Z,1520519895.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:15.900Z,1520519895.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T14:38:15.911Z,1520519895.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:16.286Z,1520519896.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T14:38:16.287Z,1520519896.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:16.290Z,1520519896.290 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T14:33:16.1Z
2018-03-08T14:38:16.290Z,1520519896.290 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T14:38:16.290Z,1520519896.290 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T14:38:16.686Z,1520519896.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T14:38:16.687Z,1520519896.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:19.878Z,1520519899.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T14:38:19.879Z,1520519899.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:20.031Z,1520519900.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:20.309Z,1520519900.309 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0160.lzma
2018-03-08T14:38:20.375Z,1520519900.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:20.803Z,1520519900.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:21.108Z,1520519901.108 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0160.lzma.bak
2018-03-08T14:38:21.108Z,1520519901.108 [DataOverHttps](INFO): SBD MOMSN=7986518
2018-03-08T14:38:21.183Z,1520519901.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:21.748Z,1520519901.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:21.971Z,1520519901.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:25.959Z,1520519905.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:26.099Z,1520519906.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:26.471Z,1520519906.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:26.859Z,1520519906.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:27.271Z,1520519907.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:27.651Z,1520519907.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:28.031Z,1520519908.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:31.965Z,1520519911.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:32.113Z,1520519912.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:32.393Z,1520519912.393 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0161.lzma
2018-03-08T14:38:32.467Z,1520519912.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:32.867Z,1520519912.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:33.191Z,1520519913.191 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0161.lzma.bak
2018-03-08T14:38:33.191Z,1520519913.191 [DataOverHttps](INFO): SBD MOMSN=7986520
2018-03-08T14:38:33.249Z,1520519913.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:33.953Z,1520519913.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:33.956Z,1520519913.956 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T14:38:33.956Z,1520519913.956 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T14:38:33.956Z,1520519913.956 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T14:38:34.111Z,1520519914.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:34.522Z,1520519914.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:37.712Z,1520519917.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:37.833Z,1520519917.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:38.231Z,1520519918.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:38.596Z,1520519918.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:38.990Z,1520519918.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:39.385Z,1520519919.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:39.798Z,1520519919.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:40.194Z,1520519920.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:40.593Z,1520519920.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:40.993Z,1520519920.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:41.394Z,1520519921.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:41.787Z,1520519921.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:42.191Z,1520519922.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:42.595Z,1520519922.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:42.992Z,1520519922.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:43.392Z,1520519923.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:43.793Z,1520519923.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:44.194Z,1520519924.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:44.590Z,1520519924.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:44.994Z,1520519924.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:45.394Z,1520519925.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:45.868Z,1520519925.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:46.193Z,1520519926.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:46.596Z,1520519926.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:47.014Z,1520519927.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:47.394Z,1520519927.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:47.844Z,1520519927.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:48.190Z,1520519928.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:48.590Z,1520519928.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:49.004Z,1520519929.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:49.396Z,1520519929.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:49.803Z,1520519929.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:50.188Z,1520519930.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:50.599Z,1520519930.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:50.988Z,1520519930.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:51.400Z,1520519931.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:51.790Z,1520519931.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:52.202Z,1520519932.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:52.596Z,1520519932.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:53.002Z,1520519933.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:53.388Z,1520519933.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:53.794Z,1520519933.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:54.191Z,1520519934.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:54.590Z,1520519934.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:54.995Z,1520519934.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:55.395Z,1520519935.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:55.802Z,1520519935.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:56.188Z,1520519936.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:56.587Z,1520519936.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:56.987Z,1520519936.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:57.398Z,1520519937.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:57.790Z,1520519937.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:58.196Z,1520519938.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:58.595Z,1520519938.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:58.995Z,1520519938.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:59.394Z,1520519939.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:38:59.798Z,1520519939.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:00.191Z,1520519940.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:00.589Z,1520519940.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:00.000Z,1520519941.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:01.402Z,1520519941.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:01.800Z,1520519941.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:02.198Z,1520519942.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:02.590Z,1520519942.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:02.989Z,1520519942.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:03.390Z,1520519943.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:03.825Z,1520519943.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:04.243Z,1520519944.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:04.606Z,1520519944.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:05.006Z,1520519945.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:05.389Z,1520519945.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:05.790Z,1520519945.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:06.191Z,1520519946.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:06.589Z,1520519946.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:07.004Z,1520519947.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:07.405Z,1520519947.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:07.805Z,1520519947.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:08.191Z,1520519948.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:08.598Z,1520519948.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:08.992Z,1520519948.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:09.391Z,1520519949.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:09.792Z,1520519949.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:10.210Z,1520519950.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:10.600Z,1520519950.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:11.011Z,1520519951.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:11.480Z,1520519951.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:11.794Z,1520519951.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:12.192Z,1520519952.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:12.601Z,1520519952.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:12.000Z,1520519953.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:13.403Z,1520519953.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:13.801Z,1520519953.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:14.194Z,1520519954.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:14.603Z,1520519954.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:14.987Z,1520519954.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:15.391Z,1520519955.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:15.790Z,1520519955.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:16.201Z,1520519956.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:16.603Z,1520519956.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:17.004Z,1520519957.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:17.391Z,1520519957.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:17.790Z,1520519957.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:18.191Z,1520519958.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:18.595Z,1520519958.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:19.007Z,1520519959.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:19.406Z,1520519959.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:19.802Z,1520519959.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:20.199Z,1520519960.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:20.591Z,1520519960.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:20.997Z,1520519960.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:21.406Z,1520519961.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:21.844Z,1520519961.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:22.245Z,1520519962.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:22.624Z,1520519962.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:23.053Z,1520519963.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:23.407Z,1520519963.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:23.816Z,1520519963.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:24.238Z,1520519964.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:24.589Z,1520519964.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:25.026Z,1520519965.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:25.416Z,1520519965.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:25.791Z,1520519965.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:26.197Z,1520519966.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:26.632Z,1520519966.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:26.995Z,1520519966.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:27.392Z,1520519967.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:27.789Z,1520519967.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:28.215Z,1520519968.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:28.600Z,1520519968.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:29.009Z,1520519969.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:29.394Z,1520519969.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:29.795Z,1520519969.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:30.194Z,1520519970.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:30.579Z,1520519970.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:31.006Z,1520519971.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:31.404Z,1520519971.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:31.801Z,1520519971.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:32.199Z,1520519972.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:32.595Z,1520519972.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:32.998Z,1520519972.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:33.391Z,1520519973.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:33.795Z,1520519973.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:34.201Z,1520519974.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:34.615Z,1520519974.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:37.898Z,1520519977.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:38.040Z,1520519978.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:38.413Z,1520519978.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:38.814Z,1520519978.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:39.198Z,1520519979.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:39.611Z,1520519979.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:40.062Z,1520519980.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:40.414Z,1520519980.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:40.815Z,1520519980.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:41.201Z,1520519981.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:41.599Z,1520519981.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:42.002Z,1520519982.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:42.410Z,1520519982.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:42.799Z,1520519982.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:43.211Z,1520519983.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:43.611Z,1520519983.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:44.007Z,1520519984.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:44.410Z,1520519984.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:44.806Z,1520519984.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:45.206Z,1520519985.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:45.602Z,1520519985.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:46.018Z,1520519986.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:46.407Z,1520519986.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:46.814Z,1520519986.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:47.206Z,1520519987.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:47.606Z,1520519987.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:48.001Z,1520519988.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:48.404Z,1520519988.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:48.799Z,1520519988.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:49.222Z,1520519989.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:49.615Z,1520519989.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:50.009Z,1520519990.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:50.404Z,1520519990.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:50.802Z,1520519990.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:51.206Z,1520519991.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:51.603Z,1520519991.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:52.013Z,1520519992.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:52.412Z,1520519992.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:52.815Z,1520519992.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:53.218Z,1520519993.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:53.603Z,1520519993.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:54.009Z,1520519994.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:54.410Z,1520519994.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:54.799Z,1520519994.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:55.219Z,1520519995.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:55.622Z,1520519995.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:56.017Z,1520519996.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:56.422Z,1520519996.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:56.816Z,1520519996.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:57.223Z,1520519997.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:57.622Z,1520519997.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:58.026Z,1520519998.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:58.400Z,1520519998.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:58.825Z,1520519998.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:59.198Z,1520519999.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:39:59.596Z,1520519999.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:00.007Z,1520520000.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:00.402Z,1520520000.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:00.798Z,1520520000.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:01.208Z,1520520001.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:01.614Z,1520520001.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:02.015Z,1520520002.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:02.403Z,1520520002.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:02.806Z,1520520002.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:03.208Z,1520520003.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:03.606Z,1520520003.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:03.958Z,1520520003.958 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T14:40:03.958Z,1520520003.958 [NAL9602] Data Fault, FailCount= 4
2018-03-08T14:40:03.958Z,1520520003.958 [NAL9602](ERROR): Data Fault
2018-03-08T14:40:04.020Z,1520520004.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:04.054Z,1520520004.054 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T14:40:04.362Z,1520520004.362 [NAL9602](INFO): Powering down
2018-03-08T14:40:04.439Z,1520520004.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:04.811Z,1520520004.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:05.215Z,1520520005.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:05.256Z,1520520005.256 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T14:40:05.256Z,1520520005.256 [NAL9602] No Fault, FailCount= 4
2018-03-08T14:40:05.609Z,1520520005.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:05.993Z,1520520005.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:06.422Z,1520520006.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:06.790Z,1520520006.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:07.200Z,1520520007.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:07.597Z,1520520007.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:07.998Z,1520520007.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:08.400Z,1520520008.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:08.800Z,1520520008.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:09.201Z,1520520009.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:09.601Z,1520520009.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:09.994Z,1520520009.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:10.394Z,1520520010.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:10.797Z,1520520010.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:11.201Z,1520520011.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:11.593Z,1520520011.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:12.000Z,1520520012.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:12.478Z,1520520012.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:12.794Z,1520520012.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:13.199Z,1520520013.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:13.606Z,1520520013.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:14.002Z,1520520014.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:14.406Z,1520520014.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:14.798Z,1520520014.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:15.198Z,1520520015.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:15.602Z,1520520015.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:16.002Z,1520520016.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:16.398Z,1520520016.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:16.806Z,1520520016.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:17.229Z,1520520017.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:17.594Z,1520520017.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:18.001Z,1520520018.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:18.397Z,1520520018.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:18.831Z,1520520018.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:19.234Z,1520520019.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:19.599Z,1520520019.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:19.999Z,1520520019.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:20.401Z,1520520020.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:20.801Z,1520520020.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:21.202Z,1520520021.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:21.606Z,1520520021.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:22.002Z,1520520022.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:22.437Z,1520520022.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:22.799Z,1520520022.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:23.204Z,1520520023.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:23.601Z,1520520023.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:24.045Z,1520520024.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:24.418Z,1520520024.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:24.803Z,1520520024.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:25.203Z,1520520025.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:25.610Z,1520520025.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:26.005Z,1520520026.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:26.406Z,1520520026.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:26.806Z,1520520026.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:27.204Z,1520520027.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:27.606Z,1520520027.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:28.010Z,1520520028.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:28.406Z,1520520028.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:28.806Z,1520520028.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:29.209Z,1520520029.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:29.609Z,1520520029.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:30.006Z,1520520030.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:30.408Z,1520520030.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:30.803Z,1520520030.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:31.203Z,1520520031.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:31.605Z,1520520031.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:32.005Z,1520520032.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:32.418Z,1520520032.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:32.830Z,1520520032.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:33.225Z,1520520033.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:33.596Z,1520520033.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:33.995Z,1520520033.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:34.370Z,1520520034.370 [NAL9602](INFO): Powering up NAL9602
2018-03-08T14:40:34.437Z,1520520034.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:34.820Z,1520520034.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:38.935Z,1520520038.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:39.043Z,1520520039.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:39.438Z,1520520039.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:39.830Z,1520520039.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:40.238Z,1520520040.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:40.639Z,1520520040.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:41.079Z,1520520041.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:41.432Z,1520520041.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:41.838Z,1520520041.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:42.252Z,1520520042.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:42.635Z,1520520042.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:43.065Z,1520520043.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:43.431Z,1520520043.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:43.834Z,1520520043.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:44.233Z,1520520044.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:44.629Z,1520520044.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:45.065Z,1520520045.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:45.398Z,1520520045.398 [NAL9602](INFO): NAL9602 initialized
2018-03-08T14:40:45.441Z,1520520045.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:45.834Z,1520520045.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:46.241Z,1520520046.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:46.652Z,1520520046.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:47.072Z,1520520047.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:47.440Z,1520520047.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:47.846Z,1520520047.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:48.242Z,1520520048.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:48.649Z,1520520048.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:49.046Z,1520520049.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:49.495Z,1520520049.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:49.859Z,1520520049.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:50.251Z,1520520050.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:50.633Z,1520520050.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:51.028Z,1520520051.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:51.454Z,1520520051.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:51.830Z,1520520051.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:52.254Z,1520520052.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:52.666Z,1520520052.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:53.065Z,1520520053.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:53.434Z,1520520053.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:53.864Z,1520520053.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:54.234Z,1520520054.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:54.631Z,1520520054.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:55.034Z,1520520055.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:55.457Z,1520520055.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:55.857Z,1520520055.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:56.255Z,1520520056.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:56.633Z,1520520056.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:57.058Z,1520520057.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:57.435Z,1520520057.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:57.833Z,1520520057.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:58.244Z,1520520058.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:58.648Z,1520520058.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:59.046Z,1520520059.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:59.437Z,1520520059.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:40:59.884Z,1520520059.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:00.234Z,1520520060.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:00.672Z,1520520060.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:01.035Z,1520520061.035 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:01.035Z,1520520061.035 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 139
2018-03-08T14:41:01.036Z,1520520061.036 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T14:41:01.042Z,1520520061.042 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:01.042Z,1520520061.042 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 139
2018-03-08T14:41:01.042Z,1520520061.042 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T14:41:01.044Z,1520520061.044 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:01.044Z,1520520061.044 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 139
2018-03-08T14:41:01.044Z,1520520061.044 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T14:41:01.084Z,1520520061.084 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T14:41:01.097Z,1520520061.097 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T14:41:01.097Z,1520520061.097 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T14:41:01.455Z,1520520061.455 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T14:41:01.455Z,1520520061.455 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 139
2018-03-08T14:41:01.455Z,1520520061.455 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T14:41:01.455Z,1520520061.455 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 139
2018-03-08T14:41:01.456Z,1520520061.456 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T14:41:01.456Z,1520520061.456 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 139
2018-03-08T14:41:01.857Z,1520520061.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T14:41:01.858Z,1520520061.858 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:41:01.858Z,1520520061.858 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:41:01.859Z,1520520061.859 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T14:41:01.859Z,1520520061.859 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:41:01.859Z,1520520061.859 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:41:01.860Z,1520520061.860 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T14:41:01.860Z,1520520061.860 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:41:01.860Z,1520520061.860 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:41:02.252Z,1520520062.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T14:41:02.253Z,1520520062.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:02.643Z,1520520062.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T14:41:02.644Z,1520520062.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:03.058Z,1520520063.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T14:41:03.059Z,1520520063.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:03.442Z,1520520063.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T14:41:03.443Z,1520520063.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:03.881Z,1520520063.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T14:41:03.881Z,1520520063.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:04.239Z,1520520064.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T14:41:04.240Z,1520520064.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:04.667Z,1520520064.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T14:41:04.668Z,1520520064.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:05.046Z,1520520065.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T14:41:05.047Z,1520520065.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:05.428Z,1520520065.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T14:41:05.429Z,1520520065.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:05.842Z,1520520065.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T14:41:05.843Z,1520520065.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:06.240Z,1520520066.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T14:41:06.241Z,1520520066.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:06.638Z,1520520066.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T14:41:06.639Z,1520520066.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:07.035Z,1520520067.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T14:41:07.036Z,1520520067.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:07.441Z,1520520067.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T14:41:07.442Z,1520520067.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:07.843Z,1520520067.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T14:41:07.844Z,1520520067.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:08.247Z,1520520068.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T14:41:08.248Z,1520520068.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:08.637Z,1520520068.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T14:41:08.638Z,1520520068.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:09.058Z,1520520069.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T14:41:09.059Z,1520520069.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:09.438Z,1520520069.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T14:41:09.439Z,1520520069.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:09.838Z,1520520069.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T14:41:09.839Z,1520520069.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:10.254Z,1520520070.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T14:41:10.255Z,1520520070.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:10.648Z,1520520070.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T14:41:10.649Z,1520520070.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:11.149Z,1520520071.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T14:41:11.150Z,1520520071.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:11.419Z,1520520071.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T14:41:11.420Z,1520520071.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:11.845Z,1520520071.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T14:41:11.846Z,1520520071.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:12.251Z,1520520072.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T14:41:12.252Z,1520520072.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:12.645Z,1520520072.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T14:41:12.646Z,1520520072.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:13.091Z,1520520073.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T14:41:13.092Z,1520520073.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:13.467Z,1520520073.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T14:41:13.468Z,1520520073.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:13.850Z,1520520073.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T14:41:13.851Z,1520520073.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:14.255Z,1520520074.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T14:41:14.256Z,1520520074.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:14.625Z,1520520074.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T14:41:14.626Z,1520520074.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:15.033Z,1520520075.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T14:41:15.034Z,1520520075.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:15.426Z,1520520075.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T14:41:15.427Z,1520520075.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:15.833Z,1520520075.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T14:41:15.833Z,1520520075.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:16.240Z,1520520076.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T14:41:16.257Z,1520520076.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:16.710Z,1520520076.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T14:41:16.711Z,1520520076.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:17.064Z,1520520077.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T14:41:17.065Z,1520520077.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:17.434Z,1520520077.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T14:41:17.435Z,1520520077.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:17.830Z,1520520077.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T14:41:17.831Z,1520520077.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:18.233Z,1520520078.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T14:41:18.234Z,1520520078.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:18.635Z,1520520078.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T14:41:18.636Z,1520520078.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:19.034Z,1520520079.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T14:41:19.035Z,1520520079.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:19.463Z,1520520079.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T14:41:19.464Z,1520520079.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:19.833Z,1520520079.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T14:41:19.834Z,1520520079.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:20.248Z,1520520080.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T14:41:20.265Z,1520520080.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:20.637Z,1520520080.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T14:41:20.638Z,1520520080.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:21.037Z,1520520081.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:21.439Z,1520520081.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:21.838Z,1520520081.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:22.243Z,1520520082.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:22.644Z,1520520082.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:23.039Z,1520520083.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:23.443Z,1520520083.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:23.839Z,1520520083.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:24.242Z,1520520084.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:24.639Z,1520520084.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:25.071Z,1520520085.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:25.454Z,1520520085.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:25.863Z,1520520085.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:26.258Z,1520520086.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:26.630Z,1520520086.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:27.055Z,1520520087.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:27.434Z,1520520087.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:27.833Z,1520520087.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:28.260Z,1520520088.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:28.667Z,1520520088.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:29.060Z,1520520089.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:29.466Z,1520520089.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:29.830Z,1520520089.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:30.236Z,1520520090.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:30.631Z,1520520090.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:31.034Z,1520520091.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:31.457Z,1520520091.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:31.832Z,1520520091.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:32.258Z,1520520092.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:32.634Z,1520520092.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:33.038Z,1520520093.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:33.431Z,1520520093.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:33.834Z,1520520093.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:34.260Z,1520520094.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:34.675Z,1520520094.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:35.070Z,1520520095.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:38.390Z,1520520098.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:38.531Z,1520520098.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:38.892Z,1520520098.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:39.276Z,1520520099.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:39.679Z,1520520099.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:40.073Z,1520520100.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:40.473Z,1520520100.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:40.876Z,1520520100.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:41.275Z,1520520101.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:41.677Z,1520520101.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:42.078Z,1520520102.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:42.472Z,1520520102.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:42.877Z,1520520102.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:43.273Z,1520520103.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:43.670Z,1520520103.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:44.081Z,1520520104.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:44.474Z,1520520104.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:44.895Z,1520520104.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:45.278Z,1520520105.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:45.680Z,1520520105.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:46.067Z,1520520106.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:46.485Z,1520520106.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:46.859Z,1520520106.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:47.322Z,1520520107.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:47.706Z,1520520107.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:48.071Z,1520520108.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:48.465Z,1520520108.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:48.863Z,1520520108.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:49.265Z,1520520109.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:49.665Z,1520520109.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:50.062Z,1520520110.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:50.074Z,1520520110.074 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T14:41:50.467Z,1520520110.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:50.869Z,1520520110.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:51.274Z,1520520111.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:51.669Z,1520520111.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:52.055Z,1520520112.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:52.527Z,1520520112.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:52.554Z,1520520112.554 [CBIT](INFO): Clearing failed state for component DropWeight
2018-03-08T14:41:52.554Z,1520520112.554 [DropWeight] No Fault, FailCount= 1
2018-03-08T14:41:52.862Z,1520520112.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:53.290Z,1520520113.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:53.671Z,1520520113.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:54.076Z,1520520114.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:54.466Z,1520520114.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:54.865Z,1520520114.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:55.265Z,1520520115.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:55.663Z,1520520115.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:56.065Z,1520520116.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:56.469Z,1520520116.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:56.868Z,1520520116.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:57.274Z,1520520117.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:57.659Z,1520520117.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:58.115Z,1520520118.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:58.471Z,1520520118.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:58.874Z,1520520118.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:59.272Z,1520520119.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:41:59.676Z,1520520119.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:00.076Z,1520520120.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:00.464Z,1520520120.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:00.872Z,1520520120.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:01.268Z,1520520121.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:01.671Z,1520520121.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:02.072Z,1520520122.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:02.480Z,1520520122.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:02.876Z,1520520122.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:03.286Z,1520520123.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:03.675Z,1520520123.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:04.069Z,1520520124.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:04.473Z,1520520124.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:04.863Z,1520520124.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:05.283Z,1520520125.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:05.682Z,1520520125.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:06.087Z,1520520126.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:06.485Z,1520520126.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:06.859Z,1520520126.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:07.287Z,1520520127.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:07.683Z,1520520127.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:08.089Z,1520520128.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:08.484Z,1520520128.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:08.898Z,1520520128.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:09.283Z,1520520129.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:09.675Z,1520520129.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:10.094Z,1520520130.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:10.465Z,1520520130.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:10.859Z,1520520130.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:11.309Z,1520520131.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:11.669Z,1520520131.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:12.101Z,1520520132.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:12.475Z,1520520132.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:12.864Z,1520520132.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:13.270Z,1520520133.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:13.667Z,1520520133.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:14.067Z,1520520134.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:14.482Z,1520520134.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:14.886Z,1520520134.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:15.276Z,1520520135.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:15.669Z,1520520135.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:16.069Z,1520520136.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:16.470Z,1520520136.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:16.865Z,1520520136.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:17.275Z,1520520137.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:17.678Z,1520520137.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:18.076Z,1520520138.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:18.463Z,1520520138.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:18.874Z,1520520138.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:19.274Z,1520520139.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:19.668Z,1520520139.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:20.067Z,1520520140.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:20.470Z,1520520140.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:20.878Z,1520520140.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:21.284Z,1520520141.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:21.663Z,1520520141.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:22.067Z,1520520142.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:22.474Z,1520520142.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:22.867Z,1520520142.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:23.276Z,1520520143.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:23.685Z,1520520143.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:24.076Z,1520520144.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:24.476Z,1520520144.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:24.875Z,1520520144.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:25.273Z,1520520145.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:25.670Z,1520520145.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:26.079Z,1520520146.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:26.475Z,1520520146.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:26.890Z,1520520146.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:27.278Z,1520520147.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:27.649Z,1520520147.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:28.077Z,1520520148.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:28.482Z,1520520148.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:28.849Z,1520520148.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:29.283Z,1520520149.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:29.687Z,1520520149.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:30.082Z,1520520150.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:30.483Z,1520520150.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:30.862Z,1520520150.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:31.256Z,1520520151.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:31.671Z,1520520151.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:32.073Z,1520520152.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:32.472Z,1520520152.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:32.879Z,1520520152.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:33.286Z,1520520153.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:33.669Z,1520520153.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:34.063Z,1520520154.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:34.467Z,1520520154.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:34.863Z,1520520154.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:35.274Z,1520520155.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:38.413Z,1520520158.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:38.537Z,1520520158.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:38.914Z,1520520158.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:39.282Z,1520520159.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:39.685Z,1520520159.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:40.084Z,1520520160.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:40.488Z,1520520160.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:40.885Z,1520520160.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:41.294Z,1520520161.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:41.720Z,1520520161.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:42.099Z,1520520162.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:42.488Z,1520520162.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:42.894Z,1520520162.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:43.289Z,1520520163.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:43.695Z,1520520163.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:44.096Z,1520520164.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:44.486Z,1520520164.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:44.888Z,1520520164.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:45.291Z,1520520165.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:45.690Z,1520520165.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:46.085Z,1520520166.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:46.495Z,1520520166.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:46.893Z,1520520166.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:47.296Z,1520520167.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:47.687Z,1520520167.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:48.086Z,1520520168.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:48.485Z,1520520168.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:48.886Z,1520520168.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:49.296Z,1520520169.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:49.701Z,1520520169.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:50.102Z,1520520170.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:50.487Z,1520520170.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:50.887Z,1520520170.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:51.290Z,1520520171.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:51.680Z,1520520171.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:52.084Z,1520520172.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:52.498Z,1520520172.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:52.897Z,1520520172.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:53.302Z,1520520173.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:53.750Z,1520520173.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:54.094Z,1520520174.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:54.508Z,1520520174.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:54.895Z,1520520174.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:55.297Z,1520520175.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:55.696Z,1520520175.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:56.103Z,1520520176.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:56.494Z,1520520176.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:56.893Z,1520520176.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:57.294Z,1520520177.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:57.695Z,1520520177.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:58.093Z,1520520178.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:58.496Z,1520520178.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:58.894Z,1520520178.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:59.302Z,1520520179.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:42:59.689Z,1520520179.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:00.090Z,1520520180.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:00.493Z,1520520180.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:00.899Z,1520520180.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:01.299Z,1520520181.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:01.702Z,1520520181.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:02.114Z,1520520182.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:02.503Z,1520520182.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:02.898Z,1520520182.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:03.278Z,1520520183.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:03.671Z,1520520183.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:04.104Z,1520520184.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:04.503Z,1520520184.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:04.902Z,1520520184.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:05.300Z,1520520185.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:05.706Z,1520520185.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:06.099Z,1520520186.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:06.507Z,1520520186.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:06.890Z,1520520186.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:07.315Z,1520520187.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:07.692Z,1520520187.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:08.099Z,1520520188.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:08.547Z,1520520188.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:08.907Z,1520520188.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:09.297Z,1520520189.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:09.705Z,1520520189.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:10.108Z,1520520190.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:10.532Z,1520520190.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:10.910Z,1520520190.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:11.319Z,1520520191.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:11.684Z,1520520191.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:12.076Z,1520520192.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:12.484Z,1520520192.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:12.961Z,1520520192.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:13.315Z,1520520193.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:13.689Z,1520520193.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:14.094Z,1520520194.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:14.485Z,1520520194.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:14.881Z,1520520194.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:15.299Z,1520520195.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:15.695Z,1520520195.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:16.090Z,1520520196.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:16.496Z,1520520196.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:16.899Z,1520520196.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:17.302Z,1520520197.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:17.690Z,1520520197.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:18.074Z,1520520198.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:18.483Z,1520520198.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:18.882Z,1520520198.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:19.299Z,1520520199.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:19.725Z,1520520199.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:20.107Z,1520520200.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:20.503Z,1520520200.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:20.880Z,1520520200.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:21.279Z,1520520201.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:21.683Z,1520520201.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:22.082Z,1520520202.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:22.488Z,1520520202.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:22.888Z,1520520202.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:23.319Z,1520520203.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:23.748Z,1520520203.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:24.089Z,1520520204.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:24.487Z,1520520204.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:24.931Z,1520520204.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:25.288Z,1520520205.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:25.688Z,1520520205.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:26.098Z,1520520206.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:26.491Z,1520520206.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:26.882Z,1520520206.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:27.286Z,1520520207.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:27.687Z,1520520207.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:28.085Z,1520520208.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:28.492Z,1520520208.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:28.896Z,1520520208.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:29.298Z,1520520209.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:29.683Z,1520520209.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:30.104Z,1520520210.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:30.487Z,1520520210.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:30.946Z,1520520210.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:31.305Z,1520520211.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:31.714Z,1520520211.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:32.097Z,1520520212.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:32.493Z,1520520212.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:32.899Z,1520520212.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:33.294Z,1520520213.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:33.703Z,1520520213.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:34.093Z,1520520214.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:34.503Z,1520520214.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:34.506Z,1520520214.506 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T14:43:34.506Z,1520520214.506 [Default:CheckIn:C.Wait] Stopped
2018-03-08T14:43:34.506Z,1520520214.506 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T14:43:34.506Z,1520520214.506 [Default:CheckIn:D] Running Loop=1
2018-03-08T14:43:34.900Z,1520520214.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:34.904Z,1520520214.904 [Default:CheckIn:D] Stopped
2018-03-08T14:43:34.904Z,1520520214.904 [Default:CheckIn:E] Running Loop=1
2018-03-08T14:43:35.301Z,1520520215.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:35.305Z,1520520215.305 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 417.834961 min 
2018-03-08T14:43:35.305Z,1520520215.305 [Default:CheckIn:E] Stopped
2018-03-08T14:43:35.305Z,1520520215.305 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T14:43:35.305Z,1520520215.305 [Default:CheckIn] Stopped
2018-03-08T14:43:35.305Z,1520520215.305 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T14:43:35.305Z,1520520215.305 [Default:CheckIn](INFO): Running loop #41
2018-03-08T14:43:35.305Z,1520520215.305 [Default:CheckIn] Running Loop=41
2018-03-08T14:43:35.306Z,1520520215.306 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T14:43:35.306Z,1520520215.306 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T14:43:38.407Z,1520520218.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:38.543Z,1520520218.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:38.896Z,1520520218.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:39.301Z,1520520219.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:39.697Z,1520520219.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:40.075Z,1520520220.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:40.479Z,1520520220.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:40.879Z,1520520220.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:41.321Z,1520520221.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:41.703Z,1520520221.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:42.108Z,1520520222.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:42.503Z,1520520222.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:42.876Z,1520520222.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:43.322Z,1520520223.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:43.679Z,1520520223.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:44.078Z,1520520224.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:44.506Z,1520520224.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:44.906Z,1520520224.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:45.313Z,1520520225.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:45.679Z,1520520225.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:46.079Z,1520520226.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:46.479Z,1520520226.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:46.879Z,1520520226.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:47.308Z,1520520227.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:47.692Z,1520520227.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:48.092Z,1520520228.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:48.479Z,1520520228.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:48.874Z,1520520228.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:49.282Z,1520520229.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:49.689Z,1520520229.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:50.091Z,1520520230.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:50.495Z,1520520230.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:50.893Z,1520520230.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:51.301Z,1520520231.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:51.690Z,1520520231.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:52.089Z,1520520232.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:52.490Z,1520520232.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:52.895Z,1520520232.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:53.303Z,1520520233.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:53.745Z,1520520233.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:54.103Z,1520520234.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:54.475Z,1520520234.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:54.873Z,1520520234.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:55.271Z,1520520235.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:55.683Z,1520520235.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:56.086Z,1520520236.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:56.485Z,1520520236.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:56.922Z,1520520236.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:57.304Z,1520520237.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:57.674Z,1520520237.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:58.079Z,1520520238.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:58.479Z,1520520238.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:58.875Z,1520520238.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:59.309Z,1520520239.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:43:59.689Z,1520520239.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:00.113Z,1520520240.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:00.483Z,1520520240.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:00.878Z,1520520240.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:01.275Z,1520520241.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:01.681Z,1520520241.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:02.078Z,1520520242.078 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:02.079Z,1520520242.079 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 140
2018-03-08T14:44:02.079Z,1520520242.079 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T14:44:02.080Z,1520520242.080 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:02.080Z,1520520242.080 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 140
2018-03-08T14:44:02.081Z,1520520242.081 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T14:44:02.082Z,1520520242.082 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:02.082Z,1520520242.082 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 140
2018-03-08T14:44:02.082Z,1520520242.082 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T14:44:02.094Z,1520520242.094 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T14:44:02.094Z,1520520242.094 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T14:44:02.095Z,1520520242.095 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T14:44:02.512Z,1520520242.512 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T14:44:02.516Z,1520520242.516 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 140
2018-03-08T14:44:02.517Z,1520520242.517 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T14:44:02.518Z,1520520242.518 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 140
2018-03-08T14:44:02.518Z,1520520242.518 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T14:44:02.519Z,1520520242.519 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 140
2018-03-08T14:44:02.903Z,1520520242.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T14:44:02.904Z,1520520242.904 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:44:02.904Z,1520520242.904 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:44:02.909Z,1520520242.909 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T14:44:02.910Z,1520520242.910 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:44:02.911Z,1520520242.911 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:44:02.911Z,1520520242.911 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T14:44:02.912Z,1520520242.912 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:44:02.912Z,1520520242.912 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:44:03.303Z,1520520243.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T14:44:03.305Z,1520520243.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:03.667Z,1520520243.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T14:44:03.667Z,1520520243.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:04.094Z,1520520244.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T14:44:04.095Z,1520520244.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:04.474Z,1520520244.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T14:44:04.474Z,1520520244.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:04.872Z,1520520244.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T14:44:04.873Z,1520520244.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:05.290Z,1520520245.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T14:44:05.291Z,1520520245.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:05.761Z,1520520245.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-08T14:44:05.762Z,1520520245.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:06.086Z,1520520246.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T14:44:06.087Z,1520520246.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:06.483Z,1520520246.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T14:44:06.484Z,1520520246.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:06.879Z,1520520246.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T14:44:06.880Z,1520520246.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:07.283Z,1520520247.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T14:44:07.284Z,1520520247.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:07.680Z,1520520247.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T14:44:07.681Z,1520520247.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:08.079Z,1520520248.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T14:44:08.080Z,1520520248.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:08.539Z,1520520248.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-08T14:44:08.545Z,1520520248.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:08.892Z,1520520248.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T14:44:08.893Z,1520520248.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:09.293Z,1520520249.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T14:44:09.294Z,1520520249.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:09.679Z,1520520249.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T14:44:09.680Z,1520520249.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:10.086Z,1520520250.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T14:44:10.087Z,1520520250.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:10.523Z,1520520250.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T14:44:10.524Z,1520520250.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:10.895Z,1520520250.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T14:44:10.896Z,1520520250.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:11.291Z,1520520251.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T14:44:11.294Z,1520520251.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:11.696Z,1520520251.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T14:44:11.697Z,1520520251.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:12.090Z,1520520252.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T14:44:12.091Z,1520520252.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:12.490Z,1520520252.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T14:44:12.491Z,1520520252.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:12.903Z,1520520252.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T14:44:12.904Z,1520520252.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:13.275Z,1520520253.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T14:44:13.276Z,1520520253.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:13.678Z,1520520253.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T14:44:13.679Z,1520520253.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:14.074Z,1520520254.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T14:44:14.075Z,1520520254.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:14.484Z,1520520254.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T14:44:14.485Z,1520520254.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:14.891Z,1520520254.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T14:44:14.892Z,1520520254.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:15.286Z,1520520255.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T14:44:15.287Z,1520520255.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:15.684Z,1520520255.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T14:44:15.689Z,1520520255.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:16.086Z,1520520256.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T14:44:16.087Z,1520520256.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:16.489Z,1520520256.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T14:44:16.490Z,1520520256.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:16.887Z,1520520256.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T14:44:16.888Z,1520520256.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:17.326Z,1520520257.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T14:44:17.327Z,1520520257.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:17.693Z,1520520257.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T14:44:17.694Z,1520520257.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:18.092Z,1520520258.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T14:44:18.093Z,1520520258.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:18.483Z,1520520258.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T14:44:18.485Z,1520520258.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:18.899Z,1520520258.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T14:44:18.900Z,1520520258.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:19.279Z,1520520259.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T14:44:19.279Z,1520520259.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:19.679Z,1520520259.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T14:44:19.680Z,1520520259.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:20.089Z,1520520260.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T14:44:20.090Z,1520520260.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:20.499Z,1520520260.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T14:44:20.499Z,1520520260.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:20.905Z,1520520260.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T14:44:20.906Z,1520520260.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:21.346Z,1520520261.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T14:44:21.347Z,1520520261.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:21.689Z,1520520261.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T14:44:21.690Z,1520520261.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:22.089Z,1520520262.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:22.498Z,1520520262.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:22.863Z,1520520262.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:23.297Z,1520520263.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:23.698Z,1520520263.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:24.101Z,1520520264.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:24.490Z,1520520264.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:24.874Z,1520520264.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:25.271Z,1520520265.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:25.679Z,1520520265.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:26.077Z,1520520266.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:26.484Z,1520520266.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:26.914Z,1520520266.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:27.312Z,1520520267.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:27.672Z,1520520267.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:28.079Z,1520520268.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:28.479Z,1520520268.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:28.880Z,1520520268.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:29.295Z,1520520269.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:29.725Z,1520520269.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:30.088Z,1520520270.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:30.482Z,1520520270.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:30.878Z,1520520270.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:31.286Z,1520520271.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:31.682Z,1520520271.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:32.086Z,1520520272.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:32.529Z,1520520272.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:32.891Z,1520520272.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:33.295Z,1520520273.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:33.703Z,1520520273.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:34.091Z,1520520274.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:34.503Z,1520520274.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:34.894Z,1520520274.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:35.306Z,1520520275.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:35.695Z,1520520275.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:39.494Z,1520520279.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:39.619Z,1520520279.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:39.984Z,1520520279.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:40.382Z,1520520280.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:40.778Z,1520520280.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:41.209Z,1520520281.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:41.609Z,1520520281.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:41.980Z,1520520281.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:42.379Z,1520520282.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:42.786Z,1520520282.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:43.188Z,1520520283.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:43.614Z,1520520283.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:43.984Z,1520520283.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:44.386Z,1520520284.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:44.789Z,1520520284.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:45.192Z,1520520285.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:45.592Z,1520520285.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:45.993Z,1520520285.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:46.380Z,1520520286.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:46.779Z,1520520286.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:47.206Z,1520520287.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:47.596Z,1520520287.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:47.992Z,1520520287.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:48.383Z,1520520288.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:48.783Z,1520520288.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:49.193Z,1520520289.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:49.589Z,1520520289.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:49.992Z,1520520289.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:50.380Z,1520520290.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:50.783Z,1520520290.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:51.193Z,1520520291.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:51.592Z,1520520291.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:51.993Z,1520520291.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:52.380Z,1520520292.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:52.779Z,1520520292.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:53.200Z,1520520293.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:53.596Z,1520520293.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:54.006Z,1520520294.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:54.386Z,1520520294.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:54.790Z,1520520294.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:55.195Z,1520520295.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:55.597Z,1520520295.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:55.999Z,1520520295.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:56.384Z,1520520296.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:56.819Z,1520520296.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:57.193Z,1520520297.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:57.642Z,1520520297.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:57.997Z,1520520297.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:58.401Z,1520520298.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:58.807Z,1520520298.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:59.196Z,1520520299.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:44:59.606Z,1520520299.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:00.019Z,1520520300.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:00.383Z,1520520300.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:00.783Z,1520520300.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:01.191Z,1520520301.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:01.589Z,1520520301.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:02.015Z,1520520302.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:02.387Z,1520520302.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:02.784Z,1520520302.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:03.187Z,1520520303.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:03.588Z,1520520303.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:03.989Z,1520520303.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:04.384Z,1520520304.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:04.782Z,1520520304.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:05.190Z,1520520305.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:05.594Z,1520520305.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:06.023Z,1520520306.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:06.389Z,1520520306.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:06.787Z,1520520306.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:07.201Z,1520520307.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:07.598Z,1520520307.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:07.000Z,1520520308.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:08.389Z,1520520308.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:08.838Z,1520520308.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:09.205Z,1520520309.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:09.606Z,1520520309.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:09.995Z,1520520309.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:10.391Z,1520520310.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:10.795Z,1520520310.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:11.203Z,1520520311.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:11.580Z,1520520311.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:11.997Z,1520520311.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:12.376Z,1520520312.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:12.771Z,1520520312.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:13.197Z,1520520313.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:13.599Z,1520520313.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:13.976Z,1520520313.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:14.379Z,1520520314.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:14.778Z,1520520314.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:15.203Z,1520520315.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:15.607Z,1520520315.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:16.005Z,1520520316.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:16.372Z,1520520316.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:16.779Z,1520520316.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:17.202Z,1520520317.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:17.576Z,1520520317.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:18.003Z,1520520318.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:18.378Z,1520520318.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:18.775Z,1520520318.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:19.199Z,1520520319.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:19.600Z,1520520319.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:19.988Z,1520520319.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:20.379Z,1520520320.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:20.779Z,1520520320.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:21.192Z,1520520321.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:21.588Z,1520520321.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:21.985Z,1520520321.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:22.386Z,1520520322.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:22.778Z,1520520322.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:23.184Z,1520520323.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:23.583Z,1520520323.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:23.985Z,1520520323.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:24.379Z,1520520324.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:24.776Z,1520520324.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:25.192Z,1520520325.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:25.587Z,1520520325.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:25.993Z,1520520325.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:26.386Z,1520520326.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:26.783Z,1520520326.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:27.187Z,1520520327.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:27.594Z,1520520327.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:27.988Z,1520520327.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:28.399Z,1520520328.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:28.780Z,1520520328.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:29.220Z,1520520329.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:29.591Z,1520520329.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:29.991Z,1520520329.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:30.444Z,1520520330.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:30.771Z,1520520330.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:31.211Z,1520520331.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:31.604Z,1520520331.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:31.987Z,1520520331.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:32.386Z,1520520332.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:32.777Z,1520520332.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:33.206Z,1520520333.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:33.585Z,1520520333.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:34.007Z,1520520334.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:34.388Z,1520520334.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:34.779Z,1520520334.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:35.178Z,1520520335.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:35.583Z,1520520335.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:35.989Z,1520520335.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:39.327Z,1520520339.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:39.470Z,1520520339.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:39.799Z,1520520339.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:40.206Z,1520520340.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:40.600Z,1520520340.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:40.998Z,1520520340.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:41.406Z,1520520341.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:41.825Z,1520520341.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:42.214Z,1520520342.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:42.602Z,1520520342.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:42.995Z,1520520342.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:43.419Z,1520520343.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:43.809Z,1520520343.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:44.211Z,1520520344.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:44.616Z,1520520344.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:45.064Z,1520520345.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:45.401Z,1520520345.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:45.804Z,1520520345.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:46.214Z,1520520346.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:46.619Z,1520520346.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:47.023Z,1520520347.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:47.406Z,1520520347.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:47.809Z,1520520347.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:48.211Z,1520520348.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:48.627Z,1520520348.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:49.021Z,1520520349.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:49.409Z,1520520349.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:49.822Z,1520520349.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:50.210Z,1520520350.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:50.619Z,1520520350.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:51.026Z,1520520351.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:51.429Z,1520520351.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:51.823Z,1520520351.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:52.219Z,1520520352.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:52.612Z,1520520352.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:53.022Z,1520520353.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:53.394Z,1520520353.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:53.799Z,1520520353.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:54.218Z,1520520354.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:54.600Z,1520520354.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:55.004Z,1520520355.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:55.400Z,1520520355.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:55.801Z,1520520355.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:56.231Z,1520520356.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:56.614Z,1520520356.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:57.015Z,1520520357.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:57.401Z,1520520357.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:57.799Z,1520520357.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:58.209Z,1520520358.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:58.615Z,1520520358.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:59.015Z,1520520359.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:59.438Z,1520520359.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:45:59.799Z,1520520359.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:00.209Z,1520520360.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:00.622Z,1520520360.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:01.015Z,1520520361.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:01.406Z,1520520361.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:01.811Z,1520520361.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:02.212Z,1520520362.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:02.615Z,1520520362.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:03.013Z,1520520363.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:03.405Z,1520520363.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:03.804Z,1520520363.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:04.214Z,1520520364.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:04.645Z,1520520364.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:05.013Z,1520520365.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:05.413Z,1520520365.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:05.811Z,1520520365.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:06.221Z,1520520366.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:06.656Z,1520520366.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:07.008Z,1520520367.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:07.407Z,1520520367.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:07.818Z,1520520367.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:08.216Z,1520520368.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:08.618Z,1520520368.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:09.016Z,1520520369.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:09.414Z,1520520369.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:09.814Z,1520520369.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:10.238Z,1520520370.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:10.616Z,1520520370.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:11.018Z,1520520371.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:11.401Z,1520520371.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:11.797Z,1520520371.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:12.216Z,1520520372.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:12.618Z,1520520372.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:13.010Z,1520520373.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:13.404Z,1520520373.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:13.811Z,1520520373.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:14.214Z,1520520374.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:14.615Z,1520520374.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:15.018Z,1520520375.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:15.404Z,1520520375.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:15.811Z,1520520375.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:16.216Z,1520520376.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:16.609Z,1520520376.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:17.011Z,1520520377.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:17.413Z,1520520377.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:17.816Z,1520520377.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:18.210Z,1520520378.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:18.616Z,1520520378.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:19.007Z,1520520379.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:19.394Z,1520520379.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:19.797Z,1520520379.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:20.228Z,1520520380.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:20.616Z,1520520380.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:21.027Z,1520520381.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:21.396Z,1520520381.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:21.792Z,1520520381.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:22.224Z,1520520382.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:22.623Z,1520520382.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:23.031Z,1520520383.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:23.396Z,1520520383.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:23.787Z,1520520383.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:24.216Z,1520520384.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:24.617Z,1520520384.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:25.020Z,1520520385.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:25.396Z,1520520385.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:25.795Z,1520520385.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:26.216Z,1520520386.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:26.618Z,1520520386.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:27.039Z,1520520387.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:27.400Z,1520520387.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:27.799Z,1520520387.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:28.228Z,1520520388.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:28.630Z,1520520388.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:29.027Z,1520520389.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:29.401Z,1520520389.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:29.793Z,1520520389.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:30.216Z,1520520390.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:30.621Z,1520520390.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:31.000Z,1520520391.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:31.400Z,1520520391.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:31.846Z,1520520391.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:32.201Z,1520520392.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:32.626Z,1520520392.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:33.029Z,1520520393.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:33.403Z,1520520393.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:33.806Z,1520520393.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:34.251Z,1520520394.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:34.611Z,1520520394.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:35.011Z,1520520395.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:35.405Z,1520520395.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:35.800Z,1520520395.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:36.212Z,1520520396.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:40.344Z,1520520400.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:40.486Z,1520520400.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:40.840Z,1520520400.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:41.219Z,1520520401.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:41.653Z,1520520401.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:42.019Z,1520520402.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:42.443Z,1520520402.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:42.842Z,1520520402.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:43.220Z,1520520403.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:43.617Z,1520520403.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:44.018Z,1520520404.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:44.431Z,1520520404.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:44.823Z,1520520404.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:45.231Z,1520520405.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:45.634Z,1520520405.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:46.032Z,1520520406.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:46.418Z,1520520406.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:46.816Z,1520520406.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:47.230Z,1520520407.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:47.638Z,1520520407.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:48.024Z,1520520408.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:48.419Z,1520520408.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:48.820Z,1520520408.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:49.231Z,1520520409.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:49.628Z,1520520409.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:50.028Z,1520520410.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:50.425Z,1520520410.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:50.818Z,1520520410.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:51.238Z,1520520411.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:51.638Z,1520520411.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:52.033Z,1520520412.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:52.420Z,1520520412.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:52.821Z,1520520412.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:53.232Z,1520520413.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:53.629Z,1520520413.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:54.024Z,1520520414.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:54.419Z,1520520414.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:54.826Z,1520520414.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:55.224Z,1520520415.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:55.629Z,1520520415.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:56.038Z,1520520416.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:56.426Z,1520520416.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:56.819Z,1520520416.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:57.232Z,1520520417.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:57.634Z,1520520417.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:58.038Z,1520520418.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:58.423Z,1520520418.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:58.807Z,1520520418.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:59.258Z,1520520419.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:46:59.631Z,1520520419.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:00.051Z,1520520420.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:00.445Z,1520520420.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:00.826Z,1520520420.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:01.226Z,1520520421.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:01.620Z,1520520421.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:02.022Z,1520520422.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:02.434Z,1520520422.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:02.834Z,1520520422.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:03.225Z,1520520423.225 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:03.225Z,1520520423.225 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 141
2018-03-08T14:47:03.225Z,1520520423.225 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T14:47:03.227Z,1520520423.227 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:03.227Z,1520520423.227 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 141
2018-03-08T14:47:03.227Z,1520520423.227 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T14:47:03.229Z,1520520423.229 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:03.229Z,1520520423.229 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 141
2018-03-08T14:47:03.229Z,1520520423.229 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T14:47:03.265Z,1520520423.265 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T14:47:03.265Z,1520520423.265 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T14:47:03.265Z,1520520423.265 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T14:47:03.626Z,1520520423.626 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T14:47:03.626Z,1520520423.626 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 141
2018-03-08T14:47:03.627Z,1520520423.627 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T14:47:03.627Z,1520520423.627 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 141
2018-03-08T14:47:03.627Z,1520520423.627 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T14:47:03.627Z,1520520423.627 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 141
2018-03-08T14:47:04.025Z,1520520424.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T14:47:04.026Z,1520520424.026 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:47:04.026Z,1520520424.026 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:47:04.026Z,1520520424.026 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T14:47:04.027Z,1520520424.027 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:47:04.027Z,1520520424.027 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:47:04.027Z,1520520424.027 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T14:47:04.028Z,1520520424.028 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:47:04.028Z,1520520424.028 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:47:04.443Z,1520520424.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T14:47:04.444Z,1520520424.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:04.846Z,1520520424.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T14:47:04.847Z,1520520424.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:05.242Z,1520520425.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T14:47:05.243Z,1520520425.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:05.629Z,1520520425.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T14:47:05.630Z,1520520425.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:06.047Z,1520520426.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T14:47:06.048Z,1520520426.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:06.435Z,1520520426.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T14:47:06.436Z,1520520426.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:06.814Z,1520520426.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T14:47:06.815Z,1520520426.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:07.248Z,1520520427.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T14:47:07.253Z,1520520427.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:07.646Z,1520520427.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T14:47:07.647Z,1520520427.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:08.023Z,1520520428.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T14:47:08.024Z,1520520428.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:08.424Z,1520520428.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T14:47:08.426Z,1520520428.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:08.823Z,1520520428.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T14:47:08.824Z,1520520428.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:09.221Z,1520520429.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T14:47:09.222Z,1520520429.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:09.617Z,1520520429.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T14:47:09.618Z,1520520429.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:10.019Z,1520520430.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T14:47:10.020Z,1520520430.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:10.410Z,1520520430.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T14:47:10.411Z,1520520430.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:10.861Z,1520520430.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T14:47:10.862Z,1520520430.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:11.253Z,1520520431.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T14:47:11.254Z,1520520431.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:11.626Z,1520520431.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T14:47:11.627Z,1520520431.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:12.030Z,1520520432.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T14:47:12.031Z,1520520432.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:12.422Z,1520520432.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T14:47:12.423Z,1520520432.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:12.824Z,1520520432.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T14:47:12.830Z,1520520432.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:13.224Z,1520520433.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T14:47:13.225Z,1520520433.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:13.630Z,1520520433.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T14:47:13.631Z,1520520433.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:14.024Z,1520520434.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T14:47:14.025Z,1520520434.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:14.415Z,1520520434.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T14:47:14.416Z,1520520434.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:14.818Z,1520520434.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T14:47:14.819Z,1520520434.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:15.228Z,1520520435.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T14:47:15.229Z,1520520435.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:15.628Z,1520520435.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T14:47:15.629Z,1520520435.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:16.034Z,1520520436.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T14:47:16.035Z,1520520436.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:16.419Z,1520520436.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T14:47:16.421Z,1520520436.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:16.816Z,1520520436.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T14:47:16.817Z,1520520436.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:17.287Z,1520520437.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-08T14:47:17.288Z,1520520437.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:17.624Z,1520520437.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T14:47:17.629Z,1520520437.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:18.031Z,1520520438.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T14:47:18.032Z,1520520438.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:18.406Z,1520520438.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T14:47:18.407Z,1520520438.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:18.806Z,1520520438.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T14:47:18.807Z,1520520438.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:19.235Z,1520520439.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T14:47:19.236Z,1520520439.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:19.633Z,1520520439.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T14:47:19.634Z,1520520439.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:20.035Z,1520520440.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T14:47:20.036Z,1520520440.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:20.411Z,1520520440.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T14:47:20.412Z,1520520440.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:20.810Z,1520520440.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T14:47:20.810Z,1520520440.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:21.242Z,1520520441.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T14:47:21.243Z,1520520441.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:21.646Z,1520520441.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T14:47:21.647Z,1520520441.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:22.043Z,1520520442.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T14:47:22.044Z,1520520442.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:22.415Z,1520520442.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T14:47:22.416Z,1520520442.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:22.812Z,1520520442.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T14:47:22.813Z,1520520442.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:23.244Z,1520520443.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:23.615Z,1520520443.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:24.020Z,1520520444.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:24.447Z,1520520444.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:24.818Z,1520520444.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:25.220Z,1520520445.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:25.622Z,1520520445.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:26.070Z,1520520446.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:26.425Z,1520520446.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:26.826Z,1520520446.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:27.225Z,1520520447.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:27.627Z,1520520447.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:28.039Z,1520520448.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:28.420Z,1520520448.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:28.818Z,1520520448.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:29.229Z,1520520449.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:29.625Z,1520520449.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:30.035Z,1520520450.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:30.426Z,1520520450.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:30.808Z,1520520450.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:31.242Z,1520520451.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:31.632Z,1520520451.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:32.024Z,1520520452.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:32.423Z,1520520452.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:32.827Z,1520520452.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:33.229Z,1520520453.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:33.631Z,1520520453.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:34.034Z,1520520454.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:34.425Z,1520520454.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:34.825Z,1520520454.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:35.230Z,1520520455.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:35.634Z,1520520455.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:36.034Z,1520520456.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:36.430Z,1520520456.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:39.527Z,1520520459.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:39.675Z,1520520459.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:40.021Z,1520520460.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:40.417Z,1520520460.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:40.801Z,1520520460.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:41.206Z,1520520461.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:41.606Z,1520520461.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:42.006Z,1520520462.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:42.422Z,1520520462.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:42.822Z,1520520462.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:43.218Z,1520520463.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:43.601Z,1520520463.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:44.002Z,1520520464.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:44.399Z,1520520464.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:44.804Z,1520520464.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:45.213Z,1520520465.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:45.613Z,1520520465.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:46.009Z,1520520466.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:46.408Z,1520520466.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:46.806Z,1520520466.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:47.218Z,1520520467.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:47.619Z,1520520467.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:48.014Z,1520520468.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:48.405Z,1520520468.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:48.807Z,1520520468.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:49.213Z,1520520469.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:49.614Z,1520520469.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:50.012Z,1520520470.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:50.411Z,1520520470.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:50.910Z,1520520470.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:51.213Z,1520520471.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:51.620Z,1520520471.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:52.002Z,1520520472.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:52.443Z,1520520472.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:52.839Z,1520520472.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:53.211Z,1520520473.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:53.645Z,1520520473.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:54.005Z,1520520474.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:54.391Z,1520520474.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:54.794Z,1520520474.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:55.204Z,1520520475.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:55.658Z,1520520475.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:56.013Z,1520520476.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:56.410Z,1520520476.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:56.810Z,1520520476.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:57.214Z,1520520477.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:57.623Z,1520520477.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:58.022Z,1520520478.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:58.399Z,1520520478.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:58.810Z,1520520478.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:59.214Z,1520520479.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:47:59.612Z,1520520479.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:00.012Z,1520520480.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:00.403Z,1520520480.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:00.799Z,1520520480.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:01.208Z,1520520481.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:01.698Z,1520520481.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:02.015Z,1520520482.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:02.396Z,1520520482.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:02.831Z,1520520482.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:03.220Z,1520520483.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:03.626Z,1520520483.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:04.023Z,1520520484.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:04.391Z,1520520484.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:04.797Z,1520520484.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:05.219Z,1520520485.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:05.619Z,1520520485.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:06.025Z,1520520486.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:06.395Z,1520520486.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:06.802Z,1520520486.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:07.224Z,1520520487.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:07.624Z,1520520487.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:08.004Z,1520520488.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:08.399Z,1520520488.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:08.796Z,1520520488.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:09.204Z,1520520489.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:09.640Z,1520520489.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:10.014Z,1520520490.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:10.407Z,1520520490.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:10.801Z,1520520490.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:11.215Z,1520520491.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:11.619Z,1520520491.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:12.012Z,1520520492.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:12.409Z,1520520492.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:12.803Z,1520520492.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:13.209Z,1520520493.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:13.615Z,1520520493.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:14.008Z,1520520494.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:14.411Z,1520520494.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:14.807Z,1520520494.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:15.219Z,1520520495.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:15.614Z,1520520495.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:16.014Z,1520520496.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:16.411Z,1520520496.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:16.810Z,1520520496.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:17.217Z,1520520497.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:17.622Z,1520520497.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:18.015Z,1520520498.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:18.408Z,1520520498.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:18.814Z,1520520498.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:19.223Z,1520520499.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:19.617Z,1520520499.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:20.015Z,1520520500.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:20.395Z,1520520500.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:20.794Z,1520520500.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:21.217Z,1520520501.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:21.623Z,1520520501.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:22.026Z,1520520502.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:22.396Z,1520520502.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:22.818Z,1520520502.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:23.226Z,1520520503.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:23.620Z,1520520503.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:24.020Z,1520520504.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:24.394Z,1520520504.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:24.803Z,1520520504.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:25.206Z,1520520505.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:25.636Z,1520520505.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:26.004Z,1520520506.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:26.439Z,1520520506.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:26.839Z,1520520506.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:27.210Z,1520520507.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:27.608Z,1520520507.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:28.005Z,1520520508.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:28.406Z,1520520508.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:28.798Z,1520520508.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:29.204Z,1520520509.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:29.604Z,1520520509.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:30.005Z,1520520510.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:30.402Z,1520520510.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:30.797Z,1520520510.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:31.205Z,1520520511.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:31.604Z,1520520511.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:32.004Z,1520520512.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:32.407Z,1520520512.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:32.802Z,1520520512.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:33.204Z,1520520513.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:33.608Z,1520520513.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:34.010Z,1520520514.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:34.400Z,1520520514.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:34.810Z,1520520514.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:35.204Z,1520520515.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:35.604Z,1520520515.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:35.607Z,1520520515.607 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T14:43:35.3Z
2018-03-08T14:48:35.607Z,1520520515.607 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T14:48:35.607Z,1520520515.607 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T14:48:36.030Z,1520520516.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:36.549Z,1520520516.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:36.842Z,1520520516.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:40.286Z,1520520520.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:40.365Z,1520520520.365 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0164.lzma
2018-03-08T14:48:40.451Z,1520520520.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:40.818Z,1520520520.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:41.147Z,1520520521.147 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0164.lzma.bak
2018-03-08T14:48:41.147Z,1520520521.147 [DataOverHttps](INFO): SBD MOMSN=7986586
2018-03-08T14:48:41.205Z,1520520521.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:41.791Z,1520520521.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:42.014Z,1520520522.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:45.103Z,1520520525.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:45.266Z,1520520525.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:45.593Z,1520520525.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:45.972Z,1520520525.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:46.395Z,1520520526.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:46.778Z,1520520526.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:47.202Z,1520520527.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:51.102Z,1520520531.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:51.266Z,1520520531.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:51.540Z,1520520531.540 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0165.lzma
2018-03-08T14:48:51.577Z,1520520531.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:51.976Z,1520520531.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:52.338Z,1520520532.338 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0165.lzma.bak
2018-03-08T14:48:52.338Z,1520520532.338 [DataOverHttps](INFO): SBD MOMSN=7986588
2018-03-08T14:48:52.383Z,1520520532.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:52.964Z,1520520532.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:52.967Z,1520520532.967 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T14:48:52.968Z,1520520532.968 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T14:48:52.968Z,1520520532.968 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T14:48:53.201Z,1520520533.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:53.580Z,1520520533.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:57.061Z,1520520537.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:57.207Z,1520520537.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:57.536Z,1520520537.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:57.990Z,1520520537.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:58.363Z,1520520538.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:58.768Z,1520520538.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:59.164Z,1520520539.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:59.533Z,1520520539.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:48:59.940Z,1520520539.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:00.340Z,1520520540.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:00.733Z,1520520540.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:01.161Z,1520520541.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:01.559Z,1520520541.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:01.958Z,1520520541.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:02.356Z,1520520542.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:02.805Z,1520520542.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:03.163Z,1520520543.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:03.539Z,1520520543.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:03.935Z,1520520543.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:04.341Z,1520520544.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:04.759Z,1520520544.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:05.163Z,1520520545.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:05.533Z,1520520545.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:05.986Z,1520520545.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:06.343Z,1520520546.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:06.733Z,1520520546.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:07.152Z,1520520547.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:07.563Z,1520520547.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:07.961Z,1520520547.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:08.356Z,1520520548.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:08.739Z,1520520548.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:09.144Z,1520520549.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:09.539Z,1520520549.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:09.946Z,1520520549.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:10.347Z,1520520550.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:10.751Z,1520520550.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:11.167Z,1520520551.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:11.549Z,1520520551.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:11.945Z,1520520551.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:12.355Z,1520520552.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:12.724Z,1520520552.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:13.150Z,1520520553.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:13.570Z,1520520553.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:13.961Z,1520520553.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:14.354Z,1520520554.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:14.730Z,1520520554.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:15.127Z,1520520555.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:15.554Z,1520520555.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:15.931Z,1520520555.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:16.356Z,1520520556.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:16.760Z,1520520556.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:17.162Z,1520520557.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:17.549Z,1520520557.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:17.937Z,1520520557.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:18.339Z,1520520558.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:18.735Z,1520520558.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:19.139Z,1520520559.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:19.564Z,1520520559.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:19.937Z,1520520559.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:20.344Z,1520520560.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:20.740Z,1520520560.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:21.143Z,1520520561.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:21.540Z,1520520561.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:21.939Z,1520520561.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:22.345Z,1520520562.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:22.768Z,1520520562.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:23.144Z,1520520563.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:23.541Z,1520520563.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:23.946Z,1520520563.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:24.340Z,1520520564.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:24.751Z,1520520564.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:25.146Z,1520520565.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:25.553Z,1520520565.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:25.961Z,1520520565.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:26.353Z,1520520566.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:26.737Z,1520520566.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:27.137Z,1520520567.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:27.546Z,1520520567.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:27.943Z,1520520567.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:28.353Z,1520520568.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:28.755Z,1520520568.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:29.153Z,1520520569.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:29.542Z,1520520569.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:29.946Z,1520520569.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:30.343Z,1520520570.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:30.746Z,1520520570.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:31.147Z,1520520571.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:31.554Z,1520520571.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:31.949Z,1520520571.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:32.349Z,1520520572.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:32.739Z,1520520572.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:33.147Z,1520520573.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:33.545Z,1520520573.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:33.942Z,1520520573.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:34.352Z,1520520574.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:34.758Z,1520520574.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:35.153Z,1520520575.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:35.541Z,1520520575.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:35.945Z,1520520575.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:36.341Z,1520520576.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:36.753Z,1520520576.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:37.155Z,1520520577.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:37.553Z,1520520577.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:37.952Z,1520520577.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:38.351Z,1520520578.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:38.746Z,1520520578.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:39.147Z,1520520579.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:39.549Z,1520520579.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:39.951Z,1520520579.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:40.357Z,1520520580.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:40.755Z,1520520580.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:41.158Z,1520520581.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:41.551Z,1520520581.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:41.954Z,1520520581.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:42.410Z,1520520582.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:42.766Z,1520520582.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:43.153Z,1520520583.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:43.557Z,1520520583.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:43.950Z,1520520583.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:44.350Z,1520520584.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:44.731Z,1520520584.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:45.131Z,1520520585.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:45.532Z,1520520585.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:45.961Z,1520520585.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:46.360Z,1520520586.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:46.761Z,1520520586.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:47.170Z,1520520587.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:47.535Z,1520520587.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:47.942Z,1520520587.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:48.341Z,1520520588.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:48.738Z,1520520588.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:49.145Z,1520520589.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:49.559Z,1520520589.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:49.955Z,1520520589.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:50.355Z,1520520590.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:50.746Z,1520520590.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:51.127Z,1520520591.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:51.547Z,1520520591.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:51.931Z,1520520591.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:52.363Z,1520520592.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:52.755Z,1520520592.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:53.157Z,1520520593.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:53.529Z,1520520593.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:57.474Z,1520520597.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:57.615Z,1520520597.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:58.007Z,1520520598.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:58.385Z,1520520598.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:58.781Z,1520520598.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:59.178Z,1520520599.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:59.582Z,1520520599.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:49:59.970Z,1520520599.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:00.381Z,1520520600.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:00.784Z,1520520600.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:01.189Z,1520520601.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:01.582Z,1520520601.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:01.979Z,1520520601.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:02.391Z,1520520602.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:02.786Z,1520520602.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:03.189Z,1520520603.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:03.588Z,1520520603.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:04.019Z,1520520604.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:04.415Z,1520520604.415 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:04.415Z,1520520604.415 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 142
2018-03-08T14:50:04.415Z,1520520604.415 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T14:50:04.417Z,1520520604.417 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:04.417Z,1520520604.417 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 142
2018-03-08T14:50:04.417Z,1520520604.417 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T14:50:04.419Z,1520520604.419 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:04.419Z,1520520604.419 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 142
2018-03-08T14:50:04.419Z,1520520604.419 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T14:50:04.443Z,1520520604.443 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T14:50:04.443Z,1520520604.443 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T14:50:04.444Z,1520520604.444 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T14:50:04.788Z,1520520604.788 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T14:50:04.788Z,1520520604.788 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 142
2018-03-08T14:50:04.789Z,1520520604.789 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T14:50:04.789Z,1520520604.789 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 142
2018-03-08T14:50:04.789Z,1520520604.789 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T14:50:04.789Z,1520520604.789 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 142
2018-03-08T14:50:05.189Z,1520520605.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T14:50:05.190Z,1520520605.190 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:50:05.190Z,1520520605.190 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:50:05.191Z,1520520605.191 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T14:50:05.191Z,1520520605.191 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:50:05.191Z,1520520605.191 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:50:05.192Z,1520520605.192 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T14:50:05.192Z,1520520605.192 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:50:05.192Z,1520520605.192 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:50:05.594Z,1520520605.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T14:50:05.595Z,1520520605.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:05.988Z,1520520605.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T14:50:05.989Z,1520520605.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:06.375Z,1520520606.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T14:50:06.376Z,1520520606.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:06.777Z,1520520606.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T14:50:06.778Z,1520520606.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:07.184Z,1520520607.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T14:50:07.186Z,1520520607.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:07.587Z,1520520607.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T14:50:07.589Z,1520520607.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:07.999Z,1520520607.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T14:50:07.000Z,1520520608.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:08.380Z,1520520608.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T14:50:08.381Z,1520520608.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:08.786Z,1520520608.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T14:50:08.787Z,1520520608.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:09.189Z,1520520609.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T14:50:09.190Z,1520520609.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:09.585Z,1520520609.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T14:50:09.586Z,1520520609.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:09.990Z,1520520609.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T14:50:09.991Z,1520520609.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:10.381Z,1520520610.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T14:50:10.382Z,1520520610.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:10.784Z,1520520610.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T14:50:10.789Z,1520520610.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:11.186Z,1520520611.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T14:50:11.187Z,1520520611.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:11.589Z,1520520611.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T14:50:11.590Z,1520520611.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:11.991Z,1520520611.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T14:50:11.992Z,1520520611.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:12.391Z,1520520612.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T14:50:12.392Z,1520520612.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:12.843Z,1520520612.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T14:50:12.844Z,1520520612.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:13.187Z,1520520613.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T14:50:13.188Z,1520520613.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:13.598Z,1520520613.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T14:50:13.599Z,1520520613.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:13.990Z,1520520613.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T14:50:13.991Z,1520520613.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:14.385Z,1520520614.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T14:50:14.385Z,1520520614.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:14.785Z,1520520614.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T14:50:14.786Z,1520520614.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:15.189Z,1520520615.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T14:50:15.190Z,1520520615.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:15.594Z,1520520615.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T14:50:15.595Z,1520520615.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:15.994Z,1520520615.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T14:50:15.995Z,1520520615.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:16.389Z,1520520616.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T14:50:16.390Z,1520520616.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:16.762Z,1520520616.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2018-03-08T14:50:16.763Z,1520520616.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:17.191Z,1520520617.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T14:50:17.192Z,1520520617.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:17.593Z,1520520617.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T14:50:17.594Z,1520520617.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:17.992Z,1520520617.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T14:50:17.997Z,1520520617.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:18.374Z,1520520618.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T14:50:18.375Z,1520520618.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:18.773Z,1520520618.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T14:50:18.774Z,1520520618.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:19.172Z,1520520619.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T14:50:19.173Z,1520520619.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:19.597Z,1520520619.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T14:50:19.598Z,1520520619.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:20.002Z,1520520620.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T14:50:20.003Z,1520520620.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:20.374Z,1520520620.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T14:50:20.375Z,1520520620.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:20.798Z,1520520620.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T14:50:20.799Z,1520520620.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:21.203Z,1520520621.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T14:50:21.204Z,1520520621.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:21.573Z,1520520621.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T14:50:21.574Z,1520520621.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:21.979Z,1520520621.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T14:50:21.981Z,1520520621.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:22.375Z,1520520622.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T14:50:22.376Z,1520520622.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:22.773Z,1520520622.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T14:50:22.774Z,1520520622.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:23.184Z,1520520623.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T14:50:23.201Z,1520520623.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:23.608Z,1520520623.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T14:50:23.609Z,1520520623.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:23.978Z,1520520623.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T14:50:23.979Z,1520520623.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:24.374Z,1520520624.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T14:50:24.375Z,1520520624.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:24.775Z,1520520624.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:25.179Z,1520520625.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:25.588Z,1520520625.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:25.984Z,1520520625.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:26.382Z,1520520626.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:26.777Z,1520520626.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:27.185Z,1520520627.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:27.579Z,1520520627.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:27.980Z,1520520627.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:28.386Z,1520520628.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:28.771Z,1520520628.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:29.179Z,1520520629.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:29.584Z,1520520629.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:29.979Z,1520520629.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:30.383Z,1520520630.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:30.778Z,1520520630.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:31.180Z,1520520631.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:31.580Z,1520520631.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:31.985Z,1520520631.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:32.383Z,1520520632.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:32.783Z,1520520632.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:33.185Z,1520520633.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:33.584Z,1520520633.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:33.980Z,1520520633.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:34.379Z,1520520634.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:34.777Z,1520520634.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:35.181Z,1520520635.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:35.585Z,1520520635.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:35.981Z,1520520635.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:36.383Z,1520520636.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:36.774Z,1520520636.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:37.181Z,1520520637.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:37.580Z,1520520637.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:37.981Z,1520520637.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:38.389Z,1520520638.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:38.789Z,1520520638.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:39.194Z,1520520639.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:39.595Z,1520520639.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:39.988Z,1520520639.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:40.367Z,1520520640.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:40.790Z,1520520640.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:41.196Z,1520520641.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:41.607Z,1520520641.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:41.976Z,1520520641.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:42.402Z,1520520642.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:42.774Z,1520520642.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:43.203Z,1520520643.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:43.609Z,1520520643.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:43.993Z,1520520643.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:44.377Z,1520520644.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:44.774Z,1520520644.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:45.201Z,1520520645.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:45.609Z,1520520645.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:45.976Z,1520520645.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:46.376Z,1520520646.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:46.773Z,1520520646.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:47.143Z,1520520647.143 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T14:50:47.144Z,1520520647.144 [NAL9602] Data Fault, FailCount= 5
2018-03-08T14:50:47.144Z,1520520647.144 [NAL9602](ERROR): Data Fault
2018-03-08T14:50:47.175Z,1520520647.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:47.209Z,1520520647.209 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T14:50:47.209Z,1520520647.209 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-08T14:50:47.534Z,1520520647.534 [NAL9602](INFO): Powering down
2018-03-08T14:50:47.591Z,1520520647.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:47.607Z,1520520647.607 [CBIT](INFO): Critical error at 20180308T145047
2018-03-08T14:50:47.978Z,1520520647.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:48.375Z,1520520648.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:48.771Z,1520520648.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:49.174Z,1520520649.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:49.578Z,1520520649.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:49.970Z,1520520649.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:50.378Z,1520520650.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:50.778Z,1520520650.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:51.175Z,1520520651.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:51.565Z,1520520651.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:51.993Z,1520520651.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:52.381Z,1520520652.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:52.787Z,1520520652.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:53.187Z,1520520653.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:53.598Z,1520520653.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:56.702Z,1520520656.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:56.835Z,1520520656.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:57.191Z,1520520657.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:57.592Z,1520520657.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:57.996Z,1520520657.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:58.401Z,1520520658.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:58.792Z,1520520658.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:59.210Z,1520520659.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:50:59.600Z,1520520659.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:00.048Z,1520520660.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:00.394Z,1520520660.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:00.846Z,1520520660.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:01.205Z,1520520661.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:01.590Z,1520520661.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:01.996Z,1520520661.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:02.395Z,1520520662.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:02.811Z,1520520662.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:03.193Z,1520520663.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:03.595Z,1520520663.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:03.983Z,1520520663.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:04.393Z,1520520664.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:04.798Z,1520520664.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:05.175Z,1520520665.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:05.600Z,1520520665.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:06.003Z,1520520666.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:06.397Z,1520520666.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:06.784Z,1520520666.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:07.224Z,1520520667.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:07.580Z,1520520667.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:08.042Z,1520520668.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:08.390Z,1520520668.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:08.781Z,1520520668.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:09.188Z,1520520669.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:09.583Z,1520520669.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:09.982Z,1520520669.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:10.385Z,1520520670.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:10.787Z,1520520670.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:11.188Z,1520520671.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:11.590Z,1520520671.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:11.991Z,1520520671.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:12.387Z,1520520672.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:12.794Z,1520520672.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:13.190Z,1520520673.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:13.590Z,1520520673.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:13.989Z,1520520673.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:14.394Z,1520520674.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:14.788Z,1520520674.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:15.189Z,1520520675.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:15.591Z,1520520675.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:15.988Z,1520520675.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:16.394Z,1520520676.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:16.790Z,1520520676.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:17.187Z,1520520677.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:17.594Z,1520520677.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:17.990Z,1520520677.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:18.390Z,1520520678.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:18.798Z,1520520678.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:19.191Z,1520520679.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:19.590Z,1520520679.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:19.994Z,1520520679.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:20.392Z,1520520680.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:20.790Z,1520520680.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:21.188Z,1520520681.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:21.588Z,1520520681.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:21.987Z,1520520681.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:22.390Z,1520520682.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:22.787Z,1520520682.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:23.198Z,1520520683.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:23.590Z,1520520683.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:23.982Z,1520520683.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:24.384Z,1520520684.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:24.794Z,1520520684.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:25.182Z,1520520685.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:25.585Z,1520520685.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:25.989Z,1520520685.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:26.390Z,1520520686.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:26.786Z,1520520686.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:27.202Z,1520520687.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:27.589Z,1520520687.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:27.994Z,1520520687.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:28.397Z,1520520688.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:28.786Z,1520520688.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:29.201Z,1520520689.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:29.593Z,1520520689.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:29.990Z,1520520689.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:30.388Z,1520520690.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:30.800Z,1520520690.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:31.186Z,1520520691.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:31.591Z,1520520691.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:31.991Z,1520520691.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:32.393Z,1520520692.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:32.793Z,1520520692.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:33.194Z,1520520693.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:33.589Z,1520520693.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:33.993Z,1520520693.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:34.394Z,1520520694.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:34.794Z,1520520694.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:35.193Z,1520520695.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:35.594Z,1520520695.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:35.988Z,1520520695.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:36.393Z,1520520696.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:36.800Z,1520520696.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:37.190Z,1520520697.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:37.593Z,1520520697.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:38.090Z,1520520698.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:38.393Z,1520520698.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:38.805Z,1520520698.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:39.205Z,1520520699.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:39.574Z,1520520699.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:39.999Z,1520520699.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:40.407Z,1520520700.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:40.775Z,1520520700.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:41.180Z,1520520701.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:41.612Z,1520520701.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:41.976Z,1520520701.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:42.419Z,1520520702.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:42.787Z,1520520702.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:43.178Z,1520520703.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:43.583Z,1520520703.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:44.025Z,1520520704.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:44.403Z,1520520704.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:44.806Z,1520520704.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:45.198Z,1520520705.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:45.582Z,1520520705.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:45.996Z,1520520705.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:46.380Z,1520520706.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:46.774Z,1520520706.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:47.207Z,1520520707.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:47.614Z,1520520707.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:47.987Z,1520520707.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:48.386Z,1520520708.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:48.806Z,1520520708.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:49.189Z,1520520709.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:49.599Z,1520520709.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:49.996Z,1520520709.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:50.391Z,1520520710.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:50.403Z,1520520710.403 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T14:51:50.793Z,1520520710.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:51.201Z,1520520711.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:51.597Z,1520520711.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:51.995Z,1520520711.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:52.395Z,1520520712.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:52.791Z,1520520712.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:53.202Z,1520520713.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:53.595Z,1520520713.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:57.553Z,1520520717.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:57.690Z,1520520717.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:58.061Z,1520520718.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:58.414Z,1520520718.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:58.831Z,1520520718.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:59.234Z,1520520719.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:51:59.622Z,1520520719.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:00.019Z,1520520720.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:00.455Z,1520520720.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:00.824Z,1520520720.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:01.256Z,1520520721.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:01.668Z,1520520721.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:02.022Z,1520520722.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:02.427Z,1520520722.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:02.825Z,1520520722.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:03.232Z,1520520723.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:03.626Z,1520520723.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:04.026Z,1520520724.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:04.428Z,1520520724.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:04.826Z,1520520724.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:05.242Z,1520520725.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:05.625Z,1520520725.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:06.023Z,1520520726.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:06.429Z,1520520726.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:06.829Z,1520520726.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:07.219Z,1520520727.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:07.633Z,1520520727.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:08.033Z,1520520728.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:08.434Z,1520520728.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:08.817Z,1520520728.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:09.258Z,1520520729.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:09.619Z,1520520729.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:10.023Z,1520520730.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:10.421Z,1520520730.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:10.823Z,1520520730.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:11.221Z,1520520731.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:11.666Z,1520520731.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:12.018Z,1520520732.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:12.426Z,1520520732.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:12.823Z,1520520732.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:13.218Z,1520520733.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:13.628Z,1520520733.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:14.023Z,1520520734.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:14.425Z,1520520734.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:14.834Z,1520520734.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:15.238Z,1520520735.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:15.622Z,1520520735.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:16.027Z,1520520736.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:16.428Z,1520520736.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:16.826Z,1520520736.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:17.231Z,1520520737.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:17.632Z,1520520737.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:18.040Z,1520520738.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:18.430Z,1520520738.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:18.878Z,1520520738.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:19.223Z,1520520739.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:19.621Z,1520520739.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:20.027Z,1520520740.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:20.426Z,1520520740.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:20.821Z,1520520740.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:21.228Z,1520520741.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:21.615Z,1520520741.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:22.029Z,1520520742.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:22.427Z,1520520742.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:22.818Z,1520520742.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:23.240Z,1520520743.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:23.634Z,1520520743.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:24.007Z,1520520744.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:24.412Z,1520520744.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:24.815Z,1520520744.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:25.242Z,1520520745.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:25.634Z,1520520745.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:26.070Z,1520520746.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:26.421Z,1520520746.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:26.826Z,1520520746.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:27.230Z,1520520747.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:27.619Z,1520520747.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:28.025Z,1520520748.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:28.425Z,1520520748.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:28.815Z,1520520748.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:29.232Z,1520520749.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:29.623Z,1520520749.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:30.022Z,1520520750.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:30.420Z,1520520750.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:30.833Z,1520520750.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:31.229Z,1520520751.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:31.628Z,1520520751.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:32.034Z,1520520752.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:32.433Z,1520520752.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:32.829Z,1520520752.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:33.229Z,1520520753.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:33.625Z,1520520753.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:34.012Z,1520520754.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:34.434Z,1520520754.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:34.834Z,1520520754.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:35.234Z,1520520755.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:35.634Z,1520520755.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:36.025Z,1520520756.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:36.412Z,1520520756.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:36.815Z,1520520756.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:37.238Z,1520520757.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:37.621Z,1520520757.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:38.022Z,1520520758.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:38.421Z,1520520758.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:38.822Z,1520520758.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:39.219Z,1520520759.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:39.622Z,1520520759.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:40.017Z,1520520760.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:40.426Z,1520520760.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:40.819Z,1520520760.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:41.231Z,1520520761.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:41.629Z,1520520761.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:42.024Z,1520520762.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:42.425Z,1520520762.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:42.846Z,1520520762.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:43.223Z,1520520763.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:43.622Z,1520520763.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:44.022Z,1520520764.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:44.427Z,1520520764.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:44.824Z,1520520764.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:45.225Z,1520520765.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:45.648Z,1520520765.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:46.054Z,1520520766.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:46.427Z,1520520766.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:46.829Z,1520520766.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:47.228Z,1520520767.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:47.241Z,1520520767.241 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T14:52:47.241Z,1520520767.241 [NAL9602] No Fault, FailCount= 5
2018-03-08T14:52:47.580Z,1520520767.580 [NAL9602](INFO): Powering up NAL9602
2018-03-08T14:52:47.632Z,1520520767.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:48.035Z,1520520768.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:48.435Z,1520520768.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:48.807Z,1520520768.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:49.229Z,1520520769.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:49.640Z,1520520769.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:50.008Z,1520520770.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:50.433Z,1520520770.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:50.845Z,1520520770.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:51.247Z,1520520771.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:51.688Z,1520520771.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:52.040Z,1520520772.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:52.459Z,1520520772.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:52.818Z,1520520772.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:53.252Z,1520520773.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:53.623Z,1520520773.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:57.001Z,1520520777.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:57.146Z,1520520777.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:57.479Z,1520520777.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:57.868Z,1520520777.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:58.298Z,1520520778.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:58.630Z,1520520778.630 [NAL9602](INFO): NAL9602 initialized
2018-03-08T14:52:58.679Z,1520520778.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:59.102Z,1520520779.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:59.497Z,1520520779.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:52:59.903Z,1520520779.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:00.275Z,1520520780.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:00.683Z,1520520780.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:01.071Z,1520520781.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:01.478Z,1520520781.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:01.879Z,1520520781.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:02.285Z,1520520782.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:02.700Z,1520520782.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:03.096Z,1520520783.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:03.490Z,1520520783.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:03.871Z,1520520783.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:04.263Z,1520520784.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:04.671Z,1520520784.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:05.070Z,1520520785.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:05.497Z,1520520785.497 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:05.497Z,1520520785.497 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 143
2018-03-08T14:53:05.497Z,1520520785.497 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T14:53:05.499Z,1520520785.499 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:05.499Z,1520520785.499 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 143
2018-03-08T14:53:05.499Z,1520520785.499 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T14:53:05.501Z,1520520785.501 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:05.501Z,1520520785.501 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 143
2018-03-08T14:53:05.501Z,1520520785.501 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T14:53:05.513Z,1520520785.513 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T14:53:05.513Z,1520520785.513 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T14:53:05.513Z,1520520785.513 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T14:53:05.905Z,1520520785.905 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T14:53:05.905Z,1520520785.905 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 143
2018-03-08T14:53:05.906Z,1520520785.906 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T14:53:05.906Z,1520520785.906 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 143
2018-03-08T14:53:05.906Z,1520520785.906 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T14:53:05.906Z,1520520785.906 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 143
2018-03-08T14:53:06.275Z,1520520786.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T14:53:06.276Z,1520520786.276 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:53:06.276Z,1520520786.276 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:53:06.296Z,1520520786.296 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T14:53:06.297Z,1520520786.297 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:53:06.297Z,1520520786.297 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:53:06.298Z,1520520786.298 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T14:53:06.298Z,1520520786.298 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:53:06.298Z,1520520786.298 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:53:06.668Z,1520520786.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T14:53:06.669Z,1520520786.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:07.070Z,1520520787.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T14:53:07.071Z,1520520787.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:07.469Z,1520520787.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T14:53:07.470Z,1520520787.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:07.871Z,1520520787.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T14:53:07.873Z,1520520787.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:08.271Z,1520520788.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T14:53:08.272Z,1520520788.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:08.699Z,1520520788.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T14:53:08.700Z,1520520788.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:09.099Z,1520520789.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T14:53:09.100Z,1520520789.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:09.498Z,1520520789.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T14:53:09.499Z,1520520789.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:09.871Z,1520520789.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T14:53:09.872Z,1520520789.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:10.302Z,1520520790.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T14:53:10.303Z,1520520790.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:10.678Z,1520520790.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T14:53:10.679Z,1520520790.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:11.070Z,1520520791.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T14:53:11.071Z,1520520791.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:11.476Z,1520520791.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T14:53:11.477Z,1520520791.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:11.876Z,1520520791.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T14:53:11.877Z,1520520791.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:12.279Z,1520520792.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T14:53:12.280Z,1520520792.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:12.664Z,1520520792.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T14:53:12.665Z,1520520792.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:13.069Z,1520520793.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T14:53:13.070Z,1520520793.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:13.483Z,1520520793.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T14:53:13.484Z,1520520793.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:13.883Z,1520520793.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T14:53:13.884Z,1520520793.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:14.282Z,1520520794.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T14:53:14.283Z,1520520794.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:14.681Z,1520520794.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T14:53:14.682Z,1520520794.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:15.080Z,1520520795.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T14:53:15.085Z,1520520795.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:15.489Z,1520520795.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T14:53:15.490Z,1520520795.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:15.885Z,1520520795.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T14:53:15.886Z,1520520795.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:16.281Z,1520520796.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T14:53:16.282Z,1520520796.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:16.681Z,1520520796.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T14:53:16.682Z,1520520796.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:17.081Z,1520520797.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T14:53:17.082Z,1520520797.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:17.487Z,1520520797.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T14:53:17.493Z,1520520797.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:17.887Z,1520520797.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T14:53:17.888Z,1520520797.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:18.351Z,1520520798.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-08T14:53:18.352Z,1520520798.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:18.666Z,1520520798.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T14:53:18.667Z,1520520798.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:19.092Z,1520520799.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T14:53:19.097Z,1520520799.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:19.535Z,1520520799.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T14:53:19.536Z,1520520799.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:19.867Z,1520520799.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T14:53:19.868Z,1520520799.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:20.270Z,1520520800.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T14:53:20.271Z,1520520800.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:20.697Z,1520520800.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T14:53:20.698Z,1520520800.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:21.068Z,1520520801.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T14:53:21.069Z,1520520801.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:21.476Z,1520520801.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T14:53:21.477Z,1520520801.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:21.869Z,1520520801.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T14:53:21.870Z,1520520801.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:22.273Z,1520520802.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T14:53:22.274Z,1520520802.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:22.673Z,1520520802.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T14:53:22.674Z,1520520802.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:23.078Z,1520520803.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T14:53:23.079Z,1520520803.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:23.475Z,1520520803.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T14:53:23.477Z,1520520803.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:23.882Z,1520520803.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T14:53:23.883Z,1520520803.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:24.276Z,1520520804.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T14:53:24.277Z,1520520804.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:24.671Z,1520520804.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T14:53:24.672Z,1520520804.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:25.074Z,1520520805.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T14:53:25.075Z,1520520805.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:25.470Z,1520520805.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T14:53:25.470Z,1520520805.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:25.876Z,1520520805.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:26.270Z,1520520806.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:26.679Z,1520520806.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:27.080Z,1520520807.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:27.486Z,1520520807.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:27.875Z,1520520807.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:28.267Z,1520520808.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:28.671Z,1520520808.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:29.073Z,1520520809.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:29.480Z,1520520809.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:29.880Z,1520520809.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:30.279Z,1520520810.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:30.676Z,1520520810.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:31.070Z,1520520811.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:31.473Z,1520520811.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:31.871Z,1520520811.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:32.270Z,1520520812.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:32.689Z,1520520812.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:33.084Z,1520520813.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:33.490Z,1520520813.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:33.879Z,1520520813.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:34.271Z,1520520814.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:34.679Z,1520520814.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:35.073Z,1520520815.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:35.484Z,1520520815.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:35.883Z,1520520815.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:36.284Z,1520520816.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:36.675Z,1520520816.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:37.072Z,1520520817.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:37.475Z,1520520817.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:37.874Z,1520520817.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:38.278Z,1520520818.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:38.680Z,1520520818.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:39.084Z,1520520819.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:39.526Z,1520520819.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:39.885Z,1520520819.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:40.284Z,1520520820.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:40.683Z,1520520820.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:41.078Z,1520520821.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:41.483Z,1520520821.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:41.886Z,1520520821.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:42.282Z,1520520822.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:42.678Z,1520520822.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:43.084Z,1520520823.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:43.474Z,1520520823.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:43.878Z,1520520823.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:44.273Z,1520520824.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:44.722Z,1520520824.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:45.085Z,1520520825.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:45.484Z,1520520825.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:45.879Z,1520520825.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:46.291Z,1520520826.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:46.682Z,1520520826.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:47.086Z,1520520827.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:47.487Z,1520520827.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:47.888Z,1520520827.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:48.282Z,1520520828.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:48.682Z,1520520828.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:49.081Z,1520520829.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:49.485Z,1520520829.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:49.860Z,1520520829.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:50.287Z,1520520830.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:50.689Z,1520520830.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:51.085Z,1520520831.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:51.495Z,1520520831.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:51.867Z,1520520831.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:52.262Z,1520520832.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:52.686Z,1520520832.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:53.069Z,1520520833.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:53.494Z,1520520833.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:53.497Z,1520520833.497 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T14:53:53.497Z,1520520833.497 [Default:CheckIn:C.Wait] Stopped
2018-03-08T14:53:53.497Z,1520520833.497 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T14:53:53.497Z,1520520833.497 [Default:CheckIn:D] Running Loop=1
2018-03-08T14:53:53.902Z,1520520833.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:53.906Z,1520520833.906 [Default:CheckIn:D] Stopped
2018-03-08T14:53:53.906Z,1520520833.906 [Default:CheckIn:E] Running Loop=1
2018-03-08T14:53:57.002Z,1520520837.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:57.006Z,1520520837.006 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 428.151660 min 
2018-03-08T14:53:57.006Z,1520520837.006 [Default:CheckIn:E] Stopped
2018-03-08T14:53:57.006Z,1520520837.006 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T14:53:57.006Z,1520520837.006 [Default:CheckIn] Stopped
2018-03-08T14:53:57.006Z,1520520837.006 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T14:53:57.007Z,1520520837.007 [Default:CheckIn](INFO): Running loop #42
2018-03-08T14:53:57.007Z,1520520837.007 [Default:CheckIn] Running Loop=42
2018-03-08T14:53:57.007Z,1520520837.007 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T14:53:57.007Z,1520520837.007 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T14:53:57.146Z,1520520837.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:57.494Z,1520520837.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:57.870Z,1520520837.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:58.279Z,1520520838.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:58.684Z,1520520838.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:59.088Z,1520520839.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:59.480Z,1520520839.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:53:59.879Z,1520520839.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:00.278Z,1520520840.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:00.711Z,1520520840.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:01.079Z,1520520841.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:01.482Z,1520520841.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:01.910Z,1520520841.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:02.283Z,1520520842.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:02.724Z,1520520842.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:03.079Z,1520520843.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:03.481Z,1520520843.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:03.879Z,1520520843.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:04.283Z,1520520844.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:04.691Z,1520520844.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:05.083Z,1520520845.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:05.490Z,1520520845.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:05.877Z,1520520845.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:06.306Z,1520520846.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:06.690Z,1520520846.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:07.083Z,1520520847.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:07.489Z,1520520847.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:07.926Z,1520520847.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:08.295Z,1520520848.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:08.685Z,1520520848.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:09.087Z,1520520849.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:09.487Z,1520520849.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:09.878Z,1520520849.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:10.281Z,1520520850.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:10.685Z,1520520850.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:11.085Z,1520520851.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:11.489Z,1520520851.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:11.875Z,1520520851.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:12.284Z,1520520852.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:12.680Z,1520520852.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:13.087Z,1520520853.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:13.491Z,1520520853.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:13.892Z,1520520853.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:14.287Z,1520520854.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:14.686Z,1520520854.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:15.080Z,1520520855.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:15.481Z,1520520855.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:15.887Z,1520520855.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:16.311Z,1520520856.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:16.687Z,1520520856.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:17.093Z,1520520857.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:17.491Z,1520520857.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:17.890Z,1520520857.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:18.292Z,1520520858.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:18.687Z,1520520858.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:19.070Z,1520520859.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:19.499Z,1520520859.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:19.893Z,1520520859.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:20.302Z,1520520860.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:20.674Z,1520520860.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:21.067Z,1520520861.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:21.494Z,1520520861.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:21.904Z,1520520861.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:22.301Z,1520520862.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:22.710Z,1520520862.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:23.094Z,1520520863.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:23.489Z,1520520863.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:23.878Z,1520520863.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:24.272Z,1520520864.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:24.679Z,1520520864.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:25.082Z,1520520865.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:25.495Z,1520520865.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:25.880Z,1520520865.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:26.295Z,1520520866.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:26.678Z,1520520866.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:27.083Z,1520520867.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:27.478Z,1520520867.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:27.890Z,1520520867.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:28.277Z,1520520868.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:28.691Z,1520520868.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:29.089Z,1520520869.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:29.490Z,1520520869.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:29.887Z,1520520869.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:30.282Z,1520520870.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:30.733Z,1520520870.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:31.091Z,1520520871.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:31.504Z,1520520871.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:31.967Z,1520520871.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:32.291Z,1520520872.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:32.721Z,1520520872.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:33.079Z,1520520873.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:33.487Z,1520520873.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:33.920Z,1520520873.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:34.281Z,1520520874.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:34.689Z,1520520874.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:35.089Z,1520520875.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:35.482Z,1520520875.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:35.900Z,1520520875.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:36.289Z,1520520876.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:36.691Z,1520520876.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:37.092Z,1520520877.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:37.495Z,1520520877.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:37.880Z,1520520877.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:38.307Z,1520520878.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:38.707Z,1520520878.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:39.070Z,1520520879.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:39.490Z,1520520879.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:39.867Z,1520520879.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:40.292Z,1520520880.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:40.691Z,1520520880.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:41.096Z,1520520881.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:41.497Z,1520520881.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:41.871Z,1520520881.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:42.269Z,1520520882.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:42.693Z,1520520882.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:43.081Z,1520520883.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:43.504Z,1520520883.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:43.875Z,1520520883.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:44.303Z,1520520884.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:44.686Z,1520520884.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:45.082Z,1520520885.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:45.494Z,1520520885.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:45.879Z,1520520885.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:46.279Z,1520520886.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:46.690Z,1520520886.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:47.098Z,1520520887.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:47.486Z,1520520887.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:47.883Z,1520520887.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:48.286Z,1520520888.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:48.679Z,1520520888.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:49.081Z,1520520889.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:49.485Z,1520520889.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:49.898Z,1520520889.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:50.287Z,1520520890.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:50.684Z,1520520890.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:51.067Z,1520520891.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:51.479Z,1520520891.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:51.882Z,1520520891.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:52.286Z,1520520892.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:52.684Z,1520520892.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:53.089Z,1520520893.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:53.488Z,1520520893.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:53.883Z,1520520893.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:56.996Z,1520520896.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:57.131Z,1520520897.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:57.495Z,1520520897.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:57.894Z,1520520897.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:58.295Z,1520520898.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:58.684Z,1520520898.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:59.093Z,1520520899.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:59.462Z,1520520899.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:54:59.870Z,1520520899.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:00.262Z,1520520900.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:00.668Z,1520520900.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:01.096Z,1520520901.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:01.491Z,1520520901.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:01.861Z,1520520901.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:02.265Z,1520520902.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:02.666Z,1520520902.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:03.063Z,1520520903.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:03.472Z,1520520903.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:03.896Z,1520520903.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:04.264Z,1520520904.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:04.674Z,1520520904.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:05.066Z,1520520905.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:05.463Z,1520520905.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:05.867Z,1520520905.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:06.266Z,1520520906.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:06.665Z,1520520906.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:07.076Z,1520520907.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:07.495Z,1520520907.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:07.859Z,1520520907.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:08.271Z,1520520908.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:08.683Z,1520520908.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:09.075Z,1520520909.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:09.477Z,1520520909.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:09.886Z,1520520909.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:10.279Z,1520520910.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:10.673Z,1520520910.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:11.064Z,1520520911.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:11.471Z,1520520911.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:11.873Z,1520520911.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:12.274Z,1520520912.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:12.676Z,1520520912.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:13.079Z,1520520913.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:13.481Z,1520520913.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:13.864Z,1520520913.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:14.270Z,1520520914.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:14.675Z,1520520914.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:15.065Z,1520520915.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:15.487Z,1520520915.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:15.890Z,1520520915.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:16.282Z,1520520916.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:16.669Z,1520520916.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:17.074Z,1520520917.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:17.469Z,1520520917.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:17.873Z,1520520917.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:18.284Z,1520520918.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:18.673Z,1520520918.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:19.084Z,1520520919.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:19.481Z,1520520919.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:19.892Z,1520520919.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:20.267Z,1520520920.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:20.670Z,1520520920.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:21.071Z,1520520921.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:21.485Z,1520520921.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:21.931Z,1520520921.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:22.286Z,1520520922.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:22.668Z,1520520922.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:23.072Z,1520520923.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:23.463Z,1520520923.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:23.875Z,1520520923.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:24.282Z,1520520924.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:24.683Z,1520520924.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:25.087Z,1520520925.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:25.486Z,1520520925.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:25.873Z,1520520925.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:26.274Z,1520520926.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:26.684Z,1520520926.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:27.077Z,1520520927.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:27.482Z,1520520927.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:27.886Z,1520520927.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:28.280Z,1520520928.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:28.679Z,1520520928.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:29.070Z,1520520929.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:29.487Z,1520520929.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:29.886Z,1520520929.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:30.289Z,1520520930.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:30.695Z,1520520930.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:31.103Z,1520520931.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:31.495Z,1520520931.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:31.901Z,1520520931.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:32.268Z,1520520932.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:32.673Z,1520520932.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:33.095Z,1520520933.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:33.481Z,1520520933.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:33.881Z,1520520933.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:34.280Z,1520520934.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:34.671Z,1520520934.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:35.072Z,1520520935.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:35.468Z,1520520935.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:35.879Z,1520520935.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:36.273Z,1520520936.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:36.675Z,1520520936.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:37.087Z,1520520937.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:37.482Z,1520520937.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:37.870Z,1520520937.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:38.268Z,1520520938.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:38.674Z,1520520938.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:39.079Z,1520520939.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:39.483Z,1520520939.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:39.880Z,1520520939.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:40.281Z,1520520940.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:40.672Z,1520520940.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:41.095Z,1520520941.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:41.467Z,1520520941.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:41.874Z,1520520941.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:42.322Z,1520520942.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:42.686Z,1520520942.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:43.086Z,1520520943.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:43.483Z,1520520943.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:43.883Z,1520520943.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:44.282Z,1520520944.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:44.666Z,1520520944.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:45.056Z,1520520945.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:45.483Z,1520520945.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:45.885Z,1520520945.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:46.288Z,1520520946.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:46.686Z,1520520946.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:47.066Z,1520520947.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:47.463Z,1520520947.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:47.866Z,1520520947.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:48.265Z,1520520948.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:48.672Z,1520520948.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:49.096Z,1520520949.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:49.515Z,1520520949.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:49.901Z,1520520949.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:50.299Z,1520520950.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:50.667Z,1520520950.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:51.074Z,1520520951.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:51.469Z,1520520951.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:51.872Z,1520520951.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:52.272Z,1520520952.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:52.669Z,1520520952.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:53.069Z,1520520953.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:53.466Z,1520520953.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:53.866Z,1520520953.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:54.270Z,1520520954.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:58.205Z,1520520958.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:58.358Z,1520520958.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:58.705Z,1520520958.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:59.077Z,1520520959.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:59.486Z,1520520959.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:55:59.874Z,1520520959.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:00.278Z,1520520960.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:00.683Z,1520520960.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:01.084Z,1520520961.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:01.484Z,1520520961.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:01.882Z,1520520961.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:02.282Z,1520520962.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:02.675Z,1520520962.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:03.082Z,1520520963.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:03.484Z,1520520963.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:03.885Z,1520520963.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:04.295Z,1520520964.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:04.686Z,1520520964.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:05.098Z,1520520965.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:05.486Z,1520520965.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:05.885Z,1520520965.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:06.289Z,1520520966.289 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:06.290Z,1520520966.290 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 144
2018-03-08T14:56:06.290Z,1520520966.290 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T14:56:06.303Z,1520520966.303 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T14:56:06.690Z,1520520966.690 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:06.690Z,1520520966.690 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 144
2018-03-08T14:56:06.691Z,1520520966.691 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T14:56:06.692Z,1520520966.692 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:06.692Z,1520520966.692 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 144
2018-03-08T14:56:06.693Z,1520520966.693 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T14:56:06.704Z,1520520966.704 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T14:56:06.704Z,1520520966.704 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 144
2018-03-08T14:56:06.705Z,1520520966.705 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T14:56:06.705Z,1520520966.705 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T14:56:07.098Z,1520520967.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T14:56:07.098Z,1520520967.098 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:56:07.099Z,1520520967.099 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:56:07.110Z,1520520967.110 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T14:56:07.110Z,1520520967.110 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 144
2018-03-08T14:56:07.111Z,1520520967.111 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T14:56:07.111Z,1520520967.111 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 144
2018-03-08T14:56:07.502Z,1520520967.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T14:56:07.503Z,1520520967.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:07.503Z,1520520967.503 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T14:56:07.504Z,1520520967.504 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:56:07.504Z,1520520967.504 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:56:07.504Z,1520520967.504 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T14:56:07.505Z,1520520967.505 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:56:07.505Z,1520520967.505 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:56:07.876Z,1520520967.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T14:56:07.877Z,1520520967.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:08.277Z,1520520968.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T14:56:08.278Z,1520520968.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:08.672Z,1520520968.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T14:56:08.673Z,1520520968.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:09.074Z,1520520969.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T14:56:09.075Z,1520520969.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:09.485Z,1520520969.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T14:56:09.486Z,1520520969.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:09.898Z,1520520969.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T14:56:09.899Z,1520520969.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:10.301Z,1520520970.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T14:56:10.302Z,1520520970.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:10.685Z,1520520970.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T14:56:10.686Z,1520520970.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:11.083Z,1520520971.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T14:56:11.085Z,1520520971.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:11.487Z,1520520971.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T14:56:11.488Z,1520520971.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:11.889Z,1520520971.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T14:56:11.890Z,1520520971.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:12.298Z,1520520972.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T14:56:12.299Z,1520520972.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:12.690Z,1520520972.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T14:56:12.691Z,1520520972.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:13.103Z,1520520973.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T14:56:13.104Z,1520520973.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:13.502Z,1520520973.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T14:56:13.503Z,1520520973.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:13.874Z,1520520973.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T14:56:13.875Z,1520520973.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:14.279Z,1520520974.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T14:56:14.279Z,1520520974.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:14.675Z,1520520974.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T14:56:14.676Z,1520520974.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:15.071Z,1520520975.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T14:56:15.072Z,1520520975.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:15.476Z,1520520975.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T14:56:15.477Z,1520520975.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:15.875Z,1520520975.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T14:56:15.876Z,1520520975.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:16.288Z,1520520976.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T14:56:16.309Z,1520520976.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:16.682Z,1520520976.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T14:56:16.683Z,1520520976.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:17.076Z,1520520977.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T14:56:17.077Z,1520520977.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:17.469Z,1520520977.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T14:56:17.470Z,1520520977.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:17.872Z,1520520977.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T14:56:17.877Z,1520520977.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:18.282Z,1520520978.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T14:56:18.283Z,1520520978.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:18.690Z,1520520978.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T14:56:18.691Z,1520520978.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:19.099Z,1520520979.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T14:56:19.099Z,1520520979.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:19.496Z,1520520979.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T14:56:19.497Z,1520520979.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:19.878Z,1520520979.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T14:56:19.879Z,1520520979.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:20.287Z,1520520980.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T14:56:20.288Z,1520520980.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:20.696Z,1520520980.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T14:56:20.697Z,1520520980.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:21.086Z,1520520981.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T14:56:21.087Z,1520520981.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:21.490Z,1520520981.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T14:56:21.491Z,1520520981.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:21.891Z,1520520981.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T14:56:21.892Z,1520520981.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:22.287Z,1520520982.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T14:56:22.288Z,1520520982.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:22.686Z,1520520982.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T14:56:22.687Z,1520520982.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:23.095Z,1520520983.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T14:56:23.096Z,1520520983.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:23.463Z,1520520983.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T14:56:23.464Z,1520520983.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:23.867Z,1520520983.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T14:56:23.868Z,1520520983.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:24.296Z,1520520984.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T14:56:24.297Z,1520520984.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:24.672Z,1520520984.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T14:56:24.685Z,1520520984.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:25.102Z,1520520985.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T14:56:25.103Z,1520520985.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:25.494Z,1520520985.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T14:56:25.495Z,1520520985.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:25.866Z,1520520985.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T14:56:25.867Z,1520520985.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:26.295Z,1520520986.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:26.667Z,1520520986.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:27.067Z,1520520987.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:27.501Z,1520520987.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:27.902Z,1520520987.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:28.299Z,1520520988.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:28.675Z,1520520988.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:29.073Z,1520520989.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:29.478Z,1520520989.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:29.874Z,1520520989.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:30.274Z,1520520990.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:30.672Z,1520520990.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:31.084Z,1520520991.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:31.487Z,1520520991.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:31.871Z,1520520991.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:32.282Z,1520520992.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:32.679Z,1520520992.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:33.074Z,1520520993.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:33.491Z,1520520993.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:33.883Z,1520520993.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:34.283Z,1520520994.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:34.677Z,1520520994.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:35.075Z,1520520995.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:35.482Z,1520520995.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:35.879Z,1520520995.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:36.278Z,1520520996.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:36.683Z,1520520996.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:37.084Z,1520520997.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:37.483Z,1520520997.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:37.873Z,1520520997.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:38.274Z,1520520998.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:38.679Z,1520520998.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:39.082Z,1520520999.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:39.483Z,1520520999.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:39.884Z,1520520999.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:40.318Z,1520521000.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:40.678Z,1520521000.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:41.079Z,1520521001.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:41.474Z,1520521001.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:41.875Z,1520521001.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:42.277Z,1520521002.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:42.683Z,1520521002.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:43.086Z,1520521003.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:43.483Z,1520521003.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:43.872Z,1520521003.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:44.282Z,1520521004.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:44.690Z,1520521004.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:45.078Z,1520521005.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:45.524Z,1520521005.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:45.898Z,1520521005.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:46.291Z,1520521006.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:46.701Z,1520521006.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:47.080Z,1520521007.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:47.503Z,1520521007.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:47.887Z,1520521007.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:48.320Z,1520521008.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:48.687Z,1520521008.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:49.087Z,1520521009.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:49.489Z,1520521009.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:49.881Z,1520521009.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:50.282Z,1520521010.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:50.688Z,1520521010.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:51.075Z,1520521011.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:51.490Z,1520521011.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:51.889Z,1520521011.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:52.294Z,1520521012.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:52.675Z,1520521012.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:53.075Z,1520521013.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:53.480Z,1520521013.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:53.892Z,1520521013.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:54.287Z,1520521014.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:57.427Z,1520521017.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:57.570Z,1520521017.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:57.925Z,1520521017.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:58.297Z,1520521018.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:58.699Z,1520521018.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:59.105Z,1520521019.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:59.529Z,1520521019.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:56:59.904Z,1520521019.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:00.311Z,1520521020.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:00.692Z,1520521020.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:01.137Z,1520521021.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:01.494Z,1520521021.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:01.908Z,1520521021.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:02.302Z,1520521022.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:02.711Z,1520521022.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:03.114Z,1520521023.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:03.519Z,1520521023.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:03.902Z,1520521023.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:04.301Z,1520521024.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:04.705Z,1520521024.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:05.099Z,1520521025.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:05.519Z,1520521025.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:05.911Z,1520521025.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:06.311Z,1520521026.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:06.704Z,1520521026.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:07.107Z,1520521027.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:07.498Z,1520521027.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:07.899Z,1520521027.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:08.299Z,1520521028.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:08.712Z,1520521028.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:09.108Z,1520521029.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:09.507Z,1520521029.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:09.900Z,1520521029.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:10.301Z,1520521030.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:10.720Z,1520521030.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:11.102Z,1520521031.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:11.513Z,1520521031.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:11.915Z,1520521031.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:12.313Z,1520521032.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:12.688Z,1520521032.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:13.141Z,1520521033.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:13.546Z,1520521033.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:13.922Z,1520521033.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:14.298Z,1520521034.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:14.726Z,1520521034.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:15.096Z,1520521035.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:15.523Z,1520521035.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:15.902Z,1520521035.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:16.298Z,1520521036.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:16.696Z,1520521036.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:17.095Z,1520521037.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:17.519Z,1520521037.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:17.936Z,1520521037.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:18.328Z,1520521038.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:18.695Z,1520521038.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:19.096Z,1520521039.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:19.502Z,1520521039.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:19.897Z,1520521039.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:20.299Z,1520521040.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:20.705Z,1520521040.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:21.104Z,1520521041.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:21.505Z,1520521041.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:21.902Z,1520521041.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:22.306Z,1520521042.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:22.706Z,1520521042.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:23.102Z,1520521043.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:23.510Z,1520521043.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:23.904Z,1520521043.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:24.354Z,1520521044.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:24.704Z,1520521044.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:25.098Z,1520521045.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:25.502Z,1520521045.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:25.906Z,1520521045.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:26.306Z,1520521046.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:26.720Z,1520521046.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:27.108Z,1520521047.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:27.554Z,1520521047.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:27.907Z,1520521047.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:28.303Z,1520521048.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:28.706Z,1520521048.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:29.108Z,1520521049.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:29.513Z,1520521049.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:29.917Z,1520521049.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:30.317Z,1520521050.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:30.710Z,1520521050.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:31.104Z,1520521051.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:31.512Z,1520521051.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:31.896Z,1520521051.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:32.299Z,1520521052.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:32.729Z,1520521052.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:33.135Z,1520521053.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:33.511Z,1520521053.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:33.901Z,1520521053.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:34.302Z,1520521054.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:34.702Z,1520521054.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:35.103Z,1520521055.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:35.509Z,1520521055.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:35.914Z,1520521055.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:36.315Z,1520521056.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:36.700Z,1520521056.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:37.100Z,1520521057.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:37.510Z,1520521057.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:37.904Z,1520521057.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:38.306Z,1520521058.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:38.713Z,1520521058.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:39.115Z,1520521059.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:39.511Z,1520521059.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:39.902Z,1520521059.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:40.306Z,1520521060.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:40.707Z,1520521060.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:41.102Z,1520521061.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:41.512Z,1520521061.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:41.911Z,1520521061.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:42.313Z,1520521062.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:42.706Z,1520521062.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:43.105Z,1520521063.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:43.522Z,1520521063.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:43.900Z,1520521063.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:44.314Z,1520521064.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:44.714Z,1520521064.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:45.115Z,1520521065.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:45.545Z,1520521065.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:45.897Z,1520521065.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:46.302Z,1520521066.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:46.704Z,1520521066.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:47.104Z,1520521067.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:47.515Z,1520521067.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:47.911Z,1520521067.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:48.312Z,1520521068.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:48.707Z,1520521068.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:49.097Z,1520521069.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:49.507Z,1520521069.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:49.903Z,1520521069.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:50.307Z,1520521070.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:50.709Z,1520521070.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:51.113Z,1520521071.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:51.508Z,1520521071.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:51.901Z,1520521071.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:52.310Z,1520521072.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:52.706Z,1520521072.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:53.145Z,1520521073.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:53.519Z,1520521073.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:53.918Z,1520521073.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:54.320Z,1520521074.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:57.660Z,1520521077.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:57.816Z,1520521077.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:58.162Z,1520521078.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:58.558Z,1520521078.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:58.970Z,1520521078.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:59.344Z,1520521079.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:57:59.743Z,1520521079.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:00.127Z,1520521080.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:00.555Z,1520521080.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:00.953Z,1520521080.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:01.358Z,1520521081.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:01.728Z,1520521081.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:02.151Z,1520521082.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:02.536Z,1520521082.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:02.934Z,1520521082.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:03.333Z,1520521083.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:03.755Z,1520521083.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:04.137Z,1520521084.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:04.539Z,1520521084.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:04.935Z,1520521084.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:05.352Z,1520521085.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:05.736Z,1520521085.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:06.137Z,1520521086.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:06.540Z,1520521086.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:06.980Z,1520521086.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:07.374Z,1520521087.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:07.736Z,1520521087.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:08.140Z,1520521088.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:08.550Z,1520521088.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:08.934Z,1520521088.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:09.340Z,1520521089.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:09.745Z,1520521089.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:10.166Z,1520521090.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:10.570Z,1520521090.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:10.938Z,1520521090.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:11.337Z,1520521091.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:11.766Z,1520521091.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:12.165Z,1520521092.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:12.545Z,1520521092.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:12.950Z,1520521092.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:13.348Z,1520521093.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:13.739Z,1520521093.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:14.139Z,1520521094.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:14.539Z,1520521094.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:14.944Z,1520521094.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:15.346Z,1520521095.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:15.749Z,1520521095.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:16.145Z,1520521096.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:16.620Z,1520521096.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:16.939Z,1520521096.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:17.393Z,1520521097.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:17.787Z,1520521097.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:18.150Z,1520521098.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:18.550Z,1520521098.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:18.952Z,1520521098.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:19.396Z,1520521099.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:19.752Z,1520521099.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:20.145Z,1520521100.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:20.551Z,1520521100.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:20.947Z,1520521100.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:21.341Z,1520521101.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:21.755Z,1520521101.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:22.191Z,1520521102.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:22.562Z,1520521102.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:22.948Z,1520521102.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:23.327Z,1520521103.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:23.751Z,1520521103.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:24.151Z,1520521104.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:24.555Z,1520521104.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:24.958Z,1520521104.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:25.354Z,1520521105.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:25.766Z,1520521105.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:26.158Z,1520521106.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:26.550Z,1520521106.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:26.932Z,1520521106.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:27.336Z,1520521107.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:27.775Z,1520521107.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:28.180Z,1520521108.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:28.546Z,1520521108.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:28.936Z,1520521108.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:29.344Z,1520521109.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:29.741Z,1520521109.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:30.137Z,1520521110.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:30.544Z,1520521110.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:30.947Z,1520521110.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:31.382Z,1520521111.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:31.737Z,1520521111.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:32.136Z,1520521112.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:32.558Z,1520521112.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:32.955Z,1520521112.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:33.339Z,1520521113.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:33.748Z,1520521113.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:34.160Z,1520521114.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:34.554Z,1520521114.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:34.939Z,1520521114.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:35.340Z,1520521115.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:35.756Z,1520521115.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:36.150Z,1520521116.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:36.552Z,1520521116.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:36.942Z,1520521116.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:37.358Z,1520521117.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:37.747Z,1520521117.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:38.154Z,1520521118.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:38.529Z,1520521118.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:38.952Z,1520521118.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:39.328Z,1520521119.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:39.762Z,1520521119.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:40.149Z,1520521120.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:40.556Z,1520521120.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:40.954Z,1520521120.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:41.357Z,1520521121.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:41.730Z,1520521121.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:42.149Z,1520521122.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:42.559Z,1520521122.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:42.932Z,1520521122.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:43.358Z,1520521123.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:43.751Z,1520521123.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:44.150Z,1520521124.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:44.540Z,1520521124.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:44.943Z,1520521124.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:45.346Z,1520521125.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:45.750Z,1520521125.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:46.150Z,1520521126.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:46.544Z,1520521126.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:46.950Z,1520521126.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:47.346Z,1520521127.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:47.734Z,1520521127.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:48.139Z,1520521128.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:48.549Z,1520521128.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:48.947Z,1520521128.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:49.358Z,1520521129.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:49.739Z,1520521129.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:50.127Z,1520521130.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:50.543Z,1520521130.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:50.939Z,1520521130.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:51.331Z,1520521131.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:51.749Z,1520521131.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:52.150Z,1520521132.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:52.554Z,1520521132.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:52.942Z,1520521132.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:53.354Z,1520521133.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:53.752Z,1520521133.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:54.129Z,1520521134.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:54.554Z,1520521134.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:58.756Z,1520521138.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:58.759Z,1520521138.759 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T14:53:57.0Z
2018-03-08T14:58:58.759Z,1520521138.759 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T14:58:58.759Z,1520521138.759 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T14:58:58.902Z,1520521138.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:59.322Z,1520521139.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:58:59.678Z,1520521139.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:00.032Z,1520521140.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:00.429Z,1520521140.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:03.740Z,1520521143.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:03.898Z,1520521143.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:04.200Z,1520521144.200 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180308T074127/Courier0168.lzma
2018-03-08T14:59:04.235Z,1520521144.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:04.631Z,1520521144.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:04.991Z,1520521144.991 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0168.lzma.bak
2018-03-08T14:59:04.991Z,1520521144.991 [DataOverHttps](INFO): SBD MOMSN=7986676
2018-03-08T14:59:05.055Z,1520521145.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:05.630Z,1520521145.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:05.839Z,1520521145.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:08.973Z,1520521148.973 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:08.973Z,1520521148.973 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 145
2018-03-08T14:59:08.973Z,1520521148.973 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T14:59:08.975Z,1520521148.975 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:08.975Z,1520521148.975 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 145
2018-03-08T14:59:08.975Z,1520521148.975 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T14:59:08.977Z,1520521148.977 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:08.977Z,1520521148.977 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 145
2018-03-08T14:59:08.977Z,1520521148.977 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T14:59:08.989Z,1520521148.989 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T14:59:08.989Z,1520521148.989 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T14:59:08.989Z,1520521148.989 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T14:59:09.117Z,1520521149.117 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T14:59:09.117Z,1520521149.117 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 145
2018-03-08T14:59:09.118Z,1520521149.118 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T14:59:09.118Z,1520521149.118 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 145
2018-03-08T14:59:09.118Z,1520521149.118 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T14:59:09.118Z,1520521149.118 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 145
2018-03-08T14:59:09.449Z,1520521149.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T14:59:09.449Z,1520521149.449 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:59:09.449Z,1520521149.449 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:59:09.450Z,1520521149.450 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T14:59:09.450Z,1520521149.450 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:59:09.450Z,1520521149.450 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:59:09.451Z,1520521149.451 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T14:59:09.451Z,1520521149.451 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T14:59:09.451Z,1520521149.451 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T14:59:09.856Z,1520521149.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-03-08T14:59:09.857Z,1520521149.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:10.253Z,1520521150.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-03-08T14:59:10.253Z,1520521150.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:10.687Z,1520521150.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-03-08T14:59:10.687Z,1520521150.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:11.062Z,1520521151.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-03-08T14:59:11.063Z,1520521151.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:14.797Z,1520521154.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2018-03-08T14:59:14.798Z,1520521154.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:14.938Z,1520521154.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T14:59:14.939Z,1520521154.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:15.233Z,1520521155.233 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0169.lzma
2018-03-08T14:59:15.292Z,1520521155.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2018-03-08T14:59:15.293Z,1520521155.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:15.666Z,1520521155.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-03-08T14:59:15.666Z,1520521155.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:16.027Z,1520521156.027 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0169.lzma.bak
2018-03-08T14:59:16.027Z,1520521156.027 [DataOverHttps](INFO): SBD MOMSN=7986679
2018-03-08T14:59:16.098Z,1520521156.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2018-03-08T14:59:16.098Z,1520521156.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:16.687Z,1520521156.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-08T14:59:16.688Z,1520521156.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:16.691Z,1520521156.691 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T14:59:16.691Z,1520521156.691 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T14:59:16.691Z,1520521156.691 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T14:59:16.894Z,1520521156.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2018-03-08T14:59:16.895Z,1520521156.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:19.997Z,1520521159.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2018-03-08T14:59:19.998Z,1520521159.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:20.142Z,1520521160.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T14:59:20.143Z,1520521160.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:20.539Z,1520521160.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T14:59:20.539Z,1520521160.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:20.916Z,1520521160.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T14:59:20.917Z,1520521160.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:21.310Z,1520521161.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T14:59:21.311Z,1520521161.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:21.726Z,1520521161.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T14:59:21.727Z,1520521161.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:22.135Z,1520521162.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T14:59:22.154Z,1520521162.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:22.512Z,1520521162.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T14:59:22.513Z,1520521162.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:22.919Z,1520521162.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T14:59:22.920Z,1520521162.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:23.310Z,1520521163.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T14:59:23.311Z,1520521163.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:23.708Z,1520521163.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T14:59:23.709Z,1520521163.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:24.103Z,1520521164.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T14:59:24.104Z,1520521164.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:24.534Z,1520521164.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T14:59:24.535Z,1520521164.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:24.913Z,1520521164.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T14:59:24.913Z,1520521164.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:25.312Z,1520521165.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T14:59:25.313Z,1520521165.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:25.764Z,1520521165.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T14:59:25.765Z,1520521165.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:26.111Z,1520521166.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T14:59:26.113Z,1520521166.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:26.508Z,1520521166.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T14:59:26.509Z,1520521166.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:26.914Z,1520521166.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T14:59:26.915Z,1520521166.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:27.309Z,1520521167.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T14:59:27.310Z,1520521167.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:27.722Z,1520521167.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T14:59:27.723Z,1520521167.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:28.130Z,1520521168.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T14:59:28.131Z,1520521168.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:28.532Z,1520521168.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T14:59:28.535Z,1520521168.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:28.914Z,1520521168.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T14:59:28.915Z,1520521168.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:29.307Z,1520521169.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:29.722Z,1520521169.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:30.129Z,1520521170.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:30.528Z,1520521170.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:30.943Z,1520521170.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:31.330Z,1520521171.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:31.715Z,1520521171.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:32.099Z,1520521172.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:32.503Z,1520521172.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:32.930Z,1520521172.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:33.302Z,1520521173.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:33.708Z,1520521173.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:34.133Z,1520521174.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:34.519Z,1520521174.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:34.910Z,1520521174.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:35.322Z,1520521175.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:35.707Z,1520521175.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:36.106Z,1520521176.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:36.513Z,1520521176.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:36.921Z,1520521176.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:37.322Z,1520521177.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:37.710Z,1520521177.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:38.099Z,1520521178.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:38.502Z,1520521178.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:38.903Z,1520521178.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:39.297Z,1520521179.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:39.731Z,1520521179.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:40.121Z,1520521180.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:40.536Z,1520521180.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:40.911Z,1520521180.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:41.308Z,1520521181.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:41.714Z,1520521181.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:42.108Z,1520521182.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:42.518Z,1520521182.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:42.941Z,1520521182.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:43.321Z,1520521183.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:43.709Z,1520521183.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:44.120Z,1520521184.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:44.511Z,1520521184.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:44.905Z,1520521184.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:45.311Z,1520521185.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:45.718Z,1520521185.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:46.152Z,1520521186.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:46.534Z,1520521186.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:46.919Z,1520521186.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:47.300Z,1520521187.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:47.703Z,1520521187.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:48.108Z,1520521188.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:48.527Z,1520521188.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:48.936Z,1520521188.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:49.329Z,1520521189.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:49.703Z,1520521189.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:50.102Z,1520521190.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:50.511Z,1520521190.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:50.907Z,1520521190.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:51.306Z,1520521191.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:51.718Z,1520521191.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:52.115Z,1520521192.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:52.518Z,1520521192.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:52.911Z,1520521192.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:53.306Z,1520521193.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:53.712Z,1520521193.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:54.111Z,1520521194.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:54.516Z,1520521194.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:54.920Z,1520521194.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:55.320Z,1520521195.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:55.715Z,1520521195.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:56.111Z,1520521196.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:56.507Z,1520521196.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:56.912Z,1520521196.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:57.306Z,1520521197.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:57.712Z,1520521197.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:58.120Z,1520521198.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:58.521Z,1520521198.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:58.922Z,1520521198.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:59.303Z,1520521199.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T14:59:59.707Z,1520521199.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:00.113Z,1520521200.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:00.516Z,1520521200.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:00.915Z,1520521200.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:01.319Z,1520521201.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:01.712Z,1520521201.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:02.111Z,1520521202.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:02.503Z,1520521202.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:02.912Z,1520521202.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:03.312Z,1520521203.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:03.712Z,1520521203.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:04.117Z,1520521204.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:04.517Z,1520521204.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:04.921Z,1520521204.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:05.309Z,1520521205.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:05.708Z,1520521205.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:06.104Z,1520521206.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:06.521Z,1520521206.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:06.948Z,1520521206.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:07.327Z,1520521207.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:07.713Z,1520521207.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:08.118Z,1520521208.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:08.503Z,1520521208.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:08.910Z,1520521208.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:09.314Z,1520521209.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:09.717Z,1520521209.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:10.126Z,1520521210.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:10.527Z,1520521210.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:10.909Z,1520521210.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:11.312Z,1520521211.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:11.708Z,1520521211.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:12.129Z,1520521212.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:12.522Z,1520521212.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:12.924Z,1520521212.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:13.334Z,1520521213.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:13.710Z,1520521213.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:14.107Z,1520521214.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:14.517Z,1520521214.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:14.910Z,1520521214.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:15.311Z,1520521215.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:15.721Z,1520521215.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:16.121Z,1520521216.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:16.550Z,1520521216.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:16.909Z,1520521216.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:17.311Z,1520521217.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:21.073Z,1520521221.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:21.211Z,1520521221.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:21.562Z,1520521221.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:21.957Z,1520521221.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:22.362Z,1520521222.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:22.754Z,1520521222.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:23.157Z,1520521223.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:23.539Z,1520521223.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:23.954Z,1520521223.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:24.412Z,1520521224.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:24.748Z,1520521224.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:25.152Z,1520521225.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:25.552Z,1520521225.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:25.941Z,1520521225.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:26.342Z,1520521226.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:26.743Z,1520521226.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:27.143Z,1520521227.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:27.556Z,1520521227.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:27.956Z,1520521227.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:28.355Z,1520521228.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:28.749Z,1520521228.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:29.151Z,1520521229.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:29.549Z,1520521229.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:29.948Z,1520521229.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:30.352Z,1520521230.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:30.753Z,1520521230.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:31.163Z,1520521231.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:31.558Z,1520521231.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:31.927Z,1520521231.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:32.354Z,1520521232.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:32.755Z,1520521232.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:33.131Z,1520521233.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:33.575Z,1520521233.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:33.970Z,1520521233.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:34.343Z,1520521234.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:34.741Z,1520521234.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:35.139Z,1520521235.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:35.570Z,1520521235.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:35.944Z,1520521235.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:36.342Z,1520521236.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:36.743Z,1520521236.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:37.169Z,1520521237.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:37.572Z,1520521237.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:37.937Z,1520521237.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:38.343Z,1520521238.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:38.743Z,1520521238.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:39.147Z,1520521239.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:39.569Z,1520521239.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:39.972Z,1520521239.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:40.344Z,1520521240.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:40.743Z,1520521240.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:41.142Z,1520521241.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:41.539Z,1520521241.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:41.951Z,1520521241.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:42.343Z,1520521242.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:42.745Z,1520521242.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:43.169Z,1520521243.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:43.572Z,1520521243.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:43.936Z,1520521243.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:44.349Z,1520521244.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:44.748Z,1520521244.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:45.139Z,1520521245.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:45.575Z,1520521245.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:45.948Z,1520521245.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:46.348Z,1520521246.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:46.748Z,1520521246.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:47.148Z,1520521247.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:47.551Z,1520521247.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:47.948Z,1520521247.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:48.347Z,1520521248.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:48.749Z,1520521248.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:49.155Z,1520521249.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:49.559Z,1520521249.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:49.942Z,1520521249.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:50.346Z,1520521250.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:50.750Z,1520521250.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:51.147Z,1520521251.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:51.559Z,1520521251.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:52.006Z,1520521252.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:52.365Z,1520521252.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:52.749Z,1520521252.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:53.151Z,1520521253.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:53.549Z,1520521253.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:53.949Z,1520521253.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:54.358Z,1520521254.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:54.762Z,1520521254.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:55.199Z,1520521255.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:55.562Z,1520521255.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:55.931Z,1520521255.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:56.359Z,1520521256.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:56.764Z,1520521256.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:57.143Z,1520521257.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:57.563Z,1520521257.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:57.964Z,1520521257.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:58.345Z,1520521258.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:58.747Z,1520521258.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:59.139Z,1520521259.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:59.542Z,1520521259.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:00:59.946Z,1520521259.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:00.338Z,1520521260.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:00.752Z,1520521260.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:01.152Z,1520521261.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:01.555Z,1520521261.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:01.942Z,1520521261.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:02.346Z,1520521262.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:02.743Z,1520521262.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:03.147Z,1520521263.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:03.548Z,1520521263.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:03.952Z,1520521263.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:04.352Z,1520521264.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:04.750Z,1520521264.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:05.146Z,1520521265.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:05.566Z,1520521265.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:05.945Z,1520521265.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:06.348Z,1520521266.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:06.747Z,1520521266.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:07.152Z,1520521267.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:07.558Z,1520521267.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:07.937Z,1520521267.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:08.341Z,1520521268.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:08.743Z,1520521268.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:09.146Z,1520521269.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:09.560Z,1520521269.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:09.953Z,1520521269.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:10.356Z,1520521270.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:10.743Z,1520521270.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:11.149Z,1520521271.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:11.555Z,1520521271.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:11.949Z,1520521271.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:12.350Z,1520521272.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:12.767Z,1520521272.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:13.162Z,1520521273.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:13.579Z,1520521273.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:13.964Z,1520521273.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:14.355Z,1520521274.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:14.738Z,1520521274.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:15.162Z,1520521275.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:15.568Z,1520521275.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:15.969Z,1520521275.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:16.368Z,1520521276.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:16.745Z,1520521276.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:17.143Z,1520521277.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:17.547Z,1520521277.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:21.688Z,1520521281.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:21.791Z,1520521281.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:22.223Z,1520521282.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:22.623Z,1520521282.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:23.021Z,1520521283.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:23.422Z,1520521283.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:23.796Z,1520521283.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:24.219Z,1520521284.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:24.635Z,1520521284.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:25.008Z,1520521285.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:25.410Z,1520521285.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:25.813Z,1520521285.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:26.207Z,1520521286.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:26.613Z,1520521286.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:27.002Z,1520521287.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:27.413Z,1520521287.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:27.807Z,1520521287.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:28.212Z,1520521288.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:28.615Z,1520521288.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:28.997Z,1520521288.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:29.416Z,1520521289.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:29.820Z,1520521289.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:30.240Z,1520521290.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:30.600Z,1520521290.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:31.047Z,1520521291.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:31.424Z,1520521291.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:31.816Z,1520521291.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:32.217Z,1520521292.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:32.604Z,1520521292.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:33.010Z,1520521293.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:33.413Z,1520521293.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:33.810Z,1520521293.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:34.216Z,1520521294.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:34.606Z,1520521294.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:35.005Z,1520521295.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:35.409Z,1520521295.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:35.818Z,1520521295.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:36.214Z,1520521296.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:36.604Z,1520521296.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:37.005Z,1520521297.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:37.413Z,1520521297.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:37.813Z,1520521297.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:38.207Z,1520521298.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:38.604Z,1520521298.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:39.005Z,1520521299.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:39.413Z,1520521299.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:39.811Z,1520521299.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:40.211Z,1520521300.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:40.607Z,1520521300.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:41.006Z,1520521301.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:41.412Z,1520521301.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:41.813Z,1520521301.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:42.215Z,1520521302.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:42.608Z,1520521302.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:43.014Z,1520521303.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:43.410Z,1520521303.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:43.819Z,1520521303.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:44.219Z,1520521304.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:44.613Z,1520521304.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:45.013Z,1520521305.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:45.416Z,1520521305.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:45.816Z,1520521305.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:46.222Z,1520521306.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:46.611Z,1520521306.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:47.003Z,1520521307.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:47.404Z,1520521307.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:47.828Z,1520521307.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:48.201Z,1520521308.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:48.606Z,1520521308.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:48.000Z,1520521309.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:49.409Z,1520521309.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:49.808Z,1520521309.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:50.205Z,1520521310.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:50.605Z,1520521310.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:50.634Z,1520521310.634 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T15:01:51.003Z,1520521311.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:51.405Z,1520521311.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:51.809Z,1520521311.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:52.206Z,1520521312.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:52.604Z,1520521312.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:53.002Z,1520521313.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:53.412Z,1520521313.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:53.808Z,1520521313.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:54.215Z,1520521314.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:54.603Z,1520521314.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:55.003Z,1520521315.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:55.406Z,1520521315.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:55.811Z,1520521315.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:56.209Z,1520521316.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:56.603Z,1520521316.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:57.006Z,1520521317.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:57.409Z,1520521317.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:57.808Z,1520521317.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:58.211Z,1520521318.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:58.603Z,1520521318.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:58.995Z,1520521318.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:59.407Z,1520521319.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:01:59.807Z,1520521319.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:00.210Z,1520521320.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:00.604Z,1520521320.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:01.003Z,1520521321.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:01.407Z,1520521321.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:01.807Z,1520521321.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:02.209Z,1520521322.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:02.603Z,1520521322.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:03.005Z,1520521323.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:03.408Z,1520521323.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:03.815Z,1520521323.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:04.211Z,1520521324.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:04.603Z,1520521324.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:04.998Z,1520521324.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:05.407Z,1520521325.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:05.816Z,1520521325.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:06.204Z,1520521326.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:06.603Z,1520521326.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:06.000Z,1520521327.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:07.408Z,1520521327.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:07.808Z,1520521327.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:08.214Z,1520521328.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:08.606Z,1520521328.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:09.002Z,1520521329.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:09.408Z,1520521329.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:09.808Z,1520521329.808 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:09.809Z,1520521329.809 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 146
2018-03-08T15:02:09.809Z,1520521329.809 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T15:02:09.810Z,1520521329.810 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:09.810Z,1520521329.810 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 146
2018-03-08T15:02:09.811Z,1520521329.811 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T15:02:09.812Z,1520521329.812 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:09.813Z,1520521329.813 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 146
2018-03-08T15:02:09.813Z,1520521329.813 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T15:02:09.833Z,1520521329.833 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T15:02:09.833Z,1520521329.833 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T15:02:09.833Z,1520521329.833 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T15:02:10.241Z,1520521330.241 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T15:02:10.241Z,1520521330.241 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 146
2018-03-08T15:02:10.241Z,1520521330.241 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T15:02:10.242Z,1520521330.242 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 146
2018-03-08T15:02:10.242Z,1520521330.242 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T15:02:10.242Z,1520521330.242 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 146
2018-03-08T15:02:10.603Z,1520521330.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T15:02:10.603Z,1520521330.603 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:02:10.604Z,1520521330.604 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:02:10.604Z,1520521330.604 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T15:02:10.604Z,1520521330.604 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:02:10.605Z,1520521330.605 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:02:10.605Z,1520521330.605 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T15:02:10.606Z,1520521330.606 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:02:10.606Z,1520521330.606 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:02:11.005Z,1520521331.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T15:02:11.006Z,1520521331.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:11.408Z,1520521331.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T15:02:11.409Z,1520521331.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:11.814Z,1520521331.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T15:02:11.815Z,1520521331.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:12.208Z,1520521332.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T15:02:12.209Z,1520521332.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:12.600Z,1520521332.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T15:02:12.601Z,1520521332.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:13.010Z,1520521333.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T15:02:13.011Z,1520521333.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:13.408Z,1520521333.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T15:02:13.409Z,1520521333.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:13.818Z,1520521333.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T15:02:13.819Z,1520521333.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:14.218Z,1520521334.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T15:02:14.219Z,1520521334.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:14.604Z,1520521334.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T15:02:14.605Z,1520521334.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:15.030Z,1520521335.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T15:02:15.031Z,1520521335.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:15.413Z,1520521335.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T15:02:15.414Z,1520521335.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:15.817Z,1520521335.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T15:02:15.818Z,1520521335.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:16.212Z,1520521336.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T15:02:16.213Z,1520521336.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:16.614Z,1520521336.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T15:02:16.615Z,1520521336.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:17.009Z,1520521337.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T15:02:17.010Z,1520521337.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:17.414Z,1520521337.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T15:02:17.415Z,1520521337.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:17.816Z,1520521337.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T15:02:17.817Z,1520521337.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:20.923Z,1520521340.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2018-03-08T15:02:20.924Z,1520521340.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:21.062Z,1520521341.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T15:02:21.063Z,1520521341.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:21.419Z,1520521341.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T15:02:21.420Z,1520521341.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:21.818Z,1520521341.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T15:02:21.819Z,1520521341.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:22.217Z,1520521342.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T15:02:22.218Z,1520521342.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:22.631Z,1520521342.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T15:02:22.632Z,1520521342.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:23.028Z,1520521343.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T15:02:23.029Z,1520521343.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:23.424Z,1520521343.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T15:02:23.425Z,1520521343.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:23.812Z,1520521343.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T15:02:23.813Z,1520521343.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:24.214Z,1520521344.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T15:02:24.215Z,1520521344.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:24.618Z,1520521344.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T15:02:24.619Z,1520521344.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:25.021Z,1520521345.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T15:02:25.022Z,1520521345.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:25.427Z,1520521345.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T15:02:25.427Z,1520521345.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:25.850Z,1520521345.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T15:02:25.851Z,1520521345.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:26.235Z,1520521346.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T15:02:26.236Z,1520521346.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:26.619Z,1520521346.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T15:02:26.620Z,1520521346.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:27.015Z,1520521347.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T15:02:27.015Z,1520521347.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:27.431Z,1520521347.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T15:02:27.433Z,1520521347.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:27.832Z,1520521347.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T15:02:27.837Z,1520521347.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:28.229Z,1520521348.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T15:02:28.230Z,1520521348.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:28.603Z,1520521348.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T15:02:28.604Z,1520521348.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:29.007Z,1520521349.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T15:02:29.008Z,1520521349.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:29.430Z,1520521349.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T15:02:29.431Z,1520521349.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:29.834Z,1520521349.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:30.237Z,1520521350.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:30.603Z,1520521350.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:31.007Z,1520521351.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:31.431Z,1520521351.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:31.827Z,1520521351.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:32.237Z,1520521352.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:32.611Z,1520521352.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:33.008Z,1520521353.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:33.419Z,1520521353.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:33.864Z,1520521353.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:34.223Z,1520521354.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:34.610Z,1520521354.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:35.019Z,1520521355.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:35.423Z,1520521355.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:35.830Z,1520521355.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:36.230Z,1520521356.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:36.614Z,1520521356.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:37.010Z,1520521357.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:37.430Z,1520521357.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:37.823Z,1520521357.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:38.230Z,1520521358.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:38.609Z,1520521358.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:39.013Z,1520521359.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:39.459Z,1520521359.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:39.830Z,1520521359.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:40.259Z,1520521360.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:40.623Z,1520521360.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:41.028Z,1520521361.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:41.436Z,1520521361.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:41.878Z,1520521361.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:42.224Z,1520521362.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:42.615Z,1520521362.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:43.001Z,1520521363.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:43.428Z,1520521363.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:43.846Z,1520521363.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:44.227Z,1520521364.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:44.628Z,1520521364.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:45.005Z,1520521365.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:45.432Z,1520521365.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:45.837Z,1520521365.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:46.235Z,1520521366.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:46.608Z,1520521366.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:47.003Z,1520521367.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:47.436Z,1520521367.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:47.835Z,1520521367.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:48.234Z,1520521368.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:48.607Z,1520521368.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:49.009Z,1520521369.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:49.427Z,1520521369.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:49.819Z,1520521369.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:50.226Z,1520521370.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:50.615Z,1520521370.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:51.013Z,1520521371.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:51.426Z,1520521371.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:51.820Z,1520521371.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:52.219Z,1520521372.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:52.615Z,1520521372.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:53.015Z,1520521373.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:53.421Z,1520521373.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:53.826Z,1520521373.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:54.219Z,1520521374.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:54.614Z,1520521374.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:55.014Z,1520521375.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:55.419Z,1520521375.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:55.821Z,1520521375.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:56.225Z,1520521376.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:56.615Z,1520521376.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:57.014Z,1520521377.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:57.426Z,1520521377.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:57.820Z,1520521377.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:58.219Z,1520521378.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:58.615Z,1520521378.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:59.019Z,1520521379.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:59.419Z,1520521379.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:59.770Z,1520521379.770 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T15:02:59.770Z,1520521379.770 [NAL9602] Data Fault, FailCount= 1
2018-03-08T15:02:59.771Z,1520521379.771 [NAL9602](ERROR): Data Fault
2018-03-08T15:02:59.830Z,1520521379.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:02:59.851Z,1520521379.851 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T15:03:00.174Z,1520521380.174 [NAL9602](INFO): Powering down
2018-03-08T15:03:00.221Z,1520521380.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:00.609Z,1520521380.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:01.017Z,1520521381.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:01.030Z,1520521381.030 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T15:03:01.030Z,1520521381.030 [NAL9602] No Fault, FailCount= 1
2018-03-08T15:03:01.409Z,1520521381.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:01.809Z,1520521381.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:02.214Z,1520521382.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:02.615Z,1520521382.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:03.006Z,1520521383.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:03.414Z,1520521383.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:03.809Z,1520521383.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:04.211Z,1520521384.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:04.618Z,1520521384.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:05.018Z,1520521385.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:05.415Z,1520521385.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:05.822Z,1520521385.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:06.212Z,1520521386.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:06.614Z,1520521386.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:07.022Z,1520521387.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:07.411Z,1520521387.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:07.819Z,1520521387.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:08.215Z,1520521388.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:08.618Z,1520521388.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:09.009Z,1520521389.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:09.423Z,1520521389.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:09.795Z,1520521389.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:10.226Z,1520521390.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:10.626Z,1520521390.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:11.001Z,1520521391.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:11.405Z,1520521391.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:11.834Z,1520521391.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:12.202Z,1520521392.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:12.610Z,1520521392.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:13.014Z,1520521393.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:13.402Z,1520521393.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:13.805Z,1520521393.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:14.209Z,1520521394.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:14.602Z,1520521394.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:15.006Z,1520521395.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:15.406Z,1520521395.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:15.811Z,1520521395.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:16.203Z,1520521396.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:16.616Z,1520521396.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:17.002Z,1520521397.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:17.454Z,1520521397.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:17.804Z,1520521397.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:21.146Z,1520521401.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:21.287Z,1520521401.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:21.642Z,1520521401.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:22.069Z,1520521402.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:22.432Z,1520521402.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:22.832Z,1520521402.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:23.229Z,1520521403.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:23.631Z,1520521403.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:24.031Z,1520521404.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:24.431Z,1520521404.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:24.831Z,1520521404.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:25.232Z,1520521405.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:25.631Z,1520521405.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:26.027Z,1520521406.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:26.430Z,1520521406.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:26.827Z,1520521406.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:27.232Z,1520521407.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:27.631Z,1520521407.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:28.029Z,1520521408.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:28.429Z,1520521408.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:28.836Z,1520521408.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:29.230Z,1520521409.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:29.632Z,1520521409.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:30.031Z,1520521410.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:30.394Z,1520521410.394 [NAL9602](INFO): Powering up NAL9602
2018-03-08T15:03:30.439Z,1520521410.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:30.831Z,1520521410.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:31.231Z,1520521411.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:31.634Z,1520521411.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:32.035Z,1520521412.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:32.438Z,1520521412.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:32.830Z,1520521412.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:33.233Z,1520521413.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:33.638Z,1520521413.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:34.034Z,1520521414.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:34.433Z,1520521414.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:34.831Z,1520521414.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:35.230Z,1520521415.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:35.633Z,1520521415.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:36.030Z,1520521416.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:36.429Z,1520521416.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:36.835Z,1520521416.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:37.230Z,1520521417.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:37.633Z,1520521417.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:38.033Z,1520521418.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:38.438Z,1520521418.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:38.830Z,1520521418.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:39.233Z,1520521419.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:39.638Z,1520521419.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:40.026Z,1520521420.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:40.433Z,1520521420.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:40.829Z,1520521420.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:41.245Z,1520521421.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:41.594Z,1520521421.594 [NAL9602](INFO): NAL9602 initialized
2018-03-08T15:03:41.641Z,1520521421.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:42.044Z,1520521422.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:42.459Z,1520521422.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:42.847Z,1520521422.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:43.250Z,1520521423.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:43.624Z,1520521423.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:44.031Z,1520521424.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:44.458Z,1520521424.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:44.833Z,1520521424.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:45.251Z,1520521425.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:45.635Z,1520521425.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:46.035Z,1520521426.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:46.435Z,1520521426.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:46.833Z,1520521426.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:47.251Z,1520521427.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:47.640Z,1520521427.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:48.046Z,1520521428.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:48.436Z,1520521428.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:48.838Z,1520521428.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:49.240Z,1520521429.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:49.641Z,1520521429.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:50.046Z,1520521430.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:50.436Z,1520521430.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:50.835Z,1520521430.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:51.244Z,1520521431.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:51.644Z,1520521431.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:52.047Z,1520521432.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:52.431Z,1520521432.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:52.838Z,1520521432.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:53.242Z,1520521433.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:53.643Z,1520521433.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:54.050Z,1520521434.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:54.435Z,1520521434.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:54.831Z,1520521434.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:55.250Z,1520521435.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:55.643Z,1520521435.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:56.050Z,1520521436.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:56.436Z,1520521436.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:56.839Z,1520521436.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:57.244Z,1520521437.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:57.647Z,1520521437.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:58.044Z,1520521438.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:58.434Z,1520521438.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:58.842Z,1520521438.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:59.254Z,1520521439.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:03:59.647Z,1520521439.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:00.054Z,1520521440.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:00.435Z,1520521440.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:00.986Z,1520521440.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:01.246Z,1520521441.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:01.649Z,1520521441.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:02.044Z,1520521442.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:02.439Z,1520521442.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:02.840Z,1520521442.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:03.245Z,1520521443.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:03.646Z,1520521443.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:04.047Z,1520521444.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:04.437Z,1520521444.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:04.835Z,1520521444.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:05.247Z,1520521445.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:05.647Z,1520521445.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:06.045Z,1520521446.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:06.435Z,1520521446.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:06.836Z,1520521446.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:07.245Z,1520521447.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:07.652Z,1520521447.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:08.043Z,1520521448.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:08.439Z,1520521448.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:08.847Z,1520521448.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:09.243Z,1520521449.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:09.652Z,1520521449.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:10.049Z,1520521450.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:10.422Z,1520521450.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:10.850Z,1520521450.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:11.258Z,1520521451.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:11.652Z,1520521451.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:12.059Z,1520521452.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:12.438Z,1520521452.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:12.825Z,1520521452.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:13.259Z,1520521453.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:13.640Z,1520521453.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:14.043Z,1520521454.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:14.436Z,1520521454.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:14.838Z,1520521454.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:15.236Z,1520521455.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:15.640Z,1520521455.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:16.037Z,1520521456.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:16.434Z,1520521456.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:16.835Z,1520521456.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:17.237Z,1520521457.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:17.240Z,1520521457.240 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T15:04:17.240Z,1520521457.240 [Default:CheckIn:C.Wait] Stopped
2018-03-08T15:04:17.240Z,1520521457.240 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T15:04:17.240Z,1520521457.240 [Default:CheckIn:D] Running Loop=1
2018-03-08T15:04:17.640Z,1520521457.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:17.643Z,1520521457.643 [Default:CheckIn:D] Stopped
2018-03-08T15:04:17.643Z,1520521457.643 [Default:CheckIn:E] Running Loop=1
2018-03-08T15:04:18.036Z,1520521458.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:18.039Z,1520521458.039 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 438.547298 min 
2018-03-08T15:04:18.040Z,1520521458.040 [Default:CheckIn:E] Stopped
2018-03-08T15:04:18.040Z,1520521458.040 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T15:04:18.040Z,1520521458.040 [Default:CheckIn] Stopped
2018-03-08T15:04:18.040Z,1520521458.040 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T15:04:18.040Z,1520521458.040 [Default:CheckIn](INFO): Running loop #43
2018-03-08T15:04:18.040Z,1520521458.040 [Default:CheckIn] Running Loop=43
2018-03-08T15:04:18.041Z,1520521458.041 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T15:04:18.041Z,1520521458.041 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T15:04:21.226Z,1520521461.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:21.354Z,1520521461.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:21.726Z,1520521461.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:22.130Z,1520521462.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:22.524Z,1520521462.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:22.895Z,1520521462.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:23.298Z,1520521463.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:23.699Z,1520521463.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:24.105Z,1520521464.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:24.505Z,1520521464.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:24.903Z,1520521464.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:25.304Z,1520521465.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:25.711Z,1520521465.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:26.092Z,1520521466.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:26.506Z,1520521466.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:26.902Z,1520521466.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:27.317Z,1520521467.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:27.718Z,1520521467.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:28.112Z,1520521468.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:28.496Z,1520521468.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:28.910Z,1520521468.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:29.303Z,1520521469.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:29.703Z,1520521469.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:30.102Z,1520521470.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:30.517Z,1520521470.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:30.909Z,1520521470.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:31.308Z,1520521471.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:31.706Z,1520521471.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:32.099Z,1520521472.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:32.500Z,1520521472.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:32.909Z,1520521472.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:33.323Z,1520521473.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:33.720Z,1520521473.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:34.123Z,1520521474.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:34.510Z,1520521474.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:34.903Z,1520521474.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:35.303Z,1520521475.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:35.704Z,1520521475.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:36.106Z,1520521476.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:36.521Z,1520521476.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:36.914Z,1520521476.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:37.312Z,1520521477.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:37.706Z,1520521477.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:38.091Z,1520521478.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:38.508Z,1520521478.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:38.908Z,1520521478.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:39.310Z,1520521479.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:39.714Z,1520521479.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:40.116Z,1520521480.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:40.510Z,1520521480.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:40.905Z,1520521480.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:41.307Z,1520521481.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:41.711Z,1520521481.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:42.105Z,1520521482.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:42.519Z,1520521482.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:42.913Z,1520521482.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:43.317Z,1520521483.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:43.706Z,1520521483.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:44.099Z,1520521484.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:44.509Z,1520521484.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:44.916Z,1520521484.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:45.318Z,1520521485.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:45.716Z,1520521485.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:46.117Z,1520521486.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:46.514Z,1520521486.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:46.909Z,1520521486.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:47.310Z,1520521487.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:47.710Z,1520521487.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:48.114Z,1520521488.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:48.515Z,1520521488.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:48.919Z,1520521488.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:49.321Z,1520521489.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:49.717Z,1520521489.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:50.088Z,1520521490.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:50.511Z,1520521490.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:50.894Z,1520521490.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:51.323Z,1520521491.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:51.726Z,1520521491.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:52.126Z,1520521492.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:52.492Z,1520521492.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:52.899Z,1520521492.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:53.299Z,1520521493.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:53.695Z,1520521493.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:54.099Z,1520521494.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:54.529Z,1520521494.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:54.900Z,1520521494.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:55.301Z,1520521495.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:55.698Z,1520521495.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:56.096Z,1520521496.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:56.499Z,1520521496.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:56.898Z,1520521496.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:57.300Z,1520521497.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:57.707Z,1520521497.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:58.104Z,1520521498.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:58.498Z,1520521498.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:58.902Z,1520521498.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:59.297Z,1520521499.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:04:59.699Z,1520521499.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:00.101Z,1520521500.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:00.504Z,1520521500.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:00.906Z,1520521500.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:01.304Z,1520521501.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:01.698Z,1520521501.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:02.095Z,1520521502.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:02.512Z,1520521502.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:02.902Z,1520521502.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:03.306Z,1520521503.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:03.704Z,1520521503.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:04.114Z,1520521504.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:04.495Z,1520521504.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:04.902Z,1520521504.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:05.298Z,1520521505.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:05.699Z,1520521505.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:06.106Z,1520521506.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:06.514Z,1520521506.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:06.905Z,1520521506.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:07.316Z,1520521507.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:07.699Z,1520521507.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:08.097Z,1520521508.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:08.500Z,1520521508.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:08.902Z,1520521508.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:09.317Z,1520521509.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:09.715Z,1520521509.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:10.122Z,1520521510.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:10.516Z,1520521510.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:10.910Z,1520521510.910 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:10.911Z,1520521510.911 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 147
2018-03-08T15:05:10.911Z,1520521510.911 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T15:05:10.913Z,1520521510.913 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:10.913Z,1520521510.913 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 147
2018-03-08T15:05:10.913Z,1520521510.913 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T15:05:10.914Z,1520521510.914 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:10.914Z,1520521510.914 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 147
2018-03-08T15:05:10.915Z,1520521510.915 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T15:05:10.926Z,1520521510.926 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T15:05:10.926Z,1520521510.926 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T15:05:10.927Z,1520521510.927 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T15:05:11.324Z,1520521511.324 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T15:05:11.324Z,1520521511.324 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 147
2018-03-08T15:05:11.325Z,1520521511.325 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T15:05:11.325Z,1520521511.325 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 147
2018-03-08T15:05:11.326Z,1520521511.326 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T15:05:11.326Z,1520521511.326 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 147
2018-03-08T15:05:11.709Z,1520521511.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T15:05:11.709Z,1520521511.709 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:05:11.710Z,1520521511.710 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:05:11.710Z,1520521511.710 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T15:05:11.711Z,1520521511.711 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:05:11.711Z,1520521511.711 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:05:11.712Z,1520521511.712 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T15:05:11.713Z,1520521511.713 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:05:11.714Z,1520521511.714 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:05:12.117Z,1520521512.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T15:05:12.118Z,1520521512.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:12.521Z,1520521512.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T15:05:12.522Z,1520521512.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:12.911Z,1520521512.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T15:05:12.911Z,1520521512.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:13.321Z,1520521513.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T15:05:13.322Z,1520521513.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:13.720Z,1520521513.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T15:05:13.721Z,1520521513.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:14.094Z,1520521514.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T15:05:14.095Z,1520521514.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:14.495Z,1520521514.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T15:05:14.496Z,1520521514.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:14.899Z,1520521514.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T15:05:14.900Z,1520521514.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:15.300Z,1520521515.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T15:05:15.302Z,1520521515.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:15.711Z,1520521515.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T15:05:15.712Z,1520521515.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:16.108Z,1520521516.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T15:05:16.109Z,1520521516.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:16.509Z,1520521516.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T15:05:16.510Z,1520521516.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:16.904Z,1520521516.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T15:05:16.906Z,1520521516.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:17.303Z,1520521517.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T15:05:17.303Z,1520521517.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:17.698Z,1520521517.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T15:05:17.699Z,1520521517.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:18.098Z,1520521518.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T15:05:18.099Z,1520521518.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:21.210Z,1520521521.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-03-08T15:05:21.211Z,1520521521.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:21.343Z,1520521521.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T15:05:21.344Z,1520521521.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:21.742Z,1520521521.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T15:05:21.742Z,1520521521.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:22.115Z,1520521522.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T15:05:22.116Z,1520521522.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:22.511Z,1520521522.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T15:05:22.512Z,1520521522.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:22.905Z,1520521522.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T15:05:22.906Z,1520521522.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:23.322Z,1520521523.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T15:05:23.323Z,1520521523.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:23.745Z,1520521523.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T15:05:23.746Z,1520521523.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:24.124Z,1520521524.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T15:05:24.126Z,1520521524.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:24.512Z,1520521524.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T15:05:24.514Z,1520521524.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:24.913Z,1520521524.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T15:05:24.914Z,1520521524.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:25.314Z,1520521525.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T15:05:25.315Z,1520521525.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:25.710Z,1520521525.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T15:05:25.711Z,1520521525.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:26.110Z,1520521526.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T15:05:26.111Z,1520521526.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:26.523Z,1520521526.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T15:05:26.524Z,1520521526.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:26.948Z,1520521526.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T15:05:26.949Z,1520521526.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:27.316Z,1520521527.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T15:05:27.317Z,1520521527.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:27.708Z,1520521527.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T15:05:27.709Z,1520521527.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:28.120Z,1520521528.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T15:05:28.121Z,1520521528.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:28.530Z,1520521528.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T15:05:28.532Z,1520521528.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:28.913Z,1520521528.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T15:05:28.914Z,1520521528.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:29.331Z,1520521529.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T15:05:29.332Z,1520521529.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:29.726Z,1520521529.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T15:05:29.727Z,1520521529.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:30.157Z,1520521530.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T15:05:30.158Z,1520521530.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:30.516Z,1520521530.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T15:05:30.517Z,1520521530.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:30.917Z,1520521530.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:31.327Z,1520521531.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:31.712Z,1520521531.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:32.115Z,1520521532.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:32.526Z,1520521532.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:32.929Z,1520521532.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:33.350Z,1520521533.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:33.715Z,1520521533.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:34.119Z,1520521534.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:34.518Z,1520521534.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:34.907Z,1520521534.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:35.334Z,1520521535.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:35.730Z,1520521535.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:36.123Z,1520521536.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:36.523Z,1520521536.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:36.918Z,1520521536.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:37.323Z,1520521537.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:37.719Z,1520521537.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:38.118Z,1520521538.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:38.517Z,1520521538.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:38.929Z,1520521538.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:39.321Z,1520521539.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:39.730Z,1520521539.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:40.113Z,1520521540.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:40.522Z,1520521540.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:40.916Z,1520521540.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:41.321Z,1520521541.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:41.733Z,1520521541.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:42.130Z,1520521542.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:42.518Z,1520521542.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:42.919Z,1520521542.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:43.307Z,1520521543.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:43.710Z,1520521543.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:44.116Z,1520521544.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:44.517Z,1520521544.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:44.929Z,1520521544.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:45.328Z,1520521545.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:45.716Z,1520521545.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:46.109Z,1520521546.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:46.512Z,1520521546.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:46.907Z,1520521546.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:47.330Z,1520521547.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:47.749Z,1520521547.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:48.116Z,1520521548.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:48.509Z,1520521548.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:48.916Z,1520521548.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:49.308Z,1520521549.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:49.714Z,1520521549.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:50.112Z,1520521550.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:50.521Z,1520521550.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:50.932Z,1520521550.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:51.322Z,1520521551.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:51.707Z,1520521551.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:52.122Z,1520521552.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:52.508Z,1520521552.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:52.907Z,1520521552.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:53.326Z,1520521553.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:53.724Z,1520521553.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:54.152Z,1520521554.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:54.513Z,1520521554.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:54.912Z,1520521554.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:55.312Z,1520521555.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:55.710Z,1520521555.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:56.107Z,1520521556.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:56.561Z,1520521556.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:56.926Z,1520521556.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:57.349Z,1520521557.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:57.719Z,1520521557.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:58.171Z,1520521558.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:58.522Z,1520521558.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:58.918Z,1520521558.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:59.329Z,1520521559.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:05:59.728Z,1520521559.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:00.135Z,1520521560.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:00.519Z,1520521560.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:00.917Z,1520521560.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:01.322Z,1520521561.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:01.733Z,1520521561.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:02.118Z,1520521562.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:02.525Z,1520521562.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:02.929Z,1520521562.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:03.325Z,1520521563.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:03.718Z,1520521563.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:04.122Z,1520521564.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:04.519Z,1520521564.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:04.925Z,1520521564.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:05.324Z,1520521565.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:05.734Z,1520521565.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:06.126Z,1520521566.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:06.498Z,1520521566.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:06.903Z,1520521566.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:07.302Z,1520521567.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:07.709Z,1520521567.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:08.118Z,1520521568.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:08.513Z,1520521568.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:08.912Z,1520521568.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:09.309Z,1520521569.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:09.714Z,1520521569.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:10.108Z,1520521570.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:10.514Z,1520521570.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:10.911Z,1520521570.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:11.318Z,1520521571.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:11.712Z,1520521571.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:12.126Z,1520521572.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:12.511Z,1520521572.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:12.917Z,1520521572.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:13.311Z,1520521573.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:13.710Z,1520521573.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:14.105Z,1520521574.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:14.522Z,1520521574.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:14.934Z,1520521574.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:15.326Z,1520521575.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:15.723Z,1520521575.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:16.118Z,1520521576.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:16.512Z,1520521576.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:16.924Z,1520521576.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:17.326Z,1520521577.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:17.724Z,1520521577.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:18.149Z,1520521578.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:21.210Z,1520521581.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:21.349Z,1520521581.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:21.705Z,1520521581.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:22.104Z,1520521582.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:22.488Z,1520521582.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:22.880Z,1520521582.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:23.278Z,1520521583.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:23.680Z,1520521583.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:24.077Z,1520521584.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:24.484Z,1520521584.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:24.880Z,1520521584.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:25.283Z,1520521585.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:25.686Z,1520521585.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:26.076Z,1520521586.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:26.480Z,1520521586.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:26.879Z,1520521586.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:27.284Z,1520521587.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:27.685Z,1520521587.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:28.084Z,1520521588.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:28.478Z,1520521588.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:28.878Z,1520521588.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:29.279Z,1520521589.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:29.676Z,1520521589.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:30.086Z,1520521590.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:30.485Z,1520521590.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:30.883Z,1520521590.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:31.284Z,1520521591.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:31.679Z,1520521591.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:32.075Z,1520521592.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:32.479Z,1520521592.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:32.881Z,1520521592.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:33.290Z,1520521593.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:33.694Z,1520521593.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:34.087Z,1520521594.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:34.478Z,1520521594.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:34.879Z,1520521594.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:35.290Z,1520521595.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:35.683Z,1520521595.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:36.079Z,1520521596.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:36.494Z,1520521596.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:36.895Z,1520521596.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:37.292Z,1520521597.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:37.678Z,1520521597.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:38.082Z,1520521598.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:38.483Z,1520521598.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:38.885Z,1520521598.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:39.293Z,1520521599.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:39.692Z,1520521599.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:40.103Z,1520521600.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:40.486Z,1520521600.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:40.886Z,1520521600.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:41.286Z,1520521601.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:41.686Z,1520521601.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:42.091Z,1520521602.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:42.494Z,1520521602.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:42.905Z,1520521602.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:43.303Z,1520521603.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:43.687Z,1520521603.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:44.085Z,1520521604.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:44.486Z,1520521604.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:44.893Z,1520521604.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:45.293Z,1520521605.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:45.706Z,1520521605.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:46.096Z,1520521606.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:46.491Z,1520521606.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:46.899Z,1520521606.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:47.293Z,1520521607.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:47.692Z,1520521607.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:48.091Z,1520521608.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:48.499Z,1520521608.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:48.886Z,1520521608.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:49.299Z,1520521609.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:49.685Z,1520521609.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:50.070Z,1520521610.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:50.494Z,1520521610.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:50.877Z,1520521610.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:51.284Z,1520521611.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:51.706Z,1520521611.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:52.107Z,1520521612.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:52.475Z,1520521612.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:52.882Z,1520521612.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:53.278Z,1520521613.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:53.687Z,1520521613.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:54.077Z,1520521614.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:54.484Z,1520521614.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:54.883Z,1520521614.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:55.283Z,1520521615.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:55.678Z,1520521615.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:56.082Z,1520521616.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:56.484Z,1520521616.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:56.882Z,1520521616.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:57.288Z,1520521617.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:57.688Z,1520521617.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:58.087Z,1520521618.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:58.487Z,1520521618.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:58.881Z,1520521618.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:59.283Z,1520521619.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:06:59.687Z,1520521619.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:00.082Z,1520521620.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:00.488Z,1520521620.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:00.883Z,1520521620.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:01.288Z,1520521621.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:01.683Z,1520521621.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:02.077Z,1520521622.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:02.487Z,1520521622.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:02.886Z,1520521622.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:03.284Z,1520521623.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:03.691Z,1520521623.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:04.090Z,1520521624.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:04.477Z,1520521624.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:04.886Z,1520521624.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:05.284Z,1520521625.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:05.687Z,1520521625.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:06.083Z,1520521626.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:06.498Z,1520521626.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:06.885Z,1520521626.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:07.288Z,1520521627.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:07.687Z,1520521627.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:08.079Z,1520521628.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:08.480Z,1520521628.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:08.892Z,1520521628.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:09.289Z,1520521629.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:09.692Z,1520521629.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:10.094Z,1520521630.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:10.483Z,1520521630.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:10.883Z,1520521630.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:11.287Z,1520521631.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:11.689Z,1520521631.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:12.089Z,1520521632.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:12.502Z,1520521632.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:12.898Z,1520521632.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:13.298Z,1520521633.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:13.695Z,1520521633.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:14.071Z,1520521634.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:14.495Z,1520521634.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:14.902Z,1520521634.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:15.297Z,1520521635.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:15.695Z,1520521635.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:16.097Z,1520521636.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:16.475Z,1520521636.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:16.874Z,1520521636.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:17.302Z,1520521637.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:17.681Z,1520521637.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:18.085Z,1520521638.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:18.485Z,1520521638.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:21.581Z,1520521641.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:21.721Z,1520521641.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:22.091Z,1520521642.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:22.473Z,1520521642.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:22.874Z,1520521642.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:23.278Z,1520521643.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:23.693Z,1520521643.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:24.077Z,1520521644.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:24.475Z,1520521644.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:24.876Z,1520521644.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:25.267Z,1520521645.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:25.678Z,1520521645.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:26.082Z,1520521646.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:26.483Z,1520521646.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:26.887Z,1520521646.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:27.286Z,1520521647.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:27.678Z,1520521647.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:28.077Z,1520521648.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:28.479Z,1520521648.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:28.877Z,1520521648.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:29.286Z,1520521649.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:29.681Z,1520521649.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:30.083Z,1520521650.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:30.477Z,1520521650.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:30.879Z,1520521650.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:31.278Z,1520521651.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:31.674Z,1520521651.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:32.085Z,1520521652.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:32.483Z,1520521652.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:32.887Z,1520521652.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:33.283Z,1520521653.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:33.681Z,1520521653.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:34.078Z,1520521654.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:34.462Z,1520521654.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:34.853Z,1520521654.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:35.291Z,1520521655.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:35.691Z,1520521655.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:36.085Z,1520521656.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:36.485Z,1520521656.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:36.857Z,1520521656.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:37.258Z,1520521657.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:37.683Z,1520521657.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:38.089Z,1520521658.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:38.480Z,1520521658.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:38.887Z,1520521658.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:39.283Z,1520521659.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:39.682Z,1520521659.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:40.063Z,1520521660.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:40.462Z,1520521660.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:40.870Z,1520521660.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:41.293Z,1520521661.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:41.698Z,1520521661.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:42.072Z,1520521662.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:42.465Z,1520521662.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:42.878Z,1520521662.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:43.264Z,1520521663.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:43.667Z,1520521663.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:44.078Z,1520521664.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:44.487Z,1520521664.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:44.883Z,1520521664.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:45.281Z,1520521665.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:45.673Z,1520521665.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:46.074Z,1520521666.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:46.475Z,1520521666.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:46.878Z,1520521666.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:47.279Z,1520521667.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:47.686Z,1520521667.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:48.080Z,1520521668.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:48.467Z,1520521668.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:48.866Z,1520521668.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:49.262Z,1520521669.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:49.675Z,1520521669.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:50.067Z,1520521670.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:50.469Z,1520521670.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:50.872Z,1520521670.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:51.273Z,1520521671.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:51.671Z,1520521671.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:52.065Z,1520521672.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:52.469Z,1520521672.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:52.867Z,1520521672.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:53.280Z,1520521673.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:53.676Z,1520521673.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:54.071Z,1520521674.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:54.470Z,1520521674.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:54.869Z,1520521674.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:55.267Z,1520521675.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:55.668Z,1520521675.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:56.082Z,1520521676.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:56.482Z,1520521676.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:56.886Z,1520521676.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:57.278Z,1520521677.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:57.671Z,1520521677.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:58.059Z,1520521678.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:58.529Z,1520521678.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:58.861Z,1520521678.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:59.273Z,1520521679.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:07:59.668Z,1520521679.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:00.072Z,1520521680.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:00.499Z,1520521680.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:00.874Z,1520521680.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:01.268Z,1520521681.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:01.660Z,1520521681.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:02.063Z,1520521682.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:02.491Z,1520521682.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:02.891Z,1520521682.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:03.283Z,1520521683.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:03.679Z,1520521683.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:04.083Z,1520521684.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:04.462Z,1520521684.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:04.891Z,1520521684.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:05.284Z,1520521685.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:05.686Z,1520521685.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:06.084Z,1520521686.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:06.463Z,1520521686.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:06.865Z,1520521686.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:07.270Z,1520521687.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:07.668Z,1520521687.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:08.066Z,1520521688.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:08.472Z,1520521688.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:08.879Z,1520521688.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:09.275Z,1520521689.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:09.674Z,1520521689.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:10.070Z,1520521690.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:10.474Z,1520521690.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:10.874Z,1520521690.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:11.282Z,1520521691.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:11.676Z,1520521691.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:12.075Z,1520521692.075 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:12.075Z,1520521692.075 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 148
2018-03-08T15:08:12.075Z,1520521692.075 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T15:08:12.077Z,1520521692.077 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:12.077Z,1520521692.077 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 148
2018-03-08T15:08:12.077Z,1520521692.077 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T15:08:12.079Z,1520521692.079 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:12.079Z,1520521692.079 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 148
2018-03-08T15:08:12.079Z,1520521692.079 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T15:08:12.103Z,1520521692.103 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T15:08:12.103Z,1520521692.103 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T15:08:12.104Z,1520521692.104 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T15:08:12.488Z,1520521692.488 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T15:08:12.488Z,1520521692.488 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 148
2018-03-08T15:08:12.488Z,1520521692.488 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T15:08:12.489Z,1520521692.489 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 148
2018-03-08T15:08:12.489Z,1520521692.489 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T15:08:12.489Z,1520521692.489 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 148
2018-03-08T15:08:12.872Z,1520521692.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T15:08:12.873Z,1520521692.873 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:08:12.873Z,1520521692.873 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:08:12.873Z,1520521692.873 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T15:08:12.874Z,1520521692.874 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:08:12.874Z,1520521692.874 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:08:12.874Z,1520521692.874 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T15:08:12.875Z,1520521692.875 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:08:12.875Z,1520521692.875 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:08:13.274Z,1520521693.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T15:08:13.275Z,1520521693.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:13.667Z,1520521693.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T15:08:13.668Z,1520521693.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:14.074Z,1520521694.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T15:08:14.075Z,1520521694.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:14.480Z,1520521694.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T15:08:14.481Z,1520521694.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:14.879Z,1520521694.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T15:08:14.881Z,1520521694.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:15.290Z,1520521695.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T15:08:15.291Z,1520521695.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:15.670Z,1520521695.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T15:08:15.670Z,1520521695.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:16.066Z,1520521696.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T15:08:16.067Z,1520521696.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:16.478Z,1520521696.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T15:08:16.479Z,1520521696.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:16.878Z,1520521696.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T15:08:16.879Z,1520521696.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:17.276Z,1520521697.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T15:08:17.277Z,1520521697.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:17.677Z,1520521697.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T15:08:17.678Z,1520521697.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:18.076Z,1520521698.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T15:08:18.077Z,1520521698.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:18.473Z,1520521698.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T15:08:18.474Z,1520521698.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:18.870Z,1520521698.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T15:08:18.871Z,1520521698.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:21.976Z,1520521701.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-03-08T15:08:21.977Z,1520521701.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:22.125Z,1520521702.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T15:08:22.126Z,1520521702.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:22.470Z,1520521702.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T15:08:22.471Z,1520521702.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:22.878Z,1520521702.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T15:08:22.879Z,1520521702.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:23.252Z,1520521703.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T15:08:23.269Z,1520521703.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:23.650Z,1520521703.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T15:08:23.651Z,1520521703.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:24.050Z,1520521704.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T15:08:24.051Z,1520521704.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:24.442Z,1520521704.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T15:08:24.443Z,1520521704.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:24.854Z,1520521704.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T15:08:24.855Z,1520521704.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:25.277Z,1520521705.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T15:08:25.278Z,1520521705.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:25.656Z,1520521705.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T15:08:25.657Z,1520521705.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:26.056Z,1520521706.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T15:08:26.057Z,1520521706.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:26.451Z,1520521706.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T15:08:26.452Z,1520521706.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:26.854Z,1520521706.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T15:08:26.855Z,1520521706.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:27.255Z,1520521707.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T15:08:27.256Z,1520521707.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:27.656Z,1520521707.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T15:08:27.657Z,1520521707.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:28.055Z,1520521708.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T15:08:28.056Z,1520521708.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:28.458Z,1520521708.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T15:08:28.459Z,1520521708.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:28.858Z,1520521708.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T15:08:28.859Z,1520521708.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:29.255Z,1520521709.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T15:08:29.256Z,1520521709.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:29.656Z,1520521709.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T15:08:29.657Z,1520521709.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:30.062Z,1520521710.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T15:08:30.063Z,1520521710.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:30.450Z,1520521710.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T15:08:30.451Z,1520521710.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:30.849Z,1520521710.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T15:08:30.850Z,1520521710.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:31.259Z,1520521711.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T15:08:31.261Z,1520521711.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:31.658Z,1520521711.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T15:08:31.659Z,1520521711.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:32.059Z,1520521712.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T15:08:32.060Z,1520521712.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:32.450Z,1520521712.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:32.850Z,1520521712.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:33.266Z,1520521713.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:33.659Z,1520521713.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:34.056Z,1520521714.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:34.455Z,1520521714.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:34.852Z,1520521714.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:35.262Z,1520521715.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:35.666Z,1520521715.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:36.066Z,1520521716.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:36.449Z,1520521716.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:36.851Z,1520521716.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:37.263Z,1520521717.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:37.667Z,1520521717.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:38.061Z,1520521718.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:38.459Z,1520521718.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:38.859Z,1520521718.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:39.266Z,1520521719.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:39.665Z,1520521719.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:40.070Z,1520521720.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:40.450Z,1520521720.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:40.858Z,1520521720.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:41.255Z,1520521721.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:41.658Z,1520521721.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:42.056Z,1520521722.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:42.475Z,1520521722.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:42.858Z,1520521722.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:43.250Z,1520521723.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:43.662Z,1520521723.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:44.059Z,1520521724.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:44.468Z,1520521724.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:44.867Z,1520521724.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:45.266Z,1520521725.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:45.642Z,1520521725.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:46.042Z,1520521726.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:46.467Z,1520521726.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:46.846Z,1520521726.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:47.268Z,1520521727.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:47.667Z,1520521727.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:48.069Z,1520521728.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:48.450Z,1520521728.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:48.846Z,1520521728.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:49.242Z,1520521729.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:49.647Z,1520521729.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:50.047Z,1520521730.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:50.456Z,1520521730.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:50.856Z,1520521730.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:51.260Z,1520521731.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:51.649Z,1520521731.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:52.050Z,1520521732.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:52.447Z,1520521732.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:52.849Z,1520521732.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:53.253Z,1520521733.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:53.652Z,1520521733.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:54.058Z,1520521734.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:54.454Z,1520521734.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:54.849Z,1520521734.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:55.252Z,1520521735.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:55.652Z,1520521735.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:56.053Z,1520521736.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:56.450Z,1520521736.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:56.851Z,1520521736.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:57.255Z,1520521737.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:57.656Z,1520521737.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:58.062Z,1520521738.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:58.454Z,1520521738.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:58.851Z,1520521738.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:59.255Z,1520521739.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:08:59.656Z,1520521739.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:00.055Z,1520521740.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:00.450Z,1520521740.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:00.851Z,1520521740.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:01.256Z,1520521741.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:01.656Z,1520521741.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:02.055Z,1520521742.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:02.451Z,1520521742.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:02.851Z,1520521742.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:03.262Z,1520521743.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:03.655Z,1520521743.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:04.055Z,1520521744.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:04.450Z,1520521744.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:04.846Z,1520521744.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:05.255Z,1520521745.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:05.656Z,1520521745.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:06.062Z,1520521746.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:06.449Z,1520521746.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:06.850Z,1520521746.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:07.256Z,1520521747.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:07.657Z,1520521747.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:08.055Z,1520521748.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:08.451Z,1520521748.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:08.850Z,1520521748.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:09.255Z,1520521749.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:09.655Z,1520521749.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:10.062Z,1520521750.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:10.451Z,1520521750.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:10.854Z,1520521750.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:11.255Z,1520521751.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:11.656Z,1520521751.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:12.056Z,1520521752.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:12.452Z,1520521752.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:12.846Z,1520521752.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:13.257Z,1520521753.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:13.656Z,1520521753.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:14.062Z,1520521754.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:14.453Z,1520521754.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:14.851Z,1520521754.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:15.257Z,1520521755.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:15.657Z,1520521755.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:16.065Z,1520521756.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:16.450Z,1520521756.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:16.848Z,1520521756.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:17.265Z,1520521757.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:17.664Z,1520521757.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:18.061Z,1520521758.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:18.065Z,1520521758.065 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T15:04:18.0Z
2018-03-08T15:09:18.065Z,1520521758.065 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T15:09:18.065Z,1520521758.065 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T15:09:18.454Z,1520521758.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:18.951Z,1520521758.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:19.261Z,1520521759.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:22.364Z,1520521762.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:22.511Z,1520521762.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:22.822Z,1520521762.822 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0172.lzma
2018-03-08T15:09:22.867Z,1520521762.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:23.258Z,1520521763.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:23.615Z,1520521763.615 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0172.lzma.bak
2018-03-08T15:09:23.615Z,1520521763.615 [DataOverHttps](INFO): SBD MOMSN=7986748
2018-03-08T15:09:23.679Z,1520521763.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:24.931Z,1520521764.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:25.068Z,1520521765.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:25.462Z,1520521765.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:28.591Z,1520521768.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:28.718Z,1520521768.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:29.094Z,1520521769.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:29.492Z,1520521769.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:29.888Z,1520521769.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:30.319Z,1520521770.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:30.700Z,1520521770.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:33.802Z,1520521773.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:33.938Z,1520521773.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:34.257Z,1520521774.257 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0173.lzma
2018-03-08T15:09:34.307Z,1520521774.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:34.696Z,1520521774.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:35.055Z,1520521775.055 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0173.lzma.bak
2018-03-08T15:09:35.055Z,1520521775.055 [DataOverHttps](INFO): SBD MOMSN=7986750
2018-03-08T15:09:35.108Z,1520521775.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:35.690Z,1520521775.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:35.693Z,1520521775.693 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T15:09:35.693Z,1520521775.693 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T15:09:35.693Z,1520521775.693 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T15:09:35.904Z,1520521775.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:39.203Z,1520521779.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:39.335Z,1520521779.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:39.701Z,1520521779.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:40.101Z,1520521780.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:40.509Z,1520521780.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:40.911Z,1520521780.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:41.311Z,1520521781.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:41.711Z,1520521781.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:42.124Z,1520521782.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:42.505Z,1520521782.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:42.902Z,1520521782.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:43.299Z,1520521783.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:43.706Z,1520521783.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:44.099Z,1520521784.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:44.508Z,1520521784.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:44.908Z,1520521784.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:45.311Z,1520521785.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:45.710Z,1520521785.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:46.102Z,1520521786.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:46.503Z,1520521786.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:46.907Z,1520521786.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:47.317Z,1520521787.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:47.714Z,1520521787.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:48.124Z,1520521788.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:48.497Z,1520521788.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:48.899Z,1520521788.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:49.306Z,1520521789.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:49.699Z,1520521789.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:50.099Z,1520521790.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:50.530Z,1520521790.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:50.903Z,1520521790.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:51.335Z,1520521791.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:51.697Z,1520521791.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:52.098Z,1520521792.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:52.506Z,1520521792.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:52.906Z,1520521792.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:53.304Z,1520521793.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:53.706Z,1520521793.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:54.105Z,1520521794.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:54.501Z,1520521794.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:54.898Z,1520521794.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:55.301Z,1520521795.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:55.703Z,1520521795.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:56.099Z,1520521796.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:56.503Z,1520521796.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:56.906Z,1520521796.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:57.304Z,1520521797.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:57.698Z,1520521797.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:58.099Z,1520521798.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:58.602Z,1520521798.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:58.926Z,1520521798.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:59.305Z,1520521799.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:09:59.722Z,1520521799.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:00.118Z,1520521800.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:00.508Z,1520521800.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:00.903Z,1520521800.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:01.295Z,1520521801.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:01.699Z,1520521801.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:02.098Z,1520521802.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:02.504Z,1520521802.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:02.904Z,1520521802.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:03.303Z,1520521803.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:03.706Z,1520521803.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:04.099Z,1520521804.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:04.495Z,1520521804.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:04.898Z,1520521804.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:05.304Z,1520521805.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:05.703Z,1520521805.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:06.110Z,1520521806.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:06.499Z,1520521806.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:06.895Z,1520521806.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:07.298Z,1520521807.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:07.699Z,1520521807.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:08.107Z,1520521808.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:08.508Z,1520521808.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:08.908Z,1520521808.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:09.307Z,1520521809.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:09.698Z,1520521809.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:10.102Z,1520521810.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:10.503Z,1520521810.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:10.897Z,1520521810.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:11.313Z,1520521811.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:11.708Z,1520521811.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:12.107Z,1520521812.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:12.503Z,1520521812.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:12.895Z,1520521812.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:13.305Z,1520521813.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:13.699Z,1520521813.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:14.096Z,1520521814.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:14.511Z,1520521814.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:14.907Z,1520521814.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:15.313Z,1520521815.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:15.706Z,1520521815.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:16.102Z,1520521816.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:16.503Z,1520521816.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:16.901Z,1520521816.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:17.341Z,1520521817.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:17.712Z,1520521817.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:18.118Z,1520521818.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:18.502Z,1520521818.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:18.905Z,1520521818.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:19.297Z,1520521819.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:19.699Z,1520521819.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:20.100Z,1520521820.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:20.516Z,1520521820.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:20.917Z,1520521820.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:21.308Z,1520521821.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:21.703Z,1520521821.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:22.101Z,1520521822.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:22.505Z,1520521822.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:22.906Z,1520521822.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:23.314Z,1520521823.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:23.719Z,1520521823.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:24.123Z,1520521824.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:24.497Z,1520521824.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:24.888Z,1520521824.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:25.298Z,1520521825.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:25.698Z,1520521825.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:26.098Z,1520521826.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:26.525Z,1520521826.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:26.930Z,1520521826.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:27.296Z,1520521827.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:27.702Z,1520521827.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:28.098Z,1520521828.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:28.500Z,1520521828.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:28.896Z,1520521828.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:29.328Z,1520521829.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:29.701Z,1520521829.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:30.131Z,1520521830.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:30.497Z,1520521830.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:30.895Z,1520521830.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:31.296Z,1520521831.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:31.699Z,1520521831.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:32.102Z,1520521832.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:32.526Z,1520521832.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:32.903Z,1520521832.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:33.304Z,1520521833.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:33.698Z,1520521833.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:34.101Z,1520521834.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:34.505Z,1520521834.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:34.898Z,1520521834.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:35.315Z,1520521835.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:35.704Z,1520521835.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:36.116Z,1520521836.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:39.207Z,1520521839.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:39.346Z,1520521839.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:39.740Z,1520521839.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:40.117Z,1520521840.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:40.508Z,1520521840.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:40.908Z,1520521840.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:41.306Z,1520521841.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:41.713Z,1520521841.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:42.106Z,1520521842.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:42.508Z,1520521842.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:42.916Z,1520521842.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:43.322Z,1520521843.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:43.706Z,1520521843.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:44.103Z,1520521844.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:44.504Z,1520521844.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:44.910Z,1520521844.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:45.317Z,1520521845.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:45.720Z,1520521845.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:46.120Z,1520521846.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:46.517Z,1520521846.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:46.909Z,1520521846.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:47.310Z,1520521847.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:47.708Z,1520521847.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:48.115Z,1520521848.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:48.517Z,1520521848.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:48.915Z,1520521848.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:49.312Z,1520521849.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:49.714Z,1520521849.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:50.114Z,1520521850.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:50.508Z,1520521850.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:50.910Z,1520521850.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:51.324Z,1520521851.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:51.722Z,1520521851.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:52.112Z,1520521852.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:52.495Z,1520521852.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:52.904Z,1520521852.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:53.302Z,1520521853.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:53.709Z,1520521853.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:54.110Z,1520521854.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:54.520Z,1520521854.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:54.918Z,1520521854.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:55.318Z,1520521855.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:55.705Z,1520521855.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:56.114Z,1520521856.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:56.506Z,1520521856.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:56.910Z,1520521856.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:57.324Z,1520521857.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:57.720Z,1520521857.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:58.122Z,1520521858.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:58.501Z,1520521858.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:58.909Z,1520521858.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:59.315Z,1520521859.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:10:59.707Z,1520521859.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:00.109Z,1520521860.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:00.528Z,1520521860.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:00.915Z,1520521860.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:01.312Z,1520521861.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:01.706Z,1520521861.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:02.105Z,1520521862.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:02.515Z,1520521862.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:02.914Z,1520521862.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:03.309Z,1520521863.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:03.718Z,1520521863.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:04.125Z,1520521864.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:04.518Z,1520521864.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:04.910Z,1520521864.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:05.315Z,1520521865.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:05.710Z,1520521865.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:06.109Z,1520521866.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:06.518Z,1520521866.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:06.912Z,1520521866.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:07.324Z,1520521867.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:07.727Z,1520521867.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:08.105Z,1520521868.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:08.509Z,1520521868.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:08.910Z,1520521868.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:09.309Z,1520521869.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:09.715Z,1520521869.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:10.126Z,1520521870.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:10.499Z,1520521870.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:10.909Z,1520521870.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:11.306Z,1520521871.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:11.709Z,1520521871.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:12.118Z,1520521872.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:12.518Z,1520521872.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:12.912Z,1520521872.912 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:12.912Z,1520521872.912 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 149
2018-03-08T15:11:12.912Z,1520521872.912 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T15:11:12.914Z,1520521872.914 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:12.914Z,1520521872.914 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 149
2018-03-08T15:11:12.914Z,1520521872.914 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T15:11:12.916Z,1520521872.916 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:12.916Z,1520521872.916 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 149
2018-03-08T15:11:12.916Z,1520521872.916 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T15:11:12.932Z,1520521872.932 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T15:11:12.932Z,1520521872.932 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T15:11:12.945Z,1520521872.945 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T15:11:13.336Z,1520521873.336 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T15:11:13.344Z,1520521873.344 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 149
2018-03-08T15:11:13.345Z,1520521873.345 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T15:11:13.345Z,1520521873.345 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 149
2018-03-08T15:11:13.345Z,1520521873.345 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T15:11:13.346Z,1520521873.346 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 149
2018-03-08T15:11:13.716Z,1520521873.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T15:11:13.721Z,1520521873.721 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:11:13.721Z,1520521873.721 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:11:13.721Z,1520521873.721 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T15:11:13.722Z,1520521873.722 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:11:13.722Z,1520521873.722 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:11:13.722Z,1520521873.722 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T15:11:13.723Z,1520521873.723 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:11:13.723Z,1520521873.723 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:11:14.114Z,1520521874.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T15:11:14.115Z,1520521874.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:14.518Z,1520521874.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T15:11:14.519Z,1520521874.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:14.898Z,1520521874.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T15:11:14.899Z,1520521874.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:15.332Z,1520521875.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T15:11:15.334Z,1520521875.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:15.730Z,1520521875.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T15:11:15.731Z,1520521875.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:16.117Z,1520521876.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T15:11:16.118Z,1520521876.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:16.503Z,1520521876.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T15:11:16.505Z,1520521876.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:16.904Z,1520521876.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T15:11:16.906Z,1520521876.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:17.315Z,1520521877.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T15:11:17.333Z,1520521877.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:17.706Z,1520521877.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T15:11:17.707Z,1520521877.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:18.111Z,1520521878.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T15:11:18.112Z,1520521878.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:18.518Z,1520521878.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T15:11:18.519Z,1520521878.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:18.916Z,1520521878.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T15:11:18.917Z,1520521878.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:19.314Z,1520521879.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T15:11:19.315Z,1520521879.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:19.707Z,1520521879.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T15:11:19.708Z,1520521879.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:20.109Z,1520521880.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T15:11:20.111Z,1520521880.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:20.507Z,1520521880.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T15:11:20.508Z,1520521880.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:20.903Z,1520521880.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T15:11:20.904Z,1520521880.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:21.312Z,1520521881.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T15:11:21.313Z,1520521881.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:21.720Z,1520521881.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T15:11:21.721Z,1520521881.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:22.122Z,1520521882.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T15:11:22.123Z,1520521882.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:22.498Z,1520521882.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T15:11:22.499Z,1520521882.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:22.909Z,1520521882.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T15:11:22.910Z,1520521882.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:23.309Z,1520521883.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T15:11:23.311Z,1520521883.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:23.717Z,1520521883.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T15:11:23.718Z,1520521883.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:24.106Z,1520521884.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T15:11:24.107Z,1520521884.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:24.513Z,1520521884.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T15:11:24.515Z,1520521884.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:24.924Z,1520521884.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T15:11:24.925Z,1520521884.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:25.352Z,1520521885.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T15:11:25.353Z,1520521885.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:25.712Z,1520521885.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T15:11:25.713Z,1520521885.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:26.107Z,1520521886.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T15:11:26.107Z,1520521886.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:26.515Z,1520521886.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T15:11:26.515Z,1520521886.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:26.909Z,1520521886.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T15:11:26.910Z,1520521886.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:27.316Z,1520521887.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T15:11:27.317Z,1520521887.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:27.726Z,1520521887.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T15:11:27.726Z,1520521887.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:28.121Z,1520521888.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T15:11:28.122Z,1520521888.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:28.508Z,1520521888.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T15:11:28.509Z,1520521888.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:28.910Z,1520521888.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T15:11:28.911Z,1520521888.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:29.315Z,1520521889.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T15:11:29.317Z,1520521889.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:29.717Z,1520521889.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T15:11:29.718Z,1520521889.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:30.112Z,1520521890.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T15:11:30.113Z,1520521890.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:30.518Z,1520521890.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T15:11:30.519Z,1520521890.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:30.920Z,1520521890.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T15:11:30.922Z,1520521890.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:31.324Z,1520521891.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T15:11:31.325Z,1520521891.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:31.711Z,1520521891.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T15:11:31.712Z,1520521891.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:32.113Z,1520521892.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T15:11:32.114Z,1520521892.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:32.512Z,1520521892.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T15:11:32.514Z,1520521892.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:32.922Z,1520521892.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:33.322Z,1520521893.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:33.717Z,1520521893.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:34.122Z,1520521894.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:34.518Z,1520521894.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:34.913Z,1520521894.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:35.317Z,1520521895.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:35.716Z,1520521895.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:36.122Z,1520521896.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:39.221Z,1520521899.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:39.370Z,1520521899.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:39.722Z,1520521899.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:40.089Z,1520521900.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:40.495Z,1520521900.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:40.891Z,1520521900.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:41.296Z,1520521901.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:41.697Z,1520521901.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:42.095Z,1520521902.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:42.493Z,1520521902.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:42.898Z,1520521902.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:43.290Z,1520521903.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:43.691Z,1520521903.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:44.093Z,1520521904.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:44.497Z,1520521904.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:44.895Z,1520521904.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:45.296Z,1520521905.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:45.691Z,1520521905.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:46.090Z,1520521906.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:46.493Z,1520521906.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:46.890Z,1520521906.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:47.296Z,1520521907.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:47.706Z,1520521907.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:48.095Z,1520521908.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:48.490Z,1520521908.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:48.890Z,1520521908.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:49.293Z,1520521909.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:49.692Z,1520521909.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:50.090Z,1520521910.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:50.497Z,1520521910.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:50.896Z,1520521910.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:50.934Z,1520521910.934 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T15:11:51.302Z,1520521911.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:51.698Z,1520521911.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:52.095Z,1520521912.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:52.498Z,1520521912.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:52.893Z,1520521912.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:53.302Z,1520521913.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:53.650Z,1520521913.650 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-03-08T15:11:53.650Z,1520521913.650 [DropWeight] Hardware Fault, FailCount= 1
2018-03-08T15:11:53.650Z,1520521913.650 [DropWeight](ERROR): Hardware Fault
2018-03-08T15:11:53.729Z,1520521913.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:53.744Z,1520521913.744 [CBIT](INFO): Critical error at 20180308T151153
2018-03-08T15:11:53.751Z,1520521913.751 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-03-08T15:11:53.751Z,1520521913.751 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-03-08T15:11:54.110Z,1520521914.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:54.148Z,1520521914.148 [CBIT](INFO): Critical error at 20180308T151153
2018-03-08T15:11:54.497Z,1520521914.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:54.898Z,1520521914.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:55.298Z,1520521915.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:55.694Z,1520521915.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:56.092Z,1520521916.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:56.506Z,1520521916.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:56.913Z,1520521916.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:57.303Z,1520521917.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:57.692Z,1520521917.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:58.100Z,1520521918.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:58.495Z,1520521918.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:58.897Z,1520521918.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:59.302Z,1520521919.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:11:59.710Z,1520521919.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:00.115Z,1520521920.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:00.493Z,1520521920.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:00.897Z,1520521920.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:01.298Z,1520521921.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:01.693Z,1520521921.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:02.092Z,1520521922.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:02.510Z,1520521922.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:02.908Z,1520521922.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:03.296Z,1520521923.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:03.694Z,1520521923.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:04.098Z,1520521924.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:04.495Z,1520521924.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:04.902Z,1520521924.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:05.304Z,1520521925.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:05.707Z,1520521925.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:06.099Z,1520521926.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:06.491Z,1520521926.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:06.891Z,1520521926.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:07.295Z,1520521927.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:07.692Z,1520521927.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:08.091Z,1520521928.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:08.504Z,1520521928.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:08.905Z,1520521928.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:09.302Z,1520521929.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:09.698Z,1520521929.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:10.104Z,1520521930.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:10.494Z,1520521930.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:10.902Z,1520521930.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:11.314Z,1520521931.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:11.718Z,1520521931.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:12.107Z,1520521932.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:12.486Z,1520521932.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:12.891Z,1520521932.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:13.286Z,1520521933.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:13.687Z,1520521933.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:14.082Z,1520521934.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:14.526Z,1520521934.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:14.922Z,1520521934.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:15.305Z,1520521935.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:15.689Z,1520521935.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:16.094Z,1520521936.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:16.502Z,1520521936.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:16.898Z,1520521936.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:17.299Z,1520521937.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:17.699Z,1520521937.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:18.102Z,1520521938.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:18.494Z,1520521938.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:18.888Z,1520521938.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:19.299Z,1520521939.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:19.691Z,1520521939.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:20.088Z,1520521940.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:20.502Z,1520521940.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:20.909Z,1520521940.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:21.296Z,1520521941.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:21.693Z,1520521941.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:22.090Z,1520521942.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:22.491Z,1520521942.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:22.889Z,1520521942.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:23.299Z,1520521943.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:23.699Z,1520521943.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:24.101Z,1520521944.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:24.493Z,1520521944.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:24.889Z,1520521944.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:25.289Z,1520521945.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:25.690Z,1520521945.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:26.089Z,1520521946.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:26.499Z,1520521946.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:26.899Z,1520521946.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:27.303Z,1520521947.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:27.698Z,1520521947.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:28.094Z,1520521948.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:28.495Z,1520521948.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:28.890Z,1520521948.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:29.299Z,1520521949.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:29.701Z,1520521949.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:30.100Z,1520521950.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:30.498Z,1520521950.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:30.891Z,1520521950.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:31.301Z,1520521951.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:31.697Z,1520521951.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:32.088Z,1520521952.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:32.500Z,1520521952.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:32.900Z,1520521952.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:33.309Z,1520521953.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:33.693Z,1520521953.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:34.095Z,1520521954.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:34.496Z,1520521954.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:34.891Z,1520521954.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:35.301Z,1520521955.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:35.704Z,1520521955.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:36.100Z,1520521956.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:36.498Z,1520521956.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:39.614Z,1520521959.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:39.751Z,1520521959.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:40.131Z,1520521960.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:40.536Z,1520521960.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:40.939Z,1520521960.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:41.306Z,1520521961.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:41.713Z,1520521961.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:42.109Z,1520521962.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:42.513Z,1520521962.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:42.915Z,1520521962.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:43.318Z,1520521963.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:43.708Z,1520521963.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:44.102Z,1520521964.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:44.515Z,1520521964.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:44.926Z,1520521964.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:45.318Z,1520521965.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:45.718Z,1520521965.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:46.116Z,1520521966.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:46.515Z,1520521966.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:46.910Z,1520521966.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:47.307Z,1520521967.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:47.710Z,1520521967.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:48.117Z,1520521968.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:48.515Z,1520521968.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:48.922Z,1520521968.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:49.325Z,1520521969.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:49.713Z,1520521969.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:50.115Z,1520521970.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:50.508Z,1520521970.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:50.909Z,1520521970.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:51.321Z,1520521971.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:51.722Z,1520521971.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:52.120Z,1520521972.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:52.515Z,1520521972.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:52.917Z,1520521972.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:53.308Z,1520521973.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:53.708Z,1520521973.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:54.108Z,1520521974.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:54.521Z,1520521974.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:54.922Z,1520521974.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:55.319Z,1520521975.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:55.715Z,1520521975.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:56.111Z,1520521976.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:56.510Z,1520521976.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:56.912Z,1520521976.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:57.318Z,1520521977.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:57.784Z,1520521977.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:58.152Z,1520521978.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:58.499Z,1520521978.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:58.902Z,1520521978.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:59.299Z,1520521979.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:12:59.698Z,1520521979.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:00.099Z,1520521980.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:00.559Z,1520521980.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:00.922Z,1520521980.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:01.312Z,1520521981.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:01.715Z,1520521981.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:02.111Z,1520521982.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:02.506Z,1520521982.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:02.907Z,1520521982.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:03.308Z,1520521983.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:03.713Z,1520521983.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:04.118Z,1520521984.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:04.514Z,1520521984.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:04.909Z,1520521984.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:05.306Z,1520521985.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:05.711Z,1520521985.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:06.105Z,1520521986.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:06.513Z,1520521986.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:06.912Z,1520521986.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:07.317Z,1520521987.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:07.706Z,1520521987.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:08.105Z,1520521988.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:08.520Z,1520521988.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:08.915Z,1520521988.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:09.326Z,1520521989.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:09.724Z,1520521989.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:10.126Z,1520521990.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:10.515Z,1520521990.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:10.910Z,1520521990.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:11.316Z,1520521991.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:11.710Z,1520521991.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:12.117Z,1520521992.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:12.522Z,1520521992.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:12.929Z,1520521992.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:13.330Z,1520521993.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:13.717Z,1520521993.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:14.112Z,1520521994.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:14.509Z,1520521994.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:14.921Z,1520521994.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:15.327Z,1520521995.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:15.744Z,1520521995.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:16.120Z,1520521996.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:16.512Z,1520521996.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:16.918Z,1520521996.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:17.314Z,1520521997.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:17.712Z,1520521997.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:18.126Z,1520521998.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:18.523Z,1520521998.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:18.924Z,1520521998.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:19.320Z,1520521999.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:19.712Z,1520521999.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:20.117Z,1520522000.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:20.513Z,1520522000.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:20.913Z,1520522000.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:21.324Z,1520522001.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:21.725Z,1520522001.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:22.127Z,1520522002.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:22.514Z,1520522002.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:22.915Z,1520522002.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:23.319Z,1520522003.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:23.711Z,1520522003.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:24.116Z,1520522004.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:24.524Z,1520522004.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:24.928Z,1520522004.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:25.336Z,1520522005.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:25.711Z,1520522005.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:26.115Z,1520522006.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:26.519Z,1520522006.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:26.915Z,1520522006.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:27.320Z,1520522007.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:27.725Z,1520522007.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:28.124Z,1520522008.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:28.526Z,1520522008.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:28.914Z,1520522008.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:29.313Z,1520522009.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:29.718Z,1520522009.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:30.116Z,1520522010.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:30.518Z,1520522010.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:30.929Z,1520522010.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:31.321Z,1520522011.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:31.715Z,1520522011.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:32.114Z,1520522012.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:32.511Z,1520522012.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:32.919Z,1520522012.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:33.320Z,1520522013.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:33.722Z,1520522013.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:34.124Z,1520522014.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:34.517Z,1520522014.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:34.913Z,1520522014.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:35.313Z,1520522015.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:35.711Z,1520522015.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:36.118Z,1520522016.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:36.520Z,1520522016.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:39.625Z,1520522019.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:39.766Z,1520522019.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:40.114Z,1520522020.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:40.491Z,1520522020.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:40.922Z,1520522020.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:41.312Z,1520522021.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:41.711Z,1520522021.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:42.117Z,1520522022.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:42.516Z,1520522022.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:42.898Z,1520522022.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:43.298Z,1520522023.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:43.695Z,1520522023.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:44.102Z,1520522024.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:44.458Z,1520522024.458 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T15:13:44.458Z,1520522024.458 [NAL9602] Data Fault, FailCount= 2
2018-03-08T15:13:44.458Z,1520522024.458 [NAL9602](ERROR): Data Fault
2018-03-08T15:13:44.511Z,1520522024.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:44.533Z,1520522024.533 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T15:13:44.854Z,1520522024.854 [NAL9602](INFO): Powering down
2018-03-08T15:13:44.909Z,1520522024.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:45.297Z,1520522025.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:45.693Z,1520522025.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:45.707Z,1520522025.707 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T15:13:45.707Z,1520522025.707 [NAL9602] No Fault, FailCount= 2
2018-03-08T15:13:46.098Z,1520522026.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:46.497Z,1520522026.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:46.894Z,1520522026.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:47.302Z,1520522027.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:47.696Z,1520522027.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:48.094Z,1520522028.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:48.498Z,1520522028.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:48.900Z,1520522028.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:49.296Z,1520522029.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:49.702Z,1520522029.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:50.100Z,1520522030.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:50.500Z,1520522030.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:50.907Z,1520522030.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:51.291Z,1520522031.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:51.683Z,1520522031.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:52.085Z,1520522032.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:52.491Z,1520522032.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:52.894Z,1520522032.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:53.292Z,1520522033.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:53.689Z,1520522033.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:54.091Z,1520522034.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:54.497Z,1520522034.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:54.891Z,1520522034.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:55.291Z,1520522035.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:55.692Z,1520522035.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:56.089Z,1520522036.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:56.492Z,1520522036.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:56.897Z,1520522036.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:57.288Z,1520522037.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:57.694Z,1520522037.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:58.091Z,1520522038.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:58.502Z,1520522038.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:58.894Z,1520522038.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:59.301Z,1520522039.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:13:59.693Z,1520522039.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:00.094Z,1520522040.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:00.494Z,1520522040.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:00.891Z,1520522040.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:01.294Z,1520522041.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:01.694Z,1520522041.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:02.089Z,1520522042.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:02.494Z,1520522042.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:02.891Z,1520522042.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:03.290Z,1520522043.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:03.698Z,1520522043.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:04.093Z,1520522044.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:04.489Z,1520522044.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:04.892Z,1520522044.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:05.294Z,1520522045.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:05.693Z,1520522045.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:06.094Z,1520522046.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:06.493Z,1520522046.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:06.893Z,1520522046.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:07.293Z,1520522047.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:07.693Z,1520522047.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:08.090Z,1520522048.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:08.494Z,1520522048.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:08.899Z,1520522048.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:09.290Z,1520522049.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:09.693Z,1520522049.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:10.093Z,1520522050.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:10.493Z,1520522050.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:10.892Z,1520522050.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:11.291Z,1520522051.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:11.694Z,1520522051.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:12.095Z,1520522052.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:12.491Z,1520522052.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:12.892Z,1520522052.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:13.298Z,1520522053.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:13.697Z,1520522053.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:14.089Z,1520522054.089 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:14.090Z,1520522054.090 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 150
2018-03-08T15:14:14.090Z,1520522054.090 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T15:14:14.091Z,1520522054.091 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:14.091Z,1520522054.091 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 150
2018-03-08T15:14:14.091Z,1520522054.091 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T15:14:14.093Z,1520522054.093 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:14.093Z,1520522054.093 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 150
2018-03-08T15:14:14.093Z,1520522054.093 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T15:14:14.105Z,1520522054.105 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T15:14:14.106Z,1520522054.106 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T15:14:14.106Z,1520522054.106 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T15:14:14.525Z,1520522054.525 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T15:14:14.525Z,1520522054.525 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 150
2018-03-08T15:14:14.525Z,1520522054.525 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T15:14:14.525Z,1520522054.525 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 150
2018-03-08T15:14:14.526Z,1520522054.526 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T15:14:14.526Z,1520522054.526 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 150
2018-03-08T15:14:14.892Z,1520522054.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T15:14:14.893Z,1520522054.893 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:14:14.893Z,1520522054.893 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:14:14.893Z,1520522054.893 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T15:14:14.894Z,1520522054.894 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:14:14.894Z,1520522054.894 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:14:14.894Z,1520522054.894 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T15:14:14.895Z,1520522054.895 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:14:14.895Z,1520522054.895 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:14:15.251Z,1520522055.251 [NAL9602](INFO): Powering up NAL9602
2018-03-08T15:14:15.302Z,1520522055.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T15:14:15.303Z,1520522055.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:15.694Z,1520522055.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T15:14:15.695Z,1520522055.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:16.091Z,1520522056.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T15:14:16.092Z,1520522056.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:16.495Z,1520522056.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T15:14:16.497Z,1520522056.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:16.899Z,1520522056.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T15:14:16.900Z,1520522056.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:17.295Z,1520522057.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T15:14:17.296Z,1520522057.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:17.696Z,1520522057.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T15:14:17.697Z,1520522057.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:18.096Z,1520522058.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T15:14:18.097Z,1520522058.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:18.494Z,1520522058.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T15:14:18.495Z,1520522058.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:18.895Z,1520522058.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T15:14:18.896Z,1520522058.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:19.294Z,1520522059.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T15:14:19.295Z,1520522059.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:19.694Z,1520522059.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T15:14:19.695Z,1520522059.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:20.099Z,1520522060.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T15:14:20.100Z,1520522060.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:20.494Z,1520522060.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T15:14:20.495Z,1520522060.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:20.894Z,1520522060.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T15:14:20.895Z,1520522060.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:21.299Z,1520522061.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T15:14:21.300Z,1520522061.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:21.696Z,1520522061.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T15:14:21.697Z,1520522061.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:22.094Z,1520522062.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T15:14:22.095Z,1520522062.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:22.492Z,1520522062.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T15:14:22.493Z,1520522062.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:22.902Z,1520522062.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T15:14:22.903Z,1520522062.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:23.294Z,1520522063.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T15:14:23.295Z,1520522063.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:23.695Z,1520522063.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T15:14:23.696Z,1520522063.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:24.094Z,1520522064.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T15:14:24.095Z,1520522064.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:24.494Z,1520522064.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T15:14:24.495Z,1520522064.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:24.898Z,1520522064.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T15:14:24.899Z,1520522064.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:25.297Z,1520522065.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T15:14:25.298Z,1520522065.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:25.703Z,1520522065.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T15:14:25.704Z,1520522065.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:26.058Z,1520522066.058 [NAL9602](INFO): NAL9602 initialized
2018-03-08T15:14:26.104Z,1520522066.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T15:14:26.105Z,1520522066.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:26.495Z,1520522066.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T15:14:26.496Z,1520522066.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:26.904Z,1520522066.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T15:14:26.905Z,1520522066.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:27.312Z,1520522067.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T15:14:27.314Z,1520522067.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:27.708Z,1520522067.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T15:14:27.709Z,1520522067.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:28.098Z,1520522068.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T15:14:28.099Z,1520522068.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:28.502Z,1520522068.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T15:14:28.503Z,1520522068.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:28.896Z,1520522068.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T15:14:28.897Z,1520522068.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:29.310Z,1520522069.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T15:14:29.311Z,1520522069.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:29.714Z,1520522069.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T15:14:29.715Z,1520522069.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:30.109Z,1520522070.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T15:14:30.110Z,1520522070.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:30.508Z,1520522070.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T15:14:30.511Z,1520522070.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:30.906Z,1520522070.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T15:14:30.907Z,1520522070.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:31.299Z,1520522071.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T15:14:31.300Z,1520522071.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:31.701Z,1520522071.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T15:14:31.702Z,1520522071.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:32.124Z,1520522072.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T15:14:32.129Z,1520522072.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:32.512Z,1520522072.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T15:14:32.513Z,1520522072.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:32.904Z,1520522072.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T15:14:32.905Z,1520522072.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:33.298Z,1520522073.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T15:14:33.299Z,1520522073.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:33.694Z,1520522073.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T15:14:33.695Z,1520522073.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:34.105Z,1520522074.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:34.517Z,1520522074.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:34.908Z,1520522074.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:35.301Z,1520522075.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:35.702Z,1520522075.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:36.109Z,1520522076.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:36.112Z,1520522076.112 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T15:14:36.112Z,1520522076.112 [Default:CheckIn:C.Wait] Stopped
2018-03-08T15:14:36.112Z,1520522076.112 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T15:14:36.112Z,1520522076.112 [Default:CheckIn:D] Running Loop=1
2018-03-08T15:14:36.518Z,1520522076.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:36.525Z,1520522076.525 [Default:CheckIn:D] Stopped
2018-03-08T15:14:36.525Z,1520522076.525 [Default:CheckIn:E] Running Loop=1
2018-03-08T15:14:36.921Z,1520522076.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:36.924Z,1520522076.924 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 448.861979 min 
2018-03-08T15:14:36.925Z,1520522076.925 [Default:CheckIn:E] Stopped
2018-03-08T15:14:36.925Z,1520522076.925 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T15:14:36.925Z,1520522076.925 [Default:CheckIn] Stopped
2018-03-08T15:14:36.925Z,1520522076.925 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T15:14:36.925Z,1520522076.925 [Default:CheckIn](INFO): Running loop #44
2018-03-08T15:14:36.925Z,1520522076.925 [Default:CheckIn] Running Loop=44
2018-03-08T15:14:36.925Z,1520522076.925 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T15:14:36.925Z,1520522076.925 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T15:14:39.000Z,1520522080.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:40.124Z,1520522080.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:40.506Z,1520522080.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:40.876Z,1520522080.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:41.281Z,1520522081.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:41.675Z,1520522081.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:42.074Z,1520522082.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:42.474Z,1520522082.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:42.874Z,1520522082.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:43.277Z,1520522083.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:43.679Z,1520522083.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:44.082Z,1520522084.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:44.474Z,1520522084.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:44.872Z,1520522084.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:45.273Z,1520522085.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:45.675Z,1520522085.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:46.083Z,1520522086.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:46.490Z,1520522086.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:46.883Z,1520522086.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:47.274Z,1520522087.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:47.672Z,1520522087.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:48.076Z,1520522088.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:48.483Z,1520522088.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:48.883Z,1520522088.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:49.268Z,1520522089.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:49.678Z,1520522089.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:50.079Z,1520522090.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:50.481Z,1520522090.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:50.880Z,1520522090.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:51.274Z,1520522091.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:51.674Z,1520522091.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:52.084Z,1520522092.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:52.484Z,1520522092.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:52.882Z,1520522092.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:53.273Z,1520522093.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:53.680Z,1520522093.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:54.086Z,1520522094.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:54.491Z,1520522094.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:54.880Z,1520522094.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:55.274Z,1520522095.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:55.679Z,1520522095.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:56.085Z,1520522096.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:56.484Z,1520522096.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:56.880Z,1520522096.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:57.278Z,1520522097.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:57.672Z,1520522097.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:58.084Z,1520522098.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:58.484Z,1520522098.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:58.885Z,1520522098.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:59.275Z,1520522099.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:14:59.671Z,1520522099.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:00.079Z,1520522100.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:00.484Z,1520522100.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:00.880Z,1520522100.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:01.278Z,1520522101.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:01.683Z,1520522101.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:02.083Z,1520522102.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:02.484Z,1520522102.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:02.884Z,1520522102.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:03.279Z,1520522103.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:03.666Z,1520522103.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:04.086Z,1520522104.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:04.495Z,1520522104.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:04.894Z,1520522104.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:05.272Z,1520522105.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:05.671Z,1520522105.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:06.070Z,1520522106.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:06.470Z,1520522106.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:06.903Z,1520522106.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:07.267Z,1520522107.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:07.667Z,1520522107.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:08.100Z,1520522108.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:08.480Z,1520522108.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:08.873Z,1520522108.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:09.269Z,1520522109.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:09.666Z,1520522109.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:10.073Z,1520522110.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:10.482Z,1520522110.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:10.878Z,1520522110.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:11.271Z,1520522111.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:11.672Z,1520522111.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:12.072Z,1520522112.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:12.471Z,1520522112.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:12.884Z,1520522112.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:13.273Z,1520522113.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:13.673Z,1520522113.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:14.083Z,1520522114.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:14.494Z,1520522114.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:14.881Z,1520522114.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:15.287Z,1520522115.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:15.688Z,1520522115.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:16.080Z,1520522116.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:16.491Z,1520522116.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:16.891Z,1520522116.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:17.263Z,1520522117.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:17.671Z,1520522117.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:18.097Z,1520522118.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:18.495Z,1520522118.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:18.884Z,1520522118.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:19.274Z,1520522119.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:19.673Z,1520522119.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:20.077Z,1520522120.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:20.480Z,1520522120.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:20.877Z,1520522120.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:21.272Z,1520522121.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:21.664Z,1520522121.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:22.075Z,1520522122.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:22.480Z,1520522122.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:22.879Z,1520522122.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:23.272Z,1520522123.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:23.672Z,1520522123.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:24.080Z,1520522124.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:24.480Z,1520522124.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:24.882Z,1520522124.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:25.274Z,1520522125.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:25.673Z,1520522125.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:26.079Z,1520522126.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:26.479Z,1520522126.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:26.879Z,1520522126.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:27.274Z,1520522127.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:27.674Z,1520522127.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:28.079Z,1520522128.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:28.480Z,1520522128.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:28.886Z,1520522128.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:29.275Z,1520522129.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:29.673Z,1520522129.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:30.086Z,1520522130.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:30.482Z,1520522130.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:30.880Z,1520522130.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:31.274Z,1520522131.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:31.675Z,1520522131.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:32.082Z,1520522132.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:32.479Z,1520522132.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:32.886Z,1520522132.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:33.278Z,1520522133.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:33.679Z,1520522133.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:34.077Z,1520522134.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:34.490Z,1520522134.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:34.883Z,1520522134.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:35.277Z,1520522135.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:35.672Z,1520522135.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:36.086Z,1520522136.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:36.495Z,1520522136.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:36.884Z,1520522136.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:37.273Z,1520522137.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:40.384Z,1520522140.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:40.527Z,1520522140.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:40.886Z,1520522140.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:41.274Z,1520522141.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:41.651Z,1520522141.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:42.078Z,1520522142.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:42.452Z,1520522142.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:42.878Z,1520522142.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:43.264Z,1520522143.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:43.690Z,1520522143.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:44.062Z,1520522144.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:44.458Z,1520522144.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:44.858Z,1520522144.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:45.259Z,1520522145.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:45.658Z,1520522145.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:46.057Z,1520522146.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:46.466Z,1520522146.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:46.876Z,1520522146.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:47.268Z,1520522147.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:47.658Z,1520522147.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:48.066Z,1520522148.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:48.458Z,1520522148.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:48.858Z,1520522148.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:49.264Z,1520522149.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:49.670Z,1520522149.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:50.065Z,1520522150.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:50.461Z,1520522150.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:50.856Z,1520522150.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:51.278Z,1520522151.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:51.655Z,1520522151.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:52.055Z,1520522152.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:52.467Z,1520522152.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:52.868Z,1520522152.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:53.259Z,1520522153.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:53.655Z,1520522153.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:54.063Z,1520522154.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:54.457Z,1520522154.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:54.859Z,1520522154.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:55.264Z,1520522155.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:55.665Z,1520522155.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:56.064Z,1520522156.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:56.458Z,1520522156.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:56.858Z,1520522156.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:57.255Z,1520522157.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:57.659Z,1520522157.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:58.063Z,1520522158.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:58.482Z,1520522158.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:58.864Z,1520522158.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:59.284Z,1520522159.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:15:59.655Z,1520522159.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:00.054Z,1520522160.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:00.455Z,1520522160.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:00.854Z,1520522160.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:01.256Z,1520522161.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:01.680Z,1520522161.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:02.056Z,1520522162.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:02.455Z,1520522162.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:02.854Z,1520522162.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:03.250Z,1520522163.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:03.655Z,1520522163.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:04.054Z,1520522164.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:04.483Z,1520522164.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:04.860Z,1520522164.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:05.282Z,1520522165.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:05.654Z,1520522165.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:06.054Z,1520522166.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:06.455Z,1520522166.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:06.854Z,1520522166.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:07.256Z,1520522167.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:07.684Z,1520522167.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:08.058Z,1520522168.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:08.455Z,1520522168.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:08.854Z,1520522168.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:09.247Z,1520522169.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:09.652Z,1520522169.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:10.054Z,1520522170.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:10.458Z,1520522170.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:10.860Z,1520522170.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:11.257Z,1520522171.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:11.654Z,1520522171.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:12.055Z,1520522172.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:12.454Z,1520522172.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:12.854Z,1520522172.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:13.257Z,1520522173.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:13.684Z,1520522173.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:14.056Z,1520522174.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:14.455Z,1520522174.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:14.854Z,1520522174.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:15.251Z,1520522175.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:15.654Z,1520522175.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:16.051Z,1520522176.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:16.456Z,1520522176.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:16.883Z,1520522176.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:17.283Z,1520522177.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:17.657Z,1520522177.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:18.062Z,1520522178.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:18.455Z,1520522178.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:18.855Z,1520522178.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:19.282Z,1520522179.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:19.660Z,1520522179.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:20.062Z,1520522180.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:20.456Z,1520522180.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:20.856Z,1520522180.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:21.251Z,1520522181.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:21.656Z,1520522181.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:22.054Z,1520522182.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:22.490Z,1520522182.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:22.866Z,1520522182.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:23.263Z,1520522183.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:23.655Z,1520522183.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:24.057Z,1520522184.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:24.457Z,1520522184.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:24.857Z,1520522184.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:25.262Z,1520522185.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:25.663Z,1520522185.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:26.062Z,1520522186.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:26.462Z,1520522186.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:26.857Z,1520522186.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:27.251Z,1520522187.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:27.668Z,1520522187.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:28.057Z,1520522188.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:28.461Z,1520522188.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:28.864Z,1520522188.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:29.259Z,1520522189.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:29.658Z,1520522189.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:30.053Z,1520522190.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:30.459Z,1520522190.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:30.857Z,1520522190.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:31.260Z,1520522191.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:31.663Z,1520522191.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:32.060Z,1520522192.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:32.458Z,1520522192.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:32.857Z,1520522192.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:33.257Z,1520522193.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:33.657Z,1520522193.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:34.057Z,1520522194.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:34.461Z,1520522194.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:34.864Z,1520522194.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:35.266Z,1520522195.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:35.651Z,1520522195.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:36.053Z,1520522196.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:36.454Z,1520522196.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:36.850Z,1520522196.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:37.264Z,1520522197.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:37.663Z,1520522197.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:40.760Z,1520522200.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:40.898Z,1520522200.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:41.255Z,1520522201.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:41.651Z,1520522201.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:42.064Z,1520522202.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:42.462Z,1520522202.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:42.856Z,1520522202.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:43.245Z,1520522203.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:43.657Z,1520522203.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:44.055Z,1520522204.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:44.461Z,1520522204.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:44.867Z,1520522204.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:45.258Z,1520522205.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:45.637Z,1520522205.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:46.065Z,1520522206.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:46.462Z,1520522206.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:46.838Z,1520522206.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:47.258Z,1520522207.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:47.656Z,1520522207.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:48.052Z,1520522208.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:48.450Z,1520522208.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:48.850Z,1520522208.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:49.248Z,1520522209.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:49.654Z,1520522209.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:50.049Z,1520522210.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:50.451Z,1520522210.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:50.858Z,1520522210.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:51.255Z,1520522211.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:51.648Z,1520522211.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:52.050Z,1520522212.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:52.447Z,1520522212.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:52.846Z,1520522212.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:53.252Z,1520522213.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:53.656Z,1520522213.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:54.052Z,1520522214.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:54.450Z,1520522214.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:54.850Z,1520522214.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:55.250Z,1520522215.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:55.657Z,1520522215.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:56.060Z,1520522216.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:56.457Z,1520522216.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:56.862Z,1520522216.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:57.262Z,1520522217.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:57.654Z,1520522217.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:58.063Z,1520522218.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:58.451Z,1520522218.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:58.862Z,1520522218.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:59.264Z,1520522219.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:16:59.670Z,1520522219.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:00.063Z,1520522220.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:00.466Z,1520522220.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:00.866Z,1520522220.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:01.238Z,1520522221.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:01.638Z,1520522221.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:02.062Z,1520522222.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:02.460Z,1520522222.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:02.866Z,1520522222.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:03.270Z,1520522223.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:03.642Z,1520522223.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:04.045Z,1520522224.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:04.439Z,1520522224.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:04.845Z,1520522224.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:05.271Z,1520522225.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:05.669Z,1520522225.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:06.084Z,1520522226.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:06.445Z,1520522226.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:06.839Z,1520522226.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:07.246Z,1520522227.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:07.645Z,1520522227.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:08.071Z,1520522228.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:08.452Z,1520522228.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:08.874Z,1520522228.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:09.243Z,1520522229.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:09.647Z,1520522229.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:10.043Z,1520522230.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:10.445Z,1520522230.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:10.872Z,1520522230.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:11.274Z,1520522231.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:11.643Z,1520522231.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:12.046Z,1520522232.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:12.462Z,1520522232.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:12.844Z,1520522232.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:13.268Z,1520522233.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:13.667Z,1520522233.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:14.053Z,1520522234.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:14.440Z,1520522234.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:14.866Z,1520522234.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:15.243Z,1520522235.243 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:15.243Z,1520522235.243 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 151
2018-03-08T15:17:15.243Z,1520522235.243 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T15:17:15.245Z,1520522235.245 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:15.245Z,1520522235.245 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 151
2018-03-08T15:17:15.245Z,1520522235.245 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T15:17:15.247Z,1520522235.247 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:15.247Z,1520522235.247 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 151
2018-03-08T15:17:15.247Z,1520522235.247 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T15:17:15.275Z,1520522235.275 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T15:17:15.275Z,1520522235.275 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T15:17:15.275Z,1520522235.275 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T15:17:15.657Z,1520522235.657 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T15:17:15.657Z,1520522235.657 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 151
2018-03-08T15:17:15.657Z,1520522235.657 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T15:17:15.657Z,1520522235.657 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 151
2018-03-08T15:17:15.658Z,1520522235.658 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T15:17:15.658Z,1520522235.658 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 151
2018-03-08T15:17:16.054Z,1520522236.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T15:17:16.054Z,1520522236.054 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:17:16.054Z,1520522236.054 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:17:16.055Z,1520522236.055 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T15:17:16.055Z,1520522236.055 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:17:16.055Z,1520522236.055 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:17:16.056Z,1520522236.056 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T15:17:16.056Z,1520522236.056 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:17:16.057Z,1520522236.057 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:17:16.459Z,1520522236.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T15:17:16.459Z,1520522236.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:16.859Z,1520522236.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T15:17:16.860Z,1520522236.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:17.247Z,1520522237.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T15:17:17.248Z,1520522237.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:17.651Z,1520522237.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T15:17:17.652Z,1520522237.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:18.045Z,1520522238.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T15:17:18.046Z,1520522238.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:18.462Z,1520522238.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T15:17:18.463Z,1520522238.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:18.866Z,1520522238.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T15:17:18.867Z,1520522238.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:19.258Z,1520522239.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T15:17:19.259Z,1520522239.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:19.658Z,1520522239.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T15:17:19.659Z,1520522239.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:20.054Z,1520522240.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T15:17:20.055Z,1520522240.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:20.458Z,1520522240.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T15:17:20.459Z,1520522240.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:20.850Z,1520522240.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T15:17:20.851Z,1520522240.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:21.260Z,1520522241.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T15:17:21.261Z,1520522241.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:21.657Z,1520522241.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T15:17:21.658Z,1520522241.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:22.056Z,1520522242.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T15:17:22.057Z,1520522242.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:22.451Z,1520522242.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T15:17:22.453Z,1520522242.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:22.845Z,1520522242.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T15:17:22.846Z,1520522242.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:23.256Z,1520522243.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T15:17:23.257Z,1520522243.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:23.654Z,1520522243.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T15:17:23.655Z,1520522243.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:24.057Z,1520522244.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T15:17:24.058Z,1520522244.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:24.466Z,1520522244.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T15:17:24.467Z,1520522244.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:24.861Z,1520522244.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T15:17:24.862Z,1520522244.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:25.263Z,1520522245.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T15:17:25.264Z,1520522245.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:25.665Z,1520522245.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T15:17:25.666Z,1520522245.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:26.038Z,1520522246.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T15:17:26.039Z,1520522246.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:26.462Z,1520522246.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T15:17:26.463Z,1520522246.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:26.869Z,1520522246.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T15:17:26.870Z,1520522246.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:27.264Z,1520522247.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T15:17:27.265Z,1520522247.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:27.667Z,1520522247.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T15:17:27.668Z,1520522247.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:28.067Z,1520522248.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T15:17:28.068Z,1520522248.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:28.445Z,1520522248.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T15:17:28.446Z,1520522248.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:28.845Z,1520522248.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T15:17:28.846Z,1520522248.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:29.245Z,1520522249.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T15:17:29.246Z,1520522249.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:29.643Z,1520522249.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T15:17:29.644Z,1520522249.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:30.071Z,1520522250.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T15:17:30.072Z,1520522250.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:30.468Z,1520522250.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T15:17:30.469Z,1520522250.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:30.872Z,1520522250.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T15:17:30.873Z,1520522250.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:31.291Z,1520522251.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T15:17:31.292Z,1520522251.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:31.646Z,1520522251.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T15:17:31.647Z,1520522251.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:32.054Z,1520522252.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T15:17:32.055Z,1520522252.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:32.459Z,1520522252.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T15:17:32.477Z,1520522252.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:32.852Z,1520522252.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T15:17:32.853Z,1520522252.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:33.244Z,1520522253.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T15:17:33.245Z,1520522253.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:33.646Z,1520522253.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T15:17:33.647Z,1520522253.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:34.054Z,1520522254.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T15:17:34.055Z,1520522254.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:34.458Z,1520522254.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T15:17:34.459Z,1520522254.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:34.855Z,1520522254.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T15:17:34.857Z,1520522254.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:35.256Z,1520522255.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:35.644Z,1520522255.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:36.047Z,1520522256.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:36.447Z,1520522256.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:36.844Z,1520522256.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:37.255Z,1520522257.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:37.656Z,1520522257.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:38.053Z,1520522258.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:41.144Z,1520522261.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:41.290Z,1520522261.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:41.632Z,1520522261.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:42.039Z,1520522262.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:42.431Z,1520522262.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:42.810Z,1520522262.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:43.210Z,1520522263.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:43.608Z,1520522263.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:44.035Z,1520522264.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:44.441Z,1520522264.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:44.820Z,1520522264.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:45.250Z,1520522265.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:45.615Z,1520522265.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:46.013Z,1520522266.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:46.418Z,1520522266.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:46.814Z,1520522266.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:47.217Z,1520522267.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:47.637Z,1520522267.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:48.028Z,1520522268.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:48.409Z,1520522268.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:48.813Z,1520522268.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:49.214Z,1520522269.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:49.612Z,1520522269.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:50.014Z,1520522270.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:50.446Z,1520522270.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:50.818Z,1520522270.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:51.228Z,1520522271.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:51.616Z,1520522271.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:52.017Z,1520522272.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:52.414Z,1520522272.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:52.814Z,1520522272.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:53.227Z,1520522273.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:53.624Z,1520522273.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:54.023Z,1520522274.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:54.423Z,1520522274.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:54.822Z,1520522274.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:55.220Z,1520522275.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:55.611Z,1520522275.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:56.019Z,1520522276.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:56.434Z,1520522276.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:56.824Z,1520522276.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:57.225Z,1520522277.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:57.622Z,1520522277.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:58.023Z,1520522278.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:58.414Z,1520522278.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:58.816Z,1520522278.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:59.221Z,1520522279.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:17:59.628Z,1520522279.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:00.029Z,1520522280.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:00.422Z,1520522280.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:00.818Z,1520522280.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:01.217Z,1520522281.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:01.618Z,1520522281.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:02.020Z,1520522282.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:02.427Z,1520522282.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:02.825Z,1520522282.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:03.224Z,1520522283.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:03.622Z,1520522283.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:04.022Z,1520522284.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:04.422Z,1520522284.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:04.823Z,1520522284.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:05.234Z,1520522285.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:05.634Z,1520522285.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:06.028Z,1520522286.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:06.426Z,1520522286.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:06.807Z,1520522286.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:07.232Z,1520522287.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:07.631Z,1520522287.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:08.034Z,1520522288.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:08.435Z,1520522288.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:08.835Z,1520522288.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:09.231Z,1520522289.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:09.630Z,1520522289.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:10.008Z,1520522290.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:10.404Z,1520522290.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:10.833Z,1520522290.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:11.239Z,1520522291.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:11.641Z,1520522291.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:12.043Z,1520522292.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:12.418Z,1520522292.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:12.818Z,1520522292.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:13.210Z,1520522293.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:13.617Z,1520522293.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:14.013Z,1520522294.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:14.420Z,1520522294.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:14.842Z,1520522294.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:15.244Z,1520522295.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:15.615Z,1520522295.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:16.014Z,1520522296.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:16.422Z,1520522296.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:16.814Z,1520522296.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:17.248Z,1520522297.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:17.620Z,1520522297.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:18.028Z,1520522298.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:18.415Z,1520522298.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:18.813Z,1520522298.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:19.214Z,1520522299.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:19.615Z,1520522299.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:20.013Z,1520522300.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:20.428Z,1520522300.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:20.818Z,1520522300.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:21.228Z,1520522301.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:21.613Z,1520522301.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:22.013Z,1520522302.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:22.447Z,1520522302.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:22.813Z,1520522302.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:23.221Z,1520522303.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:23.626Z,1520522303.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:24.023Z,1520522304.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:24.422Z,1520522304.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:24.822Z,1520522304.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:25.273Z,1520522305.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:25.622Z,1520522305.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:26.023Z,1520522306.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:26.422Z,1520522306.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:26.826Z,1520522306.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:27.216Z,1520522307.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:27.614Z,1520522307.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:28.016Z,1520522308.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:28.442Z,1520522308.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:28.823Z,1520522308.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:29.224Z,1520522309.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:29.614Z,1520522309.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:30.014Z,1520522310.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:30.415Z,1520522310.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:30.815Z,1520522310.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:31.228Z,1520522311.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:31.628Z,1520522311.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:32.023Z,1520522312.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:32.417Z,1520522312.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:32.822Z,1520522312.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:33.217Z,1520522313.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:33.618Z,1520522313.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:34.017Z,1520522314.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:34.422Z,1520522314.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:34.824Z,1520522314.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:35.220Z,1520522315.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:35.622Z,1520522315.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:36.016Z,1520522316.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:36.422Z,1520522316.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:36.818Z,1520522316.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:37.221Z,1520522317.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:37.624Z,1520522317.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:38.021Z,1520522318.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:38.416Z,1520522318.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:41.523Z,1520522321.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:41.658Z,1520522321.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:42.055Z,1520522322.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:42.428Z,1520522322.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:42.855Z,1520522322.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:43.225Z,1520522323.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:43.631Z,1520522323.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:44.025Z,1520522324.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:44.432Z,1520522324.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:44.828Z,1520522324.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:45.228Z,1520522325.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:45.626Z,1520522325.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:46.022Z,1520522326.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:46.430Z,1520522326.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:46.827Z,1520522326.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:47.228Z,1520522327.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:47.628Z,1520522327.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:48.028Z,1520522328.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:48.427Z,1520522328.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:48.830Z,1520522328.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:49.224Z,1520522329.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:49.621Z,1520522329.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:50.022Z,1520522330.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:50.429Z,1520522330.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:50.831Z,1520522330.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:51.229Z,1520522331.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:51.626Z,1520522331.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:52.020Z,1520522332.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:52.425Z,1520522332.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:52.825Z,1520522332.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:53.228Z,1520522333.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:53.633Z,1520522333.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:54.035Z,1520522334.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:54.419Z,1520522334.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:54.820Z,1520522334.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:55.225Z,1520522335.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:55.619Z,1520522335.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:56.030Z,1520522336.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:56.428Z,1520522336.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:56.830Z,1520522336.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:57.257Z,1520522337.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:57.621Z,1520522337.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:58.022Z,1520522338.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:58.426Z,1520522338.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:58.826Z,1520522338.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:59.231Z,1520522339.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:18:59.632Z,1520522339.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:00.031Z,1520522340.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:00.430Z,1520522340.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:00.830Z,1520522340.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:01.230Z,1520522341.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:01.616Z,1520522341.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:02.020Z,1520522342.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:02.431Z,1520522342.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:02.833Z,1520522342.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:03.258Z,1520522343.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:03.622Z,1520522343.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:04.019Z,1520522344.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:04.426Z,1520522344.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:04.833Z,1520522344.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:05.237Z,1520522345.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:05.642Z,1520522345.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:06.036Z,1520522346.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:06.430Z,1520522346.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:06.827Z,1520522346.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:07.230Z,1520522347.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:07.629Z,1520522347.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:08.027Z,1520522348.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:08.432Z,1520522348.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:08.839Z,1520522348.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:09.236Z,1520522349.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:09.625Z,1520522349.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:10.029Z,1520522350.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:10.424Z,1520522350.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:10.825Z,1520522350.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:11.233Z,1520522351.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:11.636Z,1520522351.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:12.029Z,1520522352.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:12.427Z,1520522352.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:12.826Z,1520522352.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:13.230Z,1520522353.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:13.619Z,1520522353.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:14.028Z,1520522354.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:14.439Z,1520522354.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:14.840Z,1520522354.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:15.240Z,1520522355.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:15.638Z,1520522355.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:16.007Z,1520522356.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:16.430Z,1520522356.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:16.841Z,1520522356.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:17.237Z,1520522357.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:17.646Z,1520522357.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:18.043Z,1520522358.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:18.438Z,1520522358.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:18.842Z,1520522358.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:19.222Z,1520522359.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:19.614Z,1520522359.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:20.019Z,1520522360.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:20.450Z,1520522360.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:20.828Z,1520522360.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:21.228Z,1520522361.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:21.618Z,1520522361.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:22.021Z,1520522362.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:22.423Z,1520522362.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:22.817Z,1520522362.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:23.246Z,1520522363.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:23.632Z,1520522363.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:24.052Z,1520522364.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:24.421Z,1520522364.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:24.824Z,1520522364.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:25.223Z,1520522365.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:25.618Z,1520522365.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:26.030Z,1520522366.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:26.432Z,1520522366.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:26.834Z,1520522366.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:27.238Z,1520522367.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:27.625Z,1520522367.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:28.020Z,1520522368.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:28.423Z,1520522368.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:28.823Z,1520522368.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:29.232Z,1520522369.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:29.632Z,1520522369.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:30.032Z,1520522370.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:30.430Z,1520522370.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:30.826Z,1520522370.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:31.222Z,1520522371.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:31.626Z,1520522371.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:32.021Z,1520522372.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:32.432Z,1520522372.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:32.833Z,1520522372.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:33.235Z,1520522373.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:33.634Z,1520522373.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:34.024Z,1520522374.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:34.426Z,1520522374.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:34.821Z,1520522374.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:35.231Z,1520522375.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:35.632Z,1520522375.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:36.031Z,1520522376.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:36.426Z,1520522376.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:36.821Z,1520522376.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:37.222Z,1520522377.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:37.225Z,1520522377.225 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T15:14:36.9Z
2018-03-08T15:19:37.225Z,1520522377.225 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T15:19:37.226Z,1520522377.226 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T15:19:37.619Z,1520522377.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:38.138Z,1520522378.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:38.436Z,1520522378.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:41.577Z,1520522381.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:41.754Z,1520522381.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:42.005Z,1520522382.005 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20180308T074127/Courier0176.lzma
2018-03-08T15:19:42.040Z,1520522382.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:42.440Z,1520522382.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:42.803Z,1520522382.803 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0176.lzma.bak
2018-03-08T15:19:42.803Z,1520522382.803 [DataOverHttps](INFO): SBD MOMSN=7986815
2018-03-08T15:19:42.861Z,1520522382.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:43.458Z,1520522383.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:43.679Z,1520522383.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:44.058Z,1520522384.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:47.148Z,1520522387.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:47.286Z,1520522387.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:47.636Z,1520522387.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:48.042Z,1520522388.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:48.432Z,1520522388.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:48.819Z,1520522388.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:49.222Z,1520522389.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:52.319Z,1520522392.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:52.455Z,1520522392.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:52.769Z,1520522392.769 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0177.lzma
2018-03-08T15:19:52.849Z,1520522392.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:53.216Z,1520522393.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:53.567Z,1520522393.567 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0177.lzma.bak
2018-03-08T15:19:53.567Z,1520522393.567 [DataOverHttps](INFO): SBD MOMSN=7986819
2018-03-08T15:19:53.643Z,1520522393.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:54.198Z,1520522394.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:54.201Z,1520522394.201 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T15:19:54.201Z,1520522394.201 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T15:19:54.201Z,1520522394.201 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T15:19:54.426Z,1520522394.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:57.514Z,1520522397.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:57.670Z,1520522397.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:58.030Z,1520522398.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:58.420Z,1520522398.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:58.807Z,1520522398.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:59.207Z,1520522399.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:19:59.611Z,1520522399.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:00.007Z,1520522400.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:00.417Z,1520522400.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:00.814Z,1520522400.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:01.214Z,1520522401.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:01.610Z,1520522401.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:02.018Z,1520522402.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:02.409Z,1520522402.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:02.813Z,1520522402.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:03.219Z,1520522403.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:03.618Z,1520522403.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:04.019Z,1520522404.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:04.410Z,1520522404.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:04.818Z,1520522404.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:05.194Z,1520522405.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:05.598Z,1520522405.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:05.995Z,1520522405.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:06.423Z,1520522406.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:06.826Z,1520522406.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:07.206Z,1520522407.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:07.606Z,1520522407.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:07.999Z,1520522407.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:08.400Z,1520522408.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:08.801Z,1520522408.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:09.231Z,1520522409.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:09.604Z,1520522409.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:10.008Z,1520522410.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:10.402Z,1520522410.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:10.803Z,1520522410.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:11.204Z,1520522411.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:11.603Z,1520522411.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:11.999Z,1520522411.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:12.412Z,1520522412.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:12.816Z,1520522412.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:13.207Z,1520522413.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:13.606Z,1520522413.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:14.002Z,1520522414.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:14.399Z,1520522414.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:14.803Z,1520522414.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:15.215Z,1520522415.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:15.606Z,1520522415.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:16.005Z,1520522416.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:16.402Z,1520522416.402 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:16.402Z,1520522416.402 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 152
2018-03-08T15:20:16.402Z,1520522416.402 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T15:20:16.404Z,1520522416.404 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:16.404Z,1520522416.404 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 152
2018-03-08T15:20:16.404Z,1520522416.404 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T15:20:16.406Z,1520522416.406 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:16.406Z,1520522416.406 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 152
2018-03-08T15:20:16.406Z,1520522416.406 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T15:20:16.443Z,1520522416.443 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T15:20:16.443Z,1520522416.443 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T15:20:16.443Z,1520522416.443 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T15:20:16.848Z,1520522416.848 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T15:20:16.848Z,1520522416.848 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 152
2018-03-08T15:20:16.849Z,1520522416.849 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T15:20:16.849Z,1520522416.849 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 152
2018-03-08T15:20:16.849Z,1520522416.849 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T15:20:16.849Z,1520522416.849 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 152
2018-03-08T15:20:17.194Z,1520522417.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T15:20:17.194Z,1520522417.194 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:20:17.195Z,1520522417.195 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:20:17.195Z,1520522417.195 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T15:20:17.195Z,1520522417.195 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:20:17.196Z,1520522417.196 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:20:17.196Z,1520522417.196 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T15:20:17.197Z,1520522417.197 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:20:17.197Z,1520522417.197 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:20:17.597Z,1520522417.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T15:20:17.598Z,1520522417.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:17.987Z,1520522417.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T15:20:17.988Z,1520522417.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:18.407Z,1520522418.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T15:20:18.409Z,1520522418.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:18.814Z,1520522418.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T15:20:18.815Z,1520522418.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:19.200Z,1520522419.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T15:20:19.201Z,1520522419.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:19.627Z,1520522419.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T15:20:19.628Z,1520522419.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:19.994Z,1520522419.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T15:20:19.995Z,1520522419.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:20.398Z,1520522420.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T15:20:20.399Z,1520522420.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:20.795Z,1520522420.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T15:20:20.796Z,1520522420.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:21.208Z,1520522421.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T15:20:21.209Z,1520522421.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:21.618Z,1520522421.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T15:20:21.618Z,1520522421.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:22.037Z,1520522422.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T15:20:22.038Z,1520522422.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:22.401Z,1520522422.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T15:20:22.402Z,1520522422.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:22.810Z,1520522422.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T15:20:22.811Z,1520522422.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:23.210Z,1520522423.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T15:20:23.211Z,1520522423.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:23.603Z,1520522423.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T15:20:23.604Z,1520522423.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:23.000Z,1520522424.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T15:20:24.001Z,1520522424.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:24.437Z,1520522424.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T15:20:24.438Z,1520522424.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:24.818Z,1520522424.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T15:20:24.819Z,1520522424.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:25.226Z,1520522425.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T15:20:25.227Z,1520522425.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:25.606Z,1520522425.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T15:20:25.607Z,1520522425.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:26.004Z,1520522426.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T15:20:26.005Z,1520522426.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:26.408Z,1520522426.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T15:20:26.409Z,1520522426.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:26.810Z,1520522426.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T15:20:26.811Z,1520522426.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:27.211Z,1520522427.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T15:20:27.212Z,1520522427.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:27.613Z,1520522427.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T15:20:27.614Z,1520522427.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:28.016Z,1520522428.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T15:20:28.017Z,1520522428.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:28.406Z,1520522428.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T15:20:28.407Z,1520522428.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:28.803Z,1520522428.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T15:20:28.804Z,1520522428.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:29.206Z,1520522429.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T15:20:29.207Z,1520522429.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:29.610Z,1520522429.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T15:20:29.611Z,1520522429.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:29.999Z,1520522429.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T15:20:29.000Z,1520522430.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:30.419Z,1520522430.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T15:20:30.420Z,1520522430.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:30.823Z,1520522430.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T15:20:30.824Z,1520522430.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:31.214Z,1520522431.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T15:20:31.215Z,1520522431.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:31.612Z,1520522431.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T15:20:31.613Z,1520522431.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:31.992Z,1520522431.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T15:20:32.016Z,1520522432.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:32.391Z,1520522432.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T15:20:32.392Z,1520522432.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:32.816Z,1520522432.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T15:20:32.817Z,1520522432.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:33.216Z,1520522433.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T15:20:33.217Z,1520522433.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:33.614Z,1520522433.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T15:20:33.615Z,1520522433.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:34.014Z,1520522434.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T15:20:34.015Z,1520522434.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:34.393Z,1520522434.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T15:20:34.394Z,1520522434.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:34.798Z,1520522434.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T15:20:34.799Z,1520522434.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:35.226Z,1520522435.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T15:20:35.227Z,1520522435.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:35.598Z,1520522435.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T15:20:35.599Z,1520522435.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:35.995Z,1520522435.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T15:20:35.996Z,1520522435.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:36.434Z,1520522436.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:36.819Z,1520522436.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:37.200Z,1520522437.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:37.623Z,1520522437.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:37.995Z,1520522437.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:38.400Z,1520522438.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:38.807Z,1520522438.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:39.212Z,1520522439.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:39.604Z,1520522439.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:40.031Z,1520522440.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:40.403Z,1520522440.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:40.803Z,1520522440.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:41.210Z,1520522441.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:41.607Z,1520522441.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:41.999Z,1520522441.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:42.409Z,1520522442.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:42.813Z,1520522442.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:43.209Z,1520522443.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:43.607Z,1520522443.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:44.003Z,1520522444.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:44.399Z,1520522444.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:44.811Z,1520522444.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:45.208Z,1520522445.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:45.616Z,1520522445.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:46.011Z,1520522446.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:46.406Z,1520522446.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:46.811Z,1520522446.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:47.211Z,1520522447.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:47.608Z,1520522447.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:48.002Z,1520522448.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:48.412Z,1520522448.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:48.812Z,1520522448.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:49.228Z,1520522449.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:49.611Z,1520522449.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:50.006Z,1520522450.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:50.400Z,1520522450.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:50.804Z,1520522450.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:51.216Z,1520522451.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:51.609Z,1520522451.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:52.015Z,1520522452.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:52.407Z,1520522452.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:52.811Z,1520522452.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:53.203Z,1520522453.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:53.601Z,1520522453.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:54.003Z,1520522454.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:54.422Z,1520522454.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:54.819Z,1520522454.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:57.950Z,1520522457.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:58.066Z,1520522458.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:58.427Z,1520522458.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:58.825Z,1520522458.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:59.227Z,1520522459.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:20:59.626Z,1520522459.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:00.025Z,1520522460.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:00.430Z,1520522460.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:00.832Z,1520522460.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:01.261Z,1520522461.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:01.625Z,1520522461.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:02.023Z,1520522462.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:02.426Z,1520522462.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:02.825Z,1520522462.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:03.233Z,1520522463.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:03.632Z,1520522463.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:04.034Z,1520522464.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:04.427Z,1520522464.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:04.819Z,1520522464.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:05.225Z,1520522465.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:05.630Z,1520522465.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:06.026Z,1520522466.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:06.428Z,1520522466.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:06.837Z,1520522466.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:07.241Z,1520522467.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:07.626Z,1520522467.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:08.031Z,1520522468.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:08.430Z,1520522468.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:08.833Z,1520522468.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:09.238Z,1520522469.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:09.641Z,1520522469.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:10.034Z,1520522470.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:10.426Z,1520522470.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:10.838Z,1520522470.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:11.213Z,1520522471.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:11.638Z,1520522471.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:12.042Z,1520522472.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:12.426Z,1520522472.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:12.846Z,1520522472.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:13.226Z,1520522473.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:13.622Z,1520522473.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:14.026Z,1520522474.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:14.423Z,1520522474.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:14.822Z,1520522474.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:15.251Z,1520522475.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:15.651Z,1520522475.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:16.026Z,1520522476.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:16.419Z,1520522476.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:16.823Z,1520522476.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:17.250Z,1520522477.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:17.625Z,1520522477.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:18.022Z,1520522478.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:18.436Z,1520522478.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:18.828Z,1520522478.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:19.228Z,1520522479.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:19.626Z,1520522479.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:20.026Z,1520522480.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:20.429Z,1520522480.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:20.818Z,1520522480.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:21.240Z,1520522481.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:21.632Z,1520522481.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:22.032Z,1520522482.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:22.429Z,1520522482.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:22.827Z,1520522482.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:23.219Z,1520522483.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:23.624Z,1520522483.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:24.030Z,1520522484.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:24.437Z,1520522484.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:24.836Z,1520522484.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:25.236Z,1520522485.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:25.627Z,1520522485.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:26.026Z,1520522486.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:26.423Z,1520522486.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:26.825Z,1520522486.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:27.238Z,1520522487.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:27.639Z,1520522487.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:28.036Z,1520522488.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:28.430Z,1520522488.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:28.826Z,1520522488.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:29.225Z,1520522489.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:29.627Z,1520522489.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:30.029Z,1520522490.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:30.430Z,1520522490.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:30.842Z,1520522490.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:31.236Z,1520522491.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:31.622Z,1520522491.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:32.031Z,1520522492.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:32.434Z,1520522492.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:32.833Z,1520522492.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:33.246Z,1520522493.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:33.643Z,1520522493.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:34.036Z,1520522494.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:34.445Z,1520522494.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:34.811Z,1520522494.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:35.221Z,1520522495.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:35.626Z,1520522495.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:36.027Z,1520522496.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:36.432Z,1520522496.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:36.835Z,1520522496.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:37.253Z,1520522497.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:37.625Z,1520522497.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:38.026Z,1520522498.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:38.425Z,1520522498.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:38.818Z,1520522498.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:39.234Z,1520522499.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:39.631Z,1520522499.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:40.028Z,1520522500.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:40.425Z,1520522500.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:40.823Z,1520522500.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:41.224Z,1520522501.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:41.627Z,1520522501.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:42.025Z,1520522502.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:42.428Z,1520522502.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:42.838Z,1520522502.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:43.229Z,1520522503.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:43.625Z,1520522503.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:44.026Z,1520522504.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:44.430Z,1520522504.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:44.824Z,1520522504.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:45.234Z,1520522505.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:45.633Z,1520522505.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:46.028Z,1520522506.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:46.425Z,1520522506.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:46.826Z,1520522506.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:47.224Z,1520522507.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:47.622Z,1520522507.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:48.026Z,1520522508.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:48.429Z,1520522508.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:48.834Z,1520522508.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:49.229Z,1520522509.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:49.624Z,1520522509.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:50.026Z,1520522510.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:50.426Z,1520522510.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:50.824Z,1520522510.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:51.228Z,1520522511.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:51.269Z,1520522511.269 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T15:21:51.633Z,1520522511.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:52.028Z,1520522512.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:52.425Z,1520522512.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:52.825Z,1520522512.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:53.230Z,1520522513.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:53.630Z,1520522513.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:54.024Z,1520522514.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:54.434Z,1520522514.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:54.838Z,1520522514.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:57.966Z,1520522517.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:58.106Z,1520522518.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:58.457Z,1520522518.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:58.842Z,1520522518.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:59.242Z,1520522519.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:21:59.642Z,1520522519.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:00.037Z,1520522520.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:00.466Z,1520522520.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:00.848Z,1520522520.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:01.269Z,1520522521.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:01.639Z,1520522521.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:02.046Z,1520522522.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:02.445Z,1520522522.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:02.836Z,1520522522.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:03.260Z,1520522523.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:03.652Z,1520522523.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:04.058Z,1520522524.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:04.444Z,1520522524.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:04.839Z,1520522524.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:05.245Z,1520522525.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:05.648Z,1520522525.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:06.046Z,1520522526.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:06.447Z,1520522526.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:06.857Z,1520522526.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:07.254Z,1520522527.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:07.644Z,1520522527.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:08.045Z,1520522528.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:08.442Z,1520522528.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:08.842Z,1520522528.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:09.248Z,1520522529.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:09.656Z,1520522529.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:10.052Z,1520522530.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:10.445Z,1520522530.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:10.862Z,1520522530.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:11.250Z,1520522531.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:11.647Z,1520522531.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:12.044Z,1520522532.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:12.452Z,1520522532.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:12.852Z,1520522532.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:13.250Z,1520522533.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:13.644Z,1520522533.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:14.046Z,1520522534.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:14.450Z,1520522534.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:14.846Z,1520522534.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:15.250Z,1520522535.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:15.651Z,1520522535.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:16.052Z,1520522536.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:16.442Z,1520522536.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:16.856Z,1520522536.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:17.227Z,1520522537.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:17.650Z,1520522537.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:18.033Z,1520522538.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:18.455Z,1520522538.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:18.866Z,1520522538.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:19.259Z,1520522539.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:19.654Z,1520522539.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:20.059Z,1520522540.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:20.438Z,1520522540.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:20.838Z,1520522540.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:21.264Z,1520522541.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:21.666Z,1520522541.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:22.044Z,1520522542.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:22.439Z,1520522542.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:22.838Z,1520522542.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:23.236Z,1520522543.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:23.639Z,1520522543.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:24.038Z,1520522544.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:24.465Z,1520522544.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:24.852Z,1520522544.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:25.274Z,1520522545.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:25.642Z,1520522545.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:26.039Z,1520522546.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:26.439Z,1520522546.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:26.838Z,1520522546.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:27.241Z,1520522547.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:27.652Z,1520522547.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:28.044Z,1520522548.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:28.439Z,1520522548.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:28.839Z,1520522548.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:29.242Z,1520522549.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:29.639Z,1520522549.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:30.038Z,1520522550.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:30.452Z,1520522550.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:30.848Z,1520522550.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:31.244Z,1520522551.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:31.641Z,1520522551.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:32.037Z,1520522552.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:32.441Z,1520522552.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:32.839Z,1520522552.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:33.243Z,1520522553.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:33.648Z,1520522553.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:34.045Z,1520522554.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:34.441Z,1520522554.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:34.836Z,1520522554.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:35.239Z,1520522555.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:35.639Z,1520522555.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:36.041Z,1520522556.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:36.445Z,1520522556.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:36.850Z,1520522556.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:37.244Z,1520522557.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:37.642Z,1520522557.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:38.041Z,1520522558.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:38.436Z,1520522558.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:38.842Z,1520522558.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:39.243Z,1520522559.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:39.648Z,1520522559.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:40.045Z,1520522560.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:40.442Z,1520522560.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:40.844Z,1520522560.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:41.237Z,1520522561.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:41.645Z,1520522561.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:42.041Z,1520522562.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:42.449Z,1520522562.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:42.854Z,1520522562.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:43.249Z,1520522563.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:43.638Z,1520522563.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:44.046Z,1520522564.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:44.445Z,1520522564.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:44.843Z,1520522564.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:45.247Z,1520522565.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:45.674Z,1520522565.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:46.047Z,1520522566.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:46.447Z,1520522566.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:46.842Z,1520522566.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:47.239Z,1520522567.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:47.642Z,1520522567.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:48.042Z,1520522568.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:48.444Z,1520522568.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:48.851Z,1520522568.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:49.253Z,1520522569.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:49.635Z,1520522569.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:50.046Z,1520522570.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:50.442Z,1520522570.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:50.901Z,1520522570.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:51.249Z,1520522571.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:51.659Z,1520522571.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:52.044Z,1520522572.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:52.442Z,1520522572.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:52.841Z,1520522572.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:53.229Z,1520522573.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:53.642Z,1520522573.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:54.034Z,1520522574.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:54.437Z,1520522574.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:54.848Z,1520522574.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:57.984Z,1520522577.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:58.119Z,1520522578.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:58.466Z,1520522578.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:58.868Z,1520522578.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:59.266Z,1520522579.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:22:59.666Z,1520522579.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:00.071Z,1520522580.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:00.473Z,1520522580.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:00.874Z,1520522580.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:01.258Z,1520522581.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:01.644Z,1520522581.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:02.049Z,1520522582.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:02.476Z,1520522582.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:02.873Z,1520522582.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:03.272Z,1520522583.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:03.650Z,1520522583.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:04.046Z,1520522584.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:04.454Z,1520522584.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:04.854Z,1520522584.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:05.253Z,1520522585.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:05.680Z,1520522585.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:06.082Z,1520522586.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:06.458Z,1520522586.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:06.855Z,1520522586.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:07.250Z,1520522587.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:07.648Z,1520522587.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:08.082Z,1520522588.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:08.462Z,1520522588.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:08.864Z,1520522588.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:09.255Z,1520522589.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:09.655Z,1520522589.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:10.058Z,1520522590.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:10.468Z,1520522590.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:10.860Z,1520522590.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:11.252Z,1520522591.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:11.655Z,1520522591.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:12.057Z,1520522592.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:12.474Z,1520522592.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:12.874Z,1520522592.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:13.278Z,1520522593.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:13.646Z,1520522593.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:14.070Z,1520522594.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:14.486Z,1520522594.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:14.854Z,1520522594.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:15.267Z,1520522595.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:15.670Z,1520522595.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:16.062Z,1520522596.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:16.459Z,1520522596.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:16.841Z,1520522596.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:17.251Z,1520522597.251 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:17.251Z,1520522597.251 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 153
2018-03-08T15:23:17.251Z,1520522597.251 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T15:23:17.253Z,1520522597.253 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:17.253Z,1520522597.253 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 153
2018-03-08T15:23:17.253Z,1520522597.253 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T15:23:17.254Z,1520522597.254 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:17.255Z,1520522597.255 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 153
2018-03-08T15:23:17.255Z,1520522597.255 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T15:23:17.287Z,1520522597.287 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T15:23:17.287Z,1520522597.287 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T15:23:17.287Z,1520522597.287 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T15:23:17.705Z,1520522597.705 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T15:23:17.705Z,1520522597.705 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 153
2018-03-08T15:23:17.706Z,1520522597.706 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T15:23:17.706Z,1520522597.706 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 153
2018-03-08T15:23:17.706Z,1520522597.706 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T15:23:17.707Z,1520522597.707 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 153
2018-03-08T15:23:18.065Z,1520522598.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T15:23:18.066Z,1520522598.066 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:23:18.066Z,1520522598.066 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:23:18.066Z,1520522598.066 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T15:23:18.067Z,1520522598.067 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:23:18.067Z,1520522598.067 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:23:18.067Z,1520522598.067 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T15:23:18.068Z,1520522598.068 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:23:18.068Z,1520522598.068 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:23:18.478Z,1520522598.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T15:23:18.479Z,1520522598.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:18.874Z,1520522598.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T15:23:18.875Z,1520522598.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:19.262Z,1520522599.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T15:23:19.263Z,1520522599.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:19.661Z,1520522599.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T15:23:19.662Z,1520522599.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:20.065Z,1520522600.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T15:23:20.066Z,1520522600.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:20.469Z,1520522600.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T15:23:20.469Z,1520522600.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:20.866Z,1520522600.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T15:23:20.867Z,1520522600.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:21.265Z,1520522601.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T15:23:21.266Z,1520522601.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:21.658Z,1520522601.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T15:23:21.659Z,1520522601.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:22.048Z,1520522602.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T15:23:22.049Z,1520522602.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:22.465Z,1520522602.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T15:23:22.466Z,1520522602.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:22.866Z,1520522602.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T15:23:22.867Z,1520522602.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:23.268Z,1520522603.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T15:23:23.273Z,1520522603.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:23.665Z,1520522603.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T15:23:23.666Z,1520522603.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:24.066Z,1520522604.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T15:23:24.067Z,1520522604.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:24.443Z,1520522604.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T15:23:24.444Z,1520522604.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:24.870Z,1520522604.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T15:23:24.871Z,1520522604.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:25.268Z,1520522605.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T15:23:25.269Z,1520522605.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:25.667Z,1520522605.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T15:23:25.668Z,1520522605.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:26.067Z,1520522606.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T15:23:26.068Z,1520522606.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:26.473Z,1520522606.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T15:23:26.474Z,1520522606.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:26.868Z,1520522606.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T15:23:26.870Z,1520522606.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:27.244Z,1520522607.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T15:23:27.245Z,1520522607.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:27.649Z,1520522607.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T15:23:27.650Z,1520522607.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:28.040Z,1520522608.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T15:23:28.041Z,1520522608.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:28.470Z,1520522608.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T15:23:28.471Z,1520522608.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:28.876Z,1520522608.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T15:23:28.877Z,1520522608.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:29.252Z,1520522609.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T15:23:29.253Z,1520522609.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:29.658Z,1520522609.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T15:23:29.659Z,1520522609.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:30.054Z,1520522610.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T15:23:30.055Z,1520522610.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:30.450Z,1520522610.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T15:23:30.451Z,1520522610.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:30.855Z,1520522610.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T15:23:30.856Z,1520522610.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:31.263Z,1520522611.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T15:23:31.286Z,1520522611.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:31.652Z,1520522611.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T15:23:31.653Z,1520522611.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:32.064Z,1520522612.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T15:23:32.077Z,1520522612.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:32.453Z,1520522612.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T15:23:32.454Z,1520522612.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:32.855Z,1520522612.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T15:23:32.856Z,1520522612.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:33.257Z,1520522613.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T15:23:33.258Z,1520522613.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:33.655Z,1520522613.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T15:23:33.656Z,1520522613.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:34.050Z,1520522614.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T15:23:34.051Z,1520522614.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:34.456Z,1520522614.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T15:23:34.457Z,1520522614.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:34.868Z,1520522614.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T15:23:34.890Z,1520522614.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:35.258Z,1520522615.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T15:23:35.259Z,1520522615.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:35.654Z,1520522615.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T15:23:35.655Z,1520522615.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:36.053Z,1520522616.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T15:23:36.054Z,1520522616.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:36.462Z,1520522616.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T15:23:36.463Z,1520522616.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:36.852Z,1520522616.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T15:23:36.853Z,1520522616.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:37.291Z,1520522617.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:37.655Z,1520522617.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:38.068Z,1520522618.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:38.457Z,1520522618.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:38.857Z,1520522618.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:39.262Z,1520522619.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:39.657Z,1520522619.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:40.062Z,1520522620.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:40.464Z,1520522620.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:40.859Z,1520522620.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:41.251Z,1520522621.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:41.662Z,1520522621.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:42.062Z,1520522622.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:42.470Z,1520522622.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:42.871Z,1520522622.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:43.268Z,1520522623.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:43.657Z,1520522623.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:44.062Z,1520522624.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:44.459Z,1520522624.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:44.863Z,1520522624.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:45.267Z,1520522625.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:45.674Z,1520522625.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:46.061Z,1520522626.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:46.455Z,1520522626.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:46.856Z,1520522626.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:47.259Z,1520522627.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:47.655Z,1520522627.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:48.065Z,1520522628.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:48.464Z,1520522628.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:48.863Z,1520522628.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:49.260Z,1520522629.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:49.652Z,1520522629.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:50.067Z,1520522630.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:50.468Z,1520522630.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:50.860Z,1520522630.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:51.258Z,1520522631.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:51.658Z,1520522631.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:52.074Z,1520522632.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:52.467Z,1520522632.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:52.868Z,1520522632.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:53.263Z,1520522633.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:53.657Z,1520522633.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:54.066Z,1520522634.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:54.460Z,1520522634.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:54.867Z,1520522634.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:57.963Z,1520522637.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:58.099Z,1520522638.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:58.449Z,1520522638.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:58.828Z,1520522638.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:59.231Z,1520522639.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:23:59.652Z,1520522639.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:00.035Z,1520522640.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:00.462Z,1520522640.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:00.864Z,1520522640.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:01.263Z,1520522641.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:01.634Z,1520522641.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:02.035Z,1520522642.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:02.436Z,1520522642.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:02.828Z,1520522642.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:03.265Z,1520522643.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:03.669Z,1520522643.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:04.041Z,1520522644.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:04.434Z,1520522644.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:04.837Z,1520522644.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:05.237Z,1520522645.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:05.637Z,1520522645.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:06.037Z,1520522646.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:06.442Z,1520522646.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:06.844Z,1520522646.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:07.246Z,1520522647.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:07.637Z,1520522647.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:08.037Z,1520522648.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:08.438Z,1520522648.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:08.837Z,1520522648.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:09.239Z,1520522649.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:09.644Z,1520522649.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:10.041Z,1520522650.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:10.435Z,1520522650.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:10.838Z,1520522650.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:11.230Z,1520522651.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:11.630Z,1520522651.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:12.026Z,1520522652.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:12.451Z,1520522652.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:12.862Z,1520522652.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:13.251Z,1520522653.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:13.626Z,1520522653.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:14.035Z,1520522654.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:14.434Z,1520522654.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:14.831Z,1520522654.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:15.261Z,1520522655.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:15.661Z,1520522655.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:16.060Z,1520522656.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:16.435Z,1520522656.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:16.833Z,1520522656.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:17.226Z,1520522657.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:17.631Z,1520522657.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:18.034Z,1520522658.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:18.458Z,1520522658.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:18.855Z,1520522658.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:19.258Z,1520522659.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:19.630Z,1520522659.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:20.035Z,1520522660.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:20.431Z,1520522660.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:20.833Z,1520522660.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:21.254Z,1520522661.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:21.657Z,1520522661.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:22.053Z,1520522662.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:22.434Z,1520522662.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:22.835Z,1520522662.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:23.233Z,1520522663.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:23.633Z,1520522663.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:24.034Z,1520522664.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:24.465Z,1520522664.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:24.845Z,1520522664.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:25.246Z,1520522665.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:25.635Z,1520522665.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:26.037Z,1520522666.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:26.437Z,1520522666.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:26.837Z,1520522666.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:27.198Z,1520522667.198 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T15:24:27.198Z,1520522667.198 [NAL9602] Data Fault, FailCount= 3
2018-03-08T15:24:27.198Z,1520522667.198 [NAL9602](ERROR): Data Fault
2018-03-08T15:24:27.249Z,1520522667.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:27.271Z,1520522667.271 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T15:24:27.590Z,1520522667.590 [NAL9602](INFO): Powering down
2018-03-08T15:24:27.637Z,1520522667.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:28.037Z,1520522668.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:28.435Z,1520522668.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:28.448Z,1520522668.448 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T15:24:28.448Z,1520522668.448 [NAL9602] No Fault, FailCount= 3
2018-03-08T15:24:28.834Z,1520522668.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:29.233Z,1520522669.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:29.633Z,1520522669.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:30.028Z,1520522670.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:30.433Z,1520522670.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:30.840Z,1520522670.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:31.236Z,1520522671.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:31.638Z,1520522671.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:32.037Z,1520522672.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:32.434Z,1520522672.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:32.837Z,1520522672.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:33.235Z,1520522673.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:33.634Z,1520522673.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:34.037Z,1520522674.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:34.434Z,1520522674.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:34.829Z,1520522674.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:35.238Z,1520522675.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:35.642Z,1520522675.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:36.038Z,1520522676.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:36.437Z,1520522676.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:36.838Z,1520522676.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:37.235Z,1520522677.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:37.634Z,1520522677.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:38.077Z,1520522678.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:38.434Z,1520522678.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:38.844Z,1520522678.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:39.239Z,1520522679.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:39.660Z,1520522679.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:40.052Z,1520522680.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:40.447Z,1520522680.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:40.830Z,1520522680.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:41.220Z,1520522681.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:41.654Z,1520522681.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:42.034Z,1520522682.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:42.422Z,1520522682.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:42.834Z,1520522682.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:43.232Z,1520522683.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:43.625Z,1520522683.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:44.035Z,1520522684.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:44.429Z,1520522684.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:44.834Z,1520522684.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:45.234Z,1520522685.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:45.629Z,1520522685.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:46.030Z,1520522686.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:46.430Z,1520522686.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:46.834Z,1520522686.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:47.230Z,1520522687.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:47.634Z,1520522687.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:48.034Z,1520522688.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:48.434Z,1520522688.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:48.834Z,1520522688.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:49.231Z,1520522689.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:49.630Z,1520522689.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:50.041Z,1520522690.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:50.435Z,1520522690.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:50.837Z,1520522690.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:51.236Z,1520522691.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:51.636Z,1520522691.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:52.026Z,1520522692.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:52.439Z,1520522692.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:52.837Z,1520522692.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:53.232Z,1520522693.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:53.642Z,1520522693.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:54.035Z,1520522694.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:54.436Z,1520522694.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:54.834Z,1520522694.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:54.837Z,1520522694.837 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T15:24:54.837Z,1520522694.837 [Default:CheckIn:C.Wait] Stopped
2018-03-08T15:24:54.837Z,1520522694.837 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T15:24:54.837Z,1520522694.837 [Default:CheckIn:D] Running Loop=1
2018-03-08T15:24:55.229Z,1520522695.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:55.232Z,1520522695.232 [Default:CheckIn:D] Stopped
2018-03-08T15:24:55.232Z,1520522695.232 [Default:CheckIn:E] Running Loop=1
2018-03-08T15:24:58.305Z,1520522698.305 [NAL9602](INFO): Powering up NAL9602
2018-03-08T15:24:58.338Z,1520522698.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:58.341Z,1520522698.341 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 459.173763 min 
2018-03-08T15:24:58.341Z,1520522698.341 [Default:CheckIn:E] Stopped
2018-03-08T15:24:58.341Z,1520522698.341 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T15:24:58.341Z,1520522698.341 [Default:CheckIn] Stopped
2018-03-08T15:24:58.341Z,1520522698.341 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T15:24:58.342Z,1520522698.342 [Default:CheckIn](INFO): Running loop #45
2018-03-08T15:24:58.342Z,1520522698.342 [Default:CheckIn] Running Loop=45
2018-03-08T15:24:58.342Z,1520522698.342 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T15:24:58.342Z,1520522698.342 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T15:24:58.476Z,1520522698.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:58.834Z,1520522698.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:59.231Z,1520522699.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:24:59.635Z,1520522699.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:00.030Z,1520522700.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:00.429Z,1520522700.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:00.833Z,1520522700.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:01.225Z,1520522701.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:01.626Z,1520522701.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:02.031Z,1520522702.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:02.428Z,1520522702.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:02.830Z,1520522702.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:03.235Z,1520522703.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:03.625Z,1520522703.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:04.033Z,1520522704.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:04.435Z,1520522704.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:04.843Z,1520522704.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:05.220Z,1520522705.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:05.628Z,1520522705.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:06.035Z,1520522706.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:06.424Z,1520522706.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:06.828Z,1520522706.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:07.234Z,1520522707.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:07.624Z,1520522707.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:08.029Z,1520522708.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:08.425Z,1520522708.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:08.830Z,1520522708.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:09.190Z,1520522709.190 [NAL9602](INFO): NAL9602 initialized
2018-03-08T15:25:09.235Z,1520522709.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:09.629Z,1520522709.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:10.033Z,1520522710.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:10.443Z,1520522710.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:10.839Z,1520522710.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:11.229Z,1520522711.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:11.627Z,1520522711.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:12.028Z,1520522712.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:12.434Z,1520522712.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:12.839Z,1520522712.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:13.243Z,1520522713.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:13.629Z,1520522713.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:14.034Z,1520522714.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:14.426Z,1520522714.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:14.834Z,1520522714.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:15.247Z,1520522715.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:15.647Z,1520522715.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:16.041Z,1520522716.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:16.429Z,1520522716.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:16.838Z,1520522716.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:17.232Z,1520522717.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:17.628Z,1520522717.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:18.028Z,1520522718.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:18.435Z,1520522718.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:18.847Z,1520522718.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:19.240Z,1520522719.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:19.628Z,1520522719.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:20.032Z,1520522720.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:20.431Z,1520522720.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:20.827Z,1520522720.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:21.237Z,1520522721.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:21.642Z,1520522721.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:22.040Z,1520522722.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:22.434Z,1520522722.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:22.833Z,1520522722.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:23.229Z,1520522723.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:23.628Z,1520522723.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:24.033Z,1520522724.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:24.441Z,1520522724.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:24.847Z,1520522724.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:25.236Z,1520522725.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:25.629Z,1520522725.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:26.026Z,1520522726.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:26.428Z,1520522726.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:26.834Z,1520522726.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:27.233Z,1520522727.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:27.647Z,1520522727.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:28.041Z,1520522728.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:28.434Z,1520522728.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:28.833Z,1520522728.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:29.230Z,1520522729.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:29.628Z,1520522729.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:30.034Z,1520522730.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:30.433Z,1520522730.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:30.843Z,1520522730.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:31.243Z,1520522731.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:31.631Z,1520522731.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:32.033Z,1520522732.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:32.430Z,1520522732.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:32.831Z,1520522732.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:33.241Z,1520522733.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:33.641Z,1520522733.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:34.042Z,1520522734.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:34.434Z,1520522734.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:34.835Z,1520522734.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:35.239Z,1520522735.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:35.616Z,1520522735.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:36.041Z,1520522736.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:36.440Z,1520522736.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:36.845Z,1520522736.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:37.238Z,1520522737.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:37.617Z,1520522737.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:38.012Z,1520522738.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:38.438Z,1520522738.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:38.821Z,1520522738.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:39.242Z,1520522739.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:39.654Z,1520522739.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:40.048Z,1520522740.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:40.415Z,1520522740.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:40.843Z,1520522740.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:41.221Z,1520522741.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:41.619Z,1520522741.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:42.051Z,1520522742.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:42.446Z,1520522742.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:42.848Z,1520522742.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:43.245Z,1520522743.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:43.650Z,1520522743.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:44.015Z,1520522744.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:44.426Z,1520522744.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:44.818Z,1520522744.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:45.232Z,1520522745.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:45.655Z,1520522745.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:46.055Z,1520522746.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:46.419Z,1520522746.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:46.822Z,1520522746.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:47.225Z,1520522747.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:47.621Z,1520522747.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:48.024Z,1520522748.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:48.431Z,1520522748.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:48.824Z,1520522748.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:49.254Z,1520522749.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:49.627Z,1520522749.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:50.023Z,1520522750.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:50.427Z,1520522750.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:50.826Z,1520522750.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:51.229Z,1520522751.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:51.654Z,1520522751.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:52.057Z,1520522752.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:52.428Z,1520522752.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:52.827Z,1520522752.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:53.230Z,1520522753.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:53.634Z,1520522753.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:54.034Z,1520522754.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:54.440Z,1520522754.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:54.839Z,1520522754.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:55.259Z,1520522755.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:55.634Z,1520522755.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:58.727Z,1520522758.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:58.866Z,1520522758.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:59.237Z,1520522759.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:25:59.637Z,1520522759.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:00.065Z,1520522760.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:00.430Z,1520522760.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:00.829Z,1520522760.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:01.226Z,1520522761.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:01.626Z,1520522761.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:02.029Z,1520522762.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:02.435Z,1520522762.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:02.835Z,1520522762.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:03.236Z,1520522763.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:03.635Z,1520522763.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:04.029Z,1520522764.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:04.430Z,1520522764.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:04.828Z,1520522764.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:05.235Z,1520522765.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:05.631Z,1520522765.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:06.035Z,1520522766.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:06.429Z,1520522766.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:06.834Z,1520522766.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:07.229Z,1520522767.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:07.626Z,1520522767.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:08.023Z,1520522768.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:08.435Z,1520522768.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:08.835Z,1520522768.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:09.238Z,1520522769.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:09.634Z,1520522769.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:10.025Z,1520522770.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:10.430Z,1520522770.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:10.830Z,1520522770.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:11.235Z,1520522771.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:11.635Z,1520522771.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:12.038Z,1520522772.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:12.429Z,1520522772.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:12.835Z,1520522772.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:13.234Z,1520522773.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:13.630Z,1520522773.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:14.034Z,1520522774.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:14.439Z,1520522774.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:14.843Z,1520522774.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:15.238Z,1520522775.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:15.630Z,1520522775.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:16.034Z,1520522776.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:16.424Z,1520522776.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:16.824Z,1520522776.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:17.235Z,1520522777.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:17.636Z,1520522777.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:18.038Z,1520522778.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:18.430Z,1520522778.430 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:18.431Z,1520522778.431 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 154
2018-03-08T15:26:18.431Z,1520522778.431 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T15:26:18.433Z,1520522778.433 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:18.433Z,1520522778.433 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 154
2018-03-08T15:26:18.433Z,1520522778.433 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T15:26:18.434Z,1520522778.434 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:18.435Z,1520522778.434 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 154
2018-03-08T15:26:18.435Z,1520522778.435 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T15:26:18.446Z,1520522778.446 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T15:26:18.446Z,1520522778.446 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T15:26:18.446Z,1520522778.446 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T15:26:18.839Z,1520522778.839 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T15:26:18.839Z,1520522778.839 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 154
2018-03-08T15:26:18.839Z,1520522778.839 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T15:26:18.839Z,1520522778.839 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 154
2018-03-08T15:26:18.840Z,1520522778.840 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T15:26:18.840Z,1520522778.840 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 154
2018-03-08T15:26:19.233Z,1520522779.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T15:26:19.233Z,1520522779.233 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:26:19.233Z,1520522779.233 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:26:19.234Z,1520522779.234 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T15:26:19.234Z,1520522779.234 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:26:19.234Z,1520522779.234 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:26:19.235Z,1520522779.235 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T15:26:19.235Z,1520522779.235 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:26:19.235Z,1520522779.235 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:26:19.629Z,1520522779.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T15:26:19.630Z,1520522779.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:20.023Z,1520522780.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T15:26:20.024Z,1520522780.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:20.446Z,1520522780.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T15:26:20.447Z,1520522780.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:20.844Z,1520522780.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T15:26:20.845Z,1520522780.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:21.232Z,1520522781.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T15:26:21.233Z,1520522781.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:21.630Z,1520522781.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T15:26:21.631Z,1520522781.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:22.028Z,1520522782.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T15:26:22.029Z,1520522782.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:22.430Z,1520522782.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T15:26:22.431Z,1520522782.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:22.834Z,1520522782.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T15:26:22.835Z,1520522782.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:23.245Z,1520522783.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T15:26:23.246Z,1520522783.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:23.635Z,1520522783.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T15:26:23.637Z,1520522783.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:24.035Z,1520522784.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T15:26:24.036Z,1520522784.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:24.433Z,1520522784.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T15:26:24.434Z,1520522784.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:24.832Z,1520522784.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T15:26:24.833Z,1520522784.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:25.232Z,1520522785.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T15:26:25.233Z,1520522785.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:25.634Z,1520522785.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T15:26:25.635Z,1520522785.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:26.036Z,1520522786.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T15:26:26.037Z,1520522786.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:26.442Z,1520522786.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T15:26:26.443Z,1520522786.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:26.843Z,1520522786.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T15:26:26.844Z,1520522786.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:27.301Z,1520522787.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-08T15:26:27.302Z,1520522787.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:27.636Z,1520522787.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T15:26:27.637Z,1520522787.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:28.038Z,1520522788.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T15:26:28.039Z,1520522788.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:28.434Z,1520522788.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T15:26:28.435Z,1520522788.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:28.837Z,1520522788.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T15:26:28.838Z,1520522788.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:29.241Z,1520522789.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T15:26:29.242Z,1520522789.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:29.646Z,1520522789.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T15:26:29.647Z,1520522789.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:30.046Z,1520522790.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T15:26:30.047Z,1520522790.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:30.424Z,1520522790.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T15:26:30.433Z,1520522790.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:30.826Z,1520522790.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T15:26:30.827Z,1520522790.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:31.224Z,1520522791.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T15:26:31.225Z,1520522791.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:31.623Z,1520522791.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T15:26:31.624Z,1520522791.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:32.025Z,1520522792.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T15:26:32.026Z,1520522792.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:32.447Z,1520522792.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T15:26:32.448Z,1520522792.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:32.851Z,1520522792.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T15:26:32.852Z,1520522792.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:33.253Z,1520522793.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T15:26:33.254Z,1520522793.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:33.635Z,1520522793.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T15:26:33.636Z,1520522793.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:34.027Z,1520522794.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T15:26:34.028Z,1520522794.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:34.428Z,1520522794.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T15:26:34.429Z,1520522794.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:34.833Z,1520522794.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T15:26:34.834Z,1520522794.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:35.236Z,1520522795.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T15:26:35.237Z,1520522795.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:35.635Z,1520522795.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T15:26:35.636Z,1520522795.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:36.034Z,1520522796.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T15:26:36.035Z,1520522796.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:36.431Z,1520522796.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T15:26:36.432Z,1520522796.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:36.831Z,1520522796.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T15:26:36.832Z,1520522796.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:37.231Z,1520522797.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T15:26:37.233Z,1520522797.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:37.630Z,1520522797.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T15:26:37.631Z,1520522797.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:38.035Z,1520522798.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T15:26:38.036Z,1520522798.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:38.439Z,1520522798.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:38.835Z,1520522798.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:39.238Z,1520522799.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:39.631Z,1520522799.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:40.029Z,1520522800.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:40.430Z,1520522800.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:40.830Z,1520522800.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:41.235Z,1520522801.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:41.664Z,1520522801.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:42.038Z,1520522802.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:42.430Z,1520522802.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:42.835Z,1520522802.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:43.234Z,1520522803.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:43.631Z,1520522803.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:44.034Z,1520522804.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:44.435Z,1520522804.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:44.834Z,1520522804.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:45.238Z,1520522805.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:45.634Z,1520522805.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:46.025Z,1520522806.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:46.431Z,1520522806.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:46.828Z,1520522806.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:47.233Z,1520522807.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:47.639Z,1520522807.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:48.038Z,1520522808.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:48.430Z,1520522808.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:48.835Z,1520522808.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:49.234Z,1520522809.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:49.630Z,1520522809.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:50.035Z,1520522810.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:50.439Z,1520522810.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:50.834Z,1520522810.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:51.266Z,1520522811.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:51.627Z,1520522811.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:52.021Z,1520522812.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:52.430Z,1520522812.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:52.828Z,1520522812.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:53.233Z,1520522813.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:53.636Z,1520522813.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:53.665Z,1520522813.665 [CBIT](INFO): Clearing failed state for component DropWeight
2018-03-08T15:26:53.665Z,1520522813.665 [DropWeight] No Fault, FailCount= 1
2018-03-08T15:26:54.042Z,1520522814.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:54.430Z,1520522814.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:54.835Z,1520522814.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:55.229Z,1520522815.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:55.630Z,1520522815.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:58.733Z,1520522818.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:58.878Z,1520522818.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:59.222Z,1520522819.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:26:59.634Z,1520522819.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:00.019Z,1520522820.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:00.418Z,1520522820.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:00.796Z,1520522820.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:01.224Z,1520522821.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:01.623Z,1520522821.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:02.021Z,1520522822.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:02.403Z,1520522822.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:02.807Z,1520522822.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:03.203Z,1520522823.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:03.629Z,1520522823.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:04.006Z,1520522824.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:04.432Z,1520522824.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:04.808Z,1520522824.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:05.230Z,1520522825.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:05.604Z,1520522825.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:06.007Z,1520522826.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:06.411Z,1520522826.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:06.804Z,1520522826.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:07.205Z,1520522827.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:07.630Z,1520522827.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:08.032Z,1520522828.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:08.403Z,1520522828.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:08.803Z,1520522828.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:09.205Z,1520522829.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:09.604Z,1520522829.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:10.010Z,1520522830.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:10.432Z,1520522830.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:10.831Z,1520522830.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:11.205Z,1520522831.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:11.604Z,1520522831.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:12.004Z,1520522832.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:12.410Z,1520522832.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:12.804Z,1520522832.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:13.214Z,1520522833.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:13.614Z,1520522833.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:14.007Z,1520522834.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:14.403Z,1520522834.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:14.801Z,1520522834.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:15.199Z,1520522835.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:15.603Z,1520522835.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:16.001Z,1520522836.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:16.416Z,1520522836.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:16.812Z,1520522836.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:17.209Z,1520522837.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:17.605Z,1520522837.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:18.010Z,1520522838.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:18.405Z,1520522838.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:18.798Z,1520522838.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:19.207Z,1520522839.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:19.612Z,1520522839.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:20.008Z,1520522840.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:20.405Z,1520522840.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:20.820Z,1520522840.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:21.200Z,1520522841.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:21.606Z,1520522841.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:22.003Z,1520522842.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:22.408Z,1520522842.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:22.812Z,1520522842.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:23.208Z,1520522843.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:23.602Z,1520522843.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:24.007Z,1520522844.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:24.403Z,1520522844.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:24.810Z,1520522844.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:25.209Z,1520522845.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:25.608Z,1520522845.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:26.008Z,1520522846.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:26.405Z,1520522846.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:26.803Z,1520522846.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:27.205Z,1520522847.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:27.606Z,1520522847.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:28.011Z,1520522848.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:28.411Z,1520522848.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:28.813Z,1520522848.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:29.218Z,1520522849.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:29.607Z,1520522849.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:30.006Z,1520522850.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:30.404Z,1520522850.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:30.798Z,1520522850.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:31.218Z,1520522851.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:31.612Z,1520522851.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:32.011Z,1520522852.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:32.406Z,1520522852.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:32.810Z,1520522852.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:33.212Z,1520522853.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:33.605Z,1520522853.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:34.003Z,1520522854.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:34.412Z,1520522854.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:34.812Z,1520522854.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:35.211Z,1520522855.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:35.607Z,1520522855.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:36.006Z,1520522856.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:36.407Z,1520522856.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:36.806Z,1520522856.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:37.218Z,1520522857.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:37.612Z,1520522857.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:38.011Z,1520522858.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:38.410Z,1520522858.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:38.805Z,1520522858.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:39.202Z,1520522859.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:39.610Z,1520522859.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:40.010Z,1520522860.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:40.412Z,1520522860.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:40.811Z,1520522860.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:41.218Z,1520522861.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:41.606Z,1520522861.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:42.006Z,1520522862.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:42.403Z,1520522862.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:42.806Z,1520522862.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:43.212Z,1520522863.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:43.612Z,1520522863.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:44.012Z,1520522864.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:44.410Z,1520522864.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:44.806Z,1520522864.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:45.222Z,1520522865.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:45.607Z,1520522865.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:46.051Z,1520522866.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:46.438Z,1520522866.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:46.815Z,1520522866.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:47.213Z,1520522867.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:47.608Z,1520522867.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:48.004Z,1520522868.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:48.411Z,1520522868.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:48.804Z,1520522868.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:49.213Z,1520522869.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:49.622Z,1520522869.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:50.026Z,1520522870.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:50.410Z,1520522870.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:50.809Z,1520522870.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:51.213Z,1520522871.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:51.612Z,1520522871.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:52.007Z,1520522872.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:52.417Z,1520522872.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:52.816Z,1520522872.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:53.222Z,1520522873.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:53.602Z,1520522873.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:54.011Z,1520522874.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:54.404Z,1520522874.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:54.803Z,1520522874.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:55.211Z,1520522875.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:55.622Z,1520522875.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:27:56.013Z,1520522876.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:01.014Z,1520522881.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:01.147Z,1520522881.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:01.568Z,1520522881.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:01.937Z,1520522881.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:02.332Z,1520522882.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:02.731Z,1520522882.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:03.173Z,1520522883.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:03.542Z,1520522883.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:03.942Z,1520522883.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:04.333Z,1520522884.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:04.740Z,1520522884.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:05.141Z,1520522885.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:05.533Z,1520522885.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:05.928Z,1520522885.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:06.330Z,1520522886.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:06.733Z,1520522886.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:07.173Z,1520522887.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:07.541Z,1520522887.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:07.951Z,1520522887.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:08.332Z,1520522888.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:08.735Z,1520522888.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:09.141Z,1520522889.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:09.541Z,1520522889.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:09.942Z,1520522889.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:10.332Z,1520522890.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:10.734Z,1520522890.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:11.143Z,1520522891.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:11.541Z,1520522891.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:11.936Z,1520522891.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:12.339Z,1520522892.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:12.726Z,1520522892.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:13.140Z,1520522893.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:13.553Z,1520522893.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:13.940Z,1520522893.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:14.334Z,1520522894.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:14.744Z,1520522894.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:15.146Z,1520522895.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:15.546Z,1520522895.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:15.943Z,1520522895.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:16.338Z,1520522896.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:16.721Z,1520522896.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:17.154Z,1520522897.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:17.554Z,1520522897.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:17.950Z,1520522897.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:18.347Z,1520522898.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:18.730Z,1520522898.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:19.155Z,1520522899.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:19.553Z,1520522899.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:19.949Z,1520522899.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:20.331Z,1520522900.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:20.725Z,1520522900.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:21.154Z,1520522901.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:21.550Z,1520522901.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:21.961Z,1520522901.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:22.331Z,1520522902.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:22.731Z,1520522902.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:23.133Z,1520522903.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:23.537Z,1520522903.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:23.934Z,1520522903.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:24.328Z,1520522904.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:24.730Z,1520522904.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:25.132Z,1520522905.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:25.531Z,1520522905.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:25.932Z,1520522905.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:26.327Z,1520522906.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:26.729Z,1520522906.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:27.133Z,1520522907.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:27.532Z,1520522907.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:27.932Z,1520522907.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:28.334Z,1520522908.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:28.729Z,1520522908.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:29.133Z,1520522909.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:29.536Z,1520522909.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:29.932Z,1520522909.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:30.326Z,1520522910.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:30.730Z,1520522910.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:31.132Z,1520522911.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:31.535Z,1520522911.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:31.936Z,1520522911.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:32.327Z,1520522912.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:32.727Z,1520522912.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:33.135Z,1520522913.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:33.536Z,1520522913.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:33.936Z,1520522913.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:34.330Z,1520522914.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:34.730Z,1520522914.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:35.135Z,1520522915.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:35.536Z,1520522915.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:35.936Z,1520522915.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:36.331Z,1520522916.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:36.817Z,1520522916.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:37.135Z,1520522917.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:37.534Z,1520522917.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:37.949Z,1520522917.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:38.350Z,1520522918.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:38.725Z,1520522918.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:39.132Z,1520522919.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:39.547Z,1520522919.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:39.931Z,1520522919.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:40.320Z,1520522920.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:40.750Z,1520522920.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:41.147Z,1520522921.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:41.551Z,1520522921.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:41.945Z,1520522921.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:42.323Z,1520522922.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:42.750Z,1520522922.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:43.145Z,1520522923.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:43.544Z,1520522923.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:43.944Z,1520522923.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:44.350Z,1520522924.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:44.726Z,1520522924.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:45.151Z,1520522925.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:45.545Z,1520522925.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:45.946Z,1520522925.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:46.327Z,1520522926.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:46.731Z,1520522926.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:47.156Z,1520522927.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:47.553Z,1520522927.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:47.940Z,1520522927.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:48.325Z,1520522928.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:48.729Z,1520522928.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:49.132Z,1520522929.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:49.535Z,1520522929.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:49.932Z,1520522929.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:50.327Z,1520522930.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:50.729Z,1520522930.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:51.133Z,1520522931.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:51.536Z,1520522931.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:51.938Z,1520522931.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:52.331Z,1520522932.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:52.725Z,1520522932.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:53.132Z,1520522933.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:53.532Z,1520522933.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:53.932Z,1520522933.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:54.330Z,1520522934.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:54.730Z,1520522934.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:55.133Z,1520522935.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:55.534Z,1520522935.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:55.933Z,1520522935.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:56.328Z,1520522936.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:59.425Z,1520522939.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:59.566Z,1520522939.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:28:59.917Z,1520522939.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:00.318Z,1520522940.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:00.690Z,1520522940.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:01.090Z,1520522941.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:01.493Z,1520522941.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:01.898Z,1520522941.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:02.322Z,1520522942.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:02.723Z,1520522942.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:03.100Z,1520522943.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:03.491Z,1520522943.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:03.890Z,1520522943.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:04.290Z,1520522944.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:04.698Z,1520522944.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:05.090Z,1520522945.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:05.496Z,1520522945.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:05.904Z,1520522945.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:06.306Z,1520522946.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:06.701Z,1520522946.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:07.095Z,1520522947.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:07.495Z,1520522947.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:07.898Z,1520522947.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:08.308Z,1520522948.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:08.703Z,1520522948.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:09.100Z,1520522949.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:09.502Z,1520522949.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:09.897Z,1520522949.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:10.291Z,1520522950.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:10.696Z,1520522950.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:11.098Z,1520522951.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:11.510Z,1520522951.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:11.903Z,1520522951.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:12.304Z,1520522952.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:12.697Z,1520522952.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:13.094Z,1520522953.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:13.498Z,1520522953.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:13.898Z,1520522953.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:14.304Z,1520522954.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:14.703Z,1520522954.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:15.103Z,1520522955.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:15.493Z,1520522955.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:15.894Z,1520522955.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:16.295Z,1520522956.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:16.696Z,1520522956.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:17.096Z,1520522957.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:17.507Z,1520522957.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:17.906Z,1520522957.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:18.315Z,1520522958.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:18.697Z,1520522958.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:19.096Z,1520522959.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:19.502Z,1520522959.502 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:19.502Z,1520522959.502 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 155
2018-03-08T15:29:19.502Z,1520522959.502 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T15:29:19.504Z,1520522959.504 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:19.504Z,1520522959.504 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 155
2018-03-08T15:29:19.504Z,1520522959.504 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T15:29:19.506Z,1520522959.506 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:19.506Z,1520522959.506 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 155
2018-03-08T15:29:19.506Z,1520522959.506 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T15:29:19.518Z,1520522959.518 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T15:29:19.518Z,1520522959.518 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T15:29:19.518Z,1520522959.518 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T15:29:19.912Z,1520522959.912 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T15:29:19.912Z,1520522959.912 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 155
2018-03-08T15:29:19.912Z,1520522959.912 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T15:29:19.913Z,1520522959.913 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 155
2018-03-08T15:29:19.913Z,1520522959.913 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T15:29:19.913Z,1520522959.913 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 155
2018-03-08T15:29:20.311Z,1520522960.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T15:29:20.312Z,1520522960.312 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:29:20.312Z,1520522960.312 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:29:20.317Z,1520522960.317 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T15:29:20.317Z,1520522960.317 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:29:20.317Z,1520522960.317 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:29:20.318Z,1520522960.318 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T15:29:20.318Z,1520522960.318 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:29:20.318Z,1520522960.318 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:29:20.707Z,1520522960.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T15:29:20.709Z,1520522960.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:21.108Z,1520522961.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T15:29:21.109Z,1520522961.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:21.502Z,1520522961.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T15:29:21.503Z,1520522961.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:21.898Z,1520522961.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T15:29:21.899Z,1520522961.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:22.303Z,1520522962.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T15:29:22.304Z,1520522962.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:22.699Z,1520522962.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T15:29:22.701Z,1520522962.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:23.102Z,1520522963.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T15:29:23.103Z,1520522963.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:23.509Z,1520522963.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T15:29:23.510Z,1520522963.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:23.918Z,1520522963.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T15:29:23.919Z,1520522963.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:24.308Z,1520522964.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T15:29:24.309Z,1520522964.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:24.706Z,1520522964.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T15:29:24.707Z,1520522964.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:25.108Z,1520522965.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T15:29:25.109Z,1520522965.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:25.486Z,1520522965.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T15:29:25.487Z,1520522965.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:25.891Z,1520522965.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T15:29:25.892Z,1520522965.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:26.316Z,1520522966.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T15:29:26.317Z,1520522966.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:26.716Z,1520522966.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T15:29:26.717Z,1520522966.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:27.092Z,1520522967.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T15:29:27.093Z,1520522967.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:27.493Z,1520522967.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T15:29:27.494Z,1520522967.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:27.893Z,1520522967.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T15:29:27.894Z,1520522967.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:28.289Z,1520522968.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T15:29:28.290Z,1520522968.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:28.695Z,1520522968.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T15:29:28.696Z,1520522968.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:29.094Z,1520522969.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T15:29:29.095Z,1520522969.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:29.492Z,1520522969.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T15:29:29.493Z,1520522969.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:29.915Z,1520522969.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T15:29:29.915Z,1520522969.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:30.295Z,1520522970.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T15:29:30.296Z,1520522970.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:30.689Z,1520522970.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T15:29:30.690Z,1520522970.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:31.094Z,1520522971.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T15:29:31.095Z,1520522971.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:31.491Z,1520522971.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T15:29:31.492Z,1520522971.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:31.893Z,1520522971.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T15:29:31.894Z,1520522971.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:32.314Z,1520522972.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T15:29:32.315Z,1520522972.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:32.719Z,1520522972.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T15:29:32.720Z,1520522972.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:33.092Z,1520522973.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T15:29:33.093Z,1520522973.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:33.499Z,1520522973.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T15:29:33.500Z,1520522973.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:33.895Z,1520522973.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T15:29:33.896Z,1520522973.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:34.298Z,1520522974.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T15:29:34.299Z,1520522974.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:34.698Z,1520522974.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T15:29:34.699Z,1520522974.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:35.091Z,1520522975.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T15:29:35.092Z,1520522975.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:35.497Z,1520522975.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T15:29:35.498Z,1520522975.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:35.931Z,1520522975.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T15:29:35.932Z,1520522975.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:36.304Z,1520522976.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T15:29:36.313Z,1520522976.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:36.693Z,1520522976.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T15:29:36.694Z,1520522976.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:37.092Z,1520522977.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T15:29:37.093Z,1520522977.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:37.495Z,1520522977.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T15:29:37.497Z,1520522977.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:37.896Z,1520522977.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T15:29:37.897Z,1520522977.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:38.301Z,1520522978.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T15:29:38.302Z,1520522978.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:38.708Z,1520522978.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T15:29:38.731Z,1520522978.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:39.103Z,1520522979.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T15:29:39.104Z,1520522979.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:39.495Z,1520522979.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T15:29:39.496Z,1520522979.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:39.895Z,1520522979.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:40.296Z,1520522980.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:40.695Z,1520522980.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:41.095Z,1520522981.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:41.502Z,1520522981.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:41.908Z,1520522981.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:42.307Z,1520522982.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:42.701Z,1520522982.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:43.096Z,1520522983.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:43.498Z,1520522983.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:43.893Z,1520522983.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:44.299Z,1520522984.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:44.702Z,1520522984.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:45.100Z,1520522985.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:45.494Z,1520522985.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:45.897Z,1520522985.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:46.305Z,1520522986.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:46.695Z,1520522986.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:47.097Z,1520522987.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:47.499Z,1520522987.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:47.904Z,1520522987.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:48.300Z,1520522988.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:48.689Z,1520522988.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:49.093Z,1520522989.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:49.502Z,1520522989.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:49.889Z,1520522989.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:50.306Z,1520522990.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:50.699Z,1520522990.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:51.111Z,1520522991.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:51.499Z,1520522991.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:51.899Z,1520522991.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:52.303Z,1520522992.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:52.697Z,1520522992.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:53.095Z,1520522993.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:53.505Z,1520522993.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:53.907Z,1520522993.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:54.308Z,1520522994.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:54.696Z,1520522994.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:55.103Z,1520522995.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:55.497Z,1520522995.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:55.897Z,1520522995.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:56.310Z,1520522996.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:29:56.718Z,1520522996.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:00.925Z,1520523000.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:00.928Z,1520523000.928 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T15:24:58.3Z
2018-03-08T15:30:00.928Z,1520523000.928 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T15:30:00.928Z,1520523000.928 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T15:30:01.048Z,1520523001.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:01.492Z,1520523001.492 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0180.lzma
2018-03-08T15:30:01.540Z,1520523001.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:01.834Z,1520523001.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:02.191Z,1520523002.191 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0180.lzma.bak
2018-03-08T15:30:02.191Z,1520523002.191 [DataOverHttps](INFO): SBD MOMSN=7986875
2018-03-08T15:30:02.255Z,1520523002.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:02.826Z,1520523002.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:03.044Z,1520523003.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:06.142Z,1520523006.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:06.282Z,1520523006.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:06.635Z,1520523006.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:07.041Z,1520523007.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:07.432Z,1520523007.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:07.836Z,1520523007.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:08.238Z,1520523008.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:11.315Z,1520523011.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:11.443Z,1520523011.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:11.781Z,1520523011.781 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180308T074127/Express0181.lzma
2018-03-08T15:30:11.843Z,1520523011.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:12.220Z,1520523012.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:12.571Z,1520523012.571 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0181.lzma.bak
2018-03-08T15:30:12.571Z,1520523012.571 [DataOverHttps](INFO): SBD MOMSN=7986877
2018-03-08T15:30:12.645Z,1520523012.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:13.192Z,1520523013.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:13.195Z,1520523013.195 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T15:30:13.195Z,1520523013.195 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T15:30:13.195Z,1520523013.195 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T15:30:13.416Z,1520523013.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:16.517Z,1520523016.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:16.645Z,1520523016.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:17.046Z,1520523017.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:17.424Z,1520523017.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:17.817Z,1520523017.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:18.219Z,1520523018.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:18.619Z,1520523018.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:19.025Z,1520523019.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:19.430Z,1520523019.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:19.832Z,1520523019.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:20.230Z,1520523020.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:20.631Z,1520523020.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:21.022Z,1520523021.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:21.425Z,1520523021.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:21.835Z,1520523021.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:22.237Z,1520523022.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:22.627Z,1520523022.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:23.028Z,1520523023.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:23.422Z,1520523023.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:23.821Z,1520523023.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:24.225Z,1520523024.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:24.621Z,1520523024.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:25.021Z,1520523025.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:25.432Z,1520523025.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:25.869Z,1520523025.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:26.233Z,1520523026.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:26.631Z,1520523026.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:27.014Z,1520523027.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:27.414Z,1520523027.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:27.815Z,1520523027.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:28.230Z,1520523028.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:28.655Z,1520523028.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:29.031Z,1520523029.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:29.418Z,1520523029.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:29.814Z,1520523029.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:30.236Z,1520523030.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:30.627Z,1520523030.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:31.026Z,1520523031.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:31.428Z,1520523031.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:31.842Z,1520523031.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:32.225Z,1520523032.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:32.619Z,1520523032.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:33.027Z,1520523033.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:33.423Z,1520523033.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:33.825Z,1520523033.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:34.233Z,1520523034.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:34.628Z,1520523034.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:35.031Z,1520523035.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:35.423Z,1520523035.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:35.823Z,1520523035.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:36.224Z,1520523036.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:36.626Z,1520523036.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:37.025Z,1520523037.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:37.431Z,1520523037.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:37.832Z,1520523037.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:38.233Z,1520523038.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:38.627Z,1520523038.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:39.030Z,1520523039.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:39.429Z,1520523039.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:39.829Z,1520523039.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:40.233Z,1520523040.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:40.633Z,1520523040.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:41.037Z,1520523041.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:41.434Z,1520523041.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:41.831Z,1520523041.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:42.229Z,1520523042.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:42.623Z,1520523042.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:43.035Z,1520523043.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:43.435Z,1520523043.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:43.846Z,1520523043.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:44.235Z,1520523044.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:44.639Z,1520523044.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:45.015Z,1520523045.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:45.436Z,1520523045.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:45.846Z,1520523045.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:46.221Z,1520523046.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:46.646Z,1520523046.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:47.047Z,1520523047.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:47.415Z,1520523047.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:47.819Z,1520523047.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:48.219Z,1520523048.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:48.618Z,1520523048.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:49.017Z,1520523049.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:49.420Z,1520523049.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:49.823Z,1520523049.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:50.232Z,1520523050.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:50.621Z,1520523050.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:51.022Z,1520523051.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:51.426Z,1520523051.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:51.826Z,1520523051.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:52.229Z,1520523052.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:52.623Z,1520523052.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:53.024Z,1520523053.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:53.418Z,1520523053.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:53.821Z,1520523053.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:54.218Z,1520523054.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:54.622Z,1520523054.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:55.022Z,1520523055.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:55.423Z,1520523055.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:55.827Z,1520523055.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:56.235Z,1520523056.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:56.627Z,1520523056.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:57.023Z,1520523057.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:57.418Z,1520523057.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:57.826Z,1520523057.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:58.228Z,1520523058.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:58.628Z,1520523058.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:59.027Z,1520523059.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:59.414Z,1520523059.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:30:59.823Z,1520523059.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:00.222Z,1520523060.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:00.620Z,1520523060.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:01.021Z,1520523061.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:01.427Z,1520523061.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:01.827Z,1520523061.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:02.228Z,1520523062.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:02.631Z,1520523062.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:03.018Z,1520523063.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:03.418Z,1520523063.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:03.824Z,1520523063.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:04.234Z,1520523064.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:04.629Z,1520523064.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:05.027Z,1520523065.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:05.423Z,1520523065.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:05.823Z,1520523065.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:06.220Z,1520523066.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:06.620Z,1520523066.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:07.018Z,1520523067.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:07.428Z,1520523067.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:07.826Z,1520523067.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:08.227Z,1520523068.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:08.621Z,1520523068.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:09.018Z,1520523069.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:09.423Z,1520523069.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:09.821Z,1520523069.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:10.228Z,1520523070.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:10.635Z,1520523070.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:11.035Z,1520523071.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:11.422Z,1520523071.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:11.826Z,1520523071.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:12.221Z,1520523072.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:12.618Z,1520523072.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:13.019Z,1520523073.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:13.431Z,1520523073.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:13.826Z,1520523073.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:16.957Z,1520523076.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:17.098Z,1520523077.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:17.428Z,1520523077.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:17.825Z,1520523077.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:18.257Z,1520523078.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:18.635Z,1520523078.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:19.033Z,1520523079.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:19.428Z,1520523079.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:19.832Z,1520523079.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:20.230Z,1520523080.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:20.622Z,1520523080.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:21.030Z,1520523081.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:21.442Z,1520523081.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:21.836Z,1520523081.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:22.242Z,1520523082.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:22.627Z,1520523082.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:23.029Z,1520523083.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:23.434Z,1520523083.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:23.826Z,1520523083.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:24.236Z,1520523084.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:24.642Z,1520523084.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:25.044Z,1520523085.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:25.431Z,1520523085.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:25.828Z,1520523085.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:26.224Z,1520523086.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:26.627Z,1520523086.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:27.032Z,1520523087.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:27.438Z,1520523087.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:27.842Z,1520523087.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:28.243Z,1520523088.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:28.620Z,1520523088.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:29.023Z,1520523089.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:29.422Z,1520523089.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:29.847Z,1520523089.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:30.245Z,1520523090.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:30.654Z,1520523090.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:31.032Z,1520523091.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:31.427Z,1520523091.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:31.822Z,1520523091.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:32.222Z,1520523092.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:32.628Z,1520523092.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:33.026Z,1520523093.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:33.453Z,1520523093.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:33.840Z,1520523093.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:34.242Z,1520523094.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:34.623Z,1520523094.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:35.028Z,1520523095.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:35.430Z,1520523095.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:35.829Z,1520523095.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:36.244Z,1520523096.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:36.642Z,1520523096.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:37.034Z,1520523097.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:37.426Z,1520523097.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:37.826Z,1520523097.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:38.226Z,1520523098.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:38.626Z,1520523098.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:39.026Z,1520523099.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:39.436Z,1520523099.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:39.835Z,1520523099.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:40.236Z,1520523100.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:40.622Z,1520523100.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:41.026Z,1520523101.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:41.427Z,1520523101.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:41.825Z,1520523101.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:42.236Z,1520523102.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:42.646Z,1520523102.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:43.033Z,1520523103.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:43.430Z,1520523103.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:43.826Z,1520523103.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:44.230Z,1520523104.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:44.627Z,1520523104.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:45.035Z,1520523105.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:45.441Z,1520523105.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:45.846Z,1520523105.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:46.250Z,1520523106.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:46.630Z,1520523106.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:47.034Z,1520523107.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:47.428Z,1520523107.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:47.835Z,1520523107.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:48.246Z,1520523108.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:48.684Z,1520523108.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:49.055Z,1520523109.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:49.445Z,1520523109.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:49.839Z,1520523109.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:50.244Z,1520523110.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:50.618Z,1520523110.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:51.023Z,1520523111.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:51.467Z,1520523111.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:51.525Z,1520523111.525 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T15:31:51.879Z,1520523111.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:52.252Z,1520523112.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:52.635Z,1520523112.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:53.071Z,1520523113.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:53.429Z,1520523113.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:53.830Z,1520523113.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:54.236Z,1520523114.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:54.647Z,1520523114.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:55.040Z,1520523115.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:55.434Z,1520523115.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:55.834Z,1520523115.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:56.236Z,1520523116.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:56.635Z,1520523116.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:57.037Z,1520523117.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:57.441Z,1520523117.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:57.843Z,1520523117.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:58.244Z,1520523118.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:58.635Z,1520523118.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:59.037Z,1520523119.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:59.442Z,1520523119.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:31:59.833Z,1520523119.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:00.245Z,1520523120.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:00.655Z,1520523120.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:01.045Z,1520523121.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:01.450Z,1520523121.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:01.823Z,1520523121.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:02.223Z,1520523122.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:02.627Z,1520523122.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:03.028Z,1520523123.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:03.452Z,1520523123.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:03.848Z,1520523123.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:04.255Z,1520523124.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:04.650Z,1520523124.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:05.023Z,1520523125.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:05.429Z,1520523125.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:05.825Z,1520523125.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:06.256Z,1520523126.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:06.636Z,1520523126.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:07.057Z,1520523127.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:07.428Z,1520523127.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:07.830Z,1520523127.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:08.231Z,1520523128.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:08.629Z,1520523128.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:09.027Z,1520523129.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:09.433Z,1520523129.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:09.835Z,1520523129.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:10.237Z,1520523130.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:10.624Z,1520523130.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:11.027Z,1520523131.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:11.428Z,1520523131.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:11.826Z,1520523131.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:12.232Z,1520523132.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:12.636Z,1520523132.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:13.042Z,1520523133.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:13.429Z,1520523133.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:13.829Z,1520523133.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:17.030Z,1520523137.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:17.165Z,1520523137.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:17.522Z,1520523137.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:17.916Z,1520523137.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:18.319Z,1520523138.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:18.740Z,1520523138.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:19.116Z,1520523139.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:19.495Z,1520523139.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:19.914Z,1520523139.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:20.308Z,1520523140.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:20.708Z,1520523140.708 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:20.708Z,1520523140.708 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 156
2018-03-08T15:32:20.708Z,1520523140.708 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T15:32:20.710Z,1520523140.710 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:20.710Z,1520523140.710 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 156
2018-03-08T15:32:20.710Z,1520523140.710 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T15:32:20.712Z,1520523140.712 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:20.712Z,1520523140.712 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 156
2018-03-08T15:32:20.712Z,1520523140.712 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T15:32:20.753Z,1520523140.753 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T15:32:20.753Z,1520523140.753 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T15:32:20.753Z,1520523140.753 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T15:32:21.149Z,1520523141.149 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T15:32:21.149Z,1520523141.149 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 156
2018-03-08T15:32:21.150Z,1520523141.150 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T15:32:21.150Z,1520523141.150 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 156
2018-03-08T15:32:21.150Z,1520523141.150 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T15:32:21.150Z,1520523141.150 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 156
2018-03-08T15:32:21.502Z,1520523141.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T15:32:21.502Z,1520523141.502 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:32:21.502Z,1520523141.502 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:32:21.503Z,1520523141.503 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T15:32:21.503Z,1520523141.503 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:32:21.504Z,1520523141.504 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:32:21.504Z,1520523141.504 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T15:32:21.504Z,1520523141.504 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:32:21.505Z,1520523141.505 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:32:21.902Z,1520523141.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T15:32:21.903Z,1520523141.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:22.303Z,1520523142.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T15:32:22.304Z,1520523142.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:22.711Z,1520523142.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T15:32:22.712Z,1520523142.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:23.110Z,1520523143.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T15:32:23.111Z,1520523143.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:23.523Z,1520523143.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T15:32:23.524Z,1520523143.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:23.920Z,1520523143.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T15:32:23.921Z,1520523143.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:24.320Z,1520523144.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T15:32:24.321Z,1520523144.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:24.708Z,1520523144.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T15:32:24.709Z,1520523144.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:25.110Z,1520523145.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T15:32:25.110Z,1520523145.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:25.510Z,1520523145.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T15:32:25.511Z,1520523145.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:25.909Z,1520523145.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T15:32:25.910Z,1520523145.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:26.323Z,1520523146.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T15:32:26.323Z,1520523146.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:26.717Z,1520523146.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T15:32:26.718Z,1520523146.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:27.112Z,1520523147.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T15:32:27.113Z,1520523147.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:27.510Z,1520523147.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T15:32:27.511Z,1520523147.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:27.909Z,1520523147.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T15:32:27.910Z,1520523147.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:28.305Z,1520523148.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T15:32:28.306Z,1520523148.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:28.714Z,1520523148.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T15:32:28.715Z,1520523148.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:29.113Z,1520523149.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T15:32:29.114Z,1520523149.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:29.522Z,1520523149.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T15:32:29.523Z,1520523149.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:29.920Z,1520523149.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T15:32:29.921Z,1520523149.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:30.320Z,1520523150.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T15:32:30.321Z,1520523150.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:30.710Z,1520523150.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T15:32:30.711Z,1520523150.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:31.120Z,1520523151.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T15:32:31.121Z,1520523151.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:31.491Z,1520523151.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T15:32:31.492Z,1520523151.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:31.918Z,1520523151.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T15:32:31.919Z,1520523151.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:32.326Z,1520523152.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T15:32:32.327Z,1520523152.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:32.719Z,1520523152.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T15:32:32.720Z,1520523152.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:33.123Z,1520523153.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T15:32:33.124Z,1520523153.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:33.501Z,1520523153.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T15:32:33.502Z,1520523153.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:33.898Z,1520523153.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T15:32:33.899Z,1520523153.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:34.306Z,1520523154.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T15:32:34.307Z,1520523154.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:34.701Z,1520523154.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T15:32:34.702Z,1520523154.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:35.108Z,1520523155.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T15:32:35.125Z,1520523155.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:35.511Z,1520523155.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T15:32:35.528Z,1520523155.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:35.914Z,1520523155.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T15:32:35.915Z,1520523155.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:36.310Z,1520523156.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T15:32:36.311Z,1520523156.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:36.702Z,1520523156.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T15:32:36.703Z,1520523156.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:37.115Z,1520523157.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T15:32:37.116Z,1520523157.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:37.510Z,1520523157.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T15:32:37.511Z,1520523157.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:37.916Z,1520523157.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T15:32:37.933Z,1520523157.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:38.306Z,1520523158.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T15:32:38.307Z,1520523158.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:38.697Z,1520523158.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T15:32:38.697Z,1520523158.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:39.114Z,1520523159.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T15:32:39.115Z,1520523159.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:39.512Z,1520523159.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T15:32:39.513Z,1520523159.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:39.908Z,1520523159.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T15:32:39.909Z,1520523159.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:40.306Z,1520523160.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T15:32:40.307Z,1520523160.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:40.704Z,1520523160.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T15:32:40.705Z,1520523160.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:41.107Z,1520523161.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:41.512Z,1520523161.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:41.908Z,1520523161.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:42.307Z,1520523162.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:42.706Z,1520523162.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:43.108Z,1520523163.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:43.507Z,1520523163.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:43.908Z,1520523163.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:44.299Z,1520523164.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:44.699Z,1520523164.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:45.106Z,1520523165.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:45.509Z,1520523165.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:45.908Z,1520523165.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:46.307Z,1520523166.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:46.737Z,1520523166.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:47.106Z,1520523167.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:47.507Z,1520523167.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:47.905Z,1520523167.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:48.313Z,1520523168.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:48.712Z,1520523168.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:49.109Z,1520523169.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:49.515Z,1520523169.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:49.907Z,1520523169.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:50.303Z,1520523170.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:50.703Z,1520523170.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:51.107Z,1520523171.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:51.518Z,1520523171.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:51.914Z,1520523171.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:52.312Z,1520523172.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:52.706Z,1520523172.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:53.106Z,1520523173.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:53.504Z,1520523173.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:53.907Z,1520523173.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:54.311Z,1520523174.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:54.712Z,1520523174.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:55.111Z,1520523175.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:55.498Z,1520523175.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:55.904Z,1520523175.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:56.302Z,1520523176.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:56.703Z,1520523176.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:57.103Z,1520523177.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:57.516Z,1520523177.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:57.915Z,1520523177.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:58.311Z,1520523178.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:58.703Z,1520523178.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:59.109Z,1520523179.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:59.504Z,1520523179.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:32:59.906Z,1520523179.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:00.312Z,1520523180.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:00.716Z,1520523180.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:01.116Z,1520523181.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:01.508Z,1520523181.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:01.903Z,1520523181.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:02.307Z,1520523182.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:02.703Z,1520523182.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:03.106Z,1520523183.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:03.516Z,1520523183.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:03.922Z,1520523183.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:04.315Z,1520523184.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:04.706Z,1520523184.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:05.109Z,1520523185.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:05.507Z,1520523185.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:05.902Z,1520523185.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:06.311Z,1520523186.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:06.714Z,1520523186.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:07.122Z,1520523187.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:07.505Z,1520523187.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:07.907Z,1520523187.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:08.304Z,1520523188.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:08.703Z,1520523188.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:09.106Z,1520523189.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:09.522Z,1520523189.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:09.911Z,1520523189.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:10.313Z,1520523190.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:10.702Z,1520523190.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:11.104Z,1520523191.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:11.507Z,1520523191.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:11.906Z,1520523191.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:12.319Z,1520523192.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:12.715Z,1520523192.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:13.122Z,1520523193.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:13.503Z,1520523193.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:13.907Z,1520523193.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:17.006Z,1520523197.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:17.143Z,1520523197.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:17.502Z,1520523197.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:17.903Z,1520523197.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:18.302Z,1520523198.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:18.671Z,1520523198.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:19.075Z,1520523199.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:19.482Z,1520523199.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:19.875Z,1520523199.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:20.303Z,1520523200.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:20.704Z,1520523200.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:21.077Z,1520523201.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:21.477Z,1520523201.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:21.869Z,1520523201.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:22.277Z,1520523202.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:22.678Z,1520523202.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:23.082Z,1520523203.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:23.481Z,1520523203.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:23.904Z,1520523203.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:24.281Z,1520523204.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:24.677Z,1520523204.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:25.073Z,1520523205.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:25.478Z,1520523205.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:25.876Z,1520523205.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:26.278Z,1520523206.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:26.728Z,1520523206.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:27.086Z,1520523207.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:27.468Z,1520523207.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:27.866Z,1520523207.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:28.267Z,1520523208.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:28.666Z,1520523208.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:29.075Z,1520523209.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:29.500Z,1520523209.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:29.884Z,1520523209.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:30.287Z,1520523210.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:30.675Z,1520523210.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:31.069Z,1520523211.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:31.471Z,1520523211.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:31.867Z,1520523211.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:32.338Z,1520523212.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:32.687Z,1520523212.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:33.088Z,1520523213.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:33.478Z,1520523213.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:33.882Z,1520523213.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:34.276Z,1520523214.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:34.675Z,1520523214.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:35.078Z,1520523215.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:35.487Z,1520523215.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:35.887Z,1520523215.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:36.287Z,1520523216.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:36.682Z,1520523216.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:37.080Z,1520523217.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:37.479Z,1520523217.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:37.918Z,1520523217.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:38.287Z,1520523218.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:38.694Z,1520523218.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:39.094Z,1520523219.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:39.478Z,1520523219.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:39.883Z,1520523219.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:40.282Z,1520523220.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:40.679Z,1520523220.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:41.078Z,1520523221.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:41.494Z,1520523221.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:41.887Z,1520523221.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:42.287Z,1520523222.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:42.682Z,1520523222.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:43.078Z,1520523223.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:43.479Z,1520523223.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:43.875Z,1520523223.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:44.287Z,1520523224.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:44.694Z,1520523224.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:45.094Z,1520523225.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:45.478Z,1520523225.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:45.883Z,1520523225.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:46.275Z,1520523226.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:46.676Z,1520523226.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:47.083Z,1520523227.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:47.495Z,1520523227.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:47.887Z,1520523227.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:48.287Z,1520523228.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:48.682Z,1520523228.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:49.078Z,1520523229.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:49.479Z,1520523229.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:49.875Z,1520523229.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:50.285Z,1520523230.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:50.688Z,1520523230.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:51.088Z,1520523231.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:51.475Z,1520523231.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:51.878Z,1520523231.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:52.275Z,1520523232.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:52.681Z,1520523232.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:53.082Z,1520523233.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:53.488Z,1520523233.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:53.887Z,1520523233.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:54.288Z,1520523234.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:54.675Z,1520523234.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:55.072Z,1520523235.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:55.480Z,1520523235.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:55.923Z,1520523235.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:56.329Z,1520523236.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:56.689Z,1520523236.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:57.095Z,1520523237.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:57.493Z,1520523237.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:57.886Z,1520523237.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:58.272Z,1520523238.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:58.718Z,1520523238.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:59.109Z,1520523239.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:59.483Z,1520523239.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:33:59.942Z,1520523239.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:00.285Z,1520523240.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:00.674Z,1520523240.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:01.086Z,1520523241.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:01.477Z,1520523241.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:01.875Z,1520523241.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:02.289Z,1520523242.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:02.684Z,1520523242.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:03.085Z,1520523243.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:03.477Z,1520523243.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:03.879Z,1520523243.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:04.283Z,1520523244.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:04.682Z,1520523244.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:05.087Z,1520523245.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:05.491Z,1520523245.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:05.890Z,1520523245.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:06.284Z,1520523246.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:06.674Z,1520523246.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:07.075Z,1520523247.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:07.479Z,1520523247.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:07.882Z,1520523247.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:08.284Z,1520523248.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:08.679Z,1520523248.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:09.090Z,1520523249.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:09.478Z,1520523249.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:09.878Z,1520523249.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:10.274Z,1520523250.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:10.686Z,1520523250.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:11.075Z,1520523251.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:11.484Z,1520523251.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:11.890Z,1520523251.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:12.290Z,1520523252.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:12.674Z,1520523252.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:13.075Z,1520523253.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:13.518Z,1520523253.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:13.874Z,1520523253.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:14.290Z,1520523254.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:17.548Z,1520523257.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:17.702Z,1520523257.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:18.054Z,1520523258.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:18.451Z,1520523258.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:18.847Z,1520523258.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:19.273Z,1520523259.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:19.649Z,1520523259.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:20.076Z,1520523260.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:20.450Z,1520523260.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:20.849Z,1520523260.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:21.251Z,1520523261.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:21.653Z,1520523261.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:22.058Z,1520523262.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:22.456Z,1520523262.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:22.862Z,1520523262.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:23.254Z,1520523263.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:23.648Z,1520523263.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:24.046Z,1520523264.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:24.450Z,1520523264.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:24.854Z,1520523264.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:25.287Z,1520523265.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:25.662Z,1520523265.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:26.056Z,1520523266.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:26.450Z,1520523266.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:26.854Z,1520523266.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:27.245Z,1520523267.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:27.647Z,1520523267.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:28.044Z,1520523268.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:28.458Z,1520523268.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:28.855Z,1520523268.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:29.251Z,1520523269.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:29.649Z,1520523269.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:30.049Z,1520523270.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:30.451Z,1520523270.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:30.846Z,1520523270.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:31.262Z,1520523271.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:31.652Z,1520523271.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:32.088Z,1520523272.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:32.452Z,1520523272.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:32.854Z,1520523272.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:33.249Z,1520523273.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:33.646Z,1520523273.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:34.054Z,1520523274.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:34.459Z,1520523274.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:34.859Z,1520523274.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:35.253Z,1520523275.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:35.651Z,1520523275.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:36.050Z,1520523276.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:36.451Z,1520523276.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:36.850Z,1520523276.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:37.266Z,1520523277.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:37.653Z,1520523277.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:38.055Z,1520523278.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:38.446Z,1520523278.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:38.855Z,1520523278.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:39.250Z,1520523279.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:39.656Z,1520523279.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:40.050Z,1520523280.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:40.462Z,1520523280.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:40.859Z,1520523280.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:41.252Z,1520523281.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:41.653Z,1520523281.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:42.050Z,1520523282.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:42.451Z,1520523282.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:42.847Z,1520523282.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:43.260Z,1520523283.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:43.675Z,1520523283.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:44.075Z,1520523284.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:44.478Z,1520523284.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:44.843Z,1520523284.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:45.239Z,1520523285.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:45.646Z,1520523285.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:46.038Z,1520523286.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:46.468Z,1520523286.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:46.874Z,1520523286.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:47.267Z,1520523287.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:47.666Z,1520523287.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:48.046Z,1520523288.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:48.440Z,1520523288.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:48.846Z,1520523288.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:49.270Z,1520523289.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:49.652Z,1520523289.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:50.074Z,1520523290.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:50.447Z,1520523290.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:50.859Z,1520523290.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:51.248Z,1520523291.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:51.647Z,1520523291.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:52.054Z,1520523292.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:52.460Z,1520523292.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:52.856Z,1520523292.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:53.252Z,1520523293.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:53.650Z,1520523293.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:54.049Z,1520523294.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:54.450Z,1520523294.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:54.850Z,1520523294.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:55.256Z,1520523295.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:55.656Z,1520523295.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:56.053Z,1520523296.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:56.458Z,1520523296.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:56.853Z,1520523296.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:57.247Z,1520523297.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:57.650Z,1520523297.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:58.053Z,1520523298.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:58.456Z,1520523298.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:58.857Z,1520523298.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:59.257Z,1520523299.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:34:59.651Z,1520523299.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:00.051Z,1520523300.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:00.453Z,1520523300.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:00.851Z,1520523300.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:01.258Z,1520523301.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:01.657Z,1520523301.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:02.055Z,1520523302.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:02.447Z,1520523302.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:02.855Z,1520523302.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:03.249Z,1520523303.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:03.648Z,1520523303.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:04.046Z,1520523304.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:04.458Z,1520523304.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:04.857Z,1520523304.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:05.253Z,1520523305.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:05.643Z,1520523305.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:06.054Z,1520523306.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:06.445Z,1520523306.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:06.841Z,1520523306.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:07.255Z,1520523307.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:07.656Z,1520523307.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:08.051Z,1520523308.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:08.449Z,1520523308.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:08.853Z,1520523308.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:09.242Z,1520523309.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:09.648Z,1520523309.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:10.044Z,1520523310.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:10.410Z,1520523310.410 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T15:35:10.410Z,1520523310.410 [NAL9602] Data Fault, FailCount= 4
2018-03-08T15:35:10.410Z,1520523310.410 [NAL9602](ERROR): Data Fault
2018-03-08T15:35:10.460Z,1520523310.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:10.485Z,1520523310.485 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T15:35:10.810Z,1520523310.810 [NAL9602](INFO): Powering down
2018-03-08T15:35:10.857Z,1520523310.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:11.249Z,1520523311.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:11.643Z,1520523311.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:11.656Z,1520523311.656 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T15:35:11.656Z,1520523311.656 [NAL9602] No Fault, FailCount= 4
2018-03-08T15:35:12.047Z,1520523312.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:12.451Z,1520523312.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:12.849Z,1520523312.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:13.246Z,1520523313.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:13.646Z,1520523313.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:13.649Z,1520523313.649 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T15:35:13.649Z,1520523313.649 [Default:CheckIn:C.Wait] Stopped
2018-03-08T15:35:13.649Z,1520523313.649 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T15:35:13.649Z,1520523313.649 [Default:CheckIn:D] Running Loop=1
2018-03-08T15:35:14.049Z,1520523314.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:14.052Z,1520523314.052 [Default:CheckIn:D] Stopped
2018-03-08T15:35:14.053Z,1520523314.053 [Default:CheckIn:E] Running Loop=1
2018-03-08T15:35:14.446Z,1520523314.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:14.450Z,1520523314.450 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 469.487435 min 
2018-03-08T15:35:14.450Z,1520523314.450 [Default:CheckIn:E] Stopped
2018-03-08T15:35:14.450Z,1520523314.450 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T15:35:14.450Z,1520523314.450 [Default:CheckIn] Stopped
2018-03-08T15:35:14.450Z,1520523314.450 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T15:35:14.450Z,1520523314.450 [Default:CheckIn](INFO): Running loop #46
2018-03-08T15:35:14.451Z,1520523314.451 [Default:CheckIn] Running Loop=46
2018-03-08T15:35:14.451Z,1520523314.451 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T15:35:14.451Z,1520523314.451 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T15:35:17.546Z,1520523317.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:17.686Z,1520523317.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:18.039Z,1520523318.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:18.417Z,1520523318.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:18.813Z,1520523318.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:19.219Z,1520523319.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:19.617Z,1520523319.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:20.018Z,1520523320.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:20.414Z,1520523320.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:20.817Z,1520523320.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:21.209Z,1520523321.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:21.614Z,1520523321.614 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:21.614Z,1520523321.614 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 157
2018-03-08T15:35:21.614Z,1520523321.614 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T15:35:21.616Z,1520523321.616 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:21.616Z,1520523321.616 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 157
2018-03-08T15:35:21.616Z,1520523321.616 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T15:35:21.618Z,1520523321.618 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:21.618Z,1520523321.618 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 157
2018-03-08T15:35:21.618Z,1520523321.618 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T15:35:21.650Z,1520523321.650 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T15:35:21.650Z,1520523321.650 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T15:35:21.650Z,1520523321.650 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T15:35:22.023Z,1520523322.023 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T15:35:22.023Z,1520523322.023 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 157
2018-03-08T15:35:22.024Z,1520523322.024 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T15:35:22.024Z,1520523322.024 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 157
2018-03-08T15:35:22.024Z,1520523322.024 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T15:35:22.024Z,1520523322.024 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 157
2018-03-08T15:35:22.415Z,1520523322.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T15:35:22.416Z,1520523322.416 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:35:22.416Z,1520523322.416 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:35:22.416Z,1520523322.416 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T15:35:22.417Z,1520523322.417 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:35:22.417Z,1520523322.417 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:35:22.417Z,1520523322.417 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T15:35:22.418Z,1520523322.418 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:35:22.418Z,1520523322.418 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:35:22.822Z,1520523322.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T15:35:22.823Z,1520523322.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:23.219Z,1520523323.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T15:35:23.220Z,1520523323.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:23.615Z,1520523323.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T15:35:23.616Z,1520523323.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:24.017Z,1520523324.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T15:35:24.018Z,1520523324.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:24.412Z,1520523324.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T15:35:24.413Z,1520523324.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:24.817Z,1520523324.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T15:35:24.818Z,1520523324.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:25.225Z,1520523325.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T15:35:25.225Z,1520523325.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:25.620Z,1520523325.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T15:35:25.621Z,1520523325.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:26.020Z,1520523326.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T15:35:26.021Z,1520523326.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:26.422Z,1520523326.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T15:35:26.423Z,1520523326.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:26.821Z,1520523326.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T15:35:26.822Z,1520523326.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:27.214Z,1520523327.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T15:35:27.215Z,1520523327.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:27.621Z,1520523327.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T15:35:27.622Z,1520523327.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:28.019Z,1520523328.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T15:35:28.020Z,1520523328.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:28.421Z,1520523328.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T15:35:28.422Z,1520523328.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:28.826Z,1520523328.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T15:35:28.827Z,1520523328.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:29.221Z,1520523329.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T15:35:29.221Z,1520523329.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:29.615Z,1520523329.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T15:35:29.616Z,1520523329.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:30.021Z,1520523330.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T15:35:30.022Z,1520523330.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:30.420Z,1520523330.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T15:35:30.421Z,1520523330.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:30.821Z,1520523330.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T15:35:30.822Z,1520523330.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:31.219Z,1520523331.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T15:35:31.220Z,1520523331.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:31.618Z,1520523331.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T15:35:31.619Z,1520523331.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:32.021Z,1520523332.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T15:35:32.022Z,1520523332.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:32.426Z,1520523332.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T15:35:32.427Z,1520523332.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:32.818Z,1520523332.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T15:35:32.819Z,1520523332.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:33.218Z,1520523333.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T15:35:33.219Z,1520523333.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:33.628Z,1520523333.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T15:35:33.629Z,1520523333.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:34.021Z,1520523334.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T15:35:34.022Z,1520523334.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:34.424Z,1520523334.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T15:35:34.425Z,1520523334.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:34.819Z,1520523334.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T15:35:34.821Z,1520523334.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:35.224Z,1520523335.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T15:35:35.225Z,1520523335.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:35.619Z,1520523335.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T15:35:35.620Z,1520523335.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:36.021Z,1520523336.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T15:35:36.022Z,1520523336.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:36.423Z,1520523336.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T15:35:36.424Z,1520523336.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:36.823Z,1520523336.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T15:35:36.824Z,1520523336.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:37.227Z,1520523337.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T15:35:37.228Z,1520523337.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:37.622Z,1520523337.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T15:35:37.623Z,1520523337.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:38.021Z,1520523338.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T15:35:38.022Z,1520523338.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:38.417Z,1520523338.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T15:35:38.418Z,1520523338.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:38.823Z,1520523338.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T15:35:38.824Z,1520523338.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:39.223Z,1520523339.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T15:35:39.223Z,1520523339.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:39.627Z,1520523339.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T15:35:39.628Z,1520523339.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:40.021Z,1520523340.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T15:35:40.022Z,1520523340.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:40.421Z,1520523340.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T15:35:40.422Z,1520523340.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:40.821Z,1520523340.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T15:35:40.822Z,1520523340.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:41.174Z,1520523341.174 [NAL9602](INFO): Powering up NAL9602
2018-03-08T15:35:41.226Z,1520523341.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T15:35:41.227Z,1520523341.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:41.615Z,1520523341.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:42.021Z,1520523342.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:42.421Z,1520523342.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:42.821Z,1520523342.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:43.227Z,1520523343.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:43.621Z,1520523343.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:44.022Z,1520523344.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:44.427Z,1520523344.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:44.829Z,1520523344.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:45.223Z,1520523345.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:45.621Z,1520523345.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:46.026Z,1520523346.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:46.434Z,1520523346.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:46.879Z,1520523346.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:47.236Z,1520523347.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:47.646Z,1520523347.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:48.037Z,1520523348.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:48.410Z,1520523348.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:48.814Z,1520523348.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:49.241Z,1520523349.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:49.610Z,1520523349.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:50.013Z,1520523350.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:50.416Z,1520523350.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:50.808Z,1520523350.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:51.210Z,1520523351.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:51.637Z,1520523351.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:51.986Z,1520523351.986 [NAL9602](INFO): NAL9602 initialized
2018-03-08T15:35:52.039Z,1520523352.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:52.416Z,1520523352.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:52.845Z,1520523352.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:53.242Z,1520523353.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:53.643Z,1520523353.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:54.014Z,1520523354.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:54.422Z,1520523354.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:54.818Z,1520523354.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:55.226Z,1520523355.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:55.628Z,1520523355.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:56.032Z,1520523356.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:56.422Z,1520523356.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:56.818Z,1520523356.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:57.218Z,1520523357.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:57.621Z,1520523357.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:58.025Z,1520523358.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:58.428Z,1520523358.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:58.830Z,1520523358.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:59.226Z,1520523359.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:35:59.621Z,1520523359.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:00.023Z,1520523360.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:00.428Z,1520523360.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:00.824Z,1520523360.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:01.223Z,1520523361.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:01.621Z,1520523361.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:02.023Z,1520523362.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:02.428Z,1520523362.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:02.824Z,1520523362.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:03.224Z,1520523363.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:03.621Z,1520523363.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:04.025Z,1520523364.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:04.424Z,1520523364.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:04.830Z,1520523364.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:05.220Z,1520523365.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:05.621Z,1520523365.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:06.024Z,1520523366.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:06.424Z,1520523366.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:06.823Z,1520523366.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:07.222Z,1520523367.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:07.627Z,1520523367.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:08.034Z,1520523368.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:08.479Z,1520523368.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:08.840Z,1520523368.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:09.232Z,1520523369.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:09.646Z,1520523369.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:10.051Z,1520523370.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:10.439Z,1520523370.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:10.882Z,1520523370.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:11.244Z,1520523371.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:11.640Z,1520523371.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:12.021Z,1520523372.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:12.412Z,1520523372.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:12.815Z,1520523372.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:13.245Z,1520523373.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:13.644Z,1520523373.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:14.043Z,1520523374.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:14.423Z,1520523374.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:14.816Z,1520523374.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:17.942Z,1520523377.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:18.070Z,1520523378.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:18.424Z,1520523378.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:18.820Z,1520523378.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:19.220Z,1520523379.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:19.615Z,1520523379.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:20.013Z,1520523380.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:20.413Z,1520523380.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:20.815Z,1520523380.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:21.228Z,1520523381.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:21.617Z,1520523381.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:22.028Z,1520523382.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:22.414Z,1520523382.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:22.818Z,1520523382.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:23.222Z,1520523383.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:23.617Z,1520523383.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:24.019Z,1520523384.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:24.424Z,1520523384.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:24.820Z,1520523384.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:25.228Z,1520523385.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:25.617Z,1520523385.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:26.020Z,1520523386.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:26.424Z,1520523386.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:26.820Z,1520523386.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:27.222Z,1520523387.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:27.609Z,1520523387.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:28.019Z,1520523388.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:28.424Z,1520523388.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:28.820Z,1520523388.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:29.215Z,1520523389.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:29.617Z,1520523389.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:30.021Z,1520523390.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:30.424Z,1520523390.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:30.820Z,1520523390.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:31.223Z,1520523391.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:31.622Z,1520523391.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:32.020Z,1520523392.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:32.424Z,1520523392.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:32.820Z,1520523392.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:33.219Z,1520523393.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:33.618Z,1520523393.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:34.030Z,1520523394.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:34.423Z,1520523394.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:34.823Z,1520523394.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:35.222Z,1520523395.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:35.615Z,1520523395.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:36.030Z,1520523396.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:36.424Z,1520523396.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:36.824Z,1520523396.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:37.226Z,1520523397.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:37.622Z,1520523397.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:38.034Z,1520523398.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:38.430Z,1520523398.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:38.827Z,1520523398.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:39.225Z,1520523399.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:39.615Z,1520523399.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:40.028Z,1520523400.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:40.432Z,1520523400.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:40.833Z,1520523400.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:41.222Z,1520523401.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:41.630Z,1520523401.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:42.027Z,1520523402.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:42.434Z,1520523402.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:42.833Z,1520523402.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:43.226Z,1520523403.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:43.607Z,1520523403.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:44.032Z,1520523404.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:44.431Z,1520523404.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:44.835Z,1520523404.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:45.234Z,1520523405.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:45.611Z,1520523405.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:46.038Z,1520523406.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:46.442Z,1520523406.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:46.832Z,1520523406.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:47.234Z,1520523407.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:47.638Z,1520523407.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:48.024Z,1520523408.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:48.428Z,1520523408.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:48.825Z,1520523408.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:49.222Z,1520523409.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:49.619Z,1520523409.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:50.025Z,1520523410.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:50.420Z,1520523410.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:50.919Z,1520523410.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:51.215Z,1520523411.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:51.615Z,1520523411.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:52.022Z,1520523412.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:52.430Z,1520523412.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:52.824Z,1520523412.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:53.220Z,1520523413.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:53.616Z,1520523413.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:54.024Z,1520523414.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:54.430Z,1520523414.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:54.825Z,1520523414.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:55.223Z,1520523415.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:55.619Z,1520523415.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:56.023Z,1520523416.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:56.423Z,1520523416.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:56.823Z,1520523416.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:57.220Z,1520523417.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:57.622Z,1520523417.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:58.030Z,1520523418.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:58.423Z,1520523418.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:58.823Z,1520523418.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:59.222Z,1520523419.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:36:59.617Z,1520523419.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:00.024Z,1520523420.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:00.426Z,1520523420.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:00.823Z,1520523420.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:01.219Z,1520523421.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:01.613Z,1520523421.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:02.024Z,1520523422.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:02.424Z,1520523422.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:02.823Z,1520523422.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:03.219Z,1520523423.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:03.622Z,1520523423.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:04.024Z,1520523424.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:04.423Z,1520523424.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:04.824Z,1520523424.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:05.214Z,1520523425.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:05.614Z,1520523425.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:06.024Z,1520523426.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:06.424Z,1520523426.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:06.823Z,1520523426.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:07.218Z,1520523427.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:07.617Z,1520523427.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:08.024Z,1520523428.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:08.424Z,1520523428.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:08.824Z,1520523428.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:09.219Z,1520523429.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:09.622Z,1520523429.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:10.030Z,1520523430.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:10.427Z,1520523430.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:10.834Z,1520523430.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:11.218Z,1520523431.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:11.618Z,1520523431.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:12.034Z,1520523432.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:12.430Z,1520523432.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:12.828Z,1520523432.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:13.219Z,1520523433.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:13.626Z,1520523433.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:14.027Z,1520523434.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:14.427Z,1520523434.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:14.835Z,1520523434.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:15.259Z,1520523435.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:18.322Z,1520523438.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:18.459Z,1520523438.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:18.820Z,1520523438.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:19.213Z,1520523439.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:19.607Z,1520523439.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:19.985Z,1520523439.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:20.408Z,1520523440.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:20.790Z,1520523440.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:21.196Z,1520523441.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:21.616Z,1520523441.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:22.020Z,1520523442.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:22.390Z,1520523442.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:22.790Z,1520523442.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:23.199Z,1520523443.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:23.594Z,1520523443.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:24.023Z,1520523444.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:24.431Z,1520523444.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:24.792Z,1520523444.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:25.198Z,1520523445.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:25.596Z,1520523445.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:26.023Z,1520523446.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:26.404Z,1520523446.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:26.808Z,1520523446.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:27.199Z,1520523447.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:27.595Z,1520523447.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:28.009Z,1520523448.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:28.412Z,1520523448.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:28.806Z,1520523448.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:29.201Z,1520523449.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:29.598Z,1520523449.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:30.010Z,1520523450.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:30.418Z,1520523450.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:30.814Z,1520523450.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:31.199Z,1520523451.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:31.603Z,1520523451.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:32.014Z,1520523452.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:32.410Z,1520523452.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:32.814Z,1520523452.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:33.198Z,1520523453.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:33.591Z,1520523453.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:34.010Z,1520523454.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:34.411Z,1520523454.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:34.802Z,1520523454.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:35.196Z,1520523455.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:35.595Z,1520523455.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:36.010Z,1520523456.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:36.411Z,1520523456.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:36.814Z,1520523456.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:37.201Z,1520523457.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:37.602Z,1520523457.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:38.003Z,1520523458.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:38.405Z,1520523458.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:38.810Z,1520523458.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:39.196Z,1520523459.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:39.596Z,1520523459.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:40.008Z,1520523460.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:40.411Z,1520523460.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:40.814Z,1520523460.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:41.200Z,1520523461.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:41.606Z,1520523461.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:42.008Z,1520523462.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:42.447Z,1520523462.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:42.835Z,1520523462.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:43.228Z,1520523463.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:43.587Z,1520523463.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:44.014Z,1520523464.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:44.413Z,1520523464.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:44.818Z,1520523464.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:45.215Z,1520523465.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:45.587Z,1520523465.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:46.020Z,1520523466.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:46.437Z,1520523466.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:46.800Z,1520523466.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:47.270Z,1520523467.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:47.620Z,1520523467.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:47.996Z,1520523467.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:48.417Z,1520523468.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:48.816Z,1520523468.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:49.192Z,1520523469.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:49.595Z,1520523469.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:50.019Z,1520523470.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:50.392Z,1520523470.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:50.819Z,1520523470.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:51.193Z,1520523471.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:51.589Z,1520523471.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:52.012Z,1520523472.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:52.403Z,1520523472.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:52.792Z,1520523472.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:53.202Z,1520523473.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:53.594Z,1520523473.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:53.996Z,1520523473.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:54.422Z,1520523474.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:54.821Z,1520523474.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:55.193Z,1520523475.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:55.602Z,1520523475.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:56.031Z,1520523476.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:56.423Z,1520523476.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:56.800Z,1520523476.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:57.195Z,1520523477.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:57.588Z,1520523477.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:58.021Z,1520523478.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:58.424Z,1520523478.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:58.796Z,1520523478.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:59.193Z,1520523479.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:37:59.592Z,1520523479.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:00.001Z,1520523480.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:00.421Z,1520523480.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:00.822Z,1520523480.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:01.197Z,1520523481.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:01.602Z,1520523481.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:02.022Z,1520523482.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:02.397Z,1520523482.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:02.799Z,1520523482.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:03.194Z,1520523483.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:03.595Z,1520523483.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:03.000Z,1520523484.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:04.403Z,1520523484.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:04.801Z,1520523484.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:05.199Z,1520523485.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:05.599Z,1520523485.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:06.001Z,1520523486.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:06.405Z,1520523486.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:06.870Z,1520523486.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:07.200Z,1520523487.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:07.598Z,1520523487.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:08.014Z,1520523488.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:08.413Z,1520523488.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:08.817Z,1520523488.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:09.187Z,1520523489.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:09.613Z,1520523489.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:10.018Z,1520523490.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:10.422Z,1520523490.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:10.802Z,1520523490.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:11.195Z,1520523491.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:11.586Z,1520523491.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:12.020Z,1520523492.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:12.426Z,1520523492.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:12.820Z,1520523492.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:13.194Z,1520523493.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:13.595Z,1520523493.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:14.016Z,1520523494.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:14.391Z,1520523494.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:14.814Z,1520523494.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:15.192Z,1520523495.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:15.592Z,1520523495.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:18.723Z,1520523498.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:18.874Z,1520523498.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:19.215Z,1520523499.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:19.590Z,1520523499.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:19.993Z,1520523499.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:20.398Z,1520523500.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:20.795Z,1520523500.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:21.196Z,1520523501.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:21.618Z,1520523501.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:22.019Z,1520523502.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:22.398Z,1520523502.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:22.793Z,1520523502.793 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:22.793Z,1520523502.793 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 158
2018-03-08T15:38:22.793Z,1520523502.793 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T15:38:22.795Z,1520523502.795 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:22.795Z,1520523502.795 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 158
2018-03-08T15:38:22.795Z,1520523502.795 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T15:38:22.797Z,1520523502.797 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:22.797Z,1520523502.797 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 158
2018-03-08T15:38:22.797Z,1520523502.797 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T15:38:22.821Z,1520523502.821 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T15:38:22.821Z,1520523502.821 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T15:38:22.821Z,1520523502.821 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T15:38:23.204Z,1520523503.204 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T15:38:23.204Z,1520523503.204 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 158
2018-03-08T15:38:23.204Z,1520523503.204 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T15:38:23.204Z,1520523503.204 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 158
2018-03-08T15:38:23.205Z,1520523503.205 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T15:38:23.205Z,1520523503.205 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 158
2018-03-08T15:38:23.595Z,1520523503.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T15:38:23.596Z,1520523503.596 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:38:23.596Z,1520523503.596 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:38:23.597Z,1520523503.597 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T15:38:23.597Z,1520523503.597 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:38:23.598Z,1520523503.598 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:38:23.598Z,1520523503.598 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T15:38:23.598Z,1520523503.598 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:38:23.599Z,1520523503.599 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:38:24.006Z,1520523504.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T15:38:24.007Z,1520523504.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:24.403Z,1520523504.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T15:38:24.404Z,1520523504.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:24.800Z,1520523504.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T15:38:24.801Z,1520523504.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:25.192Z,1520523505.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T15:38:25.197Z,1520523505.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:25.598Z,1520523505.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T15:38:25.599Z,1520523505.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:26.003Z,1520523506.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T15:38:26.005Z,1520523506.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:26.410Z,1520523506.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T15:38:26.411Z,1520523506.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:26.810Z,1520523506.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T15:38:26.811Z,1520523506.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:27.195Z,1520523507.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T15:38:27.196Z,1520523507.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:27.593Z,1520523507.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T15:38:27.594Z,1520523507.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:28.010Z,1520523508.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T15:38:28.011Z,1520523508.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:28.407Z,1520523508.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T15:38:28.408Z,1520523508.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:28.809Z,1520523508.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T15:38:28.810Z,1520523508.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:29.193Z,1520523509.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T15:38:29.194Z,1520523509.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:29.598Z,1520523509.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T15:38:29.599Z,1520523509.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:30.006Z,1520523510.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T15:38:30.007Z,1520523510.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:30.411Z,1520523510.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T15:38:30.412Z,1520523510.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:30.809Z,1520523510.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T15:38:30.810Z,1520523510.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:31.198Z,1520523511.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T15:38:31.199Z,1520523511.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:31.597Z,1520523511.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T15:38:31.598Z,1520523511.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:32.007Z,1520523512.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T15:38:32.009Z,1520523512.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:32.414Z,1520523512.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T15:38:32.415Z,1520523512.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:32.808Z,1520523512.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T15:38:32.809Z,1520523512.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:33.198Z,1520523513.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T15:38:33.199Z,1520523513.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:33.601Z,1520523513.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T15:38:33.602Z,1520523513.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:34.004Z,1520523514.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T15:38:34.005Z,1520523514.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:34.418Z,1520523514.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T15:38:34.419Z,1520523514.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:34.814Z,1520523514.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T15:38:34.815Z,1520523514.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:35.284Z,1520523515.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T15:38:35.285Z,1520523515.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:35.598Z,1520523515.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T15:38:35.599Z,1520523515.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:36.010Z,1520523516.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T15:38:36.011Z,1520523516.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:36.411Z,1520523516.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T15:38:36.412Z,1520523516.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:36.838Z,1520523516.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T15:38:36.839Z,1520523516.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:37.206Z,1520523517.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T15:38:37.207Z,1520523517.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:37.599Z,1520523517.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T15:38:37.600Z,1520523517.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:38.008Z,1520523518.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T15:38:38.009Z,1520523518.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:38.408Z,1520523518.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T15:38:38.409Z,1520523518.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:38.808Z,1520523518.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T15:38:38.809Z,1520523518.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:39.196Z,1520523519.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T15:38:39.197Z,1520523519.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:39.602Z,1520523519.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T15:38:39.603Z,1520523519.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:40.009Z,1520523520.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T15:38:40.010Z,1520523520.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:40.409Z,1520523520.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T15:38:40.410Z,1520523520.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:40.812Z,1520523520.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T15:38:40.821Z,1520523520.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:41.199Z,1520523521.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T15:38:41.200Z,1520523521.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:41.591Z,1520523521.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T15:38:41.597Z,1520523521.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:42.008Z,1520523522.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T15:38:42.010Z,1520523522.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:42.410Z,1520523522.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T15:38:42.411Z,1520523522.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:42.807Z,1520523522.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:43.206Z,1520523523.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:43.606Z,1520523523.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:44.009Z,1520523524.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:44.423Z,1520523524.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:44.810Z,1520523524.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:45.206Z,1520523525.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:45.605Z,1520523525.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:46.014Z,1520523526.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:46.411Z,1520523526.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:46.809Z,1520523526.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:47.206Z,1520523527.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:47.605Z,1520523527.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:48.015Z,1520523528.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:48.410Z,1520523528.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:48.807Z,1520523528.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:49.209Z,1520523529.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:49.611Z,1520523529.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:50.012Z,1520523530.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:50.417Z,1520523530.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:50.812Z,1520523530.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:51.210Z,1520523531.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:51.610Z,1520523531.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:52.015Z,1520523532.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:52.413Z,1520523532.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:52.813Z,1520523532.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:53.186Z,1520523533.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:53.583Z,1520523533.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:54.011Z,1520523534.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:54.417Z,1520523534.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:54.801Z,1520523534.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:55.194Z,1520523535.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:55.586Z,1520523535.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:56.000Z,1520523536.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:56.423Z,1520523536.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:56.803Z,1520523536.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:57.194Z,1520523537.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:57.595Z,1520523537.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:58.008Z,1520523538.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:58.425Z,1520523538.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:58.796Z,1520523538.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:59.195Z,1520523539.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:38:59.595Z,1520523539.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:00.008Z,1520523540.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:00.403Z,1520523540.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:00.800Z,1520523540.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:01.211Z,1520523541.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:01.597Z,1520523541.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:02.001Z,1520523542.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:02.400Z,1520523542.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:02.806Z,1520523542.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:03.192Z,1520523543.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:03.597Z,1520523543.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:03.000Z,1520523544.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:04.411Z,1520523544.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:04.800Z,1520523544.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:05.198Z,1520523545.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:05.597Z,1520523545.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:06.001Z,1520523546.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:06.400Z,1520523546.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:06.804Z,1520523546.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:07.205Z,1520523547.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:07.598Z,1520523547.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:08.003Z,1520523548.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:08.404Z,1520523548.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:08.811Z,1520523548.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:09.194Z,1520523549.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:09.593Z,1520523549.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:10.004Z,1520523550.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:10.403Z,1520523550.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:10.811Z,1520523550.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:11.199Z,1520523551.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:11.591Z,1520523551.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:12.004Z,1520523552.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:12.410Z,1520523552.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:12.803Z,1520523552.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:13.194Z,1520523553.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:13.598Z,1520523553.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:14.004Z,1520523554.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:14.411Z,1520523554.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:14.804Z,1520523554.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:15.193Z,1520523555.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:15.593Z,1520523555.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:16.010Z,1520523556.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:19.111Z,1520523559.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:19.262Z,1520523559.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:19.608Z,1520523559.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:20.012Z,1520523560.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:20.410Z,1520523560.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:20.809Z,1520523560.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:21.213Z,1520523561.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:21.640Z,1520523561.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:22.013Z,1520523562.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:22.407Z,1520523562.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:22.807Z,1520523562.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:23.203Z,1520523563.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:23.609Z,1520523563.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:24.022Z,1520523564.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:24.416Z,1520523564.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:24.811Z,1520523564.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:25.211Z,1520523565.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:25.606Z,1520523565.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:26.022Z,1520523566.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:26.422Z,1520523566.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:26.816Z,1520523566.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:27.216Z,1520523567.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:27.605Z,1520523567.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:28.013Z,1520523568.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:28.415Z,1520523568.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:28.812Z,1520523568.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:29.201Z,1520523569.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:29.601Z,1520523569.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:30.012Z,1520523570.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:30.416Z,1520523570.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:30.817Z,1520523570.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:31.208Z,1520523571.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:31.603Z,1520523571.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:32.017Z,1520523572.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:32.426Z,1520523572.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:32.817Z,1520523572.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:33.209Z,1520523573.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:33.611Z,1520523573.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:34.014Z,1520523574.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:34.413Z,1520523574.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:34.812Z,1520523574.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:35.205Z,1520523575.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:35.609Z,1520523575.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:36.012Z,1520523576.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:36.412Z,1520523576.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:36.808Z,1520523576.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:37.214Z,1520523577.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:37.608Z,1520523577.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:38.013Z,1520523578.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:38.416Z,1520523578.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:38.823Z,1520523578.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:39.208Z,1520523579.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:39.611Z,1520523579.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:40.017Z,1520523580.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:40.413Z,1520523580.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:40.823Z,1520523580.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:41.209Z,1520523581.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:41.609Z,1520523581.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:42.015Z,1520523582.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:42.463Z,1520523582.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:42.823Z,1520523582.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:43.225Z,1520523583.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:43.621Z,1520523583.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:44.017Z,1520523584.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:44.423Z,1520523584.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:44.836Z,1520523584.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:45.212Z,1520523585.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:45.632Z,1520523585.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:46.031Z,1520523586.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:46.434Z,1520523586.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:46.834Z,1520523586.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:47.207Z,1520523587.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:47.599Z,1520523587.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:48.012Z,1520523588.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:48.416Z,1520523588.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:48.803Z,1520523588.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:49.203Z,1520523589.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:49.603Z,1520523589.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:50.016Z,1520523590.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:50.412Z,1520523590.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:50.811Z,1520523590.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:51.210Z,1520523591.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:51.607Z,1520523591.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:52.008Z,1520523592.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:52.412Z,1520523592.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:52.808Z,1520523592.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:53.207Z,1520523593.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:53.605Z,1520523593.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:54.010Z,1520523594.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:54.412Z,1520523594.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:54.808Z,1520523594.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:55.203Z,1520523595.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:55.605Z,1520523595.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:56.014Z,1520523596.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:56.409Z,1520523596.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:56.839Z,1520523596.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:57.198Z,1520523597.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:57.665Z,1520523597.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:58.008Z,1520523598.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:58.475Z,1520523598.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:58.808Z,1520523598.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:59.202Z,1520523599.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:39:59.594Z,1520523599.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:00.008Z,1520523600.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:00.446Z,1520523600.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:00.809Z,1520523600.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:01.202Z,1520523601.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:01.599Z,1520523601.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:02.017Z,1520523602.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:02.431Z,1520523602.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:02.825Z,1520523602.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:03.205Z,1520523603.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:03.604Z,1520523603.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:04.031Z,1520523604.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:04.431Z,1520523604.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:04.804Z,1520523604.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:05.203Z,1520523605.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:05.603Z,1520523605.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:06.008Z,1520523606.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:06.433Z,1520523606.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:06.811Z,1520523606.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:07.203Z,1520523607.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:07.649Z,1520523607.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:08.006Z,1520523608.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:08.430Z,1520523608.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:08.810Z,1520523608.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:09.211Z,1520523609.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:09.603Z,1520523609.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:10.037Z,1520523610.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:10.404Z,1520523610.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:10.837Z,1520523610.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:11.202Z,1520523611.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:11.607Z,1520523611.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:12.016Z,1520523612.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:12.415Z,1520523612.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:12.805Z,1520523612.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:13.204Z,1520523613.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:13.605Z,1520523613.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:14.009Z,1520523614.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:14.408Z,1520523614.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:14.814Z,1520523614.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:14.818Z,1520523614.818 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T15:35:14.5Z
2018-03-08T15:40:14.818Z,1520523614.818 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T15:40:14.818Z,1520523614.818 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T15:40:15.199Z,1520523615.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:15.703Z,1520523615.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:16.015Z,1520523616.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:19.139Z,1520523619.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:19.283Z,1520523619.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:20.017Z,1520523620.017 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0184.lzma
2018-03-08T15:40:20.061Z,1520523620.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:20.186Z,1520523620.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:20.556Z,1520523620.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:20.911Z,1520523620.911 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0184.lzma.bak
2018-03-08T15:40:20.911Z,1520523620.911 [DataOverHttps](INFO): SBD MOMSN=7986952
2018-03-08T15:40:20.990Z,1520523620.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:21.549Z,1520523621.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:21.761Z,1520523621.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:24.858Z,1520523624.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:24.991Z,1520523624.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:25.396Z,1520523625.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:25.770Z,1520523625.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:26.170Z,1520523626.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:26.564Z,1520523626.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:26.960Z,1520523626.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:30.060Z,1520523630.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:30.169Z,1520523630.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:30.493Z,1520523630.493 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180308T074127/Express0185.lzma
2018-03-08T15:40:30.559Z,1520523630.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:30.963Z,1520523630.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:31.290Z,1520523631.290 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0185.lzma.bak
2018-03-08T15:40:31.290Z,1520523631.290 [DataOverHttps](INFO): SBD MOMSN=7986954
2018-03-08T15:40:31.374Z,1520523631.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:31.913Z,1520523631.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:31.916Z,1520523631.916 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T15:40:31.916Z,1520523631.916 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T15:40:31.916Z,1520523631.916 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T15:40:32.143Z,1520523632.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:35.240Z,1520523635.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:35.362Z,1520523635.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:35.739Z,1520523635.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:36.122Z,1520523636.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:36.516Z,1520523636.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:36.913Z,1520523636.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:37.314Z,1520523637.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:37.713Z,1520523637.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:38.123Z,1520523638.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:38.524Z,1520523638.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:38.917Z,1520523638.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:39.314Z,1520523639.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:39.712Z,1520523639.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:40.113Z,1520523640.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:40.515Z,1520523640.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:40.912Z,1520523640.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:41.315Z,1520523641.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:41.748Z,1520523641.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:42.122Z,1520523642.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:42.565Z,1520523642.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:42.926Z,1520523642.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:43.315Z,1520523643.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:43.711Z,1520523643.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:44.120Z,1520523644.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:44.524Z,1520523644.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:44.929Z,1520523644.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:45.362Z,1520523645.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:45.717Z,1520523645.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:46.119Z,1520523646.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:46.520Z,1520523646.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:46.921Z,1520523646.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:47.320Z,1520523647.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:47.728Z,1520523647.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:48.135Z,1520523648.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:48.496Z,1520523648.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:48.922Z,1520523648.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:49.306Z,1520523649.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:49.704Z,1520523649.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:50.140Z,1520523650.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:50.544Z,1520523650.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:50.945Z,1520523650.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:51.310Z,1520523651.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:51.711Z,1520523651.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:52.112Z,1520523652.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:52.512Z,1520523652.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:52.911Z,1520523652.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:53.311Z,1520523653.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:53.716Z,1520523653.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:54.122Z,1520523654.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:54.506Z,1520523654.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:54.917Z,1520523654.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:55.315Z,1520523655.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:55.710Z,1520523655.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:56.137Z,1520523656.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:56.524Z,1520523656.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:56.921Z,1520523656.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:57.315Z,1520523657.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:57.709Z,1520523657.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:58.118Z,1520523658.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:58.513Z,1520523658.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:58.915Z,1520523658.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:59.328Z,1520523659.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:40:59.724Z,1520523659.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:00.123Z,1520523660.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:00.509Z,1520523660.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:00.910Z,1520523660.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:01.310Z,1520523661.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:01.707Z,1520523661.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:02.124Z,1520523662.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:02.532Z,1520523662.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:02.920Z,1520523662.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:03.317Z,1520523663.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:03.714Z,1520523663.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:04.120Z,1520523664.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:04.516Z,1520523664.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:04.911Z,1520523664.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:05.317Z,1520523665.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:05.732Z,1520523665.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:06.124Z,1520523666.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:06.522Z,1520523666.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:06.917Z,1520523666.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:07.310Z,1520523667.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:07.715Z,1520523667.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:08.124Z,1520523668.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:08.531Z,1520523668.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:08.929Z,1520523668.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:09.316Z,1520523669.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:09.712Z,1520523669.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:10.118Z,1520523670.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:10.511Z,1520523670.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:10.911Z,1520523670.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:11.319Z,1520523671.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:11.724Z,1520523671.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:12.139Z,1520523672.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:12.515Z,1520523672.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:12.918Z,1520523672.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:13.312Z,1520523673.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:13.717Z,1520523673.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:14.125Z,1520523674.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:14.525Z,1520523674.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:14.924Z,1520523674.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:15.328Z,1520523675.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:15.716Z,1520523675.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:16.111Z,1520523676.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:16.517Z,1520523676.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:16.915Z,1520523676.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:17.319Z,1520523677.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:17.724Z,1520523677.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:18.130Z,1520523678.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:18.495Z,1520523678.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:18.925Z,1520523678.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:19.303Z,1520523679.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:19.726Z,1520523679.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:20.134Z,1520523680.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:20.527Z,1520523680.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:20.927Z,1520523680.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:21.310Z,1520523681.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:21.710Z,1520523681.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:22.114Z,1520523682.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:22.509Z,1520523682.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:22.911Z,1520523682.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:23.345Z,1520523683.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:23.722Z,1520523683.722 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:23.723Z,1520523683.723 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 159
2018-03-08T15:41:23.723Z,1520523683.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T15:41:23.745Z,1520523683.745 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:23.745Z,1520523683.745 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 159
2018-03-08T15:41:23.745Z,1520523683.745 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T15:41:23.748Z,1520523683.748 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:23.748Z,1520523683.748 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 159
2018-03-08T15:41:23.748Z,1520523683.748 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T15:41:23.775Z,1520523683.775 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T15:41:23.775Z,1520523683.775 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T15:41:23.776Z,1520523683.776 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T15:41:24.147Z,1520523684.147 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T15:41:24.147Z,1520523684.147 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 159
2018-03-08T15:41:24.148Z,1520523684.148 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T15:41:24.148Z,1520523684.148 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 159
2018-03-08T15:41:24.148Z,1520523684.148 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T15:41:24.148Z,1520523684.148 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 159
2018-03-08T15:41:24.507Z,1520523684.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T15:41:24.507Z,1520523684.507 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:41:24.507Z,1520523684.507 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:41:24.508Z,1520523684.508 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T15:41:24.508Z,1520523684.508 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:41:24.509Z,1520523684.509 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:41:24.509Z,1520523684.509 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T15:41:24.509Z,1520523684.509 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:41:24.510Z,1520523684.510 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:41:24.917Z,1520523684.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T15:41:24.918Z,1520523684.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:25.322Z,1520523685.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T15:41:25.323Z,1520523685.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:25.717Z,1520523685.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T15:41:25.718Z,1520523685.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:26.126Z,1520523686.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T15:41:26.127Z,1520523686.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:26.538Z,1520523686.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T15:41:26.539Z,1520523686.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:26.942Z,1520523686.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T15:41:26.943Z,1520523686.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:27.322Z,1520523687.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T15:41:27.323Z,1520523687.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:27.721Z,1520523687.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T15:41:27.722Z,1520523687.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:28.113Z,1520523688.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T15:41:28.114Z,1520523688.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:28.524Z,1520523688.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T15:41:28.529Z,1520523688.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:28.926Z,1520523688.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T15:41:28.927Z,1520523688.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:29.329Z,1520523689.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T15:41:29.331Z,1520523689.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:29.739Z,1520523689.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T15:41:29.740Z,1520523689.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:30.129Z,1520523690.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T15:41:30.130Z,1520523690.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:30.531Z,1520523690.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T15:41:30.532Z,1520523690.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:30.940Z,1520523690.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T15:41:30.941Z,1520523690.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:31.306Z,1520523691.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T15:41:31.307Z,1520523691.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:31.714Z,1520523691.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T15:41:31.715Z,1520523691.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:32.137Z,1520523692.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T15:41:32.138Z,1520523692.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:32.524Z,1520523692.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T15:41:32.545Z,1520523692.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:32.916Z,1520523692.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T15:41:32.917Z,1520523692.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:33.313Z,1520523693.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T15:41:33.314Z,1520523693.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:33.710Z,1520523693.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T15:41:33.711Z,1520523693.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:34.113Z,1520523694.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T15:41:34.114Z,1520523694.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:34.517Z,1520523694.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T15:41:34.518Z,1520523694.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:34.914Z,1520523694.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T15:41:34.915Z,1520523694.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:35.326Z,1520523695.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T15:41:35.327Z,1520523695.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:38.435Z,1520523698.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-03-08T15:41:38.436Z,1520523698.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:38.574Z,1520523698.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T15:41:38.575Z,1520523698.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:38.958Z,1520523698.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T15:41:38.959Z,1520523698.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:39.335Z,1520523699.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T15:41:39.336Z,1520523699.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:39.728Z,1520523699.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T15:41:39.729Z,1520523699.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:40.161Z,1520523700.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T15:41:40.162Z,1520523700.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:40.516Z,1520523700.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:40.560Z,1520523700.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T15:41:40.561Z,1520523700.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:40.932Z,1520523700.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:40.962Z,1520523700.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T15:41:40.963Z,1520523700.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:41.314Z,1520523701.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:41.364Z,1520523701.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T15:41:41.370Z,1520523701.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:41.727Z,1520523701.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:41.780Z,1520523701.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-08T15:41:41.781Z,1520523701.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:42.117Z,1520523702.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:42.167Z,1520523702.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T15:41:42.168Z,1520523702.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:42.516Z,1520523702.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:42.571Z,1520523702.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T15:41:42.572Z,1520523702.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:42.925Z,1520523702.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:42.974Z,1520523702.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T15:41:42.975Z,1520523702.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:43.317Z,1520523703.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:43.333Z,1520523703.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T15:41:43.334Z,1520523703.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:43.721Z,1520523703.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:43.742Z,1520523703.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:44.141Z,1520523704.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:44.171Z,1520523704.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:44.517Z,1520523704.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:44.566Z,1520523704.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:44.930Z,1520523704.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:44.970Z,1520523704.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:45.319Z,1520523705.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:45.367Z,1520523705.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:45.708Z,1520523705.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:45.729Z,1520523705.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:46.120Z,1520523706.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:46.139Z,1520523706.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:46.524Z,1520523706.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:46.568Z,1520523706.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:46.925Z,1520523706.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:46.945Z,1520523706.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:47.320Z,1520523707.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:47.339Z,1520523707.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:47.720Z,1520523707.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:47.747Z,1520523707.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:48.100Z,1520523708.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:48.131Z,1520523708.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:48.513Z,1520523708.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:48.540Z,1520523708.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:48.922Z,1520523708.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:48.941Z,1520523708.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:49.325Z,1520523709.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:49.367Z,1520523709.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:49.728Z,1520523709.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:49.752Z,1520523709.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:50.130Z,1520523710.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:50.149Z,1520523710.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:50.506Z,1520523710.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:50.543Z,1520523710.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:50.910Z,1520523710.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:50.972Z,1520523710.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:51.311Z,1520523711.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:51.339Z,1520523711.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:51.707Z,1520523711.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:51.740Z,1520523711.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:51.753Z,1520523711.753 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T15:41:52.129Z,1520523712.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:52.145Z,1520523712.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:52.526Z,1520523712.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:52.570Z,1520523712.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:52.921Z,1520523712.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:52.958Z,1520523712.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:53.308Z,1520523713.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:53.335Z,1520523713.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:53.707Z,1520523713.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:53.729Z,1520523713.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:54.111Z,1520523714.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:54.131Z,1520523714.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:54.532Z,1520523714.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:54.555Z,1520523714.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:54.910Z,1520523714.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:54.925Z,1520523714.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:55.313Z,1520523715.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:55.334Z,1520523715.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:55.725Z,1520523715.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:55.741Z,1520523715.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:56.121Z,1520523716.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:56.136Z,1520523716.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:56.508Z,1520523716.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:56.539Z,1520523716.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:56.907Z,1520523716.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:56.949Z,1520523716.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:57.311Z,1520523717.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:57.327Z,1520523717.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:57.707Z,1520523717.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:57.723Z,1520523717.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:58.125Z,1520523718.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:41:58.155Z,1520523718.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:58.555Z,1520523718.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:58.961Z,1520523718.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:59.327Z,1520523719.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:41:59.731Z,1520523719.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:00.131Z,1520523720.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:00.535Z,1520523720.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:00.926Z,1520523720.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:01.338Z,1520523721.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:01.752Z,1520523721.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:02.164Z,1520523722.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:02.525Z,1520523722.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:02.930Z,1520523722.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:03.335Z,1520523723.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:03.731Z,1520523723.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:04.137Z,1520523724.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:04.545Z,1520523724.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:04.941Z,1520523724.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:05.366Z,1520523725.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:05.731Z,1520523725.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:06.140Z,1520523726.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:06.538Z,1520523726.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:06.943Z,1520523726.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:07.338Z,1520523727.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:07.745Z,1520523727.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:08.143Z,1520523728.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:08.566Z,1520523728.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:08.931Z,1520523728.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:09.338Z,1520523729.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:09.733Z,1520523729.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:10.139Z,1520523730.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:10.535Z,1520523730.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:10.946Z,1520523730.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:11.340Z,1520523731.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:11.748Z,1520523731.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:12.128Z,1520523732.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:12.541Z,1520523732.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:12.940Z,1520523732.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:13.366Z,1520523733.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:13.742Z,1520523733.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:14.145Z,1520523734.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:14.536Z,1520523734.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:14.935Z,1520523734.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:15.335Z,1520523735.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:15.742Z,1520523735.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:16.151Z,1520523736.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:16.575Z,1520523736.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:16.946Z,1520523736.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:17.342Z,1520523737.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:17.749Z,1520523737.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:18.138Z,1520523738.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:18.536Z,1520523738.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:18.940Z,1520523738.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:19.343Z,1520523739.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:19.771Z,1520523739.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:20.170Z,1520523740.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:20.523Z,1520523740.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:20.940Z,1520523740.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:21.339Z,1520523741.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:21.748Z,1520523741.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:22.149Z,1520523742.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:22.555Z,1520523742.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:22.977Z,1520523742.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:23.337Z,1520523743.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:23.742Z,1520523743.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:24.140Z,1520523744.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:24.536Z,1520523744.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:24.940Z,1520523744.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:25.347Z,1520523745.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:25.752Z,1520523745.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:26.161Z,1520523746.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:26.515Z,1520523746.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:26.923Z,1520523746.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:27.352Z,1520523747.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:27.717Z,1520523747.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:28.153Z,1520523748.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:28.554Z,1520523748.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:28.951Z,1520523748.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:29.359Z,1520523749.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:29.727Z,1520523749.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:30.155Z,1520523750.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:30.532Z,1520523750.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:30.931Z,1520523750.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:31.334Z,1520523751.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:31.755Z,1520523751.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:32.153Z,1520523752.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:32.563Z,1520523752.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:36.521Z,1520523756.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:36.633Z,1520523756.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:37.026Z,1520523757.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:37.426Z,1520523757.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:37.819Z,1520523757.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:38.211Z,1520523758.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:38.593Z,1520523758.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:39.014Z,1520523759.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:39.421Z,1520523759.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:39.819Z,1520523759.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:40.189Z,1520523760.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:40.615Z,1520523760.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:41.018Z,1520523761.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:41.400Z,1520523761.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:41.814Z,1520523761.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:42.199Z,1520523762.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:42.591Z,1520523762.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:43.021Z,1520523763.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:43.403Z,1520523763.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:43.824Z,1520523763.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:44.201Z,1520523764.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:44.599Z,1520523764.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:45.001Z,1520523765.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:45.412Z,1520523765.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:45.804Z,1520523765.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:46.203Z,1520523766.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:46.602Z,1520523766.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:47.004Z,1520523767.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:47.406Z,1520523767.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:47.809Z,1520523767.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:48.206Z,1520523768.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:48.599Z,1520523768.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:49.005Z,1520523769.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:49.408Z,1520523769.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:49.807Z,1520523769.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:50.210Z,1520523770.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:50.603Z,1520523770.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:51.009Z,1520523771.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:51.407Z,1520523771.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:51.809Z,1520523771.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:52.210Z,1520523772.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:52.600Z,1520523772.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:53.015Z,1520523773.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:53.411Z,1520523773.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:53.818Z,1520523773.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:54.205Z,1520523774.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:54.600Z,1520523774.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:55.014Z,1520523775.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:55.422Z,1520523775.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:55.821Z,1520523775.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:56.206Z,1520523776.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:56.604Z,1520523776.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:57.014Z,1520523777.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:57.417Z,1520523777.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:57.821Z,1520523777.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:58.203Z,1520523778.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:58.608Z,1520523778.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:59.016Z,1520523779.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:59.411Z,1520523779.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:42:59.818Z,1520523779.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:00.202Z,1520523780.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:00.602Z,1520523780.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:01.018Z,1520523781.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:01.420Z,1520523781.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:01.804Z,1520523781.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:02.211Z,1520523782.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:02.605Z,1520523782.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:03.013Z,1520523783.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:03.421Z,1520523783.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:03.822Z,1520523783.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:04.205Z,1520523784.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:04.614Z,1520523784.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:05.013Z,1520523785.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:05.411Z,1520523785.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:05.809Z,1520523785.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:06.204Z,1520523786.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:06.593Z,1520523786.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:07.014Z,1520523787.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:07.410Z,1520523787.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:07.812Z,1520523787.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:08.209Z,1520523788.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:08.610Z,1520523788.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:09.013Z,1520523789.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:09.420Z,1520523789.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:09.813Z,1520523789.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:10.185Z,1520523790.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:10.613Z,1520523790.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:11.020Z,1520523791.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:11.416Z,1520523791.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:11.834Z,1520523791.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:12.194Z,1520523792.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:12.674Z,1520523792.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:13.020Z,1520523793.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:13.410Z,1520523793.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:13.796Z,1520523793.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:14.193Z,1520523794.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:14.661Z,1520523794.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:15.005Z,1520523795.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:15.404Z,1520523795.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:15.834Z,1520523795.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:16.205Z,1520523796.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:16.602Z,1520523796.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:17.013Z,1520523797.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:17.412Z,1520523797.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:17.812Z,1520523797.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:18.211Z,1520523798.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:18.603Z,1520523798.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:19.113Z,1520523799.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:19.417Z,1520523799.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:19.817Z,1520523799.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:20.204Z,1520523800.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:20.607Z,1520523800.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:21.014Z,1520523801.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:21.421Z,1520523801.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:21.818Z,1520523801.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:22.205Z,1520523802.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:22.614Z,1520523802.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:23.013Z,1520523803.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:23.410Z,1520523803.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:23.816Z,1520523803.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:24.208Z,1520523804.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:24.600Z,1520523804.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:25.014Z,1520523805.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:25.420Z,1520523805.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:25.814Z,1520523805.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:26.200Z,1520523806.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:26.603Z,1520523806.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:27.013Z,1520523807.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:27.413Z,1520523807.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:27.813Z,1520523807.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:28.203Z,1520523808.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:28.610Z,1520523808.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:29.018Z,1520523809.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:29.418Z,1520523809.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:29.819Z,1520523809.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:30.211Z,1520523810.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:30.609Z,1520523810.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:31.018Z,1520523811.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:31.423Z,1520523811.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:31.814Z,1520523811.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:32.214Z,1520523812.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:32.599Z,1520523812.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:35.712Z,1520523815.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:35.860Z,1520523815.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:36.210Z,1520523816.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:36.585Z,1520523816.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:36.989Z,1520523816.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:37.383Z,1520523817.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:37.783Z,1520523817.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:38.215Z,1520523818.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:38.596Z,1520523818.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:38.998Z,1520523818.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:39.376Z,1520523819.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:39.789Z,1520523819.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:40.188Z,1520523820.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:40.581Z,1520523820.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:40.987Z,1520523820.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:41.418Z,1520523821.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:41.789Z,1520523821.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:42.197Z,1520523822.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:42.641Z,1520523822.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:42.999Z,1520523822.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:43.399Z,1520523823.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:43.841Z,1520523823.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:44.197Z,1520523824.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:44.593Z,1520523824.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:45.018Z,1520523825.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:45.392Z,1520523825.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:45.799Z,1520523825.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:46.225Z,1520523826.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:46.571Z,1520523826.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:47.001Z,1520523827.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:47.378Z,1520523827.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:47.773Z,1520523827.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:48.200Z,1520523828.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:48.606Z,1520523828.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:48.998Z,1520523828.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:49.398Z,1520523829.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:49.781Z,1520523829.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:50.203Z,1520523830.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:50.582Z,1520523830.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:51.014Z,1520523831.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:51.401Z,1520523831.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:51.830Z,1520523831.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:52.184Z,1520523832.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:52.585Z,1520523832.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:52.988Z,1520523832.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:53.412Z,1520523833.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:53.784Z,1520523833.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:54.210Z,1520523834.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:54.594Z,1520523834.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:54.996Z,1520523834.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:55.392Z,1520523835.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:55.793Z,1520523835.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:56.189Z,1520523836.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:56.587Z,1520523836.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:56.993Z,1520523836.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:57.395Z,1520523837.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:57.798Z,1520523837.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:58.191Z,1520523838.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:58.581Z,1520523838.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:59.002Z,1520523839.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:59.392Z,1520523839.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:43:59.792Z,1520523839.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:00.185Z,1520523840.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:00.591Z,1520523840.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:01.048Z,1520523841.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:01.392Z,1520523841.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:01.793Z,1520523841.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:02.186Z,1520523842.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:02.588Z,1520523842.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:02.994Z,1520523842.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:03.396Z,1520523843.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:03.803Z,1520523843.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:04.197Z,1520523844.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:04.594Z,1520523844.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:04.990Z,1520523844.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:05.391Z,1520523845.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:05.790Z,1520523845.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:06.195Z,1520523846.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:06.596Z,1520523846.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:07.002Z,1520523847.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:07.395Z,1520523847.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:07.793Z,1520523847.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:08.188Z,1520523848.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:08.594Z,1520523848.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:08.997Z,1520523848.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:09.395Z,1520523849.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:09.802Z,1520523849.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:10.178Z,1520523850.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:10.194Z,1520523850.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:10.576Z,1520523850.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:10.591Z,1520523850.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:10.982Z,1520523850.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:11.002Z,1520523851.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:11.382Z,1520523851.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:11.397Z,1520523851.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:11.782Z,1520523851.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:11.802Z,1520523851.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:12.175Z,1520523852.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:12.191Z,1520523852.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:12.578Z,1520523852.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:12.594Z,1520523852.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:12.981Z,1520523852.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:12.997Z,1520523852.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:13.383Z,1520523853.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:13.398Z,1520523853.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:13.781Z,1520523853.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:13.796Z,1520523853.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:14.177Z,1520523854.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:14.192Z,1520523854.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:14.567Z,1520523854.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:14.584Z,1520523854.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:14.982Z,1520523854.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:14.997Z,1520523854.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:15.380Z,1520523855.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:15.402Z,1520523855.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:15.781Z,1520523855.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:15.800Z,1520523855.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:16.173Z,1520523856.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:16.188Z,1520523856.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:16.573Z,1520523856.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:16.594Z,1520523856.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:16.980Z,1520523856.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:17.003Z,1520523857.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:17.381Z,1520523857.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:17.396Z,1520523857.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:17.781Z,1520523857.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:17.796Z,1520523857.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:18.175Z,1520523858.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:18.191Z,1520523858.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:18.574Z,1520523858.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:18.589Z,1520523858.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:18.981Z,1520523858.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:18.996Z,1520523858.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:19.380Z,1520523859.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:19.402Z,1520523859.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:19.782Z,1520523859.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:19.802Z,1520523859.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:20.174Z,1520523860.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:20.189Z,1520523860.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:20.571Z,1520523860.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:20.586Z,1520523860.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:20.982Z,1520523860.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:20.997Z,1520523860.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:21.384Z,1520523861.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:21.399Z,1520523861.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:21.781Z,1520523861.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:21.797Z,1520523861.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:22.178Z,1520523862.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:22.192Z,1520523862.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:22.571Z,1520523862.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:22.590Z,1520523862.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:22.979Z,1520523862.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:44:23.002Z,1520523863.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:23.399Z,1520523863.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:23.800Z,1520523863.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:24.186Z,1520523864.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:24.595Z,1520523864.595 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:24.595Z,1520523864.595 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 160
2018-03-08T15:44:24.595Z,1520523864.595 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T15:44:24.597Z,1520523864.597 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:24.597Z,1520523864.597 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 160
2018-03-08T15:44:24.597Z,1520523864.597 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T15:44:24.598Z,1520523864.598 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:24.599Z,1520523864.599 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 160
2018-03-08T15:44:24.599Z,1520523864.599 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T15:44:24.610Z,1520523864.610 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T15:44:24.610Z,1520523864.610 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T15:44:24.610Z,1520523864.610 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T15:44:25.014Z,1520523865.014 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T15:44:25.014Z,1520523865.014 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 160
2018-03-08T15:44:25.015Z,1520523865.015 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T15:44:25.015Z,1520523865.015 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 160
2018-03-08T15:44:25.015Z,1520523865.015 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T15:44:25.015Z,1520523865.015 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 160
2018-03-08T15:44:25.399Z,1520523865.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T15:44:25.400Z,1520523865.400 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:44:25.400Z,1520523865.400 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:44:25.401Z,1520523865.401 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T15:44:25.401Z,1520523865.401 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:44:25.401Z,1520523865.401 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:44:25.402Z,1520523865.402 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T15:44:25.402Z,1520523865.402 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:44:25.402Z,1520523865.402 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:44:25.807Z,1520523865.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T15:44:25.808Z,1520523865.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:26.204Z,1520523866.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T15:44:26.205Z,1520523866.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:26.587Z,1520523866.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T15:44:26.588Z,1520523866.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:27.003Z,1520523867.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T15:44:27.004Z,1520523867.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:27.400Z,1520523867.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T15:44:27.401Z,1520523867.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:27.795Z,1520523867.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T15:44:27.797Z,1520523867.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:28.191Z,1520523868.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T15:44:28.192Z,1520523868.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:28.592Z,1520523868.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T15:44:28.593Z,1520523868.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:28.995Z,1520523868.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T15:44:28.996Z,1520523868.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:29.400Z,1520523869.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T15:44:29.401Z,1520523869.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:29.801Z,1520523869.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T15:44:29.802Z,1520523869.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:30.187Z,1520523870.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T15:44:30.188Z,1520523870.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:30.594Z,1520523870.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T15:44:30.595Z,1520523870.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:31.003Z,1520523871.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T15:44:31.004Z,1520523871.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:31.397Z,1520523871.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T15:44:31.398Z,1520523871.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:31.800Z,1520523871.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T15:44:31.801Z,1520523871.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:32.258Z,1520523872.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-08T15:44:32.259Z,1520523872.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:32.593Z,1520523872.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T15:44:32.594Z,1520523872.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:33.004Z,1520523873.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T15:44:33.005Z,1520523873.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:36.094Z,1520523876.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2018-03-08T15:44:36.095Z,1520523876.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:36.236Z,1520523876.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T15:44:36.237Z,1520523876.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:36.571Z,1520523876.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T15:44:36.572Z,1520523876.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:36.966Z,1520523876.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T15:44:36.967Z,1520523876.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:37.371Z,1520523877.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T15:44:37.372Z,1520523877.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:37.774Z,1520523877.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T15:44:37.775Z,1520523877.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:38.200Z,1520523878.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T15:44:38.201Z,1520523878.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:38.593Z,1520523878.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T15:44:38.594Z,1520523878.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:38.978Z,1520523878.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T15:44:38.979Z,1520523878.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:39.382Z,1520523879.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T15:44:39.383Z,1520523879.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:39.774Z,1520523879.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T15:44:39.775Z,1520523879.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:40.171Z,1520523880.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T15:44:40.172Z,1520523880.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:40.578Z,1520523880.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T15:44:40.579Z,1520523880.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:40.976Z,1520523880.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T15:44:40.977Z,1520523880.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:41.397Z,1520523881.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T15:44:41.398Z,1520523881.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:41.780Z,1520523881.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T15:44:41.781Z,1520523881.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:42.179Z,1520523882.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T15:44:42.180Z,1520523882.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:42.574Z,1520523882.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T15:44:42.575Z,1520523882.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:42.973Z,1520523882.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T15:44:42.974Z,1520523882.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:43.370Z,1520523883.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T15:44:43.371Z,1520523883.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:43.774Z,1520523883.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T15:44:43.775Z,1520523883.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:44.194Z,1520523884.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T15:44:44.195Z,1520523884.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:44.586Z,1520523884.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T15:44:44.587Z,1520523884.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:44.983Z,1520523884.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:45.377Z,1520523885.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:45.774Z,1520523885.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:46.174Z,1520523886.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:46.569Z,1520523886.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:46.986Z,1520523886.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:47.384Z,1520523887.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:47.781Z,1520523887.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:48.187Z,1520523888.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:48.572Z,1520523888.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:48.978Z,1520523888.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:49.378Z,1520523889.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:49.770Z,1520523889.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:50.205Z,1520523890.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:50.591Z,1520523890.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:50.990Z,1520523890.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:51.372Z,1520523891.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:51.776Z,1520523891.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:52.173Z,1520523892.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:52.575Z,1520523892.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:53.057Z,1520523893.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:53.410Z,1520523893.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:53.780Z,1520523893.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:54.191Z,1520523894.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:54.571Z,1520523894.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:54.977Z,1520523894.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:55.375Z,1520523895.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:55.772Z,1520523895.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:56.184Z,1520523896.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:56.587Z,1520523896.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:56.990Z,1520523896.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:57.375Z,1520523897.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:57.772Z,1520523897.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:58.173Z,1520523898.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:58.571Z,1520523898.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:58.978Z,1520523898.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:59.386Z,1520523899.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:44:59.789Z,1520523899.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:00.186Z,1520523900.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:00.574Z,1520523900.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:00.974Z,1520523900.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:01.376Z,1520523901.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:01.774Z,1520523901.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:02.179Z,1520523902.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:02.583Z,1520523902.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:02.981Z,1520523902.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:03.375Z,1520523903.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:03.778Z,1520523903.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:04.172Z,1520523904.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:04.578Z,1520523904.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:04.974Z,1520523904.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:05.380Z,1520523905.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:05.783Z,1520523905.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:06.187Z,1520523906.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:06.574Z,1520523906.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:06.970Z,1520523906.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:07.373Z,1520523907.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:07.773Z,1520523907.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:08.178Z,1520523908.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:08.572Z,1520523908.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:08.980Z,1520523908.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:09.374Z,1520523909.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:09.772Z,1520523909.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:10.177Z,1520523910.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:10.571Z,1520523910.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:11.002Z,1520523911.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:11.377Z,1520523911.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:11.799Z,1520523911.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:12.171Z,1520523912.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:12.574Z,1520523912.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:12.975Z,1520523912.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:13.377Z,1520523913.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:13.776Z,1520523913.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:14.179Z,1520523914.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:14.573Z,1520523914.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:14.976Z,1520523914.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:15.370Z,1520523915.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:15.773Z,1520523915.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:16.178Z,1520523916.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:16.602Z,1520523916.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:16.973Z,1520523916.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:17.372Z,1520523917.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:17.775Z,1520523917.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:18.176Z,1520523918.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:18.571Z,1520523918.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:18.974Z,1520523918.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:19.378Z,1520523919.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:19.801Z,1520523919.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:20.176Z,1520523920.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:20.571Z,1520523920.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:20.974Z,1520523920.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:21.374Z,1520523921.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:21.773Z,1520523921.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:22.179Z,1520523922.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:22.578Z,1520523922.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:22.976Z,1520523922.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:23.370Z,1520523923.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:23.773Z,1520523923.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:24.172Z,1520523924.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:24.577Z,1520523924.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:24.969Z,1520523924.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:25.375Z,1520523925.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:25.782Z,1520523925.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:26.180Z,1520523926.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:26.566Z,1520523926.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:26.976Z,1520523926.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:27.375Z,1520523927.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:27.766Z,1520523927.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:28.176Z,1520523928.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:28.579Z,1520523928.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:28.987Z,1520523928.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:29.374Z,1520523929.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:29.772Z,1520523929.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:30.176Z,1520523930.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:30.573Z,1520523930.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:30.976Z,1520523930.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:31.379Z,1520523931.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:31.782Z,1520523931.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:32.170Z,1520523932.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:45:32.206Z,1520523932.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:32.208Z,1520523932.208 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T15:45:32.209Z,1520523932.209 [Default:CheckIn:C.Wait] Stopped
2018-03-08T15:45:32.209Z,1520523932.209 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T15:45:32.209Z,1520523932.209 [Default:CheckIn:D] Running Loop=1
2018-03-08T15:45:32.547Z,1520523932.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:45:32.570Z,1520523932.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:32.574Z,1520523932.574 [Default:CheckIn:D] Stopped
2018-03-08T15:45:32.574Z,1520523932.574 [Default:CheckIn:E] Running Loop=1
2018-03-08T15:45:32.954Z,1520523932.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:45:32.969Z,1520523932.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:32.973Z,1520523932.973 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 479.796126 min 
2018-03-08T15:45:32.973Z,1520523932.973 [Default:CheckIn:E] Stopped
2018-03-08T15:45:32.973Z,1520523932.973 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T15:45:32.973Z,1520523932.973 [Default:CheckIn] Stopped
2018-03-08T15:45:32.973Z,1520523932.973 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T15:45:32.974Z,1520523932.974 [Default:CheckIn](INFO): Running loop #47
2018-03-08T15:45:32.974Z,1520523932.974 [Default:CheckIn] Running Loop=47
2018-03-08T15:45:32.974Z,1520523932.974 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T15:45:32.974Z,1520523932.974 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T15:45:33.374Z,1520523933.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:36.475Z,1520523936.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:36.609Z,1520523936.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:36.977Z,1520523936.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:37.366Z,1520523937.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:37.756Z,1520523937.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:38.166Z,1520523938.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:38.534Z,1520523938.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:38.964Z,1520523938.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:39.367Z,1520523939.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:39.766Z,1520523939.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:40.175Z,1520523940.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:40.570Z,1520523940.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:40.944Z,1520523940.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:41.370Z,1520523941.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:41.768Z,1520523941.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:42.168Z,1520523942.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:42.565Z,1520523942.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:42.978Z,1520523942.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:43.359Z,1520523943.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:43.767Z,1520523943.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:44.169Z,1520523944.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:44.578Z,1520523944.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:44.971Z,1520523944.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:45.374Z,1520523945.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.403617 seconds old.
2018-03-08T15:45:45.375Z,1520523945.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:45.375Z,1520523945.375 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.403967 seconds old.
2018-03-08T15:45:45.377Z,1520523945.377 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.404311 seconds old.
2018-03-08T15:45:45.751Z,1520523945.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.780848 seconds old.
2018-03-08T15:45:45.752Z,1520523945.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:45.753Z,1520523945.753 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.781397 seconds old.
2018-03-08T15:45:45.754Z,1520523945.754 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.781775 seconds old.
2018-03-08T15:45:46.177Z,1520523946.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.206389 seconds old.
2018-03-08T15:45:46.178Z,1520523946.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:46.179Z,1520523946.179 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.207411 seconds old.
2018-03-08T15:45:46.180Z,1520523946.180 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.207755 seconds old.
2018-03-08T15:45:46.551Z,1520523946.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:46.952Z,1520523946.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:47.351Z,1520523947.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:47.776Z,1520523947.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:48.180Z,1520523948.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:48.579Z,1520523948.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:48.952Z,1520523948.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:49.373Z,1520523949.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:49.753Z,1520523949.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:50.152Z,1520523950.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:50.551Z,1520523950.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:50.966Z,1520523950.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:51.360Z,1520523951.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:51.759Z,1520523951.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:52.159Z,1520523952.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:52.578Z,1520523952.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:52.955Z,1520523952.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:53.355Z,1520523953.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:53.754Z,1520523953.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:54.104Z,1520523954.104 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T15:45:54.104Z,1520523954.104 [NAL9602] Data Fault, FailCount= 5
2018-03-08T15:45:54.104Z,1520523954.104 [NAL9602](ERROR): Data Fault
2018-03-08T15:45:54.180Z,1520523954.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:54.193Z,1520523954.193 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T15:45:54.193Z,1520523954.193 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-08T15:45:54.506Z,1520523954.506 [NAL9602](INFO): Powering down
2018-03-08T15:45:54.567Z,1520523954.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:54.590Z,1520523954.590 [CBIT](INFO): Critical error at 20180308T154554
2018-03-08T15:45:54.955Z,1520523954.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:55.359Z,1520523955.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:55.766Z,1520523955.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:56.152Z,1520523956.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:56.562Z,1520523956.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:56.954Z,1520523956.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:57.363Z,1520523957.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:57.740Z,1520523957.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:58.157Z,1520523958.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:58.552Z,1520523958.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:58.971Z,1520523958.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:59.359Z,1520523959.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:45:59.758Z,1520523959.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:00.157Z,1520523960.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:00.553Z,1520523960.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:00.960Z,1520523960.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:01.344Z,1520523961.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:01.754Z,1520523961.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:02.160Z,1520523962.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:02.535Z,1520523962.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:02.963Z,1520523962.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:03.364Z,1520523963.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:03.769Z,1520523963.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:04.165Z,1520523964.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:04.563Z,1520523964.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:04.962Z,1520523964.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:05.362Z,1520523965.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:05.769Z,1520523965.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:06.163Z,1520523966.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:06.561Z,1520523966.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:06.964Z,1520523966.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:07.330Z,1520523967.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:07.743Z,1520523967.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:08.143Z,1520523968.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:08.568Z,1520523968.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:08.970Z,1520523968.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:09.343Z,1520523969.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:09.739Z,1520523969.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:10.167Z,1520523970.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:10.538Z,1520523970.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:10.967Z,1520523970.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:11.347Z,1520523971.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:11.747Z,1520523971.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:12.146Z,1520523972.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:12.551Z,1520523972.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:12.944Z,1520523972.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:13.366Z,1520523973.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:13.752Z,1520523973.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:14.146Z,1520523974.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:14.543Z,1520523974.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:14.969Z,1520523974.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:15.345Z,1520523975.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:15.745Z,1520523975.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:16.162Z,1520523976.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:16.574Z,1520523976.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:16.944Z,1520523976.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:17.346Z,1520523977.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:17.750Z,1520523977.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:18.166Z,1520523978.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:18.552Z,1520523978.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:18.947Z,1520523978.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:19.343Z,1520523979.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:19.769Z,1520523979.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:20.152Z,1520523980.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:20.545Z,1520523980.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:20.946Z,1520523980.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:21.374Z,1520523981.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:21.739Z,1520523981.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:22.151Z,1520523982.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:22.550Z,1520523982.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:22.974Z,1520523982.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:23.348Z,1520523983.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:23.748Z,1520523983.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:24.150Z,1520523984.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:24.569Z,1520523984.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:24.947Z,1520523984.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:25.347Z,1520523985.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:25.749Z,1520523985.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:26.174Z,1520523986.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:26.545Z,1520523986.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:26.947Z,1520523986.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:27.329Z,1520523987.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:27.350Z,1520523987.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:27.731Z,1520523987.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:27.778Z,1520523987.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:28.129Z,1520523988.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:28.150Z,1520523988.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:28.527Z,1520523988.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:28.547Z,1520523988.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:28.935Z,1520523988.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:28.950Z,1520523988.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:29.327Z,1520523989.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:29.353Z,1520523989.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:29.727Z,1520523989.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:29.751Z,1520523989.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:30.132Z,1520523990.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:30.153Z,1520523990.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:30.531Z,1520523990.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:30.547Z,1520523990.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:30.931Z,1520523990.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:30.974Z,1520523990.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:31.331Z,1520523991.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:31.352Z,1520523991.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:31.734Z,1520523991.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:31.751Z,1520523991.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:32.134Z,1520523992.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:32.149Z,1520523992.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:32.526Z,1520523992.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:32.574Z,1520523992.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:32.933Z,1520523992.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:32.953Z,1520523992.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:33.334Z,1520523993.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:33.352Z,1520523993.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:33.735Z,1520523993.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:33.750Z,1520523993.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:36.846Z,1520523996.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:36.881Z,1520523996.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:36.968Z,1520523996.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:36.991Z,1520523996.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:37.337Z,1520523997.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:37.382Z,1520523997.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:37.737Z,1520523997.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:37.757Z,1520523997.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:38.135Z,1520523998.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:38.153Z,1520523998.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:38.540Z,1520523998.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:38.555Z,1520523998.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:38.931Z,1520523998.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:38.979Z,1520523998.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:39.327Z,1520523999.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:39.349Z,1520523999.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:39.740Z,1520523999.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:39.756Z,1520523999.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:40.139Z,1520524000.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:40.155Z,1520524000.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:40.532Z,1520524000.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:40.621Z,1520524000.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:40.935Z,1520524000.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:40.982Z,1520524000.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:41.337Z,1520524001.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:41.376Z,1520524001.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:41.731Z,1520524001.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:41.747Z,1520524001.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:42.136Z,1520524002.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:42.174Z,1520524002.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:42.555Z,1520524002.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:42.955Z,1520524002.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:43.356Z,1520524003.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:43.735Z,1520524003.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:43.779Z,1520524003.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:44.132Z,1520524004.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:44.153Z,1520524004.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:44.541Z,1520524004.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:44.578Z,1520524004.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:44.938Z,1520524004.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:44.954Z,1520524004.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:45.327Z,1520524005.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:45.364Z,1520524005.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:45.734Z,1520524005.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:45.755Z,1520524005.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:46.130Z,1520524006.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:46.151Z,1520524006.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:46.535Z,1520524006.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:46.552Z,1520524006.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:46.932Z,1520524006.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:46.973Z,1520524006.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:47.340Z,1520524007.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:47.359Z,1520524007.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:47.727Z,1520524007.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:47.778Z,1520524007.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:48.142Z,1520524008.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:48.181Z,1520524008.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:48.537Z,1520524008.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:48.566Z,1520524008.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:48.937Z,1520524008.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:48.957Z,1520524008.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:49.342Z,1520524009.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:49.358Z,1520524009.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:49.734Z,1520524009.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:49.749Z,1520524009.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:50.137Z,1520524010.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:50.184Z,1520524010.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:50.534Z,1520524010.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:50.554Z,1520524010.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:50.940Z,1520524010.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:50.955Z,1520524010.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:51.330Z,1520524011.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:51.361Z,1520524011.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:51.738Z,1520524011.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:51.783Z,1520524011.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:52.134Z,1520524012.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:52.154Z,1520524012.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:52.532Z,1520524012.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:52.552Z,1520524012.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:52.942Z,1520524012.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:52.962Z,1520524012.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:53.337Z,1520524013.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:53.365Z,1520524013.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:53.727Z,1520524013.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:53.747Z,1520524013.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:54.132Z,1520524014.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:54.158Z,1520524014.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:54.542Z,1520524014.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:54.557Z,1520524014.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:54.937Z,1520524014.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:54.983Z,1520524014.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:55.337Z,1520524015.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:55.357Z,1520524015.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:55.740Z,1520524015.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:55.755Z,1520524015.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:56.142Z,1520524016.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:56.158Z,1520524016.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:56.532Z,1520524016.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:56.566Z,1520524016.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:56.937Z,1520524016.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:56.957Z,1520524016.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:57.332Z,1520524017.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:57.352Z,1520524017.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:57.742Z,1520524017.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:57.758Z,1520524017.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:58.129Z,1520524018.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:58.161Z,1520524018.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:58.531Z,1520524018.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:58.552Z,1520524018.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:58.943Z,1520524018.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:58.962Z,1520524018.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:59.342Z,1520524019.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:59.357Z,1520524019.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:46:59.727Z,1520524019.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:46:59.764Z,1520524019.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:00.137Z,1520524020.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:00.158Z,1520524020.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:00.540Z,1520524020.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:00.555Z,1520524020.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:00.942Z,1520524020.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:00.958Z,1520524020.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:01.337Z,1520524021.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:01.383Z,1520524021.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:01.737Z,1520524021.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:01.757Z,1520524021.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:02.140Z,1520524022.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:02.156Z,1520524022.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:02.543Z,1520524022.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:02.558Z,1520524022.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:02.938Z,1520524022.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:02.965Z,1520524022.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:03.319Z,1520524023.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:03.352Z,1520524023.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:03.746Z,1520524023.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:03.761Z,1520524023.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:04.143Z,1520524024.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:04.158Z,1520524024.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:04.531Z,1520524024.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:04.566Z,1520524024.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:04.939Z,1520524024.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:04.959Z,1520524024.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:05.341Z,1520524025.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:05.356Z,1520524025.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:05.735Z,1520524025.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:05.763Z,1520524025.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:06.130Z,1520524026.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:06.174Z,1520524026.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:06.530Z,1520524026.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:06.561Z,1520524026.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:06.923Z,1520524026.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:06.952Z,1520524026.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:07.333Z,1520524027.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:07.378Z,1520524027.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:07.730Z,1520524027.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:07.767Z,1520524027.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:08.130Z,1520524028.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:08.170Z,1520524028.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:08.531Z,1520524028.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:08.562Z,1520524028.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:08.928Z,1520524028.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:08.962Z,1520524028.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:09.323Z,1520524029.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:09.368Z,1520524029.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:09.725Z,1520524029.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:09.757Z,1520524029.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:10.126Z,1520524030.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:10.166Z,1520524030.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:10.525Z,1520524030.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:10.543Z,1520524030.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:10.935Z,1520524030.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:10.978Z,1520524030.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:11.334Z,1520524031.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:11.375Z,1520524031.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:11.724Z,1520524031.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:11.745Z,1520524031.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:12.135Z,1520524032.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:12.173Z,1520524032.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:12.542Z,1520524032.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:12.585Z,1520524032.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:12.936Z,1520524032.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:12.972Z,1520524032.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:13.338Z,1520524033.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:13.354Z,1520524033.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:13.734Z,1520524033.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:13.749Z,1520524033.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:14.145Z,1520524034.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:14.187Z,1520524034.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:14.536Z,1520524034.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:14.588Z,1520524034.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:14.938Z,1520524034.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:14.974Z,1520524034.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:15.331Z,1520524035.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:15.348Z,1520524035.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:15.731Z,1520524035.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:15.776Z,1520524035.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:16.145Z,1520524036.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:16.183Z,1520524036.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:16.529Z,1520524036.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:16.550Z,1520524036.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:16.936Z,1520524036.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:16.951Z,1520524036.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:17.335Z,1520524037.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:17.376Z,1520524037.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:17.727Z,1520524037.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:17.747Z,1520524037.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:18.140Z,1520524038.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:18.155Z,1520524038.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:18.538Z,1520524038.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:18.553Z,1520524038.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:18.932Z,1520524038.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:18.972Z,1520524038.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:19.333Z,1520524039.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:19.353Z,1520524039.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:19.732Z,1520524039.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:19.751Z,1520524039.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:20.138Z,1520524040.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:20.154Z,1520524040.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:20.535Z,1520524040.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:20.563Z,1520524040.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:20.936Z,1520524040.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:20.956Z,1520524040.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:21.334Z,1520524041.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:21.353Z,1520524041.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:21.739Z,1520524041.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:21.753Z,1520524041.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:22.136Z,1520524042.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:22.183Z,1520524042.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:22.527Z,1520524042.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:22.547Z,1520524042.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:22.939Z,1520524042.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:22.954Z,1520524042.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:23.338Z,1520524043.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:23.353Z,1520524043.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:23.728Z,1520524043.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:23.764Z,1520524043.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:24.133Z,1520524044.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:24.154Z,1520524044.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:24.535Z,1520524044.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:24.553Z,1520524044.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:24.938Z,1520524044.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:24.954Z,1520524044.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:25.335Z,1520524045.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:25.363Z,1520524045.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:25.735Z,1520524045.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:25.755Z,1520524045.755 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:25.755Z,1520524045.755 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 161
2018-03-08T15:47:25.755Z,1520524045.755 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T15:47:25.757Z,1520524045.757 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:25.757Z,1520524045.757 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 161
2018-03-08T15:47:25.757Z,1520524045.757 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T15:47:25.759Z,1520524045.759 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:25.759Z,1520524045.759 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 161
2018-03-08T15:47:25.759Z,1520524045.759 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T15:47:25.799Z,1520524045.799 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T15:47:25.799Z,1520524045.799 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T15:47:25.799Z,1520524045.799 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T15:47:26.136Z,1520524046.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:26.165Z,1520524046.165 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T15:47:26.165Z,1520524046.165 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 161
2018-03-08T15:47:26.165Z,1520524046.165 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T15:47:26.165Z,1520524046.165 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 161
2018-03-08T15:47:26.166Z,1520524046.166 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T15:47:26.166Z,1520524046.166 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 161
2018-03-08T15:47:26.538Z,1520524046.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:26.562Z,1520524046.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T15:47:26.563Z,1520524046.563 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:47:26.563Z,1520524046.563 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:47:26.563Z,1520524046.563 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T15:47:26.564Z,1520524046.564 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:47:26.564Z,1520524046.564 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:47:26.564Z,1520524046.564 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T15:47:26.565Z,1520524046.565 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:47:26.565Z,1520524046.565 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:47:26.934Z,1520524046.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:26.963Z,1520524046.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T15:47:26.965Z,1520524046.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:27.319Z,1520524047.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:27.358Z,1520524047.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T15:47:27.359Z,1520524047.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:27.726Z,1520524047.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:27.758Z,1520524047.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T15:47:27.759Z,1520524047.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:28.142Z,1520524048.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:28.156Z,1520524048.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T15:47:28.157Z,1520524048.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:28.523Z,1520524048.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:28.564Z,1520524048.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T15:47:28.565Z,1520524048.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:28.938Z,1520524048.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:28.957Z,1520524048.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T15:47:28.958Z,1520524048.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:29.343Z,1520524049.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:29.358Z,1520524049.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T15:47:29.359Z,1520524049.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:29.727Z,1520524049.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:29.756Z,1520524049.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T15:47:29.757Z,1520524049.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:30.126Z,1520524050.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:30.170Z,1520524050.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T15:47:30.171Z,1520524050.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:30.527Z,1520524050.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:30.558Z,1520524050.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T15:47:30.559Z,1520524050.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:30.944Z,1520524050.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:30.959Z,1520524050.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T15:47:30.960Z,1520524050.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:31.338Z,1520524051.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:31.353Z,1520524051.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T15:47:31.354Z,1520524051.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:31.738Z,1520524051.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:31.765Z,1520524051.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T15:47:31.766Z,1520524051.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:32.138Z,1520524052.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:32.158Z,1520524052.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T15:47:32.159Z,1520524052.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:32.526Z,1520524052.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:32.564Z,1520524052.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T15:47:32.565Z,1520524052.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:32.942Z,1520524052.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:32.956Z,1520524052.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T15:47:32.957Z,1520524052.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:33.323Z,1520524053.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:33.366Z,1520524053.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T15:47:33.367Z,1520524053.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:33.738Z,1520524053.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:33.757Z,1520524053.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T15:47:33.758Z,1520524053.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:34.144Z,1520524054.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:34.166Z,1520524054.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T15:47:34.167Z,1520524054.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:37.226Z,1520524057.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:37.249Z,1520524057.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2018-03-08T15:47:37.250Z,1520524057.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:37.350Z,1520524057.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:37.378Z,1520524057.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T15:47:37.379Z,1520524057.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:37.704Z,1520524057.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:37.741Z,1520524057.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T15:47:37.742Z,1520524057.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:38.106Z,1520524058.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:38.120Z,1520524058.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T15:47:38.121Z,1520524058.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:38.505Z,1520524058.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:38.520Z,1520524058.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T15:47:38.521Z,1520524058.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:38.904Z,1520524058.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:38.923Z,1520524058.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T15:47:38.924Z,1520524058.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:39.308Z,1520524059.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:39.328Z,1520524059.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T15:47:39.330Z,1520524059.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:39.703Z,1520524059.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:39.718Z,1520524059.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T15:47:39.719Z,1520524059.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:40.110Z,1520524060.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:40.125Z,1520524060.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T15:47:40.126Z,1520524060.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:40.501Z,1520524060.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:40.516Z,1520524060.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T15:47:40.517Z,1520524060.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:40.903Z,1520524060.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:40.918Z,1520524060.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T15:47:40.919Z,1520524060.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:41.305Z,1520524061.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:41.320Z,1520524061.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T15:47:41.321Z,1520524061.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:41.702Z,1520524061.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:41.722Z,1520524061.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T15:47:41.723Z,1520524061.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:42.110Z,1520524062.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:42.125Z,1520524062.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T15:47:42.126Z,1520524062.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:42.505Z,1520524062.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:42.522Z,1520524062.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T15:47:42.523Z,1520524062.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:42.909Z,1520524062.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:42.923Z,1520524062.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T15:47:42.924Z,1520524062.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:43.303Z,1520524063.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:43.318Z,1520524063.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T15:47:43.319Z,1520524063.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:43.706Z,1520524063.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:43.721Z,1520524063.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T15:47:43.722Z,1520524063.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:44.106Z,1520524064.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:44.131Z,1520524064.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T15:47:44.132Z,1520524064.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:44.495Z,1520524064.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:44.521Z,1520524064.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T15:47:44.522Z,1520524064.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:44.912Z,1520524064.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:44.927Z,1520524064.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T15:47:44.928Z,1520524064.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:45.294Z,1520524065.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:45.319Z,1520524065.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T15:47:45.320Z,1520524065.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:45.695Z,1520524065.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:45.730Z,1520524065.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T15:47:45.731Z,1520524065.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:46.110Z,1520524066.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:46.130Z,1520524066.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:46.498Z,1520524066.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:46.524Z,1520524066.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:46.896Z,1520524066.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:46.941Z,1520524066.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:47.302Z,1520524067.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:47.334Z,1520524067.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:47.702Z,1520524067.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:47.728Z,1520524067.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:48.101Z,1520524068.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:48.153Z,1520524068.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:48.518Z,1520524068.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:48.541Z,1520524068.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:48.898Z,1520524068.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:48.930Z,1520524068.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:49.291Z,1520524069.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:49.316Z,1520524069.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:49.695Z,1520524069.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:49.723Z,1520524069.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:50.101Z,1520524070.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:50.140Z,1520524070.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:50.492Z,1520524070.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:50.508Z,1520524070.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:50.898Z,1520524070.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:50.913Z,1520524070.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:51.298Z,1520524071.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:51.313Z,1520524071.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:51.698Z,1520524071.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:51.715Z,1520524071.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:52.103Z,1520524072.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:52.118Z,1520524072.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:52.501Z,1520524072.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:52.516Z,1520524072.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:52.903Z,1520524072.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:52.919Z,1520524072.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:53.300Z,1520524073.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:53.326Z,1520524073.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:53.701Z,1520524073.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:53.716Z,1520524073.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:54.101Z,1520524074.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:54.117Z,1520524074.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:54.130Z,1520524074.130 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T15:47:54.130Z,1520524074.130 [NAL9602] No Fault, FailCount= 5
2018-03-08T15:47:54.483Z,1520524074.483 [NAL9602](INFO): Powering up NAL9602
2018-03-08T15:47:54.506Z,1520524074.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:54.551Z,1520524074.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:54.910Z,1520524074.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:54.925Z,1520524074.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:55.300Z,1520524075.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:55.331Z,1520524075.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:55.711Z,1520524075.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:55.726Z,1520524075.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:56.110Z,1520524076.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:56.125Z,1520524076.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:56.508Z,1520524076.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:56.523Z,1520524076.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:56.914Z,1520524076.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:56.934Z,1520524076.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:57.308Z,1520524077.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:57.323Z,1520524077.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:57.701Z,1520524077.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:57.721Z,1520524077.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:58.105Z,1520524078.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:58.131Z,1520524078.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:58.502Z,1520524078.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:58.534Z,1520524078.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:58.904Z,1520524078.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:58.920Z,1520524078.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:59.307Z,1520524079.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:59.322Z,1520524079.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:47:59.701Z,1520524079.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:47:59.725Z,1520524079.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:00.110Z,1520524080.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:00.131Z,1520524080.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:00.510Z,1520524080.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:00.525Z,1520524080.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:00.910Z,1520524080.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:00.925Z,1520524080.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:01.298Z,1520524081.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:01.330Z,1520524081.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:01.710Z,1520524081.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:01.730Z,1520524081.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:02.111Z,1520524082.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:02.125Z,1520524082.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:02.496Z,1520524082.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:02.522Z,1520524082.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:02.905Z,1520524082.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:02.931Z,1520524082.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:03.294Z,1520524083.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:03.321Z,1520524083.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:03.692Z,1520524083.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:03.719Z,1520524083.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:04.111Z,1520524084.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:04.125Z,1520524084.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:04.510Z,1520524084.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:04.525Z,1520524084.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:04.918Z,1520524084.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:04.938Z,1520524084.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:05.282Z,1520524085.282 [NAL9602](INFO): NAL9602 initialized
2018-03-08T15:48:05.299Z,1520524085.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:05.327Z,1520524085.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:05.695Z,1520524085.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:05.727Z,1520524085.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:06.122Z,1520524086.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:06.143Z,1520524086.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:06.527Z,1520524086.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:06.544Z,1520524086.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:06.913Z,1520524086.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:06.946Z,1520524086.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:07.294Z,1520524087.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:07.309Z,1520524087.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:07.703Z,1520524087.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:07.719Z,1520524087.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:08.106Z,1520524088.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:08.125Z,1520524088.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:08.513Z,1520524088.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:08.549Z,1520524088.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:08.921Z,1520524088.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:08.959Z,1520524088.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:09.342Z,1520524089.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:09.374Z,1520524089.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:09.699Z,1520524089.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:09.744Z,1520524089.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:10.108Z,1520524090.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:10.123Z,1520524090.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:10.508Z,1520524090.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:10.523Z,1520524090.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:10.901Z,1520524090.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:10.929Z,1520524090.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:11.319Z,1520524091.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:11.409Z,1520524091.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:11.717Z,1520524091.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:11.762Z,1520524091.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:12.116Z,1520524092.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:12.131Z,1520524092.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:12.507Z,1520524092.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:12.523Z,1520524092.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:12.908Z,1520524092.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:12.936Z,1520524092.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:13.313Z,1520524093.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:13.335Z,1520524093.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:13.717Z,1520524093.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:13.733Z,1520524093.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:14.117Z,1520524094.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:14.136Z,1520524094.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:14.511Z,1520524094.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:14.532Z,1520524094.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:14.911Z,1520524094.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:14.935Z,1520524094.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:15.321Z,1520524095.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:15.337Z,1520524095.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:15.718Z,1520524095.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:15.737Z,1520524095.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:16.120Z,1520524096.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:16.140Z,1520524096.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:16.513Z,1520524096.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:16.563Z,1520524096.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:16.911Z,1520524096.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:16.930Z,1520524096.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:17.321Z,1520524097.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:17.343Z,1520524097.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:17.722Z,1520524097.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:17.742Z,1520524097.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:18.120Z,1520524098.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:18.165Z,1520524098.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:18.512Z,1520524098.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:18.527Z,1520524098.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:18.905Z,1520524098.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:18.934Z,1520524098.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:19.322Z,1520524099.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:19.342Z,1520524099.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:19.725Z,1520524099.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:19.766Z,1520524099.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:20.122Z,1520524100.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:20.138Z,1520524100.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:20.499Z,1520524100.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:20.541Z,1520524100.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:20.911Z,1520524100.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:20.936Z,1520524100.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:21.322Z,1520524101.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:21.338Z,1520524101.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:21.717Z,1520524101.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:21.734Z,1520524101.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:22.117Z,1520524102.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:22.136Z,1520524102.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:22.514Z,1520524102.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:22.535Z,1520524102.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:22.899Z,1520524102.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:22.931Z,1520524102.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:23.317Z,1520524103.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:23.333Z,1520524103.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:23.722Z,1520524103.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:23.742Z,1520524103.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:24.122Z,1520524104.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:24.141Z,1520524104.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:24.499Z,1520524104.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:24.546Z,1520524104.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:24.912Z,1520524104.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:24.935Z,1520524104.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:25.322Z,1520524105.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:25.343Z,1520524105.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:25.725Z,1520524105.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:25.743Z,1520524105.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:26.138Z,1520524106.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:26.174Z,1520524106.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:26.499Z,1520524106.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:26.535Z,1520524106.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:26.912Z,1520524106.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:26.927Z,1520524106.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:27.297Z,1520524107.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:27.342Z,1520524107.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:27.700Z,1520524107.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:27.727Z,1520524107.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:28.099Z,1520524108.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:28.127Z,1520524108.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:28.523Z,1520524108.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:28.545Z,1520524108.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:28.923Z,1520524108.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:28.942Z,1520524108.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:29.325Z,1520524109.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:29.367Z,1520524109.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:29.695Z,1520524109.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:29.727Z,1520524109.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:30.103Z,1520524110.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:30.140Z,1520524110.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:30.498Z,1520524110.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:30.541Z,1520524110.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:30.902Z,1520524110.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:30.937Z,1520524110.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:31.309Z,1520524111.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:31.351Z,1520524111.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:31.725Z,1520524111.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:31.747Z,1520524111.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:32.129Z,1520524112.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:32.147Z,1520524112.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:32.499Z,1520524112.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:32.545Z,1520524112.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:32.902Z,1520524112.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:32.939Z,1520524112.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:33.313Z,1520524113.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:33.347Z,1520524113.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:33.713Z,1520524113.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:33.751Z,1520524113.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:34.126Z,1520524114.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:34.163Z,1520524114.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:34.503Z,1520524114.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:34.546Z,1520524114.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:37.600Z,1520524117.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:37.616Z,1520524117.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:37.737Z,1520524117.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:37.780Z,1520524117.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:38.113Z,1520524118.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:38.150Z,1520524118.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:38.513Z,1520524118.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:38.550Z,1520524118.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:38.904Z,1520524118.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:38.946Z,1520524118.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:39.293Z,1520524119.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:39.309Z,1520524119.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:39.696Z,1520524119.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:39.723Z,1520524119.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:40.102Z,1520524120.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:40.117Z,1520524120.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:40.505Z,1520524120.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:40.521Z,1520524120.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:40.910Z,1520524120.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:40.925Z,1520524120.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:41.308Z,1520524121.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:41.332Z,1520524121.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:41.703Z,1520524121.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:41.718Z,1520524121.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:42.103Z,1520524122.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:42.119Z,1520524122.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:42.495Z,1520524122.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:42.517Z,1520524122.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:42.887Z,1520524122.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:42.912Z,1520524122.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:43.313Z,1520524123.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:43.334Z,1520524123.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:43.713Z,1520524123.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:43.728Z,1520524123.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:44.104Z,1520524124.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:44.119Z,1520524124.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:44.500Z,1520524124.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:44.515Z,1520524124.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:44.895Z,1520524124.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:44.917Z,1520524124.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:45.312Z,1520524125.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:45.327Z,1520524125.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:45.713Z,1520524125.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:45.729Z,1520524125.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:46.109Z,1520524126.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:46.124Z,1520524126.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:46.503Z,1520524126.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:46.518Z,1520524126.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:46.903Z,1520524126.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:46.919Z,1520524126.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:47.309Z,1520524127.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:47.331Z,1520524127.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:47.711Z,1520524127.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:47.727Z,1520524127.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:48.113Z,1520524128.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:48.134Z,1520524128.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:48.504Z,1520524128.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:48.520Z,1520524128.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:48.886Z,1520524128.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:48.912Z,1520524128.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:49.312Z,1520524129.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:49.328Z,1520524129.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:49.712Z,1520524129.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:49.734Z,1520524129.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:50.112Z,1520524130.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:50.127Z,1520524130.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:50.506Z,1520524130.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:50.521Z,1520524130.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:50.910Z,1520524130.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:50.925Z,1520524130.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:51.313Z,1520524131.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:51.334Z,1520524131.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:51.713Z,1520524131.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:51.728Z,1520524131.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:52.112Z,1520524132.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:52.135Z,1520524132.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:52.491Z,1520524132.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:52.517Z,1520524132.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:52.904Z,1520524132.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:52.920Z,1520524132.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:53.317Z,1520524133.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:53.333Z,1520524133.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:53.708Z,1520524133.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:53.723Z,1520524133.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:54.117Z,1520524134.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:54.140Z,1520524134.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:54.503Z,1520524134.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:54.525Z,1520524134.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:54.890Z,1520524134.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:54.922Z,1520524134.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:55.317Z,1520524135.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:55.333Z,1520524135.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:55.716Z,1520524135.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:55.732Z,1520524135.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:56.105Z,1520524136.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:56.120Z,1520524136.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:56.504Z,1520524136.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:56.519Z,1520524136.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:56.891Z,1520524136.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:56.922Z,1520524136.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:57.303Z,1520524137.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:57.327Z,1520524137.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:57.717Z,1520524137.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:57.737Z,1520524137.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:58.113Z,1520524138.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:58.135Z,1520524138.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:58.504Z,1520524138.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:58.518Z,1520524138.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:58.904Z,1520524138.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:58.919Z,1520524138.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:59.313Z,1520524139.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:59.335Z,1520524139.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:48:59.715Z,1520524139.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:48:59.730Z,1520524139.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:00.117Z,1520524140.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:00.133Z,1520524140.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:00.503Z,1520524140.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:00.519Z,1520524140.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:00.887Z,1520524140.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:00.918Z,1520524140.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:01.317Z,1520524141.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:01.333Z,1520524141.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:01.716Z,1520524141.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:01.735Z,1520524141.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:02.106Z,1520524142.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:02.121Z,1520524142.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:02.492Z,1520524142.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:02.533Z,1520524142.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:02.895Z,1520524142.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:02.921Z,1520524142.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:03.308Z,1520524143.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:03.327Z,1520524143.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:03.714Z,1520524143.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:03.729Z,1520524143.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:04.114Z,1520524144.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:04.135Z,1520524144.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:04.495Z,1520524144.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:04.521Z,1520524144.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:04.890Z,1520524144.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:04.917Z,1520524144.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:05.318Z,1520524145.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:05.337Z,1520524145.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:05.718Z,1520524145.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:05.738Z,1520524145.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:06.109Z,1520524146.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:06.130Z,1520524146.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:06.496Z,1520524146.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:06.523Z,1520524146.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:06.892Z,1520524146.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:06.926Z,1520524146.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:07.309Z,1520524147.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:07.335Z,1520524147.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:07.718Z,1520524147.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:07.734Z,1520524147.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:08.100Z,1520524148.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:08.135Z,1520524148.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:08.489Z,1520524148.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:08.524Z,1520524148.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:08.895Z,1520524148.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:08.934Z,1520524148.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:09.316Z,1520524149.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:09.331Z,1520524149.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:09.697Z,1520524149.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:09.731Z,1520524149.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:10.105Z,1520524150.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:10.140Z,1520524150.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:10.499Z,1520524150.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:10.527Z,1520524150.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:10.891Z,1520524150.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:10.907Z,1520524150.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:11.309Z,1520524151.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:11.337Z,1520524151.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:11.705Z,1520524151.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:11.736Z,1520524151.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:12.105Z,1520524152.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:12.138Z,1520524152.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:12.499Z,1520524152.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:12.535Z,1520524152.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:12.898Z,1520524152.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:12.913Z,1520524152.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:13.297Z,1520524153.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:13.313Z,1520524153.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:13.714Z,1520524153.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:13.745Z,1520524153.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:14.109Z,1520524154.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:14.136Z,1520524154.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:14.500Z,1520524154.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:14.515Z,1520524154.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:14.901Z,1520524154.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:14.916Z,1520524154.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:15.301Z,1520524155.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:15.316Z,1520524155.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:15.701Z,1520524155.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:15.716Z,1520524155.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:16.106Z,1520524156.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:16.121Z,1520524156.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:16.503Z,1520524156.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:16.519Z,1520524156.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:16.893Z,1520524156.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:16.908Z,1520524156.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:17.305Z,1520524157.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:17.321Z,1520524157.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:17.703Z,1520524157.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:17.723Z,1520524157.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:18.105Z,1520524158.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:18.120Z,1520524158.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:18.498Z,1520524158.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:18.527Z,1520524158.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:18.901Z,1520524158.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:18.922Z,1520524158.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:19.310Z,1520524159.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:19.325Z,1520524159.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:19.716Z,1520524159.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:19.732Z,1520524159.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:20.113Z,1520524160.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:20.136Z,1520524160.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:20.504Z,1520524160.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:20.521Z,1520524160.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:20.891Z,1520524160.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:20.923Z,1520524160.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:21.316Z,1520524161.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:21.334Z,1520524161.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:21.707Z,1520524161.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:21.738Z,1520524161.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:22.113Z,1520524162.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:22.135Z,1520524162.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:22.495Z,1520524162.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:22.520Z,1520524162.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:22.885Z,1520524162.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:22.908Z,1520524162.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:23.315Z,1520524163.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:23.336Z,1520524163.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:23.716Z,1520524163.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:23.731Z,1520524163.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:24.114Z,1520524164.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:24.129Z,1520524164.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:24.491Z,1520524164.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:24.519Z,1520524164.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:24.894Z,1520524164.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:24.931Z,1520524164.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:25.297Z,1520524165.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:25.337Z,1520524165.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:25.717Z,1520524165.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:25.732Z,1520524165.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:26.117Z,1520524166.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:26.136Z,1520524166.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:26.491Z,1520524166.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:26.519Z,1520524166.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:26.891Z,1520524166.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:26.927Z,1520524166.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:27.305Z,1520524167.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:27.332Z,1520524167.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:27.697Z,1520524167.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:27.712Z,1520524167.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:28.109Z,1520524168.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:28.138Z,1520524168.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:28.496Z,1520524168.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:28.511Z,1520524168.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:28.888Z,1520524168.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:28.903Z,1520524168.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:29.309Z,1520524169.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:29.334Z,1520524169.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:29.709Z,1520524169.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:29.738Z,1520524169.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:30.114Z,1520524170.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:30.140Z,1520524170.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:30.498Z,1520524170.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:30.539Z,1520524170.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:30.895Z,1520524170.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:30.910Z,1520524170.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:31.301Z,1520524171.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:31.316Z,1520524171.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:31.709Z,1520524171.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:31.724Z,1520524171.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:32.112Z,1520524172.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:32.127Z,1520524172.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:32.500Z,1520524172.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:32.522Z,1520524172.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:32.903Z,1520524172.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:32.932Z,1520524172.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:33.308Z,1520524173.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:33.323Z,1520524173.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:33.706Z,1520524173.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:33.721Z,1520524173.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:34.108Z,1520524174.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:34.123Z,1520524174.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:34.503Z,1520524174.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:34.518Z,1520524174.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:34.895Z,1520524174.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:34.912Z,1520524174.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:38.010Z,1520524178.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:38.026Z,1520524178.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:38.144Z,1520524178.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:38.180Z,1520524178.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:38.521Z,1520524178.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:38.562Z,1520524178.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:38.906Z,1520524178.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:38.921Z,1520524178.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:39.305Z,1520524179.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:39.330Z,1520524179.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:39.709Z,1520524179.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:39.724Z,1520524179.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:40.106Z,1520524180.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:40.127Z,1520524180.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:40.508Z,1520524180.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:40.532Z,1520524180.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:40.920Z,1520524180.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:40.941Z,1520524180.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:41.317Z,1520524181.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:41.361Z,1520524181.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:41.707Z,1520524181.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:41.723Z,1520524181.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:42.095Z,1520524182.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:42.129Z,1520524182.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:42.506Z,1520524182.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:42.522Z,1520524182.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:42.891Z,1520524182.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:42.918Z,1520524182.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:43.318Z,1520524183.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:43.335Z,1520524183.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:43.718Z,1520524183.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:43.738Z,1520524183.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:44.117Z,1520524184.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:44.138Z,1520524184.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:44.496Z,1520524184.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:44.534Z,1520524184.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:44.892Z,1520524184.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:44.930Z,1520524184.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:45.312Z,1520524185.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:45.328Z,1520524185.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:45.724Z,1520524185.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:45.743Z,1520524185.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:46.118Z,1520524186.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:46.144Z,1520524186.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:46.496Z,1520524186.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:46.536Z,1520524186.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:46.899Z,1520524186.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:46.926Z,1520524186.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:47.305Z,1520524187.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:47.344Z,1520524187.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:47.721Z,1520524187.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:47.737Z,1520524187.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:48.120Z,1520524188.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:48.135Z,1520524188.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:48.495Z,1520524188.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:48.531Z,1520524188.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:48.899Z,1520524188.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:48.935Z,1520524188.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:49.320Z,1520524189.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:49.336Z,1520524189.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:49.711Z,1520524189.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:49.735Z,1520524189.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:50.116Z,1520524190.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:50.135Z,1520524190.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:50.495Z,1520524190.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:50.534Z,1520524190.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:50.889Z,1520524190.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:50.904Z,1520524190.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:51.301Z,1520524191.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:51.339Z,1520524191.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:51.722Z,1520524191.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:51.744Z,1520524191.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:52.109Z,1520524192.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:52.143Z,1520524192.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:52.495Z,1520524192.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:52.538Z,1520524192.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:52.894Z,1520524192.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:52.939Z,1520524192.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:53.301Z,1520524193.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:53.338Z,1520524193.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:53.709Z,1520524193.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:53.745Z,1520524193.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:54.113Z,1520524194.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:54.140Z,1520524194.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:54.504Z,1520524194.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:54.519Z,1520524194.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:54.903Z,1520524194.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:54.918Z,1520524194.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:55.305Z,1520524195.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:55.321Z,1520524195.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:55.706Z,1520524195.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:55.721Z,1520524195.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:56.117Z,1520524196.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:56.150Z,1520524196.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:56.516Z,1520524196.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:56.531Z,1520524196.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:56.888Z,1520524196.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:56.934Z,1520524196.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:57.317Z,1520524197.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:57.332Z,1520524197.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:57.717Z,1520524197.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:57.732Z,1520524197.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:58.113Z,1520524198.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:58.129Z,1520524198.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:58.508Z,1520524198.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:58.527Z,1520524198.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:58.908Z,1520524198.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:58.931Z,1520524198.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:59.306Z,1520524199.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:59.327Z,1520524199.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:49:59.715Z,1520524199.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:49:59.731Z,1520524199.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:00.116Z,1520524200.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:00.140Z,1520524200.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:00.508Z,1520524200.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:00.523Z,1520524200.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:00.904Z,1520524200.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:00.926Z,1520524200.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:01.316Z,1520524201.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:01.334Z,1520524201.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:01.709Z,1520524201.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:01.729Z,1520524201.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:02.116Z,1520524202.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:02.131Z,1520524202.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:02.495Z,1520524202.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:02.530Z,1520524202.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:02.888Z,1520524202.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:02.915Z,1520524202.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:03.317Z,1520524203.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:03.338Z,1520524203.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:03.718Z,1520524203.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:03.733Z,1520524203.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:04.101Z,1520524204.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:04.137Z,1520524204.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:04.499Z,1520524204.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:04.525Z,1520524204.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:04.895Z,1520524204.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:04.934Z,1520524204.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:05.313Z,1520524205.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:05.332Z,1520524205.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:05.717Z,1520524205.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:05.733Z,1520524205.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:06.121Z,1520524206.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:06.144Z,1520524206.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:06.498Z,1520524206.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:06.528Z,1520524206.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:06.895Z,1520524206.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:06.926Z,1520524206.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:07.315Z,1520524207.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:07.336Z,1520524207.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:07.709Z,1520524207.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:07.753Z,1520524207.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:08.118Z,1520524208.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:08.139Z,1520524208.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:08.495Z,1520524208.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:08.530Z,1520524208.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:08.888Z,1520524208.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:08.903Z,1520524208.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:09.304Z,1520524209.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:09.350Z,1520524209.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:09.713Z,1520524209.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:09.745Z,1520524209.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:10.113Z,1520524210.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:10.158Z,1520524210.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:10.503Z,1520524210.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:10.539Z,1520524210.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:10.902Z,1520524210.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:10.917Z,1520524210.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:11.301Z,1520524211.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:11.317Z,1520524211.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:11.717Z,1520524211.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:11.743Z,1520524211.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:12.113Z,1520524212.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:12.151Z,1520524212.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:12.500Z,1520524212.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:12.515Z,1520524212.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:12.904Z,1520524212.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:12.919Z,1520524212.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:13.317Z,1520524213.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:13.348Z,1520524213.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:13.705Z,1520524213.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:13.720Z,1520524213.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:14.117Z,1520524214.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:14.153Z,1520524214.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:14.508Z,1520524214.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:14.553Z,1520524214.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:14.892Z,1520524214.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:14.923Z,1520524214.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:15.313Z,1520524215.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:15.329Z,1520524215.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:15.713Z,1520524215.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:15.728Z,1520524215.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:16.110Z,1520524216.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:16.136Z,1520524216.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:16.508Z,1520524216.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:16.530Z,1520524216.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:16.904Z,1520524216.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:16.920Z,1520524216.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:17.311Z,1520524217.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:17.326Z,1520524217.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:17.716Z,1520524217.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:17.737Z,1520524217.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:18.117Z,1520524218.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:18.132Z,1520524218.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:18.508Z,1520524218.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:18.523Z,1520524218.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:18.903Z,1520524218.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:18.922Z,1520524218.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:19.318Z,1520524219.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:19.338Z,1520524219.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:19.713Z,1520524219.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:19.728Z,1520524219.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:20.117Z,1520524220.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:20.132Z,1520524220.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:20.504Z,1520524220.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:20.519Z,1520524220.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:20.891Z,1520524220.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:20.933Z,1520524220.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:21.317Z,1520524221.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:21.332Z,1520524221.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:21.717Z,1520524221.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:21.733Z,1520524221.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:22.117Z,1520524222.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:22.135Z,1520524222.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:22.507Z,1520524222.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:22.525Z,1520524222.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:22.895Z,1520524222.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:22.922Z,1520524222.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:23.313Z,1520524223.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:23.329Z,1520524223.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:23.720Z,1520524223.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:23.740Z,1520524223.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:24.122Z,1520524224.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:24.142Z,1520524224.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:24.509Z,1520524224.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:24.546Z,1520524224.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:24.907Z,1520524224.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:24.923Z,1520524224.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:25.321Z,1520524225.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:25.342Z,1520524225.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:25.721Z,1520524225.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:25.741Z,1520524225.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:26.117Z,1520524226.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:26.165Z,1520524226.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:26.496Z,1520524226.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:26.536Z,1520524226.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:26.910Z,1520524226.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:26.925Z,1520524226.925 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:26.925Z,1520524226.925 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 162
2018-03-08T15:50:26.925Z,1520524226.925 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T15:50:26.927Z,1520524226.927 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:26.927Z,1520524226.927 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 162
2018-03-08T15:50:26.927Z,1520524226.927 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T15:50:26.929Z,1520524226.929 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:26.929Z,1520524226.929 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 162
2018-03-08T15:50:26.929Z,1520524226.929 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T15:50:26.947Z,1520524226.947 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T15:50:26.947Z,1520524226.947 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T15:50:26.947Z,1520524226.947 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T15:50:27.309Z,1520524227.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:27.365Z,1520524227.365 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T15:50:27.365Z,1520524227.365 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 162
2018-03-08T15:50:27.365Z,1520524227.365 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T15:50:27.366Z,1520524227.366 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 162
2018-03-08T15:50:27.366Z,1520524227.366 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T15:50:27.366Z,1520524227.366 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 162
2018-03-08T15:50:27.718Z,1520524227.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:27.738Z,1520524227.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T15:50:27.739Z,1520524227.739 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:50:27.739Z,1520524227.739 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:50:27.739Z,1520524227.739 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T15:50:27.740Z,1520524227.740 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:50:27.740Z,1520524227.740 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:50:27.741Z,1520524227.741 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T15:50:27.741Z,1520524227.741 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:50:27.741Z,1520524227.741 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:50:28.106Z,1520524228.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:28.147Z,1520524228.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T15:50:28.149Z,1520524228.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:28.500Z,1520524228.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:28.529Z,1520524228.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T15:50:28.529Z,1520524228.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:28.895Z,1520524228.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:28.919Z,1520524228.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T15:50:28.925Z,1520524228.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:29.306Z,1520524229.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:29.333Z,1520524229.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T15:50:29.334Z,1520524229.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:29.726Z,1520524229.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:29.743Z,1520524229.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T15:50:29.745Z,1520524229.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:30.123Z,1520524230.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:30.144Z,1520524230.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T15:50:30.145Z,1520524230.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:30.495Z,1520524230.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:30.535Z,1520524230.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T15:50:30.536Z,1520524230.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:30.898Z,1520524230.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:30.913Z,1520524230.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T15:50:30.914Z,1520524230.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:31.317Z,1520524231.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:31.347Z,1520524231.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T15:50:31.349Z,1520524231.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:31.717Z,1520524231.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:31.754Z,1520524231.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T15:50:31.755Z,1520524231.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:32.113Z,1520524232.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:32.144Z,1520524232.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T15:50:32.145Z,1520524232.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:32.502Z,1520524232.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:32.516Z,1520524232.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T15:50:32.517Z,1520524232.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:32.900Z,1520524232.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:32.915Z,1520524232.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T15:50:32.916Z,1520524232.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:33.317Z,1520524233.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:33.357Z,1520524233.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T15:50:33.358Z,1520524233.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:33.361Z,1520524233.361 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T15:45:32.0Z
2018-03-08T15:50:33.361Z,1520524233.361 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T15:50:33.361Z,1520524233.361 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T15:50:33.718Z,1520524233.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:33.752Z,1520524233.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T15:50:33.754Z,1520524233.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:34.202Z,1520524234.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:34.219Z,1520524234.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-08T15:50:34.220Z,1520524234.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:34.505Z,1520524234.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:34.553Z,1520524234.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T15:50:34.554Z,1520524234.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:37.605Z,1520524237.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:37.620Z,1520524237.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-03-08T15:50:37.621Z,1520524237.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:37.717Z,1520524237.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:37.765Z,1520524237.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T15:50:37.766Z,1520524237.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:38.074Z,1520524238.074 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180308T074127/Courier0188.lzma
2018-03-08T15:50:38.113Z,1520524238.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:38.153Z,1520524238.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T15:50:38.154Z,1520524238.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:38.513Z,1520524238.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:38.534Z,1520524238.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T15:50:38.535Z,1520524238.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:38.867Z,1520524238.867 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0188.lzma.bak
2018-03-08T15:50:38.867Z,1520524238.867 [DataOverHttps](INFO): SBD MOMSN=7987022
2018-03-08T15:50:38.910Z,1520524238.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:38.930Z,1520524238.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T15:50:38.931Z,1520524238.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:39.488Z,1520524239.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:39.512Z,1520524239.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2018-03-08T15:50:39.513Z,1520524239.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:39.691Z,1520524239.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:39.743Z,1520524239.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T15:50:39.744Z,1520524239.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:42.813Z,1520524242.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:42.828Z,1520524242.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2018-03-08T15:50:42.829Z,1520524242.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:42.955Z,1520524242.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:42.971Z,1520524242.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T15:50:42.972Z,1520524242.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:43.305Z,1520524243.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:43.339Z,1520524243.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T15:50:43.340Z,1520524243.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:43.678Z,1520524243.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:43.692Z,1520524243.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T15:50:43.717Z,1520524243.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:44.079Z,1520524244.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:44.110Z,1520524244.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T15:50:44.111Z,1520524244.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:44.483Z,1520524244.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:44.521Z,1520524244.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T15:50:44.522Z,1520524244.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:44.877Z,1520524244.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:44.892Z,1520524244.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T15:50:44.893Z,1520524244.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:48.029Z,1520524248.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:48.045Z,1520524248.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:48.168Z,1520524248.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:48.184Z,1520524248.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:48.493Z,1520524248.493 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180308T074127/Express0189.lzma
2018-03-08T15:50:48.530Z,1520524248.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:48.570Z,1520524248.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:48.918Z,1520524248.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:48.934Z,1520524248.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:49.291Z,1520524249.291 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0189.lzma.bak
2018-03-08T15:50:49.291Z,1520524249.291 [DataOverHttps](INFO): SBD MOMSN=7987025
2018-03-08T15:50:49.338Z,1520524249.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:49.355Z,1520524249.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:49.897Z,1520524249.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:49.931Z,1520524249.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:49.934Z,1520524249.934 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T15:50:49.934Z,1520524249.934 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T15:50:49.934Z,1520524249.934 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T15:50:50.106Z,1520524250.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:50.150Z,1520524250.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:50.534Z,1520524250.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:50.680Z,1520524250.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:53.630Z,1520524253.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:53.645Z,1520524253.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:53.756Z,1520524253.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:53.787Z,1520524253.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:54.127Z,1520524254.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:54.172Z,1520524254.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:54.535Z,1520524254.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:54.559Z,1520524254.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:54.919Z,1520524254.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:54.971Z,1520524254.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:55.332Z,1520524255.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:55.356Z,1520524255.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:55.741Z,1520524255.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:55.756Z,1520524255.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:56.139Z,1520524256.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:56.179Z,1520524256.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:56.531Z,1520524256.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:56.578Z,1520524256.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:56.928Z,1520524256.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:56.947Z,1520524256.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:57.312Z,1520524257.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:57.354Z,1520524257.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:57.735Z,1520524257.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:57.750Z,1520524257.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:58.131Z,1520524258.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:58.179Z,1520524258.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:58.532Z,1520524258.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:58.554Z,1520524258.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:58.941Z,1520524258.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:58.957Z,1520524258.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:59.340Z,1520524259.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:59.355Z,1520524259.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:50:59.717Z,1520524259.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:50:59.763Z,1520524259.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:00.131Z,1520524260.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:00.156Z,1520524260.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:00.534Z,1520524260.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:00.553Z,1520524260.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:00.921Z,1520524260.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:00.947Z,1520524260.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:01.337Z,1520524261.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:01.377Z,1520524261.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:01.737Z,1520524261.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:01.757Z,1520524261.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:02.130Z,1520524262.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:02.159Z,1520524262.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:02.535Z,1520524262.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:02.564Z,1520524262.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:02.931Z,1520524262.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:02.964Z,1520524262.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:03.334Z,1520524263.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:03.355Z,1520524263.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:03.745Z,1520524263.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:03.760Z,1520524263.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:04.149Z,1520524264.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:04.163Z,1520524264.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:04.530Z,1520524264.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:04.586Z,1520524264.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:04.931Z,1520524264.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:04.953Z,1520524264.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:05.319Z,1520524265.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:05.362Z,1520524265.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:05.719Z,1520524265.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:05.753Z,1520524265.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:06.118Z,1520524266.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:06.159Z,1520524266.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:06.550Z,1520524266.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:06.566Z,1520524266.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:06.935Z,1520524266.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:06.959Z,1520524266.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:07.346Z,1520524267.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:07.361Z,1520524267.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:07.719Z,1520524267.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:07.764Z,1520524267.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:08.116Z,1520524268.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:08.160Z,1520524268.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:08.524Z,1520524268.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:08.558Z,1520524268.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:08.919Z,1520524268.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:08.952Z,1520524268.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:09.329Z,1520524269.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:09.370Z,1520524269.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:09.748Z,1520524269.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:09.766Z,1520524269.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:10.137Z,1520524270.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:10.162Z,1520524270.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:10.516Z,1520524270.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:10.562Z,1520524270.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:10.919Z,1520524270.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:10.967Z,1520524270.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:11.345Z,1520524271.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:11.363Z,1520524271.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:11.725Z,1520524271.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:11.758Z,1520524271.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:12.136Z,1520524272.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:12.170Z,1520524272.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:12.523Z,1520524272.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:12.587Z,1520524272.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:12.913Z,1520524272.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:12.928Z,1520524272.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:13.320Z,1520524273.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:13.344Z,1520524273.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:13.719Z,1520524273.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:13.739Z,1520524273.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:14.123Z,1520524274.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:14.139Z,1520524274.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:14.530Z,1520524274.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:14.558Z,1520524274.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:14.946Z,1520524274.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:14.984Z,1520524274.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:15.337Z,1520524275.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:15.367Z,1520524275.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:15.726Z,1520524275.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:15.765Z,1520524275.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:16.125Z,1520524276.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:16.140Z,1520524276.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:16.528Z,1520524276.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:16.566Z,1520524276.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:16.929Z,1520524276.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:16.947Z,1520524276.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:17.341Z,1520524277.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:17.378Z,1520524277.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:17.726Z,1520524277.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:17.743Z,1520524277.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:18.145Z,1520524278.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:18.168Z,1520524278.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:18.530Z,1520524278.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:18.547Z,1520524278.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:18.923Z,1520524278.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:18.969Z,1520524278.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:19.328Z,1520524279.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:19.349Z,1520524279.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:19.728Z,1520524279.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:19.749Z,1520524279.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:20.131Z,1520524280.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:20.148Z,1520524280.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:20.542Z,1520524280.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:20.578Z,1520524280.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:20.933Z,1520524280.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:20.954Z,1520524280.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:21.328Z,1520524281.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:21.349Z,1520524281.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:21.728Z,1520524281.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:21.763Z,1520524281.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:22.131Z,1520524282.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:22.176Z,1520524282.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:22.530Z,1520524282.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:22.552Z,1520524282.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:22.928Z,1520524282.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:22.949Z,1520524282.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:23.340Z,1520524283.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:23.355Z,1520524283.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:23.730Z,1520524283.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:23.771Z,1520524283.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:24.135Z,1520524284.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:24.155Z,1520524284.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:24.530Z,1520524284.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:24.550Z,1520524284.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:24.928Z,1520524284.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:24.946Z,1520524284.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:25.327Z,1520524285.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:25.376Z,1520524285.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:25.731Z,1520524285.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:25.753Z,1520524285.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:26.130Z,1520524286.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:26.151Z,1520524286.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:26.539Z,1520524286.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:26.562Z,1520524286.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:26.941Z,1520524286.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:26.978Z,1520524286.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:27.330Z,1520524287.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:27.364Z,1520524287.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:27.731Z,1520524287.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:27.752Z,1520524287.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:28.119Z,1520524288.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:28.159Z,1520524288.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:28.523Z,1520524288.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:28.570Z,1520524288.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:28.922Z,1520524288.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:28.958Z,1520524288.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:29.346Z,1520524289.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:29.371Z,1520524289.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:29.742Z,1520524289.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:29.758Z,1520524289.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:30.137Z,1520524290.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:30.174Z,1520524290.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:30.522Z,1520524290.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:30.558Z,1520524290.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:30.912Z,1520524290.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:30.943Z,1520524290.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:31.346Z,1520524291.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:31.361Z,1520524291.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:31.743Z,1520524291.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:31.774Z,1520524291.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:32.143Z,1520524292.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:32.162Z,1520524292.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:32.519Z,1520524292.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:32.555Z,1520524292.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:32.924Z,1520524292.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:32.956Z,1520524292.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:33.315Z,1520524293.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:33.358Z,1520524293.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:33.723Z,1520524293.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:33.757Z,1520524293.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:34.119Z,1520524294.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:34.160Z,1520524294.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:34.535Z,1520524294.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:34.563Z,1520524294.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:34.946Z,1520524294.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:34.978Z,1520524294.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:35.351Z,1520524295.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:35.397Z,1520524295.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:35.712Z,1520524295.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:35.763Z,1520524295.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:36.119Z,1520524296.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:36.155Z,1520524296.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:36.522Z,1520524296.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:36.556Z,1520524296.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:36.916Z,1520524296.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:36.936Z,1520524296.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:37.335Z,1520524297.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:37.365Z,1520524297.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:37.740Z,1520524297.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:37.772Z,1520524297.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:38.138Z,1520524298.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:38.168Z,1520524298.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:38.523Z,1520524298.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:38.548Z,1520524298.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:38.928Z,1520524298.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:38.965Z,1520524298.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:39.326Z,1520524299.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:39.345Z,1520524299.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:39.728Z,1520524299.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:39.778Z,1520524299.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:40.124Z,1520524300.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:40.140Z,1520524300.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:40.529Z,1520524300.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:40.550Z,1520524300.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:40.943Z,1520524300.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:40.975Z,1520524300.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:41.342Z,1520524301.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:41.382Z,1520524301.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:41.728Z,1520524301.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:41.746Z,1520524301.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:42.128Z,1520524302.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:42.149Z,1520524302.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:42.531Z,1520524302.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:42.548Z,1520524302.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:42.928Z,1520524302.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:42.973Z,1520524302.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:43.344Z,1520524303.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:43.375Z,1520524303.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:43.745Z,1520524303.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:43.776Z,1520524303.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:44.132Z,1520524304.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:44.148Z,1520524304.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:44.530Z,1520524304.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:44.574Z,1520524304.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:44.931Z,1520524304.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:44.953Z,1520524304.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:45.336Z,1520524305.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:45.354Z,1520524305.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:45.741Z,1520524305.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:45.756Z,1520524305.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:46.138Z,1520524306.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:46.179Z,1520524306.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:46.531Z,1520524306.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:46.555Z,1520524306.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:46.930Z,1520524306.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:46.950Z,1520524306.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:47.336Z,1520524307.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:47.351Z,1520524307.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:47.729Z,1520524307.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:47.779Z,1520524307.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:48.128Z,1520524308.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:48.148Z,1520524308.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:48.541Z,1520524308.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:48.557Z,1520524308.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:48.940Z,1520524308.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:48.962Z,1520524308.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:49.342Z,1520524309.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:49.382Z,1520524309.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:49.733Z,1520524309.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:49.754Z,1520524309.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:50.131Z,1520524310.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:50.152Z,1520524310.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:50.537Z,1520524310.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:50.553Z,1520524310.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:53.653Z,1520524313.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:53.686Z,1520524313.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:53.698Z,1520524313.698 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T15:51:53.786Z,1520524313.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:53.807Z,1520524313.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:54.154Z,1520524314.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:54.182Z,1520524314.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:54.556Z,1520524314.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:54.585Z,1520524314.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:54.942Z,1520524314.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:54.967Z,1520524314.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:55.349Z,1520524315.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:55.370Z,1520524315.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:55.746Z,1520524315.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:55.775Z,1520524315.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:56.135Z,1520524316.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:56.185Z,1520524316.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:56.549Z,1520524316.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:56.570Z,1520524316.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:56.954Z,1520524316.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:56.970Z,1520524316.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:57.349Z,1520524317.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:57.394Z,1520524317.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:57.748Z,1520524317.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:57.788Z,1520524317.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:58.149Z,1520524318.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:58.164Z,1520524318.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:58.550Z,1520524318.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:58.566Z,1520524318.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:58.943Z,1520524318.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:58.974Z,1520524318.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:59.352Z,1520524319.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:59.368Z,1520524319.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:51:59.753Z,1520524319.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:51:59.769Z,1520524319.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:00.152Z,1520524320.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:00.168Z,1520524320.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:00.545Z,1520524320.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:00.571Z,1520524320.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:00.944Z,1520524320.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:00.963Z,1520524320.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.391886 seconds old.
2018-03-08T15:52:00.964Z,1520524320.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:00.965Z,1520524320.965 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.392223 seconds old.
2018-03-08T15:52:00.966Z,1520524320.966 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.392703 seconds old.
2018-03-08T15:52:01.340Z,1520524321.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:01.369Z,1520524321.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.798530 seconds old.
2018-03-08T15:52:01.370Z,1520524321.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:01.371Z,1520524321.371 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.798876 seconds old.
2018-03-08T15:52:01.372Z,1520524321.372 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.799129 seconds old.
2018-03-08T15:52:01.749Z,1520524321.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:01.763Z,1520524321.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.191842 seconds old.
2018-03-08T15:52:01.764Z,1520524321.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:01.765Z,1520524321.765 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.192168 seconds old.
2018-03-08T15:52:01.766Z,1520524321.766 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.192495 seconds old.
2018-03-08T15:52:02.144Z,1520524322.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:02.189Z,1520524322.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.618338 seconds old.
2018-03-08T15:52:02.190Z,1520524322.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:02.191Z,1520524322.191 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.618668 seconds old.
2018-03-08T15:52:02.192Z,1520524322.192 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.618904 seconds old.
2018-03-08T15:52:02.557Z,1520524322.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:02.572Z,1520524322.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:02.958Z,1520524322.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:02.973Z,1520524322.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:03.355Z,1520524323.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:03.378Z,1520524323.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:03.743Z,1520524323.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:03.778Z,1520524323.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:04.147Z,1520524324.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:04.164Z,1520524324.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:04.550Z,1520524324.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:04.566Z,1520524324.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:04.941Z,1520524324.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:04.961Z,1520524324.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:05.357Z,1520524325.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:05.375Z,1520524325.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:05.757Z,1520524325.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:05.773Z,1520524325.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:06.154Z,1520524326.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:06.177Z,1520524326.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:06.538Z,1520524326.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:06.566Z,1520524326.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:06.935Z,1520524326.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:06.968Z,1520524326.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:07.331Z,1520524327.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:07.365Z,1520524327.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:07.731Z,1520524327.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:07.771Z,1520524327.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:08.137Z,1520524328.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:08.171Z,1520524328.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:08.546Z,1520524328.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:08.587Z,1520524328.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:08.956Z,1520524328.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:08.980Z,1520524328.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:09.352Z,1520524329.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:09.382Z,1520524329.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:09.745Z,1520524329.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:09.779Z,1520524329.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:10.135Z,1520524330.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:10.171Z,1520524330.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:10.540Z,1520524330.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:10.578Z,1520524330.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:10.938Z,1520524330.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:10.955Z,1520524330.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:11.353Z,1520524331.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:11.379Z,1520524331.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:11.754Z,1520524331.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:11.783Z,1520524331.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:12.155Z,1520524332.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:12.187Z,1520524332.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:12.542Z,1520524332.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:12.557Z,1520524332.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:12.944Z,1520524332.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:12.960Z,1520524332.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:13.337Z,1520524333.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:13.380Z,1520524333.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:13.739Z,1520524333.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:13.759Z,1520524333.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:14.139Z,1520524334.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:14.165Z,1520524334.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:14.544Z,1520524334.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:14.560Z,1520524334.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:14.954Z,1520524334.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:14.982Z,1520524334.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:15.356Z,1520524335.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:15.383Z,1520524335.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:15.743Z,1520524335.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:15.759Z,1520524335.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:16.144Z,1520524336.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:16.159Z,1520524336.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:16.541Z,1520524336.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:16.583Z,1520524336.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:16.941Z,1520524336.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:16.961Z,1520524336.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:17.344Z,1520524337.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:17.360Z,1520524337.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:17.753Z,1520524337.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:17.787Z,1520524337.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:18.142Z,1520524338.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:18.182Z,1520524338.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:18.539Z,1520524338.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:18.559Z,1520524338.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:18.943Z,1520524338.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:18.959Z,1520524338.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:19.344Z,1520524339.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:19.359Z,1520524339.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:19.741Z,1520524339.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:19.768Z,1520524339.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:20.140Z,1520524340.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:20.160Z,1520524340.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:20.554Z,1520524340.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:20.587Z,1520524340.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:20.954Z,1520524340.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:20.990Z,1520524340.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:21.346Z,1520524341.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:21.386Z,1520524341.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:21.738Z,1520524341.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:21.782Z,1520524341.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:22.143Z,1520524342.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:22.167Z,1520524342.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:22.545Z,1520524342.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:22.561Z,1520524342.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:22.941Z,1520524342.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:22.983Z,1520524342.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:23.356Z,1520524343.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:23.389Z,1520524343.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:23.755Z,1520524343.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:23.785Z,1520524343.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:24.153Z,1520524344.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:24.187Z,1520524344.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:24.541Z,1520524344.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:24.568Z,1520524344.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:24.941Z,1520524344.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:24.961Z,1520524344.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:25.342Z,1520524345.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:25.357Z,1520524345.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:25.752Z,1520524345.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:25.767Z,1520524345.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:26.143Z,1520524346.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:26.188Z,1520524346.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:26.546Z,1520524346.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:26.565Z,1520524346.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:26.949Z,1520524346.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:26.986Z,1520524346.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:27.344Z,1520524347.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:27.385Z,1520524347.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:27.741Z,1520524347.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:27.774Z,1520524347.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:28.138Z,1520524348.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:28.158Z,1520524348.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:28.544Z,1520524348.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:28.566Z,1520524348.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:28.949Z,1520524348.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:28.964Z,1520524348.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:29.350Z,1520524349.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:29.391Z,1520524349.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:29.747Z,1520524349.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:29.790Z,1520524349.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:30.152Z,1520524350.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:30.171Z,1520524350.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:30.534Z,1520524350.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:30.566Z,1520524350.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:30.928Z,1520524350.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:30.970Z,1520524350.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:31.331Z,1520524351.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:31.374Z,1520524351.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:31.738Z,1520524351.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:31.768Z,1520524351.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:32.137Z,1520524352.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:32.165Z,1520524352.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:32.542Z,1520524352.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:32.576Z,1520524352.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:32.963Z,1520524352.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:32.979Z,1520524352.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:33.340Z,1520524353.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:33.379Z,1520524353.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:33.734Z,1520524353.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:33.765Z,1520524353.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:34.139Z,1520524354.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:34.174Z,1520524354.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:34.537Z,1520524354.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:34.578Z,1520524354.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:34.934Z,1520524354.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:34.953Z,1520524354.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:35.353Z,1520524355.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:35.380Z,1520524355.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:35.745Z,1520524355.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:35.786Z,1520524355.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:36.151Z,1520524356.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:36.187Z,1520524356.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:36.543Z,1520524356.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:36.558Z,1520524356.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:36.929Z,1520524356.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:36.955Z,1520524356.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:37.337Z,1520524357.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:37.382Z,1520524357.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:37.739Z,1520524357.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:37.760Z,1520524357.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:38.139Z,1520524358.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:38.157Z,1520524358.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:38.547Z,1520524358.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:38.563Z,1520524358.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:38.954Z,1520524358.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:38.988Z,1520524358.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:39.340Z,1520524359.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:39.386Z,1520524359.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:39.743Z,1520524359.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:39.790Z,1520524359.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:40.144Z,1520524360.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:40.159Z,1520524360.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:40.541Z,1520524360.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:40.585Z,1520524360.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:40.937Z,1520524360.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:40.967Z,1520524360.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:41.355Z,1520524361.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:41.393Z,1520524361.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:41.744Z,1520524361.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:41.759Z,1520524361.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:42.143Z,1520524362.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:42.182Z,1520524362.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:42.539Z,1520524362.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:42.558Z,1520524362.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:42.931Z,1520524362.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:42.957Z,1520524362.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:43.341Z,1520524363.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:43.363Z,1520524363.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:43.741Z,1520524363.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:43.768Z,1520524363.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:44.128Z,1520524364.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:44.156Z,1520524364.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:44.555Z,1520524364.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:44.587Z,1520524364.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:44.947Z,1520524364.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:44.961Z,1520524364.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:45.340Z,1520524365.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:45.381Z,1520524365.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:45.738Z,1520524365.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:45.759Z,1520524365.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:46.141Z,1520524366.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:46.167Z,1520524366.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:46.545Z,1520524366.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:46.560Z,1520524366.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:46.941Z,1520524366.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:46.983Z,1520524366.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:47.355Z,1520524367.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:47.390Z,1520524367.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:47.743Z,1520524367.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:47.766Z,1520524367.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:48.150Z,1520524368.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:48.165Z,1520524368.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:48.546Z,1520524368.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:48.593Z,1520524368.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:48.941Z,1520524368.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:48.986Z,1520524368.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:49.343Z,1520524369.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:49.358Z,1520524369.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:49.750Z,1520524369.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:49.764Z,1520524369.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:50.142Z,1520524370.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:50.181Z,1520524370.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:50.546Z,1520524370.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:50.564Z,1520524370.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:53.642Z,1520524373.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:53.657Z,1520524373.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:53.764Z,1520524373.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:53.795Z,1520524373.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:54.151Z,1520524374.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:54.166Z,1520524374.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:54.549Z,1520524374.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:54.564Z,1520524374.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:54.937Z,1520524374.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:54.970Z,1520524374.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:55.359Z,1520524375.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:55.391Z,1520524375.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:55.755Z,1520524375.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:55.771Z,1520524375.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:56.153Z,1520524376.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:56.169Z,1520524376.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:56.542Z,1520524376.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:56.584Z,1520524376.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:56.950Z,1520524376.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:56.975Z,1520524376.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:57.332Z,1520524377.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:57.360Z,1520524377.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:57.745Z,1520524377.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:57.773Z,1520524377.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:58.149Z,1520524378.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:58.175Z,1520524378.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:58.551Z,1520524378.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:58.594Z,1520524378.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:58.958Z,1520524378.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:58.975Z,1520524378.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:59.356Z,1520524379.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:59.371Z,1520524379.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:52:59.737Z,1520524379.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:52:59.775Z,1520524379.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:00.147Z,1520524380.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:00.165Z,1520524380.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:00.549Z,1520524380.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:00.565Z,1520524380.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:00.934Z,1520524380.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:00.965Z,1520524380.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:01.359Z,1520524381.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:01.376Z,1520524381.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:01.760Z,1520524381.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:01.775Z,1520524381.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:02.161Z,1520524382.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:02.177Z,1520524382.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:02.588Z,1520524382.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:02.649Z,1520524382.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:02.931Z,1520524382.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:02.966Z,1520524382.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:03.341Z,1520524383.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:03.365Z,1520524383.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:03.761Z,1520524383.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:03.776Z,1520524383.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:04.152Z,1520524384.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:04.167Z,1520524384.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:04.553Z,1520524384.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:04.582Z,1520524384.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:04.964Z,1520524384.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:05.002Z,1520524385.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:05.363Z,1520524385.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:05.378Z,1520524385.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:05.738Z,1520524385.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:05.765Z,1520524385.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:06.136Z,1520524386.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:06.183Z,1520524386.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:06.536Z,1520524386.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:06.576Z,1520524386.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:06.928Z,1520524386.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:06.950Z,1520524386.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:07.367Z,1520524387.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:07.391Z,1520524387.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:07.755Z,1520524387.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:07.786Z,1520524387.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:08.168Z,1520524388.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:08.190Z,1520524388.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:08.542Z,1520524388.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:08.578Z,1520524388.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:08.939Z,1520524388.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:08.959Z,1520524388.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:09.337Z,1520524389.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:09.383Z,1520524389.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:09.745Z,1520524389.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:09.785Z,1520524389.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:10.145Z,1520524390.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:10.160Z,1520524390.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:10.547Z,1520524390.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:10.563Z,1520524390.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:10.954Z,1520524390.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:10.987Z,1520524390.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:11.347Z,1520524391.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:11.389Z,1520524391.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:11.732Z,1520524391.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:11.760Z,1520524391.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:12.150Z,1520524392.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:12.166Z,1520524392.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:12.545Z,1520524392.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:12.571Z,1520524392.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:12.934Z,1520524392.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:12.967Z,1520524392.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:13.359Z,1520524393.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:13.375Z,1520524393.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:13.756Z,1520524393.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:13.771Z,1520524393.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:14.155Z,1520524394.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:14.174Z,1520524394.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:14.546Z,1520524394.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:14.564Z,1520524394.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:14.931Z,1520524394.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:14.957Z,1520524394.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:15.334Z,1520524395.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:15.373Z,1520524395.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:15.736Z,1520524395.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:15.782Z,1520524395.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:16.153Z,1520524396.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:16.168Z,1520524396.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:16.547Z,1520524396.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:16.583Z,1520524396.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:16.962Z,1520524396.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:16.982Z,1520524396.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:17.361Z,1520524397.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:17.378Z,1520524397.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:17.729Z,1520524397.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:17.771Z,1520524397.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:18.151Z,1520524398.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:18.171Z,1520524398.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:18.539Z,1520524398.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:18.566Z,1520524398.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:18.932Z,1520524398.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:18.968Z,1520524398.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:19.356Z,1520524399.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:19.376Z,1520524399.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:19.764Z,1520524399.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:19.779Z,1520524399.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:20.158Z,1520524400.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:20.175Z,1520524400.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:20.535Z,1520524400.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:20.568Z,1520524400.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:20.931Z,1520524400.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:20.971Z,1520524400.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:21.329Z,1520524401.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:21.361Z,1520524401.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:21.743Z,1520524401.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:21.771Z,1520524401.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:22.135Z,1520524402.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:22.176Z,1520524402.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:22.548Z,1520524402.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:22.581Z,1520524402.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:22.963Z,1520524402.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:22.979Z,1520524402.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:23.359Z,1520524403.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:23.374Z,1520524403.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:23.732Z,1520524403.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:23.777Z,1520524403.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:24.139Z,1520524404.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:24.170Z,1520524404.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:24.539Z,1520524404.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:24.569Z,1520524404.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:24.934Z,1520524404.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:24.965Z,1520524404.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:25.350Z,1520524405.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:25.386Z,1520524405.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:25.765Z,1520524405.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:25.780Z,1520524405.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:26.149Z,1520524406.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:26.198Z,1520524406.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:26.542Z,1520524406.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:26.575Z,1520524406.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:26.936Z,1520524406.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:26.979Z,1520524406.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:27.332Z,1520524407.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:27.365Z,1520524407.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:27.743Z,1520524407.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:27.779Z,1520524407.779 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:27.779Z,1520524407.779 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 163
2018-03-08T15:53:27.779Z,1520524407.779 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T15:53:27.785Z,1520524407.785 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:27.785Z,1520524407.785 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 163
2018-03-08T15:53:27.785Z,1520524407.785 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T15:53:27.787Z,1520524407.787 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:27.787Z,1520524407.787 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 163
2018-03-08T15:53:27.787Z,1520524407.787 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T15:53:27.823Z,1520524407.823 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T15:53:27.823Z,1520524407.823 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T15:53:27.824Z,1520524407.824 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T15:53:28.145Z,1520524408.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:28.182Z,1520524408.182 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T15:53:28.182Z,1520524408.182 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 163
2018-03-08T15:53:28.183Z,1520524408.183 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T15:53:28.183Z,1520524408.183 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 163
2018-03-08T15:53:28.183Z,1520524408.183 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T15:53:28.183Z,1520524408.183 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 163
2018-03-08T15:53:28.542Z,1520524408.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:28.581Z,1520524408.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T15:53:28.582Z,1520524408.582 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:53:28.582Z,1520524408.582 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:53:28.582Z,1520524408.582 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T15:53:28.583Z,1520524408.583 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:53:28.583Z,1520524408.583 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:53:28.584Z,1520524408.584 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T15:53:28.584Z,1520524408.584 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:53:28.584Z,1520524408.584 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:53:28.951Z,1520524408.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:28.967Z,1520524408.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T15:53:28.968Z,1520524408.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:29.352Z,1520524409.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:29.366Z,1520524409.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T15:53:29.367Z,1520524409.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:29.744Z,1520524409.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:29.763Z,1520524409.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T15:53:29.764Z,1520524409.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:30.147Z,1520524410.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:30.188Z,1520524410.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T15:53:30.189Z,1520524410.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:30.552Z,1520524410.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:30.590Z,1520524410.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T15:53:30.591Z,1520524410.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:30.932Z,1520524410.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:30.960Z,1520524410.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T15:53:30.961Z,1520524410.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:31.351Z,1520524411.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:31.382Z,1520524411.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T15:53:31.383Z,1520524411.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:31.755Z,1520524411.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:31.774Z,1520524411.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T15:53:31.774Z,1520524411.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:32.156Z,1520524412.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:32.171Z,1520524412.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T15:53:32.172Z,1520524412.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:32.551Z,1520524412.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:32.577Z,1520524412.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T15:53:32.578Z,1520524412.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:32.952Z,1520524412.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:32.978Z,1520524412.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T15:53:32.978Z,1520524412.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:33.336Z,1520524413.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:33.386Z,1520524413.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T15:53:33.386Z,1520524413.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:33.745Z,1520524413.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:33.775Z,1520524413.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T15:53:33.776Z,1520524413.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:34.146Z,1520524414.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:34.178Z,1520524414.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T15:53:34.179Z,1520524414.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:34.550Z,1520524414.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:34.574Z,1520524414.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T15:53:34.575Z,1520524414.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:34.965Z,1520524414.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:34.994Z,1520524414.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T15:53:34.995Z,1520524414.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:35.359Z,1520524415.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:35.385Z,1520524415.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T15:53:35.386Z,1520524415.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:35.738Z,1520524415.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:35.755Z,1520524415.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T15:53:35.756Z,1520524415.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:36.144Z,1520524416.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:36.159Z,1520524416.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T15:53:36.160Z,1520524416.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:36.545Z,1520524416.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:36.589Z,1520524416.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T15:53:36.590Z,1520524416.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:36.938Z,1520524416.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:36.969Z,1520524416.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T15:53:36.970Z,1520524416.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:37.358Z,1520524417.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:37.386Z,1520524417.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T15:53:37.387Z,1520524417.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:37.749Z,1520524417.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:37.764Z,1520524417.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T15:53:37.765Z,1520524417.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:38.161Z,1520524418.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:38.185Z,1520524418.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T15:53:38.186Z,1520524418.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:38.559Z,1520524418.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:38.574Z,1520524418.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T15:53:38.575Z,1520524418.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:38.949Z,1520524418.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:38.971Z,1520524418.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T15:53:38.971Z,1520524418.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:39.351Z,1520524419.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:39.366Z,1520524419.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T15:53:39.367Z,1520524419.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:39.735Z,1520524419.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:39.774Z,1520524419.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T15:53:39.775Z,1520524419.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:40.153Z,1520524420.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:40.169Z,1520524420.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T15:53:40.170Z,1520524420.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:40.561Z,1520524420.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:40.577Z,1520524420.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T15:53:40.578Z,1520524420.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:40.961Z,1520524420.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:40.976Z,1520524420.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T15:53:40.977Z,1520524420.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:41.364Z,1520524421.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:41.379Z,1520524421.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T15:53:41.380Z,1520524421.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:41.751Z,1520524421.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:41.767Z,1520524421.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T15:53:41.769Z,1520524421.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:42.145Z,1520524422.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:42.166Z,1520524422.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T15:53:42.167Z,1520524422.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:42.545Z,1520524422.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:42.566Z,1520524422.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T15:53:42.567Z,1520524422.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:42.931Z,1520524422.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:42.968Z,1520524422.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T15:53:42.973Z,1520524422.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:43.362Z,1520524423.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:43.377Z,1520524423.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T15:53:43.378Z,1520524423.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:43.765Z,1520524423.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:43.780Z,1520524423.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T15:53:43.781Z,1520524423.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:44.159Z,1520524424.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:44.174Z,1520524424.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T15:53:44.175Z,1520524424.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:44.560Z,1520524424.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:44.577Z,1520524424.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T15:53:44.578Z,1520524424.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:44.936Z,1520524424.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:44.974Z,1520524424.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T15:53:44.975Z,1520524424.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:45.343Z,1520524425.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:45.386Z,1520524425.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T15:53:45.387Z,1520524425.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:45.740Z,1520524425.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:45.776Z,1520524425.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T15:53:45.777Z,1520524425.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:46.131Z,1520524426.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:46.177Z,1520524426.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T15:53:46.178Z,1520524426.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:46.549Z,1520524426.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:46.618Z,1520524426.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T15:53:46.619Z,1520524426.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:46.979Z,1520524426.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:47.002Z,1520524427.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T15:53:47.003Z,1520524427.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:47.356Z,1520524427.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:47.390Z,1520524427.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T15:53:47.391Z,1520524427.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:47.739Z,1520524427.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:47.783Z,1520524427.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:48.146Z,1520524428.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:48.196Z,1520524428.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:48.553Z,1520524428.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:48.595Z,1520524428.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:48.953Z,1520524428.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:48.985Z,1520524428.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:49.359Z,1520524429.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:49.396Z,1520524429.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:49.754Z,1520524429.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:49.793Z,1520524429.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:50.149Z,1520524430.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:50.165Z,1520524430.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:50.551Z,1520524430.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:50.567Z,1520524430.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:50.948Z,1520524430.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:50.975Z,1520524430.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:54.042Z,1520524434.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:54.075Z,1520524434.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:54.187Z,1520524434.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:54.203Z,1520524434.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:54.565Z,1520524434.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:54.593Z,1520524434.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:54.961Z,1520524434.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:54.993Z,1520524434.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:55.364Z,1520524435.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:55.384Z,1520524435.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:55.743Z,1520524435.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:55.776Z,1520524435.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:56.144Z,1520524436.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:56.175Z,1520524436.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:56.543Z,1520524436.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:56.576Z,1520524436.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:56.942Z,1520524436.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:56.975Z,1520524436.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:57.371Z,1520524437.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:57.386Z,1520524437.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:57.763Z,1520524437.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:57.779Z,1520524437.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:58.164Z,1520524438.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:58.179Z,1520524438.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:58.547Z,1520524438.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:58.574Z,1520524438.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:58.939Z,1520524438.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:58.982Z,1520524438.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:59.339Z,1520524439.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:59.375Z,1520524439.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:53:59.743Z,1520524439.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:53:59.775Z,1520524439.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:00.142Z,1520524440.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:00.175Z,1520524440.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:00.569Z,1520524440.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:00.584Z,1520524440.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:00.970Z,1520524440.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:00.991Z,1520524440.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:01.366Z,1520524441.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:01.386Z,1520524441.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:01.749Z,1520524441.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:01.773Z,1520524441.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:02.147Z,1520524442.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:02.176Z,1520524442.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:02.550Z,1520524442.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:02.594Z,1520524442.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:02.943Z,1520524442.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:02.980Z,1520524442.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:03.353Z,1520524443.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:03.383Z,1520524443.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:03.771Z,1520524443.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:03.787Z,1520524443.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:04.165Z,1520524444.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:04.181Z,1520524444.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:04.543Z,1520524444.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:04.577Z,1520524444.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:04.950Z,1520524444.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:04.975Z,1520524444.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:05.343Z,1520524445.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:05.374Z,1520524445.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:05.741Z,1520524445.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:05.778Z,1520524445.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:06.150Z,1520524446.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:06.176Z,1520524446.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:06.565Z,1520524446.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:06.581Z,1520524446.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:06.954Z,1520524446.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:06.983Z,1520524446.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:07.373Z,1520524447.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:07.388Z,1520524447.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:07.746Z,1520524447.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:07.776Z,1520524447.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:08.155Z,1520524448.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:08.191Z,1520524448.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:08.549Z,1520524448.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:08.594Z,1520524448.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:08.952Z,1520524448.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:08.994Z,1520524448.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:09.361Z,1520524449.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:09.393Z,1520524449.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:09.769Z,1520524449.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:09.798Z,1520524449.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:10.155Z,1520524450.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:10.175Z,1520524450.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:10.554Z,1520524450.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:10.570Z,1520524450.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:10.956Z,1520524450.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:10.975Z,1520524450.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:11.356Z,1520524451.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:11.370Z,1520524451.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:11.750Z,1520524451.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:11.791Z,1520524451.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:12.154Z,1520524452.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:12.191Z,1520524452.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:12.558Z,1520524452.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:12.573Z,1520524452.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:12.969Z,1520524452.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:12.997Z,1520524452.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:13.353Z,1520524453.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:13.373Z,1520524453.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:13.754Z,1520524453.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:13.769Z,1520524453.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:14.155Z,1520524454.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:14.171Z,1520524454.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:14.556Z,1520524454.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:14.571Z,1520524454.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:14.951Z,1520524454.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:14.994Z,1520524454.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:15.356Z,1520524455.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:15.398Z,1520524455.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:15.759Z,1520524455.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:15.775Z,1520524455.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:16.156Z,1520524456.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:16.171Z,1520524456.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:16.550Z,1520524456.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:16.591Z,1520524456.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:16.954Z,1520524456.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:16.992Z,1520524456.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:17.356Z,1520524457.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:17.371Z,1520524457.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:17.756Z,1520524457.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:17.771Z,1520524457.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:18.151Z,1520524458.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:18.198Z,1520524458.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:18.557Z,1520524458.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:18.595Z,1520524458.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:18.957Z,1520524458.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:18.973Z,1520524458.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:19.358Z,1520524459.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:19.373Z,1520524459.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:19.745Z,1520524459.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:19.771Z,1520524459.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:20.155Z,1520524460.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:20.171Z,1520524460.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:20.546Z,1520524460.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:20.578Z,1520524460.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:20.957Z,1520524460.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:20.972Z,1520524460.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:21.362Z,1520524461.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:21.387Z,1520524461.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:21.765Z,1520524461.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:21.786Z,1520524461.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:22.165Z,1520524462.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:22.181Z,1520524462.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:22.549Z,1520524462.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:22.577Z,1520524462.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:22.950Z,1520524462.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:22.991Z,1520524462.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:23.345Z,1520524463.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:23.387Z,1520524463.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:23.746Z,1520524463.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:23.761Z,1520524463.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:24.149Z,1520524464.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:24.165Z,1520524464.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:24.564Z,1520524464.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:24.595Z,1520524464.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:24.948Z,1520524464.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:24.971Z,1520524464.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:25.362Z,1520524465.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:25.396Z,1520524465.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:25.753Z,1520524465.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:25.769Z,1520524465.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:26.149Z,1520524466.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:26.198Z,1520524466.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:26.548Z,1520524466.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:26.583Z,1520524466.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:26.951Z,1520524466.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:26.966Z,1520524466.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:27.350Z,1520524467.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:27.379Z,1520524467.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:27.759Z,1520524467.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:27.789Z,1520524467.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:28.157Z,1520524468.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:28.172Z,1520524468.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:28.537Z,1520524468.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:28.573Z,1520524468.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:28.956Z,1520524468.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:28.971Z,1520524468.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:29.349Z,1520524469.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:29.380Z,1520524469.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:29.755Z,1520524469.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:29.792Z,1520524469.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:30.155Z,1520524470.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:30.176Z,1520524470.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:30.558Z,1520524470.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:30.573Z,1520524470.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:30.950Z,1520524470.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:30.982Z,1520524470.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:31.360Z,1520524471.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:31.375Z,1520524471.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:31.757Z,1520524471.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:31.773Z,1520524471.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:32.141Z,1520524472.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:32.170Z,1520524472.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:32.553Z,1520524472.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:32.573Z,1520524472.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:32.957Z,1520524472.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:32.972Z,1520524472.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:33.357Z,1520524473.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:33.383Z,1520524473.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:33.765Z,1520524473.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:33.787Z,1520524473.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:34.164Z,1520524474.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:34.180Z,1520524474.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:34.537Z,1520524474.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:34.577Z,1520524474.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:34.956Z,1520524474.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:34.972Z,1520524474.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:35.351Z,1520524475.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:35.365Z,1520524475.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:35.753Z,1520524475.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:35.773Z,1520524475.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:36.139Z,1520524476.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:36.173Z,1520524476.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:36.565Z,1520524476.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:36.580Z,1520524476.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:36.957Z,1520524476.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:36.979Z,1520524476.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:37.365Z,1520524477.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:37.386Z,1520524477.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:37.741Z,1520524477.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:37.773Z,1520524477.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:38.154Z,1520524478.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:38.171Z,1520524478.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:38.543Z,1520524478.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:38.570Z,1520524478.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:38.939Z,1520524478.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:38.980Z,1520524478.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:39.360Z,1520524479.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:39.395Z,1520524479.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:39.766Z,1520524479.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:39.786Z,1520524479.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:40.166Z,1520524480.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:40.181Z,1520524480.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:40.537Z,1520524480.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:40.570Z,1520524480.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:40.939Z,1520524480.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:40.979Z,1520524480.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:41.346Z,1520524481.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:41.373Z,1520524481.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:41.748Z,1520524481.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:41.775Z,1520524481.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:42.139Z,1520524482.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:42.180Z,1520524482.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:42.565Z,1520524482.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:42.592Z,1520524482.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:42.955Z,1520524482.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:42.978Z,1520524482.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:43.353Z,1520524483.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:43.379Z,1520524483.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:43.735Z,1520524483.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:43.775Z,1520524483.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:44.143Z,1520524484.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:44.194Z,1520524484.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:44.547Z,1520524484.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:44.574Z,1520524484.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:44.942Z,1520524484.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:44.969Z,1520524484.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:45.346Z,1520524485.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:45.379Z,1520524485.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:45.764Z,1520524485.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:45.814Z,1520524485.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:46.164Z,1520524486.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:46.180Z,1520524486.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:46.540Z,1520524486.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:46.579Z,1520524486.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:46.939Z,1520524486.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:46.975Z,1520524486.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:47.339Z,1520524487.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:47.371Z,1520524487.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:47.746Z,1520524487.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:47.773Z,1520524487.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:48.142Z,1520524488.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:48.169Z,1520524488.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:48.563Z,1520524488.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:48.585Z,1520524488.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:48.954Z,1520524488.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:48.987Z,1520524488.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:49.352Z,1520524489.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:49.383Z,1520524489.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:49.748Z,1520524489.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:49.775Z,1520524489.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:50.147Z,1520524490.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:50.176Z,1520524490.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:50.550Z,1520524490.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:50.594Z,1520524490.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:50.942Z,1520524490.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:50.980Z,1520524490.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:51.353Z,1520524491.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:51.382Z,1520524491.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:54.470Z,1520524494.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:54.485Z,1520524494.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:54.593Z,1520524494.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:54.621Z,1520524494.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:54.941Z,1520524494.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:54.986Z,1520524494.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:55.340Z,1520524495.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:55.359Z,1520524495.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:55.747Z,1520524495.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:55.762Z,1520524495.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:56.144Z,1520524496.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:56.160Z,1520524496.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:56.546Z,1520524496.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:56.586Z,1520524496.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:56.955Z,1520524496.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:56.990Z,1520524496.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:57.348Z,1520524497.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:57.377Z,1520524497.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:57.743Z,1520524497.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:57.768Z,1520524497.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:58.137Z,1520524498.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:58.170Z,1520524498.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:58.539Z,1520524498.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:58.567Z,1520524498.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:58.943Z,1520524498.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:58.969Z,1520524498.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:59.353Z,1520524499.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:59.373Z,1520524499.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:54:59.754Z,1520524499.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:54:59.777Z,1520524499.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:00.165Z,1520524500.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:00.187Z,1520524500.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:00.532Z,1520524500.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:00.573Z,1520524500.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:00.940Z,1520524500.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:00.972Z,1520524500.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:01.339Z,1520524501.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:01.382Z,1520524501.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:01.741Z,1520524501.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:01.778Z,1520524501.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:02.143Z,1520524502.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:02.179Z,1520524502.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:02.553Z,1520524502.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:02.580Z,1520524502.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:02.947Z,1520524502.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:02.982Z,1520524502.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:03.353Z,1520524503.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:03.398Z,1520524503.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:03.733Z,1520524503.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:03.753Z,1520524503.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:04.143Z,1520524504.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:04.159Z,1520524504.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:04.542Z,1520524504.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:04.582Z,1520524504.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:04.941Z,1520524504.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:04.981Z,1520524504.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:05.352Z,1520524505.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:05.385Z,1520524505.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:05.749Z,1520524505.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:05.783Z,1520524505.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:06.153Z,1520524506.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:06.187Z,1520524506.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:06.530Z,1520524506.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:06.562Z,1520524506.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:06.939Z,1520524506.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:06.957Z,1520524506.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:07.343Z,1520524507.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:07.358Z,1520524507.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:07.741Z,1520524507.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:07.786Z,1520524507.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:08.141Z,1520524508.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:08.160Z,1520524508.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:08.556Z,1520524508.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:08.591Z,1520524508.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:08.945Z,1520524508.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:08.960Z,1520524508.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:09.342Z,1520524509.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:09.382Z,1520524509.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:09.736Z,1520524509.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:09.757Z,1520524509.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:10.136Z,1520524510.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:10.155Z,1520524510.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:10.545Z,1520524510.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:10.561Z,1520524510.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:10.936Z,1520524510.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:10.967Z,1520524510.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:11.346Z,1520524511.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:11.366Z,1520524511.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:11.752Z,1520524511.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:11.786Z,1520524511.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:12.149Z,1520524512.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:12.189Z,1520524512.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:12.537Z,1520524512.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:12.584Z,1520524512.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:12.939Z,1520524512.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:12.959Z,1520524512.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:13.346Z,1520524513.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:13.361Z,1520524513.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:13.747Z,1520524513.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:13.763Z,1520524513.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:14.148Z,1520524514.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:14.192Z,1520524514.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:14.552Z,1520524514.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:14.589Z,1520524514.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:14.951Z,1520524514.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:14.971Z,1520524514.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:15.354Z,1520524515.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:15.369Z,1520524515.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:15.736Z,1520524515.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:15.767Z,1520524515.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:16.134Z,1520524516.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:16.160Z,1520524516.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:16.548Z,1520524516.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:16.564Z,1520524516.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:16.941Z,1520524516.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:16.956Z,1520524516.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:17.349Z,1520524517.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:17.394Z,1520524517.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:17.750Z,1520524517.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:17.794Z,1520524517.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:18.152Z,1520524518.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:18.166Z,1520524518.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:18.548Z,1520524518.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:18.563Z,1520524518.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:18.943Z,1520524518.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:18.975Z,1520524518.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:19.345Z,1520524519.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:19.365Z,1520524519.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:19.748Z,1520524519.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:19.763Z,1520524519.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:20.143Z,1520524520.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:20.171Z,1520524520.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:20.555Z,1520524520.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:20.574Z,1520524520.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:20.956Z,1520524520.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:20.971Z,1520524520.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:21.357Z,1520524521.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:21.374Z,1520524521.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:21.748Z,1520524521.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:21.763Z,1520524521.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:22.142Z,1520524522.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:22.175Z,1520524522.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:22.540Z,1520524522.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:22.560Z,1520524522.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:22.950Z,1520524522.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:22.964Z,1520524522.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:23.356Z,1520524523.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:23.372Z,1520524523.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:23.753Z,1520524523.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:23.773Z,1520524523.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:24.158Z,1520524524.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:24.173Z,1520524524.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:24.547Z,1520524524.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:24.563Z,1520524524.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:24.948Z,1520524524.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:24.963Z,1520524524.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:25.327Z,1520524525.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:25.367Z,1520524525.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:25.746Z,1520524525.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:25.765Z,1520524525.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:26.142Z,1520524526.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:26.162Z,1520524526.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:26.556Z,1520524526.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:26.571Z,1520524526.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:26.959Z,1520524526.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:26.977Z,1520524526.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:27.357Z,1520524527.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:27.372Z,1520524527.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:27.749Z,1520524527.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:27.764Z,1520524527.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:28.145Z,1520524528.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:28.160Z,1520524528.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:28.530Z,1520524528.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:28.575Z,1520524528.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:28.947Z,1520524528.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:28.965Z,1520524528.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:29.359Z,1520524529.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:29.374Z,1520524529.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:29.756Z,1520524529.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:29.771Z,1520524529.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:30.150Z,1520524530.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:30.179Z,1520524530.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:30.532Z,1520524530.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:30.592Z,1520524530.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:30.947Z,1520524530.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:30.967Z,1520524530.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:31.347Z,1520524531.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:31.362Z,1520524531.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:31.746Z,1520524531.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:31.794Z,1520524531.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:32.130Z,1520524532.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:32.164Z,1520524532.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:32.560Z,1520524532.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:32.575Z,1520524532.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:32.956Z,1520524532.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:32.971Z,1520524532.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:33.354Z,1520524533.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:33.373Z,1520524533.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:33.747Z,1520524533.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:33.765Z,1520524533.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:34.147Z,1520524534.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:34.163Z,1520524534.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:34.551Z,1520524534.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:34.575Z,1520524534.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:34.931Z,1520524534.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:34.969Z,1520524534.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:35.356Z,1520524535.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:35.371Z,1520524535.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:35.761Z,1520524535.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:35.777Z,1520524535.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:36.156Z,1520524536.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:36.171Z,1520524536.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:36.545Z,1520524536.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:36.594Z,1520524536.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:36.943Z,1520524536.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:36.964Z,1520524536.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:37.327Z,1520524537.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:37.366Z,1520524537.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:37.747Z,1520524537.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:37.763Z,1520524537.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:38.130Z,1520524538.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:38.171Z,1520524538.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:38.563Z,1520524538.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:38.578Z,1520524538.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:38.962Z,1520524538.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:38.977Z,1520524538.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:39.356Z,1520524539.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:39.399Z,1520524539.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:39.731Z,1520524539.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:39.771Z,1520524539.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:40.146Z,1520524540.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:40.165Z,1520524540.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:40.532Z,1520524540.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:40.570Z,1520524540.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:40.949Z,1520524540.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:40.964Z,1520524540.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:41.352Z,1520524541.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:41.395Z,1520524541.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:41.755Z,1520524541.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:41.793Z,1520524541.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:42.161Z,1520524542.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:42.176Z,1520524542.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:42.534Z,1520524542.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:42.571Z,1520524542.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:42.935Z,1520524542.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:42.982Z,1520524542.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:43.335Z,1520524543.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:43.379Z,1520524543.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:43.749Z,1520524543.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:43.765Z,1520524543.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:44.152Z,1520524544.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:44.168Z,1520524544.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:44.557Z,1520524544.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:44.576Z,1520524544.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:44.954Z,1520524544.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:44.974Z,1520524544.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:45.352Z,1520524545.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:45.384Z,1520524545.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:45.739Z,1520524545.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:45.766Z,1520524545.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:46.136Z,1520524546.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:46.183Z,1520524546.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:46.537Z,1520524546.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:46.586Z,1520524546.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:46.937Z,1520524546.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:46.968Z,1520524546.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:47.345Z,1520524547.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:47.371Z,1520524547.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:47.752Z,1520524547.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:47.778Z,1520524547.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:48.162Z,1520524548.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:48.177Z,1520524548.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:48.528Z,1520524548.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:48.565Z,1520524548.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:48.957Z,1520524548.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:48.990Z,1520524548.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:49.335Z,1520524549.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:49.375Z,1520524549.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:49.729Z,1520524549.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:49.767Z,1520524549.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:50.136Z,1520524550.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:50.167Z,1520524550.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:50.170Z,1520524550.170 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T15:55:50.170Z,1520524550.170 [Default:CheckIn:C.Wait] Stopped
2018-03-08T15:55:50.170Z,1520524550.170 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T15:55:50.170Z,1520524550.170 [Default:CheckIn:D] Running Loop=1
2018-03-08T15:55:50.553Z,1520524550.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:50.575Z,1520524550.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:50.578Z,1520524550.578 [Default:CheckIn:D] Stopped
2018-03-08T15:55:50.578Z,1520524550.578 [Default:CheckIn:E] Running Loop=1
2018-03-08T15:55:50.942Z,1520524550.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:50.983Z,1520524550.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:50.987Z,1520524550.987 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 490.096224 min 
2018-03-08T15:55:50.987Z,1520524550.987 [Default:CheckIn:E] Stopped
2018-03-08T15:55:50.987Z,1520524550.987 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T15:55:50.987Z,1520524550.987 [Default:CheckIn] Stopped
2018-03-08T15:55:50.987Z,1520524550.987 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T15:55:50.987Z,1520524550.987 [Default:CheckIn](INFO): Running loop #48
2018-03-08T15:55:50.987Z,1520524550.987 [Default:CheckIn] Running Loop=48
2018-03-08T15:55:50.987Z,1520524550.987 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T15:55:50.988Z,1520524550.988 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T15:55:51.342Z,1520524551.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:51.375Z,1520524551.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:51.731Z,1520524551.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:51.763Z,1520524551.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:54.850Z,1520524554.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:54.882Z,1520524554.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:54.986Z,1520524554.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:55.018Z,1520524555.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:55.378Z,1520524555.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:55.393Z,1520524555.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:55.777Z,1520524555.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:55.795Z,1520524555.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:56.174Z,1520524556.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:56.198Z,1520524556.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:56.570Z,1520524556.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:56.585Z,1520524556.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:56.961Z,1520524556.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:56.982Z,1520524556.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:57.379Z,1520524557.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:57.402Z,1520524557.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:57.769Z,1520524557.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:57.784Z,1520524557.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:58.165Z,1520524558.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:58.187Z,1520524558.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:58.577Z,1520524558.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:58.592Z,1520524558.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:58.982Z,1520524558.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:58.998Z,1520524558.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:59.370Z,1520524559.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:59.397Z,1520524559.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:55:59.771Z,1520524559.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:55:59.786Z,1520524559.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:00.168Z,1520524560.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:00.227Z,1520524560.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:00.572Z,1520524560.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:00.588Z,1520524560.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:00.975Z,1520524560.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:00.990Z,1520524560.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:01.381Z,1520524561.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:01.396Z,1520524561.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:01.774Z,1520524561.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:01.790Z,1520524561.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:02.181Z,1520524562.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:02.196Z,1520524562.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:02.572Z,1520524562.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:02.586Z,1520524562.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:02.965Z,1520524562.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:02.995Z,1520524562.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:03.358Z,1520524563.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:03.385Z,1520524563.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:03.775Z,1520524563.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:03.790Z,1520524563.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:04.171Z,1520524564.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:04.187Z,1520524564.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:04.581Z,1520524564.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:04.602Z,1520524564.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:04.982Z,1520524564.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:05.002Z,1520524565.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:05.370Z,1520524565.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:05.392Z,1520524565.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:05.771Z,1520524565.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:05.786Z,1520524565.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:06.158Z,1520524566.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:06.199Z,1520524566.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:06.559Z,1520524566.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:06.588Z,1520524566.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:06.973Z,1520524566.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:06.988Z,1520524566.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:07.375Z,1520524567.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:07.394Z,1520524567.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:07.776Z,1520524567.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:07.798Z,1520524567.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:08.178Z,1520524568.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:08.193Z,1520524568.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:08.573Z,1520524568.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:08.588Z,1520524568.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:08.951Z,1520524568.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:08.980Z,1520524568.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:09.361Z,1520524569.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:09.388Z,1520524569.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:09.763Z,1520524569.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:09.790Z,1520524569.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:10.160Z,1520524570.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:10.189Z,1520524570.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:10.586Z,1520524570.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:10.601Z,1520524570.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:10.986Z,1520524570.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:11.006Z,1520524571.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:11.374Z,1520524571.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:11.394Z,1520524571.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:11.774Z,1520524571.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:11.790Z,1520524571.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:12.155Z,1520524572.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:12.191Z,1520524572.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:12.561Z,1520524572.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:12.598Z,1520524572.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:12.962Z,1520524572.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:12.989Z,1520524572.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:13.373Z,1520524573.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:13.395Z,1520524573.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:13.773Z,1520524573.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:13.793Z,1520524573.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:14.182Z,1520524574.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:14.202Z,1520524574.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:14.559Z,1520524574.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:14.586Z,1520524574.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:14.949Z,1520524574.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:14.987Z,1520524574.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:15.375Z,1520524575.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:15.406Z,1520524575.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:15.761Z,1520524575.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:15.789Z,1520524575.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:16.158Z,1520524576.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:16.187Z,1520524576.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:16.584Z,1520524576.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:16.606Z,1520524576.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:16.982Z,1520524576.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:17.002Z,1520524577.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:17.361Z,1520524577.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:17.400Z,1520524577.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:17.758Z,1520524577.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:17.786Z,1520524577.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:18.175Z,1520524578.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:18.204Z,1520524578.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:18.558Z,1520524578.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:18.586Z,1520524578.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:18.964Z,1520524578.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:18.996Z,1520524578.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:19.378Z,1520524579.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:19.393Z,1520524579.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:19.778Z,1520524579.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:19.794Z,1520524579.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:20.180Z,1520524580.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:20.202Z,1520524580.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:20.561Z,1520524580.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:20.589Z,1520524580.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:20.954Z,1520524580.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:20.978Z,1520524580.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:21.365Z,1520524581.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:21.398Z,1520524581.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:21.755Z,1520524581.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:21.792Z,1520524581.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:22.161Z,1520524582.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:22.190Z,1520524582.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:22.582Z,1520524582.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:22.597Z,1520524582.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:22.988Z,1520524582.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:23.010Z,1520524583.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:23.363Z,1520524583.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:23.399Z,1520524583.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:23.761Z,1520524583.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:23.797Z,1520524583.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:24.159Z,1520524584.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:24.173Z,1520524584.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:24.565Z,1520524584.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:24.580Z,1520524584.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:24.966Z,1520524584.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:25.003Z,1520524585.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:25.377Z,1520524585.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:25.408Z,1520524585.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:25.774Z,1520524585.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:25.801Z,1520524585.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:26.178Z,1520524586.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:26.210Z,1520524586.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:26.570Z,1520524586.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:26.585Z,1520524586.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:26.964Z,1520524586.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:26.983Z,1520524586.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:27.365Z,1520524587.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:27.381Z,1520524587.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:27.768Z,1520524587.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:27.784Z,1520524587.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:28.169Z,1520524588.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:28.185Z,1520524588.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:28.581Z,1520524588.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:28.611Z,1520524588.611 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:28.611Z,1520524588.611 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 164
2018-03-08T15:56:28.611Z,1520524588.611 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T15:56:28.613Z,1520524588.613 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:28.613Z,1520524588.613 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 164
2018-03-08T15:56:28.613Z,1520524588.613 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T15:56:28.615Z,1520524588.615 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:28.615Z,1520524588.615 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 164
2018-03-08T15:56:28.615Z,1520524588.615 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T15:56:28.627Z,1520524588.627 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T15:56:28.627Z,1520524588.627 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T15:56:28.627Z,1520524588.627 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T15:56:28.981Z,1520524588.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:29.021Z,1520524589.021 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T15:56:29.021Z,1520524589.021 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 164
2018-03-08T15:56:29.022Z,1520524589.022 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T15:56:29.022Z,1520524589.022 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 164
2018-03-08T15:56:29.022Z,1520524589.022 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T15:56:29.022Z,1520524589.022 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 164
2018-03-08T15:56:29.371Z,1520524589.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:29.386Z,1520524589.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T15:56:29.386Z,1520524589.386 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:56:29.386Z,1520524589.386 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:56:29.387Z,1520524589.387 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T15:56:29.387Z,1520524589.387 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:56:29.388Z,1520524589.388 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:56:29.388Z,1520524589.388 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T15:56:29.388Z,1520524589.388 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:56:29.389Z,1520524589.389 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:56:29.775Z,1520524589.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:29.790Z,1520524589.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T15:56:29.791Z,1520524589.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:30.170Z,1520524590.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:30.209Z,1520524590.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T15:56:30.210Z,1520524590.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:30.570Z,1520524590.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:30.585Z,1520524590.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T15:56:30.586Z,1520524590.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:30.975Z,1520524590.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:30.994Z,1520524590.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T15:56:30.995Z,1520524590.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:31.376Z,1520524591.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:31.391Z,1520524591.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T15:56:31.392Z,1520524591.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:31.769Z,1520524591.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:31.791Z,1520524591.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T15:56:31.792Z,1520524591.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:32.172Z,1520524592.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:32.188Z,1520524592.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T15:56:32.189Z,1520524592.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:32.576Z,1520524592.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:32.591Z,1520524592.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T15:56:32.592Z,1520524592.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:32.963Z,1520524592.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:32.978Z,1520524592.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T15:56:32.979Z,1520524592.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:33.370Z,1520524593.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:33.384Z,1520524593.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T15:56:33.386Z,1520524593.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:33.769Z,1520524593.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:33.783Z,1520524593.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T15:56:33.784Z,1520524593.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:34.171Z,1520524594.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:34.190Z,1520524594.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T15:56:34.191Z,1520524594.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:34.575Z,1520524594.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:34.590Z,1520524594.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T15:56:34.591Z,1520524594.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:34.973Z,1520524594.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:34.988Z,1520524594.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T15:56:34.989Z,1520524594.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:35.370Z,1520524595.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:35.394Z,1520524595.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T15:56:35.395Z,1520524595.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:35.771Z,1520524595.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:35.790Z,1520524595.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T15:56:35.790Z,1520524595.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:36.171Z,1520524596.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:36.217Z,1520524596.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T15:56:36.218Z,1520524596.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:36.570Z,1520524596.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:36.585Z,1520524596.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T15:56:36.586Z,1520524596.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:36.967Z,1520524596.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:36.982Z,1520524596.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T15:56:36.983Z,1520524596.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:37.383Z,1520524597.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:37.398Z,1520524597.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T15:56:37.398Z,1520524597.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:37.770Z,1520524597.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:37.801Z,1520524597.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T15:56:37.802Z,1520524597.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:38.182Z,1520524598.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:38.202Z,1520524598.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T15:56:38.203Z,1520524598.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:38.559Z,1520524598.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:38.585Z,1520524598.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T15:56:38.586Z,1520524598.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:38.953Z,1520524598.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:38.987Z,1520524598.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T15:56:38.988Z,1520524598.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:39.361Z,1520524599.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:39.388Z,1520524599.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T15:56:39.389Z,1520524599.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:39.763Z,1520524599.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:39.790Z,1520524599.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T15:56:39.791Z,1520524599.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:40.155Z,1520524600.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:40.178Z,1520524600.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T15:56:40.179Z,1520524600.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:40.580Z,1520524600.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:40.595Z,1520524600.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T15:56:40.596Z,1520524600.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:40.985Z,1520524600.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:41.006Z,1520524601.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T15:56:41.007Z,1520524601.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:41.361Z,1520524601.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:41.388Z,1520524601.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T15:56:41.389Z,1520524601.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:41.762Z,1520524601.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:41.789Z,1520524601.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T15:56:41.790Z,1520524601.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:42.166Z,1520524602.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:42.211Z,1520524602.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T15:56:42.212Z,1520524602.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:42.562Z,1520524602.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:42.589Z,1520524602.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T15:56:42.590Z,1520524602.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:42.962Z,1520524602.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:42.989Z,1520524602.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T15:56:42.990Z,1520524602.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:43.383Z,1520524603.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:43.402Z,1520524603.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T15:56:43.403Z,1520524603.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:43.767Z,1520524603.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:43.802Z,1520524603.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T15:56:43.803Z,1520524603.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:44.178Z,1520524604.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:44.202Z,1520524604.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T15:56:44.203Z,1520524604.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:44.563Z,1520524604.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:44.591Z,1520524604.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T15:56:44.592Z,1520524604.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:44.954Z,1520524604.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:44.986Z,1520524604.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T15:56:44.987Z,1520524604.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:45.360Z,1520524605.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:45.395Z,1520524605.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T15:56:45.396Z,1520524605.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:45.767Z,1520524605.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:45.798Z,1520524605.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T15:56:45.799Z,1520524605.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:46.163Z,1520524606.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:46.195Z,1520524606.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T15:56:46.196Z,1520524606.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:46.582Z,1520524606.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:46.602Z,1520524606.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T15:56:46.603Z,1520524606.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:46.988Z,1520524606.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:47.003Z,1520524607.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T15:56:47.004Z,1520524607.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:47.367Z,1520524607.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:47.402Z,1520524607.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T15:56:47.403Z,1520524607.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:47.761Z,1520524607.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:47.776Z,1520524607.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T15:56:47.793Z,1520524607.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:48.162Z,1520524608.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:48.179Z,1520524608.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T15:56:48.190Z,1520524608.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:48.562Z,1520524608.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:48.578Z,1520524608.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T15:56:48.579Z,1520524608.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:48.969Z,1520524608.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:48.985Z,1520524608.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:49.377Z,1520524609.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:49.408Z,1520524609.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:49.776Z,1520524609.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:49.807Z,1520524609.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:50.178Z,1520524610.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:50.210Z,1520524610.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:50.568Z,1520524610.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:50.583Z,1520524610.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:50.966Z,1520524610.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:50.981Z,1520524610.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:51.358Z,1520524611.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:51.378Z,1520524611.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:51.778Z,1520524611.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:51.793Z,1520524611.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:54.882Z,1520524614.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:54.897Z,1520524614.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:55.011Z,1520524615.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:55.035Z,1520524615.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:55.361Z,1520524615.361 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-03-08T15:56:55.361Z,1520524615.361 [DropWeight] Hardware Fault, FailCount= 1
2018-03-08T15:56:55.361Z,1520524615.361 [DropWeight](ERROR): Hardware Fault
2018-03-08T15:56:55.393Z,1520524615.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:55.421Z,1520524615.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:55.436Z,1520524615.436 [CBIT](INFO): Critical error at 20180308T155655
2018-03-08T15:56:55.443Z,1520524615.443 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-03-08T15:56:55.443Z,1520524615.443 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-03-08T15:56:55.781Z,1520524615.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:55.802Z,1520524615.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:55.834Z,1520524615.834 [CBIT](INFO): Critical error at 20180308T155655
2018-03-08T15:56:56.177Z,1520524616.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:56.193Z,1520524616.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:56.584Z,1520524616.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:56.607Z,1520524616.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:56.978Z,1520524616.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:56.994Z,1520524616.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:57.385Z,1520524617.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:57.406Z,1520524617.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:57.784Z,1520524617.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:57.807Z,1520524617.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:58.187Z,1520524618.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:58.203Z,1520524618.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:58.582Z,1520524618.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:58.597Z,1520524618.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:58.975Z,1520524618.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:58.991Z,1520524618.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:59.373Z,1520524619.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:59.389Z,1520524619.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:56:59.769Z,1520524619.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:56:59.794Z,1520524619.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:00.181Z,1520524620.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:00.200Z,1520524620.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:00.588Z,1520524620.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:00.610Z,1520524620.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:00.986Z,1520524620.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:01.006Z,1520524621.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:01.387Z,1520524621.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:01.402Z,1520524621.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:01.775Z,1520524621.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:01.791Z,1520524621.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:02.173Z,1520524622.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:02.194Z,1520524622.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:02.574Z,1520524622.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:02.589Z,1520524622.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:02.974Z,1520524622.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:02.990Z,1520524622.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:03.388Z,1520524623.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:03.405Z,1520524623.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:03.787Z,1520524623.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:03.802Z,1520524623.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:04.186Z,1520524624.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:04.202Z,1520524624.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:04.577Z,1520524624.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:04.593Z,1520524624.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:04.961Z,1520524624.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:04.995Z,1520524624.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:05.375Z,1520524625.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:05.392Z,1520524625.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:05.763Z,1520524625.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:05.799Z,1520524625.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:06.168Z,1520524626.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:06.270Z,1520524626.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:06.590Z,1520524626.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:06.605Z,1520524626.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:06.990Z,1520524626.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:07.005Z,1520524627.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:07.373Z,1520524627.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:07.400Z,1520524627.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:07.770Z,1520524627.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:07.797Z,1520524627.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:08.167Z,1520524628.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:08.207Z,1520524628.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:08.567Z,1520524628.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:08.605Z,1520524628.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:08.964Z,1520524628.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:08.980Z,1520524628.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:09.382Z,1520524629.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:09.414Z,1520524629.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:09.792Z,1520524629.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:09.807Z,1520524629.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:10.182Z,1520524630.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:10.209Z,1520524630.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:10.564Z,1520524630.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:10.579Z,1520524630.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:10.966Z,1520524630.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:10.981Z,1520524630.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:11.371Z,1520524631.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:11.387Z,1520524631.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:11.771Z,1520524631.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:11.786Z,1520524631.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:12.167Z,1520524632.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:12.182Z,1520524632.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:12.584Z,1520524632.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:12.615Z,1520524632.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:12.989Z,1520524632.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:13.020Z,1520524633.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:13.373Z,1520524633.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:13.394Z,1520524633.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:13.773Z,1520524633.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:13.788Z,1520524633.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:14.174Z,1520524634.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:14.189Z,1520524634.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:14.575Z,1520524634.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:14.590Z,1520524634.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:14.972Z,1520524634.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:14.988Z,1520524634.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:15.385Z,1520524635.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:15.418Z,1520524635.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:15.785Z,1520524635.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:15.821Z,1520524635.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:16.176Z,1520524636.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:16.191Z,1520524636.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:16.572Z,1520524636.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:16.587Z,1520524636.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:16.971Z,1520524636.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:16.986Z,1520524636.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:17.375Z,1520524637.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:17.391Z,1520524637.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:17.776Z,1520524637.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:17.792Z,1520524637.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:18.171Z,1520524638.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:18.186Z,1520524638.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:18.585Z,1520524638.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:18.616Z,1520524638.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:18.981Z,1520524638.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:18.997Z,1520524638.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:19.381Z,1520524639.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:19.402Z,1520524639.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:19.773Z,1520524639.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:19.794Z,1520524639.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:20.174Z,1520524640.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:20.194Z,1520524640.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:20.579Z,1520524640.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:20.594Z,1520524640.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:20.977Z,1520524640.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:20.992Z,1520524640.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:21.377Z,1520524641.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:21.393Z,1520524641.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:21.777Z,1520524641.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:21.791Z,1520524641.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:22.182Z,1520524642.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:22.202Z,1520524642.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:22.578Z,1520524642.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:22.593Z,1520524642.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:22.974Z,1520524642.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:22.989Z,1520524642.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:23.374Z,1520524643.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:23.389Z,1520524643.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:23.780Z,1520524643.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:23.795Z,1520524643.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:24.177Z,1520524644.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:24.192Z,1520524644.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:24.582Z,1520524644.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:24.602Z,1520524644.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:24.980Z,1520524644.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:25.002Z,1520524645.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:25.384Z,1520524645.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:25.399Z,1520524645.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:25.777Z,1520524645.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:25.794Z,1520524645.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:26.179Z,1520524646.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:26.198Z,1520524646.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:26.564Z,1520524646.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:26.608Z,1520524646.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:26.979Z,1520524646.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:26.999Z,1520524646.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:27.385Z,1520524647.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:27.406Z,1520524647.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:27.783Z,1520524647.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:27.798Z,1520524647.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:28.186Z,1520524648.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:28.201Z,1520524648.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:28.578Z,1520524648.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:28.598Z,1520524648.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:28.974Z,1520524648.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:28.989Z,1520524648.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:29.374Z,1520524649.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:29.394Z,1520524649.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:29.775Z,1520524649.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:29.791Z,1520524649.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:30.175Z,1520524650.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:30.190Z,1520524650.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:30.585Z,1520524650.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:30.607Z,1520524650.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:30.985Z,1520524650.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:31.000Z,1520524651.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:31.383Z,1520524651.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:31.399Z,1520524651.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:31.776Z,1520524651.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:31.791Z,1520524651.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:32.183Z,1520524652.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:32.198Z,1520524652.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:32.575Z,1520524652.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:32.590Z,1520524652.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:32.980Z,1520524652.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:32.995Z,1520524652.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:33.386Z,1520524653.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:33.406Z,1520524653.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:33.785Z,1520524653.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:33.799Z,1520524653.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:34.187Z,1520524654.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:34.202Z,1520524654.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:34.574Z,1520524654.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:34.595Z,1520524654.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:34.978Z,1520524654.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:34.993Z,1520524654.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:35.372Z,1520524655.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:35.388Z,1520524655.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:35.779Z,1520524655.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:35.795Z,1520524655.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:36.176Z,1520524656.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:36.192Z,1520524656.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:36.580Z,1520524656.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:36.604Z,1520524656.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:36.989Z,1520524656.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:37.004Z,1520524657.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:37.386Z,1520524657.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:37.401Z,1520524657.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:37.758Z,1520524657.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:37.789Z,1520524657.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:38.186Z,1520524658.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:38.221Z,1520524658.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:38.572Z,1520524658.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:38.601Z,1520524658.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:38.966Z,1520524658.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:38.989Z,1520524658.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:39.377Z,1520524659.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:39.402Z,1520524659.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:39.781Z,1520524659.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:39.804Z,1520524659.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:40.193Z,1520524660.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:40.209Z,1520524660.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:40.574Z,1520524660.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:40.604Z,1520524660.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:40.964Z,1520524660.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:40.979Z,1520524660.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:41.363Z,1520524661.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:41.379Z,1520524661.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:41.765Z,1520524661.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:41.786Z,1520524661.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:42.166Z,1520524662.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:42.181Z,1520524662.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:42.577Z,1520524662.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:42.605Z,1520524662.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:42.989Z,1520524662.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:43.015Z,1520524663.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:43.385Z,1520524663.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:43.412Z,1520524663.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:43.770Z,1520524663.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:43.785Z,1520524663.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:44.169Z,1520524664.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:44.218Z,1520524664.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:44.571Z,1520524664.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:44.585Z,1520524664.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:44.968Z,1520524664.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:44.992Z,1520524664.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:45.378Z,1520524665.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:45.393Z,1520524665.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:45.782Z,1520524665.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:45.800Z,1520524665.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:46.182Z,1520524666.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:46.198Z,1520524666.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:46.576Z,1520524666.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:46.592Z,1520524666.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:46.976Z,1520524666.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:46.991Z,1520524666.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:47.366Z,1520524667.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:47.381Z,1520524667.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:47.778Z,1520524667.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:47.799Z,1520524667.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:48.176Z,1520524668.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:48.191Z,1520524668.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:48.577Z,1520524668.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:48.593Z,1520524668.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:49.013Z,1520524669.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:49.046Z,1520524669.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:49.376Z,1520524669.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:49.421Z,1520524669.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:49.775Z,1520524669.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:49.791Z,1520524669.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:50.182Z,1520524670.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:50.211Z,1520524670.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:50.567Z,1520524670.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:50.594Z,1520524670.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:50.957Z,1520524670.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:50.988Z,1520524670.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:51.386Z,1520524671.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:51.401Z,1520524671.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:51.793Z,1520524671.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:51.807Z,1520524671.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:54.880Z,1520524674.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:54.895Z,1520524674.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:54.986Z,1520524674.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:55.019Z,1520524675.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:55.355Z,1520524675.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:55.387Z,1520524675.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:55.758Z,1520524675.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:55.776Z,1520524675.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:56.152Z,1520524676.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:56.169Z,1520524676.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:56.565Z,1520524676.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:56.601Z,1520524676.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:56.973Z,1520524676.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:56.994Z,1520524676.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:57.359Z,1520524677.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:57.377Z,1520524677.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:57.757Z,1520524677.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:57.778Z,1520524677.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:58.161Z,1520524678.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:58.175Z,1520524678.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:58.559Z,1520524678.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:58.578Z,1520524678.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:58.955Z,1520524678.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:58.975Z,1520524678.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:59.358Z,1520524679.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:59.373Z,1520524679.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:57:59.762Z,1520524679.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:57:59.777Z,1520524679.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:00.170Z,1520524680.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:00.206Z,1520524680.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:00.551Z,1520524680.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:00.579Z,1520524680.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:00.957Z,1520524680.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:00.995Z,1520524680.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:01.358Z,1520524681.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:01.377Z,1520524681.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:01.758Z,1520524681.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:01.773Z,1520524681.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:02.154Z,1520524682.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:02.174Z,1520524682.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:02.559Z,1520524682.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:02.574Z,1520524682.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:02.962Z,1520524682.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:02.977Z,1520524682.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:03.361Z,1520524683.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:03.377Z,1520524683.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:03.754Z,1520524683.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:03.774Z,1520524683.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:04.155Z,1520524684.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:04.170Z,1520524684.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:04.561Z,1520524684.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:04.577Z,1520524684.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:04.958Z,1520524684.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:04.974Z,1520524684.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:05.359Z,1520524685.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:05.377Z,1520524685.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:05.760Z,1520524685.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:05.782Z,1520524685.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:06.165Z,1520524686.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:06.189Z,1520524686.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:06.556Z,1520524686.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:06.571Z,1520524686.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:06.953Z,1520524686.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:06.998Z,1520524686.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:07.355Z,1520524687.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:07.398Z,1520524687.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:07.758Z,1520524687.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:07.790Z,1520524687.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:08.158Z,1520524688.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:08.173Z,1520524688.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:08.534Z,1520524688.534 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T15:58:08.534Z,1520524688.534 [NAL9602] Data Fault, FailCount= 1
2018-03-08T15:58:08.534Z,1520524688.534 [NAL9602](ERROR): Data Fault
2018-03-08T15:58:08.573Z,1520524688.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:08.598Z,1520524688.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:08.625Z,1520524688.625 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T15:58:08.942Z,1520524688.942 [NAL9602](INFO): Powering down
2018-03-08T15:58:08.962Z,1520524688.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:08.990Z,1520524688.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:09.354Z,1520524689.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:09.389Z,1520524689.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:09.763Z,1520524689.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:09.794Z,1520524689.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:09.807Z,1520524689.807 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T15:58:09.807Z,1520524689.807 [NAL9602] No Fault, FailCount= 1
2018-03-08T15:58:10.150Z,1520524690.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:10.189Z,1520524690.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:10.545Z,1520524690.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:10.602Z,1520524690.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:10.951Z,1520524690.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:10.970Z,1520524690.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:11.354Z,1520524691.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:11.369Z,1520524691.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:11.742Z,1520524691.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:11.775Z,1520524691.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:12.150Z,1520524692.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:12.168Z,1520524692.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:12.551Z,1520524692.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:12.567Z,1520524692.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:12.943Z,1520524692.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:12.971Z,1520524692.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:13.353Z,1520524693.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:13.402Z,1520524693.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:13.748Z,1520524693.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:13.767Z,1520524693.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:14.155Z,1520524694.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:14.171Z,1520524694.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:14.553Z,1520524694.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:14.574Z,1520524694.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:14.952Z,1520524694.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:14.980Z,1520524694.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:15.345Z,1520524695.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:15.396Z,1520524695.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:15.749Z,1520524695.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:15.771Z,1520524695.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:16.155Z,1520524696.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:16.170Z,1520524696.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:16.545Z,1520524696.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:16.578Z,1520524696.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:16.954Z,1520524696.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:16.974Z,1520524696.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:17.356Z,1520524697.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:17.371Z,1520524697.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:17.752Z,1520524697.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:17.768Z,1520524697.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:18.153Z,1520524698.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:18.198Z,1520524698.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:18.553Z,1520524698.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:18.579Z,1520524698.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:18.953Z,1520524698.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:18.968Z,1520524698.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:19.357Z,1520524699.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:19.372Z,1520524699.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:19.753Z,1520524699.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:19.796Z,1520524699.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:20.152Z,1520524700.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:20.191Z,1520524700.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:20.551Z,1520524700.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:20.579Z,1520524700.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:20.958Z,1520524700.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:20.972Z,1520524700.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:21.348Z,1520524701.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:21.382Z,1520524701.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:21.758Z,1520524701.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:21.796Z,1520524701.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:22.161Z,1520524702.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:22.175Z,1520524702.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:22.548Z,1520524702.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:22.563Z,1520524702.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:22.944Z,1520524702.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:22.977Z,1520524702.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:23.356Z,1520524703.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:23.371Z,1520524703.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:23.751Z,1520524703.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:23.775Z,1520524703.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:24.152Z,1520524704.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:24.174Z,1520524704.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:24.551Z,1520524704.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:24.579Z,1520524704.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:24.944Z,1520524704.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:24.983Z,1520524704.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:25.352Z,1520524705.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:25.375Z,1520524705.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:25.756Z,1520524705.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:25.771Z,1520524705.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:26.155Z,1520524706.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:26.176Z,1520524706.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:26.559Z,1520524706.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:26.574Z,1520524706.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:26.959Z,1520524706.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:26.973Z,1520524706.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:27.339Z,1520524707.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:27.374Z,1520524707.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:27.755Z,1520524707.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:27.775Z,1520524707.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:28.159Z,1520524708.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:28.174Z,1520524708.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:28.537Z,1520524708.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:28.576Z,1520524708.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:28.961Z,1520524708.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:28.982Z,1520524708.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:29.354Z,1520524709.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:29.374Z,1520524709.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:29.740Z,1520524709.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:29.775Z,1520524709.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:30.147Z,1520524710.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:30.174Z,1520524710.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:30.542Z,1520524710.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:30.576Z,1520524710.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:30.940Z,1520524710.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:30.974Z,1520524710.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:31.342Z,1520524711.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:31.375Z,1520524711.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:31.749Z,1520524711.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:31.775Z,1520524711.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:32.149Z,1520524712.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:32.176Z,1520524712.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:32.542Z,1520524712.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:32.579Z,1520524712.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:32.943Z,1520524712.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:32.978Z,1520524712.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:33.342Z,1520524713.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:33.379Z,1520524713.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:33.747Z,1520524713.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:33.774Z,1520524713.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:34.139Z,1520524714.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:34.178Z,1520524714.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:34.536Z,1520524714.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:34.563Z,1520524714.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:34.949Z,1520524714.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:34.976Z,1520524714.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:35.346Z,1520524715.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:35.378Z,1520524715.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:35.740Z,1520524715.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:35.786Z,1520524715.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:36.148Z,1520524716.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:36.178Z,1520524716.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:36.549Z,1520524716.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:36.575Z,1520524716.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:36.939Z,1520524716.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:36.955Z,1520524716.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:37.342Z,1520524717.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:37.386Z,1520524717.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:37.748Z,1520524717.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:37.782Z,1520524717.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:38.142Z,1520524718.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:38.159Z,1520524718.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:38.550Z,1520524718.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:38.587Z,1520524718.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:38.947Z,1520524718.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:38.982Z,1520524718.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:39.323Z,1520524719.323 [NAL9602](INFO): Powering up NAL9602
2018-03-08T15:58:39.341Z,1520524719.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:39.361Z,1520524719.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:39.753Z,1520524719.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:39.785Z,1520524719.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:40.145Z,1520524720.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:40.173Z,1520524720.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:40.547Z,1520524720.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:40.589Z,1520524720.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:40.950Z,1520524720.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:40.972Z,1520524720.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:41.351Z,1520524721.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:41.366Z,1520524721.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:41.744Z,1520524721.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:41.768Z,1520524721.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:42.152Z,1520524722.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:42.198Z,1520524722.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:42.548Z,1520524722.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:42.590Z,1520524722.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:42.950Z,1520524722.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:42.965Z,1520524722.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:43.357Z,1520524723.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:43.372Z,1520524723.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:43.752Z,1520524723.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:43.792Z,1520524723.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:44.151Z,1520524724.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:44.197Z,1520524724.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:44.550Z,1520524724.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:44.574Z,1520524724.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:44.957Z,1520524724.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:44.972Z,1520524724.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:45.345Z,1520524725.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:45.378Z,1520524725.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:45.756Z,1520524725.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:45.772Z,1520524725.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:46.160Z,1520524726.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:46.174Z,1520524726.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:46.549Z,1520524726.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:46.564Z,1520524726.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:46.945Z,1520524726.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:46.975Z,1520524726.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:47.357Z,1520524727.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:47.372Z,1520524727.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:47.751Z,1520524727.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:47.766Z,1520524727.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:48.159Z,1520524728.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:48.179Z,1520524728.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:48.554Z,1520524728.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:48.595Z,1520524728.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:48.948Z,1520524728.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:48.991Z,1520524728.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:49.355Z,1520524729.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:49.379Z,1520524729.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:49.764Z,1520524729.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:49.779Z,1520524729.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:50.122Z,1520524730.122 [NAL9602](INFO): NAL9602 initialized
2018-03-08T15:58:50.140Z,1520524730.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:50.178Z,1520524730.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:50.557Z,1520524730.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:50.576Z,1520524730.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:50.964Z,1520524730.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:50.996Z,1520524730.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:51.362Z,1520524731.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:51.377Z,1520524731.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:51.767Z,1520524731.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:51.782Z,1520524731.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:52.161Z,1520524732.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:52.177Z,1520524732.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:55.260Z,1520524735.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:55.276Z,1520524735.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:55.380Z,1520524735.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:55.416Z,1520524735.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:55.753Z,1520524735.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:55.767Z,1520524735.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:56.155Z,1520524736.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:56.170Z,1520524736.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:56.539Z,1520524736.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:56.578Z,1520524736.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:56.931Z,1520524736.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:56.967Z,1520524736.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:57.323Z,1520524737.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:57.344Z,1520524737.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:57.720Z,1520524737.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:57.742Z,1520524737.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:58.143Z,1520524738.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:58.172Z,1520524738.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:58.541Z,1520524738.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:58.572Z,1520524738.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:58.939Z,1520524738.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:58.971Z,1520524738.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:59.329Z,1520524739.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:59.348Z,1520524739.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:58:59.731Z,1520524739.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:58:59.775Z,1520524739.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:00.138Z,1520524740.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:00.173Z,1520524740.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:00.548Z,1520524740.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:00.575Z,1520524740.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:00.931Z,1520524740.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:00.954Z,1520524740.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:01.328Z,1520524741.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:01.375Z,1520524741.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:01.729Z,1520524741.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:01.746Z,1520524741.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:02.148Z,1520524742.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:02.173Z,1520524742.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:02.544Z,1520524742.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:02.575Z,1520524742.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:02.938Z,1520524742.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:02.982Z,1520524742.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:03.327Z,1520524743.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:03.348Z,1520524743.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:03.723Z,1520524743.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:03.743Z,1520524743.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:04.148Z,1520524744.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:04.175Z,1520524744.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:04.542Z,1520524744.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:04.573Z,1520524744.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:04.934Z,1520524744.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:04.954Z,1520524744.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:05.332Z,1520524745.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:05.353Z,1520524745.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:05.736Z,1520524745.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:05.750Z,1520524745.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:06.146Z,1520524746.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:06.175Z,1520524746.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:06.538Z,1520524746.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:06.575Z,1520524746.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:06.949Z,1520524746.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:06.973Z,1520524746.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:07.336Z,1520524747.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:07.375Z,1520524747.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:07.731Z,1520524747.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:07.777Z,1520524747.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:08.146Z,1520524748.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:08.179Z,1520524748.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:08.531Z,1520524748.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:08.574Z,1520524748.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:08.948Z,1520524748.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:08.982Z,1520524748.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:09.333Z,1520524749.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:09.381Z,1520524749.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:09.721Z,1520524749.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:09.743Z,1520524749.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:10.134Z,1520524750.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:10.154Z,1520524750.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:10.547Z,1520524750.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:10.583Z,1520524750.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:10.931Z,1520524750.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:10.975Z,1520524750.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:11.328Z,1520524751.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:11.357Z,1520524751.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:11.731Z,1520524751.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:11.751Z,1520524751.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:12.148Z,1520524752.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:12.179Z,1520524752.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:12.538Z,1520524752.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:12.582Z,1520524752.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:12.946Z,1520524752.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:12.979Z,1520524752.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:13.332Z,1520524753.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:13.382Z,1520524753.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:13.735Z,1520524753.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:13.782Z,1520524753.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:14.146Z,1520524754.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:14.183Z,1520524754.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:14.531Z,1520524754.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:14.558Z,1520524754.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:14.938Z,1520524754.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:14.957Z,1520524754.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:15.337Z,1520524755.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:15.352Z,1520524755.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:15.723Z,1520524755.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:15.773Z,1520524755.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:16.137Z,1520524756.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:16.158Z,1520524756.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:16.544Z,1520524756.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:16.560Z,1520524756.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:16.939Z,1520524756.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:16.959Z,1520524756.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:17.335Z,1520524757.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:17.375Z,1520524757.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:17.734Z,1520524757.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:17.753Z,1520524757.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:18.137Z,1520524758.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:18.157Z,1520524758.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:18.544Z,1520524758.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:18.577Z,1520524758.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:18.937Z,1520524758.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:18.975Z,1520524758.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:19.328Z,1520524759.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:19.344Z,1520524759.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:19.734Z,1520524759.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:19.754Z,1520524759.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:20.140Z,1520524760.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:20.185Z,1520524760.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:20.537Z,1520524760.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:20.582Z,1520524760.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:20.937Z,1520524760.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:20.958Z,1520524760.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:21.336Z,1520524761.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:21.355Z,1520524761.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:21.719Z,1520524761.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:21.751Z,1520524761.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:22.136Z,1520524762.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:22.178Z,1520524762.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:22.541Z,1520524762.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:22.561Z,1520524762.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:22.939Z,1520524762.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:22.958Z,1520524762.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:23.331Z,1520524763.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:23.354Z,1520524763.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:23.733Z,1520524763.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:23.763Z,1520524763.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:24.142Z,1520524764.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:24.162Z,1520524764.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:24.545Z,1520524764.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:24.561Z,1520524764.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:24.944Z,1520524764.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:24.959Z,1520524764.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:25.337Z,1520524765.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:25.383Z,1520524765.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:25.730Z,1520524765.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:25.758Z,1520524765.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:26.151Z,1520524766.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:26.166Z,1520524766.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:26.543Z,1520524766.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:26.563Z,1520524766.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:26.946Z,1520524766.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:26.994Z,1520524766.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:27.337Z,1520524767.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:27.357Z,1520524767.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:27.720Z,1520524767.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:27.757Z,1520524767.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:28.150Z,1520524768.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:28.166Z,1520524768.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:28.553Z,1520524768.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:28.589Z,1520524768.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:28.938Z,1520524768.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:28.971Z,1520524768.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:29.327Z,1520524769.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:29.358Z,1520524769.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.387948 seconds old.
2018-03-08T15:59:29.359Z,1520524769.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:29.360Z,1520524769.360 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.388290 seconds old.
2018-03-08T15:59:29.362Z,1520524769.362 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.388670 seconds old.
2018-03-08T15:59:29.718Z,1520524769.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:29.754Z,1520524769.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.783036 seconds old.
2018-03-08T15:59:29.755Z,1520524769.755 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:29.755Z,1520524769.755 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 165
2018-03-08T15:59:29.755Z,1520524769.755 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T15:59:29.756Z,1520524769.756 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.783884 seconds old.
2018-03-08T15:59:29.757Z,1520524769.757 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:29.757Z,1520524769.757 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 165
2018-03-08T15:59:29.757Z,1520524769.757 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T15:59:29.758Z,1520524769.758 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.785223 seconds old.
2018-03-08T15:59:29.759Z,1520524769.759 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:29.759Z,1520524769.759 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 165
2018-03-08T15:59:29.759Z,1520524769.759 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T15:59:29.771Z,1520524769.771 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T15:59:29.772Z,1520524769.772 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T15:59:29.772Z,1520524769.772 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T15:59:30.142Z,1520524770.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:30.173Z,1520524770.173 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T15:59:30.173Z,1520524770.173 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 165
2018-03-08T15:59:30.173Z,1520524770.173 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T15:59:30.174Z,1520524770.174 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 165
2018-03-08T15:59:30.174Z,1520524770.174 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T15:59:30.174Z,1520524770.174 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 165
2018-03-08T15:59:30.540Z,1520524770.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:30.579Z,1520524770.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T15:59:30.579Z,1520524770.579 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:59:30.580Z,1520524770.580 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:59:30.580Z,1520524770.580 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T15:59:30.581Z,1520524770.581 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:59:30.582Z,1520524770.582 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:59:30.582Z,1520524770.582 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T15:59:30.582Z,1520524770.582 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T15:59:30.583Z,1520524770.583 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T15:59:30.932Z,1520524770.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:30.964Z,1520524770.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T15:59:30.965Z,1520524770.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:31.328Z,1520524771.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:31.359Z,1520524771.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T15:59:31.360Z,1520524771.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:31.723Z,1520524771.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:31.762Z,1520524771.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T15:59:31.763Z,1520524771.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:32.133Z,1520524772.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:32.170Z,1520524772.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T15:59:32.171Z,1520524772.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:32.529Z,1520524772.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:32.575Z,1520524772.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T15:59:32.577Z,1520524772.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:32.936Z,1520524772.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:32.965Z,1520524772.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T15:59:32.966Z,1520524772.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:33.324Z,1520524773.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:33.356Z,1520524773.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T15:59:33.357Z,1520524773.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:33.716Z,1520524773.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:33.732Z,1520524773.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T15:59:33.733Z,1520524773.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:34.134Z,1520524774.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:34.166Z,1520524774.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T15:59:34.167Z,1520524774.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:34.540Z,1520524774.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:34.567Z,1520524774.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T15:59:34.568Z,1520524774.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:34.934Z,1520524774.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:34.978Z,1520524774.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T15:59:34.979Z,1520524774.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:35.328Z,1520524775.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:35.364Z,1520524775.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T15:59:35.369Z,1520524775.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:35.726Z,1520524775.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:35.771Z,1520524775.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T15:59:35.772Z,1520524775.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:36.141Z,1520524776.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:36.174Z,1520524776.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T15:59:36.175Z,1520524776.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:36.554Z,1520524776.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:36.578Z,1520524776.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T15:59:36.579Z,1520524776.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:36.936Z,1520524776.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:36.968Z,1520524776.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T15:59:36.969Z,1520524776.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:37.327Z,1520524777.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:37.364Z,1520524777.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T15:59:37.369Z,1520524777.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:37.732Z,1520524777.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:37.770Z,1520524777.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T15:59:37.771Z,1520524777.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:38.137Z,1520524778.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:38.179Z,1520524778.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T15:59:38.180Z,1520524778.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:38.529Z,1520524778.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:38.574Z,1520524778.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T15:59:38.574Z,1520524778.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:38.949Z,1520524778.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:38.978Z,1520524778.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T15:59:38.979Z,1520524778.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:39.338Z,1520524779.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:39.376Z,1520524779.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T15:59:39.377Z,1520524779.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:39.722Z,1520524779.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:39.770Z,1520524779.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T15:59:39.771Z,1520524779.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:40.147Z,1520524780.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:40.174Z,1520524780.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T15:59:40.175Z,1520524780.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:40.544Z,1520524780.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:40.571Z,1520524780.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T15:59:40.572Z,1520524780.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:40.931Z,1520524780.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:40.949Z,1520524780.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T15:59:40.950Z,1520524780.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:41.332Z,1520524781.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:41.382Z,1520524781.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T15:59:41.383Z,1520524781.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:41.727Z,1520524781.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:41.766Z,1520524781.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T15:59:41.767Z,1520524781.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:42.149Z,1520524782.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:42.179Z,1520524782.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T15:59:42.179Z,1520524782.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:42.544Z,1520524782.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:42.567Z,1520524782.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T15:59:42.568Z,1520524782.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:42.945Z,1520524782.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:42.977Z,1520524782.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T15:59:42.978Z,1520524782.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:43.332Z,1520524783.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:43.350Z,1520524783.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T15:59:43.352Z,1520524783.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:43.734Z,1520524783.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:43.754Z,1520524783.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T15:59:43.755Z,1520524783.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:44.140Z,1520524784.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:44.155Z,1520524784.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T15:59:44.156Z,1520524784.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:44.537Z,1520524784.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:44.581Z,1520524784.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T15:59:44.582Z,1520524784.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:44.937Z,1520524784.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:44.957Z,1520524784.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T15:59:44.958Z,1520524784.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:45.329Z,1520524785.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:45.358Z,1520524785.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T15:59:45.359Z,1520524785.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:45.729Z,1520524785.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:45.748Z,1520524785.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T15:59:45.749Z,1520524785.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:46.136Z,1520524786.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:46.179Z,1520524786.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T15:59:46.180Z,1520524786.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:46.538Z,1520524786.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:46.560Z,1520524786.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T15:59:46.561Z,1520524786.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:46.939Z,1520524786.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:46.957Z,1520524786.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T15:59:46.958Z,1520524786.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:47.337Z,1520524787.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:47.352Z,1520524787.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T15:59:47.353Z,1520524787.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:47.731Z,1520524787.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:47.777Z,1520524787.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T15:59:47.778Z,1520524787.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:48.138Z,1520524788.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:48.158Z,1520524788.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T15:59:48.159Z,1520524788.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:48.544Z,1520524788.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:48.560Z,1520524788.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T15:59:48.561Z,1520524788.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:48.944Z,1520524788.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:48.959Z,1520524788.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T15:59:48.960Z,1520524788.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:49.328Z,1520524789.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:49.368Z,1520524789.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T15:59:49.385Z,1520524789.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:49.732Z,1520524789.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:49.750Z,1520524789.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T15:59:49.752Z,1520524789.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:50.143Z,1520524790.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:50.160Z,1520524790.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:50.545Z,1520524790.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:50.561Z,1520524790.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:50.940Z,1520524790.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:50.981Z,1520524790.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:51.337Z,1520524791.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:51.357Z,1520524791.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:51.737Z,1520524791.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:51.757Z,1520524791.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:52.143Z,1520524792.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:52.159Z,1520524792.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:52.541Z,1520524792.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:52.581Z,1520524792.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:55.638Z,1520524795.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:55.654Z,1520524795.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:55.754Z,1520524795.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:55.785Z,1520524795.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:56.135Z,1520524796.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:56.167Z,1520524796.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:56.532Z,1520524796.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:56.553Z,1520524796.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:56.939Z,1520524796.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:56.955Z,1520524796.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:57.338Z,1520524797.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:57.382Z,1520524797.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:57.734Z,1520524797.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:57.761Z,1520524797.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:58.138Z,1520524798.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:58.157Z,1520524798.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:58.530Z,1520524798.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:58.559Z,1520524798.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:58.922Z,1520524798.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:58.969Z,1520524798.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:59.323Z,1520524799.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:59.355Z,1520524799.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T15:59:59.718Z,1520524799.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T15:59:59.756Z,1520524799.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:00.145Z,1520524800.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:00.161Z,1520524800.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:00.541Z,1520524800.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:00.578Z,1520524800.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:00.943Z,1520524800.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:00.963Z,1520524800.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:01.320Z,1520524801.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:01.350Z,1520524801.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:01.727Z,1520524801.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:01.759Z,1520524801.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:02.134Z,1520524802.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:02.179Z,1520524802.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:02.546Z,1520524802.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:02.566Z,1520524802.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:02.929Z,1520524802.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:02.963Z,1520524802.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:03.320Z,1520524803.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:03.361Z,1520524803.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:03.719Z,1520524803.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:03.767Z,1520524803.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:04.134Z,1520524804.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:04.167Z,1520524804.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:04.534Z,1520524804.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:04.563Z,1520524804.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:04.938Z,1520524804.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:04.970Z,1520524804.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:05.319Z,1520524805.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:05.369Z,1520524805.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:05.718Z,1520524805.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:05.733Z,1520524805.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:06.139Z,1520524806.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:06.168Z,1520524806.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:06.554Z,1520524806.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:06.569Z,1520524806.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:06.950Z,1520524806.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:06.986Z,1520524806.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:07.327Z,1520524807.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:07.369Z,1520524807.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:07.729Z,1520524807.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:07.750Z,1520524807.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:08.137Z,1520524808.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:08.152Z,1520524808.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:08.538Z,1520524808.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:08.579Z,1520524808.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:08.932Z,1520524808.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:08.951Z,1520524808.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:09.331Z,1520524809.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:09.351Z,1520524809.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:09.728Z,1520524809.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:09.747Z,1520524809.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:10.134Z,1520524810.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:10.176Z,1520524810.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:10.533Z,1520524810.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:10.558Z,1520524810.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:10.932Z,1520524810.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:10.953Z,1520524810.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:11.327Z,1520524811.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:11.347Z,1520524811.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:11.730Z,1520524811.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:11.755Z,1520524811.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:12.132Z,1520524812.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:12.150Z,1520524812.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:12.539Z,1520524812.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:12.558Z,1520524812.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:12.942Z,1520524812.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:12.958Z,1520524812.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:13.331Z,1520524813.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:13.378Z,1520524813.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:13.728Z,1520524813.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:13.744Z,1520524813.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:14.138Z,1520524814.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:14.158Z,1520524814.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:14.541Z,1520524814.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:14.557Z,1520524814.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:14.937Z,1520524814.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:14.978Z,1520524814.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:15.328Z,1520524815.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:15.343Z,1520524815.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:15.730Z,1520524815.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:15.751Z,1520524815.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:16.138Z,1520524816.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:16.154Z,1520524816.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:16.537Z,1520524816.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:16.581Z,1520524816.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:16.937Z,1520524816.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:16.958Z,1520524816.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:17.330Z,1520524817.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:17.351Z,1520524817.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:17.729Z,1520524817.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:17.748Z,1520524817.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:18.136Z,1520524818.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:18.178Z,1520524818.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:18.541Z,1520524818.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:18.561Z,1520524818.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:18.940Z,1520524818.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:18.958Z,1520524818.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:19.323Z,1520524819.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:19.355Z,1520524819.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:19.719Z,1520524819.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:19.769Z,1520524819.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:20.138Z,1520524820.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:20.159Z,1520524820.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:20.535Z,1520524820.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:20.561Z,1520524820.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:20.946Z,1520524820.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:20.962Z,1520524820.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:21.319Z,1520524821.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:21.355Z,1520524821.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:21.722Z,1520524821.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:21.758Z,1520524821.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:22.134Z,1520524822.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:22.154Z,1520524822.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:22.545Z,1520524822.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:22.572Z,1520524822.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:22.929Z,1520524822.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:22.971Z,1520524822.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:23.323Z,1520524823.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:23.362Z,1520524823.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:23.718Z,1520524823.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:23.753Z,1520524823.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:24.147Z,1520524824.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:24.162Z,1520524824.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:24.542Z,1520524824.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:24.574Z,1520524824.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:24.933Z,1520524824.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:24.963Z,1520524824.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:25.321Z,1520524825.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:25.353Z,1520524825.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:25.722Z,1520524825.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:25.763Z,1520524825.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:26.133Z,1520524826.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:26.171Z,1520524826.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:26.534Z,1520524826.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:26.570Z,1520524826.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:26.944Z,1520524826.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:26.968Z,1520524826.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:27.325Z,1520524827.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:27.345Z,1520524827.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:27.723Z,1520524827.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:27.771Z,1520524827.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:28.134Z,1520524828.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:28.163Z,1520524828.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:28.543Z,1520524828.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:28.571Z,1520524828.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:28.944Z,1520524828.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:28.970Z,1520524828.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:29.321Z,1520524829.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:29.370Z,1520524829.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:29.727Z,1520524829.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:29.742Z,1520524829.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:30.134Z,1520524830.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:30.154Z,1520524830.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:30.537Z,1520524830.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:30.552Z,1520524830.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:30.932Z,1520524830.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:30.978Z,1520524830.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:31.330Z,1520524831.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:31.358Z,1520524831.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:31.729Z,1520524831.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:31.750Z,1520524831.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:32.137Z,1520524832.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:32.152Z,1520524832.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:32.538Z,1520524832.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:32.582Z,1520524832.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:32.934Z,1520524832.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:32.959Z,1520524832.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:33.331Z,1520524833.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:33.351Z,1520524833.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:33.729Z,1520524833.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:33.748Z,1520524833.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:34.134Z,1520524834.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:34.176Z,1520524834.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:34.537Z,1520524834.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:34.558Z,1520524834.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:34.934Z,1520524834.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:34.954Z,1520524834.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:35.327Z,1520524835.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:35.347Z,1520524835.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:35.730Z,1520524835.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:35.755Z,1520524835.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:36.134Z,1520524836.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:36.154Z,1520524836.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:36.533Z,1520524836.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:36.553Z,1520524836.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:36.937Z,1520524836.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:36.952Z,1520524836.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:37.328Z,1520524837.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:37.374Z,1520524837.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:37.729Z,1520524837.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:37.745Z,1520524837.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:38.134Z,1520524838.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:38.154Z,1520524838.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:38.541Z,1520524838.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:38.556Z,1520524838.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:38.937Z,1520524838.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:38.982Z,1520524838.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:39.329Z,1520524839.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:39.344Z,1520524839.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:39.726Z,1520524839.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:39.747Z,1520524839.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:40.139Z,1520524840.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:40.159Z,1520524840.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:40.538Z,1520524840.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:40.577Z,1520524840.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:40.934Z,1520524840.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:40.966Z,1520524840.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:41.319Z,1520524841.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:41.351Z,1520524841.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:41.720Z,1520524841.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:41.758Z,1520524841.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:42.141Z,1520524842.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:42.187Z,1520524842.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:42.541Z,1520524842.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:42.561Z,1520524842.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:42.942Z,1520524842.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:42.959Z,1520524842.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:43.337Z,1520524843.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:43.352Z,1520524843.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:43.719Z,1520524843.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:43.769Z,1520524843.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:44.142Z,1520524844.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:44.162Z,1520524844.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:44.539Z,1520524844.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:44.558Z,1520524844.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:44.946Z,1520524844.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:44.961Z,1520524844.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:45.319Z,1520524845.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:45.355Z,1520524845.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:45.712Z,1520524845.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:45.741Z,1520524845.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:46.144Z,1520524846.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:46.162Z,1520524846.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:46.552Z,1520524846.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:46.591Z,1520524846.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:46.933Z,1520524846.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:46.971Z,1520524846.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:47.319Z,1520524847.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:47.348Z,1520524847.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:47.714Z,1520524847.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:47.756Z,1520524847.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:48.143Z,1520524848.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:48.158Z,1520524848.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:48.542Z,1520524848.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:48.587Z,1520524848.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:48.938Z,1520524848.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:48.959Z,1520524848.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:49.323Z,1520524849.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:49.355Z,1520524849.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:49.719Z,1520524849.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:49.758Z,1520524849.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:50.143Z,1520524850.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:50.172Z,1520524850.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:50.525Z,1520524850.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:50.569Z,1520524850.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:50.947Z,1520524850.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:50.963Z,1520524850.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:51.320Z,1520524851.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:51.357Z,1520524851.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:51.360Z,1520524851.360 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T15:55:50.0Z
2018-03-08T16:00:51.361Z,1520524851.361 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T16:00:51.361Z,1520524851.361 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T16:00:51.718Z,1520524851.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:51.761Z,1520524851.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:52.239Z,1520524852.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:52.255Z,1520524852.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:52.542Z,1520524852.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:52.567Z,1520524852.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:55.742Z,1520524855.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:55.760Z,1520524855.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:55.858Z,1520524855.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:55.901Z,1520524855.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:56.193Z,1520524856.193 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20180308T074127/Courier0192.lzma
2018-03-08T16:00:56.218Z,1520524856.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:56.256Z,1520524856.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:56.614Z,1520524856.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:56.629Z,1520524856.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:56.995Z,1520524856.995 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0192.lzma.bak
2018-03-08T16:00:56.995Z,1520524856.995 [DataOverHttps](INFO): SBD MOMSN=7987092
2018-03-08T16:00:57.016Z,1520524857.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:57.032Z,1520524857.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:57.609Z,1520524857.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:57.625Z,1520524857.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:57.821Z,1520524857.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:57.853Z,1520524857.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:00:58.229Z,1520524858.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:00:58.265Z,1520524858.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:01.312Z,1520524861.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:01.327Z,1520524861.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:01.417Z,1520524861.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:01.432Z,1520524861.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:01.805Z,1520524861.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:01.820Z,1520524861.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:02.189Z,1520524862.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:02.215Z,1520524862.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:02.589Z,1520524862.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:02.627Z,1520524862.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:02.981Z,1520524862.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:02.996Z,1520524862.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:03.380Z,1520524863.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:03.395Z,1520524863.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:06.476Z,1520524866.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:06.491Z,1520524866.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:06.597Z,1520524866.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:06.621Z,1520524866.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:06.945Z,1520524866.945 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0193.lzma
2018-03-08T16:01:06.993Z,1520524866.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:07.023Z,1520524867.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:07.377Z,1520524867.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:07.399Z,1520524867.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:07.739Z,1520524867.739 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0193.lzma.bak
2018-03-08T16:01:07.739Z,1520524867.739 [DataOverHttps](INFO): SBD MOMSN=7987096
2018-03-08T16:01:07.779Z,1520524867.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:07.811Z,1520524867.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:08.342Z,1520524868.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:08.381Z,1520524868.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:08.384Z,1520524868.384 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T16:01:08.384Z,1520524868.384 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T16:01:08.384Z,1520524868.384 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T16:01:08.571Z,1520524868.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:08.586Z,1520524868.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:11.681Z,1520524871.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:11.696Z,1520524871.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:11.801Z,1520524871.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:11.825Z,1520524871.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:12.202Z,1520524872.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:12.229Z,1520524872.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:12.594Z,1520524872.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:12.621Z,1520524872.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:12.987Z,1520524872.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:13.003Z,1520524873.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:13.388Z,1520524873.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:13.403Z,1520524873.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:13.786Z,1520524873.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:13.806Z,1520524873.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:14.205Z,1520524874.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:14.227Z,1520524874.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:14.609Z,1520524874.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:14.638Z,1520524874.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:14.998Z,1520524874.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:15.025Z,1520524875.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:15.387Z,1520524875.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:15.403Z,1520524875.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:15.791Z,1520524875.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:15.809Z,1520524875.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:16.192Z,1520524876.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:16.207Z,1520524876.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:16.589Z,1520524876.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:16.610Z,1520524876.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:16.989Z,1520524876.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:17.004Z,1520524877.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:17.405Z,1520524877.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:17.436Z,1520524877.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:17.801Z,1520524877.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:17.816Z,1520524877.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:18.206Z,1520524878.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:18.237Z,1520524878.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:18.594Z,1520524878.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:18.614Z,1520524878.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:18.994Z,1520524878.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:19.010Z,1520524879.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:19.394Z,1520524879.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:19.414Z,1520524879.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:19.795Z,1520524879.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:19.811Z,1520524879.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:20.197Z,1520524880.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:20.212Z,1520524880.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:20.601Z,1520524880.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:20.616Z,1520524880.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:20.997Z,1520524880.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:21.013Z,1520524881.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:21.395Z,1520524881.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:21.410Z,1520524881.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:21.790Z,1520524881.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:21.805Z,1520524881.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:22.197Z,1520524882.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:22.212Z,1520524882.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:22.606Z,1520524882.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:22.670Z,1520524882.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:22.995Z,1520524882.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:23.010Z,1520524883.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:23.398Z,1520524883.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:23.413Z,1520524883.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:23.797Z,1520524883.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:23.812Z,1520524883.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:24.209Z,1520524884.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:24.224Z,1520524884.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:24.592Z,1520524884.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:24.614Z,1520524884.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:24.995Z,1520524884.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:25.010Z,1520524885.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:25.400Z,1520524885.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:25.415Z,1520524885.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:25.797Z,1520524885.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:25.813Z,1520524885.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:26.201Z,1520524886.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:26.216Z,1520524886.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:26.601Z,1520524886.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:26.616Z,1520524886.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:27.001Z,1520524887.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:27.017Z,1520524887.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:27.397Z,1520524887.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:27.412Z,1520524887.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:27.796Z,1520524887.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:27.811Z,1520524887.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:28.189Z,1520524888.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:28.210Z,1520524888.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:28.591Z,1520524888.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:28.612Z,1520524888.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:28.999Z,1520524888.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:29.015Z,1520524889.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:29.402Z,1520524889.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:29.418Z,1520524889.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:29.801Z,1520524889.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:29.817Z,1520524889.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:30.201Z,1520524890.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:30.217Z,1520524890.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:30.596Z,1520524890.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:30.611Z,1520524890.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:30.989Z,1520524890.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:31.010Z,1520524891.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:31.389Z,1520524891.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:31.409Z,1520524891.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:31.795Z,1520524891.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:31.810Z,1520524891.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:32.202Z,1520524892.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:32.217Z,1520524892.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:32.602Z,1520524892.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:32.617Z,1520524892.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:33.001Z,1520524893.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:33.016Z,1520524893.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:33.395Z,1520524893.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:33.411Z,1520524893.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:33.795Z,1520524893.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:33.811Z,1520524893.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:34.189Z,1520524894.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:34.213Z,1520524894.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:34.595Z,1520524894.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:34.611Z,1520524894.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:34.998Z,1520524894.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:35.019Z,1520524895.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:35.401Z,1520524895.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:35.416Z,1520524895.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:35.807Z,1520524895.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:35.831Z,1520524895.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:36.204Z,1520524896.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:36.219Z,1520524896.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:36.584Z,1520524896.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:36.610Z,1520524896.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:36.996Z,1520524896.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:37.011Z,1520524897.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:37.383Z,1520524897.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:37.409Z,1520524897.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:37.782Z,1520524897.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:37.817Z,1520524897.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:38.205Z,1520524898.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:38.220Z,1520524898.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:38.607Z,1520524898.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:38.626Z,1520524898.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:39.006Z,1520524899.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:39.021Z,1520524899.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:39.383Z,1520524899.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:39.419Z,1520524899.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:39.784Z,1520524899.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:39.810Z,1520524899.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:40.183Z,1520524900.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:40.209Z,1520524900.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:40.587Z,1520524900.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:40.613Z,1520524900.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:40.982Z,1520524900.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:41.008Z,1520524901.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:41.405Z,1520524901.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:41.420Z,1520524901.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:41.809Z,1520524901.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:41.824Z,1520524901.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:42.201Z,1520524902.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:42.216Z,1520524902.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:42.582Z,1520524902.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:42.609Z,1520524902.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:42.986Z,1520524902.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:43.012Z,1520524903.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:43.387Z,1520524903.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:43.413Z,1520524903.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:43.783Z,1520524903.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:43.809Z,1520524903.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:44.205Z,1520524904.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:44.221Z,1520524904.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:44.605Z,1520524904.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:44.621Z,1520524904.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:45.001Z,1520524905.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:45.017Z,1520524905.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:45.383Z,1520524905.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:45.408Z,1520524905.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:45.782Z,1520524905.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:45.819Z,1520524905.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:46.184Z,1520524906.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:46.210Z,1520524906.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:46.588Z,1520524906.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:46.614Z,1520524906.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:46.982Z,1520524906.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:47.014Z,1520524907.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:47.398Z,1520524907.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:47.413Z,1520524907.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:47.809Z,1520524907.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:47.824Z,1520524907.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:48.231Z,1520524908.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:48.271Z,1520524908.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:48.582Z,1520524908.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:48.615Z,1520524908.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:48.987Z,1520524908.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:49.013Z,1520524909.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:49.387Z,1520524909.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:49.414Z,1520524909.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:49.805Z,1520524909.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:49.837Z,1520524909.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:50.203Z,1520524910.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:50.227Z,1520524910.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:50.615Z,1520524910.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:50.631Z,1520524910.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:50.999Z,1520524910.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:51.031Z,1520524911.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:51.394Z,1520524911.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:51.423Z,1520524911.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:51.782Z,1520524911.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:51.808Z,1520524911.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:52.197Z,1520524912.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:52.219Z,1520524912.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:52.595Z,1520524912.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:52.610Z,1520524912.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:52.998Z,1520524912.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:53.018Z,1520524913.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:53.403Z,1520524913.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:53.417Z,1520524913.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:53.805Z,1520524913.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:53.820Z,1520524913.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:53.833Z,1520524913.833 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T16:01:54.205Z,1520524914.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:54.220Z,1520524914.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:54.582Z,1520524914.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:54.609Z,1520524914.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:54.983Z,1520524914.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:55.009Z,1520524915.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:55.383Z,1520524915.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:55.409Z,1520524915.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:55.783Z,1520524915.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:55.809Z,1520524915.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:56.205Z,1520524916.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:56.221Z,1520524916.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:56.604Z,1520524916.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:56.626Z,1520524916.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:57.005Z,1520524917.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:57.020Z,1520524917.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:57.387Z,1520524917.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:57.413Z,1520524917.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:57.798Z,1520524917.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:57.818Z,1520524917.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:58.183Z,1520524918.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:58.223Z,1520524918.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:58.583Z,1520524918.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:58.615Z,1520524918.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:58.986Z,1520524918.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:59.018Z,1520524919.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:59.393Z,1520524919.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:59.426Z,1520524919.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:01:59.809Z,1520524919.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:01:59.824Z,1520524919.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:00.194Z,1520524920.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:00.227Z,1520524920.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:00.586Z,1520524920.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:00.618Z,1520524920.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:00.987Z,1520524920.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:01.018Z,1520524921.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:01.387Z,1520524921.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:01.418Z,1520524921.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:01.782Z,1520524921.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:01.818Z,1520524921.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:02.205Z,1520524922.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:02.220Z,1520524922.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:02.609Z,1520524922.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:02.624Z,1520524922.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:02.993Z,1520524922.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:03.022Z,1520524923.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:03.381Z,1520524923.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:03.396Z,1520524923.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:03.786Z,1520524923.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:03.823Z,1520524923.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:04.190Z,1520524924.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:04.224Z,1520524924.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:04.588Z,1520524924.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:04.619Z,1520524924.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:04.991Z,1520524924.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:05.026Z,1520524925.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:05.401Z,1520524925.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:05.428Z,1520524925.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:05.791Z,1520524925.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:05.807Z,1520524925.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:06.206Z,1520524926.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:06.228Z,1520524926.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:06.591Z,1520524926.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:06.606Z,1520524926.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:06.990Z,1520524926.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:07.010Z,1520524927.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:07.393Z,1520524927.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:07.409Z,1520524927.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:07.792Z,1520524927.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:07.809Z,1520524927.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:08.201Z,1520524928.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:08.233Z,1520524928.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:08.597Z,1520524928.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:08.613Z,1520524928.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:09.005Z,1520524929.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:09.042Z,1520524929.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:12.093Z,1520524932.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:12.109Z,1520524932.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:12.205Z,1520524932.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:12.221Z,1520524932.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:12.601Z,1520524932.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:12.622Z,1520524932.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:12.990Z,1520524932.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:13.006Z,1520524933.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:13.401Z,1520524933.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:13.422Z,1520524933.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:13.786Z,1520524933.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:13.801Z,1520524933.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:14.187Z,1520524934.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:14.203Z,1520524934.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:14.575Z,1520524934.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:14.607Z,1520524934.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:14.989Z,1520524934.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:15.004Z,1520524935.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:15.399Z,1520524935.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:15.415Z,1520524935.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:15.802Z,1520524935.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:15.817Z,1520524935.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:16.193Z,1520524936.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:16.210Z,1520524936.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:16.571Z,1520524936.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:16.606Z,1520524936.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:16.978Z,1520524936.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:17.005Z,1520524937.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:17.375Z,1520524937.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:17.407Z,1520524937.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:17.768Z,1520524937.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:17.783Z,1520524937.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:18.201Z,1520524938.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:18.217Z,1520524938.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:18.597Z,1520524938.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:18.612Z,1520524938.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:18.984Z,1520524938.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:19.012Z,1520524939.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:19.378Z,1520524939.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:19.414Z,1520524939.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:19.778Z,1520524939.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:19.816Z,1520524939.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:20.180Z,1520524940.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:20.211Z,1520524940.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:20.576Z,1520524940.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:20.615Z,1520524940.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:20.975Z,1520524940.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:20.990Z,1520524940.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:21.397Z,1520524941.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:21.422Z,1520524941.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:21.797Z,1520524941.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:21.826Z,1520524941.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:22.194Z,1520524942.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:22.222Z,1520524942.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:22.575Z,1520524942.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:22.591Z,1520524942.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:22.984Z,1520524942.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:22.999Z,1520524942.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:23.382Z,1520524943.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:23.397Z,1520524943.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:23.775Z,1520524943.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:23.791Z,1520524943.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:24.194Z,1520524944.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:24.224Z,1520524944.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:24.601Z,1520524944.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:24.624Z,1520524944.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:24.989Z,1520524944.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:25.025Z,1520524945.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:25.386Z,1520524945.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:25.423Z,1520524945.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:25.779Z,1520524945.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:25.803Z,1520524945.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:26.185Z,1520524946.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:26.200Z,1520524946.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:26.582Z,1520524946.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:26.602Z,1520524946.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:26.980Z,1520524946.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:26.995Z,1520524946.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:27.385Z,1520524947.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:27.401Z,1520524947.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:27.801Z,1520524947.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:27.823Z,1520524947.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:28.197Z,1520524948.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:28.226Z,1520524948.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:28.577Z,1520524948.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:28.593Z,1520524948.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:28.984Z,1520524948.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:29.000Z,1520524949.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:29.385Z,1520524949.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:29.400Z,1520524949.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:29.781Z,1520524949.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:29.796Z,1520524949.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:30.199Z,1520524950.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:30.227Z,1520524950.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:30.593Z,1520524950.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:30.607Z,1520524950.607 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:30.608Z,1520524950.608 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 166
2018-03-08T16:02:30.608Z,1520524950.608 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T16:02:30.621Z,1520524950.621 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:30.622Z,1520524950.622 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 166
2018-03-08T16:02:30.622Z,1520524950.622 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T16:02:30.623Z,1520524950.623 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:30.623Z,1520524950.623 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 166
2018-03-08T16:02:30.624Z,1520524950.624 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T16:02:30.654Z,1520524950.654 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T16:02:30.654Z,1520524950.654 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T16:02:30.654Z,1520524950.654 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T16:02:30.990Z,1520524950.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:31.016Z,1520524951.016 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T16:02:31.016Z,1520524951.016 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 166
2018-03-08T16:02:31.016Z,1520524951.016 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T16:02:31.016Z,1520524951.016 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 166
2018-03-08T16:02:31.029Z,1520524951.029 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T16:02:31.029Z,1520524951.029 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 166
2018-03-08T16:02:31.386Z,1520524951.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:31.405Z,1520524951.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T16:02:31.406Z,1520524951.406 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:02:31.406Z,1520524951.406 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:02:31.407Z,1520524951.407 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T16:02:31.407Z,1520524951.407 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:02:31.407Z,1520524951.407 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:02:31.408Z,1520524951.408 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T16:02:31.408Z,1520524951.408 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:02:31.408Z,1520524951.408 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:02:31.788Z,1520524951.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:31.802Z,1520524951.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T16:02:31.803Z,1520524951.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:32.188Z,1520524952.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:32.203Z,1520524952.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T16:02:32.204Z,1520524952.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:32.587Z,1520524952.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:32.602Z,1520524952.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T16:02:32.603Z,1520524952.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:32.982Z,1520524952.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:33.002Z,1520524953.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T16:02:33.003Z,1520524953.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:33.397Z,1520524953.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:33.412Z,1520524953.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T16:02:33.413Z,1520524953.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:33.797Z,1520524953.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:33.818Z,1520524953.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T16:02:33.819Z,1520524953.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:34.196Z,1520524954.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:34.211Z,1520524954.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T16:02:34.212Z,1520524954.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:34.584Z,1520524954.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:34.599Z,1520524954.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T16:02:34.600Z,1520524954.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:34.994Z,1520524954.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:35.014Z,1520524955.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T16:02:35.015Z,1520524955.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:35.387Z,1520524955.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:35.401Z,1520524955.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T16:02:35.402Z,1520524955.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:35.778Z,1520524955.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:35.805Z,1520524955.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T16:02:35.806Z,1520524955.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:36.194Z,1520524956.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:36.221Z,1520524956.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T16:02:36.222Z,1520524956.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:36.601Z,1520524956.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:36.615Z,1520524956.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T16:02:36.616Z,1520524956.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:36.984Z,1520524956.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:37.011Z,1520524957.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T16:02:37.012Z,1520524957.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:37.380Z,1520524957.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:37.414Z,1520524957.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T16:02:37.415Z,1520524957.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:37.774Z,1520524957.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:37.811Z,1520524957.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T16:02:37.812Z,1520524957.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:38.176Z,1520524958.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:38.207Z,1520524958.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T16:02:38.208Z,1520524958.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:38.579Z,1520524958.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:38.611Z,1520524958.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T16:02:38.612Z,1520524958.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:38.982Z,1520524958.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:39.018Z,1520524959.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T16:02:39.019Z,1520524959.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:39.404Z,1520524959.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:39.419Z,1520524959.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T16:02:39.420Z,1520524959.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:39.803Z,1520524959.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:39.818Z,1520524959.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T16:02:39.819Z,1520524959.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:40.203Z,1520524960.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:40.222Z,1520524960.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T16:02:40.223Z,1520524960.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:40.581Z,1520524960.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:40.596Z,1520524960.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T16:02:40.605Z,1520524960.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:40.982Z,1520524960.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:41.018Z,1520524961.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T16:02:41.019Z,1520524961.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:41.380Z,1520524961.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:41.394Z,1520524961.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T16:02:41.395Z,1520524961.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:41.777Z,1520524961.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:41.792Z,1520524961.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T16:02:41.793Z,1520524961.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:42.198Z,1520524962.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:42.232Z,1520524962.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T16:02:42.233Z,1520524962.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:42.593Z,1520524962.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:42.623Z,1520524962.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T16:02:42.624Z,1520524962.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:42.989Z,1520524962.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:43.009Z,1520524963.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T16:02:43.010Z,1520524963.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:43.385Z,1520524963.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:43.401Z,1520524963.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T16:02:43.402Z,1520524963.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:43.788Z,1520524963.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:43.802Z,1520524963.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T16:02:43.803Z,1520524963.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:44.186Z,1520524964.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:44.201Z,1520524964.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T16:02:44.202Z,1520524964.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:44.585Z,1520524964.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:44.606Z,1520524964.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T16:02:44.607Z,1520524964.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:44.982Z,1520524964.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:44.997Z,1520524964.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T16:02:44.998Z,1520524964.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:45.393Z,1520524965.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:45.409Z,1520524965.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T16:02:45.410Z,1520524965.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:45.805Z,1520524965.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:45.834Z,1520524965.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T16:02:45.835Z,1520524965.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:46.194Z,1520524966.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:46.209Z,1520524966.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T16:02:46.210Z,1520524966.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:46.568Z,1520524966.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:46.599Z,1520524966.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T16:02:46.600Z,1520524966.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:46.988Z,1520524966.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:47.002Z,1520524967.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T16:02:47.003Z,1520524967.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:47.381Z,1520524967.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:47.410Z,1520524967.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T16:02:47.411Z,1520524967.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:47.781Z,1520524967.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:47.802Z,1520524967.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T16:02:47.803Z,1520524967.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:48.195Z,1520524968.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:48.210Z,1520524968.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T16:02:48.211Z,1520524968.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:48.597Z,1520524968.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:48.611Z,1520524968.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T16:02:48.612Z,1520524968.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:48.995Z,1520524968.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:49.010Z,1520524969.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T16:02:49.011Z,1520524969.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:49.391Z,1520524969.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:49.406Z,1520524969.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T16:02:49.407Z,1520524969.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:49.781Z,1520524969.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:49.809Z,1520524969.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T16:02:49.809Z,1520524969.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:50.188Z,1520524970.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:50.205Z,1520524970.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T16:02:50.206Z,1520524970.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:50.592Z,1520524970.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:50.607Z,1520524970.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T16:02:50.608Z,1520524970.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:50.991Z,1520524970.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:51.010Z,1520524971.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:51.398Z,1520524971.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:51.414Z,1520524971.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:51.801Z,1520524971.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:51.822Z,1520524971.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:52.196Z,1520524972.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:52.215Z,1520524972.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:52.572Z,1520524972.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:52.596Z,1520524972.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:52.979Z,1520524972.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:53.006Z,1520524973.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:53.378Z,1520524973.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:53.404Z,1520524973.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:53.773Z,1520524973.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:53.811Z,1520524973.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:54.198Z,1520524974.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:54.213Z,1520524974.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:54.597Z,1520524974.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:54.618Z,1520524974.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:54.982Z,1520524974.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:55.015Z,1520524975.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:55.375Z,1520524975.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:55.406Z,1520524975.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:55.778Z,1520524975.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:55.817Z,1520524975.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:56.179Z,1520524976.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:56.214Z,1520524976.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:56.586Z,1520524976.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:56.617Z,1520524976.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:56.982Z,1520524976.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:56.997Z,1520524976.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:57.393Z,1520524977.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:57.425Z,1520524977.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:57.793Z,1520524977.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:57.828Z,1520524977.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:58.197Z,1520524978.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:58.226Z,1520524978.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:58.581Z,1520524978.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:58.596Z,1520524978.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:58.981Z,1520524978.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:58.996Z,1520524978.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:59.384Z,1520524979.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:59.398Z,1520524979.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:02:59.777Z,1520524979.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:02:59.799Z,1520524979.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:00.189Z,1520524980.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:00.205Z,1520524980.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:00.597Z,1520524980.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:00.627Z,1520524980.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:00.985Z,1520524980.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:01.000Z,1520524981.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:01.387Z,1520524981.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:01.403Z,1520524981.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:01.783Z,1520524981.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:01.798Z,1520524981.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:02.184Z,1520524982.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:02.206Z,1520524982.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:02.583Z,1520524982.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:02.599Z,1520524982.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:02.985Z,1520524982.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:02.000Z,1520524983.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:03.389Z,1520524983.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:03.405Z,1520524983.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:03.797Z,1520524983.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:03.831Z,1520524983.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:04.197Z,1520524984.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:04.230Z,1520524984.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:04.579Z,1520524984.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:04.603Z,1520524984.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:04.983Z,1520524984.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:04.998Z,1520524984.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:05.387Z,1520524985.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:05.406Z,1520524985.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:05.768Z,1520524985.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:05.804Z,1520524985.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:06.196Z,1520524986.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:06.218Z,1520524986.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:06.597Z,1520524986.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:06.619Z,1520524986.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:06.987Z,1520524986.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:07.014Z,1520524987.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:07.387Z,1520524987.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:07.407Z,1520524987.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:07.781Z,1520524987.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:07.804Z,1520524987.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:08.187Z,1520524988.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:08.203Z,1520524988.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:08.575Z,1520524988.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:08.607Z,1520524988.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:08.984Z,1520524988.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:08.999Z,1520524988.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:09.389Z,1520524989.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:09.405Z,1520524989.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:12.486Z,1520524992.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:12.502Z,1520524992.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:12.605Z,1520524992.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:12.631Z,1520524992.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:12.986Z,1520524992.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:13.005Z,1520524993.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:13.387Z,1520524993.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:13.403Z,1520524993.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:13.790Z,1520524993.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:13.806Z,1520524993.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:14.198Z,1520524994.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:14.219Z,1520524994.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:14.595Z,1520524994.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:14.611Z,1520524994.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:14.996Z,1520524994.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:15.018Z,1520524995.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:15.383Z,1520524995.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:15.398Z,1520524995.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:15.777Z,1520524995.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:15.803Z,1520524995.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:16.175Z,1520524996.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:16.203Z,1520524996.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:16.593Z,1520524996.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:16.608Z,1520524996.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:16.974Z,1520524996.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:16.995Z,1520524996.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:17.389Z,1520524997.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:17.405Z,1520524997.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:17.797Z,1520524997.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:17.812Z,1520524997.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:18.190Z,1520524998.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:18.206Z,1520524998.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:18.589Z,1520524998.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:18.645Z,1520524998.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:18.981Z,1520524998.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:18.996Z,1520524998.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:19.376Z,1520524999.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:19.391Z,1520524999.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:19.773Z,1520524999.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:19.788Z,1520524999.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:20.190Z,1520525000.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:20.205Z,1520525000.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:20.585Z,1520525000.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:20.601Z,1520525000.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:20.990Z,1520525000.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:21.006Z,1520525001.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:21.406Z,1520525001.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:21.433Z,1520525001.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:21.771Z,1520525001.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:21.791Z,1520525001.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:22.178Z,1520525002.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:22.211Z,1520525002.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:22.579Z,1520525002.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:22.612Z,1520525002.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:22.974Z,1520525002.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:23.013Z,1520525003.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:23.385Z,1520525003.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:23.413Z,1520525003.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:23.799Z,1520525003.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:23.815Z,1520525003.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:24.193Z,1520525004.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:24.225Z,1520525004.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:24.574Z,1520525004.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:24.589Z,1520525004.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:24.978Z,1520525004.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:25.019Z,1520525005.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:25.385Z,1520525005.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:25.400Z,1520525005.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:25.783Z,1520525005.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:25.798Z,1520525005.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:26.197Z,1520525006.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:26.233Z,1520525006.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:26.597Z,1520525006.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:26.632Z,1520525006.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:26.991Z,1520525006.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:27.011Z,1520525007.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:27.388Z,1520525007.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:27.404Z,1520525007.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:27.786Z,1520525007.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:27.806Z,1520525007.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:28.183Z,1520525008.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:28.198Z,1520525008.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:28.591Z,1520525008.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:28.607Z,1520525008.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:28.985Z,1520525008.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:29.001Z,1520525009.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:29.388Z,1520525009.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:29.404Z,1520525009.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:29.793Z,1520525009.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:29.815Z,1520525009.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:30.194Z,1520525010.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:30.215Z,1520525010.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:30.584Z,1520525010.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:30.600Z,1520525010.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:30.991Z,1520525010.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:31.015Z,1520525011.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:31.381Z,1520525011.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:31.402Z,1520525011.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:31.789Z,1520525011.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:31.804Z,1520525011.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:32.197Z,1520525012.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:32.213Z,1520525012.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:32.597Z,1520525012.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:32.612Z,1520525012.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:32.996Z,1520525012.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:33.012Z,1520525013.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:33.390Z,1520525013.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:33.411Z,1520525013.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:33.786Z,1520525013.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:33.807Z,1520525013.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:34.187Z,1520525014.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:34.202Z,1520525014.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:34.581Z,1520525014.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:34.617Z,1520525014.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:34.981Z,1520525014.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:35.000Z,1520525015.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:35.397Z,1520525015.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:35.412Z,1520525015.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:35.797Z,1520525015.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:35.815Z,1520525015.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:36.197Z,1520525016.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:36.212Z,1520525016.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:36.589Z,1520525016.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:36.604Z,1520525016.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:36.991Z,1520525016.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:37.015Z,1520525017.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:37.389Z,1520525017.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:37.404Z,1520525017.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:37.782Z,1520525017.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:37.797Z,1520525017.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:38.197Z,1520525018.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:38.213Z,1520525018.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:38.591Z,1520525018.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:38.614Z,1520525018.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:38.996Z,1520525018.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:39.012Z,1520525019.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:39.384Z,1520525019.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:39.400Z,1520525019.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:39.777Z,1520525019.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:39.800Z,1520525019.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:40.184Z,1520525020.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:40.200Z,1520525020.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:40.592Z,1520525020.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:40.608Z,1520525020.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:40.977Z,1520525020.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:41.001Z,1520525021.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:41.390Z,1520525021.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:41.405Z,1520525021.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:41.797Z,1520525021.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:41.812Z,1520525021.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:42.198Z,1520525022.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:42.215Z,1520525022.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:42.586Z,1520525022.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:42.602Z,1520525022.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:42.990Z,1520525022.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:43.011Z,1520525023.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:43.387Z,1520525023.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:43.403Z,1520525023.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:43.786Z,1520525023.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:43.802Z,1520525023.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:44.196Z,1520525024.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:44.220Z,1520525024.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:44.600Z,1520525024.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:44.615Z,1520525024.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:44.997Z,1520525024.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:45.013Z,1520525025.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:45.385Z,1520525025.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:45.406Z,1520525025.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:45.774Z,1520525025.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:45.811Z,1520525025.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:46.189Z,1520525026.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:46.204Z,1520525026.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:46.593Z,1520525026.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:46.608Z,1520525026.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:46.975Z,1520525026.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:47.007Z,1520525027.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:47.397Z,1520525027.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:47.413Z,1520525027.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:47.797Z,1520525027.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:47.815Z,1520525027.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:48.197Z,1520525028.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:48.212Z,1520525028.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:48.586Z,1520525028.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:48.602Z,1520525028.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:48.975Z,1520525028.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:49.007Z,1520525029.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:49.390Z,1520525029.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:49.405Z,1520525029.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:49.776Z,1520525029.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:49.807Z,1520525029.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:50.200Z,1520525030.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:50.219Z,1520525030.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:50.601Z,1520525030.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:50.617Z,1520525030.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:50.982Z,1520525030.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:51.015Z,1520525031.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:51.383Z,1520525031.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:51.410Z,1520525031.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:51.775Z,1520525031.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:51.807Z,1520525031.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:52.174Z,1520525032.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:52.202Z,1520525032.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:52.582Z,1520525032.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:52.609Z,1520525032.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:52.975Z,1520525032.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:53.003Z,1520525033.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:53.389Z,1520525033.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:53.415Z,1520525033.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:53.790Z,1520525033.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:53.826Z,1520525033.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:54.189Z,1520525034.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:54.224Z,1520525034.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:54.578Z,1520525034.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:54.610Z,1520525034.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:54.978Z,1520525034.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:55.019Z,1520525035.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:55.383Z,1520525035.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:55.398Z,1520525035.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:55.784Z,1520525035.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:55.800Z,1520525035.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:56.199Z,1520525036.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:56.227Z,1520525036.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:56.597Z,1520525036.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:56.628Z,1520525036.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:56.989Z,1520525036.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:57.004Z,1520525037.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:57.388Z,1520525037.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:57.427Z,1520525037.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:57.784Z,1520525037.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:57.799Z,1520525037.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:58.183Z,1520525038.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:58.199Z,1520525038.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:58.586Z,1520525038.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:58.601Z,1520525038.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:58.988Z,1520525038.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:59.003Z,1520525039.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:59.389Z,1520525039.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:59.405Z,1520525039.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:03:59.797Z,1520525039.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:03:59.833Z,1520525039.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:00.190Z,1520525040.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:00.205Z,1520525040.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:00.589Z,1520525040.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:00.606Z,1520525040.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:00.987Z,1520525040.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:01.003Z,1520525041.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:01.389Z,1520525041.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:01.404Z,1520525041.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:01.781Z,1520525041.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:01.798Z,1520525041.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:02.194Z,1520525042.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:02.210Z,1520525042.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:02.594Z,1520525042.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:02.609Z,1520525042.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:02.989Z,1520525042.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:03.005Z,1520525043.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:03.382Z,1520525043.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:03.410Z,1520525043.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:03.787Z,1520525043.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:03.802Z,1520525043.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:04.188Z,1520525044.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:04.203Z,1520525044.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:04.592Z,1520525044.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:04.607Z,1520525044.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:04.987Z,1520525044.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:05.003Z,1520525045.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:05.391Z,1520525045.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:05.407Z,1520525045.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:05.793Z,1520525045.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:05.808Z,1520525045.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:06.193Z,1520525046.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:06.208Z,1520525046.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:06.582Z,1520525046.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:06.598Z,1520525046.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:06.986Z,1520525046.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:07.002Z,1520525047.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:07.387Z,1520525047.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:07.403Z,1520525047.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:07.786Z,1520525047.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:07.801Z,1520525047.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:08.197Z,1520525048.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:08.214Z,1520525048.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:08.593Z,1520525048.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:08.609Z,1520525048.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:08.992Z,1520525048.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:09.008Z,1520525049.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:09.387Z,1520525049.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:09.402Z,1520525049.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:13.230Z,1520525053.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:13.246Z,1520525053.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:13.377Z,1520525053.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:13.431Z,1520525053.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:13.762Z,1520525053.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:13.805Z,1520525053.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:14.156Z,1520525054.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:14.171Z,1520525054.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:14.558Z,1520525054.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:14.574Z,1520525054.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:14.935Z,1520525054.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:14.978Z,1520525054.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:15.328Z,1520525055.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:15.344Z,1520525055.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:15.731Z,1520525055.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:15.752Z,1520525055.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:16.148Z,1520525056.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:16.175Z,1520525056.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:16.534Z,1520525056.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:16.582Z,1520525056.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:16.946Z,1520525056.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:16.975Z,1520525056.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:17.336Z,1520525057.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:17.373Z,1520525057.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:17.724Z,1520525057.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:17.770Z,1520525057.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:18.146Z,1520525058.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:18.178Z,1520525058.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:18.555Z,1520525058.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:18.586Z,1520525058.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:18.934Z,1520525058.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:18.974Z,1520525058.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:19.336Z,1520525059.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:19.377Z,1520525059.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:19.731Z,1520525059.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:19.780Z,1520525059.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:20.142Z,1520525060.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:20.180Z,1520525060.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:20.552Z,1520525060.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:20.576Z,1520525060.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:20.948Z,1520525060.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:20.982Z,1520525060.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:21.328Z,1520525061.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:21.377Z,1520525061.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:21.735Z,1520525061.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:21.774Z,1520525061.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:22.148Z,1520525062.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:22.181Z,1520525062.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:22.536Z,1520525062.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:22.552Z,1520525062.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:22.950Z,1520525062.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:22.982Z,1520525062.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:23.337Z,1520525063.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:23.358Z,1520525063.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:23.724Z,1520525063.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:23.758Z,1520525063.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:24.151Z,1520525064.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:24.183Z,1520525064.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:24.549Z,1520525064.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:24.586Z,1520525064.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:24.938Z,1520525064.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:24.959Z,1520525064.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:25.337Z,1520525065.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:25.357Z,1520525065.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:25.739Z,1520525065.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:25.759Z,1520525065.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:26.136Z,1520525066.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:26.186Z,1520525066.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:26.542Z,1520525066.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:26.562Z,1520525066.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:26.943Z,1520525066.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:26.963Z,1520525066.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:27.342Z,1520525067.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:27.357Z,1520525067.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:27.735Z,1520525067.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:27.782Z,1520525067.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:28.142Z,1520525068.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:28.163Z,1520525068.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:28.548Z,1520525068.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:28.564Z,1520525068.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:28.945Z,1520525068.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:28.960Z,1520525068.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:29.339Z,1520525069.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:29.382Z,1520525069.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:29.729Z,1520525069.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:29.752Z,1520525069.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:30.147Z,1520525070.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:30.190Z,1520525070.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:30.548Z,1520525070.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:30.564Z,1520525070.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:30.946Z,1520525070.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:30.986Z,1520525070.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:31.340Z,1520525071.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:31.361Z,1520525071.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:31.740Z,1520525071.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:31.759Z,1520525071.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:32.149Z,1520525072.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:32.164Z,1520525072.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:32.546Z,1520525072.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:32.586Z,1520525072.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:32.945Z,1520525072.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:32.966Z,1520525072.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:33.343Z,1520525073.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:33.361Z,1520525073.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:33.734Z,1520525073.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:33.756Z,1520525073.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:34.146Z,1520525074.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:34.185Z,1520525074.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:34.546Z,1520525074.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:34.566Z,1520525074.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:34.948Z,1520525074.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:34.963Z,1520525074.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:35.345Z,1520525075.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:35.361Z,1520525075.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:35.726Z,1520525075.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:35.772Z,1520525075.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:36.145Z,1520525076.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:36.165Z,1520525076.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:36.550Z,1520525076.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:36.565Z,1520525076.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:36.947Z,1520525076.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:36.964Z,1520525076.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:37.336Z,1520525077.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:37.372Z,1520525077.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:37.736Z,1520525077.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:37.756Z,1520525077.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:38.147Z,1520525078.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:38.164Z,1520525078.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:38.554Z,1520525078.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:38.570Z,1520525078.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:38.949Z,1520525078.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:38.990Z,1520525078.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:39.340Z,1520525079.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:39.361Z,1520525079.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:39.722Z,1520525079.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:39.763Z,1520525079.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:40.152Z,1520525080.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:40.167Z,1520525080.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:40.542Z,1520525080.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:40.587Z,1520525080.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:40.941Z,1520525080.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:40.962Z,1520525080.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:41.334Z,1520525081.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:41.366Z,1520525081.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:41.722Z,1520525081.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:41.754Z,1520525081.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:42.141Z,1520525082.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:42.191Z,1520525082.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:42.551Z,1520525082.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:42.570Z,1520525082.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:42.951Z,1520525082.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:42.966Z,1520525082.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:43.341Z,1520525083.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:43.356Z,1520525083.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:43.729Z,1520525083.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:43.755Z,1520525083.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:44.150Z,1520525084.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:44.169Z,1520525084.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:44.551Z,1520525084.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:44.567Z,1520525084.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:44.954Z,1520525084.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:44.970Z,1520525084.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:45.341Z,1520525085.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:45.374Z,1520525085.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:45.738Z,1520525085.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:45.759Z,1520525085.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:46.156Z,1520525086.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:46.198Z,1520525086.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:46.548Z,1520525086.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:46.571Z,1520525086.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:46.949Z,1520525086.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:46.982Z,1520525086.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:47.332Z,1520525087.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:47.365Z,1520525087.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:47.726Z,1520525087.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:47.760Z,1520525087.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:48.153Z,1520525088.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:48.169Z,1520525088.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:48.555Z,1520525088.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:48.596Z,1520525088.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:48.941Z,1520525088.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:48.982Z,1520525088.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:49.331Z,1520525089.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:49.382Z,1520525089.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:49.727Z,1520525089.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:49.759Z,1520525089.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:50.151Z,1520525090.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:50.199Z,1520525090.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:50.556Z,1520525090.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:50.595Z,1520525090.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:50.954Z,1520525090.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:50.975Z,1520525090.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:51.358Z,1520525091.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:51.405Z,1520525091.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:51.726Z,1520525091.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:51.751Z,1520525091.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:52.162Z,1520525092.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:52.186Z,1520525092.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:52.556Z,1520525092.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:52.579Z,1520525092.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:52.947Z,1520525092.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:52.980Z,1520525092.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:53.338Z,1520525093.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:53.378Z,1520525093.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:53.733Z,1520525093.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:53.750Z,1520525093.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:54.154Z,1520525094.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:54.178Z,1520525094.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:54.548Z,1520525094.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:54.577Z,1520525094.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:54.950Z,1520525094.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:54.977Z,1520525094.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:55.330Z,1520525095.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:55.370Z,1520525095.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:55.737Z,1520525095.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:55.756Z,1520525095.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:56.150Z,1520525096.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:56.181Z,1520525096.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:56.549Z,1520525096.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:56.578Z,1520525096.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:56.942Z,1520525096.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:56.970Z,1520525096.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:57.337Z,1520525097.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:57.357Z,1520525097.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:57.729Z,1520525097.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:57.754Z,1520525097.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:58.150Z,1520525098.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:58.197Z,1520525098.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:58.551Z,1520525098.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:58.583Z,1520525098.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:58.936Z,1520525098.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:58.982Z,1520525098.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:59.339Z,1520525099.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:59.386Z,1520525099.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:04:59.736Z,1520525099.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:04:59.780Z,1520525099.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:00.151Z,1520525100.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:00.182Z,1520525100.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:00.544Z,1520525100.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:00.563Z,1520525100.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:00.944Z,1520525100.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:00.959Z,1520525100.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:01.337Z,1520525101.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:01.382Z,1520525101.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:01.741Z,1520525101.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:01.761Z,1520525101.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:02.144Z,1520525102.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:02.162Z,1520525102.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:02.545Z,1520525102.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:02.560Z,1520525102.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:02.942Z,1520525102.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:02.982Z,1520525102.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:03.339Z,1520525103.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:03.360Z,1520525103.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:03.738Z,1520525103.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:03.758Z,1520525103.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:04.149Z,1520525104.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:04.170Z,1520525104.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:04.548Z,1520525104.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:04.589Z,1520525104.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:04.949Z,1520525104.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:04.969Z,1520525104.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:05.334Z,1520525105.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:05.383Z,1520525105.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:05.740Z,1520525105.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:05.767Z,1520525105.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:06.141Z,1520525106.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:06.186Z,1520525106.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:06.551Z,1520525106.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:06.569Z,1520525106.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:06.951Z,1520525106.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:06.970Z,1520525106.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:07.345Z,1520525107.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:07.360Z,1520525107.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:07.734Z,1520525107.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:07.772Z,1520525107.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:08.138Z,1520525108.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:08.165Z,1520525108.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:08.549Z,1520525108.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:08.565Z,1520525108.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:08.954Z,1520525108.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:08.969Z,1520525108.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:09.341Z,1520525109.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:09.386Z,1520525109.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:09.740Z,1520525109.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:09.761Z,1520525109.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:12.845Z,1520525112.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:12.861Z,1520525112.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:12.971Z,1520525112.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:13.000Z,1520525113.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:13.353Z,1520525113.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:13.379Z,1520525113.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:13.752Z,1520525113.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:13.776Z,1520525113.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:14.153Z,1520525114.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:14.195Z,1520525114.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:14.552Z,1520525114.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:14.599Z,1520525114.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:14.936Z,1520525114.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:14.969Z,1520525114.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:15.363Z,1520525115.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:15.383Z,1520525115.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:15.765Z,1520525115.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:15.782Z,1520525115.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:16.163Z,1520525116.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:16.178Z,1520525116.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:16.550Z,1520525116.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:16.571Z,1520525116.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:16.951Z,1520525116.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:16.971Z,1520525116.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:17.331Z,1520525117.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:17.375Z,1520525117.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:17.747Z,1520525117.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:17.767Z,1520525117.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:18.160Z,1520525118.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:18.190Z,1520525118.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:18.557Z,1520525118.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:18.573Z,1520525118.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:18.942Z,1520525118.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:18.986Z,1520525118.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:19.340Z,1520525119.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:19.371Z,1520525119.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:19.735Z,1520525119.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:19.775Z,1520525119.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:20.161Z,1520525120.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:20.212Z,1520525120.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:20.558Z,1520525120.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:20.577Z,1520525120.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:20.964Z,1520525120.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:20.978Z,1520525120.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:21.341Z,1520525121.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:21.378Z,1520525121.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:21.741Z,1520525121.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:21.768Z,1520525121.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:22.149Z,1520525122.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:22.183Z,1520525122.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:22.561Z,1520525122.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:22.594Z,1520525122.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:22.957Z,1520525122.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:22.976Z,1520525122.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:23.339Z,1520525123.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:23.365Z,1520525123.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:23.739Z,1520525123.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:23.782Z,1520525123.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:24.158Z,1520525124.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:24.187Z,1520525124.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:24.564Z,1520525124.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:24.579Z,1520525124.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:24.960Z,1520525124.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:24.975Z,1520525124.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:25.336Z,1520525125.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:25.374Z,1520525125.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:25.735Z,1520525125.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:25.770Z,1520525125.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:26.152Z,1520525126.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:26.179Z,1520525126.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:26.550Z,1520525126.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:26.582Z,1520525126.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:26.950Z,1520525126.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:26.990Z,1520525126.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:27.340Z,1520525127.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:27.382Z,1520525127.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:27.739Z,1520525127.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:27.774Z,1520525127.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:28.148Z,1520525128.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:28.183Z,1520525128.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:28.565Z,1520525128.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:28.582Z,1520525128.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:28.946Z,1520525128.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:28.978Z,1520525128.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:29.335Z,1520525129.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:29.371Z,1520525129.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:29.742Z,1520525129.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:29.771Z,1520525129.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:30.146Z,1520525130.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:30.178Z,1520525130.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:30.550Z,1520525130.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:30.581Z,1520525130.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:30.949Z,1520525130.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:30.975Z,1520525130.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:31.339Z,1520525131.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:31.370Z,1520525131.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:31.735Z,1520525131.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:31.779Z,1520525131.779 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:31.779Z,1520525131.779 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 167
2018-03-08T16:05:31.779Z,1520525131.779 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T16:05:31.781Z,1520525131.781 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:31.781Z,1520525131.781 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 167
2018-03-08T16:05:31.781Z,1520525131.781 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T16:05:31.783Z,1520525131.783 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:31.783Z,1520525131.783 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 167
2018-03-08T16:05:31.783Z,1520525131.783 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T16:05:31.809Z,1520525131.809 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T16:05:31.809Z,1520525131.809 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T16:05:31.810Z,1520525131.810 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T16:05:32.151Z,1520525132.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:32.191Z,1520525132.191 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T16:05:32.191Z,1520525132.191 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 167
2018-03-08T16:05:32.192Z,1520525132.192 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T16:05:32.192Z,1520525132.192 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 167
2018-03-08T16:05:32.193Z,1520525132.193 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T16:05:32.193Z,1520525132.193 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 167
2018-03-08T16:05:32.555Z,1520525132.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:32.580Z,1520525132.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T16:05:32.581Z,1520525132.581 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:05:32.581Z,1520525132.581 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:05:32.581Z,1520525132.581 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T16:05:32.582Z,1520525132.582 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:05:32.582Z,1520525132.582 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:05:32.582Z,1520525132.582 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T16:05:32.583Z,1520525132.583 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:05:32.583Z,1520525132.583 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:05:32.947Z,1520525132.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:32.975Z,1520525132.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T16:05:32.976Z,1520525132.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:33.345Z,1520525133.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:33.386Z,1520525133.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T16:05:33.387Z,1520525133.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:33.741Z,1520525133.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:33.767Z,1520525133.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T16:05:33.768Z,1520525133.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:34.157Z,1520525134.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:34.171Z,1520525134.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T16:05:34.172Z,1520525134.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:34.557Z,1520525134.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:34.572Z,1520525134.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T16:05:34.573Z,1520525134.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:34.953Z,1520525134.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:34.992Z,1520525134.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T16:05:34.993Z,1520525134.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:35.345Z,1520525135.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:35.371Z,1520525135.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T16:05:35.372Z,1520525135.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:35.750Z,1520525135.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:35.795Z,1520525135.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T16:05:35.796Z,1520525135.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:36.156Z,1520525136.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:36.171Z,1520525136.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T16:05:36.172Z,1520525136.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:36.554Z,1520525136.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:36.594Z,1520525136.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T16:05:36.595Z,1520525136.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:36.955Z,1520525136.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:36.997Z,1520525136.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T16:05:36.998Z,1520525136.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:37.346Z,1520525137.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:37.374Z,1520525137.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T16:05:37.375Z,1520525137.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:37.751Z,1520525137.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:37.765Z,1520525137.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T16:05:37.766Z,1520525137.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:38.156Z,1520525138.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:38.198Z,1520525138.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T16:05:38.199Z,1520525138.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:38.559Z,1520525138.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:38.601Z,1520525138.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T16:05:38.602Z,1520525138.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:38.951Z,1520525138.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:38.976Z,1520525138.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T16:05:38.977Z,1520525138.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:39.353Z,1520525139.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:39.369Z,1520525139.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T16:05:39.370Z,1520525139.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:39.746Z,1520525139.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:39.778Z,1520525139.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T16:05:39.779Z,1520525139.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:40.159Z,1520525140.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:40.178Z,1520525140.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T16:05:40.179Z,1520525140.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:40.559Z,1520525140.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:40.574Z,1520525140.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T16:05:40.575Z,1520525140.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:40.958Z,1520525140.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:40.974Z,1520525140.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T16:05:40.974Z,1520525140.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:41.349Z,1520525141.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:41.375Z,1520525141.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T16:05:41.376Z,1520525141.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:41.745Z,1520525141.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:41.765Z,1520525141.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T16:05:41.766Z,1520525141.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:42.158Z,1520525142.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:42.178Z,1520525142.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T16:05:42.179Z,1520525142.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:42.559Z,1520525142.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:42.574Z,1520525142.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T16:05:42.575Z,1520525142.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:42.956Z,1520525142.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:43.001Z,1520525143.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T16:05:43.002Z,1520525143.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:43.348Z,1520525143.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:43.398Z,1520525143.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T16:05:43.399Z,1520525143.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:43.752Z,1520525143.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:43.766Z,1520525143.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T16:05:43.767Z,1520525143.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:44.159Z,1520525144.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:44.174Z,1520525144.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T16:05:44.175Z,1520525144.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:44.556Z,1520525144.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:44.601Z,1520525144.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T16:05:44.602Z,1520525144.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:44.956Z,1520525144.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:44.983Z,1520525144.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T16:05:44.984Z,1520525144.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:45.352Z,1520525145.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:45.367Z,1520525145.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T16:05:45.368Z,1520525145.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:45.739Z,1520525145.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:45.770Z,1520525145.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T16:05:45.771Z,1520525145.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:46.161Z,1520525146.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:46.179Z,1520525146.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T16:05:46.180Z,1520525146.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:46.562Z,1520525146.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:46.582Z,1520525146.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T16:05:46.583Z,1520525146.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:46.959Z,1520525146.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:46.978Z,1520525146.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T16:05:46.979Z,1520525146.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:47.351Z,1520525147.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:47.366Z,1520525147.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T16:05:47.367Z,1520525147.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:47.739Z,1520525147.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:47.782Z,1520525147.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T16:05:47.783Z,1520525147.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:48.162Z,1520525148.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:48.182Z,1520525148.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T16:05:48.183Z,1520525148.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:48.565Z,1520525148.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:48.580Z,1520525148.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T16:05:48.581Z,1520525148.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:48.961Z,1520525148.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:48.982Z,1520525148.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T16:05:48.983Z,1520525148.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:49.340Z,1520525149.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:49.382Z,1520525149.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T16:05:49.383Z,1520525149.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:49.738Z,1520525149.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:49.771Z,1520525149.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T16:05:49.772Z,1520525149.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:50.161Z,1520525150.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:50.179Z,1520525150.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T16:05:50.180Z,1520525150.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:50.562Z,1520525150.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:50.582Z,1520525150.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T16:05:50.583Z,1520525150.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:50.963Z,1520525150.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:50.980Z,1520525150.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T16:05:50.981Z,1520525150.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:51.333Z,1520525151.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:51.366Z,1520525151.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T16:05:51.367Z,1520525151.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:51.736Z,1520525151.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:51.774Z,1520525151.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T16:05:51.775Z,1520525151.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:52.162Z,1520525152.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:52.177Z,1520525152.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:52.547Z,1520525152.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:52.590Z,1520525152.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:52.963Z,1520525152.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:53.007Z,1520525153.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:53.331Z,1520525153.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:53.369Z,1520525153.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:53.729Z,1520525153.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:53.773Z,1520525153.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:54.146Z,1520525154.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:54.190Z,1520525154.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:54.570Z,1520525154.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:54.595Z,1520525154.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:54.943Z,1520525154.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:54.985Z,1520525154.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:55.343Z,1520525155.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:55.371Z,1520525155.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:55.731Z,1520525155.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:55.776Z,1520525155.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:56.158Z,1520525156.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:56.195Z,1520525156.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:56.563Z,1520525156.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:56.587Z,1520525156.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:56.960Z,1520525156.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:56.980Z,1520525156.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:57.340Z,1520525157.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:57.373Z,1520525157.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:57.735Z,1520525157.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:57.768Z,1520525157.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:58.152Z,1520525158.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:58.179Z,1520525158.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:58.548Z,1520525158.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:58.582Z,1520525158.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:58.950Z,1520525158.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:58.981Z,1520525158.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:59.336Z,1520525159.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:59.380Z,1520525159.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:05:59.732Z,1520525159.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:05:59.766Z,1520525159.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:00.152Z,1520525160.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:00.178Z,1520525160.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:00.549Z,1520525160.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:00.582Z,1520525160.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:00.946Z,1520525160.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:00.977Z,1520525160.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:01.346Z,1520525161.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:01.379Z,1520525161.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:01.738Z,1520525161.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:01.753Z,1520525161.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:02.153Z,1520525162.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:02.203Z,1520525162.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:02.560Z,1520525162.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:02.591Z,1520525162.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:02.952Z,1520525162.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:02.979Z,1520525162.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:03.344Z,1520525163.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:03.359Z,1520525163.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:03.744Z,1520525163.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:03.790Z,1520525163.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:04.159Z,1520525164.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:04.182Z,1520525164.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:04.548Z,1520525164.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:04.582Z,1520525164.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:04.951Z,1520525164.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:04.981Z,1520525164.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:05.345Z,1520525165.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:05.381Z,1520525165.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:05.734Z,1520525165.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:05.764Z,1520525165.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:06.159Z,1520525166.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:06.187Z,1520525166.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:06.551Z,1520525166.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:06.566Z,1520525166.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:06.944Z,1520525166.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:06.985Z,1520525166.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:07.343Z,1520525167.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:07.363Z,1520525167.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:07.746Z,1520525167.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:07.762Z,1520525167.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:08.157Z,1520525168.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:08.187Z,1520525168.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:08.557Z,1520525168.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:08.606Z,1520525168.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:08.609Z,1520525168.609 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T16:06:08.609Z,1520525168.609 [Default:CheckIn:C.Wait] Stopped
2018-03-08T16:06:08.609Z,1520525168.609 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T16:06:08.609Z,1520525168.609 [Default:CheckIn:D] Running Loop=1
2018-03-08T16:06:08.959Z,1520525168.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:08.987Z,1520525168.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:08.990Z,1520525168.990 [Default:CheckIn:D] Stopped
2018-03-08T16:06:08.990Z,1520525168.990 [Default:CheckIn:E] Running Loop=1
2018-03-08T16:06:09.347Z,1520525169.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:09.364Z,1520525169.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:09.368Z,1520525169.368 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 500.403092 min 
2018-03-08T16:06:09.368Z,1520525169.368 [Default:CheckIn:E] Stopped
2018-03-08T16:06:09.368Z,1520525169.368 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T16:06:09.368Z,1520525169.368 [Default:CheckIn] Stopped
2018-03-08T16:06:09.388Z,1520525169.388 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T16:06:09.389Z,1520525169.389 [Default:CheckIn](INFO): Running loop #49
2018-03-08T16:06:09.389Z,1520525169.389 [Default:CheckIn] Running Loop=49
2018-03-08T16:06:09.389Z,1520525169.389 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T16:06:09.389Z,1520525169.389 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T16:06:09.742Z,1520525169.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:09.766Z,1520525169.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:12.852Z,1520525172.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:12.867Z,1520525172.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:12.969Z,1520525172.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:13.005Z,1520525173.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:13.357Z,1520525173.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:13.377Z,1520525173.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:13.753Z,1520525173.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:13.770Z,1520525173.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:14.159Z,1520525174.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:14.174Z,1520525174.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:14.555Z,1520525174.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:14.571Z,1520525174.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:14.947Z,1520525174.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:14.978Z,1520525174.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:15.363Z,1520525175.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:15.382Z,1520525175.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:15.764Z,1520525175.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:15.780Z,1520525175.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:16.162Z,1520525176.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:16.178Z,1520525176.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:16.545Z,1520525176.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:16.582Z,1520525176.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:16.951Z,1520525176.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:16.970Z,1520525176.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:17.335Z,1520525177.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:17.375Z,1520525177.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:17.748Z,1520525177.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:17.763Z,1520525177.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:18.154Z,1520525178.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:18.197Z,1520525178.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:18.562Z,1520525178.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:18.587Z,1520525178.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:18.957Z,1520525178.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:18.984Z,1520525178.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:19.355Z,1520525179.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:19.371Z,1520525179.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:19.735Z,1520525179.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:19.773Z,1520525179.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:20.164Z,1520525180.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:20.209Z,1520525180.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:20.564Z,1520525180.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:20.580Z,1520525180.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:20.963Z,1520525180.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:20.978Z,1520525180.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:21.352Z,1520525181.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:21.386Z,1520525181.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:21.754Z,1520525181.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:21.802Z,1520525181.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:22.166Z,1520525182.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:22.181Z,1520525182.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:22.555Z,1520525182.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:22.578Z,1520525182.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:22.958Z,1520525182.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:22.978Z,1520525182.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:23.343Z,1520525183.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:23.375Z,1520525183.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:23.732Z,1520525183.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:23.768Z,1520525183.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:24.162Z,1520525184.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:24.194Z,1520525184.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:24.569Z,1520525184.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:24.584Z,1520525184.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:24.954Z,1520525184.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:24.981Z,1520525184.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:25.341Z,1520525185.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:25.371Z,1520525185.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:25.742Z,1520525185.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:25.769Z,1520525185.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:26.155Z,1520525186.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:26.199Z,1520525186.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:26.565Z,1520525186.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:26.580Z,1520525186.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:26.964Z,1520525186.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:26.986Z,1520525186.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:27.351Z,1520525187.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:27.376Z,1520525187.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:27.751Z,1520525187.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:27.781Z,1520525187.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:28.167Z,1520525188.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:28.182Z,1520525188.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:28.549Z,1520525188.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:28.571Z,1520525188.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:28.971Z,1520525188.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:28.987Z,1520525188.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:29.347Z,1520525189.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:29.378Z,1520525189.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:29.739Z,1520525189.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:29.768Z,1520525189.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:30.162Z,1520525190.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:30.194Z,1520525190.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:30.557Z,1520525190.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:30.572Z,1520525190.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:30.948Z,1520525190.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:30.980Z,1520525190.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:31.350Z,1520525191.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:31.369Z,1520525191.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:31.751Z,1520525191.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:31.766Z,1520525191.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:32.153Z,1520525192.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:32.171Z,1520525192.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:32.558Z,1520525192.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:32.595Z,1520525192.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:32.955Z,1520525192.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:32.978Z,1520525192.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:33.349Z,1520525193.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:33.366Z,1520525193.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:33.754Z,1520525193.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:33.774Z,1520525193.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:34.153Z,1520525194.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:34.179Z,1520525194.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:34.551Z,1520525194.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:34.591Z,1520525194.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:34.960Z,1520525194.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:34.979Z,1520525194.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:35.356Z,1520525195.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:35.371Z,1520525195.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:35.743Z,1520525195.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:35.778Z,1520525195.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:36.159Z,1520525196.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:36.175Z,1520525196.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:36.560Z,1520525196.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:36.575Z,1520525196.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:36.950Z,1520525196.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:36.966Z,1520525196.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:37.340Z,1520525197.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:37.386Z,1520525197.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:37.754Z,1520525197.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:37.783Z,1520525197.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:38.166Z,1520525198.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:38.181Z,1520525198.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:38.562Z,1520525198.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:38.582Z,1520525198.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:38.963Z,1520525198.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:38.981Z,1520525198.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:39.337Z,1520525199.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:39.369Z,1520525199.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:39.739Z,1520525199.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:39.779Z,1520525199.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:40.163Z,1520525200.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:40.179Z,1520525200.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:40.549Z,1520525200.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:40.590Z,1520525200.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:40.966Z,1520525200.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:41.003Z,1520525201.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:41.341Z,1520525201.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:41.377Z,1520525201.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:41.735Z,1520525201.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:41.774Z,1520525201.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:42.165Z,1520525202.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:42.183Z,1520525202.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:42.570Z,1520525202.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:42.585Z,1520525202.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:42.951Z,1520525202.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:42.983Z,1520525202.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:43.347Z,1520525203.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:43.373Z,1520525203.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:43.735Z,1520525203.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:43.774Z,1520525203.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:44.167Z,1520525204.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:44.194Z,1520525204.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:44.564Z,1520525204.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:44.586Z,1520525204.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:44.966Z,1520525204.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:44.981Z,1520525204.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:45.340Z,1520525205.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:45.372Z,1520525205.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:45.738Z,1520525205.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:45.770Z,1520525205.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:46.165Z,1520525206.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:46.180Z,1520525206.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:46.551Z,1520525206.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:46.586Z,1520525206.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:46.966Z,1520525206.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:46.983Z,1520525206.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:47.335Z,1520525207.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:47.378Z,1520525207.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:47.732Z,1520525207.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:47.765Z,1520525207.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:48.154Z,1520525208.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:48.181Z,1520525208.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:48.553Z,1520525208.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:48.584Z,1520525208.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:48.951Z,1520525208.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:48.989Z,1520525208.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:49.346Z,1520525209.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:49.382Z,1520525209.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:49.744Z,1520525209.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:49.759Z,1520525209.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:50.153Z,1520525210.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:50.190Z,1520525210.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:50.572Z,1520525210.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:50.594Z,1520525210.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:50.955Z,1520525210.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:50.983Z,1520525210.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:51.347Z,1520525211.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:51.378Z,1520525211.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:51.748Z,1520525211.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:51.791Z,1520525211.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:52.160Z,1520525212.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:52.190Z,1520525212.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:52.548Z,1520525212.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:52.564Z,1520525212.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:52.961Z,1520525212.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:52.985Z,1520525212.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:53.352Z,1520525213.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:53.385Z,1520525213.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:53.737Z,1520525213.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:53.765Z,1520525213.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:54.159Z,1520525214.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:54.189Z,1520525214.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:54.561Z,1520525214.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:54.586Z,1520525214.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:54.946Z,1520525214.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:54.986Z,1520525214.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:55.345Z,1520525215.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:55.365Z,1520525215.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:55.749Z,1520525215.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:55.765Z,1520525215.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:56.161Z,1520525216.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:56.199Z,1520525216.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:56.563Z,1520525216.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:56.596Z,1520525216.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:56.964Z,1520525216.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:56.995Z,1520525216.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:57.351Z,1520525217.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:57.371Z,1520525217.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:57.752Z,1520525217.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:57.767Z,1520525217.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:58.162Z,1520525218.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:58.196Z,1520525218.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:58.548Z,1520525218.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:58.569Z,1520525218.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:58.962Z,1520525218.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:58.994Z,1520525218.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:59.350Z,1520525219.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:59.378Z,1520525219.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:06:59.751Z,1520525219.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:06:59.791Z,1520525219.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:00.155Z,1520525220.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:00.173Z,1520525220.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:00.555Z,1520525220.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:00.571Z,1520525220.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:00.958Z,1520525220.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:00.975Z,1520525220.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:01.352Z,1520525221.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:01.394Z,1520525221.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:01.748Z,1520525221.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:01.794Z,1520525221.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:02.156Z,1520525222.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:02.172Z,1520525222.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:02.558Z,1520525222.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:02.573Z,1520525222.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:02.953Z,1520525222.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:02.993Z,1520525222.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:03.353Z,1520525223.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:03.398Z,1520525223.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:03.753Z,1520525223.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:03.768Z,1520525223.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:04.159Z,1520525224.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:04.175Z,1520525224.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:04.557Z,1520525224.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:04.598Z,1520525224.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:04.955Z,1520525224.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:04.998Z,1520525224.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:05.355Z,1520525225.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:05.371Z,1520525225.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:05.755Z,1520525225.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:05.774Z,1520525225.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:06.154Z,1520525226.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:06.195Z,1520525226.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:06.556Z,1520525226.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:06.598Z,1520525226.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:06.957Z,1520525226.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:06.972Z,1520525226.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:07.352Z,1520525227.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:07.375Z,1520525227.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:07.753Z,1520525227.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:07.792Z,1520525227.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:08.162Z,1520525228.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:08.214Z,1520525228.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:08.562Z,1520525228.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:08.599Z,1520525228.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:08.963Z,1520525228.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:08.978Z,1520525228.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:09.353Z,1520525229.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:09.392Z,1520525229.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:09.757Z,1520525229.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:09.798Z,1520525229.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:12.861Z,1520525232.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:12.876Z,1520525232.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:12.994Z,1520525232.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:13.014Z,1520525233.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:13.369Z,1520525233.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:13.400Z,1520525233.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:13.756Z,1520525233.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:13.771Z,1520525233.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:14.153Z,1520525234.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:14.193Z,1520525234.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:14.555Z,1520525234.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:14.598Z,1520525234.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:14.960Z,1520525234.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:14.976Z,1520525234.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:15.358Z,1520525235.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:15.383Z,1520525235.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:15.767Z,1520525235.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:15.784Z,1520525235.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:16.170Z,1520525236.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:16.185Z,1520525236.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:16.561Z,1520525236.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:16.577Z,1520525236.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:16.962Z,1520525236.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:16.977Z,1520525236.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:17.356Z,1520525237.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:17.387Z,1520525237.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:17.765Z,1520525237.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:17.803Z,1520525237.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:18.170Z,1520525238.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:18.185Z,1520525238.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:18.569Z,1520525238.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:18.584Z,1520525238.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:18.964Z,1520525238.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:18.986Z,1520525238.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:19.364Z,1520525239.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:19.379Z,1520525239.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:19.764Z,1520525239.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:19.779Z,1520525239.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:20.168Z,1520525240.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:20.184Z,1520525240.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:20.571Z,1520525240.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:20.586Z,1520525240.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:20.973Z,1520525240.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:20.988Z,1520525240.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:21.362Z,1520525241.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:21.382Z,1520525241.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:21.762Z,1520525241.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:21.778Z,1520525241.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:22.143Z,1520525242.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:22.203Z,1520525242.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:22.560Z,1520525242.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:22.601Z,1520525242.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:22.962Z,1520525242.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:22.977Z,1520525242.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:23.369Z,1520525243.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:23.384Z,1520525243.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:23.767Z,1520525243.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:23.783Z,1520525243.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:24.172Z,1520525244.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:24.187Z,1520525244.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:24.564Z,1520525244.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:24.579Z,1520525244.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:24.962Z,1520525244.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:24.977Z,1520525244.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:25.357Z,1520525245.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:25.406Z,1520525245.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:25.764Z,1520525245.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:25.792Z,1520525245.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:26.170Z,1520525246.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:26.190Z,1520525246.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:26.569Z,1520525246.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:26.584Z,1520525246.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:26.970Z,1520525246.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:26.985Z,1520525246.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:27.348Z,1520525247.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:27.380Z,1520525247.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:27.750Z,1520525247.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:27.776Z,1520525247.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:28.157Z,1520525248.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:28.188Z,1520525248.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:28.577Z,1520525248.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:28.593Z,1520525248.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:28.977Z,1520525248.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:28.992Z,1520525248.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:29.365Z,1520525249.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:29.380Z,1520525249.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:29.762Z,1520525249.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:29.777Z,1520525249.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:30.170Z,1520525250.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:30.190Z,1520525250.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:30.577Z,1520525250.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:30.591Z,1520525250.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:30.973Z,1520525250.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:30.988Z,1520525250.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:31.361Z,1520525251.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:31.378Z,1520525251.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:31.743Z,1520525251.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:31.778Z,1520525251.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:32.174Z,1520525252.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:32.189Z,1520525252.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:32.573Z,1520525252.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:32.588Z,1520525252.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:32.963Z,1520525252.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:32.982Z,1520525252.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:33.352Z,1520525253.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:33.387Z,1520525253.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:33.747Z,1520525253.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:33.780Z,1520525253.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:34.175Z,1520525254.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:34.190Z,1520525254.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:34.573Z,1520525254.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:34.594Z,1520525254.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:34.974Z,1520525254.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:34.989Z,1520525254.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:35.347Z,1520525255.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:35.384Z,1520525255.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:35.753Z,1520525255.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:35.786Z,1520525255.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:36.171Z,1520525256.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:36.186Z,1520525256.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:36.573Z,1520525256.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:36.598Z,1520525256.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:36.977Z,1520525256.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:36.992Z,1520525256.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:37.350Z,1520525257.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:37.374Z,1520525257.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:37.754Z,1520525257.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:37.780Z,1520525257.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:38.178Z,1520525258.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:38.197Z,1520525258.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:38.576Z,1520525258.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:38.591Z,1520525258.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:38.975Z,1520525258.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:38.990Z,1520525258.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:39.354Z,1520525259.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:39.381Z,1520525259.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:39.747Z,1520525259.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:39.790Z,1520525259.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:40.177Z,1520525260.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:40.199Z,1520525260.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:40.571Z,1520525260.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:40.587Z,1520525260.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:40.965Z,1520525260.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:40.991Z,1520525260.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:41.347Z,1520525261.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:41.387Z,1520525261.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:41.752Z,1520525261.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:41.782Z,1520525261.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:42.159Z,1520525262.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:42.190Z,1520525262.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:42.570Z,1520525262.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:42.585Z,1520525262.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:42.978Z,1520525262.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:42.998Z,1520525262.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:43.351Z,1520525263.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:43.381Z,1520525263.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:43.746Z,1520525263.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:43.775Z,1520525263.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:44.174Z,1520525264.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:44.189Z,1520525264.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:44.562Z,1520525264.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:44.599Z,1520525264.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:44.968Z,1520525264.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:44.999Z,1520525264.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:45.352Z,1520525265.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:45.368Z,1520525265.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:45.754Z,1520525265.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:45.770Z,1520525265.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:46.167Z,1520525266.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:46.194Z,1520525266.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:46.567Z,1520525266.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:46.595Z,1520525266.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:46.973Z,1520525266.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:47.002Z,1520525267.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:47.359Z,1520525267.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:47.374Z,1520525267.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:47.753Z,1520525267.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:47.793Z,1520525267.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:48.154Z,1520525268.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:48.210Z,1520525268.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:48.559Z,1520525268.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:48.573Z,1520525268.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:48.950Z,1520525268.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:48.974Z,1520525268.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:49.363Z,1520525269.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:49.381Z,1520525269.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:49.768Z,1520525269.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:49.783Z,1520525269.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:50.180Z,1520525270.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:50.248Z,1520525270.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:50.566Z,1520525270.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:50.587Z,1520525270.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:50.962Z,1520525270.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:50.981Z,1520525270.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:51.364Z,1520525271.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:51.380Z,1520525271.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:51.763Z,1520525271.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:51.779Z,1520525271.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:52.162Z,1520525272.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:52.178Z,1520525272.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:52.568Z,1520525272.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:52.586Z,1520525272.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:52.967Z,1520525272.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:52.982Z,1520525272.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:53.361Z,1520525273.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:53.376Z,1520525273.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:53.753Z,1520525273.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:53.773Z,1520525273.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:54.166Z,1520525274.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:54.190Z,1520525274.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:54.573Z,1520525274.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:54.588Z,1520525274.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:54.962Z,1520525274.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:54.990Z,1520525274.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:55.364Z,1520525275.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:55.387Z,1520525275.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:55.760Z,1520525275.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:55.779Z,1520525275.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:56.177Z,1520525276.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:56.193Z,1520525276.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:56.572Z,1520525276.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:56.588Z,1520525276.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:56.973Z,1520525276.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:56.987Z,1520525276.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:57.345Z,1520525277.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:57.391Z,1520525277.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:57.763Z,1520525277.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:57.807Z,1520525277.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:58.163Z,1520525278.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:58.179Z,1520525278.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:58.562Z,1520525278.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:58.577Z,1520525278.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:58.947Z,1520525278.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:58.991Z,1520525278.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:59.370Z,1520525279.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:59.407Z,1520525279.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:07:59.767Z,1520525279.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:07:59.783Z,1520525279.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:00.169Z,1520525280.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:00.196Z,1520525280.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:00.560Z,1520525280.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:00.579Z,1520525280.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:00.947Z,1520525280.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:00.978Z,1520525280.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:01.357Z,1520525281.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:01.377Z,1520525281.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:01.769Z,1520525281.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:01.803Z,1520525281.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:02.163Z,1520525282.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:02.187Z,1520525282.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:02.568Z,1520525282.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:02.643Z,1520525282.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:02.965Z,1520525282.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:02.980Z,1520525282.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:03.344Z,1520525283.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:03.359Z,1520525283.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:03.747Z,1520525283.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:03.778Z,1520525283.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:04.167Z,1520525284.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:04.183Z,1520525284.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:04.560Z,1520525284.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:04.575Z,1520525284.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:04.965Z,1520525284.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:04.980Z,1520525284.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:05.349Z,1520525285.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:05.401Z,1520525285.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:05.747Z,1520525285.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:05.778Z,1520525285.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:06.159Z,1520525286.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:06.192Z,1520525286.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:06.570Z,1520525286.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:06.586Z,1520525286.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:06.958Z,1520525286.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:06.999Z,1520525286.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:07.359Z,1520525287.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:07.378Z,1520525287.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:07.755Z,1520525287.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:07.770Z,1520525287.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:08.173Z,1520525288.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:08.196Z,1520525288.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:08.567Z,1520525288.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:08.596Z,1520525288.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:08.972Z,1520525288.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:09.006Z,1520525289.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:09.361Z,1520525289.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:09.376Z,1520525289.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:09.760Z,1520525289.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:09.775Z,1520525289.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:12.873Z,1520525292.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:12.904Z,1520525292.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:13.004Z,1520525293.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:13.019Z,1520525293.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:13.376Z,1520525293.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:13.403Z,1520525293.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:13.760Z,1520525293.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:13.775Z,1520525293.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:14.164Z,1520525294.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:14.180Z,1520525294.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:14.559Z,1520525294.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:14.587Z,1520525294.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:14.960Z,1520525294.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:14.979Z,1520525294.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:15.367Z,1520525295.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:15.387Z,1520525295.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:15.766Z,1520525295.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:15.790Z,1520525295.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:16.173Z,1520525296.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:16.188Z,1520525296.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:16.545Z,1520525296.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:16.578Z,1520525296.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:16.958Z,1520525296.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:16.981Z,1520525296.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:17.363Z,1520525297.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:17.378Z,1520525297.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:17.760Z,1520525297.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:17.783Z,1520525297.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:18.174Z,1520525298.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:18.222Z,1520525298.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:18.575Z,1520525298.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:18.590Z,1520525298.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:18.965Z,1520525298.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:18.989Z,1520525298.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:19.354Z,1520525299.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:19.387Z,1520525299.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:19.751Z,1520525299.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:19.791Z,1520525299.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:20.174Z,1520525300.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:20.190Z,1520525300.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:20.573Z,1520525300.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:20.590Z,1520525300.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:20.969Z,1520525300.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:20.990Z,1520525300.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:21.352Z,1520525301.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:21.391Z,1520525301.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:21.752Z,1520525301.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:21.791Z,1520525301.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:22.174Z,1520525302.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:22.190Z,1520525302.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:22.573Z,1520525302.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:22.592Z,1520525302.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:22.973Z,1520525302.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:22.996Z,1520525302.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:23.354Z,1520525303.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:23.386Z,1520525303.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:23.751Z,1520525303.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:23.786Z,1520525303.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:24.173Z,1520525304.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:24.195Z,1520525304.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:24.577Z,1520525304.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:24.592Z,1520525304.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:24.964Z,1520525304.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:24.999Z,1520525304.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:25.354Z,1520525305.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:25.392Z,1520525305.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:25.754Z,1520525305.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:25.787Z,1520525305.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:26.178Z,1520525306.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:26.193Z,1520525306.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:26.582Z,1520525306.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:26.602Z,1520525306.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:26.975Z,1520525306.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:26.990Z,1520525306.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:27.359Z,1520525307.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:27.387Z,1520525307.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:27.758Z,1520525307.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:27.790Z,1520525307.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:28.173Z,1520525308.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:28.196Z,1520525308.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:28.562Z,1520525308.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:28.596Z,1520525308.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:28.973Z,1520525308.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:28.993Z,1520525308.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:29.353Z,1520525309.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:29.383Z,1520525309.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:29.750Z,1520525309.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:29.796Z,1520525309.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:30.167Z,1520525310.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:30.207Z,1520525310.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:30.566Z,1520525310.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:30.593Z,1520525310.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:30.963Z,1520525310.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:31.007Z,1520525311.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:31.363Z,1520525311.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:31.393Z,1520525311.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:31.760Z,1520525311.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:31.784Z,1520525311.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:32.170Z,1520525312.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:32.197Z,1520525312.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:32.584Z,1520525312.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:32.606Z,1520525312.606 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:32.607Z,1520525312.607 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 168
2018-03-08T16:08:32.607Z,1520525312.607 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T16:08:32.609Z,1520525312.609 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:32.609Z,1520525312.609 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 168
2018-03-08T16:08:32.609Z,1520525312.609 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T16:08:32.610Z,1520525312.610 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:32.610Z,1520525312.610 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 168
2018-03-08T16:08:32.611Z,1520525312.611 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T16:08:32.622Z,1520525312.622 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T16:08:32.622Z,1520525312.622 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T16:08:32.623Z,1520525312.623 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T16:08:32.984Z,1520525312.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:33.010Z,1520525313.010 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T16:08:33.010Z,1520525313.010 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 168
2018-03-08T16:08:33.010Z,1520525313.010 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T16:08:33.010Z,1520525313.010 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 168
2018-03-08T16:08:33.011Z,1520525313.011 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T16:08:33.011Z,1520525313.011 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 168
2018-03-08T16:08:33.354Z,1520525313.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:33.373Z,1520525313.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T16:08:33.374Z,1520525313.374 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:08:33.374Z,1520525313.374 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:08:33.375Z,1520525313.375 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T16:08:33.375Z,1520525313.375 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:08:33.375Z,1520525313.375 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:08:33.376Z,1520525313.376 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T16:08:33.376Z,1520525313.376 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:08:33.401Z,1520525313.401 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:08:33.759Z,1520525313.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:33.786Z,1520525313.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T16:08:33.787Z,1520525313.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:34.156Z,1520525314.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:34.183Z,1520525314.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T16:08:34.184Z,1520525314.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:34.564Z,1520525314.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:34.609Z,1520525314.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T16:08:34.610Z,1520525314.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:34.959Z,1520525314.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:34.979Z,1520525314.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T16:08:34.980Z,1520525314.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:35.372Z,1520525315.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:35.387Z,1520525315.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T16:08:35.388Z,1520525315.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:35.770Z,1520525315.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:35.798Z,1520525315.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T16:08:35.799Z,1520525315.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:36.174Z,1520525316.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:36.201Z,1520525316.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T16:08:36.202Z,1520525316.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:36.554Z,1520525316.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:36.580Z,1520525316.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T16:08:36.581Z,1520525316.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:36.952Z,1520525316.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:36.986Z,1520525316.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T16:08:36.987Z,1520525316.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:37.351Z,1520525317.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:37.394Z,1520525317.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T16:08:37.395Z,1520525317.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:37.753Z,1520525317.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:37.787Z,1520525317.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T16:08:37.788Z,1520525317.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:38.173Z,1520525318.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:38.189Z,1520525318.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T16:08:38.190Z,1520525318.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:38.573Z,1520525318.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:38.592Z,1520525318.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T16:08:38.593Z,1520525318.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:38.977Z,1520525318.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:38.992Z,1520525318.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T16:08:38.994Z,1520525318.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:39.351Z,1520525319.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:39.386Z,1520525319.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T16:08:39.387Z,1520525319.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:39.754Z,1520525319.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:39.786Z,1520525319.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T16:08:39.787Z,1520525319.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:40.165Z,1520525320.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:40.192Z,1520525320.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T16:08:40.193Z,1520525320.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:40.562Z,1520525320.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:40.592Z,1520525320.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T16:08:40.593Z,1520525320.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:40.966Z,1520525320.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:40.992Z,1520525320.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T16:08:40.993Z,1520525320.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:41.354Z,1520525321.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:41.390Z,1520525321.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T16:08:41.391Z,1520525321.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:41.753Z,1520525321.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:41.768Z,1520525321.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T16:08:41.781Z,1520525321.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:42.167Z,1520525322.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:42.195Z,1520525322.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T16:08:42.196Z,1520525322.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:42.567Z,1520525322.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:42.594Z,1520525322.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T16:08:42.595Z,1520525322.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:42.963Z,1520525322.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:42.994Z,1520525322.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T16:08:42.995Z,1520525322.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:43.361Z,1520525323.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:43.375Z,1520525323.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T16:08:43.393Z,1520525323.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:43.758Z,1520525323.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:43.797Z,1520525323.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T16:08:43.798Z,1520525323.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:44.167Z,1520525324.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:44.202Z,1520525324.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T16:08:44.203Z,1520525324.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:44.569Z,1520525324.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:44.600Z,1520525324.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T16:08:44.605Z,1520525324.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:44.973Z,1520525324.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:44.000Z,1520525325.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T16:08:45.001Z,1520525325.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:45.359Z,1520525325.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:45.378Z,1520525325.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T16:08:45.379Z,1520525325.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:45.761Z,1520525325.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:45.776Z,1520525325.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T16:08:45.777Z,1520525325.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:46.163Z,1520525326.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:46.178Z,1520525326.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T16:08:46.179Z,1520525326.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:46.563Z,1520525326.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:46.582Z,1520525326.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T16:08:46.583Z,1520525326.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:46.958Z,1520525326.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:46.000Z,1520525327.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T16:08:47.001Z,1520525327.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:47.366Z,1520525327.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:47.400Z,1520525327.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T16:08:47.401Z,1520525327.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:47.763Z,1520525327.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:47.778Z,1520525327.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T16:08:47.779Z,1520525327.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:48.165Z,1520525328.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:48.181Z,1520525328.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T16:08:48.182Z,1520525328.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:48.559Z,1520525328.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:48.578Z,1520525328.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T16:08:48.579Z,1520525328.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:48.957Z,1520525328.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:48.978Z,1520525328.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T16:08:48.979Z,1520525328.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:49.358Z,1520525329.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:49.381Z,1520525329.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T16:08:49.382Z,1520525329.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:49.764Z,1520525329.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:49.778Z,1520525329.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T16:08:49.779Z,1520525329.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:50.166Z,1520525330.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:50.183Z,1520525330.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T16:08:50.184Z,1520525330.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:50.567Z,1520525330.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:50.586Z,1520525330.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T16:08:50.587Z,1520525330.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:50.970Z,1520525330.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:50.990Z,1520525330.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T16:08:50.991Z,1520525330.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:51.363Z,1520525331.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:51.382Z,1520525331.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T16:08:51.383Z,1520525331.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:51.759Z,1520525331.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:51.778Z,1520525331.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T16:08:51.779Z,1520525331.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:52.134Z,1520525332.134 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T16:08:52.135Z,1520525332.135 [NAL9602] Data Fault, FailCount= 2
2018-03-08T16:08:52.135Z,1520525332.135 [NAL9602](ERROR): Data Fault
2018-03-08T16:08:52.158Z,1520525332.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:52.187Z,1520525332.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T16:08:52.187Z,1520525332.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:52.213Z,1520525332.213 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T16:08:52.531Z,1520525332.531 [NAL9602](INFO): Powering down
2018-03-08T16:08:52.552Z,1520525332.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:52.567Z,1520525332.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T16:08:52.568Z,1520525332.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:52.958Z,1520525332.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:52.992Z,1520525332.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:53.352Z,1520525333.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:53.399Z,1520525333.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:53.411Z,1520525333.411 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T16:08:53.411Z,1520525333.411 [NAL9602] No Fault, FailCount= 2
2018-03-08T16:08:53.745Z,1520525333.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:53.765Z,1520525333.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:54.160Z,1520525334.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:54.195Z,1520525334.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:54.555Z,1520525334.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:54.592Z,1520525334.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:54.948Z,1520525334.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:54.986Z,1520525334.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:55.360Z,1520525335.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:55.395Z,1520525335.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:55.755Z,1520525335.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:55.801Z,1520525335.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:56.160Z,1520525336.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:56.175Z,1520525336.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:56.555Z,1520525336.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:56.598Z,1520525336.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:56.960Z,1520525336.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:57.006Z,1520525337.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:57.354Z,1520525337.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:57.369Z,1520525337.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:57.758Z,1520525337.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:57.773Z,1520525337.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:58.159Z,1520525338.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:58.179Z,1520525338.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:58.558Z,1520525338.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:58.574Z,1520525338.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:58.959Z,1520525338.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:58.973Z,1520525338.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:59.359Z,1520525339.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:59.379Z,1520525339.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:08:59.756Z,1520525339.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:08:59.798Z,1520525339.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:00.158Z,1520525340.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:00.183Z,1520525340.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:00.559Z,1520525340.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:00.574Z,1520525340.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:00.960Z,1520525340.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:00.975Z,1520525340.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:01.355Z,1520525341.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:01.383Z,1520525341.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:01.759Z,1520525341.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:01.806Z,1520525341.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:02.158Z,1520525342.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:02.174Z,1520525342.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:02.559Z,1520525342.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:02.574Z,1520525342.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:02.957Z,1520525342.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:03.006Z,1520525343.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:03.357Z,1520525343.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:03.397Z,1520525343.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:03.761Z,1520525343.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:03.775Z,1520525343.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:04.158Z,1520525344.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:04.187Z,1520525344.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:04.559Z,1520525344.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:04.579Z,1520525344.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:04.963Z,1520525344.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:04.978Z,1520525344.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:05.361Z,1520525345.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:05.391Z,1520525345.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:05.762Z,1520525345.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:05.778Z,1520525345.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:06.161Z,1520525346.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:06.180Z,1520525346.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:06.562Z,1520525346.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:06.582Z,1520525346.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:06.957Z,1520525346.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:07.039Z,1520525347.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:07.361Z,1520525347.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:07.402Z,1520525347.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:07.752Z,1520525347.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:07.800Z,1520525347.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:08.155Z,1520525348.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:08.203Z,1520525348.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:08.567Z,1520525348.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:08.601Z,1520525348.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:08.963Z,1520525348.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:08.990Z,1520525348.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:09.352Z,1520525349.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:09.398Z,1520525349.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:09.751Z,1520525349.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:09.772Z,1520525349.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:12.904Z,1520525352.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:12.919Z,1520525352.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:13.014Z,1520525353.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:13.037Z,1520525353.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:13.407Z,1520525353.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:13.422Z,1520525353.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:13.800Z,1520525353.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:13.817Z,1520525353.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:14.211Z,1520525354.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:14.227Z,1520525354.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:14.604Z,1520525354.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:14.619Z,1520525354.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:15.002Z,1520525355.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:15.018Z,1520525355.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:15.407Z,1520525355.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:15.423Z,1520525355.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:15.808Z,1520525355.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:15.825Z,1520525355.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:16.207Z,1520525356.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:16.223Z,1520525356.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:16.607Z,1520525356.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:16.623Z,1520525356.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:17.007Z,1520525357.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:17.021Z,1520525357.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:17.400Z,1520525357.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:17.415Z,1520525357.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:17.807Z,1520525357.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:17.823Z,1520525357.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:18.210Z,1520525358.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:18.225Z,1520525358.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:18.601Z,1520525358.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:18.616Z,1520525358.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:19.007Z,1520525359.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:19.022Z,1520525359.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:19.405Z,1520525359.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:19.420Z,1520525359.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:19.803Z,1520525359.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:19.817Z,1520525359.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:20.207Z,1520525360.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:20.223Z,1520525360.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:20.607Z,1520525360.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:20.623Z,1520525360.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:21.003Z,1520525361.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:21.017Z,1520525361.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:21.407Z,1520525361.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:21.423Z,1520525361.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:21.803Z,1520525361.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:21.818Z,1520525361.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:22.207Z,1520525362.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:22.222Z,1520525362.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:22.591Z,1520525362.591 [NAL9602](INFO): Powering up NAL9602
2018-03-08T16:09:22.608Z,1520525362.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:22.623Z,1520525362.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:23.005Z,1520525363.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:23.020Z,1520525363.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:23.400Z,1520525363.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:23.415Z,1520525363.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:23.807Z,1520525363.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:23.823Z,1520525363.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:24.205Z,1520525364.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:24.226Z,1520525364.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:24.606Z,1520525364.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:24.621Z,1520525364.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:25.007Z,1520525365.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:25.022Z,1520525365.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:25.407Z,1520525365.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:25.422Z,1520525365.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:25.803Z,1520525365.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:25.818Z,1520525365.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:26.206Z,1520525366.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:26.221Z,1520525366.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:26.607Z,1520525366.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:26.621Z,1520525366.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:27.003Z,1520525367.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:27.018Z,1520525367.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:27.405Z,1520525367.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:27.420Z,1520525367.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:27.807Z,1520525367.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:27.821Z,1520525367.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:28.204Z,1520525368.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:28.219Z,1520525368.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:28.607Z,1520525368.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:28.622Z,1520525368.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:29.005Z,1520525369.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:29.020Z,1520525369.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:29.403Z,1520525369.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:29.418Z,1520525369.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:29.807Z,1520525369.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:29.822Z,1520525369.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:30.207Z,1520525370.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:30.222Z,1520525370.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:30.603Z,1520525370.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:30.618Z,1520525370.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:31.007Z,1520525371.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:31.023Z,1520525371.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:31.407Z,1520525371.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:31.421Z,1520525371.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:31.803Z,1520525371.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:31.817Z,1520525371.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:32.207Z,1520525372.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:32.222Z,1520525372.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:32.605Z,1520525372.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:32.619Z,1520525372.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:33.004Z,1520525373.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:33.019Z,1520525373.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:33.421Z,1520525373.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:33.453Z,1520525373.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:33.786Z,1520525373.786 [NAL9602](INFO): NAL9602 initialized
2018-03-08T16:09:33.814Z,1520525373.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:33.834Z,1520525373.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:34.210Z,1520525374.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:34.225Z,1520525374.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:34.614Z,1520525374.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:34.629Z,1520525374.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:35.018Z,1520525375.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:35.033Z,1520525375.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:35.413Z,1520525375.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:35.428Z,1520525375.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:35.806Z,1520525375.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:35.825Z,1520525375.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:36.215Z,1520525376.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:36.231Z,1520525376.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:36.612Z,1520525376.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:36.626Z,1520525376.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:37.010Z,1520525377.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:37.030Z,1520525377.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:37.416Z,1520525377.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:37.431Z,1520525377.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:37.817Z,1520525377.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:37.832Z,1520525377.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:38.216Z,1520525378.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:38.231Z,1520525378.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:38.607Z,1520525378.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:38.622Z,1520525378.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:39.011Z,1520525379.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:39.026Z,1520525379.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:39.416Z,1520525379.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:39.431Z,1520525379.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:39.817Z,1520525379.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:39.832Z,1520525379.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:40.217Z,1520525380.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:40.238Z,1520525380.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:40.611Z,1520525380.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:40.626Z,1520525380.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:41.013Z,1520525381.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:41.029Z,1520525381.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:41.417Z,1520525381.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:41.438Z,1520525381.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:41.816Z,1520525381.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:41.832Z,1520525381.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:42.215Z,1520525382.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:42.230Z,1520525382.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:42.612Z,1520525382.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:42.627Z,1520525382.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:43.008Z,1520525383.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:43.023Z,1520525383.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:43.415Z,1520525383.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:43.431Z,1520525383.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:43.816Z,1520525383.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:43.831Z,1520525383.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:44.216Z,1520525384.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:44.238Z,1520525384.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:44.613Z,1520525384.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:44.628Z,1520525384.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:45.006Z,1520525385.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:45.021Z,1520525385.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:45.416Z,1520525385.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:45.438Z,1520525385.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:45.817Z,1520525385.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:45.833Z,1520525385.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:46.216Z,1520525386.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:46.231Z,1520525386.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:46.611Z,1520525386.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:46.627Z,1520525386.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:47.011Z,1520525387.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:47.026Z,1520525387.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:47.409Z,1520525387.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:47.454Z,1520525387.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:47.817Z,1520525387.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:47.833Z,1520525387.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:48.216Z,1520525388.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:48.238Z,1520525388.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:48.612Z,1520525388.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:48.627Z,1520525388.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:49.009Z,1520525389.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:49.030Z,1520525389.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:49.417Z,1520525389.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:49.432Z,1520525389.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:49.818Z,1520525389.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:49.833Z,1520525389.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:50.216Z,1520525390.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:50.235Z,1520525390.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:50.606Z,1520525390.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:50.629Z,1520525390.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:51.013Z,1520525391.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:51.028Z,1520525391.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:51.420Z,1520525391.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:51.437Z,1520525391.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:51.820Z,1520525391.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:51.836Z,1520525391.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:52.219Z,1520525392.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:52.234Z,1520525392.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:52.613Z,1520525392.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:52.628Z,1520525392.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:53.015Z,1520525393.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:53.031Z,1520525393.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:53.418Z,1520525393.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:53.439Z,1520525393.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:53.810Z,1520525393.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:53.838Z,1520525393.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:54.221Z,1520525394.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:54.237Z,1520525394.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:54.599Z,1520525394.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:54.626Z,1520525394.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:54.996Z,1520525394.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:55.026Z,1520525395.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:55.414Z,1520525395.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:55.442Z,1520525395.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:55.825Z,1520525395.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:55.841Z,1520525395.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:56.222Z,1520525396.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:56.238Z,1520525396.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:56.599Z,1520525396.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:56.625Z,1520525396.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:56.999Z,1520525396.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:57.026Z,1520525397.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:57.416Z,1520525397.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:57.432Z,1520525397.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:57.820Z,1520525397.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:57.835Z,1520525397.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:58.222Z,1520525398.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:58.237Z,1520525398.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:58.595Z,1520525398.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:58.626Z,1520525398.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:59.016Z,1520525399.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:59.031Z,1520525399.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:59.416Z,1520525399.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:59.442Z,1520525399.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:09:59.815Z,1520525399.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:09:59.842Z,1520525399.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:00.221Z,1520525400.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:00.236Z,1520525400.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:00.599Z,1520525400.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:00.630Z,1520525400.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:00.996Z,1520525400.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:01.020Z,1520525401.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:01.409Z,1520525401.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:01.442Z,1520525401.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:01.826Z,1520525401.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:01.841Z,1520525401.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:02.221Z,1520525402.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:02.236Z,1520525402.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:02.603Z,1520525402.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:02.634Z,1520525402.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:02.998Z,1520525402.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:03.034Z,1520525403.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:03.405Z,1520525403.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:03.440Z,1520525403.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:03.829Z,1520525403.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:03.845Z,1520525403.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:04.233Z,1520525404.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:04.248Z,1520525404.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:04.603Z,1520525404.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:04.634Z,1520525404.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:04.998Z,1520525404.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:05.034Z,1520525405.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:05.422Z,1520525405.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:05.437Z,1520525405.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:05.810Z,1520525405.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:05.847Z,1520525405.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:06.213Z,1520525406.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:06.237Z,1520525406.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:06.605Z,1520525406.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:06.619Z,1520525406.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:07.001Z,1520525407.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:07.016Z,1520525407.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:07.417Z,1520525407.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:07.446Z,1520525407.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:07.817Z,1520525407.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:07.840Z,1520525407.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:08.213Z,1520525408.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:08.237Z,1520525408.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:08.605Z,1520525408.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:08.636Z,1520525408.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:09.002Z,1520525409.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:09.017Z,1520525409.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:09.417Z,1520525409.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:09.446Z,1520525409.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:09.821Z,1520525409.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:09.851Z,1520525409.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:12.924Z,1520525412.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:12.953Z,1520525412.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:13.046Z,1520525413.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:13.089Z,1520525413.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:13.410Z,1520525413.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:13.446Z,1520525413.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:13.805Z,1520525413.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:13.820Z,1520525413.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:14.203Z,1520525414.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:14.219Z,1520525414.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:14.617Z,1520525414.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:14.643Z,1520525414.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:15.017Z,1520525415.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:15.042Z,1520525415.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:15.413Z,1520525415.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:15.445Z,1520525415.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:15.811Z,1520525415.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:15.827Z,1520525415.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:16.207Z,1520525416.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:16.222Z,1520525416.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:16.604Z,1520525416.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:16.619Z,1520525416.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:17.007Z,1520525417.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:17.023Z,1520525417.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:17.422Z,1520525417.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:17.451Z,1520525417.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:17.805Z,1520525417.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:17.821Z,1520525417.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:18.221Z,1520525418.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:18.251Z,1520525418.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:18.606Z,1520525418.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:18.621Z,1520525418.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:19.000Z,1520525419.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:19.024Z,1520525419.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:19.417Z,1520525419.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:19.450Z,1520525419.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:19.821Z,1520525419.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:19.852Z,1520525419.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:20.217Z,1520525420.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:20.250Z,1520525420.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:20.606Z,1520525420.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:20.621Z,1520525420.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:21.006Z,1520525421.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:21.026Z,1520525421.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:21.405Z,1520525421.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:21.421Z,1520525421.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:21.817Z,1520525421.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:21.849Z,1520525421.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:22.221Z,1520525422.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:22.254Z,1520525422.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:22.608Z,1520525422.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:22.624Z,1520525422.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:23.010Z,1520525423.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:23.026Z,1520525423.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:23.412Z,1520525423.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:23.427Z,1520525423.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:23.809Z,1520525423.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:23.825Z,1520525423.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:24.222Z,1520525424.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:24.250Z,1520525424.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:24.608Z,1520525424.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:24.624Z,1520525424.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:25.036Z,1520525425.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:25.058Z,1520525425.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:25.413Z,1520525425.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:25.429Z,1520525425.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:25.821Z,1520525425.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:25.851Z,1520525425.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:26.221Z,1520525426.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:26.252Z,1520525426.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:26.608Z,1520525426.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:26.623Z,1520525426.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:27.009Z,1520525427.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:27.024Z,1520525427.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:27.421Z,1520525427.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:27.451Z,1520525427.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:27.821Z,1520525427.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:27.852Z,1520525427.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:28.221Z,1520525428.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:28.249Z,1520525428.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:28.610Z,1520525428.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:28.626Z,1520525428.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:29.004Z,1520525429.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:29.025Z,1520525429.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:29.412Z,1520525429.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:29.428Z,1520525429.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:29.814Z,1520525429.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:29.830Z,1520525429.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:30.213Z,1520525430.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:30.229Z,1520525430.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:30.611Z,1520525430.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:30.626Z,1520525430.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:31.003Z,1520525431.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:31.018Z,1520525431.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:31.413Z,1520525431.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:31.428Z,1520525431.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:31.817Z,1520525431.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:31.832Z,1520525431.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:32.212Z,1520525432.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:32.228Z,1520525432.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:32.611Z,1520525432.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:32.627Z,1520525432.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:33.005Z,1520525433.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:33.021Z,1520525433.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:33.413Z,1520525433.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:33.429Z,1520525433.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:33.814Z,1520525433.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:33.834Z,1520525433.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:34.226Z,1520525434.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:34.261Z,1520525434.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:34.610Z,1520525434.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:34.627Z,1520525434.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:35.006Z,1520525435.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:35.021Z,1520525435.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:35.413Z,1520525435.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:35.428Z,1520525435.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:35.812Z,1520525435.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:35.828Z,1520525435.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:36.211Z,1520525436.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:36.227Z,1520525436.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:36.611Z,1520525436.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:36.626Z,1520525436.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:37.004Z,1520525437.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:37.019Z,1520525437.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:37.425Z,1520525437.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:37.457Z,1520525437.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:37.817Z,1520525437.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:37.832Z,1520525437.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:38.216Z,1520525438.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:38.231Z,1520525438.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:38.613Z,1520525438.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:38.628Z,1520525438.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:39.011Z,1520525439.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:39.026Z,1520525439.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:39.416Z,1520525439.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:39.438Z,1520525439.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:39.817Z,1520525439.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:39.838Z,1520525439.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:40.216Z,1520525440.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:40.231Z,1520525440.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:40.611Z,1520525440.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:40.627Z,1520525440.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:41.006Z,1520525441.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:41.021Z,1520525441.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:41.416Z,1520525441.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:41.438Z,1520525441.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:41.812Z,1520525441.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:41.828Z,1520525441.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:42.217Z,1520525442.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:42.233Z,1520525442.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:42.607Z,1520525442.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:42.626Z,1520525442.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:43.004Z,1520525443.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:43.019Z,1520525443.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:43.416Z,1520525443.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:43.438Z,1520525443.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:43.817Z,1520525443.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:43.832Z,1520525443.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:44.215Z,1520525444.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:44.238Z,1520525444.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:44.611Z,1520525444.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:44.626Z,1520525444.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:45.011Z,1520525445.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:45.026Z,1520525445.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:45.417Z,1520525445.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:45.438Z,1520525445.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:45.817Z,1520525445.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:45.833Z,1520525445.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:46.213Z,1520525446.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:46.228Z,1520525446.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:46.607Z,1520525446.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:46.622Z,1520525446.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:47.013Z,1520525447.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:47.029Z,1520525447.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:47.417Z,1520525447.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:47.433Z,1520525447.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:47.812Z,1520525447.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:47.828Z,1520525447.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:48.216Z,1520525448.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:48.238Z,1520525448.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:48.611Z,1520525448.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:48.626Z,1520525448.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:49.004Z,1520525449.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:49.019Z,1520525449.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:49.415Z,1520525449.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:49.431Z,1520525449.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:49.816Z,1520525449.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:49.831Z,1520525449.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:50.217Z,1520525450.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:50.238Z,1520525450.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:50.611Z,1520525450.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:50.626Z,1520525450.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:51.011Z,1520525451.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:51.026Z,1520525451.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:51.415Z,1520525451.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:51.431Z,1520525451.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:51.817Z,1520525451.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:51.838Z,1520525451.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:52.217Z,1520525452.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:52.238Z,1520525452.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:52.611Z,1520525452.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:52.627Z,1520525452.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:53.007Z,1520525453.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:53.023Z,1520525453.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:53.417Z,1520525453.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:53.433Z,1520525453.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:53.814Z,1520525453.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:53.835Z,1520525453.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:54.214Z,1520525454.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:54.234Z,1520525454.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:54.612Z,1520525454.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:54.627Z,1520525454.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:55.004Z,1520525455.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:55.020Z,1520525455.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:55.416Z,1520525455.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:55.432Z,1520525455.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:55.817Z,1520525455.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:55.838Z,1520525455.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:56.212Z,1520525456.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:56.228Z,1520525456.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:56.611Z,1520525456.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:56.626Z,1520525456.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:57.007Z,1520525457.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:57.023Z,1520525457.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:57.414Z,1520525457.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:57.434Z,1520525457.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:57.820Z,1520525457.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:57.842Z,1520525457.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:58.221Z,1520525458.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:58.236Z,1520525458.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:58.605Z,1520525458.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:58.625Z,1520525458.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:59.001Z,1520525459.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:59.033Z,1520525459.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:59.415Z,1520525459.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:59.441Z,1520525459.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:10:59.820Z,1520525459.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:10:59.842Z,1520525459.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:00.219Z,1520525460.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:00.242Z,1520525460.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:00.605Z,1520525460.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:00.626Z,1520525460.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:01.001Z,1520525461.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:01.024Z,1520525461.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:01.419Z,1520525461.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:01.442Z,1520525461.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:01.821Z,1520525461.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:01.837Z,1520525461.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:02.220Z,1520525462.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:02.236Z,1520525462.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:02.605Z,1520525462.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:02.626Z,1520525462.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:03.015Z,1520525463.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:03.035Z,1520525463.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:03.421Z,1520525463.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:03.436Z,1520525463.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:03.820Z,1520525463.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:03.842Z,1520525463.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:04.221Z,1520525464.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:04.237Z,1520525464.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:04.613Z,1520525464.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:04.628Z,1520525464.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:05.023Z,1520525465.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:05.038Z,1520525465.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:05.419Z,1520525465.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:05.438Z,1520525465.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:05.818Z,1520525465.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:05.838Z,1520525465.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:06.225Z,1520525466.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:06.246Z,1520525466.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:06.604Z,1520525466.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:06.632Z,1520525466.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:06.994Z,1520525466.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:07.030Z,1520525467.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:07.417Z,1520525467.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:07.435Z,1520525467.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:07.829Z,1520525467.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:07.850Z,1520525467.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:08.221Z,1520525468.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:08.237Z,1520525468.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:08.600Z,1520525468.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:08.628Z,1520525468.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:09.003Z,1520525469.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:09.031Z,1520525469.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:09.422Z,1520525469.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:09.437Z,1520525469.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:09.441Z,1520525469.441 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T16:06:09.4Z
2018-03-08T16:11:09.441Z,1520525469.441 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T16:11:09.441Z,1520525469.441 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T16:11:09.822Z,1520525469.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:09.842Z,1520525469.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:10.313Z,1520525470.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:10.342Z,1520525470.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:13.299Z,1520525473.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:13.315Z,1520525473.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:13.407Z,1520525473.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:13.440Z,1520525473.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:13.784Z,1520525473.784 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0196.lzma
2018-03-08T16:11:13.817Z,1520525473.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:13.847Z,1520525473.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:14.221Z,1520525474.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:14.250Z,1520525474.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:14.579Z,1520525474.579 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0196.lzma.bak
2018-03-08T16:11:14.579Z,1520525474.579 [DataOverHttps](INFO): SBD MOMSN=7987162
2018-03-08T16:11:14.633Z,1520525474.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:14.648Z,1520525474.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:15.193Z,1520525475.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:15.209Z,1520525475.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:15.400Z,1520525475.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:15.415Z,1520525475.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:18.540Z,1520525478.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:18.556Z,1520525478.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:18.648Z,1520525478.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:18.693Z,1520525478.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:19.033Z,1520525479.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:19.048Z,1520525479.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:19.434Z,1520525479.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:19.454Z,1520525479.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:19.813Z,1520525479.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:19.844Z,1520525479.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:20.212Z,1520525480.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:20.228Z,1520525480.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:20.610Z,1520525480.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:20.625Z,1520525480.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:23.705Z,1520525483.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:23.720Z,1520525483.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:23.847Z,1520525483.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:23.867Z,1520525483.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:24.169Z,1520525484.169 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180308T074127/Express0197.lzma
2018-03-08T16:11:24.214Z,1520525484.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:24.230Z,1520525484.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:24.588Z,1520525484.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:24.615Z,1520525484.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:24.963Z,1520525484.963 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0197.lzma.bak
2018-03-08T16:11:24.963Z,1520525484.963 [DataOverHttps](INFO): SBD MOMSN=7987164
2018-03-08T16:11:24.987Z,1520525484.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:25.030Z,1520525485.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:25.567Z,1520525485.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:25.581Z,1520525485.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:25.584Z,1520525485.584 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T16:11:25.585Z,1520525485.585 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T16:11:25.585Z,1520525485.585 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T16:11:25.783Z,1520525485.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:25.822Z,1520525485.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:28.891Z,1520525488.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:28.914Z,1520525488.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:29.021Z,1520525489.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:29.037Z,1520525489.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:29.389Z,1520525489.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:29.412Z,1520525489.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:29.785Z,1520525489.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:29.814Z,1520525489.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:30.178Z,1520525490.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:30.215Z,1520525490.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:30.577Z,1520525490.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:30.594Z,1520525490.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:30.974Z,1520525490.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:30.989Z,1520525490.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:31.389Z,1520525491.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:31.420Z,1520525491.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:31.786Z,1520525491.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:31.818Z,1520525491.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:32.190Z,1520525492.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:32.220Z,1520525492.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:32.567Z,1520525492.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:32.583Z,1520525492.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:32.973Z,1520525492.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:32.988Z,1520525492.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:33.376Z,1520525493.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:33.391Z,1520525493.391 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:33.391Z,1520525493.391 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 169
2018-03-08T16:11:33.391Z,1520525493.391 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T16:11:33.393Z,1520525493.393 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:33.393Z,1520525493.393 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 169
2018-03-08T16:11:33.393Z,1520525493.393 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T16:11:33.395Z,1520525493.395 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:33.395Z,1520525493.395 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 169
2018-03-08T16:11:33.395Z,1520525493.395 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T16:11:33.423Z,1520525493.423 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T16:11:33.423Z,1520525493.423 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T16:11:33.423Z,1520525493.423 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T16:11:33.778Z,1520525493.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:33.821Z,1520525493.821 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T16:11:33.821Z,1520525493.821 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 169
2018-03-08T16:11:33.821Z,1520525493.821 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T16:11:33.822Z,1520525493.822 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 169
2018-03-08T16:11:33.822Z,1520525493.822 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T16:11:33.822Z,1520525493.822 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 169
2018-03-08T16:11:34.185Z,1520525494.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:34.199Z,1520525494.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T16:11:34.200Z,1520525494.200 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:11:34.200Z,1520525494.200 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:11:34.201Z,1520525494.201 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T16:11:34.201Z,1520525494.201 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:11:34.201Z,1520525494.201 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:11:34.202Z,1520525494.202 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T16:11:34.202Z,1520525494.202 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:11:34.202Z,1520525494.202 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:11:34.585Z,1520525494.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:34.600Z,1520525494.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T16:11:34.601Z,1520525494.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:34.960Z,1520525494.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:34.991Z,1520525494.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T16:11:34.992Z,1520525494.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:35.382Z,1520525495.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:35.398Z,1520525495.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T16:11:35.399Z,1520525495.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:35.777Z,1520525495.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:35.797Z,1520525495.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T16:11:35.798Z,1520525495.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:36.178Z,1520525496.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:36.193Z,1520525496.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T16:11:36.194Z,1520525496.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:36.606Z,1520525496.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:36.682Z,1520525496.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-03-08T16:11:36.683Z,1520525496.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:36.985Z,1520525496.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:36.000Z,1520525497.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T16:11:37.001Z,1520525497.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:37.384Z,1520525497.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:37.399Z,1520525497.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T16:11:37.400Z,1520525497.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:37.775Z,1520525497.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:37.790Z,1520525497.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T16:11:37.791Z,1520525497.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:38.186Z,1520525498.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:38.201Z,1520525498.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T16:11:38.201Z,1520525498.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:38.573Z,1520525498.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:38.588Z,1520525498.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T16:11:38.589Z,1520525498.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:38.980Z,1520525498.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:38.995Z,1520525498.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T16:11:38.996Z,1520525498.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:39.380Z,1520525499.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:39.488Z,1520525499.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T16:11:39.489Z,1520525499.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:39.775Z,1520525499.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:39.802Z,1520525499.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T16:11:39.803Z,1520525499.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:40.186Z,1520525500.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:40.201Z,1520525500.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T16:11:40.202Z,1520525500.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:40.589Z,1520525500.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:40.610Z,1520525500.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T16:11:40.611Z,1520525500.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:40.978Z,1520525500.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:40.993Z,1520525500.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T16:11:40.994Z,1520525500.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:41.382Z,1520525501.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:41.397Z,1520525501.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T16:11:41.398Z,1520525501.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:41.780Z,1520525501.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:41.802Z,1520525501.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T16:11:41.803Z,1520525501.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:42.173Z,1520525502.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:42.193Z,1520525502.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T16:11:42.194Z,1520525502.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:42.590Z,1520525502.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:42.610Z,1520525502.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T16:11:42.611Z,1520525502.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:42.993Z,1520525502.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:43.014Z,1520525503.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T16:11:43.015Z,1520525503.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:43.387Z,1520525503.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:43.402Z,1520525503.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T16:11:43.403Z,1520525503.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:43.780Z,1520525503.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:43.795Z,1520525503.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T16:11:43.796Z,1520525503.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:44.181Z,1520525504.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:44.202Z,1520525504.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T16:11:44.203Z,1520525504.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:44.563Z,1520525504.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:44.628Z,1520525504.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T16:11:44.653Z,1520525504.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:44.980Z,1520525504.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:44.996Z,1520525504.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T16:11:44.997Z,1520525504.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:45.366Z,1520525505.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:45.402Z,1520525505.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T16:11:45.403Z,1520525505.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:45.791Z,1520525505.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:45.809Z,1520525505.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T16:11:45.810Z,1520525505.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:46.195Z,1520525506.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:46.211Z,1520525506.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T16:11:46.212Z,1520525506.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:46.584Z,1520525506.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:46.599Z,1520525506.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T16:11:46.600Z,1520525506.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:46.965Z,1520525506.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:46.998Z,1520525506.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T16:11:46.999Z,1520525506.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:47.371Z,1520525507.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:47.402Z,1520525507.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T16:11:47.403Z,1520525507.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:47.766Z,1520525507.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:47.807Z,1520525507.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T16:11:47.809Z,1520525507.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:48.163Z,1520525508.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:48.199Z,1520525508.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T16:11:48.200Z,1520525508.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:48.592Z,1520525508.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:48.614Z,1520525508.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T16:11:48.615Z,1520525508.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:48.991Z,1520525508.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:49.005Z,1520525509.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T16:11:49.006Z,1520525509.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:49.384Z,1520525509.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:49.406Z,1520525509.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T16:11:49.407Z,1520525509.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:49.769Z,1520525509.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:49.802Z,1520525509.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T16:11:49.803Z,1520525509.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:50.165Z,1520525510.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:50.199Z,1520525510.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T16:11:50.200Z,1520525510.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:50.568Z,1520525510.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:50.599Z,1520525510.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T16:11:50.600Z,1520525510.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:50.970Z,1520525510.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:50.996Z,1520525510.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T16:11:50.997Z,1520525510.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:51.365Z,1520525511.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:51.399Z,1520525511.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T16:11:51.400Z,1520525511.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:51.785Z,1520525511.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:51.801Z,1520525511.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T16:11:51.802Z,1520525511.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:52.193Z,1520525512.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:52.215Z,1520525512.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T16:11:52.216Z,1520525512.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:52.586Z,1520525512.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:52.601Z,1520525512.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T16:11:52.601Z,1520525512.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:52.965Z,1520525512.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:52.998Z,1520525512.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T16:11:52.999Z,1520525512.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:53.368Z,1520525513.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:53.399Z,1520525513.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:53.771Z,1520525513.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:53.809Z,1520525513.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:54.167Z,1520525514.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:54.201Z,1520525514.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:54.226Z,1520525514.226 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T16:11:54.586Z,1520525514.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:54.614Z,1520525514.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:54.985Z,1520525514.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:55.007Z,1520525515.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:55.385Z,1520525515.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:55.414Z,1520525515.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:55.428Z,1520525515.428 [CBIT](INFO): Clearing failed state for component DropWeight
2018-03-08T16:11:55.428Z,1520525515.428 [DropWeight] No Fault, FailCount= 1
2018-03-08T16:11:55.771Z,1520525515.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:55.786Z,1520525515.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:56.166Z,1520525516.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:56.189Z,1520525516.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:56.572Z,1520525516.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:56.587Z,1520525516.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:56.968Z,1520525516.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:56.983Z,1520525516.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:57.383Z,1520525517.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:57.413Z,1520525517.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:57.785Z,1520525517.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:57.809Z,1520525517.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:58.186Z,1520525518.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:58.208Z,1520525518.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:58.564Z,1520525518.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:58.579Z,1520525518.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:58.978Z,1520525518.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:59.011Z,1520525519.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:59.372Z,1520525519.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:59.388Z,1520525519.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:11:59.785Z,1520525519.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:11:59.816Z,1520525519.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:00.185Z,1520525520.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:00.221Z,1520525520.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:00.586Z,1520525520.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:00.618Z,1520525520.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:00.978Z,1520525520.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:00.992Z,1520525520.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:01.374Z,1520525521.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:01.390Z,1520525521.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:01.773Z,1520525521.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:01.789Z,1520525521.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:02.174Z,1520525522.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:02.217Z,1520525522.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:02.589Z,1520525522.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:02.619Z,1520525522.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:02.985Z,1520525522.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:03.000Z,1520525523.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:03.381Z,1520525523.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:03.402Z,1520525523.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:03.775Z,1520525523.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:03.794Z,1520525523.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:04.180Z,1520525524.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:04.195Z,1520525524.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:04.575Z,1520525524.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:04.589Z,1520525524.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:04.976Z,1520525524.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:04.991Z,1520525524.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:05.378Z,1520525525.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:05.393Z,1520525525.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:05.781Z,1520525525.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:05.796Z,1520525525.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:06.190Z,1520525526.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:06.221Z,1520525526.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:06.581Z,1520525526.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:06.596Z,1520525526.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:06.984Z,1520525526.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:06.999Z,1520525526.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:07.379Z,1520525527.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:07.395Z,1520525527.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:07.777Z,1520525527.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:07.792Z,1520525527.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:08.181Z,1520525528.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:08.204Z,1520525528.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:08.584Z,1520525528.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:08.600Z,1520525528.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:08.984Z,1520525528.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:09.006Z,1520525529.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:09.384Z,1520525529.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:09.399Z,1520525529.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:09.777Z,1520525529.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:09.798Z,1520525529.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:10.180Z,1520525530.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:10.202Z,1520525530.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:10.579Z,1520525530.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:10.594Z,1520525530.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:10.977Z,1520525530.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:10.994Z,1520525530.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:11.384Z,1520525531.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:11.399Z,1520525531.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:11.790Z,1520525531.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:11.805Z,1520525531.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:12.186Z,1520525532.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:12.207Z,1520525532.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:12.577Z,1520525532.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:12.592Z,1520525532.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:12.976Z,1520525532.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:12.990Z,1520525532.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:13.390Z,1520525533.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:13.410Z,1520525533.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:13.785Z,1520525533.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:13.801Z,1520525533.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:14.188Z,1520525534.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:14.206Z,1520525534.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:14.578Z,1520525534.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:14.599Z,1520525534.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:14.979Z,1520525534.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:14.994Z,1520525534.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:15.386Z,1520525535.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:15.401Z,1520525535.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:15.790Z,1520525535.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:15.808Z,1520525535.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:16.189Z,1520525536.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:16.204Z,1520525536.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:16.561Z,1520525536.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:16.598Z,1520525536.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:16.976Z,1520525536.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:16.991Z,1520525536.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:17.379Z,1520525537.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:17.402Z,1520525537.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:17.790Z,1520525537.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:17.806Z,1520525537.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:18.192Z,1520525538.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:18.208Z,1520525538.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:18.586Z,1520525538.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:18.606Z,1520525538.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:18.978Z,1520525538.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:18.993Z,1520525538.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:19.380Z,1520525539.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:19.395Z,1520525539.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:19.780Z,1520525539.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:19.795Z,1520525539.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:20.175Z,1520525540.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:20.191Z,1520525540.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:20.590Z,1520525540.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:20.611Z,1520525540.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:20.989Z,1520525540.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:21.011Z,1520525541.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:21.392Z,1520525541.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:21.407Z,1520525541.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:21.780Z,1520525541.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:21.795Z,1520525541.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:22.178Z,1520525542.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:22.198Z,1520525542.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:22.583Z,1520525542.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:22.598Z,1520525542.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:22.958Z,1520525542.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:22.988Z,1520525542.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:23.388Z,1520525543.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:23.403Z,1520525543.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:23.792Z,1520525543.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:23.806Z,1520525543.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:24.187Z,1520525544.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:24.202Z,1520525544.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:24.580Z,1520525544.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:24.596Z,1520525544.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:24.966Z,1520525544.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:25.001Z,1520525545.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:25.390Z,1520525545.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:25.406Z,1520525545.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:25.790Z,1520525545.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:25.805Z,1520525545.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:26.195Z,1520525546.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:26.211Z,1520525546.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:29.297Z,1520525549.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:29.312Z,1520525549.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:29.430Z,1520525549.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:29.447Z,1520525549.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:29.806Z,1520525549.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:29.843Z,1520525549.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:30.194Z,1520525550.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:30.210Z,1520525550.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:30.605Z,1520525550.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:30.639Z,1520525550.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:30.991Z,1520525550.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:31.005Z,1520525551.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:31.391Z,1520525551.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:31.406Z,1520525551.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:31.791Z,1520525551.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:31.806Z,1520525551.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:32.187Z,1520525552.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:32.203Z,1520525552.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:32.594Z,1520525552.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:32.614Z,1520525552.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:32.993Z,1520525552.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:33.008Z,1520525553.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:33.388Z,1520525553.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:33.422Z,1520525553.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:33.776Z,1520525553.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:33.791Z,1520525553.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:34.186Z,1520525554.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:34.218Z,1520525554.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:34.587Z,1520525554.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:34.622Z,1520525554.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:34.982Z,1520525554.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:34.998Z,1520525554.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:35.408Z,1520525555.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:35.423Z,1520525555.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:35.808Z,1520525555.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:35.822Z,1520525555.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:36.197Z,1520525556.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:36.226Z,1520525556.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:36.585Z,1520525556.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:36.600Z,1520525556.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:36.987Z,1520525556.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:37.026Z,1520525557.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:37.393Z,1520525557.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:37.425Z,1520525557.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:37.801Z,1520525557.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:37.824Z,1520525557.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:38.198Z,1520525558.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:38.230Z,1520525558.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:38.587Z,1520525558.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:38.603Z,1520525558.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:38.991Z,1520525558.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:39.007Z,1520525559.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:39.401Z,1520525559.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:39.432Z,1520525559.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:39.785Z,1520525559.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:39.801Z,1520525559.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:40.201Z,1520525560.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:40.233Z,1520525560.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:40.592Z,1520525560.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:40.607Z,1520525560.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:40.985Z,1520525560.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:40.000Z,1520525561.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:41.401Z,1520525561.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:41.434Z,1520525561.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:41.797Z,1520525561.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:41.812Z,1520525561.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:42.205Z,1520525562.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:42.235Z,1520525562.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:42.589Z,1520525562.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:42.605Z,1520525562.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:42.988Z,1520525562.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:43.002Z,1520525563.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:43.401Z,1520525563.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:43.433Z,1520525563.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:43.805Z,1520525563.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:43.829Z,1520525563.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:44.201Z,1520525564.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:44.230Z,1520525564.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:44.589Z,1520525564.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:44.605Z,1520525564.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:44.988Z,1520525564.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:45.003Z,1520525565.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:45.405Z,1520525565.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:45.428Z,1520525565.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:45.798Z,1520525565.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:45.829Z,1520525565.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:46.201Z,1520525566.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:46.232Z,1520525566.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:46.589Z,1520525566.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:46.604Z,1520525566.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:46.984Z,1520525566.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:46.000Z,1520525567.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:47.401Z,1520525567.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:47.432Z,1520525567.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:47.793Z,1520525567.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:47.807Z,1520525567.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:48.201Z,1520525568.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:48.233Z,1520525568.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:48.591Z,1520525568.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:48.606Z,1520525568.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:48.988Z,1520525568.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:49.002Z,1520525569.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:49.401Z,1520525569.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:49.433Z,1520525569.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:49.793Z,1520525569.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:49.808Z,1520525569.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:50.205Z,1520525570.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:50.234Z,1520525570.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:50.590Z,1520525570.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:50.606Z,1520525570.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:50.986Z,1520525570.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:51.006Z,1520525571.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:51.402Z,1520525571.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:51.431Z,1520525571.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:51.805Z,1520525571.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:51.829Z,1520525571.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:52.205Z,1520525572.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:52.227Z,1520525572.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:52.588Z,1520525572.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:52.603Z,1520525572.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:52.985Z,1520525572.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:53.001Z,1520525573.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:53.405Z,1520525573.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:53.428Z,1520525573.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:53.793Z,1520525573.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:53.808Z,1520525573.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:54.201Z,1520525574.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:54.231Z,1520525574.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:54.589Z,1520525574.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:54.604Z,1520525574.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:54.991Z,1520525574.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:55.006Z,1520525575.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:55.401Z,1520525575.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:55.430Z,1520525575.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:55.801Z,1520525575.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:55.831Z,1520525575.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:56.203Z,1520525576.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:56.231Z,1520525576.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:56.592Z,1520525576.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:56.607Z,1520525576.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:56.987Z,1520525576.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:57.003Z,1520525577.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:57.401Z,1520525577.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:57.431Z,1520525577.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:57.789Z,1520525577.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:57.805Z,1520525577.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:58.205Z,1520525578.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:58.228Z,1520525578.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:58.589Z,1520525578.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:58.603Z,1520525578.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:58.984Z,1520525578.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:58.000Z,1520525579.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:59.401Z,1520525579.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:59.432Z,1520525579.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:12:59.792Z,1520525579.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:12:59.807Z,1520525579.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:00.201Z,1520525580.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:00.232Z,1520525580.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:00.626Z,1520525580.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:00.646Z,1520525580.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:00.994Z,1520525580.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:01.009Z,1520525581.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:01.394Z,1520525581.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:01.409Z,1520525581.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:01.801Z,1520525581.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:01.832Z,1520525581.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:02.201Z,1520525582.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:02.230Z,1520525582.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:02.590Z,1520525582.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:02.605Z,1520525582.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:02.986Z,1520525582.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:03.010Z,1520525583.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:03.397Z,1520525583.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:03.412Z,1520525583.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:03.798Z,1520525583.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:03.815Z,1520525583.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:04.197Z,1520525584.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:04.213Z,1520525584.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:04.594Z,1520525584.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:04.608Z,1520525584.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:04.989Z,1520525584.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:05.004Z,1520525585.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:05.394Z,1520525585.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:05.423Z,1520525585.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:05.802Z,1520525585.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:05.817Z,1520525585.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:06.202Z,1520525586.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:06.218Z,1520525586.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:06.591Z,1520525586.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:06.611Z,1520525586.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:06.985Z,1520525586.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:07.007Z,1520525587.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:07.402Z,1520525587.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:07.417Z,1520525587.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:07.800Z,1520525587.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:07.816Z,1520525587.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:08.201Z,1520525588.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:08.222Z,1520525588.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:08.591Z,1520525588.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:08.606Z,1520525588.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:08.983Z,1520525588.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:09.005Z,1520525589.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:09.395Z,1520525589.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:09.410Z,1520525589.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:09.801Z,1520525589.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:09.816Z,1520525589.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:10.201Z,1520525590.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:10.222Z,1520525590.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:10.593Z,1520525590.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:10.608Z,1520525590.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:10.988Z,1520525590.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:11.003Z,1520525591.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:11.398Z,1520525591.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:11.425Z,1520525591.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:11.804Z,1520525591.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:11.818Z,1520525591.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:12.201Z,1520525592.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:12.217Z,1520525592.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:12.591Z,1520525592.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:12.608Z,1520525592.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:12.992Z,1520525592.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:13.014Z,1520525593.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:13.405Z,1520525593.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:13.421Z,1520525593.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:13.801Z,1520525593.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:13.816Z,1520525593.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:14.206Z,1520525594.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:14.221Z,1520525594.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:14.591Z,1520525594.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:14.606Z,1520525594.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:14.979Z,1520525594.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:15.012Z,1520525595.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:15.397Z,1520525595.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:15.418Z,1520525595.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:15.798Z,1520525595.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:15.817Z,1520525595.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:16.202Z,1520525596.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:16.222Z,1520525596.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:16.591Z,1520525596.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:16.606Z,1520525596.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:16.976Z,1520525596.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:17.008Z,1520525597.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:17.406Z,1520525597.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:17.426Z,1520525597.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:17.805Z,1520525597.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:17.826Z,1520525597.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:18.203Z,1520525598.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:18.219Z,1520525598.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:18.583Z,1520525598.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:18.610Z,1520525598.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:18.977Z,1520525598.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:19.003Z,1520525599.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:19.402Z,1520525599.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:19.417Z,1520525599.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:19.805Z,1520525599.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:19.820Z,1520525599.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:20.202Z,1520525600.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:20.222Z,1520525600.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:20.580Z,1520525600.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:20.607Z,1520525600.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:20.982Z,1520525600.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:21.014Z,1520525601.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:21.402Z,1520525601.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:21.417Z,1520525601.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:21.789Z,1520525601.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:21.816Z,1520525601.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:22.197Z,1520525602.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:22.223Z,1520525602.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:22.583Z,1520525602.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:22.614Z,1520525602.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:22.975Z,1520525602.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:22.990Z,1520525602.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:23.389Z,1520525603.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:23.416Z,1520525603.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:23.793Z,1520525603.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:23.822Z,1520525603.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:24.193Z,1520525604.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:24.221Z,1520525604.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:24.587Z,1520525604.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:24.618Z,1520525604.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:24.979Z,1520525604.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:24.995Z,1520525604.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:25.409Z,1520525605.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:25.424Z,1520525605.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:25.807Z,1520525605.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:25.823Z,1520525605.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:26.197Z,1520525606.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:26.226Z,1520525606.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:29.629Z,1520525609.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:29.645Z,1520525609.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:29.760Z,1520525609.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:29.777Z,1520525609.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:30.142Z,1520525610.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:30.173Z,1520525610.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:30.530Z,1520525610.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:30.546Z,1520525610.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:30.943Z,1520525610.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:30.975Z,1520525610.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:31.324Z,1520525611.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:31.351Z,1520525611.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:31.726Z,1520525611.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:31.742Z,1520525611.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:32.126Z,1520525612.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:32.142Z,1520525612.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:32.534Z,1520525612.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:32.555Z,1520525612.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:32.930Z,1520525612.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:32.951Z,1520525612.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:33.342Z,1520525613.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:33.378Z,1520525613.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:33.728Z,1520525613.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:33.743Z,1520525613.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:34.127Z,1520525614.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:34.146Z,1520525614.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:34.528Z,1520525614.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:34.549Z,1520525614.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:34.929Z,1520525614.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:34.945Z,1520525614.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:35.331Z,1520525615.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:35.347Z,1520525615.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:35.734Z,1520525615.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:35.755Z,1520525615.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:36.141Z,1520525616.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:36.157Z,1520525616.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:36.534Z,1520525616.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:36.584Z,1520525616.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:36.926Z,1520525616.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:36.950Z,1520525616.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:37.331Z,1520525617.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:37.353Z,1520525617.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:37.726Z,1520525617.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:37.748Z,1520525617.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:38.127Z,1520525618.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:38.150Z,1520525618.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:38.536Z,1520525618.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:38.553Z,1520525618.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:38.937Z,1520525618.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:38.958Z,1520525618.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:39.340Z,1520525619.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:39.357Z,1520525619.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:39.731Z,1520525619.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:39.781Z,1520525619.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:40.121Z,1520525620.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:40.142Z,1520525620.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:40.527Z,1520525620.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:40.544Z,1520525620.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:40.934Z,1520525620.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:40.953Z,1520525620.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:41.331Z,1520525621.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:41.384Z,1520525621.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:41.737Z,1520525621.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:41.753Z,1520525621.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:42.137Z,1520525622.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:42.162Z,1520525622.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:42.536Z,1520525622.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:42.555Z,1520525622.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:42.931Z,1520525622.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:42.981Z,1520525622.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:43.331Z,1520525623.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:43.346Z,1520525623.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:43.732Z,1520525623.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:43.754Z,1520525623.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:44.131Z,1520525624.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:44.151Z,1520525624.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:44.542Z,1520525624.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:44.582Z,1520525624.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:44.935Z,1520525624.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:44.951Z,1520525624.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:45.341Z,1520525625.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:45.361Z,1520525625.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:45.731Z,1520525625.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:45.751Z,1520525625.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:46.116Z,1520525626.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:46.158Z,1520525626.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:46.531Z,1520525626.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:46.558Z,1520525626.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:46.931Z,1520525626.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:46.956Z,1520525626.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:47.332Z,1520525627.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:47.353Z,1520525627.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:47.741Z,1520525627.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:47.783Z,1520525627.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:48.140Z,1520525628.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:48.159Z,1520525628.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:48.538Z,1520525628.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:48.558Z,1520525628.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:48.931Z,1520525628.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:48.951Z,1520525628.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:49.326Z,1520525629.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:49.358Z,1520525629.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:49.735Z,1520525629.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:49.750Z,1520525629.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:50.130Z,1520525630.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:50.156Z,1520525630.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:50.542Z,1520525630.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:50.557Z,1520525630.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:50.938Z,1520525630.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:50.982Z,1520525630.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:51.341Z,1520525631.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:51.360Z,1520525631.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:51.730Z,1520525631.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:51.753Z,1520525631.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:52.116Z,1520525632.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:52.154Z,1520525632.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:52.531Z,1520525632.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:52.554Z,1520525632.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:52.931Z,1520525632.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:52.947Z,1520525632.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:53.331Z,1520525633.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:53.353Z,1520525633.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:53.742Z,1520525633.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:53.758Z,1520525633.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:54.141Z,1520525634.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:54.182Z,1520525634.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:54.535Z,1520525634.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:54.550Z,1520525634.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:54.930Z,1520525634.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:54.951Z,1520525634.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:55.318Z,1520525635.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:55.350Z,1520525635.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:55.732Z,1520525635.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:55.748Z,1520525635.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:56.131Z,1520525636.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:56.157Z,1520525636.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:56.543Z,1520525636.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:56.562Z,1520525636.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:56.936Z,1520525636.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:56.958Z,1520525636.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:57.341Z,1520525637.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:57.382Z,1520525637.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:57.719Z,1520525637.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:57.750Z,1520525637.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:58.113Z,1520525638.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:58.154Z,1520525638.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:58.522Z,1520525638.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:58.555Z,1520525638.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:58.919Z,1520525638.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:58.974Z,1520525638.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:59.323Z,1520525639.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:59.353Z,1520525639.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:13:59.738Z,1520525639.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:13:59.758Z,1520525639.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:00.145Z,1520525640.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:00.160Z,1520525640.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:00.538Z,1520525640.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:00.575Z,1520525640.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:00.923Z,1520525640.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:00.958Z,1520525640.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:01.319Z,1520525641.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:01.353Z,1520525641.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:01.723Z,1520525641.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:01.757Z,1520525641.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:02.119Z,1520525642.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:02.163Z,1520525642.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:02.542Z,1520525642.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:02.565Z,1520525642.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:02.938Z,1520525642.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:02.959Z,1520525642.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:03.346Z,1520525643.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:03.362Z,1520525643.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:03.719Z,1520525643.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:03.763Z,1520525643.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:04.113Z,1520525644.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:04.137Z,1520525644.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:04.522Z,1520525644.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:04.559Z,1520525644.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:04.918Z,1520525644.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:04.955Z,1520525644.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:05.323Z,1520525645.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:05.355Z,1520525645.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:05.734Z,1520525645.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:05.764Z,1520525645.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:06.157Z,1520525646.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:06.173Z,1520525646.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:06.548Z,1520525646.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:06.564Z,1520525646.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:06.927Z,1520525646.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:06.963Z,1520525646.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:07.326Z,1520525647.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:07.365Z,1520525647.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:07.725Z,1520525647.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:07.750Z,1520525647.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:08.127Z,1520525648.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:08.166Z,1520525648.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:08.538Z,1520525648.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:08.561Z,1520525648.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:08.941Z,1520525648.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:08.971Z,1520525648.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:09.338Z,1520525649.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:09.367Z,1520525649.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:09.727Z,1520525649.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:09.762Z,1520525649.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:10.127Z,1520525650.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:10.173Z,1520525650.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:10.523Z,1520525650.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:10.539Z,1520525650.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:10.926Z,1520525650.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:10.966Z,1520525650.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:11.329Z,1520525651.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:11.349Z,1520525651.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:11.730Z,1520525651.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:11.754Z,1520525651.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:12.138Z,1520525652.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:12.179Z,1520525652.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:12.538Z,1520525652.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:12.558Z,1520525652.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:12.932Z,1520525652.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:12.954Z,1520525652.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:13.328Z,1520525653.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:13.363Z,1520525653.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:13.734Z,1520525653.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:13.750Z,1520525653.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:14.133Z,1520525654.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:14.154Z,1520525654.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:14.545Z,1520525654.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:14.561Z,1520525654.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:14.941Z,1520525654.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:14.986Z,1520525654.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:15.342Z,1520525655.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:15.382Z,1520525655.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:15.732Z,1520525655.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:15.754Z,1520525655.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:16.132Z,1520525656.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:16.153Z,1520525656.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:16.531Z,1520525656.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:16.586Z,1520525656.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:16.931Z,1520525656.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:16.947Z,1520525656.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:17.331Z,1520525657.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:17.354Z,1520525657.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:17.742Z,1520525657.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:17.758Z,1520525657.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:18.137Z,1520525658.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:18.184Z,1520525658.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:18.542Z,1520525658.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:18.563Z,1520525658.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:18.930Z,1520525658.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:18.954Z,1520525658.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:19.330Z,1520525659.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:19.350Z,1520525659.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:19.732Z,1520525659.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:19.749Z,1520525659.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:20.127Z,1520525660.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:20.143Z,1520525660.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:20.541Z,1520525660.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:20.560Z,1520525660.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:20.942Z,1520525660.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:20.958Z,1520525660.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:21.338Z,1520525661.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:21.384Z,1520525661.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:21.730Z,1520525661.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:21.746Z,1520525661.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:22.131Z,1520525662.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:22.153Z,1520525662.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:22.528Z,1520525662.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:22.549Z,1520525662.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:22.927Z,1520525662.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:22.950Z,1520525662.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:23.332Z,1520525663.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:23.348Z,1520525663.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:23.740Z,1520525663.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:23.760Z,1520525663.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:24.144Z,1520525664.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:24.159Z,1520525664.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:24.542Z,1520525664.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:24.583Z,1520525664.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:24.931Z,1520525664.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:24.957Z,1520525664.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:25.327Z,1520525665.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:25.345Z,1520525665.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:25.734Z,1520525665.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:25.753Z,1520525665.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:26.127Z,1520525666.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:26.189Z,1520525666.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:26.542Z,1520525666.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:26.566Z,1520525666.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:29.639Z,1520525669.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:29.655Z,1520525669.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:29.758Z,1520525669.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:29.791Z,1520525669.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:30.107Z,1520525670.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:30.151Z,1520525670.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:30.508Z,1520525670.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:30.523Z,1520525670.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:30.904Z,1520525670.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:30.926Z,1520525670.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:31.310Z,1520525671.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:31.326Z,1520525671.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:31.725Z,1520525671.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:31.761Z,1520525671.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:32.110Z,1520525672.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:32.126Z,1520525672.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:32.525Z,1520525672.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:32.557Z,1520525672.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:32.917Z,1520525672.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:32.932Z,1520525672.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:33.314Z,1520525673.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:33.329Z,1520525673.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:33.710Z,1520525673.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:33.729Z,1520525673.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:34.112Z,1520525674.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:34.128Z,1520525674.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:34.516Z,1520525674.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:34.539Z,1520525674.539 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:34.539Z,1520525674.539 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 170
2018-03-08T16:14:34.539Z,1520525674.539 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T16:14:34.541Z,1520525674.541 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:34.541Z,1520525674.541 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 170
2018-03-08T16:14:34.541Z,1520525674.541 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T16:14:34.543Z,1520525674.543 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:34.543Z,1520525674.543 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 170
2018-03-08T16:14:34.543Z,1520525674.543 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T16:14:34.581Z,1520525674.581 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T16:14:34.581Z,1520525674.581 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T16:14:34.581Z,1520525674.581 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T16:14:34.922Z,1520525674.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:34.980Z,1520525674.980 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T16:14:34.980Z,1520525674.980 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 170
2018-03-08T16:14:34.980Z,1520525674.980 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T16:14:34.980Z,1520525674.980 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 170
2018-03-08T16:14:34.985Z,1520525674.985 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T16:14:34.985Z,1520525674.985 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 170
2018-03-08T16:14:35.326Z,1520525675.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:35.346Z,1520525675.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T16:14:35.347Z,1520525675.347 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:14:35.347Z,1520525675.347 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:14:35.347Z,1520525675.347 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T16:14:35.348Z,1520525675.348 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:14:35.348Z,1520525675.348 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:14:35.349Z,1520525675.349 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T16:14:35.349Z,1520525675.349 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:14:35.349Z,1520525675.349 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:14:35.700Z,1520525675.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:35.727Z,1520525675.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T16:14:35.728Z,1520525675.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:36.106Z,1520525676.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:36.138Z,1520525676.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T16:14:36.139Z,1520525676.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:36.503Z,1520525676.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:36.530Z,1520525676.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T16:14:36.531Z,1520525676.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:36.902Z,1520525676.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:36.922Z,1520525676.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T16:14:36.923Z,1520525676.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:37.310Z,1520525677.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:37.350Z,1520525677.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T16:14:37.351Z,1520525677.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:37.725Z,1520525677.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:37.751Z,1520525677.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T16:14:37.752Z,1520525677.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:38.117Z,1520525678.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:38.132Z,1520525678.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T16:14:38.158Z,1520525678.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:38.525Z,1520525678.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:38.546Z,1520525678.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T16:14:38.547Z,1520525678.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:38.917Z,1520525678.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:38.932Z,1520525678.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T16:14:38.934Z,1520525678.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:39.299Z,1520525679.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:39.330Z,1520525679.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T16:14:39.331Z,1520525679.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:39.707Z,1520525679.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:39.730Z,1520525679.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T16:14:39.731Z,1520525679.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:40.116Z,1520525680.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:40.130Z,1520525680.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T16:14:40.131Z,1520525680.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:40.524Z,1520525680.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:40.540Z,1520525680.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T16:14:40.541Z,1520525680.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:40.924Z,1520525680.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:40.940Z,1520525680.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T16:14:40.941Z,1520525680.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:41.325Z,1520525681.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:41.340Z,1520525681.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T16:14:41.341Z,1520525681.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:41.709Z,1520525681.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:41.727Z,1520525681.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T16:14:41.728Z,1520525681.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:42.119Z,1520525682.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:42.134Z,1520525682.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T16:14:42.135Z,1520525682.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:42.507Z,1520525682.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:42.530Z,1520525682.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T16:14:42.531Z,1520525682.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:42.899Z,1520525682.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:42.934Z,1520525682.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T16:14:42.935Z,1520525682.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:43.310Z,1520525683.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:43.330Z,1520525683.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T16:14:43.331Z,1520525683.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:43.726Z,1520525683.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:43.746Z,1520525683.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T16:14:43.747Z,1520525683.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:44.121Z,1520525684.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:44.137Z,1520525684.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T16:14:44.138Z,1520525684.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:44.533Z,1520525684.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:44.556Z,1520525684.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T16:14:44.557Z,1520525684.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:44.903Z,1520525684.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:44.946Z,1520525684.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T16:14:44.947Z,1520525684.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:45.307Z,1520525685.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:45.339Z,1520525685.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T16:14:45.340Z,1520525685.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:45.704Z,1520525685.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:45.731Z,1520525685.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T16:14:45.732Z,1520525685.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:46.102Z,1520525686.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:46.143Z,1520525686.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T16:14:46.145Z,1520525686.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:46.517Z,1520525686.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:46.555Z,1520525686.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T16:14:46.556Z,1520525686.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:46.932Z,1520525686.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:46.948Z,1520525686.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T16:14:46.949Z,1520525686.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:47.321Z,1520525687.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:47.347Z,1520525687.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T16:14:47.348Z,1520525687.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:47.709Z,1520525687.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:47.724Z,1520525687.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T16:14:47.737Z,1520525687.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:48.112Z,1520525688.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:48.155Z,1520525688.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T16:14:48.157Z,1520525688.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:48.509Z,1520525688.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:48.525Z,1520525688.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T16:14:48.526Z,1520525688.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:48.905Z,1520525688.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:48.921Z,1520525688.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T16:14:48.922Z,1520525688.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:49.308Z,1520525689.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:49.331Z,1520525689.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T16:14:49.337Z,1520525689.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:49.717Z,1520525689.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:49.735Z,1520525689.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T16:14:49.753Z,1520525689.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:50.126Z,1520525690.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:50.159Z,1520525690.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T16:14:50.161Z,1520525690.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:50.513Z,1520525690.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:50.530Z,1520525690.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T16:14:50.531Z,1520525690.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:50.911Z,1520525690.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:50.944Z,1520525690.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T16:14:50.953Z,1520525690.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:51.315Z,1520525691.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:51.330Z,1520525691.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T16:14:51.331Z,1520525691.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:51.715Z,1520525691.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:51.730Z,1520525691.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T16:14:51.731Z,1520525691.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:52.107Z,1520525692.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:52.126Z,1520525692.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T16:14:52.127Z,1520525692.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:52.517Z,1520525692.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:52.532Z,1520525692.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T16:14:52.533Z,1520525692.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:52.920Z,1520525692.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:52.944Z,1520525692.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T16:14:52.945Z,1520525692.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:53.325Z,1520525693.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:53.340Z,1520525693.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T16:14:53.341Z,1520525693.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:53.715Z,1520525693.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:53.730Z,1520525693.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T16:14:53.731Z,1520525693.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:54.107Z,1520525694.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:54.129Z,1520525694.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T16:14:54.130Z,1520525694.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:54.499Z,1520525694.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:54.534Z,1520525694.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T16:14:54.536Z,1520525694.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:54.916Z,1520525694.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:54.931Z,1520525694.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:55.307Z,1520525695.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:55.330Z,1520525695.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:55.721Z,1520525695.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:55.737Z,1520525695.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:56.125Z,1520525696.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:56.146Z,1520525696.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:56.525Z,1520525696.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:56.541Z,1520525696.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:56.899Z,1520525696.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:56.934Z,1520525696.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:57.299Z,1520525697.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:57.325Z,1520525697.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:57.703Z,1520525697.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:57.743Z,1520525697.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:58.107Z,1520525698.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:58.135Z,1520525698.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:58.525Z,1520525698.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:58.541Z,1520525698.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:58.929Z,1520525698.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:58.951Z,1520525698.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:59.325Z,1520525699.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:59.346Z,1520525699.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:14:59.707Z,1520525699.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:14:59.734Z,1520525699.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:00.102Z,1520525700.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:00.139Z,1520525700.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:00.507Z,1520525700.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:00.534Z,1520525700.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:00.906Z,1520525700.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:00.935Z,1520525700.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:01.303Z,1520525701.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:01.329Z,1520525701.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:01.726Z,1520525701.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:01.742Z,1520525701.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:02.129Z,1520525702.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:02.151Z,1520525702.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:02.521Z,1520525702.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:02.542Z,1520525702.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:02.899Z,1520525702.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:02.931Z,1520525702.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:03.307Z,1520525703.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:03.334Z,1520525703.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:03.703Z,1520525703.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:03.730Z,1520525703.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:04.099Z,1520525704.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:04.131Z,1520525704.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:04.525Z,1520525704.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:04.541Z,1520525704.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:04.921Z,1520525704.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:04.945Z,1520525704.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:05.326Z,1520525705.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:05.342Z,1520525705.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:05.707Z,1520525705.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:05.744Z,1520525705.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:06.106Z,1520525706.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:06.142Z,1520525706.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:06.507Z,1520525706.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:06.547Z,1520525706.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:06.906Z,1520525706.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:06.945Z,1520525706.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:07.310Z,1520525707.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:07.350Z,1520525707.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:07.721Z,1520525707.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:07.747Z,1520525707.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:08.117Z,1520525708.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:08.162Z,1520525708.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:08.517Z,1520525708.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:08.542Z,1520525708.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:08.910Z,1520525708.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:08.955Z,1520525708.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:09.311Z,1520525709.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:09.345Z,1520525709.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:09.712Z,1520525709.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:09.744Z,1520525709.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:10.107Z,1520525710.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:10.122Z,1520525710.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:10.521Z,1520525710.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:10.555Z,1520525710.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:10.925Z,1520525710.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:10.957Z,1520525710.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:11.313Z,1520525711.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:11.335Z,1520525711.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:11.706Z,1520525711.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:11.723Z,1520525711.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:12.109Z,1520525712.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:12.125Z,1520525712.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:12.512Z,1520525712.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:12.527Z,1520525712.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:12.911Z,1520525712.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:12.926Z,1520525712.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:13.307Z,1520525713.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:13.336Z,1520525713.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:13.725Z,1520525713.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:13.762Z,1520525713.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:14.125Z,1520525714.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:14.157Z,1520525714.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:14.518Z,1520525714.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:14.533Z,1520525714.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:14.914Z,1520525714.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:14.929Z,1520525714.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:15.314Z,1520525715.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:15.330Z,1520525715.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:15.715Z,1520525715.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:15.735Z,1520525715.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:16.115Z,1520525716.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:16.130Z,1520525716.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:16.521Z,1520525716.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:16.539Z,1520525716.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:16.920Z,1520525716.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:16.938Z,1520525716.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:17.321Z,1520525717.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:17.336Z,1520525717.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:17.715Z,1520525717.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:17.730Z,1520525717.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:18.107Z,1520525718.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:18.130Z,1520525718.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:18.515Z,1520525718.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:18.531Z,1520525718.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:18.913Z,1520525718.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:18.929Z,1520525718.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:19.309Z,1520525719.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:19.337Z,1520525719.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:19.726Z,1520525719.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:19.741Z,1520525719.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:20.129Z,1520525720.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:20.150Z,1520525720.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:20.525Z,1520525720.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:20.541Z,1520525720.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:20.899Z,1520525720.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:20.931Z,1520525720.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:21.307Z,1520525721.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:21.335Z,1520525721.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:21.703Z,1520525721.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:21.730Z,1520525721.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:22.099Z,1520525722.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:22.130Z,1520525722.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:22.526Z,1520525722.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:22.542Z,1520525722.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:22.926Z,1520525722.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:22.941Z,1520525722.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:23.323Z,1520525723.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:23.358Z,1520525723.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:23.707Z,1520525723.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:23.735Z,1520525723.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:24.104Z,1520525724.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:24.132Z,1520525724.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:24.503Z,1520525724.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:24.546Z,1520525724.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:24.898Z,1520525724.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:24.922Z,1520525724.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:25.311Z,1520525725.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:25.339Z,1520525725.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:25.732Z,1520525725.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:25.756Z,1520525725.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:26.110Z,1520525726.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:26.149Z,1520525726.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:26.527Z,1520525726.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:26.548Z,1520525726.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:26.907Z,1520525726.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:26.937Z,1520525726.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:27.307Z,1520525727.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:27.335Z,1520525727.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:30.423Z,1520525730.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:30.438Z,1520525730.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:30.535Z,1520525730.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:30.586Z,1520525730.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:30.906Z,1520525730.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:30.938Z,1520525730.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:31.309Z,1520525731.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:31.339Z,1520525731.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:31.701Z,1520525731.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:31.733Z,1520525731.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:32.095Z,1520525732.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:32.110Z,1520525732.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:32.495Z,1520525732.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:32.518Z,1520525732.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:32.889Z,1520525732.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:32.905Z,1520525732.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:33.295Z,1520525733.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:33.310Z,1520525733.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:33.701Z,1520525733.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:33.716Z,1520525733.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:34.098Z,1520525734.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:34.121Z,1520525734.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:34.504Z,1520525734.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:34.520Z,1520525734.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:34.895Z,1520525734.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:34.910Z,1520525734.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:35.295Z,1520525735.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:35.310Z,1520525735.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:35.694Z,1520525735.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:35.714Z,1520525735.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:36.099Z,1520525736.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:36.114Z,1520525736.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:36.504Z,1520525736.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:36.520Z,1520525736.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:36.905Z,1520525736.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:36.920Z,1520525736.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:37.304Z,1520525737.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:37.319Z,1520525737.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:37.688Z,1520525737.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:37.718Z,1520525737.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:38.099Z,1520525738.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:38.118Z,1520525738.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:38.501Z,1520525738.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:38.516Z,1520525738.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:38.888Z,1520525738.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:38.915Z,1520525738.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:39.299Z,1520525739.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:39.318Z,1520525739.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:39.709Z,1520525739.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:39.730Z,1520525739.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:40.101Z,1520525740.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:40.122Z,1520525740.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:40.509Z,1520525740.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:40.530Z,1520525740.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:40.899Z,1520525740.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:40.914Z,1520525740.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:41.299Z,1520525741.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:41.318Z,1520525741.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:41.687Z,1520525741.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:41.722Z,1520525741.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:42.100Z,1520525742.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:42.114Z,1520525742.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:42.502Z,1520525742.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:42.524Z,1520525742.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:42.909Z,1520525742.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:42.924Z,1520525742.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:43.310Z,1520525743.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:43.330Z,1520525743.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:43.681Z,1520525743.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:43.715Z,1520525743.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:44.090Z,1520525744.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:44.117Z,1520525744.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:44.487Z,1520525744.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:44.513Z,1520525744.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:44.885Z,1520525744.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:44.911Z,1520525744.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:45.286Z,1520525745.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:45.323Z,1520525745.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:45.714Z,1520525745.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:45.729Z,1520525745.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:46.093Z,1520525746.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:46.120Z,1520525746.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:46.497Z,1520525746.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:46.530Z,1520525746.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:46.887Z,1520525746.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:46.925Z,1520525746.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:47.291Z,1520525747.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:47.322Z,1520525747.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:47.691Z,1520525747.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:47.723Z,1520525747.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:48.088Z,1520525748.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:48.125Z,1520525748.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:48.509Z,1520525748.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:48.525Z,1520525748.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:48.909Z,1520525748.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:48.925Z,1520525748.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:49.310Z,1520525749.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:49.330Z,1520525749.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:49.684Z,1520525749.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:49.699Z,1520525749.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:50.090Z,1520525750.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:50.123Z,1520525750.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:50.491Z,1520525750.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:50.506Z,1520525750.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:50.889Z,1520525750.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:50.905Z,1520525750.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:51.291Z,1520525751.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:51.310Z,1520525751.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:51.709Z,1520525751.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:51.735Z,1520525751.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:52.097Z,1520525752.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:52.113Z,1520525752.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:52.509Z,1520525752.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:52.541Z,1520525752.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:52.892Z,1520525752.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:52.916Z,1520525752.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:53.295Z,1520525753.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:53.318Z,1520525753.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:53.697Z,1520525753.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:53.712Z,1520525753.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:54.094Z,1520525754.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:54.113Z,1520525754.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:54.497Z,1520525754.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:54.513Z,1520525754.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:54.902Z,1520525754.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:54.917Z,1520525754.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:55.305Z,1520525755.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:55.321Z,1520525755.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:55.699Z,1520525755.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:55.715Z,1520525755.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:56.099Z,1520525756.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:56.114Z,1520525756.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:56.489Z,1520525756.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:56.523Z,1520525756.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:56.900Z,1520525756.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:56.916Z,1520525756.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:57.299Z,1520525757.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:57.314Z,1520525757.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:57.706Z,1520525757.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:57.727Z,1520525757.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:58.105Z,1520525758.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:58.121Z,1520525758.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:58.505Z,1520525758.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:58.520Z,1520525758.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:58.901Z,1520525758.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:58.916Z,1520525758.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:59.293Z,1520525759.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:59.314Z,1520525759.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:15:59.695Z,1520525759.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:15:59.716Z,1520525759.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:00.093Z,1520525760.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:00.121Z,1520525760.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:00.509Z,1520525760.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:00.524Z,1520525760.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:00.909Z,1520525760.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:00.924Z,1520525760.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:01.310Z,1520525761.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:01.330Z,1520525761.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:01.700Z,1520525761.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:01.716Z,1520525761.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:02.086Z,1520525762.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:02.121Z,1520525762.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:02.505Z,1520525762.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:02.521Z,1520525762.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:02.887Z,1520525762.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:02.927Z,1520525762.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:03.300Z,1520525763.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:03.316Z,1520525763.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:03.713Z,1520525763.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:03.736Z,1520525763.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:04.113Z,1520525764.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:04.135Z,1520525764.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:04.511Z,1520525764.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:04.527Z,1520525764.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:04.883Z,1520525764.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:04.919Z,1520525764.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:05.291Z,1520525765.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:05.318Z,1520525765.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:05.688Z,1520525765.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:05.728Z,1520525765.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:06.083Z,1520525766.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:06.123Z,1520525766.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:06.512Z,1520525766.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:06.527Z,1520525766.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:06.915Z,1520525766.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:06.930Z,1520525766.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:07.311Z,1520525767.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:07.326Z,1520525767.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:07.683Z,1520525767.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:07.718Z,1520525767.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:08.091Z,1520525768.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:08.119Z,1520525768.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:08.483Z,1520525768.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:08.519Z,1520525768.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:08.891Z,1520525768.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:08.923Z,1520525768.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:09.287Z,1520525769.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:09.319Z,1520525769.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:09.701Z,1520525769.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:09.729Z,1520525769.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:10.101Z,1520525770.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:10.128Z,1520525770.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:10.497Z,1520525770.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:10.523Z,1520525770.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:10.887Z,1520525770.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:10.929Z,1520525770.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:11.291Z,1520525771.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:11.323Z,1520525771.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:11.691Z,1520525771.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:11.707Z,1520525771.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:12.094Z,1520525772.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:12.109Z,1520525772.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:12.505Z,1520525772.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:12.529Z,1520525772.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:12.905Z,1520525772.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:12.928Z,1520525772.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:13.304Z,1520525773.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:13.332Z,1520525773.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:13.691Z,1520525773.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:13.710Z,1520525773.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:14.093Z,1520525774.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:14.108Z,1520525774.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:14.493Z,1520525774.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:14.508Z,1520525774.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:14.895Z,1520525774.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:14.914Z,1520525774.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:15.295Z,1520525775.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:15.311Z,1520525775.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:15.709Z,1520525775.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:15.741Z,1520525775.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:16.110Z,1520525776.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:16.145Z,1520525776.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:16.509Z,1520525776.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:16.541Z,1520525776.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:16.896Z,1520525776.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:16.911Z,1520525776.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:17.294Z,1520525777.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:17.309Z,1520525777.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:17.694Z,1520525777.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:17.713Z,1520525777.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:18.095Z,1520525778.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:18.110Z,1520525778.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:18.509Z,1520525778.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:18.540Z,1520525778.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:18.902Z,1520525778.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:18.917Z,1520525778.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:19.308Z,1520525779.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:19.323Z,1520525779.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:19.697Z,1520525779.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:19.713Z,1520525779.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:20.095Z,1520525780.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:20.110Z,1520525780.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:20.495Z,1520525780.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:20.510Z,1520525780.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:20.899Z,1520525780.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:20.922Z,1520525780.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:21.295Z,1520525781.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:21.310Z,1520525781.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:21.701Z,1520525781.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:21.716Z,1520525781.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:22.105Z,1520525782.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:22.121Z,1520525782.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:22.504Z,1520525782.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:22.519Z,1520525782.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:22.896Z,1520525782.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:22.910Z,1520525782.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:23.299Z,1520525783.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:23.314Z,1520525783.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:23.697Z,1520525783.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:23.712Z,1520525783.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:24.091Z,1520525784.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:24.110Z,1520525784.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:24.505Z,1520525784.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:24.521Z,1520525784.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:24.904Z,1520525784.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:24.919Z,1520525784.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:25.305Z,1520525785.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:25.319Z,1520525785.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:25.695Z,1520525785.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:25.711Z,1520525785.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:26.089Z,1520525786.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:26.117Z,1520525786.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:26.120Z,1520525786.120 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T16:16:26.120Z,1520525786.120 [Default:CheckIn:C.Wait] Stopped
2018-03-08T16:16:26.120Z,1520525786.120 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T16:16:26.120Z,1520525786.120 [Default:CheckIn:D] Running Loop=1
2018-03-08T16:16:26.500Z,1520525786.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:26.515Z,1520525786.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:26.518Z,1520525786.518 [Default:CheckIn:D] Stopped
2018-03-08T16:16:26.518Z,1520525786.518 [Default:CheckIn:E] Running Loop=1
2018-03-08T16:16:26.900Z,1520525786.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:26.916Z,1520525786.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:26.919Z,1520525786.919 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 510.695215 min 
2018-03-08T16:16:26.919Z,1520525786.919 [Default:CheckIn:E] Stopped
2018-03-08T16:16:26.919Z,1520525786.919 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T16:16:26.919Z,1520525786.919 [Default:CheckIn] Stopped
2018-03-08T16:16:26.919Z,1520525786.919 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T16:16:26.920Z,1520525786.920 [Default:CheckIn](INFO): Running loop #50
2018-03-08T16:16:26.920Z,1520525786.920 [Default:CheckIn] Running Loop=50
2018-03-08T16:16:26.920Z,1520525786.920 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T16:16:26.920Z,1520525786.920 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T16:16:27.291Z,1520525787.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:27.313Z,1520525787.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:30.406Z,1520525790.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:30.427Z,1520525790.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:30.540Z,1520525790.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:30.567Z,1520525790.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:30.913Z,1520525790.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:30.954Z,1520525790.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:31.308Z,1520525791.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:31.323Z,1520525791.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:31.712Z,1520525791.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:31.728Z,1520525791.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:32.107Z,1520525792.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:32.122Z,1520525792.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:32.514Z,1520525792.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:32.529Z,1520525792.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:32.917Z,1520525792.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:32.933Z,1520525792.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:33.316Z,1520525793.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:33.331Z,1520525793.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:33.711Z,1520525793.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:33.726Z,1520525793.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:34.111Z,1520525794.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:34.130Z,1520525794.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:34.510Z,1520525794.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:34.526Z,1520525794.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:34.904Z,1520525794.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:34.919Z,1520525794.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:35.308Z,1520525795.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:35.323Z,1520525795.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:35.716Z,1520525795.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:35.731Z,1520525795.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:36.117Z,1520525796.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:36.132Z,1520525796.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:36.516Z,1520525796.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:36.539Z,1520525796.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:36.914Z,1520525796.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:36.929Z,1520525796.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:37.304Z,1520525797.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:37.320Z,1520525797.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:37.712Z,1520525797.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:37.727Z,1520525797.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:38.105Z,1520525798.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:38.125Z,1520525798.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:38.522Z,1520525798.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:38.542Z,1520525798.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:38.920Z,1520525798.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:38.939Z,1520525798.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:39.317Z,1520525799.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:39.333Z,1520525799.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:39.708Z,1520525799.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:39.723Z,1520525799.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:40.113Z,1520525800.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:40.129Z,1520525800.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:40.511Z,1520525800.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:40.527Z,1520525800.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:40.896Z,1520525800.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:40.931Z,1520525800.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:41.312Z,1520525801.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:41.327Z,1520525801.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:41.718Z,1520525801.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:41.734Z,1520525801.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:42.121Z,1520525802.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:42.137Z,1520525802.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:42.521Z,1520525802.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:42.537Z,1520525802.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:42.910Z,1520525802.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:42.926Z,1520525802.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:43.294Z,1520525803.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:43.332Z,1520525803.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:43.708Z,1520525803.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:43.727Z,1520525803.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:44.107Z,1520525804.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:44.127Z,1520525804.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:44.521Z,1520525804.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:44.538Z,1520525804.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:44.922Z,1520525804.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:44.944Z,1520525804.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:45.320Z,1520525805.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:45.336Z,1520525805.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:45.710Z,1520525805.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:45.725Z,1520525805.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:46.105Z,1520525806.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:46.124Z,1520525806.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:46.505Z,1520525806.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:46.526Z,1520525806.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:46.895Z,1520525806.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:46.925Z,1520525806.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:47.311Z,1520525807.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:47.327Z,1520525807.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:47.721Z,1520525807.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:47.737Z,1520525807.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:48.121Z,1520525808.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:48.142Z,1520525808.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:48.510Z,1520525808.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:48.534Z,1520525808.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:48.910Z,1520525808.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:48.926Z,1520525808.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:49.295Z,1520525809.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:49.330Z,1520525809.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:49.698Z,1520525809.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:49.738Z,1520525809.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:50.111Z,1520525810.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:50.131Z,1520525810.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:50.518Z,1520525810.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:50.533Z,1520525810.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:50.917Z,1520525810.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:50.933Z,1520525810.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:51.321Z,1520525811.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:51.341Z,1520525811.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:51.711Z,1520525811.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:51.727Z,1520525811.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:52.096Z,1520525812.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:52.130Z,1520525812.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:52.499Z,1520525812.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:52.535Z,1520525812.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:52.903Z,1520525812.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:52.930Z,1520525812.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:53.302Z,1520525813.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:53.329Z,1520525813.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:53.717Z,1520525813.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:53.736Z,1520525813.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:54.122Z,1520525814.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:54.137Z,1520525814.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:54.513Z,1520525814.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:54.542Z,1520525814.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:54.903Z,1520525814.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:54.929Z,1520525814.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:55.295Z,1520525815.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:55.342Z,1520525815.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:55.707Z,1520525815.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:55.723Z,1520525815.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:56.106Z,1520525816.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:56.126Z,1520525816.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:56.522Z,1520525816.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:56.553Z,1520525816.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:56.905Z,1520525816.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:56.921Z,1520525816.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:57.321Z,1520525817.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:57.359Z,1520525817.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:57.710Z,1520525817.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:57.725Z,1520525817.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:58.104Z,1520525818.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:58.119Z,1520525818.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:58.506Z,1520525818.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:58.527Z,1520525818.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:58.911Z,1520525818.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:58.926Z,1520525818.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:59.311Z,1520525819.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:59.327Z,1520525819.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:16:59.713Z,1520525819.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:16:59.729Z,1520525819.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:00.113Z,1520525820.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:00.135Z,1520525820.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:00.517Z,1520525820.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:00.532Z,1520525820.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:00.907Z,1520525820.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:00.922Z,1520525820.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:01.307Z,1520525821.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:01.323Z,1520525821.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:01.710Z,1520525821.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:01.760Z,1520525821.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:02.107Z,1520525822.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:02.126Z,1520525822.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:02.531Z,1520525822.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:02.585Z,1520525822.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:02.912Z,1520525822.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:02.946Z,1520525822.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:03.311Z,1520525823.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:03.347Z,1520525823.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:03.700Z,1520525823.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:03.747Z,1520525823.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:04.101Z,1520525824.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:04.117Z,1520525824.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:04.506Z,1520525824.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:04.543Z,1520525824.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:04.909Z,1520525824.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:04.923Z,1520525824.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:05.303Z,1520525825.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:05.319Z,1520525825.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:05.721Z,1520525825.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:05.757Z,1520525825.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:06.113Z,1520525826.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:06.128Z,1520525826.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:06.513Z,1520525826.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:06.528Z,1520525826.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:06.911Z,1520525826.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:06.926Z,1520525826.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:07.307Z,1520525827.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:07.322Z,1520525827.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:07.706Z,1520525827.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:07.725Z,1520525827.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:08.105Z,1520525828.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:08.121Z,1520525828.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:08.513Z,1520525828.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:08.535Z,1520525828.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:08.912Z,1520525828.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:08.928Z,1520525828.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:09.316Z,1520525829.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:09.331Z,1520525829.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:09.711Z,1520525829.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:09.726Z,1520525829.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:10.097Z,1520525830.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:10.119Z,1520525830.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:10.503Z,1520525830.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:10.524Z,1520525830.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:10.913Z,1520525830.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:10.928Z,1520525830.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:11.310Z,1520525831.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:11.330Z,1520525831.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:11.716Z,1520525831.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:11.732Z,1520525831.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:12.116Z,1520525832.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:12.131Z,1520525832.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:12.512Z,1520525832.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:12.527Z,1520525832.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:12.907Z,1520525832.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:12.923Z,1520525832.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:13.303Z,1520525833.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:13.318Z,1520525833.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:13.704Z,1520525833.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:13.719Z,1520525833.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:14.103Z,1520525834.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:14.124Z,1520525834.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:14.516Z,1520525834.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:14.531Z,1520525834.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:14.917Z,1520525834.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:14.939Z,1520525834.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:15.316Z,1520525835.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:15.331Z,1520525835.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:15.712Z,1520525835.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:15.727Z,1520525835.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:16.100Z,1520525836.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:16.128Z,1520525836.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:16.511Z,1520525836.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:16.530Z,1520525836.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:16.895Z,1520525836.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:16.931Z,1520525836.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:17.311Z,1520525837.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:17.326Z,1520525837.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:17.725Z,1520525837.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:17.741Z,1520525837.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:18.122Z,1520525838.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:18.137Z,1520525838.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:18.514Z,1520525838.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:18.538Z,1520525838.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:18.899Z,1520525838.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:18.926Z,1520525838.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:19.299Z,1520525839.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:19.338Z,1520525839.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:19.703Z,1520525839.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:19.734Z,1520525839.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:20.102Z,1520525840.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:20.137Z,1520525840.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:20.523Z,1520525840.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:20.539Z,1520525840.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:20.916Z,1520525840.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:20.939Z,1520525840.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:21.318Z,1520525841.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:21.339Z,1520525841.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:21.703Z,1520525841.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:21.730Z,1520525841.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:22.097Z,1520525842.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:22.125Z,1520525842.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:22.500Z,1520525842.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:22.539Z,1520525842.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:22.904Z,1520525842.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:22.935Z,1520525842.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:23.302Z,1520525843.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:23.347Z,1520525843.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:23.710Z,1520525843.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:23.737Z,1520525843.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:24.109Z,1520525844.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:24.144Z,1520525844.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:24.510Z,1520525844.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:24.548Z,1520525844.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:24.903Z,1520525844.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:24.938Z,1520525844.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:25.303Z,1520525845.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:25.336Z,1520525845.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:25.703Z,1520525845.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:25.735Z,1520525845.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:26.098Z,1520525846.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:26.135Z,1520525846.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:26.513Z,1520525846.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:26.547Z,1520525846.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:26.905Z,1520525846.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:26.937Z,1520525846.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:27.317Z,1520525847.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:27.350Z,1520525847.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:30.402Z,1520525850.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:30.418Z,1520525850.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:30.513Z,1520525850.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:30.550Z,1520525850.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:30.909Z,1520525850.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:30.937Z,1520525850.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:31.313Z,1520525851.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:31.356Z,1520525851.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:31.705Z,1520525851.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:31.721Z,1520525851.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:32.102Z,1520525852.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:32.122Z,1520525852.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:32.502Z,1520525852.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:32.517Z,1520525852.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:32.897Z,1520525852.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:32.912Z,1520525852.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:33.293Z,1520525853.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:33.323Z,1520525853.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:33.705Z,1520525853.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:33.720Z,1520525853.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:34.104Z,1520525854.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:34.120Z,1520525854.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:34.505Z,1520525854.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:34.521Z,1520525854.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:34.901Z,1520525854.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:34.916Z,1520525854.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:35.296Z,1520525855.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:35.311Z,1520525855.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:35.697Z,1520525855.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:35.717Z,1520525855.717 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:35.717Z,1520525855.717 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 171
2018-03-08T16:17:35.717Z,1520525855.717 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T16:17:35.719Z,1520525855.719 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:35.719Z,1520525855.719 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 171
2018-03-08T16:17:35.719Z,1520525855.719 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T16:17:35.721Z,1520525855.721 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:35.721Z,1520525855.721 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 171
2018-03-08T16:17:35.721Z,1520525855.721 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T16:17:35.741Z,1520525855.741 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T16:17:35.741Z,1520525855.741 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T16:17:35.741Z,1520525855.741 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T16:17:36.099Z,1520525856.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:36.128Z,1520525856.128 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T16:17:36.128Z,1520525856.128 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 171
2018-03-08T16:17:36.129Z,1520525856.129 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T16:17:36.129Z,1520525856.129 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 171
2018-03-08T16:17:36.129Z,1520525856.129 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T16:17:36.129Z,1520525856.129 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 171
2018-03-08T16:17:36.506Z,1520525856.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:36.528Z,1520525856.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T16:17:36.533Z,1520525856.533 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:17:36.534Z,1520525856.534 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:17:36.534Z,1520525856.534 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T16:17:36.535Z,1520525856.535 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:17:36.535Z,1520525856.535 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:17:36.535Z,1520525856.535 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T16:17:36.536Z,1520525856.536 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:17:36.536Z,1520525856.536 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:17:36.920Z,1520525856.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:36.939Z,1520525856.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T16:17:36.940Z,1520525856.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:37.313Z,1520525857.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:37.327Z,1520525857.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T16:17:37.328Z,1520525857.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:37.685Z,1520525857.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:37.700Z,1520525857.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T16:17:37.709Z,1520525857.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:38.098Z,1520525858.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:38.124Z,1520525858.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T16:17:38.125Z,1520525858.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:38.491Z,1520525858.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:38.526Z,1520525858.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T16:17:38.527Z,1520525858.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:38.895Z,1520525858.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:38.932Z,1520525858.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T16:17:38.933Z,1520525858.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:39.294Z,1520525859.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:39.326Z,1520525859.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T16:17:39.327Z,1520525859.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:39.722Z,1520525859.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:39.737Z,1520525859.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T16:17:39.738Z,1520525859.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:40.101Z,1520525860.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:40.138Z,1520525860.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T16:17:40.139Z,1520525860.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:40.509Z,1520525860.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:40.539Z,1520525860.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T16:17:40.539Z,1520525860.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:40.894Z,1520525860.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:40.909Z,1520525860.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T16:17:40.910Z,1520525860.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:41.295Z,1520525861.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:41.314Z,1520525861.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T16:17:41.315Z,1520525861.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:41.700Z,1520525861.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:41.715Z,1520525861.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T16:17:41.716Z,1520525861.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:42.096Z,1520525862.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:42.110Z,1520525862.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T16:17:42.111Z,1520525862.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:42.501Z,1520525862.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:42.516Z,1520525862.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T16:17:42.517Z,1520525862.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:42.917Z,1520525862.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:42.948Z,1520525862.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T16:17:42.950Z,1520525862.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:43.317Z,1520525863.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:43.347Z,1520525863.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T16:17:43.348Z,1520525863.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:43.692Z,1520525863.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:43.718Z,1520525863.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T16:17:43.719Z,1520525863.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:44.100Z,1520525864.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:44.114Z,1520525864.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T16:17:44.115Z,1520525864.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:44.500Z,1520525864.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:44.515Z,1520525864.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T16:17:44.517Z,1520525864.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:44.897Z,1520525864.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:44.912Z,1520525864.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T16:17:44.913Z,1520525864.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:45.299Z,1520525865.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:45.314Z,1520525865.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T16:17:45.315Z,1520525865.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:45.717Z,1520525865.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:45.754Z,1520525865.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T16:17:45.755Z,1520525865.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:46.101Z,1520525866.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:46.116Z,1520525866.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T16:17:46.117Z,1520525866.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:46.517Z,1520525866.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:46.547Z,1520525866.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T16:17:46.549Z,1520525866.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:46.900Z,1520525866.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:46.915Z,1520525866.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T16:17:46.916Z,1520525866.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:47.298Z,1520525867.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:47.313Z,1520525867.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T16:17:47.314Z,1520525867.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:47.705Z,1520525867.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:47.720Z,1520525867.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T16:17:47.721Z,1520525867.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:48.104Z,1520525868.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:48.119Z,1520525868.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T16:17:48.120Z,1520525868.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:48.503Z,1520525868.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:48.528Z,1520525868.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T16:17:48.533Z,1520525868.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:48.912Z,1520525868.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:48.936Z,1520525868.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T16:17:48.938Z,1520525868.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:49.318Z,1520525869.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:49.339Z,1520525869.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T16:17:49.340Z,1520525869.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:49.688Z,1520525869.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:49.722Z,1520525869.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T16:17:49.723Z,1520525869.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:50.106Z,1520525870.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:50.126Z,1520525870.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T16:17:50.127Z,1520525870.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:50.512Z,1520525870.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:50.538Z,1520525870.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T16:17:50.539Z,1520525870.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:50.889Z,1520525870.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:50.915Z,1520525870.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T16:17:50.916Z,1520525870.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:51.293Z,1520525871.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:51.324Z,1520525871.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T16:17:51.329Z,1520525871.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:51.714Z,1520525871.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:51.735Z,1520525871.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T16:17:51.736Z,1520525871.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:52.117Z,1520525872.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:52.132Z,1520525872.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T16:17:52.133Z,1520525872.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:52.514Z,1520525872.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:52.529Z,1520525872.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T16:17:52.530Z,1520525872.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:52.895Z,1520525872.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:52.922Z,1520525872.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T16:17:52.923Z,1520525872.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:53.291Z,1520525873.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:53.319Z,1520525873.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T16:17:53.320Z,1520525873.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:53.696Z,1520525873.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:53.727Z,1520525873.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T16:17:53.727Z,1520525873.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:54.096Z,1520525874.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:54.123Z,1520525874.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T16:17:54.125Z,1520525874.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:54.505Z,1520525874.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:54.528Z,1520525874.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T16:17:54.529Z,1520525874.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:54.909Z,1520525874.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:54.931Z,1520525874.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T16:17:54.932Z,1520525874.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:55.317Z,1520525875.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:55.334Z,1520525875.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T16:17:55.336Z,1520525875.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:55.704Z,1520525875.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:55.720Z,1520525875.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:56.092Z,1520525876.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:56.123Z,1520525876.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:56.491Z,1520525876.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:56.519Z,1520525876.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:56.896Z,1520525876.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:56.930Z,1520525876.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:57.295Z,1520525877.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:57.322Z,1520525877.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:57.714Z,1520525877.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:57.735Z,1520525877.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:58.119Z,1520525878.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:58.139Z,1520525878.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:58.518Z,1520525878.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:58.535Z,1520525878.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:58.892Z,1520525878.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:58.923Z,1520525878.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:59.294Z,1520525879.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:59.322Z,1520525879.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:17:59.692Z,1520525879.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:17:59.732Z,1520525879.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:00.095Z,1520525880.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:00.124Z,1520525880.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:00.505Z,1520525880.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:00.531Z,1520525880.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:00.916Z,1520525880.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:00.931Z,1520525880.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:01.309Z,1520525881.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:01.329Z,1520525881.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:01.691Z,1520525881.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:01.727Z,1520525881.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:02.095Z,1520525882.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:02.128Z,1520525882.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:02.491Z,1520525882.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:02.518Z,1520525882.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:02.897Z,1520525882.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:02.928Z,1520525882.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:03.295Z,1520525883.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:03.331Z,1520525883.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:03.713Z,1520525883.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:03.740Z,1520525883.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:04.113Z,1520525884.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:04.139Z,1520525884.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:04.509Z,1520525884.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:04.540Z,1520525884.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:04.896Z,1520525884.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:04.911Z,1520525884.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:05.299Z,1520525885.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:05.318Z,1520525885.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:05.697Z,1520525885.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:05.718Z,1520525885.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:06.099Z,1520525886.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:06.114Z,1520525886.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:06.517Z,1520525886.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:06.554Z,1520525886.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:06.905Z,1520525886.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:06.920Z,1520525886.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:07.305Z,1520525887.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:07.326Z,1520525887.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:07.705Z,1520525887.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:07.720Z,1520525887.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:08.110Z,1520525888.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:08.125Z,1520525888.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:08.487Z,1520525888.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:08.522Z,1520525888.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:08.888Z,1520525888.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:08.922Z,1520525888.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:09.303Z,1520525889.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:09.322Z,1520525889.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:09.711Z,1520525889.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:09.726Z,1520525889.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:10.112Z,1520525890.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:10.135Z,1520525890.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:10.513Z,1520525890.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:10.535Z,1520525890.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:10.903Z,1520525890.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:10.918Z,1520525890.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:11.303Z,1520525891.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:11.322Z,1520525891.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:11.691Z,1520525891.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:11.723Z,1520525891.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:12.091Z,1520525892.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:12.117Z,1520525892.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:12.513Z,1520525892.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:12.528Z,1520525892.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:12.912Z,1520525892.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:12.928Z,1520525892.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:13.314Z,1520525893.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:13.329Z,1520525893.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:13.703Z,1520525893.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:13.718Z,1520525893.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:14.091Z,1520525894.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:14.123Z,1520525894.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:14.487Z,1520525894.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:14.518Z,1520525894.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:14.903Z,1520525894.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:14.919Z,1520525894.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:15.291Z,1520525895.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:15.326Z,1520525895.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:15.716Z,1520525895.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:15.731Z,1520525895.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:16.116Z,1520525896.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:16.144Z,1520525896.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:16.513Z,1520525896.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:16.529Z,1520525896.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:16.887Z,1520525896.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:16.919Z,1520525896.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:17.295Z,1520525897.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:17.321Z,1520525897.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:17.691Z,1520525897.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:17.718Z,1520525897.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:18.087Z,1520525898.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:18.118Z,1520525898.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:18.513Z,1520525898.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:18.529Z,1520525898.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:18.913Z,1520525898.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:18.928Z,1520525898.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:19.305Z,1520525899.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:19.346Z,1520525899.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:19.699Z,1520525899.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:19.730Z,1520525899.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:20.092Z,1520525900.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:20.107Z,1520525900.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:20.495Z,1520525900.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:20.510Z,1520525900.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:20.901Z,1520525900.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:20.917Z,1520525900.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:21.300Z,1520525901.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:21.316Z,1520525901.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:21.715Z,1520525901.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:21.792Z,1520525901.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:22.105Z,1520525902.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:22.121Z,1520525902.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:22.505Z,1520525902.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:22.521Z,1520525902.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:22.899Z,1520525902.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:22.914Z,1520525902.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:23.302Z,1520525903.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:23.317Z,1520525903.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:23.728Z,1520525903.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:23.766Z,1520525903.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:24.095Z,1520525904.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:24.123Z,1520525904.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:24.505Z,1520525904.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:24.527Z,1520525904.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:24.927Z,1520525904.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:24.950Z,1520525904.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:25.309Z,1520525905.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:25.339Z,1520525905.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:25.707Z,1520525905.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:25.739Z,1520525905.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:26.099Z,1520525906.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:26.115Z,1520525906.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:26.514Z,1520525906.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:26.539Z,1520525906.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:26.899Z,1520525906.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:26.919Z,1520525906.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:27.296Z,1520525907.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:27.311Z,1520525907.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:27.712Z,1520525907.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:27.746Z,1520525907.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:30.813Z,1520525910.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:30.844Z,1520525910.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:30.936Z,1520525910.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:30.988Z,1520525910.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:31.301Z,1520525911.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:31.322Z,1520525911.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:31.732Z,1520525911.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:31.752Z,1520525911.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:32.098Z,1520525912.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:32.114Z,1520525912.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:32.505Z,1520525912.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:32.520Z,1520525912.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:32.914Z,1520525912.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:32.949Z,1520525912.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:33.305Z,1520525913.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:33.321Z,1520525913.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:33.704Z,1520525913.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:33.719Z,1520525913.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:34.101Z,1520525914.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:34.123Z,1520525914.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:34.503Z,1520525914.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:34.519Z,1520525914.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:34.900Z,1520525914.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:34.915Z,1520525914.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:35.295Z,1520525915.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:35.323Z,1520525915.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:35.714Z,1520525915.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:35.730Z,1520525915.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:36.114Z,1520525916.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:36.135Z,1520525916.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:36.513Z,1520525916.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:36.535Z,1520525916.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:36.903Z,1520525916.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:36.919Z,1520525916.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:37.300Z,1520525917.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:37.315Z,1520525917.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:37.696Z,1520525917.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:37.727Z,1520525917.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:38.104Z,1520525918.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:38.119Z,1520525918.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:38.514Z,1520525918.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:38.529Z,1520525918.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:38.906Z,1520525918.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:38.934Z,1520525918.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:39.297Z,1520525919.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:39.331Z,1520525919.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:39.691Z,1520525919.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:39.728Z,1520525919.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:40.088Z,1520525920.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:40.116Z,1520525920.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:40.495Z,1520525920.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:40.526Z,1520525920.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:40.891Z,1520525920.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:40.929Z,1520525920.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:41.295Z,1520525921.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:41.331Z,1520525921.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:41.715Z,1520525921.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:41.730Z,1520525921.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:42.118Z,1520525922.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:42.139Z,1520525922.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:42.501Z,1520525922.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:42.539Z,1520525922.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:42.898Z,1520525922.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:42.929Z,1520525922.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:43.303Z,1520525923.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:43.328Z,1520525923.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:43.700Z,1520525923.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:43.729Z,1520525923.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:44.102Z,1520525924.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:44.127Z,1520525924.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:44.519Z,1520525924.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:44.535Z,1520525924.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:44.901Z,1520525924.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:44.922Z,1520525924.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:45.315Z,1520525925.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:45.330Z,1520525925.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:45.699Z,1520525925.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:45.736Z,1520525925.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:46.090Z,1520525926.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:46.114Z,1520525926.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:46.494Z,1520525926.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:46.510Z,1520525926.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:46.899Z,1520525926.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:46.914Z,1520525926.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:47.299Z,1520525927.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:47.335Z,1520525927.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:47.709Z,1520525927.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:47.740Z,1520525927.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:48.109Z,1520525928.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:48.146Z,1520525928.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:48.498Z,1520525928.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:48.513Z,1520525928.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:48.900Z,1520525928.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:48.915Z,1520525928.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:49.299Z,1520525929.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:49.314Z,1520525929.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:49.693Z,1520525929.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:49.719Z,1520525929.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:50.103Z,1520525930.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:50.119Z,1520525930.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:50.505Z,1520525930.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:50.520Z,1520525930.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:50.902Z,1520525930.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:50.929Z,1520525930.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:51.308Z,1520525931.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:51.323Z,1520525931.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:51.704Z,1520525931.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:51.719Z,1520525931.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:52.092Z,1520525932.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:52.128Z,1520525932.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:52.503Z,1520525932.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:52.518Z,1520525932.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:52.901Z,1520525932.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:52.916Z,1520525932.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:53.303Z,1520525933.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:53.322Z,1520525933.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:53.708Z,1520525933.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:53.724Z,1520525933.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:54.108Z,1520525934.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:54.123Z,1520525934.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:54.504Z,1520525934.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:54.520Z,1520525934.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:54.899Z,1520525934.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:54.915Z,1520525934.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:55.299Z,1520525935.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:55.314Z,1520525935.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:55.704Z,1520525935.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:55.720Z,1520525935.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:56.094Z,1520525936.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:56.110Z,1520525936.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:56.513Z,1520525936.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:56.528Z,1520525936.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:56.908Z,1520525936.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:56.925Z,1520525936.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:57.312Z,1520525937.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:57.328Z,1520525937.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:57.700Z,1520525937.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:57.715Z,1520525937.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:58.088Z,1520525938.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:58.122Z,1520525938.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:58.502Z,1520525938.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:58.518Z,1520525938.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:58.900Z,1520525938.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:58.922Z,1520525938.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:59.302Z,1520525939.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:59.318Z,1520525939.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:18:59.709Z,1520525939.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:18:59.730Z,1520525939.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:00.112Z,1520525940.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:00.135Z,1520525940.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:00.508Z,1520525940.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:00.531Z,1520525940.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:00.891Z,1520525940.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:00.922Z,1520525940.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:01.291Z,1520525941.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:01.317Z,1520525941.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:01.705Z,1520525941.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:01.721Z,1520525941.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:02.091Z,1520525942.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:02.123Z,1520525942.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:02.514Z,1520525942.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:02.530Z,1520525942.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:02.903Z,1520525942.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:02.922Z,1520525942.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:03.306Z,1520525943.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:03.334Z,1520525943.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:03.695Z,1520525943.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:03.722Z,1520525943.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:04.084Z,1520525944.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:04.108Z,1520525944.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:04.499Z,1520525944.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:04.526Z,1520525944.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:04.892Z,1520525944.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:04.927Z,1520525944.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:05.288Z,1520525945.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:05.303Z,1520525945.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:05.709Z,1520525945.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:05.737Z,1520525945.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:06.109Z,1520525946.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:06.132Z,1520525946.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:06.506Z,1520525946.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:06.541Z,1520525946.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:06.899Z,1520525946.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:06.915Z,1520525946.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:07.299Z,1520525947.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:07.314Z,1520525947.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:07.700Z,1520525947.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:07.715Z,1520525947.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:08.100Z,1520525948.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:08.115Z,1520525948.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:08.506Z,1520525948.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:08.522Z,1520525948.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:08.899Z,1520525948.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:08.931Z,1520525948.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:09.309Z,1520525949.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:09.324Z,1520525949.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:09.705Z,1520525949.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:09.720Z,1520525949.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:10.091Z,1520525950.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:10.114Z,1520525950.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:10.493Z,1520525950.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:10.521Z,1520525950.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:10.905Z,1520525950.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:10.920Z,1520525950.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:11.297Z,1520525951.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:11.320Z,1520525951.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:11.712Z,1520525951.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:11.728Z,1520525951.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:12.114Z,1520525952.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:12.136Z,1520525952.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:12.513Z,1520525952.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:12.535Z,1520525952.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:12.904Z,1520525952.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:12.926Z,1520525952.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:13.291Z,1520525953.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:13.329Z,1520525953.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:13.687Z,1520525953.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:13.722Z,1520525953.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:14.101Z,1520525954.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:14.122Z,1520525954.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:14.518Z,1520525954.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:14.539Z,1520525954.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:14.915Z,1520525954.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:14.931Z,1520525954.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:15.310Z,1520525955.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:15.331Z,1520525955.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:15.695Z,1520525955.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:15.723Z,1520525955.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:16.088Z,1520525956.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:16.112Z,1520525956.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:16.491Z,1520525956.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:16.523Z,1520525956.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:16.892Z,1520525956.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:16.920Z,1520525956.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:17.295Z,1520525957.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:17.331Z,1520525957.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:17.706Z,1520525957.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:17.734Z,1520525957.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:18.124Z,1520525958.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:18.150Z,1520525958.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:18.505Z,1520525958.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:18.544Z,1520525958.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:18.890Z,1520525958.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:18.907Z,1520525958.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:19.299Z,1520525959.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:19.315Z,1520525959.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:19.699Z,1520525959.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:19.716Z,1520525959.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:20.095Z,1520525960.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:20.111Z,1520525960.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:20.509Z,1520525960.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:20.542Z,1520525960.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:20.901Z,1520525960.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:20.917Z,1520525960.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:21.300Z,1520525961.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:21.319Z,1520525961.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:21.702Z,1520525961.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:21.719Z,1520525961.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:22.102Z,1520525962.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:22.117Z,1520525962.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:22.493Z,1520525962.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:22.509Z,1520525962.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:22.901Z,1520525962.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:22.917Z,1520525962.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:23.291Z,1520525963.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:23.313Z,1520525963.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:23.704Z,1520525963.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:23.720Z,1520525963.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:24.105Z,1520525964.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:24.121Z,1520525964.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:24.505Z,1520525964.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:24.521Z,1520525964.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:24.901Z,1520525964.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:24.918Z,1520525964.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:25.297Z,1520525965.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:25.318Z,1520525965.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:25.700Z,1520525965.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:25.716Z,1520525965.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:26.093Z,1520525966.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:26.109Z,1520525966.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:26.505Z,1520525966.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:26.521Z,1520525966.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:26.909Z,1520525966.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:26.931Z,1520525966.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:27.308Z,1520525967.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:27.323Z,1520525967.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:27.701Z,1520525967.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:27.717Z,1520525967.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:28.091Z,1520525968.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:28.119Z,1520525968.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:31.205Z,1520525971.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:31.222Z,1520525971.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:31.313Z,1520525971.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:31.359Z,1520525971.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:31.693Z,1520525971.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:31.709Z,1520525971.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:32.085Z,1520525972.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:32.107Z,1520525972.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:32.486Z,1520525972.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:32.519Z,1520525972.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:32.872Z,1520525972.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:32.887Z,1520525972.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:33.268Z,1520525973.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:33.283Z,1520525973.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:33.671Z,1520525973.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:33.687Z,1520525973.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:34.074Z,1520525974.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:34.094Z,1520525974.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:34.490Z,1520525974.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:34.520Z,1520525974.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:34.855Z,1520525974.855 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T16:19:34.855Z,1520525974.855 [NAL9602] Data Fault, FailCount= 3
2018-03-08T16:19:34.855Z,1520525974.855 [NAL9602](ERROR): Data Fault
2018-03-08T16:19:34.872Z,1520525974.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:34.887Z,1520525974.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:34.921Z,1520525974.921 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T16:19:35.263Z,1520525975.263 [NAL9602](INFO): Powering down
2018-03-08T16:19:35.281Z,1520525975.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:35.296Z,1520525975.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:35.674Z,1520525975.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:35.689Z,1520525975.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:36.079Z,1520525976.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:36.094Z,1520525976.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:36.107Z,1520525976.107 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T16:19:36.107Z,1520525976.107 [NAL9602] No Fault, FailCount= 3
2018-03-08T16:19:36.474Z,1520525976.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:36.489Z,1520525976.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:36.871Z,1520525976.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:36.886Z,1520525976.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:37.278Z,1520525977.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:37.295Z,1520525977.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:37.678Z,1520525977.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:37.692Z,1520525977.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:38.073Z,1520525978.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:38.087Z,1520525978.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:38.478Z,1520525978.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:38.498Z,1520525978.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:38.878Z,1520525978.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:38.898Z,1520525978.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:39.278Z,1520525979.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:39.293Z,1520525979.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:39.678Z,1520525979.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:39.698Z,1520525979.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:40.079Z,1520525980.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:40.098Z,1520525980.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:40.476Z,1520525980.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:40.491Z,1520525980.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:40.879Z,1520525980.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:40.898Z,1520525980.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:41.278Z,1520525981.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:41.298Z,1520525981.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:41.671Z,1520525981.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:41.686Z,1520525981.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:42.078Z,1520525982.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:42.093Z,1520525982.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:42.474Z,1520525982.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:42.489Z,1520525982.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:42.872Z,1520525982.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:42.887Z,1520525982.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:43.278Z,1520525983.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:43.298Z,1520525983.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:43.678Z,1520525983.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:43.698Z,1520525983.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:44.071Z,1520525984.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:44.086Z,1520525984.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:44.478Z,1520525984.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:44.498Z,1520525984.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:44.877Z,1520525984.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:44.893Z,1520525984.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:45.271Z,1520525985.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:45.286Z,1520525985.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:45.675Z,1520525985.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:45.690Z,1520525985.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:46.073Z,1520525986.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:46.093Z,1520525986.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:46.470Z,1520525986.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:46.485Z,1520525986.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:46.880Z,1520525986.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:46.896Z,1520525986.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:47.274Z,1520525987.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:47.295Z,1520525987.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:47.672Z,1520525987.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:47.687Z,1520525987.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:48.079Z,1520525988.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:48.098Z,1520525988.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:48.475Z,1520525988.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:48.491Z,1520525988.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:48.879Z,1520525988.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:48.894Z,1520525988.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:49.275Z,1520525989.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:49.291Z,1520525989.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:49.680Z,1520525989.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:49.695Z,1520525989.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:50.079Z,1520525990.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:50.094Z,1520525990.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:50.480Z,1520525990.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:50.495Z,1520525990.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:50.879Z,1520525990.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:50.895Z,1520525990.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:51.279Z,1520525991.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:51.294Z,1520525991.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:51.680Z,1520525991.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:51.696Z,1520525991.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:52.079Z,1520525992.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:52.094Z,1520525992.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:52.476Z,1520525992.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:52.491Z,1520525992.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:52.873Z,1520525992.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:52.889Z,1520525992.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:53.271Z,1520525993.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:53.294Z,1520525993.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:53.676Z,1520525993.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:53.692Z,1520525993.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:54.073Z,1520525994.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:54.088Z,1520525994.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:54.475Z,1520525994.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:54.490Z,1520525994.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:54.880Z,1520525994.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:54.895Z,1520525994.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:55.271Z,1520525995.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:55.295Z,1520525995.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:55.666Z,1520525995.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:55.699Z,1520525995.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:56.080Z,1520525996.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:56.095Z,1520525996.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:56.479Z,1520525996.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:56.495Z,1520525996.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:56.866Z,1520525996.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:56.903Z,1520525996.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:57.278Z,1520525997.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:57.294Z,1520525997.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:57.664Z,1520525997.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:57.687Z,1520525997.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:58.066Z,1520525998.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:58.092Z,1520525998.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:58.466Z,1520525998.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:58.493Z,1520525998.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:58.862Z,1520525998.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:58.886Z,1520525998.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:59.266Z,1520525999.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:59.303Z,1520525999.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:19:59.670Z,1520525999.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:19:59.701Z,1520525999.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:00.060Z,1520526000.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:00.075Z,1520526000.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:00.470Z,1520526000.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:00.507Z,1520526000.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:00.866Z,1520526000.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:00.908Z,1520526000.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:01.267Z,1520526001.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:01.282Z,1520526001.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:01.674Z,1520526001.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:01.708Z,1520526001.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:02.071Z,1520526002.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:02.109Z,1520526002.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:02.467Z,1520526002.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:02.482Z,1520526002.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:02.874Z,1520526002.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:02.911Z,1520526002.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:03.275Z,1520526003.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:03.289Z,1520526003.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:03.671Z,1520526003.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:03.686Z,1520526003.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:04.072Z,1520526004.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:04.095Z,1520526004.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:04.475Z,1520526004.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:04.490Z,1520526004.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:04.872Z,1520526004.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:04.887Z,1520526004.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:05.272Z,1520526005.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:05.296Z,1520526005.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:05.659Z,1520526005.659 [NAL9602](INFO): Powering up NAL9602
2018-03-08T16:20:05.676Z,1520526005.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:05.698Z,1520526005.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:06.069Z,1520526006.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:06.084Z,1520526006.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:06.475Z,1520526006.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:06.491Z,1520526006.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:06.874Z,1520526006.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:06.889Z,1520526006.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:07.275Z,1520526007.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:07.290Z,1520526007.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:07.672Z,1520526007.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:07.696Z,1520526007.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:08.078Z,1520526008.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:08.093Z,1520526008.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:08.477Z,1520526008.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:08.493Z,1520526008.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:08.875Z,1520526008.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:08.890Z,1520526008.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:09.274Z,1520526009.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:09.288Z,1520526009.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:09.672Z,1520526009.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:09.687Z,1520526009.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:10.069Z,1520526010.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:10.103Z,1520526010.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:10.478Z,1520526010.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:10.493Z,1520526010.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:10.860Z,1520526010.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:10.892Z,1520526010.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:11.278Z,1520526011.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:11.298Z,1520526011.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:11.678Z,1520526011.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:11.693Z,1520526011.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:12.060Z,1520526012.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:12.095Z,1520526012.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:12.478Z,1520526012.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:12.493Z,1520526012.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:12.875Z,1520526012.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:12.894Z,1520526012.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:13.278Z,1520526013.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:13.294Z,1520526013.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:13.669Z,1520526013.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:13.695Z,1520526013.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:14.074Z,1520526014.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:14.089Z,1520526014.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:14.478Z,1520526014.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:14.493Z,1520526014.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:14.871Z,1520526014.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:14.894Z,1520526014.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:15.274Z,1520526015.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:15.289Z,1520526015.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:15.664Z,1520526015.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:15.695Z,1520526015.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:16.079Z,1520526016.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:16.095Z,1520526016.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:16.476Z,1520526016.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:16.503Z,1520526016.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:16.854Z,1520526016.854 [NAL9602](INFO): NAL9602 initialized
2018-03-08T16:20:16.881Z,1520526016.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:16.902Z,1520526016.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:17.279Z,1520526017.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:17.298Z,1520526017.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:17.690Z,1520526017.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:17.705Z,1520526017.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:18.081Z,1520526018.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:18.097Z,1520526018.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:18.467Z,1520526018.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:18.502Z,1520526018.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:18.880Z,1520526018.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:18.895Z,1520526018.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:19.264Z,1520526019.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:19.298Z,1520526019.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:19.690Z,1520526019.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:19.705Z,1520526019.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:20.092Z,1520526020.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:20.107Z,1520526020.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:20.490Z,1520526020.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:20.505Z,1520526020.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:20.867Z,1520526020.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:20.903Z,1520526020.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:21.263Z,1520526021.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:21.298Z,1520526021.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:21.671Z,1520526021.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:21.699Z,1520526021.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:22.067Z,1520526022.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:22.099Z,1520526022.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:22.491Z,1520526022.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:22.506Z,1520526022.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:22.877Z,1520526022.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:22.910Z,1520526022.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:23.277Z,1520526023.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:23.303Z,1520526023.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:23.667Z,1520526023.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:23.703Z,1520526023.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:24.064Z,1520526024.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:24.079Z,1520526024.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:24.481Z,1520526024.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:24.508Z,1520526024.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:24.881Z,1520526024.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:24.907Z,1520526024.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:25.281Z,1520526025.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:25.308Z,1520526025.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:25.667Z,1520526025.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:25.683Z,1520526025.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:26.072Z,1520526026.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:26.087Z,1520526026.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:26.486Z,1520526026.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:26.511Z,1520526026.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:26.885Z,1520526026.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:26.908Z,1520526026.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:27.285Z,1520526027.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:27.314Z,1520526027.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:27.676Z,1520526027.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:27.691Z,1520526027.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:28.073Z,1520526028.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:28.088Z,1520526028.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:28.489Z,1520526028.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:28.515Z,1520526028.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:31.585Z,1520526031.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:31.615Z,1520526031.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:31.716Z,1520526031.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:31.762Z,1520526031.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:32.074Z,1520526032.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:32.093Z,1520526032.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:32.474Z,1520526032.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:32.488Z,1520526032.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:32.878Z,1520526032.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:32.893Z,1520526032.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:33.273Z,1520526033.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:33.290Z,1520526033.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:33.678Z,1520526033.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:33.693Z,1520526033.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:34.077Z,1520526034.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:34.093Z,1520526034.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:34.477Z,1520526034.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:34.492Z,1520526034.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:34.874Z,1520526034.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:34.890Z,1520526034.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:35.271Z,1520526035.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:35.287Z,1520526035.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:35.671Z,1520526035.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:35.687Z,1520526035.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:36.072Z,1520526036.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:36.087Z,1520526036.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:36.476Z,1520526036.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:36.491Z,1520526036.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:36.881Z,1520526036.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:36.896Z,1520526036.896 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:36.897Z,1520526036.897 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 172
2018-03-08T16:20:36.897Z,1520526036.897 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T16:20:36.899Z,1520526036.899 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:36.899Z,1520526036.899 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 172
2018-03-08T16:20:36.899Z,1520526036.899 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T16:20:36.921Z,1520526036.921 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:36.921Z,1520526036.921 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 172
2018-03-08T16:20:36.921Z,1520526036.921 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T16:20:36.944Z,1520526036.944 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T16:20:36.944Z,1520526036.944 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T16:20:36.949Z,1520526036.949 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T16:20:37.277Z,1520526037.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:37.338Z,1520526037.338 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T16:20:37.339Z,1520526037.339 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 172
2018-03-08T16:20:37.339Z,1520526037.339 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T16:20:37.339Z,1520526037.339 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 172
2018-03-08T16:20:37.340Z,1520526037.340 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T16:20:37.340Z,1520526037.340 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 172
2018-03-08T16:20:37.676Z,1520526037.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:37.690Z,1520526037.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T16:20:37.691Z,1520526037.691 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:20:37.691Z,1520526037.691 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:20:37.691Z,1520526037.691 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T16:20:37.692Z,1520526037.692 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:20:37.692Z,1520526037.692 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:20:37.692Z,1520526037.692 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T16:20:37.693Z,1520526037.693 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:20:37.693Z,1520526037.693 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:20:38.065Z,1520526038.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:38.098Z,1520526038.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T16:20:38.099Z,1520526038.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:38.485Z,1520526038.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:38.506Z,1520526038.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T16:20:38.507Z,1520526038.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:38.878Z,1520526038.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:38.893Z,1520526038.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T16:20:38.894Z,1520526038.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:39.277Z,1520526039.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:39.305Z,1520526039.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T16:20:39.306Z,1520526039.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:39.667Z,1520526039.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:39.693Z,1520526039.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T16:20:39.694Z,1520526039.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:40.060Z,1520526040.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:40.091Z,1520526040.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T16:20:40.092Z,1520526040.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:40.486Z,1520526040.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:40.501Z,1520526040.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T16:20:40.502Z,1520526040.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:40.886Z,1520526040.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:40.901Z,1520526040.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T16:20:40.902Z,1520526040.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:41.269Z,1520526041.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:41.295Z,1520526041.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T16:20:41.296Z,1520526041.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:41.663Z,1520526041.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:41.698Z,1520526041.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T16:20:41.699Z,1520526041.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:42.063Z,1520526042.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:42.098Z,1520526042.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T16:20:42.099Z,1520526042.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:42.469Z,1520526042.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:42.495Z,1520526042.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T16:20:42.497Z,1520526042.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:42.881Z,1520526042.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:42.904Z,1520526042.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T16:20:42.905Z,1520526042.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:43.286Z,1520526043.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:43.301Z,1520526043.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T16:20:43.302Z,1520526043.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:43.666Z,1520526043.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:43.698Z,1520526043.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T16:20:43.699Z,1520526043.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:44.063Z,1520526044.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:44.098Z,1520526044.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T16:20:44.099Z,1520526044.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:44.486Z,1520526044.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:44.501Z,1520526044.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T16:20:44.502Z,1520526044.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:44.873Z,1520526044.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:44.907Z,1520526044.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T16:20:44.908Z,1520526044.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:45.273Z,1520526045.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:45.299Z,1520526045.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T16:20:45.300Z,1520526045.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:45.664Z,1520526045.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:45.679Z,1520526045.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T16:20:45.679Z,1520526045.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:46.060Z,1520526046.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:46.075Z,1520526046.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T16:20:46.076Z,1520526046.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:46.481Z,1520526046.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:46.505Z,1520526046.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T16:20:46.506Z,1520526046.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:46.881Z,1520526046.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:46.905Z,1520526046.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T16:20:46.906Z,1520526046.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:47.281Z,1520526047.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:47.305Z,1520526047.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T16:20:47.306Z,1520526047.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:47.668Z,1520526047.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:47.706Z,1520526047.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T16:20:47.707Z,1520526047.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:48.070Z,1520526048.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:48.085Z,1520526048.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T16:20:48.086Z,1520526048.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:48.485Z,1520526048.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:48.515Z,1520526048.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T16:20:48.516Z,1520526048.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:48.881Z,1520526048.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:48.896Z,1520526048.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T16:20:48.909Z,1520526048.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:49.284Z,1520526049.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:49.298Z,1520526049.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T16:20:49.299Z,1520526049.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:49.672Z,1520526049.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:49.687Z,1520526049.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T16:20:49.688Z,1520526049.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:50.065Z,1520526050.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:50.088Z,1520526050.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T16:20:50.089Z,1520526050.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:50.481Z,1520526050.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:50.495Z,1520526050.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T16:20:50.496Z,1520526050.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:50.880Z,1520526050.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:50.895Z,1520526050.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T16:20:50.896Z,1520526050.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:51.280Z,1520526051.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:51.302Z,1520526051.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T16:20:51.303Z,1520526051.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:51.672Z,1520526051.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:51.687Z,1520526051.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T16:20:51.688Z,1520526051.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:52.060Z,1520526052.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:52.090Z,1520526052.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T16:20:52.091Z,1520526052.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:52.482Z,1520526052.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:52.497Z,1520526052.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T16:20:52.498Z,1520526052.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:52.884Z,1520526052.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:52.899Z,1520526052.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T16:20:52.900Z,1520526052.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:53.280Z,1520526053.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:53.296Z,1520526053.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T16:20:53.297Z,1520526053.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:53.667Z,1520526053.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:53.689Z,1520526053.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T16:20:53.690Z,1520526053.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:54.071Z,1520526054.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:54.086Z,1520526054.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T16:20:54.087Z,1520526054.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:54.485Z,1520526054.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:54.501Z,1520526054.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T16:20:54.501Z,1520526054.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:54.884Z,1520526054.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:54.899Z,1520526054.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T16:20:54.900Z,1520526054.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:55.285Z,1520526055.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:55.299Z,1520526055.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T16:20:55.300Z,1520526055.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:55.669Z,1520526055.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:55.687Z,1520526055.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T16:20:55.688Z,1520526055.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:56.067Z,1520526056.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:56.088Z,1520526056.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T16:20:56.089Z,1520526056.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:56.484Z,1520526056.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:56.499Z,1520526056.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T16:20:56.500Z,1520526056.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:56.877Z,1520526056.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:56.903Z,1520526056.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:57.281Z,1520526057.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:57.308Z,1520526057.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:57.663Z,1520526057.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:57.682Z,1520526057.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:58.060Z,1520526058.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:58.075Z,1520526058.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:58.477Z,1520526058.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:58.503Z,1520526058.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:58.877Z,1520526058.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:58.910Z,1520526058.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:59.278Z,1520526059.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:59.305Z,1520526059.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:20:59.671Z,1520526059.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:20:59.703Z,1520526059.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:00.066Z,1520526060.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:00.081Z,1520526060.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:00.477Z,1520526060.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:00.509Z,1520526060.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:00.881Z,1520526060.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:00.903Z,1520526060.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:01.280Z,1520526061.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:01.308Z,1520526061.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:01.671Z,1520526061.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:01.687Z,1520526061.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:02.071Z,1520526062.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:02.086Z,1520526062.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:02.481Z,1520526062.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:02.512Z,1520526062.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:02.869Z,1520526062.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:02.885Z,1520526062.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:03.277Z,1520526063.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:03.305Z,1520526063.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:03.673Z,1520526063.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:03.687Z,1520526063.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:04.059Z,1520526064.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:04.092Z,1520526064.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:04.485Z,1520526064.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:04.515Z,1520526064.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:04.873Z,1520526064.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:04.894Z,1520526064.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:05.285Z,1520526065.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:05.315Z,1520526065.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:05.669Z,1520526065.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:05.685Z,1520526065.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:06.071Z,1520526066.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:06.087Z,1520526066.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:06.470Z,1520526066.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:06.485Z,1520526066.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:06.889Z,1520526066.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:06.914Z,1520526066.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:07.281Z,1520526067.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:07.312Z,1520526067.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:07.670Z,1520526067.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:07.685Z,1520526067.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:08.067Z,1520526068.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:08.095Z,1520526068.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:08.485Z,1520526068.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:08.522Z,1520526068.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:08.874Z,1520526068.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:08.895Z,1520526068.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:09.276Z,1520526069.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:09.298Z,1520526069.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:09.676Z,1520526069.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:09.691Z,1520526069.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:10.068Z,1520526070.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:10.096Z,1520526070.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:10.481Z,1520526070.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:10.497Z,1520526070.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:10.880Z,1520526070.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:10.895Z,1520526070.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:11.281Z,1520526071.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:11.296Z,1520526071.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:11.677Z,1520526071.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:11.692Z,1520526071.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:12.076Z,1520526072.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:12.091Z,1520526072.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:12.481Z,1520526072.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:12.497Z,1520526072.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:12.882Z,1520526072.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:12.897Z,1520526072.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:13.281Z,1520526073.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:13.296Z,1520526073.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:13.677Z,1520526073.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:13.695Z,1520526073.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:14.071Z,1520526074.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:14.091Z,1520526074.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:14.481Z,1520526074.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:14.496Z,1520526074.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:14.876Z,1520526074.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:14.892Z,1520526074.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:15.280Z,1520526075.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:15.295Z,1520526075.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:15.673Z,1520526075.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:15.688Z,1520526075.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:16.071Z,1520526076.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:16.086Z,1520526076.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:16.481Z,1520526076.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:16.497Z,1520526076.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:16.881Z,1520526076.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:16.896Z,1520526076.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:17.280Z,1520526077.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:17.302Z,1520526077.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:17.675Z,1520526077.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:17.698Z,1520526077.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:18.075Z,1520526078.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:18.090Z,1520526078.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:18.481Z,1520526078.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:18.496Z,1520526078.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:18.880Z,1520526078.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:18.895Z,1520526078.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:19.281Z,1520526079.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:19.302Z,1520526079.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:19.665Z,1520526079.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:19.683Z,1520526079.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:20.071Z,1520526080.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:20.090Z,1520526080.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:20.479Z,1520526080.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:20.495Z,1520526080.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:20.875Z,1520526080.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:20.895Z,1520526080.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:21.280Z,1520526081.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:21.296Z,1520526081.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:21.672Z,1520526081.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:21.687Z,1520526081.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:22.063Z,1520526082.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:22.087Z,1520526082.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:22.481Z,1520526082.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:22.496Z,1520526082.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:22.880Z,1520526082.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:22.895Z,1520526082.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:23.280Z,1520526083.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:23.296Z,1520526083.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:23.675Z,1520526083.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:23.691Z,1520526083.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:24.076Z,1520526084.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:24.091Z,1520526084.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:24.480Z,1520526084.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:24.495Z,1520526084.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:24.880Z,1520526084.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:24.895Z,1520526084.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:25.281Z,1520526085.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:25.296Z,1520526085.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:25.676Z,1520526085.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:25.691Z,1520526085.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:26.075Z,1520526086.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:26.095Z,1520526086.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:26.484Z,1520526086.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:26.499Z,1520526086.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:26.880Z,1520526086.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:26.896Z,1520526086.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:27.284Z,1520526087.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:27.300Z,1520526087.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:27.303Z,1520526087.303 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T16:16:26.9Z
2018-03-08T16:21:27.304Z,1520526087.304 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T16:21:27.304Z,1520526087.304 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T16:21:27.663Z,1520526087.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:27.690Z,1520526087.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:28.156Z,1520526088.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:28.184Z,1520526088.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:28.481Z,1520526088.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:28.514Z,1520526088.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:31.624Z,1520526091.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:31.639Z,1520526091.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:31.742Z,1520526091.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:31.786Z,1520526091.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:32.077Z,1520526092.077 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0200.lzma
2018-03-08T16:21:32.097Z,1520526092.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:32.113Z,1520526092.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:32.495Z,1520526092.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:32.510Z,1520526092.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:32.867Z,1520526092.867 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0200.lzma.bak
2018-03-08T16:21:32.867Z,1520526092.867 [DataOverHttps](INFO): SBD MOMSN=7987229
2018-03-08T16:21:32.905Z,1520526092.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:32.920Z,1520526092.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:33.479Z,1520526093.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:33.494Z,1520526093.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:33.701Z,1520526093.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:33.738Z,1520526093.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:34.109Z,1520526094.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:34.124Z,1520526094.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:37.218Z,1520526097.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:37.299Z,1520526097.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:37.410Z,1520526097.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:37.434Z,1520526097.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:37.792Z,1520526097.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:37.808Z,1520526097.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:38.195Z,1520526098.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:38.210Z,1520526098.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:38.593Z,1520526098.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:38.614Z,1520526098.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:38.997Z,1520526098.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:39.012Z,1520526099.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:42.091Z,1520526102.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:42.106Z,1520526102.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:42.213Z,1520526102.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:42.228Z,1520526102.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:42.550Z,1520526102.550 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0201.lzma
2018-03-08T16:21:42.574Z,1520526102.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:42.602Z,1520526102.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:42.962Z,1520526102.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:42.997Z,1520526102.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:43.355Z,1520526103.355 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0201.lzma.bak
2018-03-08T16:21:43.355Z,1520526103.355 [DataOverHttps](INFO): SBD MOMSN=7987231
2018-03-08T16:21:43.382Z,1520526103.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:43.451Z,1520526103.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:44.028Z,1520526104.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:44.149Z,1520526104.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:44.163Z,1520526104.163 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T16:21:44.163Z,1520526104.163 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T16:21:44.163Z,1520526104.163 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T16:21:44.259Z,1520526104.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:44.284Z,1520526104.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:48.277Z,1520526108.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:48.309Z,1520526108.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:48.403Z,1520526108.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:48.450Z,1520526108.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:48.766Z,1520526108.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:48.782Z,1520526108.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:49.175Z,1520526109.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:49.219Z,1520526109.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:49.589Z,1520526109.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:49.612Z,1520526109.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:49.969Z,1520526109.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:49.985Z,1520526109.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:50.379Z,1520526110.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:50.435Z,1520526110.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:50.754Z,1520526110.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:50.782Z,1520526110.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:51.171Z,1520526111.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:51.190Z,1520526111.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:51.591Z,1520526111.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:51.606Z,1520526111.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:51.968Z,1520526111.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:51.983Z,1520526111.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:52.355Z,1520526112.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:52.391Z,1520526112.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:52.779Z,1520526112.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:52.794Z,1520526112.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:53.181Z,1520526113.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:53.196Z,1520526113.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:53.582Z,1520526113.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:53.597Z,1520526113.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:53.951Z,1520526113.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:53.983Z,1520526113.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:54.359Z,1520526114.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:54.385Z,1520526114.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:54.398Z,1520526114.398 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T16:21:54.755Z,1520526114.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:54.782Z,1520526114.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:55.150Z,1520526115.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:55.187Z,1520526115.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:55.579Z,1520526115.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:55.598Z,1520526115.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:55.981Z,1520526115.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:56.002Z,1520526116.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:56.378Z,1520526116.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:56.392Z,1520526116.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:56.759Z,1520526116.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:56.785Z,1520526116.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:57.154Z,1520526117.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:57.181Z,1520526117.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:57.551Z,1520526117.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:57.584Z,1520526117.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:57.959Z,1520526117.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:57.986Z,1520526117.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:58.355Z,1520526118.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:58.382Z,1520526118.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:58.773Z,1520526118.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:58.791Z,1520526118.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:59.178Z,1520526119.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:59.193Z,1520526119.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:59.573Z,1520526119.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:59.594Z,1520526119.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:21:59.951Z,1520526119.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:21:59.983Z,1520526119.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:00.359Z,1520526120.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:00.386Z,1520526120.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:00.755Z,1520526120.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:00.794Z,1520526120.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:01.151Z,1520526121.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:01.189Z,1520526121.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:01.578Z,1520526121.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:01.598Z,1520526121.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:01.977Z,1520526121.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:01.993Z,1520526121.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:02.373Z,1520526122.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:02.389Z,1520526122.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:02.755Z,1520526122.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:02.781Z,1520526122.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:03.154Z,1520526123.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:03.181Z,1520526123.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:03.551Z,1520526123.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:03.583Z,1520526123.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:03.959Z,1520526123.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:03.986Z,1520526123.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:04.355Z,1520526124.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:04.382Z,1520526124.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:04.772Z,1520526124.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:04.799Z,1520526124.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:05.181Z,1520526125.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:05.203Z,1520526125.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:05.577Z,1520526125.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:05.593Z,1520526125.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:05.951Z,1520526125.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:05.983Z,1520526125.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:06.359Z,1520526126.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:06.385Z,1520526126.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:06.755Z,1520526126.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:06.782Z,1520526126.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:07.150Z,1520526127.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:07.184Z,1520526127.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:07.577Z,1520526127.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:07.593Z,1520526127.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:07.978Z,1520526127.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:07.993Z,1520526127.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:08.368Z,1520526128.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:08.407Z,1520526128.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:08.759Z,1520526128.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:08.785Z,1520526128.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:09.155Z,1520526129.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:09.181Z,1520526129.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:09.551Z,1520526129.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:09.596Z,1520526129.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:09.960Z,1520526129.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:09.986Z,1520526129.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:10.372Z,1520526130.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:10.394Z,1520526130.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:10.772Z,1520526130.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:10.901Z,1520526130.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:11.182Z,1520526131.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:11.197Z,1520526131.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:11.572Z,1520526131.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:11.594Z,1520526131.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:11.955Z,1520526131.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:11.970Z,1520526131.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:12.356Z,1520526132.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:12.372Z,1520526132.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:12.773Z,1520526132.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:12.789Z,1520526132.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:13.158Z,1520526133.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:13.174Z,1520526133.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:13.570Z,1520526133.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:13.585Z,1520526133.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:13.969Z,1520526133.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:13.991Z,1520526133.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:14.369Z,1520526134.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:14.384Z,1520526134.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:14.756Z,1520526134.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:14.771Z,1520526134.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:15.188Z,1520526135.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:15.283Z,1520526135.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:15.569Z,1520526135.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:15.584Z,1520526135.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:15.961Z,1520526135.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:15.982Z,1520526135.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:16.357Z,1520526136.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:16.390Z,1520526136.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:16.778Z,1520526136.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:16.793Z,1520526136.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:17.173Z,1520526137.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:17.194Z,1520526137.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:17.573Z,1520526137.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:17.591Z,1520526137.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:17.967Z,1520526137.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:17.982Z,1520526137.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:18.367Z,1520526138.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:18.383Z,1520526138.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:18.763Z,1520526138.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:18.779Z,1520526138.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:19.151Z,1520526139.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:19.186Z,1520526139.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:19.570Z,1520526139.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:19.592Z,1520526139.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:19.974Z,1520526139.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:20.003Z,1520526140.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:20.378Z,1520526140.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:20.393Z,1520526140.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:20.752Z,1520526140.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:20.787Z,1520526140.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:21.152Z,1520526141.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:21.183Z,1520526141.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:21.555Z,1520526141.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:21.583Z,1520526141.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:21.953Z,1520526141.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:21.987Z,1520526141.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:22.365Z,1520526142.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:22.386Z,1520526142.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:22.774Z,1520526142.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:22.794Z,1520526142.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:23.173Z,1520526143.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:23.195Z,1520526143.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:23.577Z,1520526143.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:23.595Z,1520526143.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:23.967Z,1520526143.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:23.982Z,1520526143.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:24.368Z,1520526144.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:24.390Z,1520526144.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:24.755Z,1520526144.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:24.787Z,1520526144.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:25.158Z,1520526145.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:25.185Z,1520526145.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:25.569Z,1520526145.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:25.585Z,1520526145.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:25.977Z,1520526145.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:25.993Z,1520526145.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:26.378Z,1520526146.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:26.393Z,1520526146.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:26.752Z,1520526146.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:26.787Z,1520526146.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:27.153Z,1520526147.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:27.190Z,1520526147.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:27.555Z,1520526147.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:27.569Z,1520526147.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:27.960Z,1520526147.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:27.975Z,1520526147.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:28.362Z,1520526148.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:28.397Z,1520526148.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:28.784Z,1520526148.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:28.799Z,1520526148.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:29.166Z,1520526149.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:29.193Z,1520526149.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:29.573Z,1520526149.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:29.602Z,1520526149.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:29.963Z,1520526149.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:29.000Z,1520526150.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:30.355Z,1520526150.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:30.371Z,1520526150.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:30.763Z,1520526150.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:30.799Z,1520526150.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:31.159Z,1520526151.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:31.174Z,1520526151.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:31.565Z,1520526151.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:31.600Z,1520526151.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:31.977Z,1520526151.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:32.006Z,1520526152.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:32.373Z,1520526152.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:32.398Z,1520526152.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:32.755Z,1520526152.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:32.771Z,1520526152.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:33.159Z,1520526153.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:33.183Z,1520526153.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:33.563Z,1520526153.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:33.578Z,1520526153.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:33.956Z,1520526153.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:33.980Z,1520526153.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:34.362Z,1520526154.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:34.382Z,1520526154.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:34.777Z,1520526154.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:34.808Z,1520526154.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:35.164Z,1520526155.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:35.187Z,1520526155.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:35.577Z,1520526155.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:35.609Z,1520526155.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:35.967Z,1520526155.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:35.982Z,1520526155.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:36.366Z,1520526156.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:36.381Z,1520526156.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:36.761Z,1520526156.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:36.789Z,1520526156.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:37.167Z,1520526157.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:37.182Z,1520526157.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:37.573Z,1520526157.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:37.588Z,1520526157.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:37.972Z,1520526157.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:37.988Z,1520526157.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:38.372Z,1520526158.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:38.387Z,1520526158.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:38.753Z,1520526158.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:38.776Z,1520526158.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:39.163Z,1520526159.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:39.178Z,1520526159.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:39.567Z,1520526159.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:39.582Z,1520526159.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:39.956Z,1520526159.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:39.980Z,1520526159.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:40.366Z,1520526160.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:40.387Z,1520526160.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:40.778Z,1520526160.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:40.793Z,1520526160.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:41.172Z,1520526161.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:41.188Z,1520526161.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:41.577Z,1520526161.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:41.592Z,1520526161.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:41.968Z,1520526161.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:41.983Z,1520526161.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:42.367Z,1520526162.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:42.386Z,1520526162.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:42.768Z,1520526162.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:42.784Z,1520526162.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:43.167Z,1520526163.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:43.182Z,1520526163.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:43.573Z,1520526163.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:43.589Z,1520526163.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:43.976Z,1520526163.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:43.991Z,1520526163.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:44.377Z,1520526164.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:44.392Z,1520526164.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:44.757Z,1520526164.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:44.781Z,1520526164.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:47.875Z,1520526167.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:47.890Z,1520526167.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:48.021Z,1520526168.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:48.066Z,1520526168.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:48.397Z,1520526168.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:48.426Z,1520526168.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:48.793Z,1520526168.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:48.818Z,1520526168.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:49.193Z,1520526169.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:49.216Z,1520526169.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:49.586Z,1520526169.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:49.619Z,1520526169.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:49.981Z,1520526169.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:49.997Z,1520526169.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:50.379Z,1520526170.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:50.395Z,1520526170.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:50.798Z,1520526170.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:50.826Z,1520526170.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:51.197Z,1520526171.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:51.222Z,1520526171.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:51.592Z,1520526171.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:51.638Z,1520526171.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:52.013Z,1520526172.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:52.028Z,1520526172.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:52.384Z,1520526172.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:52.414Z,1520526172.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:52.780Z,1520526172.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:52.808Z,1520526172.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:53.178Z,1520526173.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:53.218Z,1520526173.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:53.590Z,1520526173.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:53.619Z,1520526173.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:53.989Z,1520526173.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:54.022Z,1520526174.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:54.394Z,1520526174.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:54.423Z,1520526174.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:54.775Z,1520526174.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:54.791Z,1520526174.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:55.183Z,1520526175.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:55.199Z,1520526175.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:55.575Z,1520526175.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:55.592Z,1520526175.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:55.983Z,1520526175.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:55.999Z,1520526175.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:56.383Z,1520526176.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:56.407Z,1520526176.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:56.789Z,1520526176.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:56.806Z,1520526176.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:57.193Z,1520526177.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:57.209Z,1520526177.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:57.590Z,1520526177.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:57.606Z,1520526177.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:57.986Z,1520526177.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:58.001Z,1520526178.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:58.379Z,1520526178.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:58.394Z,1520526178.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:58.787Z,1520526178.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:58.803Z,1520526178.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:59.187Z,1520526179.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:59.202Z,1520526179.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:59.588Z,1520526179.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:22:59.604Z,1520526179.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:22:59.993Z,1520526179.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:00.009Z,1520526180.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:00.390Z,1520526180.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:00.405Z,1520526180.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:00.786Z,1520526180.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:00.801Z,1520526180.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:01.188Z,1520526181.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:01.207Z,1520526181.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:01.586Z,1520526181.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:01.602Z,1520526181.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:01.988Z,1520526181.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:02.003Z,1520526182.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:02.376Z,1520526182.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:02.402Z,1520526182.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:02.788Z,1520526182.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:02.803Z,1520526182.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:03.193Z,1520526183.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:03.208Z,1520526183.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:03.590Z,1520526183.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:03.605Z,1520526183.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:03.988Z,1520526183.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:04.004Z,1520526184.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:04.386Z,1520526184.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:04.401Z,1520526184.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:04.787Z,1520526184.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:04.803Z,1520526184.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:05.186Z,1520526185.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:05.201Z,1520526185.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:05.589Z,1520526185.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:05.604Z,1520526185.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:05.994Z,1520526185.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:06.009Z,1520526186.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:06.390Z,1520526186.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:06.405Z,1520526186.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:06.786Z,1520526186.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:06.801Z,1520526186.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:07.186Z,1520526187.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:07.202Z,1520526187.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:07.583Z,1520526187.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:07.598Z,1520526187.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:07.984Z,1520526187.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:07.999Z,1520526187.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:08.386Z,1520526188.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:08.401Z,1520526188.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:08.789Z,1520526188.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:08.805Z,1520526188.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:09.193Z,1520526189.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:09.208Z,1520526189.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:09.590Z,1520526189.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:09.605Z,1520526189.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:09.983Z,1520526189.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:09.998Z,1520526189.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:10.383Z,1520526190.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:10.398Z,1520526190.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:10.782Z,1520526190.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:10.810Z,1520526190.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:11.187Z,1520526191.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:11.210Z,1520526191.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:11.599Z,1520526191.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:11.614Z,1520526191.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:11.997Z,1520526191.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:12.012Z,1520526192.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:12.396Z,1520526192.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:12.418Z,1520526192.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:12.787Z,1520526192.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:12.803Z,1520526192.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:13.187Z,1520526193.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:13.206Z,1520526193.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:13.591Z,1520526193.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:13.607Z,1520526193.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:13.975Z,1520526193.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:14.002Z,1520526194.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:14.386Z,1520526194.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:14.406Z,1520526194.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:14.794Z,1520526194.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:14.809Z,1520526194.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:15.201Z,1520526195.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:15.215Z,1520526195.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:15.598Z,1520526195.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:15.618Z,1520526195.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:15.986Z,1520526195.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:16.002Z,1520526196.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:16.371Z,1520526196.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:16.398Z,1520526196.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:16.787Z,1520526196.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:16.810Z,1520526196.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:17.188Z,1520526197.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:17.203Z,1520526197.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:17.595Z,1520526197.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:17.610Z,1520526197.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:17.000Z,1520526198.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:18.015Z,1520526198.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:18.397Z,1520526198.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:18.412Z,1520526198.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:18.771Z,1520526198.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:18.797Z,1520526198.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:19.187Z,1520526199.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:19.206Z,1520526199.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:19.574Z,1520526199.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:19.606Z,1520526199.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:19.971Z,1520526199.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:19.998Z,1520526199.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:20.376Z,1520526200.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:20.410Z,1520526200.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:20.817Z,1520526200.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:20.892Z,1520526200.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:21.200Z,1520526201.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:21.222Z,1520526201.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:21.589Z,1520526201.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:21.610Z,1520526201.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:21.979Z,1520526201.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:21.994Z,1520526201.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:22.379Z,1520526202.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:22.395Z,1520526202.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:22.780Z,1520526202.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:22.796Z,1520526202.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:23.176Z,1520526203.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:23.192Z,1520526203.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:23.589Z,1520526203.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:23.634Z,1520526203.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:23.989Z,1520526203.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:24.011Z,1520526204.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:24.389Z,1520526204.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:24.407Z,1520526204.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:24.771Z,1520526204.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:24.790Z,1520526204.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:25.173Z,1520526205.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:25.188Z,1520526205.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:25.575Z,1520526205.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:25.643Z,1520526205.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:25.976Z,1520526205.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:25.991Z,1520526205.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:26.395Z,1520526206.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:26.410Z,1520526206.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:26.794Z,1520526206.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:26.809Z,1520526206.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:27.202Z,1520526207.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:27.217Z,1520526207.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:27.597Z,1520526207.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:27.619Z,1520526207.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:27.987Z,1520526207.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:28.003Z,1520526208.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:28.371Z,1520526208.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:28.398Z,1520526208.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:28.786Z,1520526208.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:28.802Z,1520526208.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:29.191Z,1520526209.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:29.215Z,1520526209.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:29.599Z,1520526209.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:29.614Z,1520526209.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:29.998Z,1520526209.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:30.014Z,1520526210.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:30.398Z,1520526210.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:30.413Z,1520526210.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:30.790Z,1520526210.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:30.805Z,1520526210.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:31.169Z,1520526211.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:31.286Z,1520526211.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:31.588Z,1520526211.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:31.611Z,1520526211.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:31.989Z,1520526211.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:32.004Z,1520526212.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:32.389Z,1520526212.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:32.405Z,1520526212.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:32.795Z,1520526212.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:32.810Z,1520526212.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:33.202Z,1520526213.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:33.217Z,1520526213.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:33.585Z,1520526213.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:33.613Z,1520526213.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:33.979Z,1520526213.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:34.015Z,1520526214.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:34.378Z,1520526214.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:34.408Z,1520526214.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:34.779Z,1520526214.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:34.807Z,1520526214.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:35.174Z,1520526215.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:35.202Z,1520526215.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:35.592Z,1520526215.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:35.617Z,1520526215.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:35.991Z,1520526215.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:36.023Z,1520526216.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:36.397Z,1520526216.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:36.415Z,1520526216.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:36.778Z,1520526216.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:36.805Z,1520526216.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:37.168Z,1520526217.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:37.208Z,1520526217.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:37.578Z,1520526217.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:37.605Z,1520526217.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:37.971Z,1520526217.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:38.007Z,1520526218.007 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:38.007Z,1520526218.007 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 173
2018-03-08T16:23:38.007Z,1520526218.007 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T16:23:38.009Z,1520526218.009 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:38.009Z,1520526218.009 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 173
2018-03-08T16:23:38.009Z,1520526218.009 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T16:23:38.010Z,1520526218.010 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:38.011Z,1520526218.011 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 173
2018-03-08T16:23:38.011Z,1520526218.011 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T16:23:38.022Z,1520526218.022 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T16:23:38.022Z,1520526218.022 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T16:23:38.022Z,1520526218.022 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T16:23:38.375Z,1520526218.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:38.421Z,1520526218.421 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T16:23:38.421Z,1520526218.421 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 173
2018-03-08T16:23:38.421Z,1520526218.421 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T16:23:38.422Z,1520526218.422 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 173
2018-03-08T16:23:38.422Z,1520526218.422 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T16:23:38.422Z,1520526218.422 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 173
2018-03-08T16:23:38.786Z,1520526218.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:38.820Z,1520526218.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T16:23:38.821Z,1520526218.821 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:23:38.821Z,1520526218.821 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:23:38.822Z,1520526218.822 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T16:23:38.822Z,1520526218.822 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:23:38.822Z,1520526218.822 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:23:38.823Z,1520526218.823 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T16:23:38.823Z,1520526218.823 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:23:38.823Z,1520526218.823 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:23:39.199Z,1520526219.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:39.218Z,1520526219.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T16:23:39.219Z,1520526219.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:39.589Z,1520526219.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:39.618Z,1520526219.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T16:23:39.619Z,1520526219.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:39.983Z,1520526219.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:40.012Z,1520526220.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T16:23:40.013Z,1520526220.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:40.380Z,1520526220.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:40.411Z,1520526220.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T16:23:40.411Z,1520526220.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:40.783Z,1520526220.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:40.813Z,1520526220.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T16:23:40.814Z,1520526220.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:41.183Z,1520526221.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:41.212Z,1520526221.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T16:23:41.213Z,1520526221.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:41.592Z,1520526221.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:41.617Z,1520526221.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T16:23:41.618Z,1520526221.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:41.985Z,1520526221.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:42.006Z,1520526222.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T16:23:42.007Z,1520526222.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:42.403Z,1520526222.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:42.418Z,1520526222.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T16:23:42.419Z,1520526222.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:42.780Z,1520526222.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:42.813Z,1520526222.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T16:23:42.814Z,1520526222.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:43.171Z,1520526223.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:43.206Z,1520526223.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T16:23:43.207Z,1520526223.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:43.585Z,1520526223.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:43.600Z,1520526223.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T16:23:43.601Z,1520526223.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:43.979Z,1520526223.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:43.994Z,1520526223.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T16:23:43.995Z,1520526223.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:44.380Z,1520526224.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:44.395Z,1520526224.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T16:23:44.396Z,1520526224.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:44.797Z,1520526224.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:44.826Z,1520526224.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T16:23:44.827Z,1520526224.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:47.893Z,1520526227.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:47.908Z,1520526227.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-03-08T16:23:47.932Z,1520526227.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:48.017Z,1520526228.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:48.054Z,1520526228.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T16:23:48.055Z,1520526228.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:48.386Z,1520526228.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:48.406Z,1520526228.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T16:23:48.407Z,1520526228.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:48.789Z,1520526228.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:48.803Z,1520526228.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T16:23:48.804Z,1520526228.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:49.182Z,1520526229.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:49.227Z,1520526229.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T16:23:49.228Z,1520526229.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:49.593Z,1520526229.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:49.608Z,1520526229.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T16:23:49.609Z,1520526229.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:50.001Z,1520526230.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:50.015Z,1520526230.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T16:23:50.039Z,1520526230.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:50.402Z,1520526230.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:50.434Z,1520526230.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T16:23:50.435Z,1520526230.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:50.786Z,1520526230.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:50.804Z,1520526230.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T16:23:50.805Z,1520526230.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:51.188Z,1520526231.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:51.203Z,1520526231.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T16:23:51.204Z,1520526231.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:51.580Z,1520526231.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:51.609Z,1520526231.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T16:23:51.610Z,1520526231.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:51.988Z,1520526231.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:52.003Z,1520526232.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T16:23:52.004Z,1520526232.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:52.383Z,1520526232.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:52.398Z,1520526232.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T16:23:52.399Z,1520526232.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:52.789Z,1520526232.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:52.805Z,1520526232.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T16:23:52.806Z,1520526232.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:53.201Z,1520526233.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:53.216Z,1520526233.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T16:23:53.237Z,1520526233.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:53.593Z,1520526233.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:53.614Z,1520526233.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T16:23:53.615Z,1520526233.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:53.976Z,1520526233.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:54.003Z,1520526234.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T16:23:54.004Z,1520526234.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:54.390Z,1520526234.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:54.405Z,1520526234.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T16:23:54.406Z,1520526234.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:54.784Z,1520526234.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:54.798Z,1520526234.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T16:23:54.799Z,1520526234.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:55.185Z,1520526235.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:55.208Z,1520526235.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T16:23:55.209Z,1520526235.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:55.592Z,1520526235.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:55.614Z,1520526235.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T16:23:55.615Z,1520526235.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:55.997Z,1520526235.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:56.011Z,1520526236.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T16:23:56.012Z,1520526236.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:56.393Z,1520526236.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:56.409Z,1520526236.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T16:23:56.410Z,1520526236.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:56.787Z,1520526236.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:56.802Z,1520526236.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T16:23:56.803Z,1520526236.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:57.190Z,1520526237.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:57.206Z,1520526237.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T16:23:57.207Z,1520526237.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:57.584Z,1520526237.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:57.599Z,1520526237.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T16:23:57.600Z,1520526237.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:57.993Z,1520526237.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:58.008Z,1520526238.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:58.390Z,1520526238.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:58.405Z,1520526238.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:58.793Z,1520526238.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:58.808Z,1520526238.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:59.197Z,1520526239.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:59.215Z,1520526239.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:59.593Z,1520526239.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:59.614Z,1520526239.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:23:59.981Z,1520526239.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:23:59.997Z,1520526239.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:00.391Z,1520526240.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:00.414Z,1520526240.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:00.792Z,1520526240.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:00.807Z,1520526240.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:01.181Z,1520526241.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:01.231Z,1520526241.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:01.593Z,1520526241.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:01.609Z,1520526241.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:01.998Z,1520526241.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:02.013Z,1520526242.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:02.393Z,1520526242.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:02.409Z,1520526242.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:02.787Z,1520526242.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:02.803Z,1520526242.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:03.190Z,1520526243.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:03.205Z,1520526243.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:03.584Z,1520526243.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:03.599Z,1520526243.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:03.985Z,1520526243.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:04.006Z,1520526244.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:04.384Z,1520526244.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:04.398Z,1520526244.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:04.793Z,1520526244.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:04.809Z,1520526244.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:05.197Z,1520526245.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:05.218Z,1520526245.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:05.597Z,1520526245.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:05.612Z,1520526245.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:05.977Z,1520526245.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:05.000Z,1520526246.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:06.394Z,1520526246.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:06.410Z,1520526246.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:06.794Z,1520526246.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:06.809Z,1520526246.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:07.182Z,1520526247.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:07.212Z,1520526247.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:07.597Z,1520526247.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:07.618Z,1520526247.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:07.997Z,1520526247.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:08.013Z,1520526248.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:08.398Z,1520526248.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:08.418Z,1520526248.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:08.791Z,1520526248.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:08.814Z,1520526248.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:09.192Z,1520526249.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:09.208Z,1520526249.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:09.585Z,1520526249.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:09.601Z,1520526249.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:09.995Z,1520526249.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:10.011Z,1520526250.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:10.388Z,1520526250.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:10.403Z,1520526250.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:10.798Z,1520526250.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:10.820Z,1520526250.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:11.197Z,1520526251.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:11.219Z,1520526251.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:11.599Z,1520526251.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:11.614Z,1520526251.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:11.977Z,1520526251.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:12.010Z,1520526252.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:12.387Z,1520526252.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:12.407Z,1520526252.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:12.784Z,1520526252.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:12.799Z,1520526252.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:13.181Z,1520526253.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:13.215Z,1520526253.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:13.602Z,1520526253.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:13.617Z,1520526253.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:14.000Z,1520526254.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:14.016Z,1520526254.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:14.401Z,1520526254.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:14.417Z,1520526254.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:14.787Z,1520526254.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:14.807Z,1520526254.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:15.187Z,1520526255.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:15.202Z,1520526255.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:15.576Z,1520526255.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:15.612Z,1520526255.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:15.985Z,1520526255.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:16.006Z,1520526256.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:16.393Z,1520526256.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:16.408Z,1520526256.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:16.790Z,1520526256.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:16.817Z,1520526256.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:17.204Z,1520526257.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:17.219Z,1520526257.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:17.602Z,1520526257.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:17.617Z,1520526257.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:17.976Z,1520526257.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:18.014Z,1520526258.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:18.392Z,1520526258.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:18.407Z,1520526258.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:18.779Z,1520526258.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:18.806Z,1520526258.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:19.172Z,1520526259.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:19.211Z,1520526259.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:19.601Z,1520526259.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:19.616Z,1520526259.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:20.004Z,1520526260.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:20.019Z,1520526260.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:20.389Z,1520526260.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:20.421Z,1520526260.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:20.791Z,1520526260.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:20.806Z,1520526260.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:21.196Z,1520526261.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:21.211Z,1520526261.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:21.576Z,1520526261.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:21.611Z,1520526261.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:21.979Z,1520526261.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:22.011Z,1520526262.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:22.382Z,1520526262.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:22.409Z,1520526262.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:22.797Z,1520526262.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:22.818Z,1520526262.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:23.202Z,1520526263.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:23.217Z,1520526263.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:23.592Z,1520526263.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:23.626Z,1520526263.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:23.973Z,1520526263.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:23.996Z,1520526263.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:24.378Z,1520526264.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:24.410Z,1520526264.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:24.775Z,1520526264.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:24.811Z,1520526264.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:25.173Z,1520526265.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:25.188Z,1520526265.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:25.589Z,1520526265.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:25.616Z,1520526265.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:26.006Z,1520526266.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:26.021Z,1520526266.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:26.401Z,1520526266.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:26.417Z,1520526266.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:26.779Z,1520526266.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:26.814Z,1520526266.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:27.179Z,1520526267.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:27.214Z,1520526267.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:27.576Z,1520526267.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:27.591Z,1520526267.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:27.988Z,1520526267.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:28.020Z,1520526268.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:28.386Z,1520526268.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:28.401Z,1520526268.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:28.786Z,1520526268.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:28.801Z,1520526268.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:29.201Z,1520526269.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:29.230Z,1520526269.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:29.601Z,1520526269.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:29.630Z,1520526269.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:29.980Z,1520526269.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:29.996Z,1520526269.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:30.387Z,1520526270.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:30.422Z,1520526270.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:30.787Z,1520526270.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:30.831Z,1520526270.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:31.175Z,1520526271.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:31.199Z,1520526271.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:31.601Z,1520526271.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:31.632Z,1520526271.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:32.001Z,1520526272.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:32.032Z,1520526272.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:32.397Z,1520526272.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:32.433Z,1520526272.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:32.787Z,1520526272.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:32.803Z,1520526272.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:33.188Z,1520526273.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:33.203Z,1520526273.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:33.579Z,1520526273.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:33.606Z,1520526273.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:33.990Z,1520526273.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:34.010Z,1520526274.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:34.391Z,1520526274.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:34.406Z,1520526274.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:34.793Z,1520526274.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:34.809Z,1520526274.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:35.193Z,1520526275.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:35.209Z,1520526275.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:35.593Z,1520526275.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:35.609Z,1520526275.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:35.983Z,1520526275.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:35.998Z,1520526275.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:36.385Z,1520526276.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:36.401Z,1520526276.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:36.788Z,1520526276.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:36.803Z,1520526276.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:37.190Z,1520526277.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:37.205Z,1520526277.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:37.597Z,1520526277.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:37.613Z,1520526277.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:37.993Z,1520526277.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:38.009Z,1520526278.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:38.393Z,1520526278.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:38.408Z,1520526278.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:38.790Z,1520526278.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:38.805Z,1520526278.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:39.188Z,1520526279.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:39.210Z,1520526279.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:39.591Z,1520526279.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:39.606Z,1520526279.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:39.991Z,1520526279.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:40.006Z,1520526280.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:40.391Z,1520526280.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:40.406Z,1520526280.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:40.792Z,1520526280.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:40.808Z,1520526280.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:41.197Z,1520526281.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:41.213Z,1520526281.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:41.597Z,1520526281.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:41.619Z,1520526281.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:41.991Z,1520526281.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:42.015Z,1520526282.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:42.392Z,1520526282.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:42.407Z,1520526282.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:42.793Z,1520526282.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:42.808Z,1520526282.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:43.179Z,1520526283.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:43.202Z,1520526283.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:43.598Z,1520526283.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:43.619Z,1520526283.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:43.998Z,1520526283.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:44.019Z,1520526284.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:44.398Z,1520526284.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:44.419Z,1520526284.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:44.787Z,1520526284.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:44.806Z,1520526284.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:47.893Z,1520526287.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:47.909Z,1520526287.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:48.006Z,1520526288.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:48.050Z,1520526288.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:48.380Z,1520526288.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:48.399Z,1520526288.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:48.779Z,1520526288.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:48.794Z,1520526288.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:49.181Z,1520526289.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:49.202Z,1520526289.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:49.566Z,1520526289.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:49.591Z,1520526289.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:49.960Z,1520526289.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:49.993Z,1520526289.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:50.363Z,1520526290.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:50.393Z,1520526290.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:50.779Z,1520526290.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:50.795Z,1520526290.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:51.180Z,1520526291.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:51.195Z,1520526291.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:51.583Z,1520526291.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:51.599Z,1520526291.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:51.963Z,1520526291.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:51.992Z,1520526291.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:52.359Z,1520526292.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:52.391Z,1520526292.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:52.763Z,1520526292.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:52.792Z,1520526292.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:53.162Z,1520526293.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:53.193Z,1520526293.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:53.580Z,1520526293.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:53.595Z,1520526293.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:53.983Z,1520526293.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:53.998Z,1520526293.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:54.379Z,1520526294.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:54.395Z,1520526294.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:54.760Z,1520526294.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:54.791Z,1520526294.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:55.163Z,1520526295.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:55.192Z,1520526295.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:55.562Z,1520526295.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:55.592Z,1520526295.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:55.963Z,1520526295.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:55.993Z,1520526295.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:56.363Z,1520526296.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:56.392Z,1520526296.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:56.783Z,1520526296.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:56.799Z,1520526296.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:57.179Z,1520526297.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:57.194Z,1520526297.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:57.579Z,1520526297.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:57.595Z,1520526297.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:57.959Z,1520526297.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:57.993Z,1520526297.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:58.363Z,1520526298.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:58.392Z,1520526298.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:58.757Z,1520526298.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:58.789Z,1520526298.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:59.158Z,1520526299.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:59.195Z,1520526299.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:59.573Z,1520526299.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:59.598Z,1520526299.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:24:59.973Z,1520526299.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:24:59.997Z,1520526299.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:00.373Z,1520526300.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:00.397Z,1520526300.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:00.763Z,1520526300.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:00.778Z,1520526300.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:01.159Z,1520526301.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:01.179Z,1520526301.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:01.563Z,1520526301.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:01.579Z,1520526301.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:01.964Z,1520526301.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:01.979Z,1520526301.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:02.363Z,1520526302.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:02.379Z,1520526302.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:02.778Z,1520526302.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:02.801Z,1520526302.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:03.173Z,1520526303.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:03.200Z,1520526303.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:03.577Z,1520526303.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:03.608Z,1520526303.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:03.961Z,1520526303.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:03.977Z,1520526303.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:04.363Z,1520526304.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:04.378Z,1520526304.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:04.760Z,1520526304.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:04.776Z,1520526304.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:05.163Z,1520526305.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:05.179Z,1520526305.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:05.576Z,1520526305.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:05.607Z,1520526305.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:05.977Z,1520526305.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:06.008Z,1520526306.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:06.369Z,1520526306.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:06.384Z,1520526306.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:06.759Z,1520526306.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:06.774Z,1520526306.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:07.164Z,1520526307.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:07.179Z,1520526307.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:07.564Z,1520526307.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:07.580Z,1520526307.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:07.964Z,1520526307.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:07.979Z,1520526307.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:08.360Z,1520526308.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:08.382Z,1520526308.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:08.777Z,1520526308.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:08.807Z,1520526308.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:09.173Z,1520526309.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:09.188Z,1520526309.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:09.573Z,1520526309.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:09.605Z,1520526309.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:09.964Z,1520526309.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:09.979Z,1520526309.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:10.364Z,1520526310.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:10.379Z,1520526310.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:10.764Z,1520526310.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:10.780Z,1520526310.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:11.162Z,1520526311.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:11.177Z,1520526311.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:11.569Z,1520526311.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:11.584Z,1520526311.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:11.969Z,1520526311.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:11.985Z,1520526311.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:12.366Z,1520526312.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:12.382Z,1520526312.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:12.763Z,1520526312.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:12.778Z,1520526312.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:13.164Z,1520526313.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:13.179Z,1520526313.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:13.563Z,1520526313.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:13.579Z,1520526313.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:13.963Z,1520526313.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:13.978Z,1520526313.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:14.364Z,1520526314.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:14.383Z,1520526314.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:14.765Z,1520526314.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:14.781Z,1520526314.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:15.177Z,1520526315.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:15.192Z,1520526315.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:15.577Z,1520526315.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:15.609Z,1520526315.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:15.966Z,1520526315.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:15.981Z,1520526315.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:16.366Z,1520526316.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:16.381Z,1520526316.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:16.767Z,1520526316.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:16.783Z,1520526316.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:17.166Z,1520526317.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:17.186Z,1520526317.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:17.569Z,1520526317.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:17.585Z,1520526317.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:17.969Z,1520526317.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:17.985Z,1520526317.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:18.368Z,1520526318.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:18.383Z,1520526318.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:18.765Z,1520526318.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:18.779Z,1520526318.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:19.167Z,1520526319.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:19.183Z,1520526319.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:19.563Z,1520526319.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:19.578Z,1520526319.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:19.967Z,1520526319.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:19.982Z,1520526319.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:20.367Z,1520526320.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:20.382Z,1520526320.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:20.769Z,1520526320.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:20.785Z,1520526320.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:21.174Z,1520526321.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:21.189Z,1520526321.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:21.569Z,1520526321.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:21.597Z,1520526321.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:21.974Z,1520526321.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:21.989Z,1520526321.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:22.366Z,1520526322.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:22.381Z,1520526322.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:22.770Z,1520526322.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:22.786Z,1520526322.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:23.159Z,1520526323.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:23.187Z,1520526323.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:23.580Z,1520526323.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:23.595Z,1520526323.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:23.970Z,1520526323.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:23.998Z,1520526323.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:24.379Z,1520526324.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:24.394Z,1520526324.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:24.758Z,1520526324.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:24.787Z,1520526324.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:25.152Z,1520526325.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:25.189Z,1520526325.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:25.555Z,1520526325.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:25.581Z,1520526325.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:25.955Z,1520526325.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:25.982Z,1520526325.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:26.359Z,1520526326.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:26.386Z,1520526326.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:26.774Z,1520526326.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:26.791Z,1520526326.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:27.185Z,1520526327.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:27.227Z,1520526327.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:27.569Z,1520526327.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:27.585Z,1520526327.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:27.955Z,1520526327.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:27.981Z,1520526327.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:28.355Z,1520526328.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:28.381Z,1520526328.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:28.759Z,1520526328.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:28.788Z,1520526328.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:29.154Z,1520526329.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:29.181Z,1520526329.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:29.578Z,1520526329.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:29.593Z,1520526329.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:29.971Z,1520526329.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:29.991Z,1520526329.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:30.378Z,1520526330.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:30.393Z,1520526330.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:30.759Z,1520526330.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:30.785Z,1520526330.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:31.149Z,1520526331.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:31.172Z,1520526331.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:31.560Z,1520526331.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:31.587Z,1520526331.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:31.955Z,1520526331.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:31.990Z,1520526331.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:32.359Z,1520526332.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:32.385Z,1520526332.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:32.773Z,1520526332.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:32.789Z,1520526332.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:33.165Z,1520526333.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:33.199Z,1520526333.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:33.561Z,1520526333.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:33.599Z,1520526333.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:33.958Z,1520526333.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:33.990Z,1520526333.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:34.359Z,1520526334.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:34.391Z,1520526334.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:34.749Z,1520526334.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:34.765Z,1520526334.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:35.155Z,1520526335.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:35.170Z,1520526335.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:35.569Z,1520526335.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:35.597Z,1520526335.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:35.965Z,1520526335.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:35.996Z,1520526335.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:36.374Z,1520526336.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:36.399Z,1520526336.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:36.759Z,1520526336.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:36.774Z,1520526336.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:37.156Z,1520526337.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:37.178Z,1520526337.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:37.562Z,1520526337.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:37.582Z,1520526337.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:37.960Z,1520526337.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:37.975Z,1520526337.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:38.360Z,1520526338.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:38.376Z,1520526338.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:38.769Z,1520526338.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:38.785Z,1520526338.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:39.177Z,1520526339.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:39.192Z,1520526339.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:39.564Z,1520526339.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:39.586Z,1520526339.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:39.964Z,1520526339.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:39.979Z,1520526339.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:40.363Z,1520526340.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:40.378Z,1520526340.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:40.764Z,1520526340.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:40.779Z,1520526340.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:41.163Z,1520526341.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:41.178Z,1520526341.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:41.577Z,1520526341.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:41.592Z,1520526341.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:41.964Z,1520526341.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:41.979Z,1520526341.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:42.365Z,1520526342.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:42.381Z,1520526342.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:42.763Z,1520526342.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:42.778Z,1520526342.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:43.160Z,1520526343.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:43.176Z,1520526343.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:43.562Z,1520526343.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:43.577Z,1520526343.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:43.964Z,1520526343.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:43.979Z,1520526343.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:44.362Z,1520526344.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:44.382Z,1520526344.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:44.765Z,1520526344.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:44.781Z,1520526344.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:45.165Z,1520526345.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:45.180Z,1520526345.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:48.277Z,1520526348.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:48.309Z,1520526348.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:48.403Z,1520526348.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:48.438Z,1520526348.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:48.775Z,1520526348.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:48.790Z,1520526348.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:49.171Z,1520526349.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:49.187Z,1520526349.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:49.585Z,1520526349.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:49.615Z,1520526349.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:49.981Z,1520526349.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:50.013Z,1520526350.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:50.381Z,1520526350.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:50.413Z,1520526350.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:50.772Z,1520526350.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:50.788Z,1520526350.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:51.172Z,1520526351.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:51.187Z,1520526351.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:51.563Z,1520526351.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:51.583Z,1520526351.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:51.971Z,1520526351.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:51.986Z,1520526351.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:52.371Z,1520526352.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:52.386Z,1520526352.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:52.774Z,1520526352.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:52.789Z,1520526352.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:53.177Z,1520526353.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:53.193Z,1520526353.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:53.585Z,1520526353.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:53.622Z,1520526353.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:53.968Z,1520526353.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:53.983Z,1520526353.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:54.372Z,1520526354.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:54.394Z,1520526354.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:54.773Z,1520526354.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:54.789Z,1520526354.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:55.170Z,1520526355.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:55.185Z,1520526355.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:55.585Z,1520526355.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:55.621Z,1520526355.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:55.981Z,1520526355.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:55.997Z,1520526355.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:56.377Z,1520526356.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:56.393Z,1520526356.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:56.771Z,1520526356.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:56.786Z,1520526356.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:57.169Z,1520526357.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:57.189Z,1520526357.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:57.576Z,1520526357.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:57.591Z,1520526357.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:57.969Z,1520526357.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:57.989Z,1520526357.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:58.373Z,1520526358.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:58.388Z,1520526358.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:58.777Z,1520526358.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:58.793Z,1520526358.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:59.177Z,1520526359.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:59.193Z,1520526359.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:59.578Z,1520526359.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:59.594Z,1520526359.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:25:59.972Z,1520526359.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:25:59.988Z,1520526359.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:00.376Z,1520526360.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:00.392Z,1520526360.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:00.774Z,1520526360.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:00.789Z,1520526360.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:01.177Z,1520526361.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:01.192Z,1520526361.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:01.578Z,1520526361.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:01.593Z,1520526361.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:01.978Z,1520526361.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:01.993Z,1520526361.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:02.378Z,1520526362.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:02.393Z,1520526362.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:02.774Z,1520526362.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:02.790Z,1520526362.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:03.170Z,1520526363.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:03.203Z,1520526363.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:03.575Z,1520526363.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:03.592Z,1520526363.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:03.971Z,1520526363.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:03.988Z,1520526363.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:04.369Z,1520526364.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:04.393Z,1520526364.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:04.780Z,1520526364.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:04.797Z,1520526364.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:05.181Z,1520526365.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:05.198Z,1520526365.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:05.581Z,1520526365.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:05.603Z,1520526365.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:05.975Z,1520526365.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:05.991Z,1520526365.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:06.375Z,1520526366.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:06.390Z,1520526366.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:06.773Z,1520526366.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:06.788Z,1520526366.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:07.167Z,1520526367.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:07.199Z,1520526367.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:07.580Z,1520526367.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:07.595Z,1520526367.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:07.981Z,1520526367.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:07.996Z,1520526367.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:08.380Z,1520526368.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:08.402Z,1520526368.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:08.774Z,1520526368.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:08.790Z,1520526368.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:09.169Z,1520526369.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:09.205Z,1520526369.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:09.575Z,1520526369.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:09.594Z,1520526369.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:09.976Z,1520526369.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:09.991Z,1520526369.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:10.372Z,1520526370.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:10.387Z,1520526370.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:10.781Z,1520526370.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:10.796Z,1520526370.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:11.183Z,1520526371.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:11.199Z,1520526371.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:11.585Z,1520526371.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:11.600Z,1520526371.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:11.976Z,1520526371.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:11.998Z,1520526371.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:12.374Z,1520526372.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:12.390Z,1520526372.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:12.773Z,1520526372.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:12.788Z,1520526372.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:13.159Z,1520526373.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:13.190Z,1520526373.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:13.584Z,1520526373.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:13.600Z,1520526373.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:13.986Z,1520526373.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:14.006Z,1520526374.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:14.381Z,1520526374.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:14.396Z,1520526374.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:14.775Z,1520526374.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:14.791Z,1520526374.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:15.169Z,1520526375.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:15.191Z,1520526375.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:15.575Z,1520526375.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:15.591Z,1520526375.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:15.971Z,1520526375.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:15.986Z,1520526375.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:16.369Z,1520526376.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:16.390Z,1520526376.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:16.782Z,1520526376.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:16.802Z,1520526376.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:17.183Z,1520526377.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:17.199Z,1520526377.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:17.585Z,1520526377.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:17.601Z,1520526377.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:17.971Z,1520526377.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:17.990Z,1520526377.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:18.374Z,1520526378.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:18.390Z,1520526378.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:18.767Z,1520526378.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:18.798Z,1520526378.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:19.174Z,1520526379.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:19.194Z,1520526379.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:19.585Z,1520526379.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:19.606Z,1520526379.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:19.986Z,1520526379.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:20.001Z,1520526380.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:20.385Z,1520526380.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:20.400Z,1520526380.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:20.775Z,1520526380.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:20.791Z,1520526380.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:21.163Z,1520526381.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:21.195Z,1520526381.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:21.564Z,1520526381.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:21.596Z,1520526381.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:21.967Z,1520526381.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:22.003Z,1520526382.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:22.371Z,1520526382.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:22.423Z,1520526382.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:22.777Z,1520526382.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:22.801Z,1520526382.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:23.181Z,1520526383.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:23.203Z,1520526383.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:23.593Z,1520526383.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:23.609Z,1520526383.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:23.968Z,1520526383.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:23.983Z,1520526383.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:24.363Z,1520526384.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:24.378Z,1520526384.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:24.771Z,1520526384.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:24.809Z,1520526384.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:25.171Z,1520526385.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:25.211Z,1520526385.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:25.581Z,1520526385.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:25.607Z,1520526385.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:25.985Z,1520526385.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:26.014Z,1520526386.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:26.385Z,1520526386.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:26.414Z,1520526386.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:26.770Z,1520526386.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:26.786Z,1520526386.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:27.168Z,1520526387.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:27.183Z,1520526387.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:27.571Z,1520526387.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:27.590Z,1520526387.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:27.971Z,1520526387.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:27.986Z,1520526387.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:28.373Z,1520526388.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:28.388Z,1520526388.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:28.785Z,1520526388.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:28.808Z,1520526388.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:29.177Z,1520526389.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:29.192Z,1520526389.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:29.585Z,1520526389.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:29.617Z,1520526389.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:29.972Z,1520526389.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:29.987Z,1520526389.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:30.367Z,1520526390.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:30.383Z,1520526390.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:30.771Z,1520526390.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:30.787Z,1520526390.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:31.172Z,1520526391.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:31.187Z,1520526391.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:31.581Z,1520526391.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:31.613Z,1520526391.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:31.985Z,1520526391.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:32.000Z,1520526392.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:32.381Z,1520526392.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:32.397Z,1520526392.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:32.773Z,1520526392.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:32.789Z,1520526392.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:33.172Z,1520526393.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:33.210Z,1520526393.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:33.575Z,1520526393.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:33.590Z,1520526393.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:33.975Z,1520526393.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:33.991Z,1520526393.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:34.372Z,1520526394.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:34.387Z,1520526394.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:34.781Z,1520526394.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:34.796Z,1520526394.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:35.180Z,1520526395.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:35.196Z,1520526395.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:35.581Z,1520526395.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:35.597Z,1520526395.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:35.975Z,1520526395.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:35.998Z,1520526395.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:36.376Z,1520526396.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:36.391Z,1520526396.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:36.769Z,1520526396.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:36.797Z,1520526396.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:37.175Z,1520526397.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:37.191Z,1520526397.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:37.582Z,1520526397.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:37.602Z,1520526397.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:37.985Z,1520526397.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:38.000Z,1520526398.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:38.385Z,1520526398.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:38.400Z,1520526398.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:38.773Z,1520526398.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:38.788Z,1520526398.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:39.169Z,1520526399.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:39.191Z,1520526399.191 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:39.191Z,1520526399.191 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 174
2018-03-08T16:26:39.191Z,1520526399.191 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T16:26:39.193Z,1520526399.193 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:39.193Z,1520526399.193 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 174
2018-03-08T16:26:39.193Z,1520526399.193 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T16:26:39.195Z,1520526399.195 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:39.195Z,1520526399.195 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 174
2018-03-08T16:26:39.195Z,1520526399.195 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T16:26:39.207Z,1520526399.207 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T16:26:39.207Z,1520526399.207 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T16:26:39.207Z,1520526399.207 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T16:26:39.563Z,1520526399.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:39.625Z,1520526399.625 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T16:26:39.626Z,1520526399.626 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 174
2018-03-08T16:26:39.626Z,1520526399.626 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T16:26:39.626Z,1520526399.626 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 174
2018-03-08T16:26:39.627Z,1520526399.627 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T16:26:39.627Z,1520526399.627 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 174
2018-03-08T16:26:39.968Z,1520526399.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:39.997Z,1520526399.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T16:26:39.997Z,1520526399.997 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:26:39.997Z,1520526399.997 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:26:39.998Z,1520526399.998 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T16:26:39.998Z,1520526399.998 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:26:39.999Z,1520526399.999 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:26:39.999Z,1520526399.999 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T16:26:39.999Z,1520526399.999 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:26:39.000Z,1520526400.000 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:26:40.363Z,1520526400.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:40.402Z,1520526400.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T16:26:40.403Z,1520526400.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:40.791Z,1520526400.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:40.806Z,1520526400.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T16:26:40.807Z,1520526400.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:41.177Z,1520526401.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:41.213Z,1520526401.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T16:26:41.214Z,1520526401.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:41.577Z,1520526401.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:41.603Z,1520526401.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T16:26:41.604Z,1520526401.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:41.969Z,1520526401.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:41.984Z,1520526401.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T16:26:41.997Z,1520526401.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:42.371Z,1520526402.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:42.387Z,1520526402.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T16:26:42.388Z,1520526402.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:42.769Z,1520526402.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:42.784Z,1520526402.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T16:26:42.785Z,1520526402.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:43.167Z,1520526403.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:43.187Z,1520526403.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T16:26:43.193Z,1520526403.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:43.586Z,1520526403.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:43.617Z,1520526403.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T16:26:43.618Z,1520526403.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:43.981Z,1520526403.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:43.996Z,1520526403.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T16:26:43.998Z,1520526403.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:44.377Z,1520526404.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:44.393Z,1520526404.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T16:26:44.394Z,1520526404.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:44.397Z,1520526404.397 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T16:26:44.397Z,1520526404.397 [Default:CheckIn:C.Wait] Stopped
2018-03-08T16:26:44.397Z,1520526404.397 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T16:26:44.397Z,1520526404.397 [Default:CheckIn:D] Running Loop=1
2018-03-08T16:26:44.770Z,1520526404.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:44.786Z,1520526404.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T16:26:44.787Z,1520526404.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:44.791Z,1520526404.791 [Default:CheckIn:D] Stopped
2018-03-08T16:26:44.791Z,1520526404.791 [Default:CheckIn:E] Running Loop=1
2018-03-08T16:26:45.171Z,1520526405.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:45.186Z,1520526405.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T16:26:45.187Z,1520526405.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:45.190Z,1520526405.190 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 520.999772 min 
2018-03-08T16:26:45.190Z,1520526405.190 [Default:CheckIn:E] Stopped
2018-03-08T16:26:45.190Z,1520526405.190 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T16:26:45.190Z,1520526405.190 [Default:CheckIn] Stopped
2018-03-08T16:26:45.191Z,1520526405.191 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T16:26:45.191Z,1520526405.191 [Default:CheckIn](INFO): Running loop #51
2018-03-08T16:26:45.191Z,1520526405.191 [Default:CheckIn] Running Loop=51
2018-03-08T16:26:45.191Z,1520526405.191 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T16:26:45.191Z,1520526405.191 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T16:26:48.276Z,1520526408.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:48.292Z,1520526408.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-03-08T16:26:48.293Z,1520526408.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:48.385Z,1520526408.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:48.428Z,1520526408.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T16:26:48.429Z,1520526408.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:48.769Z,1520526408.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:48.784Z,1520526408.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T16:26:48.785Z,1520526408.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:49.173Z,1520526409.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:49.188Z,1520526409.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T16:26:49.189Z,1520526409.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:49.553Z,1520526409.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:49.585Z,1520526409.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T16:26:49.586Z,1520526409.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:49.951Z,1520526409.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:49.984Z,1520526409.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T16:26:49.985Z,1520526409.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:50.352Z,1520526410.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:50.386Z,1520526410.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T16:26:50.387Z,1520526410.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:50.744Z,1520526410.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:50.759Z,1520526410.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T16:26:50.761Z,1520526410.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:51.151Z,1520526411.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:51.186Z,1520526411.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T16:26:51.187Z,1520526411.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:51.565Z,1520526411.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:51.591Z,1520526411.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T16:26:51.592Z,1520526411.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:51.965Z,1520526411.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:51.989Z,1520526411.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T16:26:51.990Z,1520526411.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:52.365Z,1520526412.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:52.394Z,1520526412.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T16:26:52.395Z,1520526412.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:52.751Z,1520526412.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:52.765Z,1520526412.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T16:26:52.766Z,1520526412.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:53.140Z,1520526413.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:53.167Z,1520526413.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T16:26:53.168Z,1520526413.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:53.552Z,1520526413.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:53.567Z,1520526413.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T16:26:53.568Z,1520526413.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:53.948Z,1520526413.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:53.963Z,1520526413.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T16:26:53.963Z,1520526413.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:54.347Z,1520526414.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:54.363Z,1520526414.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T16:26:54.364Z,1520526414.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:54.757Z,1520526414.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:54.772Z,1520526414.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T16:26:54.773Z,1520526414.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:55.165Z,1520526415.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:55.193Z,1520526415.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T16:26:55.194Z,1520526415.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:55.556Z,1520526415.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:55.578Z,1520526415.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T16:26:55.579Z,1520526415.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:55.955Z,1520526415.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:55.970Z,1520526415.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T16:26:55.971Z,1520526415.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:56.352Z,1520526416.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:56.366Z,1520526416.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T16:26:56.367Z,1520526416.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:56.755Z,1520526416.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:56.770Z,1520526416.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T16:26:56.771Z,1520526416.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:57.156Z,1520526417.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:57.171Z,1520526417.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T16:26:57.172Z,1520526417.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:57.561Z,1520526417.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:57.576Z,1520526417.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T16:26:57.577Z,1520526417.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:57.957Z,1520526417.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:57.978Z,1520526417.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T16:26:57.979Z,1520526417.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:58.357Z,1520526418.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:58.372Z,1520526418.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T16:26:58.373Z,1520526418.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:58.755Z,1520526418.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:58.770Z,1520526418.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T16:26:58.771Z,1520526418.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:59.143Z,1520526419.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:59.169Z,1520526419.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T16:26:59.170Z,1520526419.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:59.551Z,1520526419.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:59.566Z,1520526419.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:26:59.955Z,1520526419.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:26:59.970Z,1520526419.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:00.355Z,1520526420.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:00.370Z,1520526420.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:00.757Z,1520526420.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:00.773Z,1520526420.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:01.163Z,1520526421.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:01.178Z,1520526421.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:01.557Z,1520526421.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:01.572Z,1520526421.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:01.955Z,1520526421.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:01.970Z,1520526421.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:02.352Z,1520526422.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:02.367Z,1520526422.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:02.755Z,1520526422.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:02.774Z,1520526422.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:03.155Z,1520526423.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:03.170Z,1520526423.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:03.561Z,1520526423.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:03.577Z,1520526423.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:03.956Z,1520526423.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:03.972Z,1520526423.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:04.356Z,1520526424.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:04.378Z,1520526424.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:04.756Z,1520526424.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:04.771Z,1520526424.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:05.147Z,1520526425.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:05.162Z,1520526425.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:05.551Z,1520526425.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:05.566Z,1520526425.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:05.953Z,1520526425.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:05.969Z,1520526425.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:06.351Z,1520526426.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:06.366Z,1520526426.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:06.769Z,1520526426.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:06.805Z,1520526426.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:07.161Z,1520526427.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:07.177Z,1520526427.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:07.557Z,1520526427.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:07.573Z,1520526427.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:07.955Z,1520526427.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:07.970Z,1520526427.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:08.356Z,1520526428.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:08.371Z,1520526428.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:08.744Z,1520526428.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:08.772Z,1520526428.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:09.155Z,1520526429.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:09.170Z,1520526429.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:09.565Z,1520526429.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:09.581Z,1520526429.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:09.964Z,1520526429.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:09.986Z,1520526429.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:10.364Z,1520526430.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:10.386Z,1520526430.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:10.757Z,1520526430.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:10.773Z,1520526430.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:11.139Z,1520526431.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:11.171Z,1520526431.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:11.552Z,1520526431.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:11.567Z,1520526431.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:11.951Z,1520526431.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:11.971Z,1520526431.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:12.339Z,1520526432.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:12.370Z,1520526432.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:12.765Z,1520526432.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:12.786Z,1520526432.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:13.165Z,1520526433.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:13.180Z,1520526433.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:13.565Z,1520526433.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:13.586Z,1520526433.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:13.956Z,1520526433.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:13.971Z,1520526433.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:14.343Z,1520526434.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:14.371Z,1520526434.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:14.746Z,1520526434.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:14.773Z,1520526434.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:15.160Z,1520526435.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:15.182Z,1520526435.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:15.572Z,1520526435.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:15.594Z,1520526435.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:15.969Z,1520526435.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:15.985Z,1520526435.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:16.367Z,1520526436.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:16.383Z,1520526436.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:16.748Z,1520526436.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:16.776Z,1520526436.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:17.143Z,1520526437.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:17.178Z,1520526437.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:17.546Z,1520526437.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:17.582Z,1520526437.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:17.948Z,1520526437.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:17.977Z,1520526437.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:18.361Z,1520526438.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:18.376Z,1520526438.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:18.768Z,1520526438.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:18.783Z,1520526438.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:19.162Z,1520526439.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:19.187Z,1520526439.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:19.566Z,1520526439.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:19.582Z,1520526439.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:19.943Z,1520526439.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:19.983Z,1520526439.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:20.348Z,1520526440.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:20.381Z,1520526440.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:20.747Z,1520526440.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:20.779Z,1520526440.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:21.143Z,1520526441.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:21.179Z,1520526441.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:21.554Z,1520526441.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:21.588Z,1520526441.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:21.970Z,1520526441.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:21.985Z,1520526441.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:22.376Z,1520526442.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:22.391Z,1520526442.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:22.743Z,1520526442.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:22.758Z,1520526442.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:23.147Z,1520526443.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:23.162Z,1520526443.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:23.551Z,1520526443.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:23.587Z,1520526443.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:23.950Z,1520526443.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:23.965Z,1520526443.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:24.348Z,1520526444.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:24.363Z,1520526444.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:24.765Z,1520526444.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:24.787Z,1520526444.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:25.153Z,1520526445.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:25.188Z,1520526445.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:25.554Z,1520526445.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:25.599Z,1520526445.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:25.953Z,1520526445.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:25.999Z,1520526445.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:26.358Z,1520526446.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:26.432Z,1520526446.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:26.743Z,1520526446.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:26.770Z,1520526446.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:27.143Z,1520526447.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:27.175Z,1520526447.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:27.562Z,1520526447.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:27.577Z,1520526447.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:27.968Z,1520526447.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:27.983Z,1520526447.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:28.365Z,1520526448.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:28.380Z,1520526448.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:28.743Z,1520526448.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:28.769Z,1520526448.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:29.155Z,1520526449.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:29.170Z,1520526449.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:29.543Z,1520526449.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:29.575Z,1520526449.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:29.943Z,1520526449.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:29.976Z,1520526449.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:30.355Z,1520526450.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:30.370Z,1520526450.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:30.762Z,1520526450.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:30.777Z,1520526450.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:31.161Z,1520526451.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:31.189Z,1520526451.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:31.562Z,1520526451.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:31.577Z,1520526451.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:31.943Z,1520526451.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:31.975Z,1520526451.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:32.355Z,1520526452.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:32.370Z,1520526452.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:32.757Z,1520526452.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:32.773Z,1520526452.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:33.143Z,1520526453.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:33.175Z,1520526453.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:33.565Z,1520526453.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:33.580Z,1520526453.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:33.968Z,1520526453.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:33.991Z,1520526453.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:34.365Z,1520526454.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:34.380Z,1520526454.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:34.743Z,1520526454.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:34.779Z,1520526454.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:35.155Z,1520526455.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:35.170Z,1520526455.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:35.543Z,1520526455.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:35.575Z,1520526455.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:35.939Z,1520526455.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:35.966Z,1520526455.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:36.355Z,1520526456.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:36.370Z,1520526456.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:36.761Z,1520526456.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:36.777Z,1520526456.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:37.165Z,1520526457.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:37.180Z,1520526457.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:37.565Z,1520526457.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:37.586Z,1520526457.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:37.955Z,1520526457.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:37.970Z,1520526457.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:38.355Z,1520526458.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:38.370Z,1520526458.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:38.756Z,1520526458.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:38.771Z,1520526458.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:39.143Z,1520526459.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:39.175Z,1520526459.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:39.563Z,1520526459.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:39.578Z,1520526459.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:39.968Z,1520526459.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:39.990Z,1520526459.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:40.365Z,1520526460.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:40.386Z,1520526460.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:40.755Z,1520526460.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:40.770Z,1520526460.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:41.155Z,1520526461.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:41.170Z,1520526461.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:41.543Z,1520526461.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:41.580Z,1520526461.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:41.956Z,1520526461.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:41.971Z,1520526461.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:42.341Z,1520526462.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:42.368Z,1520526462.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:42.761Z,1520526462.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:42.777Z,1520526462.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:43.172Z,1520526463.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:43.187Z,1520526463.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:43.565Z,1520526463.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:43.580Z,1520526463.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:43.943Z,1520526463.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:43.974Z,1520526463.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:44.357Z,1520526464.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:44.371Z,1520526464.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:44.756Z,1520526464.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:44.771Z,1520526464.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:45.143Z,1520526465.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:45.178Z,1520526465.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:45.568Z,1520526465.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:45.583Z,1520526465.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:48.663Z,1520526468.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:48.679Z,1520526468.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:48.793Z,1520526468.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:48.835Z,1520526468.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:49.127Z,1520526469.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:49.144Z,1520526469.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:49.531Z,1520526469.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:49.547Z,1520526469.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:49.940Z,1520526469.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:49.975Z,1520526469.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:50.331Z,1520526470.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:50.347Z,1520526470.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:50.745Z,1520526470.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:50.771Z,1520526470.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:51.141Z,1520526471.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:51.170Z,1520526471.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:51.550Z,1520526471.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:51.587Z,1520526471.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:51.968Z,1520526471.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:52.022Z,1520526472.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:52.335Z,1520526472.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:52.422Z,1520526472.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:52.751Z,1520526472.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:52.777Z,1520526472.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:53.129Z,1520526473.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:53.159Z,1520526473.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:53.542Z,1520526473.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:53.558Z,1520526473.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:53.947Z,1520526473.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:53.962Z,1520526473.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:54.341Z,1520526474.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:54.357Z,1520526474.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:54.739Z,1520526474.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:54.756Z,1520526474.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:55.139Z,1520526475.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:55.155Z,1520526475.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:55.532Z,1520526475.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:55.547Z,1520526475.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:55.935Z,1520526475.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:55.954Z,1520526475.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:56.334Z,1520526476.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:56.353Z,1520526476.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:56.743Z,1520526476.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:56.758Z,1520526476.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:57.145Z,1520526477.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:57.161Z,1520526477.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:57.542Z,1520526477.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:57.562Z,1520526477.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:57.940Z,1520526477.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:57.955Z,1520526477.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:58.337Z,1520526478.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:58.358Z,1520526478.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:58.740Z,1520526478.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:58.755Z,1520526478.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:59.131Z,1520526479.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:59.147Z,1520526479.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:59.540Z,1520526479.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:59.563Z,1520526479.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:27:59.945Z,1520526479.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:27:59.963Z,1520526479.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:00.345Z,1520526480.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:00.360Z,1520526480.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:00.739Z,1520526480.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:00.760Z,1520526480.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:01.139Z,1520526481.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:01.158Z,1520526481.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:01.537Z,1520526481.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:01.552Z,1520526481.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:01.939Z,1520526481.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:01.954Z,1520526481.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:02.331Z,1520526482.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:02.362Z,1520526482.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:02.744Z,1520526482.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:02.759Z,1520526482.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:03.145Z,1520526483.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:03.161Z,1520526483.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:03.545Z,1520526483.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:03.560Z,1520526483.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:03.939Z,1520526483.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:03.954Z,1520526483.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:04.339Z,1520526484.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:04.358Z,1520526484.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:04.740Z,1520526484.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:04.755Z,1520526484.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:05.131Z,1520526485.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:05.150Z,1520526485.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:05.544Z,1520526485.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:05.561Z,1520526485.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:05.945Z,1520526485.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:05.961Z,1520526485.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:06.346Z,1520526486.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:06.360Z,1520526486.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:06.739Z,1520526486.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:06.758Z,1520526486.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:07.139Z,1520526487.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:07.158Z,1520526487.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:07.533Z,1520526487.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:07.548Z,1520526487.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:07.940Z,1520526487.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:07.955Z,1520526487.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:08.340Z,1520526488.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:08.356Z,1520526488.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:08.745Z,1520526488.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:08.760Z,1520526488.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:09.146Z,1520526489.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:09.161Z,1520526489.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:09.544Z,1520526489.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:09.559Z,1520526489.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:09.939Z,1520526489.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:09.954Z,1520526489.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:10.339Z,1520526490.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:10.362Z,1520526490.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:10.739Z,1520526490.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:10.755Z,1520526490.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:11.140Z,1520526491.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:11.155Z,1520526491.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:11.544Z,1520526491.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:11.560Z,1520526491.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:11.944Z,1520526491.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:11.959Z,1520526491.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:12.345Z,1520526492.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:12.359Z,1520526492.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:12.737Z,1520526492.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:12.752Z,1520526492.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:13.140Z,1520526493.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:13.155Z,1520526493.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:13.536Z,1520526493.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:13.550Z,1520526493.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:13.940Z,1520526493.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:13.956Z,1520526493.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:14.360Z,1520526494.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:14.432Z,1520526494.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:14.745Z,1520526494.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:14.766Z,1520526494.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:15.145Z,1520526495.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:15.166Z,1520526495.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:15.544Z,1520526495.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:15.566Z,1520526495.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:15.938Z,1520526495.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:15.953Z,1520526495.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:16.335Z,1520526496.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:16.357Z,1520526496.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:16.740Z,1520526496.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:16.755Z,1520526496.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:17.140Z,1520526497.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:17.154Z,1520526497.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:17.544Z,1520526497.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:17.560Z,1520526497.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:17.946Z,1520526497.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:17.961Z,1520526497.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:18.345Z,1520526498.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:18.360Z,1520526498.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:18.739Z,1520526498.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:18.755Z,1520526498.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:19.139Z,1520526499.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:19.159Z,1520526499.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:19.539Z,1520526499.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:19.554Z,1520526499.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:19.941Z,1520526499.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:19.956Z,1520526499.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:20.335Z,1520526500.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:20.350Z,1520526500.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:20.745Z,1520526500.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:20.760Z,1520526500.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:21.144Z,1520526501.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:21.159Z,1520526501.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:21.544Z,1520526501.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:21.560Z,1520526501.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:21.939Z,1520526501.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:21.954Z,1520526501.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:22.339Z,1520526502.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:22.358Z,1520526502.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:22.741Z,1520526502.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:22.756Z,1520526502.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:23.136Z,1520526503.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:23.150Z,1520526503.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:23.544Z,1520526503.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:23.560Z,1520526503.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:23.945Z,1520526503.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:23.961Z,1520526503.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:24.345Z,1520526504.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:24.359Z,1520526504.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:24.740Z,1520526504.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:24.762Z,1520526504.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:25.139Z,1520526505.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:25.162Z,1520526505.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:25.540Z,1520526505.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:25.555Z,1520526505.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:25.937Z,1520526505.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:25.952Z,1520526505.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:26.339Z,1520526506.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:26.354Z,1520526506.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:26.745Z,1520526506.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:26.761Z,1520526506.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:27.145Z,1520526507.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:27.161Z,1520526507.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:27.544Z,1520526507.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:27.566Z,1520526507.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:27.941Z,1520526507.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:27.956Z,1520526507.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:28.337Z,1520526508.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:28.352Z,1520526508.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:28.736Z,1520526508.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:28.751Z,1520526508.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:29.141Z,1520526509.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:29.156Z,1520526509.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:29.546Z,1520526509.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:29.561Z,1520526509.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:29.945Z,1520526509.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:29.961Z,1520526509.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:30.346Z,1520526510.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:30.361Z,1520526510.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:30.728Z,1520526510.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:30.759Z,1520526510.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:31.140Z,1520526511.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:31.155Z,1520526511.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:31.523Z,1520526511.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:31.561Z,1520526511.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:31.941Z,1520526511.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:31.957Z,1520526511.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:32.341Z,1520526512.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:32.362Z,1520526512.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:32.752Z,1520526512.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:32.767Z,1520526512.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:33.141Z,1520526513.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:33.162Z,1520526513.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:33.550Z,1520526513.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:33.566Z,1520526513.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:33.923Z,1520526513.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:33.951Z,1520526513.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:34.338Z,1520526514.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:34.354Z,1520526514.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:34.735Z,1520526514.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:34.755Z,1520526514.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:35.141Z,1520526515.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:35.156Z,1520526515.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:35.549Z,1520526515.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:35.567Z,1520526515.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:35.952Z,1520526515.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:35.968Z,1520526515.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:36.354Z,1520526516.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:36.375Z,1520526516.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:36.720Z,1520526516.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:36.755Z,1520526516.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:37.127Z,1520526517.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:37.155Z,1520526517.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:37.523Z,1520526517.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:37.555Z,1520526517.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:37.927Z,1520526517.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:37.964Z,1520526517.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:38.326Z,1520526518.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:38.363Z,1520526518.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:38.750Z,1520526518.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:38.766Z,1520526518.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:39.154Z,1520526519.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:39.175Z,1520526519.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:39.549Z,1520526519.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:39.565Z,1520526519.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:39.927Z,1520526519.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:39.954Z,1520526519.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:40.323Z,1520526520.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:40.359Z,1520526520.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:40.727Z,1520526520.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:40.743Z,1520526520.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:41.130Z,1520526521.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:41.146Z,1520526521.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:41.537Z,1520526521.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:41.569Z,1520526521.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:41.949Z,1520526521.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:41.978Z,1520526521.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:42.345Z,1520526522.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:42.374Z,1520526522.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:42.728Z,1520526522.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:42.744Z,1520526522.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:43.134Z,1520526523.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:43.174Z,1520526523.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:43.535Z,1520526523.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:43.550Z,1520526523.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:43.933Z,1520526523.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:43.949Z,1520526523.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:44.335Z,1520526524.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:44.358Z,1520526524.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:44.749Z,1520526524.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:44.764Z,1520526524.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:45.136Z,1520526525.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:45.151Z,1520526525.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:45.538Z,1520526525.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:45.553Z,1520526525.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:45.935Z,1520526525.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:45.951Z,1520526525.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:49.036Z,1520526529.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:49.052Z,1520526529.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:49.152Z,1520526529.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:49.197Z,1520526529.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:49.541Z,1520526529.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:49.556Z,1520526529.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:49.930Z,1520526529.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:49.946Z,1520526529.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:50.341Z,1520526530.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:50.356Z,1520526530.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:50.710Z,1520526530.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:50.743Z,1520526530.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:51.112Z,1520526531.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:51.151Z,1520526531.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:51.519Z,1520526531.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:51.546Z,1520526531.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:51.915Z,1520526531.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:51.946Z,1520526531.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:52.319Z,1520526532.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:52.346Z,1520526532.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:52.738Z,1520526532.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:52.754Z,1520526532.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:53.137Z,1520526533.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:53.152Z,1520526533.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:53.538Z,1520526533.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:53.553Z,1520526533.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:53.915Z,1520526533.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:53.947Z,1520526533.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:54.315Z,1520526534.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:54.350Z,1520526534.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:54.719Z,1520526534.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:54.747Z,1520526534.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:55.118Z,1520526535.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:55.145Z,1520526535.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:55.520Z,1520526535.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:55.549Z,1520526535.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:55.934Z,1520526535.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:55.950Z,1520526535.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:56.338Z,1520526536.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:56.353Z,1520526536.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:56.714Z,1520526536.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:56.761Z,1520526536.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:57.111Z,1520526537.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:57.134Z,1520526537.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:57.515Z,1520526537.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:57.551Z,1520526537.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:57.919Z,1520526537.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:57.950Z,1520526537.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:58.308Z,1520526538.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:58.325Z,1520526538.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:58.729Z,1520526538.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:58.756Z,1520526538.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:59.129Z,1520526539.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:59.154Z,1520526539.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:59.528Z,1520526539.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:59.555Z,1520526539.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:28:59.915Z,1520526539.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:28:59.951Z,1520526539.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:00.318Z,1520526540.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:00.334Z,1520526540.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:00.719Z,1520526540.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:00.735Z,1520526540.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:01.122Z,1520526541.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:01.162Z,1520526541.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:01.533Z,1520526541.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:01.565Z,1520526541.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:01.921Z,1520526541.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:01.936Z,1520526541.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:02.333Z,1520526542.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:02.369Z,1520526542.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:02.719Z,1520526542.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:02.734Z,1520526542.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:03.120Z,1520526543.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:03.136Z,1520526543.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:03.519Z,1520526543.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:03.547Z,1520526543.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:03.924Z,1520526543.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:03.939Z,1520526543.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:04.324Z,1520526544.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:04.340Z,1520526544.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:04.729Z,1520526544.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:04.745Z,1520526544.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:05.138Z,1520526545.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:05.173Z,1520526545.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:05.526Z,1520526545.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:05.541Z,1520526545.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:05.925Z,1520526545.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:05.940Z,1520526545.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:06.324Z,1520526546.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:06.339Z,1520526546.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:06.725Z,1520526546.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:06.741Z,1520526546.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:07.122Z,1520526547.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:07.137Z,1520526547.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:07.529Z,1520526547.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:07.544Z,1520526547.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:07.926Z,1520526547.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:07.942Z,1520526547.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:08.326Z,1520526548.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:08.341Z,1520526548.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:08.723Z,1520526548.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:08.738Z,1520526548.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:09.120Z,1520526549.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:09.136Z,1520526549.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:09.524Z,1520526549.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:09.540Z,1520526549.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:09.920Z,1520526549.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:09.936Z,1520526549.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:10.324Z,1520526550.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:10.340Z,1520526550.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:10.725Z,1520526550.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:10.743Z,1520526550.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:11.137Z,1520526551.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:11.170Z,1520526551.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:11.537Z,1520526551.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:11.570Z,1520526551.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:11.926Z,1520526551.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:11.947Z,1520526551.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:12.326Z,1520526552.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:12.341Z,1520526552.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:12.728Z,1520526552.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:12.743Z,1520526552.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:13.126Z,1520526553.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:13.141Z,1520526553.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:13.529Z,1520526553.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:13.545Z,1520526553.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:13.928Z,1520526553.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:13.945Z,1520526553.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:14.328Z,1520526554.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:14.344Z,1520526554.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:14.727Z,1520526554.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:14.742Z,1520526554.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:15.121Z,1520526555.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:15.137Z,1520526555.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:15.523Z,1520526555.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:15.542Z,1520526555.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:15.923Z,1520526555.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:15.938Z,1520526555.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:16.326Z,1520526556.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:16.342Z,1520526556.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:16.730Z,1520526556.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:16.746Z,1520526556.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:17.133Z,1520526557.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:17.148Z,1520526557.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:17.529Z,1520526557.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:17.544Z,1520526557.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:17.926Z,1520526557.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:17.941Z,1520526557.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:18.325Z,1520526558.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:18.340Z,1520526558.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:18.727Z,1520526558.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:18.743Z,1520526558.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:19.126Z,1520526559.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:19.141Z,1520526559.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:19.533Z,1520526559.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:19.548Z,1520526559.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:19.928Z,1520526559.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:19.944Z,1520526559.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:20.328Z,1520526560.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:20.351Z,1520526560.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:20.726Z,1520526560.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:20.740Z,1520526560.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:21.121Z,1520526561.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:21.137Z,1520526561.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:21.522Z,1520526561.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:21.541Z,1520526561.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:21.924Z,1520526561.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:21.939Z,1520526561.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:22.326Z,1520526562.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:22.342Z,1520526562.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:22.729Z,1520526562.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:22.745Z,1520526562.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:23.133Z,1520526563.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:23.148Z,1520526563.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:23.529Z,1520526563.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:23.551Z,1520526563.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:23.926Z,1520526563.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:23.941Z,1520526563.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:24.326Z,1520526564.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:24.341Z,1520526564.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:24.727Z,1520526564.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:24.743Z,1520526564.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:25.126Z,1520526565.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:25.141Z,1520526565.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:25.529Z,1520526565.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:25.544Z,1520526565.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:25.929Z,1520526565.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:25.944Z,1520526565.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:26.329Z,1520526566.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:26.344Z,1520526566.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:26.722Z,1520526566.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:26.737Z,1520526566.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:27.121Z,1520526567.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:27.137Z,1520526567.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:27.523Z,1520526567.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:27.538Z,1520526567.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:27.923Z,1520526567.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:27.938Z,1520526567.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:28.326Z,1520526568.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:28.342Z,1520526568.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:28.729Z,1520526568.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:28.745Z,1520526568.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:29.133Z,1520526569.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:29.148Z,1520526569.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:29.529Z,1520526569.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:29.544Z,1520526569.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:29.926Z,1520526569.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:29.941Z,1520526569.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:30.323Z,1520526570.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:30.338Z,1520526570.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:30.727Z,1520526570.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:30.743Z,1520526570.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:31.123Z,1520526571.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:31.139Z,1520526571.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:31.528Z,1520526571.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:31.551Z,1520526571.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:31.929Z,1520526571.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:31.944Z,1520526571.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:32.329Z,1520526572.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:32.345Z,1520526572.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:32.726Z,1520526572.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:32.741Z,1520526572.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:33.121Z,1520526573.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:33.137Z,1520526573.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:33.521Z,1520526573.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:33.540Z,1520526573.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:33.927Z,1520526573.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:33.942Z,1520526573.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:34.326Z,1520526574.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:34.342Z,1520526574.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:34.729Z,1520526574.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:34.745Z,1520526574.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:35.133Z,1520526575.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:35.149Z,1520526575.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:35.529Z,1520526575.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:35.545Z,1520526575.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:35.926Z,1520526575.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:35.947Z,1520526575.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:36.326Z,1520526576.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:36.347Z,1520526576.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:36.728Z,1520526576.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:36.743Z,1520526576.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:37.123Z,1520526577.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:37.138Z,1520526577.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:37.545Z,1520526577.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:37.575Z,1520526577.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:37.933Z,1520526577.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:37.949Z,1520526577.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:38.332Z,1520526578.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:38.351Z,1520526578.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:38.728Z,1520526578.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:38.751Z,1520526578.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:39.127Z,1520526579.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:39.143Z,1520526579.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:39.527Z,1520526579.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:39.542Z,1520526579.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:39.926Z,1520526579.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:39.947Z,1520526579.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:40.327Z,1520526580.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:40.343Z,1520526580.343 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:40.343Z,1520526580.343 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 175
2018-03-08T16:29:40.343Z,1520526580.343 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T16:29:40.345Z,1520526580.345 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:40.345Z,1520526580.345 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 175
2018-03-08T16:29:40.345Z,1520526580.345 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T16:29:40.347Z,1520526580.347 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:40.347Z,1520526580.347 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 175
2018-03-08T16:29:40.347Z,1520526580.347 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T16:29:40.375Z,1520526580.375 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T16:29:40.375Z,1520526580.375 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T16:29:40.375Z,1520526580.375 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T16:29:40.732Z,1520526580.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:40.758Z,1520526580.758 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T16:29:40.759Z,1520526580.759 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 175
2018-03-08T16:29:40.759Z,1520526580.759 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T16:29:40.759Z,1520526580.759 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 175
2018-03-08T16:29:40.760Z,1520526580.760 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T16:29:40.760Z,1520526580.760 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 175
2018-03-08T16:29:41.137Z,1520526581.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:41.151Z,1520526581.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T16:29:41.151Z,1520526581.151 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:29:41.152Z,1520526581.152 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:29:41.152Z,1520526581.152 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T16:29:41.153Z,1520526581.153 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:29:41.153Z,1520526581.153 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:29:41.153Z,1520526581.153 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T16:29:41.154Z,1520526581.154 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:29:41.154Z,1520526581.154 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:29:41.538Z,1520526581.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:41.554Z,1520526581.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T16:29:41.554Z,1520526581.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:41.915Z,1520526581.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:41.954Z,1520526581.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T16:29:41.955Z,1520526581.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:42.319Z,1520526582.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:42.345Z,1520526582.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T16:29:42.346Z,1520526582.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:42.719Z,1520526582.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:42.747Z,1520526582.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T16:29:42.748Z,1520526582.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:43.115Z,1520526583.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:43.142Z,1520526583.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T16:29:43.142Z,1520526583.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:43.538Z,1520526583.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:43.553Z,1520526583.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T16:29:43.554Z,1520526583.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:43.942Z,1520526583.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:43.957Z,1520526583.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T16:29:43.958Z,1520526583.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:44.339Z,1520526584.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:44.354Z,1520526584.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T16:29:44.355Z,1520526584.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:44.715Z,1520526584.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:44.742Z,1520526584.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T16:29:44.743Z,1520526584.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:45.111Z,1520526585.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:45.151Z,1520526585.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T16:29:45.152Z,1520526585.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:45.520Z,1520526585.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:45.547Z,1520526585.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T16:29:45.549Z,1520526585.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:45.912Z,1520526585.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:45.951Z,1520526585.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T16:29:45.951Z,1520526585.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:46.319Z,1520526586.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:46.347Z,1520526586.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T16:29:46.348Z,1520526586.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:49.445Z,1520526589.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:49.461Z,1520526589.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-03-08T16:29:49.462Z,1520526589.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:49.580Z,1520526589.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:49.614Z,1520526589.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-08T16:29:49.615Z,1520526589.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:49.966Z,1520526589.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:49.994Z,1520526589.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-08T16:29:49.995Z,1520526589.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:50.343Z,1520526590.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:50.378Z,1520526590.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T16:29:50.378Z,1520526590.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:50.749Z,1520526590.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:50.765Z,1520526590.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T16:29:50.766Z,1520526590.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:51.148Z,1520526591.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:51.167Z,1520526591.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T16:29:51.168Z,1520526591.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:51.562Z,1520526591.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:51.596Z,1520526591.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T16:29:51.597Z,1520526591.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:51.953Z,1520526591.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:51.968Z,1520526591.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T16:29:51.970Z,1520526591.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:52.354Z,1520526592.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:52.369Z,1520526592.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T16:29:52.369Z,1520526592.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:52.748Z,1520526592.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:52.763Z,1520526592.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T16:29:52.765Z,1520526592.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:53.143Z,1520526593.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:53.158Z,1520526593.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T16:29:53.159Z,1520526593.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:53.546Z,1520526593.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:53.566Z,1520526593.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T16:29:53.567Z,1520526593.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:53.949Z,1520526593.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:53.970Z,1520526593.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T16:29:53.971Z,1520526593.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:54.351Z,1520526594.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:54.366Z,1520526594.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T16:29:54.367Z,1520526594.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:54.754Z,1520526594.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:54.769Z,1520526594.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T16:29:54.770Z,1520526594.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:55.158Z,1520526595.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:55.173Z,1520526595.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T16:29:55.174Z,1520526595.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:55.553Z,1520526595.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:55.569Z,1520526595.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T16:29:55.570Z,1520526595.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:55.951Z,1520526595.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:55.967Z,1520526595.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T16:29:55.968Z,1520526595.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:56.347Z,1520526596.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:56.363Z,1520526596.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T16:29:56.364Z,1520526596.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:56.747Z,1520526596.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:56.762Z,1520526596.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T16:29:56.763Z,1520526596.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:57.149Z,1520526597.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:57.170Z,1520526597.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T16:29:57.171Z,1520526597.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:57.556Z,1520526597.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:57.571Z,1520526597.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T16:29:57.572Z,1520526597.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:57.956Z,1520526597.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:57.971Z,1520526597.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T16:29:57.972Z,1520526597.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:58.358Z,1520526598.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:58.378Z,1520526598.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T16:29:58.379Z,1520526598.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:58.750Z,1520526598.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:58.770Z,1520526598.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T16:29:58.771Z,1520526598.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:59.151Z,1520526599.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:59.167Z,1520526599.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T16:29:59.167Z,1520526599.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:59.552Z,1520526599.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:59.567Z,1520526599.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T16:29:59.568Z,1520526599.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:29:59.935Z,1520526599.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:29:59.967Z,1520526599.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T16:29:59.968Z,1520526599.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:00.334Z,1520526600.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:00.367Z,1520526600.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:00.761Z,1520526600.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:00.783Z,1520526600.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:01.160Z,1520526601.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:01.176Z,1520526601.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:01.561Z,1520526601.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:01.576Z,1520526601.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:01.953Z,1520526601.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:01.968Z,1520526601.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:02.335Z,1520526602.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:02.371Z,1520526602.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:02.751Z,1520526602.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:02.767Z,1520526602.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:03.139Z,1520526603.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:03.166Z,1520526603.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:03.552Z,1520526603.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:03.574Z,1520526603.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:03.964Z,1520526603.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:03.979Z,1520526603.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:04.365Z,1520526604.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:04.380Z,1520526604.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:04.751Z,1520526604.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:04.770Z,1520526604.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:05.138Z,1520526605.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:05.171Z,1520526605.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:05.539Z,1520526605.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:05.578Z,1520526605.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:05.939Z,1520526605.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:05.967Z,1520526605.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:06.334Z,1520526606.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:06.366Z,1520526606.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:06.762Z,1520526606.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:06.779Z,1520526606.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:07.157Z,1520526607.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:07.173Z,1520526607.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:07.553Z,1520526607.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:07.571Z,1520526607.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:07.943Z,1520526607.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:07.970Z,1520526607.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:08.335Z,1520526608.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:08.366Z,1520526608.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:08.740Z,1520526608.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:08.772Z,1520526608.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:09.143Z,1520526609.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:09.170Z,1520526609.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:09.545Z,1520526609.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:09.580Z,1520526609.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:09.957Z,1520526609.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:09.975Z,1520526609.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:10.362Z,1520526610.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:10.378Z,1520526610.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:10.735Z,1520526610.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:10.795Z,1520526610.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:11.142Z,1520526611.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:11.169Z,1520526611.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:11.543Z,1520526611.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:11.571Z,1520526611.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:11.935Z,1520526611.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:11.963Z,1520526611.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:12.342Z,1520526612.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:12.374Z,1520526612.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:12.761Z,1520526612.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:12.782Z,1520526612.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:13.149Z,1520526613.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:13.187Z,1520526613.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:13.553Z,1520526613.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:13.580Z,1520526613.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:13.943Z,1520526613.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:13.975Z,1520526613.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:14.343Z,1520526614.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:14.382Z,1520526614.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:14.747Z,1520526614.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:14.763Z,1520526614.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:15.147Z,1520526615.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:15.167Z,1520526615.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:15.561Z,1520526615.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:15.591Z,1520526615.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:15.957Z,1520526615.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:15.985Z,1520526615.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:16.353Z,1520526616.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:16.369Z,1520526616.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:16.748Z,1520526616.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:16.763Z,1520526616.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:17.142Z,1520526617.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:17.158Z,1520526617.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:17.547Z,1520526617.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:17.563Z,1520526617.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:17.941Z,1520526617.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:17.965Z,1520526617.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:18.352Z,1520526618.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:18.367Z,1520526618.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:18.722Z,1520526618.722 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T16:30:18.722Z,1520526618.722 [NAL9602] Data Fault, FailCount= 4
2018-03-08T16:30:18.723Z,1520526618.723 [NAL9602](ERROR): Data Fault
2018-03-08T16:30:18.750Z,1520526618.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:18.777Z,1520526618.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:18.798Z,1520526618.798 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T16:30:19.118Z,1520526619.118 [NAL9602](INFO): Powering down
2018-03-08T16:30:19.144Z,1520526619.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:19.171Z,1520526619.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:19.550Z,1520526619.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:19.565Z,1520526619.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:19.946Z,1520526619.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:19.967Z,1520526619.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:19.980Z,1520526619.980 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T16:30:19.980Z,1520526619.980 [NAL9602] No Fault, FailCount= 4
2018-03-08T16:30:20.341Z,1520526620.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:20.367Z,1520526620.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:20.743Z,1520526620.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:20.759Z,1520526620.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:21.159Z,1520526621.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:21.174Z,1520526621.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:21.534Z,1520526621.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:21.560Z,1520526621.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:21.936Z,1520526621.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:21.962Z,1520526621.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:22.341Z,1520526622.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:22.365Z,1520526622.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:22.734Z,1520526622.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:22.760Z,1520526622.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:23.144Z,1520526623.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:23.163Z,1520526623.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:23.541Z,1520526623.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:23.565Z,1520526623.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:23.949Z,1520526623.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:23.964Z,1520526623.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:24.351Z,1520526624.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:24.366Z,1520526624.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:24.741Z,1520526624.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:24.765Z,1520526624.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:25.134Z,1520526625.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:25.170Z,1520526625.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:25.551Z,1520526625.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:25.567Z,1520526625.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:25.941Z,1520526625.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:25.973Z,1520526625.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:26.350Z,1520526626.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:26.365Z,1520526626.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:26.737Z,1520526626.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:26.764Z,1520526626.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:27.143Z,1520526627.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:27.171Z,1520526627.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:27.538Z,1520526627.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:27.565Z,1520526627.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:27.937Z,1520526627.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:27.969Z,1520526627.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:28.343Z,1520526628.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:28.370Z,1520526628.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:28.738Z,1520526628.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:28.770Z,1520526628.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:29.136Z,1520526629.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:29.160Z,1520526629.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:29.542Z,1520526629.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:29.575Z,1520526629.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:29.939Z,1520526629.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:29.966Z,1520526629.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:30.342Z,1520526630.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:30.374Z,1520526630.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:30.742Z,1520526630.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:30.757Z,1520526630.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:31.142Z,1520526631.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:31.157Z,1520526631.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:31.547Z,1520526631.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:31.562Z,1520526631.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:31.946Z,1520526631.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:31.962Z,1520526631.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:32.348Z,1520526632.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:32.362Z,1520526632.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:32.744Z,1520526632.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:32.759Z,1520526632.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:33.145Z,1520526633.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:33.160Z,1520526633.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:33.547Z,1520526633.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:33.562Z,1520526633.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:33.939Z,1520526633.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:33.955Z,1520526633.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:34.347Z,1520526634.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:34.362Z,1520526634.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:34.748Z,1520526634.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:34.764Z,1520526634.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:35.140Z,1520526635.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:35.156Z,1520526635.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:35.547Z,1520526635.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:35.563Z,1520526635.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:35.943Z,1520526635.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:35.958Z,1520526635.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:36.345Z,1520526636.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:36.361Z,1520526636.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:36.745Z,1520526636.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:36.761Z,1520526636.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:37.147Z,1520526637.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:37.162Z,1520526637.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:37.547Z,1520526637.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:37.563Z,1520526637.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:37.947Z,1520526637.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:37.962Z,1520526637.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:38.343Z,1520526638.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:38.358Z,1520526638.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:38.740Z,1520526638.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:38.755Z,1520526638.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:39.147Z,1520526639.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:39.162Z,1520526639.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:39.543Z,1520526639.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:39.568Z,1520526639.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:39.943Z,1520526639.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:39.958Z,1520526639.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:40.345Z,1520526640.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:40.360Z,1520526640.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:40.747Z,1520526640.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:40.762Z,1520526640.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:41.140Z,1520526641.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:41.155Z,1520526641.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:41.548Z,1520526641.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:41.563Z,1520526641.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:41.943Z,1520526641.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:41.958Z,1520526641.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:42.343Z,1520526642.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:42.359Z,1520526642.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:42.747Z,1520526642.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:42.762Z,1520526642.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:43.143Z,1520526643.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:43.158Z,1520526643.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:43.543Z,1520526643.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:43.559Z,1520526643.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:43.947Z,1520526643.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:43.962Z,1520526643.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:44.343Z,1520526644.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:44.358Z,1520526644.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:44.743Z,1520526644.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:44.758Z,1520526644.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:45.147Z,1520526645.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:45.162Z,1520526645.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:45.545Z,1520526645.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:45.566Z,1520526645.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:45.944Z,1520526645.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:45.960Z,1520526645.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:46.348Z,1520526646.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:46.363Z,1520526646.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:49.421Z,1520526649.421 [NAL9602](INFO): Powering up NAL9602
2018-03-08T16:30:49.447Z,1520526649.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:49.463Z,1520526649.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:49.556Z,1520526649.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:49.601Z,1520526649.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:49.922Z,1520526649.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:49.952Z,1520526649.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:50.318Z,1520526650.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:50.352Z,1520526650.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:50.714Z,1520526650.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:50.729Z,1520526650.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:51.118Z,1520526651.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:51.134Z,1520526651.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:51.514Z,1520526651.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:51.534Z,1520526651.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:51.915Z,1520526651.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:51.931Z,1520526651.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:52.315Z,1520526652.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:52.330Z,1520526652.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:52.716Z,1520526652.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:52.732Z,1520526652.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:53.115Z,1520526653.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:53.131Z,1520526653.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:53.515Z,1520526653.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:53.530Z,1520526653.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:53.917Z,1520526653.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:53.932Z,1520526653.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:54.315Z,1520526654.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:54.331Z,1520526654.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:54.715Z,1520526654.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:54.730Z,1520526654.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:55.115Z,1520526655.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:55.131Z,1520526655.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:55.515Z,1520526655.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:55.531Z,1520526655.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:55.916Z,1520526655.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:55.931Z,1520526655.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:56.316Z,1520526656.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:56.331Z,1520526656.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:56.716Z,1520526656.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:56.731Z,1520526656.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:57.115Z,1520526657.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:57.130Z,1520526657.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:57.515Z,1520526657.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:57.531Z,1520526657.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:57.915Z,1520526657.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:57.931Z,1520526657.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:58.316Z,1520526658.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:58.331Z,1520526658.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:58.716Z,1520526658.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:58.731Z,1520526658.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:59.116Z,1520526659.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:59.131Z,1520526659.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:59.517Z,1520526659.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:59.532Z,1520526659.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:30:59.929Z,1520526659.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:30:59.961Z,1520526659.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:00.290Z,1520526660.290 [NAL9602](INFO): NAL9602 initialized
2018-03-08T16:31:00.318Z,1520526660.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:00.334Z,1520526660.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:00.718Z,1520526660.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:00.732Z,1520526660.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:01.129Z,1520526661.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:01.159Z,1520526661.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:01.529Z,1520526661.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:01.556Z,1520526661.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:01.928Z,1520526661.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:01.943Z,1520526661.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:02.321Z,1520526662.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:02.342Z,1520526662.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:02.720Z,1520526662.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:02.736Z,1520526662.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:03.124Z,1520526663.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:03.139Z,1520526663.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:03.525Z,1520526663.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:03.541Z,1520526663.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:03.929Z,1520526663.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:03.944Z,1520526663.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:04.329Z,1520526664.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:04.367Z,1520526664.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:04.709Z,1520526664.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:04.740Z,1520526664.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:05.123Z,1520526665.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:05.138Z,1520526665.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:05.525Z,1520526665.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:05.540Z,1520526665.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:05.916Z,1520526665.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:05.932Z,1520526665.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:06.325Z,1520526666.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:06.341Z,1520526666.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:06.724Z,1520526666.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:06.739Z,1520526666.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:07.124Z,1520526667.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:07.146Z,1520526667.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:07.516Z,1520526667.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:07.531Z,1520526667.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:07.923Z,1520526667.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:07.938Z,1520526667.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:08.323Z,1520526668.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:08.338Z,1520526668.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:08.720Z,1520526668.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:08.736Z,1520526668.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:09.124Z,1520526669.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:09.138Z,1520526669.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:09.525Z,1520526669.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:09.542Z,1520526669.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:09.929Z,1520526669.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:09.944Z,1520526669.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:10.326Z,1520526670.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:10.340Z,1520526670.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:10.712Z,1520526670.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:10.747Z,1520526670.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:11.123Z,1520526671.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:11.138Z,1520526671.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:11.523Z,1520526671.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:11.539Z,1520526671.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:11.912Z,1520526671.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:11.935Z,1520526671.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:12.325Z,1520526672.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:12.341Z,1520526672.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:12.729Z,1520526672.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:12.744Z,1520526672.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:13.121Z,1520526673.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:13.149Z,1520526673.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:13.519Z,1520526673.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:13.534Z,1520526673.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:13.920Z,1520526673.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:13.935Z,1520526673.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:14.324Z,1520526674.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:14.339Z,1520526674.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:14.723Z,1520526674.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:14.739Z,1520526674.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:15.120Z,1520526675.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:15.135Z,1520526675.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:15.528Z,1520526675.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:15.544Z,1520526675.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:15.929Z,1520526675.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:15.944Z,1520526675.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:16.328Z,1520526676.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:16.344Z,1520526676.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:16.704Z,1520526676.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:16.739Z,1520526676.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:17.120Z,1520526677.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:17.135Z,1520526677.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:17.519Z,1520526677.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:17.534Z,1520526677.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:17.908Z,1520526677.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:17.943Z,1520526677.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:18.332Z,1520526678.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:18.348Z,1520526678.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:18.732Z,1520526678.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:18.747Z,1520526678.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:19.120Z,1520526679.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:19.148Z,1520526679.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:19.511Z,1520526679.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:19.537Z,1520526679.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:19.911Z,1520526679.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:19.938Z,1520526679.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:20.323Z,1520526680.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:20.338Z,1520526680.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:20.711Z,1520526680.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:20.746Z,1520526680.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:21.123Z,1520526681.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:21.139Z,1520526681.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:21.533Z,1520526681.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:21.549Z,1520526681.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:21.934Z,1520526681.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:21.949Z,1520526681.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:22.334Z,1520526682.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:22.349Z,1520526682.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:22.704Z,1520526682.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:22.738Z,1520526682.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:23.111Z,1520526683.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:23.143Z,1520526683.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:23.524Z,1520526683.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:23.539Z,1520526683.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:23.908Z,1520526683.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:23.946Z,1520526683.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:24.329Z,1520526684.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:24.344Z,1520526684.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:24.736Z,1520526684.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:24.751Z,1520526684.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:25.121Z,1520526685.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:25.149Z,1520526685.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:25.529Z,1520526685.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:25.545Z,1520526685.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:25.920Z,1520526685.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:25.942Z,1520526685.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:26.323Z,1520526686.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:26.342Z,1520526686.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:26.725Z,1520526686.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:26.749Z,1520526686.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:27.111Z,1520526687.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:27.137Z,1520526687.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:27.526Z,1520526687.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:27.541Z,1520526687.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:27.932Z,1520526687.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:27.948Z,1520526687.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:28.333Z,1520526688.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:28.354Z,1520526688.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:28.705Z,1520526688.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:28.732Z,1520526688.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:29.111Z,1520526689.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:29.137Z,1520526689.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:29.512Z,1520526689.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:29.542Z,1520526689.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:29.904Z,1520526689.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:29.939Z,1520526689.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:30.333Z,1520526690.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:30.348Z,1520526690.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:30.734Z,1520526690.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:30.754Z,1520526690.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:31.121Z,1520526691.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:31.152Z,1520526691.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:31.511Z,1520526691.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:31.543Z,1520526691.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:31.911Z,1520526691.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:31.951Z,1520526691.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:32.323Z,1520526692.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:32.343Z,1520526692.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:32.712Z,1520526692.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:32.743Z,1520526692.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:33.111Z,1520526693.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:33.139Z,1520526693.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:33.537Z,1520526693.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:33.558Z,1520526693.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:33.933Z,1520526693.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:33.949Z,1520526693.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:34.337Z,1520526694.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:34.353Z,1520526694.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:34.705Z,1520526694.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:34.728Z,1520526694.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:35.115Z,1520526695.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:35.141Z,1520526695.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:35.512Z,1520526695.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:35.549Z,1520526695.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:35.911Z,1520526695.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:35.942Z,1520526695.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:36.329Z,1520526696.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:36.345Z,1520526696.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:36.734Z,1520526696.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:36.749Z,1520526696.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:37.117Z,1520526697.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:37.152Z,1520526697.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:37.515Z,1520526697.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:37.542Z,1520526697.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:37.911Z,1520526697.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:37.935Z,1520526697.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:38.315Z,1520526698.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:38.347Z,1520526698.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:38.712Z,1520526698.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:38.743Z,1520526698.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:39.115Z,1520526699.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:39.151Z,1520526699.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:39.525Z,1520526699.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:39.553Z,1520526699.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:39.938Z,1520526699.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:39.953Z,1520526699.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:40.325Z,1520526700.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:40.363Z,1520526700.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:40.719Z,1520526700.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:40.750Z,1520526700.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:41.112Z,1520526701.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:41.128Z,1520526701.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:41.517Z,1520526701.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:41.533Z,1520526701.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:41.915Z,1520526701.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:41.931Z,1520526701.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:42.338Z,1520526702.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:42.370Z,1520526702.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:42.737Z,1520526702.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:42.770Z,1520526702.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:43.129Z,1520526703.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:43.165Z,1520526703.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:43.516Z,1520526703.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:43.532Z,1520526703.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:43.918Z,1520526703.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:43.933Z,1520526703.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:44.317Z,1520526704.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:44.332Z,1520526704.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:44.715Z,1520526704.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:44.731Z,1520526704.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:45.122Z,1520526705.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:45.137Z,1520526705.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:45.533Z,1520526705.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:45.565Z,1520526705.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:45.568Z,1520526705.568 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T16:26:45.2Z
2018-03-08T16:31:45.568Z,1520526705.568 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T16:31:45.568Z,1520526705.568 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T16:31:45.930Z,1520526705.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:45.953Z,1520526705.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:46.425Z,1520526706.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:46.441Z,1520526706.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:46.719Z,1520526706.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:46.735Z,1520526706.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:49.889Z,1520526709.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:49.915Z,1520526709.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:50.014Z,1520526710.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:50.046Z,1520526710.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:50.345Z,1520526710.345 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0204.lzma
2018-03-08T16:31:50.389Z,1520526710.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:50.413Z,1520526710.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:50.773Z,1520526710.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:50.789Z,1520526710.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:51.147Z,1520526711.147 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0204.lzma.bak
2018-03-08T16:31:51.147Z,1520526711.147 [DataOverHttps](INFO): SBD MOMSN=7987292
2018-03-08T16:31:51.202Z,1520526711.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:51.222Z,1520526711.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:51.761Z,1520526711.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:51.776Z,1520526711.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:51.965Z,1520526711.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:52.005Z,1520526712.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:55.077Z,1520526715.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:55.093Z,1520526715.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:55.133Z,1520526715.133 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T16:31:55.190Z,1520526715.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:55.238Z,1520526715.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:55.590Z,1520526715.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:55.614Z,1520526715.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:55.985Z,1520526715.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:56.019Z,1520526716.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:56.390Z,1520526716.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:56.413Z,1520526716.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:56.771Z,1520526716.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:56.802Z,1520526716.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:31:57.173Z,1520526717.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:31:57.188Z,1520526717.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:00.275Z,1520526720.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:00.291Z,1520526720.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:00.389Z,1520526720.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:00.422Z,1520526720.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:00.749Z,1520526720.749 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180308T074127/Express0205.lzma
2018-03-08T16:32:00.796Z,1520526720.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:00.817Z,1520526720.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:01.186Z,1520526721.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:01.213Z,1520526721.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:05.279Z,1520526725.279 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0205.lzma.bak
2018-03-08T16:32:05.279Z,1520526725.279 [DataOverHttps](INFO): SBD MOMSN=7987294
2018-03-08T16:32:05.398Z,1520526725.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:05.424Z,1520526725.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:05.703Z,1520526725.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:05.746Z,1520526725.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:05.749Z,1520526725.749 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T16:32:05.749Z,1520526725.749 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T16:32:05.750Z,1520526725.750 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T16:32:05.875Z,1520526725.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:05.895Z,1520526725.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:09.042Z,1520526729.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:09.062Z,1520526729.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:09.165Z,1520526729.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:09.198Z,1520526729.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:09.552Z,1520526729.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:09.574Z,1520526729.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:09.950Z,1520526729.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:09.964Z,1520526729.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:10.353Z,1520526730.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:10.368Z,1520526730.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:10.727Z,1520526730.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:10.754Z,1520526730.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:11.127Z,1520526731.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:11.163Z,1520526731.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:11.528Z,1520526731.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:11.570Z,1520526731.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:11.931Z,1520526731.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:11.957Z,1520526731.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:12.344Z,1520526732.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:12.363Z,1520526732.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:12.753Z,1520526732.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:12.768Z,1520526732.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:13.146Z,1520526733.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:13.162Z,1520526733.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:13.523Z,1520526733.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:13.558Z,1520526733.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:13.931Z,1520526733.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:13.958Z,1520526733.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:14.327Z,1520526734.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:14.358Z,1520526734.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:14.731Z,1520526734.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:14.757Z,1520526734.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:15.131Z,1520526735.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:15.159Z,1520526735.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:15.545Z,1520526735.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:15.561Z,1520526735.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:15.954Z,1520526735.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:15.969Z,1520526735.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:16.353Z,1520526736.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:16.368Z,1520526736.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:16.727Z,1520526736.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:16.758Z,1520526736.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:17.123Z,1520526737.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:17.158Z,1520526737.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:17.527Z,1520526737.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:17.558Z,1520526737.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:17.927Z,1520526737.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:17.959Z,1520526737.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:18.353Z,1520526738.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:18.368Z,1520526738.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:18.753Z,1520526738.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:18.769Z,1520526738.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:19.141Z,1520526739.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:19.164Z,1520526739.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:19.523Z,1520526739.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:19.558Z,1520526739.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:19.931Z,1520526739.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:19.959Z,1520526739.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:20.327Z,1520526740.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:20.358Z,1520526740.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:20.731Z,1520526740.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:20.763Z,1520526740.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:21.127Z,1520526741.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:21.154Z,1520526741.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:21.554Z,1520526741.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:21.570Z,1520526741.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:21.941Z,1520526741.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:21.969Z,1520526741.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:22.353Z,1520526742.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:22.369Z,1520526742.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:22.728Z,1520526742.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:22.743Z,1520526742.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:23.135Z,1520526743.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:23.172Z,1520526743.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:23.530Z,1520526743.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:23.545Z,1520526743.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:23.928Z,1520526743.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:23.950Z,1520526743.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:24.345Z,1520526744.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:24.379Z,1520526744.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:24.742Z,1520526744.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:24.774Z,1520526744.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:25.145Z,1520526745.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:25.181Z,1520526745.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:25.533Z,1520526745.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:25.548Z,1520526745.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:25.932Z,1520526745.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:25.948Z,1520526745.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:26.333Z,1520526746.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:26.349Z,1520526746.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:26.738Z,1520526746.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:26.754Z,1520526746.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:27.127Z,1520526747.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:27.148Z,1520526747.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:27.550Z,1520526747.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:27.580Z,1520526747.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:27.945Z,1520526747.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:27.973Z,1520526747.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:28.349Z,1520526748.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:28.383Z,1520526748.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:28.734Z,1520526748.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:28.750Z,1520526748.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:29.131Z,1520526749.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:29.147Z,1520526749.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:29.530Z,1520526749.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:29.554Z,1520526749.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:29.939Z,1520526749.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:29.958Z,1520526749.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:30.345Z,1520526750.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:30.361Z,1520526750.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:30.741Z,1520526750.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:30.757Z,1520526750.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:31.145Z,1520526751.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:31.161Z,1520526751.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:31.539Z,1520526751.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:31.556Z,1520526751.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:31.928Z,1520526751.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:31.951Z,1520526751.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:32.339Z,1520526752.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:32.354Z,1520526752.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:32.723Z,1520526752.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:32.750Z,1520526752.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:33.120Z,1520526753.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:33.155Z,1520526753.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:33.542Z,1520526753.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:33.569Z,1520526753.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:33.952Z,1520526753.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:33.967Z,1520526753.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:34.342Z,1520526754.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:34.365Z,1520526754.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:34.731Z,1520526754.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:34.757Z,1520526754.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:35.123Z,1520526755.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:35.154Z,1520526755.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:35.532Z,1520526755.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:35.558Z,1520526755.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:35.927Z,1520526755.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:35.953Z,1520526755.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:36.350Z,1520526756.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:36.365Z,1520526756.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:36.745Z,1520526756.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:36.761Z,1520526756.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:37.149Z,1520526757.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:37.165Z,1520526757.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:37.527Z,1520526757.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:37.553Z,1520526757.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:37.924Z,1520526757.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:37.959Z,1520526757.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:38.327Z,1520526758.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:38.353Z,1520526758.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:38.723Z,1520526758.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:38.759Z,1520526758.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:39.124Z,1520526759.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:39.152Z,1520526759.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:39.541Z,1520526759.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:39.564Z,1520526759.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:39.943Z,1520526759.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:39.971Z,1520526759.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:40.342Z,1520526760.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:40.357Z,1520526760.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:40.727Z,1520526760.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:40.759Z,1520526760.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:41.123Z,1520526761.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:41.156Z,1520526761.156 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:41.156Z,1520526761.156 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 176
2018-03-08T16:32:41.156Z,1520526761.156 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T16:32:41.158Z,1520526761.158 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:41.158Z,1520526761.158 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 176
2018-03-08T16:32:41.158Z,1520526761.158 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T16:32:41.160Z,1520526761.160 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:41.160Z,1520526761.160 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 176
2018-03-08T16:32:41.160Z,1520526761.160 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T16:32:41.171Z,1520526761.171 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T16:32:41.171Z,1520526761.171 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T16:32:41.172Z,1520526761.172 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T16:32:41.528Z,1520526761.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:41.554Z,1520526761.554 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T16:32:41.554Z,1520526761.554 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 176
2018-03-08T16:32:41.554Z,1520526761.554 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T16:32:41.554Z,1520526761.554 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 176
2018-03-08T16:32:41.555Z,1520526761.555 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T16:32:41.555Z,1520526761.555 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 176
2018-03-08T16:32:41.931Z,1520526761.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:41.949Z,1520526761.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T16:32:41.950Z,1520526761.950 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:32:41.950Z,1520526761.950 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:32:41.951Z,1520526761.951 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T16:32:41.951Z,1520526761.951 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:32:41.951Z,1520526761.951 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:32:41.952Z,1520526761.952 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T16:32:41.952Z,1520526761.952 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:32:41.953Z,1520526761.953 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:32:42.341Z,1520526762.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:42.356Z,1520526762.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T16:32:42.357Z,1520526762.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:42.737Z,1520526762.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:42.752Z,1520526762.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T16:32:42.753Z,1520526762.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:43.141Z,1520526763.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:43.156Z,1520526763.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T16:32:43.157Z,1520526763.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:43.560Z,1520526763.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:43.575Z,1520526763.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T16:32:43.576Z,1520526763.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:43.921Z,1520526763.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:43.942Z,1520526763.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T16:32:43.943Z,1520526763.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:44.328Z,1520526764.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:44.343Z,1520526764.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T16:32:44.344Z,1520526764.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:44.731Z,1520526764.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:44.746Z,1520526764.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T16:32:44.747Z,1520526764.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:45.120Z,1520526765.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:45.142Z,1520526765.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T16:32:45.143Z,1520526765.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:45.538Z,1520526765.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:45.562Z,1520526765.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T16:32:45.563Z,1520526765.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:45.942Z,1520526765.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:45.993Z,1520526765.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T16:32:45.993Z,1520526765.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:46.342Z,1520526766.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:46.357Z,1520526766.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T16:32:46.358Z,1520526766.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:46.727Z,1520526766.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:46.765Z,1520526766.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T16:32:46.766Z,1520526766.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:47.140Z,1520526767.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:47.154Z,1520526767.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T16:32:47.155Z,1520526767.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:47.540Z,1520526767.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:47.555Z,1520526767.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T16:32:47.556Z,1520526767.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:47.926Z,1520526767.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:47.962Z,1520526767.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T16:32:47.963Z,1520526767.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:48.350Z,1520526768.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:48.365Z,1520526768.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T16:32:48.366Z,1520526768.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:48.746Z,1520526768.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:48.761Z,1520526768.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T16:32:48.762Z,1520526768.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:49.146Z,1520526769.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:49.160Z,1520526769.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T16:32:49.161Z,1520526769.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:49.523Z,1520526769.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:49.558Z,1520526769.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T16:32:49.559Z,1520526769.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:49.920Z,1520526769.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:49.947Z,1520526769.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T16:32:49.948Z,1520526769.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:50.331Z,1520526770.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:50.356Z,1520526770.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T16:32:50.357Z,1520526770.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:50.728Z,1520526770.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:50.758Z,1520526770.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T16:32:50.759Z,1520526770.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:51.126Z,1520526771.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:51.158Z,1520526771.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T16:32:51.159Z,1520526771.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:51.550Z,1520526771.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:51.565Z,1520526771.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T16:32:51.566Z,1520526771.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:51.950Z,1520526771.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:51.965Z,1520526771.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T16:32:51.966Z,1520526771.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:52.337Z,1520526772.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:52.370Z,1520526772.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T16:32:52.371Z,1520526772.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:52.728Z,1520526772.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:52.769Z,1520526772.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T16:32:52.770Z,1520526772.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:53.127Z,1520526773.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:53.170Z,1520526773.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T16:32:53.171Z,1520526773.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:53.531Z,1520526773.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:53.567Z,1520526773.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T16:32:53.568Z,1520526773.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:53.930Z,1520526773.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:53.966Z,1520526773.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T16:32:53.967Z,1520526773.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:54.345Z,1520526774.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:54.369Z,1520526774.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T16:32:54.370Z,1520526774.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:54.741Z,1520526774.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:54.768Z,1520526774.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T16:32:54.773Z,1520526774.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:55.145Z,1520526775.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:55.176Z,1520526775.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T16:32:55.178Z,1520526775.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:55.531Z,1520526775.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:55.546Z,1520526775.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T16:32:55.547Z,1520526775.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:55.927Z,1520526775.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:55.943Z,1520526775.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T16:32:55.944Z,1520526775.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:56.332Z,1520526776.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:56.347Z,1520526776.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T16:32:56.348Z,1520526776.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:56.735Z,1520526776.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:56.750Z,1520526776.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T16:32:56.751Z,1520526776.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:57.126Z,1520526777.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:57.154Z,1520526777.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T16:32:57.155Z,1520526777.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:57.549Z,1520526777.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:57.582Z,1520526777.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T16:32:57.583Z,1520526777.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:57.936Z,1520526777.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:57.951Z,1520526777.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T16:32:57.952Z,1520526777.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:58.349Z,1520526778.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:58.382Z,1520526778.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T16:32:58.383Z,1520526778.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:58.736Z,1520526778.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:58.751Z,1520526778.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T16:32:58.752Z,1520526778.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:59.135Z,1520526779.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:59.150Z,1520526779.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T16:32:59.150Z,1520526779.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:59.530Z,1520526779.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:59.551Z,1520526779.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T16:32:59.552Z,1520526779.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:32:59.935Z,1520526779.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:32:59.950Z,1520526779.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T16:32:59.951Z,1520526779.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:00.345Z,1520526780.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:00.360Z,1520526780.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T16:33:00.361Z,1520526780.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:00.740Z,1520526780.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:00.768Z,1520526780.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T16:33:00.769Z,1520526780.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:01.144Z,1520526781.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:01.160Z,1520526781.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:01.540Z,1520526781.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:01.556Z,1520526781.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:01.928Z,1520526781.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:01.959Z,1520526781.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:02.341Z,1520526782.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:02.356Z,1520526782.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:02.724Z,1520526782.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:02.758Z,1520526782.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:03.124Z,1520526783.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:03.159Z,1520526783.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:03.550Z,1520526783.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:03.566Z,1520526783.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:03.950Z,1520526783.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:03.965Z,1520526783.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:04.349Z,1520526784.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:04.371Z,1520526784.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:04.732Z,1520526784.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:04.759Z,1520526784.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:05.128Z,1520526785.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:05.165Z,1520526785.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:05.532Z,1520526785.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:05.561Z,1520526785.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:05.927Z,1520526785.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:05.955Z,1520526785.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:06.346Z,1520526786.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:06.365Z,1520526786.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:09.453Z,1520526789.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:09.469Z,1520526789.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:09.582Z,1520526789.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:09.626Z,1520526789.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:09.923Z,1520526789.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:09.961Z,1520526789.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:10.318Z,1520526790.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:10.334Z,1520526790.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:10.716Z,1520526790.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:10.731Z,1520526790.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:11.120Z,1520526791.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:11.135Z,1520526791.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:11.533Z,1520526791.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:11.558Z,1520526791.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:11.930Z,1520526791.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:11.965Z,1520526791.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:12.333Z,1520526792.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:12.357Z,1520526792.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:12.718Z,1520526792.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:12.733Z,1520526792.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:13.116Z,1520526793.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:13.139Z,1520526793.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:13.523Z,1520526793.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:13.539Z,1520526793.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:13.923Z,1520526793.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:13.939Z,1520526793.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:14.333Z,1520526794.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:14.363Z,1520526794.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:14.733Z,1520526794.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:14.763Z,1520526794.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:15.133Z,1520526795.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:15.160Z,1520526795.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:15.524Z,1520526795.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:15.540Z,1520526795.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:15.924Z,1520526795.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:15.939Z,1520526795.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:16.323Z,1520526796.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:16.338Z,1520526796.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:16.738Z,1520526796.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:16.831Z,1520526796.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:17.119Z,1520526797.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:17.135Z,1520526797.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:17.533Z,1520526797.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:17.564Z,1520526797.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:17.925Z,1520526797.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:17.941Z,1520526797.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:18.337Z,1520526798.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:18.360Z,1520526798.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:18.726Z,1520526798.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:18.742Z,1520526798.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:19.119Z,1520526799.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:19.135Z,1520526799.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:19.521Z,1520526799.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:19.536Z,1520526799.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:19.923Z,1520526799.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:19.938Z,1520526799.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:20.329Z,1520526800.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:20.345Z,1520526800.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:20.729Z,1520526800.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:20.750Z,1520526800.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:21.129Z,1520526801.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:21.150Z,1520526801.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:21.521Z,1520526801.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:21.537Z,1520526801.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:21.923Z,1520526801.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:21.938Z,1520526801.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:22.312Z,1520526802.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:22.327Z,1520526802.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:22.717Z,1520526802.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:22.750Z,1520526802.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:23.126Z,1520526803.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:23.146Z,1520526803.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:23.537Z,1520526803.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:23.553Z,1520526803.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:23.932Z,1520526803.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:23.948Z,1520526803.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:24.337Z,1520526804.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:24.358Z,1520526804.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:24.727Z,1520526804.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:24.743Z,1520526804.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:25.112Z,1520526805.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:25.142Z,1520526805.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:25.519Z,1520526805.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:25.542Z,1520526805.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:25.923Z,1520526805.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:25.938Z,1520526805.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:26.338Z,1520526806.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:26.358Z,1520526806.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:26.736Z,1520526806.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:26.758Z,1520526806.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:27.137Z,1520526807.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:27.158Z,1520526807.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:27.520Z,1520526807.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:27.543Z,1520526807.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:27.922Z,1520526807.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:27.937Z,1520526807.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:28.323Z,1520526808.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:28.339Z,1520526808.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:28.724Z,1520526808.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:28.740Z,1520526808.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:29.122Z,1520526809.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:29.137Z,1520526809.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:29.525Z,1520526809.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:29.540Z,1520526809.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:29.924Z,1520526809.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:29.939Z,1520526809.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:30.337Z,1520526810.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:30.371Z,1520526810.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:30.722Z,1520526810.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:30.737Z,1520526810.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:31.115Z,1520526811.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:31.142Z,1520526811.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:31.526Z,1520526811.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:31.546Z,1520526811.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:31.926Z,1520526811.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:31.942Z,1520526811.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:32.329Z,1520526812.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:32.345Z,1520526812.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:32.733Z,1520526812.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:32.749Z,1520526812.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:33.133Z,1520526813.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:33.148Z,1520526813.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:33.526Z,1520526813.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:33.541Z,1520526813.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:33.927Z,1520526813.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:33.946Z,1520526813.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:34.327Z,1520526814.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:34.342Z,1520526814.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:34.713Z,1520526814.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:34.737Z,1520526814.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:35.121Z,1520526815.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:35.142Z,1520526815.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:35.533Z,1520526815.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:35.548Z,1520526815.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:35.933Z,1520526815.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:35.948Z,1520526815.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:36.332Z,1520526816.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:36.347Z,1520526816.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:36.726Z,1520526816.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:36.741Z,1520526816.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:37.120Z,1520526817.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:37.135Z,1520526817.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:37.524Z,1520526817.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:37.546Z,1520526817.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:37.929Z,1520526817.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:37.944Z,1520526817.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:38.333Z,1520526818.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:38.349Z,1520526818.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:38.733Z,1520526818.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:38.748Z,1520526818.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:39.137Z,1520526819.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:39.152Z,1520526819.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:39.521Z,1520526819.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:39.549Z,1520526819.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:39.929Z,1520526819.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:39.945Z,1520526819.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:40.315Z,1520526820.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:40.342Z,1520526820.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:40.714Z,1520526820.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:40.751Z,1520526820.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:41.119Z,1520526821.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:41.150Z,1520526821.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:41.532Z,1520526821.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:41.564Z,1520526821.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:41.935Z,1520526821.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:41.951Z,1520526821.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:42.342Z,1520526822.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:42.357Z,1520526822.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:42.711Z,1520526822.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:42.748Z,1520526822.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:43.113Z,1520526823.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:43.151Z,1520526823.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:43.516Z,1520526823.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:43.555Z,1520526823.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:43.919Z,1520526823.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:43.946Z,1520526823.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:44.339Z,1520526824.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:44.355Z,1520526824.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:44.735Z,1520526824.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:44.758Z,1520526824.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:45.138Z,1520526825.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:45.153Z,1520526825.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:45.519Z,1520526825.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:45.550Z,1520526825.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:45.914Z,1520526825.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:45.951Z,1520526825.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:46.318Z,1520526826.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:46.352Z,1520526826.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:46.713Z,1520526826.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:46.728Z,1520526826.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:47.118Z,1520526827.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:47.155Z,1520526827.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:47.532Z,1520526827.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:47.560Z,1520526827.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:47.921Z,1520526827.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:47.957Z,1520526827.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:48.329Z,1520526828.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:48.363Z,1520526828.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:48.718Z,1520526828.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:48.733Z,1520526828.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:49.115Z,1520526829.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:49.131Z,1520526829.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:49.524Z,1520526829.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:49.540Z,1520526829.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:49.919Z,1520526829.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:49.934Z,1520526829.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:50.333Z,1520526830.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:50.369Z,1520526830.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:50.737Z,1520526830.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:50.768Z,1520526830.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:51.129Z,1520526831.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:51.167Z,1520526831.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:51.520Z,1520526831.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:51.536Z,1520526831.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:51.924Z,1520526831.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:51.938Z,1520526831.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:52.323Z,1520526832.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:52.338Z,1520526832.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:52.716Z,1520526832.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:52.735Z,1520526832.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:53.121Z,1520526833.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:53.137Z,1520526833.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:53.529Z,1520526833.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:53.545Z,1520526833.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:53.925Z,1520526833.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:53.941Z,1520526833.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:54.337Z,1520526834.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:54.368Z,1520526834.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:54.722Z,1520526834.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:54.737Z,1520526834.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:55.111Z,1520526835.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:55.139Z,1520526835.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:55.526Z,1520526835.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:55.542Z,1520526835.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:55.923Z,1520526835.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:55.938Z,1520526835.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:56.333Z,1520526836.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:56.351Z,1520526836.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:56.733Z,1520526836.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:56.748Z,1520526836.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:57.133Z,1520526837.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:57.148Z,1520526837.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:57.527Z,1520526837.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:57.542Z,1520526837.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:57.922Z,1520526837.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:57.938Z,1520526837.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:58.323Z,1520526838.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:58.339Z,1520526838.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:58.716Z,1520526838.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:58.743Z,1520526838.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:59.127Z,1520526839.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:59.142Z,1520526839.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:59.537Z,1520526839.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:59.553Z,1520526839.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:33:59.925Z,1520526839.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:33:59.956Z,1520526839.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:00.332Z,1520526840.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:00.348Z,1520526840.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:00.724Z,1520526840.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:00.739Z,1520526840.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:01.121Z,1520526841.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:01.140Z,1520526841.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:01.517Z,1520526841.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:01.551Z,1520526841.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:01.927Z,1520526841.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:01.942Z,1520526841.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:02.337Z,1520526842.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:02.352Z,1520526842.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:02.737Z,1520526842.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:02.752Z,1520526842.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:03.137Z,1520526843.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:03.159Z,1520526843.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:03.512Z,1520526843.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:03.541Z,1520526843.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:03.927Z,1520526843.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:03.946Z,1520526843.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:04.321Z,1520526844.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:04.342Z,1520526844.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:04.721Z,1520526844.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:04.742Z,1520526844.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:05.123Z,1520526845.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:05.139Z,1520526845.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:05.537Z,1520526845.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:05.559Z,1520526845.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:05.930Z,1520526845.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:05.958Z,1520526845.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:06.337Z,1520526846.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:06.352Z,1520526846.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:06.715Z,1520526846.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:06.743Z,1520526846.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:09.839Z,1520526849.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:09.855Z,1520526849.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:09.945Z,1520526849.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:09.989Z,1520526849.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:10.327Z,1520526850.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:10.343Z,1520526850.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:10.727Z,1520526850.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:10.742Z,1520526850.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:11.117Z,1520526851.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:11.143Z,1520526851.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:11.511Z,1520526851.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:11.540Z,1520526851.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:11.908Z,1520526851.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:11.941Z,1520526851.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:12.305Z,1520526852.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:12.320Z,1520526852.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:12.707Z,1520526852.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:12.743Z,1520526852.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:13.111Z,1520526853.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:13.125Z,1520526853.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:13.517Z,1520526853.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:13.549Z,1520526853.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:13.925Z,1520526853.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:13.949Z,1520526853.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:14.324Z,1520526854.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:14.353Z,1520526854.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:14.700Z,1520526854.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:14.715Z,1520526854.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:15.111Z,1520526855.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:15.130Z,1520526855.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:15.510Z,1520526855.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:15.525Z,1520526855.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:15.901Z,1520526855.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:15.929Z,1520526855.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:16.325Z,1520526856.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:16.356Z,1520526856.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:16.713Z,1520526856.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:16.728Z,1520526856.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:17.114Z,1520526857.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:17.129Z,1520526857.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:17.510Z,1520526857.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:17.527Z,1520526857.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:17.911Z,1520526857.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:17.927Z,1520526857.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:18.313Z,1520526858.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:18.329Z,1520526858.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:18.713Z,1520526858.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:18.729Z,1520526858.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:19.112Z,1520526859.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:19.126Z,1520526859.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:19.525Z,1520526859.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:19.557Z,1520526859.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:19.925Z,1520526859.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:19.957Z,1520526859.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:20.318Z,1520526860.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:20.332Z,1520526860.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:20.704Z,1520526860.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:20.732Z,1520526860.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:21.114Z,1520526861.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:21.130Z,1520526861.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:21.512Z,1520526861.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:21.527Z,1520526861.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:21.903Z,1520526861.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:21.937Z,1520526861.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:22.319Z,1520526862.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:22.334Z,1520526862.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:22.721Z,1520526862.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:22.736Z,1520526862.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:23.116Z,1520526863.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:23.132Z,1520526863.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:23.511Z,1520526863.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:23.531Z,1520526863.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:23.914Z,1520526863.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:23.929Z,1520526863.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:24.314Z,1520526864.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:24.329Z,1520526864.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:24.709Z,1520526864.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:24.729Z,1520526864.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:25.113Z,1520526865.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:25.127Z,1520526865.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:25.517Z,1520526865.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:25.533Z,1520526865.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:25.917Z,1520526865.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:25.932Z,1520526865.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:26.317Z,1520526866.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:26.338Z,1520526866.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:26.704Z,1520526866.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:26.720Z,1520526866.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:27.110Z,1520526867.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:27.134Z,1520526867.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:27.512Z,1520526867.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:27.527Z,1520526867.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:27.908Z,1520526867.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:27.923Z,1520526867.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:28.316Z,1520526868.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:28.331Z,1520526868.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:28.716Z,1520526868.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:28.731Z,1520526868.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:29.116Z,1520526869.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:29.135Z,1520526869.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:29.514Z,1520526869.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:29.529Z,1520526869.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:29.913Z,1520526869.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:29.928Z,1520526869.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:30.314Z,1520526870.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:30.329Z,1520526870.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:30.714Z,1520526870.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:30.730Z,1520526870.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:31.111Z,1520526871.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:31.134Z,1520526871.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:31.517Z,1520526871.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:31.533Z,1520526871.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:31.918Z,1520526871.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:31.933Z,1520526871.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:32.317Z,1520526872.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:32.332Z,1520526872.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:32.703Z,1520526872.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:32.731Z,1520526872.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:33.115Z,1520526873.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:33.135Z,1520526873.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:33.516Z,1520526873.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:33.531Z,1520526873.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:33.899Z,1520526873.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:33.934Z,1520526873.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:34.324Z,1520526874.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:34.340Z,1520526874.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:34.725Z,1520526874.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:34.740Z,1520526874.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:35.121Z,1520526875.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:35.136Z,1520526875.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:35.514Z,1520526875.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:35.530Z,1520526875.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:35.912Z,1520526875.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:35.927Z,1520526875.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:36.315Z,1520526876.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:36.334Z,1520526876.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:36.717Z,1520526876.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:36.732Z,1520526876.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:37.111Z,1520526877.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:37.130Z,1520526877.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:37.524Z,1520526877.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:37.540Z,1520526877.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:37.924Z,1520526877.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:37.939Z,1520526877.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:38.325Z,1520526878.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:38.346Z,1520526878.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:38.696Z,1520526878.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:38.731Z,1520526878.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:39.111Z,1520526879.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:39.130Z,1520526879.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:39.509Z,1520526879.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:39.537Z,1520526879.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:39.900Z,1520526879.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:39.930Z,1520526879.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:40.320Z,1520526880.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:40.336Z,1520526880.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:40.725Z,1520526880.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:40.746Z,1520526880.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:41.114Z,1520526881.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:41.141Z,1520526881.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:41.502Z,1520526881.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:41.535Z,1520526881.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:41.916Z,1520526881.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:41.938Z,1520526881.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:42.315Z,1520526882.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:42.330Z,1520526882.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:42.704Z,1520526882.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:42.739Z,1520526882.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:43.107Z,1520526883.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:43.134Z,1520526883.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:43.523Z,1520526883.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:43.538Z,1520526883.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:43.923Z,1520526883.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:43.943Z,1520526883.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:44.326Z,1520526884.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:44.341Z,1520526884.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:44.699Z,1520526884.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:44.734Z,1520526884.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:45.103Z,1520526885.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:45.135Z,1520526885.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:45.507Z,1520526885.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:45.544Z,1520526885.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:45.907Z,1520526885.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:45.938Z,1520526885.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:46.330Z,1520526886.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:46.345Z,1520526886.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:46.725Z,1520526886.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:46.744Z,1520526886.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:47.109Z,1520526887.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:47.135Z,1520526887.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:47.503Z,1520526887.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:47.538Z,1520526887.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:47.903Z,1520526887.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:47.931Z,1520526887.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:48.307Z,1520526888.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:48.339Z,1520526888.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:48.707Z,1520526888.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:48.723Z,1520526888.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:49.111Z,1520526889.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:49.146Z,1520526889.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:49.521Z,1520526889.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:49.553Z,1520526889.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:49.925Z,1520526889.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:49.949Z,1520526889.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:50.330Z,1520526890.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:50.356Z,1520526890.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:50.708Z,1520526890.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:50.723Z,1520526890.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:51.111Z,1520526891.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:51.130Z,1520526891.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:51.509Z,1520526891.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:51.524Z,1520526891.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:51.904Z,1520526891.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:51.927Z,1520526891.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:52.325Z,1520526892.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:52.349Z,1520526892.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:52.721Z,1520526892.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:52.748Z,1520526892.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:53.121Z,1520526893.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:53.157Z,1520526893.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:53.511Z,1520526893.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:53.534Z,1520526893.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:53.913Z,1520526893.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:53.929Z,1520526893.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:54.313Z,1520526894.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:54.328Z,1520526894.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:54.712Z,1520526894.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:54.735Z,1520526894.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:55.114Z,1520526895.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:55.129Z,1520526895.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:55.513Z,1520526895.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:55.528Z,1520526895.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:55.926Z,1520526895.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:55.960Z,1520526895.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:56.314Z,1520526896.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:56.329Z,1520526896.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:56.703Z,1520526896.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:56.730Z,1520526896.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:57.115Z,1520526897.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:57.132Z,1520526897.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:57.517Z,1520526897.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:57.533Z,1520526897.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:57.913Z,1520526897.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:57.929Z,1520526897.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:58.321Z,1520526898.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:58.337Z,1520526898.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:58.721Z,1520526898.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:58.736Z,1520526898.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:59.121Z,1520526899.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:59.136Z,1520526899.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:59.510Z,1520526899.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:59.529Z,1520526899.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:34:59.917Z,1520526899.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:34:59.931Z,1520526899.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:00.315Z,1520526900.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:00.338Z,1520526900.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:00.716Z,1520526900.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:00.732Z,1520526900.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:01.112Z,1520526901.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:01.127Z,1520526901.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:01.520Z,1520526901.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:01.542Z,1520526901.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:01.922Z,1520526901.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:01.966Z,1520526901.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:02.324Z,1520526902.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:02.339Z,1520526902.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:02.713Z,1520526902.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:02.773Z,1520526902.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:03.113Z,1520526903.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:03.136Z,1520526903.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:03.505Z,1520526903.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:03.555Z,1520526903.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:03.903Z,1520526903.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:03.943Z,1520526903.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:04.342Z,1520526904.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:04.358Z,1520526904.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:04.717Z,1520526904.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:04.744Z,1520526904.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:05.171Z,1520526905.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:05.191Z,1520526905.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:05.503Z,1520526905.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:05.539Z,1520526905.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:05.906Z,1520526905.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:05.921Z,1520526905.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:06.304Z,1520526906.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:06.319Z,1520526906.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:06.711Z,1520526906.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:06.727Z,1520526906.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:07.111Z,1520526907.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:07.125Z,1520526907.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:10.229Z,1520526910.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:10.254Z,1520526910.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:10.373Z,1520526910.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:10.414Z,1520526910.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:10.721Z,1520526910.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:10.753Z,1520526910.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:11.107Z,1520526911.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:11.122Z,1520526911.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:11.512Z,1520526911.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:11.527Z,1520526911.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:11.899Z,1520526911.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:11.934Z,1520526911.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:12.322Z,1520526912.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:12.337Z,1520526912.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:12.705Z,1520526912.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:12.731Z,1520526912.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:13.109Z,1520526913.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:13.142Z,1520526913.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:13.499Z,1520526913.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:13.534Z,1520526913.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:13.896Z,1520526913.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:13.911Z,1520526913.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:14.306Z,1520526914.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:14.340Z,1520526914.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:14.706Z,1520526914.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:14.741Z,1520526914.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:15.096Z,1520526915.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:15.123Z,1520526915.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:15.521Z,1520526915.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:15.544Z,1520526915.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:15.917Z,1520526915.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:15.944Z,1520526915.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:16.321Z,1520526916.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:16.344Z,1520526916.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:16.703Z,1520526916.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:16.731Z,1520526916.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:17.108Z,1520526917.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:17.123Z,1520526917.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:17.508Z,1520526917.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:17.523Z,1520526917.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:17.907Z,1520526917.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:17.923Z,1520526917.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:18.322Z,1520526918.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:18.358Z,1520526918.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:18.708Z,1520526918.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:18.723Z,1520526918.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:19.121Z,1520526919.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:19.152Z,1520526919.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:19.511Z,1520526919.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:19.527Z,1520526919.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:19.904Z,1520526919.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:19.919Z,1520526919.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:20.307Z,1520526920.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:20.322Z,1520526920.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:20.710Z,1520526920.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:20.729Z,1520526920.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:21.100Z,1520526921.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:21.123Z,1520526921.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:21.512Z,1520526921.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:21.527Z,1520526921.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:21.913Z,1520526921.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:21.928Z,1520526921.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:22.313Z,1520526922.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:22.329Z,1520526922.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:22.707Z,1520526922.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:22.722Z,1520526922.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:23.105Z,1520526923.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:23.127Z,1520526923.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:23.505Z,1520526923.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:23.529Z,1520526923.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:23.911Z,1520526923.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:23.926Z,1520526923.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:24.317Z,1520526924.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:24.333Z,1520526924.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:24.717Z,1520526924.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:24.733Z,1520526924.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:25.116Z,1520526925.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:25.131Z,1520526925.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:25.512Z,1520526925.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:25.527Z,1520526925.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:25.908Z,1520526925.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:25.923Z,1520526925.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:26.303Z,1520526926.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:26.330Z,1520526926.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:26.713Z,1520526926.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:26.734Z,1520526926.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:27.099Z,1520526927.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:27.130Z,1520526927.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:27.521Z,1520526927.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:27.536Z,1520526927.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:27.922Z,1520526927.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:27.938Z,1520526927.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:28.321Z,1520526928.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:28.336Z,1520526928.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:28.698Z,1520526928.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:28.735Z,1520526928.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:29.103Z,1520526929.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:29.130Z,1520526929.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:29.499Z,1520526929.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:29.526Z,1520526929.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:29.898Z,1520526929.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:29.926Z,1520526929.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:30.322Z,1520526930.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:30.343Z,1520526930.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:30.726Z,1520526930.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:30.741Z,1520526930.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:31.123Z,1520526931.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:31.138Z,1520526931.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:31.502Z,1520526931.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:31.534Z,1520526931.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:31.899Z,1520526931.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:31.926Z,1520526931.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:32.299Z,1520526932.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:32.327Z,1520526932.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:32.700Z,1520526932.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:32.739Z,1520526932.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:33.103Z,1520526933.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:33.130Z,1520526933.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:33.517Z,1520526933.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:33.549Z,1520526933.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:33.927Z,1520526933.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:33.943Z,1520526933.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:34.314Z,1520526934.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:34.341Z,1520526934.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:34.699Z,1520526934.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:34.714Z,1520526934.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:35.104Z,1520526935.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:35.119Z,1520526935.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:35.509Z,1520526935.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:35.524Z,1520526935.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:35.907Z,1520526935.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:35.926Z,1520526935.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:36.317Z,1520526936.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:36.341Z,1520526936.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:36.722Z,1520526936.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:36.756Z,1520526936.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:37.122Z,1520526937.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:37.157Z,1520526937.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:37.511Z,1520526937.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:37.527Z,1520526937.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:37.910Z,1520526937.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:37.926Z,1520526937.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:38.310Z,1520526938.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:38.326Z,1520526938.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:38.708Z,1520526938.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:38.723Z,1520526938.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:39.101Z,1520526939.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:39.125Z,1520526939.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:39.520Z,1520526939.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:39.536Z,1520526939.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:39.920Z,1520526939.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:39.935Z,1520526939.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:40.321Z,1520526940.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:40.336Z,1520526940.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:40.710Z,1520526940.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:40.730Z,1520526940.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:41.113Z,1520526941.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:41.127Z,1520526941.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:41.511Z,1520526941.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:41.527Z,1520526941.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:41.903Z,1520526941.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:41.925Z,1520526941.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:42.321Z,1520526942.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:42.336Z,1520526942.336 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:42.336Z,1520526942.336 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 177
2018-03-08T16:35:42.337Z,1520526942.337 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T16:35:42.338Z,1520526942.338 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:42.338Z,1520526942.338 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 177
2018-03-08T16:35:42.338Z,1520526942.338 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T16:35:42.340Z,1520526942.340 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:42.340Z,1520526942.340 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 177
2018-03-08T16:35:42.340Z,1520526942.340 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T16:35:42.378Z,1520526942.378 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T16:35:42.378Z,1520526942.378 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T16:35:42.379Z,1520526942.379 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T16:35:42.721Z,1520526942.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:42.747Z,1520526942.747 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T16:35:42.747Z,1520526942.747 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 177
2018-03-08T16:35:42.747Z,1520526942.747 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T16:35:42.747Z,1520526942.747 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 177
2018-03-08T16:35:42.748Z,1520526942.748 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T16:35:42.748Z,1520526942.748 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 177
2018-03-08T16:35:43.129Z,1520526943.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:43.143Z,1520526943.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T16:35:43.143Z,1520526943.143 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:35:43.144Z,1520526943.144 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:35:43.144Z,1520526943.144 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T16:35:43.145Z,1520526943.145 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:35:43.145Z,1520526943.145 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:35:43.145Z,1520526943.145 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T16:35:43.146Z,1520526943.146 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:35:43.146Z,1520526943.146 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:35:43.499Z,1520526943.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:43.530Z,1520526943.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T16:35:43.531Z,1520526943.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:43.903Z,1520526943.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:43.928Z,1520526943.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T16:35:43.929Z,1520526943.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:44.298Z,1520526944.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:44.330Z,1520526944.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T16:35:44.331Z,1520526944.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:44.694Z,1520526944.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:44.731Z,1520526944.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T16:35:44.732Z,1520526944.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:45.104Z,1520526945.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:45.131Z,1520526945.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T16:35:45.132Z,1520526945.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:45.517Z,1520526945.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:45.535Z,1520526945.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T16:35:45.536Z,1520526945.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:45.918Z,1520526945.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:45.933Z,1520526945.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T16:35:45.934Z,1520526945.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:46.321Z,1520526946.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:46.336Z,1520526946.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T16:35:46.337Z,1520526946.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:46.702Z,1520526946.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:46.728Z,1520526946.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T16:35:46.729Z,1520526946.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:47.099Z,1520526947.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:47.138Z,1520526947.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T16:35:47.139Z,1520526947.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:47.503Z,1520526947.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:47.530Z,1520526947.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T16:35:47.531Z,1520526947.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:47.907Z,1520526947.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:47.933Z,1520526947.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T16:35:47.934Z,1520526947.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:48.322Z,1520526948.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:48.336Z,1520526948.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T16:35:48.337Z,1520526948.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:48.720Z,1520526948.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:48.735Z,1520526948.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T16:35:48.736Z,1520526948.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:49.117Z,1520526949.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:49.132Z,1520526949.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T16:35:49.133Z,1520526949.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:49.499Z,1520526949.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:49.530Z,1520526949.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T16:35:49.531Z,1520526949.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:49.903Z,1520526949.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:49.930Z,1520526949.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T16:35:49.931Z,1520526949.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:50.298Z,1520526950.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:50.330Z,1520526950.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T16:35:50.331Z,1520526950.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:50.699Z,1520526950.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:50.730Z,1520526950.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T16:35:50.731Z,1520526950.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:51.099Z,1520526951.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:51.130Z,1520526951.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T16:35:51.131Z,1520526951.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:51.517Z,1520526951.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:51.532Z,1520526951.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T16:35:51.533Z,1520526951.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:51.923Z,1520526951.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:51.937Z,1520526951.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T16:35:51.938Z,1520526951.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:52.321Z,1520526952.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:52.336Z,1520526952.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T16:35:52.337Z,1520526952.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:52.699Z,1520526952.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:52.730Z,1520526952.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T16:35:52.731Z,1520526952.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:53.095Z,1520526953.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:53.130Z,1520526953.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T16:35:53.131Z,1520526953.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:53.503Z,1520526953.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:53.529Z,1520526953.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T16:35:53.530Z,1520526953.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:53.898Z,1520526953.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:53.930Z,1520526953.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T16:35:53.931Z,1520526953.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:54.318Z,1520526954.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:54.333Z,1520526954.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T16:35:54.334Z,1520526954.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:54.725Z,1520526954.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:54.740Z,1520526954.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T16:35:54.741Z,1520526954.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:55.117Z,1520526955.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:55.132Z,1520526955.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T16:35:55.133Z,1520526955.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:55.499Z,1520526955.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:55.530Z,1520526955.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T16:35:55.531Z,1520526955.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:55.903Z,1520526955.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:55.929Z,1520526955.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T16:35:55.930Z,1520526955.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:56.298Z,1520526956.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:56.330Z,1520526956.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T16:35:56.331Z,1520526956.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:56.699Z,1520526956.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:56.735Z,1520526956.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T16:35:56.736Z,1520526956.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:57.103Z,1520526957.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:57.129Z,1520526957.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T16:35:57.130Z,1520526957.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:57.526Z,1520526957.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:57.541Z,1520526957.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T16:35:57.542Z,1520526957.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:57.926Z,1520526957.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:57.940Z,1520526957.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T16:35:57.941Z,1520526957.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:58.321Z,1520526958.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:58.336Z,1520526958.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T16:35:58.337Z,1520526958.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:58.699Z,1520526958.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:58.734Z,1520526958.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T16:35:58.735Z,1520526958.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:59.103Z,1520526959.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:59.134Z,1520526959.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T16:35:59.135Z,1520526959.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:59.504Z,1520526959.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:59.533Z,1520526959.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T16:35:59.534Z,1520526959.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:35:59.899Z,1520526959.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:35:59.934Z,1520526959.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T16:35:59.935Z,1520526959.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:00.323Z,1520526960.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:00.337Z,1520526960.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T16:36:00.338Z,1520526960.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:00.725Z,1520526960.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:00.740Z,1520526960.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T16:36:00.741Z,1520526960.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:01.109Z,1520526961.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:01.135Z,1520526961.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T16:36:01.136Z,1520526961.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:01.499Z,1520526961.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:01.533Z,1520526961.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T16:36:01.534Z,1520526961.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:01.899Z,1520526961.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:01.934Z,1520526961.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T16:36:01.935Z,1520526961.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:02.301Z,1520526962.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:02.316Z,1520526962.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T16:36:02.317Z,1520526962.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:02.704Z,1520526962.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:02.719Z,1520526962.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:03.107Z,1520526963.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:03.143Z,1520526963.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:03.517Z,1520526963.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:03.551Z,1520526963.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:03.917Z,1520526963.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:03.950Z,1520526963.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:04.314Z,1520526964.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:04.349Z,1520526964.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:04.703Z,1520526964.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:04.719Z,1520526964.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:05.103Z,1520526965.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:05.118Z,1520526965.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:05.507Z,1520526965.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:05.523Z,1520526965.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:05.903Z,1520526965.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:05.931Z,1520526965.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:06.321Z,1520526966.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:06.358Z,1520526966.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:06.721Z,1520526966.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:06.736Z,1520526966.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:07.113Z,1520526967.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:07.129Z,1520526967.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:07.511Z,1520526967.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:07.526Z,1520526967.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:10.610Z,1520526970.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:10.630Z,1520526970.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:10.728Z,1520526970.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:10.767Z,1520526970.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:11.119Z,1520526971.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:11.134Z,1520526971.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:11.517Z,1520526971.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:11.533Z,1520526971.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:11.918Z,1520526971.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:11.939Z,1520526971.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:12.312Z,1520526972.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:12.327Z,1520526972.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:12.707Z,1520526972.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:12.723Z,1520526972.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:13.108Z,1520526973.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:13.123Z,1520526973.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:13.516Z,1520526973.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:13.532Z,1520526973.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:13.917Z,1520526973.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:13.933Z,1520526973.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:14.316Z,1520526974.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:14.332Z,1520526974.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:14.706Z,1520526974.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:14.722Z,1520526974.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:15.106Z,1520526975.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:15.122Z,1520526975.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:15.507Z,1520526975.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:15.523Z,1520526975.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:15.906Z,1520526975.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:15.932Z,1520526975.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:16.317Z,1520526976.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:16.333Z,1520526976.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:16.717Z,1520526976.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:16.732Z,1520526976.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:17.116Z,1520526977.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:17.131Z,1520526977.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:17.512Z,1520526977.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:17.527Z,1520526977.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:17.907Z,1520526977.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:17.923Z,1520526977.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:18.306Z,1520526978.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:18.334Z,1520526978.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:18.706Z,1520526978.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:18.722Z,1520526978.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:19.107Z,1520526979.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:19.122Z,1520526979.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:19.514Z,1520526979.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:19.529Z,1520526979.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:19.916Z,1520526979.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:19.932Z,1520526979.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:20.316Z,1520526980.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:20.331Z,1520526980.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:20.711Z,1520526980.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:20.726Z,1520526980.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:21.107Z,1520526981.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:21.123Z,1520526981.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:21.507Z,1520526981.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:21.522Z,1520526981.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:21.905Z,1520526981.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:21.926Z,1520526981.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:22.317Z,1520526982.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:22.332Z,1520526982.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:22.716Z,1520526982.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:22.732Z,1520526982.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:23.116Z,1520526983.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:23.131Z,1520526983.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:23.513Z,1520526983.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:23.528Z,1520526983.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:23.907Z,1520526983.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:23.922Z,1520526983.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:24.309Z,1520526984.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:24.324Z,1520526984.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:24.712Z,1520526984.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:24.728Z,1520526984.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:25.111Z,1520526985.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:25.127Z,1520526985.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:25.516Z,1520526985.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:25.531Z,1520526985.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:25.917Z,1520526985.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:25.932Z,1520526985.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:26.316Z,1520526986.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:26.331Z,1520526986.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:26.706Z,1520526986.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:26.721Z,1520526986.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:27.105Z,1520526987.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:27.120Z,1520526987.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:27.503Z,1520526987.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:27.530Z,1520526987.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:27.910Z,1520526987.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:27.925Z,1520526987.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:28.321Z,1520526988.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:28.337Z,1520526988.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:28.720Z,1520526988.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:28.735Z,1520526988.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:29.120Z,1520526989.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:29.135Z,1520526989.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:29.512Z,1520526989.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:29.527Z,1520526989.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:29.907Z,1520526989.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:29.926Z,1520526989.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:30.307Z,1520526990.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:30.322Z,1520526990.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:30.697Z,1520526990.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:30.727Z,1520526990.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:31.111Z,1520526991.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:31.126Z,1520526991.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:31.517Z,1520526991.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:31.538Z,1520526991.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:31.911Z,1520526991.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:31.932Z,1520526991.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:32.321Z,1520526992.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:32.336Z,1520526992.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:32.710Z,1520526992.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:32.725Z,1520526992.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:33.093Z,1520526993.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:33.121Z,1520526993.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:33.503Z,1520526993.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:33.526Z,1520526993.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:33.905Z,1520526993.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:33.930Z,1520526993.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:34.321Z,1520526994.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:34.343Z,1520526994.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:34.720Z,1520526994.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:34.743Z,1520526994.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:35.120Z,1520526995.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:35.135Z,1520526995.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:35.512Z,1520526995.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:35.527Z,1520526995.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:35.907Z,1520526995.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:35.923Z,1520526995.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:36.305Z,1520526996.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:36.330Z,1520526996.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:36.712Z,1520526996.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:36.728Z,1520526996.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:37.107Z,1520526997.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:37.123Z,1520526997.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:37.517Z,1520526997.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:37.532Z,1520526997.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:37.918Z,1520526997.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:37.933Z,1520526997.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:38.320Z,1520526998.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:38.335Z,1520526998.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:38.705Z,1520526998.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:38.728Z,1520526998.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:39.096Z,1520526999.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:39.126Z,1520526999.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:39.507Z,1520526999.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:39.526Z,1520526999.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:39.907Z,1520526999.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:39.930Z,1520526999.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:40.321Z,1520527000.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:40.342Z,1520527000.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:40.720Z,1520527000.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:40.735Z,1520527000.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:41.120Z,1520527001.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:41.135Z,1520527001.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:41.511Z,1520527001.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:41.527Z,1520527001.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:41.907Z,1520527001.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:41.930Z,1520527001.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:42.305Z,1520527002.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:42.328Z,1520527002.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:42.713Z,1520527002.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:42.728Z,1520527002.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:43.107Z,1520527003.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:43.126Z,1520527003.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:43.517Z,1520527003.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:43.532Z,1520527003.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:43.917Z,1520527003.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:43.933Z,1520527003.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:44.320Z,1520527004.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:44.335Z,1520527004.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:44.708Z,1520527004.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:44.723Z,1520527004.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:45.097Z,1520527005.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:45.127Z,1520527005.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:45.508Z,1520527005.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:45.523Z,1520527005.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:45.907Z,1520527005.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:45.926Z,1520527005.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:46.321Z,1520527006.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:46.337Z,1520527006.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:46.721Z,1520527006.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:46.742Z,1520527006.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:47.118Z,1520527007.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:47.133Z,1520527007.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:47.513Z,1520527007.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:47.529Z,1520527007.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:47.907Z,1520527007.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:47.930Z,1520527007.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:48.311Z,1520527008.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:48.326Z,1520527008.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:48.714Z,1520527008.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:48.729Z,1520527008.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:49.111Z,1520527009.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:49.134Z,1520527009.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:49.521Z,1520527009.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:49.536Z,1520527009.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:49.922Z,1520527009.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:49.938Z,1520527009.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:50.321Z,1520527010.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:50.337Z,1520527010.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:50.712Z,1520527010.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:50.727Z,1520527010.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:51.105Z,1520527011.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:51.133Z,1520527011.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:51.515Z,1520527011.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:51.530Z,1520527011.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:51.911Z,1520527011.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:51.926Z,1520527011.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:52.324Z,1520527012.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:52.339Z,1520527012.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:52.725Z,1520527012.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:52.746Z,1520527012.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:53.121Z,1520527013.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:53.142Z,1520527013.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:53.511Z,1520527013.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:53.529Z,1520527013.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:53.899Z,1520527013.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:53.936Z,1520527013.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:54.299Z,1520527014.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:54.326Z,1520527014.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:54.697Z,1520527014.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:54.724Z,1520527014.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:55.099Z,1520527015.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:55.135Z,1520527015.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:55.521Z,1520527015.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:55.536Z,1520527015.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:55.919Z,1520527015.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:55.934Z,1520527015.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:56.313Z,1520527016.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:56.337Z,1520527016.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:56.698Z,1520527016.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:56.730Z,1520527016.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:57.092Z,1520527017.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:57.108Z,1520527017.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:57.498Z,1520527017.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:57.534Z,1520527017.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:57.902Z,1520527017.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:57.934Z,1520527017.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:58.324Z,1520527018.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:58.339Z,1520527018.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:58.721Z,1520527018.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:58.739Z,1520527018.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:59.124Z,1520527019.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:59.146Z,1520527019.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:59.503Z,1520527019.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:59.539Z,1520527019.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:36:59.899Z,1520527019.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:36:59.934Z,1520527019.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:00.298Z,1520527020.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:00.334Z,1520527020.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:00.697Z,1520527020.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:00.712Z,1520527020.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:01.099Z,1520527021.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:01.115Z,1520527021.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:01.513Z,1520527021.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:01.540Z,1520527021.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:01.905Z,1520527021.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:01.920Z,1520527021.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:02.313Z,1520527022.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:02.344Z,1520527022.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:02.707Z,1520527022.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:02.722Z,1520527022.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:03.101Z,1520527023.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:03.117Z,1520527023.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:03.508Z,1520527023.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:03.523Z,1520527023.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:03.903Z,1520527023.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:03.918Z,1520527023.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:04.321Z,1520527024.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:04.345Z,1520527024.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:04.717Z,1520527024.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:04.740Z,1520527024.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:05.121Z,1520527025.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:05.151Z,1520527025.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:05.507Z,1520527025.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:05.523Z,1520527025.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:05.909Z,1520527025.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:05.924Z,1520527025.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:05.927Z,1520527025.927 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T16:37:05.927Z,1520527025.927 [Default:CheckIn:C.Wait] Stopped
2018-03-08T16:37:05.927Z,1520527025.927 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T16:37:05.927Z,1520527025.927 [Default:CheckIn:D] Running Loop=1
2018-03-08T16:37:06.305Z,1520527026.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:06.326Z,1520527026.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:06.329Z,1520527026.329 [Default:CheckIn:D] Stopped
2018-03-08T16:37:06.329Z,1520527026.329 [Default:CheckIn:E] Running Loop=1
2018-03-08T16:37:06.709Z,1520527026.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:06.724Z,1520527026.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:06.727Z,1520527026.727 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 531.358724 min 
2018-03-08T16:37:06.728Z,1520527026.728 [Default:CheckIn:E] Stopped
2018-03-08T16:37:06.728Z,1520527026.728 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T16:37:06.728Z,1520527026.728 [Default:CheckIn] Stopped
2018-03-08T16:37:06.728Z,1520527026.728 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T16:37:06.728Z,1520527026.728 [Default:CheckIn](INFO): Running loop #52
2018-03-08T16:37:06.728Z,1520527026.728 [Default:CheckIn] Running Loop=52
2018-03-08T16:37:06.728Z,1520527026.728 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T16:37:06.729Z,1520527026.729 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T16:37:07.101Z,1520527027.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:07.131Z,1520527027.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:07.511Z,1520527027.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:07.527Z,1520527027.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:07.913Z,1520527027.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:07.928Z,1520527027.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:11.017Z,1520527031.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:11.033Z,1520527031.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:11.132Z,1520527031.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:11.167Z,1520527031.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:11.516Z,1520527031.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:11.531Z,1520527031.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:11.915Z,1520527031.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:11.935Z,1520527031.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:12.320Z,1520527032.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:12.342Z,1520527032.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:12.721Z,1520527032.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:12.774Z,1520527032.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:13.117Z,1520527033.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:13.132Z,1520527033.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:13.508Z,1520527033.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:13.523Z,1520527033.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:13.910Z,1520527033.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:13.934Z,1520527033.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:14.300Z,1520527034.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:14.336Z,1520527034.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:14.707Z,1520527034.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:14.739Z,1520527034.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:15.127Z,1520527035.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:15.175Z,1520527035.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:15.522Z,1520527035.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:15.537Z,1520527035.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:15.919Z,1520527035.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:15.939Z,1520527035.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:16.322Z,1520527036.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:16.342Z,1520527036.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:16.696Z,1520527036.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:16.723Z,1520527036.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:17.099Z,1520527037.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:17.134Z,1520527037.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:17.500Z,1520527037.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:17.528Z,1520527037.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:17.899Z,1520527037.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:17.915Z,1520527037.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:18.317Z,1520527038.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:18.340Z,1520527038.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:18.729Z,1520527038.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:18.744Z,1520527038.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:19.105Z,1520527039.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:19.133Z,1520527039.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:19.507Z,1520527039.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:19.544Z,1520527039.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:19.904Z,1520527039.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:19.919Z,1520527039.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:20.302Z,1520527040.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:20.322Z,1520527040.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:20.706Z,1520527040.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:20.726Z,1520527040.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:21.104Z,1520527041.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:21.119Z,1520527041.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:21.521Z,1520527041.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:21.552Z,1520527041.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:21.917Z,1520527041.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:21.932Z,1520527041.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:22.321Z,1520527042.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:22.353Z,1520527042.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:22.704Z,1520527042.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:22.719Z,1520527042.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:23.107Z,1520527043.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:23.123Z,1520527043.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:23.507Z,1520527043.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:23.526Z,1520527043.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:23.907Z,1520527043.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:23.926Z,1520527043.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:24.314Z,1520527044.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:24.330Z,1520527044.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:24.713Z,1520527044.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:24.729Z,1520527044.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:25.114Z,1520527045.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:25.135Z,1520527045.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:25.508Z,1520527045.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:25.523Z,1520527045.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:25.905Z,1520527045.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:25.926Z,1520527045.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:26.308Z,1520527046.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:26.323Z,1520527046.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:26.712Z,1520527046.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:26.727Z,1520527046.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:27.108Z,1520527047.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:27.132Z,1520527047.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:27.514Z,1520527047.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:27.529Z,1520527047.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:27.917Z,1520527047.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:27.932Z,1520527047.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:28.315Z,1520527048.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:28.330Z,1520527048.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:28.713Z,1520527048.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:28.728Z,1520527048.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:29.109Z,1520527049.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:29.124Z,1520527049.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:29.507Z,1520527049.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:29.527Z,1520527049.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:29.912Z,1520527049.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:29.928Z,1520527049.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:30.317Z,1520527050.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:30.333Z,1520527050.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:30.722Z,1520527050.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:30.737Z,1520527050.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:31.117Z,1520527051.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:31.138Z,1520527051.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:31.509Z,1520527051.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:31.526Z,1520527051.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:31.909Z,1520527051.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:31.925Z,1520527051.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:32.307Z,1520527052.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:32.326Z,1520527052.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:32.707Z,1520527052.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:32.726Z,1520527052.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:33.105Z,1520527053.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:33.126Z,1520527053.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:33.520Z,1520527053.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:33.536Z,1520527053.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:33.920Z,1520527053.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:33.936Z,1520527053.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:34.321Z,1520527054.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:34.343Z,1520527054.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:34.711Z,1520527054.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:34.730Z,1520527054.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:35.105Z,1520527055.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:35.125Z,1520527055.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:35.508Z,1520527055.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:35.531Z,1520527055.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:35.911Z,1520527055.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:35.927Z,1520527055.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:36.317Z,1520527056.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:36.338Z,1520527056.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:36.725Z,1520527056.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:36.741Z,1520527056.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:37.121Z,1520527057.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:37.136Z,1520527057.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:37.498Z,1520527057.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:37.530Z,1520527057.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:37.899Z,1520527057.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:37.926Z,1520527057.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:38.299Z,1520527058.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:38.330Z,1520527058.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:38.699Z,1520527058.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:38.727Z,1520527058.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:39.099Z,1520527059.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:39.126Z,1520527059.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:39.518Z,1520527059.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:39.533Z,1520527059.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:39.921Z,1520527059.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:39.936Z,1520527059.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:40.322Z,1520527060.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:40.337Z,1520527060.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:40.699Z,1520527060.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:40.726Z,1520527060.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:41.099Z,1520527061.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:41.133Z,1520527061.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:41.500Z,1520527061.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:41.539Z,1520527061.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:41.903Z,1520527061.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:41.929Z,1520527061.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:42.309Z,1520527062.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:42.341Z,1520527062.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:42.715Z,1520527062.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:42.755Z,1520527062.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:43.111Z,1520527063.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:43.147Z,1520527063.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:43.501Z,1520527063.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:43.520Z,1520527063.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:43.909Z,1520527063.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:43.924Z,1520527063.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:44.308Z,1520527064.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:44.336Z,1520527064.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:44.709Z,1520527064.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:44.741Z,1520527064.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:45.110Z,1520527065.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:45.129Z,1520527065.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:45.521Z,1520527065.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:45.540Z,1520527065.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:45.923Z,1520527065.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:45.951Z,1520527065.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:46.325Z,1520527066.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:46.340Z,1520527066.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:46.703Z,1520527066.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:46.742Z,1520527066.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:47.100Z,1520527067.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:47.115Z,1520527067.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:47.511Z,1520527067.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:47.551Z,1520527067.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:47.905Z,1520527067.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:47.953Z,1520527067.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:48.312Z,1520527068.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:48.327Z,1520527068.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:48.721Z,1520527068.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:48.752Z,1520527068.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:49.113Z,1520527069.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:49.129Z,1520527069.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:49.507Z,1520527069.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:49.523Z,1520527069.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:49.907Z,1520527069.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:49.926Z,1520527069.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:50.303Z,1520527070.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:50.320Z,1520527070.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:50.708Z,1520527070.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:50.723Z,1520527070.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:51.107Z,1520527071.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:51.123Z,1520527071.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:51.517Z,1520527071.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:51.553Z,1520527071.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:51.921Z,1520527071.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:51.936Z,1520527071.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:52.313Z,1520527072.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:52.329Z,1520527072.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:52.707Z,1520527072.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:52.722Z,1520527072.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:53.111Z,1520527073.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:53.136Z,1520527073.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:53.534Z,1520527073.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:53.563Z,1520527073.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:53.907Z,1520527073.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:53.922Z,1520527073.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:54.313Z,1520527074.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:54.329Z,1520527074.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:54.717Z,1520527074.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:54.732Z,1520527074.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:55.114Z,1520527075.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:55.129Z,1520527075.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:55.509Z,1520527075.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:55.525Z,1520527075.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:55.905Z,1520527075.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:55.933Z,1520527075.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:56.311Z,1520527076.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:56.326Z,1520527076.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:56.707Z,1520527076.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:56.722Z,1520527076.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:57.111Z,1520527077.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:57.127Z,1520527077.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:57.516Z,1520527077.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:57.538Z,1520527077.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:57.917Z,1520527077.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:57.932Z,1520527077.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:58.317Z,1520527078.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:58.332Z,1520527078.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:58.711Z,1520527078.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:58.726Z,1520527078.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:59.106Z,1520527079.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:59.122Z,1520527079.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:59.505Z,1520527079.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:59.533Z,1520527079.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:37:59.912Z,1520527079.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:37:59.934Z,1520527079.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:00.317Z,1520527080.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:00.333Z,1520527080.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:00.720Z,1520527080.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:00.740Z,1520527080.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:01.121Z,1520527081.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:01.137Z,1520527081.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:01.502Z,1520527081.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:01.529Z,1520527081.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:01.899Z,1520527081.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:01.934Z,1520527081.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:02.303Z,1520527082.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:02.329Z,1520527082.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:02.699Z,1520527082.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:02.731Z,1520527082.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:03.103Z,1520527083.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:03.135Z,1520527083.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:03.505Z,1520527083.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:03.531Z,1520527083.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:03.922Z,1520527083.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:03.938Z,1520527083.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:04.321Z,1520527084.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:04.340Z,1520527084.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:04.700Z,1520527084.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:04.731Z,1520527084.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:05.102Z,1520527085.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:05.134Z,1520527085.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:05.507Z,1520527085.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:05.539Z,1520527085.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:05.903Z,1520527085.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:05.919Z,1520527085.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:06.321Z,1520527086.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:06.347Z,1520527086.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:06.717Z,1520527086.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:06.752Z,1520527086.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:07.121Z,1520527087.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:07.152Z,1520527087.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:07.507Z,1520527087.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:07.522Z,1520527087.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:07.904Z,1520527087.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:07.932Z,1520527087.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:08.308Z,1520527088.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:08.324Z,1520527088.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:11.416Z,1520527091.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:11.432Z,1520527091.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:11.537Z,1520527091.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:11.582Z,1520527091.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:11.929Z,1520527091.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:11.960Z,1520527091.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:12.317Z,1520527092.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:12.332Z,1520527092.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:12.729Z,1520527092.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:12.765Z,1520527092.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:13.110Z,1520527093.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:13.125Z,1520527093.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:13.517Z,1520527093.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:13.533Z,1520527093.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:13.915Z,1520527093.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:13.930Z,1520527093.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:14.320Z,1520527094.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:14.342Z,1520527094.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:14.717Z,1520527094.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:14.733Z,1520527094.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:15.121Z,1520527095.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:15.136Z,1520527095.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:15.514Z,1520527095.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:15.530Z,1520527095.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:15.909Z,1520527095.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:15.924Z,1520527095.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:16.312Z,1520527096.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:16.327Z,1520527096.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:16.711Z,1520527096.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:16.734Z,1520527096.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:17.109Z,1520527097.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:17.124Z,1520527097.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:17.520Z,1520527097.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:17.535Z,1520527097.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:17.921Z,1520527097.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:17.936Z,1520527097.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:18.321Z,1520527098.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:18.337Z,1520527098.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:18.715Z,1520527098.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:18.730Z,1520527098.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:19.120Z,1520527099.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:19.135Z,1520527099.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:19.516Z,1520527099.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:19.531Z,1520527099.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:19.909Z,1520527099.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:19.929Z,1520527099.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:20.319Z,1520527100.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:20.335Z,1520527100.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:20.721Z,1520527100.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:20.736Z,1520527100.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:21.120Z,1520527101.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:21.136Z,1520527101.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:21.514Z,1520527101.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:21.530Z,1520527101.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:21.909Z,1520527101.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:21.924Z,1520527101.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:22.307Z,1520527102.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:22.334Z,1520527102.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:22.709Z,1520527102.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:22.724Z,1520527102.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:23.097Z,1520527103.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:23.129Z,1520527103.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:23.525Z,1520527103.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:23.540Z,1520527103.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:23.927Z,1520527103.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:23.946Z,1520527103.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:24.321Z,1520527104.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:24.337Z,1520527104.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:24.703Z,1520527104.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:24.741Z,1520527104.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:25.115Z,1520527105.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:25.131Z,1520527105.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:25.516Z,1520527105.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:25.531Z,1520527105.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:25.903Z,1520527105.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:25.930Z,1520527105.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:26.321Z,1520527106.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:26.336Z,1520527106.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:26.718Z,1520527106.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:26.733Z,1520527106.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:27.115Z,1520527107.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:27.147Z,1520527107.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:27.515Z,1520527107.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:27.534Z,1520527107.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:27.913Z,1520527107.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:27.928Z,1520527107.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:28.307Z,1520527108.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:28.329Z,1520527108.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:28.705Z,1520527108.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:28.736Z,1520527108.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:29.100Z,1520527109.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:29.132Z,1520527109.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:29.541Z,1520527109.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:29.572Z,1520527109.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:29.925Z,1520527109.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:29.946Z,1520527109.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:30.322Z,1520527110.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:30.337Z,1520527110.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:30.703Z,1520527110.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:30.738Z,1520527110.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:31.100Z,1520527111.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:31.126Z,1520527111.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:31.516Z,1520527111.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:31.531Z,1520527111.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:31.903Z,1520527111.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:31.923Z,1520527111.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:32.335Z,1520527112.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:32.350Z,1520527112.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:32.717Z,1520527112.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:32.749Z,1520527112.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:33.121Z,1520527113.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:33.143Z,1520527113.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:33.508Z,1520527113.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:33.523Z,1520527113.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:33.900Z,1520527113.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:33.916Z,1520527113.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:34.307Z,1520527114.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:34.349Z,1520527114.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:34.708Z,1520527114.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:34.723Z,1520527114.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:35.103Z,1520527115.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:35.119Z,1520527115.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:35.517Z,1520527115.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:35.549Z,1520527115.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:35.925Z,1520527115.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:35.954Z,1520527115.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:36.320Z,1520527116.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:36.347Z,1520527116.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:36.708Z,1520527116.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:36.724Z,1520527116.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:37.107Z,1520527117.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:37.123Z,1520527117.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:37.511Z,1520527117.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:37.527Z,1520527117.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:37.910Z,1520527117.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:37.930Z,1520527117.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:38.325Z,1520527118.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:38.355Z,1520527118.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:38.725Z,1520527118.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:38.756Z,1520527118.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:39.125Z,1520527119.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:39.140Z,1520527119.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:39.512Z,1520527119.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:39.527Z,1520527119.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:39.911Z,1520527119.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:39.927Z,1520527119.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:40.311Z,1520527120.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:40.326Z,1520527120.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:40.714Z,1520527120.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:40.731Z,1520527120.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:41.114Z,1520527121.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:41.130Z,1520527121.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:41.521Z,1520527121.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:41.537Z,1520527121.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:41.924Z,1520527121.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:41.939Z,1520527121.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:42.325Z,1520527122.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:42.341Z,1520527122.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:42.716Z,1520527122.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:42.731Z,1520527122.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:43.107Z,1520527123.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:43.129Z,1520527123.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:43.499Z,1520527123.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:43.535Z,1520527123.535 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:43.535Z,1520527123.535 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 178
2018-03-08T16:38:43.535Z,1520527123.535 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T16:38:43.541Z,1520527123.541 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:43.541Z,1520527123.541 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 178
2018-03-08T16:38:43.541Z,1520527123.541 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T16:38:43.543Z,1520527123.543 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:43.543Z,1520527123.543 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 178
2018-03-08T16:38:43.543Z,1520527123.543 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T16:38:43.567Z,1520527123.567 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T16:38:43.567Z,1520527123.567 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T16:38:43.567Z,1520527123.567 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T16:38:43.903Z,1520527123.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:43.940Z,1520527123.940 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T16:38:43.940Z,1520527123.940 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 178
2018-03-08T16:38:43.941Z,1520527123.941 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T16:38:43.941Z,1520527123.941 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 178
2018-03-08T16:38:43.941Z,1520527123.941 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T16:38:43.942Z,1520527123.942 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 178
2018-03-08T16:38:44.329Z,1520527124.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:44.343Z,1520527124.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T16:38:44.344Z,1520527124.344 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:38:44.344Z,1520527124.344 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:38:44.344Z,1520527124.344 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T16:38:44.345Z,1520527124.345 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:38:44.345Z,1520527124.345 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:38:44.345Z,1520527124.345 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T16:38:44.346Z,1520527124.346 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:38:44.346Z,1520527124.346 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:38:44.726Z,1520527124.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:44.741Z,1520527124.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T16:38:44.742Z,1520527124.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:45.117Z,1520527125.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:45.148Z,1520527125.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T16:38:45.149Z,1520527125.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:45.507Z,1520527125.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:45.534Z,1520527125.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T16:38:45.535Z,1520527125.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:45.903Z,1520527125.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:45.935Z,1520527125.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T16:38:45.936Z,1520527125.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:46.308Z,1520527126.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:46.337Z,1520527126.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T16:38:46.338Z,1520527126.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:46.704Z,1520527126.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:46.742Z,1520527126.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T16:38:46.743Z,1520527126.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:47.107Z,1520527127.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:47.144Z,1520527127.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T16:38:47.145Z,1520527127.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:47.514Z,1520527127.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:47.543Z,1520527127.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T16:38:47.544Z,1520527127.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:47.926Z,1520527127.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:47.941Z,1520527127.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T16:38:47.942Z,1520527127.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:48.326Z,1520527128.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:48.346Z,1520527128.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T16:38:48.347Z,1520527128.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:48.707Z,1520527128.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:48.738Z,1520527128.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T16:38:48.739Z,1520527128.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:49.114Z,1520527129.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:49.140Z,1520527129.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T16:38:49.141Z,1520527129.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:49.503Z,1520527129.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:49.534Z,1520527129.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T16:38:49.535Z,1520527129.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:49.906Z,1520527129.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:49.942Z,1520527129.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T16:38:49.943Z,1520527129.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:50.313Z,1520527130.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:50.349Z,1520527130.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T16:38:50.350Z,1520527130.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:50.717Z,1520527130.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:50.745Z,1520527130.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T16:38:50.746Z,1520527130.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:51.117Z,1520527131.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:51.148Z,1520527131.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T16:38:51.149Z,1520527131.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:51.506Z,1520527131.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:51.532Z,1520527131.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T16:38:51.533Z,1520527131.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:51.903Z,1520527131.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:51.934Z,1520527131.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T16:38:51.935Z,1520527131.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:52.306Z,1520527132.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:52.338Z,1520527132.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T16:38:52.339Z,1520527132.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:52.707Z,1520527132.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:52.737Z,1520527132.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T16:38:52.738Z,1520527132.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:53.107Z,1520527133.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:53.142Z,1520527133.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T16:38:53.143Z,1520527133.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:53.525Z,1520527133.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:53.541Z,1520527133.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T16:38:53.541Z,1520527133.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:53.913Z,1520527133.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:53.938Z,1520527133.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T16:38:53.939Z,1520527133.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:54.320Z,1520527134.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:54.344Z,1520527134.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T16:38:54.345Z,1520527134.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:54.711Z,1520527134.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:54.740Z,1520527134.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T16:38:54.741Z,1520527134.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:55.110Z,1520527135.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:55.140Z,1520527135.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T16:38:55.141Z,1520527135.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:55.504Z,1520527135.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:55.519Z,1520527135.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T16:38:55.520Z,1520527135.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:55.906Z,1520527135.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:55.942Z,1520527135.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T16:38:55.943Z,1520527135.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:56.321Z,1520527136.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:56.345Z,1520527136.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T16:38:56.346Z,1520527136.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:56.725Z,1520527136.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:56.750Z,1520527136.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T16:38:56.751Z,1520527136.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:57.121Z,1520527137.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:57.145Z,1520527137.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T16:38:57.146Z,1520527137.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:57.510Z,1520527137.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:57.525Z,1520527137.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T16:38:57.526Z,1520527137.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:57.903Z,1520527137.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:57.919Z,1520527137.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T16:38:57.920Z,1520527137.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:58.311Z,1520527138.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:58.326Z,1520527138.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T16:38:58.327Z,1520527138.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:58.711Z,1520527138.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:58.726Z,1520527138.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T16:38:58.727Z,1520527138.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:59.103Z,1520527139.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:59.118Z,1520527139.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T16:38:59.119Z,1520527139.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:59.525Z,1520527139.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:59.549Z,1520527139.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T16:38:59.550Z,1520527139.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:38:59.921Z,1520527139.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:38:59.952Z,1520527139.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T16:38:59.953Z,1520527139.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:00.320Z,1520527140.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:00.355Z,1520527140.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T16:39:00.356Z,1520527140.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:00.715Z,1520527140.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:00.750Z,1520527140.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T16:39:00.751Z,1520527140.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:01.107Z,1520527141.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:01.122Z,1520527141.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T16:39:01.123Z,1520527141.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:01.509Z,1520527141.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:01.524Z,1520527141.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T16:39:01.525Z,1520527141.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:01.910Z,1520527141.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:01.930Z,1520527141.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T16:39:01.931Z,1520527141.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:02.325Z,1520527142.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:02.340Z,1520527142.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T16:39:02.362Z,1520527142.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:02.725Z,1520527142.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:02.740Z,1520527142.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T16:39:02.761Z,1520527142.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:03.117Z,1520527143.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:03.132Z,1520527143.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T16:39:03.133Z,1520527143.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:03.514Z,1520527143.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:03.528Z,1520527143.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T16:39:03.529Z,1520527143.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:03.914Z,1520527143.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:03.929Z,1520527143.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:04.311Z,1520527144.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:04.326Z,1520527144.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:04.714Z,1520527144.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:04.730Z,1520527144.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:05.114Z,1520527145.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:05.130Z,1520527145.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:05.517Z,1520527145.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:05.533Z,1520527145.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:05.917Z,1520527145.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:05.932Z,1520527145.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:06.321Z,1520527146.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:06.336Z,1520527146.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:06.711Z,1520527146.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:06.726Z,1520527146.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:07.113Z,1520527147.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:07.128Z,1520527147.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:07.517Z,1520527147.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:07.532Z,1520527147.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:07.911Z,1520527147.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:07.927Z,1520527147.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:08.317Z,1520527148.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:08.332Z,1520527148.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:11.437Z,1520527151.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:11.461Z,1520527151.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:11.578Z,1520527151.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:11.614Z,1520527151.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:11.920Z,1520527151.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:11.935Z,1520527151.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:12.314Z,1520527152.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:12.337Z,1520527152.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:12.720Z,1520527152.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:12.736Z,1520527152.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:13.115Z,1520527153.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:13.130Z,1520527153.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:13.521Z,1520527153.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:13.537Z,1520527153.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:13.920Z,1520527153.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:13.942Z,1520527153.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:14.322Z,1520527154.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:14.337Z,1520527154.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:14.719Z,1520527154.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:14.734Z,1520527154.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:15.119Z,1520527155.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:15.134Z,1520527155.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:15.513Z,1520527155.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:15.533Z,1520527155.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:15.919Z,1520527155.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:15.934Z,1520527155.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:16.321Z,1520527156.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:16.338Z,1520527156.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:16.725Z,1520527156.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:16.740Z,1520527156.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:17.125Z,1520527157.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:17.141Z,1520527157.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:17.509Z,1520527157.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:17.543Z,1520527157.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:17.919Z,1520527157.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:17.934Z,1520527157.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:18.313Z,1520527158.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:18.334Z,1520527158.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:18.719Z,1520527158.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:18.735Z,1520527158.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:19.119Z,1520527159.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:19.135Z,1520527159.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:19.525Z,1520527159.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:19.541Z,1520527159.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:19.924Z,1520527159.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:19.939Z,1520527159.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:20.326Z,1520527160.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:20.346Z,1520527160.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:20.720Z,1520527160.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:20.742Z,1520527160.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:21.119Z,1520527161.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:21.136Z,1520527161.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:21.521Z,1520527161.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:21.537Z,1520527161.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:21.920Z,1520527161.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:21.942Z,1520527161.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:22.325Z,1520527162.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:22.340Z,1520527162.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:22.726Z,1520527162.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:22.746Z,1520527162.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:23.129Z,1520527163.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:23.146Z,1520527163.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:23.516Z,1520527163.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:23.532Z,1520527163.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:23.913Z,1520527163.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:23.936Z,1520527163.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:24.322Z,1520527164.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:24.337Z,1520527164.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:24.712Z,1520527164.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:24.740Z,1520527164.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:25.108Z,1520527165.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:25.147Z,1520527165.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:25.536Z,1520527165.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:25.558Z,1520527165.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:25.936Z,1520527165.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:25.951Z,1520527165.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:26.332Z,1520527166.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:26.348Z,1520527166.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:26.711Z,1520527166.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:26.740Z,1520527166.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:27.103Z,1520527167.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:27.140Z,1520527167.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:27.507Z,1520527167.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:27.543Z,1520527167.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:27.907Z,1520527167.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:27.941Z,1520527167.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:28.325Z,1520527168.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:28.342Z,1520527168.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:28.730Z,1520527168.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:28.746Z,1520527168.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:29.130Z,1520527169.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:29.145Z,1520527169.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:29.503Z,1520527169.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:29.538Z,1520527169.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:29.906Z,1520527169.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:29.939Z,1520527169.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:30.310Z,1520527170.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:30.343Z,1520527170.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:30.711Z,1520527170.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:30.742Z,1520527170.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:31.106Z,1520527171.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:31.143Z,1520527171.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:31.531Z,1520527171.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:31.546Z,1520527171.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:31.933Z,1520527171.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:31.948Z,1520527171.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:32.317Z,1520527172.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:32.355Z,1520527172.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:32.714Z,1520527172.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:32.746Z,1520527172.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:33.115Z,1520527173.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:33.144Z,1520527173.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:33.515Z,1520527173.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:33.544Z,1520527173.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:33.911Z,1520527173.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:33.946Z,1520527173.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:34.330Z,1520527174.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:34.345Z,1520527174.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:34.734Z,1520527174.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:34.750Z,1520527174.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:35.124Z,1520527175.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:35.146Z,1520527175.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:35.515Z,1520527175.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:35.545Z,1520527175.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:35.914Z,1520527175.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:35.944Z,1520527175.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:36.315Z,1520527176.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:36.344Z,1520527176.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:36.715Z,1520527176.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:36.744Z,1520527176.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:37.114Z,1520527177.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:37.144Z,1520527177.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:37.529Z,1520527177.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:37.549Z,1520527177.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:37.935Z,1520527177.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:37.950Z,1520527177.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:38.332Z,1520527178.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:38.347Z,1520527178.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:38.711Z,1520527178.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:38.745Z,1520527178.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:39.115Z,1520527179.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:39.144Z,1520527179.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:39.515Z,1520527179.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:39.545Z,1520527179.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:39.914Z,1520527179.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:39.945Z,1520527179.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:40.332Z,1520527180.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:40.347Z,1520527180.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:40.735Z,1520527180.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:40.750Z,1520527180.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:41.124Z,1520527181.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:41.147Z,1520527181.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:41.515Z,1520527181.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:41.544Z,1520527181.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:41.914Z,1520527181.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:41.944Z,1520527181.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:42.315Z,1520527182.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:42.345Z,1520527182.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:42.714Z,1520527182.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:42.744Z,1520527182.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:43.108Z,1520527183.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:43.123Z,1520527183.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:43.537Z,1520527183.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:43.552Z,1520527183.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:43.921Z,1520527183.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:43.945Z,1520527183.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:44.325Z,1520527184.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:44.355Z,1520527184.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:44.711Z,1520527184.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:44.726Z,1520527184.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:45.109Z,1520527185.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:45.124Z,1520527185.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:45.515Z,1520527185.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:45.550Z,1520527185.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:45.914Z,1520527185.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:45.929Z,1520527185.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:46.329Z,1520527186.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:46.360Z,1520527186.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:46.725Z,1520527186.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:46.740Z,1520527186.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:47.129Z,1520527187.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:47.144Z,1520527187.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:47.516Z,1520527187.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:47.531Z,1520527187.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:47.915Z,1520527187.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:47.931Z,1520527187.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:48.314Z,1520527188.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:48.330Z,1520527188.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:48.717Z,1520527188.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:48.732Z,1520527188.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:49.114Z,1520527189.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:49.129Z,1520527189.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:49.521Z,1520527189.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:49.536Z,1520527189.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:49.929Z,1520527189.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:49.944Z,1520527189.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:50.321Z,1520527190.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:50.337Z,1520527190.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:50.718Z,1520527190.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:50.733Z,1520527190.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:51.118Z,1520527191.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:51.133Z,1520527191.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:51.513Z,1520527191.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:51.535Z,1520527191.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:51.918Z,1520527191.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:51.934Z,1520527191.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:52.319Z,1520527192.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:52.351Z,1520527192.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:52.728Z,1520527192.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:52.743Z,1520527192.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:53.128Z,1520527193.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:53.143Z,1520527193.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:53.519Z,1520527193.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:53.538Z,1520527193.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:53.915Z,1520527193.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:53.934Z,1520527193.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:54.316Z,1520527194.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:54.338Z,1520527194.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:54.721Z,1520527194.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:54.736Z,1520527194.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:55.111Z,1520527195.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:55.133Z,1520527195.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:55.528Z,1520527195.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:55.543Z,1520527195.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:55.928Z,1520527195.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:55.943Z,1520527195.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:56.328Z,1520527196.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:56.343Z,1520527196.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:56.720Z,1520527196.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:56.735Z,1520527196.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:57.119Z,1520527197.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:57.138Z,1520527197.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:57.529Z,1520527197.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:57.544Z,1520527197.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:57.919Z,1520527197.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:57.934Z,1520527197.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:58.329Z,1520527198.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:58.344Z,1520527198.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:58.729Z,1520527198.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:58.750Z,1520527198.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:59.130Z,1520527199.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:59.145Z,1520527199.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:59.519Z,1520527199.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:59.538Z,1520527199.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:39:59.906Z,1520527199.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:39:59.942Z,1520527199.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:00.321Z,1520527200.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:00.336Z,1520527200.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:00.705Z,1520527200.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:00.733Z,1520527200.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:01.123Z,1520527201.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:01.142Z,1520527201.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:01.535Z,1520527201.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:01.550Z,1520527201.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:01.917Z,1520527201.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:01.941Z,1520527201.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:02.330Z,1520527202.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:02.350Z,1520527202.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:02.708Z,1520527202.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:02.736Z,1520527202.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:03.101Z,1520527203.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:03.140Z,1520527203.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:03.530Z,1520527203.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:03.545Z,1520527203.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:03.922Z,1520527203.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:03.937Z,1520527203.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:04.331Z,1520527204.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:04.354Z,1520527204.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:04.732Z,1520527204.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:04.754Z,1520527204.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:05.131Z,1520527205.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:05.146Z,1520527205.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:05.518Z,1520527205.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:05.539Z,1520527205.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:05.907Z,1520527205.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:05.943Z,1520527205.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:06.304Z,1520527206.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:06.336Z,1520527206.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:06.705Z,1520527206.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:06.731Z,1520527206.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:07.123Z,1520527207.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:07.138Z,1520527207.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:07.524Z,1520527207.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:07.539Z,1520527207.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:07.921Z,1520527207.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:07.940Z,1520527207.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:08.325Z,1520527208.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:08.346Z,1520527208.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:08.711Z,1520527208.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:08.737Z,1520527208.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:11.829Z,1520527211.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:11.845Z,1520527211.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:11.936Z,1520527211.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:11.980Z,1520527211.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:12.318Z,1520527212.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:12.333Z,1520527212.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:12.705Z,1520527212.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:12.731Z,1520527212.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:13.105Z,1520527213.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:13.130Z,1520527213.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:13.495Z,1520527213.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:13.523Z,1520527213.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:13.899Z,1520527213.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:13.914Z,1520527213.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:14.298Z,1520527214.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:14.318Z,1520527214.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:14.699Z,1520527214.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:14.715Z,1520527214.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:15.099Z,1520527215.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:15.114Z,1520527215.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:15.505Z,1520527215.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:15.521Z,1520527215.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:15.905Z,1520527215.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:15.926Z,1520527215.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:16.305Z,1520527216.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:16.320Z,1520527216.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:16.698Z,1520527216.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:16.714Z,1520527216.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:17.102Z,1520527217.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:17.117Z,1520527217.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:17.496Z,1520527217.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:17.511Z,1520527217.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:17.902Z,1520527217.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:17.922Z,1520527217.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:18.309Z,1520527218.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:18.325Z,1520527218.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:18.709Z,1520527218.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:18.724Z,1520527218.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:19.105Z,1520527219.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:19.121Z,1520527219.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:19.499Z,1520527219.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:19.514Z,1520527219.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:19.896Z,1520527219.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:19.911Z,1520527219.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:20.302Z,1520527220.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:20.322Z,1520527220.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:20.703Z,1520527220.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:20.719Z,1520527220.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:21.103Z,1520527221.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:21.117Z,1520527221.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:21.509Z,1520527221.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:21.525Z,1520527221.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:21.905Z,1520527221.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:21.921Z,1520527221.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:22.309Z,1520527222.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:22.347Z,1520527222.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:22.702Z,1520527222.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:22.722Z,1520527222.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:23.102Z,1520527223.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:23.117Z,1520527223.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:23.495Z,1520527223.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:23.510Z,1520527223.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:23.901Z,1520527223.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:23.916Z,1520527223.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:24.309Z,1520527224.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:24.325Z,1520527224.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:24.704Z,1520527224.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:24.719Z,1520527224.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:25.109Z,1520527225.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:25.125Z,1520527225.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:25.502Z,1520527225.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:25.518Z,1520527225.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:25.895Z,1520527225.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:25.910Z,1520527225.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:26.302Z,1520527226.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:26.323Z,1520527226.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:26.703Z,1520527226.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:26.722Z,1520527226.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:27.103Z,1520527227.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:27.118Z,1520527227.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:27.509Z,1520527227.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:27.525Z,1520527227.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:27.905Z,1520527227.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:27.921Z,1520527227.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:28.310Z,1520527228.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:28.325Z,1520527228.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:28.701Z,1520527228.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:28.716Z,1520527228.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:29.097Z,1520527229.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:29.117Z,1520527229.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:29.496Z,1520527229.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:29.511Z,1520527229.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:29.902Z,1520527229.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:29.922Z,1520527229.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:30.309Z,1520527230.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:30.346Z,1520527230.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:30.709Z,1520527230.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:30.724Z,1520527230.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:31.109Z,1520527231.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:31.125Z,1520527231.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:31.499Z,1520527231.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:31.514Z,1520527231.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:31.896Z,1520527231.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:31.910Z,1520527231.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:32.302Z,1520527232.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:32.322Z,1520527232.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:32.697Z,1520527232.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:32.717Z,1520527232.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:33.105Z,1520527233.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:33.120Z,1520527233.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:33.509Z,1520527233.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:33.525Z,1520527233.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:33.909Z,1520527233.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:33.924Z,1520527233.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:34.309Z,1520527234.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:34.330Z,1520527234.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:34.701Z,1520527234.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:34.716Z,1520527234.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:35.098Z,1520527235.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:35.125Z,1520527235.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:35.505Z,1520527235.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:35.520Z,1520527235.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:35.899Z,1520527235.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:35.915Z,1520527235.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:36.309Z,1520527236.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:36.325Z,1520527236.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:36.710Z,1520527236.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:36.725Z,1520527236.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:37.106Z,1520527237.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:37.123Z,1520527237.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:37.495Z,1520527237.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:37.518Z,1520527237.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:37.899Z,1520527237.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:37.914Z,1520527237.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:38.295Z,1520527238.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:38.311Z,1520527238.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:38.695Z,1520527238.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:38.722Z,1520527238.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:39.104Z,1520527239.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:39.120Z,1520527239.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:39.513Z,1520527239.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:39.529Z,1520527239.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:39.914Z,1520527239.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:39.929Z,1520527239.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:40.313Z,1520527240.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:40.329Z,1520527240.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:40.697Z,1520527240.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:40.717Z,1520527240.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:41.095Z,1520527241.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:41.119Z,1520527241.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:41.487Z,1520527241.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:41.522Z,1520527241.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:41.885Z,1520527241.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:41.913Z,1520527241.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:42.309Z,1520527242.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:42.325Z,1520527242.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:42.710Z,1520527242.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:42.725Z,1520527242.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:43.108Z,1520527243.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:43.124Z,1520527243.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:43.503Z,1520527243.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:43.519Z,1520527243.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:43.887Z,1520527243.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:43.913Z,1520527243.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:44.303Z,1520527244.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:44.318Z,1520527244.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:44.705Z,1520527244.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:44.720Z,1520527244.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:45.104Z,1520527245.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:45.118Z,1520527245.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:45.512Z,1520527245.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:45.528Z,1520527245.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:45.912Z,1520527245.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:45.934Z,1520527245.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:46.313Z,1520527246.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:46.328Z,1520527246.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:46.685Z,1520527246.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:46.717Z,1520527246.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:47.103Z,1520527247.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:47.123Z,1520527247.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:47.492Z,1520527247.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:47.518Z,1520527247.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:47.884Z,1520527247.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:47.918Z,1520527247.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:48.316Z,1520527248.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:48.331Z,1520527248.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:48.716Z,1520527248.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:48.731Z,1520527248.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:49.102Z,1520527249.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:49.133Z,1520527249.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:49.504Z,1520527249.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:49.519Z,1520527249.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:49.887Z,1520527249.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:49.913Z,1520527249.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:50.287Z,1520527250.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:50.313Z,1520527250.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:50.691Z,1520527250.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:50.726Z,1520527250.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:51.103Z,1520527251.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:51.118Z,1520527251.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:51.510Z,1520527251.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:51.526Z,1520527251.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:51.912Z,1520527251.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:51.928Z,1520527251.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:52.314Z,1520527252.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:52.329Z,1520527252.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:52.688Z,1520527252.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:52.726Z,1520527252.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:53.103Z,1520527253.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:53.122Z,1520527253.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:53.491Z,1520527253.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:53.518Z,1520527253.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:53.884Z,1520527253.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:53.918Z,1520527253.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:54.310Z,1520527254.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:54.325Z,1520527254.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:54.708Z,1520527254.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:54.731Z,1520527254.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:55.105Z,1520527255.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:55.137Z,1520527255.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:55.503Z,1520527255.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:55.518Z,1520527255.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:55.887Z,1520527255.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:55.918Z,1520527255.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:56.303Z,1520527256.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:56.326Z,1520527256.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:56.691Z,1520527256.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:56.731Z,1520527256.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:57.095Z,1520527257.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:57.121Z,1520527257.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:57.509Z,1520527257.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:57.525Z,1520527257.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:57.913Z,1520527257.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:57.928Z,1520527257.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:58.304Z,1520527258.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:58.336Z,1520527258.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:58.688Z,1520527258.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:58.722Z,1520527258.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:59.092Z,1520527259.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:59.118Z,1520527259.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:59.487Z,1520527259.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:59.518Z,1520527259.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:40:59.888Z,1520527259.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:40:59.922Z,1520527259.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:00.314Z,1520527260.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:00.359Z,1520527260.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:00.714Z,1520527260.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:00.734Z,1520527260.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:01.110Z,1520527261.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:01.126Z,1520527261.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:01.495Z,1520527261.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:01.521Z,1520527261.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:01.901Z,1520527261.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:01.935Z,1520527261.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:02.293Z,1520527262.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:02.328Z,1520527262.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:02.718Z,1520527262.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:02.746Z,1520527262.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:03.092Z,1520527263.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:03.150Z,1520527263.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:03.478Z,1520527263.478 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T16:41:03.478Z,1520527263.478 [NAL9602] Data Fault, FailCount= 5
2018-03-08T16:41:03.478Z,1520527263.478 [NAL9602](ERROR): Data Fault
2018-03-08T16:41:03.495Z,1520527263.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:03.535Z,1520527263.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:03.556Z,1520527263.556 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T16:41:03.560Z,1520527263.560 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-08T16:41:03.880Z,1520527263.880 [NAL9602](INFO): Powering down
2018-03-08T16:41:03.897Z,1520527263.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:03.913Z,1520527263.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:03.948Z,1520527263.948 [CBIT](INFO): Critical error at 20180308T164103
2018-03-08T16:41:04.294Z,1520527264.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:04.309Z,1520527264.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:04.692Z,1520527264.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:04.748Z,1520527264.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:05.106Z,1520527265.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:05.140Z,1520527265.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:05.492Z,1520527265.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:05.507Z,1520527265.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:05.890Z,1520527265.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:05.907Z,1520527265.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:06.298Z,1520527266.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:06.318Z,1520527266.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:06.690Z,1520527266.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:06.716Z,1520527266.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:07.091Z,1520527267.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:07.106Z,1520527267.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:07.495Z,1520527267.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:07.510Z,1520527267.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:07.898Z,1520527267.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:07.914Z,1520527267.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:08.291Z,1520527268.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:08.306Z,1520527268.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:08.696Z,1520527268.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:08.711Z,1520527268.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:09.098Z,1520527269.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:09.113Z,1520527269.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:12.190Z,1520527272.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:12.207Z,1520527272.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:12.308Z,1520527272.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:12.346Z,1520527272.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:12.666Z,1520527272.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:12.702Z,1520527272.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:13.063Z,1520527273.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:13.077Z,1520527273.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:13.456Z,1520527273.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:13.473Z,1520527273.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:13.859Z,1520527273.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:13.875Z,1520527273.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:14.262Z,1520527274.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:14.278Z,1520527274.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:14.655Z,1520527274.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:14.671Z,1520527274.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:15.062Z,1520527275.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:15.079Z,1520527275.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:15.462Z,1520527275.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:15.478Z,1520527275.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:15.854Z,1520527275.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:15.870Z,1520527275.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:16.262Z,1520527276.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:16.283Z,1520527276.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:16.662Z,1520527276.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:16.677Z,1520527276.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:17.055Z,1520527277.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:17.071Z,1520527277.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:17.463Z,1520527277.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:17.478Z,1520527277.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:17.858Z,1520527277.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:17.874Z,1520527277.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:18.263Z,1520527278.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:18.279Z,1520527278.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:18.660Z,1520527278.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:18.684Z,1520527278.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:19.066Z,1520527279.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:19.081Z,1520527279.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:19.466Z,1520527279.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:19.482Z,1520527279.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:19.861Z,1520527279.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:19.877Z,1520527279.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:20.265Z,1520527280.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:20.281Z,1520527280.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:20.659Z,1520527280.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:20.674Z,1520527280.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:21.066Z,1520527281.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:21.082Z,1520527281.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:21.465Z,1520527281.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:21.481Z,1520527281.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:21.847Z,1520527281.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:21.879Z,1520527281.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:22.266Z,1520527282.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:22.281Z,1520527282.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:22.650Z,1520527282.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:22.678Z,1520527282.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:23.047Z,1520527283.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:23.080Z,1520527283.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:23.466Z,1520527283.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:23.481Z,1520527283.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:23.850Z,1520527283.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:23.883Z,1520527283.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:24.265Z,1520527284.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:24.281Z,1520527284.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:24.653Z,1520527284.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:24.686Z,1520527284.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:25.054Z,1520527285.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:25.091Z,1520527285.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:25.458Z,1520527285.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:25.484Z,1520527285.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:25.856Z,1520527285.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:25.887Z,1520527285.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:26.258Z,1520527286.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:26.283Z,1520527286.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:26.647Z,1520527286.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:26.663Z,1520527286.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:27.053Z,1520527287.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:27.068Z,1520527287.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:27.458Z,1520527287.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:27.496Z,1520527287.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:27.847Z,1520527287.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:27.864Z,1520527287.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:28.262Z,1520527288.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:28.292Z,1520527288.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:28.659Z,1520527288.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:28.692Z,1520527288.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:29.051Z,1520527289.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:29.066Z,1520527289.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:29.458Z,1520527289.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:29.498Z,1520527289.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:29.858Z,1520527289.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:29.874Z,1520527289.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:30.251Z,1520527290.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:30.266Z,1520527290.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:30.662Z,1520527290.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:30.699Z,1520527290.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:31.062Z,1520527291.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:31.077Z,1520527291.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:31.455Z,1520527291.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:31.470Z,1520527291.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:31.862Z,1520527291.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:31.883Z,1520527291.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:32.259Z,1520527292.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:32.273Z,1520527292.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:32.659Z,1520527292.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:32.674Z,1520527292.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:33.063Z,1520527293.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:33.078Z,1520527293.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:33.463Z,1520527293.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:33.478Z,1520527293.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:33.855Z,1520527293.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:33.870Z,1520527293.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:34.259Z,1520527294.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:34.274Z,1520527294.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:34.657Z,1520527294.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:34.672Z,1520527294.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:35.058Z,1520527295.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:35.073Z,1520527295.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:35.459Z,1520527295.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:35.475Z,1520527295.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:35.863Z,1520527295.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:35.877Z,1520527295.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:36.259Z,1520527296.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:36.274Z,1520527296.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:36.661Z,1520527296.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:36.676Z,1520527296.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:37.062Z,1520527297.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:37.077Z,1520527297.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:37.459Z,1520527297.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:37.475Z,1520527297.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:37.863Z,1520527297.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:37.878Z,1520527297.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:38.263Z,1520527298.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:38.278Z,1520527298.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:38.655Z,1520527298.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:38.670Z,1520527298.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:39.063Z,1520527299.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:39.079Z,1520527299.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:39.462Z,1520527299.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:39.478Z,1520527299.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:39.855Z,1520527299.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:39.871Z,1520527299.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:40.263Z,1520527300.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:40.278Z,1520527300.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:40.662Z,1520527300.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:40.677Z,1520527300.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:41.058Z,1520527301.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:41.073Z,1520527301.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:41.463Z,1520527301.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:41.478Z,1520527301.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:41.863Z,1520527301.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:41.878Z,1520527301.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:42.259Z,1520527302.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:42.275Z,1520527302.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:42.663Z,1520527302.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:42.678Z,1520527302.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:43.063Z,1520527303.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:43.078Z,1520527303.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:43.457Z,1520527303.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:43.472Z,1520527303.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:43.863Z,1520527303.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:43.878Z,1520527303.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:44.263Z,1520527304.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:44.278Z,1520527304.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:44.655Z,1520527304.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:44.671Z,1520527304.671 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:44.671Z,1520527304.671 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 179
2018-03-08T16:41:44.671Z,1520527304.671 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T16:41:44.673Z,1520527304.673 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:44.673Z,1520527304.673 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 179
2018-03-08T16:41:44.673Z,1520527304.673 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T16:41:44.675Z,1520527304.675 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:44.675Z,1520527304.675 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 179
2018-03-08T16:41:44.675Z,1520527304.675 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T16:41:44.687Z,1520527304.687 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T16:41:44.687Z,1520527304.687 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T16:41:44.687Z,1520527304.687 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T16:41:45.070Z,1520527305.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:45.117Z,1520527305.117 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T16:41:45.117Z,1520527305.117 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 179
2018-03-08T16:41:45.117Z,1520527305.117 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T16:41:45.118Z,1520527305.118 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 179
2018-03-08T16:41:45.118Z,1520527305.118 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T16:41:45.118Z,1520527305.118 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 179
2018-03-08T16:41:45.457Z,1520527305.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:45.477Z,1520527305.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T16:41:45.478Z,1520527305.478 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:41:45.478Z,1520527305.478 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:41:45.478Z,1520527305.478 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T16:41:45.479Z,1520527305.479 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:41:45.479Z,1520527305.479 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:41:45.479Z,1520527305.479 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T16:41:45.480Z,1520527305.480 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:41:45.480Z,1520527305.480 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:41:45.857Z,1520527305.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:45.873Z,1520527305.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T16:41:45.874Z,1520527305.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:46.257Z,1520527306.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:46.280Z,1520527306.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T16:41:46.281Z,1520527306.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:46.657Z,1520527306.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:46.678Z,1520527306.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T16:41:46.679Z,1520527306.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:47.061Z,1520527307.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:47.076Z,1520527307.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T16:41:47.077Z,1520527307.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:47.462Z,1520527307.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:47.477Z,1520527307.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T16:41:47.478Z,1520527307.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:47.858Z,1520527307.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:47.878Z,1520527307.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T16:41:47.879Z,1520527307.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:48.267Z,1520527308.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:48.282Z,1520527308.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T16:41:48.283Z,1520527308.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:48.661Z,1520527308.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:48.682Z,1520527308.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T16:41:48.683Z,1520527308.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:49.063Z,1520527309.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:49.078Z,1520527309.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T16:41:49.079Z,1520527309.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:49.460Z,1520527309.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:49.475Z,1520527309.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T16:41:49.476Z,1520527309.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:49.861Z,1520527309.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:49.881Z,1520527309.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T16:41:49.882Z,1520527309.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:50.259Z,1520527310.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:50.273Z,1520527310.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T16:41:50.274Z,1520527310.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:50.660Z,1520527310.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:50.675Z,1520527310.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T16:41:50.676Z,1520527310.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:51.062Z,1520527311.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:51.081Z,1520527311.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T16:41:51.082Z,1520527311.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:51.467Z,1520527311.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:51.481Z,1520527311.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T16:41:51.482Z,1520527311.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:51.867Z,1520527311.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:51.882Z,1520527311.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T16:41:51.883Z,1520527311.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:52.260Z,1520527312.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:52.279Z,1520527312.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T16:41:52.283Z,1520527312.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:52.666Z,1520527312.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:52.681Z,1520527312.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T16:41:52.682Z,1520527312.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:53.052Z,1520527313.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:53.083Z,1520527313.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T16:41:53.084Z,1520527313.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:53.468Z,1520527313.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:53.483Z,1520527313.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T16:41:53.484Z,1520527313.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:53.855Z,1520527313.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:53.886Z,1520527313.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T16:41:53.887Z,1520527313.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:54.266Z,1520527314.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:54.281Z,1520527314.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T16:41:54.282Z,1520527314.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:54.654Z,1520527314.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:54.679Z,1520527314.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T16:41:54.680Z,1520527314.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:55.054Z,1520527315.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:55.091Z,1520527315.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T16:41:55.092Z,1520527315.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:55.465Z,1520527315.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:55.481Z,1520527315.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T16:41:55.482Z,1520527315.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:55.495Z,1520527315.495 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T16:41:55.854Z,1520527315.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:55.880Z,1520527315.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T16:41:55.881Z,1520527315.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:56.254Z,1520527316.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:56.283Z,1520527316.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T16:41:56.284Z,1520527316.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:56.638Z,1520527316.638 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-03-08T16:41:56.638Z,1520527316.638 [DropWeight] Hardware Fault, FailCount= 1
2018-03-08T16:41:56.638Z,1520527316.638 [DropWeight](ERROR): Hardware Fault
2018-03-08T16:41:56.654Z,1520527316.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:56.710Z,1520527316.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T16:41:56.711Z,1520527316.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:56.751Z,1520527316.751 [CBIT](INFO): Critical error at 20180308T164156
2018-03-08T16:41:56.761Z,1520527316.761 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-03-08T16:41:56.762Z,1520527316.762 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-03-08T16:41:57.062Z,1520527317.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:57.099Z,1520527317.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T16:41:57.100Z,1520527317.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:57.119Z,1520527317.119 [CBIT](INFO): Critical error at 20180308T164156
2018-03-08T16:41:57.459Z,1520527317.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:57.546Z,1520527317.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-08T16:41:57.547Z,1520527317.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:57.871Z,1520527317.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:57.905Z,1520527317.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T16:41:57.906Z,1520527317.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:58.262Z,1520527318.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:58.277Z,1520527318.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T16:41:58.278Z,1520527318.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:58.659Z,1520527318.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:58.674Z,1520527318.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T16:41:58.675Z,1520527318.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:59.061Z,1520527319.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:59.076Z,1520527319.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T16:41:59.077Z,1520527319.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:59.469Z,1520527319.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:59.484Z,1520527319.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T16:41:59.485Z,1520527319.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:41:59.872Z,1520527319.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:41:59.926Z,1520527319.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-08T16:41:59.927Z,1520527319.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:00.262Z,1520527320.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:00.285Z,1520527320.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T16:42:00.286Z,1520527320.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:00.664Z,1520527320.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:00.679Z,1520527320.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T16:42:00.680Z,1520527320.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:01.064Z,1520527321.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:01.078Z,1520527321.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T16:42:01.079Z,1520527321.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:01.463Z,1520527321.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:01.486Z,1520527321.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T16:42:01.487Z,1520527321.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:01.869Z,1520527321.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:01.883Z,1520527321.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T16:42:01.884Z,1520527321.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:02.265Z,1520527322.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:02.279Z,1520527322.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T16:42:02.280Z,1520527322.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:02.658Z,1520527322.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:02.674Z,1520527322.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T16:42:02.675Z,1520527322.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:03.060Z,1520527323.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:03.075Z,1520527323.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T16:42:03.076Z,1520527323.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:03.465Z,1520527323.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:03.479Z,1520527323.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T16:42:03.480Z,1520527323.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:03.847Z,1520527323.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:03.875Z,1520527323.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T16:42:03.876Z,1520527323.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:04.265Z,1520527324.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:04.279Z,1520527324.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T16:42:04.280Z,1520527324.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:04.665Z,1520527324.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:04.679Z,1520527324.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:05.051Z,1520527325.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:05.077Z,1520527325.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:05.462Z,1520527325.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:05.482Z,1520527325.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:05.864Z,1520527325.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:05.879Z,1520527325.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:06.265Z,1520527326.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:06.281Z,1520527326.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:06.661Z,1520527326.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:06.675Z,1520527326.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:07.062Z,1520527327.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:07.077Z,1520527327.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:07.080Z,1520527327.080 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T16:37:06.7Z
2018-03-08T16:42:07.080Z,1520527327.080 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T16:42:07.080Z,1520527327.080 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T16:42:07.451Z,1520527327.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:07.478Z,1520527327.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:07.945Z,1520527327.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:07.968Z,1520527327.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:08.265Z,1520527328.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:08.280Z,1520527328.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:11.386Z,1520527331.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:11.402Z,1520527331.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:11.500Z,1520527331.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:11.531Z,1520527331.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:11.861Z,1520527331.861 [DataOverHttps](INFO): Sending 123 bytes from file Logs/20180308T074127/Courier0208.lzma
2018-03-08T16:42:11.887Z,1520527331.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:11.915Z,1520527331.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:12.289Z,1520527332.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:12.304Z,1520527332.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:12.659Z,1520527332.659 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0208.lzma.bak
2018-03-08T16:42:12.659Z,1520527332.659 [DataOverHttps](INFO): SBD MOMSN=7987367
2018-03-08T16:42:12.692Z,1520527332.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:12.730Z,1520527332.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:13.256Z,1520527333.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:13.288Z,1520527333.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:13.481Z,1520527333.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:13.496Z,1520527333.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:16.586Z,1520527336.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:16.601Z,1520527336.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:16.692Z,1520527336.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:16.737Z,1520527336.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:17.055Z,1520527337.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:17.090Z,1520527337.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:17.450Z,1520527337.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:17.464Z,1520527337.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:17.854Z,1520527337.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:17.870Z,1520527337.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:18.251Z,1520527338.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:18.267Z,1520527338.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:18.648Z,1520527338.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:18.663Z,1520527338.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:21.753Z,1520527341.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:21.772Z,1520527341.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:21.862Z,1520527341.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:21.877Z,1520527341.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:22.251Z,1520527342.251 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0209.lzma
2018-03-08T16:42:22.277Z,1520527342.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:22.300Z,1520527342.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:22.666Z,1520527342.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:22.681Z,1520527342.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:23.043Z,1520527343.043 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0209.lzma.bak
2018-03-08T16:42:23.043Z,1520527343.043 [DataOverHttps](INFO): SBD MOMSN=7987372
2018-03-08T16:42:23.064Z,1520527343.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:23.079Z,1520527343.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:23.633Z,1520527343.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:23.656Z,1520527343.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:23.659Z,1520527343.659 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T16:42:23.659Z,1520527343.659 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T16:42:23.659Z,1520527343.659 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T16:42:23.868Z,1520527343.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:23.884Z,1520527343.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:26.964Z,1520527346.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:26.980Z,1520527346.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:27.075Z,1520527347.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:27.122Z,1520527347.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:27.465Z,1520527347.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:27.486Z,1520527347.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:27.865Z,1520527347.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:27.880Z,1520527347.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:28.268Z,1520527348.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:28.283Z,1520527348.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:28.663Z,1520527348.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:28.678Z,1520527348.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:29.062Z,1520527349.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:29.077Z,1520527349.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:29.458Z,1520527349.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:29.475Z,1520527349.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:29.865Z,1520527349.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:29.881Z,1520527349.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:30.265Z,1520527350.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:30.281Z,1520527350.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:30.647Z,1520527350.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:30.680Z,1520527350.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:31.061Z,1520527351.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:31.076Z,1520527351.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:31.462Z,1520527351.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:31.477Z,1520527351.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:31.851Z,1520527351.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:31.883Z,1520527351.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:32.265Z,1520527352.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:32.280Z,1520527352.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:32.654Z,1520527352.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:32.680Z,1520527352.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:33.051Z,1520527353.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:33.082Z,1520527353.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:33.466Z,1520527353.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:33.481Z,1520527353.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:33.865Z,1520527353.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:33.880Z,1520527353.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:34.265Z,1520527354.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:34.281Z,1520527354.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:34.653Z,1520527354.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:34.686Z,1520527354.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:35.065Z,1520527355.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:35.080Z,1520527355.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:35.465Z,1520527355.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:35.481Z,1520527355.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:35.873Z,1520527355.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:35.945Z,1520527355.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:36.255Z,1520527356.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:36.280Z,1520527356.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:36.651Z,1520527356.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:36.682Z,1520527356.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:37.054Z,1520527357.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:37.078Z,1520527357.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:37.465Z,1520527357.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:37.480Z,1520527357.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:37.851Z,1520527357.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:37.885Z,1520527357.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:38.254Z,1520527358.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:38.286Z,1520527358.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:38.665Z,1520527358.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:38.679Z,1520527358.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:39.051Z,1520527359.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:39.079Z,1520527359.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:39.457Z,1520527359.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:39.482Z,1520527359.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:39.854Z,1520527359.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:39.879Z,1520527359.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:40.258Z,1520527360.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:40.284Z,1520527360.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:40.653Z,1520527360.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:40.686Z,1520527360.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:41.057Z,1520527361.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:41.082Z,1520527361.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:41.457Z,1520527361.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:41.483Z,1520527361.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:41.853Z,1520527361.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:41.879Z,1520527361.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:42.257Z,1520527362.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:42.283Z,1520527362.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:42.647Z,1520527362.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:42.671Z,1520527362.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:43.057Z,1520527363.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:43.082Z,1520527363.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:43.458Z,1520527363.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:43.482Z,1520527363.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:43.851Z,1520527363.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:43.874Z,1520527363.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:44.257Z,1520527364.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:44.290Z,1520527364.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:44.657Z,1520527364.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:44.690Z,1520527364.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:45.047Z,1520527365.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:45.063Z,1520527365.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:45.453Z,1520527365.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:45.468Z,1520527365.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:45.876Z,1520527365.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:45.916Z,1520527365.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:46.250Z,1520527366.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:46.265Z,1520527366.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:46.657Z,1520527366.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:46.672Z,1520527366.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:47.067Z,1520527367.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:47.095Z,1520527367.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:47.448Z,1520527367.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:47.464Z,1520527367.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:47.859Z,1520527367.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:47.896Z,1520527367.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:48.255Z,1520527368.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:48.271Z,1520527368.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:48.657Z,1520527368.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:48.673Z,1520527368.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:49.061Z,1520527369.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:49.076Z,1520527369.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:49.458Z,1520527369.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:49.473Z,1520527369.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:49.861Z,1520527369.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:49.876Z,1520527369.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:50.261Z,1520527370.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:50.276Z,1520527370.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:50.662Z,1520527370.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:50.677Z,1520527370.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:51.054Z,1520527371.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:51.069Z,1520527371.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:51.458Z,1520527371.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:51.473Z,1520527371.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:51.855Z,1520527371.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:51.874Z,1520527371.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:52.261Z,1520527372.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:52.277Z,1520527372.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:52.661Z,1520527372.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:52.676Z,1520527372.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:53.062Z,1520527373.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:53.077Z,1520527373.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:53.458Z,1520527373.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:53.473Z,1520527373.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:53.867Z,1520527373.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:53.914Z,1520527373.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:54.262Z,1520527374.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:54.282Z,1520527374.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:54.658Z,1520527374.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:54.673Z,1520527374.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:55.058Z,1520527375.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:55.073Z,1520527375.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:55.459Z,1520527375.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:55.478Z,1520527375.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:55.860Z,1520527375.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:55.875Z,1520527375.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:56.261Z,1520527376.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:56.282Z,1520527376.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:56.666Z,1520527376.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:56.681Z,1520527376.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:57.064Z,1520527377.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:57.079Z,1520527377.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:57.464Z,1520527377.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:57.479Z,1520527377.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:57.864Z,1520527377.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:57.880Z,1520527377.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:58.264Z,1520527378.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:58.279Z,1520527378.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:58.661Z,1520527378.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:58.677Z,1520527378.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:59.065Z,1520527379.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:59.080Z,1520527379.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:59.462Z,1520527379.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:59.477Z,1520527379.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:42:59.861Z,1520527379.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:42:59.876Z,1520527379.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:00.262Z,1520527380.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:00.277Z,1520527380.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:00.657Z,1520527380.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:00.672Z,1520527380.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:01.062Z,1520527381.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:01.077Z,1520527381.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:01.466Z,1520527381.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:01.481Z,1520527381.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:01.861Z,1520527381.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:01.877Z,1520527381.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:02.262Z,1520527382.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:02.277Z,1520527382.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:02.657Z,1520527382.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:02.677Z,1520527382.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:03.062Z,1520527383.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:03.077Z,1520527383.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:03.461Z,1520527383.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:03.479Z,1520527383.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:03.492Z,1520527383.492 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T16:43:03.492Z,1520527383.492 [NAL9602] No Fault, FailCount= 5
2018-03-08T16:43:03.835Z,1520527383.835 [NAL9602](INFO): Powering up NAL9602
2018-03-08T16:43:03.863Z,1520527383.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:03.890Z,1520527383.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:04.267Z,1520527384.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:04.282Z,1520527384.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:04.666Z,1520527384.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:04.681Z,1520527384.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:05.059Z,1520527385.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:05.074Z,1520527385.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:05.461Z,1520527385.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:05.477Z,1520527385.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:05.861Z,1520527385.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:05.876Z,1520527385.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:06.267Z,1520527386.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:06.282Z,1520527386.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:06.661Z,1520527386.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:06.677Z,1520527386.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:07.062Z,1520527387.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:07.077Z,1520527387.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:07.462Z,1520527387.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:07.477Z,1520527387.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:07.866Z,1520527387.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:07.881Z,1520527387.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:08.266Z,1520527388.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:08.281Z,1520527388.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:08.647Z,1520527388.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:08.681Z,1520527388.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:09.066Z,1520527389.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:09.082Z,1520527389.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:09.466Z,1520527389.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:09.481Z,1520527389.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:09.860Z,1520527389.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:09.875Z,1520527389.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:10.262Z,1520527390.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:10.277Z,1520527390.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:10.666Z,1520527390.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:10.681Z,1520527390.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:11.060Z,1520527391.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:11.075Z,1520527391.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:11.466Z,1520527391.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:11.482Z,1520527391.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:11.863Z,1520527391.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:11.878Z,1520527391.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:12.262Z,1520527392.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:12.277Z,1520527392.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:12.666Z,1520527392.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:12.682Z,1520527392.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:13.061Z,1520527393.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:13.078Z,1520527393.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:13.465Z,1520527393.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:13.481Z,1520527393.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:13.866Z,1520527393.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:13.882Z,1520527393.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:14.271Z,1520527394.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:14.286Z,1520527394.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:14.642Z,1520527394.642 [NAL9602](INFO): NAL9602 initialized
2018-03-08T16:43:14.670Z,1520527394.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:14.687Z,1520527394.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:15.062Z,1520527395.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:15.077Z,1520527395.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:15.472Z,1520527395.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:15.495Z,1520527395.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:15.870Z,1520527395.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:15.885Z,1520527395.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:16.271Z,1520527396.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:16.287Z,1520527396.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:16.667Z,1520527396.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:16.682Z,1520527396.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:17.067Z,1520527397.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:17.082Z,1520527397.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:17.462Z,1520527397.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:17.478Z,1520527397.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:17.874Z,1520527397.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:17.889Z,1520527397.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:18.275Z,1520527398.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:18.291Z,1520527398.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:18.673Z,1520527398.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:18.689Z,1520527398.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:19.065Z,1520527399.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:19.080Z,1520527399.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:19.466Z,1520527399.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:19.486Z,1520527399.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:19.861Z,1520527399.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:19.881Z,1520527399.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:20.261Z,1520527400.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:20.288Z,1520527400.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:20.673Z,1520527400.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:20.688Z,1520527400.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:21.075Z,1520527401.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:21.091Z,1520527401.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:21.476Z,1520527401.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:21.491Z,1520527401.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:21.863Z,1520527401.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:21.878Z,1520527401.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:22.262Z,1520527402.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:22.282Z,1520527402.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:22.674Z,1520527402.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:22.689Z,1520527402.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:23.065Z,1520527403.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:23.093Z,1520527403.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:23.477Z,1520527403.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:23.585Z,1520527403.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:23.857Z,1520527403.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:23.872Z,1520527403.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:24.258Z,1520527404.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:24.274Z,1520527404.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:27.552Z,1520527407.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:27.568Z,1520527407.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:27.692Z,1520527407.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:27.727Z,1520527407.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:28.053Z,1520527408.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:28.068Z,1520527408.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:28.431Z,1520527408.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:28.459Z,1520527408.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:28.835Z,1520527408.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:28.863Z,1520527408.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:29.235Z,1520527409.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:29.261Z,1520527409.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:29.654Z,1520527409.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:29.670Z,1520527409.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:30.083Z,1520527410.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:30.111Z,1520527410.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:30.449Z,1520527410.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:30.470Z,1520527410.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:30.835Z,1520527410.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:30.862Z,1520527410.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:31.231Z,1520527411.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:31.263Z,1520527411.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:31.641Z,1520527411.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:31.667Z,1520527411.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:32.057Z,1520527412.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:32.073Z,1520527412.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:32.441Z,1520527412.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:32.479Z,1520527412.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:32.839Z,1520527412.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:32.867Z,1520527412.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:33.231Z,1520527413.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:33.247Z,1520527413.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:33.645Z,1520527413.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:33.671Z,1520527413.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:34.045Z,1520527414.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:34.071Z,1520527414.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:34.445Z,1520527414.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:34.472Z,1520527414.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:34.840Z,1520527414.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:34.875Z,1520527414.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:35.231Z,1520527415.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:35.245Z,1520527415.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:35.645Z,1520527415.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:35.681Z,1520527415.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:36.049Z,1520527416.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:36.085Z,1520527416.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:36.453Z,1520527416.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:36.483Z,1520527416.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:36.840Z,1520527416.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:36.856Z,1520527416.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:37.236Z,1520527417.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:37.260Z,1520527417.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:37.645Z,1520527417.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:37.660Z,1520527417.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:38.050Z,1520527418.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:38.065Z,1520527418.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:38.443Z,1520527418.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:38.466Z,1520527418.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:38.842Z,1520527418.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:38.856Z,1520527418.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:39.242Z,1520527419.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:39.257Z,1520527419.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:39.645Z,1520527419.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:39.661Z,1520527419.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:40.043Z,1520527420.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:40.058Z,1520527420.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:40.445Z,1520527420.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:40.461Z,1520527420.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:40.839Z,1520527420.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:40.858Z,1520527420.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:41.237Z,1520527421.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:41.252Z,1520527421.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:41.646Z,1520527421.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:41.661Z,1520527421.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:42.049Z,1520527422.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:42.065Z,1520527422.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:42.444Z,1520527422.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:42.459Z,1520527422.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:42.844Z,1520527422.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:42.859Z,1520527422.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:43.242Z,1520527423.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:43.257Z,1520527423.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:43.644Z,1520527423.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:43.666Z,1520527423.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:44.045Z,1520527424.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:44.061Z,1520527424.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:44.445Z,1520527424.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:44.461Z,1520527424.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:44.842Z,1520527424.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:44.857Z,1520527424.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:45.243Z,1520527425.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:45.258Z,1520527425.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:45.645Z,1520527425.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:45.661Z,1520527425.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:46.043Z,1520527426.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:46.062Z,1520527426.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:46.446Z,1520527426.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:46.461Z,1520527426.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:46.839Z,1520527426.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:46.854Z,1520527426.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:47.241Z,1520527427.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:47.255Z,1520527427.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:47.646Z,1520527427.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:47.667Z,1520527427.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:48.049Z,1520527428.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:48.065Z,1520527428.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:48.444Z,1520527428.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:48.466Z,1520527428.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:48.843Z,1520527428.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:48.859Z,1520527428.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:49.238Z,1520527429.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:49.257Z,1520527429.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:49.646Z,1520527429.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:49.661Z,1520527429.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:50.045Z,1520527430.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:50.061Z,1520527430.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:50.444Z,1520527430.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:50.459Z,1520527430.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:50.839Z,1520527430.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:50.853Z,1520527430.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:51.243Z,1520527431.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:51.258Z,1520527431.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:51.646Z,1520527431.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:51.661Z,1520527431.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:52.043Z,1520527432.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:52.062Z,1520527432.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:52.445Z,1520527432.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:52.461Z,1520527432.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:52.838Z,1520527432.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:52.857Z,1520527432.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:53.241Z,1520527433.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:53.256Z,1520527433.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:53.645Z,1520527433.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:53.661Z,1520527433.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:54.049Z,1520527434.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:54.065Z,1520527434.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:54.446Z,1520527434.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:54.461Z,1520527434.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:54.844Z,1520527434.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:54.866Z,1520527434.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:55.242Z,1520527435.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:55.263Z,1520527435.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:55.649Z,1520527435.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:55.664Z,1520527435.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:56.049Z,1520527436.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:56.070Z,1520527436.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:56.448Z,1520527436.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:56.463Z,1520527436.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:56.841Z,1520527436.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:56.868Z,1520527436.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:57.239Z,1520527437.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:57.270Z,1520527437.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:57.656Z,1520527437.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:57.679Z,1520527437.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:58.055Z,1520527438.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:58.078Z,1520527438.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:58.440Z,1520527438.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:58.475Z,1520527438.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:58.836Z,1520527438.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:58.867Z,1520527438.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:59.231Z,1520527439.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:59.277Z,1520527439.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:43:59.664Z,1520527439.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:43:59.692Z,1520527439.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:00.063Z,1520527440.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:00.092Z,1520527440.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:00.442Z,1520527440.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:00.458Z,1520527440.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:00.841Z,1520527440.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:00.871Z,1520527440.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:01.253Z,1520527441.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:01.294Z,1520527441.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:01.649Z,1520527441.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:01.670Z,1520527441.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:02.051Z,1520527442.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:02.067Z,1520527442.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:02.452Z,1520527442.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:02.468Z,1520527442.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:02.839Z,1520527442.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:02.854Z,1520527442.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:03.228Z,1520527443.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:03.259Z,1520527443.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:03.653Z,1520527443.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:03.668Z,1520527443.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:04.052Z,1520527444.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:04.068Z,1520527444.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:04.447Z,1520527444.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:04.468Z,1520527444.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:04.848Z,1520527444.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:04.870Z,1520527444.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:05.243Z,1520527445.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:05.258Z,1520527445.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:05.650Z,1520527445.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:05.666Z,1520527445.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:06.056Z,1520527446.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:06.123Z,1520527446.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:06.454Z,1520527446.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:06.468Z,1520527446.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:06.845Z,1520527446.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:06.861Z,1520527446.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:07.230Z,1520527447.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:07.263Z,1520527447.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:07.654Z,1520527447.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:07.674Z,1520527447.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:08.045Z,1520527448.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:08.061Z,1520527448.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:08.456Z,1520527448.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:08.472Z,1520527448.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:08.842Z,1520527448.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:08.858Z,1520527448.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:09.243Z,1520527449.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:09.258Z,1520527449.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:09.653Z,1520527449.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:09.668Z,1520527449.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:10.055Z,1520527450.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:10.070Z,1520527450.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:10.454Z,1520527450.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:10.469Z,1520527450.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:10.843Z,1520527450.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:10.858Z,1520527450.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:11.230Z,1520527451.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:11.256Z,1520527451.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:11.651Z,1520527451.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:11.666Z,1520527451.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:12.053Z,1520527452.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:12.068Z,1520527452.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:12.453Z,1520527452.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:12.468Z,1520527452.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:12.843Z,1520527452.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:12.859Z,1520527452.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:13.229Z,1520527453.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:13.262Z,1520527453.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:13.653Z,1520527453.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:13.668Z,1520527453.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:14.045Z,1520527454.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:14.061Z,1520527454.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:14.456Z,1520527454.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:14.472Z,1520527454.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:14.843Z,1520527454.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:14.858Z,1520527454.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:15.228Z,1520527455.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:15.259Z,1520527455.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:15.653Z,1520527455.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:15.669Z,1520527455.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:16.052Z,1520527456.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:16.067Z,1520527456.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:16.455Z,1520527456.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:16.470Z,1520527456.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:16.835Z,1520527456.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:16.861Z,1520527456.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:17.226Z,1520527457.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:17.257Z,1520527457.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:17.645Z,1520527457.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:17.664Z,1520527457.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:18.059Z,1520527458.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:18.109Z,1520527458.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:18.453Z,1520527458.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:18.468Z,1520527458.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:18.835Z,1520527458.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:18.862Z,1520527458.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:19.234Z,1520527459.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:19.261Z,1520527459.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:19.648Z,1520527459.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:19.664Z,1520527459.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:20.049Z,1520527460.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:20.065Z,1520527460.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:20.449Z,1520527460.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:20.467Z,1520527460.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:20.831Z,1520527460.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:20.856Z,1520527460.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:21.224Z,1520527461.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:21.248Z,1520527461.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:21.653Z,1520527461.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:21.669Z,1520527461.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:22.049Z,1520527462.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:22.064Z,1520527462.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:22.454Z,1520527462.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:22.469Z,1520527462.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:22.831Z,1520527462.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:22.863Z,1520527462.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:23.234Z,1520527463.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:23.266Z,1520527463.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:23.637Z,1520527463.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:23.666Z,1520527463.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:24.058Z,1520527464.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:24.073Z,1520527464.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:24.440Z,1520527464.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:24.469Z,1520527464.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:27.535Z,1520527467.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:27.568Z,1520527467.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:27.669Z,1520527467.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:27.708Z,1520527467.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:28.038Z,1520527468.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:28.066Z,1520527468.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:28.433Z,1520527468.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:28.448Z,1520527468.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:28.837Z,1520527468.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:28.869Z,1520527468.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:29.224Z,1520527469.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:29.239Z,1520527469.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:29.620Z,1520527469.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:29.635Z,1520527469.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:30.019Z,1520527470.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:30.038Z,1520527470.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:30.425Z,1520527470.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:30.440Z,1520527470.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:30.833Z,1520527470.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:30.848Z,1520527470.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:31.233Z,1520527471.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:31.248Z,1520527471.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:31.632Z,1520527471.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:31.654Z,1520527471.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:32.008Z,1520527472.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:32.040Z,1520527472.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:32.426Z,1520527472.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:32.446Z,1520527472.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:32.823Z,1520527472.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:32.838Z,1520527472.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:33.212Z,1520527473.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:33.243Z,1520527473.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:33.637Z,1520527473.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:33.658Z,1520527473.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:34.037Z,1520527474.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:34.052Z,1520527474.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:34.434Z,1520527474.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:34.450Z,1520527474.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:34.816Z,1520527474.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:34.847Z,1520527474.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:35.215Z,1520527475.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:35.240Z,1520527475.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:35.631Z,1520527475.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:35.651Z,1520527475.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:36.039Z,1520527476.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:36.055Z,1520527476.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:36.437Z,1520527476.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:36.452Z,1520527476.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:36.812Z,1520527476.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:36.843Z,1520527476.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:37.219Z,1520527477.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:37.246Z,1520527477.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:37.614Z,1520527477.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:37.641Z,1520527477.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:38.029Z,1520527478.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:38.057Z,1520527478.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:38.442Z,1520527478.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:38.457Z,1520527478.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:38.833Z,1520527478.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:38.851Z,1520527478.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:39.218Z,1520527479.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:39.245Z,1520527479.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:39.614Z,1520527479.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:39.647Z,1520527479.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:40.019Z,1520527480.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:40.049Z,1520527480.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:40.419Z,1520527480.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:40.451Z,1520527480.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:40.906Z,1520527480.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:40.922Z,1520527480.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:41.229Z,1520527481.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:41.255Z,1520527481.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:41.622Z,1520527481.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:41.664Z,1520527481.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:42.015Z,1520527482.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:42.030Z,1520527482.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:42.419Z,1520527482.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:42.462Z,1520527482.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:42.818Z,1520527482.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:42.833Z,1520527482.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:43.225Z,1520527483.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:43.241Z,1520527483.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:43.626Z,1520527483.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:43.642Z,1520527483.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:44.032Z,1520527484.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:44.059Z,1520527484.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:44.577Z,1520527484.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:44.716Z,1520527484.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:44.832Z,1520527484.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:44.879Z,1520527484.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:45.227Z,1520527485.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:45.243Z,1520527485.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:45.617Z,1520527485.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:45.640Z,1520527485.640 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:45.640Z,1520527485.640 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 180
2018-03-08T16:44:45.641Z,1520527485.641 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T16:44:45.642Z,1520527485.642 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:45.642Z,1520527485.642 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 180
2018-03-08T16:44:45.642Z,1520527485.642 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T16:44:45.644Z,1520527485.644 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:45.644Z,1520527485.644 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 180
2018-03-08T16:44:45.644Z,1520527485.644 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T16:44:45.657Z,1520527485.657 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T16:44:45.657Z,1520527485.657 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T16:44:45.657Z,1520527485.657 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T16:44:46.035Z,1520527486.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:46.061Z,1520527486.061 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T16:44:46.061Z,1520527486.061 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 180
2018-03-08T16:44:46.062Z,1520527486.062 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T16:44:46.062Z,1520527486.062 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 180
2018-03-08T16:44:46.062Z,1520527486.062 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T16:44:46.062Z,1520527486.062 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 180
2018-03-08T16:44:46.414Z,1520527486.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:46.556Z,1520527486.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T16:44:46.557Z,1520527486.557 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:44:46.557Z,1520527486.557 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:44:46.557Z,1520527486.557 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T16:44:46.558Z,1520527486.558 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:44:46.558Z,1520527486.558 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:44:46.558Z,1520527486.558 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T16:44:46.559Z,1520527486.559 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:44:46.559Z,1520527486.559 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:44:46.833Z,1520527486.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:46.848Z,1520527486.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T16:44:46.849Z,1520527486.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:47.238Z,1520527487.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:47.253Z,1520527487.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T16:44:47.254Z,1520527487.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:47.634Z,1520527487.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:47.654Z,1520527487.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T16:44:47.655Z,1520527487.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:48.012Z,1520527488.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:48.035Z,1520527488.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T16:44:48.036Z,1520527488.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:48.414Z,1520527488.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:48.449Z,1520527488.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T16:44:48.450Z,1520527488.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:48.819Z,1520527488.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:48.849Z,1520527488.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T16:44:48.850Z,1520527488.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:49.208Z,1520527489.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:49.223Z,1520527489.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T16:44:49.224Z,1520527489.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:49.625Z,1520527489.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:49.651Z,1520527489.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T16:44:49.652Z,1520527489.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:50.029Z,1520527490.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:50.063Z,1520527490.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T16:44:50.064Z,1520527490.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:50.429Z,1520527490.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:50.462Z,1520527490.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T16:44:50.463Z,1520527490.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:50.831Z,1520527490.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:50.857Z,1520527490.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T16:44:50.857Z,1520527490.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:51.214Z,1520527491.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:51.229Z,1520527491.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T16:44:51.230Z,1520527491.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:51.629Z,1520527491.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:51.655Z,1520527491.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T16:44:51.655Z,1520527491.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:52.046Z,1520527492.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:52.061Z,1520527492.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T16:44:52.062Z,1520527492.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:52.433Z,1520527492.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:52.466Z,1520527492.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T16:44:52.467Z,1520527492.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:52.812Z,1520527492.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:52.827Z,1520527492.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T16:44:52.828Z,1520527492.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:53.218Z,1520527493.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:53.233Z,1520527493.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T16:44:53.234Z,1520527493.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:53.618Z,1520527493.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:53.632Z,1520527493.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T16:44:53.633Z,1520527493.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:54.025Z,1520527494.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:54.057Z,1520527494.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T16:44:54.058Z,1520527494.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:54.437Z,1520527494.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:54.461Z,1520527494.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T16:44:54.462Z,1520527494.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:54.833Z,1520527494.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:54.864Z,1520527494.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T16:44:54.865Z,1520527494.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:55.214Z,1520527495.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:55.239Z,1520527495.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T16:44:55.240Z,1520527495.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:55.622Z,1520527495.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:55.637Z,1520527495.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T16:44:55.638Z,1520527495.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:56.023Z,1520527496.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:56.038Z,1520527496.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T16:44:56.039Z,1520527496.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:56.419Z,1520527496.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:56.434Z,1520527496.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T16:44:56.435Z,1520527496.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:56.833Z,1520527496.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:56.865Z,1520527496.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T16:44:56.866Z,1520527496.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:57.233Z,1520527497.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:57.247Z,1520527497.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T16:44:57.248Z,1520527497.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:57.621Z,1520527497.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:57.636Z,1520527497.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T16:44:57.637Z,1520527497.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:58.020Z,1520527498.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:58.038Z,1520527498.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T16:44:58.039Z,1520527498.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:58.423Z,1520527498.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:58.437Z,1520527498.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T16:44:58.438Z,1520527498.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:58.819Z,1520527498.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:58.835Z,1520527498.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T16:44:58.836Z,1520527498.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:59.222Z,1520527499.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:59.237Z,1520527499.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T16:44:59.238Z,1520527499.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:44:59.630Z,1520527499.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:44:59.650Z,1520527499.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T16:44:59.651Z,1520527499.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:00.023Z,1520527500.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:00.042Z,1520527500.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T16:45:00.043Z,1520527500.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:00.437Z,1520527500.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:00.452Z,1520527500.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T16:45:00.469Z,1520527500.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:00.829Z,1520527500.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:00.844Z,1520527500.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T16:45:00.845Z,1520527500.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:01.211Z,1520527501.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:01.242Z,1520527501.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T16:45:01.243Z,1520527501.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:01.623Z,1520527501.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:01.638Z,1520527501.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T16:45:01.639Z,1520527501.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:02.027Z,1520527502.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:02.042Z,1520527502.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T16:45:02.043Z,1520527502.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:02.426Z,1520527502.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:02.446Z,1520527502.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T16:45:02.447Z,1520527502.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:02.829Z,1520527502.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:02.845Z,1520527502.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T16:45:02.845Z,1520527502.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:03.229Z,1520527503.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:03.250Z,1520527503.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T16:45:03.251Z,1520527503.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:03.630Z,1520527503.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:03.645Z,1520527503.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T16:45:03.646Z,1520527503.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:04.026Z,1520527504.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:04.041Z,1520527504.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T16:45:04.042Z,1520527504.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:04.421Z,1520527504.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:04.441Z,1520527504.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T16:45:04.442Z,1520527504.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:04.819Z,1520527504.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:04.837Z,1520527504.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T16:45:04.838Z,1520527504.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:05.226Z,1520527505.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:05.241Z,1520527505.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T16:45:05.242Z,1520527505.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:05.617Z,1520527505.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:05.646Z,1520527505.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:06.032Z,1520527506.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:06.048Z,1520527506.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:06.436Z,1520527506.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:06.459Z,1520527506.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:06.837Z,1520527506.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:06.852Z,1520527506.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:07.212Z,1520527507.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:07.244Z,1520527507.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:07.625Z,1520527507.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:07.644Z,1520527507.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:08.015Z,1520527508.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:08.042Z,1520527508.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:08.414Z,1520527508.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:08.450Z,1520527508.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:08.836Z,1520527508.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:08.852Z,1520527508.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:09.241Z,1520527509.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:09.256Z,1520527509.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:09.637Z,1520527509.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:09.652Z,1520527509.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:10.014Z,1520527510.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:10.051Z,1520527510.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:10.418Z,1520527510.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:10.446Z,1520527510.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:10.815Z,1520527510.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:10.843Z,1520527510.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:11.215Z,1520527511.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:11.231Z,1520527511.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:11.629Z,1520527511.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:11.656Z,1520527511.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:12.044Z,1520527512.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:12.060Z,1520527512.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:12.425Z,1520527512.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:12.458Z,1520527512.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:12.824Z,1520527512.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:12.839Z,1520527512.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:13.217Z,1520527513.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:13.232Z,1520527513.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:13.633Z,1520527513.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:13.665Z,1520527513.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:14.041Z,1520527514.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:14.071Z,1520527514.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:14.434Z,1520527514.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:14.465Z,1520527514.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:14.822Z,1520527514.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:14.842Z,1520527514.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:15.221Z,1520527515.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:15.237Z,1520527515.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:15.617Z,1520527515.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:15.634Z,1520527515.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:16.029Z,1520527516.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:16.045Z,1520527516.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:16.429Z,1520527516.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:16.445Z,1520527516.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:16.837Z,1520527516.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:16.868Z,1520527516.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:17.222Z,1520527517.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:17.237Z,1520527517.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:17.624Z,1520527517.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:17.639Z,1520527517.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:18.024Z,1520527518.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:18.039Z,1520527518.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:18.416Z,1520527518.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:18.438Z,1520527518.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:18.837Z,1520527518.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:18.869Z,1520527518.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:19.237Z,1520527519.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:19.270Z,1520527519.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:19.625Z,1520527519.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:19.641Z,1520527519.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:20.024Z,1520527520.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:20.040Z,1520527520.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:20.423Z,1520527520.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:20.439Z,1520527520.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:20.824Z,1520527520.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:20.840Z,1520527520.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:21.223Z,1520527521.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:21.239Z,1520527521.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:21.637Z,1520527521.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:21.666Z,1520527521.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:22.038Z,1520527522.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:22.097Z,1520527522.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:22.437Z,1520527522.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:22.473Z,1520527522.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:22.824Z,1520527522.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:22.839Z,1520527522.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:23.221Z,1520527523.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:23.237Z,1520527523.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:23.637Z,1520527523.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:23.669Z,1520527523.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:24.033Z,1520527524.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:24.049Z,1520527524.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:24.429Z,1520527524.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:24.445Z,1520527524.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:24.828Z,1520527524.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:24.843Z,1520527524.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:27.925Z,1520527527.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:27.946Z,1520527527.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:28.067Z,1520527528.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:28.103Z,1520527528.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:28.445Z,1520527528.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:28.460Z,1520527528.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:28.835Z,1520527528.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:28.851Z,1520527528.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:29.234Z,1520527529.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:29.249Z,1520527529.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:29.633Z,1520527529.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:29.648Z,1520527529.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:30.031Z,1520527530.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:30.046Z,1520527530.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:30.430Z,1520527530.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:30.445Z,1520527530.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:30.837Z,1520527530.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:30.852Z,1520527530.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:31.237Z,1520527531.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:31.252Z,1520527531.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:31.636Z,1520527531.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:31.652Z,1520527531.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:32.027Z,1520527532.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:32.046Z,1520527532.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:32.430Z,1520527532.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:32.450Z,1520527532.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:32.828Z,1520527532.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:32.843Z,1520527532.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:33.227Z,1520527533.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:33.242Z,1520527533.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:33.635Z,1520527533.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:33.652Z,1520527533.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:34.035Z,1520527534.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:34.051Z,1520527534.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:34.437Z,1520527534.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:34.458Z,1520527534.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:34.831Z,1520527534.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:34.846Z,1520527534.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:35.229Z,1520527535.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:35.245Z,1520527535.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:35.637Z,1520527535.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:35.653Z,1520527535.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:36.034Z,1520527536.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:36.054Z,1520527536.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:36.436Z,1520527536.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:36.451Z,1520527536.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:36.832Z,1520527536.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:36.847Z,1520527536.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:37.230Z,1520527537.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:37.250Z,1520527537.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:37.635Z,1520527537.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:37.651Z,1520527537.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:38.037Z,1520527538.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:38.052Z,1520527538.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:38.434Z,1520527538.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:38.458Z,1520527538.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:38.830Z,1520527538.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:38.846Z,1520527538.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:39.228Z,1520527539.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:39.243Z,1520527539.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:39.631Z,1520527539.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:39.651Z,1520527539.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:40.039Z,1520527540.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:40.055Z,1520527540.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:40.441Z,1520527540.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:40.456Z,1520527540.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:40.831Z,1520527540.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:40.846Z,1520527540.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:41.227Z,1520527541.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:41.242Z,1520527541.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:41.637Z,1520527541.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:41.658Z,1520527541.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:42.040Z,1520527542.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:42.055Z,1520527542.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:42.440Z,1520527542.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:42.455Z,1520527542.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:42.832Z,1520527542.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:42.847Z,1520527542.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:43.230Z,1520527543.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:43.250Z,1520527543.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:43.640Z,1520527543.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:43.656Z,1520527543.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:44.041Z,1520527544.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:44.056Z,1520527544.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:44.440Z,1520527544.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:44.455Z,1520527544.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:44.830Z,1520527544.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:44.846Z,1520527544.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:45.221Z,1520527545.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:45.253Z,1520527545.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:45.640Z,1520527545.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:45.656Z,1520527545.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:46.038Z,1520527546.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:46.053Z,1520527546.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:46.438Z,1520527546.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:46.453Z,1520527546.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:46.819Z,1520527546.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:46.845Z,1520527546.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:47.218Z,1520527547.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:47.245Z,1520527547.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:47.638Z,1520527547.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:47.653Z,1520527547.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:48.044Z,1520527548.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:48.059Z,1520527548.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:48.441Z,1520527548.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:48.456Z,1520527548.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:48.819Z,1520527548.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:48.851Z,1520527548.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:49.222Z,1520527549.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:49.248Z,1520527549.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:49.636Z,1520527549.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:49.652Z,1520527549.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:50.041Z,1520527550.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:50.058Z,1520527550.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:50.441Z,1520527550.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:50.457Z,1520527550.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:50.823Z,1520527550.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:50.851Z,1520527550.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:51.219Z,1520527551.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:51.246Z,1520527551.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:51.637Z,1520527551.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:51.653Z,1520527551.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:52.041Z,1520527552.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:52.057Z,1520527552.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:52.438Z,1520527552.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:52.454Z,1520527552.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:52.820Z,1520527552.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:52.848Z,1520527552.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:53.218Z,1520527553.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:53.247Z,1520527553.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:53.646Z,1520527553.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:53.667Z,1520527553.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:54.046Z,1520527554.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:54.061Z,1520527554.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:54.424Z,1520527554.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:54.461Z,1520527554.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:54.823Z,1520527554.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:54.851Z,1520527554.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:55.214Z,1520527555.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:55.251Z,1520527555.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:55.646Z,1520527555.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:55.661Z,1520527555.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:56.045Z,1520527556.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:56.066Z,1520527556.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:56.441Z,1520527556.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:56.457Z,1520527556.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:56.819Z,1520527556.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:56.847Z,1520527556.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:57.220Z,1520527557.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:57.275Z,1520527557.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:57.630Z,1520527557.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:57.657Z,1520527557.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:58.043Z,1520527558.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:58.067Z,1520527558.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:58.432Z,1520527558.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:58.466Z,1520527558.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:58.821Z,1520527558.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:58.859Z,1520527558.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:59.218Z,1520527559.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:59.234Z,1520527559.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:45:59.638Z,1520527559.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:45:59.661Z,1520527559.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:00.071Z,1520527560.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:00.091Z,1520527560.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:00.440Z,1520527560.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:00.490Z,1520527560.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:00.828Z,1520527560.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:00.869Z,1520527560.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:01.223Z,1520527561.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:01.239Z,1520527561.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:01.641Z,1520527561.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:01.665Z,1520527561.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:02.037Z,1520527562.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:02.067Z,1520527562.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:02.437Z,1520527562.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:02.468Z,1520527562.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:02.825Z,1520527562.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:02.841Z,1520527562.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:03.227Z,1520527563.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:03.242Z,1520527563.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:03.629Z,1520527563.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:03.645Z,1520527563.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:04.041Z,1520527564.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:04.063Z,1520527564.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:04.433Z,1520527564.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:04.448Z,1520527564.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:04.828Z,1520527564.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:04.843Z,1520527564.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:05.223Z,1520527565.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:05.239Z,1520527565.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:05.632Z,1520527565.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:05.647Z,1520527565.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:06.041Z,1520527566.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:06.071Z,1520527566.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:06.433Z,1520527566.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:06.448Z,1520527566.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:06.827Z,1520527566.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:06.841Z,1520527566.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:07.225Z,1520527567.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:07.244Z,1520527567.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:07.641Z,1520527567.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:07.671Z,1520527567.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:08.033Z,1520527568.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:08.047Z,1520527568.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:08.429Z,1520527568.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:08.445Z,1520527568.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:08.827Z,1520527568.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:08.843Z,1520527568.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:09.226Z,1520527569.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:09.242Z,1520527569.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:09.641Z,1520527569.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:09.671Z,1520527569.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:10.032Z,1520527570.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:10.047Z,1520527570.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:10.445Z,1520527570.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:10.474Z,1520527570.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:10.828Z,1520527570.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:10.843Z,1520527570.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:11.227Z,1520527571.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:11.242Z,1520527571.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:11.641Z,1520527571.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:11.671Z,1520527571.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:12.033Z,1520527572.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:12.048Z,1520527572.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:12.441Z,1520527572.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:12.472Z,1520527572.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:12.826Z,1520527572.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:12.851Z,1520527572.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:13.227Z,1520527573.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:13.243Z,1520527573.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:13.641Z,1520527573.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:13.677Z,1520527573.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:14.041Z,1520527574.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:14.075Z,1520527574.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:14.441Z,1520527574.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:14.477Z,1520527574.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:14.828Z,1520527574.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:14.843Z,1520527574.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:15.227Z,1520527575.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:15.242Z,1520527575.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:15.642Z,1520527575.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:15.677Z,1520527575.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:16.033Z,1520527576.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:16.049Z,1520527576.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:16.429Z,1520527576.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:16.450Z,1520527576.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:16.828Z,1520527576.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:16.843Z,1520527576.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:17.227Z,1520527577.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:17.242Z,1520527577.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:17.641Z,1520527577.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:17.656Z,1520527577.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:18.033Z,1520527578.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:18.048Z,1520527578.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:18.440Z,1520527578.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:18.455Z,1520527578.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:18.832Z,1520527578.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:18.847Z,1520527578.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:19.230Z,1520527579.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:19.245Z,1520527579.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:19.632Z,1520527579.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:19.647Z,1520527579.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:20.033Z,1520527580.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:20.047Z,1520527580.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:20.433Z,1520527580.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:20.449Z,1520527580.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:20.830Z,1520527580.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:20.846Z,1520527580.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:21.230Z,1520527581.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:21.245Z,1520527581.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:21.633Z,1520527581.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:21.649Z,1520527581.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:22.033Z,1520527582.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:22.048Z,1520527582.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:22.432Z,1520527582.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:22.447Z,1520527582.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:22.830Z,1520527582.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:22.845Z,1520527582.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:23.230Z,1520527583.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:23.245Z,1520527583.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:23.628Z,1520527583.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:23.643Z,1520527583.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:24.033Z,1520527584.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:24.049Z,1520527584.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:24.437Z,1520527584.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:24.452Z,1520527584.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:24.832Z,1520527584.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:24.847Z,1520527584.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:27.928Z,1520527587.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:27.943Z,1520527587.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:28.044Z,1520527588.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:28.082Z,1520527588.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:28.410Z,1520527588.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:28.443Z,1520527588.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:28.801Z,1520527588.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:28.831Z,1520527588.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:29.210Z,1520527589.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:29.234Z,1520527589.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:29.595Z,1520527589.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:29.615Z,1520527589.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:29.996Z,1520527589.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:30.012Z,1520527590.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:30.400Z,1520527590.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:30.416Z,1520527590.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:30.802Z,1520527590.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:30.819Z,1520527590.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:31.209Z,1520527591.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:31.225Z,1520527591.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:31.620Z,1520527591.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:31.649Z,1520527591.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:31.990Z,1520527591.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:32.031Z,1520527592.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:32.394Z,1520527592.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:32.409Z,1520527592.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:32.795Z,1520527592.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:32.810Z,1520527592.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:33.199Z,1520527593.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:33.215Z,1520527593.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:33.595Z,1520527593.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:33.610Z,1520527593.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:34.013Z,1520527594.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:34.037Z,1520527594.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:34.409Z,1520527594.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:34.440Z,1520527594.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:34.809Z,1520527594.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:34.843Z,1520527594.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:35.200Z,1520527595.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:35.215Z,1520527595.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:35.600Z,1520527595.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:35.622Z,1520527595.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:36.000Z,1520527596.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:36.015Z,1520527596.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:36.399Z,1520527596.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:36.415Z,1520527596.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:36.814Z,1520527596.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:36.845Z,1520527596.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:37.209Z,1520527597.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:37.224Z,1520527597.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:37.604Z,1520527597.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:37.619Z,1520527597.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:38.003Z,1520527598.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:38.018Z,1520527598.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:38.399Z,1520527598.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:38.414Z,1520527598.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:38.803Z,1520527598.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:38.818Z,1520527598.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:39.199Z,1520527599.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:39.214Z,1520527599.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:39.602Z,1520527599.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:39.617Z,1520527599.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:40.005Z,1520527600.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:40.021Z,1520527600.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:40.405Z,1520527600.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:40.421Z,1520527600.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:40.805Z,1520527600.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:40.820Z,1520527600.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:41.192Z,1520527601.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:41.220Z,1520527601.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:41.602Z,1520527601.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:41.623Z,1520527601.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:42.003Z,1520527602.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:42.018Z,1520527602.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:42.402Z,1520527602.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:42.422Z,1520527602.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:42.809Z,1520527602.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:42.824Z,1520527602.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:43.208Z,1520527603.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:43.223Z,1520527603.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:43.608Z,1520527603.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:43.624Z,1520527603.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:44.002Z,1520527604.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:44.022Z,1520527604.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:44.403Z,1520527604.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:44.418Z,1520527604.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:44.803Z,1520527604.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:44.819Z,1520527604.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:45.203Z,1520527605.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:45.218Z,1520527605.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:45.603Z,1520527605.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:45.618Z,1520527605.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:46.008Z,1520527606.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:46.030Z,1520527606.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:46.407Z,1520527606.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:46.423Z,1520527606.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:46.808Z,1520527606.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:46.823Z,1520527606.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:47.208Z,1520527607.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:47.223Z,1520527607.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:47.603Z,1520527607.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:47.619Z,1520527607.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:48.003Z,1520527608.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:48.018Z,1520527608.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:48.399Z,1520527608.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:48.415Z,1520527608.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:48.808Z,1520527608.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:48.823Z,1520527608.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:49.209Z,1520527609.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:49.224Z,1520527609.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:49.609Z,1520527609.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:49.624Z,1520527609.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:49.998Z,1520527609.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:50.013Z,1520527610.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:50.399Z,1520527610.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:50.414Z,1520527610.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:50.803Z,1520527610.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:50.819Z,1520527610.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:51.203Z,1520527611.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:51.218Z,1520527611.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:51.603Z,1520527611.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:51.618Z,1520527611.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:52.008Z,1520527612.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:52.030Z,1520527612.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:52.408Z,1520527612.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:52.423Z,1520527612.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:52.808Z,1520527612.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:52.823Z,1520527612.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:53.202Z,1520527613.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:53.222Z,1520527613.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:53.602Z,1520527613.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:53.622Z,1520527613.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:54.003Z,1520527614.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:54.018Z,1520527614.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:54.399Z,1520527614.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:54.415Z,1520527614.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:54.807Z,1520527614.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:54.830Z,1520527614.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:55.208Z,1520527615.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:55.223Z,1520527615.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:55.608Z,1520527615.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:55.630Z,1520527615.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:56.002Z,1520527616.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:56.022Z,1520527616.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:56.403Z,1520527616.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:56.418Z,1520527616.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:56.803Z,1520527616.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:56.819Z,1520527616.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:57.203Z,1520527617.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:57.226Z,1520527617.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:57.603Z,1520527617.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:57.617Z,1520527617.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:58.006Z,1520527618.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:58.026Z,1520527618.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:58.409Z,1520527618.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:58.425Z,1520527618.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:58.808Z,1520527618.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:58.823Z,1520527618.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:59.204Z,1520527619.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:59.219Z,1520527619.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:59.602Z,1520527619.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:46:59.618Z,1520527619.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:46:59.996Z,1520527619.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:00.018Z,1520527620.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:00.402Z,1520527620.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:00.423Z,1520527620.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:00.808Z,1520527620.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:00.823Z,1520527620.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:01.209Z,1520527621.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:01.230Z,1520527621.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:01.608Z,1520527621.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:01.623Z,1520527621.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:02.003Z,1520527622.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:02.018Z,1520527622.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:02.399Z,1520527622.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:02.414Z,1520527622.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:02.803Z,1520527622.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:02.818Z,1520527622.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:03.203Z,1520527623.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:03.218Z,1520527623.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:03.604Z,1520527623.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:03.618Z,1520527623.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:04.009Z,1520527624.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:04.025Z,1520527624.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:04.409Z,1520527624.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:04.425Z,1520527624.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:04.810Z,1520527624.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:04.825Z,1520527624.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:05.203Z,1520527625.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:05.219Z,1520527625.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:05.603Z,1520527625.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:05.618Z,1520527625.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:06.002Z,1520527626.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:06.017Z,1520527626.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:06.395Z,1520527626.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:06.422Z,1520527626.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:06.813Z,1520527626.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:06.834Z,1520527626.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:07.214Z,1520527627.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:07.234Z,1520527627.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:07.613Z,1520527627.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:07.628Z,1520527627.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:07.990Z,1520527627.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:08.026Z,1520527628.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:08.406Z,1520527628.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:08.421Z,1520527628.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:08.789Z,1520527628.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:08.817Z,1520527628.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:09.191Z,1520527629.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:09.224Z,1520527629.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:09.594Z,1520527629.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:09.622Z,1520527629.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:10.009Z,1520527630.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:10.031Z,1520527630.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:10.413Z,1520527630.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:10.434Z,1520527630.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:10.815Z,1520527630.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:10.831Z,1520527630.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:11.189Z,1520527631.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:11.216Z,1520527631.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:11.595Z,1520527631.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:11.622Z,1520527631.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:11.988Z,1520527631.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:12.022Z,1520527632.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:12.395Z,1520527632.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:12.422Z,1520527632.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:12.810Z,1520527632.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:12.825Z,1520527632.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:13.210Z,1520527633.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:13.225Z,1520527633.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:13.618Z,1520527633.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:13.664Z,1520527633.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:13.990Z,1520527633.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:14.023Z,1520527634.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:14.394Z,1520527634.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:14.427Z,1520527634.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:14.784Z,1520527634.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:14.799Z,1520527634.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:15.195Z,1520527635.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:15.231Z,1520527635.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:15.590Z,1520527635.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:15.606Z,1520527635.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:16.001Z,1520527636.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:16.033Z,1520527636.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:16.415Z,1520527636.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:16.451Z,1520527636.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:16.807Z,1520527636.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:16.863Z,1520527636.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:17.197Z,1520527637.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:17.237Z,1520527637.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:17.607Z,1520527637.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:17.623Z,1520527637.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:18.002Z,1520527638.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:18.018Z,1520527638.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:18.403Z,1520527638.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:18.418Z,1520527638.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:18.806Z,1520527638.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:18.821Z,1520527638.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:19.205Z,1520527639.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:19.226Z,1520527639.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:19.603Z,1520527639.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:19.622Z,1520527639.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:20.002Z,1520527640.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:20.018Z,1520527640.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:20.400Z,1520527640.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:20.415Z,1520527640.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:20.798Z,1520527640.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:20.852Z,1520527640.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:21.202Z,1520527641.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:21.223Z,1520527641.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:21.602Z,1520527641.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:21.617Z,1520527641.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:22.004Z,1520527642.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:22.020Z,1520527642.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:22.405Z,1520527642.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:22.421Z,1520527642.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:22.805Z,1520527642.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:22.820Z,1520527642.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:23.196Z,1520527643.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:23.212Z,1520527643.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:23.598Z,1520527643.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:23.613Z,1520527643.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:23.995Z,1520527643.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:24.018Z,1520527644.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:24.020Z,1520527644.020 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T16:47:24.021Z,1520527644.021 [Default:CheckIn:C.Wait] Stopped
2018-03-08T16:47:24.021Z,1520527644.021 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T16:47:24.021Z,1520527644.021 [Default:CheckIn:D] Running Loop=1
2018-03-08T16:47:24.402Z,1520527644.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:24.418Z,1520527644.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:24.421Z,1520527644.421 [Default:CheckIn:D] Stopped
2018-03-08T16:47:24.421Z,1520527644.421 [Default:CheckIn:E] Running Loop=1
2018-03-08T16:47:24.805Z,1520527644.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:24.821Z,1520527644.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:24.824Z,1520527644.824 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 541.660254 min 
2018-03-08T16:47:24.825Z,1520527644.825 [Default:CheckIn:E] Stopped
2018-03-08T16:47:24.825Z,1520527644.825 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T16:47:24.825Z,1520527644.825 [Default:CheckIn] Stopped
2018-03-08T16:47:24.825Z,1520527644.825 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T16:47:24.825Z,1520527644.825 [Default:CheckIn](INFO): Running loop #53
2018-03-08T16:47:24.825Z,1520527644.825 [Default:CheckIn] Running Loop=53
2018-03-08T16:47:24.825Z,1520527644.825 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T16:47:24.825Z,1520527644.825 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T16:47:25.208Z,1520527645.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:25.223Z,1520527645.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:28.356Z,1520527648.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:28.372Z,1520527648.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:28.468Z,1520527648.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:28.511Z,1520527648.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:28.852Z,1520527648.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:28.868Z,1520527648.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:29.245Z,1520527649.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:29.265Z,1520527649.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:29.659Z,1520527649.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:29.682Z,1520527649.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:30.061Z,1520527650.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:30.076Z,1520527650.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:30.460Z,1520527650.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:30.475Z,1520527650.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:30.839Z,1520527650.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:30.865Z,1520527650.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:31.238Z,1520527651.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:31.270Z,1520527651.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:31.661Z,1520527651.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:31.676Z,1520527651.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:32.063Z,1520527652.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:32.086Z,1520527652.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:32.457Z,1520527652.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:32.478Z,1520527652.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:32.837Z,1520527652.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:32.863Z,1520527652.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:33.238Z,1520527653.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:33.271Z,1520527653.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:33.661Z,1520527653.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:33.676Z,1520527653.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:34.051Z,1520527654.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:34.078Z,1520527654.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:34.461Z,1520527654.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:34.476Z,1520527654.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:34.860Z,1520527654.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:34.874Z,1520527654.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:35.236Z,1520527655.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:35.270Z,1520527655.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:35.657Z,1520527655.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:35.673Z,1520527655.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:36.062Z,1520527656.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:36.082Z,1520527656.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:36.461Z,1520527656.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:36.476Z,1520527656.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:36.839Z,1520527656.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:36.865Z,1520527656.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:37.238Z,1520527657.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:37.265Z,1520527657.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:37.656Z,1520527657.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:37.671Z,1520527657.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:38.062Z,1520527658.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:38.077Z,1520527658.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:38.458Z,1520527658.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:38.478Z,1520527658.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:38.843Z,1520527658.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:38.870Z,1520527658.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:39.238Z,1520527659.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:39.264Z,1520527659.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:39.656Z,1520527659.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:39.679Z,1520527659.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:40.055Z,1520527660.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:40.074Z,1520527660.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:40.457Z,1520527660.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:40.472Z,1520527660.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:40.840Z,1520527660.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:40.887Z,1520527660.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:41.232Z,1520527661.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:41.255Z,1520527661.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:41.661Z,1520527661.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:41.676Z,1520527661.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:42.059Z,1520527662.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:42.080Z,1520527662.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:42.461Z,1520527662.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:42.476Z,1520527662.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:42.839Z,1520527662.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:42.878Z,1520527662.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:43.242Z,1520527663.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:43.274Z,1520527663.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:43.649Z,1520527663.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:43.676Z,1520527663.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:44.061Z,1520527664.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:44.077Z,1520527664.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:44.450Z,1520527664.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:44.477Z,1520527664.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:44.839Z,1520527664.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:44.895Z,1520527664.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:45.245Z,1520527665.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:45.293Z,1520527665.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:45.667Z,1520527665.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:45.705Z,1520527665.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:46.055Z,1520527666.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:46.079Z,1520527666.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:46.456Z,1520527666.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:46.472Z,1520527666.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:46.852Z,1520527666.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:46.867Z,1520527666.867 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:46.867Z,1520527666.867 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 181
2018-03-08T16:47:46.867Z,1520527666.867 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T16:47:46.869Z,1520527666.869 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:46.869Z,1520527666.869 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 181
2018-03-08T16:47:46.869Z,1520527666.869 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T16:47:46.871Z,1520527666.871 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:46.871Z,1520527666.871 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 181
2018-03-08T16:47:46.871Z,1520527666.871 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T16:47:46.883Z,1520527666.883 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T16:47:46.883Z,1520527666.883 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T16:47:46.884Z,1520527666.884 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T16:47:47.239Z,1520527667.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:47.277Z,1520527667.277 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T16:47:47.277Z,1520527667.277 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 181
2018-03-08T16:47:47.278Z,1520527667.278 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T16:47:47.278Z,1520527667.278 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 181
2018-03-08T16:47:47.278Z,1520527667.278 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T16:47:47.278Z,1520527667.278 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 181
2018-03-08T16:47:47.655Z,1520527667.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:47.671Z,1520527667.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T16:47:47.671Z,1520527667.671 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:47:47.672Z,1520527667.672 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:47:47.672Z,1520527667.672 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T16:47:47.673Z,1520527667.673 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:47:47.673Z,1520527667.673 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:47:47.673Z,1520527667.673 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T16:47:47.674Z,1520527667.674 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:47:47.674Z,1520527667.674 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:47:48.063Z,1520527668.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:48.091Z,1520527668.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T16:47:48.092Z,1520527668.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:48.450Z,1520527668.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:48.475Z,1520527668.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T16:47:48.476Z,1520527668.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:48.841Z,1520527668.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:48.872Z,1520527668.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T16:47:48.877Z,1520527668.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:49.243Z,1520527669.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:49.270Z,1520527669.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T16:47:49.271Z,1520527669.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:49.653Z,1520527669.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:49.681Z,1520527669.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T16:47:49.682Z,1520527669.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:50.070Z,1520527670.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:50.085Z,1520527670.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T16:47:50.086Z,1520527670.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:50.470Z,1520527670.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:50.485Z,1520527670.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T16:47:50.486Z,1520527670.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:50.840Z,1520527670.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:50.855Z,1520527670.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T16:47:50.856Z,1520527670.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:51.247Z,1520527671.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:51.282Z,1520527671.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T16:47:51.283Z,1520527671.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:51.657Z,1520527671.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:51.688Z,1520527671.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T16:47:51.693Z,1520527671.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:52.057Z,1520527672.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:52.072Z,1520527672.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T16:47:52.089Z,1520527672.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:52.451Z,1520527672.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:52.466Z,1520527672.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T16:47:52.467Z,1520527672.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:52.846Z,1520527672.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:52.866Z,1520527672.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T16:47:52.867Z,1520527672.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:53.248Z,1520527673.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:53.264Z,1520527673.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T16:47:53.265Z,1520527673.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:53.649Z,1520527673.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:53.665Z,1520527673.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T16:47:53.666Z,1520527673.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:54.087Z,1520527674.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:54.110Z,1520527674.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T16:47:54.111Z,1520527674.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:54.451Z,1520527674.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:54.513Z,1520527674.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T16:47:54.514Z,1520527674.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:54.848Z,1520527674.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:54.863Z,1520527674.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T16:47:54.864Z,1520527674.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:55.250Z,1520527675.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:55.265Z,1520527675.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T16:47:55.266Z,1520527675.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:55.648Z,1520527675.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:55.663Z,1520527675.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T16:47:55.664Z,1520527675.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:56.048Z,1520527676.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:56.063Z,1520527676.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T16:47:56.065Z,1520527676.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:56.450Z,1520527676.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:56.465Z,1520527676.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T16:47:56.466Z,1520527676.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:56.848Z,1520527676.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:56.870Z,1520527676.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T16:47:56.871Z,1520527676.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:57.245Z,1520527677.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:57.267Z,1520527677.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T16:47:57.269Z,1520527677.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:57.652Z,1520527677.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:57.668Z,1520527677.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T16:47:57.669Z,1520527677.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:58.052Z,1520527678.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:58.067Z,1520527678.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T16:47:58.068Z,1520527678.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:58.451Z,1520527678.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:58.467Z,1520527678.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T16:47:58.468Z,1520527678.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:58.845Z,1520527678.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:58.873Z,1520527678.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T16:47:58.874Z,1520527678.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:59.237Z,1520527679.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:59.261Z,1520527679.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T16:47:59.262Z,1520527679.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:47:59.655Z,1520527679.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:47:59.671Z,1520527679.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T16:47:59.672Z,1520527679.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:00.057Z,1520527680.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:00.072Z,1520527680.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T16:48:00.073Z,1520527680.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:00.456Z,1520527680.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:00.470Z,1520527680.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T16:48:00.471Z,1520527680.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:00.847Z,1520527680.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:00.862Z,1520527680.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T16:48:00.863Z,1520527680.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:01.245Z,1520527681.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:01.265Z,1520527681.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T16:48:01.266Z,1520527681.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:01.652Z,1520527681.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:01.667Z,1520527681.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T16:48:01.668Z,1520527681.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:02.056Z,1520527682.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:02.071Z,1520527682.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T16:48:02.072Z,1520527682.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:02.457Z,1520527682.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:02.472Z,1520527682.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T16:48:02.473Z,1520527682.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:02.841Z,1520527682.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:02.861Z,1520527682.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T16:48:02.862Z,1520527682.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:03.243Z,1520527683.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:03.258Z,1520527683.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T16:48:03.259Z,1520527683.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:03.656Z,1520527683.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:03.671Z,1520527683.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T16:48:03.673Z,1520527683.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:04.058Z,1520527684.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:04.085Z,1520527684.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T16:48:04.086Z,1520527684.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:04.461Z,1520527684.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:04.476Z,1520527684.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T16:48:04.477Z,1520527684.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:04.840Z,1520527684.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:04.867Z,1520527684.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T16:48:04.868Z,1520527684.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:05.234Z,1520527685.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:05.260Z,1520527685.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T16:48:05.261Z,1520527685.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:05.656Z,1520527685.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:05.671Z,1520527685.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T16:48:05.673Z,1520527685.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:06.061Z,1520527686.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:06.076Z,1520527686.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T16:48:06.077Z,1520527686.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:06.453Z,1520527686.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:06.468Z,1520527686.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T16:48:06.469Z,1520527686.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:06.840Z,1520527686.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:06.866Z,1520527686.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T16:48:06.867Z,1520527686.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:07.239Z,1520527687.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:07.275Z,1520527687.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:07.661Z,1520527687.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:07.676Z,1520527687.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:08.056Z,1520527688.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:08.072Z,1520527688.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:08.458Z,1520527688.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:08.473Z,1520527688.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:08.839Z,1520527688.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:08.875Z,1520527688.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:09.250Z,1520527689.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:09.265Z,1520527689.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:09.661Z,1520527689.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:09.677Z,1520527689.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:10.063Z,1520527690.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:10.082Z,1520527690.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:10.460Z,1520527690.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:10.476Z,1520527690.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:10.839Z,1520527690.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:10.875Z,1520527690.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:11.251Z,1520527691.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:11.266Z,1520527691.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:11.658Z,1520527691.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:11.673Z,1520527691.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:12.061Z,1520527692.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:12.076Z,1520527692.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:12.453Z,1520527692.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:12.468Z,1520527692.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:12.835Z,1520527692.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:12.866Z,1520527692.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:13.239Z,1520527693.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:13.271Z,1520527693.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:13.657Z,1520527693.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:13.676Z,1520527693.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:14.063Z,1520527694.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:14.079Z,1520527694.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:14.461Z,1520527694.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:14.477Z,1520527694.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:14.839Z,1520527694.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:14.871Z,1520527694.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:15.242Z,1520527695.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:15.268Z,1520527695.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:15.662Z,1520527695.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:15.682Z,1520527695.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:16.064Z,1520527696.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:16.080Z,1520527696.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:16.465Z,1520527696.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:16.480Z,1520527696.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:16.839Z,1520527696.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:16.866Z,1520527696.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:17.238Z,1520527697.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:17.275Z,1520527697.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:17.657Z,1520527697.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:17.679Z,1520527697.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:18.057Z,1520527698.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:18.084Z,1520527698.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:18.450Z,1520527698.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:18.482Z,1520527698.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:18.839Z,1520527698.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:18.854Z,1520527698.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:19.244Z,1520527699.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:19.303Z,1520527699.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:19.649Z,1520527699.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:19.665Z,1520527699.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:20.049Z,1520527700.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:20.064Z,1520527700.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:20.466Z,1520527700.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:20.497Z,1520527700.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:20.846Z,1520527700.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:20.861Z,1520527700.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:21.247Z,1520527701.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:21.263Z,1520527701.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:21.661Z,1520527701.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:21.693Z,1520527701.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:22.061Z,1520527702.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:22.076Z,1520527702.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:22.453Z,1520527702.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:22.469Z,1520527702.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:22.838Z,1520527702.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:22.865Z,1520527702.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:23.234Z,1520527703.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:23.265Z,1520527703.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:23.660Z,1520527703.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:23.675Z,1520527703.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:24.061Z,1520527704.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:24.077Z,1520527704.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:24.445Z,1520527704.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:24.478Z,1520527704.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:24.839Z,1520527704.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:24.870Z,1520527704.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:25.261Z,1520527705.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:25.276Z,1520527705.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:29.417Z,1520527709.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:29.444Z,1520527709.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:29.562Z,1520527709.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:29.598Z,1520527709.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:29.929Z,1520527709.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:29.945Z,1520527709.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:30.328Z,1520527710.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:30.344Z,1520527710.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:30.725Z,1520527710.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:30.740Z,1520527710.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:31.124Z,1520527711.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:31.139Z,1520527711.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:31.526Z,1520527711.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:31.541Z,1520527711.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:31.927Z,1520527711.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:31.943Z,1520527711.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:32.332Z,1520527712.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:32.372Z,1520527712.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:32.729Z,1520527712.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:32.745Z,1520527712.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:33.125Z,1520527713.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:33.141Z,1520527713.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:33.522Z,1520527713.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:33.537Z,1520527713.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:33.926Z,1520527713.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:33.941Z,1520527713.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:34.325Z,1520527714.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:34.340Z,1520527714.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:34.728Z,1520527714.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:34.743Z,1520527714.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:35.134Z,1520527715.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:35.170Z,1520527715.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:35.529Z,1520527715.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:35.544Z,1520527715.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:35.923Z,1520527715.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:35.938Z,1520527715.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:36.326Z,1520527716.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:36.341Z,1520527716.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:36.725Z,1520527716.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:36.740Z,1520527716.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:37.115Z,1520527717.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:37.151Z,1520527717.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:37.518Z,1520527717.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:37.550Z,1520527717.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:37.938Z,1520527717.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:37.953Z,1520527717.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:38.328Z,1520527718.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:38.358Z,1520527718.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:38.737Z,1520527718.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:38.752Z,1520527718.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:39.114Z,1520527719.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:39.145Z,1520527719.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:39.518Z,1520527719.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:39.557Z,1520527719.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:39.918Z,1520527719.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:39.949Z,1520527719.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:40.318Z,1520527720.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:40.333Z,1520527720.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:40.729Z,1520527720.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:40.761Z,1520527720.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:41.129Z,1520527721.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:41.160Z,1520527721.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:41.532Z,1520527721.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:41.563Z,1520527721.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:41.919Z,1520527721.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:41.948Z,1520527721.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:42.319Z,1520527722.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:42.335Z,1520527722.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:42.723Z,1520527722.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:42.739Z,1520527722.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:43.124Z,1520527723.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:43.138Z,1520527723.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:43.520Z,1520527723.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:43.535Z,1520527723.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:43.937Z,1520527723.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:43.968Z,1520527723.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:44.333Z,1520527724.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:44.364Z,1520527724.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:44.733Z,1520527724.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:44.765Z,1520527724.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:45.123Z,1520527725.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:45.138Z,1520527725.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:45.523Z,1520527725.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:45.538Z,1520527725.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:45.921Z,1520527725.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:45.937Z,1520527725.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:46.323Z,1520527726.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:46.338Z,1520527726.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:46.725Z,1520527726.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:46.741Z,1520527726.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:47.137Z,1520527727.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:47.152Z,1520527727.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:47.529Z,1520527727.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:47.544Z,1520527727.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:47.923Z,1520527727.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:47.938Z,1520527727.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:48.326Z,1520527728.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:48.341Z,1520527728.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:48.725Z,1520527728.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:48.740Z,1520527728.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:49.123Z,1520527729.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:49.138Z,1520527729.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:49.522Z,1520527729.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:49.538Z,1520527729.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:49.929Z,1520527729.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:49.945Z,1520527729.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:50.333Z,1520527730.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:50.354Z,1520527730.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:50.729Z,1520527730.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:50.745Z,1520527730.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:51.121Z,1520527731.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:51.137Z,1520527731.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:51.523Z,1520527731.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:51.546Z,1520527731.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:51.926Z,1520527731.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:51.941Z,1520527731.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:52.325Z,1520527732.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:52.341Z,1520527732.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:52.729Z,1520527732.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:52.745Z,1520527732.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:53.133Z,1520527733.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:53.148Z,1520527733.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:53.529Z,1520527733.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:53.544Z,1520527733.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:53.924Z,1520527733.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:53.939Z,1520527733.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:54.323Z,1520527734.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:54.339Z,1520527734.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:54.722Z,1520527734.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:54.737Z,1520527734.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:55.126Z,1520527735.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:55.140Z,1520527735.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:55.527Z,1520527735.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:55.542Z,1520527735.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:55.929Z,1520527735.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:55.945Z,1520527735.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:56.334Z,1520527736.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:56.348Z,1520527736.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:56.726Z,1520527736.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:56.755Z,1520527736.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:57.125Z,1520527737.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:57.141Z,1520527737.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:57.521Z,1520527737.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:57.551Z,1520527737.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:57.927Z,1520527737.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:57.943Z,1520527737.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:58.322Z,1520527738.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:58.338Z,1520527738.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:58.733Z,1520527738.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:58.749Z,1520527738.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:59.133Z,1520527739.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:59.149Z,1520527739.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:59.533Z,1520527739.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:59.549Z,1520527739.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:48:59.922Z,1520527739.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:48:59.947Z,1520527739.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:00.326Z,1520527740.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:00.346Z,1520527740.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:00.722Z,1520527740.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:00.738Z,1520527740.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:01.123Z,1520527741.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:01.139Z,1520527741.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:01.514Z,1520527741.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:01.547Z,1520527741.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:01.937Z,1520527741.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:01.958Z,1520527741.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:02.340Z,1520527742.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:02.362Z,1520527742.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:02.725Z,1520527742.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:02.747Z,1520527742.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:03.114Z,1520527743.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:03.146Z,1520527743.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:03.514Z,1520527743.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:03.540Z,1520527743.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:03.928Z,1520527743.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:03.944Z,1520527743.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:04.314Z,1520527744.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:04.346Z,1520527744.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:04.733Z,1520527744.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:04.748Z,1520527744.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:05.129Z,1520527745.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:05.157Z,1520527745.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:05.536Z,1520527745.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:05.552Z,1520527745.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:05.914Z,1520527745.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:05.946Z,1520527745.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:06.318Z,1520527746.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:06.345Z,1520527746.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:06.717Z,1520527746.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:06.743Z,1520527746.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:07.115Z,1520527747.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:07.141Z,1520527747.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:07.510Z,1520527747.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:07.542Z,1520527747.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:07.929Z,1520527747.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:07.945Z,1520527747.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:08.335Z,1520527748.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:08.363Z,1520527748.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:08.729Z,1520527748.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:08.752Z,1520527748.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:09.114Z,1520527749.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:09.150Z,1520527749.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:09.514Z,1520527749.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:09.547Z,1520527749.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:09.919Z,1520527749.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:09.945Z,1520527749.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:10.314Z,1520527750.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:10.350Z,1520527750.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:10.739Z,1520527750.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:10.754Z,1520527750.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:11.125Z,1520527751.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:11.159Z,1520527751.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:11.538Z,1520527751.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:11.553Z,1520527751.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:11.914Z,1520527751.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:11.950Z,1520527751.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:12.312Z,1520527752.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:12.327Z,1520527752.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:12.714Z,1520527752.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:12.729Z,1520527752.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:13.115Z,1520527753.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:13.130Z,1520527753.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:13.516Z,1520527753.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:13.531Z,1520527753.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:13.933Z,1520527753.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:13.957Z,1520527753.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:14.333Z,1520527754.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:14.355Z,1520527754.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:14.725Z,1520527754.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:14.757Z,1520527754.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:15.122Z,1520527755.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:15.137Z,1520527755.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:15.523Z,1520527755.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:15.538Z,1520527755.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:15.923Z,1520527755.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:15.938Z,1520527755.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:16.321Z,1520527756.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:16.342Z,1520527756.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:16.733Z,1520527756.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:16.764Z,1520527756.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:17.121Z,1520527757.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:17.136Z,1520527757.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:17.537Z,1520527757.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:17.560Z,1520527757.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:17.921Z,1520527757.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:17.936Z,1520527757.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:18.324Z,1520527758.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:18.339Z,1520527758.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:18.721Z,1520527758.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:18.736Z,1520527758.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:19.123Z,1520527759.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:19.138Z,1520527759.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:19.519Z,1520527759.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:19.539Z,1520527759.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:19.937Z,1520527759.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:19.959Z,1520527759.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:20.333Z,1520527760.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:20.362Z,1520527760.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:20.721Z,1520527760.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:20.737Z,1520527760.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:21.130Z,1520527761.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:21.167Z,1520527761.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:21.526Z,1520527761.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:21.541Z,1520527761.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:21.923Z,1520527761.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:21.938Z,1520527761.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:22.326Z,1520527762.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:22.342Z,1520527762.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:22.728Z,1520527762.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:22.744Z,1520527762.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:23.123Z,1520527763.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:23.155Z,1520527763.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:23.531Z,1520527763.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:23.547Z,1520527763.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:23.927Z,1520527763.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:23.942Z,1520527763.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:24.326Z,1520527764.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:24.347Z,1520527764.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:24.724Z,1520527764.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:24.739Z,1520527764.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:25.125Z,1520527765.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:25.140Z,1520527765.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:25.522Z,1520527765.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:25.542Z,1520527765.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:28.634Z,1520527768.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:28.651Z,1520527768.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:28.761Z,1520527768.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:28.802Z,1520527768.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:29.136Z,1520527769.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:29.151Z,1520527769.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:29.531Z,1520527769.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:29.550Z,1520527769.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:29.934Z,1520527769.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:29.955Z,1520527769.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:30.327Z,1520527770.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:30.341Z,1520527770.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:30.737Z,1520527770.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:30.752Z,1520527770.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:31.136Z,1520527771.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:31.151Z,1520527771.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:31.538Z,1520527771.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:31.558Z,1520527771.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:31.933Z,1520527771.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:31.948Z,1520527771.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:32.325Z,1520527772.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:32.352Z,1520527772.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:32.731Z,1520527772.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:32.746Z,1520527772.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:33.117Z,1520527773.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:33.145Z,1520527773.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:33.519Z,1520527773.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:33.550Z,1520527773.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:33.934Z,1520527773.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:33.960Z,1520527773.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:34.345Z,1520527774.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:34.360Z,1520527774.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:34.741Z,1520527774.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:34.757Z,1520527774.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:35.118Z,1520527775.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:35.163Z,1520527775.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:35.532Z,1520527775.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:35.548Z,1520527775.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:35.920Z,1520527775.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:35.951Z,1520527775.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:36.319Z,1520527776.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:36.354Z,1520527776.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:36.736Z,1520527776.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:36.759Z,1520527776.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:37.141Z,1520527777.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:37.162Z,1520527777.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:37.532Z,1520527777.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:37.564Z,1520527777.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:37.912Z,1520527777.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:37.939Z,1520527777.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:38.322Z,1520527778.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:38.349Z,1520527778.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:38.718Z,1520527778.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:38.751Z,1520527778.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:39.113Z,1520527779.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:39.128Z,1520527779.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:39.519Z,1520527779.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:39.547Z,1520527779.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:39.933Z,1520527779.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:39.959Z,1520527779.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:40.346Z,1520527780.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:40.362Z,1520527780.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:40.729Z,1520527780.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:40.755Z,1520527780.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:41.118Z,1520527781.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:41.160Z,1520527781.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:41.523Z,1520527781.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:41.558Z,1520527781.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:41.923Z,1520527781.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:41.938Z,1520527781.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:42.326Z,1520527782.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:42.341Z,1520527782.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:42.752Z,1520527782.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:42.790Z,1520527782.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:43.143Z,1520527783.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:43.203Z,1520527783.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:43.535Z,1520527783.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:43.571Z,1520527783.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:43.932Z,1520527783.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:43.975Z,1520527783.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:44.327Z,1520527784.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:44.375Z,1520527784.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:44.723Z,1520527784.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:44.738Z,1520527784.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:45.119Z,1520527785.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:45.168Z,1520527785.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:45.536Z,1520527785.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:45.551Z,1520527785.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:45.931Z,1520527785.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:45.950Z,1520527785.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:46.342Z,1520527786.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:46.363Z,1520527786.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:46.737Z,1520527786.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:46.752Z,1520527786.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:47.138Z,1520527787.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:47.158Z,1520527787.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:47.522Z,1520527787.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:47.555Z,1520527787.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:47.919Z,1520527787.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:47.945Z,1520527787.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:48.314Z,1520527788.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:48.347Z,1520527788.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:48.733Z,1520527788.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:48.752Z,1520527788.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:49.141Z,1520527789.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:49.157Z,1520527789.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:49.537Z,1520527789.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:49.551Z,1520527789.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:49.912Z,1520527789.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:49.936Z,1520527789.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:50.318Z,1520527790.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:50.351Z,1520527790.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:50.714Z,1520527790.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:50.749Z,1520527790.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:51.114Z,1520527791.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:51.137Z,1520527791.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:51.523Z,1520527791.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:51.554Z,1520527791.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:51.925Z,1520527791.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:51.959Z,1520527791.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:52.345Z,1520527792.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:52.362Z,1520527792.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:52.729Z,1520527792.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:52.763Z,1520527792.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:53.119Z,1520527793.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:53.156Z,1520527793.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:53.522Z,1520527793.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:53.554Z,1520527793.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:53.919Z,1520527793.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:53.947Z,1520527793.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:54.322Z,1520527794.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:54.360Z,1520527794.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:54.729Z,1520527794.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:54.761Z,1520527794.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:55.148Z,1520527795.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:55.163Z,1520527795.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:55.537Z,1520527795.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:55.566Z,1520527795.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:55.916Z,1520527795.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:55.932Z,1520527795.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:56.327Z,1520527796.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:56.358Z,1520527796.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:56.719Z,1520527796.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:56.734Z,1520527796.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:57.127Z,1520527797.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:57.143Z,1520527797.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:57.526Z,1520527797.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:57.546Z,1520527797.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:57.937Z,1520527797.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:57.952Z,1520527797.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:58.337Z,1520527798.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:58.352Z,1520527798.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:58.741Z,1520527798.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:58.772Z,1520527798.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:59.129Z,1520527799.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:59.144Z,1520527799.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:59.524Z,1520527799.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:59.540Z,1520527799.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:49:59.924Z,1520527799.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:49:59.954Z,1520527799.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:00.321Z,1520527800.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:00.336Z,1520527800.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:00.733Z,1520527800.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:00.748Z,1520527800.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:01.145Z,1520527801.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:01.161Z,1520527801.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:01.540Z,1520527801.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:01.555Z,1520527801.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:01.912Z,1520527801.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:01.943Z,1520527801.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:02.318Z,1520527802.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:02.350Z,1520527802.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:02.718Z,1520527802.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:02.752Z,1520527802.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:03.132Z,1520527803.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:03.147Z,1520527803.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:03.557Z,1520527803.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:03.587Z,1520527803.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:03.940Z,1520527803.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:03.955Z,1520527803.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:04.344Z,1520527804.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:04.384Z,1520527804.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:04.729Z,1520527804.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:04.761Z,1520527804.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:05.126Z,1520527805.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:05.141Z,1520527805.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:05.516Z,1520527805.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:05.532Z,1520527805.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:05.924Z,1520527805.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:05.939Z,1520527805.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:06.342Z,1520527806.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:06.432Z,1520527806.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:06.725Z,1520527806.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:06.741Z,1520527806.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:07.137Z,1520527807.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:07.161Z,1520527807.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:07.541Z,1520527807.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:07.570Z,1520527807.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:07.921Z,1520527807.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:07.936Z,1520527807.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:08.324Z,1520527808.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:08.339Z,1520527808.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:08.726Z,1520527808.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:08.741Z,1520527808.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:09.122Z,1520527809.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:09.137Z,1520527809.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:09.527Z,1520527809.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:09.543Z,1520527809.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:09.937Z,1520527809.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:09.968Z,1520527809.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:10.337Z,1520527810.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:10.368Z,1520527810.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:10.741Z,1520527810.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:10.772Z,1520527810.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:11.126Z,1520527811.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:11.141Z,1520527811.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:11.524Z,1520527811.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:11.544Z,1520527811.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:11.919Z,1520527811.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:11.951Z,1520527811.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:12.331Z,1520527812.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:12.346Z,1520527812.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:12.733Z,1520527812.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:12.761Z,1520527812.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:13.141Z,1520527813.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:13.162Z,1520527813.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:13.541Z,1520527813.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:13.556Z,1520527813.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:13.927Z,1520527813.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:13.947Z,1520527813.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:14.332Z,1520527814.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:14.348Z,1520527814.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:14.725Z,1520527814.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:14.749Z,1520527814.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:15.132Z,1520527815.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:15.148Z,1520527815.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:15.521Z,1520527815.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:15.555Z,1520527815.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:15.942Z,1520527815.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:15.957Z,1520527815.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:16.340Z,1520527816.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:16.355Z,1520527816.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:16.738Z,1520527816.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:16.753Z,1520527816.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:17.118Z,1520527817.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:17.150Z,1520527817.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:17.522Z,1520527817.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:17.550Z,1520527817.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:17.919Z,1520527817.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:17.951Z,1520527817.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:18.322Z,1520527818.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:18.349Z,1520527818.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:18.738Z,1520527818.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:18.754Z,1520527818.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:19.141Z,1520527819.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:19.157Z,1520527819.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:19.537Z,1520527819.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:19.552Z,1520527819.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:19.916Z,1520527819.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:19.944Z,1520527819.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:20.322Z,1520527820.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:20.354Z,1520527820.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:20.718Z,1520527820.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:20.756Z,1520527820.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:21.113Z,1520527821.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:21.129Z,1520527821.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:21.523Z,1520527821.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:21.547Z,1520527821.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:21.933Z,1520527821.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:21.959Z,1520527821.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:22.337Z,1520527822.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:22.364Z,1520527822.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:22.737Z,1520527822.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:22.763Z,1520527822.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:23.126Z,1520527823.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:23.162Z,1520527823.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:23.522Z,1520527823.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:23.538Z,1520527823.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:23.920Z,1520527823.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:23.936Z,1520527823.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:24.326Z,1520527824.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:24.341Z,1520527824.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:24.729Z,1520527824.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:24.757Z,1520527824.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:25.141Z,1520527825.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:25.165Z,1520527825.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:25.541Z,1520527825.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:25.570Z,1520527825.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:28.628Z,1520527828.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:28.644Z,1520527828.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:28.748Z,1520527828.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:28.791Z,1520527828.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:29.142Z,1520527829.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:29.171Z,1520527829.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:29.528Z,1520527829.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:29.543Z,1520527829.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:29.941Z,1520527829.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:29.970Z,1520527829.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:30.322Z,1520527830.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:30.342Z,1520527830.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:30.721Z,1520527830.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:30.737Z,1520527830.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:31.123Z,1520527831.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:31.138Z,1520527831.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:31.522Z,1520527831.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:31.537Z,1520527831.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:31.928Z,1520527831.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:31.944Z,1520527831.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:32.329Z,1520527832.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:32.345Z,1520527832.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:32.730Z,1520527832.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:32.745Z,1520527832.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:33.116Z,1520527833.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:33.132Z,1520527833.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:33.523Z,1520527833.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:33.539Z,1520527833.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:33.919Z,1520527833.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:33.946Z,1520527833.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:34.319Z,1520527834.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:34.334Z,1520527834.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:34.729Z,1520527834.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:34.745Z,1520527834.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:35.133Z,1520527835.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:35.148Z,1520527835.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:35.528Z,1520527835.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:35.544Z,1520527835.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:35.926Z,1520527835.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:35.941Z,1520527835.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:36.322Z,1520527836.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:36.342Z,1520527836.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:36.716Z,1520527836.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:36.732Z,1520527836.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:37.119Z,1520527837.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:37.146Z,1520527837.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:37.526Z,1520527837.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:37.543Z,1520527837.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:37.932Z,1520527837.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:37.948Z,1520527837.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:38.333Z,1520527838.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:38.349Z,1520527838.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:38.730Z,1520527838.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:38.750Z,1520527838.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:39.127Z,1520527839.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:39.142Z,1520527839.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:39.522Z,1520527839.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:39.538Z,1520527839.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:39.921Z,1520527839.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:39.941Z,1520527839.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:40.328Z,1520527840.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:40.343Z,1520527840.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:40.732Z,1520527840.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:40.747Z,1520527840.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:41.142Z,1520527841.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:41.157Z,1520527841.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:41.537Z,1520527841.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:41.552Z,1520527841.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:41.926Z,1520527841.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:41.946Z,1520527841.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:42.326Z,1520527842.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:42.346Z,1520527842.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:42.726Z,1520527842.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:42.742Z,1520527842.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:43.127Z,1520527843.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:43.143Z,1520527843.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:43.517Z,1520527843.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:43.540Z,1520527843.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:43.929Z,1520527843.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:43.945Z,1520527843.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:44.335Z,1520527844.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:44.351Z,1520527844.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:44.736Z,1520527844.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:44.751Z,1520527844.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:45.128Z,1520527845.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:45.144Z,1520527845.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:45.517Z,1520527845.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:45.542Z,1520527845.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:45.928Z,1520527845.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:45.943Z,1520527845.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:46.310Z,1520527846.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:46.338Z,1520527846.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:46.733Z,1520527846.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:46.754Z,1520527846.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:47.137Z,1520527847.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:47.152Z,1520527847.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:47.537Z,1520527847.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:47.552Z,1520527847.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:47.925Z,1520527847.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:47.941Z,1520527847.941 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:47.941Z,1520527847.941 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 182
2018-03-08T16:50:47.941Z,1520527847.941 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T16:50:47.943Z,1520527847.943 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:47.943Z,1520527847.943 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 182
2018-03-08T16:50:47.943Z,1520527847.943 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T16:50:47.945Z,1520527847.945 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:47.945Z,1520527847.945 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 182
2018-03-08T16:50:47.945Z,1520527847.945 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T16:50:47.957Z,1520527847.957 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T16:50:47.957Z,1520527847.957 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T16:50:47.957Z,1520527847.957 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T16:50:48.317Z,1520527848.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:48.360Z,1520527848.360 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T16:50:48.360Z,1520527848.360 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 182
2018-03-08T16:50:48.361Z,1520527848.361 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T16:50:48.361Z,1520527848.361 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 182
2018-03-08T16:50:48.361Z,1520527848.361 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T16:50:48.361Z,1520527848.361 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 182
2018-03-08T16:50:48.723Z,1520527848.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:48.738Z,1520527848.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T16:50:48.738Z,1520527848.738 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:50:48.738Z,1520527848.738 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:50:48.739Z,1520527848.739 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T16:50:48.739Z,1520527848.739 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:50:48.740Z,1520527848.740 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:50:48.740Z,1520527848.740 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T16:50:48.740Z,1520527848.740 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:50:48.741Z,1520527848.741 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:50:49.116Z,1520527849.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:49.158Z,1520527849.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T16:50:49.159Z,1520527849.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:49.519Z,1520527849.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:49.550Z,1520527849.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T16:50:49.551Z,1520527849.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:49.926Z,1520527849.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:49.962Z,1520527849.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T16:50:49.963Z,1520527849.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:50.343Z,1520527850.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:50.358Z,1520527850.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T16:50:50.359Z,1520527850.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:50.725Z,1520527850.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:50.757Z,1520527850.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T16:50:50.758Z,1520527850.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:51.119Z,1520527851.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:51.134Z,1520527851.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T16:50:51.135Z,1520527851.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:51.523Z,1520527851.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:51.563Z,1520527851.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T16:50:51.564Z,1520527851.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:51.923Z,1520527851.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:51.938Z,1520527851.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T16:50:51.939Z,1520527851.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:52.320Z,1520527852.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:52.335Z,1520527852.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T16:50:52.336Z,1520527852.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:52.737Z,1520527852.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:52.768Z,1520527852.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T16:50:52.773Z,1520527852.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:53.129Z,1520527853.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:53.143Z,1520527853.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T16:50:53.145Z,1520527853.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:53.529Z,1520527853.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:53.544Z,1520527853.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T16:50:53.546Z,1520527853.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:53.926Z,1520527853.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:53.941Z,1520527853.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T16:50:53.942Z,1520527853.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:54.318Z,1520527854.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:54.332Z,1520527854.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T16:50:54.334Z,1520527854.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:54.717Z,1520527854.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:54.739Z,1520527854.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T16:50:54.739Z,1520527854.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:55.121Z,1520527855.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:55.140Z,1520527855.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T16:50:55.142Z,1520527855.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:55.525Z,1520527855.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:55.539Z,1520527855.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T16:50:55.540Z,1520527855.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:55.929Z,1520527855.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:55.944Z,1520527855.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T16:50:55.945Z,1520527855.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:56.329Z,1520527856.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:56.344Z,1520527856.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T16:50:56.345Z,1520527856.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:56.730Z,1520527856.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:56.750Z,1520527856.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T16:50:56.751Z,1520527856.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:57.120Z,1520527857.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:57.135Z,1520527857.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T16:50:57.136Z,1520527857.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:57.523Z,1520527857.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:57.538Z,1520527857.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T16:50:57.539Z,1520527857.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:57.918Z,1520527857.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:57.933Z,1520527857.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T16:50:57.934Z,1520527857.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:58.326Z,1520527858.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:58.342Z,1520527858.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T16:50:58.342Z,1520527858.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:58.729Z,1520527858.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:58.744Z,1520527858.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T16:50:58.746Z,1520527858.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:59.133Z,1520527859.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:59.147Z,1520527859.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T16:50:59.148Z,1520527859.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:59.529Z,1520527859.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:59.544Z,1520527859.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T16:50:59.545Z,1520527859.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:50:59.926Z,1520527859.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:50:59.941Z,1520527859.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T16:50:59.942Z,1520527859.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:00.325Z,1520527860.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:00.340Z,1520527860.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T16:51:00.341Z,1520527860.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:00.726Z,1520527860.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:00.741Z,1520527860.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T16:51:00.742Z,1520527860.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:01.126Z,1520527861.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:01.141Z,1520527861.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T16:51:01.142Z,1520527861.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:01.525Z,1520527861.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:01.540Z,1520527861.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T16:51:01.541Z,1520527861.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:01.929Z,1520527861.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:01.944Z,1520527861.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T16:51:01.945Z,1520527861.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:02.333Z,1520527862.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:02.348Z,1520527862.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T16:51:02.349Z,1520527862.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:02.729Z,1520527862.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:02.750Z,1520527862.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T16:51:02.751Z,1520527862.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:03.120Z,1520527863.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:03.135Z,1520527863.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T16:51:03.136Z,1520527863.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:03.522Z,1520527863.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:03.537Z,1520527863.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T16:51:03.538Z,1520527863.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:03.918Z,1520527863.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:03.933Z,1520527863.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T16:51:03.934Z,1520527863.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:04.328Z,1520527864.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:04.343Z,1520527864.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T16:51:04.344Z,1520527864.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:04.729Z,1520527864.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:04.745Z,1520527864.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T16:51:04.746Z,1520527864.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:05.129Z,1520527865.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:05.143Z,1520527865.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T16:51:05.144Z,1520527865.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:05.529Z,1520527865.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:05.544Z,1520527865.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T16:51:05.545Z,1520527865.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:05.926Z,1520527865.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:05.941Z,1520527865.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T16:51:05.942Z,1520527865.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:06.325Z,1520527866.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:06.340Z,1520527866.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T16:51:06.341Z,1520527866.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:06.725Z,1520527866.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:06.740Z,1520527866.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T16:51:06.741Z,1520527866.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:07.126Z,1520527867.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:07.146Z,1520527867.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T16:51:07.147Z,1520527867.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:07.525Z,1520527867.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:07.539Z,1520527867.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T16:51:07.540Z,1520527867.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:07.929Z,1520527867.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:07.945Z,1520527867.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:08.329Z,1520527868.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:08.345Z,1520527868.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:08.729Z,1520527868.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:08.750Z,1520527868.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:09.122Z,1520527869.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:09.137Z,1520527869.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:09.526Z,1520527869.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:09.541Z,1520527869.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:09.923Z,1520527869.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:09.938Z,1520527869.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:10.323Z,1520527870.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:10.339Z,1520527870.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:10.729Z,1520527870.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:10.745Z,1520527870.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:11.127Z,1520527871.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:11.150Z,1520527871.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:11.529Z,1520527871.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:11.545Z,1520527871.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:11.925Z,1520527871.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:11.940Z,1520527871.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:12.317Z,1520527872.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:12.332Z,1520527872.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:12.727Z,1520527872.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:12.742Z,1520527872.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:13.121Z,1520527873.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:13.140Z,1520527873.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:13.521Z,1520527873.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:13.536Z,1520527873.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:13.930Z,1520527873.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:13.946Z,1520527873.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:14.333Z,1520527874.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:14.349Z,1520527874.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:14.729Z,1520527874.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:14.750Z,1520527874.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:15.121Z,1520527875.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:15.136Z,1520527875.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:15.522Z,1520527875.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:15.537Z,1520527875.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:15.921Z,1520527875.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:15.937Z,1520527875.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:16.327Z,1520527876.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:16.342Z,1520527876.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:16.729Z,1520527876.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:16.745Z,1520527876.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:17.129Z,1520527877.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:17.144Z,1520527877.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:17.529Z,1520527877.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:17.545Z,1520527877.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:17.926Z,1520527877.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:17.941Z,1520527877.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:18.326Z,1520527878.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:18.340Z,1520527878.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:18.728Z,1520527878.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:18.744Z,1520527878.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:19.126Z,1520527879.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:19.142Z,1520527879.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:19.525Z,1520527879.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:19.540Z,1520527879.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:19.929Z,1520527879.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:19.945Z,1520527879.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:20.333Z,1520527880.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:20.349Z,1520527880.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:20.730Z,1520527880.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:20.750Z,1520527880.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:21.125Z,1520527881.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:21.140Z,1520527881.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:21.530Z,1520527881.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:21.551Z,1520527881.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:21.926Z,1520527881.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:21.941Z,1520527881.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:22.327Z,1520527882.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:22.347Z,1520527882.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:22.731Z,1520527882.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:22.751Z,1520527882.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:23.131Z,1520527883.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:23.146Z,1520527883.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:23.532Z,1520527883.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:23.548Z,1520527883.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:23.926Z,1520527883.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:23.947Z,1520527883.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:24.327Z,1520527884.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:24.342Z,1520527884.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:24.727Z,1520527884.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:24.743Z,1520527884.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:25.121Z,1520527885.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:25.141Z,1520527885.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:25.523Z,1520527885.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:25.538Z,1520527885.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:25.933Z,1520527885.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:25.949Z,1520527885.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:29.041Z,1520527889.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:29.078Z,1520527889.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:29.183Z,1520527889.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:29.227Z,1520527889.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:29.547Z,1520527889.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:29.563Z,1520527889.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:29.948Z,1520527889.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:29.963Z,1520527889.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:30.352Z,1520527890.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:30.368Z,1520527890.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:30.750Z,1520527890.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:30.766Z,1520527890.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:31.162Z,1520527891.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:31.190Z,1520527891.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:31.550Z,1520527891.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:31.566Z,1520527891.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:31.948Z,1520527891.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:31.964Z,1520527891.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:32.348Z,1520527892.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:32.365Z,1520527892.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:32.746Z,1520527892.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:32.763Z,1520527892.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:33.149Z,1520527893.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:33.164Z,1520527893.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:33.548Z,1520527893.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:33.563Z,1520527893.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:33.962Z,1520527893.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:33.993Z,1520527893.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:34.361Z,1520527894.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:34.397Z,1520527894.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:34.754Z,1520527894.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:34.769Z,1520527894.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:35.143Z,1520527895.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:35.159Z,1520527895.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:35.546Z,1520527895.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:35.562Z,1520527895.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:35.950Z,1520527895.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:35.966Z,1520527895.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:36.342Z,1520527896.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:36.357Z,1520527896.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:36.752Z,1520527896.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:36.775Z,1520527896.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:37.158Z,1520527897.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:37.179Z,1520527897.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:37.556Z,1520527897.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:37.571Z,1520527897.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:37.947Z,1520527897.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:37.962Z,1520527897.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:38.337Z,1520527898.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:38.360Z,1520527898.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:38.741Z,1520527898.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:38.757Z,1520527898.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:39.147Z,1520527899.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:39.163Z,1520527899.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:39.550Z,1520527899.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:39.570Z,1520527899.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:39.957Z,1520527899.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:39.972Z,1520527899.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:40.357Z,1520527900.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:40.372Z,1520527900.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:40.756Z,1520527900.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:40.771Z,1520527900.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:41.150Z,1520527901.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:41.165Z,1520527901.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:41.546Z,1520527901.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:41.561Z,1520527901.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:41.957Z,1520527901.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:41.977Z,1520527901.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:42.365Z,1520527902.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:42.381Z,1520527902.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:42.759Z,1520527902.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:42.783Z,1520527902.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:43.163Z,1520527903.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:43.187Z,1520527903.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:43.551Z,1520527903.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:43.583Z,1520527903.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:43.946Z,1520527903.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:43.986Z,1520527903.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:44.356Z,1520527904.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:44.395Z,1520527904.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:44.771Z,1520527904.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:44.787Z,1520527904.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:45.143Z,1520527905.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:45.176Z,1520527905.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:45.547Z,1520527905.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:45.575Z,1520527905.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:45.956Z,1520527905.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:45.979Z,1520527905.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:46.369Z,1520527906.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:46.402Z,1520527906.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:46.756Z,1520527906.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:46.779Z,1520527906.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:47.149Z,1520527907.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:47.165Z,1520527907.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:47.546Z,1520527907.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:47.561Z,1520527907.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:47.951Z,1520527907.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:47.966Z,1520527907.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:48.350Z,1520527908.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:48.365Z,1520527908.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:48.757Z,1520527908.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:48.773Z,1520527908.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:49.156Z,1520527909.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:49.171Z,1520527909.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:49.556Z,1520527909.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:49.571Z,1520527909.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:49.951Z,1520527909.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:49.966Z,1520527909.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:50.350Z,1520527910.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:50.367Z,1520527910.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:50.746Z,1520527910.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:50.762Z,1520527910.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:51.147Z,1520527911.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:51.162Z,1520527911.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:51.550Z,1520527911.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:51.571Z,1520527911.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:51.955Z,1520527911.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:51.971Z,1520527911.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:52.356Z,1520527912.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:52.371Z,1520527912.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:52.755Z,1520527912.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:52.771Z,1520527912.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:53.149Z,1520527913.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:53.165Z,1520527913.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:53.547Z,1520527913.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:53.562Z,1520527913.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:53.951Z,1520527913.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:53.966Z,1520527913.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:54.343Z,1520527914.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:54.358Z,1520527914.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:54.756Z,1520527914.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:54.778Z,1520527914.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:55.157Z,1520527915.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:55.172Z,1520527915.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:55.555Z,1520527915.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:55.571Z,1520527915.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:55.601Z,1520527915.601 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T16:51:55.951Z,1520527915.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:55.970Z,1520527915.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:56.350Z,1520527916.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:56.370Z,1520527916.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:56.756Z,1520527916.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:56.772Z,1520527916.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:57.148Z,1520527917.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:57.163Z,1520527917.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:57.556Z,1520527917.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:57.572Z,1520527917.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:57.952Z,1520527917.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:57.968Z,1520527917.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:58.357Z,1520527918.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:58.401Z,1520527918.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:58.757Z,1520527918.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:58.772Z,1520527918.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:59.138Z,1520527919.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:59.171Z,1520527919.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:59.538Z,1520527919.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:59.572Z,1520527919.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:51:59.943Z,1520527919.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:51:59.969Z,1520527919.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:00.338Z,1520527920.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:00.365Z,1520527920.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:00.757Z,1520527920.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:00.772Z,1520527920.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:01.165Z,1520527921.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:01.181Z,1520527921.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:01.560Z,1520527921.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:01.576Z,1520527921.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:01.938Z,1520527921.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:01.964Z,1520527921.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:02.342Z,1520527922.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:02.368Z,1520527922.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:02.734Z,1520527922.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:02.759Z,1520527922.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:03.144Z,1520527923.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:03.186Z,1520527923.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:03.544Z,1520527923.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:03.559Z,1520527923.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:03.948Z,1520527923.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:03.963Z,1520527923.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:04.357Z,1520527924.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:04.389Z,1520527924.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:04.757Z,1520527924.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:04.789Z,1520527924.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:05.142Z,1520527925.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:05.158Z,1520527925.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:05.545Z,1520527925.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:05.560Z,1520527925.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:05.943Z,1520527925.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:05.966Z,1520527925.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:06.348Z,1520527926.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:06.363Z,1520527926.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:06.757Z,1520527926.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:06.772Z,1520527926.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:07.149Z,1520527927.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:07.165Z,1520527927.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:07.560Z,1520527927.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:07.576Z,1520527927.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:07.953Z,1520527927.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:07.967Z,1520527927.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:08.345Z,1520527928.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:08.360Z,1520527928.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:08.756Z,1520527928.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:08.772Z,1520527928.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:09.147Z,1520527929.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:09.163Z,1520527929.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:09.550Z,1520527929.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:09.567Z,1520527929.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:09.954Z,1520527929.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:09.971Z,1520527929.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:10.357Z,1520527930.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:10.373Z,1520527930.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:10.752Z,1520527930.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:10.772Z,1520527930.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:11.146Z,1520527931.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:11.166Z,1520527931.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:11.547Z,1520527931.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:11.561Z,1520527931.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:11.941Z,1520527931.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:11.961Z,1520527931.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:12.345Z,1520527932.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:12.361Z,1520527932.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:12.753Z,1520527932.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:12.768Z,1520527932.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:13.151Z,1520527933.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:13.170Z,1520527933.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:13.553Z,1520527933.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:13.568Z,1520527933.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:13.947Z,1520527933.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:13.962Z,1520527933.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:14.341Z,1520527934.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:14.369Z,1520527934.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:14.734Z,1520527934.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:14.761Z,1520527934.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:15.147Z,1520527935.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:15.162Z,1520527935.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:15.534Z,1520527935.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:15.566Z,1520527935.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:15.956Z,1520527935.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:15.972Z,1520527935.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:16.360Z,1520527936.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:16.375Z,1520527936.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:16.756Z,1520527936.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:16.772Z,1520527936.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:17.146Z,1520527937.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:17.161Z,1520527937.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:17.548Z,1520527937.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:17.563Z,1520527937.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:17.951Z,1520527937.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:17.966Z,1520527937.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:18.346Z,1520527938.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:18.361Z,1520527938.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:18.757Z,1520527938.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:18.775Z,1520527938.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:19.152Z,1520527939.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:19.167Z,1520527939.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:19.558Z,1520527939.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:19.573Z,1520527939.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:19.950Z,1520527939.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:19.965Z,1520527939.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:20.338Z,1520527940.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:20.371Z,1520527940.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:20.738Z,1520527940.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:20.764Z,1520527940.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:21.139Z,1520527941.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:21.170Z,1520527941.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:21.542Z,1520527941.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:21.569Z,1520527941.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:21.957Z,1520527941.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:21.972Z,1520527941.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:22.368Z,1520527942.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:22.390Z,1520527942.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:22.753Z,1520527942.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:22.768Z,1520527942.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:23.137Z,1520527943.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:23.163Z,1520527943.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:23.538Z,1520527943.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:23.564Z,1520527943.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:23.943Z,1520527943.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:23.969Z,1520527943.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:24.334Z,1520527944.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:24.367Z,1520527944.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:24.762Z,1520527944.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:24.777Z,1520527944.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:25.157Z,1520527945.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:25.172Z,1520527945.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:25.176Z,1520527945.176 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T16:47:24.8Z
2018-03-08T16:52:25.176Z,1520527945.176 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T16:52:25.176Z,1520527945.176 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T16:52:25.560Z,1520527945.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:25.576Z,1520527945.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:26.034Z,1520527946.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:26.049Z,1520527946.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:29.250Z,1520527949.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:29.273Z,1520527949.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:29.377Z,1520527949.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:29.423Z,1520527949.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:29.701Z,1520527949.701 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0212.lzma
2018-03-08T16:52:29.768Z,1520527949.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:29.819Z,1520527949.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:30.125Z,1520527950.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:30.151Z,1520527950.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:30.499Z,1520527950.499 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0212.lzma.bak
2018-03-08T16:52:30.499Z,1520527950.499 [DataOverHttps](INFO): SBD MOMSN=7987437
2018-03-08T16:52:30.554Z,1520527950.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:30.591Z,1520527950.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:31.142Z,1520527951.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:31.157Z,1520527951.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:31.324Z,1520527951.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:31.362Z,1520527951.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:34.500Z,1520527954.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:34.515Z,1520527954.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:34.612Z,1520527954.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:34.646Z,1520527954.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:35.010Z,1520527955.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:35.039Z,1520527955.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:35.413Z,1520527955.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:35.439Z,1520527955.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:35.803Z,1520527955.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:35.835Z,1520527955.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:36.208Z,1520527956.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:36.230Z,1520527956.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:36.603Z,1520527956.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:36.618Z,1520527956.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:39.794Z,1520527959.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:39.810Z,1520527959.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:39.907Z,1520527959.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:39.948Z,1520527959.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:40.249Z,1520527960.249 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180308T074127/Express0213.lzma
2018-03-08T16:52:40.282Z,1520527960.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:40.318Z,1520527960.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:40.670Z,1520527960.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:40.685Z,1520527960.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:45.291Z,1520527965.291 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0213.lzma.bak
2018-03-08T16:52:45.291Z,1520527965.291 [DataOverHttps](INFO): SBD MOMSN=7987439
2018-03-08T16:52:45.327Z,1520527965.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:45.351Z,1520527965.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:45.646Z,1520527965.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:45.661Z,1520527965.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:45.664Z,1520527965.664 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T16:52:45.664Z,1520527965.664 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T16:52:45.664Z,1520527965.664 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T16:52:45.819Z,1520527965.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:45.846Z,1520527965.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:48.904Z,1520527968.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:48.919Z,1520527968.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:49.042Z,1520527969.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:49.058Z,1520527969.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:49.421Z,1520527969.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:49.454Z,1520527969.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:49.813Z,1520527969.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:49.845Z,1520527969.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:50.208Z,1520527970.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:50.223Z,1520527970.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:50.605Z,1520527970.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:50.620Z,1520527970.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:51.007Z,1520527971.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:51.023Z,1520527971.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:51.410Z,1520527971.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:51.426Z,1520527971.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:51.821Z,1520527971.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:51.849Z,1520527971.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:52.217Z,1520527972.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:52.232Z,1520527972.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:52.621Z,1520527972.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:52.651Z,1520527972.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:53.006Z,1520527973.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:53.020Z,1520527973.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:53.410Z,1520527973.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:53.430Z,1520527973.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:53.807Z,1520527973.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:53.823Z,1520527973.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:54.207Z,1520527974.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:54.221Z,1520527974.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:54.603Z,1520527974.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:54.654Z,1520527974.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:55.026Z,1520527975.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:55.067Z,1520527975.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:55.417Z,1520527975.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:55.438Z,1520527975.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:55.816Z,1520527975.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:55.838Z,1520527975.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:56.210Z,1520527976.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:56.225Z,1520527976.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:56.610Z,1520527976.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:56.625Z,1520527976.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:57.011Z,1520527977.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:57.026Z,1520527977.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:57.411Z,1520527977.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:57.427Z,1520527977.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:57.816Z,1520527977.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:57.831Z,1520527977.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:58.217Z,1520527978.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:58.233Z,1520527978.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:58.615Z,1520527978.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:58.631Z,1520527978.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:59.012Z,1520527979.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:59.026Z,1520527979.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:59.410Z,1520527979.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:59.425Z,1520527979.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:52:59.809Z,1520527979.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:52:59.825Z,1520527979.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:00.208Z,1520527980.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:00.223Z,1520527980.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:00.610Z,1520527980.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:00.630Z,1520527980.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:01.016Z,1520527981.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:01.031Z,1520527981.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:01.417Z,1520527981.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:01.433Z,1520527981.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:01.816Z,1520527981.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:01.831Z,1520527981.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:02.211Z,1520527982.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:02.227Z,1520527982.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:02.611Z,1520527982.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:02.626Z,1520527982.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:03.013Z,1520527983.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:03.028Z,1520527983.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:03.406Z,1520527983.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:03.421Z,1520527983.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:03.816Z,1520527983.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:03.831Z,1520527983.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:04.216Z,1520527984.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:04.231Z,1520527984.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:04.613Z,1520527984.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:04.628Z,1520527984.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:05.011Z,1520527985.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:05.026Z,1520527985.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:05.410Z,1520527985.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:05.430Z,1520527985.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:05.810Z,1520527985.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:05.826Z,1520527985.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:06.226Z,1520527986.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:06.288Z,1520527986.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:06.608Z,1520527986.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:06.623Z,1520527986.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:07.016Z,1520527987.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:07.031Z,1520527987.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:07.417Z,1520527987.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:07.432Z,1520527987.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:07.817Z,1520527987.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:07.838Z,1520527987.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:08.210Z,1520527988.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:08.225Z,1520527988.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:08.608Z,1520527988.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:08.623Z,1520527988.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:09.006Z,1520527989.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:09.027Z,1520527989.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:09.413Z,1520527989.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:09.428Z,1520527989.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:09.819Z,1520527989.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:09.833Z,1520527989.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:10.221Z,1520527990.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:10.237Z,1520527990.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:10.616Z,1520527990.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:10.632Z,1520527990.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:11.014Z,1520527991.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:11.030Z,1520527991.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:11.407Z,1520527991.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:11.422Z,1520527991.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:11.812Z,1520527991.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:11.827Z,1520527991.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:12.211Z,1520527992.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:12.225Z,1520527992.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:12.613Z,1520527992.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:12.629Z,1520527992.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:13.018Z,1520527993.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:13.033Z,1520527993.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:13.422Z,1520527993.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:13.436Z,1520527993.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:13.820Z,1520527993.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:13.842Z,1520527993.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:14.214Z,1520527994.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:14.229Z,1520527994.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:14.606Z,1520527994.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:14.622Z,1520527994.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:15.012Z,1520527995.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:15.028Z,1520527995.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:15.406Z,1520527995.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:15.422Z,1520527995.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:15.784Z,1520527995.784 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T16:53:15.784Z,1520527995.784 [NAL9602] Data Fault, FailCount= 1
2018-03-08T16:53:15.784Z,1520527995.784 [NAL9602](ERROR): Data Fault
2018-03-08T16:53:15.817Z,1520527995.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:15.882Z,1520527995.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:15.929Z,1520527995.929 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T16:53:16.181Z,1520527996.181 [NAL9602](INFO): Powering down
2018-03-08T16:53:16.198Z,1520527996.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:16.235Z,1520527996.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:16.598Z,1520527996.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:16.625Z,1520527996.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:17.005Z,1520527997.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:17.031Z,1520527997.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:17.057Z,1520527997.057 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T16:53:17.057Z,1520527997.057 [NAL9602] No Fault, FailCount= 1
2018-03-08T16:53:17.394Z,1520527997.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:17.427Z,1520527997.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:17.805Z,1520527997.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:17.821Z,1520527997.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:18.205Z,1520527998.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:18.221Z,1520527998.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:18.622Z,1520527998.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:18.671Z,1520527998.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:19.009Z,1520527999.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:19.024Z,1520527999.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:19.405Z,1520527999.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:19.426Z,1520527999.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:19.798Z,1520527999.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:19.831Z,1520527999.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:20.202Z,1520528000.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:20.228Z,1520528000.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:20.601Z,1520528000.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:20.635Z,1520528000.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:20.997Z,1520528000.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:21.023Z,1520528001.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:21.398Z,1520528001.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:21.425Z,1520528001.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:21.798Z,1520528001.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:21.823Z,1520528001.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:22.198Z,1520528002.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:22.224Z,1520528002.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:22.598Z,1520528002.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:22.635Z,1520528002.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:23.002Z,1520528003.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:23.027Z,1520528003.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:23.396Z,1520528003.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:23.423Z,1520528003.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:23.804Z,1520528003.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:23.833Z,1520528003.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:24.208Z,1520528004.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:24.233Z,1520528004.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:24.602Z,1520528004.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:24.634Z,1520528004.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:25.002Z,1520528005.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:25.037Z,1520528005.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:25.405Z,1520528005.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:25.440Z,1520528005.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:25.797Z,1520528005.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:25.812Z,1520528005.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:26.199Z,1520528006.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:26.215Z,1520528006.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:26.602Z,1520528006.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:26.616Z,1520528006.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:26.995Z,1520528006.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:27.010Z,1520528007.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:27.406Z,1520528007.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:27.438Z,1520528007.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:27.806Z,1520528007.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:27.821Z,1520528007.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:28.196Z,1520528008.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:28.211Z,1520528008.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:28.607Z,1520528008.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:28.622Z,1520528008.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:29.005Z,1520528009.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:29.021Z,1520528009.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:29.399Z,1520528009.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:29.414Z,1520528009.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:29.806Z,1520528009.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:29.821Z,1520528009.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:30.228Z,1520528010.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:30.261Z,1520528010.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:30.601Z,1520528010.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:30.616Z,1520528010.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:31.006Z,1520528011.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:31.022Z,1520528011.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:31.403Z,1520528011.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:31.417Z,1520528011.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:31.803Z,1520528011.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:31.818Z,1520528011.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:32.206Z,1520528012.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:32.222Z,1520528012.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:32.606Z,1520528012.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:32.620Z,1520528012.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:32.999Z,1520528012.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:33.014Z,1520528013.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:33.408Z,1520528013.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:33.423Z,1520528013.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:33.802Z,1520528013.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:33.822Z,1520528013.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:34.201Z,1520528014.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:34.215Z,1520528014.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:34.606Z,1520528014.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:34.626Z,1520528014.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:35.010Z,1520528015.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:35.025Z,1520528015.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:35.404Z,1520528015.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:35.419Z,1520528015.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:35.808Z,1520528015.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:35.823Z,1520528015.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:36.204Z,1520528016.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:36.227Z,1520528016.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:36.609Z,1520528016.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:36.624Z,1520528016.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:37.008Z,1520528017.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:37.024Z,1520528017.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:37.407Z,1520528017.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:37.422Z,1520528017.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:37.803Z,1520528017.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:37.818Z,1520528017.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:38.210Z,1520528018.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:38.225Z,1520528018.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:38.607Z,1520528018.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:38.623Z,1520528018.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:39.003Z,1520528019.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:39.018Z,1520528019.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:39.404Z,1520528019.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:39.428Z,1520528019.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:39.805Z,1520528019.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:39.821Z,1520528019.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:40.205Z,1520528020.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:40.220Z,1520528020.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:40.609Z,1520528020.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:40.625Z,1520528020.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:41.004Z,1520528021.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:41.027Z,1520528021.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:41.406Z,1520528021.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:41.421Z,1520528021.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:41.810Z,1520528021.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:41.837Z,1520528021.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:42.198Z,1520528022.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:42.224Z,1520528022.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:42.599Z,1520528022.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:42.634Z,1520528022.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:43.013Z,1520528023.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:43.037Z,1520528023.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:43.400Z,1520528023.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:43.434Z,1520528023.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:43.798Z,1520528023.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:43.829Z,1520528023.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:44.202Z,1520528024.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:44.243Z,1520528024.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:44.614Z,1520528024.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:44.641Z,1520528024.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:45.000Z,1520528025.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:45.015Z,1520528025.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:45.404Z,1520528025.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:45.448Z,1520528025.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:45.805Z,1520528025.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:45.826Z,1520528025.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:46.194Z,1520528026.194 [NAL9602](INFO): Powering up NAL9602
2018-03-08T16:53:46.211Z,1520528026.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:46.226Z,1520528026.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:49.345Z,1520528029.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:49.361Z,1520528029.361 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:49.361Z,1520528029.361 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 183
2018-03-08T16:53:49.361Z,1520528029.361 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T16:53:49.363Z,1520528029.363 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:49.363Z,1520528029.363 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 183
2018-03-08T16:53:49.363Z,1520528029.363 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T16:53:49.365Z,1520528029.365 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:49.365Z,1520528029.365 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 183
2018-03-08T16:53:49.365Z,1520528029.365 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T16:53:49.378Z,1520528029.378 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T16:53:49.378Z,1520528029.378 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T16:53:49.378Z,1520528029.378 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T16:53:49.458Z,1520528029.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:49.517Z,1520528029.517 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T16:53:49.517Z,1520528029.517 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 183
2018-03-08T16:53:49.517Z,1520528029.517 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T16:53:49.517Z,1520528029.517 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 183
2018-03-08T16:53:49.518Z,1520528029.518 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T16:53:49.518Z,1520528029.518 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 183
2018-03-08T16:53:49.825Z,1520528029.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:49.839Z,1520528029.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T16:53:49.839Z,1520528029.839 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:53:49.840Z,1520528029.840 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:53:49.840Z,1520528029.840 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T16:53:49.860Z,1520528029.860 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:53:49.861Z,1520528029.861 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:53:49.861Z,1520528029.861 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T16:53:49.862Z,1520528029.862 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:53:49.862Z,1520528029.862 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:53:50.218Z,1520528030.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:50.233Z,1520528030.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-03-08T16:53:50.234Z,1520528030.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:50.618Z,1520528030.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:50.634Z,1520528030.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-03-08T16:53:50.635Z,1520528030.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:51.021Z,1520528031.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:51.035Z,1520528031.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-03-08T16:53:51.037Z,1520528031.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:51.411Z,1520528031.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:51.431Z,1520528031.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-03-08T16:53:51.432Z,1520528031.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:51.818Z,1520528031.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:51.833Z,1520528031.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-03-08T16:53:51.834Z,1520528031.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:52.220Z,1520528032.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:52.234Z,1520528032.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-03-08T16:53:52.235Z,1520528032.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:52.620Z,1520528032.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:52.635Z,1520528032.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-03-08T16:53:52.636Z,1520528032.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:53.017Z,1520528033.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:53.033Z,1520528033.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-08T16:53:53.034Z,1520528033.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:53.420Z,1520528033.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:53.435Z,1520528033.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-03-08T16:53:53.436Z,1520528033.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:53.810Z,1520528033.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:53.839Z,1520528033.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-03-08T16:53:53.840Z,1520528033.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:54.210Z,1520528034.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:54.235Z,1520528034.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-08T16:53:54.236Z,1520528034.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:54.610Z,1520528034.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:54.653Z,1520528034.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-08T16:53:54.654Z,1520528034.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:55.010Z,1520528035.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:55.050Z,1520528035.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T16:53:55.051Z,1520528035.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:55.406Z,1520528035.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:55.430Z,1520528035.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T16:53:55.431Z,1520528035.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:55.810Z,1520528035.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:55.854Z,1520528035.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-08T16:53:55.855Z,1520528035.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:56.210Z,1520528036.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:56.238Z,1520528036.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-08T16:53:56.239Z,1520528036.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:56.618Z,1520528036.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:56.634Z,1520528036.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-08T16:53:56.635Z,1520528036.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:57.028Z,1520528037.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:57.043Z,1520528037.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-08T16:53:57.044Z,1520528037.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:57.394Z,1520528037.394 [NAL9602](INFO): NAL9602 initialized
2018-03-08T16:53:57.417Z,1520528037.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:57.448Z,1520528037.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-08T16:53:57.449Z,1520528037.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:57.822Z,1520528037.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:57.838Z,1520528037.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-08T16:53:57.839Z,1520528037.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:58.233Z,1520528038.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:58.254Z,1520528038.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-08T16:53:58.255Z,1520528038.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:58.631Z,1520528038.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:58.646Z,1520528038.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-08T16:53:58.647Z,1520528038.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:59.034Z,1520528039.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:59.049Z,1520528039.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-08T16:53:59.050Z,1520528039.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:59.422Z,1520528039.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:59.442Z,1520528039.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T16:53:59.443Z,1520528039.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:53:59.817Z,1520528039.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:53:59.832Z,1520528039.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-08T16:53:59.833Z,1520528039.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:00.222Z,1520528040.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:00.239Z,1520528040.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T16:54:00.248Z,1520528040.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:00.621Z,1520528040.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:00.640Z,1520528040.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T16:54:00.641Z,1520528040.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:01.036Z,1520528041.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:01.051Z,1520528041.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T16:54:01.052Z,1520528041.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:01.436Z,1520528041.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:01.451Z,1520528041.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T16:54:01.452Z,1520528041.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:01.830Z,1520528041.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:01.903Z,1520528041.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T16:54:01.904Z,1520528041.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:02.212Z,1520528042.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:02.227Z,1520528042.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-08T16:54:02.227Z,1520528042.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:02.612Z,1520528042.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:02.627Z,1520528042.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-08T16:54:02.628Z,1520528042.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:03.022Z,1520528043.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:03.037Z,1520528043.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-08T16:54:03.038Z,1520528043.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:03.425Z,1520528043.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:03.439Z,1520528043.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-08T16:54:03.440Z,1520528043.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:03.821Z,1520528043.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:03.836Z,1520528043.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-08T16:54:03.837Z,1520528043.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:04.212Z,1520528044.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:04.227Z,1520528044.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T16:54:04.228Z,1520528044.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:04.607Z,1520528044.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:04.622Z,1520528044.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-08T16:54:04.623Z,1520528044.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:05.026Z,1520528045.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:05.041Z,1520528045.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T16:54:05.042Z,1520528045.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:05.438Z,1520528045.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:05.469Z,1520528045.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T16:54:05.470Z,1520528045.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:05.821Z,1520528045.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:05.835Z,1520528045.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T16:54:05.837Z,1520528045.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:06.213Z,1520528046.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:06.228Z,1520528046.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T16:54:06.229Z,1520528046.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:06.607Z,1520528046.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:06.626Z,1520528046.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-08T16:54:06.627Z,1520528046.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:07.021Z,1520528047.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:07.058Z,1520528047.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T16:54:07.058Z,1520528047.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:07.439Z,1520528047.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:07.454Z,1520528047.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-08T16:54:07.455Z,1520528047.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:07.821Z,1520528047.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:07.854Z,1520528047.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-08T16:54:07.855Z,1520528047.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:08.211Z,1520528048.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:08.225Z,1520528048.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T16:54:08.226Z,1520528048.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:08.618Z,1520528048.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:08.649Z,1520528048.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T16:54:08.650Z,1520528048.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:09.025Z,1520528049.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:09.056Z,1520528049.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T16:54:09.057Z,1520528049.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:09.429Z,1520528049.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:09.452Z,1520528049.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:09.830Z,1520528049.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:09.855Z,1520528049.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:10.215Z,1520528050.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:10.254Z,1520528050.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:10.618Z,1520528050.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:10.633Z,1520528050.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:11.029Z,1520528051.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:11.062Z,1520528051.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:11.429Z,1520528051.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:11.461Z,1520528051.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:11.828Z,1520528051.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:11.861Z,1520528051.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:12.219Z,1520528052.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:12.235Z,1520528052.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:12.619Z,1520528052.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:12.659Z,1520528052.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:13.029Z,1520528053.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:13.044Z,1520528053.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:13.429Z,1520528053.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:13.444Z,1520528053.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:13.821Z,1520528053.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:13.837Z,1520528053.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:14.217Z,1520528054.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:14.232Z,1520528054.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:14.619Z,1520528054.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:14.643Z,1520528054.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:15.033Z,1520528055.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:15.066Z,1520528055.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:15.433Z,1520528055.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:15.448Z,1520528055.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:15.833Z,1520528055.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:15.867Z,1520528055.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:16.220Z,1520528056.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:16.235Z,1520528056.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:16.619Z,1520528056.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:16.635Z,1520528056.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:17.022Z,1520528057.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:17.037Z,1520528057.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:17.433Z,1520528057.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:17.467Z,1520528057.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:17.825Z,1520528057.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:17.842Z,1520528057.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:18.222Z,1520528058.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:18.243Z,1520528058.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:18.618Z,1520528058.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:18.633Z,1520528058.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:19.023Z,1520528059.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:19.042Z,1520528059.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:19.429Z,1520528059.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:19.445Z,1520528059.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:19.825Z,1520528059.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:19.841Z,1520528059.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:20.221Z,1520528060.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:20.236Z,1520528060.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:20.623Z,1520528060.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:20.639Z,1520528060.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:21.023Z,1520528061.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:21.043Z,1520528061.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:21.424Z,1520528061.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:21.440Z,1520528061.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:21.825Z,1520528061.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:21.841Z,1520528061.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:22.222Z,1520528062.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:22.243Z,1520528062.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:22.621Z,1520528062.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:22.635Z,1520528062.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:23.025Z,1520528063.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:23.041Z,1520528063.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:23.429Z,1520528063.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:23.445Z,1520528063.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:23.823Z,1520528063.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:23.838Z,1520528063.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:24.223Z,1520528064.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:24.239Z,1520528064.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:24.622Z,1520528064.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:24.637Z,1520528064.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:25.025Z,1520528065.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:25.040Z,1520528065.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:25.425Z,1520528065.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:25.441Z,1520528065.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:25.837Z,1520528065.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:25.869Z,1520528065.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:26.224Z,1520528066.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:26.240Z,1520528066.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:26.623Z,1520528066.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:26.639Z,1520528066.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:27.028Z,1520528067.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:27.044Z,1520528067.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:27.428Z,1520528067.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:27.443Z,1520528067.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:27.829Z,1520528067.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:27.850Z,1520528067.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:28.224Z,1520528068.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:28.239Z,1520528068.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:28.620Z,1520528068.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:28.635Z,1520528068.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:29.026Z,1520528069.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:29.046Z,1520528069.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:29.432Z,1520528069.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:29.454Z,1520528069.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:29.834Z,1520528069.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:29.849Z,1520528069.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:30.219Z,1520528070.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:30.240Z,1520528070.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:30.615Z,1520528070.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:30.638Z,1520528070.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:31.030Z,1520528071.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:31.050Z,1520528071.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:31.430Z,1520528071.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:31.446Z,1520528071.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:31.833Z,1520528071.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:31.854Z,1520528071.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:32.222Z,1520528072.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:32.238Z,1520528072.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:32.623Z,1520528072.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:32.639Z,1520528072.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:33.031Z,1520528073.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:33.047Z,1520528073.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:33.432Z,1520528073.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:33.448Z,1520528073.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:33.830Z,1520528073.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:33.847Z,1520528073.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:34.227Z,1520528074.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:34.244Z,1520528074.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:34.622Z,1520528074.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:34.637Z,1520528074.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:35.030Z,1520528075.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:35.046Z,1520528075.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:35.433Z,1520528075.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:35.455Z,1520528075.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:35.832Z,1520528075.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:35.847Z,1520528075.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:36.230Z,1520528076.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:36.246Z,1520528076.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:36.622Z,1520528076.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:36.643Z,1520528076.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:37.032Z,1520528077.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:37.054Z,1520528077.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:37.429Z,1520528077.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:37.446Z,1520528077.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:37.829Z,1520528077.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:37.844Z,1520528077.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:38.218Z,1520528078.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:38.233Z,1520528078.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:38.624Z,1520528078.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:38.640Z,1520528078.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:39.031Z,1520528079.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:39.047Z,1520528079.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:39.430Z,1520528079.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:39.450Z,1520528079.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:39.825Z,1520528079.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:39.841Z,1520528079.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:40.217Z,1520528080.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:40.237Z,1520528080.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:40.618Z,1520528080.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:40.634Z,1520528080.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:41.029Z,1520528081.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:41.045Z,1520528081.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:41.432Z,1520528081.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:41.455Z,1520528081.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:41.831Z,1520528081.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:41.847Z,1520528081.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:42.223Z,1520528082.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:42.239Z,1520528082.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:42.626Z,1520528082.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:42.643Z,1520528082.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:43.029Z,1520528083.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:43.044Z,1520528083.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:43.430Z,1520528083.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:43.445Z,1520528083.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:43.832Z,1520528083.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:43.854Z,1520528083.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:44.223Z,1520528084.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:44.238Z,1520528084.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:44.622Z,1520528084.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:44.638Z,1520528084.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:45.028Z,1520528085.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:45.044Z,1520528085.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:45.432Z,1520528085.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:45.447Z,1520528085.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:45.828Z,1520528085.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:45.844Z,1520528085.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:46.230Z,1520528086.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:46.251Z,1520528086.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:49.326Z,1520528089.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:49.342Z,1520528089.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:49.450Z,1520528089.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:49.481Z,1520528089.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:49.819Z,1520528089.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:49.834Z,1520528089.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:50.206Z,1520528090.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:50.231Z,1520528090.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:50.594Z,1520528090.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:50.631Z,1520528090.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:50.995Z,1520528090.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:51.010Z,1520528091.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:51.395Z,1520528091.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:51.410Z,1520528091.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:51.797Z,1520528091.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:51.813Z,1520528091.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:52.213Z,1520528092.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:52.235Z,1520528092.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:52.605Z,1520528092.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:52.620Z,1520528092.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:52.996Z,1520528092.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:53.018Z,1520528093.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:53.399Z,1520528093.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:53.414Z,1520528093.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:53.797Z,1520528093.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:53.812Z,1520528093.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:54.197Z,1520528094.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:54.218Z,1520528094.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:54.598Z,1520528094.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:54.613Z,1520528094.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:55.005Z,1520528095.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:55.020Z,1520528095.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:55.398Z,1520528095.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:55.422Z,1520528095.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:55.805Z,1520528095.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:55.827Z,1520528095.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:56.201Z,1520528096.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:56.217Z,1520528096.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:56.603Z,1520528096.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:56.618Z,1520528096.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:57.005Z,1520528097.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:57.021Z,1520528097.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:57.405Z,1520528097.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:57.420Z,1520528097.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:57.804Z,1520528097.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:57.820Z,1520528097.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:58.203Z,1520528098.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:58.218Z,1520528098.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:58.601Z,1520528098.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:58.616Z,1520528098.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:59.004Z,1520528099.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:59.019Z,1520528099.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:59.405Z,1520528099.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:59.421Z,1520528099.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:54:59.809Z,1520528099.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:54:59.824Z,1520528099.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:00.196Z,1520528100.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:00.216Z,1520528100.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:00.595Z,1520528100.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:00.614Z,1520528100.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:01.005Z,1520528101.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:01.020Z,1520528101.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:01.401Z,1520528101.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:01.425Z,1520528101.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:01.810Z,1520528101.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:01.831Z,1520528101.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:02.202Z,1520528102.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:02.217Z,1520528102.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:02.599Z,1520528102.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:02.615Z,1520528102.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:03.008Z,1520528103.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:03.024Z,1520528103.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:03.413Z,1520528103.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:03.427Z,1520528103.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:03.808Z,1520528103.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:03.831Z,1520528103.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:04.192Z,1520528104.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:04.219Z,1520528104.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:04.584Z,1520528104.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:04.615Z,1520528104.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:04.997Z,1520528104.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:05.035Z,1520528105.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:05.414Z,1520528105.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:05.429Z,1520528105.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:05.809Z,1520528105.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:05.833Z,1520528105.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:06.195Z,1520528106.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:06.230Z,1520528106.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:06.594Z,1520528106.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:06.622Z,1520528106.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:07.010Z,1520528107.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:07.025Z,1520528107.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:07.402Z,1520528107.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:07.435Z,1520528107.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:07.812Z,1520528107.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:07.828Z,1520528107.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:08.195Z,1520528108.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:08.222Z,1520528108.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:08.590Z,1520528108.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:08.623Z,1520528108.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:09.014Z,1520528109.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:09.030Z,1520528109.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:09.412Z,1520528109.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:09.429Z,1520528109.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:09.798Z,1520528109.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:09.835Z,1520528109.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:10.192Z,1520528110.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:10.221Z,1520528110.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:10.586Z,1520528110.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:10.622Z,1520528110.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:10.000Z,1520528111.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:11.026Z,1520528111.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:11.401Z,1520528111.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:11.435Z,1520528111.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:11.801Z,1520528111.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:11.827Z,1520528111.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:12.188Z,1520528112.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:12.221Z,1520528112.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:12.596Z,1520528112.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:12.628Z,1520528112.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:13.009Z,1520528113.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:13.033Z,1520528113.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:13.401Z,1520528113.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:13.433Z,1520528113.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:13.805Z,1520528113.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:13.837Z,1520528113.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:14.195Z,1520528114.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:14.215Z,1520528114.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:14.590Z,1520528114.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:14.609Z,1520528114.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:15.005Z,1520528115.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:15.037Z,1520528115.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:15.405Z,1520528115.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:15.419Z,1520528115.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:15.799Z,1520528115.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:15.822Z,1520528115.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:16.194Z,1520528116.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:16.214Z,1520528116.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:16.623Z,1520528116.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:16.650Z,1520528116.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:17.006Z,1520528117.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:17.039Z,1520528117.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:17.406Z,1520528117.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:17.437Z,1520528117.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:17.805Z,1520528117.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:17.836Z,1520528117.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:18.193Z,1520528118.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:18.209Z,1520528118.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:18.592Z,1520528118.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:18.607Z,1520528118.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:19.009Z,1520528119.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:19.040Z,1520528119.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:19.395Z,1520528119.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:19.415Z,1520528119.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:19.809Z,1520528119.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:19.839Z,1520528119.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:20.196Z,1520528120.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:20.211Z,1520528120.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:20.598Z,1520528120.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:20.619Z,1520528120.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:21.013Z,1520528121.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:21.042Z,1520528121.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:21.401Z,1520528121.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:21.422Z,1520528121.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:21.801Z,1520528121.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:21.817Z,1520528121.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:22.197Z,1520528122.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:22.213Z,1520528122.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:22.599Z,1520528122.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:22.614Z,1520528122.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:22.998Z,1520528122.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:23.013Z,1520528123.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:23.409Z,1520528123.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:23.445Z,1520528123.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:23.801Z,1520528123.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:23.816Z,1520528123.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:24.201Z,1520528124.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:24.222Z,1520528124.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:24.599Z,1520528124.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:24.614Z,1520528124.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:25.013Z,1520528125.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:25.049Z,1520528125.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:25.400Z,1520528125.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:25.419Z,1520528125.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:25.804Z,1520528125.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:25.820Z,1520528125.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:26.197Z,1520528126.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:26.212Z,1520528126.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:26.598Z,1520528126.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:26.618Z,1520528126.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:27.008Z,1520528127.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:27.023Z,1520528127.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:27.405Z,1520528127.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:27.420Z,1520528127.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:27.804Z,1520528127.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:27.820Z,1520528127.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:28.199Z,1520528128.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:28.214Z,1520528128.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:28.597Z,1520528128.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:28.627Z,1520528128.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:29.002Z,1520528129.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:29.030Z,1520528129.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:29.412Z,1520528129.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:29.427Z,1520528129.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:29.810Z,1520528129.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:29.825Z,1520528129.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:30.202Z,1520528130.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:30.218Z,1520528130.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:30.602Z,1520528130.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:30.617Z,1520528130.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:31.009Z,1520528131.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:31.025Z,1520528131.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:31.405Z,1520528131.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:31.421Z,1520528131.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:31.811Z,1520528131.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:31.826Z,1520528131.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:32.197Z,1520528132.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:32.218Z,1520528132.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:32.588Z,1520528132.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:32.617Z,1520528132.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:33.015Z,1520528133.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:33.034Z,1520528133.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:33.414Z,1520528133.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:33.434Z,1520528133.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:33.810Z,1520528133.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:33.830Z,1520528133.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:34.199Z,1520528134.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:34.215Z,1520528134.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:34.603Z,1520528134.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:34.619Z,1520528134.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:35.011Z,1520528135.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:35.031Z,1520528135.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:35.412Z,1520528135.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:35.427Z,1520528135.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:35.811Z,1520528135.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:35.835Z,1520528135.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:36.191Z,1520528136.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:36.218Z,1520528136.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:36.587Z,1520528136.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:36.623Z,1520528136.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:37.006Z,1520528137.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:37.021Z,1520528137.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:37.403Z,1520528137.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:37.423Z,1520528137.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:37.812Z,1520528137.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:37.827Z,1520528137.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:38.191Z,1520528138.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:38.223Z,1520528138.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:38.594Z,1520528138.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:38.620Z,1520528138.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:39.009Z,1520528139.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:39.024Z,1520528139.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:39.420Z,1520528139.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:39.435Z,1520528139.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:39.811Z,1520528139.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:39.830Z,1520528139.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:40.194Z,1520528140.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:40.230Z,1520528140.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:40.589Z,1520528140.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:40.623Z,1520528140.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:41.010Z,1520528141.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:41.025Z,1520528141.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:41.412Z,1520528141.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:41.427Z,1520528141.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:41.801Z,1520528141.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:41.833Z,1520528141.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:42.191Z,1520528142.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:42.222Z,1520528142.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:42.586Z,1520528142.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:42.631Z,1520528142.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:43.038Z,1520528143.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:43.054Z,1520528143.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:43.410Z,1520528143.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:43.442Z,1520528143.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:43.812Z,1520528143.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:43.859Z,1520528143.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:44.197Z,1520528144.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:44.229Z,1520528144.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:44.593Z,1520528144.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:44.626Z,1520528144.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:45.014Z,1520528145.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:45.030Z,1520528145.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:45.421Z,1520528145.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:45.437Z,1520528145.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:45.807Z,1520528145.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:45.823Z,1520528145.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:46.195Z,1520528146.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:46.221Z,1520528146.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:46.589Z,1520528146.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:46.616Z,1520528146.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:49.706Z,1520528149.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:49.721Z,1520528149.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:49.842Z,1520528149.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:49.873Z,1520528149.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:50.208Z,1520528150.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:50.223Z,1520528150.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:50.578Z,1520528150.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:50.594Z,1520528150.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:50.979Z,1520528150.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:51.022Z,1520528151.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:51.378Z,1520528151.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:51.416Z,1520528151.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:51.781Z,1520528151.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:51.819Z,1520528151.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:52.193Z,1520528152.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:52.222Z,1520528152.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:52.592Z,1520528152.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:52.616Z,1520528152.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:52.994Z,1520528152.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:53.026Z,1520528153.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:53.385Z,1520528153.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:53.400Z,1520528153.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:53.781Z,1520528153.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:53.796Z,1520528153.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:54.182Z,1520528154.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:54.201Z,1520528154.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:54.582Z,1520528154.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:54.598Z,1520528154.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:54.993Z,1520528154.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:55.008Z,1520528155.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:55.390Z,1520528155.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:55.405Z,1520528155.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:55.787Z,1520528155.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:55.805Z,1520528155.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:56.186Z,1520528156.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:56.201Z,1520528156.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:56.587Z,1520528156.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:56.605Z,1520528156.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:56.985Z,1520528156.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:57.001Z,1520528157.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:57.385Z,1520528157.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:57.414Z,1520528157.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:57.797Z,1520528157.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:57.812Z,1520528157.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:58.187Z,1520528158.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:58.203Z,1520528158.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:58.582Z,1520528158.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:58.597Z,1520528158.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:58.992Z,1520528158.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:59.007Z,1520528159.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:59.396Z,1520528159.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:59.419Z,1520528159.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:55:59.794Z,1520528159.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:55:59.809Z,1520528159.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:00.188Z,1520528160.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:00.203Z,1520528160.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:00.570Z,1520528160.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:00.618Z,1520528160.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:00.998Z,1520528160.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:01.023Z,1520528161.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:01.399Z,1520528161.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:01.414Z,1520528161.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:01.796Z,1520528161.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:01.818Z,1520528161.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:02.187Z,1520528162.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:02.205Z,1520528162.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:02.587Z,1520528162.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:02.610Z,1520528162.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:02.994Z,1520528162.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:03.009Z,1520528163.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:03.396Z,1520528163.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:03.411Z,1520528163.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:03.796Z,1520528163.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:03.811Z,1520528163.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:04.187Z,1520528164.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:04.206Z,1520528164.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:04.585Z,1520528164.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:04.600Z,1520528164.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:04.990Z,1520528164.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:05.017Z,1520528165.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:05.401Z,1520528165.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:05.422Z,1520528165.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:05.798Z,1520528165.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:05.813Z,1520528165.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:06.186Z,1520528166.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:06.202Z,1520528166.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:06.573Z,1520528166.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:06.606Z,1520528166.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:06.992Z,1520528166.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:07.018Z,1520528167.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:07.396Z,1520528167.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:07.412Z,1520528167.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:07.794Z,1520528167.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:07.815Z,1520528167.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:08.186Z,1520528168.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:08.201Z,1520528168.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:08.574Z,1520528168.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:08.606Z,1520528168.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:08.994Z,1520528168.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:09.010Z,1520528169.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:09.398Z,1520528169.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:09.413Z,1520528169.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:09.797Z,1520528169.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:09.818Z,1520528169.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:10.175Z,1520528170.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:10.219Z,1520528170.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:10.576Z,1520528170.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:10.603Z,1520528170.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:10.994Z,1520528170.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:11.014Z,1520528171.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:11.397Z,1520528171.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:11.412Z,1520528171.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:11.792Z,1520528171.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:11.814Z,1520528171.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:12.171Z,1520528172.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:12.209Z,1520528172.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:12.577Z,1520528172.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:12.603Z,1520528172.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:12.994Z,1520528172.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:13.009Z,1520528173.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:13.392Z,1520528173.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:13.415Z,1520528173.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:13.796Z,1520528173.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:13.812Z,1520528173.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:14.173Z,1520528174.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:14.200Z,1520528174.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:14.575Z,1520528174.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:14.602Z,1520528174.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:14.970Z,1520528174.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:15.006Z,1520528175.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:15.392Z,1520528175.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:15.407Z,1520528175.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:15.799Z,1520528175.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:15.820Z,1520528175.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:16.198Z,1520528176.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:16.213Z,1520528176.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:16.571Z,1520528176.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:16.608Z,1520528176.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:16.964Z,1520528176.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:16.996Z,1520528176.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:17.378Z,1520528177.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:17.403Z,1520528177.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:17.773Z,1520528177.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:17.808Z,1520528177.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:18.182Z,1520528178.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:18.222Z,1520528178.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:18.600Z,1520528178.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:18.622Z,1520528178.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:18.996Z,1520528178.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:19.011Z,1520528179.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:19.372Z,1520528179.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:19.400Z,1520528179.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:19.775Z,1520528179.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:19.818Z,1520528179.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:20.179Z,1520528180.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:20.207Z,1520528180.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:20.578Z,1520528180.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:20.610Z,1520528180.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:20.997Z,1520528180.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:21.013Z,1520528181.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:21.397Z,1520528181.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:21.422Z,1520528181.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:21.798Z,1520528181.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:21.818Z,1520528181.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:22.173Z,1520528182.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:22.206Z,1520528182.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:22.576Z,1520528182.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:22.592Z,1520528182.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:22.977Z,1520528182.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:23.015Z,1520528183.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:23.391Z,1520528183.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:23.439Z,1520528183.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:23.786Z,1520528183.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:23.815Z,1520528183.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:24.173Z,1520528184.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:24.188Z,1520528184.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:24.579Z,1520528184.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:24.618Z,1520528184.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:24.982Z,1520528184.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:25.013Z,1520528185.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:25.384Z,1520528185.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:25.421Z,1520528185.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:25.793Z,1520528185.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:25.819Z,1520528185.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:26.194Z,1520528186.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:26.217Z,1520528186.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:26.576Z,1520528186.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:26.614Z,1520528186.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:26.982Z,1520528186.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:26.997Z,1520528186.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:27.383Z,1520528187.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:27.398Z,1520528187.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:27.780Z,1520528187.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:27.822Z,1520528187.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:28.186Z,1520528188.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:28.239Z,1520528188.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:28.585Z,1520528188.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:28.600Z,1520528188.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:28.982Z,1520528188.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:29.007Z,1520528189.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:29.383Z,1520528189.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:29.402Z,1520528189.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:29.782Z,1520528189.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:29.797Z,1520528189.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:30.176Z,1520528190.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:30.200Z,1520528190.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:30.583Z,1520528190.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:30.598Z,1520528190.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:30.979Z,1520528190.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:31.023Z,1520528191.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:31.392Z,1520528191.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:31.434Z,1520528191.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:31.790Z,1520528191.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:31.809Z,1520528191.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:32.189Z,1520528192.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:32.204Z,1520528192.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:32.583Z,1520528192.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:32.606Z,1520528192.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:32.984Z,1520528192.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:32.000Z,1520528193.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:33.384Z,1520528193.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:33.399Z,1520528193.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:33.785Z,1520528193.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:33.801Z,1520528193.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:34.189Z,1520528194.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:34.206Z,1520528194.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:34.592Z,1520528194.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:34.607Z,1520528194.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:34.987Z,1520528194.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:35.011Z,1520528195.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:35.382Z,1520528195.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:35.397Z,1520528195.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:35.779Z,1520528195.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:35.811Z,1520528195.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:36.168Z,1520528196.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:36.218Z,1520528196.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:36.587Z,1520528196.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:36.603Z,1520528196.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:36.983Z,1520528196.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:36.997Z,1520528196.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:37.390Z,1520528197.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:37.406Z,1520528197.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:37.796Z,1520528197.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:37.812Z,1520528197.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:38.195Z,1520528198.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:38.210Z,1520528198.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:38.583Z,1520528198.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:38.598Z,1520528198.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:38.973Z,1520528198.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:39.008Z,1520528199.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:39.384Z,1520528199.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:39.400Z,1520528199.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:39.786Z,1520528199.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:39.806Z,1520528199.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:40.192Z,1520528200.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:40.208Z,1520528200.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:40.596Z,1520528200.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:40.610Z,1520528200.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:40.989Z,1520528200.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:41.015Z,1520528201.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:41.376Z,1520528201.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:41.402Z,1520528201.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:41.774Z,1520528201.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:41.800Z,1520528201.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:42.164Z,1520528202.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:42.203Z,1520528202.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:42.571Z,1520528202.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:42.610Z,1520528202.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:42.976Z,1520528202.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:43.002Z,1520528203.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:43.378Z,1520528203.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:43.411Z,1520528203.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:43.792Z,1520528203.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:43.819Z,1520528203.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:44.188Z,1520528204.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:44.214Z,1520528204.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:44.577Z,1520528204.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:44.613Z,1520528204.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:44.976Z,1520528204.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:44.992Z,1520528204.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:45.376Z,1520528205.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:45.413Z,1520528205.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:45.770Z,1520528205.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:45.814Z,1520528205.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:46.193Z,1520528206.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:46.222Z,1520528206.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:46.593Z,1520528206.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:46.617Z,1520528206.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:46.981Z,1520528206.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:47.016Z,1520528207.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:50.083Z,1520528210.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:50.118Z,1520528210.118 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:50.119Z,1520528210.119 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 184
2018-03-08T16:56:50.119Z,1520528210.119 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T16:56:50.120Z,1520528210.120 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:50.121Z,1520528210.121 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 184
2018-03-08T16:56:50.121Z,1520528210.121 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T16:56:50.122Z,1520528210.122 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:50.122Z,1520528210.122 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 184
2018-03-08T16:56:50.122Z,1520528210.122 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T16:56:50.134Z,1520528210.134 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T16:56:50.135Z,1520528210.135 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T16:56:50.135Z,1520528210.135 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T16:56:50.244Z,1520528210.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:50.293Z,1520528210.293 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T16:56:50.293Z,1520528210.293 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 184
2018-03-08T16:56:50.293Z,1520528210.293 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T16:56:50.294Z,1520528210.294 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 184
2018-03-08T16:56:50.294Z,1520528210.294 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T16:56:50.294Z,1520528210.294 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 184
2018-03-08T16:56:50.598Z,1520528210.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:50.625Z,1520528210.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T16:56:50.625Z,1520528210.625 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:56:50.626Z,1520528210.626 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:56:50.626Z,1520528210.626 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T16:56:50.627Z,1520528210.627 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:56:50.627Z,1520528210.627 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:56:50.627Z,1520528210.627 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T16:56:50.628Z,1520528210.628 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:56:50.628Z,1520528210.628 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:56:50.990Z,1520528210.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:51.018Z,1520528211.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-03-08T16:56:51.019Z,1520528211.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:51.392Z,1520528211.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:51.407Z,1520528211.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-03-08T16:56:51.409Z,1520528211.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:51.773Z,1520528211.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:51.804Z,1520528211.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-03-08T16:56:51.805Z,1520528211.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:52.188Z,1520528212.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:52.208Z,1520528212.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-03-08T16:56:52.209Z,1520528212.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:52.581Z,1520528212.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:52.596Z,1520528212.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-03-08T16:56:52.597Z,1520528212.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:52.993Z,1520528212.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:53.008Z,1520528213.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-03-08T16:56:53.009Z,1520528213.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:53.395Z,1520528213.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:53.414Z,1520528213.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-03-08T16:56:53.415Z,1520528213.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:53.797Z,1520528213.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:53.812Z,1520528213.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-08T16:56:53.813Z,1520528213.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:54.187Z,1520528214.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:54.202Z,1520528214.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-03-08T16:56:54.203Z,1520528214.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:54.585Z,1520528214.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:54.600Z,1520528214.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-03-08T16:56:54.601Z,1520528214.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:54.994Z,1520528214.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:55.014Z,1520528215.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-08T16:56:55.015Z,1520528215.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:55.395Z,1520528215.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:55.410Z,1520528215.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-08T16:56:55.411Z,1520528215.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:55.795Z,1520528215.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:55.814Z,1520528215.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T16:56:55.815Z,1520528215.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:56.186Z,1520528216.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:56.201Z,1520528216.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T16:56:56.202Z,1520528216.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:56.573Z,1520528216.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:56.603Z,1520528216.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-08T16:56:56.604Z,1520528216.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:56.999Z,1520528216.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:57.014Z,1520528217.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-08T16:56:57.015Z,1520528217.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:57.049Z,1520528217.049 [CBIT](INFO): Clearing failed state for component DropWeight
2018-03-08T16:56:57.049Z,1520528217.049 [DropWeight] No Fault, FailCount= 1
2018-03-08T16:56:57.397Z,1520528217.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:57.412Z,1520528217.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-08T16:56:57.413Z,1520528217.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:57.799Z,1520528217.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:57.814Z,1520528217.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-08T16:56:57.815Z,1520528217.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:58.175Z,1520528218.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:58.217Z,1520528218.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-08T16:56:58.218Z,1520528218.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:58.575Z,1520528218.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:58.605Z,1520528218.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-08T16:56:58.606Z,1520528218.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:58.994Z,1520528218.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:59.021Z,1520528219.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-08T16:56:59.022Z,1520528219.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:59.399Z,1520528219.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:59.414Z,1520528219.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-08T16:56:59.414Z,1520528219.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:56:59.800Z,1520528219.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:56:59.815Z,1520528219.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-08T16:56:59.816Z,1520528219.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:00.172Z,1520528220.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:00.213Z,1520528220.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T16:57:00.214Z,1520528220.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:00.579Z,1520528220.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:00.608Z,1520528220.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-08T16:57:00.609Z,1520528220.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:00.975Z,1520528220.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:01.002Z,1520528221.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T16:57:01.003Z,1520528221.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:01.404Z,1520528221.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:01.419Z,1520528221.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T16:57:01.420Z,1520528221.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:01.797Z,1520528221.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:01.817Z,1520528221.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T16:57:01.817Z,1520528221.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:02.192Z,1520528222.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:02.208Z,1520528222.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T16:57:02.209Z,1520528222.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:02.575Z,1520528222.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:02.602Z,1520528222.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T16:57:02.603Z,1520528222.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:02.971Z,1520528222.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:03.010Z,1520528223.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-08T16:57:03.011Z,1520528223.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:03.372Z,1520528223.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:03.403Z,1520528223.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-08T16:57:03.405Z,1520528223.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:03.773Z,1520528223.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:03.806Z,1520528223.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-08T16:57:03.807Z,1520528223.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:04.195Z,1520528224.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:04.209Z,1520528224.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-08T16:57:04.210Z,1520528224.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:04.593Z,1520528224.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:04.619Z,1520528224.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-08T16:57:04.620Z,1520528224.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:04.997Z,1520528224.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:05.012Z,1520528225.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T16:57:05.013Z,1520528225.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:05.377Z,1520528225.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:05.407Z,1520528225.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-08T16:57:05.408Z,1520528225.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:05.774Z,1520528225.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:05.809Z,1520528225.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T16:57:05.810Z,1520528225.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:06.175Z,1520528226.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:06.217Z,1520528226.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T16:57:06.218Z,1520528226.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:06.577Z,1520528226.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:06.607Z,1520528226.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T16:57:06.608Z,1520528226.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:06.986Z,1520528226.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:07.013Z,1520528227.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T16:57:07.014Z,1520528227.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:07.385Z,1520528227.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:07.411Z,1520528227.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-08T16:57:07.412Z,1520528227.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:07.786Z,1520528227.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:07.820Z,1520528227.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T16:57:07.821Z,1520528227.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:08.178Z,1520528228.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:08.214Z,1520528228.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-08T16:57:08.215Z,1520528228.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:08.574Z,1520528228.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:08.601Z,1520528228.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-08T16:57:08.602Z,1520528228.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:08.989Z,1520528228.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:09.015Z,1520528229.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T16:57:09.016Z,1520528229.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:09.387Z,1520528229.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:09.410Z,1520528229.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T16:57:09.411Z,1520528229.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:09.803Z,1520528229.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:09.826Z,1520528229.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T16:57:09.827Z,1520528229.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:10.186Z,1520528230.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:10.230Z,1520528230.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:10.581Z,1520528230.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:10.596Z,1520528230.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:10.990Z,1520528230.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:11.034Z,1520528231.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:11.401Z,1520528231.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:11.454Z,1520528231.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:11.789Z,1520528231.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:11.804Z,1520528231.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:12.182Z,1520528232.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:12.210Z,1520528232.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:12.580Z,1520528232.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:12.611Z,1520528232.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:12.987Z,1520528232.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:13.024Z,1520528233.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:13.388Z,1520528233.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:13.407Z,1520528233.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:13.789Z,1520528233.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:13.810Z,1520528233.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:14.182Z,1520528234.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:14.202Z,1520528234.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:14.585Z,1520528234.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:14.624Z,1520528234.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:14.988Z,1520528234.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:15.003Z,1520528235.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:15.392Z,1520528235.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:15.409Z,1520528235.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:15.795Z,1520528235.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:15.814Z,1520528235.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:16.199Z,1520528236.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:16.213Z,1520528236.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:16.586Z,1520528236.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:16.602Z,1520528236.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:16.977Z,1520528236.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:17.001Z,1520528237.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:17.368Z,1520528237.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:17.398Z,1520528237.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:17.787Z,1520528237.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:17.802Z,1520528237.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:18.196Z,1520528238.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:18.218Z,1520528238.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:18.597Z,1520528238.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:18.611Z,1520528238.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:18.996Z,1520528238.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:19.011Z,1520528239.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:19.387Z,1520528239.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:19.406Z,1520528239.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:19.769Z,1520528239.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:19.798Z,1520528239.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:20.187Z,1520528240.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:20.210Z,1520528240.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:20.584Z,1520528240.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:20.603Z,1520528240.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:20.993Z,1520528240.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:21.025Z,1520528241.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:21.397Z,1520528241.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:21.413Z,1520528241.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:21.793Z,1520528241.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:21.809Z,1520528241.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:22.171Z,1520528242.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:22.208Z,1520528242.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:22.577Z,1520528242.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:22.606Z,1520528242.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:22.993Z,1520528242.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:23.008Z,1520528243.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:23.380Z,1520528243.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:23.406Z,1520528243.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:23.802Z,1520528243.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:23.817Z,1520528243.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:24.171Z,1520528244.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:24.203Z,1520528244.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:24.569Z,1520528244.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:24.603Z,1520528244.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:24.998Z,1520528244.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:25.014Z,1520528245.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:25.390Z,1520528245.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:25.415Z,1520528245.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:25.801Z,1520528245.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:25.816Z,1520528245.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:26.179Z,1520528246.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:26.205Z,1520528246.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:26.574Z,1520528246.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:26.600Z,1520528246.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:26.993Z,1520528246.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:27.017Z,1520528247.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:27.398Z,1520528247.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:27.418Z,1520528247.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:27.798Z,1520528247.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:27.813Z,1520528247.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:28.170Z,1520528248.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:28.202Z,1520528248.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:28.576Z,1520528248.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:28.607Z,1520528248.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:28.971Z,1520528248.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:29.007Z,1520528249.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:29.399Z,1520528249.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:29.414Z,1520528249.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:29.798Z,1520528249.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:29.814Z,1520528249.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:30.182Z,1520528250.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:30.216Z,1520528250.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:30.575Z,1520528250.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:30.618Z,1520528250.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:30.975Z,1520528250.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:30.990Z,1520528250.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:31.378Z,1520528251.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:31.415Z,1520528251.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:31.778Z,1520528251.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:31.815Z,1520528251.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:32.195Z,1520528252.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:32.238Z,1520528252.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:32.589Z,1520528252.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:32.624Z,1520528252.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:32.992Z,1520528252.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:33.026Z,1520528253.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:33.377Z,1520528253.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:33.426Z,1520528253.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:33.777Z,1520528253.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:33.819Z,1520528253.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:34.176Z,1520528254.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:34.212Z,1520528254.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:34.585Z,1520528254.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:34.600Z,1520528254.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:34.980Z,1520528254.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:35.022Z,1520528255.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:35.387Z,1520528255.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:35.422Z,1520528255.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:35.784Z,1520528255.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:35.807Z,1520528255.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:36.190Z,1520528256.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:36.205Z,1520528256.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:36.585Z,1520528256.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:36.604Z,1520528256.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:36.971Z,1520528256.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:36.998Z,1520528256.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:37.390Z,1520528257.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:37.405Z,1520528257.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:37.780Z,1520528257.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:37.796Z,1520528257.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:38.182Z,1520528258.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:38.219Z,1520528258.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:38.591Z,1520528258.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:38.615Z,1520528258.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:38.996Z,1520528258.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:39.012Z,1520528259.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:39.384Z,1520528259.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:39.400Z,1520528259.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:39.775Z,1520528259.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:39.803Z,1520528259.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:40.167Z,1520528260.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:40.207Z,1520528260.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:40.613Z,1520528260.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:40.658Z,1520528260.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:40.986Z,1520528260.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:41.006Z,1520528261.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:41.398Z,1520528261.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:41.418Z,1520528261.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:41.800Z,1520528261.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:41.842Z,1520528261.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:42.193Z,1520528262.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:42.209Z,1520528262.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:42.590Z,1520528262.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:42.606Z,1520528262.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:42.967Z,1520528262.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:43.007Z,1520528263.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:43.397Z,1520528263.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:43.464Z,1520528263.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:43.789Z,1520528263.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:43.825Z,1520528263.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:44.179Z,1520528264.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:44.203Z,1520528264.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:44.595Z,1520528264.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:44.626Z,1520528264.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:44.988Z,1520528264.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:45.003Z,1520528265.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:45.374Z,1520528265.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:45.398Z,1520528265.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:45.786Z,1520528265.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:45.801Z,1520528265.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:46.190Z,1520528266.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:46.231Z,1520528266.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:46.234Z,1520528266.234 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T16:57:46.234Z,1520528266.234 [Default:CheckIn:C.Wait] Stopped
2018-03-08T16:57:46.234Z,1520528266.234 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T16:57:46.234Z,1520528266.234 [Default:CheckIn:D] Running Loop=1
2018-03-08T16:57:46.587Z,1520528266.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:46.602Z,1520528266.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:46.605Z,1520528266.605 [Default:CheckIn:D] Stopped
2018-03-08T16:57:46.605Z,1520528266.605 [Default:CheckIn:E] Running Loop=1
2018-03-08T16:57:46.992Z,1520528266.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:47.023Z,1520528267.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:47.030Z,1520528267.030 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 552.030013 min 
2018-03-08T16:57:47.030Z,1520528267.030 [Default:CheckIn:E] Stopped
2018-03-08T16:57:47.030Z,1520528267.030 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T16:57:47.030Z,1520528267.030 [Default:CheckIn] Stopped
2018-03-08T16:57:47.030Z,1520528267.030 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T16:57:47.031Z,1520528267.031 [Default:CheckIn](INFO): Running loop #54
2018-03-08T16:57:47.031Z,1520528267.031 [Default:CheckIn] Running Loop=54
2018-03-08T16:57:47.031Z,1520528267.031 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T16:57:47.031Z,1520528267.031 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T16:57:47.391Z,1520528267.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:47.405Z,1520528267.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:50.493Z,1520528270.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:50.514Z,1520528270.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:50.609Z,1520528270.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:50.624Z,1520528270.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:51.006Z,1520528271.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:51.026Z,1520528271.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:51.404Z,1520528271.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:51.419Z,1520528271.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:51.805Z,1520528271.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:51.821Z,1520528271.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:52.217Z,1520528272.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:52.248Z,1520528272.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:52.606Z,1520528272.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:52.626Z,1520528272.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:53.018Z,1520528273.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:53.047Z,1520528273.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:53.403Z,1520528273.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:53.418Z,1520528273.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:53.802Z,1520528273.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:53.818Z,1520528273.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:54.203Z,1520528274.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:54.235Z,1520528274.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:54.602Z,1520528274.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:54.619Z,1520528274.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:55.005Z,1520528275.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:55.021Z,1520528275.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:55.426Z,1520528275.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:55.462Z,1520528275.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:55.825Z,1520528275.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:55.854Z,1520528275.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:56.205Z,1520528276.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:56.221Z,1520528276.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:56.604Z,1520528276.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:56.620Z,1520528276.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:57.017Z,1520528277.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:57.032Z,1520528277.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:57.407Z,1520528277.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:57.435Z,1520528277.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:57.818Z,1520528277.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:57.849Z,1520528277.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:58.208Z,1520528278.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:58.223Z,1520528278.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:58.606Z,1520528278.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:58.623Z,1520528278.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:59.014Z,1520528279.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:59.029Z,1520528279.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:59.412Z,1520528279.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:59.427Z,1520528279.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:57:59.812Z,1520528279.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:57:59.828Z,1520528279.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:00.204Z,1520528280.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:00.219Z,1520528280.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:00.608Z,1520528280.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:00.623Z,1520528280.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:01.012Z,1520528281.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:01.027Z,1520528281.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:01.413Z,1520528281.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:01.428Z,1520528281.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:01.812Z,1520528281.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:01.834Z,1520528281.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:02.211Z,1520528282.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:02.227Z,1520528282.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:02.608Z,1520528282.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:02.625Z,1520528282.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:03.013Z,1520528283.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:03.028Z,1520528283.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:03.412Z,1520528283.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:03.427Z,1520528283.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:03.812Z,1520528283.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:03.831Z,1520528283.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:04.214Z,1520528284.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:04.229Z,1520528284.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:04.603Z,1520528284.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:04.622Z,1520528284.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:05.013Z,1520528285.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:05.028Z,1520528285.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:05.417Z,1520528285.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:05.432Z,1520528285.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:05.806Z,1520528285.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:05.833Z,1520528285.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:06.208Z,1520528286.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:06.224Z,1520528286.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:06.595Z,1520528286.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:06.627Z,1520528286.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:07.006Z,1520528287.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:07.033Z,1520528287.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:07.422Z,1520528287.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:07.437Z,1520528287.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:07.818Z,1520528287.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:07.833Z,1520528287.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:08.196Z,1520528288.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:08.231Z,1520528288.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:08.597Z,1520528288.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:08.623Z,1520528288.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:09.018Z,1520528289.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:09.033Z,1520528289.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:09.421Z,1520528289.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:09.438Z,1520528289.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:09.813Z,1520528289.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:09.829Z,1520528289.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:10.216Z,1520528290.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:10.234Z,1520528290.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:10.597Z,1520528290.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:10.624Z,1520528290.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:11.017Z,1520528291.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:11.033Z,1520528291.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:11.420Z,1520528291.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:11.434Z,1520528291.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:11.806Z,1520528291.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:11.843Z,1520528291.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:12.202Z,1520528292.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:12.230Z,1520528292.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:12.595Z,1520528292.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:12.633Z,1520528292.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:13.006Z,1520528293.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:13.043Z,1520528293.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:13.410Z,1520528293.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:13.442Z,1520528293.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:13.821Z,1520528293.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:13.848Z,1520528293.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:14.199Z,1520528294.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:14.224Z,1520528294.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:14.598Z,1520528294.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:14.615Z,1520528294.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:15.018Z,1520528295.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:15.043Z,1520528295.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:15.406Z,1520528295.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:15.430Z,1520528295.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:15.814Z,1520528295.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:15.846Z,1520528295.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:16.207Z,1520528296.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:16.223Z,1520528296.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:16.599Z,1520528296.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:16.615Z,1520528296.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:17.014Z,1520528297.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:17.042Z,1520528297.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:17.417Z,1520528297.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:17.497Z,1520528297.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:17.801Z,1520528297.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:17.817Z,1520528297.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:18.210Z,1520528298.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:18.241Z,1520528298.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:18.605Z,1520528298.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:18.626Z,1520528298.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:19.005Z,1520528299.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:19.022Z,1520528299.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:19.421Z,1520528299.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:19.445Z,1520528299.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:19.817Z,1520528299.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:19.846Z,1520528299.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:20.200Z,1520528300.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:20.259Z,1520528300.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:20.609Z,1520528300.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:20.624Z,1520528300.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:21.017Z,1520528301.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:21.032Z,1520528301.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:21.408Z,1520528301.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:21.427Z,1520528301.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:21.811Z,1520528301.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:21.826Z,1520528301.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:22.209Z,1520528302.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:22.223Z,1520528302.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:22.606Z,1520528302.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:22.621Z,1520528302.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:23.014Z,1520528303.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:23.030Z,1520528303.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:23.413Z,1520528303.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:23.428Z,1520528303.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:23.808Z,1520528303.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:23.825Z,1520528303.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:24.204Z,1520528304.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:24.220Z,1520528304.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:24.605Z,1520528304.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:24.620Z,1520528304.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:25.005Z,1520528305.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:25.035Z,1520528305.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:25.413Z,1520528305.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:25.435Z,1520528305.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:25.813Z,1520528305.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:25.830Z,1520528305.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:26.211Z,1520528306.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:26.227Z,1520528306.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:26.604Z,1520528306.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:26.628Z,1520528306.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:27.017Z,1520528307.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:27.038Z,1520528307.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:27.410Z,1520528307.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:27.425Z,1520528307.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:27.816Z,1520528307.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:27.831Z,1520528307.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:28.210Z,1520528308.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:28.224Z,1520528308.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:28.592Z,1520528308.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:28.623Z,1520528308.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:29.017Z,1520528309.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:29.032Z,1520528309.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:29.417Z,1520528309.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:29.432Z,1520528309.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:29.816Z,1520528309.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:29.832Z,1520528309.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:30.208Z,1520528310.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:30.223Z,1520528310.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:30.603Z,1520528310.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:30.618Z,1520528310.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:31.006Z,1520528311.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:31.033Z,1520528311.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:31.420Z,1520528311.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:31.435Z,1520528311.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:31.821Z,1520528311.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:31.842Z,1520528311.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:32.208Z,1520528312.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:32.230Z,1520528312.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:32.605Z,1520528312.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:32.623Z,1520528312.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:33.021Z,1520528313.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:33.042Z,1520528313.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:33.414Z,1520528313.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:33.429Z,1520528313.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:33.814Z,1520528313.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:33.829Z,1520528313.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:34.213Z,1520528314.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:34.228Z,1520528314.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:34.609Z,1520528314.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:34.624Z,1520528314.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:35.021Z,1520528315.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:35.036Z,1520528315.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:35.421Z,1520528315.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:35.439Z,1520528315.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:35.817Z,1520528315.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:35.832Z,1520528315.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:36.205Z,1520528316.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:36.226Z,1520528316.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:36.600Z,1520528316.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:36.615Z,1520528316.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:37.009Z,1520528317.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:37.041Z,1520528317.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:37.443Z,1520528317.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:37.467Z,1520528317.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:37.832Z,1520528317.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:37.854Z,1520528317.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:38.203Z,1520528318.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:38.220Z,1520528318.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:38.602Z,1520528318.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:38.617Z,1520528318.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:39.021Z,1520528319.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:39.045Z,1520528319.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:39.417Z,1520528319.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:39.447Z,1520528319.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:39.817Z,1520528319.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:39.847Z,1520528319.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:40.202Z,1520528320.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:40.230Z,1520528320.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:40.597Z,1520528320.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:40.623Z,1520528320.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:41.013Z,1520528321.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:41.029Z,1520528321.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:41.413Z,1520528321.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:41.428Z,1520528321.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:41.808Z,1520528321.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:41.826Z,1520528321.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:42.200Z,1520528322.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:42.228Z,1520528322.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:42.619Z,1520528322.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:42.634Z,1520528322.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:43.014Z,1520528323.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:43.029Z,1520528323.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:43.417Z,1520528323.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:43.433Z,1520528323.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:43.818Z,1520528323.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:43.833Z,1520528323.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:44.203Z,1520528324.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:44.222Z,1520528324.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:44.610Z,1520528324.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:44.630Z,1520528324.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:45.017Z,1520528325.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:45.038Z,1520528325.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:45.416Z,1520528325.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:45.432Z,1520528325.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:45.817Z,1520528325.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:45.832Z,1520528325.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:46.209Z,1520528326.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:46.225Z,1520528326.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:46.603Z,1520528326.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:46.622Z,1520528326.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:47.012Z,1520528327.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:47.051Z,1520528327.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:47.421Z,1520528327.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:47.436Z,1520528327.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:50.518Z,1520528330.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:50.539Z,1520528330.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:50.633Z,1520528330.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:50.648Z,1520528330.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:51.024Z,1520528331.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:51.040Z,1520528331.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:51.423Z,1520528331.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:51.439Z,1520528331.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:51.826Z,1520528331.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:51.842Z,1520528331.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:52.249Z,1520528332.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:52.276Z,1520528332.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:52.637Z,1520528332.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:52.669Z,1520528332.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:53.030Z,1520528333.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:53.050Z,1520528333.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:53.425Z,1520528333.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:53.440Z,1520528333.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:53.818Z,1520528333.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:53.838Z,1520528333.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:54.225Z,1520528334.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:54.240Z,1520528334.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:54.621Z,1520528334.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:54.637Z,1520528334.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:55.028Z,1520528335.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:55.044Z,1520528335.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:55.429Z,1520528335.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:55.450Z,1520528335.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:55.850Z,1520528335.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:55.874Z,1520528335.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:56.215Z,1520528336.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:56.234Z,1520528336.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:56.623Z,1520528336.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:56.647Z,1520528336.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:57.024Z,1520528337.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:57.039Z,1520528337.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:57.420Z,1520528337.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:57.443Z,1520528337.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:57.823Z,1520528337.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:57.838Z,1520528337.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:58.234Z,1520528338.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:58.249Z,1520528338.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:58.633Z,1520528338.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:58.655Z,1520528338.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:59.032Z,1520528339.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:59.048Z,1520528339.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:59.425Z,1520528339.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:59.440Z,1520528339.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:58:59.824Z,1520528339.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:58:59.846Z,1520528339.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:00.225Z,1520528340.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:00.241Z,1520528340.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:00.619Z,1520528340.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:00.642Z,1520528340.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:01.030Z,1520528341.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:01.045Z,1520528341.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:01.433Z,1520528341.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:01.449Z,1520528341.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:01.833Z,1520528341.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:01.848Z,1520528341.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:02.225Z,1520528342.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:02.241Z,1520528342.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:02.617Z,1520528342.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:02.643Z,1520528342.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:03.034Z,1520528343.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:03.050Z,1520528343.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:03.436Z,1520528343.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:03.455Z,1520528343.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:03.830Z,1520528343.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:03.845Z,1520528343.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:04.212Z,1520528344.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:04.239Z,1520528344.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:04.622Z,1520528344.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:04.651Z,1520528344.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:05.030Z,1520528345.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:05.045Z,1520528345.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:05.433Z,1520528345.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:05.454Z,1520528345.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:05.829Z,1520528345.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:05.891Z,1520528345.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:06.214Z,1520528346.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:06.249Z,1520528346.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:06.619Z,1520528346.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:06.661Z,1520528346.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:07.023Z,1520528347.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:07.063Z,1520528347.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:07.427Z,1520528347.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:07.461Z,1520528347.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:07.828Z,1520528347.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:07.855Z,1520528347.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:08.212Z,1520528348.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:08.228Z,1520528348.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:08.618Z,1520528348.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:08.635Z,1520528348.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:09.030Z,1520528349.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:09.062Z,1520528349.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:09.429Z,1520528349.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:09.459Z,1520528349.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:09.829Z,1520528349.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:09.865Z,1520528349.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:10.220Z,1520528350.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:10.235Z,1520528350.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:10.616Z,1520528350.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:10.632Z,1520528350.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:11.034Z,1520528351.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:11.063Z,1520528351.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:11.433Z,1520528351.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:11.464Z,1520528351.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:11.829Z,1520528351.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:11.862Z,1520528351.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:12.221Z,1520528352.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:12.237Z,1520528352.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:12.620Z,1520528352.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:12.635Z,1520528352.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:13.029Z,1520528353.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:13.065Z,1520528353.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:13.433Z,1520528353.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:13.448Z,1520528353.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:13.826Z,1520528353.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:13.841Z,1520528353.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:14.223Z,1520528354.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:14.242Z,1520528354.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:14.623Z,1520528354.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:14.638Z,1520528354.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:15.025Z,1520528355.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:15.040Z,1520528355.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:15.429Z,1520528355.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:15.445Z,1520528355.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:15.838Z,1520528355.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:15.871Z,1520528355.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:16.225Z,1520528356.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:16.240Z,1520528356.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:16.621Z,1520528356.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:16.636Z,1520528356.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:17.024Z,1520528357.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:17.039Z,1520528357.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:17.424Z,1520528357.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:17.439Z,1520528357.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:17.825Z,1520528357.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:17.841Z,1520528357.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:18.223Z,1520528358.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:18.242Z,1520528358.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:18.623Z,1520528358.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:18.638Z,1520528358.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:19.025Z,1520528359.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:19.041Z,1520528359.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:19.429Z,1520528359.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:19.445Z,1520528359.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:19.825Z,1520528359.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:19.846Z,1520528359.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:20.223Z,1520528360.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:20.242Z,1520528360.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:20.622Z,1520528360.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:20.642Z,1520528360.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:21.025Z,1520528361.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:21.040Z,1520528361.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:21.429Z,1520528361.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:21.445Z,1520528361.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:21.825Z,1520528361.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:21.841Z,1520528361.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:22.223Z,1520528362.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:22.238Z,1520528362.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:22.622Z,1520528362.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:22.637Z,1520528362.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:23.024Z,1520528363.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:23.046Z,1520528363.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:23.428Z,1520528363.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:23.443Z,1520528363.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:23.825Z,1520528363.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:23.841Z,1520528363.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:24.223Z,1520528364.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:24.239Z,1520528364.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:24.619Z,1520528364.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:24.642Z,1520528364.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:25.025Z,1520528365.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:25.046Z,1520528365.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:25.430Z,1520528365.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:25.445Z,1520528365.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:25.825Z,1520528365.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:25.846Z,1520528365.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:26.221Z,1520528366.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:26.237Z,1520528366.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:26.619Z,1520528366.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:26.634Z,1520528366.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:27.026Z,1520528367.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:27.041Z,1520528367.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:27.429Z,1520528367.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:27.446Z,1520528367.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:27.825Z,1520528367.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:27.841Z,1520528367.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:28.222Z,1520528368.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:28.237Z,1520528368.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:28.619Z,1520528368.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:28.635Z,1520528368.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:29.025Z,1520528369.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:29.041Z,1520528369.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:29.426Z,1520528369.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:29.441Z,1520528369.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:29.824Z,1520528369.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:29.846Z,1520528369.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:30.227Z,1520528370.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:30.242Z,1520528370.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:30.622Z,1520528370.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:30.637Z,1520528370.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:31.026Z,1520528371.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:31.047Z,1520528371.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:31.426Z,1520528371.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:31.446Z,1520528371.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:31.826Z,1520528371.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:31.841Z,1520528371.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:32.223Z,1520528372.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:32.239Z,1520528372.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:32.622Z,1520528372.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:32.638Z,1520528372.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:33.026Z,1520528373.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:33.042Z,1520528373.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:33.425Z,1520528373.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:33.446Z,1520528373.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:33.825Z,1520528373.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:33.841Z,1520528373.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:34.220Z,1520528374.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:34.235Z,1520528374.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:34.612Z,1520528374.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:34.640Z,1520528374.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:35.030Z,1520528375.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:35.045Z,1520528375.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:35.429Z,1520528375.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:35.444Z,1520528375.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:35.829Z,1520528375.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:35.850Z,1520528375.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:36.227Z,1520528376.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:36.246Z,1520528376.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:36.620Z,1520528376.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:36.635Z,1520528376.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:37.029Z,1520528377.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:37.045Z,1520528377.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:37.428Z,1520528377.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:37.443Z,1520528377.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:37.830Z,1520528377.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:37.845Z,1520528377.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:38.225Z,1520528378.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:38.240Z,1520528378.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:38.624Z,1520528378.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:38.639Z,1520528378.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:39.030Z,1520528379.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:39.045Z,1520528379.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:39.430Z,1520528379.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:39.446Z,1520528379.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:39.831Z,1520528379.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:39.846Z,1520528379.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:40.225Z,1520528380.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:40.240Z,1520528380.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:40.623Z,1520528380.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:40.647Z,1520528380.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:41.028Z,1520528381.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:41.050Z,1520528381.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:41.429Z,1520528381.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:41.444Z,1520528381.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:41.828Z,1520528381.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:41.844Z,1520528381.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:42.222Z,1520528382.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:42.243Z,1520528382.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:42.624Z,1520528382.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:42.639Z,1520528382.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:43.029Z,1520528383.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:43.044Z,1520528383.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:43.429Z,1520528383.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:43.445Z,1520528383.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:43.829Z,1520528383.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:43.844Z,1520528383.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:44.219Z,1520528384.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:44.235Z,1520528384.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:44.627Z,1520528384.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:44.646Z,1520528384.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:45.029Z,1520528385.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:45.044Z,1520528385.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:45.429Z,1520528385.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:45.444Z,1520528385.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:45.829Z,1520528385.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:45.845Z,1520528385.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:46.221Z,1520528386.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:46.236Z,1520528386.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:46.623Z,1520528386.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:46.638Z,1520528386.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:47.028Z,1520528387.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:47.044Z,1520528387.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:47.430Z,1520528387.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:47.445Z,1520528387.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:50.546Z,1520528390.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:50.579Z,1520528390.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:50.678Z,1520528390.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:50.694Z,1520528390.694 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:50.694Z,1520528390.694 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 185
2018-03-08T16:59:50.694Z,1520528390.694 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T16:59:50.696Z,1520528390.696 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:50.696Z,1520528390.696 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 185
2018-03-08T16:59:50.696Z,1520528390.696 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T16:59:50.698Z,1520528390.698 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:50.698Z,1520528390.698 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 185
2018-03-08T16:59:50.698Z,1520528390.698 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T16:59:50.735Z,1520528390.735 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T16:59:50.735Z,1520528390.735 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T16:59:50.736Z,1520528390.736 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T16:59:51.039Z,1520528391.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:51.085Z,1520528391.085 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T16:59:51.085Z,1520528391.085 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 185
2018-03-08T16:59:51.085Z,1520528391.085 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T16:59:51.086Z,1520528391.086 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 185
2018-03-08T16:59:51.086Z,1520528391.086 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T16:59:51.086Z,1520528391.086 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 185
2018-03-08T16:59:51.434Z,1520528391.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:51.450Z,1520528391.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T16:59:51.450Z,1520528391.450 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:59:51.450Z,1520528391.450 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:59:51.451Z,1520528391.451 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T16:59:51.451Z,1520528391.451 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:59:51.451Z,1520528391.451 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:59:51.452Z,1520528391.452 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T16:59:51.452Z,1520528391.452 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T16:59:51.453Z,1520528391.453 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T16:59:51.844Z,1520528391.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:51.859Z,1520528391.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T16:59:51.860Z,1520528391.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:52.241Z,1520528392.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:52.256Z,1520528392.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T16:59:52.257Z,1520528392.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:52.645Z,1520528392.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:52.660Z,1520528392.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T16:59:52.661Z,1520528392.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:53.040Z,1520528393.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:53.055Z,1520528393.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T16:59:53.056Z,1520528393.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:53.435Z,1520528393.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:53.450Z,1520528393.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T16:59:53.451Z,1520528393.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:53.831Z,1520528393.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:53.850Z,1520528393.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T16:59:53.851Z,1520528393.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:54.237Z,1520528394.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:54.251Z,1520528394.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T16:59:54.253Z,1520528394.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:54.635Z,1520528394.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:54.657Z,1520528394.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T16:59:54.658Z,1520528394.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:55.040Z,1520528395.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:55.055Z,1520528395.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T16:59:55.056Z,1520528395.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:55.445Z,1520528395.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:55.460Z,1520528395.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T16:59:55.461Z,1520528395.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:55.845Z,1520528395.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:55.859Z,1520528395.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T16:59:55.860Z,1520528395.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:56.235Z,1520528396.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:56.250Z,1520528396.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T16:59:56.251Z,1520528396.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:56.638Z,1520528396.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:56.653Z,1520528396.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T16:59:56.654Z,1520528396.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:57.033Z,1520528397.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:57.060Z,1520528397.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T16:59:57.061Z,1520528397.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:57.439Z,1520528397.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:57.454Z,1520528397.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T16:59:57.455Z,1520528397.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:57.835Z,1520528397.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:57.850Z,1520528397.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T16:59:57.851Z,1520528397.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:58.242Z,1520528398.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:58.262Z,1520528398.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T16:59:58.263Z,1520528398.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:58.640Z,1520528398.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:58.655Z,1520528398.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T16:59:58.656Z,1520528398.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:59.042Z,1520528399.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:59.057Z,1520528399.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T16:59:59.058Z,1520528399.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:59.440Z,1520528399.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:59.455Z,1520528399.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T16:59:59.456Z,1520528399.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T16:59:59.831Z,1520528399.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T16:59:59.862Z,1520528399.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T16:59:59.863Z,1520528399.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:00.239Z,1520528400.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:00.258Z,1520528400.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T17:00:00.259Z,1520528400.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:00.636Z,1520528400.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:00.651Z,1520528400.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T17:00:00.652Z,1520528400.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:01.041Z,1520528401.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:01.062Z,1520528401.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T17:00:01.063Z,1520528401.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:01.445Z,1520528401.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:01.460Z,1520528401.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T17:00:01.461Z,1520528401.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:01.841Z,1520528401.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:01.856Z,1520528401.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T17:00:01.857Z,1520528401.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:02.239Z,1520528402.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:02.258Z,1520528402.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T17:00:02.259Z,1520528402.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:02.637Z,1520528402.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:02.658Z,1520528402.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T17:00:02.659Z,1520528402.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:03.046Z,1520528403.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:03.066Z,1520528403.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T17:00:03.067Z,1520528403.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:03.443Z,1520528403.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:03.466Z,1520528403.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T17:00:03.467Z,1520528403.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:03.844Z,1520528403.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:03.859Z,1520528403.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T17:00:03.860Z,1520528403.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:04.234Z,1520528404.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:04.254Z,1520528404.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T17:00:04.255Z,1520528404.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:04.634Z,1520528404.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:04.652Z,1520528404.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T17:00:04.653Z,1520528404.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:05.044Z,1520528405.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:05.059Z,1520528405.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T17:00:05.060Z,1520528405.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:05.437Z,1520528405.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:05.452Z,1520528405.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T17:00:05.453Z,1520528405.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:05.831Z,1520528405.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:05.850Z,1520528405.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T17:00:05.851Z,1520528405.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:06.245Z,1520528406.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:06.260Z,1520528406.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T17:00:06.261Z,1520528406.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:06.649Z,1520528406.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:06.664Z,1520528406.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T17:00:06.665Z,1520528406.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:07.049Z,1520528407.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:07.064Z,1520528407.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T17:00:07.065Z,1520528407.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:07.435Z,1520528407.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:07.454Z,1520528407.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T17:00:07.455Z,1520528407.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:07.833Z,1520528407.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:07.855Z,1520528407.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T17:00:07.856Z,1520528407.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:08.234Z,1520528408.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:08.255Z,1520528408.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T17:00:08.256Z,1520528408.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:08.634Z,1520528408.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:08.655Z,1520528408.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T17:00:08.655Z,1520528408.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:09.048Z,1520528409.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:09.067Z,1520528409.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T17:00:09.068Z,1520528409.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:09.448Z,1520528409.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:09.467Z,1520528409.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T17:00:09.468Z,1520528409.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:09.849Z,1520528409.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:09.871Z,1520528409.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T17:00:09.872Z,1520528409.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:10.237Z,1520528410.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:10.253Z,1520528410.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T17:00:10.253Z,1520528410.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:10.634Z,1520528410.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:10.656Z,1520528410.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T17:00:10.657Z,1520528410.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:11.038Z,1520528411.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:11.065Z,1520528411.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:11.454Z,1520528411.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:11.475Z,1520528411.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:11.841Z,1520528411.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:11.862Z,1520528411.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:12.239Z,1520528412.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:12.254Z,1520528412.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:12.640Z,1520528412.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:12.657Z,1520528412.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:13.041Z,1520528413.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:13.057Z,1520528413.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:13.446Z,1520528413.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:13.461Z,1520528413.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:13.846Z,1520528413.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:13.861Z,1520528413.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:14.235Z,1520528414.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:14.251Z,1520528414.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:14.630Z,1520528414.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:14.646Z,1520528414.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:15.033Z,1520528415.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:15.058Z,1520528415.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:15.442Z,1520528415.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:15.458Z,1520528415.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:15.838Z,1520528415.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:15.854Z,1520528415.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:16.250Z,1520528416.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:16.265Z,1520528416.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:16.648Z,1520528416.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:16.664Z,1520528416.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:17.049Z,1520528417.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:17.064Z,1520528417.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:17.438Z,1520528417.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:17.454Z,1520528417.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:17.843Z,1520528417.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:17.858Z,1520528417.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:18.237Z,1520528418.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:18.252Z,1520528418.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:18.633Z,1520528418.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:18.657Z,1520528418.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:19.050Z,1520528419.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:19.065Z,1520528419.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:19.445Z,1520528419.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:19.462Z,1520528419.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:19.854Z,1520528419.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:19.869Z,1520528419.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:20.238Z,1520528420.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:20.258Z,1520528420.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:20.626Z,1520528420.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:20.663Z,1520528420.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:21.027Z,1520528421.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:21.067Z,1520528421.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:21.440Z,1520528421.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:21.456Z,1520528421.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:21.826Z,1520528421.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:21.861Z,1520528421.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:22.254Z,1520528422.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:22.275Z,1520528422.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:22.652Z,1520528422.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:22.668Z,1520528422.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:23.050Z,1520528423.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:23.066Z,1520528423.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:23.427Z,1520528423.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:23.459Z,1520528423.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:23.831Z,1520528423.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:23.858Z,1520528423.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:24.227Z,1520528424.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:24.259Z,1520528424.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:24.631Z,1520528424.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:24.658Z,1520528424.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:25.050Z,1520528425.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:25.065Z,1520528425.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:25.445Z,1520528425.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:25.463Z,1520528425.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:25.848Z,1520528425.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:25.871Z,1520528425.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:26.227Z,1520528426.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:26.267Z,1520528426.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:26.630Z,1520528426.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:26.657Z,1520528426.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:27.051Z,1520528427.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:27.066Z,1520528427.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:27.447Z,1520528427.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:27.474Z,1520528427.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:27.840Z,1520528427.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:27.867Z,1520528427.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:28.236Z,1520528428.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:28.267Z,1520528428.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:28.631Z,1520528428.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:28.651Z,1520528428.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:29.046Z,1520528429.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:29.078Z,1520528429.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:29.453Z,1520528429.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:29.482Z,1520528429.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:29.846Z,1520528429.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:29.876Z,1520528429.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:30.231Z,1520528430.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:30.247Z,1520528430.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:30.632Z,1520528430.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:30.648Z,1520528430.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:31.031Z,1520528431.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:31.047Z,1520528431.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:31.435Z,1520528431.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:31.451Z,1520528431.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:31.835Z,1520528431.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:31.851Z,1520528431.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:32.245Z,1520528432.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:32.273Z,1520528432.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:32.645Z,1520528432.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:32.668Z,1520528432.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:33.045Z,1520528433.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:33.077Z,1520528433.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:33.436Z,1520528433.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:33.451Z,1520528433.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:33.835Z,1520528433.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:33.852Z,1520528433.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:34.236Z,1520528434.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:34.251Z,1520528434.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:34.636Z,1520528434.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:34.652Z,1520528434.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:35.049Z,1520528435.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:35.081Z,1520528435.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:35.445Z,1520528435.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:35.461Z,1520528435.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:35.840Z,1520528435.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:35.863Z,1520528435.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:36.238Z,1520528436.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:36.254Z,1520528436.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:36.636Z,1520528436.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:36.652Z,1520528436.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:37.041Z,1520528437.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:37.056Z,1520528437.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:37.441Z,1520528437.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:37.457Z,1520528437.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:37.845Z,1520528437.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:37.861Z,1520528437.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:38.238Z,1520528438.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:38.253Z,1520528438.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:38.637Z,1520528438.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:38.654Z,1520528438.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:39.034Z,1520528439.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:39.054Z,1520528439.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:39.439Z,1520528439.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:39.455Z,1520528439.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:39.837Z,1520528439.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:39.853Z,1520528439.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:40.241Z,1520528440.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:40.263Z,1520528440.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:40.643Z,1520528440.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:40.671Z,1520528440.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:41.044Z,1520528441.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:41.059Z,1520528441.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:41.441Z,1520528441.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:41.457Z,1520528441.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:41.839Z,1520528441.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:41.854Z,1520528441.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:42.240Z,1520528442.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:42.255Z,1520528442.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:42.639Z,1520528442.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:42.655Z,1520528442.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:43.044Z,1520528443.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:43.066Z,1520528443.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:43.446Z,1520528443.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:43.461Z,1520528443.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:43.845Z,1520528443.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:43.860Z,1520528443.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:44.239Z,1520528444.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:44.262Z,1520528444.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:44.638Z,1520528444.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:44.654Z,1520528444.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:45.040Z,1520528445.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:45.055Z,1520528445.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:45.439Z,1520528445.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:45.455Z,1520528445.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:45.838Z,1520528445.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:45.854Z,1520528445.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:46.246Z,1520528446.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:46.261Z,1520528446.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:46.645Z,1520528446.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:46.661Z,1520528446.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:47.046Z,1520528447.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:47.061Z,1520528447.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:47.441Z,1520528447.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:47.456Z,1520528447.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:50.519Z,1520528450.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:50.543Z,1520528450.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:50.642Z,1520528450.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:50.671Z,1520528450.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:51.010Z,1520528451.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:51.026Z,1520528451.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:51.409Z,1520528451.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:51.425Z,1520528451.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:51.814Z,1520528451.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:51.831Z,1520528451.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:52.205Z,1520528452.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:52.220Z,1520528452.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:52.604Z,1520528452.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:52.619Z,1520528452.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:53.002Z,1520528453.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:53.025Z,1520528453.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:53.429Z,1520528453.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:53.458Z,1520528453.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:53.813Z,1520528453.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:53.828Z,1520528453.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:54.205Z,1520528454.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:54.220Z,1520528454.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:54.607Z,1520528454.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:54.630Z,1520528454.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:55.016Z,1520528455.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:55.038Z,1520528455.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:55.401Z,1520528455.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:55.425Z,1520528455.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:55.813Z,1520528455.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:55.834Z,1520528455.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:56.205Z,1520528456.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:56.219Z,1520528456.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:56.607Z,1520528456.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:56.627Z,1520528456.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:57.012Z,1520528457.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:57.027Z,1520528457.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:57.413Z,1520528457.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:57.428Z,1520528457.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:57.813Z,1520528457.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:57.835Z,1520528457.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:58.215Z,1520528458.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:58.234Z,1520528458.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:58.607Z,1520528458.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:58.622Z,1520528458.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:59.006Z,1520528459.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:59.033Z,1520528459.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:59.417Z,1520528459.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:59.432Z,1520528459.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:00:59.816Z,1520528459.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:00:59.831Z,1520528459.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:00.206Z,1520528460.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:00.226Z,1520528460.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:00.608Z,1520528460.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:00.624Z,1520528460.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:01.014Z,1520528461.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:01.029Z,1520528461.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:01.410Z,1520528461.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:01.430Z,1520528461.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:01.813Z,1520528461.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:01.829Z,1520528461.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:02.195Z,1520528462.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:02.222Z,1520528462.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:02.594Z,1520528462.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:02.621Z,1520528462.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:03.011Z,1520528463.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:03.027Z,1520528463.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:03.418Z,1520528463.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:03.433Z,1520528463.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:03.813Z,1520528463.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:03.829Z,1520528463.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:04.196Z,1520528464.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:04.222Z,1520528464.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:04.593Z,1520528464.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:04.620Z,1520528464.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:05.001Z,1520528465.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:05.023Z,1520528465.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:05.420Z,1520528465.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:05.436Z,1520528465.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:05.814Z,1520528465.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:05.829Z,1520528465.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:06.207Z,1520528466.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:06.223Z,1520528466.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:06.594Z,1520528466.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:06.627Z,1520528466.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:07.013Z,1520528467.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:07.029Z,1520528467.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:07.407Z,1520528467.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:07.426Z,1520528467.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:07.814Z,1520528467.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:07.829Z,1520528467.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:08.196Z,1520528468.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:08.222Z,1520528468.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:08.594Z,1520528468.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:08.621Z,1520528468.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:09.017Z,1520528469.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:09.032Z,1520528469.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:09.415Z,1520528469.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:09.434Z,1520528469.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:09.817Z,1520528469.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:09.832Z,1520528469.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:10.209Z,1520528470.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:10.224Z,1520528470.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:10.608Z,1520528470.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:10.623Z,1520528470.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:11.003Z,1520528471.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:11.026Z,1520528471.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:11.417Z,1520528471.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:11.432Z,1520528471.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:11.821Z,1520528471.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:11.836Z,1520528471.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:12.196Z,1520528472.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:12.222Z,1520528472.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:12.592Z,1520528472.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:12.631Z,1520528472.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:13.019Z,1520528473.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:13.034Z,1520528473.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:13.411Z,1520528473.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:13.430Z,1520528473.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:13.813Z,1520528473.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:13.829Z,1520528473.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:14.195Z,1520528474.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:14.222Z,1520528474.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:14.598Z,1520528474.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:14.624Z,1520528474.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:15.019Z,1520528475.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:15.034Z,1520528475.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:15.422Z,1520528475.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:15.437Z,1520528475.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:15.807Z,1520528475.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:15.830Z,1520528475.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:16.195Z,1520528476.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:16.222Z,1520528476.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:16.599Z,1520528476.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:16.626Z,1520528476.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:17.009Z,1520528477.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:17.025Z,1520528477.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:17.414Z,1520528477.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:17.429Z,1520528477.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:17.813Z,1520528477.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:17.833Z,1520528477.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:18.192Z,1520528478.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:18.226Z,1520528478.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:18.598Z,1520528478.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:18.625Z,1520528478.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:19.015Z,1520528479.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:19.031Z,1520528479.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:19.411Z,1520528479.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:19.438Z,1520528479.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:19.813Z,1520528479.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:19.833Z,1520528479.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:20.200Z,1520528480.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:20.228Z,1520528480.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:20.602Z,1520528480.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:20.626Z,1520528480.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:21.017Z,1520528481.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:21.033Z,1520528481.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:21.418Z,1520528481.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:21.433Z,1520528481.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:21.813Z,1520528481.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:21.833Z,1520528481.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:22.201Z,1520528482.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:22.224Z,1520528482.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:22.604Z,1520528482.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:22.627Z,1520528482.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:23.014Z,1520528483.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:23.029Z,1520528483.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:23.423Z,1520528483.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:23.438Z,1520528483.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:23.820Z,1520528483.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:23.842Z,1520528483.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:24.204Z,1520528484.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:24.227Z,1520528484.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:24.599Z,1520528484.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:24.631Z,1520528484.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:25.020Z,1520528485.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:25.035Z,1520528485.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:25.413Z,1520528485.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:25.433Z,1520528485.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:25.816Z,1520528485.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:25.831Z,1520528485.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:26.199Z,1520528486.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:26.227Z,1520528486.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:26.595Z,1520528486.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:26.636Z,1520528486.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:27.010Z,1520528487.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:27.043Z,1520528487.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:27.405Z,1520528487.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:27.432Z,1520528487.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:27.805Z,1520528487.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:27.832Z,1520528487.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:28.201Z,1520528488.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:28.232Z,1520528488.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:28.603Z,1520528488.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:28.635Z,1520528488.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:29.017Z,1520528489.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:29.040Z,1520528489.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:29.414Z,1520528489.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:29.444Z,1520528489.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:29.810Z,1520528489.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:29.833Z,1520528489.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:30.204Z,1520528490.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:30.220Z,1520528490.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:30.603Z,1520528490.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:30.619Z,1520528490.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:31.014Z,1520528491.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:31.045Z,1520528491.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:31.409Z,1520528491.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:31.425Z,1520528491.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:31.810Z,1520528491.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:31.826Z,1520528491.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:32.207Z,1520528492.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:32.222Z,1520528492.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:32.602Z,1520528492.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:32.622Z,1520528492.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:33.006Z,1520528493.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:33.021Z,1520528493.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:33.410Z,1520528493.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:33.425Z,1520528493.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:33.806Z,1520528493.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:33.826Z,1520528493.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:34.217Z,1520528494.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:34.253Z,1520528494.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:34.603Z,1520528494.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:34.619Z,1520528494.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:35.012Z,1520528495.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:35.028Z,1520528495.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:35.408Z,1520528495.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:35.423Z,1520528495.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:35.809Z,1520528495.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:35.823Z,1520528495.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:36.205Z,1520528496.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:36.220Z,1520528496.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:36.601Z,1520528496.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:36.627Z,1520528496.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:37.013Z,1520528497.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:37.028Z,1520528497.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:37.412Z,1520528497.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:37.427Z,1520528497.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:37.812Z,1520528497.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:37.827Z,1520528497.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:38.209Z,1520528498.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:38.224Z,1520528498.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:38.606Z,1520528498.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:38.621Z,1520528498.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:39.012Z,1520528499.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:39.028Z,1520528499.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:39.412Z,1520528499.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:39.427Z,1520528499.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:39.815Z,1520528499.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:39.838Z,1520528499.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:40.211Z,1520528500.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:40.233Z,1520528500.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:40.591Z,1520528500.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:40.618Z,1520528500.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:41.013Z,1520528501.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:41.034Z,1520528501.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:41.417Z,1520528501.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:41.433Z,1520528501.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:41.816Z,1520528501.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:41.831Z,1520528501.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:42.202Z,1520528502.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:42.222Z,1520528502.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:42.603Z,1520528502.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:42.626Z,1520528502.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:43.016Z,1520528503.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:43.038Z,1520528503.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:43.416Z,1520528503.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:43.432Z,1520528503.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:43.813Z,1520528503.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:43.834Z,1520528503.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:44.204Z,1520528504.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:44.219Z,1520528504.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:44.605Z,1520528504.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:44.626Z,1520528504.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:45.016Z,1520528505.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:45.035Z,1520528505.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:45.416Z,1520528505.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:45.431Z,1520528505.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:45.813Z,1520528505.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:45.835Z,1520528505.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:46.218Z,1520528506.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:46.233Z,1520528506.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:46.603Z,1520528506.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:46.618Z,1520528506.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:47.013Z,1520528507.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:47.028Z,1520528507.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:47.416Z,1520528507.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:47.431Z,1520528507.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:47.818Z,1520528507.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:47.838Z,1520528507.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:50.904Z,1520528510.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:50.920Z,1520528510.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:51.023Z,1520528511.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:51.058Z,1520528511.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:51.392Z,1520528511.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:51.416Z,1520528511.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:51.786Z,1520528511.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:51.811Z,1520528511.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:52.186Z,1520528512.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:52.220Z,1520528512.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:52.578Z,1520528512.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:52.618Z,1520528512.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:52.972Z,1520528512.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:53.019Z,1520528513.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:53.371Z,1520528513.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:53.418Z,1520528513.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:53.775Z,1520528513.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:53.790Z,1520528513.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:54.192Z,1520528514.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:54.222Z,1520528514.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:54.591Z,1520528514.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:54.614Z,1520528514.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:54.987Z,1520528514.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:55.013Z,1520528515.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:55.379Z,1520528515.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:55.406Z,1520528515.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:55.776Z,1520528515.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:55.818Z,1520528515.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:55.831Z,1520528515.831 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T17:01:56.172Z,1520528516.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:56.198Z,1520528516.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:56.578Z,1520528516.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:56.597Z,1520528516.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:56.981Z,1520528516.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:56.997Z,1520528516.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:57.393Z,1520528517.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:57.423Z,1520528517.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:57.792Z,1520528517.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:57.823Z,1520528517.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:58.184Z,1520528518.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:58.199Z,1520528518.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:58.583Z,1520528518.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:58.599Z,1520528518.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:58.980Z,1520528518.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:59.020Z,1520528519.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:59.378Z,1520528519.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:59.421Z,1520528519.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:01:59.775Z,1520528519.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:01:59.803Z,1520528519.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:00.188Z,1520528520.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:00.204Z,1520528520.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:00.587Z,1520528520.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:00.605Z,1520528520.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:00.988Z,1520528520.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:01.004Z,1520528521.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:01.385Z,1520528521.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:01.401Z,1520528521.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:01.775Z,1520528521.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:01.797Z,1520528521.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:02.180Z,1520528522.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:02.206Z,1520528522.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:02.573Z,1520528522.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:02.600Z,1520528522.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:02.990Z,1520528522.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:03.005Z,1520528523.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:03.387Z,1520528523.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:03.406Z,1520528523.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:03.787Z,1520528523.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:03.806Z,1520528523.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:04.176Z,1520528524.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:04.199Z,1520528524.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:04.578Z,1520528524.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:04.605Z,1520528524.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:04.987Z,1520528524.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:05.002Z,1520528525.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:05.383Z,1520528525.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:05.403Z,1520528525.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:05.794Z,1520528525.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:05.830Z,1520528525.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:06.195Z,1520528526.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:06.210Z,1520528526.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:06.583Z,1520528526.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:06.599Z,1520528526.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:06.980Z,1520528526.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:07.032Z,1520528527.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:07.380Z,1520528527.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:07.414Z,1520528527.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:07.785Z,1520528527.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:07.803Z,1520528527.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:08.189Z,1520528528.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:08.205Z,1520528528.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:08.592Z,1520528528.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:08.609Z,1520528528.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:08.991Z,1520528528.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:09.007Z,1520528529.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:09.382Z,1520528529.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:09.402Z,1520528529.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:09.781Z,1520528529.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:09.796Z,1520528529.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:10.180Z,1520528530.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:10.230Z,1520528530.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:10.583Z,1520528530.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:10.630Z,1520528530.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:10.994Z,1520528530.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:11.009Z,1520528531.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:11.388Z,1520528531.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:11.404Z,1520528531.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:11.782Z,1520528531.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:11.813Z,1520528531.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:12.171Z,1520528532.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:12.204Z,1520528532.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:12.583Z,1520528532.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:12.599Z,1520528532.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:12.969Z,1520528532.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:13.001Z,1520528533.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:13.398Z,1520528533.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:13.413Z,1520528533.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:13.796Z,1520528533.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:13.813Z,1520528533.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:14.182Z,1520528534.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:14.209Z,1520528534.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:14.575Z,1520528534.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:14.602Z,1520528534.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:14.971Z,1520528534.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:15.003Z,1520528535.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:15.367Z,1520528535.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:15.402Z,1520528535.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:15.768Z,1520528535.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:15.810Z,1520528535.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:16.194Z,1520528536.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:16.210Z,1520528536.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:16.582Z,1520528536.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:16.619Z,1520528536.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:16.987Z,1520528536.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:17.012Z,1520528537.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:17.370Z,1520528537.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:17.388Z,1520528537.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:17.774Z,1520528537.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:17.819Z,1520528537.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:18.171Z,1520528538.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:18.214Z,1520528538.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:18.571Z,1520528538.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:18.591Z,1520528538.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:18.986Z,1520528538.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:19.017Z,1520528539.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:19.389Z,1520528539.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:19.420Z,1520528539.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:19.787Z,1520528539.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:19.818Z,1520528539.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:20.176Z,1520528540.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:20.196Z,1520528540.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:20.578Z,1520528540.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:20.593Z,1520528540.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:20.985Z,1520528540.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:21.017Z,1520528541.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:21.391Z,1520528541.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:21.424Z,1520528541.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:21.788Z,1520528541.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:21.802Z,1520528541.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:22.183Z,1520528542.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:22.199Z,1520528542.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:22.574Z,1520528542.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:22.597Z,1520528542.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:22.987Z,1520528542.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:23.005Z,1520528543.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:23.391Z,1520528543.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:23.410Z,1520528543.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:23.793Z,1520528543.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:23.808Z,1520528543.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:24.187Z,1520528544.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:24.202Z,1520528544.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:24.577Z,1520528544.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:24.610Z,1520528544.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:24.991Z,1520528544.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:25.030Z,1520528545.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:25.393Z,1520528545.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:25.408Z,1520528545.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:25.789Z,1520528545.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:25.804Z,1520528545.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:26.173Z,1520528546.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:26.223Z,1520528546.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:26.584Z,1520528546.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:26.611Z,1520528546.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:26.980Z,1520528546.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:26.000Z,1520528547.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:27.389Z,1520528547.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:27.404Z,1520528547.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:27.790Z,1520528547.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:27.807Z,1520528547.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:28.192Z,1520528548.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:28.208Z,1520528548.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:28.583Z,1520528548.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:28.602Z,1520528548.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:28.985Z,1520528548.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:29.000Z,1520528549.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:29.380Z,1520528549.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:29.423Z,1520528549.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:29.773Z,1520528549.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:29.821Z,1520528549.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:30.194Z,1520528550.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:30.209Z,1520528550.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:30.589Z,1520528550.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:30.604Z,1520528550.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:30.991Z,1520528550.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:31.008Z,1520528551.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:31.382Z,1520528551.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:31.398Z,1520528551.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:31.792Z,1520528551.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:31.807Z,1520528551.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:32.182Z,1520528552.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:32.202Z,1520528552.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:32.580Z,1520528552.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:32.607Z,1520528552.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:32.982Z,1520528552.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:33.024Z,1520528553.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:33.388Z,1520528553.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:33.408Z,1520528553.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:33.790Z,1520528553.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:33.805Z,1520528553.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:34.194Z,1520528554.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:34.210Z,1520528554.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:34.583Z,1520528554.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:34.599Z,1520528554.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:34.980Z,1520528554.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:35.002Z,1520528555.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:35.373Z,1520528555.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:35.406Z,1520528555.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:35.780Z,1520528555.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:35.818Z,1520528555.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:36.195Z,1520528556.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:36.231Z,1520528556.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:36.595Z,1520528556.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:36.618Z,1520528556.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:36.992Z,1520528556.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:37.014Z,1520528557.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:37.371Z,1520528557.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:37.415Z,1520528557.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:37.771Z,1520528557.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:37.832Z,1520528557.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:38.183Z,1520528558.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:38.202Z,1520528558.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:38.571Z,1520528558.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:38.607Z,1520528558.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:38.988Z,1520528558.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:39.006Z,1520528559.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:39.399Z,1520528559.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:39.414Z,1520528559.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:39.791Z,1520528559.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:39.818Z,1520528559.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:40.168Z,1520528560.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:40.207Z,1520528560.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:40.576Z,1520528560.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:40.613Z,1520528560.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:40.973Z,1520528560.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:41.005Z,1520528561.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:41.377Z,1520528561.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:41.409Z,1520528561.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:41.789Z,1520528561.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:41.818Z,1520528561.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:42.192Z,1520528562.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:42.217Z,1520528562.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:42.576Z,1520528562.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:42.612Z,1520528562.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:42.977Z,1520528562.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:43.015Z,1520528563.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:43.378Z,1520528563.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:43.394Z,1520528563.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:43.777Z,1520528563.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:43.822Z,1520528563.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:44.188Z,1520528564.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:44.223Z,1520528564.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:44.590Z,1520528564.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:44.627Z,1520528564.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:44.979Z,1520528564.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:44.999Z,1520528564.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:45.376Z,1520528565.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:45.417Z,1520528565.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:45.782Z,1520528565.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:45.798Z,1520528565.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:46.175Z,1520528566.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:46.216Z,1520528566.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:46.584Z,1520528566.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:46.600Z,1520528566.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:46.981Z,1520528566.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:47.011Z,1520528567.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:47.032Z,1520528567.032 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T16:57:47.0Z
2018-03-08T17:02:47.032Z,1520528567.032 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T17:02:47.032Z,1520528567.032 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T17:02:47.384Z,1520528567.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:47.424Z,1520528567.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:47.885Z,1520528567.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:47.901Z,1520528567.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:48.187Z,1520528568.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:48.207Z,1520528568.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:51.282Z,1520528571.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:51.297Z,1520528571.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:51.389Z,1520528571.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:51.474Z,1520528571.474 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:51.474Z,1520528571.474 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 186
2018-03-08T17:02:51.474Z,1520528571.474 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T17:02:51.476Z,1520528571.476 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:51.476Z,1520528571.476 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 186
2018-03-08T17:02:51.476Z,1520528571.476 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T17:02:51.478Z,1520528571.478 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:51.478Z,1520528571.478 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 186
2018-03-08T17:02:51.478Z,1520528571.478 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T17:02:51.490Z,1520528571.490 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T17:02:51.490Z,1520528571.490 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T17:02:51.490Z,1520528571.490 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T17:02:51.738Z,1520528571.738 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0216.lzma
2018-03-08T17:02:51.784Z,1520528571.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:51.815Z,1520528571.815 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T17:02:51.815Z,1520528571.815 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 186
2018-03-08T17:02:51.815Z,1520528571.815 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T17:02:51.815Z,1520528571.815 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 186
2018-03-08T17:02:51.816Z,1520528571.816 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T17:02:51.816Z,1520528571.816 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 186
2018-03-08T17:02:52.157Z,1520528572.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:52.187Z,1520528572.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T17:02:52.187Z,1520528572.187 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:02:52.187Z,1520528572.187 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:02:52.188Z,1520528572.188 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T17:02:52.188Z,1520528572.188 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:02:52.189Z,1520528572.189 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:02:52.189Z,1520528572.189 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T17:02:52.189Z,1520528572.189 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:02:52.190Z,1520528572.190 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:02:53.275Z,1520528573.275 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0216.lzma.bak
2018-03-08T17:02:53.275Z,1520528573.275 [DataOverHttps](INFO): SBD MOMSN=7987506
2018-03-08T17:02:53.314Z,1520528573.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:53.354Z,1520528573.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.9 s old, using for 20.0 s.
2018-03-08T17:02:53.355Z,1520528573.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:53.621Z,1520528573.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:53.644Z,1520528573.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2018-03-08T17:02:53.645Z,1520528573.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:53.823Z,1520528573.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:53.851Z,1520528573.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T17:02:53.852Z,1520528573.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:56.997Z,1520528576.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:57.016Z,1520528577.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2018-03-08T17:02:57.017Z,1520528577.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:57.135Z,1520528577.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:57.173Z,1520528577.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T17:02:57.174Z,1520528577.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:57.486Z,1520528577.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:57.524Z,1520528577.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T17:02:57.526Z,1520528577.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:57.882Z,1520528577.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:57.896Z,1520528577.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T17:02:57.897Z,1520528577.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:58.286Z,1520528578.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:58.301Z,1520528578.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T17:02:58.302Z,1520528578.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:58.671Z,1520528578.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:58.694Z,1520528578.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T17:02:58.695Z,1520528578.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:02:59.076Z,1520528579.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:02:59.091Z,1520528579.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T17:02:59.092Z,1520528579.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:02.213Z,1520528582.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:02.280Z,1520528582.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T17:03:02.281Z,1520528582.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:02.364Z,1520528582.364 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180308T074127/Express0217.lzma
2018-03-08T17:03:02.386Z,1520528582.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:02.446Z,1520528582.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2018-03-08T17:03:02.447Z,1520528582.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:02.758Z,1520528582.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:02.786Z,1520528582.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T17:03:02.787Z,1520528582.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:03.118Z,1520528583.118 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0217.lzma.bak
2018-03-08T17:03:03.118Z,1520528583.118 [DataOverHttps](INFO): SBD MOMSN=7987508
2018-03-08T17:03:03.153Z,1520528583.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:03.191Z,1520528583.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T17:03:03.191Z,1520528583.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:03.742Z,1520528583.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:03.757Z,1520528583.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2018-03-08T17:03:03.758Z,1520528583.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:03.777Z,1520528583.777 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T17:03:03.777Z,1520528583.777 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T17:03:03.777Z,1520528583.777 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T17:03:03.943Z,1520528583.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:03.959Z,1520528583.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T17:03:03.960Z,1520528583.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:07.139Z,1520528587.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:07.154Z,1520528587.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T17:03:07.155Z,1520528587.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:07.249Z,1520528587.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:07.293Z,1520528587.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-03-08T17:03:07.294Z,1520528587.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:07.665Z,1520528587.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:07.688Z,1520528587.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-03-08T17:03:07.689Z,1520528587.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:08.046Z,1520528588.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:08.062Z,1520528588.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-03-08T17:03:08.063Z,1520528588.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:08.457Z,1520528588.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:08.515Z,1520528588.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-03-08T17:03:08.516Z,1520528588.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:08.845Z,1520528588.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:08.902Z,1520528588.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-03-08T17:03:08.902Z,1520528588.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:09.233Z,1520528589.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:09.263Z,1520528589.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-03-08T17:03:09.265Z,1520528589.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:09.643Z,1520528589.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:09.659Z,1520528589.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-03-08T17:03:09.661Z,1520528589.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:10.058Z,1520528590.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:10.084Z,1520528590.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-03-08T17:03:10.085Z,1520528590.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:10.445Z,1520528590.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:10.462Z,1520528590.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-03-08T17:03:10.463Z,1520528590.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:10.853Z,1520528590.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:10.887Z,1520528590.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-03-08T17:03:10.888Z,1520528590.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:11.239Z,1520528591.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:11.254Z,1520528591.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-03-08T17:03:11.255Z,1520528591.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:11.635Z,1520528591.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:11.651Z,1520528591.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:12.040Z,1520528592.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:12.056Z,1520528592.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:12.438Z,1520528592.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:12.454Z,1520528592.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:12.838Z,1520528592.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:12.859Z,1520528592.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:13.254Z,1520528593.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:13.287Z,1520528593.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:13.653Z,1520528593.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:13.687Z,1520528593.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:14.052Z,1520528594.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:14.067Z,1520528594.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:14.436Z,1520528594.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:14.451Z,1520528594.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:14.840Z,1520528594.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:14.856Z,1520528594.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:15.236Z,1520528595.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:15.258Z,1520528595.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:15.640Z,1520528595.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:15.655Z,1520528595.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:16.045Z,1520528596.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:16.069Z,1520528596.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:16.451Z,1520528596.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:16.472Z,1520528596.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:16.850Z,1520528596.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:16.865Z,1520528596.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:17.231Z,1520528597.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:17.259Z,1520528597.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:17.631Z,1520528597.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:17.658Z,1520528597.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:18.050Z,1520528598.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:18.066Z,1520528598.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:18.453Z,1520528598.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:18.475Z,1520528598.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:18.858Z,1520528598.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:18.878Z,1520528598.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:19.235Z,1520528599.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:19.262Z,1520528599.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:19.631Z,1520528599.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:19.657Z,1520528599.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:20.031Z,1520528600.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:20.057Z,1520528600.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:20.431Z,1520528600.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:20.458Z,1520528600.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:20.831Z,1520528600.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:20.893Z,1520528600.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:21.251Z,1520528601.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:21.291Z,1520528601.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:21.658Z,1520528601.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:21.673Z,1520528601.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:22.049Z,1520528602.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:22.065Z,1520528602.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:22.431Z,1520528602.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:22.462Z,1520528602.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:22.835Z,1520528602.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:22.862Z,1520528602.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:23.235Z,1520528603.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:23.262Z,1520528603.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:23.631Z,1520528603.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:23.670Z,1520528603.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:24.054Z,1520528604.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:24.074Z,1520528604.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:24.453Z,1520528604.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:24.474Z,1520528604.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:24.853Z,1520528604.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:24.869Z,1520528604.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:25.231Z,1520528605.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:25.263Z,1520528605.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:25.635Z,1520528605.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:25.662Z,1520528605.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:26.031Z,1520528606.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:26.062Z,1520528606.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:26.435Z,1520528606.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:26.463Z,1520528606.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:26.830Z,1520528606.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:26.862Z,1520528606.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:27.254Z,1520528607.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:27.269Z,1520528607.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:27.654Z,1520528607.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:27.674Z,1520528607.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:28.053Z,1520528608.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:28.074Z,1520528608.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:28.431Z,1520528608.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:28.463Z,1520528608.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:28.831Z,1520528608.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:28.863Z,1520528608.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:29.235Z,1520528609.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:29.267Z,1520528609.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:29.631Z,1520528609.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:29.658Z,1520528609.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:30.045Z,1520528610.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:30.072Z,1520528610.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:30.445Z,1520528610.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:30.472Z,1520528610.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:30.845Z,1520528610.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:30.878Z,1520528610.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:31.231Z,1520528611.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:31.267Z,1520528611.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:31.634Z,1520528611.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:31.671Z,1520528611.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:32.031Z,1520528612.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:32.046Z,1520528612.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:32.441Z,1520528612.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:32.456Z,1520528612.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:32.838Z,1520528612.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:32.859Z,1520528612.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:33.249Z,1520528613.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:33.305Z,1520528613.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:33.645Z,1520528613.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:33.690Z,1520528613.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:34.053Z,1520528614.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:34.082Z,1520528614.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:34.439Z,1520528614.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:34.455Z,1520528614.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:34.840Z,1520528614.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:34.856Z,1520528614.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:35.241Z,1520528615.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:35.256Z,1520528615.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:35.639Z,1520528615.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:35.654Z,1520528615.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:36.045Z,1520528616.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:36.061Z,1520528616.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:36.453Z,1520528616.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:36.484Z,1520528616.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:36.841Z,1520528616.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:36.862Z,1520528616.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:37.243Z,1520528617.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:37.259Z,1520528617.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:37.639Z,1520528617.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:37.655Z,1520528617.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:38.040Z,1520528618.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:38.055Z,1520528618.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:38.440Z,1520528618.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:38.455Z,1520528618.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:38.840Z,1520528618.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:38.855Z,1520528618.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:39.254Z,1520528619.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:39.283Z,1520528619.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:39.641Z,1520528619.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:39.657Z,1520528619.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:40.053Z,1520528620.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:40.082Z,1520528620.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:40.439Z,1520528620.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:40.454Z,1520528620.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:40.840Z,1520528620.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:40.954Z,1520528620.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:41.240Z,1520528621.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:41.256Z,1520528621.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:41.641Z,1520528621.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:41.656Z,1520528621.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:42.053Z,1520528622.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:42.083Z,1520528622.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:42.445Z,1520528622.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:42.461Z,1520528622.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:42.845Z,1520528622.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:42.862Z,1520528622.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:43.240Z,1520528623.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:43.256Z,1520528623.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:43.659Z,1520528623.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:43.682Z,1520528623.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:44.041Z,1520528624.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:44.057Z,1520528624.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:44.438Z,1520528624.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:44.458Z,1520528624.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:44.847Z,1520528624.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:44.863Z,1520528624.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:45.247Z,1520528625.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:45.263Z,1520528625.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:45.649Z,1520528625.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:45.665Z,1520528625.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:46.047Z,1520528626.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:46.110Z,1520528626.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:46.436Z,1520528626.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:46.490Z,1520528626.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:46.841Z,1520528626.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:46.857Z,1520528626.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:47.244Z,1520528627.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:47.260Z,1520528627.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:47.642Z,1520528627.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:47.658Z,1520528627.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:48.046Z,1520528628.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:48.063Z,1520528628.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:48.446Z,1520528628.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:48.462Z,1520528628.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:48.846Z,1520528628.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:48.862Z,1520528628.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:49.232Z,1520528629.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:49.259Z,1520528629.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:49.642Z,1520528629.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:49.658Z,1520528629.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:50.039Z,1520528630.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:50.055Z,1520528630.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:50.435Z,1520528630.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:50.451Z,1520528630.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:50.838Z,1520528630.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:50.855Z,1520528630.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:51.245Z,1520528631.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:51.260Z,1520528631.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:51.649Z,1520528631.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:51.665Z,1520528631.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:52.044Z,1520528632.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:52.063Z,1520528632.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:52.442Z,1520528632.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:52.457Z,1520528632.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:52.832Z,1520528632.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:52.862Z,1520528632.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:53.243Z,1520528633.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:53.263Z,1520528633.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:53.645Z,1520528633.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:53.660Z,1520528633.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:54.046Z,1520528634.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:54.061Z,1520528634.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:54.449Z,1520528634.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:54.465Z,1520528634.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:54.848Z,1520528634.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:54.865Z,1520528634.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:55.243Z,1520528635.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:55.263Z,1520528635.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:55.643Z,1520528635.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:55.663Z,1520528635.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:56.040Z,1520528636.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:56.055Z,1520528636.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:56.435Z,1520528636.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:56.467Z,1520528636.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:56.839Z,1520528636.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:56.854Z,1520528636.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:57.248Z,1520528637.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:57.264Z,1520528637.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:57.648Z,1520528637.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:57.665Z,1520528637.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:58.048Z,1520528638.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:58.064Z,1520528638.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:58.444Z,1520528638.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:58.472Z,1520528638.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:58.835Z,1520528638.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:58.898Z,1520528638.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:59.237Z,1520528639.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:59.261Z,1520528639.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:03:59.643Z,1520528639.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:03:59.659Z,1520528639.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:00.018Z,1520528640.018 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T17:04:00.018Z,1520528640.018 [NAL9602] Data Fault, FailCount= 2
2018-03-08T17:04:00.018Z,1520528640.018 [NAL9602](ERROR): Data Fault
2018-03-08T17:04:00.054Z,1520528640.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:00.070Z,1520528640.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:00.083Z,1520528640.083 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T17:04:00.418Z,1520528640.418 [NAL9602](INFO): Powering down
2018-03-08T17:04:00.443Z,1520528640.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:00.480Z,1520528640.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:00.826Z,1520528640.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:00.858Z,1520528640.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:01.228Z,1520528641.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:01.255Z,1520528641.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:01.281Z,1520528641.281 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T17:04:01.281Z,1520528641.281 [NAL9602] No Fault, FailCount= 2
2018-03-08T17:04:01.634Z,1520528641.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:01.661Z,1520528641.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:02.026Z,1520528642.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:02.061Z,1520528642.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:02.434Z,1520528642.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:02.462Z,1520528642.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:02.830Z,1520528642.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:02.866Z,1520528642.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:03.234Z,1520528643.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:03.260Z,1520528643.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:03.634Z,1520528643.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:03.661Z,1520528643.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:04.030Z,1520528644.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:04.063Z,1520528644.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:04.434Z,1520528644.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:04.466Z,1520528644.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:07.566Z,1520528647.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:07.582Z,1520528647.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:07.680Z,1520528647.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:07.718Z,1520528647.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:08.055Z,1520528648.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:08.074Z,1520528648.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:08.454Z,1520528648.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:08.469Z,1520528648.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:08.849Z,1520528648.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:08.873Z,1520528648.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:09.242Z,1520528649.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:09.269Z,1520528649.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:09.642Z,1520528649.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:09.669Z,1520528649.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:10.056Z,1520528650.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:10.079Z,1520528650.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:10.442Z,1520528650.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:10.506Z,1520528650.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:10.846Z,1520528650.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:10.894Z,1520528650.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:11.242Z,1520528651.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:11.287Z,1520528651.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:11.642Z,1520528651.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:11.678Z,1520528651.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:12.047Z,1520528652.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:12.078Z,1520528652.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:12.446Z,1520528652.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:12.478Z,1520528652.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:12.846Z,1520528652.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:12.878Z,1520528652.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:13.242Z,1520528653.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:13.277Z,1520528653.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:13.644Z,1520528653.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:13.676Z,1520528653.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:14.046Z,1520528654.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:14.085Z,1520528654.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:14.449Z,1520528654.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:14.464Z,1520528654.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:14.852Z,1520528654.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:14.867Z,1520528654.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:15.251Z,1520528655.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:15.267Z,1520528655.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:15.651Z,1520528655.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:15.666Z,1520528655.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:16.051Z,1520528656.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:16.067Z,1520528656.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:16.448Z,1520528656.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:16.471Z,1520528656.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:16.852Z,1520528656.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:16.867Z,1520528656.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:17.251Z,1520528657.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:17.267Z,1520528657.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:17.648Z,1520528657.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:17.672Z,1520528657.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:18.051Z,1520528658.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:18.066Z,1520528658.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:18.450Z,1520528658.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:18.471Z,1520528658.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:18.851Z,1520528658.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:18.868Z,1520528658.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:19.251Z,1520528659.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:19.266Z,1520528659.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:19.648Z,1520528659.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:19.671Z,1520528659.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:20.048Z,1520528660.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:20.072Z,1520528660.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:20.452Z,1520528660.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:20.468Z,1520528660.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:20.853Z,1520528660.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:20.868Z,1520528660.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:21.252Z,1520528661.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:21.267Z,1520528661.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:21.652Z,1520528661.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:21.667Z,1520528661.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:22.052Z,1520528662.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:22.068Z,1520528662.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:22.452Z,1520528662.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:22.474Z,1520528662.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:22.847Z,1520528662.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:22.875Z,1520528662.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:23.255Z,1520528663.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:23.278Z,1520528663.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:23.647Z,1520528663.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:23.703Z,1520528663.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:24.055Z,1520528664.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:24.070Z,1520528664.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:24.455Z,1520528664.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:24.471Z,1520528664.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:24.855Z,1520528664.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:24.875Z,1520528664.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:25.254Z,1520528665.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:25.270Z,1520528665.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:25.653Z,1520528665.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:25.670Z,1520528665.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:26.051Z,1520528666.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:26.066Z,1520528666.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:26.452Z,1520528666.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:26.467Z,1520528666.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:26.849Z,1520528666.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:26.864Z,1520528666.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:27.247Z,1520528667.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:27.270Z,1520528667.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:27.654Z,1520528667.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:27.669Z,1520528667.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:28.047Z,1520528668.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:28.064Z,1520528668.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:28.449Z,1520528668.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:28.481Z,1520528668.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:28.854Z,1520528668.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:28.869Z,1520528668.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:29.236Z,1520528669.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:29.268Z,1520528669.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:29.653Z,1520528669.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:29.674Z,1520528669.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:30.038Z,1520528670.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:30.072Z,1520528670.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:30.430Z,1520528670.430 [NAL9602](INFO): Powering up NAL9602
2018-03-08T17:04:30.459Z,1520528670.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:30.477Z,1520528670.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:30.842Z,1520528670.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:30.875Z,1520528670.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:31.243Z,1520528671.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:31.269Z,1520528671.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:31.642Z,1520528671.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:31.670Z,1520528671.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:32.042Z,1520528672.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:32.069Z,1520528672.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:32.442Z,1520528672.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:32.478Z,1520528672.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:32.844Z,1520528672.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:32.871Z,1520528672.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:33.243Z,1520528673.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:33.270Z,1520528673.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:33.638Z,1520528673.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:33.664Z,1520528673.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:34.037Z,1520528674.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:34.075Z,1520528674.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:34.442Z,1520528674.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:34.475Z,1520528674.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:34.842Z,1520528674.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:34.875Z,1520528674.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:35.238Z,1520528675.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:35.276Z,1520528675.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:35.642Z,1520528675.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:35.669Z,1520528675.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:36.038Z,1520528676.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:36.104Z,1520528676.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:36.446Z,1520528676.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:36.490Z,1520528676.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:36.846Z,1520528676.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:36.873Z,1520528676.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:37.238Z,1520528677.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:37.270Z,1520528677.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:37.646Z,1520528677.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:37.673Z,1520528677.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:38.043Z,1520528678.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:38.070Z,1520528678.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:38.438Z,1520528678.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:38.470Z,1520528678.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:38.836Z,1520528678.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:38.859Z,1520528678.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:39.246Z,1520528679.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:39.273Z,1520528679.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:39.642Z,1520528679.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:39.674Z,1520528679.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:40.040Z,1520528680.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:40.063Z,1520528680.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:40.446Z,1520528680.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:40.478Z,1520528680.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:40.846Z,1520528680.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:40.878Z,1520528680.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:41.256Z,1520528681.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:41.288Z,1520528681.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:41.628Z,1520528681.628 [NAL9602](INFO): NAL9602 initialized
2018-03-08T17:04:41.644Z,1520528681.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:41.660Z,1520528681.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:42.047Z,1520528682.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:42.062Z,1520528682.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:42.465Z,1520528682.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:42.491Z,1520528682.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:42.861Z,1520528682.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:42.885Z,1520528682.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:43.261Z,1520528683.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:43.290Z,1520528683.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:43.648Z,1520528683.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:43.664Z,1520528683.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:44.051Z,1520528684.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:44.087Z,1520528684.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:44.451Z,1520528684.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:44.467Z,1520528684.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:44.851Z,1520528684.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:44.867Z,1520528684.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:45.265Z,1520528685.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:45.295Z,1520528685.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:45.661Z,1520528685.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:45.676Z,1520528685.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:46.053Z,1520528686.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:46.069Z,1520528686.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:46.453Z,1520528686.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:46.469Z,1520528686.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:46.851Z,1520528686.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:46.873Z,1520528686.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:47.257Z,1520528687.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:47.302Z,1520528687.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:47.661Z,1520528687.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:47.677Z,1520528687.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:48.057Z,1520528688.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:48.079Z,1520528688.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:48.448Z,1520528688.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:48.482Z,1520528688.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:48.852Z,1520528688.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:48.868Z,1520528688.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:49.259Z,1520528689.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:49.275Z,1520528689.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:49.662Z,1520528689.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:49.678Z,1520528689.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:50.060Z,1520528690.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:50.075Z,1520528690.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:50.452Z,1520528690.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:50.467Z,1520528690.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:50.855Z,1520528690.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:50.871Z,1520528690.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:51.260Z,1520528691.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:51.275Z,1520528691.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:51.659Z,1520528691.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:51.675Z,1520528691.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:52.061Z,1520528692.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:52.076Z,1520528692.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:52.459Z,1520528692.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:52.475Z,1520528692.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:52.854Z,1520528692.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:52.870Z,1520528692.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:53.261Z,1520528693.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:53.277Z,1520528693.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:53.660Z,1520528693.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:53.675Z,1520528693.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:54.060Z,1520528694.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:54.075Z,1520528694.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:54.457Z,1520528694.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:54.473Z,1520528694.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:54.851Z,1520528694.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:54.866Z,1520528694.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:55.260Z,1520528695.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:55.282Z,1520528695.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:55.661Z,1520528695.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:55.677Z,1520528695.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:56.060Z,1520528696.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:56.076Z,1520528696.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:56.451Z,1520528696.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:56.467Z,1520528696.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:56.852Z,1520528696.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:56.867Z,1520528696.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:57.260Z,1520528697.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:57.276Z,1520528697.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:57.661Z,1520528697.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:57.676Z,1520528697.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:58.061Z,1520528698.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:58.076Z,1520528698.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:58.455Z,1520528698.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:58.472Z,1520528698.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:58.851Z,1520528698.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:58.871Z,1520528698.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:59.262Z,1520528699.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:59.282Z,1520528699.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:04:59.661Z,1520528699.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:04:59.683Z,1520528699.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:00.061Z,1520528700.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:00.110Z,1520528700.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:00.458Z,1520528700.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:00.473Z,1520528700.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:00.859Z,1520528700.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:00.881Z,1520528700.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:01.261Z,1520528701.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:01.294Z,1520528701.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:01.663Z,1520528701.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:01.678Z,1520528701.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:02.063Z,1520528702.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:02.078Z,1520528702.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:02.456Z,1520528702.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:02.472Z,1520528702.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:02.858Z,1520528702.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:02.874Z,1520528702.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:03.263Z,1520528703.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:03.286Z,1520528703.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:03.669Z,1520528703.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:03.683Z,1520528703.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:04.058Z,1520528704.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:04.075Z,1520528704.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:04.442Z,1520528704.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:04.478Z,1520528704.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:07.555Z,1520528707.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:07.571Z,1520528707.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:07.674Z,1520528707.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:07.718Z,1520528707.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:08.041Z,1520528708.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:08.075Z,1520528708.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:08.444Z,1520528708.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:08.469Z,1520528708.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:08.827Z,1520528708.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:08.843Z,1520528708.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:09.223Z,1520528709.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:09.243Z,1520528709.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:09.629Z,1520528709.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:09.644Z,1520528709.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:10.027Z,1520528710.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:10.047Z,1520528710.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:10.429Z,1520528710.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:10.445Z,1520528710.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:10.890Z,1520528710.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:10.966Z,1520528710.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:11.229Z,1520528711.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:11.245Z,1520528711.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:11.628Z,1520528711.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:11.643Z,1520528711.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:12.026Z,1520528712.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:12.042Z,1520528712.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:12.427Z,1520528712.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:12.449Z,1520528712.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:12.826Z,1520528712.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:12.873Z,1520528712.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:13.233Z,1520528713.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:13.248Z,1520528713.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:13.633Z,1520528713.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:13.655Z,1520528713.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:14.032Z,1520528714.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:14.077Z,1520528714.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:14.428Z,1520528714.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:14.450Z,1520528714.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:14.828Z,1520528714.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:14.844Z,1520528714.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:15.232Z,1520528715.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:15.247Z,1520528715.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:15.633Z,1520528715.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:15.648Z,1520528715.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:16.033Z,1520528716.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:16.049Z,1520528716.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:16.431Z,1520528716.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:16.447Z,1520528716.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:16.828Z,1520528716.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:16.843Z,1520528716.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:17.232Z,1520528717.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:17.247Z,1520528717.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:17.635Z,1520528717.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:17.658Z,1520528717.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:18.037Z,1520528718.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:18.051Z,1520528718.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:18.428Z,1520528718.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:18.443Z,1520528718.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:18.827Z,1520528718.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:18.842Z,1520528718.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:19.236Z,1520528719.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:19.258Z,1520528719.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:19.636Z,1520528719.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:19.651Z,1520528719.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:20.036Z,1520528720.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:20.052Z,1520528720.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:20.429Z,1520528720.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:20.444Z,1520528720.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:20.822Z,1520528720.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:20.849Z,1520528720.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:21.241Z,1520528721.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:21.263Z,1520528721.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:21.641Z,1520528721.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:21.662Z,1520528721.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:22.040Z,1520528722.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:22.056Z,1520528722.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:22.427Z,1520528722.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:22.444Z,1520528722.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:22.825Z,1520528722.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:22.847Z,1520528722.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:23.241Z,1520528723.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:23.256Z,1520528723.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:23.640Z,1520528723.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:23.662Z,1520528723.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:24.042Z,1520528724.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:24.063Z,1520528724.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:24.423Z,1520528724.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:24.450Z,1520528724.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:24.835Z,1520528724.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:24.857Z,1520528724.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:25.243Z,1520528725.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:25.293Z,1520528725.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:25.645Z,1520528725.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:25.667Z,1520528725.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:26.037Z,1520528726.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:26.059Z,1520528726.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:26.419Z,1520528726.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:26.455Z,1520528726.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:26.819Z,1520528726.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:26.851Z,1520528726.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:27.243Z,1520528727.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:27.258Z,1520528727.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:27.641Z,1520528727.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:27.660Z,1520528727.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:28.042Z,1520528728.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:28.057Z,1520528728.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:28.418Z,1520528728.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:28.454Z,1520528728.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:28.819Z,1520528728.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:28.851Z,1520528728.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:29.229Z,1520528729.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:29.256Z,1520528729.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:29.633Z,1520528729.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:29.659Z,1520528729.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:30.033Z,1520528730.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:30.071Z,1520528730.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:30.423Z,1520528730.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:30.439Z,1520528730.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:30.826Z,1520528730.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:30.842Z,1520528730.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:31.241Z,1520528731.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:31.266Z,1520528731.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:31.637Z,1520528731.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:31.673Z,1520528731.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:32.038Z,1520528732.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:32.069Z,1520528732.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:32.429Z,1520528732.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:32.445Z,1520528732.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:32.828Z,1520528732.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:32.844Z,1520528732.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:33.229Z,1520528733.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:33.245Z,1520528733.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:33.641Z,1520528733.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:33.673Z,1520528733.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:34.033Z,1520528734.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:34.050Z,1520528734.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:34.433Z,1520528734.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:34.448Z,1520528734.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:34.833Z,1520528734.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:34.855Z,1520528734.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:35.253Z,1520528735.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:35.276Z,1520528735.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:35.637Z,1520528735.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:35.653Z,1520528735.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:36.037Z,1520528736.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:36.053Z,1520528736.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:36.432Z,1520528736.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:36.448Z,1520528736.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:36.833Z,1520528736.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:36.849Z,1520528736.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:37.237Z,1520528737.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:37.259Z,1520528737.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:37.637Z,1520528737.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:37.681Z,1520528737.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:38.037Z,1520528738.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:38.053Z,1520528738.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:38.433Z,1520528738.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:38.455Z,1520528738.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:38.823Z,1520528738.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:38.857Z,1520528738.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:39.241Z,1520528739.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:39.257Z,1520528739.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:39.642Z,1520528739.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:39.657Z,1520528739.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:40.041Z,1520528740.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:40.057Z,1520528740.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:40.432Z,1520528740.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:40.455Z,1520528740.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:40.836Z,1520528740.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:40.852Z,1520528740.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:41.241Z,1520528741.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:41.262Z,1520528741.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:41.641Z,1520528741.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:41.657Z,1520528741.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:42.041Z,1520528742.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:42.056Z,1520528742.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:42.433Z,1520528742.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:42.449Z,1520528742.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:42.827Z,1520528742.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:42.843Z,1520528742.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:43.241Z,1520528743.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:43.262Z,1520528743.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:43.641Z,1520528743.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:43.657Z,1520528743.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:44.037Z,1520528744.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:44.052Z,1520528744.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:44.433Z,1520528744.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:44.448Z,1520528744.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:44.831Z,1520528744.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:44.855Z,1520528744.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:45.237Z,1520528745.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:45.253Z,1520528745.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:45.641Z,1520528745.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:45.662Z,1520528745.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:46.040Z,1520528746.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:46.062Z,1520528746.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:46.429Z,1520528746.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:46.445Z,1520528746.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:46.827Z,1520528746.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:46.850Z,1520528746.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:47.240Z,1520528747.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:47.256Z,1520528747.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:47.640Z,1520528747.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:47.664Z,1520528747.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:48.041Z,1520528748.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:48.062Z,1520528748.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:48.433Z,1520528748.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:48.448Z,1520528748.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:48.823Z,1520528748.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:48.845Z,1520528748.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:49.241Z,1520528749.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:49.256Z,1520528749.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:49.640Z,1520528749.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:49.663Z,1520528749.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:50.033Z,1520528750.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:50.087Z,1520528750.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:50.419Z,1520528750.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:50.456Z,1520528750.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:50.831Z,1520528750.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:50.853Z,1520528750.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:51.245Z,1520528751.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:51.295Z,1520528751.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:51.637Z,1520528751.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:51.658Z,1520528751.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:52.041Z,1520528752.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:52.057Z,1520528752.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:52.419Z,1520528752.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:52.446Z,1520528752.446 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:52.446Z,1520528752.446 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 187
2018-03-08T17:05:52.446Z,1520528752.446 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T17:05:52.448Z,1520528752.448 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:52.448Z,1520528752.448 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 187
2018-03-08T17:05:52.448Z,1520528752.448 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T17:05:52.450Z,1520528752.450 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:52.450Z,1520528752.450 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 187
2018-03-08T17:05:52.450Z,1520528752.450 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T17:05:52.461Z,1520528752.461 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T17:05:52.462Z,1520528752.462 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T17:05:52.462Z,1520528752.462 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T17:05:52.819Z,1520528752.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:52.864Z,1520528752.864 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T17:05:52.864Z,1520528752.864 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 187
2018-03-08T17:05:52.865Z,1520528752.865 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T17:05:52.865Z,1520528752.865 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 187
2018-03-08T17:05:52.865Z,1520528752.865 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T17:05:52.865Z,1520528752.865 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 187
2018-03-08T17:05:53.243Z,1520528753.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:53.265Z,1520528753.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T17:05:53.265Z,1520528753.265 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:05:53.266Z,1520528753.266 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:05:53.266Z,1520528753.266 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T17:05:53.266Z,1520528753.266 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:05:53.267Z,1520528753.267 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:05:53.267Z,1520528753.267 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T17:05:53.267Z,1520528753.267 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:05:53.268Z,1520528753.268 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:05:53.641Z,1520528753.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:53.659Z,1520528753.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T17:05:53.660Z,1520528753.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:54.042Z,1520528754.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:54.057Z,1520528754.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T17:05:54.058Z,1520528754.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:54.431Z,1520528754.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:54.458Z,1520528754.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T17:05:54.459Z,1520528754.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:54.818Z,1520528754.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:54.854Z,1520528754.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T17:05:54.855Z,1520528754.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:55.244Z,1520528755.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:55.259Z,1520528755.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T17:05:55.260Z,1520528755.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:55.644Z,1520528755.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:55.659Z,1520528755.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T17:05:55.660Z,1520528755.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:56.042Z,1520528756.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:56.057Z,1520528756.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T17:05:56.058Z,1520528756.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:56.419Z,1520528756.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:56.456Z,1520528756.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T17:05:56.457Z,1520528756.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:56.823Z,1520528756.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:56.854Z,1520528756.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T17:05:56.855Z,1520528756.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:57.229Z,1520528757.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:57.256Z,1520528757.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T17:05:57.257Z,1520528757.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:57.641Z,1520528757.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:57.664Z,1520528757.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T17:05:57.665Z,1520528757.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:58.043Z,1520528758.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:58.062Z,1520528758.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T17:05:58.063Z,1520528758.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:58.419Z,1520528758.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:58.454Z,1520528758.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T17:05:58.455Z,1520528758.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:58.819Z,1520528758.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:58.857Z,1520528758.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T17:05:58.858Z,1520528758.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:59.241Z,1520528759.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:59.262Z,1520528759.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T17:05:59.263Z,1520528759.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:05:59.641Z,1520528759.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:05:59.656Z,1520528759.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T17:05:59.657Z,1520528759.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:00.032Z,1520528760.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:00.061Z,1520528760.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T17:06:00.062Z,1520528760.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:00.423Z,1520528760.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:00.454Z,1520528760.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T17:06:00.455Z,1520528760.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:00.826Z,1520528760.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:00.853Z,1520528760.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T17:06:00.854Z,1520528760.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:01.242Z,1520528761.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:01.257Z,1520528761.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T17:06:01.258Z,1520528761.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:01.645Z,1520528761.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:01.660Z,1520528761.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T17:06:01.661Z,1520528761.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:02.029Z,1520528762.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:02.074Z,1520528762.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T17:06:02.075Z,1520528762.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:02.419Z,1520528762.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:02.466Z,1520528762.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T17:06:02.467Z,1520528762.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:02.824Z,1520528762.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:02.855Z,1520528762.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T17:06:02.856Z,1520528762.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:03.231Z,1520528763.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:03.282Z,1520528763.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T17:06:03.283Z,1520528763.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:03.653Z,1520528763.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:03.679Z,1520528763.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T17:06:03.680Z,1520528763.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:04.041Z,1520528764.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:04.070Z,1520528764.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T17:06:04.071Z,1520528764.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:04.429Z,1520528764.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:04.444Z,1520528764.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T17:06:04.477Z,1520528764.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:04.835Z,1520528764.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:04.850Z,1520528764.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T17:06:04.851Z,1520528764.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:05.262Z,1520528765.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:05.289Z,1520528765.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T17:06:05.290Z,1520528765.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:05.635Z,1520528765.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:05.655Z,1520528765.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T17:06:05.656Z,1520528765.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:06.032Z,1520528766.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:06.054Z,1520528766.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T17:06:06.055Z,1520528766.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:09.145Z,1520528769.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:09.160Z,1520528769.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2018-03-08T17:06:09.177Z,1520528769.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:09.272Z,1520528769.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:09.306Z,1520528769.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T17:06:09.307Z,1520528769.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:09.653Z,1520528769.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:09.683Z,1520528769.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T17:06:09.684Z,1520528769.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:10.049Z,1520528770.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:10.064Z,1520528770.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T17:06:10.085Z,1520528770.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:10.457Z,1520528770.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:10.487Z,1520528770.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T17:06:10.489Z,1520528770.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:10.837Z,1520528770.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:10.852Z,1520528770.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T17:06:10.853Z,1520528770.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:11.238Z,1520528771.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:11.257Z,1520528771.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T17:06:11.258Z,1520528771.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:11.641Z,1520528771.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:11.656Z,1520528771.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T17:06:11.657Z,1520528771.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:12.037Z,1520528772.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:12.052Z,1520528772.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T17:06:12.053Z,1520528772.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:12.453Z,1520528772.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:12.485Z,1520528772.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:12.849Z,1520528772.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:12.865Z,1520528772.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:13.245Z,1520528773.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:13.260Z,1520528773.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:13.642Z,1520528773.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:13.659Z,1520528773.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:14.042Z,1520528774.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:14.063Z,1520528774.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:14.444Z,1520528774.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:14.465Z,1520528774.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:14.837Z,1520528774.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:14.892Z,1520528774.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:15.249Z,1520528775.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:15.265Z,1520528775.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:15.649Z,1520528775.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:15.671Z,1520528775.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:16.053Z,1520528776.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:16.096Z,1520528776.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:16.441Z,1520528776.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:16.457Z,1520528776.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:16.840Z,1520528776.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:16.855Z,1520528776.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:17.251Z,1520528777.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:17.267Z,1520528777.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:17.653Z,1520528777.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:17.668Z,1520528777.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:18.043Z,1520528778.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:18.070Z,1520528778.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:18.444Z,1520528778.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:18.461Z,1520528778.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:18.842Z,1520528778.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:18.859Z,1520528778.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:19.252Z,1520528779.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:19.274Z,1520528779.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:19.650Z,1520528779.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:19.666Z,1520528779.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:20.053Z,1520528780.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:20.069Z,1520528780.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:20.427Z,1520528780.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:20.453Z,1520528780.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:20.844Z,1520528780.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:20.859Z,1520528780.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:21.253Z,1520528781.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:21.274Z,1520528781.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:21.652Z,1520528781.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:21.667Z,1520528781.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:22.054Z,1520528782.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:22.070Z,1520528782.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:22.440Z,1520528782.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:22.456Z,1520528782.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:22.833Z,1520528782.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:22.865Z,1520528782.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:23.253Z,1520528783.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:23.269Z,1520528783.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:23.653Z,1520528783.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:23.668Z,1520528783.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:24.053Z,1520528784.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:24.074Z,1520528784.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:24.442Z,1520528784.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:24.463Z,1520528784.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:24.839Z,1520528784.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:24.859Z,1520528784.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:25.249Z,1520528785.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:25.265Z,1520528785.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:25.653Z,1520528785.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:25.669Z,1520528785.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:26.053Z,1520528786.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:26.069Z,1520528786.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:26.439Z,1520528786.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:26.461Z,1520528786.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:26.827Z,1520528786.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:26.863Z,1520528786.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:27.253Z,1520528787.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:27.268Z,1520528787.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:27.652Z,1520528787.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:27.674Z,1520528787.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:28.057Z,1520528788.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:28.080Z,1520528788.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:28.430Z,1520528788.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:28.474Z,1520528788.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:28.834Z,1520528788.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:28.866Z,1520528788.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:29.254Z,1520528789.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:29.269Z,1520528789.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:29.653Z,1520528789.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:29.668Z,1520528789.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:30.048Z,1520528790.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:30.063Z,1520528790.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:30.435Z,1520528790.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:30.463Z,1520528790.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:30.831Z,1520528790.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:30.858Z,1520528790.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:31.241Z,1520528791.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:31.263Z,1520528791.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:31.658Z,1520528791.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:31.673Z,1520528791.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:32.049Z,1520528792.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:32.065Z,1520528792.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:32.431Z,1520528792.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:32.457Z,1520528792.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:32.831Z,1520528792.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:32.859Z,1520528792.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:33.249Z,1520528793.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:33.265Z,1520528793.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:33.653Z,1520528793.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:33.668Z,1520528793.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:34.057Z,1520528794.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:34.073Z,1520528794.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:34.431Z,1520528794.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:34.471Z,1520528794.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:34.834Z,1520528794.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:34.866Z,1520528794.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:35.254Z,1520528795.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:35.270Z,1520528795.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:35.654Z,1520528795.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:35.674Z,1520528795.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:36.040Z,1520528796.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:36.066Z,1520528796.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:36.430Z,1520528796.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:36.466Z,1520528796.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:36.835Z,1520528796.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:36.866Z,1520528796.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:37.241Z,1520528797.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:37.275Z,1520528797.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:37.659Z,1520528797.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:37.674Z,1520528797.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:38.053Z,1520528798.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:38.069Z,1520528798.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:38.439Z,1520528798.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:38.466Z,1520528798.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:38.831Z,1520528798.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:38.867Z,1520528798.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:39.254Z,1520528799.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:39.276Z,1520528799.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:39.645Z,1520528799.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:39.690Z,1520528799.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:40.055Z,1520528800.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:40.070Z,1520528800.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:40.430Z,1520528800.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:40.467Z,1520528800.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:40.833Z,1520528800.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:40.893Z,1520528800.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:41.257Z,1520528801.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:41.290Z,1520528801.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:41.656Z,1520528801.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:41.679Z,1520528801.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:42.055Z,1520528802.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:42.078Z,1520528802.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:42.439Z,1520528802.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:42.470Z,1520528802.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:42.839Z,1520528802.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:42.868Z,1520528802.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:43.256Z,1520528803.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:43.271Z,1520528803.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:43.657Z,1520528803.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:43.672Z,1520528803.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:44.055Z,1520528804.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:44.070Z,1520528804.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:44.439Z,1520528804.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:44.467Z,1520528804.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:44.832Z,1520528804.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:44.847Z,1520528804.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:45.246Z,1520528805.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:45.279Z,1520528805.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:45.654Z,1520528805.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:45.669Z,1520528805.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:46.041Z,1520528806.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:46.070Z,1520528806.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:46.439Z,1520528806.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:46.469Z,1520528806.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:46.835Z,1520528806.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:46.862Z,1520528806.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:47.261Z,1520528807.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:47.276Z,1520528807.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:47.660Z,1520528807.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:47.683Z,1520528807.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:48.049Z,1520528808.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:48.078Z,1520528808.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:48.439Z,1520528808.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:48.471Z,1520528808.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:48.838Z,1520528808.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:48.875Z,1520528808.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:49.249Z,1520528809.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:49.282Z,1520528809.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:49.649Z,1520528809.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:49.681Z,1520528809.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:50.049Z,1520528810.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:50.077Z,1520528810.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:50.438Z,1520528810.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:50.453Z,1520528810.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:50.841Z,1520528810.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:50.856Z,1520528810.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:51.245Z,1520528811.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:51.261Z,1520528811.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:51.653Z,1520528811.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:51.686Z,1520528811.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:52.053Z,1520528812.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:52.096Z,1520528812.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:52.440Z,1520528812.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:52.490Z,1520528812.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:52.843Z,1520528812.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:52.866Z,1520528812.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:53.249Z,1520528813.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:53.265Z,1520528813.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:53.649Z,1520528813.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:53.665Z,1520528813.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:54.048Z,1520528814.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:54.070Z,1520528814.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:54.443Z,1520528814.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:54.494Z,1520528814.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:54.846Z,1520528814.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:54.861Z,1520528814.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:55.248Z,1520528815.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:55.263Z,1520528815.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:55.649Z,1520528815.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:55.665Z,1520528815.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:56.049Z,1520528816.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:56.064Z,1520528816.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:56.439Z,1520528816.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:56.455Z,1520528816.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:56.843Z,1520528816.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:56.861Z,1520528816.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:57.248Z,1520528817.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:57.264Z,1520528817.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:57.649Z,1520528817.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:57.664Z,1520528817.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:58.045Z,1520528818.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:58.061Z,1520528818.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:58.440Z,1520528818.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:58.455Z,1520528818.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:58.839Z,1520528818.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:58.854Z,1520528818.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:59.249Z,1520528819.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:59.265Z,1520528819.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:06:59.649Z,1520528819.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:06:59.665Z,1520528819.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:00.049Z,1520528820.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:00.070Z,1520528820.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:00.443Z,1520528820.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:00.459Z,1520528820.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:00.840Z,1520528820.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:00.855Z,1520528820.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:01.249Z,1520528821.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:01.264Z,1520528821.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:01.650Z,1520528821.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:01.671Z,1520528821.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:02.048Z,1520528822.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:02.064Z,1520528822.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:02.439Z,1520528822.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:02.455Z,1520528822.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:02.844Z,1520528822.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:02.860Z,1520528822.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:03.249Z,1520528823.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:03.265Z,1520528823.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:03.649Z,1520528823.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:03.665Z,1520528823.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:04.049Z,1520528824.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:04.065Z,1520528824.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:04.441Z,1520528824.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:04.464Z,1520528824.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:04.838Z,1520528824.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:04.871Z,1520528824.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:07.958Z,1520528827.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:07.997Z,1520528827.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:08.104Z,1520528828.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:08.154Z,1520528828.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:08.477Z,1520528828.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:08.502Z,1520528828.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:08.867Z,1520528828.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:08.882Z,1520528828.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:09.267Z,1520528829.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:09.287Z,1520528829.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:09.664Z,1520528829.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:09.679Z,1520528829.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:10.063Z,1520528830.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:10.079Z,1520528830.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:10.466Z,1520528830.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:10.482Z,1520528830.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:10.877Z,1520528830.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:10.892Z,1520528830.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:11.265Z,1520528831.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:11.280Z,1520528831.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:11.664Z,1520528831.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:11.679Z,1520528831.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:12.061Z,1520528832.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:12.077Z,1520528832.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:12.464Z,1520528832.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:12.481Z,1520528832.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:12.864Z,1520528832.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:12.879Z,1520528832.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:13.277Z,1520528833.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:13.310Z,1520528833.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:13.677Z,1520528833.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:13.709Z,1520528833.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:14.072Z,1520528834.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:14.088Z,1520528834.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:14.467Z,1520528834.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:14.482Z,1520528834.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:14.867Z,1520528834.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:14.883Z,1520528834.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:15.273Z,1520528835.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:15.291Z,1520528835.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:15.673Z,1520528835.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:15.690Z,1520528835.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:16.073Z,1520528836.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:16.089Z,1520528836.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:16.468Z,1520528836.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:16.483Z,1520528836.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:16.866Z,1520528836.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:16.889Z,1520528836.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:17.273Z,1520528837.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:17.322Z,1520528837.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:17.671Z,1520528837.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:17.687Z,1520528837.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:18.072Z,1520528838.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:18.090Z,1520528838.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:18.464Z,1520528838.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:18.480Z,1520528838.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:18.859Z,1520528838.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:18.889Z,1520528838.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:19.272Z,1520528839.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:19.290Z,1520528839.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:19.672Z,1520528839.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:19.688Z,1520528839.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:20.072Z,1520528840.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:20.088Z,1520528840.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:20.467Z,1520528840.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:20.490Z,1520528840.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:20.852Z,1520528840.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:20.898Z,1520528840.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:21.272Z,1520528841.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:21.291Z,1520528841.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:21.676Z,1520528841.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:21.691Z,1520528841.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:22.078Z,1520528842.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:22.093Z,1520528842.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:22.467Z,1520528842.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:22.483Z,1520528842.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:22.867Z,1520528842.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:22.882Z,1520528842.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:23.274Z,1520528843.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:23.289Z,1520528843.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:23.676Z,1520528843.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:23.692Z,1520528843.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:24.076Z,1520528844.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:24.092Z,1520528844.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:24.464Z,1520528844.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:24.480Z,1520528844.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:24.859Z,1520528844.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:24.883Z,1520528844.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:25.272Z,1520528845.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:25.288Z,1520528845.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:25.677Z,1520528845.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:25.692Z,1520528845.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:26.093Z,1520528846.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:26.129Z,1520528846.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:26.466Z,1520528846.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:26.487Z,1520528846.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:26.851Z,1520528846.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:26.885Z,1520528846.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:27.255Z,1520528847.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:27.287Z,1520528847.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:27.668Z,1520528847.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:27.684Z,1520528847.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:28.051Z,1520528848.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:28.078Z,1520528848.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:28.473Z,1520528848.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:28.489Z,1520528848.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:28.877Z,1520528848.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:28.899Z,1520528848.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:29.278Z,1520528849.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:29.301Z,1520528849.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:29.655Z,1520528849.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:29.703Z,1520528849.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:30.058Z,1520528850.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:30.085Z,1520528850.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:30.454Z,1520528850.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:30.482Z,1520528850.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:30.855Z,1520528850.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:30.881Z,1520528850.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:31.273Z,1520528851.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:31.289Z,1520528851.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:31.675Z,1520528851.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:31.691Z,1520528851.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:32.077Z,1520528852.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:32.093Z,1520528852.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:32.463Z,1520528852.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:32.491Z,1520528852.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:32.851Z,1520528852.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:32.893Z,1520528852.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:33.265Z,1520528853.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:33.299Z,1520528853.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:33.677Z,1520528853.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:33.696Z,1520528853.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:34.077Z,1520528854.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:34.097Z,1520528854.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:34.457Z,1520528854.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:34.489Z,1520528854.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:34.859Z,1520528854.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:34.895Z,1520528854.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:35.269Z,1520528855.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:35.298Z,1520528855.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:35.687Z,1520528855.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:35.703Z,1520528855.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:36.065Z,1520528856.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:36.096Z,1520528856.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:36.463Z,1520528856.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:36.480Z,1520528856.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:36.862Z,1520528856.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:36.879Z,1520528856.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:37.274Z,1520528857.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:37.305Z,1520528857.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:37.677Z,1520528857.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:37.709Z,1520528857.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:38.069Z,1520528858.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:38.086Z,1520528858.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:38.466Z,1520528858.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:38.481Z,1520528858.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:38.867Z,1520528858.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:38.883Z,1520528858.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:39.268Z,1520528859.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:39.284Z,1520528859.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:39.673Z,1520528859.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:39.688Z,1520528859.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:40.069Z,1520528860.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:40.085Z,1520528860.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:40.467Z,1520528860.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:40.483Z,1520528860.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:40.859Z,1520528860.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:40.886Z,1520528860.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:41.274Z,1520528861.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:41.291Z,1520528861.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:41.672Z,1520528861.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:41.694Z,1520528861.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:42.073Z,1520528862.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:42.099Z,1520528862.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:42.469Z,1520528862.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:42.485Z,1520528862.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:42.864Z,1520528862.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:42.887Z,1520528862.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:43.276Z,1520528863.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:43.291Z,1520528863.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:43.677Z,1520528863.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:43.693Z,1520528863.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:44.077Z,1520528864.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:44.093Z,1520528864.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:44.467Z,1520528864.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:44.483Z,1520528864.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:44.868Z,1520528864.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:44.891Z,1520528864.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:45.276Z,1520528865.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:45.299Z,1520528865.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:45.675Z,1520528865.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:45.703Z,1520528865.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:46.079Z,1520528866.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:46.095Z,1520528866.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:46.467Z,1520528866.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:46.483Z,1520528866.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:46.854Z,1520528866.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:46.881Z,1520528866.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:47.278Z,1520528867.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:47.294Z,1520528867.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:47.680Z,1520528867.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:47.703Z,1520528867.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:48.077Z,1520528868.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:48.093Z,1520528868.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:48.451Z,1520528868.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:48.479Z,1520528868.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:48.855Z,1520528868.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:48.883Z,1520528868.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:49.273Z,1520528869.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:49.288Z,1520528869.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:49.682Z,1520528869.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:49.698Z,1520528869.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:50.077Z,1520528870.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:50.093Z,1520528870.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:50.455Z,1520528870.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:50.481Z,1520528870.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:50.859Z,1520528870.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:50.888Z,1520528870.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:51.277Z,1520528871.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:51.293Z,1520528871.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:51.681Z,1520528871.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:51.702Z,1520528871.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:52.082Z,1520528872.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:52.102Z,1520528872.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:52.459Z,1520528872.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:52.486Z,1520528872.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:52.850Z,1520528872.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:52.886Z,1520528872.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:53.278Z,1520528873.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:53.294Z,1520528873.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:53.681Z,1520528873.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:53.699Z,1520528873.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:54.077Z,1520528874.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:54.099Z,1520528874.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:54.456Z,1520528874.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:54.502Z,1520528874.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:54.855Z,1520528874.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:54.881Z,1520528874.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:55.272Z,1520528875.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:55.295Z,1520528875.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:55.683Z,1520528875.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:55.707Z,1520528875.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:56.077Z,1520528876.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:56.093Z,1520528876.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:56.456Z,1520528876.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:56.486Z,1520528876.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:56.859Z,1520528876.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:56.887Z,1520528876.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:57.273Z,1520528877.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:57.289Z,1520528877.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:57.679Z,1520528877.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:57.704Z,1520528877.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:58.093Z,1520528878.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:58.138Z,1520528878.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:58.455Z,1520528878.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:58.487Z,1520528878.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:58.858Z,1520528878.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:58.897Z,1520528878.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:59.259Z,1520528879.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:59.295Z,1520528879.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:07:59.654Z,1520528879.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:07:59.691Z,1520528879.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:00.058Z,1520528880.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:00.073Z,1520528880.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:00.474Z,1520528880.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:00.507Z,1520528880.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:00.895Z,1520528880.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:00.911Z,1520528880.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:01.268Z,1520528881.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:01.291Z,1520528881.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:01.673Z,1520528881.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:01.746Z,1520528881.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:02.056Z,1520528882.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:02.072Z,1520528882.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:02.456Z,1520528882.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:02.472Z,1520528882.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:02.855Z,1520528882.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:02.871Z,1520528882.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:03.269Z,1520528883.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:03.285Z,1520528883.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:03.673Z,1520528883.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:03.695Z,1520528883.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:04.069Z,1520528884.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:04.085Z,1520528884.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:04.088Z,1520528884.088 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T17:08:04.088Z,1520528884.088 [Default:CheckIn:C.Wait] Stopped
2018-03-08T17:08:04.088Z,1520528884.088 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T17:08:04.088Z,1520528884.088 [Default:CheckIn:D] Running Loop=1
2018-03-08T17:08:04.483Z,1520528884.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:04.553Z,1520528884.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:04.556Z,1520528884.556 [Default:CheckIn:D] Stopped
2018-03-08T17:08:04.556Z,1520528884.556 [Default:CheckIn:E] Running Loop=1
2018-03-08T17:08:04.858Z,1520528884.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:04.873Z,1520528884.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:04.876Z,1520528884.876 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 562.329167 min 
2018-03-08T17:08:04.876Z,1520528884.876 [Default:CheckIn:E] Stopped
2018-03-08T17:08:04.876Z,1520528884.876 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T17:08:04.877Z,1520528884.877 [Default:CheckIn] Stopped
2018-03-08T17:08:04.877Z,1520528884.877 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T17:08:04.877Z,1520528884.877 [Default:CheckIn](INFO): Running loop #55
2018-03-08T17:08:04.877Z,1520528884.877 [Default:CheckIn] Running Loop=55
2018-03-08T17:08:04.877Z,1520528884.877 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T17:08:04.877Z,1520528884.877 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T17:08:08.487Z,1520528888.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:08.511Z,1520528888.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:08.636Z,1520528888.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:08.671Z,1520528888.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:09.013Z,1520528889.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:09.043Z,1520528889.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:09.395Z,1520528889.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:09.411Z,1520528889.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:09.794Z,1520528889.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:09.814Z,1520528889.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:10.194Z,1520528890.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:10.217Z,1520528890.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:10.606Z,1520528890.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:10.654Z,1520528890.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:11.001Z,1520528891.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:11.017Z,1520528891.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:11.400Z,1520528891.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:11.416Z,1520528891.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:11.798Z,1520528891.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:11.813Z,1520528891.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:12.195Z,1520528892.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:12.218Z,1520528892.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:12.600Z,1520528892.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:12.616Z,1520528892.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:12.983Z,1520528892.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:13.023Z,1520528893.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:13.410Z,1520528893.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:13.425Z,1520528893.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:13.807Z,1520528893.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:13.823Z,1520528893.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:14.191Z,1520528894.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:14.226Z,1520528894.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:14.587Z,1520528894.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:14.620Z,1520528894.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:14.983Z,1520528894.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:15.022Z,1520528895.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:15.383Z,1520528895.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:15.419Z,1520528895.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:15.793Z,1520528895.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:15.827Z,1520528895.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:16.184Z,1520528896.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:16.200Z,1520528896.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:16.604Z,1520528896.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:16.639Z,1520528896.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:17.002Z,1520528897.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:17.029Z,1520528897.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:17.401Z,1520528897.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:17.428Z,1520528897.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:17.787Z,1520528897.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:17.803Z,1520528897.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:18.193Z,1520528898.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:18.227Z,1520528898.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:18.593Z,1520528898.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:18.631Z,1520528898.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:18.996Z,1520528898.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:19.012Z,1520528899.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:19.405Z,1520528899.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:19.439Z,1520528899.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:19.800Z,1520528899.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:19.815Z,1520528899.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:20.203Z,1520528900.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:20.219Z,1520528900.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:20.599Z,1520528900.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:20.618Z,1520528900.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:20.994Z,1520528900.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:21.016Z,1520528901.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:21.390Z,1520528901.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:21.443Z,1520528901.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:21.791Z,1520528901.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:21.814Z,1520528901.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:22.197Z,1520528902.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:22.213Z,1520528902.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:22.597Z,1520528902.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:22.620Z,1520528902.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:23.004Z,1520528903.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:23.050Z,1520528903.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:23.406Z,1520528903.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:23.427Z,1520528903.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:23.800Z,1520528903.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:23.815Z,1520528903.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:24.195Z,1520528904.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:24.225Z,1520528904.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:24.590Z,1520528904.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:24.616Z,1520528904.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:25.001Z,1520528905.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:25.016Z,1520528905.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:25.406Z,1520528905.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:25.422Z,1520528905.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:25.800Z,1520528905.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:25.828Z,1520528905.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:26.210Z,1520528906.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:26.230Z,1520528906.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:26.600Z,1520528906.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:26.616Z,1520528906.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:26.000Z,1520528907.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:27.022Z,1520528907.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:27.396Z,1520528907.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:27.412Z,1520528907.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:27.794Z,1520528907.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:27.816Z,1520528907.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:28.198Z,1520528908.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:28.214Z,1520528908.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:28.602Z,1520528908.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:28.619Z,1520528908.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:29.004Z,1520528909.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:29.026Z,1520528909.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:29.410Z,1520528909.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:29.427Z,1520528909.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:29.796Z,1520528909.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:29.812Z,1520528909.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:30.197Z,1520528910.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:30.231Z,1520528910.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:30.587Z,1520528910.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:30.613Z,1520528910.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:30.983Z,1520528910.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:31.023Z,1520528911.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:31.407Z,1520528911.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:31.430Z,1520528911.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:31.806Z,1520528911.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:31.826Z,1520528911.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:32.205Z,1520528912.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:32.225Z,1520528912.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:32.592Z,1520528912.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:32.626Z,1520528912.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:32.985Z,1520528912.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:33.019Z,1520528913.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:33.393Z,1520528913.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:33.428Z,1520528913.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:33.788Z,1520528913.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:33.834Z,1520528913.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:34.188Z,1520528914.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:34.226Z,1520528914.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:34.595Z,1520528914.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:34.631Z,1520528914.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:34.997Z,1520528914.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:35.039Z,1520528915.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:35.401Z,1520528915.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:35.436Z,1520528915.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:35.794Z,1520528915.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:35.812Z,1520528915.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:36.196Z,1520528916.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:36.212Z,1520528916.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:36.594Z,1520528916.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:36.610Z,1520528916.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:36.990Z,1520528916.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:37.006Z,1520528917.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:37.408Z,1520528917.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:37.435Z,1520528917.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:37.796Z,1520528917.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:37.837Z,1520528917.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:38.205Z,1520528918.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:38.236Z,1520528918.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:38.588Z,1520528918.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:38.621Z,1520528918.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:38.993Z,1520528918.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:39.011Z,1520528919.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:39.395Z,1520528919.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:39.414Z,1520528919.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:39.799Z,1520528919.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:39.815Z,1520528919.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:40.195Z,1520528920.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:40.210Z,1520528920.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:40.601Z,1520528920.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:40.617Z,1520528920.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:40.000Z,1520528921.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:41.015Z,1520528921.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:41.401Z,1520528921.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:41.416Z,1520528921.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:41.795Z,1520528921.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:41.810Z,1520528921.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:42.194Z,1520528922.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:42.225Z,1520528922.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:42.600Z,1520528922.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:42.622Z,1520528922.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:42.997Z,1520528922.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:43.013Z,1520528923.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:43.402Z,1520528923.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:43.423Z,1520528923.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:43.804Z,1520528923.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:43.843Z,1520528923.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:44.206Z,1520528924.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:44.222Z,1520528924.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:44.598Z,1520528924.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:44.619Z,1520528924.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:44.995Z,1520528924.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:45.018Z,1520528925.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:45.401Z,1520528925.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:45.417Z,1520528925.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:45.802Z,1520528925.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:45.850Z,1520528925.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:46.199Z,1520528926.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:46.243Z,1520528926.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:46.604Z,1520528926.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:46.620Z,1520528926.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:47.008Z,1520528927.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:47.023Z,1520528927.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:47.409Z,1520528927.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:47.444Z,1520528927.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:47.800Z,1520528927.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:47.850Z,1520528927.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:48.196Z,1520528928.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:48.212Z,1520528928.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:48.583Z,1520528928.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:48.615Z,1520528928.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:48.999Z,1520528928.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:49.015Z,1520528929.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:49.405Z,1520528929.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:49.421Z,1520528929.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:49.808Z,1520528929.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:49.823Z,1520528929.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:50.209Z,1520528930.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:50.230Z,1520528930.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:50.598Z,1520528930.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:50.613Z,1520528930.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:50.981Z,1520528930.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:51.015Z,1520528931.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:51.397Z,1520528931.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:51.412Z,1520528931.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:51.783Z,1520528931.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:51.825Z,1520528931.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:52.199Z,1520528932.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:52.214Z,1520528932.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:52.610Z,1520528932.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:52.630Z,1520528932.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:53.006Z,1520528933.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:53.021Z,1520528933.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:53.410Z,1520528933.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:53.430Z,1520528933.430 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:53.430Z,1520528933.430 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 188
2018-03-08T17:08:53.430Z,1520528933.430 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T17:08:53.432Z,1520528933.432 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:53.432Z,1520528933.432 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 188
2018-03-08T17:08:53.432Z,1520528933.432 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T17:08:53.472Z,1520528933.472 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:53.472Z,1520528933.472 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 188
2018-03-08T17:08:53.472Z,1520528933.472 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T17:08:53.496Z,1520528933.496 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T17:08:53.496Z,1520528933.496 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T17:08:53.496Z,1520528933.496 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T17:08:53.798Z,1520528933.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:53.824Z,1520528933.824 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T17:08:53.824Z,1520528933.824 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 188
2018-03-08T17:08:53.824Z,1520528933.824 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T17:08:53.824Z,1520528933.824 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 188
2018-03-08T17:08:53.825Z,1520528933.825 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T17:08:53.825Z,1520528933.825 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 188
2018-03-08T17:08:54.185Z,1520528934.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:54.216Z,1520528934.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T17:08:54.221Z,1520528934.221 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:08:54.221Z,1520528934.221 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:08:54.221Z,1520528934.221 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T17:08:54.222Z,1520528934.222 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:08:54.222Z,1520528934.222 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:08:54.222Z,1520528934.222 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T17:08:54.223Z,1520528934.223 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:08:54.223Z,1520528934.223 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:08:54.582Z,1520528934.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:54.618Z,1520528934.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T17:08:54.619Z,1520528934.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:54.988Z,1520528934.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:55.020Z,1520528935.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T17:08:55.021Z,1520528935.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:55.405Z,1520528935.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:55.426Z,1520528935.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T17:08:55.426Z,1520528935.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:55.805Z,1520528935.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:55.820Z,1520528935.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T17:08:55.821Z,1520528935.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:56.201Z,1520528936.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:56.225Z,1520528936.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T17:08:56.226Z,1520528936.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:56.583Z,1520528936.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:56.615Z,1520528936.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T17:08:56.616Z,1520528936.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:56.985Z,1520528936.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:57.022Z,1520528937.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T17:08:57.023Z,1520528937.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:57.387Z,1520528937.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:57.422Z,1520528937.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T17:08:57.423Z,1520528937.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:57.787Z,1520528937.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:57.823Z,1520528937.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T17:08:57.823Z,1520528937.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:58.183Z,1520528938.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:58.242Z,1520528938.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T17:08:58.243Z,1520528938.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:58.602Z,1520528938.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:58.654Z,1520528938.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T17:08:58.655Z,1520528938.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:59.005Z,1520528939.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:59.034Z,1520528939.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T17:08:59.035Z,1520528939.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:59.401Z,1520528939.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:59.428Z,1520528939.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T17:08:59.429Z,1520528939.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:08:59.797Z,1520528939.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:08:59.835Z,1520528939.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T17:08:59.836Z,1520528939.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:00.192Z,1520528940.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:00.233Z,1520528940.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T17:09:00.234Z,1520528940.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:00.596Z,1520528940.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:00.611Z,1520528940.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T17:09:00.612Z,1520528940.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:00.993Z,1520528940.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:01.008Z,1520528941.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T17:09:01.009Z,1520528941.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:01.396Z,1520528941.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:01.412Z,1520528941.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T17:09:01.413Z,1520528941.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:01.806Z,1520528941.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:01.838Z,1520528941.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T17:09:01.839Z,1520528941.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:02.197Z,1520528942.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:02.213Z,1520528942.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T17:09:02.214Z,1520528942.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:02.593Z,1520528942.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:02.608Z,1520528942.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T17:09:02.609Z,1520528942.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:02.990Z,1520528942.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:03.008Z,1520528943.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T17:09:03.009Z,1520528943.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:03.391Z,1520528943.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:03.410Z,1520528943.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T17:09:03.411Z,1520528943.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:03.798Z,1520528943.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:03.815Z,1520528943.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T17:09:03.816Z,1520528943.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:04.194Z,1520528944.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:04.246Z,1520528944.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T17:09:04.247Z,1520528944.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:04.611Z,1520528944.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:04.646Z,1520528944.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T17:09:04.647Z,1520528944.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:05.008Z,1520528945.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:05.023Z,1520528945.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T17:09:05.024Z,1520528945.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:08.118Z,1520528948.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:08.149Z,1520528948.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-03-08T17:09:08.150Z,1520528948.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:08.250Z,1520528948.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:08.266Z,1520528948.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T17:09:08.267Z,1520528948.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:08.612Z,1520528948.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:08.627Z,1520528948.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T17:09:08.644Z,1520528948.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:09.004Z,1520528949.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:09.019Z,1520528949.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T17:09:09.020Z,1520528949.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:09.413Z,1520528949.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:09.454Z,1520528949.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T17:09:09.455Z,1520528949.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:09.802Z,1520528949.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:09.817Z,1520528949.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T17:09:09.818Z,1520528949.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:10.217Z,1520528950.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:10.232Z,1520528950.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T17:09:10.233Z,1520528950.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:10.616Z,1520528950.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:10.639Z,1520528950.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T17:09:10.640Z,1520528950.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:11.011Z,1520528951.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:11.059Z,1520528951.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T17:09:11.060Z,1520528951.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:11.413Z,1520528951.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:11.427Z,1520528951.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T17:09:11.428Z,1520528951.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:11.808Z,1520528951.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:11.823Z,1520528951.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T17:09:11.824Z,1520528951.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:12.211Z,1520528952.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:12.233Z,1520528952.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T17:09:12.234Z,1520528952.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:12.625Z,1520528952.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:12.668Z,1520528952.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T17:09:12.669Z,1520528952.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:13.014Z,1520528953.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:13.032Z,1520528953.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T17:09:13.033Z,1520528953.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:13.422Z,1520528953.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:13.442Z,1520528953.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:13.799Z,1520528953.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:13.826Z,1520528953.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:14.211Z,1520528954.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:14.230Z,1520528954.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:14.599Z,1520528954.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:14.627Z,1520528954.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:14.995Z,1520528954.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:15.032Z,1520528955.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:15.410Z,1520528955.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:15.430Z,1520528955.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:15.825Z,1520528955.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:15.840Z,1520528955.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:16.223Z,1520528956.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:16.238Z,1520528956.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:16.599Z,1520528956.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:16.626Z,1520528956.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:16.999Z,1520528956.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:17.026Z,1520528957.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:17.398Z,1520528957.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:17.425Z,1520528957.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:17.811Z,1520528957.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:17.826Z,1520528957.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:18.212Z,1520528958.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:18.228Z,1520528958.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:18.617Z,1520528958.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:18.633Z,1520528958.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:19.011Z,1520528959.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:19.035Z,1520528959.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:19.421Z,1520528959.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:19.442Z,1520528959.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:19.799Z,1520528959.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:19.830Z,1520528959.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:20.199Z,1520528960.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:20.227Z,1520528960.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:20.596Z,1520528960.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:20.635Z,1520528960.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:21.002Z,1520528961.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:21.029Z,1520528961.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:21.418Z,1520528961.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:21.433Z,1520528961.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:21.825Z,1520528961.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:21.841Z,1520528961.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:22.217Z,1520528962.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:22.237Z,1520528962.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:22.598Z,1520528962.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:22.631Z,1520528962.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:23.003Z,1520528963.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:23.037Z,1520528963.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:23.407Z,1520528963.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:23.454Z,1520528963.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:23.802Z,1520528963.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:23.829Z,1520528963.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:24.197Z,1520528964.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:24.229Z,1520528964.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:24.609Z,1520528964.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:24.642Z,1520528964.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:25.010Z,1520528965.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:25.058Z,1520528965.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:25.410Z,1520528965.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:25.437Z,1520528965.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:25.802Z,1520528965.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:25.835Z,1520528965.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:26.197Z,1520528966.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:26.229Z,1520528966.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:26.603Z,1520528966.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:26.639Z,1520528966.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:27.003Z,1520528967.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:27.036Z,1520528967.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:27.406Z,1520528967.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:27.433Z,1520528967.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:27.817Z,1520528967.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:27.846Z,1520528967.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:28.217Z,1520528968.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:28.242Z,1520528968.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:28.598Z,1520528968.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:28.619Z,1520528968.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:28.000Z,1520528969.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:29.015Z,1520528969.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:29.402Z,1520528969.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:29.422Z,1520528969.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:29.796Z,1520528969.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:29.813Z,1520528969.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:30.202Z,1520528970.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:30.223Z,1520528970.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:30.621Z,1520528970.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:30.645Z,1520528970.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:31.017Z,1520528971.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:31.047Z,1520528971.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:31.417Z,1520528971.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:31.446Z,1520528971.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:31.806Z,1520528971.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:31.827Z,1520528971.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:32.208Z,1520528972.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:32.224Z,1520528972.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:32.606Z,1520528972.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:32.622Z,1520528972.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:33.004Z,1520528973.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:33.019Z,1520528973.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:33.417Z,1520528973.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:33.447Z,1520528973.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:33.821Z,1520528973.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:33.844Z,1520528973.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:34.217Z,1520528974.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:34.247Z,1520528974.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:34.602Z,1520528974.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:34.618Z,1520528974.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:35.007Z,1520528975.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:35.023Z,1520528975.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:35.409Z,1520528975.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:35.425Z,1520528975.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:35.804Z,1520528975.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:35.827Z,1520528975.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:36.217Z,1520528976.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:36.262Z,1520528976.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:36.617Z,1520528976.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:36.651Z,1520528976.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:37.021Z,1520528977.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:37.059Z,1520528977.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:37.404Z,1520528977.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:37.450Z,1520528977.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:37.804Z,1520528977.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:37.819Z,1520528977.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:38.209Z,1520528978.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:38.225Z,1520528978.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:38.621Z,1520528978.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:38.653Z,1520528978.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:39.017Z,1520528979.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:39.032Z,1520528979.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:39.410Z,1520528979.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:39.426Z,1520528979.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:39.807Z,1520528979.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:39.823Z,1520528979.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:40.208Z,1520528980.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:40.223Z,1520528980.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:40.606Z,1520528980.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:40.622Z,1520528980.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:41.004Z,1520528981.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:41.019Z,1520528981.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:41.411Z,1520528981.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:41.427Z,1520528981.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:41.810Z,1520528981.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:41.826Z,1520528981.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:42.217Z,1520528982.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:42.251Z,1520528982.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:42.604Z,1520528982.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:42.619Z,1520528982.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:42.992Z,1520528982.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:43.041Z,1520528983.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:43.408Z,1520528983.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:43.424Z,1520528983.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:43.803Z,1520528983.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:43.819Z,1520528983.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:44.218Z,1520528984.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:44.252Z,1520528984.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:44.611Z,1520528984.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:44.651Z,1520528984.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:45.013Z,1520528985.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:45.029Z,1520528985.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:45.407Z,1520528985.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:45.428Z,1520528985.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:45.809Z,1520528985.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:45.826Z,1520528985.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:46.209Z,1520528986.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:46.225Z,1520528986.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:46.610Z,1520528986.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:46.626Z,1520528986.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:47.009Z,1520528987.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:47.025Z,1520528987.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:47.409Z,1520528987.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:47.424Z,1520528987.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:47.809Z,1520528987.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:47.837Z,1520528987.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:48.210Z,1520528988.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:48.233Z,1520528988.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:48.604Z,1520528988.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:48.639Z,1520528988.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:49.006Z,1520528989.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:49.022Z,1520528989.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:49.411Z,1520528989.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:49.450Z,1520528989.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:49.817Z,1520528989.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:49.843Z,1520528989.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:50.220Z,1520528990.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:50.236Z,1520528990.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:50.612Z,1520528990.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:50.628Z,1520528990.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:51.006Z,1520528991.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:51.027Z,1520528991.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:51.401Z,1520528991.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:51.429Z,1520528991.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:51.798Z,1520528991.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:51.834Z,1520528991.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:52.195Z,1520528992.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:52.231Z,1520528992.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:52.608Z,1520528992.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:52.635Z,1520528992.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:53.020Z,1520528993.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:53.045Z,1520528993.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:53.420Z,1520528993.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:53.443Z,1520528993.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:53.798Z,1520528993.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:53.843Z,1520528993.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:54.200Z,1520528994.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:54.220Z,1520528994.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:54.605Z,1520528994.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:54.620Z,1520528994.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:54.997Z,1520528994.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:55.013Z,1520528995.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:55.413Z,1520528995.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:55.438Z,1520528995.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:55.829Z,1520528995.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:55.862Z,1520528995.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:56.225Z,1520528996.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:56.241Z,1520528996.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:56.606Z,1520528996.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:56.633Z,1520528996.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:56.996Z,1520528996.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:57.011Z,1520528997.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:57.402Z,1520528997.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:57.422Z,1520528997.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:57.806Z,1520528997.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:57.822Z,1520528997.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:58.204Z,1520528998.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:58.219Z,1520528998.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:58.617Z,1520528998.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:58.647Z,1520528998.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:59.011Z,1520528999.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:59.026Z,1520528999.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:59.420Z,1520528999.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:59.451Z,1520528999.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:09:59.804Z,1520528999.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:09:59.819Z,1520528999.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:00.204Z,1520529000.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:00.220Z,1520529000.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:00.606Z,1520529000.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:00.645Z,1520529000.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:00.996Z,1520529000.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:01.047Z,1520529001.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:01.409Z,1520529001.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:01.425Z,1520529001.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:01.813Z,1520529001.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:01.834Z,1520529001.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:02.214Z,1520529002.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:02.250Z,1520529002.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:02.606Z,1520529002.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:02.626Z,1520529002.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:03.007Z,1520529003.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:03.022Z,1520529003.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:03.407Z,1520529003.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:03.423Z,1520529003.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:03.807Z,1520529003.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:03.823Z,1520529003.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:04.210Z,1520529004.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:04.230Z,1520529004.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:04.613Z,1520529004.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:04.629Z,1520529004.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:05.013Z,1520529005.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:05.029Z,1520529005.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:08.114Z,1520529008.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:08.129Z,1520529008.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:08.225Z,1520529008.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:08.241Z,1520529008.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:08.583Z,1520529008.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:08.618Z,1520529008.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:08.990Z,1520529008.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:09.035Z,1520529009.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:09.386Z,1520529009.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:09.416Z,1520529009.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:09.788Z,1520529009.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:09.819Z,1520529009.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:10.211Z,1520529010.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:10.226Z,1520529010.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:10.605Z,1520529010.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:10.621Z,1520529010.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:10.994Z,1520529010.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:11.030Z,1520529011.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:11.404Z,1520529011.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:11.420Z,1520529011.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:11.780Z,1520529011.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:11.818Z,1520529011.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:12.184Z,1520529012.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:12.218Z,1520529012.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:12.584Z,1520529012.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:12.631Z,1520529012.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:12.985Z,1520529012.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:13.027Z,1520529013.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:13.395Z,1520529013.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:13.419Z,1520529013.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:13.799Z,1520529013.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:13.829Z,1520529013.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:14.207Z,1520529014.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:14.230Z,1520529014.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:14.594Z,1520529014.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:14.623Z,1520529014.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:14.989Z,1520529014.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:15.029Z,1520529015.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:15.382Z,1520529015.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:15.401Z,1520529015.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:15.791Z,1520529015.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:15.830Z,1520529015.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:16.192Z,1520529016.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:16.208Z,1520529016.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:16.599Z,1520529016.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:16.631Z,1520529016.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:16.000Z,1520529017.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:17.031Z,1520529017.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:17.393Z,1520529017.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:17.414Z,1520529017.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:17.788Z,1520529017.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:17.804Z,1520529017.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:18.191Z,1520529018.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:18.215Z,1520529018.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:18.597Z,1520529018.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:18.638Z,1520529018.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:18.978Z,1520529018.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:19.006Z,1520529019.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:19.398Z,1520529019.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:19.417Z,1520529019.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:19.796Z,1520529019.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:19.818Z,1520529019.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:20.189Z,1520529020.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:20.221Z,1520529020.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:20.592Z,1520529020.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:20.607Z,1520529020.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:20.974Z,1520529020.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:21.014Z,1520529021.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:21.375Z,1520529021.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:21.408Z,1520529021.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:21.775Z,1520529021.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:21.810Z,1520529021.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:22.172Z,1520529022.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:22.219Z,1520529022.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:22.602Z,1520529022.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:22.622Z,1520529022.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:23.006Z,1520529023.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:23.026Z,1520529023.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:23.401Z,1520529023.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:23.417Z,1520529023.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:23.778Z,1520529023.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:23.810Z,1520529023.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:24.178Z,1520529024.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:24.210Z,1520529024.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:24.580Z,1520529024.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:24.614Z,1520529024.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:24.980Z,1520529024.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:25.015Z,1520529025.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:25.387Z,1520529025.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:25.414Z,1520529025.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:25.789Z,1520529025.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:25.826Z,1520529025.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:26.186Z,1520529026.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:26.225Z,1520529026.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:26.580Z,1520529026.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:26.615Z,1520529026.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:26.978Z,1520529026.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:27.017Z,1520529027.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:27.382Z,1520529027.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:27.415Z,1520529027.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:27.780Z,1520529027.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:27.822Z,1520529027.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:28.175Z,1520529028.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:28.217Z,1520529028.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:28.603Z,1520529028.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:28.619Z,1520529028.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:28.990Z,1520529028.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:29.027Z,1520529029.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:29.395Z,1520529029.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:29.422Z,1520529029.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:29.788Z,1520529029.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:29.819Z,1520529029.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:30.186Z,1520529030.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:30.202Z,1520529030.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:30.586Z,1520529030.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:30.601Z,1520529030.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:30.978Z,1520529030.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:31.019Z,1520529031.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:31.392Z,1520529031.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:31.408Z,1520529031.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:31.797Z,1520529031.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:31.812Z,1520529031.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:32.201Z,1520529032.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:32.233Z,1520529032.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:32.582Z,1520529032.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:32.623Z,1520529032.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:32.982Z,1520529032.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:33.011Z,1520529033.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:33.386Z,1520529033.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:33.407Z,1520529033.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:33.790Z,1520529033.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:33.807Z,1520529033.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:34.190Z,1520529034.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:34.209Z,1520529034.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:34.592Z,1520529034.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:34.607Z,1520529034.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:34.994Z,1520529034.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:35.009Z,1520529035.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:35.391Z,1520529035.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:35.406Z,1520529035.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:35.778Z,1520529035.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:35.821Z,1520529035.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:36.187Z,1520529036.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:36.230Z,1520529036.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:36.585Z,1520529036.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:36.600Z,1520529036.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:36.983Z,1520529036.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:37.005Z,1520529037.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:37.389Z,1520529037.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:37.408Z,1520529037.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:37.796Z,1520529037.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:37.810Z,1520529037.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:38.193Z,1520529038.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:38.230Z,1520529038.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:38.590Z,1520529038.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:38.610Z,1520529038.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:38.987Z,1520529038.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:39.006Z,1520529039.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:39.389Z,1520529039.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:39.404Z,1520529039.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:39.785Z,1520529039.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:39.813Z,1520529039.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:40.173Z,1520529040.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:40.201Z,1520529040.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:40.599Z,1520529040.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:40.615Z,1520529040.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:41.000Z,1520529041.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:41.019Z,1520529041.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:41.399Z,1520529041.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:41.414Z,1520529041.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:41.790Z,1520529041.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:41.805Z,1520529041.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:42.175Z,1520529042.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:42.222Z,1520529042.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:42.571Z,1520529042.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:42.610Z,1520529042.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:42.980Z,1520529042.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:43.026Z,1520529043.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:43.398Z,1520529043.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:43.418Z,1520529043.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:43.807Z,1520529043.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:43.822Z,1520529043.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:44.197Z,1520529044.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:44.213Z,1520529044.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:44.577Z,1520529044.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:44.604Z,1520529044.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:44.973Z,1520529044.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:45.011Z,1520529045.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:45.379Z,1520529045.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:45.414Z,1520529045.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:45.776Z,1520529045.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:45.818Z,1520529045.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:46.182Z,1520529046.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:46.209Z,1520529046.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:46.602Z,1520529046.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:46.617Z,1520529046.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:47.000Z,1520529047.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:47.024Z,1520529047.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:47.400Z,1520529047.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:47.415Z,1520529047.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:47.781Z,1520529047.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:47.814Z,1520529047.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:48.182Z,1520529048.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:48.211Z,1520529048.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:48.575Z,1520529048.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:48.616Z,1520529048.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:48.980Z,1520529048.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:49.010Z,1520529049.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:49.388Z,1520529049.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:49.422Z,1520529049.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:49.799Z,1520529049.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:49.814Z,1520529049.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:50.198Z,1520529050.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:50.221Z,1520529050.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:50.575Z,1520529050.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:50.607Z,1520529050.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:50.978Z,1520529050.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:51.006Z,1520529051.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:51.382Z,1520529051.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:51.409Z,1520529051.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:51.776Z,1520529051.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:51.814Z,1520529051.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:52.175Z,1520529052.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:52.210Z,1520529052.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:52.600Z,1520529052.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:52.616Z,1520529052.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:52.993Z,1520529052.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:53.015Z,1520529053.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:53.401Z,1520529053.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:53.426Z,1520529053.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:53.775Z,1520529053.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:53.807Z,1520529053.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:54.178Z,1520529054.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:54.207Z,1520529054.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:54.579Z,1520529054.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:54.612Z,1520529054.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:54.979Z,1520529054.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:55.018Z,1520529055.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:55.403Z,1520529055.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:55.418Z,1520529055.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:55.799Z,1520529055.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:55.814Z,1520529055.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:56.186Z,1520529056.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:56.212Z,1520529056.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:56.579Z,1520529056.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:56.615Z,1520529056.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:56.976Z,1520529056.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:57.012Z,1520529057.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:57.371Z,1520529057.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:57.399Z,1520529057.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:57.783Z,1520529057.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:57.815Z,1520529057.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:58.176Z,1520529058.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:58.215Z,1520529058.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:58.587Z,1520529058.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:58.615Z,1520529058.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:58.991Z,1520529058.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:59.027Z,1520529059.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:59.390Z,1520529059.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:59.419Z,1520529059.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:10:59.779Z,1520529059.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:10:59.818Z,1520529059.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:00.176Z,1520529060.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:00.217Z,1520529060.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:00.582Z,1520529060.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:00.623Z,1520529060.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:00.973Z,1520529060.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:00.988Z,1520529060.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:01.390Z,1520529061.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:01.420Z,1520529061.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:01.807Z,1520529061.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:01.822Z,1520529061.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:02.186Z,1520529062.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:02.218Z,1520529062.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:02.585Z,1520529062.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:02.621Z,1520529062.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:02.983Z,1520529062.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:03.018Z,1520529063.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:03.371Z,1520529063.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:03.399Z,1520529063.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:03.781Z,1520529063.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:03.822Z,1520529063.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:04.185Z,1520529064.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:04.221Z,1520529064.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:04.581Z,1520529064.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:04.618Z,1520529064.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:04.999Z,1520529064.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:05.043Z,1520529065.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:05.391Z,1520529065.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:05.421Z,1520529065.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:08.487Z,1520529068.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:08.519Z,1520529068.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:08.598Z,1520529068.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:08.627Z,1520529068.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:09.013Z,1520529069.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:09.033Z,1520529069.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:09.399Z,1520529069.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:09.430Z,1520529069.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:09.810Z,1520529069.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:09.826Z,1520529069.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:10.194Z,1520529070.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:10.226Z,1520529070.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:10.590Z,1520529070.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:10.625Z,1520529070.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:10.992Z,1520529070.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:11.030Z,1520529071.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:11.412Z,1520529071.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:11.428Z,1520529071.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:11.801Z,1520529071.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:11.831Z,1520529071.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:12.215Z,1520529072.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:12.231Z,1520529072.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:12.589Z,1520529072.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:12.624Z,1520529072.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:12.981Z,1520529072.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:13.014Z,1520529073.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:13.393Z,1520529073.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:13.425Z,1520529073.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:13.792Z,1520529073.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:13.807Z,1520529073.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:14.185Z,1520529074.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:14.234Z,1520529074.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:14.609Z,1520529074.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:14.650Z,1520529074.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:14.996Z,1520529074.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:15.011Z,1520529075.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:15.401Z,1520529075.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:15.437Z,1520529075.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:15.799Z,1520529075.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:15.814Z,1520529075.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:16.195Z,1520529076.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:16.214Z,1520529076.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:16.595Z,1520529076.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:16.610Z,1520529076.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:16.992Z,1520529076.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:17.007Z,1520529077.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:17.408Z,1520529077.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:17.441Z,1520529077.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:17.796Z,1520529077.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:17.811Z,1520529077.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:18.214Z,1520529078.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:18.237Z,1520529078.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:18.594Z,1520529078.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:18.609Z,1520529078.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:18.984Z,1520529078.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:19.019Z,1520529079.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:19.399Z,1520529079.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:19.418Z,1520529079.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:19.792Z,1520529079.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:19.807Z,1520529079.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:20.191Z,1520529080.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:20.206Z,1520529080.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:20.606Z,1520529080.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:20.621Z,1520529080.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:21.005Z,1520529081.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:21.020Z,1520529081.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:21.402Z,1520529081.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:21.422Z,1520529081.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:21.795Z,1520529081.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:21.810Z,1520529081.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:22.199Z,1520529082.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:22.214Z,1520529082.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:22.599Z,1520529082.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:22.618Z,1520529082.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:22.999Z,1520529082.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:23.014Z,1520529083.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:23.402Z,1520529083.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:23.417Z,1520529083.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:23.803Z,1520529083.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:23.822Z,1520529083.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:24.206Z,1520529084.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:24.226Z,1520529084.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:24.600Z,1520529084.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:24.615Z,1520529084.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:24.989Z,1520529084.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:25.008Z,1520529085.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:25.387Z,1520529085.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:25.421Z,1520529085.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:25.799Z,1520529085.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:25.814Z,1520529085.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:26.179Z,1520529086.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:26.219Z,1520529086.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:26.605Z,1520529086.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:26.621Z,1520529086.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:27.005Z,1520529087.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:27.028Z,1520529087.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:27.399Z,1520529087.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:27.421Z,1520529087.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:27.785Z,1520529087.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:27.818Z,1520529087.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:28.186Z,1520529088.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:28.213Z,1520529088.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:28.588Z,1520529088.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:28.619Z,1520529088.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:28.998Z,1520529088.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:29.013Z,1520529089.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:29.401Z,1520529089.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:29.420Z,1520529089.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:29.809Z,1520529089.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:29.824Z,1520529089.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:30.205Z,1520529090.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:30.224Z,1520529090.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:30.585Z,1520529090.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:30.614Z,1520529090.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:30.984Z,1520529090.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:31.015Z,1520529091.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:31.385Z,1520529091.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:31.411Z,1520529091.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:31.779Z,1520529091.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:31.818Z,1520529091.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:32.182Z,1520529092.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:32.211Z,1520529092.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:32.601Z,1520529092.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:32.619Z,1520529092.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:33.005Z,1520529093.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:33.020Z,1520529093.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:33.398Z,1520529093.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:33.429Z,1520529093.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:33.789Z,1520529093.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:33.816Z,1520529093.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:34.185Z,1520529094.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:34.218Z,1520529094.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:34.587Z,1520529094.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:34.613Z,1520529094.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:34.983Z,1520529094.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:35.018Z,1520529095.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:35.408Z,1520529095.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:35.435Z,1520529095.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:35.810Z,1520529095.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:35.826Z,1520529095.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:36.207Z,1520529096.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:36.223Z,1520529096.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:36.583Z,1520529096.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:36.618Z,1520529096.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:36.977Z,1520529096.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:37.020Z,1520529097.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:37.386Z,1520529097.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:37.430Z,1520529097.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:37.787Z,1520529097.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:37.814Z,1520529097.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:38.178Z,1520529098.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:38.226Z,1520529098.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:38.607Z,1520529098.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:38.623Z,1520529098.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:39.007Z,1520529099.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:39.022Z,1520529099.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:39.411Z,1520529099.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:39.434Z,1520529099.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:39.788Z,1520529099.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:39.820Z,1520529099.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:40.186Z,1520529100.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:40.215Z,1520529100.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:40.586Z,1520529100.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:40.614Z,1520529100.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:40.985Z,1520529100.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:41.013Z,1520529101.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:41.405Z,1520529101.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:41.428Z,1520529101.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:41.811Z,1520529101.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:41.828Z,1520529101.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:42.205Z,1520529102.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:42.224Z,1520529102.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:42.586Z,1520529102.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:42.612Z,1520529102.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:42.976Z,1520529102.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:43.021Z,1520529103.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:43.384Z,1520529103.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:43.413Z,1520529103.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:43.782Z,1520529103.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:43.815Z,1520529103.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:44.185Z,1520529104.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:44.213Z,1520529104.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:44.609Z,1520529104.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:44.624Z,1520529104.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:45.008Z,1520529105.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:45.023Z,1520529105.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:45.394Z,1520529105.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:45.421Z,1520529105.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:45.786Z,1520529105.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:45.823Z,1520529105.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:46.184Z,1520529106.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:46.217Z,1520529106.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:46.591Z,1520529106.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:46.638Z,1520529106.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:46.991Z,1520529106.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:47.018Z,1520529107.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:47.409Z,1520529107.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:47.435Z,1520529107.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:47.821Z,1520529107.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:47.836Z,1520529107.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:48.208Z,1520529108.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:48.230Z,1520529108.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:48.585Z,1520529108.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:48.620Z,1520529108.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:48.980Z,1520529108.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:49.019Z,1520529109.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:49.384Z,1520529109.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:49.417Z,1520529109.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:49.781Z,1520529109.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:49.819Z,1520529109.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:50.179Z,1520529110.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:50.219Z,1520529110.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:50.605Z,1520529110.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:50.621Z,1520529110.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:50.995Z,1520529110.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:51.025Z,1520529111.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:51.391Z,1520529111.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:51.427Z,1520529111.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:51.785Z,1520529111.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:51.816Z,1520529111.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:52.191Z,1520529112.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:52.223Z,1520529112.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:52.588Z,1520529112.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:52.622Z,1520529112.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:52.985Z,1520529112.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:53.018Z,1520529113.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:53.400Z,1520529113.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:53.427Z,1520529113.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:53.793Z,1520529113.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:53.825Z,1520529113.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:54.204Z,1520529114.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:54.240Z,1520529114.240 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:54.240Z,1520529114.240 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 189
2018-03-08T17:11:54.240Z,1520529114.240 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T17:11:54.242Z,1520529114.242 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:54.242Z,1520529114.242 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 189
2018-03-08T17:11:54.242Z,1520529114.242 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T17:11:54.243Z,1520529114.243 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:54.244Z,1520529114.244 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 189
2018-03-08T17:11:54.244Z,1520529114.244 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T17:11:54.255Z,1520529114.255 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T17:11:54.256Z,1520529114.256 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T17:11:54.256Z,1520529114.256 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T17:11:54.597Z,1520529114.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:54.640Z,1520529114.640 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T17:11:54.640Z,1520529114.640 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 189
2018-03-08T17:11:54.641Z,1520529114.641 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T17:11:54.641Z,1520529114.641 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 189
2018-03-08T17:11:54.641Z,1520529114.641 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T17:11:54.641Z,1520529114.641 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 189
2018-03-08T17:11:54.987Z,1520529114.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:55.001Z,1520529115.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T17:11:55.001Z,1520529115.001 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:11:55.002Z,1520529115.002 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:11:55.002Z,1520529115.002 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T17:11:55.002Z,1520529115.002 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:11:55.003Z,1520529115.003 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:11:55.003Z,1520529115.003 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T17:11:55.003Z,1520529115.003 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:11:55.004Z,1520529115.004 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:11:55.394Z,1520529115.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:55.430Z,1520529115.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T17:11:55.431Z,1520529115.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:55.789Z,1520529115.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:55.808Z,1520529115.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T17:11:55.809Z,1520529115.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:55.854Z,1520529115.854 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T17:11:56.190Z,1520529116.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:56.214Z,1520529116.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T17:11:56.215Z,1520529116.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:56.609Z,1520529116.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:56.639Z,1520529116.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T17:11:56.640Z,1520529116.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:57.005Z,1520529117.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:57.019Z,1520529117.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T17:11:57.020Z,1520529117.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:57.398Z,1520529117.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:57.413Z,1520529117.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T17:11:57.414Z,1520529117.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:57.799Z,1520529117.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:57.814Z,1520529117.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T17:11:57.815Z,1520529117.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:58.201Z,1520529118.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:58.216Z,1520529118.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T17:11:58.217Z,1520529118.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:58.594Z,1520529118.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:58.609Z,1520529118.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T17:11:58.610Z,1520529118.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:58.991Z,1520529118.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:59.015Z,1520529119.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T17:11:59.015Z,1520529119.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:59.403Z,1520529119.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:59.418Z,1520529119.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T17:11:59.419Z,1520529119.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:11:59.798Z,1520529119.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:11:59.826Z,1520529119.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T17:11:59.827Z,1520529119.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:00.208Z,1520529120.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:00.231Z,1520529120.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T17:12:00.232Z,1520529120.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:00.583Z,1520529120.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:00.623Z,1520529120.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T17:12:00.624Z,1520529120.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:00.983Z,1520529120.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:01.012Z,1520529121.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T17:12:01.013Z,1520529121.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:01.385Z,1520529121.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:01.419Z,1520529121.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T17:12:01.420Z,1520529121.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:01.786Z,1520529121.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:01.813Z,1520529121.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T17:12:01.814Z,1520529121.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:02.180Z,1520529122.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:02.218Z,1520529122.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T17:12:02.219Z,1520529122.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:02.607Z,1520529122.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:02.622Z,1520529122.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T17:12:02.623Z,1520529122.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:03.005Z,1520529123.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:03.025Z,1520529123.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T17:12:03.026Z,1520529123.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:03.405Z,1520529123.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:03.420Z,1520529123.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T17:12:03.421Z,1520529123.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:03.782Z,1520529123.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:03.818Z,1520529123.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T17:12:03.819Z,1520529123.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:04.186Z,1520529124.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:04.234Z,1520529124.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T17:12:04.235Z,1520529124.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:04.591Z,1520529124.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:04.617Z,1520529124.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T17:12:04.618Z,1520529124.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:04.985Z,1520529124.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:05.011Z,1520529125.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T17:12:05.012Z,1520529125.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:05.407Z,1520529125.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:05.434Z,1520529125.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T17:12:05.435Z,1520529125.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:08.498Z,1520529128.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:08.530Z,1520529128.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2018-03-08T17:12:08.531Z,1520529128.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:08.649Z,1520529128.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:08.678Z,1520529128.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T17:12:08.679Z,1520529128.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:08.991Z,1520529128.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:09.023Z,1520529129.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T17:12:09.024Z,1520529129.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:09.390Z,1520529129.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:09.424Z,1520529129.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T17:12:09.425Z,1520529129.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:09.795Z,1520529129.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:09.826Z,1520529129.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T17:12:09.827Z,1520529129.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:10.185Z,1520529130.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:10.226Z,1520529130.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T17:12:10.227Z,1520529130.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:10.602Z,1520529130.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:10.646Z,1520529130.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T17:12:10.647Z,1520529130.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:10.000Z,1520529131.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:11.024Z,1520529131.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T17:12:11.025Z,1520529131.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:11.401Z,1520529131.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:11.426Z,1520529131.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T17:12:11.427Z,1520529131.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:11.787Z,1520529131.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:11.826Z,1520529131.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T17:12:11.827Z,1520529131.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:12.189Z,1520529132.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:12.222Z,1520529132.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T17:12:12.223Z,1520529132.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:12.586Z,1520529132.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:12.601Z,1520529132.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T17:12:12.602Z,1520529132.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:12.988Z,1520529132.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:13.003Z,1520529133.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T17:12:13.004Z,1520529133.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:13.403Z,1520529133.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:13.426Z,1520529133.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T17:12:13.427Z,1520529133.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:13.799Z,1520529133.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:13.828Z,1520529133.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T17:12:13.829Z,1520529133.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:14.198Z,1520529134.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:14.225Z,1520529134.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T17:12:14.225Z,1520529134.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:14.590Z,1520529134.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:14.606Z,1520529134.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:14.989Z,1520529134.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:15.009Z,1520529135.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:15.393Z,1520529135.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:15.408Z,1520529135.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:15.794Z,1520529135.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:15.812Z,1520529135.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:16.193Z,1520529136.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:16.209Z,1520529136.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:16.596Z,1520529136.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:16.613Z,1520529136.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:16.995Z,1520529136.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:17.011Z,1520529137.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:17.398Z,1520529137.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:17.415Z,1520529137.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:17.793Z,1520529137.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:17.811Z,1520529137.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:18.193Z,1520529138.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:18.212Z,1520529138.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:18.590Z,1520529138.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:18.617Z,1520529138.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:18.995Z,1520529138.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:19.010Z,1520529139.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:19.398Z,1520529139.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:19.414Z,1520529139.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:19.800Z,1520529139.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:19.815Z,1520529139.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:20.196Z,1520529140.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:20.212Z,1520529140.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:20.593Z,1520529140.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:20.608Z,1520529140.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:20.992Z,1520529140.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:21.007Z,1520529141.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:21.392Z,1520529141.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:21.411Z,1520529141.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:21.794Z,1520529141.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:21.810Z,1520529141.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:22.194Z,1520529142.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:22.220Z,1520529142.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:22.601Z,1520529142.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:22.617Z,1520529142.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:23.001Z,1520529143.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:23.016Z,1520529143.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:23.407Z,1520529143.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:23.422Z,1520529143.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:23.794Z,1520529143.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:23.810Z,1520529143.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:24.194Z,1520529144.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:24.211Z,1520529144.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:24.579Z,1520529144.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:24.612Z,1520529144.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:24.995Z,1520529144.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:25.015Z,1520529145.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:25.402Z,1520529145.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:25.418Z,1520529145.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:25.805Z,1520529145.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:25.820Z,1520529145.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:26.203Z,1520529146.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:26.223Z,1520529146.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:26.597Z,1520529146.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:26.612Z,1520529146.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:26.993Z,1520529146.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:27.007Z,1520529147.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:27.391Z,1520529147.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:27.406Z,1520529147.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:27.775Z,1520529147.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:27.818Z,1520529147.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:28.197Z,1520529148.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:28.223Z,1520529148.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:28.602Z,1520529148.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:28.623Z,1520529148.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:29.001Z,1520529149.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:29.017Z,1520529149.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:29.409Z,1520529149.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:29.447Z,1520529149.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:29.795Z,1520529149.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:29.814Z,1520529149.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:30.176Z,1520529150.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:30.208Z,1520529150.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:30.581Z,1520529150.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:30.609Z,1520529150.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:30.982Z,1520529150.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:31.014Z,1520529151.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:31.388Z,1520529151.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:31.415Z,1520529151.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:31.803Z,1520529151.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:31.818Z,1520529151.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:32.206Z,1520529152.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:32.221Z,1520529152.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:32.575Z,1520529152.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:32.614Z,1520529152.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:32.975Z,1520529152.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:33.014Z,1520529153.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:33.384Z,1520529153.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:33.418Z,1520529153.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:33.779Z,1520529153.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:33.806Z,1520529153.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:34.183Z,1520529154.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:34.214Z,1520529154.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:34.603Z,1520529154.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:34.638Z,1520529154.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:35.005Z,1520529155.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:35.020Z,1520529155.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:35.402Z,1520529155.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:35.422Z,1520529155.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:35.783Z,1520529155.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:35.819Z,1520529155.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:36.185Z,1520529156.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:36.230Z,1520529156.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:36.582Z,1520529156.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:36.610Z,1520529156.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:36.985Z,1520529156.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:37.018Z,1520529157.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:37.396Z,1520529157.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:37.424Z,1520529157.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:37.796Z,1520529157.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:37.827Z,1520529157.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:38.194Z,1520529158.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:38.221Z,1520529158.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:38.583Z,1520529158.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:38.615Z,1520529158.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:38.982Z,1520529158.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:39.018Z,1520529159.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:39.384Z,1520529159.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:39.422Z,1520529159.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:39.785Z,1520529159.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:39.821Z,1520529159.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:40.187Z,1520529160.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:40.202Z,1520529160.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:40.597Z,1520529160.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:40.623Z,1520529160.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:41.002Z,1520529161.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:41.027Z,1520529161.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:41.401Z,1520529161.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:41.425Z,1520529161.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:41.785Z,1520529161.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:41.822Z,1520529161.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:42.187Z,1520529162.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:42.230Z,1520529162.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:42.587Z,1520529162.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:42.625Z,1520529162.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:42.983Z,1520529162.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:42.998Z,1520529162.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:43.401Z,1520529163.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:43.425Z,1520529163.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:43.800Z,1520529163.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:43.829Z,1520529163.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:44.199Z,1520529164.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:44.234Z,1520529164.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:44.590Z,1520529164.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:44.606Z,1520529164.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:44.990Z,1520529164.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:45.005Z,1520529165.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:45.384Z,1520529165.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:45.434Z,1520529165.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:45.792Z,1520529165.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:45.831Z,1520529165.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:46.187Z,1520529166.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:46.202Z,1520529166.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:46.601Z,1520529166.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:46.631Z,1520529166.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:47.003Z,1520529167.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:47.031Z,1520529167.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:47.402Z,1520529167.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:47.432Z,1520529167.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:47.793Z,1520529167.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:47.808Z,1520529167.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:48.191Z,1520529168.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:48.207Z,1520529168.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:48.589Z,1520529168.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:48.608Z,1520529168.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:48.986Z,1520529168.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:49.010Z,1520529169.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:49.401Z,1520529169.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:49.433Z,1520529169.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:49.809Z,1520529169.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:49.837Z,1520529169.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:50.194Z,1520529170.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:50.213Z,1520529170.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:50.594Z,1520529170.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:50.609Z,1520529170.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:50.997Z,1520529170.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:51.012Z,1520529171.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:51.394Z,1520529171.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:51.409Z,1520529171.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:51.793Z,1520529171.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:51.811Z,1520529171.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:52.196Z,1520529172.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:52.211Z,1520529172.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:52.594Z,1520529172.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:52.623Z,1520529172.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:52.997Z,1520529172.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:53.013Z,1520529173.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:53.400Z,1520529173.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:53.415Z,1520529173.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:53.797Z,1520529173.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:53.812Z,1520529173.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:54.183Z,1520529174.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:54.207Z,1520529174.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:54.590Z,1520529174.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:54.605Z,1520529174.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:54.972Z,1520529174.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:55.006Z,1520529175.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:55.401Z,1520529175.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:55.416Z,1520529175.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:55.803Z,1520529175.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:55.835Z,1520529175.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:56.190Z,1520529176.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:56.206Z,1520529176.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:56.593Z,1520529176.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:56.612Z,1520529176.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:56.993Z,1520529176.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:57.009Z,1520529177.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:57.381Z,1520529177.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:57.419Z,1520529177.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:57.795Z,1520529177.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:57.810Z,1520529177.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:58.208Z,1520529178.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:58.223Z,1520529178.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:58.606Z,1520529178.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:58.622Z,1520529178.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:59.003Z,1520529179.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:59.018Z,1520529179.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:59.399Z,1520529179.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:59.431Z,1520529179.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:12:59.783Z,1520529179.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:12:59.819Z,1520529179.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:00.185Z,1520529180.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:00.230Z,1520529180.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:00.580Z,1520529180.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:00.618Z,1520529180.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:00.979Z,1520529180.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:01.011Z,1520529181.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:01.396Z,1520529181.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:01.424Z,1520529181.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:01.808Z,1520529181.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:01.861Z,1520529181.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:02.208Z,1520529182.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:02.232Z,1520529182.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:02.586Z,1520529182.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:02.620Z,1520529182.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:02.979Z,1520529182.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:03.022Z,1520529183.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:03.382Z,1520529183.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:03.434Z,1520529183.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:03.786Z,1520529183.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:03.811Z,1520529183.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:04.191Z,1520529184.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:04.210Z,1520529184.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:04.596Z,1520529184.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:04.613Z,1520529184.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:04.000Z,1520529185.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:05.015Z,1520529185.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:05.030Z,1520529185.030 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T17:08:04.9Z
2018-03-08T17:13:05.031Z,1520529185.031 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T17:13:05.031Z,1520529185.031 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T17:13:05.401Z,1520529185.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:05.440Z,1520529185.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:05.884Z,1520529185.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:05.915Z,1520529185.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:08.905Z,1520529188.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:08.941Z,1520529188.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:09.013Z,1520529189.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:09.036Z,1520529189.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:09.399Z,1520529189.399 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20180308T074127/Courier0220.lzma
2018-03-08T17:13:09.450Z,1520529189.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:09.465Z,1520529189.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:09.838Z,1520529189.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:09.854Z,1520529189.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:10.191Z,1520529190.191 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0220.lzma.bak
2018-03-08T17:13:10.192Z,1520529190.192 [DataOverHttps](INFO): SBD MOMSN=7987568
2018-03-08T17:13:10.240Z,1520529190.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:10.271Z,1520529190.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:10.796Z,1520529190.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:10.818Z,1520529190.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:11.019Z,1520529191.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:11.051Z,1520529191.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:14.116Z,1520529194.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:14.151Z,1520529194.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:14.230Z,1520529194.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:14.257Z,1520529194.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:14.625Z,1520529194.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:14.657Z,1520529194.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:15.017Z,1520529195.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:15.032Z,1520529195.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:15.416Z,1520529195.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:15.431Z,1520529195.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:15.814Z,1520529195.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:15.841Z,1520529195.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:16.217Z,1520529196.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:16.232Z,1520529196.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:19.296Z,1520529199.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:19.319Z,1520529199.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:19.422Z,1520529199.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:19.437Z,1520529199.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:19.757Z,1520529199.757 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0221.lzma
2018-03-08T17:13:19.794Z,1520529199.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:19.826Z,1520529199.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:20.186Z,1520529200.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:20.209Z,1520529200.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:20.547Z,1520529200.547 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0221.lzma.bak
2018-03-08T17:13:20.547Z,1520529200.547 [DataOverHttps](INFO): SBD MOMSN=7987570
2018-03-08T17:13:20.604Z,1520529200.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:20.627Z,1520529200.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:25.746Z,1520529205.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:25.771Z,1520529205.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:25.774Z,1520529205.774 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T17:13:25.774Z,1520529205.774 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T17:13:25.774Z,1520529205.774 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T17:13:25.873Z,1520529205.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:25.888Z,1520529205.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:26.246Z,1520529206.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:26.269Z,1520529206.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:29.338Z,1520529209.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:29.376Z,1520529209.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:29.460Z,1520529209.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:29.475Z,1520529209.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:29.832Z,1520529209.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:29.871Z,1520529209.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:30.229Z,1520529210.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:30.244Z,1520529210.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:30.632Z,1520529210.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:30.648Z,1520529210.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:31.030Z,1520529211.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:31.045Z,1520529211.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:31.441Z,1520529211.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:31.469Z,1520529211.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:31.846Z,1520529211.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:31.881Z,1520529211.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:32.237Z,1520529212.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:32.253Z,1520529212.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:32.636Z,1520529212.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:32.651Z,1520529212.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:33.035Z,1520529213.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:33.050Z,1520529213.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:33.436Z,1520529213.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:33.451Z,1520529213.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:33.835Z,1520529213.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:33.851Z,1520529213.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:34.237Z,1520529214.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:34.253Z,1520529214.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:34.638Z,1520529214.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:34.658Z,1520529214.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:35.041Z,1520529215.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:35.057Z,1520529215.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:35.436Z,1520529215.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:35.451Z,1520529215.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:35.835Z,1520529215.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:35.850Z,1520529215.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:36.238Z,1520529216.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:36.253Z,1520529216.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:36.642Z,1520529216.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:36.657Z,1520529216.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:37.037Z,1520529217.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:37.058Z,1520529217.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:37.437Z,1520529217.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:37.453Z,1520529217.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:37.835Z,1520529217.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:37.851Z,1520529217.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:38.249Z,1520529218.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:38.281Z,1520529218.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:38.641Z,1520529218.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:38.658Z,1520529218.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:39.038Z,1520529219.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:39.054Z,1520529219.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:39.450Z,1520529219.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:39.497Z,1520529219.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:39.832Z,1520529219.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:39.848Z,1520529219.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:40.240Z,1520529220.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:40.262Z,1520529220.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:40.648Z,1520529220.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:40.664Z,1520529220.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:41.048Z,1520529221.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:41.064Z,1520529221.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:41.427Z,1520529221.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:41.472Z,1520529221.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:41.854Z,1520529221.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:41.874Z,1520529221.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:42.241Z,1520529222.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:42.265Z,1520529222.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:42.642Z,1520529222.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:42.665Z,1520529222.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:43.042Z,1520529223.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:43.074Z,1520529223.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:43.428Z,1520529223.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:43.466Z,1520529223.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:43.828Z,1520529223.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:43.844Z,1520529223.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:44.237Z,1520529224.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:44.269Z,1520529224.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:44.645Z,1520529224.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:44.670Z,1520529224.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:45.045Z,1520529225.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:45.070Z,1520529225.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:45.428Z,1520529225.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:45.444Z,1520529225.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:45.823Z,1520529225.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:45.838Z,1520529225.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:46.242Z,1520529226.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:46.274Z,1520529226.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:46.649Z,1520529226.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:46.675Z,1520529226.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:47.045Z,1520529227.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:47.069Z,1520529227.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:47.432Z,1520529227.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:47.447Z,1520529227.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:47.832Z,1520529227.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:47.847Z,1520529227.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:48.242Z,1520529228.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:48.269Z,1520529228.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:48.645Z,1520529228.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:48.676Z,1520529228.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:49.038Z,1520529229.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:49.053Z,1520529229.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:49.432Z,1520529229.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:49.447Z,1520529229.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:49.830Z,1520529229.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:49.849Z,1520529229.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:50.237Z,1520529230.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:50.253Z,1520529230.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:50.640Z,1520529230.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:50.655Z,1520529230.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:51.038Z,1520529231.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:51.058Z,1520529231.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:51.435Z,1520529231.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:51.458Z,1520529231.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:51.835Z,1520529231.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:51.849Z,1520529231.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:52.237Z,1520529232.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:52.253Z,1520529232.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:52.649Z,1520529232.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:52.664Z,1520529232.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:53.041Z,1520529233.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:53.056Z,1520529233.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:53.432Z,1520529233.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:53.447Z,1520529233.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:53.835Z,1520529233.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:53.850Z,1520529233.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:54.241Z,1520529234.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:54.256Z,1520529234.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:54.640Z,1520529234.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:54.655Z,1520529234.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:55.040Z,1520529235.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:55.055Z,1520529235.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:55.436Z,1520529235.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:55.451Z,1520529235.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:55.859Z,1520529235.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:55.897Z,1520529235.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:56.240Z,1520529236.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:56.255Z,1520529236.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:56.641Z,1520529236.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:56.705Z,1520529236.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:57.041Z,1520529237.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:57.056Z,1520529237.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:57.436Z,1520529237.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:57.451Z,1520529237.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:57.831Z,1520529237.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:57.847Z,1520529237.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:58.240Z,1520529238.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:58.256Z,1520529238.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:58.641Z,1520529238.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:58.657Z,1520529238.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:59.041Z,1520529239.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:59.056Z,1520529239.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:59.436Z,1520529239.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:59.451Z,1520529239.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:13:59.835Z,1520529239.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:13:59.850Z,1520529239.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:00.245Z,1520529240.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:00.260Z,1520529240.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:00.645Z,1520529240.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:00.661Z,1520529240.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:01.041Z,1520529241.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:01.056Z,1520529241.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:01.432Z,1520529241.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:01.447Z,1520529241.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:01.835Z,1520529241.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:01.854Z,1520529241.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:02.244Z,1520529242.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:02.260Z,1520529242.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:02.645Z,1520529242.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:02.660Z,1520529242.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:03.045Z,1520529243.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:03.060Z,1520529243.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:03.437Z,1520529243.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:03.452Z,1520529243.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:03.831Z,1520529243.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:03.846Z,1520529243.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:04.244Z,1520529244.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:04.260Z,1520529244.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:04.644Z,1520529244.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:04.660Z,1520529244.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:05.045Z,1520529245.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:05.060Z,1520529245.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:05.436Z,1520529245.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:05.452Z,1520529245.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:05.829Z,1520529245.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:05.849Z,1520529245.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:06.244Z,1520529246.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:06.259Z,1520529246.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:06.644Z,1520529246.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:06.659Z,1520529246.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:07.045Z,1520529247.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:07.061Z,1520529247.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:07.437Z,1520529247.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:07.452Z,1520529247.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:07.835Z,1520529247.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:07.850Z,1520529247.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:08.240Z,1520529248.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:08.256Z,1520529248.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:08.645Z,1520529248.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:08.659Z,1520529248.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:09.045Z,1520529249.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:09.060Z,1520529249.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:09.432Z,1520529249.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:09.449Z,1520529249.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:09.831Z,1520529249.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:09.846Z,1520529249.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:10.245Z,1520529250.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:10.261Z,1520529250.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:10.644Z,1520529250.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:10.659Z,1520529250.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:11.045Z,1520529251.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:11.060Z,1520529251.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:11.436Z,1520529251.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:11.452Z,1520529251.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:11.839Z,1520529251.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:11.859Z,1520529251.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:12.245Z,1520529252.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:12.260Z,1520529252.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:12.644Z,1520529252.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:12.659Z,1520529252.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:13.044Z,1520529253.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:13.059Z,1520529253.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:13.438Z,1520529253.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:13.452Z,1520529253.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:13.835Z,1520529253.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:13.858Z,1520529253.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:14.242Z,1520529254.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:14.257Z,1520529254.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:14.646Z,1520529254.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:14.661Z,1520529254.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:15.042Z,1520529255.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:15.057Z,1520529255.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:15.433Z,1520529255.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:15.448Z,1520529255.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:15.831Z,1520529255.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:15.856Z,1520529255.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:16.245Z,1520529256.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:16.266Z,1520529256.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:16.644Z,1520529256.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:16.659Z,1520529256.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:17.048Z,1520529257.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:17.063Z,1520529257.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:17.435Z,1520529257.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:17.450Z,1520529257.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:17.829Z,1520529257.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:17.850Z,1520529257.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:18.245Z,1520529258.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:18.261Z,1520529258.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:18.645Z,1520529258.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:18.661Z,1520529258.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:19.046Z,1520529259.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:19.063Z,1520529259.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:19.429Z,1520529259.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:19.455Z,1520529259.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:19.837Z,1520529259.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:19.852Z,1520529259.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:20.241Z,1520529260.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:20.257Z,1520529260.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:20.645Z,1520529260.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:20.660Z,1520529260.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:21.038Z,1520529261.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:21.066Z,1520529261.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:21.428Z,1520529261.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:21.455Z,1520529261.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:21.823Z,1520529261.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:21.851Z,1520529261.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:22.243Z,1520529262.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:22.258Z,1520529262.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:22.642Z,1520529262.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:22.664Z,1520529262.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:23.046Z,1520529263.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:23.061Z,1520529263.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:23.423Z,1520529263.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:23.450Z,1520529263.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:23.823Z,1520529263.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:23.851Z,1520529263.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:24.240Z,1520529264.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:24.270Z,1520529264.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:24.649Z,1520529264.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:24.665Z,1520529264.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:25.041Z,1520529265.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:25.057Z,1520529265.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:25.423Z,1520529265.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:25.450Z,1520529265.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:25.827Z,1520529265.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:25.858Z,1520529265.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:26.249Z,1520529266.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:26.264Z,1520529266.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:29.350Z,1520529269.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:29.365Z,1520529269.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:29.473Z,1520529269.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:29.505Z,1520529269.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:29.819Z,1520529269.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:29.853Z,1520529269.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:30.219Z,1520529270.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:30.249Z,1520529270.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:30.619Z,1520529270.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:30.650Z,1520529270.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:31.018Z,1520529271.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:31.047Z,1520529271.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:31.428Z,1520529271.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:31.448Z,1520529271.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:31.839Z,1520529271.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:31.854Z,1520529271.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:32.235Z,1520529272.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:32.251Z,1520529272.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:32.619Z,1520529272.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:32.651Z,1520529272.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:33.014Z,1520529273.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:33.037Z,1520529273.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:33.417Z,1520529273.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:33.449Z,1520529273.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:33.811Z,1520529273.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:33.826Z,1520529273.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:34.229Z,1520529274.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:34.254Z,1520529274.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:34.633Z,1520529274.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:34.662Z,1520529274.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:35.029Z,1520529275.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:35.058Z,1520529275.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:35.412Z,1520529275.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:35.435Z,1520529275.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:35.822Z,1520529275.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:35.837Z,1520529275.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:36.233Z,1520529276.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:36.248Z,1520529276.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:36.625Z,1520529276.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:36.646Z,1520529276.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:37.026Z,1520529277.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:37.041Z,1520529277.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:37.423Z,1520529277.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:37.438Z,1520529277.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:37.819Z,1520529277.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:37.834Z,1520529277.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:38.226Z,1520529278.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:38.242Z,1520529278.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:38.629Z,1520529278.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:38.644Z,1520529278.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:39.022Z,1520529279.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:39.042Z,1520529279.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:39.423Z,1520529279.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:39.439Z,1520529279.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:39.819Z,1520529279.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:39.834Z,1520529279.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:40.228Z,1520529280.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:40.250Z,1520529280.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:40.629Z,1520529280.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:40.645Z,1520529280.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:41.029Z,1520529281.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:41.044Z,1520529281.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:41.405Z,1520529281.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:41.420Z,1520529281.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:41.813Z,1520529281.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:41.846Z,1520529281.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:42.225Z,1520529282.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:42.240Z,1520529282.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:42.598Z,1520529282.598 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T17:14:42.598Z,1520529282.598 [NAL9602] Data Fault, FailCount= 3
2018-03-08T17:14:42.598Z,1520529282.598 [NAL9602](ERROR): Data Fault
2018-03-08T17:14:42.634Z,1520529282.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:42.650Z,1520529282.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:42.675Z,1520529282.675 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T17:14:42.998Z,1520529282.998 [NAL9602](INFO): Powering down
2018-03-08T17:14:43.030Z,1520529283.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:43.046Z,1520529283.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:43.422Z,1520529283.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:43.437Z,1520529283.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:43.825Z,1520529283.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:43.841Z,1520529283.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:43.853Z,1520529283.853 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T17:14:43.854Z,1520529283.854 [NAL9602] No Fault, FailCount= 3
2018-03-08T17:14:44.226Z,1520529284.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:44.246Z,1520529284.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:44.621Z,1520529284.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:44.636Z,1520529284.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:45.004Z,1520529285.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:45.028Z,1520529285.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:45.424Z,1520529285.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:45.446Z,1520529285.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:45.811Z,1520529285.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:45.837Z,1520529285.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:46.222Z,1520529286.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:46.238Z,1520529286.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:46.610Z,1520529286.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:46.643Z,1520529286.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:47.024Z,1520529287.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:47.039Z,1520529287.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:47.409Z,1520529287.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:47.436Z,1520529287.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:47.811Z,1520529287.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:47.846Z,1520529287.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:48.222Z,1520529288.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:48.237Z,1520529288.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:48.612Z,1520529288.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:48.647Z,1520529288.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:49.014Z,1520529289.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:49.046Z,1520529289.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:49.410Z,1520529289.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:49.442Z,1520529289.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:49.814Z,1520529289.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:49.843Z,1520529289.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:50.214Z,1520529290.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:50.241Z,1520529290.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:50.611Z,1520529290.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:50.638Z,1520529290.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:51.008Z,1520529291.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:51.036Z,1520529291.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:51.415Z,1520529291.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:51.441Z,1520529291.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:51.810Z,1520529291.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:51.843Z,1520529291.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:52.215Z,1520529292.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:52.243Z,1520529292.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:52.611Z,1520529292.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:52.639Z,1520529292.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:53.014Z,1520529293.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:53.046Z,1520529293.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:53.411Z,1520529293.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:53.439Z,1520529293.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:53.814Z,1520529293.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:53.849Z,1520529293.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:54.218Z,1520529294.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:54.256Z,1520529294.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:54.611Z,1520529294.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:54.627Z,1520529294.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:55.018Z,1520529295.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:55.033Z,1520529295.033 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:55.033Z,1520529295.033 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 190
2018-03-08T17:14:55.033Z,1520529295.033 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T17:14:55.035Z,1520529295.035 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:55.035Z,1520529295.035 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 190
2018-03-08T17:14:55.035Z,1520529295.035 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T17:14:55.057Z,1520529295.057 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:55.057Z,1520529295.057 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 190
2018-03-08T17:14:55.057Z,1520529295.057 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T17:14:55.081Z,1520529295.081 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T17:14:55.081Z,1520529295.081 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T17:14:55.082Z,1520529295.082 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T17:14:55.417Z,1520529295.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:55.472Z,1520529295.472 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T17:14:55.472Z,1520529295.472 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 190
2018-03-08T17:14:55.473Z,1520529295.473 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T17:14:55.473Z,1520529295.473 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 190
2018-03-08T17:14:55.473Z,1520529295.473 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T17:14:55.473Z,1520529295.473 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 190
2018-03-08T17:14:55.822Z,1520529295.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:55.837Z,1520529295.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T17:14:55.837Z,1520529295.837 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:14:55.837Z,1520529295.837 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:14:55.838Z,1520529295.838 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T17:14:55.838Z,1520529295.838 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:14:55.838Z,1520529295.838 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:14:55.839Z,1520529295.839 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T17:14:55.839Z,1520529295.839 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:14:55.840Z,1520529295.840 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:14:56.218Z,1520529296.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:56.238Z,1520529296.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T17:14:56.239Z,1520529296.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:56.621Z,1520529296.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:56.636Z,1520529296.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T17:14:56.637Z,1520529296.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:57.017Z,1520529297.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:57.032Z,1520529297.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T17:14:57.033Z,1520529297.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:57.420Z,1520529297.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:57.435Z,1520529297.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T17:14:57.435Z,1520529297.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:57.819Z,1520529297.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:57.833Z,1520529297.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T17:14:57.834Z,1520529297.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:58.222Z,1520529298.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:58.237Z,1520529298.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T17:14:58.238Z,1520529298.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:58.620Z,1520529298.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:58.634Z,1520529298.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T17:14:58.635Z,1520529298.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:59.019Z,1520529299.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:59.034Z,1520529299.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T17:14:59.035Z,1520529299.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:59.412Z,1520529299.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:59.427Z,1520529299.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T17:14:59.428Z,1520529299.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:14:59.826Z,1520529299.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:14:59.853Z,1520529299.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T17:14:59.854Z,1520529299.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:00.222Z,1520529300.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:00.237Z,1520529300.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T17:15:00.238Z,1520529300.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:00.622Z,1520529300.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:00.637Z,1520529300.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T17:15:00.638Z,1520529300.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:01.018Z,1520529301.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:01.033Z,1520529301.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T17:15:01.033Z,1520529301.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:01.417Z,1520529301.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:01.432Z,1520529301.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T17:15:01.433Z,1520529301.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:01.822Z,1520529301.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:01.838Z,1520529301.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T17:15:01.838Z,1520529301.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:02.223Z,1520529302.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:02.238Z,1520529302.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T17:15:02.239Z,1520529302.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:02.618Z,1520529302.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:02.632Z,1520529302.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T17:15:02.633Z,1520529302.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:03.020Z,1520529303.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:03.035Z,1520529303.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T17:15:03.036Z,1520529303.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:03.418Z,1520529303.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:03.432Z,1520529303.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T17:15:03.433Z,1520529303.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:03.818Z,1520529303.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:03.832Z,1520529303.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T17:15:03.833Z,1520529303.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:04.221Z,1520529304.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:04.237Z,1520529304.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T17:15:04.238Z,1520529304.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:04.623Z,1520529304.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:04.637Z,1520529304.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T17:15:04.638Z,1520529304.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:05.022Z,1520529305.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:05.037Z,1520529305.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T17:15:05.038Z,1520529305.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:05.415Z,1520529305.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:05.431Z,1520529305.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T17:15:05.431Z,1520529305.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:05.821Z,1520529305.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:05.835Z,1520529305.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T17:15:05.836Z,1520529305.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:06.222Z,1520529306.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:06.237Z,1520529306.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T17:15:06.238Z,1520529306.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:06.621Z,1520529306.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:06.636Z,1520529306.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T17:15:06.637Z,1520529306.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:07.022Z,1520529307.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:07.037Z,1520529307.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T17:15:07.038Z,1520529307.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:07.422Z,1520529307.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:07.436Z,1520529307.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T17:15:07.437Z,1520529307.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:07.823Z,1520529307.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:07.838Z,1520529307.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T17:15:07.839Z,1520529307.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:08.221Z,1520529308.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:08.236Z,1520529308.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T17:15:08.237Z,1520529308.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:08.622Z,1520529308.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:08.636Z,1520529308.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T17:15:08.637Z,1520529308.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:09.015Z,1520529309.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:09.031Z,1520529309.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T17:15:09.032Z,1520529309.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:09.417Z,1520529309.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:09.431Z,1520529309.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T17:15:09.432Z,1520529309.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:09.822Z,1520529309.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:09.837Z,1520529309.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T17:15:09.838Z,1520529309.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:10.221Z,1520529310.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:10.236Z,1520529310.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T17:15:10.237Z,1520529310.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:10.618Z,1520529310.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:10.632Z,1520529310.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T17:15:10.633Z,1520529310.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:11.023Z,1520529311.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:11.038Z,1520529311.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T17:15:11.039Z,1520529311.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:11.417Z,1520529311.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:11.432Z,1520529311.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T17:15:11.433Z,1520529311.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:11.823Z,1520529311.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:11.838Z,1520529311.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T17:15:11.838Z,1520529311.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:12.222Z,1520529312.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:12.236Z,1520529312.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T17:15:12.237Z,1520529312.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:12.623Z,1520529312.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:12.638Z,1520529312.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T17:15:12.639Z,1520529312.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:13.022Z,1520529313.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:13.036Z,1520529313.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T17:15:13.037Z,1520529313.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:13.398Z,1520529313.398 [NAL9602](INFO): Powering up NAL9602
2018-03-08T17:15:13.427Z,1520529313.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:13.442Z,1520529313.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T17:15:13.443Z,1520529313.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:13.815Z,1520529313.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:13.831Z,1520529313.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T17:15:13.833Z,1520529313.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:14.223Z,1520529314.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:14.237Z,1520529314.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T17:15:14.238Z,1520529314.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:14.623Z,1520529314.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:14.638Z,1520529314.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T17:15:14.639Z,1520529314.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:15.016Z,1520529315.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:15.031Z,1520529315.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T17:15:15.032Z,1520529315.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:15.418Z,1520529315.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:15.433Z,1520529315.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:15.822Z,1520529315.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:15.843Z,1520529315.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:16.220Z,1520529316.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:16.235Z,1520529316.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:16.622Z,1520529316.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:16.637Z,1520529316.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:17.022Z,1520529317.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:17.043Z,1520529317.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:17.415Z,1520529317.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:17.430Z,1520529317.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:17.816Z,1520529317.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:17.839Z,1520529317.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:18.218Z,1520529318.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:18.233Z,1520529318.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:18.619Z,1520529318.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:18.634Z,1520529318.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:19.017Z,1520529319.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:19.038Z,1520529319.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:19.421Z,1520529319.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:19.436Z,1520529319.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:19.818Z,1520529319.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:19.834Z,1520529319.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:20.222Z,1520529320.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:20.237Z,1520529320.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:20.621Z,1520529320.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:20.637Z,1520529320.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:21.022Z,1520529321.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:21.037Z,1520529321.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:21.421Z,1520529321.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:21.436Z,1520529321.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:21.822Z,1520529321.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:21.842Z,1520529321.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:22.222Z,1520529322.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:22.238Z,1520529322.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:22.618Z,1520529322.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:22.633Z,1520529322.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:23.023Z,1520529323.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:23.038Z,1520529323.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:23.419Z,1520529323.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:23.434Z,1520529323.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:23.823Z,1520529323.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:23.838Z,1520529323.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:24.225Z,1520529324.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:24.241Z,1520529324.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:24.594Z,1520529324.594 [NAL9602](INFO): NAL9602 initialized
2018-03-08T17:15:24.622Z,1520529324.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:24.641Z,1520529324.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:25.019Z,1520529325.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:25.034Z,1520529325.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:25.426Z,1520529325.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:25.442Z,1520529325.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:25.829Z,1520529325.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:25.845Z,1520529325.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:26.226Z,1520529326.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:26.247Z,1520529326.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:26.624Z,1520529326.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:26.639Z,1520529326.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:29.729Z,1520529329.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:29.746Z,1520529329.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:29.841Z,1520529329.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:29.864Z,1520529329.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:30.241Z,1520529330.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:30.277Z,1520529330.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:30.633Z,1520529330.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:30.649Z,1520529330.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:31.037Z,1520529331.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:31.053Z,1520529331.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:31.433Z,1520529331.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:31.454Z,1520529331.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:31.831Z,1520529331.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:31.846Z,1520529331.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:32.234Z,1520529332.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:32.251Z,1520529332.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:32.634Z,1520529332.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:32.649Z,1520529332.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:33.034Z,1520529333.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:33.049Z,1520529333.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:33.432Z,1520529333.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:33.448Z,1520529333.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:33.828Z,1520529333.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:33.844Z,1520529333.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:34.234Z,1520529334.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:34.250Z,1520529334.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:34.633Z,1520529334.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:34.649Z,1520529334.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:35.034Z,1520529335.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:35.050Z,1520529335.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:35.427Z,1520529335.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:35.446Z,1520529335.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:35.831Z,1520529335.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:35.847Z,1520529335.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:36.233Z,1520529336.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:36.248Z,1520529336.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:36.637Z,1520529336.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:36.653Z,1520529336.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:37.038Z,1520529337.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:37.054Z,1520529337.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:37.429Z,1520529337.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:37.444Z,1520529337.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:37.832Z,1520529337.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:37.854Z,1520529337.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:38.237Z,1520529338.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:38.258Z,1520529338.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:38.641Z,1520529338.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:38.656Z,1520529338.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:39.040Z,1520529339.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:39.056Z,1520529339.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:39.427Z,1520529339.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:39.447Z,1520529339.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:39.833Z,1520529339.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:39.848Z,1520529339.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:40.240Z,1520529340.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:40.257Z,1520529340.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:40.641Z,1520529340.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:40.656Z,1520529340.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:41.041Z,1520529341.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:41.063Z,1520529341.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:41.429Z,1520529341.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:41.444Z,1520529341.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:41.835Z,1520529341.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:41.851Z,1520529341.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:42.238Z,1520529342.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:42.253Z,1520529342.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:42.637Z,1520529342.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:42.658Z,1520529342.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:43.040Z,1520529343.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:43.055Z,1520529343.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:43.432Z,1520529343.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:43.447Z,1520529343.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:43.831Z,1520529343.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:43.846Z,1520529343.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:44.240Z,1520529344.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:44.255Z,1520529344.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:44.641Z,1520529344.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:44.656Z,1520529344.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:45.040Z,1520529345.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:45.062Z,1520529345.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:45.432Z,1520529345.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:45.448Z,1520529345.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:45.831Z,1520529345.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:45.847Z,1520529345.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:46.240Z,1520529346.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:46.256Z,1520529346.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:46.641Z,1520529346.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:46.656Z,1520529346.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:47.041Z,1520529347.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:47.056Z,1520529347.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:47.432Z,1520529347.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:47.448Z,1520529347.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:47.834Z,1520529347.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:47.854Z,1520529347.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:48.241Z,1520529348.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:48.256Z,1520529348.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:48.640Z,1520529348.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:48.663Z,1520529348.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:49.040Z,1520529349.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:49.062Z,1520529349.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:49.433Z,1520529349.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:49.448Z,1520529349.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:49.831Z,1520529349.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:49.847Z,1520529349.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:50.237Z,1520529350.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:50.258Z,1520529350.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:50.640Z,1520529350.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:50.655Z,1520529350.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:51.040Z,1520529351.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:51.056Z,1520529351.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:51.432Z,1520529351.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:51.448Z,1520529351.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:51.827Z,1520529351.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:51.846Z,1520529351.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:52.241Z,1520529352.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:52.262Z,1520529352.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:52.640Z,1520529352.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:52.655Z,1520529352.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:53.041Z,1520529353.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:53.055Z,1520529353.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:53.433Z,1520529353.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:53.449Z,1520529353.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:53.827Z,1520529353.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:53.847Z,1520529353.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:54.241Z,1520529354.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:54.256Z,1520529354.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:54.640Z,1520529354.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:54.655Z,1520529354.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:55.040Z,1520529355.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:55.062Z,1520529355.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:55.432Z,1520529355.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:55.447Z,1520529355.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:55.831Z,1520529355.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:55.847Z,1520529355.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:56.241Z,1520529356.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:56.257Z,1520529356.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:56.640Z,1520529356.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:56.655Z,1520529356.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:57.042Z,1520529357.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:57.057Z,1520529357.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:57.431Z,1520529357.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:57.447Z,1520529357.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:57.827Z,1520529357.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:57.846Z,1520529357.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:58.241Z,1520529358.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:58.257Z,1520529358.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:58.640Z,1520529358.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:58.655Z,1520529358.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:59.041Z,1520529359.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:59.056Z,1520529359.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:59.429Z,1520529359.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:59.445Z,1520529359.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:15:59.826Z,1520529359.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:15:59.847Z,1520529359.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:00.240Z,1520529360.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:00.256Z,1520529360.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:00.640Z,1520529360.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:00.655Z,1520529360.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:01.041Z,1520529361.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:01.062Z,1520529361.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:01.428Z,1520529361.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:01.443Z,1520529361.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:01.830Z,1520529361.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:01.847Z,1520529361.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:02.240Z,1520529362.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:02.262Z,1520529362.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:02.641Z,1520529362.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:02.655Z,1520529362.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:03.041Z,1520529363.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:03.056Z,1520529363.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:03.432Z,1520529363.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:03.447Z,1520529363.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:03.828Z,1520529363.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:03.844Z,1520529363.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:04.240Z,1520529364.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:04.262Z,1520529364.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:04.640Z,1520529364.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:04.655Z,1520529364.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:05.041Z,1520529365.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:05.057Z,1520529365.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:05.432Z,1520529365.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:05.454Z,1520529365.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:05.828Z,1520529365.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:05.843Z,1520529365.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:06.241Z,1520529366.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:06.256Z,1520529366.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:06.640Z,1520529366.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:06.662Z,1520529366.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:07.041Z,1520529367.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:07.056Z,1520529367.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:07.419Z,1520529367.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:07.454Z,1520529367.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:07.823Z,1520529367.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:07.850Z,1520529367.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:08.237Z,1520529368.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:08.258Z,1520529368.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:08.647Z,1520529368.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:08.662Z,1520529368.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:09.042Z,1520529369.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:09.057Z,1520529369.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:09.419Z,1520529369.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:09.446Z,1520529369.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:09.819Z,1520529369.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:09.856Z,1520529369.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:10.238Z,1520529370.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:10.258Z,1520529370.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:10.646Z,1520529370.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:10.661Z,1520529370.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:11.043Z,1520529371.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:11.058Z,1520529371.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:11.415Z,1520529371.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:11.451Z,1520529371.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:11.836Z,1520529371.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:11.852Z,1520529371.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:12.245Z,1520529372.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:12.260Z,1520529372.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:12.637Z,1520529372.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:12.669Z,1520529372.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:13.046Z,1520529373.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:13.061Z,1520529373.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:13.424Z,1520529373.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:13.452Z,1520529373.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:13.823Z,1520529373.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:13.851Z,1520529373.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:14.233Z,1520529374.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:14.260Z,1520529374.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:14.646Z,1520529374.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:14.662Z,1520529374.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:15.033Z,1520529375.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:15.057Z,1520529375.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:15.428Z,1520529375.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:15.455Z,1520529375.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:15.822Z,1520529375.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:15.850Z,1520529375.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:16.239Z,1520529376.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:16.262Z,1520529376.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:16.646Z,1520529376.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:16.662Z,1520529376.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:17.043Z,1520529377.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:17.058Z,1520529377.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:17.423Z,1520529377.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:17.451Z,1520529377.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:17.818Z,1520529377.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:17.851Z,1520529377.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:18.243Z,1520529378.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:18.258Z,1520529378.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:18.645Z,1520529378.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:18.661Z,1520529378.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:19.029Z,1520529379.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:19.067Z,1520529379.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:19.427Z,1520529379.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:19.457Z,1520529379.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:19.827Z,1520529379.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:19.856Z,1520529379.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:20.233Z,1520529380.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:20.262Z,1520529380.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:20.642Z,1520529380.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:20.658Z,1520529380.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:21.033Z,1520529381.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:21.064Z,1520529381.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:21.426Z,1520529381.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:21.456Z,1520529381.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:21.827Z,1520529381.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:21.856Z,1520529381.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:22.234Z,1520529382.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:22.260Z,1520529382.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:22.647Z,1520529382.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:22.663Z,1520529382.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:23.036Z,1520529383.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:23.059Z,1520529383.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:23.427Z,1520529383.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:23.463Z,1520529383.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:23.826Z,1520529383.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:23.856Z,1520529383.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:24.249Z,1520529384.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:24.264Z,1520529384.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:24.647Z,1520529384.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:24.662Z,1520529384.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:25.047Z,1520529385.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:25.063Z,1520529385.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:25.424Z,1520529385.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:25.439Z,1520529385.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:25.820Z,1520529385.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:25.835Z,1520529385.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:26.237Z,1520529386.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:26.260Z,1520529386.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:26.637Z,1520529386.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:26.661Z,1520529386.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:29.725Z,1520529389.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:29.741Z,1520529389.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:29.837Z,1520529389.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:29.860Z,1520529389.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:30.223Z,1520529390.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:30.239Z,1520529390.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:30.619Z,1520529390.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:30.634Z,1520529390.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:31.026Z,1520529391.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:31.047Z,1520529391.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:31.429Z,1520529391.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:31.450Z,1520529391.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:31.826Z,1520529391.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:31.847Z,1520529391.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:32.228Z,1520529392.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:32.243Z,1520529392.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:32.623Z,1520529392.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:32.638Z,1520529392.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:33.017Z,1520529393.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:33.033Z,1520529393.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:33.427Z,1520529393.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:33.447Z,1520529393.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:33.820Z,1520529393.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:33.835Z,1520529393.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:34.229Z,1520529394.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:34.245Z,1520529394.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:34.629Z,1520529394.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:34.645Z,1520529394.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:35.029Z,1520529395.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:35.050Z,1520529395.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:35.423Z,1520529395.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:35.439Z,1520529395.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:35.824Z,1520529395.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:35.840Z,1520529395.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:36.229Z,1520529396.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:36.245Z,1520529396.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:36.629Z,1520529396.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:36.644Z,1520529396.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:37.029Z,1520529397.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:37.044Z,1520529397.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:37.423Z,1520529397.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:37.442Z,1520529397.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:37.822Z,1520529397.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:37.838Z,1520529397.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:38.229Z,1520529398.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:38.244Z,1520529398.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:38.630Z,1520529398.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:38.645Z,1520529398.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:39.028Z,1520529399.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:39.043Z,1520529399.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:39.424Z,1520529399.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:39.440Z,1520529399.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:39.824Z,1520529399.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:39.847Z,1520529399.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:40.228Z,1520529400.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:40.243Z,1520529400.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:40.629Z,1520529400.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:40.645Z,1520529400.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:41.029Z,1520529401.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:41.045Z,1520529401.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:41.424Z,1520529401.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:41.439Z,1520529401.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:41.819Z,1520529401.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:41.838Z,1520529401.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:42.229Z,1520529402.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:42.245Z,1520529402.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:42.629Z,1520529402.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:42.644Z,1520529402.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:43.028Z,1520529403.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:43.043Z,1520529403.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:43.425Z,1520529403.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:43.441Z,1520529403.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:43.816Z,1520529403.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:43.849Z,1520529403.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:44.232Z,1520529404.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:44.248Z,1520529404.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:44.633Z,1520529404.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:44.648Z,1520529404.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:45.030Z,1520529405.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:45.046Z,1520529405.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:45.426Z,1520529405.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:45.447Z,1520529405.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:45.826Z,1520529405.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:45.841Z,1520529405.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:46.234Z,1520529406.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:46.251Z,1520529406.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:46.632Z,1520529406.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:46.648Z,1520529406.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:47.035Z,1520529407.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:47.051Z,1520529407.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:47.420Z,1520529407.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:47.447Z,1520529407.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:47.817Z,1520529407.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:47.839Z,1520529407.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:48.234Z,1520529408.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:48.250Z,1520529408.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:48.634Z,1520529408.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:48.649Z,1520529408.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:49.034Z,1520529409.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:49.051Z,1520529409.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:49.419Z,1520529409.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:49.441Z,1520529409.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:49.827Z,1520529409.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:49.842Z,1520529409.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:50.233Z,1520529410.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:50.249Z,1520529410.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:50.634Z,1520529410.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:50.649Z,1520529410.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:51.034Z,1520529411.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:51.051Z,1520529411.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:51.420Z,1520529411.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:51.437Z,1520529411.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:51.829Z,1520529411.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:51.845Z,1520529411.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:52.233Z,1520529412.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:52.251Z,1520529412.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:52.632Z,1520529412.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:52.649Z,1520529412.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:53.033Z,1520529413.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:53.049Z,1520529413.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:53.426Z,1520529413.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:53.442Z,1520529413.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:53.818Z,1520529413.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:53.838Z,1520529413.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:54.233Z,1520529414.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:54.249Z,1520529414.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:54.632Z,1520529414.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:54.648Z,1520529414.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:55.032Z,1520529415.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:55.075Z,1520529415.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:55.425Z,1520529415.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:55.440Z,1520529415.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:55.827Z,1520529415.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:55.843Z,1520529415.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:56.230Z,1520529416.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:56.245Z,1520529416.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:56.633Z,1520529416.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:56.649Z,1520529416.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:57.033Z,1520529417.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:57.051Z,1520529417.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:57.419Z,1520529417.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:57.434Z,1520529417.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:57.817Z,1520529417.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:57.838Z,1520529417.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:58.232Z,1520529418.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:58.248Z,1520529418.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:58.632Z,1520529418.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:58.648Z,1520529418.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:59.033Z,1520529419.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:59.051Z,1520529419.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:59.424Z,1520529419.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:59.439Z,1520529419.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:16:59.817Z,1520529419.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:16:59.833Z,1520529419.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:00.233Z,1520529420.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:00.249Z,1520529420.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:00.632Z,1520529420.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:00.649Z,1520529420.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:01.032Z,1520529421.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:01.048Z,1520529421.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:01.427Z,1520529421.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:01.442Z,1520529421.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:01.819Z,1520529421.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:01.838Z,1520529421.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:02.229Z,1520529422.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:02.244Z,1520529422.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:02.633Z,1520529422.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:02.648Z,1520529422.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:03.026Z,1520529423.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:03.041Z,1520529423.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:03.419Z,1520529423.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:03.439Z,1520529423.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:03.817Z,1520529423.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:03.838Z,1520529423.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:04.229Z,1520529424.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:04.251Z,1520529424.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:04.632Z,1520529424.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:04.647Z,1520529424.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:05.033Z,1520529425.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:05.051Z,1520529425.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:05.424Z,1520529425.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:05.440Z,1520529425.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:05.826Z,1520529425.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:05.842Z,1520529425.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:06.233Z,1520529426.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:06.249Z,1520529426.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:06.632Z,1520529426.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:06.658Z,1520529426.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:07.033Z,1520529427.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:07.049Z,1520529427.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:07.411Z,1520529427.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:07.447Z,1520529427.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:07.814Z,1520529427.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:07.840Z,1520529427.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:08.225Z,1520529428.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:08.249Z,1520529428.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:08.642Z,1520529428.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:08.662Z,1520529428.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:09.033Z,1520529429.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:09.049Z,1520529429.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:09.410Z,1520529429.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:09.438Z,1520529429.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:09.815Z,1520529429.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:09.847Z,1520529429.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:10.221Z,1520529430.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:10.257Z,1520529430.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:10.637Z,1520529430.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:10.653Z,1520529430.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:11.039Z,1520529431.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:11.054Z,1520529431.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:11.411Z,1520529431.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:11.446Z,1520529431.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:11.810Z,1520529431.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:11.838Z,1520529431.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:12.239Z,1520529432.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:12.255Z,1520529432.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:12.625Z,1520529432.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:12.660Z,1520529432.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:13.021Z,1520529433.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:13.053Z,1520529433.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:13.413Z,1520529433.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:13.429Z,1520529433.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:13.815Z,1520529433.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:13.834Z,1520529433.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:14.233Z,1520529434.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:14.258Z,1520529434.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:14.629Z,1520529434.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:14.660Z,1520529434.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:15.030Z,1520529435.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:15.061Z,1520529435.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:15.420Z,1520529435.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:15.435Z,1520529435.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:15.823Z,1520529435.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:15.839Z,1520529435.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:16.233Z,1520529436.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:16.269Z,1520529436.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:16.629Z,1520529436.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:16.644Z,1520529436.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:17.026Z,1520529437.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:17.041Z,1520529437.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:17.425Z,1520529437.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:17.440Z,1520529437.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:17.822Z,1520529437.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:17.837Z,1520529437.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:18.237Z,1520529438.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:18.269Z,1520529438.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:18.629Z,1520529438.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:18.645Z,1520529438.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:19.029Z,1520529439.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:19.045Z,1520529439.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:19.424Z,1520529439.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:19.440Z,1520529439.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:19.822Z,1520529439.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:19.843Z,1520529439.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:20.228Z,1520529440.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:20.244Z,1520529440.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:20.629Z,1520529440.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:20.645Z,1520529440.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:21.028Z,1520529441.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:21.043Z,1520529441.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:21.423Z,1520529441.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:21.439Z,1520529441.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:21.820Z,1520529441.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:21.835Z,1520529441.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:22.229Z,1520529442.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:22.245Z,1520529442.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:22.628Z,1520529442.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:22.643Z,1520529442.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:23.029Z,1520529443.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:23.044Z,1520529443.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:23.420Z,1520529443.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:23.435Z,1520529443.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:23.830Z,1520529443.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:23.846Z,1520529443.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:24.234Z,1520529444.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:24.250Z,1520529444.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:24.635Z,1520529444.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:24.662Z,1520529444.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:25.023Z,1520529445.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:25.062Z,1520529445.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:25.415Z,1520529445.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:25.452Z,1520529445.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:25.818Z,1520529445.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:25.850Z,1520529445.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:26.234Z,1520529446.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:26.250Z,1520529446.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:26.625Z,1520529446.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:26.665Z,1520529446.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:27.042Z,1520529447.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:27.057Z,1520529447.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:30.114Z,1520529450.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:30.149Z,1520529450.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:30.237Z,1520529450.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:30.263Z,1520529450.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:30.638Z,1520529450.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:30.662Z,1520529450.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:31.020Z,1520529451.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:31.037Z,1520529451.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:31.435Z,1520529451.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:31.462Z,1520529451.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:31.820Z,1520529451.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:31.835Z,1520529451.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:32.220Z,1520529452.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:32.235Z,1520529452.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:32.620Z,1520529452.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:32.635Z,1520529452.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:33.018Z,1520529453.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:33.033Z,1520529453.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:33.423Z,1520529453.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:33.439Z,1520529453.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:33.825Z,1520529453.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:33.840Z,1520529453.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:34.233Z,1520529454.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:34.262Z,1520529454.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:34.619Z,1520529454.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:34.634Z,1520529454.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:35.022Z,1520529455.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:35.042Z,1520529455.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:35.420Z,1520529455.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:35.435Z,1520529455.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:35.818Z,1520529455.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:35.834Z,1520529455.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:36.221Z,1520529456.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:36.237Z,1520529456.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:36.633Z,1520529456.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:36.660Z,1520529456.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:37.021Z,1520529457.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:37.042Z,1520529457.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:37.421Z,1520529457.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:37.436Z,1520529457.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:37.817Z,1520529457.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:37.832Z,1520529457.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:38.225Z,1520529458.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:38.241Z,1520529458.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:38.633Z,1520529458.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:38.665Z,1520529458.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:39.026Z,1520529459.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:39.041Z,1520529459.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:39.423Z,1520529459.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:39.439Z,1520529459.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:39.825Z,1520529459.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:39.840Z,1520529459.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:40.225Z,1520529460.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:40.240Z,1520529460.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:40.629Z,1520529460.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:40.644Z,1520529460.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:41.026Z,1520529461.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:41.041Z,1520529461.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:41.424Z,1520529461.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:41.439Z,1520529461.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:41.824Z,1520529461.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:41.839Z,1520529461.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:42.225Z,1520529462.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:42.241Z,1520529462.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:42.629Z,1520529462.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:42.644Z,1520529462.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:43.025Z,1520529463.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:43.041Z,1520529463.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:43.423Z,1520529463.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:43.438Z,1520529463.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:43.819Z,1520529463.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:43.834Z,1520529463.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:44.225Z,1520529464.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:44.241Z,1520529464.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:44.637Z,1520529464.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:44.652Z,1520529464.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:45.028Z,1520529465.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:45.050Z,1520529465.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:45.421Z,1520529465.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:45.437Z,1520529465.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:45.826Z,1520529465.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:45.842Z,1520529465.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:46.229Z,1520529466.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:46.244Z,1520529466.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:46.628Z,1520529466.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:46.643Z,1520529466.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:47.028Z,1520529467.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:47.043Z,1520529467.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:47.419Z,1520529467.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:47.434Z,1520529467.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:47.825Z,1520529467.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:47.841Z,1520529467.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:48.228Z,1520529468.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:48.243Z,1520529468.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:48.632Z,1520529468.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:48.647Z,1520529468.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:49.026Z,1520529469.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:49.041Z,1520529469.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:49.426Z,1520529469.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:49.441Z,1520529469.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:49.826Z,1520529469.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:49.841Z,1520529469.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:50.229Z,1520529470.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:50.244Z,1520529470.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:50.630Z,1520529470.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:50.657Z,1520529470.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:51.036Z,1520529471.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:51.058Z,1520529471.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:51.426Z,1520529471.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:51.442Z,1520529471.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:51.826Z,1520529471.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:51.842Z,1520529471.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:52.229Z,1520529472.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:52.244Z,1520529472.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:52.629Z,1520529472.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:52.645Z,1520529472.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:53.036Z,1520529473.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:53.051Z,1520529473.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:53.429Z,1520529473.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:53.444Z,1520529473.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:53.808Z,1520529473.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:53.840Z,1520529473.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:54.237Z,1520529474.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:54.252Z,1520529474.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:54.640Z,1520529474.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:54.655Z,1520529474.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:55.029Z,1520529475.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:55.044Z,1520529475.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:55.411Z,1520529475.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:55.439Z,1520529475.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:55.828Z,1520529475.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:55.843Z,1520529475.843 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:55.843Z,1520529475.843 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 191
2018-03-08T17:17:55.843Z,1520529475.843 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T17:17:55.845Z,1520529475.845 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:55.845Z,1520529475.845 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 191
2018-03-08T17:17:55.845Z,1520529475.845 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T17:17:55.847Z,1520529475.847 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:55.847Z,1520529475.847 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 191
2018-03-08T17:17:55.847Z,1520529475.847 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T17:17:55.859Z,1520529475.859 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T17:17:55.859Z,1520529475.859 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T17:17:55.859Z,1520529475.859 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T17:17:56.236Z,1520529476.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:56.270Z,1520529476.270 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T17:17:56.270Z,1520529476.270 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 191
2018-03-08T17:17:56.270Z,1520529476.270 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T17:17:56.270Z,1520529476.270 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 191
2018-03-08T17:17:56.271Z,1520529476.271 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T17:17:56.271Z,1520529476.271 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 191
2018-03-08T17:17:56.637Z,1520529476.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:56.651Z,1520529476.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T17:17:56.651Z,1520529476.651 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:17:56.652Z,1520529476.652 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:17:56.652Z,1520529476.652 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T17:17:56.653Z,1520529476.653 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:17:56.653Z,1520529476.653 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:17:56.653Z,1520529476.653 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T17:17:56.654Z,1520529476.654 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:17:56.654Z,1520529476.654 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:17:57.021Z,1520529477.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:57.054Z,1520529477.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T17:17:57.055Z,1520529477.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:57.418Z,1520529477.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:57.446Z,1520529477.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T17:17:57.447Z,1520529477.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:57.811Z,1520529477.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:57.846Z,1520529477.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T17:17:57.847Z,1520529477.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:58.238Z,1520529478.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:58.252Z,1520529478.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T17:17:58.253Z,1520529478.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:58.637Z,1520529478.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:58.673Z,1520529478.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T17:17:58.674Z,1520529478.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:59.045Z,1520529479.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:59.060Z,1520529479.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T17:17:59.061Z,1520529479.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:59.419Z,1520529479.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:59.446Z,1520529479.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T17:17:59.447Z,1520529479.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:17:59.811Z,1520529479.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:17:59.842Z,1520529479.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T17:17:59.843Z,1520529479.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:00.222Z,1520529480.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:00.249Z,1520529480.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T17:18:00.249Z,1520529480.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:00.625Z,1520529480.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:00.651Z,1520529480.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T17:18:00.652Z,1520529480.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:01.025Z,1520529481.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:01.052Z,1520529481.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T17:18:01.053Z,1520529481.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:01.420Z,1520529481.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:01.446Z,1520529481.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T17:18:01.447Z,1520529481.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:01.812Z,1520529481.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:01.827Z,1520529481.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T17:18:01.828Z,1520529481.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:02.233Z,1520529482.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:02.253Z,1520529482.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T17:18:02.254Z,1520529482.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:02.637Z,1520529482.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:02.652Z,1520529482.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T17:18:02.653Z,1520529482.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:03.034Z,1520529483.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:03.048Z,1520529483.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T17:18:03.049Z,1520529483.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:03.407Z,1520529483.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:03.434Z,1520529483.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T17:18:03.435Z,1520529483.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:03.817Z,1520529483.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:03.843Z,1520529483.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T17:18:03.844Z,1520529483.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:04.237Z,1520529484.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:04.252Z,1520529484.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T17:18:04.254Z,1520529484.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:04.638Z,1520529484.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:04.653Z,1520529484.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T17:18:04.654Z,1520529484.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:05.035Z,1520529485.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:05.050Z,1520529485.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T17:18:05.051Z,1520529485.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:05.415Z,1520529485.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:05.447Z,1520529485.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T17:18:05.448Z,1520529485.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:05.815Z,1520529485.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:05.846Z,1520529485.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T17:18:05.847Z,1520529485.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:06.225Z,1520529486.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:06.253Z,1520529486.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T17:18:06.254Z,1520529486.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:06.625Z,1520529486.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:06.652Z,1520529486.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T17:18:06.653Z,1520529486.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:07.026Z,1520529487.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:07.062Z,1520529487.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T17:18:07.063Z,1520529487.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:07.420Z,1520529487.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:07.434Z,1520529487.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T17:18:07.435Z,1520529487.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:07.817Z,1520529487.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:07.832Z,1520529487.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T17:18:07.833Z,1520529487.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:08.230Z,1520529488.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:08.253Z,1520529488.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T17:18:08.254Z,1520529488.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:08.634Z,1520529488.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:08.728Z,1520529488.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-08T17:18:08.729Z,1520529488.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:09.034Z,1520529489.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:09.066Z,1520529489.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T17:18:09.067Z,1520529489.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:09.423Z,1520529489.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:09.439Z,1520529489.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T17:18:09.441Z,1520529489.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:09.820Z,1520529489.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:09.836Z,1520529489.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T17:18:09.837Z,1520529489.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:10.225Z,1520529490.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:10.241Z,1520529490.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T17:18:10.242Z,1520529490.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:10.628Z,1520529490.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:10.643Z,1520529490.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T17:18:10.645Z,1520529490.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:11.024Z,1520529491.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:11.047Z,1520529491.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T17:18:11.048Z,1520529491.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:11.423Z,1520529491.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:11.438Z,1520529491.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T17:18:11.438Z,1520529491.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:11.823Z,1520529491.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:11.839Z,1520529491.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T17:18:11.840Z,1520529491.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:12.229Z,1520529492.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:12.243Z,1520529492.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T17:18:12.244Z,1520529492.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:12.630Z,1520529492.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:12.724Z,1520529492.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T17:18:12.729Z,1520529492.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:13.033Z,1520529493.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:13.048Z,1520529493.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T17:18:13.049Z,1520529493.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:13.425Z,1520529493.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:13.440Z,1520529493.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T17:18:13.441Z,1520529493.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:13.819Z,1520529493.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:13.834Z,1520529493.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T17:18:13.835Z,1520529493.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:14.233Z,1520529494.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:14.254Z,1520529494.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T17:18:14.255Z,1520529494.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:14.632Z,1520529494.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:14.647Z,1520529494.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T17:18:14.648Z,1520529494.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:15.032Z,1520529495.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:15.054Z,1520529495.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T17:18:15.055Z,1520529495.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:15.477Z,1520529495.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:15.635Z,1520529495.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-03-08T17:18:15.636Z,1520529495.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:15.827Z,1520529495.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:15.847Z,1520529495.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:16.229Z,1520529496.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:16.250Z,1520529496.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:16.633Z,1520529496.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:16.649Z,1520529496.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:17.032Z,1520529497.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:17.054Z,1520529497.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:17.466Z,1520529497.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:17.482Z,1520529497.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:17.815Z,1520529497.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:17.830Z,1520529497.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:18.229Z,1520529498.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:18.245Z,1520529498.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:18.628Z,1520529498.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:18.651Z,1520529498.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:19.029Z,1520529499.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:19.044Z,1520529499.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:19.421Z,1520529499.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:19.436Z,1520529499.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:19.821Z,1520529499.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:19.836Z,1520529499.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:20.229Z,1520529500.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:20.245Z,1520529500.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:20.629Z,1520529500.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:20.644Z,1520529500.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:21.028Z,1520529501.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:21.043Z,1520529501.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:21.425Z,1520529501.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:21.440Z,1520529501.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:21.822Z,1520529501.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:21.838Z,1520529501.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:22.228Z,1520529502.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:22.250Z,1520529502.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:22.629Z,1520529502.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:22.644Z,1520529502.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:23.028Z,1520529503.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:23.050Z,1520529503.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:23.423Z,1520529503.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:23.439Z,1520529503.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:23.824Z,1520529503.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:23.839Z,1520529503.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:24.228Z,1520529504.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:24.244Z,1520529504.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:24.629Z,1520529504.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:24.644Z,1520529504.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:25.029Z,1520529505.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:25.044Z,1520529505.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:25.423Z,1520529505.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:25.439Z,1520529505.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:25.820Z,1520529505.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:25.835Z,1520529505.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:26.230Z,1520529506.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:26.245Z,1520529506.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:26.248Z,1520529506.248 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T17:18:26.249Z,1520529506.249 [Default:CheckIn:C.Wait] Stopped
2018-03-08T17:18:26.249Z,1520529506.249 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T17:18:26.249Z,1520529506.249 [Default:CheckIn:D] Running Loop=1
2018-03-08T17:18:26.637Z,1520529506.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:26.652Z,1520529506.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:26.655Z,1520529506.655 [Default:CheckIn:D] Stopped
2018-03-08T17:18:26.655Z,1520529506.655 [Default:CheckIn:E] Running Loop=1
2018-03-08T17:18:27.029Z,1520529507.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:27.044Z,1520529507.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:27.047Z,1520529507.047 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 572.697526 min 
2018-03-08T17:18:27.048Z,1520529507.048 [Default:CheckIn:E] Stopped
2018-03-08T17:18:27.048Z,1520529507.048 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T17:18:27.048Z,1520529507.048 [Default:CheckIn] Stopped
2018-03-08T17:18:27.048Z,1520529507.048 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T17:18:27.048Z,1520529507.048 [Default:CheckIn](INFO): Running loop #56
2018-03-08T17:18:27.048Z,1520529507.048 [Default:CheckIn] Running Loop=56
2018-03-08T17:18:27.048Z,1520529507.048 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T17:18:27.048Z,1520529507.048 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T17:18:30.115Z,1520529510.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:30.131Z,1520529510.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:30.232Z,1520529510.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:30.248Z,1520529510.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:30.605Z,1520529510.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:30.627Z,1520529510.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:30.994Z,1520529510.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:31.022Z,1520529511.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:31.395Z,1520529511.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:31.435Z,1520529511.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:31.792Z,1520529511.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:31.807Z,1520529511.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:32.195Z,1520529512.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:32.210Z,1520529512.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:32.592Z,1520529512.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:32.611Z,1520529512.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:32.992Z,1520529512.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:33.008Z,1520529513.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:33.398Z,1520529513.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:33.435Z,1520529513.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:33.809Z,1520529513.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:33.830Z,1520529513.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:34.194Z,1520529514.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:34.213Z,1520529514.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:34.595Z,1520529514.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:34.610Z,1520529514.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:34.996Z,1520529514.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:35.012Z,1520529515.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:35.394Z,1520529515.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:35.414Z,1520529515.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:35.790Z,1520529515.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:35.810Z,1520529515.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:36.196Z,1520529516.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:36.212Z,1520529516.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:36.598Z,1520529516.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:36.613Z,1520529516.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:36.997Z,1520529516.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:37.013Z,1520529517.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:37.393Z,1520529517.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:37.412Z,1520529517.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:37.794Z,1520529517.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:37.814Z,1520529517.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:38.211Z,1520529518.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:38.235Z,1520529518.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:38.593Z,1520529518.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:38.619Z,1520529518.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:38.000Z,1520529519.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:39.022Z,1520529519.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:39.396Z,1520529519.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:39.415Z,1520529519.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:39.796Z,1520529519.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:39.811Z,1520529519.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:40.199Z,1520529520.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:40.219Z,1520529520.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:40.601Z,1520529520.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:40.617Z,1520529520.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:40.000Z,1520529521.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:41.015Z,1520529521.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:41.389Z,1520529521.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:41.412Z,1520529521.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:41.795Z,1520529521.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:41.810Z,1520529521.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:42.201Z,1520529522.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:42.225Z,1520529522.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:42.608Z,1520529522.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:42.631Z,1520529522.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:43.005Z,1520529523.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:43.021Z,1520529523.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:43.393Z,1520529523.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:43.414Z,1520529523.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:43.779Z,1520529523.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:43.826Z,1520529523.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:44.208Z,1520529524.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:44.245Z,1520529524.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:44.605Z,1520529524.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:44.621Z,1520529524.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:45.002Z,1520529525.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:45.018Z,1520529525.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:45.383Z,1520529525.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:45.418Z,1520529525.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:45.775Z,1520529525.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:45.812Z,1520529525.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:46.182Z,1520529526.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:46.222Z,1520529526.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:46.606Z,1520529526.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:46.621Z,1520529526.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:47.008Z,1520529527.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:47.024Z,1520529527.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:47.405Z,1520529527.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:47.422Z,1520529527.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:47.776Z,1520529527.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:47.810Z,1520529527.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:48.179Z,1520529528.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:48.214Z,1520529528.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:48.583Z,1520529528.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:48.615Z,1520529528.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:48.975Z,1520529528.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:49.010Z,1520529529.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:49.403Z,1520529529.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:49.418Z,1520529529.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.407834 seconds old.
2018-03-08T17:18:49.419Z,1520529529.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:49.419Z,1520529529.419 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.408167 seconds old.
2018-03-08T17:18:49.421Z,1520529529.421 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.408513 seconds old.
2018-03-08T17:18:49.801Z,1520529529.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:49.815Z,1520529529.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.805540 seconds old.
2018-03-08T17:18:49.817Z,1520529529.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:49.817Z,1520529529.817 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.806083 seconds old.
2018-03-08T17:18:49.818Z,1520529529.818 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.806445 seconds old.
2018-03-08T17:18:50.197Z,1520529530.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:50.228Z,1520529530.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.218333 seconds old.
2018-03-08T17:18:50.229Z,1520529530.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:50.230Z,1520529530.230 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.218736 seconds old.
2018-03-08T17:18:50.231Z,1520529530.231 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.219077 seconds old.
2018-03-08T17:18:50.575Z,1520529530.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:50.613Z,1520529530.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.602604 seconds old.
2018-03-08T17:18:50.614Z,1520529530.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:50.615Z,1520529530.615 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.603192 seconds old.
2018-03-08T17:18:50.616Z,1520529530.616 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.603522 seconds old.
2018-03-08T17:18:51.002Z,1520529531.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:51.016Z,1520529531.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.006059 seconds old.
2018-03-08T17:18:51.017Z,1520529531.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:51.018Z,1520529531.018 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.006602 seconds old.
2018-03-08T17:18:51.019Z,1520529531.019 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.006942 seconds old.
2018-03-08T17:18:51.377Z,1520529531.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:51.409Z,1520529531.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.399092 seconds old.
2018-03-08T17:18:51.410Z,1520529531.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:51.411Z,1520529531.411 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.399407 seconds old.
2018-03-08T17:18:51.412Z,1520529531.412 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.399744 seconds old.
2018-03-08T17:18:51.775Z,1520529531.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:51.817Z,1520529531.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.807375 seconds old.
2018-03-08T17:18:51.818Z,1520529531.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:51.819Z,1520529531.819 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.807708 seconds old.
2018-03-08T17:18:51.820Z,1520529531.820 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.808045 seconds old.
2018-03-08T17:18:52.195Z,1520529532.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:52.214Z,1520529532.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:52.604Z,1520529532.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:52.619Z,1520529532.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:53.006Z,1520529533.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:53.026Z,1520529533.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:53.404Z,1520529533.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:53.419Z,1520529533.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:53.779Z,1520529533.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:53.811Z,1520529533.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:54.193Z,1520529534.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:54.208Z,1520529534.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:54.591Z,1520529534.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:54.607Z,1520529534.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:54.975Z,1520529534.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:55.011Z,1520529535.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:55.407Z,1520529535.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:55.422Z,1520529535.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:55.806Z,1520529535.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:55.827Z,1520529535.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:56.205Z,1520529536.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:56.226Z,1520529536.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:56.591Z,1520529536.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:56.610Z,1520529536.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:56.978Z,1520529536.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:57.018Z,1520529537.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:57.396Z,1520529537.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:57.410Z,1520529537.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:57.795Z,1520529537.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:57.811Z,1520529537.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:58.199Z,1520529538.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:58.220Z,1520529538.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:58.610Z,1520529538.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:58.625Z,1520529538.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:59.002Z,1520529539.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:59.022Z,1520529539.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:59.394Z,1520529539.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:59.414Z,1520529539.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:18:59.775Z,1520529539.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:18:59.811Z,1520529539.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:00.206Z,1520529540.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:00.221Z,1520529540.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:00.600Z,1520529540.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:00.623Z,1520529540.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:00.995Z,1520529540.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:01.020Z,1520529541.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:01.391Z,1520529541.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:01.411Z,1520529541.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:01.779Z,1520529541.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:01.811Z,1520529541.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:02.192Z,1520529542.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:02.207Z,1520529542.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:02.604Z,1520529542.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:02.620Z,1520529542.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:03.003Z,1520529543.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:03.019Z,1520529543.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:03.407Z,1520529543.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:03.422Z,1520529543.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:03.790Z,1520529543.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:03.810Z,1520529543.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:04.185Z,1520529544.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:04.211Z,1520529544.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:04.575Z,1520529544.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:04.615Z,1520529544.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:04.995Z,1520529544.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:05.030Z,1520529545.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:05.399Z,1520529545.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:05.418Z,1520529545.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:05.795Z,1520529545.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:05.823Z,1520529545.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:06.203Z,1520529546.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:06.218Z,1520529546.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:06.594Z,1520529546.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:06.613Z,1520529546.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:06.991Z,1520529546.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:07.006Z,1520529547.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:07.396Z,1520529547.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:07.411Z,1520529547.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:07.778Z,1520529547.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:07.822Z,1520529547.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:08.207Z,1520529548.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:08.231Z,1520529548.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:08.603Z,1520529548.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:08.618Z,1520529548.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:09.001Z,1520529549.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:09.016Z,1520529549.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:09.379Z,1520529549.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:09.411Z,1520529549.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:09.795Z,1520529549.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:09.814Z,1520529549.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:10.201Z,1520529550.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:10.216Z,1520529550.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:10.605Z,1520529550.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:10.619Z,1520529550.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:11.005Z,1520529551.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:11.020Z,1520529551.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:11.379Z,1520529551.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:11.410Z,1520529551.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:11.776Z,1520529551.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:11.811Z,1520529551.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:12.182Z,1520529552.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:12.219Z,1520529552.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:12.606Z,1520529552.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:12.621Z,1520529552.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:13.005Z,1520529553.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:13.020Z,1520529553.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:13.403Z,1520529553.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:13.422Z,1520529553.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:13.782Z,1520529553.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:13.808Z,1520529553.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:14.179Z,1520529554.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:14.215Z,1520529554.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:14.585Z,1520529554.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:14.622Z,1520529554.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:14.985Z,1520529554.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:15.011Z,1520529555.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:15.402Z,1520529555.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:15.417Z,1520529555.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:15.803Z,1520529555.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:15.839Z,1520529555.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:16.196Z,1520529556.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:16.223Z,1520529556.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:16.581Z,1520529556.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:16.617Z,1520529556.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:16.990Z,1520529556.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:17.025Z,1520529557.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:17.384Z,1520529557.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:17.430Z,1520529557.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:17.788Z,1520529557.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:17.825Z,1520529557.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:18.198Z,1520529558.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:18.226Z,1520529558.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:18.601Z,1520529558.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:18.630Z,1520529558.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:18.999Z,1520529558.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:19.026Z,1520529559.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:19.380Z,1520529559.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:19.413Z,1520529559.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:19.787Z,1520529559.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:19.803Z,1520529559.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:20.190Z,1520529560.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:20.205Z,1520529560.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:20.587Z,1520529560.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:20.626Z,1520529560.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:21.005Z,1520529561.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:21.050Z,1520529561.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:21.399Z,1520529561.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:21.430Z,1520529561.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:21.784Z,1520529561.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:21.801Z,1520529561.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:22.189Z,1520529562.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:22.229Z,1520529562.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:22.580Z,1520529562.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:22.619Z,1520529562.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:22.986Z,1520529562.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:23.003Z,1520529563.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:23.406Z,1520529563.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:23.431Z,1520529563.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:23.789Z,1520529563.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:23.822Z,1520529563.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:24.192Z,1520529564.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:24.226Z,1520529564.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:24.588Z,1520529564.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:24.604Z,1520529564.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:24.989Z,1520529564.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:25.004Z,1520529565.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:25.382Z,1520529565.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:25.421Z,1520529565.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:25.787Z,1520529565.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:25.827Z,1520529565.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:26.191Z,1520529566.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:26.206Z,1520529566.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:26.590Z,1520529566.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:26.619Z,1520529566.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:26.000Z,1520529567.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:27.016Z,1520529567.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:27.400Z,1520529567.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:27.439Z,1520529567.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:30.511Z,1520529570.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:30.540Z,1520529570.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:30.638Z,1520529570.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:30.658Z,1520529570.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:31.013Z,1520529571.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:31.035Z,1520529571.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:31.397Z,1520529571.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:31.413Z,1520529571.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:31.812Z,1520529571.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:31.847Z,1520529571.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:32.192Z,1520529572.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:32.219Z,1520529572.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:32.596Z,1520529572.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:32.612Z,1520529572.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:32.991Z,1520529572.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:33.030Z,1520529573.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:33.410Z,1520529573.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:33.439Z,1520529573.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:33.795Z,1520529573.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:33.811Z,1520529573.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:34.213Z,1520529574.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:34.242Z,1520529574.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:34.594Z,1520529574.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:34.609Z,1520529574.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:34.991Z,1520529574.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:35.011Z,1520529575.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:35.399Z,1520529575.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:35.414Z,1520529575.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:35.796Z,1520529575.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:35.811Z,1520529575.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:36.201Z,1520529576.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:36.229Z,1520529576.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:36.612Z,1520529576.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:36.650Z,1520529576.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:37.000Z,1520529577.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:37.015Z,1520529577.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:37.402Z,1520529577.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:37.417Z,1520529577.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:37.796Z,1520529577.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:37.818Z,1520529577.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:38.213Z,1520529578.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:38.243Z,1520529578.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:38.600Z,1520529578.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:38.615Z,1520529578.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:39.013Z,1520529579.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:39.043Z,1520529579.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:39.397Z,1520529579.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:39.411Z,1520529579.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:39.798Z,1520529579.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:39.815Z,1520529579.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:40.210Z,1520529580.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:40.242Z,1520529580.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:40.617Z,1520529580.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:40.645Z,1520529580.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:41.001Z,1520529581.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:41.017Z,1520529581.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:41.402Z,1520529581.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:41.418Z,1520529581.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:41.803Z,1520529581.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:41.818Z,1520529581.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:42.219Z,1520529582.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:42.245Z,1520529582.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:42.605Z,1520529582.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:42.626Z,1520529582.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:43.004Z,1520529583.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:43.019Z,1520529583.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:43.404Z,1520529583.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:43.420Z,1520529583.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:43.795Z,1520529583.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:43.819Z,1520529583.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:44.204Z,1520529584.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:44.226Z,1520529584.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:44.605Z,1520529584.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:44.620Z,1520529584.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:45.010Z,1520529585.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:45.047Z,1520529585.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:45.402Z,1520529585.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:45.417Z,1520529585.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:45.805Z,1520529585.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:45.820Z,1520529585.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:46.208Z,1520529586.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:46.230Z,1520529586.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:46.609Z,1520529586.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:46.624Z,1520529586.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:47.000Z,1520529587.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:47.033Z,1520529587.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:47.390Z,1520529587.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:47.416Z,1520529587.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:47.783Z,1520529587.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:47.819Z,1520529587.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:48.209Z,1520529588.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:48.230Z,1520529588.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:48.610Z,1520529588.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:48.625Z,1520529588.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:49.005Z,1520529589.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:49.020Z,1520529589.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:49.387Z,1520529589.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:49.420Z,1520529589.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:49.793Z,1520529589.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:49.826Z,1520529589.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:50.213Z,1520529590.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:50.228Z,1520529590.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:50.605Z,1520529590.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:50.625Z,1520529590.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:51.010Z,1520529591.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:51.037Z,1520529591.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:51.394Z,1520529591.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:51.419Z,1520529591.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:51.794Z,1520529591.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:51.821Z,1520529591.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:52.210Z,1520529592.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:52.225Z,1520529592.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:52.612Z,1520529592.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:52.631Z,1520529592.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:52.998Z,1520529592.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:53.035Z,1520529593.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:53.389Z,1520529593.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:53.421Z,1520529593.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:53.790Z,1520529593.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:53.829Z,1520529593.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:54.198Z,1520529594.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:54.236Z,1520529594.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:54.615Z,1520529594.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:54.631Z,1520529594.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:54.998Z,1520529594.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:55.024Z,1520529595.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:55.389Z,1520529595.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:55.421Z,1520529595.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:55.791Z,1520529595.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:55.838Z,1520529595.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:56.200Z,1520529596.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:56.234Z,1520529596.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:56.598Z,1520529596.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:56.630Z,1520529596.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:57.009Z,1520529597.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:57.038Z,1520529597.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:57.398Z,1520529597.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:57.434Z,1520529597.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:57.788Z,1520529597.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:57.805Z,1520529597.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:58.205Z,1520529598.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:58.230Z,1520529598.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:58.620Z,1520529598.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:58.635Z,1520529598.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:58.999Z,1520529598.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:59.074Z,1520529599.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:59.399Z,1520529599.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:59.431Z,1520529599.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:19:59.797Z,1520529599.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:19:59.839Z,1520529599.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:00.202Z,1520529600.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:00.229Z,1520529600.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:00.612Z,1520529600.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:00.638Z,1520529600.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:01.004Z,1520529601.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:01.018Z,1520529601.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:01.406Z,1520529601.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:01.430Z,1520529601.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:01.797Z,1520529601.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:01.813Z,1520529601.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:02.213Z,1520529602.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:02.243Z,1520529602.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:02.600Z,1520529602.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:02.617Z,1520529602.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:02.998Z,1520529602.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:03.023Z,1520529603.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:03.398Z,1520529603.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:03.414Z,1520529603.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:03.802Z,1520529603.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:03.818Z,1520529603.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:04.206Z,1520529604.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:04.227Z,1520529604.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:04.617Z,1520529604.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:04.645Z,1520529604.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:05.001Z,1520529605.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:05.017Z,1520529605.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:05.395Z,1520529605.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:05.422Z,1520529605.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:05.806Z,1520529605.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:05.826Z,1520529605.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:06.207Z,1520529606.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:06.222Z,1520529606.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:06.608Z,1520529606.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:06.623Z,1520529606.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:07.012Z,1520529607.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:07.027Z,1520529607.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:07.401Z,1520529607.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:07.416Z,1520529607.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:07.791Z,1520529607.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:07.823Z,1520529607.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:08.209Z,1520529608.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:08.224Z,1520529608.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:08.610Z,1520529608.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:08.626Z,1520529608.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:09.007Z,1520529609.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:09.026Z,1520529609.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:09.390Z,1520529609.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:09.415Z,1520529609.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:09.791Z,1520529609.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:09.818Z,1520529609.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:10.209Z,1520529610.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:10.225Z,1520529610.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:10.611Z,1520529610.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:10.626Z,1520529610.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:11.006Z,1520529611.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:11.026Z,1520529611.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:11.390Z,1520529611.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:11.417Z,1520529611.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:11.790Z,1520529611.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:11.822Z,1520529611.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:12.204Z,1520529612.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:12.224Z,1520529612.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:12.605Z,1520529612.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:12.636Z,1520529612.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:13.009Z,1520529613.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:13.024Z,1520529613.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:13.387Z,1520529613.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:13.420Z,1520529613.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:13.794Z,1520529613.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:13.821Z,1520529613.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:14.201Z,1520529614.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:14.224Z,1520529614.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:14.610Z,1520529614.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:14.625Z,1520529614.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:15.013Z,1520529615.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:15.029Z,1520529615.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:15.390Z,1520529615.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:15.417Z,1520529615.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:15.796Z,1520529615.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:15.828Z,1520529615.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:16.209Z,1520529616.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:16.225Z,1520529616.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:16.613Z,1520529616.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:16.628Z,1520529616.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:17.008Z,1520529617.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:17.024Z,1520529617.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:17.390Z,1520529617.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:17.416Z,1520529617.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:17.789Z,1520529617.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:17.819Z,1520529617.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:18.209Z,1520529618.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:18.266Z,1520529618.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:18.612Z,1520529618.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:18.627Z,1520529618.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:19.005Z,1520529619.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:19.021Z,1520529619.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:19.389Z,1520529619.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:19.421Z,1520529619.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:19.791Z,1520529619.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:19.822Z,1520529619.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:20.200Z,1520529620.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:20.234Z,1520529620.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:20.598Z,1520529620.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:20.622Z,1520529620.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:21.001Z,1520529621.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:21.029Z,1520529621.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:21.387Z,1520529621.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:21.426Z,1520529621.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:21.793Z,1520529621.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:21.824Z,1520529621.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:22.198Z,1520529622.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:22.224Z,1520529622.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:22.602Z,1520529622.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:22.628Z,1520529622.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:22.992Z,1520529622.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:23.035Z,1520529623.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:23.392Z,1520529623.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:23.408Z,1520529623.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:23.797Z,1520529623.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:23.829Z,1520529623.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:24.201Z,1520529624.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:24.237Z,1520529624.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:24.603Z,1520529624.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:24.635Z,1520529624.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:25.006Z,1520529625.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:25.038Z,1520529625.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:25.398Z,1520529625.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:25.414Z,1520529625.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:25.796Z,1520529625.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:25.811Z,1520529625.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:26.208Z,1520529626.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:26.238Z,1520529626.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:26.596Z,1520529626.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:26.611Z,1520529626.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:27.013Z,1520529627.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:27.036Z,1520529627.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:27.400Z,1520529627.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:27.416Z,1520529627.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:30.578Z,1520529630.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:30.594Z,1520529630.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:30.701Z,1520529630.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:30.741Z,1520529630.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:31.076Z,1520529631.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:31.099Z,1520529631.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:31.465Z,1520529631.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:31.490Z,1520529631.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:31.847Z,1520529631.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:31.863Z,1520529631.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:32.251Z,1520529632.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:32.287Z,1520529632.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:32.651Z,1520529632.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:32.666Z,1520529632.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:33.046Z,1520529633.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:33.065Z,1520529633.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:33.466Z,1520529633.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:33.489Z,1520529633.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:33.861Z,1520529633.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:33.892Z,1520529633.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:34.261Z,1520529634.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:34.291Z,1520529634.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:34.649Z,1520529634.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:34.665Z,1520529634.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:35.052Z,1520529635.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:35.067Z,1520529635.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:35.448Z,1520529635.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:35.464Z,1520529635.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:35.852Z,1520529635.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:35.867Z,1520529635.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:36.265Z,1520529636.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:36.289Z,1520529636.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:36.649Z,1520529636.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:36.665Z,1520529636.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:37.065Z,1520529637.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:37.087Z,1520529637.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:37.447Z,1520529637.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:37.483Z,1520529637.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:37.848Z,1520529637.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:37.863Z,1520529637.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:38.248Z,1520529638.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:38.267Z,1520529638.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:38.652Z,1520529638.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:38.667Z,1520529638.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:39.043Z,1520529639.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:39.075Z,1520529639.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:39.457Z,1520529639.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:39.473Z,1520529639.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:39.861Z,1520529639.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:39.876Z,1520529639.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:40.259Z,1520529640.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:40.275Z,1520529640.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:40.653Z,1520529640.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:40.668Z,1520529640.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:41.055Z,1520529641.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:41.070Z,1520529641.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:41.457Z,1520529641.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:41.472Z,1520529641.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:41.855Z,1520529641.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:41.870Z,1520529641.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:42.258Z,1520529642.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:42.273Z,1520529642.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:42.657Z,1520529642.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:42.673Z,1520529642.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:43.057Z,1520529643.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:43.073Z,1520529643.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:43.456Z,1520529643.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:43.471Z,1520529643.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:43.854Z,1520529643.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:43.869Z,1520529643.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:44.256Z,1520529644.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:44.272Z,1520529644.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:44.657Z,1520529644.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:44.672Z,1520529644.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:45.040Z,1520529645.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:45.075Z,1520529645.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:45.462Z,1520529645.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:45.478Z,1520529645.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:45.862Z,1520529645.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:45.877Z,1520529645.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:46.258Z,1520529646.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:46.278Z,1520529646.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:46.656Z,1520529646.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:46.672Z,1520529646.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:47.051Z,1520529647.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:47.068Z,1520529647.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:47.449Z,1520529647.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:47.478Z,1520529647.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:47.855Z,1520529647.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:47.871Z,1520529647.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:48.264Z,1520529648.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:48.281Z,1520529648.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:48.661Z,1520529648.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:48.677Z,1520529648.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:49.060Z,1520529649.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:49.075Z,1520529649.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:49.439Z,1520529649.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:49.465Z,1520529649.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:49.845Z,1520529649.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:49.877Z,1520529649.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:50.247Z,1520529650.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:50.273Z,1520529650.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:50.643Z,1520529650.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:50.670Z,1520529650.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:51.040Z,1520529651.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:51.074Z,1520529651.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:51.457Z,1520529651.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:51.479Z,1520529651.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:51.867Z,1520529651.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:51.882Z,1520529651.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:52.265Z,1520529652.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:52.281Z,1520529652.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:52.659Z,1520529652.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:52.678Z,1520529652.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:53.043Z,1520529653.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:53.069Z,1520529653.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:53.447Z,1520529653.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:53.474Z,1520529653.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:53.843Z,1520529653.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:53.869Z,1520529653.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:54.260Z,1520529654.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:54.283Z,1520529654.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:54.662Z,1520529654.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:54.678Z,1520529654.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:55.061Z,1520529655.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:55.076Z,1520529655.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:55.439Z,1520529655.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:55.470Z,1520529655.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:55.847Z,1520529655.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:55.873Z,1520529655.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:56.243Z,1520529656.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:56.269Z,1520529656.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:56.643Z,1520529656.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:56.678Z,1520529656.678 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:56.678Z,1520529656.678 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 192
2018-03-08T17:20:56.678Z,1520529656.678 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T17:20:56.680Z,1520529656.680 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:56.680Z,1520529656.680 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 192
2018-03-08T17:20:56.680Z,1520529656.680 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T17:20:56.682Z,1520529656.682 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:56.682Z,1520529656.682 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 192
2018-03-08T17:20:56.682Z,1520529656.682 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T17:20:56.693Z,1520529656.693 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T17:20:56.694Z,1520529656.694 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T17:20:56.694Z,1520529656.694 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T17:20:57.043Z,1520529657.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:57.085Z,1520529657.085 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T17:20:57.085Z,1520529657.085 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 192
2018-03-08T17:20:57.085Z,1520529657.085 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T17:20:57.085Z,1520529657.085 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 192
2018-03-08T17:20:57.086Z,1520529657.086 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T17:20:57.086Z,1520529657.086 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 192
2018-03-08T17:20:57.461Z,1520529657.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:57.483Z,1520529657.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T17:20:57.483Z,1520529657.483 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:20:57.483Z,1520529657.483 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:20:57.484Z,1520529657.484 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T17:20:57.484Z,1520529657.484 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:20:57.485Z,1520529657.485 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:20:57.485Z,1520529657.485 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T17:20:57.485Z,1520529657.485 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:20:57.486Z,1520529657.486 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:20:57.857Z,1520529657.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:57.890Z,1520529657.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T17:20:57.891Z,1520529657.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:58.265Z,1520529658.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:58.280Z,1520529658.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T17:20:58.281Z,1520529658.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:58.643Z,1520529658.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:58.678Z,1520529658.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T17:20:58.679Z,1520529658.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:59.043Z,1520529659.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:59.081Z,1520529659.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T17:20:59.082Z,1520529659.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:59.447Z,1520529659.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:59.486Z,1520529659.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T17:20:59.487Z,1520529659.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:20:59.843Z,1520529659.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:20:59.874Z,1520529659.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T17:20:59.875Z,1520529659.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:00.257Z,1520529660.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:00.283Z,1520529660.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T17:21:00.284Z,1520529660.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:00.653Z,1520529660.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:00.679Z,1520529660.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T17:21:00.680Z,1520529660.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:01.053Z,1520529661.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:01.079Z,1520529661.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T17:21:01.080Z,1520529661.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:01.443Z,1520529661.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:01.483Z,1520529661.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T17:21:01.484Z,1520529661.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:01.840Z,1520529661.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:01.855Z,1520529661.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T17:21:01.856Z,1520529661.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:02.247Z,1520529662.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:02.262Z,1520529662.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T17:21:02.263Z,1520529662.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:02.651Z,1520529662.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:02.666Z,1520529662.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T17:21:02.667Z,1520529662.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:03.044Z,1520529663.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:03.059Z,1520529663.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T17:21:03.060Z,1520529663.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:03.465Z,1520529663.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:03.494Z,1520529663.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T17:21:03.495Z,1520529663.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:03.861Z,1520529663.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:03.885Z,1520529663.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T17:21:03.886Z,1520529663.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:04.265Z,1520529664.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:04.294Z,1520529664.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T17:21:04.295Z,1520529664.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:04.648Z,1520529664.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:04.663Z,1520529664.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T17:21:04.664Z,1520529664.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:05.051Z,1520529665.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:05.065Z,1520529665.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T17:21:05.066Z,1520529665.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:05.444Z,1520529665.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:05.459Z,1520529665.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T17:21:05.460Z,1520529665.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:05.851Z,1520529665.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:05.886Z,1520529665.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T17:21:05.887Z,1520529665.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:06.266Z,1520529666.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:06.290Z,1520529666.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T17:21:06.291Z,1520529666.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:06.657Z,1520529666.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:06.672Z,1520529666.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T17:21:06.689Z,1520529666.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:07.065Z,1520529667.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:07.095Z,1520529667.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T17:21:07.096Z,1520529667.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:07.450Z,1520529667.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:07.474Z,1520529667.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T17:21:07.475Z,1520529667.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:07.844Z,1520529667.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:07.874Z,1520529667.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T17:21:07.875Z,1520529667.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:08.255Z,1520529668.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:08.270Z,1520529668.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T17:21:08.271Z,1520529668.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:08.653Z,1520529668.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:08.667Z,1520529668.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T17:21:08.668Z,1520529668.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:09.047Z,1520529669.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:09.074Z,1520529669.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T17:21:09.075Z,1520529669.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:09.460Z,1520529669.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:09.475Z,1520529669.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T17:21:09.476Z,1520529669.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:09.861Z,1520529669.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:09.882Z,1520529669.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T17:21:09.883Z,1520529669.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:10.260Z,1520529670.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:10.275Z,1520529670.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T17:21:10.276Z,1520529670.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:10.651Z,1520529670.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:10.670Z,1520529670.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T17:21:10.671Z,1520529670.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:11.050Z,1520529671.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:11.071Z,1520529671.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T17:21:11.072Z,1520529671.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:11.449Z,1520529671.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:11.469Z,1520529671.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T17:21:11.470Z,1520529671.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:11.851Z,1520529671.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:11.866Z,1520529671.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T17:21:11.867Z,1520529671.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:12.261Z,1520529672.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:12.275Z,1520529672.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T17:21:12.277Z,1520529672.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:12.661Z,1520529672.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:12.684Z,1520529672.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T17:21:12.689Z,1520529672.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:13.065Z,1520529673.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:13.080Z,1520529673.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T17:21:13.081Z,1520529673.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:13.443Z,1520529673.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:13.475Z,1520529673.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T17:21:13.475Z,1520529673.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:13.847Z,1520529673.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:13.873Z,1520529673.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T17:21:13.874Z,1520529673.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:14.243Z,1520529674.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:14.268Z,1520529674.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T17:21:14.269Z,1520529674.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:14.644Z,1520529674.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:14.682Z,1520529674.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T17:21:14.683Z,1520529674.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:15.047Z,1520529675.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:15.073Z,1520529675.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T17:21:15.074Z,1520529675.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:15.461Z,1520529675.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:15.476Z,1520529675.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T17:21:15.477Z,1520529675.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:15.866Z,1520529675.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:15.886Z,1520529675.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T17:21:15.887Z,1520529675.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:16.249Z,1520529676.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:16.286Z,1520529676.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T17:21:16.287Z,1520529676.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:16.647Z,1520529676.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:16.673Z,1520529676.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T17:21:16.674Z,1520529676.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:17.043Z,1520529677.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:17.078Z,1520529677.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:17.448Z,1520529677.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:17.478Z,1520529677.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:17.843Z,1520529677.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:17.875Z,1520529677.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:18.270Z,1520529678.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:18.286Z,1520529678.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:18.657Z,1520529678.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:18.678Z,1520529678.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:19.061Z,1520529679.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:19.084Z,1520529679.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:19.447Z,1520529679.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:19.463Z,1520529679.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:19.851Z,1520529679.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:19.867Z,1520529679.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:20.250Z,1520529680.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:20.265Z,1520529680.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:20.653Z,1520529680.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:20.668Z,1520529680.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:21.082Z,1520529681.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:21.102Z,1520529681.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:21.457Z,1520529681.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:21.473Z,1520529681.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:21.865Z,1520529681.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:21.897Z,1520529681.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:22.250Z,1520529682.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:22.265Z,1520529682.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:22.655Z,1520529682.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:22.675Z,1520529682.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:23.053Z,1520529683.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:23.068Z,1520529683.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:23.454Z,1520529683.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:23.470Z,1520529683.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:23.852Z,1520529683.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:23.867Z,1520529683.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:24.262Z,1520529684.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:24.293Z,1520529684.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:24.667Z,1520529684.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:24.698Z,1520529684.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:25.058Z,1520529685.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:25.073Z,1520529685.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:25.455Z,1520529685.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:25.471Z,1520529685.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:25.855Z,1520529685.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:25.871Z,1520529685.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:26.255Z,1520529686.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:26.271Z,1520529686.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:26.648Z,1520529686.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:26.664Z,1520529686.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:27.043Z,1520529687.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:27.079Z,1520529687.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:27.464Z,1520529687.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:27.479Z,1520529687.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:30.563Z,1520529690.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:30.578Z,1520529690.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:30.681Z,1520529690.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:30.713Z,1520529690.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:31.075Z,1520529691.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:31.094Z,1520529691.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:31.472Z,1520529691.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:31.488Z,1520529691.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:31.872Z,1520529691.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:31.887Z,1520529691.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:32.285Z,1520529692.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:32.321Z,1520529692.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:32.685Z,1520529692.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:32.700Z,1520529692.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:33.073Z,1520529693.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:33.089Z,1520529693.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:33.472Z,1520529693.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:33.487Z,1520529693.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:33.867Z,1520529693.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:33.882Z,1520529693.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:34.273Z,1520529694.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:34.288Z,1520529694.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:34.672Z,1520529694.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:34.687Z,1520529694.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:35.072Z,1520529695.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:35.087Z,1520529695.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:35.485Z,1520529695.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:35.517Z,1520529695.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:35.881Z,1520529695.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:35.896Z,1520529695.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:36.277Z,1520529696.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:36.292Z,1520529696.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:36.675Z,1520529696.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:36.690Z,1520529696.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:37.075Z,1520529697.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:37.090Z,1520529697.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:37.475Z,1520529697.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:37.490Z,1520529697.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:37.875Z,1520529697.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:37.890Z,1520529697.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:38.276Z,1520529698.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:38.298Z,1520529698.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:38.681Z,1520529698.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:38.696Z,1520529698.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:39.078Z,1520529699.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:39.094Z,1520529699.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:39.475Z,1520529699.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:39.491Z,1520529699.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:39.875Z,1520529699.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:39.890Z,1520529699.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:40.275Z,1520529700.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:40.290Z,1520529700.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:40.667Z,1520529700.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:40.689Z,1520529700.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:41.074Z,1520529701.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:41.090Z,1520529701.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:41.477Z,1520529701.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:41.493Z,1520529701.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:41.881Z,1520529701.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:41.896Z,1520529701.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:42.277Z,1520529702.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:42.298Z,1520529702.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:42.675Z,1520529702.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:42.690Z,1520529702.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:43.071Z,1520529703.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:43.086Z,1520529703.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:43.475Z,1520529703.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:43.490Z,1520529703.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:43.876Z,1520529703.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:43.891Z,1520529703.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:44.276Z,1520529704.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:44.298Z,1520529704.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:44.681Z,1520529704.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:44.696Z,1520529704.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:45.077Z,1520529705.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:45.093Z,1520529705.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:45.471Z,1520529705.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:45.486Z,1520529705.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:45.874Z,1520529705.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:45.890Z,1520529705.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:46.275Z,1520529706.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:46.290Z,1520529706.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:46.675Z,1520529706.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:46.691Z,1520529706.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:47.074Z,1520529707.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:47.089Z,1520529707.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:47.477Z,1520529707.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:47.493Z,1520529707.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:47.877Z,1520529707.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:47.892Z,1520529707.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:48.277Z,1520529708.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:48.298Z,1520529708.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:48.674Z,1520529708.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:48.689Z,1520529708.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:49.071Z,1520529709.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:49.086Z,1520529709.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:49.472Z,1520529709.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:49.487Z,1520529709.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:49.875Z,1520529709.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:49.890Z,1520529709.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:50.276Z,1520529710.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:50.298Z,1520529710.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:50.682Z,1520529710.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:50.697Z,1520529710.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:51.077Z,1520529711.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:51.093Z,1520529711.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:51.475Z,1520529711.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:51.490Z,1520529711.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:51.874Z,1520529711.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:51.889Z,1520529711.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:52.275Z,1520529712.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:52.290Z,1520529712.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:52.671Z,1520529712.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:52.686Z,1520529712.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:53.067Z,1520529713.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:53.082Z,1520529713.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:53.478Z,1520529713.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:53.494Z,1520529713.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:53.881Z,1520529713.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:53.896Z,1520529713.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:54.277Z,1520529714.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:54.298Z,1520529714.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:54.674Z,1520529714.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:54.689Z,1520529714.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:55.071Z,1520529715.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:55.086Z,1520529715.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:55.475Z,1520529715.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:55.491Z,1520529715.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:55.875Z,1520529715.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:55.890Z,1520529715.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:55.903Z,1520529715.903 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T17:21:56.277Z,1520529716.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:56.293Z,1520529716.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:56.681Z,1520529716.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:56.696Z,1520529716.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:57.077Z,1520529717.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:57.093Z,1520529717.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:57.471Z,1520529717.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:57.486Z,1520529717.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:57.874Z,1520529717.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:57.889Z,1520529717.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:58.275Z,1520529718.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:58.298Z,1520529718.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:58.675Z,1520529718.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:58.691Z,1520529718.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:59.075Z,1520529719.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:59.090Z,1520529719.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:59.478Z,1520529719.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:59.493Z,1520529719.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:21:59.881Z,1520529719.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:21:59.897Z,1520529719.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:00.278Z,1520529720.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:00.293Z,1520529720.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:00.674Z,1520529720.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:00.695Z,1520529720.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:01.075Z,1520529721.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:01.091Z,1520529721.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:01.469Z,1520529721.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:01.484Z,1520529721.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:01.875Z,1520529721.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:01.891Z,1520529721.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:02.277Z,1520529722.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:02.294Z,1520529722.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:02.678Z,1520529722.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:02.698Z,1520529722.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:03.077Z,1520529723.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:03.093Z,1520529723.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:03.472Z,1520529723.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:03.487Z,1520529723.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:03.877Z,1520529723.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:03.892Z,1520529723.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:04.273Z,1520529724.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:04.288Z,1520529724.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:04.677Z,1520529724.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:04.692Z,1520529724.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:05.077Z,1520529725.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:05.092Z,1520529725.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:05.474Z,1520529725.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:05.503Z,1520529725.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:05.882Z,1520529725.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:05.897Z,1520529725.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:06.282Z,1520529726.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:06.297Z,1520529726.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:06.664Z,1520529726.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:06.692Z,1520529726.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:07.076Z,1520529727.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:07.093Z,1520529727.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:07.459Z,1520529727.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:07.493Z,1520529727.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:07.876Z,1520529727.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:07.891Z,1520529727.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:08.281Z,1520529728.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:08.297Z,1520529728.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:08.682Z,1520529728.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:08.703Z,1520529728.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:09.078Z,1520529729.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:09.100Z,1520529729.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:09.475Z,1520529729.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:09.491Z,1520529729.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:09.864Z,1520529729.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:09.890Z,1520529729.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:10.259Z,1520529730.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:10.285Z,1520529730.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:10.662Z,1520529730.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:10.689Z,1520529730.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:11.063Z,1520529731.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:11.097Z,1520529731.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:11.481Z,1520529731.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:11.497Z,1520529731.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:11.889Z,1520529731.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:11.904Z,1520529731.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:12.285Z,1520529732.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:12.300Z,1520529732.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:12.660Z,1520529732.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:12.692Z,1520529732.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:13.067Z,1520529733.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:13.093Z,1520529733.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:13.459Z,1520529733.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:13.494Z,1520529733.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:13.867Z,1520529733.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:13.894Z,1520529733.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:14.281Z,1520529734.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:14.297Z,1520529734.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:14.686Z,1520529734.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:14.706Z,1520529734.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:15.069Z,1520529735.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:15.104Z,1520529735.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:15.467Z,1520529735.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:15.493Z,1520529735.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:15.863Z,1520529735.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:15.894Z,1520529735.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:16.267Z,1520529736.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:16.293Z,1520529736.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:16.663Z,1520529736.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:16.695Z,1520529736.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:17.059Z,1520529737.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:17.094Z,1520529737.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:17.469Z,1520529737.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:17.504Z,1520529737.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:17.889Z,1520529737.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:17.905Z,1520529737.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:18.289Z,1520529738.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:18.304Z,1520529738.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:18.660Z,1520529738.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:18.688Z,1520529738.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:19.063Z,1520529739.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:19.098Z,1520529739.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:19.464Z,1520529739.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:19.501Z,1520529739.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:19.867Z,1520529739.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:19.898Z,1520529739.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:20.273Z,1520529740.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:20.309Z,1520529740.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:20.690Z,1520529740.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:20.705Z,1520529740.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:21.073Z,1520529741.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:21.111Z,1520529741.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:21.471Z,1520529741.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:21.505Z,1520529741.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:21.871Z,1520529741.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:21.908Z,1520529741.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:22.264Z,1520529742.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:22.279Z,1520529742.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:22.672Z,1520529742.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:22.707Z,1520529742.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:23.067Z,1520529743.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:23.082Z,1520529743.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:23.473Z,1520529743.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:23.505Z,1520529743.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:23.877Z,1520529743.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:23.908Z,1520529743.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:24.281Z,1520529744.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:24.314Z,1520529744.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:24.663Z,1520529744.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:24.679Z,1520529744.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:25.071Z,1520529745.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:25.090Z,1520529745.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:25.472Z,1520529745.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:25.487Z,1520529745.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:25.872Z,1520529745.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:25.887Z,1520529745.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:26.282Z,1520529746.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:26.313Z,1520529746.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:26.672Z,1520529746.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:26.694Z,1520529746.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:27.070Z,1520529747.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:27.085Z,1520529747.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:27.471Z,1520529747.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:27.486Z,1520529747.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:30.569Z,1520529750.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:30.587Z,1520529750.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:30.685Z,1520529750.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:30.722Z,1520529750.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:31.089Z,1520529751.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:31.114Z,1520529751.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:31.485Z,1520529751.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:31.518Z,1520529751.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:31.885Z,1520529751.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:31.917Z,1520529751.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:32.278Z,1520529752.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:32.315Z,1520529752.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:32.676Z,1520529752.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:32.691Z,1520529752.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:33.063Z,1520529753.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:33.095Z,1520529753.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:33.489Z,1520529753.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:33.521Z,1520529753.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:33.885Z,1520529753.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:33.900Z,1520529753.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:34.280Z,1520529754.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:34.302Z,1520529754.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:34.678Z,1520529754.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:34.693Z,1520529754.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:35.077Z,1520529755.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:35.093Z,1520529755.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:35.471Z,1520529755.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:35.491Z,1520529755.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:35.878Z,1520529755.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:35.893Z,1520529755.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:36.280Z,1520529756.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:36.295Z,1520529756.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:36.680Z,1520529756.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:36.695Z,1520529756.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:37.085Z,1520529757.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:37.101Z,1520529757.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:37.479Z,1520529757.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:37.494Z,1520529757.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:37.879Z,1520529757.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:37.894Z,1520529757.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:38.279Z,1520529758.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:38.294Z,1520529758.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:38.673Z,1520529758.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:38.694Z,1520529758.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:39.072Z,1520529759.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:39.088Z,1520529759.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:39.480Z,1520529759.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:39.496Z,1520529759.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:39.885Z,1520529759.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:39.901Z,1520529759.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:40.285Z,1520529760.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:40.301Z,1520529760.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:40.680Z,1520529760.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:40.695Z,1520529760.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:41.080Z,1520529761.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:41.095Z,1520529761.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:41.480Z,1520529761.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:41.495Z,1520529761.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:41.879Z,1520529761.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:41.894Z,1520529761.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:42.285Z,1520529762.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:42.300Z,1520529762.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:42.687Z,1520529762.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:42.703Z,1520529762.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:43.085Z,1520529763.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:43.100Z,1520529763.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:43.473Z,1520529763.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:43.494Z,1520529763.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:43.881Z,1520529763.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:43.896Z,1520529763.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:44.276Z,1520529764.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:44.291Z,1520529764.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:44.677Z,1520529764.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:44.694Z,1520529764.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:45.068Z,1520529765.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:45.100Z,1520529765.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:45.486Z,1520529765.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:45.501Z,1520529765.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:45.885Z,1520529765.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:45.900Z,1520529765.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:46.286Z,1520529766.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:46.301Z,1520529766.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:46.679Z,1520529766.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:46.695Z,1520529766.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:47.081Z,1520529767.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:47.096Z,1520529767.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:47.483Z,1520529767.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:47.499Z,1520529767.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:47.879Z,1520529767.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:47.895Z,1520529767.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:48.285Z,1520529768.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:48.300Z,1520529768.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:48.685Z,1520529768.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:48.707Z,1520529768.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:49.086Z,1520529769.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:49.101Z,1520529769.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:49.480Z,1520529769.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:49.496Z,1520529769.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:49.879Z,1520529769.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:49.895Z,1520529769.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:50.279Z,1520529770.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:50.299Z,1520529770.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:50.680Z,1520529770.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:50.695Z,1520529770.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:51.073Z,1520529771.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:51.088Z,1520529771.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:51.484Z,1520529771.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:51.499Z,1520529771.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:51.885Z,1520529771.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:51.900Z,1520529771.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:52.285Z,1520529772.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:52.301Z,1520529772.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:52.679Z,1520529772.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:52.694Z,1520529772.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:53.076Z,1520529773.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:53.091Z,1520529773.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:53.472Z,1520529773.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:53.494Z,1520529773.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:53.873Z,1520529773.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:53.893Z,1520529773.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:54.285Z,1520529774.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:54.306Z,1520529774.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:54.681Z,1520529774.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:54.696Z,1520529774.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:55.084Z,1520529775.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:55.099Z,1520529775.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:55.476Z,1520529775.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:55.490Z,1520529775.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:55.868Z,1520529775.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:55.899Z,1520529775.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:56.275Z,1520529776.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:56.290Z,1520529776.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:56.680Z,1520529776.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:56.695Z,1520529776.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:57.068Z,1520529777.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:57.092Z,1520529777.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:57.484Z,1520529777.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:57.506Z,1520529777.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:57.884Z,1520529777.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:57.899Z,1520529777.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:58.285Z,1520529778.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:58.301Z,1520529778.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:58.679Z,1520529778.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:58.694Z,1520529778.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:59.082Z,1520529779.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:59.130Z,1520529779.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:59.479Z,1520529779.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:59.496Z,1520529779.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:22:59.879Z,1520529779.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:22:59.894Z,1520529779.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:00.285Z,1520529780.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:00.300Z,1520529780.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:00.685Z,1520529780.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:00.700Z,1520529780.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:01.085Z,1520529781.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:01.100Z,1520529781.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:01.463Z,1520529781.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:01.489Z,1520529781.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:01.881Z,1520529781.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:01.896Z,1520529781.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:02.275Z,1520529782.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:02.294Z,1520529782.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:02.663Z,1520529782.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:02.694Z,1520529782.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:03.060Z,1520529783.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:03.095Z,1520529783.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:03.485Z,1520529783.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:03.500Z,1520529783.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:03.889Z,1520529783.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:03.904Z,1520529783.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:04.288Z,1520529784.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:04.303Z,1520529784.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:04.679Z,1520529784.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:04.694Z,1520529784.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:05.063Z,1520529785.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:05.089Z,1520529785.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:05.480Z,1520529785.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:05.496Z,1520529785.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:05.873Z,1520529785.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:05.894Z,1520529785.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:06.288Z,1520529786.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:06.304Z,1520529786.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:06.684Z,1520529786.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:06.700Z,1520529786.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:07.088Z,1520529787.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:07.110Z,1520529787.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:07.480Z,1520529787.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:07.495Z,1520529787.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:07.880Z,1520529787.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:07.902Z,1520529787.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:08.279Z,1520529788.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:08.298Z,1520529788.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:08.675Z,1520529788.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:08.704Z,1520529788.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:09.064Z,1520529789.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:09.091Z,1520529789.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:09.492Z,1520529789.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:09.508Z,1520529789.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:09.893Z,1520529789.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:09.914Z,1520529789.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:10.285Z,1520529790.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:10.301Z,1520529790.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:10.667Z,1520529790.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:10.703Z,1520529790.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:11.080Z,1520529791.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:11.096Z,1520529791.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:11.462Z,1520529791.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:11.478Z,1520529791.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:11.867Z,1520529791.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:11.882Z,1520529791.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:12.281Z,1520529792.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:12.297Z,1520529792.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:12.681Z,1520529792.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:12.696Z,1520529792.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:13.081Z,1520529793.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:13.097Z,1520529793.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:13.504Z,1520529793.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:13.519Z,1520529793.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:13.871Z,1520529793.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:13.887Z,1520529793.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:14.268Z,1520529794.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:14.284Z,1520529794.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:14.668Z,1520529794.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:14.683Z,1520529794.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:15.071Z,1520529795.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:15.090Z,1520529795.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:15.490Z,1520529795.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:15.511Z,1520529795.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:15.881Z,1520529795.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:15.897Z,1520529795.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:16.274Z,1520529796.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:16.300Z,1520529796.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:16.667Z,1520529796.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:16.695Z,1520529796.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:17.084Z,1520529797.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:17.099Z,1520529797.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:17.480Z,1520529797.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:17.502Z,1520529797.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:17.879Z,1520529797.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:17.899Z,1520529797.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:18.285Z,1520529798.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:18.301Z,1520529798.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:18.684Z,1520529798.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:18.699Z,1520529798.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:19.085Z,1520529799.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:19.101Z,1520529799.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:19.481Z,1520529799.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:19.496Z,1520529799.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:19.879Z,1520529799.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:19.894Z,1520529799.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:20.273Z,1520529800.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:20.295Z,1520529800.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:20.675Z,1520529800.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:20.696Z,1520529800.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:21.080Z,1520529801.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:21.095Z,1520529801.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:21.485Z,1520529801.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:21.500Z,1520529801.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:21.893Z,1520529801.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:21.909Z,1520529801.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:22.289Z,1520529802.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:22.305Z,1520529802.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:22.677Z,1520529802.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:22.693Z,1520529802.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:23.080Z,1520529803.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:23.096Z,1520529803.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:23.473Z,1520529803.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:23.494Z,1520529803.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:23.867Z,1520529803.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:23.895Z,1520529803.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:24.294Z,1520529804.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:24.310Z,1520529804.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:24.692Z,1520529804.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:24.714Z,1520529804.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:25.094Z,1520529805.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:25.115Z,1520529805.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:25.468Z,1520529805.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:25.496Z,1520529805.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:25.863Z,1520529805.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:25.899Z,1520529805.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:26.278Z,1520529806.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:26.299Z,1520529806.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:26.664Z,1520529806.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:26.700Z,1520529806.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:27.081Z,1520529807.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:27.097Z,1520529807.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:27.100Z,1520529807.100 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T17:18:27.0Z
2018-03-08T17:23:27.100Z,1520529807.100 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T17:23:27.100Z,1520529807.100 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T17:23:27.481Z,1520529807.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:27.509Z,1520529807.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:30.682Z,1520529810.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:30.703Z,1520529810.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:30.806Z,1520529810.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:30.850Z,1520529810.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:31.133Z,1520529811.133 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0224.lzma
2018-03-08T17:23:31.168Z,1520529811.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:31.196Z,1520529811.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:31.561Z,1520529811.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:31.577Z,1520529811.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:31.927Z,1520529811.927 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0224.lzma.bak
2018-03-08T17:23:31.927Z,1520529811.927 [DataOverHttps](INFO): SBD MOMSN=7987636
2018-03-08T17:23:31.966Z,1520529811.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:31.982Z,1520529811.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:32.562Z,1520529812.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:32.581Z,1520529812.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:32.769Z,1520529812.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:32.785Z,1520529812.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:35.933Z,1520529815.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:35.958Z,1520529815.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:36.059Z,1520529816.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:36.102Z,1520529816.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:36.418Z,1520529816.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:36.434Z,1520529816.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:36.812Z,1520529816.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:36.827Z,1520529816.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:37.213Z,1520529817.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:37.230Z,1520529817.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:37.625Z,1520529817.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:37.661Z,1520529817.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:38.025Z,1520529818.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:38.040Z,1520529818.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:41.112Z,1520529821.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:41.128Z,1520529821.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:41.231Z,1520529821.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:41.274Z,1520529821.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:41.560Z,1520529821.560 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0225.lzma
2018-03-08T17:23:41.597Z,1520529821.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:41.635Z,1520529821.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:41.997Z,1520529821.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:42.021Z,1520529822.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:42.358Z,1520529822.358 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0225.lzma.bak
2018-03-08T17:23:42.359Z,1520529822.359 [DataOverHttps](INFO): SBD MOMSN=7987638
2018-03-08T17:23:42.393Z,1520529822.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:42.425Z,1520529822.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:42.970Z,1520529822.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:42.990Z,1520529822.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:42.994Z,1520529822.994 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T17:23:42.994Z,1520529822.994 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T17:23:42.994Z,1520529822.994 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T17:23:43.182Z,1520529823.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:43.197Z,1520529823.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:46.488Z,1520529826.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:46.503Z,1520529826.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:46.612Z,1520529826.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:46.639Z,1520529826.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:46.999Z,1520529826.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:47.027Z,1520529827.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:47.393Z,1520529827.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:47.420Z,1520529827.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:47.799Z,1520529827.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:47.831Z,1520529827.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:48.190Z,1520529828.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:48.235Z,1520529828.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:48.591Z,1520529828.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:48.606Z,1520529828.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:48.991Z,1520529828.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:49.007Z,1520529829.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:49.389Z,1520529829.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:49.429Z,1520529829.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:49.796Z,1520529829.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:49.838Z,1520529829.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:50.192Z,1520529830.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:50.208Z,1520529830.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:50.591Z,1520529830.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:50.607Z,1520529830.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:50.989Z,1520529830.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:51.028Z,1520529831.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:51.391Z,1520529831.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:51.434Z,1520529831.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:51.788Z,1520529831.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:51.804Z,1520529831.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:52.191Z,1520529832.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:52.223Z,1520529832.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:52.594Z,1520529832.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:52.647Z,1520529832.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:52.997Z,1520529832.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:53.012Z,1520529833.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:53.393Z,1520529833.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:53.408Z,1520529833.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:53.778Z,1520529833.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:53.814Z,1520529833.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:54.198Z,1520529834.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:54.233Z,1520529834.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:54.591Z,1520529834.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:54.608Z,1520529834.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:54.998Z,1520529834.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:55.031Z,1520529835.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:55.384Z,1520529835.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:55.422Z,1520529835.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:55.789Z,1520529835.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:55.835Z,1520529835.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:56.190Z,1520529836.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:56.230Z,1520529836.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:56.598Z,1520529836.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:56.638Z,1520529836.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:56.994Z,1520529836.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:57.009Z,1520529837.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:57.394Z,1520529837.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:57.414Z,1520529837.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:57.787Z,1520529837.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:57.806Z,1520529837.806 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:57.806Z,1520529837.806 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 193
2018-03-08T17:23:57.806Z,1520529837.806 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T17:23:57.808Z,1520529837.808 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:57.808Z,1520529837.808 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 193
2018-03-08T17:23:57.809Z,1520529837.809 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T17:23:57.810Z,1520529837.810 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:57.810Z,1520529837.810 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 193
2018-03-08T17:23:57.810Z,1520529837.810 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T17:23:57.843Z,1520529837.843 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T17:23:57.843Z,1520529837.843 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T17:23:57.843Z,1520529837.843 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T17:23:58.171Z,1520529838.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:58.215Z,1520529838.215 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T17:23:58.215Z,1520529838.215 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 193
2018-03-08T17:23:58.215Z,1520529838.215 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T17:23:58.215Z,1520529838.215 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 193
2018-03-08T17:23:58.216Z,1520529838.216 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T17:23:58.216Z,1520529838.216 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 193
2018-03-08T17:23:58.578Z,1520529838.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:58.605Z,1520529838.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T17:23:58.605Z,1520529838.605 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:23:58.605Z,1520529838.605 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:23:58.606Z,1520529838.606 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T17:23:58.606Z,1520529838.606 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:23:58.607Z,1520529838.607 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:23:58.607Z,1520529838.607 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T17:23:58.607Z,1520529838.607 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:23:58.608Z,1520529838.608 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:23:58.975Z,1520529838.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:59.017Z,1520529839.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T17:23:59.018Z,1520529839.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:59.405Z,1520529839.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:59.421Z,1520529839.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T17:23:59.422Z,1520529839.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:23:59.804Z,1520529839.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:23:59.826Z,1520529839.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T17:23:59.827Z,1520529839.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:00.198Z,1520529840.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:00.219Z,1520529840.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T17:24:00.220Z,1520529840.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:00.571Z,1520529840.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:00.603Z,1520529840.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T17:24:00.605Z,1520529840.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:00.971Z,1520529840.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:00.999Z,1520529840.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T17:24:01.000Z,1520529841.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:01.382Z,1520529841.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:01.414Z,1520529841.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T17:24:01.415Z,1520529841.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:01.773Z,1520529841.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:01.810Z,1520529841.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T17:24:01.811Z,1520529841.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:02.198Z,1520529842.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:02.216Z,1520529842.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T17:24:02.217Z,1520529842.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:02.600Z,1520529842.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:02.619Z,1520529842.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T17:24:02.620Z,1520529842.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:03.000Z,1520529843.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:03.015Z,1520529843.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T17:24:03.016Z,1520529843.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:03.383Z,1520529843.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:03.410Z,1520529843.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T17:24:03.411Z,1520529843.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:03.775Z,1520529843.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:03.817Z,1520529843.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T17:24:03.818Z,1520529843.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:04.210Z,1520529844.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:04.230Z,1520529844.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T17:24:04.231Z,1520529844.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:04.603Z,1520529844.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:04.626Z,1520529844.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T17:24:04.627Z,1520529844.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:04.986Z,1520529844.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:05.022Z,1520529845.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T17:24:05.023Z,1520529845.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:05.379Z,1520529845.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:05.411Z,1520529845.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T17:24:05.412Z,1520529845.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:05.779Z,1520529845.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:05.810Z,1520529845.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T17:24:05.811Z,1520529845.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:06.188Z,1520529846.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:06.221Z,1520529846.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T17:24:06.222Z,1520529846.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:06.598Z,1520529846.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:06.613Z,1520529846.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T17:24:06.614Z,1520529846.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:07.001Z,1520529847.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:07.017Z,1520529847.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T17:24:07.018Z,1520529847.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:07.375Z,1520529847.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:07.416Z,1520529847.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T17:24:07.417Z,1520529847.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:07.781Z,1520529847.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:07.809Z,1520529847.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T17:24:07.810Z,1520529847.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:08.200Z,1520529848.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:08.222Z,1520529848.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T17:24:08.223Z,1520529848.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:08.598Z,1520529848.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:08.620Z,1520529848.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T17:24:08.621Z,1520529848.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:08.997Z,1520529848.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:09.027Z,1520529849.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T17:24:09.028Z,1520529849.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:09.381Z,1520529849.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:09.409Z,1520529849.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T17:24:09.410Z,1520529849.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:09.779Z,1520529849.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:09.810Z,1520529849.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T17:24:09.811Z,1520529849.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:10.179Z,1520529850.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:10.216Z,1520529850.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T17:24:10.217Z,1520529850.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:10.591Z,1520529850.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:10.619Z,1520529850.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T17:24:10.620Z,1520529850.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:10.991Z,1520529850.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:11.027Z,1520529851.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T17:24:11.027Z,1520529851.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:11.390Z,1520529851.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:11.416Z,1520529851.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T17:24:11.417Z,1520529851.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:11.779Z,1520529851.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:11.822Z,1520529851.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T17:24:11.823Z,1520529851.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:12.182Z,1520529852.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:12.223Z,1520529852.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T17:24:12.224Z,1520529852.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:12.586Z,1520529852.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:12.617Z,1520529852.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T17:24:12.617Z,1520529852.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:12.980Z,1520529852.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:12.995Z,1520529852.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T17:24:12.996Z,1520529852.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:13.399Z,1520529853.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:13.425Z,1520529853.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T17:24:13.426Z,1520529853.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:13.800Z,1520529853.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:13.823Z,1520529853.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T17:24:13.824Z,1520529853.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:14.198Z,1520529854.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:14.226Z,1520529854.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T17:24:14.227Z,1520529854.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:14.583Z,1520529854.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:14.598Z,1520529854.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T17:24:14.599Z,1520529854.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:14.983Z,1520529854.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:15.021Z,1520529855.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T17:24:15.022Z,1520529855.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:15.381Z,1520529855.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:15.400Z,1520529855.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T17:24:15.401Z,1520529855.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:15.787Z,1520529855.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:15.826Z,1520529855.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T17:24:15.827Z,1520529855.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:16.201Z,1520529856.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:16.230Z,1520529856.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T17:24:16.231Z,1520529856.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:16.589Z,1520529856.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:16.629Z,1520529856.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T17:24:16.630Z,1520529856.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:16.991Z,1520529856.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:17.030Z,1520529857.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T17:24:17.031Z,1520529857.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:17.381Z,1520529857.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:17.406Z,1520529857.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T17:24:17.407Z,1520529857.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:17.791Z,1520529857.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:17.806Z,1520529857.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T17:24:17.807Z,1520529857.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:18.187Z,1520529858.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:18.230Z,1520529858.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:18.593Z,1520529858.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:18.625Z,1520529858.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:18.995Z,1520529858.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:19.011Z,1520529859.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:19.393Z,1520529859.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:19.409Z,1520529859.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:19.788Z,1520529859.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:19.815Z,1520529859.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:20.186Z,1520529860.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:20.234Z,1520529860.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:20.590Z,1520529860.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:20.610Z,1520529860.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:20.992Z,1520529860.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:21.007Z,1520529861.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:21.392Z,1520529861.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:21.438Z,1520529861.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:21.796Z,1520529861.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:21.838Z,1520529861.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:22.198Z,1520529862.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:22.218Z,1520529862.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:22.590Z,1520529862.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:22.606Z,1520529862.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:22.987Z,1520529862.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:23.034Z,1520529863.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:23.380Z,1520529863.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:23.411Z,1520529863.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:23.792Z,1520529863.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:23.831Z,1520529863.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:24.182Z,1520529864.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:24.205Z,1520529864.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:24.594Z,1520529864.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:24.613Z,1520529864.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:24.995Z,1520529864.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:25.010Z,1520529865.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:25.397Z,1520529865.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:25.412Z,1520529865.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:25.794Z,1520529865.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:25.813Z,1520529865.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:26.185Z,1520529866.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:26.218Z,1520529866.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:26.591Z,1520529866.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:26.608Z,1520529866.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:26.985Z,1520529866.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:27.000Z,1520529867.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:27.397Z,1520529867.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:27.413Z,1520529867.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:27.793Z,1520529867.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:27.838Z,1520529867.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:28.197Z,1520529868.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:28.232Z,1520529868.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:28.591Z,1520529868.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:28.607Z,1520529868.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:28.987Z,1520529868.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:29.006Z,1520529869.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:29.379Z,1520529869.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:29.407Z,1520529869.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:29.792Z,1520529869.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:29.809Z,1520529869.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:30.192Z,1520529870.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:30.207Z,1520529870.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:30.599Z,1520529870.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:30.614Z,1520529870.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:30.995Z,1520529870.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:31.014Z,1520529871.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:31.395Z,1520529871.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:31.415Z,1520529871.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:31.795Z,1520529871.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:31.810Z,1520529871.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:32.178Z,1520529872.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:32.202Z,1520529872.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:32.589Z,1520529872.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:32.626Z,1520529872.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:32.995Z,1520529872.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:33.023Z,1520529873.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:33.388Z,1520529873.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:33.415Z,1520529873.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:33.802Z,1520529873.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:33.822Z,1520529873.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:34.206Z,1520529874.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:34.221Z,1520529874.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:34.572Z,1520529874.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:34.614Z,1520529874.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:34.975Z,1520529874.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:35.006Z,1520529875.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:35.378Z,1520529875.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:35.404Z,1520529875.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:35.779Z,1520529875.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:35.831Z,1520529875.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:36.194Z,1520529876.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:36.227Z,1520529876.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:36.593Z,1520529876.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:36.619Z,1520529876.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:36.992Z,1520529876.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:37.015Z,1520529877.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:37.375Z,1520529877.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:37.414Z,1520529877.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:37.775Z,1520529877.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:37.814Z,1520529877.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:38.172Z,1520529878.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:38.219Z,1520529878.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:38.603Z,1520529878.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:38.619Z,1520529878.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:38.994Z,1520529878.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:39.022Z,1520529879.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:39.392Z,1520529879.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:39.423Z,1520529879.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:39.783Z,1520529879.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:39.808Z,1520529879.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:40.187Z,1520529880.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:40.223Z,1520529880.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:40.577Z,1520529880.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:40.618Z,1520529880.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:40.980Z,1520529880.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:41.000Z,1520529881.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:41.395Z,1520529881.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:41.425Z,1520529881.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:41.790Z,1520529881.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:41.825Z,1520529881.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:42.193Z,1520529882.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:42.222Z,1520529882.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:42.579Z,1520529882.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:42.618Z,1520529882.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:42.978Z,1520529882.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:43.026Z,1520529883.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:43.387Z,1520529883.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:43.423Z,1520529883.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:46.490Z,1520529886.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:46.505Z,1520529886.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:46.622Z,1520529886.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:46.641Z,1520529886.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:47.004Z,1520529887.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:47.034Z,1520529887.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:47.396Z,1520529887.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:47.424Z,1520529887.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:47.789Z,1520529887.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:47.805Z,1520529887.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:48.191Z,1520529888.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:48.206Z,1520529888.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:48.585Z,1520529888.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:48.611Z,1520529888.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:48.990Z,1520529888.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:49.008Z,1520529889.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:49.401Z,1520529889.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:49.430Z,1520529889.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:49.805Z,1520529889.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:49.829Z,1520529889.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:50.190Z,1520529890.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:50.230Z,1520529890.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:50.590Z,1520529890.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:50.634Z,1520529890.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:50.991Z,1520529890.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:51.005Z,1520529891.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:51.379Z,1520529891.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:51.406Z,1520529891.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:51.789Z,1520529891.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:51.830Z,1520529891.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:52.185Z,1520529892.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:52.215Z,1520529892.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:52.591Z,1520529892.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:52.611Z,1520529892.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:53.005Z,1520529893.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:53.036Z,1520529893.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:53.390Z,1520529893.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:53.431Z,1520529893.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:53.790Z,1520529893.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:53.838Z,1520529893.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:54.190Z,1520529894.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:54.210Z,1520529894.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:54.594Z,1520529894.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:54.608Z,1520529894.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:54.988Z,1520529894.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:55.031Z,1520529895.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:55.405Z,1520529895.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:55.438Z,1520529895.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:55.795Z,1520529895.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:55.810Z,1520529895.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:56.193Z,1520529896.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:56.218Z,1520529896.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:56.590Z,1520529896.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:56.632Z,1520529896.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:56.984Z,1520529896.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:57.015Z,1520529897.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:57.383Z,1520529897.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:57.405Z,1520529897.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:57.787Z,1520529897.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:57.809Z,1520529897.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:58.185Z,1520529898.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:58.211Z,1520529898.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:58.593Z,1520529898.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:58.615Z,1520529898.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:58.998Z,1520529898.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:59.034Z,1520529899.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:59.409Z,1520529899.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:59.436Z,1520529899.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:24:59.779Z,1520529899.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:24:59.814Z,1520529899.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:00.192Z,1520529900.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:00.214Z,1520529900.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:00.595Z,1520529900.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:00.610Z,1520529900.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:00.987Z,1520529900.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:01.006Z,1520529901.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:01.393Z,1520529901.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:01.413Z,1520529901.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:01.796Z,1520529901.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:01.811Z,1520529901.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:02.193Z,1520529902.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:02.230Z,1520529902.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:02.595Z,1520529902.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:02.611Z,1520529902.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:02.992Z,1520529902.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:03.034Z,1520529903.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:03.383Z,1520529903.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:03.429Z,1520529903.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:03.790Z,1520529903.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:03.807Z,1520529903.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:04.197Z,1520529904.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:04.213Z,1520529904.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:04.598Z,1520529904.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:04.616Z,1520529904.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:04.000Z,1520529905.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:05.015Z,1520529905.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:05.397Z,1520529905.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:05.418Z,1520529905.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:05.791Z,1520529905.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:05.806Z,1520529905.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:06.188Z,1520529906.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:06.234Z,1520529906.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:06.600Z,1520529906.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:06.638Z,1520529906.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:06.999Z,1520529906.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:07.023Z,1520529907.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:07.401Z,1520529907.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:07.416Z,1520529907.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:07.793Z,1520529907.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:07.823Z,1520529907.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:08.173Z,1520529908.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:08.222Z,1520529908.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:08.595Z,1520529908.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:08.611Z,1520529908.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:08.997Z,1520529908.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:09.011Z,1520529909.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:09.403Z,1520529909.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:09.420Z,1520529909.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:09.805Z,1520529909.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:09.821Z,1520529909.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:10.205Z,1520529910.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:10.220Z,1520529910.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:10.588Z,1520529910.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:10.616Z,1520529910.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:10.993Z,1520529910.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:11.042Z,1520529911.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:11.377Z,1520529911.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:11.422Z,1520529911.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:11.795Z,1520529911.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:11.810Z,1520529911.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:12.189Z,1520529912.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:12.210Z,1520529912.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:12.607Z,1520529912.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:12.622Z,1520529912.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:13.000Z,1520529913.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:13.029Z,1520529913.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:13.405Z,1520529913.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:13.426Z,1520529913.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:13.795Z,1520529913.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:13.810Z,1520529913.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:14.176Z,1520529914.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:14.210Z,1520529914.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:14.579Z,1520529914.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:14.616Z,1520529914.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:14.986Z,1520529914.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:15.013Z,1520529915.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:15.393Z,1520529915.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:15.419Z,1520529915.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:15.809Z,1520529915.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:15.825Z,1520529915.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:16.202Z,1520529916.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:16.217Z,1520529916.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:16.575Z,1520529916.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:16.611Z,1520529916.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:16.981Z,1520529916.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:17.007Z,1520529917.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:17.379Z,1520529917.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:17.414Z,1520529917.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:17.782Z,1520529917.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:17.814Z,1520529917.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:18.181Z,1520529918.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:18.209Z,1520529918.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:18.593Z,1520529918.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:18.619Z,1520529918.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:18.985Z,1520529918.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:19.030Z,1520529919.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:19.406Z,1520529919.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:19.438Z,1520529919.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:19.785Z,1520529919.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:19.812Z,1520529919.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:20.175Z,1520529920.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:20.199Z,1520529920.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:20.583Z,1520529920.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:20.619Z,1520529920.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:20.974Z,1520529920.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:21.017Z,1520529921.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:21.388Z,1520529921.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:21.426Z,1520529921.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:21.801Z,1520529921.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:21.817Z,1520529921.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:22.189Z,1520529922.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:22.223Z,1520529922.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:22.573Z,1520529922.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:22.620Z,1520529922.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:22.980Z,1520529922.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:23.010Z,1520529923.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:23.387Z,1520529923.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:23.419Z,1520529923.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:23.783Z,1520529923.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:23.830Z,1520529923.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:24.193Z,1520529924.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:24.231Z,1520529924.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:24.598Z,1520529924.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:24.625Z,1520529924.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:24.987Z,1520529924.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:25.022Z,1520529925.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:25.383Z,1520529925.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:25.430Z,1520529925.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:25.782Z,1520529925.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:25.828Z,1520529925.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:26.157Z,1520529926.157 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T17:25:26.157Z,1520529926.157 [NAL9602] Data Fault, FailCount= 4
2018-03-08T17:25:26.157Z,1520529926.157 [NAL9602](ERROR): Data Fault
2018-03-08T17:25:26.174Z,1520529926.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:26.195Z,1520529926.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:26.241Z,1520529926.241 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T17:25:26.571Z,1520529926.571 [NAL9602](INFO): Powering down
2018-03-08T17:25:26.590Z,1520529926.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:26.630Z,1520529926.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:26.986Z,1520529926.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:27.020Z,1520529927.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:27.379Z,1520529927.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:27.399Z,1520529927.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:27.421Z,1520529927.421 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T17:25:27.421Z,1520529927.421 [NAL9602] No Fault, FailCount= 4
2018-03-08T17:25:27.781Z,1520529927.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:27.818Z,1520529927.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:28.189Z,1520529928.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:28.203Z,1520529928.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:28.579Z,1520529928.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:28.620Z,1520529928.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:28.981Z,1520529928.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:29.001Z,1520529929.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:29.387Z,1520529929.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:29.402Z,1520529929.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:29.782Z,1520529929.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:29.798Z,1520529929.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:30.190Z,1520529930.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:30.224Z,1520529930.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:30.579Z,1520529930.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:30.607Z,1520529930.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:30.981Z,1520529930.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:31.025Z,1520529931.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:31.387Z,1520529931.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:31.402Z,1520529931.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:31.786Z,1520529931.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:31.824Z,1520529931.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:32.179Z,1520529932.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:32.199Z,1520529932.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:32.587Z,1520529932.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:32.602Z,1520529932.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:32.989Z,1520529932.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:33.032Z,1520529933.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:33.379Z,1520529933.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:33.420Z,1520529933.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:33.782Z,1520529933.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:33.802Z,1520529933.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:34.189Z,1520529934.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:34.205Z,1520529934.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:34.583Z,1520529934.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:34.598Z,1520529934.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:34.986Z,1520529934.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:35.026Z,1520529935.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:35.380Z,1520529935.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:35.400Z,1520529935.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:35.790Z,1520529935.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:35.829Z,1520529935.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:36.189Z,1520529936.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:36.203Z,1520529936.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:36.586Z,1520529936.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:36.630Z,1520529936.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:36.979Z,1520529936.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:36.999Z,1520529936.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:37.389Z,1520529937.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:37.404Z,1520529937.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:37.789Z,1520529937.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:37.804Z,1520529937.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:38.180Z,1520529938.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:38.226Z,1520529938.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:38.584Z,1520529938.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:38.604Z,1520529938.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:38.991Z,1520529938.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:39.006Z,1520529939.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:39.388Z,1520529939.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:39.403Z,1520529939.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:39.787Z,1520529939.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:39.811Z,1520529939.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:40.184Z,1520529940.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:40.204Z,1520529940.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:40.587Z,1520529940.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:40.602Z,1520529940.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:40.992Z,1520529940.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:41.007Z,1520529941.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:41.384Z,1520529941.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:41.428Z,1520529941.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:41.789Z,1520529941.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:41.807Z,1520529941.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:42.189Z,1520529942.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:42.215Z,1520529942.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:42.590Z,1520529942.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:42.610Z,1520529942.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:42.974Z,1520529942.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:43.014Z,1520529943.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:43.395Z,1520529943.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:43.410Z,1520529943.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:43.795Z,1520529943.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:43.810Z,1520529943.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:46.883Z,1520529946.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:46.900Z,1520529946.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:47.005Z,1520529947.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:47.020Z,1520529947.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:47.358Z,1520529947.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:47.402Z,1520529947.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:47.757Z,1520529947.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:47.800Z,1520529947.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:48.154Z,1520529948.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:48.170Z,1520529948.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:48.552Z,1520529948.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:48.568Z,1520529948.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:48.951Z,1520529948.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:48.971Z,1520529948.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:49.353Z,1520529949.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:49.370Z,1520529949.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:49.756Z,1520529949.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:49.772Z,1520529949.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:50.151Z,1520529950.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:50.167Z,1520529950.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:50.551Z,1520529950.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:50.570Z,1520529950.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:50.956Z,1520529950.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:50.971Z,1520529950.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:51.351Z,1520529951.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:51.365Z,1520529951.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:51.756Z,1520529951.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:51.772Z,1520529951.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:52.155Z,1520529952.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:52.176Z,1520529952.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:52.551Z,1520529952.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:52.566Z,1520529952.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:52.951Z,1520529952.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:52.967Z,1520529952.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:53.355Z,1520529953.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:53.370Z,1520529953.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:53.759Z,1520529953.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:53.779Z,1520529953.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:54.149Z,1520529954.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:54.165Z,1520529954.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:54.555Z,1520529954.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:54.570Z,1520529954.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:54.951Z,1520529954.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:54.966Z,1520529954.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:55.353Z,1520529955.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:55.372Z,1520529955.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:55.759Z,1520529955.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:55.773Z,1520529955.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:56.151Z,1520529956.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:56.165Z,1520529956.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:56.553Z,1520529956.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:56.568Z,1520529956.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:56.935Z,1520529956.935 [NAL9602](INFO): Powering up NAL9602
2018-03-08T17:25:56.963Z,1520529956.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:56.983Z,1520529956.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:57.358Z,1520529957.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:57.373Z,1520529957.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:57.760Z,1520529957.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:57.775Z,1520529957.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:58.158Z,1520529958.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:58.173Z,1520529958.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:58.559Z,1520529958.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:58.579Z,1520529958.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:58.958Z,1520529958.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:58.974Z,1520529958.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:59.358Z,1520529959.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:59.373Z,1520529959.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:25:59.759Z,1520529959.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:25:59.774Z,1520529959.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:00.149Z,1520529960.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:00.164Z,1520529960.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:00.559Z,1520529960.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:00.573Z,1520529960.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:00.958Z,1520529960.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:00.973Z,1520529960.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:01.352Z,1520529961.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:01.367Z,1520529961.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:01.755Z,1520529961.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:01.775Z,1520529961.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:02.158Z,1520529962.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:02.173Z,1520529962.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:02.554Z,1520529962.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:02.570Z,1520529962.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:02.955Z,1520529962.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:02.970Z,1520529962.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:03.359Z,1520529963.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:03.378Z,1520529963.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:03.758Z,1520529963.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:03.774Z,1520529963.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:04.158Z,1520529964.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:04.173Z,1520529964.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:04.558Z,1520529964.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:04.573Z,1520529964.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:04.958Z,1520529964.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:04.979Z,1520529964.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:05.354Z,1520529965.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:05.369Z,1520529965.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:05.755Z,1520529965.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:05.770Z,1520529965.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:06.153Z,1520529966.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:06.168Z,1520529966.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:06.558Z,1520529966.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:06.579Z,1520529966.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:06.958Z,1520529966.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:06.973Z,1520529966.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:07.354Z,1520529967.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:07.369Z,1520529967.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:07.760Z,1520529967.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:07.787Z,1520529967.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:08.132Z,1520529968.132 [NAL9602](INFO): NAL9602 initialized
2018-03-08T17:26:08.161Z,1520529968.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:08.203Z,1520529968.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:08.560Z,1520529968.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:08.575Z,1520529968.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:08.965Z,1520529968.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:08.980Z,1520529968.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:09.366Z,1520529969.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:09.389Z,1520529969.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:09.765Z,1520529969.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:09.785Z,1520529969.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:10.157Z,1520529970.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:10.183Z,1520529970.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:10.560Z,1520529970.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:10.575Z,1520529970.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:10.960Z,1520529970.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:10.977Z,1520529970.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:11.361Z,1520529971.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:11.381Z,1520529971.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:11.765Z,1520529971.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:11.781Z,1520529971.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:12.164Z,1520529972.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:12.180Z,1520529972.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:12.565Z,1520529972.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:12.589Z,1520529972.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:12.960Z,1520529972.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:12.981Z,1520529972.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:13.360Z,1520529973.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:13.375Z,1520529973.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:13.765Z,1520529973.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:13.780Z,1520529973.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:14.165Z,1520529974.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:14.206Z,1520529974.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:14.570Z,1520529974.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:14.588Z,1520529974.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:14.962Z,1520529974.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:14.994Z,1520529974.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:15.357Z,1520529975.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:15.372Z,1520529975.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:15.761Z,1520529975.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:15.779Z,1520529975.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:16.172Z,1520529976.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:16.189Z,1520529976.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:16.568Z,1520529976.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:16.613Z,1520529976.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:16.961Z,1520529976.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:16.976Z,1520529976.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:17.356Z,1520529977.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:17.371Z,1520529977.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:17.768Z,1520529977.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:17.787Z,1520529977.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:18.168Z,1520529978.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:18.213Z,1520529978.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:18.569Z,1520529978.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:18.596Z,1520529978.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:18.960Z,1520529978.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:18.975Z,1520529978.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:19.343Z,1520529979.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:19.384Z,1520529979.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:19.773Z,1520529979.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:19.788Z,1520529979.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:20.173Z,1520529980.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:20.214Z,1520529980.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:20.562Z,1520529980.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:20.579Z,1520529980.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:20.962Z,1520529980.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:20.982Z,1520529980.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:21.360Z,1520529981.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:21.375Z,1520529981.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:21.770Z,1520529981.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:21.786Z,1520529981.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:22.173Z,1520529982.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:22.193Z,1520529982.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:22.571Z,1520529982.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:22.589Z,1520529982.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:22.961Z,1520529982.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:22.996Z,1520529982.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:23.362Z,1520529983.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:23.377Z,1520529983.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:23.774Z,1520529983.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:23.793Z,1520529983.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:24.172Z,1520529984.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:24.190Z,1520529984.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:24.574Z,1520529984.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:24.615Z,1520529984.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:24.959Z,1520529984.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:24.974Z,1520529984.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:25.348Z,1520529985.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:25.376Z,1520529985.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:25.776Z,1520529985.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:25.797Z,1520529985.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:26.167Z,1520529986.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:26.212Z,1520529986.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:26.567Z,1520529986.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:26.583Z,1520529986.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:26.952Z,1520529986.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:26.987Z,1520529986.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:27.341Z,1520529987.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:27.376Z,1520529987.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:27.752Z,1520529987.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:27.782Z,1520529987.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:28.171Z,1520529988.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:28.208Z,1520529988.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:28.561Z,1520529988.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:28.599Z,1520529988.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:28.952Z,1520529988.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:28.970Z,1520529988.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:29.352Z,1520529989.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:29.383Z,1520529989.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:29.769Z,1520529989.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:29.809Z,1520529989.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:30.169Z,1520529990.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:30.206Z,1520529990.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:30.562Z,1520529990.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:30.582Z,1520529990.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:30.960Z,1520529990.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:30.976Z,1520529990.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:31.356Z,1520529991.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:31.371Z,1520529991.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:31.761Z,1520529991.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:31.778Z,1520529991.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:32.160Z,1520529992.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:32.181Z,1520529992.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:32.560Z,1520529992.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:32.577Z,1520529992.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:32.957Z,1520529992.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:32.972Z,1520529992.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:33.352Z,1520529993.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:33.368Z,1520529993.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:33.760Z,1520529993.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:33.781Z,1520529993.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:34.165Z,1520529994.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:34.180Z,1520529994.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:34.560Z,1520529994.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:34.576Z,1520529994.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:34.956Z,1520529994.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:34.972Z,1520529994.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:35.361Z,1520529995.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:35.381Z,1520529995.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:35.765Z,1520529995.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:35.781Z,1520529995.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:36.165Z,1520529996.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:36.181Z,1520529996.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:36.565Z,1520529996.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:36.609Z,1520529996.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:36.954Z,1520529996.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:36.974Z,1520529996.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:37.361Z,1520529997.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:37.376Z,1520529997.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:37.765Z,1520529997.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:37.780Z,1520529997.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:38.160Z,1520529998.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:38.190Z,1520529998.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:38.570Z,1520529998.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:38.588Z,1520529998.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:38.961Z,1520529998.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:38.987Z,1520529998.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:39.360Z,1520529999.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:39.377Z,1520529999.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:39.765Z,1520529999.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:39.786Z,1520529999.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:40.171Z,1520530000.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:40.189Z,1520530000.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:40.565Z,1520530000.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:40.615Z,1520530000.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:40.960Z,1520530000.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:40.975Z,1520530000.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:41.356Z,1520530001.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:41.371Z,1520530001.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:41.770Z,1520530001.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:41.788Z,1520530001.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:42.169Z,1520530002.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:42.213Z,1520530002.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:42.569Z,1520530002.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:42.596Z,1520530002.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:42.961Z,1520530002.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:42.979Z,1520530002.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:43.354Z,1520530003.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:43.379Z,1520530003.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:43.769Z,1520530003.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:43.784Z,1520530003.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:44.168Z,1520530004.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:44.185Z,1520530004.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:47.266Z,1520530007.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:47.282Z,1520530007.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:47.381Z,1520530007.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:47.418Z,1520530007.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:47.739Z,1520530007.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:47.787Z,1520530007.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:48.130Z,1520530008.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:48.166Z,1520530008.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:48.526Z,1520530008.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:48.542Z,1520530008.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:48.946Z,1520530008.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:48.975Z,1520530008.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:49.357Z,1520530009.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:49.382Z,1520530009.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:49.746Z,1520530009.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:49.777Z,1520530009.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:50.135Z,1520530010.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:50.169Z,1520530010.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:50.536Z,1520530010.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:50.571Z,1520530010.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:50.932Z,1520530010.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:50.948Z,1520530010.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:51.335Z,1520530011.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:51.350Z,1520530011.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:51.747Z,1520530011.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:51.778Z,1520530011.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:52.141Z,1520530012.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:52.156Z,1520530012.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:52.553Z,1520530012.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:52.593Z,1520530012.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:52.937Z,1520530012.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:52.952Z,1520530012.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:53.331Z,1520530013.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:53.354Z,1520530013.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:53.742Z,1520530013.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:53.758Z,1520530013.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:54.146Z,1520530014.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:54.161Z,1520530014.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:54.544Z,1520530014.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:54.559Z,1520530014.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:54.940Z,1520530014.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:54.955Z,1520530014.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:55.343Z,1520530015.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:55.367Z,1520530015.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:55.745Z,1520530015.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:55.760Z,1520530015.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:56.153Z,1520530016.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:56.173Z,1520530016.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:56.555Z,1520530016.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:56.570Z,1520530016.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:56.927Z,1520530016.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:56.955Z,1520530016.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:57.326Z,1520530017.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:57.355Z,1520530017.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:57.751Z,1520530017.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:57.768Z,1520530017.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:58.153Z,1520530018.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:58.168Z,1520530018.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:58.514Z,1520530018.514 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-03-08T17:26:58.514Z,1520530018.514 [DropWeight] Hardware Fault, FailCount= 1
2018-03-08T17:26:58.514Z,1520530018.514 [DropWeight](ERROR): Hardware Fault
2018-03-08T17:26:58.558Z,1520530018.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:58.588Z,1520530018.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:58.617Z,1520530018.617 [CBIT](INFO): Critical error at 20180308T172658
2018-03-08T17:26:58.620Z,1520530018.620 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-03-08T17:26:58.620Z,1520530018.620 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-03-08T17:26:58.931Z,1520530018.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:58.959Z,1520530018.959 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:58.960Z,1520530018.960 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 194
2018-03-08T17:26:58.960Z,1520530018.960 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T17:26:58.962Z,1520530018.962 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:58.962Z,1520530018.962 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 194
2018-03-08T17:26:58.962Z,1520530018.962 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T17:26:58.964Z,1520530018.964 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:26:58.964Z,1520530018.964 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 194
2018-03-08T17:26:58.964Z,1520530018.964 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T17:26:58.974Z,1520530018.974 [CBIT](INFO): Critical error at 20180308T172658
2018-03-08T17:26:58.977Z,1520530018.977 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T17:26:58.977Z,1520530018.977 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T17:26:58.978Z,1520530018.978 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T17:26:59.347Z,1520530019.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:59.382Z,1520530019.382 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T17:26:59.382Z,1520530019.382 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 194
2018-03-08T17:26:59.383Z,1520530019.383 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T17:26:59.383Z,1520530019.383 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 194
2018-03-08T17:26:59.383Z,1520530019.383 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T17:26:59.383Z,1520530019.383 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 194
2018-03-08T17:26:59.738Z,1520530019.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:26:59.771Z,1520530019.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T17:26:59.771Z,1520530019.771 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:26:59.772Z,1520530019.772 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:26:59.772Z,1520530019.772 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T17:26:59.772Z,1520530019.772 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:26:59.773Z,1520530019.773 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:26:59.773Z,1520530019.773 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T17:26:59.774Z,1520530019.774 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:26:59.774Z,1520530019.774 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:27:00.145Z,1520530020.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:00.169Z,1520530020.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T17:27:00.170Z,1520530020.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:00.545Z,1520530020.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:00.569Z,1520530020.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T17:27:00.570Z,1520530020.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:00.932Z,1520530020.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:00.962Z,1520530020.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T17:27:00.963Z,1520530020.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:01.328Z,1520530021.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:01.362Z,1520530021.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T17:27:01.363Z,1520530021.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:01.742Z,1520530021.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:01.769Z,1520530021.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T17:27:01.770Z,1520530021.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:02.142Z,1520530022.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:02.180Z,1520530022.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T17:27:02.186Z,1520530022.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:02.547Z,1520530022.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:02.578Z,1520530022.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T17:27:02.579Z,1520530022.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:02.937Z,1520530022.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:02.968Z,1520530022.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T17:27:02.973Z,1520530022.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:03.335Z,1520530023.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:03.352Z,1520530023.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T17:27:03.373Z,1520530023.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:03.747Z,1520530023.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:03.780Z,1520530023.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T17:27:03.782Z,1520530023.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:04.146Z,1520530024.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:04.181Z,1520530024.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T17:27:04.182Z,1520530024.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:04.542Z,1520530024.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:04.578Z,1520530024.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T17:27:04.579Z,1520530024.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:04.931Z,1520530024.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:04.946Z,1520530024.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T17:27:04.947Z,1520530024.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:05.337Z,1520530025.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:05.352Z,1520530025.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T17:27:05.354Z,1520530025.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:05.750Z,1520530025.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:05.783Z,1520530025.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T17:27:05.784Z,1520530025.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:06.145Z,1520530026.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:06.160Z,1520530026.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T17:27:06.161Z,1520530026.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:06.544Z,1520530026.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:06.559Z,1520530026.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T17:27:06.560Z,1520530026.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:06.938Z,1520530026.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:06.957Z,1520530026.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T17:27:06.958Z,1520530026.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:07.330Z,1520530027.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:07.350Z,1520530027.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T17:27:07.351Z,1520530027.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:07.746Z,1520530027.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:07.761Z,1520530027.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T17:27:07.762Z,1520530027.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:08.149Z,1520530028.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:08.164Z,1520530028.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T17:27:08.165Z,1520530028.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:08.539Z,1520530028.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:08.564Z,1520530028.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T17:27:08.565Z,1520530028.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:08.941Z,1520530028.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:08.956Z,1520530028.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T17:27:08.957Z,1520530028.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:09.329Z,1520530029.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:09.355Z,1520530029.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T17:27:09.356Z,1520530029.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:09.745Z,1520530029.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:09.765Z,1520530029.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T17:27:09.766Z,1520530029.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:10.145Z,1520530030.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:10.166Z,1520530030.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T17:27:10.167Z,1520530030.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:10.546Z,1520530030.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:10.561Z,1520530030.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T17:27:10.562Z,1520530030.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:10.939Z,1520530030.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:10.954Z,1520530030.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T17:27:10.954Z,1520530030.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:11.322Z,1520530031.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:11.349Z,1520530031.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T17:27:11.350Z,1520530031.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:11.742Z,1520530031.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:11.763Z,1520530031.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T17:27:11.764Z,1520530031.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:12.146Z,1520530032.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:12.167Z,1520530032.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T17:27:12.171Z,1520530032.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:12.550Z,1520530032.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:12.565Z,1520530032.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T17:27:12.566Z,1520530032.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:12.928Z,1520530032.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:12.951Z,1520530032.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T17:27:12.952Z,1520530032.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:13.321Z,1520530033.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:13.360Z,1520530033.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T17:27:13.361Z,1520530033.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:13.750Z,1520530033.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:13.765Z,1520530033.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T17:27:13.767Z,1520530033.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:14.154Z,1520530034.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:14.169Z,1520530034.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T17:27:14.170Z,1520530034.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:14.533Z,1520530034.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:14.559Z,1520530034.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T17:27:14.560Z,1520530034.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:14.931Z,1520530034.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:14.959Z,1520530034.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T17:27:14.960Z,1520530034.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:15.335Z,1520530035.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:15.361Z,1520530035.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T17:27:15.362Z,1520530035.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:15.750Z,1520530035.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:15.765Z,1520530035.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T17:27:15.766Z,1520530035.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:16.154Z,1520530036.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:16.169Z,1520530036.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T17:27:16.170Z,1520530036.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:16.547Z,1520530036.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:16.562Z,1520530036.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T17:27:16.563Z,1520530036.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:16.927Z,1520530036.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:16.959Z,1520530036.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T17:27:16.959Z,1520530036.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:17.330Z,1520530037.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:17.357Z,1520530037.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T17:27:17.358Z,1520530037.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:17.747Z,1520530037.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:17.766Z,1520530037.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T17:27:17.767Z,1520530037.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:18.146Z,1520530038.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:18.166Z,1520530038.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T17:27:18.167Z,1520530038.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:18.534Z,1520530038.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:18.577Z,1520530038.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T17:27:18.578Z,1520530038.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:18.931Z,1520530038.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:18.958Z,1520530038.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T17:27:18.959Z,1520530038.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:19.326Z,1520530039.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:19.359Z,1520530039.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:19.751Z,1520530039.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:19.767Z,1520530039.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:20.150Z,1520530040.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:20.166Z,1520530040.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:20.547Z,1520530040.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:20.576Z,1520530040.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:20.931Z,1520530040.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:20.958Z,1520530040.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:21.326Z,1520530041.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:21.359Z,1520530041.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:21.750Z,1520530041.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:21.766Z,1520530041.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:22.154Z,1520530042.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:22.170Z,1520530042.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:22.549Z,1520530042.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:22.570Z,1520530042.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:22.931Z,1520530042.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:22.962Z,1520530042.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:23.330Z,1520530043.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:23.362Z,1520530043.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:23.738Z,1520530043.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:23.764Z,1520530043.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:24.137Z,1520530044.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:24.172Z,1520530044.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:24.551Z,1520530044.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:24.567Z,1520530044.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:24.927Z,1520530044.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:24.959Z,1520530044.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:25.330Z,1520530045.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:25.370Z,1520530045.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:25.742Z,1520530045.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:25.769Z,1520530045.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:26.142Z,1520530046.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:26.186Z,1520530046.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:26.541Z,1520530046.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:26.577Z,1520530046.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:26.928Z,1520530046.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:26.944Z,1520530046.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:27.334Z,1520530047.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:27.349Z,1520530047.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:27.746Z,1520530047.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:27.779Z,1520530047.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:28.150Z,1520530048.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:28.179Z,1520530048.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:28.546Z,1520530048.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:28.577Z,1520530048.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:28.931Z,1520530048.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:28.947Z,1520530048.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:29.331Z,1520530049.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:29.354Z,1520530049.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:29.746Z,1520530049.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:29.777Z,1520530049.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:30.141Z,1520530050.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:30.156Z,1520530050.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:30.550Z,1520530050.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:30.583Z,1520530050.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:30.937Z,1520530050.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:30.952Z,1520530050.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:31.335Z,1520530051.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:31.349Z,1520530051.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:31.738Z,1520530051.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:31.754Z,1520530051.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:32.142Z,1520530052.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:32.157Z,1520530052.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:32.541Z,1520530052.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:32.556Z,1520530052.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:32.934Z,1520530052.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:32.954Z,1520530052.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:33.338Z,1520530053.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:33.353Z,1520530053.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:33.741Z,1520530053.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:33.756Z,1520530053.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:34.145Z,1520530054.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:34.190Z,1520530054.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:34.540Z,1520530054.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:34.555Z,1520530054.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:34.937Z,1520530054.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:34.952Z,1520530054.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:35.339Z,1520530055.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:35.355Z,1520530055.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:35.757Z,1520530055.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:35.797Z,1520530055.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:36.146Z,1520530056.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:36.161Z,1520530056.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:36.545Z,1520530056.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:36.560Z,1520530056.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:36.941Z,1520530056.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:36.956Z,1520530056.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:37.332Z,1520530057.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:37.348Z,1520530057.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:37.745Z,1520530057.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:37.761Z,1520530057.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:38.145Z,1520530058.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:38.167Z,1520530058.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:38.551Z,1520530058.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:38.566Z,1520530058.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:38.947Z,1520530058.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:38.962Z,1520530058.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:39.334Z,1520530059.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:39.355Z,1520530059.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:39.749Z,1520530059.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:39.764Z,1520530059.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:40.149Z,1520530060.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:40.169Z,1520530060.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:40.549Z,1520530060.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:40.564Z,1520530060.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:40.939Z,1520530060.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:40.955Z,1520530060.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:41.324Z,1520530061.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:41.354Z,1520530061.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:41.745Z,1520530061.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:41.770Z,1520530061.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:42.156Z,1520530062.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:42.172Z,1520530062.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:42.541Z,1520530062.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:42.580Z,1520530062.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:42.931Z,1520530062.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:42.965Z,1520530062.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:43.326Z,1520530063.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:43.363Z,1520530063.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:43.755Z,1520530063.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:43.771Z,1520530063.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:44.145Z,1520530064.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:44.172Z,1520530064.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:44.537Z,1520530064.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:44.564Z,1520530064.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:47.659Z,1520530067.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:47.675Z,1520530067.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:47.768Z,1520530067.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:47.816Z,1520530067.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:48.142Z,1520530068.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:48.168Z,1520530068.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:48.537Z,1520530068.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:48.564Z,1520530068.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:48.942Z,1520530068.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:48.971Z,1520530068.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:49.330Z,1520530069.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:49.366Z,1520530069.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:49.722Z,1520530069.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:49.738Z,1520530069.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:50.131Z,1520530070.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:50.147Z,1520530070.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:50.531Z,1520530070.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:50.577Z,1520530070.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:50.936Z,1520530070.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:50.952Z,1520530070.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:51.334Z,1520530071.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:51.349Z,1520530071.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:51.734Z,1520530071.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:51.749Z,1520530071.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:52.129Z,1520530072.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:52.145Z,1520530072.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:52.531Z,1520530072.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:52.548Z,1520530072.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:52.929Z,1520530072.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:52.945Z,1520530072.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:53.331Z,1520530073.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:53.347Z,1520530073.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:53.746Z,1520530073.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:53.777Z,1520530073.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:54.138Z,1520530074.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:54.153Z,1520530074.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:54.537Z,1520530074.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:54.552Z,1520530074.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:54.936Z,1520530074.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:54.951Z,1520530074.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:55.332Z,1520530075.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:55.348Z,1520530075.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:55.740Z,1520530075.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:55.762Z,1520530075.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:56.144Z,1520530076.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:56.160Z,1520530076.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:56.544Z,1520530076.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:56.560Z,1520530076.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:56.931Z,1520530076.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:56.947Z,1520530076.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:57.334Z,1520530077.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:57.358Z,1520530077.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:57.745Z,1520530077.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:57.760Z,1520530077.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:58.142Z,1520530078.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:58.157Z,1520530078.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:58.541Z,1520530078.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:58.556Z,1520530078.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:58.929Z,1520530078.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:58.954Z,1520530078.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:59.326Z,1520530079.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:59.353Z,1520530079.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:27:59.750Z,1520530079.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:27:59.796Z,1520530079.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:00.153Z,1520530080.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:00.172Z,1520530080.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:00.546Z,1520530080.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:00.561Z,1520530080.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:00.927Z,1520530080.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:00.972Z,1520530080.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:01.326Z,1520530081.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:01.353Z,1520530081.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:01.739Z,1520530081.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:01.754Z,1520530081.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:02.151Z,1520530082.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:02.166Z,1520530082.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:02.542Z,1520530082.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:02.557Z,1520530082.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:02.923Z,1520530082.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:02.951Z,1520530082.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:03.325Z,1520530083.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:03.352Z,1520530083.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:03.742Z,1520530083.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:03.757Z,1520530083.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:04.142Z,1520530084.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:04.158Z,1520530084.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:04.542Z,1520530084.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:04.557Z,1520530084.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:04.924Z,1520530084.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:04.951Z,1520530084.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:05.323Z,1520530085.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:05.350Z,1520530085.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:05.746Z,1520530085.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:05.761Z,1520530085.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:06.146Z,1520530086.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:06.161Z,1520530086.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:06.542Z,1520530086.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:06.557Z,1520530086.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:06.924Z,1520530086.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:06.956Z,1520530086.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:07.322Z,1520530087.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:07.355Z,1520530087.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:07.729Z,1520530087.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:07.766Z,1520530087.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:08.150Z,1520530088.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:08.165Z,1520530088.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:08.541Z,1520530088.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:08.560Z,1520530088.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:08.923Z,1520530088.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:08.956Z,1520530088.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:09.322Z,1520530089.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:09.359Z,1520530089.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:09.746Z,1520530089.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:09.761Z,1520530089.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:10.133Z,1520530090.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:10.160Z,1520530090.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:10.545Z,1520530090.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:10.564Z,1520530090.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:10.923Z,1520530090.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:10.951Z,1520530090.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:11.326Z,1520530091.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:11.367Z,1520530091.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:11.738Z,1520530091.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:11.765Z,1520530091.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:12.136Z,1520530092.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:12.167Z,1520530092.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:12.532Z,1520530092.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:12.567Z,1520530092.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:12.927Z,1520530092.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:12.959Z,1520530092.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:13.330Z,1520530093.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:13.364Z,1520530093.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:13.742Z,1520530093.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:13.765Z,1520530093.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:14.142Z,1520530094.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:14.171Z,1520530094.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:14.542Z,1520530094.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:14.576Z,1520530094.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:14.931Z,1520530094.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:14.967Z,1520530094.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:15.326Z,1520530095.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:15.362Z,1520530095.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:15.742Z,1520530095.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:15.767Z,1520530095.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:16.141Z,1520530096.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:16.168Z,1520530096.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:16.546Z,1520530096.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:16.575Z,1520530096.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:16.929Z,1520530096.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:16.966Z,1520530096.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:17.329Z,1520530097.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:17.345Z,1520530097.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:17.746Z,1520530097.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:17.781Z,1520530097.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:18.142Z,1520530098.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:18.174Z,1520530098.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:18.539Z,1520530098.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:18.554Z,1520530098.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:18.929Z,1520530098.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:18.946Z,1520530098.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:19.330Z,1520530099.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:19.347Z,1520530099.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:19.734Z,1520530099.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:19.750Z,1520530099.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:20.134Z,1520530100.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:20.155Z,1520530100.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:20.536Z,1520530100.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:20.559Z,1520530100.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:20.941Z,1520530100.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:20.957Z,1520530100.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:21.329Z,1520530101.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:21.349Z,1520530101.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:21.774Z,1520530101.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:21.824Z,1520530101.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:22.141Z,1520530102.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:22.169Z,1520530102.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:22.529Z,1520530102.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:22.574Z,1520530102.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:22.928Z,1520530102.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:22.950Z,1520530102.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:23.332Z,1520530103.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:23.347Z,1520530103.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:23.734Z,1520530103.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:23.750Z,1520530103.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:24.138Z,1520530104.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:24.153Z,1520530104.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:24.537Z,1520530104.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:24.552Z,1520530104.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:24.923Z,1520530104.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:24.950Z,1520530104.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:25.323Z,1520530105.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:25.355Z,1520530105.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:25.743Z,1520530105.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:25.758Z,1520530105.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:26.142Z,1520530106.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:26.157Z,1520530106.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:26.538Z,1520530106.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:26.560Z,1520530106.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:26.927Z,1520530106.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:26.954Z,1520530106.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:27.320Z,1520530107.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:27.356Z,1520530107.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:27.743Z,1520530107.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:27.758Z,1520530107.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:28.141Z,1520530108.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:28.167Z,1520530108.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:28.541Z,1520530108.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:28.561Z,1520530108.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:28.923Z,1520530108.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:28.955Z,1520530108.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:29.326Z,1520530109.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:29.353Z,1520530109.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:29.745Z,1520530109.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:29.761Z,1520530109.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:30.150Z,1520530110.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:30.165Z,1520530110.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:30.528Z,1520530110.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:30.563Z,1520530110.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:30.927Z,1520530110.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:30.954Z,1520530110.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:31.322Z,1520530111.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:31.355Z,1520530111.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:31.746Z,1520530111.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:31.761Z,1520530111.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:32.134Z,1520530112.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:32.168Z,1520530112.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:32.546Z,1520530112.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:32.561Z,1520530112.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:32.931Z,1520530112.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:32.958Z,1520530112.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:33.316Z,1520530113.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:33.359Z,1520530113.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:33.738Z,1520530113.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:33.764Z,1520530113.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:34.137Z,1520530114.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:34.164Z,1520530114.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:34.534Z,1520530114.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:34.560Z,1520530114.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:34.932Z,1520530114.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:34.961Z,1520530114.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:35.323Z,1520530115.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:35.339Z,1520530115.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:35.734Z,1520530115.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:35.767Z,1520530115.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:36.154Z,1520530116.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:36.169Z,1520530116.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:36.532Z,1520530116.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:36.569Z,1520530116.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:36.927Z,1520530116.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:36.944Z,1520530116.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:37.330Z,1520530117.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:37.366Z,1520530117.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:37.737Z,1520530117.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:37.775Z,1520530117.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:38.137Z,1520530118.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:38.169Z,1520530118.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:38.546Z,1520530118.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:38.583Z,1520530118.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:38.935Z,1520530118.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:38.950Z,1520530118.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:39.334Z,1520530119.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:39.350Z,1520530119.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:39.738Z,1520530119.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:39.753Z,1520530119.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:40.141Z,1520530120.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:40.156Z,1520530120.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:40.536Z,1520530120.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:40.551Z,1520530120.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:40.929Z,1520530120.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:40.946Z,1520530120.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:41.330Z,1520530121.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:41.350Z,1520530121.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:41.739Z,1520530121.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:41.754Z,1520530121.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:42.138Z,1520530122.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:42.153Z,1520530122.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:42.537Z,1520530122.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:42.552Z,1520530122.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:42.935Z,1520530122.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:42.950Z,1520530122.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:43.329Z,1520530123.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:43.345Z,1520530123.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:43.348Z,1520530123.348 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T17:28:43.349Z,1520530123.349 [Default:CheckIn:C.Wait] Stopped
2018-03-08T17:28:43.349Z,1520530123.349 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T17:28:43.349Z,1520530123.349 [Default:CheckIn:D] Running Loop=1
2018-03-08T17:28:43.741Z,1520530123.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:43.756Z,1520530123.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:43.759Z,1520530123.759 [Default:CheckIn:D] Stopped
2018-03-08T17:28:43.759Z,1520530123.759 [Default:CheckIn:E] Running Loop=1
2018-03-08T17:28:44.138Z,1520530124.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:44.166Z,1520530124.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:44.177Z,1520530124.177 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 582.982552 min 
2018-03-08T17:28:44.178Z,1520530124.178 [Default:CheckIn:E] Stopped
2018-03-08T17:28:44.178Z,1520530124.178 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T17:28:44.178Z,1520530124.178 [Default:CheckIn] Stopped
2018-03-08T17:28:44.178Z,1520530124.178 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T17:28:44.178Z,1520530124.178 [Default:CheckIn](INFO): Running loop #57
2018-03-08T17:28:44.178Z,1520530124.178 [Default:CheckIn] Running Loop=57
2018-03-08T17:28:44.178Z,1520530124.178 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T17:28:44.179Z,1520530124.179 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T17:28:44.545Z,1520530124.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:44.560Z,1520530124.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:44.931Z,1520530124.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:44.947Z,1520530124.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:48.031Z,1520530128.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:48.047Z,1520530128.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:48.165Z,1520530128.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:48.198Z,1520530128.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:48.513Z,1520530128.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:48.550Z,1520530128.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:48.908Z,1520530128.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:48.930Z,1520530128.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:49.308Z,1520530129.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:49.324Z,1520530129.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:49.707Z,1520530129.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:49.722Z,1520530129.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:50.097Z,1520530130.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:50.125Z,1520530130.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:50.507Z,1520530130.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:50.522Z,1520530130.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:50.909Z,1520530130.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:50.925Z,1520530130.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:51.310Z,1520530131.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:51.324Z,1520530131.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:51.709Z,1520530131.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:51.724Z,1520530131.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:52.108Z,1520530132.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:52.123Z,1520530132.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:52.505Z,1520530132.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:52.520Z,1520530132.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:52.907Z,1520530132.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:52.923Z,1520530132.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:53.307Z,1520530133.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:53.327Z,1520530133.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:53.706Z,1520530133.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:53.721Z,1520530133.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:54.109Z,1520530134.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:54.125Z,1520530134.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:54.510Z,1520530134.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:54.525Z,1520530134.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:54.921Z,1520530134.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:54.954Z,1520530134.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:55.291Z,1520530135.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:55.319Z,1520530135.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:55.707Z,1520530135.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:55.723Z,1520530135.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:56.099Z,1520530136.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:56.115Z,1520530136.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:56.493Z,1520530136.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:56.523Z,1520530136.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:56.917Z,1520530136.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:56.934Z,1520530136.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:57.313Z,1520530137.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:57.329Z,1520530137.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:57.712Z,1520530137.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:57.729Z,1520530137.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:58.097Z,1520530138.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:58.119Z,1520530138.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:58.490Z,1520530138.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:58.524Z,1520530138.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:58.906Z,1520530138.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:58.927Z,1520530138.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:59.307Z,1520530139.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:59.323Z,1520530139.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:28:59.708Z,1520530139.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:28:59.723Z,1520530139.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:00.112Z,1520530140.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:00.128Z,1520530140.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:00.517Z,1520530140.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:00.532Z,1520530140.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:00.917Z,1520530140.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:00.932Z,1520530140.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:01.292Z,1520530141.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:01.320Z,1520530141.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:01.699Z,1520530141.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:01.725Z,1520530141.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:02.091Z,1520530142.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:02.122Z,1520530142.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:02.498Z,1520530142.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:02.525Z,1520530142.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:02.912Z,1520530142.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:02.935Z,1520530142.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:03.321Z,1520530143.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:03.337Z,1520530143.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:03.712Z,1520530143.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:03.733Z,1520530143.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:04.094Z,1520530144.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:04.120Z,1520530144.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:04.491Z,1520530144.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:04.527Z,1520530144.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:04.898Z,1520530144.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:04.930Z,1520530144.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:05.295Z,1520530145.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:05.362Z,1520530145.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:05.693Z,1520530145.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:05.726Z,1520530145.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:06.111Z,1520530146.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:06.131Z,1520530146.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:06.521Z,1520530146.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:06.537Z,1520530146.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:06.904Z,1520530146.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:06.930Z,1520530146.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:07.292Z,1520530147.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:07.307Z,1520530147.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:07.694Z,1520530147.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:07.735Z,1520530147.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:08.099Z,1520530148.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:08.114Z,1520530148.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:08.496Z,1520530148.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:08.512Z,1520530148.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:08.913Z,1520530148.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:08.939Z,1520530148.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:09.313Z,1520530149.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:09.337Z,1520530149.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:09.709Z,1520530149.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:09.741Z,1520530149.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:10.099Z,1520530150.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:10.142Z,1520530150.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:10.499Z,1520530150.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:10.514Z,1520530150.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:10.902Z,1520530150.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:10.943Z,1520530150.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:11.301Z,1520530151.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:11.316Z,1520530151.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:11.703Z,1520530151.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:11.718Z,1520530151.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:12.101Z,1520530152.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:12.117Z,1520530152.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:12.517Z,1520530152.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:12.540Z,1520530152.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:12.909Z,1520530152.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:12.941Z,1520530152.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:13.291Z,1520530153.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:13.323Z,1520530153.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:13.702Z,1520530153.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:13.723Z,1520530153.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:14.104Z,1520530154.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:14.119Z,1520530154.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:14.503Z,1520530154.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:14.519Z,1520530154.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:14.917Z,1520530154.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:14.949Z,1520530154.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:15.314Z,1520530155.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:15.329Z,1520530155.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:15.708Z,1520530155.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:15.724Z,1520530155.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:16.106Z,1520530156.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:16.123Z,1520530156.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:16.502Z,1520530156.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:16.517Z,1520530156.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:16.906Z,1520530156.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:16.923Z,1520530156.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:17.302Z,1520530157.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:17.323Z,1520530157.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:17.707Z,1520530157.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:17.722Z,1520530157.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:18.113Z,1520530158.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:18.135Z,1520530158.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:18.513Z,1520530158.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:18.535Z,1520530158.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:18.907Z,1520530158.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:18.932Z,1520530158.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:19.292Z,1520530159.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:19.324Z,1520530159.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:19.705Z,1520530159.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:19.724Z,1520530159.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:20.091Z,1520530160.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:20.119Z,1520530160.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:20.488Z,1520530160.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:20.516Z,1520530160.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:20.918Z,1520530160.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:20.934Z,1520530160.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:21.322Z,1520530161.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:21.337Z,1520530161.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:21.705Z,1520530161.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:21.728Z,1520530161.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:22.094Z,1520530162.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:22.120Z,1520530162.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:22.493Z,1520530162.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:22.528Z,1520530162.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:22.897Z,1520530162.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:22.912Z,1520530162.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:23.297Z,1520530163.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:23.325Z,1520530163.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:23.705Z,1520530163.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:23.720Z,1520530163.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:24.113Z,1520530164.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:24.135Z,1520530164.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:24.515Z,1520530164.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:24.539Z,1520530164.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:24.917Z,1520530164.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:24.932Z,1520530164.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:25.292Z,1520530165.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:25.319Z,1520530165.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:25.701Z,1520530165.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:25.720Z,1520530165.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:26.091Z,1520530166.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:26.125Z,1520530166.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:26.506Z,1520530166.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:26.523Z,1520530166.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:26.912Z,1520530166.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:26.935Z,1520530166.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:27.316Z,1520530167.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:27.331Z,1520530167.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:27.706Z,1520530167.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:27.734Z,1520530167.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:28.106Z,1520530168.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:28.123Z,1520530168.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:28.489Z,1520530168.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:28.527Z,1520530168.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:28.892Z,1520530168.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:28.920Z,1520530168.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:29.303Z,1520530169.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:29.330Z,1520530169.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:29.696Z,1520530169.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:29.731Z,1520530169.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:30.109Z,1520530170.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:30.134Z,1520530170.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:30.518Z,1520530170.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:30.534Z,1520530170.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:30.917Z,1520530170.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:30.944Z,1520530170.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:31.291Z,1520530171.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:31.334Z,1520530171.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:31.699Z,1520530171.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:31.732Z,1520530171.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:32.099Z,1520530172.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:32.115Z,1520530172.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:32.490Z,1520530172.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:32.506Z,1520530172.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:32.915Z,1520530172.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:32.939Z,1520530172.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:33.314Z,1520530173.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:33.338Z,1520530173.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:33.710Z,1520530173.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:33.738Z,1520530173.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:34.099Z,1520530174.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:34.136Z,1520530174.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:34.496Z,1520530174.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:34.511Z,1520530174.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:34.902Z,1520530174.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:34.947Z,1520530174.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:35.303Z,1520530175.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:35.319Z,1520530175.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:35.702Z,1520530175.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:35.717Z,1520530175.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:36.109Z,1520530176.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:36.141Z,1520530176.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:36.517Z,1520530176.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:36.550Z,1520530176.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:36.913Z,1520530176.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:36.928Z,1520530176.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:37.298Z,1520530177.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:37.314Z,1520530177.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:37.700Z,1520530177.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:37.722Z,1520530177.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:38.102Z,1520530178.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:38.117Z,1520530178.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:38.503Z,1520530178.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:38.519Z,1520530178.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:38.905Z,1520530178.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:38.921Z,1520530178.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:39.317Z,1520530179.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:39.332Z,1520530179.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:39.704Z,1520530179.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:39.719Z,1520530179.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:40.100Z,1520530180.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:40.123Z,1520530180.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:40.503Z,1520530180.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:40.518Z,1520530180.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:40.903Z,1520530180.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:40.919Z,1520530180.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:41.305Z,1520530181.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:41.320Z,1520530181.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:41.703Z,1520530181.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:41.718Z,1520530181.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:42.105Z,1520530182.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:42.121Z,1520530182.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:42.517Z,1520530182.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:42.532Z,1520530182.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:42.909Z,1520530182.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:42.930Z,1520530182.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:43.292Z,1520530183.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:43.322Z,1520530183.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:43.706Z,1520530183.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:43.721Z,1520530183.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:44.107Z,1520530184.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:44.122Z,1520530184.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:44.500Z,1520530184.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:44.515Z,1520530184.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:44.907Z,1520530184.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:44.930Z,1520530184.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:45.313Z,1520530185.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:45.328Z,1520530185.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:48.425Z,1520530188.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:48.455Z,1520530188.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:48.546Z,1520530188.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:48.581Z,1520530188.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:48.915Z,1520530188.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:48.931Z,1520530188.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:49.308Z,1520530189.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:49.330Z,1520530189.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:49.725Z,1520530189.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:49.757Z,1520530189.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:50.121Z,1520530190.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:50.139Z,1520530190.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:50.519Z,1520530190.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:50.539Z,1520530190.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:50.914Z,1520530190.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:50.930Z,1520530190.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:51.312Z,1520530191.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:51.327Z,1520530191.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:51.701Z,1520530191.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:51.724Z,1520530191.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:52.116Z,1520530192.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:52.132Z,1520530192.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:52.520Z,1520530192.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:52.536Z,1520530192.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:52.920Z,1520530192.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:52.936Z,1520530192.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:53.314Z,1520530193.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:53.329Z,1520530193.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:53.711Z,1520530193.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:53.727Z,1520530193.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:54.101Z,1520530194.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:54.138Z,1520530194.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:54.511Z,1520530194.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:54.526Z,1520530194.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:54.921Z,1520530194.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:54.937Z,1520530194.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:55.320Z,1520530195.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:55.337Z,1520530195.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:55.720Z,1520530195.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:55.736Z,1520530195.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:56.115Z,1520530196.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:56.130Z,1520530196.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:56.514Z,1520530196.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:56.535Z,1520530196.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:56.901Z,1520530196.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:56.924Z,1520530196.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:57.307Z,1520530197.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:57.330Z,1520530197.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:57.702Z,1520530197.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:57.726Z,1520530197.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:58.119Z,1520530198.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:58.135Z,1520530198.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:58.521Z,1520530198.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:58.537Z,1520530198.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:58.919Z,1520530198.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:58.939Z,1520530198.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:59.314Z,1520530199.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:59.330Z,1520530199.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:29:59.711Z,1520530199.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:29:59.735Z,1520530199.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:00.099Z,1520530200.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:00.130Z,1520530200.130 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:00.130Z,1520530200.130 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 195
2018-03-08T17:30:00.130Z,1520530200.130 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T17:30:00.132Z,1520530200.132 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:00.132Z,1520530200.132 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 195
2018-03-08T17:30:00.132Z,1520530200.132 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T17:30:00.135Z,1520530200.135 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:00.135Z,1520530200.135 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 195
2018-03-08T17:30:00.135Z,1520530200.135 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T17:30:00.147Z,1520530200.147 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T17:30:00.147Z,1520530200.147 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T17:30:00.147Z,1520530200.147 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T17:30:00.511Z,1520530200.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:00.538Z,1520530200.538 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T17:30:00.538Z,1520530200.538 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 195
2018-03-08T17:30:00.538Z,1520530200.538 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T17:30:00.538Z,1520530200.538 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 195
2018-03-08T17:30:00.539Z,1520530200.539 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T17:30:00.539Z,1520530200.539 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 195
2018-03-08T17:30:00.918Z,1520530200.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:00.937Z,1520530200.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T17:30:00.937Z,1520530200.937 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:30:00.938Z,1520530200.938 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:30:00.938Z,1520530200.938 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T17:30:00.938Z,1520530200.938 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:30:00.939Z,1520530200.939 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:30:00.939Z,1520530200.939 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T17:30:00.939Z,1520530200.939 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:30:00.940Z,1520530200.940 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:30:01.319Z,1520530201.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:01.346Z,1520530201.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T17:30:01.347Z,1520530201.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:01.717Z,1520530201.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:01.750Z,1520530201.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T17:30:01.751Z,1520530201.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:02.110Z,1520530202.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:02.143Z,1520530202.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T17:30:02.145Z,1520530202.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:02.503Z,1520530202.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:02.518Z,1520530202.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T17:30:02.519Z,1520530202.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:02.906Z,1520530202.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:02.946Z,1520530202.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T17:30:02.947Z,1520530202.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:03.309Z,1520530203.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:03.324Z,1520530203.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T17:30:03.325Z,1520530203.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:03.707Z,1520530203.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:03.722Z,1520530203.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T17:30:03.723Z,1520530203.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:04.116Z,1520530204.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:04.131Z,1520530204.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T17:30:04.132Z,1520530204.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:04.522Z,1520530204.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:04.549Z,1520530204.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T17:30:04.550Z,1520530204.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:04.925Z,1520530204.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:04.957Z,1520530204.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T17:30:04.958Z,1520530204.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:05.314Z,1520530205.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:05.329Z,1520530205.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T17:30:05.330Z,1520530205.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:05.715Z,1520530205.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:05.730Z,1520530205.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T17:30:05.731Z,1520530205.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:06.105Z,1520530206.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:06.125Z,1520530206.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T17:30:06.126Z,1520530206.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:06.506Z,1520530206.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:06.521Z,1520530206.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T17:30:06.522Z,1520530206.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:06.921Z,1520530206.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:06.937Z,1520530206.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T17:30:06.938Z,1520530206.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:07.321Z,1520530207.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:07.337Z,1520530207.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T17:30:07.338Z,1520530207.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:07.721Z,1520530207.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:07.736Z,1520530207.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T17:30:07.737Z,1520530207.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:08.115Z,1520530208.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:08.130Z,1520530208.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T17:30:08.131Z,1520530208.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:08.505Z,1520530208.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:08.525Z,1520530208.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T17:30:08.526Z,1520530208.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:08.908Z,1520530208.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:08.935Z,1520530208.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T17:30:08.936Z,1520530208.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:09.309Z,1520530209.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:09.341Z,1520530209.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T17:30:09.342Z,1520530209.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:09.707Z,1520530209.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:09.729Z,1520530209.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T17:30:09.730Z,1520530209.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:10.121Z,1520530210.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:10.137Z,1520530210.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T17:30:10.138Z,1520530210.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:10.521Z,1520530210.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:10.537Z,1520530210.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T17:30:10.538Z,1520530210.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:10.917Z,1520530210.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:10.938Z,1520530210.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T17:30:10.939Z,1520530210.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:11.316Z,1520530211.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:11.331Z,1520530211.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T17:30:11.333Z,1520530211.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:11.712Z,1520530211.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:11.727Z,1520530211.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T17:30:11.728Z,1520530211.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:12.110Z,1520530212.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:12.158Z,1520530212.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T17:30:12.159Z,1520530212.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:12.498Z,1520530212.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:12.531Z,1520530212.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T17:30:12.532Z,1520530212.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:12.925Z,1520530212.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:12.942Z,1520530212.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T17:30:12.943Z,1520530212.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:13.323Z,1520530213.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:13.339Z,1520530213.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T17:30:13.340Z,1520530213.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:13.717Z,1520530213.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:13.733Z,1520530213.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T17:30:13.734Z,1520530213.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:14.109Z,1520530214.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:14.138Z,1520530214.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T17:30:14.139Z,1520530214.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:14.514Z,1520530214.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:14.535Z,1520530214.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T17:30:14.536Z,1520530214.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:14.910Z,1520530214.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:14.925Z,1520530214.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T17:30:14.926Z,1520530214.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:15.312Z,1520530215.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:15.334Z,1520530215.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T17:30:15.335Z,1520530215.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:15.714Z,1520530215.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:15.735Z,1520530215.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T17:30:15.736Z,1520530215.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:16.116Z,1520530216.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:16.132Z,1520530216.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T17:30:16.134Z,1520530216.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:16.524Z,1520530216.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:16.546Z,1520530216.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T17:30:16.547Z,1520530216.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:16.920Z,1520530216.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:16.936Z,1520530216.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T17:30:16.937Z,1520530216.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:17.298Z,1520530217.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:17.330Z,1520530217.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T17:30:17.331Z,1520530217.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:17.711Z,1520530217.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:17.725Z,1520530217.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T17:30:17.726Z,1520530217.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:18.115Z,1520530218.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:18.130Z,1520530218.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T17:30:18.131Z,1520530218.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:18.502Z,1520530218.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:18.536Z,1520530218.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T17:30:18.537Z,1520530218.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:18.926Z,1520530218.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:18.941Z,1520530218.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T17:30:18.942Z,1520530218.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:19.327Z,1520530219.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:19.343Z,1520530219.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T17:30:19.344Z,1520530219.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:19.724Z,1520530219.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:19.746Z,1520530219.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T17:30:19.747Z,1520530219.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:20.102Z,1520530220.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:20.135Z,1520530220.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:20.514Z,1520530220.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:20.535Z,1520530220.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:20.902Z,1520530220.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:20.939Z,1520530220.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:21.307Z,1520530221.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:21.322Z,1520530221.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:21.727Z,1520530221.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:21.747Z,1520530221.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:22.121Z,1520530222.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:22.137Z,1520530222.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:22.524Z,1520530222.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:22.546Z,1520530222.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:22.924Z,1520530222.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:22.941Z,1520530222.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:23.314Z,1520530223.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:23.329Z,1520530223.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:23.703Z,1520530223.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:23.730Z,1520530223.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:24.115Z,1520530224.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:24.130Z,1520530224.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:24.498Z,1520530224.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:24.530Z,1520530224.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:24.925Z,1520530224.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:24.946Z,1520530224.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:25.328Z,1520530225.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:25.344Z,1520530225.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:25.725Z,1520530225.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:25.741Z,1520530225.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:26.115Z,1520530226.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:26.135Z,1520530226.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:26.513Z,1520530226.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:26.533Z,1520530226.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:26.902Z,1520530226.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:26.939Z,1520530226.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:27.307Z,1520530227.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:27.333Z,1520530227.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:27.706Z,1520530227.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:27.734Z,1520530227.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:28.109Z,1520530228.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:28.136Z,1520530228.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:28.530Z,1520530228.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:28.545Z,1520530228.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:28.924Z,1520530228.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:28.940Z,1520530228.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:29.298Z,1520530229.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:29.335Z,1520530229.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:29.706Z,1520530229.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:29.739Z,1520530229.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:30.107Z,1520530230.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:30.134Z,1520530230.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:30.502Z,1520530230.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:30.535Z,1520530230.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:30.926Z,1520530230.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:30.942Z,1520530230.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:31.327Z,1520530231.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:31.343Z,1520530231.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:31.709Z,1520530231.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:31.735Z,1520530231.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:32.102Z,1520530232.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:32.139Z,1520530232.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:32.506Z,1520530232.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:32.541Z,1520530232.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:32.902Z,1520530232.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:32.938Z,1520530232.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:33.304Z,1520530233.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:33.335Z,1520530233.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:33.702Z,1520530233.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:33.743Z,1520530233.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:34.121Z,1520530234.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:34.146Z,1520530234.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:34.521Z,1520530234.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:34.544Z,1520530234.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:34.921Z,1520530234.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:34.947Z,1520530234.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:35.311Z,1520530235.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:35.343Z,1520530235.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:35.706Z,1520530235.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:35.726Z,1520530235.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:36.104Z,1520530236.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:36.119Z,1520530236.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:36.506Z,1520530236.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:36.521Z,1520530236.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:36.921Z,1520530236.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:36.954Z,1520530236.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:37.326Z,1520530237.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:37.352Z,1520530237.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:37.725Z,1520530237.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:37.750Z,1520530237.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:38.114Z,1520530238.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:38.156Z,1520530238.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:38.514Z,1520530238.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:38.555Z,1520530238.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:38.907Z,1520530238.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:38.923Z,1520530238.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:39.311Z,1520530239.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:39.326Z,1520530239.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:39.711Z,1520530239.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:39.754Z,1520530239.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:40.125Z,1520530240.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:40.149Z,1520530240.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:40.521Z,1520530240.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:40.544Z,1520530240.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:40.925Z,1520530240.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:40.955Z,1520530240.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:41.307Z,1520530241.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:41.323Z,1520530241.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:41.711Z,1520530241.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:41.726Z,1520530241.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:42.110Z,1520530242.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:42.127Z,1520530242.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:42.507Z,1520530242.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:42.523Z,1520530242.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:42.925Z,1520530242.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:42.956Z,1520530242.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:43.321Z,1520530243.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:43.353Z,1520530243.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:43.725Z,1520530243.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:43.761Z,1520530243.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:44.115Z,1520530244.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:44.130Z,1520530244.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:44.505Z,1520530244.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:44.528Z,1520530244.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:44.915Z,1520530244.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:44.930Z,1520530244.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:45.314Z,1520530245.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:45.329Z,1520530245.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:48.414Z,1520530248.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:48.430Z,1520530248.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:48.534Z,1520530248.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:48.569Z,1520530248.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:48.913Z,1520530248.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:48.929Z,1520530248.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:49.289Z,1520530249.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:49.316Z,1520530249.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:49.682Z,1520530249.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:49.720Z,1520530249.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:50.087Z,1520530250.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:50.118Z,1520530250.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:50.486Z,1520530250.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:50.519Z,1520530250.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:50.889Z,1520530250.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:50.916Z,1520530250.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:51.308Z,1520530251.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:51.330Z,1520530251.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:51.689Z,1520530251.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:51.731Z,1520530251.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:52.082Z,1520530252.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:52.118Z,1520530252.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:52.487Z,1520530252.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:52.518Z,1520530252.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:52.878Z,1520530252.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:52.893Z,1520530252.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:53.283Z,1520530253.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:53.298Z,1520530253.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:53.686Z,1520530253.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:53.722Z,1520530253.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:54.097Z,1520530254.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:54.129Z,1520530254.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:54.502Z,1520530254.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:54.526Z,1520530254.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:54.901Z,1520530254.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:54.925Z,1520530254.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:55.286Z,1520530255.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:55.301Z,1520530255.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:55.682Z,1520530255.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:55.702Z,1520530255.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:56.088Z,1520530256.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:56.104Z,1520530256.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:56.486Z,1520530256.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:56.501Z,1520530256.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:56.901Z,1520530256.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:56.930Z,1520530256.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:57.297Z,1520530257.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:57.312Z,1520530257.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:57.701Z,1520530257.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:57.716Z,1520530257.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:58.088Z,1520530258.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:58.103Z,1520530258.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:58.484Z,1520530258.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:58.507Z,1520530258.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:58.887Z,1520530258.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:58.902Z,1520530258.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:59.288Z,1520530259.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:59.304Z,1520530259.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:30:59.684Z,1520530259.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:30:59.707Z,1520530259.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:00.089Z,1520530260.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:00.104Z,1520530260.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:00.493Z,1520530260.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:00.509Z,1520530260.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:00.901Z,1520530260.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:00.916Z,1520530260.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:01.287Z,1520530261.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:01.301Z,1520530261.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:01.686Z,1520530261.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:01.701Z,1520530261.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:02.087Z,1520530262.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:02.102Z,1520530262.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:02.487Z,1520530262.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:02.501Z,1520530262.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:02.893Z,1520530262.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:02.909Z,1520530262.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:03.297Z,1520530263.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:03.312Z,1520530263.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:03.692Z,1520530263.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:03.707Z,1520530263.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:04.091Z,1520530264.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:04.106Z,1520530264.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:04.486Z,1520530264.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:04.501Z,1520530264.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:04.887Z,1520530264.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:04.902Z,1520530264.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:05.290Z,1520530265.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:05.306Z,1520530265.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:05.690Z,1520530265.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:05.705Z,1520530265.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:06.093Z,1520530266.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:06.109Z,1520530266.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:06.497Z,1520530266.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:06.513Z,1520530266.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:06.894Z,1520530266.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:06.909Z,1520530266.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:07.287Z,1520530267.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:07.302Z,1520530267.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:07.690Z,1520530267.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:07.706Z,1520530267.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:08.085Z,1520530268.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:08.104Z,1520530268.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:08.487Z,1520530268.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:08.510Z,1520530268.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:08.894Z,1520530268.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:08.910Z,1520530268.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:09.297Z,1520530269.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:09.312Z,1520530269.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:09.693Z,1520530269.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:09.714Z,1520530269.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:10.088Z,1520530270.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:10.103Z,1520530270.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:10.486Z,1520530270.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:10.501Z,1520530270.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:10.887Z,1520530270.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:10.902Z,1520530270.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:11.290Z,1520530271.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:11.305Z,1520530271.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:11.687Z,1520530271.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:11.702Z,1520530271.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:12.093Z,1520530272.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:12.108Z,1520530272.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:12.497Z,1520530272.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:12.513Z,1520530272.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:12.893Z,1520530272.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:12.909Z,1520530272.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:13.290Z,1520530273.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:13.305Z,1520530273.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:13.691Z,1520530273.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:13.706Z,1520530273.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:14.087Z,1520530274.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:14.102Z,1520530274.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:14.491Z,1520530274.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:14.506Z,1520530274.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:14.893Z,1520530274.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:14.909Z,1520530274.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:15.297Z,1520530275.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:15.313Z,1520530275.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:15.692Z,1520530275.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:15.708Z,1520530275.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:16.090Z,1520530276.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:16.105Z,1520530276.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:16.490Z,1520530276.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:16.510Z,1520530276.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:16.887Z,1520530276.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:16.902Z,1520530276.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:17.285Z,1520530277.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:17.304Z,1520530277.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:17.689Z,1520530277.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:17.705Z,1520530277.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:18.093Z,1520530278.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:18.108Z,1520530278.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:18.497Z,1520530278.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:18.513Z,1520530278.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:18.893Z,1520530278.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:18.909Z,1520530278.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:19.288Z,1520530279.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:19.303Z,1520530279.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:19.690Z,1520530279.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:19.711Z,1520530279.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:20.090Z,1520530280.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:20.110Z,1520530280.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:20.488Z,1520530280.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:20.504Z,1520530280.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:20.893Z,1520530280.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:20.909Z,1520530280.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:21.293Z,1520530281.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:21.308Z,1520530281.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:21.693Z,1520530281.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:21.708Z,1520530281.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:22.081Z,1520530282.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:22.103Z,1520530282.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:22.487Z,1520530282.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:22.502Z,1520530282.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:22.893Z,1520530282.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:22.908Z,1520530282.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:23.287Z,1520530283.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:23.302Z,1520530283.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:23.687Z,1520530283.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:23.707Z,1520530283.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:24.094Z,1520530284.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:24.109Z,1520530284.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:24.498Z,1520530284.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:24.513Z,1520530284.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:24.893Z,1520530284.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:24.909Z,1520530284.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:25.291Z,1520530285.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:25.308Z,1520530285.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:25.684Z,1520530285.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:25.700Z,1520530285.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:26.092Z,1520530286.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:26.107Z,1520530286.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:26.490Z,1520530286.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:26.505Z,1520530286.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:26.894Z,1520530286.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:26.910Z,1520530286.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:27.294Z,1520530287.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:27.309Z,1520530287.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:27.693Z,1520530287.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:27.707Z,1520530287.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:28.085Z,1520530288.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:28.101Z,1520530288.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:28.486Z,1520530288.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:28.501Z,1520530288.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:28.887Z,1520530288.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:28.902Z,1520530288.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:29.284Z,1520530289.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:29.300Z,1520530289.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:29.683Z,1520530289.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:29.706Z,1520530289.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:30.096Z,1520530290.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:30.112Z,1520530290.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:30.495Z,1520530290.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:30.519Z,1520530290.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:30.900Z,1520530290.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:30.915Z,1520530290.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:31.285Z,1520530291.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:31.309Z,1520530291.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:31.676Z,1520530291.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:31.708Z,1520530291.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:32.091Z,1520530292.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:32.106Z,1520530292.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:32.478Z,1520530292.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:32.512Z,1520530292.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:32.898Z,1520530292.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:32.913Z,1520530292.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:33.300Z,1520530293.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:33.315Z,1520530293.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:33.695Z,1520530293.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:33.726Z,1520530293.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:34.076Z,1520530294.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:34.104Z,1520530294.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:34.482Z,1520530294.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:34.508Z,1520530294.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:34.878Z,1520530294.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:34.915Z,1520530294.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:35.273Z,1520530295.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:35.288Z,1520530295.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:35.682Z,1520530295.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:35.715Z,1520530295.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:36.102Z,1520530296.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:36.117Z,1520530296.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:36.489Z,1520530296.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:36.515Z,1520530296.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:36.889Z,1520530296.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:36.915Z,1520530296.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:37.278Z,1520530297.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:37.314Z,1520530297.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:37.677Z,1520530297.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:37.692Z,1520530297.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:38.083Z,1520530298.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:38.114Z,1520530298.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:38.478Z,1520530298.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:38.493Z,1520530298.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:38.893Z,1520530298.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:38.918Z,1520530298.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:39.297Z,1520530299.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:39.326Z,1520530299.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:39.697Z,1520530299.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:39.720Z,1520530299.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:40.076Z,1520530300.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:40.092Z,1520530300.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:40.486Z,1520530300.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:40.520Z,1520530300.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:40.886Z,1520530300.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:40.923Z,1520530300.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:41.277Z,1520530301.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:41.292Z,1520530301.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:41.686Z,1520530301.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:41.720Z,1520530301.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:42.089Z,1520530302.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:42.122Z,1520530302.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:42.497Z,1520530302.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:42.526Z,1520530302.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:42.897Z,1520530302.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:42.919Z,1520530302.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:43.283Z,1520530303.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:43.298Z,1520530303.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:43.676Z,1520530303.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:43.691Z,1520530303.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:44.087Z,1520530304.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:44.103Z,1520530304.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:44.486Z,1520530304.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:44.502Z,1520530304.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:44.897Z,1520530304.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:44.929Z,1520530304.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:45.301Z,1520530305.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:45.330Z,1520530305.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:45.701Z,1520530305.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:45.726Z,1520530305.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:48.786Z,1520530308.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:48.802Z,1520530308.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:48.904Z,1520530308.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:48.939Z,1520530308.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:49.298Z,1520530309.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:49.333Z,1520530309.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:49.684Z,1520530309.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:49.699Z,1520530309.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:50.089Z,1520530310.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:50.105Z,1520530310.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:50.482Z,1520530310.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:50.497Z,1520530310.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:50.882Z,1520530310.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:50.898Z,1520530310.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:51.279Z,1520530311.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:51.294Z,1520530311.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:51.678Z,1520530311.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:51.698Z,1520530311.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:52.085Z,1520530312.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:52.100Z,1520530312.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:52.485Z,1520530312.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:52.501Z,1520530312.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:52.884Z,1520530312.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:52.898Z,1520530312.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:53.272Z,1520530313.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:53.287Z,1520530313.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:53.675Z,1520530313.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:53.698Z,1520530313.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:54.081Z,1520530314.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:54.097Z,1520530314.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:54.483Z,1520530314.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:54.498Z,1520530314.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:54.888Z,1520530314.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:54.903Z,1520530314.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:55.289Z,1520530315.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:55.304Z,1520530315.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:55.685Z,1520530315.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:55.701Z,1520530315.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:56.082Z,1520530316.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:56.102Z,1520530316.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:56.144Z,1520530316.144 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T17:31:56.481Z,1520530316.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:56.496Z,1520530316.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:56.885Z,1520530316.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:56.901Z,1520530316.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:57.277Z,1520530317.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:57.297Z,1520530317.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:57.678Z,1520530317.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:57.693Z,1520530317.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:58.090Z,1520530318.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:58.105Z,1520530318.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:58.488Z,1520530318.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:58.503Z,1520530318.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:58.888Z,1520530318.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:58.904Z,1520530318.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:59.278Z,1520530319.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:59.293Z,1520530319.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:31:59.676Z,1520530319.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:31:59.707Z,1520530319.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:00.083Z,1520530320.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:00.098Z,1520530320.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:00.485Z,1520530320.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:00.500Z,1520530320.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:00.889Z,1520530320.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:00.905Z,1520530320.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:01.288Z,1520530321.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:01.310Z,1520530321.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:01.686Z,1520530321.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:01.713Z,1520530321.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:02.084Z,1520530322.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:02.099Z,1520530322.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:02.488Z,1520530322.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:02.502Z,1520530322.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:02.884Z,1520530322.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:02.900Z,1520530322.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:03.277Z,1520530323.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:03.299Z,1520530323.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:03.678Z,1520530323.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:03.705Z,1520530323.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:04.089Z,1520530324.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:04.106Z,1520530324.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:04.493Z,1520530324.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:04.508Z,1520530324.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:04.892Z,1520530324.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:04.907Z,1520530324.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:05.268Z,1520530325.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:05.296Z,1520530325.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:05.678Z,1520530325.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:05.693Z,1520530325.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:06.082Z,1520530326.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:06.097Z,1520530326.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:06.464Z,1520530326.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:06.496Z,1520530326.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:06.892Z,1520530326.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:06.908Z,1520530326.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:07.293Z,1520530327.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:07.307Z,1520530327.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:07.685Z,1520530327.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:07.701Z,1520530327.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:08.070Z,1520530328.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:08.102Z,1520530328.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:08.482Z,1520530328.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:08.497Z,1520530328.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:08.883Z,1520530328.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:08.898Z,1520530328.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:09.272Z,1520530329.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:09.299Z,1520530329.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:09.670Z,1520530329.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:09.695Z,1520530329.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:10.087Z,1520530330.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:10.108Z,1520530330.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:10.492Z,1520530330.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:10.508Z,1520530330.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:10.892Z,1520530330.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:10.907Z,1520530330.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:11.264Z,1520530331.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:11.297Z,1520530331.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:11.666Z,1520530331.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:11.698Z,1520530331.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:12.086Z,1520530332.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:12.101Z,1520530332.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:12.464Z,1520530332.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:12.488Z,1520530332.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:12.885Z,1520530332.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:12.907Z,1520530332.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:13.294Z,1520530333.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:13.308Z,1520530333.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:13.689Z,1520530333.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:13.708Z,1520530333.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:14.070Z,1520530334.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:14.102Z,1520530334.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:14.470Z,1520530334.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:14.501Z,1520530334.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:14.874Z,1520530334.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:14.901Z,1520530334.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:15.271Z,1520530335.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:15.299Z,1520530335.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:15.674Z,1520530335.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:15.706Z,1520530335.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:16.082Z,1520530336.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:16.109Z,1520530336.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:16.493Z,1520530336.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:16.509Z,1520530336.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:16.881Z,1520530336.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:16.910Z,1520530336.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:17.264Z,1520530337.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:17.280Z,1520530337.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:17.670Z,1520530337.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:17.707Z,1520530337.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:18.071Z,1520530338.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:18.086Z,1520530338.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:18.471Z,1520530338.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:18.487Z,1520530338.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:18.889Z,1520530338.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:18.913Z,1520530338.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:19.289Z,1520530339.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:19.312Z,1520530339.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:19.685Z,1520530339.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:19.717Z,1520530339.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:20.078Z,1520530340.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:20.099Z,1520530340.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:20.479Z,1520530340.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:20.494Z,1520530340.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:20.876Z,1520530340.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:20.892Z,1520530340.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:21.280Z,1520530341.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:21.302Z,1520530341.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:21.680Z,1520530341.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:21.695Z,1520530341.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:22.081Z,1520530342.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:22.097Z,1520530342.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:22.493Z,1520530342.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:22.508Z,1520530342.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:22.886Z,1520530342.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:22.901Z,1520530342.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:23.277Z,1520530343.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:23.292Z,1520530343.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:23.668Z,1520530343.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:23.701Z,1520530343.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:24.082Z,1520530344.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:24.097Z,1520530344.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:24.482Z,1520530344.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:24.498Z,1520530344.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:24.885Z,1520530344.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:24.902Z,1520530344.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:25.289Z,1520530345.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:25.311Z,1520530345.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:25.685Z,1520530345.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:25.700Z,1520530345.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:26.078Z,1520530346.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:26.098Z,1520530346.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:26.482Z,1520530346.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:26.497Z,1520530346.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:26.875Z,1520530346.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:26.890Z,1520530346.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:27.279Z,1520530347.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:27.294Z,1520530347.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:27.679Z,1520530347.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:27.695Z,1520530347.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:28.084Z,1520530348.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:28.100Z,1520530348.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:28.485Z,1520530348.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:28.500Z,1520530348.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:28.884Z,1520530348.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:28.899Z,1520530348.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:29.277Z,1520530349.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:29.292Z,1520530349.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:29.678Z,1520530349.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:29.698Z,1520530349.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:30.082Z,1520530350.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:30.097Z,1520530350.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:30.479Z,1520530350.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:30.494Z,1520530350.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:30.885Z,1520530350.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:30.901Z,1520530350.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:31.297Z,1520530351.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:31.312Z,1520530351.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:31.688Z,1520530351.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:31.705Z,1520530351.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:32.078Z,1520530352.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:32.098Z,1520530352.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:32.477Z,1520530352.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:32.497Z,1520530352.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:32.878Z,1520530352.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:32.894Z,1520530352.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:33.275Z,1520530353.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:33.298Z,1520530353.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:33.675Z,1520530353.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:33.696Z,1520530353.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:34.088Z,1520530354.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:34.104Z,1520530354.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:34.490Z,1520530354.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:34.505Z,1520530354.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:34.886Z,1520530354.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:34.906Z,1520530354.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:35.283Z,1520530355.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:35.299Z,1520530355.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:35.678Z,1520530355.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:35.693Z,1520530355.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:36.075Z,1520530356.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:36.097Z,1520530356.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:36.475Z,1520530356.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:36.492Z,1520530356.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:36.889Z,1520530356.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:36.905Z,1520530356.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:37.289Z,1520530357.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:37.305Z,1520530357.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:37.689Z,1520530357.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:37.704Z,1520530357.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:38.080Z,1520530358.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:38.102Z,1520530358.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:38.479Z,1520530358.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:38.494Z,1520530358.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:38.880Z,1520530358.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:38.896Z,1520530358.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:39.277Z,1520530359.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:39.300Z,1520530359.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:39.684Z,1520530359.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:39.699Z,1520530359.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:40.088Z,1520530360.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:40.103Z,1520530360.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:40.494Z,1520530360.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:40.509Z,1520530360.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:40.891Z,1520530360.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:40.906Z,1520530360.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:41.266Z,1520530361.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:41.305Z,1520530361.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:41.666Z,1520530361.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:41.708Z,1520530361.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:42.083Z,1520530362.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:42.099Z,1520530362.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:42.466Z,1520530362.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:42.501Z,1520530362.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:42.881Z,1520530362.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:42.913Z,1520530362.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:43.288Z,1520530363.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:43.304Z,1520530363.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:43.686Z,1520530363.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:43.702Z,1520530363.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:44.071Z,1520530364.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:44.108Z,1520530364.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:44.474Z,1520530364.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:44.499Z,1520530364.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:44.866Z,1520530364.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:44.894Z,1520530364.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:45.275Z,1520530365.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:45.301Z,1520530365.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:45.665Z,1520530365.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:45.701Z,1520530365.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:46.080Z,1520530366.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:46.109Z,1520530366.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:49.190Z,1520530369.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:49.205Z,1520530369.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:49.317Z,1520530369.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:49.345Z,1520530369.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:49.658Z,1520530369.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:49.678Z,1520530369.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:50.060Z,1520530370.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:50.075Z,1520530370.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:50.456Z,1520530370.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:50.472Z,1520530370.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:50.866Z,1520530370.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:50.882Z,1520530370.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:51.273Z,1520530371.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:51.288Z,1520530371.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:51.660Z,1520530371.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:51.679Z,1520530371.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:52.059Z,1520530372.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:52.075Z,1520530372.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:52.459Z,1520530372.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:52.474Z,1520530372.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:52.859Z,1520530372.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:52.875Z,1520530372.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:53.260Z,1520530373.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:53.275Z,1520530373.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:53.660Z,1520530373.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:53.675Z,1520530373.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:54.074Z,1520530374.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:54.105Z,1520530374.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:54.469Z,1520530374.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:54.485Z,1520530374.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:54.865Z,1520530374.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:54.880Z,1520530374.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:55.256Z,1520530375.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:55.271Z,1520530375.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:55.658Z,1520530375.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:55.678Z,1520530375.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:56.055Z,1520530376.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:56.070Z,1520530376.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:56.462Z,1520530376.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:56.478Z,1520530376.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:56.863Z,1520530376.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:56.879Z,1520530376.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:57.264Z,1520530377.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:57.279Z,1520530377.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:57.664Z,1520530377.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:57.679Z,1520530377.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:58.062Z,1520530378.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:58.077Z,1520530378.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:58.464Z,1520530378.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:58.479Z,1520530378.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:58.849Z,1520530378.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:58.872Z,1520530378.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:59.255Z,1520530379.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:59.277Z,1520530379.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:32:59.659Z,1520530379.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:32:59.674Z,1520530379.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:00.086Z,1520530380.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:00.130Z,1520530380.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:00.485Z,1520530380.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:00.528Z,1520530380.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:00.864Z,1520530380.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:00.879Z,1520530380.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:01.249Z,1520530381.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:01.271Z,1520530381.271 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:01.271Z,1520530381.271 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 196
2018-03-08T17:33:01.271Z,1520530381.271 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T17:33:01.273Z,1520530381.273 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:01.273Z,1520530381.273 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 196
2018-03-08T17:33:01.273Z,1520530381.273 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T17:33:01.275Z,1520530381.275 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:01.275Z,1520530381.275 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 196
2018-03-08T17:33:01.275Z,1520530381.275 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T17:33:01.287Z,1520530381.287 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T17:33:01.287Z,1520530381.287 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T17:33:01.287Z,1520530381.287 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T17:33:01.668Z,1520530381.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:01.693Z,1520530381.693 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T17:33:01.693Z,1520530381.693 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 196
2018-03-08T17:33:01.694Z,1520530381.694 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T17:33:01.694Z,1520530381.694 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 196
2018-03-08T17:33:01.694Z,1520530381.694 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T17:33:01.694Z,1520530381.694 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 196
2018-03-08T17:33:02.047Z,1520530382.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:02.080Z,1520530382.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T17:33:02.080Z,1520530382.080 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:33:02.080Z,1520530382.080 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:33:02.081Z,1520530382.081 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T17:33:02.081Z,1520530382.081 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:33:02.082Z,1520530382.082 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:33:02.082Z,1520530382.082 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T17:33:02.082Z,1520530382.082 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:33:02.083Z,1520530382.083 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:33:02.446Z,1520530382.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:02.478Z,1520530382.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T17:33:02.478Z,1520530382.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:02.866Z,1520530382.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:02.895Z,1520530382.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T17:33:02.895Z,1520530382.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:03.276Z,1520530383.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:03.291Z,1520530383.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T17:33:03.291Z,1520530383.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:03.662Z,1520530383.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:03.683Z,1520530383.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T17:33:03.684Z,1520530383.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:04.050Z,1520530384.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:04.097Z,1520530384.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T17:33:04.098Z,1520530384.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:04.458Z,1520530384.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:04.473Z,1520530384.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T17:33:04.474Z,1520530384.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:04.851Z,1520530384.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:04.866Z,1520530384.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T17:33:04.867Z,1520530384.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:05.259Z,1520530385.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:05.275Z,1520530385.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T17:33:05.276Z,1520530385.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:05.658Z,1520530385.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:05.673Z,1520530385.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T17:33:05.674Z,1520530385.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:06.073Z,1520530386.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:06.095Z,1520530386.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T17:33:06.096Z,1520530386.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:06.469Z,1520530386.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:06.496Z,1520530386.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T17:33:06.498Z,1520530386.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:06.873Z,1520530386.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:06.902Z,1520530386.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T17:33:06.903Z,1520530386.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:07.247Z,1520530387.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:07.275Z,1520530387.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T17:33:07.275Z,1520530387.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:07.658Z,1520530387.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:07.678Z,1520530387.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T17:33:07.679Z,1520530387.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:08.061Z,1520530388.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:08.075Z,1520530388.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T17:33:08.076Z,1520530388.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:08.459Z,1520530388.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:08.475Z,1520530388.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T17:33:08.476Z,1520530388.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:08.874Z,1520530388.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:08.902Z,1520530388.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T17:33:08.903Z,1520530388.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:09.281Z,1520530389.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:09.307Z,1520530389.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T17:33:09.308Z,1520530389.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:09.664Z,1520530389.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:09.679Z,1520530389.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T17:33:09.680Z,1520530389.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:10.063Z,1520530390.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:10.078Z,1520530390.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T17:33:10.079Z,1520530390.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:10.462Z,1520530390.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:10.477Z,1520530390.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T17:33:10.478Z,1520530390.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:10.855Z,1520530390.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:10.874Z,1520530390.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T17:33:10.875Z,1520530390.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:11.262Z,1520530391.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:11.277Z,1520530391.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T17:33:11.278Z,1520530391.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:11.662Z,1520530391.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:11.677Z,1520530391.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T17:33:11.678Z,1520530391.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:12.063Z,1520530392.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:12.079Z,1520530392.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T17:33:12.080Z,1520530392.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:12.469Z,1520530392.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:12.484Z,1520530392.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T17:33:12.485Z,1520530392.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:12.865Z,1520530392.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:12.886Z,1520530392.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T17:33:12.887Z,1520530392.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:13.248Z,1520530393.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:13.278Z,1520530393.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T17:33:13.279Z,1520530393.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:13.659Z,1520530393.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:13.674Z,1520530393.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T17:33:13.675Z,1520530393.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:14.056Z,1520530394.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:14.071Z,1520530394.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T17:33:14.072Z,1520530394.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:14.463Z,1520530394.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:14.479Z,1520530394.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T17:33:14.480Z,1520530394.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:14.865Z,1520530394.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:14.881Z,1520530394.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T17:33:14.882Z,1520530394.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:15.265Z,1520530395.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:15.279Z,1520530395.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T17:33:15.280Z,1520530395.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:15.666Z,1520530395.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:15.681Z,1520530395.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T17:33:15.682Z,1520530395.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:16.063Z,1520530396.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:16.078Z,1520530396.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T17:33:16.079Z,1520530396.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:16.460Z,1520530396.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:16.475Z,1520530396.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T17:33:16.476Z,1520530396.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:16.862Z,1520530396.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:16.877Z,1520530396.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T17:33:16.878Z,1520530396.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:17.264Z,1520530397.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:17.279Z,1520530397.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T17:33:17.280Z,1520530397.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:17.661Z,1520530397.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:17.676Z,1520530397.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T17:33:17.677Z,1520530397.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:18.063Z,1520530398.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:18.087Z,1520530398.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T17:33:18.088Z,1520530398.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:18.469Z,1520530398.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:18.483Z,1520530398.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T17:33:18.485Z,1520530398.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:18.869Z,1520530398.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:18.884Z,1520530398.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T17:33:18.885Z,1520530398.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:19.256Z,1520530399.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:19.274Z,1520530399.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T17:33:19.275Z,1520530399.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:19.657Z,1520530399.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:19.678Z,1520530399.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T17:33:19.679Z,1520530399.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:20.063Z,1520530400.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:20.079Z,1520530400.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T17:33:20.080Z,1520530400.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:20.448Z,1520530400.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:20.481Z,1520530400.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T17:33:20.482Z,1520530400.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:20.876Z,1520530400.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:20.941Z,1520530400.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T17:33:20.942Z,1520530400.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:21.276Z,1520530401.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:21.292Z,1520530401.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:21.658Z,1520530401.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:21.674Z,1520530401.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:22.050Z,1520530402.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:22.071Z,1520530402.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:22.454Z,1520530402.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:22.469Z,1520530402.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:22.848Z,1520530402.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:22.864Z,1520530402.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:23.252Z,1520530403.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:23.267Z,1520530403.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:23.656Z,1520530403.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:23.718Z,1520530403.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:24.065Z,1520530404.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:24.086Z,1520530404.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:24.465Z,1520530404.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:24.486Z,1520530404.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:24.857Z,1520530404.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:24.872Z,1520530404.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:25.244Z,1520530405.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:25.259Z,1520530405.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:25.652Z,1520530405.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:25.705Z,1520530405.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:26.047Z,1520530406.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:26.086Z,1520530406.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:26.451Z,1520530406.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:26.467Z,1520530406.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:26.865Z,1520530406.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:26.895Z,1520530406.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:27.269Z,1520530407.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:27.291Z,1520530407.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:27.665Z,1520530407.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:27.691Z,1520530407.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:28.055Z,1520530408.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:28.071Z,1520530408.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:28.459Z,1520530408.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:28.474Z,1520530408.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:28.851Z,1520530408.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:28.867Z,1520530408.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:29.259Z,1520530409.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:29.275Z,1520530409.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:29.658Z,1520530409.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:29.673Z,1520530409.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:30.065Z,1520530410.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:30.100Z,1520530410.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:30.469Z,1520530410.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:30.500Z,1520530410.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:30.877Z,1520530410.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:30.902Z,1520530410.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:31.252Z,1520530411.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:31.267Z,1520530411.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:31.655Z,1520530411.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:31.671Z,1520530411.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:32.052Z,1520530412.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:32.067Z,1520530412.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:32.458Z,1520530412.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:32.475Z,1520530412.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:32.869Z,1520530412.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:32.899Z,1520530412.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:33.269Z,1520530413.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:33.296Z,1520530413.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:33.661Z,1520530413.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:33.677Z,1520530413.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:34.060Z,1520530414.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:34.075Z,1520530414.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:34.455Z,1520530414.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:34.470Z,1520530414.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:34.855Z,1520530414.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:34.871Z,1520530414.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:35.256Z,1520530415.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:35.273Z,1520530415.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:35.658Z,1520530415.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:35.673Z,1520530415.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:36.073Z,1520530416.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:36.095Z,1520530416.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:36.469Z,1520530416.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:36.501Z,1520530416.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:36.872Z,1520530416.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:36.905Z,1520530416.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:37.256Z,1520530417.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:37.271Z,1520530417.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:37.659Z,1520530417.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:37.675Z,1520530417.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:38.060Z,1520530418.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:38.076Z,1520530418.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:38.456Z,1520530418.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:38.482Z,1520530418.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:38.873Z,1520530418.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:38.903Z,1520530418.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:39.273Z,1520530419.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:39.303Z,1520530419.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:39.661Z,1520530419.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:39.677Z,1520530419.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:40.060Z,1520530420.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:40.076Z,1520530420.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:40.458Z,1520530420.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:40.474Z,1520530420.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:40.860Z,1520530420.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:40.875Z,1520530420.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:41.260Z,1520530421.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:41.276Z,1520530421.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:41.656Z,1520530421.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:41.683Z,1520530421.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:42.067Z,1520530422.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:42.090Z,1520530422.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:42.469Z,1520530422.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:42.485Z,1520530422.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:42.873Z,1520530422.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:42.895Z,1520530422.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:43.244Z,1520530423.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:43.275Z,1520530423.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:43.657Z,1520530423.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:43.677Z,1520530423.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:44.057Z,1520530424.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:44.078Z,1520530424.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:44.462Z,1520530424.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:44.477Z,1520530424.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:44.481Z,1520530424.481 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T17:28:44.2Z
2018-03-08T17:33:44.481Z,1520530424.481 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T17:33:44.481Z,1520530424.481 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T17:33:44.870Z,1520530424.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:44.885Z,1520530424.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:45.367Z,1520530425.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:45.386Z,1520530425.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:45.669Z,1520530425.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:45.685Z,1520530425.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:48.769Z,1520530428.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:48.785Z,1520530428.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:48.883Z,1520530428.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:48.922Z,1520530428.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:49.217Z,1520530429.217 [DataOverHttps](INFO): Sending 103 bytes from file Logs/20180308T074127/Courier0228.lzma
2018-03-08T17:33:49.263Z,1520530429.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:49.279Z,1520530429.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:49.650Z,1520530429.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:49.673Z,1520530429.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:50.019Z,1520530430.019 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0228.lzma.bak
2018-03-08T17:33:50.020Z,1520530430.020 [DataOverHttps](INFO): SBD MOMSN=7987707
2018-03-08T17:33:50.067Z,1520530430.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:50.086Z,1520530430.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:50.625Z,1520530430.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:50.640Z,1520530430.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:50.835Z,1520530430.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:50.875Z,1520530430.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:53.946Z,1520530433.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:53.969Z,1520530433.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:54.064Z,1520530434.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:54.111Z,1520530434.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:54.437Z,1520530434.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:54.470Z,1520530434.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:54.834Z,1520530434.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:54.849Z,1520530434.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:55.242Z,1520530435.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:55.275Z,1520530435.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:55.627Z,1520530435.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:55.643Z,1520530435.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:56.024Z,1520530436.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:56.040Z,1520530436.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:59.422Z,1520530439.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:59.438Z,1520530439.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:59.578Z,1520530439.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:59.617Z,1520530439.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:33:59.873Z,1520530439.873 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0229.lzma
2018-03-08T17:33:59.917Z,1520530439.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:33:59.933Z,1520530439.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:00.296Z,1520530440.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:00.330Z,1520530440.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:00.665Z,1520530440.665 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0229.lzma.bak
2018-03-08T17:34:00.665Z,1520530440.665 [DataOverHttps](INFO): SBD MOMSN=7987711
2018-03-08T17:34:00.703Z,1520530440.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:00.735Z,1520530440.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:01.280Z,1520530441.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:01.296Z,1520530441.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:01.299Z,1520530441.299 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T17:34:01.299Z,1520530441.299 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T17:34:01.299Z,1520530441.299 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T17:34:01.490Z,1520530441.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:01.527Z,1520530441.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:04.606Z,1520530444.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:04.629Z,1520530444.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:04.741Z,1520530444.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:04.779Z,1520530444.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:05.101Z,1520530445.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:05.131Z,1520530445.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:05.483Z,1520530445.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:05.498Z,1520530445.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:05.888Z,1520530445.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:05.903Z,1520530445.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:06.284Z,1520530446.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:06.300Z,1520530446.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:06.682Z,1520530446.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:06.697Z,1520530446.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:07.102Z,1520530447.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:07.130Z,1520530447.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:07.489Z,1520530447.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:07.505Z,1520530447.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:07.897Z,1520530447.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:07.930Z,1520530447.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:08.284Z,1520530448.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:08.299Z,1520530448.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:08.683Z,1520530448.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:08.699Z,1520530448.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:09.085Z,1520530449.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:09.100Z,1520530449.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:09.484Z,1520530449.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:09.499Z,1520530449.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:09.897Z,1520530449.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:09.933Z,1520530449.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:10.297Z,1520530450.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:10.312Z,1520530450.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:10.689Z,1520530450.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:10.710Z,1520530450.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:11.086Z,1520530451.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:11.102Z,1520530451.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:11.486Z,1520530451.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:11.501Z,1520530451.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:11.887Z,1520530451.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:11.902Z,1520530451.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:12.286Z,1520530452.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:12.301Z,1520530452.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:12.687Z,1520530452.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:12.701Z,1520530452.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:13.087Z,1520530453.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:13.103Z,1520530453.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:13.493Z,1520530453.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:13.509Z,1520530453.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:13.889Z,1520530453.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:13.904Z,1520530453.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:14.286Z,1520530454.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:14.301Z,1520530454.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:14.683Z,1520530454.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:14.698Z,1520530454.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:15.079Z,1520530455.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:15.103Z,1520530455.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:15.487Z,1520530455.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:15.503Z,1520530455.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:15.888Z,1520530455.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:15.905Z,1520530455.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:16.292Z,1520530456.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:16.307Z,1520530456.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:16.690Z,1520530456.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:16.705Z,1520530456.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:17.083Z,1520530457.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:17.098Z,1520530457.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:17.485Z,1520530457.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:17.500Z,1520530457.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:17.882Z,1520530457.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:17.906Z,1520530457.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:18.285Z,1520530458.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:18.301Z,1520530458.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:18.693Z,1520530458.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:18.708Z,1520530458.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:19.089Z,1520530459.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:19.105Z,1520530459.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:19.493Z,1520530459.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:19.508Z,1520530459.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:19.894Z,1520530459.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:19.909Z,1520530459.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:20.282Z,1520530460.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:20.302Z,1520530460.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:20.678Z,1520530460.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:20.703Z,1520530460.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:21.088Z,1520530461.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:21.104Z,1520530461.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:21.472Z,1520530461.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:21.508Z,1520530461.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:21.897Z,1520530461.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:21.913Z,1520530461.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:22.291Z,1520530462.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:22.319Z,1520530462.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:22.686Z,1520530462.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:22.709Z,1520530462.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:23.086Z,1520530463.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:23.104Z,1520530463.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:23.471Z,1520530463.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:23.503Z,1520530463.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:23.886Z,1520530463.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:23.905Z,1520530463.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:24.275Z,1520530464.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:24.311Z,1520530464.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:24.678Z,1520530464.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:24.704Z,1520530464.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:25.091Z,1520530465.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:25.120Z,1520530465.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:25.501Z,1520530465.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:25.517Z,1520530465.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:25.891Z,1520530465.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:25.915Z,1520530465.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:26.274Z,1520530466.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:26.307Z,1520530466.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:26.678Z,1520530466.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:26.710Z,1520530466.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:27.071Z,1520530467.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:27.113Z,1520530467.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:27.468Z,1520530467.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:27.483Z,1520530467.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:27.885Z,1520530467.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:27.911Z,1520530467.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:28.289Z,1520530468.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:28.323Z,1520530468.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:28.681Z,1520530468.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:28.713Z,1520530468.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:29.078Z,1520530469.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:29.119Z,1520530469.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:29.479Z,1520530469.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:29.519Z,1520530469.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:29.871Z,1520530469.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:29.887Z,1520530469.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:30.284Z,1520530470.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:30.315Z,1520530470.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:30.675Z,1520530470.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:30.690Z,1520530470.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:31.093Z,1520530471.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:31.117Z,1520530471.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:31.493Z,1520530471.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:31.515Z,1520530471.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:31.885Z,1520530471.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:31.916Z,1520530471.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:32.268Z,1520530472.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:32.283Z,1520530472.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:32.695Z,1520530472.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:32.787Z,1520530472.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:33.076Z,1520530473.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:33.091Z,1520530473.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:33.468Z,1520530473.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:33.483Z,1520530473.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:33.893Z,1520530473.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:33.909Z,1520530473.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:34.293Z,1520530474.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:34.307Z,1520530474.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:34.682Z,1520530474.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:34.746Z,1520530474.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:35.077Z,1520530475.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:35.092Z,1520530475.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:35.476Z,1520530475.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:35.490Z,1520530475.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:35.887Z,1520530475.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:35.915Z,1520530475.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:36.291Z,1520530476.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:36.322Z,1520530476.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:36.683Z,1520530476.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:36.698Z,1520530476.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:37.085Z,1520530477.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:37.101Z,1520530477.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:37.497Z,1520530477.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:37.527Z,1520530477.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:37.889Z,1520530477.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:37.927Z,1520530477.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:38.279Z,1520530478.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:38.295Z,1520530478.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:38.683Z,1520530478.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:38.699Z,1520530478.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:39.080Z,1520530479.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:39.094Z,1520530479.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:39.479Z,1520530479.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:39.498Z,1520530479.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:39.897Z,1520530479.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:39.927Z,1520530479.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:40.297Z,1520530480.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:40.328Z,1520530480.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:40.681Z,1520530480.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:40.697Z,1520530480.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:41.079Z,1520530481.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:41.099Z,1520530481.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:41.483Z,1520530481.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:41.502Z,1520530481.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:41.879Z,1520530481.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:41.896Z,1520530481.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:42.282Z,1520530482.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:42.297Z,1520530482.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:42.683Z,1520530482.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:42.698Z,1520530482.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:43.081Z,1520530483.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:43.097Z,1520530483.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:43.497Z,1520530483.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:43.527Z,1520530483.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:43.889Z,1520530483.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:43.928Z,1520530483.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:44.279Z,1520530484.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:44.295Z,1520530484.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:44.680Z,1520530484.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:44.696Z,1520530484.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:45.080Z,1520530485.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:45.095Z,1520530485.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:45.478Z,1520530485.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:45.497Z,1520530485.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:45.893Z,1520530485.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:45.908Z,1520530485.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:46.297Z,1520530486.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:46.312Z,1520530486.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:46.683Z,1520530486.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:46.699Z,1520530486.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:47.083Z,1520530487.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:47.099Z,1520530487.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:47.483Z,1520530487.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:47.498Z,1520530487.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:47.883Z,1520530487.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:47.899Z,1520530487.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:48.284Z,1520530488.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:48.299Z,1520530488.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:48.682Z,1520530488.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:48.697Z,1520530488.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:49.085Z,1520530489.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:49.101Z,1520530489.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:49.490Z,1520530489.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:49.511Z,1520530489.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:49.888Z,1520530489.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:49.903Z,1520530489.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:50.285Z,1520530490.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:50.301Z,1520530490.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:50.682Z,1520530490.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:50.697Z,1520530490.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:51.083Z,1520530491.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:51.098Z,1520530491.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:51.480Z,1520530491.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:51.496Z,1520530491.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:51.887Z,1520530491.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:51.903Z,1520530491.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:52.289Z,1520530492.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:52.304Z,1520530492.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:52.685Z,1520530492.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:52.713Z,1520530492.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:53.086Z,1520530493.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:53.106Z,1520530493.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:53.487Z,1520530493.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:53.502Z,1520530493.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:53.887Z,1520530493.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:53.910Z,1520530493.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:54.289Z,1520530494.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:54.304Z,1520530494.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:54.684Z,1520530494.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:54.698Z,1520530494.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:55.090Z,1520530495.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:55.118Z,1520530495.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:55.496Z,1520530495.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:55.511Z,1520530495.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:55.897Z,1520530495.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:55.912Z,1520530495.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:56.288Z,1520530496.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:56.310Z,1520530496.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:56.684Z,1520530496.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:56.699Z,1520530496.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:57.089Z,1520530497.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:57.104Z,1520530497.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:57.481Z,1520530497.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:57.509Z,1520530497.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:57.899Z,1520530497.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:57.914Z,1520530497.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:58.299Z,1520530498.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:58.315Z,1520530498.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:58.690Z,1520530498.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:58.714Z,1520530498.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:59.079Z,1520530499.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:59.116Z,1520530499.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:59.474Z,1520530499.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:59.514Z,1520530499.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:34:59.877Z,1520530499.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:34:59.913Z,1520530499.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:00.275Z,1520530500.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:00.307Z,1520530500.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:00.678Z,1520530500.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:00.719Z,1520530500.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:01.086Z,1520530501.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:01.122Z,1520530501.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:01.489Z,1520530501.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:01.523Z,1520530501.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:01.884Z,1520530501.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:01.915Z,1520530501.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:04.975Z,1520530504.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:05.009Z,1520530505.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:05.084Z,1520530505.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:05.120Z,1520530505.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:05.489Z,1520530505.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:05.512Z,1520530505.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:05.886Z,1520530505.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:05.917Z,1520530505.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:06.289Z,1520530506.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:06.320Z,1520530506.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:06.675Z,1520530506.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:06.690Z,1520530506.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:07.071Z,1520530507.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:07.094Z,1520530507.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:07.475Z,1520530507.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:07.491Z,1520530507.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:07.880Z,1520530507.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:07.896Z,1520530507.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:08.289Z,1520530508.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:08.319Z,1520530508.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:08.689Z,1520530508.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:08.720Z,1520530508.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:09.073Z,1520530509.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:09.088Z,1520530509.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:09.476Z,1520530509.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:09.498Z,1520530509.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:09.876Z,1520530509.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:09.891Z,1520530509.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:10.276Z,1520530510.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:10.290Z,1520530510.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:10.671Z,1520530510.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:10.687Z,1520530510.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:11.077Z,1520530511.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:11.093Z,1520530511.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:11.489Z,1520530511.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:11.504Z,1520530511.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:11.889Z,1520530511.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:11.921Z,1520530511.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:12.278Z,1520530512.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:12.293Z,1520530512.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:12.675Z,1520530512.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:12.690Z,1520530512.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:13.077Z,1520530513.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:13.093Z,1520530513.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:13.479Z,1520530513.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:13.494Z,1520530513.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:13.880Z,1520530513.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:13.895Z,1520530513.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:14.285Z,1520530514.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:14.300Z,1520530514.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:14.681Z,1520530514.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:14.697Z,1520530514.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:15.078Z,1520530515.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:15.093Z,1520530515.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:15.472Z,1520530515.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:15.507Z,1520530515.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:15.878Z,1520530515.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:15.893Z,1520530515.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:16.279Z,1520530516.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:16.294Z,1520530516.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:16.671Z,1520530516.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:16.690Z,1520530516.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:17.079Z,1520530517.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:17.095Z,1520530517.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:17.486Z,1520530517.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:17.500Z,1520530517.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:17.879Z,1520530517.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:17.902Z,1520530517.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:18.277Z,1520530518.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:18.292Z,1520530518.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:18.675Z,1520530518.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:18.694Z,1520530518.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:19.073Z,1520530519.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:19.092Z,1520530519.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:19.474Z,1520530519.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:19.494Z,1520530519.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:19.881Z,1520530519.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:19.896Z,1520530519.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:20.285Z,1520530520.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:20.300Z,1520530520.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:20.681Z,1520530520.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:20.697Z,1520530520.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:21.079Z,1520530521.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:21.094Z,1520530521.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:21.471Z,1520530521.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:21.487Z,1520530521.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:21.874Z,1520530521.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:21.889Z,1520530521.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:22.280Z,1520530522.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:22.296Z,1520530522.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:22.669Z,1520530522.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:22.690Z,1520530522.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:23.081Z,1520530523.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:23.097Z,1520530523.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:23.485Z,1520530523.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:23.501Z,1520530523.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:23.882Z,1520530523.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:23.897Z,1520530523.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:24.278Z,1520530524.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:24.293Z,1520530524.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:24.675Z,1520530524.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:24.690Z,1520530524.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:25.079Z,1520530525.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:25.094Z,1520530525.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:25.477Z,1520530525.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:25.493Z,1520530525.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:25.881Z,1520530525.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:25.897Z,1520530525.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:26.285Z,1520530526.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:26.300Z,1520530526.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:26.682Z,1520530526.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:26.702Z,1520530526.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:27.074Z,1520530527.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:27.090Z,1520530527.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:27.469Z,1520530527.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:27.492Z,1520530527.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:27.882Z,1520530527.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:27.903Z,1520530527.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:28.280Z,1520530528.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:28.295Z,1520530528.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:28.669Z,1520530528.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:28.692Z,1520530528.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:29.085Z,1520530529.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:29.100Z,1520530529.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:29.488Z,1520530529.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:29.503Z,1520530529.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:29.889Z,1520530529.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:29.905Z,1520530529.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:30.278Z,1520530530.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:30.298Z,1520530530.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:30.675Z,1520530530.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:30.691Z,1520530530.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:31.071Z,1520530531.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:31.094Z,1520530531.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:31.478Z,1520530531.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:31.493Z,1520530531.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:31.890Z,1520530531.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:31.910Z,1520530531.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:32.288Z,1520530532.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:32.310Z,1520530532.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:32.688Z,1520530532.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:32.703Z,1520530532.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:33.068Z,1520530533.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:33.083Z,1520530533.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:33.467Z,1520530533.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:33.495Z,1520530533.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:33.874Z,1520530533.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:33.897Z,1520530533.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:34.281Z,1520530534.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:34.296Z,1520530534.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:34.677Z,1520530534.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:34.692Z,1520530534.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:35.082Z,1520530535.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:35.097Z,1520530535.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:35.482Z,1520530535.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:35.503Z,1520530535.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:35.881Z,1520530535.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:35.896Z,1520530535.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:36.277Z,1520530536.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:36.292Z,1520530536.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:36.681Z,1520530536.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:36.696Z,1520530536.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:37.079Z,1520530537.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:37.095Z,1520530537.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:37.479Z,1520530537.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:37.494Z,1520530537.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:37.882Z,1520530537.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:37.898Z,1520530537.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:38.282Z,1520530538.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:38.298Z,1520530538.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:38.682Z,1520530538.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:38.699Z,1520530538.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:39.078Z,1520530539.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:39.094Z,1520530539.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:39.475Z,1520530539.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:39.491Z,1520530539.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:39.878Z,1520530539.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:39.894Z,1520530539.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:40.275Z,1520530540.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:40.290Z,1520530540.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:40.678Z,1520530540.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:40.693Z,1520530540.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:41.081Z,1520530541.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:41.097Z,1520530541.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:41.485Z,1520530541.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:41.500Z,1520530541.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:41.881Z,1520530541.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:41.897Z,1520530541.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:42.274Z,1520530542.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:42.290Z,1520530542.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:42.678Z,1520530542.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:42.693Z,1520530542.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:43.075Z,1520530543.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:43.090Z,1520530543.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:43.474Z,1520530543.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:43.490Z,1520530543.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:43.881Z,1520530543.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:43.896Z,1520530543.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:44.285Z,1520530544.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:44.300Z,1520530544.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:44.681Z,1520530544.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:44.697Z,1520530544.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:45.078Z,1520530545.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:45.093Z,1520530545.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:45.478Z,1520530545.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:45.493Z,1520530545.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:45.874Z,1520530545.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:45.889Z,1520530545.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:46.276Z,1520530546.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:46.291Z,1520530546.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:46.678Z,1520530546.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:46.693Z,1520530546.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:47.081Z,1520530547.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:47.097Z,1520530547.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:47.485Z,1520530547.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:47.500Z,1520530547.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:47.881Z,1520530547.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:47.897Z,1520530547.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:48.278Z,1520530548.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:48.294Z,1520530548.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:48.677Z,1520530548.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:48.692Z,1520530548.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:49.078Z,1520530549.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:49.098Z,1520530549.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:49.477Z,1520530549.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:49.493Z,1520530549.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:49.881Z,1520530549.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:49.896Z,1520530549.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:50.285Z,1520530550.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:50.301Z,1520530550.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:50.681Z,1520530550.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:50.697Z,1520530550.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:51.080Z,1520530551.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:51.094Z,1520530551.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:51.478Z,1520530551.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:51.493Z,1520530551.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:51.874Z,1520530551.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:51.895Z,1520530551.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:52.278Z,1520530552.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:52.293Z,1520530552.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:52.678Z,1520530552.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:52.694Z,1520530552.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:53.082Z,1520530553.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:53.098Z,1520530553.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:53.485Z,1520530553.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:53.500Z,1520530553.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:53.881Z,1520530553.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:53.897Z,1520530553.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:54.278Z,1520530554.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:54.293Z,1520530554.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:54.678Z,1520530554.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:54.693Z,1520530554.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:55.078Z,1520530555.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:55.094Z,1520530555.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:55.474Z,1520530555.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:55.494Z,1520530555.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:55.881Z,1520530555.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:55.896Z,1520530555.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:56.285Z,1520530556.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:56.300Z,1520530556.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:56.681Z,1520530556.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:56.697Z,1520530556.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:57.078Z,1520530557.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:57.093Z,1520530557.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:57.478Z,1520530557.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:57.493Z,1520530557.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:57.875Z,1520530557.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:57.890Z,1520530557.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:58.279Z,1520530558.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:58.294Z,1520530558.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:58.678Z,1520530558.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:58.698Z,1520530558.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:59.081Z,1520530559.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:59.097Z,1520530559.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:59.485Z,1520530559.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:59.500Z,1520530559.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:35:59.881Z,1520530559.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:35:59.898Z,1520530559.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:00.278Z,1520530560.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:00.293Z,1520530560.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:00.679Z,1520530560.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:00.693Z,1520530560.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:01.078Z,1520530561.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:01.098Z,1520530561.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:01.475Z,1520530561.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:01.491Z,1520530561.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:01.881Z,1520530561.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:01.896Z,1520530561.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:02.285Z,1520530562.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:02.301Z,1520530562.301 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:02.301Z,1520530562.301 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 197
2018-03-08T17:36:02.301Z,1520530562.301 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T17:36:02.302Z,1520530562.302 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:02.303Z,1520530562.303 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 197
2018-03-08T17:36:02.303Z,1520530562.303 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T17:36:02.304Z,1520530562.304 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:02.305Z,1520530562.305 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 197
2018-03-08T17:36:02.305Z,1520530562.305 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T17:36:02.353Z,1520530562.353 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T17:36:02.353Z,1520530562.353 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T17:36:02.353Z,1520530562.353 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T17:36:05.383Z,1520530565.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:05.444Z,1520530565.444 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T17:36:05.444Z,1520530565.444 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 197
2018-03-08T17:36:05.445Z,1520530565.445 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T17:36:05.445Z,1520530565.445 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 197
2018-03-08T17:36:05.445Z,1520530565.445 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T17:36:05.446Z,1520530565.446 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 197
2018-03-08T17:36:05.496Z,1520530565.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:05.523Z,1520530565.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T17:36:05.523Z,1520530565.523 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:36:05.524Z,1520530565.524 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:36:05.524Z,1520530565.524 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T17:36:05.529Z,1520530565.529 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:36:05.529Z,1520530565.529 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:36:05.530Z,1520530565.530 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T17:36:05.530Z,1520530565.530 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:36:05.530Z,1520530565.530 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:36:05.888Z,1520530565.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:05.910Z,1520530565.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T17:36:05.911Z,1520530565.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:06.290Z,1520530566.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:06.305Z,1520530566.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T17:36:06.306Z,1520530566.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:06.681Z,1520530566.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:06.701Z,1520530566.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T17:36:06.702Z,1520530566.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:07.091Z,1520530567.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:07.106Z,1520530567.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T17:36:07.107Z,1520530567.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:07.497Z,1520530567.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:07.511Z,1520530567.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T17:36:07.512Z,1520530567.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:07.891Z,1520530567.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:07.906Z,1520530567.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T17:36:07.907Z,1520530567.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:08.286Z,1520530568.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:08.301Z,1520530568.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T17:36:08.302Z,1520530568.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:08.689Z,1520530568.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:08.703Z,1520530568.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T17:36:08.704Z,1520530568.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:09.089Z,1520530569.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:09.104Z,1520530569.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T17:36:09.105Z,1520530569.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:09.487Z,1520530569.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:09.502Z,1520530569.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T17:36:09.503Z,1520530569.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:09.866Z,1520530569.866 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T17:36:09.866Z,1520530569.866 [NAL9602] Data Fault, FailCount= 5
2018-03-08T17:36:09.866Z,1520530569.866 [NAL9602](ERROR): Data Fault
2018-03-08T17:36:09.900Z,1520530569.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:09.915Z,1520530569.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T17:36:09.916Z,1520530569.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:09.948Z,1520530569.948 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T17:36:09.949Z,1520530569.949 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-08T17:36:10.262Z,1520530570.262 [NAL9602](INFO): Powering down
2018-03-08T17:36:10.289Z,1520530570.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:10.312Z,1520530570.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T17:36:10.313Z,1520530570.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:10.332Z,1520530570.332 [CBIT](INFO): Critical error at 20180308T173609
2018-03-08T17:36:10.690Z,1520530570.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:10.705Z,1520530570.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T17:36:10.706Z,1520530570.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:11.085Z,1520530571.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:11.100Z,1520530571.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T17:36:11.101Z,1520530571.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:11.482Z,1520530571.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:11.498Z,1520530571.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T17:36:11.499Z,1520530571.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:11.893Z,1520530571.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:11.908Z,1520530571.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T17:36:11.909Z,1520530571.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:12.286Z,1520530572.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:12.300Z,1520530572.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T17:36:12.301Z,1520530572.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:12.671Z,1520530572.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:12.702Z,1520530572.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T17:36:12.703Z,1520530572.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:13.090Z,1520530573.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:13.105Z,1520530573.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T17:36:13.106Z,1520530573.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:13.485Z,1520530573.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:13.507Z,1520530573.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T17:36:13.507Z,1520530573.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:13.889Z,1520530573.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:13.904Z,1520530573.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T17:36:13.905Z,1520530573.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:14.285Z,1520530574.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:14.305Z,1520530574.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T17:36:14.306Z,1520530574.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:14.674Z,1520530574.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:14.707Z,1520530574.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T17:36:14.708Z,1520530574.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:15.076Z,1520530575.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:15.102Z,1520530575.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T17:36:15.103Z,1520530575.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:15.487Z,1520530575.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:15.501Z,1520530575.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T17:36:15.502Z,1520530575.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:15.885Z,1520530575.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:15.915Z,1520530575.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T17:36:15.916Z,1520530575.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:16.289Z,1520530576.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:16.307Z,1520530576.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T17:36:16.308Z,1520530576.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:16.681Z,1520530576.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:16.714Z,1520530576.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T17:36:16.715Z,1520530576.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:17.082Z,1520530577.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:17.108Z,1520530577.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T17:36:17.109Z,1520530577.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:17.475Z,1520530577.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:17.504Z,1520530577.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T17:36:17.509Z,1520530577.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:17.882Z,1520530577.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:17.909Z,1520530577.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T17:36:17.910Z,1520530577.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:18.277Z,1520530578.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:18.311Z,1520530578.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T17:36:18.312Z,1520530578.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:18.675Z,1520530578.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:18.698Z,1520530578.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T17:36:18.699Z,1520530578.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:19.081Z,1520530579.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:19.117Z,1520530579.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T17:36:19.117Z,1520530579.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:19.481Z,1520530579.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:19.496Z,1520530579.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T17:36:19.523Z,1520530579.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:19.881Z,1520530579.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:19.917Z,1520530579.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T17:36:19.918Z,1520530579.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:20.282Z,1520530580.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:20.324Z,1520530580.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T17:36:20.325Z,1520530580.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:20.682Z,1520530580.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:20.721Z,1520530580.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T17:36:20.722Z,1520530580.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:21.078Z,1520530581.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:21.093Z,1520530581.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T17:36:21.094Z,1520530581.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:21.478Z,1520530581.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:21.492Z,1520530581.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T17:36:21.493Z,1520530581.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:21.886Z,1520530581.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:21.900Z,1520530581.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T17:36:21.924Z,1520530581.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:22.278Z,1520530582.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:22.293Z,1520530582.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T17:36:22.294Z,1520530582.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:22.685Z,1520530582.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:22.700Z,1520530582.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:23.078Z,1520530583.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:23.094Z,1520530583.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:23.478Z,1520530583.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:23.494Z,1520530583.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:23.885Z,1520530583.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:23.900Z,1520530583.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:24.285Z,1520530584.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:24.300Z,1520530584.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:24.677Z,1520530584.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:24.693Z,1520530584.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:25.082Z,1520530585.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:25.097Z,1520530585.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:25.485Z,1520530585.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:25.500Z,1520530585.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:25.879Z,1520530585.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:25.894Z,1520530585.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:26.282Z,1520530586.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:26.297Z,1520530586.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:26.685Z,1520530586.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:26.700Z,1520530586.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:27.077Z,1520530587.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:27.093Z,1520530587.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:27.485Z,1520530587.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:27.500Z,1520530587.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:27.885Z,1520530587.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:27.901Z,1520530587.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:28.285Z,1520530588.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:28.301Z,1520530588.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:28.683Z,1520530588.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:28.698Z,1520530588.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:29.085Z,1520530589.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:29.100Z,1520530589.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:29.477Z,1520530589.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:29.493Z,1520530589.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:29.885Z,1520530589.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:29.900Z,1520530589.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:30.285Z,1520530590.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:30.300Z,1520530590.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:30.678Z,1520530590.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:30.694Z,1520530590.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:31.082Z,1520530591.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:31.097Z,1520530591.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:31.486Z,1520530591.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:31.500Z,1520530591.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:31.886Z,1520530591.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:31.901Z,1520530591.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:32.283Z,1520530592.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:32.298Z,1520530592.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:32.682Z,1520530592.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:32.698Z,1520530592.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:33.081Z,1520530593.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:33.097Z,1520530593.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:33.487Z,1520530593.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:33.501Z,1520530593.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:33.886Z,1520530593.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:33.901Z,1520530593.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:34.282Z,1520530594.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:34.297Z,1520530594.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:34.683Z,1520530594.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:34.698Z,1520530594.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:35.086Z,1520530595.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:35.101Z,1520530595.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:35.479Z,1520530595.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:35.494Z,1520530595.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:35.882Z,1520530595.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:35.897Z,1520530595.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:36.287Z,1520530596.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:36.302Z,1520530596.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:36.679Z,1520530596.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:36.695Z,1520530596.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:37.082Z,1520530597.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:37.107Z,1520530597.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:37.482Z,1520530597.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:37.498Z,1520530597.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:37.882Z,1520530597.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:37.898Z,1520530597.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:38.283Z,1520530598.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:38.298Z,1520530598.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:38.686Z,1520530598.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:38.701Z,1520530598.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:39.082Z,1520530599.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:39.098Z,1520530599.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:39.486Z,1520530599.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:39.501Z,1520530599.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:39.882Z,1520530599.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:39.902Z,1520530599.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:40.281Z,1520530600.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:40.298Z,1520530600.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:40.683Z,1520530600.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:40.698Z,1520530600.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:41.083Z,1520530601.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:41.099Z,1520530601.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:41.481Z,1520530601.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:41.497Z,1520530601.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:41.883Z,1520530601.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:41.898Z,1520530601.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:42.286Z,1520530602.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:42.302Z,1520530602.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:42.681Z,1520530602.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:42.696Z,1520530602.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:43.083Z,1520530603.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:43.098Z,1520530603.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:43.483Z,1520530603.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:43.499Z,1520530603.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:43.887Z,1520530603.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:43.902Z,1520530603.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:44.286Z,1520530604.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:44.301Z,1520530604.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:44.686Z,1520530604.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:44.702Z,1520530604.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:45.082Z,1520530605.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:45.098Z,1520530605.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:45.483Z,1520530605.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:45.498Z,1520530605.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:45.887Z,1520530605.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:45.902Z,1520530605.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:46.286Z,1520530606.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:46.302Z,1520530606.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:46.686Z,1520530606.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:46.701Z,1520530606.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:47.083Z,1520530607.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:47.099Z,1520530607.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:47.486Z,1520530607.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:47.502Z,1520530607.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:47.883Z,1520530607.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:47.897Z,1520530607.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:48.283Z,1520530608.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:48.302Z,1520530608.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:48.684Z,1520530608.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:48.699Z,1520530608.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:49.083Z,1520530609.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:49.098Z,1520530609.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:49.484Z,1520530609.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:49.499Z,1520530609.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:49.887Z,1520530609.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:49.902Z,1520530609.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:50.283Z,1520530610.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:50.297Z,1520530610.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:50.683Z,1520530610.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:50.703Z,1520530610.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:51.085Z,1520530611.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:51.100Z,1520530611.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:51.481Z,1520530611.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:51.496Z,1520530611.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:51.888Z,1520530611.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:51.910Z,1520530611.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:52.287Z,1520530612.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:52.303Z,1520530612.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:52.688Z,1520530612.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:52.703Z,1520530612.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:53.087Z,1520530613.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:53.103Z,1520530613.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:53.487Z,1520530613.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:53.503Z,1520530613.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:53.889Z,1520530613.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:53.904Z,1520530613.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:54.288Z,1520530614.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:54.303Z,1520530614.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:54.687Z,1520530614.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:54.702Z,1520530614.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:55.087Z,1520530615.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:55.102Z,1520530615.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:55.483Z,1520530615.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:55.498Z,1520530615.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:55.887Z,1520530615.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:55.903Z,1520530615.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:56.285Z,1520530616.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:56.300Z,1520530616.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:56.683Z,1520530616.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:56.699Z,1520530616.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:57.087Z,1520530617.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:57.103Z,1520530617.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:57.487Z,1520530617.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:57.503Z,1520530617.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:57.886Z,1520530617.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:57.903Z,1520530617.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:58.286Z,1520530618.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:58.302Z,1520530618.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:58.684Z,1520530618.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:58.699Z,1520530618.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:59.082Z,1520530619.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:59.097Z,1520530619.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:59.487Z,1520530619.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:59.503Z,1520530619.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:36:59.886Z,1520530619.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:36:59.901Z,1520530619.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:00.287Z,1520530620.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:00.302Z,1520530620.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:00.686Z,1520530620.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:00.702Z,1520530620.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:01.086Z,1520530621.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:01.101Z,1520530621.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:01.482Z,1520530621.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:01.498Z,1520530621.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:01.885Z,1520530621.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:01.901Z,1520530621.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:02.291Z,1520530622.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:02.305Z,1520530622.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:05.396Z,1520530625.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:05.411Z,1520530625.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:05.503Z,1520530625.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:05.539Z,1520530625.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:05.890Z,1520530625.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:05.905Z,1520530625.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:06.291Z,1520530626.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:06.306Z,1520530626.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:06.687Z,1520530626.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:06.702Z,1520530626.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:07.091Z,1520530627.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:07.105Z,1520530627.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:07.482Z,1520530627.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:07.497Z,1520530627.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:07.890Z,1520530627.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:07.906Z,1520530627.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:08.290Z,1520530628.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:08.306Z,1520530628.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:08.682Z,1520530628.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:08.697Z,1520530628.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:09.091Z,1520530629.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:09.106Z,1520530629.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:09.490Z,1520530629.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:09.505Z,1520530629.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:09.887Z,1520530629.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:09.901Z,1520530629.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:10.290Z,1520530630.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:10.306Z,1520530630.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:10.690Z,1520530630.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:10.705Z,1520530630.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:11.086Z,1520530631.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:11.101Z,1520530631.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:11.488Z,1520530631.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:11.503Z,1520530631.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:11.891Z,1520530631.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:11.906Z,1520530631.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:12.285Z,1520530632.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:12.300Z,1520530632.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:12.686Z,1520530632.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:12.702Z,1520530632.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:13.086Z,1520530633.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:13.114Z,1520530633.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:13.481Z,1520530633.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:13.496Z,1520530633.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:13.887Z,1520530633.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:13.902Z,1520530633.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:14.290Z,1520530634.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:14.305Z,1520530634.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:14.683Z,1520530634.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:14.697Z,1520530634.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:15.090Z,1520530635.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:15.110Z,1520530635.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:15.490Z,1520530635.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:15.505Z,1520530635.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:15.891Z,1520530635.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:15.906Z,1520530635.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:16.291Z,1520530636.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:16.310Z,1520530636.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:16.690Z,1520530636.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:16.705Z,1520530636.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:17.086Z,1520530637.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:17.101Z,1520530637.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:17.488Z,1520530637.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:17.504Z,1520530637.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:17.890Z,1520530637.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:17.910Z,1520530637.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:18.286Z,1520530638.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:18.301Z,1520530638.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:18.690Z,1520530638.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:18.710Z,1520530638.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:19.090Z,1520530639.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:19.110Z,1520530639.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:19.482Z,1520530639.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:19.497Z,1520530639.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:19.891Z,1520530639.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:19.910Z,1520530639.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:20.288Z,1520530640.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:20.304Z,1520530640.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:20.686Z,1520530640.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:20.701Z,1520530640.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:21.091Z,1520530641.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:21.110Z,1520530641.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:21.491Z,1520530641.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:21.506Z,1520530641.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:21.890Z,1520530641.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:21.905Z,1520530641.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:22.291Z,1520530642.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:22.310Z,1520530642.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:22.690Z,1520530642.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:22.706Z,1520530642.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:23.086Z,1520530643.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:23.101Z,1520530643.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:23.491Z,1520530643.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:23.507Z,1520530643.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:23.888Z,1520530643.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:23.903Z,1520530643.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:24.286Z,1520530644.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:24.301Z,1520530644.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:24.688Z,1520530644.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:24.704Z,1520530644.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:25.090Z,1520530645.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:25.110Z,1520530645.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:25.487Z,1520530645.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:25.502Z,1520530645.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:25.891Z,1520530645.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:25.910Z,1520530645.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:26.291Z,1520530646.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:26.306Z,1520530646.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:26.682Z,1520530646.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:26.697Z,1520530646.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:27.091Z,1520530647.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:27.110Z,1520530647.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:27.490Z,1520530647.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:27.514Z,1520530647.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:27.891Z,1520530647.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:27.906Z,1520530647.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:28.289Z,1520530648.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:28.305Z,1520530648.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:28.688Z,1520530648.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:28.704Z,1520530648.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:29.089Z,1520530649.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:29.104Z,1520530649.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:29.488Z,1520530649.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:29.512Z,1520530649.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:29.893Z,1520530649.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:29.914Z,1520530649.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:30.291Z,1520530650.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:30.307Z,1520530650.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:30.685Z,1520530650.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:30.713Z,1520530650.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:31.093Z,1520530651.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:31.111Z,1520530651.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:31.491Z,1520530651.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:31.505Z,1520530651.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:31.894Z,1520530651.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:31.914Z,1520530651.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:32.296Z,1520530652.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:32.311Z,1520530652.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:32.692Z,1520530652.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:32.706Z,1520530652.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:33.085Z,1520530653.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:33.109Z,1520530653.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:33.495Z,1520530653.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:33.510Z,1520530653.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:33.890Z,1520530653.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:33.914Z,1520530653.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:34.279Z,1520530654.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:34.308Z,1520530654.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:34.686Z,1520530654.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:34.709Z,1520530654.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:35.078Z,1520530655.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:35.114Z,1520530655.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:35.479Z,1520530655.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:35.507Z,1520530655.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:35.885Z,1520530655.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:35.909Z,1520530655.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:36.289Z,1520530656.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:36.307Z,1520530656.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:36.679Z,1520530656.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:36.707Z,1520530656.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:37.094Z,1520530657.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:37.115Z,1520530657.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:37.477Z,1520530657.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:37.503Z,1520530657.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:37.893Z,1520530657.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:37.908Z,1520530657.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:38.282Z,1520530658.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:38.307Z,1520530658.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:38.677Z,1520530658.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:38.710Z,1520530658.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:39.079Z,1520530659.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:39.108Z,1520530659.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:39.486Z,1520530659.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:39.511Z,1520530659.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:39.882Z,1520530659.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:39.907Z,1520530659.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:40.285Z,1520530660.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:40.312Z,1520530660.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:40.682Z,1520530660.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:40.707Z,1520530660.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:41.077Z,1520530661.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:41.113Z,1520530661.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:41.475Z,1520530661.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:41.499Z,1520530661.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:41.887Z,1520530661.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:41.913Z,1520530661.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:42.281Z,1520530662.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:42.315Z,1520530662.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:42.675Z,1520530662.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:42.691Z,1520530662.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:43.086Z,1520530663.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:43.117Z,1520530663.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:43.485Z,1520530663.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:43.500Z,1520530663.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:43.886Z,1520530663.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:43.918Z,1520530663.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:44.286Z,1520530664.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:44.301Z,1520530664.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:44.685Z,1520530664.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:44.700Z,1520530664.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:45.082Z,1520530665.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:45.097Z,1520530665.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:45.490Z,1520530665.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:45.505Z,1520530665.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:45.889Z,1520530665.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:45.904Z,1520530665.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:46.282Z,1520530666.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:46.297Z,1520530666.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:46.694Z,1520530666.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:46.731Z,1520530666.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:47.086Z,1520530667.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:47.101Z,1520530667.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:47.486Z,1520530667.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:47.501Z,1520530667.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:47.887Z,1520530667.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:47.903Z,1520530667.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:48.290Z,1520530668.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:48.305Z,1520530668.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:48.682Z,1520530668.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:48.698Z,1520530668.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:49.087Z,1520530669.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:49.103Z,1520530669.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:49.486Z,1520530669.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:49.517Z,1520530669.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:49.892Z,1520530669.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:49.907Z,1520530669.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:50.292Z,1520530670.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:50.308Z,1520530670.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:50.692Z,1520530670.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:50.706Z,1520530670.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:51.082Z,1520530671.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:51.097Z,1520530671.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:51.490Z,1520530671.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:51.505Z,1520530671.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:51.889Z,1520530671.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:51.910Z,1520530671.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:52.286Z,1520530672.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:52.302Z,1520530672.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:52.684Z,1520530672.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:52.715Z,1520530672.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:53.093Z,1520530673.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:53.107Z,1520530673.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:53.479Z,1520530673.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:53.508Z,1520530673.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:53.893Z,1520530673.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:53.909Z,1520530673.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:54.281Z,1520530674.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:54.307Z,1520530674.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:54.679Z,1520530674.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:54.714Z,1520530674.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:55.093Z,1520530675.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:55.109Z,1520530675.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:55.477Z,1520530675.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:55.502Z,1520530675.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:55.893Z,1520530675.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:55.908Z,1520530675.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:56.283Z,1520530676.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:56.309Z,1520530676.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:56.682Z,1520530676.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:56.707Z,1520530676.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:57.079Z,1520530677.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:57.115Z,1520530677.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:57.486Z,1520530677.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:57.511Z,1520530677.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:57.877Z,1520530677.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:57.909Z,1520530677.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:58.286Z,1520530678.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:58.313Z,1520530678.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:58.682Z,1520530678.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:58.707Z,1520530678.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:59.077Z,1520530679.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:59.109Z,1520530679.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:59.475Z,1520530679.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:59.499Z,1520530679.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:37:59.886Z,1520530679.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:37:59.911Z,1520530679.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:00.277Z,1520530680.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:00.315Z,1520530680.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:00.683Z,1520530680.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:00.759Z,1520530680.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:01.084Z,1520530681.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:01.158Z,1520530681.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:01.481Z,1520530681.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:01.517Z,1520530681.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:01.879Z,1520530681.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:01.911Z,1520530681.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:02.287Z,1520530682.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:02.322Z,1520530682.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:05.379Z,1520530685.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:05.394Z,1520530685.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:05.485Z,1520530685.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:05.500Z,1520530685.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:05.890Z,1520530685.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:05.921Z,1520530685.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:06.286Z,1520530686.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:06.300Z,1520530686.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:06.681Z,1520530686.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:06.696Z,1520530686.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:07.083Z,1520530687.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:07.099Z,1520530687.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:07.485Z,1520530687.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:07.500Z,1520530687.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:07.882Z,1520530687.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:07.898Z,1520530687.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:08.286Z,1520530688.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:08.301Z,1520530688.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:08.683Z,1520530688.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:08.698Z,1520530688.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:09.084Z,1520530689.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:09.100Z,1520530689.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:09.486Z,1520530689.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:09.506Z,1520530689.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:09.884Z,1520530689.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:09.899Z,1520530689.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:09.944Z,1520530689.944 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T17:38:09.944Z,1520530689.944 [NAL9602] No Fault, FailCount= 5
2018-03-08T17:38:10.273Z,1520530690.273 [NAL9602](INFO): Powering up NAL9602
2018-03-08T17:38:10.291Z,1520530690.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:10.306Z,1520530690.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:10.686Z,1520530690.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:10.702Z,1520530690.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:11.086Z,1520530691.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:11.100Z,1520530691.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:11.484Z,1520530691.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:11.500Z,1520530691.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:11.885Z,1520530691.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:11.902Z,1520530691.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:12.285Z,1520530692.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:12.301Z,1520530692.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:12.684Z,1520530692.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:12.700Z,1520530692.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:13.085Z,1520530693.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:13.100Z,1520530693.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:13.486Z,1520530693.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:13.502Z,1520530693.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:13.887Z,1520530693.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:13.902Z,1520530693.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:14.285Z,1520530694.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:14.299Z,1520530694.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:14.686Z,1520530694.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:14.701Z,1520530694.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:15.087Z,1520530695.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:15.102Z,1520530695.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:15.487Z,1520530695.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:15.502Z,1520530695.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:15.887Z,1520530695.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:15.901Z,1520530695.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:16.287Z,1520530696.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:16.302Z,1520530696.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:16.686Z,1520530696.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:16.702Z,1520530696.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:17.087Z,1520530697.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:17.101Z,1520530697.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:17.480Z,1520530697.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:17.495Z,1520530697.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:17.885Z,1520530697.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:17.906Z,1520530697.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:18.286Z,1520530698.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:18.301Z,1520530698.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:18.683Z,1520530698.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:18.698Z,1520530698.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:19.087Z,1520530699.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:19.102Z,1520530699.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:19.487Z,1520530699.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:19.502Z,1520530699.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:19.883Z,1520530699.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:19.898Z,1520530699.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:20.285Z,1520530700.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:20.300Z,1520530700.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:20.687Z,1520530700.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:20.702Z,1520530700.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:21.101Z,1520530701.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:21.132Z,1520530701.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:21.462Z,1520530701.462 [NAL9602](INFO): NAL9602 initialized
2018-03-08T17:38:21.490Z,1520530701.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:21.510Z,1520530701.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:21.890Z,1520530701.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:21.905Z,1520530701.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:22.292Z,1520530702.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:22.314Z,1520530702.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:22.700Z,1520530702.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:22.722Z,1520530702.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:23.099Z,1520530703.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:23.114Z,1520530703.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:23.487Z,1520530703.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:23.506Z,1520530703.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:23.903Z,1520530703.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:23.922Z,1520530703.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:24.281Z,1520530704.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:24.344Z,1520530704.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:24.678Z,1520530704.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:24.704Z,1520530704.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:25.101Z,1520530705.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:25.117Z,1520530705.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:25.501Z,1520530705.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:25.516Z,1520530705.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:25.900Z,1520530705.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:25.915Z,1520530705.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:26.279Z,1520530706.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:26.305Z,1520530706.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:26.678Z,1520530706.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:26.705Z,1520530706.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:27.093Z,1520530707.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:27.116Z,1520530707.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:27.504Z,1520530707.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:27.520Z,1520530707.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:27.901Z,1520530707.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:27.916Z,1520530707.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:28.283Z,1520530708.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:28.309Z,1520530708.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:28.677Z,1520530708.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:28.703Z,1520530708.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:29.096Z,1520530709.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:29.123Z,1520530709.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:29.497Z,1520530709.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:29.512Z,1520530709.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:29.905Z,1520530709.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:29.920Z,1520530709.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:30.279Z,1520530710.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:30.310Z,1520530710.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:30.676Z,1520530710.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:30.699Z,1520530710.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:31.101Z,1520530711.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:31.116Z,1520530711.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:31.502Z,1520530711.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:31.517Z,1520530711.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:31.901Z,1520530711.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:31.920Z,1520530711.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:32.279Z,1520530712.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:32.306Z,1520530712.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:32.682Z,1520530712.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:32.719Z,1520530712.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:33.089Z,1520530713.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:33.115Z,1520530713.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:33.493Z,1520530713.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:33.519Z,1520530713.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:33.889Z,1520530713.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:33.922Z,1520530713.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:34.283Z,1520530714.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:34.315Z,1520530714.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:34.682Z,1520530714.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:34.719Z,1520530714.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:35.097Z,1520530715.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:35.124Z,1520530715.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:35.489Z,1520530715.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:35.504Z,1520530715.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:35.894Z,1520530715.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:35.929Z,1520530715.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:36.287Z,1520530716.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:36.302Z,1520530716.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:36.716Z,1520530716.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:36.755Z,1520530716.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:37.093Z,1520530717.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:37.108Z,1520530717.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:37.493Z,1520530717.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:37.508Z,1520530717.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:37.889Z,1520530717.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:37.905Z,1520530717.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:38.280Z,1520530718.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:38.295Z,1520530718.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:38.682Z,1520530718.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:38.706Z,1520530718.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:39.093Z,1520530719.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:39.109Z,1520530719.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:39.518Z,1520530719.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:39.606Z,1520530719.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:39.893Z,1520530719.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:39.909Z,1520530719.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:40.281Z,1520530720.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:40.296Z,1520530720.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:40.679Z,1520530720.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:40.707Z,1520530720.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:41.090Z,1520530721.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:41.115Z,1520530721.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:41.497Z,1520530721.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:41.519Z,1520530721.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:41.897Z,1520530721.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:41.921Z,1520530721.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:42.291Z,1520530722.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:42.323Z,1520530722.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:42.686Z,1520530722.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:42.706Z,1520530722.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:43.093Z,1520530723.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:43.109Z,1520530723.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:43.501Z,1520530723.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:43.532Z,1520530723.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:43.893Z,1520530723.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:43.909Z,1520530723.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:44.286Z,1520530724.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:44.306Z,1520530724.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:44.688Z,1520530724.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:44.703Z,1520530724.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:45.101Z,1520530725.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:45.130Z,1520530725.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:45.498Z,1520530725.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:45.521Z,1520530725.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:45.890Z,1520530725.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:45.905Z,1520530725.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:46.288Z,1520530726.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:46.304Z,1520530726.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:46.684Z,1520530726.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:46.711Z,1520530726.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:47.099Z,1520530727.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:47.115Z,1520530727.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:47.496Z,1520530727.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:47.512Z,1520530727.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:47.897Z,1520530727.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:47.912Z,1520530727.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:48.290Z,1520530728.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:48.305Z,1520530728.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:48.685Z,1520530728.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:48.706Z,1520530728.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:49.098Z,1520530729.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:49.113Z,1520530729.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:49.498Z,1520530729.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:49.513Z,1520530729.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:49.897Z,1520530729.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:49.913Z,1520530729.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:50.295Z,1520530730.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:50.315Z,1520530730.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:50.691Z,1520530730.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:50.707Z,1520530730.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:51.098Z,1520530731.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:51.113Z,1520530731.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:51.496Z,1520530731.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:51.518Z,1520530731.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:51.901Z,1520530731.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:51.917Z,1520530731.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:52.291Z,1520530732.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:52.308Z,1520530732.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:52.685Z,1520530732.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:52.706Z,1520530732.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:53.101Z,1520530733.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:53.123Z,1520530733.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:53.499Z,1520530733.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:53.515Z,1520530733.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:53.897Z,1520530733.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:53.912Z,1520530733.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:54.287Z,1520530734.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:54.310Z,1520530734.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:54.690Z,1520530734.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:54.711Z,1520530734.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:55.098Z,1520530735.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:55.113Z,1520530735.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:55.500Z,1520530735.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:55.515Z,1520530735.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:55.900Z,1520530735.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:55.922Z,1520530735.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:56.291Z,1520530736.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:56.306Z,1520530736.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:56.687Z,1520530736.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:56.710Z,1520530736.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:57.101Z,1520530737.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:57.116Z,1520530737.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:57.499Z,1520530737.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:57.518Z,1520530737.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:57.901Z,1520530737.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:57.922Z,1520530737.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:58.291Z,1520530738.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:58.306Z,1520530738.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:58.681Z,1520530738.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:58.703Z,1520530738.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:59.097Z,1520530739.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:59.113Z,1520530739.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:59.499Z,1520530739.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:59.522Z,1520530739.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:38:59.900Z,1520530739.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:38:59.922Z,1520530739.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:00.291Z,1520530740.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:00.306Z,1520530740.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:00.690Z,1520530740.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:00.705Z,1520530740.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:01.096Z,1520530741.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:01.111Z,1520530741.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:01.500Z,1520530741.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:01.515Z,1520530741.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:01.901Z,1520530741.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:01.916Z,1520530741.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:01.919Z,1520530741.919 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T17:39:01.919Z,1520530741.919 [Default:CheckIn:C.Wait] Stopped
2018-03-08T17:39:01.919Z,1520530741.919 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T17:39:01.919Z,1520530741.919 [Default:CheckIn:D] Running Loop=1
2018-03-08T17:39:02.291Z,1520530742.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:02.306Z,1520530742.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:02.310Z,1520530742.310 [Default:CheckIn:D] Stopped
2018-03-08T17:39:02.310Z,1520530742.310 [Default:CheckIn:E] Running Loop=1
2018-03-08T17:39:02.678Z,1520530742.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:02.707Z,1520530742.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:02.710Z,1520530742.710 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 593.291732 min 
2018-03-08T17:39:02.710Z,1520530742.710 [Default:CheckIn:E] Stopped
2018-03-08T17:39:02.710Z,1520530742.710 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T17:39:02.710Z,1520530742.710 [Default:CheckIn] Stopped
2018-03-08T17:39:02.710Z,1520530742.710 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T17:39:02.711Z,1520530742.711 [Default:CheckIn](INFO): Running loop #58
2018-03-08T17:39:02.711Z,1520530742.711 [Default:CheckIn] Running Loop=58
2018-03-08T17:39:02.711Z,1520530742.711 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T17:39:02.711Z,1520530742.711 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T17:39:05.802Z,1520530745.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:05.817Z,1520530745.817 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:05.817Z,1520530745.817 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 198
2018-03-08T17:39:05.817Z,1520530745.817 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T17:39:05.819Z,1520530745.819 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:05.819Z,1520530745.819 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 198
2018-03-08T17:39:05.819Z,1520530745.819 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T17:39:05.821Z,1520530745.821 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:05.821Z,1520530745.821 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 198
2018-03-08T17:39:05.821Z,1520530745.821 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T17:39:05.849Z,1520530745.849 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T17:39:05.849Z,1520530745.849 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T17:39:05.849Z,1520530745.849 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T17:39:05.936Z,1520530745.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:06.005Z,1520530746.005 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T17:39:06.005Z,1520530746.005 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 198
2018-03-08T17:39:06.005Z,1520530746.005 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T17:39:06.005Z,1520530746.005 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 198
2018-03-08T17:39:06.006Z,1520530746.006 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T17:39:06.006Z,1520530746.006 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 198
2018-03-08T17:39:06.310Z,1520530746.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:06.324Z,1520530746.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T17:39:06.325Z,1520530746.325 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:39:06.325Z,1520530746.325 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:39:06.325Z,1520530746.325 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T17:39:06.326Z,1520530746.326 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:39:06.326Z,1520530746.326 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:39:06.326Z,1520530746.326 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T17:39:06.327Z,1520530746.327 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:39:06.327Z,1520530746.327 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:39:06.688Z,1520530746.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:06.715Z,1520530746.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-03-08T17:39:06.720Z,1520530746.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:07.086Z,1520530747.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:07.122Z,1520530747.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-03-08T17:39:07.123Z,1520530747.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:07.487Z,1520530747.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:07.501Z,1520530747.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-03-08T17:39:07.502Z,1520530747.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:07.890Z,1520530747.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:07.926Z,1520530747.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-03-08T17:39:07.927Z,1520530747.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:08.301Z,1520530748.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:08.332Z,1520530748.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-03-08T17:39:08.337Z,1520530748.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:08.702Z,1520530748.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:08.716Z,1520530748.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-03-08T17:39:08.729Z,1520530748.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:09.105Z,1520530749.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:09.120Z,1520530749.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-03-08T17:39:09.137Z,1520530749.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:09.494Z,1520530749.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:09.514Z,1520530749.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-08T17:39:09.515Z,1520530749.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:09.894Z,1520530749.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:09.909Z,1520530749.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-03-08T17:39:09.910Z,1520530749.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:10.294Z,1520530750.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:10.309Z,1520530750.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-03-08T17:39:10.310Z,1520530750.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:10.690Z,1520530750.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:10.706Z,1520530750.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-08T17:39:10.706Z,1520530750.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:11.097Z,1520530751.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:11.112Z,1520530751.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-08T17:39:11.113Z,1520530751.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:11.509Z,1520530751.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:11.524Z,1520530751.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T17:39:11.541Z,1520530751.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:11.899Z,1520530751.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:11.922Z,1520530751.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T17:39:11.923Z,1520530751.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:12.295Z,1520530752.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:12.310Z,1520530752.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-08T17:39:12.311Z,1520530752.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:12.694Z,1520530752.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:12.714Z,1520530752.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-08T17:39:12.715Z,1520530752.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:13.104Z,1520530753.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:13.119Z,1520530753.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-08T17:39:13.120Z,1520530753.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:13.504Z,1520530753.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:13.519Z,1520530753.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-08T17:39:13.520Z,1520530753.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:13.904Z,1520530753.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:13.919Z,1520530753.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-08T17:39:13.920Z,1520530753.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:14.295Z,1520530754.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:14.310Z,1520530754.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-08T17:39:14.311Z,1520530754.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:14.691Z,1520530754.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:14.705Z,1520530754.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-08T17:39:14.706Z,1520530754.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:15.100Z,1520530755.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:15.115Z,1520530755.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-08T17:39:15.116Z,1520530755.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:15.503Z,1520530755.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:15.522Z,1520530755.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-08T17:39:15.523Z,1520530755.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:15.904Z,1520530755.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:15.919Z,1520530755.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T17:39:15.920Z,1520530755.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:16.291Z,1520530756.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:16.306Z,1520530756.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-08T17:39:16.307Z,1520530756.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:16.685Z,1520530756.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:16.708Z,1520530756.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T17:39:16.709Z,1520530756.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:17.101Z,1520530757.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:17.116Z,1520530757.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T17:39:17.117Z,1520530757.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:17.503Z,1520530757.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:17.519Z,1520530757.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T17:39:17.520Z,1520530757.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:17.900Z,1520530757.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:17.915Z,1520530757.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T17:39:17.916Z,1520530757.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:18.297Z,1520530758.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:18.311Z,1520530758.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T17:39:18.312Z,1520530758.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:18.694Z,1520530758.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:18.714Z,1520530758.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-08T17:39:18.715Z,1520530758.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:19.104Z,1520530759.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:19.119Z,1520530759.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-08T17:39:19.120Z,1520530759.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:19.504Z,1520530759.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:19.518Z,1520530759.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-08T17:39:19.519Z,1520530759.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:19.905Z,1520530759.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:19.920Z,1520530759.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-08T17:39:19.921Z,1520530759.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:20.295Z,1520530760.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:20.310Z,1520530760.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-08T17:39:20.311Z,1520530760.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:20.693Z,1520530760.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:20.708Z,1520530760.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T17:39:20.709Z,1520530760.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:21.101Z,1520530761.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:21.116Z,1520530761.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-08T17:39:21.117Z,1520530761.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:21.503Z,1520530761.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:21.526Z,1520530761.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T17:39:21.527Z,1520530761.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:21.905Z,1520530761.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:21.919Z,1520530761.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T17:39:21.920Z,1520530761.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:22.295Z,1520530762.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:22.311Z,1520530762.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T17:39:22.312Z,1520530762.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:22.685Z,1520530762.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:22.707Z,1520530762.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T17:39:22.708Z,1520530762.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:23.104Z,1520530763.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:23.119Z,1520530763.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-08T17:39:23.120Z,1520530763.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:23.503Z,1520530763.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:23.518Z,1520530763.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T17:39:23.519Z,1520530763.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:23.900Z,1520530763.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:23.915Z,1520530763.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-08T17:39:23.916Z,1520530763.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:24.291Z,1520530764.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:24.306Z,1520530764.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-08T17:39:24.307Z,1520530764.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:24.685Z,1520530764.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:24.708Z,1520530764.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T17:39:24.709Z,1520530764.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:25.101Z,1520530765.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:25.120Z,1520530765.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T17:39:25.125Z,1520530765.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:25.502Z,1520530765.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:25.516Z,1520530765.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T17:39:25.517Z,1520530765.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:25.905Z,1520530765.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:25.920Z,1520530765.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:26.283Z,1520530766.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:26.314Z,1520530766.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:26.683Z,1520530766.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:26.714Z,1520530766.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:27.110Z,1520530767.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:27.126Z,1520530767.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:27.503Z,1520530767.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:27.524Z,1520530767.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:27.912Z,1520530767.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:27.926Z,1520530767.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:28.284Z,1520530768.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:28.316Z,1520530768.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:28.687Z,1520530768.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:28.718Z,1520530768.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:29.094Z,1520530769.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:29.127Z,1520530769.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:29.494Z,1520530769.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:29.531Z,1520530769.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:29.899Z,1520530769.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:29.924Z,1520530769.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:30.288Z,1520530770.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:30.322Z,1520530770.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:30.683Z,1520530770.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:30.700Z,1520530770.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:31.098Z,1520530771.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:31.125Z,1520530771.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:31.497Z,1520530771.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:31.525Z,1520530771.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:31.898Z,1520530771.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:31.926Z,1520530771.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:32.291Z,1520530772.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:32.326Z,1520530772.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:32.690Z,1520530772.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:32.705Z,1520530772.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:33.101Z,1520530773.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:33.134Z,1520530773.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:33.509Z,1520530773.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:33.538Z,1520530773.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:33.901Z,1520530773.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:33.936Z,1520530773.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:34.284Z,1520530774.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:34.306Z,1520530774.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:34.692Z,1520530774.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:34.707Z,1520530774.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:35.097Z,1520530775.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:35.112Z,1520530775.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:35.493Z,1520530775.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:35.509Z,1520530775.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:35.893Z,1520530775.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:35.909Z,1520530775.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:36.292Z,1520530776.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:36.307Z,1520530776.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:36.679Z,1520530776.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:36.702Z,1520530776.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:37.097Z,1520530777.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:37.113Z,1520530777.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:37.497Z,1520530777.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:37.512Z,1520530777.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:37.895Z,1520530777.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:37.911Z,1520530777.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:38.294Z,1520530778.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:38.309Z,1520530778.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:38.691Z,1520530778.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:38.705Z,1520530778.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:39.097Z,1520530779.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:39.113Z,1520530779.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:39.502Z,1520530779.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:39.522Z,1520530779.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:39.900Z,1520530779.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:39.915Z,1520530779.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:40.296Z,1520530780.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:40.311Z,1520530780.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:40.690Z,1520530780.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:40.705Z,1520530780.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:41.100Z,1520530781.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:41.115Z,1520530781.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:41.500Z,1520530781.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:41.517Z,1520530781.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:41.899Z,1520530781.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:41.919Z,1520530781.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:42.296Z,1520530782.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:42.311Z,1520530782.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:42.685Z,1520530782.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:42.708Z,1520530782.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:43.099Z,1520530783.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:43.115Z,1520530783.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:43.501Z,1520530783.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:43.516Z,1520530783.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:43.900Z,1520530783.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:43.915Z,1520530783.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:44.296Z,1520530784.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:44.311Z,1520530784.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:44.695Z,1520530784.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:44.709Z,1520530784.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:45.100Z,1520530785.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:45.115Z,1520530785.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:45.499Z,1520530785.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:45.518Z,1520530785.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:45.900Z,1520530785.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:45.915Z,1520530785.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:46.288Z,1520530786.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:46.304Z,1520530786.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:46.685Z,1520530786.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:46.708Z,1520530786.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:47.101Z,1520530787.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:47.116Z,1520530787.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:47.500Z,1520530787.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:47.515Z,1520530787.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:47.899Z,1520530787.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:47.922Z,1520530787.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:48.295Z,1520530788.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:48.311Z,1520530788.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:48.688Z,1520530788.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:48.703Z,1520530788.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:49.101Z,1520530789.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:49.117Z,1520530789.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:49.500Z,1520530789.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:49.515Z,1520530789.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:49.899Z,1520530789.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:49.915Z,1520530789.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:50.295Z,1520530790.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:50.310Z,1520530790.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:50.694Z,1520530790.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:50.709Z,1520530790.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:51.100Z,1520530791.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:51.122Z,1520530791.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:51.501Z,1520530791.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:51.517Z,1520530791.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:51.901Z,1520530791.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:51.915Z,1520530791.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:52.295Z,1520530792.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:52.310Z,1520530792.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:52.694Z,1520530792.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:52.709Z,1520530792.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:53.100Z,1520530793.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:53.116Z,1520530793.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:53.500Z,1520530793.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:53.515Z,1520530793.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:53.900Z,1520530793.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:53.915Z,1520530793.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:54.295Z,1520530794.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:54.310Z,1520530794.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:54.687Z,1520530794.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:54.706Z,1520530794.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:55.098Z,1520530795.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:55.118Z,1520530795.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:55.500Z,1520530795.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:55.515Z,1520530795.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:55.901Z,1520530795.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:55.922Z,1520530795.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:56.295Z,1520530796.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:56.310Z,1520530796.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:56.695Z,1520530796.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:56.710Z,1520530796.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:57.098Z,1520530797.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:57.119Z,1520530797.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:57.501Z,1520530797.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:57.516Z,1520530797.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:57.901Z,1520530797.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:57.916Z,1520530797.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:58.295Z,1520530798.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:58.310Z,1520530798.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:58.690Z,1520530798.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:58.706Z,1520530798.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:59.100Z,1520530799.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:59.122Z,1520530799.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:59.500Z,1520530799.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:59.515Z,1520530799.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:39:59.899Z,1520530799.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:39:59.915Z,1520530799.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:00.295Z,1520530800.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:00.310Z,1520530800.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:00.688Z,1520530800.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:00.711Z,1520530800.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:01.104Z,1520530801.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:01.126Z,1520530801.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:01.504Z,1520530801.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:01.519Z,1520530801.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:01.904Z,1520530801.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:01.927Z,1520530801.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:02.295Z,1520530802.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:02.310Z,1520530802.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:02.691Z,1520530802.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:02.710Z,1520530802.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:05.797Z,1520530805.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:05.815Z,1520530805.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:05.929Z,1520530805.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:05.971Z,1520530805.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:06.282Z,1520530806.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:06.308Z,1520530806.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:06.667Z,1520530806.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:06.682Z,1520530806.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:07.067Z,1520530807.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:07.083Z,1520530807.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:07.469Z,1520530807.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:07.485Z,1520530807.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:07.868Z,1520530807.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:07.883Z,1520530807.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:08.274Z,1520530808.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:08.290Z,1520530808.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:08.682Z,1520530808.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:08.706Z,1520530808.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:09.086Z,1520530809.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:09.116Z,1520530809.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:09.467Z,1520530809.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:09.483Z,1520530809.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:09.871Z,1520530809.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:09.887Z,1520530809.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:10.273Z,1520530810.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:10.288Z,1520530810.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:10.659Z,1520530810.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:10.687Z,1520530810.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:11.077Z,1520530811.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:11.093Z,1520530811.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:11.485Z,1520530811.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:11.518Z,1520530811.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:11.873Z,1520530811.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:11.889Z,1520530811.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:12.272Z,1520530812.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:12.288Z,1520530812.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:12.671Z,1520530812.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:12.686Z,1520530812.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:13.077Z,1520530813.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:13.093Z,1520530813.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:13.477Z,1520530813.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:13.492Z,1520530813.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:13.884Z,1520530813.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:13.899Z,1520530813.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:14.272Z,1520530814.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:14.288Z,1520530814.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:14.668Z,1520530814.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:14.691Z,1520530814.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:15.085Z,1520530815.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:15.100Z,1520530815.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:15.471Z,1520530815.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:15.486Z,1520530815.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:15.873Z,1520530815.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:15.889Z,1520530815.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:16.271Z,1520530816.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:16.286Z,1520530816.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:16.665Z,1520530816.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:16.685Z,1520530816.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:17.074Z,1520530817.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:17.090Z,1520530817.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:17.477Z,1520530817.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:17.498Z,1520530817.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:17.885Z,1520530817.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:17.917Z,1520530817.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:18.274Z,1520530818.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:18.290Z,1520530818.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:18.667Z,1520530818.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:18.682Z,1520530818.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:19.078Z,1520530819.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:19.094Z,1520530819.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:19.477Z,1520530819.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:19.493Z,1520530819.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:19.877Z,1520530819.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:19.898Z,1520530819.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:20.272Z,1520530820.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:20.288Z,1520530820.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:20.674Z,1520530820.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:20.689Z,1520530820.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:21.077Z,1520530821.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:21.092Z,1520530821.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:21.473Z,1520530821.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:21.501Z,1520530821.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:21.880Z,1520530821.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:21.895Z,1520530821.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:22.271Z,1520530822.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:22.286Z,1520530822.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:22.668Z,1520530822.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:22.684Z,1520530822.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:23.078Z,1520530823.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:23.099Z,1520530823.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:23.481Z,1520530823.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:23.496Z,1520530823.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:23.879Z,1520530823.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:23.896Z,1520530823.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:24.271Z,1520530824.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:24.286Z,1520530824.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:24.672Z,1520530824.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:24.687Z,1520530824.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:25.078Z,1520530825.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:25.098Z,1520530825.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:25.481Z,1520530825.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:25.496Z,1520530825.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:25.880Z,1520530825.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:25.895Z,1520530825.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:26.275Z,1520530826.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:26.290Z,1520530826.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:26.670Z,1520530826.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:26.702Z,1520530826.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:27.080Z,1520530827.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:27.095Z,1520530827.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:27.480Z,1520530827.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:27.495Z,1520530827.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:27.879Z,1520530827.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:27.902Z,1520530827.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:28.271Z,1520530828.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:28.286Z,1520530828.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:28.667Z,1520530828.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:28.687Z,1520530828.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:29.077Z,1520530829.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:29.105Z,1520530829.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:29.484Z,1520530829.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:29.499Z,1520530829.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:29.884Z,1520530829.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:29.899Z,1520530829.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:30.275Z,1520530830.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:30.291Z,1520530830.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:30.675Z,1520530830.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:30.690Z,1520530830.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:31.084Z,1520530831.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:31.099Z,1520530831.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:31.484Z,1520530831.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:31.506Z,1520530831.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:31.884Z,1520530831.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:31.899Z,1520530831.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:32.275Z,1520530832.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:32.291Z,1520530832.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:32.669Z,1520530832.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:32.688Z,1520530832.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:33.075Z,1520530833.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:33.095Z,1520530833.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:33.481Z,1520530833.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:33.497Z,1520530833.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:33.884Z,1520530833.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:33.906Z,1520530833.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:34.276Z,1520530834.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:34.291Z,1520530834.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:34.660Z,1520530834.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:34.688Z,1520530834.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:35.080Z,1520530835.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:35.096Z,1520530835.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:35.484Z,1520530835.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:35.499Z,1520530835.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:35.884Z,1520530835.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:35.899Z,1520530835.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:36.271Z,1520530836.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:36.290Z,1520530836.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:36.669Z,1520530836.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:36.694Z,1520530836.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:37.084Z,1520530837.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:37.099Z,1520530837.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:37.483Z,1520530837.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:37.499Z,1520530837.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:37.885Z,1520530837.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:37.899Z,1520530837.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:38.277Z,1520530838.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:38.292Z,1520530838.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:38.669Z,1520530838.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:38.688Z,1520530838.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:39.075Z,1520530839.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:39.095Z,1520530839.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:39.485Z,1520530839.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:39.500Z,1520530839.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:39.884Z,1520530839.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:39.899Z,1520530839.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:40.272Z,1520530840.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:40.288Z,1520530840.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:40.660Z,1520530840.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:40.687Z,1520530840.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:41.084Z,1520530841.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:41.100Z,1520530841.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:41.484Z,1520530841.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:41.499Z,1520530841.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:41.884Z,1520530841.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:41.900Z,1520530841.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:42.276Z,1520530842.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:42.291Z,1520530842.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:42.670Z,1520530842.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:42.695Z,1520530842.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:43.086Z,1520530843.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:43.106Z,1520530843.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:43.485Z,1520530843.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:43.500Z,1520530843.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:43.886Z,1520530843.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:43.901Z,1520530843.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:44.269Z,1520530844.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:44.289Z,1520530844.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:44.678Z,1520530844.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:44.694Z,1520530844.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:45.082Z,1520530845.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:45.098Z,1520530845.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:45.480Z,1520530845.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:45.503Z,1520530845.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:45.885Z,1520530845.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:45.907Z,1520530845.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:46.273Z,1520530846.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:46.287Z,1520530846.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:46.669Z,1520530846.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:46.695Z,1520530846.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:47.086Z,1520530847.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:47.102Z,1520530847.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:47.488Z,1520530847.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:47.503Z,1520530847.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:47.872Z,1520530847.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:47.911Z,1520530847.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:48.275Z,1520530848.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:48.291Z,1520530848.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:48.662Z,1520530848.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:48.689Z,1520530848.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:49.078Z,1520530849.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:49.101Z,1520530849.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:49.487Z,1520530849.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:49.503Z,1520530849.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:49.886Z,1520530849.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:49.901Z,1520530849.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:50.275Z,1520530850.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:50.290Z,1520530850.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:50.675Z,1520530850.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:50.690Z,1520530850.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:51.085Z,1520530851.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:51.106Z,1520530851.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:51.473Z,1520530851.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:51.495Z,1520530851.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:51.884Z,1520530851.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:51.899Z,1520530851.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:52.275Z,1520530852.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:52.290Z,1520530852.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:52.661Z,1520530852.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:52.693Z,1520530852.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:53.085Z,1520530853.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:53.106Z,1520530853.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:53.489Z,1520530853.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:53.504Z,1520530853.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:53.881Z,1520530853.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:53.896Z,1520530853.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:54.263Z,1520530854.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:54.294Z,1520530854.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:54.658Z,1520530854.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:54.695Z,1520530854.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:55.084Z,1520530855.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:55.099Z,1520530855.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:55.489Z,1520530855.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:55.504Z,1520530855.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:55.885Z,1520530855.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:55.900Z,1520530855.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:56.264Z,1520530856.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:56.290Z,1520530856.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:56.662Z,1520530856.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:56.694Z,1520530856.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:57.077Z,1520530857.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:57.096Z,1520530857.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:57.473Z,1520530857.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:57.497Z,1520530857.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:57.881Z,1520530857.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:57.896Z,1520530857.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:58.263Z,1520530858.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:58.289Z,1520530858.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:58.656Z,1520530858.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:58.679Z,1520530858.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:59.085Z,1520530859.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:59.100Z,1520530859.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:59.486Z,1520530859.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:59.501Z,1520530859.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:40:59.885Z,1520530859.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:40:59.900Z,1520530859.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:00.264Z,1520530860.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:00.312Z,1520530860.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:00.664Z,1520530860.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:00.714Z,1520530860.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:01.075Z,1520530861.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:01.114Z,1520530861.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:01.479Z,1520530861.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:01.514Z,1520530861.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:01.883Z,1520530861.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:01.919Z,1520530861.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:02.266Z,1520530862.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:02.311Z,1520530862.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:02.664Z,1520530862.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:02.683Z,1520530862.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:03.084Z,1520530863.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:03.111Z,1520530863.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:06.169Z,1520530866.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:06.185Z,1520530866.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:06.289Z,1520530866.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:06.321Z,1520530866.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:06.670Z,1520530866.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:06.686Z,1520530866.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:07.058Z,1520530867.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:07.082Z,1520530867.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:07.472Z,1520530867.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:07.488Z,1520530867.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:07.871Z,1520530867.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:07.887Z,1520530867.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:08.274Z,1520530868.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:08.289Z,1520530868.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:08.677Z,1520530868.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:08.693Z,1520530868.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:09.074Z,1520530869.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:09.094Z,1520530869.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:09.464Z,1520530869.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:09.480Z,1520530869.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:09.865Z,1520530869.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:09.881Z,1520530869.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:10.267Z,1520530870.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:10.282Z,1520530870.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:10.664Z,1520530870.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:10.680Z,1520530870.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:11.071Z,1520530871.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:11.087Z,1520530871.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:11.473Z,1520530871.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:11.489Z,1520530871.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:11.872Z,1520530871.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:11.887Z,1520530871.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:12.273Z,1520530872.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:12.289Z,1520530872.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:12.666Z,1520530872.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:12.685Z,1520530872.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:13.070Z,1520530873.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:13.086Z,1520530873.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:13.466Z,1520530873.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:13.484Z,1520530873.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:13.872Z,1520530873.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:13.887Z,1520530873.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:14.270Z,1520530874.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:14.290Z,1520530874.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:14.677Z,1520530874.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:14.693Z,1520530874.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:15.073Z,1520530875.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:15.089Z,1520530875.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:15.466Z,1520530875.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:15.481Z,1520530875.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:15.866Z,1520530875.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:15.882Z,1520530875.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:16.272Z,1520530876.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:16.287Z,1520530876.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:16.671Z,1520530876.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:16.687Z,1520530876.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:17.073Z,1520530877.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:17.089Z,1520530877.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:17.473Z,1520530877.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:17.489Z,1520530877.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:17.874Z,1520530877.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:17.889Z,1520530877.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:18.270Z,1520530878.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:18.286Z,1520530878.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:18.666Z,1520530878.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:18.687Z,1520530878.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:19.073Z,1520530879.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:19.089Z,1520530879.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:19.473Z,1520530879.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:19.489Z,1520530879.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:19.874Z,1520530879.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:19.889Z,1520530879.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:20.268Z,1520530880.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:20.284Z,1520530880.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:20.671Z,1520530880.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:20.688Z,1520530880.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:21.086Z,1520530881.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:21.119Z,1520530881.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:21.478Z,1520530881.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:21.493Z,1520530881.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:21.873Z,1520530881.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:21.894Z,1520530881.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:22.272Z,1520530882.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:22.294Z,1520530882.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:22.671Z,1520530882.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:22.687Z,1520530882.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:23.073Z,1520530883.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:23.095Z,1520530883.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:23.477Z,1520530883.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:23.493Z,1520530883.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:23.874Z,1520530883.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:23.889Z,1520530883.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:24.271Z,1520530884.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:24.287Z,1520530884.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:24.671Z,1520530884.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:24.687Z,1520530884.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:25.074Z,1520530885.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:25.090Z,1520530885.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:25.474Z,1520530885.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:25.489Z,1520530885.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:25.872Z,1520530885.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:25.888Z,1520530885.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:26.271Z,1520530886.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:26.287Z,1520530886.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:26.670Z,1520530886.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:26.686Z,1520530886.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:27.072Z,1520530887.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:27.088Z,1520530887.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:27.477Z,1520530887.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:27.494Z,1520530887.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:27.871Z,1520530887.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:27.887Z,1520530887.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:28.271Z,1520530888.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:28.286Z,1520530888.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:28.666Z,1520530888.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:28.686Z,1520530888.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:29.066Z,1520530889.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:29.086Z,1520530889.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:29.472Z,1520530889.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:29.487Z,1520530889.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:29.877Z,1520530889.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:29.893Z,1520530889.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:30.272Z,1520530890.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:30.287Z,1520530890.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:30.667Z,1520530890.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:30.682Z,1520530890.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:31.070Z,1520530891.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:31.090Z,1520530891.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:31.470Z,1520530891.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:31.485Z,1520530891.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:31.867Z,1520530891.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:31.881Z,1520530891.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:32.273Z,1520530892.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:32.290Z,1520530892.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:32.677Z,1520530892.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:32.693Z,1520530892.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:33.073Z,1520530893.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:33.088Z,1520530893.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:33.470Z,1520530893.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:33.486Z,1520530893.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:33.870Z,1520530893.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:33.885Z,1520530893.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:34.270Z,1520530894.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:34.285Z,1520530894.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:34.670Z,1520530894.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:34.686Z,1520530894.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:35.072Z,1520530895.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:35.088Z,1520530895.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:35.473Z,1520530895.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:35.488Z,1520530895.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:35.874Z,1520530895.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:35.889Z,1520530895.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:36.266Z,1520530896.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:36.289Z,1520530896.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:36.671Z,1520530896.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:36.686Z,1520530896.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:37.077Z,1520530897.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:37.092Z,1520530897.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:37.474Z,1520530897.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:37.495Z,1520530897.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:37.877Z,1520530897.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:37.891Z,1520530897.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:38.271Z,1520530898.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:38.287Z,1520530898.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:38.670Z,1520530898.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:38.691Z,1520530898.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:39.076Z,1520530899.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:39.091Z,1520530899.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:39.477Z,1520530899.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:39.493Z,1520530899.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:39.875Z,1520530899.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:39.894Z,1520530899.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:40.272Z,1520530900.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:40.287Z,1520530900.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:40.670Z,1520530900.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:40.690Z,1520530900.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:41.080Z,1520530901.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:41.095Z,1520530901.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:41.480Z,1520530901.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:41.495Z,1520530901.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:41.881Z,1520530901.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:41.896Z,1520530901.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:42.265Z,1520530902.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:42.285Z,1520530902.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:42.668Z,1520530902.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:42.683Z,1520530902.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:43.080Z,1520530903.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:43.096Z,1520530903.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:43.479Z,1520530903.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:43.502Z,1520530903.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:43.880Z,1520530903.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:43.895Z,1520530903.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:44.271Z,1520530904.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:44.287Z,1520530904.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:44.662Z,1520530904.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:44.686Z,1520530904.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:45.078Z,1520530905.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:45.093Z,1520530905.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:45.480Z,1520530905.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:45.495Z,1520530905.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:45.880Z,1520530905.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:45.895Z,1520530905.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:46.271Z,1520530906.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:46.287Z,1520530906.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:46.670Z,1520530906.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:46.691Z,1520530906.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:47.076Z,1520530907.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:47.092Z,1520530907.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:47.481Z,1520530907.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:47.495Z,1520530907.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:47.880Z,1520530907.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:47.895Z,1520530907.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:48.271Z,1520530908.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:48.287Z,1520530908.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:48.665Z,1520530908.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:48.691Z,1520530908.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:49.080Z,1520530909.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:49.096Z,1520530909.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:49.480Z,1520530909.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:49.507Z,1520530909.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:49.882Z,1520530909.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:49.897Z,1520530909.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:50.271Z,1520530910.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:50.287Z,1520530910.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:50.659Z,1520530910.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:50.703Z,1520530910.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:51.062Z,1520530911.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:51.088Z,1520530911.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:51.481Z,1520530911.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:51.496Z,1520530911.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:51.881Z,1520530911.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:51.896Z,1520530911.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:52.286Z,1520530912.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:52.301Z,1520530912.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:52.662Z,1520530912.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:52.688Z,1520530912.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:53.058Z,1520530913.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:53.084Z,1520530913.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:53.455Z,1520530913.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:53.486Z,1520530913.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:53.862Z,1520530913.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:53.889Z,1520530913.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:54.282Z,1520530914.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:54.297Z,1520530914.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:54.681Z,1520530914.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:54.696Z,1520530914.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:55.081Z,1520530915.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:55.096Z,1520530915.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:55.458Z,1520530915.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:55.490Z,1520530915.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:55.858Z,1520530915.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:55.887Z,1520530915.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:56.263Z,1520530916.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:56.291Z,1520530916.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:56.305Z,1520530916.305 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T17:41:56.662Z,1520530916.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:56.689Z,1520530916.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:57.082Z,1520530917.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:57.097Z,1520530917.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:57.485Z,1520530917.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:57.500Z,1520530917.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:57.876Z,1520530917.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:57.899Z,1520530917.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:58.263Z,1520530918.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:58.290Z,1520530918.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:58.661Z,1520530918.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:58.687Z,1520530918.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:58.701Z,1520530918.701 [CBIT](INFO): Clearing failed state for component DropWeight
2018-03-08T17:41:58.701Z,1520530918.701 [DropWeight] No Fault, FailCount= 1
2018-03-08T17:41:59.079Z,1520530919.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:59.095Z,1520530919.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:59.482Z,1520530919.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:59.497Z,1520530919.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:41:59.882Z,1520530919.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:41:59.897Z,1520530919.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:00.259Z,1520530920.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:00.286Z,1520530920.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:00.659Z,1520530920.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:00.688Z,1520530920.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:01.057Z,1520530921.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:01.093Z,1520530921.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:01.489Z,1520530921.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:01.510Z,1520530921.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:01.887Z,1520530921.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:01.902Z,1520530921.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:02.282Z,1520530922.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:02.297Z,1520530922.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:02.663Z,1520530922.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:02.690Z,1520530922.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:03.055Z,1520530923.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:03.090Z,1520530923.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:03.463Z,1520530923.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:03.491Z,1520530923.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:06.577Z,1520530926.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:06.595Z,1520530926.595 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:06.595Z,1520530926.595 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 199
2018-03-08T17:42:06.595Z,1520530926.595 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T17:42:06.597Z,1520530926.597 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:06.597Z,1520530926.597 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 199
2018-03-08T17:42:06.597Z,1520530926.597 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T17:42:06.599Z,1520530926.599 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:06.599Z,1520530926.599 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 199
2018-03-08T17:42:06.599Z,1520530926.599 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T17:42:06.610Z,1520530926.610 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T17:42:06.610Z,1520530926.610 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T17:42:06.610Z,1520530926.610 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T17:42:06.706Z,1520530926.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:06.761Z,1520530926.761 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T17:42:06.761Z,1520530926.761 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 199
2018-03-08T17:42:06.762Z,1520530926.762 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T17:42:06.762Z,1520530926.762 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 199
2018-03-08T17:42:06.762Z,1520530926.762 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T17:42:06.763Z,1520530926.763 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 199
2018-03-08T17:42:07.069Z,1520530927.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:07.097Z,1520530927.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T17:42:07.098Z,1520530927.098 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:42:07.098Z,1520530927.098 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:42:07.099Z,1520530927.099 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T17:42:07.099Z,1520530927.099 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:42:07.099Z,1520530927.099 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:42:07.100Z,1520530927.100 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T17:42:07.100Z,1520530927.100 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:42:07.100Z,1520530927.100 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:42:07.457Z,1520530927.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:07.494Z,1520530927.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-03-08T17:42:07.495Z,1520530927.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:07.852Z,1520530927.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:07.874Z,1520530927.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-03-08T17:42:07.875Z,1520530927.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:08.250Z,1520530928.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:08.265Z,1520530928.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-03-08T17:42:08.266Z,1520530928.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:08.652Z,1520530928.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:08.666Z,1520530928.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-03-08T17:42:08.667Z,1520530928.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:09.050Z,1520530929.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:09.065Z,1520530929.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-03-08T17:42:09.066Z,1520530929.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:09.453Z,1520530929.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:09.468Z,1520530929.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-03-08T17:42:09.469Z,1520530929.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:09.865Z,1520530929.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:09.896Z,1520530929.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-03-08T17:42:09.897Z,1520530929.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:10.253Z,1520530930.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:10.268Z,1520530930.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-08T17:42:10.269Z,1520530930.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:10.652Z,1520530930.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:10.667Z,1520530930.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-03-08T17:42:10.668Z,1520530930.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:11.052Z,1520530931.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:11.066Z,1520530931.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-03-08T17:42:11.067Z,1520530931.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:11.453Z,1520530931.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:11.468Z,1520530931.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-08T17:42:11.469Z,1520530931.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:11.851Z,1520530931.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:11.874Z,1520530931.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-08T17:42:11.875Z,1520530931.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:12.265Z,1520530932.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:12.280Z,1520530932.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T17:42:12.303Z,1520530932.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:12.652Z,1520530932.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:12.674Z,1520530932.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T17:42:12.675Z,1520530932.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:13.065Z,1520530933.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:13.080Z,1520530933.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-08T17:42:13.097Z,1520530933.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:13.455Z,1520530933.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:13.470Z,1520530933.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-08T17:42:13.471Z,1520530933.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:13.854Z,1520530933.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:13.869Z,1520530933.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-08T17:42:13.870Z,1520530933.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:14.251Z,1520530934.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:14.266Z,1520530934.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-08T17:42:14.266Z,1520530934.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:14.655Z,1520530934.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:14.670Z,1520530934.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-08T17:42:14.671Z,1520530934.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:15.054Z,1520530935.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:15.074Z,1520530935.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-08T17:42:15.075Z,1520530935.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:15.457Z,1520530935.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:15.472Z,1520530935.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-08T17:42:15.473Z,1520530935.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:15.857Z,1520530935.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:15.871Z,1520530935.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-08T17:42:15.872Z,1520530935.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:16.257Z,1520530936.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:16.272Z,1520530936.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-08T17:42:16.274Z,1520530936.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:16.656Z,1520530936.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:16.670Z,1520530936.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T17:42:16.671Z,1520530936.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:17.051Z,1520530937.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:17.066Z,1520530937.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-08T17:42:17.067Z,1520530937.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:17.454Z,1520530937.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:17.475Z,1520530937.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T17:42:17.476Z,1520530937.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:17.851Z,1520530937.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:17.866Z,1520530937.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T17:42:17.867Z,1520530937.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:18.261Z,1520530938.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:18.276Z,1520530938.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T17:42:18.277Z,1520530938.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:18.656Z,1520530938.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:18.671Z,1520530938.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T17:42:18.673Z,1520530938.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:19.056Z,1520530939.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:19.071Z,1520530939.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T17:42:19.072Z,1520530939.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:19.454Z,1520530939.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:19.468Z,1520530939.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-08T17:42:19.469Z,1520530939.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:19.854Z,1520530939.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:19.869Z,1520530939.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-08T17:42:19.870Z,1520530939.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:20.252Z,1520530940.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:20.267Z,1520530940.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-08T17:42:20.268Z,1520530940.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:20.656Z,1520530940.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:20.670Z,1520530940.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-08T17:42:20.671Z,1520530940.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:21.055Z,1520530941.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:21.070Z,1520530941.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-08T17:42:21.071Z,1520530941.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:21.457Z,1520530941.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:21.473Z,1520530941.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T17:42:21.474Z,1520530941.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:21.857Z,1520530941.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:21.878Z,1520530941.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-08T17:42:21.879Z,1520530941.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:22.256Z,1520530942.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:22.278Z,1520530942.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T17:42:22.279Z,1520530942.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:22.651Z,1520530942.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:22.665Z,1520530942.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T17:42:22.666Z,1520530942.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:23.055Z,1520530943.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:23.078Z,1520530943.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T17:42:23.079Z,1520530943.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:23.455Z,1520530943.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:23.469Z,1520530943.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T17:42:23.470Z,1520530943.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:23.854Z,1520530943.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:23.869Z,1520530943.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-08T17:42:23.870Z,1520530943.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:24.261Z,1520530944.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:24.278Z,1520530944.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T17:42:24.279Z,1520530944.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:24.657Z,1520530944.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:24.671Z,1520530944.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-08T17:42:24.673Z,1520530944.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:25.058Z,1520530945.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:25.073Z,1520530945.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-08T17:42:25.074Z,1520530945.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:25.455Z,1520530945.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:25.470Z,1520530945.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T17:42:25.471Z,1520530945.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:25.851Z,1520530945.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:25.874Z,1520530945.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T17:42:25.875Z,1520530945.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:26.251Z,1520530946.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:26.266Z,1520530946.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T17:42:26.267Z,1520530946.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:26.656Z,1520530946.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:26.671Z,1520530946.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:27.051Z,1520530947.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:27.075Z,1520530947.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:27.457Z,1520530947.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:27.473Z,1520530947.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:27.857Z,1520530947.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:27.873Z,1520530947.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:28.256Z,1520530948.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:28.279Z,1520530948.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:28.651Z,1520530948.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:28.666Z,1520530948.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:29.055Z,1520530949.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:29.071Z,1520530949.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:29.455Z,1520530949.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:29.471Z,1520530949.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:29.855Z,1520530949.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:29.871Z,1520530949.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:30.257Z,1520530950.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:30.273Z,1520530950.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:30.661Z,1520530950.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:30.677Z,1520530950.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:31.069Z,1520530951.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:31.103Z,1520530951.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:31.449Z,1520530951.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:31.477Z,1520530951.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:31.856Z,1520530951.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:31.871Z,1520530951.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:32.255Z,1520530952.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:32.271Z,1520530952.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:32.651Z,1520530952.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:32.671Z,1520530952.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:33.055Z,1520530953.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:33.070Z,1520530953.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:33.460Z,1520530953.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:33.476Z,1520530953.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:33.861Z,1520530953.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:33.877Z,1520530953.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:34.261Z,1520530954.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:34.277Z,1520530954.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:34.653Z,1520530954.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:34.669Z,1520530954.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:35.057Z,1520530955.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:35.072Z,1520530955.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:35.457Z,1520530955.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:35.472Z,1520530955.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:35.861Z,1520530955.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:35.876Z,1520530955.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:36.262Z,1520530956.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:36.278Z,1520530956.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:36.662Z,1520530956.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:36.679Z,1520530956.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:37.062Z,1520530957.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:37.077Z,1520530957.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:37.457Z,1520530957.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:37.473Z,1520530957.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:37.855Z,1520530957.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:37.879Z,1520530957.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:38.253Z,1520530958.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:38.268Z,1520530958.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:38.658Z,1520530958.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:38.679Z,1520530958.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:39.056Z,1520530959.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:39.071Z,1520530959.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:39.462Z,1520530959.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:39.479Z,1520530959.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:39.862Z,1520530959.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:39.878Z,1520530959.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:40.261Z,1520530960.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:40.276Z,1520530960.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:40.656Z,1520530960.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:40.671Z,1520530960.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:41.057Z,1520530961.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:41.072Z,1520530961.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:41.456Z,1520530961.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:41.472Z,1520530961.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:41.851Z,1520530961.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:41.867Z,1520530961.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:42.261Z,1520530962.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:42.277Z,1520530962.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:42.661Z,1520530962.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:42.677Z,1520530962.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:43.060Z,1520530963.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:43.102Z,1520530963.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:43.455Z,1520530963.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:43.471Z,1520530963.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:43.851Z,1520530963.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:43.866Z,1520530963.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:44.245Z,1520530964.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:44.273Z,1520530964.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:44.638Z,1520530964.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:44.665Z,1520530964.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:45.054Z,1520530965.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:45.075Z,1520530965.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:45.461Z,1520530965.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:45.476Z,1520530965.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:45.864Z,1520530965.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:45.879Z,1520530965.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:46.266Z,1520530966.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:46.286Z,1520530966.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:46.655Z,1520530966.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:46.675Z,1520530966.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:47.052Z,1520530967.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:47.074Z,1520530967.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:47.456Z,1520530967.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:47.471Z,1520530967.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:47.851Z,1520530967.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:47.870Z,1520530967.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:48.265Z,1520530968.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:48.280Z,1520530968.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:48.664Z,1520530968.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:48.679Z,1520530968.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:49.064Z,1520530969.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:49.086Z,1520530969.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:49.455Z,1520530969.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:49.471Z,1520530969.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:49.855Z,1520530969.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:49.875Z,1520530969.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:50.259Z,1520530970.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:50.279Z,1520530970.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:50.652Z,1520530970.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:50.667Z,1520530970.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:51.052Z,1520530971.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:51.067Z,1520530971.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:51.461Z,1520530971.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:51.479Z,1520530971.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:51.865Z,1520530971.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:51.880Z,1520530971.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:52.264Z,1520530972.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:52.279Z,1520530972.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:52.651Z,1520530972.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:52.670Z,1520530972.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:53.039Z,1520530973.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:53.066Z,1520530973.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:53.456Z,1520530973.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:53.479Z,1520530973.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:53.855Z,1520530973.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:53.875Z,1520530973.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:54.262Z,1520530974.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:54.277Z,1520530974.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:54.664Z,1520530974.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:54.679Z,1520530974.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:55.064Z,1520530975.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:55.086Z,1520530975.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:55.455Z,1520530975.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:55.470Z,1520530975.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:55.852Z,1520530975.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:55.867Z,1520530975.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:56.251Z,1520530976.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:56.270Z,1520530976.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:56.652Z,1520530976.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:56.667Z,1520530976.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:57.055Z,1520530977.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:57.070Z,1520530977.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:57.461Z,1520530977.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:57.476Z,1520530977.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:57.866Z,1520530977.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:57.881Z,1520530977.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:58.264Z,1520530978.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:58.280Z,1520530978.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:58.651Z,1520530978.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:58.671Z,1520530978.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:59.051Z,1520530979.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:59.074Z,1520530979.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:59.456Z,1520530979.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:59.471Z,1520530979.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:42:59.858Z,1520530979.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:42:59.879Z,1520530979.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:00.265Z,1520530980.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:00.280Z,1520530980.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:00.664Z,1520530980.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:00.680Z,1520530980.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:01.065Z,1520530981.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:01.080Z,1520530981.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:01.457Z,1520530981.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:01.486Z,1520530981.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:01.851Z,1520530981.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:01.867Z,1520530981.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:02.251Z,1520530982.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:02.270Z,1520530982.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:02.653Z,1520530982.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:02.668Z,1520530982.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:03.055Z,1520530983.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:03.070Z,1520530983.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:03.461Z,1520530983.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:03.476Z,1520530983.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:03.864Z,1520530983.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:03.879Z,1520530983.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:06.973Z,1520530986.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:07.010Z,1520530987.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:07.093Z,1520530987.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:07.118Z,1520530987.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:07.479Z,1520530987.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:07.494Z,1520530987.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:07.873Z,1520530987.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:07.888Z,1520530987.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:08.276Z,1520530988.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:08.291Z,1520530988.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:08.678Z,1520530988.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:08.694Z,1520530988.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:09.090Z,1520530989.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:09.114Z,1520530989.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:09.493Z,1520530989.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:09.522Z,1520530989.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:09.889Z,1520530989.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:09.918Z,1520530989.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:10.279Z,1520530990.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:10.316Z,1520530990.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:10.678Z,1520530990.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:10.715Z,1520530990.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:11.089Z,1520530991.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:11.122Z,1520530991.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:11.489Z,1520530991.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:11.525Z,1520530991.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:11.885Z,1520530991.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:11.901Z,1520530991.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:12.281Z,1520530992.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:12.296Z,1520530992.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:12.676Z,1520530992.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:12.692Z,1520530992.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:13.089Z,1520530993.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:13.117Z,1520530993.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:13.494Z,1520530993.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:13.530Z,1520530993.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:13.894Z,1520530993.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:13.925Z,1520530993.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:14.282Z,1520530994.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:14.302Z,1520530994.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:14.683Z,1520530994.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:14.697Z,1520530994.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:15.086Z,1520530995.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:15.101Z,1520530995.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:15.485Z,1520530995.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:15.501Z,1520530995.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:15.885Z,1520530995.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:15.900Z,1520530995.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:16.286Z,1520530996.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:16.301Z,1520530996.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:16.679Z,1520530996.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:16.702Z,1520530996.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:17.086Z,1520530997.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:17.101Z,1520530997.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:17.489Z,1520530997.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:17.505Z,1520530997.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:17.886Z,1520530997.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:17.901Z,1520530997.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:18.278Z,1520530998.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:18.298Z,1520530998.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:18.684Z,1520530998.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:18.699Z,1520530998.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:19.091Z,1520530999.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:19.107Z,1520530999.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:19.489Z,1520530999.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:19.504Z,1520530999.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:19.886Z,1520530999.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:19.902Z,1520530999.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:20.283Z,1520531000.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:20.299Z,1520531000.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:20.681Z,1520531000.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:20.696Z,1520531000.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:21.085Z,1520531001.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:21.100Z,1520531001.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:21.486Z,1520531001.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:21.501Z,1520531001.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:21.886Z,1520531001.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:21.906Z,1520531001.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:22.278Z,1520531002.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:22.293Z,1520531002.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:22.679Z,1520531002.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:22.702Z,1520531002.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:23.085Z,1520531003.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:23.102Z,1520531003.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:23.484Z,1520531003.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:23.611Z,1520531003.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:23.885Z,1520531003.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:23.901Z,1520531003.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:24.276Z,1520531004.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:24.291Z,1520531004.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:24.678Z,1520531004.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:24.698Z,1520531004.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:25.086Z,1520531005.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:25.101Z,1520531005.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:25.485Z,1520531005.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:25.560Z,1520531005.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:25.886Z,1520531005.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:25.901Z,1520531005.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:26.277Z,1520531006.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:26.307Z,1520531006.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:26.684Z,1520531006.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:26.699Z,1520531006.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:27.088Z,1520531007.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:27.104Z,1520531007.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:27.489Z,1520531007.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:27.505Z,1520531007.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:27.890Z,1520531007.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:27.905Z,1520531007.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:28.284Z,1520531008.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:28.299Z,1520531008.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:28.683Z,1520531008.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:28.698Z,1520531008.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:29.089Z,1520531009.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:29.104Z,1520531009.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:29.486Z,1520531009.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:29.514Z,1520531009.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:29.888Z,1520531009.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:29.903Z,1520531009.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:30.284Z,1520531010.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:30.299Z,1520531010.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:30.673Z,1520531010.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:30.697Z,1520531010.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:31.089Z,1520531011.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:31.105Z,1520531011.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:31.489Z,1520531011.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:31.504Z,1520531011.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:31.889Z,1520531011.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:31.904Z,1520531011.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:32.279Z,1520531012.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:32.302Z,1520531012.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:32.684Z,1520531012.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:32.699Z,1520531012.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:33.089Z,1520531013.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:33.104Z,1520531013.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:33.489Z,1520531013.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:33.505Z,1520531013.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:33.889Z,1520531013.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:33.904Z,1520531013.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:34.284Z,1520531014.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:34.299Z,1520531014.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:34.682Z,1520531014.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:34.703Z,1520531014.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:35.089Z,1520531015.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:35.104Z,1520531015.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:35.484Z,1520531015.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:35.500Z,1520531015.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:35.888Z,1520531015.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:35.903Z,1520531015.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:36.284Z,1520531016.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:36.299Z,1520531016.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:36.676Z,1520531016.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:36.698Z,1520531016.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:37.088Z,1520531017.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:37.103Z,1520531017.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:37.488Z,1520531017.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:37.503Z,1520531017.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:37.886Z,1520531017.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:37.906Z,1520531017.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:38.277Z,1520531018.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:38.305Z,1520531018.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:38.684Z,1520531018.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:38.699Z,1520531018.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:39.092Z,1520531019.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:39.114Z,1520531019.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:39.497Z,1520531019.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:39.518Z,1520531019.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:39.890Z,1520531019.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:39.904Z,1520531019.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:40.284Z,1520531020.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:40.299Z,1520531020.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:40.670Z,1520531020.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:40.702Z,1520531020.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:41.094Z,1520531021.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:41.109Z,1520531021.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:41.483Z,1520531021.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:41.511Z,1520531021.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:41.893Z,1520531021.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:41.908Z,1520531021.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:42.272Z,1520531022.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:42.303Z,1520531022.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:42.665Z,1520531022.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:42.680Z,1520531022.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:43.081Z,1520531023.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:43.108Z,1520531023.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:43.494Z,1520531023.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:43.509Z,1520531023.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:43.893Z,1520531023.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:43.909Z,1520531023.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:44.271Z,1520531024.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:44.307Z,1520531024.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:44.670Z,1520531024.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:44.708Z,1520531024.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:45.094Z,1520531025.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:45.109Z,1520531025.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:45.493Z,1520531025.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:45.511Z,1520531025.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:45.894Z,1520531025.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:45.909Z,1520531025.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:46.275Z,1520531026.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:46.308Z,1520531026.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:46.674Z,1520531026.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:46.707Z,1520531026.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:47.098Z,1520531027.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:47.118Z,1520531027.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:47.481Z,1520531027.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:47.519Z,1520531027.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:47.886Z,1520531027.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:47.914Z,1520531027.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:48.276Z,1520531028.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:48.303Z,1520531028.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:48.668Z,1520531028.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:48.683Z,1520531028.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:49.090Z,1520531029.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:49.117Z,1520531029.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:49.485Z,1520531029.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:49.512Z,1520531029.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:49.885Z,1520531029.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:49.912Z,1520531029.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:50.279Z,1520531030.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:50.311Z,1520531030.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:50.679Z,1520531030.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:50.694Z,1520531030.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:51.086Z,1520531031.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:51.117Z,1520531031.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:51.493Z,1520531031.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:51.522Z,1520531031.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:51.889Z,1520531031.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:51.922Z,1520531031.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:52.272Z,1520531032.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:52.288Z,1520531032.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:52.678Z,1520531032.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:52.715Z,1520531032.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:53.085Z,1520531033.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:53.100Z,1520531033.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:53.481Z,1520531033.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:53.497Z,1520531033.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:53.889Z,1520531033.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:53.925Z,1520531033.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:54.277Z,1520531034.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:54.292Z,1520531034.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:54.669Z,1520531034.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:54.696Z,1520531034.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:55.093Z,1520531035.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:55.122Z,1520531035.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:55.489Z,1520531035.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:55.504Z,1520531035.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:55.887Z,1520531035.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:55.902Z,1520531035.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:56.281Z,1520531036.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:56.297Z,1520531036.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:56.681Z,1520531036.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:56.696Z,1520531036.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:57.086Z,1520531037.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:57.102Z,1520531037.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:57.490Z,1520531037.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:57.505Z,1520531037.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:57.885Z,1520531037.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:57.901Z,1520531037.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:58.285Z,1520531038.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:58.301Z,1520531038.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:58.684Z,1520531038.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:58.699Z,1520531038.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:59.085Z,1520531039.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:59.100Z,1520531039.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:59.486Z,1520531039.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:59.501Z,1520531039.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:43:59.885Z,1520531039.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:43:59.901Z,1520531039.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:00.277Z,1520531040.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:00.292Z,1520531040.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:00.672Z,1520531040.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:00.700Z,1520531040.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:01.089Z,1520531041.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:01.104Z,1520531041.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:01.494Z,1520531041.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:01.509Z,1520531041.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:01.893Z,1520531041.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:01.908Z,1520531041.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:02.285Z,1520531042.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:02.300Z,1520531042.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:02.666Z,1520531042.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:02.702Z,1520531042.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:03.093Z,1520531043.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:03.114Z,1520531043.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:03.118Z,1520531043.118 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T17:39:02.7Z
2018-03-08T17:44:03.118Z,1520531043.118 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T17:44:03.118Z,1520531043.118 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T17:44:03.499Z,1520531043.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:03.514Z,1520531043.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:03.985Z,1520531043.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:03.000Z,1520531044.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:06.992Z,1520531046.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:07.014Z,1520531047.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:07.105Z,1520531047.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:07.147Z,1520531047.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:07.461Z,1520531047.461 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180308T074127/Courier0232.lzma
2018-03-08T17:44:07.505Z,1520531047.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:07.522Z,1520531047.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:07.896Z,1520531047.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:07.911Z,1520531047.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:08.259Z,1520531048.259 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0232.lzma.bak
2018-03-08T17:44:08.260Z,1520531048.260 [DataOverHttps](INFO): SBD MOMSN=7987776
2018-03-08T17:44:08.303Z,1520531048.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:08.331Z,1520531048.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:08.861Z,1520531048.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:08.875Z,1520531048.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:09.075Z,1520531049.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:09.101Z,1520531049.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:12.192Z,1520531052.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:12.212Z,1520531052.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:12.303Z,1520531052.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:12.350Z,1520531052.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:12.677Z,1520531052.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:12.704Z,1520531052.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:13.073Z,1520531053.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:13.101Z,1520531053.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:13.477Z,1520531053.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:13.504Z,1520531053.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:13.866Z,1520531053.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:13.902Z,1520531053.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:14.263Z,1520531054.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:14.278Z,1520531054.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:17.357Z,1520531057.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:17.373Z,1520531057.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:17.499Z,1520531057.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:17.515Z,1520531057.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:17.821Z,1520531057.821 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0233.lzma
2018-03-08T17:44:17.861Z,1520531057.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:17.876Z,1520531057.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:18.257Z,1520531058.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:18.272Z,1520531058.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:18.619Z,1520531058.619 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0233.lzma.bak
2018-03-08T17:44:18.620Z,1520531058.620 [DataOverHttps](INFO): SBD MOMSN=7987779
2018-03-08T17:44:18.663Z,1520531058.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:18.678Z,1520531058.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:19.231Z,1520531059.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:19.255Z,1520531059.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:19.259Z,1520531059.259 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T17:44:19.259Z,1520531059.259 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T17:44:19.259Z,1520531059.259 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T17:44:19.444Z,1520531059.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:19.472Z,1520531059.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:22.550Z,1520531062.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:22.565Z,1520531062.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:22.673Z,1520531062.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:22.705Z,1520531062.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:23.033Z,1520531063.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:23.062Z,1520531063.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:23.445Z,1520531063.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:23.460Z,1520531063.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:23.827Z,1520531063.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:23.857Z,1520531063.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:24.272Z,1520531064.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:24.304Z,1520531064.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:24.619Z,1520531064.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:24.655Z,1520531064.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:25.033Z,1520531065.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:25.062Z,1520531065.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:25.433Z,1520531065.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:25.462Z,1520531065.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:25.833Z,1520531065.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:25.854Z,1520531065.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:26.226Z,1520531066.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:26.256Z,1520531066.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:26.625Z,1520531066.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:26.656Z,1520531066.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:27.019Z,1520531067.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:27.034Z,1520531067.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:27.421Z,1520531067.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:27.458Z,1520531067.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:27.837Z,1520531067.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:27.866Z,1520531067.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:28.237Z,1520531068.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:28.260Z,1520531068.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:28.619Z,1520531068.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:28.635Z,1520531068.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:29.020Z,1520531069.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:29.036Z,1520531069.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:29.427Z,1520531069.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:29.444Z,1520531069.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:29.824Z,1520531069.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:29.866Z,1520531069.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:30.238Z,1520531070.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:30.262Z,1520531070.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:30.633Z,1520531070.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:30.666Z,1520531070.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:31.038Z,1520531071.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:31.066Z,1520531071.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:31.421Z,1520531071.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:31.443Z,1520531071.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:31.824Z,1520531071.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:31.839Z,1520531071.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:32.226Z,1520531072.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:32.242Z,1520531072.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:32.629Z,1520531072.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:32.644Z,1520531072.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:33.027Z,1520531073.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:33.041Z,1520531073.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:33.427Z,1520531073.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:33.442Z,1520531073.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:33.829Z,1520531073.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:33.844Z,1520531073.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:34.242Z,1520531074.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:34.265Z,1520531074.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:34.625Z,1520531074.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:34.648Z,1520531074.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:35.030Z,1520531075.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:35.045Z,1520531075.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:35.424Z,1520531075.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:35.440Z,1520531075.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:35.834Z,1520531075.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:35.871Z,1520531075.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:36.229Z,1520531076.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:36.269Z,1520531076.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:36.643Z,1520531076.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:36.659Z,1520531076.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:37.025Z,1520531077.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:37.055Z,1520531077.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:37.417Z,1520531077.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:37.456Z,1520531077.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:37.818Z,1520531077.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:37.856Z,1520531077.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:38.219Z,1520531078.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:38.255Z,1520531078.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:38.625Z,1520531078.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:38.676Z,1520531078.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:39.022Z,1520531079.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:39.055Z,1520531079.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:39.441Z,1520531079.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:39.457Z,1520531079.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:39.849Z,1520531079.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:39.864Z,1520531079.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:40.229Z,1520531080.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:40.256Z,1520531080.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:40.615Z,1520531080.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:40.651Z,1520531080.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:41.023Z,1520531081.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:41.056Z,1520531081.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:41.423Z,1520531081.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:41.459Z,1520531081.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:41.816Z,1520531081.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:41.832Z,1520531081.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:42.243Z,1520531082.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:42.259Z,1520531082.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:42.643Z,1520531082.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:42.658Z,1520531082.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:43.029Z,1520531083.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:43.053Z,1520531083.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:43.420Z,1520531083.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:43.435Z,1520531083.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:43.827Z,1520531083.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:43.865Z,1520531083.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:44.220Z,1520531084.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:44.235Z,1520531084.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:44.620Z,1520531084.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:44.635Z,1520531084.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:45.019Z,1520531085.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:45.034Z,1520531085.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:45.424Z,1520531085.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:45.439Z,1520531085.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:45.838Z,1520531085.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:45.860Z,1520531085.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:46.233Z,1520531086.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:46.266Z,1520531086.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:46.617Z,1520531086.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:46.632Z,1520531086.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:47.026Z,1520531087.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:47.063Z,1520531087.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:47.424Z,1520531087.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:47.439Z,1520531087.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:47.820Z,1520531087.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:47.869Z,1520531087.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:48.237Z,1520531088.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:48.261Z,1520531088.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:48.633Z,1520531088.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:48.665Z,1520531088.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:49.033Z,1520531089.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:49.065Z,1520531089.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:49.424Z,1520531089.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:49.439Z,1520531089.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:49.823Z,1520531089.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:49.838Z,1520531089.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:50.229Z,1520531090.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:50.244Z,1520531090.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:50.627Z,1520531090.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:50.642Z,1520531090.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:51.023Z,1520531091.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:51.039Z,1520531091.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:51.425Z,1520531091.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:51.446Z,1520531091.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:51.841Z,1520531091.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:51.863Z,1520531091.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:52.230Z,1520531092.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:52.244Z,1520531092.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:52.621Z,1520531092.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:52.636Z,1520531092.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:53.022Z,1520531093.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:53.037Z,1520531093.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:53.431Z,1520531093.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:53.470Z,1520531093.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:53.825Z,1520531093.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:53.840Z,1520531093.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:54.237Z,1520531094.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:54.268Z,1520531094.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:54.629Z,1520531094.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:54.645Z,1520531094.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:55.028Z,1520531095.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:55.044Z,1520531095.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:55.426Z,1520531095.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:55.442Z,1520531095.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:55.824Z,1520531095.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:55.840Z,1520531095.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:56.222Z,1520531096.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:56.238Z,1520531096.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:56.623Z,1520531096.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:56.651Z,1520531096.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:57.029Z,1520531097.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:57.050Z,1520531097.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:57.428Z,1520531097.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:57.445Z,1520531097.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:57.829Z,1520531097.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:57.845Z,1520531097.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:58.234Z,1520531098.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:58.249Z,1520531098.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:58.624Z,1520531098.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:58.640Z,1520531098.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:59.026Z,1520531099.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:59.041Z,1520531099.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:59.425Z,1520531099.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:59.441Z,1520531099.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:44:59.831Z,1520531099.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:44:59.850Z,1520531099.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:00.234Z,1520531100.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:00.249Z,1520531100.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:00.633Z,1520531100.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:00.649Z,1520531100.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:01.028Z,1520531101.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:01.044Z,1520531101.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:01.431Z,1520531101.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:01.450Z,1520531101.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:01.829Z,1520531101.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:01.850Z,1520531101.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:02.226Z,1520531102.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:02.242Z,1520531102.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:02.622Z,1520531102.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:02.641Z,1520531102.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:03.032Z,1520531103.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:03.054Z,1520531103.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:03.437Z,1520531103.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:03.452Z,1520531103.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:03.837Z,1520531103.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:03.852Z,1520531103.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:04.237Z,1520531104.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:04.259Z,1520531104.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:04.631Z,1520531104.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:04.646Z,1520531104.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:05.031Z,1520531105.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:05.050Z,1520531105.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:05.426Z,1520531105.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:05.441Z,1520531105.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:05.828Z,1520531105.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:05.844Z,1520531105.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:06.236Z,1520531106.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:06.251Z,1520531106.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:06.637Z,1520531106.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:06.653Z,1520531106.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:07.036Z,1520531107.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:07.058Z,1520531107.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:07.430Z,1520531107.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:07.445Z,1520531107.445 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:07.445Z,1520531107.445 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 200
2018-03-08T17:45:07.445Z,1520531107.445 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T17:45:07.447Z,1520531107.447 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:07.447Z,1520531107.447 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 200
2018-03-08T17:45:07.447Z,1520531107.447 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T17:45:07.449Z,1520531107.449 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:07.449Z,1520531107.449 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 200
2018-03-08T17:45:07.449Z,1520531107.449 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T17:45:07.461Z,1520531107.461 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T17:45:07.461Z,1520531107.461 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T17:45:07.461Z,1520531107.461 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T17:45:07.821Z,1520531107.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:07.865Z,1520531107.865 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T17:45:07.865Z,1520531107.865 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 200
2018-03-08T17:45:07.866Z,1520531107.866 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T17:45:07.866Z,1520531107.866 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 200
2018-03-08T17:45:07.866Z,1520531107.866 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T17:45:07.866Z,1520531107.866 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 200
2018-03-08T17:45:08.221Z,1520531108.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:08.258Z,1520531108.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T17:45:08.258Z,1520531108.258 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:45:08.259Z,1520531108.259 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:45:08.259Z,1520531108.259 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T17:45:08.259Z,1520531108.259 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:45:08.260Z,1520531108.260 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:45:08.260Z,1520531108.260 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T17:45:08.261Z,1520531108.261 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:45:08.261Z,1520531108.261 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:45:08.635Z,1520531108.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:08.650Z,1520531108.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T17:45:08.651Z,1520531108.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:09.015Z,1520531109.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:09.051Z,1520531109.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T17:45:09.052Z,1520531109.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:09.440Z,1520531109.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:09.462Z,1520531109.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T17:45:09.463Z,1520531109.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:09.845Z,1520531109.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:09.859Z,1520531109.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T17:45:09.861Z,1520531109.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:10.238Z,1520531110.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:10.257Z,1520531110.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T17:45:10.258Z,1520531110.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:10.615Z,1520531110.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:10.651Z,1520531110.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T17:45:10.652Z,1520531110.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:11.017Z,1520531111.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:11.054Z,1520531111.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T17:45:11.055Z,1520531111.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:11.415Z,1520531111.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:11.451Z,1520531111.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T17:45:11.452Z,1520531111.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:11.815Z,1520531111.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:11.858Z,1520531111.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T17:45:11.859Z,1520531111.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:12.229Z,1520531112.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:12.255Z,1520531112.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T17:45:12.257Z,1520531112.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:12.630Z,1520531112.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:12.656Z,1520531112.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T17:45:12.657Z,1520531112.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:13.029Z,1520531113.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:13.062Z,1520531113.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T17:45:13.063Z,1520531113.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:13.418Z,1520531113.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:13.453Z,1520531113.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T17:45:13.454Z,1520531113.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:13.818Z,1520531113.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:13.858Z,1520531113.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T17:45:13.859Z,1520531113.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:14.216Z,1520531114.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:14.254Z,1520531114.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T17:45:14.255Z,1520531114.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:14.620Z,1520531114.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:14.651Z,1520531114.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T17:45:14.652Z,1520531114.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:15.023Z,1520531115.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:15.059Z,1520531115.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T17:45:15.060Z,1520531115.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:15.429Z,1520531115.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:15.453Z,1520531115.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T17:45:15.454Z,1520531115.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:15.848Z,1520531115.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:15.864Z,1520531115.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T17:45:15.865Z,1520531115.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:16.242Z,1520531116.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:16.257Z,1520531116.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T17:45:16.258Z,1520531116.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:16.624Z,1520531116.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:16.655Z,1520531116.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T17:45:16.656Z,1520531116.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:17.023Z,1520531117.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:17.058Z,1520531117.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T17:45:17.059Z,1520531117.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:17.427Z,1520531117.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:17.441Z,1520531117.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T17:45:17.442Z,1520531117.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:17.823Z,1520531117.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:17.838Z,1520531117.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T17:45:17.839Z,1520531117.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:18.237Z,1520531118.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:18.266Z,1520531118.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T17:45:18.267Z,1520531118.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:18.625Z,1520531118.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:18.640Z,1520531118.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T17:45:18.641Z,1520531118.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:19.034Z,1520531119.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:19.062Z,1520531119.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T17:45:19.063Z,1520531119.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:19.426Z,1520531119.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:19.462Z,1520531119.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T17:45:19.463Z,1520531119.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:19.820Z,1520531119.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:19.834Z,1520531119.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T17:45:19.835Z,1520531119.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:22.926Z,1520531122.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:22.942Z,1520531122.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-03-08T17:45:22.943Z,1520531122.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:23.037Z,1520531123.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:23.051Z,1520531123.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T17:45:23.065Z,1520531123.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:23.442Z,1520531123.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:23.478Z,1520531123.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T17:45:23.479Z,1520531123.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:23.834Z,1520531123.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:23.849Z,1520531123.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T17:45:23.850Z,1520531123.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:24.241Z,1520531124.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:24.274Z,1520531124.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T17:45:24.275Z,1520531124.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:24.622Z,1520531124.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:24.636Z,1520531124.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T17:45:24.637Z,1520531124.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:25.027Z,1520531125.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:25.042Z,1520531125.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T17:45:25.043Z,1520531125.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:25.431Z,1520531125.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:25.446Z,1520531125.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T17:45:25.447Z,1520531125.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:25.828Z,1520531125.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:25.843Z,1520531125.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T17:45:25.844Z,1520531125.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:26.230Z,1520531126.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:26.245Z,1520531126.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T17:45:26.246Z,1520531126.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:26.633Z,1520531126.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:26.648Z,1520531126.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T17:45:26.649Z,1520531126.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:27.034Z,1520531127.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:27.048Z,1520531127.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T17:45:27.049Z,1520531127.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:27.428Z,1520531127.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:27.443Z,1520531127.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T17:45:27.444Z,1520531127.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:27.826Z,1520531127.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:27.841Z,1520531127.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:28.227Z,1520531128.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:28.242Z,1520531128.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:28.629Z,1520531128.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:28.644Z,1520531128.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:29.028Z,1520531129.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:29.043Z,1520531129.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:29.429Z,1520531129.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:29.445Z,1520531129.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:29.834Z,1520531129.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:29.849Z,1520531129.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:30.233Z,1520531130.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:30.248Z,1520531130.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:30.629Z,1520531130.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:30.644Z,1520531130.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:31.026Z,1520531131.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:31.043Z,1520531131.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:31.422Z,1520531131.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:31.441Z,1520531131.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:31.832Z,1520531131.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:31.847Z,1520531131.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:32.229Z,1520531132.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:32.245Z,1520531132.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:32.633Z,1520531132.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:32.649Z,1520531132.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:33.030Z,1520531133.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:33.045Z,1520531133.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:33.431Z,1520531133.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:33.450Z,1520531133.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:33.828Z,1520531133.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:33.843Z,1520531133.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:34.225Z,1520531134.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:34.240Z,1520531134.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:34.627Z,1520531134.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:34.646Z,1520531134.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:35.031Z,1520531135.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:35.050Z,1520531135.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:35.433Z,1520531135.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:35.448Z,1520531135.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:35.833Z,1520531135.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:35.849Z,1520531135.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:36.228Z,1520531136.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:36.250Z,1520531136.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:36.632Z,1520531136.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:36.647Z,1520531136.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:37.027Z,1520531137.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:37.043Z,1520531137.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:37.427Z,1520531137.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:37.446Z,1520531137.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:37.826Z,1520531137.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:37.842Z,1520531137.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:38.234Z,1520531138.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:38.249Z,1520531138.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:38.641Z,1520531138.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:38.656Z,1520531138.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:39.033Z,1520531139.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:39.047Z,1520531139.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:39.427Z,1520531139.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:39.446Z,1520531139.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:39.831Z,1520531139.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:39.846Z,1520531139.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:40.229Z,1520531140.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:40.245Z,1520531140.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:40.628Z,1520531140.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:40.644Z,1520531140.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:41.023Z,1520531141.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:41.039Z,1520531141.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:41.433Z,1520531141.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:41.460Z,1520531141.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:41.833Z,1520531141.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:41.849Z,1520531141.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:42.233Z,1520531142.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:42.248Z,1520531142.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:42.629Z,1520531142.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:42.645Z,1520531142.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:43.031Z,1520531143.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:43.050Z,1520531143.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:43.428Z,1520531143.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:43.443Z,1520531143.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:43.826Z,1520531143.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:43.841Z,1520531143.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:44.233Z,1520531144.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:44.254Z,1520531144.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:44.636Z,1520531144.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:44.651Z,1520531144.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:45.034Z,1520531145.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:45.049Z,1520531145.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:45.420Z,1520531145.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:45.443Z,1520531145.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:45.828Z,1520531145.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:45.843Z,1520531145.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:46.230Z,1520531146.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:46.245Z,1520531146.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:46.620Z,1520531146.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:46.646Z,1520531146.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:47.031Z,1520531147.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:47.047Z,1520531147.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:47.434Z,1520531147.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:47.450Z,1520531147.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:47.835Z,1520531147.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:47.851Z,1520531147.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:48.233Z,1520531148.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:48.255Z,1520531148.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:48.628Z,1520531148.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:48.643Z,1520531148.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:49.023Z,1520531149.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:49.038Z,1520531149.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:49.430Z,1520531149.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:49.451Z,1520531149.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:49.829Z,1520531149.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:49.844Z,1520531149.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:50.233Z,1520531150.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:50.248Z,1520531150.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:50.632Z,1520531150.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:50.654Z,1520531150.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:51.036Z,1520531151.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:51.051Z,1520531151.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:51.424Z,1520531151.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:51.439Z,1520531151.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:51.830Z,1520531151.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:51.845Z,1520531151.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:52.228Z,1520531152.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:52.243Z,1520531152.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:52.624Z,1520531152.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:52.640Z,1520531152.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:53.027Z,1520531153.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:53.042Z,1520531153.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:53.433Z,1520531153.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:53.448Z,1520531153.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:53.833Z,1520531153.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:53.849Z,1520531153.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:54.235Z,1520531154.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:54.250Z,1520531154.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:54.623Z,1520531154.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:54.638Z,1520531154.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:55.021Z,1520531155.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:55.041Z,1520531155.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:55.417Z,1520531155.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:55.450Z,1520531155.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:55.832Z,1520531155.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:55.847Z,1520531155.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:56.232Z,1520531156.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:56.248Z,1520531156.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:56.633Z,1520531156.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:56.649Z,1520531156.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:57.034Z,1520531157.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:57.054Z,1520531157.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:57.417Z,1520531157.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:57.439Z,1520531157.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:57.826Z,1520531157.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:57.845Z,1520531157.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:58.228Z,1520531158.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:58.243Z,1520531158.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:58.621Z,1520531158.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:58.639Z,1520531158.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:59.026Z,1520531159.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:59.041Z,1520531159.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:59.433Z,1520531159.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:59.449Z,1520531159.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:45:59.834Z,1520531159.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:45:59.854Z,1520531159.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:00.390Z,1520531160.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:00.405Z,1520531160.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:00.632Z,1520531160.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:00.647Z,1520531160.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:01.029Z,1520531161.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:01.044Z,1520531161.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:01.424Z,1520531161.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:01.439Z,1520531161.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:01.827Z,1520531161.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:01.843Z,1520531161.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:02.235Z,1520531162.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:02.254Z,1520531162.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:02.633Z,1520531162.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:02.648Z,1520531162.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:03.032Z,1520531163.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:03.047Z,1520531163.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:03.427Z,1520531163.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:03.442Z,1520531163.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:03.831Z,1520531163.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:03.846Z,1520531163.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:04.229Z,1520531164.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:04.245Z,1520531164.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:04.629Z,1520531164.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:04.644Z,1520531164.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:05.023Z,1520531165.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:05.038Z,1520531165.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:05.434Z,1520531165.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:05.459Z,1520531165.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:05.838Z,1520531165.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:05.853Z,1520531165.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:06.237Z,1520531166.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:06.258Z,1520531166.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:06.609Z,1520531166.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:06.641Z,1520531166.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:07.030Z,1520531167.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:07.045Z,1520531167.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:07.431Z,1520531167.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:07.446Z,1520531167.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:07.813Z,1520531167.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:07.845Z,1520531167.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:08.238Z,1520531168.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:08.253Z,1520531168.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:08.639Z,1520531168.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:08.659Z,1520531168.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:09.041Z,1520531169.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:09.056Z,1520531169.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:09.419Z,1520531169.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:09.446Z,1520531169.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:09.832Z,1520531169.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:09.848Z,1520531169.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:10.230Z,1520531170.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:10.245Z,1520531170.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:10.618Z,1520531170.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:10.650Z,1520531170.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:11.019Z,1520531171.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:11.046Z,1520531171.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:11.438Z,1520531171.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:11.458Z,1520531171.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:11.837Z,1520531171.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:11.853Z,1520531171.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:12.238Z,1520531172.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:12.253Z,1520531172.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:12.614Z,1520531172.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:12.651Z,1520531172.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:13.031Z,1520531173.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:13.050Z,1520531173.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:13.419Z,1520531173.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:13.455Z,1520531173.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:13.830Z,1520531173.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:13.846Z,1520531173.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:14.241Z,1520531174.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:14.262Z,1520531174.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:14.642Z,1520531174.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:14.657Z,1520531174.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:15.034Z,1520531175.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:15.053Z,1520531175.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:15.418Z,1520531175.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:15.444Z,1520531175.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:15.815Z,1520531175.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:15.842Z,1520531175.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:16.215Z,1520531176.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:16.243Z,1520531176.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:16.631Z,1520531176.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:16.646Z,1520531176.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:17.031Z,1520531177.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:17.046Z,1520531177.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:17.434Z,1520531177.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:17.449Z,1520531177.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:17.844Z,1520531177.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:17.866Z,1520531177.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:18.242Z,1520531178.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:18.258Z,1520531178.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:18.630Z,1520531178.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:18.650Z,1520531178.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:19.032Z,1520531179.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:19.047Z,1520531179.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:19.432Z,1520531179.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:19.448Z,1520531179.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:19.813Z,1520531179.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:19.840Z,1520531179.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:22.939Z,1520531182.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:22.955Z,1520531182.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:23.058Z,1520531183.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:23.089Z,1520531183.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:23.436Z,1520531183.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:23.451Z,1520531183.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:23.815Z,1520531183.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:23.847Z,1520531183.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:24.210Z,1520531184.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:24.234Z,1520531184.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:24.610Z,1520531184.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:24.628Z,1520531184.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:25.015Z,1520531185.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:25.030Z,1520531185.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:25.411Z,1520531185.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:25.427Z,1520531185.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:25.823Z,1520531185.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:25.855Z,1520531185.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:26.225Z,1520531186.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:26.258Z,1520531186.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:26.607Z,1520531186.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:26.623Z,1520531186.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:27.012Z,1520531187.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:27.035Z,1520531187.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:27.412Z,1520531187.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:27.428Z,1520531187.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:27.810Z,1520531187.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:27.827Z,1520531187.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:28.217Z,1520531188.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:28.257Z,1520531188.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:28.620Z,1520531188.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:28.635Z,1520531188.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:29.017Z,1520531189.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:29.033Z,1520531189.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:29.415Z,1520531189.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:29.430Z,1520531189.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:29.816Z,1520531189.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:29.830Z,1520531189.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:30.208Z,1520531190.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:30.236Z,1520531190.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:30.615Z,1520531190.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:30.631Z,1520531190.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:31.015Z,1520531191.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:31.030Z,1520531191.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:31.419Z,1520531191.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:31.447Z,1520531191.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:31.821Z,1520531191.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:31.837Z,1520531191.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:32.220Z,1520531192.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:32.235Z,1520531192.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:32.605Z,1520531192.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:32.628Z,1520531192.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:33.013Z,1520531193.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:33.037Z,1520531193.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:33.420Z,1520531193.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:33.435Z,1520531193.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:33.815Z,1520531193.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:33.830Z,1520531193.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:34.224Z,1520531194.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:34.248Z,1520531194.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:34.629Z,1520531194.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:34.644Z,1520531194.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:35.029Z,1520531195.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:35.047Z,1520531195.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:35.407Z,1520531195.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:35.434Z,1520531195.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:35.803Z,1520531195.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:35.834Z,1520531195.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:36.222Z,1520531196.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:36.238Z,1520531196.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:36.607Z,1520531196.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:36.638Z,1520531196.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:37.003Z,1520531197.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:37.034Z,1520531197.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:37.419Z,1520531197.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:37.455Z,1520531197.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:37.829Z,1520531197.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:37.845Z,1520531197.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:38.213Z,1520531198.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:38.246Z,1520531198.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:38.602Z,1520531198.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:38.625Z,1520531198.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:39.003Z,1520531199.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:39.047Z,1520531199.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:39.409Z,1520531199.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:39.439Z,1520531199.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:39.810Z,1520531199.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:39.843Z,1520531199.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:40.230Z,1520531200.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:40.245Z,1520531200.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:40.619Z,1520531200.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:40.646Z,1520531200.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:41.018Z,1520531201.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:41.045Z,1520531201.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:41.406Z,1520531201.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:41.442Z,1520531201.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:41.807Z,1520531201.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:41.846Z,1520531201.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:42.203Z,1520531202.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:42.232Z,1520531202.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:42.610Z,1520531202.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:42.646Z,1520531202.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:43.009Z,1520531203.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:43.024Z,1520531203.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:43.417Z,1520531203.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:43.444Z,1520531203.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:43.834Z,1520531203.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:43.850Z,1520531203.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:44.234Z,1520531204.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:44.250Z,1520531204.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:44.602Z,1520531204.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:44.623Z,1520531204.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:45.007Z,1520531205.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:45.022Z,1520531205.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:45.411Z,1520531205.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:45.428Z,1520531205.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:45.809Z,1520531205.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:45.824Z,1520531205.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:46.225Z,1520531206.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:46.255Z,1520531206.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:46.621Z,1520531206.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:46.647Z,1520531206.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:47.025Z,1520531207.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:47.055Z,1520531207.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:47.410Z,1520531207.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:47.452Z,1520531207.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:47.813Z,1520531207.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:47.828Z,1520531207.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:48.217Z,1520531208.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:48.232Z,1520531208.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:48.615Z,1520531208.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:48.634Z,1520531208.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:49.015Z,1520531209.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:49.030Z,1520531209.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:49.414Z,1520531209.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:49.431Z,1520531209.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:49.825Z,1520531209.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:49.840Z,1520531209.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:50.219Z,1520531210.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:50.234Z,1520531210.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:50.606Z,1520531210.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:50.630Z,1520531210.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:51.017Z,1520531211.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:51.033Z,1520531211.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:51.415Z,1520531211.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:51.430Z,1520531211.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:51.816Z,1520531211.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:51.832Z,1520531211.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:52.219Z,1520531212.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:52.247Z,1520531212.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:52.621Z,1520531212.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:52.636Z,1520531212.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:53.020Z,1520531213.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:53.035Z,1520531213.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:53.417Z,1520531213.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:53.432Z,1520531213.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:53.816Z,1520531213.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:53.831Z,1520531213.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:54.209Z,1520531214.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:54.228Z,1520531214.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:54.616Z,1520531214.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:54.631Z,1520531214.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:55.019Z,1520531215.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:55.033Z,1520531215.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:55.419Z,1520531215.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:55.446Z,1520531215.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:55.830Z,1520531215.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:55.851Z,1520531215.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:56.225Z,1520531216.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:56.251Z,1520531216.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:56.597Z,1520531216.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:56.646Z,1520531216.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:57.009Z,1520531217.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:57.035Z,1520531217.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:57.407Z,1520531217.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:57.438Z,1520531217.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:57.807Z,1520531217.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:57.838Z,1520531217.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:58.216Z,1520531218.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:58.247Z,1520531218.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:58.627Z,1520531218.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:58.643Z,1520531218.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:59.029Z,1520531219.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:59.045Z,1520531219.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:59.410Z,1520531219.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:59.437Z,1520531219.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:46:59.803Z,1520531219.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:46:59.835Z,1520531219.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:00.199Z,1520531220.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:00.246Z,1520531220.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:00.610Z,1520531220.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:00.637Z,1520531220.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:01.003Z,1520531221.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:01.030Z,1520531221.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:01.416Z,1520531221.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:01.455Z,1520531221.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:01.818Z,1520531221.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:01.845Z,1520531221.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:02.231Z,1520531222.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:02.246Z,1520531222.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:02.605Z,1520531222.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:02.620Z,1520531222.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:03.014Z,1520531223.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:03.046Z,1520531223.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:03.415Z,1520531223.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:03.452Z,1520531223.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:03.810Z,1520531223.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:03.825Z,1520531223.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:04.226Z,1520531224.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:04.249Z,1520531224.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:04.630Z,1520531224.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:04.656Z,1520531224.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:05.020Z,1520531225.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:05.051Z,1520531225.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:05.416Z,1520531225.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:05.431Z,1520531225.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:05.811Z,1520531225.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:05.827Z,1520531225.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:06.208Z,1520531226.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:06.234Z,1520531226.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:06.613Z,1520531226.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:06.629Z,1520531226.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:07.016Z,1520531227.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:07.031Z,1520531227.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:07.421Z,1520531227.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:07.455Z,1520531227.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:07.824Z,1520531227.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:07.854Z,1520531227.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:08.222Z,1520531228.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:08.246Z,1520531228.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:08.601Z,1520531228.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:08.620Z,1520531228.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:09.014Z,1520531229.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:09.034Z,1520531229.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:09.418Z,1520531229.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:09.433Z,1520531229.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:09.819Z,1520531229.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:09.835Z,1520531229.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:10.221Z,1520531230.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:10.237Z,1520531230.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:10.621Z,1520531230.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:10.635Z,1520531230.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:11.021Z,1520531231.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:11.036Z,1520531231.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:11.414Z,1520531231.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:11.439Z,1520531231.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:11.818Z,1520531231.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:11.833Z,1520531231.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:12.209Z,1520531232.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:12.225Z,1520531232.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:12.608Z,1520531232.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:12.634Z,1520531232.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:13.015Z,1520531233.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:13.043Z,1520531233.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:13.412Z,1520531233.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:13.444Z,1520531233.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:13.820Z,1520531233.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:13.835Z,1520531233.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:14.224Z,1520531234.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:14.239Z,1520531234.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:14.606Z,1520531234.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:14.633Z,1520531234.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:15.017Z,1520531235.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:15.032Z,1520531235.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:15.413Z,1520531235.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:15.427Z,1520531235.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:15.823Z,1520531235.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:15.838Z,1520531235.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:16.226Z,1520531236.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:16.243Z,1520531236.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:16.624Z,1520531236.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:16.639Z,1520531236.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:17.025Z,1520531237.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:17.047Z,1520531237.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:17.416Z,1520531237.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:17.431Z,1520531237.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:17.816Z,1520531237.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:17.831Z,1520531237.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:18.211Z,1520531238.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:18.227Z,1520531238.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:18.620Z,1520531238.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:18.635Z,1520531238.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:19.016Z,1520531239.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:19.031Z,1520531239.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:19.418Z,1520531239.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:19.438Z,1520531239.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:19.823Z,1520531239.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:19.844Z,1520531239.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:20.236Z,1520531240.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:20.251Z,1520531240.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:23.304Z,1520531243.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:23.329Z,1520531243.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:23.434Z,1520531243.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:23.449Z,1520531243.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:23.806Z,1520531243.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:23.833Z,1520531243.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:24.193Z,1520531244.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:24.230Z,1520531244.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:24.607Z,1520531244.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:24.647Z,1520531244.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:24.991Z,1520531244.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:25.010Z,1520531245.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:25.387Z,1520531245.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:25.425Z,1520531245.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:25.786Z,1520531245.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:25.807Z,1520531245.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:26.191Z,1520531246.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:26.208Z,1520531246.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:26.592Z,1520531246.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:26.607Z,1520531246.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:27.001Z,1520531247.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:27.031Z,1520531247.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:27.386Z,1520531247.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:27.424Z,1520531247.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:27.784Z,1520531247.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:27.805Z,1520531247.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:28.188Z,1520531248.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:28.219Z,1520531248.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:28.585Z,1520531248.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:28.625Z,1520531248.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:28.991Z,1520531248.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:29.011Z,1520531249.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:29.396Z,1520531249.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:29.412Z,1520531249.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:29.798Z,1520531249.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:29.814Z,1520531249.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:30.193Z,1520531250.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:30.234Z,1520531250.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:30.590Z,1520531250.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:30.610Z,1520531250.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:30.993Z,1520531250.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:31.009Z,1520531251.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:31.393Z,1520531251.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:31.408Z,1520531251.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:31.791Z,1520531251.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:31.827Z,1520531251.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:32.195Z,1520531252.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:32.215Z,1520531252.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:32.599Z,1520531252.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:32.615Z,1520531252.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:32.998Z,1520531252.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:33.013Z,1520531253.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:33.387Z,1520531253.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:33.420Z,1520531253.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:33.791Z,1520531253.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:33.811Z,1520531253.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:34.189Z,1520531254.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:34.208Z,1520531254.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:34.595Z,1520531254.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:34.611Z,1520531254.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:34.991Z,1520531254.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:35.035Z,1520531255.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:35.393Z,1520531255.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:35.413Z,1520531255.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:35.800Z,1520531255.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:35.815Z,1520531255.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:36.198Z,1520531256.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:36.213Z,1520531256.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:36.591Z,1520531256.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:36.633Z,1520531256.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:36.986Z,1520531256.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:37.016Z,1520531257.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:37.396Z,1520531257.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:37.412Z,1520531257.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:37.795Z,1520531257.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:37.822Z,1520531257.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:38.202Z,1520531258.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:38.247Z,1520531258.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:38.603Z,1520531258.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:38.646Z,1520531258.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:39.006Z,1520531259.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:39.031Z,1520531259.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:39.395Z,1520531259.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:39.410Z,1520531259.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:39.793Z,1520531259.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:39.826Z,1520531259.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:40.199Z,1520531260.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:40.217Z,1520531260.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:40.589Z,1520531260.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:40.613Z,1520531260.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:40.994Z,1520531260.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:41.010Z,1520531261.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:41.400Z,1520531261.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:41.440Z,1520531261.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:41.809Z,1520531261.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:41.847Z,1520531261.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:42.207Z,1520531262.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:42.230Z,1520531262.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:42.597Z,1520531262.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:42.613Z,1520531262.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:42.978Z,1520531262.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:43.022Z,1520531263.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:43.379Z,1520531263.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:43.410Z,1520531263.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:43.779Z,1520531263.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:43.822Z,1520531263.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:44.205Z,1520531264.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:44.221Z,1520531264.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:44.607Z,1520531264.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:44.627Z,1520531264.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:45.003Z,1520531265.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:45.027Z,1520531265.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:45.382Z,1520531265.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:45.414Z,1520531265.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:45.781Z,1520531265.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:45.815Z,1520531265.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:46.183Z,1520531266.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:46.216Z,1520531266.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:46.580Z,1520531266.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:46.619Z,1520531266.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:46.979Z,1520531266.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:47.015Z,1520531267.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:47.395Z,1520531267.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:47.421Z,1520531267.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:47.793Z,1520531267.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:47.826Z,1520531267.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:48.193Z,1520531268.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:48.225Z,1520531268.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:48.588Z,1520531268.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:48.623Z,1520531268.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:48.981Z,1520531268.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:48.998Z,1520531268.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:49.383Z,1520531269.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:49.434Z,1520531269.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:49.784Z,1520531269.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:49.804Z,1520531269.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:50.200Z,1520531270.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:50.228Z,1520531270.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:50.601Z,1520531270.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:50.628Z,1520531270.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:50.997Z,1520531270.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:51.034Z,1520531271.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:51.384Z,1520531271.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:51.404Z,1520531271.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:51.790Z,1520531271.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:51.807Z,1520531271.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:52.190Z,1520531272.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:52.210Z,1520531272.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:52.589Z,1520531272.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:52.635Z,1520531272.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:52.988Z,1520531272.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:53.009Z,1520531273.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:53.404Z,1520531273.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:53.435Z,1520531273.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:53.796Z,1520531273.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:53.811Z,1520531273.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:54.201Z,1520531274.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:54.238Z,1520531274.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:54.586Z,1520531274.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:54.626Z,1520531274.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:54.989Z,1520531274.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:55.007Z,1520531275.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:55.388Z,1520531275.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:55.404Z,1520531275.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:55.786Z,1520531275.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:55.829Z,1520531275.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:56.193Z,1520531276.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:56.213Z,1520531276.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:56.604Z,1520531276.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:56.635Z,1520531276.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:56.996Z,1520531276.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:57.011Z,1520531277.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:57.390Z,1520531277.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:57.419Z,1520531277.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:57.791Z,1520531277.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:57.811Z,1520531277.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:58.193Z,1520531278.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:58.210Z,1520531278.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:58.591Z,1520531278.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:58.614Z,1520531278.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:58.991Z,1520531278.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:59.035Z,1520531279.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:59.393Z,1520531279.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:59.413Z,1520531279.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:47:59.800Z,1520531279.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:47:59.814Z,1520531279.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:00.198Z,1520531280.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:00.213Z,1520531280.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:00.589Z,1520531280.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:00.634Z,1520531280.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:00.990Z,1520531280.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:01.010Z,1520531281.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:01.395Z,1520531281.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:01.411Z,1520531281.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:01.795Z,1520531281.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:01.814Z,1520531281.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:02.195Z,1520531282.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:02.246Z,1520531282.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:02.599Z,1520531282.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:02.617Z,1520531282.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:02.996Z,1520531282.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:03.012Z,1520531283.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:03.393Z,1520531283.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:03.408Z,1520531283.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:03.791Z,1520531283.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:03.832Z,1520531283.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:04.191Z,1520531284.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:04.211Z,1520531284.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:04.593Z,1520531284.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:04.609Z,1520531284.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:04.995Z,1520531284.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:05.010Z,1520531285.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:05.393Z,1520531285.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:05.433Z,1520531285.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:05.797Z,1520531285.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:05.816Z,1520531285.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:06.203Z,1520531286.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:06.219Z,1520531286.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:06.589Z,1520531286.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:06.613Z,1520531286.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:06.991Z,1520531286.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:07.019Z,1520531287.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:07.392Z,1520531287.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:07.412Z,1520531287.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:07.779Z,1520531287.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:07.819Z,1520531287.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:08.205Z,1520531288.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:08.220Z,1520531288.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:08.599Z,1520531288.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:08.646Z,1520531288.646 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:08.646Z,1520531288.646 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 201
2018-03-08T17:48:08.646Z,1520531288.646 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T17:48:08.648Z,1520531288.648 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:08.648Z,1520531288.648 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 201
2018-03-08T17:48:08.648Z,1520531288.648 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T17:48:08.650Z,1520531288.650 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:08.650Z,1520531288.650 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 201
2018-03-08T17:48:08.650Z,1520531288.650 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T17:48:08.662Z,1520531288.662 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T17:48:08.662Z,1520531288.662 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T17:48:08.662Z,1520531288.662 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T17:48:08.993Z,1520531288.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:09.058Z,1520531289.058 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T17:48:09.058Z,1520531289.058 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 201
2018-03-08T17:48:09.058Z,1520531289.058 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T17:48:09.058Z,1520531289.058 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 201
2018-03-08T17:48:09.059Z,1520531289.059 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T17:48:09.059Z,1520531289.059 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 201
2018-03-08T17:48:09.378Z,1520531289.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:09.417Z,1520531289.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T17:48:09.418Z,1520531289.418 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:48:09.418Z,1520531289.418 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:48:09.418Z,1520531289.418 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T17:48:09.419Z,1520531289.419 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:48:09.419Z,1520531289.419 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:48:09.419Z,1520531289.419 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T17:48:09.420Z,1520531289.420 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:48:09.420Z,1520531289.420 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:48:09.786Z,1520531289.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:09.830Z,1520531289.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T17:48:09.831Z,1520531289.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:10.180Z,1520531290.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:10.218Z,1520531290.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T17:48:10.218Z,1520531290.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:10.580Z,1520531290.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:10.618Z,1520531290.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T17:48:10.619Z,1520531290.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:10.979Z,1520531290.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:11.012Z,1520531291.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T17:48:11.013Z,1520531291.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:11.399Z,1520531291.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:11.426Z,1520531291.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T17:48:11.427Z,1520531291.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:11.816Z,1520531291.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:11.830Z,1520531291.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T17:48:11.831Z,1520531291.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:12.202Z,1520531292.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:12.226Z,1520531292.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T17:48:12.227Z,1520531292.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:12.583Z,1520531292.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:12.683Z,1520531292.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T17:48:12.688Z,1520531292.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:12.986Z,1520531292.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:13.013Z,1520531293.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T17:48:13.014Z,1520531293.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:13.384Z,1520531293.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:13.420Z,1520531293.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T17:48:13.421Z,1520531293.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:13.779Z,1520531293.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:13.819Z,1520531293.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T17:48:13.820Z,1520531293.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:14.191Z,1520531294.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:14.226Z,1520531294.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T17:48:14.227Z,1520531294.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:14.604Z,1520531294.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:14.620Z,1520531294.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T17:48:14.621Z,1520531294.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:15.001Z,1520531295.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:15.038Z,1520531295.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T17:48:15.039Z,1520531295.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:15.379Z,1520531295.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:15.482Z,1520531295.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T17:48:15.483Z,1520531295.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:15.780Z,1520531295.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:15.816Z,1520531295.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T17:48:15.821Z,1520531295.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:16.186Z,1520531296.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:16.217Z,1520531296.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T17:48:16.218Z,1520531296.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:16.586Z,1520531296.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:16.623Z,1520531296.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T17:48:16.624Z,1520531296.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:16.987Z,1520531296.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:17.022Z,1520531297.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T17:48:17.023Z,1520531297.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:17.401Z,1520531297.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:17.424Z,1520531297.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T17:48:17.425Z,1520531297.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:17.801Z,1520531297.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:17.823Z,1520531297.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T17:48:17.824Z,1520531297.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:18.190Z,1520531298.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:18.229Z,1520531298.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T17:48:18.230Z,1520531298.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:18.587Z,1520531298.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:18.607Z,1520531298.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T17:48:18.608Z,1520531298.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:18.992Z,1520531298.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:19.008Z,1520531299.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T17:48:19.009Z,1520531299.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:19.389Z,1520531299.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:19.410Z,1520531299.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T17:48:19.411Z,1520531299.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:19.790Z,1520531299.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:19.830Z,1520531299.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T17:48:19.831Z,1520531299.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:20.190Z,1520531300.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:20.210Z,1520531300.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T17:48:20.211Z,1520531300.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:20.593Z,1520531300.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:20.609Z,1520531300.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T17:48:20.610Z,1520531300.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:21.002Z,1520531301.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:21.035Z,1520531301.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T17:48:21.036Z,1520531301.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:24.085Z,1520531304.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:24.100Z,1520531304.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-03-08T17:48:24.101Z,1520531304.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:24.197Z,1520531304.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:24.214Z,1520531304.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T17:48:24.215Z,1520531304.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:24.535Z,1520531304.535 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T17:48:24.535Z,1520531304.535 [NAL9602] Data Fault, FailCount= 1
2018-03-08T17:48:24.535Z,1520531304.535 [NAL9602](ERROR): Data Fault
2018-03-08T17:48:24.552Z,1520531304.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:24.598Z,1520531304.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T17:48:24.599Z,1520531304.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:24.618Z,1520531304.618 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T17:48:24.935Z,1520531304.935 [NAL9602](INFO): Powering down
2018-03-08T17:48:24.952Z,1520531304.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:24.967Z,1520531304.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2018-03-08T17:48:24.968Z,1520531304.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:25.347Z,1520531305.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:25.362Z,1520531305.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2018-03-08T17:48:25.363Z,1520531305.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:25.753Z,1520531305.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:25.768Z,1520531305.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2018-03-08T17:48:25.769Z,1520531305.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:25.807Z,1520531305.807 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T17:48:25.807Z,1520531305.807 [NAL9602] No Fault, FailCount= 1
2018-03-08T17:48:26.151Z,1520531306.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:26.170Z,1520531306.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2018-03-08T17:48:26.171Z,1520531306.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:26.552Z,1520531306.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:26.567Z,1520531306.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2018-03-08T17:48:26.568Z,1520531306.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:26.956Z,1520531306.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:26.971Z,1520531306.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-03-08T17:48:26.972Z,1520531306.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:27.356Z,1520531307.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:27.370Z,1520531307.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-03-08T17:48:27.371Z,1520531307.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:27.749Z,1520531307.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:27.765Z,1520531307.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-03-08T17:48:27.766Z,1520531307.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:28.156Z,1520531308.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:28.171Z,1520531308.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-03-08T17:48:28.172Z,1520531308.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:28.557Z,1520531308.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:28.571Z,1520531308.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-03-08T17:48:28.572Z,1520531308.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:28.956Z,1520531308.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:28.972Z,1520531308.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:29.356Z,1520531309.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:29.372Z,1520531309.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:29.749Z,1520531309.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:29.777Z,1520531309.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:30.153Z,1520531310.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:30.168Z,1520531310.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:30.557Z,1520531310.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:30.582Z,1520531310.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:30.958Z,1520531310.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:30.973Z,1520531310.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:31.351Z,1520531311.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:31.371Z,1520531311.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:31.761Z,1520531311.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:31.776Z,1520531311.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:32.149Z,1520531312.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:32.165Z,1520531312.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:32.541Z,1520531312.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:32.571Z,1520531312.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:32.953Z,1520531312.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:32.973Z,1520531312.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:33.341Z,1520531313.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:33.377Z,1520531313.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:33.741Z,1520531313.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:33.778Z,1520531313.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:34.159Z,1520531314.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:34.179Z,1520531314.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:34.541Z,1520531314.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:34.577Z,1520531314.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:34.941Z,1520531314.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:34.978Z,1520531314.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:35.360Z,1520531315.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:35.376Z,1520531315.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:35.741Z,1520531315.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:35.769Z,1520531315.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:36.155Z,1520531316.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:36.170Z,1520531316.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:36.549Z,1520531316.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:36.583Z,1520531316.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:36.959Z,1520531316.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:36.974Z,1520531316.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:37.341Z,1520531317.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:37.377Z,1520531317.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:37.751Z,1520531317.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:37.773Z,1520531317.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:38.155Z,1520531318.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:38.170Z,1520531318.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:38.544Z,1520531318.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:38.572Z,1520531318.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:38.953Z,1520531318.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:38.980Z,1520531318.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:39.342Z,1520531319.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:39.374Z,1520531319.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:39.744Z,1520531319.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:39.776Z,1520531319.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:40.161Z,1520531320.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:40.178Z,1520531320.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:40.559Z,1520531320.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:40.574Z,1520531320.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:40.959Z,1520531320.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:40.975Z,1520531320.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:41.347Z,1520531321.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:41.374Z,1520531321.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:41.751Z,1520531321.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:41.778Z,1520531321.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:42.145Z,1520531322.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:42.172Z,1520531322.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:42.547Z,1520531322.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:42.570Z,1520531322.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:42.951Z,1520531322.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:42.977Z,1520531322.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:43.344Z,1520531323.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:43.372Z,1520531323.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:43.751Z,1520531323.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:43.786Z,1520531323.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:44.142Z,1520531324.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:44.183Z,1520531324.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:44.541Z,1520531324.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:44.556Z,1520531324.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:44.947Z,1520531324.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:44.962Z,1520531324.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:45.351Z,1520531325.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:45.365Z,1520531325.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:45.742Z,1520531325.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:45.757Z,1520531325.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:46.152Z,1520531326.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:46.193Z,1520531326.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:46.550Z,1520531326.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:46.565Z,1520531326.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:46.951Z,1520531326.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:46.966Z,1520531326.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:47.356Z,1520531327.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:47.371Z,1520531327.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:47.752Z,1520531327.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:47.767Z,1520531327.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:48.150Z,1520531328.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:48.166Z,1520531328.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:48.554Z,1520531328.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:48.574Z,1520531328.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:48.957Z,1520531328.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:48.972Z,1520531328.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:49.353Z,1520531329.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:49.368Z,1520531329.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:49.751Z,1520531329.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:49.774Z,1520531329.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:50.148Z,1520531330.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:50.173Z,1520531330.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:50.553Z,1520531330.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:50.568Z,1520531330.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:50.965Z,1520531330.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:50.980Z,1520531330.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:51.359Z,1520531331.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:51.374Z,1520531331.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:51.758Z,1520531331.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:51.774Z,1520531331.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:52.153Z,1520531332.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:52.181Z,1520531332.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:52.559Z,1520531332.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:52.574Z,1520531332.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:52.959Z,1520531332.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:52.976Z,1520531332.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:53.347Z,1520531333.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:53.370Z,1520531333.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:53.747Z,1520531333.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:53.775Z,1520531333.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:54.145Z,1520531334.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:54.172Z,1520531334.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:54.551Z,1520531334.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:54.582Z,1520531334.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:54.947Z,1520531334.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:54.980Z,1520531334.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:55.328Z,1520531335.328 [NAL9602](INFO): Powering up NAL9602
2018-03-08T17:48:55.347Z,1520531335.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:55.383Z,1520531335.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:55.749Z,1520531335.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:55.785Z,1520531335.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:56.152Z,1520531336.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:56.191Z,1520531336.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:56.544Z,1520531336.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:56.560Z,1520531336.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:56.950Z,1520531336.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:56.966Z,1520531336.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:57.348Z,1520531337.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:57.363Z,1520531337.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:57.747Z,1520531337.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:57.764Z,1520531337.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:58.151Z,1520531338.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:58.175Z,1520531338.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:58.556Z,1520531338.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:58.572Z,1520531338.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:58.954Z,1520531338.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:58.970Z,1520531338.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:59.353Z,1520531339.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:59.369Z,1520531339.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:48:59.756Z,1520531339.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:48:59.771Z,1520531339.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:00.153Z,1520531340.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:00.168Z,1520531340.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:00.551Z,1520531340.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:00.579Z,1520531340.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:00.956Z,1520531340.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:00.971Z,1520531340.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:01.353Z,1520531341.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:01.368Z,1520531341.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:01.753Z,1520531341.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:01.774Z,1520531341.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:02.158Z,1520531342.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:02.173Z,1520531342.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:02.553Z,1520531342.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:02.569Z,1520531342.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:02.955Z,1520531342.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:02.970Z,1520531342.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:03.358Z,1520531343.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:03.373Z,1520531343.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:03.753Z,1520531343.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:03.768Z,1520531343.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:04.155Z,1520531344.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:04.170Z,1520531344.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:04.555Z,1520531344.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:04.570Z,1520531344.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:04.955Z,1520531344.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:04.970Z,1520531344.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:05.357Z,1520531345.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:05.371Z,1520531345.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:05.760Z,1520531345.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:05.775Z,1520531345.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:06.135Z,1520531346.135 [NAL9602](INFO): NAL9602 initialized
2018-03-08T17:49:06.164Z,1520531346.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:06.194Z,1520531346.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:06.553Z,1520531346.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:06.573Z,1520531346.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:06.961Z,1520531346.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:06.976Z,1520531346.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:07.358Z,1520531347.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:07.379Z,1520531347.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:07.764Z,1520531347.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:07.779Z,1520531347.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:08.157Z,1520531348.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:08.172Z,1520531348.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:08.561Z,1520531348.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:08.576Z,1520531348.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:08.960Z,1520531348.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:08.975Z,1520531348.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:09.366Z,1520531349.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:09.386Z,1520531349.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:09.765Z,1520531349.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:09.781Z,1520531349.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:10.165Z,1520531350.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:10.181Z,1520531350.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:10.561Z,1520531350.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:10.576Z,1520531350.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:10.960Z,1520531350.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:10.975Z,1520531350.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:11.355Z,1520531351.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:11.375Z,1520531351.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:11.756Z,1520531351.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:11.771Z,1520531351.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:12.165Z,1520531352.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:12.186Z,1520531352.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:12.568Z,1520531352.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:12.583Z,1520531352.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:12.969Z,1520531352.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:12.984Z,1520531352.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:13.361Z,1520531353.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:13.376Z,1520531353.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:13.760Z,1520531353.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:13.775Z,1520531353.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:14.167Z,1520531354.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:14.183Z,1520531354.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:14.557Z,1520531354.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:14.585Z,1520531354.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:14.973Z,1520531354.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:14.992Z,1520531354.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:15.352Z,1520531355.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:15.382Z,1520531355.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:15.745Z,1520531355.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:15.779Z,1520531355.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:16.166Z,1520531356.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:16.187Z,1520531356.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:16.574Z,1520531356.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:16.593Z,1520531356.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:16.966Z,1520531356.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:16.987Z,1520531356.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:17.352Z,1520531357.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:17.378Z,1520531357.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:17.747Z,1520531357.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:17.782Z,1520531357.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:18.166Z,1520531358.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:18.182Z,1520531358.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:18.573Z,1520531358.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:18.593Z,1520531358.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:18.970Z,1520531358.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:18.985Z,1520531358.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:19.352Z,1520531359.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:19.378Z,1520531359.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:19.747Z,1520531359.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:19.773Z,1520531359.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:19.776Z,1520531359.776 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T17:49:19.777Z,1520531359.777 [Default:CheckIn:C.Wait] Stopped
2018-03-08T17:49:19.777Z,1520531359.777 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T17:49:19.777Z,1520531359.777 [Default:CheckIn:D] Running Loop=1
2018-03-08T17:49:20.170Z,1520531360.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:20.191Z,1520531360.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:20.194Z,1520531360.194 [Default:CheckIn:D] Stopped
2018-03-08T17:49:20.194Z,1520531360.194 [Default:CheckIn:E] Running Loop=1
2018-03-08T17:49:20.561Z,1520531360.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:20.577Z,1520531360.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:20.580Z,1520531360.580 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 603.589779 min 
2018-03-08T17:49:20.581Z,1520531360.581 [Default:CheckIn:E] Stopped
2018-03-08T17:49:20.581Z,1520531360.581 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T17:49:20.581Z,1520531360.581 [Default:CheckIn] Stopped
2018-03-08T17:49:20.581Z,1520531360.581 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T17:49:20.581Z,1520531360.581 [Default:CheckIn](INFO): Running loop #59
2018-03-08T17:49:20.581Z,1520531360.581 [Default:CheckIn] Running Loop=59
2018-03-08T17:49:20.581Z,1520531360.581 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T17:49:20.581Z,1520531360.581 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T17:49:20.962Z,1520531360.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:20.985Z,1520531360.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:24.051Z,1520531364.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:24.076Z,1520531364.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:24.174Z,1520531364.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:24.217Z,1520531364.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:24.546Z,1520531364.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:24.569Z,1520531364.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:24.942Z,1520531364.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:24.973Z,1520531364.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:25.346Z,1520531365.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:25.376Z,1520531365.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:25.730Z,1520531365.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:25.751Z,1520531365.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:26.132Z,1520531366.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:26.148Z,1520531366.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:26.530Z,1520531366.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:26.559Z,1520531366.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:26.935Z,1520531366.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:26.958Z,1520531366.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:27.342Z,1520531367.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:27.358Z,1520531367.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:27.740Z,1520531367.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:27.756Z,1520531367.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:28.141Z,1520531368.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:28.156Z,1520531368.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:28.530Z,1520531368.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:28.566Z,1520531368.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:28.935Z,1520531368.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:28.951Z,1520531368.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:29.327Z,1520531369.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:29.359Z,1520531369.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:29.738Z,1520531369.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:29.753Z,1520531369.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:30.138Z,1520531370.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:30.162Z,1520531370.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:30.552Z,1520531370.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:30.574Z,1520531370.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:30.948Z,1520531370.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:30.970Z,1520531370.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:31.326Z,1520531371.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:31.362Z,1520531371.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:31.723Z,1520531371.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:31.751Z,1520531371.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:32.152Z,1520531372.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:32.168Z,1520531372.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:32.545Z,1520531372.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:32.566Z,1520531372.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:32.958Z,1520531372.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:32.982Z,1520531372.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:33.330Z,1520531373.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:33.360Z,1520531373.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:33.719Z,1520531373.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:33.736Z,1520531373.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:34.153Z,1520531374.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:34.174Z,1520531374.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:34.539Z,1520531374.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:34.574Z,1520531374.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:34.943Z,1520531374.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:34.969Z,1520531374.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:35.329Z,1520531375.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:35.355Z,1520531375.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:35.727Z,1520531375.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:35.743Z,1520531375.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:36.147Z,1520531376.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:36.182Z,1520531376.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:36.547Z,1520531376.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:36.573Z,1520531376.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:36.937Z,1520531376.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:36.961Z,1520531376.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:37.324Z,1520531377.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:37.348Z,1520531377.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:37.732Z,1520531377.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:37.748Z,1520531377.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:38.134Z,1520531378.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:38.154Z,1520531378.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:38.542Z,1520531378.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:38.557Z,1520531378.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:38.941Z,1520531378.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:38.956Z,1520531378.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:39.332Z,1520531379.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:39.348Z,1520531379.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:39.727Z,1520531379.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:39.750Z,1520531379.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:40.142Z,1520531380.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:40.157Z,1520531380.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:40.545Z,1520531380.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:40.560Z,1520531380.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:40.942Z,1520531380.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:40.957Z,1520531380.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:41.327Z,1520531381.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:41.359Z,1520531381.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:41.726Z,1520531381.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:41.756Z,1520531381.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:42.146Z,1520531382.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:42.170Z,1520531382.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:42.550Z,1520531382.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:42.565Z,1520531382.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:42.943Z,1520531382.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:42.958Z,1520531382.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:43.320Z,1520531383.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:43.356Z,1520531383.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:43.723Z,1520531383.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:43.750Z,1520531383.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:44.151Z,1520531384.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:44.167Z,1520531384.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:44.550Z,1520531384.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:44.565Z,1520531384.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:44.943Z,1520531384.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:44.958Z,1520531384.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:45.323Z,1520531385.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:45.352Z,1520531385.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:45.727Z,1520531385.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:45.754Z,1520531385.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:46.138Z,1520531386.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:46.160Z,1520531386.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:46.541Z,1520531386.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:46.558Z,1520531386.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:46.947Z,1520531386.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:46.963Z,1520531386.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:47.323Z,1520531387.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:47.358Z,1520531387.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:47.726Z,1520531387.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:47.756Z,1520531387.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:48.146Z,1520531388.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:48.166Z,1520531388.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:48.550Z,1520531388.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:48.565Z,1520531388.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:48.946Z,1520531388.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:48.962Z,1520531388.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:49.327Z,1520531389.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:49.355Z,1520531389.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:49.724Z,1520531389.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:49.751Z,1520531389.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:50.142Z,1520531390.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:50.157Z,1520531390.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:50.550Z,1520531390.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:50.565Z,1520531390.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:50.946Z,1520531390.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:50.961Z,1520531390.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:51.319Z,1520531391.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:51.357Z,1520531391.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:51.727Z,1520531391.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:51.756Z,1520531391.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:52.138Z,1520531392.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:52.160Z,1520531392.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:52.547Z,1520531392.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:52.561Z,1520531392.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:52.946Z,1520531392.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:52.967Z,1520531392.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:53.323Z,1520531393.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:53.351Z,1520531393.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:53.723Z,1520531393.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:53.752Z,1520531393.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:54.147Z,1520531394.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:54.162Z,1520531394.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:54.547Z,1520531394.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:54.562Z,1520531394.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:54.937Z,1520531394.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:54.969Z,1520531394.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:55.328Z,1520531395.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:55.362Z,1520531395.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:55.723Z,1520531395.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:55.750Z,1520531395.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:56.146Z,1520531396.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:56.162Z,1520531396.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:56.550Z,1520531396.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:56.566Z,1520531396.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:56.942Z,1520531396.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:56.957Z,1520531396.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:57.319Z,1520531397.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:57.356Z,1520531397.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:57.723Z,1520531397.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:57.750Z,1520531397.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:58.138Z,1520531398.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:58.169Z,1520531398.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:58.552Z,1520531398.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:58.567Z,1520531398.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:58.946Z,1520531398.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:58.966Z,1520531398.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:59.326Z,1520531399.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:59.358Z,1520531399.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:49:59.719Z,1520531399.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:49:59.757Z,1520531399.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:00.146Z,1520531400.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:00.166Z,1520531400.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:00.546Z,1520531400.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:00.567Z,1520531400.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:00.942Z,1520531400.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:00.957Z,1520531400.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:01.339Z,1520531401.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:01.355Z,1520531401.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:01.723Z,1520531401.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:01.750Z,1520531401.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:02.143Z,1520531402.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:02.158Z,1520531402.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:02.546Z,1520531402.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:02.561Z,1520531402.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:02.946Z,1520531402.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:02.962Z,1520531402.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:03.323Z,1520531403.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:03.353Z,1520531403.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:03.727Z,1520531403.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:03.754Z,1520531403.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:04.138Z,1520531404.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:04.161Z,1520531404.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:04.542Z,1520531404.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:04.558Z,1520531404.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:04.946Z,1520531404.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:04.962Z,1520531404.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:05.326Z,1520531405.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:05.355Z,1520531405.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:05.719Z,1520531405.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:05.759Z,1520531405.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:06.146Z,1520531406.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:06.166Z,1520531406.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:06.550Z,1520531406.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:06.565Z,1520531406.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:06.942Z,1520531406.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:06.957Z,1520531406.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:07.327Z,1520531407.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:07.355Z,1520531407.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:07.723Z,1520531407.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:07.750Z,1520531407.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:08.144Z,1520531408.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:08.166Z,1520531408.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:08.550Z,1520531408.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:08.565Z,1520531408.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:08.942Z,1520531408.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:08.957Z,1520531408.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:09.319Z,1520531409.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:09.356Z,1520531409.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:09.727Z,1520531409.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:09.755Z,1520531409.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:10.144Z,1520531410.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:10.159Z,1520531410.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:10.547Z,1520531410.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:10.571Z,1520531410.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:10.948Z,1520531410.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:10.963Z,1520531410.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:11.325Z,1520531411.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:11.363Z,1520531411.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:11.727Z,1520531411.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:11.758Z,1520531411.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:12.137Z,1520531412.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:12.170Z,1520531412.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:12.541Z,1520531412.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:12.573Z,1520531412.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:12.951Z,1520531412.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:12.966Z,1520531412.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:13.327Z,1520531413.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:13.363Z,1520531413.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:13.723Z,1520531413.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:13.756Z,1520531413.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:14.138Z,1520531414.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:14.169Z,1520531414.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:14.529Z,1520531414.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:14.566Z,1520531414.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:14.955Z,1520531414.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:14.975Z,1520531414.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:15.328Z,1520531415.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:15.344Z,1520531415.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:15.725Z,1520531415.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:15.741Z,1520531415.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:16.142Z,1520531416.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:16.167Z,1520531416.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:16.556Z,1520531416.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:16.572Z,1520531416.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:16.942Z,1520531416.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:16.967Z,1520531416.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:17.328Z,1520531417.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:17.366Z,1520531417.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:17.727Z,1520531417.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:17.743Z,1520531417.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:18.142Z,1520531418.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:18.173Z,1520531418.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:18.546Z,1520531418.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:18.581Z,1520531418.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:18.937Z,1520531418.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:18.952Z,1520531418.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:19.336Z,1520531419.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:19.351Z,1520531419.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:19.731Z,1520531419.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:19.754Z,1520531419.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:20.141Z,1520531420.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:20.156Z,1520531420.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:20.536Z,1520531420.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:20.559Z,1520531420.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:20.942Z,1520531420.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:20.957Z,1520531420.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:21.319Z,1520531421.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:21.348Z,1520531421.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:24.434Z,1520531424.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:24.450Z,1520531424.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:24.557Z,1520531424.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:24.597Z,1520531424.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:24.917Z,1520531424.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:24.947Z,1520531424.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:25.310Z,1520531425.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:25.337Z,1520531425.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:25.703Z,1520531425.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:25.723Z,1520531425.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:26.104Z,1520531426.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:26.150Z,1520531426.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:26.504Z,1520531426.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:26.519Z,1520531426.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:26.900Z,1520531426.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:26.915Z,1520531426.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:27.318Z,1520531427.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:27.353Z,1520531427.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:27.713Z,1520531427.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:27.728Z,1520531427.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:28.112Z,1520531428.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:28.135Z,1520531428.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:28.506Z,1520531428.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:28.523Z,1520531428.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:28.899Z,1520531428.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:28.918Z,1520531428.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:29.307Z,1520531429.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:29.322Z,1520531429.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:29.708Z,1520531429.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:29.730Z,1520531429.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:30.108Z,1520531430.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:30.123Z,1520531430.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:30.512Z,1520531430.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:30.535Z,1520531430.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:30.916Z,1520531430.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:30.932Z,1520531430.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:31.317Z,1520531431.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:31.333Z,1520531431.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:31.707Z,1520531431.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:31.723Z,1520531431.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:32.103Z,1520531432.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:32.123Z,1520531432.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:32.491Z,1520531432.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:32.527Z,1520531432.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:32.907Z,1520531432.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:32.922Z,1520531432.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:33.313Z,1520531433.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:33.335Z,1520531433.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:33.716Z,1520531433.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:33.731Z,1520531433.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:34.116Z,1520531434.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:34.139Z,1520531434.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:34.507Z,1520531434.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:34.523Z,1520531434.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:34.891Z,1520531434.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:34.918Z,1520531434.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:35.307Z,1520531435.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:35.322Z,1520531435.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:35.699Z,1520531435.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:35.721Z,1520531435.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:36.103Z,1520531436.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:36.122Z,1520531436.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:36.517Z,1520531436.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:36.532Z,1520531436.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:36.917Z,1520531436.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:36.933Z,1520531436.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:37.317Z,1520531437.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:37.331Z,1520531437.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:37.707Z,1520531437.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:37.723Z,1520531437.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:38.110Z,1520531438.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:38.130Z,1520531438.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:38.508Z,1520531438.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:38.523Z,1520531438.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:38.907Z,1520531438.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:38.930Z,1520531438.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:39.316Z,1520531439.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:39.332Z,1520531439.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:39.720Z,1520531439.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:39.744Z,1520531439.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:40.116Z,1520531440.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:40.131Z,1520531440.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:40.503Z,1520531440.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:40.523Z,1520531440.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:40.891Z,1520531440.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:40.925Z,1520531440.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:41.296Z,1520531441.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:41.311Z,1520531441.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:41.699Z,1520531441.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:41.726Z,1520531441.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:42.094Z,1520531442.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:42.130Z,1520531442.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:42.517Z,1520531442.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:42.533Z,1520531442.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:42.917Z,1520531442.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:42.932Z,1520531442.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:43.308Z,1520531443.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:43.335Z,1520531443.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:43.699Z,1520531443.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:43.731Z,1520531443.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:44.094Z,1520531444.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:44.121Z,1520531444.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:44.497Z,1520531444.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:44.524Z,1520531444.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:44.899Z,1520531444.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:44.925Z,1520531444.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:45.313Z,1520531445.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:45.329Z,1520531445.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:45.715Z,1520531445.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:45.730Z,1520531445.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:46.118Z,1520531446.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:46.134Z,1520531446.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:46.499Z,1520531446.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:46.527Z,1520531446.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:46.896Z,1520531446.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:46.934Z,1520531446.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:47.293Z,1520531447.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:47.327Z,1520531447.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:47.698Z,1520531447.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:47.730Z,1520531447.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:48.100Z,1520531448.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:48.141Z,1520531448.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:48.507Z,1520531448.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:48.545Z,1520531448.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:48.923Z,1520531448.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:48.939Z,1520531448.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:49.310Z,1520531449.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:49.340Z,1520531449.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:49.692Z,1520531449.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:49.708Z,1520531449.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:50.107Z,1520531450.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:50.139Z,1520531450.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:50.500Z,1520531450.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:50.516Z,1520531450.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:50.899Z,1520531450.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:50.919Z,1520531450.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:51.313Z,1520531451.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:51.348Z,1520531451.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:51.721Z,1520531451.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:51.749Z,1520531451.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:52.113Z,1520531452.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:52.153Z,1520531452.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:52.504Z,1520531452.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:52.519Z,1520531452.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:52.903Z,1520531452.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:52.918Z,1520531452.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:53.296Z,1520531453.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:53.324Z,1520531453.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:53.706Z,1520531453.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:53.727Z,1520531453.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:54.104Z,1520531454.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:54.119Z,1520531454.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:54.509Z,1520531454.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:54.525Z,1520531454.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:54.909Z,1520531454.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:54.924Z,1520531454.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:55.308Z,1520531455.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:55.323Z,1520531455.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:55.695Z,1520531455.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:55.726Z,1520531455.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:56.107Z,1520531456.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:56.127Z,1520531456.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:56.508Z,1520531456.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:56.523Z,1520531456.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:56.907Z,1520531456.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:56.927Z,1520531456.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:57.312Z,1520531457.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:57.327Z,1520531457.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:57.712Z,1520531457.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:57.727Z,1520531457.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:58.112Z,1520531458.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:58.131Z,1520531458.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:58.507Z,1520531458.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:58.522Z,1520531458.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:58.903Z,1520531458.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:58.919Z,1520531458.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:59.300Z,1520531459.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:59.315Z,1520531459.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:50:59.701Z,1520531459.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:50:59.721Z,1520531459.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:00.099Z,1520531460.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:00.118Z,1520531460.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:00.512Z,1520531460.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:00.528Z,1520531460.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:00.914Z,1520531460.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:00.931Z,1520531460.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:01.312Z,1520531461.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:01.328Z,1520531461.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:01.693Z,1520531461.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:01.720Z,1520531461.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:02.106Z,1520531462.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:02.127Z,1520531462.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:02.491Z,1520531462.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:02.530Z,1520531462.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:02.906Z,1520531462.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:02.927Z,1520531462.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:03.313Z,1520531463.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:03.329Z,1520531463.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:03.718Z,1520531463.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:03.734Z,1520531463.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:04.117Z,1520531464.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:04.133Z,1520531464.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:04.495Z,1520531464.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:04.527Z,1520531464.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:04.891Z,1520531464.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:04.924Z,1520531464.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:05.295Z,1520531465.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:05.330Z,1520531465.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:05.696Z,1520531465.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:05.724Z,1520531465.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:06.098Z,1520531466.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:06.139Z,1520531466.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:06.501Z,1520531466.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:06.537Z,1520531466.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:06.909Z,1520531466.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:06.935Z,1520531466.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:07.313Z,1520531467.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:07.337Z,1520531467.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:07.696Z,1520531467.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:07.712Z,1520531467.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:08.103Z,1520531468.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:08.142Z,1520531468.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:08.503Z,1520531468.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:08.518Z,1520531468.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:08.895Z,1520531468.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:08.911Z,1520531468.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:09.313Z,1520531469.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:09.347Z,1520531469.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:09.709Z,1520531469.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:09.724Z,1520531469.724 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:09.724Z,1520531469.724 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 202
2018-03-08T17:51:09.724Z,1520531469.724 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T17:51:09.738Z,1520531469.738 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:09.739Z,1520531469.739 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 202
2018-03-08T17:51:09.739Z,1520531469.739 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T17:51:09.740Z,1520531469.740 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:09.751Z,1520531469.751 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 202
2018-03-08T17:51:09.752Z,1520531469.752 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T17:51:09.763Z,1520531469.763 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T17:51:09.763Z,1520531469.763 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T17:51:09.764Z,1520531469.764 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T17:51:10.102Z,1520531470.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:10.151Z,1520531470.151 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T17:51:10.151Z,1520531470.151 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 202
2018-03-08T17:51:10.151Z,1520531470.151 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T17:51:10.151Z,1520531470.151 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 202
2018-03-08T17:51:10.152Z,1520531470.152 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T17:51:10.152Z,1520531470.152 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 202
2018-03-08T17:51:10.498Z,1520531470.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:10.530Z,1520531470.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T17:51:10.530Z,1520531470.530 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:51:10.530Z,1520531470.530 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:51:10.531Z,1520531470.531 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T17:51:10.531Z,1520531470.531 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:51:10.531Z,1520531470.531 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:51:10.532Z,1520531470.532 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T17:51:10.532Z,1520531470.532 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:51:10.537Z,1520531470.537 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:51:10.891Z,1520531470.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:10.926Z,1520531470.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T17:51:10.927Z,1520531470.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:11.292Z,1520531471.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:11.327Z,1520531471.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T17:51:11.328Z,1520531471.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:11.703Z,1520531471.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:11.718Z,1520531471.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T17:51:11.719Z,1520531471.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:12.103Z,1520531472.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:12.118Z,1520531472.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T17:51:12.119Z,1520531472.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:12.509Z,1520531472.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:12.530Z,1520531472.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T17:51:12.531Z,1520531472.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:12.916Z,1520531472.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:12.931Z,1520531472.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T17:51:12.932Z,1520531472.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:13.317Z,1520531473.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:13.332Z,1520531473.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T17:51:13.333Z,1520531473.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:13.688Z,1520531473.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:13.719Z,1520531473.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T17:51:13.720Z,1520531473.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:14.098Z,1520531474.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:14.124Z,1520531474.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T17:51:14.125Z,1520531474.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:14.491Z,1520531474.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:14.524Z,1520531474.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T17:51:14.525Z,1520531474.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:14.899Z,1520531474.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:14.924Z,1520531474.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T17:51:14.926Z,1520531474.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:15.321Z,1520531475.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:15.339Z,1520531475.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T17:51:15.340Z,1520531475.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:15.713Z,1520531475.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:15.728Z,1520531475.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T17:51:15.729Z,1520531475.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:16.117Z,1520531476.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:16.132Z,1520531476.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T17:51:16.134Z,1520531476.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:16.495Z,1520531476.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:16.521Z,1520531476.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T17:51:16.522Z,1520531476.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:16.895Z,1520531476.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:16.922Z,1520531476.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T17:51:16.923Z,1520531476.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:17.292Z,1520531477.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:17.330Z,1520531477.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T17:51:17.331Z,1520531477.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:17.699Z,1520531477.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:17.726Z,1520531477.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T17:51:17.727Z,1520531477.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:18.095Z,1520531478.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:18.131Z,1520531478.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T17:51:18.133Z,1520531478.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:18.501Z,1520531478.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:18.536Z,1520531478.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T17:51:18.537Z,1520531478.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:18.916Z,1520531478.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:18.939Z,1520531478.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T17:51:18.941Z,1520531478.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:19.317Z,1520531479.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:19.331Z,1520531479.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T17:51:19.332Z,1520531479.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:19.692Z,1520531479.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:19.723Z,1520531479.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T17:51:19.724Z,1520531479.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:20.095Z,1520531480.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:20.130Z,1520531480.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T17:51:20.131Z,1520531480.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:20.491Z,1520531480.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:20.535Z,1520531480.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T17:51:20.536Z,1520531480.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:20.899Z,1520531480.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:20.930Z,1520531480.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T17:51:20.931Z,1520531480.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:21.305Z,1520531481.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:21.331Z,1520531481.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T17:51:21.332Z,1520531481.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:21.718Z,1520531481.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:21.734Z,1520531481.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T17:51:21.735Z,1520531481.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:24.814Z,1520531484.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:24.829Z,1520531484.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2018-03-08T17:51:24.830Z,1520531484.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:24.938Z,1520531484.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:24.973Z,1520531484.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-08T17:51:24.974Z,1520531484.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:25.290Z,1520531485.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:25.304Z,1520531485.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T17:51:25.305Z,1520531485.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:25.686Z,1520531485.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:25.722Z,1520531485.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T17:51:25.723Z,1520531485.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:26.092Z,1520531486.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:26.107Z,1520531486.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T17:51:26.108Z,1520531486.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:26.501Z,1520531486.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:26.516Z,1520531486.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T17:51:26.534Z,1520531486.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:26.898Z,1520531486.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:26.913Z,1520531486.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T17:51:26.914Z,1520531486.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:27.293Z,1520531487.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:27.308Z,1520531487.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T17:51:27.309Z,1520531487.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:27.690Z,1520531487.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:27.705Z,1520531487.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T17:51:27.706Z,1520531487.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:28.083Z,1520531488.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:28.102Z,1520531488.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T17:51:28.103Z,1520531488.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:28.491Z,1520531488.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:28.507Z,1520531488.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T17:51:28.508Z,1520531488.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:28.887Z,1520531488.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:28.902Z,1520531488.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T17:51:28.903Z,1520531488.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:29.297Z,1520531489.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:29.313Z,1520531489.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T17:51:29.314Z,1520531489.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:29.692Z,1520531489.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:29.707Z,1520531489.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T17:51:29.708Z,1520531489.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:30.092Z,1520531490.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:30.115Z,1520531490.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:30.490Z,1520531490.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:30.505Z,1520531490.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:30.881Z,1520531490.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:30.909Z,1520531490.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:31.291Z,1520531491.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:31.310Z,1520531491.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:31.692Z,1520531491.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:31.708Z,1520531491.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:32.090Z,1520531492.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:32.110Z,1520531492.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:32.501Z,1520531492.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:32.522Z,1520531492.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:32.900Z,1520531492.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:32.915Z,1520531492.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:33.296Z,1520531493.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:33.311Z,1520531493.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:33.683Z,1520531493.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:33.705Z,1520531493.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:34.075Z,1520531494.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:34.110Z,1520531494.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:34.493Z,1520531494.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:34.509Z,1520531494.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:34.890Z,1520531494.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:34.910Z,1520531494.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:35.301Z,1520531495.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:35.316Z,1520531495.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:35.689Z,1520531495.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:35.713Z,1520531495.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:36.101Z,1520531496.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:36.117Z,1520531496.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:36.501Z,1520531496.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:36.516Z,1520531496.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:36.890Z,1520531496.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:36.910Z,1520531496.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:37.279Z,1520531497.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:37.311Z,1520531497.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:37.679Z,1520531497.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:37.705Z,1520531497.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:38.090Z,1520531498.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:38.110Z,1520531498.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:38.497Z,1520531498.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:38.513Z,1520531498.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:38.904Z,1520531498.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:38.919Z,1520531498.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:39.289Z,1520531499.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:39.321Z,1520531499.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:39.691Z,1520531499.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:39.711Z,1520531499.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:40.074Z,1520531500.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:40.100Z,1520531500.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:40.492Z,1520531500.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:40.507Z,1520531500.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:40.878Z,1520531500.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:40.910Z,1520531500.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:41.298Z,1520531501.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:41.318Z,1520531501.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:41.697Z,1520531501.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:41.713Z,1520531501.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:42.098Z,1520531502.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:42.113Z,1520531502.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:42.475Z,1520531502.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:42.509Z,1520531502.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:42.891Z,1520531502.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:42.906Z,1520531502.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:43.279Z,1520531503.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:43.311Z,1520531503.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:43.679Z,1520531503.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:43.706Z,1520531503.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:44.092Z,1520531504.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:44.107Z,1520531504.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:44.504Z,1520531504.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:44.520Z,1520531504.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:44.904Z,1520531504.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:44.919Z,1520531504.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:45.298Z,1520531505.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:45.313Z,1520531505.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:45.679Z,1520531505.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:45.710Z,1520531505.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:46.079Z,1520531506.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:46.115Z,1520531506.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:46.483Z,1520531506.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:46.510Z,1520531506.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:46.879Z,1520531506.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:46.905Z,1520531506.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:47.302Z,1520531507.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:47.317Z,1520531507.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:47.695Z,1520531507.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:47.714Z,1520531507.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:48.101Z,1520531508.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:48.122Z,1520531508.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:48.482Z,1520531508.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:48.509Z,1520531508.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:48.878Z,1520531508.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:48.905Z,1520531508.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:49.278Z,1520531509.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:49.305Z,1520531509.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:49.675Z,1520531509.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:49.707Z,1520531509.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:50.083Z,1520531510.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:50.109Z,1520531510.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:50.497Z,1520531510.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:50.513Z,1520531510.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:50.903Z,1520531510.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:50.917Z,1520531510.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:51.289Z,1520531511.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:51.311Z,1520531511.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:51.679Z,1520531511.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:51.705Z,1520531511.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:52.075Z,1520531512.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:52.110Z,1520531512.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:52.483Z,1520531512.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:52.510Z,1520531512.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:52.879Z,1520531512.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:52.911Z,1520531512.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:53.302Z,1520531513.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:53.317Z,1520531513.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:53.693Z,1520531513.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:53.713Z,1520531513.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:54.097Z,1520531514.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:54.113Z,1520531514.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:54.479Z,1520531514.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:54.505Z,1520531514.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:54.883Z,1520531514.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:54.909Z,1520531514.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:55.279Z,1520531515.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:55.305Z,1520531515.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:55.680Z,1520531515.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:55.707Z,1520531515.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:56.081Z,1520531516.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:56.112Z,1520531516.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:56.497Z,1520531516.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:56.565Z,1520531516.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:56.578Z,1520531516.578 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T17:51:56.921Z,1520531516.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:56.938Z,1520531516.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:57.287Z,1520531517.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:57.327Z,1520531517.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:57.680Z,1520531517.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:57.722Z,1520531517.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:58.080Z,1520531518.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:58.155Z,1520531518.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:58.481Z,1520531518.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:58.496Z,1520531518.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:58.882Z,1520531518.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:58.944Z,1520531518.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:59.293Z,1520531519.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:59.328Z,1520531519.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:51:59.693Z,1520531519.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:51:59.708Z,1520531519.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:00.111Z,1520531520.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:00.148Z,1520531520.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:00.490Z,1520531520.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:00.510Z,1520531520.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:00.885Z,1520531520.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:00.901Z,1520531520.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:01.288Z,1520531521.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:01.303Z,1520531521.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:01.692Z,1520531521.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:01.708Z,1520531521.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:02.092Z,1520531522.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:02.115Z,1520531522.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:02.494Z,1520531522.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:02.510Z,1520531522.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:02.893Z,1520531522.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:02.908Z,1520531522.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:03.290Z,1520531523.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:03.317Z,1520531523.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:03.689Z,1520531523.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:03.713Z,1520531523.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:04.090Z,1520531524.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:04.105Z,1520531524.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:04.490Z,1520531524.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:04.507Z,1520531524.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:04.883Z,1520531524.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:04.914Z,1520531524.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:05.304Z,1520531525.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:05.319Z,1520531525.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:05.692Z,1520531525.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:05.709Z,1520531525.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:06.093Z,1520531526.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:06.123Z,1520531526.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:06.482Z,1520531526.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:06.510Z,1520531526.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:06.883Z,1520531526.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:06.910Z,1520531526.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:07.279Z,1520531527.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:07.306Z,1520531527.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:07.679Z,1520531527.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:07.706Z,1520531527.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:08.083Z,1520531528.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:08.109Z,1520531528.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:08.497Z,1520531528.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:08.513Z,1520531528.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:08.906Z,1520531528.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:08.920Z,1520531528.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:09.297Z,1520531529.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:09.317Z,1520531529.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:09.679Z,1520531529.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:09.705Z,1520531529.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:10.079Z,1520531530.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:10.106Z,1520531530.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:10.483Z,1520531530.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:10.511Z,1520531530.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:10.878Z,1520531530.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:10.905Z,1520531530.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:11.302Z,1520531531.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:11.317Z,1520531531.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:11.695Z,1520531531.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:11.715Z,1520531531.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:12.098Z,1520531532.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:12.113Z,1520531532.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:12.479Z,1520531532.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:12.505Z,1520531532.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:12.883Z,1520531532.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:12.909Z,1520531532.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:13.279Z,1520531533.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:13.305Z,1520531533.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:13.679Z,1520531533.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:13.710Z,1520531533.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:14.083Z,1520531534.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:14.114Z,1520531534.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:14.497Z,1520531534.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:14.513Z,1520531534.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:14.902Z,1520531534.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:14.917Z,1520531534.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:15.293Z,1520531535.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:15.315Z,1520531535.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:15.679Z,1520531535.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:15.705Z,1520531535.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:16.079Z,1520531536.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:16.105Z,1520531536.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:16.483Z,1520531536.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:16.510Z,1520531536.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:16.879Z,1520531536.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:16.906Z,1520531536.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:17.301Z,1520531537.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:17.316Z,1520531537.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:17.696Z,1520531537.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:17.718Z,1520531537.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:18.101Z,1520531538.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:18.116Z,1520531538.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:18.483Z,1520531538.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:18.509Z,1520531538.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:18.883Z,1520531538.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:18.918Z,1520531538.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:19.283Z,1520531539.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:19.309Z,1520531539.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:19.683Z,1520531539.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:19.710Z,1520531539.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:20.083Z,1520531540.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:20.109Z,1520531540.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:20.497Z,1520531540.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:20.513Z,1520531540.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:20.901Z,1520531540.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:20.916Z,1520531540.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:21.293Z,1520531541.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:21.315Z,1520531541.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:21.683Z,1520531541.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:21.710Z,1520531541.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:22.079Z,1520531542.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:22.106Z,1520531542.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:25.199Z,1520531545.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:25.215Z,1520531545.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:25.309Z,1520531545.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:25.353Z,1520531545.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:25.681Z,1520531545.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:25.711Z,1520531545.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:26.095Z,1520531546.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:26.110Z,1520531546.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:26.478Z,1520531546.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:26.507Z,1520531546.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:26.870Z,1520531546.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:26.893Z,1520531546.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:27.271Z,1520531547.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:27.285Z,1520531547.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:27.664Z,1520531547.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:27.679Z,1520531547.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:28.068Z,1520531548.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:28.090Z,1520531548.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:28.482Z,1520531548.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:28.518Z,1520531548.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:28.881Z,1520531548.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:28.896Z,1520531548.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:29.277Z,1520531549.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:29.292Z,1520531549.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:29.671Z,1520531549.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:29.686Z,1520531549.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:30.072Z,1520531550.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:30.087Z,1520531550.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:30.472Z,1520531550.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:30.487Z,1520531550.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:30.871Z,1520531550.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:30.886Z,1520531550.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:31.272Z,1520531551.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:31.288Z,1520531551.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:31.677Z,1520531551.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:31.693Z,1520531551.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:32.073Z,1520531552.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:32.088Z,1520531552.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:32.472Z,1520531552.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:32.487Z,1520531552.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:32.872Z,1520531552.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:32.887Z,1520531552.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:33.271Z,1520531553.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:33.287Z,1520531553.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:33.664Z,1520531553.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:33.688Z,1520531553.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:34.075Z,1520531554.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:34.090Z,1520531554.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:34.477Z,1520531554.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:34.492Z,1520531554.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:34.881Z,1520531554.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:34.896Z,1520531554.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:35.277Z,1520531555.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:35.293Z,1520531555.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:35.675Z,1520531555.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:35.690Z,1520531555.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:36.075Z,1520531556.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:36.091Z,1520531556.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:36.475Z,1520531556.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:36.491Z,1520531556.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:36.872Z,1520531556.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:36.894Z,1520531556.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:37.278Z,1520531557.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:37.293Z,1520531557.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:37.677Z,1520531557.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:37.692Z,1520531557.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:38.078Z,1520531558.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:38.093Z,1520531558.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:38.477Z,1520531558.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:38.493Z,1520531558.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:38.870Z,1520531558.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:38.890Z,1520531558.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:39.274Z,1520531559.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:39.413Z,1520531559.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:39.666Z,1520531559.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:39.686Z,1520531559.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:40.075Z,1520531560.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:40.091Z,1520531560.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:40.482Z,1520531560.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:40.502Z,1520531560.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:40.878Z,1520531560.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:40.894Z,1520531560.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:41.277Z,1520531561.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:41.293Z,1520531561.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:41.673Z,1520531561.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:41.689Z,1520531561.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:42.076Z,1520531562.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:42.098Z,1520531562.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:42.477Z,1520531562.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:42.493Z,1520531562.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:42.877Z,1520531562.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:42.892Z,1520531562.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:43.274Z,1520531563.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:43.303Z,1520531563.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:43.689Z,1520531563.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:43.705Z,1520531563.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:44.086Z,1520531564.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:44.101Z,1520531564.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:44.475Z,1520531564.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:44.495Z,1520531564.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:44.862Z,1520531564.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:44.901Z,1520531564.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:45.276Z,1520531565.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:45.291Z,1520531565.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:45.662Z,1520531565.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:45.693Z,1520531565.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:46.066Z,1520531566.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:46.093Z,1520531566.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:46.480Z,1520531566.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:46.506Z,1520531566.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:46.881Z,1520531566.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:46.897Z,1520531566.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:47.281Z,1520531567.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:47.296Z,1520531567.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:47.659Z,1520531567.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:47.696Z,1520531567.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:48.060Z,1520531568.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:48.095Z,1520531568.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:48.462Z,1520531568.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:48.494Z,1520531568.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:48.863Z,1520531568.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:48.891Z,1520531568.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:49.282Z,1520531569.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:49.297Z,1520531569.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:49.686Z,1520531569.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:49.706Z,1520531569.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:50.086Z,1520531570.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:50.101Z,1520531570.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:50.467Z,1520531570.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:50.498Z,1520531570.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:50.862Z,1520531570.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:50.895Z,1520531570.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:51.259Z,1520531571.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:51.292Z,1520531571.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:51.657Z,1520531571.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:51.681Z,1520531571.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:52.066Z,1520531572.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:52.093Z,1520531572.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:52.477Z,1520531572.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:52.502Z,1520531572.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:52.877Z,1520531572.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:52.899Z,1520531572.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:53.277Z,1520531573.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:53.299Z,1520531573.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:53.659Z,1520531573.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:53.695Z,1520531573.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:54.060Z,1520531574.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:54.095Z,1520531574.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:54.468Z,1520531574.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:54.497Z,1520531574.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:54.863Z,1520531574.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:54.902Z,1520531574.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:55.273Z,1520531575.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:55.310Z,1520531575.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:55.681Z,1520531575.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:55.703Z,1520531575.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:56.089Z,1520531576.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:56.104Z,1520531576.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:56.460Z,1520531576.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:56.500Z,1520531576.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:56.863Z,1520531576.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:56.898Z,1520531576.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:57.259Z,1520531577.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:57.302Z,1520531577.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:57.657Z,1520531577.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:57.673Z,1520531577.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:58.066Z,1520531578.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:58.103Z,1520531578.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:58.477Z,1520531578.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:58.505Z,1520531578.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:58.890Z,1520531578.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:58.905Z,1520531578.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:59.274Z,1520531579.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:59.301Z,1520531579.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:52:59.663Z,1520531579.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:52:59.678Z,1520531579.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:00.067Z,1520531580.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:00.103Z,1520531580.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:00.472Z,1520531580.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:00.487Z,1520531580.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:00.871Z,1520531580.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:00.890Z,1520531580.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:01.270Z,1520531581.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:01.286Z,1520531581.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:01.685Z,1520531581.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:01.709Z,1520531581.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:02.085Z,1520531582.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:02.118Z,1520531582.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:02.477Z,1520531582.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:02.522Z,1520531582.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:02.872Z,1520531582.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:02.887Z,1520531582.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:03.272Z,1520531583.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:03.288Z,1520531583.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:03.668Z,1520531583.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:03.683Z,1520531583.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:04.073Z,1520531584.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:04.088Z,1520531584.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:04.485Z,1520531584.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:04.516Z,1520531584.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:04.881Z,1520531584.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:04.913Z,1520531584.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:05.285Z,1520531585.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:05.317Z,1520531585.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:05.675Z,1520531585.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:05.691Z,1520531585.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:06.068Z,1520531586.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:06.084Z,1520531586.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:06.471Z,1520531586.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:06.486Z,1520531586.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:06.875Z,1520531586.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:06.891Z,1520531586.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:07.276Z,1520531587.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:07.298Z,1520531587.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:07.681Z,1520531587.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:07.696Z,1520531587.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:08.081Z,1520531588.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:08.098Z,1520531588.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:08.475Z,1520531588.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:08.490Z,1520531588.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:08.872Z,1520531588.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:08.888Z,1520531588.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:09.269Z,1520531589.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:09.298Z,1520531589.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:09.657Z,1520531589.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:09.695Z,1520531589.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:10.075Z,1520531590.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:10.099Z,1520531590.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:10.489Z,1520531590.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:10.507Z,1520531590.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:10.888Z,1520531590.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:10.903Z,1520531590.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:11.285Z,1520531591.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:11.300Z,1520531591.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:11.663Z,1520531591.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:11.695Z,1520531591.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:12.067Z,1520531592.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:12.093Z,1520531592.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:12.463Z,1520531592.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:12.490Z,1520531592.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:12.863Z,1520531592.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:12.899Z,1520531592.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:13.286Z,1520531593.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:13.301Z,1520531593.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:13.685Z,1520531593.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:13.701Z,1520531593.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:14.082Z,1520531594.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:14.105Z,1520531594.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:14.459Z,1520531594.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:14.494Z,1520531594.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:14.862Z,1520531594.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:14.895Z,1520531594.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:15.263Z,1520531595.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:15.291Z,1520531595.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:15.664Z,1520531595.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:15.679Z,1520531595.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:16.067Z,1520531596.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:16.102Z,1520531596.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:16.477Z,1520531596.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:16.493Z,1520531596.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:16.877Z,1520531596.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:16.914Z,1520531596.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:17.277Z,1520531597.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:17.293Z,1520531597.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:17.671Z,1520531597.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:17.775Z,1520531597.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:18.067Z,1520531598.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:18.083Z,1520531598.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:18.474Z,1520531598.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:18.489Z,1520531598.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:18.875Z,1520531598.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:18.890Z,1520531598.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:19.286Z,1520531599.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:19.317Z,1520531599.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:19.681Z,1520531599.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:19.779Z,1520531599.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:20.078Z,1520531600.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:20.094Z,1520531600.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:20.463Z,1520531600.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:20.499Z,1520531600.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:20.876Z,1520531600.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:20.898Z,1520531600.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:21.277Z,1520531601.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:21.293Z,1520531601.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:21.663Z,1520531601.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:21.687Z,1520531601.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:22.071Z,1520531602.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:22.087Z,1520531602.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:22.478Z,1520531602.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:22.515Z,1520531602.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:25.605Z,1520531605.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:25.626Z,1520531605.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:25.738Z,1520531605.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:25.783Z,1520531605.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:26.108Z,1520531606.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:26.125Z,1520531606.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:26.487Z,1520531606.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:26.514Z,1520531606.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:26.901Z,1520531606.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:26.921Z,1520531606.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:27.317Z,1520531607.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:27.332Z,1520531607.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:27.716Z,1520531607.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:27.731Z,1520531607.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:28.109Z,1520531608.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:28.124Z,1520531608.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:28.503Z,1520531608.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:28.518Z,1520531608.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:28.903Z,1520531608.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:28.918Z,1520531608.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:29.292Z,1520531609.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:29.330Z,1520531609.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:29.705Z,1520531609.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:29.720Z,1520531609.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:30.103Z,1520531610.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:30.118Z,1520531610.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:30.509Z,1520531610.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:30.525Z,1520531610.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:30.909Z,1520531610.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:30.924Z,1520531610.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:31.306Z,1520531611.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:31.321Z,1520531611.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:31.691Z,1520531611.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:31.722Z,1520531611.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:32.104Z,1520531612.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:32.119Z,1520531612.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:32.504Z,1520531612.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:32.519Z,1520531612.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:32.891Z,1520531612.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:32.922Z,1520531612.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:33.313Z,1520531613.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:33.329Z,1520531613.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:33.709Z,1520531613.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:33.725Z,1520531613.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:34.110Z,1520531614.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:34.130Z,1520531614.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:34.503Z,1520531614.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:34.518Z,1520531614.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:34.903Z,1520531614.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:34.918Z,1520531614.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:35.291Z,1520531615.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:35.326Z,1520531615.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:35.687Z,1520531615.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:35.722Z,1520531615.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:36.103Z,1520531616.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:36.119Z,1520531616.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:36.509Z,1520531616.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:36.524Z,1520531616.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:36.917Z,1520531616.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:36.931Z,1520531616.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:37.309Z,1520531617.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:37.325Z,1520531617.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:37.707Z,1520531617.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:37.727Z,1520531617.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:38.103Z,1520531618.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:38.118Z,1520531618.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:38.502Z,1520531618.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:38.522Z,1520531618.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:38.891Z,1520531618.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:38.927Z,1520531618.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:39.314Z,1520531619.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:39.329Z,1520531619.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:39.709Z,1520531619.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:39.725Z,1520531619.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:40.109Z,1520531620.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:40.125Z,1520531620.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:40.491Z,1520531620.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:40.526Z,1520531620.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:40.903Z,1520531620.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:40.919Z,1520531620.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:41.291Z,1520531621.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:41.322Z,1520531621.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:41.705Z,1520531621.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:41.720Z,1520531621.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:42.103Z,1520531622.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:42.118Z,1520531622.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:42.505Z,1520531622.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:42.534Z,1520531622.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:42.917Z,1520531622.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:42.934Z,1520531622.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:43.313Z,1520531623.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:43.329Z,1520531623.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:43.692Z,1520531623.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:43.718Z,1520531623.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:44.087Z,1520531624.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:44.119Z,1520531624.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:44.495Z,1520531624.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:44.522Z,1520531624.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:44.891Z,1520531624.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:44.917Z,1520531624.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:45.309Z,1520531625.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:45.325Z,1520531625.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:45.718Z,1520531625.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:45.739Z,1520531625.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:46.113Z,1520531626.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:46.129Z,1520531626.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:46.491Z,1520531626.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:46.519Z,1520531626.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:46.895Z,1520531626.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:46.922Z,1520531626.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:47.291Z,1520531627.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:47.317Z,1520531627.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:47.691Z,1520531627.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:47.734Z,1520531627.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:48.095Z,1520531628.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:48.121Z,1520531628.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:48.514Z,1520531628.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:48.529Z,1520531628.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:48.918Z,1520531628.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:48.933Z,1520531628.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:49.314Z,1520531629.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:49.329Z,1520531629.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:49.691Z,1520531629.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:49.717Z,1520531629.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:50.087Z,1520531630.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:50.123Z,1520531630.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:50.496Z,1520531630.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:50.521Z,1520531630.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:50.891Z,1520531630.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:50.917Z,1520531630.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:51.308Z,1520531631.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:51.335Z,1520531631.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:51.717Z,1520531631.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:51.732Z,1520531631.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:52.113Z,1520531632.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:52.128Z,1520531632.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:52.491Z,1520531632.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:52.529Z,1520531632.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:52.895Z,1520531632.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:52.926Z,1520531632.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:53.299Z,1520531633.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:53.325Z,1520531633.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:53.691Z,1520531633.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:53.730Z,1520531633.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:54.095Z,1520531634.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:54.127Z,1520531634.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:54.501Z,1520531634.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:54.536Z,1520531634.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:54.917Z,1520531634.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:54.932Z,1520531634.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:55.314Z,1520531635.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:55.335Z,1520531635.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:55.691Z,1520531635.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:55.726Z,1520531635.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:56.091Z,1520531636.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:56.130Z,1520531636.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:56.493Z,1520531636.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:56.529Z,1520531636.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:56.891Z,1520531636.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:56.926Z,1520531636.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:57.310Z,1520531637.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:57.337Z,1520531637.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:57.709Z,1520531637.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:57.737Z,1520531637.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:58.105Z,1520531638.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:58.132Z,1520531638.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:58.495Z,1520531638.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:58.535Z,1520531638.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:58.899Z,1520531638.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:58.931Z,1520531638.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:59.296Z,1520531639.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:59.312Z,1520531639.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:53:59.699Z,1520531639.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:53:59.714Z,1520531639.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:00.094Z,1520531640.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:00.109Z,1520531640.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:00.509Z,1520531640.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:00.543Z,1520531640.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:00.913Z,1520531640.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:00.941Z,1520531640.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:01.299Z,1520531641.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:01.314Z,1520531641.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:01.700Z,1520531641.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:01.742Z,1520531641.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:02.101Z,1520531642.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:02.116Z,1520531642.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:02.497Z,1520531642.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:02.513Z,1520531642.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:02.896Z,1520531642.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:02.913Z,1520531642.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:03.310Z,1520531643.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:03.345Z,1520531643.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:03.701Z,1520531643.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:03.718Z,1520531643.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:04.101Z,1520531644.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:04.118Z,1520531644.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:04.500Z,1520531644.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:04.514Z,1520531644.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:04.901Z,1520531644.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:04.916Z,1520531644.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:05.298Z,1520531645.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:05.313Z,1520531645.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:05.697Z,1520531645.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:05.711Z,1520531645.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:06.100Z,1520531646.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:06.115Z,1520531646.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:06.513Z,1520531646.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:06.549Z,1520531646.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:06.910Z,1520531646.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:06.925Z,1520531646.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:07.304Z,1520531647.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:07.319Z,1520531647.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:07.697Z,1520531647.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:07.717Z,1520531647.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:08.095Z,1520531648.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:08.118Z,1520531648.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:08.491Z,1520531648.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:08.514Z,1520531648.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:08.898Z,1520531648.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:08.918Z,1520531648.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:09.305Z,1520531649.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:09.320Z,1520531649.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:09.705Z,1520531649.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:09.720Z,1520531649.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:10.105Z,1520531650.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:10.121Z,1520531650.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:10.500Z,1520531650.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:10.515Z,1520531650.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:10.903Z,1520531650.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:10.918Z,1520531650.918 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:10.918Z,1520531650.918 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 203
2018-03-08T17:54:10.919Z,1520531650.919 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T17:54:10.920Z,1520531650.920 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:10.921Z,1520531650.921 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 203
2018-03-08T17:54:10.921Z,1520531650.921 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T17:54:10.922Z,1520531650.922 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:10.922Z,1520531650.922 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 203
2018-03-08T17:54:10.922Z,1520531650.922 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T17:54:10.946Z,1520531650.946 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T17:54:10.946Z,1520531650.946 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T17:54:10.946Z,1520531650.946 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T17:54:11.311Z,1520531651.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:11.337Z,1520531651.337 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T17:54:11.337Z,1520531651.337 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 203
2018-03-08T17:54:11.337Z,1520531651.337 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T17:54:11.337Z,1520531651.337 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 203
2018-03-08T17:54:11.338Z,1520531651.338 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T17:54:11.338Z,1520531651.338 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 203
2018-03-08T17:54:11.687Z,1520531651.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:11.719Z,1520531651.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T17:54:11.719Z,1520531651.719 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:54:11.719Z,1520531651.719 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:54:11.720Z,1520531651.720 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T17:54:11.720Z,1520531651.720 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:54:11.721Z,1520531651.721 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:54:11.721Z,1520531651.721 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T17:54:11.721Z,1520531651.721 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:54:11.722Z,1520531651.722 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:54:12.087Z,1520531652.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:12.122Z,1520531652.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T17:54:12.123Z,1520531652.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:12.513Z,1520531652.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:12.528Z,1520531652.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T17:54:12.529Z,1520531652.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:12.917Z,1520531652.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:12.931Z,1520531652.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T17:54:12.932Z,1520531652.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:13.305Z,1520531653.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:13.327Z,1520531653.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T17:54:13.328Z,1520531653.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:13.691Z,1520531653.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:13.726Z,1520531653.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T17:54:13.727Z,1520531653.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:14.091Z,1520531654.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:14.117Z,1520531654.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T17:54:14.118Z,1520531654.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:14.495Z,1520531654.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:14.522Z,1520531654.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T17:54:14.523Z,1520531654.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:14.891Z,1520531654.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:14.922Z,1520531654.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T17:54:14.923Z,1520531654.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:15.308Z,1520531655.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:15.331Z,1520531655.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T17:54:15.332Z,1520531655.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:15.706Z,1520531655.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:15.728Z,1520531655.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T17:54:15.729Z,1520531655.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:16.113Z,1520531656.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:16.128Z,1520531656.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T17:54:16.129Z,1520531656.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:16.491Z,1520531656.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:16.518Z,1520531656.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T17:54:16.519Z,1520531656.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:16.895Z,1520531656.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:16.921Z,1520531656.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T17:54:16.922Z,1520531656.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:17.292Z,1520531657.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:17.326Z,1520531657.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T17:54:17.327Z,1520531657.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:17.687Z,1520531657.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:17.718Z,1520531657.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T17:54:17.719Z,1520531657.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:18.095Z,1520531658.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:18.121Z,1520531658.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T17:54:18.122Z,1520531658.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:18.509Z,1520531658.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:18.524Z,1520531658.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T17:54:18.525Z,1520531658.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:18.909Z,1520531658.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:18.924Z,1520531658.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T17:54:18.925Z,1520531658.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:19.308Z,1520531659.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:19.331Z,1520531659.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T17:54:19.333Z,1520531659.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:19.691Z,1520531659.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:19.722Z,1520531659.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T17:54:19.723Z,1520531659.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:20.087Z,1520531660.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:20.122Z,1520531660.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T17:54:20.123Z,1520531660.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:20.496Z,1520531660.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:20.522Z,1520531660.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T17:54:20.523Z,1520531660.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:20.890Z,1520531660.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:20.922Z,1520531660.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T17:54:20.923Z,1520531660.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:20.926Z,1520531660.926 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T17:49:20.6Z
2018-03-08T17:54:20.926Z,1520531660.926 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T17:54:20.927Z,1520531660.927 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T17:54:21.309Z,1520531661.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:21.329Z,1520531661.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T17:54:21.330Z,1520531661.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:21.793Z,1520531661.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:21.826Z,1520531661.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T17:54:21.827Z,1520531661.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:22.117Z,1520531662.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:22.163Z,1520531662.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T17:54:22.164Z,1520531662.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:25.203Z,1520531665.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:25.218Z,1520531665.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2018-03-08T17:54:25.219Z,1520531665.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:25.318Z,1520531665.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:25.363Z,1520531665.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T17:54:25.364Z,1520531665.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:25.681Z,1520531665.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:25.696Z,1520531665.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T17:54:25.709Z,1520531665.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:26.049Z,1520531666.049 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0236.lzma
2018-03-08T17:54:26.097Z,1520531666.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:26.122Z,1520531666.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T17:54:26.123Z,1520531666.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:26.485Z,1520531666.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:26.500Z,1520531666.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T17:54:26.517Z,1520531666.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:26.848Z,1520531666.848 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0236.lzma.bak
2018-03-08T17:54:26.848Z,1520531666.848 [DataOverHttps](INFO): SBD MOMSN=7987845
2018-03-08T17:54:26.890Z,1520531666.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:26.917Z,1520531666.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T17:54:26.918Z,1520531666.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:27.456Z,1520531667.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:27.479Z,1520531667.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-03-08T17:54:27.479Z,1520531667.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:27.674Z,1520531667.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:27.706Z,1520531667.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T17:54:27.707Z,1520531667.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:28.081Z,1520531668.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:28.097Z,1520531668.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T17:54:28.098Z,1520531668.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:31.181Z,1520531671.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:31.197Z,1520531671.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:31.306Z,1520531671.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:31.346Z,1520531671.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:31.684Z,1520531671.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:31.706Z,1520531671.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:32.083Z,1520531672.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:32.099Z,1520531672.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:32.486Z,1520531672.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:32.501Z,1520531672.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:32.884Z,1520531672.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:32.906Z,1520531672.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:33.293Z,1520531673.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:33.308Z,1520531673.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:36.409Z,1520531676.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:36.433Z,1520531676.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:36.542Z,1520531676.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:36.582Z,1520531676.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:36.871Z,1520531676.871 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0237.lzma
2018-03-08T17:54:36.899Z,1520531676.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:36.940Z,1520531676.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:37.279Z,1520531677.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:37.306Z,1520531677.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:37.659Z,1520531677.659 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0237.lzma.bak
2018-03-08T17:54:37.659Z,1520531677.659 [DataOverHttps](INFO): SBD MOMSN=7987847
2018-03-08T17:54:37.701Z,1520531677.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:37.731Z,1520531677.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:38.281Z,1520531678.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:38.306Z,1520531678.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:38.309Z,1520531678.309 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T17:54:38.309Z,1520531678.309 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T17:54:38.309Z,1520531678.309 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T17:54:38.500Z,1520531678.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:38.535Z,1520531678.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:41.605Z,1520531681.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:41.621Z,1520531681.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:41.726Z,1520531681.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:41.783Z,1520531681.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:42.071Z,1520531682.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:42.102Z,1520531682.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:42.471Z,1520531682.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:42.486Z,1520531682.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:42.875Z,1520531682.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:42.915Z,1520531682.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:43.281Z,1520531683.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:43.313Z,1520531683.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:43.685Z,1520531683.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:43.700Z,1520531683.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:44.089Z,1520531684.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:44.125Z,1520531684.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:44.478Z,1520531684.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:44.493Z,1520531684.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:44.871Z,1520531684.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:44.886Z,1520531684.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:45.279Z,1520531685.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:45.294Z,1520531685.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:45.671Z,1520531685.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:45.693Z,1520531685.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:46.076Z,1520531686.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:46.091Z,1520531686.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:46.481Z,1520531686.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:46.497Z,1520531686.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:46.881Z,1520531686.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:46.896Z,1520531686.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:47.280Z,1520531687.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:47.296Z,1520531687.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:47.678Z,1520531687.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:47.693Z,1520531687.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:48.078Z,1520531688.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:48.099Z,1520531688.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:48.479Z,1520531688.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:48.494Z,1520531688.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:48.878Z,1520531688.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:48.893Z,1520531688.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:49.280Z,1520531689.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:49.295Z,1520531689.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:49.685Z,1520531689.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:49.700Z,1520531689.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:50.082Z,1520531690.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:50.098Z,1520531690.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:50.475Z,1520531690.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:50.490Z,1520531690.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:50.878Z,1520531690.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:50.893Z,1520531690.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:51.278Z,1520531691.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:51.293Z,1520531691.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:51.673Z,1520531691.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:51.693Z,1520531691.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:52.075Z,1520531692.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:52.091Z,1520531692.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:52.478Z,1520531692.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:52.498Z,1520531692.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:52.885Z,1520531692.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:52.901Z,1520531692.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:53.281Z,1520531693.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:53.296Z,1520531693.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:53.678Z,1520531693.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:53.693Z,1520531693.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:54.078Z,1520531694.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:54.093Z,1520531694.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:54.479Z,1520531694.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:54.494Z,1520531694.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:54.878Z,1520531694.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:54.899Z,1520531694.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:55.281Z,1520531695.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:55.297Z,1520531695.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:55.681Z,1520531695.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:55.695Z,1520531695.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:56.081Z,1520531696.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:56.097Z,1520531696.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:56.475Z,1520531696.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:56.490Z,1520531696.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:56.875Z,1520531696.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:56.891Z,1520531696.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:57.278Z,1520531697.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:57.293Z,1520531697.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:57.679Z,1520531697.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:57.695Z,1520531697.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:58.078Z,1520531698.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:58.093Z,1520531698.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:58.481Z,1520531698.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:58.497Z,1520531698.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:58.885Z,1520531698.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:58.901Z,1520531698.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:59.281Z,1520531699.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:59.302Z,1520531699.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:54:59.677Z,1520531699.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:54:59.693Z,1520531699.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:00.075Z,1520531700.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:00.090Z,1520531700.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:00.480Z,1520531700.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:00.494Z,1520531700.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:00.878Z,1520531700.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:00.893Z,1520531700.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:01.280Z,1520531701.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:01.295Z,1520531701.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:01.686Z,1520531701.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:01.701Z,1520531701.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:02.085Z,1520531702.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:02.101Z,1520531702.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:02.478Z,1520531702.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:02.499Z,1520531702.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:02.878Z,1520531702.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:02.893Z,1520531702.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:03.278Z,1520531703.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:03.293Z,1520531703.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:03.679Z,1520531703.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:03.699Z,1520531703.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:04.078Z,1520531704.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:04.093Z,1520531704.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:04.482Z,1520531704.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:04.498Z,1520531704.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:04.881Z,1520531704.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:04.897Z,1520531704.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:05.281Z,1520531705.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:05.302Z,1520531705.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:05.676Z,1520531705.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:05.691Z,1520531705.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:06.080Z,1520531706.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:06.095Z,1520531706.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:06.479Z,1520531706.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:06.495Z,1520531706.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:06.878Z,1520531706.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:06.893Z,1520531706.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:07.281Z,1520531707.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:07.297Z,1520531707.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:07.685Z,1520531707.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:07.700Z,1520531707.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:08.097Z,1520531708.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:08.129Z,1520531708.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:08.478Z,1520531708.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:08.494Z,1520531708.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:08.875Z,1520531708.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:08.890Z,1520531708.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:09.280Z,1520531709.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:09.295Z,1520531709.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:09.673Z,1520531709.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:09.694Z,1520531709.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:10.063Z,1520531710.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:10.098Z,1520531710.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:10.488Z,1520531710.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:10.504Z,1520531710.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:10.888Z,1520531710.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:10.903Z,1520531710.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:11.289Z,1520531711.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:11.310Z,1520531711.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:11.676Z,1520531711.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:11.691Z,1520531711.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:12.073Z,1520531712.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:12.101Z,1520531712.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:12.480Z,1520531712.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:12.495Z,1520531712.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:12.879Z,1520531712.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:12.894Z,1520531712.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:13.286Z,1520531713.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:13.301Z,1520531713.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:13.694Z,1520531713.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:13.709Z,1520531713.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:14.087Z,1520531714.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:14.110Z,1520531714.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:14.479Z,1520531714.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:14.495Z,1520531714.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:14.863Z,1520531714.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:14.896Z,1520531714.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:15.265Z,1520531715.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:15.303Z,1520531715.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:15.681Z,1520531715.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:15.697Z,1520531715.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:16.083Z,1520531716.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:16.102Z,1520531716.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:16.482Z,1520531716.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:16.503Z,1520531716.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:16.905Z,1520531716.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:16.921Z,1520531716.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:17.281Z,1520531717.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:17.296Z,1520531717.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:17.686Z,1520531717.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:17.715Z,1520531717.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:18.068Z,1520531718.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:18.085Z,1520531718.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:18.469Z,1520531718.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:18.484Z,1520531718.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:18.867Z,1520531718.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:18.883Z,1520531718.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:19.282Z,1520531719.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:19.298Z,1520531719.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:19.677Z,1520531719.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:19.703Z,1520531719.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:20.085Z,1520531720.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:20.119Z,1520531720.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:20.472Z,1520531720.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:20.487Z,1520531720.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:20.876Z,1520531720.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:20.891Z,1520531720.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:21.272Z,1520531721.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:21.288Z,1520531721.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:21.677Z,1520531721.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:21.692Z,1520531721.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:22.075Z,1520531722.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:22.090Z,1520531722.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:22.477Z,1520531722.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:22.493Z,1520531722.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:22.881Z,1520531722.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:22.897Z,1520531722.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:23.288Z,1520531723.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:23.303Z,1520531723.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:23.670Z,1520531723.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:23.685Z,1520531723.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:24.070Z,1520531724.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:24.097Z,1520531724.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:24.479Z,1520531724.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:24.494Z,1520531724.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:24.878Z,1520531724.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:24.893Z,1520531724.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:25.280Z,1520531725.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:25.295Z,1520531725.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:25.685Z,1520531725.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:25.700Z,1520531725.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:26.081Z,1520531726.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:26.097Z,1520531726.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:26.475Z,1520531726.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:26.490Z,1520531726.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:26.878Z,1520531726.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:26.893Z,1520531726.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:27.268Z,1520531727.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:27.298Z,1520531727.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:27.678Z,1520531727.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:27.699Z,1520531727.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:28.076Z,1520531728.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:28.091Z,1520531728.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:28.480Z,1520531728.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:28.496Z,1520531728.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:28.885Z,1520531728.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:28.901Z,1520531728.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:29.281Z,1520531729.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:29.302Z,1520531729.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:29.664Z,1520531729.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:29.688Z,1520531729.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:30.079Z,1520531730.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:30.094Z,1520531730.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:30.477Z,1520531730.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:30.492Z,1520531730.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:30.879Z,1520531730.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:30.899Z,1520531730.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:31.284Z,1520531731.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:31.300Z,1520531731.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:31.684Z,1520531731.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:31.699Z,1520531731.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:32.084Z,1520531732.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:32.100Z,1520531732.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:32.479Z,1520531732.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:32.499Z,1520531732.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:32.879Z,1520531732.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:32.894Z,1520531732.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:33.269Z,1520531733.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:33.289Z,1520531733.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:33.669Z,1520531733.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:33.697Z,1520531733.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:34.079Z,1520531734.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:34.094Z,1520531734.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:34.488Z,1520531734.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:34.504Z,1520531734.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:34.888Z,1520531734.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:34.903Z,1520531734.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:35.289Z,1520531735.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:35.304Z,1520531735.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:35.660Z,1520531735.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:35.695Z,1520531735.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:36.079Z,1520531736.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:36.099Z,1520531736.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:36.476Z,1520531736.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:36.491Z,1520531736.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:36.879Z,1520531736.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:36.899Z,1520531736.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:37.289Z,1520531737.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:37.305Z,1520531737.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:37.688Z,1520531737.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:37.703Z,1520531737.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:38.089Z,1520531738.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:38.104Z,1520531738.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:38.479Z,1520531738.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:38.494Z,1520531738.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:38.880Z,1520531738.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:38.894Z,1520531738.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:41.994Z,1520531741.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:42.030Z,1520531742.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:42.124Z,1520531742.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:42.158Z,1520531742.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:42.505Z,1520531742.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:42.537Z,1520531742.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:42.913Z,1520531742.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:42.939Z,1520531742.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:43.309Z,1520531743.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:43.335Z,1520531743.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:43.699Z,1520531743.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:43.713Z,1520531743.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:44.093Z,1520531744.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:44.108Z,1520531744.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:44.500Z,1520531744.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:44.515Z,1520531744.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:44.899Z,1520531744.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:44.913Z,1520531744.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:45.297Z,1520531745.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:45.313Z,1520531745.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:45.713Z,1520531745.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:45.738Z,1520531745.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:46.114Z,1520531746.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:46.140Z,1520531746.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:46.491Z,1520531746.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:46.507Z,1520531746.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:46.899Z,1520531746.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:46.918Z,1520531746.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:47.291Z,1520531747.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:47.306Z,1520531747.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:47.692Z,1520531747.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:47.708Z,1520531747.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:48.098Z,1520531748.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:48.119Z,1520531748.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:48.509Z,1520531748.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:48.524Z,1520531748.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:48.901Z,1520531748.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:48.917Z,1520531748.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:49.309Z,1520531749.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:49.341Z,1520531749.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:49.700Z,1520531749.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:49.715Z,1520531749.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:50.100Z,1520531750.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:50.115Z,1520531750.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:50.498Z,1520531750.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:50.513Z,1520531750.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:50.900Z,1520531750.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:50.915Z,1520531750.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:51.299Z,1520531751.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:51.315Z,1520531751.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:51.705Z,1520531751.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:51.721Z,1520531751.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:52.113Z,1520531752.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:52.148Z,1520531752.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:52.491Z,1520531752.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:52.512Z,1520531752.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:52.898Z,1520531752.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:52.914Z,1520531752.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:53.296Z,1520531753.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:53.318Z,1520531753.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:53.692Z,1520531753.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:53.716Z,1520531753.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:54.103Z,1520531754.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:54.118Z,1520531754.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:54.505Z,1520531754.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:54.521Z,1520531754.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:54.906Z,1520531754.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:54.921Z,1520531754.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:55.305Z,1520531755.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:55.321Z,1520531755.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:55.704Z,1520531755.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:55.719Z,1520531755.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:56.102Z,1520531756.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:56.118Z,1520531756.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:56.498Z,1520531756.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:56.527Z,1520531756.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:56.904Z,1520531756.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:56.919Z,1520531756.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:57.306Z,1520531757.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:57.335Z,1520531757.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:57.719Z,1520531757.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:57.735Z,1520531757.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:58.114Z,1520531758.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:58.129Z,1520531758.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:58.489Z,1520531758.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:58.517Z,1520531758.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:58.912Z,1520531758.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:58.928Z,1520531758.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:59.291Z,1520531759.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:59.320Z,1520531759.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:55:59.689Z,1520531759.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:55:59.728Z,1520531759.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:00.090Z,1520531760.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:00.122Z,1520531760.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:00.515Z,1520531760.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:00.530Z,1520531760.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:00.918Z,1520531760.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:00.933Z,1520531760.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:01.314Z,1520531761.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:01.331Z,1520531761.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:01.694Z,1520531761.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:01.723Z,1520531761.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:02.095Z,1520531762.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:02.121Z,1520531762.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:02.491Z,1520531762.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:02.519Z,1520531762.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:02.886Z,1520531762.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:02.924Z,1520531762.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:03.305Z,1520531763.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:03.335Z,1520531763.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:03.717Z,1520531763.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:03.733Z,1520531763.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:04.100Z,1520531764.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:04.132Z,1520531764.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:04.488Z,1520531764.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:04.519Z,1520531764.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:04.894Z,1520531764.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:04.927Z,1520531764.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:05.292Z,1520531765.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:05.332Z,1520531765.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:05.689Z,1520531765.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:05.727Z,1520531765.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:06.091Z,1520531766.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:06.126Z,1520531766.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:06.515Z,1520531766.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:06.530Z,1520531766.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:06.917Z,1520531766.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:06.933Z,1520531766.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:07.302Z,1520531767.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:07.339Z,1520531767.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:07.694Z,1520531767.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:07.736Z,1520531767.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:08.092Z,1520531768.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:08.107Z,1520531768.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:08.495Z,1520531768.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:08.535Z,1520531768.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:08.891Z,1520531768.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:08.906Z,1520531768.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:09.305Z,1520531769.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:09.337Z,1520531769.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:09.709Z,1520531769.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:09.732Z,1520531769.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:10.109Z,1520531770.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:10.135Z,1520531770.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:10.491Z,1520531770.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:10.507Z,1520531770.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:10.898Z,1520531770.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:10.935Z,1520531770.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:11.299Z,1520531771.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:11.318Z,1520531771.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:11.692Z,1520531771.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:11.707Z,1520531771.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:12.099Z,1520531772.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:12.119Z,1520531772.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:12.509Z,1520531772.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:12.524Z,1520531772.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:12.909Z,1520531772.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:12.940Z,1520531772.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:13.313Z,1520531773.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:13.347Z,1520531773.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:13.699Z,1520531773.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:13.714Z,1520531773.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:14.098Z,1520531774.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:14.115Z,1520531774.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:14.498Z,1520531774.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:14.513Z,1520531774.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:14.900Z,1520531774.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:14.922Z,1520531774.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:15.300Z,1520531775.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:15.323Z,1520531775.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:15.709Z,1520531775.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:15.724Z,1520531775.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:16.109Z,1520531776.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:16.150Z,1520531776.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:16.499Z,1520531776.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:16.514Z,1520531776.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:16.900Z,1520531776.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:16.915Z,1520531776.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:17.300Z,1520531777.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:17.315Z,1520531777.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:17.697Z,1520531777.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:17.713Z,1520531777.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:18.097Z,1520531778.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:18.113Z,1520531778.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:18.509Z,1520531778.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:18.525Z,1520531778.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:18.910Z,1520531778.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:18.925Z,1520531778.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:19.306Z,1520531779.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:19.321Z,1520531779.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:19.704Z,1520531779.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:19.719Z,1520531779.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:20.102Z,1520531780.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:20.117Z,1520531780.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:20.497Z,1520531780.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:20.519Z,1520531780.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:20.903Z,1520531780.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:20.919Z,1520531780.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:21.304Z,1520531781.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:21.323Z,1520531781.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:21.709Z,1520531781.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:21.724Z,1520531781.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:22.109Z,1520531782.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:22.125Z,1520531782.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:22.499Z,1520531782.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:22.523Z,1520531782.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:22.899Z,1520531782.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:22.919Z,1520531782.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:23.297Z,1520531783.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:23.319Z,1520531783.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:23.687Z,1520531783.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:23.727Z,1520531783.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:24.102Z,1520531784.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:24.123Z,1520531784.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:24.513Z,1520531784.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:24.535Z,1520531784.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:24.912Z,1520531784.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:24.935Z,1520531784.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:25.309Z,1520531785.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:25.330Z,1520531785.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:25.704Z,1520531785.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:25.721Z,1520531785.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:26.099Z,1520531786.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:26.119Z,1520531786.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:26.500Z,1520531786.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:26.516Z,1520531786.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:26.897Z,1520531786.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:26.918Z,1520531786.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:27.302Z,1520531787.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:27.325Z,1520531787.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:27.716Z,1520531787.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:27.740Z,1520531787.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:28.114Z,1520531788.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:28.135Z,1520531788.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:28.504Z,1520531788.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:28.523Z,1520531788.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:28.891Z,1520531788.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:28.923Z,1520531788.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:29.291Z,1520531789.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:29.319Z,1520531789.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:29.695Z,1520531789.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:29.722Z,1520531789.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:30.090Z,1520531790.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:30.123Z,1520531790.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:30.520Z,1520531790.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:30.536Z,1520531790.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:30.913Z,1520531790.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:30.943Z,1520531790.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:31.317Z,1520531791.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:31.332Z,1520531791.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:31.696Z,1520531791.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:31.720Z,1520531791.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:32.095Z,1520531792.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:32.135Z,1520531792.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:32.493Z,1520531792.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:32.508Z,1520531792.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:32.895Z,1520531792.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:32.911Z,1520531792.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:33.306Z,1520531793.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:33.338Z,1520531793.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:33.710Z,1520531793.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:33.743Z,1520531793.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:34.113Z,1520531794.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:34.140Z,1520531794.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:34.492Z,1520531794.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:34.512Z,1520531794.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:34.900Z,1520531794.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:34.916Z,1520531794.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:35.300Z,1520531795.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:35.316Z,1520531795.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:35.699Z,1520531795.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:35.719Z,1520531795.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:36.096Z,1520531796.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:36.112Z,1520531796.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:36.509Z,1520531796.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:36.540Z,1520531796.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:36.914Z,1520531796.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:36.949Z,1520531796.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:37.314Z,1520531797.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:37.350Z,1520531797.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:37.699Z,1520531797.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:37.715Z,1520531797.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:38.101Z,1520531798.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:38.116Z,1520531798.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:38.499Z,1520531798.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:38.514Z,1520531798.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:38.900Z,1520531798.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:38.915Z,1520531798.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:42.009Z,1520531802.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:42.025Z,1520531802.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:42.149Z,1520531802.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:42.183Z,1520531802.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:42.517Z,1520531802.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:42.533Z,1520531802.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:42.904Z,1520531802.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:42.930Z,1520531802.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:43.310Z,1520531803.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:43.325Z,1520531803.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:43.704Z,1520531803.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:43.719Z,1520531803.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:44.107Z,1520531804.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:44.122Z,1520531804.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:44.512Z,1520531804.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:44.535Z,1520531804.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:44.914Z,1520531804.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:44.929Z,1520531804.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:45.312Z,1520531805.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:45.335Z,1520531805.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:45.707Z,1520531805.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:45.722Z,1520531805.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:46.103Z,1520531806.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:46.118Z,1520531806.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:46.499Z,1520531806.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:46.523Z,1520531806.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:46.903Z,1520531806.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:46.919Z,1520531806.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:47.312Z,1520531807.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:47.328Z,1520531807.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:47.713Z,1520531807.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:47.735Z,1520531807.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:48.112Z,1520531808.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:48.135Z,1520531808.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:48.508Z,1520531808.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:48.523Z,1520531808.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:48.907Z,1520531808.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:48.923Z,1520531808.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:49.303Z,1520531809.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:49.323Z,1520531809.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:49.705Z,1520531809.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:49.720Z,1520531809.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:50.107Z,1520531810.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:50.122Z,1520531810.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:50.513Z,1520531810.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:50.535Z,1520531810.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:50.916Z,1520531810.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:50.931Z,1520531810.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:51.317Z,1520531811.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:51.332Z,1520531811.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:51.707Z,1520531811.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:51.723Z,1520531811.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:52.091Z,1520531812.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:52.117Z,1520531812.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:52.503Z,1520531812.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:52.522Z,1520531812.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:52.903Z,1520531812.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:52.923Z,1520531812.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:53.313Z,1520531813.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:53.329Z,1520531813.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:53.716Z,1520531813.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:53.739Z,1520531813.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:54.113Z,1520531814.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:54.135Z,1520531814.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:54.508Z,1520531814.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:54.523Z,1520531814.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:54.907Z,1520531814.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:54.923Z,1520531814.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:55.303Z,1520531815.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:55.323Z,1520531815.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:55.704Z,1520531815.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:55.719Z,1520531815.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:56.103Z,1520531816.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:56.123Z,1520531816.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:56.514Z,1520531816.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:56.535Z,1520531816.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:56.916Z,1520531816.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:56.931Z,1520531816.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:57.317Z,1520531817.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:57.332Z,1520531817.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:57.707Z,1520531817.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:57.722Z,1520531817.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:58.103Z,1520531818.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:58.119Z,1520531818.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:58.503Z,1520531818.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:58.520Z,1520531818.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:58.903Z,1520531818.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:58.923Z,1520531818.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:59.314Z,1520531819.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:59.330Z,1520531819.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:56:59.716Z,1520531819.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:56:59.731Z,1520531819.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:00.113Z,1520531820.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:00.135Z,1520531820.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:00.507Z,1520531820.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:00.522Z,1520531820.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:00.907Z,1520531820.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:00.923Z,1520531820.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:01.304Z,1520531821.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:01.319Z,1520531821.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:01.691Z,1520531821.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:01.726Z,1520531821.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:02.107Z,1520531822.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:02.123Z,1520531822.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:02.513Z,1520531822.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:02.535Z,1520531822.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:02.916Z,1520531822.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:02.931Z,1520531822.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:03.317Z,1520531823.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:03.333Z,1520531823.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:03.707Z,1520531823.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:03.723Z,1520531823.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:04.104Z,1520531824.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:04.119Z,1520531824.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:04.507Z,1520531824.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:04.523Z,1520531824.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:04.903Z,1520531824.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:04.923Z,1520531824.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:05.314Z,1520531825.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:05.330Z,1520531825.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:05.721Z,1520531825.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:05.737Z,1520531825.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:06.117Z,1520531826.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:06.139Z,1520531826.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:06.507Z,1520531826.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:06.522Z,1520531826.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:06.907Z,1520531826.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:06.923Z,1520531826.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:07.295Z,1520531827.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:07.327Z,1520531827.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:07.708Z,1520531827.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:07.723Z,1520531827.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:08.108Z,1520531828.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:08.130Z,1520531828.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:08.514Z,1520531828.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:08.535Z,1520531828.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:08.921Z,1520531828.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:08.937Z,1520531828.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:09.314Z,1520531829.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:09.335Z,1520531829.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:09.707Z,1520531829.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:09.723Z,1520531829.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:10.091Z,1520531830.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:10.125Z,1520531830.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:10.508Z,1520531830.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:10.523Z,1520531830.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:10.896Z,1520531830.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:10.936Z,1520531830.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:11.319Z,1520531831.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:11.334Z,1520531831.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:11.709Z,1520531831.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:11.730Z,1520531831.730 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:11.731Z,1520531831.731 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 204
2018-03-08T17:57:11.731Z,1520531831.731 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T17:57:11.733Z,1520531831.733 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:11.733Z,1520531831.733 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 204
2018-03-08T17:57:11.733Z,1520531831.733 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T17:57:11.735Z,1520531831.735 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:11.735Z,1520531831.735 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 204
2018-03-08T17:57:11.735Z,1520531831.735 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T17:57:11.747Z,1520531831.747 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T17:57:11.747Z,1520531831.747 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T17:57:11.747Z,1520531831.747 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T17:57:12.109Z,1520531832.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:12.161Z,1520531832.161 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T17:57:12.161Z,1520531832.161 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 204
2018-03-08T17:57:12.161Z,1520531832.161 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T17:57:12.162Z,1520531832.162 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 204
2018-03-08T17:57:12.162Z,1520531832.162 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T17:57:12.162Z,1520531832.162 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 204
2018-03-08T17:57:12.491Z,1520531832.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:12.522Z,1520531832.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T17:57:12.523Z,1520531832.523 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:57:12.523Z,1520531832.523 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:57:12.523Z,1520531832.523 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T17:57:12.524Z,1520531832.524 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:57:12.524Z,1520531832.524 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:57:12.533Z,1520531832.533 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T17:57:12.533Z,1520531832.533 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T17:57:12.534Z,1520531832.534 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T17:57:12.895Z,1520531832.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:12.911Z,1520531832.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T17:57:12.912Z,1520531832.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:13.296Z,1520531833.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:13.311Z,1520531833.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T17:57:13.313Z,1520531833.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:13.700Z,1520531833.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:13.715Z,1520531833.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T17:57:13.716Z,1520531833.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:14.092Z,1520531834.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:14.107Z,1520531834.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T17:57:14.108Z,1520531834.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:14.513Z,1520531834.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:14.539Z,1520531834.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T17:57:14.540Z,1520531834.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:14.914Z,1520531834.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:14.940Z,1520531834.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T17:57:14.941Z,1520531834.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:15.310Z,1520531835.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:15.345Z,1520531835.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T17:57:15.346Z,1520531835.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:15.700Z,1520531835.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:15.715Z,1520531835.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T17:57:15.716Z,1520531835.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:16.102Z,1520531836.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:16.117Z,1520531836.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T17:57:16.118Z,1520531836.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:16.504Z,1520531836.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:16.543Z,1520531836.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T17:57:16.544Z,1520531836.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:16.904Z,1520531836.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:16.919Z,1520531836.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T17:57:16.920Z,1520531836.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:17.309Z,1520531837.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:17.324Z,1520531837.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T17:57:17.325Z,1520531837.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:17.706Z,1520531837.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:17.721Z,1520531837.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T17:57:17.722Z,1520531837.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:18.105Z,1520531838.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:18.120Z,1520531838.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T17:57:18.121Z,1520531838.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:18.504Z,1520531838.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:18.518Z,1520531838.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T17:57:18.519Z,1520531838.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:18.903Z,1520531838.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:18.926Z,1520531838.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T17:57:18.927Z,1520531838.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:19.304Z,1520531839.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:19.319Z,1520531839.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T17:57:19.319Z,1520531839.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:19.703Z,1520531839.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:19.719Z,1520531839.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T17:57:19.719Z,1520531839.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:20.102Z,1520531840.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:20.117Z,1520531840.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T17:57:20.117Z,1520531840.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:20.517Z,1520531840.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:20.532Z,1520531840.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T17:57:20.553Z,1520531840.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:20.913Z,1520531840.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:20.927Z,1520531840.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T17:57:20.928Z,1520531840.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:21.308Z,1520531841.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:21.323Z,1520531841.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T17:57:21.324Z,1520531841.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:21.706Z,1520531841.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:21.720Z,1520531841.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T17:57:21.721Z,1520531841.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:22.106Z,1520531842.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:22.120Z,1520531842.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T17:57:22.121Z,1520531842.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:22.507Z,1520531842.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:22.522Z,1520531842.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T17:57:22.523Z,1520531842.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:22.905Z,1520531842.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:22.920Z,1520531842.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T17:57:22.921Z,1520531842.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:23.309Z,1520531843.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:23.323Z,1520531843.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T17:57:23.324Z,1520531843.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:23.708Z,1520531843.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:23.722Z,1520531843.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T17:57:23.723Z,1520531843.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:24.109Z,1520531844.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:24.124Z,1520531844.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T17:57:24.125Z,1520531844.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:24.503Z,1520531844.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:24.519Z,1520531844.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T17:57:24.520Z,1520531844.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:24.899Z,1520531844.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:24.914Z,1520531844.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T17:57:24.915Z,1520531844.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:25.306Z,1520531845.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:25.326Z,1520531845.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T17:57:25.327Z,1520531845.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:25.707Z,1520531845.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:25.722Z,1520531845.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T17:57:25.723Z,1520531845.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:26.100Z,1520531846.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:26.115Z,1520531846.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T17:57:26.116Z,1520531846.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:26.509Z,1520531846.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:26.524Z,1520531846.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T17:57:26.525Z,1520531846.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:26.913Z,1520531846.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:26.927Z,1520531846.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T17:57:26.928Z,1520531846.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:27.309Z,1520531847.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:27.323Z,1520531847.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T17:57:27.325Z,1520531847.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:27.706Z,1520531847.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:27.721Z,1520531847.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T17:57:27.722Z,1520531847.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:28.100Z,1520531848.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:28.114Z,1520531848.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T17:57:28.115Z,1520531848.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:28.507Z,1520531848.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:28.526Z,1520531848.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T17:57:28.527Z,1520531848.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:28.903Z,1520531848.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:28.918Z,1520531848.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T17:57:28.919Z,1520531848.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:29.310Z,1520531849.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:29.324Z,1520531849.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T17:57:29.325Z,1520531849.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:29.713Z,1520531849.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:29.727Z,1520531849.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T17:57:29.728Z,1520531849.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:30.112Z,1520531850.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:30.127Z,1520531850.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T17:57:30.128Z,1520531850.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:30.503Z,1520531850.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:30.518Z,1520531850.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T17:57:30.519Z,1520531850.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:30.907Z,1520531850.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:30.921Z,1520531850.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T17:57:30.922Z,1520531850.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:31.307Z,1520531851.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:31.322Z,1520531851.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T17:57:31.323Z,1520531851.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:31.704Z,1520531851.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:31.719Z,1520531851.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T17:57:31.719Z,1520531851.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:32.108Z,1520531852.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:32.123Z,1520531852.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:32.512Z,1520531852.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:32.527Z,1520531852.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:32.913Z,1520531852.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:32.928Z,1520531852.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:33.312Z,1520531853.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:33.327Z,1520531853.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:33.706Z,1520531853.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:33.722Z,1520531853.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:34.103Z,1520531854.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:34.119Z,1520531854.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:34.499Z,1520531854.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:34.515Z,1520531854.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:34.907Z,1520531854.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:34.927Z,1520531854.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:35.312Z,1520531855.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:35.327Z,1520531855.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:35.712Z,1520531855.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:35.728Z,1520531855.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:36.112Z,1520531856.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:36.136Z,1520531856.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:36.503Z,1520531856.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:36.518Z,1520531856.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:36.908Z,1520531856.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:36.931Z,1520531856.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:37.303Z,1520531857.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:37.322Z,1520531857.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:37.701Z,1520531857.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:37.728Z,1520531857.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:38.107Z,1520531858.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:38.126Z,1520531858.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:38.516Z,1520531858.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:38.532Z,1520531858.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:38.917Z,1520531858.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:38.932Z,1520531858.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:42.014Z,1520531862.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:42.034Z,1520531862.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:42.129Z,1520531862.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:42.167Z,1520531862.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:42.524Z,1520531862.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:42.540Z,1520531862.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:42.923Z,1520531862.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:42.940Z,1520531862.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:43.325Z,1520531863.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:43.341Z,1520531863.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:43.724Z,1520531863.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:43.739Z,1520531863.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:44.123Z,1520531864.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:44.140Z,1520531864.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:44.529Z,1520531864.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:44.550Z,1520531864.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:44.929Z,1520531864.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:44.950Z,1520531864.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:45.317Z,1520531865.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:45.333Z,1520531865.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:45.721Z,1520531865.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:45.738Z,1520531865.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:46.129Z,1520531866.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:46.150Z,1520531866.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:46.521Z,1520531866.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:46.537Z,1520531866.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:46.927Z,1520531866.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:46.959Z,1520531866.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:47.328Z,1520531867.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:47.344Z,1520531867.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:47.712Z,1520531867.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:47.743Z,1520531867.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:48.132Z,1520531868.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:48.148Z,1520531868.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:48.534Z,1520531868.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:48.549Z,1520531868.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:48.938Z,1520531868.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:48.953Z,1520531868.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:49.330Z,1520531869.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:49.346Z,1520531869.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:49.711Z,1520531869.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:49.738Z,1520531869.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:50.138Z,1520531870.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:50.159Z,1520531870.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:50.541Z,1520531870.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:50.563Z,1520531870.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:50.935Z,1520531870.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:50.965Z,1520531870.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:51.317Z,1520531871.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:51.348Z,1520531871.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:51.719Z,1520531871.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:51.747Z,1520531871.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:52.137Z,1520531872.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:52.159Z,1520531872.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:52.529Z,1520531872.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:52.559Z,1520531872.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:52.937Z,1520531872.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:52.958Z,1520531872.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:53.316Z,1520531873.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:53.353Z,1520531873.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:53.713Z,1520531873.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:53.745Z,1520531873.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:54.126Z,1520531874.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:54.164Z,1520531874.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:54.545Z,1520531874.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:54.561Z,1520531874.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:54.926Z,1520531874.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:54.954Z,1520531874.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:55.316Z,1520531875.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:55.361Z,1520531875.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:55.714Z,1520531875.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:55.730Z,1520531875.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:56.130Z,1520531876.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:56.163Z,1520531876.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:56.531Z,1520531876.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:56.567Z,1520531876.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:56.931Z,1520531876.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:56.958Z,1520531876.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:57.330Z,1520531877.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:57.365Z,1520531877.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:57.721Z,1520531877.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:57.737Z,1520531877.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:58.163Z,1520531878.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:58.201Z,1520531878.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:58.529Z,1520531878.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:58.551Z,1520531878.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:58.929Z,1520531878.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:58.945Z,1520531878.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:59.327Z,1520531879.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:59.343Z,1520531879.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:57:59.722Z,1520531879.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:57:59.739Z,1520531879.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:00.152Z,1520531880.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:00.198Z,1520531880.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:00.545Z,1520531880.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:00.590Z,1520531880.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:00.934Z,1520531880.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:00.950Z,1520531880.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:01.315Z,1520531881.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:01.341Z,1520531881.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:01.716Z,1520531881.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:01.743Z,1520531881.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:02.111Z,1520531882.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:02.139Z,1520531882.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:02.534Z,1520531882.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:02.549Z,1520531882.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:02.940Z,1520531882.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:02.985Z,1520531882.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:03.334Z,1520531883.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:03.355Z,1520531883.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:03.726Z,1520531883.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:03.746Z,1520531883.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:04.115Z,1520531884.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:04.142Z,1520531884.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:04.511Z,1520531884.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:04.539Z,1520531884.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:04.921Z,1520531884.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:04.947Z,1520531884.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:05.338Z,1520531885.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:05.354Z,1520531885.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:05.729Z,1520531885.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:05.761Z,1520531885.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:06.137Z,1520531886.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:06.153Z,1520531886.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:06.515Z,1520531886.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:06.547Z,1520531886.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:06.928Z,1520531886.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:06.951Z,1520531886.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:07.315Z,1520531887.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:07.351Z,1520531887.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:07.718Z,1520531887.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:07.746Z,1520531887.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:08.138Z,1520531888.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:08.153Z,1520531888.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:08.537Z,1520531888.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:08.558Z,1520531888.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:08.943Z,1520531888.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:08.962Z,1520531888.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:09.312Z,1520531889.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:09.340Z,1520531889.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:09.719Z,1520531889.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:09.752Z,1520531889.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:10.114Z,1520531890.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:10.152Z,1520531890.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:10.521Z,1520531890.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:10.549Z,1520531890.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:10.939Z,1520531890.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:10.955Z,1520531890.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:11.339Z,1520531891.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:11.354Z,1520531891.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:11.713Z,1520531891.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:11.728Z,1520531891.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:12.118Z,1520531892.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:12.150Z,1520531892.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:12.523Z,1520531892.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:12.562Z,1520531892.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:12.919Z,1520531892.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:12.959Z,1520531892.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:13.334Z,1520531893.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:13.369Z,1520531893.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:13.739Z,1520531893.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:13.768Z,1520531893.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:14.121Z,1520531894.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:14.137Z,1520531894.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:14.519Z,1520531894.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:14.547Z,1520531894.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:14.924Z,1520531894.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:14.940Z,1520531894.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:15.324Z,1520531895.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:15.340Z,1520531895.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:15.722Z,1520531895.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:15.737Z,1520531895.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:16.138Z,1520531896.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:16.173Z,1520531896.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:16.524Z,1520531896.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:16.546Z,1520531896.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:16.938Z,1520531896.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:16.969Z,1520531896.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:17.325Z,1520531897.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:17.340Z,1520531897.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:17.716Z,1520531897.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:17.747Z,1520531897.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:18.132Z,1520531898.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:18.155Z,1520531898.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:18.535Z,1520531898.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:18.555Z,1520531898.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:18.937Z,1520531898.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:18.952Z,1520531898.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:19.328Z,1520531899.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:19.344Z,1520531899.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:19.721Z,1520531899.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:19.757Z,1520531899.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:20.137Z,1520531900.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:20.159Z,1520531900.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:20.537Z,1520531900.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:20.552Z,1520531900.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:20.938Z,1520531900.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:20.953Z,1520531900.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:21.319Z,1520531901.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:21.335Z,1520531901.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:21.715Z,1520531901.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:21.735Z,1520531901.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:22.129Z,1520531902.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:22.150Z,1520531902.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:22.529Z,1520531902.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:22.550Z,1520531902.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:22.929Z,1520531902.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:22.950Z,1520531902.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:23.321Z,1520531903.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:23.337Z,1520531903.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:23.719Z,1520531903.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:23.739Z,1520531903.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:24.129Z,1520531904.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:24.216Z,1520531904.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:24.529Z,1520531904.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:24.550Z,1520531904.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:24.929Z,1520531904.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:24.950Z,1520531904.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:25.315Z,1520531905.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:25.331Z,1520531905.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:25.716Z,1520531905.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:25.731Z,1520531905.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:26.126Z,1520531906.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:26.147Z,1520531906.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:26.530Z,1520531906.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:26.551Z,1520531906.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:26.934Z,1520531906.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:26.967Z,1520531906.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:27.323Z,1520531907.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:27.352Z,1520531907.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:27.715Z,1520531907.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:27.751Z,1520531907.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:28.140Z,1520531908.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:28.156Z,1520531908.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:28.540Z,1520531908.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:28.555Z,1520531908.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:28.926Z,1520531908.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:28.961Z,1520531908.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:29.315Z,1520531909.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:29.351Z,1520531909.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:29.719Z,1520531909.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:29.758Z,1520531909.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:30.127Z,1520531910.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:30.163Z,1520531910.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:30.534Z,1520531910.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:30.562Z,1520531910.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:30.934Z,1520531910.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:30.958Z,1520531910.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:31.324Z,1520531911.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:31.360Z,1520531911.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:31.723Z,1520531911.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:31.738Z,1520531911.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:32.130Z,1520531912.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:32.167Z,1520531912.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:32.542Z,1520531912.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:32.574Z,1520531912.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:32.938Z,1520531912.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:32.970Z,1520531912.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:33.324Z,1520531913.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:33.341Z,1520531913.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:33.722Z,1520531913.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:33.738Z,1520531913.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:34.125Z,1520531914.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:34.141Z,1520531914.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:34.538Z,1520531914.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:34.569Z,1520531914.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:34.930Z,1520531914.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:34.947Z,1520531914.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:35.323Z,1520531915.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:35.339Z,1520531915.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:35.727Z,1520531915.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:35.743Z,1520531915.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:36.132Z,1520531916.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:36.148Z,1520531916.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:36.533Z,1520531916.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:36.548Z,1520531916.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:36.934Z,1520531916.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:36.949Z,1520531916.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:37.323Z,1520531917.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:37.346Z,1520531917.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:37.728Z,1520531917.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:37.743Z,1520531917.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:38.132Z,1520531918.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:38.148Z,1520531918.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:38.537Z,1520531918.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:38.559Z,1520531918.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:38.941Z,1520531918.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:38.959Z,1520531918.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:42.027Z,1520531922.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:42.043Z,1520531922.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:42.138Z,1520531922.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:42.186Z,1520531922.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:42.513Z,1520531922.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:42.536Z,1520531922.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:42.909Z,1520531922.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:42.942Z,1520531922.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:43.309Z,1520531923.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:43.345Z,1520531923.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:43.700Z,1520531923.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:43.715Z,1520531923.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:44.099Z,1520531924.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:44.114Z,1520531924.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:44.494Z,1520531924.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:44.527Z,1520531924.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:44.902Z,1520531924.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:44.917Z,1520531924.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:45.309Z,1520531925.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:45.324Z,1520531925.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:45.704Z,1520531925.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:45.720Z,1520531925.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:46.105Z,1520531926.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:46.121Z,1520531926.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:46.503Z,1520531926.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:46.518Z,1520531926.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:46.902Z,1520531926.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:46.917Z,1520531926.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:47.297Z,1520531927.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:47.325Z,1520531927.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:47.701Z,1520531927.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:47.715Z,1520531927.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:48.103Z,1520531928.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:48.118Z,1520531928.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:48.508Z,1520531928.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:48.523Z,1520531928.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:48.909Z,1520531928.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:48.930Z,1520531928.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:49.306Z,1520531929.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:49.326Z,1520531929.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:49.699Z,1520531929.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:49.714Z,1520531929.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:50.097Z,1520531930.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:50.118Z,1520531930.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:50.504Z,1520531930.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:50.519Z,1520531930.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:50.902Z,1520531930.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:50.922Z,1520531930.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:51.310Z,1520531931.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:51.331Z,1520531931.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:51.704Z,1520531931.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:51.735Z,1520531931.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:52.113Z,1520531932.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:52.128Z,1520531932.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:52.504Z,1520531932.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:52.519Z,1520531932.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:52.899Z,1520531932.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:52.918Z,1520531932.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:53.299Z,1520531933.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:53.318Z,1520531933.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:53.699Z,1520531933.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:53.719Z,1520531933.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:54.100Z,1520531934.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:54.115Z,1520531934.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:54.509Z,1520531934.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:54.525Z,1520531934.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:54.913Z,1520531934.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:54.935Z,1520531934.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:55.309Z,1520531935.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:55.330Z,1520531935.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:55.702Z,1520531935.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:55.718Z,1520531935.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:56.097Z,1520531936.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:56.118Z,1520531936.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:56.504Z,1520531936.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:56.519Z,1520531936.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:56.903Z,1520531936.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:56.926Z,1520531936.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:57.317Z,1520531937.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:57.332Z,1520531937.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:57.716Z,1520531937.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:57.739Z,1520531937.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:58.101Z,1520531938.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:58.129Z,1520531938.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:58.491Z,1520531938.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:58.506Z,1520531938.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:58.895Z,1520531938.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:58.935Z,1520531938.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:59.294Z,1520531939.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:59.331Z,1520531939.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:58:59.700Z,1520531939.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:58:59.715Z,1520531939.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:00.095Z,1520531940.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:00.114Z,1520531940.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:00.513Z,1520531940.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:00.544Z,1520531940.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:00.910Z,1520531940.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:00.942Z,1520531940.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:01.305Z,1520531941.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:01.321Z,1520531941.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:01.701Z,1520531941.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:01.717Z,1520531941.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:02.099Z,1520531942.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:02.114Z,1520531942.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:02.501Z,1520531942.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:02.516Z,1520531942.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:02.899Z,1520531942.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:02.915Z,1520531942.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:03.309Z,1520531943.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:03.341Z,1520531943.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:03.713Z,1520531943.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:03.728Z,1520531943.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:04.106Z,1520531944.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:04.126Z,1520531944.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:04.505Z,1520531944.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:04.520Z,1520531944.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:04.904Z,1520531944.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:04.919Z,1520531944.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:05.300Z,1520531945.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:05.323Z,1520531945.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:05.702Z,1520531945.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:05.718Z,1520531945.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:06.099Z,1520531946.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:06.115Z,1520531946.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:06.510Z,1520531946.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:06.525Z,1520531946.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:06.909Z,1520531946.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:06.925Z,1520531946.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:07.308Z,1520531947.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:07.324Z,1520531947.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:07.704Z,1520531947.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:07.720Z,1520531947.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:08.100Z,1520531948.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:08.115Z,1520531948.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:08.506Z,1520531948.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:08.521Z,1520531948.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:08.899Z,1520531948.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:08.915Z,1520531948.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:09.274Z,1520531949.274 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T17:59:09.274Z,1520531949.274 [NAL9602] Data Fault, FailCount= 2
2018-03-08T17:59:09.274Z,1520531949.274 [NAL9602](ERROR): Data Fault
2018-03-08T17:59:09.307Z,1520531949.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:09.342Z,1520531949.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:09.361Z,1520531949.361 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T17:59:09.678Z,1520531949.678 [NAL9602](INFO): Powering down
2018-03-08T17:59:09.710Z,1520531949.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:09.726Z,1520531949.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:10.103Z,1520531950.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:10.117Z,1520531950.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:10.503Z,1520531950.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:10.519Z,1520531950.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:10.531Z,1520531950.531 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T17:59:10.531Z,1520531950.531 [NAL9602] No Fault, FailCount= 2
2018-03-08T17:59:10.902Z,1520531950.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:10.918Z,1520531950.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:11.298Z,1520531951.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:11.314Z,1520531951.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:11.688Z,1520531951.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:11.722Z,1520531951.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:12.102Z,1520531952.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:12.118Z,1520531952.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:12.502Z,1520531952.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:12.518Z,1520531952.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:12.902Z,1520531952.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:12.917Z,1520531952.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:13.302Z,1520531953.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:13.318Z,1520531953.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:13.697Z,1520531953.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:13.720Z,1520531953.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:14.098Z,1520531954.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:14.113Z,1520531954.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:14.501Z,1520531954.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:14.517Z,1520531954.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:14.890Z,1520531954.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:14.924Z,1520531954.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:15.288Z,1520531955.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:15.314Z,1520531955.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:15.702Z,1520531955.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:15.717Z,1520531955.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:16.090Z,1520531956.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:16.115Z,1520531956.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:16.487Z,1520531956.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:16.513Z,1520531956.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:16.902Z,1520531956.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:16.918Z,1520531956.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:17.290Z,1520531957.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:17.322Z,1520531957.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:17.687Z,1520531957.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:17.713Z,1520531957.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:18.102Z,1520531958.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:18.118Z,1520531958.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:18.490Z,1520531958.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:18.516Z,1520531958.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:18.902Z,1520531958.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:18.917Z,1520531958.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:19.302Z,1520531959.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:19.317Z,1520531959.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:19.690Z,1520531959.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:19.716Z,1520531959.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:20.103Z,1520531960.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:20.118Z,1520531960.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:20.502Z,1520531960.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:20.517Z,1520531960.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:20.890Z,1520531960.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:20.915Z,1520531960.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:21.284Z,1520531961.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:21.318Z,1520531961.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:21.690Z,1520531961.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:21.717Z,1520531961.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:22.090Z,1520531962.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:22.116Z,1520531962.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:22.502Z,1520531962.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:22.517Z,1520531962.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:22.888Z,1520531962.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:22.920Z,1520531962.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:23.294Z,1520531963.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:23.319Z,1520531963.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:23.688Z,1520531963.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:23.718Z,1520531963.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:24.094Z,1520531964.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:24.126Z,1520531964.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:24.494Z,1520531964.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:24.526Z,1520531964.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:24.895Z,1520531964.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:24.926Z,1520531964.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:25.294Z,1520531965.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:25.326Z,1520531965.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:25.694Z,1520531965.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:25.726Z,1520531965.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:26.094Z,1520531966.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:26.126Z,1520531966.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:26.494Z,1520531966.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:26.526Z,1520531966.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:26.890Z,1520531966.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:26.927Z,1520531966.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:27.287Z,1520531967.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:27.302Z,1520531967.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:27.694Z,1520531967.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:27.730Z,1520531967.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:28.094Z,1520531968.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:28.130Z,1520531968.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:28.487Z,1520531968.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:28.502Z,1520531968.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:28.891Z,1520531968.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:28.907Z,1520531968.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:29.294Z,1520531969.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:29.337Z,1520531969.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:29.685Z,1520531969.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:29.700Z,1520531969.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:30.094Z,1520531970.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:30.131Z,1520531970.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:30.498Z,1520531970.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:30.539Z,1520531970.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:30.894Z,1520531970.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:30.909Z,1520531970.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:31.298Z,1520531971.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:31.335Z,1520531971.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:31.698Z,1520531971.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:31.718Z,1520531971.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:32.099Z,1520531972.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:32.114Z,1520531972.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:32.500Z,1520531972.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:32.515Z,1520531972.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:32.899Z,1520531972.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:32.915Z,1520531972.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:33.294Z,1520531973.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:33.309Z,1520531973.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:33.699Z,1520531973.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:33.715Z,1520531973.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:34.099Z,1520531974.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:34.118Z,1520531974.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:34.498Z,1520531974.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:34.513Z,1520531974.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:34.899Z,1520531974.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:34.922Z,1520531974.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:35.299Z,1520531975.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:35.315Z,1520531975.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:35.695Z,1520531975.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:35.710Z,1520531975.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:36.096Z,1520531976.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:36.119Z,1520531976.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:36.500Z,1520531976.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:36.516Z,1520531976.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:36.899Z,1520531976.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:36.914Z,1520531976.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:37.300Z,1520531977.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:37.315Z,1520531977.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:37.699Z,1520531977.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:37.718Z,1520531977.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:38.098Z,1520531978.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:38.118Z,1520531978.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:38.499Z,1520531978.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:38.515Z,1520531978.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:38.899Z,1520531978.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:38.914Z,1520531978.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:38.917Z,1520531978.917 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T17:59:38.917Z,1520531978.917 [Default:CheckIn:C.Wait] Stopped
2018-03-08T17:59:38.917Z,1520531978.917 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T17:59:38.917Z,1520531978.917 [Default:CheckIn:D] Running Loop=1
2018-03-08T17:59:39.302Z,1520531979.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:39.317Z,1520531979.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:39.320Z,1520531979.320 [Default:CheckIn:D] Stopped
2018-03-08T17:59:39.320Z,1520531979.320 [Default:CheckIn:E] Running Loop=1
2018-03-08T17:59:42.387Z,1520531982.387 [NAL9602](INFO): Powering up NAL9602
2018-03-08T17:59:42.404Z,1520531982.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:42.420Z,1520531982.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:42.423Z,1520531982.423 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 613.908594 min 
2018-03-08T17:59:42.423Z,1520531982.423 [Default:CheckIn:E] Stopped
2018-03-08T17:59:42.423Z,1520531982.423 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T17:59:42.423Z,1520531982.423 [Default:CheckIn] Stopped
2018-03-08T17:59:42.424Z,1520531982.424 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T17:59:42.424Z,1520531982.424 [Default:CheckIn](INFO): Running loop #60
2018-03-08T17:59:42.424Z,1520531982.424 [Default:CheckIn] Running Loop=60
2018-03-08T17:59:42.424Z,1520531982.424 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T17:59:42.424Z,1520531982.424 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T17:59:42.516Z,1520531982.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:42.555Z,1520531982.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:42.905Z,1520531982.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:42.919Z,1520531982.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:43.293Z,1520531983.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:43.318Z,1520531983.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:43.708Z,1520531983.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:43.731Z,1520531983.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:44.125Z,1520531984.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:44.171Z,1520531984.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:44.496Z,1520531984.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:44.528Z,1520531984.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:44.893Z,1520531984.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:44.931Z,1520531984.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:45.292Z,1520531985.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:45.349Z,1520531985.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:45.705Z,1520531985.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:45.749Z,1520531985.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:46.104Z,1520531986.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:46.142Z,1520531986.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:46.498Z,1520531986.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:46.513Z,1520531986.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:46.898Z,1520531986.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:46.914Z,1520531986.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:47.302Z,1520531987.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:47.360Z,1520531987.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:47.697Z,1520531987.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:47.722Z,1520531987.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:48.086Z,1520531988.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:48.117Z,1520531988.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:48.499Z,1520531988.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:48.519Z,1520531988.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:48.902Z,1520531988.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:48.917Z,1520531988.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:49.288Z,1520531989.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:49.322Z,1520531989.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:49.702Z,1520531989.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:49.722Z,1520531989.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:50.086Z,1520531990.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:50.126Z,1520531990.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:50.488Z,1520531990.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:50.515Z,1520531990.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:50.903Z,1520531990.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:50.919Z,1520531990.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:51.302Z,1520531991.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:51.317Z,1520531991.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:51.684Z,1520531991.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:51.707Z,1520531991.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:52.095Z,1520531992.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:52.121Z,1520531992.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:52.486Z,1520531992.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:52.522Z,1520531992.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:52.918Z,1520531992.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:52.934Z,1520531992.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:53.278Z,1520531993.278 [NAL9602](INFO): NAL9602 initialized
2018-03-08T17:59:53.295Z,1520531993.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:53.326Z,1520531993.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:53.695Z,1520531993.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:53.722Z,1520531993.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:54.117Z,1520531994.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:54.132Z,1520531994.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:54.513Z,1520531994.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:54.528Z,1520531994.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:54.908Z,1520531994.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:54.923Z,1520531994.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:55.291Z,1520531995.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:55.317Z,1520531995.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:55.692Z,1520531995.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:55.731Z,1520531995.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:56.095Z,1520531996.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:56.121Z,1520531996.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:56.510Z,1520531996.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:56.525Z,1520531996.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:56.913Z,1520531996.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:56.928Z,1520531996.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:57.309Z,1520531997.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:57.324Z,1520531997.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:57.688Z,1520531997.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:57.724Z,1520531997.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:58.091Z,1520531998.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:58.122Z,1520531998.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:58.494Z,1520531998.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:58.521Z,1520531998.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:58.895Z,1520531998.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:58.922Z,1520531998.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:59.310Z,1520531999.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:59.324Z,1520531999.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T17:59:59.710Z,1520531999.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T17:59:59.724Z,1520531999.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:00.101Z,1520532000.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:00.123Z,1520532000.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:00.492Z,1520532000.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:00.519Z,1520532000.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:00.895Z,1520532000.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:00.921Z,1520532000.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:01.287Z,1520532001.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:01.322Z,1520532001.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:01.692Z,1520532001.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:01.722Z,1520532001.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:02.091Z,1520532002.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:02.127Z,1520532002.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:02.518Z,1520532002.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:02.539Z,1520532002.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:02.918Z,1520532002.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:02.933Z,1520532002.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:03.314Z,1520532003.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:03.329Z,1520532003.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:03.684Z,1520532003.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:03.699Z,1520532003.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:04.095Z,1520532004.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:04.126Z,1520532004.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:04.495Z,1520532004.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:04.526Z,1520532004.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:04.895Z,1520532004.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:04.926Z,1520532004.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:05.317Z,1520532005.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:05.333Z,1520532005.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:05.714Z,1520532005.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:05.729Z,1520532005.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:06.117Z,1520532006.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:06.133Z,1520532006.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:06.491Z,1520532006.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:06.522Z,1520532006.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:06.895Z,1520532006.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:06.934Z,1520532006.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:07.285Z,1520532007.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:07.300Z,1520532007.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:07.697Z,1520532007.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:07.712Z,1520532007.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:08.095Z,1520532008.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:08.109Z,1520532008.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:08.509Z,1520532008.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:08.534Z,1520532008.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:08.909Z,1520532008.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:08.932Z,1520532008.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:09.308Z,1520532009.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:09.336Z,1520532009.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:09.691Z,1520532009.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:09.707Z,1520532009.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:10.099Z,1520532010.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:10.114Z,1520532010.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:10.499Z,1520532010.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:10.514Z,1520532010.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:10.892Z,1520532010.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:10.907Z,1520532010.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:11.313Z,1520532011.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:11.338Z,1520532011.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:11.709Z,1520532011.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:11.736Z,1520532011.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:12.106Z,1520532012.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:12.141Z,1520532012.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:12.496Z,1520532012.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:12.511Z,1520532012.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:12.896Z,1520532012.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:12.911Z,1520532012.911 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:12.911Z,1520532012.911 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 205
2018-03-08T18:00:12.911Z,1520532012.911 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T18:00:12.913Z,1520532012.913 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:12.913Z,1520532012.913 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 205
2018-03-08T18:00:12.913Z,1520532012.913 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T18:00:12.914Z,1520532012.914 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:12.915Z,1520532012.915 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 205
2018-03-08T18:00:12.915Z,1520532012.915 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T18:00:12.954Z,1520532012.954 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T18:00:12.954Z,1520532012.954 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T18:00:12.955Z,1520532012.955 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T18:00:13.291Z,1520532013.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:13.345Z,1520532013.345 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T18:00:13.345Z,1520532013.345 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 205
2018-03-08T18:00:13.346Z,1520532013.346 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T18:00:13.346Z,1520532013.346 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 205
2018-03-08T18:00:13.346Z,1520532013.346 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T18:00:13.347Z,1520532013.347 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 205
2018-03-08T18:00:13.692Z,1520532013.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:13.718Z,1520532013.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T18:00:13.718Z,1520532013.718 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:00:13.719Z,1520532013.719 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:00:13.719Z,1520532013.719 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T18:00:13.719Z,1520532013.719 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:00:13.720Z,1520532013.720 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:00:13.720Z,1520532013.720 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T18:00:13.725Z,1520532013.725 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:00:13.725Z,1520532013.725 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:00:14.091Z,1520532014.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:14.126Z,1520532014.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T18:00:14.127Z,1520532014.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:14.497Z,1520532014.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:14.532Z,1520532014.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T18:00:14.533Z,1520532014.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:14.909Z,1520532014.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:14.932Z,1520532014.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T18:00:14.934Z,1520532014.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:15.314Z,1520532015.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:15.334Z,1520532015.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T18:00:15.335Z,1520532015.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:15.688Z,1520532015.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:15.703Z,1520532015.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T18:00:15.704Z,1520532015.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:16.091Z,1520532016.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:16.126Z,1520532016.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T18:00:16.127Z,1520532016.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:16.504Z,1520532016.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:16.533Z,1520532016.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T18:00:16.534Z,1520532016.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:16.892Z,1520532016.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:16.911Z,1520532016.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T18:00:16.911Z,1520532016.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:17.305Z,1520532017.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:17.326Z,1520532017.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T18:00:17.327Z,1520532017.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:17.706Z,1520532017.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:17.726Z,1520532017.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T18:00:17.727Z,1520532017.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:18.106Z,1520532018.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:18.121Z,1520532018.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T18:00:18.122Z,1520532018.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:18.508Z,1520532018.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:18.523Z,1520532018.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T18:00:18.524Z,1520532018.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:18.903Z,1520532018.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:18.917Z,1520532018.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T18:00:18.918Z,1520532018.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:19.299Z,1520532019.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:19.314Z,1520532019.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T18:00:19.315Z,1520532019.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:19.705Z,1520532019.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:19.726Z,1520532019.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T18:00:19.727Z,1520532019.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:20.092Z,1520532020.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:20.118Z,1520532020.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T18:00:20.119Z,1520532020.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:20.511Z,1520532020.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:20.526Z,1520532020.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T18:00:20.527Z,1520532020.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:20.909Z,1520532020.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:20.931Z,1520532020.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T18:00:20.932Z,1520532020.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:21.321Z,1520532021.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:21.336Z,1520532021.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T18:00:21.337Z,1520532021.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:21.688Z,1520532021.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:21.721Z,1520532021.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T18:00:21.722Z,1520532021.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:22.095Z,1520532022.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:22.123Z,1520532022.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T18:00:22.124Z,1520532022.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:22.492Z,1520532022.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:22.522Z,1520532022.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T18:00:22.523Z,1520532022.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:22.888Z,1520532022.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:22.919Z,1520532022.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T18:00:22.920Z,1520532022.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:23.314Z,1520532023.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:23.335Z,1520532023.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T18:00:23.336Z,1520532023.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:23.701Z,1520532023.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:23.729Z,1520532023.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T18:00:23.730Z,1520532023.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:24.114Z,1520532024.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:24.130Z,1520532024.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T18:00:24.131Z,1520532024.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:24.491Z,1520532024.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:24.522Z,1520532024.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T18:00:24.523Z,1520532024.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:24.895Z,1520532024.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:24.937Z,1520532024.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T18:00:24.938Z,1520532024.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:25.285Z,1520532025.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:25.300Z,1520532025.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T18:00:25.301Z,1520532025.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:25.703Z,1520532025.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:25.735Z,1520532025.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T18:00:25.736Z,1520532025.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:26.095Z,1520532026.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:26.134Z,1520532026.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T18:00:26.135Z,1520532026.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:26.498Z,1520532026.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:26.525Z,1520532026.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T18:00:26.526Z,1520532026.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:26.913Z,1520532026.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:26.939Z,1520532026.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T18:00:26.940Z,1520532026.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:27.309Z,1520532027.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:27.338Z,1520532027.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T18:00:27.339Z,1520532027.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:27.691Z,1520532027.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:27.707Z,1520532027.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T18:00:27.707Z,1520532027.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:28.096Z,1520532028.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:28.111Z,1520532028.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T18:00:28.112Z,1520532028.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:28.500Z,1520532028.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:28.515Z,1520532028.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T18:00:28.516Z,1520532028.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:28.888Z,1520532028.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:28.922Z,1520532028.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T18:00:28.923Z,1520532028.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:29.305Z,1520532029.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:29.320Z,1520532029.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T18:00:29.321Z,1520532029.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:29.705Z,1520532029.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:29.719Z,1520532029.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T18:00:29.720Z,1520532029.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:30.106Z,1520532030.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:30.121Z,1520532030.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T18:00:30.122Z,1520532030.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:30.498Z,1520532030.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:30.516Z,1520532030.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T18:00:30.517Z,1520532030.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:30.904Z,1520532030.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:30.918Z,1520532030.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T18:00:30.919Z,1520532030.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:31.295Z,1520532031.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:31.315Z,1520532031.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T18:00:31.316Z,1520532031.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:31.704Z,1520532031.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:31.719Z,1520532031.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T18:00:31.720Z,1520532031.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:32.104Z,1520532032.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:32.119Z,1520532032.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T18:00:32.120Z,1520532032.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:32.508Z,1520532032.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:32.530Z,1520532032.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T18:00:32.531Z,1520532032.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:32.912Z,1520532032.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:32.935Z,1520532032.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:33.313Z,1520532033.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:33.328Z,1520532033.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:33.688Z,1520532033.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:33.723Z,1520532033.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:34.104Z,1520532034.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:34.119Z,1520532034.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:34.491Z,1520532034.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:34.526Z,1520532034.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:34.888Z,1520532034.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:34.926Z,1520532034.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:35.313Z,1520532035.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:35.328Z,1520532035.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:35.716Z,1520532035.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:35.731Z,1520532035.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:36.114Z,1520532036.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:36.129Z,1520532036.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:36.491Z,1520532036.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:36.523Z,1520532036.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:36.904Z,1520532036.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:36.919Z,1520532036.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:37.288Z,1520532037.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:37.322Z,1520532037.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:37.691Z,1520532037.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:37.718Z,1520532037.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:38.090Z,1520532038.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:38.117Z,1520532038.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:38.513Z,1520532038.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:38.528Z,1520532038.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:38.913Z,1520532038.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:38.928Z,1520532038.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:39.314Z,1520532039.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:39.329Z,1520532039.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:39.690Z,1520532039.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:39.722Z,1520532039.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:42.813Z,1520532042.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:42.829Z,1520532042.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:42.926Z,1520532042.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:42.966Z,1520532042.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:43.302Z,1520532043.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:43.323Z,1520532043.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:43.705Z,1520532043.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:43.720Z,1520532043.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:44.089Z,1520532044.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:44.114Z,1520532044.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:44.480Z,1520532044.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:44.515Z,1520532044.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:44.882Z,1520532044.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:44.917Z,1520532044.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:45.283Z,1520532045.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:45.317Z,1520532045.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:45.680Z,1520532045.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:45.696Z,1520532045.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:46.078Z,1520532046.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:46.093Z,1520532046.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:46.493Z,1520532046.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:46.518Z,1520532046.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:46.897Z,1520532046.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:46.927Z,1520532046.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:47.292Z,1520532047.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:47.319Z,1520532047.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:47.683Z,1520532047.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:47.698Z,1520532047.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:48.083Z,1520532048.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:48.102Z,1520532048.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:48.485Z,1520532048.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:48.500Z,1520532048.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:48.880Z,1520532048.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:48.895Z,1520532048.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:49.289Z,1520532049.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:49.305Z,1520532049.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:49.697Z,1520532049.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:49.728Z,1520532049.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:50.093Z,1520532050.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:50.129Z,1520532050.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:50.484Z,1520532050.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:50.500Z,1520532050.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:50.879Z,1520532050.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:50.898Z,1520532050.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:51.284Z,1520532051.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:51.299Z,1520532051.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:51.683Z,1520532051.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:51.698Z,1520532051.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:52.079Z,1520532052.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:52.094Z,1520532052.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:52.497Z,1520532052.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:52.533Z,1520532052.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:52.893Z,1520532052.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:52.908Z,1520532052.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:53.290Z,1520532053.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:53.304Z,1520532053.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:53.686Z,1520532053.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:53.701Z,1520532053.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:54.082Z,1520532054.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:54.098Z,1520532054.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:54.488Z,1520532054.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:54.503Z,1520532054.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:54.886Z,1520532054.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:54.901Z,1520532054.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:55.290Z,1520532055.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:55.305Z,1520532055.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:55.693Z,1520532055.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:55.707Z,1520532055.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:56.089Z,1520532056.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:56.105Z,1520532056.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:56.487Z,1520532056.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:56.502Z,1520532056.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:56.886Z,1520532056.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:56.906Z,1520532056.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:57.276Z,1520532057.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:57.300Z,1520532057.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:57.690Z,1520532057.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:57.705Z,1520532057.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:58.084Z,1520532058.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:58.098Z,1520532058.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:58.490Z,1520532058.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:58.506Z,1520532058.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:58.894Z,1520532058.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:58.909Z,1520532058.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:59.290Z,1520532059.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:59.305Z,1520532059.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:00:59.680Z,1520532059.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:00:59.697Z,1520532059.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:00.083Z,1520532060.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:00.106Z,1520532060.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:00.487Z,1520532060.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:00.503Z,1520532060.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:00.878Z,1520532060.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:00.894Z,1520532060.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:01.288Z,1520532061.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:01.304Z,1520532061.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:01.688Z,1520532061.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:01.703Z,1520532061.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:02.089Z,1520532062.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:02.105Z,1520532062.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:02.483Z,1520532062.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:02.498Z,1520532062.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:02.879Z,1520532062.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:02.903Z,1520532062.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:03.280Z,1520532063.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:03.295Z,1520532063.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:03.679Z,1520532063.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:03.702Z,1520532063.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:04.070Z,1520532064.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:04.097Z,1520532064.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:04.489Z,1520532064.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:04.505Z,1520532064.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:04.898Z,1520532064.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:04.915Z,1520532064.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:05.297Z,1520532065.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:05.312Z,1520532065.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:05.669Z,1520532065.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:05.707Z,1520532065.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:06.074Z,1520532066.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:06.101Z,1520532066.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:06.475Z,1520532066.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:06.501Z,1520532066.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:06.872Z,1520532066.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:06.906Z,1520532066.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:07.289Z,1520532067.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:07.311Z,1520532067.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:07.702Z,1520532067.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:07.717Z,1520532067.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:08.098Z,1520532068.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:08.113Z,1520532068.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:08.478Z,1520532068.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:08.505Z,1520532068.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:08.871Z,1520532068.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:08.902Z,1520532068.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:09.271Z,1520532069.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:09.303Z,1520532069.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:09.679Z,1520532069.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:09.706Z,1520532069.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:10.071Z,1520532070.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:10.107Z,1520532070.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:10.502Z,1520532070.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:10.517Z,1520532070.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:10.901Z,1520532070.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:10.917Z,1520532070.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:11.298Z,1520532071.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:11.313Z,1520532071.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:11.668Z,1520532071.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:11.683Z,1520532071.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:12.078Z,1520532072.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:12.110Z,1520532072.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:12.471Z,1520532072.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:12.511Z,1520532072.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:12.872Z,1520532072.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:12.887Z,1520532072.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:13.289Z,1520532073.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:13.316Z,1520532073.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:13.689Z,1520532073.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:13.715Z,1520532073.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:14.089Z,1520532074.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:14.116Z,1520532074.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:14.475Z,1520532074.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:14.511Z,1520532074.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:14.878Z,1520532074.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:14.893Z,1520532074.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:15.270Z,1520532075.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:15.285Z,1520532075.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:15.687Z,1520532075.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:15.716Z,1520532075.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:16.075Z,1520532076.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:16.089Z,1520532076.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:16.493Z,1520532076.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:16.523Z,1520532076.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:16.893Z,1520532076.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:16.917Z,1520532076.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:17.294Z,1520532077.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:17.319Z,1520532077.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:17.675Z,1520532077.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:17.691Z,1520532077.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:18.082Z,1520532078.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:18.116Z,1520532078.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:18.475Z,1520532078.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:18.490Z,1520532078.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:18.876Z,1520532078.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:18.891Z,1520532078.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:19.293Z,1520532079.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:19.323Z,1520532079.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:19.704Z,1520532079.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:19.719Z,1520532079.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:20.093Z,1520532080.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:20.122Z,1520532080.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:20.482Z,1520532080.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:20.516Z,1520532080.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:20.883Z,1520532080.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:20.919Z,1520532080.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:21.272Z,1520532081.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:21.287Z,1520532081.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:21.680Z,1520532081.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:21.695Z,1520532081.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:22.093Z,1520532082.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:22.124Z,1520532082.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:22.485Z,1520532082.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:22.509Z,1520532082.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:22.895Z,1520532082.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:22.931Z,1520532082.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:23.295Z,1520532083.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:23.341Z,1520532083.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:23.676Z,1520532083.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:23.775Z,1520532083.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:24.089Z,1520532084.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:24.133Z,1520532084.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:24.492Z,1520532084.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:24.507Z,1520532084.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:24.873Z,1520532084.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:24.907Z,1520532084.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:25.293Z,1520532085.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:25.309Z,1520532085.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:25.698Z,1520532085.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:25.713Z,1520532085.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:26.090Z,1520532086.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:26.105Z,1520532086.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:26.475Z,1520532086.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:26.507Z,1520532086.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:26.875Z,1520532086.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:26.908Z,1520532086.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:27.272Z,1520532087.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:27.307Z,1520532087.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:27.687Z,1520532087.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:27.703Z,1520532087.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:28.075Z,1520532088.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:28.101Z,1520532088.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:28.493Z,1520532088.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:28.509Z,1520532088.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:28.897Z,1520532088.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:28.912Z,1520532088.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:29.301Z,1520532089.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:29.315Z,1520532089.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:29.669Z,1520532089.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:29.705Z,1520532089.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:30.079Z,1520532090.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:30.105Z,1520532090.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:30.471Z,1520532090.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:30.503Z,1520532090.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:30.872Z,1520532090.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:30.906Z,1520532090.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:31.293Z,1520532091.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:31.309Z,1520532091.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:31.694Z,1520532091.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:31.709Z,1520532091.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:32.101Z,1520532092.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:32.122Z,1520532092.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:32.479Z,1520532092.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:32.505Z,1520532092.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:32.871Z,1520532092.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:32.910Z,1520532092.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:33.268Z,1520532093.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:33.291Z,1520532093.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:33.679Z,1520532093.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:33.705Z,1520532093.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:34.071Z,1520532094.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:34.106Z,1520532094.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:34.489Z,1520532094.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:34.521Z,1520532094.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:34.900Z,1520532094.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:34.915Z,1520532094.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:35.299Z,1520532095.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:35.314Z,1520532095.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:35.670Z,1520532095.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:35.685Z,1520532095.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:36.076Z,1520532096.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:36.091Z,1520532096.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:36.482Z,1520532096.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:36.518Z,1520532096.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:36.872Z,1520532096.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:36.901Z,1520532096.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:37.304Z,1520532097.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:37.319Z,1520532097.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:37.705Z,1520532097.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:37.720Z,1520532097.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:38.091Z,1520532098.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:38.117Z,1520532098.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:38.480Z,1520532098.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:38.513Z,1520532098.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:38.883Z,1520532098.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:38.899Z,1520532098.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:39.277Z,1520532099.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:39.293Z,1520532099.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:39.682Z,1520532099.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:39.699Z,1520532099.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:40.090Z,1520532100.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:40.127Z,1520532100.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:44.422Z,1520532104.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:44.438Z,1520532104.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:44.550Z,1520532104.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:44.595Z,1520532104.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:44.901Z,1520532104.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:44.930Z,1520532104.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:45.290Z,1520532105.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:45.317Z,1520532105.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:45.694Z,1520532105.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:45.725Z,1520532105.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:46.093Z,1520532106.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:46.108Z,1520532106.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:46.503Z,1520532106.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:46.543Z,1520532106.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:46.897Z,1520532106.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:46.913Z,1520532106.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:47.293Z,1520532107.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:47.311Z,1520532107.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:47.690Z,1520532107.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:47.705Z,1520532107.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:48.092Z,1520532108.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:48.108Z,1520532108.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:48.491Z,1520532108.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:48.506Z,1520532108.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:48.890Z,1520532108.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:48.910Z,1520532108.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:49.292Z,1520532109.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:49.314Z,1520532109.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:49.705Z,1520532109.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:49.720Z,1520532109.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:50.097Z,1520532110.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:50.115Z,1520532110.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:50.485Z,1520532110.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:50.500Z,1520532110.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:50.889Z,1520532110.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:50.913Z,1520532110.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:51.295Z,1520532111.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:51.310Z,1520532111.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:51.681Z,1520532111.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:51.704Z,1520532111.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:52.085Z,1520532112.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:52.117Z,1520532112.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:52.504Z,1520532112.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:52.519Z,1520532112.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:52.902Z,1520532112.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:52.918Z,1520532112.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:53.301Z,1520532113.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:53.322Z,1520532113.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:53.696Z,1520532113.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:53.711Z,1520532113.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:54.091Z,1520532114.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:54.110Z,1520532114.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:54.485Z,1520532114.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:54.519Z,1520532114.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:54.883Z,1520532114.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:54.910Z,1520532114.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:55.301Z,1520532115.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:55.317Z,1520532115.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:55.705Z,1520532115.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:55.721Z,1520532115.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:56.106Z,1520532116.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:56.121Z,1520532116.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:56.495Z,1520532116.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:56.510Z,1520532116.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:56.883Z,1520532116.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:56.914Z,1520532116.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:56.929Z,1520532116.929 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T18:01:57.295Z,1520532117.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:57.310Z,1520532117.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:57.682Z,1520532117.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:57.715Z,1520532117.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:58.082Z,1520532118.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:58.119Z,1520532118.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:58.509Z,1520532118.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:58.524Z,1520532118.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:58.897Z,1520532118.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:58.915Z,1520532118.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:59.301Z,1520532119.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:59.316Z,1520532119.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:01:59.683Z,1520532119.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:01:59.714Z,1520532119.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:00.087Z,1520532120.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:00.113Z,1520532120.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:00.487Z,1520532120.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:00.514Z,1520532120.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:00.879Z,1520532120.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:00.911Z,1520532120.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:01.301Z,1520532121.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:01.317Z,1520532121.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:01.705Z,1520532121.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:01.720Z,1520532121.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:02.096Z,1520532122.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:02.126Z,1520532122.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:02.484Z,1520532122.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:02.510Z,1520532122.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:02.883Z,1520532122.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:02.909Z,1520532122.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:03.279Z,1520532123.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:03.314Z,1520532123.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:03.681Z,1520532123.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:03.707Z,1520532123.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:04.083Z,1520532124.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:04.109Z,1520532124.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:04.507Z,1520532124.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:04.522Z,1520532124.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:04.901Z,1520532124.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:04.917Z,1520532124.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:05.306Z,1520532125.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:05.321Z,1520532125.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:05.683Z,1520532125.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:05.709Z,1520532125.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:06.087Z,1520532126.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:06.113Z,1520532126.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:06.483Z,1520532126.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:06.502Z,1520532126.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:06.882Z,1520532126.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:06.902Z,1520532126.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:07.290Z,1520532127.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:07.305Z,1520532127.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:07.697Z,1520532127.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:07.712Z,1520532127.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:08.097Z,1520532128.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:08.112Z,1520532128.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:08.494Z,1520532128.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:08.625Z,1520532128.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:08.884Z,1520532128.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:08.906Z,1520532128.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:09.287Z,1520532129.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:09.302Z,1520532129.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:09.681Z,1520532129.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:09.696Z,1520532129.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:10.084Z,1520532130.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:10.106Z,1520532130.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:10.493Z,1520532130.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:10.508Z,1520532130.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:10.889Z,1520532130.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:10.904Z,1520532130.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:11.297Z,1520532131.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:11.312Z,1520532131.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:11.693Z,1520532131.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:11.738Z,1520532131.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:12.085Z,1520532132.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:12.117Z,1520532132.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:12.501Z,1520532132.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:12.517Z,1520532132.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:12.897Z,1520532132.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:12.912Z,1520532132.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:13.303Z,1520532133.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:13.322Z,1520532133.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:13.702Z,1520532133.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:13.722Z,1520532133.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:14.101Z,1520532134.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:14.122Z,1520532134.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:14.488Z,1520532134.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:14.510Z,1520532134.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:14.887Z,1520532134.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:14.911Z,1520532134.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:15.292Z,1520532135.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:15.308Z,1520532135.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:15.684Z,1520532135.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:15.708Z,1520532135.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:16.083Z,1520532136.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:16.119Z,1520532136.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:16.507Z,1520532136.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:16.522Z,1520532136.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:16.895Z,1520532136.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:16.927Z,1520532136.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:17.308Z,1520532137.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:17.330Z,1520532137.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:17.683Z,1520532137.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:17.717Z,1520532137.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:18.087Z,1520532138.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:18.124Z,1520532138.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:18.483Z,1520532138.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:18.499Z,1520532138.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:18.888Z,1520532138.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:18.924Z,1520532138.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:19.289Z,1520532139.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:19.317Z,1520532139.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:19.705Z,1520532139.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:19.731Z,1520532139.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:20.101Z,1520532140.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:20.125Z,1520532140.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:20.484Z,1520532140.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:20.499Z,1520532140.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:20.890Z,1520532140.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:20.927Z,1520532140.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:21.287Z,1520532141.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:21.302Z,1520532141.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:21.685Z,1520532141.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:21.700Z,1520532141.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:22.086Z,1520532142.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:22.106Z,1520532142.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:22.505Z,1520532142.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:22.536Z,1520532142.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:22.893Z,1520532142.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:22.908Z,1520532142.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:23.301Z,1520532143.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:23.316Z,1520532143.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:23.692Z,1520532143.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:23.707Z,1520532143.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:24.092Z,1520532144.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:24.107Z,1520532144.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:24.491Z,1520532144.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:24.506Z,1520532144.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:24.891Z,1520532144.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:24.906Z,1520532144.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:25.293Z,1520532145.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:25.309Z,1520532145.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:25.706Z,1520532145.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:25.741Z,1520532145.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:26.097Z,1520532146.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:26.118Z,1520532146.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:26.486Z,1520532146.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:26.501Z,1520532146.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:26.890Z,1520532146.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:26.911Z,1520532146.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:27.292Z,1520532147.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:27.306Z,1520532147.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:27.689Z,1520532147.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:27.704Z,1520532147.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:28.091Z,1520532148.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:28.106Z,1520532148.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:28.497Z,1520532148.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:28.512Z,1520532148.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:28.896Z,1520532148.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:28.911Z,1520532148.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:29.297Z,1520532149.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:29.313Z,1520532149.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:29.692Z,1520532149.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:29.706Z,1520532149.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:30.085Z,1520532150.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:30.119Z,1520532150.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:30.495Z,1520532150.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:30.511Z,1520532150.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:30.895Z,1520532150.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:30.910Z,1520532150.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:31.301Z,1520532151.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:31.317Z,1520532151.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:31.701Z,1520532151.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:31.716Z,1520532151.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:32.100Z,1520532152.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:32.115Z,1520532152.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:32.484Z,1520532152.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:32.511Z,1520532152.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:32.895Z,1520532152.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:32.910Z,1520532152.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:33.291Z,1520532153.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:33.315Z,1520532153.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:33.689Z,1520532153.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:33.708Z,1520532153.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:34.087Z,1520532154.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:34.109Z,1520532154.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:34.504Z,1520532154.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:34.526Z,1520532154.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:34.897Z,1520532154.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:34.912Z,1520532154.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:35.301Z,1520532155.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:35.317Z,1520532155.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:35.696Z,1520532155.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:35.711Z,1520532155.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:36.095Z,1520532156.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:36.115Z,1520532156.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:36.491Z,1520532156.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:36.514Z,1520532156.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:36.889Z,1520532156.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:36.915Z,1520532156.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:37.301Z,1520532157.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:37.323Z,1520532157.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:37.704Z,1520532157.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:37.719Z,1520532157.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:38.105Z,1520532158.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:38.121Z,1520532158.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:38.495Z,1520532158.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:38.515Z,1520532158.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:38.891Z,1520532158.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:38.910Z,1520532158.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:39.287Z,1520532159.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:39.310Z,1520532159.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:39.689Z,1520532159.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:39.705Z,1520532159.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:40.091Z,1520532160.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:40.114Z,1520532160.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:43.221Z,1520532163.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:43.253Z,1520532163.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:43.355Z,1520532163.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:43.402Z,1520532163.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:43.725Z,1520532163.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:43.749Z,1520532163.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:44.107Z,1520532164.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:44.127Z,1520532164.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:44.511Z,1520532164.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:44.527Z,1520532164.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:44.909Z,1520532164.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:44.924Z,1520532164.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:45.321Z,1520532165.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:45.353Z,1520532165.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:45.709Z,1520532165.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:45.725Z,1520532165.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:46.109Z,1520532166.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:46.125Z,1520532166.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:46.506Z,1520532166.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:46.524Z,1520532166.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:46.908Z,1520532166.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:46.923Z,1520532166.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:47.306Z,1520532167.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:47.321Z,1520532167.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:47.706Z,1520532167.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:47.726Z,1520532167.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:48.107Z,1520532168.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:48.130Z,1520532168.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:48.521Z,1520532168.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:48.557Z,1520532168.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:48.917Z,1520532168.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:48.934Z,1520532168.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:49.313Z,1520532169.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:49.329Z,1520532169.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:49.711Z,1520532169.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:49.726Z,1520532169.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:50.111Z,1520532170.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:50.126Z,1520532170.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:50.511Z,1520532170.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:50.527Z,1520532170.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:50.911Z,1520532170.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:50.926Z,1520532170.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:51.317Z,1520532171.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:51.333Z,1520532171.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:51.717Z,1520532171.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:51.733Z,1520532171.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:52.114Z,1520532172.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:52.135Z,1520532172.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:52.513Z,1520532172.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:52.528Z,1520532172.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:52.906Z,1520532172.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:52.926Z,1520532172.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:53.305Z,1520532173.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:53.333Z,1520532173.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:53.715Z,1520532173.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:53.735Z,1520532173.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:54.112Z,1520532174.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:54.128Z,1520532174.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:54.518Z,1520532174.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:54.534Z,1520532174.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:54.918Z,1520532174.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:54.933Z,1520532174.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:55.317Z,1520532175.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:55.339Z,1520532175.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:55.709Z,1520532175.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:55.725Z,1520532175.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:56.112Z,1520532176.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:56.128Z,1520532176.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:56.507Z,1520532176.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:56.528Z,1520532176.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:56.910Z,1520532176.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:56.931Z,1520532176.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:57.318Z,1520532177.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:57.336Z,1520532177.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:57.718Z,1520532177.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:57.734Z,1520532177.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:58.117Z,1520532178.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:58.132Z,1520532178.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:58.503Z,1520532178.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:58.526Z,1520532178.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:58.907Z,1520532178.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:58.923Z,1520532178.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:59.311Z,1520532179.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:59.327Z,1520532179.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:02:59.712Z,1520532179.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:02:59.727Z,1520532179.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:00.110Z,1520532180.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:00.131Z,1520532180.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:00.516Z,1520532180.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:00.539Z,1520532180.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:00.920Z,1520532180.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:00.936Z,1520532180.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:01.320Z,1520532181.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:01.336Z,1520532181.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:01.711Z,1520532181.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:01.730Z,1520532181.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:02.107Z,1520532182.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:02.126Z,1520532182.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:02.512Z,1520532182.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:02.527Z,1520532182.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:02.903Z,1520532182.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:02.925Z,1520532182.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:03.323Z,1520532183.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:03.366Z,1520532183.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:03.720Z,1520532183.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:03.736Z,1520532183.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:04.121Z,1520532184.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:04.137Z,1520532184.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:04.495Z,1520532184.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:04.521Z,1520532184.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:04.911Z,1520532184.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:04.931Z,1520532184.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:05.307Z,1520532185.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:05.330Z,1520532185.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:05.709Z,1520532185.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:05.723Z,1520532185.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:06.111Z,1520532186.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:06.130Z,1520532186.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:06.520Z,1520532186.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:06.536Z,1520532186.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:06.920Z,1520532186.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:06.936Z,1520532186.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:07.320Z,1520532187.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:07.336Z,1520532187.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:07.718Z,1520532187.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:07.734Z,1520532187.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:08.095Z,1520532188.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:08.122Z,1520532188.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:08.512Z,1520532188.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:08.527Z,1520532188.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:08.898Z,1520532188.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:08.930Z,1520532188.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:09.317Z,1520532189.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:09.333Z,1520532189.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:09.724Z,1520532189.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:09.739Z,1520532189.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:10.122Z,1520532190.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:10.139Z,1520532190.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:10.511Z,1520532190.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:10.526Z,1520532190.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:10.911Z,1520532190.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:10.926Z,1520532190.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:11.298Z,1520532191.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:11.331Z,1520532191.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:11.699Z,1520532191.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:11.730Z,1520532191.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:12.111Z,1520532192.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:12.131Z,1520532192.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:12.521Z,1520532192.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:12.539Z,1520532192.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:12.925Z,1520532192.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:12.940Z,1520532192.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:13.321Z,1520532193.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:13.337Z,1520532193.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:13.699Z,1520532193.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:13.730Z,1520532193.730 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:13.731Z,1520532193.731 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 206
2018-03-08T18:03:13.731Z,1520532193.731 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T18:03:13.736Z,1520532193.736 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:13.737Z,1520532193.737 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 206
2018-03-08T18:03:13.737Z,1520532193.737 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T18:03:13.738Z,1520532193.738 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:13.738Z,1520532193.738 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 206
2018-03-08T18:03:13.739Z,1520532193.739 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T18:03:13.759Z,1520532193.759 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T18:03:13.759Z,1520532193.759 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T18:03:13.759Z,1520532193.759 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T18:03:14.099Z,1520532194.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:14.154Z,1520532194.154 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T18:03:14.154Z,1520532194.154 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 206
2018-03-08T18:03:14.154Z,1520532194.154 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T18:03:14.154Z,1520532194.154 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 206
2018-03-08T18:03:14.155Z,1520532194.155 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T18:03:14.155Z,1520532194.155 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 206
2018-03-08T18:03:14.503Z,1520532194.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:14.534Z,1520532194.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T18:03:14.535Z,1520532194.535 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:03:14.535Z,1520532194.535 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:03:14.535Z,1520532194.535 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T18:03:14.536Z,1520532194.536 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:03:14.536Z,1520532194.536 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:03:14.537Z,1520532194.537 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T18:03:14.537Z,1520532194.537 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:03:14.537Z,1520532194.537 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:03:14.904Z,1520532194.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:14.919Z,1520532194.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T18:03:14.920Z,1520532194.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:15.317Z,1520532195.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:15.350Z,1520532195.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T18:03:15.351Z,1520532195.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:15.720Z,1520532195.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:15.749Z,1520532195.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T18:03:15.750Z,1520532195.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:16.117Z,1520532196.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:16.148Z,1520532196.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T18:03:16.153Z,1520532196.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:16.507Z,1520532196.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:16.522Z,1520532196.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T18:03:16.523Z,1520532196.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:16.908Z,1520532196.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:16.922Z,1520532196.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T18:03:16.923Z,1520532196.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:17.308Z,1520532197.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:17.322Z,1520532197.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T18:03:17.323Z,1520532197.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:17.708Z,1520532197.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:17.722Z,1520532197.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T18:03:17.723Z,1520532197.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:18.106Z,1520532198.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:18.121Z,1520532198.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T18:03:18.121Z,1520532198.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:18.509Z,1520532198.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:18.524Z,1520532198.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T18:03:18.525Z,1520532198.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:18.921Z,1520532198.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:18.954Z,1520532198.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T18:03:18.954Z,1520532198.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:19.313Z,1520532199.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:19.328Z,1520532199.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T18:03:19.329Z,1520532199.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:19.708Z,1520532199.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:19.722Z,1520532199.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T18:03:19.723Z,1520532199.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:20.110Z,1520532200.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:20.124Z,1520532200.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T18:03:20.125Z,1520532200.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:20.511Z,1520532200.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:20.526Z,1520532200.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T18:03:20.527Z,1520532200.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:20.907Z,1520532200.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:20.921Z,1520532200.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T18:03:20.922Z,1520532200.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:21.313Z,1520532201.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:21.328Z,1520532201.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T18:03:21.329Z,1520532201.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:21.713Z,1520532201.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:21.757Z,1520532201.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T18:03:21.758Z,1520532201.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:22.120Z,1520532202.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:22.135Z,1520532202.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T18:03:22.136Z,1520532202.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:22.521Z,1520532202.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:22.584Z,1520532202.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-08T18:03:22.585Z,1520532202.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:22.911Z,1520532202.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:22.930Z,1520532202.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T18:03:22.931Z,1520532202.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:23.307Z,1520532203.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:23.326Z,1520532203.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T18:03:23.327Z,1520532203.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:23.708Z,1520532203.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:23.730Z,1520532203.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T18:03:23.731Z,1520532203.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:24.110Z,1520532204.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:24.130Z,1520532204.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T18:03:24.131Z,1520532204.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:24.517Z,1520532204.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:24.539Z,1520532204.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T18:03:24.540Z,1520532204.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:24.920Z,1520532204.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:24.935Z,1520532204.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T18:03:24.936Z,1520532204.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:25.366Z,1520532205.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:25.393Z,1520532205.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T18:03:25.394Z,1520532205.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:25.710Z,1520532205.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:25.730Z,1520532205.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T18:03:25.731Z,1520532205.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:26.113Z,1520532206.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:26.127Z,1520532206.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T18:03:26.128Z,1520532206.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:26.499Z,1520532206.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:26.527Z,1520532206.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T18:03:26.528Z,1520532206.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:26.902Z,1520532206.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:26.922Z,1520532206.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T18:03:26.923Z,1520532206.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:27.346Z,1520532207.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:27.386Z,1520532207.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-08T18:03:27.387Z,1520532207.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:27.717Z,1520532207.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:27.744Z,1520532207.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T18:03:27.749Z,1520532207.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:28.121Z,1520532208.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:28.152Z,1520532208.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T18:03:28.157Z,1520532208.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:28.512Z,1520532208.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:28.527Z,1520532208.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T18:03:28.528Z,1520532208.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:28.905Z,1520532208.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:28.920Z,1520532208.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T18:03:28.921Z,1520532208.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:29.307Z,1520532209.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:29.326Z,1520532209.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T18:03:29.327Z,1520532209.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:29.712Z,1520532209.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:29.727Z,1520532209.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T18:03:29.727Z,1520532209.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:30.111Z,1520532210.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:30.126Z,1520532210.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T18:03:30.127Z,1520532210.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:30.514Z,1520532210.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:30.529Z,1520532210.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T18:03:30.530Z,1520532210.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:30.918Z,1520532210.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:30.932Z,1520532210.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T18:03:30.934Z,1520532210.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:31.312Z,1520532211.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:31.328Z,1520532211.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T18:03:31.329Z,1520532211.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:31.710Z,1520532211.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:31.725Z,1520532211.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T18:03:31.726Z,1520532211.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:32.111Z,1520532212.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:32.126Z,1520532212.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T18:03:32.127Z,1520532212.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:32.504Z,1520532212.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:32.526Z,1520532212.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T18:03:32.527Z,1520532212.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:32.911Z,1520532212.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:32.926Z,1520532212.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T18:03:32.927Z,1520532212.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:33.313Z,1520532213.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:33.327Z,1520532213.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T18:03:33.328Z,1520532213.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:33.712Z,1520532213.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:33.727Z,1520532213.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T18:03:33.728Z,1520532213.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:34.112Z,1520532214.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:34.127Z,1520532214.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:34.510Z,1520532214.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:34.525Z,1520532214.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:34.905Z,1520532214.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:34.921Z,1520532214.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:35.303Z,1520532215.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:35.334Z,1520532215.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:35.712Z,1520532215.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:35.726Z,1520532215.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:36.110Z,1520532216.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:36.126Z,1520532216.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:36.512Z,1520532216.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:36.528Z,1520532216.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:36.917Z,1520532216.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:36.932Z,1520532216.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:37.309Z,1520532217.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:37.339Z,1520532217.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:37.711Z,1520532217.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:37.726Z,1520532217.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:38.107Z,1520532218.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:38.122Z,1520532218.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:38.511Z,1520532218.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:38.526Z,1520532218.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:38.908Z,1520532218.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:38.923Z,1520532218.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:39.316Z,1520532219.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:39.331Z,1520532219.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:39.717Z,1520532219.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:39.732Z,1520532219.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:40.116Z,1520532220.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:40.139Z,1520532220.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:44.454Z,1520532224.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:44.470Z,1520532224.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:44.574Z,1520532224.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:44.616Z,1520532224.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:44.962Z,1520532224.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:44.987Z,1520532224.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:45.337Z,1520532225.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:45.371Z,1520532225.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:45.765Z,1520532225.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:45.791Z,1520532225.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:46.142Z,1520532226.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:46.182Z,1520532226.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:46.528Z,1520532226.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:46.544Z,1520532226.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:46.915Z,1520532226.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:46.949Z,1520532226.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:47.329Z,1520532227.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:47.350Z,1520532227.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:47.733Z,1520532227.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:47.749Z,1520532227.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:48.134Z,1520532228.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:48.149Z,1520532228.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:48.529Z,1520532228.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:48.544Z,1520532228.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:48.928Z,1520532228.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:48.943Z,1520532228.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:49.316Z,1520532229.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:49.344Z,1520532229.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:49.727Z,1520532229.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:49.743Z,1520532229.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:50.111Z,1520532230.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:50.146Z,1520532230.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:50.526Z,1520532230.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:50.554Z,1520532230.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:50.940Z,1520532230.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:50.955Z,1520532230.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:51.339Z,1520532231.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:51.363Z,1520532231.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:51.712Z,1520532231.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:51.751Z,1520532231.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:52.119Z,1520532232.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:52.150Z,1520532232.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:52.511Z,1520532232.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:52.545Z,1520532232.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:52.912Z,1520532232.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:52.947Z,1520532232.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:53.334Z,1520532233.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:53.356Z,1520532233.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:53.734Z,1520532233.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:53.749Z,1520532233.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:54.141Z,1520532234.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:54.157Z,1520532234.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:54.515Z,1520532234.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:54.541Z,1520532234.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:54.915Z,1520532234.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:54.942Z,1520532234.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:55.312Z,1520532235.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:55.340Z,1520532235.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:55.715Z,1520532235.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:55.751Z,1520532235.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:56.119Z,1520532236.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:56.145Z,1520532236.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:56.529Z,1520532236.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:56.562Z,1520532236.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:56.941Z,1520532236.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:56.962Z,1520532236.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:57.343Z,1520532237.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:57.358Z,1520532237.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:57.715Z,1520532237.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:57.750Z,1520532237.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:58.119Z,1520532238.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:58.151Z,1520532238.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:58.511Z,1520532238.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:58.554Z,1520532238.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:58.912Z,1520532238.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:58.927Z,1520532238.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:59.342Z,1520532239.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:59.358Z,1520532239.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:03:59.729Z,1520532239.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:03:59.756Z,1520532239.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:00.126Z,1520532240.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:00.163Z,1520532240.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:00.516Z,1520532240.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:00.532Z,1520532240.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:00.919Z,1520532240.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:00.934Z,1520532240.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:01.312Z,1520532241.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:01.327Z,1520532241.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:01.718Z,1520532241.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:01.739Z,1520532241.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:02.119Z,1520532242.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:02.135Z,1520532242.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:02.521Z,1520532242.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:02.537Z,1520532242.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:02.929Z,1520532242.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:02.950Z,1520532242.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:03.332Z,1520532243.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:03.347Z,1520532243.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:03.708Z,1520532243.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:03.723Z,1520532243.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:04.116Z,1520532244.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:04.131Z,1520532244.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:04.513Z,1520532244.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:04.528Z,1520532244.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:04.909Z,1520532244.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:04.925Z,1520532244.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:05.342Z,1520532245.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:05.373Z,1520532245.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:05.733Z,1520532245.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:05.748Z,1520532245.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:06.134Z,1520532246.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:06.149Z,1520532246.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:06.547Z,1520532246.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:06.562Z,1520532246.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:06.917Z,1520532246.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:06.933Z,1520532246.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:07.315Z,1520532247.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:07.343Z,1520532247.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:07.716Z,1520532247.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:07.747Z,1520532247.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:08.115Z,1520532248.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:08.151Z,1520532248.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:08.530Z,1520532248.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:08.555Z,1520532248.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:08.938Z,1520532248.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:08.953Z,1520532248.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:09.334Z,1520532249.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:09.349Z,1520532249.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:09.719Z,1520532249.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:09.742Z,1520532249.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:10.127Z,1520532250.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:10.143Z,1520532250.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:10.528Z,1520532250.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:10.543Z,1520532250.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:10.911Z,1520532250.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:10.947Z,1520532250.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:11.337Z,1520532251.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:11.353Z,1520532251.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:11.735Z,1520532251.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:11.750Z,1520532251.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:12.130Z,1520532252.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:12.151Z,1520532252.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:12.515Z,1520532252.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:12.546Z,1520532252.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:12.915Z,1520532252.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:12.942Z,1520532252.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:13.313Z,1520532253.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:13.340Z,1520532253.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:13.720Z,1520532253.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:13.752Z,1520532253.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:14.119Z,1520532254.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:14.146Z,1520532254.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:14.535Z,1520532254.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:14.550Z,1520532254.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:14.934Z,1520532254.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:14.961Z,1520532254.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:15.340Z,1520532255.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:15.355Z,1520532255.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:15.712Z,1520532255.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:15.728Z,1520532255.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:16.119Z,1520532256.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:16.151Z,1520532256.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:16.524Z,1520532256.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:16.559Z,1520532256.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:16.912Z,1520532256.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:16.927Z,1520532256.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:17.334Z,1520532257.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:17.363Z,1520532257.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:17.745Z,1520532257.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:17.760Z,1520532257.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:18.144Z,1520532258.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:18.160Z,1520532258.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:18.531Z,1520532258.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:18.563Z,1520532258.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:18.920Z,1520532258.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:18.935Z,1520532258.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:19.316Z,1520532259.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:19.332Z,1520532259.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:19.720Z,1520532259.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:19.736Z,1520532259.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:20.118Z,1520532260.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:20.134Z,1520532260.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:20.522Z,1520532260.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:20.538Z,1520532260.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:20.938Z,1520532260.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:20.961Z,1520532260.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:21.333Z,1520532261.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:21.361Z,1520532261.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:21.719Z,1520532261.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:21.735Z,1520532261.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:22.119Z,1520532262.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:22.157Z,1520532262.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:22.521Z,1520532262.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:22.536Z,1520532262.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:22.919Z,1520532262.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:22.935Z,1520532262.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:23.329Z,1520532263.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:23.367Z,1520532263.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:23.733Z,1520532263.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:23.748Z,1520532263.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:24.138Z,1520532264.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:24.173Z,1520532264.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:24.527Z,1520532264.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:24.542Z,1520532264.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:24.924Z,1520532264.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:24.940Z,1520532264.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:25.316Z,1520532265.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:25.349Z,1520532265.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:25.727Z,1520532265.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:25.743Z,1520532265.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:26.125Z,1520532266.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:26.141Z,1520532266.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:26.533Z,1520532266.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:26.549Z,1520532266.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:26.934Z,1520532266.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:26.949Z,1520532266.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:27.334Z,1520532267.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:27.349Z,1520532267.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:27.715Z,1520532267.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:27.738Z,1520532267.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:28.119Z,1520532268.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:28.143Z,1520532268.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:28.529Z,1520532268.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:28.550Z,1520532268.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:28.917Z,1520532268.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:28.938Z,1520532268.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:29.333Z,1520532269.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:29.399Z,1520532269.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:29.734Z,1520532269.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:29.749Z,1520532269.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:30.133Z,1520532270.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:30.149Z,1520532270.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:30.523Z,1520532270.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:30.539Z,1520532270.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:30.929Z,1520532270.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:30.945Z,1520532270.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:31.315Z,1520532271.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:31.338Z,1520532271.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:31.721Z,1520532271.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:31.741Z,1520532271.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:32.124Z,1520532272.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:32.140Z,1520532272.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:32.524Z,1520532272.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:32.556Z,1520532272.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:32.934Z,1520532272.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:32.949Z,1520532272.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:33.334Z,1520532273.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:33.349Z,1520532273.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:33.715Z,1520532273.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:33.738Z,1520532273.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:34.119Z,1520532274.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:34.141Z,1520532274.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:34.523Z,1520532274.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:34.543Z,1520532274.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:34.928Z,1520532274.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:34.944Z,1520532274.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:35.332Z,1520532275.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:35.348Z,1520532275.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:35.734Z,1520532275.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:35.749Z,1520532275.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:36.129Z,1520532276.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:36.145Z,1520532276.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:36.527Z,1520532276.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:36.543Z,1520532276.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:36.928Z,1520532276.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:36.945Z,1520532276.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:37.319Z,1520532277.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:37.339Z,1520532277.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:37.725Z,1520532277.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:37.740Z,1520532277.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:38.121Z,1520532278.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:38.143Z,1520532278.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:38.526Z,1520532278.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:38.553Z,1520532278.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:38.938Z,1520532278.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:38.959Z,1520532278.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:39.338Z,1520532279.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:39.359Z,1520532279.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:39.729Z,1520532279.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:39.745Z,1520532279.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:40.121Z,1520532280.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:40.147Z,1520532280.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:43.237Z,1520532283.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:43.253Z,1520532283.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:43.256Z,1520532283.256 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T17:59:42.4Z
2018-03-08T18:04:43.256Z,1520532283.256 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T18:04:43.256Z,1520532283.256 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T18:04:43.350Z,1520532283.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:43.397Z,1520532283.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:43.789Z,1520532283.789 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0240.lzma
2018-03-08T18:04:43.824Z,1520532283.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:43.852Z,1520532283.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:44.121Z,1520532284.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:44.166Z,1520532284.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:44.482Z,1520532284.482 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0240.lzma.bak
2018-03-08T18:04:44.483Z,1520532284.483 [DataOverHttps](INFO): SBD MOMSN=7987915
2018-03-08T18:04:44.518Z,1520532284.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:44.553Z,1520532284.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:45.098Z,1520532285.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:45.113Z,1520532285.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:45.300Z,1520532285.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:45.345Z,1520532285.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:45.707Z,1520532285.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:45.723Z,1520532285.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:48.802Z,1520532288.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:48.818Z,1520532288.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:48.922Z,1520532288.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:48.953Z,1520532288.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:49.317Z,1520532289.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:49.332Z,1520532289.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:49.709Z,1520532289.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:49.730Z,1520532289.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:50.109Z,1520532290.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:50.124Z,1520532290.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:50.507Z,1520532290.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:50.523Z,1520532290.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:50.904Z,1520532290.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:50.920Z,1520532290.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:54.073Z,1520532294.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:54.104Z,1520532294.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:54.212Z,1520532294.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:54.228Z,1520532294.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:54.534Z,1520532294.534 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180308T074127/Express0241.lzma
2018-03-08T18:04:54.577Z,1520532294.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:54.608Z,1520532294.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:54.959Z,1520532294.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:54.995Z,1520532294.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:55.332Z,1520532295.332 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0241.lzma.bak
2018-03-08T18:04:55.332Z,1520532295.332 [DataOverHttps](INFO): SBD MOMSN=7987917
2018-03-08T18:04:55.374Z,1520532295.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:55.402Z,1520532295.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:55.956Z,1520532295.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:55.971Z,1520532295.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:55.974Z,1520532295.974 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T18:04:55.974Z,1520532295.974 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T18:04:55.974Z,1520532295.974 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T18:04:56.165Z,1520532296.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:56.210Z,1520532296.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:59.281Z,1520532299.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:59.305Z,1520532299.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:59.422Z,1520532299.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:59.453Z,1520532299.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:04:59.764Z,1520532299.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:04:59.810Z,1520532299.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:00.162Z,1520532300.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:00.177Z,1520532300.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:00.565Z,1520532300.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:00.580Z,1520532300.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:00.960Z,1520532300.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:00.975Z,1520532300.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:01.366Z,1520532301.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:01.381Z,1520532301.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:01.764Z,1520532301.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:01.786Z,1520532301.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:02.168Z,1520532302.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:02.184Z,1520532302.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:02.560Z,1520532302.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:02.575Z,1520532302.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:02.956Z,1520532302.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:02.983Z,1520532302.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:03.360Z,1520532303.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:03.375Z,1520532303.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:03.761Z,1520532303.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:03.776Z,1520532303.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:04.148Z,1520532304.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:04.185Z,1520532304.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:04.574Z,1520532304.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:04.589Z,1520532304.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:04.974Z,1520532304.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:04.989Z,1520532304.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:05.366Z,1520532305.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:05.387Z,1520532305.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:05.751Z,1520532305.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:05.778Z,1520532305.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:06.151Z,1520532306.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:06.187Z,1520532306.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:06.552Z,1520532306.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:06.579Z,1520532306.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:06.952Z,1520532306.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:06.991Z,1520532306.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:07.374Z,1520532307.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:07.395Z,1520532307.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:07.770Z,1520532307.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:07.785Z,1520532307.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:08.172Z,1520532308.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:08.188Z,1520532308.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:08.550Z,1520532308.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:08.589Z,1520532308.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:08.944Z,1520532308.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:08.987Z,1520532308.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:09.353Z,1520532309.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:09.379Z,1520532309.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:09.752Z,1520532309.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:09.796Z,1520532309.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:10.151Z,1520532310.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:10.179Z,1520532310.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:10.574Z,1520532310.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:10.594Z,1520532310.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:10.974Z,1520532310.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:10.995Z,1520532310.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:11.368Z,1520532311.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:11.391Z,1520532311.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:11.752Z,1520532311.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:11.784Z,1520532311.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:12.151Z,1520532312.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:12.201Z,1520532312.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:12.552Z,1520532312.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:12.583Z,1520532312.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:12.951Z,1520532312.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:12.986Z,1520532312.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:13.365Z,1520532313.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:13.392Z,1520532313.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:13.765Z,1520532313.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:13.801Z,1520532313.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:14.180Z,1520532314.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:14.195Z,1520532314.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:14.559Z,1520532314.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:14.594Z,1520532314.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:14.957Z,1520532314.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:14.980Z,1520532314.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:15.359Z,1520532315.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:15.397Z,1520532315.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:15.759Z,1520532315.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:15.794Z,1520532315.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:16.159Z,1520532316.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:16.195Z,1520532316.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:16.573Z,1520532316.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:16.603Z,1520532316.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:16.969Z,1520532316.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:16.986Z,1520532316.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:17.369Z,1520532317.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:17.384Z,1520532317.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:17.760Z,1520532317.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:17.783Z,1520532317.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:18.160Z,1520532318.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:18.175Z,1520532318.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:18.561Z,1520532318.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:18.577Z,1520532318.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:18.957Z,1520532318.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:18.977Z,1520532318.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:19.382Z,1520532319.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:19.431Z,1520532319.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:19.766Z,1520532319.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:19.781Z,1520532319.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:20.170Z,1520532320.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:20.187Z,1520532320.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:20.565Z,1520532320.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:20.581Z,1520532320.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:20.960Z,1520532320.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:20.976Z,1520532320.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:21.358Z,1520532321.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:21.387Z,1520532321.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:21.752Z,1520532321.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:21.784Z,1520532321.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:22.151Z,1520532322.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:22.179Z,1520532322.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:22.575Z,1520532322.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:22.591Z,1520532322.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:22.975Z,1520532322.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:22.990Z,1520532322.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:23.373Z,1520532323.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:23.394Z,1520532323.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:23.752Z,1520532323.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:23.784Z,1520532323.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:24.152Z,1520532324.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:24.195Z,1520532324.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:24.553Z,1520532324.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:24.581Z,1520532324.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:24.951Z,1520532324.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:24.984Z,1520532324.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:25.376Z,1520532325.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:25.391Z,1520532325.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:25.773Z,1520532325.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:25.797Z,1520532325.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:26.173Z,1520532326.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:26.197Z,1520532326.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:26.551Z,1520532326.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:26.578Z,1520532326.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:26.951Z,1520532326.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:26.967Z,1520532326.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:27.359Z,1520532327.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:27.398Z,1520532327.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:27.752Z,1520532327.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:27.767Z,1520532327.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:28.159Z,1520532328.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:28.195Z,1520532328.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:28.569Z,1520532328.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:28.604Z,1520532328.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:28.969Z,1520532328.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:29.006Z,1520532329.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:29.373Z,1520532329.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:29.405Z,1520532329.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:29.756Z,1520532329.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:29.771Z,1520532329.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:30.157Z,1520532330.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:30.172Z,1520532330.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:30.555Z,1520532330.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:30.575Z,1520532330.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:30.957Z,1520532330.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:30.978Z,1520532330.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:31.365Z,1520532331.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:31.380Z,1520532331.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:31.765Z,1520532331.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:31.780Z,1520532331.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:32.166Z,1520532332.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:32.182Z,1520532332.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:32.561Z,1520532332.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:32.576Z,1520532332.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:32.957Z,1520532332.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:32.978Z,1520532332.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:33.355Z,1520532333.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:33.378Z,1520532333.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:33.757Z,1520532333.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:33.772Z,1520532333.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:34.160Z,1520532334.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:34.176Z,1520532334.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:34.565Z,1520532334.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:34.581Z,1520532334.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:34.966Z,1520532334.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:34.986Z,1520532334.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:35.365Z,1520532335.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:35.386Z,1520532335.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:35.761Z,1520532335.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:35.777Z,1520532335.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:36.155Z,1520532336.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:36.198Z,1520532336.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:36.553Z,1520532336.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:36.568Z,1520532336.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:36.959Z,1520532336.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:36.995Z,1520532336.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:37.365Z,1520532337.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:37.396Z,1520532337.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:37.765Z,1520532337.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:37.798Z,1520532337.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:38.170Z,1520532338.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:38.202Z,1520532338.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:38.559Z,1520532338.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:38.598Z,1520532338.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:38.953Z,1520532338.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:38.968Z,1520532338.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:39.353Z,1520532339.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:39.368Z,1520532339.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:39.757Z,1520532339.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:39.772Z,1520532339.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:40.157Z,1520532340.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:40.172Z,1520532340.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:40.569Z,1520532340.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:40.605Z,1520532340.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:40.965Z,1520532340.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:40.980Z,1520532340.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:41.365Z,1520532341.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:41.381Z,1520532341.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:41.757Z,1520532341.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:41.821Z,1520532341.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:42.169Z,1520532342.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:42.218Z,1520532342.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:42.574Z,1520532342.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:42.601Z,1520532342.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:42.956Z,1520532342.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:42.991Z,1520532342.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:43.377Z,1520532343.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:43.441Z,1520532343.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:43.777Z,1520532343.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:43.794Z,1520532343.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:44.178Z,1520532344.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:44.198Z,1520532344.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:44.554Z,1520532344.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:44.610Z,1520532344.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:44.976Z,1520532344.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:44.999Z,1520532344.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:45.359Z,1520532345.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:45.388Z,1520532345.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:45.757Z,1520532345.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:45.808Z,1520532345.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:46.160Z,1520532346.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:46.175Z,1520532346.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:46.566Z,1520532346.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:46.582Z,1520532346.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:46.966Z,1520532346.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:46.981Z,1520532346.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:47.365Z,1520532347.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:47.381Z,1520532347.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:47.758Z,1520532347.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:47.777Z,1520532347.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:48.160Z,1520532348.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:48.175Z,1520532348.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:48.559Z,1520532348.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:48.578Z,1520532348.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:48.957Z,1520532348.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:48.977Z,1520532348.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:49.367Z,1520532349.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:49.382Z,1520532349.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:49.765Z,1520532349.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:49.780Z,1520532349.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:50.165Z,1520532350.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:50.181Z,1520532350.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:50.561Z,1520532350.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:50.575Z,1520532350.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:50.960Z,1520532350.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:50.975Z,1520532350.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:51.357Z,1520532351.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:51.379Z,1520532351.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:51.760Z,1520532351.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:51.782Z,1520532351.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:52.162Z,1520532352.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:52.177Z,1520532352.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:52.565Z,1520532352.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:52.581Z,1520532352.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:52.964Z,1520532352.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:52.979Z,1520532352.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:53.365Z,1520532353.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:53.381Z,1520532353.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:53.762Z,1520532353.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:53.777Z,1520532353.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:54.171Z,1520532354.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:54.211Z,1520532354.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:54.562Z,1520532354.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:54.582Z,1520532354.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:54.963Z,1520532354.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:54.978Z,1520532354.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:55.367Z,1520532355.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:55.392Z,1520532355.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:55.767Z,1520532355.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:55.783Z,1520532355.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:56.175Z,1520532356.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:56.225Z,1520532356.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:05:56.566Z,1520532356.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:05:56.596Z,1520532356.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:00.434Z,1520532360.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:00.562Z,1520532360.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:00.664Z,1520532360.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:00.679Z,1520532360.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:01.033Z,1520532361.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:01.068Z,1520532361.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:01.437Z,1520532361.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:01.468Z,1520532361.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:01.833Z,1520532361.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:01.866Z,1520532361.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:02.227Z,1520532362.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:02.242Z,1520532362.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:02.618Z,1520532362.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:02.657Z,1520532362.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:03.025Z,1520532363.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:03.041Z,1520532363.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:03.429Z,1520532363.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:03.444Z,1520532363.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:03.827Z,1520532363.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:03.847Z,1520532363.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:04.232Z,1520532364.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:04.255Z,1520532364.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:04.626Z,1520532364.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:04.641Z,1520532364.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:05.020Z,1520532365.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:05.042Z,1520532365.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:05.422Z,1520532365.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:05.438Z,1520532365.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:05.823Z,1520532365.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:05.838Z,1520532365.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:06.233Z,1520532366.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:06.255Z,1520532366.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:06.636Z,1520532366.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:06.655Z,1520532366.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:07.040Z,1520532367.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:07.056Z,1520532367.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:07.427Z,1520532367.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:07.442Z,1520532367.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:07.827Z,1520532367.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:07.842Z,1520532367.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:08.234Z,1520532368.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:08.254Z,1520532368.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:08.628Z,1520532368.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:08.652Z,1520532368.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:09.035Z,1520532369.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:09.051Z,1520532369.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:09.416Z,1520532369.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:09.443Z,1520532369.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:09.812Z,1520532369.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:09.852Z,1520532369.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:10.239Z,1520532370.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:10.255Z,1520532370.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:10.638Z,1520532370.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:10.654Z,1520532370.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:11.040Z,1520532371.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:11.059Z,1520532371.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:11.412Z,1520532371.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:11.440Z,1520532371.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:11.811Z,1520532371.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:11.852Z,1520532371.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:12.236Z,1520532372.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:12.251Z,1520532372.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:12.638Z,1520532372.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:12.653Z,1520532372.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:13.031Z,1520532373.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:13.050Z,1520532373.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:13.411Z,1520532373.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:13.451Z,1520532373.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:13.822Z,1520532373.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:13.866Z,1520532373.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:14.224Z,1520532374.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:14.261Z,1520532374.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:14.625Z,1520532374.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:14.660Z,1520532374.660 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:14.660Z,1520532374.660 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 207
2018-03-08T18:06:14.660Z,1520532374.660 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T18:06:14.662Z,1520532374.662 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:14.662Z,1520532374.662 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 207
2018-03-08T18:06:14.662Z,1520532374.662 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T18:06:14.664Z,1520532374.664 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:14.664Z,1520532374.664 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 207
2018-03-08T18:06:14.664Z,1520532374.664 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T18:06:14.676Z,1520532374.676 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T18:06:14.676Z,1520532374.676 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T18:06:14.677Z,1520532374.677 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T18:06:15.031Z,1520532375.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:15.065Z,1520532375.065 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T18:06:15.065Z,1520532375.065 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 207
2018-03-08T18:06:15.065Z,1520532375.065 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T18:06:15.065Z,1520532375.065 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 207
2018-03-08T18:06:15.066Z,1520532375.066 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T18:06:15.066Z,1520532375.066 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 207
2018-03-08T18:06:15.420Z,1520532375.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:15.446Z,1520532375.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T18:06:15.447Z,1520532375.447 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:06:15.447Z,1520532375.447 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:06:15.448Z,1520532375.448 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T18:06:15.448Z,1520532375.448 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:06:15.448Z,1520532375.448 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:06:15.461Z,1520532375.461 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T18:06:15.461Z,1520532375.461 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:06:15.461Z,1520532375.461 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:06:15.815Z,1520532375.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:15.830Z,1520532375.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T18:06:15.831Z,1520532375.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:16.229Z,1520532376.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:16.260Z,1520532376.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T18:06:16.261Z,1520532376.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:16.636Z,1520532376.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:16.664Z,1520532376.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T18:06:16.665Z,1520532376.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:17.030Z,1520532377.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:17.062Z,1520532377.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T18:06:17.063Z,1520532377.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:17.424Z,1520532377.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:17.462Z,1520532377.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T18:06:17.463Z,1520532377.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:17.820Z,1520532377.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:17.834Z,1520532377.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T18:06:17.835Z,1520532377.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:18.224Z,1520532378.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:18.239Z,1520532378.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T18:06:18.240Z,1520532378.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:18.633Z,1520532378.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:18.648Z,1520532378.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T18:06:18.669Z,1520532378.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:19.027Z,1520532379.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:19.041Z,1520532379.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T18:06:19.042Z,1520532379.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:19.426Z,1520532379.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:19.441Z,1520532379.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T18:06:19.442Z,1520532379.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:19.823Z,1520532379.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:19.838Z,1520532379.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T18:06:19.839Z,1520532379.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:20.230Z,1520532380.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:20.245Z,1520532380.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T18:06:20.246Z,1520532380.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:20.622Z,1520532380.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:20.649Z,1520532380.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T18:06:20.650Z,1520532380.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:21.029Z,1520532381.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:21.044Z,1520532381.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T18:06:21.045Z,1520532381.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:21.428Z,1520532381.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:21.443Z,1520532381.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T18:06:21.444Z,1520532381.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:21.826Z,1520532381.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:21.853Z,1520532381.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T18:06:21.854Z,1520532381.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:22.234Z,1520532382.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:22.249Z,1520532382.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T18:06:22.250Z,1520532382.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:22.643Z,1520532382.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:22.658Z,1520532382.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T18:06:22.659Z,1520532382.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:23.035Z,1520532383.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:23.059Z,1520532383.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T18:06:23.060Z,1520532383.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:23.417Z,1520532383.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:23.460Z,1520532383.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T18:06:23.461Z,1520532383.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:23.816Z,1520532383.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:23.877Z,1520532383.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T18:06:23.878Z,1520532383.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:24.226Z,1520532384.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:24.252Z,1520532384.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T18:06:24.253Z,1520532384.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:24.638Z,1520532384.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:24.653Z,1520532384.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T18:06:24.654Z,1520532384.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:25.042Z,1520532385.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:25.068Z,1520532385.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T18:06:25.069Z,1520532385.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:25.421Z,1520532385.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:25.452Z,1520532385.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T18:06:25.453Z,1520532385.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:25.818Z,1520532385.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:25.832Z,1520532385.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T18:06:25.841Z,1520532385.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:26.232Z,1520532386.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:26.258Z,1520532386.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T18:06:26.259Z,1520532386.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:26.623Z,1520532386.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:26.652Z,1520532386.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T18:06:26.653Z,1520532386.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:27.033Z,1520532387.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:27.062Z,1520532387.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T18:06:27.063Z,1520532387.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:27.417Z,1520532387.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:27.432Z,1520532387.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T18:06:27.433Z,1520532387.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:27.812Z,1520532387.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:27.862Z,1520532387.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T18:06:27.863Z,1520532387.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:28.230Z,1520532388.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:28.259Z,1520532388.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T18:06:28.260Z,1520532388.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:28.637Z,1520532388.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:28.661Z,1520532388.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T18:06:28.662Z,1520532388.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:29.029Z,1520532389.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:29.052Z,1520532389.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T18:06:29.058Z,1520532389.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:29.422Z,1520532389.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:29.442Z,1520532389.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T18:06:29.443Z,1520532389.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:29.823Z,1520532389.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:29.838Z,1520532389.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T18:06:29.839Z,1520532389.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:30.237Z,1520532390.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:30.267Z,1520532390.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T18:06:30.268Z,1520532390.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:30.633Z,1520532390.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:30.648Z,1520532390.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T18:06:30.669Z,1520532390.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:31.033Z,1520532391.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:31.072Z,1520532391.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T18:06:31.073Z,1520532391.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:31.427Z,1520532391.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:31.446Z,1520532391.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T18:06:31.447Z,1520532391.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:31.826Z,1520532391.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:31.841Z,1520532391.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T18:06:31.842Z,1520532391.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:32.229Z,1520532392.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:32.250Z,1520532392.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T18:06:32.251Z,1520532392.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:32.627Z,1520532392.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:32.642Z,1520532392.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T18:06:32.643Z,1520532392.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:33.029Z,1520532393.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:33.044Z,1520532393.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T18:06:33.045Z,1520532393.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:33.427Z,1520532393.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:33.446Z,1520532393.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T18:06:33.447Z,1520532393.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:33.818Z,1520532393.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:33.833Z,1520532393.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T18:06:33.834Z,1520532393.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:34.225Z,1520532394.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:34.240Z,1520532394.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T18:06:34.241Z,1520532394.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:34.627Z,1520532394.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:34.646Z,1520532394.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T18:06:34.647Z,1520532394.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:35.030Z,1520532395.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:35.045Z,1520532395.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:35.423Z,1520532395.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:35.439Z,1520532395.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:35.826Z,1520532395.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:35.841Z,1520532395.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:36.232Z,1520532396.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:36.247Z,1520532396.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:36.629Z,1520532396.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:36.645Z,1520532396.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:37.029Z,1520532397.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:37.045Z,1520532397.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:37.422Z,1520532397.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:37.446Z,1520532397.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:37.826Z,1520532397.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:37.842Z,1520532397.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:38.229Z,1520532398.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:38.245Z,1520532398.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:38.629Z,1520532398.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:38.645Z,1520532398.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:39.030Z,1520532399.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:39.051Z,1520532399.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:39.427Z,1520532399.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:39.442Z,1520532399.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:39.817Z,1520532399.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:39.833Z,1520532399.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:40.229Z,1520532400.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:40.245Z,1520532400.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:40.632Z,1520532400.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:40.647Z,1520532400.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:41.032Z,1520532401.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:41.047Z,1520532401.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:41.417Z,1520532401.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:41.432Z,1520532401.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:41.819Z,1520532401.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:41.843Z,1520532401.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:42.226Z,1520532402.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:42.251Z,1520532402.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:42.634Z,1520532402.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:42.651Z,1520532402.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:43.033Z,1520532403.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:43.048Z,1520532403.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:43.424Z,1520532403.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:43.439Z,1520532403.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:43.822Z,1520532403.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:43.839Z,1520532403.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:44.235Z,1520532404.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:44.251Z,1520532404.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:44.632Z,1520532404.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:44.647Z,1520532404.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:45.034Z,1520532405.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:45.054Z,1520532405.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:45.430Z,1520532405.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:45.446Z,1520532405.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:45.820Z,1520532405.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:45.843Z,1520532405.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:46.238Z,1520532406.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:46.259Z,1520532406.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:46.638Z,1520532406.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:46.659Z,1520532406.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:47.038Z,1520532407.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:47.053Z,1520532407.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:47.427Z,1520532407.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:47.444Z,1520532407.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:47.815Z,1520532407.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:47.851Z,1520532407.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:48.234Z,1520532408.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:48.255Z,1520532408.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:48.637Z,1520532408.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:48.653Z,1520532408.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:49.031Z,1520532409.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:49.059Z,1520532409.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:49.419Z,1520532409.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:49.446Z,1520532409.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:49.819Z,1520532409.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:49.854Z,1520532409.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:50.237Z,1520532410.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:50.258Z,1520532410.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:50.629Z,1520532410.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:50.661Z,1520532410.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:51.058Z,1520532411.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:51.144Z,1520532411.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:51.414Z,1520532411.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:51.429Z,1520532411.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:51.821Z,1520532411.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:51.854Z,1520532411.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:52.222Z,1520532412.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:52.238Z,1520532412.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:52.624Z,1520532412.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:52.639Z,1520532412.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:53.020Z,1520532413.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:53.035Z,1520532413.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:53.424Z,1520532413.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:53.440Z,1520532413.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:53.833Z,1520532413.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:53.866Z,1520532413.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:54.237Z,1520532414.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:54.261Z,1520532414.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:54.620Z,1520532414.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:54.642Z,1520532414.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:55.023Z,1520532415.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:55.039Z,1520532415.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:55.424Z,1520532415.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:55.440Z,1520532415.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:55.822Z,1520532415.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:55.845Z,1520532415.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:56.241Z,1520532416.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:56.276Z,1520532416.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:56.638Z,1520532416.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:56.671Z,1520532416.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:59.733Z,1520532419.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:59.749Z,1520532419.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:06:59.845Z,1520532419.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:06:59.878Z,1520532419.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:00.239Z,1520532420.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:00.262Z,1520532420.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:00.636Z,1520532420.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:00.651Z,1520532420.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:01.029Z,1520532421.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:01.050Z,1520532421.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:01.446Z,1520532421.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:01.473Z,1520532421.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:01.849Z,1520532421.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:01.864Z,1520532421.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:02.241Z,1520532422.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:02.262Z,1520532422.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:02.638Z,1520532422.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:02.654Z,1520532422.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:03.042Z,1520532423.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:03.057Z,1520532423.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:03.435Z,1520532423.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:03.450Z,1520532423.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:03.841Z,1520532423.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:03.856Z,1520532423.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:04.241Z,1520532424.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:04.256Z,1520532424.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:04.642Z,1520532424.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:04.661Z,1520532424.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:05.046Z,1520532425.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:05.067Z,1520532425.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:05.439Z,1520532425.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:05.454Z,1520532425.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:05.828Z,1520532425.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:05.859Z,1520532425.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:06.243Z,1520532426.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:06.258Z,1520532426.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:06.644Z,1520532426.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:06.659Z,1520532426.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:07.039Z,1520532427.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:07.058Z,1520532427.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:07.444Z,1520532427.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:07.459Z,1520532427.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:07.846Z,1520532427.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:07.861Z,1520532427.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:08.245Z,1520532428.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:08.261Z,1520532428.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:08.640Z,1520532428.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:08.655Z,1520532428.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:09.039Z,1520532429.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:09.054Z,1520532429.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:09.443Z,1520532429.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:09.458Z,1520532429.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:09.839Z,1520532429.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:09.855Z,1520532429.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:10.245Z,1520532430.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:10.260Z,1520532430.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:10.642Z,1520532430.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:10.666Z,1520532430.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:11.045Z,1520532431.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:11.060Z,1520532431.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:11.440Z,1520532431.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:11.455Z,1520532431.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:11.824Z,1520532431.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:11.854Z,1520532431.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:12.238Z,1520532432.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:12.258Z,1520532432.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:12.644Z,1520532432.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:12.659Z,1520532432.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:13.039Z,1520532433.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:13.055Z,1520532433.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:13.449Z,1520532433.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:13.471Z,1520532433.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:13.848Z,1520532433.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:13.863Z,1520532433.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:14.249Z,1520532434.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:14.264Z,1520532434.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:14.637Z,1520532434.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:14.653Z,1520532434.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:15.036Z,1520532435.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:15.051Z,1520532435.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:15.439Z,1520532435.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:15.455Z,1520532435.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:15.837Z,1520532435.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:15.852Z,1520532435.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:16.250Z,1520532436.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:16.265Z,1520532436.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:16.644Z,1520532436.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:16.660Z,1520532436.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:17.048Z,1520532437.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:17.064Z,1520532437.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:17.443Z,1520532437.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:17.458Z,1520532437.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:17.824Z,1520532437.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:17.859Z,1520532437.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:18.230Z,1520532438.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:18.257Z,1520532438.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:18.627Z,1520532438.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:18.655Z,1520532438.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:19.042Z,1520532439.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:19.057Z,1520532439.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:19.449Z,1520532439.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:19.465Z,1520532439.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:19.849Z,1520532439.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:19.864Z,1520532439.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:20.251Z,1520532440.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:20.266Z,1520532440.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:20.629Z,1520532440.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:20.663Z,1520532440.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:21.029Z,1520532441.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:21.064Z,1520532441.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:21.431Z,1520532441.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:21.458Z,1520532441.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:21.826Z,1520532441.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:21.853Z,1520532441.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:22.243Z,1520532442.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:22.266Z,1520532442.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:22.645Z,1520532442.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:22.661Z,1520532442.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:23.054Z,1520532443.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:23.069Z,1520532443.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:23.427Z,1520532443.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:23.454Z,1520532443.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:23.825Z,1520532443.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:23.851Z,1520532443.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:24.229Z,1520532444.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:24.255Z,1520532444.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:24.627Z,1520532444.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:24.659Z,1520532444.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:25.032Z,1520532445.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:25.058Z,1520532445.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:25.446Z,1520532445.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:25.461Z,1520532445.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:25.854Z,1520532445.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:25.869Z,1520532445.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:26.251Z,1520532446.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:26.266Z,1520532446.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:26.630Z,1520532446.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:26.663Z,1520532446.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:27.043Z,1520532447.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:27.059Z,1520532447.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:27.432Z,1520532447.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:27.459Z,1520532447.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:27.830Z,1520532447.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:27.857Z,1520532447.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:28.250Z,1520532448.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:28.265Z,1520532448.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:28.640Z,1520532448.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:28.686Z,1520532448.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:29.054Z,1520532449.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:29.070Z,1520532449.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:29.431Z,1520532449.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:29.466Z,1520532449.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:29.826Z,1520532449.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:29.841Z,1520532449.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:30.236Z,1520532450.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:30.251Z,1520532450.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:30.636Z,1520532450.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:30.651Z,1520532450.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:31.032Z,1520532451.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:31.048Z,1520532451.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:31.450Z,1520532451.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:31.473Z,1520532451.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:31.846Z,1520532451.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:31.875Z,1520532451.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:32.245Z,1520532452.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:32.276Z,1520532452.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:32.632Z,1520532452.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:32.647Z,1520532452.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:33.034Z,1520532453.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:33.049Z,1520532453.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:33.430Z,1520532453.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:33.457Z,1520532453.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:33.837Z,1520532453.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:33.853Z,1520532453.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:34.249Z,1520532454.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:34.264Z,1520532454.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:34.637Z,1520532454.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:34.652Z,1520532454.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:35.039Z,1520532455.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:35.059Z,1520532455.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:35.437Z,1520532455.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:35.452Z,1520532455.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:35.828Z,1520532455.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:35.856Z,1520532455.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:36.239Z,1520532456.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:36.254Z,1520532456.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:36.636Z,1520532456.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:36.652Z,1520532456.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:37.033Z,1520532457.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:37.049Z,1520532457.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:37.445Z,1520532457.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:37.461Z,1520532457.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:37.845Z,1520532457.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:37.860Z,1520532457.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:38.244Z,1520532458.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:38.267Z,1520532458.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:38.640Z,1520532458.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:38.656Z,1520532458.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:39.036Z,1520532459.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:39.051Z,1520532459.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:39.435Z,1520532459.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:39.456Z,1520532459.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:39.836Z,1520532459.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:39.859Z,1520532459.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:40.250Z,1520532460.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:40.265Z,1520532460.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:40.643Z,1520532460.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:40.667Z,1520532460.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:41.050Z,1520532461.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:41.065Z,1520532461.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:41.429Z,1520532461.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:41.459Z,1520532461.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:41.828Z,1520532461.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:41.863Z,1520532461.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:42.232Z,1520532462.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:42.271Z,1520532462.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:42.629Z,1520532462.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:42.668Z,1520532462.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:43.032Z,1520532463.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:43.072Z,1520532463.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:43.443Z,1520532463.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:43.479Z,1520532463.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:43.851Z,1520532463.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:43.894Z,1520532463.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:44.238Z,1520532464.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:44.253Z,1520532464.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:44.635Z,1520532464.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:44.667Z,1520532464.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:45.049Z,1520532465.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:45.100Z,1520532465.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:45.438Z,1520532465.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:45.487Z,1520532465.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:45.835Z,1520532465.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:45.850Z,1520532465.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:46.245Z,1520532466.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:46.260Z,1520532466.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:46.641Z,1520532466.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:46.657Z,1520532466.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:47.041Z,1520532467.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:47.057Z,1520532467.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:47.435Z,1520532467.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:47.451Z,1520532467.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:47.828Z,1520532467.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:47.866Z,1520532467.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:48.240Z,1520532468.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:48.255Z,1520532468.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:48.640Z,1520532468.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:48.655Z,1520532468.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:49.040Z,1520532469.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:49.055Z,1520532469.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:49.446Z,1520532469.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:49.466Z,1520532469.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:49.844Z,1520532469.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:49.859Z,1520532469.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:50.244Z,1520532470.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:50.259Z,1520532470.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:50.639Z,1520532470.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:50.654Z,1520532470.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:51.044Z,1520532471.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:51.059Z,1520532471.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:51.431Z,1520532471.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:51.453Z,1520532471.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:51.842Z,1520532471.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:51.862Z,1520532471.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:52.262Z,1520532472.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:52.290Z,1520532472.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:52.644Z,1520532472.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:52.666Z,1520532472.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:53.045Z,1520532473.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:53.060Z,1520532473.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:53.440Z,1520532473.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:53.456Z,1520532473.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:53.828Z,1520532473.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:53.859Z,1520532473.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:54.238Z,1520532474.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:54.253Z,1520532474.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:54.637Z,1520532474.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:54.665Z,1520532474.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:55.039Z,1520532475.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:55.054Z,1520532475.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:55.444Z,1520532475.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:55.466Z,1520532475.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:55.851Z,1520532475.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:55.870Z,1520532475.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:56.248Z,1520532476.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:56.270Z,1520532476.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:56.639Z,1520532476.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:56.658Z,1520532476.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:07:57.040Z,1520532477.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:07:57.056Z,1520532477.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:00.147Z,1520532480.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:00.163Z,1520532480.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:00.257Z,1520532480.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:00.272Z,1520532480.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:00.658Z,1520532480.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:00.696Z,1520532480.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:01.053Z,1520532481.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:01.068Z,1520532481.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:01.453Z,1520532481.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:01.468Z,1520532481.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:01.837Z,1520532481.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:01.865Z,1520532481.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:02.246Z,1520532482.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:02.261Z,1520532482.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:02.648Z,1520532482.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:02.664Z,1520532482.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:03.048Z,1520532483.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:03.063Z,1520532483.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:03.453Z,1520532483.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:03.469Z,1520532483.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:03.854Z,1520532483.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:03.873Z,1520532483.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:04.253Z,1520532484.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:04.275Z,1520532484.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:04.643Z,1520532484.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:04.662Z,1520532484.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:05.031Z,1520532485.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:05.067Z,1520532485.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:05.449Z,1520532485.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:05.465Z,1520532485.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:05.832Z,1520532485.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:05.860Z,1520532485.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:06.255Z,1520532486.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:06.270Z,1520532486.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:06.651Z,1520532486.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:06.670Z,1520532486.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:07.049Z,1520532487.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:07.072Z,1520532487.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:07.434Z,1520532487.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:07.471Z,1520532487.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:07.837Z,1520532487.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:07.868Z,1520532487.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:08.235Z,1520532488.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:08.270Z,1520532488.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:08.642Z,1520532488.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:08.676Z,1520532488.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:09.039Z,1520532489.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:09.055Z,1520532489.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:09.450Z,1520532489.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:09.482Z,1520532489.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:09.850Z,1520532489.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:09.882Z,1520532489.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:10.253Z,1520532490.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:10.281Z,1520532490.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:10.639Z,1520532490.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:10.655Z,1520532490.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:11.040Z,1520532491.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:11.056Z,1520532491.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:11.440Z,1520532491.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:11.455Z,1520532491.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:11.843Z,1520532491.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:11.859Z,1520532491.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:12.254Z,1520532492.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:12.285Z,1520532492.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:12.649Z,1520532492.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:12.664Z,1520532492.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:13.053Z,1520532493.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:13.089Z,1520532493.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:13.446Z,1520532493.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:13.466Z,1520532493.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:13.843Z,1520532493.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:13.858Z,1520532493.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:14.242Z,1520532494.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:14.259Z,1520532494.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:14.641Z,1520532494.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:14.657Z,1520532494.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:15.048Z,1520532495.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:15.063Z,1520532495.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:15.445Z,1520532495.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:15.461Z,1520532495.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:15.849Z,1520532495.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:15.864Z,1520532495.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:16.245Z,1520532496.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:16.266Z,1520532496.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:16.647Z,1520532496.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:16.663Z,1520532496.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:17.043Z,1520532497.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:17.058Z,1520532497.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:17.440Z,1520532497.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:17.455Z,1520532497.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:17.843Z,1520532497.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:17.858Z,1520532497.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:18.246Z,1520532498.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:18.262Z,1520532498.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:18.649Z,1520532498.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:18.664Z,1520532498.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:19.046Z,1520532499.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:19.062Z,1520532499.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:19.439Z,1520532499.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:19.454Z,1520532499.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:19.847Z,1520532499.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:19.862Z,1520532499.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:20.241Z,1520532500.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:20.256Z,1520532500.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:20.642Z,1520532500.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:20.662Z,1520532500.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:21.039Z,1520532501.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:21.054Z,1520532501.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:21.449Z,1520532501.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:21.465Z,1520532501.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:21.849Z,1520532501.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:21.865Z,1520532501.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:22.245Z,1520532502.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:22.266Z,1520532502.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:22.636Z,1520532502.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:22.651Z,1520532502.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:23.046Z,1520532503.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:23.062Z,1520532503.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:23.443Z,1520532503.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:23.458Z,1520532503.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:23.842Z,1520532503.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:23.858Z,1520532503.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:24.244Z,1520532504.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:24.259Z,1520532504.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:24.649Z,1520532504.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:24.664Z,1520532504.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:25.049Z,1520532505.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:25.070Z,1520532505.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:25.443Z,1520532505.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:25.458Z,1520532505.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:25.839Z,1520532505.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:25.854Z,1520532505.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:26.245Z,1520532506.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:26.261Z,1520532506.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:26.645Z,1520532506.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:26.660Z,1520532506.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:27.039Z,1520532507.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:27.054Z,1520532507.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:27.449Z,1520532507.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:27.464Z,1520532507.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:27.849Z,1520532507.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:27.865Z,1520532507.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:28.248Z,1520532508.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:28.263Z,1520532508.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:28.643Z,1520532508.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:28.659Z,1520532508.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:29.039Z,1520532509.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:29.054Z,1520532509.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:29.447Z,1520532509.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:29.462Z,1520532509.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:29.843Z,1520532509.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:29.863Z,1520532509.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:30.248Z,1520532510.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:30.264Z,1520532510.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:30.652Z,1520532510.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:30.667Z,1520532510.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:31.052Z,1520532511.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:31.067Z,1520532511.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:31.444Z,1520532511.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:31.459Z,1520532511.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:31.840Z,1520532511.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:31.855Z,1520532511.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:32.243Z,1520532512.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:32.259Z,1520532512.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:32.641Z,1520532512.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:32.657Z,1520532512.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:33.040Z,1520532513.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:33.055Z,1520532513.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:33.453Z,1520532513.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:33.475Z,1520532513.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:33.852Z,1520532513.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:33.867Z,1520532513.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:34.253Z,1520532514.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:34.274Z,1520532514.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:34.642Z,1520532514.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:34.657Z,1520532514.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:35.047Z,1520532515.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:35.066Z,1520532515.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:35.444Z,1520532515.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:35.459Z,1520532515.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:35.846Z,1520532515.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:35.861Z,1520532515.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:36.253Z,1520532516.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:36.268Z,1520532516.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:36.652Z,1520532516.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:36.667Z,1520532516.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:37.053Z,1520532517.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:37.068Z,1520532517.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:37.446Z,1520532517.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:37.461Z,1520532517.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:37.841Z,1520532517.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:37.855Z,1520532517.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:38.243Z,1520532518.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:38.266Z,1520532518.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:38.643Z,1520532518.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:38.659Z,1520532518.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:39.043Z,1520532519.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:39.058Z,1520532519.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:39.452Z,1520532519.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:39.467Z,1520532519.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:39.852Z,1520532519.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:39.875Z,1520532519.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:40.253Z,1520532520.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:40.268Z,1520532520.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:40.646Z,1520532520.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:40.661Z,1520532520.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:41.041Z,1520532521.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:41.056Z,1520532521.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:41.440Z,1520532521.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:41.455Z,1520532521.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:41.839Z,1520532521.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:41.855Z,1520532521.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:42.250Z,1520532522.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:42.265Z,1520532522.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:42.652Z,1520532522.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:42.667Z,1520532522.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:43.054Z,1520532523.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:43.069Z,1520532523.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:43.443Z,1520532523.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:43.459Z,1520532523.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:43.843Z,1520532523.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:43.858Z,1520532523.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:44.243Z,1520532524.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:44.262Z,1520532524.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:44.648Z,1520532524.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:44.663Z,1520532524.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:45.041Z,1520532525.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:45.057Z,1520532525.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:45.453Z,1520532525.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:45.468Z,1520532525.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:45.894Z,1520532525.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:45.911Z,1520532525.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:46.254Z,1520532526.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:46.269Z,1520532526.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:46.633Z,1520532526.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:46.660Z,1520532526.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:47.034Z,1520532527.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:47.071Z,1520532527.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:47.433Z,1520532527.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:47.480Z,1520532527.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:47.836Z,1520532527.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:47.851Z,1520532527.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:48.249Z,1520532528.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:48.282Z,1520532528.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:48.657Z,1520532528.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:48.684Z,1520532528.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:49.050Z,1520532529.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:49.079Z,1520532529.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:49.448Z,1520532529.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:49.479Z,1520532529.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:49.836Z,1520532529.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:49.852Z,1520532529.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:50.241Z,1520532530.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:50.257Z,1520532530.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:50.637Z,1520532530.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:50.659Z,1520532530.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:51.036Z,1520532531.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:51.051Z,1520532531.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:51.441Z,1520532531.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:51.457Z,1520532531.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:51.849Z,1520532531.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:51.877Z,1520532531.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:52.242Z,1520532532.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:52.257Z,1520532532.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:52.635Z,1520532532.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:52.658Z,1520532532.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:53.041Z,1520532533.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:53.056Z,1520532533.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:53.448Z,1520532533.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:53.463Z,1520532533.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:53.837Z,1520532533.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:53.852Z,1520532533.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:54.257Z,1520532534.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:54.292Z,1520532534.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:54.650Z,1520532534.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:54.665Z,1520532534.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:55.050Z,1520532535.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:55.070Z,1520532535.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:55.443Z,1520532535.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:55.458Z,1520532535.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:55.844Z,1520532535.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:55.859Z,1520532535.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:56.243Z,1520532536.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:56.266Z,1520532536.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:56.647Z,1520532536.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:56.663Z,1520532536.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:08:57.046Z,1520532537.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:08:57.061Z,1520532537.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:00.146Z,1520532540.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:00.162Z,1520532540.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:00.277Z,1520532540.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:00.311Z,1520532540.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:00.629Z,1520532540.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:00.663Z,1520532540.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:01.015Z,1520532541.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:01.030Z,1520532541.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:01.414Z,1520532541.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:01.450Z,1520532541.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:01.816Z,1520532541.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:01.832Z,1520532541.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:02.225Z,1520532542.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:02.240Z,1520532542.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:02.629Z,1520532542.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:02.660Z,1520532542.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:03.024Z,1520532543.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:03.039Z,1520532543.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:03.419Z,1520532543.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:03.434Z,1520532543.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:03.820Z,1520532543.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:03.835Z,1520532543.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:04.230Z,1520532544.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:04.263Z,1520532544.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:04.624Z,1520532544.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:04.639Z,1520532544.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:05.030Z,1520532545.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:05.062Z,1520532545.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:05.416Z,1520532545.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:05.439Z,1520532545.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:05.817Z,1520532545.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:05.832Z,1520532545.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:06.232Z,1520532546.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:06.263Z,1520532546.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:06.627Z,1520532546.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:06.646Z,1520532546.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:07.030Z,1520532547.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:07.045Z,1520532547.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:07.421Z,1520532547.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:07.437Z,1520532547.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:07.815Z,1520532547.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:07.834Z,1520532547.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:08.233Z,1520532548.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:08.249Z,1520532548.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:08.628Z,1520532548.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:08.643Z,1520532548.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:09.029Z,1520532549.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:09.044Z,1520532549.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:09.417Z,1520532549.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:09.436Z,1520532549.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:09.820Z,1520532549.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:09.836Z,1520532549.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:10.229Z,1520532550.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:10.250Z,1520532550.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:10.628Z,1520532550.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:10.643Z,1520532550.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:11.033Z,1520532551.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:11.048Z,1520532551.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:11.423Z,1520532551.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:11.446Z,1520532551.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:11.822Z,1520532551.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:11.837Z,1520532551.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:12.245Z,1520532552.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:12.281Z,1520532552.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:12.638Z,1520532552.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:12.653Z,1520532552.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:13.032Z,1520532553.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:13.048Z,1520532553.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:13.421Z,1520532553.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:13.440Z,1520532553.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:13.810Z,1520532553.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:13.843Z,1520532553.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:14.233Z,1520532554.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:14.262Z,1520532554.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:14.635Z,1520532554.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:14.650Z,1520532554.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:15.030Z,1520532555.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:15.045Z,1520532555.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:15.409Z,1520532555.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:15.439Z,1520532555.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:15.808Z,1520532555.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:15.843Z,1520532555.843 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:15.843Z,1520532555.843 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 208
2018-03-08T18:09:15.843Z,1520532555.843 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T18:09:15.845Z,1520532555.845 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:15.845Z,1520532555.845 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 208
2018-03-08T18:09:15.845Z,1520532555.845 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T18:09:15.847Z,1520532555.847 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:15.847Z,1520532555.847 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 208
2018-03-08T18:09:15.847Z,1520532555.847 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T18:09:15.859Z,1520532555.859 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T18:09:15.859Z,1520532555.859 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T18:09:15.859Z,1520532555.859 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T18:09:16.237Z,1520532556.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:16.263Z,1520532556.263 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T18:09:16.263Z,1520532556.263 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 208
2018-03-08T18:09:16.263Z,1520532556.263 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T18:09:16.263Z,1520532556.263 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 208
2018-03-08T18:09:16.264Z,1520532556.264 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T18:09:16.264Z,1520532556.264 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 208
2018-03-08T18:09:16.630Z,1520532556.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:16.644Z,1520532556.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T18:09:16.645Z,1520532556.645 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:09:16.645Z,1520532556.645 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:09:16.645Z,1520532556.645 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T18:09:16.646Z,1520532556.646 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:09:16.646Z,1520532556.646 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:09:16.646Z,1520532556.646 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T18:09:16.647Z,1520532556.647 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:09:16.647Z,1520532556.647 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:09:17.033Z,1520532557.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:17.048Z,1520532557.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T18:09:17.049Z,1520532557.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:17.422Z,1520532557.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:17.447Z,1520532557.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T18:09:17.448Z,1520532557.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:17.816Z,1520532557.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:17.843Z,1520532557.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T18:09:17.844Z,1520532557.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:18.251Z,1520532558.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:18.270Z,1520532558.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T18:09:18.271Z,1520532558.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:18.625Z,1520532558.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:18.654Z,1520532558.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T18:09:18.655Z,1520532558.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:19.027Z,1520532559.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:19.054Z,1520532559.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T18:09:19.055Z,1520532559.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:19.412Z,1520532559.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:19.436Z,1520532559.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T18:09:19.437Z,1520532559.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:19.818Z,1520532559.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:19.853Z,1520532559.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T18:09:19.854Z,1520532559.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:20.229Z,1520532560.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:20.261Z,1520532560.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T18:09:20.261Z,1520532560.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:20.629Z,1520532560.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:20.654Z,1520532560.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T18:09:20.655Z,1520532560.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:21.027Z,1520532561.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:21.056Z,1520532561.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T18:09:21.057Z,1520532561.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:21.422Z,1520532561.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:21.436Z,1520532561.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T18:09:21.461Z,1520532561.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:21.809Z,1520532561.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:21.831Z,1520532561.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T18:09:21.832Z,1520532561.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:22.228Z,1520532562.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:22.262Z,1520532562.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T18:09:22.263Z,1520532562.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:22.627Z,1520532562.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:22.659Z,1520532562.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T18:09:22.660Z,1520532562.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:23.029Z,1520532563.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:23.053Z,1520532563.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T18:09:23.054Z,1520532563.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:23.419Z,1520532563.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:23.434Z,1520532563.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T18:09:23.435Z,1520532563.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:23.812Z,1520532563.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:23.859Z,1520532563.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T18:09:23.860Z,1520532563.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:24.228Z,1520532564.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:24.330Z,1520532564.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-08T18:09:24.331Z,1520532564.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:24.626Z,1520532564.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:24.657Z,1520532564.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T18:09:24.658Z,1520532564.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:25.030Z,1520532565.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:25.067Z,1520532565.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T18:09:25.068Z,1520532565.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:25.417Z,1520532565.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:25.442Z,1520532565.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T18:09:25.443Z,1520532565.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:25.822Z,1520532565.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:25.838Z,1520532565.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T18:09:25.839Z,1520532565.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:26.225Z,1520532566.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:26.241Z,1520532566.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T18:09:26.242Z,1520532566.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:26.621Z,1520532566.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:26.645Z,1520532566.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T18:09:26.646Z,1520532566.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:27.027Z,1520532567.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:27.042Z,1520532567.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T18:09:27.043Z,1520532567.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:27.421Z,1520532567.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:27.435Z,1520532567.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T18:09:27.436Z,1520532567.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:27.809Z,1520532567.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:27.841Z,1520532567.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T18:09:27.842Z,1520532567.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:28.229Z,1520532568.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:28.244Z,1520532568.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T18:09:28.245Z,1520532568.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:28.632Z,1520532568.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:28.647Z,1520532568.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T18:09:28.647Z,1520532568.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:29.029Z,1520532569.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:29.044Z,1520532569.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T18:09:29.045Z,1520532569.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:29.422Z,1520532569.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:29.437Z,1520532569.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T18:09:29.438Z,1520532569.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:29.821Z,1520532569.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:29.836Z,1520532569.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T18:09:29.837Z,1520532569.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:30.242Z,1520532570.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:30.277Z,1520532570.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T18:09:30.278Z,1520532570.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:30.635Z,1520532570.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:30.650Z,1520532570.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T18:09:30.651Z,1520532570.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:31.030Z,1520532571.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:31.045Z,1520532571.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T18:09:31.046Z,1520532571.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:31.419Z,1520532571.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:31.437Z,1520532571.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T18:09:31.438Z,1520532571.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:31.807Z,1520532571.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:31.838Z,1520532571.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T18:09:31.839Z,1520532571.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:32.234Z,1520532572.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:32.249Z,1520532572.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T18:09:32.250Z,1520532572.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:32.626Z,1520532572.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:32.654Z,1520532572.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T18:09:32.654Z,1520532572.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:33.035Z,1520532573.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:33.049Z,1520532573.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T18:09:33.050Z,1520532573.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:33.407Z,1520532573.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:33.440Z,1520532573.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T18:09:33.441Z,1520532573.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:33.804Z,1520532573.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:33.844Z,1520532573.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T18:09:33.845Z,1520532573.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:34.236Z,1520532574.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:34.251Z,1520532574.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T18:09:34.253Z,1520532574.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:34.629Z,1520532574.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:34.645Z,1520532574.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T18:09:34.645Z,1520532574.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:35.029Z,1520532575.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:35.048Z,1520532575.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T18:09:35.053Z,1520532575.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:35.414Z,1520532575.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:35.441Z,1520532575.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T18:09:35.442Z,1520532575.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:35.809Z,1520532575.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:35.838Z,1520532575.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T18:09:35.839Z,1520532575.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:36.233Z,1520532576.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:36.249Z,1520532576.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:36.658Z,1520532576.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:36.673Z,1520532576.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:37.024Z,1520532577.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:37.059Z,1520532577.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:37.419Z,1520532577.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:37.448Z,1520532577.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:37.817Z,1520532577.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:37.840Z,1520532577.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:38.227Z,1520532578.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:38.253Z,1520532578.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:38.620Z,1520532578.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:38.651Z,1520532578.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:39.029Z,1520532579.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:39.054Z,1520532579.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:39.415Z,1520532579.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:39.430Z,1520532579.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:39.812Z,1520532579.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:39.858Z,1520532579.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:40.230Z,1520532580.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:40.270Z,1520532580.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:40.629Z,1520532580.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:40.653Z,1520532580.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:41.029Z,1520532581.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:41.052Z,1520532581.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:41.414Z,1520532581.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:41.434Z,1520532581.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:41.818Z,1520532581.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:41.834Z,1520532581.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:42.225Z,1520532582.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:42.255Z,1520532582.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:42.633Z,1520532582.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:42.656Z,1520532582.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:43.032Z,1520532583.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:43.053Z,1520532583.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:43.416Z,1520532583.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:43.455Z,1520532583.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:43.814Z,1520532583.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:43.835Z,1520532583.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:44.229Z,1520532584.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:44.253Z,1520532584.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:44.620Z,1520532584.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:44.653Z,1520532584.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:45.030Z,1520532585.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:45.063Z,1520532585.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:45.451Z,1520532585.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:45.466Z,1520532585.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:45.837Z,1520532585.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:45.871Z,1520532585.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:46.222Z,1520532586.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:46.265Z,1520532586.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:46.627Z,1520532586.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:46.666Z,1520532586.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:47.025Z,1520532587.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:47.065Z,1520532587.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:47.420Z,1520532587.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:47.439Z,1520532587.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:47.815Z,1520532587.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:47.835Z,1520532587.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:48.224Z,1520532588.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:48.259Z,1520532588.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:48.653Z,1520532588.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:48.668Z,1520532588.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:49.021Z,1520532589.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:49.061Z,1520532589.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:49.414Z,1520532589.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:49.439Z,1520532589.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:49.817Z,1520532589.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:49.838Z,1520532589.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:50.233Z,1520532590.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:50.265Z,1520532590.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:50.621Z,1520532590.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:50.637Z,1520532590.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:51.031Z,1520532591.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:51.062Z,1520532591.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:51.419Z,1520532591.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:51.434Z,1520532591.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:51.821Z,1520532591.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:51.836Z,1520532591.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:52.229Z,1520532592.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:52.260Z,1520532592.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:52.628Z,1520532592.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:52.643Z,1520532592.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:53.021Z,1520532593.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:53.036Z,1520532593.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:53.423Z,1520532593.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:53.442Z,1520532593.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:53.820Z,1520532593.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:53.835Z,1520532593.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:54.203Z,1520532594.203 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T18:09:54.203Z,1520532594.203 [NAL9602] Data Fault, FailCount= 3
2018-03-08T18:09:54.204Z,1520532594.204 [NAL9602](ERROR): Data Fault
2018-03-08T18:09:54.223Z,1520532594.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:54.239Z,1520532594.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:54.273Z,1520532594.273 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T18:09:54.598Z,1520532594.598 [NAL9602](INFO): Powering down
2018-03-08T18:09:54.630Z,1520532594.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:54.653Z,1520532594.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:55.021Z,1520532595.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:55.036Z,1520532595.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:55.416Z,1520532595.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:55.431Z,1520532595.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:55.444Z,1520532595.444 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T18:09:55.445Z,1520532595.445 [NAL9602] No Fault, FailCount= 3
2018-03-08T18:09:55.820Z,1520532595.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:55.841Z,1520532595.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:56.216Z,1520532596.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:56.247Z,1520532596.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:56.250Z,1520532596.250 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T18:09:56.250Z,1520532596.250 [Default:CheckIn:C.Wait] Stopped
2018-03-08T18:09:56.250Z,1520532596.250 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T18:09:56.250Z,1520532596.250 [Default:CheckIn:D] Running Loop=1
2018-03-08T18:09:56.614Z,1520532596.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:56.630Z,1520532596.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:56.633Z,1520532596.633 [Default:CheckIn:D] Stopped
2018-03-08T18:09:56.633Z,1520532596.633 [Default:CheckIn:E] Running Loop=1
2018-03-08T18:09:57.027Z,1520532597.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:57.042Z,1520532597.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:09:57.045Z,1520532597.045 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 624.197135 min 
2018-03-08T18:09:57.046Z,1520532597.046 [Default:CheckIn:E] Stopped
2018-03-08T18:09:57.046Z,1520532597.046 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T18:09:57.046Z,1520532597.046 [Default:CheckIn] Stopped
2018-03-08T18:09:57.046Z,1520532597.046 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T18:09:57.046Z,1520532597.046 [Default:CheckIn](INFO): Running loop #61
2018-03-08T18:09:57.046Z,1520532597.046 [Default:CheckIn] Running Loop=61
2018-03-08T18:09:57.046Z,1520532597.046 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T18:09:57.046Z,1520532597.046 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T18:09:57.414Z,1520532597.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:09:57.434Z,1520532597.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:00.525Z,1520532600.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:00.542Z,1520532600.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:00.642Z,1520532600.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:00.676Z,1520532600.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:00.994Z,1520532600.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:01.030Z,1520532601.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:01.392Z,1520532601.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:01.423Z,1520532601.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:01.795Z,1520532601.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:01.822Z,1520532601.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:02.187Z,1520532602.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:02.230Z,1520532602.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:02.591Z,1520532602.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:02.629Z,1520532602.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:02.984Z,1520532602.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:03.011Z,1520532603.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:03.393Z,1520532603.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:03.430Z,1520532603.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:03.786Z,1520532603.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:03.833Z,1520532603.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:04.185Z,1520532604.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:04.200Z,1520532604.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:04.594Z,1520532604.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:04.629Z,1520532604.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:04.997Z,1520532604.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:05.032Z,1520532605.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:05.385Z,1520532605.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:05.431Z,1520532605.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:05.788Z,1520532605.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:05.804Z,1520532605.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:06.191Z,1520532606.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:06.214Z,1520532606.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:06.590Z,1520532606.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:06.611Z,1520532606.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:06.995Z,1520532606.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:07.042Z,1520532607.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:07.389Z,1520532607.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:07.404Z,1520532607.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:07.787Z,1520532607.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:07.809Z,1520532607.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:08.196Z,1520532608.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:08.223Z,1520532608.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:08.596Z,1520532608.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:08.638Z,1520532608.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:08.996Z,1520532608.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:09.017Z,1520532609.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:09.397Z,1520532609.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:09.417Z,1520532609.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:09.798Z,1520532609.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:09.814Z,1520532609.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:10.196Z,1520532610.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:10.239Z,1520532610.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:10.592Z,1520532610.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:10.623Z,1520532610.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:11.000Z,1520532611.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:11.018Z,1520532611.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:11.388Z,1520532611.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:11.412Z,1520532611.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:11.799Z,1520532611.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:11.843Z,1520532611.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:12.184Z,1520532612.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:12.222Z,1520532612.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:12.592Z,1520532612.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:12.612Z,1520532612.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:13.002Z,1520532613.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:13.017Z,1520532613.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:13.391Z,1520532613.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:13.443Z,1520532613.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:13.787Z,1520532613.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:13.808Z,1520532613.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:14.201Z,1520532614.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:14.218Z,1520532614.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:14.602Z,1520532614.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:14.617Z,1520532614.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:14.999Z,1520532614.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:15.042Z,1520532615.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:15.395Z,1520532615.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:15.416Z,1520532615.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:15.800Z,1520532615.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:15.818Z,1520532615.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:16.197Z,1520532616.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:16.213Z,1520532616.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:16.599Z,1520532616.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:16.642Z,1520532616.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:16.990Z,1520532616.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:17.006Z,1520532617.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:17.387Z,1520532617.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:17.411Z,1520532617.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:17.798Z,1520532617.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:17.813Z,1520532617.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:18.200Z,1520532618.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:18.242Z,1520532618.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:18.588Z,1520532618.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:18.604Z,1520532618.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:18.995Z,1520532618.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:19.015Z,1520532619.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:19.402Z,1520532619.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:19.417Z,1520532619.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:19.791Z,1520532619.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:19.840Z,1520532619.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:20.198Z,1520532620.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:20.219Z,1520532620.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:20.589Z,1520532620.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:20.619Z,1520532620.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:21.002Z,1520532621.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:21.018Z,1520532621.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:21.394Z,1520532621.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:21.429Z,1520532621.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:21.791Z,1520532621.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:21.808Z,1520532621.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:22.201Z,1520532622.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:22.219Z,1520532622.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:22.601Z,1520532622.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:22.616Z,1520532622.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:22.991Z,1520532622.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:23.015Z,1520532623.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:23.390Z,1520532623.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:23.419Z,1520532623.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:23.798Z,1520532623.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:23.816Z,1520532623.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:24.182Z,1520532624.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:24.218Z,1520532624.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:24.584Z,1520532624.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:24.629Z,1520532624.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:24.974Z,1520532624.974 [NAL9602](INFO): Powering up NAL9602
2018-03-08T18:10:25.004Z,1520532625.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:25.024Z,1520532625.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:25.382Z,1520532625.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:25.418Z,1520532625.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:25.795Z,1520532625.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:25.827Z,1520532625.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:26.199Z,1520532626.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:26.231Z,1520532626.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:26.598Z,1520532626.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:26.619Z,1520532626.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:27.001Z,1520532627.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:27.020Z,1520532627.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:27.387Z,1520532627.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:27.417Z,1520532627.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:27.787Z,1520532627.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:27.830Z,1520532627.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:28.199Z,1520532628.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:28.220Z,1520532628.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:28.586Z,1520532628.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:28.617Z,1520532628.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:28.987Z,1520532628.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:29.022Z,1520532629.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:29.384Z,1520532629.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:29.429Z,1520532629.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:29.799Z,1520532629.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:29.820Z,1520532629.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:30.186Z,1520532630.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:30.218Z,1520532630.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:30.584Z,1520532630.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:30.617Z,1520532630.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:30.990Z,1520532630.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:31.034Z,1520532631.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:31.384Z,1520532631.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:31.420Z,1520532631.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:31.780Z,1520532631.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:31.807Z,1520532631.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:32.193Z,1520532632.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:32.220Z,1520532632.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:32.590Z,1520532632.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:32.630Z,1520532632.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:32.990Z,1520532632.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:33.021Z,1520532633.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:33.386Z,1520532633.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:33.423Z,1520532633.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:33.793Z,1520532633.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:33.821Z,1520532633.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:34.184Z,1520532634.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:34.230Z,1520532634.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:34.591Z,1520532634.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:34.631Z,1520532634.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:34.990Z,1520532634.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:35.027Z,1520532635.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:35.384Z,1520532635.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:35.404Z,1520532635.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:35.805Z,1520532635.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:35.835Z,1520532635.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:36.176Z,1520532636.176 [NAL9602](INFO): NAL9602 initialized
2018-03-08T18:10:36.193Z,1520532636.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:36.234Z,1520532636.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:36.593Z,1520532636.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:36.635Z,1520532636.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:37.010Z,1520532637.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:37.047Z,1520532637.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:37.405Z,1520532637.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:37.446Z,1520532637.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:37.810Z,1520532637.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:37.838Z,1520532637.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:38.193Z,1520532638.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:38.242Z,1520532638.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:38.597Z,1520532638.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:38.638Z,1520532638.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:38.993Z,1520532638.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:39.038Z,1520532639.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:39.393Z,1520532639.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:39.412Z,1520532639.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:39.808Z,1520532639.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:39.840Z,1520532639.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:40.211Z,1520532640.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:40.246Z,1520532640.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:40.606Z,1520532640.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:40.650Z,1520532640.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:40.999Z,1520532640.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:41.020Z,1520532641.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:41.401Z,1520532641.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:41.420Z,1520532641.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:41.804Z,1520532641.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:41.826Z,1520532641.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:42.204Z,1520532642.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:42.239Z,1520532642.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:42.602Z,1520532642.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:42.646Z,1520532642.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:43.005Z,1520532643.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:43.040Z,1520532643.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:43.403Z,1520532643.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:43.419Z,1520532643.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:43.805Z,1520532643.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:43.847Z,1520532643.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:44.206Z,1520532644.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:44.249Z,1520532644.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:44.608Z,1520532644.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:44.623Z,1520532644.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:45.005Z,1520532645.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:45.021Z,1520532645.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:45.401Z,1520532645.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:45.442Z,1520532645.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:45.801Z,1520532645.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:45.821Z,1520532645.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:46.209Z,1520532646.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:46.224Z,1520532646.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:46.610Z,1520532646.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:46.647Z,1520532646.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:46.987Z,1520532646.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:47.040Z,1520532647.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:47.399Z,1520532647.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:47.420Z,1520532647.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:47.807Z,1520532647.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:47.848Z,1520532647.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:48.213Z,1520532648.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:48.228Z,1520532648.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:48.604Z,1520532648.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:48.645Z,1520532648.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:49.001Z,1520532649.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:49.021Z,1520532649.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:49.400Z,1520532649.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:49.419Z,1520532649.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:49.808Z,1520532649.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:49.824Z,1520532649.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:50.205Z,1520532650.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:50.247Z,1520532650.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:50.604Z,1520532650.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:50.624Z,1520532650.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:50.998Z,1520532650.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:51.017Z,1520532651.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:51.404Z,1520532651.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:51.419Z,1520532651.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:51.805Z,1520532651.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:51.845Z,1520532651.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:52.205Z,1520532652.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:52.225Z,1520532652.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:52.607Z,1520532652.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:52.626Z,1520532652.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:52.997Z,1520532652.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:53.014Z,1520532653.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:53.391Z,1520532653.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:53.427Z,1520532653.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:53.805Z,1520532653.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:53.825Z,1520532653.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:54.209Z,1520532654.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:54.224Z,1520532654.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:54.605Z,1520532654.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:54.620Z,1520532654.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:54.997Z,1520532654.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:55.029Z,1520532655.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:55.399Z,1520532655.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:55.419Z,1520532655.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:55.809Z,1520532655.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:55.832Z,1520532655.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:56.213Z,1520532656.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:56.234Z,1520532656.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:56.609Z,1520532656.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:56.649Z,1520532656.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:56.983Z,1520532656.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:57.026Z,1520532657.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:57.399Z,1520532657.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:57.417Z,1520532657.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:10:57.813Z,1520532657.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:10:57.829Z,1520532657.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:00.905Z,1520532660.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:00.921Z,1520532660.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:01.033Z,1520532661.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:01.058Z,1520532661.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:01.379Z,1520532661.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:01.410Z,1520532661.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:01.767Z,1520532661.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:01.782Z,1520532661.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:02.172Z,1520532662.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:02.194Z,1520532662.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:02.576Z,1520532662.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:02.598Z,1520532662.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:02.989Z,1520532662.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:03.004Z,1520532663.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:03.377Z,1520532663.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:03.392Z,1520532663.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:03.777Z,1520532663.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:03.793Z,1520532663.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:04.176Z,1520532664.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:04.197Z,1520532664.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:04.568Z,1520532664.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:04.594Z,1520532664.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:04.977Z,1520532664.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:04.992Z,1520532664.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:05.376Z,1520532665.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:05.391Z,1520532665.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:05.777Z,1520532665.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:05.798Z,1520532665.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:06.190Z,1520532666.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:06.222Z,1520532666.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:06.585Z,1520532666.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:06.607Z,1520532666.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:06.973Z,1520532666.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:06.989Z,1520532666.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:07.366Z,1520532667.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:07.412Z,1520532667.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:07.791Z,1520532667.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:07.806Z,1520532667.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:08.194Z,1520532668.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:08.213Z,1520532668.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:08.577Z,1520532668.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:08.615Z,1520532668.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:08.969Z,1520532668.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:08.984Z,1520532668.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:09.370Z,1520532669.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:09.385Z,1520532669.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:09.789Z,1520532669.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:09.818Z,1520532669.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:10.193Z,1520532670.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:10.224Z,1520532670.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:10.574Z,1520532670.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:10.614Z,1520532670.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:10.976Z,1520532670.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:10.991Z,1520532670.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:11.376Z,1520532671.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:11.391Z,1520532671.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:11.777Z,1520532671.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:11.793Z,1520532671.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:12.195Z,1520532672.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:12.220Z,1520532672.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:12.581Z,1520532672.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:12.627Z,1520532672.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:12.974Z,1520532672.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:12.993Z,1520532672.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:13.374Z,1520532673.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:13.393Z,1520532673.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:13.791Z,1520532673.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:13.824Z,1520532673.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:14.179Z,1520532674.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:14.218Z,1520532674.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:14.589Z,1520532674.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:14.604Z,1520532674.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:14.979Z,1520532674.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:15.001Z,1520532675.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:15.363Z,1520532675.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:15.405Z,1520532675.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:15.785Z,1520532675.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:15.811Z,1520532675.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:16.189Z,1520532676.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:16.204Z,1520532676.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:16.582Z,1520532676.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:16.607Z,1520532676.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:16.980Z,1520532676.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:17.001Z,1520532677.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:17.380Z,1520532677.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:17.395Z,1520532677.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:17.786Z,1520532677.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:17.802Z,1520532677.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:18.189Z,1520532678.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:18.210Z,1520532678.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:18.592Z,1520532678.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:18.610Z,1520532678.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:18.973Z,1520532678.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:19.006Z,1520532679.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:19.380Z,1520532679.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:19.402Z,1520532679.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:19.790Z,1520532679.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:19.810Z,1520532679.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:20.191Z,1520532680.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:20.209Z,1520532680.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:20.589Z,1520532680.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:20.634Z,1520532680.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:20.977Z,1520532680.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:20.993Z,1520532680.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:21.365Z,1520532681.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:21.396Z,1520532681.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:21.792Z,1520532681.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:21.809Z,1520532681.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:22.191Z,1520532682.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:22.215Z,1520532682.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:22.582Z,1520532682.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:22.610Z,1520532682.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:22.971Z,1520532682.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:23.003Z,1520532683.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:23.370Z,1520532683.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:23.404Z,1520532683.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:23.782Z,1520532683.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:23.822Z,1520532683.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:24.190Z,1520532684.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:24.215Z,1520532684.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:24.595Z,1520532684.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:24.614Z,1520532684.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:24.965Z,1520532684.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:25.001Z,1520532685.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:25.366Z,1520532685.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:25.393Z,1520532685.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:25.787Z,1520532685.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:25.815Z,1520532685.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:26.193Z,1520532686.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:26.214Z,1520532686.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:26.593Z,1520532686.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:26.610Z,1520532686.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:26.971Z,1520532686.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:27.011Z,1520532687.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:27.361Z,1520532687.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:27.384Z,1520532687.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:27.785Z,1520532687.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:27.809Z,1520532687.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:28.197Z,1520532688.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:28.213Z,1520532688.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:28.582Z,1520532688.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:28.638Z,1520532688.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:28.971Z,1520532688.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:28.998Z,1520532688.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:29.371Z,1520532689.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:29.403Z,1520532689.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:29.785Z,1520532689.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:29.809Z,1520532689.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:30.187Z,1520532690.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:30.235Z,1520532690.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:30.594Z,1520532690.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:30.614Z,1520532690.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:30.965Z,1520532690.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:30.997Z,1520532690.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:31.367Z,1520532691.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:31.408Z,1520532691.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:31.791Z,1520532691.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:31.806Z,1520532691.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:32.193Z,1520532692.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:32.212Z,1520532692.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:32.590Z,1520532692.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:32.610Z,1520532692.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:32.967Z,1520532692.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:33.006Z,1520532693.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:33.368Z,1520532693.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:33.405Z,1520532693.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:33.791Z,1520532693.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:33.807Z,1520532693.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:34.195Z,1520532694.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:34.222Z,1520532694.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:34.577Z,1520532694.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:34.611Z,1520532694.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:34.975Z,1520532694.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:35.007Z,1520532695.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:35.368Z,1520532695.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:35.383Z,1520532695.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:35.781Z,1520532695.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:35.817Z,1520532695.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:36.191Z,1520532696.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:36.216Z,1520532696.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:36.585Z,1520532696.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:36.621Z,1520532696.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:36.973Z,1520532696.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:36.988Z,1520532696.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:37.374Z,1520532697.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:37.394Z,1520532697.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:37.790Z,1520532697.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:37.825Z,1520532697.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:38.179Z,1520532698.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:38.218Z,1520532698.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:38.577Z,1520532698.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:38.593Z,1520532698.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:38.974Z,1520532698.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:39.004Z,1520532699.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:39.367Z,1520532699.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:39.400Z,1520532699.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:39.781Z,1520532699.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:39.797Z,1520532699.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:40.181Z,1520532700.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:40.198Z,1520532700.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:40.581Z,1520532700.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:40.607Z,1520532700.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:40.980Z,1520532700.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:41.001Z,1520532701.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:41.376Z,1520532701.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:41.392Z,1520532701.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:41.782Z,1520532701.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:41.810Z,1520532701.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:42.188Z,1520532702.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:42.210Z,1520532702.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:42.591Z,1520532702.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:42.609Z,1520532702.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:42.976Z,1520532702.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:43.010Z,1520532703.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:43.379Z,1520532703.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:43.398Z,1520532703.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:43.788Z,1520532703.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:43.811Z,1520532703.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:44.196Z,1520532704.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:44.212Z,1520532704.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:44.590Z,1520532704.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:44.639Z,1520532704.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:44.971Z,1520532704.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:45.001Z,1520532705.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:45.367Z,1520532705.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:45.393Z,1520532705.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:45.787Z,1520532705.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:45.806Z,1520532705.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:46.195Z,1520532706.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:46.240Z,1520532706.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:46.590Z,1520532706.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:46.605Z,1520532706.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:46.967Z,1520532706.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:46.995Z,1520532706.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:47.367Z,1520532707.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:47.410Z,1520532707.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:47.790Z,1520532707.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:47.805Z,1520532707.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:48.187Z,1520532708.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:48.210Z,1520532708.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:48.591Z,1520532708.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:48.611Z,1520532708.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:48.972Z,1520532708.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:49.003Z,1520532709.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:49.366Z,1520532709.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:49.403Z,1520532709.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:49.785Z,1520532709.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:49.825Z,1520532709.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:50.194Z,1520532710.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:50.214Z,1520532710.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:50.593Z,1520532710.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:50.615Z,1520532710.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:50.971Z,1520532710.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:51.007Z,1520532711.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:51.370Z,1520532711.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:51.403Z,1520532711.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:51.777Z,1520532711.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:51.820Z,1520532711.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:52.199Z,1520532712.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:52.215Z,1520532712.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:52.591Z,1520532712.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:52.627Z,1520532712.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:52.969Z,1520532712.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:52.996Z,1520532712.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:53.367Z,1520532713.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:53.383Z,1520532713.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:53.785Z,1520532713.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:53.822Z,1520532713.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:54.182Z,1520532714.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:54.235Z,1520532714.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:54.582Z,1520532714.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:54.612Z,1520532714.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:54.976Z,1520532714.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:55.009Z,1520532715.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:55.373Z,1520532715.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:55.405Z,1520532715.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:55.786Z,1520532715.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:55.827Z,1520532715.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:56.190Z,1520532716.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:56.220Z,1520532716.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:56.586Z,1520532716.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:56.627Z,1520532716.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:56.973Z,1520532716.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:56.990Z,1520532716.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:57.031Z,1520532717.031 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T18:11:57.371Z,1520532717.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:57.395Z,1520532717.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:57.789Z,1520532717.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:57.827Z,1520532717.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:11:58.181Z,1520532718.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:11:58.197Z,1520532718.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:01.285Z,1520532721.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:01.301Z,1520532721.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:01.393Z,1520532721.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:01.433Z,1520532721.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:01.764Z,1520532721.764 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-03-08T18:12:01.764Z,1520532721.764 [DropWeight] Hardware Fault, FailCount= 1
2018-03-08T18:12:01.764Z,1520532721.764 [DropWeight](ERROR): Hardware Fault
2018-03-08T18:12:01.782Z,1520532721.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:01.838Z,1520532721.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:01.850Z,1520532721.850 [CBIT](INFO): Critical error at 20180308T181201
2018-03-08T18:12:01.852Z,1520532721.852 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-03-08T18:12:01.853Z,1520532721.853 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-03-08T18:12:02.179Z,1520532722.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:02.227Z,1520532722.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:02.238Z,1520532722.238 [CBIT](INFO): Critical error at 20180308T181201
2018-03-08T18:12:02.578Z,1520532722.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:02.594Z,1520532722.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:02.981Z,1520532722.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:03.007Z,1520532723.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:03.387Z,1520532723.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:03.407Z,1520532723.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:03.784Z,1520532723.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:03.830Z,1520532723.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:04.175Z,1520532724.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:04.191Z,1520532724.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:04.578Z,1520532724.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:04.595Z,1520532724.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:04.975Z,1520532724.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:04.996Z,1520532724.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:05.379Z,1520532725.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:05.399Z,1520532725.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:05.784Z,1520532725.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:05.799Z,1520532725.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:06.184Z,1520532726.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:06.204Z,1520532726.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:06.584Z,1520532726.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:06.604Z,1520532726.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:06.980Z,1520532726.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:06.995Z,1520532726.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:07.374Z,1520532727.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:07.390Z,1520532727.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:07.784Z,1520532727.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:07.809Z,1520532727.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:08.191Z,1520532728.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:08.211Z,1520532728.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:08.588Z,1520532728.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:08.632Z,1520532728.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:08.981Z,1520532728.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:08.995Z,1520532728.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:09.379Z,1520532729.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:09.402Z,1520532729.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:09.790Z,1520532729.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:09.808Z,1520532729.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:10.189Z,1520532730.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:10.233Z,1520532730.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:10.588Z,1520532730.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:10.604Z,1520532730.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:10.976Z,1520532730.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:10.991Z,1520532730.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:11.375Z,1520532731.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:11.394Z,1520532731.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:11.785Z,1520532731.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:11.800Z,1520532731.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:12.188Z,1520532732.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:12.203Z,1520532732.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:12.589Z,1520532732.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:12.611Z,1520532732.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:12.980Z,1520532732.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:13.001Z,1520532733.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:13.374Z,1520532733.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:13.389Z,1520532733.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:13.786Z,1520532733.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:13.801Z,1520532733.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:14.188Z,1520532734.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:14.209Z,1520532734.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:14.589Z,1520532734.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:14.608Z,1520532734.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:14.980Z,1520532734.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:15.007Z,1520532735.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:15.369Z,1520532735.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:15.401Z,1520532735.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:15.795Z,1520532735.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:15.825Z,1520532735.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:16.197Z,1520532736.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:16.218Z,1520532736.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:16.589Z,1520532736.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:16.627Z,1520532736.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:16.968Z,1520532736.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:16.997Z,1520532736.997 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:16.997Z,1520532736.997 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 209
2018-03-08T18:12:16.997Z,1520532736.997 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T18:12:16.999Z,1520532736.999 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:16.999Z,1520532736.999 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 209
2018-03-08T18:12:16.999Z,1520532736.999 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T18:12:17.001Z,1520532737.001 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:17.001Z,1520532737.001 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 209
2018-03-08T18:12:17.001Z,1520532737.001 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T18:12:17.019Z,1520532737.019 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T18:12:17.019Z,1520532737.019 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T18:12:17.019Z,1520532737.019 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T18:12:17.366Z,1520532737.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:17.418Z,1520532737.418 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T18:12:17.418Z,1520532737.418 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 209
2018-03-08T18:12:17.418Z,1520532737.418 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T18:12:17.418Z,1520532737.418 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 209
2018-03-08T18:12:17.419Z,1520532737.419 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T18:12:17.419Z,1520532737.419 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 209
2018-03-08T18:12:17.794Z,1520532737.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:17.810Z,1520532737.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T18:12:17.811Z,1520532737.811 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:12:17.811Z,1520532737.811 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:12:17.811Z,1520532737.811 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T18:12:17.812Z,1520532737.812 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:12:17.812Z,1520532737.812 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:12:17.813Z,1520532737.813 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T18:12:17.813Z,1520532737.813 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:12:17.813Z,1520532737.813 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:12:18.181Z,1520532738.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:18.220Z,1520532738.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T18:12:18.222Z,1520532738.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:18.581Z,1520532738.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:18.604Z,1520532738.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T18:12:18.605Z,1520532738.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:18.969Z,1520532738.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:18.984Z,1520532738.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T18:12:19.001Z,1520532739.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:19.374Z,1520532739.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:19.406Z,1520532739.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T18:12:19.407Z,1520532739.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:19.786Z,1520532739.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:19.814Z,1520532739.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T18:12:19.815Z,1520532739.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:20.189Z,1520532740.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:20.219Z,1520532740.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T18:12:20.220Z,1520532740.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:20.584Z,1520532740.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:20.620Z,1520532740.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T18:12:20.621Z,1520532740.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:20.972Z,1520532740.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:20.988Z,1520532740.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T18:12:20.990Z,1520532740.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:21.374Z,1520532741.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:21.394Z,1520532741.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T18:12:21.395Z,1520532741.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:21.789Z,1520532741.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:21.820Z,1520532741.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T18:12:21.825Z,1520532741.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:22.189Z,1520532742.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:22.223Z,1520532742.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T18:12:22.224Z,1520532742.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:22.591Z,1520532742.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:22.624Z,1520532742.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T18:12:22.625Z,1520532742.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:22.974Z,1520532742.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:23.021Z,1520532743.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T18:12:23.023Z,1520532743.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:23.375Z,1520532743.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:23.389Z,1520532743.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T18:12:23.390Z,1520532743.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:23.777Z,1520532743.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:23.792Z,1520532743.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T18:12:23.793Z,1520532743.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:24.180Z,1520532744.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:24.200Z,1520532744.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T18:12:24.201Z,1520532744.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:24.582Z,1520532744.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:24.602Z,1520532744.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T18:12:24.603Z,1520532744.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:24.978Z,1520532744.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:24.998Z,1520532744.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T18:12:24.999Z,1520532744.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:25.375Z,1520532745.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:25.390Z,1520532745.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T18:12:25.391Z,1520532745.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:25.784Z,1520532745.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:25.805Z,1520532745.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T18:12:25.825Z,1520532745.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:26.185Z,1520532746.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:26.200Z,1520532746.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T18:12:26.201Z,1520532746.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:26.584Z,1520532746.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:26.599Z,1520532746.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T18:12:26.600Z,1520532746.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:26.980Z,1520532746.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:26.995Z,1520532746.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T18:12:26.996Z,1520532746.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:27.380Z,1520532747.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:27.400Z,1520532747.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T18:12:27.401Z,1520532747.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:27.784Z,1520532747.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:27.799Z,1520532747.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T18:12:27.800Z,1520532747.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:28.186Z,1520532748.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:28.201Z,1520532748.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T18:12:28.202Z,1520532748.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:28.585Z,1520532748.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:28.603Z,1520532748.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T18:12:28.605Z,1520532748.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:28.975Z,1520532748.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:28.995Z,1520532748.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T18:12:28.997Z,1520532748.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:29.376Z,1520532749.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:29.398Z,1520532749.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T18:12:29.399Z,1520532749.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:29.785Z,1520532749.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:29.800Z,1520532749.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T18:12:29.801Z,1520532749.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:30.189Z,1520532750.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:30.209Z,1520532750.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T18:12:30.210Z,1520532750.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:30.592Z,1520532750.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:30.614Z,1520532750.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T18:12:30.615Z,1520532750.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:30.974Z,1520532750.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:31.006Z,1520532751.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T18:12:31.007Z,1520532751.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:31.375Z,1520532751.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:31.390Z,1520532751.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T18:12:31.391Z,1520532751.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:31.787Z,1520532751.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:31.807Z,1520532751.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T18:12:31.808Z,1520532751.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:32.191Z,1520532752.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:32.209Z,1520532752.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T18:12:32.210Z,1520532752.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:32.589Z,1520532752.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:32.632Z,1520532752.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T18:12:32.633Z,1520532752.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:32.978Z,1520532752.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:32.992Z,1520532752.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T18:12:32.993Z,1520532752.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:33.364Z,1520532753.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:33.392Z,1520532753.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T18:12:33.398Z,1520532753.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:33.793Z,1520532753.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:33.809Z,1520532753.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T18:12:33.810Z,1520532753.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:34.197Z,1520532754.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:34.237Z,1520532754.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T18:12:34.238Z,1520532754.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:34.577Z,1520532754.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:34.617Z,1520532754.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T18:12:34.618Z,1520532754.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:34.979Z,1520532754.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:34.995Z,1520532754.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T18:12:34.996Z,1520532754.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:35.366Z,1520532755.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:35.398Z,1520532755.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T18:12:35.399Z,1520532755.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:35.782Z,1520532755.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:35.806Z,1520532755.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T18:12:35.807Z,1520532755.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:36.194Z,1520532756.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:36.213Z,1520532756.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T18:12:36.215Z,1520532756.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:36.589Z,1520532756.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:36.610Z,1520532756.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T18:12:36.611Z,1520532756.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:36.968Z,1520532756.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:37.001Z,1520532757.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:37.370Z,1520532757.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:37.397Z,1520532757.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:37.784Z,1520532757.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:37.804Z,1520532757.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:38.193Z,1520532758.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:38.214Z,1520532758.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:38.591Z,1520532758.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:38.609Z,1520532758.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:38.986Z,1520532758.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:39.011Z,1520532759.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:39.365Z,1520532759.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:39.392Z,1520532759.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:39.786Z,1520532759.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:39.807Z,1520532759.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:40.193Z,1520532760.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:40.210Z,1520532760.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:40.581Z,1520532760.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:40.607Z,1520532760.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:40.967Z,1520532760.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:40.999Z,1520532760.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:41.371Z,1520532761.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:41.409Z,1520532761.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:41.774Z,1520532761.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:41.846Z,1520532761.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:42.187Z,1520532762.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:42.220Z,1520532762.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:42.582Z,1520532762.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:42.618Z,1520532762.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:42.975Z,1520532762.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:42.991Z,1520532762.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:43.377Z,1520532763.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:43.430Z,1520532763.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:43.788Z,1520532763.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:43.832Z,1520532763.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:44.188Z,1520532764.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:44.228Z,1520532764.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:44.604Z,1520532764.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:44.621Z,1520532764.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:44.971Z,1520532764.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:45.011Z,1520532765.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:45.368Z,1520532765.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:45.383Z,1520532765.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:45.784Z,1520532765.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:45.809Z,1520532765.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:46.185Z,1520532766.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:46.219Z,1520532766.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:46.581Z,1520532766.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:46.614Z,1520532766.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:46.972Z,1520532766.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:46.988Z,1520532766.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:47.374Z,1520532767.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:47.389Z,1520532767.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:47.777Z,1520532767.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:47.793Z,1520532767.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:48.181Z,1520532768.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:48.201Z,1520532768.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:48.593Z,1520532768.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:48.629Z,1520532768.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:48.978Z,1520532768.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:48.999Z,1520532768.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:49.374Z,1520532769.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:49.390Z,1520532769.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:49.781Z,1520532769.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:49.801Z,1520532769.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:50.186Z,1520532770.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:50.201Z,1520532770.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:50.585Z,1520532770.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:50.600Z,1520532770.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:50.980Z,1520532770.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:50.995Z,1520532770.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:51.371Z,1520532771.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:51.402Z,1520532771.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:51.788Z,1520532771.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:51.804Z,1520532771.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:52.190Z,1520532772.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:52.215Z,1520532772.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:52.576Z,1520532772.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:52.626Z,1520532772.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:52.979Z,1520532772.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:52.999Z,1520532772.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:53.367Z,1520532773.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:53.398Z,1520532773.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:53.785Z,1520532773.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:53.801Z,1520532773.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:54.193Z,1520532774.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:54.213Z,1520532774.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:54.583Z,1520532774.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:54.608Z,1520532774.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:54.968Z,1520532774.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:54.995Z,1520532774.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:55.366Z,1520532775.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:55.403Z,1520532775.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:55.786Z,1520532775.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:55.808Z,1520532775.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:56.194Z,1520532776.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:56.211Z,1520532776.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:56.589Z,1520532776.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:56.633Z,1520532776.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:56.980Z,1520532776.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:56.995Z,1520532776.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:57.362Z,1520532777.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:57.389Z,1520532777.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:57.785Z,1520532777.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:57.805Z,1520532777.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:58.193Z,1520532778.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:58.235Z,1520532778.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:12:58.581Z,1520532778.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:12:58.597Z,1520532778.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:01.678Z,1520532781.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:01.694Z,1520532781.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:01.798Z,1520532781.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:01.838Z,1520532781.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:02.165Z,1520532782.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:02.195Z,1520532782.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:02.565Z,1520532782.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:02.596Z,1520532782.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:02.958Z,1520532782.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:02.989Z,1520532782.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:03.348Z,1520532783.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:03.364Z,1520532783.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:03.749Z,1520532783.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:03.764Z,1520532783.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:04.155Z,1520532784.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:04.201Z,1520532784.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:04.569Z,1520532784.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:04.619Z,1520532784.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:04.961Z,1520532784.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:04.999Z,1520532784.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:05.361Z,1520532785.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:05.377Z,1520532785.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:05.758Z,1520532785.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:05.773Z,1520532785.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:06.152Z,1520532786.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:06.168Z,1520532786.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:06.542Z,1520532786.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:06.575Z,1520532786.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:06.956Z,1520532786.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:06.972Z,1520532786.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:07.351Z,1520532787.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:07.372Z,1520532787.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:07.751Z,1520532787.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:07.771Z,1520532787.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:08.161Z,1520532788.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:08.177Z,1520532788.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:08.561Z,1520532788.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:08.577Z,1520532788.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:08.961Z,1520532788.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:08.977Z,1520532788.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:09.355Z,1520532789.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:09.371Z,1520532789.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:09.747Z,1520532789.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:09.764Z,1520532789.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:10.141Z,1520532790.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:10.179Z,1520532790.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:10.556Z,1520532790.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:10.572Z,1520532790.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:10.962Z,1520532790.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:10.978Z,1520532790.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:11.366Z,1520532791.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:11.381Z,1520532791.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:11.761Z,1520532791.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:11.778Z,1520532791.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:12.155Z,1520532792.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:12.170Z,1520532792.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:12.540Z,1520532792.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:12.579Z,1520532792.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:12.951Z,1520532792.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:12.970Z,1520532792.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:13.339Z,1520532793.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:13.379Z,1520532793.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:13.751Z,1520532793.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:13.767Z,1520532793.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:14.161Z,1520532794.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:14.176Z,1520532794.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:14.563Z,1520532794.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:14.579Z,1520532794.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:14.953Z,1520532794.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:14.981Z,1520532794.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:15.356Z,1520532795.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:15.372Z,1520532795.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:15.743Z,1520532795.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:15.779Z,1520532795.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:16.144Z,1520532796.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:16.191Z,1520532796.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:16.547Z,1520532796.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:16.578Z,1520532796.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:16.953Z,1520532796.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:16.990Z,1520532796.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:17.365Z,1520532797.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:17.390Z,1520532797.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:17.765Z,1520532797.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:17.790Z,1520532797.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:18.143Z,1520532798.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:18.180Z,1520532798.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:18.548Z,1520532798.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:18.564Z,1520532798.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:18.948Z,1520532798.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:18.972Z,1520532798.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:19.353Z,1520532799.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:19.369Z,1520532799.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:19.752Z,1520532799.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:19.768Z,1520532799.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:20.166Z,1520532800.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:20.199Z,1520532800.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:20.565Z,1520532800.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:20.603Z,1520532800.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:20.953Z,1520532800.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:20.969Z,1520532800.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:21.350Z,1520532801.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:21.367Z,1520532801.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:21.752Z,1520532801.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:21.767Z,1520532801.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:22.150Z,1520532802.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:22.170Z,1520532802.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:22.552Z,1520532802.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:22.567Z,1520532802.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:22.954Z,1520532802.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:22.969Z,1520532802.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:23.353Z,1520532803.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:23.369Z,1520532803.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:23.757Z,1520532803.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:23.773Z,1520532803.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:24.148Z,1520532804.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:24.163Z,1520532804.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:24.542Z,1520532804.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:24.565Z,1520532804.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:24.951Z,1520532804.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:24.967Z,1520532804.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:25.348Z,1520532805.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:25.363Z,1520532805.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:25.754Z,1520532805.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:25.769Z,1520532805.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:26.158Z,1520532806.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:26.173Z,1520532806.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:26.561Z,1520532806.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:26.613Z,1520532806.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:26.962Z,1520532806.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:26.977Z,1520532806.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:27.359Z,1520532807.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:27.379Z,1520532807.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:27.754Z,1520532807.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:27.775Z,1520532807.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:28.148Z,1520532808.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:28.198Z,1520532808.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:28.551Z,1520532808.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:28.575Z,1520532808.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:28.956Z,1520532808.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:28.980Z,1520532808.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:29.373Z,1520532809.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:29.408Z,1520532809.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:29.753Z,1520532809.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:29.768Z,1520532809.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:30.151Z,1520532810.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:30.166Z,1520532810.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:30.551Z,1520532810.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:30.566Z,1520532810.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:30.952Z,1520532810.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:30.974Z,1520532810.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:31.356Z,1520532811.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:31.371Z,1520532811.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:31.754Z,1520532811.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:31.775Z,1520532811.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:32.157Z,1520532812.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:32.173Z,1520532812.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:32.556Z,1520532812.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:32.571Z,1520532812.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:32.957Z,1520532812.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:32.974Z,1520532812.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:33.354Z,1520532813.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:33.369Z,1520532813.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:33.749Z,1520532813.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:33.764Z,1520532813.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:34.149Z,1520532814.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:34.169Z,1520532814.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:34.551Z,1520532814.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:34.566Z,1520532814.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:34.956Z,1520532814.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:34.972Z,1520532814.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:35.357Z,1520532815.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:35.372Z,1520532815.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:35.756Z,1520532815.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:35.779Z,1520532815.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:36.154Z,1520532816.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:36.169Z,1520532816.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:36.543Z,1520532816.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:36.558Z,1520532816.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:36.945Z,1520532816.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:36.960Z,1520532816.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:37.413Z,1520532817.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:37.429Z,1520532817.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:37.745Z,1520532817.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:37.779Z,1520532817.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:38.157Z,1520532818.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:38.173Z,1520532818.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:38.561Z,1520532818.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:38.576Z,1520532818.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:38.957Z,1520532818.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:38.973Z,1520532818.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:39.343Z,1520532819.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:39.362Z,1520532819.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:39.746Z,1520532819.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:39.761Z,1520532819.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:40.149Z,1520532820.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:40.241Z,1520532820.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:40.545Z,1520532820.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:40.561Z,1520532820.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:40.957Z,1520532820.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:40.972Z,1520532820.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:41.358Z,1520532821.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:41.383Z,1520532821.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:41.754Z,1520532821.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:41.778Z,1520532821.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:42.149Z,1520532822.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:42.179Z,1520532822.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:42.556Z,1520532822.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:42.572Z,1520532822.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:42.955Z,1520532822.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:42.970Z,1520532822.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:43.357Z,1520532823.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:43.372Z,1520532823.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:43.755Z,1520532823.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:43.770Z,1520532823.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:44.161Z,1520532824.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:44.177Z,1520532824.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:44.566Z,1520532824.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:44.582Z,1520532824.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:44.962Z,1520532824.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:44.977Z,1520532824.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:45.353Z,1520532825.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:45.368Z,1520532825.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:45.739Z,1520532825.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:45.776Z,1520532825.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:46.151Z,1520532826.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:46.171Z,1520532826.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:46.556Z,1520532826.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:46.571Z,1520532826.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:46.966Z,1520532826.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:46.981Z,1520532826.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:47.366Z,1520532827.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:47.381Z,1520532827.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:47.765Z,1520532827.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:47.780Z,1520532827.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:48.158Z,1520532828.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:48.173Z,1520532828.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:48.549Z,1520532828.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:48.569Z,1520532828.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:48.947Z,1520532828.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:48.970Z,1520532828.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:49.359Z,1520532829.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:49.374Z,1520532829.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:49.747Z,1520532829.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:49.770Z,1520532829.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:50.165Z,1520532830.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:50.183Z,1520532830.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:50.565Z,1520532830.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:50.581Z,1520532830.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:50.960Z,1520532830.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:50.977Z,1520532830.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:51.347Z,1520532831.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:51.370Z,1520532831.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:51.751Z,1520532831.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:51.767Z,1520532831.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:52.149Z,1520532832.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:52.169Z,1520532832.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:52.547Z,1520532832.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:52.569Z,1520532832.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:52.958Z,1520532832.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:52.978Z,1520532832.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:53.357Z,1520532833.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:53.379Z,1520532833.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:53.762Z,1520532833.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:53.777Z,1520532833.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:54.142Z,1520532834.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:54.180Z,1520532834.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:54.541Z,1520532834.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:54.577Z,1520532834.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:54.942Z,1520532834.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:54.979Z,1520532834.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:55.357Z,1520532835.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:55.372Z,1520532835.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:55.742Z,1520532835.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:55.769Z,1520532835.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:56.158Z,1520532836.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:56.186Z,1520532836.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:56.562Z,1520532836.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:56.578Z,1520532836.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:56.954Z,1520532836.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:56.986Z,1520532836.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:57.347Z,1520532837.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:57.374Z,1520532837.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:57.743Z,1520532837.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:57.771Z,1520532837.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:58.144Z,1520532838.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:58.176Z,1520532838.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:58.559Z,1520532838.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:58.574Z,1520532838.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:58.963Z,1520532838.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:58.979Z,1520532838.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:59.361Z,1520532839.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:59.377Z,1520532839.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:13:59.768Z,1520532839.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:13:59.784Z,1520532839.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:02.843Z,1520532842.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:02.867Z,1520532842.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:02.965Z,1520532842.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:03.014Z,1520532843.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:03.338Z,1520532843.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:03.360Z,1520532843.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:03.734Z,1520532843.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:03.762Z,1520532843.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:04.138Z,1520532844.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:04.169Z,1520532844.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:04.526Z,1520532844.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:04.546Z,1520532844.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:04.926Z,1520532844.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:04.942Z,1520532844.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:05.326Z,1520532845.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:05.346Z,1520532845.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:05.722Z,1520532845.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:05.738Z,1520532845.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:06.128Z,1520532846.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:06.150Z,1520532846.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:06.524Z,1520532846.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:06.548Z,1520532846.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:06.930Z,1520532846.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:06.951Z,1520532846.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:07.327Z,1520532847.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:07.342Z,1520532847.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:07.719Z,1520532847.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:07.739Z,1520532847.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:08.119Z,1520532848.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:08.142Z,1520532848.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:08.526Z,1520532848.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:08.543Z,1520532848.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:08.932Z,1520532848.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:08.948Z,1520532848.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:09.337Z,1520532849.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:09.352Z,1520532849.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:09.734Z,1520532849.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:09.749Z,1520532849.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:10.126Z,1520532850.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:10.142Z,1520532850.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:10.517Z,1520532850.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:10.539Z,1520532850.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:10.922Z,1520532850.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:10.938Z,1520532850.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:11.328Z,1520532851.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:11.344Z,1520532851.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:11.717Z,1520532851.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:11.741Z,1520532851.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:12.134Z,1520532852.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:12.149Z,1520532852.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:12.532Z,1520532852.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:12.548Z,1520532852.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:12.932Z,1520532852.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:12.948Z,1520532852.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:13.326Z,1520532853.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:13.343Z,1520532853.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:13.712Z,1520532853.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:13.739Z,1520532853.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:14.121Z,1520532854.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:14.142Z,1520532854.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:14.526Z,1520532854.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:14.542Z,1520532854.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:14.932Z,1520532854.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:14.948Z,1520532854.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:15.336Z,1520532855.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:15.358Z,1520532855.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:15.737Z,1520532855.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:15.752Z,1520532855.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:16.128Z,1520532856.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:16.143Z,1520532856.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:16.530Z,1520532856.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:16.550Z,1520532856.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:16.926Z,1520532856.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:16.942Z,1520532856.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:17.327Z,1520532857.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:17.343Z,1520532857.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:17.717Z,1520532857.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:17.746Z,1520532857.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:18.137Z,1520532858.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:18.152Z,1520532858.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:18.529Z,1520532858.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:18.545Z,1520532858.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:18.932Z,1520532858.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:18.948Z,1520532858.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:19.326Z,1520532859.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:19.342Z,1520532859.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:19.712Z,1520532859.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:19.744Z,1520532859.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:20.127Z,1520532860.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:20.143Z,1520532860.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:20.514Z,1520532860.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:20.542Z,1520532860.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:20.934Z,1520532860.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:20.949Z,1520532860.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:21.337Z,1520532861.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:21.352Z,1520532861.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:21.737Z,1520532861.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:21.752Z,1520532861.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:22.127Z,1520532862.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:22.143Z,1520532862.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:22.514Z,1520532862.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:22.549Z,1520532862.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:22.915Z,1520532862.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:22.948Z,1520532862.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:23.328Z,1520532863.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:23.344Z,1520532863.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:23.715Z,1520532863.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:23.751Z,1520532863.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:24.133Z,1520532864.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:24.148Z,1520532864.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:24.534Z,1520532864.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:24.562Z,1520532864.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:24.929Z,1520532864.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:24.955Z,1520532864.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:25.315Z,1520532865.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:25.348Z,1520532865.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:25.713Z,1520532865.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:25.751Z,1520532865.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:26.119Z,1520532866.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:26.151Z,1520532866.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:26.514Z,1520532866.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:26.546Z,1520532866.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:26.925Z,1520532866.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:26.959Z,1520532866.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:27.334Z,1520532867.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:27.361Z,1520532867.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:27.726Z,1520532867.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:27.761Z,1520532867.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:28.118Z,1520532868.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:28.159Z,1520532868.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:28.522Z,1520532868.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:28.539Z,1520532868.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:28.915Z,1520532868.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:28.930Z,1520532868.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:29.323Z,1520532869.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:29.339Z,1520532869.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:29.721Z,1520532869.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:29.739Z,1520532869.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:30.125Z,1520532870.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:30.146Z,1520532870.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:30.524Z,1520532870.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:30.540Z,1520532870.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:30.942Z,1520532870.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:30.972Z,1520532870.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:31.323Z,1520532871.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:31.338Z,1520532871.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:31.719Z,1520532871.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:31.738Z,1520532871.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:32.125Z,1520532872.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:32.146Z,1520532872.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:32.525Z,1520532872.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:32.540Z,1520532872.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:32.928Z,1520532872.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:32.951Z,1520532872.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:33.332Z,1520532873.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:33.348Z,1520532873.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:33.734Z,1520532873.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:33.749Z,1520532873.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:34.120Z,1520532874.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:34.136Z,1520532874.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:34.522Z,1520532874.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:34.539Z,1520532874.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:34.923Z,1520532874.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:34.939Z,1520532874.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:35.323Z,1520532875.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:35.340Z,1520532875.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:35.726Z,1520532875.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:35.743Z,1520532875.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:36.132Z,1520532876.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:36.148Z,1520532876.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:36.530Z,1520532876.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:36.555Z,1520532876.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:36.936Z,1520532876.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:36.952Z,1520532876.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:37.327Z,1520532877.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:37.350Z,1520532877.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:37.708Z,1520532877.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:37.739Z,1520532877.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:38.154Z,1520532878.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:38.189Z,1520532878.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:38.516Z,1520532878.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:38.572Z,1520532878.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:38.921Z,1520532878.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:38.955Z,1520532878.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:39.343Z,1520532879.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:39.362Z,1520532879.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:39.738Z,1520532879.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:39.753Z,1520532879.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:40.110Z,1520532880.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:40.156Z,1520532880.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:40.514Z,1520532880.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:40.550Z,1520532880.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:40.914Z,1520532880.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:40.950Z,1520532880.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:41.315Z,1520532881.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:41.347Z,1520532881.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:41.718Z,1520532881.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:41.751Z,1520532881.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:42.139Z,1520532882.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:42.155Z,1520532882.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:42.525Z,1520532882.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:42.552Z,1520532882.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:42.925Z,1520532882.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:42.952Z,1520532882.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:43.314Z,1520532883.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:43.345Z,1520532883.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:43.712Z,1520532883.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:43.728Z,1520532883.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:44.120Z,1520532884.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:44.136Z,1520532884.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:44.518Z,1520532884.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:44.534Z,1520532884.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:44.921Z,1520532884.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:44.937Z,1520532884.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:45.337Z,1520532885.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:45.366Z,1520532885.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:45.734Z,1520532885.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:45.766Z,1520532885.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:46.122Z,1520532886.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:46.161Z,1520532886.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:46.522Z,1520532886.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:46.538Z,1520532886.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:46.923Z,1520532886.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:46.939Z,1520532886.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:47.316Z,1520532887.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:47.331Z,1520532887.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:47.719Z,1520532887.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:47.743Z,1520532887.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:48.138Z,1520532888.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:48.168Z,1520532888.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:48.523Z,1520532888.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:48.539Z,1520532888.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:48.938Z,1520532888.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:48.967Z,1520532888.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:49.320Z,1520532889.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:49.353Z,1520532889.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:49.708Z,1520532889.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:49.744Z,1520532889.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:50.119Z,1520532890.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:50.142Z,1520532890.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:50.519Z,1520532890.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:50.543Z,1520532890.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:50.929Z,1520532890.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:50.950Z,1520532890.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:51.335Z,1520532891.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:51.354Z,1520532891.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:51.735Z,1520532891.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:51.755Z,1520532891.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:52.108Z,1520532892.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:52.140Z,1520532892.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:52.518Z,1520532892.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:52.550Z,1520532892.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:52.915Z,1520532892.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:52.944Z,1520532892.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:53.315Z,1520532893.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:53.350Z,1520532893.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:53.719Z,1520532893.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:53.745Z,1520532893.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:54.134Z,1520532894.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:54.150Z,1520532894.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:54.534Z,1520532894.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:54.562Z,1520532894.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:54.925Z,1520532894.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:54.952Z,1520532894.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:55.315Z,1520532895.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:55.353Z,1520532895.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:55.715Z,1520532895.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:55.751Z,1520532895.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:56.115Z,1520532896.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:56.143Z,1520532896.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:56.518Z,1520532896.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:56.550Z,1520532896.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:56.929Z,1520532896.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:56.962Z,1520532896.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:57.345Z,1520532897.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:57.361Z,1520532897.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:57.364Z,1520532897.364 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T18:09:57.0Z
2018-03-08T18:14:57.364Z,1520532897.364 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T18:14:57.364Z,1520532897.364 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T18:14:57.735Z,1520532897.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:57.763Z,1520532897.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:58.211Z,1520532898.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:58.232Z,1520532898.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:58.523Z,1520532898.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:58.538Z,1520532898.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:14:58.925Z,1520532898.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:14:58.941Z,1520532898.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:02.015Z,1520532902.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:02.032Z,1520532902.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:02.137Z,1520532902.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:02.174Z,1520532902.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:02.461Z,1520532902.461 [DataOverHttps](INFO): Sending 103 bytes from file Logs/20180308T074127/Courier0244.lzma
2018-03-08T18:15:02.510Z,1520532902.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:02.526Z,1520532902.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:02.897Z,1520532902.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:02.923Z,1520532902.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:03.263Z,1520532903.263 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0244.lzma.bak
2018-03-08T18:15:03.263Z,1520532903.263 [DataOverHttps](INFO): SBD MOMSN=7987980
2018-03-08T18:15:03.298Z,1520532903.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:03.331Z,1520532903.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:03.878Z,1520532903.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:03.894Z,1520532903.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:04.084Z,1520532904.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:04.126Z,1520532904.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:04.486Z,1520532904.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:04.522Z,1520532904.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:07.597Z,1520532907.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:07.622Z,1520532907.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:07.734Z,1520532907.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:07.771Z,1520532907.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:08.085Z,1520532908.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:08.113Z,1520532908.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:08.476Z,1520532908.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:08.491Z,1520532908.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:08.878Z,1520532908.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:08.893Z,1520532908.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:09.274Z,1520532909.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:09.293Z,1520532909.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:09.679Z,1520532909.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:09.694Z,1520532909.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:12.781Z,1520532912.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:12.797Z,1520532912.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:12.920Z,1520532912.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:12.954Z,1520532912.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:13.245Z,1520532913.245 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180308T074127/Express0245.lzma
2018-03-08T18:15:13.289Z,1520532913.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:13.304Z,1520532913.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:13.674Z,1520532913.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:13.694Z,1520532913.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:14.044Z,1520532914.044 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0245.lzma.bak
2018-03-08T18:15:14.044Z,1520532914.044 [DataOverHttps](INFO): SBD MOMSN=7987984
2018-03-08T18:15:14.087Z,1520532914.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:14.110Z,1520532914.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:14.649Z,1520532914.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:14.681Z,1520532914.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:14.684Z,1520532914.684 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T18:15:14.684Z,1520532914.684 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T18:15:14.684Z,1520532914.684 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T18:15:14.885Z,1520532914.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:14.930Z,1520532914.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:17.989Z,1520532917.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:18.004Z,1520532918.004 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:18.004Z,1520532918.004 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 210
2018-03-08T18:15:18.004Z,1520532918.004 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T18:15:18.006Z,1520532918.006 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:18.006Z,1520532918.006 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 210
2018-03-08T18:15:18.006Z,1520532918.006 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T18:15:18.008Z,1520532918.008 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:18.008Z,1520532918.008 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 210
2018-03-08T18:15:18.008Z,1520532918.008 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T18:15:18.058Z,1520532918.058 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T18:15:18.058Z,1520532918.058 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T18:15:18.058Z,1520532918.058 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T18:15:18.130Z,1520532918.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:18.171Z,1520532918.171 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T18:15:18.171Z,1520532918.171 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 210
2018-03-08T18:15:18.171Z,1520532918.171 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T18:15:18.171Z,1520532918.171 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 210
2018-03-08T18:15:18.172Z,1520532918.172 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T18:15:18.172Z,1520532918.172 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 210
2018-03-08T18:15:18.510Z,1520532918.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:18.526Z,1520532918.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T18:15:18.526Z,1520532918.526 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:15:18.526Z,1520532918.526 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:15:18.527Z,1520532918.527 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T18:15:18.527Z,1520532918.527 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:15:18.527Z,1520532918.527 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:15:18.528Z,1520532918.528 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T18:15:18.528Z,1520532918.528 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:15:18.549Z,1520532918.549 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:15:18.906Z,1520532918.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:18.922Z,1520532918.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-03-08T18:15:18.923Z,1520532918.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:19.308Z,1520532919.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:19.327Z,1520532919.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-03-08T18:15:19.328Z,1520532919.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:19.708Z,1520532919.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:19.722Z,1520532919.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-03-08T18:15:19.723Z,1520532919.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:20.109Z,1520532920.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:20.124Z,1520532920.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-03-08T18:15:20.125Z,1520532920.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:20.507Z,1520532920.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:20.530Z,1520532920.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-03-08T18:15:20.531Z,1520532920.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:20.921Z,1520532920.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:20.958Z,1520532920.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2018-03-08T18:15:20.959Z,1520532920.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:21.306Z,1520532921.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:21.326Z,1520532921.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-03-08T18:15:21.327Z,1520532921.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:21.700Z,1520532921.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:21.718Z,1520532921.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-08T18:15:21.719Z,1520532921.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:22.105Z,1520532922.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:22.120Z,1520532922.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-03-08T18:15:22.121Z,1520532922.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:22.503Z,1520532922.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:22.517Z,1520532922.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-03-08T18:15:22.518Z,1520532922.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:22.909Z,1520532922.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:22.924Z,1520532922.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-08T18:15:22.925Z,1520532922.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:23.321Z,1520532923.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:23.357Z,1520532923.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2018-03-08T18:15:23.358Z,1520532923.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:23.709Z,1520532923.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:23.730Z,1520532923.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T18:15:23.731Z,1520532923.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:24.104Z,1520532924.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:24.119Z,1520532924.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T18:15:24.120Z,1520532924.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:24.505Z,1520532924.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:24.526Z,1520532924.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-08T18:15:24.527Z,1520532924.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:24.907Z,1520532924.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:24.922Z,1520532924.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-08T18:15:24.923Z,1520532924.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:25.301Z,1520532925.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:25.320Z,1520532925.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-08T18:15:25.321Z,1520532925.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:25.705Z,1520532925.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:25.720Z,1520532925.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-08T18:15:25.721Z,1520532925.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:26.108Z,1520532926.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:26.130Z,1520532926.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-08T18:15:26.131Z,1520532926.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:26.510Z,1520532926.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:26.525Z,1520532926.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-08T18:15:26.526Z,1520532926.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:26.925Z,1520532926.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:26.957Z,1520532926.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2018-03-08T18:15:26.958Z,1520532926.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:27.307Z,1520532927.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:27.321Z,1520532927.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-08T18:15:27.322Z,1520532927.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:27.701Z,1520532927.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:27.729Z,1520532927.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-08T18:15:27.730Z,1520532927.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:28.108Z,1520532928.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:28.123Z,1520532928.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T18:15:28.124Z,1520532928.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:28.503Z,1520532928.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:28.518Z,1520532928.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-08T18:15:28.519Z,1520532928.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:28.913Z,1520532928.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:28.936Z,1520532928.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T18:15:28.937Z,1520532928.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:29.329Z,1520532929.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:29.350Z,1520532929.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T18:15:29.351Z,1520532929.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:29.705Z,1520532929.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:29.737Z,1520532929.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T18:15:29.742Z,1520532929.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:30.102Z,1520532930.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:30.128Z,1520532930.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T18:15:30.129Z,1520532930.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:30.498Z,1520532930.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:30.530Z,1520532930.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T18:15:30.531Z,1520532930.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:30.899Z,1520532930.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:30.917Z,1520532930.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-08T18:15:30.918Z,1520532930.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:31.301Z,1520532931.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:31.316Z,1520532931.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-08T18:15:31.317Z,1520532931.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:31.700Z,1520532931.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:31.715Z,1520532931.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-08T18:15:31.716Z,1520532931.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:32.109Z,1520532932.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:32.130Z,1520532932.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-08T18:15:32.131Z,1520532932.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:32.517Z,1520532932.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:32.532Z,1520532932.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-08T18:15:32.534Z,1520532932.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:32.912Z,1520532932.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:32.927Z,1520532932.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T18:15:32.928Z,1520532932.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:33.300Z,1520532933.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:33.326Z,1520532933.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-08T18:15:33.327Z,1520532933.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:33.703Z,1520532933.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:33.718Z,1520532933.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T18:15:33.719Z,1520532933.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:34.112Z,1520532934.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:34.127Z,1520532934.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T18:15:34.128Z,1520532934.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:34.500Z,1520532934.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:34.525Z,1520532934.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T18:15:34.526Z,1520532934.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:34.911Z,1520532934.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:34.927Z,1520532934.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T18:15:34.928Z,1520532934.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:35.317Z,1520532935.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:35.332Z,1520532935.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-08T18:15:35.334Z,1520532935.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:35.713Z,1520532935.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:35.730Z,1520532935.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T18:15:35.731Z,1520532935.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:36.111Z,1520532936.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:36.126Z,1520532936.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-08T18:15:36.127Z,1520532936.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:36.510Z,1520532936.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:36.525Z,1520532936.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-08T18:15:36.526Z,1520532936.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:36.903Z,1520532936.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:36.922Z,1520532936.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T18:15:36.923Z,1520532936.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:37.307Z,1520532937.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:37.322Z,1520532937.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T18:15:37.323Z,1520532937.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:37.710Z,1520532937.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:37.725Z,1520532937.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T18:15:37.726Z,1520532937.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:38.112Z,1520532938.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:38.130Z,1520532938.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:38.513Z,1520532938.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:38.528Z,1520532938.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:38.913Z,1520532938.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:38.929Z,1520532938.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:39.307Z,1520532939.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:39.322Z,1520532939.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:39.703Z,1520532939.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:39.718Z,1520532939.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:40.105Z,1520532940.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:40.125Z,1520532940.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:40.507Z,1520532940.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:40.522Z,1520532940.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:40.914Z,1520532940.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:40.930Z,1520532940.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:41.313Z,1520532941.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:41.329Z,1520532941.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:41.725Z,1520532941.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:41.762Z,1520532941.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:42.108Z,1520532942.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:42.124Z,1520532942.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:42.516Z,1520532942.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:42.531Z,1520532942.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:42.910Z,1520532942.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:42.926Z,1520532942.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:43.311Z,1520532943.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:43.327Z,1520532943.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:43.711Z,1520532943.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:43.731Z,1520532943.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:44.113Z,1520532944.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:44.129Z,1520532944.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:44.511Z,1520532944.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:44.528Z,1520532944.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:44.913Z,1520532944.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:44.930Z,1520532944.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:45.310Z,1520532945.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:45.326Z,1520532945.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:45.698Z,1520532945.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:45.721Z,1520532945.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:46.110Z,1520532946.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:46.125Z,1520532946.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:46.511Z,1520532946.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:46.526Z,1520532946.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:46.912Z,1520532946.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:46.931Z,1520532946.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:47.313Z,1520532947.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:47.329Z,1520532947.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:47.713Z,1520532947.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:47.728Z,1520532947.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:48.110Z,1520532948.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:48.131Z,1520532948.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:48.507Z,1520532948.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:48.523Z,1520532948.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:48.907Z,1520532948.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:48.922Z,1520532948.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:49.311Z,1520532949.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:49.327Z,1520532949.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:49.707Z,1520532949.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:49.722Z,1520532949.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:50.117Z,1520532950.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:50.132Z,1520532950.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:50.516Z,1520532950.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:50.532Z,1520532950.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:50.917Z,1520532950.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:50.932Z,1520532950.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:51.312Z,1520532951.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:51.327Z,1520532951.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:51.703Z,1520532951.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:51.723Z,1520532951.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:52.105Z,1520532952.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:52.129Z,1520532952.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:52.494Z,1520532952.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:52.523Z,1520532952.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:52.917Z,1520532952.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:52.934Z,1520532952.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:53.320Z,1520532953.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:53.339Z,1520532953.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:53.717Z,1520532953.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:53.734Z,1520532953.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:54.110Z,1520532954.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:54.131Z,1520532954.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:54.518Z,1520532954.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:54.539Z,1520532954.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:54.911Z,1520532954.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:54.926Z,1520532954.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:55.312Z,1520532955.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:55.328Z,1520532955.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:55.698Z,1520532955.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:55.730Z,1520532955.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:56.117Z,1520532956.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:56.133Z,1520532956.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:56.511Z,1520532956.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:56.531Z,1520532956.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:56.913Z,1520532956.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:56.944Z,1520532956.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:57.310Z,1520532957.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:57.326Z,1520532957.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:57.696Z,1520532957.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:57.724Z,1520532957.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:58.103Z,1520532958.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:58.129Z,1520532958.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:58.493Z,1520532958.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:58.527Z,1520532958.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:58.913Z,1520532958.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:58.929Z,1520532958.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:59.321Z,1520532959.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:59.340Z,1520532959.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:15:59.726Z,1520532959.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:15:59.741Z,1520532959.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:00.103Z,1520532960.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:00.130Z,1520532960.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:00.498Z,1520532960.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:00.524Z,1520532960.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:00.898Z,1520532960.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:00.925Z,1520532960.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:01.303Z,1520532961.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:01.329Z,1520532961.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:01.698Z,1520532961.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:01.724Z,1520532961.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:02.116Z,1520532962.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:02.133Z,1520532962.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:02.513Z,1520532962.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:02.531Z,1520532962.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:02.921Z,1520532962.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:02.939Z,1520532962.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:03.298Z,1520532963.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:03.330Z,1520532963.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:03.692Z,1520532963.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:03.719Z,1520532963.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:04.103Z,1520532964.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:04.129Z,1520532964.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:04.498Z,1520532964.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:04.536Z,1520532964.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:04.906Z,1520532964.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:04.942Z,1520532964.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:05.325Z,1520532965.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:05.341Z,1520532965.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:05.718Z,1520532965.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:05.734Z,1520532965.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:06.102Z,1520532966.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:06.128Z,1520532966.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:06.498Z,1520532966.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:06.534Z,1520532966.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:06.898Z,1520532966.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:06.931Z,1520532966.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:07.295Z,1520532967.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:07.311Z,1520532967.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:07.699Z,1520532967.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:07.739Z,1520532967.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:08.128Z,1520532968.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:08.150Z,1520532968.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:08.509Z,1520532968.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:08.537Z,1520532968.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:08.909Z,1520532968.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:08.935Z,1520532968.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:09.298Z,1520532969.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:09.314Z,1520532969.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:09.696Z,1520532969.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:09.712Z,1520532969.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:10.104Z,1520532970.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:10.119Z,1520532970.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:10.506Z,1520532970.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:10.547Z,1520532970.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:10.905Z,1520532970.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:10.921Z,1520532970.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:11.321Z,1520532971.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:11.347Z,1520532971.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:11.718Z,1520532971.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:11.751Z,1520532971.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:12.099Z,1520532972.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:12.123Z,1520532972.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:12.502Z,1520532972.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:12.523Z,1520532972.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:12.904Z,1520532972.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:12.926Z,1520532972.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:13.301Z,1520532973.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:13.317Z,1520532973.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:13.703Z,1520532973.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:13.722Z,1520532973.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:14.121Z,1520532974.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:14.153Z,1520532974.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:14.510Z,1520532974.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:14.531Z,1520532974.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:14.921Z,1520532974.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:14.953Z,1520532974.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:15.310Z,1520532975.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:15.331Z,1520532975.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:18.407Z,1520532978.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:18.423Z,1520532978.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:18.524Z,1520532978.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:18.562Z,1520532978.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:18.889Z,1520532978.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:18.915Z,1520532978.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:19.289Z,1520532979.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:19.313Z,1520532979.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:19.686Z,1520532979.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:19.713Z,1520532979.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:20.072Z,1520532980.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:20.088Z,1520532980.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:20.479Z,1520532980.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:20.494Z,1520532980.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:20.868Z,1520532980.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:20.896Z,1520532980.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:21.280Z,1520532981.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:21.296Z,1520532981.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:21.679Z,1520532981.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:21.695Z,1520532981.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:22.094Z,1520532982.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:22.131Z,1520532982.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:22.485Z,1520532982.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:22.501Z,1520532982.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:22.892Z,1520532982.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:22.907Z,1520532982.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:23.276Z,1520532983.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:23.292Z,1520532983.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:23.680Z,1520532983.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:23.695Z,1520532983.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:24.076Z,1520532984.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:24.098Z,1520532984.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:24.476Z,1520532984.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:24.491Z,1520532984.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:24.885Z,1520532984.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:24.901Z,1520532984.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:25.293Z,1520532985.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:25.308Z,1520532985.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:25.680Z,1520532985.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:25.695Z,1520532985.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:26.074Z,1520532986.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:26.098Z,1520532986.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:26.483Z,1520532986.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:26.498Z,1520532986.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:26.875Z,1520532986.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:26.895Z,1520532986.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:27.278Z,1520532987.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:27.297Z,1520532987.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:27.683Z,1520532987.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:27.698Z,1520532987.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:28.086Z,1520532988.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:28.101Z,1520532988.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:28.490Z,1520532988.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:28.505Z,1520532988.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:28.885Z,1520532988.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:28.906Z,1520532988.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:29.268Z,1520532989.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:29.296Z,1520532989.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:29.683Z,1520532989.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:29.703Z,1520532989.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:30.083Z,1520532990.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:30.098Z,1520532990.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:30.482Z,1520532990.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:30.502Z,1520532990.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:30.886Z,1520532990.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:30.903Z,1520532990.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:31.289Z,1520532991.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:31.304Z,1520532991.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:31.684Z,1520532991.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:31.700Z,1520532991.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:32.078Z,1520532992.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:32.093Z,1520532992.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:32.483Z,1520532992.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:32.498Z,1520532992.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:32.875Z,1520532992.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:32.894Z,1520532992.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:33.279Z,1520532993.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:33.294Z,1520532993.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:33.683Z,1520532993.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:33.698Z,1520532993.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:34.086Z,1520532994.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:34.106Z,1520532994.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:34.489Z,1520532994.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:34.504Z,1520532994.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:34.888Z,1520532994.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:34.903Z,1520532994.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:35.276Z,1520532995.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:35.291Z,1520532995.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:35.678Z,1520532995.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:35.693Z,1520532995.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:36.079Z,1520532996.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:36.094Z,1520532996.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:36.483Z,1520532996.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:36.502Z,1520532996.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:36.887Z,1520532996.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:36.903Z,1520532996.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:37.288Z,1520532997.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:37.303Z,1520532997.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:37.688Z,1520532997.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:37.704Z,1520532997.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:38.082Z,1520532998.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:38.102Z,1520532998.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:38.483Z,1520532998.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:38.498Z,1520532998.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:38.864Z,1520532998.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:38.895Z,1520532998.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:39.280Z,1520532999.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:39.295Z,1520532999.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:39.670Z,1520532999.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:39.698Z,1520532999.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:40.089Z,1520533000.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:40.110Z,1520533000.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:40.493Z,1520533000.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:40.508Z,1520533000.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:40.887Z,1520533000.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:40.913Z,1520533000.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:41.283Z,1520533001.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:41.298Z,1520533001.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:41.670Z,1520533001.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:41.703Z,1520533001.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:42.071Z,1520533002.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:42.110Z,1520533002.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:42.482Z,1520533002.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:42.502Z,1520533002.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:42.889Z,1520533002.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:42.904Z,1520533002.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:43.292Z,1520533003.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:43.308Z,1520533003.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:43.686Z,1520533003.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:43.707Z,1520533003.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:44.081Z,1520533004.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:44.100Z,1520533004.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:44.470Z,1520533004.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:44.507Z,1520533004.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:44.868Z,1520533004.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:44.891Z,1520533004.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:45.271Z,1520533005.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:45.306Z,1520533005.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:45.674Z,1520533005.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:45.729Z,1520533005.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:46.085Z,1520533006.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:46.109Z,1520533006.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:46.499Z,1520533006.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:46.515Z,1520533006.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:46.889Z,1520533006.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:46.918Z,1520533006.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:47.278Z,1520533007.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:47.311Z,1520533007.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:47.675Z,1520533007.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:47.690Z,1520533007.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:48.076Z,1520533008.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:48.114Z,1520533008.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:48.478Z,1520533008.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:48.498Z,1520533008.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:48.893Z,1520533008.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:48.923Z,1520533008.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:49.289Z,1520533009.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:49.317Z,1520533009.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:49.693Z,1520533009.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:49.726Z,1520533009.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:50.080Z,1520533010.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:50.095Z,1520533010.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:50.479Z,1520533010.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:50.495Z,1520533010.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:50.880Z,1520533010.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:50.895Z,1520533010.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:51.284Z,1520533011.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:51.299Z,1520533011.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:51.680Z,1520533011.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:51.696Z,1520533011.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:52.081Z,1520533012.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:52.097Z,1520533012.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:52.485Z,1520533012.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:52.500Z,1520533012.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:52.894Z,1520533012.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:52.928Z,1520533012.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:53.276Z,1520533013.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:53.299Z,1520533013.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:53.682Z,1520533013.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:53.702Z,1520533013.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:54.083Z,1520533014.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:54.099Z,1520533014.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:54.478Z,1520533014.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:54.499Z,1520533014.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:54.885Z,1520533014.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:54.901Z,1520533014.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:55.285Z,1520533015.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:55.301Z,1520533015.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:55.697Z,1520533015.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:55.729Z,1520533015.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:56.083Z,1520533016.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:56.102Z,1520533016.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:56.483Z,1520533016.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:56.499Z,1520533016.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:56.879Z,1520533016.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:56.894Z,1520533016.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:57.279Z,1520533017.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:57.302Z,1520533017.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:57.686Z,1520533017.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:57.701Z,1520533017.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:58.085Z,1520533018.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:58.113Z,1520533018.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:58.498Z,1520533018.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:58.518Z,1520533018.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:58.895Z,1520533018.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:58.911Z,1520533018.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:59.274Z,1520533019.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:59.301Z,1520533019.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:16:59.670Z,1520533019.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:16:59.700Z,1520533019.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:00.071Z,1520533020.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:00.112Z,1520533020.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:00.474Z,1520533020.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:00.506Z,1520533020.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:00.889Z,1520533020.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:00.910Z,1520533020.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:01.298Z,1520533021.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:01.313Z,1520533021.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:01.693Z,1520533021.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:01.710Z,1520533021.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:02.070Z,1520533022.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:02.096Z,1520533022.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:02.471Z,1520533022.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:02.506Z,1520533022.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:02.870Z,1520533022.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:02.902Z,1520533022.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:03.271Z,1520533023.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:03.297Z,1520533023.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:03.666Z,1520533023.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:03.703Z,1520533023.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:04.085Z,1520533024.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:04.101Z,1520533024.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:04.498Z,1520533024.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:04.518Z,1520533024.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:04.893Z,1520533024.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:04.908Z,1520533024.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:05.268Z,1520533025.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:05.303Z,1520533025.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:05.671Z,1520533025.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:05.697Z,1520533025.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:06.071Z,1520533026.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:06.110Z,1520533026.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:06.471Z,1520533026.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:06.497Z,1520533026.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:06.893Z,1520533026.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:06.912Z,1520533026.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:07.295Z,1520533027.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:07.309Z,1520533027.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:07.682Z,1520533027.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:07.708Z,1520533027.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:08.072Z,1520533028.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:08.111Z,1520533028.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:08.477Z,1520533028.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:08.492Z,1520533028.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:08.881Z,1520533028.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:08.901Z,1520533028.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:09.281Z,1520533029.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:09.306Z,1520533029.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:09.679Z,1520533029.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:09.694Z,1520533029.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:10.092Z,1520533030.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:10.108Z,1520533030.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:10.491Z,1520533030.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:10.511Z,1520533030.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:10.893Z,1520533030.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:10.907Z,1520533030.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:11.268Z,1520533031.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:11.294Z,1520533031.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:11.673Z,1520533031.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:11.696Z,1520533031.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:12.080Z,1520533032.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:12.095Z,1520533032.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:12.473Z,1520533032.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:12.495Z,1520533032.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:12.889Z,1520533032.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:12.904Z,1520533032.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:13.292Z,1520533033.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:13.307Z,1520533033.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:13.692Z,1520533033.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:13.707Z,1520533033.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:14.083Z,1520533034.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:14.102Z,1520533034.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:14.479Z,1520533034.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:14.493Z,1520533034.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:14.873Z,1520533034.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:14.897Z,1520533034.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:15.277Z,1520533035.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:15.297Z,1520533035.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:15.679Z,1520533035.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:15.694Z,1520533035.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:18.789Z,1520533038.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:18.805Z,1520533038.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:18.917Z,1520533038.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:18.958Z,1520533038.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:19.275Z,1520533039.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:19.290Z,1520533039.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:19.658Z,1520533039.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:19.690Z,1520533039.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:20.055Z,1520533040.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:20.088Z,1520533040.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:20.458Z,1520533040.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:20.488Z,1520533040.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:20.876Z,1520533040.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:20.891Z,1520533040.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:21.272Z,1520533041.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:21.287Z,1520533041.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:21.679Z,1520533041.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:21.702Z,1520533041.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:22.051Z,1520533042.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:22.067Z,1520533042.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:22.454Z,1520533042.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:22.491Z,1520533042.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:22.858Z,1520533042.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:22.895Z,1520533042.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:23.259Z,1520533043.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:23.275Z,1520533043.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:23.660Z,1520533043.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:23.676Z,1520533043.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:24.073Z,1520533044.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:24.103Z,1520533044.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:24.469Z,1520533044.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:24.501Z,1520533044.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:24.861Z,1520533044.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:24.882Z,1520533044.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:25.260Z,1520533045.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:25.275Z,1520533045.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:25.660Z,1520533045.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:25.675Z,1520533045.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:26.055Z,1520533046.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:26.070Z,1520533046.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:26.460Z,1520533046.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:26.475Z,1520533046.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:26.861Z,1520533046.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:26.877Z,1520533046.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:27.273Z,1520533047.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:27.288Z,1520533047.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:27.665Z,1520533047.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:27.681Z,1520533047.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:28.059Z,1520533048.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:28.075Z,1520533048.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:28.449Z,1520533048.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:28.482Z,1520533048.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:28.864Z,1520533048.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:28.883Z,1520533048.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:29.264Z,1520533049.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:29.280Z,1520533049.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:29.651Z,1520533049.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:29.682Z,1520533049.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:30.070Z,1520533050.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:30.085Z,1520533050.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:30.473Z,1520533050.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:30.490Z,1520533050.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:30.869Z,1520533050.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:30.885Z,1520533050.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:31.269Z,1520533051.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:31.284Z,1520533051.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:31.651Z,1520533051.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:31.675Z,1520533051.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:32.056Z,1520533052.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:32.082Z,1520533052.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:32.451Z,1520533052.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:32.478Z,1520533052.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:32.868Z,1520533052.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:32.892Z,1520533052.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:33.275Z,1520533053.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:33.290Z,1520533053.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:33.671Z,1520533053.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:33.686Z,1520533053.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:34.054Z,1520533054.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:34.084Z,1520533054.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:34.447Z,1520533054.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:34.479Z,1520533054.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:34.855Z,1520533054.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:34.883Z,1520533054.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:35.247Z,1520533055.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:35.285Z,1520533055.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:35.646Z,1520533055.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:35.682Z,1520533055.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:36.065Z,1520533056.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:36.089Z,1520533056.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:36.470Z,1520533056.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:36.491Z,1520533056.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:36.857Z,1520533056.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:36.891Z,1520533056.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:37.250Z,1520533057.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:37.282Z,1520533057.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:37.650Z,1520533057.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:37.683Z,1520533057.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:38.047Z,1520533058.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:38.087Z,1520533058.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:38.455Z,1520533058.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:38.485Z,1520533058.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:38.875Z,1520533058.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:38.890Z,1520533058.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:39.273Z,1520533059.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:39.288Z,1520533059.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:39.661Z,1520533059.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:39.698Z,1520533059.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:40.054Z,1520533060.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:40.087Z,1520533060.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:40.454Z,1520533060.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:40.486Z,1520533060.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:40.851Z,1520533060.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:40.887Z,1520533060.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:41.251Z,1520533061.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:41.287Z,1520533061.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:41.655Z,1520533061.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:41.686Z,1520533061.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:42.061Z,1520533062.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:42.099Z,1520533062.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:42.479Z,1520533062.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:42.494Z,1520533062.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:42.866Z,1520533062.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:42.893Z,1520533062.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:43.250Z,1520533063.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:43.286Z,1520533063.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:43.654Z,1520533063.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:43.670Z,1520533063.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:44.053Z,1520533064.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:44.069Z,1520533064.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:44.457Z,1520533064.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:44.473Z,1520533064.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:44.869Z,1520533064.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:44.896Z,1520533064.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:45.269Z,1520533065.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:45.298Z,1520533065.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:45.669Z,1520533065.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:45.692Z,1520533065.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:46.055Z,1520533066.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:46.070Z,1520533066.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:46.451Z,1520533066.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:46.470Z,1520533066.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:46.858Z,1520533066.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:46.878Z,1520533066.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:47.260Z,1520533067.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:47.275Z,1520533067.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:47.660Z,1520533067.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:47.676Z,1520533067.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:48.073Z,1520533068.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:48.104Z,1520533068.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:48.469Z,1520533068.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:48.484Z,1520533068.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:48.873Z,1520533068.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:48.905Z,1520533068.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:49.262Z,1520533069.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:49.282Z,1520533069.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:49.662Z,1520533069.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:49.678Z,1520533069.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:50.062Z,1520533070.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:50.082Z,1520533070.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:50.462Z,1520533070.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:50.478Z,1520533070.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:50.864Z,1520533070.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:50.879Z,1520533070.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:51.269Z,1520533071.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:51.284Z,1520533071.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:51.665Z,1520533071.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:51.681Z,1520533071.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:52.054Z,1520533072.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:52.069Z,1520533072.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:52.463Z,1520533072.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:52.478Z,1520533072.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:52.862Z,1520533072.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:52.877Z,1520533072.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:53.260Z,1520533073.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:53.275Z,1520533073.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:53.662Z,1520533073.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:53.677Z,1520533073.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:54.063Z,1520533074.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:54.086Z,1520533074.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:54.466Z,1520533074.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:54.481Z,1520533074.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:54.865Z,1520533074.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:54.881Z,1520533074.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:55.262Z,1520533075.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:55.278Z,1520533075.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:55.662Z,1520533075.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:55.677Z,1520533075.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:56.062Z,1520533076.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:56.082Z,1520533076.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:56.462Z,1520533076.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:56.477Z,1520533076.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:56.865Z,1520533076.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:56.880Z,1520533076.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:57.266Z,1520533077.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:57.294Z,1520533077.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:57.672Z,1520533077.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:57.695Z,1520533077.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:58.063Z,1520533078.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:58.078Z,1520533078.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:58.462Z,1520533078.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:58.482Z,1520533078.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:58.853Z,1520533078.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:58.876Z,1520533078.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:59.259Z,1520533079.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:59.282Z,1520533079.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:17:59.662Z,1520533079.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:17:59.678Z,1520533079.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:00.072Z,1520533080.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:00.094Z,1520533080.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:00.472Z,1520533080.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:00.487Z,1520533080.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:00.872Z,1520533080.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:00.894Z,1520533080.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:01.263Z,1520533081.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:01.278Z,1520533081.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:01.646Z,1520533081.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:01.673Z,1520533081.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:02.065Z,1520533082.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:02.080Z,1520533082.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:02.462Z,1520533082.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:02.482Z,1520533082.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:02.870Z,1520533082.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:02.885Z,1520533082.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:03.272Z,1520533083.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:03.287Z,1520533083.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:03.665Z,1520533083.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:03.686Z,1520533083.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:04.046Z,1520533084.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:04.075Z,1520533084.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:04.451Z,1520533084.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:04.477Z,1520533084.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:04.852Z,1520533084.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:04.898Z,1520533084.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:05.251Z,1520533085.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:05.286Z,1520533085.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:05.652Z,1520533085.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:05.678Z,1520533085.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:06.069Z,1520533086.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:06.084Z,1520533086.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:06.469Z,1520533086.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:06.490Z,1520533086.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:06.873Z,1520533086.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:06.888Z,1520533086.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:07.250Z,1520533087.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:07.287Z,1520533087.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:07.654Z,1520533087.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:07.682Z,1520533087.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:08.055Z,1520533088.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:08.082Z,1520533088.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:08.450Z,1520533088.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:08.477Z,1520533088.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:08.874Z,1520533088.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:08.890Z,1520533088.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:09.272Z,1520533089.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:09.295Z,1520533089.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:09.671Z,1520533089.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:09.686Z,1520533089.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:10.051Z,1520533090.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:10.088Z,1520533090.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:10.447Z,1520533090.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:10.483Z,1520533090.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:10.855Z,1520533090.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:10.887Z,1520533090.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:11.255Z,1520533091.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:11.295Z,1520533091.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:11.645Z,1520533091.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:11.660Z,1520533091.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:12.080Z,1520533092.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:12.095Z,1520533092.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:12.470Z,1520533092.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:12.501Z,1520533092.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:12.865Z,1520533092.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:12.890Z,1520533092.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:13.259Z,1520533093.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:13.294Z,1520533093.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:13.652Z,1520533093.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:13.667Z,1520533093.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:14.059Z,1520533094.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:14.075Z,1520533094.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:14.459Z,1520533094.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:14.474Z,1520533094.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:14.869Z,1520533094.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:14.884Z,1520533094.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:15.261Z,1520533095.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:15.277Z,1520533095.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:15.674Z,1520533095.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:15.709Z,1520533095.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:16.062Z,1520533096.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:16.077Z,1520533096.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:19.162Z,1520533099.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:19.177Z,1520533099.177 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:19.177Z,1520533099.177 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 211
2018-03-08T18:18:19.177Z,1520533099.177 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T18:18:19.179Z,1520533099.179 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:19.179Z,1520533099.179 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 211
2018-03-08T18:18:19.179Z,1520533099.179 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T18:18:19.181Z,1520533099.181 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:19.181Z,1520533099.181 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 211
2018-03-08T18:18:19.181Z,1520533099.181 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T18:18:19.209Z,1520533099.209 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T18:18:19.210Z,1520533099.210 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T18:18:19.210Z,1520533099.210 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T18:18:19.283Z,1520533099.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:19.347Z,1520533099.347 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T18:18:19.347Z,1520533099.347 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 211
2018-03-08T18:18:19.347Z,1520533099.347 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T18:18:19.347Z,1520533099.347 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 211
2018-03-08T18:18:19.348Z,1520533099.348 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T18:18:19.348Z,1520533099.348 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 211
2018-03-08T18:18:19.677Z,1520533099.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:19.691Z,1520533099.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T18:18:19.691Z,1520533099.691 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:18:19.692Z,1520533099.692 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:18:19.692Z,1520533099.692 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T18:18:19.692Z,1520533099.692 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:18:19.693Z,1520533099.693 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:18:19.693Z,1520533099.693 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T18:18:19.693Z,1520533099.693 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:18:19.694Z,1520533099.694 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:18:20.061Z,1520533100.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:20.080Z,1520533100.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-03-08T18:18:20.081Z,1520533100.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:20.466Z,1520533100.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:20.481Z,1520533100.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-03-08T18:18:20.482Z,1520533100.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:20.842Z,1520533100.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:20.874Z,1520533100.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-03-08T18:18:20.875Z,1520533100.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:21.248Z,1520533101.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:21.275Z,1520533101.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-03-08T18:18:21.276Z,1520533101.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:21.642Z,1520533101.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:21.674Z,1520533101.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-03-08T18:18:21.675Z,1520533101.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:22.066Z,1520533102.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:22.081Z,1520533102.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-03-08T18:18:22.082Z,1520533102.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:22.453Z,1520533102.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:22.480Z,1520533102.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-03-08T18:18:22.485Z,1520533102.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:22.857Z,1520533102.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:22.884Z,1520533102.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-08T18:18:22.885Z,1520533102.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:23.242Z,1520533103.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:23.257Z,1520533103.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-03-08T18:18:23.258Z,1520533103.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:23.643Z,1520533103.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:23.658Z,1520533103.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-03-08T18:18:23.659Z,1520533103.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:24.051Z,1520533104.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:24.066Z,1520533104.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-08T18:18:24.067Z,1520533104.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:24.450Z,1520533104.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:24.465Z,1520533104.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-08T18:18:24.466Z,1520533104.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:24.857Z,1520533104.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:24.872Z,1520533104.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T18:18:24.885Z,1520533104.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:25.266Z,1520533105.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:25.338Z,1520533105.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2018-03-08T18:18:25.339Z,1520533105.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:25.657Z,1520533105.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:25.696Z,1520533105.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-08T18:18:25.697Z,1520533105.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:26.049Z,1520533106.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:26.064Z,1520533106.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-08T18:18:26.065Z,1520533106.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:26.455Z,1520533106.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:26.512Z,1520533106.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-08T18:18:26.513Z,1520533106.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:26.851Z,1520533106.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:26.866Z,1520533106.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-08T18:18:26.867Z,1520533106.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:27.247Z,1520533107.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:27.262Z,1520533107.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-08T18:18:27.263Z,1520533107.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:27.642Z,1520533107.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:27.662Z,1520533107.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-08T18:18:27.663Z,1520533107.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:28.058Z,1520533108.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:28.073Z,1520533108.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-08T18:18:28.073Z,1520533108.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:28.457Z,1520533108.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:28.472Z,1520533108.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-08T18:18:28.473Z,1520533108.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:28.857Z,1520533108.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:28.872Z,1520533108.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-08T18:18:28.873Z,1520533108.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:29.248Z,1520533109.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:29.291Z,1520533109.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T18:18:29.292Z,1520533109.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:29.636Z,1520533109.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:29.651Z,1520533109.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-08T18:18:29.652Z,1520533109.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:30.045Z,1520533110.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:30.060Z,1520533110.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T18:18:30.061Z,1520533110.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:30.442Z,1520533110.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:30.462Z,1520533110.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T18:18:30.463Z,1520533110.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:30.848Z,1520533110.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:30.863Z,1520533110.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T18:18:30.864Z,1520533110.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:31.258Z,1520533111.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:31.286Z,1520533111.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T18:18:31.287Z,1520533111.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:31.653Z,1520533111.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:31.697Z,1520533111.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T18:18:31.698Z,1520533111.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:32.050Z,1520533112.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:32.065Z,1520533112.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-08T18:18:32.066Z,1520533112.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:32.454Z,1520533112.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:32.474Z,1520533112.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-08T18:18:32.475Z,1520533112.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:32.855Z,1520533112.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:32.869Z,1520533112.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-08T18:18:32.870Z,1520533112.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:33.255Z,1520533113.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:33.270Z,1520533113.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-08T18:18:33.271Z,1520533113.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:33.651Z,1520533113.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:33.666Z,1520533113.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-08T18:18:33.667Z,1520533113.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:34.059Z,1520533114.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:34.074Z,1520533114.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T18:18:34.075Z,1520533114.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:34.461Z,1520533114.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:34.476Z,1520533114.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-08T18:18:34.477Z,1520533114.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:34.859Z,1520533114.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:34.875Z,1520533114.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T18:18:34.876Z,1520533114.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:35.253Z,1520533115.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:35.268Z,1520533115.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T18:18:35.269Z,1520533115.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:35.649Z,1520533115.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:35.664Z,1520533115.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T18:18:35.665Z,1520533115.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:36.055Z,1520533116.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:36.070Z,1520533116.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T18:18:36.071Z,1520533116.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:36.449Z,1520533116.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:36.464Z,1520533116.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-08T18:18:36.465Z,1520533116.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:36.857Z,1520533116.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:36.872Z,1520533116.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T18:18:36.873Z,1520533116.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:37.273Z,1520533117.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:37.303Z,1520533117.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-08T18:18:37.304Z,1520533117.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:37.661Z,1520533117.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:37.675Z,1520533117.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-08T18:18:37.676Z,1520533117.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:38.050Z,1520533118.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:38.065Z,1520533118.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T18:18:38.066Z,1520533118.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:38.454Z,1520533118.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:38.474Z,1520533118.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T18:18:38.475Z,1520533118.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:38.850Z,1520533118.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:38.864Z,1520533118.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T18:18:38.865Z,1520533118.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:39.255Z,1520533119.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:39.271Z,1520533119.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:39.655Z,1520533119.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:39.674Z,1520533119.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:40.059Z,1520533120.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:40.075Z,1520533120.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:40.461Z,1520533120.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:40.476Z,1520533120.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:40.859Z,1520533120.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:40.883Z,1520533120.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:41.253Z,1520533121.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:41.268Z,1520533121.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:41.649Z,1520533121.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:41.664Z,1520533121.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:42.055Z,1520533122.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:42.070Z,1520533122.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:42.455Z,1520533122.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:42.470Z,1520533122.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:42.860Z,1520533122.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:42.875Z,1520533122.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:43.261Z,1520533123.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:43.276Z,1520533123.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:43.659Z,1520533123.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:43.674Z,1520533123.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:44.050Z,1520533124.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:44.066Z,1520533124.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:44.447Z,1520533124.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:44.470Z,1520533124.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:44.850Z,1520533124.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:44.865Z,1520533124.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:45.257Z,1520533125.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:45.272Z,1520533125.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:45.650Z,1520533125.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:45.665Z,1520533125.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:46.059Z,1520533126.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:46.082Z,1520533126.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:46.461Z,1520533126.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:46.477Z,1520533126.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:46.860Z,1520533126.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:46.883Z,1520533126.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:47.252Z,1520533127.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:47.267Z,1520533127.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:47.650Z,1520533127.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:47.666Z,1520533127.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:48.048Z,1520533128.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:48.075Z,1520533128.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:48.455Z,1520533128.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:48.470Z,1520533128.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:48.863Z,1520533128.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:48.878Z,1520533128.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:49.266Z,1520533129.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:49.281Z,1520533129.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:49.665Z,1520533129.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:49.686Z,1520533129.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:50.040Z,1520533130.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:50.072Z,1520533130.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:50.455Z,1520533130.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:50.474Z,1520533130.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:50.842Z,1520533130.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:50.874Z,1520533130.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:51.255Z,1520533131.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:51.272Z,1520533131.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:51.642Z,1520533131.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:51.675Z,1520533131.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:52.066Z,1520533132.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:52.082Z,1520533132.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:52.461Z,1520533132.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:52.477Z,1520533132.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:52.857Z,1520533132.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:52.885Z,1520533132.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:53.246Z,1520533133.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:53.278Z,1520533133.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:53.640Z,1520533133.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:53.667Z,1520533133.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:54.048Z,1520533134.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:54.074Z,1520533134.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:54.438Z,1520533134.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:54.474Z,1520533134.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:54.849Z,1520533134.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:54.876Z,1520533134.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:55.263Z,1520533135.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:55.291Z,1520533135.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:55.661Z,1520533135.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:55.682Z,1520533135.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:56.040Z,1520533136.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:56.064Z,1520533136.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:56.442Z,1520533136.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:56.478Z,1520533136.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:56.846Z,1520533136.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:56.879Z,1520533136.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:57.241Z,1520533137.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:57.256Z,1520533137.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:57.643Z,1520533137.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:57.679Z,1520533137.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:58.057Z,1520533138.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:58.087Z,1520533138.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:58.457Z,1520533138.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:58.483Z,1520533138.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:58.876Z,1520533138.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:58.898Z,1520533138.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:59.245Z,1520533139.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:59.260Z,1520533139.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:18:59.639Z,1520533139.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:18:59.655Z,1520533139.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:00.056Z,1520533140.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:00.084Z,1520533140.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:00.449Z,1520533140.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:00.487Z,1520533140.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:00.849Z,1520533140.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:00.874Z,1520533140.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:01.262Z,1520533141.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:01.284Z,1520533141.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:01.661Z,1520533141.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:01.685Z,1520533141.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:02.043Z,1520533142.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:02.058Z,1520533142.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:02.450Z,1520533142.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:02.491Z,1520533142.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:02.850Z,1520533142.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:02.871Z,1520533142.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:03.243Z,1520533143.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:03.259Z,1520533143.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:03.648Z,1520533143.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:03.663Z,1520533143.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:04.061Z,1520533144.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:04.095Z,1520533144.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:04.465Z,1520533144.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:04.490Z,1520533144.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:04.865Z,1520533144.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:04.890Z,1520533144.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:05.254Z,1520533145.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:05.295Z,1520533145.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:05.643Z,1520533145.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:05.659Z,1520533145.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:06.051Z,1520533146.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:06.066Z,1520533146.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:06.447Z,1520533146.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:06.462Z,1520533146.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:06.853Z,1520533146.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:06.869Z,1520533146.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:07.261Z,1520533147.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:07.288Z,1520533147.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:07.662Z,1520533147.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:07.695Z,1520533147.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:08.045Z,1520533148.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:08.060Z,1520533148.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:08.452Z,1520533148.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:08.467Z,1520533148.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:08.849Z,1520533148.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:08.864Z,1520533148.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:09.251Z,1520533149.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:09.266Z,1520533149.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:09.647Z,1520533149.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:09.663Z,1520533149.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:10.065Z,1520533150.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:10.095Z,1520533150.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:10.454Z,1520533150.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:10.469Z,1520533150.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:10.865Z,1520533150.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:10.896Z,1520533150.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:11.248Z,1520533151.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:11.263Z,1520533151.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:11.647Z,1520533151.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:11.662Z,1520533151.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:12.052Z,1520533152.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:12.067Z,1520533152.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:12.451Z,1520533152.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:12.468Z,1520533152.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:12.853Z,1520533152.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:12.869Z,1520533152.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:13.265Z,1520533153.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:13.280Z,1520533153.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:13.657Z,1520533153.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:13.673Z,1520533153.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:14.048Z,1520533154.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:14.064Z,1520533154.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:14.454Z,1520533154.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:14.470Z,1520533154.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:14.854Z,1520533154.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:14.869Z,1520533154.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:15.256Z,1520533155.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:15.271Z,1520533155.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:15.654Z,1520533155.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:15.669Z,1520533155.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:16.057Z,1520533156.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:16.073Z,1520533156.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:16.461Z,1520533156.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:16.476Z,1520533156.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:19.566Z,1520533159.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:19.607Z,1520533159.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:19.680Z,1520533159.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:19.723Z,1520533159.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:20.063Z,1520533160.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:20.079Z,1520533160.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:20.463Z,1520533160.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:20.479Z,1520533160.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:20.877Z,1520533160.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:20.906Z,1520533160.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:21.273Z,1520533161.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:21.299Z,1520533161.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:21.665Z,1520533161.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:21.681Z,1520533161.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:22.064Z,1520533162.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:22.079Z,1520533162.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:22.462Z,1520533162.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:22.483Z,1520533162.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:22.864Z,1520533162.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:22.887Z,1520533162.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:23.266Z,1520533163.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:23.281Z,1520533163.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:23.663Z,1520533163.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:23.678Z,1520533163.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:24.070Z,1520533164.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:24.086Z,1520533164.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:24.481Z,1520533164.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:24.511Z,1520533164.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:24.869Z,1520533164.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:24.885Z,1520533164.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:25.267Z,1520533165.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:25.283Z,1520533165.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:25.666Z,1520533165.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:25.687Z,1520533165.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:26.066Z,1520533166.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:26.087Z,1520533166.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:26.467Z,1520533166.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:26.483Z,1520533166.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:26.869Z,1520533166.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:26.885Z,1520533166.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:27.281Z,1520533167.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:27.312Z,1520533167.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:27.673Z,1520533167.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:27.689Z,1520533167.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:28.063Z,1520533168.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:28.078Z,1520533168.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:28.467Z,1520533168.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:28.483Z,1520533168.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:28.855Z,1520533168.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:28.887Z,1520533168.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:29.268Z,1520533169.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:29.283Z,1520533169.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:29.657Z,1520533169.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:29.687Z,1520533169.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:30.078Z,1520533170.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:30.098Z,1520533170.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:30.477Z,1520533170.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:30.493Z,1520533170.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:30.875Z,1520533170.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:30.891Z,1520533170.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:31.250Z,1520533171.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:31.278Z,1520533171.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:31.655Z,1520533171.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:31.687Z,1520533171.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:32.055Z,1520533172.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:32.083Z,1520533172.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:32.450Z,1520533172.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:32.483Z,1520533172.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:32.868Z,1520533172.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:32.884Z,1520533172.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:33.277Z,1520533173.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:33.299Z,1520533173.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:33.677Z,1520533173.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:33.693Z,1520533173.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:34.066Z,1520533174.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:34.081Z,1520533174.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:34.472Z,1520533174.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:34.494Z,1520533174.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:34.866Z,1520533174.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:34.887Z,1520533174.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:35.251Z,1520533175.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:35.283Z,1520533175.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:35.668Z,1520533175.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:35.684Z,1520533175.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:36.065Z,1520533176.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:36.097Z,1520533176.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:36.480Z,1520533176.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:36.495Z,1520533176.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:36.877Z,1520533176.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:36.898Z,1520533176.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:37.255Z,1520533177.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:37.283Z,1520533177.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:37.650Z,1520533177.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:37.683Z,1520533177.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:38.060Z,1520533178.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:38.087Z,1520533178.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:38.455Z,1520533178.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:38.491Z,1520533178.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:38.878Z,1520533178.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:38.893Z,1520533178.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:39.275Z,1520533179.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:39.295Z,1520533179.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:39.679Z,1520533179.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:39.702Z,1520533179.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:40.059Z,1520533180.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:40.087Z,1520533180.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:40.458Z,1520533180.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:40.475Z,1520533180.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:40.854Z,1520533180.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:40.875Z,1520533180.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:41.263Z,1520533181.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:41.278Z,1520533181.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:41.662Z,1520533181.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:41.683Z,1520533181.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:42.077Z,1520533182.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:42.111Z,1520533182.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:42.477Z,1520533182.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:42.509Z,1520533182.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:42.869Z,1520533182.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:42.885Z,1520533182.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:43.259Z,1520533183.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:43.275Z,1520533183.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:43.662Z,1520533183.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:43.677Z,1520533183.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:44.061Z,1520533184.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:44.089Z,1520533184.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:44.466Z,1520533184.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:44.482Z,1520533184.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:44.871Z,1520533184.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:44.887Z,1520533184.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:45.274Z,1520533185.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:45.289Z,1520533185.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:45.668Z,1520533185.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:45.684Z,1520533185.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:46.058Z,1520533186.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:46.073Z,1520533186.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:46.463Z,1520533186.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:46.478Z,1520533186.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:46.866Z,1520533186.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:46.887Z,1520533186.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:47.266Z,1520533187.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:47.283Z,1520533187.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:47.663Z,1520533187.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:47.678Z,1520533187.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:48.073Z,1520533188.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:48.089Z,1520533188.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:48.471Z,1520533188.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:48.487Z,1520533188.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:48.872Z,1520533188.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:48.888Z,1520533188.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:49.266Z,1520533189.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:49.287Z,1520533189.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:49.665Z,1520533189.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:49.681Z,1520533189.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:50.061Z,1520533190.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:50.083Z,1520533190.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:50.457Z,1520533190.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:50.485Z,1520533190.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:50.876Z,1520533190.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:50.892Z,1520533190.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:51.276Z,1520533191.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:51.298Z,1520533191.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:51.676Z,1520533191.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:51.698Z,1520533191.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:52.066Z,1520533192.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:52.082Z,1520533192.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:52.457Z,1520533192.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:52.481Z,1520533192.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:52.861Z,1520533192.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:52.889Z,1520533192.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:53.266Z,1520533193.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:53.282Z,1520533193.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:53.654Z,1520533193.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:53.687Z,1520533193.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:54.077Z,1520533194.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:54.098Z,1520533194.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:54.479Z,1520533194.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:54.495Z,1520533194.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:54.878Z,1520533194.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:54.898Z,1520533194.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:55.265Z,1520533195.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:55.285Z,1520533195.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:55.654Z,1520533195.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:55.687Z,1520533195.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:56.068Z,1520533196.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:56.083Z,1520533196.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:56.454Z,1520533196.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:56.487Z,1520533196.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:56.877Z,1520533196.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:56.893Z,1520533196.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:57.277Z,1520533197.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:57.298Z,1520533197.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:57.677Z,1520533197.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:57.698Z,1520533197.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:58.066Z,1520533198.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:58.082Z,1520533198.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:58.454Z,1520533198.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:58.490Z,1520533198.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:58.865Z,1520533198.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:58.885Z,1520533198.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:59.266Z,1520533199.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:59.282Z,1520533199.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:19:59.655Z,1520533199.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:19:59.694Z,1520533199.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:00.076Z,1520533200.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:00.098Z,1520533200.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:00.480Z,1520533200.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:00.495Z,1520533200.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:00.877Z,1520533200.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:00.898Z,1520533200.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:01.265Z,1520533201.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:01.285Z,1520533201.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:01.654Z,1520533201.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:01.690Z,1520533201.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:02.068Z,1520533202.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:02.083Z,1520533202.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:02.455Z,1520533202.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:02.483Z,1520533202.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:02.868Z,1520533202.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:02.884Z,1520533202.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:03.277Z,1520533203.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:03.298Z,1520533203.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:03.676Z,1520533203.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:03.699Z,1520533203.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:04.066Z,1520533204.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:04.081Z,1520533204.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:04.472Z,1520533204.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:04.488Z,1520533204.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:04.854Z,1520533204.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:04.887Z,1520533204.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:05.255Z,1520533205.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:05.291Z,1520533205.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:05.658Z,1520533205.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:05.685Z,1520533205.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:06.073Z,1520533206.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:06.089Z,1520533206.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:06.479Z,1520533206.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:06.498Z,1520533206.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:06.882Z,1520533206.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:06.897Z,1520533206.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:07.256Z,1520533207.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:07.284Z,1520533207.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:07.651Z,1520533207.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:07.687Z,1520533207.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:08.060Z,1520533208.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:08.087Z,1520533208.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:08.454Z,1520533208.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:08.491Z,1520533208.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:08.869Z,1520533208.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:08.893Z,1520533208.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:09.277Z,1520533209.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:09.305Z,1520533209.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:09.665Z,1520533209.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:09.698Z,1520533209.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:10.054Z,1520533210.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:10.092Z,1520533210.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:10.454Z,1520533210.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:10.492Z,1520533210.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:10.854Z,1520533210.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:10.892Z,1520533210.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:11.259Z,1520533211.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:11.291Z,1520533211.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:11.658Z,1520533211.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:11.697Z,1520533211.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:12.069Z,1520533212.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:12.097Z,1520533212.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:12.469Z,1520533212.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:12.496Z,1520533212.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:12.873Z,1520533212.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:12.907Z,1520533212.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:13.254Z,1520533213.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:13.274Z,1520533213.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:13.662Z,1520533213.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:13.677Z,1520533213.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:14.064Z,1520533214.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:14.079Z,1520533214.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:14.464Z,1520533214.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:14.479Z,1520533214.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:14.873Z,1520533214.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:14.901Z,1520533214.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:15.277Z,1520533215.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:15.311Z,1520533215.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:15.314Z,1520533215.314 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T18:20:15.314Z,1520533215.314 [Default:CheckIn:C.Wait] Stopped
2018-03-08T18:20:15.314Z,1520533215.314 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T18:20:15.315Z,1520533215.315 [Default:CheckIn:D] Running Loop=1
2018-03-08T18:20:15.662Z,1520533215.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:15.686Z,1520533215.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:15.689Z,1520533215.689 [Default:CheckIn:D] Stopped
2018-03-08T18:20:15.690Z,1520533215.690 [Default:CheckIn:E] Running Loop=1
2018-03-08T18:20:16.054Z,1520533216.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:16.086Z,1520533216.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:16.093Z,1520533216.093 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 634.514714 min 
2018-03-08T18:20:16.093Z,1520533216.093 [Default:CheckIn:E] Stopped
2018-03-08T18:20:16.093Z,1520533216.093 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T18:20:16.094Z,1520533216.094 [Default:CheckIn] Stopped
2018-03-08T18:20:16.094Z,1520533216.094 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T18:20:16.094Z,1520533216.094 [Default:CheckIn](INFO): Running loop #62
2018-03-08T18:20:16.094Z,1520533216.094 [Default:CheckIn] Running Loop=62
2018-03-08T18:20:16.094Z,1520533216.094 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T18:20:16.094Z,1520533216.094 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T18:20:16.454Z,1520533216.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:16.479Z,1520533216.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:19.563Z,1520533219.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:19.582Z,1520533219.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:19.684Z,1520533219.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:19.723Z,1520533219.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:20.063Z,1520533220.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:20.078Z,1520533220.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:20.449Z,1520533220.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:20.473Z,1520533220.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:20.845Z,1520533220.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:20.876Z,1520533220.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:21.235Z,1520533221.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:21.251Z,1520533221.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:21.638Z,1520533221.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:21.653Z,1520533221.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:22.032Z,1520533222.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:22.047Z,1520533222.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:22.436Z,1520533222.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:22.451Z,1520533222.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:22.845Z,1520533222.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:22.880Z,1520533222.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:23.245Z,1520533223.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:23.277Z,1520533223.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:23.649Z,1520533223.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:23.673Z,1520533223.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:24.035Z,1520533224.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:24.050Z,1520533224.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:24.431Z,1520533224.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:24.447Z,1520533224.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:24.839Z,1520533224.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:24.854Z,1520533224.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:25.239Z,1520533225.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:25.254Z,1520533225.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:25.631Z,1520533225.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:25.647Z,1520533225.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:26.049Z,1520533226.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:26.081Z,1520533226.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:26.453Z,1520533226.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:26.479Z,1520533226.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:26.845Z,1520533226.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:26.881Z,1520533226.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:27.239Z,1520533227.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:27.255Z,1520533227.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:27.636Z,1520533227.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:27.665Z,1520533227.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:28.043Z,1520533228.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:28.058Z,1520533228.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:28.439Z,1520533228.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:28.458Z,1520533228.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:28.849Z,1520533228.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:28.864Z,1520533228.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:29.252Z,1520533229.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:29.274Z,1520533229.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:29.652Z,1520533229.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:29.674Z,1520533229.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:30.043Z,1520533230.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:30.062Z,1520533230.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:30.442Z,1520533230.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:30.462Z,1520533230.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:30.842Z,1520533230.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:30.862Z,1520533230.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:31.239Z,1520533231.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:31.254Z,1520533231.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:31.628Z,1520533231.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:31.660Z,1520533231.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:32.053Z,1520533232.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:32.068Z,1520533232.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:32.453Z,1520533232.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:32.470Z,1520533232.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:32.846Z,1520533232.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:32.877Z,1520533232.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:33.235Z,1520533233.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:33.261Z,1520533233.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:33.634Z,1520533233.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:33.667Z,1520533233.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:34.035Z,1520533234.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:34.061Z,1520533234.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:34.430Z,1520533234.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:34.462Z,1520533234.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:34.850Z,1520533234.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:34.865Z,1520533234.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:35.248Z,1520533235.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:35.263Z,1520533235.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:35.649Z,1520533235.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:35.664Z,1520533235.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:36.030Z,1520533236.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:36.067Z,1520533236.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:36.434Z,1520533236.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:36.460Z,1520533236.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:36.829Z,1520533236.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:36.862Z,1520533236.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:37.231Z,1520533237.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:37.268Z,1520533237.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:37.634Z,1520533237.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:37.660Z,1520533237.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:38.014Z,1520533238.014 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T18:20:38.014Z,1520533238.014 [NAL9602] Data Fault, FailCount= 4
2018-03-08T18:20:38.014Z,1520533238.014 [NAL9602](ERROR): Data Fault
2018-03-08T18:20:38.031Z,1520533238.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:38.080Z,1520533238.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:38.106Z,1520533238.106 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T18:20:38.418Z,1520533238.418 [NAL9602](INFO): Powering down
2018-03-08T18:20:38.435Z,1520533238.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:38.467Z,1520533238.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:38.826Z,1520533238.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:38.857Z,1520533238.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:39.234Z,1520533239.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:39.266Z,1520533239.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:39.278Z,1520533239.278 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T18:20:39.278Z,1520533239.278 [NAL9602] No Fault, FailCount= 4
2018-03-08T18:20:39.634Z,1520533239.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:39.667Z,1520533239.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:40.026Z,1520533240.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:40.063Z,1520533240.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:40.434Z,1520533240.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:40.471Z,1520533240.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:40.832Z,1520533240.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:40.871Z,1520533240.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:41.230Z,1520533241.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:41.245Z,1520533241.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:41.634Z,1520533241.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:41.649Z,1520533241.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:42.031Z,1520533242.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:42.047Z,1520533242.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:42.437Z,1520533242.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:42.452Z,1520533242.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:42.840Z,1520533242.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:42.855Z,1520533242.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:43.240Z,1520533243.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:43.262Z,1520533243.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:43.639Z,1520533243.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:43.654Z,1520533243.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:44.041Z,1520533244.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:44.056Z,1520533244.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:44.441Z,1520533244.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:44.462Z,1520533244.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:44.839Z,1520533244.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:44.855Z,1520533244.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:45.237Z,1520533245.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:45.252Z,1520533245.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:45.636Z,1520533245.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:45.651Z,1520533245.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:46.039Z,1520533246.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:46.055Z,1520533246.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:46.439Z,1520533246.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:46.454Z,1520533246.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:46.831Z,1520533246.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:46.846Z,1520533246.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:47.237Z,1520533247.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:47.252Z,1520533247.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:47.638Z,1520533247.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:47.654Z,1520533247.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:48.035Z,1520533248.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:48.050Z,1520533248.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:48.439Z,1520533248.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:48.455Z,1520533248.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:48.838Z,1520533248.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:48.853Z,1520533248.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:49.234Z,1520533249.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:49.249Z,1520533249.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:49.635Z,1520533249.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:49.650Z,1520533249.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:50.039Z,1520533250.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:50.054Z,1520533250.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:50.439Z,1520533250.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:50.454Z,1520533250.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:50.837Z,1520533250.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:50.853Z,1520533250.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:51.240Z,1520533251.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:51.254Z,1520533251.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:51.635Z,1520533251.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:51.651Z,1520533251.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:52.034Z,1520533252.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:52.050Z,1520533252.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:52.440Z,1520533252.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:52.454Z,1520533252.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:52.835Z,1520533252.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:52.850Z,1520533252.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:53.239Z,1520533253.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:53.255Z,1520533253.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:53.639Z,1520533253.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:53.654Z,1520533253.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:54.035Z,1520533254.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:54.050Z,1520533254.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:54.440Z,1520533254.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:54.456Z,1520533254.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:54.836Z,1520533254.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:54.851Z,1520533254.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:55.239Z,1520533255.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:55.254Z,1520533255.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:55.639Z,1520533255.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:55.654Z,1520533255.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:56.037Z,1520533256.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:56.052Z,1520533256.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:56.439Z,1520533256.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:56.454Z,1520533256.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:56.839Z,1520533256.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:56.854Z,1520533256.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:57.239Z,1520533257.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:57.254Z,1520533257.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:57.635Z,1520533257.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:57.650Z,1520533257.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:58.039Z,1520533258.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:58.054Z,1520533258.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:58.436Z,1520533258.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:58.459Z,1520533258.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:58.835Z,1520533258.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:58.850Z,1520533258.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:59.239Z,1520533259.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:59.255Z,1520533259.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:20:59.637Z,1520533259.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:20:59.652Z,1520533259.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:00.035Z,1520533260.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:00.050Z,1520533260.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:00.441Z,1520533260.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:00.456Z,1520533260.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:00.841Z,1520533260.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:00.856Z,1520533260.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:01.241Z,1520533261.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:01.256Z,1520533261.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:01.641Z,1520533261.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:01.656Z,1520533261.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:02.041Z,1520533262.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:02.056Z,1520533262.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:02.440Z,1520533262.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:02.456Z,1520533262.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:02.841Z,1520533262.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:02.856Z,1520533262.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:03.241Z,1520533263.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:03.255Z,1520533263.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:03.635Z,1520533263.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:03.650Z,1520533263.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:04.042Z,1520533264.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:04.057Z,1520533264.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:04.438Z,1520533264.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:04.453Z,1520533264.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:04.835Z,1520533264.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:04.850Z,1520533264.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:05.241Z,1520533265.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:05.262Z,1520533265.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:05.632Z,1520533265.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:05.659Z,1520533265.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:06.035Z,1520533266.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:06.051Z,1520533266.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:06.437Z,1520533266.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:06.452Z,1520533266.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:06.842Z,1520533266.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:06.857Z,1520533266.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:07.237Z,1520533267.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:07.252Z,1520533267.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:07.642Z,1520533267.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:07.657Z,1520533267.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:08.037Z,1520533268.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:08.052Z,1520533268.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:08.435Z,1520533268.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:08.450Z,1520533268.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:08.818Z,1520533268.818 [NAL9602](INFO): Powering up NAL9602
2018-03-08T18:21:08.848Z,1520533268.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:08.864Z,1520533268.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:09.242Z,1520533269.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:09.257Z,1520533269.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:09.642Z,1520533269.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:09.657Z,1520533269.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:10.042Z,1520533270.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:10.058Z,1520533270.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:10.432Z,1520533270.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:10.463Z,1520533270.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:10.841Z,1520533270.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:10.857Z,1520533270.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:11.233Z,1520533271.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:11.255Z,1520533271.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:11.642Z,1520533271.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:11.657Z,1520533271.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:12.035Z,1520533272.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:12.050Z,1520533272.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:12.438Z,1520533272.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:12.453Z,1520533272.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:12.833Z,1520533272.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:12.855Z,1520533272.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:13.237Z,1520533273.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:13.252Z,1520533273.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:13.643Z,1520533273.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:13.658Z,1520533273.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:14.038Z,1520533274.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:14.053Z,1520533274.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:14.433Z,1520533274.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:14.458Z,1520533274.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:14.842Z,1520533274.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:14.857Z,1520533274.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:15.233Z,1520533275.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:15.255Z,1520533275.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:15.637Z,1520533275.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:15.653Z,1520533275.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:16.038Z,1520533276.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:16.053Z,1520533276.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:16.446Z,1520533276.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:16.461Z,1520533276.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:16.838Z,1520533276.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:16.853Z,1520533276.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:19.947Z,1520533279.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:19.963Z,1520533279.963 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:19.963Z,1520533279.963 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 212
2018-03-08T18:21:19.963Z,1520533279.963 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T18:21:19.965Z,1520533279.965 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:19.965Z,1520533279.965 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 212
2018-03-08T18:21:19.965Z,1520533279.965 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T18:21:19.967Z,1520533279.967 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:19.967Z,1520533279.967 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 212
2018-03-08T18:21:19.967Z,1520533279.967 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T18:21:19.999Z,1520533279.999 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T18:21:19.999Z,1520533279.999 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T18:21:19.000Z,1520533280.000 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T18:21:20.082Z,1520533280.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:20.141Z,1520533280.141 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T18:21:20.141Z,1520533280.141 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 212
2018-03-08T18:21:20.142Z,1520533280.142 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T18:21:20.142Z,1520533280.142 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 212
2018-03-08T18:21:20.142Z,1520533280.142 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T18:21:20.142Z,1520533280.142 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 212
2018-03-08T18:21:20.434Z,1520533280.434 [NAL9602](INFO): NAL9602 initialized
2018-03-08T18:21:20.465Z,1520533280.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:20.480Z,1520533280.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T18:21:20.480Z,1520533280.480 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:21:20.481Z,1520533280.481 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:21:20.481Z,1520533280.481 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T18:21:20.481Z,1520533280.481 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:21:20.482Z,1520533280.482 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:21:20.482Z,1520533280.482 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T18:21:20.482Z,1520533280.482 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:21:20.483Z,1520533280.483 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:21:20.842Z,1520533280.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:20.869Z,1520533280.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-03-08T18:21:20.870Z,1520533280.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:21.274Z,1520533281.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:21.294Z,1520533281.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-03-08T18:21:21.295Z,1520533281.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:21.670Z,1520533281.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:21.685Z,1520533281.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-03-08T18:21:21.686Z,1520533281.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:22.053Z,1520533282.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:22.076Z,1520533282.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-03-08T18:21:22.077Z,1520533282.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:22.443Z,1520533282.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:22.470Z,1520533282.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-03-08T18:21:22.471Z,1520533282.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:22.839Z,1520533282.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:22.879Z,1520533282.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-03-08T18:21:22.880Z,1520533282.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:23.238Z,1520533283.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:23.274Z,1520533283.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-03-08T18:21:23.275Z,1520533283.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:23.662Z,1520533283.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:23.677Z,1520533283.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-08T18:21:23.678Z,1520533283.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:24.061Z,1520533284.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:24.085Z,1520533284.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-03-08T18:21:24.086Z,1520533284.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:24.466Z,1520533284.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:24.481Z,1520533284.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-03-08T18:21:24.482Z,1520533284.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:24.847Z,1520533284.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:24.875Z,1520533284.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-08T18:21:24.876Z,1520533284.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:25.237Z,1520533285.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:25.277Z,1520533285.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-08T18:21:25.278Z,1520533285.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:25.649Z,1520533285.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:25.687Z,1520533285.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T18:21:25.687Z,1520533285.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:26.064Z,1520533286.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:26.093Z,1520533286.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T18:21:26.094Z,1520533286.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:26.469Z,1520533286.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:26.485Z,1520533286.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-08T18:21:26.486Z,1520533286.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:26.839Z,1520533286.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:26.866Z,1520533286.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-08T18:21:26.867Z,1520533286.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:27.242Z,1520533287.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:27.278Z,1520533287.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-08T18:21:27.279Z,1520533287.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:27.653Z,1520533287.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:27.680Z,1520533287.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-08T18:21:27.681Z,1520533287.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:28.054Z,1520533288.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:28.086Z,1520533288.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-08T18:21:28.087Z,1520533288.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:28.466Z,1520533288.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:28.481Z,1520533288.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-08T18:21:28.482Z,1520533288.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:28.843Z,1520533288.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:28.874Z,1520533288.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-08T18:21:28.875Z,1520533288.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:29.246Z,1520533289.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:29.277Z,1520533289.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-08T18:21:29.278Z,1520533289.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:29.657Z,1520533289.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:29.683Z,1520533289.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-08T18:21:29.684Z,1520533289.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:30.057Z,1520533290.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:30.085Z,1520533290.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T18:21:30.086Z,1520533290.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:30.453Z,1520533290.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:30.480Z,1520533290.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-08T18:21:30.481Z,1520533290.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:30.849Z,1520533290.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:30.864Z,1520533290.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T18:21:30.881Z,1520533290.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:31.251Z,1520533291.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:31.266Z,1520533291.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T18:21:31.267Z,1520533291.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:31.661Z,1520533291.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:31.693Z,1520533291.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T18:21:31.694Z,1520533291.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:32.065Z,1520533292.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:32.095Z,1520533292.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T18:21:32.096Z,1520533292.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:32.466Z,1520533292.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:32.491Z,1520533292.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T18:21:32.492Z,1520533292.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:32.855Z,1520533292.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:32.871Z,1520533292.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-08T18:21:32.872Z,1520533292.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:33.250Z,1520533293.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:33.267Z,1520533293.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-08T18:21:33.267Z,1520533293.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:33.666Z,1520533293.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:33.695Z,1520533293.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-08T18:21:33.697Z,1520533293.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:34.061Z,1520533294.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:34.076Z,1520533294.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-08T18:21:34.089Z,1520533294.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:34.465Z,1520533294.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:34.496Z,1520533294.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-08T18:21:34.497Z,1520533294.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:34.851Z,1520533294.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:34.867Z,1520533294.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T18:21:34.868Z,1520533294.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:35.248Z,1520533295.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:35.267Z,1520533295.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-08T18:21:35.268Z,1520533295.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:35.657Z,1520533295.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:35.672Z,1520533295.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T18:21:35.673Z,1520533295.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:36.061Z,1520533296.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:36.076Z,1520533296.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T18:21:36.077Z,1520533296.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:36.459Z,1520533296.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:36.474Z,1520533296.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T18:21:36.475Z,1520533296.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:36.856Z,1520533296.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:36.870Z,1520533296.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T18:21:36.871Z,1520533296.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:37.249Z,1520533297.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:37.265Z,1520533297.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-08T18:21:37.265Z,1520533297.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:37.659Z,1520533297.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:37.675Z,1520533297.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T18:21:37.675Z,1520533297.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:38.060Z,1520533298.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:38.082Z,1520533298.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-08T18:21:38.083Z,1520533298.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:38.464Z,1520533298.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:38.479Z,1520533298.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-08T18:21:38.480Z,1520533298.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:38.854Z,1520533298.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:38.869Z,1520533298.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T18:21:38.870Z,1520533298.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:39.254Z,1520533299.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:39.269Z,1520533299.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T18:21:39.270Z,1520533299.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:39.660Z,1520533299.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:39.676Z,1520533299.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T18:21:39.677Z,1520533299.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:40.063Z,1520533300.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:40.079Z,1520533300.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:40.465Z,1520533300.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:40.480Z,1520533300.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:40.855Z,1520533300.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:40.871Z,1520533300.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:41.254Z,1520533301.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:41.269Z,1520533301.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:41.661Z,1520533301.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:41.679Z,1520533301.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:42.063Z,1520533302.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:42.079Z,1520533302.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:42.464Z,1520533302.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:42.479Z,1520533302.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:42.856Z,1520533302.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:42.871Z,1520533302.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:43.255Z,1520533303.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:43.270Z,1520533303.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:43.664Z,1520533303.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:43.679Z,1520533303.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:44.064Z,1520533304.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:44.079Z,1520533304.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:44.465Z,1520533304.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:44.486Z,1520533304.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:44.854Z,1520533304.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:44.870Z,1520533304.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:45.249Z,1520533305.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:45.270Z,1520533305.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:45.664Z,1520533305.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:45.686Z,1520533305.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:46.065Z,1520533306.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:46.080Z,1520533306.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:46.465Z,1520533306.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:46.481Z,1520533306.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:46.855Z,1520533306.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:46.870Z,1520533306.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:47.238Z,1520533307.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:47.271Z,1520533307.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:47.666Z,1520533307.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:47.681Z,1520533307.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:48.059Z,1520533308.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:48.079Z,1520533308.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:48.464Z,1520533308.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:48.480Z,1520533308.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:48.847Z,1520533308.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:48.874Z,1520533308.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:49.238Z,1520533309.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:49.275Z,1520533309.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:49.665Z,1520533309.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:49.680Z,1520533309.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:50.065Z,1520533310.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:50.096Z,1520533310.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:50.465Z,1520533310.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:50.480Z,1520533310.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:50.843Z,1520533310.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:50.874Z,1520533310.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:51.246Z,1520533311.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:51.279Z,1520533311.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:51.665Z,1520533311.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:51.681Z,1520533311.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:52.066Z,1520533312.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:52.081Z,1520533312.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:52.453Z,1520533312.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:52.491Z,1520533312.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:52.851Z,1520533312.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:52.881Z,1520533312.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:53.247Z,1520533313.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:53.270Z,1520533313.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:53.657Z,1520533313.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:53.683Z,1520533313.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:54.058Z,1520533314.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:54.085Z,1520533314.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:54.453Z,1520533314.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:54.489Z,1520533314.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:54.851Z,1520533314.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:54.866Z,1520533314.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:55.250Z,1520533315.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:55.270Z,1520533315.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:55.661Z,1520533315.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:55.697Z,1520533315.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:56.062Z,1520533316.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:56.098Z,1520533316.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:56.457Z,1520533316.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:56.473Z,1520533316.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:56.853Z,1520533316.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:56.869Z,1520533316.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:57.250Z,1520533317.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:57.269Z,1520533317.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:57.294Z,1520533317.294 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T18:21:57.657Z,1520533317.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:57.673Z,1520533317.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:58.057Z,1520533318.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:58.072Z,1520533318.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:58.457Z,1520533318.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:58.473Z,1520533318.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:58.854Z,1520533318.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:58.869Z,1520533318.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:59.248Z,1520533319.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:59.271Z,1520533319.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:21:59.657Z,1520533319.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:21:59.673Z,1520533319.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:00.061Z,1520533320.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:00.077Z,1520533320.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:00.456Z,1520533320.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:00.472Z,1520533320.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:00.855Z,1520533320.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:00.871Z,1520533320.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:01.255Z,1520533321.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:01.270Z,1520533321.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:01.669Z,1520533321.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:01.705Z,1520533321.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:02.061Z,1520533322.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:02.077Z,1520533322.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:02.459Z,1520533322.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:02.478Z,1520533322.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:02.854Z,1520533322.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:02.870Z,1520533322.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:03.254Z,1520533323.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:03.271Z,1520533323.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:03.660Z,1520533323.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:03.676Z,1520533323.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:04.059Z,1520533324.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:04.075Z,1520533324.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:04.461Z,1520533324.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:04.483Z,1520533324.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:04.855Z,1520533324.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:04.870Z,1520533324.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:05.254Z,1520533325.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:05.269Z,1520533325.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:05.660Z,1520533325.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:05.676Z,1520533325.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:06.059Z,1520533326.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:06.075Z,1520533326.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:06.457Z,1520533326.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:06.472Z,1520533326.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:06.856Z,1520533326.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:06.870Z,1520533326.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:07.254Z,1520533327.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:07.274Z,1520533327.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:07.660Z,1520533327.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:07.675Z,1520533327.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:08.065Z,1520533328.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:08.080Z,1520533328.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:08.461Z,1520533328.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:08.476Z,1520533328.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:08.851Z,1520533328.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:08.867Z,1520533328.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:09.252Z,1520533329.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:09.266Z,1520533329.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:09.660Z,1520533329.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:09.676Z,1520533329.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:10.060Z,1520533330.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:10.075Z,1520533330.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:10.461Z,1520533330.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:10.477Z,1520533330.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:10.855Z,1520533330.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:10.871Z,1520533330.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:11.255Z,1520533331.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:11.270Z,1520533331.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:11.660Z,1520533331.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:11.675Z,1520533331.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:12.062Z,1520533332.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:12.077Z,1520533332.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:12.457Z,1520533332.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:12.473Z,1520533332.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:12.852Z,1520533332.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:12.866Z,1520533332.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:13.255Z,1520533333.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:13.271Z,1520533333.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:13.659Z,1520533333.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:13.675Z,1520533333.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:14.061Z,1520533334.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:14.076Z,1520533334.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:14.456Z,1520533334.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:14.472Z,1520533334.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:14.854Z,1520533334.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:14.870Z,1520533334.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:15.247Z,1520533335.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:15.274Z,1520533335.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:15.656Z,1520533335.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:15.672Z,1520533335.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:16.060Z,1520533336.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:16.075Z,1520533336.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:16.460Z,1520533336.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:16.475Z,1520533336.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:16.855Z,1520533336.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:16.870Z,1520533336.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:19.948Z,1520533339.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:19.964Z,1520533339.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:20.085Z,1520533340.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:20.126Z,1520533340.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:20.433Z,1520533340.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:20.457Z,1520533340.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:20.826Z,1520533340.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:20.860Z,1520533340.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:21.218Z,1520533341.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:21.238Z,1520533341.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:21.616Z,1520533341.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:21.631Z,1520533341.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:22.020Z,1520533342.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:22.035Z,1520533342.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:22.415Z,1520533342.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:22.431Z,1520533342.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:22.834Z,1520533342.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:22.862Z,1520533342.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:23.233Z,1520533343.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:23.265Z,1520533343.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:23.617Z,1520533343.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:23.633Z,1520533343.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:24.019Z,1520533344.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:24.034Z,1520533344.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:24.419Z,1520533344.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:24.434Z,1520533344.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:24.816Z,1520533344.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:24.831Z,1520533344.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:25.215Z,1520533345.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:25.231Z,1520533345.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:25.629Z,1520533345.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:25.644Z,1520533345.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:26.016Z,1520533346.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:26.038Z,1520533346.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:26.429Z,1520533346.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:26.444Z,1520533346.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:26.820Z,1520533346.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:26.835Z,1520533346.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:27.222Z,1520533347.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:27.237Z,1520533347.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:27.622Z,1520533347.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:27.638Z,1520533347.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:28.021Z,1520533348.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:28.036Z,1520533348.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:28.433Z,1520533348.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:28.465Z,1520533348.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:28.821Z,1520533348.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:28.836Z,1520533348.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:29.214Z,1520533349.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:29.234Z,1520533349.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:29.622Z,1520533349.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:29.639Z,1520533349.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:30.029Z,1520533350.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:30.044Z,1520533350.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:30.425Z,1520533350.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:30.446Z,1520533350.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:30.817Z,1520533350.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:30.832Z,1520533350.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:31.218Z,1520533351.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:31.233Z,1520533351.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:31.624Z,1520533351.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:31.646Z,1520533351.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:32.025Z,1520533352.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:32.041Z,1520533352.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:32.426Z,1520533352.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:32.441Z,1520533352.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:32.823Z,1520533352.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:32.838Z,1520533352.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:33.242Z,1520533353.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:33.270Z,1520533353.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:33.624Z,1520533353.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:33.646Z,1520533353.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:34.029Z,1520533354.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:34.044Z,1520533354.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:34.426Z,1520533354.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:34.442Z,1520533354.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:34.820Z,1520533354.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:34.835Z,1520533354.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:35.223Z,1520533355.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:35.238Z,1520533355.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:35.620Z,1520533355.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:35.651Z,1520533355.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:36.029Z,1520533356.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:36.045Z,1520533356.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:36.426Z,1520533356.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:36.441Z,1520533356.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:36.824Z,1520533356.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:36.839Z,1520533356.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:37.218Z,1520533357.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:37.238Z,1520533357.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:37.629Z,1520533357.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:37.644Z,1520533357.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:38.028Z,1520533358.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:38.044Z,1520533358.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:38.426Z,1520533358.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:38.443Z,1520533358.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:38.820Z,1520533358.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:38.835Z,1520533358.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:39.228Z,1520533359.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:39.244Z,1520533359.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:39.627Z,1520533359.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:39.643Z,1520533359.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:40.028Z,1520533360.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:40.043Z,1520533360.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:40.425Z,1520533360.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:40.441Z,1520533360.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:40.823Z,1520533360.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:40.846Z,1520533360.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:41.223Z,1520533361.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:41.239Z,1520533361.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:41.628Z,1520533361.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:41.644Z,1520533361.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:42.029Z,1520533362.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:42.044Z,1520533362.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:42.428Z,1520533362.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:42.443Z,1520533362.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:42.820Z,1520533362.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:42.835Z,1520533362.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:43.215Z,1520533363.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:43.246Z,1520533363.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:43.629Z,1520533363.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:43.644Z,1520533363.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:44.026Z,1520533364.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:44.046Z,1520533364.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:44.434Z,1520533364.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:44.449Z,1520533364.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:44.820Z,1520533364.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:44.835Z,1520533364.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:45.223Z,1520533365.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:45.242Z,1520533365.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:45.629Z,1520533365.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:45.644Z,1520533365.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:46.033Z,1520533366.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:46.054Z,1520533366.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:46.432Z,1520533366.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:46.448Z,1520533366.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:46.817Z,1520533366.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:46.839Z,1520533366.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:47.217Z,1520533367.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:47.243Z,1520533367.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:47.620Z,1520533367.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:47.655Z,1520533367.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:48.031Z,1520533368.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:48.055Z,1520533368.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:48.432Z,1520533368.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:48.447Z,1520533368.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:48.820Z,1520533368.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:48.835Z,1520533368.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:49.213Z,1520533369.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:49.236Z,1520533369.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:49.629Z,1520533369.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:49.644Z,1520533369.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:50.028Z,1520533370.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:50.043Z,1520533370.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:50.428Z,1520533370.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:50.443Z,1520533370.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:50.831Z,1520533370.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:50.889Z,1520533370.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:51.211Z,1520533371.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:51.238Z,1520533371.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:51.621Z,1520533371.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:51.646Z,1520533371.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:52.025Z,1520533372.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:52.082Z,1520533372.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:52.422Z,1520533372.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:52.449Z,1520533372.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:52.811Z,1520533372.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:52.828Z,1520533372.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:53.211Z,1520533373.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:53.238Z,1520533373.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:53.621Z,1520533373.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:53.642Z,1520533373.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:54.043Z,1520533374.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:54.058Z,1520533374.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:54.435Z,1520533374.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:54.454Z,1520533374.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:54.813Z,1520533374.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:54.828Z,1520533374.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:55.215Z,1520533375.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:55.230Z,1520533375.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:55.625Z,1520533375.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:55.657Z,1520533375.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:56.017Z,1520533376.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:56.033Z,1520533376.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:56.433Z,1520533376.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:56.457Z,1520533376.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:56.816Z,1520533376.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:56.831Z,1520533376.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:57.219Z,1520533377.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:57.234Z,1520533377.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:57.630Z,1520533377.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:57.660Z,1520533377.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:58.033Z,1520533378.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:58.066Z,1520533378.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:58.429Z,1520533378.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:58.461Z,1520533378.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:58.823Z,1520533378.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:58.838Z,1520533378.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:59.220Z,1520533379.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:59.242Z,1520533379.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:22:59.617Z,1520533379.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:22:59.634Z,1520533379.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:00.029Z,1520533380.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:00.044Z,1520533380.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:00.433Z,1520533380.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:00.465Z,1520533380.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:00.818Z,1520533380.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:00.833Z,1520533380.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:01.222Z,1520533381.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:01.237Z,1520533381.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:01.622Z,1520533381.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:01.637Z,1520533381.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:02.021Z,1520533382.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:02.037Z,1520533382.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:02.433Z,1520533382.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:02.448Z,1520533382.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:02.823Z,1520533382.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:02.839Z,1520533382.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:03.211Z,1520533383.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:03.232Z,1520533383.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:03.623Z,1520533383.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:03.646Z,1520533383.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:04.029Z,1520533384.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:04.045Z,1520533384.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:04.426Z,1520533384.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:04.442Z,1520533384.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:04.822Z,1520533384.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:04.842Z,1520533384.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:05.222Z,1520533385.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:05.241Z,1520533385.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:05.645Z,1520533385.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:05.669Z,1520533385.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:06.025Z,1520533386.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:06.040Z,1520533386.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:06.425Z,1520533386.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:06.441Z,1520533386.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:06.822Z,1520533386.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:06.843Z,1520533386.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:07.219Z,1520533387.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:07.235Z,1520533387.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:07.624Z,1520533387.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:07.647Z,1520533387.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:08.029Z,1520533388.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:08.045Z,1520533388.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:08.424Z,1520533388.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:08.439Z,1520533388.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:08.818Z,1520533388.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:08.841Z,1520533388.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:09.220Z,1520533389.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:09.241Z,1520533389.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:09.628Z,1520533389.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:09.644Z,1520533389.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:10.033Z,1520533390.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:10.048Z,1520533390.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:10.425Z,1520533390.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:10.440Z,1520533390.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:10.815Z,1520533390.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:10.838Z,1520533390.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:11.213Z,1520533391.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:11.247Z,1520533391.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:11.622Z,1520533391.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:11.643Z,1520533391.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:12.033Z,1520533392.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:12.048Z,1520533392.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:12.430Z,1520533392.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:12.450Z,1520533392.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:12.827Z,1520533392.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:12.843Z,1520533392.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:13.217Z,1520533393.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:13.238Z,1520533393.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:13.633Z,1520533393.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:13.655Z,1520533393.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:14.033Z,1520533394.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:14.054Z,1520533394.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:14.431Z,1520533394.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:14.454Z,1520533394.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:14.825Z,1520533394.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:14.841Z,1520533394.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:15.217Z,1520533395.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:15.238Z,1520533395.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:15.630Z,1520533395.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:15.645Z,1520533395.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:16.034Z,1520533396.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:16.050Z,1520533396.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:16.425Z,1520533396.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:16.441Z,1520533396.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:16.820Z,1520533396.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:16.846Z,1520533396.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:17.223Z,1520533397.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:17.238Z,1520533397.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:20.741Z,1520533400.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:20.757Z,1520533400.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:20.871Z,1520533400.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:20.906Z,1520533400.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:21.253Z,1520533401.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:21.286Z,1520533401.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:21.635Z,1520533401.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:21.650Z,1520533401.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:22.047Z,1520533402.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:22.062Z,1520533402.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:22.440Z,1520533402.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:22.455Z,1520533402.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:22.842Z,1520533402.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:22.858Z,1520533402.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:23.245Z,1520533403.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:23.260Z,1520533403.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:23.653Z,1520533403.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:23.668Z,1520533403.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:24.028Z,1520533404.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:24.058Z,1520533404.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:24.441Z,1520533404.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:24.456Z,1520533404.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:24.840Z,1520533404.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:24.855Z,1520533404.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:25.240Z,1520533405.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:25.255Z,1520533405.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:25.653Z,1520533405.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:25.689Z,1520533405.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:26.049Z,1520533406.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:26.064Z,1520533406.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:26.446Z,1520533406.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:26.461Z,1520533406.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:26.839Z,1520533406.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:26.855Z,1520533406.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:27.239Z,1520533407.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:27.254Z,1520533407.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:27.644Z,1520533407.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:27.666Z,1520533407.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:28.049Z,1520533408.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:28.070Z,1520533408.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:28.448Z,1520533408.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:28.464Z,1520533408.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:28.843Z,1520533408.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:28.859Z,1520533408.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:29.238Z,1520533409.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:29.253Z,1520533409.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:29.646Z,1520533409.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:29.661Z,1520533409.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:30.044Z,1520533410.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:30.059Z,1520533410.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:30.448Z,1520533410.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:30.463Z,1520533410.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:30.844Z,1520533410.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:30.859Z,1520533410.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:31.238Z,1520533411.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:31.258Z,1520533411.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:31.648Z,1520533411.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:31.663Z,1520533411.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:32.048Z,1520533412.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:32.063Z,1520533412.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:32.449Z,1520533412.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:32.464Z,1520533412.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:32.843Z,1520533412.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:32.858Z,1520533412.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:33.243Z,1520533413.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:33.258Z,1520533413.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:33.648Z,1520533413.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:33.663Z,1520533413.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:34.049Z,1520533414.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:34.065Z,1520533414.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:34.450Z,1520533414.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:34.465Z,1520533414.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:34.843Z,1520533414.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:34.858Z,1520533414.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:35.243Z,1520533415.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:35.258Z,1520533415.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:35.648Z,1520533415.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:35.663Z,1520533415.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:36.048Z,1520533416.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:36.063Z,1520533416.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:36.448Z,1520533416.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:36.464Z,1520533416.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:36.844Z,1520533416.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:36.859Z,1520533416.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:37.243Z,1520533417.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:37.262Z,1520533417.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:37.648Z,1520533417.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:37.670Z,1520533417.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:38.048Z,1520533418.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:38.088Z,1520533418.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:38.447Z,1520533418.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:38.463Z,1520533418.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:38.843Z,1520533418.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:38.859Z,1520533418.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:39.244Z,1520533419.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:39.260Z,1520533419.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:39.647Z,1520533419.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:39.663Z,1520533419.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:40.048Z,1520533420.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:40.070Z,1520533420.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:40.448Z,1520533420.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:40.470Z,1520533420.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:40.841Z,1520533420.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:40.856Z,1520533420.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:41.238Z,1520533421.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:41.254Z,1520533421.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:41.648Z,1520533421.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:41.664Z,1520533421.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:42.048Z,1520533422.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:42.063Z,1520533422.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:42.447Z,1520533422.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:42.463Z,1520533422.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:42.844Z,1520533422.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:42.860Z,1520533422.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:43.242Z,1520533423.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:43.262Z,1520533423.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:43.647Z,1520533423.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:43.663Z,1520533423.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:44.050Z,1520533424.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:44.065Z,1520533424.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:44.446Z,1520533424.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:44.471Z,1520533424.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:44.844Z,1520533424.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:44.859Z,1520533424.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:45.243Z,1520533425.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:45.259Z,1520533425.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:45.641Z,1520533425.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:45.673Z,1520533425.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:46.056Z,1520533426.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:46.071Z,1520533426.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:46.450Z,1520533426.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:46.465Z,1520533426.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:46.844Z,1520533426.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:46.859Z,1520533426.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:47.230Z,1520533427.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:47.262Z,1520533427.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:47.650Z,1520533427.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:47.665Z,1520533427.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:48.055Z,1520533428.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:48.071Z,1520533428.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:48.452Z,1520533428.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:48.467Z,1520533428.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:48.832Z,1520533428.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:48.864Z,1520533428.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:49.235Z,1520533429.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:49.261Z,1520533429.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:49.649Z,1520533429.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:49.664Z,1520533429.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:50.049Z,1520533430.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:50.073Z,1520533430.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:50.437Z,1520533430.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:50.463Z,1520533430.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:50.831Z,1520533430.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:50.860Z,1520533430.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:51.231Z,1520533431.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:51.267Z,1520533431.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:51.654Z,1520533431.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:51.669Z,1520533431.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:52.053Z,1520533432.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:52.069Z,1520533432.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:52.441Z,1520533432.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:52.479Z,1520533432.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:52.835Z,1520533432.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:52.867Z,1520533432.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:53.235Z,1520533433.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:53.250Z,1520533433.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:53.649Z,1520533433.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:53.675Z,1520533433.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:54.049Z,1520533434.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:54.071Z,1520533434.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:54.450Z,1520533434.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:54.475Z,1520533434.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:54.839Z,1520533434.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:54.855Z,1520533434.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:55.239Z,1520533435.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:55.258Z,1520533435.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:55.650Z,1520533435.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:55.682Z,1520533435.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:56.053Z,1520533436.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:56.085Z,1520533436.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:56.445Z,1520533436.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:56.461Z,1520533436.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:56.843Z,1520533436.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:56.858Z,1520533436.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:57.243Z,1520533437.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:57.259Z,1520533437.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:57.644Z,1520533437.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:57.660Z,1520533437.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:58.050Z,1520533438.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:58.065Z,1520533438.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:58.446Z,1520533438.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:58.461Z,1520533438.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:58.833Z,1520533438.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:58.854Z,1520533438.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:59.238Z,1520533439.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:59.254Z,1520533439.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:23:59.644Z,1520533439.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:23:59.663Z,1520533439.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:00.049Z,1520533440.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:00.065Z,1520533440.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:00.446Z,1520533440.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:00.461Z,1520533440.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:00.843Z,1520533440.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:00.858Z,1520533440.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:01.228Z,1520533441.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:01.255Z,1520533441.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:01.649Z,1520533441.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:01.664Z,1520533441.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:02.049Z,1520533442.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:02.064Z,1520533442.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:02.449Z,1520533442.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:02.464Z,1520533442.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:02.843Z,1520533442.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:02.859Z,1520533442.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:03.244Z,1520533443.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:03.259Z,1520533443.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:03.648Z,1520533443.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:03.670Z,1520533443.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:04.052Z,1520533444.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:04.067Z,1520533444.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:04.447Z,1520533444.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:04.462Z,1520533444.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:04.844Z,1520533444.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:04.859Z,1520533444.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:05.237Z,1520533445.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:05.259Z,1520533445.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:05.646Z,1520533445.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:05.666Z,1520533445.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:06.052Z,1520533446.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:06.068Z,1520533446.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:06.449Z,1520533446.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:06.464Z,1520533446.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:06.839Z,1520533446.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:06.855Z,1520533446.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:07.243Z,1520533447.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:07.259Z,1520533447.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:07.648Z,1520533447.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:07.670Z,1520533447.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:08.052Z,1520533448.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:08.068Z,1520533448.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:08.452Z,1520533448.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:08.474Z,1520533448.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:08.843Z,1520533448.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:08.858Z,1520533448.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:09.238Z,1520533449.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:09.258Z,1520533449.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:09.652Z,1520533449.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:09.667Z,1520533449.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:10.052Z,1520533450.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:10.067Z,1520533450.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:10.445Z,1520533450.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:10.460Z,1520533450.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:10.844Z,1520533450.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:10.859Z,1520533450.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:11.237Z,1520533451.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:11.256Z,1520533451.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:11.646Z,1520533451.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:11.661Z,1520533451.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:12.052Z,1520533452.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:12.067Z,1520533452.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:12.452Z,1520533452.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:12.474Z,1520533452.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:12.844Z,1520533452.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:12.859Z,1520533452.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:13.242Z,1520533453.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:13.262Z,1520533453.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:13.648Z,1520533453.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:13.664Z,1520533453.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:14.049Z,1520533454.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:14.064Z,1520533454.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:14.446Z,1520533454.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:14.461Z,1520533454.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:14.836Z,1520533454.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:14.859Z,1520533454.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:15.243Z,1520533455.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:15.258Z,1520533455.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:15.653Z,1520533455.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:15.668Z,1520533455.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:16.055Z,1520533456.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:16.070Z,1520533456.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:16.453Z,1520533456.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:16.468Z,1520533456.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:16.843Z,1520533456.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:16.859Z,1520533456.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:17.230Z,1520533457.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:17.262Z,1520533457.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:20.353Z,1520533460.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:20.369Z,1520533460.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:20.481Z,1520533460.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:20.523Z,1520533460.523 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:20.523Z,1520533460.523 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 213
2018-03-08T18:24:20.523Z,1520533460.523 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T18:24:20.525Z,1520533460.525 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:20.525Z,1520533460.525 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 213
2018-03-08T18:24:20.525Z,1520533460.525 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T18:24:20.527Z,1520533460.527 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:20.527Z,1520533460.527 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 213
2018-03-08T18:24:20.527Z,1520533460.527 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T18:24:20.572Z,1520533460.572 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T18:24:20.572Z,1520533460.572 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T18:24:20.572Z,1520533460.572 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T18:24:20.865Z,1520533460.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:20.911Z,1520533460.911 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T18:24:20.911Z,1520533460.911 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 213
2018-03-08T18:24:20.911Z,1520533460.911 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T18:24:20.911Z,1520533460.911 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 213
2018-03-08T18:24:20.912Z,1520533460.912 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T18:24:20.912Z,1520533460.912 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 213
2018-03-08T18:24:21.242Z,1520533461.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:21.268Z,1520533461.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T18:24:21.269Z,1520533461.269 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:24:21.269Z,1520533461.269 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:24:21.269Z,1520533461.269 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T18:24:21.270Z,1520533461.270 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:24:21.270Z,1520533461.270 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:24:21.270Z,1520533461.270 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T18:24:21.271Z,1520533461.271 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:24:21.271Z,1520533461.271 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:24:21.658Z,1520533461.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:21.677Z,1520533461.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T18:24:21.678Z,1520533461.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:22.047Z,1520533462.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:22.073Z,1520533462.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T18:24:22.074Z,1520533462.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:22.446Z,1520533462.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:22.473Z,1520533462.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T18:24:22.474Z,1520533462.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:22.868Z,1520533462.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:22.883Z,1520533462.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T18:24:22.884Z,1520533462.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:23.268Z,1520533463.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:23.283Z,1520533463.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T18:24:23.284Z,1520533463.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:23.663Z,1520533463.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:23.689Z,1520533463.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T18:24:23.690Z,1520533463.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:24.047Z,1520533464.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:24.073Z,1520533464.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.5 s old, using for 20.0 s.
2018-03-08T18:24:24.074Z,1520533464.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:24.448Z,1520533464.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:24.475Z,1520533464.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T18:24:24.476Z,1520533464.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:24.851Z,1520533464.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:24.878Z,1520533464.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T18:24:24.878Z,1520533464.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:25.251Z,1520533465.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:25.276Z,1520533465.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T18:24:25.277Z,1520533465.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:25.665Z,1520533465.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:25.680Z,1520533465.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T18:24:25.681Z,1520533465.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:26.066Z,1520533466.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:26.080Z,1520533466.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T18:24:26.081Z,1520533466.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:26.466Z,1520533466.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:26.486Z,1520533466.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T18:24:26.487Z,1520533466.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:26.851Z,1520533466.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:26.877Z,1520533466.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T18:24:26.878Z,1520533466.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:27.242Z,1520533467.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:27.274Z,1520533467.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T18:24:27.275Z,1520533467.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:27.669Z,1520533467.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:27.684Z,1520533467.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T18:24:27.685Z,1520533467.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:28.075Z,1520533468.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:28.094Z,1520533468.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T18:24:28.095Z,1520533468.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:28.470Z,1520533468.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:28.484Z,1520533468.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T18:24:28.485Z,1520533468.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:28.847Z,1520533468.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:28.875Z,1520533468.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T18:24:28.876Z,1520533468.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:29.250Z,1520533469.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:29.276Z,1520533469.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T18:24:29.277Z,1520533469.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:29.653Z,1520533469.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:29.687Z,1520533469.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T18:24:29.688Z,1520533469.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:30.073Z,1520533470.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:30.088Z,1520533470.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T18:24:30.089Z,1520533470.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:30.465Z,1520533470.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:30.480Z,1520533470.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T18:24:30.481Z,1520533470.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:30.847Z,1520533470.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:30.879Z,1520533470.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T18:24:30.879Z,1520533470.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:31.251Z,1520533471.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:31.277Z,1520533471.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T18:24:31.278Z,1520533471.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:31.665Z,1520533471.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:31.680Z,1520533471.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T18:24:31.681Z,1520533471.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:32.069Z,1520533472.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:32.084Z,1520533472.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T18:24:32.085Z,1520533472.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:32.465Z,1520533472.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:32.480Z,1520533472.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T18:24:32.481Z,1520533472.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:32.847Z,1520533472.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:32.878Z,1520533472.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T18:24:32.879Z,1520533472.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:33.250Z,1520533473.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:33.283Z,1520533473.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T18:24:33.284Z,1520533473.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:33.669Z,1520533473.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:33.684Z,1520533473.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T18:24:33.685Z,1520533473.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:34.081Z,1520533474.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:34.105Z,1520533474.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T18:24:34.106Z,1520533474.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:34.473Z,1520533474.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:34.488Z,1520533474.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T18:24:34.489Z,1520533474.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:34.851Z,1520533474.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:34.882Z,1520533474.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T18:24:34.882Z,1520533474.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:35.247Z,1520533475.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:35.274Z,1520533475.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T18:24:35.274Z,1520533475.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:35.657Z,1520533475.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:35.685Z,1520533475.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T18:24:35.686Z,1520533475.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:36.058Z,1520533476.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:36.084Z,1520533476.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T18:24:36.085Z,1520533476.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:36.461Z,1520533476.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:36.487Z,1520533476.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T18:24:36.488Z,1520533476.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:36.848Z,1520533476.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:36.863Z,1520533476.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2018-03-08T18:24:36.863Z,1520533476.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:37.255Z,1520533477.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:37.286Z,1520533477.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T18:24:37.287Z,1520533477.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:37.665Z,1520533477.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:37.689Z,1520533477.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T18:24:37.690Z,1520533477.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:38.065Z,1520533478.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:38.090Z,1520533478.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T18:24:38.091Z,1520533478.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:38.466Z,1520533478.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:38.494Z,1520533478.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T18:24:38.495Z,1520533478.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:38.856Z,1520533478.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:38.871Z,1520533478.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-03-08T18:24:38.872Z,1520533478.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:39.252Z,1520533479.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:39.303Z,1520533479.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T18:24:39.304Z,1520533479.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:39.666Z,1520533479.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:39.697Z,1520533479.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T18:24:39.697Z,1520533479.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:40.066Z,1520533480.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:40.098Z,1520533480.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T18:24:40.099Z,1520533480.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:40.465Z,1520533480.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:40.498Z,1520533480.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T18:24:40.499Z,1520533480.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:40.856Z,1520533480.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:40.872Z,1520533480.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:41.252Z,1520533481.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:41.267Z,1520533481.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:41.669Z,1520533481.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:41.703Z,1520533481.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:42.053Z,1520533482.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:42.069Z,1520533482.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:42.465Z,1520533482.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:42.480Z,1520533482.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:42.856Z,1520533482.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:42.871Z,1520533482.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:43.250Z,1520533483.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:43.269Z,1520533483.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:43.657Z,1520533483.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:43.673Z,1520533483.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:44.057Z,1520533484.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:44.072Z,1520533484.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:44.457Z,1520533484.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:44.472Z,1520533484.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:44.853Z,1520533484.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:44.869Z,1520533484.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:45.252Z,1520533485.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:45.275Z,1520533485.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:45.658Z,1520533485.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:45.673Z,1520533485.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:46.062Z,1520533486.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:46.077Z,1520533486.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:46.469Z,1520533486.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:46.506Z,1520533486.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:46.843Z,1520533486.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:46.862Z,1520533486.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:47.254Z,1520533487.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:47.269Z,1520533487.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:47.658Z,1520533487.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:47.674Z,1520533487.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:48.059Z,1520533488.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:48.074Z,1520533488.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:48.458Z,1520533488.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:48.473Z,1520533488.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:48.861Z,1520533488.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:48.876Z,1520533488.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:49.260Z,1520533489.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:49.275Z,1520533489.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:49.661Z,1520533489.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:49.677Z,1520533489.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:50.055Z,1520533490.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:50.070Z,1520533490.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:50.453Z,1520533490.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:50.468Z,1520533490.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:50.854Z,1520533490.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:50.872Z,1520533490.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:51.253Z,1520533491.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:51.278Z,1520533491.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:51.659Z,1520533491.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:51.675Z,1520533491.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:52.061Z,1520533492.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:52.076Z,1520533492.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:52.461Z,1520533492.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:52.477Z,1520533492.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:52.854Z,1520533492.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:52.873Z,1520533492.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:53.258Z,1520533493.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:53.273Z,1520533493.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:53.660Z,1520533493.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:53.682Z,1520533493.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:54.060Z,1520533494.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:54.076Z,1520533494.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:54.462Z,1520533494.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:54.477Z,1520533494.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:54.855Z,1520533494.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:54.870Z,1520533494.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:55.249Z,1520533495.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:55.269Z,1520533495.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:55.659Z,1520533495.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:55.682Z,1520533495.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:56.065Z,1520533496.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:56.080Z,1520533496.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:56.460Z,1520533496.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:56.475Z,1520533496.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:56.857Z,1520533496.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:56.878Z,1520533496.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:57.255Z,1520533497.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:57.271Z,1520533497.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:57.659Z,1520533497.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:57.682Z,1520533497.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:58.061Z,1520533498.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:58.076Z,1520533498.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:58.461Z,1520533498.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:58.476Z,1520533498.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:58.858Z,1520533498.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:58.873Z,1520533498.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:59.254Z,1520533499.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:59.269Z,1520533499.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:24:59.660Z,1520533499.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:24:59.675Z,1520533499.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:00.058Z,1520533500.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:00.074Z,1520533500.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:00.464Z,1520533500.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:00.486Z,1520533500.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:00.860Z,1520533500.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:00.875Z,1520533500.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:01.258Z,1520533501.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:01.278Z,1520533501.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:01.664Z,1520533501.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:01.679Z,1520533501.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:02.065Z,1520533502.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:02.086Z,1520533502.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:02.459Z,1520533502.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:02.478Z,1520533502.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:02.854Z,1520533502.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:02.873Z,1520533502.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:03.249Z,1520533503.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:03.274Z,1520533503.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:03.664Z,1520533503.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:03.680Z,1520533503.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:04.062Z,1520533504.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:04.079Z,1520533504.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:04.465Z,1520533504.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:04.480Z,1520533504.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:04.857Z,1520533504.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:04.872Z,1520533504.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:05.252Z,1520533505.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:05.279Z,1520533505.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:05.661Z,1520533505.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:05.676Z,1520533505.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:06.064Z,1520533506.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:06.079Z,1520533506.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:06.463Z,1520533506.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:06.479Z,1520533506.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:06.861Z,1520533506.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:06.876Z,1520533506.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:07.258Z,1520533507.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:07.278Z,1520533507.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:07.664Z,1520533507.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:07.679Z,1520533507.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:08.065Z,1520533508.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:08.080Z,1520533508.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:08.460Z,1520533508.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:08.476Z,1520533508.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:08.854Z,1520533508.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:08.874Z,1520533508.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:09.259Z,1520533509.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:09.274Z,1520533509.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:09.664Z,1520533509.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:09.679Z,1520533509.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:10.065Z,1520533510.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:10.080Z,1520533510.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:10.464Z,1520533510.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:10.479Z,1520533510.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:10.859Z,1520533510.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:10.875Z,1520533510.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:11.252Z,1520533511.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:11.275Z,1520533511.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:11.666Z,1520533511.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:11.681Z,1520533511.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:12.060Z,1520533512.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:12.076Z,1520533512.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:12.464Z,1520533512.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:12.479Z,1520533512.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:12.860Z,1520533512.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:12.875Z,1520533512.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:13.260Z,1520533513.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:13.275Z,1520533513.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:13.665Z,1520533513.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:13.680Z,1520533513.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:14.065Z,1520533514.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:14.086Z,1520533514.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:14.470Z,1520533514.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:14.490Z,1520533514.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:14.856Z,1520533514.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:14.872Z,1520533514.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:15.243Z,1520533515.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:15.274Z,1520533515.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:15.658Z,1520533515.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:15.686Z,1520533515.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:16.072Z,1520533516.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:16.094Z,1520533516.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:16.098Z,1520533516.098 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T18:20:16.1Z
2018-03-08T18:25:16.098Z,1520533516.098 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T18:25:16.098Z,1520533516.098 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T18:25:16.467Z,1520533516.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:16.482Z,1520533516.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:16.948Z,1520533516.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:16.963Z,1520533516.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:17.253Z,1520533517.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:17.276Z,1520533517.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:20.365Z,1520533520.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:20.390Z,1520533520.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:20.494Z,1520533520.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:20.538Z,1520533520.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:20.821Z,1520533520.821 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0248.lzma
2018-03-08T18:25:20.861Z,1520533520.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:20.884Z,1520533520.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:21.247Z,1520533521.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:21.263Z,1520533521.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:21.615Z,1520533521.615 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0248.lzma.bak
2018-03-08T18:25:21.616Z,1520533521.616 [DataOverHttps](INFO): SBD MOMSN=7988041
2018-03-08T18:25:21.650Z,1520533521.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:21.679Z,1520533521.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:22.239Z,1520533522.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:22.256Z,1520533522.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:22.449Z,1520533522.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:22.520Z,1520533522.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:22.850Z,1520533522.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:22.865Z,1520533522.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:25.957Z,1520533525.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:25.972Z,1520533525.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:26.081Z,1520533526.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:26.137Z,1520533526.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:26.454Z,1520533526.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:26.475Z,1520533526.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:26.852Z,1520533526.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:26.867Z,1520533526.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:27.258Z,1520533527.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:27.279Z,1520533527.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:27.669Z,1520533527.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:27.701Z,1520533527.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:28.066Z,1520533528.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:28.081Z,1520533528.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:31.335Z,1520533531.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:31.366Z,1520533531.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:31.472Z,1520533531.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:31.487Z,1520533531.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:31.801Z,1520533531.801 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180308T074127/Express0249.lzma
2018-03-08T18:25:31.831Z,1520533531.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:31.866Z,1520533531.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:32.229Z,1520533532.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:32.261Z,1520533532.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:32.600Z,1520533532.600 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0249.lzma.bak
2018-03-08T18:25:32.600Z,1520533532.600 [DataOverHttps](INFO): SBD MOMSN=7988043
2018-03-08T18:25:32.657Z,1520533532.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:32.673Z,1520533532.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:33.225Z,1520533533.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:33.262Z,1520533533.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:33.265Z,1520533533.265 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T18:25:33.266Z,1520533533.266 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T18:25:33.266Z,1520533533.266 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T18:25:33.431Z,1520533533.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:33.459Z,1520533533.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:36.529Z,1520533536.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:36.561Z,1520533536.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:36.643Z,1520533536.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:36.671Z,1520533536.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:37.028Z,1520533537.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:37.044Z,1520533537.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:37.430Z,1520533537.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:37.451Z,1520533537.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:37.825Z,1520533537.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:37.841Z,1520533537.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:38.219Z,1520533538.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:38.267Z,1520533538.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:38.621Z,1520533538.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:38.648Z,1520533538.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:39.025Z,1520533539.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:39.040Z,1520533539.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:39.417Z,1520533539.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:39.439Z,1520533539.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:39.826Z,1520533539.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:39.844Z,1520533539.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:40.227Z,1520533540.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:40.246Z,1520533540.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:40.629Z,1520533540.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:40.644Z,1520533540.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:41.017Z,1520533541.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:41.038Z,1520533541.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:41.418Z,1520533541.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:41.464Z,1520533541.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:41.816Z,1520533541.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:41.850Z,1520533541.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:42.224Z,1520533542.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:42.243Z,1520533542.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:42.619Z,1520533542.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:42.673Z,1520533542.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:43.031Z,1520533543.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:43.047Z,1520533543.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:43.434Z,1520533543.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:43.450Z,1520533543.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:43.809Z,1520533543.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:43.837Z,1520533543.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:44.226Z,1520533544.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:44.241Z,1520533544.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:44.630Z,1520533544.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:44.654Z,1520533544.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:45.014Z,1520533545.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:45.055Z,1520533545.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:45.447Z,1520533545.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:45.463Z,1520533545.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:45.815Z,1520533545.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:45.843Z,1520533545.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:46.210Z,1520533546.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:46.248Z,1520533546.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:46.619Z,1520533546.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:46.655Z,1520533546.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:47.035Z,1520533547.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:47.050Z,1520533547.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:47.433Z,1520533547.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:47.449Z,1520533547.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:47.807Z,1520533547.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:47.850Z,1520533547.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:48.210Z,1520533548.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:48.243Z,1520533548.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:48.619Z,1520533548.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:48.654Z,1520533548.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:49.033Z,1520533549.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:49.049Z,1520533549.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:49.417Z,1520533549.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:49.449Z,1520533549.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:49.807Z,1520533549.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:49.843Z,1520533549.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:50.217Z,1520533550.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:50.262Z,1520533550.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:50.618Z,1520533550.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:50.650Z,1520533550.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:51.018Z,1520533551.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:51.055Z,1520533551.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:51.424Z,1520533551.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:51.455Z,1520533551.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:51.816Z,1520533551.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:51.842Z,1520533551.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:52.210Z,1520533552.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:52.244Z,1520533552.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:52.635Z,1520533552.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:52.650Z,1520533552.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:53.033Z,1520533553.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:53.049Z,1520533553.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:53.429Z,1520533553.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:53.448Z,1520533553.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:53.820Z,1520533553.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:53.844Z,1520533553.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:54.214Z,1520533554.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:54.245Z,1520533554.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:54.614Z,1520533554.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:54.639Z,1520533554.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:55.035Z,1520533555.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:55.055Z,1520533555.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:55.433Z,1520533555.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:55.448Z,1520533555.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:55.813Z,1520533555.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:55.850Z,1520533555.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:56.224Z,1520533556.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:56.246Z,1520533556.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:56.632Z,1520533556.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:56.648Z,1520533556.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:57.021Z,1520533557.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:57.051Z,1520533557.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:57.435Z,1520533557.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:57.450Z,1520533557.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:57.812Z,1520533557.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:57.842Z,1520533557.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:58.210Z,1520533558.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:58.243Z,1520533558.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:58.621Z,1520533558.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:58.645Z,1520533558.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:59.039Z,1520533559.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:59.054Z,1520533559.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:59.423Z,1520533559.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:59.448Z,1520533559.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:25:59.817Z,1520533559.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:25:59.849Z,1520533559.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:00.216Z,1520533560.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:00.251Z,1520533560.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:00.618Z,1520533560.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:00.647Z,1520533560.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:01.041Z,1520533561.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:01.074Z,1520533561.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:01.426Z,1520533561.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:01.458Z,1520533561.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:01.805Z,1520533561.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:01.827Z,1520533561.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:02.211Z,1520533562.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:02.255Z,1520533562.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:02.610Z,1520533562.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:02.655Z,1520533562.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:03.016Z,1520533563.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:03.055Z,1520533563.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:03.425Z,1520533563.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:03.461Z,1520533563.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:03.827Z,1520533563.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:03.860Z,1520533563.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:04.212Z,1520533564.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:04.231Z,1520533564.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:04.617Z,1520533564.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:04.632Z,1520533564.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:05.021Z,1520533565.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:05.035Z,1520533565.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:05.413Z,1520533565.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:05.454Z,1520533565.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:05.823Z,1520533565.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:05.859Z,1520533565.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:06.233Z,1520533566.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:06.259Z,1520533566.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:06.618Z,1520533566.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:06.633Z,1520533566.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:07.016Z,1520533567.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:07.058Z,1520533567.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:07.417Z,1520533567.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:07.456Z,1520533567.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:07.820Z,1520533567.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:07.835Z,1520533567.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:08.251Z,1520533568.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:08.267Z,1520533568.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:08.632Z,1520533568.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:08.660Z,1520533568.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:09.028Z,1520533569.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:09.059Z,1520533569.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:09.423Z,1520533569.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:09.439Z,1520533569.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:09.822Z,1520533569.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:09.837Z,1520533569.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:10.218Z,1520533570.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:10.258Z,1520533570.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:10.620Z,1520533570.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:10.658Z,1520533570.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:11.029Z,1520533571.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:11.044Z,1520533571.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:11.420Z,1520533571.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:11.442Z,1520533571.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:11.819Z,1520533571.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:11.861Z,1520533571.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:12.223Z,1520533572.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:12.247Z,1520533572.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:12.619Z,1520533572.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:12.658Z,1520533572.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:13.023Z,1520533573.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:13.046Z,1520533573.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:13.426Z,1520533573.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:13.445Z,1520533573.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:13.819Z,1520533573.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:13.837Z,1520533573.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:14.223Z,1520533574.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:14.247Z,1520533574.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:14.628Z,1520533574.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:14.644Z,1520533574.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:15.016Z,1520533575.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:15.043Z,1520533575.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:15.431Z,1520533575.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:15.470Z,1520533575.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:15.815Z,1520533575.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:15.851Z,1520533575.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:16.217Z,1520533576.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:16.238Z,1520533576.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:16.629Z,1520533576.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:16.650Z,1520533576.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:17.032Z,1520533577.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:17.047Z,1520533577.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:17.419Z,1520533577.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:17.446Z,1520533577.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:17.823Z,1520533577.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:17.839Z,1520533577.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:18.206Z,1520533578.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:18.247Z,1520533578.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:18.620Z,1520533578.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:18.659Z,1520533578.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:19.035Z,1520533579.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:19.055Z,1520533579.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:19.432Z,1520533579.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:19.448Z,1520533579.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:19.820Z,1520533579.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:19.859Z,1520533579.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:20.219Z,1520533580.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:20.269Z,1520533580.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:20.631Z,1520533580.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:20.651Z,1520533580.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:21.017Z,1520533581.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:21.045Z,1520533581.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:21.431Z,1520533581.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:21.447Z,1520533581.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:21.812Z,1520533581.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:21.843Z,1520533581.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:22.208Z,1520533582.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:22.247Z,1520533582.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:22.633Z,1520533582.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:22.649Z,1520533582.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:23.033Z,1520533583.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:23.048Z,1520533583.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:23.432Z,1520533583.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:23.455Z,1520533583.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:23.809Z,1520533583.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:23.837Z,1520533583.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:24.209Z,1520533584.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:24.243Z,1520533584.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:24.626Z,1520533584.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:24.649Z,1520533584.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:25.032Z,1520533585.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:25.055Z,1520533585.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:25.432Z,1520533585.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:25.447Z,1520533585.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:25.815Z,1520533585.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:25.841Z,1520533585.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:26.229Z,1520533586.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:26.246Z,1520533586.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:26.625Z,1520533586.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:26.658Z,1520533586.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:27.015Z,1520533587.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:27.046Z,1520533587.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:27.421Z,1520533587.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:27.443Z,1520533587.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:27.807Z,1520533587.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:27.842Z,1520533587.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:28.210Z,1520533588.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:28.241Z,1520533588.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:28.626Z,1520533588.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:28.647Z,1520533588.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:29.029Z,1520533589.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:29.044Z,1520533589.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:29.434Z,1520533589.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:29.449Z,1520533589.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:29.828Z,1520533589.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:29.843Z,1520533589.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:30.208Z,1520533590.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:30.238Z,1520533590.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:30.621Z,1520533590.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:30.644Z,1520533590.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:31.028Z,1520533591.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:31.051Z,1520533591.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:31.434Z,1520533591.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:31.454Z,1520533591.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:31.813Z,1520533591.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:31.840Z,1520533591.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:32.225Z,1520533592.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:32.241Z,1520533592.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:32.629Z,1520533592.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:32.650Z,1520533592.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:33.022Z,1520533593.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:33.054Z,1520533593.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:33.432Z,1520533593.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:33.447Z,1520533593.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:33.810Z,1520533593.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:33.849Z,1520533593.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:36.916Z,1520533596.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:36.942Z,1520533596.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:37.057Z,1520533597.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:37.073Z,1520533597.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:37.417Z,1520533597.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:37.446Z,1520533597.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:37.805Z,1520533597.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:37.846Z,1520533597.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:38.205Z,1520533598.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:38.225Z,1520533598.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:38.604Z,1520533598.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:38.626Z,1520533598.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:39.004Z,1520533599.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:39.050Z,1520533599.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:39.398Z,1520533599.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:39.424Z,1520533599.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:39.807Z,1520533599.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:39.825Z,1520533599.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:40.207Z,1520533600.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:40.223Z,1520533600.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:40.635Z,1520533600.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:40.651Z,1520533600.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:40.999Z,1520533600.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:41.030Z,1520533601.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:41.441Z,1520533601.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:41.469Z,1520533601.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:41.811Z,1520533601.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:41.827Z,1520533601.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:42.219Z,1520533602.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:42.267Z,1520533602.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:42.611Z,1520533602.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:42.655Z,1520533602.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:43.016Z,1520533603.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:43.032Z,1520533603.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:43.412Z,1520533603.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:43.427Z,1520533603.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:43.795Z,1520533603.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:43.839Z,1520533603.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:44.193Z,1520533604.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:44.242Z,1520533604.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:44.594Z,1520533604.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:44.626Z,1520533604.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:45.002Z,1520533605.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:45.031Z,1520533605.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:45.417Z,1520533605.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:45.450Z,1520533605.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:45.814Z,1520533605.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:45.850Z,1520533605.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:46.195Z,1520533606.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:46.227Z,1520533606.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:46.591Z,1520533606.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:46.630Z,1520533606.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:46.995Z,1520533606.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:47.024Z,1520533607.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:47.387Z,1520533607.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:47.402Z,1520533607.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:47.802Z,1520533607.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:47.835Z,1520533607.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:48.208Z,1520533608.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:48.248Z,1520533608.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:48.605Z,1520533608.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:48.650Z,1520533608.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:48.993Z,1520533608.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:49.038Z,1520533609.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:49.389Z,1520533609.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:49.425Z,1520533609.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:49.790Z,1520533609.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:49.811Z,1520533609.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:50.195Z,1520533610.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:50.211Z,1520533610.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:50.602Z,1520533610.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:50.638Z,1520533610.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:51.017Z,1520533611.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:51.040Z,1520533611.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:51.410Z,1520533611.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:51.447Z,1520533611.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:51.798Z,1520533611.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:51.833Z,1520533611.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:52.196Z,1520533612.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:52.211Z,1520533612.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:52.601Z,1520533612.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:52.621Z,1520533612.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:53.005Z,1520533613.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:53.019Z,1520533613.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:53.402Z,1520533613.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:53.443Z,1520533613.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:53.805Z,1520533613.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:53.826Z,1520533613.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:54.212Z,1520533614.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:54.228Z,1520533614.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:54.612Z,1520533614.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:54.650Z,1520533614.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:55.002Z,1520533615.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:55.051Z,1520533615.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:55.402Z,1520533615.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:55.422Z,1520533615.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:55.807Z,1520533615.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:55.868Z,1520533615.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:56.201Z,1520533616.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:56.217Z,1520533616.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:56.604Z,1520533616.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:56.652Z,1520533616.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:57.008Z,1520533617.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:57.028Z,1520533617.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:57.411Z,1520533617.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:57.431Z,1520533617.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:57.806Z,1520533617.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:57.826Z,1520533617.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:58.204Z,1520533618.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:58.250Z,1520533618.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:58.597Z,1520533618.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:58.620Z,1520533618.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:59.005Z,1520533619.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:59.024Z,1520533619.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:59.417Z,1520533619.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:59.433Z,1520533619.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:26:59.809Z,1520533619.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:26:59.848Z,1520533619.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:00.202Z,1520533620.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:00.223Z,1520533620.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:00.588Z,1520533620.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:00.620Z,1520533620.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:00.998Z,1520533620.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:01.022Z,1520533621.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:01.386Z,1520533621.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:01.418Z,1520533621.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:01.812Z,1520533621.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:01.832Z,1520533621.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:01.865Z,1520533621.865 [CBIT](INFO): Clearing failed state for component DropWeight
2018-03-08T18:27:01.865Z,1520533621.865 [DropWeight] No Fault, FailCount= 1
2018-03-08T18:27:02.220Z,1520533622.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:02.259Z,1520533622.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:02.617Z,1520533622.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:02.632Z,1520533622.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:03.004Z,1520533623.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:03.039Z,1520533623.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:03.403Z,1520533623.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:03.424Z,1520533623.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:03.787Z,1520533623.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:03.819Z,1520533623.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:04.209Z,1520533624.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:04.229Z,1520533624.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:04.603Z,1520533624.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:04.637Z,1520533624.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:05.018Z,1520533625.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:05.035Z,1520533625.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:05.419Z,1520533625.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:05.434Z,1520533625.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:05.821Z,1520533625.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:05.836Z,1520533625.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:06.203Z,1520533626.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:06.233Z,1520533626.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:06.588Z,1520533626.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:06.619Z,1520533626.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:06.988Z,1520533626.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:07.023Z,1520533627.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:07.396Z,1520533627.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:07.425Z,1520533627.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:07.817Z,1520533627.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:07.864Z,1520533627.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:08.219Z,1520533628.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:08.260Z,1520533628.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:08.617Z,1520533628.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:08.632Z,1520533628.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:08.991Z,1520533628.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:09.025Z,1520533629.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:09.391Z,1520533629.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:09.435Z,1520533629.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:09.795Z,1520533629.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:09.830Z,1520533629.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:10.194Z,1520533630.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:10.226Z,1520533630.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:10.591Z,1520533630.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:10.628Z,1520533630.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:11.013Z,1520533631.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:11.039Z,1520533631.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:11.415Z,1520533631.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:11.434Z,1520533631.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:11.818Z,1520533631.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:11.833Z,1520533631.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:12.187Z,1520533632.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:12.224Z,1520533632.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:12.595Z,1520533632.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:12.639Z,1520533632.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:12.995Z,1520533632.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:13.027Z,1520533633.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:13.386Z,1520533633.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:13.427Z,1520533633.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:13.821Z,1520533633.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:13.837Z,1520533633.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:14.227Z,1520533634.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:14.245Z,1520533634.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:14.614Z,1520533634.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:14.633Z,1520533634.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:14.995Z,1520533634.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:15.027Z,1520533635.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:15.391Z,1520533635.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:15.421Z,1520533635.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:15.791Z,1520533635.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:15.824Z,1520533635.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:16.196Z,1520533636.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:16.228Z,1520533636.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:16.595Z,1520533636.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:16.626Z,1520533636.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:16.999Z,1520533636.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:17.036Z,1520533637.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:17.418Z,1520533637.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:17.459Z,1520533637.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:17.814Z,1520533637.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:17.862Z,1520533637.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:18.195Z,1520533638.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:18.227Z,1520533638.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:18.598Z,1520533638.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:18.628Z,1520533638.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:18.991Z,1520533638.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:19.030Z,1520533639.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:19.394Z,1520533639.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:19.426Z,1520533639.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:19.821Z,1520533639.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:19.842Z,1520533639.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:20.220Z,1520533640.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:20.235Z,1520533640.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:20.606Z,1520533640.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:20.640Z,1520533640.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:20.999Z,1520533640.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:21.036Z,1520533641.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:21.395Z,1520533641.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:21.416Z,1520533641.416 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:21.416Z,1520533641.416 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 214
2018-03-08T18:27:21.416Z,1520533641.416 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T18:27:21.418Z,1520533641.418 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:21.418Z,1520533641.418 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 214
2018-03-08T18:27:21.418Z,1520533641.418 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T18:27:21.420Z,1520533641.420 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:21.420Z,1520533641.420 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 214
2018-03-08T18:27:21.420Z,1520533641.420 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T18:27:21.452Z,1520533641.452 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T18:27:21.452Z,1520533641.452 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T18:27:21.452Z,1520533641.452 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T18:27:21.797Z,1520533641.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:21.837Z,1520533641.837 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T18:27:21.837Z,1520533641.837 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 214
2018-03-08T18:27:21.838Z,1520533641.838 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T18:27:21.838Z,1520533641.838 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 214
2018-03-08T18:27:21.838Z,1520533641.838 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T18:27:21.838Z,1520533641.838 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 214
2018-03-08T18:27:22.195Z,1520533642.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:22.238Z,1520533642.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T18:27:22.238Z,1520533642.238 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:27:22.238Z,1520533642.238 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:27:22.239Z,1520533642.239 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T18:27:22.239Z,1520533642.239 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:27:22.240Z,1520533642.240 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:27:22.240Z,1520533642.240 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T18:27:22.241Z,1520533642.241 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:27:22.241Z,1520533642.241 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:27:22.603Z,1520533642.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:22.630Z,1520533642.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T18:27:22.631Z,1520533642.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:23.016Z,1520533643.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:23.030Z,1520533643.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T18:27:23.031Z,1520533643.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:23.417Z,1520533643.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:23.432Z,1520533643.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T18:27:23.433Z,1520533643.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:23.803Z,1520533643.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:23.849Z,1520533643.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T18:27:23.850Z,1520533643.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:24.201Z,1520533644.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:24.219Z,1520533644.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T18:27:24.221Z,1520533644.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:24.597Z,1520533644.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:24.622Z,1520533644.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T18:27:24.623Z,1520533644.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:25.016Z,1520533645.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:25.031Z,1520533645.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T18:27:25.032Z,1520533645.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:25.413Z,1520533645.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:25.451Z,1520533645.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T18:27:25.452Z,1520533645.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:25.804Z,1520533645.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:25.845Z,1520533645.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T18:27:25.846Z,1520533645.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:26.197Z,1520533646.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:26.231Z,1520533646.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T18:27:26.232Z,1520533646.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:26.610Z,1520533646.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:26.624Z,1520533646.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T18:27:26.625Z,1520533646.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:26.996Z,1520533646.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:27.042Z,1520533647.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T18:27:27.043Z,1520533647.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:27.392Z,1520533647.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:27.427Z,1520533647.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T18:27:27.429Z,1520533647.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:27.817Z,1520533647.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:27.838Z,1520533647.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T18:27:27.839Z,1520533647.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:28.216Z,1520533648.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:28.231Z,1520533648.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T18:27:28.232Z,1520533648.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:28.615Z,1520533648.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:28.658Z,1520533648.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T18:27:28.659Z,1520533648.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:28.991Z,1520533648.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:29.030Z,1520533649.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T18:27:29.031Z,1520533649.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:29.395Z,1520533649.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:29.428Z,1520533649.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T18:27:29.430Z,1520533649.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:29.791Z,1520533649.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:29.834Z,1520533649.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T18:27:29.835Z,1520533649.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:30.193Z,1520533650.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:30.236Z,1520533650.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T18:27:30.237Z,1520533650.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:30.588Z,1520533650.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:30.628Z,1520533650.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T18:27:30.633Z,1520533650.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:31.019Z,1520533651.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:31.035Z,1520533651.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T18:27:31.036Z,1520533651.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:31.422Z,1520533651.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:31.436Z,1520533651.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T18:27:31.438Z,1520533651.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:31.797Z,1520533651.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:31.838Z,1520533651.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T18:27:31.839Z,1520533651.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:32.212Z,1520533652.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:32.231Z,1520533652.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T18:27:32.232Z,1520533652.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:32.591Z,1520533652.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:32.627Z,1520533652.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T18:27:32.628Z,1520533652.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:32.997Z,1520533652.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:33.029Z,1520533653.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T18:27:33.030Z,1520533653.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:33.391Z,1520533653.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:33.419Z,1520533653.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T18:27:33.420Z,1520533653.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:33.797Z,1520533653.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:33.828Z,1520533653.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T18:27:33.829Z,1520533653.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:34.219Z,1520533654.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:34.235Z,1520533654.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T18:27:34.236Z,1520533654.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:37.318Z,1520533657.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:37.334Z,1520533657.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2018-03-08T18:27:37.335Z,1520533657.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:37.441Z,1520533657.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:37.456Z,1520533657.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T18:27:37.457Z,1520533657.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:37.792Z,1520533657.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:37.830Z,1520533657.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T18:27:37.831Z,1520533657.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:38.191Z,1520533658.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:38.228Z,1520533658.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T18:27:38.230Z,1520533658.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:38.588Z,1520533658.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:38.603Z,1520533658.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T18:27:38.604Z,1520533658.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:39.006Z,1520533659.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:39.033Z,1520533659.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T18:27:39.033Z,1520533659.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:39.404Z,1520533659.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:39.428Z,1520533659.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T18:27:39.429Z,1520533659.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:39.794Z,1520533659.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:39.834Z,1520533659.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T18:27:39.835Z,1520533659.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:40.190Z,1520533660.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:40.205Z,1520533660.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T18:27:40.206Z,1520533660.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:40.588Z,1520533660.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:40.603Z,1520533660.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T18:27:40.605Z,1520533660.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:40.989Z,1520533660.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:41.009Z,1520533661.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T18:27:41.009Z,1520533661.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:41.390Z,1520533661.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:41.405Z,1520533661.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T18:27:41.406Z,1520533661.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:41.806Z,1520533661.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:41.839Z,1520533661.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:42.194Z,1520533662.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:42.233Z,1520533662.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:42.608Z,1520533662.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:42.640Z,1520533662.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:42.995Z,1520533662.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:43.019Z,1520533663.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:43.394Z,1520533663.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:43.416Z,1520533663.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:43.794Z,1520533663.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:43.818Z,1520533663.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:44.204Z,1520533664.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:44.221Z,1520533664.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:44.580Z,1520533664.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:44.614Z,1520533664.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:44.997Z,1520533664.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:45.013Z,1520533665.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:45.401Z,1520533665.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:45.421Z,1520533665.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:45.798Z,1520533665.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:45.816Z,1520533665.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:46.195Z,1520533666.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:46.243Z,1520533666.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:46.596Z,1520533666.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:46.611Z,1520533666.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:46.989Z,1520533666.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:47.006Z,1520533667.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:47.395Z,1520533667.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:47.414Z,1520533667.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:47.801Z,1520533667.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:47.843Z,1520533667.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:48.201Z,1520533668.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:48.220Z,1520533668.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:48.600Z,1520533668.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:48.621Z,1520533668.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:48.999Z,1520533668.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:49.017Z,1520533669.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:49.396Z,1520533669.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:49.439Z,1520533669.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:49.790Z,1520533669.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:49.809Z,1520533669.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:50.205Z,1520533670.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:50.238Z,1520533670.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:50.577Z,1520533670.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:50.618Z,1520533670.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:51.004Z,1520533671.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:51.019Z,1520533671.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:51.405Z,1520533671.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:51.428Z,1520533671.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:51.806Z,1520533671.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:51.824Z,1520533671.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:52.189Z,1520533672.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:52.214Z,1520533672.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:52.596Z,1520533672.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:52.649Z,1520533672.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:52.990Z,1520533672.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:53.010Z,1520533673.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:53.389Z,1520533673.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:53.425Z,1520533673.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:53.812Z,1520533673.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:53.828Z,1520533673.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:54.209Z,1520533674.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:54.245Z,1520533674.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:54.602Z,1520533674.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:54.622Z,1520533674.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:54.983Z,1520533674.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:55.025Z,1520533675.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:55.387Z,1520533675.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:55.419Z,1520533675.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:55.783Z,1520533675.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:55.830Z,1520533675.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:56.185Z,1520533676.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:56.233Z,1520533676.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:56.587Z,1520533676.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:56.619Z,1520533676.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:57.002Z,1520533677.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:57.025Z,1520533677.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:57.406Z,1520533677.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:57.439Z,1520533677.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:57.805Z,1520533677.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:57.826Z,1520533677.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:58.187Z,1520533678.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:58.219Z,1520533678.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:58.583Z,1520533678.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:58.615Z,1520533678.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:58.987Z,1520533678.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:59.019Z,1520533679.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:59.382Z,1520533679.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:59.424Z,1520533679.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:27:59.806Z,1520533679.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:27:59.831Z,1520533679.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:00.214Z,1520533680.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:00.229Z,1520533680.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:00.593Z,1520533680.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:00.637Z,1520533680.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:00.988Z,1520533680.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:01.033Z,1520533681.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:01.383Z,1520533681.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:01.423Z,1520533681.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:01.787Z,1520533681.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:01.830Z,1520533681.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:02.191Z,1520533682.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:02.226Z,1520533682.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:02.585Z,1520533682.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:02.625Z,1520533682.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:03.002Z,1520533683.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:03.022Z,1520533683.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:03.405Z,1520533683.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:03.421Z,1520533683.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:03.802Z,1520533683.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:03.846Z,1520533683.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:04.192Z,1520533684.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:04.208Z,1520533684.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:04.593Z,1520533684.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:04.614Z,1520533684.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:04.999Z,1520533684.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:05.018Z,1520533685.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:05.396Z,1520533685.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:05.441Z,1520533685.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:05.805Z,1520533685.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:05.841Z,1520533685.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:06.202Z,1520533686.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:06.221Z,1520533686.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:06.612Z,1520533686.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:06.650Z,1520533686.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:06.992Z,1520533686.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:07.023Z,1520533687.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:07.387Z,1520533687.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:07.403Z,1520533687.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:07.796Z,1520533687.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:07.817Z,1520533687.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:08.251Z,1520533688.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:08.312Z,1520533688.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:08.591Z,1520533688.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:08.622Z,1520533688.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:08.997Z,1520533688.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:09.028Z,1520533689.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:09.410Z,1520533689.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:09.431Z,1520533689.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:09.812Z,1520533689.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:09.828Z,1520533689.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:10.195Z,1520533690.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:10.239Z,1520533690.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:10.590Z,1520533690.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:10.627Z,1520533690.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:10.984Z,1520533690.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:10.999Z,1520533690.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:11.386Z,1520533691.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:11.427Z,1520533691.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:11.805Z,1520533691.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:11.838Z,1520533691.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:12.197Z,1520533692.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:12.233Z,1520533692.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:12.606Z,1520533692.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:12.632Z,1520533692.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:12.985Z,1520533692.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:13.011Z,1520533693.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:13.388Z,1520533693.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:13.403Z,1520533693.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:13.790Z,1520533693.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:13.811Z,1520533693.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:14.193Z,1520533694.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:14.214Z,1520533694.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:14.587Z,1520533694.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:14.620Z,1520533694.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:15.001Z,1520533695.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:15.016Z,1520533695.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:15.401Z,1520533695.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:15.419Z,1520533695.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:15.800Z,1520533695.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:15.821Z,1520533695.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:16.196Z,1520533696.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:16.215Z,1520533696.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:16.596Z,1520533696.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:16.623Z,1520533696.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:16.996Z,1520533696.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:17.011Z,1520533697.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:17.395Z,1520533697.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:17.415Z,1520533697.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:17.804Z,1520533697.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:17.819Z,1520533697.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:18.201Z,1520533698.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:18.243Z,1520533698.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:18.600Z,1520533698.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:18.618Z,1520533698.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:18.996Z,1520533698.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:19.017Z,1520533699.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:19.398Z,1520533699.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:19.416Z,1520533699.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:19.791Z,1520533699.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:19.844Z,1520533699.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:20.198Z,1520533700.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:20.213Z,1520533700.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:20.595Z,1520533700.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:20.615Z,1520533700.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:21.003Z,1520533701.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:21.019Z,1520533701.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:21.401Z,1520533701.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:21.447Z,1520533701.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:21.801Z,1520533701.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:21.819Z,1520533701.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:22.196Z,1520533702.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:22.219Z,1520533702.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:22.597Z,1520533702.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:22.615Z,1520533702.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:22.996Z,1520533702.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:23.043Z,1520533703.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:23.391Z,1520533703.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:23.406Z,1520533703.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:23.801Z,1520533703.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:23.821Z,1520533703.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:24.205Z,1520533704.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:24.220Z,1520533704.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:24.601Z,1520533704.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:24.643Z,1520533704.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:24.996Z,1520533704.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:25.011Z,1520533705.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:25.393Z,1520533705.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:25.413Z,1520533705.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:25.791Z,1520533705.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:25.811Z,1520533705.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:26.183Z,1520533706.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:26.220Z,1520533706.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:26.588Z,1520533706.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:26.604Z,1520533706.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:27.001Z,1520533707.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:27.021Z,1520533707.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:27.404Z,1520533707.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:27.419Z,1520533707.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:27.800Z,1520533707.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:27.843Z,1520533707.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:28.195Z,1520533708.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:28.216Z,1520533708.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:28.596Z,1520533708.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:28.617Z,1520533708.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:28.997Z,1520533708.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:29.015Z,1520533709.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:29.395Z,1520533709.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:29.444Z,1520533709.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:29.801Z,1520533709.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:29.821Z,1520533709.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:30.201Z,1520533710.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:30.221Z,1520533710.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:30.603Z,1520533710.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:30.619Z,1520533710.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:31.002Z,1520533711.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:31.045Z,1520533711.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:31.392Z,1520533711.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:31.408Z,1520533711.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:31.795Z,1520533711.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:31.819Z,1520533711.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:32.199Z,1520533712.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:32.216Z,1520533712.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:32.595Z,1520533712.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:32.644Z,1520533712.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:33.001Z,1520533713.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:33.021Z,1520533713.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:33.401Z,1520533713.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:33.421Z,1520533713.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:33.804Z,1520533713.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:33.819Z,1520533713.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:34.195Z,1520533714.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:34.243Z,1520533714.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:34.597Z,1520533714.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:34.612Z,1520533714.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:37.714Z,1520533717.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:37.749Z,1520533717.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:37.848Z,1520533717.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:37.863Z,1520533717.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:38.216Z,1520533718.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:38.250Z,1520533718.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:38.605Z,1520533718.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:38.621Z,1520533718.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:39.017Z,1520533719.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:39.045Z,1520533719.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:39.398Z,1520533719.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:39.427Z,1520533719.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:39.801Z,1520533719.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:39.822Z,1520533719.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:40.209Z,1520533720.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:40.224Z,1520533720.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:40.605Z,1520533720.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:40.647Z,1520533720.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:41.006Z,1520533721.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:41.027Z,1520533721.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:41.421Z,1520533721.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:41.499Z,1520533721.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:41.819Z,1520533721.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:41.857Z,1520533721.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:42.202Z,1520533722.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:42.246Z,1520533722.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:42.604Z,1520533722.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:42.626Z,1520533722.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:43.005Z,1520533723.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:43.025Z,1520533723.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:43.406Z,1520533723.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:43.507Z,1520533723.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:43.817Z,1520533723.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:43.855Z,1520533723.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:44.220Z,1520533724.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:44.249Z,1520533724.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:44.608Z,1520533724.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:44.626Z,1520533724.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:45.006Z,1520533725.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:45.021Z,1520533725.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:45.410Z,1520533725.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:45.452Z,1520533725.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:45.798Z,1520533725.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:45.814Z,1520533725.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:46.270Z,1520533726.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:46.300Z,1520533726.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:46.604Z,1520533726.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:46.620Z,1520533726.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:47.005Z,1520533727.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:47.046Z,1520533727.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:47.409Z,1520533727.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:47.430Z,1520533727.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:47.812Z,1520533727.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:47.828Z,1520533727.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:48.206Z,1520533728.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:48.223Z,1520533728.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:48.606Z,1520533728.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:48.647Z,1520533728.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:49.003Z,1520533729.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:49.025Z,1520533729.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:49.409Z,1520533729.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:49.428Z,1520533729.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:49.812Z,1520533729.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:49.828Z,1520533729.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:50.213Z,1520533730.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:50.246Z,1520533730.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:50.609Z,1520533730.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:50.629Z,1520533730.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:51.009Z,1520533731.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:51.027Z,1520533731.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:51.409Z,1520533731.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:51.425Z,1520533731.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:51.808Z,1520533731.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:51.850Z,1520533731.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:52.207Z,1520533732.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:52.228Z,1520533732.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:52.611Z,1520533732.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:52.652Z,1520533732.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:53.011Z,1520533733.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:53.027Z,1520533733.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:53.409Z,1520533733.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:53.450Z,1520533733.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:53.803Z,1520533733.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:53.826Z,1520533733.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:54.205Z,1520533734.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:54.225Z,1520533734.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:54.608Z,1520533734.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:54.624Z,1520533734.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:55.009Z,1520533735.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:55.054Z,1520533735.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:55.413Z,1520533735.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:55.449Z,1520533735.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:55.811Z,1520533735.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:55.828Z,1520533735.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:56.212Z,1520533736.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:56.227Z,1520533736.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:56.597Z,1520533736.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:56.635Z,1520533736.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:57.007Z,1520533737.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:57.028Z,1520533737.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:57.408Z,1520533737.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:57.426Z,1520533737.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:57.811Z,1520533737.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:57.827Z,1520533737.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:58.213Z,1520533738.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:58.254Z,1520533738.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:58.609Z,1520533738.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:58.634Z,1520533738.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:58.998Z,1520533738.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:59.019Z,1520533739.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:59.409Z,1520533739.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:59.424Z,1520533739.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:28:59.807Z,1520533739.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:28:59.836Z,1520533739.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:00.201Z,1520533740.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:00.220Z,1520533740.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:00.611Z,1520533740.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:00.628Z,1520533740.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:01.016Z,1520533741.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:01.031Z,1520533741.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:01.409Z,1520533741.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:01.449Z,1520533741.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:01.801Z,1520533741.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:01.830Z,1520533741.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:02.215Z,1520533742.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:02.230Z,1520533742.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:02.618Z,1520533742.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:02.634Z,1520533742.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:03.020Z,1520533743.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:03.066Z,1520533743.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:03.411Z,1520533743.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:03.439Z,1520533743.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:03.793Z,1520533743.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:03.827Z,1520533743.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:04.209Z,1520533744.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:04.242Z,1520533744.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:04.592Z,1520533744.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:04.636Z,1520533744.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:05.010Z,1520533745.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:05.030Z,1520533745.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:05.422Z,1520533745.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:05.442Z,1520533745.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:05.823Z,1520533745.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:05.838Z,1520533745.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:06.208Z,1520533746.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:06.242Z,1520533746.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:06.607Z,1520533746.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:06.628Z,1520533746.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:06.995Z,1520533746.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:07.027Z,1520533747.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:07.412Z,1520533747.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:07.428Z,1520533747.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:07.817Z,1520533747.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:07.861Z,1520533747.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:08.223Z,1520533748.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:08.262Z,1520533748.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:08.614Z,1520533748.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:08.630Z,1520533748.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:08.996Z,1520533748.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:09.038Z,1520533749.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:09.407Z,1520533749.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:09.436Z,1520533749.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:09.789Z,1520533749.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:09.823Z,1520533749.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:10.200Z,1520533750.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:10.238Z,1520533750.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:10.611Z,1520533750.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:10.627Z,1520533750.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:11.014Z,1520533751.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:11.046Z,1520533751.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:11.424Z,1520533751.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:11.439Z,1520533751.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:11.822Z,1520533751.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:11.842Z,1520533751.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:12.212Z,1520533752.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:12.228Z,1520533752.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:12.595Z,1520533752.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:12.639Z,1520533752.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:12.999Z,1520533752.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:13.030Z,1520533753.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:13.393Z,1520533753.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:13.433Z,1520533753.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:13.820Z,1520533753.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:13.835Z,1520533753.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:14.217Z,1520533754.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:14.243Z,1520533754.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:14.615Z,1520533754.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:14.654Z,1520533754.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:14.996Z,1520533754.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:15.034Z,1520533755.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:15.397Z,1520533755.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:15.427Z,1520533755.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:15.789Z,1520533755.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:15.836Z,1520533755.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:16.196Z,1520533756.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:16.231Z,1520533756.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:16.598Z,1520533756.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:16.632Z,1520533756.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:17.007Z,1520533757.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:17.042Z,1520533757.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:17.410Z,1520533757.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:17.454Z,1520533757.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:17.805Z,1520533757.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:17.834Z,1520533757.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:18.203Z,1520533758.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:18.234Z,1520533758.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:18.604Z,1520533758.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:18.632Z,1520533758.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:18.999Z,1520533758.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:19.040Z,1520533759.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:19.393Z,1520533759.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:19.408Z,1520533759.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:19.815Z,1520533759.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:19.840Z,1520533759.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:20.240Z,1520533760.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:20.255Z,1520533760.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:20.602Z,1520533760.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:20.646Z,1520533760.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:21.002Z,1520533761.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:21.044Z,1520533761.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:21.401Z,1520533761.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:21.442Z,1520533761.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:21.799Z,1520533761.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:21.818Z,1520533761.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:22.207Z,1520533762.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:22.254Z,1520533762.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:22.613Z,1520533762.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:22.644Z,1520533762.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:23.001Z,1520533763.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:23.050Z,1520533763.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:23.415Z,1520533763.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:23.446Z,1520533763.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:23.807Z,1520533763.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:23.846Z,1520533763.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:24.203Z,1520533764.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:24.245Z,1520533764.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:24.616Z,1520533764.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:24.650Z,1520533764.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:25.018Z,1520533765.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:25.048Z,1520533765.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:25.413Z,1520533765.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:25.451Z,1520533765.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:25.804Z,1520533765.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:25.825Z,1520533765.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:26.203Z,1520533766.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:26.223Z,1520533766.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:26.609Z,1520533766.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:26.624Z,1520533766.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:27.011Z,1520533767.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:27.047Z,1520533767.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:27.405Z,1520533767.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:27.448Z,1520533767.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:27.798Z,1520533767.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:27.819Z,1520533767.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:28.208Z,1520533768.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:28.223Z,1520533768.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:28.601Z,1520533768.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:28.632Z,1520533768.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:29.005Z,1520533769.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:29.027Z,1520533769.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:29.419Z,1520533769.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:29.451Z,1520533769.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:29.812Z,1520533769.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:29.827Z,1520533769.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:30.207Z,1520533770.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:30.252Z,1520533770.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:30.606Z,1520533770.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:30.626Z,1520533770.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:31.008Z,1520533771.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:31.026Z,1520533771.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:31.407Z,1520533771.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:31.423Z,1520533771.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:31.810Z,1520533771.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:31.849Z,1520533771.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:32.213Z,1520533772.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:32.232Z,1520533772.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:32.611Z,1520533772.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:32.628Z,1520533772.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:33.010Z,1520533773.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:33.025Z,1520533773.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:33.402Z,1520533773.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:33.451Z,1520533773.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:33.797Z,1520533773.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:33.813Z,1520533773.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:34.229Z,1520533774.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:34.252Z,1520533774.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:34.609Z,1520533774.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:34.624Z,1520533774.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:37.709Z,1520533777.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:37.725Z,1520533777.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:37.837Z,1520533777.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:37.870Z,1520533777.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:38.212Z,1520533778.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:38.253Z,1520533778.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:38.587Z,1520533778.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:38.616Z,1520533778.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:39.003Z,1520533779.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:39.023Z,1520533779.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:39.403Z,1520533779.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:39.426Z,1520533779.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:39.802Z,1520533779.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:39.837Z,1520533779.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:40.208Z,1520533780.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:40.229Z,1520533780.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:40.611Z,1520533780.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:40.631Z,1520533780.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:40.980Z,1520533780.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:41.014Z,1520533781.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:41.387Z,1520533781.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:41.414Z,1520533781.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:41.787Z,1520533781.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:41.824Z,1520533781.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:42.200Z,1520533782.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:42.220Z,1520533782.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:42.587Z,1520533782.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:42.617Z,1520533782.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:43.005Z,1520533783.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:43.039Z,1520533783.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:43.407Z,1520533783.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:43.427Z,1520533783.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:43.814Z,1520533783.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:43.834Z,1520533783.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:44.204Z,1520533784.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:44.220Z,1520533784.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:44.584Z,1520533784.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:44.629Z,1520533784.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:44.998Z,1520533784.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:45.013Z,1520533785.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:45.387Z,1520533785.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:45.430Z,1520533785.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:45.803Z,1520533785.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:45.829Z,1520533785.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:46.209Z,1520533786.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:46.242Z,1520533786.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:46.609Z,1520533786.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:46.629Z,1520533786.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:46.984Z,1520533786.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:47.024Z,1520533787.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:47.391Z,1520533787.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:47.421Z,1520533787.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:47.787Z,1520533787.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:47.822Z,1520533787.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:48.192Z,1520533788.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:48.226Z,1520533788.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:48.587Z,1520533788.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:48.624Z,1520533788.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:49.009Z,1520533789.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:49.032Z,1520533789.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:49.410Z,1520533789.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:49.442Z,1520533789.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:49.809Z,1520533789.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:49.829Z,1520533789.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:50.187Z,1520533790.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:50.229Z,1520533790.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:50.587Z,1520533790.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:50.621Z,1520533790.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:50.990Z,1520533790.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:51.029Z,1520533791.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:51.390Z,1520533791.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:51.433Z,1520533791.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:51.801Z,1520533791.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:51.838Z,1520533791.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:52.218Z,1520533792.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:52.233Z,1520533792.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:52.605Z,1520533792.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:52.647Z,1520533792.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:52.995Z,1520533792.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:53.027Z,1520533793.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:53.395Z,1520533793.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:53.434Z,1520533793.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:53.797Z,1520533793.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:53.831Z,1520533793.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:54.195Z,1520533794.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:54.243Z,1520533794.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:54.609Z,1520533794.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:54.636Z,1520533794.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:55.013Z,1520533795.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:55.047Z,1520533795.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:55.404Z,1520533795.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:55.428Z,1520533795.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:55.798Z,1520533795.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:55.839Z,1520533795.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:56.197Z,1520533796.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:56.212Z,1520533796.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:56.601Z,1520533796.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:56.621Z,1520533796.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:57.011Z,1520533797.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:57.043Z,1520533797.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:57.398Z,1520533797.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:57.441Z,1520533797.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:57.794Z,1520533797.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:57.814Z,1520533797.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:58.202Z,1520533798.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:58.222Z,1520533798.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:58.602Z,1520533798.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:58.619Z,1520533798.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:59.002Z,1520533799.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:59.046Z,1520533799.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:59.402Z,1520533799.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:59.421Z,1520533799.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:29:59.803Z,1520533799.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:29:59.823Z,1520533799.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:00.203Z,1520533800.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:00.219Z,1520533800.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:00.596Z,1520533800.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:00.645Z,1520533800.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:00.996Z,1520533800.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:01.011Z,1520533801.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:01.399Z,1520533801.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:01.420Z,1520533801.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:01.806Z,1520533801.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:01.822Z,1520533801.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:02.206Z,1520533802.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:02.242Z,1520533802.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:02.606Z,1520533802.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:02.626Z,1520533802.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:02.997Z,1520533802.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:03.019Z,1520533803.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:03.402Z,1520533803.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:03.419Z,1520533803.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:03.800Z,1520533803.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:03.845Z,1520533803.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:04.201Z,1520533804.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:04.220Z,1520533804.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:04.600Z,1520533804.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:04.620Z,1520533804.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:05.007Z,1520533805.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:05.023Z,1520533805.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:05.405Z,1520533805.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:05.446Z,1520533805.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:05.807Z,1520533805.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:05.828Z,1520533805.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:06.197Z,1520533806.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:06.217Z,1520533806.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:06.601Z,1520533806.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:06.626Z,1520533806.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:06.999Z,1520533806.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:07.030Z,1520533807.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:07.401Z,1520533807.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:07.418Z,1520533807.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:07.805Z,1520533807.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:07.824Z,1520533807.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:08.209Z,1520533808.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:08.224Z,1520533808.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:08.605Z,1520533808.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:08.646Z,1520533808.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:08.995Z,1520533808.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:09.010Z,1520533809.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:09.400Z,1520533809.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:09.420Z,1520533809.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:09.802Z,1520533809.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:09.819Z,1520533809.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:10.201Z,1520533810.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:10.246Z,1520533810.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:10.595Z,1520533810.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:10.610Z,1520533810.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:11.006Z,1520533811.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:11.025Z,1520533811.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:11.409Z,1520533811.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:11.424Z,1520533811.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:11.804Z,1520533811.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:11.849Z,1520533811.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:12.200Z,1520533812.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:12.218Z,1520533812.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:12.599Z,1520533812.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:12.619Z,1520533812.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:13.002Z,1520533813.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:13.018Z,1520533813.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:13.400Z,1520533813.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:13.445Z,1520533813.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:13.805Z,1520533813.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:13.825Z,1520533813.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:14.209Z,1520533814.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:14.227Z,1520533814.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:14.607Z,1520533814.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:14.633Z,1520533814.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:14.995Z,1520533814.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:15.035Z,1520533815.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:15.394Z,1520533815.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:15.437Z,1520533815.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:15.788Z,1520533815.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:15.804Z,1520533815.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:16.192Z,1520533816.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:16.229Z,1520533816.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:16.594Z,1520533816.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:16.609Z,1520533816.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:17.008Z,1520533817.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:17.041Z,1520533817.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:17.406Z,1520533817.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:17.437Z,1520533817.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:17.804Z,1520533817.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:17.819Z,1520533817.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:18.194Z,1520533818.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:18.238Z,1520533818.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:18.594Z,1520533818.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:18.617Z,1520533818.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:18.999Z,1520533818.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:19.019Z,1520533819.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:19.399Z,1520533819.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:19.417Z,1520533819.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:19.801Z,1520533819.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:19.846Z,1520533819.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:20.205Z,1520533820.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:20.244Z,1520533820.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:20.601Z,1520533820.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:20.621Z,1520533820.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:20.000Z,1520533821.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:21.018Z,1520533821.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:21.398Z,1520533821.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:21.423Z,1520533821.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:21.798Z,1520533821.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:21.813Z,1520533821.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:22.199Z,1520533822.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:22.219Z,1520533822.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:22.599Z,1520533822.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:22.617Z,1520533822.617 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:22.617Z,1520533822.617 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 215
2018-03-08T18:30:22.617Z,1520533822.617 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T18:30:22.619Z,1520533822.619 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:22.619Z,1520533822.619 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 215
2018-03-08T18:30:22.619Z,1520533822.619 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T18:30:22.621Z,1520533822.621 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:22.621Z,1520533822.621 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 215
2018-03-08T18:30:22.621Z,1520533822.621 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T18:30:22.670Z,1520533822.670 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T18:30:22.670Z,1520533822.670 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T18:30:22.670Z,1520533822.670 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T18:30:23.005Z,1520533823.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:23.056Z,1520533823.056 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T18:30:23.056Z,1520533823.056 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 215
2018-03-08T18:30:23.057Z,1520533823.057 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T18:30:23.057Z,1520533823.057 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 215
2018-03-08T18:30:23.057Z,1520533823.057 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T18:30:23.057Z,1520533823.057 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 215
2018-03-08T18:30:23.404Z,1520533823.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:23.427Z,1520533823.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T18:30:23.428Z,1520533823.428 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:30:23.428Z,1520533823.428 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:30:23.429Z,1520533823.429 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T18:30:23.429Z,1520533823.429 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:30:23.429Z,1520533823.429 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:30:23.430Z,1520533823.430 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T18:30:23.430Z,1520533823.430 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:30:23.431Z,1520533823.431 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:30:23.806Z,1520533823.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:23.824Z,1520533823.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T18:30:23.825Z,1520533823.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:24.203Z,1520533824.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:24.219Z,1520533824.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T18:30:24.220Z,1520533824.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:24.595Z,1520533824.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:24.634Z,1520533824.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T18:30:24.635Z,1520533824.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:24.999Z,1520533824.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:25.013Z,1520533825.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T18:30:25.015Z,1520533825.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:25.399Z,1520533825.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:25.419Z,1520533825.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T18:30:25.420Z,1520533825.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:25.812Z,1520533825.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:25.827Z,1520533825.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T18:30:25.828Z,1520533825.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:26.209Z,1520533826.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:26.252Z,1520533826.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T18:30:26.253Z,1520533826.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:26.606Z,1520533826.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:26.630Z,1520533826.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T18:30:26.631Z,1520533826.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:26.999Z,1520533826.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:27.018Z,1520533827.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T18:30:27.019Z,1520533827.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:27.396Z,1520533827.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:27.415Z,1520533827.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T18:30:27.416Z,1520533827.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:27.793Z,1520533827.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:27.836Z,1520533827.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T18:30:27.850Z,1520533827.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:28.200Z,1520533828.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:28.216Z,1520533828.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T18:30:28.218Z,1520533828.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:28.596Z,1520533828.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:28.616Z,1520533828.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T18:30:28.617Z,1520533828.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:29.011Z,1520533829.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:29.026Z,1520533829.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T18:30:29.027Z,1520533829.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:29.408Z,1520533829.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:29.448Z,1520533829.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T18:30:29.449Z,1520533829.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:29.805Z,1520533829.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:29.826Z,1520533829.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T18:30:29.827Z,1520533829.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:30.200Z,1520533830.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:30.220Z,1520533830.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T18:30:30.221Z,1520533830.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:30.596Z,1520533830.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:30.616Z,1520533830.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T18:30:30.617Z,1520533830.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:30.995Z,1520533830.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:31.028Z,1520533831.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T18:30:31.030Z,1520533831.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:31.397Z,1520533831.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:31.412Z,1520533831.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T18:30:31.413Z,1520533831.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:31.811Z,1520533831.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:31.827Z,1520533831.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T18:30:31.828Z,1520533831.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:32.211Z,1520533832.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:32.234Z,1520533832.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T18:30:32.235Z,1520533832.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:32.614Z,1520533832.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:32.650Z,1520533832.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T18:30:32.651Z,1520533832.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:32.999Z,1520533832.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:33.030Z,1520533833.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T18:30:33.031Z,1520533833.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:33.401Z,1520533833.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:33.420Z,1520533833.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T18:30:33.421Z,1520533833.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:33.781Z,1520533833.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:33.815Z,1520533833.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T18:30:33.816Z,1520533833.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:33.819Z,1520533833.819 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T18:30:33.819Z,1520533833.819 [Default:CheckIn:C.Wait] Stopped
2018-03-08T18:30:33.819Z,1520533833.819 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T18:30:33.819Z,1520533833.819 [Default:CheckIn:D] Running Loop=1
2018-03-08T18:30:34.197Z,1520533834.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:34.215Z,1520533834.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T18:30:34.216Z,1520533834.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:34.219Z,1520533834.219 [Default:CheckIn:D] Stopped
2018-03-08T18:30:34.219Z,1520533834.219 [Default:CheckIn:E] Running Loop=1
2018-03-08T18:30:34.600Z,1520533834.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:34.615Z,1520533834.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T18:30:34.617Z,1520533834.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:34.624Z,1520533834.624 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 644.823568 min 
2018-03-08T18:30:34.625Z,1520533834.625 [Default:CheckIn:E] Stopped
2018-03-08T18:30:34.625Z,1520533834.625 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T18:30:34.625Z,1520533834.625 [Default:CheckIn] Stopped
2018-03-08T18:30:34.625Z,1520533834.625 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T18:30:34.625Z,1520533834.625 [Default:CheckIn](INFO): Running loop #63
2018-03-08T18:30:34.625Z,1520533834.625 [Default:CheckIn] Running Loop=63
2018-03-08T18:30:34.626Z,1520533834.626 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T18:30:34.626Z,1520533834.626 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T18:30:35.004Z,1520533835.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:35.030Z,1520533835.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T18:30:35.031Z,1520533835.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:38.109Z,1520533838.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:38.125Z,1520533838.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-03-08T18:30:38.126Z,1520533838.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:38.231Z,1520533838.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:38.265Z,1520533838.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T18:30:38.266Z,1520533838.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:38.606Z,1520533838.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:38.629Z,1520533838.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T18:30:38.630Z,1520533838.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:39.012Z,1520533839.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:39.046Z,1520533839.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T18:30:39.047Z,1520533839.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:39.411Z,1520533839.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:39.432Z,1520533839.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T18:30:39.434Z,1520533839.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:39.821Z,1520533839.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:39.850Z,1520533839.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T18:30:39.851Z,1520533839.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:40.224Z,1520533840.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:40.240Z,1520533840.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T18:30:40.241Z,1520533840.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:40.614Z,1520533840.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:40.650Z,1520533840.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T18:30:40.651Z,1520533840.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:40.000Z,1520533841.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:41.031Z,1520533841.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T18:30:41.032Z,1520533841.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:41.395Z,1520533841.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:41.442Z,1520533841.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T18:30:41.442Z,1520533841.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:41.800Z,1520533841.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:41.830Z,1520533841.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T18:30:41.830Z,1520533841.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:42.199Z,1520533842.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:42.230Z,1520533842.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T18:30:42.231Z,1520533842.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:42.605Z,1520533842.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:42.647Z,1520533842.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:43.006Z,1520533843.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:43.039Z,1520533843.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:43.411Z,1520533843.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:43.446Z,1520533843.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:43.795Z,1520533843.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:43.842Z,1520533843.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:44.195Z,1520533844.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:44.211Z,1520533844.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:44.598Z,1520533844.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:44.642Z,1520533844.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:45.007Z,1520533845.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:45.039Z,1520533845.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:45.409Z,1520533845.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:45.447Z,1520533845.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:45.818Z,1520533845.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:45.851Z,1520533845.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:46.203Z,1520533846.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:46.242Z,1520533846.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:46.605Z,1520533846.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:46.642Z,1520533846.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:46.995Z,1520533846.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:47.019Z,1520533847.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:47.402Z,1520533847.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:47.442Z,1520533847.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:47.810Z,1520533847.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:47.828Z,1520533847.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:48.217Z,1520533848.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:48.251Z,1520533848.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:48.605Z,1520533848.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:48.647Z,1520533848.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:49.003Z,1520533849.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:49.025Z,1520533849.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:49.403Z,1520533849.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:49.423Z,1520533849.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:49.806Z,1520533849.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:49.826Z,1520533849.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:50.206Z,1520533850.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:50.247Z,1520533850.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:50.603Z,1520533850.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:50.623Z,1520533850.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:51.006Z,1520533851.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:51.026Z,1520533851.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:51.418Z,1520533851.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:51.454Z,1520533851.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:51.818Z,1520533851.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:51.850Z,1520533851.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:52.204Z,1520533852.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:52.247Z,1520533852.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:52.603Z,1520533852.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:52.623Z,1520533852.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:53.007Z,1520533853.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:53.022Z,1520533853.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:53.402Z,1520533853.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:53.450Z,1520533853.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:53.817Z,1520533853.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:53.852Z,1520533853.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:54.211Z,1520533854.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:54.228Z,1520533854.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:54.618Z,1520533854.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:54.650Z,1520533854.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:55.003Z,1520533855.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:55.048Z,1520533855.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:55.404Z,1520533855.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:55.424Z,1520533855.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:55.813Z,1520533855.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:55.832Z,1520533855.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:56.201Z,1520533856.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:56.218Z,1520533856.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:56.610Z,1520533856.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:56.649Z,1520533856.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:57.013Z,1520533857.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:57.033Z,1520533857.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:57.411Z,1520533857.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:57.428Z,1520533857.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:57.805Z,1520533857.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:57.830Z,1520533857.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:58.207Z,1520533858.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:58.249Z,1520533858.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:58.606Z,1520533858.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:58.627Z,1520533858.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:59.011Z,1520533859.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:59.028Z,1520533859.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:59.415Z,1520533859.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:59.434Z,1520533859.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:30:59.812Z,1520533859.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:30:59.853Z,1520533859.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:00.201Z,1520533860.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:00.227Z,1520533860.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:00.608Z,1520533860.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:00.630Z,1520533860.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:01.010Z,1520533861.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:01.025Z,1520533861.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:01.409Z,1520533861.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:01.438Z,1520533861.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:01.812Z,1520533861.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:01.832Z,1520533861.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:02.216Z,1520533862.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:02.231Z,1520533862.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:02.616Z,1520533862.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:02.638Z,1520533862.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:03.004Z,1520533863.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:03.040Z,1520533863.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:03.406Z,1520533863.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:03.428Z,1520533863.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:03.804Z,1520533863.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:03.823Z,1520533863.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:04.213Z,1520533864.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:04.228Z,1520533864.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:04.606Z,1520533864.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:04.640Z,1520533864.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:05.013Z,1520533865.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:05.032Z,1520533865.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:05.416Z,1520533865.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:05.431Z,1520533865.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:05.816Z,1520533865.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:05.831Z,1520533865.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:06.209Z,1520533866.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:06.238Z,1520533866.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:06.604Z,1520533866.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:06.625Z,1520533866.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:07.010Z,1520533867.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:07.028Z,1520533867.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:07.411Z,1520533867.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:07.426Z,1520533867.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:07.812Z,1520533867.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:07.854Z,1520533867.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:08.213Z,1520533868.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:08.233Z,1520533868.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:08.616Z,1520533868.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:08.630Z,1520533868.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:09.011Z,1520533869.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:09.030Z,1520533869.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:09.406Z,1520533869.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:09.440Z,1520533869.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:09.808Z,1520533869.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:09.828Z,1520533869.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:10.209Z,1520533870.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:10.227Z,1520533870.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:10.615Z,1520533870.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:10.630Z,1520533870.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:11.015Z,1520533871.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:11.055Z,1520533871.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:11.413Z,1520533871.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:11.433Z,1520533871.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:11.810Z,1520533871.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:11.828Z,1520533871.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:12.212Z,1520533872.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:12.239Z,1520533872.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:12.618Z,1520533872.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:12.651Z,1520533872.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:13.025Z,1520533873.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:13.067Z,1520533873.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:13.427Z,1520533873.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:13.442Z,1520533873.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:13.794Z,1520533873.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:13.835Z,1520533873.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:14.196Z,1520533874.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:14.238Z,1520533874.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:14.596Z,1520533874.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:14.635Z,1520533874.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:15.006Z,1520533875.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:15.041Z,1520533875.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:15.415Z,1520533875.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:15.441Z,1520533875.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:15.833Z,1520533875.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:15.854Z,1520533875.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:16.197Z,1520533876.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:16.250Z,1520533876.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:16.598Z,1520533876.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:16.635Z,1520533876.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:16.998Z,1520533876.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:17.017Z,1520533877.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:17.403Z,1520533877.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:17.451Z,1520533877.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:17.814Z,1520533877.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:17.844Z,1520533877.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:18.236Z,1520533878.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:18.251Z,1520533878.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:18.604Z,1520533878.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:18.620Z,1520533878.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:19.004Z,1520533879.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:19.054Z,1520533879.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:19.404Z,1520533879.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:19.443Z,1520533879.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:19.798Z,1520533879.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:19.818Z,1520533879.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:20.207Z,1520533880.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:20.223Z,1520533880.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:20.604Z,1520533880.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:20.647Z,1520533880.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:21.001Z,1520533881.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:21.020Z,1520533881.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:21.388Z,1520533881.388 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T18:31:21.388Z,1520533881.388 [NAL9602] Data Fault, FailCount= 5
2018-03-08T18:31:21.388Z,1520533881.388 [NAL9602](ERROR): Data Fault
2018-03-08T18:31:21.405Z,1520533881.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:21.425Z,1520533881.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:21.463Z,1520533881.463 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T18:31:21.463Z,1520533881.463 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-08T18:31:21.778Z,1520533881.778 [NAL9602](INFO): Powering down
2018-03-08T18:31:21.810Z,1520533881.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:21.836Z,1520533881.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:21.854Z,1520533881.854 [CBIT](INFO): Critical error at 20180308T183121
2018-03-08T18:31:22.194Z,1520533882.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:22.237Z,1520533882.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:22.607Z,1520533882.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:22.629Z,1520533882.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:22.994Z,1520533882.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:23.024Z,1520533883.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:23.394Z,1520533883.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:23.431Z,1520533883.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:23.805Z,1520533883.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:23.840Z,1520533883.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:24.205Z,1520533884.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:24.229Z,1520533884.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:24.587Z,1520533884.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:24.626Z,1520533884.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:25.010Z,1520533885.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:25.026Z,1520533885.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:25.394Z,1520533885.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:25.437Z,1520533885.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:25.787Z,1520533885.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:25.823Z,1520533885.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:26.207Z,1520533886.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:26.226Z,1520533886.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:26.594Z,1520533886.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:26.625Z,1520533886.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:26.991Z,1520533886.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:27.030Z,1520533887.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:27.407Z,1520533887.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:27.427Z,1520533887.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:27.794Z,1520533887.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:27.824Z,1520533887.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:28.211Z,1520533888.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:28.226Z,1520533888.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:28.605Z,1520533888.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:28.640Z,1520533888.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:29.005Z,1520533889.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:29.029Z,1520533889.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:29.406Z,1520533889.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:29.426Z,1520533889.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:29.810Z,1520533889.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:29.826Z,1520533889.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:30.206Z,1520533890.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:30.237Z,1520533890.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:30.587Z,1520533890.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:30.615Z,1520533890.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:30.998Z,1520533890.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:31.029Z,1520533891.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:31.394Z,1520533891.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:31.431Z,1520533891.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:31.787Z,1520533891.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:31.818Z,1520533891.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:32.199Z,1520533892.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:32.230Z,1520533892.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:32.594Z,1520533892.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:32.624Z,1520533892.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:32.991Z,1520533892.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:33.029Z,1520533893.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:33.398Z,1520533893.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:33.443Z,1520533893.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:33.798Z,1520533893.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:33.831Z,1520533893.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:34.199Z,1520533894.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:34.231Z,1520533894.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:34.600Z,1520533894.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:34.628Z,1520533894.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:34.994Z,1520533894.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:35.040Z,1520533895.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:38.113Z,1520533898.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:38.129Z,1520533898.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:38.236Z,1520533898.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:38.251Z,1520533898.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:38.582Z,1520533898.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:38.628Z,1520533898.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:38.979Z,1520533898.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:38.995Z,1520533898.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:39.386Z,1520533899.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:39.422Z,1520533899.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:39.786Z,1520533899.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:39.807Z,1520533899.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:40.179Z,1520533900.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:40.194Z,1520533900.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:40.583Z,1520533900.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:40.603Z,1520533900.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:40.983Z,1520533900.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:41.002Z,1520533901.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:41.383Z,1520533901.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:41.398Z,1520533901.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:41.788Z,1520533901.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:41.803Z,1520533901.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:42.187Z,1520533902.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:42.216Z,1520533902.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:42.580Z,1520533902.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:42.595Z,1520533902.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:42.988Z,1520533902.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:43.003Z,1520533903.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:43.384Z,1520533903.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:43.404Z,1520533903.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:43.779Z,1520533903.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:43.795Z,1520533903.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:44.190Z,1520533904.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:44.211Z,1520533904.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:44.583Z,1520533904.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:44.610Z,1520533904.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:44.975Z,1520533904.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:45.002Z,1520533905.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:45.389Z,1520533905.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:45.413Z,1520533905.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:45.790Z,1520533905.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:45.811Z,1520533905.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:46.174Z,1520533906.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:46.201Z,1520533906.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:46.591Z,1520533906.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:46.607Z,1520533906.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:46.991Z,1520533906.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:47.008Z,1520533907.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:47.374Z,1520533907.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:47.406Z,1520533907.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:47.789Z,1520533907.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:47.810Z,1520533907.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:48.178Z,1520533908.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:48.214Z,1520533908.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:48.591Z,1520533908.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:48.609Z,1520533908.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:48.989Z,1520533908.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:49.010Z,1520533909.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:49.378Z,1520533909.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:49.415Z,1520533909.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:49.774Z,1520533909.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:49.808Z,1520533909.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:50.192Z,1520533910.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:50.218Z,1520533910.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:50.589Z,1520533910.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:50.611Z,1520533910.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:50.978Z,1520533910.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:51.012Z,1520533911.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:51.392Z,1520533911.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:51.407Z,1520533911.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:51.794Z,1520533911.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:51.815Z,1520533911.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:52.179Z,1520533912.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:52.212Z,1520533912.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:52.576Z,1520533912.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:52.604Z,1520533912.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:52.983Z,1520533912.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:53.010Z,1520533913.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:53.375Z,1520533913.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:53.418Z,1520533913.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:53.775Z,1520533913.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:53.811Z,1520533913.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:54.183Z,1520533914.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:54.210Z,1520533914.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:54.587Z,1520533914.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:54.615Z,1520533914.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:54.976Z,1520533914.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:55.004Z,1520533915.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:55.379Z,1520533915.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:55.407Z,1520533915.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:55.779Z,1520533915.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:55.793Z,1520533915.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:56.182Z,1520533916.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:56.197Z,1520533916.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:56.583Z,1520533916.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:56.598Z,1520533916.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:56.987Z,1520533916.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:57.007Z,1520533917.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:57.379Z,1520533917.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:57.395Z,1520533917.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:57.429Z,1520533917.429 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T18:31:57.784Z,1520533917.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:57.807Z,1520533917.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:58.188Z,1520533918.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:58.204Z,1520533918.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:58.577Z,1520533918.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:58.601Z,1520533918.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:58.988Z,1520533918.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:59.004Z,1520533919.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:59.382Z,1520533919.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:59.397Z,1520533919.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:31:59.777Z,1520533919.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:31:59.797Z,1520533919.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:00.188Z,1520533920.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:00.209Z,1520533920.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:00.578Z,1520533920.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:00.612Z,1520533920.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:00.975Z,1520533920.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:01.011Z,1520533921.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:01.382Z,1520533921.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:01.413Z,1520533921.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:01.782Z,1520533921.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:01.813Z,1520533921.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:02.182Z,1520533922.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:02.228Z,1520533922.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:02.580Z,1520533922.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:02.606Z,1520533922.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:02.975Z,1520533922.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:03.009Z,1520533923.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:03.382Z,1520533923.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:03.413Z,1520533923.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:03.778Z,1520533923.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:03.805Z,1520533923.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:04.174Z,1520533924.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:04.206Z,1520533924.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:04.571Z,1520533924.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:04.587Z,1520533924.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:04.979Z,1520533924.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:05.023Z,1520533925.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:05.382Z,1520533925.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:05.421Z,1520533925.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:05.771Z,1520533925.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:05.787Z,1520533925.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:06.178Z,1520533926.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:06.198Z,1520533926.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:06.586Z,1520533926.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:06.628Z,1520533926.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:06.975Z,1520533926.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:06.991Z,1520533926.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:07.382Z,1520533927.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:07.402Z,1520533927.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:07.785Z,1520533927.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:07.800Z,1520533927.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:08.187Z,1520533928.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:08.208Z,1520533928.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:08.584Z,1520533928.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:08.600Z,1520533928.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:08.987Z,1520533928.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:09.002Z,1520533929.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:09.383Z,1520533929.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:09.399Z,1520533929.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:09.784Z,1520533929.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:09.804Z,1520533929.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:10.182Z,1520533930.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:10.196Z,1520533930.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:10.581Z,1520533930.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:10.597Z,1520533930.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:10.987Z,1520533930.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:11.003Z,1520533931.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:11.380Z,1520533931.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:11.410Z,1520533931.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:11.783Z,1520533931.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:11.799Z,1520533931.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:12.182Z,1520533932.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:12.211Z,1520533932.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:12.590Z,1520533932.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:12.605Z,1520533932.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:12.979Z,1520533932.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:12.995Z,1520533932.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:13.386Z,1520533933.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:13.401Z,1520533933.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:13.780Z,1520533933.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:13.806Z,1520533933.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:14.183Z,1520533934.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:14.199Z,1520533934.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:14.591Z,1520533934.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:14.611Z,1520533934.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:14.982Z,1520533934.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:14.997Z,1520533934.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:15.382Z,1520533935.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:15.398Z,1520533935.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:15.786Z,1520533935.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:15.801Z,1520533935.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:16.186Z,1520533936.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:16.210Z,1520533936.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:16.579Z,1520533936.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:16.599Z,1520533936.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:16.984Z,1520533936.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:17.007Z,1520533937.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:17.387Z,1520533937.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:17.402Z,1520533937.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:17.778Z,1520533937.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:17.800Z,1520533937.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:18.185Z,1520533938.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:18.206Z,1520533938.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:18.582Z,1520533938.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:18.597Z,1520533938.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:18.983Z,1520533938.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:18.999Z,1520533938.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:19.390Z,1520533939.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:19.410Z,1520533939.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:19.789Z,1520533939.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:19.804Z,1520533939.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:20.184Z,1520533940.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:20.199Z,1520533940.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:20.586Z,1520533940.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:20.601Z,1520533940.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:20.982Z,1520533940.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:20.999Z,1520533940.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:21.384Z,1520533941.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:21.399Z,1520533941.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:21.786Z,1520533941.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:21.801Z,1520533941.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:22.182Z,1520533942.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:22.202Z,1520533942.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:22.579Z,1520533942.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:22.601Z,1520533942.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:22.990Z,1520533942.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:23.005Z,1520533943.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:23.381Z,1520533943.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:23.399Z,1520533943.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:23.783Z,1520533943.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:23.798Z,1520533943.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:24.190Z,1520533944.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:24.211Z,1520533944.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:24.589Z,1520533944.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:24.604Z,1520533944.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:24.983Z,1520533944.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:24.999Z,1520533944.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:25.390Z,1520533945.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:25.405Z,1520533945.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:25.789Z,1520533945.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:25.809Z,1520533945.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:26.185Z,1520533946.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:26.201Z,1520533946.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:26.586Z,1520533946.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:26.601Z,1520533946.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:26.986Z,1520533946.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:27.001Z,1520533947.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:27.382Z,1520533947.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:27.399Z,1520533947.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:27.784Z,1520533947.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:27.807Z,1520533947.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:28.183Z,1520533948.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:28.199Z,1520533948.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:28.585Z,1520533948.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:28.600Z,1520533948.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:28.991Z,1520533948.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:29.011Z,1520533949.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:29.381Z,1520533949.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:29.408Z,1520533949.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:29.785Z,1520533949.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:29.801Z,1520533949.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:30.182Z,1520533950.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:30.221Z,1520533950.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:30.582Z,1520533950.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:30.613Z,1520533950.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:30.973Z,1520533950.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:30.997Z,1520533950.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:31.385Z,1520533951.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:31.412Z,1520533951.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:31.778Z,1520533951.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:31.816Z,1520533951.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:32.183Z,1520533952.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:32.215Z,1520533952.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:32.583Z,1520533952.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:32.628Z,1520533952.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:32.979Z,1520533952.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:33.012Z,1520533953.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:33.383Z,1520533953.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:33.416Z,1520533953.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:33.783Z,1520533953.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:33.815Z,1520533953.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:34.174Z,1520533954.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:34.211Z,1520533954.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:34.572Z,1520533954.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:34.588Z,1520533954.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:34.977Z,1520533954.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:35.025Z,1520533955.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:35.381Z,1520533955.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:35.427Z,1520533955.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:38.491Z,1520533958.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:38.514Z,1520533958.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:38.620Z,1520533958.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:38.644Z,1520533958.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:38.975Z,1520533958.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:39.014Z,1520533959.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:39.369Z,1520533959.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:39.384Z,1520533959.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:39.771Z,1520533959.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:39.787Z,1520533959.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:40.175Z,1520533960.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:40.219Z,1520533960.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:40.572Z,1520533960.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:40.587Z,1520533960.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:40.968Z,1520533960.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:40.983Z,1520533960.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:41.372Z,1520533961.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:41.387Z,1520533961.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:41.771Z,1520533961.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:41.786Z,1520533961.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:42.171Z,1520533962.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:42.187Z,1520533962.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:42.570Z,1520533962.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:42.587Z,1520533962.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:42.969Z,1520533962.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:42.984Z,1520533962.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:43.369Z,1520533963.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:43.384Z,1520533963.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:43.771Z,1520533963.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:43.787Z,1520533963.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:44.169Z,1520533964.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:44.184Z,1520533964.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:44.567Z,1520533964.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:44.583Z,1520533964.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:44.971Z,1520533964.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:44.995Z,1520533964.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:45.374Z,1520533965.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:45.389Z,1520533965.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:45.767Z,1520533965.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:45.783Z,1520533965.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:46.174Z,1520533966.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:46.241Z,1520533966.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:46.562Z,1520533966.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:46.598Z,1520533966.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:46.959Z,1520533966.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:46.987Z,1520533966.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:47.366Z,1520533967.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:47.398Z,1520533967.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:47.766Z,1520533967.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:47.793Z,1520533967.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:48.160Z,1520533968.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:48.191Z,1520533968.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:48.578Z,1520533968.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:48.598Z,1520533968.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:48.962Z,1520533968.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:48.997Z,1520533968.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:49.359Z,1520533969.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:49.387Z,1520533969.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:49.766Z,1520533969.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:49.792Z,1520533969.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:50.163Z,1520533970.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:50.198Z,1520533970.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:50.559Z,1520533970.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:50.582Z,1520533970.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:50.970Z,1520533970.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:50.996Z,1520533970.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:51.362Z,1520533971.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:51.404Z,1520533971.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:51.759Z,1520533971.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:51.775Z,1520533971.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:52.170Z,1520533972.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:52.210Z,1520533972.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:52.562Z,1520533972.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:52.577Z,1520533972.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:52.963Z,1520533972.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:52.983Z,1520533972.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:53.370Z,1520533973.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:53.391Z,1520533973.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:53.769Z,1520533973.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:53.784Z,1520533973.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:54.169Z,1520533974.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:54.185Z,1520533974.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:54.570Z,1520533974.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:54.587Z,1520533974.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:54.970Z,1520533974.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:54.985Z,1520533974.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:55.371Z,1520533975.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:55.386Z,1520533975.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:55.772Z,1520533975.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:55.787Z,1520533975.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:56.169Z,1520533976.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:56.184Z,1520533976.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:56.567Z,1520533976.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:56.583Z,1520533976.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:56.972Z,1520533976.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:56.987Z,1520533976.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:57.369Z,1520533977.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:57.384Z,1520533977.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:57.768Z,1520533977.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:57.784Z,1520533977.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:58.171Z,1520533978.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:58.187Z,1520533978.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:58.569Z,1520533978.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:58.584Z,1520533978.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:58.967Z,1520533978.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:58.983Z,1520533978.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:59.371Z,1520533979.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:59.391Z,1520533979.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:32:59.771Z,1520533979.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:32:59.786Z,1520533979.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:00.169Z,1520533980.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:00.185Z,1520533980.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:00.571Z,1520533980.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:00.591Z,1520533980.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:00.969Z,1520533980.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:00.984Z,1520533980.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:01.371Z,1520533981.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:01.386Z,1520533981.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:01.772Z,1520533981.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:01.787Z,1520533981.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:02.169Z,1520533982.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:02.184Z,1520533982.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:02.568Z,1520533982.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:02.583Z,1520533982.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:02.972Z,1520533982.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:02.987Z,1520533982.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:03.371Z,1520533983.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:03.386Z,1520533983.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:03.767Z,1520533983.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:03.783Z,1520533983.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:04.170Z,1520533984.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:04.191Z,1520533984.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:04.571Z,1520533984.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:04.586Z,1520533984.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:04.967Z,1520533984.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:04.983Z,1520533984.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:05.371Z,1520533985.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:05.387Z,1520533985.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:05.770Z,1520533985.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:05.784Z,1520533985.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:06.171Z,1520533986.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:06.186Z,1520533986.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:06.573Z,1520533986.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:06.588Z,1520533986.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:06.975Z,1520533986.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:07.025Z,1520533987.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:07.371Z,1520533987.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:07.387Z,1520533987.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:07.772Z,1520533987.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:07.787Z,1520533987.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:08.170Z,1520533988.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:08.185Z,1520533988.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:08.569Z,1520533988.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:08.585Z,1520533988.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:08.972Z,1520533988.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:08.987Z,1520533988.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:09.372Z,1520533989.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:09.387Z,1520533989.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:09.770Z,1520533989.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:09.785Z,1520533989.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:10.173Z,1520533990.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:10.189Z,1520533990.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:10.571Z,1520533990.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:10.586Z,1520533990.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:10.967Z,1520533990.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:10.987Z,1520533990.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:11.373Z,1520533991.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:11.388Z,1520533991.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:11.769Z,1520533991.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:11.792Z,1520533991.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:12.172Z,1520533992.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:12.188Z,1520533992.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:12.576Z,1520533992.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:12.591Z,1520533992.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:12.971Z,1520533992.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:12.986Z,1520533992.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:13.371Z,1520533993.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:13.388Z,1520533993.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:13.771Z,1520533993.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:13.786Z,1520533993.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:14.174Z,1520533994.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:14.191Z,1520533994.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:14.568Z,1520533994.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:14.584Z,1520533994.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:14.980Z,1520533994.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:14.995Z,1520533994.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:15.370Z,1520533995.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:15.385Z,1520533995.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:15.767Z,1520533995.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:15.783Z,1520533995.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:16.168Z,1520533996.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:16.195Z,1520533996.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:16.570Z,1520533996.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:16.585Z,1520533996.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:16.967Z,1520533996.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:16.983Z,1520533996.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:17.377Z,1520533997.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:17.392Z,1520533997.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:17.770Z,1520533997.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:17.785Z,1520533997.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:18.170Z,1520533998.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:18.187Z,1520533998.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:18.570Z,1520533998.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:18.590Z,1520533998.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:18.974Z,1520533998.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:18.989Z,1520533998.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:19.370Z,1520533999.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:19.385Z,1520533999.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:19.781Z,1520533999.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:19.796Z,1520533999.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:20.174Z,1520534000.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:20.189Z,1520534000.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:20.558Z,1520534000.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:20.590Z,1520534000.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:20.975Z,1520534000.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:20.990Z,1520534000.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:21.374Z,1520534001.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:21.389Z,1520534001.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:21.402Z,1520534001.402 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T18:33:21.402Z,1520534001.402 [NAL9602] No Fault, FailCount= 5
2018-03-08T18:33:21.744Z,1520534001.744 [NAL9602](INFO): Powering up NAL9602
2018-03-08T18:33:21.761Z,1520534001.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:21.793Z,1520534001.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:22.174Z,1520534002.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:22.190Z,1520534002.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:22.575Z,1520534002.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:22.590Z,1520534002.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:22.960Z,1520534002.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:22.999Z,1520534002.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:23.366Z,1520534003.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:23.393Z,1520534003.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:23.763Z,1520534003.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:23.791Z,1520534003.791 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:23.791Z,1520534003.791 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 216
2018-03-08T18:33:23.791Z,1520534003.791 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T18:33:23.793Z,1520534003.793 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:23.793Z,1520534003.793 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 216
2018-03-08T18:33:23.793Z,1520534003.793 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T18:33:23.795Z,1520534003.795 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:23.795Z,1520534003.795 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 216
2018-03-08T18:33:23.795Z,1520534003.795 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T18:33:23.806Z,1520534003.806 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T18:33:23.807Z,1520534003.807 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T18:33:23.807Z,1520534003.807 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T18:33:24.162Z,1520534004.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:24.213Z,1520534004.213 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T18:33:24.213Z,1520534004.213 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 216
2018-03-08T18:33:24.213Z,1520534004.213 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T18:33:24.213Z,1520534004.213 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 216
2018-03-08T18:33:24.214Z,1520534004.214 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T18:33:24.214Z,1520534004.214 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 216
2018-03-08T18:33:24.570Z,1520534004.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:24.601Z,1520534004.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T18:33:24.602Z,1520534004.602 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:33:24.602Z,1520534004.602 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:33:24.602Z,1520534004.602 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T18:33:24.603Z,1520534004.603 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:33:24.603Z,1520534004.603 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:33:24.603Z,1520534004.603 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T18:33:24.604Z,1520534004.604 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:33:24.604Z,1520534004.604 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:33:24.966Z,1520534004.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:25.005Z,1520534005.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T18:33:25.007Z,1520534005.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:25.366Z,1520534005.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:25.398Z,1520534005.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T18:33:25.399Z,1520534005.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:25.763Z,1520534005.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:25.798Z,1520534005.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T18:33:25.799Z,1520534005.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:26.166Z,1520534006.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:26.199Z,1520534006.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T18:33:26.200Z,1520534006.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:26.560Z,1520534006.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:26.575Z,1520534006.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T18:33:26.576Z,1520534006.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:26.966Z,1520534006.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:26.980Z,1520534006.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T18:33:27.006Z,1520534007.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:27.366Z,1520534007.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:27.405Z,1520534007.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T18:33:27.406Z,1520534007.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:27.760Z,1520534007.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:27.775Z,1520534007.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T18:33:27.777Z,1520534007.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:28.162Z,1520534008.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:28.176Z,1520534008.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T18:33:28.178Z,1520534008.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:28.570Z,1520534008.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:28.585Z,1520534008.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T18:33:28.586Z,1520534008.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:28.964Z,1520534008.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:28.979Z,1520534008.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T18:33:28.980Z,1520534008.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:29.374Z,1520534009.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:29.388Z,1520534009.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T18:33:29.389Z,1520534009.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:29.767Z,1520534009.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:29.782Z,1520534009.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T18:33:29.783Z,1520534009.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:30.171Z,1520534010.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:30.187Z,1520534010.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T18:33:30.188Z,1520534010.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:30.571Z,1520534010.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:30.586Z,1520534010.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T18:33:30.587Z,1520534010.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:30.972Z,1520534010.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:30.987Z,1520534010.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T18:33:30.987Z,1520534010.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:31.370Z,1520534011.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:31.385Z,1520534011.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T18:33:31.386Z,1520534011.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:31.778Z,1520534011.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:31.798Z,1520534011.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T18:33:31.799Z,1520534011.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:32.177Z,1520534012.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:32.192Z,1520534012.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T18:33:32.193Z,1520534012.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:32.560Z,1520534012.560 [NAL9602](INFO): NAL9602 initialized
2018-03-08T18:33:32.578Z,1520534012.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:32.593Z,1520534012.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T18:33:32.594Z,1520534012.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:32.978Z,1520534012.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:32.993Z,1520534012.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T18:33:32.994Z,1520534012.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:33.417Z,1520534013.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:33.474Z,1520534013.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-08T18:33:33.475Z,1520534013.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:33.777Z,1520534013.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:33.792Z,1520534013.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T18:33:33.793Z,1520534013.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:34.179Z,1520534014.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:34.194Z,1520534014.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T18:33:34.195Z,1520534014.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:34.572Z,1520534014.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:34.588Z,1520534014.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T18:33:34.589Z,1520534014.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:34.976Z,1520534014.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:34.991Z,1520534014.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T18:33:34.992Z,1520534014.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:35.371Z,1520534015.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:35.386Z,1520534015.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T18:33:35.387Z,1520534015.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:35.785Z,1520534015.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:35.801Z,1520534015.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T18:33:35.802Z,1520534015.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:39.029Z,1520534019.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:39.044Z,1520534019.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-08T18:33:39.045Z,1520534019.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:39.157Z,1520534019.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:39.206Z,1520534019.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2018-03-08T18:33:39.207Z,1520534019.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:39.499Z,1520534019.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:39.534Z,1520534019.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T18:33:39.535Z,1520534019.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:39.896Z,1520534019.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:39.911Z,1520534019.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T18:33:39.912Z,1520534019.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:40.291Z,1520534020.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:40.306Z,1520534020.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T18:33:40.307Z,1520534020.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:40.701Z,1520534020.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:40.734Z,1520534020.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T18:33:40.735Z,1520534020.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:41.119Z,1520534021.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:41.133Z,1520534021.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-08T18:33:41.134Z,1520534021.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:41.501Z,1520534021.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:41.527Z,1520534021.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T18:33:41.528Z,1520534021.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:41.891Z,1520534021.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:41.930Z,1520534021.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-08T18:33:41.931Z,1520534021.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:42.299Z,1520534022.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:42.336Z,1520534022.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-08T18:33:42.337Z,1520534022.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:42.687Z,1520534022.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:42.702Z,1520534022.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T18:33:42.703Z,1520534022.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:43.095Z,1520534023.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:43.110Z,1520534023.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T18:33:43.111Z,1520534023.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:43.495Z,1520534023.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:43.509Z,1520534023.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T18:33:43.510Z,1520534023.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:43.906Z,1520534023.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:43.941Z,1520534023.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:44.309Z,1520534024.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:44.333Z,1520534024.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:44.709Z,1520534024.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:44.742Z,1520534024.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:45.091Z,1520534025.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:45.114Z,1520534025.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:45.499Z,1520534025.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:45.518Z,1520534025.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:45.892Z,1520534025.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:45.930Z,1520534025.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:46.299Z,1520534026.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:46.318Z,1520534026.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:46.717Z,1520534026.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:46.742Z,1520534026.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:47.109Z,1520534027.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:47.144Z,1520534027.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:47.498Z,1520534027.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:47.513Z,1520534027.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:47.896Z,1520534027.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:47.911Z,1520534027.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:48.298Z,1520534028.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:48.313Z,1520534028.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:48.694Z,1520534028.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:48.714Z,1520534028.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:49.096Z,1520534029.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:49.123Z,1520534029.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:49.500Z,1520534029.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:49.515Z,1520534029.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:49.900Z,1520534029.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:49.915Z,1520534029.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:50.305Z,1520534030.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:50.321Z,1520534030.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:50.713Z,1520534030.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:50.749Z,1520534030.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:51.091Z,1520534031.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:51.111Z,1520534031.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:51.501Z,1520534031.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:51.516Z,1520534031.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:51.899Z,1520534031.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:51.914Z,1520534031.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:52.295Z,1520534032.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:52.310Z,1520534032.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:52.701Z,1520534032.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:52.717Z,1520534032.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:53.104Z,1520534033.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:53.126Z,1520534033.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:53.500Z,1520534033.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:53.522Z,1520534033.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:53.900Z,1520534033.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:53.915Z,1520534033.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:54.299Z,1520534034.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:54.314Z,1520534034.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:54.687Z,1520534034.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:54.710Z,1520534034.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:55.103Z,1520534035.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:55.122Z,1520534035.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:55.502Z,1520534035.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:55.518Z,1520534035.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:55.904Z,1520534035.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:55.919Z,1520534035.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:56.309Z,1520534036.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:56.324Z,1520534036.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:56.705Z,1520534036.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:56.720Z,1520534036.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:57.095Z,1520534037.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:57.115Z,1520534037.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:57.502Z,1520534037.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:57.517Z,1520534037.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:57.896Z,1520534037.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:57.911Z,1520534037.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:58.301Z,1520534038.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:58.316Z,1520534038.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:58.706Z,1520534038.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:58.721Z,1520534038.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:59.109Z,1520534039.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:59.124Z,1520534039.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:59.502Z,1520534039.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:59.530Z,1520534039.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:33:59.903Z,1520534039.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:33:59.922Z,1520534039.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:00.304Z,1520534040.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:00.320Z,1520534040.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:00.695Z,1520534040.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:00.723Z,1520534040.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:01.101Z,1520534041.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:01.116Z,1520534041.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:01.487Z,1520534041.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:01.527Z,1520534041.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:01.902Z,1520534041.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:01.929Z,1520534041.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:02.316Z,1520534042.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:02.335Z,1520534042.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:02.715Z,1520534042.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:02.729Z,1520534042.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:03.089Z,1520534043.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:03.131Z,1520534043.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:03.495Z,1520534043.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:03.530Z,1520534043.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:03.892Z,1520534043.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:03.921Z,1520534043.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:04.295Z,1520534044.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:04.325Z,1520534044.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:04.711Z,1520534044.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:04.726Z,1520534044.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:05.114Z,1520534045.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:05.141Z,1520534045.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:05.508Z,1520534045.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:05.536Z,1520534045.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:05.895Z,1520534045.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:05.923Z,1520534045.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:06.291Z,1520534046.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:06.324Z,1520534046.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:06.688Z,1520534046.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:06.719Z,1520534046.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:07.095Z,1520534047.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:07.128Z,1520534047.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:07.494Z,1520534047.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:07.529Z,1520534047.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:07.901Z,1520534047.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:07.931Z,1520534047.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:08.320Z,1520534048.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:08.342Z,1520534048.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:08.709Z,1520534048.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:08.735Z,1520534048.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:09.090Z,1520534049.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:09.109Z,1520534049.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:09.498Z,1520534049.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:09.530Z,1520534049.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:09.900Z,1520534049.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:09.915Z,1520534049.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:10.288Z,1520534050.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:10.303Z,1520534050.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:10.709Z,1520534050.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:10.732Z,1520534050.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:11.109Z,1520534051.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:11.134Z,1520534051.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:11.505Z,1520534051.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:11.529Z,1520534051.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:11.907Z,1520534051.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:11.927Z,1520534051.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:12.302Z,1520534052.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:12.317Z,1520534052.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:12.692Z,1520534052.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:12.715Z,1520534052.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:13.102Z,1520534053.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:13.122Z,1520534053.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:13.502Z,1520534053.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:13.517Z,1520534053.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:13.904Z,1520534053.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:13.919Z,1520534053.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:14.305Z,1520534054.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:14.321Z,1520534054.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:14.705Z,1520534054.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:14.726Z,1520534054.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:15.093Z,1520534055.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:15.108Z,1520534055.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:15.499Z,1520534055.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:15.514Z,1520534055.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:15.903Z,1520534055.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:15.918Z,1520534055.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:16.295Z,1520534056.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:16.310Z,1520534056.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:16.704Z,1520534056.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:16.720Z,1520534056.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:17.109Z,1520534057.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:17.124Z,1520534057.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:17.506Z,1520534057.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:17.536Z,1520534057.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:17.903Z,1520534057.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:17.922Z,1520534057.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:18.291Z,1520534058.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:18.318Z,1520534058.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:18.688Z,1520534058.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:18.722Z,1520534058.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:19.103Z,1520534059.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:19.119Z,1520534059.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:19.491Z,1520534059.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:19.527Z,1520534059.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:19.906Z,1520534059.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:19.929Z,1520534059.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:20.317Z,1520534060.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:20.333Z,1520534060.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:20.718Z,1520534060.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:20.733Z,1520534060.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:21.085Z,1520534061.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:21.108Z,1520534061.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:21.494Z,1520534061.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:21.521Z,1520534061.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:21.891Z,1520534061.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:21.923Z,1520534061.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:22.295Z,1520534062.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:22.322Z,1520534062.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:22.713Z,1520534062.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:22.729Z,1520534062.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:23.114Z,1520534063.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:23.129Z,1520534063.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:23.509Z,1520534063.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:23.527Z,1520534063.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:23.895Z,1520534063.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:23.921Z,1520534063.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:24.291Z,1520534064.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:24.307Z,1520534064.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:24.685Z,1520534064.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:24.700Z,1520534064.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:25.099Z,1520534065.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:25.129Z,1520534065.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:25.499Z,1520534065.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:25.530Z,1520534065.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:25.901Z,1520534065.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:25.926Z,1520534065.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:26.319Z,1520534066.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:26.335Z,1520534066.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:26.720Z,1520534066.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:26.742Z,1520534066.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:27.092Z,1520534067.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:27.107Z,1520534067.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:27.492Z,1520534067.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:27.534Z,1520534067.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:27.899Z,1520534067.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:27.915Z,1520534067.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:28.299Z,1520534068.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:28.318Z,1520534068.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:28.713Z,1520534068.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:28.744Z,1520534068.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:29.109Z,1520534069.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:29.137Z,1520534069.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:29.501Z,1520534069.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:29.517Z,1520534069.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:29.900Z,1520534069.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:29.922Z,1520534069.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:30.300Z,1520534070.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:30.315Z,1520534070.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:30.691Z,1520534070.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:30.723Z,1520534070.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:31.102Z,1520534071.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:31.126Z,1520534071.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:31.503Z,1520534071.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:31.518Z,1520534071.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:31.904Z,1520534071.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:31.920Z,1520534071.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:32.309Z,1520534072.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:32.324Z,1520534072.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:32.709Z,1520534072.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:32.725Z,1520534072.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:33.102Z,1520534073.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:33.117Z,1520534073.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:33.499Z,1520534073.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:33.514Z,1520534073.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:33.905Z,1520534073.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:33.921Z,1520534073.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:34.302Z,1520534074.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:34.317Z,1520534074.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:34.704Z,1520534074.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:34.726Z,1520534074.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:35.109Z,1520534075.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:35.125Z,1520534075.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:35.505Z,1520534075.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:35.521Z,1520534075.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:35.897Z,1520534075.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:35.913Z,1520534075.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:38.997Z,1520534078.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:39.012Z,1520534079.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:39.103Z,1520534079.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:39.118Z,1520534079.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:39.491Z,1520534079.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:39.506Z,1520534079.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:39.874Z,1520534079.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:39.909Z,1520534079.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:40.273Z,1520534080.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:40.309Z,1520534080.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:40.668Z,1520534080.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:40.707Z,1520534080.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:41.064Z,1520534081.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:41.081Z,1520534081.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:41.465Z,1520534081.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:41.482Z,1520534081.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:41.883Z,1520534081.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:41.914Z,1520534081.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:42.277Z,1520534082.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:42.301Z,1520534082.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:42.682Z,1520534082.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:42.716Z,1520534082.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:43.068Z,1520534083.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:43.083Z,1520534083.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:43.467Z,1520534083.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:43.483Z,1520534083.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:43.868Z,1520534083.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:43.883Z,1520534083.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:44.268Z,1520534084.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:44.283Z,1520534084.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:44.681Z,1520534084.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:44.696Z,1520534084.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:45.077Z,1520534085.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:45.092Z,1520534085.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:45.476Z,1520534085.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:45.498Z,1520534085.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:45.871Z,1520534085.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:45.886Z,1520534085.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:46.267Z,1520534086.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:46.282Z,1520534086.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:46.667Z,1520534086.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:46.682Z,1520534086.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:47.068Z,1520534087.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:47.083Z,1520534087.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:47.470Z,1520534087.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:47.486Z,1520534087.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:47.877Z,1520534087.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:47.893Z,1520534087.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:48.277Z,1520534088.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:48.292Z,1520534088.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:48.676Z,1520534088.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:48.691Z,1520534088.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:49.071Z,1520534089.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:49.086Z,1520534089.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:49.467Z,1520534089.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:49.482Z,1520534089.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:49.872Z,1520534089.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:49.887Z,1520534089.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:50.274Z,1520534090.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:50.290Z,1520534090.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:50.677Z,1520534090.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:50.692Z,1520534090.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:51.077Z,1520534091.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:51.092Z,1520534091.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:51.476Z,1520534091.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:51.498Z,1520534091.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:51.874Z,1520534091.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:51.889Z,1520534091.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:52.271Z,1520534092.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:52.290Z,1520534092.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:52.670Z,1520534092.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:52.686Z,1520534092.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:53.069Z,1520534093.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:53.084Z,1520534093.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:53.471Z,1520534093.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:53.486Z,1520534093.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:53.876Z,1520534093.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:53.892Z,1520534093.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:54.276Z,1520534094.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:54.291Z,1520534094.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:54.676Z,1520534094.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:54.698Z,1520534094.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:55.071Z,1520534095.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:55.087Z,1520534095.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:55.467Z,1520534095.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:55.482Z,1520534095.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:55.872Z,1520534095.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:55.887Z,1520534095.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:56.270Z,1520534096.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:56.290Z,1520534096.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:56.676Z,1520534096.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:56.692Z,1520534096.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:57.077Z,1520534097.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:57.093Z,1520534097.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:57.476Z,1520534097.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:57.498Z,1520534097.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:57.873Z,1520534097.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:57.888Z,1520534097.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:58.271Z,1520534098.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:58.290Z,1520534098.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:58.671Z,1520534098.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:58.690Z,1520534098.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:59.072Z,1520534099.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:59.087Z,1520534099.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:59.471Z,1520534099.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:59.490Z,1520534099.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:34:59.890Z,1520534099.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:34:59.921Z,1520534099.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:00.281Z,1520534100.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:00.295Z,1520534100.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:00.681Z,1520534100.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:00.696Z,1520534100.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:01.071Z,1520534101.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:01.090Z,1520534101.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:01.475Z,1520534101.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:01.490Z,1520534101.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:01.872Z,1520534101.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:01.887Z,1520534101.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:02.275Z,1520534102.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:02.294Z,1520534102.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:02.681Z,1520534102.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:02.696Z,1520534102.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:03.080Z,1520534103.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:03.103Z,1520534103.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:03.481Z,1520534103.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:03.499Z,1520534103.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:03.872Z,1520534103.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:03.887Z,1520534103.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:04.271Z,1520534104.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:04.290Z,1520534104.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:04.671Z,1520534104.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:04.686Z,1520534104.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:05.068Z,1520534105.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:05.090Z,1520534105.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:05.471Z,1520534105.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:05.490Z,1520534105.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:05.877Z,1520534105.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:05.892Z,1520534105.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:06.280Z,1520534106.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:06.295Z,1520534106.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:06.680Z,1520534106.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:06.696Z,1520534106.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:07.071Z,1520534107.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:07.090Z,1520534107.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:07.468Z,1520534107.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:07.483Z,1520534107.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:07.872Z,1520534107.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:07.887Z,1520534107.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:08.275Z,1520534108.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:08.295Z,1520534108.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:08.681Z,1520534108.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:08.702Z,1520534108.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:09.080Z,1520534109.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:09.095Z,1520534109.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:09.478Z,1520534109.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:09.493Z,1520534109.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:09.872Z,1520534109.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:09.887Z,1520534109.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:10.268Z,1520534110.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:10.283Z,1520534110.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:10.665Z,1520534110.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:10.693Z,1520534110.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:11.059Z,1520534111.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:11.087Z,1520534111.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:11.459Z,1520534111.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:11.485Z,1520534111.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:11.881Z,1520534111.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:11.902Z,1520534111.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:12.285Z,1520534112.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:12.300Z,1520534112.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:12.684Z,1520534112.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:12.707Z,1520534112.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:13.059Z,1520534113.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:13.085Z,1520534113.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:13.459Z,1520534113.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:13.486Z,1520534113.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:13.872Z,1520534113.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:13.887Z,1520534113.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:14.271Z,1520534114.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:14.299Z,1520534114.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:14.686Z,1520534114.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:14.701Z,1520534114.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:15.085Z,1520534115.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:15.101Z,1520534115.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:15.478Z,1520534115.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:15.493Z,1520534115.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:15.859Z,1520534115.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:15.893Z,1520534115.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:16.263Z,1520534116.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:16.291Z,1520534116.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:16.658Z,1520534116.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:16.685Z,1520534116.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:17.061Z,1520534117.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:17.091Z,1520534117.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:17.458Z,1520534117.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:17.485Z,1520534117.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:17.881Z,1520534117.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:17.897Z,1520534117.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:18.284Z,1520534118.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:18.306Z,1520534118.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:18.666Z,1520534118.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:18.701Z,1520534118.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:19.063Z,1520534119.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:19.098Z,1520534119.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:19.463Z,1520534119.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:19.493Z,1520534119.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:19.864Z,1520534119.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:19.893Z,1520534119.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:20.259Z,1520534120.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:20.287Z,1520534120.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:20.688Z,1520534120.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:20.703Z,1520534120.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:21.069Z,1520534121.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:21.106Z,1520534121.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:21.486Z,1520534121.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:21.506Z,1520534121.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:21.863Z,1520534121.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:21.898Z,1520534121.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:22.263Z,1520534122.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:22.295Z,1520534122.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:22.659Z,1520534122.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:22.690Z,1520534122.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:23.063Z,1520534123.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:23.104Z,1520534123.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:23.456Z,1520534123.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:23.471Z,1520534123.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:23.877Z,1520534123.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:23.905Z,1520534123.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:24.273Z,1520534124.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:24.301Z,1520534124.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:24.669Z,1520534124.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:24.701Z,1520534124.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:25.067Z,1520534125.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:25.102Z,1520534125.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:25.467Z,1520534125.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:25.482Z,1520534125.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:25.868Z,1520534125.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:25.884Z,1520534125.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:26.264Z,1520534126.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:26.283Z,1520534126.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:26.681Z,1520534126.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:26.713Z,1520534126.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:27.073Z,1520534127.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:27.088Z,1520534127.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:27.481Z,1520534127.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:27.512Z,1520534127.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:27.866Z,1520534127.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:27.881Z,1520534127.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:28.266Z,1520534128.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:28.281Z,1520534128.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:28.669Z,1520534128.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:28.684Z,1520534128.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:29.068Z,1520534129.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:29.082Z,1520534129.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:29.468Z,1520534129.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:29.484Z,1520534129.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:29.881Z,1520534129.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:29.911Z,1520534129.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:30.334Z,1520534130.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:30.365Z,1520534130.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:30.668Z,1520534130.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:30.684Z,1520534130.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:31.068Z,1520534131.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:31.083Z,1520534131.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:31.468Z,1520534131.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:31.483Z,1520534131.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:31.868Z,1520534131.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:31.884Z,1520534131.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:32.266Z,1520534132.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:32.281Z,1520534132.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:32.673Z,1520534132.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:32.689Z,1520534132.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:33.069Z,1520534133.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:33.085Z,1520534133.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:33.481Z,1520534133.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:33.511Z,1520534133.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:33.867Z,1520534133.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:33.882Z,1520534133.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:34.266Z,1520534134.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:34.281Z,1520534134.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:34.666Z,1520534134.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:34.681Z,1520534134.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:34.684Z,1520534134.684 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T18:30:34.6Z
2018-03-08T18:35:34.684Z,1520534134.684 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T18:35:34.685Z,1520534134.685 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T18:35:35.067Z,1520534135.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:35.082Z,1520534135.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:35.555Z,1520534135.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:35.570Z,1520534135.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:35.872Z,1520534135.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:35.916Z,1520534135.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:39.106Z,1520534139.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:39.122Z,1520534139.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:39.225Z,1520534139.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:39.270Z,1520534139.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:39.549Z,1520534139.549 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180308T074127/Courier0252.lzma
2018-03-08T18:35:39.579Z,1520534139.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:39.603Z,1520534139.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:39.980Z,1520534139.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:39.996Z,1520534139.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:40.347Z,1520534140.347 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0252.lzma.bak
2018-03-08T18:35:40.347Z,1520534140.347 [DataOverHttps](INFO): SBD MOMSN=7988114
2018-03-08T18:35:40.386Z,1520534140.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:40.401Z,1520534140.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:41.003Z,1520534141.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:41.031Z,1520534141.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:41.181Z,1520534141.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:41.220Z,1520534141.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:41.581Z,1520534141.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:41.602Z,1520534141.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:44.677Z,1520534144.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:44.693Z,1520534144.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:44.786Z,1520534144.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:44.830Z,1520534144.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:45.164Z,1520534145.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:45.179Z,1520534145.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:45.572Z,1520534145.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:45.587Z,1520534145.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:45.953Z,1520534145.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:45.983Z,1520534145.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:46.346Z,1520534146.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:46.376Z,1520534146.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:46.747Z,1520534146.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:46.777Z,1520534146.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:49.839Z,1520534149.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:49.878Z,1520534149.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:49.969Z,1520534149.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:50.006Z,1520534150.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:50.314Z,1520534150.314 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0253.lzma
2018-03-08T18:35:50.353Z,1520534150.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:50.386Z,1520534150.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:50.733Z,1520534150.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:50.748Z,1520534150.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:51.107Z,1520534151.107 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0253.lzma.bak
2018-03-08T18:35:51.108Z,1520534151.108 [DataOverHttps](INFO): SBD MOMSN=7988117
2018-03-08T18:35:51.145Z,1520534151.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:51.168Z,1520534151.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:51.711Z,1520534151.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:51.737Z,1520534151.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:51.739Z,1520534151.739 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T18:35:51.740Z,1520534151.740 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T18:35:51.740Z,1520534151.740 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T18:35:51.934Z,1520534151.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:51.955Z,1520534151.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:55.036Z,1520534155.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:55.052Z,1520534155.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:55.172Z,1520534155.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:55.206Z,1520534155.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:55.549Z,1520534155.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:55.582Z,1520534155.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:55.937Z,1520534155.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:55.952Z,1520534155.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:56.336Z,1520534156.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:56.352Z,1520534156.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:56.729Z,1520534156.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:56.749Z,1520534156.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:57.131Z,1520534157.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:57.147Z,1520534157.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:57.537Z,1520534157.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:57.553Z,1520534157.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:57.941Z,1520534157.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:57.957Z,1520534157.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:58.337Z,1520534158.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:58.358Z,1520534158.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:58.733Z,1520534158.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:58.748Z,1520534158.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:59.131Z,1520534159.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:59.145Z,1520534159.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:59.538Z,1520534159.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:59.553Z,1520534159.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:35:59.941Z,1520534159.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:35:59.957Z,1520534159.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:00.336Z,1520534160.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:00.351Z,1520534160.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:00.737Z,1520534160.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:00.752Z,1520534160.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:01.141Z,1520534161.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:01.156Z,1520534161.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:01.537Z,1520534161.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:01.552Z,1520534161.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:01.939Z,1520534161.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:01.958Z,1520534161.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:02.337Z,1520534162.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:02.352Z,1520534162.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:02.727Z,1520534162.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:02.755Z,1520534162.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:03.138Z,1520534163.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:03.153Z,1520534163.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:03.573Z,1520534163.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:03.615Z,1520534163.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:03.940Z,1520534163.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:03.966Z,1520534163.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:04.342Z,1520534164.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:04.357Z,1520534164.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:04.734Z,1520534164.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:04.755Z,1520534164.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:05.125Z,1520534165.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:05.140Z,1520534165.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:05.537Z,1520534165.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:05.583Z,1520534165.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:05.937Z,1520534165.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:05.959Z,1520534165.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:06.341Z,1520534166.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:06.370Z,1520534166.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:06.733Z,1520534166.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:06.770Z,1520534166.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:07.120Z,1520534167.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:07.136Z,1520534167.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:07.542Z,1520534167.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:07.571Z,1520534167.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:07.941Z,1520534167.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:07.966Z,1520534167.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:08.342Z,1520534168.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:08.375Z,1520534168.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:08.731Z,1520534168.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:08.763Z,1520534168.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:09.126Z,1520534169.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:09.141Z,1520534169.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:09.537Z,1520534169.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:09.570Z,1520534169.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:09.941Z,1520534169.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:09.966Z,1520534169.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:10.344Z,1520534170.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:10.370Z,1520534170.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:10.724Z,1520534170.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:10.739Z,1520534170.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:11.128Z,1520534171.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:11.166Z,1520534171.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:11.541Z,1520534171.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:11.575Z,1520534171.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:11.933Z,1520534171.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:11.948Z,1520534171.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:12.341Z,1520534172.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:12.374Z,1520534172.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:12.735Z,1520534172.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:12.750Z,1520534172.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:13.120Z,1520534173.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:13.143Z,1520534173.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:13.546Z,1520534173.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:13.575Z,1520534173.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:13.941Z,1520534173.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:13.956Z,1520534173.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:14.345Z,1520534174.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:14.381Z,1520534174.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:14.735Z,1520534174.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:14.755Z,1520534174.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:15.134Z,1520534175.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:15.149Z,1520534175.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:15.536Z,1520534175.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:15.558Z,1520534175.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:15.937Z,1520534175.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:15.952Z,1520534175.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:16.338Z,1520534176.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:16.353Z,1520534176.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:16.728Z,1520534176.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:16.750Z,1520534176.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:17.135Z,1520534177.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:17.150Z,1520534177.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:17.534Z,1520534177.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:17.549Z,1520534177.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:17.936Z,1520534177.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:17.958Z,1520534177.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:18.342Z,1520534178.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:18.357Z,1520534178.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:18.737Z,1520534178.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:18.758Z,1520534178.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:19.125Z,1520534179.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:19.141Z,1520534179.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:19.531Z,1520534179.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:19.546Z,1520534179.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:19.932Z,1520534179.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:19.954Z,1520534179.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:20.334Z,1520534180.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:20.350Z,1520534180.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:20.737Z,1520534180.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:20.753Z,1520534180.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:21.141Z,1520534181.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:21.156Z,1520534181.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:21.536Z,1520534181.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:21.551Z,1520534181.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:21.931Z,1520534181.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:21.947Z,1520534181.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:22.334Z,1520534182.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:22.349Z,1520534182.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:22.728Z,1520534182.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:22.743Z,1520534182.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:23.130Z,1520534183.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:23.156Z,1520534183.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:23.534Z,1520534183.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:23.549Z,1520534183.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:23.936Z,1520534183.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:23.952Z,1520534183.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:24.341Z,1520534184.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:24.356Z,1520534184.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:24.737Z,1520534184.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:24.758Z,1520534184.758 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:24.758Z,1520534184.758 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 217
2018-03-08T18:36:24.758Z,1520534184.758 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T18:36:24.760Z,1520534184.760 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:24.760Z,1520534184.760 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 217
2018-03-08T18:36:24.760Z,1520534184.760 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T18:36:24.762Z,1520534184.762 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:24.762Z,1520534184.762 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 217
2018-03-08T18:36:24.762Z,1520534184.762 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T18:36:24.806Z,1520534184.806 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T18:36:24.806Z,1520534184.806 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T18:36:24.806Z,1520534184.806 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T18:36:25.123Z,1520534185.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:25.156Z,1520534185.156 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T18:36:25.156Z,1520534185.156 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 217
2018-03-08T18:36:25.157Z,1520534185.157 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T18:36:25.157Z,1520534185.157 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 217
2018-03-08T18:36:25.157Z,1520534185.157 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T18:36:25.157Z,1520534185.157 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 217
2018-03-08T18:36:25.540Z,1520534185.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:25.554Z,1520534185.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T18:36:25.554Z,1520534185.554 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:36:25.554Z,1520534185.554 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:36:25.555Z,1520534185.555 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T18:36:25.555Z,1520534185.555 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:36:25.556Z,1520534185.556 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:36:25.556Z,1520534185.556 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T18:36:25.556Z,1520534185.556 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:36:25.557Z,1520534185.557 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:36:25.948Z,1520534185.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:25.962Z,1520534185.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T18:36:25.963Z,1520534185.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:26.335Z,1520534186.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:26.354Z,1520534186.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T18:36:26.355Z,1520534186.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:26.741Z,1520534186.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:26.755Z,1520534186.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T18:36:26.757Z,1520534186.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:27.144Z,1520534187.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:27.159Z,1520534187.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T18:36:27.160Z,1520534187.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:27.538Z,1520534187.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:27.561Z,1520534187.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T18:36:27.562Z,1520534187.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:27.927Z,1520534187.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:27.954Z,1520534187.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T18:36:27.955Z,1520534187.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:28.318Z,1520534188.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:28.350Z,1520534188.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T18:36:28.351Z,1520534188.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:28.717Z,1520534188.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:28.740Z,1520534188.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T18:36:28.741Z,1520534188.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:29.123Z,1520534189.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:29.155Z,1520534189.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T18:36:29.156Z,1520534189.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:29.523Z,1520534189.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:29.555Z,1520534189.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T18:36:29.556Z,1520534189.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:29.941Z,1520534189.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:29.961Z,1520534189.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T18:36:29.962Z,1520534189.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:30.349Z,1520534190.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:30.364Z,1520534190.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T18:36:30.365Z,1520534190.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:30.750Z,1520534190.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:30.764Z,1520534190.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T18:36:30.765Z,1520534190.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:31.123Z,1520534191.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:31.154Z,1520534191.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T18:36:31.155Z,1520534191.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:31.535Z,1520534191.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:31.550Z,1520534191.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T18:36:31.551Z,1520534191.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:31.936Z,1520534191.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:31.951Z,1520534191.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T18:36:31.952Z,1520534191.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:32.335Z,1520534192.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:32.354Z,1520534192.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T18:36:32.355Z,1520534192.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:32.741Z,1520534192.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:32.756Z,1520534192.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T18:36:32.757Z,1520534192.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:33.140Z,1520534193.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:33.155Z,1520534193.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T18:36:33.156Z,1520534193.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:33.536Z,1520534193.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:33.551Z,1520534193.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T18:36:33.553Z,1520534193.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:33.931Z,1520534193.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:33.945Z,1520534193.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T18:36:33.946Z,1520534193.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:34.335Z,1520534194.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:34.350Z,1520534194.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T18:36:34.351Z,1520534194.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:34.724Z,1520534194.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:34.751Z,1520534194.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T18:36:34.752Z,1520534194.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:35.135Z,1520534195.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:35.158Z,1520534195.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T18:36:35.159Z,1520534195.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:35.536Z,1520534195.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:35.550Z,1520534195.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T18:36:35.551Z,1520534195.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:35.940Z,1520534195.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:35.955Z,1520534195.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T18:36:35.956Z,1520534195.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:36.340Z,1520534196.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:36.362Z,1520534196.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T18:36:36.363Z,1520534196.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:36.740Z,1520534196.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:36.755Z,1520534196.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T18:36:36.756Z,1520534196.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:37.124Z,1520534197.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:37.154Z,1520534197.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T18:36:37.155Z,1520534197.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:37.536Z,1520534197.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:37.558Z,1520534197.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T18:36:37.559Z,1520534197.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:37.936Z,1520534197.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:37.951Z,1520534197.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T18:36:37.951Z,1520534197.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:38.337Z,1520534198.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:38.351Z,1520534198.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T18:36:38.353Z,1520534198.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:38.741Z,1520534198.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:38.755Z,1520534198.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T18:36:38.757Z,1520534198.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:39.141Z,1520534199.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:39.155Z,1520534199.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T18:36:39.156Z,1520534199.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:39.542Z,1520534199.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:39.557Z,1520534199.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T18:36:39.558Z,1520534199.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:39.935Z,1520534199.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:39.954Z,1520534199.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T18:36:39.955Z,1520534199.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:40.332Z,1520534200.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:40.347Z,1520534200.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T18:36:40.348Z,1520534200.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:40.721Z,1520534200.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:40.749Z,1520534200.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T18:36:40.750Z,1520534200.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:41.137Z,1520534201.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:41.152Z,1520534201.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T18:36:41.153Z,1520534201.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:41.519Z,1520534201.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:41.554Z,1520534201.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T18:36:41.555Z,1520534201.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:41.935Z,1520534201.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:41.962Z,1520534201.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T18:36:41.962Z,1520534201.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:42.349Z,1520534202.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:42.364Z,1520534202.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T18:36:42.365Z,1520534202.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:42.746Z,1520534202.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:42.761Z,1520534202.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T18:36:42.762Z,1520534202.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:43.117Z,1520534203.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:43.151Z,1520534203.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T18:36:43.152Z,1520534203.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:43.523Z,1520534203.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:43.550Z,1520534203.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T18:36:43.551Z,1520534203.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:43.924Z,1520534203.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:43.950Z,1520534203.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T18:36:43.951Z,1520534203.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:44.337Z,1520534204.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:44.352Z,1520534204.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T18:36:44.353Z,1520534204.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:44.742Z,1520534204.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:44.757Z,1520534204.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T18:36:44.758Z,1520534204.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:45.149Z,1520534205.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:45.164Z,1520534205.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:45.538Z,1520534205.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:45.560Z,1520534205.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:45.923Z,1520534205.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:45.950Z,1520534205.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:46.323Z,1520534206.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:46.360Z,1520534206.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:46.720Z,1520534206.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:46.759Z,1520534206.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:47.127Z,1520534207.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:47.155Z,1520534207.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:47.522Z,1520534207.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:47.550Z,1520534207.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:47.941Z,1520534207.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:47.957Z,1520534207.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:48.345Z,1520534208.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:48.362Z,1520534208.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:48.743Z,1520534208.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:48.770Z,1520534208.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:49.121Z,1520534209.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:49.148Z,1520534209.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:49.522Z,1520534209.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:49.549Z,1520534209.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:49.923Z,1520534209.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:49.958Z,1520534209.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:50.327Z,1520534210.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:50.353Z,1520534210.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:50.742Z,1520534210.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:50.757Z,1520534210.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:51.137Z,1520534211.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:51.169Z,1520534211.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:51.533Z,1520534211.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:51.568Z,1520534211.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:51.934Z,1520534211.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:51.967Z,1520534211.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:52.331Z,1520534212.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:52.346Z,1520534212.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:55.424Z,1520534215.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:55.442Z,1520534215.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:55.540Z,1520534215.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:55.578Z,1520534215.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:55.942Z,1520534215.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:55.974Z,1520534215.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:56.333Z,1520534216.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:56.348Z,1520534216.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:56.733Z,1520534216.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:56.749Z,1520534216.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:57.124Z,1520534217.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:57.139Z,1520534217.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:57.516Z,1520534217.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:57.546Z,1520534217.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:57.927Z,1520534217.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:57.943Z,1520534217.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:58.323Z,1520534218.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:58.338Z,1520534218.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:58.733Z,1520534218.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:58.748Z,1520534218.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:59.133Z,1520534219.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:59.148Z,1520534219.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:59.533Z,1520534219.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:59.554Z,1520534219.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:36:59.908Z,1520534219.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:36:59.940Z,1520534219.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:00.327Z,1520534220.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:00.346Z,1520534220.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:00.715Z,1520534220.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:00.744Z,1520534220.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:01.113Z,1520534221.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:01.146Z,1520534221.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:01.528Z,1520534221.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:01.543Z,1520534221.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:01.938Z,1520534221.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:01.953Z,1520534221.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:02.333Z,1520534222.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:02.348Z,1520534222.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:02.737Z,1520534222.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:02.758Z,1520534222.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:03.128Z,1520534223.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:03.143Z,1520534223.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:03.513Z,1520534223.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:03.540Z,1520534223.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:03.919Z,1520534223.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:03.950Z,1520534223.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:04.319Z,1520534224.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:04.352Z,1520534224.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:04.738Z,1520534224.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:04.753Z,1520534224.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:05.137Z,1520534225.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:05.155Z,1520534225.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:05.540Z,1520534225.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:05.555Z,1520534225.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:05.912Z,1520534225.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:05.927Z,1520534225.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:06.314Z,1520534226.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:06.350Z,1520534226.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:06.719Z,1520534226.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:06.735Z,1520534226.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:07.116Z,1520534227.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:07.131Z,1520534227.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:07.522Z,1520534227.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:07.539Z,1520534227.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:07.937Z,1520534227.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:07.963Z,1520534227.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:08.333Z,1520534228.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:08.364Z,1520534228.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:08.737Z,1520534228.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:08.768Z,1520534228.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:09.123Z,1520534229.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:09.139Z,1520534229.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:09.523Z,1520534229.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:09.546Z,1520534229.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:09.924Z,1520534229.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:09.946Z,1520534229.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:10.325Z,1520534230.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:10.340Z,1520534230.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:10.737Z,1520534230.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:10.773Z,1520534230.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:11.133Z,1520534231.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:11.148Z,1520534231.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:11.533Z,1520534231.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:11.549Z,1520534231.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:11.927Z,1520534231.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:11.942Z,1520534231.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:12.322Z,1520534232.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:12.338Z,1520534232.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:12.728Z,1520534232.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:12.744Z,1520534232.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:13.128Z,1520534233.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:13.143Z,1520534233.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:13.524Z,1520534233.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:13.539Z,1520534233.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:13.933Z,1520534233.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:13.949Z,1520534233.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:14.333Z,1520534234.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:14.348Z,1520534234.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:14.733Z,1520534234.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:14.748Z,1520534234.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:15.124Z,1520534235.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:15.148Z,1520534235.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:15.527Z,1520534235.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:15.546Z,1520534235.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:15.925Z,1520534235.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:15.940Z,1520534235.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:16.332Z,1520534236.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:16.348Z,1520534236.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:16.737Z,1520534236.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:16.752Z,1520534236.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:17.137Z,1520534237.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:17.152Z,1520534237.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:17.537Z,1520534237.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:17.553Z,1520534237.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:17.929Z,1520534237.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:17.944Z,1520534237.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:18.325Z,1520534238.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:18.340Z,1520534238.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:18.711Z,1520534238.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:18.751Z,1520534238.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:19.129Z,1520534239.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:19.145Z,1520534239.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:19.514Z,1520534239.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:19.553Z,1520534239.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:19.942Z,1520534239.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:19.963Z,1520534239.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:20.340Z,1520534240.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:20.362Z,1520534240.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:20.735Z,1520534240.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:20.750Z,1520534240.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:21.128Z,1520534241.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:21.144Z,1520534241.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:21.515Z,1520534241.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:21.542Z,1520534241.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:21.933Z,1520534241.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:21.949Z,1520534241.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:22.319Z,1520534242.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:22.348Z,1520534242.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:22.738Z,1520534242.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:22.755Z,1520534242.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:23.141Z,1520534243.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:23.157Z,1520534243.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:23.542Z,1520534243.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:23.558Z,1520534243.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:23.919Z,1520534243.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:23.947Z,1520534243.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:24.315Z,1520534244.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:24.341Z,1520534244.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:24.716Z,1520534244.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:24.744Z,1520534244.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:25.119Z,1520534245.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:25.147Z,1520534245.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:25.518Z,1520534245.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:25.550Z,1520534245.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:25.932Z,1520534245.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:25.953Z,1520534245.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:26.341Z,1520534246.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:26.357Z,1520534246.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:26.730Z,1520534246.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:26.766Z,1520534246.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:27.119Z,1520534247.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:27.146Z,1520534247.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:27.519Z,1520534247.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:27.546Z,1520534247.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:27.915Z,1520534247.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:27.946Z,1520534247.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:28.311Z,1520534248.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:28.347Z,1520534248.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:28.738Z,1520534248.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:28.753Z,1520534248.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:29.135Z,1520534249.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:29.155Z,1520534249.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:29.538Z,1520534249.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:29.553Z,1520534249.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:29.919Z,1520534249.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:29.945Z,1520534249.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:30.315Z,1520534250.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:30.347Z,1520534250.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:30.719Z,1520534250.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:30.751Z,1520534250.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:31.119Z,1520534251.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:31.151Z,1520534251.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:31.519Z,1520534251.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:31.551Z,1520534251.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:31.925Z,1520534251.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:31.960Z,1520534251.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:32.341Z,1520534252.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:32.356Z,1520534252.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:32.725Z,1520534252.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:32.763Z,1520534252.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:33.115Z,1520534253.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:33.154Z,1520534253.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:33.519Z,1520534253.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:33.535Z,1520534253.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:33.927Z,1520534253.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:33.960Z,1520534253.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:34.319Z,1520534254.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:34.334Z,1520534254.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:34.733Z,1520534254.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:34.757Z,1520534254.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:35.133Z,1520534255.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:35.158Z,1520534255.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:35.532Z,1520534255.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:35.563Z,1520534255.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:35.923Z,1520534255.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:35.959Z,1520534255.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:36.321Z,1520534256.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:36.336Z,1520534256.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:36.719Z,1520534256.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:36.734Z,1520534256.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:37.123Z,1520534257.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:37.139Z,1520534257.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:37.520Z,1520534257.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:37.539Z,1520534257.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:37.937Z,1520534257.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:37.961Z,1520534257.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:38.338Z,1520534258.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:38.361Z,1520534258.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:38.729Z,1520534258.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:38.757Z,1520534258.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:39.124Z,1520534259.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:39.139Z,1520534259.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:39.524Z,1520534259.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:39.539Z,1520534259.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:39.924Z,1520534259.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:39.939Z,1520534259.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:40.319Z,1520534260.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:40.334Z,1520534260.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:40.733Z,1520534260.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:40.769Z,1520534260.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:41.137Z,1520534261.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:41.152Z,1520534261.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:41.529Z,1520534261.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:41.550Z,1520534261.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:41.924Z,1520534261.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:41.939Z,1520534261.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:42.323Z,1520534262.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:42.338Z,1520534262.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:42.726Z,1520534262.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:42.741Z,1520534262.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:43.128Z,1520534263.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:43.143Z,1520534263.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:43.523Z,1520534263.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:43.538Z,1520534263.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:43.929Z,1520534263.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:43.950Z,1520534263.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:44.333Z,1520534264.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:44.348Z,1520534264.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:44.729Z,1520534264.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:44.745Z,1520534264.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:45.127Z,1520534265.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:45.142Z,1520534265.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:45.526Z,1520534265.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:45.542Z,1520534265.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:45.927Z,1520534265.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:45.942Z,1520534265.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:46.326Z,1520534266.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:46.341Z,1520534266.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:46.729Z,1520534266.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:46.745Z,1520534266.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:47.129Z,1520534267.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:47.145Z,1520534267.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:47.529Z,1520534267.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:47.550Z,1520534267.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:47.925Z,1520534267.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:47.940Z,1520534267.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:48.323Z,1520534268.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:48.342Z,1520534268.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:48.726Z,1520534268.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:48.741Z,1520534268.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:49.127Z,1520534269.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:49.147Z,1520534269.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:49.526Z,1520534269.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:49.547Z,1520534269.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:49.930Z,1520534269.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:49.945Z,1520534269.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:50.333Z,1520534270.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:50.348Z,1520534270.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:50.728Z,1520534270.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:50.743Z,1520534270.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:51.123Z,1520534271.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:51.138Z,1520534271.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:51.523Z,1520534271.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:51.538Z,1520534271.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:51.927Z,1520534271.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:51.943Z,1520534271.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:52.325Z,1520534272.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:52.339Z,1520534272.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:52.741Z,1520534272.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:52.773Z,1520534272.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:55.840Z,1520534275.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:55.856Z,1520534275.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:55.969Z,1520534275.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:56.010Z,1520534276.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:56.343Z,1520534276.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:56.363Z,1520534276.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:56.745Z,1520534276.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:56.760Z,1520534276.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:57.138Z,1520534277.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:57.166Z,1520534277.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:57.557Z,1520534277.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:57.589Z,1520534277.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:57.953Z,1520534277.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:57.968Z,1520534277.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:58.350Z,1520534278.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:58.366Z,1520534278.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:58.742Z,1520534278.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:58.771Z,1520534278.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:59.148Z,1520534279.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:59.163Z,1520534279.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:59.551Z,1520534279.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:59.575Z,1520534279.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:37:59.957Z,1520534279.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:37:59.973Z,1520534279.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:00.358Z,1520534280.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:00.373Z,1520534280.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:00.748Z,1520534280.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:00.765Z,1520534280.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:01.147Z,1520534281.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:01.162Z,1520534281.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:01.557Z,1520534281.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:01.573Z,1520534281.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:01.952Z,1520534281.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:01.968Z,1520534281.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:02.357Z,1520534282.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:02.373Z,1520534282.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:02.745Z,1520534282.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:02.760Z,1520534282.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:03.141Z,1520534283.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:03.161Z,1520534283.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:03.554Z,1520534283.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:03.571Z,1520534283.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:03.954Z,1520534283.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:03.970Z,1520534283.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:04.350Z,1520534284.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:04.371Z,1520534284.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:04.749Z,1520534284.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:04.764Z,1520534284.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:05.148Z,1520534285.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:05.163Z,1520534285.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:05.554Z,1520534285.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:05.570Z,1520534285.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:05.957Z,1520534285.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:05.972Z,1520534285.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:06.354Z,1520534286.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:06.370Z,1520534286.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:06.736Z,1520534286.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:06.759Z,1520534286.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:07.143Z,1520534287.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:07.167Z,1520534287.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:07.558Z,1520534287.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:07.600Z,1520534287.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:07.953Z,1520534287.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:07.969Z,1520534287.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:08.356Z,1520534288.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:08.372Z,1520534288.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:08.757Z,1520534288.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:08.778Z,1520534288.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:09.129Z,1520534289.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:09.156Z,1520534289.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:09.546Z,1520534289.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:09.562Z,1520534289.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:09.934Z,1520534289.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:09.962Z,1520534289.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:10.347Z,1520534290.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:10.363Z,1520534290.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:10.753Z,1520534290.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:10.769Z,1520534290.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:11.158Z,1520534291.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:11.173Z,1520534291.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:11.550Z,1520534291.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:11.577Z,1520534291.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:11.938Z,1520534291.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:11.965Z,1520534291.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:12.335Z,1520534292.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:12.363Z,1520534292.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:12.732Z,1520534292.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:12.775Z,1520534292.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:13.136Z,1520534293.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:13.167Z,1520534293.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:13.538Z,1520534293.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:13.566Z,1520534293.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:13.941Z,1520534293.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:13.975Z,1520534293.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:14.355Z,1520534294.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:14.375Z,1520534294.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:14.757Z,1520534294.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:14.778Z,1520534294.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:15.132Z,1520534295.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:15.164Z,1520534295.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:15.538Z,1520534295.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:15.570Z,1520534295.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:15.935Z,1520534295.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:15.979Z,1520534295.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:16.339Z,1520534296.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:16.370Z,1520534296.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:16.745Z,1520534296.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:16.780Z,1520534296.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:17.163Z,1520534297.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:17.182Z,1520534297.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:17.541Z,1520534297.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:17.573Z,1520534297.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:17.938Z,1520534297.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:17.975Z,1520534297.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:18.343Z,1520534298.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:18.384Z,1520534298.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:18.734Z,1520534298.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:18.754Z,1520534298.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:19.143Z,1520534299.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:19.182Z,1520534299.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:19.543Z,1520534299.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:19.562Z,1520534299.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:19.942Z,1520534299.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:19.957Z,1520534299.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:20.353Z,1520534300.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:20.384Z,1520534300.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:20.753Z,1520534300.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:20.790Z,1520534300.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:21.138Z,1520534301.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:21.153Z,1520534301.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:21.553Z,1520534301.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:21.569Z,1520534301.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:21.937Z,1520534301.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:21.954Z,1520534301.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:22.336Z,1520534302.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:22.351Z,1520534302.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:22.749Z,1520534302.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:22.765Z,1520534302.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:23.149Z,1520534303.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:23.165Z,1520534303.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:23.545Z,1520534303.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:23.561Z,1520534303.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:23.936Z,1520534303.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:23.951Z,1520534303.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:24.376Z,1520534304.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:24.405Z,1520534304.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:24.730Z,1520534304.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:24.745Z,1520534304.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:25.137Z,1520534305.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:25.152Z,1520534305.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:25.539Z,1520534305.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:25.559Z,1520534305.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:25.949Z,1520534305.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:25.965Z,1520534305.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:26.350Z,1520534306.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:26.371Z,1520534306.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:26.750Z,1520534306.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:26.771Z,1520534306.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:27.137Z,1520534307.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:27.165Z,1520534307.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:27.547Z,1520534307.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:27.567Z,1520534307.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:27.949Z,1520534307.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:27.965Z,1520534307.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:28.331Z,1520534308.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:28.363Z,1520534308.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:28.757Z,1520534308.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:28.773Z,1520534308.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:29.157Z,1520534309.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:29.172Z,1520534309.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:29.557Z,1520534309.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:29.572Z,1520534309.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:29.946Z,1520534309.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:29.967Z,1520534309.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:30.348Z,1520534310.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:30.364Z,1520534310.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:30.743Z,1520534310.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:30.762Z,1520534310.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:31.144Z,1520534311.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:31.167Z,1520534311.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:31.558Z,1520534311.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:31.574Z,1520534311.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:31.955Z,1520534311.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:31.971Z,1520534311.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:32.358Z,1520534312.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:32.378Z,1520534312.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:32.747Z,1520534312.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:32.763Z,1520534312.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:33.147Z,1520534313.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:33.167Z,1520534313.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:33.558Z,1520534313.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:33.573Z,1520534313.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:33.954Z,1520534313.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:33.970Z,1520534313.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:34.357Z,1520534314.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:34.373Z,1520534314.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:34.750Z,1520534314.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:34.765Z,1520534314.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:35.149Z,1520534315.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:35.164Z,1520534315.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:35.558Z,1520534315.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:35.579Z,1520534315.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:35.957Z,1520534315.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:35.972Z,1520534315.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:36.357Z,1520534316.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:36.373Z,1520534316.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:36.748Z,1520534316.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:36.764Z,1520534316.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:37.143Z,1520534317.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:37.167Z,1520534317.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:37.557Z,1520534317.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:37.573Z,1520534317.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:37.956Z,1520534317.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:37.978Z,1520534317.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:38.357Z,1520534318.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:38.373Z,1520534318.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:38.749Z,1520534318.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:38.764Z,1520534318.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:39.147Z,1520534319.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:39.163Z,1520534319.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:39.567Z,1520534319.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:39.584Z,1520534319.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:39.953Z,1520534319.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:39.980Z,1520534319.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:40.353Z,1520534320.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:40.378Z,1520534320.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:40.739Z,1520534320.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:40.754Z,1520534320.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:41.141Z,1520534321.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:41.156Z,1520534321.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:41.553Z,1520534321.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:41.589Z,1520534321.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:41.957Z,1520534321.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:41.988Z,1520534321.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:42.349Z,1520534322.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:42.390Z,1520534322.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:42.742Z,1520534322.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:42.761Z,1520534322.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:43.142Z,1520534323.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:43.158Z,1520534323.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:43.550Z,1520534323.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:43.565Z,1520534323.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:43.958Z,1520534323.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:43.987Z,1520534323.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:44.345Z,1520534324.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:44.361Z,1520534324.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:44.744Z,1520534324.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:44.759Z,1520534324.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:45.144Z,1520534325.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:45.159Z,1520534325.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:45.545Z,1520534325.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:45.562Z,1520534325.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:45.957Z,1520534325.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:45.995Z,1520534325.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:46.357Z,1520534326.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:46.393Z,1520534326.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:46.747Z,1520534326.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:46.762Z,1520534326.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:47.146Z,1520534327.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:47.161Z,1520534327.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:47.549Z,1520534327.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:47.565Z,1520534327.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:47.950Z,1520534327.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:47.965Z,1520534327.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:48.349Z,1520534328.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:48.370Z,1520534328.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:48.745Z,1520534328.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:48.761Z,1520534328.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:49.146Z,1520534329.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:49.166Z,1520534329.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:49.549Z,1520534329.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:49.564Z,1520534329.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:49.953Z,1520534329.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:49.975Z,1520534329.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:50.349Z,1520534330.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:50.365Z,1520534330.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:50.748Z,1520534330.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:50.770Z,1520534330.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:51.143Z,1520534331.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:51.158Z,1520534331.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:51.546Z,1520534331.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:51.566Z,1520534331.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:51.949Z,1520534331.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:51.964Z,1520534331.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:52.353Z,1520534332.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:52.368Z,1520534332.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:52.749Z,1520534332.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:52.764Z,1520534332.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:55.847Z,1520534335.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:55.867Z,1520534335.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:55.961Z,1520534335.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:56.006Z,1520534336.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:56.356Z,1520534336.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:56.372Z,1520534336.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:56.756Z,1520534336.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:56.772Z,1520534336.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:57.156Z,1520534337.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:57.179Z,1520534337.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:57.543Z,1520534337.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:57.559Z,1520534337.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:57.927Z,1520534337.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:57.958Z,1520534337.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:58.343Z,1520534338.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:58.362Z,1520534338.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:58.749Z,1520534338.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:58.765Z,1520534338.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:59.156Z,1520534339.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:59.171Z,1520534339.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:59.554Z,1520534339.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:59.569Z,1520534339.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:38:59.942Z,1520534339.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:38:59.963Z,1520534339.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:00.344Z,1520534340.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:00.359Z,1520534340.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:00.744Z,1520534340.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:00.759Z,1520534340.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:01.131Z,1520534341.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:01.166Z,1520534341.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:01.554Z,1520534341.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:01.570Z,1520534341.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:01.953Z,1520534341.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:01.974Z,1520534341.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:02.353Z,1520534342.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:02.368Z,1520534342.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:02.744Z,1520534342.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:02.759Z,1520534342.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:03.142Z,1520534343.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:03.158Z,1520534343.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:03.549Z,1520534343.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:03.565Z,1520534343.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:03.956Z,1520534343.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:03.971Z,1520534343.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:04.354Z,1520534344.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:04.369Z,1520534344.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:04.730Z,1520534344.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:04.757Z,1520534344.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:05.144Z,1520534345.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:05.159Z,1520534345.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:05.553Z,1520534345.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:05.568Z,1520534345.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:05.956Z,1520534345.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:05.978Z,1520534345.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:06.347Z,1520534346.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:06.384Z,1520534346.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:06.732Z,1520534346.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:06.758Z,1520534346.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:07.131Z,1520534347.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:07.167Z,1520534347.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:07.534Z,1520534347.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:07.562Z,1520534347.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:07.953Z,1520534347.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:07.969Z,1520534347.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:08.353Z,1520534348.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:08.368Z,1520534348.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:08.748Z,1520534348.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:08.763Z,1520534348.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:09.135Z,1520534349.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:09.166Z,1520534349.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:09.531Z,1520534349.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:09.557Z,1520534349.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:09.930Z,1520534349.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:09.970Z,1520534349.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:10.335Z,1520534350.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:10.361Z,1520534350.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:10.749Z,1520534350.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:10.765Z,1520534350.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:11.154Z,1520534351.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:11.174Z,1520534351.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:11.541Z,1520534351.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:11.564Z,1520534351.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:11.931Z,1520534351.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:11.970Z,1520534351.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:12.335Z,1520534352.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:12.364Z,1520534352.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:12.725Z,1520534352.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:12.749Z,1520534352.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:13.131Z,1520534353.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:13.163Z,1520534353.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:13.534Z,1520534353.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:13.568Z,1520534353.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:13.937Z,1520534353.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:13.975Z,1520534353.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:14.346Z,1520534354.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:14.374Z,1520534354.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:14.748Z,1520534354.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:14.775Z,1520534354.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:15.132Z,1520534355.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:15.147Z,1520534355.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:15.535Z,1520534355.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:15.575Z,1520534355.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:15.939Z,1520534355.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:15.954Z,1520534355.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:16.332Z,1520534356.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:16.347Z,1520534356.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:16.746Z,1520534356.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:16.776Z,1520534356.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:17.149Z,1520534357.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:17.174Z,1520534357.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:17.545Z,1520534357.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:17.577Z,1520534357.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:17.935Z,1520534357.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:17.950Z,1520534357.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:18.336Z,1520534358.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:18.351Z,1520534358.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:18.732Z,1520534358.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:18.747Z,1520534358.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:19.139Z,1520534359.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:19.178Z,1520534359.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:19.540Z,1520534359.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:19.555Z,1520534359.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:19.938Z,1520534359.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:19.953Z,1520534359.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:20.354Z,1520534360.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:20.383Z,1520534360.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:20.749Z,1520534360.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:20.764Z,1520534360.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:21.136Z,1520534361.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:21.152Z,1520534361.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:21.539Z,1520534361.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:21.555Z,1520534361.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:21.943Z,1520534361.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:21.959Z,1520534361.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:22.341Z,1520534362.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:22.357Z,1520534362.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:22.744Z,1520534362.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:22.759Z,1520534362.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:23.149Z,1520534363.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:23.164Z,1520534363.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:23.546Z,1520534363.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:23.562Z,1520534363.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:23.939Z,1520534363.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:23.959Z,1520534363.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:24.342Z,1520534364.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:24.357Z,1520534364.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:24.736Z,1520534364.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:24.752Z,1520534364.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:25.138Z,1520534365.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:25.159Z,1520534365.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:25.543Z,1520534365.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:25.558Z,1520534365.558 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:25.559Z,1520534365.559 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 218
2018-03-08T18:39:25.559Z,1520534365.559 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T18:39:25.560Z,1520534365.560 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:25.561Z,1520534365.561 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 218
2018-03-08T18:39:25.561Z,1520534365.561 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T18:39:25.562Z,1520534365.562 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:25.562Z,1520534365.562 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 218
2018-03-08T18:39:25.562Z,1520534365.562 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T18:39:25.575Z,1520534365.575 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T18:39:25.575Z,1520534365.575 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T18:39:25.575Z,1520534365.575 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T18:39:25.946Z,1520534365.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:25.984Z,1520534365.984 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T18:39:25.984Z,1520534365.984 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 218
2018-03-08T18:39:25.984Z,1520534365.984 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T18:39:25.989Z,1520534365.989 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 218
2018-03-08T18:39:25.989Z,1520534365.989 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T18:39:25.989Z,1520534365.989 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 218
2018-03-08T18:39:26.354Z,1520534366.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:26.368Z,1520534366.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T18:39:26.368Z,1520534366.368 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:39:26.369Z,1520534366.369 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:39:26.369Z,1520534366.369 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T18:39:26.369Z,1520534366.369 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:39:26.370Z,1520534366.370 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:39:26.370Z,1520534366.370 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T18:39:26.370Z,1520534366.370 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:39:26.371Z,1520534366.371 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:39:26.740Z,1520534366.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:26.775Z,1520534366.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T18:39:26.776Z,1520534366.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:27.125Z,1520534367.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:27.139Z,1520534367.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T18:39:27.148Z,1520534367.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:27.530Z,1520534367.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:27.570Z,1520534367.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T18:39:27.571Z,1520534367.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:27.935Z,1520534367.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:27.950Z,1520534367.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T18:39:27.951Z,1520534367.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:28.335Z,1520534368.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:28.374Z,1520534368.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T18:39:28.375Z,1520534368.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:28.749Z,1520534368.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:28.775Z,1520534368.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T18:39:28.776Z,1520534368.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:29.163Z,1520534369.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:29.182Z,1520534369.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T18:39:29.183Z,1520534369.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:29.541Z,1520534369.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:29.568Z,1520534369.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T18:39:29.573Z,1520534369.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:29.938Z,1520534369.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:29.974Z,1520534369.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T18:39:29.975Z,1520534369.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:30.338Z,1520534370.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:30.353Z,1520534370.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T18:39:30.354Z,1520534370.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:30.731Z,1520534370.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:30.746Z,1520534370.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T18:39:30.747Z,1520534370.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:31.137Z,1520534371.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:31.152Z,1520534371.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T18:39:31.153Z,1520534371.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:31.538Z,1520534371.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:31.553Z,1520534371.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T18:39:31.554Z,1520534371.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:31.941Z,1520534371.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:31.956Z,1520534371.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T18:39:31.957Z,1520534371.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:32.353Z,1520534372.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:32.376Z,1520534372.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T18:39:32.378Z,1520534372.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:32.749Z,1520534372.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:32.798Z,1520534372.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T18:39:32.799Z,1520534372.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:33.134Z,1520534373.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:33.154Z,1520534373.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T18:39:33.155Z,1520534373.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:33.536Z,1520534373.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:33.550Z,1520534373.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T18:39:33.551Z,1520534373.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:33.941Z,1520534373.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:33.955Z,1520534373.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T18:39:33.956Z,1520534373.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:34.340Z,1520534374.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:34.355Z,1520534374.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T18:39:34.355Z,1520534374.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:34.745Z,1520534374.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:34.760Z,1520534374.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T18:39:34.761Z,1520534374.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:35.154Z,1520534375.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:35.184Z,1520534375.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T18:39:35.185Z,1520534375.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:35.541Z,1520534375.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:35.556Z,1520534375.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T18:39:35.557Z,1520534375.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:35.940Z,1520534375.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:35.962Z,1520534375.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T18:39:35.963Z,1520534375.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:36.339Z,1520534376.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:36.354Z,1520534376.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T18:39:36.355Z,1520534376.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:36.737Z,1520534376.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:36.752Z,1520534376.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T18:39:36.753Z,1520534376.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:37.139Z,1520534377.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:37.162Z,1520534377.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T18:39:37.163Z,1520534377.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:37.545Z,1520534377.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:37.560Z,1520534377.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T18:39:37.561Z,1520534377.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:37.945Z,1520534377.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:37.959Z,1520534377.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T18:39:37.961Z,1520534377.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:38.345Z,1520534378.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:38.360Z,1520534378.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T18:39:38.361Z,1520534378.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:38.740Z,1520534378.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:38.755Z,1520534378.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T18:39:38.756Z,1520534378.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:39.137Z,1520534379.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:39.152Z,1520534379.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T18:39:39.153Z,1520534379.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:39.535Z,1520534379.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:39.561Z,1520534379.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T18:39:39.562Z,1520534379.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:39.946Z,1520534379.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:39.961Z,1520534379.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T18:39:39.961Z,1520534379.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:40.349Z,1520534380.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:40.364Z,1520534380.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T18:39:40.365Z,1520534380.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:40.745Z,1520534380.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:40.760Z,1520534380.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T18:39:40.761Z,1520534380.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:41.142Z,1520534381.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:41.157Z,1520534381.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T18:39:41.158Z,1520534381.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:41.542Z,1520534381.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:41.562Z,1520534381.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T18:39:41.563Z,1520534381.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:41.943Z,1520534381.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:41.962Z,1520534381.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T18:39:41.963Z,1520534381.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:42.341Z,1520534382.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:42.355Z,1520534382.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T18:39:42.356Z,1520534382.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:42.742Z,1520534382.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:42.765Z,1520534382.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T18:39:42.766Z,1520534382.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:43.149Z,1520534383.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:43.164Z,1520534383.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T18:39:43.165Z,1520534383.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:43.549Z,1520534383.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:43.563Z,1520534383.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T18:39:43.564Z,1520534383.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:43.936Z,1520534383.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:43.951Z,1520534383.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T18:39:43.952Z,1520534383.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:44.335Z,1520534384.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:44.358Z,1520534384.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T18:39:44.359Z,1520534384.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:44.745Z,1520534384.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:44.759Z,1520534384.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T18:39:44.760Z,1520534384.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:45.128Z,1520534385.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:45.157Z,1520534385.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T18:39:45.158Z,1520534385.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:45.548Z,1520534385.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:45.572Z,1520534385.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:45.956Z,1520534385.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:45.971Z,1520534385.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:46.353Z,1520534386.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:46.374Z,1520534386.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:46.743Z,1520534386.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:46.759Z,1520534386.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:47.130Z,1520534387.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:47.158Z,1520534387.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:47.555Z,1520534387.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:47.571Z,1520534387.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:47.956Z,1520534387.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:47.978Z,1520534387.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:48.354Z,1520534388.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:48.369Z,1520534388.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:48.726Z,1520534388.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:48.757Z,1520534388.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:49.132Z,1520534389.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:49.163Z,1520534389.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:49.531Z,1520534389.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:49.560Z,1520534389.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:49.951Z,1520534389.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:49.966Z,1520534389.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:50.354Z,1520534390.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:50.369Z,1520534390.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:50.755Z,1520534390.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:50.770Z,1520534390.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:51.130Z,1520534391.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:51.174Z,1520534391.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:51.534Z,1520534391.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:51.571Z,1520534391.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:51.932Z,1520534391.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:51.948Z,1520534391.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:52.333Z,1520534392.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:52.365Z,1520534392.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:52.745Z,1520534392.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:52.773Z,1520534392.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:55.871Z,1520534395.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:55.886Z,1520534395.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:55.994Z,1520534395.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:56.038Z,1520534396.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:56.380Z,1520534396.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:56.418Z,1520534396.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:56.776Z,1520534396.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:56.792Z,1520534396.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:57.174Z,1520534397.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:57.197Z,1520534397.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:57.577Z,1520534397.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:57.593Z,1520534397.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:57.976Z,1520534397.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:57.991Z,1520534397.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:58.389Z,1520534398.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:58.425Z,1520534398.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:58.779Z,1520534398.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:58.795Z,1520534398.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:59.179Z,1520534399.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:59.194Z,1520534399.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:59.577Z,1520534399.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:39:59.605Z,1520534399.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:39:59.985Z,1520534399.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:00.006Z,1520534400.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:00.386Z,1520534400.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:00.401Z,1520534400.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:00.777Z,1520534400.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:00.792Z,1520534400.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:01.180Z,1520534401.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:01.196Z,1520534401.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:01.585Z,1520534401.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:01.600Z,1520534401.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:01.982Z,1520534401.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:02.014Z,1520534402.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:02.390Z,1520534402.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:02.411Z,1520534402.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:02.781Z,1520534402.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:02.796Z,1520534402.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:03.173Z,1520534403.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:03.204Z,1520534403.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:03.589Z,1520534403.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:03.610Z,1520534403.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:03.989Z,1520534403.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:04.004Z,1520534404.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:04.389Z,1520534404.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:04.405Z,1520534404.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:04.780Z,1520534404.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:04.799Z,1520534404.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:05.175Z,1520534405.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:05.191Z,1520534405.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:05.585Z,1520534405.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:05.607Z,1520534405.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:05.988Z,1520534405.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:06.003Z,1520534406.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:06.389Z,1520534406.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:06.411Z,1520534406.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:06.773Z,1520534406.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:06.791Z,1520534406.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:07.175Z,1520534407.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:07.195Z,1520534407.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:07.589Z,1520534407.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:07.604Z,1520534407.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:07.984Z,1520534407.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:08.000Z,1520534408.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:08.385Z,1520534408.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:08.407Z,1520534408.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:08.780Z,1520534408.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:08.795Z,1520534408.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:09.164Z,1520534409.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:09.206Z,1520534409.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:09.588Z,1520534409.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:09.604Z,1520534409.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:09.990Z,1520534409.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:10.005Z,1520534410.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:10.388Z,1520534410.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:10.404Z,1520534410.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:10.780Z,1520534410.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:10.795Z,1520534410.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:11.175Z,1520534411.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:11.190Z,1520534411.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:11.578Z,1520534411.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:11.605Z,1520534411.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:11.993Z,1520534411.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:12.008Z,1520534412.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:12.390Z,1520534412.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:12.405Z,1520534412.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:12.780Z,1520534412.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:12.796Z,1520534412.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:13.166Z,1520534413.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:13.199Z,1520534413.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:13.590Z,1520534413.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:13.605Z,1520534413.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:13.985Z,1520534413.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:14.003Z,1520534414.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:14.389Z,1520534414.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:14.404Z,1520534414.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:14.768Z,1520534414.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:14.794Z,1520534414.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:15.167Z,1520534415.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:15.194Z,1520534415.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:15.585Z,1520534415.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:15.606Z,1520534415.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:15.993Z,1520534415.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:16.015Z,1520534416.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:16.385Z,1520534416.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:16.401Z,1520534416.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:16.767Z,1520534416.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:16.803Z,1520534416.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:17.180Z,1520534417.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:17.202Z,1520534417.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:17.586Z,1520534417.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:17.603Z,1520534417.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:17.989Z,1520534417.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:18.004Z,1520534418.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:18.390Z,1520534418.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:18.406Z,1520534418.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:18.780Z,1520534418.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:18.795Z,1520534418.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:19.166Z,1520534419.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:19.199Z,1520534419.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:19.590Z,1520534419.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:19.605Z,1520534419.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:19.985Z,1520534419.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:20.006Z,1520534420.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:20.385Z,1520534420.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:20.406Z,1520534420.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:20.780Z,1520534420.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:20.796Z,1520534420.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:21.167Z,1520534421.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:21.203Z,1520534421.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:21.582Z,1520534421.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:21.609Z,1520534421.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:21.999Z,1520534421.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:22.014Z,1520534422.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:22.377Z,1520534422.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:22.409Z,1520534422.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:22.775Z,1520534422.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:22.791Z,1520534422.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:23.168Z,1520534423.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:23.190Z,1520534423.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:23.585Z,1520534423.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:23.617Z,1520534423.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:23.989Z,1520534423.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:24.004Z,1520534424.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:24.381Z,1520534424.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:24.397Z,1520534424.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:24.779Z,1520534424.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:24.798Z,1520534424.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:25.179Z,1520534425.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:25.194Z,1520534425.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:25.585Z,1520534425.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:25.601Z,1520534425.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:25.985Z,1520534425.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:26.001Z,1520534426.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:26.382Z,1520534426.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:26.398Z,1520534426.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:26.780Z,1520534426.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:26.795Z,1520534426.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:27.178Z,1520534427.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:27.193Z,1520534427.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:27.581Z,1520534427.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:27.597Z,1520534427.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:27.985Z,1520534427.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:28.000Z,1520534428.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:28.381Z,1520534428.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:28.398Z,1520534428.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:28.777Z,1520534428.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:28.792Z,1520534428.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:29.179Z,1520534429.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:29.195Z,1520534429.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:29.580Z,1520534429.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:29.596Z,1520534429.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:29.981Z,1520534429.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:29.996Z,1520534429.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:30.381Z,1520534430.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:30.397Z,1520534430.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:30.774Z,1520534430.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:30.797Z,1520534430.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:31.181Z,1520534431.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:31.196Z,1520534431.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:31.584Z,1520534431.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:31.604Z,1520534431.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:31.989Z,1520534431.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:32.004Z,1520534432.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:32.387Z,1520534432.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:32.402Z,1520534432.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:32.775Z,1520534432.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:32.797Z,1520534432.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:33.163Z,1520534433.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:33.199Z,1520534433.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:33.590Z,1520534433.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:33.605Z,1520534433.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:33.991Z,1520534433.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:34.007Z,1520534434.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:34.389Z,1520534434.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:34.404Z,1520534434.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:34.766Z,1520534434.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:34.801Z,1520534434.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:35.163Z,1520534435.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:35.195Z,1520534435.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:35.581Z,1520534435.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:35.597Z,1520534435.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:35.988Z,1520534435.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:36.019Z,1520534436.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:36.389Z,1520534436.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:36.405Z,1520534436.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:36.763Z,1520534436.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:36.798Z,1520534436.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:37.166Z,1520534437.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:37.207Z,1520534437.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:37.590Z,1520534437.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:37.605Z,1520534437.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:37.989Z,1520534437.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:38.007Z,1520534438.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:38.390Z,1520534438.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:38.405Z,1520534438.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:38.769Z,1520534438.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:38.797Z,1520534438.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:39.163Z,1520534439.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:39.195Z,1520534439.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:39.586Z,1520534439.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:39.601Z,1520534439.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:39.986Z,1520534439.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:40.001Z,1520534440.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:40.390Z,1520534440.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:40.406Z,1520534440.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:40.768Z,1520534440.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:40.807Z,1520534440.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:41.170Z,1520534441.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:41.199Z,1520534441.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:41.590Z,1520534441.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:41.605Z,1520534441.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:41.987Z,1520534441.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:42.021Z,1520534442.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:42.390Z,1520534442.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:42.405Z,1520534442.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:42.771Z,1520534442.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:42.799Z,1520534442.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:43.166Z,1520534443.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:43.209Z,1520534443.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:43.591Z,1520534443.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:43.607Z,1520534443.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:43.992Z,1520534443.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:44.015Z,1520534444.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:44.377Z,1520534444.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:44.403Z,1520534444.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:44.767Z,1520534444.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:44.803Z,1520534444.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:45.171Z,1520534445.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:45.206Z,1520534445.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:45.581Z,1520534445.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:45.608Z,1520534445.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:45.981Z,1520534445.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:46.008Z,1520534446.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:46.381Z,1520534446.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:46.408Z,1520534446.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:46.767Z,1520534446.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:46.803Z,1520534446.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:47.170Z,1520534447.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:47.185Z,1520534447.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:47.586Z,1520534447.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:47.611Z,1520534447.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:47.989Z,1520534447.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:48.018Z,1520534448.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:48.385Z,1520534448.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:48.409Z,1520534448.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:48.770Z,1520534448.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:48.790Z,1520534448.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:49.167Z,1520534449.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:49.190Z,1520534449.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:49.585Z,1520534449.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:49.623Z,1520534449.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:49.985Z,1520534449.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:50.000Z,1520534450.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:50.381Z,1520534450.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:50.396Z,1520534450.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:50.776Z,1520534450.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:50.791Z,1520534450.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:51.176Z,1520534451.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:51.191Z,1520534451.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:51.589Z,1520534451.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:51.625Z,1520534451.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:51.985Z,1520534451.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:51.000Z,1520534452.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:52.003Z,1520534452.003 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T18:40:52.003Z,1520534452.003 [Default:CheckIn:C.Wait] Stopped
2018-03-08T18:40:52.003Z,1520534452.003 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T18:40:52.003Z,1520534452.003 [Default:CheckIn:D] Running Loop=1
2018-03-08T18:40:52.385Z,1520534452.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:52.407Z,1520534452.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:52.432Z,1520534452.432 [Default:CheckIn:D] Stopped
2018-03-08T18:40:52.432Z,1520534452.432 [Default:CheckIn:E] Running Loop=1
2018-03-08T18:40:52.773Z,1520534452.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:52.792Z,1520534452.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:52.796Z,1520534452.796 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 655.127083 min 
2018-03-08T18:40:52.796Z,1520534452.796 [Default:CheckIn:E] Stopped
2018-03-08T18:40:52.796Z,1520534452.796 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T18:40:52.796Z,1520534452.796 [Default:CheckIn] Stopped
2018-03-08T18:40:52.796Z,1520534452.796 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T18:40:52.797Z,1520534452.797 [Default:CheckIn](INFO): Running loop #64
2018-03-08T18:40:52.797Z,1520534452.797 [Default:CheckIn] Running Loop=64
2018-03-08T18:40:52.797Z,1520534452.797 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T18:40:52.797Z,1520534452.797 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T18:40:55.881Z,1520534455.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:55.897Z,1520534455.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:56.014Z,1520534456.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:56.055Z,1520534456.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:56.372Z,1520534456.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:56.394Z,1520534456.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:56.760Z,1520534456.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:56.784Z,1520534456.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:57.151Z,1520534457.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:57.187Z,1520534457.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:57.550Z,1520534457.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:57.584Z,1520534457.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:57.948Z,1520534457.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:57.963Z,1520534457.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:58.351Z,1520534458.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:58.384Z,1520534458.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:58.761Z,1520534458.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:58.783Z,1520534458.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:59.172Z,1520534459.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:59.188Z,1520534459.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:59.561Z,1520534459.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:59.590Z,1520534459.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:40:59.951Z,1520534459.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:40:59.982Z,1520534459.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:00.346Z,1520534460.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:00.361Z,1520534460.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:00.751Z,1520534460.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:00.767Z,1520534460.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:01.151Z,1520534461.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:01.170Z,1520534461.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:01.565Z,1520534461.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:01.597Z,1520534461.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:01.966Z,1520534461.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:01.995Z,1520534461.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:02.357Z,1520534462.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:02.373Z,1520534462.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:02.752Z,1520534462.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:02.768Z,1520534462.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:03.148Z,1520534463.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:03.163Z,1520534463.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:03.565Z,1520534463.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:03.595Z,1520534463.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:03.961Z,1520534463.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:03.976Z,1520534463.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:04.365Z,1520534464.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:04.397Z,1520534464.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:04.756Z,1520534464.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:04.771Z,1520534464.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:05.155Z,1520534465.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:05.170Z,1520534465.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:05.557Z,1520534465.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:05.573Z,1520534465.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:05.957Z,1520534465.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:05.972Z,1520534465.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:06.358Z,1520534466.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:06.373Z,1520534466.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:06.755Z,1520534466.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:06.771Z,1520534466.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:07.156Z,1520534467.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:07.171Z,1520534467.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:07.558Z,1520534467.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:07.573Z,1520534467.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:07.953Z,1520534467.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:07.977Z,1520534467.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:08.361Z,1520534468.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:08.376Z,1520534468.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:08.758Z,1520534468.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:08.773Z,1520534468.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:09.144Z,1520534469.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:09.174Z,1520534469.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:09.561Z,1520534469.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:09.576Z,1520534469.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:09.961Z,1520534469.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:09.976Z,1520534469.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:10.361Z,1520534470.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:10.377Z,1520534470.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:10.755Z,1520534470.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:10.778Z,1520534470.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:11.156Z,1520534471.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:11.172Z,1520534471.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:11.560Z,1520534471.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:11.579Z,1520534471.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:11.961Z,1520534471.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:11.977Z,1520534471.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:12.361Z,1520534472.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:12.376Z,1520534472.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:12.748Z,1520534472.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:12.770Z,1520534472.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:13.151Z,1520534473.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:13.166Z,1520534473.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:13.561Z,1520534473.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:13.582Z,1520534473.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:13.956Z,1520534473.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:13.972Z,1520534473.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:14.361Z,1520534474.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:14.376Z,1520534474.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:14.757Z,1520534474.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:14.772Z,1520534474.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:15.145Z,1520534475.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:15.172Z,1520534475.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:15.565Z,1520534475.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:15.586Z,1520534475.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:15.965Z,1520534475.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:15.980Z,1520534475.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:16.366Z,1520534476.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:16.386Z,1520534476.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:16.756Z,1520534476.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:16.771Z,1520534476.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:17.160Z,1520534477.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:17.182Z,1520534477.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:17.561Z,1520534477.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:17.582Z,1520534477.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:17.964Z,1520534477.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:17.979Z,1520534477.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:18.365Z,1520534478.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:18.380Z,1520534478.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:18.756Z,1520534478.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:18.771Z,1520534478.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:19.147Z,1520534479.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:19.170Z,1520534479.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:19.565Z,1520534479.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:19.587Z,1520534479.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:19.958Z,1520534479.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:19.973Z,1520534479.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:20.361Z,1520534480.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:20.382Z,1520534480.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:20.752Z,1520534480.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:20.767Z,1520534480.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:21.140Z,1520534481.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:21.175Z,1520534481.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:21.561Z,1520534481.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:21.582Z,1520534481.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:21.969Z,1520534481.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:21.984Z,1520534481.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:22.365Z,1520534482.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:22.380Z,1520534482.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:22.743Z,1520534482.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:22.775Z,1520534482.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:23.146Z,1520534483.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:23.174Z,1520534483.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:23.561Z,1520534483.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:23.577Z,1520534483.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:23.966Z,1520534483.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:23.981Z,1520534483.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:24.366Z,1520534484.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:24.380Z,1520534484.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:24.747Z,1520534484.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:24.774Z,1520534484.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:25.142Z,1520534485.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:25.177Z,1520534485.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:25.565Z,1520534485.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:25.581Z,1520534485.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:25.959Z,1520534485.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:25.992Z,1520534485.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:26.365Z,1520534486.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:26.380Z,1520534486.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:26.744Z,1520534486.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:26.772Z,1520534486.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:27.140Z,1520534487.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:27.174Z,1520534487.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:27.561Z,1520534487.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:27.577Z,1520534487.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:27.966Z,1520534487.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:27.981Z,1520534487.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:28.365Z,1520534488.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:28.380Z,1520534488.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:28.744Z,1520534488.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:28.775Z,1520534488.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:29.143Z,1520534489.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:29.171Z,1520534489.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:29.565Z,1520534489.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:29.586Z,1520534489.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:29.969Z,1520534489.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:29.990Z,1520534489.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:30.365Z,1520534490.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:30.380Z,1520534490.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:30.746Z,1520534490.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:30.778Z,1520534490.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:31.142Z,1520534491.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:31.169Z,1520534491.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:31.566Z,1520534491.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:31.581Z,1520534491.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:31.960Z,1520534491.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:31.983Z,1520534491.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:32.361Z,1520534492.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:32.377Z,1520534492.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:32.743Z,1520534492.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:32.770Z,1520534492.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:33.140Z,1520534493.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:33.171Z,1520534493.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:33.563Z,1520534493.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:33.578Z,1520534493.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:33.970Z,1520534493.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:33.990Z,1520534493.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:34.361Z,1520534494.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:34.377Z,1520534494.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:34.743Z,1520534494.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:34.775Z,1520534494.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:35.146Z,1520534495.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:35.174Z,1520534495.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:35.566Z,1520534495.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:35.582Z,1520534495.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:35.963Z,1520534495.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:35.983Z,1520534495.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:36.360Z,1520534496.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:36.393Z,1520534496.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:36.747Z,1520534496.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:36.774Z,1520534496.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:37.143Z,1520534497.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:37.174Z,1520534497.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:37.566Z,1520534497.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:37.581Z,1520534497.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:37.961Z,1520534497.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:37.977Z,1520534497.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:38.357Z,1520534498.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:38.389Z,1520534498.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:38.751Z,1520534498.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:38.782Z,1520534498.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:39.139Z,1520534499.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:39.167Z,1520534499.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:39.565Z,1520534499.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:39.587Z,1520534499.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:39.961Z,1520534499.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:39.988Z,1520534499.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:40.366Z,1520534500.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:40.395Z,1520534500.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:40.748Z,1520534500.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:40.763Z,1520534500.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:41.152Z,1520534501.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:41.167Z,1520534501.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:41.565Z,1520534501.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:41.595Z,1520534501.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:41.961Z,1520534501.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:41.976Z,1520534501.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:42.365Z,1520534502.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:42.380Z,1520534502.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:42.752Z,1520534502.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:42.767Z,1520534502.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:43.151Z,1520534503.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:43.167Z,1520534503.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:43.565Z,1520534503.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:43.580Z,1520534503.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:43.953Z,1520534503.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:43.969Z,1520534503.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:44.353Z,1520534504.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:44.369Z,1520534504.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:44.752Z,1520534504.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:44.767Z,1520534504.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:45.144Z,1520534505.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:45.167Z,1520534505.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:45.557Z,1520534505.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:45.573Z,1520534505.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:45.961Z,1520534505.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:45.976Z,1520534505.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:46.357Z,1520534506.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:46.373Z,1520534506.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:46.756Z,1520534506.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:46.771Z,1520534506.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:47.153Z,1520534507.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:47.168Z,1520534507.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:47.558Z,1520534507.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:47.573Z,1520534507.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:47.962Z,1520534507.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:47.977Z,1520534507.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:48.358Z,1520534508.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:48.373Z,1520534508.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:48.744Z,1520534508.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:48.775Z,1520534508.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:49.155Z,1520534509.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:49.174Z,1520534509.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:49.561Z,1520534509.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:49.576Z,1520534509.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:49.962Z,1520534509.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:49.977Z,1520534509.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:50.361Z,1520534510.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:50.382Z,1520534510.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:50.757Z,1520534510.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:50.772Z,1520534510.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:51.144Z,1520534511.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:51.171Z,1520534511.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:51.565Z,1520534511.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:51.583Z,1520534511.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:51.965Z,1520534511.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:51.980Z,1520534511.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:52.360Z,1520534512.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:52.382Z,1520534512.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:52.758Z,1520534512.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:52.773Z,1520534512.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:53.152Z,1520534513.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:53.167Z,1520534513.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:56.266Z,1520534516.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:56.282Z,1520534516.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:56.390Z,1520534516.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:56.430Z,1520534516.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:56.775Z,1520534516.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:56.790Z,1520534516.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:57.163Z,1520534517.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:57.179Z,1520534517.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:57.567Z,1520534517.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:57.583Z,1520534517.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:57.596Z,1520534517.596 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T18:41:57.964Z,1520534517.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:57.979Z,1520534517.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:58.363Z,1520534518.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:58.378Z,1520534518.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:58.769Z,1520534518.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:58.791Z,1520534518.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:59.172Z,1520534519.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:59.187Z,1520534519.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:59.573Z,1520534519.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:59.588Z,1520534519.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:41:59.962Z,1520534519.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:41:59.982Z,1520534519.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:00.360Z,1520534520.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:00.375Z,1520534520.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:00.764Z,1520534520.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:00.779Z,1520534520.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:01.158Z,1520534521.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:01.178Z,1520534521.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:01.573Z,1520534521.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:01.589Z,1520534521.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:01.968Z,1520534521.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:01.983Z,1520534521.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:02.376Z,1520534522.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:02.391Z,1520534522.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:02.751Z,1520534522.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:02.778Z,1520534522.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:03.148Z,1520534523.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:03.182Z,1520534523.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:03.569Z,1520534523.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:03.585Z,1520534523.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:03.967Z,1520534523.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:03.993Z,1520534523.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:04.374Z,1520534524.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:04.389Z,1520534524.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:04.751Z,1520534524.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:04.787Z,1520534524.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:05.154Z,1520534525.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:05.182Z,1520534525.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:05.574Z,1520534525.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:05.589Z,1520534525.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:05.977Z,1520534525.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:05.992Z,1520534525.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:06.371Z,1520534526.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:06.387Z,1520534526.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:06.751Z,1520534526.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:06.787Z,1520534526.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:07.153Z,1520534527.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:07.189Z,1520534527.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:07.569Z,1520534527.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:07.602Z,1520534527.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:07.961Z,1520534527.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:07.992Z,1520534527.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:08.369Z,1520534528.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:08.394Z,1520534528.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:08.758Z,1520534528.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:08.800Z,1520534528.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:09.147Z,1520534529.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:09.163Z,1520534529.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:09.569Z,1520534529.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:09.593Z,1520534529.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:09.969Z,1520534529.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:09.993Z,1520534529.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:10.369Z,1520534530.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:10.393Z,1520534530.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:10.756Z,1520534530.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:10.771Z,1520534530.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:11.159Z,1520534531.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:11.175Z,1520534531.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:11.565Z,1520534531.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:11.601Z,1520534531.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:11.973Z,1520534531.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:11.998Z,1520534531.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:12.369Z,1520534532.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:12.405Z,1520534532.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:12.760Z,1520534532.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:12.775Z,1520534532.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:13.159Z,1520534533.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:13.175Z,1520534533.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:13.573Z,1520534533.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:13.605Z,1520534533.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:13.962Z,1520534533.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:13.977Z,1520534533.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:14.361Z,1520534534.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:14.377Z,1520534534.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:14.761Z,1520534534.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:14.777Z,1520534534.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:15.158Z,1520534535.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:15.173Z,1520534535.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:15.573Z,1520534535.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:15.588Z,1520534535.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:15.966Z,1520534535.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:15.981Z,1520534535.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:16.366Z,1520534536.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:16.381Z,1520534536.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:16.763Z,1520534536.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:16.779Z,1520534536.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:17.163Z,1520534537.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:17.178Z,1520534537.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:17.565Z,1520534537.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:17.581Z,1520534537.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:17.969Z,1520534537.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:17.984Z,1520534537.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:18.369Z,1520534538.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:18.385Z,1520534538.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:18.763Z,1520534538.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:18.778Z,1520534538.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:19.162Z,1520534539.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:19.183Z,1520534539.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:19.569Z,1520534539.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:19.585Z,1520534539.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:19.969Z,1520534539.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:19.984Z,1520534539.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:20.369Z,1520534540.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:20.384Z,1520534540.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:20.764Z,1520534540.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:20.780Z,1520534540.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:21.162Z,1520534541.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:21.178Z,1520534541.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:21.569Z,1520534541.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:21.585Z,1520534541.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:21.969Z,1520534541.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:21.985Z,1520534541.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:22.368Z,1520534542.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:22.383Z,1520534542.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:22.761Z,1520534542.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:22.776Z,1520534542.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:23.160Z,1520534543.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:23.176Z,1520534543.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:23.568Z,1520534543.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:23.596Z,1520534543.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:23.969Z,1520534543.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:23.984Z,1520534543.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:24.370Z,1520534544.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:24.390Z,1520534544.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:24.764Z,1520534544.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:24.779Z,1520534544.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:25.159Z,1520534545.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:25.189Z,1520534545.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:25.570Z,1520534545.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:25.585Z,1520534545.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:25.969Z,1520534545.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:25.984Z,1520534545.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:26.369Z,1520534546.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:26.385Z,1520534546.385 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:26.385Z,1520534546.385 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 219
2018-03-08T18:42:26.385Z,1520534546.385 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T18:42:26.387Z,1520534546.387 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:26.387Z,1520534546.387 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 219
2018-03-08T18:42:26.387Z,1520534546.387 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T18:42:26.389Z,1520534546.389 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:26.389Z,1520534546.389 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 219
2018-03-08T18:42:26.389Z,1520534546.389 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T18:42:26.425Z,1520534546.425 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T18:42:26.425Z,1520534546.425 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T18:42:26.425Z,1520534546.425 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T18:42:26.750Z,1520534546.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:26.805Z,1520534546.805 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T18:42:26.805Z,1520534546.805 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 219
2018-03-08T18:42:26.805Z,1520534546.805 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T18:42:26.806Z,1520534546.806 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 219
2018-03-08T18:42:26.806Z,1520534546.806 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T18:42:26.806Z,1520534546.806 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 219
2018-03-08T18:42:27.151Z,1520534547.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:27.186Z,1520534547.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T18:42:27.186Z,1520534547.186 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:42:27.186Z,1520534547.186 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:42:27.187Z,1520534547.187 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T18:42:27.187Z,1520534547.187 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:42:27.187Z,1520534547.187 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:42:27.188Z,1520534547.188 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T18:42:27.188Z,1520534547.188 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:42:27.193Z,1520534547.193 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:42:27.561Z,1520534547.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:27.591Z,1520534547.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T18:42:27.592Z,1520534547.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:27.965Z,1520534547.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:27.997Z,1520534547.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T18:42:27.998Z,1520534547.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:28.369Z,1520534548.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:28.394Z,1520534548.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T18:42:28.395Z,1520534548.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:28.756Z,1520534548.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:28.771Z,1520534548.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T18:42:28.772Z,1520534548.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:29.158Z,1520534549.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:29.173Z,1520534549.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T18:42:29.174Z,1520534549.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:29.573Z,1520534549.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:29.604Z,1520534549.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T18:42:29.606Z,1520534549.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:29.977Z,1520534549.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:30.002Z,1520534550.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T18:42:30.003Z,1520534550.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:30.362Z,1520534550.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:30.382Z,1520534550.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T18:42:30.383Z,1520534550.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:30.756Z,1520534550.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:30.771Z,1520534550.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T18:42:30.772Z,1520534550.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:31.154Z,1520534551.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:31.173Z,1520534551.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T18:42:31.174Z,1520534551.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:31.565Z,1520534551.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:31.580Z,1520534551.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T18:42:31.581Z,1520534551.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:31.969Z,1520534551.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:31.984Z,1520534551.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T18:42:31.985Z,1520534551.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:32.378Z,1520534552.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:32.407Z,1520534552.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T18:42:32.408Z,1520534552.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:32.761Z,1520534552.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:32.776Z,1520534552.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T18:42:32.777Z,1520534552.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:33.164Z,1520534553.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:33.179Z,1520534553.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T18:42:33.180Z,1520534553.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:33.565Z,1520534553.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:33.580Z,1520534553.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T18:42:33.581Z,1520534553.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:33.969Z,1520534553.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:33.983Z,1520534553.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T18:42:33.984Z,1520534553.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:34.366Z,1520534554.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:34.381Z,1520534554.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T18:42:34.382Z,1520534554.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:34.763Z,1520534554.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:34.782Z,1520534554.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T18:42:34.783Z,1520534554.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:35.163Z,1520534555.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:35.178Z,1520534555.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T18:42:35.179Z,1520534555.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:35.566Z,1520534555.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:35.581Z,1520534555.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T18:42:35.582Z,1520534555.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:35.974Z,1520534555.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:36.057Z,1520534556.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-08T18:42:36.058Z,1520534556.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:36.369Z,1520534556.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:36.384Z,1520534556.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T18:42:36.385Z,1520534556.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:36.764Z,1520534556.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:36.779Z,1520534556.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T18:42:36.780Z,1520534556.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:37.158Z,1520534557.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:37.174Z,1520534557.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T18:42:37.175Z,1520534557.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:37.568Z,1520534557.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:37.583Z,1520534557.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T18:42:37.585Z,1520534557.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:37.969Z,1520534557.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:37.984Z,1520534557.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T18:42:37.985Z,1520534557.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:38.368Z,1520534558.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:38.390Z,1520534558.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T18:42:38.391Z,1520534558.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:38.764Z,1520534558.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:38.779Z,1520534558.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T18:42:38.780Z,1520534558.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:39.163Z,1520534559.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:39.182Z,1520534559.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T18:42:39.183Z,1520534559.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:39.568Z,1520534559.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:39.590Z,1520534559.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T18:42:39.591Z,1520534559.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:39.973Z,1520534559.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:39.987Z,1520534559.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T18:42:39.988Z,1520534559.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:40.372Z,1520534560.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:40.387Z,1520534560.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T18:42:40.388Z,1520534560.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:40.760Z,1520534560.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:40.774Z,1520534560.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T18:42:40.775Z,1520534560.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:41.159Z,1520534561.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:41.174Z,1520534561.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T18:42:41.175Z,1520534561.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:41.572Z,1520534561.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:41.587Z,1520534561.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T18:42:41.588Z,1520534561.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:41.973Z,1520534561.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:41.987Z,1520534561.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T18:42:41.989Z,1520534561.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:42.373Z,1520534562.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:42.394Z,1520534562.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T18:42:42.395Z,1520534562.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:42.764Z,1520534562.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:42.779Z,1520534562.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T18:42:42.780Z,1520534562.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:43.162Z,1520534563.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:43.182Z,1520534563.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T18:42:43.183Z,1520534563.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:43.573Z,1520534563.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:43.594Z,1520534563.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T18:42:43.595Z,1520534563.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:43.972Z,1520534563.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:43.994Z,1520534563.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T18:42:43.995Z,1520534563.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:44.372Z,1520534564.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:44.387Z,1520534564.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T18:42:44.388Z,1520534564.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:44.761Z,1520534564.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:44.776Z,1520534564.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T18:42:44.777Z,1520534564.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:45.159Z,1520534565.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:45.178Z,1520534565.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T18:42:45.179Z,1520534565.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:45.569Z,1520534565.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:45.584Z,1520534565.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T18:42:45.585Z,1520534565.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:45.972Z,1520534565.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:45.987Z,1520534565.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T18:42:45.988Z,1520534565.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:46.372Z,1520534566.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:46.388Z,1520534566.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:46.765Z,1520534566.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:46.780Z,1520534566.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:47.159Z,1520534567.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:47.178Z,1520534567.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:47.573Z,1520534567.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:47.588Z,1520534567.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:47.972Z,1520534567.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:47.987Z,1520534567.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:48.372Z,1520534568.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:48.387Z,1520534568.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:48.763Z,1520534568.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:48.780Z,1520534568.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:49.155Z,1520534569.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:49.177Z,1520534569.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:49.573Z,1520534569.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:49.588Z,1520534569.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:49.972Z,1520534569.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:49.987Z,1520534569.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:50.372Z,1520534570.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:50.387Z,1520534570.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:50.760Z,1520534570.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:50.775Z,1520534570.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:51.163Z,1520534571.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:51.178Z,1520534571.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:51.570Z,1520534571.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:51.585Z,1520534571.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:51.972Z,1520534571.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:51.987Z,1520534571.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:52.373Z,1520534572.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:52.388Z,1520534572.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:52.764Z,1520534572.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:52.786Z,1520534572.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:53.163Z,1520534573.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:53.185Z,1520534573.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:56.270Z,1520534576.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:56.286Z,1520534576.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:56.401Z,1520534576.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:56.442Z,1520534576.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:56.749Z,1520534576.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:56.780Z,1520534576.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:57.139Z,1520534577.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:57.171Z,1520534577.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:57.539Z,1520534577.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:57.575Z,1520534577.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:57.938Z,1520534577.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:57.958Z,1520534577.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:58.337Z,1520534578.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:58.353Z,1520534578.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:58.737Z,1520534578.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:58.753Z,1520534578.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:59.149Z,1520534579.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:59.164Z,1520534579.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:59.553Z,1520534579.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:59.585Z,1520534579.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:42:59.944Z,1520534579.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:42:59.959Z,1520534579.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:00.340Z,1520534580.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:00.355Z,1520534580.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:00.745Z,1520534580.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:00.760Z,1520534580.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:01.131Z,1520534581.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:01.154Z,1520534581.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:01.545Z,1520534581.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:01.561Z,1520534581.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:01.949Z,1520534581.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:01.965Z,1520534581.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:02.346Z,1520534582.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:02.361Z,1520534582.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:02.733Z,1520534582.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:02.763Z,1520534582.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:03.144Z,1520534583.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:03.160Z,1520534583.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:03.549Z,1520534583.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:03.565Z,1520534583.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:03.953Z,1520534583.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:03.969Z,1520534583.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:04.354Z,1520534584.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:04.369Z,1520534584.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:04.744Z,1520534584.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:04.760Z,1520534584.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:05.139Z,1520534585.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:05.159Z,1520534585.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:05.553Z,1520534585.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:05.569Z,1520534585.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:05.953Z,1520534585.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:05.968Z,1520534585.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:06.353Z,1520534586.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:06.375Z,1520534586.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:06.744Z,1520534586.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:06.759Z,1520534586.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:07.143Z,1520534587.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:07.159Z,1520534587.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:07.553Z,1520534587.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:07.574Z,1520534587.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:07.955Z,1520534587.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:07.997Z,1520534587.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:08.350Z,1520534588.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:08.365Z,1520534588.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:08.739Z,1520534588.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:08.761Z,1520534588.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:09.140Z,1520534589.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:09.162Z,1520534589.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:09.553Z,1520534589.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:09.575Z,1520534589.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:09.952Z,1520534589.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:09.967Z,1520534589.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:10.353Z,1520534590.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:10.368Z,1520534590.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:10.743Z,1520534590.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:10.759Z,1520534590.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:11.139Z,1520534591.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:11.159Z,1520534591.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:11.550Z,1520534591.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:11.584Z,1520534591.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:11.952Z,1520534591.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:11.974Z,1520534591.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:12.352Z,1520534592.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:12.368Z,1520534592.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:12.743Z,1520534592.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:12.758Z,1520534592.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:13.131Z,1520534593.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:13.157Z,1520534593.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:13.550Z,1520534593.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:13.565Z,1520534593.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:13.948Z,1520534593.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:13.974Z,1520534593.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:14.353Z,1520534594.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:14.369Z,1520534594.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:14.743Z,1520534594.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:14.759Z,1520534594.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:15.127Z,1520534595.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:15.155Z,1520534595.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:15.554Z,1520534595.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:15.569Z,1520534595.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:15.951Z,1520534595.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:15.970Z,1520534595.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:16.354Z,1520534596.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:16.369Z,1520534596.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:16.743Z,1520534596.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:16.759Z,1520534596.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:17.131Z,1520534597.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:17.167Z,1520534597.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:17.554Z,1520534597.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:17.569Z,1520534597.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:17.956Z,1520534597.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:17.971Z,1520534597.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:18.353Z,1520534598.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:18.369Z,1520534598.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:18.731Z,1520534598.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:18.759Z,1520534598.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:19.143Z,1520534599.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:19.159Z,1520534599.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:19.549Z,1520534599.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:19.565Z,1520534599.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:19.954Z,1520534599.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:19.969Z,1520534599.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:20.354Z,1520534600.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:20.369Z,1520534600.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:20.731Z,1520534600.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:20.763Z,1520534600.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:21.131Z,1520534601.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:21.168Z,1520534601.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:21.553Z,1520534601.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:21.568Z,1520534601.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:21.953Z,1520534601.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:21.968Z,1520534601.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:22.353Z,1520534602.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:22.368Z,1520534602.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:22.744Z,1520534602.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:22.760Z,1520534602.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:23.132Z,1520534603.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:23.170Z,1520534603.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:23.553Z,1520534603.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:23.568Z,1520534603.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:23.956Z,1520534603.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:23.971Z,1520534603.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:24.353Z,1520534604.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:24.374Z,1520534604.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:24.744Z,1520534604.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:24.759Z,1520534604.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:25.143Z,1520534605.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:25.159Z,1520534605.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:25.549Z,1520534605.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:25.565Z,1520534605.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:25.957Z,1520534605.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:25.972Z,1520534605.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:26.353Z,1520534606.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:26.368Z,1520534606.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:26.743Z,1520534606.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:26.762Z,1520534606.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:27.127Z,1520534607.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:27.155Z,1520534607.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:27.553Z,1520534607.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:27.568Z,1520534607.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:27.953Z,1520534607.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:27.968Z,1520534607.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:28.347Z,1520534608.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:28.374Z,1520534608.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:28.744Z,1520534608.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:28.759Z,1520534608.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:29.131Z,1520534609.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:29.162Z,1520534609.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:29.553Z,1520534609.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:29.568Z,1520534609.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:29.957Z,1520534609.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:29.972Z,1520534609.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:30.353Z,1520534610.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:30.368Z,1520534610.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:30.731Z,1520534610.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:30.766Z,1520534610.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:31.143Z,1520534611.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:31.158Z,1520534611.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:31.549Z,1520534611.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:31.565Z,1520534611.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:31.954Z,1520534611.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:31.969Z,1520534611.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:32.353Z,1520534612.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:32.368Z,1520534612.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:32.732Z,1520534612.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:32.762Z,1520534612.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:33.127Z,1520534613.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:33.159Z,1520534613.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:33.518Z,1520534613.518 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T18:43:33.518Z,1520534613.518 [NAL9602] Data Fault, FailCount= 1
2018-03-08T18:43:33.518Z,1520534613.518 [NAL9602](ERROR): Data Fault
2018-03-08T18:43:33.554Z,1520534613.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:33.570Z,1520534613.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:33.583Z,1520534613.583 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T18:43:33.914Z,1520534613.914 [NAL9602](INFO): Powering down
2018-03-08T18:43:33.931Z,1520534613.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:33.971Z,1520534613.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:34.334Z,1520534614.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:34.361Z,1520534614.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:34.735Z,1520534614.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:34.762Z,1520534614.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:34.775Z,1520534614.775 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T18:43:34.775Z,1520534614.775 [NAL9602] No Fault, FailCount= 1
2018-03-08T18:43:35.150Z,1520534615.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:35.170Z,1520534615.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:35.534Z,1520534615.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:35.561Z,1520534615.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:35.934Z,1520534615.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:35.961Z,1520534615.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:36.330Z,1520534616.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:36.356Z,1520534616.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:36.729Z,1520534616.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:36.759Z,1520534616.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:37.135Z,1520534617.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:37.161Z,1520534617.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:37.534Z,1520534617.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:37.561Z,1520534617.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:37.929Z,1520534617.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:37.957Z,1520534617.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:38.334Z,1520534618.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:38.361Z,1520534618.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:38.731Z,1520534618.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:38.759Z,1520534618.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:39.135Z,1520534619.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:39.163Z,1520534619.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:39.530Z,1520534619.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:39.561Z,1520534619.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:39.935Z,1520534619.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:40.002Z,1520534620.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:40.335Z,1520534620.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:40.368Z,1520534620.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:40.724Z,1520534620.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:40.740Z,1520534620.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:41.130Z,1520534621.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:41.166Z,1520534621.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:41.538Z,1520534621.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:41.577Z,1520534621.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:41.928Z,1520534621.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:41.943Z,1520534621.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:42.339Z,1520534622.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:42.370Z,1520534622.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:42.731Z,1520534622.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:42.746Z,1520534622.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:43.131Z,1520534623.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:43.147Z,1520534623.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:43.539Z,1520534623.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:43.554Z,1520534623.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:43.938Z,1520534623.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:43.953Z,1520534623.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:44.341Z,1520534624.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:44.356Z,1520534624.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:44.736Z,1520534624.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:44.751Z,1520534624.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:45.136Z,1520534625.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:45.151Z,1520534625.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:45.534Z,1520534625.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:45.549Z,1520534625.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:45.936Z,1520534625.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:45.959Z,1520534625.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:46.332Z,1520534626.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:46.348Z,1520534626.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:46.724Z,1520534626.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:46.746Z,1520534626.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:47.132Z,1520534627.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:47.148Z,1520534627.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:47.531Z,1520534627.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:47.647Z,1520534627.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:47.924Z,1520534627.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:47.939Z,1520534627.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:48.332Z,1520534628.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:48.348Z,1520534628.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:48.728Z,1520534628.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:48.743Z,1520534628.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:49.125Z,1520534629.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:49.140Z,1520534629.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:49.530Z,1520534629.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:49.550Z,1520534629.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:49.934Z,1520534629.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:49.949Z,1520534629.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:50.341Z,1520534630.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:50.390Z,1520534630.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:50.732Z,1520534630.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:50.747Z,1520534630.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:51.132Z,1520534631.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:51.147Z,1520534631.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:51.531Z,1520534631.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:51.554Z,1520534631.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:51.931Z,1520534631.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:51.959Z,1520534631.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:52.330Z,1520534632.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:52.366Z,1520534632.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:52.728Z,1520534632.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:52.743Z,1520534632.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:53.131Z,1520534633.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:53.146Z,1520534633.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:53.538Z,1520534633.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:53.575Z,1520534633.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:56.636Z,1520534636.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:56.652Z,1520534636.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:56.748Z,1520534636.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:56.783Z,1520534636.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:57.129Z,1520534637.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:57.144Z,1520534637.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:57.526Z,1520534637.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:57.541Z,1520534637.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:57.931Z,1520534637.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:57.947Z,1520534637.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:58.330Z,1520534638.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:58.350Z,1520534638.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:58.728Z,1520534638.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:58.743Z,1520534638.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:59.137Z,1520534639.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:59.153Z,1520534639.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:59.535Z,1520534639.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:59.558Z,1520534639.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:43:59.920Z,1520534639.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:43:59.972Z,1520534639.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:00.328Z,1520534640.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:00.347Z,1520534640.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:00.730Z,1520534640.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:00.751Z,1520534640.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:01.116Z,1520534641.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:01.151Z,1520534641.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:01.535Z,1520534641.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:01.558Z,1520534641.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:01.930Z,1520534641.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:01.950Z,1520534641.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:02.334Z,1520534642.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:02.349Z,1520534642.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:02.734Z,1520534642.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:02.754Z,1520534642.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:03.131Z,1520534643.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:03.146Z,1520534643.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:03.535Z,1520534643.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:03.550Z,1520534643.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:03.934Z,1520534643.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:03.954Z,1520534643.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:04.306Z,1520534644.306 [NAL9602](INFO): Powering up NAL9602
2018-03-08T18:44:04.335Z,1520534644.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:04.350Z,1520534644.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:04.727Z,1520534644.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:04.742Z,1520534644.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:05.134Z,1520534645.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:05.154Z,1520534645.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:05.534Z,1520534645.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:05.554Z,1520534645.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:05.916Z,1520534645.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:05.950Z,1520534645.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:06.335Z,1520534646.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:06.354Z,1520534646.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:06.734Z,1520534646.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:06.754Z,1520534646.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:07.116Z,1520534647.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:07.151Z,1520534647.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:07.534Z,1520534647.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:07.554Z,1520534647.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:07.930Z,1520534647.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:07.945Z,1520534647.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:08.330Z,1520534648.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:08.356Z,1520534648.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:08.734Z,1520534648.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:08.754Z,1520534648.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:09.135Z,1520534649.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:09.154Z,1520534649.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:09.525Z,1520534649.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:09.552Z,1520534649.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:09.935Z,1520534649.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:09.958Z,1520534649.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:10.334Z,1520534650.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:10.358Z,1520534650.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:10.734Z,1520534650.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:10.749Z,1520534650.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:11.135Z,1520534651.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:11.154Z,1520534651.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:11.530Z,1520534651.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:11.546Z,1520534651.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:11.926Z,1520534651.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:11.941Z,1520534651.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:12.335Z,1520534652.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:12.350Z,1520534652.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:12.730Z,1520534652.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:12.751Z,1520534652.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:13.126Z,1520534653.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:13.152Z,1520534653.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:13.534Z,1520534653.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:13.555Z,1520534653.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:13.935Z,1520534653.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:13.954Z,1520534653.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:14.335Z,1520534654.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:14.350Z,1520534654.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:14.740Z,1520534654.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:14.756Z,1520534654.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:15.110Z,1520534655.110 [NAL9602](INFO): NAL9602 initialized
2018-03-08T18:44:15.139Z,1520534655.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:15.162Z,1520534655.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:15.535Z,1520534655.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:15.550Z,1520534655.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:15.946Z,1520534655.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:15.967Z,1520534655.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:16.345Z,1520534656.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:16.360Z,1520534656.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:16.745Z,1520534656.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:16.766Z,1520534656.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:17.117Z,1520534657.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:17.149Z,1520534657.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:17.537Z,1520534657.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:17.552Z,1520534657.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:17.924Z,1520534657.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:17.951Z,1520534657.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:18.347Z,1520534658.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:18.362Z,1520534658.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:18.746Z,1520534658.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:18.767Z,1520534658.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:19.147Z,1520534659.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:19.162Z,1520534659.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:19.537Z,1520534659.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:19.552Z,1520534659.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:19.923Z,1520534659.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:19.963Z,1520534659.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:20.327Z,1520534660.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:20.355Z,1520534660.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:20.717Z,1520534660.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:20.748Z,1520534660.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:21.146Z,1520534661.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:21.166Z,1520534661.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:21.545Z,1520534661.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:21.567Z,1520534661.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:21.933Z,1520534661.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:21.970Z,1520534661.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:22.324Z,1520534662.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:22.352Z,1520534662.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:22.727Z,1520534662.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:22.767Z,1520534662.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:23.133Z,1520534663.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:23.171Z,1520534663.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:23.538Z,1520534663.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:23.562Z,1520534663.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:23.941Z,1520534663.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:23.965Z,1520534663.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:24.331Z,1520534664.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:24.363Z,1520534664.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:24.728Z,1520534664.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:24.745Z,1520534664.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:25.141Z,1520534665.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:25.173Z,1520534665.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:25.545Z,1520534665.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:25.571Z,1520534665.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:25.941Z,1520534665.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:25.973Z,1520534665.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:26.331Z,1520534666.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:26.346Z,1520534666.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:26.728Z,1520534666.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:26.743Z,1520534666.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:27.145Z,1520534667.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:27.177Z,1520534667.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:27.541Z,1520534667.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:27.556Z,1520534667.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:27.933Z,1520534667.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:27.948Z,1520534667.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:28.330Z,1520534668.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:28.348Z,1520534668.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:28.731Z,1520534668.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:28.746Z,1520534668.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:29.137Z,1520534669.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:29.152Z,1520534669.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:29.542Z,1520534669.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:29.559Z,1520534669.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:29.937Z,1520534669.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:29.953Z,1520534669.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:30.336Z,1520534670.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:30.384Z,1520534670.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:30.731Z,1520534670.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:30.746Z,1520534670.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:31.137Z,1520534671.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:31.153Z,1520534671.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:31.542Z,1520534671.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:31.557Z,1520534671.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:31.937Z,1520534671.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:31.953Z,1520534671.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:32.332Z,1520534672.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:32.347Z,1520534672.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:32.729Z,1520534672.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:32.744Z,1520534672.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:33.137Z,1520534673.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:33.153Z,1520534673.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:33.541Z,1520534673.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:33.556Z,1520534673.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:33.937Z,1520534673.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:33.952Z,1520534673.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:34.335Z,1520534674.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:34.350Z,1520534674.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:34.730Z,1520534674.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:34.745Z,1520534674.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:35.137Z,1520534675.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:35.152Z,1520534675.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:35.541Z,1520534675.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:35.557Z,1520534675.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:35.936Z,1520534675.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:35.958Z,1520534675.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:36.335Z,1520534676.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:36.351Z,1520534676.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:36.734Z,1520534676.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:36.749Z,1520534676.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:37.137Z,1520534677.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:37.152Z,1520534677.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:37.541Z,1520534677.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:37.556Z,1520534677.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:37.937Z,1520534677.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:37.952Z,1520534677.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:38.331Z,1520534678.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:38.346Z,1520534678.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:38.729Z,1520534678.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:38.744Z,1520534678.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:39.137Z,1520534679.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:39.153Z,1520534679.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:39.541Z,1520534679.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:39.556Z,1520534679.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:39.937Z,1520534679.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:39.952Z,1520534679.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:40.331Z,1520534680.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:40.355Z,1520534680.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:40.734Z,1520534680.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:40.749Z,1520534680.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:41.138Z,1520534681.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:41.153Z,1520534681.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:41.537Z,1520534681.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:41.552Z,1520534681.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:41.936Z,1520534681.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:41.951Z,1520534681.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:42.335Z,1520534682.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:42.351Z,1520534682.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:42.731Z,1520534682.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:42.746Z,1520534682.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:43.137Z,1520534683.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:43.153Z,1520534683.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:43.541Z,1520534683.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:43.557Z,1520534683.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:43.937Z,1520534683.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:43.952Z,1520534683.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:44.334Z,1520534684.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:44.349Z,1520534684.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:44.729Z,1520534684.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:44.744Z,1520534684.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:45.134Z,1520534685.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:45.155Z,1520534685.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:45.544Z,1520534685.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:45.559Z,1520534685.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:45.937Z,1520534685.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:45.952Z,1520534685.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:46.335Z,1520534686.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:46.355Z,1520534686.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:46.733Z,1520534686.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:46.748Z,1520534686.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:47.137Z,1520534687.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:47.152Z,1520534687.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:47.541Z,1520534687.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:47.556Z,1520534687.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:47.938Z,1520534687.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:47.958Z,1520534687.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:48.329Z,1520534688.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:48.345Z,1520534688.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:48.734Z,1520534688.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:48.749Z,1520534688.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:49.137Z,1520534689.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:49.152Z,1520534689.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:49.541Z,1520534689.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:49.556Z,1520534689.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:49.941Z,1520534689.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:49.957Z,1520534689.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:50.334Z,1520534690.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:50.349Z,1520534690.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:50.730Z,1520534690.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:50.746Z,1520534690.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:51.137Z,1520534691.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:51.153Z,1520534691.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:51.540Z,1520534691.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:51.558Z,1520534691.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:51.941Z,1520534691.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:51.956Z,1520534691.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:52.331Z,1520534692.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:52.347Z,1520534692.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:52.729Z,1520534692.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:52.750Z,1520534692.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:53.138Z,1520534693.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:53.153Z,1520534693.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:53.541Z,1520534693.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:53.557Z,1520534693.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:53.941Z,1520534693.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:53.956Z,1520534693.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:57.030Z,1520534697.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:57.046Z,1520534697.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:57.141Z,1520534697.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:57.233Z,1520534697.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:57.514Z,1520534697.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:57.546Z,1520534697.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:57.926Z,1520534697.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:57.941Z,1520534697.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:58.313Z,1520534698.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:58.340Z,1520534698.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:58.703Z,1520534698.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:58.739Z,1520534698.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:59.103Z,1520534699.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:59.118Z,1520534699.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:59.504Z,1520534699.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:59.519Z,1520534699.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:44:59.904Z,1520534699.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:44:59.919Z,1520534699.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:00.314Z,1520534700.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:00.338Z,1520534700.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:00.706Z,1520534700.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:00.721Z,1520534700.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:01.118Z,1520534701.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:01.153Z,1520534701.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:01.506Z,1520534701.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:01.521Z,1520534701.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:01.900Z,1520534701.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:01.923Z,1520534701.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:02.307Z,1520534702.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:02.324Z,1520534702.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:02.706Z,1520534702.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:02.721Z,1520534702.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:03.108Z,1520534703.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:03.124Z,1520534703.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:03.513Z,1520534703.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:03.528Z,1520534703.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:03.909Z,1520534703.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:03.930Z,1520534703.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:04.305Z,1520534704.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:04.320Z,1520534704.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:04.703Z,1520534704.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:04.718Z,1520534704.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:05.110Z,1520534705.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:05.125Z,1520534705.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:05.513Z,1520534705.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:05.528Z,1520534705.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:05.908Z,1520534705.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:05.923Z,1520534705.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:06.307Z,1520534706.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:06.322Z,1520534706.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:06.700Z,1520534706.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:06.722Z,1520534706.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:07.110Z,1520534707.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:07.125Z,1520534707.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:07.513Z,1520534707.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:07.528Z,1520534707.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:07.905Z,1520534707.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:07.933Z,1520534707.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:08.307Z,1520534708.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:08.323Z,1520534708.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:08.707Z,1520534708.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:08.723Z,1520534708.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:09.112Z,1520534709.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:09.127Z,1520534709.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:09.513Z,1520534709.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:09.528Z,1520534709.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:09.914Z,1520534709.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:09.929Z,1520534709.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:10.308Z,1520534710.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:10.322Z,1520534710.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:10.703Z,1520534710.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:10.723Z,1520534710.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:11.116Z,1520534711.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:11.132Z,1520534711.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:11.516Z,1520534711.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:11.538Z,1520534711.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:11.917Z,1520534711.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:11.932Z,1520534711.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:12.308Z,1520534712.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:12.323Z,1520534712.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:12.692Z,1520534712.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:12.723Z,1520534712.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:13.113Z,1520534713.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:13.128Z,1520534713.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:13.516Z,1520534713.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:13.531Z,1520534713.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:13.912Z,1520534713.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:13.928Z,1520534713.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:14.303Z,1520534714.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:14.322Z,1520534714.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:14.704Z,1520534714.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:14.726Z,1520534714.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:15.106Z,1520534715.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:15.129Z,1520534715.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:15.517Z,1520534715.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:15.532Z,1520534715.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:15.918Z,1520534715.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:15.933Z,1520534715.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:16.308Z,1520534716.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:16.323Z,1520534716.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:16.696Z,1520534716.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:16.730Z,1520534716.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:17.118Z,1520534717.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:17.133Z,1520534717.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:17.520Z,1520534717.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:17.535Z,1520534717.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:17.913Z,1520534717.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:17.929Z,1520534717.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:18.308Z,1520534718.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:18.323Z,1520534718.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:18.692Z,1520534718.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:18.731Z,1520534718.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:19.117Z,1520534719.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:19.133Z,1520534719.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:19.521Z,1520534719.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:19.536Z,1520534719.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:19.905Z,1520534719.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:19.935Z,1520534719.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:20.307Z,1520534720.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:20.323Z,1520534720.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:20.694Z,1520534720.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:20.726Z,1520534720.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:21.104Z,1520534721.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:21.127Z,1520534721.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:21.521Z,1520534721.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:21.536Z,1520534721.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:21.918Z,1520534721.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:21.933Z,1520534721.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:22.308Z,1520534722.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:22.323Z,1520534722.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:22.695Z,1520534722.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:22.727Z,1520534722.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:23.118Z,1520534723.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:23.133Z,1520534723.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:23.521Z,1520534723.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:23.536Z,1520534723.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:23.913Z,1520534723.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:23.928Z,1520534723.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:24.308Z,1520534724.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:24.323Z,1520534724.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:24.692Z,1520534724.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:24.727Z,1520534724.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:25.117Z,1520534725.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:25.132Z,1520534725.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:25.520Z,1520534725.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:25.536Z,1520534725.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:25.905Z,1520534725.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:25.927Z,1520534725.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:26.309Z,1520534726.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:26.324Z,1520534726.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:26.695Z,1520534726.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:26.730Z,1520534726.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:27.114Z,1520534727.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:27.129Z,1520534727.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:27.520Z,1520534727.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:27.542Z,1520534727.542 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:27.543Z,1520534727.543 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 220
2018-03-08T18:45:27.543Z,1520534727.543 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T18:45:27.561Z,1520534727.561 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:27.561Z,1520534727.561 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 220
2018-03-08T18:45:27.561Z,1520534727.561 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T18:45:27.562Z,1520534727.562 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:27.563Z,1520534727.563 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 220
2018-03-08T18:45:27.563Z,1520534727.563 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T18:45:27.591Z,1520534727.591 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T18:45:27.591Z,1520534727.591 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T18:45:27.591Z,1520534727.591 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T18:45:27.918Z,1520534727.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:27.948Z,1520534727.948 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T18:45:27.948Z,1520534727.948 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 220
2018-03-08T18:45:27.977Z,1520534727.977 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T18:45:27.977Z,1520534727.977 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 220
2018-03-08T18:45:27.977Z,1520534727.977 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T18:45:27.977Z,1520534727.977 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 220
2018-03-08T18:45:28.299Z,1520534728.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:28.326Z,1520534728.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T18:45:28.326Z,1520534728.326 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:45:28.326Z,1520534728.326 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:45:28.327Z,1520534728.327 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T18:45:28.327Z,1520534728.327 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:45:28.328Z,1520534728.328 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:45:28.328Z,1520534728.328 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T18:45:28.328Z,1520534728.328 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:45:28.329Z,1520534728.329 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:45:28.694Z,1520534728.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:28.726Z,1520534728.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T18:45:28.727Z,1520534728.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:29.119Z,1520534729.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:29.147Z,1520534729.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T18:45:29.148Z,1520534729.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:29.514Z,1520534729.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:29.529Z,1520534729.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T18:45:29.530Z,1520534729.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:29.913Z,1520534729.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:29.928Z,1520534729.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T18:45:29.929Z,1520534729.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:30.295Z,1520534730.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:30.327Z,1520534730.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T18:45:30.328Z,1520534730.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:30.692Z,1520534730.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:30.723Z,1520534730.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T18:45:30.724Z,1520534730.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:31.118Z,1520534731.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:31.138Z,1520534731.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T18:45:31.139Z,1520534731.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:31.518Z,1520534731.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:31.533Z,1520534731.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T18:45:31.534Z,1520534731.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:31.901Z,1520534731.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:31.935Z,1520534731.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T18:45:31.936Z,1520534731.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:32.299Z,1520534732.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:32.330Z,1520534732.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T18:45:32.331Z,1520534732.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:32.695Z,1520534732.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:32.733Z,1520534732.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T18:45:32.734Z,1520534732.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:33.105Z,1520534733.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:33.142Z,1520534733.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T18:45:33.143Z,1520534733.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:33.513Z,1520534733.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:33.539Z,1520534733.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T18:45:33.540Z,1520534733.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:33.909Z,1520534733.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:33.937Z,1520534733.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T18:45:33.938Z,1520534733.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:34.307Z,1520534734.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:34.334Z,1520534734.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T18:45:34.335Z,1520534734.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:34.694Z,1520534734.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:34.730Z,1520534734.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T18:45:34.731Z,1520534734.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:35.119Z,1520534735.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:35.134Z,1520534735.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T18:45:35.135Z,1520534735.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:35.517Z,1520534735.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:35.537Z,1520534735.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T18:45:35.538Z,1520534735.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:35.917Z,1520534735.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:35.936Z,1520534735.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T18:45:35.937Z,1520534735.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:36.296Z,1520534736.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:36.334Z,1520534736.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T18:45:36.335Z,1520534736.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:36.693Z,1520534736.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:36.734Z,1520534736.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T18:45:36.735Z,1520534736.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:37.110Z,1520534737.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:37.135Z,1520534737.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T18:45:37.136Z,1520534737.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:37.520Z,1520534737.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:37.535Z,1520534737.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T18:45:37.535Z,1520534737.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:37.907Z,1520534737.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:37.938Z,1520534737.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T18:45:37.939Z,1520534737.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:38.308Z,1520534738.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:38.334Z,1520534738.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T18:45:38.335Z,1520534738.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:38.700Z,1520534738.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:38.735Z,1520534738.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T18:45:38.736Z,1520534738.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:39.105Z,1520534739.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:39.138Z,1520534739.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T18:45:39.139Z,1520534739.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:39.517Z,1520534739.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:39.550Z,1520534739.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T18:45:39.551Z,1520534739.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:39.912Z,1520534739.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:39.936Z,1520534739.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T18:45:39.949Z,1520534739.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:40.296Z,1520534740.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:40.311Z,1520534740.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T18:45:40.312Z,1520534740.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:40.702Z,1520534740.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:40.722Z,1520534740.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T18:45:40.723Z,1520534740.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:41.117Z,1520534741.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:41.150Z,1520534741.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T18:45:41.151Z,1520534741.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:41.517Z,1520534741.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:41.548Z,1520534741.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T18:45:41.549Z,1520534741.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:41.909Z,1520534741.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:41.924Z,1520534741.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T18:45:41.925Z,1520534741.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:42.304Z,1520534742.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:42.319Z,1520534742.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T18:45:42.320Z,1520534742.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:42.696Z,1520534742.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:42.730Z,1520534742.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T18:45:42.731Z,1520534742.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:43.117Z,1520534743.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:43.132Z,1520534743.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T18:45:43.149Z,1520534743.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:43.513Z,1520534743.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:43.527Z,1520534743.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T18:45:43.528Z,1520534743.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:43.908Z,1520534743.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:43.923Z,1520534743.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T18:45:43.924Z,1520534743.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:44.307Z,1520534744.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:44.326Z,1520534744.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T18:45:44.327Z,1520534744.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:44.706Z,1520534744.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:44.721Z,1520534744.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T18:45:44.722Z,1520534744.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:45.108Z,1520534745.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:45.123Z,1520534745.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T18:45:45.124Z,1520534745.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:45.521Z,1520534745.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:45.536Z,1520534745.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T18:45:45.553Z,1520534745.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:45.912Z,1520534745.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:45.927Z,1520534745.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T18:45:45.928Z,1520534745.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:46.305Z,1520534746.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:46.320Z,1520534746.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T18:45:46.321Z,1520534746.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:46.699Z,1520534746.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:46.729Z,1520534746.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T18:45:46.730Z,1520534746.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:47.113Z,1520534747.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:47.127Z,1520534747.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T18:45:47.128Z,1520534747.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:47.510Z,1520534747.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:47.525Z,1520534747.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T18:45:47.526Z,1520534747.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:47.912Z,1520534747.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:47.931Z,1520534747.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:48.308Z,1520534748.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:48.323Z,1520534748.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:48.700Z,1520534748.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:48.715Z,1520534748.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:49.112Z,1520534749.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:49.128Z,1520534749.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:49.514Z,1520534749.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:49.529Z,1520534749.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:49.908Z,1520534749.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:49.923Z,1520534749.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:50.307Z,1520534750.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:50.323Z,1520534750.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:50.707Z,1520534750.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:50.722Z,1520534750.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:51.112Z,1520534751.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:51.127Z,1520534751.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:51.517Z,1520534751.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:51.532Z,1520534751.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:51.912Z,1520534751.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:51.927Z,1520534751.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:52.308Z,1520534752.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:52.323Z,1520534752.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:52.703Z,1520534752.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:52.718Z,1520534752.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:53.113Z,1520534753.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:53.128Z,1520534753.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:53.131Z,1520534753.131 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T18:40:52.8Z
2018-03-08T18:45:53.131Z,1520534753.131 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T18:45:53.131Z,1520534753.131 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T18:45:53.512Z,1520534753.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:53.528Z,1520534753.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:54.014Z,1520534754.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:54.029Z,1520534754.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:54.307Z,1520534754.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:54.327Z,1520534754.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:57.426Z,1520534757.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:57.467Z,1520534757.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:57.542Z,1520534757.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:57.567Z,1520534757.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:57.897Z,1520534757.897 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0256.lzma
2018-03-08T18:45:57.937Z,1520534757.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:57.959Z,1520534757.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:58.333Z,1520534758.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:58.361Z,1520534758.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:58.695Z,1520534758.695 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0256.lzma.bak
2018-03-08T18:45:58.695Z,1520534758.695 [DataOverHttps](INFO): SBD MOMSN=7988185
2018-03-08T18:45:58.741Z,1520534758.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:58.770Z,1520534758.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:59.312Z,1520534759.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:59.328Z,1520534759.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:59.520Z,1520534759.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:59.535Z,1520534759.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:45:59.925Z,1520534759.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:45:59.965Z,1520534759.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:03.021Z,1520534763.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:03.037Z,1520534763.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:03.146Z,1520534763.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:03.190Z,1520534763.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:03.537Z,1520534763.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:03.568Z,1520534763.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:03.929Z,1520534763.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:04.017Z,1520534764.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:04.324Z,1520534764.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:04.339Z,1520534764.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:04.725Z,1520534764.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:04.740Z,1520534764.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:05.123Z,1520534765.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:05.139Z,1520534765.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:08.226Z,1520534768.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:08.247Z,1520534768.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:08.364Z,1520534768.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:08.398Z,1520534768.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:08.713Z,1520534768.713 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0257.lzma
2018-03-08T18:46:08.745Z,1520534768.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:08.775Z,1520534768.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:09.123Z,1520534769.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:09.151Z,1520534769.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:09.503Z,1520534769.503 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0257.lzma.bak
2018-03-08T18:46:09.504Z,1520534769.504 [DataOverHttps](INFO): SBD MOMSN=7988187
2018-03-08T18:46:09.540Z,1520534769.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:09.575Z,1520534769.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:10.120Z,1520534770.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:10.136Z,1520534770.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:10.139Z,1520534770.139 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T18:46:10.139Z,1520534770.139 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T18:46:10.139Z,1520534770.139 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T18:46:10.332Z,1520534770.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:10.347Z,1520534770.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:13.473Z,1520534773.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:13.490Z,1520534773.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:13.593Z,1520534773.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:13.624Z,1520534773.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:13.969Z,1520534773.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:14.042Z,1520534774.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:14.343Z,1520534774.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:14.381Z,1520534774.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:14.745Z,1520534774.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:14.778Z,1520534774.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:15.142Z,1520534775.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:15.174Z,1520534775.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:15.557Z,1520534775.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:15.583Z,1520534775.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:15.956Z,1520534775.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:15.986Z,1520534775.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:16.353Z,1520534776.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:16.377Z,1520534776.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:16.743Z,1520534776.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:16.759Z,1520534776.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:17.137Z,1520534777.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:17.152Z,1520534777.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:17.542Z,1520534777.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:17.558Z,1520534777.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:17.944Z,1520534777.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:17.959Z,1520534777.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:18.337Z,1520534778.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:18.353Z,1520534778.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:18.753Z,1520534778.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:18.789Z,1520534778.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:19.157Z,1520534779.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:19.190Z,1520534779.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:19.546Z,1520534779.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:19.561Z,1520534779.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:19.944Z,1520534779.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:19.960Z,1520534779.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:20.344Z,1520534780.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:20.360Z,1520534780.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:20.745Z,1520534780.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:20.766Z,1520534780.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:21.144Z,1520534781.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:21.163Z,1520534781.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:21.559Z,1520534781.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:21.594Z,1520534781.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:21.945Z,1520534781.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:21.961Z,1520534781.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:22.357Z,1520534782.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:22.389Z,1520534782.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:22.746Z,1520534782.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:22.761Z,1520534782.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:23.140Z,1520534783.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:23.159Z,1520534783.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:23.546Z,1520534783.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:23.561Z,1520534783.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:23.947Z,1520534783.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:23.962Z,1520534783.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:24.347Z,1520534784.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:24.363Z,1520534784.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:24.749Z,1520534784.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:24.765Z,1520534784.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:25.153Z,1520534785.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:25.168Z,1520534785.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:25.549Z,1520534785.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:25.570Z,1520534785.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:25.943Z,1520534785.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:25.958Z,1520534785.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:26.345Z,1520534786.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:26.361Z,1520534786.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:26.740Z,1520534786.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:26.759Z,1520534786.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:27.146Z,1520534787.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:27.162Z,1520534787.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:27.549Z,1520534787.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:27.564Z,1520534787.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:27.948Z,1520534787.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:27.963Z,1520534787.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:28.348Z,1520534788.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:28.370Z,1520534788.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:28.746Z,1520534788.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:28.761Z,1520534788.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:29.141Z,1520534789.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:29.157Z,1520534789.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:29.543Z,1520534789.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:29.558Z,1520534789.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:29.948Z,1520534789.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:29.963Z,1520534789.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:30.339Z,1520534790.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:30.354Z,1520534790.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:30.748Z,1520534790.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:30.763Z,1520534790.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:31.154Z,1520534791.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:31.169Z,1520534791.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:31.549Z,1520534791.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:31.565Z,1520534791.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:31.948Z,1520534791.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:31.963Z,1520534791.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:32.346Z,1520534792.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:32.361Z,1520534792.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:32.754Z,1520534792.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:32.774Z,1520534792.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:33.145Z,1520534793.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:33.161Z,1520534793.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:33.548Z,1520534793.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:33.564Z,1520534793.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:33.949Z,1520534793.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:33.970Z,1520534793.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:34.349Z,1520534794.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:34.365Z,1520534794.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:34.740Z,1520534794.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:34.755Z,1520534794.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:35.135Z,1520534795.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:35.162Z,1520534795.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:35.547Z,1520534795.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:35.562Z,1520534795.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:35.948Z,1520534795.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:35.964Z,1520534795.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:36.347Z,1520534796.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:36.362Z,1520534796.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:36.753Z,1520534796.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:36.768Z,1520534796.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:37.153Z,1520534797.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:37.168Z,1520534797.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:37.552Z,1520534797.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:37.568Z,1520534797.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:37.947Z,1520534797.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:37.962Z,1520534797.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:38.345Z,1520534798.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:38.360Z,1520534798.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:38.748Z,1520534798.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:38.763Z,1520534798.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:39.146Z,1520534799.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:39.166Z,1520534799.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:39.553Z,1520534799.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:39.568Z,1520534799.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:39.948Z,1520534799.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:39.964Z,1520534799.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:40.352Z,1520534800.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:40.367Z,1520534800.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:40.747Z,1520534800.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:40.763Z,1520534800.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:41.133Z,1520534801.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:41.155Z,1520534801.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:41.544Z,1520534801.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:41.559Z,1520534801.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:41.940Z,1520534801.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:41.955Z,1520534801.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:42.347Z,1520534802.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:42.362Z,1520534802.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:42.752Z,1520534802.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:42.768Z,1520534802.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:43.152Z,1520534803.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:43.167Z,1520534803.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:43.569Z,1520534803.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:43.597Z,1520534803.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:43.943Z,1520534803.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:43.958Z,1520534803.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:44.344Z,1520534804.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:44.359Z,1520534804.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:44.749Z,1520534804.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:44.764Z,1520534804.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:45.141Z,1520534805.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:45.160Z,1520534805.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:45.553Z,1520534805.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:45.569Z,1520534805.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:45.952Z,1520534805.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:45.975Z,1520534805.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:46.352Z,1520534806.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:46.367Z,1520534806.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:46.754Z,1520534806.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:46.800Z,1520534806.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:47.131Z,1520534807.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:47.157Z,1520534807.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:47.535Z,1520534807.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:47.566Z,1520534807.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:47.935Z,1520534807.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:47.971Z,1520534807.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:48.348Z,1520534808.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:48.363Z,1520534808.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:48.753Z,1520534808.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:48.769Z,1520534808.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:49.161Z,1520534809.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:49.176Z,1520534809.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:49.549Z,1520534809.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:49.565Z,1520534809.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:49.935Z,1520534809.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:49.966Z,1520534809.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:50.347Z,1520534810.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:50.363Z,1520534810.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:50.747Z,1520534810.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:50.771Z,1520534810.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:51.148Z,1520534811.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:51.163Z,1520534811.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:51.558Z,1520534811.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:51.574Z,1520534811.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:51.960Z,1520534811.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:51.975Z,1520534811.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:52.357Z,1520534812.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:52.374Z,1520534812.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:52.747Z,1520534812.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:52.762Z,1520534812.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:53.133Z,1520534813.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:53.163Z,1520534813.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:53.534Z,1520534813.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:53.571Z,1520534813.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:53.931Z,1520534813.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:53.968Z,1520534813.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:54.348Z,1520534814.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:54.363Z,1520534814.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:54.754Z,1520534814.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:54.769Z,1520534814.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:55.162Z,1520534815.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:55.177Z,1520534815.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:55.558Z,1520534815.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:55.575Z,1520534815.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:55.934Z,1520534815.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:55.967Z,1520534815.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:56.335Z,1520534816.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:56.372Z,1520534816.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:56.748Z,1520534816.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:56.763Z,1520534816.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:57.135Z,1520534817.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:57.176Z,1520534817.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:57.562Z,1520534817.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:57.577Z,1520534817.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:57.956Z,1520534817.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:57.972Z,1520534817.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:58.355Z,1520534818.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:58.370Z,1520534818.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:58.749Z,1520534818.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:58.764Z,1520534818.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:59.133Z,1520534819.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:59.172Z,1520534819.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:59.547Z,1520534819.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:59.564Z,1520534819.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:46:59.935Z,1520534819.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:46:59.966Z,1520534819.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:00.331Z,1520534820.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:00.357Z,1520534820.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:00.761Z,1520534820.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:00.783Z,1520534820.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:01.162Z,1520534821.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:01.177Z,1520534821.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:01.557Z,1520534821.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:01.575Z,1520534821.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:01.935Z,1520534821.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:01.967Z,1520534821.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:02.335Z,1520534822.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:02.367Z,1520534822.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:02.740Z,1520534822.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:02.775Z,1520534822.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:03.135Z,1520534823.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:03.166Z,1520534823.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:03.556Z,1520534823.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:03.584Z,1520534823.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:03.941Z,1520534823.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:03.967Z,1520534823.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:04.345Z,1520534824.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:04.379Z,1520534824.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:04.735Z,1520534824.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:04.770Z,1520534824.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:05.129Z,1520534825.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:05.144Z,1520534825.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:05.537Z,1520534825.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:05.552Z,1520534825.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:05.943Z,1520534825.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:05.980Z,1520534825.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:06.336Z,1520534826.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:06.351Z,1520534826.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:06.753Z,1520534826.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:06.779Z,1520534826.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:07.153Z,1520534827.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:07.180Z,1520534827.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:07.550Z,1520534827.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:07.575Z,1520534827.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:07.940Z,1520534827.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:07.955Z,1520534827.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:08.343Z,1520534828.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:08.357Z,1520534828.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:08.736Z,1520534828.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:08.751Z,1520534828.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:09.142Z,1520534829.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:09.179Z,1520534829.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:09.557Z,1520534829.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:09.590Z,1520534829.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:09.949Z,1520534829.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:09.964Z,1520534829.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:10.357Z,1520534830.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:10.388Z,1520534830.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:10.742Z,1520534830.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:10.757Z,1520534830.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:13.845Z,1520534833.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:13.866Z,1520534833.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:13.979Z,1520534833.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:14.010Z,1520534834.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:14.362Z,1520534834.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:14.389Z,1520534834.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:14.757Z,1520534834.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:14.790Z,1520534834.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:15.161Z,1520534835.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:15.185Z,1520534835.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:15.543Z,1520534835.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:15.558Z,1520534835.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:15.947Z,1520534835.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:15.963Z,1520534835.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:16.345Z,1520534836.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:16.362Z,1520534836.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:16.757Z,1520534836.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:16.781Z,1520534836.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:17.157Z,1520534837.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:17.172Z,1520534837.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:17.549Z,1520534837.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:17.564Z,1520534837.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:17.948Z,1520534837.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:17.963Z,1520534837.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:18.348Z,1520534838.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:18.363Z,1520534838.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:18.747Z,1520534838.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:18.762Z,1520534838.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:19.148Z,1520534839.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:19.163Z,1520534839.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:19.548Z,1520534839.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:19.570Z,1520534839.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:19.961Z,1520534839.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:19.976Z,1520534839.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:20.361Z,1520534840.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:20.396Z,1520534840.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:20.739Z,1520534840.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:20.758Z,1520534840.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:21.148Z,1520534841.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:21.163Z,1520534841.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:21.546Z,1520534841.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:21.565Z,1520534841.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:21.949Z,1520534841.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:21.965Z,1520534841.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:22.346Z,1520534842.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:22.361Z,1520534842.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:22.761Z,1520534842.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:22.793Z,1520534842.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:23.149Z,1520534843.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:23.165Z,1520534843.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:23.561Z,1520534843.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:23.576Z,1520534843.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:23.953Z,1520534843.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:23.968Z,1520534843.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:24.350Z,1520534844.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:24.365Z,1520534844.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:24.746Z,1520534844.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:24.773Z,1520534844.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:25.151Z,1520534845.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:25.174Z,1520534845.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:25.556Z,1520534845.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:25.579Z,1520534845.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:25.958Z,1520534845.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:25.973Z,1520534845.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:26.357Z,1520534846.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:26.379Z,1520534846.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:26.740Z,1520534846.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:26.763Z,1520534846.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:27.143Z,1520534847.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:27.165Z,1520534847.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:27.545Z,1520534847.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:27.568Z,1520534847.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:27.951Z,1520534847.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:27.968Z,1520534847.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:28.347Z,1520534848.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:28.367Z,1520534848.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:28.761Z,1520534848.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:28.777Z,1520534848.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:29.160Z,1520534849.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:29.183Z,1520534849.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:29.560Z,1520534849.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:29.575Z,1520534849.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:29.952Z,1520534849.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:29.968Z,1520534849.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:30.335Z,1520534850.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:30.367Z,1520534850.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:30.747Z,1520534850.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:30.768Z,1520534850.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:31.145Z,1520534851.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:31.167Z,1520534851.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:31.550Z,1520534851.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:31.577Z,1520534851.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:31.964Z,1520534851.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:31.979Z,1520534851.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:32.365Z,1520534852.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:32.380Z,1520534852.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:32.751Z,1520534852.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:32.767Z,1520534852.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:33.151Z,1520534853.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:33.171Z,1520534853.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:33.561Z,1520534853.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:33.576Z,1520534853.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:33.940Z,1520534853.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:33.971Z,1520534853.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:34.342Z,1520534854.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:34.374Z,1520534854.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:34.763Z,1520534854.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:34.779Z,1520534854.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:35.162Z,1520534855.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:35.178Z,1520534855.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:35.568Z,1520534855.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:35.583Z,1520534855.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:35.940Z,1520534855.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:35.971Z,1520534855.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:36.340Z,1520534856.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:36.367Z,1520534856.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:36.741Z,1520534856.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:36.777Z,1520534856.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:37.144Z,1520534857.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:37.181Z,1520534857.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:37.564Z,1520534857.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:37.580Z,1520534857.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:37.964Z,1520534857.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:37.980Z,1520534857.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:38.348Z,1520534858.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:38.390Z,1520534858.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:38.743Z,1520534858.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:38.776Z,1520534858.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:39.138Z,1520534859.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:39.190Z,1520534859.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:39.546Z,1520534859.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:39.580Z,1520534859.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:39.944Z,1520534859.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:39.977Z,1520534859.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:40.343Z,1520534860.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:40.358Z,1520534860.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:40.761Z,1520534860.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:40.789Z,1520534860.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:41.161Z,1520534861.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:41.187Z,1520534861.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:41.557Z,1520534861.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:41.581Z,1520534861.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:41.943Z,1520534861.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:41.958Z,1520534861.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:42.347Z,1520534862.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:42.385Z,1520534862.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:42.752Z,1520534862.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:42.787Z,1520534862.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:43.144Z,1520534863.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:43.159Z,1520534863.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:43.561Z,1520534863.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:43.590Z,1520534863.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:43.957Z,1520534863.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:43.982Z,1520534863.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:44.361Z,1520534864.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:44.394Z,1520534864.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:44.743Z,1520534864.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:44.759Z,1520534864.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:45.151Z,1520534865.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:45.167Z,1520534865.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:45.546Z,1520534865.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:45.561Z,1520534865.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:45.949Z,1520534865.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:45.965Z,1520534865.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:46.348Z,1520534866.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:46.363Z,1520534866.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:46.761Z,1520534866.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:46.793Z,1520534866.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:47.158Z,1520534867.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:47.193Z,1520534867.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:47.561Z,1520534867.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:47.592Z,1520534867.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:47.948Z,1520534867.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:47.963Z,1520534867.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:48.343Z,1520534868.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:48.358Z,1520534868.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:48.751Z,1520534868.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:48.771Z,1520534868.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:49.150Z,1520534869.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:49.166Z,1520534869.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:49.553Z,1520534869.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:49.569Z,1520534869.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:49.957Z,1520534869.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:49.972Z,1520534869.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:50.357Z,1520534870.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:50.378Z,1520534870.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:50.744Z,1520534870.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:50.759Z,1520534870.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:51.147Z,1520534871.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:51.162Z,1520534871.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:51.543Z,1520534871.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:51.566Z,1520534871.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:51.953Z,1520534871.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:51.968Z,1520534871.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:52.350Z,1520534872.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:52.370Z,1520534872.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:52.757Z,1520534872.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:52.772Z,1520534872.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:53.157Z,1520534873.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:53.172Z,1520534873.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:53.556Z,1520534873.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:53.579Z,1520534873.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:53.951Z,1520534873.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:53.967Z,1520534873.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:54.351Z,1520534874.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:54.370Z,1520534874.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:54.752Z,1520534874.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:54.767Z,1520534874.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:55.143Z,1520534875.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:55.162Z,1520534875.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:55.551Z,1520534875.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:55.571Z,1520534875.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:55.960Z,1520534875.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:55.975Z,1520534875.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:56.361Z,1520534876.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:56.382Z,1520534876.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:56.749Z,1520534876.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:56.770Z,1520534876.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:57.151Z,1520534877.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:57.170Z,1520534877.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:57.552Z,1520534877.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:57.567Z,1520534877.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:57.950Z,1520534877.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:57.970Z,1520534877.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:58.350Z,1520534878.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:58.370Z,1520534878.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:58.761Z,1520534878.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:58.777Z,1520534878.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:59.160Z,1520534879.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:59.175Z,1520534879.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:59.561Z,1520534879.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:59.576Z,1520534879.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:47:59.951Z,1520534879.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:47:59.967Z,1520534879.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:00.351Z,1520534880.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:00.371Z,1520534880.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:00.751Z,1520534880.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:00.774Z,1520534880.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:01.151Z,1520534881.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:01.166Z,1520534881.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:01.561Z,1520534881.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:01.583Z,1520534881.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:01.960Z,1520534881.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:01.983Z,1520534881.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:02.361Z,1520534882.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:02.377Z,1520534882.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:02.745Z,1520534882.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:02.765Z,1520534882.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:03.143Z,1520534883.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:03.165Z,1520534883.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:03.535Z,1520534883.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:03.572Z,1520534883.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:03.950Z,1520534883.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:03.970Z,1520534883.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:04.347Z,1520534884.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:04.367Z,1520534884.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:04.758Z,1520534884.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:04.774Z,1520534884.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:05.160Z,1520534885.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:05.175Z,1520534885.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:05.560Z,1520534885.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:05.583Z,1520534885.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:05.951Z,1520534885.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:05.966Z,1520534885.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:06.351Z,1520534886.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:06.370Z,1520534886.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:06.751Z,1520534886.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:06.770Z,1520534886.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:07.134Z,1520534887.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:07.163Z,1520534887.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:07.560Z,1520534887.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:07.576Z,1520534887.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:07.960Z,1520534887.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:07.975Z,1520534887.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:08.367Z,1520534888.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:08.408Z,1520534888.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:08.739Z,1520534888.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:08.765Z,1520534888.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:09.139Z,1520534889.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:09.175Z,1520534889.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:09.542Z,1520534889.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:09.574Z,1520534889.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:09.942Z,1520534889.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:09.969Z,1520534889.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:10.338Z,1520534890.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:10.366Z,1520534890.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:10.762Z,1520534890.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:10.782Z,1520534890.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:13.889Z,1520534893.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:13.915Z,1520534893.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:14.021Z,1520534894.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:14.061Z,1520534894.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:14.373Z,1520534894.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:14.389Z,1520534894.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:14.771Z,1520534894.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:14.802Z,1520534894.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:15.169Z,1520534895.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:15.193Z,1520534895.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:15.578Z,1520534895.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:15.599Z,1520534895.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:15.981Z,1520534895.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:15.997Z,1520534895.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:16.377Z,1520534896.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:16.393Z,1520534896.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:16.777Z,1520534896.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:16.792Z,1520534896.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:17.174Z,1520534897.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:17.190Z,1520534897.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:17.577Z,1520534897.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:17.592Z,1520534897.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:17.970Z,1520534897.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:17.992Z,1520534897.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:18.378Z,1520534898.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:18.399Z,1520534898.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:18.782Z,1520534898.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:18.797Z,1520534898.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:19.177Z,1520534899.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:19.193Z,1520534899.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:19.578Z,1520534899.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:19.593Z,1520534899.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:19.963Z,1520534899.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:19.987Z,1520534899.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:20.378Z,1520534900.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:20.394Z,1520534900.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:20.776Z,1520534900.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:20.792Z,1520534900.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:21.177Z,1520534901.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:21.193Z,1520534901.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:21.574Z,1520534901.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:21.590Z,1520534901.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:21.966Z,1520534901.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:21.997Z,1520534901.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:22.375Z,1520534902.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:22.394Z,1520534902.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:22.780Z,1520534902.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:22.795Z,1520534902.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:23.181Z,1520534903.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:23.195Z,1520534903.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:23.576Z,1520534903.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:23.592Z,1520534903.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:23.974Z,1520534903.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:23.991Z,1520534903.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:24.375Z,1520534904.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:24.391Z,1520534904.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:24.777Z,1520534904.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:24.792Z,1520534904.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:25.171Z,1520534905.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:25.186Z,1520534905.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:25.581Z,1520534905.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:25.602Z,1520534905.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:25.981Z,1520534905.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:25.997Z,1520534905.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:26.380Z,1520534906.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:26.395Z,1520534906.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:26.767Z,1520534906.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:26.795Z,1520534906.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:27.159Z,1520534907.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:27.200Z,1520534907.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:27.575Z,1520534907.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:27.594Z,1520534907.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:27.963Z,1520534907.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:27.998Z,1520534907.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:28.375Z,1520534908.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:28.394Z,1520534908.394 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:28.395Z,1520534908.395 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 221
2018-03-08T18:48:28.395Z,1520534908.395 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T18:48:28.397Z,1520534908.397 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:28.397Z,1520534908.397 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 221
2018-03-08T18:48:28.397Z,1520534908.397 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T18:48:28.398Z,1520534908.398 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:28.398Z,1520534908.398 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 221
2018-03-08T18:48:28.399Z,1520534908.399 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T18:48:28.410Z,1520534908.410 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T18:48:28.410Z,1520534908.410 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T18:48:28.411Z,1520534908.411 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T18:48:28.793Z,1520534908.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:28.819Z,1520534908.819 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T18:48:28.819Z,1520534908.819 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 221
2018-03-08T18:48:28.819Z,1520534908.819 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T18:48:28.819Z,1520534908.819 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 221
2018-03-08T18:48:28.820Z,1520534908.820 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T18:48:28.820Z,1520534908.820 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 221
2018-03-08T18:48:29.181Z,1520534909.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:29.205Z,1520534909.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T18:48:29.206Z,1520534909.206 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:48:29.206Z,1520534909.206 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:48:29.207Z,1520534909.207 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T18:48:29.207Z,1520534909.207 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:48:29.207Z,1520534909.207 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:48:29.208Z,1520534909.208 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T18:48:29.208Z,1520534909.208 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:48:29.208Z,1520534909.208 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:48:29.586Z,1520534909.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:29.601Z,1520534909.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T18:48:29.602Z,1520534909.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:29.963Z,1520534909.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:29.998Z,1520534909.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T18:48:29.999Z,1520534909.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:30.363Z,1520534910.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:30.397Z,1520534910.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T18:48:30.398Z,1520534910.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:30.767Z,1520534910.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:30.806Z,1520534910.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T18:48:30.807Z,1520534910.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:31.166Z,1520534911.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:31.198Z,1520534911.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T18:48:31.199Z,1520534911.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:31.587Z,1520534911.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:31.602Z,1520534911.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T18:48:31.603Z,1520534911.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:31.989Z,1520534911.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:32.004Z,1520534912.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T18:48:32.005Z,1520534912.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:32.373Z,1520534912.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:32.406Z,1520534912.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T18:48:32.407Z,1520534912.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:32.763Z,1520534912.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:32.799Z,1520534912.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T18:48:32.800Z,1520534912.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:33.167Z,1520534913.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:33.218Z,1520534913.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T18:48:33.219Z,1520534913.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:33.566Z,1520534913.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:33.599Z,1520534913.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T18:48:33.599Z,1520534913.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:33.962Z,1520534913.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:33.999Z,1520534913.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T18:48:34.000Z,1520534914.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:34.367Z,1520534914.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:34.398Z,1520534914.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T18:48:34.399Z,1520534914.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:34.773Z,1520534914.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:34.808Z,1520534914.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T18:48:34.809Z,1520534914.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:35.185Z,1520534915.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:35.210Z,1520534915.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T18:48:35.211Z,1520534915.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:35.586Z,1520534915.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:35.606Z,1520534915.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T18:48:35.607Z,1520534915.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:35.963Z,1520534915.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:35.998Z,1520534915.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T18:48:35.999Z,1520534915.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:36.363Z,1520534916.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:36.398Z,1520534916.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T18:48:36.399Z,1520534916.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:36.771Z,1520534916.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:36.802Z,1520534916.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T18:48:36.803Z,1520534916.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:37.163Z,1520534917.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:37.198Z,1520534917.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T18:48:37.199Z,1520534917.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:37.577Z,1520534917.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:37.684Z,1520534917.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-08T18:48:37.701Z,1520534917.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:37.977Z,1520534917.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:38.003Z,1520534918.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T18:48:38.004Z,1520534918.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:38.378Z,1520534918.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:38.498Z,1520534918.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T18:48:38.499Z,1520534918.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:38.770Z,1520534918.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:38.784Z,1520534918.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T18:48:38.797Z,1520534918.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:39.215Z,1520534919.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:39.230Z,1520534919.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T18:48:39.231Z,1520534919.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:39.583Z,1520534919.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:39.607Z,1520534919.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T18:48:39.607Z,1520534919.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:39.965Z,1520534919.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:39.999Z,1520534919.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T18:48:40.000Z,1520534920.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:40.370Z,1520534920.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:40.464Z,1520534920.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T18:48:40.469Z,1520534920.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:40.775Z,1520534920.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:40.838Z,1520534920.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T18:48:40.839Z,1520534920.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:41.188Z,1520534921.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:41.211Z,1520534921.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T18:48:41.212Z,1520534921.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:41.591Z,1520534921.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:41.628Z,1520534921.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T18:48:41.638Z,1520534921.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:41.977Z,1520534921.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:42.028Z,1520534922.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T18:48:42.037Z,1520534922.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:42.364Z,1520534922.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:42.445Z,1520534922.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-08T18:48:42.446Z,1520534922.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:42.779Z,1520534922.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:42.798Z,1520534922.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T18:48:42.799Z,1520534922.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:43.174Z,1520534923.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:43.194Z,1520534923.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T18:48:43.195Z,1520534923.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:43.582Z,1520534923.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:43.602Z,1520534923.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T18:48:43.603Z,1520534923.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:43.988Z,1520534923.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:44.003Z,1520534924.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T18:48:44.003Z,1520534924.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:44.381Z,1520534924.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:44.396Z,1520534924.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T18:48:44.397Z,1520534924.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:44.759Z,1520534924.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:44.786Z,1520534924.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T18:48:44.787Z,1520534924.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:45.176Z,1520534925.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:45.198Z,1520534925.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T18:48:45.199Z,1520534925.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:45.574Z,1520534925.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:45.589Z,1520534925.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T18:48:45.590Z,1520534925.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:45.963Z,1520534925.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:45.998Z,1520534925.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T18:48:45.999Z,1520534925.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:46.374Z,1520534926.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:46.394Z,1520534926.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T18:48:46.395Z,1520534926.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:46.781Z,1520534926.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:46.796Z,1520534926.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T18:48:46.797Z,1520534926.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:47.181Z,1520534927.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:47.202Z,1520534927.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T18:48:47.203Z,1520534927.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:47.585Z,1520534927.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:47.599Z,1520534927.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T18:48:47.601Z,1520534927.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:47.979Z,1520534927.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:47.998Z,1520534927.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T18:48:47.999Z,1520534927.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:48.359Z,1520534928.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:48.385Z,1520534928.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T18:48:48.386Z,1520534928.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:48.776Z,1520534928.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:48.791Z,1520534928.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:49.163Z,1520534929.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:49.195Z,1520534929.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:49.582Z,1520534929.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:49.602Z,1520534929.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:49.988Z,1520534929.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:50.003Z,1520534930.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:50.385Z,1520534930.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:50.400Z,1520534930.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:50.763Z,1520534930.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:50.790Z,1520534930.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:51.163Z,1520534931.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:51.194Z,1520534931.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:51.563Z,1520534931.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:51.595Z,1520534931.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:51.959Z,1520534931.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:51.998Z,1520534931.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:52.375Z,1520534932.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:52.395Z,1520534932.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:52.785Z,1520534932.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:52.807Z,1520534932.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:53.189Z,1520534933.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:53.205Z,1520534933.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:53.585Z,1520534933.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:53.601Z,1520534933.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:53.963Z,1520534933.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:53.995Z,1520534933.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:54.377Z,1520534934.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:54.392Z,1520534934.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:54.775Z,1520534934.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:54.791Z,1520534934.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:55.163Z,1520534935.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:55.199Z,1520534935.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:55.586Z,1520534935.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:55.606Z,1520534935.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:55.979Z,1520534935.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:55.994Z,1520534935.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:56.383Z,1520534936.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:56.398Z,1520534936.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:56.763Z,1520534936.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:56.803Z,1520534936.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:57.160Z,1520534937.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:57.199Z,1520534937.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:57.576Z,1520534937.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:57.598Z,1520534937.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:57.963Z,1520534937.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:57.993Z,1520534937.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:58.375Z,1520534938.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:58.395Z,1520534938.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:58.782Z,1520534938.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:58.798Z,1520534938.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:59.189Z,1520534939.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:59.205Z,1520534939.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:59.581Z,1520534939.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:59.603Z,1520534939.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:48:59.975Z,1520534939.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:48:59.990Z,1520534939.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:00.363Z,1520534940.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:00.390Z,1520534940.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:00.776Z,1520534940.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:00.791Z,1520534940.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:01.174Z,1520534941.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:01.190Z,1520534941.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:01.579Z,1520534941.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:01.602Z,1520534941.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:01.981Z,1520534941.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:01.997Z,1520534941.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:02.385Z,1520534942.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:02.407Z,1520534942.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:02.775Z,1520534942.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:02.790Z,1520534942.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:03.162Z,1520534943.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:03.189Z,1520534943.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:03.563Z,1520534943.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:03.600Z,1520534943.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:03.967Z,1520534943.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:03.995Z,1520534943.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:04.367Z,1520534944.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:04.394Z,1520534944.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:04.781Z,1520534944.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:04.797Z,1520534944.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:05.185Z,1520534945.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:05.200Z,1520534945.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:05.581Z,1520534945.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:05.597Z,1520534945.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:05.983Z,1520534945.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:06.023Z,1520534946.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:06.371Z,1520534946.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:06.431Z,1520534946.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:06.770Z,1520534946.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:06.800Z,1520534946.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:07.170Z,1520534947.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:07.193Z,1520534947.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:07.577Z,1520534947.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:07.611Z,1520534947.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:07.977Z,1520534947.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:08.008Z,1520534948.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:08.381Z,1520534948.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:08.415Z,1520534948.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:08.775Z,1520534948.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:08.789Z,1520534948.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:09.160Z,1520534949.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:09.202Z,1520534949.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:09.572Z,1520534949.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:09.587Z,1520534949.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:09.973Z,1520534949.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:09.988Z,1520534949.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:10.371Z,1520534950.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:10.387Z,1520534950.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:10.773Z,1520534950.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:10.789Z,1520534950.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:13.881Z,1520534953.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:13.896Z,1520534953.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:14.011Z,1520534954.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:14.046Z,1520534954.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:14.378Z,1520534954.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:14.398Z,1520534954.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:14.781Z,1520534954.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:14.796Z,1520534954.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:15.175Z,1520534955.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:15.192Z,1520534955.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:15.581Z,1520534955.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:15.597Z,1520534955.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:15.993Z,1520534955.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:16.026Z,1520534956.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:16.393Z,1520534956.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:16.424Z,1520534956.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:16.778Z,1520534956.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:16.793Z,1520534956.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:17.177Z,1520534957.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:17.195Z,1520534957.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:17.580Z,1520534957.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:17.595Z,1520534957.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:17.979Z,1520534957.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:17.995Z,1520534957.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:18.393Z,1520534958.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:18.426Z,1520534958.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:18.781Z,1520534958.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:18.797Z,1520534958.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:19.181Z,1520534959.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:19.197Z,1520534959.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:19.580Z,1520534959.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:19.595Z,1520534959.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:19.968Z,1520534959.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:19.995Z,1520534959.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:20.381Z,1520534960.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:20.397Z,1520534960.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:20.793Z,1520534960.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:20.825Z,1520534960.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:21.180Z,1520534961.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:21.195Z,1520534961.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:21.580Z,1520534961.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:21.602Z,1520534961.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:21.979Z,1520534961.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:21.994Z,1520534961.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:22.380Z,1520534962.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:22.402Z,1520534962.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:22.784Z,1520534962.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:22.807Z,1520534962.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:23.189Z,1520534963.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:23.204Z,1520534963.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:23.584Z,1520534963.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:23.599Z,1520534963.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:23.979Z,1520534963.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:23.994Z,1520534963.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:24.380Z,1520534964.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:24.395Z,1520534964.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:24.783Z,1520534964.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:24.803Z,1520534964.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:25.182Z,1520534965.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:25.197Z,1520534965.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:25.589Z,1520534965.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:25.604Z,1520534965.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:25.984Z,1520534965.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:25.000Z,1520534966.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:26.385Z,1520534966.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:26.401Z,1520534966.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:26.782Z,1520534966.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:26.797Z,1520534966.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:27.176Z,1520534967.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:27.191Z,1520534967.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:27.580Z,1520534967.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:27.595Z,1520534967.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:27.982Z,1520534967.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:27.997Z,1520534967.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:28.382Z,1520534968.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:28.397Z,1520534968.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:28.784Z,1520534968.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:28.807Z,1520534968.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:29.189Z,1520534969.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:29.204Z,1520534969.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:29.581Z,1520534969.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:29.609Z,1520534969.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:29.984Z,1520534969.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:30.006Z,1520534970.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:30.384Z,1520534970.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:30.399Z,1520534970.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:30.785Z,1520534970.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:30.800Z,1520534970.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:31.183Z,1520534971.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:31.198Z,1520534971.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:31.589Z,1520534971.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:31.604Z,1520534971.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:31.984Z,1520534971.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:32.008Z,1520534972.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:32.393Z,1520534972.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:32.408Z,1520534972.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:32.785Z,1520534972.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:32.800Z,1520534972.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:33.177Z,1520534973.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:33.197Z,1520534973.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:33.580Z,1520534973.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:33.595Z,1520534973.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:33.982Z,1520534973.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:33.997Z,1520534973.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:34.378Z,1520534974.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:34.411Z,1520534974.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:34.796Z,1520534974.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:34.812Z,1520534974.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:35.196Z,1520534975.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:35.211Z,1520534975.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:35.585Z,1520534975.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:35.619Z,1520534975.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:35.975Z,1520534975.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:36.002Z,1520534976.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:36.367Z,1520534976.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:36.401Z,1520534976.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:36.775Z,1520534976.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:36.807Z,1520534976.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:37.170Z,1520534977.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:37.199Z,1520534977.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:37.594Z,1520534977.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:37.610Z,1520534977.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:37.987Z,1520534977.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:38.023Z,1520534978.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:38.394Z,1520534978.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:38.409Z,1520534978.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:38.771Z,1520534978.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:38.799Z,1520534978.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:39.168Z,1520534979.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:39.207Z,1520534979.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:39.574Z,1520534979.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:39.601Z,1520534979.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:39.967Z,1520534979.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:39.999Z,1520534979.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:40.371Z,1520534980.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:40.402Z,1520534980.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:40.789Z,1520534980.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:40.805Z,1520534980.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:41.194Z,1520534981.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:41.209Z,1520534981.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:41.585Z,1520534981.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:41.607Z,1520534981.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:41.974Z,1520534981.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:42.001Z,1520534982.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:42.367Z,1520534982.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:42.399Z,1520534982.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:42.774Z,1520534982.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:42.801Z,1520534982.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:43.170Z,1520534983.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:43.197Z,1520534983.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:43.594Z,1520534983.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:43.609Z,1520534983.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:43.981Z,1520534983.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:44.005Z,1520534984.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:44.389Z,1520534984.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:44.405Z,1520534984.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:44.767Z,1520534984.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:44.799Z,1520534984.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:45.165Z,1520534985.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:45.188Z,1520534985.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:45.574Z,1520534985.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:45.601Z,1520534985.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:45.966Z,1520534985.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:46.005Z,1520534986.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:46.375Z,1520534986.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:46.401Z,1520534986.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:46.793Z,1520534986.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:46.809Z,1520534986.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:47.194Z,1520534987.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:47.209Z,1520534987.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:47.589Z,1520534987.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:47.604Z,1520534987.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:47.971Z,1520534987.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:48.002Z,1520534988.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:48.367Z,1520534988.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:48.403Z,1520534988.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:48.776Z,1520534988.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:48.803Z,1520534988.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:49.170Z,1520534989.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:49.202Z,1520534989.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:49.592Z,1520534989.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:49.615Z,1520534989.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:49.989Z,1520534989.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:50.008Z,1520534990.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:50.389Z,1520534990.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:50.404Z,1520534990.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:50.771Z,1520534990.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:50.804Z,1520534990.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:51.168Z,1520534991.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:51.211Z,1520534991.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:51.574Z,1520534991.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:51.601Z,1520534991.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:51.970Z,1520534991.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:52.003Z,1520534992.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:52.374Z,1520534992.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:52.401Z,1520534992.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:52.789Z,1520534992.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:52.805Z,1520534992.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:53.194Z,1520534993.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:53.214Z,1520534993.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:53.578Z,1520534993.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:53.613Z,1520534993.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:53.974Z,1520534993.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:54.001Z,1520534994.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:54.371Z,1520534994.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:54.403Z,1520534994.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:54.775Z,1520534994.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:54.802Z,1520534994.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:55.170Z,1520534995.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:55.203Z,1520534995.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:55.599Z,1520534995.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:55.622Z,1520534995.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:55.977Z,1520534995.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:56.003Z,1520534996.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:56.394Z,1520534996.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:56.409Z,1520534996.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:56.775Z,1520534996.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:56.807Z,1520534996.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:57.165Z,1520534997.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:57.200Z,1520534997.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:57.571Z,1520534997.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:57.611Z,1520534997.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:57.976Z,1520534997.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:57.991Z,1520534997.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:58.372Z,1520534998.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:58.388Z,1520534998.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:58.789Z,1520534998.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:58.813Z,1520534998.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:59.189Z,1520534999.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:59.213Z,1520534999.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:59.585Z,1520534999.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:59.617Z,1520534999.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:49:59.979Z,1520534999.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:49:59.998Z,1520534999.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:00.380Z,1520535000.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:00.396Z,1520535000.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:00.780Z,1520535000.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:00.795Z,1520535000.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:01.176Z,1520535001.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:01.191Z,1520535001.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:01.593Z,1520535001.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:01.626Z,1520535001.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:01.977Z,1520535001.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:01.993Z,1520535001.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:02.385Z,1520535002.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:02.400Z,1520535002.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:02.780Z,1520535002.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:02.796Z,1520535002.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:03.176Z,1520535003.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:03.226Z,1520535003.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:03.576Z,1520535003.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:03.591Z,1520535003.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:03.979Z,1520535003.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:03.995Z,1520535003.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:04.375Z,1520535004.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:04.395Z,1520535004.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:04.793Z,1520535004.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:04.824Z,1520535004.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:05.194Z,1520535005.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:05.226Z,1520535005.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:05.585Z,1520535005.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:05.601Z,1520535005.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:05.980Z,1520535005.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:05.995Z,1520535005.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:06.376Z,1520535006.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:06.391Z,1520535006.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:06.781Z,1520535006.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:06.796Z,1520535006.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:07.180Z,1520535007.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:07.195Z,1520535007.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:07.589Z,1520535007.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:07.617Z,1520535007.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:07.993Z,1520535007.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:08.008Z,1520535008.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:08.385Z,1520535008.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:08.401Z,1520535008.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:08.784Z,1520535008.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:08.800Z,1520535008.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:09.182Z,1520535009.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:09.198Z,1520535009.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:09.580Z,1520535009.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:09.602Z,1520535009.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:09.986Z,1520535009.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:10.001Z,1520535010.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:10.376Z,1520535010.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:10.391Z,1520535010.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:10.789Z,1520535010.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:10.805Z,1520535010.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:13.893Z,1520535013.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:13.908Z,1520535013.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:14.022Z,1520535014.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:14.058Z,1520535014.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:14.400Z,1520535014.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:14.432Z,1520535014.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:14.800Z,1520535014.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:14.816Z,1520535014.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:15.195Z,1520535015.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:15.211Z,1520535015.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:15.610Z,1520535015.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:15.645Z,1520535015.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:16.009Z,1520535016.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:16.037Z,1520535016.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:16.413Z,1520535016.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:16.448Z,1520535016.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:16.801Z,1520535016.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:16.817Z,1520535016.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:17.200Z,1520535017.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:17.215Z,1520535017.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:17.601Z,1520535017.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:17.617Z,1520535017.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:17.000Z,1520535018.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:18.016Z,1520535018.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:18.413Z,1520535018.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:18.453Z,1520535018.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:18.805Z,1520535018.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:18.821Z,1520535018.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:19.201Z,1520535019.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:19.217Z,1520535019.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:19.601Z,1520535019.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:19.616Z,1520535019.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:19.999Z,1520535019.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:20.015Z,1520535020.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:20.401Z,1520535020.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:20.417Z,1520535020.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:20.806Z,1520535020.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:20.823Z,1520535020.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:21.205Z,1520535021.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:21.221Z,1520535021.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:21.599Z,1520535021.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:21.614Z,1520535021.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:22.003Z,1520535022.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:22.018Z,1520535022.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:22.399Z,1520535022.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:22.414Z,1520535022.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:22.804Z,1520535022.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:22.819Z,1520535022.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:23.205Z,1520535023.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:23.220Z,1520535023.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:23.605Z,1520535023.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:23.621Z,1520535023.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:24.002Z,1520535024.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:24.017Z,1520535024.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:24.401Z,1520535024.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:24.416Z,1520535024.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:24.803Z,1520535024.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:24.823Z,1520535024.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:25.202Z,1520535025.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:25.217Z,1520535025.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:25.605Z,1520535025.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:25.620Z,1520535025.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:26.009Z,1520535026.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:26.024Z,1520535026.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:26.406Z,1520535026.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:26.421Z,1520535026.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:26.802Z,1520535026.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:26.817Z,1520535026.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:27.199Z,1520535027.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:27.214Z,1520535027.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:27.603Z,1520535027.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:27.618Z,1520535027.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:28.003Z,1520535028.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:28.018Z,1520535028.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:28.402Z,1520535028.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:28.418Z,1520535028.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:28.804Z,1520535028.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:28.819Z,1520535028.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:29.209Z,1520535029.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:29.224Z,1520535029.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:29.605Z,1520535029.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:29.621Z,1520535029.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:29.997Z,1520535029.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:30.017Z,1520535030.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:30.402Z,1520535030.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:30.417Z,1520535030.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:30.803Z,1520535030.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:30.822Z,1520535030.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:31.203Z,1520535031.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:31.218Z,1520535031.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:31.605Z,1520535031.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:31.620Z,1520535031.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:32.009Z,1520535032.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:32.024Z,1520535032.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:32.405Z,1520535032.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:32.421Z,1520535032.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:32.802Z,1520535032.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:32.817Z,1520535032.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:33.203Z,1520535033.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:33.219Z,1520535033.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:33.599Z,1520535033.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:33.614Z,1520535033.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:34.004Z,1520535034.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:34.019Z,1520535034.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:34.402Z,1520535034.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:34.417Z,1520535034.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:34.804Z,1520535034.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:34.819Z,1520535034.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:35.207Z,1520535035.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:35.221Z,1520535035.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:35.605Z,1520535035.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:35.621Z,1520535035.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:36.000Z,1520535036.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:36.015Z,1520535036.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:36.402Z,1520535036.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:36.417Z,1520535036.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:36.799Z,1520535036.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:36.818Z,1520535036.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:37.203Z,1520535037.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:37.218Z,1520535037.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:37.605Z,1520535037.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:37.620Z,1520535037.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:38.010Z,1520535038.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:38.025Z,1520535038.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:38.404Z,1520535038.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:38.426Z,1520535038.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:38.798Z,1520535038.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:38.813Z,1520535038.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:39.202Z,1520535039.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:39.217Z,1520535039.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:39.599Z,1520535039.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:39.614Z,1520535039.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:39.997Z,1520535039.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:40.023Z,1520535040.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:40.402Z,1520535040.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:40.417Z,1520535040.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:40.805Z,1520535040.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:40.820Z,1520535040.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:41.217Z,1520535041.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:41.232Z,1520535041.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:41.605Z,1520535041.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:41.621Z,1520535041.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:42.002Z,1520535042.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:42.017Z,1520535042.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:42.398Z,1520535042.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:42.413Z,1520535042.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:42.803Z,1520535042.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:42.819Z,1520535042.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:43.202Z,1520535043.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:43.222Z,1520535043.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:43.605Z,1520535043.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:43.620Z,1520535043.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:44.009Z,1520535044.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:44.024Z,1520535044.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:44.409Z,1520535044.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:44.424Z,1520535044.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:44.800Z,1520535044.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:44.815Z,1520535044.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:45.202Z,1520535045.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:45.217Z,1520535045.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:45.599Z,1520535045.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:45.615Z,1520535045.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:46.001Z,1520535046.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:46.015Z,1520535046.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:46.403Z,1520535046.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:46.418Z,1520535046.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:46.804Z,1520535046.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:46.827Z,1520535046.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:47.217Z,1520535047.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:47.232Z,1520535047.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:47.606Z,1520535047.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:47.622Z,1520535047.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:48.003Z,1520535048.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:48.018Z,1520535048.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:48.404Z,1520535048.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:48.418Z,1520535048.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:48.804Z,1520535048.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:48.819Z,1520535048.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:49.203Z,1520535049.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:49.218Z,1520535049.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:49.606Z,1520535049.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:49.622Z,1520535049.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:50.005Z,1520535050.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:50.021Z,1520535050.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:50.409Z,1520535050.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:50.424Z,1520535050.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:50.805Z,1520535050.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:50.820Z,1520535050.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:51.196Z,1520535051.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:51.220Z,1520535051.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:51.604Z,1520535051.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:51.620Z,1520535051.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:52.007Z,1520535052.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:52.022Z,1520535052.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:52.396Z,1520535052.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:52.418Z,1520535052.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:52.810Z,1520535052.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:52.831Z,1520535052.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:53.210Z,1520535053.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:53.225Z,1520535053.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:53.605Z,1520535053.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:53.624Z,1520535053.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:54.007Z,1520535054.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:54.022Z,1520535054.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:54.400Z,1520535054.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:54.417Z,1520535054.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:54.786Z,1520535054.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:54.801Z,1520535054.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:55.202Z,1520535055.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:55.222Z,1520535055.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:55.614Z,1520535055.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:55.630Z,1520535055.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:56.010Z,1520535056.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:56.026Z,1520535056.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:56.413Z,1520535056.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:56.428Z,1520535056.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:56.804Z,1520535056.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:56.819Z,1520535056.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:57.197Z,1520535057.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:57.217Z,1520535057.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:57.599Z,1520535057.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:57.615Z,1520535057.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:57.988Z,1520535057.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:58.015Z,1520535058.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:58.399Z,1520535058.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:58.419Z,1520535058.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:58.809Z,1520535058.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:58.825Z,1520535058.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:59.213Z,1520535059.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:59.229Z,1520535059.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:59.608Z,1520535059.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:50:59.623Z,1520535059.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:50:59.000Z,1520535060.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:00.015Z,1520535060.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:00.387Z,1520535060.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:00.422Z,1520535060.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:00.804Z,1520535060.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:00.826Z,1520535060.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:01.202Z,1520535061.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:01.218Z,1520535061.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:01.612Z,1520535061.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:01.628Z,1520535061.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:02.009Z,1520535062.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:02.025Z,1520535062.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:02.412Z,1520535062.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:02.427Z,1520535062.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:02.804Z,1520535062.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:02.819Z,1520535062.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:03.188Z,1520535063.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:03.218Z,1520535063.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:03.595Z,1520535063.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:03.617Z,1520535063.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:03.999Z,1520535063.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:04.029Z,1520535064.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:04.388Z,1520535064.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:04.418Z,1520535064.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:04.813Z,1520535064.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:04.834Z,1520535064.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:05.212Z,1520535065.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:05.227Z,1520535065.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:05.608Z,1520535065.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:05.623Z,1520535065.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:05.999Z,1520535065.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:06.019Z,1520535066.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:06.387Z,1520535066.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:06.418Z,1520535066.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:06.803Z,1520535066.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:06.822Z,1520535066.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:07.202Z,1520535067.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:07.218Z,1520535067.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:07.612Z,1520535067.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:07.628Z,1520535067.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:08.009Z,1520535068.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:08.024Z,1520535068.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:08.409Z,1520535068.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:08.430Z,1520535068.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:08.803Z,1520535068.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:08.818Z,1520535068.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:09.185Z,1520535069.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:09.220Z,1520535069.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:09.599Z,1520535069.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:09.618Z,1520535069.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:10.000Z,1520535070.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:10.015Z,1520535070.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:10.403Z,1520535070.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:10.418Z,1520535070.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:10.421Z,1520535070.421 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T18:51:10.421Z,1520535070.421 [Default:CheckIn:C.Wait] Stopped
2018-03-08T18:51:10.421Z,1520535070.421 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T18:51:10.421Z,1520535070.421 [Default:CheckIn:D] Running Loop=1
2018-03-08T18:51:10.808Z,1520535070.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:10.824Z,1520535070.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:10.827Z,1520535070.827 [Default:CheckIn:D] Stopped
2018-03-08T18:51:10.827Z,1520535070.827 [Default:CheckIn:E] Running Loop=1
2018-03-08T18:51:13.917Z,1520535073.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:13.932Z,1520535073.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:13.935Z,1520535073.935 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 665.433724 min 
2018-03-08T18:51:13.936Z,1520535073.936 [Default:CheckIn:E] Stopped
2018-03-08T18:51:13.936Z,1520535073.936 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T18:51:13.936Z,1520535073.936 [Default:CheckIn] Stopped
2018-03-08T18:51:13.936Z,1520535073.936 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T18:51:13.936Z,1520535073.936 [Default:CheckIn](INFO): Running loop #65
2018-03-08T18:51:13.936Z,1520535073.936 [Default:CheckIn] Running Loop=65
2018-03-08T18:51:13.936Z,1520535073.936 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T18:51:13.936Z,1520535073.936 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T18:51:14.058Z,1520535074.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:14.094Z,1520535074.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:14.427Z,1520535074.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:14.467Z,1520535074.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:14.827Z,1520535074.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:14.843Z,1520535074.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:15.220Z,1520535075.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:15.235Z,1520535075.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:15.633Z,1520535075.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:15.669Z,1520535075.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:16.037Z,1520535076.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:16.070Z,1520535076.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:16.433Z,1520535076.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:16.465Z,1520535076.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:16.824Z,1520535076.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:16.839Z,1520535076.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:17.227Z,1520535077.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:17.243Z,1520535077.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:17.629Z,1520535077.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:17.645Z,1520535077.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:18.023Z,1520535078.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:18.043Z,1520535078.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:18.437Z,1520535078.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:18.461Z,1520535078.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:18.829Z,1520535078.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:18.845Z,1520535078.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:19.241Z,1520535079.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:19.273Z,1520535079.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:19.630Z,1520535079.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:19.646Z,1520535079.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:20.024Z,1520535080.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:20.039Z,1520535080.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:20.432Z,1520535080.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:20.454Z,1520535080.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:20.828Z,1520535080.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:20.844Z,1520535080.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:21.224Z,1520535081.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:21.239Z,1520535081.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:21.632Z,1520535081.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:21.655Z,1520535081.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:22.037Z,1520535082.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:22.052Z,1520535082.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:22.434Z,1520535082.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:22.450Z,1520535082.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:22.830Z,1520535082.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:22.845Z,1520535082.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:23.224Z,1520535083.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:23.239Z,1520535083.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:23.623Z,1520535083.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:23.639Z,1520535083.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:24.025Z,1520535084.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:24.040Z,1520535084.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:24.433Z,1520535084.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:24.449Z,1520535084.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:24.832Z,1520535084.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:24.847Z,1520535084.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:25.242Z,1520535085.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:25.257Z,1520535085.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:25.632Z,1520535085.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:25.647Z,1520535085.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:26.016Z,1520535086.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:26.046Z,1520535086.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:26.423Z,1520535086.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:26.445Z,1520535086.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:26.828Z,1520535086.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:26.843Z,1520535086.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:27.212Z,1520535087.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:27.240Z,1520535087.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:27.641Z,1520535087.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:27.657Z,1520535087.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:28.042Z,1520535088.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:28.057Z,1520535088.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:28.442Z,1520535088.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:28.457Z,1520535088.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:28.823Z,1520535088.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:28.849Z,1520535088.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:29.219Z,1520535089.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:29.247Z,1520535089.247 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:29.247Z,1520535089.247 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 222
2018-03-08T18:51:29.247Z,1520535089.247 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T18:51:29.249Z,1520535089.249 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:29.249Z,1520535089.249 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 222
2018-03-08T18:51:29.249Z,1520535089.249 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T18:51:29.251Z,1520535089.251 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:29.251Z,1520535089.251 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 222
2018-03-08T18:51:29.251Z,1520535089.251 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T18:51:29.262Z,1520535089.262 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T18:51:29.262Z,1520535089.262 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T18:51:29.263Z,1520535089.263 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T18:51:29.619Z,1520535089.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:29.665Z,1520535089.665 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T18:51:29.665Z,1520535089.665 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 222
2018-03-08T18:51:29.665Z,1520535089.665 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T18:51:29.665Z,1520535089.665 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 222
2018-03-08T18:51:29.666Z,1520535089.666 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T18:51:29.666Z,1520535089.666 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 222
2018-03-08T18:51:30.036Z,1520535090.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:30.057Z,1520535090.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T18:51:30.058Z,1520535090.058 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:51:30.058Z,1520535090.058 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:51:30.059Z,1520535090.059 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T18:51:30.059Z,1520535090.059 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:51:30.059Z,1520535090.059 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:51:30.060Z,1520535090.060 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T18:51:30.060Z,1520535090.060 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:51:30.060Z,1520535090.060 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:51:30.440Z,1520535090.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:30.471Z,1520535090.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T18:51:30.471Z,1520535090.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:30.837Z,1520535090.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:30.853Z,1520535090.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T18:51:30.854Z,1520535090.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:31.237Z,1520535091.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:31.252Z,1520535091.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T18:51:31.253Z,1520535091.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:31.619Z,1520535091.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:31.659Z,1520535091.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T18:51:31.660Z,1520535091.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:32.018Z,1520535092.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:32.050Z,1520535092.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T18:51:32.051Z,1520535092.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:32.419Z,1520535092.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:32.446Z,1520535092.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T18:51:32.447Z,1520535092.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:32.820Z,1520535092.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:32.835Z,1520535092.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T18:51:32.836Z,1520535092.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:33.214Z,1520535093.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:33.234Z,1520535093.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T18:51:33.235Z,1520535093.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:33.637Z,1520535093.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:33.670Z,1520535093.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T18:51:33.671Z,1520535093.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:34.034Z,1520535094.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:34.066Z,1520535094.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T18:51:34.067Z,1520535094.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:34.434Z,1520535094.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:34.461Z,1520535094.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T18:51:34.462Z,1520535094.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:34.827Z,1520535094.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:34.862Z,1520535094.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T18:51:34.863Z,1520535094.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:35.221Z,1520535095.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:35.236Z,1520535095.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T18:51:35.237Z,1520535095.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:35.624Z,1520535095.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:35.640Z,1520535095.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T18:51:35.641Z,1520535095.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:36.027Z,1520535096.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:36.043Z,1520535096.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T18:51:36.044Z,1520535096.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:36.441Z,1520535096.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:36.473Z,1520535096.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T18:51:36.474Z,1520535096.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:36.837Z,1520535096.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:36.869Z,1520535096.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T18:51:36.870Z,1520535096.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:37.241Z,1520535097.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:37.273Z,1520535097.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T18:51:37.274Z,1520535097.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:37.631Z,1520535097.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:37.645Z,1520535097.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T18:51:37.646Z,1520535097.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:38.024Z,1520535098.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:38.039Z,1520535098.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T18:51:38.040Z,1520535098.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:38.426Z,1520535098.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:38.446Z,1520535098.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T18:51:38.447Z,1520535098.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:38.831Z,1520535098.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:38.847Z,1520535098.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T18:51:38.848Z,1520535098.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:39.216Z,1520535099.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:39.239Z,1520535099.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T18:51:39.240Z,1520535099.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:39.636Z,1520535099.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:39.651Z,1520535099.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T18:51:39.653Z,1520535099.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:40.037Z,1520535100.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:40.052Z,1520535100.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T18:51:40.053Z,1520535100.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:40.436Z,1520535100.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:40.459Z,1520535100.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T18:51:40.460Z,1520535100.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:40.828Z,1520535100.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:40.842Z,1520535100.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T18:51:40.843Z,1520535100.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:41.227Z,1520535101.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:41.249Z,1520535101.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T18:51:41.250Z,1520535101.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:41.634Z,1520535101.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:41.649Z,1520535101.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T18:51:41.650Z,1520535101.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:42.027Z,1520535102.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:42.041Z,1520535102.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T18:51:42.042Z,1520535102.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:42.437Z,1520535102.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:42.452Z,1520535102.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T18:51:42.453Z,1520535102.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:42.837Z,1520535102.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:42.851Z,1520535102.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T18:51:42.853Z,1520535102.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:43.236Z,1520535103.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:43.258Z,1520535103.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T18:51:43.259Z,1520535103.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:43.631Z,1520535103.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:43.647Z,1520535103.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T18:51:43.648Z,1520535103.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:44.016Z,1520535104.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:44.050Z,1520535104.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T18:51:44.051Z,1520535104.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:44.431Z,1520535104.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:44.446Z,1520535104.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T18:51:44.447Z,1520535104.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:44.829Z,1520535104.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:44.843Z,1520535104.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T18:51:44.844Z,1520535104.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:45.212Z,1520535105.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:45.247Z,1520535105.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T18:51:45.248Z,1520535105.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:45.640Z,1520535105.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:45.663Z,1520535105.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T18:51:45.664Z,1520535105.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:46.045Z,1520535106.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:46.060Z,1520535106.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T18:51:46.061Z,1520535106.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:46.441Z,1520535106.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:46.462Z,1520535106.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T18:51:46.463Z,1520535106.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:46.830Z,1520535106.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:46.850Z,1520535106.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T18:51:46.851Z,1520535106.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:47.231Z,1520535107.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:47.246Z,1520535107.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T18:51:47.247Z,1520535107.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:47.615Z,1520535107.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:47.641Z,1520535107.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T18:51:47.642Z,1520535107.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:48.018Z,1520535108.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:48.050Z,1520535108.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T18:51:48.051Z,1520535108.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:48.443Z,1520535108.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:48.458Z,1520535108.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T18:51:48.459Z,1520535108.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:48.831Z,1520535108.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:48.850Z,1520535108.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T18:51:48.851Z,1520535108.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:49.239Z,1520535109.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:49.263Z,1520535109.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:49.622Z,1520535109.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:49.650Z,1520535109.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:50.013Z,1520535110.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:50.036Z,1520535110.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:50.422Z,1520535110.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:50.449Z,1520535110.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:50.815Z,1520535110.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:50.851Z,1520535110.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:51.217Z,1520535111.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:51.240Z,1520535111.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:51.629Z,1520535111.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:51.656Z,1520535111.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:52.042Z,1520535112.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:52.058Z,1520535112.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:52.441Z,1520535112.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:52.457Z,1520535112.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:52.819Z,1520535112.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:52.854Z,1520535112.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:53.219Z,1520535113.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:53.258Z,1520535113.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:53.617Z,1520535113.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:53.649Z,1520535113.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:54.022Z,1520535114.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:54.058Z,1520535114.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:54.433Z,1520535114.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:54.463Z,1520535114.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:54.825Z,1520535114.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:54.856Z,1520535114.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:55.233Z,1520535115.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:55.263Z,1520535115.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:55.619Z,1520535115.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:55.638Z,1520535115.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:56.014Z,1520535116.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:56.034Z,1520535116.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:56.429Z,1520535116.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:56.466Z,1520535116.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:56.833Z,1520535116.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:56.876Z,1520535116.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:57.225Z,1520535117.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:57.267Z,1520535117.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:57.651Z,1520535117.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:57.667Z,1520535117.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:57.680Z,1520535117.680 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T18:51:58.037Z,1520535118.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:58.063Z,1520535118.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:58.437Z,1520535118.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:58.462Z,1520535118.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:58.831Z,1520535118.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:58.865Z,1520535118.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:59.231Z,1520535119.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:59.267Z,1520535119.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:51:59.625Z,1520535119.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:51:59.640Z,1520535119.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:00.031Z,1520535120.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:00.066Z,1520535120.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:00.437Z,1520535120.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:00.473Z,1520535120.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:00.825Z,1520535120.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:00.841Z,1520535120.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:01.241Z,1520535121.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:01.272Z,1520535121.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:01.627Z,1520535121.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:01.643Z,1520535121.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:02.026Z,1520535122.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:02.041Z,1520535122.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:02.426Z,1520535122.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:02.441Z,1520535122.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:02.824Z,1520535122.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:02.859Z,1520535122.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:03.219Z,1520535123.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:03.242Z,1520535123.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:03.636Z,1520535123.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:03.652Z,1520535123.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:04.037Z,1520535124.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:04.052Z,1520535124.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:04.436Z,1520535124.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:04.451Z,1520535124.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:04.827Z,1520535124.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:04.850Z,1520535124.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:05.231Z,1520535125.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:05.247Z,1520535125.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:05.632Z,1520535125.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:05.647Z,1520535125.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:06.027Z,1520535126.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:06.042Z,1520535126.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:06.437Z,1520535126.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:06.452Z,1520535126.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:06.837Z,1520535126.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:06.853Z,1520535126.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:07.236Z,1520535127.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:07.258Z,1520535127.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:07.633Z,1520535127.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:07.649Z,1520535127.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:08.027Z,1520535128.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:08.042Z,1520535128.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:08.432Z,1520535128.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:08.455Z,1520535128.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:08.833Z,1520535128.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:08.849Z,1520535128.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:09.219Z,1520535129.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:09.241Z,1520535129.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:09.638Z,1520535129.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:09.654Z,1520535129.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:10.037Z,1520535130.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:10.053Z,1520535130.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:10.437Z,1520535130.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:10.452Z,1520535130.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:10.833Z,1520535130.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:10.848Z,1520535130.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:13.935Z,1520535133.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:13.950Z,1520535133.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:14.045Z,1520535134.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:14.090Z,1520535134.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:14.420Z,1520535134.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:14.436Z,1520535134.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:14.819Z,1520535134.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:14.834Z,1520535134.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:15.222Z,1520535135.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:15.237Z,1520535135.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:15.607Z,1520535135.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:15.631Z,1520535135.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:16.000Z,1520535136.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:16.033Z,1520535136.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:16.398Z,1520535136.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:16.434Z,1520535136.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:16.820Z,1520535136.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:16.835Z,1520535136.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:17.219Z,1520535137.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:17.235Z,1520535137.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:17.618Z,1520535137.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:17.633Z,1520535137.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:18.006Z,1520535138.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:18.035Z,1520535138.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:18.398Z,1520535138.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:18.432Z,1520535138.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:18.803Z,1520535138.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:18.839Z,1520535138.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:19.202Z,1520535139.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:19.233Z,1520535139.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:19.619Z,1520535139.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:19.634Z,1520535139.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:20.024Z,1520535140.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:20.039Z,1520535140.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:20.413Z,1520535140.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:20.436Z,1520535140.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:20.800Z,1520535140.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:20.838Z,1520535140.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:21.195Z,1520535141.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:21.211Z,1520535141.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:21.602Z,1520535141.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:21.618Z,1520535141.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:22.004Z,1520535142.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:22.019Z,1520535142.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:22.395Z,1520535142.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:22.411Z,1520535142.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:22.813Z,1520535142.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:22.849Z,1520535142.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:23.217Z,1520535143.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:23.249Z,1520535143.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:23.617Z,1520535143.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:23.648Z,1520535143.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:24.001Z,1520535144.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:24.017Z,1520535144.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:24.403Z,1520535144.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:24.418Z,1520535144.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:24.805Z,1520535144.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:24.820Z,1520535144.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:25.200Z,1520535145.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:25.215Z,1520535145.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:25.617Z,1520535145.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:25.649Z,1520535145.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:26.017Z,1520535146.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:26.049Z,1520535146.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:26.417Z,1520535146.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:26.448Z,1520535146.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:26.802Z,1520535146.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:26.817Z,1520535146.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:27.204Z,1520535147.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:27.219Z,1520535147.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:27.604Z,1520535147.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:27.619Z,1520535147.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:28.004Z,1520535148.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:28.019Z,1520535148.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:28.400Z,1520535148.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:28.415Z,1520535148.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:28.810Z,1520535148.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:28.825Z,1520535148.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:29.217Z,1520535149.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:29.249Z,1520535149.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:29.609Z,1520535149.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:29.625Z,1520535149.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:30.004Z,1520535150.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:30.020Z,1520535150.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:30.404Z,1520535150.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:30.418Z,1520535150.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:30.835Z,1520535150.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:30.855Z,1520535150.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:31.202Z,1520535151.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:31.217Z,1520535151.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:31.609Z,1520535151.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:31.624Z,1520535151.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:32.017Z,1520535152.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:32.048Z,1520535152.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:32.417Z,1520535152.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:32.448Z,1520535152.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:32.803Z,1520535152.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:32.818Z,1520535152.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:33.202Z,1520535153.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:33.217Z,1520535153.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:33.604Z,1520535153.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:33.619Z,1520535153.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:34.004Z,1520535154.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:34.019Z,1520535154.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:34.404Z,1520535154.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:34.419Z,1520535154.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:34.817Z,1520535154.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:34.848Z,1520535154.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:35.209Z,1520535155.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:35.224Z,1520535155.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:35.617Z,1520535155.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:35.647Z,1520535155.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:36.002Z,1520535156.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:36.017Z,1520535156.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:36.404Z,1520535156.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:36.419Z,1520535156.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:36.804Z,1520535156.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:36.819Z,1520535156.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:37.204Z,1520535157.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:37.219Z,1520535157.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:37.617Z,1520535157.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:37.650Z,1520535157.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:38.017Z,1520535158.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:38.048Z,1520535158.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:38.406Z,1520535158.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:38.421Z,1520535158.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:38.803Z,1520535158.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:38.818Z,1520535158.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:39.204Z,1520535159.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:39.219Z,1520535159.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:39.602Z,1520535159.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:39.617Z,1520535159.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:40.004Z,1520535160.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:40.019Z,1520535160.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:40.404Z,1520535160.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:40.420Z,1520535160.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:40.817Z,1520535160.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:40.848Z,1520535160.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:41.208Z,1520535161.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:41.223Z,1520535161.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:41.605Z,1520535161.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:41.621Z,1520535161.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:42.004Z,1520535162.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:42.026Z,1520535162.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:42.403Z,1520535162.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:42.418Z,1520535162.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:42.805Z,1520535162.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:42.821Z,1520535162.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:43.203Z,1520535163.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:43.219Z,1520535163.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:43.609Z,1520535163.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:43.624Z,1520535163.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:44.017Z,1520535164.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:44.032Z,1520535164.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:44.409Z,1520535164.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:44.424Z,1520535164.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:44.805Z,1520535164.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:44.820Z,1520535164.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:45.200Z,1520535165.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:45.216Z,1520535165.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:45.608Z,1520535165.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:45.630Z,1520535165.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:46.011Z,1520535166.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:46.026Z,1520535166.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:46.408Z,1520535166.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:46.423Z,1520535166.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:46.812Z,1520535166.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:46.828Z,1520535166.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:47.213Z,1520535167.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:47.228Z,1520535167.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:47.613Z,1520535167.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:47.628Z,1520535167.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:48.008Z,1520535168.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:48.024Z,1520535168.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:48.406Z,1520535168.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:48.422Z,1520535168.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:48.809Z,1520535168.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:48.825Z,1520535168.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:49.203Z,1520535169.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:49.218Z,1520535169.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:49.612Z,1520535169.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:49.629Z,1520535169.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:50.014Z,1520535170.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:50.030Z,1520535170.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:50.413Z,1520535170.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:50.428Z,1520535170.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:50.810Z,1520535170.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:50.825Z,1520535170.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:51.196Z,1520535171.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:51.223Z,1520535171.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:51.609Z,1520535171.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:51.628Z,1520535171.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:52.009Z,1520535172.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:52.024Z,1520535172.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:52.404Z,1520535172.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:52.419Z,1520535172.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:52.810Z,1520535172.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:52.833Z,1520535172.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:53.221Z,1520535173.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:53.235Z,1520535173.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:53.609Z,1520535173.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:53.637Z,1520535173.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:53.999Z,1520535173.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:54.026Z,1520535174.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:54.395Z,1520535174.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:54.428Z,1520535174.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:54.798Z,1520535174.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:54.834Z,1520535174.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:55.195Z,1520535175.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:55.227Z,1520535175.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:55.620Z,1520535175.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:55.635Z,1520535175.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:56.005Z,1520535176.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:56.038Z,1520535176.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:56.417Z,1520535176.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:56.433Z,1520535176.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:56.795Z,1520535176.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:56.832Z,1520535176.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:57.190Z,1520535177.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:57.230Z,1520535177.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:57.595Z,1520535177.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:57.631Z,1520535177.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:58.000Z,1520535178.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:58.015Z,1520535178.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:58.398Z,1520535178.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:58.414Z,1520535178.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:58.813Z,1520535178.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:58.843Z,1520535178.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:59.213Z,1520535179.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:59.239Z,1520535179.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:52:59.610Z,1520535179.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:52:59.641Z,1520535179.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:00.007Z,1520535180.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:00.040Z,1520535180.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:00.403Z,1520535180.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:00.418Z,1520535180.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:00.802Z,1520535180.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:00.839Z,1520535180.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:01.206Z,1520535181.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:01.221Z,1520535181.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:01.613Z,1520535181.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:01.637Z,1520535181.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:02.005Z,1520535182.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:02.021Z,1520535182.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:02.417Z,1520535182.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:02.432Z,1520535182.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:02.806Z,1520535182.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:02.821Z,1520535182.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:03.199Z,1520535183.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:03.227Z,1520535183.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:03.607Z,1520535183.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:03.626Z,1520535183.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:04.003Z,1520535184.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:04.018Z,1520535184.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:04.408Z,1520535184.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:04.423Z,1520535184.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:04.812Z,1520535184.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:04.827Z,1520535184.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:05.213Z,1520535185.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:05.228Z,1520535185.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:05.612Z,1520535185.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:05.634Z,1520535185.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:06.007Z,1520535186.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:06.026Z,1520535186.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:06.403Z,1520535186.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:06.419Z,1520535186.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:06.803Z,1520535186.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:06.821Z,1520535186.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:07.206Z,1520535187.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:07.221Z,1520535187.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:07.613Z,1520535187.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:07.634Z,1520535187.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:08.008Z,1520535188.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:08.024Z,1520535188.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:08.412Z,1520535188.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:08.427Z,1520535188.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:08.805Z,1520535188.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:08.834Z,1520535188.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:09.204Z,1520535189.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:09.227Z,1520535189.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:09.604Z,1520535189.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:09.619Z,1520535189.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:10.005Z,1520535190.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:10.020Z,1520535190.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:10.403Z,1520535190.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:10.418Z,1520535190.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:10.812Z,1520535190.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:10.827Z,1520535190.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:11.214Z,1520535191.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:11.229Z,1520535191.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:14.321Z,1520535194.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:14.337Z,1520535194.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:14.437Z,1520535194.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:14.463Z,1520535194.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:14.820Z,1520535194.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:14.835Z,1520535194.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:15.217Z,1520535195.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:15.233Z,1520535195.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:15.620Z,1520535195.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:15.635Z,1520535195.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:16.022Z,1520535196.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:16.037Z,1520535196.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:16.414Z,1520535196.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:16.434Z,1520535196.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:16.829Z,1520535196.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:16.857Z,1520535196.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:17.233Z,1520535197.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:17.248Z,1520535197.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:17.623Z,1520535197.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:17.639Z,1520535197.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:18.020Z,1520535198.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:18.042Z,1520535198.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:18.423Z,1520535198.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:18.439Z,1520535198.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:18.823Z,1520535198.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:18.839Z,1520535198.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:19.222Z,1520535199.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:19.237Z,1520535199.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:19.625Z,1520535199.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:19.641Z,1520535199.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:20.029Z,1520535200.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:20.050Z,1520535200.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:20.424Z,1520535200.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:20.446Z,1520535200.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:20.824Z,1520535200.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:20.839Z,1520535200.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:21.222Z,1520535201.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:21.237Z,1520535201.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:21.619Z,1520535201.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:21.634Z,1520535201.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:22.019Z,1520535202.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:22.038Z,1520535202.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:22.423Z,1520535202.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:22.438Z,1520535202.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:22.825Z,1520535202.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:22.841Z,1520535202.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:23.225Z,1520535203.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:23.240Z,1520535203.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:23.626Z,1520535203.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:23.641Z,1520535203.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:24.019Z,1520535204.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:24.034Z,1520535204.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:24.422Z,1520535204.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:24.442Z,1520535204.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:24.825Z,1520535204.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:24.841Z,1520535204.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:25.217Z,1520535205.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:25.237Z,1520535205.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:25.629Z,1520535205.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:25.645Z,1520535205.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:26.026Z,1520535206.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:26.041Z,1520535206.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:26.426Z,1520535206.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:26.441Z,1520535206.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:26.832Z,1520535206.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:26.893Z,1520535206.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:27.223Z,1520535207.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:27.238Z,1520535207.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:27.620Z,1520535207.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:27.636Z,1520535207.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:28.021Z,1520535208.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:28.037Z,1520535208.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:28.419Z,1520535208.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:28.435Z,1520535208.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:28.894Z,1520535208.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:28.929Z,1520535208.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:29.225Z,1520535209.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:29.241Z,1520535209.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:29.625Z,1520535209.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:29.647Z,1520535209.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:30.019Z,1520535210.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:30.034Z,1520535210.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:30.417Z,1520535210.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:30.439Z,1520535210.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:30.820Z,1520535210.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:30.835Z,1520535210.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:31.223Z,1520535211.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:31.238Z,1520535211.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:31.630Z,1520535211.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:31.645Z,1520535211.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:32.029Z,1520535212.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:32.045Z,1520535212.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:32.429Z,1520535212.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:32.444Z,1520535212.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:32.819Z,1520535212.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:32.839Z,1520535212.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:33.219Z,1520535213.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:33.234Z,1520535213.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:33.623Z,1520535213.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:33.638Z,1520535213.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:34.026Z,1520535214.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:34.041Z,1520535214.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:34.425Z,1520535214.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:34.440Z,1520535214.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:34.828Z,1520535214.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:34.843Z,1520535214.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:35.230Z,1520535215.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:35.245Z,1520535215.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:35.629Z,1520535215.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:35.644Z,1520535215.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:36.023Z,1520535216.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:36.039Z,1520535216.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:36.425Z,1520535216.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:36.441Z,1520535216.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:36.823Z,1520535216.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:36.839Z,1520535216.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:37.219Z,1520535217.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:37.234Z,1520535217.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:37.629Z,1520535217.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:37.645Z,1520535217.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:38.029Z,1520535218.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:38.045Z,1520535218.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:38.428Z,1520535218.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:38.444Z,1520535218.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:38.820Z,1520535218.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:38.835Z,1520535218.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:39.222Z,1520535219.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:39.238Z,1520535219.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:39.618Z,1520535219.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:39.634Z,1520535219.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:40.016Z,1520535220.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:40.043Z,1520535220.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:40.423Z,1520535220.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:40.438Z,1520535220.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:40.832Z,1520535220.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:40.848Z,1520535220.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:41.234Z,1520535221.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:41.249Z,1520535221.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:41.629Z,1520535221.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:41.644Z,1520535221.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:42.023Z,1520535222.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:42.038Z,1520535222.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:42.423Z,1520535222.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:42.446Z,1520535222.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:42.824Z,1520535222.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:42.846Z,1520535222.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:43.222Z,1520535223.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:43.238Z,1520535223.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:43.633Z,1520535223.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:43.648Z,1520535223.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:44.032Z,1520535224.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:44.047Z,1520535224.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:44.432Z,1520535224.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:44.447Z,1520535224.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:44.824Z,1520535224.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:44.839Z,1520535224.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:45.237Z,1520535225.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:45.252Z,1520535225.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:45.622Z,1520535225.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:45.638Z,1520535225.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:46.019Z,1520535226.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:46.040Z,1520535226.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:46.414Z,1520535226.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:46.447Z,1520535226.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:46.833Z,1520535226.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:46.848Z,1520535226.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:47.233Z,1520535227.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:47.255Z,1520535227.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:47.632Z,1520535227.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:47.654Z,1520535227.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:48.017Z,1520535228.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:48.037Z,1520535228.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:48.415Z,1520535228.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:48.438Z,1520535228.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:48.819Z,1520535228.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:48.840Z,1520535228.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:49.219Z,1520535229.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:49.234Z,1520535229.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:49.634Z,1520535229.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:49.649Z,1520535229.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:50.032Z,1520535230.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:50.054Z,1520535230.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:50.432Z,1520535230.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:50.447Z,1520535230.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:50.817Z,1520535230.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:50.846Z,1520535230.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:51.224Z,1520535231.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:51.239Z,1520535231.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:51.610Z,1520535231.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:51.637Z,1520535231.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:52.012Z,1520535232.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:52.044Z,1520535232.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:52.411Z,1520535232.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:52.448Z,1520535232.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:52.833Z,1520535232.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:52.855Z,1520535232.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:53.237Z,1520535233.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:53.252Z,1520535233.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:53.636Z,1520535233.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:53.652Z,1520535233.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:54.010Z,1520535234.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:54.037Z,1520535234.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:54.411Z,1520535234.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:54.438Z,1520535234.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:54.814Z,1520535234.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:54.842Z,1520535234.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:55.207Z,1520535235.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:55.238Z,1520535235.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:55.635Z,1520535235.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:55.651Z,1520535235.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:56.037Z,1520535236.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:56.052Z,1520535236.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:56.433Z,1520535236.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:56.449Z,1520535236.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:56.811Z,1520535236.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:56.838Z,1520535236.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:57.207Z,1520535237.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:57.243Z,1520535237.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:57.610Z,1520535237.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:57.638Z,1520535237.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:58.012Z,1520535238.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:58.051Z,1520535238.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:58.414Z,1520535238.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:58.446Z,1520535238.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:58.830Z,1520535238.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:58.845Z,1520535238.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:59.234Z,1520535239.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:59.249Z,1520535239.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:53:59.617Z,1520535239.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:53:59.655Z,1520535239.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:00.019Z,1520535240.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:00.048Z,1520535240.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:00.420Z,1520535240.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:00.450Z,1520535240.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:00.817Z,1520535240.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:00.843Z,1520535240.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:01.218Z,1520535241.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:01.246Z,1520535241.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:01.633Z,1520535241.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:01.662Z,1520535241.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:02.029Z,1520535242.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:02.054Z,1520535242.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:02.429Z,1520535242.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:02.455Z,1520535242.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:02.815Z,1520535242.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:02.854Z,1520535242.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:03.219Z,1520535243.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:03.235Z,1520535243.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:03.616Z,1520535243.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:03.631Z,1520535243.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:04.021Z,1520535244.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:04.036Z,1520535244.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:04.418Z,1520535244.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:04.438Z,1520535244.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:04.834Z,1520535244.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:04.865Z,1520535244.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:05.230Z,1520535245.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:05.245Z,1520535245.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:05.626Z,1520535245.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:05.642Z,1520535245.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:06.019Z,1520535246.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:06.035Z,1520535246.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:06.422Z,1520535246.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:06.438Z,1520535246.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:06.818Z,1520535246.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:06.841Z,1520535246.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:07.222Z,1520535247.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:07.238Z,1520535247.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:07.629Z,1520535247.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:07.651Z,1520535247.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:08.029Z,1520535248.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:08.045Z,1520535248.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:08.428Z,1520535248.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:08.451Z,1520535248.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:08.823Z,1520535248.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:08.838Z,1520535248.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:09.219Z,1520535249.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:09.235Z,1520535249.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:09.620Z,1520535249.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:09.635Z,1520535249.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:10.022Z,1520535250.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:10.037Z,1520535250.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:10.419Z,1520535250.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:10.438Z,1520535250.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:10.833Z,1520535250.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:10.854Z,1520535250.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:11.233Z,1520535251.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:11.254Z,1520535251.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:14.329Z,1520535254.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:14.345Z,1520535254.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:14.443Z,1520535254.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:14.482Z,1520535254.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:14.823Z,1520535254.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:14.838Z,1520535254.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:15.219Z,1520535255.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:15.235Z,1520535255.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:15.619Z,1520535255.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:15.656Z,1520535255.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:16.023Z,1520535256.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:16.046Z,1520535256.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:16.423Z,1520535256.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:16.439Z,1520535256.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:16.788Z,1520535256.788 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T18:54:16.788Z,1520535256.788 [NAL9602] Data Fault, FailCount= 2
2018-03-08T18:54:16.788Z,1520535256.788 [NAL9602](ERROR): Data Fault
2018-03-08T18:54:16.805Z,1520535256.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:16.842Z,1520535256.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:16.863Z,1520535256.863 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T18:54:17.198Z,1520535257.198 [NAL9602](INFO): Powering down
2018-03-08T18:54:17.215Z,1520535257.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:17.257Z,1520535257.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:17.614Z,1520535257.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:17.641Z,1520535257.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:18.008Z,1520535258.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:18.042Z,1520535258.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:18.056Z,1520535258.056 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T18:54:18.056Z,1520535258.056 [NAL9602] No Fault, FailCount= 2
2018-03-08T18:54:18.410Z,1520535258.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:18.435Z,1520535258.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:18.814Z,1520535258.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:18.842Z,1520535258.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:19.204Z,1520535259.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:19.227Z,1520535259.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:19.614Z,1520535259.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:19.640Z,1520535259.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:20.012Z,1520535260.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:20.042Z,1520535260.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:20.408Z,1520535260.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:20.439Z,1520535260.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:20.814Z,1520535260.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:20.847Z,1520535260.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:21.214Z,1520535261.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:21.247Z,1520535261.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:21.609Z,1520535261.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:21.624Z,1520535261.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:22.010Z,1520535262.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:22.025Z,1520535262.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:22.412Z,1520535262.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:22.427Z,1520535262.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:22.806Z,1520535262.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:22.821Z,1520535262.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:23.215Z,1520535263.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:23.253Z,1520535263.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:23.612Z,1520535263.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:23.628Z,1520535263.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:24.007Z,1520535264.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:24.022Z,1520535264.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:24.411Z,1520535264.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:24.426Z,1520535264.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:24.812Z,1520535264.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:24.828Z,1520535264.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:25.211Z,1520535265.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:25.226Z,1520535265.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:25.618Z,1520535265.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:25.634Z,1520535265.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:26.017Z,1520535266.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:26.055Z,1520535266.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:26.412Z,1520535266.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:26.427Z,1520535266.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:26.815Z,1520535266.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:26.830Z,1520535266.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:27.219Z,1520535267.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:27.254Z,1520535267.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:27.611Z,1520535267.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:27.626Z,1520535267.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:28.015Z,1520535268.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:28.029Z,1520535268.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:28.419Z,1520535268.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:28.438Z,1520535268.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:28.812Z,1520535268.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:28.827Z,1520535268.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:29.219Z,1520535269.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:29.234Z,1520535269.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:29.615Z,1520535269.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:29.631Z,1520535269.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:30.017Z,1520535270.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:30.033Z,1520535270.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:30.419Z,1520535270.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:30.434Z,1520535270.434 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:30.435Z,1520535270.435 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 223
2018-03-08T18:54:30.435Z,1520535270.435 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T18:54:30.436Z,1520535270.436 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:30.437Z,1520535270.437 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 223
2018-03-08T18:54:30.437Z,1520535270.437 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T18:54:30.438Z,1520535270.438 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:30.438Z,1520535270.438 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 223
2018-03-08T18:54:30.438Z,1520535270.438 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T18:54:30.483Z,1520535270.483 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T18:54:30.483Z,1520535270.483 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T18:54:30.483Z,1520535270.483 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T18:54:30.815Z,1520535270.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:30.865Z,1520535270.865 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T18:54:30.865Z,1520535270.865 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 223
2018-03-08T18:54:30.865Z,1520535270.865 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T18:54:30.865Z,1520535270.865 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 223
2018-03-08T18:54:30.866Z,1520535270.866 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T18:54:30.866Z,1520535270.866 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 223
2018-03-08T18:54:31.216Z,1520535271.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:31.230Z,1520535271.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T18:54:31.231Z,1520535271.231 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:54:31.231Z,1520535271.231 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:54:31.232Z,1520535271.232 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T18:54:31.232Z,1520535271.232 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:54:31.233Z,1520535271.233 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:54:31.233Z,1520535271.233 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T18:54:31.233Z,1520535271.233 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:54:31.234Z,1520535271.234 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:54:31.618Z,1520535271.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:31.633Z,1520535271.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T18:54:31.633Z,1520535271.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:32.021Z,1520535272.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:32.042Z,1520535272.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T18:54:32.043Z,1520535272.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:32.422Z,1520535272.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:32.437Z,1520535272.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T18:54:32.438Z,1520535272.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:32.818Z,1520535272.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:32.832Z,1520535272.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T18:54:32.833Z,1520535272.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:33.228Z,1520535273.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:33.243Z,1520535273.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T18:54:33.244Z,1520535273.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:33.618Z,1520535273.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:33.633Z,1520535273.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T18:54:33.634Z,1520535273.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:34.015Z,1520535274.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:34.041Z,1520535274.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T18:54:34.042Z,1520535274.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:34.423Z,1520535274.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:34.438Z,1520535274.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T18:54:34.439Z,1520535274.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:34.818Z,1520535274.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:34.833Z,1520535274.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T18:54:34.834Z,1520535274.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:35.218Z,1520535275.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:35.233Z,1520535275.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T18:54:35.234Z,1520535275.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:35.622Z,1520535275.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:35.642Z,1520535275.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T18:54:35.643Z,1520535275.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:36.010Z,1520535276.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:36.034Z,1520535276.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T18:54:36.035Z,1520535276.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:36.420Z,1520535276.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:36.434Z,1520535276.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T18:54:36.435Z,1520535276.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:36.820Z,1520535276.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:36.835Z,1520535276.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T18:54:36.836Z,1520535276.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:37.219Z,1520535277.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:37.234Z,1520535277.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T18:54:37.235Z,1520535277.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:37.619Z,1520535277.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:37.633Z,1520535277.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T18:54:37.634Z,1520535277.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:38.016Z,1520535278.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:38.036Z,1520535278.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T18:54:38.037Z,1520535278.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:38.418Z,1520535278.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:38.433Z,1520535278.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T18:54:38.434Z,1520535278.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:38.814Z,1520535278.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:38.845Z,1520535278.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T18:54:38.846Z,1520535278.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:39.213Z,1520535279.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:39.241Z,1520535279.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T18:54:39.242Z,1520535279.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:39.623Z,1520535279.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:39.638Z,1520535279.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T18:54:39.639Z,1520535279.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:40.014Z,1520535280.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:40.046Z,1520535280.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T18:54:40.047Z,1520535280.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:40.423Z,1520535280.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:40.439Z,1520535280.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T18:54:40.440Z,1520535280.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:40.817Z,1520535280.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:40.838Z,1520535280.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T18:54:40.839Z,1520535280.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:41.218Z,1520535281.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:41.238Z,1520535281.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T18:54:41.239Z,1520535281.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:41.608Z,1520535281.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:41.635Z,1520535281.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T18:54:41.636Z,1520535281.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:42.014Z,1520535282.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:42.041Z,1520535282.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T18:54:42.042Z,1520535282.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:42.410Z,1520535282.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:42.442Z,1520535282.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T18:54:42.443Z,1520535282.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:42.808Z,1520535282.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:42.844Z,1520535282.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T18:54:42.845Z,1520535282.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:43.214Z,1520535283.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:43.246Z,1520535283.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T18:54:43.247Z,1520535283.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:43.610Z,1520535283.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:43.646Z,1520535283.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T18:54:43.647Z,1520535283.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:44.008Z,1520535284.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:44.022Z,1520535284.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T18:54:44.023Z,1520535284.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:44.410Z,1520535284.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:44.425Z,1520535284.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T18:54:44.426Z,1520535284.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:44.815Z,1520535284.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:44.831Z,1520535284.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T18:54:44.831Z,1520535284.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:45.211Z,1520535285.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:45.225Z,1520535285.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T18:54:45.226Z,1520535285.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:45.618Z,1520535285.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:45.649Z,1520535285.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T18:54:45.650Z,1520535285.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:46.018Z,1520535286.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:46.032Z,1520535286.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T18:54:46.033Z,1520535286.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:46.411Z,1520535286.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:46.426Z,1520535286.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T18:54:46.427Z,1520535286.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:46.818Z,1520535286.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:46.833Z,1520535286.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T18:54:46.834Z,1520535286.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:47.199Z,1520535287.199 [NAL9602](INFO): Powering up NAL9602
2018-03-08T18:54:47.216Z,1520535287.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:47.238Z,1520535287.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T18:54:47.239Z,1520535287.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:47.613Z,1520535287.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:47.627Z,1520535287.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T18:54:47.628Z,1520535287.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:48.019Z,1520535288.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:48.034Z,1520535288.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T18:54:48.035Z,1520535288.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:48.416Z,1520535288.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:48.438Z,1520535288.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T18:54:48.439Z,1520535288.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:48.815Z,1520535288.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:48.830Z,1520535288.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T18:54:48.831Z,1520535288.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:49.218Z,1520535289.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:49.232Z,1520535289.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T18:54:49.233Z,1520535289.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:49.616Z,1520535289.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:49.642Z,1520535289.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T18:54:49.643Z,1520535289.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:50.015Z,1520535290.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:50.030Z,1520535290.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T18:54:50.031Z,1520535290.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:50.420Z,1520535290.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:50.435Z,1520535290.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:50.820Z,1520535290.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:50.834Z,1520535290.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:51.218Z,1520535291.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:51.262Z,1520535291.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:51.615Z,1520535291.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:51.631Z,1520535291.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:52.019Z,1520535292.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:52.034Z,1520535292.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:52.416Z,1520535292.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:52.431Z,1520535292.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:52.819Z,1520535292.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:52.835Z,1520535292.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:53.215Z,1520535293.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:53.240Z,1520535293.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:53.615Z,1520535293.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:53.630Z,1520535293.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:54.017Z,1520535294.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:54.032Z,1520535294.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:54.417Z,1520535294.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:54.433Z,1520535294.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:54.815Z,1520535294.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:54.830Z,1520535294.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:55.219Z,1520535295.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:55.235Z,1520535295.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:55.619Z,1520535295.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:55.634Z,1520535295.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:56.015Z,1520535296.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:56.030Z,1520535296.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:56.417Z,1520535296.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:56.433Z,1520535296.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:56.819Z,1520535296.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:56.834Z,1520535296.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:57.212Z,1520535297.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:57.227Z,1520535297.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:57.619Z,1520535297.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:57.634Z,1520535297.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:58.021Z,1520535298.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:58.036Z,1520535298.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:58.403Z,1520535298.403 [NAL9602](INFO): NAL9602 initialized
2018-03-08T18:54:58.420Z,1520535298.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:58.435Z,1520535298.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:58.818Z,1520535298.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:58.833Z,1520535298.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:59.226Z,1520535299.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:59.241Z,1520535299.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:54:59.633Z,1520535299.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:54:59.648Z,1520535299.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:00.025Z,1520535300.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:00.041Z,1520535300.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:00.417Z,1520535300.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:00.444Z,1520535300.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:00.808Z,1520535300.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:00.840Z,1520535300.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:01.224Z,1520535301.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:01.239Z,1520535301.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:01.611Z,1520535301.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:01.637Z,1520535301.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:02.025Z,1520535302.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:02.053Z,1520535302.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:02.437Z,1520535302.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:02.452Z,1520535302.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:02.834Z,1520535302.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:02.854Z,1520535302.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:03.214Z,1520535303.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:03.241Z,1520535303.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:03.611Z,1520535303.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:03.642Z,1520535303.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:04.032Z,1520535304.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:04.052Z,1520535304.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:04.437Z,1520535304.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:04.458Z,1520535304.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:04.834Z,1520535304.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:04.849Z,1520535304.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:05.211Z,1520535305.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:05.246Z,1520535305.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:05.604Z,1520535305.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:05.628Z,1520535305.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:06.029Z,1520535306.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:06.045Z,1520535306.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:06.431Z,1520535306.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:06.451Z,1520535306.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:06.825Z,1520535306.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:06.857Z,1520535306.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:07.215Z,1520535307.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:07.246Z,1520535307.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:07.611Z,1520535307.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:07.642Z,1520535307.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:08.021Z,1520535308.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:08.048Z,1520535308.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:08.425Z,1520535308.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:08.459Z,1520535308.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:08.839Z,1520535308.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:08.855Z,1520535308.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:09.215Z,1520535309.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:09.251Z,1520535309.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:09.614Z,1520535309.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:09.646Z,1520535309.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:10.025Z,1520535310.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:10.050Z,1520535310.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:10.429Z,1520535310.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:10.452Z,1520535310.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:10.839Z,1520535310.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:10.855Z,1520535310.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:11.220Z,1520535311.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:11.251Z,1520535311.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:14.316Z,1520535314.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:14.332Z,1520535314.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:14.455Z,1520535314.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:14.491Z,1520535314.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:14.829Z,1520535314.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:14.861Z,1520535314.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:15.217Z,1520535315.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:15.233Z,1520535315.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:15.616Z,1520535315.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:15.631Z,1520535315.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:16.012Z,1520535316.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:16.028Z,1520535316.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:16.413Z,1520535316.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:16.429Z,1520535316.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:16.816Z,1520535316.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:16.831Z,1520535316.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:17.218Z,1520535317.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:17.238Z,1520535317.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:17.621Z,1520535317.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:17.637Z,1520535317.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:18.018Z,1520535318.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:18.033Z,1520535318.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:18.417Z,1520535318.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:18.432Z,1520535318.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:18.815Z,1520535318.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:18.830Z,1520535318.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:19.212Z,1520535319.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:19.227Z,1520535319.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:19.612Z,1520535319.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:19.628Z,1520535319.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:20.021Z,1520535320.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:20.042Z,1520535320.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:20.421Z,1520535320.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:20.438Z,1520535320.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:20.821Z,1520535320.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:20.839Z,1520535320.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:21.213Z,1520535321.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:21.228Z,1520535321.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:21.598Z,1520535321.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:21.631Z,1520535321.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:22.025Z,1520535322.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:22.047Z,1520535322.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:22.424Z,1520535322.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:22.447Z,1520535322.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:22.825Z,1520535322.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:22.840Z,1520535322.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:23.218Z,1520535323.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:23.233Z,1520535323.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:23.599Z,1520535323.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:23.626Z,1520535323.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:24.015Z,1520535324.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:24.031Z,1520535324.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:24.424Z,1520535324.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:24.447Z,1520535324.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:24.829Z,1520535324.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:24.847Z,1520535324.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:25.207Z,1520535325.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:25.235Z,1520535325.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:25.603Z,1520535325.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:25.631Z,1520535325.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:26.022Z,1520535326.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:26.038Z,1520535326.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:26.425Z,1520535326.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:26.440Z,1520535326.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:26.826Z,1520535326.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:26.846Z,1520535326.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:27.208Z,1520535327.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:27.236Z,1520535327.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:27.599Z,1520535327.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:27.634Z,1520535327.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:28.027Z,1520535328.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:28.043Z,1520535328.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:28.429Z,1520535328.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:28.445Z,1520535328.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:28.817Z,1520535328.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:28.836Z,1520535328.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:29.204Z,1520535329.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:29.244Z,1520535329.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:29.607Z,1520535329.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:29.634Z,1520535329.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:30.022Z,1520535330.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:30.038Z,1520535330.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:30.426Z,1520535330.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:30.442Z,1520535330.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:30.829Z,1520535330.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:30.845Z,1520535330.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:31.199Z,1520535331.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:31.227Z,1520535331.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:31.607Z,1520535331.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:31.634Z,1520535331.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:32.021Z,1520535332.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:32.042Z,1520535332.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:32.422Z,1520535332.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:32.437Z,1520535332.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:32.830Z,1520535332.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:32.850Z,1520535332.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:33.207Z,1520535333.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:33.235Z,1520535333.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:33.599Z,1520535333.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:33.626Z,1520535333.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:34.029Z,1520535334.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:34.046Z,1520535334.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:34.413Z,1520535334.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:34.447Z,1520535334.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:34.826Z,1520535334.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:34.841Z,1520535334.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:35.204Z,1520535335.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:35.239Z,1520535335.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:35.607Z,1520535335.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:35.643Z,1520535335.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:36.012Z,1520535336.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:36.039Z,1520535336.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:36.421Z,1520535336.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:36.448Z,1520535336.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:36.813Z,1520535336.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:36.847Z,1520535336.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:37.207Z,1520535337.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:37.223Z,1520535337.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:37.607Z,1520535337.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:37.622Z,1520535337.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:38.021Z,1520535338.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:38.057Z,1520535338.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:38.425Z,1520535338.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:38.456Z,1520535338.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:38.825Z,1520535338.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:38.858Z,1520535338.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:39.210Z,1520535339.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:39.230Z,1520535339.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:39.612Z,1520535339.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:39.628Z,1520535339.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:40.021Z,1520535340.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:40.049Z,1520535340.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:40.425Z,1520535340.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:40.440Z,1520535340.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:40.817Z,1520535340.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:40.833Z,1520535340.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:41.216Z,1520535341.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:41.231Z,1520535341.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:41.615Z,1520535341.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:41.630Z,1520535341.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:42.016Z,1520535342.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:42.031Z,1520535342.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:42.421Z,1520535342.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:42.436Z,1520535342.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:42.821Z,1520535342.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:42.837Z,1520535342.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:43.214Z,1520535343.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:43.230Z,1520535343.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:43.612Z,1520535343.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:43.627Z,1520535343.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:44.017Z,1520535344.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:44.033Z,1520535344.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:44.416Z,1520535344.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:44.431Z,1520535344.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:44.821Z,1520535344.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:44.836Z,1520535344.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:45.215Z,1520535345.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:45.234Z,1520535345.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:45.613Z,1520535345.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:45.629Z,1520535345.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:46.017Z,1520535346.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:46.033Z,1520535346.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:46.417Z,1520535346.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:46.432Z,1520535346.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:46.817Z,1520535346.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:46.832Z,1520535346.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:47.211Z,1520535347.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:47.242Z,1520535347.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:47.615Z,1520535347.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:47.634Z,1520535347.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:48.020Z,1520535348.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:48.035Z,1520535348.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:48.422Z,1520535348.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:48.437Z,1520535348.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:48.821Z,1520535348.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:48.837Z,1520535348.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:49.219Z,1520535349.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:49.234Z,1520535349.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:49.616Z,1520535349.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:49.631Z,1520535349.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:50.020Z,1520535350.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:50.036Z,1520535350.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:50.421Z,1520535350.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:50.436Z,1520535350.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:50.821Z,1520535350.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:50.836Z,1520535350.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:51.209Z,1520535351.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:51.232Z,1520535351.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:51.615Z,1520535351.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:51.630Z,1520535351.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:52.021Z,1520535352.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:52.037Z,1520535352.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:52.421Z,1520535352.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:52.437Z,1520535352.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:52.821Z,1520535352.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:52.836Z,1520535352.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:53.211Z,1520535353.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:53.232Z,1520535353.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:53.615Z,1520535353.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:53.630Z,1520535353.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:54.021Z,1520535354.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:54.037Z,1520535354.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:54.421Z,1520535354.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:54.436Z,1520535354.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:54.820Z,1520535354.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:54.836Z,1520535354.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:55.217Z,1520535355.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:55.233Z,1520535355.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:55.613Z,1520535355.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:55.629Z,1520535355.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:56.022Z,1520535356.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:56.038Z,1520535356.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:56.422Z,1520535356.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:56.437Z,1520535356.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:56.818Z,1520535356.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:56.843Z,1520535356.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:57.212Z,1520535357.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:57.228Z,1520535357.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:57.607Z,1520535357.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:57.623Z,1520535357.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:58.018Z,1520535358.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:58.034Z,1520535358.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:58.426Z,1520535358.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:58.457Z,1520535358.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:58.817Z,1520535358.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:58.835Z,1520535358.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:59.212Z,1520535359.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:59.227Z,1520535359.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:55:59.614Z,1520535359.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:55:59.629Z,1520535359.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:00.017Z,1520535360.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:00.033Z,1520535360.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:00.421Z,1520535360.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:00.442Z,1520535360.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:00.822Z,1520535360.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:00.842Z,1520535360.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:01.203Z,1520535361.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:01.235Z,1520535361.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:01.616Z,1520535361.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:01.631Z,1520535361.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:02.028Z,1520535362.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:02.051Z,1520535362.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:02.427Z,1520535362.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:02.443Z,1520535362.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:02.829Z,1520535362.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:02.850Z,1520535362.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:03.215Z,1520535363.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:03.231Z,1520535363.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:03.615Z,1520535363.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:03.630Z,1520535363.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:04.026Z,1520535364.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:04.041Z,1520535364.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:04.428Z,1520535364.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:04.443Z,1520535364.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:04.826Z,1520535364.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:04.842Z,1520535364.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:05.204Z,1520535365.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:05.238Z,1520535365.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:05.617Z,1520535365.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:05.633Z,1520535365.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:06.017Z,1520535366.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:06.033Z,1520535366.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:06.426Z,1520535366.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:06.440Z,1520535366.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:06.828Z,1520535366.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:06.843Z,1520535366.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:07.216Z,1520535367.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:07.233Z,1520535367.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:07.603Z,1520535367.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:07.632Z,1520535367.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:08.028Z,1520535368.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:08.044Z,1520535368.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:08.429Z,1520535368.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:08.444Z,1520535368.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:08.829Z,1520535368.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:08.850Z,1520535368.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:09.215Z,1520535369.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:09.238Z,1520535369.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:09.599Z,1520535369.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:09.626Z,1520535369.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:10.030Z,1520535370.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:10.045Z,1520535370.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:10.429Z,1520535370.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:10.445Z,1520535370.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:10.825Z,1520535370.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:10.841Z,1520535370.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:11.204Z,1520535371.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:11.231Z,1520535371.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:11.607Z,1520535371.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:11.635Z,1520535371.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:15.746Z,1520535375.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:15.776Z,1520535375.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:15.779Z,1520535375.779 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T18:51:13.9Z
2018-03-08T18:56:15.779Z,1520535375.779 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T18:56:15.780Z,1520535375.780 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T18:56:15.885Z,1520535375.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:15.901Z,1520535375.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:16.312Z,1520535376.312 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0260.lzma
2018-03-08T18:56:16.346Z,1520535376.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:16.361Z,1520535376.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:16.631Z,1520535376.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:16.666Z,1520535376.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:17.003Z,1520535377.003 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0260.lzma.bak
2018-03-08T18:56:17.004Z,1520535377.004 [DataOverHttps](INFO): SBD MOMSN=7988247
2018-03-08T18:56:17.047Z,1520535377.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:17.086Z,1520535377.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:17.624Z,1520535377.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:17.640Z,1520535377.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:17.834Z,1520535377.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:17.849Z,1520535377.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:20.956Z,1520535380.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:20.985Z,1520535380.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:21.087Z,1520535381.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:21.103Z,1520535381.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:21.487Z,1520535381.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:21.504Z,1520535381.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:21.864Z,1520535381.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:21.889Z,1520535381.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:22.260Z,1520535382.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:22.276Z,1520535382.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:22.656Z,1520535382.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:22.671Z,1520535382.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:23.089Z,1520535383.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:23.104Z,1520535383.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:26.177Z,1520535386.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:26.201Z,1520535386.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:26.325Z,1520535386.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:26.358Z,1520535386.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:26.632Z,1520535386.632 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0261.lzma
2018-03-08T18:56:26.666Z,1520535386.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:26.694Z,1520535386.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:27.056Z,1520535387.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:27.071Z,1520535387.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:27.428Z,1520535387.428 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0261.lzma.bak
2018-03-08T18:56:27.428Z,1520535387.428 [DataOverHttps](INFO): SBD MOMSN=7988249
2018-03-08T18:56:27.465Z,1520535387.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:27.480Z,1520535387.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:28.054Z,1520535388.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:28.069Z,1520535388.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:28.072Z,1520535388.072 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T18:56:28.072Z,1520535388.072 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T18:56:28.072Z,1520535388.072 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T18:56:28.273Z,1520535388.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:28.302Z,1520535388.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:31.381Z,1520535391.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:31.405Z,1520535391.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:31.513Z,1520535391.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:31.529Z,1520535391.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:31.864Z,1520535391.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:31.880Z,1520535391.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:32.261Z,1520535392.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:32.276Z,1520535392.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:32.660Z,1520535392.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:32.684Z,1520535392.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:33.073Z,1520535393.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:33.105Z,1520535393.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:33.465Z,1520535393.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:33.505Z,1520535393.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:33.860Z,1520535393.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:33.875Z,1520535393.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:34.262Z,1520535394.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:34.277Z,1520535394.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:34.661Z,1520535394.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:34.676Z,1520535394.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:35.052Z,1520535395.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:35.083Z,1520535395.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:35.461Z,1520535395.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:35.476Z,1520535395.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:35.915Z,1520535395.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:35.958Z,1520535395.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:36.265Z,1520535396.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:36.281Z,1520535396.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:36.673Z,1520535396.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:36.688Z,1520535396.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:37.065Z,1520535397.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:37.086Z,1520535397.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:37.457Z,1520535397.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:37.485Z,1520535397.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:37.892Z,1520535397.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:38.054Z,1520535398.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:38.265Z,1520535398.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:38.280Z,1520535398.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:38.653Z,1520535398.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:38.676Z,1520535398.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:39.069Z,1520535399.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:39.085Z,1520535399.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:39.469Z,1520535399.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:39.490Z,1520535399.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:39.885Z,1520535399.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:39.908Z,1520535399.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:40.259Z,1520535400.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:40.274Z,1520535400.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:40.660Z,1520535400.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:40.693Z,1520535400.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:41.052Z,1520535401.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:41.075Z,1520535401.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:41.453Z,1520535401.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:41.489Z,1520535401.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:41.852Z,1520535401.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:41.867Z,1520535401.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:42.280Z,1520535402.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:42.295Z,1520535402.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:42.669Z,1520535402.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:42.692Z,1520535402.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:43.080Z,1520535403.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:43.096Z,1520535403.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:43.459Z,1520535403.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:43.490Z,1520535403.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:43.854Z,1520535403.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:43.874Z,1520535403.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:44.259Z,1520535404.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:44.275Z,1520535404.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:44.654Z,1520535404.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:44.673Z,1520535404.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:45.065Z,1520535405.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:45.093Z,1520535405.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:45.474Z,1520535405.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:45.505Z,1520535405.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:45.869Z,1520535405.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:45.884Z,1520535405.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:46.259Z,1520535406.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:46.275Z,1520535406.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:46.658Z,1520535406.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:46.678Z,1520535406.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:47.053Z,1520535407.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:47.081Z,1520535407.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:47.463Z,1520535407.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:47.478Z,1520535407.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:47.864Z,1520535407.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:47.879Z,1520535407.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:48.265Z,1520535408.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:48.281Z,1520535408.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:48.681Z,1520535408.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:48.710Z,1520535408.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:49.077Z,1520535409.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:49.113Z,1520535409.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:49.463Z,1520535409.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:49.478Z,1520535409.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:49.858Z,1520535409.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:49.873Z,1520535409.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:50.261Z,1520535410.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:50.289Z,1520535410.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:50.672Z,1520535410.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:50.687Z,1520535410.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:51.073Z,1520535411.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:51.088Z,1520535411.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:51.473Z,1520535411.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:51.488Z,1520535411.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:51.857Z,1520535411.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:51.876Z,1520535411.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:52.263Z,1520535412.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:52.279Z,1520535412.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:52.666Z,1520535412.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:52.681Z,1520535412.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:53.060Z,1520535413.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:53.088Z,1520535413.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:53.473Z,1520535413.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:53.495Z,1520535413.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:53.873Z,1520535413.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:53.889Z,1520535413.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:54.273Z,1520535414.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:54.288Z,1520535414.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:54.664Z,1520535414.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:54.686Z,1520535414.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:55.064Z,1520535415.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:55.084Z,1520535415.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:55.464Z,1520535415.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:55.486Z,1520535415.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:55.866Z,1520535415.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:55.886Z,1520535415.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:56.265Z,1520535416.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:56.280Z,1520535416.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:56.663Z,1520535416.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:56.686Z,1520535416.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:57.077Z,1520535417.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:57.093Z,1520535417.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:57.475Z,1520535417.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:57.491Z,1520535417.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:57.851Z,1520535417.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:57.886Z,1520535417.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:58.267Z,1520535418.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:58.283Z,1520535418.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:58.651Z,1520535418.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:58.686Z,1520535418.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:59.051Z,1520535419.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:59.083Z,1520535419.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:59.470Z,1520535419.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:59.486Z,1520535419.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:56:59.875Z,1520535419.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:56:59.890Z,1520535419.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:00.269Z,1520535420.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:00.285Z,1520535420.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:00.667Z,1520535420.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:00.682Z,1520535420.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:01.051Z,1520535421.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:01.086Z,1520535421.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:01.449Z,1520535421.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:01.475Z,1520535421.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:01.856Z,1520535421.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:01.890Z,1520535421.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:02.254Z,1520535422.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:02.282Z,1520535422.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:02.673Z,1520535422.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:02.689Z,1520535422.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:03.039Z,1520535423.039 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-03-08T18:57:03.039Z,1520535423.039 [DropWeight] Hardware Fault, FailCount= 1
2018-03-08T18:57:03.039Z,1520535423.039 [DropWeight](ERROR): Hardware Fault
2018-03-08T18:57:03.086Z,1520535423.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:03.115Z,1520535423.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:03.139Z,1520535423.139 [CBIT](INFO): Critical error at 20180308T185703
2018-03-08T18:57:03.146Z,1520535423.146 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-03-08T18:57:03.146Z,1520535423.146 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-03-08T18:57:03.477Z,1520535423.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:03.492Z,1520535423.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:03.503Z,1520535423.503 [CBIT](INFO): Critical error at 20180308T185703
2018-03-08T18:57:03.850Z,1520535423.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:03.876Z,1520535423.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:04.249Z,1520535424.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:04.275Z,1520535424.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:04.649Z,1520535424.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:04.684Z,1520535424.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:05.054Z,1520535425.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:05.080Z,1520535425.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:05.476Z,1520535425.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:05.492Z,1520535425.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:05.873Z,1520535425.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:05.888Z,1520535425.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:06.277Z,1520535426.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:06.299Z,1520535426.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:06.666Z,1520535426.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:06.686Z,1520535426.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:07.050Z,1520535427.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:07.079Z,1520535427.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:07.455Z,1520535427.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:07.482Z,1520535427.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:07.855Z,1520535427.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:07.881Z,1520535427.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:08.250Z,1520535428.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:08.279Z,1520535428.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:08.674Z,1520535428.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:08.690Z,1520535428.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:09.074Z,1520535429.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:09.089Z,1520535429.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:09.470Z,1520535429.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:09.490Z,1520535429.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:09.855Z,1520535429.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:09.881Z,1520535429.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:10.266Z,1520535430.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:10.286Z,1520535430.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:10.651Z,1520535430.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:10.679Z,1520535430.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:11.049Z,1520535431.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:11.076Z,1520535431.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:11.474Z,1520535431.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:11.489Z,1520535431.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:11.877Z,1520535431.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:11.893Z,1520535431.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:12.273Z,1520535432.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:12.289Z,1520535432.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:12.653Z,1520535432.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:12.683Z,1520535432.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:13.049Z,1520535433.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:13.076Z,1520535433.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:13.454Z,1520535433.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:13.480Z,1520535433.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:13.851Z,1520535433.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:13.878Z,1520535433.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:14.248Z,1520535434.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:14.284Z,1520535434.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:14.673Z,1520535434.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:14.688Z,1520535434.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:15.079Z,1520535435.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:15.099Z,1520535435.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:15.473Z,1520535435.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:15.488Z,1520535435.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:15.865Z,1520535435.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:15.880Z,1520535435.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:16.252Z,1520535436.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:16.284Z,1520535436.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:16.655Z,1520535436.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:16.682Z,1520535436.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:17.054Z,1520535437.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:17.081Z,1520535437.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:17.465Z,1520535437.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:17.488Z,1520535437.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:17.873Z,1520535437.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:17.888Z,1520535437.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:18.272Z,1520535438.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:18.287Z,1520535438.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:18.658Z,1520535438.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:18.684Z,1520535438.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:19.054Z,1520535439.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:19.090Z,1520535439.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:19.458Z,1520535439.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:19.489Z,1520535439.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:19.857Z,1520535439.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:19.872Z,1520535439.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:20.254Z,1520535440.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:20.269Z,1520535440.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:20.673Z,1520535440.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:20.699Z,1520535440.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:21.070Z,1520535441.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:21.094Z,1520535441.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:21.473Z,1520535441.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:21.498Z,1520535441.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:21.852Z,1520535441.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:21.867Z,1520535441.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:22.264Z,1520535442.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:22.299Z,1520535442.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:22.658Z,1520535442.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:22.673Z,1520535442.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:23.058Z,1520535443.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:23.078Z,1520535443.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:23.469Z,1520535443.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:23.502Z,1520535443.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:23.873Z,1520535443.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:23.899Z,1520535443.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:24.269Z,1520535444.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:24.299Z,1520535444.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:24.656Z,1520535444.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:24.671Z,1520535444.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:25.058Z,1520535445.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:25.073Z,1520535445.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:25.460Z,1520535445.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:25.476Z,1520535445.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:25.859Z,1520535445.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:25.875Z,1520535445.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:26.259Z,1520535446.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:26.274Z,1520535446.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:26.673Z,1520535446.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:26.703Z,1520535446.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:27.069Z,1520535447.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:27.084Z,1520535447.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:27.472Z,1520535447.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:27.487Z,1520535447.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:27.859Z,1520535447.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:27.879Z,1520535447.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:28.256Z,1520535448.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:28.276Z,1520535448.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:28.664Z,1520535448.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:28.679Z,1520535448.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:31.768Z,1520535451.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:31.783Z,1520535451.783 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:31.783Z,1520535451.783 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 224
2018-03-08T18:57:31.783Z,1520535451.783 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T18:57:31.785Z,1520535451.785 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:31.785Z,1520535451.785 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 224
2018-03-08T18:57:31.785Z,1520535451.785 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T18:57:31.787Z,1520535451.787 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:31.787Z,1520535451.787 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 224
2018-03-08T18:57:31.787Z,1520535451.787 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T18:57:31.819Z,1520535451.819 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T18:57:31.819Z,1520535451.819 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T18:57:31.820Z,1520535451.820 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T18:57:31.894Z,1520535451.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:31.946Z,1520535451.946 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T18:57:31.946Z,1520535451.946 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 224
2018-03-08T18:57:31.947Z,1520535451.947 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T18:57:31.947Z,1520535451.947 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 224
2018-03-08T18:57:31.947Z,1520535451.947 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T18:57:31.947Z,1520535451.947 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 224
2018-03-08T18:57:32.283Z,1520535452.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:32.298Z,1520535452.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T18:57:32.298Z,1520535452.298 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:57:32.298Z,1520535452.298 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:57:32.299Z,1520535452.299 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T18:57:32.299Z,1520535452.299 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:57:32.299Z,1520535452.299 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:57:32.300Z,1520535452.300 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T18:57:32.300Z,1520535452.300 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T18:57:32.301Z,1520535452.301 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T18:57:32.683Z,1520535452.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:32.698Z,1520535452.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-03-08T18:57:32.699Z,1520535452.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:33.073Z,1520535453.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:33.088Z,1520535453.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-03-08T18:57:33.089Z,1520535453.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:33.460Z,1520535453.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:33.495Z,1520535453.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-03-08T18:57:33.496Z,1520535453.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:33.876Z,1520535453.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:33.891Z,1520535453.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-03-08T18:57:33.892Z,1520535453.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:34.262Z,1520535454.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:34.294Z,1520535454.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-03-08T18:57:34.295Z,1520535454.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:34.682Z,1520535454.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:34.697Z,1520535454.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-03-08T18:57:34.698Z,1520535454.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:35.084Z,1520535455.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:35.107Z,1520535455.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-03-08T18:57:35.108Z,1520535455.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:35.485Z,1520535455.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:35.500Z,1520535455.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-08T18:57:35.501Z,1520535455.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:35.867Z,1520535455.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:35.894Z,1520535455.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-03-08T18:57:35.895Z,1520535455.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:36.267Z,1520535456.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:36.294Z,1520535456.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-03-08T18:57:36.295Z,1520535456.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:36.665Z,1520535456.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:36.698Z,1520535456.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-08T18:57:36.699Z,1520535456.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:37.067Z,1520535457.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:37.102Z,1520535457.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-08T18:57:37.103Z,1520535457.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:37.487Z,1520535457.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:37.503Z,1520535457.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T18:57:37.504Z,1520535457.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:37.886Z,1520535457.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:37.901Z,1520535457.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T18:57:37.902Z,1520535457.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:38.282Z,1520535458.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:38.298Z,1520535458.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-08T18:57:38.299Z,1520535458.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:38.660Z,1520535458.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:38.683Z,1520535458.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-08T18:57:38.684Z,1520535458.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:39.062Z,1520535459.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:39.100Z,1520535459.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-08T18:57:39.101Z,1520535459.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:39.462Z,1520535459.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:39.503Z,1520535459.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-08T18:57:39.504Z,1520535459.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:39.867Z,1520535459.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:39.899Z,1520535459.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-08T18:57:39.900Z,1520535459.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:40.270Z,1520535460.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:40.296Z,1520535460.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-08T18:57:40.297Z,1520535460.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:40.673Z,1520535460.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:40.699Z,1520535460.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-08T18:57:40.700Z,1520535460.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:41.073Z,1520535461.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:41.108Z,1520535461.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-08T18:57:41.110Z,1520535461.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:41.485Z,1520535461.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:41.500Z,1520535461.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-08T18:57:41.501Z,1520535461.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:41.870Z,1520535461.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:41.902Z,1520535461.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T18:57:41.903Z,1520535461.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:42.260Z,1520535462.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:42.276Z,1520535462.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-08T18:57:42.289Z,1520535462.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:42.663Z,1520535462.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:42.678Z,1520535462.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T18:57:42.679Z,1520535462.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:43.066Z,1520535463.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:43.080Z,1520535463.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T18:57:43.081Z,1520535463.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:43.477Z,1520535463.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:43.504Z,1520535463.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T18:57:43.505Z,1520535463.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:43.894Z,1520535463.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:43.914Z,1520535463.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T18:57:43.915Z,1520535463.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:44.282Z,1520535464.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:44.314Z,1520535464.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T18:57:44.315Z,1520535464.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:44.663Z,1520535464.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:44.678Z,1520535464.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-08T18:57:44.679Z,1520535464.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:45.070Z,1520535465.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:45.106Z,1520535465.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-08T18:57:45.107Z,1520535465.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:45.470Z,1520535465.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:45.484Z,1520535465.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-08T18:57:45.485Z,1520535465.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:45.869Z,1520535465.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:45.884Z,1520535465.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-08T18:57:45.885Z,1520535465.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:46.271Z,1520535466.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:46.286Z,1520535466.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-08T18:57:46.287Z,1520535466.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:46.685Z,1520535466.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:46.708Z,1520535466.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T18:57:46.709Z,1520535466.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:47.074Z,1520535467.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:47.089Z,1520535467.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-08T18:57:47.090Z,1520535467.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:47.485Z,1520535467.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:47.515Z,1520535467.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T18:57:47.517Z,1520535467.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:47.872Z,1520535467.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:47.886Z,1520535467.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T18:57:47.887Z,1520535467.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:48.267Z,1520535468.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:48.283Z,1520535468.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T18:57:48.284Z,1520535468.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:48.672Z,1520535468.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:48.688Z,1520535468.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T18:57:48.689Z,1520535468.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:49.067Z,1520535469.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:49.083Z,1520535469.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-08T18:57:49.084Z,1520535469.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:49.476Z,1520535469.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:49.491Z,1520535469.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T18:57:49.493Z,1520535469.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:49.881Z,1520535469.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:49.896Z,1520535469.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-08T18:57:49.897Z,1520535469.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:50.279Z,1520535470.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:50.298Z,1520535470.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-08T18:57:50.299Z,1520535470.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:50.668Z,1520535470.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:50.683Z,1520535470.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T18:57:50.684Z,1520535470.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:51.067Z,1520535471.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:51.090Z,1520535471.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T18:57:51.091Z,1520535471.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:51.474Z,1520535471.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:51.494Z,1520535471.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T18:57:51.495Z,1520535471.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:51.877Z,1520535471.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:51.892Z,1520535471.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:52.262Z,1520535472.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:52.294Z,1520535472.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:52.685Z,1520535472.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:52.700Z,1520535472.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:53.081Z,1520535473.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:53.096Z,1520535473.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:53.477Z,1520535473.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:53.505Z,1520535473.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:53.866Z,1520535473.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:53.898Z,1520535473.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:54.266Z,1520535474.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:54.293Z,1520535474.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:54.667Z,1520535474.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:54.693Z,1520535474.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:55.062Z,1520535475.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:55.088Z,1520535475.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:55.481Z,1520535475.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:55.497Z,1520535475.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:55.881Z,1520535475.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:55.910Z,1520535475.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:56.285Z,1520535476.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:56.306Z,1520535476.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:56.661Z,1520535476.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:56.684Z,1520535476.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:57.062Z,1520535477.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:57.094Z,1520535477.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:57.466Z,1520535477.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:57.505Z,1520535477.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:57.865Z,1520535477.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:57.880Z,1520535477.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:58.266Z,1520535478.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:58.283Z,1520535478.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:58.681Z,1520535478.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:58.706Z,1520535478.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:59.081Z,1520535479.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:59.103Z,1520535479.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:59.481Z,1520535479.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:59.505Z,1520535479.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:57:59.870Z,1520535479.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:57:59.885Z,1520535479.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:00.266Z,1520535480.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:00.282Z,1520535480.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:00.669Z,1520535480.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:00.685Z,1520535480.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:01.067Z,1520535481.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:01.082Z,1520535481.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:01.477Z,1520535481.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:01.493Z,1520535481.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:01.885Z,1520535481.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:01.915Z,1520535481.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:02.273Z,1520535482.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:02.294Z,1520535482.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:02.664Z,1520535482.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:02.688Z,1520535482.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:03.074Z,1520535483.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:03.094Z,1520535483.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:03.474Z,1520535483.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:03.489Z,1520535483.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:03.874Z,1520535483.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:03.890Z,1520535483.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:04.278Z,1520535484.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:04.299Z,1520535484.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:04.679Z,1520535484.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:04.694Z,1520535484.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:05.077Z,1520535485.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:05.092Z,1520535485.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:05.480Z,1520535485.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:05.502Z,1520535485.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:05.872Z,1520535485.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:05.887Z,1520535485.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:06.272Z,1520535486.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:06.288Z,1520535486.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:06.669Z,1520535486.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:06.685Z,1520535486.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:07.067Z,1520535487.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:07.092Z,1520535487.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:07.480Z,1520535487.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:07.496Z,1520535487.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:07.879Z,1520535487.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:07.902Z,1520535487.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:08.281Z,1520535488.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:08.296Z,1520535488.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:08.672Z,1520535488.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:08.687Z,1520535488.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:09.078Z,1520535489.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:09.098Z,1520535489.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:09.479Z,1520535489.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:09.510Z,1520535489.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:09.863Z,1520535489.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:09.890Z,1520535489.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:10.264Z,1520535490.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:10.291Z,1520535490.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:10.688Z,1520535490.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:10.703Z,1520535490.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:11.079Z,1520535491.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:11.094Z,1520535491.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:11.485Z,1520535491.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:11.507Z,1520535491.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:11.874Z,1520535491.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:11.889Z,1520535491.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:12.276Z,1520535492.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:12.291Z,1520535492.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:12.663Z,1520535492.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:12.695Z,1520535492.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:13.067Z,1520535493.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:13.094Z,1520535493.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:13.486Z,1520535493.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:13.502Z,1520535493.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:13.892Z,1520535493.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:13.911Z,1520535493.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:14.285Z,1520535494.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:14.300Z,1520535494.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:14.661Z,1520535494.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:14.688Z,1520535494.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:15.067Z,1520535495.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:15.098Z,1520535495.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:15.471Z,1520535495.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:15.498Z,1520535495.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:15.868Z,1520535495.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:15.897Z,1520535495.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:16.262Z,1520535496.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:16.294Z,1520535496.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:16.684Z,1520535496.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:16.708Z,1520535496.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:17.078Z,1520535497.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:17.106Z,1520535497.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:17.482Z,1520535497.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:17.506Z,1520535497.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:17.871Z,1520535497.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:17.887Z,1520535497.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:18.270Z,1520535498.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:18.286Z,1520535498.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:18.671Z,1520535498.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:18.687Z,1520535498.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:19.071Z,1520535499.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:19.086Z,1520535499.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:19.481Z,1520535499.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:19.512Z,1520535499.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:19.886Z,1520535499.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:19.921Z,1520535499.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:20.285Z,1520535500.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:20.322Z,1520535500.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:20.665Z,1520535500.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:20.680Z,1520535500.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:21.069Z,1520535501.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:21.085Z,1520535501.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:21.471Z,1520535501.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:21.486Z,1520535501.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:21.873Z,1520535501.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:21.889Z,1520535501.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:22.271Z,1520535502.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:22.294Z,1520535502.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:22.677Z,1520535502.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:22.692Z,1520535502.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:23.073Z,1520535503.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:23.089Z,1520535503.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:23.485Z,1520535503.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:23.500Z,1520535503.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:23.873Z,1520535503.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:23.888Z,1520535503.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:24.271Z,1520535504.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:24.287Z,1520535504.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:24.675Z,1520535504.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:24.691Z,1520535504.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:25.073Z,1520535505.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:25.089Z,1520535505.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:25.477Z,1520535505.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:25.493Z,1520535505.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:25.877Z,1520535505.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:25.893Z,1520535505.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:26.277Z,1520535506.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:26.299Z,1520535506.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:26.666Z,1520535506.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:26.682Z,1520535506.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:27.070Z,1520535507.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:27.090Z,1520535507.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:27.474Z,1520535507.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:27.489Z,1520535507.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:27.873Z,1520535507.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:27.888Z,1520535507.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:28.270Z,1520535508.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:28.285Z,1520535508.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:28.696Z,1520535508.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:28.729Z,1520535508.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:32.122Z,1520535512.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:32.139Z,1520535512.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:32.249Z,1520535512.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:32.274Z,1520535512.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:32.598Z,1520535512.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:32.630Z,1520535512.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:32.991Z,1520535512.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:33.006Z,1520535513.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:33.387Z,1520535513.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:33.403Z,1520535513.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:33.791Z,1520535513.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:33.807Z,1520535513.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:34.194Z,1520535514.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:34.210Z,1520535514.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:34.609Z,1520535514.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:34.645Z,1520535514.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:35.010Z,1520535515.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:35.044Z,1520535515.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:35.405Z,1520535515.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:35.440Z,1520535515.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:35.793Z,1520535515.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:35.808Z,1520535515.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:36.193Z,1520535516.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:36.209Z,1520535516.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:36.597Z,1520535516.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:36.612Z,1520535516.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:36.996Z,1520535516.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:37.016Z,1520535517.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:37.409Z,1520535517.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:37.441Z,1520535517.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:37.804Z,1520535517.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:37.819Z,1520535517.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:38.201Z,1520535518.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:38.217Z,1520535518.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:38.599Z,1520535518.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:38.619Z,1520535518.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:38.998Z,1520535518.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:39.013Z,1520535519.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:39.401Z,1520535519.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:39.417Z,1520535519.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:39.802Z,1520535519.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:39.818Z,1520535519.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:40.201Z,1520535520.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:40.221Z,1520535520.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:40.597Z,1520535520.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:40.613Z,1520535520.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:40.994Z,1520535520.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:41.015Z,1520535521.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:41.401Z,1520535521.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:41.416Z,1520535521.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:41.805Z,1520535521.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:41.826Z,1520535521.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:42.204Z,1520535522.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:42.226Z,1520535522.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:42.602Z,1520535522.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:42.617Z,1520535522.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:42.998Z,1520535522.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:43.052Z,1520535523.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:43.404Z,1520535523.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:43.425Z,1520535523.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:43.805Z,1520535523.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:43.820Z,1520535523.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:44.205Z,1520535524.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:44.220Z,1520535524.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:44.599Z,1520535524.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:44.616Z,1520535524.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:44.997Z,1520535524.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:45.017Z,1520535525.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:45.405Z,1520535525.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:45.426Z,1520535525.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:45.809Z,1520535525.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:45.824Z,1520535525.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:46.210Z,1520535526.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:46.234Z,1520535526.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:46.600Z,1520535526.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:46.621Z,1520535526.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:46.999Z,1520535526.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:47.014Z,1520535527.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:47.406Z,1520535527.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:47.422Z,1520535527.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:47.805Z,1520535527.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:47.830Z,1520535527.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:48.210Z,1520535528.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:48.229Z,1520535528.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:48.599Z,1520535528.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:48.627Z,1520535528.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:48.980Z,1520535528.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:49.015Z,1520535529.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:49.405Z,1520535529.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:49.428Z,1520535529.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:49.805Z,1520535529.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:49.826Z,1520535529.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:50.202Z,1520535530.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:50.223Z,1520535530.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:50.587Z,1520535530.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:50.619Z,1520535530.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:50.990Z,1520535530.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:51.019Z,1520535531.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:51.411Z,1520535531.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:51.430Z,1520535531.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:51.809Z,1520535531.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:51.857Z,1520535531.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:52.214Z,1520535532.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:52.239Z,1520535532.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:52.588Z,1520535532.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:52.614Z,1520535532.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:52.987Z,1520535532.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:53.025Z,1520535533.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:53.410Z,1520535533.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:53.425Z,1520535533.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:53.801Z,1520535533.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:53.824Z,1520535533.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:54.211Z,1520535534.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:54.231Z,1520535534.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:54.587Z,1520535534.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:54.626Z,1520535534.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:54.984Z,1520535534.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:55.008Z,1520535535.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:55.398Z,1520535535.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:55.425Z,1520535535.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:55.797Z,1520535535.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:55.837Z,1520535535.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:56.197Z,1520535536.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:56.232Z,1520535536.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:56.591Z,1520535536.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:56.619Z,1520535536.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:56.987Z,1520535536.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:57.026Z,1520535537.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:57.401Z,1520535537.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:57.431Z,1520535537.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:57.805Z,1520535537.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:57.838Z,1520535537.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:58.205Z,1520535538.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:58.249Z,1520535538.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:58.588Z,1520535538.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:58.603Z,1520535538.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:58.993Z,1520535538.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:59.008Z,1520535539.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:59.396Z,1520535539.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:59.416Z,1520535539.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:58:59.797Z,1520535539.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:58:59.813Z,1520535539.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:00.209Z,1520535540.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:00.247Z,1520535540.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:00.599Z,1520535540.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:00.614Z,1520535540.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:00.988Z,1520535540.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:01.004Z,1520535541.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:01.400Z,1520535541.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:01.415Z,1520535541.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:01.805Z,1520535541.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:01.820Z,1520535541.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:02.200Z,1520535542.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:02.215Z,1520535542.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:02.598Z,1520535542.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:02.619Z,1520535542.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:02.999Z,1520535542.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:03.014Z,1520535543.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:03.400Z,1520535543.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:03.423Z,1520535543.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:03.805Z,1520535543.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:03.830Z,1520535543.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:04.210Z,1520535544.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:04.229Z,1520535544.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:04.594Z,1520535544.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:04.626Z,1520535544.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:04.998Z,1520535544.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:05.015Z,1520535545.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:05.401Z,1520535545.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:05.428Z,1520535545.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:05.801Z,1520535545.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:05.823Z,1520535545.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:06.209Z,1520535546.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:06.225Z,1520535546.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:06.596Z,1520535546.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:06.611Z,1520535546.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:06.984Z,1520535546.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:07.016Z,1520535547.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:07.410Z,1520535547.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:07.429Z,1520535547.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:07.812Z,1520535547.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:07.857Z,1520535547.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:08.196Z,1520535548.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:08.229Z,1520535548.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:08.588Z,1520535548.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:08.615Z,1520535548.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:08.999Z,1520535548.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:09.019Z,1520535549.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:09.409Z,1520535549.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:09.430Z,1520535549.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:09.811Z,1520535549.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:09.826Z,1520535549.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:10.209Z,1520535550.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:10.232Z,1520535550.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:10.585Z,1520535550.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:10.617Z,1520535550.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:10.985Z,1520535550.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:11.018Z,1520535551.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:11.410Z,1520535551.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:11.425Z,1520535551.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:11.799Z,1520535551.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:11.834Z,1520535551.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:12.212Z,1520535552.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:12.230Z,1520535552.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:12.591Z,1520535552.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:12.632Z,1520535552.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:12.980Z,1520535552.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:13.003Z,1520535553.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:13.409Z,1520535553.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:13.430Z,1520535553.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:13.811Z,1520535553.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:13.829Z,1520535553.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:14.205Z,1520535554.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:14.240Z,1520535554.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:14.591Z,1520535554.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:14.617Z,1520535554.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:14.982Z,1520535554.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:15.022Z,1520535555.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:15.412Z,1520535555.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:15.430Z,1520535555.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:15.813Z,1520535555.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:15.858Z,1520535555.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:16.206Z,1520535556.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:16.226Z,1520535556.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:16.591Z,1520535556.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:16.618Z,1520535556.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:16.987Z,1520535556.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:17.024Z,1520535557.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:17.411Z,1520535557.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:17.427Z,1520535557.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:17.797Z,1520535557.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:17.835Z,1520535557.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:18.198Z,1520535558.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:18.230Z,1520535558.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:18.587Z,1520535558.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:18.622Z,1520535558.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:18.984Z,1520535558.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:18.999Z,1520535558.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:19.405Z,1520535559.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:19.438Z,1520535559.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:19.801Z,1520535559.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:19.834Z,1520535559.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:20.198Z,1520535560.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:20.230Z,1520535560.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:20.591Z,1520535560.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:20.607Z,1520535560.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:20.991Z,1520535560.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:21.006Z,1520535561.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:21.397Z,1520535561.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:21.413Z,1520535561.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:21.805Z,1520535561.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:21.837Z,1520535561.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:22.197Z,1520535562.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:22.218Z,1520535562.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:22.593Z,1520535562.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:22.608Z,1520535562.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:22.997Z,1520535562.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:23.012Z,1520535563.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:23.410Z,1520535563.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:23.437Z,1520535563.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:23.797Z,1520535563.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:23.838Z,1520535563.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:24.201Z,1520535564.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:24.217Z,1520535564.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:24.597Z,1520535564.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:24.612Z,1520535564.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:24.992Z,1520535564.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:25.018Z,1520535565.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:25.409Z,1520535565.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:25.441Z,1520535565.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:25.805Z,1520535565.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:25.820Z,1520535565.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:26.201Z,1520535566.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:26.230Z,1520535566.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:26.600Z,1520535566.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:26.621Z,1520535566.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:26.982Z,1520535566.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:27.017Z,1520535567.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:27.410Z,1520535567.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:27.425Z,1520535567.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:27.813Z,1520535567.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:27.833Z,1520535567.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:28.210Z,1520535568.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:28.229Z,1520535568.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:28.599Z,1520535568.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:28.634Z,1520535568.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:28.998Z,1520535568.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:29.019Z,1520535569.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:29.400Z,1520535569.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:29.432Z,1520535569.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:32.514Z,1520535572.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:32.533Z,1520535572.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:32.651Z,1520535572.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:32.674Z,1520535572.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:33.019Z,1520535573.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:33.038Z,1520535573.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:33.424Z,1520535573.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:33.467Z,1520535573.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:33.829Z,1520535573.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:33.865Z,1520535573.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:34.226Z,1520535574.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:34.242Z,1520535574.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:34.637Z,1520535574.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:34.670Z,1520535574.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:35.037Z,1520535575.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:35.071Z,1520535575.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:35.431Z,1520535575.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:35.472Z,1520535575.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:35.812Z,1520535575.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:35.863Z,1520535575.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:36.225Z,1520535576.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:36.252Z,1520535576.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:36.622Z,1520535576.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:36.651Z,1520535576.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:37.012Z,1520535577.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:37.040Z,1520535577.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:37.429Z,1520535577.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:37.444Z,1520535577.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:37.837Z,1520535577.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:37.876Z,1520535577.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:38.226Z,1520535578.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:38.265Z,1520535578.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:38.621Z,1520535578.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:38.642Z,1520535578.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:39.026Z,1520535579.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:39.043Z,1520535579.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:39.438Z,1520535579.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:39.473Z,1520535579.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:39.829Z,1520535579.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:39.869Z,1520535579.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:40.225Z,1520535580.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:40.246Z,1520535580.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:40.627Z,1520535580.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:40.644Z,1520535580.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:41.025Z,1520535581.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:41.041Z,1520535581.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:41.437Z,1520535581.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:41.473Z,1520535581.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:41.823Z,1520535581.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:41.865Z,1520535581.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:42.239Z,1520535582.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:42.270Z,1520535582.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:42.627Z,1520535582.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:42.642Z,1520535582.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:43.019Z,1520535583.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:43.052Z,1520535583.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:43.420Z,1520535583.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:43.449Z,1520535583.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:43.830Z,1520535583.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:43.845Z,1520535583.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:44.231Z,1520535584.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:44.246Z,1520535584.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:44.641Z,1520535584.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:44.659Z,1520535584.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:45.043Z,1520535585.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:45.058Z,1520535585.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:45.433Z,1520535585.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:45.454Z,1520535585.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:45.828Z,1520535585.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:45.844Z,1520535585.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:46.227Z,1520535586.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:46.253Z,1520535586.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:46.627Z,1520535586.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:46.647Z,1520535586.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:47.014Z,1520535587.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:47.053Z,1520535587.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:47.438Z,1520535587.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:47.459Z,1520535587.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:47.824Z,1520535587.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:47.858Z,1520535587.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:48.239Z,1520535588.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:48.255Z,1520535588.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:48.632Z,1520535588.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:48.647Z,1520535588.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:49.014Z,1520535589.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:49.047Z,1520535589.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:49.418Z,1520535589.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:49.466Z,1520535589.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:49.819Z,1520535589.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:49.852Z,1520535589.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:50.211Z,1520535590.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:50.242Z,1520535590.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:50.632Z,1520535590.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:50.666Z,1520535590.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:51.044Z,1520535591.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:51.066Z,1520535591.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:51.439Z,1520535591.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:51.458Z,1520535591.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:51.819Z,1520535591.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:51.859Z,1520535591.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:52.221Z,1520535592.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:52.255Z,1520535592.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:52.619Z,1520535592.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:52.662Z,1520535592.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:53.017Z,1520535593.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:53.055Z,1520535593.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:53.441Z,1520535593.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:53.457Z,1520535593.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:53.834Z,1520535593.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:53.853Z,1520535593.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:54.233Z,1520535594.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:54.266Z,1520535594.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:54.619Z,1520535594.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:54.670Z,1520535594.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:55.008Z,1520535595.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:55.052Z,1520535595.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:55.417Z,1520535595.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:55.452Z,1520535595.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:55.818Z,1520535595.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:55.856Z,1520535595.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:56.217Z,1520535596.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:56.257Z,1520535596.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:56.632Z,1520535596.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:56.658Z,1520535596.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:57.046Z,1520535597.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:57.062Z,1520535597.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:57.425Z,1520535597.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:57.470Z,1520535597.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:57.819Z,1520535597.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:57.858Z,1520535597.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:58.219Z,1520535598.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:58.256Z,1520535598.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:58.618Z,1520535598.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:58.650Z,1520535598.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:59.018Z,1520535599.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:59.063Z,1520535599.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:59.430Z,1520535599.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:59.467Z,1520535599.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T18:59:59.832Z,1520535599.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T18:59:59.866Z,1520535599.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:00.234Z,1520535600.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:00.260Z,1520535600.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:00.617Z,1520535600.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:00.669Z,1520535600.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:01.017Z,1520535601.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:01.061Z,1520535601.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:01.425Z,1520535601.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:01.458Z,1520535601.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:01.826Z,1520535601.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:01.842Z,1520535601.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:02.223Z,1520535602.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:02.266Z,1520535602.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:02.640Z,1520535602.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:02.666Z,1520535602.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:03.035Z,1520535603.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:03.063Z,1520535603.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:03.437Z,1520535603.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:03.469Z,1520535603.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:03.827Z,1520535603.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:03.867Z,1520535603.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:04.227Z,1520535604.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:04.248Z,1520535604.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:04.628Z,1520535604.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:04.650Z,1520535604.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:05.026Z,1520535605.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:05.051Z,1520535605.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:05.429Z,1520535605.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:05.469Z,1520535605.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:05.830Z,1520535605.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:05.850Z,1520535605.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:06.232Z,1520535606.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:06.247Z,1520535606.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:06.629Z,1520535606.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:06.659Z,1520535606.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:07.026Z,1520535607.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:07.058Z,1520535607.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:07.425Z,1520535607.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:07.446Z,1520535607.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:07.812Z,1520535607.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:07.853Z,1520535607.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:08.231Z,1520535608.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:08.246Z,1520535608.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:08.635Z,1520535608.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:08.677Z,1520535608.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:09.040Z,1520535609.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:09.082Z,1520535609.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:09.442Z,1520535609.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:09.462Z,1520535609.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:09.830Z,1520535609.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:09.850Z,1520535609.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:10.232Z,1520535610.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:10.266Z,1520535610.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:10.613Z,1520535610.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:10.658Z,1520535610.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:11.016Z,1520535611.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:11.066Z,1520535611.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:11.438Z,1520535611.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:11.459Z,1520535611.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:11.841Z,1520535611.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:11.860Z,1520535611.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:12.240Z,1520535612.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:12.259Z,1520535612.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:12.632Z,1520535612.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:12.647Z,1520535612.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:13.012Z,1520535613.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:13.051Z,1520535613.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:13.425Z,1520535613.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:13.458Z,1520535613.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:13.828Z,1520535613.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:13.848Z,1520535613.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:14.229Z,1520535614.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:14.262Z,1520535614.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:14.638Z,1520535614.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:14.659Z,1520535614.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:15.037Z,1520535615.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:15.057Z,1520535615.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:15.439Z,1520535615.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:15.454Z,1520535615.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:15.831Z,1520535615.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:15.850Z,1520535615.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:16.227Z,1520535616.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:16.243Z,1520535616.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:16.628Z,1520535616.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:16.662Z,1520535616.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:17.015Z,1520535617.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:17.047Z,1520535617.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:17.437Z,1520535617.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:17.457Z,1520535617.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:17.834Z,1520535617.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:17.862Z,1520535617.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:18.239Z,1520535618.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:18.259Z,1520535618.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:18.610Z,1520535618.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:18.651Z,1520535618.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:19.020Z,1520535619.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:19.059Z,1520535619.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:19.420Z,1520535619.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:19.447Z,1520535619.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:19.815Z,1520535619.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:19.849Z,1520535619.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:20.217Z,1520535620.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:20.248Z,1520535620.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:20.633Z,1520535620.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:20.655Z,1520535620.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:21.040Z,1520535621.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:21.055Z,1520535621.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:21.437Z,1520535621.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:21.457Z,1520535621.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:21.815Z,1520535621.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:21.844Z,1520535621.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:22.219Z,1520535622.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:22.250Z,1520535622.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:22.621Z,1520535622.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:22.647Z,1520535622.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:23.013Z,1520535623.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:23.055Z,1520535623.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:23.421Z,1520535623.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:23.466Z,1520535623.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:23.841Z,1520535623.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:23.860Z,1520535623.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:24.228Z,1520535624.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:24.262Z,1520535624.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:24.618Z,1520535624.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:24.655Z,1520535624.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:25.022Z,1520535625.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:25.057Z,1520535625.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:25.420Z,1520535625.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:25.455Z,1520535625.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:25.819Z,1520535625.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:25.835Z,1520535625.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:26.218Z,1520535626.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:26.266Z,1520535626.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:26.635Z,1520535626.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:26.661Z,1520535626.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:27.039Z,1520535627.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:27.064Z,1520535627.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:27.431Z,1520535627.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:27.460Z,1520535627.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:27.822Z,1520535627.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:27.866Z,1520535627.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:28.222Z,1520535628.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:28.264Z,1520535628.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:28.622Z,1520535628.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:28.640Z,1520535628.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:29.025Z,1520535629.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:29.040Z,1520535629.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:32.143Z,1520535632.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:32.169Z,1520535632.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:32.273Z,1520535632.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:32.289Z,1520535632.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:32.637Z,1520535632.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:32.665Z,1520535632.665 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:32.665Z,1520535632.665 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 225
2018-03-08T19:00:32.665Z,1520535632.665 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T19:00:32.667Z,1520535632.667 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:32.667Z,1520535632.667 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 225
2018-03-08T19:00:32.667Z,1520535632.667 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T19:00:32.669Z,1520535632.669 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:32.669Z,1520535632.669 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 225
2018-03-08T19:00:32.669Z,1520535632.669 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T19:00:32.681Z,1520535632.681 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T19:00:32.681Z,1520535632.681 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T19:00:32.681Z,1520535632.681 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T19:00:33.022Z,1520535633.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:33.069Z,1520535633.069 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T19:00:33.069Z,1520535633.069 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 225
2018-03-08T19:00:33.070Z,1520535633.070 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T19:00:33.070Z,1520535633.070 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 225
2018-03-08T19:00:33.070Z,1520535633.070 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T19:00:33.070Z,1520535633.070 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 225
2018-03-08T19:00:33.427Z,1520535633.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:33.465Z,1520535633.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T19:00:33.465Z,1520535633.465 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:00:33.466Z,1520535633.466 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:00:33.466Z,1520535633.466 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T19:00:33.466Z,1520535633.466 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:00:33.467Z,1520535633.467 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:00:33.467Z,1520535633.467 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T19:00:33.467Z,1520535633.467 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:00:33.468Z,1520535633.468 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:00:33.822Z,1520535633.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:33.853Z,1520535633.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T19:00:33.854Z,1520535633.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:34.226Z,1520535634.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:34.253Z,1520535634.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T19:00:34.254Z,1520535634.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:34.639Z,1520535634.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:34.659Z,1520535634.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T19:00:34.660Z,1520535634.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:35.039Z,1520535635.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:35.058Z,1520535635.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T19:00:35.059Z,1520535635.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:35.440Z,1520535635.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:35.462Z,1520535635.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T19:00:35.463Z,1520535635.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:35.825Z,1520535635.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:35.858Z,1520535635.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T19:00:35.859Z,1520535635.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:36.226Z,1520535636.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:36.246Z,1520535636.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T19:00:36.247Z,1520535636.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:36.628Z,1520535636.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:36.643Z,1520535636.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T19:00:36.644Z,1520535636.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:37.030Z,1520535637.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:37.045Z,1520535637.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T19:00:37.046Z,1520535637.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:37.433Z,1520535637.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:37.476Z,1520535637.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T19:00:37.477Z,1520535637.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:37.835Z,1520535637.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:37.863Z,1520535637.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T19:00:37.863Z,1520535637.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:38.236Z,1520535638.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:38.258Z,1520535638.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T19:00:38.259Z,1520535638.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:38.630Z,1520535638.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:38.646Z,1520535638.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T19:00:38.647Z,1520535638.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:39.010Z,1520535639.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:39.051Z,1520535639.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T19:00:39.052Z,1520535639.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:39.426Z,1520535639.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:39.445Z,1520535639.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T19:00:39.446Z,1520535639.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:39.830Z,1520535639.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:39.845Z,1520535639.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T19:00:39.846Z,1520535639.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:40.227Z,1520535640.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:40.242Z,1520535640.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T19:00:40.243Z,1520535640.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:40.636Z,1520535640.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:40.681Z,1520535640.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T19:00:40.682Z,1520535640.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:41.039Z,1520535641.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:41.076Z,1520535641.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T19:00:41.077Z,1520535641.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:41.429Z,1520535641.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:41.459Z,1520535641.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T19:00:41.460Z,1520535641.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:41.830Z,1520535641.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:41.846Z,1520535641.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T19:00:41.847Z,1520535641.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:42.217Z,1520535642.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:42.254Z,1520535642.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T19:00:42.255Z,1520535642.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:42.627Z,1520535642.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:42.647Z,1520535642.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T19:00:42.648Z,1520535642.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:43.031Z,1520535643.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:43.046Z,1520535643.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T19:00:43.047Z,1520535643.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:43.436Z,1520535643.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:43.458Z,1520535643.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T19:00:43.459Z,1520535643.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:43.836Z,1520535643.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:43.867Z,1520535643.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T19:00:43.868Z,1520535643.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:44.239Z,1520535644.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:44.280Z,1520535644.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T19:00:44.281Z,1520535644.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:44.614Z,1520535644.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:44.651Z,1520535644.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T19:00:44.652Z,1520535644.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:45.032Z,1520535645.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:45.047Z,1520535645.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T19:00:45.048Z,1520535645.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:45.412Z,1520535645.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:45.440Z,1520535645.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T19:00:45.442Z,1520535645.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:45.818Z,1520535645.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:45.850Z,1520535645.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T19:00:45.851Z,1520535645.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:46.215Z,1520535646.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:46.247Z,1520535646.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T19:00:46.248Z,1520535646.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:46.639Z,1520535646.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:46.658Z,1520535646.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T19:00:46.659Z,1520535646.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:47.040Z,1520535647.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:47.059Z,1520535647.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T19:00:47.060Z,1520535647.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:47.445Z,1520535647.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:47.459Z,1520535647.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T19:00:47.460Z,1520535647.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:47.813Z,1520535647.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:47.847Z,1520535647.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T19:00:47.848Z,1520535647.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:48.220Z,1520535648.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:48.254Z,1520535648.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T19:00:48.255Z,1520535648.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:48.611Z,1520535648.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:48.655Z,1520535648.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T19:00:48.656Z,1520535648.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:49.012Z,1520535649.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:49.027Z,1520535649.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T19:00:49.028Z,1520535649.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:49.446Z,1520535649.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:49.466Z,1520535649.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T19:00:49.467Z,1520535649.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:49.838Z,1520535649.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:49.859Z,1520535649.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T19:00:49.860Z,1520535649.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:50.240Z,1520535650.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:50.259Z,1520535650.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T19:00:50.260Z,1520535650.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:50.623Z,1520535650.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:50.651Z,1520535650.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T19:00:50.653Z,1520535650.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:51.021Z,1520535651.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:51.055Z,1520535651.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T19:00:51.055Z,1520535651.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:51.411Z,1520535651.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:51.445Z,1520535651.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T19:00:51.446Z,1520535651.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:51.825Z,1520535651.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:51.869Z,1520535651.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T19:00:51.870Z,1520535651.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:52.222Z,1520535652.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:52.242Z,1520535652.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T19:00:52.243Z,1520535652.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:52.639Z,1520535652.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:52.671Z,1520535652.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:53.034Z,1520535653.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:53.065Z,1520535653.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:53.437Z,1520535653.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:53.465Z,1520535653.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:53.811Z,1520535653.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:53.847Z,1520535653.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:54.221Z,1520535654.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:54.245Z,1520535654.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:54.629Z,1520535654.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:54.644Z,1520535654.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:55.013Z,1520535655.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:55.059Z,1520535655.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:55.440Z,1520535655.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:55.466Z,1520535655.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:55.839Z,1520535655.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:55.868Z,1520535655.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:56.238Z,1520535656.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:56.266Z,1520535656.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:56.621Z,1520535656.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:56.661Z,1520535656.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:57.021Z,1520535657.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:57.043Z,1520535657.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:57.418Z,1520535657.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:57.444Z,1520535657.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:57.826Z,1520535657.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:57.843Z,1520535657.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:58.223Z,1520535658.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:58.265Z,1520535658.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:58.624Z,1520535658.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:58.646Z,1520535658.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:59.039Z,1520535659.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:59.067Z,1520535659.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:59.437Z,1520535659.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:59.469Z,1520535659.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:00:59.811Z,1520535659.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:00:59.860Z,1520535659.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:00.220Z,1520535660.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:00.247Z,1520535660.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:00.626Z,1520535660.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:00.643Z,1520535660.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:01.023Z,1520535661.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:01.043Z,1520535661.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:01.432Z,1520535661.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:01.474Z,1520535661.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:01.834Z,1520535661.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:01.875Z,1520535661.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:02.234Z,1520535662.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:02.254Z,1520535662.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:02.631Z,1520535662.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:02.646Z,1520535662.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:03.023Z,1520535663.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:03.051Z,1520535663.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:03.420Z,1520535663.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:03.443Z,1520535663.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:03.823Z,1520535663.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:03.845Z,1520535663.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:04.232Z,1520535664.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:04.247Z,1520535664.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:04.631Z,1520535664.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:04.672Z,1520535664.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:05.035Z,1520535665.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:05.078Z,1520535665.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:05.435Z,1520535665.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:05.450Z,1520535665.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:05.808Z,1520535665.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:05.846Z,1520535665.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:06.227Z,1520535666.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:06.258Z,1520535666.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:06.627Z,1520535666.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:06.648Z,1520535666.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:07.008Z,1520535667.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:07.042Z,1520535667.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:07.430Z,1520535667.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:07.457Z,1520535667.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:07.841Z,1520535667.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:07.860Z,1520535667.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:08.233Z,1520535668.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:08.251Z,1520535668.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:08.615Z,1520535668.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:08.651Z,1520535668.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:09.030Z,1520535669.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:09.045Z,1520535669.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:09.433Z,1520535669.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:09.466Z,1520535669.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:09.843Z,1520535669.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:09.884Z,1520535669.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:10.242Z,1520535670.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:10.258Z,1520535670.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:10.620Z,1520535670.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:10.646Z,1520535670.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:11.015Z,1520535671.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:11.058Z,1520535671.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:11.418Z,1520535671.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:11.450Z,1520535671.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:11.813Z,1520535671.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:11.846Z,1520535671.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:12.221Z,1520535672.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:12.247Z,1520535672.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:12.621Z,1520535672.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:12.654Z,1520535672.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:13.025Z,1520535673.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:13.057Z,1520535673.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:13.443Z,1520535673.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:13.466Z,1520535673.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:13.819Z,1520535673.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:13.851Z,1520535673.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:14.212Z,1520535674.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:14.258Z,1520535674.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:14.615Z,1520535674.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:14.647Z,1520535674.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:15.018Z,1520535675.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:15.056Z,1520535675.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:15.424Z,1520535675.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:15.458Z,1520535675.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:15.829Z,1520535675.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:15.874Z,1520535675.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:16.230Z,1520535676.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:16.271Z,1520535676.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:16.608Z,1520535676.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:16.650Z,1520535676.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:17.016Z,1520535677.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:17.049Z,1520535677.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:17.416Z,1520535677.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:17.458Z,1520535677.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:17.824Z,1520535677.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:17.858Z,1520535677.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:18.224Z,1520535678.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:18.256Z,1520535678.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:18.634Z,1520535678.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:18.660Z,1520535678.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:19.025Z,1520535679.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:19.058Z,1520535679.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:19.435Z,1520535679.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:19.461Z,1520535679.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:19.821Z,1520535679.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:19.859Z,1520535679.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:20.225Z,1520535680.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:20.256Z,1520535680.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:20.623Z,1520535680.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:20.666Z,1520535680.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:21.022Z,1520535681.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:21.064Z,1520535681.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:21.432Z,1520535681.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:21.459Z,1520535681.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:21.834Z,1520535681.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:21.856Z,1520535681.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:22.232Z,1520535682.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:22.259Z,1520535682.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:22.623Z,1520535682.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:22.662Z,1520535682.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:23.024Z,1520535683.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:23.062Z,1520535683.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:23.423Z,1520535683.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:23.438Z,1520535683.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:23.814Z,1520535683.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:23.861Z,1520535683.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:24.221Z,1520535684.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:24.260Z,1520535684.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:24.636Z,1520535684.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:24.664Z,1520535684.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:25.031Z,1520535685.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:25.065Z,1520535685.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:25.433Z,1520535685.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:25.463Z,1520535685.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:25.821Z,1520535685.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:25.864Z,1520535685.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:26.225Z,1520535686.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:26.242Z,1520535686.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:26.627Z,1520535686.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:26.642Z,1520535686.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:27.022Z,1520535687.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:27.055Z,1520535687.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:27.426Z,1520535687.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:27.447Z,1520535687.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:27.839Z,1520535687.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:27.871Z,1520535687.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:28.245Z,1520535688.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:28.275Z,1520535688.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:28.620Z,1520535688.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:28.655Z,1520535688.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:28.674Z,1520535688.674 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T19:01:28.674Z,1520535688.674 [Default:CheckIn:C.Wait] Stopped
2018-03-08T19:01:28.674Z,1520535688.674 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T19:01:28.674Z,1520535688.674 [Default:CheckIn:D] Running Loop=1
2018-03-08T19:01:29.026Z,1520535689.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:29.046Z,1520535689.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:29.049Z,1520535689.049 [Default:CheckIn:D] Stopped
2018-03-08T19:01:29.050Z,1520535689.050 [Default:CheckIn:E] Running Loop=1
2018-03-08T19:01:29.430Z,1520535689.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:29.446Z,1520535689.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:29.450Z,1520535689.450 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 675.737435 min 
2018-03-08T19:01:29.450Z,1520535689.450 [Default:CheckIn:E] Stopped
2018-03-08T19:01:29.450Z,1520535689.450 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T19:01:29.450Z,1520535689.450 [Default:CheckIn] Stopped
2018-03-08T19:01:29.450Z,1520535689.450 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T19:01:29.450Z,1520535689.450 [Default:CheckIn](INFO): Running loop #66
2018-03-08T19:01:29.450Z,1520535689.450 [Default:CheckIn] Running Loop=66
2018-03-08T19:01:29.451Z,1520535689.451 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T19:01:29.451Z,1520535689.451 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T19:01:32.521Z,1520535692.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:32.537Z,1520535692.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:32.644Z,1520535692.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:32.660Z,1520535692.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:33.011Z,1520535693.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:33.037Z,1520535693.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:33.397Z,1520535693.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:33.429Z,1520535693.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:33.794Z,1520535693.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:33.810Z,1520535693.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:34.196Z,1520535694.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:34.211Z,1520535694.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:34.592Z,1520535694.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:34.607Z,1520535694.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:34.985Z,1520535694.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:35.006Z,1520535695.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:35.409Z,1520535695.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:35.444Z,1520535695.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:35.801Z,1520535695.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:35.816Z,1520535695.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:36.198Z,1520535696.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:36.225Z,1520535696.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:36.595Z,1520535696.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:36.610Z,1520535696.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:36.990Z,1520535696.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:37.007Z,1520535697.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:37.400Z,1520535697.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:37.416Z,1520535697.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:37.804Z,1520535697.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:37.824Z,1520535697.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:38.201Z,1520535698.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:38.222Z,1520535698.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:38.595Z,1520535698.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:38.610Z,1520535698.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:39.001Z,1520535699.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:39.017Z,1520535699.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:39.405Z,1520535699.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:39.425Z,1520535699.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:39.798Z,1520535699.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:39.813Z,1520535699.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:40.205Z,1520535700.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:40.221Z,1520535700.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:40.596Z,1520535700.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:40.611Z,1520535700.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:40.980Z,1520535700.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:41.006Z,1520535701.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:41.405Z,1520535701.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:41.421Z,1520535701.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:41.805Z,1520535701.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:41.820Z,1520535701.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:42.202Z,1520535702.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:42.217Z,1520535702.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:42.589Z,1520535702.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:42.609Z,1520535702.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:42.994Z,1520535702.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:43.009Z,1520535703.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:43.400Z,1520535703.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:43.416Z,1520535703.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:43.803Z,1520535703.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:43.829Z,1520535703.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:44.204Z,1520535704.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:44.230Z,1520535704.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:44.589Z,1520535704.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:44.608Z,1520535704.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:44.999Z,1520535704.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:45.014Z,1520535705.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:45.402Z,1520535705.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:45.417Z,1520535705.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:45.804Z,1520535705.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:45.828Z,1520535705.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:46.201Z,1520535706.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:46.251Z,1520535706.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:46.583Z,1520535706.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:46.611Z,1520535706.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:46.980Z,1520535706.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:47.008Z,1520535707.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:47.405Z,1520535707.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:47.425Z,1520535707.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:47.809Z,1520535707.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:47.824Z,1520535707.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:48.197Z,1520535708.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:48.219Z,1520535708.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:48.583Z,1520535708.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:48.610Z,1520535708.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:48.978Z,1520535708.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:49.014Z,1520535709.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:49.397Z,1520535709.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:49.420Z,1520535709.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:49.808Z,1520535709.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:49.824Z,1520535709.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:50.205Z,1520535710.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:50.231Z,1520535710.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:50.581Z,1520535710.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:50.607Z,1520535710.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:50.983Z,1520535710.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:51.010Z,1520535711.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:51.406Z,1520535711.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:51.426Z,1520535711.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:51.809Z,1520535711.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:51.833Z,1520535711.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:52.201Z,1520535712.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:52.222Z,1520535712.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:52.583Z,1520535712.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:52.615Z,1520535712.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:52.978Z,1520535712.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:53.014Z,1520535713.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:53.401Z,1520535713.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:53.416Z,1520535713.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:53.802Z,1520535713.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:53.822Z,1520535713.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:54.197Z,1520535714.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:54.220Z,1520535714.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:54.583Z,1520535714.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:54.611Z,1520535714.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:54.986Z,1520535714.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:55.019Z,1520535715.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:55.389Z,1520535715.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:55.426Z,1520535715.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:55.814Z,1520535715.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:55.842Z,1520535715.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:56.197Z,1520535716.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:56.232Z,1520535716.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:56.587Z,1520535716.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:56.603Z,1520535716.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:56.988Z,1520535716.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:57.003Z,1520535717.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:57.401Z,1520535717.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:57.434Z,1520535717.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:57.793Z,1520535717.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:57.809Z,1520535717.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:57.835Z,1520535717.835 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T19:01:58.206Z,1520535718.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:58.241Z,1520535718.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:58.593Z,1520535718.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:58.608Z,1520535718.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:58.981Z,1520535718.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:59.013Z,1520535719.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:59.405Z,1520535719.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:59.420Z,1520535719.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:01:59.800Z,1520535719.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:01:59.815Z,1520535719.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:00.198Z,1520535720.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:00.218Z,1520535720.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:00.595Z,1520535720.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:00.610Z,1520535720.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:00.988Z,1520535720.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:01.004Z,1520535721.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:01.398Z,1520535721.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:01.414Z,1520535721.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:01.801Z,1520535721.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:01.822Z,1520535721.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:02.201Z,1520535722.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:02.217Z,1520535722.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:02.590Z,1520535722.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:02.612Z,1520535722.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:02.990Z,1520535722.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:03.011Z,1520535723.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:03.401Z,1520535723.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:03.422Z,1520535723.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:03.796Z,1520535723.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:03.813Z,1520535723.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:04.198Z,1520535724.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:04.220Z,1520535724.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:04.583Z,1520535724.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:04.611Z,1520535724.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:04.980Z,1520535724.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:05.008Z,1520535725.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:05.405Z,1520535725.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:05.421Z,1520535725.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:05.802Z,1520535725.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:05.817Z,1520535725.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:06.197Z,1520535726.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:06.219Z,1520535726.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:06.583Z,1520535726.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:06.611Z,1520535726.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:06.978Z,1520535726.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:07.011Z,1520535727.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:07.397Z,1520535727.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:07.420Z,1520535727.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:07.810Z,1520535727.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:07.833Z,1520535727.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:08.206Z,1520535728.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:08.230Z,1520535728.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:08.588Z,1520535728.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:08.615Z,1520535728.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:08.983Z,1520535728.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:09.009Z,1520535729.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:09.402Z,1520535729.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:09.417Z,1520535729.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:09.809Z,1520535729.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:09.829Z,1520535729.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:10.205Z,1520535730.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:10.255Z,1520535730.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:10.600Z,1520535730.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:10.615Z,1520535730.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:10.980Z,1520535730.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:11.008Z,1520535731.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:11.404Z,1520535731.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:11.425Z,1520535731.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:11.805Z,1520535731.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:11.821Z,1520535731.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:12.190Z,1520535732.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:12.223Z,1520535732.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:12.587Z,1520535732.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:12.615Z,1520535732.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:12.978Z,1520535732.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:13.021Z,1520535733.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:13.401Z,1520535733.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:13.417Z,1520535733.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:13.805Z,1520535733.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:13.820Z,1520535733.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:14.189Z,1520535734.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:14.216Z,1520535734.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:14.587Z,1520535734.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:14.618Z,1520535734.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:14.982Z,1520535734.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:15.014Z,1520535735.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:15.389Z,1520535735.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:15.424Z,1520535735.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:15.789Z,1520535735.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:15.827Z,1520535735.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:16.197Z,1520535736.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:16.224Z,1520535736.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:16.579Z,1520535736.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:16.615Z,1520535736.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:16.980Z,1520535736.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:17.004Z,1520535737.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:17.406Z,1520535737.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:17.423Z,1520535737.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:17.793Z,1520535737.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:17.825Z,1520535737.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:18.194Z,1520535738.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:18.227Z,1520535738.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:18.587Z,1520535738.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:18.618Z,1520535738.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:18.978Z,1520535738.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:19.024Z,1520535739.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:19.389Z,1520535739.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:19.431Z,1520535739.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:19.809Z,1520535739.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:19.824Z,1520535739.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:20.194Z,1520535740.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:20.221Z,1520535740.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:20.587Z,1520535740.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:20.618Z,1520535740.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:20.987Z,1520535740.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:21.025Z,1520535741.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:21.397Z,1520535741.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:21.424Z,1520535741.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:21.793Z,1520535741.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:21.819Z,1520535741.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:22.198Z,1520535742.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:22.237Z,1520535742.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:22.583Z,1520535742.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:22.598Z,1520535742.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:22.979Z,1520535742.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:23.003Z,1520535743.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:23.401Z,1520535743.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:23.433Z,1520535743.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:23.805Z,1520535743.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:23.846Z,1520535743.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:24.193Z,1520535744.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:24.240Z,1520535744.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:24.590Z,1520535744.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:24.605Z,1520535744.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:24.990Z,1520535744.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:25.020Z,1520535745.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:25.397Z,1520535745.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:25.412Z,1520535745.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:25.802Z,1520535745.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:25.842Z,1520535745.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:26.201Z,1520535746.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:26.217Z,1520535746.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:26.596Z,1520535746.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:26.611Z,1520535746.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:26.992Z,1520535746.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:27.007Z,1520535747.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:27.401Z,1520535747.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:27.422Z,1520535747.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:27.798Z,1520535747.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:27.821Z,1520535747.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:28.204Z,1520535748.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:28.220Z,1520535748.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:28.589Z,1520535748.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:28.622Z,1520535748.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:28.980Z,1520535748.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:29.022Z,1520535749.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:29.405Z,1520535749.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:29.421Z,1520535749.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:29.803Z,1520535749.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:29.825Z,1520535749.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:32.904Z,1520535752.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:32.919Z,1520535752.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:33.022Z,1520535753.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:33.062Z,1520535753.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:33.376Z,1520535753.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:33.410Z,1520535753.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:33.775Z,1520535753.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:33.790Z,1520535753.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:34.170Z,1520535754.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:34.186Z,1520535754.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:34.593Z,1520535754.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:34.623Z,1520535754.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:34.981Z,1520535754.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:34.996Z,1520535754.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:35.378Z,1520535755.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:35.393Z,1520535755.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:35.776Z,1520535755.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:35.791Z,1520535755.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:36.175Z,1520535756.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:36.191Z,1520535756.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:36.574Z,1520535756.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:36.599Z,1520535756.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:36.975Z,1520535756.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:36.994Z,1520535756.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:37.382Z,1520535757.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:37.397Z,1520535757.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:37.782Z,1520535757.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:37.797Z,1520535757.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:38.181Z,1520535758.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:38.197Z,1520535758.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:38.580Z,1520535758.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:38.596Z,1520535758.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:38.972Z,1520535758.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:38.999Z,1520535758.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:39.385Z,1520535759.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:39.400Z,1520535759.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:39.786Z,1520535759.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:39.801Z,1520535759.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:40.186Z,1520535760.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:40.201Z,1520535760.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:40.574Z,1520535760.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:40.594Z,1520535760.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:40.975Z,1520535760.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:40.990Z,1520535760.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:41.385Z,1520535761.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:41.402Z,1520535761.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:41.785Z,1520535761.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:41.801Z,1520535761.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:42.186Z,1520535762.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:42.202Z,1520535762.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:42.574Z,1520535762.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:42.594Z,1520535762.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:42.975Z,1520535762.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:42.990Z,1520535762.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:43.385Z,1520535763.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:43.401Z,1520535763.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:43.781Z,1520535763.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:43.809Z,1520535763.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:44.190Z,1520535764.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:44.216Z,1520535764.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:44.581Z,1520535764.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:44.596Z,1520535764.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:44.965Z,1520535764.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:45.000Z,1520535765.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:45.389Z,1520535765.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:45.404Z,1520535765.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:45.787Z,1520535765.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:45.802Z,1520535765.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:46.182Z,1520535766.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:46.210Z,1520535766.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:46.571Z,1520535766.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:46.599Z,1520535766.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:46.966Z,1520535766.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:47.000Z,1520535767.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:47.387Z,1520535767.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:47.402Z,1520535767.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:47.786Z,1520535767.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:47.817Z,1520535767.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:48.192Z,1520535768.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:48.207Z,1520535768.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:48.564Z,1520535768.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:48.580Z,1520535768.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:48.971Z,1520535768.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:49.003Z,1520535769.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:49.370Z,1520535769.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:49.385Z,1520535769.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:49.773Z,1520535769.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:49.811Z,1520535769.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:50.199Z,1520535770.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:50.218Z,1520535770.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:50.580Z,1520535770.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:50.611Z,1520535770.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:50.963Z,1520535770.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:50.978Z,1520535770.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:51.372Z,1520535771.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:51.387Z,1520535771.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:51.775Z,1520535771.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:51.790Z,1520535771.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:52.164Z,1520535772.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:52.191Z,1520535772.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:52.589Z,1520535772.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:52.621Z,1520535772.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:52.985Z,1520535772.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:53.000Z,1520535773.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:53.384Z,1520535773.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:53.399Z,1520535773.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:53.779Z,1520535773.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:53.798Z,1520535773.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:54.180Z,1520535774.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:54.195Z,1520535774.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:54.580Z,1520535774.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:54.595Z,1520535774.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:54.974Z,1520535774.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:54.994Z,1520535774.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:55.385Z,1520535775.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:55.400Z,1520535775.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:55.782Z,1520535775.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:55.797Z,1520535775.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:56.185Z,1520535776.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:56.200Z,1520535776.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:56.581Z,1520535776.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:56.596Z,1520535776.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:56.960Z,1520535776.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:56.991Z,1520535776.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:57.385Z,1520535777.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:57.406Z,1520535777.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:57.785Z,1520535777.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:57.801Z,1520535777.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:58.185Z,1520535778.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:58.200Z,1520535778.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:58.576Z,1520535778.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:58.592Z,1520535778.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:58.969Z,1520535778.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:59.004Z,1520535779.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:59.385Z,1520535779.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:59.400Z,1520535779.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:02:59.785Z,1520535779.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:02:59.801Z,1520535779.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:00.185Z,1520535780.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:00.206Z,1520535780.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:00.581Z,1520535780.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:00.596Z,1520535780.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:00.979Z,1520535780.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:00.994Z,1520535780.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:01.385Z,1520535781.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:01.401Z,1520535781.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:01.782Z,1520535781.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:01.802Z,1520535781.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:02.185Z,1520535782.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:02.200Z,1520535782.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:02.576Z,1520535782.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:02.598Z,1520535782.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:02.972Z,1520535782.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:02.988Z,1520535782.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:03.385Z,1520535783.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:03.400Z,1520535783.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:03.785Z,1520535783.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:03.800Z,1520535783.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:04.185Z,1520535784.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:04.200Z,1520535784.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:04.580Z,1520535784.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:04.595Z,1520535784.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:04.973Z,1520535784.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:04.994Z,1520535784.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:05.385Z,1520535785.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:05.401Z,1520535785.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:05.788Z,1520535785.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:05.804Z,1520535785.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:06.187Z,1520535786.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:06.202Z,1520535786.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:06.573Z,1520535786.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:06.601Z,1520535786.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:06.970Z,1520535786.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:06.997Z,1520535786.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:07.387Z,1520535787.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:07.403Z,1520535787.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:07.784Z,1520535787.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:07.799Z,1520535787.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:08.182Z,1520535788.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:08.205Z,1520535788.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:08.567Z,1520535788.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:08.607Z,1520535788.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:08.970Z,1520535788.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:08.997Z,1520535788.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:09.386Z,1520535789.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:09.401Z,1520535789.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:09.792Z,1520535789.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:09.812Z,1520535789.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:10.187Z,1520535790.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:10.202Z,1520535790.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:10.567Z,1520535790.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:10.599Z,1520535790.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:10.966Z,1520535790.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:11.003Z,1520535791.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:11.389Z,1520535791.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:11.407Z,1520535791.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:11.789Z,1520535791.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:11.810Z,1520535791.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:12.178Z,1520535792.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:12.207Z,1520535792.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:12.567Z,1520535792.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:12.595Z,1520535792.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:12.970Z,1520535792.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:13.006Z,1520535793.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:13.381Z,1520535793.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:13.414Z,1520535793.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:13.794Z,1520535793.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:13.810Z,1520535793.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:14.179Z,1520535794.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:14.205Z,1520535794.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:14.566Z,1520535794.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:14.582Z,1520535794.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:14.970Z,1520535794.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:14.987Z,1520535794.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:15.385Z,1520535795.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:15.408Z,1520535795.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:15.785Z,1520535795.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:15.811Z,1520535795.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:16.186Z,1520535796.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:16.218Z,1520535796.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:16.573Z,1520535796.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:16.589Z,1520535796.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:16.972Z,1520535796.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:16.988Z,1520535796.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:17.381Z,1520535797.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:17.397Z,1520535797.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:17.789Z,1520535797.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:17.804Z,1520535797.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:18.182Z,1520535798.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:18.203Z,1520535798.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:18.581Z,1520535798.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:18.596Z,1520535798.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:18.980Z,1520535798.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:18.996Z,1520535798.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:19.385Z,1520535799.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:19.401Z,1520535799.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:19.786Z,1520535799.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:19.801Z,1520535799.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:20.184Z,1520535800.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:20.207Z,1520535800.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:20.580Z,1520535800.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:20.596Z,1520535800.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:20.969Z,1520535800.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:20.992Z,1520535800.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:21.384Z,1520535801.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:21.399Z,1520535801.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:21.789Z,1520535801.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:21.804Z,1520535801.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:22.190Z,1520535802.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:22.205Z,1520535802.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:22.580Z,1520535802.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:22.595Z,1520535802.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:22.973Z,1520535802.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:22.998Z,1520535802.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:23.389Z,1520535803.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:23.404Z,1520535803.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:23.789Z,1520535803.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:23.804Z,1520535803.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:24.186Z,1520535804.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:24.201Z,1520535804.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:24.575Z,1520535804.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:24.595Z,1520535804.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:24.969Z,1520535804.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:25.001Z,1520535805.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:25.387Z,1520535805.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:25.402Z,1520535805.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:25.791Z,1520535805.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:25.810Z,1520535805.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:26.185Z,1520535806.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:26.205Z,1520535806.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:26.567Z,1520535806.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:26.601Z,1520535806.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:26.970Z,1520535806.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:26.997Z,1520535806.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:27.386Z,1520535807.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:27.407Z,1520535807.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:27.789Z,1520535807.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:27.805Z,1520535807.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:28.190Z,1520535808.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:28.205Z,1520535808.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:28.568Z,1520535808.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:28.599Z,1520535808.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:28.970Z,1520535808.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:29.004Z,1520535809.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:29.389Z,1520535809.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:29.405Z,1520535809.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:29.789Z,1520535809.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:29.808Z,1520535809.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:30.190Z,1520535810.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:30.205Z,1520535810.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:33.286Z,1520535813.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:33.302Z,1520535813.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:33.396Z,1520535813.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:33.439Z,1520535813.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:33.773Z,1520535813.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:33.797Z,1520535813.797 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:33.797Z,1520535813.797 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 226
2018-03-08T19:03:33.797Z,1520535813.797 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T19:03:33.799Z,1520535813.799 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:33.799Z,1520535813.799 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 226
2018-03-08T19:03:33.799Z,1520535813.799 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T19:03:33.801Z,1520535813.801 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:33.801Z,1520535813.801 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 226
2018-03-08T19:03:33.801Z,1520535813.801 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T19:03:33.813Z,1520535813.813 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T19:03:33.813Z,1520535813.813 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T19:03:33.813Z,1520535813.813 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T19:03:34.177Z,1520535814.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:34.212Z,1520535814.212 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T19:03:34.212Z,1520535814.212 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 226
2018-03-08T19:03:34.213Z,1520535814.213 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T19:03:34.213Z,1520535814.213 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 226
2018-03-08T19:03:34.213Z,1520535814.213 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T19:03:34.213Z,1520535814.213 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 226
2018-03-08T19:03:34.573Z,1520535814.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:34.594Z,1520535814.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T19:03:34.595Z,1520535814.595 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:03:34.595Z,1520535814.595 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:03:34.595Z,1520535814.595 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T19:03:34.596Z,1520535814.596 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:03:34.596Z,1520535814.596 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:03:34.597Z,1520535814.597 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T19:03:34.597Z,1520535814.597 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:03:34.597Z,1520535814.597 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:03:34.960Z,1520535814.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:34.975Z,1520535814.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T19:03:34.976Z,1520535814.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:35.358Z,1520535815.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:35.378Z,1520535815.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T19:03:35.379Z,1520535815.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:35.758Z,1520535815.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:35.776Z,1520535815.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T19:03:35.777Z,1520535815.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:36.160Z,1520535816.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:36.175Z,1520535816.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T19:03:36.176Z,1520535816.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:36.565Z,1520535816.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:36.603Z,1520535816.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T19:03:36.604Z,1520535816.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:36.961Z,1520535816.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:36.976Z,1520535816.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T19:03:36.977Z,1520535816.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:37.365Z,1520535817.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:37.380Z,1520535817.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T19:03:37.381Z,1520535817.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:37.758Z,1520535817.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:37.785Z,1520535817.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T19:03:37.786Z,1520535817.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:38.155Z,1520535818.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:38.182Z,1520535818.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T19:03:38.183Z,1520535818.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:38.551Z,1520535818.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:38.586Z,1520535818.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T19:03:38.587Z,1520535818.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:38.952Z,1520535818.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:38.992Z,1520535818.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T19:03:38.993Z,1520535818.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:39.349Z,1520535819.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:39.382Z,1520535819.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T19:03:39.383Z,1520535819.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:39.773Z,1520535819.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:39.788Z,1520535819.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T19:03:39.789Z,1520535819.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:40.175Z,1520535820.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:40.190Z,1520535820.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T19:03:40.191Z,1520535820.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:40.573Z,1520535820.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:40.588Z,1520535820.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T19:03:40.589Z,1520535820.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:40.951Z,1520535820.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:40.977Z,1520535820.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T19:03:40.978Z,1520535820.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:41.371Z,1520535821.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:41.386Z,1520535821.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T19:03:41.387Z,1520535821.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:41.752Z,1520535821.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:41.783Z,1520535821.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T19:03:41.784Z,1520535821.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:42.151Z,1520535822.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:42.183Z,1520535822.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T19:03:42.184Z,1520535822.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:42.574Z,1520535822.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:42.589Z,1520535822.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T19:03:42.590Z,1520535822.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:42.969Z,1520535822.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:42.991Z,1520535822.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T19:03:42.992Z,1520535822.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:43.370Z,1520535823.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:43.391Z,1520535823.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T19:03:43.392Z,1520535823.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:43.751Z,1520535823.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:43.782Z,1520535823.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T19:03:43.783Z,1520535823.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:44.147Z,1520535824.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:44.162Z,1520535824.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T19:03:44.163Z,1520535824.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:44.551Z,1520535824.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:44.566Z,1520535824.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T19:03:44.567Z,1520535824.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:44.952Z,1520535824.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:44.968Z,1520535824.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T19:03:44.969Z,1520535824.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:45.356Z,1520535825.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:45.371Z,1520535825.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T19:03:45.372Z,1520535825.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:45.769Z,1520535825.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:45.800Z,1520535825.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T19:03:45.805Z,1520535825.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:46.182Z,1520535826.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:46.213Z,1520535826.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T19:03:46.214Z,1520535826.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:46.572Z,1520535826.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:46.594Z,1520535826.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T19:03:46.595Z,1520535826.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:46.954Z,1520535826.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:46.994Z,1520535826.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T19:03:46.995Z,1520535826.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:47.358Z,1520535827.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:47.394Z,1520535827.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T19:03:47.395Z,1520535827.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:47.758Z,1520535827.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:47.778Z,1520535827.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T19:03:47.779Z,1520535827.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:48.158Z,1520535828.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:48.172Z,1520535828.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T19:03:48.174Z,1520535828.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:48.557Z,1520535828.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:48.573Z,1520535828.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T19:03:48.574Z,1520535828.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:48.969Z,1520535828.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:48.984Z,1520535828.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T19:03:49.001Z,1520535829.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:49.365Z,1520535829.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:49.485Z,1520535829.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T19:03:49.486Z,1520535829.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:49.762Z,1520535829.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:49.782Z,1520535829.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T19:03:49.783Z,1520535829.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:50.159Z,1520535830.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:50.174Z,1520535830.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T19:03:50.175Z,1520535830.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:50.563Z,1520535830.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:50.577Z,1520535830.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T19:03:50.578Z,1520535830.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:50.962Z,1520535830.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:50.977Z,1520535830.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T19:03:50.978Z,1520535830.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:51.359Z,1520535831.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:51.384Z,1520535831.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T19:03:51.385Z,1520535831.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:51.770Z,1520535831.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:51.785Z,1520535831.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T19:03:51.786Z,1520535831.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:52.170Z,1520535832.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:52.185Z,1520535832.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T19:03:52.186Z,1520535832.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:52.573Z,1520535832.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:52.588Z,1520535832.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T19:03:52.589Z,1520535832.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:52.961Z,1520535832.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:52.976Z,1520535832.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T19:03:52.977Z,1520535832.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:53.361Z,1520535833.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:53.383Z,1520535833.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T19:03:53.384Z,1520535833.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:53.759Z,1520535833.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:53.779Z,1520535833.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T19:03:53.780Z,1520535833.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:54.155Z,1520535834.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:54.187Z,1520535834.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:54.576Z,1520535834.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:54.599Z,1520535834.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:54.974Z,1520535834.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:54.989Z,1520535834.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:55.375Z,1520535835.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:55.390Z,1520535835.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:55.751Z,1520535835.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:55.780Z,1520535835.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:56.151Z,1520535836.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:56.171Z,1520535836.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:56.559Z,1520535836.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:56.576Z,1520535836.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:56.961Z,1520535836.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:56.975Z,1520535836.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:57.360Z,1520535837.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:57.375Z,1520535837.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:57.776Z,1520535837.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:57.812Z,1520535837.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:58.176Z,1520535838.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:58.229Z,1520535838.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:58.570Z,1520535838.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:58.614Z,1520535838.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:58.956Z,1520535838.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:58.992Z,1520535838.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:59.353Z,1520535839.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:59.401Z,1520535839.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:03:59.752Z,1520535839.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:03:59.779Z,1520535839.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:00.182Z,1520535840.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:00.237Z,1520535840.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:00.588Z,1520535840.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:00.643Z,1520535840.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:00.965Z,1520535840.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:01.054Z,1520535841.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:01.368Z,1520535841.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:01.407Z,1520535841.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:01.758Z,1520535841.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:01.773Z,1520535841.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:02.159Z,1520535842.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:02.179Z,1520535842.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:02.557Z,1520535842.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:02.578Z,1520535842.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:02.964Z,1520535842.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:02.980Z,1520535842.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:03.360Z,1520535843.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:03.375Z,1520535843.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:03.766Z,1520535843.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:03.781Z,1520535843.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:04.165Z,1520535844.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:04.181Z,1520535844.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:04.565Z,1520535844.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:04.581Z,1520535844.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:04.957Z,1520535844.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:04.977Z,1520535844.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:05.360Z,1520535845.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:05.375Z,1520535845.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:05.760Z,1520535845.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:05.775Z,1520535845.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:06.164Z,1520535846.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:06.185Z,1520535846.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:06.572Z,1520535846.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:06.588Z,1520535846.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:06.972Z,1520535846.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:06.987Z,1520535846.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:07.372Z,1520535847.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:07.387Z,1520535847.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:07.760Z,1520535847.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:07.775Z,1520535847.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:08.157Z,1520535848.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:08.179Z,1520535848.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:08.555Z,1520535848.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:08.578Z,1520535848.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:08.961Z,1520535848.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:08.976Z,1520535848.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:09.359Z,1520535849.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:09.378Z,1520535849.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:09.772Z,1520535849.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:09.787Z,1520535849.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:10.172Z,1520535850.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:10.188Z,1520535850.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:10.572Z,1520535850.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:10.587Z,1520535850.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:10.957Z,1520535850.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:10.985Z,1520535850.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:11.351Z,1520535851.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:11.378Z,1520535851.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:11.752Z,1520535851.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:11.779Z,1520535851.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:12.151Z,1520535852.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:12.181Z,1520535852.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:12.574Z,1520535852.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:12.589Z,1520535852.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:12.974Z,1520535852.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:12.994Z,1520535852.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:13.373Z,1520535853.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:13.394Z,1520535853.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:13.751Z,1520535853.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:13.779Z,1520535853.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:14.151Z,1520535854.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:14.178Z,1520535854.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:14.561Z,1520535854.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:14.582Z,1520535854.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:14.951Z,1520535854.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:14.987Z,1520535854.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:15.351Z,1520535855.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:15.378Z,1520535855.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:15.773Z,1520535855.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:15.795Z,1520535855.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:16.174Z,1520535856.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:16.189Z,1520535856.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:16.573Z,1520535856.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:16.594Z,1520535856.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:16.951Z,1520535856.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:16.978Z,1520535856.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:17.351Z,1520535857.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:17.379Z,1520535857.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:17.752Z,1520535857.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:17.786Z,1520535857.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:18.151Z,1520535858.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:18.183Z,1520535858.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:18.574Z,1520535858.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:18.594Z,1520535858.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:18.973Z,1520535858.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:18.988Z,1520535858.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:19.373Z,1520535859.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:19.388Z,1520535859.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:19.761Z,1520535859.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:19.786Z,1520535859.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:20.151Z,1520535860.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:20.178Z,1520535860.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:20.552Z,1520535860.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:20.587Z,1520535860.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:20.951Z,1520535860.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:20.979Z,1520535860.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:21.351Z,1520535861.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:21.378Z,1520535861.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:21.773Z,1520535861.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:21.788Z,1520535861.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:22.174Z,1520535862.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:22.190Z,1520535862.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:22.574Z,1520535862.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:22.594Z,1520535862.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:22.951Z,1520535862.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:22.977Z,1520535862.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:23.351Z,1520535863.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:23.379Z,1520535863.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:23.752Z,1520535863.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:23.779Z,1520535863.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:24.157Z,1520535864.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:24.179Z,1520535864.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:24.574Z,1520535864.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:24.589Z,1520535864.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:24.973Z,1520535864.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:24.994Z,1520535864.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:25.373Z,1520535865.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:25.389Z,1520535865.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:25.751Z,1520535865.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:25.778Z,1520535865.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:26.151Z,1520535866.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:26.179Z,1520535866.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:26.551Z,1520535866.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:26.582Z,1520535866.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:26.951Z,1520535866.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:26.978Z,1520535866.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:27.351Z,1520535867.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:27.378Z,1520535867.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:27.773Z,1520535867.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:27.788Z,1520535867.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:28.174Z,1520535868.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:28.189Z,1520535868.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:28.573Z,1520535868.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:28.594Z,1520535868.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:28.951Z,1520535868.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:28.977Z,1520535868.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:29.351Z,1520535869.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:29.379Z,1520535869.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:29.752Z,1520535869.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:29.779Z,1520535869.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:30.151Z,1520535870.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:30.179Z,1520535870.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:30.575Z,1520535870.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:30.590Z,1520535870.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:33.926Z,1520535873.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:33.942Z,1520535873.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:34.049Z,1520535874.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:34.079Z,1520535874.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:34.411Z,1520535874.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:34.499Z,1520535874.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:34.816Z,1520535874.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:34.831Z,1520535874.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:35.204Z,1520535875.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:35.231Z,1520535875.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:35.620Z,1520535875.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:35.636Z,1520535875.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:36.025Z,1520535876.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:36.040Z,1520535876.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:36.421Z,1520535876.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:36.436Z,1520535876.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:36.802Z,1520535876.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:36.834Z,1520535876.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:37.203Z,1520535877.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:37.235Z,1520535877.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:37.615Z,1520535877.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:37.638Z,1520535877.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:38.002Z,1520535878.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:38.034Z,1520535878.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:38.421Z,1520535878.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:38.437Z,1520535878.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:38.820Z,1520535878.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:38.842Z,1520535878.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:39.225Z,1520535879.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:39.240Z,1520535879.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:39.602Z,1520535879.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:39.630Z,1520535879.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:40.016Z,1520535880.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:40.031Z,1520535880.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:40.402Z,1520535880.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:40.434Z,1520535880.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:40.826Z,1520535880.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:40.841Z,1520535880.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:41.221Z,1520535881.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:41.236Z,1520535881.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:41.620Z,1520535881.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:41.635Z,1520535881.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:42.003Z,1520535882.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:42.038Z,1520535882.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:42.414Z,1520535882.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:42.434Z,1520535882.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:42.803Z,1520535882.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:42.827Z,1520535882.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:43.202Z,1520535883.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:43.235Z,1520535883.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:43.621Z,1520535883.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:43.637Z,1520535883.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:44.025Z,1520535884.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:44.041Z,1520535884.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:44.422Z,1520535884.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:44.437Z,1520535884.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:44.800Z,1520535884.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:44.834Z,1520535884.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:45.222Z,1520535885.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:45.251Z,1520535885.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:45.606Z,1520535885.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:45.639Z,1520535885.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:45.999Z,1520535885.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:46.027Z,1520535886.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:46.406Z,1520535886.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:46.438Z,1520535886.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:46.814Z,1520535886.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:46.851Z,1520535886.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:47.217Z,1520535887.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:47.247Z,1520535887.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:47.627Z,1520535887.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:47.646Z,1520535887.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:48.010Z,1520535888.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:48.041Z,1520535888.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:48.410Z,1520535888.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:48.440Z,1520535888.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:48.811Z,1520535888.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:48.841Z,1520535888.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:49.210Z,1520535889.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:49.242Z,1520535889.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:49.627Z,1520535889.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:49.643Z,1520535889.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:50.030Z,1520535890.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:50.046Z,1520535890.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:50.428Z,1520535890.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:50.443Z,1520535890.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:50.808Z,1520535890.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:50.827Z,1520535890.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:51.214Z,1520535891.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:51.243Z,1520535891.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:51.616Z,1520535891.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:51.632Z,1520535891.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:52.015Z,1520535892.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:52.031Z,1520535892.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:52.410Z,1520535892.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:52.425Z,1520535892.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:52.821Z,1520535892.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:52.837Z,1520535892.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:53.219Z,1520535893.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:53.235Z,1520535893.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:53.620Z,1520535893.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:53.636Z,1520535893.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:54.015Z,1520535894.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:54.030Z,1520535894.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:54.411Z,1520535894.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:54.426Z,1520535894.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:54.809Z,1520535894.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:54.838Z,1520535894.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:55.215Z,1520535895.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:55.231Z,1520535895.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:55.616Z,1520535895.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:55.632Z,1520535895.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:56.021Z,1520535896.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:56.036Z,1520535896.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:56.420Z,1520535896.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:56.443Z,1520535896.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:56.814Z,1520535896.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:56.835Z,1520535896.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:57.213Z,1520535897.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:57.229Z,1520535897.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:57.606Z,1520535897.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:57.635Z,1520535897.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:58.009Z,1520535898.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:58.033Z,1520535898.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:58.416Z,1520535898.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:58.433Z,1520535898.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:58.820Z,1520535898.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:58.843Z,1520535898.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:59.228Z,1520535899.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:59.243Z,1520535899.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:04:59.623Z,1520535899.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:04:59.638Z,1520535899.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:00.016Z,1520535900.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:00.032Z,1520535900.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:00.415Z,1520535900.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:00.435Z,1520535900.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:00.803Z,1520535900.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:00.836Z,1520535900.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:01.207Z,1520535901.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:01.237Z,1520535901.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:01.582Z,1520535901.582 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T19:05:01.582Z,1520535901.582 [NAL9602] Data Fault, FailCount= 3
2018-03-08T19:05:01.582Z,1520535901.582 [NAL9602](ERROR): Data Fault
2018-03-08T19:05:01.599Z,1520535901.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:01.639Z,1520535901.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:01.660Z,1520535901.660 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T19:05:01.986Z,1520535901.986 [NAL9602](INFO): Powering down
2018-03-08T19:05:02.003Z,1520535902.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:02.042Z,1520535902.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:02.406Z,1520535902.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:02.441Z,1520535902.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:02.806Z,1520535902.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:02.853Z,1520535902.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:02.897Z,1520535902.897 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T19:05:02.897Z,1520535902.897 [NAL9602] No Fault, FailCount= 3
2018-03-08T19:05:03.219Z,1520535903.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:03.257Z,1520535903.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:03.606Z,1520535903.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:03.621Z,1520535903.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:04.009Z,1520535904.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:04.025Z,1520535904.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:04.407Z,1520535904.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:04.422Z,1520535904.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:04.805Z,1520535904.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:04.820Z,1520535904.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:05.205Z,1520535905.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:05.221Z,1520535905.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:05.608Z,1520535905.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:05.623Z,1520535905.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:06.007Z,1520535906.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:06.022Z,1520535906.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:06.411Z,1520535906.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:06.426Z,1520535906.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:06.810Z,1520535906.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:06.826Z,1520535906.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:07.207Z,1520535907.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:07.222Z,1520535907.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:07.611Z,1520535907.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:07.626Z,1520535907.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:08.012Z,1520535908.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:08.027Z,1520535908.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:08.410Z,1520535908.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:08.425Z,1520535908.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:08.811Z,1520535908.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:08.826Z,1520535908.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:09.222Z,1520535909.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:09.237Z,1520535909.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:09.607Z,1520535909.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:09.621Z,1520535909.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:10.011Z,1520535910.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:10.027Z,1520535910.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:10.411Z,1520535910.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:10.426Z,1520535910.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:10.804Z,1520535910.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:10.819Z,1520535910.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:11.205Z,1520535911.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:11.221Z,1520535911.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:11.609Z,1520535911.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:11.631Z,1520535911.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:12.003Z,1520535912.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:12.018Z,1520535912.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:12.406Z,1520535912.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:12.421Z,1520535912.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:12.809Z,1520535912.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:12.832Z,1520535912.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:13.205Z,1520535913.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:13.220Z,1520535913.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:13.613Z,1520535913.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:13.628Z,1520535913.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:14.012Z,1520535914.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:14.027Z,1520535914.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:14.412Z,1520535914.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:14.427Z,1520535914.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:14.813Z,1520535914.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:14.829Z,1520535914.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:15.211Z,1520535915.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:15.230Z,1520535915.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:15.602Z,1520535915.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:15.629Z,1520535915.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:16.006Z,1520535916.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:16.032Z,1520535916.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:16.402Z,1520535916.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:16.422Z,1520535916.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:16.798Z,1520535916.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:16.822Z,1520535916.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:17.206Z,1520535917.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:17.238Z,1520535917.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:17.603Z,1520535917.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:17.638Z,1520535917.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:17.995Z,1520535917.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:18.010Z,1520535918.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:18.402Z,1520535918.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:18.429Z,1520535918.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:18.806Z,1520535918.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:18.844Z,1520535918.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:19.195Z,1520535919.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:19.210Z,1520535919.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:19.602Z,1520535919.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:19.617Z,1520535919.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:20.010Z,1520535920.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:20.046Z,1520535920.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:20.403Z,1520535920.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:20.418Z,1520535920.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:20.806Z,1520535920.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:20.822Z,1520535920.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:21.218Z,1520535921.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:21.254Z,1520535921.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:21.606Z,1520535921.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:21.622Z,1520535921.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:22.011Z,1520535922.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:22.027Z,1520535922.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:22.404Z,1520535922.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:22.434Z,1520535922.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:22.803Z,1520535922.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:22.832Z,1520535922.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:23.214Z,1520535923.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:23.236Z,1520535923.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:23.616Z,1520535923.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:23.630Z,1520535923.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:23.999Z,1520535923.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:24.025Z,1520535924.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:24.415Z,1520535924.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:24.435Z,1520535924.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:24.801Z,1520535924.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:24.828Z,1520535924.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:25.199Z,1520535925.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:25.234Z,1520535925.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:25.614Z,1520535925.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:25.629Z,1520535925.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:26.001Z,1520535926.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:26.034Z,1520535926.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:26.413Z,1520535926.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:26.429Z,1520535926.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:26.813Z,1520535926.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:26.829Z,1520535926.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:27.218Z,1520535927.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:27.234Z,1520535927.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:27.598Z,1520535927.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:27.632Z,1520535927.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:28.014Z,1520535928.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:28.035Z,1520535928.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:28.402Z,1520535928.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:28.434Z,1520535928.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:28.795Z,1520535928.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:28.830Z,1520535928.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:29.204Z,1520535929.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:29.230Z,1520535929.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:29.603Z,1520535929.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:29.639Z,1520535929.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:30.006Z,1520535930.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:30.032Z,1520535930.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:30.406Z,1520535930.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:30.432Z,1520535930.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:30.802Z,1520535930.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:30.828Z,1520535930.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:33.886Z,1520535933.886 [NAL9602](INFO): Powering up NAL9602
2018-03-08T19:05:33.904Z,1520535933.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:33.931Z,1520535933.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:34.024Z,1520535934.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:34.058Z,1520535934.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:34.414Z,1520535934.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:34.446Z,1520535934.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:34.787Z,1520535934.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:34.802Z,1520535934.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:35.189Z,1520535935.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:35.205Z,1520535935.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:35.589Z,1520535935.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:35.625Z,1520535935.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:35.988Z,1520535935.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:36.003Z,1520535936.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:36.381Z,1520535936.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:36.453Z,1520535936.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:36.782Z,1520535936.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:36.827Z,1520535936.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:37.186Z,1520535937.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:37.225Z,1520535937.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:37.579Z,1520535937.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:37.595Z,1520535937.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:37.979Z,1520535937.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:37.999Z,1520535937.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:38.390Z,1520535938.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:38.406Z,1520535938.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:38.792Z,1520535938.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:38.808Z,1520535938.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:39.184Z,1520535939.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:39.203Z,1520535939.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:39.587Z,1520535939.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:39.603Z,1520535939.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:39.982Z,1520535939.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:39.998Z,1520535939.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:40.385Z,1520535940.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:40.407Z,1520535940.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:40.785Z,1520535940.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:40.800Z,1520535940.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:41.179Z,1520535941.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:41.195Z,1520535941.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:41.590Z,1520535941.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:41.610Z,1520535941.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:41.983Z,1520535941.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:41.998Z,1520535941.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:42.383Z,1520535942.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:42.399Z,1520535942.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:42.784Z,1520535942.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:42.811Z,1520535942.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:43.188Z,1520535943.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:43.204Z,1520535943.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:43.589Z,1520535943.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:43.605Z,1520535943.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:43.986Z,1520535943.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:44.001Z,1520535944.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:44.391Z,1520535944.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:44.407Z,1520535944.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:44.766Z,1520535944.766 [NAL9602](INFO): NAL9602 initialized
2018-03-08T19:05:44.794Z,1520535944.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:44.810Z,1520535944.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:45.186Z,1520535945.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:45.201Z,1520535945.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:45.593Z,1520535945.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:45.609Z,1520535945.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:45.991Z,1520535945.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:46.014Z,1520535946.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:46.393Z,1520535946.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:46.409Z,1520535946.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:46.790Z,1520535946.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:46.805Z,1520535946.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:47.184Z,1520535947.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:47.200Z,1520535947.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:47.586Z,1520535947.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:47.601Z,1520535947.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:47.993Z,1520535947.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:48.008Z,1520535948.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:48.393Z,1520535948.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:48.408Z,1520535948.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:48.805Z,1520535948.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:48.836Z,1520535948.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:49.212Z,1520535949.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:49.240Z,1520535949.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:49.572Z,1520535949.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:49.606Z,1520535949.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:49.991Z,1520535949.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:50.006Z,1520535950.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:50.391Z,1520535950.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:50.407Z,1520535950.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:50.796Z,1520535950.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:50.812Z,1520535950.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:51.197Z,1520535951.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:51.212Z,1520535951.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:51.596Z,1520535951.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:51.611Z,1520535951.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:51.990Z,1520535951.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:52.010Z,1520535952.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:52.386Z,1520535952.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:52.401Z,1520535952.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:52.786Z,1520535952.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:52.801Z,1520535952.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:53.185Z,1520535953.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:53.201Z,1520535953.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:53.586Z,1520535953.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:53.601Z,1520535953.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:53.996Z,1520535953.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:54.011Z,1520535954.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:54.395Z,1520535954.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:54.411Z,1520535954.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:54.794Z,1520535954.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:54.814Z,1520535954.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:55.195Z,1520535955.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:55.210Z,1520535955.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:55.590Z,1520535955.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:55.610Z,1520535955.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:55.991Z,1520535955.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:56.007Z,1520535956.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:56.380Z,1520535956.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:56.395Z,1520535956.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:56.793Z,1520535956.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:56.816Z,1520535956.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:57.202Z,1520535957.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:57.217Z,1520535957.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:57.598Z,1520535957.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:57.613Z,1520535957.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:57.977Z,1520535957.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:58.000Z,1520535958.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:58.378Z,1520535958.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:58.414Z,1520535958.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:58.779Z,1520535958.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:58.814Z,1520535958.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:59.178Z,1520535959.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:59.219Z,1520535959.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:59.593Z,1520535959.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:05:59.619Z,1520535959.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:05:59.993Z,1520535959.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:00.021Z,1520535960.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:00.393Z,1520535960.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:00.419Z,1520535960.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:00.786Z,1520535960.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:00.822Z,1520535960.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:01.183Z,1520535961.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:01.287Z,1520535961.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:01.580Z,1520535961.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:01.595Z,1520535961.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:01.987Z,1520535961.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:02.003Z,1520535962.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:02.386Z,1520535962.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:02.401Z,1520535962.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:02.793Z,1520535962.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:02.825Z,1520535962.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:03.201Z,1520535963.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:03.231Z,1520535963.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:03.593Z,1520535963.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:03.632Z,1520535963.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:03.975Z,1520535963.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:03.998Z,1520535963.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:04.387Z,1520535964.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:04.402Z,1520535964.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:04.788Z,1520535964.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:04.803Z,1520535964.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:05.183Z,1520535965.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:05.198Z,1520535965.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:05.589Z,1520535965.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:05.605Z,1520535965.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:05.993Z,1520535965.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:06.008Z,1520535966.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:06.401Z,1520535966.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:06.431Z,1520535966.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:06.785Z,1520535966.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:06.805Z,1520535966.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:07.187Z,1520535967.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:07.201Z,1520535967.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:07.584Z,1520535967.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:07.604Z,1520535967.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:07.990Z,1520535967.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:08.010Z,1520535968.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:08.386Z,1520535968.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:08.401Z,1520535968.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:08.789Z,1520535968.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:08.817Z,1520535968.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:09.195Z,1520535969.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:09.214Z,1520535969.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:09.596Z,1520535969.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:09.611Z,1520535969.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:09.984Z,1520535969.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:10.006Z,1520535970.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:10.386Z,1520535970.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:10.406Z,1520535970.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:10.787Z,1520535970.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:10.803Z,1520535970.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:11.183Z,1520535971.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:11.202Z,1520535971.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:11.594Z,1520535971.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:11.623Z,1520535971.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:11.000Z,1520535972.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:12.015Z,1520535972.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:12.399Z,1520535972.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:12.414Z,1520535972.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:12.781Z,1520535972.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:12.803Z,1520535972.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:13.188Z,1520535973.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:13.210Z,1520535973.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:13.592Z,1520535973.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:13.609Z,1520535973.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:13.994Z,1520535973.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:14.014Z,1520535974.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:14.401Z,1520535974.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:14.416Z,1520535974.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:14.789Z,1520535974.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:14.813Z,1520535974.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:15.201Z,1520535975.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:15.222Z,1520535975.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:15.591Z,1520535975.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:15.606Z,1520535975.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:15.992Z,1520535975.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:16.007Z,1520535976.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:16.383Z,1520535976.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:16.407Z,1520535976.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:16.798Z,1520535976.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:16.813Z,1520535976.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:17.196Z,1520535977.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:17.215Z,1520535977.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:17.597Z,1520535977.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:17.618Z,1520535977.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:17.991Z,1520535977.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:18.006Z,1520535978.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:18.376Z,1520535978.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:18.407Z,1520535978.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:18.795Z,1520535978.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:18.811Z,1520535978.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:19.196Z,1520535979.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:19.212Z,1520535979.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:19.597Z,1520535979.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:19.612Z,1520535979.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:19.000Z,1520535980.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:20.015Z,1520535980.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:20.400Z,1520535980.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:20.415Z,1520535980.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:20.776Z,1520535980.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:20.807Z,1520535980.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:21.192Z,1520535981.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:21.207Z,1520535981.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:21.578Z,1520535981.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:21.606Z,1520535981.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:21.991Z,1520535981.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:22.007Z,1520535982.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:22.377Z,1520535982.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:22.403Z,1520535982.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:22.797Z,1520535982.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:22.813Z,1520535982.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:23.194Z,1520535983.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:23.222Z,1520535983.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:23.601Z,1520535983.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:23.617Z,1520535983.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:23.979Z,1520535983.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:24.006Z,1520535984.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:24.376Z,1520535984.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:24.399Z,1520535984.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:24.779Z,1520535984.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:24.814Z,1520535984.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:25.182Z,1520535985.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:25.209Z,1520535985.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:25.601Z,1520535985.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:25.617Z,1520535985.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:25.997Z,1520535985.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:26.019Z,1520535986.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:26.398Z,1520535986.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:26.418Z,1520535986.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:26.776Z,1520535986.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:26.800Z,1520535986.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:27.182Z,1520535987.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:27.214Z,1520535987.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:27.574Z,1520535987.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:27.589Z,1520535987.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:27.983Z,1520535987.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:28.015Z,1520535988.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:28.382Z,1520535988.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:28.419Z,1520535988.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:28.793Z,1520535988.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:28.827Z,1520535988.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:29.189Z,1520535989.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:29.204Z,1520535989.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:29.597Z,1520535989.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:29.632Z,1520535989.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:29.636Z,1520535989.636 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T19:01:29.5Z
2018-03-08T19:06:29.636Z,1520535989.636 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T19:06:29.636Z,1520535989.636 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T19:06:29.987Z,1520535989.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:30.002Z,1520535990.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:30.468Z,1520535990.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:30.490Z,1520535990.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:30.784Z,1520535990.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:30.815Z,1520535990.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:34.030Z,1520535994.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:34.046Z,1520535994.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:34.154Z,1520535994.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:34.198Z,1520535994.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:34.484Z,1520535994.484 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20180308T074127/Courier0264.lzma
2018-03-08T19:06:34.517Z,1520535994.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:34.547Z,1520535994.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:34.917Z,1520535994.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:34.947Z,1520535994.947 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:34.947Z,1520535994.947 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 227
2018-03-08T19:06:34.947Z,1520535994.947 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T19:06:34.949Z,1520535994.949 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:34.949Z,1520535994.949 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 227
2018-03-08T19:06:34.949Z,1520535994.949 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T19:06:34.950Z,1520535994.950 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:34.950Z,1520535994.950 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 227
2018-03-08T19:06:34.951Z,1520535994.951 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T19:06:34.962Z,1520535994.962 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T19:06:34.962Z,1520535994.962 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T19:06:34.962Z,1520535994.962 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T19:06:35.275Z,1520535995.275 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0264.lzma.bak
2018-03-08T19:06:35.275Z,1520535995.275 [DataOverHttps](INFO): SBD MOMSN=7988319
2018-03-08T19:06:35.314Z,1520535995.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:35.353Z,1520535995.353 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T19:06:35.353Z,1520535995.353 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 227
2018-03-08T19:06:35.353Z,1520535995.353 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T19:06:35.353Z,1520535995.353 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 227
2018-03-08T19:06:35.354Z,1520535995.354 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T19:06:35.354Z,1520535995.354 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 227
2018-03-08T19:06:35.914Z,1520535995.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:35.928Z,1520535995.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T19:06:35.945Z,1520535995.945 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:06:35.945Z,1520535995.945 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:06:35.946Z,1520535995.946 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T19:06:35.946Z,1520535995.946 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:06:35.946Z,1520535995.946 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:06:35.947Z,1520535995.947 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T19:06:35.947Z,1520535995.947 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:06:35.947Z,1520535995.947 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:06:36.102Z,1520535996.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:36.148Z,1520535996.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T19:06:36.149Z,1520535996.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:36.505Z,1520535996.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:36.520Z,1520535996.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T19:06:36.521Z,1520535996.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:39.673Z,1520535999.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:39.696Z,1520535999.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T19:06:39.697Z,1520535999.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:39.809Z,1520535999.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:39.847Z,1520535999.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-08T19:06:39.848Z,1520535999.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:40.165Z,1520536000.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:40.214Z,1520536000.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-08T19:06:40.215Z,1520536000.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:40.554Z,1520536000.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:40.574Z,1520536000.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T19:06:40.575Z,1520536000.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:40.953Z,1520536000.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:40.968Z,1520536000.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T19:06:40.969Z,1520536000.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:41.351Z,1520536001.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:41.374Z,1520536001.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T19:06:41.375Z,1520536001.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:41.757Z,1520536001.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:41.772Z,1520536001.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T19:06:41.773Z,1520536001.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:44.861Z,1520536004.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:44.876Z,1520536004.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-03-08T19:06:44.877Z,1520536004.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:44.999Z,1520536004.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:45.030Z,1520536005.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T19:06:45.031Z,1520536005.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:45.325Z,1520536005.325 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0265.lzma
2018-03-08T19:06:45.361Z,1520536005.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:45.375Z,1520536005.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T19:06:45.376Z,1520536005.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:45.751Z,1520536005.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:45.771Z,1520536005.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T19:06:45.772Z,1520536005.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:46.119Z,1520536006.119 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0265.lzma.bak
2018-03-08T19:06:46.119Z,1520536006.119 [DataOverHttps](INFO): SBD MOMSN=7988323
2018-03-08T19:06:46.163Z,1520536006.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:46.180Z,1520536006.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T19:06:46.181Z,1520536006.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:46.752Z,1520536006.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:46.767Z,1520536006.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2018-03-08T19:06:46.768Z,1520536006.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:46.771Z,1520536006.771 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T19:06:46.771Z,1520536006.771 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T19:06:46.771Z,1520536006.771 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T19:06:46.965Z,1520536006.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:47.003Z,1520536007.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T19:06:47.004Z,1520536007.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:50.065Z,1520536010.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:50.080Z,1520536010.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2018-03-08T19:06:50.081Z,1520536010.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:50.174Z,1520536010.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:50.210Z,1520536010.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-08T19:06:50.211Z,1520536010.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:50.570Z,1520536010.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:50.606Z,1520536010.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T19:06:50.607Z,1520536010.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:50.969Z,1520536010.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:50.983Z,1520536010.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T19:06:50.984Z,1520536010.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:51.369Z,1520536011.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:51.385Z,1520536011.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T19:06:51.386Z,1520536011.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:51.781Z,1520536011.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:51.811Z,1520536011.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T19:06:51.812Z,1520536011.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:52.173Z,1520536012.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:52.188Z,1520536012.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T19:06:52.189Z,1520536012.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:52.569Z,1520536012.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:52.584Z,1520536012.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T19:06:52.585Z,1520536012.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:52.964Z,1520536012.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:52.988Z,1520536012.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T19:06:52.993Z,1520536012.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:53.373Z,1520536013.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:53.388Z,1520536013.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T19:06:53.389Z,1520536013.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:53.773Z,1520536013.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:53.788Z,1520536013.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T19:06:53.789Z,1520536013.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:54.172Z,1520536014.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:54.194Z,1520536014.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T19:06:54.195Z,1520536014.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:54.571Z,1520536014.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:54.594Z,1520536014.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T19:06:54.595Z,1520536014.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:54.960Z,1520536014.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:54.983Z,1520536014.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:55.371Z,1520536015.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:55.390Z,1520536015.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:55.782Z,1520536015.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:55.797Z,1520536015.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:56.178Z,1520536016.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:56.193Z,1520536016.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:56.573Z,1520536016.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:56.598Z,1520536016.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:56.962Z,1520536016.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:56.990Z,1520536016.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:57.356Z,1520536017.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:57.391Z,1520536017.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:57.759Z,1520536017.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:57.786Z,1520536017.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:58.175Z,1520536018.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:58.190Z,1520536018.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:58.573Z,1520536018.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:58.596Z,1520536018.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:58.977Z,1520536018.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:59.005Z,1520536019.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:59.382Z,1520536019.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:59.402Z,1520536019.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:06:59.756Z,1520536019.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:06:59.772Z,1520536019.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:00.162Z,1520536020.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:00.199Z,1520536020.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:00.558Z,1520536020.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:00.603Z,1520536020.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:00.954Z,1520536020.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:00.969Z,1520536020.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:01.358Z,1520536021.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:01.378Z,1520536021.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:01.772Z,1520536021.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:01.808Z,1520536021.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:02.169Z,1520536022.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:02.201Z,1520536022.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:02.573Z,1520536022.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:02.609Z,1520536022.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:02.964Z,1520536022.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:02.979Z,1520536022.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:03.364Z,1520536023.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:03.379Z,1520536023.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:03.766Z,1520536023.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:03.781Z,1520536023.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:04.168Z,1520536024.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:04.215Z,1520536024.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:04.577Z,1520536024.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:04.609Z,1520536024.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:04.973Z,1520536024.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:04.988Z,1520536024.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:05.381Z,1520536025.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:05.416Z,1520536025.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:05.759Z,1520536025.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:05.780Z,1520536025.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:06.164Z,1520536026.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:06.188Z,1520536026.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:06.571Z,1520536026.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:06.586Z,1520536026.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:06.960Z,1520536026.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:06.987Z,1520536026.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:07.367Z,1520536027.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:07.383Z,1520536027.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:07.777Z,1520536027.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:07.792Z,1520536027.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:08.178Z,1520536028.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:08.193Z,1520536028.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:08.576Z,1520536028.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:08.591Z,1520536028.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:08.969Z,1520536028.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:08.983Z,1520536028.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:09.357Z,1520536029.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:09.389Z,1520536029.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:09.767Z,1520536029.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:09.786Z,1520536029.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:10.173Z,1520536030.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:10.200Z,1520536030.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:10.578Z,1520536030.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:10.599Z,1520536030.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:10.978Z,1520536030.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:10.998Z,1520536030.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:11.373Z,1520536031.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:11.388Z,1520536031.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:11.813Z,1520536031.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:11.847Z,1520536031.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:12.160Z,1520536032.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:12.194Z,1520536032.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:12.560Z,1520536032.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:12.575Z,1520536032.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:12.957Z,1520536032.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:12.972Z,1520536032.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:13.360Z,1520536033.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:13.375Z,1520536033.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:13.781Z,1520536033.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:13.797Z,1520536033.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:14.165Z,1520536034.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:14.181Z,1520536034.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:14.622Z,1520536034.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:14.643Z,1520536034.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:14.961Z,1520536034.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:14.976Z,1520536034.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:15.353Z,1520536035.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:15.369Z,1520536035.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:15.760Z,1520536035.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:15.784Z,1520536035.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:16.159Z,1520536036.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:16.174Z,1520536036.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:16.570Z,1520536036.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:16.601Z,1520536036.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:16.982Z,1520536036.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:17.007Z,1520536037.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:17.378Z,1520536037.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:17.410Z,1520536037.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:17.760Z,1520536037.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:17.776Z,1520536037.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:18.162Z,1520536038.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:18.183Z,1520536038.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:18.567Z,1520536038.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:18.582Z,1520536038.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:18.962Z,1520536038.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:18.977Z,1520536038.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:19.373Z,1520536039.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:19.389Z,1520536039.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:19.781Z,1520536039.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:19.819Z,1520536039.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:20.168Z,1520536040.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:20.183Z,1520536040.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:20.564Z,1520536040.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:20.587Z,1520536040.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:20.968Z,1520536040.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:20.983Z,1520536040.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:21.366Z,1520536041.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:21.386Z,1520536041.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:21.782Z,1520536041.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:21.820Z,1520536041.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:22.181Z,1520536042.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:22.215Z,1520536042.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:22.581Z,1520536042.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:22.617Z,1520536042.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:22.968Z,1520536042.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:22.983Z,1520536042.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:23.367Z,1520536043.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:23.382Z,1520536043.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:23.769Z,1520536043.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:23.786Z,1520536043.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:24.168Z,1520536044.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:24.183Z,1520536044.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:24.573Z,1520536044.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:24.588Z,1520536044.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:24.970Z,1520536044.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:24.985Z,1520536044.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:25.381Z,1520536045.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:25.414Z,1520536045.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:25.767Z,1520536045.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:25.782Z,1520536045.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:26.164Z,1520536046.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:26.188Z,1520536046.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:26.571Z,1520536046.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:26.590Z,1520536046.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:26.971Z,1520536046.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:26.986Z,1520536046.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:27.372Z,1520536047.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:27.388Z,1520536047.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:27.777Z,1520536047.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:27.793Z,1520536047.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:28.177Z,1520536048.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:28.198Z,1520536048.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:28.572Z,1520536048.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:28.588Z,1520536048.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:28.966Z,1520536048.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:28.981Z,1520536048.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:29.377Z,1520536049.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:29.392Z,1520536049.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:29.776Z,1520536049.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:29.792Z,1520536049.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:30.177Z,1520536050.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:30.198Z,1520536050.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:30.571Z,1520536050.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:30.594Z,1520536050.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:30.954Z,1520536050.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:30.985Z,1520536050.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:31.371Z,1520536051.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:31.387Z,1520536051.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:31.775Z,1520536051.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:31.796Z,1520536051.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:32.172Z,1520536052.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:32.195Z,1520536052.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:32.581Z,1520536052.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:32.596Z,1520536052.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:32.972Z,1520536052.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:32.988Z,1520536052.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:33.356Z,1520536053.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:33.393Z,1520536053.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:33.764Z,1520536053.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:33.790Z,1520536053.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:34.159Z,1520536054.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:34.188Z,1520536054.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:34.582Z,1520536054.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:34.597Z,1520536054.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:34.980Z,1520536054.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:35.002Z,1520536055.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:35.382Z,1520536055.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:35.403Z,1520536055.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:35.756Z,1520536055.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:35.791Z,1520536055.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:36.159Z,1520536056.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:36.194Z,1520536056.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:36.559Z,1520536056.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:36.587Z,1520536056.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:36.957Z,1520536056.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:36.989Z,1520536056.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:37.362Z,1520536057.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:37.389Z,1520536057.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:37.777Z,1520536057.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:37.798Z,1520536057.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:38.178Z,1520536058.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:38.197Z,1520536058.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:38.589Z,1520536058.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:38.608Z,1520536058.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:38.962Z,1520536058.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:38.998Z,1520536058.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:39.354Z,1520536059.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:39.391Z,1520536059.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:39.758Z,1520536059.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:39.794Z,1520536059.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:40.158Z,1520536060.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:40.191Z,1520536060.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:40.582Z,1520536060.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:40.597Z,1520536060.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:40.981Z,1520536060.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:40.000Z,1520536061.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:41.369Z,1520536061.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:41.402Z,1520536061.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:41.758Z,1520536061.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:41.795Z,1520536061.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:42.158Z,1520536062.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:42.195Z,1520536062.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:42.559Z,1520536062.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:42.596Z,1520536062.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:42.955Z,1520536062.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:42.991Z,1520536062.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:43.356Z,1520536063.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:43.371Z,1520536063.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:43.773Z,1520536063.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:43.802Z,1520536063.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:44.173Z,1520536064.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:44.211Z,1520536064.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:44.577Z,1520536064.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:44.601Z,1520536064.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:44.964Z,1520536064.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:45.006Z,1520536065.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:45.364Z,1520536065.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:45.380Z,1520536065.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:45.771Z,1520536065.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:45.787Z,1520536065.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:46.164Z,1520536066.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:46.180Z,1520536066.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:46.577Z,1520536066.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:46.609Z,1520536066.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:46.973Z,1520536066.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:46.988Z,1520536066.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:47.369Z,1520536067.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:47.385Z,1520536067.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:50.474Z,1520536070.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:50.491Z,1520536070.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:50.605Z,1520536070.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:50.639Z,1520536070.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:50.990Z,1520536070.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:51.034Z,1520536071.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:51.385Z,1520536071.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:51.414Z,1520536071.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:51.785Z,1520536071.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:51.818Z,1520536071.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:52.178Z,1520536072.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:52.226Z,1520536072.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:52.576Z,1520536072.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:52.591Z,1520536072.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:52.975Z,1520536072.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:52.991Z,1520536072.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:53.376Z,1520536073.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:53.391Z,1520536073.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:53.782Z,1520536073.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:53.823Z,1520536073.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:54.190Z,1520536074.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:54.222Z,1520536074.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:54.590Z,1520536074.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:54.627Z,1520536074.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:54.972Z,1520536074.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:54.996Z,1520536074.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:55.377Z,1520536075.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:55.393Z,1520536075.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:55.776Z,1520536075.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:55.792Z,1520536075.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:56.165Z,1520536076.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:56.199Z,1520536076.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:56.581Z,1520536076.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:56.598Z,1520536076.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:56.985Z,1520536076.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:56.000Z,1520536077.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:57.382Z,1520536077.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:57.397Z,1520536077.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:57.772Z,1520536077.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:57.799Z,1520536077.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:58.181Z,1520536078.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:58.196Z,1520536078.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:58.578Z,1520536078.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:58.594Z,1520536078.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:58.966Z,1520536078.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:59.002Z,1520536079.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:59.379Z,1520536079.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:59.395Z,1520536079.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:07:59.789Z,1520536079.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:07:59.804Z,1520536079.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:00.190Z,1520536080.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:00.210Z,1520536080.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:00.590Z,1520536080.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:00.605Z,1520536080.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:00.978Z,1520536080.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:00.998Z,1520536080.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:01.366Z,1520536081.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:01.403Z,1520536081.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:01.781Z,1520536081.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:01.796Z,1520536081.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:02.180Z,1520536082.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:02.196Z,1520536082.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:02.585Z,1520536082.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:02.601Z,1520536082.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:02.992Z,1520536082.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:03.007Z,1520536083.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:03.389Z,1520536083.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:03.404Z,1520536083.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:03.768Z,1520536083.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:03.795Z,1520536083.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:04.166Z,1520536084.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:04.203Z,1520536084.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:04.586Z,1520536084.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:04.601Z,1520536084.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:04.992Z,1520536084.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:05.007Z,1520536085.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:05.390Z,1520536085.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:05.405Z,1520536085.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:05.779Z,1520536085.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:05.799Z,1520536085.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:06.166Z,1520536086.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:06.199Z,1520536086.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:06.580Z,1520536086.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:06.602Z,1520536086.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:06.982Z,1520536086.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:06.997Z,1520536086.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:07.366Z,1520536087.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:07.399Z,1520536087.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:07.790Z,1520536087.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:07.805Z,1520536087.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:08.192Z,1520536088.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:08.207Z,1520536088.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:08.589Z,1520536088.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:08.604Z,1520536088.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:08.962Z,1520536088.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:08.991Z,1520536088.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:09.377Z,1520536089.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:09.399Z,1520536089.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:09.768Z,1520536089.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:09.799Z,1520536089.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:10.180Z,1520536090.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:10.234Z,1520536090.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:10.613Z,1520536090.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:10.636Z,1520536090.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:10.992Z,1520536090.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:11.015Z,1520536091.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:11.389Z,1520536091.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:11.404Z,1520536091.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:11.767Z,1520536091.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:11.803Z,1520536091.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:12.170Z,1520536092.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:12.198Z,1520536092.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:12.566Z,1520536092.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:12.600Z,1520536092.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:12.970Z,1520536092.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:12.997Z,1520536092.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:13.366Z,1520536093.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:13.392Z,1520536093.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:13.790Z,1520536093.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:13.807Z,1520536093.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:14.193Z,1520536094.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:14.209Z,1520536094.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:14.590Z,1520536094.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:14.605Z,1520536094.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:14.970Z,1520536094.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:14.998Z,1520536094.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:15.366Z,1520536095.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:15.392Z,1520536095.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:15.766Z,1520536095.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:15.793Z,1520536095.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:16.166Z,1520536096.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:16.200Z,1520536096.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:16.590Z,1520536096.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:16.606Z,1520536096.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:16.989Z,1520536096.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:17.005Z,1520536097.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:17.384Z,1520536097.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:17.399Z,1520536097.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:17.770Z,1520536097.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:17.797Z,1520536097.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:18.166Z,1520536098.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:18.193Z,1520536098.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:18.566Z,1520536098.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:18.598Z,1520536098.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:18.970Z,1520536098.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:18.997Z,1520536098.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:19.365Z,1520536099.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:19.391Z,1520536099.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:19.786Z,1520536099.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:19.801Z,1520536099.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:20.190Z,1520536100.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:20.205Z,1520536100.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:20.594Z,1520536100.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:20.609Z,1520536100.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:20.966Z,1520536100.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:21.002Z,1520536101.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:21.368Z,1520536101.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:21.399Z,1520536101.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:21.776Z,1520536101.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:21.961Z,1520536101.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:22.170Z,1520536102.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:22.211Z,1520536102.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:22.589Z,1520536102.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:22.605Z,1520536102.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:22.988Z,1520536102.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:23.003Z,1520536103.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:23.387Z,1520536103.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:23.402Z,1520536103.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:23.771Z,1520536103.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:23.851Z,1520536103.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:24.168Z,1520536104.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:24.199Z,1520536104.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:24.566Z,1520536104.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:24.602Z,1520536104.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:24.967Z,1520536104.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:25.003Z,1520536105.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:25.367Z,1520536105.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:25.395Z,1520536105.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:25.778Z,1520536105.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:25.807Z,1520536105.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:26.178Z,1520536106.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:26.212Z,1520536106.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:26.605Z,1520536106.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:26.620Z,1520536106.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:26.966Z,1520536106.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:27.002Z,1520536107.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:27.364Z,1520536107.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:27.380Z,1520536107.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:27.775Z,1520536107.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:27.811Z,1520536107.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:28.176Z,1520536108.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:28.192Z,1520536108.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:28.585Z,1520536108.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:28.615Z,1520536108.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:28.985Z,1520536108.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:29.019Z,1520536109.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:29.381Z,1520536109.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:29.396Z,1520536109.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:29.770Z,1520536109.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:29.790Z,1520536109.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:30.179Z,1520536110.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:30.219Z,1520536110.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:30.577Z,1520536110.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:30.592Z,1520536110.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:30.975Z,1520536110.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:30.991Z,1520536110.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:31.373Z,1520536111.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:31.394Z,1520536111.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:31.789Z,1520536111.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:31.804Z,1520536111.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:32.176Z,1520536112.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:32.192Z,1520536112.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:32.578Z,1520536112.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:32.593Z,1520536112.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:32.976Z,1520536112.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:32.992Z,1520536112.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:33.374Z,1520536113.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:33.394Z,1520536113.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:33.777Z,1520536113.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:33.793Z,1520536113.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:34.175Z,1520536114.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:34.191Z,1520536114.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:34.581Z,1520536114.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:34.597Z,1520536114.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:34.982Z,1520536114.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:34.998Z,1520536114.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:35.381Z,1520536115.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:35.403Z,1520536115.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:35.763Z,1520536115.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:35.799Z,1520536115.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:36.178Z,1520536116.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:36.198Z,1520536116.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:36.575Z,1520536116.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:36.594Z,1520536116.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:36.973Z,1520536116.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:36.989Z,1520536116.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:37.368Z,1520536117.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:37.399Z,1520536117.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:37.793Z,1520536117.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:37.808Z,1520536117.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:38.185Z,1520536118.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:38.201Z,1520536118.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:38.581Z,1520536118.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:38.603Z,1520536118.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:38.966Z,1520536118.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:38.995Z,1520536118.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:39.366Z,1520536119.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:39.403Z,1520536119.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:39.772Z,1520536119.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:39.807Z,1520536119.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:40.166Z,1520536120.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:40.202Z,1520536120.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:40.581Z,1520536120.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:40.614Z,1520536120.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:40.981Z,1520536120.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:41.016Z,1520536121.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:41.381Z,1520536121.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:41.408Z,1520536121.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:41.760Z,1520536121.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:41.775Z,1520536121.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:42.174Z,1520536122.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:42.210Z,1520536122.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:42.569Z,1520536122.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:42.615Z,1520536122.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:42.965Z,1520536122.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:42.981Z,1520536122.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:43.372Z,1520536123.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:43.414Z,1520536123.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:43.781Z,1520536123.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:43.804Z,1520536123.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:44.181Z,1520536124.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:44.209Z,1520536124.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:44.589Z,1520536124.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:44.620Z,1520536124.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:44.975Z,1520536124.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:44.990Z,1520536124.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:45.370Z,1520536125.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:45.385Z,1520536125.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:45.777Z,1520536125.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:45.792Z,1520536125.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:46.175Z,1520536126.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:46.190Z,1520536126.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:46.577Z,1520536126.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:46.594Z,1520536126.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:46.989Z,1520536126.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:47.004Z,1520536127.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:47.381Z,1520536127.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:47.396Z,1520536127.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:50.477Z,1520536130.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:50.493Z,1520536130.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:50.592Z,1520536130.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:50.627Z,1520536130.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:50.963Z,1520536130.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:50.979Z,1520536130.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:51.363Z,1520536131.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:51.378Z,1520536131.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:51.753Z,1520536131.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:51.782Z,1520536131.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:52.147Z,1520536132.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:52.177Z,1520536132.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:52.544Z,1520536132.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:52.578Z,1520536132.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:52.942Z,1520536132.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:52.973Z,1520536132.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:53.341Z,1520536133.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:53.356Z,1520536133.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:53.757Z,1520536133.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:53.783Z,1520536133.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:54.162Z,1520536134.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:54.187Z,1520536134.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:54.557Z,1520536134.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:54.580Z,1520536134.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:54.944Z,1520536134.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:54.959Z,1520536134.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:55.341Z,1520536135.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:55.356Z,1520536135.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:55.748Z,1520536135.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:55.763Z,1520536135.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:56.146Z,1520536136.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:56.161Z,1520536136.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:56.561Z,1520536136.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:56.592Z,1520536136.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:56.957Z,1520536136.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:56.985Z,1520536136.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:57.349Z,1520536137.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:57.370Z,1520536137.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:57.749Z,1520536137.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:57.765Z,1520536137.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:58.146Z,1520536138.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:58.166Z,1520536138.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:58.548Z,1520536138.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:58.563Z,1520536138.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:58.951Z,1520536138.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:58.966Z,1520536138.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:59.353Z,1520536139.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:59.369Z,1520536139.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:08:59.755Z,1520536139.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:08:59.770Z,1520536139.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:00.146Z,1520536140.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:00.162Z,1520536140.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:00.552Z,1520536140.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:00.567Z,1520536140.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:00.951Z,1520536140.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:00.967Z,1520536140.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:01.335Z,1520536141.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:01.371Z,1520536141.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:01.758Z,1520536141.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:01.774Z,1520536141.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:02.158Z,1520536142.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:02.173Z,1520536142.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:02.557Z,1520536142.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:02.573Z,1520536142.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:02.952Z,1520536142.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:02.967Z,1520536142.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:03.348Z,1520536143.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:03.364Z,1520536143.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:03.754Z,1520536143.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:03.774Z,1520536143.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:04.154Z,1520536144.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:04.170Z,1520536144.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:04.543Z,1520536144.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:04.597Z,1520536144.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:04.954Z,1520536144.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:04.975Z,1520536144.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:05.357Z,1520536145.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:05.373Z,1520536145.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:05.758Z,1520536145.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:05.773Z,1520536145.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:06.141Z,1520536146.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:06.163Z,1520536146.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:06.545Z,1520536146.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:06.569Z,1520536146.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:06.943Z,1520536146.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:06.972Z,1520536146.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:07.337Z,1520536147.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:07.371Z,1520536147.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:07.753Z,1520536147.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:07.786Z,1520536147.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:08.161Z,1520536148.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:08.176Z,1520536148.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:08.565Z,1520536148.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:08.580Z,1520536148.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:08.938Z,1520536148.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:08.965Z,1520536148.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:09.339Z,1520536149.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:09.367Z,1520536149.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:09.743Z,1520536149.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:09.769Z,1520536149.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:10.139Z,1520536150.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:10.165Z,1520536150.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:10.538Z,1520536150.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:10.572Z,1520536150.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:10.952Z,1520536150.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:10.985Z,1520536150.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:11.365Z,1520536151.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:11.380Z,1520536151.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:11.758Z,1520536151.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:11.773Z,1520536151.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:12.137Z,1520536152.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:12.164Z,1520536152.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:12.543Z,1520536152.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:12.570Z,1520536152.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:12.940Z,1520536152.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:12.976Z,1520536152.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:13.333Z,1520536153.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:13.357Z,1520536153.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:13.750Z,1520536153.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:13.782Z,1520536153.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:14.166Z,1520536154.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:14.181Z,1520536154.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:14.561Z,1520536154.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:14.577Z,1520536154.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:14.947Z,1520536154.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:14.973Z,1520536154.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:15.340Z,1520536155.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:15.376Z,1520536155.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:15.744Z,1520536155.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:15.775Z,1520536155.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:16.138Z,1520536156.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:16.170Z,1520536156.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:16.549Z,1520536156.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:16.579Z,1520536156.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:16.950Z,1520536156.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:16.983Z,1520536156.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:17.350Z,1520536157.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:17.383Z,1520536157.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:17.739Z,1520536157.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:17.754Z,1520536157.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:18.141Z,1520536158.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:18.156Z,1520536158.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:18.547Z,1520536158.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:18.562Z,1520536158.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:18.952Z,1520536158.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:18.967Z,1520536158.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:19.337Z,1520536159.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:19.359Z,1520536159.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:19.757Z,1520536159.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:19.793Z,1520536159.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:20.161Z,1520536160.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:20.194Z,1520536160.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:20.561Z,1520536160.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:20.591Z,1520536160.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:20.944Z,1520536160.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:20.967Z,1520536160.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:21.348Z,1520536161.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:21.363Z,1520536161.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:21.745Z,1520536161.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:21.760Z,1520536161.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:22.149Z,1520536162.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:22.165Z,1520536162.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:22.548Z,1520536162.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:22.563Z,1520536162.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:22.948Z,1520536162.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:22.963Z,1520536162.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:23.361Z,1520536163.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:23.376Z,1520536163.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:23.754Z,1520536163.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:23.769Z,1520536163.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:24.143Z,1520536164.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:24.166Z,1520536164.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:24.551Z,1520536164.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:24.567Z,1520536164.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:24.954Z,1520536164.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:24.969Z,1520536164.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:25.343Z,1520536165.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:25.363Z,1520536165.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:25.753Z,1520536165.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:25.769Z,1520536165.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:26.153Z,1520536166.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:26.168Z,1520536166.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:26.553Z,1520536166.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:26.569Z,1520536166.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:26.947Z,1520536166.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:26.971Z,1520536166.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:27.351Z,1520536167.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:27.366Z,1520536167.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:27.751Z,1520536167.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:27.774Z,1520536167.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:28.152Z,1520536168.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:28.167Z,1520536168.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:28.552Z,1520536168.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:28.567Z,1520536168.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:28.953Z,1520536168.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:28.969Z,1520536168.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:29.375Z,1520536169.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:29.411Z,1520536169.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:29.757Z,1520536169.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:29.772Z,1520536169.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:30.147Z,1520536170.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:30.167Z,1520536170.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:30.551Z,1520536170.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:30.575Z,1520536170.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:30.951Z,1520536170.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:30.974Z,1520536170.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:31.341Z,1520536171.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:31.381Z,1520536171.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:31.752Z,1520536171.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:31.790Z,1520536171.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:32.172Z,1520536172.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:32.188Z,1520536172.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:32.553Z,1520536172.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:32.589Z,1520536172.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:32.948Z,1520536172.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:32.963Z,1520536172.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:33.348Z,1520536173.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:33.362Z,1520536173.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:33.745Z,1520536173.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:33.761Z,1520536173.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:34.142Z,1520536174.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:34.166Z,1520536174.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:34.553Z,1520536174.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:34.569Z,1520536174.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:34.950Z,1520536174.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:34.978Z,1520536174.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:35.356Z,1520536175.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:35.371Z,1520536175.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:35.752Z,1520536175.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:35.767Z,1520536175.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:36.145Z,1520536176.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:36.160Z,1520536176.160 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:36.160Z,1520536176.160 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 228
2018-03-08T19:09:36.160Z,1520536176.160 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T19:09:36.162Z,1520536176.162 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:36.162Z,1520536176.162 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 228
2018-03-08T19:09:36.162Z,1520536176.162 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T19:09:36.164Z,1520536176.164 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:36.164Z,1520536176.164 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 228
2018-03-08T19:09:36.164Z,1520536176.164 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T19:09:36.176Z,1520536176.176 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T19:09:36.176Z,1520536176.176 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T19:09:36.177Z,1520536176.177 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T19:09:36.539Z,1520536176.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:36.585Z,1520536176.585 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T19:09:36.585Z,1520536176.585 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 228
2018-03-08T19:09:36.585Z,1520536176.585 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T19:09:36.585Z,1520536176.585 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 228
2018-03-08T19:09:36.586Z,1520536176.586 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T19:09:36.586Z,1520536176.586 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 228
2018-03-08T19:09:36.940Z,1520536176.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:36.966Z,1520536176.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T19:09:36.966Z,1520536176.966 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:09:36.967Z,1520536176.967 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:09:36.967Z,1520536176.967 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T19:09:36.967Z,1520536176.967 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:09:36.968Z,1520536176.968 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:09:36.968Z,1520536176.968 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T19:09:36.968Z,1520536176.968 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:09:36.969Z,1520536176.969 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:09:37.339Z,1520536177.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:37.370Z,1520536177.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T19:09:37.371Z,1520536177.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:37.753Z,1520536177.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:37.776Z,1520536177.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T19:09:37.781Z,1520536177.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:38.165Z,1520536178.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:38.180Z,1520536178.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T19:09:38.181Z,1520536178.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:38.553Z,1520536178.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:38.582Z,1520536178.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T19:09:38.583Z,1520536178.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:38.941Z,1520536178.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:38.972Z,1520536178.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T19:09:38.977Z,1520536178.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:39.346Z,1520536179.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:39.376Z,1520536179.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T19:09:39.377Z,1520536179.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:39.747Z,1520536179.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:39.777Z,1520536179.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T19:09:39.778Z,1520536179.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:40.145Z,1520536180.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:40.175Z,1520536180.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T19:09:40.181Z,1520536180.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:40.543Z,1520536180.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:40.558Z,1520536180.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T19:09:40.559Z,1520536180.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:40.953Z,1520536180.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:40.984Z,1520536180.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T19:09:40.985Z,1520536180.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:41.361Z,1520536181.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:41.386Z,1520536181.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T19:09:41.387Z,1520536181.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:41.765Z,1520536181.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:41.791Z,1520536181.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T19:09:41.792Z,1520536181.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:42.139Z,1520536182.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:42.162Z,1520536182.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T19:09:42.163Z,1520536182.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:42.544Z,1520536182.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:42.569Z,1520536182.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T19:09:42.570Z,1520536182.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:42.948Z,1520536182.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:42.964Z,1520536182.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T19:09:42.965Z,1520536182.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:43.343Z,1520536183.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:43.365Z,1520536183.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T19:09:43.366Z,1520536183.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:43.750Z,1520536183.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:43.766Z,1520536183.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T19:09:43.767Z,1520536183.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:44.153Z,1520536184.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:44.169Z,1520536184.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T19:09:44.170Z,1520536184.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:44.553Z,1520536184.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:44.570Z,1520536184.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T19:09:44.570Z,1520536184.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:44.951Z,1520536184.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:44.966Z,1520536184.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T19:09:44.967Z,1520536184.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:45.351Z,1520536185.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:45.367Z,1520536185.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T19:09:45.368Z,1520536185.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:45.747Z,1520536185.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:45.762Z,1520536185.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T19:09:45.763Z,1520536185.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:46.144Z,1520536186.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:46.179Z,1520536186.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T19:09:46.180Z,1520536186.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:46.547Z,1520536186.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:46.562Z,1520536186.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T19:09:46.563Z,1520536186.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:46.953Z,1520536186.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:46.976Z,1520536186.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T19:09:46.981Z,1520536186.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:47.360Z,1520536187.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:47.375Z,1520536187.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T19:09:47.375Z,1520536187.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:47.760Z,1520536187.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:47.787Z,1520536187.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T19:09:47.788Z,1520536187.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:53.377Z,1520536193.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:53.406Z,1520536193.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T19:09:53.407Z,1520536193.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:53.501Z,1520536193.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:53.528Z,1520536193.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-03-08T19:09:53.533Z,1520536193.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:53.872Z,1520536193.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:53.887Z,1520536193.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T19:09:53.887Z,1520536193.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:54.274Z,1520536194.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:54.345Z,1520536194.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-03-08T19:09:54.346Z,1520536194.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:54.675Z,1520536194.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:54.690Z,1520536194.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-08T19:09:54.691Z,1520536194.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:55.054Z,1520536195.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:55.080Z,1520536195.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T19:09:55.081Z,1520536195.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:55.456Z,1520536195.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:55.497Z,1520536195.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T19:09:55.498Z,1520536195.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:55.859Z,1520536195.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:55.890Z,1520536195.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T19:09:55.890Z,1520536195.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:56.295Z,1520536196.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:56.312Z,1520536196.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:56.685Z,1520536196.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:56.700Z,1520536196.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:57.065Z,1520536197.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:57.092Z,1520536197.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:57.466Z,1520536197.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:57.498Z,1520536197.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:57.860Z,1520536197.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:57.891Z,1520536197.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:58.258Z,1520536198.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:58.290Z,1520536198.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:58.656Z,1520536198.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:58.687Z,1520536198.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:59.062Z,1520536199.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:59.096Z,1520536199.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:59.461Z,1520536199.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:59.493Z,1520536199.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:09:59.886Z,1520536199.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:09:59.901Z,1520536199.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:00.265Z,1520536200.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:00.300Z,1520536200.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:00.662Z,1520536200.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:00.693Z,1520536200.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:01.062Z,1520536201.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:01.078Z,1520536201.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:01.462Z,1520536201.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:01.477Z,1520536201.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:01.860Z,1520536201.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:01.875Z,1520536201.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:02.266Z,1520536202.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:02.281Z,1520536202.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:02.677Z,1520536202.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:02.708Z,1520536202.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:03.073Z,1520536203.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:03.088Z,1520536203.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:03.477Z,1520536203.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:03.492Z,1520536203.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:03.872Z,1520536203.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:03.887Z,1520536203.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:04.267Z,1520536204.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:04.287Z,1520536204.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:04.667Z,1520536204.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:04.687Z,1520536204.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:05.063Z,1520536205.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:05.078Z,1520536205.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:05.470Z,1520536205.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:05.491Z,1520536205.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:05.874Z,1520536205.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:05.889Z,1520536205.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:06.272Z,1520536206.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:06.287Z,1520536206.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:06.666Z,1520536206.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:06.686Z,1520536206.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:07.066Z,1520536207.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:07.081Z,1520536207.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:07.466Z,1520536207.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:07.481Z,1520536207.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:07.868Z,1520536207.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:07.884Z,1520536207.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:08.260Z,1520536208.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:08.283Z,1520536208.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:08.675Z,1520536208.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:08.690Z,1520536208.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:09.070Z,1520536209.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:09.090Z,1520536209.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:09.472Z,1520536209.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:09.491Z,1520536209.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:09.863Z,1520536209.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:09.878Z,1520536209.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:10.269Z,1520536210.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:10.284Z,1520536210.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:10.666Z,1520536210.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:10.686Z,1520536210.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:11.062Z,1520536211.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:11.082Z,1520536211.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:11.473Z,1520536211.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:11.488Z,1520536211.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:11.873Z,1520536211.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:11.894Z,1520536211.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:12.273Z,1520536212.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:12.288Z,1520536212.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:12.670Z,1520536212.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:12.766Z,1520536212.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:13.062Z,1520536213.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:13.077Z,1520536213.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:13.473Z,1520536213.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:13.494Z,1520536213.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:13.863Z,1520536213.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:13.878Z,1520536213.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:14.270Z,1520536214.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:14.285Z,1520536214.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:14.672Z,1520536214.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:14.728Z,1520536214.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:15.066Z,1520536215.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:15.090Z,1520536215.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:15.476Z,1520536215.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:15.491Z,1520536215.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:15.861Z,1520536215.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:15.887Z,1520536215.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:16.266Z,1520536216.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:16.286Z,1520536216.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:16.666Z,1520536216.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:16.681Z,1520536216.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:17.065Z,1520536217.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:17.080Z,1520536217.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:17.473Z,1520536217.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:17.489Z,1520536217.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:17.875Z,1520536217.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:17.891Z,1520536217.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:18.275Z,1520536218.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:18.298Z,1520536218.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:18.668Z,1520536218.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:18.683Z,1520536218.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:19.070Z,1520536219.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:19.091Z,1520536219.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:19.463Z,1520536219.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:19.478Z,1520536219.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:19.870Z,1520536219.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:19.886Z,1520536219.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:20.269Z,1520536220.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:20.284Z,1520536220.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:20.673Z,1520536220.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:20.689Z,1520536220.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:21.072Z,1520536221.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:21.088Z,1520536221.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:21.476Z,1520536221.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:21.491Z,1520536221.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:21.868Z,1520536221.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:21.883Z,1520536221.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:22.266Z,1520536222.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:22.287Z,1520536222.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:22.662Z,1520536222.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:22.681Z,1520536222.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:23.066Z,1520536223.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:23.081Z,1520536223.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:23.466Z,1520536223.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:23.493Z,1520536223.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:23.879Z,1520536223.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:23.899Z,1520536223.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:24.271Z,1520536224.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:24.286Z,1520536224.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:24.659Z,1520536224.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:24.685Z,1520536224.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:25.058Z,1520536225.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:25.095Z,1520536225.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:25.458Z,1520536225.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:25.485Z,1520536225.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:25.853Z,1520536225.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:25.881Z,1520536225.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:26.261Z,1520536226.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:26.289Z,1520536226.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:26.679Z,1520536226.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:26.695Z,1520536226.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:27.065Z,1520536227.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:27.101Z,1520536227.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:27.477Z,1520536227.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:27.496Z,1520536227.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:27.855Z,1520536227.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:27.890Z,1520536227.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:28.261Z,1520536228.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:28.293Z,1520536228.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:28.665Z,1520536228.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:28.699Z,1520536228.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:29.060Z,1520536229.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:29.076Z,1520536229.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:29.464Z,1520536229.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:29.495Z,1520536229.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:29.881Z,1520536229.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:29.911Z,1520536229.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:30.274Z,1520536230.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:30.300Z,1520536230.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:30.662Z,1520536230.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:30.699Z,1520536230.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:31.065Z,1520536231.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:31.108Z,1520536231.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:31.465Z,1520536231.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:31.481Z,1520536231.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:31.864Z,1520536231.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:31.880Z,1520536231.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:32.261Z,1520536232.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:32.276Z,1520536232.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:32.681Z,1520536232.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:32.706Z,1520536232.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:33.063Z,1520536233.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:33.078Z,1520536233.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:33.477Z,1520536233.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:33.509Z,1520536233.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:33.862Z,1520536233.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:33.877Z,1520536233.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:34.262Z,1520536234.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:34.282Z,1520536234.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:34.666Z,1520536234.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:34.687Z,1520536234.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:35.063Z,1520536235.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:35.078Z,1520536235.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:35.465Z,1520536235.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:35.481Z,1520536235.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:35.881Z,1520536235.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:35.912Z,1520536235.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:36.269Z,1520536236.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:36.290Z,1520536236.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:36.663Z,1520536236.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:36.686Z,1520536236.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:37.063Z,1520536237.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:37.079Z,1520536237.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:37.468Z,1520536237.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:37.483Z,1520536237.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:37.866Z,1520536237.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:37.881Z,1520536237.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:38.263Z,1520536238.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:38.279Z,1520536238.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:38.665Z,1520536238.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:38.680Z,1520536238.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:39.067Z,1520536239.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:39.083Z,1520536239.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:39.477Z,1520536239.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:39.492Z,1520536239.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:39.866Z,1520536239.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:39.881Z,1520536239.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:40.266Z,1520536240.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:40.286Z,1520536240.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:40.670Z,1520536240.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:40.690Z,1520536240.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:41.067Z,1520536241.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:41.082Z,1520536241.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:41.468Z,1520536241.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:41.484Z,1520536241.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:41.869Z,1520536241.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:41.884Z,1520536241.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:42.273Z,1520536242.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:42.288Z,1520536242.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:42.666Z,1520536242.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:42.682Z,1520536242.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:43.066Z,1520536243.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:43.081Z,1520536243.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:43.463Z,1520536243.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:43.478Z,1520536243.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:43.867Z,1520536243.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:43.882Z,1520536243.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:44.267Z,1520536244.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:44.283Z,1520536244.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:44.668Z,1520536244.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:44.683Z,1520536244.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:45.068Z,1520536245.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:45.083Z,1520536245.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:45.472Z,1520536245.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:45.487Z,1520536245.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:45.867Z,1520536245.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:45.882Z,1520536245.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:46.267Z,1520536246.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:46.282Z,1520536246.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:46.665Z,1520536246.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:46.681Z,1520536246.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:47.065Z,1520536247.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:47.094Z,1520536247.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:47.476Z,1520536247.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:47.492Z,1520536247.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:47.880Z,1520536247.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:47.902Z,1520536247.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:50.985Z,1520536250.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:51.006Z,1520536251.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:51.100Z,1520536251.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:51.131Z,1520536251.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:51.488Z,1520536251.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:51.503Z,1520536251.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:51.888Z,1520536251.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:51.903Z,1520536251.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:52.290Z,1520536252.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:52.311Z,1520536252.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:52.701Z,1520536252.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:52.734Z,1520536252.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:53.093Z,1520536253.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:53.109Z,1520536253.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:53.487Z,1520536253.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:53.503Z,1520536253.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:53.888Z,1520536253.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:53.903Z,1520536253.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:54.288Z,1520536254.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:54.311Z,1520536254.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:54.687Z,1520536254.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:54.702Z,1520536254.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:55.092Z,1520536255.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:55.108Z,1520536255.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:55.492Z,1520536255.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:55.508Z,1520536255.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:55.892Z,1520536255.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:55.907Z,1520536255.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:56.293Z,1520536256.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:56.309Z,1520536256.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:56.691Z,1520536256.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:56.707Z,1520536256.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:57.090Z,1520536257.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:57.107Z,1520536257.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:57.490Z,1520536257.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:57.506Z,1520536257.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:57.891Z,1520536257.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:57.911Z,1520536257.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:58.290Z,1520536258.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:58.306Z,1520536258.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:58.691Z,1520536258.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:58.707Z,1520536258.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:59.097Z,1520536259.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:59.113Z,1520536259.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:59.493Z,1520536259.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:59.509Z,1520536259.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:10:59.891Z,1520536259.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:10:59.907Z,1520536259.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:00.291Z,1520536260.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:00.306Z,1520536260.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:00.690Z,1520536260.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:00.711Z,1520536260.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:01.087Z,1520536261.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:01.103Z,1520536261.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:01.493Z,1520536261.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:01.509Z,1520536261.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:01.894Z,1520536261.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:01.909Z,1520536261.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:02.291Z,1520536262.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:02.311Z,1520536262.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:02.691Z,1520536262.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:02.707Z,1520536262.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:03.086Z,1520536263.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:03.101Z,1520536263.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:03.485Z,1520536263.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:03.507Z,1520536263.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:03.891Z,1520536263.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:03.908Z,1520536263.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:04.291Z,1520536264.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:04.311Z,1520536264.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:04.693Z,1520536264.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:04.711Z,1520536264.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:05.097Z,1520536265.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:05.113Z,1520536265.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:05.493Z,1520536265.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:05.509Z,1520536265.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:05.891Z,1520536265.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:05.907Z,1520536265.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:06.288Z,1520536266.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:06.303Z,1520536266.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:06.693Z,1520536266.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:06.708Z,1520536266.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:07.092Z,1520536267.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:07.107Z,1520536267.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:07.495Z,1520536267.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:07.511Z,1520536267.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:07.897Z,1520536267.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:07.913Z,1520536267.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:08.294Z,1520536268.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:08.310Z,1520536268.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:08.691Z,1520536268.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:08.708Z,1520536268.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:09.087Z,1520536269.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:09.103Z,1520536269.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:09.491Z,1520536269.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:09.507Z,1520536269.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:09.892Z,1520536269.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:09.909Z,1520536269.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:10.291Z,1520536270.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:10.307Z,1520536270.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:10.697Z,1520536270.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:10.713Z,1520536270.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:11.096Z,1520536271.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:11.112Z,1520536271.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:11.497Z,1520536271.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:11.513Z,1520536271.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:11.890Z,1520536271.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:11.911Z,1520536271.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:12.291Z,1520536272.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:12.307Z,1520536272.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:12.691Z,1520536272.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:12.707Z,1520536272.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:13.090Z,1520536273.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:13.107Z,1520536273.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:13.497Z,1520536273.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:13.513Z,1520536273.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:13.897Z,1520536273.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:13.913Z,1520536273.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:14.296Z,1520536274.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:14.312Z,1520536274.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:14.687Z,1520536274.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:14.702Z,1520536274.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:15.091Z,1520536275.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:15.106Z,1520536275.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:15.490Z,1520536275.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:15.511Z,1520536275.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:15.892Z,1520536275.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:15.907Z,1520536275.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:16.292Z,1520536276.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:16.307Z,1520536276.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:16.693Z,1520536276.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:16.711Z,1520536276.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:17.097Z,1520536277.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:17.112Z,1520536277.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:17.496Z,1520536277.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:17.511Z,1520536277.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:17.886Z,1520536277.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:17.901Z,1520536277.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:18.287Z,1520536278.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:18.306Z,1520536278.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:18.691Z,1520536278.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:18.706Z,1520536278.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:19.091Z,1520536279.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:19.106Z,1520536279.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:19.497Z,1520536279.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:19.512Z,1520536279.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:19.897Z,1520536279.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:19.913Z,1520536279.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:20.296Z,1520536280.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:20.318Z,1520536280.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:20.691Z,1520536280.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:20.706Z,1520536280.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:21.091Z,1520536281.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:21.107Z,1520536281.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:21.490Z,1520536281.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:21.511Z,1520536281.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:21.891Z,1520536281.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:21.907Z,1520536281.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:22.290Z,1520536282.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:22.311Z,1520536282.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:22.695Z,1520536282.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:22.711Z,1520536282.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:23.098Z,1520536283.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:23.113Z,1520536283.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:23.495Z,1520536283.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:23.511Z,1520536283.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:23.890Z,1520536283.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:23.911Z,1520536283.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:24.291Z,1520536284.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:24.306Z,1520536284.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:24.691Z,1520536284.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:24.707Z,1520536284.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:25.090Z,1520536285.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:25.108Z,1520536285.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:25.496Z,1520536285.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:25.511Z,1520536285.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:25.897Z,1520536285.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:25.913Z,1520536285.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:26.295Z,1520536286.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:26.318Z,1520536286.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:26.691Z,1520536286.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:26.706Z,1520536286.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:27.090Z,1520536287.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:27.111Z,1520536287.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:27.490Z,1520536287.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:27.511Z,1520536287.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:27.893Z,1520536287.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:27.908Z,1520536287.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:28.290Z,1520536288.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:28.306Z,1520536288.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:28.697Z,1520536288.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:28.713Z,1520536288.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:29.096Z,1520536289.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:29.111Z,1520536289.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:29.495Z,1520536289.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:29.518Z,1520536289.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:29.886Z,1520536289.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:29.902Z,1520536289.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:30.286Z,1520536290.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:30.301Z,1520536290.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:30.691Z,1520536290.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:30.707Z,1520536290.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:31.086Z,1520536291.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:31.101Z,1520536291.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:31.496Z,1520536291.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:31.518Z,1520536291.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:31.895Z,1520536291.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:31.919Z,1520536291.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:32.294Z,1520536292.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:32.311Z,1520536292.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:32.688Z,1520536292.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:32.703Z,1520536292.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:33.086Z,1520536293.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:33.101Z,1520536293.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:33.494Z,1520536293.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:33.511Z,1520536293.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:33.888Z,1520536293.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:33.903Z,1520536293.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:34.290Z,1520536294.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:34.311Z,1520536294.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:34.695Z,1520536294.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:34.712Z,1520536294.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:35.096Z,1520536295.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:35.111Z,1520536295.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:35.496Z,1520536295.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:35.511Z,1520536295.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:35.890Z,1520536295.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:35.911Z,1520536295.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:36.291Z,1520536296.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:36.306Z,1520536296.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:36.691Z,1520536296.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:36.707Z,1520536296.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:37.086Z,1520536297.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:37.101Z,1520536297.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:37.497Z,1520536297.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:37.518Z,1520536297.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:37.894Z,1520536297.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:37.911Z,1520536297.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:38.296Z,1520536298.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:38.318Z,1520536298.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:38.691Z,1520536298.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:38.706Z,1520536298.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:39.090Z,1520536299.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:39.111Z,1520536299.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:39.490Z,1520536299.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:39.511Z,1520536299.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:39.891Z,1520536299.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:39.907Z,1520536299.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:40.290Z,1520536300.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:40.311Z,1520536300.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:40.695Z,1520536300.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:40.719Z,1520536300.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:41.096Z,1520536301.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:41.111Z,1520536301.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:41.496Z,1520536301.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:41.511Z,1520536301.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:41.886Z,1520536301.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:41.901Z,1520536301.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:42.286Z,1520536302.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:42.311Z,1520536302.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:42.691Z,1520536302.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:42.707Z,1520536302.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:43.095Z,1520536303.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:43.111Z,1520536303.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:43.499Z,1520536303.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:43.514Z,1520536303.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:43.896Z,1520536303.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:43.912Z,1520536303.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:44.301Z,1520536304.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:44.322Z,1520536304.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:44.697Z,1520536304.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:44.724Z,1520536304.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:45.089Z,1520536305.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:45.105Z,1520536305.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:45.498Z,1520536305.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:45.514Z,1520536305.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:45.891Z,1520536305.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:45.914Z,1520536305.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:46.281Z,1520536306.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:46.320Z,1520536306.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:46.698Z,1520536306.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:46.714Z,1520536306.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:47.102Z,1520536307.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:47.117Z,1520536307.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:47.120Z,1520536307.120 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T19:11:47.121Z,1520536307.121 [Default:CheckIn:C.Wait] Stopped
2018-03-08T19:11:47.121Z,1520536307.121 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T19:11:47.121Z,1520536307.121 [Default:CheckIn:D] Running Loop=1
2018-03-08T19:11:47.512Z,1520536307.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:47.552Z,1520536307.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:47.563Z,1520536307.563 [Default:CheckIn:D] Stopped
2018-03-08T19:11:47.563Z,1520536307.563 [Default:CheckIn:E] Running Loop=1
2018-03-08T19:11:47.886Z,1520536307.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:47.946Z,1520536307.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:47.966Z,1520536307.966 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 686.045964 min 
2018-03-08T19:11:47.966Z,1520536307.966 [Default:CheckIn:E] Stopped
2018-03-08T19:11:47.966Z,1520536307.966 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T19:11:47.967Z,1520536307.967 [Default:CheckIn] Stopped
2018-03-08T19:11:47.967Z,1520536307.967 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T19:11:47.967Z,1520536307.967 [Default:CheckIn](INFO): Running loop #67
2018-03-08T19:11:47.967Z,1520536307.967 [Default:CheckIn] Running Loop=67
2018-03-08T19:11:47.967Z,1520536307.967 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T19:11:47.967Z,1520536307.967 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T19:11:51.422Z,1520536311.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:51.442Z,1520536311.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:51.529Z,1520536311.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:51.544Z,1520536311.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:51.942Z,1520536311.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:51.973Z,1520536311.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:52.337Z,1520536312.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:52.353Z,1520536312.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:52.732Z,1520536312.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:52.748Z,1520536312.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:53.131Z,1520536313.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:53.147Z,1520536313.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:53.523Z,1520536313.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:53.538Z,1520536313.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:53.918Z,1520536313.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:53.947Z,1520536313.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:54.335Z,1520536314.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:54.350Z,1520536314.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:54.738Z,1520536314.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:54.754Z,1520536314.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:55.140Z,1520536315.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:55.156Z,1520536315.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:55.540Z,1520536315.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:55.562Z,1520536315.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:55.916Z,1520536315.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:55.943Z,1520536315.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:56.330Z,1520536316.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:56.351Z,1520536316.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:56.728Z,1520536316.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:56.743Z,1520536316.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:57.114Z,1520536317.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:57.143Z,1520536317.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:57.533Z,1520536317.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:57.549Z,1520536317.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:57.939Z,1520536317.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:57.955Z,1520536317.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:57.989Z,1520536317.989 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T19:11:58.341Z,1520536318.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:58.362Z,1520536318.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:58.731Z,1520536318.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:58.746Z,1520536318.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:59.121Z,1520536319.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:59.143Z,1520536319.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:59.525Z,1520536319.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:59.547Z,1520536319.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:11:59.923Z,1520536319.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:11:59.950Z,1520536319.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:00.318Z,1520536320.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:00.351Z,1520536320.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:00.742Z,1520536320.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:00.758Z,1520536320.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:01.145Z,1520536321.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:01.160Z,1520536321.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:01.541Z,1520536321.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:01.557Z,1520536321.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:01.914Z,1520536321.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:01.958Z,1520536321.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:02.316Z,1520536322.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:02.332Z,1520536322.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:02.723Z,1520536322.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:02.755Z,1520536322.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:03.122Z,1520536323.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:03.137Z,1520536323.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:03.179Z,1520536323.179 [CBIT](INFO): Clearing failed state for component DropWeight
2018-03-08T19:12:03.180Z,1520536323.180 [DropWeight] No Fault, FailCount= 1
2018-03-08T19:12:03.534Z,1520536323.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:03.561Z,1520536323.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:03.950Z,1520536323.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:03.965Z,1520536323.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:04.333Z,1520536324.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:04.366Z,1520536324.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:04.720Z,1520536324.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:04.735Z,1520536324.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:05.123Z,1520536325.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:05.159Z,1520536325.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:05.519Z,1520536325.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:05.535Z,1520536325.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:05.920Z,1520536325.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:05.936Z,1520536325.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:06.327Z,1520536326.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:06.362Z,1520536326.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:06.733Z,1520536326.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:06.772Z,1520536326.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:07.141Z,1520536327.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:07.170Z,1520536327.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:07.537Z,1520536327.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:07.571Z,1520536327.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:07.919Z,1520536327.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:07.954Z,1520536327.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:08.324Z,1520536328.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:08.350Z,1520536328.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:08.719Z,1520536328.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:08.746Z,1520536328.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:09.114Z,1520536329.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:09.147Z,1520536329.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:09.570Z,1520536329.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:09.593Z,1520536329.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:09.941Z,1520536329.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:09.957Z,1520536329.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:10.343Z,1520536330.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:10.358Z,1520536330.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:10.735Z,1520536330.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:10.766Z,1520536330.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:11.128Z,1520536331.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:11.143Z,1520536331.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:11.522Z,1520536331.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:11.537Z,1520536331.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:11.929Z,1520536331.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:11.944Z,1520536331.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:12.328Z,1520536332.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:12.343Z,1520536332.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:12.729Z,1520536332.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:12.744Z,1520536332.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:13.141Z,1520536333.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:13.172Z,1520536333.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:13.537Z,1520536333.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:13.552Z,1520536333.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:13.928Z,1520536333.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:13.943Z,1520536333.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:14.328Z,1520536334.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:14.344Z,1520536334.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:14.727Z,1520536334.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:14.743Z,1520536334.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:15.123Z,1520536335.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:15.139Z,1520536335.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:15.534Z,1520536335.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:15.549Z,1520536335.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:15.941Z,1520536335.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:15.973Z,1520536335.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:16.333Z,1520536336.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:16.348Z,1520536336.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:16.730Z,1520536336.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:16.745Z,1520536336.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:17.131Z,1520536337.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:17.146Z,1520536337.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:17.530Z,1520536337.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:17.545Z,1520536337.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:17.931Z,1520536337.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:17.947Z,1520536337.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:18.327Z,1520536338.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:18.342Z,1520536338.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:18.733Z,1520536338.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:18.748Z,1520536338.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:19.141Z,1520536339.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:19.163Z,1520536339.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:19.533Z,1520536339.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:19.561Z,1520536339.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:19.924Z,1520536339.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:19.939Z,1520536339.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:20.324Z,1520536340.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:20.344Z,1520536340.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:20.729Z,1520536340.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:20.744Z,1520536340.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:21.127Z,1520536341.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:21.142Z,1520536341.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:21.537Z,1520536341.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:21.569Z,1520536341.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:21.941Z,1520536341.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:21.956Z,1520536341.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:22.333Z,1520536342.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:22.348Z,1520536342.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:22.731Z,1520536342.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:22.746Z,1520536342.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:23.130Z,1520536343.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:23.145Z,1520536343.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:23.528Z,1520536343.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:23.543Z,1520536343.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:23.931Z,1520536343.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:23.947Z,1520536343.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:24.330Z,1520536344.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:24.345Z,1520536344.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:24.735Z,1520536344.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:24.750Z,1520536344.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:25.133Z,1520536345.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:25.154Z,1520536345.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:25.536Z,1520536345.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:25.563Z,1520536345.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:25.933Z,1520536345.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:25.948Z,1520536345.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:26.331Z,1520536346.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:26.346Z,1520536346.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:26.732Z,1520536346.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:26.747Z,1520536346.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:27.130Z,1520536347.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:27.145Z,1520536347.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:27.536Z,1520536347.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:27.561Z,1520536347.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:27.941Z,1520536347.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:27.962Z,1520536347.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:28.342Z,1520536348.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:28.362Z,1520536348.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:28.716Z,1520536348.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:28.743Z,1520536348.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:29.123Z,1520536349.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:29.146Z,1520536349.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:29.535Z,1520536349.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:29.550Z,1520536349.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:29.925Z,1520536349.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:29.946Z,1520536349.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:30.332Z,1520536350.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:30.348Z,1520536350.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:30.742Z,1520536350.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:30.757Z,1520536350.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:31.138Z,1520536351.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:31.158Z,1520536351.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:31.540Z,1520536351.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:31.563Z,1520536351.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:31.932Z,1520536351.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:31.947Z,1520536351.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:32.333Z,1520536352.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:32.348Z,1520536352.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:32.728Z,1520536352.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:32.750Z,1520536352.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:33.128Z,1520536353.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:33.144Z,1520536353.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:33.537Z,1520536353.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:33.559Z,1520536353.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:33.940Z,1520536353.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:33.962Z,1520536353.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:34.342Z,1520536354.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:34.357Z,1520536354.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:34.731Z,1520536354.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:34.750Z,1520536354.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:35.127Z,1520536355.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:35.147Z,1520536355.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:35.527Z,1520536355.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:35.550Z,1520536355.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:35.925Z,1520536355.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:35.941Z,1520536355.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:36.327Z,1520536356.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:36.347Z,1520536356.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:36.738Z,1520536356.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:36.753Z,1520536356.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:37.138Z,1520536357.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:37.153Z,1520536357.153 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:37.153Z,1520536357.153 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 229
2018-03-08T19:12:37.153Z,1520536357.153 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T19:12:37.155Z,1520536357.155 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:37.155Z,1520536357.155 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 229
2018-03-08T19:12:37.155Z,1520536357.155 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T19:12:37.157Z,1520536357.157 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:37.157Z,1520536357.157 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 229
2018-03-08T19:12:37.157Z,1520536357.157 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T19:12:37.197Z,1520536357.197 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T19:12:37.197Z,1520536357.197 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T19:12:37.197Z,1520536357.197 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T19:12:37.534Z,1520536357.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:37.565Z,1520536357.565 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T19:12:37.566Z,1520536357.566 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 229
2018-03-08T19:12:37.566Z,1520536357.566 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T19:12:37.566Z,1520536357.566 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 229
2018-03-08T19:12:37.567Z,1520536357.567 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T19:12:37.567Z,1520536357.567 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 229
2018-03-08T19:12:37.919Z,1520536357.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:37.954Z,1520536357.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T19:12:37.955Z,1520536357.955 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:12:37.955Z,1520536357.955 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:12:37.955Z,1520536357.955 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T19:12:37.956Z,1520536357.956 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:12:37.956Z,1520536357.956 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:12:37.957Z,1520536357.957 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T19:12:37.957Z,1520536357.957 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:12:37.957Z,1520536357.957 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:12:38.319Z,1520536358.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:38.354Z,1520536358.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T19:12:38.355Z,1520536358.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:38.719Z,1520536358.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:38.750Z,1520536358.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T19:12:38.751Z,1520536358.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:39.119Z,1520536359.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:39.134Z,1520536359.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T19:12:39.135Z,1520536359.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:39.529Z,1520536359.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:39.562Z,1520536359.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T19:12:39.563Z,1520536359.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:39.941Z,1520536359.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:39.970Z,1520536359.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T19:12:39.971Z,1520536359.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:40.336Z,1520536360.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:40.364Z,1520536360.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T19:12:40.365Z,1520536360.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:40.727Z,1520536360.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:40.762Z,1520536360.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T19:12:40.763Z,1520536360.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:41.127Z,1520536361.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:41.142Z,1520536361.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T19:12:41.143Z,1520536361.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:41.526Z,1520536361.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:41.541Z,1520536361.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T19:12:41.542Z,1520536361.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:41.923Z,1520536361.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:41.938Z,1520536361.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T19:12:41.939Z,1520536361.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:42.323Z,1520536362.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:42.351Z,1520536362.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T19:12:42.352Z,1520536362.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:42.741Z,1520536362.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:42.756Z,1520536362.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T19:12:42.780Z,1520536362.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:43.128Z,1520536363.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:43.150Z,1520536363.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T19:12:43.151Z,1520536363.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:43.532Z,1520536363.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:43.554Z,1520536363.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T19:12:43.555Z,1520536363.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:43.931Z,1520536363.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:43.946Z,1520536363.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T19:12:43.947Z,1520536363.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:44.330Z,1520536364.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:44.350Z,1520536364.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T19:12:44.351Z,1520536364.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:44.731Z,1520536364.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:44.746Z,1520536364.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T19:12:44.747Z,1520536364.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:45.130Z,1520536365.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:45.145Z,1520536365.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T19:12:45.146Z,1520536365.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:45.532Z,1520536365.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:45.547Z,1520536365.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T19:12:45.548Z,1520536365.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:45.934Z,1520536365.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:45.954Z,1520536365.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T19:12:45.955Z,1520536365.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:46.333Z,1520536366.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:46.354Z,1520536366.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T19:12:46.355Z,1520536366.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:46.730Z,1520536366.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:46.745Z,1520536366.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T19:12:46.746Z,1520536366.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:47.125Z,1520536367.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:47.140Z,1520536367.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T19:12:47.141Z,1520536367.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:47.527Z,1520536367.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:47.542Z,1520536367.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T19:12:47.543Z,1520536367.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:47.927Z,1520536367.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:47.943Z,1520536367.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T19:12:47.943Z,1520536367.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:51.031Z,1520536371.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:51.048Z,1520536371.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2018-03-08T19:12:51.049Z,1520536371.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:51.153Z,1520536371.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:51.184Z,1520536371.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T19:12:51.185Z,1520536371.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:51.553Z,1520536371.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:51.583Z,1520536371.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T19:12:51.584Z,1520536371.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:51.949Z,1520536371.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:51.984Z,1520536371.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T19:12:51.985Z,1520536371.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:52.336Z,1520536372.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:52.351Z,1520536372.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T19:12:52.352Z,1520536372.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:52.736Z,1520536372.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:52.752Z,1520536372.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T19:12:52.753Z,1520536372.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:53.135Z,1520536373.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:53.151Z,1520536373.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T19:12:53.151Z,1520536373.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:53.537Z,1520536373.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:53.553Z,1520536373.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T19:12:53.553Z,1520536373.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:53.949Z,1520536373.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:53.964Z,1520536373.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T19:12:53.981Z,1520536373.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:54.345Z,1520536374.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:54.360Z,1520536374.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T19:12:54.361Z,1520536374.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:54.738Z,1520536374.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:54.754Z,1520536374.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T19:12:54.755Z,1520536374.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:55.135Z,1520536375.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:55.154Z,1520536375.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T19:12:55.155Z,1520536375.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:55.541Z,1520536375.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:55.556Z,1520536375.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T19:12:55.557Z,1520536375.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:55.933Z,1520536375.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:55.949Z,1520536375.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T19:12:55.949Z,1520536375.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:56.329Z,1520536376.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:56.356Z,1520536376.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T19:12:56.357Z,1520536376.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:56.745Z,1520536376.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:56.760Z,1520536376.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T19:12:56.761Z,1520536376.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:57.142Z,1520536377.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:57.162Z,1520536377.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:57.546Z,1520536377.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:57.561Z,1520536377.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:57.931Z,1520536377.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:57.958Z,1520536377.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:58.339Z,1520536378.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:58.362Z,1520536378.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:58.729Z,1520536378.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:58.762Z,1520536378.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:59.140Z,1520536379.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:59.155Z,1520536379.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:59.545Z,1520536379.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:59.567Z,1520536379.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:12:59.948Z,1520536379.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:12:59.963Z,1520536379.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:00.350Z,1520536380.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:00.365Z,1520536380.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:00.735Z,1520536380.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:00.755Z,1520536380.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:01.135Z,1520536381.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:01.154Z,1520536381.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:01.533Z,1520536381.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:01.562Z,1520536381.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:01.939Z,1520536381.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:01.962Z,1520536381.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:02.327Z,1520536382.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:02.363Z,1520536382.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:02.754Z,1520536382.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:02.774Z,1520536382.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:03.153Z,1520536383.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:03.171Z,1520536383.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:03.549Z,1520536383.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:03.570Z,1520536383.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:03.931Z,1520536383.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:03.959Z,1520536383.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:04.327Z,1520536384.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:04.355Z,1520536384.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:04.726Z,1520536384.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:04.758Z,1520536384.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:05.128Z,1520536385.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:05.167Z,1520536385.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:05.537Z,1520536385.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:05.570Z,1520536385.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:05.941Z,1520536385.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:05.979Z,1520536385.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:06.342Z,1520536386.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:06.368Z,1520536386.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:06.735Z,1520536386.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:06.769Z,1520536386.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:07.136Z,1520536387.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:07.170Z,1520536387.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:07.535Z,1520536387.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:07.573Z,1520536387.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:07.934Z,1520536387.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:07.968Z,1520536387.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:08.332Z,1520536388.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:08.368Z,1520536388.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:08.757Z,1520536388.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:08.773Z,1520536388.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:09.142Z,1520536389.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:09.168Z,1520536389.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:09.545Z,1520536389.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:09.572Z,1520536389.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:09.928Z,1520536389.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:09.943Z,1520536389.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:10.335Z,1520536390.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:10.350Z,1520536390.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:10.746Z,1520536390.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:10.826Z,1520536390.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:11.142Z,1520536391.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:11.187Z,1520536391.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:11.550Z,1520536391.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:11.575Z,1520536391.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:11.946Z,1520536391.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:11.978Z,1520536391.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:12.345Z,1520536392.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:12.380Z,1520536392.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:12.727Z,1520536392.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:12.751Z,1520536392.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:13.136Z,1520536393.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:13.151Z,1520536393.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:13.535Z,1520536393.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:13.551Z,1520536393.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:13.932Z,1520536393.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:13.948Z,1520536393.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:14.335Z,1520536394.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:14.351Z,1520536394.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:14.745Z,1520536394.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:14.760Z,1520536394.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:15.145Z,1520536395.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:15.160Z,1520536395.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:15.549Z,1520536395.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:15.581Z,1520536395.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:15.938Z,1520536395.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:15.953Z,1520536395.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:16.338Z,1520536396.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:16.353Z,1520536396.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:16.734Z,1520536396.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:16.758Z,1520536396.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:17.138Z,1520536397.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:17.153Z,1520536397.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:17.544Z,1520536397.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:17.560Z,1520536397.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:17.944Z,1520536397.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:17.959Z,1520536397.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:18.345Z,1520536398.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:18.359Z,1520536398.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:18.739Z,1520536398.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:18.762Z,1520536398.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:19.136Z,1520536399.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:19.158Z,1520536399.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:19.537Z,1520536399.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:19.567Z,1520536399.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:19.936Z,1520536399.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:19.952Z,1520536399.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:20.347Z,1520536400.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:20.362Z,1520536400.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:20.750Z,1520536400.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:20.766Z,1520536400.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:21.152Z,1520536401.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:21.179Z,1520536401.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:21.563Z,1520536401.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:21.606Z,1520536401.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:21.928Z,1520536401.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:21.983Z,1520536401.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:22.327Z,1520536402.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:22.362Z,1520536402.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:22.727Z,1520536402.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:22.763Z,1520536402.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:23.130Z,1520536403.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:23.164Z,1520536403.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:23.551Z,1520536403.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:23.566Z,1520536403.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:23.949Z,1520536403.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:23.967Z,1520536403.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:24.351Z,1520536404.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:24.366Z,1520536404.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:24.727Z,1520536404.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:24.762Z,1520536404.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:25.126Z,1520536405.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:25.162Z,1520536405.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:25.527Z,1520536405.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:25.550Z,1520536405.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:25.927Z,1520536405.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:25.966Z,1520536405.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:26.331Z,1520536406.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:26.367Z,1520536406.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:26.773Z,1520536406.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:26.788Z,1520536406.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:27.141Z,1520536407.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:27.168Z,1520536407.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:27.537Z,1520536407.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:27.563Z,1520536407.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:27.931Z,1520536407.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:27.960Z,1520536407.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:28.336Z,1520536408.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:28.351Z,1520536408.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:28.739Z,1520536408.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:28.775Z,1520536408.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:29.132Z,1520536409.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:29.147Z,1520536409.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:29.594Z,1520536409.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:29.624Z,1520536409.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:29.945Z,1520536409.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:29.973Z,1520536409.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:30.349Z,1520536410.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:30.364Z,1520536410.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:30.747Z,1520536410.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:30.762Z,1520536410.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:31.139Z,1520536411.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:31.155Z,1520536411.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:31.527Z,1520536411.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:31.559Z,1520536411.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:31.929Z,1520536411.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:31.944Z,1520536411.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:32.330Z,1520536412.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:32.346Z,1520536412.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:32.745Z,1520536412.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:32.769Z,1520536412.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:33.141Z,1520536413.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:33.176Z,1520536413.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:33.545Z,1520536413.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:33.581Z,1520536413.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:33.933Z,1520536413.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:33.947Z,1520536413.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:34.331Z,1520536414.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:34.355Z,1520536414.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:34.736Z,1520536414.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:34.751Z,1520536414.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:35.135Z,1520536415.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:35.151Z,1520536415.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:35.549Z,1520536415.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:35.579Z,1520536415.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:35.941Z,1520536415.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:35.957Z,1520536415.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:36.341Z,1520536416.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:36.358Z,1520536416.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:36.732Z,1520536416.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:36.747Z,1520536416.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:37.136Z,1520536417.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:37.159Z,1520536417.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:37.535Z,1520536417.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:37.551Z,1520536417.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:37.937Z,1520536417.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:37.953Z,1520536417.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:38.335Z,1520536418.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:38.359Z,1520536418.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:38.749Z,1520536418.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:38.764Z,1520536418.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:39.145Z,1520536419.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:39.161Z,1520536419.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:39.541Z,1520536419.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:39.557Z,1520536419.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:39.939Z,1520536419.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:39.954Z,1520536419.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:40.338Z,1520536420.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:40.353Z,1520536420.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:40.739Z,1520536420.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:40.754Z,1520536420.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:41.138Z,1520536421.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:41.153Z,1520536421.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:41.540Z,1520536421.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:41.559Z,1520536421.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:41.945Z,1520536421.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:41.961Z,1520536421.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:42.350Z,1520536422.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:42.401Z,1520536422.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:42.749Z,1520536422.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:42.801Z,1520536422.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:43.138Z,1520536423.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:43.155Z,1520536423.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:43.539Z,1520536423.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:43.554Z,1520536423.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:43.938Z,1520536423.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:43.962Z,1520536423.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:44.357Z,1520536424.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:44.380Z,1520536424.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:44.753Z,1520536424.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:44.769Z,1520536424.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:45.150Z,1520536425.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:45.182Z,1520536425.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:45.546Z,1520536425.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:45.605Z,1520536425.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:45.927Z,1520536425.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:45.966Z,1520536425.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:46.329Z,1520536426.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:46.372Z,1520536426.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:46.754Z,1520536426.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:46.771Z,1520536426.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:47.134Z,1520536427.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:47.166Z,1520536427.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:47.549Z,1520536427.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:47.565Z,1520536427.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:47.955Z,1520536427.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:47.971Z,1520536427.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:51.207Z,1520536431.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:51.223Z,1520536431.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:51.327Z,1520536431.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:51.367Z,1520536431.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:51.679Z,1520536431.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:51.715Z,1520536431.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:52.076Z,1520536432.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:52.091Z,1520536432.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:52.479Z,1520536432.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:52.495Z,1520536432.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:52.889Z,1520536432.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:52.923Z,1520536432.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:53.293Z,1520536433.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:53.326Z,1520536433.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:53.689Z,1520536433.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:53.721Z,1520536433.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:54.081Z,1520536434.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:54.102Z,1520536434.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:54.483Z,1520536434.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:54.498Z,1520536434.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:54.879Z,1520536434.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:54.894Z,1520536434.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:55.283Z,1520536435.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:55.298Z,1520536435.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:55.686Z,1520536435.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:55.701Z,1520536435.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:56.086Z,1520536436.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:56.101Z,1520536436.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:56.485Z,1520536436.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:56.501Z,1520536436.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:56.885Z,1520536436.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:56.900Z,1520536436.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:57.273Z,1520536437.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:57.297Z,1520536437.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:57.680Z,1520536437.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:57.702Z,1520536437.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:58.085Z,1520536438.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:58.100Z,1520536438.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:58.484Z,1520536438.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:58.499Z,1520536438.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:58.886Z,1520536438.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:58.902Z,1520536438.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:59.290Z,1520536439.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:59.305Z,1520536439.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:13:59.685Z,1520536439.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:13:59.701Z,1520536439.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:00.079Z,1520536440.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:00.094Z,1520536440.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:00.480Z,1520536440.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:00.495Z,1520536440.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:00.884Z,1520536440.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:00.900Z,1520536440.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:01.280Z,1520536441.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:01.295Z,1520536441.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:01.685Z,1520536441.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:01.700Z,1520536441.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:02.084Z,1520536442.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:02.100Z,1520536442.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:02.486Z,1520536442.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:02.501Z,1520536442.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:02.882Z,1520536442.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:02.897Z,1520536442.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:03.271Z,1520536443.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:03.299Z,1520536443.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:03.684Z,1520536443.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:03.700Z,1520536443.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:04.080Z,1520536444.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:04.096Z,1520536444.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:04.483Z,1520536444.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:04.499Z,1520536444.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:04.889Z,1520536444.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:04.905Z,1520536444.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:05.288Z,1520536445.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:05.304Z,1520536445.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:05.689Z,1520536445.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:05.705Z,1520536445.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:06.083Z,1520536446.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:06.098Z,1520536446.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:06.484Z,1520536446.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:06.499Z,1520536446.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:06.878Z,1520536446.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:06.893Z,1520536446.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:07.275Z,1520536447.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:07.297Z,1520536447.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:07.689Z,1520536447.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:07.711Z,1520536447.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:08.085Z,1520536448.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:08.100Z,1520536448.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:08.489Z,1520536448.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:08.511Z,1520536448.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:08.877Z,1520536448.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:08.892Z,1520536448.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:09.272Z,1520536449.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:09.295Z,1520536449.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:09.684Z,1520536449.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:09.699Z,1520536449.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:10.080Z,1520536450.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:10.095Z,1520536450.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:10.483Z,1520536450.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:10.499Z,1520536450.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:10.910Z,1520536450.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:10.951Z,1520536450.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:11.293Z,1520536451.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:11.308Z,1520536451.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:11.692Z,1520536451.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:11.708Z,1520536451.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:12.070Z,1520536452.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:12.090Z,1520536452.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:12.479Z,1520536452.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:12.494Z,1520536452.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:12.881Z,1520536452.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:12.983Z,1520536452.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:13.272Z,1520536453.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:13.287Z,1520536453.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:13.689Z,1520536453.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:13.713Z,1520536453.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:14.081Z,1520536454.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:14.109Z,1520536454.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:14.493Z,1520536454.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:14.517Z,1520536454.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:14.871Z,1520536454.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:14.899Z,1520536454.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:15.271Z,1520536455.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:15.287Z,1520536455.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:15.676Z,1520536455.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:15.773Z,1520536455.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:16.076Z,1520536456.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:16.091Z,1520536456.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:16.479Z,1520536456.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:16.498Z,1520536456.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:16.885Z,1520536456.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:16.916Z,1520536456.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:17.293Z,1520536457.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:17.324Z,1520536457.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:17.681Z,1520536457.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:17.697Z,1520536457.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:18.081Z,1520536458.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:18.096Z,1520536458.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:18.479Z,1520536458.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:18.494Z,1520536458.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:18.877Z,1520536458.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:18.892Z,1520536458.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:19.276Z,1520536459.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:19.295Z,1520536459.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:19.693Z,1520536459.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:19.725Z,1520536459.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:20.082Z,1520536460.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:20.098Z,1520536460.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:20.485Z,1520536460.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:20.500Z,1520536460.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:20.880Z,1520536460.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:20.895Z,1520536460.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:21.271Z,1520536461.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:21.290Z,1520536461.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:21.675Z,1520536461.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:21.704Z,1520536461.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:22.076Z,1520536462.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:22.091Z,1520536462.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:22.480Z,1520536462.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:22.495Z,1520536462.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:22.889Z,1520536462.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:22.920Z,1520536462.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:23.293Z,1520536463.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:23.307Z,1520536463.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:23.682Z,1520536463.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:23.697Z,1520536463.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:24.080Z,1520536464.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:24.095Z,1520536464.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:24.479Z,1520536464.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:24.495Z,1520536464.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:24.877Z,1520536464.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:24.893Z,1520536464.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:25.279Z,1520536465.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:25.294Z,1520536465.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:25.685Z,1520536465.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:25.700Z,1520536465.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:26.084Z,1520536466.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:26.106Z,1520536466.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:26.484Z,1520536466.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:26.506Z,1520536466.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:26.882Z,1520536466.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:26.898Z,1520536466.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:27.272Z,1520536467.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:27.302Z,1520536467.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:27.683Z,1520536467.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:27.698Z,1520536467.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:28.076Z,1520536468.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:28.091Z,1520536468.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:28.483Z,1520536468.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:28.499Z,1520536468.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:28.884Z,1520536468.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:28.899Z,1520536468.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:29.284Z,1520536469.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:29.299Z,1520536469.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:29.684Z,1520536469.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:29.708Z,1520536469.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:30.083Z,1520536470.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:30.098Z,1520536470.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:30.483Z,1520536470.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:30.497Z,1520536470.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:30.878Z,1520536470.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:30.898Z,1520536470.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:31.279Z,1520536471.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:31.294Z,1520536471.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:31.686Z,1520536471.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:31.701Z,1520536471.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:32.085Z,1520536472.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:32.101Z,1520536472.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:32.485Z,1520536472.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:32.500Z,1520536472.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:32.883Z,1520536472.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:32.898Z,1520536472.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:33.272Z,1520536473.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:33.300Z,1520536473.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:33.680Z,1520536473.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:33.702Z,1520536473.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:34.085Z,1520536474.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:34.100Z,1520536474.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:34.480Z,1520536474.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:34.503Z,1520536474.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:34.889Z,1520536474.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:34.905Z,1520536474.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:35.289Z,1520536475.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:35.304Z,1520536475.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:35.689Z,1520536475.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:35.705Z,1520536475.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:36.084Z,1520536476.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:36.099Z,1520536476.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:36.476Z,1520536476.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:36.495Z,1520536476.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:36.877Z,1520536476.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:36.894Z,1520536476.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:37.279Z,1520536477.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:37.295Z,1520536477.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:37.689Z,1520536477.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:37.705Z,1520536477.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:38.088Z,1520536478.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:38.104Z,1520536478.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:38.488Z,1520536478.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:38.504Z,1520536478.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:38.881Z,1520536478.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:38.895Z,1520536478.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:39.278Z,1520536479.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:39.294Z,1520536479.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:39.680Z,1520536479.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:39.695Z,1520536479.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:40.086Z,1520536480.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:40.101Z,1520536480.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:40.484Z,1520536480.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:40.499Z,1520536480.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:40.889Z,1520536480.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:40.904Z,1520536480.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:41.290Z,1520536481.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:41.305Z,1520536481.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:41.689Z,1520536481.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:41.704Z,1520536481.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:42.083Z,1520536482.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:42.099Z,1520536482.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:42.479Z,1520536482.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:42.495Z,1520536482.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:42.878Z,1520536482.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:42.894Z,1520536482.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:43.275Z,1520536483.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:43.306Z,1520536483.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:43.689Z,1520536483.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:43.705Z,1520536483.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:44.089Z,1520536484.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:44.104Z,1520536484.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:44.488Z,1520536484.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:44.511Z,1520536484.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:44.884Z,1520536484.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:44.899Z,1520536484.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:45.272Z,1520536485.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:45.295Z,1520536485.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:45.683Z,1520536485.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:45.698Z,1520536485.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:46.084Z,1520536486.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:46.100Z,1520536486.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:46.483Z,1520536486.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:46.498Z,1520536486.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:46.892Z,1520536486.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:46.907Z,1520536486.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:47.293Z,1520536487.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:47.308Z,1520536487.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:47.689Z,1520536487.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:47.704Z,1520536487.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:48.083Z,1520536488.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:48.098Z,1520536488.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:51.176Z,1520536491.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:51.191Z,1520536491.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:51.287Z,1520536491.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:51.330Z,1520536491.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:51.657Z,1520536491.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:51.689Z,1520536491.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:52.061Z,1520536492.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:52.090Z,1520536492.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:52.453Z,1520536492.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:52.485Z,1520536492.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:52.844Z,1520536492.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:52.859Z,1520536492.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:53.247Z,1520536493.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:53.262Z,1520536493.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:53.646Z,1520536493.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:53.673Z,1520536493.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:54.048Z,1520536494.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:54.063Z,1520536494.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:54.453Z,1520536494.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:54.469Z,1520536494.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:54.848Z,1520536494.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:54.867Z,1520536494.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:55.261Z,1520536495.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:55.291Z,1520536495.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:55.647Z,1520536495.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:55.663Z,1520536495.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:56.039Z,1520536496.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:56.067Z,1520536496.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:56.449Z,1520536496.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:56.464Z,1520536496.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:56.849Z,1520536496.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:56.864Z,1520536496.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:57.240Z,1520536497.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:57.259Z,1520536497.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:57.653Z,1520536497.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:57.669Z,1520536497.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:58.057Z,1520536498.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:58.078Z,1520536498.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:58.452Z,1520536498.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:58.468Z,1520536498.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:58.847Z,1520536498.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:58.867Z,1520536498.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:59.252Z,1520536499.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:59.267Z,1520536499.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:14:59.651Z,1520536499.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:14:59.667Z,1520536499.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:00.047Z,1520536500.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:00.062Z,1520536500.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:00.457Z,1520536500.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:00.475Z,1520536500.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:00.852Z,1520536500.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:00.868Z,1520536500.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:01.257Z,1520536501.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:01.278Z,1520536501.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:01.653Z,1520536501.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:01.668Z,1520536501.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:02.039Z,1520536502.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:02.063Z,1520536502.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:02.451Z,1520536502.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:02.466Z,1520536502.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:02.847Z,1520536502.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:02.868Z,1520536502.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:03.243Z,1520536503.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:03.267Z,1520536503.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:03.656Z,1520536503.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:03.679Z,1520536503.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:04.057Z,1520536504.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:04.078Z,1520536504.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:04.456Z,1520536504.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:04.478Z,1520536504.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:04.851Z,1520536504.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:04.867Z,1520536504.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:05.245Z,1520536505.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:05.268Z,1520536505.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:05.639Z,1520536505.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:05.662Z,1520536505.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:06.056Z,1520536506.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:06.071Z,1520536506.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:06.457Z,1520536506.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:06.479Z,1520536506.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:06.857Z,1520536506.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:06.878Z,1520536506.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:07.257Z,1520536507.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:07.278Z,1520536507.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:07.653Z,1520536507.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:07.668Z,1520536507.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:08.044Z,1520536508.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:08.067Z,1520536508.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:08.453Z,1520536508.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:08.468Z,1520536508.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:08.854Z,1520536508.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:08.870Z,1520536508.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:09.252Z,1520536509.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:09.267Z,1520536509.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:09.658Z,1520536509.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:09.679Z,1520536509.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:10.059Z,1520536510.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:10.074Z,1520536510.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:10.457Z,1520536510.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:10.478Z,1520536510.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:10.852Z,1520536510.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:10.869Z,1520536510.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:11.248Z,1520536511.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:11.264Z,1520536511.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:11.639Z,1520536511.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:11.663Z,1520536511.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:12.047Z,1520536512.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:12.062Z,1520536512.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:12.456Z,1520536512.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:12.473Z,1520536512.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:12.853Z,1520536512.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:12.882Z,1520536512.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:13.261Z,1520536513.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:13.276Z,1520536513.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:13.652Z,1520536513.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:13.668Z,1520536513.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:14.035Z,1520536514.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:14.067Z,1520536514.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:14.451Z,1520536514.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:14.466Z,1520536514.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:14.849Z,1520536514.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:14.865Z,1520536514.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:15.252Z,1520536515.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:15.267Z,1520536515.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:15.661Z,1520536515.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:15.677Z,1520536515.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:16.061Z,1520536516.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:16.076Z,1520536516.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:16.460Z,1520536516.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:16.476Z,1520536516.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:16.851Z,1520536516.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:16.867Z,1520536516.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:17.247Z,1520536517.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:17.266Z,1520536517.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:17.653Z,1520536517.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:17.669Z,1520536517.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:18.046Z,1520536518.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:18.063Z,1520536518.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:18.458Z,1520536518.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:18.474Z,1520536518.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:18.856Z,1520536518.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:18.872Z,1520536518.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:19.260Z,1520536519.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:19.276Z,1520536519.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:19.638Z,1520536519.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:19.673Z,1520536519.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:20.043Z,1520536520.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:20.069Z,1520536520.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:20.443Z,1520536520.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:20.469Z,1520536520.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:20.836Z,1520536520.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:20.874Z,1520536520.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:21.243Z,1520536521.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:21.269Z,1520536521.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:21.657Z,1520536521.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:21.679Z,1520536521.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:22.057Z,1520536522.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:22.077Z,1520536522.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:22.462Z,1520536522.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:22.482Z,1520536522.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:22.842Z,1520536522.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:22.869Z,1520536522.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:23.235Z,1520536523.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:23.271Z,1520536523.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:23.643Z,1520536523.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:23.670Z,1520536523.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:24.039Z,1520536524.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:24.071Z,1520536524.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:24.458Z,1520536524.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:24.494Z,1520536524.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:24.865Z,1520536524.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:24.881Z,1520536524.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:25.262Z,1520536525.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:25.277Z,1520536525.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:25.635Z,1520536525.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:25.671Z,1520536525.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:26.043Z,1520536526.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:26.069Z,1520536526.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:26.439Z,1520536526.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:26.471Z,1520536526.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:26.839Z,1520536526.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:26.872Z,1520536526.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:27.243Z,1520536527.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:27.270Z,1520536527.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:27.657Z,1520536527.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:27.679Z,1520536527.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:28.058Z,1520536528.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:28.074Z,1520536528.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:28.462Z,1520536528.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:28.477Z,1520536528.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:28.839Z,1520536528.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:28.867Z,1520536528.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:29.242Z,1520536529.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:29.276Z,1520536529.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:29.641Z,1520536529.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:29.677Z,1520536529.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:30.039Z,1520536530.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:30.054Z,1520536530.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:30.453Z,1520536530.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:30.481Z,1520536530.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:30.857Z,1520536530.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:30.883Z,1520536530.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:31.257Z,1520536531.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:31.284Z,1520536531.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:31.639Z,1520536531.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:31.654Z,1520536531.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:32.047Z,1520536532.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:32.081Z,1520536532.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:32.444Z,1520536532.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:32.459Z,1520536532.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:32.847Z,1520536532.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:32.862Z,1520536532.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:33.240Z,1520536533.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:33.255Z,1520536533.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:33.657Z,1520536533.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:33.680Z,1520536533.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:34.061Z,1520536534.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:34.088Z,1520536534.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:34.457Z,1520536534.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:34.481Z,1520536534.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:34.846Z,1520536534.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:34.861Z,1520536534.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:35.243Z,1520536535.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:35.258Z,1520536535.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:35.647Z,1520536535.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:35.684Z,1520536535.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:36.044Z,1520536536.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:36.059Z,1520536536.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:36.461Z,1520536536.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:36.487Z,1520536536.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:36.861Z,1520536536.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:36.887Z,1520536536.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:37.257Z,1520536537.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:37.280Z,1520536537.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:37.644Z,1520536537.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:37.659Z,1520536537.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:38.047Z,1520536538.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:38.083Z,1520536538.083 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:38.083Z,1520536538.083 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 230
2018-03-08T19:15:38.083Z,1520536538.083 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T19:15:38.089Z,1520536538.089 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:38.089Z,1520536538.089 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 230
2018-03-08T19:15:38.089Z,1520536538.089 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T19:15:38.091Z,1520536538.091 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:38.091Z,1520536538.091 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 230
2018-03-08T19:15:38.091Z,1520536538.091 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T19:15:38.119Z,1520536538.119 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T19:15:38.119Z,1520536538.119 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T19:15:38.120Z,1520536538.120 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T19:15:38.441Z,1520536538.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:38.493Z,1520536538.493 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T19:15:38.493Z,1520536538.493 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 230
2018-03-08T19:15:38.494Z,1520536538.494 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T19:15:38.494Z,1520536538.494 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 230
2018-03-08T19:15:38.494Z,1520536538.494 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T19:15:38.495Z,1520536538.495 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 230
2018-03-08T19:15:38.851Z,1520536538.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:38.866Z,1520536538.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T19:15:38.867Z,1520536538.867 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:15:38.867Z,1520536538.867 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:15:38.867Z,1520536538.867 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T19:15:38.868Z,1520536538.868 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:15:38.868Z,1520536538.868 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:15:38.868Z,1520536538.868 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T19:15:38.869Z,1520536538.869 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:15:38.869Z,1520536538.869 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:15:39.247Z,1520536539.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:39.261Z,1520536539.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T19:15:39.262Z,1520536539.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:39.656Z,1520536539.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:39.671Z,1520536539.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T19:15:39.672Z,1520536539.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:40.056Z,1520536540.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:40.070Z,1520536540.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T19:15:40.071Z,1520536540.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:40.456Z,1520536540.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:40.478Z,1520536540.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T19:15:40.479Z,1520536540.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:40.869Z,1520536540.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:40.902Z,1520536540.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T19:15:40.903Z,1520536540.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:41.254Z,1520536541.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:41.305Z,1520536541.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T19:15:41.306Z,1520536541.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:41.655Z,1520536541.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:41.670Z,1520536541.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T19:15:41.671Z,1520536541.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:42.039Z,1520536542.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:42.078Z,1520536542.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T19:15:42.079Z,1520536542.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:42.464Z,1520536542.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:42.511Z,1520536542.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T19:15:42.511Z,1520536542.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:42.863Z,1520536542.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:42.879Z,1520536542.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T19:15:42.880Z,1520536542.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:43.263Z,1520536543.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:43.285Z,1520536543.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T19:15:43.286Z,1520536543.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:43.639Z,1520536543.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:43.674Z,1520536543.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T19:15:43.675Z,1520536543.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:44.039Z,1520536544.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:44.086Z,1520536544.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T19:15:44.087Z,1520536544.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:44.439Z,1520536544.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:44.474Z,1520536544.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T19:15:44.475Z,1520536544.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:44.856Z,1520536544.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:44.925Z,1520536544.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T19:15:44.926Z,1520536544.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:45.247Z,1520536545.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:45.279Z,1520536545.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T19:15:45.281Z,1520536545.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:45.626Z,1520536545.626 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T19:15:45.626Z,1520536545.626 [NAL9602] Data Fault, FailCount= 4
2018-03-08T19:15:45.626Z,1520536545.626 [NAL9602](ERROR): Data Fault
2018-03-08T19:15:45.643Z,1520536545.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:45.658Z,1520536545.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T19:15:45.659Z,1520536545.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:45.709Z,1520536545.709 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T19:15:46.026Z,1520536546.026 [NAL9602](INFO): Powering down
2018-03-08T19:15:46.043Z,1520536546.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:46.062Z,1520536546.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T19:15:46.063Z,1520536546.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:46.441Z,1520536546.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:46.456Z,1520536546.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T19:15:46.457Z,1520536546.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:46.844Z,1520536546.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:46.859Z,1520536546.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T19:15:46.860Z,1520536546.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:46.901Z,1520536546.901 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T19:15:46.901Z,1520536546.901 [NAL9602] No Fault, FailCount= 4
2018-03-08T19:15:47.247Z,1520536547.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:47.261Z,1520536547.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T19:15:47.262Z,1520536547.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:47.644Z,1520536547.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:47.659Z,1520536547.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T19:15:47.660Z,1520536547.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:48.044Z,1520536548.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:48.067Z,1520536548.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T19:15:48.068Z,1520536548.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:48.447Z,1520536548.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:48.462Z,1520536548.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T19:15:48.463Z,1520536548.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:51.546Z,1520536551.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:51.561Z,1520536551.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2018-03-08T19:15:51.562Z,1520536551.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:51.668Z,1520536551.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:51.702Z,1520536551.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T19:15:51.703Z,1520536551.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:52.042Z,1520536552.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:52.056Z,1520536552.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T19:15:52.057Z,1520536552.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:52.434Z,1520536552.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:52.449Z,1520536552.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T19:15:52.450Z,1520536552.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:52.843Z,1520536552.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:52.858Z,1520536552.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T19:15:52.859Z,1520536552.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:53.235Z,1520536553.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:53.250Z,1520536553.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T19:15:53.251Z,1520536553.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:53.639Z,1520536553.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:53.654Z,1520536553.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T19:15:53.654Z,1520536553.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:54.040Z,1520536554.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:54.055Z,1520536554.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T19:15:54.056Z,1520536554.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:54.434Z,1520536554.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:54.458Z,1520536554.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T19:15:54.459Z,1520536554.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:54.838Z,1520536554.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:54.853Z,1520536554.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T19:15:54.854Z,1520536554.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:55.234Z,1520536555.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:55.250Z,1520536555.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T19:15:55.251Z,1520536555.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:55.634Z,1520536555.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:55.649Z,1520536555.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T19:15:55.650Z,1520536555.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:56.024Z,1520536556.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:56.051Z,1520536556.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T19:15:56.052Z,1520536556.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:56.438Z,1520536556.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:56.454Z,1520536556.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T19:15:56.455Z,1520536556.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:56.834Z,1520536556.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:56.854Z,1520536556.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T19:15:56.855Z,1520536556.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:57.224Z,1520536557.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:57.258Z,1520536557.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T19:15:57.259Z,1520536557.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:57.638Z,1520536557.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:57.653Z,1520536557.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T19:15:57.654Z,1520536557.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:58.034Z,1520536558.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:58.058Z,1520536558.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T19:15:58.059Z,1520536558.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:58.423Z,1520536558.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:58.449Z,1520536558.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:58.839Z,1520536558.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:58.854Z,1520536558.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:59.231Z,1520536559.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:59.252Z,1520536559.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:15:59.638Z,1520536559.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:15:59.653Z,1520536559.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:00.038Z,1520536560.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:00.054Z,1520536560.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:00.435Z,1520536560.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:00.450Z,1520536560.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:00.841Z,1520536560.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:00.856Z,1520536560.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:01.228Z,1520536561.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:01.243Z,1520536561.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:01.627Z,1520536561.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:01.642Z,1520536561.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:02.024Z,1520536562.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:02.038Z,1520536562.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:02.428Z,1520536562.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:02.443Z,1520536562.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:02.827Z,1520536562.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:02.846Z,1520536562.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:03.220Z,1520536563.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:03.235Z,1520536563.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:03.626Z,1520536563.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:03.641Z,1520536563.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:04.027Z,1520536564.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:04.042Z,1520536564.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:04.436Z,1520536564.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:04.541Z,1520536564.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:04.828Z,1520536564.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:04.844Z,1520536564.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:05.227Z,1520536565.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:05.242Z,1520536565.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:05.625Z,1520536565.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:05.640Z,1520536565.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:06.028Z,1520536566.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:06.043Z,1520536566.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:06.443Z,1520536566.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:06.502Z,1520536566.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:06.822Z,1520536566.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:06.837Z,1520536566.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:07.226Z,1520536567.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:07.254Z,1520536567.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:07.632Z,1520536567.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:07.647Z,1520536567.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:08.020Z,1520536568.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:08.056Z,1520536568.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:08.431Z,1520536568.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:08.447Z,1520536568.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:08.831Z,1520536568.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:08.851Z,1520536568.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:09.231Z,1520536569.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:09.246Z,1520536569.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:09.632Z,1520536569.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:09.655Z,1520536569.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:10.035Z,1520536570.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:10.050Z,1520536570.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:10.435Z,1520536570.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:10.450Z,1520536570.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:10.832Z,1520536570.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:10.857Z,1520536570.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:11.238Z,1520536571.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:11.258Z,1520536571.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:11.631Z,1520536571.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:11.646Z,1520536571.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:12.033Z,1520536572.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:12.052Z,1520536572.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:12.439Z,1520536572.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:12.454Z,1520536572.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:12.838Z,1520536572.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:12.853Z,1520536572.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:13.238Z,1520536573.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:13.258Z,1520536573.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:13.638Z,1520536573.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:13.658Z,1520536573.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:14.038Z,1520536574.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:14.053Z,1520536574.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:14.439Z,1520536574.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:14.459Z,1520536574.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:14.838Z,1520536574.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:14.858Z,1520536574.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:15.238Z,1520536575.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:15.253Z,1520536575.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:15.638Z,1520536575.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:15.658Z,1520536575.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:16.034Z,1520536576.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:16.054Z,1520536576.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:16.410Z,1520536576.410 [NAL9602](INFO): Powering up NAL9602
2018-03-08T19:16:16.438Z,1520536576.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:16.458Z,1520536576.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:16.838Z,1520536576.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:16.859Z,1520536576.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:17.239Z,1520536577.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:17.254Z,1520536577.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:17.638Z,1520536577.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:17.653Z,1520536577.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:18.035Z,1520536578.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:18.051Z,1520536578.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:18.434Z,1520536578.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:18.454Z,1520536578.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:18.834Z,1520536578.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:18.849Z,1520536578.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:19.235Z,1520536579.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:19.251Z,1520536579.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:19.634Z,1520536579.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:19.655Z,1520536579.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:20.031Z,1520536580.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:20.047Z,1520536580.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:20.439Z,1520536580.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:20.454Z,1520536580.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:20.834Z,1520536580.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:20.850Z,1520536580.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:21.235Z,1520536581.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:21.251Z,1520536581.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:21.639Z,1520536581.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:21.654Z,1520536581.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:22.039Z,1520536582.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:22.058Z,1520536582.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:22.436Z,1520536582.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:22.451Z,1520536582.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:22.840Z,1520536582.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:22.855Z,1520536582.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:23.235Z,1520536583.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:23.251Z,1520536583.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:23.636Z,1520536583.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:23.651Z,1520536583.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:24.030Z,1520536584.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:24.054Z,1520536584.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:24.437Z,1520536584.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:24.458Z,1520536584.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:24.826Z,1520536584.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:24.855Z,1520536584.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:25.220Z,1520536585.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:25.259Z,1520536585.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:25.629Z,1520536585.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:25.662Z,1520536585.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:26.026Z,1520536586.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:26.054Z,1520536586.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:26.429Z,1520536586.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:26.456Z,1520536586.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:26.849Z,1520536586.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:26.870Z,1520536586.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:27.214Z,1520536587.214 [NAL9602](INFO): NAL9602 initialized
2018-03-08T19:16:27.231Z,1520536587.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:27.263Z,1520536587.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:27.626Z,1520536587.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:27.653Z,1520536587.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:28.050Z,1520536588.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:28.067Z,1520536588.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:28.443Z,1520536588.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:28.471Z,1520536588.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:28.852Z,1520536588.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:28.867Z,1520536588.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:29.231Z,1520536589.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:29.263Z,1520536589.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:29.634Z,1520536589.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:29.669Z,1520536589.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:30.031Z,1520536590.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:30.046Z,1520536590.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:30.449Z,1520536590.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:30.483Z,1520536590.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:30.846Z,1520536590.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:30.871Z,1520536590.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:31.245Z,1520536591.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:31.268Z,1520536591.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:31.636Z,1520536591.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:31.651Z,1520536591.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:32.035Z,1520536592.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:32.054Z,1520536592.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:32.436Z,1520536592.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:32.452Z,1520536592.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:32.834Z,1520536592.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:32.855Z,1520536592.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:33.246Z,1520536593.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:33.281Z,1520536593.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:33.649Z,1520536593.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:33.681Z,1520536593.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:34.045Z,1520536594.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:34.061Z,1520536594.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:34.439Z,1520536594.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:34.455Z,1520536594.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:34.838Z,1520536594.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:34.853Z,1520536594.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:35.244Z,1520536595.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:35.260Z,1520536595.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:35.646Z,1520536595.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:35.662Z,1520536595.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:36.044Z,1520536596.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:36.059Z,1520536596.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:36.433Z,1520536596.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:36.454Z,1520536596.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:36.835Z,1520536596.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:36.855Z,1520536596.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:37.234Z,1520536597.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:37.250Z,1520536597.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:37.645Z,1520536597.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:37.666Z,1520536597.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:38.045Z,1520536598.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:38.061Z,1520536598.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:38.444Z,1520536598.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:38.460Z,1520536598.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:38.836Z,1520536598.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:38.851Z,1520536598.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:39.229Z,1520536599.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:39.253Z,1520536599.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:39.638Z,1520536599.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:39.655Z,1520536599.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:40.035Z,1520536600.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:40.055Z,1520536600.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:40.429Z,1520536600.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:40.463Z,1520536600.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:40.851Z,1520536600.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:40.867Z,1520536600.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:41.245Z,1520536601.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:41.260Z,1520536601.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:41.661Z,1520536601.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:41.686Z,1520536601.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:42.027Z,1520536602.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:42.054Z,1520536602.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:42.435Z,1520536602.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:42.451Z,1520536602.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:42.834Z,1520536602.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:42.854Z,1520536602.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:43.236Z,1520536603.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:43.251Z,1520536603.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:43.649Z,1520536603.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:43.681Z,1520536603.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:44.049Z,1520536604.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:44.081Z,1520536604.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:44.448Z,1520536604.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:44.480Z,1520536604.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:44.831Z,1520536604.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:44.859Z,1520536604.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:45.235Z,1520536605.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:45.251Z,1520536605.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:45.635Z,1520536605.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:45.651Z,1520536605.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:46.034Z,1520536606.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:46.061Z,1520536606.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:46.438Z,1520536606.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:46.453Z,1520536606.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:46.840Z,1520536606.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:46.862Z,1520536606.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:47.242Z,1520536607.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:47.257Z,1520536607.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:47.641Z,1520536607.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:47.657Z,1520536607.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:48.038Z,1520536608.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:48.053Z,1520536608.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:48.057Z,1520536608.057 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T19:11:47.0Z
2018-03-08T19:16:48.057Z,1520536608.057 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T19:16:48.057Z,1520536608.057 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T19:16:48.436Z,1520536608.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:48.451Z,1520536608.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:48.919Z,1520536608.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:48.944Z,1520536608.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:51.935Z,1520536611.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:51.951Z,1520536611.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:52.069Z,1520536612.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:52.111Z,1520536612.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:52.385Z,1520536612.385 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0268.lzma
2018-03-08T19:16:52.417Z,1520536612.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:52.450Z,1520536612.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:52.816Z,1520536612.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:52.841Z,1520536612.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:53.183Z,1520536613.183 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0268.lzma.bak
2018-03-08T19:16:53.183Z,1520536613.183 [DataOverHttps](INFO): SBD MOMSN=7988385
2018-03-08T19:16:53.205Z,1520536613.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:53.241Z,1520536613.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:53.795Z,1520536613.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:53.810Z,1520536613.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:54.005Z,1520536614.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:54.025Z,1520536614.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:57.150Z,1520536617.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:57.166Z,1520536617.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:57.269Z,1520536617.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:57.308Z,1520536617.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:57.646Z,1520536617.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:57.661Z,1520536617.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:58.030Z,1520536618.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:58.058Z,1520536618.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:58.423Z,1520536618.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:58.456Z,1520536618.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:58.825Z,1520536618.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:58.843Z,1520536618.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:16:59.224Z,1520536619.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:16:59.240Z,1520536619.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:03.465Z,1520536623.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:03.481Z,1520536623.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:03.608Z,1520536623.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:03.643Z,1520536623.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:03.914Z,1520536623.914 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0269.lzma
2018-03-08T19:17:03.962Z,1520536623.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:03.979Z,1520536623.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:04.327Z,1520536624.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:04.342Z,1520536624.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:04.711Z,1520536624.711 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0269.lzma.bak
2018-03-08T19:17:04.711Z,1520536624.711 [DataOverHttps](INFO): SBD MOMSN=7988387
2018-03-08T19:17:04.734Z,1520536624.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:04.749Z,1520536624.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:05.325Z,1520536625.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:05.342Z,1520536625.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:05.345Z,1520536625.345 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T19:17:05.345Z,1520536625.345 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T19:17:05.345Z,1520536625.345 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T19:17:05.550Z,1520536625.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:05.574Z,1520536625.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:08.650Z,1520536628.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:08.675Z,1520536628.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:08.781Z,1520536628.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:08.818Z,1520536628.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:09.132Z,1520536629.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:09.147Z,1520536629.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:09.531Z,1520536629.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:09.547Z,1520536629.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:09.934Z,1520536629.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:09.955Z,1520536629.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:10.332Z,1520536630.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:10.347Z,1520536630.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:10.745Z,1520536630.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:10.760Z,1520536630.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:11.136Z,1520536631.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:11.159Z,1520536631.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:11.536Z,1520536631.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:11.552Z,1520536631.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:11.931Z,1520536631.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:11.947Z,1520536631.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:12.334Z,1520536632.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:12.349Z,1520536632.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:12.735Z,1520536632.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:12.758Z,1520536632.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:13.134Z,1520536633.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:13.149Z,1520536633.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:13.536Z,1520536633.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:13.552Z,1520536633.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:13.937Z,1520536633.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:13.953Z,1520536633.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:14.337Z,1520536634.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:14.358Z,1520536634.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:14.728Z,1520536634.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:14.743Z,1520536634.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:15.131Z,1520536635.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:15.146Z,1520536635.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:15.532Z,1520536635.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:15.547Z,1520536635.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:15.935Z,1520536635.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:15.951Z,1520536635.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:16.334Z,1520536636.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:16.354Z,1520536636.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:16.741Z,1520536636.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:16.756Z,1520536636.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:17.137Z,1520536637.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:17.152Z,1520536637.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:17.542Z,1520536637.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:17.557Z,1520536637.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:17.934Z,1520536637.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:17.950Z,1520536637.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:18.335Z,1520536638.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:18.358Z,1520536638.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:18.735Z,1520536638.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:18.751Z,1520536638.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:19.131Z,1520536639.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:19.147Z,1520536639.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:19.539Z,1520536639.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:19.562Z,1520536639.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:19.944Z,1520536639.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:19.966Z,1520536639.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:20.345Z,1520536640.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:20.360Z,1520536640.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:20.731Z,1520536640.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:20.750Z,1520536640.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:21.130Z,1520536641.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:21.147Z,1520536641.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:21.531Z,1520536641.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:21.547Z,1520536641.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:21.919Z,1520536641.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:21.963Z,1520536641.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:22.323Z,1520536642.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:22.343Z,1520536642.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:22.745Z,1520536642.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:22.771Z,1520536642.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:23.145Z,1520536643.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:23.163Z,1520536643.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:23.533Z,1520536643.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:23.571Z,1520536643.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:23.923Z,1520536643.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:23.966Z,1520536643.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:24.324Z,1520536644.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:24.340Z,1520536644.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:24.737Z,1520536644.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:24.764Z,1520536644.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:25.123Z,1520536645.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:25.138Z,1520536645.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:25.537Z,1520536645.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:25.562Z,1520536645.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:25.937Z,1520536645.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:25.953Z,1520536645.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:26.337Z,1520536646.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:26.355Z,1520536646.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:26.728Z,1520536646.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:26.744Z,1520536646.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:27.129Z,1520536647.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:27.156Z,1520536647.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:27.534Z,1520536647.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:27.549Z,1520536647.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:27.937Z,1520536647.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:27.952Z,1520536647.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:28.331Z,1520536648.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:28.346Z,1520536648.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:28.737Z,1520536648.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:28.752Z,1520536648.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:29.138Z,1520536649.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:29.154Z,1520536649.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:29.537Z,1520536649.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:29.553Z,1520536649.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:29.932Z,1520536649.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:29.948Z,1520536649.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:30.335Z,1520536650.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:30.351Z,1520536650.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:30.728Z,1520536650.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:30.757Z,1520536650.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:31.134Z,1520536651.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:31.150Z,1520536651.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:31.537Z,1520536651.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:31.553Z,1520536651.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:31.941Z,1520536651.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:31.957Z,1520536651.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:32.337Z,1520536652.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:32.358Z,1520536652.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:32.729Z,1520536652.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:32.744Z,1520536652.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:33.132Z,1520536653.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:33.147Z,1520536653.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:33.535Z,1520536653.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:33.550Z,1520536653.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:33.936Z,1520536653.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:33.952Z,1520536653.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:34.333Z,1520536654.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:34.350Z,1520536654.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:34.742Z,1520536654.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:34.757Z,1520536654.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:35.136Z,1520536655.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:35.153Z,1520536655.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:35.541Z,1520536655.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:35.557Z,1520536655.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:35.928Z,1520536655.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:35.944Z,1520536655.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:36.335Z,1520536656.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:36.354Z,1520536656.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:36.736Z,1520536656.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:36.751Z,1520536656.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:37.132Z,1520536657.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:37.147Z,1520536657.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:37.538Z,1520536657.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:37.553Z,1520536657.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:37.941Z,1520536657.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:37.957Z,1520536657.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:38.341Z,1520536658.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:38.356Z,1520536658.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:38.738Z,1520536658.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:38.753Z,1520536658.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:39.135Z,1520536659.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:39.151Z,1520536659.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:39.529Z,1520536659.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:39.550Z,1520536659.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:39.937Z,1520536659.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:39.952Z,1520536659.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:40.335Z,1520536660.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:40.354Z,1520536660.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:40.741Z,1520536660.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:40.757Z,1520536660.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:41.141Z,1520536661.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:41.157Z,1520536661.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:41.542Z,1520536661.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:41.557Z,1520536661.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:41.935Z,1520536661.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:41.951Z,1520536661.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:42.323Z,1520536662.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:42.346Z,1520536662.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:42.731Z,1520536662.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:42.755Z,1520536662.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:43.132Z,1520536663.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:43.156Z,1520536663.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:43.540Z,1520536663.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:43.586Z,1520536663.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:43.946Z,1520536663.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:43.970Z,1520536663.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:44.348Z,1520536664.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:44.375Z,1520536664.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:44.727Z,1520536664.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:44.763Z,1520536664.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:45.123Z,1520536665.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:45.158Z,1520536665.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:45.535Z,1520536665.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:45.563Z,1520536665.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:45.923Z,1520536665.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:45.963Z,1520536665.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:46.323Z,1520536666.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:46.359Z,1520536666.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:46.743Z,1520536666.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:46.805Z,1520536666.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:47.138Z,1520536667.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:47.159Z,1520536667.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:47.541Z,1520536667.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:47.570Z,1520536667.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:47.931Z,1520536667.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:47.970Z,1520536667.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:48.320Z,1520536668.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:48.336Z,1520536668.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:48.731Z,1520536668.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:48.767Z,1520536668.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:49.127Z,1520536669.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:49.141Z,1520536669.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:49.529Z,1520536669.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:49.545Z,1520536669.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:49.945Z,1520536669.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:49.974Z,1520536669.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:50.341Z,1520536670.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:50.368Z,1520536670.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:50.731Z,1520536670.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:50.771Z,1520536670.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:51.130Z,1520536671.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:51.150Z,1520536671.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:51.528Z,1520536671.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:51.543Z,1520536671.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:51.933Z,1520536671.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:51.948Z,1520536671.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:52.332Z,1520536672.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:52.347Z,1520536672.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:52.741Z,1520536672.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:52.773Z,1520536672.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:53.130Z,1520536673.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:53.146Z,1520536673.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:53.545Z,1520536673.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:53.577Z,1520536673.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:53.931Z,1520536673.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:53.947Z,1520536673.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:54.319Z,1520536674.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:54.347Z,1520536674.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:54.732Z,1520536674.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:54.747Z,1520536674.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:55.132Z,1520536675.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:55.148Z,1520536675.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:55.529Z,1520536675.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:55.545Z,1520536675.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:55.949Z,1520536675.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:55.972Z,1520536675.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:56.337Z,1520536676.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:56.353Z,1520536676.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:56.732Z,1520536676.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:56.747Z,1520536676.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:57.132Z,1520536677.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:57.154Z,1520536677.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:57.532Z,1520536677.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:57.547Z,1520536677.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:57.932Z,1520536677.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:57.948Z,1520536677.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:58.332Z,1520536678.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:58.347Z,1520536678.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:58.745Z,1520536678.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:58.777Z,1520536678.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:59.136Z,1520536679.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:59.151Z,1520536679.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:59.536Z,1520536679.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:59.559Z,1520536679.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:17:59.935Z,1520536679.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:17:59.952Z,1520536679.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:00.334Z,1520536680.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:00.349Z,1520536680.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:00.735Z,1520536680.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:00.751Z,1520536680.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:01.131Z,1520536681.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:01.147Z,1520536681.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:01.536Z,1520536681.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:01.551Z,1520536681.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:01.937Z,1520536681.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:01.952Z,1520536681.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:02.341Z,1520536682.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:02.357Z,1520536682.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:02.732Z,1520536682.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:02.747Z,1520536682.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:03.131Z,1520536683.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:03.146Z,1520536683.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:03.539Z,1520536683.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:03.628Z,1520536683.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:03.935Z,1520536683.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:03.955Z,1520536683.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:04.334Z,1520536684.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:04.354Z,1520536684.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:04.738Z,1520536684.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:04.754Z,1520536684.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:05.136Z,1520536685.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:05.151Z,1520536685.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:05.550Z,1520536685.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:05.581Z,1520536685.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:05.936Z,1520536685.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:05.951Z,1520536685.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:09.066Z,1520536689.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:09.090Z,1520536689.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:09.194Z,1520536689.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:09.238Z,1520536689.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:09.557Z,1520536689.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:09.593Z,1520536689.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:09.957Z,1520536689.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:09.972Z,1520536689.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:10.354Z,1520536690.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:10.369Z,1520536690.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:10.749Z,1520536690.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:10.764Z,1520536690.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:11.148Z,1520536691.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:11.163Z,1520536691.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:11.550Z,1520536691.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:11.600Z,1520536691.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:11.957Z,1520536691.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:11.972Z,1520536691.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:12.351Z,1520536692.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:12.366Z,1520536692.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:12.754Z,1520536692.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:12.770Z,1520536692.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:13.153Z,1520536693.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:13.174Z,1520536693.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:13.553Z,1520536693.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:13.575Z,1520536693.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:13.941Z,1520536693.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:13.957Z,1520536693.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:14.348Z,1520536694.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:14.371Z,1520536694.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:14.752Z,1520536694.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:14.767Z,1520536694.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:15.136Z,1520536695.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:15.167Z,1520536695.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:15.553Z,1520536695.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:15.569Z,1520536695.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:15.957Z,1520536695.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:15.972Z,1520536695.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:16.353Z,1520536696.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:16.374Z,1520536696.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:16.750Z,1520536696.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:16.766Z,1520536696.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:17.139Z,1520536697.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:17.175Z,1520536697.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:17.532Z,1520536697.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:17.567Z,1520536697.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:17.938Z,1520536697.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:17.975Z,1520536697.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:18.342Z,1520536698.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:18.371Z,1520536698.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:18.766Z,1520536698.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:18.781Z,1520536698.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:19.169Z,1520536699.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:19.184Z,1520536699.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:19.562Z,1520536699.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:19.577Z,1520536699.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:19.937Z,1520536699.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:19.971Z,1520536699.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:20.339Z,1520536700.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:20.366Z,1520536700.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:20.736Z,1520536700.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:20.779Z,1520536700.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:21.132Z,1520536701.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:21.171Z,1520536701.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:21.558Z,1520536701.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:21.574Z,1520536701.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:21.960Z,1520536701.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:21.985Z,1520536701.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:22.358Z,1520536702.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:22.373Z,1520536702.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:22.739Z,1520536702.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:22.765Z,1520536702.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:23.135Z,1520536703.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:23.174Z,1520536703.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:23.533Z,1520536703.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:23.556Z,1520536703.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:23.943Z,1520536703.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:23.970Z,1520536703.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:24.335Z,1520536704.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:24.371Z,1520536704.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:24.762Z,1520536704.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:24.777Z,1520536704.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:25.162Z,1520536705.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:25.178Z,1520536705.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:25.561Z,1520536705.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:25.576Z,1520536705.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:25.937Z,1520536705.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:25.968Z,1520536705.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:26.342Z,1520536706.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:26.374Z,1520536706.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:26.734Z,1520536706.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:26.778Z,1520536706.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:27.132Z,1520536707.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:27.147Z,1520536707.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:27.553Z,1520536707.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:27.580Z,1520536707.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:27.954Z,1520536707.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:27.982Z,1520536707.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:28.349Z,1520536708.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:28.376Z,1520536708.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:28.739Z,1520536708.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:28.775Z,1520536708.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:29.143Z,1520536709.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:29.158Z,1520536709.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:29.534Z,1520536709.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:29.550Z,1520536709.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:29.947Z,1520536709.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:29.984Z,1520536709.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:30.343Z,1520536710.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:30.387Z,1520536710.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:30.753Z,1520536710.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:30.780Z,1520536710.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:31.170Z,1520536711.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:31.185Z,1520536711.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:31.571Z,1520536711.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:31.594Z,1520536711.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:31.934Z,1520536711.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:31.949Z,1520536711.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:32.346Z,1520536712.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:32.382Z,1520536712.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:32.744Z,1520536712.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:32.760Z,1520536712.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:33.134Z,1520536713.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:33.149Z,1520536713.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:33.557Z,1520536713.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:33.584Z,1520536713.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:33.971Z,1520536713.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:33.990Z,1520536713.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:34.349Z,1520536714.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:34.381Z,1520536714.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:34.747Z,1520536714.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:34.787Z,1520536714.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:35.144Z,1520536715.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:35.160Z,1520536715.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:35.540Z,1520536715.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:35.555Z,1520536715.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:35.951Z,1520536715.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:35.991Z,1520536715.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:36.344Z,1520536716.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:36.359Z,1520536716.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:36.757Z,1520536716.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:36.792Z,1520536716.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:37.157Z,1520536717.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:37.188Z,1520536717.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:37.561Z,1520536717.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:37.593Z,1520536717.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:37.939Z,1520536717.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:37.962Z,1520536717.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:38.351Z,1520536718.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:38.370Z,1520536718.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:38.753Z,1520536718.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:38.769Z,1520536718.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:39.140Z,1520536719.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:39.167Z,1520536719.167 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:39.167Z,1520536719.167 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 231
2018-03-08T19:18:39.168Z,1520536719.168 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T19:18:39.173Z,1520536719.173 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:39.174Z,1520536719.174 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 231
2018-03-08T19:18:39.174Z,1520536719.174 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T19:18:39.175Z,1520536719.175 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:39.175Z,1520536719.175 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 231
2018-03-08T19:18:39.175Z,1520536719.175 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T19:18:39.200Z,1520536719.200 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T19:18:39.200Z,1520536719.200 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T19:18:39.205Z,1520536719.205 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T19:18:39.558Z,1520536719.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:39.583Z,1520536719.583 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T19:18:39.583Z,1520536719.583 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 231
2018-03-08T19:18:39.584Z,1520536719.584 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T19:18:39.584Z,1520536719.584 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 231
2018-03-08T19:18:39.585Z,1520536719.585 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T19:18:39.585Z,1520536719.585 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 231
2018-03-08T19:18:39.960Z,1520536719.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:39.983Z,1520536719.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T19:18:39.983Z,1520536719.983 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:18:39.984Z,1520536719.984 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:18:39.984Z,1520536719.984 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T19:18:39.989Z,1520536719.989 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:18:39.989Z,1520536719.989 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:18:39.989Z,1520536719.989 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T19:18:39.990Z,1520536719.990 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:18:39.990Z,1520536719.990 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:18:40.361Z,1520536720.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:40.376Z,1520536720.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T19:18:40.377Z,1520536720.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:40.739Z,1520536720.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:40.770Z,1520536720.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T19:18:40.771Z,1520536720.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:41.139Z,1520536721.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:41.174Z,1520536721.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T19:18:41.175Z,1520536721.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:41.543Z,1520536721.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:41.574Z,1520536721.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T19:18:41.575Z,1520536721.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:41.938Z,1520536721.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:41.974Z,1520536721.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T19:18:41.975Z,1520536721.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:42.343Z,1520536722.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:42.380Z,1520536722.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T19:18:42.381Z,1520536722.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:42.749Z,1520536722.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:42.775Z,1520536722.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T19:18:42.776Z,1520536722.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:43.161Z,1520536723.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:43.179Z,1520536723.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T19:18:43.180Z,1520536723.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:43.561Z,1520536723.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:43.627Z,1520536723.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-03-08T19:18:43.628Z,1520536723.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:43.933Z,1520536723.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:43.948Z,1520536723.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T19:18:43.949Z,1520536723.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:44.339Z,1520536724.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:44.355Z,1520536724.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T19:18:44.356Z,1520536724.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:44.756Z,1520536724.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:44.781Z,1520536724.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T19:18:44.782Z,1520536724.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:45.139Z,1520536725.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:45.158Z,1520536725.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T19:18:45.159Z,1520536725.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:45.571Z,1520536725.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:45.586Z,1520536725.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T19:18:45.587Z,1520536725.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:45.957Z,1520536725.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:45.981Z,1520536725.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T19:18:45.982Z,1520536725.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:46.357Z,1520536726.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:46.382Z,1520536726.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T19:18:46.383Z,1520536726.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:46.745Z,1520536726.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:46.760Z,1520536726.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T19:18:46.761Z,1520536726.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:47.143Z,1520536727.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:47.162Z,1520536727.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T19:18:47.163Z,1520536727.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:47.543Z,1520536727.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:47.562Z,1520536727.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T19:18:47.563Z,1520536727.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:47.941Z,1520536727.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:47.956Z,1520536727.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T19:18:47.957Z,1520536727.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:48.339Z,1520536728.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:48.378Z,1520536728.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T19:18:48.379Z,1520536728.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:48.753Z,1520536728.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:48.786Z,1520536728.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T19:18:48.787Z,1520536728.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:49.154Z,1520536729.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:49.190Z,1520536729.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T19:18:49.191Z,1520536729.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:49.554Z,1520536729.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:49.585Z,1520536729.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T19:18:49.586Z,1520536729.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:49.947Z,1520536729.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:49.966Z,1520536729.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T19:18:49.967Z,1520536729.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:50.348Z,1520536730.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:50.363Z,1520536730.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T19:18:50.364Z,1520536730.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:50.748Z,1520536730.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:50.764Z,1520536730.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T19:18:50.765Z,1520536730.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:51.147Z,1520536731.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:51.164Z,1520536731.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T19:18:51.165Z,1520536731.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:51.549Z,1520536731.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:51.565Z,1520536731.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T19:18:51.566Z,1520536731.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:51.961Z,1520536731.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:51.993Z,1520536731.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T19:18:51.994Z,1520536731.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:52.349Z,1520536732.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:52.364Z,1520536732.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T19:18:52.366Z,1520536732.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:52.746Z,1520536732.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:52.761Z,1520536732.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T19:18:52.761Z,1520536732.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:53.147Z,1520536733.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:53.161Z,1520536733.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T19:18:53.162Z,1520536733.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:53.546Z,1520536733.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:53.561Z,1520536733.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T19:18:53.562Z,1520536733.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:53.946Z,1520536733.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:53.965Z,1520536733.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T19:18:53.966Z,1520536733.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:54.348Z,1520536734.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:54.362Z,1520536734.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T19:18:54.363Z,1520536734.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:54.761Z,1520536734.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:54.792Z,1520536734.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T19:18:54.793Z,1520536734.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:55.153Z,1520536735.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:55.168Z,1520536735.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T19:18:55.169Z,1520536735.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:55.560Z,1520536735.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:55.574Z,1520536735.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T19:18:55.575Z,1520536735.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:55.946Z,1520536735.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:55.962Z,1520536735.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T19:18:55.963Z,1520536735.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:56.346Z,1520536736.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:56.362Z,1520536736.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T19:18:56.363Z,1520536736.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:56.749Z,1520536736.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:56.764Z,1520536736.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T19:18:56.765Z,1520536736.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:57.149Z,1520536737.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:57.164Z,1520536737.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T19:18:57.165Z,1520536737.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:57.550Z,1520536737.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:57.565Z,1520536737.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T19:18:57.566Z,1520536737.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:57.953Z,1520536737.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:57.967Z,1520536737.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T19:18:57.968Z,1520536737.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:58.349Z,1520536738.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:58.365Z,1520536738.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T19:18:58.366Z,1520536738.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:58.747Z,1520536738.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:58.762Z,1520536738.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T19:18:58.763Z,1520536738.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:59.143Z,1520536739.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:59.158Z,1520536739.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T19:18:59.159Z,1520536739.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:59.548Z,1520536739.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:59.564Z,1520536739.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:18:59.946Z,1520536739.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:18:59.962Z,1520536739.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:00.346Z,1520536740.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:00.363Z,1520536740.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:00.763Z,1520536740.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:00.798Z,1520536740.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:01.157Z,1520536741.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:01.173Z,1520536741.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:01.553Z,1520536741.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:01.575Z,1520536741.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:01.950Z,1520536741.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:01.965Z,1520536741.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:02.347Z,1520536742.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:02.362Z,1520536742.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:02.751Z,1520536742.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:02.766Z,1520536742.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:03.147Z,1520536743.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:03.162Z,1520536743.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:03.553Z,1520536743.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:03.569Z,1520536743.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:03.957Z,1520536743.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:03.971Z,1520536743.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:04.356Z,1520536744.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:04.371Z,1520536744.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:04.750Z,1520536744.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:04.766Z,1520536744.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:05.147Z,1520536745.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:05.162Z,1520536745.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:05.552Z,1520536745.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:05.567Z,1520536745.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:05.952Z,1520536745.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:05.967Z,1520536745.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:09.044Z,1520536749.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:09.059Z,1520536749.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:09.182Z,1520536749.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:09.223Z,1520536749.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:09.529Z,1520536749.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:09.554Z,1520536749.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:09.924Z,1520536749.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:09.959Z,1520536749.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:10.315Z,1520536750.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:10.335Z,1520536750.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:10.716Z,1520536750.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:10.731Z,1520536750.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:11.112Z,1520536751.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:11.127Z,1520536751.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:11.529Z,1520536751.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:11.559Z,1520536751.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:11.925Z,1520536751.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:11.940Z,1520536751.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:12.325Z,1520536752.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:12.340Z,1520536752.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:12.712Z,1520536752.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:12.727Z,1520536752.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:13.112Z,1520536753.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:13.128Z,1520536753.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:13.512Z,1520536753.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:13.527Z,1520536753.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:13.913Z,1520536753.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:13.929Z,1520536753.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:14.312Z,1520536754.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:14.327Z,1520536754.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:14.725Z,1520536754.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:14.740Z,1520536754.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:15.121Z,1520536755.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:15.137Z,1520536755.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:15.525Z,1520536755.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:15.541Z,1520536755.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:15.919Z,1520536755.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:15.934Z,1520536755.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:16.318Z,1520536756.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:16.338Z,1520536756.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:16.719Z,1520536756.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:16.735Z,1520536756.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:17.119Z,1520536757.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:17.133Z,1520536757.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:17.525Z,1520536757.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:17.541Z,1520536757.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:17.926Z,1520536757.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:17.941Z,1520536757.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:18.325Z,1520536758.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:18.346Z,1520536758.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:18.717Z,1520536758.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:18.732Z,1520536758.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:19.113Z,1520536759.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:19.132Z,1520536759.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:19.519Z,1520536759.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:19.534Z,1520536759.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:19.919Z,1520536759.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:19.935Z,1520536759.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:20.319Z,1520536760.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:20.334Z,1520536760.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:20.725Z,1520536760.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:20.740Z,1520536760.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:21.121Z,1520536761.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:21.137Z,1520536761.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:21.519Z,1520536761.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:21.535Z,1520536761.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:21.921Z,1520536761.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:21.936Z,1520536761.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:22.320Z,1520536762.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:22.335Z,1520536762.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:22.708Z,1520536762.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:22.743Z,1520536762.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:23.121Z,1520536763.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:23.136Z,1520536763.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:23.520Z,1520536763.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:23.543Z,1520536763.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:23.932Z,1520536763.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:23.947Z,1520536763.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:24.334Z,1520536764.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:24.349Z,1520536764.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:24.720Z,1520536764.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:24.735Z,1520536764.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:25.107Z,1520536765.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:25.135Z,1520536765.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:25.512Z,1520536765.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:25.540Z,1520536765.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:25.912Z,1520536765.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:25.946Z,1520536765.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:26.311Z,1520536766.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:26.346Z,1520536766.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:26.736Z,1520536766.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:26.751Z,1520536766.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:27.126Z,1520536767.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:27.141Z,1520536767.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:27.538Z,1520536767.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:27.558Z,1520536767.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:27.911Z,1520536767.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:27.939Z,1520536767.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:28.311Z,1520536768.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:28.338Z,1520536768.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:28.708Z,1520536768.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:28.734Z,1520536768.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:29.107Z,1520536769.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:29.135Z,1520536769.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:29.525Z,1520536769.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:29.541Z,1520536769.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:29.933Z,1520536769.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:29.948Z,1520536769.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:30.334Z,1520536770.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:30.349Z,1520536770.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:30.711Z,1520536770.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:30.737Z,1520536770.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:31.107Z,1520536771.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:31.133Z,1520536771.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:31.507Z,1520536771.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:31.544Z,1520536771.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:31.912Z,1520536771.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:31.938Z,1520536771.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:32.311Z,1520536772.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:32.338Z,1520536772.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:32.730Z,1520536772.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:32.745Z,1520536772.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:33.126Z,1520536773.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:33.141Z,1520536773.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:33.524Z,1520536773.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:33.544Z,1520536773.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:33.907Z,1520536773.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:33.936Z,1520536773.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:34.312Z,1520536774.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:34.339Z,1520536774.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:34.708Z,1520536774.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:34.751Z,1520536774.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:35.111Z,1520536775.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:35.140Z,1520536775.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:35.513Z,1520536775.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:35.551Z,1520536775.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:35.931Z,1520536775.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:35.952Z,1520536775.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:36.333Z,1520536776.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:36.348Z,1520536776.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:36.711Z,1520536776.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:36.743Z,1520536776.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:37.111Z,1520536777.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:37.149Z,1520536777.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:37.511Z,1520536777.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:37.551Z,1520536777.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:37.908Z,1520536777.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:37.924Z,1520536777.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:38.311Z,1520536778.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:38.347Z,1520536778.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:38.725Z,1520536778.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:38.749Z,1520536778.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:39.117Z,1520536779.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:39.149Z,1520536779.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:39.529Z,1520536779.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:39.553Z,1520536779.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:39.911Z,1520536779.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:39.926Z,1520536779.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:40.308Z,1520536780.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:40.323Z,1520536780.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:40.713Z,1520536780.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:40.728Z,1520536780.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:41.116Z,1520536781.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:41.131Z,1520536781.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:41.513Z,1520536781.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:41.535Z,1520536781.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:41.930Z,1520536781.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:41.953Z,1520536781.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:42.325Z,1520536782.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:42.357Z,1520536782.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:42.729Z,1520536782.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:42.756Z,1520536782.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:43.123Z,1520536783.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:43.146Z,1520536783.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:43.518Z,1520536783.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:43.543Z,1520536783.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:43.918Z,1520536783.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:43.950Z,1520536783.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:44.327Z,1520536784.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:44.346Z,1520536784.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:44.731Z,1520536784.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:44.754Z,1520536784.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:45.126Z,1520536785.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:45.141Z,1520536785.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:45.526Z,1520536785.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:45.547Z,1520536785.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:45.928Z,1520536785.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:45.943Z,1520536785.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:46.304Z,1520536786.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:46.336Z,1520536786.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:46.711Z,1520536786.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:46.747Z,1520536786.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:47.107Z,1520536787.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:47.146Z,1520536787.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:47.517Z,1520536787.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:47.544Z,1520536787.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:47.921Z,1520536787.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:47.956Z,1520536787.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:48.321Z,1520536788.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:48.354Z,1520536788.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:48.711Z,1520536788.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:48.747Z,1520536788.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:49.111Z,1520536789.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:49.146Z,1520536789.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:49.511Z,1520536789.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:49.550Z,1520536789.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:49.906Z,1520536789.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:49.921Z,1520536789.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:50.315Z,1520536790.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:50.346Z,1520536790.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:50.721Z,1520536790.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:50.755Z,1520536790.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:51.117Z,1520536791.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:51.145Z,1520536791.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:51.526Z,1520536791.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:51.556Z,1520536791.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:51.911Z,1520536791.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:51.926Z,1520536791.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:52.315Z,1520536792.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:52.330Z,1520536792.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:52.716Z,1520536792.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:52.732Z,1520536792.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:53.115Z,1520536793.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:53.130Z,1520536793.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:53.513Z,1520536793.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:53.529Z,1520536793.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:53.925Z,1520536793.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:53.940Z,1520536793.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:54.321Z,1520536794.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:54.342Z,1520536794.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:54.716Z,1520536794.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:54.731Z,1520536794.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:55.114Z,1520536795.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:55.131Z,1520536795.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:55.515Z,1520536795.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:55.530Z,1520536795.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:55.915Z,1520536795.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:55.930Z,1520536795.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:56.317Z,1520536796.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:56.332Z,1520536796.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:56.728Z,1520536796.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:56.743Z,1520536796.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:57.116Z,1520536797.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:57.131Z,1520536797.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:57.517Z,1520536797.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:57.533Z,1520536797.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:57.915Z,1520536797.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:57.930Z,1520536797.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:58.318Z,1520536798.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:58.334Z,1520536798.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:58.714Z,1520536798.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:58.733Z,1520536798.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:59.119Z,1520536799.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:59.134Z,1520536799.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:59.517Z,1520536799.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:59.539Z,1520536799.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:19:59.925Z,1520536799.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:19:59.941Z,1520536799.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:00.321Z,1520536800.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:00.336Z,1520536800.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:00.719Z,1520536800.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:00.735Z,1520536800.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:01.116Z,1520536801.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:01.135Z,1520536801.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:01.517Z,1520536801.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:01.538Z,1520536801.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:01.917Z,1520536801.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:01.933Z,1520536801.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:02.314Z,1520536802.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:02.337Z,1520536802.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:02.725Z,1520536802.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:02.740Z,1520536802.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:03.126Z,1520536803.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:03.141Z,1520536803.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:03.538Z,1520536803.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:03.558Z,1520536803.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:03.911Z,1520536803.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:03.940Z,1520536803.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:04.304Z,1520536804.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:04.339Z,1520536804.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:04.708Z,1520536804.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:04.734Z,1520536804.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:05.107Z,1520536805.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:05.135Z,1520536805.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:05.526Z,1520536805.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:05.542Z,1520536805.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:05.933Z,1520536805.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:05.949Z,1520536805.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:06.333Z,1520536806.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:06.349Z,1520536806.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:09.442Z,1520536809.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:09.479Z,1520536809.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:09.564Z,1520536809.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:09.607Z,1520536809.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:09.973Z,1520536809.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:09.989Z,1520536809.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:10.361Z,1520536810.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:10.383Z,1520536810.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:10.769Z,1520536810.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:10.785Z,1520536810.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:11.143Z,1520536811.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:11.158Z,1520536811.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:11.544Z,1520536811.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:11.560Z,1520536811.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:11.951Z,1520536811.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:11.968Z,1520536811.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:12.351Z,1520536812.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:12.366Z,1520536812.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:12.753Z,1520536812.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:12.791Z,1520536812.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:13.165Z,1520536813.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:13.188Z,1520536813.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:13.560Z,1520536813.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:13.594Z,1520536813.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:13.948Z,1520536813.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:13.963Z,1520536813.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:14.351Z,1520536814.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:14.366Z,1520536814.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:14.752Z,1520536814.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:14.767Z,1520536814.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:15.148Z,1520536815.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:15.163Z,1520536815.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:15.565Z,1520536815.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:15.588Z,1520536815.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:15.961Z,1520536815.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:15.989Z,1520536815.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:16.366Z,1520536816.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:16.389Z,1520536816.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:16.752Z,1520536816.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:16.768Z,1520536816.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:17.152Z,1520536817.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:17.167Z,1520536817.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:17.545Z,1520536817.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:17.567Z,1520536817.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:17.950Z,1520536817.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:17.971Z,1520536817.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:18.350Z,1520536818.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:18.365Z,1520536818.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:18.765Z,1520536818.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:18.798Z,1520536818.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:19.161Z,1520536819.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:19.176Z,1520536819.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:19.565Z,1520536819.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:19.601Z,1520536819.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:19.944Z,1520536819.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:19.973Z,1520536819.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:20.352Z,1520536820.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:20.367Z,1520536820.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:20.752Z,1520536820.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:20.767Z,1520536820.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:21.144Z,1520536821.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:21.174Z,1520536821.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:21.554Z,1520536821.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:21.569Z,1520536821.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:21.957Z,1520536821.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:21.972Z,1520536821.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:22.353Z,1520536822.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:22.369Z,1520536822.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:22.750Z,1520536822.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:22.765Z,1520536822.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:23.151Z,1520536823.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:23.166Z,1520536823.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:23.544Z,1520536823.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:23.577Z,1520536823.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:23.955Z,1520536823.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:23.974Z,1520536823.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:24.353Z,1520536824.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:24.368Z,1520536824.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:24.757Z,1520536824.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:24.773Z,1520536824.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:25.157Z,1520536825.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:25.172Z,1520536825.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:25.557Z,1520536825.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:25.578Z,1520536825.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:25.943Z,1520536825.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:25.970Z,1520536825.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:26.353Z,1520536826.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:26.369Z,1520536826.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:26.751Z,1520536826.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:26.771Z,1520536826.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:27.144Z,1520536827.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:27.167Z,1520536827.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:27.564Z,1520536827.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:27.580Z,1520536827.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:27.964Z,1520536827.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:27.986Z,1520536827.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:28.358Z,1520536828.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:28.373Z,1520536828.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:28.754Z,1520536828.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:28.775Z,1520536828.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:29.157Z,1520536829.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:29.172Z,1520536829.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:29.540Z,1520536829.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:29.571Z,1520536829.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:29.955Z,1520536829.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:29.978Z,1520536829.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:30.356Z,1520536830.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:30.372Z,1520536830.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:30.765Z,1520536830.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:30.780Z,1520536830.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:31.168Z,1520536831.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:31.183Z,1520536831.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:31.566Z,1520536831.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:31.581Z,1520536831.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:31.940Z,1520536831.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:31.975Z,1520536831.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:32.353Z,1520536832.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:32.373Z,1520536832.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:32.744Z,1520536832.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:32.783Z,1520536832.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:33.137Z,1520536833.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:33.165Z,1520536833.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:33.561Z,1520536833.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:33.577Z,1520536833.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:33.974Z,1520536833.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:33.995Z,1520536833.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:34.361Z,1520536834.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:34.376Z,1520536834.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:34.743Z,1520536834.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:34.774Z,1520536834.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:35.143Z,1520536835.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:35.175Z,1520536835.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:35.540Z,1520536835.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:35.555Z,1520536835.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:35.948Z,1520536835.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:35.979Z,1520536835.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:36.347Z,1520536836.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:36.383Z,1520536836.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:36.761Z,1520536836.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:36.786Z,1520536836.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:37.165Z,1520536837.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:37.194Z,1520536837.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:37.565Z,1520536837.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:37.599Z,1520536837.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:37.951Z,1520536837.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:37.967Z,1520536837.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:38.351Z,1520536838.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:38.370Z,1520536838.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:38.753Z,1520536838.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:38.769Z,1520536838.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:39.151Z,1520536839.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:39.167Z,1520536839.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:39.561Z,1520536839.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:39.576Z,1520536839.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:39.957Z,1520536839.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:39.973Z,1520536839.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:40.365Z,1520536840.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:40.396Z,1520536840.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:40.756Z,1520536840.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:40.772Z,1520536840.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:41.147Z,1520536841.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:41.175Z,1520536841.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:41.555Z,1520536841.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:41.571Z,1520536841.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:41.956Z,1520536841.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:41.971Z,1520536841.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:42.352Z,1520536842.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:42.367Z,1520536842.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:42.761Z,1520536842.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:42.777Z,1520536842.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:43.161Z,1520536843.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:43.176Z,1520536843.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:43.561Z,1520536843.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:43.577Z,1520536843.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:43.949Z,1520536843.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:43.970Z,1520536843.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:44.356Z,1520536844.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:44.371Z,1520536844.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:44.758Z,1520536844.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:44.773Z,1520536844.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:45.156Z,1520536845.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:45.171Z,1520536845.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:45.563Z,1520536845.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:45.603Z,1520536845.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:45.961Z,1520536845.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:45.977Z,1520536845.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:46.361Z,1520536846.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:46.377Z,1520536846.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:46.755Z,1520536846.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:46.771Z,1520536846.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:47.151Z,1520536847.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:47.167Z,1520536847.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:47.551Z,1520536847.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:47.617Z,1520536847.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:47.943Z,1520536847.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:47.970Z,1520536847.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:48.342Z,1520536848.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:48.377Z,1520536848.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:48.761Z,1520536848.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:48.779Z,1520536848.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:49.167Z,1520536849.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:49.188Z,1520536849.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:49.566Z,1520536849.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:49.583Z,1520536849.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:49.943Z,1520536849.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:49.978Z,1520536849.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:50.346Z,1520536850.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:50.379Z,1520536850.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:50.743Z,1520536850.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:50.781Z,1520536850.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:51.143Z,1520536851.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:51.179Z,1520536851.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:51.566Z,1520536851.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:51.581Z,1520536851.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:51.953Z,1520536851.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:51.988Z,1520536851.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:52.371Z,1520536852.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:52.387Z,1520536852.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:52.751Z,1520536852.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:52.779Z,1520536852.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:53.143Z,1520536853.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:53.182Z,1520536853.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:53.544Z,1520536853.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:53.571Z,1520536853.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:53.948Z,1520536853.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:53.983Z,1520536853.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:54.343Z,1520536854.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:54.388Z,1520536854.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:54.770Z,1520536854.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:54.786Z,1520536854.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:55.158Z,1520536855.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:55.185Z,1520536855.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:55.557Z,1520536855.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:55.590Z,1520536855.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:55.947Z,1520536855.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:55.982Z,1520536855.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:56.347Z,1520536856.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:56.387Z,1520536856.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:56.747Z,1520536856.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:56.762Z,1520536856.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:57.144Z,1520536857.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:57.159Z,1520536857.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:57.565Z,1520536857.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:57.590Z,1520536857.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:57.961Z,1520536857.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:57.993Z,1520536857.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:58.361Z,1520536858.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:58.397Z,1520536858.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:58.752Z,1520536858.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:58.767Z,1520536858.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:59.150Z,1520536859.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:59.166Z,1520536859.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:59.548Z,1520536859.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:59.563Z,1520536859.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:20:59.953Z,1520536859.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:20:59.969Z,1520536859.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:00.352Z,1520536860.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:00.367Z,1520536860.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:00.765Z,1520536860.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:00.796Z,1520536860.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:01.157Z,1520536861.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:01.172Z,1520536861.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:01.564Z,1520536861.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:01.598Z,1520536861.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:01.949Z,1520536861.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:01.964Z,1520536861.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:02.352Z,1520536862.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:02.367Z,1520536862.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:02.753Z,1520536862.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:02.768Z,1520536862.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:03.152Z,1520536863.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:03.167Z,1520536863.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:03.565Z,1520536863.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:03.596Z,1520536863.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:03.957Z,1520536863.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:03.972Z,1520536863.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:04.365Z,1520536864.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:04.380Z,1520536864.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:04.753Z,1520536864.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:04.769Z,1520536864.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:05.151Z,1520536865.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:05.166Z,1520536865.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:05.554Z,1520536865.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:05.575Z,1520536865.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:05.955Z,1520536865.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:05.970Z,1520536865.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:06.355Z,1520536866.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:06.370Z,1520536866.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:06.761Z,1520536866.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:06.777Z,1520536866.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:07.157Z,1520536867.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:07.172Z,1520536867.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:10.274Z,1520536870.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:10.305Z,1520536870.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:10.393Z,1520536870.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:10.426Z,1520536870.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:10.759Z,1520536870.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:10.779Z,1520536870.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:11.160Z,1520536871.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:11.175Z,1520536871.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:11.565Z,1520536871.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:11.581Z,1520536871.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:11.960Z,1520536871.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:11.975Z,1520536871.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:12.373Z,1520536872.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:12.388Z,1520536872.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:12.769Z,1520536872.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:12.784Z,1520536872.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:13.165Z,1520536873.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:13.181Z,1520536873.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:13.564Z,1520536873.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:13.579Z,1520536873.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:13.963Z,1520536873.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:13.979Z,1520536873.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:14.363Z,1520536874.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:14.378Z,1520536874.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:14.765Z,1520536874.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:14.780Z,1520536874.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:15.169Z,1520536875.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:15.184Z,1520536875.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:15.566Z,1520536875.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:15.581Z,1520536875.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:15.962Z,1520536875.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:15.977Z,1520536875.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:16.363Z,1520536876.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:16.378Z,1520536876.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:16.756Z,1520536876.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:16.780Z,1520536876.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:17.163Z,1520536877.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:17.178Z,1520536877.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:17.573Z,1520536877.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:17.594Z,1520536877.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:17.976Z,1520536877.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:17.991Z,1520536877.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:18.377Z,1520536878.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:18.398Z,1520536878.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:18.752Z,1520536878.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:18.777Z,1520536878.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:19.151Z,1520536879.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:19.187Z,1520536879.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:19.555Z,1520536879.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:19.582Z,1520536879.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:19.956Z,1520536879.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:19.982Z,1520536879.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:20.351Z,1520536880.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:20.387Z,1520536880.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:20.771Z,1520536880.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:20.793Z,1520536880.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:21.170Z,1520536881.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:21.190Z,1520536881.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:21.574Z,1520536881.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:21.589Z,1520536881.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:21.952Z,1520536881.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:21.989Z,1520536881.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:22.355Z,1520536882.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:22.390Z,1520536882.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:22.752Z,1520536882.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:22.779Z,1520536882.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:23.155Z,1520536883.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:23.200Z,1520536883.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:23.561Z,1520536883.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:23.594Z,1520536883.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:23.974Z,1520536883.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:23.995Z,1520536883.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:24.375Z,1520536884.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:24.391Z,1520536884.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:24.755Z,1520536884.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:24.782Z,1520536884.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:25.152Z,1520536885.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:25.179Z,1520536885.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:25.547Z,1520536885.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:25.581Z,1520536885.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:25.946Z,1520536885.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:25.969Z,1520536885.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:26.355Z,1520536886.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:26.382Z,1520536886.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:26.774Z,1520536886.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:26.790Z,1520536886.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:27.169Z,1520536887.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:27.185Z,1520536887.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:27.569Z,1520536887.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:27.584Z,1520536887.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:27.952Z,1520536887.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:27.984Z,1520536887.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:28.355Z,1520536888.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:28.381Z,1520536888.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:28.756Z,1520536888.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:28.782Z,1520536888.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:29.155Z,1520536889.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:29.197Z,1520536889.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:29.557Z,1520536889.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:29.584Z,1520536889.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:29.969Z,1520536889.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:29.992Z,1520536889.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:30.374Z,1520536890.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:30.389Z,1520536890.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:30.747Z,1520536890.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:30.783Z,1520536890.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:31.155Z,1520536891.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:31.182Z,1520536891.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:31.551Z,1520536891.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:31.584Z,1520536891.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:31.946Z,1520536891.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:31.969Z,1520536891.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:32.355Z,1520536892.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:32.387Z,1520536892.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:32.782Z,1520536892.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:32.802Z,1520536892.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:33.157Z,1520536893.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:33.184Z,1520536893.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:33.561Z,1520536893.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:33.596Z,1520536893.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:33.955Z,1520536893.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:33.987Z,1520536893.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:34.348Z,1520536894.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:34.364Z,1520536894.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:34.751Z,1520536894.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:34.787Z,1520536894.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:35.159Z,1520536895.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:35.196Z,1520536895.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:35.561Z,1520536895.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:35.593Z,1520536895.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:35.973Z,1520536895.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:35.997Z,1520536895.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:36.369Z,1520536896.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:36.403Z,1520536896.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:36.751Z,1520536896.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:36.771Z,1520536896.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:37.159Z,1520536897.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:37.178Z,1520536897.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:37.557Z,1520536897.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:37.572Z,1520536897.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:37.956Z,1520536897.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:37.972Z,1520536897.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:38.360Z,1520536898.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:38.382Z,1520536898.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:38.761Z,1520536898.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:38.776Z,1520536898.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:39.158Z,1520536899.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:39.181Z,1520536899.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:39.566Z,1520536899.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:39.586Z,1520536899.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:39.962Z,1520536899.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:39.977Z,1520536899.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:40.363Z,1520536900.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:40.378Z,1520536900.378 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:40.379Z,1520536900.379 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 232
2018-03-08T19:21:40.379Z,1520536900.379 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T19:21:40.381Z,1520536900.381 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:40.381Z,1520536900.381 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 232
2018-03-08T19:21:40.381Z,1520536900.381 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T19:21:40.382Z,1520536900.382 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:40.383Z,1520536900.383 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 232
2018-03-08T19:21:40.383Z,1520536900.383 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T19:21:40.407Z,1520536900.407 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T19:21:40.407Z,1520536900.407 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T19:21:40.407Z,1520536900.407 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T19:21:40.759Z,1520536900.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:40.785Z,1520536900.785 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T19:21:40.785Z,1520536900.785 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 232
2018-03-08T19:21:40.785Z,1520536900.785 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T19:21:40.786Z,1520536900.786 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 232
2018-03-08T19:21:40.786Z,1520536900.786 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T19:21:40.786Z,1520536900.786 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 232
2018-03-08T19:21:41.150Z,1520536901.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:41.185Z,1520536901.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T19:21:41.185Z,1520536901.185 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:21:41.186Z,1520536901.186 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:21:41.186Z,1520536901.186 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T19:21:41.186Z,1520536901.186 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:21:41.187Z,1520536901.187 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:21:41.187Z,1520536901.187 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T19:21:41.188Z,1520536901.188 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:21:41.188Z,1520536901.188 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:21:41.561Z,1520536901.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:41.588Z,1520536901.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T19:21:41.593Z,1520536901.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:41.977Z,1520536901.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:41.992Z,1520536901.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T19:21:41.993Z,1520536901.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:42.403Z,1520536902.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:42.476Z,1520536902.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-03-08T19:21:42.477Z,1520536902.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:42.751Z,1520536902.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:42.782Z,1520536902.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T19:21:42.783Z,1520536902.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:43.155Z,1520536903.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:43.181Z,1520536903.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T19:21:43.181Z,1520536903.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:43.551Z,1520536903.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:43.586Z,1520536903.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T19:21:43.586Z,1520536903.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:43.946Z,1520536903.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:43.969Z,1520536903.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T19:21:43.970Z,1520536903.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:44.351Z,1520536904.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:44.382Z,1520536904.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T19:21:44.383Z,1520536904.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:44.764Z,1520536904.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:44.791Z,1520536904.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T19:21:44.792Z,1520536904.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:45.161Z,1520536905.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:45.187Z,1520536905.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T19:21:45.188Z,1520536905.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:45.561Z,1520536905.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:45.587Z,1520536905.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T19:21:45.588Z,1520536905.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:45.951Z,1520536905.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:45.965Z,1520536905.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T19:21:45.966Z,1520536905.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:46.356Z,1520536906.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:46.372Z,1520536906.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T19:21:46.381Z,1520536906.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:46.760Z,1520536906.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:46.774Z,1520536906.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T19:21:46.775Z,1520536906.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:47.159Z,1520536907.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:47.173Z,1520536907.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T19:21:47.174Z,1520536907.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:47.557Z,1520536907.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:47.573Z,1520536907.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T19:21:47.574Z,1520536907.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:47.969Z,1520536907.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:47.984Z,1520536907.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T19:21:47.997Z,1520536907.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:48.372Z,1520536908.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:48.386Z,1520536908.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T19:21:48.387Z,1520536908.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:48.756Z,1520536908.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:48.771Z,1520536908.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T19:21:48.772Z,1520536908.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:49.159Z,1520536909.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:49.174Z,1520536909.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T19:21:49.175Z,1520536909.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:49.558Z,1520536909.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:49.583Z,1520536909.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T19:21:49.584Z,1520536909.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:49.958Z,1520536909.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:49.973Z,1520536909.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T19:21:49.974Z,1520536909.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:50.360Z,1520536910.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:50.375Z,1520536910.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T19:21:50.376Z,1520536910.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:50.765Z,1520536910.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:50.780Z,1520536910.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T19:21:50.781Z,1520536910.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:51.161Z,1520536911.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:51.177Z,1520536911.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T19:21:51.178Z,1520536911.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:51.561Z,1520536911.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:51.576Z,1520536911.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T19:21:51.577Z,1520536911.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:51.960Z,1520536911.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:51.975Z,1520536911.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T19:21:51.975Z,1520536911.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:52.360Z,1520536912.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:52.375Z,1520536912.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T19:21:52.376Z,1520536912.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:52.760Z,1520536912.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:52.775Z,1520536912.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T19:21:52.776Z,1520536912.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:53.159Z,1520536913.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:53.174Z,1520536913.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T19:21:53.175Z,1520536913.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:53.560Z,1520536913.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:53.575Z,1520536913.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T19:21:53.576Z,1520536913.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:53.973Z,1520536913.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:53.988Z,1520536913.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T19:21:54.005Z,1520536914.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:54.365Z,1520536914.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:54.386Z,1520536914.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T19:21:54.387Z,1520536914.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:54.756Z,1520536914.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:54.771Z,1520536914.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T19:21:54.772Z,1520536914.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:55.159Z,1520536915.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:55.174Z,1520536915.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T19:21:55.175Z,1520536915.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:55.563Z,1520536915.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:55.578Z,1520536915.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T19:21:55.579Z,1520536915.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:55.958Z,1520536915.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:55.973Z,1520536915.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T19:21:55.974Z,1520536915.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:56.362Z,1520536916.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:56.377Z,1520536916.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T19:21:56.378Z,1520536916.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:56.765Z,1520536916.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:56.786Z,1520536916.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T19:21:56.787Z,1520536916.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:57.168Z,1520536917.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:57.215Z,1520536917.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T19:21:57.216Z,1520536917.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:57.564Z,1520536917.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:57.579Z,1520536917.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T19:21:57.580Z,1520536917.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:57.960Z,1520536917.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:57.982Z,1520536917.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T19:21:57.983Z,1520536917.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:58.030Z,1520536918.030 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T19:21:58.362Z,1520536918.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:58.382Z,1520536918.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T19:21:58.383Z,1520536918.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:58.763Z,1520536918.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:58.782Z,1520536918.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T19:21:58.783Z,1520536918.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:59.163Z,1520536919.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:59.184Z,1520536919.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T19:21:59.185Z,1520536919.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:59.566Z,1520536919.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:59.585Z,1520536919.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T19:21:59.586Z,1520536919.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:21:59.972Z,1520536919.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:21:59.987Z,1520536919.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T19:21:59.988Z,1520536919.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:00.373Z,1520536920.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:00.388Z,1520536920.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:00.764Z,1520536920.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:00.787Z,1520536920.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:01.164Z,1520536921.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:01.186Z,1520536921.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:01.569Z,1520536921.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:01.590Z,1520536921.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:01.945Z,1520536921.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:01.978Z,1520536921.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:02.351Z,1520536922.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:02.378Z,1520536922.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:02.770Z,1520536922.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:02.790Z,1520536922.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:03.165Z,1520536923.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:03.182Z,1520536923.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:03.565Z,1520536923.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:03.593Z,1520536923.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:03.955Z,1520536923.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:03.983Z,1520536923.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:04.355Z,1520536924.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:04.382Z,1520536924.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:04.751Z,1520536924.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:04.778Z,1520536924.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:05.151Z,1520536925.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:05.181Z,1520536925.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:05.565Z,1520536925.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:05.589Z,1520536925.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:05.592Z,1520536925.592 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T19:22:05.592Z,1520536925.592 [Default:CheckIn:C.Wait] Stopped
2018-03-08T19:22:05.592Z,1520536925.592 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T19:22:05.592Z,1520536925.592 [Default:CheckIn:D] Running Loop=1
2018-03-08T19:22:05.973Z,1520536925.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:05.988Z,1520536925.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:05.991Z,1520536925.991 [Default:CheckIn:D] Stopped
2018-03-08T19:22:05.992Z,1520536925.992 [Default:CheckIn:E] Running Loop=1
2018-03-08T19:22:06.374Z,1520536926.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:06.389Z,1520536926.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:06.392Z,1520536926.392 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 696.353125 min 
2018-03-08T19:22:06.392Z,1520536926.392 [Default:CheckIn:E] Stopped
2018-03-08T19:22:06.393Z,1520536926.393 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T19:22:06.393Z,1520536926.393 [Default:CheckIn] Stopped
2018-03-08T19:22:06.393Z,1520536926.393 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T19:22:06.393Z,1520536926.393 [Default:CheckIn](INFO): Running loop #68
2018-03-08T19:22:06.393Z,1520536926.393 [Default:CheckIn] Running Loop=68
2018-03-08T19:22:06.393Z,1520536926.393 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T19:22:06.393Z,1520536926.393 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T19:22:09.455Z,1520536929.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:09.478Z,1520536929.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:09.579Z,1520536929.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:09.611Z,1520536929.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:09.950Z,1520536929.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:09.980Z,1520536929.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:10.336Z,1520536930.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:10.352Z,1520536930.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:10.749Z,1520536930.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:10.779Z,1520536930.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:11.141Z,1520536931.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:11.156Z,1520536931.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:11.535Z,1520536931.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:11.551Z,1520536931.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:11.936Z,1520536931.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:11.952Z,1520536931.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:12.331Z,1520536932.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:12.346Z,1520536932.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:12.741Z,1520536932.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:12.756Z,1520536932.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:13.136Z,1520536933.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:13.153Z,1520536933.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:13.540Z,1520536933.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:13.562Z,1520536933.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:13.930Z,1520536933.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:13.945Z,1520536933.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:14.335Z,1520536934.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:14.350Z,1520536934.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:14.731Z,1520536934.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:14.747Z,1520536934.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:15.131Z,1520536935.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:15.154Z,1520536935.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:15.541Z,1520536935.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:15.557Z,1520536935.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:15.941Z,1520536935.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:15.956Z,1520536935.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:16.340Z,1520536936.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:16.356Z,1520536936.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:16.735Z,1520536936.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:16.751Z,1520536936.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:17.135Z,1520536937.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:17.155Z,1520536937.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:17.531Z,1520536937.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:17.551Z,1520536937.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:17.937Z,1520536937.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:17.952Z,1520536937.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:18.331Z,1520536938.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:18.351Z,1520536938.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:18.745Z,1520536938.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:18.760Z,1520536938.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:19.141Z,1520536939.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:19.163Z,1520536939.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:19.544Z,1520536939.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:19.566Z,1520536939.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:19.935Z,1520536939.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:19.951Z,1520536939.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:20.335Z,1520536940.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:20.355Z,1520536940.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:20.732Z,1520536940.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:20.747Z,1520536940.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:21.119Z,1520536941.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:21.154Z,1520536941.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:21.540Z,1520536941.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:21.556Z,1520536941.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:21.944Z,1520536941.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:21.967Z,1520536941.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:22.345Z,1520536942.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:22.366Z,1520536942.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:22.720Z,1520536942.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:22.751Z,1520536942.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:23.131Z,1520536943.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:23.151Z,1520536943.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:23.532Z,1520536943.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:23.547Z,1520536943.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:23.919Z,1520536943.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:23.951Z,1520536943.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:24.331Z,1520536944.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:24.351Z,1520536944.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:24.742Z,1520536944.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:24.762Z,1520536944.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:25.136Z,1520536945.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:25.159Z,1520536945.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:25.545Z,1520536945.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:25.566Z,1520536945.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:25.935Z,1520536945.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:25.951Z,1520536945.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:26.320Z,1520536946.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:26.355Z,1520536946.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:26.723Z,1520536946.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:26.751Z,1520536946.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:27.127Z,1520536947.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:27.167Z,1520536947.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:27.533Z,1520536947.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:27.561Z,1520536947.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:27.937Z,1520536947.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:27.975Z,1520536947.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:28.341Z,1520536948.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:28.367Z,1520536948.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:28.723Z,1520536948.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:28.739Z,1520536948.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:29.128Z,1520536949.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:29.143Z,1520536949.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:29.531Z,1520536949.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:29.547Z,1520536949.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:29.921Z,1520536949.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:29.937Z,1520536949.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:30.330Z,1520536950.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:30.346Z,1520536950.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:30.741Z,1520536950.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:30.785Z,1520536950.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:31.133Z,1520536951.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:31.149Z,1520536951.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:31.546Z,1520536951.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:31.576Z,1520536951.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:31.931Z,1520536951.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:31.946Z,1520536951.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:32.333Z,1520536952.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:32.348Z,1520536952.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:32.733Z,1520536952.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:32.748Z,1520536952.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:33.132Z,1520536953.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:33.147Z,1520536953.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:33.533Z,1520536953.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:33.549Z,1520536953.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:33.937Z,1520536953.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:33.952Z,1520536953.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:34.345Z,1520536954.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:34.376Z,1520536954.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:34.733Z,1520536954.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:34.748Z,1520536954.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:35.130Z,1520536955.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:35.149Z,1520536955.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:35.532Z,1520536955.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:35.547Z,1520536955.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:35.934Z,1520536955.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:35.949Z,1520536955.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:36.331Z,1520536956.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:36.347Z,1520536956.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:36.745Z,1520536956.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:36.777Z,1520536956.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:37.135Z,1520536957.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:37.151Z,1520536957.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:37.545Z,1520536957.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:37.576Z,1520536957.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:37.931Z,1520536957.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:37.946Z,1520536957.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:38.332Z,1520536958.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:38.348Z,1520536958.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:38.733Z,1520536958.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:38.748Z,1520536958.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:39.132Z,1520536959.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:39.147Z,1520536959.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:39.532Z,1520536959.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:39.555Z,1520536959.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:39.945Z,1520536959.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:39.981Z,1520536959.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:40.337Z,1520536960.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:40.358Z,1520536960.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:40.728Z,1520536960.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:40.743Z,1520536960.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:41.131Z,1520536961.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:41.147Z,1520536961.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:41.534Z,1520536961.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:41.554Z,1520536961.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:41.931Z,1520536961.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:41.946Z,1520536961.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:42.334Z,1520536962.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:42.349Z,1520536962.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:42.737Z,1520536962.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:42.752Z,1520536962.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:43.136Z,1520536963.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:43.151Z,1520536963.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:43.536Z,1520536963.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:43.551Z,1520536963.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:43.936Z,1520536963.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:43.951Z,1520536963.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:44.334Z,1520536964.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:44.355Z,1520536964.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:44.733Z,1520536964.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:44.748Z,1520536964.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:45.133Z,1520536965.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:45.147Z,1520536965.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:45.534Z,1520536965.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:45.558Z,1520536965.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:45.940Z,1520536965.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:45.962Z,1520536965.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:46.341Z,1520536966.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:46.362Z,1520536966.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:46.731Z,1520536966.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:46.746Z,1520536966.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:47.131Z,1520536967.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:47.155Z,1520536967.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:47.535Z,1520536967.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:47.551Z,1520536967.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:47.935Z,1520536967.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:47.951Z,1520536967.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:48.331Z,1520536968.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:48.346Z,1520536968.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:48.741Z,1520536968.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:48.757Z,1520536968.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:49.140Z,1520536969.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:49.156Z,1520536969.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:49.540Z,1520536969.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:49.555Z,1520536969.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:49.931Z,1520536969.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:49.946Z,1520536969.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:50.335Z,1520536970.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:50.354Z,1520536970.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:50.735Z,1520536970.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:50.751Z,1520536970.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:51.135Z,1520536971.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:51.150Z,1520536971.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:51.541Z,1520536971.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:51.556Z,1520536971.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:51.941Z,1520536971.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:51.956Z,1520536971.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:52.341Z,1520536972.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:52.355Z,1520536972.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:52.735Z,1520536972.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:52.754Z,1520536972.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:53.134Z,1520536973.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:53.150Z,1520536973.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:53.537Z,1520536973.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:53.552Z,1520536973.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:53.935Z,1520536973.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:53.950Z,1520536973.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:54.331Z,1520536974.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:54.346Z,1520536974.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:54.741Z,1520536974.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:54.756Z,1520536974.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:55.140Z,1520536975.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:55.155Z,1520536975.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:55.550Z,1520536975.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:55.566Z,1520536975.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:55.936Z,1520536975.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:55.951Z,1520536975.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:56.335Z,1520536976.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:56.358Z,1520536976.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:56.731Z,1520536976.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:56.747Z,1520536976.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:57.129Z,1520536977.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:57.151Z,1520536977.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:57.540Z,1520536977.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:57.556Z,1520536977.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:57.944Z,1520536977.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:57.967Z,1520536977.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:58.345Z,1520536978.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:58.360Z,1520536978.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:58.735Z,1520536978.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:58.754Z,1520536978.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:59.135Z,1520536979.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:59.154Z,1520536979.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:59.529Z,1520536979.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:59.551Z,1520536979.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:22:59.936Z,1520536979.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:22:59.951Z,1520536979.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:00.330Z,1520536980.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:00.354Z,1520536980.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:00.745Z,1520536980.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:00.761Z,1520536980.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:01.140Z,1520536981.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:01.156Z,1520536981.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:01.548Z,1520536981.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:01.571Z,1520536981.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:01.936Z,1520536981.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:01.951Z,1520536981.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:02.323Z,1520536982.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:02.355Z,1520536982.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:02.723Z,1520536982.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:02.758Z,1520536982.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:03.124Z,1520536983.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:03.151Z,1520536983.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:03.541Z,1520536983.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:03.557Z,1520536983.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:03.945Z,1520536983.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:03.967Z,1520536983.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:04.345Z,1520536984.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:04.361Z,1520536984.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:04.723Z,1520536984.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:04.749Z,1520536984.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:05.123Z,1520536985.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:05.155Z,1520536985.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:05.523Z,1520536985.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:05.555Z,1520536985.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:05.927Z,1520536985.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:05.954Z,1520536985.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:06.322Z,1520536986.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:06.349Z,1520536986.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:06.746Z,1520536986.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:06.762Z,1520536986.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:09.863Z,1520536989.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:09.896Z,1520536989.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:10.001Z,1520536990.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:10.041Z,1520536990.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:10.356Z,1520536990.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:10.371Z,1520536990.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:10.752Z,1520536990.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:10.768Z,1520536990.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:11.155Z,1520536991.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:11.171Z,1520536991.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:11.565Z,1520536991.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:11.597Z,1520536991.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:11.971Z,1520536991.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:12.040Z,1520536992.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:12.353Z,1520536992.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:12.368Z,1520536992.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:12.753Z,1520536992.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:12.768Z,1520536992.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:13.152Z,1520536993.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:13.168Z,1520536993.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:13.553Z,1520536993.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:13.569Z,1520536993.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:13.953Z,1520536993.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:13.968Z,1520536993.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:14.366Z,1520536994.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:14.396Z,1520536994.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:14.756Z,1520536994.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:14.771Z,1520536994.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:15.157Z,1520536995.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:15.173Z,1520536995.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:15.551Z,1520536995.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:15.571Z,1520536995.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:15.940Z,1520536995.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:15.976Z,1520536995.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:16.346Z,1520536996.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:16.374Z,1520536996.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:16.766Z,1520536996.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:16.782Z,1520536996.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:17.166Z,1520536997.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:17.181Z,1520536997.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:17.561Z,1520536997.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:17.594Z,1520536997.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:17.947Z,1520536997.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:17.975Z,1520536997.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:18.338Z,1520536998.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:18.370Z,1520536998.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:18.748Z,1520536998.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:18.778Z,1520536998.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:19.143Z,1520536999.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:19.180Z,1520536999.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:19.553Z,1520536999.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:19.582Z,1520536999.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:19.968Z,1520536999.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:19.990Z,1520536999.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:20.365Z,1520537000.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:20.386Z,1520537000.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:20.742Z,1520537000.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:20.775Z,1520537000.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:21.150Z,1520537001.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:21.185Z,1520537001.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:21.551Z,1520537001.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:21.591Z,1520537001.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:21.951Z,1520537001.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:21.967Z,1520537001.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:22.352Z,1520537002.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:22.367Z,1520537002.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:22.761Z,1520537002.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:22.797Z,1520537002.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:23.165Z,1520537003.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:23.195Z,1520537003.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:23.561Z,1520537003.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:23.592Z,1520537003.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:23.952Z,1520537003.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:23.968Z,1520537003.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:24.349Z,1520537004.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:24.364Z,1520537004.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:24.752Z,1520537004.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:24.767Z,1520537004.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:25.148Z,1520537005.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:25.164Z,1520537005.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:25.565Z,1520537005.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:25.596Z,1520537005.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:25.961Z,1520537005.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:25.995Z,1520537005.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:26.350Z,1520537006.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:26.366Z,1520537006.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:26.749Z,1520537006.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:26.766Z,1520537006.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:27.147Z,1520537007.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:27.171Z,1520537007.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:27.551Z,1520537007.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:27.568Z,1520537007.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:27.947Z,1520537007.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:27.962Z,1520537007.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:28.352Z,1520537008.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:28.367Z,1520537008.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:28.765Z,1520537008.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:28.801Z,1520537008.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:29.161Z,1520537009.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:29.176Z,1520537009.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:29.561Z,1520537009.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:29.583Z,1520537009.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:29.948Z,1520537009.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:29.964Z,1520537009.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:30.346Z,1520537010.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:30.362Z,1520537010.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:30.752Z,1520537010.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:30.770Z,1520537010.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:31.154Z,1520537011.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:31.170Z,1520537011.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:31.556Z,1520537011.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:31.571Z,1520537011.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:31.961Z,1520537011.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:31.982Z,1520537011.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:32.356Z,1520537012.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:32.373Z,1520537012.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:32.746Z,1520537012.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:32.762Z,1520537012.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:33.156Z,1520537013.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:33.171Z,1520537013.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:33.554Z,1520537013.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:33.569Z,1520537013.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:33.951Z,1520537013.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:33.967Z,1520537013.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:34.354Z,1520537014.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:34.369Z,1520537014.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:34.757Z,1520537014.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:34.773Z,1520537014.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:35.160Z,1520537015.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:35.175Z,1520537015.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:35.557Z,1520537015.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:35.578Z,1520537015.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:35.954Z,1520537015.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:35.971Z,1520537015.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:36.354Z,1520537016.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:36.369Z,1520537016.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:36.812Z,1520537016.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:36.854Z,1520537016.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:37.152Z,1520537017.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:37.171Z,1520537017.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:37.556Z,1520537017.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:37.572Z,1520537017.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:37.961Z,1520537017.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:37.976Z,1520537017.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:38.358Z,1520537018.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:38.449Z,1520537018.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:38.753Z,1520537018.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:38.769Z,1520537018.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:39.149Z,1520537019.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:39.168Z,1520537019.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:39.543Z,1520537019.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:39.571Z,1520537019.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:39.944Z,1520537019.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:39.976Z,1520537019.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:40.346Z,1520537020.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:40.478Z,1520537020.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:40.766Z,1520537020.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:40.781Z,1520537020.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:41.162Z,1520537021.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:41.177Z,1520537021.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:41.566Z,1520537021.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:41.586Z,1520537021.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:41.947Z,1520537021.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:41.975Z,1520537021.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:42.342Z,1520537022.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:42.374Z,1520537022.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:42.775Z,1520537022.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:42.834Z,1520537022.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:43.147Z,1520537023.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:43.191Z,1520537023.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:43.555Z,1520537023.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:43.590Z,1520537023.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:43.970Z,1520537023.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:43.985Z,1520537023.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:44.355Z,1520537024.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:44.386Z,1520537024.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:44.745Z,1520537024.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:44.761Z,1520537024.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:45.151Z,1520537025.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:45.165Z,1520537025.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:45.544Z,1520537025.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:45.560Z,1520537025.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:45.947Z,1520537025.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:45.963Z,1520537025.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:46.352Z,1520537026.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:46.398Z,1520537026.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:46.767Z,1520537026.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:46.799Z,1520537026.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:47.163Z,1520537027.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:47.201Z,1520537027.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:47.561Z,1520537027.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:47.589Z,1520537027.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:47.960Z,1520537027.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:47.992Z,1520537027.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:48.347Z,1520537028.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:48.372Z,1520537028.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:48.752Z,1520537028.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:48.767Z,1520537028.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:49.147Z,1520537029.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:49.163Z,1520537029.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:49.566Z,1520537029.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:49.593Z,1520537029.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:49.965Z,1520537029.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:49.979Z,1520537029.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:50.365Z,1520537030.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:50.401Z,1520537030.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:50.753Z,1520537030.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:50.769Z,1520537030.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:51.153Z,1520537031.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:51.167Z,1520537031.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:51.554Z,1520537031.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:51.570Z,1520537031.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:51.954Z,1520537031.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:51.970Z,1520537031.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:52.356Z,1520537032.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:52.371Z,1520537032.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:52.757Z,1520537032.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:52.773Z,1520537032.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:53.157Z,1520537033.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:53.172Z,1520537033.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:53.558Z,1520537033.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:53.578Z,1520537033.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:53.950Z,1520537033.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:53.965Z,1520537033.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:54.347Z,1520537034.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:54.363Z,1520537034.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:54.754Z,1520537034.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:54.769Z,1520537034.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:55.150Z,1520537035.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:55.166Z,1520537035.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:55.557Z,1520537035.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:55.573Z,1520537035.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:55.961Z,1520537035.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:55.976Z,1520537035.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:56.358Z,1520537036.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:56.374Z,1520537036.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:56.751Z,1520537036.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:56.766Z,1520537036.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:57.156Z,1520537037.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:57.171Z,1520537037.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:57.548Z,1520537037.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:57.564Z,1520537037.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:57.952Z,1520537037.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:57.967Z,1520537037.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:58.354Z,1520537038.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:58.370Z,1520537038.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:58.757Z,1520537038.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:58.774Z,1520537038.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:59.156Z,1520537039.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:59.172Z,1520537039.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:59.557Z,1520537039.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:59.579Z,1520537039.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:23:59.955Z,1520537039.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:23:59.970Z,1520537039.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:00.354Z,1520537040.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:00.369Z,1520537040.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:00.753Z,1520537040.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:00.767Z,1520537040.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:01.145Z,1520537041.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:01.179Z,1520537041.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:01.560Z,1520537041.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:01.576Z,1520537041.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:01.961Z,1520537041.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:01.976Z,1520537041.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:02.360Z,1520537042.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:02.376Z,1520537042.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:02.756Z,1520537042.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:02.771Z,1520537042.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:03.157Z,1520537043.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:03.171Z,1520537043.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:03.536Z,1520537043.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:03.568Z,1520537043.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:03.958Z,1520537043.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:03.973Z,1520537043.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:04.351Z,1520537044.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:04.367Z,1520537044.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:04.761Z,1520537044.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:04.783Z,1520537044.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:05.164Z,1520537045.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:05.179Z,1520537045.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:05.565Z,1520537045.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:05.587Z,1520537045.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:05.955Z,1520537045.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:05.972Z,1520537045.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:06.349Z,1520537046.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:06.369Z,1520537046.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:06.764Z,1520537046.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:06.779Z,1520537046.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:09.851Z,1520537049.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:09.867Z,1520537049.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:09.973Z,1520537049.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:10.014Z,1520537050.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:10.337Z,1520537050.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:10.362Z,1520537050.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:10.733Z,1520537050.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:10.761Z,1520537050.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:11.122Z,1520537051.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:11.143Z,1520537051.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:11.521Z,1520537051.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:11.536Z,1520537051.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:11.923Z,1520537051.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:11.938Z,1520537051.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:12.327Z,1520537052.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:12.347Z,1520537052.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:12.729Z,1520537052.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:12.745Z,1520537052.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:13.129Z,1520537053.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:13.144Z,1520537053.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:13.538Z,1520537053.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:13.571Z,1520537053.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:13.924Z,1520537053.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:13.946Z,1520537053.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:14.324Z,1520537054.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:14.339Z,1520537054.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:14.724Z,1520537054.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:14.739Z,1520537054.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:15.124Z,1520537055.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:15.139Z,1520537055.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:15.529Z,1520537055.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:15.544Z,1520537055.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:15.977Z,1520537055.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:15.993Z,1520537055.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:16.337Z,1520537056.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:16.352Z,1520537056.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:16.726Z,1520537056.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:16.741Z,1520537056.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:17.135Z,1520537057.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:17.154Z,1520537057.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:17.519Z,1520537057.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:17.545Z,1520537057.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:17.915Z,1520537057.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:17.951Z,1520537057.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:18.319Z,1520537058.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:18.350Z,1520537058.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:18.733Z,1520537058.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:18.749Z,1520537058.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:19.142Z,1520537059.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:19.157Z,1520537059.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:19.546Z,1520537059.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:19.585Z,1520537059.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:19.919Z,1520537059.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:19.945Z,1520537059.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:20.315Z,1520537060.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:20.342Z,1520537060.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:20.719Z,1520537060.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:20.746Z,1520537060.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:21.119Z,1520537061.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:21.146Z,1520537061.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:21.532Z,1520537061.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:21.547Z,1520537061.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:21.937Z,1520537061.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:21.968Z,1520537061.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:22.325Z,1520537062.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:22.341Z,1520537062.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:22.724Z,1520537062.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:22.739Z,1520537062.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:23.124Z,1520537063.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:23.140Z,1520537063.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:23.524Z,1520537063.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:23.539Z,1520537063.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:23.924Z,1520537063.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:23.939Z,1520537063.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:24.322Z,1520537064.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:24.337Z,1520537064.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:24.737Z,1520537064.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:24.768Z,1520537064.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:25.137Z,1520537065.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:25.168Z,1520537065.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:25.529Z,1520537065.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:25.545Z,1520537065.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:25.923Z,1520537065.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:25.946Z,1520537065.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:26.325Z,1520537066.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:26.340Z,1520537066.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:26.726Z,1520537066.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:26.741Z,1520537066.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:27.124Z,1520537067.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:27.146Z,1520537067.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:27.537Z,1520537067.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:27.552Z,1520537067.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:27.930Z,1520537067.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:27.945Z,1520537067.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:28.337Z,1520537068.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:28.352Z,1520537068.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:28.729Z,1520537068.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:28.743Z,1520537068.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:29.112Z,1520537069.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:29.143Z,1520537069.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:29.526Z,1520537069.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:29.546Z,1520537069.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:29.929Z,1520537069.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:29.945Z,1520537069.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:30.327Z,1520537070.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:30.342Z,1520537070.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:30.734Z,1520537070.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:30.749Z,1520537070.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:31.133Z,1520537071.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:31.148Z,1520537071.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:31.528Z,1520537071.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:31.544Z,1520537071.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:31.927Z,1520537071.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:31.943Z,1520537071.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:32.323Z,1520537072.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:32.339Z,1520537072.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:32.725Z,1520537072.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:32.740Z,1520537072.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:33.121Z,1520537073.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:33.141Z,1520537073.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:33.533Z,1520537073.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:33.548Z,1520537073.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:33.933Z,1520537073.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:33.949Z,1520537073.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:34.332Z,1520537074.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:34.371Z,1520537074.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:34.724Z,1520537074.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:34.739Z,1520537074.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:35.121Z,1520537075.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:35.144Z,1520537075.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:35.529Z,1520537075.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:35.553Z,1520537075.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:35.917Z,1520537075.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:35.953Z,1520537075.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:36.314Z,1520537076.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:36.350Z,1520537076.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:36.727Z,1520537076.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:36.767Z,1520537076.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:37.131Z,1520537077.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:37.217Z,1520537077.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:37.526Z,1520537077.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:37.559Z,1520537077.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:37.923Z,1520537077.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:37.959Z,1520537077.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:38.319Z,1520537078.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:38.334Z,1520537078.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:38.724Z,1520537078.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:38.739Z,1520537078.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:39.120Z,1520537079.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:39.143Z,1520537079.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:39.534Z,1520537079.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:39.569Z,1520537079.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:39.930Z,1520537079.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:39.945Z,1520537079.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:40.338Z,1520537080.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:40.371Z,1520537080.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:40.723Z,1520537080.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:40.739Z,1520537080.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:41.111Z,1520537081.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:41.139Z,1520537081.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:41.527Z,1520537081.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:41.544Z,1520537081.544 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:41.544Z,1520537081.544 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 233
2018-03-08T19:24:41.544Z,1520537081.544 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T19:24:41.546Z,1520537081.546 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:41.546Z,1520537081.546 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 233
2018-03-08T19:24:41.546Z,1520537081.546 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T19:24:41.547Z,1520537081.547 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:41.548Z,1520537081.548 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 233
2018-03-08T19:24:41.548Z,1520537081.548 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T19:24:41.568Z,1520537081.568 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T19:24:41.568Z,1520537081.568 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T19:24:41.568Z,1520537081.568 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T19:24:41.924Z,1520537081.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:41.949Z,1520537081.949 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T19:24:41.949Z,1520537081.949 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 233
2018-03-08T19:24:41.950Z,1520537081.950 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T19:24:41.950Z,1520537081.950 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 233
2018-03-08T19:24:41.950Z,1520537081.950 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T19:24:41.950Z,1520537081.950 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 233
2018-03-08T19:24:42.329Z,1520537082.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:42.343Z,1520537082.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T19:24:42.344Z,1520537082.344 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:24:42.344Z,1520537082.344 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:24:42.345Z,1520537082.345 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T19:24:42.345Z,1520537082.345 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:24:42.346Z,1520537082.346 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:24:42.346Z,1520537082.346 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T19:24:42.346Z,1520537082.346 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:24:42.347Z,1520537082.347 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:24:42.733Z,1520537082.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:42.748Z,1520537082.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T19:24:42.749Z,1520537082.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:43.137Z,1520537083.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:43.152Z,1520537083.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T19:24:43.153Z,1520537083.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:43.532Z,1520537083.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:43.547Z,1520537083.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T19:24:43.548Z,1520537083.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:43.927Z,1520537083.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:43.946Z,1520537083.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T19:24:43.947Z,1520537083.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:44.315Z,1520537084.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:44.351Z,1520537084.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T19:24:44.352Z,1520537084.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:44.728Z,1520537084.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:44.743Z,1520537084.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T19:24:44.744Z,1520537084.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:45.131Z,1520537085.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:45.150Z,1520537085.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T19:24:45.151Z,1520537085.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:45.541Z,1520537085.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:45.555Z,1520537085.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T19:24:45.557Z,1520537085.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:45.933Z,1520537085.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:45.948Z,1520537085.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T19:24:45.949Z,1520537085.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:46.333Z,1520537086.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:46.348Z,1520537086.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T19:24:46.349Z,1520537086.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:46.715Z,1520537086.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:46.742Z,1520537086.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T19:24:46.743Z,1520537086.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:47.112Z,1520537087.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:47.146Z,1520537087.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T19:24:47.147Z,1520537087.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:47.526Z,1520537087.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:47.542Z,1520537087.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T19:24:47.543Z,1520537087.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:47.911Z,1520537087.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:47.948Z,1520537087.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T19:24:47.949Z,1520537087.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:48.327Z,1520537088.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:48.342Z,1520537088.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T19:24:48.343Z,1520537088.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:48.730Z,1520537088.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:48.757Z,1520537088.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T19:24:48.758Z,1520537088.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:49.143Z,1520537089.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:49.158Z,1520537089.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T19:24:49.159Z,1520537089.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:49.525Z,1520537089.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:49.560Z,1520537089.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T19:24:49.561Z,1520537089.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:49.919Z,1520537089.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:49.950Z,1520537089.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T19:24:49.951Z,1520537089.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:50.315Z,1520537090.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:50.350Z,1520537090.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T19:24:50.351Z,1520537090.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:50.719Z,1520537090.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:50.746Z,1520537090.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T19:24:50.747Z,1520537090.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:51.115Z,1520537091.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:51.141Z,1520537091.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T19:24:51.142Z,1520537091.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:51.538Z,1520537091.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:51.558Z,1520537091.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T19:24:51.559Z,1520537091.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:51.933Z,1520537091.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:51.952Z,1520537091.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T19:24:51.953Z,1520537091.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:52.333Z,1520537092.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:52.350Z,1520537092.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T19:24:52.351Z,1520537092.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:52.719Z,1520537092.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:52.746Z,1520537092.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T19:24:52.747Z,1520537092.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:53.109Z,1520537093.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:53.132Z,1520537093.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T19:24:53.133Z,1520537093.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:53.515Z,1520537093.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:53.550Z,1520537093.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T19:24:53.551Z,1520537093.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:53.919Z,1520537093.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:53.948Z,1520537093.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T19:24:53.949Z,1520537093.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:54.319Z,1520537094.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:54.345Z,1520537094.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T19:24:54.346Z,1520537094.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:54.738Z,1520537094.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:54.753Z,1520537094.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T19:24:54.754Z,1520537094.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:55.134Z,1520537095.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:55.149Z,1520537095.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T19:24:55.150Z,1520537095.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:55.529Z,1520537095.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:55.551Z,1520537095.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T19:24:55.553Z,1520537095.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:55.915Z,1520537095.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:55.942Z,1520537095.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T19:24:55.943Z,1520537095.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:56.319Z,1520537096.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:56.351Z,1520537096.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T19:24:56.352Z,1520537096.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:56.723Z,1520537096.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:56.742Z,1520537096.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T19:24:56.743Z,1520537096.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:57.123Z,1520537097.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:57.138Z,1520537097.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T19:24:57.139Z,1520537097.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:57.533Z,1520537097.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:57.548Z,1520537097.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T19:24:57.569Z,1520537097.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:57.933Z,1520537097.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:57.964Z,1520537097.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T19:24:57.965Z,1520537097.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:58.329Z,1520537098.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:58.344Z,1520537098.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T19:24:58.345Z,1520537098.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:58.723Z,1520537098.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:58.739Z,1520537098.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T19:24:58.740Z,1520537098.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:59.115Z,1520537099.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:59.134Z,1520537099.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T19:24:59.135Z,1520537099.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:59.524Z,1520537099.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:59.565Z,1520537099.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T19:24:59.566Z,1520537099.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:24:59.923Z,1520537099.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:24:59.938Z,1520537099.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T19:24:59.939Z,1520537099.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:00.324Z,1520537100.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:00.339Z,1520537100.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T19:25:00.340Z,1520537100.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:00.725Z,1520537100.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:00.741Z,1520537100.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T19:25:00.742Z,1520537100.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:01.129Z,1520537101.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:01.144Z,1520537101.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T19:25:01.145Z,1520537101.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:01.526Z,1520537101.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:01.555Z,1520537101.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:01.927Z,1520537101.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:01.943Z,1520537101.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:02.320Z,1520537102.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:02.342Z,1520537102.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:02.728Z,1520537102.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:02.743Z,1520537102.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:03.123Z,1520537103.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:03.138Z,1520537103.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:03.533Z,1520537103.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:03.554Z,1520537103.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:03.933Z,1520537103.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:03.954Z,1520537103.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:04.333Z,1520537104.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:04.354Z,1520537104.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:04.728Z,1520537104.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:04.743Z,1520537104.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:05.121Z,1520537105.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:05.137Z,1520537105.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:05.530Z,1520537105.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:05.546Z,1520537105.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:05.925Z,1520537105.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:05.941Z,1520537105.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:06.330Z,1520537106.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:06.345Z,1520537106.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:06.733Z,1520537106.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:06.749Z,1520537106.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:07.134Z,1520537107.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:07.149Z,1520537107.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:10.226Z,1520537110.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:10.247Z,1520537110.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:10.350Z,1520537110.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:10.381Z,1520537110.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:10.728Z,1520537110.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:10.744Z,1520537110.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:11.108Z,1520537111.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:11.143Z,1520537111.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:11.526Z,1520537111.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:11.543Z,1520537111.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:11.920Z,1520537111.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:11.935Z,1520537111.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:12.323Z,1520537112.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:12.343Z,1520537112.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:12.732Z,1520537112.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:12.755Z,1520537112.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:13.133Z,1520537113.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:13.154Z,1520537113.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:13.522Z,1520537113.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:13.543Z,1520537113.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:13.919Z,1520537113.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:13.935Z,1520537113.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:14.307Z,1520537114.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:14.343Z,1520537114.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:14.724Z,1520537114.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:14.740Z,1520537114.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:15.115Z,1520537115.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:15.138Z,1520537115.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:15.533Z,1520537115.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:15.554Z,1520537115.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:15.933Z,1520537115.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:15.954Z,1520537115.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:16.332Z,1520537116.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:16.354Z,1520537116.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:16.711Z,1520537116.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:16.747Z,1520537116.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:17.105Z,1520537117.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:17.152Z,1520537117.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:17.515Z,1520537117.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:17.542Z,1520537117.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:17.912Z,1520537117.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:17.941Z,1520537117.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:18.315Z,1520537118.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:18.342Z,1520537118.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:18.734Z,1520537118.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:18.754Z,1520537118.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:19.139Z,1520537119.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:19.154Z,1520537119.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:19.530Z,1520537119.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:19.545Z,1520537119.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:19.911Z,1520537119.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:19.948Z,1520537119.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:20.311Z,1520537120.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:20.351Z,1520537120.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:20.710Z,1520537120.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:20.743Z,1520537120.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:21.114Z,1520537121.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:21.141Z,1520537121.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:21.530Z,1520537121.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:21.551Z,1520537121.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:21.937Z,1520537121.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:21.954Z,1520537121.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:22.329Z,1520537122.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:22.345Z,1520537122.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:22.711Z,1520537122.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:22.748Z,1520537122.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:23.141Z,1520537123.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:23.167Z,1520537123.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:23.515Z,1520537123.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:23.541Z,1520537123.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:23.911Z,1520537123.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:23.944Z,1520537123.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:24.315Z,1520537124.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:24.341Z,1520537124.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:24.731Z,1520537124.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:24.747Z,1520537124.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:25.134Z,1520537125.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:25.154Z,1520537125.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:25.517Z,1520537125.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:25.555Z,1520537125.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:25.915Z,1520537125.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:25.946Z,1520537125.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:26.311Z,1520537126.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:26.342Z,1520537126.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:26.709Z,1520537126.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:26.751Z,1520537126.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:27.112Z,1520537127.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:27.150Z,1520537127.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:27.533Z,1520537127.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:27.560Z,1520537127.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:27.925Z,1520537127.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:27.956Z,1520537127.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:28.329Z,1520537128.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:28.362Z,1520537128.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:28.723Z,1520537128.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:28.738Z,1520537128.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:29.114Z,1520537129.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:29.133Z,1520537129.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:29.520Z,1520537129.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:29.536Z,1520537129.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:29.919Z,1520537129.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:29.935Z,1520537129.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:30.316Z,1520537130.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:30.339Z,1520537130.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:30.733Z,1520537130.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:30.764Z,1520537130.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:31.125Z,1520537131.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:31.140Z,1520537131.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:31.520Z,1520537131.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:31.543Z,1520537131.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:31.920Z,1520537131.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:31.935Z,1520537131.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:32.318Z,1520537132.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:32.345Z,1520537132.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:32.723Z,1520537132.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:32.742Z,1520537132.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:33.121Z,1520537133.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:33.136Z,1520537133.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:33.525Z,1520537133.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:33.541Z,1520537133.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:33.924Z,1520537133.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:33.939Z,1520537133.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:34.326Z,1520537134.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:34.341Z,1520537134.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:34.723Z,1520537134.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:34.738Z,1520537134.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:35.122Z,1520537135.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:35.137Z,1520537135.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:35.522Z,1520537135.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:35.542Z,1520537135.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:35.924Z,1520537135.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:35.939Z,1520537135.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:36.322Z,1520537136.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:36.338Z,1520537136.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:36.725Z,1520537136.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:36.741Z,1520537136.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:37.125Z,1520537137.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:37.141Z,1520537137.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:37.524Z,1520537137.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:37.540Z,1520537137.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:37.922Z,1520537137.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:37.937Z,1520537137.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:38.323Z,1520537138.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:38.339Z,1520537138.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:38.723Z,1520537138.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:38.742Z,1520537138.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:39.123Z,1520537139.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:39.138Z,1520537139.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:39.529Z,1520537139.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:39.545Z,1520537139.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:39.929Z,1520537139.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:39.944Z,1520537139.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:40.326Z,1520537140.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:40.341Z,1520537140.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:40.715Z,1520537140.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:40.746Z,1520537140.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:41.123Z,1520537141.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:41.139Z,1520537141.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:41.520Z,1520537141.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:41.535Z,1520537141.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:41.924Z,1520537141.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:41.946Z,1520537141.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:42.323Z,1520537142.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:42.338Z,1520537142.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:42.729Z,1520537142.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:42.745Z,1520537142.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:43.131Z,1520537143.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:43.172Z,1520537143.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:43.526Z,1520537143.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:43.551Z,1520537143.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:43.923Z,1520537143.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:43.947Z,1520537143.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:44.312Z,1520537144.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:44.347Z,1520537144.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:44.714Z,1520537144.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:44.750Z,1520537144.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:45.110Z,1520537145.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:45.147Z,1520537145.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:45.539Z,1520537145.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:45.555Z,1520537145.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:45.934Z,1520537145.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:45.983Z,1520537145.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:46.356Z,1520537146.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:46.380Z,1520537146.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:46.723Z,1520537146.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:46.738Z,1520537146.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:47.118Z,1520537147.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:47.167Z,1520537147.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:47.520Z,1520537147.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:47.536Z,1520537147.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:47.921Z,1520537147.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:47.936Z,1520537147.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:48.318Z,1520537148.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:48.333Z,1520537148.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:48.725Z,1520537148.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:48.741Z,1520537148.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:49.133Z,1520537149.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:49.148Z,1520537149.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:49.524Z,1520537149.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:49.539Z,1520537149.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:49.919Z,1520537149.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:49.934Z,1520537149.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:50.319Z,1520537150.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:50.342Z,1520537150.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:50.723Z,1520537150.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:50.742Z,1520537150.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:51.122Z,1520537151.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:51.142Z,1520537151.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:51.525Z,1520537151.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:51.541Z,1520537151.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:51.929Z,1520537151.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:51.944Z,1520537151.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:52.324Z,1520537152.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:52.339Z,1520537152.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:52.722Z,1520537152.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:52.737Z,1520537152.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:53.122Z,1520537153.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:53.137Z,1520537153.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:53.518Z,1520537153.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:53.538Z,1520537153.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:53.921Z,1520537153.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:53.936Z,1520537153.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:54.313Z,1520537154.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:54.341Z,1520537154.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:54.733Z,1520537154.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:54.755Z,1520537154.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:55.133Z,1520537155.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:55.148Z,1520537155.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:55.532Z,1520537155.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:55.547Z,1520537155.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:55.918Z,1520537155.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:55.938Z,1520537155.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:56.321Z,1520537156.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:56.336Z,1520537156.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:56.717Z,1520537156.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:56.739Z,1520537156.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:57.115Z,1520537157.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:57.137Z,1520537157.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:57.530Z,1520537157.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:57.545Z,1520537157.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:57.932Z,1520537157.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:57.954Z,1520537157.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:58.334Z,1520537158.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:58.354Z,1520537158.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:58.723Z,1520537158.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:58.738Z,1520537158.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:59.123Z,1520537159.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:59.142Z,1520537159.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:59.519Z,1520537159.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:59.539Z,1520537159.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:25:59.907Z,1520537159.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:25:59.934Z,1520537159.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:00.324Z,1520537160.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:00.349Z,1520537160.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:00.732Z,1520537160.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:00.748Z,1520537160.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:01.133Z,1520537161.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:01.148Z,1520537161.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:01.532Z,1520537161.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:01.547Z,1520537161.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:01.922Z,1520537161.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:01.938Z,1520537161.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:02.319Z,1520537162.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:02.334Z,1520537162.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:02.724Z,1520537162.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:02.739Z,1520537162.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:03.120Z,1520537163.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:03.142Z,1520537163.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:03.533Z,1520537163.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:03.548Z,1520537163.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:03.932Z,1520537163.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:03.954Z,1520537163.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:04.332Z,1520537164.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:04.347Z,1520537164.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:04.719Z,1520537164.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:04.734Z,1520537164.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:05.123Z,1520537165.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:05.146Z,1520537165.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:05.523Z,1520537165.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:05.543Z,1520537165.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:05.921Z,1520537165.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:05.936Z,1520537165.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:06.331Z,1520537166.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:06.346Z,1520537166.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:06.730Z,1520537166.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:06.745Z,1520537166.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:07.137Z,1520537167.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:07.152Z,1520537167.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:07.533Z,1520537167.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:07.554Z,1520537167.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:10.623Z,1520537170.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:10.639Z,1520537170.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:10.734Z,1520537170.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:10.749Z,1520537170.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:11.109Z,1520537171.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:11.138Z,1520537171.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:11.505Z,1520537171.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:11.531Z,1520537171.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:11.918Z,1520537171.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:11.934Z,1520537171.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:12.299Z,1520537172.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:12.332Z,1520537172.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:12.732Z,1520537172.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:12.747Z,1520537172.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:13.091Z,1520537173.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:13.107Z,1520537173.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:13.531Z,1520537173.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:13.581Z,1520537173.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:13.909Z,1520537173.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:13.932Z,1520537173.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:14.309Z,1520537174.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:14.338Z,1520537174.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:14.710Z,1520537174.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:14.726Z,1520537174.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:15.100Z,1520537175.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:15.115Z,1520537175.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:15.500Z,1520537175.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:15.515Z,1520537175.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:15.899Z,1520537175.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:15.922Z,1520537175.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:16.305Z,1520537176.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:16.320Z,1520537176.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:16.708Z,1520537176.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:16.732Z,1520537176.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:17.112Z,1520537177.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:17.127Z,1520537177.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:17.515Z,1520537177.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:17.530Z,1520537177.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:17.905Z,1520537177.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:17.920Z,1520537177.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:18.291Z,1520537178.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:18.318Z,1520537178.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:18.695Z,1520537178.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:18.730Z,1520537178.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:19.087Z,1520537179.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:19.124Z,1520537179.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:19.511Z,1520537179.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:19.527Z,1520537179.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:19.918Z,1520537179.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:19.933Z,1520537179.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:20.318Z,1520537180.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:20.333Z,1520537180.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:20.695Z,1520537180.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:20.722Z,1520537180.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:21.087Z,1520537181.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:21.125Z,1520537181.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:21.488Z,1520537181.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:21.527Z,1520537181.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:21.895Z,1520537181.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:21.923Z,1520537181.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:22.295Z,1520537182.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:22.324Z,1520537182.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:22.697Z,1520537182.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:22.735Z,1520537182.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:23.118Z,1520537183.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:23.133Z,1520537183.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:23.514Z,1520537183.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:23.531Z,1520537183.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:23.895Z,1520537183.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:23.927Z,1520537183.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:24.334Z,1520537184.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:24.352Z,1520537184.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:24.691Z,1520537184.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:24.732Z,1520537184.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:25.088Z,1520537185.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:25.104Z,1520537185.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:25.505Z,1520537185.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:25.532Z,1520537185.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:25.905Z,1520537185.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:25.933Z,1520537185.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:26.306Z,1520537186.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:26.338Z,1520537186.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:26.699Z,1520537186.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:26.734Z,1520537186.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:27.095Z,1520537187.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:27.110Z,1520537187.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:27.486Z,1520537187.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:27.501Z,1520537187.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:27.899Z,1520537187.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:27.934Z,1520537187.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:28.294Z,1520537188.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:28.309Z,1520537188.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:28.669Z,1520537188.669 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T19:26:28.669Z,1520537188.669 [NAL9602] Data Fault, FailCount= 5
2018-03-08T19:26:28.669Z,1520537188.669 [NAL9602](ERROR): Data Fault
2018-03-08T19:26:28.686Z,1520537188.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:28.706Z,1520537188.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:28.744Z,1520537188.744 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T19:26:28.744Z,1520537188.744 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-08T19:26:29.083Z,1520537189.083 [NAL9602](INFO): Powering down
2018-03-08T19:26:29.100Z,1520537189.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:29.115Z,1520537189.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:29.151Z,1520537189.151 [CBIT](INFO): Critical error at 20180308T192628
2018-03-08T19:26:29.495Z,1520537189.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:29.510Z,1520537189.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:29.894Z,1520537189.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:29.909Z,1520537189.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:30.298Z,1520537190.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:30.313Z,1520537190.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:30.695Z,1520537190.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:30.710Z,1520537190.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:31.091Z,1520537191.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:31.107Z,1520537191.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:31.495Z,1520537191.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:31.510Z,1520537191.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:31.891Z,1520537191.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:31.906Z,1520537191.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:32.295Z,1520537192.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:32.311Z,1520537192.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:32.698Z,1520537192.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:32.718Z,1520537192.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:33.091Z,1520537193.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:33.106Z,1520537193.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:33.491Z,1520537193.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:33.506Z,1520537193.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:33.896Z,1520537193.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:33.911Z,1520537193.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:34.294Z,1520537194.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:34.310Z,1520537194.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:34.690Z,1520537194.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:34.713Z,1520537194.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:35.095Z,1520537195.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:35.111Z,1520537195.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:35.495Z,1520537195.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:35.515Z,1520537195.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:35.900Z,1520537195.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:35.916Z,1520537195.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:36.295Z,1520537196.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:36.314Z,1520537196.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:36.694Z,1520537196.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:36.709Z,1520537196.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:37.094Z,1520537197.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:37.109Z,1520537197.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:37.496Z,1520537197.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:37.511Z,1520537197.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:37.899Z,1520537197.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:37.915Z,1520537197.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:38.295Z,1520537198.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:38.310Z,1520537198.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:38.699Z,1520537198.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:38.714Z,1520537198.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:39.094Z,1520537199.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:39.109Z,1520537199.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:39.494Z,1520537199.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:39.510Z,1520537199.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:39.894Z,1520537199.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:39.920Z,1520537199.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:40.296Z,1520537200.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:40.323Z,1520537200.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:40.692Z,1520537200.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:40.707Z,1520537200.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:41.094Z,1520537201.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:41.122Z,1520537201.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:41.500Z,1520537201.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:41.515Z,1520537201.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:41.899Z,1520537201.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:41.914Z,1520537201.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:42.297Z,1520537202.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:42.312Z,1520537202.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:42.701Z,1520537202.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:42.718Z,1520537202.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:43.095Z,1520537203.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:43.110Z,1520537203.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:43.501Z,1520537203.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:43.516Z,1520537203.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:43.900Z,1520537203.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:43.915Z,1520537203.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:44.301Z,1520537204.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:44.316Z,1520537204.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:44.701Z,1520537204.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:44.715Z,1520537204.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:45.101Z,1520537205.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:45.117Z,1520537205.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:45.496Z,1520537205.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:45.511Z,1520537205.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:45.897Z,1520537205.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:45.912Z,1520537205.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:46.302Z,1520537206.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:46.317Z,1520537206.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:46.692Z,1520537206.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:46.719Z,1520537206.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:47.097Z,1520537207.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:47.112Z,1520537207.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:47.496Z,1520537207.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:47.520Z,1520537207.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:47.898Z,1520537207.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:47.913Z,1520537207.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:48.301Z,1520537208.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:48.316Z,1520537208.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:48.702Z,1520537208.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:48.717Z,1520537208.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:49.098Z,1520537209.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:49.113Z,1520537209.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:49.501Z,1520537209.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:49.515Z,1520537209.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:49.896Z,1520537209.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:49.920Z,1520537209.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:50.302Z,1520537210.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:50.318Z,1520537210.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:50.697Z,1520537210.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:50.718Z,1520537210.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:51.108Z,1520537211.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:51.123Z,1520537211.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:51.502Z,1520537211.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:51.517Z,1520537211.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:51.897Z,1520537211.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:51.912Z,1520537211.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:52.296Z,1520537212.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:52.321Z,1520537212.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:52.702Z,1520537212.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:52.718Z,1520537212.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:53.099Z,1520537213.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:53.114Z,1520537213.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:53.505Z,1520537213.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:53.520Z,1520537213.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:53.902Z,1520537213.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:53.917Z,1520537213.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:54.299Z,1520537214.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:54.314Z,1520537214.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:54.702Z,1520537214.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:54.723Z,1520537214.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:55.098Z,1520537215.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:55.114Z,1520537215.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:55.503Z,1520537215.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:55.518Z,1520537215.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:55.900Z,1520537215.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:55.916Z,1520537215.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:56.302Z,1520537216.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:56.318Z,1520537216.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:56.703Z,1520537216.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:56.718Z,1520537216.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:57.096Z,1520537217.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:57.112Z,1520537217.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:57.497Z,1520537217.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:57.516Z,1520537217.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:57.901Z,1520537217.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:57.916Z,1520537217.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:58.303Z,1520537218.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:58.319Z,1520537218.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:58.703Z,1520537218.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:58.719Z,1520537218.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:59.102Z,1520537219.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:59.117Z,1520537219.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:59.483Z,1520537219.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:59.519Z,1520537219.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:26:59.894Z,1520537219.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:26:59.922Z,1520537219.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:00.291Z,1520537220.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:00.318Z,1520537220.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:00.684Z,1520537220.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:00.715Z,1520537220.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:01.094Z,1520537221.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:01.121Z,1520537221.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:01.490Z,1520537221.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:01.529Z,1520537221.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:01.894Z,1520537221.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:01.928Z,1520537221.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:02.290Z,1520537222.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:02.321Z,1520537222.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:02.695Z,1520537222.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:02.735Z,1520537222.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:03.087Z,1520537223.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:03.102Z,1520537223.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:03.494Z,1520537223.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:03.509Z,1520537223.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:03.894Z,1520537223.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:03.909Z,1520537223.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:04.290Z,1520537224.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:04.306Z,1520537224.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:04.694Z,1520537224.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:04.710Z,1520537224.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:05.094Z,1520537225.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:05.110Z,1520537225.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:05.491Z,1520537225.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:05.506Z,1520537225.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:05.894Z,1520537225.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:05.910Z,1520537225.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:06.298Z,1520537226.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:06.313Z,1520537226.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:06.690Z,1520537226.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:06.705Z,1520537226.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:06.709Z,1520537226.709 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T19:22:06.4Z
2018-03-08T19:27:06.709Z,1520537226.709 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T19:27:06.709Z,1520537226.709 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T19:27:07.098Z,1520537227.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:07.113Z,1520537227.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:07.594Z,1520537227.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:07.609Z,1520537227.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:07.899Z,1520537227.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:07.914Z,1520537227.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:11.007Z,1520537231.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:11.024Z,1520537231.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:11.138Z,1520537231.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:11.189Z,1520537231.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:11.481Z,1520537231.481 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180308T074127/Courier0272.lzma
2018-03-08T19:27:11.513Z,1520537231.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:11.550Z,1520537231.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:11.903Z,1520537231.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:11.919Z,1520537231.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:12.280Z,1520537232.280 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0272.lzma.bak
2018-03-08T19:27:12.288Z,1520537232.288 [DataOverHttps](INFO): SBD MOMSN=7988459
2018-03-08T19:27:12.316Z,1520537232.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:12.347Z,1520537232.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:12.890Z,1520537232.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:12.910Z,1520537232.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:13.108Z,1520537233.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:13.123Z,1520537233.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:16.200Z,1520537236.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:16.215Z,1520537236.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:16.308Z,1520537236.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:16.325Z,1520537236.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:16.707Z,1520537236.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:16.723Z,1520537236.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:17.104Z,1520537237.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:17.120Z,1520537237.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:17.501Z,1520537237.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:17.516Z,1520537237.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:17.900Z,1520537237.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:17.924Z,1520537237.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:18.305Z,1520537238.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:18.320Z,1520537238.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:21.398Z,1520537241.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:21.414Z,1520537241.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:21.522Z,1520537241.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:21.555Z,1520537241.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:21.849Z,1520537241.849 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0273.lzma
2018-03-08T19:27:21.875Z,1520537241.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:21.909Z,1520537241.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:22.269Z,1520537242.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:22.305Z,1520537242.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:22.652Z,1520537242.652 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0273.lzma.bak
2018-03-08T19:27:22.652Z,1520537242.652 [DataOverHttps](INFO): SBD MOMSN=7988462
2018-03-08T19:27:22.673Z,1520537242.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:22.709Z,1520537242.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:23.251Z,1520537243.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:23.265Z,1520537243.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:23.268Z,1520537243.268 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T19:27:23.269Z,1520537243.269 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T19:27:23.269Z,1520537243.269 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T19:27:23.462Z,1520537243.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:23.477Z,1520537243.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:27.852Z,1520537247.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:27.868Z,1520537247.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:27.958Z,1520537247.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:28.004Z,1520537248.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:28.342Z,1520537248.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:28.357Z,1520537248.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:28.722Z,1520537248.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:28.757Z,1520537248.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:29.122Z,1520537249.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:29.153Z,1520537249.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:29.522Z,1520537249.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:29.537Z,1520537249.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:29.915Z,1520537249.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:29.934Z,1520537249.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:30.318Z,1520537250.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:30.334Z,1520537250.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:30.719Z,1520537250.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:30.734Z,1520537250.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:31.122Z,1520537251.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:31.142Z,1520537251.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:31.523Z,1520537251.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:31.538Z,1520537251.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:31.923Z,1520537251.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:31.938Z,1520537251.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:32.319Z,1520537252.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:32.338Z,1520537252.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:32.721Z,1520537252.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:32.737Z,1520537252.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:33.122Z,1520537253.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:33.137Z,1520537253.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:33.519Z,1520537253.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:33.535Z,1520537253.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:33.921Z,1520537253.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:33.936Z,1520537253.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:34.324Z,1520537254.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:34.339Z,1520537254.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:34.720Z,1520537254.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:34.743Z,1520537254.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:35.123Z,1520537255.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:35.138Z,1520537255.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:35.523Z,1520537255.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:35.542Z,1520537255.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:35.923Z,1520537255.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:35.942Z,1520537255.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:36.323Z,1520537256.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:36.339Z,1520537256.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:36.724Z,1520537256.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:36.746Z,1520537256.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:37.111Z,1520537257.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:37.143Z,1520537257.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:37.528Z,1520537257.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:37.543Z,1520537257.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:37.923Z,1520537257.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:37.938Z,1520537257.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:38.321Z,1520537258.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:38.342Z,1520537258.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:38.723Z,1520537258.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:38.738Z,1520537258.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:39.127Z,1520537259.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:39.142Z,1520537259.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:39.519Z,1520537259.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:39.535Z,1520537259.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:39.925Z,1520537259.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:39.941Z,1520537259.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:40.324Z,1520537260.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:40.338Z,1520537260.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:40.718Z,1520537260.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:40.734Z,1520537260.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:41.121Z,1520537261.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:41.137Z,1520537261.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:41.520Z,1520537261.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:41.549Z,1520537261.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:41.921Z,1520537261.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:41.943Z,1520537261.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:42.322Z,1520537262.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:42.338Z,1520537262.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:42.737Z,1520537262.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:42.779Z,1520537262.779 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:42.779Z,1520537262.779 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 234
2018-03-08T19:27:42.779Z,1520537262.779 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T19:27:42.781Z,1520537262.781 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:42.781Z,1520537262.781 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 234
2018-03-08T19:27:42.781Z,1520537262.781 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T19:27:42.783Z,1520537262.783 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:42.783Z,1520537262.783 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 234
2018-03-08T19:27:42.783Z,1520537262.783 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T19:27:42.833Z,1520537262.833 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T19:27:42.833Z,1520537262.833 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T19:27:42.833Z,1520537262.833 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T19:27:43.115Z,1520537263.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:43.193Z,1520537263.193 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T19:27:43.193Z,1520537263.193 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 234
2018-03-08T19:27:43.194Z,1520537263.194 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T19:27:43.194Z,1520537263.194 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 234
2018-03-08T19:27:43.194Z,1520537263.194 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T19:27:43.194Z,1520537263.194 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 234
2018-03-08T19:27:43.520Z,1520537263.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:43.534Z,1520537263.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T19:27:43.534Z,1520537263.534 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:27:43.535Z,1520537263.535 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:27:43.535Z,1520537263.535 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T19:27:43.535Z,1520537263.535 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:27:43.536Z,1520537263.536 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:27:43.536Z,1520537263.536 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T19:27:43.537Z,1520537263.537 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:27:43.537Z,1520537263.537 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:27:43.916Z,1520537263.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:43.991Z,1520537263.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T19:27:43.992Z,1520537263.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:44.314Z,1520537264.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:44.345Z,1520537264.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T19:27:44.346Z,1520537264.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:44.730Z,1520537264.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:44.745Z,1520537264.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T19:27:44.746Z,1520537264.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:45.131Z,1520537265.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:45.146Z,1520537265.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T19:27:45.147Z,1520537265.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:45.517Z,1520537265.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:45.542Z,1520537265.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T19:27:45.543Z,1520537265.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:45.916Z,1520537265.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:45.979Z,1520537265.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T19:27:45.985Z,1520537265.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:46.333Z,1520537266.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:46.379Z,1520537266.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T19:27:46.380Z,1520537266.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:46.707Z,1520537266.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:46.742Z,1520537266.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T19:27:46.743Z,1520537266.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:47.115Z,1520537267.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:47.144Z,1520537267.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T19:27:47.145Z,1520537267.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:47.514Z,1520537267.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:47.540Z,1520537267.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T19:27:47.541Z,1520537267.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:47.927Z,1520537267.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:47.941Z,1520537267.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T19:27:47.942Z,1520537267.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:48.314Z,1520537268.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:48.340Z,1520537268.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T19:27:48.341Z,1520537268.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:48.715Z,1520537268.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:48.749Z,1520537268.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T19:27:48.750Z,1520537268.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:49.107Z,1520537269.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:49.143Z,1520537269.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T19:27:49.144Z,1520537269.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:49.526Z,1520537269.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:49.541Z,1520537269.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T19:27:49.542Z,1520537269.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:49.914Z,1520537269.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:49.940Z,1520537269.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T19:27:49.941Z,1520537269.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:50.325Z,1520537270.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:50.341Z,1520537270.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T19:27:50.342Z,1520537270.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:50.726Z,1520537270.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:50.741Z,1520537270.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T19:27:50.742Z,1520537270.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:51.115Z,1520537271.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:51.139Z,1520537271.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T19:27:51.141Z,1520537271.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:51.511Z,1520537271.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:51.537Z,1520537271.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T19:27:51.538Z,1520537271.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:51.925Z,1520537271.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:51.940Z,1520537271.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T19:27:51.941Z,1520537271.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:52.314Z,1520537272.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:52.339Z,1520537272.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T19:27:52.340Z,1520537272.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:52.711Z,1520537272.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:52.742Z,1520537272.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T19:27:52.743Z,1520537272.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:53.125Z,1520537273.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:53.140Z,1520537273.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T19:27:53.141Z,1520537273.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:53.514Z,1520537273.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:53.546Z,1520537273.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T19:27:53.547Z,1520537273.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:53.925Z,1520537273.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:53.941Z,1520537273.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T19:27:53.942Z,1520537273.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:54.326Z,1520537274.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:54.340Z,1520537274.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T19:27:54.341Z,1520537274.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:54.726Z,1520537274.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:54.740Z,1520537274.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T19:27:54.741Z,1520537274.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:55.111Z,1520537275.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:55.137Z,1520537275.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T19:27:55.138Z,1520537275.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:55.514Z,1520537275.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:55.546Z,1520537275.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T19:27:55.547Z,1520537275.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:55.926Z,1520537275.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:55.940Z,1520537275.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T19:27:55.941Z,1520537275.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:56.325Z,1520537276.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:56.340Z,1520537276.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T19:27:56.341Z,1520537276.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:56.727Z,1520537276.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:56.742Z,1520537276.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T19:27:56.743Z,1520537276.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:57.114Z,1520537277.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:57.139Z,1520537277.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T19:27:57.140Z,1520537277.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:57.511Z,1520537277.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:57.538Z,1520537277.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T19:27:57.539Z,1520537277.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:57.914Z,1520537277.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:57.940Z,1520537277.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T19:27:57.941Z,1520537277.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:58.314Z,1520537278.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:58.347Z,1520537278.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T19:27:58.348Z,1520537278.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:58.711Z,1520537278.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:58.739Z,1520537278.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T19:27:58.740Z,1520537278.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:59.126Z,1520537279.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:59.146Z,1520537279.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T19:27:59.147Z,1520537279.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:59.514Z,1520537279.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:59.548Z,1520537279.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T19:27:59.549Z,1520537279.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:27:59.926Z,1520537279.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:27:59.940Z,1520537279.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T19:27:59.941Z,1520537279.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:00.325Z,1520537280.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:00.340Z,1520537280.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T19:28:00.341Z,1520537280.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:00.714Z,1520537280.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:00.739Z,1520537280.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T19:28:00.741Z,1520537280.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:01.111Z,1520537281.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:01.145Z,1520537281.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T19:28:01.146Z,1520537281.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:01.527Z,1520537281.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:01.542Z,1520537281.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T19:28:01.543Z,1520537281.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:01.925Z,1520537281.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:01.939Z,1520537281.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T19:28:01.940Z,1520537281.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:02.326Z,1520537282.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:02.340Z,1520537282.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T19:28:02.341Z,1520537282.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:02.734Z,1520537282.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:02.783Z,1520537282.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:03.114Z,1520537283.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:03.155Z,1520537283.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:03.510Z,1520537283.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:03.536Z,1520537283.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:03.934Z,1520537283.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:03.949Z,1520537283.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:04.325Z,1520537284.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:04.350Z,1520537284.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:04.710Z,1520537284.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:04.744Z,1520537284.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:05.126Z,1520537285.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:05.146Z,1520537285.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:05.547Z,1520537285.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:05.563Z,1520537285.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:05.925Z,1520537285.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:05.940Z,1520537285.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:06.327Z,1520537286.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:06.342Z,1520537286.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:06.718Z,1520537286.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:06.750Z,1520537286.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:07.107Z,1520537287.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:07.135Z,1520537287.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:07.534Z,1520537287.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:07.555Z,1520537287.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:07.914Z,1520537287.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:07.950Z,1520537287.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:08.314Z,1520537288.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:08.338Z,1520537288.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:08.718Z,1520537288.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:08.750Z,1520537288.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:09.118Z,1520537289.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:09.151Z,1520537289.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:09.511Z,1520537289.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:09.526Z,1520537289.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:09.918Z,1520537289.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:09.954Z,1520537289.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:10.314Z,1520537290.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:10.351Z,1520537290.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:10.718Z,1520537290.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:10.733Z,1520537290.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:11.120Z,1520537291.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:11.135Z,1520537291.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:11.521Z,1520537291.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:11.559Z,1520537291.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:11.922Z,1520537291.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:11.937Z,1520537291.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:12.328Z,1520537292.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:12.374Z,1520537292.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:12.723Z,1520537292.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:12.762Z,1520537292.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:13.120Z,1520537293.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:13.136Z,1520537293.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:13.522Z,1520537293.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:13.542Z,1520537293.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:13.924Z,1520537293.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:13.939Z,1520537293.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:14.324Z,1520537294.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:14.339Z,1520537294.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:14.724Z,1520537294.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:14.739Z,1520537294.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:15.118Z,1520537295.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:15.138Z,1520537295.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:15.522Z,1520537295.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:15.537Z,1520537295.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:15.922Z,1520537295.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:15.937Z,1520537295.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:16.320Z,1520537296.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:16.343Z,1520537296.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:16.724Z,1520537296.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:16.739Z,1520537296.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:17.116Z,1520537297.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:17.131Z,1520537297.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:17.524Z,1520537297.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:17.539Z,1520537297.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:17.924Z,1520537297.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:17.939Z,1520537297.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:18.319Z,1520537298.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:18.335Z,1520537298.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:18.722Z,1520537298.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:18.742Z,1520537298.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:19.119Z,1520537299.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:19.134Z,1520537299.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:19.519Z,1520537299.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:19.534Z,1520537299.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:19.919Z,1520537299.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:19.947Z,1520537299.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:20.323Z,1520537300.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:20.338Z,1520537300.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:20.716Z,1520537300.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:20.732Z,1520537300.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:21.123Z,1520537301.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:21.146Z,1520537301.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:21.525Z,1520537301.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:21.540Z,1520537301.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:21.925Z,1520537301.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:21.940Z,1520537301.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:22.326Z,1520537302.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:22.341Z,1520537302.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:22.726Z,1520537302.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:22.741Z,1520537302.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:23.120Z,1520537303.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:23.135Z,1520537303.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:23.522Z,1520537303.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:23.541Z,1520537303.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:23.925Z,1520537303.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:23.940Z,1520537303.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:27.042Z,1520537307.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:27.073Z,1520537307.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:27.157Z,1520537307.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:27.198Z,1520537307.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:27.538Z,1520537307.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:27.553Z,1520537307.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:27.931Z,1520537307.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:27.946Z,1520537307.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:28.334Z,1520537308.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:28.350Z,1520537308.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:28.738Z,1520537308.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:28.753Z,1520537308.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:28.804Z,1520537308.804 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T19:28:28.804Z,1520537308.804 [NAL9602] No Fault, FailCount= 5
2018-03-08T19:28:29.112Z,1520537309.112 [NAL9602](INFO): Powering up NAL9602
2018-03-08T19:28:29.140Z,1520537309.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:29.155Z,1520537309.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:29.540Z,1520537309.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:29.555Z,1520537309.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:29.939Z,1520537309.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:29.954Z,1520537309.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:30.339Z,1520537310.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:30.354Z,1520537310.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:30.735Z,1520537310.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:30.751Z,1520537310.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:31.137Z,1520537311.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:31.152Z,1520537311.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:31.534Z,1520537311.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:31.550Z,1520537311.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:31.939Z,1520537311.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:31.955Z,1520537311.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:32.342Z,1520537312.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:32.362Z,1520537312.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:32.735Z,1520537312.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:32.750Z,1520537312.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:33.140Z,1520537313.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:33.155Z,1520537313.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:33.539Z,1520537313.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:33.554Z,1520537313.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:33.935Z,1520537313.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:33.950Z,1520537313.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:34.336Z,1520537314.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:34.351Z,1520537314.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:34.739Z,1520537314.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:34.754Z,1520537314.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:35.135Z,1520537315.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:35.150Z,1520537315.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:35.537Z,1520537315.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:35.553Z,1520537315.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:35.939Z,1520537315.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:35.954Z,1520537315.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:36.339Z,1520537316.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:36.355Z,1520537316.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:36.739Z,1520537316.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:36.755Z,1520537316.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:37.140Z,1520537317.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:37.155Z,1520537317.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:37.535Z,1520537317.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:37.550Z,1520537317.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:37.939Z,1520537317.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:37.955Z,1520537317.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:38.339Z,1520537318.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:38.354Z,1520537318.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:38.736Z,1520537318.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:38.751Z,1520537318.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:39.137Z,1520537319.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:39.157Z,1520537319.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:39.541Z,1520537319.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:39.556Z,1520537319.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:39.923Z,1520537319.923 [NAL9602](INFO): NAL9602 initialized
2018-03-08T19:28:39.940Z,1520537319.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:39.956Z,1520537319.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:40.338Z,1520537320.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:40.353Z,1520537320.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:40.753Z,1520537320.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:40.768Z,1520537320.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:41.140Z,1520537321.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:41.162Z,1520537321.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:41.553Z,1520537321.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:41.585Z,1520537321.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:41.949Z,1520537321.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:41.964Z,1520537321.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:42.343Z,1520537322.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:42.362Z,1520537322.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:42.741Z,1520537322.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:42.757Z,1520537322.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:43.145Z,1520537323.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:43.160Z,1520537323.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:43.545Z,1520537323.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:43.596Z,1520537323.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:43.946Z,1520537323.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:43.962Z,1520537323.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:44.340Z,1520537324.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:44.355Z,1520537324.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:44.739Z,1520537324.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:44.755Z,1520537324.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:45.143Z,1520537325.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:45.162Z,1520537325.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:45.541Z,1520537325.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:45.591Z,1520537325.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:45.945Z,1520537325.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:45.962Z,1520537325.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:46.349Z,1520537326.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:46.365Z,1520537326.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:46.749Z,1520537326.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:46.765Z,1520537326.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:47.143Z,1520537327.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:47.158Z,1520537327.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:47.542Z,1520537327.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:47.562Z,1520537327.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:47.945Z,1520537327.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:47.966Z,1520537327.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:48.345Z,1520537328.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:48.361Z,1520537328.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:48.746Z,1520537328.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:48.761Z,1520537328.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:49.139Z,1520537329.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:49.158Z,1520537329.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:49.531Z,1520537329.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:49.554Z,1520537329.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:49.945Z,1520537329.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:49.961Z,1520537329.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:50.349Z,1520537330.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:50.365Z,1520537330.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:50.745Z,1520537330.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:50.766Z,1520537330.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:51.143Z,1520537331.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:51.158Z,1520537331.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:51.543Z,1520537331.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:51.558Z,1520537331.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:51.945Z,1520537331.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:51.961Z,1520537331.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:52.345Z,1520537332.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:52.361Z,1520537332.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:52.749Z,1520537332.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:52.765Z,1520537332.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:53.144Z,1520537333.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:53.160Z,1520537333.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:53.538Z,1520537333.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:53.561Z,1520537333.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:53.949Z,1520537333.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:53.970Z,1520537333.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:54.349Z,1520537334.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:54.365Z,1520537334.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:54.748Z,1520537334.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:54.763Z,1520537334.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:55.141Z,1520537335.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:55.157Z,1520537335.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:55.536Z,1520537335.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:55.569Z,1520537335.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:55.949Z,1520537335.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:55.964Z,1520537335.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:56.349Z,1520537336.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:56.365Z,1520537336.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:56.749Z,1520537336.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:56.764Z,1520537336.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:57.144Z,1520537337.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:57.159Z,1520537337.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:57.544Z,1520537337.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:57.560Z,1520537337.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:57.948Z,1520537337.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:57.964Z,1520537337.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:58.348Z,1520537338.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:58.364Z,1520537338.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:58.749Z,1520537338.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:58.770Z,1520537338.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:59.131Z,1520537339.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:59.172Z,1520537339.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:59.530Z,1520537339.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:59.566Z,1520537339.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:28:59.958Z,1520537339.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:28:59.975Z,1520537339.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:00.349Z,1520537340.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:00.379Z,1520537340.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:00.755Z,1520537340.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:00.771Z,1520537340.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:01.140Z,1520537341.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:01.169Z,1520537341.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:01.536Z,1520537341.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:01.560Z,1520537341.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:01.949Z,1520537341.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:01.973Z,1520537341.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:02.361Z,1520537342.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:02.382Z,1520537342.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:02.749Z,1520537342.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:02.782Z,1520537342.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:03.140Z,1520537343.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:03.171Z,1520537343.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:03.533Z,1520537343.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:03.548Z,1520537343.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:03.950Z,1520537343.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:03.975Z,1520537343.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:04.350Z,1520537344.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:04.372Z,1520537344.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:04.769Z,1520537344.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:04.784Z,1520537344.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:05.137Z,1520537345.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:05.167Z,1520537345.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:05.538Z,1520537345.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:05.554Z,1520537345.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:05.954Z,1520537345.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:05.979Z,1520537345.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:06.345Z,1520537346.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:06.373Z,1520537346.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:06.749Z,1520537346.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:06.781Z,1520537346.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:07.141Z,1520537347.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:07.157Z,1520537347.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:07.535Z,1520537347.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:07.554Z,1520537347.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:07.945Z,1520537347.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:07.961Z,1520537347.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:08.353Z,1520537348.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:08.368Z,1520537348.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:08.750Z,1520537348.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:08.765Z,1520537348.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:09.141Z,1520537349.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:09.157Z,1520537349.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:09.543Z,1520537349.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:09.558Z,1520537349.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:09.945Z,1520537349.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:09.961Z,1520537349.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:10.344Z,1520537350.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:10.359Z,1520537350.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:10.750Z,1520537350.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:10.765Z,1520537350.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:11.135Z,1520537351.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:11.158Z,1520537351.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:11.538Z,1520537351.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:11.554Z,1520537351.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:11.950Z,1520537351.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:11.965Z,1520537351.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:12.349Z,1520537352.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:12.365Z,1520537352.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:12.748Z,1520537352.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:12.764Z,1520537352.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:13.139Z,1520537353.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:13.159Z,1520537353.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:13.543Z,1520537353.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:13.558Z,1520537353.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:13.948Z,1520537353.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:13.964Z,1520537353.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:14.350Z,1520537354.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:14.365Z,1520537354.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:14.749Z,1520537354.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:14.764Z,1520537354.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:15.143Z,1520537355.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:15.159Z,1520537355.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:15.544Z,1520537355.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:15.559Z,1520537355.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:15.948Z,1520537355.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:15.964Z,1520537355.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:16.349Z,1520537356.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:16.364Z,1520537356.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:16.758Z,1520537356.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:16.774Z,1520537356.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:17.144Z,1520537357.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:17.160Z,1520537357.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:17.540Z,1520537357.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:17.555Z,1520537357.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:17.952Z,1520537357.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:17.967Z,1520537357.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:18.356Z,1520537358.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:18.371Z,1520537358.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:18.753Z,1520537358.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:18.769Z,1520537358.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:19.144Z,1520537359.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:19.160Z,1520537359.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:19.531Z,1520537359.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:19.571Z,1520537359.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:19.953Z,1520537359.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:19.968Z,1520537359.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:20.354Z,1520537360.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:20.374Z,1520537360.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:20.754Z,1520537360.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:20.769Z,1520537360.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:21.127Z,1520537361.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:21.151Z,1520537361.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:21.535Z,1520537361.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:21.570Z,1520537361.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:21.937Z,1520537361.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:21.973Z,1520537361.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:22.357Z,1520537362.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:22.373Z,1520537362.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:22.754Z,1520537362.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:22.769Z,1520537362.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:23.131Z,1520537363.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:23.163Z,1520537363.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:23.535Z,1520537363.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:23.566Z,1520537363.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:23.949Z,1520537363.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:23.978Z,1520537363.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:27.042Z,1520537367.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:27.072Z,1520537367.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:27.187Z,1520537367.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:27.230Z,1520537367.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:27.522Z,1520537367.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:27.542Z,1520537367.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:27.927Z,1520537367.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:27.941Z,1520537367.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:28.331Z,1520537368.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:28.370Z,1520537368.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:28.724Z,1520537368.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:28.739Z,1520537368.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:29.137Z,1520537369.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:29.171Z,1520537369.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:29.529Z,1520537369.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:29.544Z,1520537369.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:29.937Z,1520537369.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:29.972Z,1520537369.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:30.325Z,1520537370.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:30.339Z,1520537370.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:30.722Z,1520537370.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:30.749Z,1520537370.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:31.129Z,1520537371.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:31.150Z,1520537371.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:31.528Z,1520537371.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:31.543Z,1520537371.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:31.941Z,1520537371.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:31.972Z,1520537371.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:32.337Z,1520537372.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:32.352Z,1520537372.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:32.733Z,1520537372.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:32.754Z,1520537372.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:33.127Z,1520537373.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:33.142Z,1520537373.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:33.521Z,1520537373.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:33.555Z,1520537373.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:33.938Z,1520537373.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:33.953Z,1520537373.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:34.338Z,1520537374.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:34.354Z,1520537374.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:34.737Z,1520537374.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:34.753Z,1520537374.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:35.133Z,1520537375.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:35.148Z,1520537375.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:35.517Z,1520537375.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:35.540Z,1520537375.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:35.936Z,1520537375.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:35.959Z,1520537375.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:36.336Z,1520537376.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:36.351Z,1520537376.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:36.737Z,1520537376.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:36.753Z,1520537376.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:37.131Z,1520537377.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:37.147Z,1520537377.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:37.531Z,1520537377.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:37.546Z,1520537377.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:37.936Z,1520537377.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:37.951Z,1520537377.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:38.336Z,1520537378.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:38.359Z,1520537378.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:38.738Z,1520537378.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:38.753Z,1520537378.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:39.132Z,1520537379.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:39.148Z,1520537379.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:39.523Z,1520537379.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:39.545Z,1520537379.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:39.941Z,1520537379.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:39.962Z,1520537379.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:40.340Z,1520537380.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:40.355Z,1520537380.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:40.742Z,1520537380.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:40.763Z,1520537380.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:41.133Z,1520537381.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:41.148Z,1520537381.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:41.514Z,1520537381.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:41.549Z,1520537381.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:41.937Z,1520537381.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:41.959Z,1520537381.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:42.341Z,1520537382.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:42.356Z,1520537382.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:42.741Z,1520537382.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:42.765Z,1520537382.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:43.142Z,1520537383.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:43.166Z,1520537383.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:43.528Z,1520537383.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:43.563Z,1520537383.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:43.932Z,1520537383.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:43.975Z,1520537383.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:44.340Z,1520537384.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:44.356Z,1520537384.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:44.743Z,1520537384.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:44.758Z,1520537384.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:45.124Z,1520537385.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:45.155Z,1520537385.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:45.528Z,1520537385.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:45.571Z,1520537385.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:45.933Z,1520537385.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:45.955Z,1520537385.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:46.335Z,1520537386.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:46.385Z,1520537386.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:46.729Z,1520537386.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:46.745Z,1520537386.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:47.128Z,1520537387.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:47.143Z,1520537387.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:47.526Z,1520537387.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:47.541Z,1520537387.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:47.929Z,1520537387.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:47.945Z,1520537387.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:48.341Z,1520537388.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:48.356Z,1520537388.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:48.729Z,1520537388.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:48.745Z,1520537388.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:49.129Z,1520537389.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:49.144Z,1520537389.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:49.527Z,1520537389.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:49.542Z,1520537389.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:49.941Z,1520537389.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:49.973Z,1520537389.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:50.338Z,1520537390.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:50.353Z,1520537390.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:50.733Z,1520537390.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:50.748Z,1520537390.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:51.131Z,1520537391.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:51.146Z,1520537391.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:51.526Z,1520537391.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:51.542Z,1520537391.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:51.933Z,1520537391.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:51.948Z,1520537391.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:52.337Z,1520537392.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:52.358Z,1520537392.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:52.736Z,1520537392.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:52.751Z,1520537392.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:53.133Z,1520537393.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:53.148Z,1520537393.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:53.524Z,1520537393.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:53.539Z,1520537393.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:53.936Z,1520537393.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:53.951Z,1520537393.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:54.337Z,1520537394.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:54.359Z,1520537394.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:54.732Z,1520537394.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:54.748Z,1520537394.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:55.132Z,1520537395.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:55.154Z,1520537395.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:55.531Z,1520537395.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:55.550Z,1520537395.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:55.936Z,1520537395.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:55.952Z,1520537395.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:56.337Z,1520537396.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:56.352Z,1520537396.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:56.763Z,1520537396.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:56.826Z,1520537396.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:57.125Z,1520537397.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:57.141Z,1520537397.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:57.533Z,1520537397.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:57.622Z,1520537397.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:57.937Z,1520537397.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:57.953Z,1520537397.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:58.337Z,1520537398.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:58.352Z,1520537398.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:58.735Z,1520537398.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:58.755Z,1520537398.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:59.129Z,1520537399.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:59.144Z,1520537399.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:59.527Z,1520537399.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:59.547Z,1520537399.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:29:59.937Z,1520537399.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:29:59.953Z,1520537399.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:00.354Z,1520537400.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:00.404Z,1520537400.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:00.733Z,1520537400.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:00.748Z,1520537400.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:01.132Z,1520537401.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:01.147Z,1520537401.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:01.536Z,1520537401.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:01.551Z,1520537401.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:01.934Z,1520537401.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:01.949Z,1520537401.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:02.336Z,1520537402.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:02.358Z,1520537402.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:02.737Z,1520537402.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:02.753Z,1520537402.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:03.132Z,1520537403.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:03.147Z,1520537403.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:03.535Z,1520537403.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:03.551Z,1520537403.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:03.937Z,1520537403.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:03.959Z,1520537403.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:04.337Z,1520537404.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:04.353Z,1520537404.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:04.736Z,1520537404.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:04.751Z,1520537404.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:05.157Z,1520537405.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:05.207Z,1520537405.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:05.530Z,1520537405.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:05.550Z,1520537405.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:05.937Z,1520537405.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:05.952Z,1520537405.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:06.341Z,1520537406.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:06.356Z,1520537406.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:06.739Z,1520537406.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:06.754Z,1520537406.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:07.132Z,1520537407.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:07.147Z,1520537407.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:07.525Z,1520537407.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:07.547Z,1520537407.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:07.940Z,1520537407.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:07.956Z,1520537407.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:08.341Z,1520537408.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:08.356Z,1520537408.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:08.742Z,1520537408.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:08.758Z,1520537408.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:09.132Z,1520537409.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:09.148Z,1520537409.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:09.528Z,1520537409.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:09.543Z,1520537409.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:09.942Z,1520537409.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:09.957Z,1520537409.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:10.341Z,1520537410.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:10.356Z,1520537410.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:10.741Z,1520537410.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:10.762Z,1520537410.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:11.134Z,1520537411.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:11.149Z,1520537411.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:11.516Z,1520537411.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:11.547Z,1520537411.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:11.941Z,1520537411.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:11.956Z,1520537411.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:12.341Z,1520537412.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:12.357Z,1520537412.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:12.737Z,1520537412.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:12.752Z,1520537412.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:13.127Z,1520537413.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:13.143Z,1520537413.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:13.528Z,1520537413.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:13.545Z,1520537413.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:13.930Z,1520537413.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:13.957Z,1520537413.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:14.344Z,1520537414.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:14.367Z,1520537414.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:14.742Z,1520537414.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:14.757Z,1520537414.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:15.115Z,1520537415.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:15.142Z,1520537415.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:15.518Z,1520537415.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:15.556Z,1520537415.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:15.944Z,1520537415.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:15.960Z,1520537415.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:16.344Z,1520537416.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:16.359Z,1520537416.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:16.741Z,1520537416.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:16.756Z,1520537416.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:17.132Z,1520537417.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:17.147Z,1520537417.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:17.531Z,1520537417.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:17.546Z,1520537417.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:17.938Z,1520537417.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:17.953Z,1520537417.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:18.339Z,1520537418.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:18.354Z,1520537418.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:18.742Z,1520537418.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:18.757Z,1520537418.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:19.136Z,1520537419.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:19.151Z,1520537419.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:19.519Z,1520537419.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:19.551Z,1520537419.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:19.934Z,1520537419.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:19.949Z,1520537419.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:20.342Z,1520537420.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:20.357Z,1520537420.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:20.741Z,1520537420.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:20.756Z,1520537420.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:21.133Z,1520537421.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:21.149Z,1520537421.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:21.519Z,1520537421.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:21.554Z,1520537421.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:21.942Z,1520537421.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:21.962Z,1520537421.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:22.345Z,1520537422.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:22.361Z,1520537422.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:22.738Z,1520537422.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:22.758Z,1520537422.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:23.120Z,1520537423.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:23.159Z,1520537423.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:23.523Z,1520537423.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:23.550Z,1520537423.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:23.937Z,1520537423.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:23.953Z,1520537423.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:24.341Z,1520537424.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:24.356Z,1520537424.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:27.438Z,1520537427.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:27.459Z,1520537427.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:27.549Z,1520537427.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:27.593Z,1520537427.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:27.911Z,1520537427.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:27.951Z,1520537427.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:28.315Z,1520537428.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:28.351Z,1520537428.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:28.705Z,1520537428.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:28.721Z,1520537428.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:29.125Z,1520537429.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:29.154Z,1520537429.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:29.525Z,1520537429.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:29.548Z,1520537429.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:29.922Z,1520537429.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:29.947Z,1520537429.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:30.312Z,1520537430.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:30.328Z,1520537430.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:30.715Z,1520537430.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:30.730Z,1520537430.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:31.105Z,1520537431.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:31.121Z,1520537431.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:31.514Z,1520537431.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:31.550Z,1520537431.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:31.925Z,1520537431.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:31.959Z,1520537431.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:32.329Z,1520537432.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:32.359Z,1520537432.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:32.725Z,1520537432.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:32.761Z,1520537432.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:33.113Z,1520537433.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:33.128Z,1520537433.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:33.510Z,1520537433.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:33.529Z,1520537433.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:33.929Z,1520537433.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:33.960Z,1520537433.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:34.329Z,1520537434.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:34.365Z,1520537434.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:34.718Z,1520537434.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:34.733Z,1520537434.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:35.116Z,1520537435.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:35.131Z,1520537435.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:35.515Z,1520537435.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:35.531Z,1520537435.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:35.917Z,1520537435.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:35.933Z,1520537435.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:36.329Z,1520537436.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:36.344Z,1520537436.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:36.725Z,1520537436.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:36.741Z,1520537436.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:37.114Z,1520537437.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:37.133Z,1520537437.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:37.513Z,1520537437.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:37.541Z,1520537437.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:37.933Z,1520537437.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:37.948Z,1520537437.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:38.332Z,1520537438.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:38.347Z,1520537438.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:38.725Z,1520537438.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:38.741Z,1520537438.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:39.108Z,1520537439.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:39.144Z,1520537439.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:39.520Z,1520537439.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:39.535Z,1520537439.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:39.925Z,1520537439.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:39.941Z,1520537439.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:40.329Z,1520537440.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:40.345Z,1520537440.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:40.729Z,1520537440.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:40.750Z,1520537440.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:41.107Z,1520537441.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:41.134Z,1520537441.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:41.507Z,1520537441.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:41.535Z,1520537441.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:41.929Z,1520537441.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:41.945Z,1520537441.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:42.334Z,1520537442.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:42.349Z,1520537442.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:42.730Z,1520537442.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:42.746Z,1520537442.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:43.111Z,1520537443.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:43.138Z,1520537443.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:43.506Z,1520537443.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:43.538Z,1520537443.538 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:43.538Z,1520537443.538 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 235
2018-03-08T19:30:43.538Z,1520537443.538 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T19:30:43.540Z,1520537443.540 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:43.540Z,1520537443.540 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 235
2018-03-08T19:30:43.541Z,1520537443.541 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T19:30:43.542Z,1520537443.542 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:43.542Z,1520537443.542 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 235
2018-03-08T19:30:43.542Z,1520537443.542 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T19:30:43.555Z,1520537443.555 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T19:30:43.555Z,1520537443.555 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T19:30:43.555Z,1520537443.555 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T19:30:43.925Z,1520537443.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:43.968Z,1520537443.968 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T19:30:43.968Z,1520537443.968 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 235
2018-03-08T19:30:43.977Z,1520537443.977 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T19:30:43.977Z,1520537443.977 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 235
2018-03-08T19:30:43.977Z,1520537443.977 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T19:30:43.978Z,1520537443.978 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 235
2018-03-08T19:30:44.329Z,1520537444.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:44.344Z,1520537444.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T19:30:44.344Z,1520537444.344 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:30:44.345Z,1520537444.345 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:30:44.345Z,1520537444.345 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T19:30:44.345Z,1520537444.345 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:30:44.346Z,1520537444.346 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:30:44.346Z,1520537444.346 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T19:30:44.347Z,1520537444.347 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:30:44.347Z,1520537444.347 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:30:44.717Z,1520537444.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:44.750Z,1520537444.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T19:30:44.751Z,1520537444.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:45.107Z,1520537445.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:45.138Z,1520537445.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T19:30:45.139Z,1520537445.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:45.511Z,1520537445.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:45.546Z,1520537445.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T19:30:45.547Z,1520537445.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:45.935Z,1520537445.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:45.950Z,1520537445.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T19:30:45.951Z,1520537445.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:46.322Z,1520537446.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:46.358Z,1520537446.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T19:30:46.359Z,1520537446.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:46.721Z,1520537446.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:46.747Z,1520537446.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T19:30:46.748Z,1520537446.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:47.108Z,1520537447.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:47.146Z,1520537447.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T19:30:47.147Z,1520537447.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:47.511Z,1520537447.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:47.550Z,1520537447.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T19:30:47.551Z,1520537447.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:47.929Z,1520537447.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:47.953Z,1520537447.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T19:30:47.954Z,1520537447.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:48.325Z,1520537448.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:48.356Z,1520537448.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T19:30:48.361Z,1520537448.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:48.729Z,1520537448.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:48.760Z,1520537448.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T19:30:48.761Z,1520537448.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:49.122Z,1520537449.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:49.137Z,1520537449.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T19:30:49.138Z,1520537449.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:49.517Z,1520537449.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:49.532Z,1520537449.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T19:30:49.533Z,1520537449.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:49.930Z,1520537449.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:49.961Z,1520537449.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T19:30:49.962Z,1520537449.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:50.326Z,1520537450.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:50.341Z,1520537450.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T19:30:50.342Z,1520537450.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:50.721Z,1520537450.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:50.737Z,1520537450.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T19:30:50.738Z,1520537450.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:51.120Z,1520537451.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:51.136Z,1520537451.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T19:30:51.137Z,1520537451.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:51.515Z,1520537451.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:51.529Z,1520537451.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T19:30:51.530Z,1520537451.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:51.920Z,1520537451.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:51.935Z,1520537451.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T19:30:51.936Z,1520537451.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:52.330Z,1520537452.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:52.345Z,1520537452.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T19:30:52.346Z,1520537452.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:52.725Z,1520537452.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:52.740Z,1520537452.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T19:30:52.741Z,1520537452.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:53.107Z,1520537453.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:53.146Z,1520537453.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T19:30:53.146Z,1520537453.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:53.510Z,1520537453.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:53.543Z,1520537453.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T19:30:53.544Z,1520537453.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:53.929Z,1520537453.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:53.948Z,1520537453.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T19:30:53.949Z,1520537453.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:54.329Z,1520537454.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:54.344Z,1520537454.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T19:30:54.345Z,1520537454.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:54.730Z,1520537454.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:54.745Z,1520537454.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T19:30:54.746Z,1520537454.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:55.107Z,1520537455.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:55.138Z,1520537455.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T19:30:55.139Z,1520537455.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:55.510Z,1520537455.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:55.546Z,1520537455.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T19:30:55.547Z,1520537455.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:55.922Z,1520537455.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:55.949Z,1520537455.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T19:30:55.950Z,1520537455.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:56.334Z,1520537456.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:56.349Z,1520537456.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T19:30:56.350Z,1520537456.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:56.734Z,1520537456.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:56.749Z,1520537456.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T19:30:56.750Z,1520537456.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:57.107Z,1520537457.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:57.150Z,1520537457.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T19:30:57.151Z,1520537457.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:57.515Z,1520537457.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:57.546Z,1520537457.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T19:30:57.547Z,1520537457.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:57.922Z,1520537457.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:57.949Z,1520537457.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T19:30:57.950Z,1520537457.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:58.321Z,1520537458.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:58.353Z,1520537458.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T19:30:58.353Z,1520537458.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:58.721Z,1520537458.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:58.754Z,1520537458.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T19:30:58.755Z,1520537458.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:59.107Z,1520537459.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:59.142Z,1520537459.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T19:30:59.143Z,1520537459.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:59.511Z,1520537459.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:59.526Z,1520537459.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T19:30:59.527Z,1520537459.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:30:59.922Z,1520537459.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:30:59.949Z,1520537459.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T19:30:59.950Z,1520537459.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:00.339Z,1520537460.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:00.358Z,1520537460.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T19:31:00.359Z,1520537460.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:00.721Z,1520537460.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:00.749Z,1520537460.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T19:31:00.750Z,1520537460.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:01.111Z,1520537461.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:01.127Z,1520537461.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T19:31:01.128Z,1520537461.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:01.514Z,1520537461.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:01.531Z,1520537461.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T19:31:01.531Z,1520537461.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:01.925Z,1520537461.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:01.959Z,1520537461.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T19:31:01.960Z,1520537461.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:02.329Z,1520537462.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:02.358Z,1520537462.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T19:31:02.359Z,1520537462.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:02.726Z,1520537462.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:02.757Z,1520537462.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T19:31:02.758Z,1520537462.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:03.116Z,1520537463.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:03.130Z,1520537463.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T19:31:03.131Z,1520537463.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:03.518Z,1520537463.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:03.533Z,1520537463.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T19:31:03.534Z,1520537463.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:03.921Z,1520537463.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:03.937Z,1520537463.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:04.325Z,1520537464.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:04.340Z,1520537464.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:04.720Z,1520537464.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:04.764Z,1520537464.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:05.114Z,1520537465.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:05.133Z,1520537465.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:05.520Z,1520537465.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:05.535Z,1520537465.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:05.921Z,1520537465.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:05.937Z,1520537465.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:06.325Z,1520537466.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:06.340Z,1520537466.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:06.721Z,1520537466.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:06.742Z,1520537466.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:07.117Z,1520537467.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:07.132Z,1520537467.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:07.515Z,1520537467.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:07.531Z,1520537467.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:07.925Z,1520537467.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:07.940Z,1520537467.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:08.325Z,1520537468.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:08.340Z,1520537468.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:08.721Z,1520537468.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:08.737Z,1520537468.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:09.113Z,1520537469.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:09.140Z,1520537469.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:09.509Z,1520537469.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:09.534Z,1520537469.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:09.925Z,1520537469.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:09.946Z,1520537469.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:10.328Z,1520537470.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:10.344Z,1520537470.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:10.728Z,1520537470.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:10.744Z,1520537470.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:11.115Z,1520537471.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:11.134Z,1520537471.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:11.515Z,1520537471.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:11.534Z,1520537471.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:11.928Z,1520537471.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:11.943Z,1520537471.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:12.329Z,1520537472.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:12.344Z,1520537472.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:12.729Z,1520537472.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:12.750Z,1520537472.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:13.120Z,1520537473.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:13.135Z,1520537473.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:13.511Z,1520537473.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:13.533Z,1520537473.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:13.928Z,1520537473.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:13.944Z,1520537473.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:14.328Z,1520537474.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:14.344Z,1520537474.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:14.728Z,1520537474.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:14.743Z,1520537474.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:15.120Z,1520537475.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:15.135Z,1520537475.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:15.519Z,1520537475.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:15.538Z,1520537475.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:15.925Z,1520537475.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:15.940Z,1520537475.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:16.328Z,1520537476.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:16.343Z,1520537476.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:16.728Z,1520537476.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:16.744Z,1520537476.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:17.117Z,1520537477.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:17.132Z,1520537477.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:17.515Z,1520537477.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:17.538Z,1520537477.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:17.929Z,1520537477.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:17.951Z,1520537477.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:18.328Z,1520537478.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:18.350Z,1520537478.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:18.729Z,1520537478.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:18.750Z,1520537478.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:19.118Z,1520537479.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:19.138Z,1520537479.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:19.515Z,1520537479.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:19.534Z,1520537479.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:19.929Z,1520537479.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:19.944Z,1520537479.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:20.328Z,1520537480.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:20.343Z,1520537480.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:20.734Z,1520537480.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:20.749Z,1520537480.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:21.116Z,1520537481.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:21.131Z,1520537481.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:21.519Z,1520537481.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:21.534Z,1520537481.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:21.929Z,1520537481.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:21.944Z,1520537481.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:22.328Z,1520537482.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:22.343Z,1520537482.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:22.728Z,1520537482.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:22.744Z,1520537482.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:23.120Z,1520537483.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:23.135Z,1520537483.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:23.516Z,1520537483.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:23.531Z,1520537483.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:23.929Z,1520537483.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:23.945Z,1520537483.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:24.328Z,1520537484.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:24.343Z,1520537484.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:24.730Z,1520537484.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:24.745Z,1520537484.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:27.826Z,1520537487.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:27.847Z,1520537487.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:27.941Z,1520537487.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:27.957Z,1520537487.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:28.337Z,1520537488.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:28.358Z,1520537488.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:28.730Z,1520537488.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:28.746Z,1520537488.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:29.136Z,1520537489.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:29.158Z,1520537489.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:29.525Z,1520537489.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:29.540Z,1520537489.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:29.927Z,1520537489.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:29.943Z,1520537489.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:30.323Z,1520537490.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:30.343Z,1520537490.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:30.723Z,1520537490.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:30.742Z,1520537490.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:31.127Z,1520537491.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:31.146Z,1520537491.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:31.536Z,1520537491.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:31.552Z,1520537491.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:31.936Z,1520537491.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:31.951Z,1520537491.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:32.328Z,1520537492.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:32.343Z,1520537492.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:32.723Z,1520537492.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:32.743Z,1520537492.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:33.123Z,1520537493.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:33.142Z,1520537493.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:33.512Z,1520537493.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:33.544Z,1520537493.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:33.937Z,1520537493.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:33.958Z,1520537493.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:34.339Z,1520537494.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:34.354Z,1520537494.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:34.729Z,1520537494.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:34.744Z,1520537494.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:35.115Z,1520537495.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:35.146Z,1520537495.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:35.528Z,1520537495.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:35.550Z,1520537495.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:35.934Z,1520537495.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:35.949Z,1520537495.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:36.341Z,1520537496.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:36.356Z,1520537496.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:36.737Z,1520537496.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:36.752Z,1520537496.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:37.129Z,1520537497.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:37.144Z,1520537497.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:37.515Z,1520537497.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:37.544Z,1520537497.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:37.942Z,1520537497.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:37.957Z,1520537497.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:38.342Z,1520537498.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:38.358Z,1520537498.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:38.738Z,1520537498.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:38.753Z,1520537498.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:39.116Z,1520537499.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:39.143Z,1520537499.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:39.512Z,1520537499.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:39.551Z,1520537499.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:39.938Z,1520537499.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:39.958Z,1520537499.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:40.337Z,1520537500.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:40.352Z,1520537500.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:40.736Z,1520537500.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:40.751Z,1520537500.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:41.114Z,1520537501.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:41.151Z,1520537501.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:41.528Z,1520537501.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:41.593Z,1520537501.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:41.940Z,1520537501.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:41.976Z,1520537501.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:42.347Z,1520537502.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:42.362Z,1520537502.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:42.727Z,1520537502.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:42.762Z,1520537502.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:43.116Z,1520537503.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:43.143Z,1520537503.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:43.525Z,1520537503.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:43.544Z,1520537503.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:43.936Z,1520537503.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:43.951Z,1520537503.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:44.334Z,1520537504.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:44.374Z,1520537504.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:44.748Z,1520537504.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:44.789Z,1520537504.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:45.125Z,1520537505.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:45.140Z,1520537505.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:45.526Z,1520537505.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:45.547Z,1520537505.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:45.937Z,1520537505.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:45.958Z,1520537505.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:46.337Z,1520537506.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:46.352Z,1520537506.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:46.731Z,1520537506.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:46.759Z,1520537506.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:47.120Z,1520537507.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:47.155Z,1520537507.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:47.518Z,1520537507.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:47.533Z,1520537507.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:47.929Z,1520537507.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:47.957Z,1520537507.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:48.333Z,1520537508.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:48.359Z,1520537508.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:48.725Z,1520537508.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:48.759Z,1520537508.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:49.119Z,1520537509.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:49.135Z,1520537509.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:49.519Z,1520537509.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:49.534Z,1520537509.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:49.929Z,1520537509.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:49.962Z,1520537509.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:50.329Z,1520537510.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:50.360Z,1520537510.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:50.733Z,1520537510.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:50.769Z,1520537510.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:51.120Z,1520537511.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:51.135Z,1520537511.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:51.519Z,1520537511.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:51.535Z,1520537511.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:51.933Z,1520537511.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:51.961Z,1520537511.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:52.337Z,1520537512.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:52.352Z,1520537512.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:52.725Z,1520537512.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:52.740Z,1520537512.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:53.125Z,1520537513.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:53.140Z,1520537513.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:53.522Z,1520537513.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:53.537Z,1520537513.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:53.926Z,1520537513.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:53.942Z,1520537513.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:54.329Z,1520537514.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:54.345Z,1520537514.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:54.737Z,1520537514.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:54.752Z,1520537514.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:55.124Z,1520537515.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:55.140Z,1520537515.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:55.522Z,1520537515.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:55.537Z,1520537515.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:55.937Z,1520537515.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:55.974Z,1520537515.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:56.325Z,1520537516.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:56.341Z,1520537516.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:56.729Z,1520537516.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:56.745Z,1520537516.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:57.122Z,1520537517.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:57.137Z,1520537517.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:57.519Z,1520537517.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:57.542Z,1520537517.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:57.932Z,1520537517.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:57.947Z,1520537517.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:58.332Z,1520537518.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:58.347Z,1520537518.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:58.359Z,1520537518.359 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T19:31:58.733Z,1520537518.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:58.749Z,1520537518.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:59.123Z,1520537519.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:59.138Z,1520537519.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:59.523Z,1520537519.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:59.542Z,1520537519.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:31:59.933Z,1520537519.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:31:59.948Z,1520537519.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:00.333Z,1520537520.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:00.349Z,1520537520.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:00.732Z,1520537520.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:00.754Z,1520537520.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:01.122Z,1520537521.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:01.137Z,1520537521.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:01.520Z,1520537521.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:01.548Z,1520537521.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:01.937Z,1520537521.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:01.952Z,1520537521.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:02.342Z,1520537522.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:02.357Z,1520537522.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:02.737Z,1520537522.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:02.753Z,1520537522.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:03.115Z,1520537523.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:03.147Z,1520537523.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:03.515Z,1520537523.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:03.547Z,1520537523.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:03.938Z,1520537523.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:03.953Z,1520537523.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:04.341Z,1520537524.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:04.356Z,1520537524.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:04.736Z,1520537524.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:04.751Z,1520537524.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:05.124Z,1520537525.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:05.150Z,1520537525.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:05.515Z,1520537525.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:05.551Z,1520537525.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:05.936Z,1520537525.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:05.969Z,1520537525.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:06.342Z,1520537526.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:06.357Z,1520537526.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:06.734Z,1520537526.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:06.754Z,1520537526.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:07.115Z,1520537527.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:07.153Z,1520537527.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:07.515Z,1520537527.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:07.551Z,1520537527.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:07.934Z,1520537527.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:07.949Z,1520537527.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:08.344Z,1520537528.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:08.359Z,1520537528.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:08.738Z,1520537528.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:08.759Z,1520537528.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:09.115Z,1520537529.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:09.148Z,1520537529.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:09.513Z,1520537529.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:09.555Z,1520537529.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:09.921Z,1520537529.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:09.959Z,1520537529.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:10.342Z,1520537530.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:10.357Z,1520537530.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:10.734Z,1520537530.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:10.750Z,1520537530.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:11.119Z,1520537531.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:11.142Z,1520537531.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:11.515Z,1520537531.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:11.549Z,1520537531.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:11.938Z,1520537531.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:11.953Z,1520537531.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:12.341Z,1520537532.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:12.357Z,1520537532.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:12.737Z,1520537532.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:12.752Z,1520537532.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:13.117Z,1520537533.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:13.147Z,1520537533.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:13.519Z,1520537533.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:13.545Z,1520537533.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:13.938Z,1520537533.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:13.953Z,1520537533.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:14.321Z,1520537534.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:14.344Z,1520537534.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:14.742Z,1520537534.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:14.757Z,1520537534.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:15.116Z,1520537535.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:15.149Z,1520537535.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:15.513Z,1520537535.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:15.528Z,1520537535.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:15.933Z,1520537535.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:15.960Z,1520537535.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:16.346Z,1520537536.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:16.361Z,1520537536.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:16.721Z,1520537536.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:16.760Z,1520537536.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:17.124Z,1520537537.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:17.156Z,1520537537.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:17.522Z,1520537537.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:17.538Z,1520537537.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:17.928Z,1520537537.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:17.961Z,1520537537.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:18.333Z,1520537538.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:18.365Z,1520537538.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:18.733Z,1520537538.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:18.766Z,1520537538.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:19.124Z,1520537539.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:19.139Z,1520537539.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:19.520Z,1520537539.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:19.536Z,1520537539.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:19.936Z,1520537539.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:19.971Z,1520537539.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:20.321Z,1520537540.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:20.336Z,1520537540.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:20.733Z,1520537540.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:20.757Z,1520537540.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:21.123Z,1520537541.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:21.138Z,1520537541.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:21.521Z,1520537541.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:21.537Z,1520537541.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:21.929Z,1520537541.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:21.945Z,1520537541.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:22.332Z,1520537542.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:22.346Z,1520537542.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:22.727Z,1520537542.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:22.744Z,1520537542.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:23.127Z,1520537543.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:23.142Z,1520537543.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:23.524Z,1520537543.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:23.539Z,1520537543.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:23.542Z,1520537543.542 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T19:32:23.542Z,1520537543.542 [Default:CheckIn:C.Wait] Stopped
2018-03-08T19:32:23.542Z,1520537543.542 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T19:32:23.542Z,1520537543.542 [Default:CheckIn:D] Running Loop=1
2018-03-08T19:32:23.933Z,1520537543.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:23.949Z,1520537543.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:23.952Z,1520537543.952 [Default:CheckIn:D] Stopped
2018-03-08T19:32:23.952Z,1520537543.952 [Default:CheckIn:E] Running Loop=1
2018-03-08T19:32:24.333Z,1520537544.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:24.349Z,1520537544.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:24.352Z,1520537544.352 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 706.652409 min 
2018-03-08T19:32:24.352Z,1520537544.352 [Default:CheckIn:E] Stopped
2018-03-08T19:32:24.352Z,1520537544.352 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T19:32:24.352Z,1520537544.352 [Default:CheckIn] Stopped
2018-03-08T19:32:24.353Z,1520537544.353 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T19:32:24.353Z,1520537544.353 [Default:CheckIn](INFO): Running loop #69
2018-03-08T19:32:24.353Z,1520537544.353 [Default:CheckIn] Running Loop=69
2018-03-08T19:32:24.353Z,1520537544.353 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T19:32:24.353Z,1520537544.353 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T19:32:24.730Z,1520537544.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:24.759Z,1520537544.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:27.829Z,1520537547.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:27.844Z,1520537547.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:27.949Z,1520537547.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:27.964Z,1520537547.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:28.337Z,1520537548.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:28.358Z,1520537548.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:28.737Z,1520537548.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:28.752Z,1520537548.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:29.136Z,1520537549.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:29.152Z,1520537549.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:29.511Z,1520537549.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:29.542Z,1520537549.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:29.908Z,1520537549.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:29.936Z,1520537549.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:30.316Z,1520537550.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:30.343Z,1520537550.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:30.711Z,1520537550.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:30.747Z,1520537550.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:31.131Z,1520537551.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:31.146Z,1520537551.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:31.529Z,1520537551.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:31.551Z,1520537551.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:31.925Z,1520537551.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:31.949Z,1520537551.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:32.307Z,1520537552.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:32.338Z,1520537552.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:32.715Z,1520537552.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:32.746Z,1520537552.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:33.112Z,1520537553.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:33.148Z,1520537553.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:33.512Z,1520537553.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:33.528Z,1520537553.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:33.929Z,1520537553.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:33.955Z,1520537553.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:34.341Z,1520537554.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:34.358Z,1520537554.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:34.725Z,1520537554.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:34.752Z,1520537554.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:35.118Z,1520537555.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:35.145Z,1520537555.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:35.519Z,1520537555.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:35.535Z,1520537555.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:35.932Z,1520537555.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:35.961Z,1520537555.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:36.329Z,1520537556.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:36.360Z,1520537556.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:36.733Z,1520537556.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:36.765Z,1520537556.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:37.119Z,1520537557.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:37.136Z,1520537557.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:37.516Z,1520537557.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:37.535Z,1520537557.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:37.933Z,1520537557.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:37.964Z,1520537557.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:38.329Z,1520537558.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:38.344Z,1520537558.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:38.721Z,1520537558.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:38.737Z,1520537558.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:39.119Z,1520537559.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:39.134Z,1520537559.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:39.523Z,1520537559.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:39.538Z,1520537559.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:39.927Z,1520537559.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:39.942Z,1520537559.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:40.329Z,1520537560.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:40.345Z,1520537560.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:40.726Z,1520537560.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:40.741Z,1520537560.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:41.125Z,1520537561.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:41.140Z,1520537561.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:41.522Z,1520537561.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:41.538Z,1520537561.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:41.926Z,1520537561.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:41.942Z,1520537561.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:42.325Z,1520537562.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:42.341Z,1520537562.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:42.725Z,1520537562.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:42.741Z,1520537562.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:43.125Z,1520537563.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:43.140Z,1520537563.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:43.524Z,1520537563.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:43.539Z,1520537563.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:43.926Z,1520537563.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:43.942Z,1520537563.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:44.326Z,1520537564.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:44.341Z,1520537564.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:44.730Z,1520537564.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:44.750Z,1520537564.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:45.122Z,1520537565.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:45.138Z,1520537565.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:45.520Z,1520537565.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:45.535Z,1520537565.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:45.928Z,1520537565.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:45.944Z,1520537565.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:46.328Z,1520537566.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:46.343Z,1520537566.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:46.729Z,1520537566.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:46.745Z,1520537566.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:47.120Z,1520537567.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:47.135Z,1520537567.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:47.523Z,1520537567.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:47.538Z,1520537567.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:47.929Z,1520537567.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:47.944Z,1520537567.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:48.329Z,1520537568.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:48.344Z,1520537568.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:48.728Z,1520537568.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:48.744Z,1520537568.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:49.121Z,1520537569.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:49.137Z,1520537569.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:49.520Z,1520537569.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:49.536Z,1520537569.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:49.925Z,1520537569.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:49.940Z,1520537569.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:50.328Z,1520537570.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:50.343Z,1520537570.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:50.730Z,1520537570.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:50.745Z,1520537570.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:51.120Z,1520537571.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:51.135Z,1520537571.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:51.525Z,1520537571.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:51.541Z,1520537571.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:51.932Z,1520537571.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:51.947Z,1520537571.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:52.333Z,1520537572.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:52.348Z,1520537572.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:52.734Z,1520537572.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:52.749Z,1520537572.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:53.125Z,1520537573.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:53.140Z,1520537573.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:53.517Z,1520537573.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:53.539Z,1520537573.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:53.934Z,1520537573.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:53.949Z,1520537573.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:54.333Z,1520537574.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:54.349Z,1520537574.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:54.733Z,1520537574.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:54.748Z,1520537574.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:55.125Z,1520537575.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:55.141Z,1520537575.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:55.517Z,1520537575.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:55.537Z,1520537575.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:55.929Z,1520537575.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:55.944Z,1520537575.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:56.333Z,1520537576.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:56.348Z,1520537576.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:56.731Z,1520537576.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:56.746Z,1520537576.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:57.120Z,1520537577.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:57.135Z,1520537577.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:57.524Z,1520537577.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:57.539Z,1520537577.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:57.928Z,1520537577.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:57.950Z,1520537577.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:58.332Z,1520537578.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:58.347Z,1520537578.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:58.733Z,1520537578.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:58.748Z,1520537578.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:59.124Z,1520537579.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:59.146Z,1520537579.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:59.522Z,1520537579.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:59.537Z,1520537579.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:32:59.933Z,1520537579.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:32:59.949Z,1520537579.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:00.332Z,1520537580.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:00.348Z,1520537580.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:00.723Z,1520537580.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:00.748Z,1520537580.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:01.122Z,1520537581.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:01.137Z,1520537581.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:01.531Z,1520537581.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:01.546Z,1520537581.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:01.933Z,1520537581.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:01.948Z,1520537581.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:02.337Z,1520537582.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:02.352Z,1520537582.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:02.733Z,1520537582.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:02.748Z,1520537582.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:03.112Z,1520537583.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:03.144Z,1520537583.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:03.524Z,1520537583.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:03.539Z,1520537583.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:03.934Z,1520537583.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:03.949Z,1520537583.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:04.336Z,1520537584.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:04.351Z,1520537584.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:04.737Z,1520537584.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:04.752Z,1520537584.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:05.112Z,1520537585.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:05.147Z,1520537585.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:05.514Z,1520537585.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:05.541Z,1520537585.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:05.939Z,1520537585.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:05.954Z,1520537585.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:06.329Z,1520537586.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:06.351Z,1520537586.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:06.730Z,1520537586.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:06.745Z,1520537586.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:07.112Z,1520537587.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:07.182Z,1520537587.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:07.514Z,1520537587.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:07.541Z,1520537587.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:07.925Z,1520537587.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:07.950Z,1520537587.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:08.339Z,1520537588.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:08.354Z,1520537588.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:08.733Z,1520537588.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:08.749Z,1520537588.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:09.111Z,1520537589.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:09.143Z,1520537589.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:09.511Z,1520537589.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:09.543Z,1520537589.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:09.935Z,1520537589.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:09.950Z,1520537589.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:10.321Z,1520537590.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:10.348Z,1520537590.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:10.739Z,1520537590.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:10.754Z,1520537590.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:11.111Z,1520537591.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:11.146Z,1520537591.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:11.506Z,1520537591.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:11.549Z,1520537591.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:11.934Z,1520537591.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:11.951Z,1520537591.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:12.333Z,1520537592.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:12.348Z,1520537592.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:12.723Z,1520537592.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:12.766Z,1520537592.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:13.146Z,1520537593.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:13.161Z,1520537593.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:13.511Z,1520537593.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:13.546Z,1520537593.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:13.921Z,1520537593.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:13.948Z,1520537593.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:14.339Z,1520537594.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:14.354Z,1520537594.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:14.734Z,1520537594.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:14.750Z,1520537594.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:15.111Z,1520537595.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:15.147Z,1520537595.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:15.515Z,1520537595.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:15.548Z,1520537595.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:15.933Z,1520537595.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:15.955Z,1520537595.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:16.321Z,1520537596.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:16.347Z,1520537596.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:16.738Z,1520537596.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:16.754Z,1520537596.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:17.111Z,1520537597.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:17.147Z,1520537597.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:17.515Z,1520537597.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:17.555Z,1520537597.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:17.939Z,1520537597.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:17.954Z,1520537597.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:18.325Z,1520537598.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:18.358Z,1520537598.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:18.724Z,1520537598.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:18.751Z,1520537598.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:19.116Z,1520537599.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:19.147Z,1520537599.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:19.514Z,1520537599.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:19.555Z,1520537599.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:19.929Z,1520537599.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:19.954Z,1520537599.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:20.329Z,1520537600.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:20.362Z,1520537600.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:20.729Z,1520537600.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:20.754Z,1520537600.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:21.116Z,1520537601.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:21.161Z,1520537601.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:21.507Z,1520537601.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:21.523Z,1520537601.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:21.929Z,1520537601.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:21.952Z,1520537601.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:22.329Z,1520537602.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:22.354Z,1520537602.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:22.726Z,1520537602.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:22.757Z,1520537602.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:23.118Z,1520537603.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:23.133Z,1520537603.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:23.519Z,1520537603.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:23.535Z,1520537603.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:23.930Z,1520537603.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:23.962Z,1520537603.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:24.331Z,1520537604.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:24.361Z,1520537604.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:24.732Z,1520537604.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:24.757Z,1520537604.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:25.117Z,1520537605.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:25.133Z,1520537605.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:28.217Z,1520537608.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:28.238Z,1520537608.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:28.337Z,1520537608.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:28.373Z,1520537608.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:28.729Z,1520537608.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:28.744Z,1520537608.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:29.126Z,1520537609.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:29.141Z,1520537609.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:29.507Z,1520537609.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:29.530Z,1520537609.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:29.916Z,1520537609.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:29.931Z,1520537609.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:30.318Z,1520537610.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:30.333Z,1520537610.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:30.709Z,1520537610.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:30.736Z,1520537610.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:31.130Z,1520537611.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:31.150Z,1520537611.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:31.529Z,1520537611.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:31.544Z,1520537611.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:31.926Z,1520537611.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:31.941Z,1520537611.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:32.319Z,1520537612.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:32.339Z,1520537612.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:32.716Z,1520537612.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:32.738Z,1520537612.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:33.113Z,1520537613.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:33.130Z,1520537613.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:33.507Z,1520537613.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:33.526Z,1520537613.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:33.920Z,1520537613.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:33.935Z,1520537613.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:34.342Z,1520537614.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:34.373Z,1520537614.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:34.721Z,1520537614.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:34.737Z,1520537614.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:35.104Z,1520537615.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:35.119Z,1520537615.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:35.507Z,1520537615.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:35.526Z,1520537615.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:35.922Z,1520537615.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:35.938Z,1520537615.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:36.320Z,1520537616.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:36.335Z,1520537616.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:36.713Z,1520537616.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:36.729Z,1520537616.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:37.129Z,1520537617.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:37.166Z,1520537617.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:37.507Z,1520537617.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:37.534Z,1520537617.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:37.917Z,1520537617.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:37.934Z,1520537617.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:38.329Z,1520537618.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:38.344Z,1520537618.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:38.721Z,1520537618.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:38.742Z,1520537618.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:39.107Z,1520537619.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:39.130Z,1520537619.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:39.519Z,1520537619.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:39.535Z,1520537619.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:39.915Z,1520537619.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:39.930Z,1520537619.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:40.324Z,1520537620.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:40.347Z,1520537620.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:40.725Z,1520537620.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:40.740Z,1520537620.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:41.124Z,1520537621.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:41.139Z,1520537621.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:41.513Z,1520537621.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:41.528Z,1520537621.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:41.917Z,1520537621.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:41.947Z,1520537621.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:42.308Z,1520537622.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:42.343Z,1520537622.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:42.719Z,1520537622.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:42.743Z,1520537622.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:43.128Z,1520537623.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:43.152Z,1520537623.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:43.523Z,1520537623.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:43.555Z,1520537623.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:43.917Z,1520537623.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:43.943Z,1520537623.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:44.314Z,1520537624.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:44.354Z,1520537624.354 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:44.355Z,1520537624.355 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 236
2018-03-08T19:33:44.355Z,1520537624.355 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T19:33:44.357Z,1520537624.357 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:44.357Z,1520537624.357 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 236
2018-03-08T19:33:44.357Z,1520537624.357 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T19:33:44.359Z,1520537624.359 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:44.359Z,1520537624.359 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 236
2018-03-08T19:33:44.359Z,1520537624.359 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T19:33:44.371Z,1520537624.371 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T19:33:44.371Z,1520537624.371 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T19:33:44.371Z,1520537624.371 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T19:33:44.739Z,1520537624.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:44.778Z,1520537624.778 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T19:33:44.778Z,1520537624.778 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 236
2018-03-08T19:33:44.778Z,1520537624.778 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T19:33:44.778Z,1520537624.778 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 236
2018-03-08T19:33:44.779Z,1520537624.779 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T19:33:44.779Z,1520537624.779 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 236
2018-03-08T19:33:45.129Z,1520537625.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:45.168Z,1520537625.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T19:33:45.168Z,1520537625.168 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:33:45.173Z,1520537625.173 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:33:45.173Z,1520537625.173 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T19:33:45.174Z,1520537625.174 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:33:45.174Z,1520537625.174 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:33:45.174Z,1520537625.174 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T19:33:45.175Z,1520537625.175 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:33:45.175Z,1520537625.175 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:33:45.511Z,1520537625.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:45.533Z,1520537625.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T19:33:45.534Z,1520537625.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:45.933Z,1520537625.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:45.986Z,1520537625.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T19:33:45.987Z,1520537625.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:46.329Z,1520537626.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:46.350Z,1520537626.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T19:33:46.351Z,1520537626.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:46.725Z,1520537626.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:46.740Z,1520537626.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T19:33:46.741Z,1520537626.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:47.108Z,1520537627.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:47.143Z,1520537627.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T19:33:47.144Z,1520537627.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:47.504Z,1520537627.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:47.538Z,1520537627.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T19:33:47.539Z,1520537627.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:47.925Z,1520537627.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:47.940Z,1520537627.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T19:33:47.941Z,1520537627.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:48.331Z,1520537628.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:48.345Z,1520537628.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T19:33:48.346Z,1520537628.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:48.721Z,1520537628.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:48.736Z,1520537628.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T19:33:48.737Z,1520537628.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:49.107Z,1520537629.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:49.133Z,1520537629.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T19:33:49.134Z,1520537629.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:49.507Z,1520537629.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:49.542Z,1520537629.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T19:33:49.542Z,1520537629.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:49.930Z,1520537629.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:49.945Z,1520537629.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T19:33:49.945Z,1520537629.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:50.330Z,1520537630.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:50.345Z,1520537630.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T19:33:50.346Z,1520537630.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:50.734Z,1520537630.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:50.749Z,1520537630.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T19:33:50.750Z,1520537630.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:51.107Z,1520537631.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:51.138Z,1520537631.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T19:33:51.139Z,1520537631.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:51.507Z,1520537631.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:51.538Z,1520537631.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T19:33:51.539Z,1520537631.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:51.929Z,1520537631.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:51.945Z,1520537631.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T19:33:51.946Z,1520537631.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:52.327Z,1520537632.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:52.348Z,1520537632.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T19:33:52.349Z,1520537632.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:52.729Z,1520537632.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:52.744Z,1520537632.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T19:33:52.745Z,1520537632.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:53.109Z,1520537633.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:53.140Z,1520537633.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T19:33:53.145Z,1520537633.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:53.511Z,1520537633.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:53.542Z,1520537633.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T19:33:53.543Z,1520537633.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:53.917Z,1520537633.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:53.943Z,1520537633.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T19:33:53.944Z,1520537633.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:54.329Z,1520537634.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:54.350Z,1520537634.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T19:33:54.351Z,1520537634.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:54.713Z,1520537634.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:54.739Z,1520537634.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T19:33:54.740Z,1520537634.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:55.108Z,1520537635.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:55.139Z,1520537635.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T19:33:55.140Z,1520537635.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:55.511Z,1520537635.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:55.547Z,1520537635.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T19:33:55.549Z,1520537635.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:55.917Z,1520537635.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:55.943Z,1520537635.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T19:33:55.944Z,1520537635.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:56.321Z,1520537636.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:56.354Z,1520537636.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T19:33:56.355Z,1520537636.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:56.736Z,1520537636.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:56.751Z,1520537636.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T19:33:56.752Z,1520537636.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:57.113Z,1520537637.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:57.128Z,1520537637.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T19:33:57.145Z,1520537637.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:57.514Z,1520537637.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:57.529Z,1520537637.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T19:33:57.530Z,1520537637.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:57.929Z,1520537637.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:57.955Z,1520537637.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T19:33:57.956Z,1520537637.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:58.325Z,1520537638.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:58.352Z,1520537638.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T19:33:58.357Z,1520537638.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:58.729Z,1520537638.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:58.759Z,1520537638.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T19:33:58.760Z,1520537638.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:59.115Z,1520537639.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:59.131Z,1520537639.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T19:33:59.132Z,1520537639.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:59.515Z,1520537639.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:59.529Z,1520537639.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T19:33:59.530Z,1520537639.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:33:59.922Z,1520537639.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:33:59.937Z,1520537639.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T19:33:59.938Z,1520537639.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:00.325Z,1520537640.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:00.340Z,1520537640.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T19:34:00.341Z,1520537640.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:00.721Z,1520537640.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:00.736Z,1520537640.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T19:34:00.737Z,1520537640.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:01.120Z,1520537641.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:01.135Z,1520537641.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T19:34:01.136Z,1520537641.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:01.515Z,1520537641.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:01.535Z,1520537641.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T19:34:01.536Z,1520537641.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:01.922Z,1520537641.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:01.942Z,1520537641.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T19:34:01.943Z,1520537641.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:02.322Z,1520537642.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:02.342Z,1520537642.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T19:34:02.343Z,1520537642.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:02.726Z,1520537642.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:02.741Z,1520537642.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T19:34:02.742Z,1520537642.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:03.121Z,1520537643.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:03.135Z,1520537643.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T19:34:03.137Z,1520537643.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:03.515Z,1520537643.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:03.538Z,1520537643.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T19:34:03.539Z,1520537643.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:03.925Z,1520537643.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:03.941Z,1520537643.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T19:34:03.942Z,1520537643.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:04.326Z,1520537644.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:04.341Z,1520537644.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T19:34:04.342Z,1520537644.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:04.725Z,1520537644.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:04.746Z,1520537644.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:05.120Z,1520537645.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:05.135Z,1520537645.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:05.515Z,1520537645.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:05.530Z,1520537645.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:05.924Z,1520537645.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:05.947Z,1520537645.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:06.328Z,1520537646.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:06.343Z,1520537646.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:06.730Z,1520537646.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:06.751Z,1520537646.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:07.120Z,1520537647.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:07.135Z,1520537647.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:07.520Z,1520537647.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:07.535Z,1520537647.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:07.929Z,1520537647.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:07.944Z,1520537647.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:08.328Z,1520537648.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:08.343Z,1520537648.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:08.729Z,1520537648.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:08.744Z,1520537648.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:09.119Z,1520537649.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:09.138Z,1520537649.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:09.523Z,1520537649.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:09.542Z,1520537649.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:09.929Z,1520537649.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:09.944Z,1520537649.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:10.328Z,1520537650.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:10.343Z,1520537650.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:10.726Z,1520537650.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:10.746Z,1520537650.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:11.121Z,1520537651.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:11.136Z,1520537651.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:11.521Z,1520537651.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:11.536Z,1520537651.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:11.929Z,1520537651.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:12.021Z,1520537652.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:12.329Z,1520537652.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:12.344Z,1520537652.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:12.729Z,1520537652.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:12.744Z,1520537652.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:13.112Z,1520537653.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:13.127Z,1520537653.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:13.514Z,1520537653.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:13.530Z,1520537653.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:13.929Z,1520537653.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:13.955Z,1520537653.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:14.329Z,1520537654.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:14.355Z,1520537654.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:14.725Z,1520537654.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:14.751Z,1520537654.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:15.115Z,1520537655.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:15.152Z,1520537655.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:15.511Z,1520537655.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:15.629Z,1520537655.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:15.925Z,1520537655.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:15.951Z,1520537655.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:16.329Z,1520537656.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:16.355Z,1520537656.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:16.729Z,1520537656.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:16.754Z,1520537656.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:17.119Z,1520537657.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:17.156Z,1520537657.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:17.515Z,1520537657.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:17.551Z,1520537657.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:17.925Z,1520537657.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:17.958Z,1520537657.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:18.329Z,1520537658.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:18.355Z,1520537658.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:18.721Z,1520537658.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:18.756Z,1520537658.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:19.113Z,1520537659.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:19.128Z,1520537659.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:19.514Z,1520537659.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:19.529Z,1520537659.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:19.929Z,1520537659.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:19.960Z,1520537659.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:20.329Z,1520537660.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:20.361Z,1520537660.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:20.725Z,1520537660.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:20.757Z,1520537660.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:21.115Z,1520537661.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:21.130Z,1520537661.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:21.515Z,1520537661.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:21.530Z,1520537661.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:21.925Z,1520537661.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:21.940Z,1520537661.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:22.329Z,1520537662.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:22.344Z,1520537662.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:22.721Z,1520537662.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:22.737Z,1520537662.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:23.115Z,1520537663.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:23.131Z,1520537663.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:23.519Z,1520537663.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:23.538Z,1520537663.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:23.924Z,1520537663.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:23.940Z,1520537663.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:24.324Z,1520537664.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:24.339Z,1520537664.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:24.724Z,1520537664.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:24.746Z,1520537664.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:25.120Z,1520537665.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:25.135Z,1520537665.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:25.519Z,1520537665.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:25.534Z,1520537665.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:28.629Z,1520537668.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:28.651Z,1520537668.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:28.767Z,1520537668.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:28.783Z,1520537668.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:29.145Z,1520537669.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:29.177Z,1520537669.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:29.532Z,1520537669.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:29.547Z,1520537669.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:29.935Z,1520537669.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:29.955Z,1520537669.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:30.332Z,1520537670.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:30.347Z,1520537670.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:30.736Z,1520537670.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:30.751Z,1520537670.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:31.149Z,1520537671.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:31.179Z,1520537671.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:31.537Z,1520537671.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:31.554Z,1520537671.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:31.945Z,1520537671.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:31.978Z,1520537671.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:32.332Z,1520537672.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:32.347Z,1520537672.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:32.737Z,1520537672.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:32.752Z,1520537672.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:33.132Z,1520537673.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:33.147Z,1520537673.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:33.534Z,1520537673.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:33.549Z,1520537673.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:33.937Z,1520537673.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:33.952Z,1520537673.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:34.345Z,1520537674.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:34.380Z,1520537674.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:34.750Z,1520537674.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:34.779Z,1520537674.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:35.136Z,1520537675.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:35.151Z,1520537675.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:35.532Z,1520537675.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:35.560Z,1520537675.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:35.937Z,1520537675.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:35.970Z,1520537675.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:36.351Z,1520537676.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:36.366Z,1520537676.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:36.750Z,1520537676.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:36.771Z,1520537676.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:37.126Z,1520537677.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:37.162Z,1520537677.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:37.526Z,1520537677.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:37.561Z,1520537677.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:37.941Z,1520537677.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:37.968Z,1520537677.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:38.341Z,1520537678.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:38.367Z,1520537678.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:38.741Z,1520537678.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:38.770Z,1520537678.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:39.132Z,1520537679.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:39.163Z,1520537679.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:39.531Z,1520537679.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:39.571Z,1520537679.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:39.941Z,1520537679.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:39.976Z,1520537679.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:40.341Z,1520537680.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:40.372Z,1520537680.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:40.749Z,1520537680.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:40.779Z,1520537680.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:41.133Z,1520537681.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:41.148Z,1520537681.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:41.524Z,1520537681.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:41.557Z,1520537681.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:41.949Z,1520537681.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:41.979Z,1520537681.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:42.350Z,1520537682.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:42.375Z,1520537682.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:42.733Z,1520537682.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:42.751Z,1520537682.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:43.137Z,1520537683.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:43.175Z,1520537683.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:43.531Z,1520537683.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:43.547Z,1520537683.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:43.950Z,1520537683.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:43.980Z,1520537683.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:44.349Z,1520537684.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:44.379Z,1520537684.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:44.745Z,1520537684.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:44.781Z,1520537684.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:45.137Z,1520537685.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:45.152Z,1520537685.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:45.536Z,1520537685.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:45.551Z,1520537685.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:45.949Z,1520537685.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:45.981Z,1520537685.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:46.337Z,1520537686.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:46.359Z,1520537686.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:46.741Z,1520537686.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:46.757Z,1520537686.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:47.137Z,1520537687.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:47.152Z,1520537687.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:47.528Z,1520537687.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:47.551Z,1520537687.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:47.941Z,1520537687.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:47.957Z,1520537687.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:48.345Z,1520537688.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:48.360Z,1520537688.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:48.735Z,1520537688.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:48.767Z,1520537688.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:49.141Z,1520537689.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:49.156Z,1520537689.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:49.536Z,1520537689.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:49.551Z,1520537689.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:49.945Z,1520537689.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:49.961Z,1520537689.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:50.344Z,1520537690.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:50.359Z,1520537690.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:50.745Z,1520537690.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:50.766Z,1520537690.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:51.134Z,1520537691.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:51.150Z,1520537691.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:51.531Z,1520537691.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:51.566Z,1520537691.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:51.945Z,1520537691.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:51.961Z,1520537691.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:52.346Z,1520537692.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:52.367Z,1520537692.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:52.744Z,1520537692.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:52.763Z,1520537692.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:53.132Z,1520537693.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:53.147Z,1520537693.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:53.529Z,1520537693.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:53.558Z,1520537693.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:53.949Z,1520537693.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:53.967Z,1520537693.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:54.348Z,1520537694.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:54.363Z,1520537694.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:54.738Z,1520537694.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:54.765Z,1520537694.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:55.139Z,1520537695.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:55.159Z,1520537695.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:55.523Z,1520537695.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:55.551Z,1520537695.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:55.950Z,1520537695.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:55.970Z,1520537695.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:56.352Z,1520537696.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:56.374Z,1520537696.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:56.750Z,1520537696.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:56.765Z,1520537696.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:57.139Z,1520537697.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:57.155Z,1520537697.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:57.526Z,1520537697.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:57.558Z,1520537697.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:57.950Z,1520537697.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:57.966Z,1520537697.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:58.352Z,1520537698.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:58.374Z,1520537698.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:58.749Z,1520537698.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:58.770Z,1520537698.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:59.140Z,1520537699.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:59.155Z,1520537699.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:59.524Z,1520537699.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:59.559Z,1520537699.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:34:59.949Z,1520537699.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:34:59.970Z,1520537699.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:00.352Z,1520537700.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:00.367Z,1520537700.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:00.748Z,1520537700.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:00.775Z,1520537700.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:01.131Z,1520537701.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:01.158Z,1520537701.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:01.530Z,1520537701.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:01.559Z,1520537701.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:01.949Z,1520537701.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:01.970Z,1520537701.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:02.349Z,1520537702.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:02.371Z,1520537702.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:02.749Z,1520537702.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:02.765Z,1520537702.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:03.131Z,1520537703.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:03.158Z,1520537703.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:03.527Z,1520537703.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:03.554Z,1520537703.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:03.943Z,1520537703.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:03.974Z,1520537703.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:04.352Z,1520537704.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:04.367Z,1520537704.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:04.737Z,1520537704.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:04.764Z,1520537704.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:05.127Z,1520537705.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:05.163Z,1520537705.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:05.521Z,1520537705.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:05.536Z,1520537705.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:05.937Z,1520537705.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:05.963Z,1520537705.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:06.341Z,1520537706.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:06.368Z,1520537706.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:06.737Z,1520537706.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:06.763Z,1520537706.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:07.127Z,1520537707.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:07.167Z,1520537707.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:07.530Z,1520537707.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:07.545Z,1520537707.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:07.941Z,1520537707.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:07.968Z,1520537707.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:08.345Z,1520537708.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:08.371Z,1520537708.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:08.741Z,1520537708.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:08.769Z,1520537708.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:09.130Z,1520537709.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:09.167Z,1520537709.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:09.528Z,1520537709.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:09.550Z,1520537709.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:09.945Z,1520537709.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:09.979Z,1520537709.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:10.342Z,1520537710.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:10.373Z,1520537710.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:10.749Z,1520537710.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:10.779Z,1520537710.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:11.137Z,1520537711.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:11.152Z,1520537711.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:11.531Z,1520537711.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:11.547Z,1520537711.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:11.949Z,1520537711.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:11.979Z,1520537711.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:12.350Z,1520537712.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:12.382Z,1520537712.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:12.737Z,1520537712.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:12.753Z,1520537712.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:13.137Z,1520537713.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:13.152Z,1520537713.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:13.535Z,1520537713.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:13.550Z,1520537713.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:13.949Z,1520537713.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:13.979Z,1520537713.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:14.345Z,1520537714.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:14.360Z,1520537714.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:14.749Z,1520537714.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:14.764Z,1520537714.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:15.135Z,1520537715.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:15.151Z,1520537715.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:15.534Z,1520537715.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:15.549Z,1520537715.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:15.949Z,1520537715.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:15.964Z,1520537715.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:16.349Z,1520537716.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:16.364Z,1520537716.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:16.740Z,1520537716.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:16.755Z,1520537716.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:17.140Z,1520537717.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:17.155Z,1520537717.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:17.533Z,1520537717.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:17.548Z,1520537717.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:17.941Z,1520537717.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:17.957Z,1520537717.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:18.341Z,1520537718.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:18.356Z,1520537718.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:18.741Z,1520537718.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:18.757Z,1520537718.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:19.131Z,1520537719.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:19.154Z,1520537719.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:19.537Z,1520537719.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:19.552Z,1520537719.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:19.943Z,1520537719.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:19.959Z,1520537719.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:20.346Z,1520537720.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:20.361Z,1520537720.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:20.742Z,1520537720.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:20.757Z,1520537720.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:21.139Z,1520537721.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:21.163Z,1520537721.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:21.535Z,1520537721.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:21.550Z,1520537721.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:21.942Z,1520537721.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:21.958Z,1520537721.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:22.345Z,1520537722.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:22.361Z,1520537722.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:22.741Z,1520537722.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:22.757Z,1520537722.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:23.139Z,1520537723.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:23.154Z,1520537723.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:23.527Z,1520537723.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:23.550Z,1520537723.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:23.948Z,1520537723.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:23.963Z,1520537723.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:24.348Z,1520537724.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:24.363Z,1520537724.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:24.742Z,1520537724.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:24.769Z,1520537724.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:25.137Z,1520537725.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:25.158Z,1520537725.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:25.527Z,1520537725.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:25.563Z,1520537725.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:28.643Z,1520537728.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:28.663Z,1520537728.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:28.762Z,1520537728.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:28.777Z,1520537728.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:29.157Z,1520537729.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:29.173Z,1520537729.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:29.524Z,1520537729.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:29.555Z,1520537729.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:29.943Z,1520537729.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:29.959Z,1520537729.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:30.323Z,1520537730.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:30.361Z,1520537730.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:30.724Z,1520537730.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:30.759Z,1520537730.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:31.146Z,1520537731.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:31.161Z,1520537731.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:31.544Z,1520537731.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:31.567Z,1520537731.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:31.949Z,1520537731.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:31.965Z,1520537731.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:32.330Z,1520537732.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:32.358Z,1520537732.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:32.723Z,1520537732.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:32.755Z,1520537732.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:33.131Z,1520537733.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:33.158Z,1520537733.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:33.526Z,1520537733.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:33.553Z,1520537733.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:33.944Z,1520537733.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:33.963Z,1520537733.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:34.354Z,1520537734.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:34.374Z,1520537734.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:34.749Z,1520537734.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:34.765Z,1520537734.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:35.127Z,1520537735.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:35.160Z,1520537735.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:35.524Z,1520537735.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:35.555Z,1520537735.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:35.949Z,1520537735.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:35.965Z,1520537735.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:36.337Z,1520537736.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:36.372Z,1520537736.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:36.733Z,1520537736.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:36.768Z,1520537736.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:37.135Z,1520537737.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:37.162Z,1520537737.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:37.527Z,1520537737.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:37.563Z,1520537737.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:37.950Z,1520537737.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:37.965Z,1520537737.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:38.349Z,1520537738.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:38.368Z,1520537738.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:38.750Z,1520537738.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:38.770Z,1520537738.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:39.131Z,1520537739.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:39.170Z,1520537739.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:39.527Z,1520537739.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:39.559Z,1520537739.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:39.955Z,1520537739.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:39.970Z,1520537739.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:40.354Z,1520537740.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:40.374Z,1520537740.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:40.737Z,1520537740.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:40.763Z,1520537740.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:41.128Z,1520537741.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:41.144Z,1520537741.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:41.524Z,1520537741.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:41.539Z,1520537741.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:41.945Z,1520537741.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:41.969Z,1520537741.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:42.370Z,1520537742.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:42.421Z,1520537742.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:42.778Z,1520537742.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:42.794Z,1520537742.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:43.142Z,1520537743.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:43.166Z,1520537743.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:43.538Z,1520537743.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:43.562Z,1520537743.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:43.938Z,1520537743.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:43.961Z,1520537743.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:44.326Z,1520537744.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:44.353Z,1520537744.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:44.727Z,1520537744.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:44.756Z,1520537744.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:45.146Z,1520537745.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:45.169Z,1520537745.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:45.548Z,1520537745.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:45.571Z,1520537745.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:45.953Z,1520537745.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:45.977Z,1520537745.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:46.327Z,1520537746.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:46.353Z,1520537746.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:46.743Z,1520537746.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:46.766Z,1520537746.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:47.132Z,1520537747.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:47.159Z,1520537747.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:47.524Z,1520537747.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:47.558Z,1520537747.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:47.949Z,1520537747.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:47.965Z,1520537747.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:48.350Z,1520537748.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:48.366Z,1520537748.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:48.750Z,1520537748.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:48.771Z,1520537748.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:49.131Z,1520537749.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:49.158Z,1520537749.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:49.527Z,1520537749.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:49.555Z,1520537749.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:49.937Z,1520537749.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:49.960Z,1520537749.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:50.349Z,1520537750.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:50.364Z,1520537750.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:50.751Z,1520537750.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:50.770Z,1520537750.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:51.130Z,1520537751.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:51.157Z,1520537751.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:51.527Z,1520537751.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:51.554Z,1520537751.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:51.950Z,1520537751.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:51.966Z,1520537751.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:52.343Z,1520537752.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:52.363Z,1520537752.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:52.749Z,1520537752.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:52.764Z,1520537752.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:53.128Z,1520537753.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:53.160Z,1520537753.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:53.531Z,1520537753.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:53.558Z,1520537753.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:53.945Z,1520537753.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:53.961Z,1520537753.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:54.351Z,1520537754.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:54.366Z,1520537754.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:54.745Z,1520537754.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:54.761Z,1520537754.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:55.127Z,1520537755.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:55.167Z,1520537755.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:55.527Z,1520537755.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:55.566Z,1520537755.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:55.949Z,1520537755.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:55.965Z,1520537755.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:56.351Z,1520537756.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:56.366Z,1520537756.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:56.751Z,1520537756.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:56.766Z,1520537756.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:57.128Z,1520537757.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:57.159Z,1520537757.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:57.531Z,1520537757.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:57.568Z,1520537757.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:57.941Z,1520537757.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:57.979Z,1520537757.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:58.349Z,1520537758.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:58.382Z,1520537758.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:58.745Z,1520537758.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:58.778Z,1520537758.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:59.133Z,1520537759.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:59.149Z,1520537759.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:59.535Z,1520537759.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:59.555Z,1520537759.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:35:59.949Z,1520537759.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:35:59.981Z,1520537759.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:00.346Z,1520537760.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:00.378Z,1520537760.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:00.741Z,1520537760.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:00.780Z,1520537760.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:01.135Z,1520537761.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:01.151Z,1520537761.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:01.535Z,1520537761.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:01.550Z,1520537761.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:01.949Z,1520537761.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:01.980Z,1520537761.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:02.345Z,1520537762.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:02.360Z,1520537762.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:02.748Z,1520537762.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:02.763Z,1520537762.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:03.140Z,1520537763.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:03.155Z,1520537763.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:03.539Z,1520537763.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:03.554Z,1520537763.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:03.941Z,1520537763.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:03.956Z,1520537763.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:04.345Z,1520537764.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:04.361Z,1520537764.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:04.741Z,1520537764.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:04.757Z,1520537764.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:05.140Z,1520537765.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:05.156Z,1520537765.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:05.536Z,1520537765.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:05.551Z,1520537765.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:05.945Z,1520537765.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:05.961Z,1520537765.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:06.345Z,1520537766.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:06.360Z,1520537766.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:06.742Z,1520537766.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:06.757Z,1520537766.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:07.134Z,1520537767.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:07.162Z,1520537767.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:07.540Z,1520537767.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:07.555Z,1520537767.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:07.946Z,1520537767.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:07.961Z,1520537767.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:08.344Z,1520537768.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:08.366Z,1520537768.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:08.745Z,1520537768.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:08.760Z,1520537768.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:09.139Z,1520537769.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:09.155Z,1520537769.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:09.535Z,1520537769.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:09.550Z,1520537769.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:09.945Z,1520537769.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:09.963Z,1520537769.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:10.345Z,1520537770.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:10.361Z,1520537770.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:10.744Z,1520537770.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:10.760Z,1520537770.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:11.136Z,1520537771.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:11.158Z,1520537771.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:11.539Z,1520537771.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:11.558Z,1520537771.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:11.945Z,1520537771.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:11.961Z,1520537771.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:12.344Z,1520537772.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:12.359Z,1520537772.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:12.778Z,1520537772.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:12.797Z,1520537772.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:13.135Z,1520537773.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:13.150Z,1520537773.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:13.535Z,1520537773.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:13.550Z,1520537773.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:13.927Z,1520537773.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:13.946Z,1520537773.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:14.335Z,1520537774.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:14.371Z,1520537774.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:14.732Z,1520537774.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:14.747Z,1520537774.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:15.145Z,1520537775.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:15.181Z,1520537775.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:15.545Z,1520537775.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:15.560Z,1520537775.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:15.949Z,1520537775.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:15.964Z,1520537775.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:16.336Z,1520537776.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:16.382Z,1520537776.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:16.734Z,1520537776.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:16.750Z,1520537776.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:17.134Z,1520537777.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:17.149Z,1520537777.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:17.536Z,1520537777.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:17.558Z,1520537777.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:17.949Z,1520537777.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:17.981Z,1520537777.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:18.344Z,1520537778.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:18.359Z,1520537778.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:18.744Z,1520537778.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:18.759Z,1520537778.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:19.139Z,1520537779.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:19.155Z,1520537779.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:19.540Z,1520537779.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:19.555Z,1520537779.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:19.944Z,1520537779.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:19.966Z,1520537779.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:20.345Z,1520537780.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:20.360Z,1520537780.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:20.744Z,1520537780.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:20.759Z,1520537780.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:21.141Z,1520537781.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:21.156Z,1520537781.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:21.535Z,1520537781.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:21.558Z,1520537781.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:21.944Z,1520537781.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:21.960Z,1520537781.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:22.345Z,1520537782.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:22.360Z,1520537782.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:22.744Z,1520537782.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:22.766Z,1520537782.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:23.140Z,1520537783.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:23.155Z,1520537783.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:23.539Z,1520537783.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:23.555Z,1520537783.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:23.944Z,1520537783.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:23.959Z,1520537783.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:24.344Z,1520537784.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:24.359Z,1520537784.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:24.744Z,1520537784.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:24.766Z,1520537784.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:25.139Z,1520537785.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:25.155Z,1520537785.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:25.539Z,1520537785.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:25.554Z,1520537785.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:25.945Z,1520537785.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:25.961Z,1520537785.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:29.046Z,1520537789.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:29.061Z,1520537789.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:29.170Z,1520537789.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:29.222Z,1520537789.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:29.552Z,1520537789.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:29.567Z,1520537789.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:29.951Z,1520537789.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:29.966Z,1520537789.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:30.356Z,1520537790.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:30.372Z,1520537790.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:30.749Z,1520537790.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:30.765Z,1520537790.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:31.165Z,1520537791.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:31.197Z,1520537791.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:31.553Z,1520537791.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:31.568Z,1520537791.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:31.957Z,1520537791.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:31.972Z,1520537791.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:32.351Z,1520537792.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:32.366Z,1520537792.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:32.747Z,1520537792.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:32.762Z,1520537792.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:33.153Z,1520537793.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:33.168Z,1520537793.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:33.551Z,1520537793.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:33.566Z,1520537793.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:33.961Z,1520537793.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:33.993Z,1520537793.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:34.357Z,1520537794.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:34.372Z,1520537794.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:34.757Z,1520537794.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:34.778Z,1520537794.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:35.154Z,1520537795.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:35.170Z,1520537795.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:35.550Z,1520537795.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:35.565Z,1520537795.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:35.965Z,1520537795.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:35.980Z,1520537795.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:36.353Z,1520537796.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:36.369Z,1520537796.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:36.757Z,1520537796.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:36.772Z,1520537796.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:37.152Z,1520537797.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:37.167Z,1520537797.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:37.543Z,1520537797.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:37.570Z,1520537797.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:37.957Z,1520537797.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:37.979Z,1520537797.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:38.361Z,1520537798.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:38.376Z,1520537798.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:38.757Z,1520537798.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:38.772Z,1520537798.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:39.150Z,1520537799.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:39.174Z,1520537799.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:39.555Z,1520537799.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:39.570Z,1520537799.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:39.958Z,1520537799.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:39.973Z,1520537799.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:40.362Z,1520537800.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:40.377Z,1520537800.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:40.761Z,1520537800.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:40.776Z,1520537800.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:41.155Z,1520537801.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:41.172Z,1520537801.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:41.551Z,1520537801.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:41.566Z,1520537801.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:41.960Z,1520537801.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:41.977Z,1520537801.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:42.360Z,1520537802.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:42.376Z,1520537802.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:42.761Z,1520537802.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:42.777Z,1520537802.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:43.156Z,1520537803.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:43.171Z,1520537803.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:43.544Z,1520537803.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:43.574Z,1520537803.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:43.960Z,1520537803.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:43.975Z,1520537803.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:44.361Z,1520537804.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:44.376Z,1520537804.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:44.757Z,1520537804.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:44.776Z,1520537804.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:45.152Z,1520537805.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:45.167Z,1520537805.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:45.553Z,1520537805.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:45.568Z,1520537805.568 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:45.568Z,1520537805.568 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 237
2018-03-08T19:36:45.568Z,1520537805.568 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T19:36:45.570Z,1520537805.570 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:45.570Z,1520537805.570 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 237
2018-03-08T19:36:45.570Z,1520537805.570 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T19:36:45.572Z,1520537805.572 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:45.572Z,1520537805.572 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 237
2018-03-08T19:36:45.572Z,1520537805.572 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T19:36:45.583Z,1520537805.583 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T19:36:45.583Z,1520537805.583 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T19:36:45.584Z,1520537805.584 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T19:36:45.962Z,1520537805.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:45.996Z,1520537805.996 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T19:36:45.996Z,1520537805.996 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 237
2018-03-08T19:36:46.001Z,1520537806.001 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T19:36:46.001Z,1520537806.001 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 237
2018-03-08T19:36:46.001Z,1520537806.001 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T19:36:46.001Z,1520537806.001 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 237
2018-03-08T19:36:46.362Z,1520537806.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:46.384Z,1520537806.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T19:36:46.384Z,1520537806.384 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:36:46.389Z,1520537806.389 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:36:46.389Z,1520537806.389 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T19:36:46.390Z,1520537806.390 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:36:46.390Z,1520537806.390 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:36:46.390Z,1520537806.390 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T19:36:46.391Z,1520537806.391 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:36:46.391Z,1520537806.391 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:36:46.766Z,1520537806.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:46.790Z,1520537806.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T19:36:46.791Z,1520537806.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:47.148Z,1520537807.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:47.178Z,1520537807.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T19:36:47.179Z,1520537807.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:47.546Z,1520537807.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:47.577Z,1520537807.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T19:36:47.578Z,1520537807.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:47.957Z,1520537807.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:47.990Z,1520537807.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T19:36:47.991Z,1520537807.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:48.353Z,1520537808.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:48.379Z,1520537808.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T19:36:48.381Z,1520537808.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:48.754Z,1520537808.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:48.780Z,1520537808.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T19:36:48.781Z,1520537808.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:49.143Z,1520537809.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:49.186Z,1520537809.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T19:36:49.187Z,1520537809.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:49.540Z,1520537809.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:49.556Z,1520537809.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T19:36:49.557Z,1520537809.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:49.961Z,1520537809.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:49.994Z,1520537809.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T19:36:49.995Z,1520537809.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:50.357Z,1520537810.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:50.386Z,1520537810.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T19:36:50.387Z,1520537810.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:50.753Z,1520537810.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:50.785Z,1520537810.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T19:36:50.786Z,1520537810.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:51.151Z,1520537811.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:51.186Z,1520537811.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T19:36:51.187Z,1520537811.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:51.547Z,1520537811.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:51.563Z,1520537811.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T19:36:51.563Z,1520537811.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:51.953Z,1520537811.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:51.968Z,1520537811.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T19:36:51.969Z,1520537811.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:52.361Z,1520537812.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:52.391Z,1520537812.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T19:36:52.392Z,1520537812.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:52.761Z,1520537812.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:52.789Z,1520537812.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T19:36:52.789Z,1520537812.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:53.153Z,1520537813.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:53.168Z,1520537813.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T19:36:53.169Z,1520537813.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:53.547Z,1520537813.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:53.567Z,1520537813.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T19:36:53.568Z,1520537813.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:53.965Z,1520537813.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:53.997Z,1520537813.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T19:36:53.998Z,1520537813.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:54.361Z,1520537814.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:54.376Z,1520537814.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T19:36:54.389Z,1520537814.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:54.753Z,1520537814.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:54.768Z,1520537814.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T19:36:54.769Z,1520537814.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:55.153Z,1520537815.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:55.167Z,1520537815.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T19:36:55.168Z,1520537815.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:55.544Z,1520537815.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:55.573Z,1520537815.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T19:36:55.574Z,1520537815.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:55.954Z,1520537815.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:56.022Z,1520537816.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-08T19:36:56.023Z,1520537816.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:56.365Z,1520537816.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:56.380Z,1520537816.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T19:36:56.402Z,1520537816.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:56.753Z,1520537816.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:56.768Z,1520537816.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T19:36:56.769Z,1520537816.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:57.153Z,1520537817.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:57.168Z,1520537817.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T19:36:57.169Z,1520537817.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:57.551Z,1520537817.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:57.565Z,1520537817.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T19:36:57.566Z,1520537817.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:57.965Z,1520537817.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:57.980Z,1520537817.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T19:36:58.001Z,1520537818.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:58.361Z,1520537818.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:58.376Z,1520537818.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T19:36:58.377Z,1520537818.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:58.757Z,1520537818.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:58.778Z,1520537818.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T19:36:58.779Z,1520537818.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:59.150Z,1520537819.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:59.170Z,1520537819.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T19:36:59.171Z,1520537819.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:59.555Z,1520537819.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:59.569Z,1520537819.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T19:36:59.570Z,1520537819.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:36:59.961Z,1520537819.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:36:59.976Z,1520537819.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T19:36:59.977Z,1520537819.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:00.356Z,1520537820.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:00.371Z,1520537820.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T19:37:00.371Z,1520537820.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:00.757Z,1520537820.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:00.771Z,1520537820.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T19:37:00.772Z,1520537820.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:01.156Z,1520537821.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:01.171Z,1520537821.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T19:37:01.173Z,1520537821.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:01.548Z,1520537821.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:01.562Z,1520537821.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T19:37:01.563Z,1520537821.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:01.969Z,1520537821.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:01.984Z,1520537821.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T19:37:02.001Z,1520537822.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:02.361Z,1520537822.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:02.376Z,1520537822.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T19:37:02.377Z,1520537822.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:02.761Z,1520537822.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:02.775Z,1520537822.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T19:37:02.777Z,1520537822.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:03.155Z,1520537823.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:03.178Z,1520537823.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T19:37:03.179Z,1520537823.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:03.555Z,1520537823.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:03.570Z,1520537823.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T19:37:03.571Z,1520537823.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:03.961Z,1520537823.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:03.976Z,1520537823.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T19:37:03.977Z,1520537823.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:04.359Z,1520537824.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:04.382Z,1520537824.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T19:37:04.383Z,1520537824.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:04.761Z,1520537824.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:04.776Z,1520537824.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T19:37:04.777Z,1520537824.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:05.156Z,1520537825.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:05.171Z,1520537825.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T19:37:05.171Z,1520537825.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:05.550Z,1520537825.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:05.565Z,1520537825.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T19:37:05.566Z,1520537825.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:05.962Z,1520537825.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:05.982Z,1520537825.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:06.360Z,1520537826.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:06.376Z,1520537826.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:06.760Z,1520537826.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:06.775Z,1520537826.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:07.156Z,1520537827.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:07.172Z,1520537827.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:07.551Z,1520537827.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:07.566Z,1520537827.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:07.960Z,1520537827.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:07.975Z,1520537827.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:08.361Z,1520537828.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:08.377Z,1520537828.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:08.762Z,1520537828.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:08.777Z,1520537828.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:09.151Z,1520537829.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:09.167Z,1520537829.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:09.549Z,1520537829.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:09.571Z,1520537829.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:09.960Z,1520537829.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:09.975Z,1520537829.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:10.360Z,1520537830.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:10.375Z,1520537830.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:10.762Z,1520537830.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:10.778Z,1520537830.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:11.155Z,1520537831.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:11.170Z,1520537831.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:11.555Z,1520537831.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:11.570Z,1520537831.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:11.956Z,1520537831.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:11.971Z,1520537831.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:12.356Z,1520537832.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:12.372Z,1520537832.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:12.752Z,1520537832.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:12.767Z,1520537832.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:13.161Z,1520537833.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:13.177Z,1520537833.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:13.561Z,1520537833.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:13.577Z,1520537833.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:13.961Z,1520537833.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:13.977Z,1520537833.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:14.350Z,1520537834.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:14.377Z,1520537834.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:14.756Z,1520537834.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:14.771Z,1520537834.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:15.151Z,1520537835.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:15.172Z,1520537835.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:15.549Z,1520537835.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:15.573Z,1520537835.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:15.962Z,1520537835.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:15.977Z,1520537835.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:16.366Z,1520537836.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:16.382Z,1520537836.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:16.766Z,1520537836.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:16.786Z,1520537836.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:17.156Z,1520537837.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:17.172Z,1520537837.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:17.547Z,1520537837.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:17.574Z,1520537837.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:17.966Z,1520537837.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:17.986Z,1520537837.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:18.369Z,1520537838.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:18.384Z,1520537838.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:18.761Z,1520537838.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:18.777Z,1520537838.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:19.143Z,1520537839.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:19.175Z,1520537839.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:19.543Z,1520537839.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:19.579Z,1520537839.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:19.965Z,1520537839.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:19.980Z,1520537839.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:20.363Z,1520537840.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:20.378Z,1520537840.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:20.753Z,1520537840.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:20.775Z,1520537840.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:21.147Z,1520537841.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:21.174Z,1520537841.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:21.542Z,1520537841.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:21.574Z,1520537841.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:21.965Z,1520537841.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:21.981Z,1520537841.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:22.365Z,1520537842.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:22.380Z,1520537842.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:22.764Z,1520537842.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:22.791Z,1520537842.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:23.148Z,1520537843.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:23.175Z,1520537843.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:23.543Z,1520537843.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:23.574Z,1520537843.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:23.964Z,1520537843.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:23.990Z,1520537843.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:24.370Z,1520537844.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:24.385Z,1520537844.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:24.388Z,1520537844.388 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T19:32:24.4Z
2018-03-08T19:37:24.389Z,1520537844.389 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T19:37:24.389Z,1520537844.389 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T19:37:24.766Z,1520537844.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:24.781Z,1520537844.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:25.244Z,1520537845.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:25.281Z,1520537845.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:25.543Z,1520537845.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:25.579Z,1520537845.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:28.664Z,1520537848.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:28.688Z,1520537848.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:28.802Z,1520537848.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:28.833Z,1520537848.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:29.120Z,1520537849.120 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0276.lzma
2018-03-08T19:37:29.157Z,1520537849.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:29.186Z,1520537849.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:29.541Z,1520537849.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:29.556Z,1520537849.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:29.919Z,1520537849.919 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0276.lzma.bak
2018-03-08T19:37:29.919Z,1520537849.919 [DataOverHttps](INFO): SBD MOMSN=7988534
2018-03-08T19:37:29.943Z,1520537849.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:29.959Z,1520537849.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:30.536Z,1520537850.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:30.551Z,1520537850.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:30.742Z,1520537850.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:30.766Z,1520537850.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:33.883Z,1520537853.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:33.899Z,1520537853.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:34.005Z,1520537854.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:34.034Z,1520537854.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:34.365Z,1520537854.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:34.389Z,1520537854.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:34.752Z,1520537854.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:34.767Z,1520537854.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:35.154Z,1520537855.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:35.195Z,1520537855.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:35.554Z,1520537855.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:35.574Z,1520537855.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:35.969Z,1520537855.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:36.000Z,1520537856.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:39.059Z,1520537859.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:39.074Z,1520537859.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:39.195Z,1520537859.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:39.239Z,1520537859.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:39.525Z,1520537859.525 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180308T074127/Express0277.lzma
2018-03-08T19:37:39.560Z,1520537859.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:39.589Z,1520537859.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:39.951Z,1520537859.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:39.966Z,1520537859.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:40.323Z,1520537860.323 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0277.lzma.bak
2018-03-08T19:37:40.324Z,1520537860.324 [DataOverHttps](INFO): SBD MOMSN=7988536
2018-03-08T19:37:40.365Z,1520537860.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:40.403Z,1520537860.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:41.048Z,1520537861.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:41.072Z,1520537861.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:41.079Z,1520537861.079 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T19:37:41.079Z,1520537861.079 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T19:37:41.079Z,1520537861.079 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T19:37:41.217Z,1520537861.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:41.275Z,1520537861.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:45.525Z,1520537865.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:45.586Z,1520537865.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:45.713Z,1520537865.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:45.751Z,1520537865.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:46.032Z,1520537866.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:46.051Z,1520537866.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:46.454Z,1520537866.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:46.494Z,1520537866.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:46.836Z,1520537866.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:46.852Z,1520537866.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:47.249Z,1520537867.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:47.279Z,1520537867.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:47.649Z,1520537867.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:47.676Z,1520537867.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:48.049Z,1520537868.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:48.080Z,1520537868.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:48.435Z,1520537868.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:48.463Z,1520537868.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:48.839Z,1520537868.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:48.855Z,1520537868.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:49.240Z,1520537869.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:49.255Z,1520537869.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:49.638Z,1520537869.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:49.654Z,1520537869.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:50.045Z,1520537870.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:50.060Z,1520537870.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:50.441Z,1520537870.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:50.456Z,1520537870.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:50.853Z,1520537870.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:50.889Z,1520537870.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:51.239Z,1520537871.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:51.254Z,1520537871.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:51.632Z,1520537871.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:51.662Z,1520537871.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:52.040Z,1520537872.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:52.055Z,1520537872.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:52.441Z,1520537872.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:52.456Z,1520537872.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:52.836Z,1520537872.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:52.851Z,1520537872.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:53.253Z,1520537873.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:53.288Z,1520537873.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:53.649Z,1520537873.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:53.664Z,1520537873.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:54.041Z,1520537874.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:54.069Z,1520537874.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:54.443Z,1520537874.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:54.459Z,1520537874.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:54.844Z,1520537874.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:54.859Z,1520537874.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:55.245Z,1520537875.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:55.261Z,1520537875.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:55.639Z,1520537875.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:55.654Z,1520537875.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:56.049Z,1520537876.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:56.064Z,1520537876.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:56.450Z,1520537876.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:56.470Z,1520537876.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:56.848Z,1520537876.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:56.864Z,1520537876.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:57.240Z,1520537877.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:57.256Z,1520537877.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:57.636Z,1520537877.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:57.660Z,1520537877.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:58.044Z,1520537878.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:58.059Z,1520537878.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:58.428Z,1520537878.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:58.455Z,1520537878.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:58.833Z,1520537878.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:58.857Z,1520537878.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:59.250Z,1520537879.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:59.271Z,1520537879.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:37:59.653Z,1520537879.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:37:59.668Z,1520537879.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:00.052Z,1520537880.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:00.068Z,1520537880.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:00.443Z,1520537880.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:00.462Z,1520537880.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:00.843Z,1520537880.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:00.859Z,1520537880.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:01.245Z,1520537881.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:01.261Z,1520537881.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:01.639Z,1520537881.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:01.659Z,1520537881.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:02.053Z,1520537882.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:02.069Z,1520537882.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:02.452Z,1520537882.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:02.475Z,1520537882.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:02.853Z,1520537882.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:02.869Z,1520537882.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:03.243Z,1520537883.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:03.259Z,1520537883.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:03.628Z,1520537883.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:03.662Z,1520537883.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:04.044Z,1520537884.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:04.059Z,1520537884.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:04.431Z,1520537884.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:04.459Z,1520537884.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:04.827Z,1520537884.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:04.853Z,1520537884.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:05.256Z,1520537885.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:05.279Z,1520537885.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:05.656Z,1520537885.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:05.671Z,1520537885.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:06.051Z,1520537886.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:06.066Z,1520537886.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:06.431Z,1520537886.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:06.456Z,1520537886.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:06.831Z,1520537886.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:06.845Z,1520537886.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:07.235Z,1520537887.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:07.251Z,1520537887.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:07.653Z,1520537887.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:07.668Z,1520537887.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:08.045Z,1520537888.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:08.061Z,1520537888.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:08.449Z,1520537888.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:08.464Z,1520537888.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:08.841Z,1520537888.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:08.857Z,1520537888.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:09.232Z,1520537889.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:09.247Z,1520537889.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:09.631Z,1520537889.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:09.650Z,1520537889.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:10.029Z,1520537890.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:10.044Z,1520537890.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:10.455Z,1520537890.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:10.474Z,1520537890.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:10.832Z,1520537890.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:10.860Z,1520537890.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:11.245Z,1520537891.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:11.273Z,1520537891.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:11.658Z,1520537891.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:11.673Z,1520537891.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:12.054Z,1520537892.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:12.075Z,1520537892.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:12.435Z,1520537892.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:12.462Z,1520537892.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:12.831Z,1520537892.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:12.860Z,1520537892.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:13.251Z,1520537893.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:13.281Z,1520537893.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:13.630Z,1520537893.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:13.666Z,1520537893.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:14.054Z,1520537894.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:14.069Z,1520537894.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:14.457Z,1520537894.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:14.479Z,1520537894.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:14.853Z,1520537894.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:14.875Z,1520537894.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:15.235Z,1520537895.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:15.262Z,1520537895.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:15.626Z,1520537895.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:15.649Z,1520537895.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:16.031Z,1520537896.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:16.066Z,1520537896.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:16.431Z,1520537896.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:16.464Z,1520537896.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:16.824Z,1520537896.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:16.839Z,1520537896.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:17.241Z,1520537897.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:17.267Z,1520537897.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:17.655Z,1520537897.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:17.670Z,1520537897.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:18.037Z,1520537898.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:18.064Z,1520537898.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:18.431Z,1520537898.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:18.466Z,1520537898.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:18.831Z,1520537898.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:18.868Z,1520537898.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:19.235Z,1520537899.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:19.267Z,1520537899.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:19.630Z,1520537899.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:19.668Z,1520537899.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:20.055Z,1520537900.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:20.070Z,1520537900.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:20.454Z,1520537900.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:20.469Z,1520537900.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:20.841Z,1520537900.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:20.879Z,1520537900.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:21.232Z,1520537901.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:21.248Z,1520537901.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:21.631Z,1520537901.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:21.647Z,1520537901.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:22.038Z,1520537902.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:22.075Z,1520537902.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:22.440Z,1520537902.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:22.456Z,1520537902.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:22.830Z,1520537902.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:22.849Z,1520537902.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:23.249Z,1520537903.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:23.282Z,1520537903.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:23.657Z,1520537903.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:23.690Z,1520537903.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:24.049Z,1520537904.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:24.082Z,1520537904.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:24.435Z,1520537904.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:24.455Z,1520537904.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:24.840Z,1520537904.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:24.856Z,1520537904.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:25.241Z,1520537905.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:25.262Z,1520537905.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:25.640Z,1520537905.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:25.655Z,1520537905.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:26.045Z,1520537906.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:26.061Z,1520537906.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:26.441Z,1520537906.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:26.457Z,1520537906.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:26.841Z,1520537906.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:26.857Z,1520537906.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:27.241Z,1520537907.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:27.256Z,1520537907.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:27.632Z,1520537907.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:27.659Z,1520537907.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:28.042Z,1520537908.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:28.057Z,1520537908.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:28.441Z,1520537908.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:28.456Z,1520537908.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:28.839Z,1520537908.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:28.854Z,1520537908.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:29.244Z,1520537909.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:29.260Z,1520537909.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:29.649Z,1520537909.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:29.665Z,1520537909.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:30.045Z,1520537910.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:30.061Z,1520537910.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:30.439Z,1520537910.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:30.454Z,1520537910.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:30.837Z,1520537910.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:30.865Z,1520537910.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:31.227Z,1520537911.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:31.253Z,1520537911.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:31.631Z,1520537911.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:31.662Z,1520537911.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:32.054Z,1520537912.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:32.069Z,1520537912.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:32.456Z,1520537912.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:32.471Z,1520537912.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:32.853Z,1520537912.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:32.868Z,1520537912.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:33.231Z,1520537913.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:33.259Z,1520537913.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:33.635Z,1520537913.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:33.661Z,1520537913.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:34.031Z,1520537914.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:34.059Z,1520537914.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:34.435Z,1520537914.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:34.463Z,1520537914.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:34.831Z,1520537914.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:34.871Z,1520537914.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:35.251Z,1520537915.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:35.266Z,1520537915.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:35.651Z,1520537915.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:35.679Z,1520537915.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:36.058Z,1520537916.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:36.074Z,1520537916.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:36.431Z,1520537916.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:36.463Z,1520537916.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:36.837Z,1520537916.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:36.868Z,1520537916.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:37.236Z,1520537917.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:37.252Z,1520537917.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:37.639Z,1520537917.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:37.675Z,1520537917.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:38.054Z,1520537918.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:38.081Z,1520537918.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:38.450Z,1520537918.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:38.485Z,1520537918.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:38.855Z,1520537918.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:38.884Z,1520537918.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:39.239Z,1520537919.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:39.255Z,1520537919.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:39.638Z,1520537919.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:39.657Z,1520537919.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:40.040Z,1520537920.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:40.055Z,1520537920.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:40.439Z,1520537920.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:40.454Z,1520537920.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:40.834Z,1520537920.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:40.860Z,1520537920.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:41.218Z,1520537921.218 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T19:38:41.218Z,1520537921.218 [NAL9602] Data Fault, FailCount= 1
2018-03-08T19:38:41.218Z,1520537921.218 [NAL9602](ERROR): Data Fault
2018-03-08T19:38:41.243Z,1520537921.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:41.258Z,1520537921.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:41.272Z,1520537921.272 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T19:38:41.618Z,1520537921.618 [NAL9602](INFO): Powering down
2018-03-08T19:38:41.636Z,1520537921.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:41.658Z,1520537921.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:44.897Z,1520537924.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:44.914Z,1520537924.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:45.016Z,1520537925.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:45.050Z,1520537925.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:45.063Z,1520537925.063 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T19:38:45.063Z,1520537925.063 [NAL9602] No Fault, FailCount= 1
2018-03-08T19:38:45.368Z,1520537925.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:45.447Z,1520537925.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:45.764Z,1520537925.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:45.780Z,1520537925.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:46.167Z,1520537926.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:46.183Z,1520537926.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:46.563Z,1520537926.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:46.591Z,1520537926.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:46.962Z,1520537926.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:46.998Z,1520537926.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:47.360Z,1520537927.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:47.399Z,1520537927.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:47.766Z,1520537927.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:47.793Z,1520537927.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:48.162Z,1520537928.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:48.195Z,1520537928.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:48.562Z,1520537928.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:48.599Z,1520537928.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:48.961Z,1520537928.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:48.993Z,1520537928.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:49.367Z,1520537929.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:49.400Z,1520537929.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:49.761Z,1520537929.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:49.776Z,1520537929.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:50.163Z,1520537930.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:50.178Z,1520537930.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:50.567Z,1520537930.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:50.581Z,1520537930.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:50.964Z,1520537930.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:50.981Z,1520537930.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:51.371Z,1520537931.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:51.386Z,1520537931.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:51.770Z,1520537931.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:51.786Z,1520537931.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:52.163Z,1520537932.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:52.180Z,1520537932.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:52.574Z,1520537932.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:52.590Z,1520537932.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:52.971Z,1520537932.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:53.057Z,1520537933.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:53.365Z,1520537933.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:53.380Z,1520537933.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:53.772Z,1520537933.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:53.787Z,1520537933.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:54.167Z,1520537934.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:54.183Z,1520537934.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:54.568Z,1520537934.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:54.583Z,1520537934.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:54.966Z,1520537934.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:54.994Z,1520537934.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:55.367Z,1520537935.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:55.382Z,1520537935.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:55.768Z,1520537935.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:55.783Z,1520537935.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:56.171Z,1520537936.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:56.186Z,1520537936.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:56.572Z,1520537936.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:56.587Z,1520537936.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:56.967Z,1520537936.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:56.983Z,1520537936.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:57.369Z,1520537937.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:57.384Z,1520537937.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:57.767Z,1520537937.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:57.783Z,1520537937.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:58.167Z,1520537938.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:58.192Z,1520537938.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:58.568Z,1520537938.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:58.583Z,1520537938.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:58.972Z,1520537938.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:58.987Z,1520537938.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:59.368Z,1520537939.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:59.383Z,1520537939.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:38:59.767Z,1520537939.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:38:59.796Z,1520537939.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:00.170Z,1520537940.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:00.185Z,1520537940.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:00.569Z,1520537940.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:00.584Z,1520537940.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:00.970Z,1520537940.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:00.985Z,1520537940.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:01.372Z,1520537941.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:01.387Z,1520537941.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:01.765Z,1520537941.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:01.781Z,1520537941.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:02.170Z,1520537942.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:02.190Z,1520537942.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:02.571Z,1520537942.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:02.587Z,1520537942.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:02.972Z,1520537942.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:02.987Z,1520537942.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:03.371Z,1520537943.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:03.386Z,1520537943.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:03.771Z,1520537943.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:03.786Z,1520537943.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:04.170Z,1520537944.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:04.186Z,1520537944.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:04.570Z,1520537944.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:04.590Z,1520537944.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:04.972Z,1520537944.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:04.987Z,1520537944.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:05.369Z,1520537945.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:05.385Z,1520537945.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:05.771Z,1520537945.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:05.787Z,1520537945.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:06.170Z,1520537946.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:06.186Z,1520537946.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:06.570Z,1520537946.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:06.586Z,1520537946.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:06.969Z,1520537946.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:06.991Z,1520537946.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:07.371Z,1520537947.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:07.387Z,1520537947.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:07.768Z,1520537947.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:07.783Z,1520537947.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:08.172Z,1520537948.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:08.187Z,1520537948.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:08.570Z,1520537948.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:08.585Z,1520537948.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:08.971Z,1520537948.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:08.987Z,1520537948.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:09.369Z,1520537949.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:09.384Z,1520537949.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:09.772Z,1520537949.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:09.787Z,1520537949.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:10.172Z,1520537950.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:10.188Z,1520537950.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:10.572Z,1520537950.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:10.586Z,1520537950.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:10.972Z,1520537950.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:10.987Z,1520537950.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:11.368Z,1520537951.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:11.383Z,1520537951.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:11.746Z,1520537951.746 [NAL9602](INFO): Powering up NAL9602
2018-03-08T19:39:11.770Z,1520537951.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:11.804Z,1520537951.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:12.172Z,1520537952.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:12.188Z,1520537952.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:12.568Z,1520537952.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:12.584Z,1520537952.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:12.972Z,1520537952.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:12.987Z,1520537952.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:13.372Z,1520537953.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:13.387Z,1520537953.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:13.770Z,1520537953.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:13.785Z,1520537953.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:14.169Z,1520537954.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:14.190Z,1520537954.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:14.572Z,1520537954.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:14.587Z,1520537954.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:14.972Z,1520537954.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:14.987Z,1520537954.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:15.372Z,1520537955.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:15.386Z,1520537955.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:15.772Z,1520537955.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:15.787Z,1520537955.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:16.171Z,1520537956.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:16.195Z,1520537956.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:16.574Z,1520537956.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:16.589Z,1520537956.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:16.975Z,1520537956.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:16.991Z,1520537956.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:17.370Z,1520537957.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:17.386Z,1520537957.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:17.776Z,1520537957.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:17.798Z,1520537957.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:18.173Z,1520537958.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:18.189Z,1520537958.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:18.570Z,1520537958.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:18.586Z,1520537958.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:18.974Z,1520537958.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:18.989Z,1520537958.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:19.375Z,1520537959.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:19.390Z,1520537959.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:19.771Z,1520537959.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:19.786Z,1520537959.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:20.174Z,1520537960.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:20.190Z,1520537960.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:20.575Z,1520537960.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:20.590Z,1520537960.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:20.968Z,1520537960.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:20.991Z,1520537960.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:21.368Z,1520537961.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:21.395Z,1520537961.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:21.775Z,1520537961.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:21.791Z,1520537961.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:22.176Z,1520537962.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:22.202Z,1520537962.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:22.549Z,1520537962.549 [NAL9602](INFO): NAL9602 initialized
2018-03-08T19:39:22.579Z,1520537962.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:22.594Z,1520537962.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:22.976Z,1520537962.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:22.991Z,1520537962.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:23.381Z,1520537963.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:23.396Z,1520537963.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:23.781Z,1520537963.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:23.796Z,1520537963.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:24.180Z,1520537964.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:24.196Z,1520537964.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:24.577Z,1520537964.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:24.593Z,1520537964.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:24.977Z,1520537964.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:24.993Z,1520537964.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:25.375Z,1520537965.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:25.391Z,1520537965.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:25.782Z,1520537965.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:25.797Z,1520537965.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:26.182Z,1520537966.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:26.197Z,1520537966.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:26.582Z,1520537966.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:26.598Z,1520537966.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:26.977Z,1520537966.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:26.992Z,1520537966.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:27.377Z,1520537967.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:27.392Z,1520537967.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:27.772Z,1520537967.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:27.788Z,1520537967.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:28.180Z,1520537968.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:28.225Z,1520537968.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:28.581Z,1520537968.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:28.597Z,1520537968.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:28.981Z,1520537968.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:29.002Z,1520537969.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:29.386Z,1520537969.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:29.401Z,1520537969.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:29.778Z,1520537969.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:29.793Z,1520537969.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:30.169Z,1520537970.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:30.197Z,1520537970.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:30.590Z,1520537970.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:30.610Z,1520537970.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:30.991Z,1520537970.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:31.007Z,1520537971.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:31.381Z,1520537971.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:31.402Z,1520537971.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:31.763Z,1520537971.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:31.796Z,1520537971.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:32.166Z,1520537972.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:32.196Z,1520537972.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:32.577Z,1520537972.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:32.609Z,1520537972.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:32.986Z,1520537972.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:33.002Z,1520537973.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:33.381Z,1520537973.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:33.404Z,1520537973.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:33.763Z,1520537973.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:33.795Z,1520537973.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:34.163Z,1520537974.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:34.205Z,1520537974.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:34.590Z,1520537974.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:34.606Z,1520537974.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:34.977Z,1520537974.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:35.003Z,1520537975.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:35.376Z,1520537975.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:35.411Z,1520537975.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:35.767Z,1520537975.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:35.802Z,1520537975.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:36.163Z,1520537976.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:36.205Z,1520537976.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:36.577Z,1520537976.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:36.604Z,1520537976.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:36.992Z,1520537976.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:37.015Z,1520537977.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:37.373Z,1520537977.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:37.400Z,1520537977.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:37.771Z,1520537977.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:37.803Z,1520537977.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:38.167Z,1520537978.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:38.204Z,1520537978.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:38.577Z,1520537978.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:38.610Z,1520537978.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:38.977Z,1520537978.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:39.008Z,1520537979.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:39.381Z,1520537979.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:39.417Z,1520537979.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:39.773Z,1520537979.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:39.788Z,1520537979.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:40.168Z,1520537980.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:40.214Z,1520537980.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:40.585Z,1520537980.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:40.621Z,1520537980.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:40.981Z,1520537980.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:40.996Z,1520537980.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:41.377Z,1520537981.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:41.393Z,1520537981.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:41.790Z,1520537981.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:41.834Z,1520537981.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:46.091Z,1520537986.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:46.134Z,1520537986.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:46.232Z,1520537986.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:46.274Z,1520537986.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:46.612Z,1520537986.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:46.648Z,1520537986.648 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:46.648Z,1520537986.648 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 238
2018-03-08T19:39:46.648Z,1520537986.648 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T19:39:46.679Z,1520537986.679 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:46.679Z,1520537986.679 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 238
2018-03-08T19:39:46.679Z,1520537986.679 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T19:39:46.689Z,1520537986.689 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:46.689Z,1520537986.689 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 238
2018-03-08T19:39:46.689Z,1520537986.689 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T19:39:46.730Z,1520537986.730 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T19:39:46.731Z,1520537986.731 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T19:39:46.731Z,1520537986.731 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T19:39:47.003Z,1520537987.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:47.099Z,1520537987.099 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T19:39:47.099Z,1520537987.099 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 238
2018-03-08T19:39:47.100Z,1520537987.100 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T19:39:47.100Z,1520537987.100 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 238
2018-03-08T19:39:47.100Z,1520537987.100 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T19:39:47.100Z,1520537987.100 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 238
2018-03-08T19:39:47.406Z,1520537987.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:47.430Z,1520537987.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T19:39:47.431Z,1520537987.431 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:39:47.432Z,1520537987.432 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:39:47.433Z,1520537987.433 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T19:39:47.434Z,1520537987.434 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:39:47.434Z,1520537987.434 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:39:47.435Z,1520537987.435 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T19:39:47.436Z,1520537987.436 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:39:47.436Z,1520537987.436 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:39:47.794Z,1520537987.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:47.826Z,1520537987.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T19:39:47.827Z,1520537987.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:48.196Z,1520537988.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:48.211Z,1520537988.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T19:39:48.212Z,1520537988.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:48.595Z,1520537988.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:48.610Z,1520537988.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T19:39:48.611Z,1520537988.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:48.992Z,1520537988.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:49.007Z,1520537989.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T19:39:49.008Z,1520537989.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:49.388Z,1520537989.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:49.402Z,1520537989.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T19:39:49.403Z,1520537989.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:49.801Z,1520537989.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:49.816Z,1520537989.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T19:39:49.817Z,1520537989.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:50.201Z,1520537990.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:50.216Z,1520537990.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T19:39:50.217Z,1520537990.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:50.602Z,1520537990.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:50.616Z,1520537990.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T19:39:50.617Z,1520537990.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:50.989Z,1520537990.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:51.009Z,1520537991.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T19:39:51.010Z,1520537991.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:51.387Z,1520537991.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:51.409Z,1520537991.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T19:39:51.410Z,1520537991.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:51.793Z,1520537991.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:51.807Z,1520537991.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T19:39:51.808Z,1520537991.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:52.196Z,1520537992.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:52.211Z,1520537992.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T19:39:52.212Z,1520537992.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:52.602Z,1520537992.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:52.617Z,1520537992.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T19:39:52.618Z,1520537992.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:53.001Z,1520537993.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:53.015Z,1520537993.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T19:39:53.016Z,1520537993.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:53.413Z,1520537993.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:53.428Z,1520537993.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T19:39:53.446Z,1520537993.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:53.795Z,1520537993.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:53.810Z,1520537993.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T19:39:53.811Z,1520537993.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:54.179Z,1520537994.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:54.212Z,1520537994.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T19:39:54.213Z,1520537994.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:54.589Z,1520537994.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:54.609Z,1520537994.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T19:39:54.610Z,1520537994.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:54.989Z,1520537994.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:55.012Z,1520537995.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T19:39:55.017Z,1520537995.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:55.388Z,1520537995.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:55.414Z,1520537995.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T19:39:55.415Z,1520537995.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:55.809Z,1520537995.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:55.824Z,1520537995.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T19:39:55.825Z,1520537995.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:56.205Z,1520537996.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:56.220Z,1520537996.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T19:39:56.221Z,1520537996.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:56.685Z,1520537996.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:56.709Z,1520537996.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T19:39:56.710Z,1520537996.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:56.987Z,1520537996.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:57.034Z,1520537997.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T19:39:57.036Z,1520537997.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:57.387Z,1520537997.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:57.418Z,1520537997.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T19:39:57.419Z,1520537997.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:57.792Z,1520537997.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:57.814Z,1520537997.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T19:39:57.815Z,1520537997.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:58.193Z,1520537998.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:58.208Z,1520537998.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T19:39:58.209Z,1520537998.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:58.637Z,1520537998.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:58.667Z,1520537998.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T19:39:58.668Z,1520537998.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:59.001Z,1520537999.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:59.032Z,1520537999.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T19:39:59.033Z,1520537999.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:59.397Z,1520537999.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:59.412Z,1520537999.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T19:39:59.413Z,1520537999.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:39:59.803Z,1520537999.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:39:59.822Z,1520537999.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T19:39:59.823Z,1520537999.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:00.180Z,1520538000.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:00.215Z,1520538000.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T19:40:00.216Z,1520538000.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:00.579Z,1520538000.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:00.610Z,1520538000.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T19:40:00.611Z,1520538000.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:00.984Z,1520538000.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:01.009Z,1520538001.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T19:40:01.010Z,1520538001.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:01.379Z,1520538001.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:01.420Z,1520538001.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T19:40:01.421Z,1520538001.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:01.805Z,1520538001.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:01.820Z,1520538001.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T19:40:01.821Z,1520538001.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:02.210Z,1520538002.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:02.224Z,1520538002.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T19:40:02.225Z,1520538002.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:02.610Z,1520538002.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:02.625Z,1520538002.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T19:40:02.625Z,1520538002.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:02.987Z,1520538002.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:03.014Z,1520538003.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T19:40:03.015Z,1520538003.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:03.383Z,1520538003.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:03.409Z,1520538003.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T19:40:03.410Z,1520538003.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:03.779Z,1520538003.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:03.815Z,1520538003.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T19:40:03.816Z,1520538003.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:04.187Z,1520538004.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:04.213Z,1520538004.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T19:40:04.214Z,1520538004.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:04.601Z,1520538004.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:04.622Z,1520538004.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T19:40:04.623Z,1520538004.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:05.003Z,1520538005.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:05.017Z,1520538005.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T19:40:05.018Z,1520538005.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:05.412Z,1520538005.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:05.427Z,1520538005.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T19:40:05.428Z,1520538005.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:05.787Z,1520538005.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:05.813Z,1520538005.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T19:40:05.813Z,1520538005.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:06.179Z,1520538006.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:06.215Z,1520538006.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T19:40:06.216Z,1520538006.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:06.584Z,1520538006.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:06.615Z,1520538006.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T19:40:06.616Z,1520538006.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:06.987Z,1520538006.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:07.018Z,1520538007.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:07.406Z,1520538007.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:07.421Z,1520538007.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:07.805Z,1520538007.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:07.821Z,1520538007.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:08.197Z,1520538008.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:08.219Z,1520538008.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:08.584Z,1520538008.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:08.616Z,1520538008.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:08.987Z,1520538008.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:09.014Z,1520538009.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:09.410Z,1520538009.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:09.425Z,1520538009.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:09.808Z,1520538009.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:09.823Z,1520538009.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:10.210Z,1520538010.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:10.225Z,1520538010.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:10.588Z,1520538010.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:10.618Z,1520538010.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:10.983Z,1520538010.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:11.018Z,1520538011.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:11.393Z,1520538011.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:11.429Z,1520538011.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:11.798Z,1520538011.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:11.830Z,1520538011.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:12.205Z,1520538012.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:12.238Z,1520538012.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:12.587Z,1520538012.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:12.602Z,1520538012.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:12.988Z,1520538012.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:13.004Z,1520538013.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:13.406Z,1520538013.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:13.437Z,1520538013.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:13.789Z,1520538013.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:13.805Z,1520538013.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:14.206Z,1520538014.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:14.236Z,1520538014.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:14.588Z,1520538014.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:14.623Z,1520538014.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:14.989Z,1520538014.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:15.004Z,1520538015.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:15.393Z,1520538015.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:15.409Z,1520538015.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:15.793Z,1520538015.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:15.814Z,1520538015.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:16.197Z,1520538016.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:16.213Z,1520538016.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:16.588Z,1520538016.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:16.611Z,1520538016.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:16.995Z,1520538016.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:17.010Z,1520538017.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:17.401Z,1520538017.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:17.422Z,1520538017.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:17.804Z,1520538017.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:17.819Z,1520538017.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:18.205Z,1520538018.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:18.226Z,1520538018.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:18.594Z,1520538018.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:18.609Z,1520538018.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:18.985Z,1520538018.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:19.017Z,1520538019.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:19.405Z,1520538019.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:19.421Z,1520538019.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:19.794Z,1520538019.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:19.821Z,1520538019.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:20.205Z,1520538020.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:20.220Z,1520538020.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:20.583Z,1520538020.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:20.611Z,1520538020.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:20.995Z,1520538020.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:21.011Z,1520538021.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:21.401Z,1520538021.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:21.421Z,1520538021.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:21.806Z,1520538021.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:21.821Z,1520538021.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:22.205Z,1520538022.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:22.254Z,1520538022.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:22.588Z,1520538022.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:22.614Z,1520538022.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:22.000Z,1520538023.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:23.015Z,1520538023.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:23.402Z,1520538023.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:23.418Z,1520538023.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:23.806Z,1520538023.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:23.821Z,1520538023.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:24.204Z,1520538024.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:24.238Z,1520538024.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:24.584Z,1520538024.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:24.619Z,1520538024.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:24.987Z,1520538024.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:25.015Z,1520538025.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:25.402Z,1520538025.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:25.422Z,1520538025.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:25.797Z,1520538025.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:25.820Z,1520538025.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:26.197Z,1520538026.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:26.228Z,1520538026.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:26.587Z,1520538026.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:26.626Z,1520538026.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:26.980Z,1520538026.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:26.995Z,1520538026.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:27.397Z,1520538027.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:27.424Z,1520538027.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:27.797Z,1520538027.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:27.826Z,1520538027.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:28.214Z,1520538028.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:28.230Z,1520538028.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:28.592Z,1520538028.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:28.627Z,1520538028.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:28.986Z,1520538028.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:29.001Z,1520538029.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:29.389Z,1520538029.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:29.421Z,1520538029.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:29.801Z,1520538029.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:29.825Z,1520538029.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:30.201Z,1520538030.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:30.227Z,1520538030.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:30.584Z,1520538030.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:30.600Z,1520538030.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:30.990Z,1520538030.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:31.010Z,1520538031.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:31.392Z,1520538031.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:31.407Z,1520538031.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:31.793Z,1520538031.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:31.808Z,1520538031.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:32.205Z,1520538032.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:32.241Z,1520538032.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:32.593Z,1520538032.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:32.608Z,1520538032.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:32.992Z,1520538032.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:33.009Z,1520538033.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:33.390Z,1520538033.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:33.405Z,1520538033.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:33.792Z,1520538033.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:33.814Z,1520538033.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:34.195Z,1520538034.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:34.215Z,1520538034.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:34.596Z,1520538034.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:34.612Z,1520538034.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:34.997Z,1520538034.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:35.013Z,1520538035.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:35.394Z,1520538035.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:35.423Z,1520538035.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:35.797Z,1520538035.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:35.812Z,1520538035.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:36.188Z,1520538036.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:36.203Z,1520538036.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:36.592Z,1520538036.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:36.607Z,1520538036.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:36.995Z,1520538036.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:37.010Z,1520538037.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:37.401Z,1520538037.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:37.416Z,1520538037.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:37.798Z,1520538037.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:37.813Z,1520538037.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:38.201Z,1520538038.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:38.216Z,1520538038.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:38.597Z,1520538038.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:38.612Z,1520538038.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:38.995Z,1520538038.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:39.011Z,1520538039.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:39.401Z,1520538039.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:39.416Z,1520538039.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:39.801Z,1520538039.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:39.817Z,1520538039.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:40.198Z,1520538040.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:40.218Z,1520538040.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:40.595Z,1520538040.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:40.614Z,1520538040.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:40.992Z,1520538040.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:41.007Z,1520538041.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:41.398Z,1520538041.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:41.427Z,1520538041.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:41.804Z,1520538041.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:41.829Z,1520538041.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:44.899Z,1520538044.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:44.915Z,1520538044.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:45.014Z,1520538045.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:45.057Z,1520538045.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:45.379Z,1520538045.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:45.413Z,1520538045.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:45.772Z,1520538045.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:45.787Z,1520538045.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:46.175Z,1520538046.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:46.194Z,1520538046.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:46.581Z,1520538046.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:46.614Z,1520538046.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:46.977Z,1520538046.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:46.992Z,1520538046.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:47.374Z,1520538047.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:47.390Z,1520538047.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:47.772Z,1520538047.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:47.787Z,1520538047.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:48.173Z,1520538048.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:48.188Z,1520538048.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:48.573Z,1520538048.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:48.594Z,1520538048.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:48.973Z,1520538048.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:48.988Z,1520538048.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:49.372Z,1520538049.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:49.388Z,1520538049.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:49.774Z,1520538049.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:49.790Z,1520538049.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:50.187Z,1520538050.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:50.219Z,1520538050.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:50.577Z,1520538050.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:50.592Z,1520538050.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:50.970Z,1520538050.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:50.997Z,1520538050.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:51.373Z,1520538051.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:51.394Z,1520538051.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:51.773Z,1520538051.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:51.789Z,1520538051.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:52.168Z,1520538052.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:52.200Z,1520538052.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:52.580Z,1520538052.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:52.597Z,1520538052.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:52.981Z,1520538052.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:52.996Z,1520538052.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:53.378Z,1520538053.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:53.405Z,1520538053.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:53.775Z,1520538053.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:53.794Z,1520538053.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:54.173Z,1520538054.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:54.189Z,1520538054.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:54.572Z,1520538054.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:54.588Z,1520538054.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:54.984Z,1520538054.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:54.999Z,1520538054.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:55.372Z,1520538055.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:55.388Z,1520538055.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:55.780Z,1520538055.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:55.796Z,1520538055.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:56.193Z,1520538056.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:56.214Z,1520538056.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:56.586Z,1520538056.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:56.601Z,1520538056.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:56.964Z,1520538056.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:57.003Z,1520538057.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:57.364Z,1520538057.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:57.399Z,1520538057.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:57.785Z,1520538057.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:57.800Z,1520538057.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:58.163Z,1520538058.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:58.199Z,1520538058.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:58.590Z,1520538058.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:58.605Z,1520538058.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:58.987Z,1520538058.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:59.002Z,1520538059.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:59.377Z,1520538059.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:59.413Z,1520538059.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:40:59.767Z,1520538059.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:40:59.794Z,1520538059.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:00.163Z,1520538060.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:00.199Z,1520538060.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:00.561Z,1520538060.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:00.577Z,1520538060.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:00.972Z,1520538060.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:01.009Z,1520538061.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:01.367Z,1520538061.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:01.382Z,1520538061.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:01.774Z,1520538061.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:01.806Z,1520538061.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:02.182Z,1520538062.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:02.213Z,1520538062.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:02.586Z,1520538062.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:02.612Z,1520538062.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:02.971Z,1520538062.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:02.987Z,1520538062.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:03.368Z,1520538063.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:03.384Z,1520538063.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:03.773Z,1520538063.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:03.789Z,1520538063.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:04.172Z,1520538064.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:04.188Z,1520538064.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:04.585Z,1520538064.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:04.615Z,1520538064.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:04.997Z,1520538064.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:05.024Z,1520538065.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:05.371Z,1520538065.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:05.395Z,1520538065.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:05.776Z,1520538065.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:05.798Z,1520538065.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:06.176Z,1520538066.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:06.192Z,1520538066.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:06.570Z,1520538066.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:06.585Z,1520538066.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:06.981Z,1520538066.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:06.996Z,1520538066.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:07.379Z,1520538067.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:07.394Z,1520538067.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:07.777Z,1520538067.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:07.807Z,1520538067.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:08.184Z,1520538068.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:08.199Z,1520538068.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:08.586Z,1520538068.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:08.606Z,1520538068.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:08.963Z,1520538068.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:08.990Z,1520538068.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:09.379Z,1520538069.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:09.398Z,1520538069.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:09.778Z,1520538069.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:09.793Z,1520538069.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:10.175Z,1520538070.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:10.210Z,1520538070.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:10.589Z,1520538070.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:10.611Z,1520538070.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:10.993Z,1520538070.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:11.008Z,1520538071.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:11.382Z,1520538071.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:11.397Z,1520538071.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:11.779Z,1520538071.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:11.798Z,1520538071.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:12.167Z,1520538072.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:12.195Z,1520538072.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:12.561Z,1520538072.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:12.596Z,1520538072.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:12.981Z,1520538072.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:12.996Z,1520538072.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:13.367Z,1520538073.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:13.396Z,1520538073.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:13.782Z,1520538073.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:13.797Z,1520538073.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:14.193Z,1520538074.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:14.208Z,1520538074.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:14.593Z,1520538074.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:14.610Z,1520538074.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:14.967Z,1520538074.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:14.998Z,1520538074.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:15.380Z,1520538075.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:15.396Z,1520538075.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:15.768Z,1520538075.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:15.796Z,1520538075.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:16.163Z,1520538076.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:16.191Z,1520538076.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:16.591Z,1520538076.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:16.606Z,1520538076.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:16.990Z,1520538076.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:17.010Z,1520538077.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:17.385Z,1520538077.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:17.405Z,1520538077.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:17.767Z,1520538077.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:17.794Z,1520538077.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:18.167Z,1520538078.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:18.197Z,1520538078.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:18.563Z,1520538078.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:18.591Z,1520538078.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:18.972Z,1520538078.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:18.999Z,1520538078.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:19.371Z,1520538079.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:19.400Z,1520538079.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:19.785Z,1520538079.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:19.805Z,1520538079.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:20.195Z,1520538080.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:20.210Z,1520538080.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:20.591Z,1520538080.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:20.606Z,1520538080.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:20.959Z,1520538080.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:20.975Z,1520538080.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:21.366Z,1520538081.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:21.403Z,1520538081.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:21.767Z,1520538081.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:21.799Z,1520538081.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:22.170Z,1520538082.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:22.209Z,1520538082.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:22.571Z,1520538082.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:22.599Z,1520538082.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:22.977Z,1520538082.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:23.009Z,1520538083.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:23.389Z,1520538083.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:23.418Z,1520538083.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:23.781Z,1520538083.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:23.817Z,1520538083.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:24.169Z,1520538084.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:24.185Z,1520538084.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:24.569Z,1520538084.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:24.584Z,1520538084.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:24.971Z,1520538084.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:24.987Z,1520538084.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:25.373Z,1520538085.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:25.388Z,1520538085.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:25.785Z,1520538085.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:25.814Z,1520538085.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:26.189Z,1520538086.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:26.211Z,1520538086.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:26.585Z,1520538086.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:26.616Z,1520538086.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:26.972Z,1520538086.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:26.991Z,1520538086.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:27.373Z,1520538087.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:27.388Z,1520538087.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:27.773Z,1520538087.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:27.789Z,1520538087.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:28.172Z,1520538088.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:28.206Z,1520538088.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:28.573Z,1520538088.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:28.589Z,1520538088.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:28.977Z,1520538088.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:28.994Z,1520538088.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:29.386Z,1520538089.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:29.415Z,1520538089.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:29.790Z,1520538089.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:29.814Z,1520538089.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:30.171Z,1520538090.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:30.187Z,1520538090.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:30.570Z,1520538090.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:30.590Z,1520538090.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:30.973Z,1520538090.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:30.989Z,1520538090.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:31.371Z,1520538091.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:31.386Z,1520538091.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:31.778Z,1520538091.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:31.795Z,1520538091.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:32.185Z,1520538092.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:32.217Z,1520538092.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:32.577Z,1520538092.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:32.594Z,1520538092.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:32.974Z,1520538092.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:32.990Z,1520538092.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:33.376Z,1520538093.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:33.392Z,1520538093.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:33.777Z,1520538093.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:33.793Z,1520538093.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:34.169Z,1520538094.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:34.190Z,1520538094.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:34.581Z,1520538094.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:34.596Z,1520538094.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:34.981Z,1520538094.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:34.996Z,1520538094.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:35.380Z,1520538095.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:35.396Z,1520538095.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:35.774Z,1520538095.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:35.795Z,1520538095.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:36.173Z,1520538096.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:36.188Z,1520538096.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:36.569Z,1520538096.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:36.592Z,1520538096.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:36.974Z,1520538096.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:36.989Z,1520538096.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:37.373Z,1520538097.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:37.388Z,1520538097.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:37.781Z,1520538097.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:37.797Z,1520538097.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:38.182Z,1520538098.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:38.197Z,1520538098.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:38.582Z,1520538098.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:38.597Z,1520538098.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:38.970Z,1520538098.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:38.991Z,1520538098.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:39.377Z,1520538099.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:39.392Z,1520538099.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:39.767Z,1520538099.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:39.801Z,1520538099.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:40.173Z,1520538100.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:40.341Z,1520538100.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:40.575Z,1520538100.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:40.595Z,1520538100.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:40.981Z,1520538100.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:40.997Z,1520538100.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:41.381Z,1520538101.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:41.402Z,1520538101.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:41.804Z,1520538101.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:41.833Z,1520538101.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:42.171Z,1520538102.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:42.202Z,1520538102.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:46.718Z,1520538106.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:46.734Z,1520538106.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:46.825Z,1520538106.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:46.870Z,1520538106.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:47.229Z,1520538107.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:47.264Z,1520538107.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:47.637Z,1520538107.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:47.661Z,1520538107.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:48.031Z,1520538108.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:48.064Z,1520538108.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:48.408Z,1520538108.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:48.424Z,1520538108.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:48.811Z,1520538108.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:48.831Z,1520538108.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:49.216Z,1520538109.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:49.232Z,1520538109.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:49.617Z,1520538109.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:49.633Z,1520538109.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:50.017Z,1520538110.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:50.039Z,1520538110.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:50.417Z,1520538110.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:50.434Z,1520538110.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:50.814Z,1520538110.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:50.830Z,1520538110.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:51.208Z,1520538111.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:51.224Z,1520538111.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:51.610Z,1520538111.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:51.631Z,1520538111.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:52.014Z,1520538112.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:52.034Z,1520538112.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:52.415Z,1520538112.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:52.435Z,1520538112.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:52.824Z,1520538112.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:52.840Z,1520538112.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:53.224Z,1520538113.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:53.239Z,1520538113.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:53.624Z,1520538113.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:53.640Z,1520538113.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:54.016Z,1520538114.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:54.031Z,1520538114.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:54.415Z,1520538114.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:54.430Z,1520538114.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:54.817Z,1520538114.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:54.832Z,1520538114.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:55.214Z,1520538115.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:55.235Z,1520538115.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:55.625Z,1520538115.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:55.646Z,1520538115.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:56.022Z,1520538116.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:56.037Z,1520538116.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:56.424Z,1520538116.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:56.440Z,1520538116.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:56.816Z,1520538116.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:56.831Z,1520538116.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:57.216Z,1520538117.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:57.231Z,1520538117.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:57.615Z,1520538117.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:57.630Z,1520538117.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:58.017Z,1520538118.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:58.033Z,1520538118.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:58.415Z,1520538118.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:58.439Z,1520538118.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:58.468Z,1520538118.468 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T19:41:58.825Z,1520538118.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:58.841Z,1520538118.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:59.225Z,1520538119.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:59.240Z,1520538119.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:41:59.625Z,1520538119.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:41:59.641Z,1520538119.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:00.009Z,1520538120.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:00.037Z,1520538120.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:00.416Z,1520538120.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:00.431Z,1520538120.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:00.819Z,1520538120.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:00.834Z,1520538120.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:01.215Z,1520538121.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:01.230Z,1520538121.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:01.626Z,1520538121.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:01.646Z,1520538121.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:02.022Z,1520538122.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:02.038Z,1520538122.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:02.423Z,1520538122.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:02.438Z,1520538122.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:02.799Z,1520538122.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:02.832Z,1520538122.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:03.225Z,1520538123.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:03.241Z,1520538123.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:03.615Z,1520538123.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:03.631Z,1520538123.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:03.000Z,1520538124.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:04.037Z,1520538124.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:04.390Z,1520538124.390 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-03-08T19:42:04.390Z,1520538124.390 [DropWeight] Hardware Fault, FailCount= 1
2018-03-08T19:42:04.390Z,1520538124.390 [DropWeight](ERROR): Hardware Fault
2018-03-08T19:42:04.427Z,1520538124.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:04.444Z,1520538124.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:04.467Z,1520538124.467 [CBIT](INFO): Critical error at 20180308T194204
2018-03-08T19:42:04.473Z,1520538124.473 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-03-08T19:42:04.474Z,1520538124.474 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-03-08T19:42:04.821Z,1520538124.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:04.837Z,1520538124.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:04.848Z,1520538124.848 [CBIT](INFO): Critical error at 20180308T194204
2018-03-08T19:42:05.223Z,1520538125.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:05.254Z,1520538125.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:05.628Z,1520538125.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:05.644Z,1520538125.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:06.010Z,1520538126.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:06.040Z,1520538126.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:06.410Z,1520538126.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:06.443Z,1520538126.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:06.807Z,1520538126.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:06.843Z,1520538126.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:07.214Z,1520538127.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:07.243Z,1520538127.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:07.627Z,1520538127.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:07.642Z,1520538127.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:08.017Z,1520538128.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:08.043Z,1520538128.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:08.427Z,1520538128.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:08.443Z,1520538128.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:08.807Z,1520538128.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:08.838Z,1520538128.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:09.204Z,1520538129.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:09.219Z,1520538129.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:09.606Z,1520538129.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:09.647Z,1520538129.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:10.011Z,1520538130.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:10.026Z,1520538130.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:10.403Z,1520538130.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:10.419Z,1520538130.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:10.821Z,1520538130.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:10.845Z,1520538130.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:11.225Z,1520538131.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:11.250Z,1520538131.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:11.621Z,1520538131.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:11.645Z,1520538131.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:12.008Z,1520538132.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:12.023Z,1520538132.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:12.410Z,1520538132.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:12.425Z,1520538132.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:12.811Z,1520538132.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:12.854Z,1520538132.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:13.212Z,1520538133.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:13.227Z,1520538133.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:13.625Z,1520538133.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:13.657Z,1520538133.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:14.021Z,1520538134.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:14.036Z,1520538134.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:14.425Z,1520538134.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:14.457Z,1520538134.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:14.815Z,1520538134.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:14.830Z,1520538134.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:15.214Z,1520538135.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:15.230Z,1520538135.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:15.614Z,1520538135.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:15.629Z,1520538135.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:16.013Z,1520538136.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:16.028Z,1520538136.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:16.414Z,1520538136.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:16.429Z,1520538136.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:16.815Z,1520538136.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:16.839Z,1520538136.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:17.221Z,1520538137.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:17.236Z,1520538137.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:17.617Z,1520538137.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:17.633Z,1520538137.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:18.015Z,1520538138.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:18.030Z,1520538138.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:18.414Z,1520538138.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:18.429Z,1520538138.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:18.815Z,1520538138.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:18.831Z,1520538138.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:19.213Z,1520538139.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:19.229Z,1520538139.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:19.617Z,1520538139.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:19.632Z,1520538139.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:20.022Z,1520538140.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:20.037Z,1520538140.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:20.417Z,1520538140.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:20.433Z,1520538140.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:20.815Z,1520538140.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:20.830Z,1520538140.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:21.214Z,1520538141.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:21.229Z,1520538141.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:21.614Z,1520538141.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:21.629Z,1520538141.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:22.015Z,1520538142.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:22.030Z,1520538142.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:22.414Z,1520538142.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:22.429Z,1520538142.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:22.818Z,1520538142.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:22.833Z,1520538142.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:23.217Z,1520538143.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:23.232Z,1520538143.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:23.616Z,1520538143.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:23.631Z,1520538143.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:24.015Z,1520538144.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:24.030Z,1520538144.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:24.408Z,1520538144.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:24.423Z,1520538144.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:24.812Z,1520538144.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:24.828Z,1520538144.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:25.214Z,1520538145.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:25.229Z,1520538145.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:25.618Z,1520538145.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:25.633Z,1520538145.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:26.020Z,1520538146.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:26.043Z,1520538146.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:26.420Z,1520538146.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:26.435Z,1520538146.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:26.811Z,1520538146.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:26.826Z,1520538146.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:27.201Z,1520538147.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:27.233Z,1520538147.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:27.679Z,1520538147.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:27.694Z,1520538147.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:28.010Z,1520538148.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:28.025Z,1520538148.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:28.408Z,1520538148.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:28.424Z,1520538148.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:28.834Z,1520538148.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:28.867Z,1520538148.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:29.220Z,1520538149.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:29.235Z,1520538149.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:29.620Z,1520538149.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:29.636Z,1520538149.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:30.014Z,1520538150.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:30.035Z,1520538150.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:30.435Z,1520538150.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:30.469Z,1520538150.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:30.815Z,1520538150.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:30.831Z,1520538150.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:31.214Z,1520538151.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:31.229Z,1520538151.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:31.620Z,1520538151.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:31.643Z,1520538151.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:32.016Z,1520538152.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:32.032Z,1520538152.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:32.421Z,1520538152.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:32.436Z,1520538152.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:32.811Z,1520538152.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:32.826Z,1520538152.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:33.214Z,1520538153.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:33.235Z,1520538153.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:33.614Z,1520538153.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:33.635Z,1520538153.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:34.017Z,1520538154.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:34.032Z,1520538154.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:34.408Z,1520538154.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:34.424Z,1520538154.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:34.819Z,1520538154.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:34.835Z,1520538154.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:35.220Z,1520538155.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:35.235Z,1520538155.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:35.616Z,1520538155.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:35.631Z,1520538155.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:36.014Z,1520538156.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:36.034Z,1520538156.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:36.411Z,1520538156.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:36.431Z,1520538156.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:36.817Z,1520538156.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:36.832Z,1520538156.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:37.209Z,1520538157.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:37.229Z,1520538157.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:37.620Z,1520538157.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:37.643Z,1520538157.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:38.020Z,1520538158.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:38.035Z,1520538158.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:38.420Z,1520538158.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:38.443Z,1520538158.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:38.815Z,1520538158.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:38.830Z,1520538158.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:39.216Z,1520538159.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:39.231Z,1520538159.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:39.615Z,1520538159.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:39.634Z,1520538159.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:40.018Z,1520538160.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:40.033Z,1520538160.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:40.408Z,1520538160.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:40.423Z,1520538160.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:40.821Z,1520538160.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:40.836Z,1520538160.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:41.221Z,1520538161.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:41.236Z,1520538161.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:41.621Z,1520538161.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:41.636Z,1520538161.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:41.639Z,1520538161.639 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T19:42:41.639Z,1520538161.639 [Default:CheckIn:C.Wait] Stopped
2018-03-08T19:42:41.639Z,1520538161.639 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T19:42:41.640Z,1520538161.640 [Default:CheckIn:D] Running Loop=1
2018-03-08T19:42:42.017Z,1520538162.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:42.039Z,1520538162.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:42.042Z,1520538162.042 [Default:CheckIn:D] Stopped
2018-03-08T19:42:42.042Z,1520538162.042 [Default:CheckIn:E] Running Loop=1
2018-03-08T19:42:42.413Z,1520538162.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:42.429Z,1520538162.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:42.432Z,1520538162.432 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 716.953971 min 
2018-03-08T19:42:42.432Z,1520538162.432 [Default:CheckIn:E] Stopped
2018-03-08T19:42:42.432Z,1520538162.432 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T19:42:42.432Z,1520538162.432 [Default:CheckIn] Stopped
2018-03-08T19:42:42.433Z,1520538162.433 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T19:42:42.433Z,1520538162.433 [Default:CheckIn](INFO): Running loop #70
2018-03-08T19:42:42.433Z,1520538162.433 [Default:CheckIn] Running Loop=70
2018-03-08T19:42:42.433Z,1520538162.433 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T19:42:42.433Z,1520538162.433 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T19:42:45.502Z,1520538165.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:45.526Z,1520538165.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:45.630Z,1520538165.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:45.673Z,1520538165.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:45.997Z,1520538165.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:46.020Z,1520538166.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:46.393Z,1520538166.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:46.420Z,1520538166.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:46.797Z,1520538166.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:46.820Z,1520538166.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:47.179Z,1520538167.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:47.198Z,1520538167.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:47.583Z,1520538167.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:47.598Z,1520538167.598 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:47.598Z,1520538167.598 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 239
2018-03-08T19:42:47.599Z,1520538167.599 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T19:42:47.600Z,1520538167.600 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:47.600Z,1520538167.600 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 239
2018-03-08T19:42:47.600Z,1520538167.600 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T19:42:47.602Z,1520538167.602 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:47.602Z,1520538167.602 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 239
2018-03-08T19:42:47.602Z,1520538167.602 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T19:42:47.634Z,1520538167.634 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T19:42:47.634Z,1520538167.634 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T19:42:47.634Z,1520538167.634 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T19:42:47.978Z,1520538167.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:48.019Z,1520538168.019 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T19:42:48.019Z,1520538168.019 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 239
2018-03-08T19:42:48.020Z,1520538168.020 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T19:42:48.020Z,1520538168.020 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 239
2018-03-08T19:42:48.025Z,1520538168.025 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T19:42:48.025Z,1520538168.025 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 239
2018-03-08T19:42:48.382Z,1520538168.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:48.396Z,1520538168.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T19:42:48.397Z,1520538168.397 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:42:48.397Z,1520538168.397 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:42:48.397Z,1520538168.397 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T19:42:48.398Z,1520538168.398 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:42:48.398Z,1520538168.398 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:42:48.398Z,1520538168.398 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T19:42:48.399Z,1520538168.399 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:42:48.399Z,1520538168.399 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:42:48.793Z,1520538168.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:48.814Z,1520538168.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T19:42:48.815Z,1520538168.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:49.193Z,1520538169.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:49.208Z,1520538169.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T19:42:49.209Z,1520538169.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:49.592Z,1520538169.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:49.607Z,1520538169.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T19:42:49.607Z,1520538169.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:49.987Z,1520538169.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:50.001Z,1520538170.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T19:42:50.002Z,1520538170.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:50.386Z,1520538170.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:50.406Z,1520538170.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T19:42:50.407Z,1520538170.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:50.787Z,1520538170.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:50.802Z,1520538170.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T19:42:50.803Z,1520538170.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:51.186Z,1520538171.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:51.201Z,1520538171.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T19:42:51.202Z,1520538171.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:51.594Z,1520538171.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:51.614Z,1520538171.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T19:42:51.615Z,1520538171.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:51.993Z,1520538171.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:52.008Z,1520538172.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T19:42:52.009Z,1520538172.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:52.393Z,1520538172.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:52.414Z,1520538172.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T19:42:52.415Z,1520538172.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:52.786Z,1520538172.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:52.806Z,1520538172.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T19:42:52.807Z,1520538172.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:53.174Z,1520538173.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:53.205Z,1520538173.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T19:42:53.206Z,1520538173.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:53.574Z,1520538173.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:53.612Z,1520538173.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T19:42:53.613Z,1520538173.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:53.980Z,1520538173.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:54.005Z,1520538174.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T19:42:54.006Z,1520538174.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:54.378Z,1520538174.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:54.404Z,1520538174.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T19:42:54.405Z,1520538174.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:54.794Z,1520538174.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:54.809Z,1520538174.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T19:42:54.810Z,1520538174.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:55.201Z,1520538175.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:55.216Z,1520538175.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T19:42:55.217Z,1520538175.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:55.593Z,1520538175.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:55.608Z,1520538175.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T19:42:55.609Z,1520538175.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:55.974Z,1520538175.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:56.007Z,1520538176.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T19:42:56.007Z,1520538176.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:56.379Z,1520538176.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:56.405Z,1520538176.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T19:42:56.406Z,1520538176.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:56.776Z,1520538176.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:56.810Z,1520538176.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T19:42:56.811Z,1520538176.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:57.174Z,1520538177.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:57.206Z,1520538177.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T19:42:57.207Z,1520538177.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:57.597Z,1520538177.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:57.612Z,1520538177.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T19:42:57.613Z,1520538177.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:57.996Z,1520538177.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:58.014Z,1520538178.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T19:42:58.015Z,1520538178.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:58.384Z,1520538178.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:58.410Z,1520538178.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T19:42:58.411Z,1520538178.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:58.778Z,1520538178.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:58.804Z,1520538178.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T19:42:58.805Z,1520538178.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:59.182Z,1520538179.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:59.208Z,1520538179.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T19:42:59.209Z,1520538179.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:59.574Z,1520538179.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:42:59.607Z,1520538179.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T19:42:59.608Z,1520538179.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:42:59.980Z,1520538179.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:00.005Z,1520538180.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T19:43:00.006Z,1520538180.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:00.374Z,1520538180.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:00.406Z,1520538180.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T19:43:00.407Z,1520538180.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:00.785Z,1520538180.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:00.814Z,1520538180.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T19:43:00.815Z,1520538180.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:01.202Z,1520538181.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:01.217Z,1520538181.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T19:43:01.218Z,1520538181.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:01.597Z,1520538181.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:01.612Z,1520538181.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T19:43:01.613Z,1520538181.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:01.975Z,1520538181.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:02.012Z,1520538182.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T19:43:02.013Z,1520538182.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:02.379Z,1520538182.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:02.410Z,1520538182.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T19:43:02.411Z,1520538182.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:02.777Z,1520538182.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:02.807Z,1520538182.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T19:43:02.812Z,1520538182.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:03.179Z,1520538183.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:03.219Z,1520538183.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T19:43:03.220Z,1520538183.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:03.586Z,1520538183.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:03.612Z,1520538183.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T19:43:03.613Z,1520538183.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:03.990Z,1520538183.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:04.026Z,1520538184.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T19:43:04.027Z,1520538184.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:04.390Z,1520538184.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:04.417Z,1520538184.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T19:43:04.418Z,1520538184.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:04.778Z,1520538184.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:04.795Z,1520538184.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T19:43:04.796Z,1520538184.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:05.182Z,1520538185.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:05.199Z,1520538185.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T19:43:05.200Z,1520538185.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:05.583Z,1520538185.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:05.598Z,1520538185.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T19:43:05.599Z,1520538185.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:05.987Z,1520538185.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:06.002Z,1520538186.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T19:43:06.003Z,1520538186.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:06.380Z,1520538186.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:06.403Z,1520538186.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T19:43:06.404Z,1520538186.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:06.785Z,1520538186.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:06.800Z,1520538186.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T19:43:06.801Z,1520538186.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:07.189Z,1520538187.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:07.204Z,1520538187.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T19:43:07.205Z,1520538187.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:07.597Z,1520538187.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:07.612Z,1520538187.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:07.986Z,1520538187.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:08.002Z,1520538188.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:08.386Z,1520538188.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:08.401Z,1520538188.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:08.789Z,1520538188.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:08.805Z,1520538188.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:09.186Z,1520538189.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:09.201Z,1520538189.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:09.587Z,1520538189.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:09.607Z,1520538189.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:09.993Z,1520538189.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:10.008Z,1520538190.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:10.388Z,1520538190.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:10.403Z,1520538190.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:10.780Z,1520538190.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:10.799Z,1520538190.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:11.182Z,1520538191.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:11.197Z,1520538191.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:11.583Z,1520538191.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:11.598Z,1520538191.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:11.989Z,1520538191.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:12.005Z,1520538192.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:12.386Z,1520538192.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:12.401Z,1520538192.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:12.790Z,1520538192.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:12.805Z,1520538192.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:13.193Z,1520538193.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:13.208Z,1520538193.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:13.611Z,1520538193.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:13.650Z,1520538193.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:13.985Z,1520538193.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:14.035Z,1520538194.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:14.382Z,1520538194.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:14.398Z,1520538194.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:14.787Z,1520538194.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:14.802Z,1520538194.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:15.183Z,1520538195.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:15.198Z,1520538195.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:15.586Z,1520538195.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:15.615Z,1520538195.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:15.993Z,1520538195.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:16.008Z,1520538196.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:16.393Z,1520538196.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:16.409Z,1520538196.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:16.777Z,1520538196.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:16.805Z,1520538196.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:17.186Z,1520538197.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:17.206Z,1520538197.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:17.587Z,1520538197.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:17.603Z,1520538197.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:17.977Z,1520538197.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:18.008Z,1520538198.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:18.378Z,1520538198.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:18.411Z,1520538198.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:18.785Z,1520538198.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:18.820Z,1520538198.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:19.201Z,1520538199.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:19.222Z,1520538199.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:19.597Z,1520538199.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:19.613Z,1520538199.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:19.974Z,1520538199.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:20.011Z,1520538200.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:20.379Z,1520538200.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:20.410Z,1520538200.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:20.777Z,1520538200.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:20.808Z,1520538200.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:21.174Z,1520538201.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:21.189Z,1520538201.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:21.585Z,1520538201.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:21.621Z,1520538201.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:21.993Z,1520538201.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:22.017Z,1520538202.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:22.393Z,1520538202.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:22.419Z,1520538202.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:22.775Z,1520538202.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:22.791Z,1520538202.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:23.182Z,1520538203.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:23.218Z,1520538203.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:23.579Z,1520538203.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:23.594Z,1520538203.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:23.982Z,1520538203.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:23.997Z,1520538203.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:24.379Z,1520538204.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:24.399Z,1520538204.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:24.797Z,1520538204.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:24.821Z,1520538204.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:25.197Z,1520538205.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:25.220Z,1520538205.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:25.589Z,1520538205.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:25.604Z,1520538205.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:25.982Z,1520538205.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:26.024Z,1520538206.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:26.379Z,1520538206.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:26.394Z,1520538206.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:26.783Z,1520538206.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:26.802Z,1520538206.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:27.182Z,1520538207.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:27.198Z,1520538207.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:27.589Z,1520538207.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:27.617Z,1520538207.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:27.996Z,1520538207.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:28.018Z,1520538208.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:28.393Z,1520538208.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:28.408Z,1520538208.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:28.772Z,1520538208.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:28.804Z,1520538208.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:29.185Z,1520538209.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:29.205Z,1520538209.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:29.574Z,1520538209.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:29.601Z,1520538209.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:29.991Z,1520538209.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:30.007Z,1520538210.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:30.374Z,1520538210.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:30.406Z,1520538210.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:30.793Z,1520538210.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:30.808Z,1520538210.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:31.203Z,1520538211.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:31.231Z,1520538211.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:31.597Z,1520538211.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:31.612Z,1520538211.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:31.974Z,1520538211.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:32.003Z,1520538212.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:32.379Z,1520538212.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:32.405Z,1520538212.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:32.777Z,1520538212.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:32.805Z,1520538212.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:33.174Z,1520538213.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:33.201Z,1520538213.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:33.592Z,1520538213.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:33.608Z,1520538213.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:33.998Z,1520538213.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:34.013Z,1520538214.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:34.392Z,1520538214.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:34.407Z,1520538214.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:34.773Z,1520538214.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:34.796Z,1520538214.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:35.174Z,1520538215.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:35.206Z,1520538215.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:35.574Z,1520538215.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:35.607Z,1520538215.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:35.981Z,1520538215.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:36.015Z,1520538216.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:36.378Z,1520538216.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:36.404Z,1520538216.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:36.789Z,1520538216.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:36.820Z,1520538216.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:37.194Z,1520538217.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:37.216Z,1520538217.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:37.593Z,1520538217.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:37.608Z,1520538217.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:37.974Z,1520538217.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:38.007Z,1520538218.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:38.378Z,1520538218.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:38.405Z,1520538218.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:38.781Z,1520538218.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:38.814Z,1520538218.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:39.175Z,1520538219.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:39.207Z,1520538219.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:39.581Z,1520538219.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:39.620Z,1520538219.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:40.001Z,1520538220.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:40.016Z,1520538220.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:40.394Z,1520538220.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:40.409Z,1520538220.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:40.772Z,1520538220.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:40.796Z,1520538220.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:41.174Z,1520538221.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:41.210Z,1520538221.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:41.575Z,1520538221.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:41.614Z,1520538221.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:41.979Z,1520538221.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:42.028Z,1520538222.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:42.377Z,1520538222.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:42.429Z,1520538222.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:42.791Z,1520538222.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:42.829Z,1520538222.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:46.765Z,1520538226.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:46.781Z,1520538226.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:46.890Z,1520538226.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:46.917Z,1520538226.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:47.234Z,1520538227.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:47.271Z,1520538227.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:47.635Z,1520538227.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:47.650Z,1520538227.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:48.041Z,1520538228.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:48.059Z,1520538228.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:48.432Z,1520538228.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:48.456Z,1520538228.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:48.849Z,1520538228.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:48.885Z,1520538228.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:49.240Z,1520538229.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:49.255Z,1520538229.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:49.641Z,1520538229.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:49.658Z,1520538229.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:50.038Z,1520538230.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:50.053Z,1520538230.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:50.442Z,1520538230.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:50.459Z,1520538230.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:50.844Z,1520538230.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:50.860Z,1520538230.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:51.238Z,1520538231.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:51.253Z,1520538231.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:51.644Z,1520538231.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:51.660Z,1520538231.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:52.041Z,1520538232.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:52.056Z,1520538232.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:52.442Z,1520538232.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:52.457Z,1520538232.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:52.827Z,1520538232.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:52.873Z,1520538232.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:53.228Z,1520538233.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:53.243Z,1520538233.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:53.628Z,1520538233.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:53.665Z,1520538233.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:54.026Z,1520538234.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:54.046Z,1520538234.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:54.428Z,1520538234.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:54.444Z,1520538234.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:54.841Z,1520538234.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:54.856Z,1520538234.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:55.241Z,1520538235.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:55.257Z,1520538235.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:55.653Z,1520538235.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:55.674Z,1520538235.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:56.030Z,1520538236.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:56.045Z,1520538236.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:56.430Z,1520538236.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:56.503Z,1520538236.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:56.829Z,1520538236.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:56.848Z,1520538236.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:57.223Z,1520538237.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:57.258Z,1520538237.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:57.637Z,1520538237.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:57.670Z,1520538237.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:58.049Z,1520538238.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:58.067Z,1520538238.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:58.437Z,1520538238.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:58.469Z,1520538238.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:58.820Z,1520538238.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:58.836Z,1520538238.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:59.227Z,1520538239.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:59.267Z,1520538239.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:43:59.631Z,1520538239.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:43:59.670Z,1520538239.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:00.037Z,1520538240.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:00.069Z,1520538240.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:00.435Z,1520538240.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:00.450Z,1520538240.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:00.845Z,1520538240.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:00.879Z,1520538240.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:01.242Z,1520538241.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:01.274Z,1520538241.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:01.646Z,1520538241.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:01.677Z,1520538241.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:02.036Z,1520538242.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:02.051Z,1520538242.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:02.432Z,1520538242.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:02.447Z,1520538242.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:02.837Z,1520538242.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:02.853Z,1520538242.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:03.235Z,1520538243.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:03.250Z,1520538243.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:03.634Z,1520538243.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:03.658Z,1520538243.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:04.046Z,1520538244.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:04.062Z,1520538244.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:04.441Z,1520538244.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:04.456Z,1520538244.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:04.824Z,1520538244.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:04.851Z,1520538244.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:05.238Z,1520538245.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:05.255Z,1520538245.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:05.635Z,1520538245.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:05.654Z,1520538245.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:06.042Z,1520538246.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:06.058Z,1520538246.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:06.438Z,1520538246.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:06.459Z,1520538246.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:06.844Z,1520538246.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:06.863Z,1520538246.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:07.240Z,1520538247.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:07.255Z,1520538247.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:07.642Z,1520538247.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:07.663Z,1520538247.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:08.039Z,1520538248.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:08.059Z,1520538248.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:08.432Z,1520538248.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:08.447Z,1520538248.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:08.839Z,1520538248.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:08.854Z,1520538248.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:09.239Z,1520538249.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:09.254Z,1520538249.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:09.645Z,1520538249.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:09.660Z,1520538249.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:10.043Z,1520538250.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:10.063Z,1520538250.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:10.444Z,1520538250.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:10.460Z,1520538250.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:10.832Z,1520538250.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:10.924Z,1520538250.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:11.236Z,1520538251.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:11.251Z,1520538251.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:11.639Z,1520538251.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:11.655Z,1520538251.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:12.038Z,1520538252.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:12.053Z,1520538252.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:12.434Z,1520538252.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:12.449Z,1520538252.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:12.842Z,1520538252.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:12.867Z,1520538252.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:13.245Z,1520538253.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:13.260Z,1520538253.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:13.649Z,1520538253.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:13.670Z,1520538253.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:14.039Z,1520538254.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:14.055Z,1520538254.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:14.422Z,1520538254.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:14.449Z,1520538254.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:14.838Z,1520538254.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:14.853Z,1520538254.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:15.229Z,1520538255.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:15.261Z,1520538255.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:15.649Z,1520538255.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:15.671Z,1520538255.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:16.047Z,1520538256.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:16.063Z,1520538256.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:16.449Z,1520538256.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:16.464Z,1520538256.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:16.838Z,1520538256.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:16.859Z,1520538256.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:17.238Z,1520538257.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:17.259Z,1520538257.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:17.635Z,1520538257.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:17.651Z,1520538257.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:18.036Z,1520538258.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:18.060Z,1520538258.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:18.439Z,1520538258.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:18.455Z,1520538258.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:18.849Z,1520538258.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:18.865Z,1520538258.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:19.247Z,1520538259.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:19.263Z,1520538259.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:19.648Z,1520538259.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:19.670Z,1520538259.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:20.039Z,1520538260.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:20.059Z,1520538260.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:20.433Z,1520538260.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:20.463Z,1520538260.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:20.843Z,1520538260.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:20.859Z,1520538260.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:21.240Z,1520538261.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:21.255Z,1520538261.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:21.645Z,1520538261.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:21.660Z,1520538261.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:22.049Z,1520538262.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:22.064Z,1520538262.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:22.449Z,1520538262.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:22.470Z,1520538262.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:22.838Z,1520538262.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:22.853Z,1520538262.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:23.235Z,1520538263.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:23.256Z,1520538263.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:23.631Z,1520538263.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:23.667Z,1520538263.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:24.043Z,1520538264.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:24.059Z,1520538264.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:24.427Z,1520538264.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:24.463Z,1520538264.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:24.850Z,1520538264.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:24.866Z,1520538264.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:25.251Z,1520538265.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:25.266Z,1520538265.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:25.651Z,1520538265.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:25.666Z,1520538265.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:26.040Z,1520538266.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:26.055Z,1520538266.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:26.422Z,1520538266.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:26.449Z,1520538266.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:26.829Z,1520538266.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:26.870Z,1520538266.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:27.230Z,1520538267.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:27.259Z,1520538267.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:27.641Z,1520538267.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:27.658Z,1520538267.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:28.056Z,1520538268.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:28.072Z,1520538268.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:28.449Z,1520538268.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:28.465Z,1520538268.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:28.826Z,1520538268.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:28.852Z,1520538268.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:29.226Z,1520538269.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:29.252Z,1520538269.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:29.622Z,1520538269.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:29.660Z,1520538269.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:30.030Z,1520538270.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:30.067Z,1520538270.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:30.430Z,1520538270.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:30.456Z,1520538270.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:30.847Z,1520538270.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:30.862Z,1520538270.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:31.253Z,1520538271.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:31.274Z,1520538271.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:31.650Z,1520538271.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:31.665Z,1520538271.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:32.026Z,1520538272.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:32.064Z,1520538272.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:32.430Z,1520538272.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:32.462Z,1520538272.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:32.831Z,1520538272.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:32.867Z,1520538272.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:33.234Z,1520538273.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:33.266Z,1520538273.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:33.651Z,1520538273.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:33.667Z,1520538273.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:34.059Z,1520538274.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:34.075Z,1520538274.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:34.450Z,1520538274.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:34.466Z,1520538274.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:34.835Z,1520538274.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:34.864Z,1520538274.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:35.234Z,1520538275.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:35.264Z,1520538275.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:35.632Z,1520538275.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:35.659Z,1520538275.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:36.034Z,1520538276.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:36.067Z,1520538276.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:36.434Z,1520538276.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:36.467Z,1520538276.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:36.846Z,1520538276.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:36.872Z,1520538276.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:37.245Z,1520538277.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:37.274Z,1520538277.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:37.645Z,1520538277.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:37.674Z,1520538277.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:38.034Z,1520538278.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:38.073Z,1520538278.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:38.428Z,1520538278.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:38.466Z,1520538278.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:38.837Z,1520538278.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:38.874Z,1520538278.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:39.235Z,1520538279.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:39.249Z,1520538279.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:39.642Z,1520538279.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:39.673Z,1520538279.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:40.050Z,1520538280.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:40.078Z,1520538280.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:40.445Z,1520538280.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:40.469Z,1520538280.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:40.827Z,1520538280.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:40.843Z,1520538280.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:41.231Z,1520538281.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:41.247Z,1520538281.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:41.634Z,1520538281.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:41.650Z,1520538281.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:42.037Z,1520538282.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:42.078Z,1520538282.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:42.432Z,1520538282.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:42.447Z,1520538282.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:42.849Z,1520538282.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:42.882Z,1520538282.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:45.942Z,1520538285.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:45.958Z,1520538285.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:46.075Z,1520538286.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:46.111Z,1520538286.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:46.443Z,1520538286.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:46.458Z,1520538286.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:46.838Z,1520538286.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:46.853Z,1520538286.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:47.240Z,1520538287.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:47.255Z,1520538287.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:47.637Z,1520538287.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:47.652Z,1520538287.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:48.049Z,1520538288.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:48.077Z,1520538288.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:48.454Z,1520538288.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:48.485Z,1520538288.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:48.841Z,1520538288.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:48.856Z,1520538288.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:49.242Z,1520538289.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:49.263Z,1520538289.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:49.642Z,1520538289.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:49.657Z,1520538289.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:50.045Z,1520538290.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:50.060Z,1520538290.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:50.442Z,1520538290.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:50.457Z,1520538290.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:50.845Z,1520538290.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:50.861Z,1520538290.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:51.249Z,1520538291.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:51.264Z,1520538291.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:51.645Z,1520538291.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:51.661Z,1520538291.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:52.041Z,1520538292.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:52.056Z,1520538292.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:52.434Z,1520538292.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:52.450Z,1520538292.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:52.846Z,1520538292.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:52.862Z,1520538292.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:53.238Z,1520538293.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:53.254Z,1520538293.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:53.645Z,1520538293.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:53.661Z,1520538293.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:54.049Z,1520538294.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:54.065Z,1520538294.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:54.445Z,1520538294.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:54.461Z,1520538294.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:54.842Z,1520538294.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:54.857Z,1520538294.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:55.242Z,1520538295.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:55.257Z,1520538295.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:55.642Z,1520538295.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:55.657Z,1520538295.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:56.047Z,1520538296.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:56.062Z,1520538296.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:56.442Z,1520538296.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:56.457Z,1520538296.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:56.845Z,1520538296.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:56.861Z,1520538296.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:57.249Z,1520538297.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:57.264Z,1520538297.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:57.645Z,1520538297.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:57.661Z,1520538297.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:58.042Z,1520538298.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:58.058Z,1520538298.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:58.440Z,1520538298.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:58.455Z,1520538298.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:58.846Z,1520538298.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:58.862Z,1520538298.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:59.242Z,1520538299.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:59.257Z,1520538299.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:44:59.645Z,1520538299.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:44:59.660Z,1520538299.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:00.049Z,1520538300.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:00.065Z,1520538300.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:00.444Z,1520538300.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:00.459Z,1520538300.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:00.845Z,1520538300.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:00.860Z,1520538300.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:01.233Z,1520538301.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:01.254Z,1520538301.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:01.643Z,1520538301.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:01.658Z,1520538301.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:02.040Z,1520538302.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:02.055Z,1520538302.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:02.433Z,1520538302.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:02.453Z,1520538302.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:02.846Z,1520538302.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:02.861Z,1520538302.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:03.244Z,1520538303.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:03.259Z,1520538303.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:03.645Z,1520538303.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:03.660Z,1520538303.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:04.039Z,1520538304.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:04.054Z,1520538304.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:04.434Z,1520538304.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:04.454Z,1520538304.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:04.845Z,1520538304.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:04.861Z,1520538304.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:05.241Z,1520538305.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:05.257Z,1520538305.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:05.644Z,1520538305.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:05.660Z,1520538305.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:06.043Z,1520538306.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:06.063Z,1520538306.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:06.445Z,1520538306.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:06.462Z,1520538306.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:06.835Z,1520538306.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:06.850Z,1520538306.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:07.235Z,1520538307.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:07.254Z,1520538307.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:07.642Z,1520538307.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:07.658Z,1520538307.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:08.038Z,1520538308.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:08.053Z,1520538308.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:08.442Z,1520538308.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:08.463Z,1520538308.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:08.845Z,1520538308.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:08.861Z,1520538308.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:09.249Z,1520538309.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:09.264Z,1520538309.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:09.643Z,1520538309.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:09.659Z,1520538309.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:10.056Z,1520538310.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:10.084Z,1520538310.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:10.430Z,1520538310.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:10.467Z,1520538310.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:10.871Z,1520538310.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:10.908Z,1520538310.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:11.232Z,1520538311.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:11.271Z,1520538311.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:11.652Z,1520538311.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:11.675Z,1520538311.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:12.055Z,1520538312.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:12.079Z,1520538312.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:12.443Z,1520538312.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:12.483Z,1520538312.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:12.838Z,1520538312.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:12.869Z,1520538312.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:13.232Z,1520538313.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:13.247Z,1520538313.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:13.636Z,1520538313.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:13.652Z,1520538313.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:14.041Z,1520538314.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:14.055Z,1520538314.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:14.431Z,1520538314.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:14.447Z,1520538314.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:14.849Z,1520538314.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:14.873Z,1520538314.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:15.264Z,1520538315.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:15.279Z,1520538315.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:15.645Z,1520538315.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:15.675Z,1520538315.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:16.038Z,1520538316.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:16.058Z,1520538316.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:16.436Z,1520538316.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:16.451Z,1520538316.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:16.842Z,1520538316.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:16.862Z,1520538316.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:17.238Z,1520538317.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:17.254Z,1520538317.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:17.645Z,1520538317.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:17.660Z,1520538317.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:18.053Z,1520538318.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:18.084Z,1520538318.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:18.446Z,1520538318.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:18.461Z,1520538318.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:18.840Z,1520538318.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:18.855Z,1520538318.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:19.239Z,1520538319.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:19.255Z,1520538319.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:19.639Z,1520538319.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:19.655Z,1520538319.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:20.042Z,1520538320.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:20.058Z,1520538320.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:20.439Z,1520538320.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:20.455Z,1520538320.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:20.841Z,1520538320.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:20.857Z,1520538320.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:21.253Z,1520538321.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:21.285Z,1520538321.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:21.639Z,1520538321.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:21.658Z,1520538321.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:22.039Z,1520538322.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:22.055Z,1520538322.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:22.438Z,1520538322.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:22.453Z,1520538322.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:22.842Z,1520538322.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:22.858Z,1520538322.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:23.236Z,1520538323.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:23.259Z,1520538323.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:23.653Z,1520538323.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:23.685Z,1520538323.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:24.053Z,1520538324.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:24.084Z,1520538324.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:24.441Z,1520538324.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:24.457Z,1520538324.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:24.839Z,1520538324.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:24.854Z,1520538324.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:25.239Z,1520538325.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:25.255Z,1520538325.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:25.636Z,1520538325.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:25.659Z,1520538325.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:26.041Z,1520538326.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:26.056Z,1520538326.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:26.439Z,1520538326.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:26.455Z,1520538326.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:26.854Z,1520538326.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:26.885Z,1520538326.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:27.290Z,1520538327.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:27.350Z,1520538327.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:27.644Z,1520538327.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:27.659Z,1520538327.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:28.038Z,1520538328.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:28.053Z,1520538328.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:28.438Z,1520538328.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:28.453Z,1520538328.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:28.845Z,1520538328.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:28.860Z,1520538328.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:29.242Z,1520538329.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:29.257Z,1520538329.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:29.645Z,1520538329.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:29.660Z,1520538329.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:30.043Z,1520538330.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:30.066Z,1520538330.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:30.445Z,1520538330.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:30.461Z,1520538330.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:30.842Z,1520538330.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:30.857Z,1520538330.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:31.236Z,1520538331.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:31.251Z,1520538331.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:31.639Z,1520538331.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:31.654Z,1520538331.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:32.045Z,1520538332.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:32.060Z,1520538332.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:32.437Z,1520538332.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:32.452Z,1520538332.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:32.843Z,1520538332.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:32.863Z,1520538332.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:33.249Z,1520538333.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:33.264Z,1520538333.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:33.640Z,1520538333.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:33.663Z,1520538333.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:34.042Z,1520538334.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:34.062Z,1520538334.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:34.443Z,1520538334.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:34.458Z,1520538334.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:34.846Z,1520538334.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:34.861Z,1520538334.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:35.241Z,1520538335.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:35.256Z,1520538335.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:35.645Z,1520538335.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:35.661Z,1520538335.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:36.048Z,1520538336.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:36.070Z,1520538336.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:36.449Z,1520538336.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:36.470Z,1520538336.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:36.843Z,1520538336.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:36.858Z,1520538336.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:37.242Z,1520538337.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:37.262Z,1520538337.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:37.642Z,1520538337.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:37.663Z,1520538337.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:38.046Z,1520538338.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:38.061Z,1520538338.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:38.424Z,1520538338.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:38.459Z,1520538338.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:38.853Z,1520538338.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:38.868Z,1520538338.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:39.254Z,1520538339.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:39.269Z,1520538339.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:39.645Z,1520538339.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:39.673Z,1520538339.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:40.034Z,1520538340.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:40.061Z,1520538340.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:40.434Z,1520538340.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:40.463Z,1520538340.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:40.852Z,1520538340.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:40.874Z,1520538340.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:41.247Z,1520538341.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:41.266Z,1520538341.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:41.653Z,1520538341.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:41.674Z,1520538341.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:42.058Z,1520538342.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:42.073Z,1520538342.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:42.451Z,1520538342.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:42.476Z,1520538342.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:42.841Z,1520538342.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:42.886Z,1520538342.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:43.257Z,1520538343.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:43.272Z,1520538343.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:47.558Z,1520538347.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:47.574Z,1520538347.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:47.668Z,1520538347.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:47.712Z,1520538347.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:48.042Z,1520538348.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:48.070Z,1520538348.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:48.437Z,1520538348.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:48.469Z,1520538348.469 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:48.469Z,1520538348.469 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 240
2018-03-08T19:45:48.469Z,1520538348.469 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T19:45:48.471Z,1520538348.471 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:48.471Z,1520538348.471 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 240
2018-03-08T19:45:48.471Z,1520538348.471 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T19:45:48.473Z,1520538348.473 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:48.473Z,1520538348.473 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 240
2018-03-08T19:45:48.473Z,1520538348.473 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T19:45:48.486Z,1520538348.486 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T19:45:48.486Z,1520538348.486 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T19:45:48.486Z,1520538348.486 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T19:45:48.833Z,1520538348.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:48.875Z,1520538348.875 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T19:45:48.875Z,1520538348.875 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 240
2018-03-08T19:45:48.876Z,1520538348.876 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T19:45:48.876Z,1520538348.876 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 240
2018-03-08T19:45:48.876Z,1520538348.876 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T19:45:48.880Z,1520538348.880 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 240
2018-03-08T19:45:49.230Z,1520538349.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:49.249Z,1520538349.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T19:45:49.250Z,1520538349.250 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:45:49.250Z,1520538349.250 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:45:49.251Z,1520538349.251 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T19:45:49.251Z,1520538349.251 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:45:49.251Z,1520538349.251 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:45:49.252Z,1520538349.252 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T19:45:49.252Z,1520538349.252 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:45:49.268Z,1520538349.268 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:45:49.626Z,1520538349.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:49.641Z,1520538349.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T19:45:49.642Z,1520538349.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:50.033Z,1520538350.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:50.049Z,1520538350.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T19:45:50.050Z,1520538350.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:50.430Z,1520538350.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:50.445Z,1520538350.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T19:45:50.445Z,1520538350.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:50.837Z,1520538350.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:50.852Z,1520538350.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T19:45:50.853Z,1520538350.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:51.237Z,1520538351.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:51.252Z,1520538351.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T19:45:51.253Z,1520538351.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:51.633Z,1520538351.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:51.648Z,1520538351.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T19:45:51.649Z,1520538351.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:52.027Z,1520538352.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:52.041Z,1520538352.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T19:45:52.042Z,1520538352.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:52.425Z,1520538352.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:52.446Z,1520538352.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T19:45:52.447Z,1520538352.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:52.834Z,1520538352.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:52.849Z,1520538352.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T19:45:52.850Z,1520538352.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:53.231Z,1520538353.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:53.245Z,1520538353.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T19:45:53.246Z,1520538353.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:53.633Z,1520538353.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:53.648Z,1520538353.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T19:45:53.649Z,1520538353.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:54.037Z,1520538354.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:54.052Z,1520538354.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T19:45:54.053Z,1520538354.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:54.433Z,1520538354.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:54.454Z,1520538354.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T19:45:54.455Z,1520538354.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:54.824Z,1520538354.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:54.847Z,1520538354.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T19:45:54.848Z,1520538354.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:55.232Z,1520538355.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:55.247Z,1520538355.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T19:45:55.248Z,1520538355.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:55.624Z,1520538355.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:55.639Z,1520538355.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T19:45:55.640Z,1520538355.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:56.019Z,1520538356.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:56.042Z,1520538356.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T19:45:56.043Z,1520538356.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:56.430Z,1520538356.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:56.450Z,1520538356.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T19:45:56.451Z,1520538356.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:56.836Z,1520538356.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:56.851Z,1520538356.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T19:45:56.852Z,1520538356.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:57.235Z,1520538357.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:57.258Z,1520538357.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T19:45:57.259Z,1520538357.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:57.636Z,1520538357.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:57.651Z,1520538357.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T19:45:57.652Z,1520538357.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:58.023Z,1520538358.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:58.042Z,1520538358.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T19:45:58.042Z,1520538358.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:58.431Z,1520538358.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:58.445Z,1520538358.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T19:45:58.446Z,1520538358.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:58.830Z,1520538358.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:58.845Z,1520538358.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T19:45:58.846Z,1520538358.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:59.223Z,1520538359.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:59.238Z,1520538359.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T19:45:59.239Z,1520538359.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:45:59.634Z,1520538359.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:45:59.658Z,1520538359.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T19:45:59.659Z,1520538359.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:00.039Z,1520538360.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:00.054Z,1520538360.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T19:46:00.055Z,1520538360.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:00.441Z,1520538360.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:00.462Z,1520538360.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T19:46:00.463Z,1520538360.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:00.816Z,1520538360.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:00.841Z,1520538360.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T19:46:00.842Z,1520538360.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:01.225Z,1520538361.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:01.251Z,1520538361.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T19:46:01.252Z,1520538361.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:01.631Z,1520538361.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:01.646Z,1520538361.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T19:46:01.647Z,1520538361.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:02.034Z,1520538362.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:02.049Z,1520538362.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T19:46:02.050Z,1520538362.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:02.431Z,1520538362.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:02.446Z,1520538362.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T19:46:02.447Z,1520538362.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:02.833Z,1520538362.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:02.854Z,1520538362.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T19:46:02.855Z,1520538362.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:03.237Z,1520538363.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:03.251Z,1520538363.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T19:46:03.253Z,1520538363.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:03.640Z,1520538363.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:03.662Z,1520538363.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T19:46:03.663Z,1520538363.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:04.031Z,1520538364.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:04.045Z,1520538364.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T19:46:04.046Z,1520538364.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:04.430Z,1520538364.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:04.450Z,1520538364.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T19:46:04.451Z,1520538364.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:04.829Z,1520538364.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:04.845Z,1520538364.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T19:46:04.846Z,1520538364.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:05.228Z,1520538365.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:05.250Z,1520538365.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T19:46:05.251Z,1520538365.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:05.640Z,1520538365.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:05.662Z,1520538365.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T19:46:05.663Z,1520538365.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:06.043Z,1520538366.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:06.062Z,1520538366.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T19:46:06.063Z,1520538366.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:06.441Z,1520538366.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:06.456Z,1520538366.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T19:46:06.457Z,1520538366.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:06.820Z,1520538366.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:06.845Z,1520538366.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T19:46:06.846Z,1520538366.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:07.219Z,1520538367.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:07.251Z,1520538367.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T19:46:07.251Z,1520538367.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:07.622Z,1520538367.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:07.649Z,1520538367.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T19:46:07.650Z,1520538367.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:08.021Z,1520538368.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:08.048Z,1520538368.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T19:46:08.049Z,1520538368.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:08.419Z,1520538368.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:08.446Z,1520538368.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T19:46:08.447Z,1520538368.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:08.842Z,1520538368.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:08.857Z,1520538368.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:09.246Z,1520538369.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:09.266Z,1520538369.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:09.637Z,1520538369.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:09.652Z,1520538369.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:10.019Z,1520538370.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:10.051Z,1520538370.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:10.422Z,1520538370.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:10.448Z,1520538370.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:10.821Z,1520538370.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:10.859Z,1520538370.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:11.214Z,1520538371.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:11.251Z,1520538371.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:11.641Z,1520538371.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:11.657Z,1520538371.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:12.042Z,1520538372.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:12.057Z,1520538372.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:12.425Z,1520538372.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:12.460Z,1520538372.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:12.822Z,1520538372.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:12.848Z,1520538372.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:13.218Z,1520538373.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:13.250Z,1520538373.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:13.614Z,1520538373.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:13.652Z,1520538373.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:14.021Z,1520538374.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:14.050Z,1520538374.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:14.419Z,1520538374.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:14.450Z,1520538374.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:14.843Z,1520538374.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:14.858Z,1520538374.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:15.241Z,1520538375.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:15.256Z,1520538375.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:15.629Z,1520538375.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:15.667Z,1520538375.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:16.022Z,1520538376.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:16.063Z,1520538376.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:16.423Z,1520538376.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:16.458Z,1520538376.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:16.822Z,1520538376.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:16.853Z,1520538376.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:17.225Z,1520538377.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:17.240Z,1520538377.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:17.630Z,1520538377.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:17.686Z,1520538377.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:18.033Z,1520538378.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:18.062Z,1520538378.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:18.473Z,1520538378.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:18.488Z,1520538378.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:18.816Z,1520538378.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:18.839Z,1520538378.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:19.230Z,1520538379.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:19.250Z,1520538379.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:19.619Z,1520538379.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:19.658Z,1520538379.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:20.035Z,1520538380.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:20.050Z,1520538380.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:20.439Z,1520538380.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:20.454Z,1520538380.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:20.839Z,1520538380.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:20.855Z,1520538380.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:21.236Z,1520538381.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:21.259Z,1520538381.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:21.646Z,1520538381.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:21.666Z,1520538381.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:22.023Z,1520538382.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:22.052Z,1520538382.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:22.415Z,1520538382.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:22.447Z,1520538382.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:22.820Z,1520538382.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:22.860Z,1520538382.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:23.222Z,1520538383.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:23.250Z,1520538383.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:23.629Z,1520538383.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:23.653Z,1520538383.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:24.041Z,1520538384.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:24.057Z,1520538384.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:24.434Z,1520538384.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:24.454Z,1520538384.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:24.816Z,1520538384.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:24.848Z,1520538384.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:25.219Z,1520538385.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:25.250Z,1520538385.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:25.622Z,1520538385.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:25.656Z,1520538385.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:26.025Z,1520538386.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:26.053Z,1520538386.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:26.422Z,1520538386.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:26.454Z,1520538386.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:26.829Z,1520538386.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:26.857Z,1520538386.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:27.229Z,1520538387.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:27.263Z,1520538387.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:27.633Z,1520538387.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:27.667Z,1520538387.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:28.014Z,1520538388.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:28.034Z,1520538388.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:28.420Z,1520538388.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:28.436Z,1520538388.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:28.829Z,1520538388.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:28.844Z,1520538388.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:29.226Z,1520538389.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:29.241Z,1520538389.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:29.625Z,1520538389.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:29.641Z,1520538389.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:30.041Z,1520538390.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:30.066Z,1520538390.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:30.438Z,1520538390.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:30.470Z,1520538390.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:30.820Z,1520538390.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:30.836Z,1520538390.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:31.227Z,1520538391.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:31.242Z,1520538391.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:31.628Z,1520538391.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:31.643Z,1520538391.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:32.031Z,1520538392.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:32.046Z,1520538392.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:32.428Z,1520538392.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:32.443Z,1520538392.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:32.841Z,1520538392.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:32.872Z,1520538392.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:33.231Z,1520538393.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:33.246Z,1520538393.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:33.642Z,1520538393.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:33.671Z,1520538393.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:34.023Z,1520538394.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:34.050Z,1520538394.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:34.423Z,1520538394.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:34.438Z,1520538394.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:34.827Z,1520538394.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:34.847Z,1520538394.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:35.227Z,1520538395.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:35.243Z,1520538395.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:35.625Z,1520538395.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:35.647Z,1520538395.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:36.037Z,1520538396.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:36.052Z,1520538396.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:36.440Z,1520538396.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:36.455Z,1520538396.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:36.815Z,1520538396.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:36.842Z,1520538396.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:37.230Z,1520538397.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:37.245Z,1520538397.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:37.627Z,1520538397.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:37.642Z,1520538397.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:38.027Z,1520538398.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:38.042Z,1520538398.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:38.430Z,1520538398.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:38.445Z,1520538398.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:38.832Z,1520538398.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:38.848Z,1520538398.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:39.231Z,1520538399.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:39.254Z,1520538399.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:39.633Z,1520538399.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:39.649Z,1520538399.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:40.031Z,1520538400.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:40.046Z,1520538400.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:40.422Z,1520538400.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:40.437Z,1520538400.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:40.834Z,1520538400.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:40.854Z,1520538400.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:41.230Z,1520538401.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:41.245Z,1520538401.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:41.632Z,1520538401.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:41.647Z,1520538401.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:42.037Z,1520538402.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:42.052Z,1520538402.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:42.433Z,1520538402.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:42.454Z,1520538402.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:42.816Z,1520538402.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:42.847Z,1520538402.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:43.230Z,1520538403.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:43.250Z,1520538403.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:43.631Z,1520538403.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:43.646Z,1520538403.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:46.738Z,1520538406.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:46.754Z,1520538406.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:46.857Z,1520538406.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:46.890Z,1520538406.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:47.237Z,1520538407.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:47.253Z,1520538407.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:47.641Z,1520538407.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:47.656Z,1520538407.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:48.041Z,1520538408.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:48.057Z,1520538408.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:48.431Z,1520538408.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:48.446Z,1520538408.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:48.837Z,1520538408.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:48.852Z,1520538408.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:49.234Z,1520538409.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:49.254Z,1520538409.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:49.638Z,1520538409.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:49.654Z,1520538409.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:50.041Z,1520538410.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:50.056Z,1520538410.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:50.437Z,1520538410.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:50.453Z,1520538410.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:50.834Z,1520538410.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:50.849Z,1520538410.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:51.233Z,1520538411.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:51.248Z,1520538411.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:51.634Z,1520538411.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:51.650Z,1520538411.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:52.033Z,1520538412.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:52.049Z,1520538412.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:52.434Z,1520538412.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:52.449Z,1520538412.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:52.837Z,1520538412.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:52.853Z,1520538412.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:53.241Z,1520538413.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:53.256Z,1520538413.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:53.637Z,1520538413.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:53.658Z,1520538413.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:54.032Z,1520538414.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:54.047Z,1520538414.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:54.435Z,1520538414.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:54.458Z,1520538414.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:54.838Z,1520538414.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:54.853Z,1520538414.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:55.234Z,1520538415.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:55.249Z,1520538415.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:55.637Z,1520538415.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:55.653Z,1520538415.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:56.041Z,1520538416.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:56.056Z,1520538416.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:56.438Z,1520538416.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:56.453Z,1520538416.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:56.834Z,1520538416.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:56.849Z,1520538416.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:57.235Z,1520538417.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:57.250Z,1520538417.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:57.629Z,1520538417.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:57.644Z,1520538417.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:58.032Z,1520538418.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:58.060Z,1520538418.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:58.436Z,1520538418.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:58.451Z,1520538418.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:58.832Z,1520538418.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:58.851Z,1520538418.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:59.242Z,1520538419.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:59.262Z,1520538419.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:46:59.640Z,1520538419.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:46:59.655Z,1520538419.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:00.035Z,1520538420.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:00.058Z,1520538420.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:00.435Z,1520538420.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:00.454Z,1520538420.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:00.839Z,1520538420.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:00.854Z,1520538420.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:01.234Z,1520538421.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:01.258Z,1520538421.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:01.638Z,1520538421.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:01.659Z,1520538421.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:02.040Z,1520538422.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:02.056Z,1520538422.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:02.438Z,1520538422.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:02.459Z,1520538422.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:02.830Z,1520538422.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:02.845Z,1520538422.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:03.230Z,1520538423.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:03.245Z,1520538423.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:03.616Z,1520538423.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:03.648Z,1520538423.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:04.044Z,1520538424.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:04.059Z,1520538424.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:04.429Z,1520538424.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:04.454Z,1520538424.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:04.841Z,1520538424.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:04.856Z,1520538424.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:05.242Z,1520538425.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:05.262Z,1520538425.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:05.644Z,1520538425.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:05.659Z,1520538425.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:06.034Z,1520538426.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:06.054Z,1520538426.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:06.429Z,1520538426.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:06.449Z,1520538426.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:06.836Z,1520538426.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:06.851Z,1520538426.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:07.234Z,1520538427.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:07.254Z,1520538427.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:07.641Z,1520538427.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:07.662Z,1520538427.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:08.045Z,1520538428.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:08.060Z,1520538428.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:08.444Z,1520538428.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:08.460Z,1520538428.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:08.835Z,1520538428.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:08.850Z,1520538428.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:09.233Z,1520538429.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:09.248Z,1520538429.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:09.620Z,1520538429.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:09.647Z,1520538429.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:10.038Z,1520538430.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:10.058Z,1520538430.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:10.432Z,1520538430.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:10.447Z,1520538430.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:10.841Z,1520538430.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:10.866Z,1520538430.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:11.244Z,1520538431.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:11.259Z,1520538431.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:11.645Z,1520538431.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:11.660Z,1520538431.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:12.020Z,1520538432.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:12.051Z,1520538432.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:12.435Z,1520538432.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:12.454Z,1520538432.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:12.821Z,1520538432.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:12.850Z,1520538432.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:13.235Z,1520538433.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:13.258Z,1520538433.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:13.642Z,1520538433.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:13.662Z,1520538433.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:14.048Z,1520538434.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:14.063Z,1520538434.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:14.441Z,1520538434.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:14.457Z,1520538434.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:14.823Z,1520538434.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:14.854Z,1520538434.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:15.238Z,1520538435.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:15.253Z,1520538435.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:15.620Z,1520538435.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:15.653Z,1520538435.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:16.039Z,1520538436.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:16.058Z,1520538436.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:16.426Z,1520538436.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:16.454Z,1520538436.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:16.833Z,1520538436.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:16.855Z,1520538436.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:17.245Z,1520538437.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:17.260Z,1520538437.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:17.638Z,1520538437.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:17.654Z,1520538437.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:18.020Z,1520538438.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:18.054Z,1520538438.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:18.423Z,1520538438.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:18.459Z,1520538438.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:18.829Z,1520538438.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:18.857Z,1520538438.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:19.220Z,1520538439.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:19.248Z,1520538439.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:19.645Z,1520538439.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:19.660Z,1520538439.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:20.033Z,1520538440.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:20.068Z,1520538440.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:20.446Z,1520538440.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:20.461Z,1520538440.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:20.823Z,1520538440.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:20.854Z,1520538440.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:21.221Z,1520538441.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:21.236Z,1520538441.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:21.616Z,1520538441.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:21.631Z,1520538441.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:22.029Z,1520538442.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:22.060Z,1520538442.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:22.426Z,1520538442.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:22.441Z,1520538442.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:22.829Z,1520538442.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:22.857Z,1520538442.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:23.245Z,1520538443.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:23.274Z,1520538443.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:23.641Z,1520538443.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:23.666Z,1520538443.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:24.023Z,1520538444.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:24.039Z,1520538444.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:24.430Z,1520538444.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:24.466Z,1520538444.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:24.833Z,1520538444.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:24.848Z,1520538444.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:25.223Z,1520538445.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:25.239Z,1520538445.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:25.641Z,1520538445.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:25.672Z,1520538445.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:26.045Z,1520538446.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:26.077Z,1520538446.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:26.430Z,1520538446.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:26.450Z,1520538446.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:26.838Z,1520538446.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:26.854Z,1520538446.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:27.231Z,1520538447.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:27.246Z,1520538447.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:27.628Z,1520538447.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:27.643Z,1520538447.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:28.033Z,1520538448.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:28.048Z,1520538448.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:28.431Z,1520538448.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:28.446Z,1520538448.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:28.833Z,1520538448.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:28.855Z,1520538448.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:29.245Z,1520538449.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:29.260Z,1520538449.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:29.637Z,1520538449.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:29.658Z,1520538449.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:30.029Z,1520538450.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:30.044Z,1520538450.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:30.430Z,1520538450.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:30.450Z,1520538450.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:30.838Z,1520538450.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:30.853Z,1520538450.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:31.234Z,1520538451.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:31.249Z,1520538451.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:31.637Z,1520538451.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:31.653Z,1520538451.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:32.036Z,1520538452.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:32.058Z,1520538452.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:32.434Z,1520538452.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:32.454Z,1520538452.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:32.834Z,1520538452.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:32.850Z,1520538452.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:33.235Z,1520538453.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:33.250Z,1520538453.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:33.619Z,1520538453.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:33.649Z,1520538453.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:34.031Z,1520538454.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:34.052Z,1520538454.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:34.427Z,1520538454.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:34.446Z,1520538454.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:34.838Z,1520538454.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:34.859Z,1520538454.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:35.241Z,1520538455.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:35.256Z,1520538455.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:35.637Z,1520538455.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:35.652Z,1520538455.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:36.035Z,1520538456.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:36.051Z,1520538456.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:36.434Z,1520538456.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:36.454Z,1520538456.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:36.835Z,1520538456.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:36.851Z,1520538456.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:37.236Z,1520538457.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:37.252Z,1520538457.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:37.638Z,1520538457.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:37.653Z,1520538457.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:38.041Z,1520538458.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:38.056Z,1520538458.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:38.436Z,1520538458.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:38.452Z,1520538458.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:38.835Z,1520538458.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:38.850Z,1520538458.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:39.224Z,1520538459.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:39.250Z,1520538459.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:39.628Z,1520538459.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:39.648Z,1520538459.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:40.038Z,1520538460.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:40.054Z,1520538460.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:40.425Z,1520538460.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:40.451Z,1520538460.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:40.836Z,1520538460.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:40.857Z,1520538460.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:41.241Z,1520538461.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:41.257Z,1520538461.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:41.665Z,1520538461.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:41.732Z,1520538461.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:42.031Z,1520538462.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:42.059Z,1520538462.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:42.433Z,1520538462.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:42.457Z,1520538462.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:42.460Z,1520538462.460 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T19:42:42.4Z
2018-03-08T19:47:42.460Z,1520538462.460 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T19:47:42.460Z,1520538462.460 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T19:47:42.837Z,1520538462.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:42.867Z,1520538462.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:43.504Z,1520538463.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:43.553Z,1520538463.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:43.698Z,1520538463.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:43.747Z,1520538463.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:44.098Z,1520538464.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:44.114Z,1520538464.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:47.790Z,1520538467.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:47.806Z,1520538467.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:47.897Z,1520538467.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:47.925Z,1520538467.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:48.233Z,1520538468.233 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20180308T074127/Courier0280.lzma
2018-03-08T19:47:48.273Z,1520538468.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:48.288Z,1520538468.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:48.667Z,1520538468.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:48.691Z,1520538468.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:49.033Z,1520538469.033 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0280.lzma.bak
2018-03-08T19:47:49.034Z,1520538469.034 [DataOverHttps](INFO): SBD MOMSN=7988596
2018-03-08T19:47:49.068Z,1520538469.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:49.091Z,1520538469.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:49.642Z,1520538469.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:49.666Z,1520538469.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:49.877Z,1520538469.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:49.892Z,1520538469.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:50.273Z,1520538470.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:50.288Z,1520538470.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:53.415Z,1520538473.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:53.438Z,1520538473.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:53.538Z,1520538473.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:53.568Z,1520538473.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:53.927Z,1520538473.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:53.943Z,1520538473.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:54.323Z,1520538474.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:54.338Z,1520538474.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:54.726Z,1520538474.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:54.747Z,1520538474.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:55.123Z,1520538475.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:55.139Z,1520538475.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:55.533Z,1520538475.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:55.549Z,1520538475.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:58.659Z,1520538478.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:58.679Z,1520538478.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:58.793Z,1520538478.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:58.839Z,1520538478.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:59.112Z,1520538479.112 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0281.lzma
2018-03-08T19:47:59.132Z,1520538479.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:59.148Z,1520538479.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:59.538Z,1520538479.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:59.575Z,1520538479.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:47:59.908Z,1520538479.908 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0281.lzma.bak
2018-03-08T19:47:59.908Z,1520538479.908 [DataOverHttps](INFO): SBD MOMSN=7988600
2018-03-08T19:47:59.947Z,1520538479.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:47:59.980Z,1520538479.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:00.522Z,1520538480.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:00.539Z,1520538480.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:00.542Z,1520538480.542 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T19:48:00.542Z,1520538480.542 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T19:48:00.542Z,1520538480.542 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T19:48:00.737Z,1520538480.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:00.759Z,1520538480.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:01.149Z,1520538481.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:01.164Z,1520538481.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:04.237Z,1520538484.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:04.262Z,1520538484.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:04.357Z,1520538484.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:04.389Z,1520538484.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:04.757Z,1520538484.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:04.772Z,1520538484.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:05.157Z,1520538485.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:05.172Z,1520538485.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:05.569Z,1520538485.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:05.600Z,1520538485.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:05.965Z,1520538485.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:05.980Z,1520538485.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:06.370Z,1520538486.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:06.406Z,1520538486.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:06.752Z,1520538486.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:06.768Z,1520538486.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:07.156Z,1520538487.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:07.171Z,1520538487.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:07.556Z,1520538487.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:07.571Z,1520538487.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:07.959Z,1520538487.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:07.975Z,1520538487.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:08.355Z,1520538488.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:08.374Z,1520538488.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:08.768Z,1520538488.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:08.783Z,1520538488.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:09.162Z,1520538489.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:09.177Z,1520538489.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:09.562Z,1520538489.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:09.577Z,1520538489.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:09.960Z,1520538489.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:09.975Z,1520538489.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:10.350Z,1520538490.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:10.369Z,1520538490.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:10.758Z,1520538490.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:10.774Z,1520538490.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:11.149Z,1520538491.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:11.171Z,1520538491.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:11.560Z,1520538491.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:11.583Z,1520538491.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:11.961Z,1520538491.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:11.977Z,1520538491.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:12.361Z,1520538492.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:12.376Z,1520538492.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:12.751Z,1520538492.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:12.767Z,1520538492.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:13.154Z,1520538493.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:13.169Z,1520538493.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:13.558Z,1520538493.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:13.573Z,1520538493.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:13.960Z,1520538493.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:13.975Z,1520538493.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:14.356Z,1520538494.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:14.406Z,1520538494.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:14.777Z,1520538494.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:14.807Z,1520538494.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:15.158Z,1520538495.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:15.178Z,1520538495.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:15.561Z,1520538495.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:15.577Z,1520538495.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:15.952Z,1520538495.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:15.967Z,1520538495.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:16.358Z,1520538496.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:16.373Z,1520538496.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:16.766Z,1520538496.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:16.781Z,1520538496.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:17.158Z,1520538497.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:17.173Z,1520538497.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:17.559Z,1520538497.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:17.583Z,1520538497.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:17.965Z,1520538497.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:17.986Z,1520538497.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:18.364Z,1520538498.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:18.379Z,1520538498.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:18.745Z,1520538498.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:18.772Z,1520538498.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:19.158Z,1520538499.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:19.179Z,1520538499.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:19.559Z,1520538499.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:19.574Z,1520538499.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:19.959Z,1520538499.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:19.974Z,1520538499.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:20.349Z,1520538500.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:20.373Z,1520538500.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:20.769Z,1520538500.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:20.790Z,1520538500.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:21.161Z,1520538501.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:21.182Z,1520538501.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:21.569Z,1520538501.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:21.590Z,1520538501.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:21.960Z,1520538501.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:21.975Z,1520538501.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:22.358Z,1520538502.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:22.378Z,1520538502.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:22.763Z,1520538502.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:22.779Z,1520538502.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:23.142Z,1520538503.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:23.170Z,1520538503.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:23.565Z,1520538503.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:23.581Z,1520538503.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:23.968Z,1520538503.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:23.984Z,1520538503.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:24.369Z,1520538504.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:24.384Z,1520538504.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:24.740Z,1520538504.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:24.774Z,1520538504.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:25.158Z,1520538505.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:25.179Z,1520538505.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:25.560Z,1520538505.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:25.575Z,1520538505.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:25.962Z,1520538505.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:25.982Z,1520538505.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:26.358Z,1520538506.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:26.374Z,1520538506.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:26.766Z,1520538506.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:26.781Z,1520538506.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:27.165Z,1520538507.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:27.183Z,1520538507.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:27.568Z,1520538507.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:27.590Z,1520538507.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:27.958Z,1520538507.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:27.973Z,1520538507.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:28.353Z,1520538508.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:28.369Z,1520538508.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:28.758Z,1520538508.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:28.778Z,1520538508.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:29.153Z,1520538509.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:29.174Z,1520538509.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:29.564Z,1520538509.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:29.580Z,1520538509.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:29.967Z,1520538509.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:29.983Z,1520538509.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:30.363Z,1520538510.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:30.378Z,1520538510.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:30.744Z,1520538510.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:30.770Z,1520538510.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:31.149Z,1520538511.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:31.173Z,1520538511.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:31.553Z,1520538511.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:31.569Z,1520538511.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:31.955Z,1520538511.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:31.982Z,1520538511.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:32.357Z,1520538512.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:32.378Z,1520538512.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:32.760Z,1520538512.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:32.790Z,1520538512.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:33.165Z,1520538513.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:33.243Z,1520538513.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:33.568Z,1520538513.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:33.583Z,1520538513.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:33.946Z,1520538513.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:33.978Z,1520538513.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:34.358Z,1520538514.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:34.378Z,1520538514.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:34.757Z,1520538514.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:34.787Z,1520538514.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:35.151Z,1520538515.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:35.178Z,1520538515.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:35.561Z,1520538515.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:35.577Z,1520538515.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:35.969Z,1520538515.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:35.984Z,1520538515.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:36.364Z,1520538516.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:36.379Z,1520538516.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:36.740Z,1520538516.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:36.764Z,1520538516.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:37.145Z,1520538517.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:37.183Z,1520538517.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:37.550Z,1520538517.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:37.583Z,1520538517.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:37.950Z,1520538517.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:37.984Z,1520538517.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:38.345Z,1520538518.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:38.382Z,1520538518.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:38.757Z,1520538518.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:38.785Z,1520538518.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:39.157Z,1520538519.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:39.192Z,1520538519.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:39.569Z,1520538519.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:39.584Z,1520538519.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:39.947Z,1520538519.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:40.000Z,1520538520.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:40.350Z,1520538520.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:40.382Z,1520538520.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:40.749Z,1520538520.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:40.780Z,1520538520.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:41.150Z,1520538521.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:41.190Z,1520538521.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:41.553Z,1520538521.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:41.589Z,1520538521.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:41.966Z,1520538521.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:41.993Z,1520538521.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:42.356Z,1520538522.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:42.393Z,1520538522.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:42.744Z,1520538522.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:42.759Z,1520538522.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:43.150Z,1520538523.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:43.167Z,1520538523.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:43.554Z,1520538523.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:43.569Z,1520538523.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:43.957Z,1520538523.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:43.991Z,1520538523.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:44.354Z,1520538524.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:44.374Z,1520538524.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:44.765Z,1520538524.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:44.807Z,1520538524.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:45.160Z,1520538525.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:45.176Z,1520538525.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:45.565Z,1520538525.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:45.581Z,1520538525.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:45.959Z,1520538525.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:45.974Z,1520538525.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:46.359Z,1520538526.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:46.374Z,1520538526.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:46.760Z,1520538526.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:46.775Z,1520538526.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:47.148Z,1520538527.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:47.174Z,1520538527.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:47.560Z,1520538527.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:47.576Z,1520538527.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:47.965Z,1520538527.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:47.986Z,1520538527.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:48.364Z,1520538528.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:48.380Z,1520538528.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:48.752Z,1520538528.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:48.769Z,1520538528.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:49.149Z,1520538529.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:49.172Z,1520538529.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:49.556Z,1520538529.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:49.571Z,1520538529.571 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:49.571Z,1520538529.571 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 241
2018-03-08T19:48:49.571Z,1520538529.571 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T19:48:49.573Z,1520538529.573 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:49.573Z,1520538529.573 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 241
2018-03-08T19:48:49.573Z,1520538529.573 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T19:48:49.575Z,1520538529.575 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:49.575Z,1520538529.575 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 241
2018-03-08T19:48:49.575Z,1520538529.575 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T19:48:49.587Z,1520538529.587 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T19:48:49.587Z,1520538529.587 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T19:48:49.587Z,1520538529.587 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T19:48:49.952Z,1520538529.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:50.007Z,1520538530.007 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T19:48:50.007Z,1520538530.007 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 241
2018-03-08T19:48:50.007Z,1520538530.007 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T19:48:50.007Z,1520538530.007 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 241
2018-03-08T19:48:50.008Z,1520538530.008 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T19:48:50.008Z,1520538530.008 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 241
2018-03-08T19:48:50.359Z,1520538530.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:50.373Z,1520538530.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T19:48:50.374Z,1520538530.374 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:48:50.374Z,1520538530.374 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:48:50.374Z,1520538530.374 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T19:48:50.375Z,1520538530.375 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:48:50.375Z,1520538530.375 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:48:50.376Z,1520538530.376 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T19:48:50.376Z,1520538530.376 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:48:50.376Z,1520538530.376 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:48:50.765Z,1520538530.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:50.782Z,1520538530.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T19:48:50.783Z,1520538530.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:51.169Z,1520538531.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:51.184Z,1520538531.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T19:48:51.185Z,1520538531.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:51.565Z,1520538531.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:51.586Z,1520538531.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T19:48:51.587Z,1520538531.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:51.941Z,1520538531.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:51.976Z,1520538531.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T19:48:51.977Z,1520538531.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:52.357Z,1520538532.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:52.377Z,1520538532.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T19:48:52.378Z,1520538532.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:52.770Z,1520538532.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:52.790Z,1520538532.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T19:48:52.791Z,1520538532.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:53.158Z,1520538533.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:53.173Z,1520538533.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T19:48:53.174Z,1520538533.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:53.566Z,1520538533.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:53.666Z,1520538533.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-03-08T19:48:53.667Z,1520538533.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:53.971Z,1520538533.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:53.986Z,1520538533.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T19:48:53.987Z,1520538533.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:54.370Z,1520538534.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:54.384Z,1520538534.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T19:48:54.385Z,1520538534.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:54.742Z,1520538534.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:54.768Z,1520538534.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T19:48:54.769Z,1520538534.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:55.145Z,1520538535.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:55.178Z,1520538535.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T19:48:55.179Z,1520538535.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:55.546Z,1520538535.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:55.573Z,1520538535.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T19:48:55.574Z,1520538535.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:55.962Z,1520538535.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:55.982Z,1520538535.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T19:48:55.983Z,1520538535.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:56.415Z,1520538536.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:56.434Z,1520538536.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-08T19:48:56.435Z,1520538536.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:56.765Z,1520538536.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:56.780Z,1520538536.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T19:48:56.781Z,1520538536.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:57.172Z,1520538537.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:57.187Z,1520538537.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T19:48:57.188Z,1520538537.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:57.566Z,1520538537.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:57.586Z,1520538537.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T19:48:57.587Z,1520538537.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:57.959Z,1520538537.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:57.974Z,1520538537.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T19:48:57.975Z,1520538537.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:58.347Z,1520538538.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:58.381Z,1520538538.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T19:48:58.382Z,1520538538.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:58.753Z,1520538538.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:58.777Z,1520538538.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T19:48:58.778Z,1520538538.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:59.147Z,1520538539.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:59.174Z,1520538539.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T19:48:59.175Z,1520538539.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:59.561Z,1520538539.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:59.584Z,1520538539.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T19:48:59.585Z,1520538539.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:48:59.970Z,1520538539.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:48:59.985Z,1520538539.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T19:48:59.985Z,1520538539.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:00.362Z,1520538540.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:00.378Z,1520538540.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T19:49:00.379Z,1520538540.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:00.741Z,1520538540.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:00.763Z,1520538540.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T19:49:00.765Z,1520538540.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:01.147Z,1520538541.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:01.186Z,1520538541.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T19:49:01.187Z,1520538541.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:04.269Z,1520538544.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:04.285Z,1520538544.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-03-08T19:49:04.285Z,1520538544.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:04.382Z,1520538544.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:04.425Z,1520538544.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T19:49:04.426Z,1520538544.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:04.753Z,1520538544.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:04.777Z,1520538544.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T19:49:04.778Z,1520538544.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:05.149Z,1520538545.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:05.183Z,1520538545.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T19:49:05.184Z,1520538545.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:05.545Z,1520538545.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:05.560Z,1520538545.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T19:49:05.573Z,1520538545.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:05.936Z,1520538545.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:05.959Z,1520538545.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T19:49:05.959Z,1520538545.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:06.340Z,1520538546.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:06.355Z,1520538546.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T19:49:06.355Z,1520538546.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:06.742Z,1520538546.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:06.762Z,1520538546.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T19:49:06.763Z,1520538546.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:07.139Z,1520538547.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:07.154Z,1520538547.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T19:49:07.155Z,1520538547.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:07.541Z,1520538547.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:07.557Z,1520538547.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T19:49:07.558Z,1520538547.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:07.942Z,1520538547.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:07.957Z,1520538547.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T19:49:07.958Z,1520538547.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:08.353Z,1520538548.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:08.368Z,1520538548.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T19:49:08.385Z,1520538548.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:08.743Z,1520538548.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:08.758Z,1520538548.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T19:49:08.759Z,1520538548.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:09.134Z,1520538549.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:09.148Z,1520538549.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T19:49:09.149Z,1520538549.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:09.537Z,1520538549.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:09.552Z,1520538549.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T19:49:09.553Z,1520538549.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:09.946Z,1520538549.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:09.962Z,1520538549.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:10.343Z,1520538550.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:10.359Z,1520538550.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:10.749Z,1520538550.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:10.765Z,1520538550.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:11.149Z,1520538551.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:11.165Z,1520538551.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:11.545Z,1520538551.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:11.561Z,1520538551.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:11.942Z,1520538551.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:11.957Z,1520538551.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:12.343Z,1520538552.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:12.358Z,1520538552.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:12.740Z,1520538552.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:12.771Z,1520538552.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:13.142Z,1520538553.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:13.157Z,1520538553.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:13.549Z,1520538553.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:13.571Z,1520538553.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:13.949Z,1520538553.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:13.964Z,1520538553.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:14.347Z,1520538554.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:14.366Z,1520538554.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:14.743Z,1520538554.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:14.759Z,1520538554.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:15.142Z,1520538555.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:15.162Z,1520538555.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:15.542Z,1520538555.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:15.562Z,1520538555.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:15.946Z,1520538555.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:15.967Z,1520538555.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:16.326Z,1520538556.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:16.358Z,1520538556.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:16.748Z,1520538556.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:16.764Z,1520538556.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:17.153Z,1520538557.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:17.168Z,1520538557.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:17.552Z,1520538557.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:17.568Z,1520538557.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:17.933Z,1520538557.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:17.957Z,1520538557.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:18.333Z,1520538558.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:18.367Z,1520538558.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:18.746Z,1520538558.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:18.762Z,1520538558.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:19.130Z,1520538559.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:19.167Z,1520538559.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:19.555Z,1520538559.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:19.571Z,1520538559.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:19.957Z,1520538559.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:19.975Z,1520538559.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:20.353Z,1520538560.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:20.375Z,1520538560.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:20.735Z,1520538560.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:20.764Z,1520538560.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:21.127Z,1520538561.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:21.159Z,1520538561.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:21.535Z,1520538561.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:21.563Z,1520538561.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:21.933Z,1520538561.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:21.969Z,1520538561.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:22.336Z,1520538562.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:22.371Z,1520538562.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:22.746Z,1520538562.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:22.775Z,1520538562.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:23.153Z,1520538563.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:23.174Z,1520538563.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:23.553Z,1520538563.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:23.573Z,1520538563.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:23.942Z,1520538563.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:23.968Z,1520538563.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:24.336Z,1520538564.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:24.363Z,1520538564.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:24.741Z,1520538564.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:24.776Z,1520538564.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:25.142Z,1520538565.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:25.174Z,1520538565.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:25.519Z,1520538565.519 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T19:49:25.519Z,1520538565.519 [NAL9602] Data Fault, FailCount= 2
2018-03-08T19:49:25.519Z,1520538565.519 [NAL9602](ERROR): Data Fault
2018-03-08T19:49:25.536Z,1520538565.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:25.550Z,1520538565.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:25.588Z,1520538565.588 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T19:49:25.922Z,1520538565.922 [NAL9602](INFO): Powering down
2018-03-08T19:49:25.939Z,1520538565.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:25.955Z,1520538565.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:26.335Z,1520538566.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:26.355Z,1520538566.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:26.730Z,1520538566.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:26.745Z,1520538566.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:26.757Z,1520538566.757 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T19:49:26.758Z,1520538566.758 [NAL9602] No Fault, FailCount= 2
2018-03-08T19:49:27.135Z,1520538567.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:27.150Z,1520538567.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:27.537Z,1520538567.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:27.552Z,1520538567.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:27.935Z,1520538567.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:27.950Z,1520538567.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:28.342Z,1520538568.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:28.357Z,1520538568.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:28.738Z,1520538568.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:28.753Z,1520538568.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:29.138Z,1520538569.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:29.153Z,1520538569.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:29.542Z,1520538569.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:29.557Z,1520538569.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:29.938Z,1520538569.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:29.952Z,1520538569.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:30.341Z,1520538570.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:30.356Z,1520538570.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:30.742Z,1520538570.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:30.757Z,1520538570.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:31.138Z,1520538571.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:31.155Z,1520538571.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:31.535Z,1520538571.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:31.550Z,1520538571.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:31.942Z,1520538571.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:31.957Z,1520538571.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:32.337Z,1520538572.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:32.352Z,1520538572.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:32.723Z,1520538572.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:32.758Z,1520538572.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:33.142Z,1520538573.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:33.157Z,1520538573.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:33.538Z,1520538573.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:33.553Z,1520538573.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:33.936Z,1520538573.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:33.951Z,1520538573.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:34.333Z,1520538574.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:34.358Z,1520538574.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:34.742Z,1520538574.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:34.757Z,1520538574.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:35.142Z,1520538575.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:35.157Z,1520538575.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:35.542Z,1520538575.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:35.557Z,1520538575.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:35.942Z,1520538575.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:35.957Z,1520538575.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:36.338Z,1520538576.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:36.353Z,1520538576.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:36.736Z,1520538576.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:36.751Z,1520538576.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:37.138Z,1520538577.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:37.153Z,1520538577.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:37.536Z,1520538577.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:37.551Z,1520538577.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:37.943Z,1520538577.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:37.958Z,1520538577.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:38.343Z,1520538578.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:38.357Z,1520538578.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:38.735Z,1520538578.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:38.751Z,1520538578.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:39.138Z,1520538579.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:39.153Z,1520538579.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:39.542Z,1520538579.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:39.557Z,1520538579.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:39.941Z,1520538579.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:39.957Z,1520538579.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:40.341Z,1520538580.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:40.357Z,1520538580.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:40.738Z,1520538580.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:40.759Z,1520538580.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:41.141Z,1520538581.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:41.156Z,1520538581.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:41.538Z,1520538581.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:41.554Z,1520538581.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:41.947Z,1520538581.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:41.961Z,1520538581.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:42.337Z,1520538582.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:42.414Z,1520538582.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:42.740Z,1520538582.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:42.763Z,1520538582.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:43.140Z,1520538583.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:43.163Z,1520538583.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:43.540Z,1520538583.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:43.597Z,1520538583.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:43.937Z,1520538583.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:43.953Z,1520538583.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:44.338Z,1520538584.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:44.375Z,1520538584.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:44.740Z,1520538584.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:44.755Z,1520538584.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:45.137Z,1520538585.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:45.158Z,1520538585.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:45.540Z,1520538585.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:45.595Z,1520538585.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:45.937Z,1520538585.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:45.952Z,1520538585.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:46.342Z,1520538586.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:46.358Z,1520538586.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:46.737Z,1520538586.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:46.762Z,1520538586.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:47.138Z,1520538587.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:47.152Z,1520538587.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:47.542Z,1520538587.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:47.557Z,1520538587.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:47.937Z,1520538587.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:47.952Z,1520538587.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:48.336Z,1520538588.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:48.351Z,1520538588.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:48.742Z,1520538588.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:48.757Z,1520538588.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:49.133Z,1520538589.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:49.155Z,1520538589.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:49.535Z,1520538589.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:49.550Z,1520538589.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:49.938Z,1520538589.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:49.953Z,1520538589.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:50.333Z,1520538590.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:50.355Z,1520538590.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:50.734Z,1520538590.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:50.750Z,1520538590.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:51.142Z,1520538591.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:51.158Z,1520538591.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:51.545Z,1520538591.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:51.566Z,1520538591.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:51.934Z,1520538591.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:51.950Z,1520538591.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:52.338Z,1520538592.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:52.353Z,1520538592.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:52.733Z,1520538592.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:52.763Z,1520538592.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:53.142Z,1520538593.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:53.158Z,1520538593.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:53.533Z,1520538593.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:53.556Z,1520538593.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:53.937Z,1520538593.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:53.952Z,1520538593.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:54.337Z,1520538594.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:54.352Z,1520538594.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:54.742Z,1520538594.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:54.757Z,1520538594.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:55.133Z,1520538595.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:55.165Z,1520538595.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:55.530Z,1520538595.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:55.556Z,1520538595.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:55.942Z,1520538595.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:55.962Z,1520538595.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:56.314Z,1520538596.314 [NAL9602](INFO): Powering up NAL9602
2018-03-08T19:49:56.331Z,1520538596.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:56.361Z,1520538596.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:56.730Z,1520538596.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:56.756Z,1520538596.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:57.142Z,1520538597.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:57.163Z,1520538597.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:57.530Z,1520538597.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:57.562Z,1520538597.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:57.931Z,1520538597.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:57.958Z,1520538597.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:58.342Z,1520538598.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:58.357Z,1520538598.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:58.730Z,1520538598.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:58.762Z,1520538598.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:59.130Z,1520538599.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:59.157Z,1520538599.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:59.523Z,1520538599.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:59.562Z,1520538599.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:49:59.931Z,1520538599.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:49:59.967Z,1520538599.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:00.331Z,1520538600.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:00.370Z,1520538600.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:00.728Z,1520538600.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:00.743Z,1520538600.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:01.139Z,1520538601.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:01.175Z,1520538601.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:01.536Z,1520538601.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:01.551Z,1520538601.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:04.632Z,1520538604.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:04.669Z,1520538604.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:04.752Z,1520538604.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:04.777Z,1520538604.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:05.138Z,1520538605.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:05.153Z,1520538605.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:05.531Z,1520538605.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:05.546Z,1520538605.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:05.947Z,1520538605.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:05.983Z,1520538605.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:06.331Z,1520538606.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:06.345Z,1520538606.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:06.730Z,1520538606.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:06.746Z,1520538606.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:07.153Z,1520538607.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:07.177Z,1520538607.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:07.514Z,1520538607.514 [NAL9602](INFO): NAL9602 initialized
2018-03-08T19:50:07.532Z,1520538607.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:07.547Z,1520538607.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:07.935Z,1520538607.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:07.950Z,1520538607.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:08.339Z,1520538608.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:08.363Z,1520538608.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:08.740Z,1520538608.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:08.762Z,1520538608.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:09.140Z,1520538609.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:09.156Z,1520538609.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:09.558Z,1520538609.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:09.588Z,1520538609.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:09.934Z,1520538609.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:09.949Z,1520538609.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:10.339Z,1520538610.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:10.354Z,1520538610.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:10.743Z,1520538610.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:10.762Z,1520538610.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:11.143Z,1520538611.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:11.159Z,1520538611.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:11.542Z,1520538611.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:11.557Z,1520538611.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:11.943Z,1520538611.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:11.966Z,1520538611.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:12.336Z,1520538612.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:12.351Z,1520538612.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:12.720Z,1520538612.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:12.747Z,1520538612.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:13.145Z,1520538613.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:13.160Z,1520538613.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:13.544Z,1520538613.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:13.559Z,1520538613.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:13.945Z,1520538613.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:13.960Z,1520538613.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:14.333Z,1520538614.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:14.348Z,1520538614.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:14.733Z,1520538614.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:14.752Z,1520538614.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:15.145Z,1520538615.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:15.161Z,1520538615.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:15.545Z,1520538615.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:15.561Z,1520538615.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:15.944Z,1520538615.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:15.959Z,1520538615.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:16.336Z,1520538616.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:16.357Z,1520538616.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:16.739Z,1520538616.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:16.758Z,1520538616.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:17.144Z,1520538617.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:17.159Z,1520538617.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:17.545Z,1520538617.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:17.560Z,1520538617.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:17.943Z,1520538617.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:17.966Z,1520538617.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:18.331Z,1520538618.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:18.346Z,1520538618.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:18.740Z,1520538618.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:18.756Z,1520538618.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:19.139Z,1520538619.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:19.154Z,1520538619.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:19.542Z,1520538619.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:19.563Z,1520538619.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:19.941Z,1520538619.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:19.956Z,1520538619.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:20.343Z,1520538620.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:20.358Z,1520538620.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:20.738Z,1520538620.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:20.753Z,1520538620.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:21.141Z,1520538621.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:21.156Z,1520538621.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:21.538Z,1520538621.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:21.558Z,1520538621.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:21.936Z,1520538621.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:21.951Z,1520538621.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:22.339Z,1520538622.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:22.354Z,1520538622.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:22.742Z,1520538622.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:22.763Z,1520538622.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:23.144Z,1520538623.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:23.159Z,1520538623.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:23.540Z,1520538623.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:23.564Z,1520538623.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:23.938Z,1520538623.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:23.959Z,1520538623.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:24.333Z,1520538624.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:24.348Z,1520538624.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:24.741Z,1520538624.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:24.756Z,1520538624.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:25.127Z,1520538625.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:25.158Z,1520538625.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:25.548Z,1520538625.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:25.563Z,1520538625.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:25.949Z,1520538625.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:25.965Z,1520538625.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:26.345Z,1520538626.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:26.360Z,1520538626.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:26.727Z,1520538626.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:26.753Z,1520538626.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:27.130Z,1520538627.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:27.158Z,1520538627.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:27.527Z,1520538627.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:27.553Z,1520538627.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:27.927Z,1520538627.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:27.963Z,1520538627.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:28.330Z,1520538628.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:28.357Z,1520538628.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:28.749Z,1520538628.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:28.765Z,1520538628.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:29.149Z,1520538629.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:29.164Z,1520538629.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:29.545Z,1520538629.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:29.561Z,1520538629.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:29.927Z,1520538629.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:29.954Z,1520538629.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:30.330Z,1520538630.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:30.356Z,1520538630.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:30.733Z,1520538630.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:30.760Z,1520538630.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:31.127Z,1520538631.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:31.154Z,1520538631.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:31.537Z,1520538631.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:31.563Z,1520538631.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:31.937Z,1520538631.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:31.968Z,1520538631.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:32.351Z,1520538632.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:32.366Z,1520538632.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:32.731Z,1520538632.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:32.759Z,1520538632.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:33.134Z,1520538633.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:33.166Z,1520538633.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:33.534Z,1520538633.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:33.570Z,1520538633.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:33.936Z,1520538633.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:33.951Z,1520538633.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:34.334Z,1520538634.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:34.350Z,1520538634.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:34.741Z,1520538634.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:34.769Z,1520538634.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:35.145Z,1520538635.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:35.160Z,1520538635.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:35.534Z,1520538635.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:35.551Z,1520538635.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:35.932Z,1520538635.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:35.951Z,1520538635.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:36.336Z,1520538636.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:36.358Z,1520538636.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:36.734Z,1520538636.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:36.749Z,1520538636.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:37.133Z,1520538637.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:37.149Z,1520538637.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:37.538Z,1520538637.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:37.553Z,1520538637.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:37.937Z,1520538637.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:37.953Z,1520538637.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:38.337Z,1520538638.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:38.353Z,1520538638.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:38.736Z,1520538638.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:38.751Z,1520538638.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:39.137Z,1520538639.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:39.152Z,1520538639.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:39.537Z,1520538639.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:39.552Z,1520538639.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:39.937Z,1520538639.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:39.952Z,1520538639.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:40.336Z,1520538640.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:40.351Z,1520538640.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:40.738Z,1520538640.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:40.754Z,1520538640.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:41.142Z,1520538641.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:41.156Z,1520538641.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:41.538Z,1520538641.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:41.554Z,1520538641.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:41.934Z,1520538641.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:41.954Z,1520538641.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:42.336Z,1520538642.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:42.352Z,1520538642.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:42.732Z,1520538642.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:42.749Z,1520538642.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:43.136Z,1520538643.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:43.152Z,1520538643.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:43.556Z,1520538643.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:43.587Z,1520538643.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:43.940Z,1520538643.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:43.955Z,1520538643.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:44.339Z,1520538644.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:44.355Z,1520538644.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:44.737Z,1520538644.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:44.752Z,1520538644.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:45.139Z,1520538645.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:45.154Z,1520538645.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:45.534Z,1520538645.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:45.554Z,1520538645.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:45.939Z,1520538645.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:45.954Z,1520538645.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:46.339Z,1520538646.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:46.354Z,1520538646.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:46.741Z,1520538646.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:46.757Z,1520538646.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:47.144Z,1520538647.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:47.159Z,1520538647.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:47.540Z,1520538647.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:47.556Z,1520538647.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:47.939Z,1520538647.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:47.954Z,1520538647.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:48.338Z,1520538648.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:48.353Z,1520538648.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:48.740Z,1520538648.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:48.755Z,1520538648.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:49.138Z,1520538649.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:49.154Z,1520538649.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:49.540Z,1520538649.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:49.555Z,1520538649.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:49.941Z,1520538649.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:49.956Z,1520538649.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:50.339Z,1520538650.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:50.371Z,1520538650.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:50.738Z,1520538650.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:50.758Z,1520538650.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:51.138Z,1520538651.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:51.154Z,1520538651.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:51.529Z,1520538651.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:51.552Z,1520538651.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:51.923Z,1520538651.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:51.960Z,1520538651.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:52.324Z,1520538652.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:52.355Z,1520538652.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:52.749Z,1520538652.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:52.764Z,1520538652.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:53.148Z,1520538653.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:53.170Z,1520538653.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:53.541Z,1520538653.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:53.557Z,1520538653.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:53.942Z,1520538653.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:53.958Z,1520538653.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:54.327Z,1520538654.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:54.353Z,1520538654.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:54.742Z,1520538654.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:54.757Z,1520538654.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:55.127Z,1520538655.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:55.159Z,1520538655.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:55.546Z,1520538655.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:55.566Z,1520538655.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:55.941Z,1520538655.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:55.956Z,1520538655.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:56.337Z,1520538656.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:56.360Z,1520538656.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:56.740Z,1520538656.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:56.755Z,1520538656.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:57.139Z,1520538657.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:57.155Z,1520538657.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:57.526Z,1520538657.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:57.559Z,1520538657.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:57.939Z,1520538657.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:57.962Z,1520538657.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:58.322Z,1520538658.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:58.351Z,1520538658.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:58.750Z,1520538658.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:58.770Z,1520538658.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:59.153Z,1520538659.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:59.169Z,1520538659.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:59.542Z,1520538659.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:59.558Z,1520538659.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:50:59.926Z,1520538659.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:50:59.958Z,1520538659.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:00.326Z,1520538660.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:00.353Z,1520538660.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:00.732Z,1520538660.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:00.759Z,1520538660.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:01.126Z,1520538661.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:01.152Z,1520538661.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:01.544Z,1520538661.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:01.572Z,1520538661.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:01.945Z,1520538661.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:01.961Z,1520538661.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:05.042Z,1520538665.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:05.064Z,1520538665.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:05.156Z,1520538665.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:05.171Z,1520538665.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:05.518Z,1520538665.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:05.554Z,1520538665.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:05.915Z,1520538665.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:05.930Z,1520538665.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:06.314Z,1520538666.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:06.352Z,1520538666.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:06.725Z,1520538666.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:06.751Z,1520538666.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:07.125Z,1520538667.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:07.152Z,1520538667.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:07.525Z,1520538667.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:07.560Z,1520538667.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:07.914Z,1520538667.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:07.931Z,1520538667.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:08.314Z,1520538668.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:08.329Z,1520538668.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:08.720Z,1520538668.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:08.735Z,1520538668.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:09.118Z,1520538669.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:09.138Z,1520538669.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:09.533Z,1520538669.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:09.565Z,1520538669.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:09.929Z,1520538669.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:09.961Z,1520538669.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:10.333Z,1520538670.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:10.367Z,1520538670.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:10.719Z,1520538670.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:10.734Z,1520538670.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:11.117Z,1520538671.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:11.137Z,1520538671.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:11.516Z,1520538671.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:11.539Z,1520538671.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:11.921Z,1520538671.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:11.936Z,1520538671.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:12.319Z,1520538672.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:12.335Z,1520538672.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:12.721Z,1520538672.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:12.737Z,1520538672.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:13.126Z,1520538673.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:13.141Z,1520538673.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:13.525Z,1520538673.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:13.541Z,1520538673.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:13.920Z,1520538673.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:13.942Z,1520538673.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:14.320Z,1520538674.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:14.335Z,1520538674.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:14.721Z,1520538674.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:14.737Z,1520538674.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:15.116Z,1520538675.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:15.140Z,1520538675.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:15.526Z,1520538675.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:15.541Z,1520538675.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:15.926Z,1520538675.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:15.946Z,1520538675.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:16.325Z,1520538676.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:16.341Z,1520538676.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:16.721Z,1520538676.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:16.736Z,1520538676.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:17.115Z,1520538677.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:17.131Z,1520538677.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:17.519Z,1520538677.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:17.534Z,1520538677.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:17.923Z,1520538677.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:17.939Z,1520538677.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:18.315Z,1520538678.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:18.335Z,1520538678.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:18.726Z,1520538678.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:18.742Z,1520538678.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:19.126Z,1520538679.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:19.141Z,1520538679.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:19.524Z,1520538679.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:19.539Z,1520538679.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:19.922Z,1520538679.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:19.938Z,1520538679.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:20.322Z,1520538680.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:20.338Z,1520538680.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:20.723Z,1520538680.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:20.739Z,1520538680.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:21.118Z,1520538681.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:21.139Z,1520538681.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:21.529Z,1520538681.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:21.545Z,1520538681.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:21.924Z,1520538681.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:21.940Z,1520538681.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:22.328Z,1520538682.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:22.351Z,1520538682.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:22.723Z,1520538682.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:22.739Z,1520538682.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:23.122Z,1520538683.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:23.142Z,1520538683.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:23.522Z,1520538683.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:23.542Z,1520538683.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:23.920Z,1520538683.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:23.935Z,1520538683.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:24.313Z,1520538684.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:24.329Z,1520538684.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:24.728Z,1520538684.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:24.743Z,1520538684.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:25.128Z,1520538685.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:25.143Z,1520538685.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:25.526Z,1520538685.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:25.549Z,1520538685.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:25.922Z,1520538685.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:25.942Z,1520538685.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:26.305Z,1520538686.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:26.333Z,1520538686.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:26.723Z,1520538686.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:26.746Z,1520538686.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:27.122Z,1520538687.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:27.142Z,1520538687.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:27.530Z,1520538687.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:27.545Z,1520538687.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:27.929Z,1520538687.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:27.944Z,1520538687.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:28.332Z,1520538688.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:28.354Z,1520538688.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:28.722Z,1520538688.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:28.738Z,1520538688.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:29.122Z,1520538689.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:29.142Z,1520538689.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:29.513Z,1520538689.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:29.537Z,1520538689.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:29.907Z,1520538689.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:29.940Z,1520538689.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:30.324Z,1520538690.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:30.346Z,1520538690.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:30.732Z,1520538690.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:30.755Z,1520538690.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:31.130Z,1520538691.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:31.145Z,1520538691.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:31.529Z,1520538691.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:31.544Z,1520538691.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:31.917Z,1520538691.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:31.937Z,1520538691.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:32.320Z,1520538692.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:32.336Z,1520538692.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:32.725Z,1520538692.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:32.740Z,1520538692.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:33.113Z,1520538693.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:33.138Z,1520538693.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:33.530Z,1520538693.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:33.545Z,1520538693.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:33.929Z,1520538693.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:33.944Z,1520538693.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:34.333Z,1520538694.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:34.354Z,1520538694.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:34.723Z,1520538694.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:34.738Z,1520538694.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:35.120Z,1520538695.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:35.136Z,1520538695.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:35.513Z,1520538695.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:35.537Z,1520538695.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:35.920Z,1520538695.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:35.943Z,1520538695.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:36.322Z,1520538696.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:36.343Z,1520538696.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:36.728Z,1520538696.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:36.744Z,1520538696.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:37.133Z,1520538697.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:37.148Z,1520538697.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:37.528Z,1520538697.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:37.544Z,1520538697.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:37.913Z,1520538697.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:37.942Z,1520538697.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:38.318Z,1520538698.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:38.334Z,1520538698.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:38.724Z,1520538698.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:38.746Z,1520538698.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:39.110Z,1520538699.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:39.143Z,1520538699.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:39.529Z,1520538699.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:39.550Z,1520538699.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:39.936Z,1520538699.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:39.959Z,1520538699.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:40.332Z,1520538700.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:40.347Z,1520538700.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:40.722Z,1520538700.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:40.738Z,1520538700.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:41.146Z,1520538701.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:41.183Z,1520538701.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:41.533Z,1520538701.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:41.568Z,1520538701.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:41.918Z,1520538701.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:41.953Z,1520538701.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:42.310Z,1520538702.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:42.342Z,1520538702.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:42.747Z,1520538702.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:42.771Z,1520538702.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:43.127Z,1520538703.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:43.160Z,1520538703.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:43.525Z,1520538703.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:43.547Z,1520538703.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:43.919Z,1520538703.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:43.949Z,1520538703.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:44.315Z,1520538704.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:44.370Z,1520538704.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:44.717Z,1520538704.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:44.749Z,1520538704.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:45.133Z,1520538705.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:45.171Z,1520538705.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:45.533Z,1520538705.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:45.558Z,1520538705.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:45.921Z,1520538705.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:45.949Z,1520538705.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:46.333Z,1520538706.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:46.357Z,1520538706.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:46.716Z,1520538706.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:46.731Z,1520538706.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:47.111Z,1520538707.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:47.130Z,1520538707.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:47.511Z,1520538707.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:47.539Z,1520538707.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:47.911Z,1520538707.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:47.927Z,1520538707.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:48.311Z,1520538708.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:48.342Z,1520538708.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:48.722Z,1520538708.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:48.743Z,1520538708.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:49.125Z,1520538709.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:49.140Z,1520538709.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:49.529Z,1520538709.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:49.561Z,1520538709.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:49.919Z,1520538709.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:49.935Z,1520538709.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:50.325Z,1520538710.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:50.367Z,1520538710.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:50.717Z,1520538710.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:50.732Z,1520538710.732 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:50.732Z,1520538710.732 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 242
2018-03-08T19:51:50.732Z,1520538710.732 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T19:51:50.734Z,1520538710.734 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:50.734Z,1520538710.734 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 242
2018-03-08T19:51:50.734Z,1520538710.734 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T19:51:50.736Z,1520538710.736 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:50.736Z,1520538710.736 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 242
2018-03-08T19:51:50.736Z,1520538710.736 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T19:51:50.769Z,1520538710.769 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T19:51:50.769Z,1520538710.769 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T19:51:50.769Z,1520538710.769 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T19:51:51.114Z,1520538711.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:51.156Z,1520538711.156 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T19:51:51.156Z,1520538711.156 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 242
2018-03-08T19:51:51.160Z,1520538711.160 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T19:51:51.161Z,1520538711.161 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 242
2018-03-08T19:51:51.161Z,1520538711.161 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T19:51:51.161Z,1520538711.161 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 242
2018-03-08T19:51:51.525Z,1520538711.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:51.539Z,1520538711.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T19:51:51.539Z,1520538711.539 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:51:51.540Z,1520538711.540 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:51:51.540Z,1520538711.540 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T19:51:51.541Z,1520538711.541 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:51:51.541Z,1520538711.541 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:51:51.541Z,1520538711.541 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T19:51:51.542Z,1520538711.542 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:51:51.542Z,1520538711.542 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:51:51.929Z,1520538711.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:51.944Z,1520538711.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T19:51:51.945Z,1520538711.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:52.328Z,1520538712.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:52.343Z,1520538712.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T19:51:52.344Z,1520538712.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:52.719Z,1520538712.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:52.734Z,1520538712.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T19:51:52.735Z,1520538712.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:53.123Z,1520538713.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:53.138Z,1520538713.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T19:51:53.139Z,1520538713.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:53.519Z,1520538713.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:53.534Z,1520538713.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T19:51:53.535Z,1520538713.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:53.924Z,1520538713.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:53.939Z,1520538713.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T19:51:53.940Z,1520538713.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:54.321Z,1520538714.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:54.336Z,1520538714.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T19:51:54.337Z,1520538714.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:54.729Z,1520538714.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:54.744Z,1520538714.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T19:51:54.745Z,1520538714.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:55.129Z,1520538715.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:55.143Z,1520538715.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T19:51:55.144Z,1520538715.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:55.527Z,1520538715.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:55.565Z,1520538715.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T19:51:55.566Z,1520538715.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:55.922Z,1520538715.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:55.942Z,1520538715.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T19:51:55.943Z,1520538715.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:56.324Z,1520538716.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:56.338Z,1520538716.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T19:51:56.339Z,1520538716.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:56.724Z,1520538716.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:56.739Z,1520538716.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T19:51:56.740Z,1520538716.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:57.118Z,1520538717.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:57.133Z,1520538717.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T19:51:57.134Z,1520538717.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:57.528Z,1520538717.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:57.544Z,1520538717.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T19:51:57.545Z,1520538717.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:57.926Z,1520538717.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:57.949Z,1520538717.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T19:51:57.950Z,1520538717.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:58.332Z,1520538718.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:58.354Z,1520538718.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T19:51:58.355Z,1520538718.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:58.722Z,1520538718.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:58.737Z,1520538718.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T19:51:58.738Z,1520538718.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:58.751Z,1520538718.751 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T19:51:59.122Z,1520538719.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:59.137Z,1520538719.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T19:51:59.138Z,1520538719.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:59.513Z,1520538719.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:59.535Z,1520538719.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T19:51:59.537Z,1520538719.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:51:59.920Z,1520538719.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:51:59.935Z,1520538719.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T19:51:59.936Z,1520538719.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:00.322Z,1520538720.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:00.342Z,1520538720.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T19:52:00.343Z,1520538720.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:00.728Z,1520538720.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:00.743Z,1520538720.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T19:52:00.744Z,1520538720.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:01.132Z,1520538721.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:01.147Z,1520538721.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T19:52:01.148Z,1520538721.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:01.528Z,1520538721.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:01.543Z,1520538721.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T19:52:01.544Z,1520538721.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:01.917Z,1520538721.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:01.937Z,1520538721.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T19:52:01.938Z,1520538721.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:02.319Z,1520538722.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:02.343Z,1520538722.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T19:52:02.343Z,1520538722.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:05.648Z,1520538725.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:05.679Z,1520538725.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T19:52:05.680Z,1520538725.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:05.781Z,1520538725.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:05.822Z,1520538725.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2018-03-08T19:52:05.823Z,1520538725.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:06.153Z,1520538726.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:06.198Z,1520538726.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-03-08T19:52:06.199Z,1520538726.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:06.532Z,1520538726.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:06.548Z,1520538726.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-03-08T19:52:06.549Z,1520538726.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:06.950Z,1520538726.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:06.978Z,1520538726.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-03-08T19:52:06.979Z,1520538726.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:07.335Z,1520538727.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:07.358Z,1520538727.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-03-08T19:52:07.359Z,1520538727.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:07.740Z,1520538727.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:07.755Z,1520538727.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-03-08T19:52:07.756Z,1520538727.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:08.195Z,1520538728.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:08.306Z,1520538728.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T19:52:08.307Z,1520538728.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:08.542Z,1520538728.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:08.581Z,1520538728.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-03-08T19:52:08.582Z,1520538728.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:08.941Z,1520538728.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:08.956Z,1520538728.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-03-08T19:52:08.957Z,1520538728.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:09.339Z,1520538729.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:09.358Z,1520538729.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-03-08T19:52:09.359Z,1520538729.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:09.737Z,1520538729.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:09.752Z,1520538729.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-03-08T19:52:09.753Z,1520538729.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:10.140Z,1520538730.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:10.156Z,1520538730.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-03-08T19:52:10.157Z,1520538730.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:10.539Z,1520538730.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:10.554Z,1520538730.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-03-08T19:52:10.555Z,1520538730.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:10.946Z,1520538730.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:10.961Z,1520538730.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:11.342Z,1520538731.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:11.357Z,1520538731.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:11.741Z,1520538731.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:11.756Z,1520538731.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:12.130Z,1520538732.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:12.146Z,1520538732.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:12.534Z,1520538732.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:12.549Z,1520538732.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:12.934Z,1520538732.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:12.958Z,1520538732.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:13.339Z,1520538733.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:13.354Z,1520538733.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:13.749Z,1520538733.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:13.764Z,1520538733.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:14.148Z,1520538734.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:14.170Z,1520538734.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:14.548Z,1520538734.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:14.563Z,1520538734.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:14.933Z,1520538734.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:14.955Z,1520538734.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:15.331Z,1520538735.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:15.355Z,1520538735.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:15.740Z,1520538735.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:15.755Z,1520538735.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:16.143Z,1520538736.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:16.159Z,1520538736.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:16.526Z,1520538736.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:16.555Z,1520538736.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:16.946Z,1520538736.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:16.961Z,1520538736.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:17.347Z,1520538737.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:17.362Z,1520538737.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:17.742Z,1520538737.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:17.773Z,1520538737.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:18.130Z,1520538738.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:18.158Z,1520538738.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:18.524Z,1520538738.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:18.556Z,1520538738.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:18.931Z,1520538738.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:18.967Z,1520538738.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:19.322Z,1520538739.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:19.361Z,1520538739.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:19.733Z,1520538739.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:19.772Z,1520538739.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:20.154Z,1520538740.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:20.169Z,1520538740.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:20.549Z,1520538740.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:20.570Z,1520538740.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:20.924Z,1520538740.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:20.948Z,1520538740.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:21.330Z,1520538741.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:21.363Z,1520538741.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:21.726Z,1520538741.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:21.764Z,1520538741.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:22.125Z,1520538742.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:22.161Z,1520538742.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:22.531Z,1520538742.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:22.563Z,1520538742.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:22.941Z,1520538742.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:22.970Z,1520538742.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:23.333Z,1520538743.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:23.348Z,1520538743.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:23.746Z,1520538743.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:23.770Z,1520538743.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:24.135Z,1520538744.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:24.149Z,1520538744.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:24.523Z,1520538744.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:24.540Z,1520538744.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:24.935Z,1520538744.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:24.971Z,1520538744.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:25.327Z,1520538745.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:25.350Z,1520538745.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:25.734Z,1520538745.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:25.749Z,1520538745.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:26.146Z,1520538746.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:26.177Z,1520538746.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:26.550Z,1520538746.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:26.575Z,1520538746.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:26.928Z,1520538746.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:26.944Z,1520538746.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:27.335Z,1520538747.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:27.354Z,1520538747.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:27.731Z,1520538747.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:27.754Z,1520538747.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:28.137Z,1520538748.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:28.153Z,1520538748.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:28.537Z,1520538748.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:28.552Z,1520538748.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:28.949Z,1520538748.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:28.980Z,1520538748.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:29.338Z,1520538749.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:29.353Z,1520538749.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:29.742Z,1520538749.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:29.757Z,1520538749.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:30.137Z,1520538750.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:30.152Z,1520538750.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:30.534Z,1520538750.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:30.549Z,1520538750.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:30.935Z,1520538750.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:30.954Z,1520538750.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:31.334Z,1520538751.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:31.350Z,1520538751.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:31.738Z,1520538751.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:31.754Z,1520538751.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:32.150Z,1520538752.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:32.179Z,1520538752.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:32.538Z,1520538752.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:32.553Z,1520538752.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:32.933Z,1520538752.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:32.949Z,1520538752.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:33.335Z,1520538753.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:33.351Z,1520538753.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:33.736Z,1520538753.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:33.751Z,1520538753.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:34.137Z,1520538754.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:34.152Z,1520538754.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:34.536Z,1520538754.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:34.551Z,1520538754.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:34.938Z,1520538754.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:34.953Z,1520538754.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:35.337Z,1520538755.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:35.353Z,1520538755.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:35.750Z,1520538755.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:35.779Z,1520538755.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:36.132Z,1520538756.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:36.149Z,1520538756.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:36.522Z,1520538756.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:36.550Z,1520538756.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:36.931Z,1520538756.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:36.964Z,1520538756.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:37.329Z,1520538757.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:37.363Z,1520538757.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:37.746Z,1520538757.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:37.762Z,1520538757.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:38.149Z,1520538758.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:38.171Z,1520538758.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:38.546Z,1520538758.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:38.561Z,1520538758.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:38.925Z,1520538758.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:38.956Z,1520538758.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:39.330Z,1520538759.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:39.357Z,1520538759.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:39.726Z,1520538759.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:39.755Z,1520538759.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:40.123Z,1520538760.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:40.158Z,1520538760.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:40.530Z,1520538760.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:40.562Z,1520538760.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:40.947Z,1520538760.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:40.963Z,1520538760.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:41.346Z,1520538761.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:41.362Z,1520538761.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:41.741Z,1520538761.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:41.764Z,1520538761.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:42.126Z,1520538762.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:42.159Z,1520538762.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:42.526Z,1520538762.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:42.558Z,1520538762.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:42.931Z,1520538762.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:42.967Z,1520538762.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:43.328Z,1520538763.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:43.344Z,1520538763.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:43.741Z,1520538763.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:43.769Z,1520538763.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:44.142Z,1520538764.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:44.168Z,1520538764.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:44.546Z,1520538764.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:44.575Z,1520538764.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:44.926Z,1520538764.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:44.942Z,1520538764.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:45.335Z,1520538765.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:45.371Z,1520538765.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:45.736Z,1520538765.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:45.751Z,1520538765.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:46.132Z,1520538766.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:46.148Z,1520538766.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:46.531Z,1520538766.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:46.559Z,1520538766.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:46.950Z,1520538766.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:46.984Z,1520538766.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:47.349Z,1520538767.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:47.381Z,1520538767.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:47.743Z,1520538767.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:47.758Z,1520538767.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:48.139Z,1520538768.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:48.154Z,1520538768.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:48.537Z,1520538768.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:48.552Z,1520538768.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:48.940Z,1520538768.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:48.955Z,1520538768.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:49.335Z,1520538769.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:49.354Z,1520538769.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:49.742Z,1520538769.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:49.757Z,1520538769.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:50.146Z,1520538770.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:50.161Z,1520538770.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:50.545Z,1520538770.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:50.561Z,1520538770.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:50.941Z,1520538770.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:50.956Z,1520538770.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:51.337Z,1520538771.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:51.352Z,1520538771.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:51.739Z,1520538771.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:51.755Z,1520538771.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:52.131Z,1520538772.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:52.148Z,1520538772.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:52.529Z,1520538772.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:52.559Z,1520538772.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:52.949Z,1520538772.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:52.965Z,1520538772.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:53.349Z,1520538773.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:53.364Z,1520538773.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:53.745Z,1520538773.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:53.766Z,1520538773.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:54.139Z,1520538774.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:54.154Z,1520538774.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:54.522Z,1520538774.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:54.560Z,1520538774.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:54.940Z,1520538774.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:54.955Z,1520538774.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:55.323Z,1520538775.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:55.350Z,1520538775.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:55.749Z,1520538775.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:55.765Z,1520538775.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:56.148Z,1520538776.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:56.163Z,1520538776.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:56.540Z,1520538776.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:56.556Z,1520538776.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:56.922Z,1520538776.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:56.959Z,1520538776.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:57.338Z,1520538777.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:57.357Z,1520538777.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:57.722Z,1520538777.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:57.754Z,1520538777.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:58.141Z,1520538778.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:58.156Z,1520538778.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:58.526Z,1520538778.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:58.553Z,1520538778.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:58.941Z,1520538778.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:58.957Z,1520538778.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:59.354Z,1520538779.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:59.369Z,1520538779.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:52:59.749Z,1520538779.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:52:59.764Z,1520538779.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:00.140Z,1520538780.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:00.155Z,1520538780.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:00.540Z,1520538780.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:00.556Z,1520538780.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:00.927Z,1520538780.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:00.954Z,1520538780.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:00.957Z,1520538780.957 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T19:53:00.958Z,1520538780.958 [Default:CheckIn:C.Wait] Stopped
2018-03-08T19:53:00.958Z,1520538780.958 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T19:53:00.958Z,1520538780.958 [Default:CheckIn:D] Running Loop=1
2018-03-08T19:53:01.322Z,1520538781.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:01.357Z,1520538781.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:01.360Z,1520538781.360 [Default:CheckIn:D] Stopped
2018-03-08T19:53:01.360Z,1520538781.360 [Default:CheckIn:E] Running Loop=1
2018-03-08T19:53:01.750Z,1520538781.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:01.771Z,1520538781.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:01.774Z,1520538781.774 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 727.275911 min 
2018-03-08T19:53:01.774Z,1520538781.774 [Default:CheckIn:E] Stopped
2018-03-08T19:53:01.774Z,1520538781.774 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T19:53:01.774Z,1520538781.774 [Default:CheckIn] Stopped
2018-03-08T19:53:01.775Z,1520538781.775 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T19:53:01.775Z,1520538781.775 [Default:CheckIn](INFO): Running loop #71
2018-03-08T19:53:01.775Z,1520538781.775 [Default:CheckIn] Running Loop=71
2018-03-08T19:53:01.775Z,1520538781.775 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T19:53:01.775Z,1520538781.775 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T19:53:02.151Z,1520538782.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:02.166Z,1520538782.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:02.549Z,1520538782.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:02.564Z,1520538782.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:05.635Z,1520538785.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:05.650Z,1520538785.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:05.751Z,1520538785.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:05.795Z,1520538785.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:06.121Z,1520538786.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:06.146Z,1520538786.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:06.525Z,1520538786.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:06.558Z,1520538786.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:06.917Z,1520538786.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:06.951Z,1520538786.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:07.308Z,1520538787.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:07.323Z,1520538787.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:07.709Z,1520538787.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:07.724Z,1520538787.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:08.108Z,1520538788.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:08.123Z,1520538788.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:08.518Z,1520538788.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:08.539Z,1520538788.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:08.914Z,1520538788.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:08.935Z,1520538788.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:09.314Z,1520538789.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:09.345Z,1520538789.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:09.717Z,1520538789.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:09.732Z,1520538789.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:10.098Z,1520538790.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:10.130Z,1520538790.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:10.496Z,1520538790.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:10.535Z,1520538790.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:10.921Z,1520538790.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:10.939Z,1520538790.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:11.326Z,1520538791.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:11.346Z,1520538791.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:11.705Z,1520538791.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:11.744Z,1520538791.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:12.102Z,1520538792.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:12.128Z,1520538792.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:12.506Z,1520538792.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:12.539Z,1520538792.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:12.897Z,1520538792.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:12.920Z,1520538792.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:13.302Z,1520538793.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:13.334Z,1520538793.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:13.726Z,1520538793.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:13.743Z,1520538793.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:14.121Z,1520538794.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:14.139Z,1520538794.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:14.521Z,1520538794.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:14.541Z,1520538794.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:14.900Z,1520538794.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:14.950Z,1520538794.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:15.298Z,1520538795.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:15.334Z,1520538795.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:15.698Z,1520538795.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:15.734Z,1520538795.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:16.107Z,1520538796.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:16.136Z,1520538796.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:16.498Z,1520538796.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:16.539Z,1520538796.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:16.923Z,1520538796.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:16.939Z,1520538796.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:17.328Z,1520538797.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:17.343Z,1520538797.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:17.721Z,1520538797.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:17.737Z,1520538797.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:18.110Z,1520538798.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:18.139Z,1520538798.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:18.510Z,1520538798.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:18.537Z,1520538798.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:18.904Z,1520538798.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:18.927Z,1520538798.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:19.303Z,1520538799.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:19.318Z,1520538799.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:19.713Z,1520538799.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:19.749Z,1520538799.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:20.117Z,1520538800.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:20.150Z,1520538800.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:20.521Z,1520538800.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:20.546Z,1520538800.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:20.901Z,1520538800.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:20.947Z,1520538800.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:21.302Z,1520538801.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:21.323Z,1520538801.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:21.700Z,1520538801.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:21.760Z,1520538801.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:22.101Z,1520538802.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:22.117Z,1520538802.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:22.498Z,1520538802.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:22.518Z,1520538802.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:22.909Z,1520538802.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:22.924Z,1520538802.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:23.313Z,1520538803.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:23.328Z,1520538803.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:23.726Z,1520538803.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:23.771Z,1520538803.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:24.100Z,1520538804.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:24.122Z,1520538804.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:24.500Z,1520538804.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:24.515Z,1520538804.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:24.897Z,1520538804.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:24.913Z,1520538804.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:25.301Z,1520538805.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:25.316Z,1520538805.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:25.710Z,1520538805.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:25.734Z,1520538805.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:26.114Z,1520538806.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:26.139Z,1520538806.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:26.521Z,1520538806.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:26.537Z,1520538806.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:26.913Z,1520538806.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:26.928Z,1520538806.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:27.295Z,1520538807.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:27.321Z,1520538807.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:27.706Z,1520538807.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:27.726Z,1520538807.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:28.112Z,1520538808.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:28.129Z,1520538808.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:28.495Z,1520538808.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:28.529Z,1520538808.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:28.921Z,1520538808.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:28.937Z,1520538808.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:29.320Z,1520538809.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:29.337Z,1520538809.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:29.721Z,1520538809.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:29.739Z,1520538809.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:30.110Z,1520538810.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:30.131Z,1520538810.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:30.494Z,1520538810.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:30.526Z,1520538810.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:30.896Z,1520538810.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:30.925Z,1520538810.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:31.310Z,1520538811.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:31.327Z,1520538811.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:31.779Z,1520538811.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:31.795Z,1520538811.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:32.123Z,1520538812.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:32.139Z,1520538812.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:32.517Z,1520538812.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:32.539Z,1520538812.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:32.913Z,1520538812.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:32.928Z,1520538812.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:33.311Z,1520538813.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:33.326Z,1520538813.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:33.698Z,1520538813.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:33.730Z,1520538813.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:34.111Z,1520538814.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:34.126Z,1520538814.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:34.510Z,1520538814.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:34.525Z,1520538814.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:34.917Z,1520538814.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:34.934Z,1520538814.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:35.324Z,1520538815.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:35.339Z,1520538815.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:35.712Z,1520538815.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:35.731Z,1520538815.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:36.111Z,1520538816.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:36.126Z,1520538816.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:36.494Z,1520538816.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:36.521Z,1520538816.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:36.911Z,1520538816.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:36.926Z,1520538816.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:37.318Z,1520538817.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:37.334Z,1520538817.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:37.709Z,1520538817.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:37.737Z,1520538817.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:38.126Z,1520538818.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:38.141Z,1520538818.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:38.513Z,1520538818.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:38.548Z,1520538818.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:38.902Z,1520538818.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:38.943Z,1520538818.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:39.303Z,1520538819.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:39.338Z,1520538819.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:39.702Z,1520538819.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:39.740Z,1520538819.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:40.099Z,1520538820.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:40.114Z,1520538820.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:40.498Z,1520538820.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:40.515Z,1520538820.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:40.913Z,1520538820.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:40.945Z,1520538820.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:41.321Z,1520538821.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:41.347Z,1520538821.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:41.717Z,1520538821.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:41.742Z,1520538821.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:42.104Z,1520538822.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:42.119Z,1520538822.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:42.522Z,1520538822.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:42.558Z,1520538822.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:42.908Z,1520538822.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:42.943Z,1520538822.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:43.300Z,1520538823.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:43.352Z,1520538823.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:43.715Z,1520538823.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:43.763Z,1520538823.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:44.115Z,1520538824.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:44.151Z,1520538824.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:44.544Z,1520538824.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:44.559Z,1520538824.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:44.907Z,1520538824.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:44.929Z,1520538824.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:45.306Z,1520538825.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:45.326Z,1520538825.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:45.719Z,1520538825.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:45.739Z,1520538825.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:46.109Z,1520538826.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:46.161Z,1520538826.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:46.510Z,1520538826.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:46.526Z,1520538826.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:46.916Z,1520538826.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:46.931Z,1520538826.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:47.321Z,1520538827.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:47.337Z,1520538827.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:47.716Z,1520538827.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:47.731Z,1520538827.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:48.110Z,1520538828.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:48.130Z,1520538828.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:48.508Z,1520538828.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:48.523Z,1520538828.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:48.912Z,1520538828.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:48.927Z,1520538828.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:49.304Z,1520538829.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:49.325Z,1520538829.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:49.716Z,1520538829.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:49.731Z,1520538829.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:50.117Z,1520538830.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:50.139Z,1520538830.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:50.516Z,1520538830.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:50.531Z,1520538830.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:50.901Z,1520538830.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:50.927Z,1520538830.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:51.306Z,1520538831.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:51.322Z,1520538831.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:51.704Z,1520538831.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:51.727Z,1520538831.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:52.112Z,1520538832.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:52.127Z,1520538832.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:52.510Z,1520538832.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:52.530Z,1520538832.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:52.915Z,1520538832.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:52.931Z,1520538832.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:53.317Z,1520538833.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:53.332Z,1520538833.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:53.716Z,1520538833.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:53.731Z,1520538833.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:54.111Z,1520538834.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:54.126Z,1520538834.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:54.498Z,1520538834.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:54.543Z,1520538834.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:54.903Z,1520538834.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:54.935Z,1520538834.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:55.302Z,1520538835.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:55.342Z,1520538835.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:55.717Z,1520538835.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:55.743Z,1520538835.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:56.136Z,1520538836.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:56.151Z,1520538836.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:56.517Z,1520538836.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:56.540Z,1520538836.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:56.906Z,1520538836.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:56.921Z,1520538836.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:57.306Z,1520538837.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:57.342Z,1520538837.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:57.715Z,1520538837.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:57.790Z,1520538837.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:58.107Z,1520538838.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:58.122Z,1520538838.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:58.504Z,1520538838.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:58.520Z,1520538838.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:58.925Z,1520538838.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:58.950Z,1520538838.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:59.309Z,1520538839.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:59.324Z,1520538839.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:53:59.725Z,1520538839.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:53:59.750Z,1520538839.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:00.105Z,1520538840.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:00.121Z,1520538840.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:00.507Z,1520538840.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:00.522Z,1520538840.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:00.906Z,1520538840.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:00.921Z,1520538840.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:01.316Z,1520538841.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:01.331Z,1520538841.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:01.718Z,1520538841.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:01.733Z,1520538841.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:02.118Z,1520538842.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:02.133Z,1520538842.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:02.516Z,1520538842.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:02.539Z,1520538842.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:02.912Z,1520538842.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:02.928Z,1520538842.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:06.010Z,1520538846.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:06.026Z,1520538846.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:06.123Z,1520538846.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:06.166Z,1520538846.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:06.499Z,1520538846.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:06.515Z,1520538846.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:06.898Z,1520538846.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:06.914Z,1520538846.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:07.301Z,1520538847.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:07.323Z,1520538847.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:07.681Z,1520538847.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:07.713Z,1520538847.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:08.079Z,1520538848.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:08.114Z,1520538848.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:08.480Z,1520538848.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:08.504Z,1520538848.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:08.879Z,1520538848.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:08.894Z,1520538848.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:09.282Z,1520538849.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:09.297Z,1520538849.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:09.693Z,1520538849.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:09.716Z,1520538849.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:10.093Z,1520538850.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:10.116Z,1520538850.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:10.494Z,1520538850.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:10.517Z,1520538850.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:10.875Z,1520538850.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:10.891Z,1520538850.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:11.282Z,1520538851.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:11.318Z,1520538851.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:11.683Z,1520538851.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:11.698Z,1520538851.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:12.079Z,1520538852.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:12.095Z,1520538852.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:12.489Z,1520538852.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:12.521Z,1520538852.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:12.897Z,1520538852.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:12.921Z,1520538852.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:13.293Z,1520538853.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:13.323Z,1520538853.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:13.679Z,1520538853.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:13.699Z,1520538853.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:14.083Z,1520538854.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:14.098Z,1520538854.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:14.479Z,1520538854.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:14.495Z,1520538854.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:14.884Z,1520538854.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:14.899Z,1520538854.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:15.284Z,1520538855.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:15.299Z,1520538855.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:15.693Z,1520538855.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:15.724Z,1520538855.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:16.093Z,1520538856.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:16.120Z,1520538856.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:16.492Z,1520538856.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:16.507Z,1520538856.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:16.879Z,1520538856.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:16.895Z,1520538856.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:17.284Z,1520538857.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:17.300Z,1520538857.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:17.684Z,1520538857.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:17.699Z,1520538857.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:18.084Z,1520538858.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:18.099Z,1520538858.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:18.494Z,1520538858.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:18.521Z,1520538858.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:18.897Z,1520538858.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:18.912Z,1520538858.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:19.289Z,1520538859.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:19.305Z,1520538859.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:19.684Z,1520538859.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:19.699Z,1520538859.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:20.080Z,1520538860.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:20.095Z,1520538860.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:20.484Z,1520538860.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:20.499Z,1520538860.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:20.883Z,1520538860.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:20.898Z,1520538860.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:21.278Z,1520538861.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:21.294Z,1520538861.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:21.685Z,1520538861.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:21.701Z,1520538861.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:22.098Z,1520538862.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:22.129Z,1520538862.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:22.489Z,1520538862.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:22.510Z,1520538862.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:22.884Z,1520538862.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:22.899Z,1520538862.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:23.282Z,1520538863.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:23.297Z,1520538863.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:23.686Z,1520538863.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:23.701Z,1520538863.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:24.086Z,1520538864.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:24.102Z,1520538864.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:24.487Z,1520538864.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:24.503Z,1520538864.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:24.893Z,1520538864.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:24.908Z,1520538864.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:25.289Z,1520538865.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:25.305Z,1520538865.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:25.682Z,1520538865.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:25.697Z,1520538865.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:26.079Z,1520538866.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:26.106Z,1520538866.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:26.486Z,1520538866.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:26.501Z,1520538866.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:26.884Z,1520538866.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:26.899Z,1520538866.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:27.278Z,1520538867.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:27.298Z,1520538867.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:27.689Z,1520538867.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:27.705Z,1520538867.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:28.089Z,1520538868.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:28.104Z,1520538868.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:28.489Z,1520538868.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:28.504Z,1520538868.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:28.886Z,1520538868.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:28.902Z,1520538868.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:29.282Z,1520538869.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:29.297Z,1520538869.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:29.687Z,1520538869.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:29.702Z,1520538869.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:30.086Z,1520538870.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:30.101Z,1520538870.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:30.489Z,1520538870.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:30.505Z,1520538870.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:30.896Z,1520538870.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:30.910Z,1520538870.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:31.289Z,1520538871.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:31.305Z,1520538871.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:31.687Z,1520538871.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:31.702Z,1520538871.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:32.086Z,1520538872.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:32.101Z,1520538872.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:32.481Z,1520538872.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:32.502Z,1520538872.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:32.881Z,1520538872.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:32.900Z,1520538872.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:33.276Z,1520538873.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:33.301Z,1520538873.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:33.690Z,1520538873.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:33.706Z,1520538873.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:34.093Z,1520538874.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:34.108Z,1520538874.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:34.489Z,1520538874.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:34.510Z,1520538874.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:34.882Z,1520538874.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:34.902Z,1520538874.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:35.286Z,1520538875.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:35.301Z,1520538875.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:35.688Z,1520538875.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:35.703Z,1520538875.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:36.086Z,1520538876.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:36.102Z,1520538876.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:36.505Z,1520538876.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:36.535Z,1520538876.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:36.889Z,1520538876.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:36.904Z,1520538876.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:37.288Z,1520538877.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:37.303Z,1520538877.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:37.686Z,1520538877.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:37.701Z,1520538877.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:38.085Z,1520538878.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:38.099Z,1520538878.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:38.487Z,1520538878.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:38.510Z,1520538878.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:38.886Z,1520538878.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:38.906Z,1520538878.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:39.287Z,1520538879.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:39.302Z,1520538879.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:39.688Z,1520538879.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:39.711Z,1520538879.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:40.094Z,1520538880.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:40.109Z,1520538880.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:40.493Z,1520538880.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:40.515Z,1520538880.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:40.877Z,1520538880.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:40.897Z,1520538880.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:41.287Z,1520538881.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:41.303Z,1520538881.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:41.683Z,1520538881.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:41.699Z,1520538881.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:42.073Z,1520538882.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:42.097Z,1520538882.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:42.491Z,1520538882.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:42.507Z,1520538882.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:42.892Z,1520538882.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:42.907Z,1520538882.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:43.291Z,1520538883.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:43.310Z,1520538883.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:43.686Z,1520538883.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:43.706Z,1520538883.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:44.087Z,1520538884.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:44.102Z,1520538884.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:44.473Z,1520538884.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:44.496Z,1520538884.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:44.887Z,1520538884.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:44.902Z,1520538884.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:45.278Z,1520538885.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:45.294Z,1520538885.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:45.689Z,1520538885.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:45.704Z,1520538885.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:46.092Z,1520538886.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:46.107Z,1520538886.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:46.492Z,1520538886.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:46.507Z,1520538886.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:46.880Z,1520538886.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:46.895Z,1520538886.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:47.282Z,1520538887.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:47.297Z,1520538887.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:47.679Z,1520538887.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:47.694Z,1520538887.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:48.087Z,1520538888.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:48.102Z,1520538888.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:48.493Z,1520538888.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:48.508Z,1520538888.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:48.893Z,1520538888.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:48.908Z,1520538888.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:49.292Z,1520538889.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:49.307Z,1520538889.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:49.686Z,1520538889.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:49.706Z,1520538889.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:50.087Z,1520538890.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:50.102Z,1520538890.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:50.480Z,1520538890.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:50.495Z,1520538890.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:50.883Z,1520538890.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:50.906Z,1520538890.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:51.286Z,1520538891.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:51.301Z,1520538891.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:51.692Z,1520538891.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:51.707Z,1520538891.707 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:51.708Z,1520538891.708 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 243
2018-03-08T19:54:51.708Z,1520538891.708 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T19:54:51.710Z,1520538891.710 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:51.710Z,1520538891.710 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 243
2018-03-08T19:54:51.710Z,1520538891.710 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T19:54:51.711Z,1520538891.711 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:51.711Z,1520538891.711 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 243
2018-03-08T19:54:51.712Z,1520538891.712 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T19:54:51.732Z,1520538891.732 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T19:54:51.732Z,1520538891.732 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T19:54:51.732Z,1520538891.732 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T19:54:52.101Z,1520538892.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:52.148Z,1520538892.148 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T19:54:52.148Z,1520538892.148 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 243
2018-03-08T19:54:52.148Z,1520538892.148 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T19:54:52.148Z,1520538892.148 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 243
2018-03-08T19:54:52.153Z,1520538892.153 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T19:54:52.153Z,1520538892.153 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 243
2018-03-08T19:54:52.497Z,1520538892.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:52.511Z,1520538892.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T19:54:52.512Z,1520538892.512 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:54:52.512Z,1520538892.512 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:54:52.513Z,1520538892.513 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T19:54:52.513Z,1520538892.513 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:54:52.513Z,1520538892.513 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:54:52.514Z,1520538892.514 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T19:54:52.514Z,1520538892.514 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:54:52.514Z,1520538892.514 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:54:52.868Z,1520538892.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:52.896Z,1520538892.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T19:54:52.901Z,1520538892.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:53.278Z,1520538893.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:53.303Z,1520538893.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T19:54:53.305Z,1520538893.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:53.675Z,1520538893.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:53.701Z,1520538893.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T19:54:53.702Z,1520538893.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:54.079Z,1520538894.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:54.104Z,1520538894.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T19:54:54.105Z,1520538894.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:54.493Z,1520538894.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:54.508Z,1520538894.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T19:54:54.509Z,1520538894.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:54.897Z,1520538894.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:54.912Z,1520538894.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T19:54:54.913Z,1520538894.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:55.289Z,1520538895.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:55.304Z,1520538895.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T19:54:55.305Z,1520538895.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:55.690Z,1520538895.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:55.710Z,1520538895.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T19:54:55.711Z,1520538895.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:56.074Z,1520538896.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:56.101Z,1520538896.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T19:54:56.102Z,1520538896.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:56.470Z,1520538896.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:56.501Z,1520538896.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T19:54:56.502Z,1520538896.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:56.875Z,1520538896.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:56.910Z,1520538896.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T19:54:56.911Z,1520538896.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:57.278Z,1520538897.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:57.305Z,1520538897.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T19:54:57.306Z,1520538897.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:57.695Z,1520538897.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:57.710Z,1520538897.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T19:54:57.711Z,1520538897.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:58.097Z,1520538898.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:58.112Z,1520538898.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T19:54:58.113Z,1520538898.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:58.494Z,1520538898.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:58.509Z,1520538898.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T19:54:58.509Z,1520538898.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:58.873Z,1520538898.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:58.906Z,1520538898.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T19:54:58.907Z,1520538898.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:59.279Z,1520538899.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:59.310Z,1520538899.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T19:54:59.311Z,1520538899.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:54:59.671Z,1520538899.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:54:59.686Z,1520538899.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T19:54:59.687Z,1520538899.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:00.079Z,1520538900.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:00.114Z,1520538900.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T19:55:00.115Z,1520538900.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:00.502Z,1520538900.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:00.517Z,1520538900.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T19:55:00.518Z,1520538900.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:00.902Z,1520538900.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:00.922Z,1520538900.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T19:55:00.923Z,1520538900.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:01.290Z,1520538901.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:01.316Z,1520538901.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T19:55:01.317Z,1520538901.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:01.674Z,1520538901.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:01.718Z,1520538901.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T19:55:01.719Z,1520538901.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:02.074Z,1520538902.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:02.119Z,1520538902.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T19:55:02.120Z,1520538902.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:02.472Z,1520538902.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:02.488Z,1520538902.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T19:55:02.489Z,1520538902.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:02.887Z,1520538902.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:02.916Z,1520538902.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T19:55:02.917Z,1520538902.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:03.274Z,1520538903.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:03.289Z,1520538903.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T19:55:03.290Z,1520538903.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:06.410Z,1520538906.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:06.426Z,1520538906.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-03-08T19:55:06.427Z,1520538906.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:06.542Z,1520538906.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:06.586Z,1520538906.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T19:55:06.587Z,1520538906.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:06.893Z,1520538906.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:06.917Z,1520538906.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T19:55:06.918Z,1520538906.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:07.283Z,1520538907.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:07.298Z,1520538907.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T19:55:07.298Z,1520538907.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:07.679Z,1520538907.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:07.694Z,1520538907.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T19:55:07.695Z,1520538907.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:08.078Z,1520538908.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:08.098Z,1520538908.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T19:55:08.099Z,1520538908.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:08.493Z,1520538908.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:08.508Z,1520538908.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T19:55:08.526Z,1520538908.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:08.889Z,1520538908.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:08.904Z,1520538908.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T19:55:08.905Z,1520538908.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:09.298Z,1520538909.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:09.330Z,1520538909.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T19:55:09.331Z,1520538909.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:09.682Z,1520538909.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:09.697Z,1520538909.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T19:55:09.697Z,1520538909.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:10.082Z,1520538910.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:10.097Z,1520538910.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T19:55:10.098Z,1520538910.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:10.480Z,1520538910.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:10.503Z,1520538910.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T19:55:10.503Z,1520538910.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:10.897Z,1520538910.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:10.912Z,1520538910.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T19:55:10.937Z,1520538910.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:11.298Z,1520538911.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:11.333Z,1520538911.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T19:55:11.334Z,1520538911.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:11.689Z,1520538911.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:11.704Z,1520538911.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T19:55:11.705Z,1520538911.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:12.081Z,1520538912.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:12.096Z,1520538912.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:12.484Z,1520538912.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:12.499Z,1520538912.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:12.886Z,1520538912.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:12.906Z,1520538912.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:13.288Z,1520538913.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:13.303Z,1520538913.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:13.688Z,1520538913.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:13.703Z,1520538913.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:14.090Z,1520538914.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:14.110Z,1520538914.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:14.489Z,1520538914.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:14.504Z,1520538914.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:14.879Z,1520538914.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:14.899Z,1520538914.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:15.283Z,1520538915.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:15.298Z,1520538915.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:15.687Z,1520538915.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:15.702Z,1520538915.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:16.087Z,1520538916.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:16.103Z,1520538916.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:16.482Z,1520538916.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:16.502Z,1520538916.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:16.890Z,1520538916.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:16.905Z,1520538916.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:17.294Z,1520538917.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:17.309Z,1520538917.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:17.689Z,1520538917.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:17.705Z,1520538917.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:18.083Z,1520538918.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:18.098Z,1520538918.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:18.473Z,1520538918.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:18.494Z,1520538918.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:18.882Z,1520538918.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:18.901Z,1520538918.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:19.278Z,1520538919.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:19.298Z,1520538919.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:19.688Z,1520538919.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:19.711Z,1520538919.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:20.093Z,1520538920.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:20.108Z,1520538920.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:20.492Z,1520538920.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:20.507Z,1520538920.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:20.880Z,1520538920.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:20.896Z,1520538920.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:21.282Z,1520538921.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:21.297Z,1520538921.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:21.683Z,1520538921.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:21.698Z,1520538921.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:22.079Z,1520538922.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:22.101Z,1520538922.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:22.486Z,1520538922.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:22.506Z,1520538922.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:22.893Z,1520538922.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:22.908Z,1520538922.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:23.293Z,1520538923.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:23.309Z,1520538923.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:23.693Z,1520538923.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:23.708Z,1520538923.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:24.087Z,1520538924.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:24.102Z,1520538924.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:24.480Z,1520538924.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:24.495Z,1520538924.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:24.879Z,1520538924.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:24.901Z,1520538924.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:25.278Z,1520538925.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:25.293Z,1520538925.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:25.689Z,1520538925.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:25.704Z,1520538925.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:26.093Z,1520538926.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:26.108Z,1520538926.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:26.493Z,1520538926.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:26.508Z,1520538926.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:26.879Z,1520538926.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:26.898Z,1520538926.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:27.286Z,1520538927.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:27.306Z,1520538927.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:27.687Z,1520538927.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:27.702Z,1520538927.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:28.087Z,1520538928.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:28.102Z,1520538928.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:28.487Z,1520538928.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:28.503Z,1520538928.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:28.892Z,1520538928.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:28.907Z,1520538928.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:29.292Z,1520538929.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:29.307Z,1520538929.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:29.691Z,1520538929.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:29.710Z,1520538929.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:30.087Z,1520538930.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:30.101Z,1520538930.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:30.479Z,1520538930.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:30.498Z,1520538930.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:30.897Z,1520538930.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:30.912Z,1520538930.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:31.287Z,1520538931.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:31.302Z,1520538931.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:31.692Z,1520538931.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:31.707Z,1520538931.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:32.093Z,1520538932.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:32.108Z,1520538932.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:32.492Z,1520538932.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:32.507Z,1520538932.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:32.880Z,1520538932.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:32.895Z,1520538932.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:33.280Z,1520538933.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:33.305Z,1520538933.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:33.687Z,1520538933.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:33.702Z,1520538933.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:34.087Z,1520538934.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:34.103Z,1520538934.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:34.486Z,1520538934.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:34.502Z,1520538934.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:34.892Z,1520538934.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:34.908Z,1520538934.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:35.293Z,1520538935.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:35.308Z,1520538935.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:35.692Z,1520538935.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:35.714Z,1520538935.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:36.088Z,1520538936.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:36.103Z,1520538936.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:36.476Z,1520538936.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:36.506Z,1520538936.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:36.883Z,1520538936.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:36.902Z,1520538936.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:37.283Z,1520538937.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:37.298Z,1520538937.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:37.693Z,1520538937.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:37.708Z,1520538937.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:38.093Z,1520538938.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:38.109Z,1520538938.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:38.490Z,1520538938.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:38.505Z,1520538938.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:38.879Z,1520538938.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:38.899Z,1520538938.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:39.282Z,1520538939.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:39.303Z,1520538939.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:39.687Z,1520538939.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:39.702Z,1520538939.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:40.087Z,1520538940.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:40.103Z,1520538940.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:40.482Z,1520538940.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:40.503Z,1520538940.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:40.893Z,1520538940.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:40.908Z,1520538940.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:41.291Z,1520538941.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:41.311Z,1520538941.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:41.691Z,1520538941.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:41.707Z,1520538941.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:42.111Z,1520538942.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:42.141Z,1520538942.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:42.482Z,1520538942.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:42.497Z,1520538942.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:42.889Z,1520538942.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:42.913Z,1520538942.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:43.276Z,1520538943.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:43.345Z,1520538943.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:43.695Z,1520538943.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:43.710Z,1520538943.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:44.101Z,1520538944.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:44.116Z,1520538944.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:44.485Z,1520538944.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:44.510Z,1520538944.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:44.879Z,1520538944.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:44.899Z,1520538944.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:45.283Z,1520538945.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:45.302Z,1520538945.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:45.685Z,1520538945.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:45.700Z,1520538945.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:46.109Z,1520538946.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:46.130Z,1520538946.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:46.482Z,1520538946.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:46.502Z,1520538946.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:46.888Z,1520538946.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:46.910Z,1520538946.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:47.293Z,1520538947.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:47.308Z,1520538947.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:47.687Z,1520538947.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:47.703Z,1520538947.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:48.086Z,1520538948.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:48.101Z,1520538948.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:48.486Z,1520538948.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:48.506Z,1520538948.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:48.886Z,1520538948.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:48.901Z,1520538948.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:49.286Z,1520538949.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:49.301Z,1520538949.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:49.689Z,1520538949.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:49.704Z,1520538949.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:50.093Z,1520538950.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:50.108Z,1520538950.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:50.490Z,1520538950.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:50.505Z,1520538950.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:50.879Z,1520538950.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:50.899Z,1520538950.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:51.283Z,1520538951.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:51.297Z,1520538951.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:51.683Z,1520538951.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:51.698Z,1520538951.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:52.084Z,1520538952.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:52.099Z,1520538952.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:52.487Z,1520538952.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:52.503Z,1520538952.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:52.892Z,1520538952.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:52.907Z,1520538952.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:53.304Z,1520538953.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:53.319Z,1520538953.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:53.685Z,1520538953.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:53.712Z,1520538953.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:54.074Z,1520538954.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:54.105Z,1520538954.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:54.475Z,1520538954.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:54.491Z,1520538954.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:54.876Z,1520538954.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:54.891Z,1520538954.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:55.276Z,1520538955.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:55.328Z,1520538955.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:55.687Z,1520538955.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:55.707Z,1520538955.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:56.096Z,1520538956.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:56.111Z,1520538956.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:56.493Z,1520538956.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:56.508Z,1520538956.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:56.870Z,1520538956.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:56.902Z,1520538956.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:57.287Z,1520538957.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:57.302Z,1520538957.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:57.686Z,1520538957.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:57.701Z,1520538957.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:58.087Z,1520538958.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:58.103Z,1520538958.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:58.486Z,1520538958.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:58.501Z,1520538958.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:58.893Z,1520538958.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:58.909Z,1520538958.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:59.295Z,1520538959.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:59.311Z,1520538959.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:55:59.696Z,1520538959.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:55:59.719Z,1520538959.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:00.085Z,1520538960.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:00.104Z,1520538960.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:00.486Z,1520538960.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:00.506Z,1520538960.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:00.881Z,1520538960.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:00.901Z,1520538960.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:01.282Z,1520538961.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:01.298Z,1520538961.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:01.693Z,1520538961.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:01.708Z,1520538961.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:02.097Z,1520538962.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:02.112Z,1520538962.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:02.489Z,1520538962.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:02.504Z,1520538962.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:02.870Z,1520538962.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:02.902Z,1520538962.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:03.277Z,1520538963.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:03.300Z,1520538963.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:03.683Z,1520538963.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:03.699Z,1520538963.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:06.790Z,1520538966.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:06.806Z,1520538966.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:06.896Z,1520538966.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:06.941Z,1520538966.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:07.281Z,1520538967.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:07.296Z,1520538967.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:07.669Z,1520538967.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:07.696Z,1520538967.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:08.081Z,1520538968.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:08.096Z,1520538968.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:08.462Z,1520538968.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:08.494Z,1520538968.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:08.863Z,1520538968.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:08.897Z,1520538968.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:09.256Z,1520538969.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:09.271Z,1520538969.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:09.673Z,1520538969.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:09.700Z,1520538969.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:10.069Z,1520538970.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:10.103Z,1520538970.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:10.465Z,1520538970.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:10.500Z,1520538970.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:10.859Z,1520538970.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:10.875Z,1520538970.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:11.262Z,1520538971.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:11.277Z,1520538971.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:11.656Z,1520538971.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:11.672Z,1520538971.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:12.058Z,1520538972.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:12.078Z,1520538972.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:12.473Z,1520538972.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:12.506Z,1520538972.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:12.871Z,1520538972.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:12.907Z,1520538972.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:13.275Z,1520538973.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:13.321Z,1520538973.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:13.664Z,1520538973.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:13.721Z,1520538973.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:14.063Z,1520538974.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:14.078Z,1520538974.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:14.465Z,1520538974.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:14.480Z,1520538974.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:14.863Z,1520538974.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:14.878Z,1520538974.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:15.260Z,1520538975.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:15.287Z,1520538975.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:15.671Z,1520538975.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:15.691Z,1520538975.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:16.072Z,1520538976.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:16.087Z,1520538976.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:16.472Z,1520538976.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:16.488Z,1520538976.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:16.862Z,1520538976.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:16.877Z,1520538976.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:17.263Z,1520538977.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:17.282Z,1520538977.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:17.667Z,1520538977.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:17.682Z,1520538977.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:18.066Z,1520538978.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:18.081Z,1520538978.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:18.473Z,1520538978.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:18.489Z,1520538978.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:18.872Z,1520538978.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:18.887Z,1520538978.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:19.272Z,1520538979.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:19.287Z,1520538979.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:19.662Z,1520538979.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:19.677Z,1520538979.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:20.057Z,1520538980.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:20.089Z,1520538980.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:20.466Z,1520538980.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:20.481Z,1520538980.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:20.863Z,1520538980.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:20.879Z,1520538980.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:21.258Z,1520538981.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:21.281Z,1520538981.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:21.673Z,1520538981.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:21.688Z,1520538981.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:22.076Z,1520538982.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:22.091Z,1520538982.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:22.476Z,1520538982.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:22.491Z,1520538982.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:22.857Z,1520538982.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:22.880Z,1520538982.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:23.261Z,1520538983.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:23.277Z,1520538983.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:23.661Z,1520538983.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:23.681Z,1520538983.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:24.061Z,1520538984.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:24.082Z,1520538984.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:24.473Z,1520538984.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:24.488Z,1520538984.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:24.872Z,1520538984.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:24.887Z,1520538984.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:25.276Z,1520538985.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:25.291Z,1520538985.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:25.667Z,1520538985.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:25.682Z,1520538985.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:26.066Z,1520538986.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:26.086Z,1520538986.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:26.466Z,1520538986.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:26.481Z,1520538986.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:26.864Z,1520538986.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:26.879Z,1520538986.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:27.267Z,1520538987.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:27.286Z,1520538987.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:27.676Z,1520538987.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:27.692Z,1520538987.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:28.076Z,1520538988.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:28.092Z,1520538988.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:28.477Z,1520538988.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:28.498Z,1520538988.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:28.869Z,1520538988.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:28.884Z,1520538988.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:29.264Z,1520538989.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:29.279Z,1520538989.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:29.668Z,1520538989.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:29.683Z,1520538989.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:30.057Z,1520538990.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:30.089Z,1520538990.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:30.478Z,1520538990.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:30.494Z,1520538990.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:30.875Z,1520538990.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:30.894Z,1520538990.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:31.278Z,1520538991.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:31.293Z,1520538991.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:31.654Z,1520538991.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:31.685Z,1520538991.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:32.058Z,1520538992.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:32.092Z,1520538992.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:32.454Z,1520538992.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:32.491Z,1520538992.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:32.855Z,1520538992.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:32.894Z,1520538992.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:33.258Z,1520538993.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:33.290Z,1520538993.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:33.678Z,1520538993.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:33.694Z,1520538993.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:34.078Z,1520538994.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:34.094Z,1520538994.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:34.477Z,1520538994.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:34.492Z,1520538994.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:34.854Z,1520538994.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:34.890Z,1520538994.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:35.254Z,1520538995.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:35.293Z,1520538995.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:35.660Z,1520538995.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:35.691Z,1520538995.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:36.058Z,1520538996.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:36.095Z,1520538996.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:36.473Z,1520538996.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:36.498Z,1520538996.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:36.865Z,1520538996.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:36.880Z,1520538996.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:37.273Z,1520538997.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:37.305Z,1520538997.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:37.659Z,1520538997.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:37.675Z,1520538997.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:38.062Z,1520538998.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:38.082Z,1520538998.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:38.462Z,1520538998.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:38.483Z,1520538998.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:38.864Z,1520538998.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:38.879Z,1520538998.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:39.259Z,1520538999.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:39.275Z,1520538999.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:39.669Z,1520538999.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:39.685Z,1520538999.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:40.077Z,1520539000.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:40.108Z,1520539000.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:40.477Z,1520539000.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:40.507Z,1520539000.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:40.865Z,1520539000.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:40.881Z,1520539000.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:41.263Z,1520539001.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:41.278Z,1520539001.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:41.662Z,1520539001.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:41.677Z,1520539001.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:42.061Z,1520539002.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:42.077Z,1520539002.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:42.465Z,1520539002.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:42.481Z,1520539002.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:42.865Z,1520539002.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:42.880Z,1520539002.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:43.269Z,1520539003.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:43.284Z,1520539003.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:43.663Z,1520539003.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:43.678Z,1520539003.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:44.060Z,1520539004.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:44.075Z,1520539004.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:44.463Z,1520539004.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:44.479Z,1520539004.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:44.864Z,1520539004.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:44.878Z,1520539004.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:45.264Z,1520539005.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:45.280Z,1520539005.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:45.665Z,1520539005.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:45.681Z,1520539005.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:46.077Z,1520539006.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:46.109Z,1520539006.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:46.465Z,1520539006.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:46.481Z,1520539006.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:46.860Z,1520539006.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:46.884Z,1520539006.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:47.263Z,1520539007.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:47.279Z,1520539007.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:47.666Z,1520539007.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:47.681Z,1520539007.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:48.063Z,1520539008.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:48.079Z,1520539008.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:48.468Z,1520539008.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:48.487Z,1520539008.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:48.867Z,1520539008.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:48.886Z,1520539008.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:49.269Z,1520539009.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:49.285Z,1520539009.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:49.663Z,1520539009.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:49.682Z,1520539009.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:50.062Z,1520539010.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:50.077Z,1520539010.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:50.461Z,1520539010.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:50.477Z,1520539010.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:50.863Z,1520539010.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:50.888Z,1520539010.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:51.260Z,1520539011.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:51.275Z,1520539011.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:51.668Z,1520539011.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:51.691Z,1520539011.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:52.074Z,1520539012.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:52.094Z,1520539012.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:52.469Z,1520539012.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:52.485Z,1520539012.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:52.864Z,1520539012.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:52.879Z,1520539012.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:53.264Z,1520539013.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:53.279Z,1520539013.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:53.663Z,1520539013.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:53.678Z,1520539013.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:54.063Z,1520539014.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:54.078Z,1520539014.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:54.469Z,1520539014.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:54.491Z,1520539014.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:54.869Z,1520539014.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:54.884Z,1520539014.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:55.268Z,1520539015.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:55.290Z,1520539015.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:55.668Z,1520539015.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:55.683Z,1520539015.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:56.059Z,1520539016.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:56.079Z,1520539016.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:56.462Z,1520539016.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:56.478Z,1520539016.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:56.861Z,1520539016.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:56.886Z,1520539016.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:57.266Z,1520539017.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:57.283Z,1520539017.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:57.672Z,1520539017.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:57.695Z,1520539017.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:58.073Z,1520539018.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:58.089Z,1520539018.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:58.471Z,1520539018.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:58.487Z,1520539018.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:58.866Z,1520539018.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:58.886Z,1520539018.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:59.263Z,1520539019.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:59.278Z,1520539019.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:56:59.668Z,1520539019.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:56:59.683Z,1520539019.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:00.070Z,1520539020.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:00.085Z,1520539020.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:00.472Z,1520539020.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:00.495Z,1520539020.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:00.879Z,1520539020.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:00.898Z,1520539020.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:01.276Z,1520539021.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:01.291Z,1520539021.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:01.654Z,1520539021.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:01.693Z,1520539021.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:02.065Z,1520539022.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:02.084Z,1520539022.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:02.455Z,1520539022.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:02.483Z,1520539022.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:02.859Z,1520539022.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:02.887Z,1520539022.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:03.254Z,1520539023.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:03.280Z,1520539023.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:03.672Z,1520539023.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:03.694Z,1520539023.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:04.078Z,1520539024.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:04.093Z,1520539024.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:04.469Z,1520539024.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:04.492Z,1520539024.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:04.505Z,1520539024.505 [CBIT](INFO): Clearing failed state for component DropWeight
2018-03-08T19:57:04.505Z,1520539024.505 [DropWeight] No Fault, FailCount= 1
2018-03-08T19:57:07.580Z,1520539027.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:07.596Z,1520539027.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:07.697Z,1520539027.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:07.736Z,1520539027.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:08.074Z,1520539028.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:08.089Z,1520539028.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:08.476Z,1520539028.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:08.492Z,1520539028.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:08.854Z,1520539028.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:08.886Z,1520539028.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:09.252Z,1520539029.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:09.289Z,1520539029.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:09.661Z,1520539029.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:09.710Z,1520539029.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:10.054Z,1520539030.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:10.069Z,1520539030.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:10.448Z,1520539030.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:10.471Z,1520539030.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:10.874Z,1520539030.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:10.918Z,1520539030.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:11.259Z,1520539031.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:11.304Z,1520539031.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:11.658Z,1520539031.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:11.679Z,1520539031.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:12.056Z,1520539032.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:12.072Z,1520539032.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:12.455Z,1520539032.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:12.470Z,1520539032.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:12.849Z,1520539032.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:12.877Z,1520539032.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:13.243Z,1520539033.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:13.270Z,1520539033.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:13.652Z,1520539033.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:13.684Z,1520539033.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:14.068Z,1520539034.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:14.084Z,1520539034.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:14.465Z,1520539034.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:14.480Z,1520539034.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:14.841Z,1520539034.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:14.878Z,1520539034.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:15.255Z,1520539035.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:15.270Z,1520539035.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:15.639Z,1520539035.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:15.674Z,1520539035.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:16.041Z,1520539036.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:16.075Z,1520539036.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:16.443Z,1520539036.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:16.478Z,1520539036.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:16.866Z,1520539036.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:16.881Z,1520539036.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:17.261Z,1520539037.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:17.277Z,1520539037.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:17.661Z,1520539037.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:17.677Z,1520539037.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:18.043Z,1520539038.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:18.074Z,1520539038.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:18.455Z,1520539038.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:18.470Z,1520539038.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:18.842Z,1520539038.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:18.879Z,1520539038.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:19.255Z,1520539039.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:19.284Z,1520539039.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:19.658Z,1520539039.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:19.673Z,1520539039.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:20.065Z,1520539040.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:20.080Z,1520539040.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:20.466Z,1520539040.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:20.481Z,1520539040.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:20.840Z,1520539040.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:20.875Z,1520539040.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:21.243Z,1520539041.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:21.277Z,1520539041.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:21.640Z,1520539041.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:21.676Z,1520539041.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:22.041Z,1520539042.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:22.075Z,1520539042.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:22.443Z,1520539042.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:22.474Z,1520539042.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:22.866Z,1520539042.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:22.881Z,1520539042.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:23.261Z,1520539043.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:23.277Z,1520539043.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:23.661Z,1520539043.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:23.681Z,1520539043.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:24.055Z,1520539044.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:24.070Z,1520539044.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:24.455Z,1520539044.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:24.471Z,1520539044.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:24.843Z,1520539044.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:24.893Z,1520539044.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:25.246Z,1520539045.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:25.274Z,1520539045.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:25.653Z,1520539045.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:25.677Z,1520539045.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:26.065Z,1520539046.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:26.080Z,1520539046.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:26.459Z,1520539046.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:26.489Z,1520539046.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:26.840Z,1520539046.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:26.874Z,1520539046.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:27.243Z,1520539047.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:27.269Z,1520539047.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:27.639Z,1520539047.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:27.675Z,1520539047.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:28.046Z,1520539048.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:28.073Z,1520539048.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:28.443Z,1520539048.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:28.470Z,1520539048.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:28.866Z,1520539048.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:28.881Z,1520539048.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:29.269Z,1520539049.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:29.290Z,1520539049.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:29.666Z,1520539049.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:29.681Z,1520539049.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:30.043Z,1520539050.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:30.076Z,1520539050.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:30.444Z,1520539050.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:30.472Z,1520539050.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:30.848Z,1520539050.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:30.875Z,1520539050.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:31.243Z,1520539051.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:31.277Z,1520539051.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:31.657Z,1520539051.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:31.681Z,1520539051.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:32.061Z,1520539052.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:32.084Z,1520539052.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:32.097Z,1520539052.097 [CBIT](IMPORTANT): Beginning ground fault scan
2018-03-08T19:57:32.462Z,1520539052.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:32.477Z,1520539052.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:32.840Z,1520539052.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:32.872Z,1520539052.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:33.247Z,1520539053.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:33.279Z,1520539053.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:33.643Z,1520539053.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:33.678Z,1520539053.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:34.038Z,1520539054.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:34.053Z,1520539054.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:34.451Z,1520539054.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:34.481Z,1520539054.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:34.872Z,1520539054.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:34.887Z,1520539054.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:35.258Z,1520539055.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:35.284Z,1520539055.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:35.671Z,1520539055.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:35.687Z,1520539055.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:36.048Z,1520539056.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:36.080Z,1520539056.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:36.438Z,1520539056.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:36.458Z,1520539056.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:36.846Z,1520539056.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:36.883Z,1520539056.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:37.246Z,1520539057.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:37.261Z,1520539057.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:37.649Z,1520539057.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:37.671Z,1520539057.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:38.061Z,1520539058.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:38.076Z,1520539058.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:38.464Z,1520539058.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:38.479Z,1520539058.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:38.844Z,1520539058.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:38.868Z,1520539058.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:39.253Z,1520539059.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:39.268Z,1520539059.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:39.654Z,1520539059.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:39.669Z,1520539059.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:40.056Z,1520539060.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:40.071Z,1520539060.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:40.452Z,1520539060.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:40.467Z,1520539060.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:40.858Z,1520539060.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:40.873Z,1520539060.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:41.261Z,1520539061.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:41.277Z,1520539061.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:41.658Z,1520539061.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:41.673Z,1520539061.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:42.052Z,1520539062.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:42.111Z,1520539062.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:42.454Z,1520539062.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:42.474Z,1520539062.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:42.846Z,1520539062.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:42.882Z,1520539062.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:42.930Z,1520539062.930 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.126585
CHAN A1 (24V): -0.011710
CHAN A2 (12V): 0.001052
CHAN A3 (5V): -0.001335
CHAN B0 (3.3V): 0.000626
CHAN B1 (3.15aV): -0.000149
CHAN B2 (3.15bV): -0.000855
CHAN B3 (GND): -0.000344
OPEN: 0.005615
Full Scale Calc: 4.765 mA, -1.589 mA
2018-03-08T19:57:43.245Z,1520539063.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:43.279Z,1520539063.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:43.665Z,1520539063.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:43.689Z,1520539063.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:44.083Z,1520539064.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:44.098Z,1520539064.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:44.457Z,1520539064.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:44.515Z,1520539064.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:44.847Z,1520539064.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:44.887Z,1520539064.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:45.248Z,1520539065.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:45.264Z,1520539065.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:45.648Z,1520539065.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:45.728Z,1520539065.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:46.048Z,1520539066.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:46.065Z,1520539066.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:46.455Z,1520539066.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:46.491Z,1520539066.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:46.867Z,1520539066.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:46.897Z,1520539066.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:47.261Z,1520539067.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:47.293Z,1520539067.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:47.665Z,1520539067.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:47.697Z,1520539067.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:48.055Z,1520539068.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:48.070Z,1520539068.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:48.451Z,1520539068.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:48.466Z,1520539068.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:48.845Z,1520539068.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:48.883Z,1520539068.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:49.240Z,1520539069.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:49.267Z,1520539069.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:49.654Z,1520539069.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:49.681Z,1520539069.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:50.069Z,1520539070.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:50.084Z,1520539070.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:50.456Z,1520539070.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:50.487Z,1520539070.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:50.836Z,1520539070.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:50.863Z,1520539070.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:51.246Z,1520539071.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:51.273Z,1520539071.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:51.643Z,1520539071.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:51.679Z,1520539071.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:52.047Z,1520539072.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:52.074Z,1520539072.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:52.442Z,1520539072.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:52.474Z,1520539072.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:52.864Z,1520539072.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:52.888Z,1520539072.888 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:52.888Z,1520539072.888 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 244
2018-03-08T19:57:52.888Z,1520539072.888 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T19:57:52.890Z,1520539072.890 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:52.890Z,1520539072.890 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 244
2018-03-08T19:57:52.890Z,1520539072.890 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T19:57:52.891Z,1520539072.891 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:52.892Z,1520539072.892 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 244
2018-03-08T19:57:52.892Z,1520539072.892 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T19:57:52.912Z,1520539072.912 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T19:57:52.912Z,1520539072.912 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T19:57:52.912Z,1520539072.912 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T19:57:53.263Z,1520539073.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:53.305Z,1520539073.305 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T19:57:53.305Z,1520539073.305 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 244
2018-03-08T19:57:53.305Z,1520539073.305 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T19:57:53.305Z,1520539073.305 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 244
2018-03-08T19:57:53.306Z,1520539073.306 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T19:57:53.306Z,1520539073.306 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 244
2018-03-08T19:57:53.653Z,1520539073.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:53.690Z,1520539073.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T19:57:53.691Z,1520539073.691 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:57:53.691Z,1520539073.691 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:57:53.691Z,1520539073.691 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T19:57:53.692Z,1520539073.692 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:57:53.692Z,1520539073.692 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:57:53.692Z,1520539073.692 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T19:57:53.693Z,1520539073.693 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T19:57:53.693Z,1520539073.693 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T19:57:54.043Z,1520539074.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:54.077Z,1520539074.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T19:57:54.078Z,1520539074.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:54.447Z,1520539074.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:54.482Z,1520539074.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T19:57:54.483Z,1520539074.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:54.843Z,1520539074.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:54.858Z,1520539074.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T19:57:54.859Z,1520539074.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:55.244Z,1520539075.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:55.259Z,1520539075.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T19:57:55.260Z,1520539075.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:55.649Z,1520539075.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:55.664Z,1520539075.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T19:57:55.681Z,1520539075.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:56.065Z,1520539076.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:56.094Z,1520539076.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T19:57:56.095Z,1520539076.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:56.461Z,1520539076.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:56.490Z,1520539076.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T19:57:56.491Z,1520539076.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:56.840Z,1520539076.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:56.855Z,1520539076.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T19:57:56.856Z,1520539076.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:57.248Z,1520539077.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:57.263Z,1520539077.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T19:57:57.264Z,1520539077.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:57.647Z,1520539077.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:57.662Z,1520539077.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T19:57:57.663Z,1520539077.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:58.052Z,1520539078.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:58.066Z,1520539078.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T19:57:58.067Z,1520539078.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:58.449Z,1520539078.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:58.465Z,1520539078.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T19:57:58.466Z,1520539078.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:58.861Z,1520539078.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:58.876Z,1520539078.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T19:57:58.885Z,1520539078.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:59.265Z,1520539079.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:59.298Z,1520539079.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T19:57:59.299Z,1520539079.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:57:59.657Z,1520539079.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:57:59.672Z,1520539079.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T19:57:59.673Z,1520539079.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:00.047Z,1520539080.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:00.062Z,1520539080.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T19:58:00.063Z,1520539080.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:00.443Z,1520539080.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:00.468Z,1520539080.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T19:58:00.469Z,1520539080.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:00.855Z,1520539080.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:00.869Z,1520539080.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T19:58:00.870Z,1520539080.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:01.255Z,1520539081.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:01.270Z,1520539081.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T19:58:01.271Z,1520539081.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:01.657Z,1520539081.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:01.687Z,1520539081.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T19:58:01.689Z,1520539081.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:02.065Z,1520539082.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:02.080Z,1520539082.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T19:58:02.081Z,1520539082.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:02.085Z,1520539082.085 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T19:53:01.8Z
2018-03-08T19:58:02.085Z,1520539082.085 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T19:58:02.085Z,1520539082.085 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T19:58:02.463Z,1520539082.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:02.489Z,1520539082.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T19:58:02.490Z,1520539082.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:02.932Z,1520539082.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:02.948Z,1520539082.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T19:58:02.949Z,1520539082.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:03.246Z,1520539083.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:03.280Z,1520539083.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T19:58:03.281Z,1520539083.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:06.351Z,1520539086.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:06.375Z,1520539086.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2018-03-08T19:58:06.376Z,1520539086.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:06.473Z,1520539086.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:06.517Z,1520539086.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T19:58:06.518Z,1520539086.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:06.808Z,1520539086.808 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0284.lzma
2018-03-08T19:58:06.854Z,1520539086.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:06.882Z,1520539086.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T19:58:06.883Z,1520539086.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:07.242Z,1520539087.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:07.273Z,1520539087.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T19:58:07.274Z,1520539087.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:07.634Z,1520539087.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:07.657Z,1520539087.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T19:58:07.658Z,1520539087.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:08.003Z,1520539088.003 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0284.lzma.bak
2018-03-08T19:58:08.004Z,1520539088.004 [DataOverHttps](INFO): SBD MOMSN=7988667
2018-03-08T19:58:08.035Z,1520539088.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:08.063Z,1520539088.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T19:58:08.064Z,1520539088.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:08.611Z,1520539088.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:08.640Z,1520539088.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-03-08T19:58:08.641Z,1520539088.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:08.831Z,1520539088.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:08.850Z,1520539088.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T19:58:08.851Z,1520539088.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:12.075Z,1520539092.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:12.092Z,1520539092.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T19:58:12.093Z,1520539092.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:12.201Z,1520539092.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:12.240Z,1520539092.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-03-08T19:58:12.241Z,1520539092.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:12.561Z,1520539092.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:12.584Z,1520539092.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T19:58:12.585Z,1520539092.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:12.943Z,1520539092.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:12.958Z,1520539092.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:13.352Z,1520539093.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:13.368Z,1520539093.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:13.749Z,1520539093.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:13.765Z,1520539093.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:14.145Z,1520539094.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:14.160Z,1520539094.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:17.411Z,1520539097.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:17.434Z,1520539097.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:17.537Z,1520539097.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:17.565Z,1520539097.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:17.909Z,1520539097.909 [DataOverHttps](INFO): Sending 325 bytes from file Logs/20180308T074127/Express0285.lzma
2018-03-08T19:58:17.949Z,1520539097.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:17.979Z,1520539097.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:18.311Z,1520539098.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:18.330Z,1520539098.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:21.316Z,1520539101.316 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0285.lzma.bak
2018-03-08T19:58:21.316Z,1520539101.316 [DataOverHttps](INFO): SBD MOMSN=7988669
2018-03-08T19:58:21.341Z,1520539101.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:21.367Z,1520539101.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:22.506Z,1520539102.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:22.530Z,1520539102.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:22.534Z,1520539102.534 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T19:58:22.534Z,1520539102.534 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T19:58:22.534Z,1520539102.534 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T19:58:22.639Z,1520539102.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:22.658Z,1520539102.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:23.001Z,1520539103.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:23.039Z,1520539103.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:26.089Z,1520539106.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:26.110Z,1520539106.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:26.205Z,1520539106.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:26.236Z,1520539106.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:26.592Z,1520539106.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:26.607Z,1520539106.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:26.987Z,1520539106.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:27.033Z,1520539107.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:27.389Z,1520539107.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:27.405Z,1520539107.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:27.793Z,1520539107.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:27.808Z,1520539107.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:28.201Z,1520539108.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:28.236Z,1520539108.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:28.580Z,1520539108.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:28.596Z,1520539108.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:28.983Z,1520539108.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:29.013Z,1520539109.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:29.388Z,1520539109.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:29.403Z,1520539109.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:29.788Z,1520539109.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:29.811Z,1520539109.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:30.197Z,1520539110.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:30.212Z,1520539110.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:30.598Z,1520539110.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:30.618Z,1520539110.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:30.972Z,1520539110.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:31.007Z,1520539111.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:31.391Z,1520539111.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:31.407Z,1520539111.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:31.784Z,1520539111.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:31.799Z,1520539111.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:32.179Z,1520539112.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:32.202Z,1520539112.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:32.596Z,1520539112.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:32.612Z,1520539112.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:32.997Z,1520539112.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:33.012Z,1520539113.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:33.393Z,1520539113.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:33.412Z,1520539113.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:33.783Z,1520539113.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:33.806Z,1520539113.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:34.187Z,1520539114.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:34.214Z,1520539114.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:34.597Z,1520539114.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:34.613Z,1520539114.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:34.996Z,1520539114.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:35.011Z,1520539115.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:35.397Z,1520539115.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:35.412Z,1520539115.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:35.772Z,1520539115.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:35.808Z,1520539115.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:36.192Z,1520539116.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:36.207Z,1520539116.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:36.584Z,1520539116.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:36.606Z,1520539116.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:36.980Z,1520539116.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:37.007Z,1520539117.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:37.391Z,1520539117.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:37.410Z,1520539117.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:37.799Z,1520539117.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:37.814Z,1520539117.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:38.202Z,1520539118.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:38.217Z,1520539118.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:38.601Z,1520539118.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:38.616Z,1520539118.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:38.975Z,1520539118.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:39.009Z,1520539119.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:39.388Z,1520539119.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:39.410Z,1520539119.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:39.792Z,1520539119.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:39.807Z,1520539119.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:40.175Z,1520539120.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:40.204Z,1520539120.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:40.596Z,1520539120.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:40.619Z,1520539120.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:41.004Z,1520539121.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:41.019Z,1520539121.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:41.402Z,1520539121.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:41.417Z,1520539121.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:41.776Z,1520539121.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:41.810Z,1520539121.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:42.179Z,1520539122.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:42.211Z,1520539122.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:42.579Z,1520539122.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:42.606Z,1520539122.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:42.978Z,1520539122.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:43.005Z,1520539123.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:43.378Z,1520539123.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:43.410Z,1520539123.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:43.802Z,1520539123.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:43.817Z,1520539123.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:44.204Z,1520539124.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:44.227Z,1520539124.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:44.601Z,1520539124.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:44.616Z,1520539124.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:44.980Z,1520539124.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:45.019Z,1520539125.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:45.376Z,1520539125.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:45.410Z,1520539125.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:45.779Z,1520539125.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:45.805Z,1520539125.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:46.179Z,1520539126.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:46.212Z,1520539126.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:46.593Z,1520539126.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:46.609Z,1520539126.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:47.002Z,1520539127.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:47.017Z,1520539127.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:47.397Z,1520539127.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:47.420Z,1520539127.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:47.775Z,1520539127.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:47.807Z,1520539127.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:48.179Z,1520539128.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:48.218Z,1520539128.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:48.583Z,1520539128.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:48.618Z,1520539128.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:48.976Z,1520539128.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:49.010Z,1520539129.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:49.397Z,1520539129.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:49.413Z,1520539129.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:49.803Z,1520539129.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:49.818Z,1520539129.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:50.202Z,1520539130.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:50.222Z,1520539130.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:50.583Z,1520539130.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:50.609Z,1520539130.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:50.980Z,1520539130.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:51.012Z,1520539131.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:51.376Z,1520539131.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:51.403Z,1520539131.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:51.803Z,1520539131.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:51.818Z,1520539131.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:52.201Z,1520539132.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:52.222Z,1520539132.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:52.601Z,1520539132.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:52.621Z,1520539132.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:52.982Z,1520539132.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:53.015Z,1520539133.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:53.379Z,1520539133.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:53.403Z,1520539133.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:53.784Z,1520539133.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:53.815Z,1520539133.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:54.187Z,1520539134.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:54.221Z,1520539134.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:54.609Z,1520539134.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:54.625Z,1520539134.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:54.997Z,1520539134.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:55.020Z,1520539135.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:55.406Z,1520539135.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:55.421Z,1520539135.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:55.792Z,1520539135.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:55.827Z,1520539135.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:56.184Z,1520539136.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:56.219Z,1520539136.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:56.585Z,1520539136.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:56.617Z,1520539136.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:56.983Z,1520539136.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:56.999Z,1520539136.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:57.402Z,1520539137.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:57.427Z,1520539137.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:57.797Z,1520539137.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:57.828Z,1520539137.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:58.198Z,1520539138.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:58.226Z,1520539138.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:58.590Z,1520539138.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:58.677Z,1520539138.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:58.986Z,1520539138.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:59.005Z,1520539139.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:59.401Z,1520539139.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:59.434Z,1520539139.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:58:59.793Z,1520539139.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:58:59.809Z,1520539139.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:00.194Z,1520539140.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:00.209Z,1520539140.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:00.589Z,1520539140.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:00.604Z,1520539140.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:00.980Z,1520539140.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:01.007Z,1520539141.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:01.404Z,1520539141.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:01.437Z,1520539141.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:01.793Z,1520539141.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:01.809Z,1520539141.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:02.198Z,1520539142.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:02.218Z,1520539142.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:02.593Z,1520539142.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:02.608Z,1520539142.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:02.991Z,1520539142.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:03.006Z,1520539143.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:03.390Z,1520539143.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:03.406Z,1520539143.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:03.785Z,1520539143.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:03.816Z,1520539143.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:04.194Z,1520539144.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:04.209Z,1520539144.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:04.593Z,1520539144.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:04.611Z,1520539144.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:04.997Z,1520539144.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:05.013Z,1520539145.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:05.397Z,1520539145.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:05.412Z,1520539145.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:05.779Z,1520539145.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:05.801Z,1520539145.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:06.183Z,1520539146.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:06.206Z,1520539146.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:06.592Z,1520539146.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:06.607Z,1520539146.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:06.993Z,1520539146.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:07.008Z,1520539147.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:07.387Z,1520539147.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:07.406Z,1520539147.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:07.797Z,1520539147.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:07.812Z,1520539147.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:08.198Z,1520539148.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:08.214Z,1520539148.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:08.597Z,1520539148.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:08.612Z,1520539148.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:08.985Z,1520539148.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:09.000Z,1520539149.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:09.379Z,1520539149.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:09.402Z,1520539149.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:09.783Z,1520539149.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:09.806Z,1520539149.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:10.187Z,1520539150.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:10.228Z,1520539150.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:10.601Z,1520539150.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:10.617Z,1520539150.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:11.002Z,1520539151.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:11.017Z,1520539151.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:11.396Z,1520539151.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:11.423Z,1520539151.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:11.779Z,1520539151.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:11.806Z,1520539151.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:12.179Z,1520539152.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:12.205Z,1520539152.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:12.575Z,1520539152.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:12.608Z,1520539152.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:12.983Z,1520539152.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:13.011Z,1520539153.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:13.379Z,1520539153.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:13.405Z,1520539153.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:13.807Z,1520539153.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:13.822Z,1520539153.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:14.198Z,1520539154.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:14.213Z,1520539154.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:14.598Z,1520539154.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:14.613Z,1520539154.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:14.975Z,1520539154.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:15.012Z,1520539155.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:15.383Z,1520539155.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:15.410Z,1520539155.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:15.779Z,1520539155.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:15.815Z,1520539155.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:16.184Z,1520539156.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:16.216Z,1520539156.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:16.602Z,1520539156.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:16.617Z,1520539156.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:17.001Z,1520539157.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:17.017Z,1520539157.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:17.399Z,1520539157.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:17.426Z,1520539157.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:17.783Z,1520539157.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:17.810Z,1520539157.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:18.179Z,1520539158.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:18.211Z,1520539158.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:18.583Z,1520539158.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:18.616Z,1520539158.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:18.983Z,1520539158.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:19.014Z,1520539159.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:19.389Z,1520539159.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:19.416Z,1520539159.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:19.802Z,1520539159.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:19.818Z,1520539159.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:20.201Z,1520539160.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:20.217Z,1520539160.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:20.579Z,1520539160.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:20.615Z,1520539160.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:20.983Z,1520539160.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:21.018Z,1520539161.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:21.387Z,1520539161.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:21.420Z,1520539161.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:21.797Z,1520539161.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:21.827Z,1520539161.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:22.196Z,1520539162.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:22.219Z,1520539162.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:22.594Z,1520539162.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:22.626Z,1520539162.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:22.986Z,1520539162.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:23.020Z,1520539163.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:26.083Z,1520539166.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:26.162Z,1520539166.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:26.234Z,1520539166.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:26.275Z,1520539166.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:26.629Z,1520539166.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:26.654Z,1520539166.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:27.033Z,1520539167.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:27.048Z,1520539167.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:27.432Z,1520539167.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:27.448Z,1520539167.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:27.819Z,1520539167.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:27.838Z,1520539167.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:28.220Z,1520539168.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:28.235Z,1520539168.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:28.624Z,1520539168.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:28.643Z,1520539168.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:29.019Z,1520539169.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:29.038Z,1520539169.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:29.430Z,1520539169.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:29.446Z,1520539169.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:29.832Z,1520539169.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:29.852Z,1520539169.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:30.229Z,1520539170.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:30.244Z,1520539170.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:30.620Z,1520539170.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:30.635Z,1520539170.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:31.019Z,1520539171.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:31.038Z,1520539171.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:31.434Z,1520539171.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:31.453Z,1520539171.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:31.833Z,1520539171.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:31.847Z,1520539171.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:32.233Z,1520539172.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:32.248Z,1520539172.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:32.623Z,1520539172.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:32.639Z,1520539172.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:33.007Z,1520539173.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:33.046Z,1520539173.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:33.434Z,1520539173.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:33.449Z,1520539173.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:33.832Z,1520539173.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:33.847Z,1520539173.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:34.233Z,1520539174.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:34.252Z,1520539174.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:34.624Z,1520539174.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:34.643Z,1520539174.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:35.023Z,1520539175.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:35.042Z,1520539175.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:35.430Z,1520539175.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:35.450Z,1520539175.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:35.832Z,1520539175.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:35.855Z,1520539175.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:36.234Z,1520539176.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:36.254Z,1520539176.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:36.625Z,1520539176.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:36.651Z,1520539176.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:37.022Z,1520539177.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:37.042Z,1520539177.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:37.433Z,1520539177.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:37.451Z,1520539177.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:37.833Z,1520539177.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:37.853Z,1520539177.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:38.234Z,1520539178.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:38.254Z,1520539178.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:38.624Z,1520539178.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:38.640Z,1520539178.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:39.024Z,1520539179.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:39.039Z,1520539179.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:39.434Z,1520539179.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:39.454Z,1520539179.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:39.833Z,1520539179.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:39.851Z,1520539179.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:40.234Z,1520539180.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:40.250Z,1520539180.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:40.623Z,1520539180.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:40.649Z,1520539180.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:41.023Z,1520539181.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:41.050Z,1520539181.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:41.435Z,1520539181.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:41.450Z,1520539181.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:41.836Z,1520539181.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:41.851Z,1520539181.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:42.241Z,1520539182.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:42.287Z,1520539182.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:42.625Z,1520539182.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:42.663Z,1520539182.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:43.010Z,1520539183.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:43.046Z,1520539183.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:43.432Z,1520539183.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:43.456Z,1520539183.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:43.841Z,1520539183.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:43.902Z,1520539183.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:44.221Z,1520539184.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:44.253Z,1520539184.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:44.612Z,1520539184.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:44.639Z,1520539184.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:45.037Z,1520539185.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:45.067Z,1520539185.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:45.426Z,1520539185.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:45.472Z,1520539185.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:45.827Z,1520539185.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:45.865Z,1520539185.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:46.223Z,1520539186.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:46.284Z,1520539186.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:46.611Z,1520539186.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:46.627Z,1520539186.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:47.018Z,1520539187.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:47.060Z,1520539187.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:47.430Z,1520539187.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:47.464Z,1520539187.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:47.817Z,1520539187.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:47.859Z,1520539187.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:48.225Z,1520539188.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:48.253Z,1520539188.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:48.612Z,1520539188.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:48.627Z,1520539188.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:49.011Z,1520539189.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:49.027Z,1520539189.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:49.429Z,1520539189.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:49.466Z,1520539189.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:49.829Z,1520539189.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:49.844Z,1520539189.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:50.233Z,1520539190.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:50.266Z,1520539190.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:50.623Z,1520539190.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:50.642Z,1520539190.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:51.022Z,1520539191.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:51.037Z,1520539191.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:51.428Z,1520539191.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:51.444Z,1520539191.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:51.828Z,1520539191.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:51.856Z,1520539191.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:52.233Z,1520539192.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:52.253Z,1520539192.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:52.624Z,1520539192.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:52.640Z,1520539192.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:53.015Z,1520539193.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:53.037Z,1520539193.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:53.433Z,1520539193.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:53.452Z,1520539193.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:53.821Z,1520539193.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:53.852Z,1520539193.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:54.233Z,1520539194.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:54.255Z,1520539194.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:54.624Z,1520539194.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:54.639Z,1520539194.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:55.008Z,1520539195.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:55.042Z,1520539195.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:55.433Z,1520539195.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:55.453Z,1520539195.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:55.836Z,1520539195.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:55.851Z,1520539195.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:56.230Z,1520539196.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:56.245Z,1520539196.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:56.624Z,1520539196.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:56.639Z,1520539196.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:57.011Z,1520539197.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:57.041Z,1520539197.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:57.422Z,1520539197.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:57.446Z,1520539197.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:57.833Z,1520539197.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:57.855Z,1520539197.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:58.237Z,1520539198.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:58.258Z,1520539198.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:58.609Z,1520539198.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:58.637Z,1520539198.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:59.010Z,1520539199.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:59.043Z,1520539199.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:59.433Z,1520539199.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:59.450Z,1520539199.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T19:59:59.823Z,1520539199.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T19:59:59.852Z,1520539199.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:00.230Z,1520539200.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:00.250Z,1520539200.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:00.628Z,1520539200.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:00.643Z,1520539200.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:01.008Z,1520539201.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:01.042Z,1520539201.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:01.429Z,1520539201.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:01.445Z,1520539201.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:01.833Z,1520539201.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:01.853Z,1520539201.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:02.234Z,1520539202.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:02.255Z,1520539202.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:02.611Z,1520539202.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:02.637Z,1520539202.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:03.010Z,1520539203.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:03.044Z,1520539203.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:03.425Z,1520539203.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:03.446Z,1520539203.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:03.844Z,1520539203.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:03.859Z,1520539203.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:04.230Z,1520539204.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:04.245Z,1520539204.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:04.615Z,1520539204.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:04.642Z,1520539204.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:05.015Z,1520539205.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:05.047Z,1520539205.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:05.430Z,1520539205.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:05.446Z,1520539205.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:05.829Z,1520539205.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:05.847Z,1520539205.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:06.225Z,1520539206.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:06.250Z,1520539206.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:06.611Z,1520539206.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:06.649Z,1520539206.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:07.005Z,1520539207.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:07.029Z,1520539207.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:07.421Z,1520539207.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:07.457Z,1520539207.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:07.838Z,1520539207.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:07.858Z,1520539207.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:08.233Z,1520539208.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:08.253Z,1520539208.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:08.611Z,1520539208.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:08.639Z,1520539208.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:09.014Z,1520539209.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:09.057Z,1520539209.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:09.388Z,1520539209.388 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T20:00:09.388Z,1520539209.388 [NAL9602] Data Fault, FailCount= 3
2018-03-08T20:00:09.388Z,1520539209.388 [NAL9602](ERROR): Data Fault
2018-03-08T20:00:09.405Z,1520539209.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:09.421Z,1520539209.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:09.450Z,1520539209.450 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T20:00:09.803Z,1520539209.803 [NAL9602](INFO): Powering down
2018-03-08T20:00:09.820Z,1520539209.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:09.862Z,1520539209.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:10.214Z,1520539210.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:10.229Z,1520539210.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:10.611Z,1520539210.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:10.627Z,1520539210.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:10.639Z,1520539210.639 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T20:00:10.640Z,1520539210.640 [NAL9602] No Fault, FailCount= 3
2018-03-08T20:00:11.022Z,1520539211.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:11.059Z,1520539211.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:11.415Z,1520539211.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:11.430Z,1520539211.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:11.815Z,1520539211.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:11.831Z,1520539211.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:12.222Z,1520539212.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:12.242Z,1520539212.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:12.635Z,1520539212.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:12.709Z,1520539212.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:13.013Z,1520539213.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:13.028Z,1520539213.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:13.414Z,1520539213.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:13.440Z,1520539213.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:13.810Z,1520539213.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:13.848Z,1520539213.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:14.214Z,1520539214.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:14.255Z,1520539214.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:14.618Z,1520539214.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:14.654Z,1520539214.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:15.014Z,1520539215.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:15.047Z,1520539215.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:15.411Z,1520539215.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:15.503Z,1520539215.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:15.810Z,1520539215.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:15.859Z,1520539215.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:16.214Z,1520539216.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:16.254Z,1520539216.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:16.611Z,1520539216.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:16.643Z,1520539216.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:17.014Z,1520539217.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:17.051Z,1520539217.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:17.410Z,1520539217.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:17.425Z,1520539217.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:17.808Z,1520539217.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:17.823Z,1520539217.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:18.218Z,1520539218.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:18.255Z,1520539218.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:18.618Z,1520539218.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:18.634Z,1520539218.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:19.016Z,1520539219.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:19.031Z,1520539219.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:19.415Z,1520539219.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:19.446Z,1520539219.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:19.819Z,1520539219.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:19.834Z,1520539219.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:20.220Z,1520539220.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:20.235Z,1520539220.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:20.620Z,1520539220.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:20.635Z,1520539220.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:21.042Z,1520539221.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:21.064Z,1520539221.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:21.415Z,1520539221.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:21.446Z,1520539221.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:21.818Z,1520539221.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:21.833Z,1520539221.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:22.218Z,1520539222.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:22.233Z,1520539222.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:22.618Z,1520539222.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:22.633Z,1520539222.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:23.020Z,1520539223.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:23.035Z,1520539223.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:26.116Z,1520539226.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:26.131Z,1520539226.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:26.220Z,1520539226.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:26.266Z,1520539226.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:26.583Z,1520539226.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:26.616Z,1520539226.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:26.986Z,1520539226.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:27.026Z,1520539227.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:27.379Z,1520539227.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:27.394Z,1520539227.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:27.784Z,1520539227.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:27.798Z,1520539227.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:28.187Z,1520539228.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:28.203Z,1520539228.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:28.572Z,1520539228.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:28.600Z,1520539228.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:28.984Z,1520539228.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:28.999Z,1520539228.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:29.382Z,1520539229.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:29.402Z,1520539229.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:29.780Z,1520539229.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:29.795Z,1520539229.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:30.184Z,1520539230.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:30.206Z,1520539230.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:30.586Z,1520539230.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:30.602Z,1520539230.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:30.985Z,1520539230.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:30.000Z,1520539231.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:31.387Z,1520539231.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:31.402Z,1520539231.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:31.788Z,1520539231.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:31.803Z,1520539231.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:32.189Z,1520539232.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:32.244Z,1520539232.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:32.584Z,1520539232.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:32.611Z,1520539232.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:32.988Z,1520539232.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:33.003Z,1520539233.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:33.384Z,1520539233.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:33.399Z,1520539233.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:33.788Z,1520539233.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:33.803Z,1520539233.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:34.188Z,1520539234.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:34.203Z,1520539234.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:34.580Z,1520539234.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:34.595Z,1520539234.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:34.986Z,1520539234.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:35.002Z,1520539235.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:35.386Z,1520539235.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:35.401Z,1520539235.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:35.783Z,1520539235.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:35.799Z,1520539235.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:36.188Z,1520539236.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:36.202Z,1520539236.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:36.588Z,1520539236.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:36.603Z,1520539236.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:36.979Z,1520539236.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:36.998Z,1520539236.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:37.388Z,1520539237.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:37.402Z,1520539237.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:37.787Z,1520539237.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:37.802Z,1520539237.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:38.190Z,1520539238.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:38.237Z,1520539238.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:38.587Z,1520539238.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:38.601Z,1520539238.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:38.987Z,1520539238.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:39.002Z,1520539239.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:39.384Z,1520539239.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:39.399Z,1520539239.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:39.788Z,1520539239.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:39.803Z,1520539239.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:40.171Z,1520539240.171 [NAL9602](INFO): Powering up NAL9602
2018-03-08T20:00:40.189Z,1520539240.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:40.204Z,1520539240.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:40.585Z,1520539240.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:40.601Z,1520539240.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:40.986Z,1520539240.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:41.001Z,1520539241.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:41.391Z,1520539241.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:41.406Z,1520539241.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:41.784Z,1520539241.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:41.800Z,1520539241.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:42.191Z,1520539242.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:42.206Z,1520539242.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:42.592Z,1520539242.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:42.614Z,1520539242.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:42.979Z,1520539242.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:42.999Z,1520539242.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:43.384Z,1520539243.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:43.418Z,1520539243.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:43.790Z,1520539243.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:43.806Z,1520539243.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:44.191Z,1520539244.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:44.206Z,1520539244.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:44.587Z,1520539244.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:44.607Z,1520539244.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:44.990Z,1520539244.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:45.010Z,1520539245.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:45.375Z,1520539245.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:45.411Z,1520539245.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:45.774Z,1520539245.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:45.800Z,1520539245.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:46.182Z,1520539246.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:46.213Z,1520539246.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:46.576Z,1520539246.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:46.607Z,1520539246.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:46.978Z,1520539246.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:47.010Z,1520539247.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:47.383Z,1520539247.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:47.411Z,1520539247.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:47.779Z,1520539247.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:47.814Z,1520539247.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:48.183Z,1520539248.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:48.214Z,1520539248.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:48.583Z,1520539248.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:48.620Z,1520539248.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:48.978Z,1520539248.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:49.006Z,1520539249.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:49.382Z,1520539249.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:49.421Z,1520539249.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:49.783Z,1520539249.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:49.819Z,1520539249.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:50.183Z,1520539250.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:50.215Z,1520539250.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:50.582Z,1520539250.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:50.598Z,1520539250.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:50.994Z,1520539250.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:51.021Z,1520539251.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:51.362Z,1520539251.362 [NAL9602](INFO): NAL9602 initialized
2018-03-08T20:00:51.379Z,1520539251.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:51.395Z,1520539251.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:51.787Z,1520539251.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:51.823Z,1520539251.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:52.194Z,1520539252.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:52.227Z,1520539252.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:52.601Z,1520539252.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:52.631Z,1520539252.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:52.990Z,1520539252.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:53.005Z,1520539253.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:53.388Z,1520539253.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:53.404Z,1520539253.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:53.789Z,1520539253.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:53.804Z,1520539253.804 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:53.804Z,1520539253.804 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 245
2018-03-08T20:00:53.804Z,1520539253.804 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T20:00:53.806Z,1520539253.806 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:53.806Z,1520539253.806 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 245
2018-03-08T20:00:53.806Z,1520539253.806 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T20:00:53.808Z,1520539253.808 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:53.808Z,1520539253.808 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 245
2018-03-08T20:00:53.808Z,1520539253.808 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T20:00:53.840Z,1520539253.840 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T20:00:53.840Z,1520539253.840 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T20:00:53.849Z,1520539253.849 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T20:00:54.186Z,1520539254.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:54.233Z,1520539254.233 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T20:00:54.233Z,1520539254.233 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 245
2018-03-08T20:00:54.233Z,1520539254.233 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T20:00:54.234Z,1520539254.234 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 245
2018-03-08T20:00:54.234Z,1520539254.234 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T20:00:54.234Z,1520539254.234 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 245
2018-03-08T20:00:54.586Z,1520539254.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:54.606Z,1520539254.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T20:00:54.607Z,1520539254.607 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:00:54.607Z,1520539254.607 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:00:54.607Z,1520539254.607 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T20:00:54.608Z,1520539254.608 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:00:54.608Z,1520539254.608 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:00:54.609Z,1520539254.609 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T20:00:54.609Z,1520539254.609 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:00:54.609Z,1520539254.609 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:00:54.996Z,1520539254.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:55.020Z,1520539255.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T20:00:55.025Z,1520539255.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:55.405Z,1520539255.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:55.419Z,1520539255.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T20:00:55.420Z,1520539255.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:55.802Z,1520539255.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:55.817Z,1520539255.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T20:00:55.818Z,1520539255.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:56.179Z,1520539256.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:56.218Z,1520539256.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T20:00:56.219Z,1520539256.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:56.582Z,1520539256.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:56.617Z,1520539256.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T20:00:56.618Z,1520539256.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:56.993Z,1520539256.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:57.022Z,1520539257.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T20:00:57.023Z,1520539257.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:57.393Z,1520539257.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:57.428Z,1520539257.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T20:00:57.429Z,1520539257.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:57.808Z,1520539257.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:57.822Z,1520539257.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T20:00:57.823Z,1520539257.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:58.180Z,1520539258.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:58.196Z,1520539258.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T20:00:58.209Z,1520539258.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:58.583Z,1520539258.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:58.598Z,1520539258.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T20:00:58.599Z,1520539258.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:58.997Z,1520539258.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:59.023Z,1520539259.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T20:00:59.024Z,1520539259.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:59.401Z,1520539259.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:59.428Z,1520539259.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T20:00:59.429Z,1520539259.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:00:59.798Z,1520539259.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:00:59.822Z,1520539259.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T20:00:59.823Z,1520539259.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:00.185Z,1520539260.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:00.222Z,1520539260.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T20:01:00.223Z,1520539260.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:00.587Z,1520539260.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:00.603Z,1520539260.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T20:01:00.604Z,1520539260.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:00.985Z,1520539260.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:01.002Z,1520539261.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T20:01:01.003Z,1520539261.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:01.398Z,1520539261.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:01.429Z,1520539261.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T20:01:01.430Z,1520539261.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:01.797Z,1520539261.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:01.821Z,1520539261.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T20:01:01.822Z,1520539261.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:02.182Z,1520539262.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:02.201Z,1520539262.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T20:01:02.202Z,1520539262.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:02.587Z,1520539262.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:02.606Z,1520539262.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T20:01:02.607Z,1520539262.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:02.998Z,1520539262.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:03.014Z,1520539263.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T20:01:03.015Z,1520539263.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:03.396Z,1520539263.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:03.411Z,1520539263.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T20:01:03.412Z,1520539263.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:03.798Z,1520539263.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:03.812Z,1520539263.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T20:01:03.813Z,1520539263.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:04.175Z,1520539264.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:04.203Z,1520539264.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T20:01:04.204Z,1520539264.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:04.575Z,1520539264.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:04.601Z,1520539264.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T20:01:04.602Z,1520539264.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:04.996Z,1520539264.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:05.011Z,1520539265.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T20:01:05.013Z,1520539265.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:05.401Z,1520539265.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:05.415Z,1520539265.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T20:01:05.416Z,1520539265.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:05.802Z,1520539265.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:05.817Z,1520539265.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T20:01:05.818Z,1520539265.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:06.192Z,1520539266.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:06.207Z,1520539266.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T20:01:06.208Z,1520539266.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:06.578Z,1520539266.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:06.612Z,1520539266.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T20:01:06.613Z,1520539266.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:07.002Z,1520539267.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:07.017Z,1520539267.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T20:01:07.017Z,1520539267.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:07.404Z,1520539267.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:07.419Z,1520539267.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T20:01:07.420Z,1520539267.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:07.795Z,1520539267.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:07.822Z,1520539267.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T20:01:07.823Z,1520539267.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:08.184Z,1520539268.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:08.210Z,1520539268.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T20:01:08.211Z,1520539268.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:08.578Z,1520539268.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:08.605Z,1520539268.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T20:01:08.606Z,1520539268.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:08.996Z,1520539268.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:09.019Z,1520539269.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T20:01:09.020Z,1520539269.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:09.402Z,1520539269.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:09.417Z,1520539269.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T20:01:09.418Z,1520539269.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:09.801Z,1520539269.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:09.816Z,1520539269.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T20:01:09.817Z,1520539269.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:10.175Z,1520539270.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:10.207Z,1520539270.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T20:01:10.208Z,1520539270.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:10.580Z,1520539270.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:10.613Z,1520539270.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T20:01:10.614Z,1520539270.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:10.996Z,1520539270.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:11.019Z,1520539271.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T20:01:11.020Z,1520539271.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:11.405Z,1520539271.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:11.419Z,1520539271.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T20:01:11.420Z,1520539271.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:11.794Z,1520539271.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:11.809Z,1520539271.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T20:01:11.810Z,1520539271.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:12.179Z,1520539272.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:12.210Z,1520539272.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T20:01:12.211Z,1520539272.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:12.575Z,1520539272.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:12.608Z,1520539272.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T20:01:12.609Z,1520539272.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:13.001Z,1520539273.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:13.022Z,1520539273.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T20:01:13.023Z,1520539273.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:13.401Z,1520539273.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:13.416Z,1520539273.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T20:01:13.417Z,1520539273.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:13.792Z,1520539273.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:13.823Z,1520539273.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:14.184Z,1520539274.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:14.210Z,1520539274.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:14.578Z,1520539274.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:14.605Z,1520539274.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:14.996Z,1520539274.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:15.019Z,1520539275.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:15.405Z,1520539275.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:15.426Z,1520539275.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:15.801Z,1520539275.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:15.817Z,1520539275.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:16.180Z,1520539276.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:16.214Z,1520539276.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:16.583Z,1520539276.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:16.609Z,1520539276.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:16.998Z,1520539276.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:17.013Z,1520539277.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:17.398Z,1520539277.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:17.413Z,1520539277.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:17.793Z,1520539277.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:17.809Z,1520539277.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:18.180Z,1520539278.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:18.219Z,1520539278.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:18.576Z,1520539278.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:18.611Z,1520539278.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:19.002Z,1520539279.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:19.017Z,1520539279.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:19.409Z,1520539279.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:19.425Z,1520539279.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:19.799Z,1520539279.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:19.814Z,1520539279.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:20.185Z,1520539280.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:20.211Z,1520539280.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:20.578Z,1520539280.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:20.610Z,1520539280.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:20.997Z,1520539280.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:21.017Z,1520539281.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:21.405Z,1520539281.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:21.421Z,1520539281.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:21.797Z,1520539281.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:21.813Z,1520539281.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:22.179Z,1520539282.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:22.215Z,1520539282.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:22.579Z,1520539282.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:22.611Z,1520539282.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:23.002Z,1520539283.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:23.017Z,1520539283.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:23.397Z,1520539283.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:23.423Z,1520539283.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:26.500Z,1520539286.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:26.522Z,1520539286.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:26.613Z,1520539286.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:26.662Z,1520539286.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:26.979Z,1520539286.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:27.010Z,1520539287.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:27.387Z,1520539287.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:27.413Z,1520539287.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:27.782Z,1520539287.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:27.805Z,1520539287.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:28.201Z,1520539288.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:28.216Z,1520539288.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:28.599Z,1520539288.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:28.615Z,1520539288.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:28.992Z,1520539288.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:29.014Z,1520539289.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:29.383Z,1520539289.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:29.408Z,1520539289.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:29.780Z,1520539289.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:29.809Z,1520539289.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:30.177Z,1520539290.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:30.201Z,1520539290.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:30.574Z,1520539290.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:30.591Z,1520539290.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:30.994Z,1520539290.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:31.021Z,1520539291.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:31.394Z,1520539291.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:31.419Z,1520539291.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:31.789Z,1520539291.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:31.815Z,1520539291.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:32.178Z,1520539292.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:32.193Z,1520539292.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:32.578Z,1520539292.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:32.599Z,1520539292.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:32.985Z,1520539292.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:33.001Z,1520539293.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:33.393Z,1520539293.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:33.429Z,1520539293.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:33.781Z,1520539293.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:33.796Z,1520539293.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:34.178Z,1520539294.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:34.202Z,1520539294.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:34.584Z,1520539294.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:34.600Z,1520539294.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:34.985Z,1520539294.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:35.001Z,1520539295.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:35.389Z,1520539295.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:35.405Z,1520539295.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:35.785Z,1520539295.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:35.801Z,1520539295.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:36.175Z,1520539296.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:36.211Z,1520539296.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:36.585Z,1520539296.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:36.601Z,1520539296.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:36.986Z,1520539296.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:37.013Z,1520539297.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:37.393Z,1520539297.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:37.421Z,1520539297.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:37.795Z,1520539297.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:37.818Z,1520539297.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:38.175Z,1520539298.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:38.215Z,1520539298.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:38.571Z,1520539298.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:38.606Z,1520539298.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:38.994Z,1520539298.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:39.014Z,1520539299.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:39.395Z,1520539299.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:39.411Z,1520539299.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:39.781Z,1520539299.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:39.819Z,1520539299.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:40.175Z,1520539300.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:40.207Z,1520539300.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:40.570Z,1520539300.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:40.608Z,1520539300.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:40.981Z,1520539300.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:41.008Z,1520539301.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:41.394Z,1520539301.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:41.420Z,1520539301.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:41.784Z,1520539301.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:41.810Z,1520539301.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:42.180Z,1520539302.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:42.207Z,1520539302.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:42.571Z,1520539302.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:42.619Z,1520539302.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:42.985Z,1520539302.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:43.006Z,1520539303.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:43.400Z,1520539303.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:43.427Z,1520539303.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:43.791Z,1520539303.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:43.827Z,1520539303.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:44.181Z,1520539304.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:44.232Z,1520539304.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:44.576Z,1520539304.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:44.591Z,1520539304.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:44.997Z,1520539304.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:45.020Z,1520539305.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:45.385Z,1520539305.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:45.400Z,1520539305.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:45.784Z,1520539305.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:45.800Z,1520539305.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:46.201Z,1520539306.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:46.233Z,1520539306.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:46.580Z,1520539306.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:46.595Z,1520539306.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:46.989Z,1520539306.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:47.004Z,1520539307.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:47.388Z,1520539307.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:47.403Z,1520539307.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:47.789Z,1520539307.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:47.804Z,1520539307.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:48.176Z,1520539308.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:48.199Z,1520539308.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:48.579Z,1520539308.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:48.594Z,1520539308.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:48.989Z,1520539308.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:49.005Z,1520539309.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:49.389Z,1520539309.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:49.405Z,1520539309.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:49.789Z,1520539309.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:49.810Z,1520539309.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:50.185Z,1520539310.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:50.207Z,1520539310.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:50.583Z,1520539310.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:50.603Z,1520539310.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:50.990Z,1520539310.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:51.006Z,1520539311.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:51.393Z,1520539311.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:51.408Z,1520539311.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:51.793Z,1520539311.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:51.814Z,1520539311.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:52.184Z,1520539312.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:52.200Z,1520539312.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:52.571Z,1520539312.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:52.607Z,1520539312.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:52.994Z,1520539312.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:53.014Z,1520539313.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:53.396Z,1520539313.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:53.411Z,1520539313.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:53.795Z,1520539313.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:53.810Z,1520539313.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:54.171Z,1520539314.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:54.207Z,1520539314.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:54.584Z,1520539314.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:54.599Z,1520539314.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:54.987Z,1520539314.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:55.009Z,1520539315.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:55.396Z,1520539315.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:55.411Z,1520539315.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:55.793Z,1520539315.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:55.814Z,1520539315.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:56.185Z,1520539316.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:56.200Z,1520539316.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:56.583Z,1520539316.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:56.598Z,1520539316.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:56.990Z,1520539316.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:57.005Z,1520539317.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:57.394Z,1520539317.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:57.409Z,1520539317.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:57.794Z,1520539317.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:57.814Z,1520539317.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:58.171Z,1520539318.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:58.199Z,1520539318.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:58.571Z,1520539318.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:58.603Z,1520539318.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:58.993Z,1520539318.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:59.013Z,1520539319.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:59.026Z,1520539319.026 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T20:01:59.393Z,1520539319.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:59.412Z,1520539319.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:01:59.795Z,1520539319.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:01:59.810Z,1520539319.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:00.175Z,1520539320.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:00.207Z,1520539320.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:00.571Z,1520539320.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:00.608Z,1520539320.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:00.981Z,1520539320.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:01.009Z,1520539321.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:01.397Z,1520539321.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:01.413Z,1520539321.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:01.781Z,1520539321.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:01.815Z,1520539321.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:02.167Z,1520539322.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:02.210Z,1520539322.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:02.575Z,1520539322.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:02.608Z,1520539322.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:02.981Z,1520539322.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:03.014Z,1520539323.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:03.398Z,1520539323.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:03.413Z,1520539323.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:03.794Z,1520539323.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:03.814Z,1520539323.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:04.171Z,1520539324.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:04.199Z,1520539324.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:04.574Z,1520539324.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:04.616Z,1520539324.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:04.985Z,1520539324.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:05.012Z,1520539325.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:05.385Z,1520539325.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:05.423Z,1520539325.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:05.784Z,1520539325.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:05.816Z,1520539325.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:06.175Z,1520539326.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:06.191Z,1520539326.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:06.569Z,1520539326.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:06.590Z,1520539326.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:06.985Z,1520539326.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:07.000Z,1520539327.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:07.390Z,1520539327.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:07.421Z,1520539327.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:07.793Z,1520539327.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:07.823Z,1520539327.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:08.183Z,1520539328.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:08.198Z,1520539328.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:08.581Z,1520539328.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:08.597Z,1520539328.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:08.993Z,1520539328.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:09.024Z,1520539329.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:09.381Z,1520539329.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:09.396Z,1520539329.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:09.786Z,1520539329.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:09.801Z,1520539329.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:10.182Z,1520539330.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:10.198Z,1520539330.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:10.581Z,1520539330.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:10.596Z,1520539330.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:10.981Z,1520539330.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:10.997Z,1520539330.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:11.393Z,1520539331.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:11.428Z,1520539331.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:11.797Z,1520539331.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:11.840Z,1520539331.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:12.183Z,1520539332.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:12.198Z,1520539332.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:12.582Z,1520539332.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:12.630Z,1520539332.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:12.993Z,1520539332.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:13.008Z,1520539333.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:13.382Z,1520539333.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:13.397Z,1520539333.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:13.782Z,1520539333.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:13.817Z,1520539333.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:14.175Z,1520539334.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:14.209Z,1520539334.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:14.571Z,1520539334.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:14.603Z,1520539334.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:14.986Z,1520539334.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:15.018Z,1520539335.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:15.413Z,1520539335.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:15.428Z,1520539335.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:15.777Z,1520539335.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:15.806Z,1520539335.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:16.175Z,1520539336.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:16.191Z,1520539336.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:16.578Z,1520539336.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:16.593Z,1520539336.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:16.982Z,1520539336.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:17.006Z,1520539337.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:17.397Z,1520539337.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:17.423Z,1520539337.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:17.793Z,1520539337.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:17.818Z,1520539337.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:18.180Z,1520539338.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:18.195Z,1520539338.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:18.578Z,1520539338.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:18.593Z,1520539338.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:18.981Z,1520539338.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:19.003Z,1520539339.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:19.377Z,1520539339.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:19.393Z,1520539339.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:19.789Z,1520539339.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:19.804Z,1520539339.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:20.180Z,1520539340.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:20.202Z,1520539340.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:20.569Z,1520539340.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:20.592Z,1520539340.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:20.989Z,1520539340.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:21.004Z,1520539341.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:21.389Z,1520539341.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:21.403Z,1520539341.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:21.789Z,1520539341.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:21.805Z,1520539341.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:22.184Z,1520539342.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:22.199Z,1520539342.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:22.576Z,1520539342.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:22.591Z,1520539342.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:22.985Z,1520539342.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:23.001Z,1520539343.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:23.389Z,1520539343.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:23.404Z,1520539343.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:23.790Z,1520539343.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:23.804Z,1520539343.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:26.883Z,1520539346.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:26.899Z,1520539346.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:27.001Z,1520539347.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:27.039Z,1520539347.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:27.386Z,1520539347.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:27.401Z,1520539347.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:27.782Z,1520539347.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:27.797Z,1520539347.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:28.193Z,1520539348.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:28.215Z,1520539348.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:28.566Z,1520539348.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:28.594Z,1520539348.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:28.961Z,1520539348.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:28.992Z,1520539348.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:29.365Z,1520539349.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:29.398Z,1520539349.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:29.766Z,1520539349.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:29.798Z,1520539349.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:30.187Z,1520539350.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:30.203Z,1520539350.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:30.593Z,1520539350.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:30.615Z,1520539350.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:30.984Z,1520539350.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:31.006Z,1520539351.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:31.367Z,1520539351.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:31.395Z,1520539351.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:31.770Z,1520539351.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:31.797Z,1520539351.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:32.171Z,1520539352.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:32.198Z,1520539352.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:32.563Z,1520539352.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:32.602Z,1520539352.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:32.986Z,1520539352.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:33.002Z,1520539353.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:33.386Z,1520539353.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:33.401Z,1520539353.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:33.769Z,1520539353.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:33.808Z,1520539353.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:34.167Z,1520539354.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:34.199Z,1520539354.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:34.566Z,1520539354.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:34.599Z,1520539354.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:34.973Z,1520539354.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:35.009Z,1520539355.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:35.387Z,1520539355.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:35.403Z,1520539355.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:35.786Z,1520539355.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:35.806Z,1520539355.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:36.168Z,1520539356.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:36.200Z,1520539356.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:36.564Z,1520539356.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:36.579Z,1520539356.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:36.977Z,1520539356.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:37.003Z,1520539357.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:37.373Z,1520539357.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:37.396Z,1520539357.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:37.777Z,1520539357.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:37.808Z,1520539357.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:38.169Z,1520539358.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:38.216Z,1520539358.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:38.564Z,1520539358.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:38.579Z,1520539358.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:38.985Z,1520539358.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:39.009Z,1520539359.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:39.385Z,1520539359.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:39.411Z,1520539359.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:39.780Z,1520539359.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:39.811Z,1520539359.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:40.169Z,1520539360.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:40.186Z,1520539360.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:40.572Z,1520539360.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:40.587Z,1520539360.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:40.969Z,1520539360.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:40.985Z,1520539360.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:41.381Z,1520539361.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:41.396Z,1520539361.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:41.785Z,1520539361.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:41.800Z,1520539361.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:42.173Z,1520539362.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:42.189Z,1520539362.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:42.571Z,1520539362.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:42.586Z,1520539362.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:42.978Z,1520539362.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:42.993Z,1520539362.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:43.385Z,1520539363.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:43.400Z,1520539363.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:43.777Z,1520539363.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:43.793Z,1520539363.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:44.175Z,1520539364.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:44.199Z,1520539364.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:44.566Z,1520539364.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:44.582Z,1520539364.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:44.990Z,1520539364.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:45.023Z,1520539365.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:45.381Z,1520539365.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:45.396Z,1520539365.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:45.778Z,1520539365.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:45.798Z,1520539365.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:46.176Z,1520539366.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:46.191Z,1520539366.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:46.573Z,1520539366.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:46.595Z,1520539366.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:46.978Z,1520539366.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:46.994Z,1520539366.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:47.381Z,1520539367.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:47.396Z,1520539367.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:47.778Z,1520539367.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:47.793Z,1520539367.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:48.175Z,1520539368.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:48.191Z,1520539368.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:48.569Z,1520539368.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:48.597Z,1520539368.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:48.989Z,1520539368.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:49.004Z,1520539369.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:49.390Z,1520539369.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:49.405Z,1520539369.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:49.790Z,1520539369.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:49.805Z,1520539369.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:50.176Z,1520539370.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:50.200Z,1520539370.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:50.561Z,1520539370.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:50.594Z,1520539370.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:50.987Z,1520539370.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:51.002Z,1520539371.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:51.392Z,1520539371.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:51.414Z,1520539371.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:51.783Z,1520539371.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:51.799Z,1520539371.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:52.167Z,1520539372.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:52.194Z,1520539372.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:52.567Z,1520539372.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:52.603Z,1520539372.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:52.979Z,1520539372.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:52.995Z,1520539372.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:53.392Z,1520539373.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:53.415Z,1520539373.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:53.786Z,1520539373.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:53.806Z,1520539373.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:54.165Z,1520539374.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:54.193Z,1520539374.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:54.585Z,1520539374.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:54.600Z,1520539374.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:54.989Z,1520539374.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:55.010Z,1520539375.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:55.382Z,1520539375.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:55.398Z,1520539375.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:55.789Z,1520539375.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:55.811Z,1520539375.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:56.171Z,1520539376.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:56.199Z,1520539376.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:56.563Z,1520539376.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:56.595Z,1520539376.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:56.986Z,1520539376.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:57.001Z,1520539377.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:57.386Z,1520539377.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:57.401Z,1520539377.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:57.776Z,1520539377.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:57.811Z,1520539377.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:58.167Z,1520539378.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:58.204Z,1520539378.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:58.570Z,1520539378.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:58.602Z,1520539378.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:58.969Z,1520539378.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:58.996Z,1520539378.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:59.391Z,1520539379.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:59.406Z,1520539379.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:02:59.777Z,1520539379.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:02:59.804Z,1520539379.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:00.167Z,1520539380.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:00.199Z,1520539380.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:00.570Z,1520539380.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:00.604Z,1520539380.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:00.977Z,1520539380.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:01.002Z,1520539381.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:01.377Z,1520539381.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:01.403Z,1520539381.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:01.781Z,1520539381.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:01.810Z,1520539381.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:02.171Z,1520539382.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:02.208Z,1520539382.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:02.564Z,1520539382.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:02.583Z,1520539382.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:02.981Z,1520539382.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:03.010Z,1520539383.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:03.377Z,1520539383.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:03.407Z,1520539383.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:03.769Z,1520539383.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:03.801Z,1520539383.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:04.166Z,1520539384.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:04.203Z,1520539384.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:04.563Z,1520539384.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:04.578Z,1520539384.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:04.969Z,1520539384.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:04.985Z,1520539384.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:05.381Z,1520539385.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:05.414Z,1520539385.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:05.781Z,1520539385.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:05.810Z,1520539385.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:06.171Z,1520539386.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:06.188Z,1520539386.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:06.568Z,1520539386.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:06.583Z,1520539386.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:06.981Z,1520539386.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:07.014Z,1520539387.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:07.385Z,1520539387.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:07.411Z,1520539387.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:07.781Z,1520539387.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:07.816Z,1520539387.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:08.168Z,1520539388.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:08.191Z,1520539388.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:08.566Z,1520539388.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:08.581Z,1520539388.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:08.981Z,1520539388.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:09.013Z,1520539389.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:09.377Z,1520539389.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:09.398Z,1520539389.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:09.773Z,1520539389.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:09.789Z,1520539389.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:10.173Z,1520539390.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:10.189Z,1520539390.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:10.572Z,1520539390.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:10.588Z,1520539390.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:10.973Z,1520539390.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:10.989Z,1520539390.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:11.385Z,1520539391.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:11.400Z,1520539391.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:11.777Z,1520539391.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:11.793Z,1520539391.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:12.174Z,1520539392.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:12.190Z,1520539392.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:12.569Z,1520539392.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:12.589Z,1520539392.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:12.977Z,1520539392.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:12.993Z,1520539392.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:13.381Z,1520539393.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:13.396Z,1520539393.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:13.777Z,1520539393.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:13.793Z,1520539393.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:14.175Z,1520539394.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:14.191Z,1520539394.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:14.569Z,1520539394.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:14.585Z,1520539394.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:14.977Z,1520539394.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:14.993Z,1520539394.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:15.381Z,1520539395.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:15.396Z,1520539395.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:15.781Z,1520539395.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:15.796Z,1520539395.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:16.176Z,1520539396.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:16.191Z,1520539396.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:16.573Z,1520539396.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:16.588Z,1520539396.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:16.981Z,1520539396.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:16.996Z,1520539396.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:17.381Z,1520539397.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:17.396Z,1520539397.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:17.780Z,1520539397.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:17.796Z,1520539397.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:18.177Z,1520539398.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:18.193Z,1520539398.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:18.574Z,1520539398.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:18.589Z,1520539398.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:18.986Z,1520539398.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:19.002Z,1520539399.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:19.382Z,1520539399.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:19.397Z,1520539399.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:19.781Z,1520539399.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:19.796Z,1520539399.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:20.179Z,1520539400.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:20.195Z,1520539400.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:20.577Z,1520539400.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:20.592Z,1520539400.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:20.981Z,1520539400.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:20.996Z,1520539400.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:21.381Z,1520539401.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:21.397Z,1520539401.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:21.778Z,1520539401.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:21.809Z,1520539401.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:22.196Z,1520539402.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:22.227Z,1520539402.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:22.576Z,1520539402.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:22.592Z,1520539402.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:22.986Z,1520539402.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:23.001Z,1520539403.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:23.004Z,1520539403.004 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T20:03:23.005Z,1520539403.005 [Default:CheckIn:C.Wait] Stopped
2018-03-08T20:03:23.005Z,1520539403.005 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T20:03:23.005Z,1520539403.005 [Default:CheckIn:D] Running Loop=1
2018-03-08T20:03:23.390Z,1520539403.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:23.410Z,1520539403.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:23.414Z,1520539403.414 [Default:CheckIn:D] Stopped
2018-03-08T20:03:23.414Z,1520539403.414 [Default:CheckIn:E] Running Loop=1
2018-03-08T20:03:23.790Z,1520539403.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:23.806Z,1520539403.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:23.809Z,1520539403.809 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 737.643490 min 
2018-03-08T20:03:23.809Z,1520539403.809 [Default:CheckIn:E] Stopped
2018-03-08T20:03:23.809Z,1520539403.809 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T20:03:23.809Z,1520539403.809 [Default:CheckIn] Stopped
2018-03-08T20:03:23.809Z,1520539403.809 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T20:03:23.810Z,1520539403.810 [Default:CheckIn](INFO): Running loop #72
2018-03-08T20:03:23.810Z,1520539403.810 [Default:CheckIn] Running Loop=72
2018-03-08T20:03:23.810Z,1520539403.810 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T20:03:23.810Z,1520539403.810 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T20:03:24.186Z,1520539404.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:24.202Z,1520539404.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:27.264Z,1520539407.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:27.290Z,1520539407.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:27.424Z,1520539407.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:27.451Z,1520539407.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:27.765Z,1520539407.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:27.781Z,1520539407.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:28.161Z,1520539408.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:28.178Z,1520539408.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:28.536Z,1520539408.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:28.568Z,1520539408.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:28.952Z,1520539408.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:28.975Z,1520539408.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:29.353Z,1520539409.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:29.368Z,1520539409.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:29.737Z,1520539409.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:29.771Z,1520539409.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:30.165Z,1520539410.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:30.181Z,1520539410.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:30.562Z,1520539410.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:30.577Z,1520539410.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:30.953Z,1520539410.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:30.981Z,1520539410.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:31.343Z,1520539411.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:31.370Z,1520539411.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:31.735Z,1520539411.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:31.754Z,1520539411.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:32.144Z,1520539412.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:32.159Z,1520539412.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:32.555Z,1520539412.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:32.571Z,1520539412.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:32.941Z,1520539412.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:32.956Z,1520539412.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:33.353Z,1520539413.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:33.369Z,1520539413.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:33.757Z,1520539413.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:33.772Z,1520539413.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:34.153Z,1520539414.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:34.174Z,1520539414.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:34.541Z,1520539414.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:34.630Z,1520539414.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:34.941Z,1520539414.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:34.957Z,1520539414.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:35.341Z,1520539415.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:35.356Z,1520539415.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:35.739Z,1520539415.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:35.755Z,1520539415.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:36.153Z,1520539416.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:36.169Z,1520539416.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:36.553Z,1520539416.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:36.580Z,1520539416.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:36.949Z,1520539416.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:36.965Z,1520539416.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:37.350Z,1520539417.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:37.373Z,1520539417.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:37.741Z,1520539417.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:37.767Z,1520539417.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:38.142Z,1520539418.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:38.172Z,1520539418.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:38.552Z,1520539418.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:38.567Z,1520539418.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:38.952Z,1520539418.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:38.967Z,1520539418.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:39.353Z,1520539419.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:39.374Z,1520539419.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:39.758Z,1520539419.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:39.778Z,1520539419.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:40.157Z,1520539420.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:40.179Z,1520539420.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:40.542Z,1520539420.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:40.557Z,1520539420.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:40.945Z,1520539420.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:40.973Z,1520539420.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:41.352Z,1520539421.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:41.367Z,1520539421.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:41.748Z,1520539421.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:41.775Z,1520539421.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:42.180Z,1520539422.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:42.213Z,1520539422.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:42.567Z,1520539422.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:42.583Z,1520539422.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:42.952Z,1520539422.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:42.998Z,1520539422.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:43.340Z,1520539423.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:43.386Z,1520539423.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:43.739Z,1520539423.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:43.777Z,1520539423.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:44.143Z,1520539424.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:44.179Z,1520539424.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:44.541Z,1520539424.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:44.572Z,1520539424.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:44.944Z,1520539424.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:44.975Z,1520539424.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:45.356Z,1520539425.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:45.380Z,1520539425.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:45.757Z,1520539425.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:45.772Z,1520539425.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:46.157Z,1520539426.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:46.172Z,1520539426.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:46.540Z,1520539426.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:46.575Z,1520539426.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:46.951Z,1520539426.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:46.967Z,1520539426.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:47.354Z,1520539427.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:47.369Z,1520539427.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:47.745Z,1520539427.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:47.765Z,1520539427.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:48.154Z,1520539428.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:48.181Z,1520539428.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:48.559Z,1520539428.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:48.575Z,1520539428.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:48.953Z,1520539428.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:48.977Z,1520539428.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:49.343Z,1520539429.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:49.370Z,1520539429.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:49.743Z,1520539429.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:49.771Z,1520539429.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:50.137Z,1520539430.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:50.164Z,1520539430.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:50.540Z,1520539430.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:50.580Z,1520539430.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:50.943Z,1520539430.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:50.971Z,1520539430.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:51.362Z,1520539431.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:51.382Z,1520539431.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:51.762Z,1520539431.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:51.777Z,1520539431.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:52.159Z,1520539432.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:52.186Z,1520539432.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:52.533Z,1520539432.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:52.561Z,1520539432.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:52.939Z,1520539432.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:52.971Z,1520539432.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:53.336Z,1520539433.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:53.373Z,1520539433.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:53.733Z,1520539433.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:53.757Z,1520539433.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:54.162Z,1520539434.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:54.182Z,1520539434.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:54.566Z,1520539434.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:54.581Z,1520539434.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:54.950Z,1520539434.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:54.983Z,1520539434.983 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:54.983Z,1520539434.983 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 246
2018-03-08T20:03:54.983Z,1520539434.983 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T20:03:54.985Z,1520539434.985 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:54.985Z,1520539434.985 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 246
2018-03-08T20:03:54.985Z,1520539434.985 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T20:03:54.987Z,1520539434.987 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:54.987Z,1520539434.987 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 246
2018-03-08T20:03:54.987Z,1520539434.987 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T20:03:54.999Z,1520539434.999 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T20:03:54.999Z,1520539434.999 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T20:03:54.000Z,1520539435.000 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T20:03:55.339Z,1520539435.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:55.386Z,1520539435.386 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T20:03:55.386Z,1520539435.386 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 246
2018-03-08T20:03:55.386Z,1520539435.386 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T20:03:55.386Z,1520539435.386 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 246
2018-03-08T20:03:55.387Z,1520539435.387 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T20:03:55.387Z,1520539435.387 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 246
2018-03-08T20:03:55.739Z,1520539435.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:55.775Z,1520539435.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T20:03:55.775Z,1520539435.775 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:03:55.775Z,1520539435.775 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:03:55.776Z,1520539435.776 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T20:03:55.776Z,1520539435.776 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:03:55.776Z,1520539435.776 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:03:55.777Z,1520539435.777 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T20:03:55.777Z,1520539435.777 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:03:55.778Z,1520539435.778 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:03:56.140Z,1520539436.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:56.171Z,1520539436.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T20:03:56.172Z,1520539436.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:56.540Z,1520539436.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:56.578Z,1520539436.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T20:03:56.579Z,1520539436.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:56.939Z,1520539436.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:56.979Z,1520539436.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T20:03:56.980Z,1520539436.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:57.353Z,1520539437.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:57.380Z,1520539437.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T20:03:57.381Z,1520539437.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:57.769Z,1520539437.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:57.783Z,1520539437.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T20:03:57.784Z,1520539437.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:58.154Z,1520539438.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:58.187Z,1520539438.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T20:03:58.188Z,1520539438.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:58.537Z,1520539438.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:58.574Z,1520539438.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T20:03:58.575Z,1520539438.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:58.940Z,1520539438.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:58.955Z,1520539438.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T20:03:58.956Z,1520539438.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:59.344Z,1520539439.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:59.359Z,1520539439.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T20:03:59.360Z,1520539439.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:03:59.738Z,1520539439.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:03:59.758Z,1520539439.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T20:03:59.759Z,1520539439.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:00.157Z,1520539440.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:00.188Z,1520539440.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T20:04:00.193Z,1520539440.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:00.553Z,1520539440.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:00.568Z,1520539440.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T20:04:00.569Z,1520539440.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:00.951Z,1520539440.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:00.970Z,1520539440.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T20:04:00.971Z,1520539440.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:01.349Z,1520539441.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:01.364Z,1520539441.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T20:04:01.365Z,1520539441.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:01.749Z,1520539441.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:01.764Z,1520539441.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T20:04:01.765Z,1520539441.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:02.146Z,1520539442.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:02.174Z,1520539442.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T20:04:02.174Z,1520539442.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:02.547Z,1520539442.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:02.568Z,1520539442.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T20:04:02.569Z,1520539442.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:02.950Z,1520539442.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:02.965Z,1520539442.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T20:04:02.966Z,1520539442.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:03.359Z,1520539443.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:03.375Z,1520539443.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T20:04:03.376Z,1520539443.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:03.756Z,1520539443.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:03.783Z,1520539443.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T20:04:03.784Z,1520539443.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:04.162Z,1520539444.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:04.179Z,1520539444.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T20:04:04.180Z,1520539444.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:04.545Z,1520539444.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:04.574Z,1520539444.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T20:04:04.575Z,1520539444.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:04.951Z,1520539444.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:04.968Z,1520539444.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T20:04:04.969Z,1520539444.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:05.349Z,1520539445.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:05.364Z,1520539445.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T20:04:05.365Z,1520539445.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:05.745Z,1520539445.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:05.765Z,1520539445.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T20:04:05.766Z,1520539445.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:06.154Z,1520539446.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:06.175Z,1520539446.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T20:04:06.176Z,1520539446.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:06.562Z,1520539446.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:06.577Z,1520539446.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T20:04:06.578Z,1520539446.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:06.953Z,1520539446.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:06.977Z,1520539446.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T20:04:06.977Z,1520539446.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:07.343Z,1520539447.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:07.369Z,1520539447.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T20:04:07.370Z,1520539447.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:07.739Z,1520539447.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:07.776Z,1520539447.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T20:04:07.777Z,1520539447.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:08.143Z,1520539448.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:08.170Z,1520539448.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T20:04:08.171Z,1520539448.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:08.557Z,1520539448.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:08.572Z,1520539448.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T20:04:08.573Z,1520539448.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:08.940Z,1520539448.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:08.967Z,1520539448.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T20:04:08.968Z,1520539448.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:09.358Z,1520539449.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:09.373Z,1520539449.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T20:04:09.374Z,1520539449.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:09.762Z,1520539449.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:09.777Z,1520539449.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T20:04:09.778Z,1520539449.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:10.159Z,1520539450.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:10.174Z,1520539450.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T20:04:10.174Z,1520539450.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:10.540Z,1520539450.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:10.571Z,1520539450.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T20:04:10.572Z,1520539450.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:10.939Z,1520539450.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:10.978Z,1520539450.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T20:04:10.979Z,1520539450.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:11.343Z,1520539451.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:11.358Z,1520539451.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T20:04:11.359Z,1520539451.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:11.737Z,1520539451.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:11.755Z,1520539451.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T20:04:11.756Z,1520539451.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:12.153Z,1520539452.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:12.168Z,1520539452.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T20:04:12.169Z,1520539452.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:12.597Z,1520539452.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:12.637Z,1520539452.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T20:04:12.638Z,1520539452.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:12.946Z,1520539452.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:12.961Z,1520539452.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T20:04:12.962Z,1520539452.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:13.341Z,1520539453.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:13.355Z,1520539453.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T20:04:13.356Z,1520539453.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:13.739Z,1520539453.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:13.754Z,1520539453.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T20:04:13.755Z,1520539453.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:14.143Z,1520539454.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:14.162Z,1520539454.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T20:04:14.163Z,1520539454.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:14.544Z,1520539454.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:14.560Z,1520539454.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T20:04:14.561Z,1520539454.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:14.943Z,1520539454.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:14.958Z,1520539454.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T20:04:14.958Z,1520539454.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:15.374Z,1520539455.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:15.390Z,1520539455.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:15.753Z,1520539455.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:15.768Z,1520539455.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:16.153Z,1520539456.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:16.174Z,1520539456.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:16.540Z,1520539456.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:16.559Z,1520539456.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:16.939Z,1520539456.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:16.975Z,1520539456.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:17.345Z,1520539457.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:17.373Z,1520539457.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:17.737Z,1520539457.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:17.764Z,1520539457.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:18.150Z,1520539458.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:18.183Z,1520539458.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:18.577Z,1520539458.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:18.595Z,1520539458.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:18.950Z,1520539458.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:18.976Z,1520539458.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:19.347Z,1520539459.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:19.379Z,1520539459.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:19.739Z,1520539459.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:19.782Z,1520539459.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:20.143Z,1520539460.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:20.179Z,1520539460.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:20.544Z,1520539460.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:20.575Z,1520539460.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:20.943Z,1520539460.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:20.987Z,1520539460.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:21.353Z,1520539461.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:21.381Z,1520539461.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:21.771Z,1520539461.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:21.786Z,1520539461.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:22.156Z,1520539462.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:22.190Z,1520539462.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:22.534Z,1520539462.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:22.550Z,1520539462.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:22.947Z,1520539462.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:22.978Z,1520539462.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:23.348Z,1520539463.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:23.363Z,1520539463.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:23.735Z,1520539463.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:23.755Z,1520539463.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:24.158Z,1520539464.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:24.190Z,1520539464.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:24.557Z,1520539464.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:24.586Z,1520539464.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:27.653Z,1520539467.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:27.670Z,1520539467.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:27.773Z,1520539467.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:27.799Z,1520539467.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:28.152Z,1520539468.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:28.167Z,1520539468.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:28.549Z,1520539468.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:28.564Z,1520539468.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:28.951Z,1520539468.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:28.967Z,1520539468.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:29.357Z,1520539469.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:29.373Z,1520539469.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:29.757Z,1520539469.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:29.773Z,1520539469.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:30.153Z,1520539470.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:30.168Z,1520539470.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:30.545Z,1520539470.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:30.573Z,1520539470.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:30.952Z,1520539470.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:30.974Z,1520539470.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:31.352Z,1520539471.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:31.368Z,1520539471.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:31.753Z,1520539471.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:31.768Z,1520539471.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:32.156Z,1520539472.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:32.172Z,1520539472.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:32.557Z,1520539472.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:32.572Z,1520539472.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:32.958Z,1520539472.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:32.973Z,1520539472.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:33.351Z,1520539473.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:33.367Z,1520539473.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:33.752Z,1520539473.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:33.799Z,1520539473.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:34.145Z,1520539474.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:34.173Z,1520539474.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:34.543Z,1520539474.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:34.563Z,1520539474.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:34.948Z,1520539474.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:34.964Z,1520539474.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:35.361Z,1520539475.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:35.376Z,1520539475.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:35.758Z,1520539475.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:35.773Z,1520539475.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:36.154Z,1520539476.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:36.170Z,1520539476.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:36.553Z,1520539476.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:36.569Z,1520539476.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:36.950Z,1520539476.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:36.970Z,1520539476.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:37.350Z,1520539477.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:37.365Z,1520539477.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:37.751Z,1520539477.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:37.766Z,1520539477.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:38.154Z,1520539478.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:38.170Z,1520539478.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:38.556Z,1520539478.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:38.571Z,1520539478.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:38.955Z,1520539478.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:38.970Z,1520539478.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:39.352Z,1520539479.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:39.374Z,1520539479.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:39.752Z,1520539479.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:39.767Z,1520539479.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:40.149Z,1520539480.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:40.165Z,1520539480.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:40.552Z,1520539480.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:40.574Z,1520539480.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:40.948Z,1520539480.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:40.964Z,1520539480.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:41.354Z,1520539481.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:41.370Z,1520539481.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:41.757Z,1520539481.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:41.787Z,1520539481.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:42.161Z,1520539482.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:42.178Z,1520539482.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:42.540Z,1520539482.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:42.575Z,1520539482.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:42.943Z,1520539482.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:42.971Z,1520539482.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:43.341Z,1520539483.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:43.368Z,1520539483.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:43.739Z,1520539483.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:43.778Z,1520539483.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:44.150Z,1520539484.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:44.188Z,1520539484.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:44.565Z,1520539484.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:44.581Z,1520539484.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:44.962Z,1520539484.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:44.982Z,1520539484.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:45.339Z,1520539485.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:45.371Z,1520539485.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:45.743Z,1520539485.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:45.774Z,1520539485.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:46.143Z,1520539486.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:46.158Z,1520539486.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:46.545Z,1520539486.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:46.560Z,1520539486.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:46.946Z,1520539486.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:46.962Z,1520539486.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:47.353Z,1520539487.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:47.369Z,1520539487.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:47.757Z,1520539487.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:47.773Z,1520539487.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:48.153Z,1520539488.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:48.169Z,1520539488.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:48.549Z,1520539488.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:48.563Z,1520539488.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:48.951Z,1520539488.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:48.966Z,1520539488.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:49.348Z,1520539489.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:49.364Z,1520539489.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:49.751Z,1520539489.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:49.766Z,1520539489.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:50.154Z,1520539490.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:50.170Z,1520539490.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:50.557Z,1520539490.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:50.572Z,1520539490.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:50.954Z,1520539490.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:50.969Z,1520539490.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:51.351Z,1520539491.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:51.366Z,1520539491.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:51.751Z,1520539491.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:51.767Z,1520539491.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:52.148Z,1520539492.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:52.164Z,1520539492.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:52.549Z,1520539492.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:52.564Z,1520539492.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:52.951Z,1520539492.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:52.967Z,1520539492.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:53.353Z,1520539493.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:53.368Z,1520539493.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:53.757Z,1520539493.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:53.773Z,1520539493.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:54.153Z,1520539494.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:54.168Z,1520539494.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:54.545Z,1520539494.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:54.572Z,1520539494.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:54.953Z,1520539494.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:54.968Z,1520539494.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:55.348Z,1520539495.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:55.364Z,1520539495.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:55.749Z,1520539495.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:55.763Z,1520539495.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:56.156Z,1520539496.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:56.172Z,1520539496.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:56.556Z,1520539496.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:56.571Z,1520539496.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:56.958Z,1520539496.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:56.978Z,1520539496.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:57.352Z,1520539497.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:57.367Z,1520539497.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:57.749Z,1520539497.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:57.764Z,1520539497.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:58.145Z,1520539498.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:58.172Z,1520539498.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:58.548Z,1520539498.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:58.564Z,1520539498.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:58.947Z,1520539498.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:58.963Z,1520539498.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:59.361Z,1520539499.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:59.382Z,1520539499.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:04:59.761Z,1520539499.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:04:59.779Z,1520539499.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:00.161Z,1520539500.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:00.176Z,1520539500.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:00.553Z,1520539500.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:00.568Z,1520539500.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:00.949Z,1520539500.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:00.965Z,1520539500.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:01.336Z,1520539501.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:01.378Z,1520539501.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:01.743Z,1520539501.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:01.776Z,1520539501.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:02.162Z,1520539502.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:02.178Z,1520539502.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:02.570Z,1520539502.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:02.585Z,1520539502.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:02.963Z,1520539502.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:02.982Z,1520539502.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:03.343Z,1520539503.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:03.375Z,1520539503.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:03.739Z,1520539503.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:03.774Z,1520539503.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:04.143Z,1520539504.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:04.179Z,1520539504.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:04.545Z,1520539504.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:04.582Z,1520539504.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:04.943Z,1520539504.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:04.958Z,1520539504.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:05.352Z,1520539505.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:05.388Z,1520539505.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:05.753Z,1520539505.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:05.789Z,1520539505.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:06.157Z,1520539506.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:06.188Z,1520539506.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:06.549Z,1520539506.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:06.564Z,1520539506.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:06.949Z,1520539506.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:06.964Z,1520539506.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:07.345Z,1520539507.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:07.361Z,1520539507.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:07.746Z,1520539507.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:07.761Z,1520539507.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:08.157Z,1520539508.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:08.181Z,1520539508.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:08.561Z,1520539508.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:08.576Z,1520539508.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:08.957Z,1520539508.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:08.972Z,1520539508.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:09.352Z,1520539509.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:09.368Z,1520539509.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:09.750Z,1520539509.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:09.766Z,1520539509.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:10.149Z,1520539510.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:10.170Z,1520539510.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:10.548Z,1520539510.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:10.563Z,1520539510.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:10.948Z,1520539510.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:10.963Z,1520539510.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:11.354Z,1520539511.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:11.374Z,1520539511.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:11.757Z,1520539511.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:11.773Z,1520539511.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:12.153Z,1520539512.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:12.169Z,1520539512.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:12.549Z,1520539512.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:12.563Z,1520539512.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:12.947Z,1520539512.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:12.963Z,1520539512.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:13.351Z,1520539513.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:13.367Z,1520539513.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:13.752Z,1520539513.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:13.767Z,1520539513.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:14.154Z,1520539514.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:14.169Z,1520539514.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:14.553Z,1520539514.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:14.569Z,1520539514.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:14.955Z,1520539514.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:14.970Z,1520539514.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:15.352Z,1520539515.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:15.374Z,1520539515.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:15.751Z,1520539515.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:15.767Z,1520539515.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:16.155Z,1520539516.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:16.169Z,1520539516.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:16.544Z,1520539516.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:16.572Z,1520539516.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:16.953Z,1520539516.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:16.969Z,1520539516.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:17.362Z,1520539517.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:17.377Z,1520539517.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:17.754Z,1520539517.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:17.777Z,1520539517.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:18.162Z,1520539518.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:18.178Z,1520539518.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:18.553Z,1520539518.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:18.568Z,1520539518.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:18.938Z,1520539518.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:18.975Z,1520539518.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:19.344Z,1520539519.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:19.373Z,1520539519.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:19.740Z,1520539519.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:19.775Z,1520539519.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:20.163Z,1520539520.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:20.179Z,1520539520.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:20.566Z,1520539520.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:20.582Z,1520539520.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:20.968Z,1520539520.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:20.990Z,1520539520.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:21.343Z,1520539521.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:21.375Z,1520539521.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:21.755Z,1520539521.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:21.771Z,1520539521.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:22.139Z,1520539522.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:22.166Z,1520539522.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:22.537Z,1520539522.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:22.565Z,1520539522.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:22.939Z,1520539522.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:22.966Z,1520539522.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:23.362Z,1520539523.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:23.377Z,1520539523.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:23.753Z,1520539523.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:23.785Z,1520539523.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:24.161Z,1520539524.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:24.176Z,1520539524.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:24.543Z,1520539524.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:24.570Z,1520539524.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:24.935Z,1520539524.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:24.976Z,1520539524.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:28.056Z,1520539528.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:28.072Z,1520539528.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:28.174Z,1520539528.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:28.214Z,1520539528.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:28.539Z,1520539528.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:28.564Z,1520539528.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:28.937Z,1520539528.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:28.959Z,1520539528.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:29.338Z,1520539529.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:29.362Z,1520539529.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:29.723Z,1520539529.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:29.755Z,1520539529.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:30.128Z,1520539530.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:30.143Z,1520539530.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:30.524Z,1520539530.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:30.540Z,1520539530.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:30.928Z,1520539530.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:30.944Z,1520539530.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:31.341Z,1520539531.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:31.373Z,1520539531.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:31.728Z,1520539531.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:31.750Z,1520539531.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:32.142Z,1520539532.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:32.172Z,1520539532.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:32.527Z,1520539532.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:32.542Z,1520539532.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:32.922Z,1520539532.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:32.941Z,1520539532.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:33.327Z,1520539533.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:33.343Z,1520539533.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:33.728Z,1520539533.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:33.744Z,1520539533.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:34.142Z,1520539534.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:34.171Z,1520539534.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:34.534Z,1520539534.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:34.549Z,1520539534.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:34.942Z,1520539534.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:34.972Z,1520539534.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:35.324Z,1520539535.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:35.340Z,1520539535.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:35.728Z,1520539535.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:35.744Z,1520539535.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:36.129Z,1520539536.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:36.150Z,1520539536.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:36.522Z,1520539536.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:36.537Z,1520539536.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:36.928Z,1520539536.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:36.944Z,1520539536.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:37.334Z,1520539537.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:37.373Z,1520539537.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:37.728Z,1520539537.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:37.750Z,1520539537.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:38.142Z,1520539538.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:38.172Z,1520539538.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:38.526Z,1520539538.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:38.550Z,1520539538.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:38.919Z,1520539538.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:38.942Z,1520539538.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:39.326Z,1520539539.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:39.346Z,1520539539.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:39.726Z,1520539539.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:39.748Z,1520539539.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:40.134Z,1520539540.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:40.149Z,1520539540.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:40.538Z,1520539540.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:40.553Z,1520539540.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:40.938Z,1520539540.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:40.953Z,1520539540.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:41.330Z,1520539541.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:41.346Z,1520539541.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:41.726Z,1520539541.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:41.746Z,1520539541.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:42.130Z,1520539542.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:42.158Z,1520539542.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:42.529Z,1520539542.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:42.553Z,1520539542.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:42.933Z,1520539542.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:42.957Z,1520539542.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:43.344Z,1520539543.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:43.363Z,1520539543.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:43.742Z,1520539543.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:43.758Z,1520539543.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:44.130Z,1520539544.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:44.175Z,1520539544.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:44.531Z,1520539544.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:44.567Z,1520539544.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:44.921Z,1520539544.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:44.966Z,1520539544.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:45.327Z,1520539545.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:45.343Z,1520539545.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:45.726Z,1520539545.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:45.743Z,1520539545.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:46.132Z,1520539546.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:46.148Z,1520539546.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:46.534Z,1520539546.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:46.550Z,1520539546.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:46.934Z,1520539546.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:46.950Z,1520539546.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:47.323Z,1520539547.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:47.339Z,1520539547.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:47.732Z,1520539547.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:47.748Z,1520539547.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:48.128Z,1520539548.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:48.150Z,1520539548.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:48.531Z,1520539548.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:48.547Z,1520539548.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:48.928Z,1520539548.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:48.950Z,1520539548.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:49.338Z,1520539549.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:49.354Z,1520539549.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:49.739Z,1520539549.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:49.758Z,1520539549.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:50.134Z,1520539550.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:50.149Z,1520539550.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:50.525Z,1520539550.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:50.550Z,1520539550.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:50.931Z,1520539550.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:50.954Z,1520539550.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:51.329Z,1520539551.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:51.350Z,1520539551.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:51.734Z,1520539551.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:51.754Z,1520539551.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:52.138Z,1520539552.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:52.159Z,1520539552.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:52.538Z,1520539552.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:52.558Z,1520539552.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:52.944Z,1520539552.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:52.960Z,1520539552.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:53.332Z,1520539553.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:53.348Z,1520539553.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:53.725Z,1520539553.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:53.753Z,1520539553.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:54.133Z,1520539554.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:54.150Z,1520539554.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:54.520Z,1520539554.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:54.550Z,1520539554.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:54.919Z,1520539554.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:54.951Z,1520539554.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:55.347Z,1520539555.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:55.364Z,1520539555.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:55.747Z,1520539555.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:55.763Z,1520539555.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:56.139Z,1520539556.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:56.155Z,1520539556.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:56.515Z,1520539556.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:56.555Z,1520539556.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:56.915Z,1520539556.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:56.955Z,1520539556.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:57.323Z,1520539557.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:57.355Z,1520539557.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:57.722Z,1520539557.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:57.763Z,1520539557.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:58.129Z,1520539558.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:58.157Z,1520539558.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:58.534Z,1520539558.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:58.563Z,1520539558.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:58.932Z,1520539558.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:58.961Z,1520539558.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:59.319Z,1520539559.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:59.359Z,1520539559.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:05:59.722Z,1520539559.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:05:59.738Z,1520539559.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:00.127Z,1520539560.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:00.142Z,1520539560.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:00.520Z,1520539560.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:00.536Z,1520539560.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:00.926Z,1520539560.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:00.963Z,1520539560.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:01.338Z,1520539561.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:01.371Z,1520539561.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:01.742Z,1520539561.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:01.766Z,1520539561.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:02.138Z,1520539562.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:02.169Z,1520539562.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:02.527Z,1520539562.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:02.542Z,1520539562.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:02.928Z,1520539562.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:02.944Z,1520539562.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:03.328Z,1520539563.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:03.344Z,1520539563.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:03.727Z,1520539563.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:03.743Z,1520539563.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:04.138Z,1520539564.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:04.169Z,1520539564.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:04.534Z,1520539564.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:04.554Z,1520539564.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:04.929Z,1520539564.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:04.950Z,1520539564.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:05.324Z,1520539565.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:05.340Z,1520539565.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:05.728Z,1520539565.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:05.743Z,1520539565.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:06.127Z,1520539566.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:06.143Z,1520539566.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:06.528Z,1520539566.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:06.550Z,1520539566.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:06.935Z,1520539566.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:06.954Z,1520539566.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:07.332Z,1520539567.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:07.348Z,1520539567.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:07.746Z,1520539567.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:07.823Z,1520539567.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:08.134Z,1520539568.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:08.150Z,1520539568.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:08.530Z,1520539568.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:08.546Z,1520539568.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:08.927Z,1520539568.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:08.943Z,1520539568.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:09.323Z,1520539569.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:09.352Z,1520539569.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:09.728Z,1520539569.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:09.743Z,1520539569.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:10.137Z,1520539570.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:10.152Z,1520539570.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:10.537Z,1520539570.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:10.553Z,1520539570.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:10.937Z,1520539570.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:10.952Z,1520539570.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:11.331Z,1520539571.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:11.354Z,1520539571.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:11.719Z,1520539571.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:11.752Z,1520539571.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:12.120Z,1520539572.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:12.136Z,1520539572.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:12.547Z,1520539572.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:12.562Z,1520539572.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:12.927Z,1520539572.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:12.957Z,1520539572.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:13.341Z,1520539573.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:13.362Z,1520539573.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:13.734Z,1520539573.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:13.766Z,1520539573.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:14.145Z,1520539574.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:14.160Z,1520539574.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:14.524Z,1520539574.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:14.552Z,1520539574.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:14.927Z,1520539574.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:14.964Z,1520539574.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:15.324Z,1520539575.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:15.359Z,1520539575.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:15.726Z,1520539575.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:15.765Z,1520539575.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:16.138Z,1520539576.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:16.170Z,1520539576.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:16.537Z,1520539576.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:16.566Z,1520539576.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:16.937Z,1520539576.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:16.962Z,1520539576.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:17.327Z,1520539577.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:17.361Z,1520539577.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:17.725Z,1520539577.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:17.757Z,1520539577.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:18.127Z,1520539578.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:18.142Z,1520539578.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:18.521Z,1520539578.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:18.537Z,1520539578.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:18.926Z,1520539578.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:18.963Z,1520539578.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:19.338Z,1520539579.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:19.370Z,1520539579.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:19.738Z,1520539579.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:19.769Z,1520539579.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:20.138Z,1520539580.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:20.170Z,1520539580.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:20.527Z,1520539580.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:20.542Z,1520539580.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:20.924Z,1520539580.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:20.940Z,1520539580.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:21.325Z,1520539581.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:21.341Z,1520539581.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:21.727Z,1520539581.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:21.743Z,1520539581.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:22.129Z,1520539582.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:22.175Z,1520539582.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:22.542Z,1520539582.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:22.572Z,1520539582.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:22.941Z,1520539582.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:22.973Z,1520539582.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:23.324Z,1520539583.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:23.340Z,1520539583.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:23.726Z,1520539583.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:23.742Z,1520539583.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:24.129Z,1520539584.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:24.145Z,1520539584.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:24.525Z,1520539584.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:24.541Z,1520539584.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:24.925Z,1520539584.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:24.941Z,1520539584.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:25.341Z,1520539585.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:25.373Z,1520539585.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:28.450Z,1520539588.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:28.473Z,1520539588.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:28.586Z,1520539588.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:28.622Z,1520539588.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:28.927Z,1520539588.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:28.943Z,1520539588.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:29.330Z,1520539589.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:29.347Z,1520539589.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:29.737Z,1520539589.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:29.781Z,1520539589.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:30.130Z,1520539590.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:30.150Z,1520539590.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:30.530Z,1520539590.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:30.546Z,1520539590.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:30.932Z,1520539590.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:30.948Z,1520539590.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:31.329Z,1520539591.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:31.355Z,1520539591.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:31.716Z,1520539591.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:31.753Z,1520539591.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:32.122Z,1520539592.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:32.156Z,1520539592.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:32.549Z,1520539592.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:32.565Z,1520539592.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:32.914Z,1520539592.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:32.953Z,1520539592.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:33.344Z,1520539593.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:33.359Z,1520539593.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:33.743Z,1520539593.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:33.758Z,1520539593.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:34.137Z,1520539594.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:34.159Z,1520539594.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:34.519Z,1520539594.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:34.555Z,1520539594.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:34.922Z,1520539594.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:34.954Z,1520539594.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:35.323Z,1520539595.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:35.363Z,1520539595.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:35.723Z,1520539595.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:35.759Z,1520539595.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:36.134Z,1520539596.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:36.160Z,1520539596.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:36.537Z,1520539596.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:36.562Z,1520539596.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:36.938Z,1520539596.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:36.967Z,1520539596.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:37.326Z,1520539597.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:37.359Z,1520539597.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:37.727Z,1520539597.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:37.742Z,1520539597.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:38.119Z,1520539598.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:38.135Z,1520539598.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:38.527Z,1520539598.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:38.543Z,1520539598.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:38.927Z,1520539598.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:38.943Z,1520539598.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:39.334Z,1520539599.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:39.365Z,1520539599.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:39.737Z,1520539599.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:39.752Z,1520539599.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:40.141Z,1520539600.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:40.176Z,1520539600.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:40.528Z,1520539600.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:40.543Z,1520539600.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:40.926Z,1520539600.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:40.942Z,1520539600.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:41.323Z,1520539601.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:41.348Z,1520539601.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:41.728Z,1520539601.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:41.744Z,1520539601.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:42.129Z,1520539602.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:42.145Z,1520539602.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:42.541Z,1520539602.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:42.556Z,1520539602.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:42.942Z,1520539602.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:42.976Z,1520539602.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:43.328Z,1520539603.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:43.343Z,1520539603.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:43.728Z,1520539603.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:43.743Z,1520539603.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:44.127Z,1520539604.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:44.143Z,1520539604.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:44.529Z,1520539604.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:44.545Z,1520539604.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:44.927Z,1520539604.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:44.943Z,1520539604.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:45.342Z,1520539605.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:45.373Z,1520539605.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:45.739Z,1520539605.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:45.754Z,1520539605.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:46.133Z,1520539606.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:46.154Z,1520539606.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:46.531Z,1520539606.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:46.554Z,1520539606.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:46.930Z,1520539606.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:46.950Z,1520539606.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:47.332Z,1520539607.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:47.348Z,1520539607.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:47.731Z,1520539607.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:47.754Z,1520539607.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:48.136Z,1520539608.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:48.152Z,1520539608.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:48.538Z,1520539608.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:48.553Z,1520539608.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:48.937Z,1520539608.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:48.952Z,1520539608.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:49.327Z,1520539609.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:49.343Z,1520539609.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:49.731Z,1520539609.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:49.747Z,1520539609.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:50.131Z,1520539610.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:50.150Z,1520539610.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:50.533Z,1520539610.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:50.548Z,1520539610.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:50.931Z,1520539610.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:50.947Z,1520539610.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:51.337Z,1520539611.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:51.352Z,1520539611.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:51.738Z,1520539611.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:51.753Z,1520539611.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:52.137Z,1520539612.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:52.152Z,1520539612.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:52.531Z,1520539612.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:52.551Z,1520539612.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:52.931Z,1520539612.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:52.951Z,1520539612.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:53.333Z,1520539613.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:53.348Z,1520539613.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:53.739Z,1520539613.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:53.759Z,1520539613.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:54.142Z,1520539614.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:54.157Z,1520539614.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:54.538Z,1520539614.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:54.553Z,1520539614.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:54.942Z,1520539614.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:54.963Z,1520539614.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:55.323Z,1520539615.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:55.359Z,1520539615.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:55.722Z,1520539615.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:55.751Z,1520539615.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:56.123Z,1520539616.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:56.154Z,1520539616.154 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:56.155Z,1520539616.155 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 247
2018-03-08T20:06:56.155Z,1520539616.155 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T20:06:56.157Z,1520539616.157 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:56.157Z,1520539616.157 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 247
2018-03-08T20:06:56.157Z,1520539616.157 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T20:06:56.159Z,1520539616.159 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:56.159Z,1520539616.159 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 247
2018-03-08T20:06:56.159Z,1520539616.159 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T20:06:56.171Z,1520539616.171 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T20:06:56.171Z,1520539616.171 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T20:06:56.171Z,1520539616.171 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T20:06:56.519Z,1520539616.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:56.565Z,1520539616.565 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T20:06:56.565Z,1520539616.565 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 247
2018-03-08T20:06:56.566Z,1520539616.566 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T20:06:56.566Z,1520539616.566 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 247
2018-03-08T20:06:56.566Z,1520539616.566 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T20:06:56.566Z,1520539616.566 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 247
2018-03-08T20:06:56.915Z,1520539616.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:56.951Z,1520539616.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T20:06:56.952Z,1520539616.952 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:06:56.952Z,1520539616.952 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:06:56.953Z,1520539616.953 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T20:06:56.953Z,1520539616.953 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:06:56.953Z,1520539616.953 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:06:56.954Z,1520539616.954 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T20:06:56.954Z,1520539616.954 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:06:56.954Z,1520539616.954 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:06:57.345Z,1520539617.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:57.360Z,1520539617.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T20:06:57.361Z,1520539617.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:57.742Z,1520539617.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:57.757Z,1520539617.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T20:06:57.758Z,1520539617.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:58.142Z,1520539618.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:58.157Z,1520539618.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T20:06:58.158Z,1520539618.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:58.523Z,1520539618.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:58.549Z,1520539618.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T20:06:58.550Z,1520539618.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:58.918Z,1520539618.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:58.954Z,1520539618.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T20:06:58.955Z,1520539618.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:59.319Z,1520539619.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:59.359Z,1520539619.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T20:06:59.360Z,1520539619.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:06:59.723Z,1520539619.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:06:59.758Z,1520539619.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T20:06:59.759Z,1520539619.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:00.134Z,1520539620.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:00.162Z,1520539620.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T20:07:00.163Z,1520539620.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:00.543Z,1520539620.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:00.557Z,1520539620.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T20:07:00.558Z,1520539620.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:00.934Z,1520539620.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:00.962Z,1520539620.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T20:07:00.963Z,1520539620.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:01.326Z,1520539621.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:01.357Z,1520539621.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T20:07:01.358Z,1520539621.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:01.727Z,1520539621.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:01.757Z,1520539621.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T20:07:01.758Z,1520539621.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:02.123Z,1520539622.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:02.159Z,1520539622.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T20:07:02.160Z,1520539622.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:02.527Z,1520539622.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:02.556Z,1520539622.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T20:07:02.558Z,1520539622.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:02.925Z,1520539622.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:02.956Z,1520539622.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T20:07:02.957Z,1520539622.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:03.344Z,1520539623.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:03.359Z,1520539623.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T20:07:03.360Z,1520539623.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:03.752Z,1520539623.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:03.774Z,1520539623.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T20:07:03.775Z,1520539623.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:04.143Z,1520539624.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:04.159Z,1520539624.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T20:07:04.160Z,1520539624.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:04.520Z,1520539624.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:04.535Z,1520539624.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T20:07:04.553Z,1520539624.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:04.923Z,1520539624.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:04.939Z,1520539624.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T20:07:04.940Z,1520539624.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:05.325Z,1520539625.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:05.340Z,1520539625.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T20:07:05.341Z,1520539625.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:05.721Z,1520539625.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:05.736Z,1520539625.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T20:07:05.737Z,1520539625.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:06.138Z,1520539626.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:06.174Z,1520539626.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T20:07:06.174Z,1520539626.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:06.541Z,1520539626.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:06.574Z,1520539626.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T20:07:06.575Z,1520539626.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:06.927Z,1520539626.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:06.942Z,1520539626.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T20:07:06.943Z,1520539626.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:07.329Z,1520539627.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:07.345Z,1520539627.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T20:07:07.346Z,1520539627.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:07.721Z,1520539627.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:07.749Z,1520539627.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T20:07:07.750Z,1520539627.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:08.115Z,1520539628.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:08.150Z,1520539628.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T20:07:08.151Z,1520539628.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:08.521Z,1520539628.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:08.554Z,1520539628.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T20:07:08.555Z,1520539628.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:08.915Z,1520539628.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:08.951Z,1520539628.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T20:07:08.952Z,1520539628.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:09.343Z,1520539629.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:09.362Z,1520539629.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T20:07:09.363Z,1520539629.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:09.747Z,1520539629.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:09.770Z,1520539629.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T20:07:09.771Z,1520539629.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:10.143Z,1520539630.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:10.159Z,1520539630.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T20:07:10.160Z,1520539630.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:10.515Z,1520539630.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:10.554Z,1520539630.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T20:07:10.555Z,1520539630.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:10.923Z,1520539630.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:10.951Z,1520539630.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T20:07:10.951Z,1520539630.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:11.319Z,1520539631.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:11.356Z,1520539631.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T20:07:11.358Z,1520539631.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:11.717Z,1520539631.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:11.754Z,1520539631.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T20:07:11.755Z,1520539631.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:12.141Z,1520539632.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:12.161Z,1520539632.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T20:07:12.162Z,1520539632.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:12.547Z,1520539632.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:12.562Z,1520539632.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T20:07:12.563Z,1520539632.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:12.930Z,1520539632.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:12.966Z,1520539632.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T20:07:12.967Z,1520539632.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:13.320Z,1520539633.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:13.356Z,1520539633.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T20:07:13.358Z,1520539633.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:13.723Z,1520539633.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:13.757Z,1520539633.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T20:07:13.758Z,1520539633.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:14.127Z,1520539634.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:14.157Z,1520539634.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T20:07:14.158Z,1520539634.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:14.527Z,1520539634.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:14.558Z,1520539634.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T20:07:14.559Z,1520539634.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:14.922Z,1520539634.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:14.959Z,1520539634.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T20:07:14.960Z,1520539634.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:15.344Z,1520539635.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:15.362Z,1520539635.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T20:07:15.363Z,1520539635.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:15.748Z,1520539635.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:15.770Z,1520539635.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T20:07:15.771Z,1520539635.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:16.143Z,1520539636.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:16.158Z,1520539636.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:16.520Z,1520539636.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:16.544Z,1520539636.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:16.928Z,1520539636.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:16.943Z,1520539636.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:17.324Z,1520539637.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:17.340Z,1520539637.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:17.715Z,1520539637.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:17.743Z,1520539637.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:18.134Z,1520539638.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:18.149Z,1520539638.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:18.534Z,1520539638.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:18.549Z,1520539638.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:18.932Z,1520539638.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:18.955Z,1520539638.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:19.331Z,1520539639.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:19.347Z,1520539639.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:19.727Z,1520539639.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:19.743Z,1520539639.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:20.130Z,1520539640.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:20.146Z,1520539640.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:20.531Z,1520539640.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:20.547Z,1520539640.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:20.930Z,1520539640.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:20.946Z,1520539640.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:21.332Z,1520539641.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:21.348Z,1520539641.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:21.734Z,1520539641.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:21.749Z,1520539641.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:22.133Z,1520539642.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:22.148Z,1520539642.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:22.517Z,1520539642.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:22.541Z,1520539642.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:22.930Z,1520539642.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:22.950Z,1520539642.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:23.334Z,1520539643.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:23.349Z,1520539643.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:23.724Z,1520539643.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:23.740Z,1520539643.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:24.137Z,1520539644.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:24.152Z,1520539644.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:24.537Z,1520539644.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:24.552Z,1520539644.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:24.937Z,1520539644.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:24.952Z,1520539644.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:25.331Z,1520539645.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:25.354Z,1520539645.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:25.731Z,1520539645.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:25.747Z,1520539645.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:28.833Z,1520539648.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:28.849Z,1520539648.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:28.949Z,1520539648.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:28.986Z,1520539648.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:29.338Z,1520539649.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:29.353Z,1520539649.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:29.737Z,1520539649.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:29.752Z,1520539649.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:30.150Z,1520539650.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:30.184Z,1520539650.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:30.534Z,1520539650.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:30.549Z,1520539650.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:30.929Z,1520539650.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:30.945Z,1520539650.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:31.331Z,1520539651.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:31.346Z,1520539651.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:31.733Z,1520539651.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:31.748Z,1520539651.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:32.142Z,1520539652.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:32.158Z,1520539652.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:32.542Z,1520539652.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:32.557Z,1520539652.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:32.937Z,1520539652.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:32.952Z,1520539652.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:33.335Z,1520539653.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:33.350Z,1520539653.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:33.731Z,1520539653.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:33.754Z,1520539653.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:34.134Z,1520539654.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:34.149Z,1520539654.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:34.530Z,1520539654.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:34.545Z,1520539654.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:34.927Z,1520539654.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:34.950Z,1520539654.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:35.336Z,1520539655.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:35.351Z,1520539655.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:35.737Z,1520539655.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:35.753Z,1520539655.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:36.138Z,1520539656.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:36.153Z,1520539656.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:36.534Z,1520539656.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:36.548Z,1520539656.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:36.928Z,1520539656.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:36.945Z,1520539656.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:37.331Z,1520539657.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:37.347Z,1520539657.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:37.735Z,1520539657.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:37.750Z,1520539657.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:38.137Z,1520539658.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:38.153Z,1520539658.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:38.542Z,1520539658.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:38.557Z,1520539658.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:38.937Z,1520539658.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:38.952Z,1520539658.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:39.335Z,1520539659.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:39.350Z,1520539659.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:39.732Z,1520539659.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:39.748Z,1520539659.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:40.134Z,1520539660.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:40.149Z,1520539660.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:40.531Z,1520539660.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:40.547Z,1520539660.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:40.936Z,1520539660.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:40.951Z,1520539660.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:41.336Z,1520539661.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:41.352Z,1520539661.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:41.749Z,1520539661.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:41.786Z,1520539661.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:42.152Z,1520539662.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:42.167Z,1520539662.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:42.525Z,1520539662.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:42.577Z,1520539662.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:42.924Z,1520539662.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:42.968Z,1520539662.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:43.329Z,1520539663.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:43.373Z,1520539663.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:43.730Z,1520539663.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:43.746Z,1520539663.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:44.141Z,1520539664.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:44.173Z,1520539664.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:44.553Z,1520539664.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:44.601Z,1520539664.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:44.942Z,1520539664.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:44.977Z,1520539664.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:45.332Z,1520539665.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:45.377Z,1520539665.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:45.733Z,1520539665.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:45.748Z,1520539665.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:46.131Z,1520539666.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:46.154Z,1520539666.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:46.530Z,1520539666.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:46.546Z,1520539666.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:46.927Z,1520539666.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:46.943Z,1520539666.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:47.338Z,1520539667.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:47.358Z,1520539667.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:47.738Z,1520539667.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:47.754Z,1520539667.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:48.138Z,1520539668.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:48.158Z,1520539668.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:48.544Z,1520539668.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:48.561Z,1520539668.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:48.928Z,1520539668.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:48.944Z,1520539668.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:49.321Z,1520539669.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:49.353Z,1520539669.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:49.729Z,1520539669.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:49.751Z,1520539669.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:50.146Z,1520539670.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:50.167Z,1520539670.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:50.545Z,1520539670.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:50.560Z,1520539670.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:50.945Z,1520539670.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:50.966Z,1520539670.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:51.320Z,1520539671.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:51.352Z,1520539671.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:51.727Z,1520539671.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:51.758Z,1520539671.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:52.136Z,1520539672.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:52.151Z,1520539672.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:52.521Z,1520539672.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:52.552Z,1520539672.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:52.927Z,1520539672.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:52.958Z,1520539672.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:53.343Z,1520539673.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:53.358Z,1520539673.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:53.744Z,1520539673.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:53.759Z,1520539673.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:54.147Z,1520539674.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:54.163Z,1520539674.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:54.527Z,1520539674.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:54.562Z,1520539674.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:54.917Z,1520539674.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:54.947Z,1520539674.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:55.326Z,1520539675.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:55.354Z,1520539675.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:55.722Z,1520539675.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:55.746Z,1520539675.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:56.148Z,1520539676.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:56.164Z,1520539676.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:56.551Z,1520539676.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:56.566Z,1520539676.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:56.933Z,1520539676.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:56.967Z,1520539676.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:57.327Z,1520539677.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:57.363Z,1520539677.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:57.727Z,1520539677.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:57.763Z,1520539677.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:58.126Z,1520539678.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:58.167Z,1520539678.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:58.517Z,1520539678.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:58.533Z,1520539678.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:58.922Z,1520539678.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:58.939Z,1520539678.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:59.341Z,1520539679.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:59.366Z,1520539679.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:07:59.729Z,1520539679.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:07:59.745Z,1520539679.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:00.142Z,1520539680.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:00.167Z,1520539680.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:00.535Z,1520539680.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:00.572Z,1520539680.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:00.924Z,1520539680.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:00.940Z,1520539680.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:01.331Z,1520539681.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:01.347Z,1520539681.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:01.728Z,1520539681.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:01.743Z,1520539681.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:02.141Z,1520539682.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:02.175Z,1520539682.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:02.563Z,1520539682.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:02.579Z,1520539682.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:02.941Z,1520539682.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:02.974Z,1520539682.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:03.331Z,1520539683.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:03.347Z,1520539683.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:03.723Z,1520539683.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:03.755Z,1520539683.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:04.127Z,1520539684.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:04.166Z,1520539684.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:04.523Z,1520539684.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:04.539Z,1520539684.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:04.927Z,1520539684.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:04.967Z,1520539684.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:05.368Z,1520539685.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:05.412Z,1520539685.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:05.737Z,1520539685.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:05.769Z,1520539685.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:06.142Z,1520539686.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:06.174Z,1520539686.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:06.541Z,1520539686.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:06.556Z,1520539686.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:06.925Z,1520539686.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:06.941Z,1520539686.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:07.331Z,1520539687.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:07.351Z,1520539687.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:07.731Z,1520539687.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:07.754Z,1520539687.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:08.137Z,1520539688.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:08.153Z,1520539688.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:08.542Z,1520539688.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:08.557Z,1520539688.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:08.938Z,1520539688.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:08.953Z,1520539688.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:09.323Z,1520539689.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:09.347Z,1520539689.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:09.726Z,1520539689.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:09.764Z,1520539689.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:10.123Z,1520539690.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:10.139Z,1520539690.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:10.522Z,1520539690.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:10.537Z,1520539690.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:10.928Z,1520539690.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:10.943Z,1520539690.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:11.342Z,1520539691.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:11.368Z,1520539691.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:11.737Z,1520539691.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:11.773Z,1520539691.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:12.142Z,1520539692.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:12.173Z,1520539692.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:12.528Z,1520539692.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:12.544Z,1520539692.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:12.923Z,1520539692.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:12.939Z,1520539692.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:13.327Z,1520539693.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:13.342Z,1520539693.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:13.727Z,1520539693.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:13.743Z,1520539693.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:14.141Z,1520539694.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:14.175Z,1520539694.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:14.549Z,1520539694.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:14.578Z,1520539694.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:14.942Z,1520539694.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:14.974Z,1520539694.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:15.331Z,1520539695.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:15.347Z,1520539695.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:15.725Z,1520539695.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:15.759Z,1520539695.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:16.135Z,1520539696.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:16.151Z,1520539696.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:16.536Z,1520539696.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:16.552Z,1520539696.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:16.931Z,1520539696.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:16.951Z,1520539696.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:17.342Z,1520539697.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:17.358Z,1520539697.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:17.741Z,1520539697.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:17.756Z,1520539697.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:18.141Z,1520539698.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:18.156Z,1520539698.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:18.531Z,1520539698.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:18.554Z,1520539698.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:18.927Z,1520539698.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:18.943Z,1520539698.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:19.327Z,1520539699.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:19.350Z,1520539699.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:19.727Z,1520539699.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:19.751Z,1520539699.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:20.141Z,1520539700.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:20.157Z,1520539700.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:20.542Z,1520539700.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:20.557Z,1520539700.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:20.941Z,1520539700.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:20.957Z,1520539700.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:21.337Z,1520539701.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:21.352Z,1520539701.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:21.732Z,1520539701.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:21.748Z,1520539701.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:22.145Z,1520539702.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:22.194Z,1520539702.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:22.548Z,1520539702.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:22.563Z,1520539702.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:22.937Z,1520539702.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:22.952Z,1520539702.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:23.340Z,1520539703.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:23.362Z,1520539703.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:23.741Z,1520539703.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:23.756Z,1520539703.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:24.143Z,1520539704.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:24.158Z,1520539704.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:24.161Z,1520539704.161 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T20:03:23.8Z
2018-03-08T20:08:24.161Z,1520539704.161 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T20:08:24.161Z,1520539704.161 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T20:08:24.527Z,1520539704.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:24.559Z,1520539704.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:25.016Z,1520539705.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:25.050Z,1520539705.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:25.340Z,1520539705.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:25.355Z,1520539705.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:28.601Z,1520539708.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:28.616Z,1520539708.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:28.725Z,1520539708.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:28.749Z,1520539708.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:29.088Z,1520539709.088 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0288.lzma
2018-03-08T20:08:29.121Z,1520539709.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:29.152Z,1520539709.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:29.521Z,1520539709.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:29.553Z,1520539709.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:29.875Z,1520539709.875 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0288.lzma.bak
2018-03-08T20:08:29.876Z,1520539709.876 [DataOverHttps](INFO): SBD MOMSN=7988734
2018-03-08T20:08:29.914Z,1520539709.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:29.930Z,1520539709.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:30.485Z,1520539710.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:30.510Z,1520539710.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:30.708Z,1520539710.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:30.723Z,1520539710.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:33.821Z,1520539713.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:33.836Z,1520539713.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:33.951Z,1520539713.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:33.968Z,1520539713.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:34.337Z,1520539714.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:34.360Z,1520539714.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:34.723Z,1520539714.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:34.738Z,1520539714.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:35.115Z,1520539715.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:35.131Z,1520539715.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:35.523Z,1520539715.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:35.539Z,1520539715.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:35.923Z,1520539715.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:35.938Z,1520539715.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:39.025Z,1520539719.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:39.041Z,1520539719.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:39.145Z,1520539719.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:39.177Z,1520539719.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:39.501Z,1520539719.501 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180308T074127/Express0289.lzma
2018-03-08T20:08:39.554Z,1520539719.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:39.570Z,1520539719.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:39.919Z,1520539719.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:39.943Z,1520539719.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:40.295Z,1520539720.295 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0289.lzma.bak
2018-03-08T20:08:40.296Z,1520539720.296 [DataOverHttps](INFO): SBD MOMSN=7988736
2018-03-08T20:08:40.333Z,1520539720.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:40.348Z,1520539720.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:40.898Z,1520539720.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:40.922Z,1520539720.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:40.925Z,1520539720.925 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T20:08:40.925Z,1520539720.925 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T20:08:40.925Z,1520539720.925 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T20:08:41.121Z,1520539721.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:41.137Z,1520539721.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:41.534Z,1520539721.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:41.549Z,1520539721.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:44.794Z,1520539724.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:44.810Z,1520539724.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:44.902Z,1520539724.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:44.945Z,1520539724.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:45.263Z,1520539725.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:45.279Z,1520539725.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:45.659Z,1520539725.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:45.690Z,1520539725.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:46.069Z,1520539726.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:46.084Z,1520539726.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:46.473Z,1520539726.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:46.488Z,1520539726.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:46.869Z,1520539726.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:46.884Z,1520539726.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:47.266Z,1520539727.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:47.281Z,1520539727.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:47.663Z,1520539727.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:47.682Z,1520539727.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:48.066Z,1520539728.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:48.082Z,1520539728.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:48.459Z,1520539728.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:48.479Z,1520539728.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:48.865Z,1520539728.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:48.886Z,1520539728.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:49.269Z,1520539729.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:49.284Z,1520539729.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:49.668Z,1520539729.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:49.690Z,1520539729.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:50.070Z,1520539730.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:50.085Z,1520539730.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:50.463Z,1520539730.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:50.479Z,1520539730.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:50.851Z,1520539730.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:50.882Z,1520539730.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:51.263Z,1520539731.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:51.279Z,1520539731.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:51.660Z,1520539731.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:51.760Z,1520539731.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:52.068Z,1520539732.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:52.083Z,1520539732.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:52.472Z,1520539732.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:52.487Z,1520539732.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:52.873Z,1520539732.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:52.888Z,1520539732.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:53.267Z,1520539733.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:53.283Z,1520539733.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:53.667Z,1520539733.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:53.682Z,1520539733.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:54.060Z,1520539734.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:54.082Z,1520539734.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:54.469Z,1520539734.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:54.485Z,1520539734.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:54.867Z,1520539734.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:54.882Z,1520539734.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:55.273Z,1520539735.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:55.288Z,1520539735.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:55.670Z,1520539735.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:55.686Z,1520539735.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:56.072Z,1520539736.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:56.087Z,1520539736.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:56.465Z,1520539736.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:56.480Z,1520539736.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:56.861Z,1520539736.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:56.882Z,1520539736.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:57.269Z,1520539737.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:57.284Z,1520539737.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:57.669Z,1520539737.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:57.684Z,1520539737.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:58.071Z,1520539738.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:58.086Z,1520539738.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:58.474Z,1520539738.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:58.494Z,1520539738.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:58.873Z,1520539738.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:58.888Z,1520539738.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:59.268Z,1520539739.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:59.283Z,1520539739.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:08:59.666Z,1520539739.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:08:59.686Z,1520539739.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:00.063Z,1520539740.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:00.079Z,1520539740.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:00.468Z,1520539740.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:00.484Z,1520539740.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:00.866Z,1520539740.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:00.890Z,1520539740.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:01.277Z,1520539741.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:01.293Z,1520539741.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:01.666Z,1520539741.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:01.690Z,1520539741.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:02.077Z,1520539742.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:02.093Z,1520539742.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:02.451Z,1520539742.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:02.485Z,1520539742.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:02.852Z,1520539742.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:02.887Z,1520539742.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:03.277Z,1520539743.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:03.292Z,1520539743.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:03.654Z,1520539743.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:03.683Z,1520539743.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:04.072Z,1520539744.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:04.095Z,1520539744.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:04.477Z,1520539744.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:04.493Z,1520539744.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:04.881Z,1520539744.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:04.902Z,1520539744.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:05.253Z,1520539745.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:05.286Z,1520539745.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:05.655Z,1520539745.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:05.691Z,1520539745.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:06.069Z,1520539746.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:06.084Z,1520539746.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:06.469Z,1520539746.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:06.484Z,1520539746.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:06.854Z,1520539746.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:06.890Z,1520539746.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:07.279Z,1520539747.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:07.294Z,1520539747.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:07.674Z,1520539747.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:07.689Z,1520539747.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:08.077Z,1520539748.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:08.093Z,1520539748.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:08.455Z,1520539748.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:08.487Z,1520539748.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:08.852Z,1520539748.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:08.887Z,1520539748.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:09.255Z,1520539749.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:09.287Z,1520539749.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:09.655Z,1520539749.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:09.683Z,1520539749.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:10.070Z,1520539750.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:10.101Z,1520539750.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:10.481Z,1520539750.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:10.496Z,1520539750.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:10.882Z,1520539750.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:10.897Z,1520539750.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:11.259Z,1520539751.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:11.285Z,1520539751.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:11.654Z,1520539751.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:11.681Z,1520539751.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:12.055Z,1520539752.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:12.089Z,1520539752.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:12.459Z,1520539752.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:12.486Z,1520539752.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:12.871Z,1520539752.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:12.886Z,1520539752.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:13.272Z,1520539753.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:13.298Z,1520539753.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:13.669Z,1520539753.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:13.687Z,1520539753.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:14.074Z,1520539754.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:14.089Z,1520539754.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:14.451Z,1520539754.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:14.483Z,1520539754.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:14.852Z,1520539754.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:14.880Z,1520539754.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:15.255Z,1520539755.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:15.290Z,1520539755.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:15.658Z,1520539755.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:15.687Z,1520539755.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:16.070Z,1520539756.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:16.085Z,1520539756.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:16.476Z,1520539756.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:16.492Z,1520539756.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:16.875Z,1520539756.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:16.919Z,1520539756.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:17.259Z,1520539757.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:17.275Z,1520539757.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:17.656Z,1520539757.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:17.675Z,1520539757.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:18.059Z,1520539758.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:18.074Z,1520539758.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:18.459Z,1520539758.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:18.482Z,1520539758.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:18.855Z,1520539758.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:18.875Z,1520539758.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:19.270Z,1520539759.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:19.285Z,1520539759.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:19.686Z,1520539759.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:19.709Z,1520539759.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:20.066Z,1520539760.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:20.087Z,1520539760.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:20.455Z,1520539760.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:20.494Z,1520539760.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:20.849Z,1520539760.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:20.873Z,1520539760.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:21.271Z,1520539761.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:21.301Z,1520539761.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:21.660Z,1520539761.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:21.676Z,1520539761.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:22.069Z,1520539762.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:22.097Z,1520539762.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:22.477Z,1520539762.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:22.508Z,1520539762.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:22.877Z,1520539762.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:22.908Z,1520539762.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:23.260Z,1520539763.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:23.275Z,1520539763.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:23.659Z,1520539763.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:23.684Z,1520539763.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:24.064Z,1520539764.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:24.080Z,1520539764.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:24.465Z,1520539764.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:24.486Z,1520539764.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:24.864Z,1520539764.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:24.879Z,1520539764.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:25.277Z,1520539765.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:25.313Z,1520539765.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:25.669Z,1520539765.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:25.690Z,1520539765.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:26.072Z,1520539766.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:26.087Z,1520539766.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:26.463Z,1520539766.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:26.484Z,1520539766.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:26.867Z,1520539766.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:26.886Z,1520539766.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:27.268Z,1520539767.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:27.283Z,1520539767.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:27.664Z,1520539767.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:27.680Z,1520539767.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:28.072Z,1520539768.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:28.087Z,1520539768.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:28.472Z,1520539768.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:28.494Z,1520539768.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:28.873Z,1520539768.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:28.889Z,1520539768.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:29.260Z,1520539769.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:29.275Z,1520539769.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:29.659Z,1520539769.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:29.681Z,1520539769.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:30.061Z,1520539770.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:30.083Z,1520539770.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:30.459Z,1520539770.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:30.482Z,1520539770.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:30.863Z,1520539770.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:30.891Z,1520539770.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:31.278Z,1520539771.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:31.298Z,1520539771.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:31.676Z,1520539771.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:31.691Z,1520539771.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:32.074Z,1520539772.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:32.094Z,1520539772.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:32.471Z,1520539772.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:32.494Z,1520539772.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:32.854Z,1520539772.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:32.881Z,1520539772.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:33.255Z,1520539773.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:33.287Z,1520539773.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:33.659Z,1520539773.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:33.697Z,1520539773.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:34.076Z,1520539774.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:34.100Z,1520539774.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:34.480Z,1520539774.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:34.516Z,1520539774.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:34.867Z,1520539774.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:34.902Z,1520539774.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:35.260Z,1520539775.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:35.287Z,1520539775.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:35.665Z,1520539775.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:35.680Z,1520539775.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:36.065Z,1520539776.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:36.081Z,1520539776.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:36.459Z,1520539776.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:36.475Z,1520539776.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:36.864Z,1520539776.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:36.887Z,1520539776.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:37.270Z,1520539777.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:37.285Z,1520539777.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:37.674Z,1520539777.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:37.689Z,1520539777.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:38.069Z,1520539778.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:38.087Z,1520539778.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:38.466Z,1520539778.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:38.482Z,1520539778.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:38.864Z,1520539778.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:38.879Z,1520539778.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:39.267Z,1520539779.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:39.283Z,1520539779.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:39.660Z,1520539779.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:39.675Z,1520539779.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:40.069Z,1520539780.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:40.085Z,1520539780.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:40.469Z,1520539780.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:40.485Z,1520539780.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:40.869Z,1520539780.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:40.886Z,1520539780.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:41.266Z,1520539781.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:41.282Z,1520539781.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:41.671Z,1520539781.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:41.714Z,1520539781.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:45.983Z,1520539785.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:46.019Z,1520539786.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:46.093Z,1520539786.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:46.135Z,1520539786.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:46.492Z,1520539786.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:46.522Z,1520539786.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:46.881Z,1520539786.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:46.896Z,1520539786.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:47.289Z,1520539787.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:47.321Z,1520539787.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:47.675Z,1520539787.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:47.691Z,1520539787.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:48.078Z,1520539788.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:48.093Z,1520539788.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:48.479Z,1520539788.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:48.495Z,1520539788.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:48.879Z,1520539788.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:48.894Z,1520539788.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:49.280Z,1520539789.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:49.302Z,1520539789.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:49.680Z,1520539789.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:49.703Z,1520539789.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:50.081Z,1520539790.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:50.096Z,1520539790.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:50.476Z,1520539790.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:50.491Z,1520539790.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:50.879Z,1520539790.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:50.894Z,1520539790.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:51.274Z,1520539791.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:51.301Z,1520539791.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:51.678Z,1520539791.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:51.693Z,1520539791.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:52.084Z,1520539792.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:52.100Z,1520539792.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:52.485Z,1520539792.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:52.500Z,1520539792.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:52.884Z,1520539792.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:52.899Z,1520539792.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:53.279Z,1520539793.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:53.294Z,1520539793.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:53.675Z,1520539793.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:53.690Z,1520539793.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:54.071Z,1520539794.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:54.086Z,1520539794.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:54.480Z,1520539794.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:54.495Z,1520539794.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:54.879Z,1520539794.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:54.894Z,1520539794.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:55.285Z,1520539795.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:55.300Z,1520539795.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:55.685Z,1520539795.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:55.701Z,1520539795.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:56.084Z,1520539796.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:56.106Z,1520539796.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:56.479Z,1520539796.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:56.495Z,1520539796.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:56.875Z,1520539796.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:56.894Z,1520539796.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:57.276Z,1520539797.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:57.295Z,1520539797.295 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:57.295Z,1520539797.295 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 248
2018-03-08T20:09:57.295Z,1520539797.295 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T20:09:57.297Z,1520539797.297 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:57.297Z,1520539797.297 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 248
2018-03-08T20:09:57.297Z,1520539797.297 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T20:09:57.299Z,1520539797.299 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:57.299Z,1520539797.299 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 248
2018-03-08T20:09:57.299Z,1520539797.299 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T20:09:57.311Z,1520539797.311 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T20:09:57.311Z,1520539797.311 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T20:09:57.311Z,1520539797.311 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T20:09:57.675Z,1520539797.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:57.704Z,1520539797.704 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T20:09:57.704Z,1520539797.704 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 248
2018-03-08T20:09:57.705Z,1520539797.705 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T20:09:57.705Z,1520539797.705 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 248
2018-03-08T20:09:57.705Z,1520539797.705 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T20:09:57.705Z,1520539797.705 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 248
2018-03-08T20:09:58.089Z,1520539798.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:58.103Z,1520539798.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T20:09:58.103Z,1520539798.103 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:09:58.104Z,1520539798.104 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:09:58.104Z,1520539798.104 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T20:09:58.105Z,1520539798.105 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:09:58.105Z,1520539798.105 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:09:58.105Z,1520539798.105 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T20:09:58.106Z,1520539798.106 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:09:58.106Z,1520539798.106 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:09:58.489Z,1520539798.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:58.504Z,1520539798.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T20:09:58.505Z,1520539798.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:58.884Z,1520539798.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:58.908Z,1520539798.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T20:09:58.909Z,1520539798.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:59.272Z,1520539799.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:59.299Z,1520539799.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T20:09:59.300Z,1520539799.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:09:59.667Z,1520539799.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:09:59.692Z,1520539799.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T20:09:59.693Z,1520539799.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:00.063Z,1520539800.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:00.099Z,1520539800.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T20:10:00.100Z,1520539800.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:00.472Z,1520539800.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:00.497Z,1520539800.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T20:10:00.498Z,1520539800.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:00.930Z,1520539800.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:00.963Z,1520539800.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-08T20:10:00.964Z,1520539800.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:01.291Z,1520539801.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:01.305Z,1520539801.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T20:10:01.306Z,1520539801.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:01.693Z,1520539801.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:01.708Z,1520539801.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T20:10:01.709Z,1520539801.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:02.077Z,1520539802.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:02.100Z,1520539802.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T20:10:02.105Z,1520539802.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:02.475Z,1520539802.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:02.489Z,1520539802.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T20:10:02.490Z,1520539802.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:02.914Z,1520539802.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:02.935Z,1520539802.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T20:10:02.935Z,1520539802.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:03.274Z,1520539803.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:03.310Z,1520539803.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T20:10:03.311Z,1520539803.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:03.674Z,1520539803.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:03.689Z,1520539803.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T20:10:03.690Z,1520539803.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:04.097Z,1520539804.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:04.126Z,1520539804.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T20:10:04.127Z,1520539804.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:04.481Z,1520539804.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:04.496Z,1520539804.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T20:10:04.497Z,1520539804.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:04.881Z,1520539804.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:04.896Z,1520539804.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T20:10:04.897Z,1520539804.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:05.275Z,1520539805.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:05.290Z,1520539805.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T20:10:05.291Z,1520539805.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:05.676Z,1520539805.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:05.691Z,1520539805.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T20:10:05.692Z,1520539805.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:06.076Z,1520539806.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:06.091Z,1520539806.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T20:10:06.092Z,1520539806.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:06.476Z,1520539806.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:06.491Z,1520539806.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T20:10:06.492Z,1520539806.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:06.900Z,1520539806.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:06.922Z,1520539806.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T20:10:06.923Z,1520539806.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:07.290Z,1520539807.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:07.305Z,1520539807.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T20:10:07.306Z,1520539807.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:07.694Z,1520539807.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:07.708Z,1520539807.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T20:10:07.709Z,1520539807.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:08.081Z,1520539808.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:08.104Z,1520539808.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T20:10:08.105Z,1520539808.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:08.466Z,1520539808.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:08.499Z,1520539808.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T20:10:08.500Z,1520539808.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:08.871Z,1520539808.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:08.902Z,1520539808.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T20:10:08.903Z,1520539808.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:09.267Z,1520539809.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:09.294Z,1520539809.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T20:10:09.295Z,1520539809.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:09.670Z,1520539809.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:09.702Z,1520539809.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T20:10:09.703Z,1520539809.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:10.089Z,1520539810.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:10.104Z,1520539810.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T20:10:10.106Z,1520539810.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:10.485Z,1520539810.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:10.507Z,1520539810.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T20:10:10.508Z,1520539810.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:10.891Z,1520539810.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:10.910Z,1520539810.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T20:10:10.911Z,1520539810.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:11.267Z,1520539811.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:11.302Z,1520539811.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T20:10:11.303Z,1520539811.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:11.666Z,1520539811.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:11.702Z,1520539811.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T20:10:11.703Z,1520539811.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:12.067Z,1520539812.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:12.104Z,1520539812.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T20:10:12.105Z,1520539812.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:12.472Z,1520539812.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:12.501Z,1520539812.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T20:10:12.502Z,1520539812.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:12.867Z,1520539812.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:12.899Z,1520539812.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T20:10:12.900Z,1520539812.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:13.281Z,1520539813.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:13.310Z,1520539813.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T20:10:13.310Z,1520539813.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:13.678Z,1520539813.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:13.714Z,1520539813.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T20:10:13.715Z,1520539813.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:14.082Z,1520539814.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:14.108Z,1520539814.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T20:10:14.109Z,1520539814.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:14.467Z,1520539814.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:14.482Z,1520539814.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T20:10:14.483Z,1520539814.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:14.864Z,1520539814.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:14.880Z,1520539814.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T20:10:14.881Z,1520539814.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:15.275Z,1520539815.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:15.291Z,1520539815.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T20:10:15.292Z,1520539815.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:15.671Z,1520539815.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:15.687Z,1520539815.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T20:10:15.688Z,1520539815.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:16.078Z,1520539816.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:16.093Z,1520539816.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T20:10:16.094Z,1520539816.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:16.485Z,1520539816.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:16.509Z,1520539816.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T20:10:16.510Z,1520539816.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:16.878Z,1520539816.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:16.892Z,1520539816.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T20:10:16.893Z,1520539816.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:17.271Z,1520539817.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:17.290Z,1520539817.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T20:10:17.291Z,1520539817.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:17.677Z,1520539817.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:17.692Z,1520539817.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:18.072Z,1520539818.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:18.087Z,1520539818.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:18.474Z,1520539818.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:18.493Z,1520539818.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:18.880Z,1520539818.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:18.896Z,1520539818.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:19.285Z,1520539819.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:19.300Z,1520539819.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:19.682Z,1520539819.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:19.702Z,1520539819.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:20.081Z,1520539820.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:20.097Z,1520539820.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:20.477Z,1520539820.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:20.498Z,1520539820.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:20.864Z,1520539820.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:20.897Z,1520539820.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:21.279Z,1520539821.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:21.298Z,1520539821.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:21.679Z,1520539821.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:21.694Z,1520539821.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:22.081Z,1520539822.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:22.097Z,1520539822.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:22.481Z,1520539822.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:22.502Z,1520539822.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:22.881Z,1520539822.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:22.897Z,1520539822.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:23.278Z,1520539823.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:23.299Z,1520539823.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:23.675Z,1520539823.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:23.690Z,1520539823.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:24.078Z,1520539824.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:24.093Z,1520539824.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:24.468Z,1520539824.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:24.495Z,1520539824.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:24.878Z,1520539824.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:24.898Z,1520539824.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:25.281Z,1520539825.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:25.296Z,1520539825.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:25.681Z,1520539825.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:25.696Z,1520539825.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:26.081Z,1520539826.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:26.097Z,1520539826.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:26.471Z,1520539826.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:26.535Z,1520539826.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:26.872Z,1520539826.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:26.894Z,1520539826.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:27.280Z,1520539827.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:27.296Z,1520539827.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:27.677Z,1520539827.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:27.692Z,1520539827.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:28.080Z,1520539828.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:28.095Z,1520539828.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:28.485Z,1520539828.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:28.501Z,1520539828.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:28.881Z,1520539828.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:28.902Z,1520539828.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:29.272Z,1520539829.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:29.295Z,1520539829.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:29.678Z,1520539829.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:29.693Z,1520539829.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:30.077Z,1520539830.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:30.092Z,1520539830.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:30.474Z,1520539830.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:30.493Z,1520539830.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:30.875Z,1520539830.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:30.890Z,1520539830.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:31.282Z,1520539831.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:31.297Z,1520539831.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:31.685Z,1520539831.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:31.701Z,1520539831.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:32.082Z,1520539832.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:32.097Z,1520539832.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:32.475Z,1520539832.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:32.491Z,1520539832.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:32.872Z,1520539832.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:32.887Z,1520539832.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:33.274Z,1520539833.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:33.294Z,1520539833.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:33.677Z,1520539833.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:33.692Z,1520539833.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:34.080Z,1520539834.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:34.096Z,1520539834.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:34.485Z,1520539834.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:34.501Z,1520539834.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:34.881Z,1520539834.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:34.896Z,1520539834.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:35.278Z,1520539835.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:35.293Z,1520539835.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:35.675Z,1520539835.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:35.690Z,1520539835.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:36.069Z,1520539836.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:36.095Z,1520539836.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:36.479Z,1520539836.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:36.498Z,1520539836.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:36.875Z,1520539836.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:36.891Z,1520539836.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:37.281Z,1520539837.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:37.297Z,1520539837.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:37.680Z,1520539837.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:37.742Z,1520539837.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:38.081Z,1520539838.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:38.098Z,1520539838.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:38.477Z,1520539838.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:38.498Z,1520539838.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:38.877Z,1520539838.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:38.893Z,1520539838.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:39.274Z,1520539839.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:39.295Z,1520539839.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:39.679Z,1520539839.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:39.694Z,1520539839.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:40.076Z,1520539840.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:40.113Z,1520539840.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:40.481Z,1520539840.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:40.497Z,1520539840.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:40.885Z,1520539840.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:40.901Z,1520539840.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:41.278Z,1520539841.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:41.293Z,1520539841.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:41.675Z,1520539841.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:41.691Z,1520539841.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:44.792Z,1520539844.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:44.853Z,1520539844.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:44.949Z,1520539844.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:45.006Z,1520539845.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:45.346Z,1520539845.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:45.381Z,1520539845.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:45.741Z,1520539845.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:45.757Z,1520539845.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:46.150Z,1520539846.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:46.184Z,1520539846.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:46.534Z,1520539846.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:46.549Z,1520539846.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:46.936Z,1520539846.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:46.951Z,1520539846.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:47.335Z,1520539847.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:47.354Z,1520539847.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:47.733Z,1520539847.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:47.749Z,1520539847.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:48.137Z,1520539848.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:48.153Z,1520539848.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:48.534Z,1520539848.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:48.558Z,1520539848.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:48.941Z,1520539848.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:48.962Z,1520539848.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:49.336Z,1520539849.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:49.351Z,1520539849.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:49.727Z,1520539849.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:49.749Z,1520539849.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:50.127Z,1520539850.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:50.154Z,1520539850.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:50.537Z,1520539850.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:50.552Z,1520539850.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:50.920Z,1520539850.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:50.955Z,1520539850.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:51.341Z,1520539851.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:51.357Z,1520539851.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:51.745Z,1520539851.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:51.760Z,1520539851.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:52.145Z,1520539852.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:52.160Z,1520539852.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:52.536Z,1520539852.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:52.559Z,1520539852.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:52.936Z,1520539852.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:52.958Z,1520539852.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:53.336Z,1520539853.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:53.352Z,1520539853.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:53.731Z,1520539853.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:53.755Z,1520539853.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:54.110Z,1520539854.110 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T20:10:54.110Z,1520539854.110 [NAL9602] Data Fault, FailCount= 4
2018-03-08T20:10:54.110Z,1520539854.110 [NAL9602](ERROR): Data Fault
2018-03-08T20:10:54.147Z,1520539854.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:54.163Z,1520539854.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:54.193Z,1520539854.193 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T20:10:54.510Z,1520539854.510 [NAL9602](INFO): Powering down
2018-03-08T20:10:54.544Z,1520539854.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:54.559Z,1520539854.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:54.931Z,1520539854.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:54.954Z,1520539854.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:55.335Z,1520539855.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:55.354Z,1520539855.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:55.367Z,1520539855.367 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T20:10:55.367Z,1520539855.367 [NAL9602] No Fault, FailCount= 4
2018-03-08T20:10:55.731Z,1520539855.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:55.751Z,1520539855.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:56.139Z,1520539856.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:56.155Z,1520539856.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:56.531Z,1520539856.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:56.567Z,1520539856.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:56.937Z,1520539856.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:56.966Z,1520539856.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:57.323Z,1520539857.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:57.389Z,1520539857.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:57.736Z,1520539857.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:57.751Z,1520539857.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:58.137Z,1520539858.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:58.159Z,1520539858.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:58.536Z,1520539858.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:58.553Z,1520539858.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:58.922Z,1520539858.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:58.956Z,1520539858.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:59.336Z,1520539859.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:59.352Z,1520539859.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:10:59.722Z,1520539859.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:10:59.756Z,1520539859.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:00.122Z,1520539860.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:00.155Z,1520539860.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:00.520Z,1520539860.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:00.547Z,1520539860.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:00.926Z,1520539860.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:00.952Z,1520539860.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:01.319Z,1520539861.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:01.356Z,1520539861.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:01.716Z,1520539861.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:01.731Z,1520539861.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:02.126Z,1520539862.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:02.158Z,1520539862.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:02.518Z,1520539862.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:02.561Z,1520539862.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:02.916Z,1520539862.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:02.931Z,1520539862.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:03.326Z,1520539863.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:03.366Z,1520539863.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:03.723Z,1520539863.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:03.738Z,1520539863.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:04.120Z,1520539864.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:04.136Z,1520539864.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:04.528Z,1520539864.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:04.543Z,1520539864.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:04.931Z,1520539864.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:04.947Z,1520539864.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:05.332Z,1520539865.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:05.348Z,1520539865.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:05.732Z,1520539865.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:05.754Z,1520539865.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:06.128Z,1520539866.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:06.144Z,1520539866.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:06.527Z,1520539866.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:06.555Z,1520539866.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:06.935Z,1520539866.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:06.950Z,1520539866.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:07.335Z,1520539867.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:07.350Z,1520539867.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:07.734Z,1520539867.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:07.750Z,1520539867.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:08.136Z,1520539868.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:08.151Z,1520539868.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:08.535Z,1520539868.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:08.550Z,1520539868.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:08.930Z,1520539868.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:08.946Z,1520539868.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:09.334Z,1520539869.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:09.356Z,1520539869.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:09.730Z,1520539869.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:09.763Z,1520539869.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:10.130Z,1520539870.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:10.166Z,1520539870.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:10.530Z,1520539870.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:10.550Z,1520539870.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:10.935Z,1520539870.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:10.950Z,1520539870.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:11.335Z,1520539871.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:11.350Z,1520539871.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:11.729Z,1520539871.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:11.755Z,1520539871.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:12.134Z,1520539872.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:12.154Z,1520539872.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:12.520Z,1520539872.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:12.552Z,1520539872.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:12.936Z,1520539872.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:12.951Z,1520539872.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:13.335Z,1520539873.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:13.350Z,1520539873.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:13.716Z,1520539873.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:13.755Z,1520539873.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:14.126Z,1520539874.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:14.152Z,1520539874.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:14.522Z,1520539874.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:14.550Z,1520539874.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:14.920Z,1520539874.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:14.959Z,1520539874.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:15.326Z,1520539875.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:15.352Z,1520539875.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:15.726Z,1520539875.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:15.754Z,1520539875.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:16.116Z,1520539876.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:16.131Z,1520539876.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:16.518Z,1520539876.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:16.560Z,1520539876.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:16.924Z,1520539876.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:16.961Z,1520539876.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:17.326Z,1520539877.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:17.362Z,1520539877.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:17.727Z,1520539877.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:17.758Z,1520539877.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:18.126Z,1520539878.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:18.159Z,1520539878.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:18.522Z,1520539878.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:18.555Z,1520539878.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:18.922Z,1520539878.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:18.939Z,1520539878.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:19.324Z,1520539879.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:19.340Z,1520539879.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:19.726Z,1520539879.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:19.743Z,1520539879.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:20.130Z,1520539880.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:20.170Z,1520539880.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:20.524Z,1520539880.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:20.541Z,1520539880.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:20.927Z,1520539880.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:20.943Z,1520539880.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:21.327Z,1520539881.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:21.342Z,1520539881.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:21.730Z,1520539881.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:21.788Z,1520539881.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:22.130Z,1520539882.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:22.179Z,1520539882.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:22.528Z,1520539882.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:22.567Z,1520539882.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:22.931Z,1520539882.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:22.948Z,1520539882.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:23.331Z,1520539883.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:23.348Z,1520539883.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:23.731Z,1520539883.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:23.746Z,1520539883.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:24.131Z,1520539884.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:24.147Z,1520539884.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:24.527Z,1520539884.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:24.543Z,1520539884.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:24.910Z,1520539884.910 [NAL9602](INFO): Powering up NAL9602
2018-03-08T20:11:24.933Z,1520539884.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:24.948Z,1520539884.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:25.331Z,1520539885.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:25.354Z,1520539885.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:25.731Z,1520539885.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:25.747Z,1520539885.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:26.128Z,1520539886.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:26.158Z,1520539886.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:26.529Z,1520539886.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:26.561Z,1520539886.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:26.935Z,1520539886.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:26.950Z,1520539886.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:27.331Z,1520539887.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:27.350Z,1520539887.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:27.734Z,1520539887.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:27.749Z,1520539887.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:28.121Z,1520539888.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:28.153Z,1520539888.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:28.535Z,1520539888.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:28.549Z,1520539888.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:28.935Z,1520539888.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:28.951Z,1520539888.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:29.330Z,1520539889.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:29.348Z,1520539889.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:29.731Z,1520539889.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:29.754Z,1520539889.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:30.134Z,1520539890.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:30.149Z,1520539890.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:30.529Z,1520539890.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:30.550Z,1520539890.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:30.925Z,1520539890.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:30.950Z,1520539890.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:31.329Z,1520539891.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:31.363Z,1520539891.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:31.726Z,1520539891.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:31.754Z,1520539891.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:32.123Z,1520539892.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:32.151Z,1520539892.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:32.526Z,1520539892.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:32.562Z,1520539892.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:32.926Z,1520539892.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:32.954Z,1520539892.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:33.322Z,1520539893.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:33.358Z,1520539893.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:33.722Z,1520539893.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:33.760Z,1520539893.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:34.122Z,1520539894.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:34.167Z,1520539894.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:34.530Z,1520539894.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:34.611Z,1520539894.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:34.927Z,1520539894.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:34.974Z,1520539894.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:35.321Z,1520539895.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:35.352Z,1520539895.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:35.752Z,1520539895.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:35.767Z,1520539895.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:36.102Z,1520539896.102 [NAL9602](INFO): NAL9602 initialized
2018-03-08T20:11:36.119Z,1520539896.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:36.155Z,1520539896.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:36.527Z,1520539896.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:36.559Z,1520539896.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:36.939Z,1520539896.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:36.967Z,1520539896.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:37.338Z,1520539897.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:37.375Z,1520539897.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:37.746Z,1520539897.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:37.777Z,1520539897.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:38.132Z,1520539898.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:38.149Z,1520539898.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:38.532Z,1520539898.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:38.548Z,1520539898.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:38.934Z,1520539898.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:38.950Z,1520539898.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:39.332Z,1520539899.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:39.355Z,1520539899.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:39.733Z,1520539899.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:39.749Z,1520539899.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:40.145Z,1520539900.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:40.178Z,1520539900.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:40.546Z,1520539900.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:40.576Z,1520539900.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:40.931Z,1520539900.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:40.947Z,1520539900.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:41.331Z,1520539901.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:41.347Z,1520539901.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:41.743Z,1520539901.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:41.787Z,1520539901.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:46.115Z,1520539906.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:46.131Z,1520539906.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:46.257Z,1520539906.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:46.303Z,1520539906.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:46.653Z,1520539906.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:46.730Z,1520539906.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:47.032Z,1520539907.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:47.074Z,1520539907.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:47.435Z,1520539907.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:47.488Z,1520539907.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:47.860Z,1520539907.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:47.894Z,1520539907.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:48.261Z,1520539908.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:48.282Z,1520539908.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:48.649Z,1520539908.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:48.678Z,1520539908.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:49.045Z,1520539909.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:49.073Z,1520539909.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:49.439Z,1520539909.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:49.465Z,1520539909.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:49.839Z,1520539909.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:49.868Z,1520539909.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:50.236Z,1520539910.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:50.252Z,1520539910.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:50.634Z,1520539910.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:50.655Z,1520539910.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:51.050Z,1520539911.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:51.084Z,1520539911.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:51.457Z,1520539911.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:51.494Z,1520539911.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:51.849Z,1520539911.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:51.881Z,1520539911.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:52.239Z,1520539912.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:52.283Z,1520539912.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:52.643Z,1520539912.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:52.685Z,1520539912.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:53.039Z,1520539913.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:53.055Z,1520539913.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:53.439Z,1520539913.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:53.460Z,1520539913.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:53.842Z,1520539913.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:53.862Z,1520539913.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:54.253Z,1520539914.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:54.290Z,1520539914.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:54.653Z,1520539914.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:54.690Z,1520539914.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:55.038Z,1520539915.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:55.058Z,1520539915.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:55.439Z,1520539915.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:55.459Z,1520539915.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:55.839Z,1520539915.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:55.863Z,1520539915.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:56.240Z,1520539916.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:56.255Z,1520539916.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:56.640Z,1520539916.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:56.660Z,1520539916.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:57.055Z,1520539917.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:57.087Z,1520539917.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:57.445Z,1520539917.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:57.490Z,1520539917.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:57.853Z,1520539917.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:57.890Z,1520539917.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:58.240Z,1520539918.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:58.261Z,1520539918.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:58.638Z,1520539918.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:58.666Z,1520539918.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:59.036Z,1520539919.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:59.063Z,1520539919.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:59.101Z,1520539919.101 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T20:11:59.442Z,1520539919.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:59.459Z,1520539919.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:11:59.845Z,1520539919.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:11:59.893Z,1520539919.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:00.252Z,1520539920.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:00.295Z,1520539920.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:00.648Z,1520539920.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:00.692Z,1520539920.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:01.043Z,1520539921.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:01.058Z,1520539921.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:01.444Z,1520539921.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:01.465Z,1520539921.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:01.844Z,1520539921.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:01.863Z,1520539921.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:02.243Z,1520539922.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:02.291Z,1520539922.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:02.635Z,1520539922.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:02.650Z,1520539922.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:03.048Z,1520539923.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:03.068Z,1520539923.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:03.453Z,1520539923.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:03.474Z,1520539923.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:03.858Z,1520539923.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:03.891Z,1520539923.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:04.243Z,1520539924.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:04.265Z,1520539924.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:04.643Z,1520539924.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:04.665Z,1520539924.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:05.046Z,1520539925.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:05.064Z,1520539925.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:05.440Z,1520539925.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:05.493Z,1520539925.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:05.849Z,1520539925.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:05.869Z,1520539925.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:06.254Z,1520539926.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:06.272Z,1520539926.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:06.655Z,1520539926.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:06.674Z,1520539926.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:07.040Z,1520539927.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:07.093Z,1520539927.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:07.439Z,1520539927.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:07.455Z,1520539927.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:07.839Z,1520539927.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:07.863Z,1520539927.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:08.247Z,1520539928.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:08.265Z,1520539928.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:08.639Z,1520539928.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:08.693Z,1520539928.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:09.052Z,1520539929.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:09.076Z,1520539929.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:09.453Z,1520539929.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:09.473Z,1520539929.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:09.855Z,1520539929.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:09.896Z,1520539929.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:10.240Z,1520539930.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:10.294Z,1520539930.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:10.641Z,1520539930.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:10.657Z,1520539930.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:11.039Z,1520539931.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:11.059Z,1520539931.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:11.440Z,1520539931.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:11.483Z,1520539931.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:11.853Z,1520539931.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:11.907Z,1520539931.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:12.253Z,1520539932.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:12.302Z,1520539932.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:12.664Z,1520539932.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:12.707Z,1520539932.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:13.039Z,1520539933.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:13.086Z,1520539933.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:13.439Z,1520539933.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:13.463Z,1520539933.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:13.840Z,1520539933.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:13.855Z,1520539933.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:14.240Z,1520539934.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:14.260Z,1520539934.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:14.640Z,1520539934.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:14.660Z,1520539934.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:15.046Z,1520539935.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:15.090Z,1520539935.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:15.453Z,1520539935.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:15.488Z,1520539935.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:15.855Z,1520539935.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:15.885Z,1520539935.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:16.240Z,1520539936.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:16.260Z,1520539936.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:16.638Z,1520539936.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:16.687Z,1520539936.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:17.041Z,1520539937.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:17.057Z,1520539937.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:17.440Z,1520539937.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:17.461Z,1520539937.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:17.855Z,1520539937.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:17.886Z,1520539937.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:18.244Z,1520539938.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:18.284Z,1520539938.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:18.644Z,1520539938.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:18.660Z,1520539938.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:19.038Z,1520539939.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:19.068Z,1520539939.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:19.448Z,1520539939.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:19.465Z,1520539939.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:19.844Z,1520539939.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:19.894Z,1520539939.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:20.241Z,1520539940.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:20.256Z,1520539940.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:20.627Z,1520539940.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:20.669Z,1520539940.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:21.056Z,1520539941.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:21.071Z,1520539941.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:21.453Z,1520539941.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:21.499Z,1520539941.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:21.856Z,1520539941.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:21.877Z,1520539941.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:22.231Z,1520539942.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:22.273Z,1520539942.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:22.635Z,1520539942.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:22.667Z,1520539942.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:23.031Z,1520539943.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:23.063Z,1520539943.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:23.431Z,1520539943.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:23.459Z,1520539943.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:23.856Z,1520539943.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:23.882Z,1520539943.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:24.257Z,1520539944.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:24.287Z,1520539944.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:24.658Z,1520539944.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:24.690Z,1520539944.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:25.034Z,1520539945.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:25.080Z,1520539945.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:25.431Z,1520539945.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:25.477Z,1520539945.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:25.831Z,1520539945.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:25.899Z,1520539945.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:26.241Z,1520539946.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:26.256Z,1520539946.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:26.651Z,1520539946.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:26.690Z,1520539946.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:27.058Z,1520539947.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:27.075Z,1520539947.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:27.462Z,1520539947.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:27.487Z,1520539947.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:27.856Z,1520539947.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:27.912Z,1520539947.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:28.231Z,1520539948.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:28.258Z,1520539948.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:28.678Z,1520539948.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:28.705Z,1520539948.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:29.031Z,1520539949.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:29.065Z,1520539949.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:29.435Z,1520539949.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:29.485Z,1520539949.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:29.841Z,1520539949.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:29.865Z,1520539949.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:30.261Z,1520539950.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:30.276Z,1520539950.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:30.647Z,1520539950.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:30.722Z,1520539950.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:31.038Z,1520539951.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:31.071Z,1520539951.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:31.439Z,1520539951.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:31.476Z,1520539951.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:31.839Z,1520539951.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:31.874Z,1520539951.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:32.239Z,1520539952.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:32.269Z,1520539952.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:32.636Z,1520539952.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:32.670Z,1520539952.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:33.045Z,1520539953.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:33.075Z,1520539953.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:33.464Z,1520539953.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:33.480Z,1520539953.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:33.863Z,1520539953.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:33.886Z,1520539953.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:34.236Z,1520539954.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:34.270Z,1520539954.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:34.639Z,1520539954.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:34.674Z,1520539954.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:35.043Z,1520539955.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:35.074Z,1520539955.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:35.435Z,1520539955.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:35.470Z,1520539955.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:35.857Z,1520539955.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:35.890Z,1520539955.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:36.246Z,1520539956.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:36.284Z,1520539956.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:36.656Z,1520539956.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:36.694Z,1520539956.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:37.032Z,1520539957.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:37.070Z,1520539957.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:37.435Z,1520539957.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:37.482Z,1520539957.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:37.839Z,1520539957.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:37.886Z,1520539957.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:38.237Z,1520539958.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:38.270Z,1520539958.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:38.639Z,1520539958.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:38.680Z,1520539958.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:39.045Z,1520539959.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:39.084Z,1520539959.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:39.453Z,1520539959.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:39.487Z,1520539959.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:39.854Z,1520539959.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:39.883Z,1520539959.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:40.239Z,1520539960.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:40.286Z,1520539960.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:40.638Z,1520539960.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:40.684Z,1520539960.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:41.040Z,1520539961.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:41.055Z,1520539961.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:41.440Z,1520539961.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:41.459Z,1520539961.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:41.856Z,1520539961.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:41.890Z,1520539961.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:44.972Z,1520539964.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:44.994Z,1520539964.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:45.102Z,1520539965.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:45.136Z,1520539965.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:45.451Z,1520539965.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:45.490Z,1520539965.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:45.851Z,1520539965.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:45.896Z,1520539965.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:46.252Z,1520539966.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:46.283Z,1520539966.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:46.650Z,1520539966.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:46.683Z,1520539966.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:47.074Z,1520539967.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:47.098Z,1520539967.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:47.475Z,1520539967.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:47.491Z,1520539967.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:47.870Z,1520539967.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:47.885Z,1520539967.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:48.250Z,1520539968.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:48.279Z,1520539968.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:48.651Z,1520539968.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:48.702Z,1520539968.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:49.051Z,1520539969.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:49.095Z,1520539969.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:49.451Z,1520539969.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:49.492Z,1520539969.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:49.861Z,1520539969.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:49.893Z,1520539969.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:50.261Z,1520539970.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:50.306Z,1520539970.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:50.667Z,1520539970.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:50.698Z,1520539970.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:51.043Z,1520539971.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:51.086Z,1520539971.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:51.452Z,1520539971.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:51.488Z,1520539971.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:51.843Z,1520539971.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:51.868Z,1520539971.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:52.248Z,1520539972.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:52.267Z,1520539972.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:52.648Z,1520539972.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:52.668Z,1520539972.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:53.067Z,1520539973.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:53.095Z,1520539973.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:53.453Z,1520539973.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:53.498Z,1520539973.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:53.857Z,1520539973.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:53.893Z,1520539973.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:54.252Z,1520539974.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:54.272Z,1520539974.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:54.644Z,1520539974.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:54.669Z,1520539974.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:55.052Z,1520539975.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:55.095Z,1520539975.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:55.453Z,1520539975.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:55.473Z,1520539975.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:55.850Z,1520539975.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:55.890Z,1520539975.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:56.260Z,1520539976.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:56.275Z,1520539976.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:56.666Z,1520539976.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:56.698Z,1520539976.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:57.050Z,1520539977.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:57.091Z,1520539977.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:57.454Z,1520539977.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:57.473Z,1520539977.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:57.855Z,1520539977.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:57.870Z,1520539977.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:58.253Z,1520539978.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:58.293Z,1520539978.293 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:58.294Z,1520539978.294 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 249
2018-03-08T20:12:58.294Z,1520539978.294 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T20:12:58.295Z,1520539978.295 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:58.295Z,1520539978.295 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 249
2018-03-08T20:12:58.296Z,1520539978.296 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T20:12:58.297Z,1520539978.297 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:58.297Z,1520539978.297 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 249
2018-03-08T20:12:58.298Z,1520539978.298 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T20:12:58.309Z,1520539978.309 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T20:12:58.310Z,1520539978.310 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T20:12:58.310Z,1520539978.310 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T20:12:58.645Z,1520539978.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:58.699Z,1520539978.699 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T20:12:58.699Z,1520539978.699 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 249
2018-03-08T20:12:58.699Z,1520539978.699 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T20:12:58.700Z,1520539978.700 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 249
2018-03-08T20:12:58.700Z,1520539978.700 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T20:12:58.700Z,1520539978.700 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 249
2018-03-08T20:12:59.064Z,1520539979.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:59.079Z,1520539979.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T20:12:59.079Z,1520539979.079 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:12:59.079Z,1520539979.079 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:12:59.080Z,1520539979.080 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T20:12:59.080Z,1520539979.080 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:12:59.080Z,1520539979.080 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:12:59.081Z,1520539979.081 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T20:12:59.081Z,1520539979.081 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:12:59.082Z,1520539979.082 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:12:59.468Z,1520539979.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:59.487Z,1520539979.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T20:12:59.492Z,1520539979.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:12:59.862Z,1520539979.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:12:59.894Z,1520539979.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T20:12:59.895Z,1520539979.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:00.247Z,1520539980.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:00.280Z,1520539980.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T20:13:00.281Z,1520539980.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:00.648Z,1520539980.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:00.682Z,1520539980.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T20:13:00.683Z,1520539980.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:01.046Z,1520539981.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:01.075Z,1520539981.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T20:13:01.076Z,1520539981.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:01.443Z,1520539981.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:01.513Z,1520539981.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T20:13:01.514Z,1520539981.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:01.870Z,1520539981.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:01.923Z,1520539981.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T20:13:01.923Z,1520539981.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:02.273Z,1520539982.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:02.295Z,1520539982.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T20:13:02.296Z,1520539982.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:02.676Z,1520539982.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:02.710Z,1520539982.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T20:13:02.711Z,1520539982.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:03.044Z,1520539983.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:03.087Z,1520539983.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T20:13:03.087Z,1520539983.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:03.450Z,1520539983.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:03.486Z,1520539983.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T20:13:03.487Z,1520539983.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:03.851Z,1520539983.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:03.893Z,1520539983.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T20:13:03.894Z,1520539983.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:04.255Z,1520539984.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:04.287Z,1520539984.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T20:13:04.288Z,1520539984.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:04.648Z,1520539984.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:04.694Z,1520539984.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T20:13:04.695Z,1520539984.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:05.072Z,1520539985.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:05.097Z,1520539985.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T20:13:05.098Z,1520539985.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:05.460Z,1520539985.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:05.492Z,1520539985.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T20:13:05.493Z,1520539985.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:05.866Z,1520539985.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:05.894Z,1520539985.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T20:13:05.895Z,1520539985.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:06.252Z,1520539986.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:06.291Z,1520539986.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T20:13:06.292Z,1520539986.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:06.649Z,1520539986.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:06.668Z,1520539986.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T20:13:06.670Z,1520539986.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:07.055Z,1520539987.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:07.074Z,1520539987.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T20:13:07.075Z,1520539987.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:07.455Z,1520539987.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:07.469Z,1520539987.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T20:13:07.470Z,1520539987.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:07.852Z,1520539987.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:07.893Z,1520539987.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T20:13:07.894Z,1520539987.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:08.258Z,1520539988.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:08.278Z,1520539988.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T20:13:08.279Z,1520539988.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:08.661Z,1520539988.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:08.676Z,1520539988.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T20:13:08.677Z,1520539988.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:09.059Z,1520539989.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:09.074Z,1520539989.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T20:13:09.075Z,1520539989.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:09.451Z,1520539989.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:09.485Z,1520539989.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T20:13:09.486Z,1520539989.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:09.855Z,1520539989.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:09.882Z,1520539989.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T20:13:09.883Z,1520539989.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:10.258Z,1520539990.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:10.282Z,1520539990.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T20:13:10.283Z,1520539990.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:10.658Z,1520539990.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:10.675Z,1520539990.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T20:13:10.676Z,1520539990.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:11.062Z,1520539991.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:11.102Z,1520539991.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T20:13:11.102Z,1520539991.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:11.462Z,1520539991.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:11.482Z,1520539991.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T20:13:11.483Z,1520539991.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:11.864Z,1520539991.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:11.887Z,1520539991.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T20:13:11.887Z,1520539991.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:12.261Z,1520539992.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:12.276Z,1520539992.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T20:13:12.277Z,1520539992.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:12.655Z,1520539992.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:12.687Z,1520539992.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T20:13:12.688Z,1520539992.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:13.056Z,1520539993.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:13.082Z,1520539993.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T20:13:13.083Z,1520539993.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:13.458Z,1520539993.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:13.475Z,1520539993.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T20:13:13.476Z,1520539993.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:13.870Z,1520539993.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:13.885Z,1520539993.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T20:13:13.886Z,1520539993.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:14.264Z,1520539994.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:14.322Z,1520539994.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T20:13:14.323Z,1520539994.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:14.672Z,1520539994.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:14.730Z,1520539994.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T20:13:14.731Z,1520539994.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:15.039Z,1520539995.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:15.107Z,1520539995.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T20:13:15.108Z,1520539995.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:15.444Z,1520539995.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:15.486Z,1520539995.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T20:13:15.487Z,1520539995.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:15.860Z,1520539995.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:15.894Z,1520539995.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T20:13:15.895Z,1520539995.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:16.256Z,1520539996.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:16.276Z,1520539996.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T20:13:16.277Z,1520539996.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:16.643Z,1520539996.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:16.674Z,1520539996.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T20:13:16.674Z,1520539996.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:17.069Z,1520539997.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:17.090Z,1520539997.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T20:13:17.091Z,1520539997.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:17.455Z,1520539997.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:17.490Z,1520539997.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T20:13:17.491Z,1520539997.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:17.868Z,1520539997.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:17.885Z,1520539997.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T20:13:17.886Z,1520539997.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:18.243Z,1520539998.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:18.275Z,1520539998.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T20:13:18.276Z,1520539998.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:18.637Z,1520539998.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:18.675Z,1520539998.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:19.047Z,1520539999.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:19.090Z,1520539999.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:19.447Z,1520539999.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:19.486Z,1520539999.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:19.858Z,1520539999.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:19.888Z,1520539999.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:20.267Z,1520540000.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:20.282Z,1520540000.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:20.666Z,1520540000.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:20.715Z,1520540000.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:21.037Z,1520540001.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:21.079Z,1520540001.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:21.442Z,1520540001.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:21.479Z,1520540001.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:21.849Z,1520540001.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:21.879Z,1520540001.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:22.243Z,1520540002.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:22.285Z,1520540002.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:22.674Z,1520540002.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:22.706Z,1520540002.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:23.084Z,1520540003.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:23.099Z,1520540003.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:23.456Z,1520540003.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:23.483Z,1520540003.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:23.853Z,1520540003.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:23.898Z,1520540003.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:24.247Z,1520540004.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:24.287Z,1520540004.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:24.647Z,1520540004.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:24.685Z,1520540004.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:25.054Z,1520540005.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:25.080Z,1520540005.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:25.451Z,1520540005.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:25.486Z,1520540005.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:25.853Z,1520540005.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:25.887Z,1520540005.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:26.276Z,1520540006.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:26.292Z,1520540006.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:26.675Z,1520540006.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:26.691Z,1520540006.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:27.043Z,1520540007.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:27.107Z,1520540007.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:27.450Z,1520540007.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:27.498Z,1520540007.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:27.847Z,1520540007.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:27.883Z,1520540007.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:28.247Z,1520540008.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:28.265Z,1520540008.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:28.650Z,1520540008.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:28.698Z,1520540008.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:29.061Z,1520540009.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:29.093Z,1520540009.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:29.463Z,1520540009.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:29.494Z,1520540009.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:29.863Z,1520540009.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:29.892Z,1520540009.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:30.249Z,1520540010.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:30.302Z,1520540010.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:30.645Z,1520540010.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:30.660Z,1520540010.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:31.050Z,1520540011.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:31.075Z,1520540011.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:31.455Z,1520540011.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:31.470Z,1520540011.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:31.865Z,1520540011.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:31.893Z,1520540011.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:32.258Z,1520540012.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:32.294Z,1520540012.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:32.668Z,1520540012.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:32.702Z,1520540012.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:33.055Z,1520540013.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:33.074Z,1520540013.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:33.452Z,1520540013.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:33.498Z,1520540013.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:33.852Z,1520540013.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:33.873Z,1520540013.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:34.253Z,1520540014.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:34.272Z,1520540014.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:34.653Z,1520540014.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:34.672Z,1520540014.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:35.061Z,1520540015.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:35.102Z,1520540015.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:35.457Z,1520540015.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:35.477Z,1520540015.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:35.860Z,1520540015.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:35.877Z,1520540015.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:36.258Z,1520540016.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:36.278Z,1520540016.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:36.653Z,1520540016.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:36.699Z,1520540016.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:37.058Z,1520540017.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:37.078Z,1520540017.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:37.457Z,1520540017.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:37.475Z,1520540017.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:37.860Z,1520540017.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:37.875Z,1520540017.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:38.269Z,1520540018.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:38.299Z,1520540018.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:38.657Z,1520540018.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:38.702Z,1520540018.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:39.051Z,1520540019.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:39.095Z,1520540019.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:39.455Z,1520540019.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:39.489Z,1520540019.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:39.857Z,1520540019.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:39.929Z,1520540019.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:40.251Z,1520540020.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:40.301Z,1520540020.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:40.659Z,1520540020.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:40.676Z,1520540020.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:41.066Z,1520540021.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:41.082Z,1520540021.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:41.464Z,1520540021.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:41.519Z,1520540021.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:41.521Z,1520540021.521 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T20:13:41.522Z,1520540021.522 [Default:CheckIn:C.Wait] Stopped
2018-03-08T20:13:41.522Z,1520540021.522 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T20:13:41.522Z,1520540021.522 [Default:CheckIn:D] Running Loop=1
2018-03-08T20:13:41.885Z,1520540021.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:41.919Z,1520540021.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:41.923Z,1520540021.923 [Default:CheckIn:D] Stopped
2018-03-08T20:13:41.923Z,1520540021.923 [Default:CheckIn:E] Running Loop=1
2018-03-08T20:13:46.153Z,1520540026.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:46.169Z,1520540026.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:46.172Z,1520540026.172 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 747.951953 min 
2018-03-08T20:13:46.173Z,1520540026.173 [Default:CheckIn:E] Stopped
2018-03-08T20:13:46.173Z,1520540026.173 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T20:13:46.173Z,1520540026.173 [Default:CheckIn] Stopped
2018-03-08T20:13:46.173Z,1520540026.173 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T20:13:46.173Z,1520540026.173 [Default:CheckIn](INFO): Running loop #73
2018-03-08T20:13:46.173Z,1520540026.173 [Default:CheckIn] Running Loop=73
2018-03-08T20:13:46.173Z,1520540026.173 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T20:13:46.173Z,1520540026.173 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T20:13:46.261Z,1520540026.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:46.295Z,1520540026.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:46.638Z,1520540026.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:46.653Z,1520540026.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:47.033Z,1520540027.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:47.049Z,1520540027.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:47.441Z,1520540027.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:47.462Z,1520540027.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:47.819Z,1520540027.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:47.851Z,1520540027.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:48.219Z,1520540028.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:48.259Z,1520540028.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:48.623Z,1520540028.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:48.665Z,1520540028.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:49.037Z,1520540029.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:49.067Z,1520540029.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:49.453Z,1520540029.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:49.487Z,1520540029.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:49.837Z,1520540029.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:49.862Z,1520540029.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:50.224Z,1520540030.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:50.240Z,1520540030.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:50.631Z,1520540030.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:50.672Z,1520540030.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:51.025Z,1520540031.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:51.040Z,1520540031.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:51.430Z,1520540031.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:51.447Z,1520540031.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:51.840Z,1520540031.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:51.877Z,1520540031.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:52.237Z,1520540032.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:52.295Z,1520540032.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:52.644Z,1520540032.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:52.698Z,1520540032.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:53.031Z,1520540033.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:53.047Z,1520540033.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:53.419Z,1520540033.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:53.450Z,1520540033.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:53.831Z,1520540033.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:53.854Z,1520540033.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:54.215Z,1520540034.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:54.252Z,1520540034.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:54.615Z,1520540034.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:54.641Z,1520540034.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:55.038Z,1520540035.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:55.055Z,1520540035.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:55.446Z,1520540035.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:55.464Z,1520540035.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:55.841Z,1520540035.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:55.891Z,1520540035.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:56.219Z,1520540036.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:56.243Z,1520540036.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:56.623Z,1520540036.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:56.651Z,1520540036.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:57.022Z,1520540037.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:57.058Z,1520540037.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:57.419Z,1520540037.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:57.442Z,1520540037.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:57.845Z,1520540037.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:57.861Z,1520540037.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:58.321Z,1520540038.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:58.344Z,1520540038.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:58.641Z,1520540038.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:58.661Z,1520540038.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:59.016Z,1520540039.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:59.052Z,1520540039.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:59.423Z,1520540039.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:59.450Z,1520540039.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:13:59.819Z,1520540039.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:13:59.851Z,1520540039.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:00.219Z,1520540040.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:00.255Z,1520540040.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:00.623Z,1520540040.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:00.658Z,1520540040.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:01.034Z,1520540041.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:01.059Z,1520540041.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:01.436Z,1520540041.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:01.467Z,1520540041.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:01.837Z,1520540041.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:01.875Z,1520540041.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:02.223Z,1520540042.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:02.262Z,1520540042.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:02.624Z,1520540042.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:02.639Z,1520540042.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:03.025Z,1520540043.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:03.041Z,1520540043.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:03.427Z,1520540043.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:03.466Z,1520540043.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:03.837Z,1520540043.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:03.872Z,1520540043.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:04.237Z,1520540044.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:04.269Z,1520540044.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:04.641Z,1520540044.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:04.682Z,1520540044.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:05.023Z,1520540045.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:05.059Z,1520540045.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:05.423Z,1520540045.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:05.483Z,1520540045.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:05.832Z,1520540045.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:05.848Z,1520540045.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:06.228Z,1520540046.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:06.243Z,1520540046.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:06.631Z,1520540046.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:06.652Z,1520540046.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:07.041Z,1520540047.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:07.056Z,1520540047.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:07.440Z,1520540047.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:07.456Z,1520540047.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:07.837Z,1520540047.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:07.854Z,1520540047.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:08.231Z,1520540048.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:08.251Z,1520540048.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:08.632Z,1520540048.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:08.647Z,1520540048.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:09.032Z,1520540049.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:09.047Z,1520540049.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:09.427Z,1520540049.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:09.446Z,1520540049.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:09.837Z,1520540049.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:09.863Z,1520540049.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:10.240Z,1520540050.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:10.262Z,1520540050.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:10.641Z,1520540050.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:10.664Z,1520540050.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:11.031Z,1520540051.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:11.046Z,1520540051.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:11.431Z,1520540051.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:11.451Z,1520540051.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:11.819Z,1520540051.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:11.855Z,1520540051.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:12.223Z,1520540052.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:12.255Z,1520540052.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:12.619Z,1520540052.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:12.660Z,1520540052.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:13.029Z,1520540053.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:13.068Z,1520540053.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:13.447Z,1520540053.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:13.466Z,1520540053.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:13.833Z,1520540053.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:13.860Z,1520540053.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:14.227Z,1520540054.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:14.263Z,1520540054.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:14.619Z,1520540054.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:14.634Z,1520540054.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:15.026Z,1520540055.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:15.053Z,1520540055.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:15.429Z,1520540055.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:15.444Z,1520540055.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:15.842Z,1520540055.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:15.878Z,1520540055.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:16.237Z,1520540056.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:16.267Z,1520540056.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:16.638Z,1520540056.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:16.670Z,1520540056.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:17.023Z,1520540057.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:17.082Z,1520540057.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:17.434Z,1520540057.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:17.486Z,1520540057.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:17.831Z,1520540057.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:17.867Z,1520540057.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:18.233Z,1520540058.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:18.288Z,1520540058.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:18.631Z,1520540058.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:18.647Z,1520540058.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:19.032Z,1520540059.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:19.078Z,1520540059.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:19.436Z,1520540059.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:19.457Z,1520540059.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:19.836Z,1520540059.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:19.852Z,1520540059.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:20.226Z,1520540060.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:20.253Z,1520540060.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:20.632Z,1520540060.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:20.647Z,1520540060.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:21.033Z,1520540061.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:21.053Z,1520540061.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:21.431Z,1520540061.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:21.446Z,1520540061.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:21.842Z,1520540061.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:21.859Z,1520540061.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:22.245Z,1520540062.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:22.266Z,1520540062.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:22.641Z,1520540062.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:22.747Z,1520540062.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:23.031Z,1520540063.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:23.046Z,1520540063.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:23.432Z,1520540063.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:23.447Z,1520540063.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:23.840Z,1520540063.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:23.939Z,1520540063.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:24.220Z,1520540064.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:24.253Z,1520540064.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:24.616Z,1520540064.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:24.655Z,1520540064.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:25.037Z,1520540065.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:25.057Z,1520540065.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:25.442Z,1520540065.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:25.465Z,1520540065.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:25.842Z,1520540065.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:25.862Z,1520540065.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:26.223Z,1520540066.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:26.266Z,1520540066.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:26.620Z,1520540066.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:26.674Z,1520540066.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:27.021Z,1520540067.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:27.050Z,1520540067.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:27.419Z,1520540067.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:27.450Z,1520540067.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:27.842Z,1520540067.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:27.859Z,1520540067.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:28.245Z,1520540068.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:28.264Z,1520540068.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:28.638Z,1520540068.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:28.654Z,1520540068.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:29.019Z,1520540069.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:29.060Z,1520540069.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:29.423Z,1520540069.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:29.450Z,1520540069.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:29.819Z,1520540069.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:29.846Z,1520540069.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:30.219Z,1520540070.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:30.265Z,1520540070.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:30.619Z,1520540070.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:30.666Z,1520540070.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:31.041Z,1520540071.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:31.057Z,1520540071.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:31.439Z,1520540071.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:31.478Z,1520540071.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:31.843Z,1520540071.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:31.863Z,1520540071.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:32.219Z,1520540072.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:32.262Z,1520540072.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:32.619Z,1520540072.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:32.655Z,1520540072.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:33.022Z,1520540073.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:33.055Z,1520540073.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:33.419Z,1520540073.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:33.456Z,1520540073.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:33.846Z,1520540073.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:33.864Z,1520540073.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:34.245Z,1520540074.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:34.283Z,1520540074.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:34.642Z,1520540074.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:34.657Z,1520540074.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:35.019Z,1520540075.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:35.059Z,1520540075.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:35.423Z,1520540075.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:35.454Z,1520540075.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:35.827Z,1520540075.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:35.861Z,1520540075.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:36.223Z,1520540076.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:36.238Z,1520540076.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:36.667Z,1520540076.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:36.682Z,1520540076.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:37.033Z,1520540077.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:37.064Z,1520540077.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:37.437Z,1520540077.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:37.466Z,1520540077.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:37.841Z,1520540077.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:37.875Z,1520540077.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:38.227Z,1520540078.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:38.271Z,1520540078.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:38.627Z,1520540078.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:38.644Z,1520540078.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:39.025Z,1520540079.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:39.040Z,1520540079.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:39.424Z,1520540079.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:39.447Z,1520540079.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:39.841Z,1520540079.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:39.877Z,1520540079.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:40.241Z,1520540080.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:40.268Z,1520540080.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:40.629Z,1520540080.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:40.670Z,1520540080.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:41.026Z,1520540081.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:41.041Z,1520540081.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:41.426Z,1520540081.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:41.446Z,1520540081.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:41.826Z,1520540081.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:41.841Z,1520540081.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:42.229Z,1520540082.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:42.244Z,1520540082.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:45.324Z,1520540085.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:45.370Z,1520540085.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:45.475Z,1520540085.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:45.530Z,1520540085.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:45.854Z,1520540085.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:45.885Z,1520540085.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:46.237Z,1520540086.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:46.274Z,1520540086.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:46.636Z,1520540086.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:46.665Z,1520540086.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:47.035Z,1520540087.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:47.050Z,1520540087.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:47.436Z,1520540087.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:47.452Z,1520540087.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:47.837Z,1520540087.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:47.854Z,1520540087.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:48.252Z,1520540088.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:48.286Z,1520540088.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:48.636Z,1520540088.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:48.681Z,1520540088.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:49.036Z,1520540089.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:49.051Z,1520540089.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:49.435Z,1520540089.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:49.450Z,1520540089.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:49.827Z,1520540089.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:49.851Z,1520540089.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:50.237Z,1520540090.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:50.253Z,1520540090.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:50.631Z,1520540090.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:50.647Z,1520540090.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:51.037Z,1520540091.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:51.054Z,1520540091.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:51.447Z,1520540091.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:51.465Z,1520540091.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:51.845Z,1520540091.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:51.886Z,1520540091.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:52.242Z,1520540092.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:52.257Z,1520540092.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:52.639Z,1520540092.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:52.665Z,1520540092.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:53.041Z,1520540093.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:53.062Z,1520540093.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:53.438Z,1520540093.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:53.486Z,1520540093.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:53.849Z,1520540093.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:53.867Z,1520540093.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:54.245Z,1520540094.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:54.266Z,1520540094.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:54.647Z,1520540094.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:54.665Z,1520540094.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:55.033Z,1520540095.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:55.066Z,1520540095.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:55.440Z,1520540095.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:55.455Z,1520540095.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:55.840Z,1520540095.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:55.865Z,1520540095.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:56.239Z,1520540096.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:56.263Z,1520540096.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:56.635Z,1520540096.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:56.666Z,1520540096.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:57.045Z,1520540097.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:57.071Z,1520540097.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:57.448Z,1520540097.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:57.502Z,1520540097.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:57.852Z,1520540097.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:57.902Z,1520540097.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:58.239Z,1520540098.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:58.276Z,1520540098.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:58.627Z,1520540098.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:58.663Z,1520540098.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:59.031Z,1520540099.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:59.065Z,1520540099.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:59.431Z,1520540099.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:59.462Z,1520540099.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:14:59.850Z,1520540099.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:14:59.893Z,1520540099.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:00.246Z,1520540100.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:00.261Z,1520540100.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:00.646Z,1520540100.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:00.666Z,1520540100.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:01.027Z,1520540101.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:01.059Z,1520540101.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:01.427Z,1520540101.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:01.460Z,1520540101.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:01.825Z,1520540101.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:01.863Z,1520540101.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:02.228Z,1520540102.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:02.264Z,1520540102.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:02.627Z,1520540102.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:02.666Z,1520540102.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:03.045Z,1520540103.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:03.074Z,1520540103.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:03.454Z,1520540103.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:03.474Z,1520540103.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:03.853Z,1520540103.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:03.872Z,1520540103.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:04.231Z,1520540104.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:04.263Z,1520540104.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:04.631Z,1520540104.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:04.677Z,1520540104.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:05.031Z,1520540105.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:05.060Z,1520540105.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:05.431Z,1520540105.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:05.463Z,1520540105.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:05.849Z,1520540105.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:05.871Z,1520540105.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:06.250Z,1520540106.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:06.285Z,1520540106.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:06.650Z,1520540106.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:06.671Z,1520540106.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:07.027Z,1520540107.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:07.064Z,1520540107.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:07.423Z,1520540107.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:07.471Z,1520540107.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:07.831Z,1520540107.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:07.862Z,1520540107.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:08.227Z,1520540108.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:08.259Z,1520540108.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:08.631Z,1520540108.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:08.675Z,1520540108.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:09.041Z,1520540109.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:09.073Z,1520540109.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:09.441Z,1520540109.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:09.487Z,1520540109.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:09.841Z,1520540109.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:09.876Z,1520540109.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:10.231Z,1520540110.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:10.264Z,1520540110.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:10.635Z,1520540110.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:10.694Z,1520540110.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:11.035Z,1520540111.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:11.088Z,1520540111.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:11.432Z,1520540111.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:11.447Z,1520540111.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:11.849Z,1520540111.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:11.878Z,1520540111.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:12.252Z,1520540112.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:12.282Z,1520540112.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:12.649Z,1520540112.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:12.684Z,1520540112.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:13.032Z,1520540113.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:13.047Z,1520540113.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:13.437Z,1520540113.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:13.480Z,1520540113.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:13.827Z,1520540113.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:13.851Z,1520540113.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:14.237Z,1520540114.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:14.252Z,1520540114.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:14.635Z,1520540114.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:14.650Z,1520540114.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:15.037Z,1520540115.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:15.054Z,1520540115.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:15.453Z,1520540115.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:15.484Z,1520540115.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:15.850Z,1520540115.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:15.887Z,1520540115.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:16.234Z,1520540116.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:16.249Z,1520540116.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:16.634Z,1520540116.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:16.649Z,1520540116.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:17.037Z,1520540117.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:17.057Z,1520540117.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:17.432Z,1520540117.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:17.448Z,1520540117.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:17.837Z,1520540117.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:17.853Z,1520540117.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:18.249Z,1520540118.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:18.285Z,1520540118.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:18.638Z,1520540118.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:18.658Z,1520540118.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:19.034Z,1520540119.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:19.049Z,1520540119.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:19.436Z,1520540119.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:19.452Z,1520540119.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:19.831Z,1520540119.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:19.846Z,1520540119.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:20.230Z,1520540120.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:20.261Z,1520540120.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:20.634Z,1520540120.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:20.655Z,1520540120.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:21.041Z,1520540121.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:21.057Z,1520540121.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:21.445Z,1520540121.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:21.466Z,1520540121.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:21.847Z,1520540121.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:21.865Z,1520540121.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:22.239Z,1520540122.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:22.286Z,1520540122.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:22.636Z,1520540122.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:22.651Z,1520540122.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:23.045Z,1520540123.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:23.099Z,1520540123.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:23.427Z,1520540123.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:23.478Z,1520540123.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:23.846Z,1520540123.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:23.862Z,1520540123.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:24.252Z,1520540124.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:24.279Z,1520540124.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:24.644Z,1520540124.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:24.681Z,1520540124.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:25.034Z,1520540125.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:25.087Z,1520540125.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:25.437Z,1520540125.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:25.491Z,1520540125.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:25.837Z,1520540125.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:25.890Z,1520540125.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:26.235Z,1520540126.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:26.251Z,1520540126.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:26.635Z,1520540126.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:26.656Z,1520540126.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:27.050Z,1520540127.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:27.084Z,1520540127.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:27.445Z,1520540127.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:27.460Z,1520540127.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:27.849Z,1520540127.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:27.885Z,1520540127.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:28.234Z,1520540128.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:28.255Z,1520540128.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:28.634Z,1520540128.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:28.657Z,1520540128.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:29.035Z,1520540129.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:29.056Z,1520540129.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:29.435Z,1520540129.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:29.450Z,1520540129.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:29.842Z,1520540129.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:29.862Z,1520540129.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:30.241Z,1520540130.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:30.285Z,1520540130.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:30.641Z,1520540130.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:30.657Z,1520540130.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:31.034Z,1520540131.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:31.067Z,1520540131.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:31.442Z,1520540131.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:31.462Z,1520540131.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:31.840Z,1520540131.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:31.893Z,1520540131.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:32.241Z,1520540132.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:32.256Z,1520540132.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:32.641Z,1520540132.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:32.661Z,1520540132.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:33.051Z,1520540133.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:33.067Z,1520540133.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:33.453Z,1520540133.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:33.498Z,1520540133.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:33.850Z,1520540133.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:33.871Z,1520540133.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:34.239Z,1520540134.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:34.258Z,1520540134.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:34.628Z,1520540134.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:34.668Z,1520540134.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:35.040Z,1520540135.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:35.063Z,1520540135.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:35.427Z,1520540135.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:35.476Z,1520540135.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:35.849Z,1520540135.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:35.877Z,1520540135.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:36.253Z,1520540136.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:36.303Z,1520540136.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:36.651Z,1520540136.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:36.699Z,1520540136.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:37.031Z,1520540137.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:37.057Z,1520540137.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:37.431Z,1520540137.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:37.464Z,1520540137.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:37.831Z,1520540137.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:37.862Z,1520540137.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:38.228Z,1520540138.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:38.270Z,1520540138.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:38.631Z,1520540138.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:38.658Z,1520540138.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:39.049Z,1520540139.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:39.069Z,1520540139.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:39.453Z,1520540139.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:39.468Z,1520540139.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:39.851Z,1520540139.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:39.878Z,1520540139.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:40.223Z,1520540140.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:40.259Z,1520540140.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:40.627Z,1520540140.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:40.655Z,1520540140.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:41.023Z,1520540141.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:41.063Z,1520540141.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:41.431Z,1520540141.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:41.466Z,1520540141.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:41.850Z,1520540141.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:41.868Z,1520540141.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:42.253Z,1520540142.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:42.310Z,1520540142.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:46.606Z,1520540146.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:46.627Z,1520540146.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:46.735Z,1520540146.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:46.775Z,1520540146.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:47.112Z,1520540147.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:47.147Z,1520540147.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:47.516Z,1520540147.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:47.539Z,1520540147.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:47.916Z,1520540147.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:47.943Z,1520540147.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:48.299Z,1520540148.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:48.347Z,1520540148.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:48.705Z,1520540148.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:48.751Z,1520540148.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:49.121Z,1520540149.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:49.137Z,1520540149.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:49.519Z,1520540149.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:49.535Z,1520540149.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:49.899Z,1520540149.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:49.930Z,1520540149.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:50.295Z,1520540150.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:50.322Z,1520540150.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:50.723Z,1520540150.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:50.738Z,1520540150.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:51.122Z,1520540151.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:51.137Z,1520540151.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:51.505Z,1520540151.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:51.541Z,1520540151.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:51.895Z,1520540151.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:51.935Z,1520540151.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:52.296Z,1520540152.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:52.311Z,1520540152.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:52.713Z,1520540152.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:52.740Z,1520540152.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:53.126Z,1520540153.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:53.141Z,1520540153.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:53.509Z,1520540153.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:53.535Z,1520540153.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:53.903Z,1520540153.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:53.935Z,1520540153.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:54.301Z,1520540154.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:54.316Z,1520540154.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:54.709Z,1520540154.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:54.741Z,1520540154.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:55.113Z,1520540155.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:55.136Z,1520540155.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:55.517Z,1520540155.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:55.550Z,1520540155.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:55.904Z,1520540155.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:55.920Z,1520540155.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:56.303Z,1520540156.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:56.319Z,1520540156.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:56.713Z,1520540156.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:56.741Z,1520540156.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:57.117Z,1520540157.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:57.149Z,1520540157.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:57.509Z,1520540157.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:57.525Z,1520540157.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:57.911Z,1520540157.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:57.927Z,1520540157.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:58.307Z,1520540158.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:58.322Z,1520540158.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:58.712Z,1520540158.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:58.728Z,1520540158.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:59.113Z,1520540159.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:59.128Z,1520540159.128 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:59.129Z,1520540159.129 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 250
2018-03-08T20:15:59.129Z,1520540159.129 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T20:15:59.130Z,1520540159.130 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:59.130Z,1520540159.130 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 250
2018-03-08T20:15:59.130Z,1520540159.130 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T20:15:59.132Z,1520540159.132 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:15:59.132Z,1520540159.132 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 250
2018-03-08T20:15:59.132Z,1520540159.132 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T20:15:59.180Z,1520540159.180 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T20:15:59.180Z,1520540159.180 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T20:15:59.181Z,1520540159.181 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T20:15:59.516Z,1520540159.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:59.542Z,1520540159.542 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T20:15:59.542Z,1520540159.542 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 250
2018-03-08T20:15:59.542Z,1520540159.542 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T20:15:59.543Z,1520540159.543 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 250
2018-03-08T20:15:59.543Z,1520540159.543 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T20:15:59.543Z,1520540159.543 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 250
2018-03-08T20:15:59.911Z,1520540159.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:15:59.925Z,1520540159.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T20:15:59.925Z,1520540159.925 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:15:59.926Z,1520540159.926 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:15:59.926Z,1520540159.926 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T20:15:59.926Z,1520540159.926 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:15:59.927Z,1520540159.927 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:15:59.927Z,1520540159.927 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T20:15:59.927Z,1520540159.927 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:15:59.928Z,1520540159.928 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:16:00.295Z,1520540160.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:00.342Z,1520540160.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T20:16:00.343Z,1520540160.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:00.722Z,1520540160.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:00.778Z,1520540160.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-03-08T20:16:00.779Z,1520540160.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:01.125Z,1520540161.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:01.158Z,1520540161.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T20:16:01.159Z,1520540161.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:01.520Z,1520540161.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:01.535Z,1520540161.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T20:16:01.536Z,1520540161.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:01.899Z,1520540161.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:01.932Z,1520540161.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T20:16:01.933Z,1520540161.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:02.303Z,1520540162.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:02.334Z,1520540162.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T20:16:02.335Z,1520540162.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:02.712Z,1520540162.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:02.735Z,1520540162.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T20:16:02.736Z,1520540162.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:03.123Z,1520540163.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:03.139Z,1520540163.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T20:16:03.140Z,1520540163.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:03.519Z,1520540163.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:03.534Z,1520540163.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T20:16:03.535Z,1520540163.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:03.904Z,1520540163.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:03.930Z,1520540163.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T20:16:03.931Z,1520540163.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:04.297Z,1520540164.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:04.311Z,1520540164.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T20:16:04.329Z,1520540164.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:04.709Z,1520540164.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:04.735Z,1520540164.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T20:16:04.736Z,1520540164.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:05.109Z,1520540165.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:05.136Z,1520540165.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T20:16:05.137Z,1520540165.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:05.513Z,1520540165.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:05.539Z,1520540165.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T20:16:05.540Z,1520540165.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:05.902Z,1520540165.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:05.938Z,1520540165.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T20:16:05.939Z,1520540165.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:06.295Z,1520540166.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:06.309Z,1520540166.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T20:16:06.310Z,1520540166.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:06.713Z,1520540166.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:06.737Z,1520540166.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T20:16:06.738Z,1520540166.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:07.117Z,1520540167.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:07.139Z,1520540167.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T20:16:07.140Z,1520540167.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:07.513Z,1520540167.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:07.542Z,1520540167.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T20:16:07.543Z,1520540167.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:07.896Z,1520540167.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:07.911Z,1520540167.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T20:16:07.913Z,1520540167.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:08.299Z,1520540168.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:08.315Z,1520540168.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T20:16:08.316Z,1520540168.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:08.717Z,1520540168.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:08.750Z,1520540168.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T20:16:08.751Z,1520540168.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:09.113Z,1520540169.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:09.144Z,1520540169.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T20:16:09.146Z,1520540169.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:09.509Z,1520540169.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:09.525Z,1520540169.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T20:16:09.525Z,1520540169.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:09.906Z,1520540169.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:09.921Z,1520540169.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T20:16:09.922Z,1520540169.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:10.306Z,1520540170.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:10.321Z,1520540170.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T20:16:10.322Z,1520540170.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:10.718Z,1520540170.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:10.747Z,1520540170.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T20:16:10.748Z,1520540170.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:11.109Z,1520540171.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:11.124Z,1520540171.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T20:16:11.125Z,1520540171.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:11.517Z,1520540171.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:11.546Z,1520540171.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T20:16:11.547Z,1520540171.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:11.906Z,1520540171.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:11.921Z,1520540171.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T20:16:11.921Z,1520540171.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:12.296Z,1520540172.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:12.311Z,1520540172.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T20:16:12.312Z,1520540172.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:12.709Z,1520540172.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:12.732Z,1520540172.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T20:16:12.733Z,1520540172.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:13.109Z,1520540173.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:13.150Z,1520540173.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T20:16:13.151Z,1520540173.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:13.521Z,1520540173.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:13.575Z,1520540173.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T20:16:13.575Z,1520540173.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:13.894Z,1520540173.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:13.914Z,1520540173.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T20:16:13.915Z,1520540173.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:14.297Z,1520540174.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:14.312Z,1520540174.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T20:16:14.313Z,1520540174.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:14.709Z,1520540174.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:14.730Z,1520540174.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T20:16:14.731Z,1520540174.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:15.113Z,1520540175.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:15.128Z,1520540175.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T20:16:15.129Z,1520540175.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:15.522Z,1520540175.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:15.563Z,1520540175.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T20:16:15.563Z,1520540175.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:15.897Z,1520540175.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:15.911Z,1520540175.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T20:16:15.912Z,1520540175.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:16.300Z,1520540176.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:16.315Z,1520540176.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T20:16:16.316Z,1520540176.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:16.710Z,1520540176.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:16.738Z,1520540176.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T20:16:16.739Z,1520540176.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:17.110Z,1520540177.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:17.157Z,1520540177.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T20:16:17.158Z,1520540177.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:17.514Z,1520540177.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:17.538Z,1520540177.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T20:16:17.539Z,1520540177.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:17.901Z,1520540177.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:17.919Z,1520540177.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T20:16:17.920Z,1520540177.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:18.303Z,1520540178.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:18.319Z,1520540178.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T20:16:18.320Z,1520540178.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:18.705Z,1520540178.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:18.721Z,1520540178.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T20:16:18.722Z,1520540178.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:19.117Z,1520540179.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:19.147Z,1520540179.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:19.505Z,1520540179.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:19.520Z,1520540179.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:19.905Z,1520540179.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:19.920Z,1520540179.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:20.304Z,1520540180.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:20.320Z,1520540180.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:20.721Z,1520540180.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:20.755Z,1520540180.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:21.113Z,1520540181.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:21.145Z,1520540181.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:21.517Z,1520540181.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:21.549Z,1520540181.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:21.908Z,1520540181.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:21.923Z,1520540181.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:22.303Z,1520540182.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:22.319Z,1520540182.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:22.709Z,1520540182.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:22.724Z,1520540182.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:23.115Z,1520540183.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:23.133Z,1520540183.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:23.513Z,1520540183.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:23.528Z,1520540183.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:23.904Z,1520540183.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:23.920Z,1520540183.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:24.303Z,1520540184.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:24.319Z,1520540184.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:24.713Z,1520540184.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:24.735Z,1520540184.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:25.114Z,1520540185.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:25.137Z,1520540185.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:25.517Z,1520540185.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:25.561Z,1520540185.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:25.908Z,1520540185.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:25.931Z,1520540185.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:26.305Z,1520540186.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:26.343Z,1520540186.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:26.717Z,1520540186.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:26.732Z,1520540186.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:27.120Z,1520540187.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:27.136Z,1520540187.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:27.517Z,1520540187.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:27.532Z,1520540187.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:27.908Z,1520540187.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:27.923Z,1520540187.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:28.307Z,1520540188.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:28.326Z,1520540188.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:28.713Z,1520540188.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:28.729Z,1520540188.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:29.118Z,1520540189.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:29.133Z,1520540189.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:29.517Z,1520540189.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:29.532Z,1520540189.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:29.912Z,1520540189.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:29.928Z,1520540189.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:30.294Z,1520540190.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:30.322Z,1520540190.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:30.705Z,1520540190.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:30.736Z,1520540190.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:31.117Z,1520540191.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:31.138Z,1520540191.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:31.518Z,1520540191.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:31.533Z,1520540191.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:31.893Z,1520540191.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:31.931Z,1520540191.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:32.298Z,1520540192.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:32.325Z,1520540192.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:32.719Z,1520540192.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:32.734Z,1520540192.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:33.118Z,1520540193.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:33.133Z,1520540193.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:33.518Z,1520540193.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:33.533Z,1520540193.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:33.895Z,1520540193.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:33.936Z,1520540193.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:34.299Z,1520540194.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:34.325Z,1520540194.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:34.722Z,1520540194.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:34.742Z,1520540194.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:35.121Z,1520540195.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:35.137Z,1520540195.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:35.518Z,1520540195.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:35.538Z,1520540195.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:35.910Z,1520540195.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:35.925Z,1520540195.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:36.312Z,1520540196.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:36.327Z,1520540196.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:36.718Z,1520540196.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:36.739Z,1520540196.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:37.121Z,1520540197.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:37.142Z,1520540197.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:37.523Z,1520540197.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:37.575Z,1520540197.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:37.897Z,1520540197.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:37.931Z,1520540197.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:38.295Z,1520540198.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:38.339Z,1520540198.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:38.718Z,1520540198.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:38.748Z,1520540198.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:39.121Z,1520540199.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:39.137Z,1520540199.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:39.523Z,1520540199.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:39.543Z,1520540199.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:39.895Z,1520540199.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:39.933Z,1520540199.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:40.295Z,1520540200.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:40.330Z,1520540200.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:40.721Z,1520540200.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:40.743Z,1520540200.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:41.125Z,1520540201.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:41.140Z,1520540201.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:41.505Z,1520540201.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:41.542Z,1520540201.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:41.904Z,1520540201.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:41.935Z,1520540201.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:42.303Z,1520540202.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:42.319Z,1520540202.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:45.410Z,1520540205.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:45.439Z,1520540205.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:45.542Z,1520540205.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:45.563Z,1520540205.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:45.917Z,1520540205.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:45.947Z,1520540205.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:46.294Z,1520540206.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:46.309Z,1520540206.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:46.696Z,1520540206.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:46.715Z,1520540206.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:47.105Z,1520540207.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:47.120Z,1520540207.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:47.499Z,1520540207.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:47.518Z,1520540207.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:47.902Z,1520540207.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:47.917Z,1520540207.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:48.301Z,1520540208.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:48.316Z,1520540208.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:48.706Z,1520540208.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:48.721Z,1520540208.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:49.099Z,1520540209.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:49.115Z,1520540209.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:49.499Z,1520540209.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:49.520Z,1520540209.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:49.893Z,1520540209.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:49.943Z,1520540209.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:50.303Z,1520540210.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:50.319Z,1520540210.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:50.698Z,1520540210.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:50.720Z,1520540210.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:51.106Z,1520540211.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:51.152Z,1520540211.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:51.501Z,1520540211.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:51.516Z,1520540211.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:51.927Z,1520540211.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:51.946Z,1520540211.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:52.294Z,1520540212.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:52.314Z,1520540212.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:52.697Z,1520540212.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:52.712Z,1520540212.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:53.095Z,1520540213.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:53.111Z,1520540213.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:53.492Z,1520540213.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:53.512Z,1520540213.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:53.909Z,1520540213.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:53.945Z,1520540213.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:54.305Z,1520540214.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:54.321Z,1520540214.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:54.701Z,1520540214.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:54.719Z,1520540214.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:55.103Z,1520540215.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:55.119Z,1520540215.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:55.495Z,1520540215.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:55.511Z,1520540215.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:55.888Z,1520540215.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:55.919Z,1520540215.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:56.293Z,1520540216.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:56.313Z,1520540216.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:56.700Z,1520540216.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:56.715Z,1520540216.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:57.104Z,1520540217.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:57.120Z,1520540217.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:57.505Z,1520540217.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:57.521Z,1520540217.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:57.905Z,1520540217.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:57.921Z,1520540217.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:58.304Z,1520540218.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:58.319Z,1520540218.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:58.702Z,1520540218.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:58.717Z,1520540218.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:59.101Z,1520540219.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:59.116Z,1520540219.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:59.499Z,1520540219.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:59.515Z,1520540219.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:16:59.907Z,1520540219.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:16:59.927Z,1520540219.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:00.305Z,1520540220.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:00.321Z,1520540220.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:00.705Z,1520540220.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:00.721Z,1520540220.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:01.099Z,1520540221.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:01.119Z,1520540221.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:01.504Z,1520540221.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:01.519Z,1520540221.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:01.901Z,1520540221.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:01.923Z,1520540221.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:02.303Z,1520540222.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:02.351Z,1520540222.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:02.709Z,1520540222.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:02.730Z,1520540222.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:03.108Z,1520540223.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:03.124Z,1520540223.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:03.509Z,1520540223.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:03.531Z,1520540223.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:03.887Z,1520540223.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:03.927Z,1520540223.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:04.300Z,1520540224.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:04.315Z,1520540224.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:04.688Z,1520540224.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:04.718Z,1520540224.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:05.109Z,1520540225.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:05.125Z,1520540225.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:05.509Z,1520540225.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:05.525Z,1520540225.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:05.909Z,1520540225.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:05.924Z,1520540225.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:06.304Z,1520540226.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:06.319Z,1520540226.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:06.683Z,1520540226.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:06.715Z,1520540226.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:07.091Z,1520540227.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:07.118Z,1520540227.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:07.487Z,1520540227.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:07.515Z,1520540227.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:07.897Z,1520540227.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:07.925Z,1520540227.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:08.314Z,1520540228.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:08.329Z,1520540228.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:08.709Z,1520540228.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:08.724Z,1520540228.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:09.084Z,1520540229.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:09.115Z,1520540229.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:09.494Z,1520540229.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:09.520Z,1520540229.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:09.889Z,1520540229.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:09.924Z,1520540229.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:10.288Z,1520540230.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:10.320Z,1520540230.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:10.690Z,1520540230.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:10.726Z,1520540230.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:11.105Z,1520540231.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:11.138Z,1520540231.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:11.501Z,1520540231.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:11.528Z,1520540231.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:11.905Z,1520540231.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:11.932Z,1520540231.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:12.295Z,1520540232.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:12.335Z,1520540232.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:12.691Z,1520540232.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:12.727Z,1520540232.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:13.099Z,1520540233.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:13.131Z,1520540233.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:13.495Z,1520540233.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:13.515Z,1520540233.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:13.905Z,1520540233.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:13.939Z,1520540233.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:14.314Z,1520540234.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:14.352Z,1520540234.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:14.701Z,1520540234.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:14.741Z,1520540234.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:15.094Z,1520540235.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:15.115Z,1520540235.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:15.494Z,1520540235.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:15.509Z,1520540235.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:15.902Z,1520540235.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:15.918Z,1520540235.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:16.292Z,1520540236.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:16.339Z,1520540236.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:16.701Z,1520540236.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:16.750Z,1520540236.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:17.102Z,1520540237.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:17.122Z,1520540237.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:17.502Z,1520540237.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:17.531Z,1520540237.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:17.900Z,1520540237.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:17.915Z,1520540237.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:18.300Z,1520540238.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:18.316Z,1520540238.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:18.701Z,1520540238.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:18.717Z,1520540238.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:19.104Z,1520540239.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:19.120Z,1520540239.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:19.505Z,1520540239.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:19.526Z,1520540239.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:19.893Z,1520540239.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:19.909Z,1520540239.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:20.293Z,1520540240.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:20.314Z,1520540240.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:20.703Z,1520540240.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:20.719Z,1520540240.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:21.104Z,1520540241.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:21.127Z,1520540241.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:21.505Z,1520540241.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:21.526Z,1520540241.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:21.906Z,1520540241.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:21.927Z,1520540241.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:22.301Z,1520540242.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:22.317Z,1520540242.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:22.698Z,1520540242.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:22.713Z,1520540242.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:23.104Z,1520540243.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:23.120Z,1520540243.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:23.495Z,1520540243.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:23.510Z,1520540243.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:23.907Z,1520540243.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:23.927Z,1520540243.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:24.305Z,1520540244.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:24.326Z,1520540244.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:24.709Z,1520540244.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:24.724Z,1520540244.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:25.099Z,1520540245.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:25.114Z,1520540245.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:25.496Z,1520540245.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:25.524Z,1520540245.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:25.890Z,1520540245.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:25.918Z,1520540245.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:26.291Z,1520540246.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:26.318Z,1520540246.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:26.688Z,1520540246.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:26.730Z,1520540246.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:27.095Z,1520540247.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:27.139Z,1520540247.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:27.513Z,1520540247.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:27.529Z,1520540247.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:27.918Z,1520540247.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:27.935Z,1520540247.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:28.291Z,1520540248.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:28.323Z,1520540248.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:28.690Z,1520540248.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:28.742Z,1520540248.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:29.092Z,1520540249.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:29.132Z,1520540249.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:29.495Z,1520540249.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:29.527Z,1520540249.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:29.901Z,1520540249.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:29.934Z,1520540249.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:30.315Z,1520540250.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:30.330Z,1520540250.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:30.702Z,1520540250.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:30.730Z,1520540250.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:31.090Z,1520540251.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:31.128Z,1520540251.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:31.487Z,1520540251.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:31.503Z,1520540251.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:31.895Z,1520540251.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:31.931Z,1520540251.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:32.299Z,1520540252.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:32.331Z,1520540252.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:32.706Z,1520540252.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:32.740Z,1520540252.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:33.106Z,1520540253.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:33.136Z,1520540253.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:33.510Z,1520540253.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:33.542Z,1520540253.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:33.894Z,1520540253.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:33.910Z,1520540253.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:34.295Z,1520540254.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:34.312Z,1520540254.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:34.692Z,1520540254.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:34.708Z,1520540254.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:35.098Z,1520540255.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:35.114Z,1520540255.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:35.510Z,1520540255.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:35.540Z,1520540255.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:35.909Z,1520540255.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:35.942Z,1520540255.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:36.297Z,1520540256.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:36.318Z,1520540256.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:36.697Z,1520540256.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:36.717Z,1520540256.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:37.096Z,1520540257.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:37.112Z,1520540257.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:37.495Z,1520540257.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:37.511Z,1520540257.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:37.897Z,1520540257.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:37.914Z,1520540257.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:38.313Z,1520540258.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:38.344Z,1520540258.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:38.701Z,1520540258.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:38.719Z,1520540258.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:39.098Z,1520540259.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:39.121Z,1520540259.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:39.494Z,1520540259.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:39.544Z,1520540259.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:39.896Z,1520540259.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:39.926Z,1520540259.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:40.300Z,1520540260.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:40.316Z,1520540260.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:40.700Z,1520540260.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:40.716Z,1520540260.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:41.101Z,1520540261.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:41.123Z,1520540261.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:41.506Z,1520540261.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:41.553Z,1520540261.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:41.905Z,1520540261.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:41.921Z,1520540261.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:42.300Z,1520540262.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:42.316Z,1520540262.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:42.693Z,1520540262.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:42.715Z,1520540262.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:47.004Z,1520540267.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:47.020Z,1520540267.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:47.119Z,1520540267.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:47.196Z,1520540267.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:47.510Z,1520540267.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:47.539Z,1520540267.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:47.895Z,1520540267.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:47.926Z,1520540267.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:48.290Z,1520540268.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:48.323Z,1520540268.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:48.675Z,1520540268.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:48.700Z,1520540268.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:49.077Z,1520540269.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:49.093Z,1520540269.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:49.483Z,1520540269.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:49.507Z,1520540269.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:49.884Z,1520540269.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:49.899Z,1520540269.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:50.284Z,1520540270.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:50.299Z,1520540270.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:50.685Z,1520540270.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:50.701Z,1520540270.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:51.074Z,1520540271.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:51.098Z,1520540271.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:51.483Z,1520540271.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:51.505Z,1520540271.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:51.868Z,1520540271.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:51.910Z,1520540271.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:52.280Z,1520540272.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:52.303Z,1520540272.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:52.683Z,1520540272.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:52.710Z,1520540272.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:53.084Z,1520540273.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:53.124Z,1520540273.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:53.489Z,1520540273.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:53.505Z,1520540273.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:53.889Z,1520540273.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:53.904Z,1520540273.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:54.289Z,1520540274.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:54.305Z,1520540274.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:54.682Z,1520540274.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:54.702Z,1520540274.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:55.084Z,1520540275.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:55.099Z,1520540275.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:55.480Z,1520540275.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:55.495Z,1520540275.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:55.890Z,1520540275.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:55.909Z,1520540275.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:56.296Z,1520540276.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:56.311Z,1520540276.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:56.679Z,1520540276.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:56.701Z,1520540276.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:57.080Z,1520540277.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:57.095Z,1520540277.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:57.463Z,1520540277.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:57.497Z,1520540277.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:57.860Z,1520540277.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:57.897Z,1520540277.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:58.273Z,1520540278.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:58.306Z,1520540278.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:58.666Z,1520540278.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:58.694Z,1520540278.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:59.093Z,1520540279.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:59.109Z,1520540279.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:59.494Z,1520540279.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:59.510Z,1520540279.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:17:59.890Z,1520540279.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:17:59.910Z,1520540279.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:00.280Z,1520540280.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:00.295Z,1520540280.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:00.666Z,1520540280.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:00.698Z,1520540280.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:01.081Z,1520540281.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:01.102Z,1520540281.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:01.483Z,1520540281.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:01.498Z,1520540281.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:01.926Z,1520540281.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:01.941Z,1520540281.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:02.285Z,1520540282.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:02.304Z,1520540282.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:02.690Z,1520540282.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:02.785Z,1520540282.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:03.069Z,1520540283.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:03.103Z,1520540283.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:03.469Z,1520540283.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:03.497Z,1520540283.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:03.867Z,1520540283.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:03.905Z,1520540283.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:04.269Z,1520540284.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:04.314Z,1520540284.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:04.669Z,1520540284.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:04.698Z,1520540284.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:05.090Z,1520540285.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:05.106Z,1520540285.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:05.498Z,1520540285.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:05.513Z,1520540285.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:05.896Z,1520540285.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:05.912Z,1520540285.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:06.274Z,1520540286.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:06.306Z,1520540286.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:06.669Z,1520540286.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:06.696Z,1520540286.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:07.068Z,1520540287.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:07.102Z,1520540287.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:07.474Z,1520540287.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:07.518Z,1520540287.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:07.895Z,1520540287.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:07.911Z,1520540287.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:08.290Z,1520540288.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:08.305Z,1520540288.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:08.682Z,1520540288.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:08.711Z,1520540288.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:09.074Z,1520540289.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:09.102Z,1520540289.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:09.470Z,1520540289.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:09.504Z,1520540289.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:09.872Z,1520540289.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:09.906Z,1520540289.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:10.268Z,1520540290.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:10.310Z,1520540290.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:10.671Z,1520540290.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:10.701Z,1520540290.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:11.094Z,1520540291.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:11.114Z,1520540291.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:11.485Z,1520540291.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:11.515Z,1520540291.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:11.894Z,1520540291.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:11.910Z,1520540291.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:12.268Z,1520540292.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:12.307Z,1520540292.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:12.671Z,1520540292.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:12.694Z,1520540292.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:13.070Z,1520540293.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:13.094Z,1520540293.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:13.469Z,1520540293.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:13.518Z,1520540293.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:13.879Z,1520540293.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:13.909Z,1520540293.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:14.281Z,1520540294.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:14.310Z,1520540294.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:14.683Z,1520540294.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:14.722Z,1520540294.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:15.073Z,1520540295.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:15.129Z,1520540295.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:15.482Z,1520540295.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:15.547Z,1520540295.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:15.877Z,1520540295.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:15.927Z,1520540295.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:16.278Z,1520540296.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:16.293Z,1520540296.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:16.677Z,1520540296.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:16.695Z,1520540296.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:17.084Z,1520540297.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:17.099Z,1520540297.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:17.485Z,1520540297.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:17.500Z,1520540297.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:17.881Z,1520540297.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:17.902Z,1520540297.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:18.279Z,1520540298.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:18.297Z,1520540298.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:18.678Z,1520540298.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:18.693Z,1520540298.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:19.084Z,1520540299.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:19.099Z,1520540299.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:19.479Z,1520540299.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:19.495Z,1520540299.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:19.881Z,1520540299.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:19.898Z,1520540299.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:20.287Z,1520540300.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:20.302Z,1520540300.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:20.678Z,1520540300.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:20.707Z,1520540300.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:21.079Z,1520540301.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:21.095Z,1520540301.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:21.471Z,1520540301.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:21.507Z,1520540301.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:21.860Z,1520540301.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:21.911Z,1520540301.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:22.284Z,1520540302.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:22.299Z,1520540302.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:22.678Z,1520540302.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:22.693Z,1520540302.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:23.091Z,1520540303.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:23.105Z,1520540303.105 [BPC1](ERROR): Failed to receive battery data
2018-03-08T20:18:23.105Z,1520540303.105 [BPC1] Communications Fault, FailCount= 1
2018-03-08T20:18:23.105Z,1520540303.105 [BPC1](ERROR): Communications Fault
2018-03-08T20:18:23.138Z,1520540303.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:23.157Z,1520540303.157 [CBIT](ERROR): Communications Fault in component: BPC1
2018-03-08T20:18:23.508Z,1520540303.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:23.540Z,1520540303.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:23.888Z,1520540303.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:23.910Z,1520540303.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:24.277Z,1520540304.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:24.293Z,1520540304.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:24.306Z,1520540304.306 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-08T20:18:24.306Z,1520540304.306 [BPC1] No Fault, FailCount= 1
2018-03-08T20:18:24.669Z,1520540304.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:24.758Z,1520540304.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:25.084Z,1520540305.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:25.111Z,1520540305.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:25.482Z,1520540305.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:25.498Z,1520540305.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:25.889Z,1520540305.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:25.904Z,1520540305.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:26.289Z,1520540306.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:26.309Z,1520540306.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:26.683Z,1520540306.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:26.710Z,1520540306.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:27.078Z,1520540307.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:27.110Z,1520540307.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:27.472Z,1520540307.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:27.487Z,1520540307.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:27.862Z,1520540307.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:27.906Z,1520540307.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:28.274Z,1520540308.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:28.305Z,1520540308.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:28.678Z,1520540308.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:28.717Z,1520540308.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:29.082Z,1520540309.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:29.113Z,1520540309.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:29.491Z,1520540309.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:29.515Z,1520540309.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:29.887Z,1520540309.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:29.918Z,1520540309.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:30.271Z,1520540310.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:30.324Z,1520540310.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:30.678Z,1520540310.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:30.693Z,1520540310.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:31.078Z,1520540311.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:31.119Z,1520540311.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:31.475Z,1520540311.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:31.494Z,1520540311.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:31.893Z,1520540311.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:31.916Z,1520540311.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:32.285Z,1520540312.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:32.316Z,1520540312.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:32.673Z,1520540312.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:32.693Z,1520540312.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:33.074Z,1520540313.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:33.102Z,1520540313.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:33.476Z,1520540313.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:33.504Z,1520540313.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:33.875Z,1520540313.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:33.903Z,1520540313.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:34.283Z,1520540314.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:34.299Z,1520540314.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:34.674Z,1520540314.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:34.706Z,1520540314.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:35.086Z,1520540315.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:35.102Z,1520540315.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:35.489Z,1520540315.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:35.510Z,1520540315.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:35.898Z,1520540315.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:35.913Z,1520540315.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:36.281Z,1520540316.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:36.303Z,1520540316.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:36.673Z,1520540316.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:36.698Z,1520540316.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:37.077Z,1520540317.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:37.098Z,1520540317.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:37.467Z,1520540317.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:37.498Z,1520540317.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:37.889Z,1520540317.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:37.904Z,1520540317.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:38.293Z,1520540318.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:38.309Z,1520540318.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:38.690Z,1520540318.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:38.710Z,1520540318.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:39.071Z,1520540319.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:39.102Z,1520540319.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:39.469Z,1520540319.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:39.506Z,1520540319.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:39.874Z,1520540319.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:39.901Z,1520540319.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:40.270Z,1520540320.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:40.297Z,1520540320.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:40.667Z,1520540320.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:40.721Z,1520540320.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:41.080Z,1520540321.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:41.122Z,1520540321.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:41.493Z,1520540321.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:41.509Z,1520540321.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:41.917Z,1520540321.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:42.003Z,1520540322.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:42.264Z,1520540322.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:42.306Z,1520540322.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:42.673Z,1520540322.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:42.700Z,1520540322.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:43.096Z,1520540323.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:43.112Z,1520540323.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:46.356Z,1520540326.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:46.372Z,1520540326.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:46.375Z,1520540326.375 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T20:13:46.2Z
2018-03-08T20:18:46.375Z,1520540326.375 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T20:18:46.375Z,1520540326.375 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T20:18:46.504Z,1520540326.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:46.545Z,1520540326.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:46.923Z,1520540326.923 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20180308T074127/Courier0292.lzma
2018-03-08T20:18:46.957Z,1520540326.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:46.973Z,1520540326.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:47.257Z,1520540327.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:47.276Z,1520540327.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:47.619Z,1520540327.619 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0292.lzma.bak
2018-03-08T20:18:47.620Z,1520540327.620 [DataOverHttps](INFO): SBD MOMSN=7988801
2018-03-08T20:18:47.663Z,1520540327.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:47.678Z,1520540327.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:48.225Z,1520540328.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:48.257Z,1520540328.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:48.439Z,1520540328.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:48.461Z,1520540328.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:51.561Z,1520540331.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:51.577Z,1520540331.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:51.699Z,1520540331.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:51.731Z,1520540331.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:52.060Z,1520540332.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:52.075Z,1520540332.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:52.456Z,1520540332.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:52.471Z,1520540332.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:52.852Z,1520540332.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:52.868Z,1520540332.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:53.251Z,1520540333.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:53.267Z,1520540333.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:53.649Z,1520540333.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:53.675Z,1520540333.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:56.770Z,1520540336.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:56.786Z,1520540336.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:56.889Z,1520540336.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:56.931Z,1520540336.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:57.237Z,1520540337.237 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0293.lzma
2018-03-08T20:18:57.285Z,1520540337.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:57.309Z,1520540337.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:57.666Z,1520540337.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:57.681Z,1520540337.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:58.036Z,1520540338.036 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0293.lzma.bak
2018-03-08T20:18:58.036Z,1520540338.036 [DataOverHttps](INFO): SBD MOMSN=7988803
2018-03-08T20:18:58.076Z,1520540338.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:58.111Z,1520540338.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:58.639Z,1520540338.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:58.663Z,1520540338.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:18:58.669Z,1520540338.669 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T20:18:58.669Z,1520540338.669 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T20:18:58.669Z,1520540338.669 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T20:18:58.869Z,1520540338.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:18:58.885Z,1520540338.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:01.981Z,1520540341.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:02.014Z,1520540342.014 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:02.014Z,1520540342.014 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 251
2018-03-08T20:19:02.014Z,1520540342.014 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T20:19:02.016Z,1520540342.016 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:02.016Z,1520540342.016 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 251
2018-03-08T20:19:02.016Z,1520540342.016 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T20:19:02.018Z,1520540342.018 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:02.018Z,1520540342.018 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 251
2018-03-08T20:19:02.018Z,1520540342.018 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T20:19:02.029Z,1520540342.029 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T20:19:02.029Z,1520540342.029 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T20:19:02.029Z,1520540342.029 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T20:19:02.119Z,1520540342.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:02.189Z,1520540342.189 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T20:19:02.190Z,1520540342.190 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 251
2018-03-08T20:19:02.190Z,1520540342.190 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T20:19:02.190Z,1520540342.190 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 251
2018-03-08T20:19:02.191Z,1520540342.191 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T20:19:02.191Z,1520540342.191 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 251
2018-03-08T20:19:02.479Z,1520540342.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:02.494Z,1520540342.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T20:19:02.494Z,1520540342.494 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:19:02.494Z,1520540342.494 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:19:02.495Z,1520540342.495 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T20:19:02.495Z,1520540342.495 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:19:02.495Z,1520540342.495 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:19:02.496Z,1520540342.496 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T20:19:02.496Z,1520540342.496 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:19:02.497Z,1520540342.497 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:19:02.873Z,1520540342.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:02.888Z,1520540342.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-03-08T20:19:02.889Z,1520540342.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:03.271Z,1520540343.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:03.291Z,1520540343.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-03-08T20:19:03.292Z,1520540343.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:03.667Z,1520540343.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:03.690Z,1520540343.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-03-08T20:19:03.691Z,1520540343.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:04.085Z,1520540344.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:04.099Z,1520540344.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-03-08T20:19:04.101Z,1520540344.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:04.485Z,1520540344.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:04.500Z,1520540344.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-03-08T20:19:04.501Z,1520540344.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:04.885Z,1520540344.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:04.900Z,1520540344.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-03-08T20:19:04.901Z,1520540344.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:05.259Z,1520540345.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:05.292Z,1520540345.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-03-08T20:19:05.293Z,1520540345.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:05.658Z,1520540345.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:05.698Z,1520540345.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-08T20:19:05.699Z,1520540345.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:06.063Z,1520540346.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:06.089Z,1520540346.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-03-08T20:19:06.090Z,1520540346.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:06.459Z,1520540346.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:06.492Z,1520540346.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-03-08T20:19:06.493Z,1520540346.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:06.878Z,1520540346.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:06.906Z,1520540346.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-08T20:19:06.907Z,1520540346.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:07.289Z,1520540347.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:07.306Z,1520540347.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-08T20:19:07.307Z,1520540347.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:07.691Z,1520540347.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:07.706Z,1520540347.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T20:19:07.707Z,1520540347.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:08.058Z,1520540348.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:08.081Z,1520540348.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T20:19:08.082Z,1520540348.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:08.463Z,1520540348.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:08.491Z,1520540348.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-08T20:19:08.492Z,1520540348.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:08.863Z,1520540348.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:08.902Z,1520540348.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-08T20:19:08.903Z,1520540348.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:09.271Z,1520540349.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:09.302Z,1520540349.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-08T20:19:09.303Z,1520540349.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:09.671Z,1520540349.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:09.701Z,1520540349.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-08T20:19:09.702Z,1520540349.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:10.089Z,1520540350.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:10.104Z,1520540350.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-08T20:19:10.105Z,1520540350.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:10.493Z,1520540350.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:10.508Z,1520540350.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-08T20:19:10.509Z,1520540350.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:10.892Z,1520540350.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:10.907Z,1520540350.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-08T20:19:10.908Z,1520540350.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:11.275Z,1520540351.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:11.301Z,1520540351.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-08T20:19:11.302Z,1520540351.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:11.660Z,1520540351.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:11.687Z,1520540351.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-08T20:19:11.688Z,1520540351.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:12.068Z,1520540352.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:12.083Z,1520540352.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T20:19:12.084Z,1520540352.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:12.473Z,1520540352.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:12.487Z,1520540352.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-08T20:19:12.488Z,1520540352.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:12.869Z,1520540352.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:12.885Z,1520540352.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T20:19:12.885Z,1520540352.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:13.281Z,1520540353.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:13.304Z,1520540353.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T20:19:13.310Z,1520540353.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:13.681Z,1520540353.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:13.695Z,1520540353.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T20:19:13.721Z,1520540353.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:14.063Z,1520540354.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:14.082Z,1520540354.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T20:19:14.083Z,1520540354.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:14.472Z,1520540354.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:14.488Z,1520540354.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T20:19:14.489Z,1520540354.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:14.866Z,1520540354.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:14.881Z,1520540354.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-08T20:19:14.882Z,1520540354.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:15.271Z,1520540355.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:15.286Z,1520540355.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-08T20:19:15.287Z,1520540355.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:15.670Z,1520540355.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:15.685Z,1520540355.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-08T20:19:15.686Z,1520540355.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:16.073Z,1520540356.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:16.088Z,1520540356.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-08T20:19:16.089Z,1520540356.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:16.485Z,1520540356.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:16.517Z,1520540356.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-08T20:19:16.518Z,1520540356.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:16.877Z,1520540356.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:16.892Z,1520540356.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T20:19:16.893Z,1520540356.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:17.272Z,1520540357.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:17.287Z,1520540357.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-08T20:19:17.288Z,1520540357.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:17.663Z,1520540357.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:17.682Z,1520540357.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T20:19:17.683Z,1520540357.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:18.070Z,1520540358.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:18.085Z,1520540358.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T20:19:18.086Z,1520540358.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:18.465Z,1520540358.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:18.490Z,1520540358.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T20:19:18.491Z,1520540358.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:18.873Z,1520540358.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:18.894Z,1520540358.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T20:19:18.895Z,1520540358.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:19.286Z,1520540359.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:19.300Z,1520540359.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-08T20:19:19.314Z,1520540359.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:19.677Z,1520540359.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:19.698Z,1520540359.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T20:19:19.699Z,1520540359.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:20.060Z,1520540360.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:20.087Z,1520540360.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-08T20:19:20.088Z,1520540360.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:20.475Z,1520540360.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:20.489Z,1520540360.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-08T20:19:20.490Z,1520540360.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:20.876Z,1520540360.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:20.891Z,1520540360.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T20:19:20.892Z,1520540360.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:21.277Z,1520540361.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:21.292Z,1520540361.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T20:19:21.293Z,1520540361.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:21.671Z,1520540361.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:21.690Z,1520540361.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T20:19:21.691Z,1520540361.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:22.082Z,1520540362.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:22.097Z,1520540362.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:22.484Z,1520540362.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:22.499Z,1520540362.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:22.882Z,1520540362.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:22.897Z,1520540362.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:23.276Z,1520540363.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:23.291Z,1520540363.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:23.660Z,1520540363.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:23.689Z,1520540363.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:24.067Z,1520540364.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:24.090Z,1520540364.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:24.471Z,1520540364.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:24.486Z,1520540364.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:24.880Z,1520540364.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:24.896Z,1520540364.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:25.284Z,1520540365.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:25.299Z,1520540365.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:25.684Z,1520540365.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:25.706Z,1520540365.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:26.057Z,1520540366.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:26.084Z,1520540366.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:26.475Z,1520540366.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:26.494Z,1520540366.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:26.884Z,1520540366.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:26.899Z,1520540366.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:27.276Z,1520540367.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:27.291Z,1520540367.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:27.688Z,1520540367.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:27.703Z,1520540367.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:28.089Z,1520540368.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:28.111Z,1520540368.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:28.481Z,1520540368.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:28.496Z,1520540368.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:28.896Z,1520540368.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:28.918Z,1520540368.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:29.267Z,1520540369.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:29.295Z,1520540369.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:29.664Z,1520540369.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:29.734Z,1520540369.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:30.067Z,1520540370.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:30.094Z,1520540370.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:30.463Z,1520540370.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:30.495Z,1520540370.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:30.886Z,1520540370.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:30.902Z,1520540370.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:31.281Z,1520540371.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:31.303Z,1520540371.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:31.695Z,1520540371.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:31.711Z,1520540371.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:32.060Z,1520540372.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:32.075Z,1520540372.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:32.467Z,1520540372.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:32.502Z,1520540372.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:32.863Z,1520540372.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:32.879Z,1520540372.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:33.268Z,1520540373.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:33.283Z,1520540373.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:33.671Z,1520540373.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:33.687Z,1520540373.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:34.085Z,1520540374.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:34.111Z,1520540374.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:34.485Z,1520540374.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:34.509Z,1520540374.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:34.881Z,1520540374.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:34.916Z,1520540374.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:35.268Z,1520540375.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:35.284Z,1520540375.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:35.666Z,1520540375.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:35.682Z,1520540375.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:36.074Z,1520540376.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:36.089Z,1520540376.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:36.468Z,1520540376.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:36.484Z,1520540376.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:36.870Z,1520540376.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:36.885Z,1520540376.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:37.281Z,1520540377.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:37.296Z,1520540377.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:37.685Z,1520540377.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:37.721Z,1520540377.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:38.074Z,1520540378.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:38.089Z,1520540378.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:38.476Z,1520540378.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:38.491Z,1520540378.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:38.875Z,1520540378.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:38.891Z,1520540378.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:39.266Z,1520540379.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:39.286Z,1520540379.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:39.676Z,1520540379.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:39.691Z,1520540379.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:40.077Z,1520540380.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:40.093Z,1520540380.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:40.476Z,1520540380.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:40.492Z,1520540380.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:40.889Z,1520540380.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:40.904Z,1520540380.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:41.277Z,1520540381.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:41.293Z,1520540381.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:41.671Z,1520540381.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:41.686Z,1520540381.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:42.108Z,1520540382.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:42.141Z,1520540382.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:42.476Z,1520540382.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:42.500Z,1520540382.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:42.884Z,1520540382.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:42.912Z,1520540382.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:43.290Z,1520540383.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:43.315Z,1520540383.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:43.692Z,1520540383.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:43.707Z,1520540383.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:44.069Z,1520540384.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:44.117Z,1520540384.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:44.489Z,1520540384.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:44.507Z,1520540384.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:44.867Z,1520540384.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:44.895Z,1520540384.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:45.275Z,1520540385.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:45.319Z,1520540385.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:45.670Z,1520540385.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:45.690Z,1520540385.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:46.085Z,1520540386.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:46.117Z,1520540386.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:46.478Z,1520540386.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:46.493Z,1520540386.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:46.877Z,1520540386.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:46.892Z,1520540386.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:47.273Z,1520540387.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:47.290Z,1520540387.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:47.668Z,1520540387.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:47.694Z,1520540387.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:48.074Z,1520540388.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:48.090Z,1520540388.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:48.475Z,1520540388.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:48.490Z,1520540388.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:48.878Z,1520540388.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:48.894Z,1520540388.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:49.282Z,1520540389.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:49.298Z,1520540389.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:49.682Z,1520540389.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:49.697Z,1520540389.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:50.076Z,1520540390.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:50.091Z,1520540390.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:50.475Z,1520540390.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:50.491Z,1520540390.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:50.876Z,1520540390.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:50.892Z,1520540390.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:51.276Z,1520540391.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:51.291Z,1520540391.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:51.671Z,1520540391.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:51.686Z,1520540391.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:52.081Z,1520540392.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:52.096Z,1520540392.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:52.482Z,1520540392.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:52.497Z,1520540392.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:52.880Z,1520540392.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:52.896Z,1520540392.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:53.276Z,1520540393.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:53.290Z,1520540393.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:53.675Z,1520540393.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:53.694Z,1520540393.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:54.075Z,1520540394.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:54.091Z,1520540394.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:54.475Z,1520540394.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:54.490Z,1520540394.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:54.882Z,1520540394.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:54.897Z,1520540394.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:55.280Z,1520540395.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:55.302Z,1520540395.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:55.681Z,1520540395.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:55.702Z,1520540395.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:56.075Z,1520540396.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:56.094Z,1520540396.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:56.475Z,1520540396.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:56.490Z,1520540396.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:56.868Z,1520540396.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:56.890Z,1520540396.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:57.276Z,1520540397.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:57.291Z,1520540397.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:57.671Z,1520540397.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:57.686Z,1520540397.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:58.081Z,1520540398.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:58.102Z,1520540398.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:58.480Z,1520540398.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:58.502Z,1520540398.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:58.880Z,1520540398.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:58.896Z,1520540398.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:19:59.268Z,1520540399.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:19:59.284Z,1520540399.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:02.546Z,1520540402.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:02.575Z,1520540402.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:02.662Z,1520540402.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:02.702Z,1520540402.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:03.042Z,1520540403.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:03.075Z,1520540403.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:03.441Z,1520540403.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:03.462Z,1520540403.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:03.838Z,1520540403.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:03.863Z,1520540403.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:04.225Z,1520540404.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:04.240Z,1520540404.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:04.624Z,1520540404.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:04.639Z,1520540404.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:05.027Z,1520540405.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:05.043Z,1520540405.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:05.424Z,1520540405.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:05.447Z,1520540405.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:05.833Z,1520540405.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:05.862Z,1520540405.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:06.245Z,1520540406.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:06.271Z,1520540406.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:06.647Z,1520540406.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:06.674Z,1520540406.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:07.030Z,1520540407.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:07.067Z,1520540407.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:07.427Z,1520540407.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:07.443Z,1520540407.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:07.827Z,1520540407.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:07.851Z,1520540407.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:08.232Z,1520540408.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:08.250Z,1520540408.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:08.623Z,1520540408.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:08.651Z,1520540408.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:09.045Z,1520540409.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:09.080Z,1520540409.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:09.437Z,1520540409.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:09.452Z,1520540409.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:09.833Z,1520540409.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:09.853Z,1520540409.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:10.232Z,1520540410.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:10.248Z,1520540410.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:10.631Z,1520540410.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:10.646Z,1520540410.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:11.033Z,1520540411.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:11.048Z,1520540411.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:11.430Z,1520540411.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:11.445Z,1520540411.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:11.837Z,1520540411.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:11.852Z,1520540411.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:12.241Z,1520540412.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:12.257Z,1520540412.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:12.636Z,1520540412.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:12.663Z,1520540412.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:13.033Z,1520540413.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:13.051Z,1520540413.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:13.428Z,1520540413.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:13.443Z,1520540413.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:13.827Z,1520540413.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:13.849Z,1520540413.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:14.227Z,1520540414.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:14.266Z,1520540414.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:14.616Z,1520540414.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:14.656Z,1520540414.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:15.041Z,1520540415.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:15.056Z,1520540415.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:15.440Z,1520540415.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:15.455Z,1520540415.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:15.837Z,1520540415.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:15.873Z,1520540415.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:16.235Z,1520540416.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:16.258Z,1520540416.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:16.635Z,1520540416.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:16.650Z,1520540416.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:17.036Z,1520540417.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:17.052Z,1520540417.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:17.431Z,1520540417.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:17.450Z,1520540417.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:17.845Z,1520540417.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:17.865Z,1520540417.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:18.241Z,1520540418.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:18.291Z,1520540418.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:18.641Z,1520540418.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:18.656Z,1520540418.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:19.035Z,1520540419.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:19.050Z,1520540419.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:19.434Z,1520540419.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:19.458Z,1520540419.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:19.835Z,1520540419.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:19.858Z,1520540419.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:20.232Z,1520540420.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:20.247Z,1520540420.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:20.616Z,1520540420.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:20.651Z,1520540420.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:21.044Z,1520540421.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:21.064Z,1520540421.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:21.444Z,1520540421.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:21.492Z,1520540421.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:21.834Z,1520540421.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:21.861Z,1520540421.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:22.235Z,1520540422.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:22.255Z,1520540422.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:22.624Z,1520540422.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:22.656Z,1520540422.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:23.036Z,1520540423.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:23.051Z,1520540423.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:23.422Z,1520540423.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:23.455Z,1520540423.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:23.849Z,1520540423.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:23.870Z,1520540423.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:24.235Z,1520540424.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:24.260Z,1520540424.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:24.645Z,1520540424.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:24.661Z,1520540424.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:25.023Z,1520540425.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:25.059Z,1520540425.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:25.420Z,1520540425.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:25.447Z,1520540425.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:25.835Z,1520540425.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:25.857Z,1520540425.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:26.224Z,1520540426.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:26.260Z,1520540426.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:26.620Z,1520540426.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:26.660Z,1520540426.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:27.041Z,1520540427.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:27.059Z,1520540427.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:27.448Z,1520540427.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:27.471Z,1520540427.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:27.837Z,1520540427.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:27.871Z,1520540427.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:28.234Z,1520540428.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:28.255Z,1520540428.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:28.623Z,1520540428.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:28.651Z,1520540428.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:29.027Z,1520540429.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:29.059Z,1520540429.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:29.423Z,1520540429.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:29.450Z,1520540429.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:29.846Z,1520540429.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:29.862Z,1520540429.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:30.239Z,1520540430.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:30.262Z,1520540430.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:30.646Z,1520540430.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:30.665Z,1520540430.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:31.023Z,1520540431.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:31.066Z,1520540431.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:31.427Z,1520540431.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:31.458Z,1520540431.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:31.823Z,1520540431.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:31.849Z,1520540431.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:32.224Z,1520540432.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:32.262Z,1520540432.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:32.619Z,1520540432.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:32.651Z,1520540432.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:33.046Z,1520540433.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:33.061Z,1520540433.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:33.450Z,1520540433.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:33.471Z,1520540433.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:33.846Z,1520540433.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:33.865Z,1520540433.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:34.223Z,1520540434.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:34.258Z,1520540434.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:34.623Z,1520540434.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:34.655Z,1520540434.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:35.027Z,1520540435.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:35.062Z,1520540435.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:35.423Z,1520540435.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:35.463Z,1520540435.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:35.846Z,1520540435.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:35.862Z,1520540435.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:36.246Z,1520540436.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:36.262Z,1520540436.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:36.633Z,1520540436.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:36.677Z,1520540436.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:37.025Z,1520540437.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:37.057Z,1520540437.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:37.427Z,1520540437.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:37.469Z,1520540437.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:37.824Z,1520540437.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:37.839Z,1520540437.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:38.230Z,1520540438.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:38.245Z,1520540438.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:38.631Z,1520540438.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:38.671Z,1520540438.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:39.042Z,1520540439.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:39.076Z,1520540439.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:39.445Z,1520540439.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:39.485Z,1520540439.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:39.845Z,1520540439.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:39.879Z,1520540439.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:40.236Z,1520540440.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:40.257Z,1520540440.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:40.635Z,1520540440.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:40.651Z,1520540440.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:41.036Z,1520540441.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:41.052Z,1520540441.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:41.431Z,1520540441.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:41.454Z,1520540441.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:41.842Z,1520540441.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:41.862Z,1520540441.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:42.240Z,1520540442.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:42.255Z,1520540442.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:42.641Z,1520540442.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:42.657Z,1520540442.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:43.036Z,1520540443.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:43.052Z,1520540443.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:43.436Z,1520540443.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:43.457Z,1520540443.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:43.837Z,1520540443.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:43.852Z,1520540443.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:44.233Z,1520540444.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:44.247Z,1520540444.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:44.623Z,1520540444.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:44.646Z,1520540444.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:45.041Z,1520540445.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:45.061Z,1520540445.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:45.441Z,1520540445.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:45.456Z,1520540445.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:45.841Z,1520540445.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:45.862Z,1520540445.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:46.235Z,1520540446.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:46.251Z,1520540446.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:46.636Z,1520540446.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:46.657Z,1520540446.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:47.036Z,1520540447.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:47.051Z,1520540447.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:47.427Z,1520540447.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:47.449Z,1520540447.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:47.844Z,1520540447.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:47.866Z,1520540447.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:48.244Z,1520540448.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:48.263Z,1520540448.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:48.645Z,1520540448.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:48.666Z,1520540448.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:49.035Z,1520540449.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:49.050Z,1520540449.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:49.435Z,1520540449.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:49.450Z,1520540449.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:49.822Z,1520540449.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:49.861Z,1520540449.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:50.236Z,1520540450.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:50.251Z,1520540450.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:50.635Z,1520540450.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:50.658Z,1520540450.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:51.045Z,1520540451.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:51.069Z,1520540451.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:51.447Z,1520540451.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:51.466Z,1520540451.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:51.845Z,1520540451.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:51.895Z,1520540451.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:52.234Z,1520540452.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:52.250Z,1520540452.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:52.619Z,1520540452.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:52.647Z,1520540452.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:53.035Z,1520540453.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:53.056Z,1520540453.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:53.423Z,1520540453.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:53.455Z,1520540453.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:53.846Z,1520540453.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:53.861Z,1520540453.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:54.245Z,1520540454.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:54.269Z,1520540454.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:54.637Z,1520540454.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:54.658Z,1520540454.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:55.030Z,1520540455.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:55.045Z,1520540455.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:55.432Z,1520540455.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:55.448Z,1520540455.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:55.830Z,1520540455.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:55.846Z,1520540455.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:56.232Z,1520540456.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:56.249Z,1520540456.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:56.631Z,1520540456.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:56.654Z,1520540456.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:57.045Z,1520540457.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:57.060Z,1520540457.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:57.441Z,1520540457.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:57.459Z,1520540457.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:57.837Z,1520540457.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:57.858Z,1520540457.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:58.234Z,1520540458.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:58.249Z,1520540458.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:58.631Z,1520540458.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:58.646Z,1520540458.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:59.030Z,1520540459.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:59.049Z,1520540459.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:20:59.431Z,1520540459.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:20:59.447Z,1520540459.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:02.553Z,1520540462.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:02.586Z,1520540462.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:02.686Z,1520540462.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:02.701Z,1520540462.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:03.053Z,1520540463.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:03.089Z,1520540463.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:03.443Z,1520540463.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:03.457Z,1520540463.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:03.842Z,1520540463.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:03.861Z,1520540463.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:04.244Z,1520540464.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:04.265Z,1520540464.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:04.644Z,1520540464.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:04.671Z,1520540464.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:05.049Z,1520540465.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:05.065Z,1520540465.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:05.449Z,1520540465.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:05.469Z,1520540465.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:05.850Z,1520540465.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:05.868Z,1520540465.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:06.244Z,1520540466.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:06.289Z,1520540466.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:06.646Z,1520540466.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:06.661Z,1520540466.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:07.047Z,1520540467.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:07.075Z,1520540467.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:07.445Z,1520540467.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:07.481Z,1520540467.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:07.856Z,1520540467.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:07.909Z,1520540467.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:08.257Z,1520540468.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:08.280Z,1520540468.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:08.659Z,1520540468.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:08.677Z,1520540468.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:09.038Z,1520540469.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:09.079Z,1520540469.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:09.439Z,1520540469.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:09.475Z,1520540469.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:09.836Z,1520540469.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:09.876Z,1520540469.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:10.235Z,1520540470.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:10.270Z,1520540470.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:10.638Z,1520540470.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:10.671Z,1520540470.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:11.057Z,1520540471.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:11.094Z,1520540471.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:11.461Z,1520540471.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:11.481Z,1520540471.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:11.855Z,1520540471.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:11.875Z,1520540471.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:12.239Z,1520540472.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:12.269Z,1520540472.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:12.634Z,1520540472.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:12.667Z,1520540472.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:13.039Z,1520540473.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:13.070Z,1520540473.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:13.439Z,1520540473.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:13.470Z,1520540473.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:13.857Z,1520540473.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:13.885Z,1520540473.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:14.262Z,1520540474.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:14.290Z,1520540474.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:14.653Z,1520540474.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:14.687Z,1520540474.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:15.044Z,1520540475.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:15.063Z,1520540475.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:15.441Z,1520540475.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:15.461Z,1520540475.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:15.845Z,1520540475.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:15.864Z,1520540475.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:16.245Z,1520540476.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:16.260Z,1520540476.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:16.645Z,1520540476.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:16.665Z,1520540476.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:17.051Z,1520540477.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:17.069Z,1520540477.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:17.453Z,1520540477.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:17.495Z,1520540477.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:17.850Z,1520540477.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:17.865Z,1520540477.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:18.247Z,1520540478.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:18.268Z,1520540478.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:18.650Z,1520540478.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:18.668Z,1520540478.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:19.049Z,1520540479.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:19.092Z,1520540479.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:19.444Z,1520540479.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:19.459Z,1520540479.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:19.849Z,1520540479.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:19.870Z,1520540479.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:20.256Z,1520540480.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:20.271Z,1520540480.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:20.650Z,1520540480.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:20.694Z,1520540480.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:21.047Z,1520540481.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:21.062Z,1520540481.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:21.449Z,1520540481.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:21.469Z,1520540481.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:21.832Z,1520540481.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:21.866Z,1520540481.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:22.248Z,1520540482.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:22.263Z,1520540482.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:22.646Z,1520540482.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:22.662Z,1520540482.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:23.048Z,1520540483.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:23.069Z,1520540483.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:23.456Z,1520540483.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:23.472Z,1520540483.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:23.849Z,1520540483.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:23.898Z,1520540483.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:24.241Z,1520540484.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:24.257Z,1520540484.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:24.643Z,1520540484.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:24.662Z,1520540484.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:25.044Z,1520540485.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:25.064Z,1520540485.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:25.446Z,1520540485.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:25.462Z,1520540485.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:25.849Z,1520540485.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:25.866Z,1520540485.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:26.249Z,1520540486.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:26.270Z,1520540486.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:26.650Z,1520540486.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:26.667Z,1520540486.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:27.043Z,1520540487.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:27.074Z,1520540487.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:27.447Z,1520540487.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:27.462Z,1520540487.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:27.837Z,1520540487.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:27.855Z,1520540487.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:28.239Z,1520540488.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:28.273Z,1520540488.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:28.647Z,1520540488.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:28.662Z,1520540488.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:29.053Z,1520540489.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:29.072Z,1520540489.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:29.456Z,1520540489.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:29.475Z,1520540489.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:29.859Z,1520540489.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:29.874Z,1520540489.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:30.247Z,1520540490.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:30.299Z,1520540490.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:30.642Z,1520540490.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:30.662Z,1520540490.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:31.048Z,1520540491.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:31.069Z,1520540491.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:31.448Z,1520540491.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:31.466Z,1520540491.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:31.853Z,1520540491.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:31.898Z,1520540491.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:32.256Z,1520540492.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:32.278Z,1520540492.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:32.649Z,1520540492.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:32.670Z,1520540492.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:33.042Z,1520540493.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:33.072Z,1520540493.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:33.443Z,1520540493.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:33.471Z,1520540493.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:33.832Z,1520540493.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:33.862Z,1520540493.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:34.248Z,1520540494.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:34.268Z,1520540494.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:34.649Z,1520540494.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:34.667Z,1520540494.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:35.053Z,1520540495.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:35.096Z,1520540495.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:35.456Z,1520540495.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:35.476Z,1520540495.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:35.859Z,1520540495.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:35.877Z,1520540495.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:36.248Z,1520540496.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:36.266Z,1520540496.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:36.646Z,1520540496.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:36.682Z,1520540496.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:37.048Z,1520540497.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:37.069Z,1520540497.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:37.446Z,1520540497.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:37.469Z,1520540497.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:37.819Z,1520540497.819 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T20:21:37.819Z,1520540497.819 [NAL9602] Data Fault, FailCount= 5
2018-03-08T20:21:37.819Z,1520540497.819 [NAL9602](ERROR): Data Fault
2018-03-08T20:21:37.846Z,1520540497.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:37.878Z,1520540497.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:37.906Z,1520540497.906 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T20:21:37.906Z,1520540497.906 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-08T20:21:38.214Z,1520540498.214 [NAL9602](INFO): Powering down
2018-03-08T20:21:38.231Z,1520540498.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:38.287Z,1520540498.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:38.311Z,1520540498.311 [CBIT](INFO): Critical error at 20180308T202137
2018-03-08T20:21:38.628Z,1520540498.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:38.668Z,1520540498.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:39.038Z,1520540499.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:39.069Z,1520540499.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:39.430Z,1520540499.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:39.467Z,1520540499.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:39.831Z,1520540499.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:39.866Z,1520540499.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:40.238Z,1520540500.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:40.264Z,1520540500.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:40.630Z,1520540500.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:40.667Z,1520540500.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:41.031Z,1520540501.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:41.062Z,1520540501.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:41.433Z,1520540501.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:41.465Z,1520540501.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:41.844Z,1520540501.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:41.886Z,1520540501.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:42.236Z,1520540502.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:42.296Z,1520540502.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:42.645Z,1520540502.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:42.683Z,1520540502.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:43.033Z,1520540503.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:43.067Z,1520540503.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:43.435Z,1520540503.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:43.485Z,1520540503.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:43.834Z,1520540503.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:43.882Z,1520540503.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:44.245Z,1520540504.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:44.277Z,1520540504.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:44.634Z,1520540504.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:44.686Z,1520540504.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:45.033Z,1520540505.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:45.048Z,1520540505.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:45.435Z,1520540505.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:45.511Z,1520540505.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:45.834Z,1520540505.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:45.854Z,1520540505.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:46.242Z,1520540506.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:46.285Z,1520540506.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:46.643Z,1520540506.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:46.658Z,1520540506.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:47.035Z,1520540507.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:47.050Z,1520540507.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:47.443Z,1520540507.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:47.463Z,1520540507.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:47.841Z,1520540507.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:47.855Z,1520540507.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:48.243Z,1520540508.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:48.258Z,1520540508.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:48.643Z,1520540508.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:48.662Z,1520540508.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:49.037Z,1520540509.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:49.058Z,1520540509.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:49.444Z,1520540509.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:49.459Z,1520540509.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:49.840Z,1520540509.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:49.864Z,1520540509.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:50.245Z,1520540510.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:50.265Z,1520540510.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:50.635Z,1520540510.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:50.656Z,1520540510.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:51.042Z,1520540511.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:51.057Z,1520540511.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:51.436Z,1520540511.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:51.464Z,1520540511.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:51.835Z,1520540511.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:51.854Z,1520540511.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:52.246Z,1520540512.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:52.266Z,1520540512.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:52.645Z,1520540512.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:52.671Z,1520540512.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:53.035Z,1520540513.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:53.051Z,1520540513.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:53.436Z,1520540513.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:53.476Z,1520540513.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:53.846Z,1520540513.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:53.865Z,1520540513.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:54.239Z,1520540514.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:54.294Z,1520540514.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:54.640Z,1520540514.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:54.663Z,1520540514.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:55.046Z,1520540515.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:55.067Z,1520540515.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:55.448Z,1520540515.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:55.467Z,1520540515.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:55.850Z,1520540515.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:55.956Z,1520540515.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:56.237Z,1520540516.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:56.263Z,1520540516.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:56.638Z,1520540516.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:56.663Z,1520540516.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:57.043Z,1520540517.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:57.062Z,1520540517.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:57.439Z,1520540517.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:57.454Z,1520540517.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:57.843Z,1520540517.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:57.859Z,1520540517.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:58.243Z,1520540518.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:58.262Z,1520540518.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:58.654Z,1520540518.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:58.692Z,1520540518.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:59.030Z,1520540519.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:59.070Z,1520540519.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:21:59.105Z,1520540519.105 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T20:21:59.447Z,1520540519.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:21:59.463Z,1520540519.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:02.598Z,1520540522.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:02.613Z,1520540522.613 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:02.613Z,1520540522.613 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 252
2018-03-08T20:22:02.613Z,1520540522.613 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T20:22:02.615Z,1520540522.615 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:02.615Z,1520540522.615 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 252
2018-03-08T20:22:02.615Z,1520540522.615 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T20:22:02.617Z,1520540522.617 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:02.617Z,1520540522.617 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 252
2018-03-08T20:22:02.617Z,1520540522.617 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T20:22:02.629Z,1520540522.629 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T20:22:02.629Z,1520540522.629 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T20:22:02.629Z,1520540522.629 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T20:22:02.719Z,1520540522.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:02.777Z,1520540522.777 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T20:22:02.777Z,1520540522.777 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 252
2018-03-08T20:22:02.778Z,1520540522.778 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T20:22:02.778Z,1520540522.778 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 252
2018-03-08T20:22:02.778Z,1520540522.778 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T20:22:02.779Z,1520540522.779 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 252
2018-03-08T20:22:03.082Z,1520540523.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:03.111Z,1520540523.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T20:22:03.112Z,1520540523.112 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:22:03.112Z,1520540523.112 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:22:03.113Z,1520540523.113 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T20:22:03.113Z,1520540523.113 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:22:03.113Z,1520540523.113 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:22:03.114Z,1520540523.114 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T20:22:03.114Z,1520540523.114 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:22:03.115Z,1520540523.115 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:22:03.475Z,1520540523.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:03.489Z,1520540523.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-03-08T20:22:03.490Z,1520540523.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:03.870Z,1520540523.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:03.913Z,1520540523.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-03-08T20:22:03.914Z,1520540523.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:04.272Z,1520540524.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:04.313Z,1520540524.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-03-08T20:22:04.314Z,1520540524.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:04.668Z,1520540524.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:04.695Z,1520540524.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-03-08T20:22:04.696Z,1520540524.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:05.070Z,1520540525.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:05.087Z,1520540525.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-03-08T20:22:05.088Z,1520540525.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:05.464Z,1520540525.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:05.495Z,1520540525.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-03-08T20:22:05.496Z,1520540525.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:05.876Z,1520540525.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:05.891Z,1520540525.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-03-08T20:22:05.893Z,1520540525.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:06.279Z,1520540526.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:06.294Z,1520540526.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-08T20:22:06.295Z,1520540526.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:06.676Z,1520540526.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:06.691Z,1520540526.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-03-08T20:22:06.692Z,1520540526.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:07.065Z,1520540527.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:07.094Z,1520540527.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-03-08T20:22:07.095Z,1520540527.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:07.477Z,1520540527.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:07.492Z,1520540527.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-08T20:22:07.493Z,1520540527.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:07.872Z,1520540527.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:07.902Z,1520540527.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-08T20:22:07.903Z,1520540527.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:08.276Z,1520540528.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:08.291Z,1520540528.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T20:22:08.291Z,1520540528.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:08.667Z,1520540528.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:08.702Z,1520540528.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T20:22:08.703Z,1520540528.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:09.076Z,1520540529.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:09.091Z,1520540529.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-08T20:22:09.092Z,1520540529.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:09.479Z,1520540529.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:09.493Z,1520540529.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-08T20:22:09.494Z,1520540529.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:09.876Z,1520540529.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:09.892Z,1520540529.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-08T20:22:09.893Z,1520540529.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:10.270Z,1520540530.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:10.302Z,1520540530.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-08T20:22:10.303Z,1520540530.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:10.673Z,1520540530.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:10.699Z,1520540530.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-08T20:22:10.699Z,1520540530.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:11.056Z,1520540531.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:11.086Z,1520540531.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-08T20:22:11.087Z,1520540531.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:11.471Z,1520540531.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:11.494Z,1520540531.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-08T20:22:11.495Z,1520540531.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:11.874Z,1520540531.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:11.903Z,1520540531.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-08T20:22:11.904Z,1520540531.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:12.276Z,1520540532.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:12.322Z,1520540532.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-08T20:22:12.323Z,1520540532.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:12.675Z,1520540532.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:12.690Z,1520540532.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T20:22:12.691Z,1520540532.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:13.076Z,1520540533.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:13.091Z,1520540533.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-08T20:22:13.092Z,1520540533.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:13.467Z,1520540533.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:13.502Z,1520540533.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T20:22:13.503Z,1520540533.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:13.877Z,1520540533.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:13.891Z,1520540533.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T20:22:13.892Z,1520540533.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:14.278Z,1520540534.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:14.293Z,1520540534.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T20:22:14.294Z,1520540534.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:14.670Z,1520540534.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:14.686Z,1520540534.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T20:22:14.687Z,1520540534.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:15.068Z,1520540535.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:15.102Z,1520540535.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T20:22:15.103Z,1520540535.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:15.469Z,1520540535.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:15.486Z,1520540535.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-08T20:22:15.487Z,1520540535.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:15.861Z,1520540535.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:15.897Z,1520540535.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-08T20:22:15.898Z,1520540535.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:16.276Z,1520540536.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:16.291Z,1520540536.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-08T20:22:16.291Z,1520540536.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:16.674Z,1520540536.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:16.703Z,1520540536.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-08T20:22:16.704Z,1520540536.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:17.055Z,1520540537.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:17.102Z,1520540537.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-08T20:22:17.103Z,1520540537.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:17.475Z,1520540537.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:17.489Z,1520540537.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T20:22:17.490Z,1520540537.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:17.876Z,1520540537.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:17.891Z,1520540537.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-08T20:22:17.892Z,1520540537.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:18.274Z,1520540538.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:18.310Z,1520540538.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T20:22:18.311Z,1520540538.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:18.677Z,1520540538.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:18.703Z,1520540538.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T20:22:18.704Z,1520540538.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:19.074Z,1520540539.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:19.089Z,1520540539.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T20:22:19.090Z,1520540539.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:19.477Z,1520540539.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:19.492Z,1520540539.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T20:22:19.493Z,1520540539.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:19.873Z,1520540539.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:19.914Z,1520540539.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-08T20:22:19.914Z,1520540539.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:20.276Z,1520540540.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:20.314Z,1520540540.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T20:22:20.315Z,1520540540.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:20.667Z,1520540540.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:20.682Z,1520540540.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-08T20:22:20.683Z,1520540540.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:21.073Z,1520540541.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:21.088Z,1520540541.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-08T20:22:21.089Z,1520540541.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:21.473Z,1520540541.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:21.515Z,1520540541.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T20:22:21.516Z,1520540541.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:21.863Z,1520540541.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:21.898Z,1520540541.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T20:22:21.899Z,1520540541.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:22.277Z,1520540542.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:22.313Z,1520540542.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T20:22:22.314Z,1520540542.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:22.675Z,1520540542.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:22.690Z,1520540542.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:23.063Z,1520540543.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:23.098Z,1520540543.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:23.475Z,1520540543.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:23.491Z,1520540543.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:23.878Z,1520540543.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:23.893Z,1520540543.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:24.270Z,1520540544.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:24.286Z,1520540544.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:24.673Z,1520540544.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:24.714Z,1520540544.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:25.074Z,1520540545.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:25.118Z,1520540545.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:25.466Z,1520540545.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:25.490Z,1520540545.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:25.875Z,1520540545.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:25.889Z,1520540545.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:26.274Z,1520540546.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:26.295Z,1520540546.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:26.669Z,1520540546.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:26.687Z,1520540546.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:27.075Z,1520540547.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:27.090Z,1520540547.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:27.477Z,1520540547.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:27.492Z,1520540547.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:27.855Z,1520540547.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:27.898Z,1520540547.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:28.276Z,1520540548.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:28.291Z,1520540548.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:28.670Z,1520540548.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:28.693Z,1520540548.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:29.069Z,1520540549.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:29.085Z,1520540549.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:29.469Z,1520540549.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:29.502Z,1520540549.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:29.874Z,1520540549.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:29.919Z,1520540549.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:30.279Z,1520540550.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:30.294Z,1520540550.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:30.676Z,1520540550.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:30.691Z,1520540550.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:31.070Z,1520540551.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:31.119Z,1520540551.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:31.477Z,1520540551.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:31.515Z,1520540551.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:31.882Z,1520540551.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:31.897Z,1520540551.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:32.277Z,1520540552.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:32.292Z,1520540552.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:32.674Z,1520540552.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:32.715Z,1520540552.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:33.079Z,1520540553.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:33.103Z,1520540553.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:33.477Z,1520540553.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:33.492Z,1520540553.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:33.868Z,1520540553.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:33.885Z,1520540553.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:34.270Z,1520540554.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:34.295Z,1520540554.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:34.677Z,1520540554.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:34.716Z,1520540554.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:35.066Z,1520540555.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:35.089Z,1520540555.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:35.473Z,1520540555.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:35.487Z,1520540555.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:35.875Z,1520540555.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:35.896Z,1520540555.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:36.277Z,1520540556.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:36.292Z,1520540556.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:36.681Z,1520540556.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:36.695Z,1520540556.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:37.072Z,1520540557.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:37.094Z,1520540557.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:37.475Z,1520540557.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:37.494Z,1520540557.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:37.879Z,1520540557.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:37.893Z,1520540557.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:38.277Z,1520540558.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:38.293Z,1520540558.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:38.679Z,1520540558.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:38.694Z,1520540558.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:39.071Z,1520540559.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:39.099Z,1520540559.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:39.475Z,1520540559.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:39.516Z,1520540559.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:39.880Z,1520540559.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:39.895Z,1520540559.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:40.279Z,1520540560.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:40.293Z,1520540560.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:40.655Z,1520540560.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:40.692Z,1520540560.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:41.067Z,1520540561.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:41.091Z,1520540561.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:41.482Z,1520540561.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:41.497Z,1520540561.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:41.865Z,1520540561.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:41.883Z,1520540561.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:42.265Z,1520540562.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:42.302Z,1520540562.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:42.677Z,1520540562.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:42.693Z,1520540562.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:43.072Z,1520540563.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:43.089Z,1520540563.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:43.470Z,1520540563.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:43.494Z,1520540563.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:43.862Z,1520540563.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:43.903Z,1520540563.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:44.266Z,1520540564.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:44.307Z,1520540564.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:44.677Z,1520540564.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:44.692Z,1520540564.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:45.065Z,1520540565.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:45.090Z,1520540565.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:45.458Z,1520540565.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:45.495Z,1520540565.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:45.858Z,1520540565.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:45.901Z,1520540565.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:46.277Z,1520540566.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:46.292Z,1520540566.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:46.662Z,1520540566.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:46.688Z,1520540566.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:47.066Z,1520540567.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:47.097Z,1520540567.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:47.462Z,1520540567.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:47.491Z,1520540567.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:47.861Z,1520540567.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:47.899Z,1520540567.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:48.277Z,1520540568.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:48.293Z,1520540568.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:48.662Z,1520540568.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:48.706Z,1520540568.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:49.055Z,1520540569.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:49.096Z,1520540569.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:49.478Z,1520540569.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:49.493Z,1520540569.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:49.865Z,1520540569.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:49.890Z,1520540569.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:50.266Z,1520540570.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:50.299Z,1520540570.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:50.666Z,1520540570.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:50.697Z,1520540570.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:51.077Z,1520540571.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:51.092Z,1520540571.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:51.462Z,1520540571.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:51.489Z,1520540571.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:51.866Z,1520540571.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:51.897Z,1520540571.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:52.258Z,1520540572.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:52.293Z,1520540572.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:52.655Z,1520540572.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:52.694Z,1520540572.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:53.077Z,1520540573.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:53.093Z,1520540573.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:53.462Z,1520540573.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:53.506Z,1520540573.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:53.855Z,1520540573.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:53.890Z,1520540573.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:54.266Z,1520540574.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:54.292Z,1520540574.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:54.665Z,1520540574.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:54.690Z,1520540574.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:55.059Z,1520540575.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:55.094Z,1520540575.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:55.466Z,1520540575.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:55.497Z,1520540575.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:55.867Z,1520540575.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:55.898Z,1520540575.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:56.262Z,1520540576.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:56.288Z,1520540576.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:56.666Z,1520540576.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:56.697Z,1520540576.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:57.062Z,1520540577.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:57.092Z,1520540577.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:57.461Z,1520540577.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:57.490Z,1520540577.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:57.877Z,1520540577.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:57.893Z,1520540577.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:58.262Z,1520540578.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:58.306Z,1520540578.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:58.655Z,1520540578.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:58.696Z,1520540578.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:59.067Z,1520540579.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:59.098Z,1520540579.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:22:59.465Z,1520540579.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:22:59.490Z,1520540579.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:02.585Z,1520540582.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:02.600Z,1520540582.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:02.696Z,1520540582.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:02.712Z,1520540582.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:03.054Z,1520540583.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:03.102Z,1520540583.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:03.448Z,1520540583.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:03.463Z,1520540583.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:03.850Z,1520540583.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:03.871Z,1520540583.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:04.257Z,1520540584.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:04.298Z,1520540584.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:04.646Z,1520540584.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:04.672Z,1520540584.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:05.051Z,1520540585.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:05.075Z,1520540585.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:05.455Z,1520540585.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:05.475Z,1520540585.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:05.848Z,1520540585.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:05.867Z,1520540585.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:06.251Z,1520540586.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:06.294Z,1520540586.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:06.651Z,1520540586.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:06.675Z,1520540586.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:07.050Z,1520540587.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:07.070Z,1520540587.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:07.458Z,1520540587.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:07.478Z,1520540587.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:07.852Z,1520540587.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:07.895Z,1520540587.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:08.251Z,1520540588.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:08.266Z,1520540588.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:08.655Z,1520540588.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:08.675Z,1520540588.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:09.057Z,1520540589.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:09.072Z,1520540589.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:09.455Z,1520540589.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:09.502Z,1520540589.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:09.855Z,1520540589.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:09.875Z,1520540589.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:10.255Z,1520540590.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:10.275Z,1520540590.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:10.653Z,1520540590.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:10.670Z,1520540590.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:11.052Z,1520540591.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:11.095Z,1520540591.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:11.455Z,1520540591.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:11.504Z,1520540591.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:11.853Z,1520540591.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:11.873Z,1520540591.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:12.258Z,1520540592.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:12.311Z,1520540592.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:12.658Z,1520540592.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:12.698Z,1520540592.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:13.057Z,1520540593.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:13.083Z,1520540593.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:13.457Z,1520540593.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:13.488Z,1520540593.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:13.861Z,1520540593.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:13.882Z,1520540593.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:14.260Z,1520540594.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:14.302Z,1520540594.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:14.658Z,1520540594.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:14.679Z,1520540594.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:15.061Z,1520540595.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:15.079Z,1520540595.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:15.464Z,1520540595.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:15.479Z,1520540595.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:15.840Z,1520540595.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:15.889Z,1520540595.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:16.257Z,1520540596.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:16.278Z,1520540596.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:16.661Z,1520540596.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:16.679Z,1520540596.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:17.045Z,1520540597.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:17.082Z,1520540597.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:17.460Z,1520540597.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:17.506Z,1520540597.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:17.860Z,1520540597.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:17.880Z,1520540597.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:18.261Z,1520540598.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:18.279Z,1520540598.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:18.658Z,1520540598.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:18.687Z,1520540598.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:19.059Z,1520540599.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:19.090Z,1520540599.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:19.440Z,1520540599.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:19.478Z,1520540599.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:19.858Z,1520540599.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:19.883Z,1520540599.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:20.262Z,1520540600.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:20.278Z,1520540600.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:20.643Z,1520540600.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:20.691Z,1520540600.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:21.057Z,1520540601.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:21.079Z,1520540601.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:21.459Z,1520540601.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:21.477Z,1520540601.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:21.844Z,1520540601.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:21.881Z,1520540601.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:22.250Z,1520540602.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:22.295Z,1520540602.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:22.650Z,1520540602.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:22.681Z,1520540602.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:23.043Z,1520540603.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:23.082Z,1520540603.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:23.452Z,1520540603.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:23.481Z,1520540603.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:23.848Z,1520540603.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:23.894Z,1520540603.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:24.246Z,1520540604.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:24.289Z,1520540604.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:24.650Z,1520540604.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:24.687Z,1520540604.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:25.052Z,1520540605.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:25.087Z,1520540605.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:25.443Z,1520540605.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:25.491Z,1520540605.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:25.847Z,1520540605.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:25.864Z,1520540605.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:26.250Z,1520540606.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:26.286Z,1520540606.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:26.641Z,1520540606.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:26.661Z,1520540606.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:27.051Z,1520540607.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:27.066Z,1520540607.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:27.451Z,1520540607.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:27.465Z,1520540607.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:27.847Z,1520540607.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:27.867Z,1520540607.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:28.257Z,1520540608.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:28.273Z,1520540608.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:28.652Z,1520540608.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:28.700Z,1520540608.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:29.047Z,1520540609.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:29.062Z,1520540609.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:29.466Z,1520540609.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:29.482Z,1520540609.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:29.862Z,1520540609.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:29.877Z,1520540609.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:30.257Z,1520540610.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:30.291Z,1520540610.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:30.654Z,1520540610.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:30.673Z,1520540610.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:31.049Z,1520540611.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:31.074Z,1520540611.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:31.462Z,1520540611.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:31.477Z,1520540611.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:31.854Z,1520540611.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:31.889Z,1520540611.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:32.257Z,1520540612.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:32.278Z,1520540612.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:32.640Z,1520540612.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:32.674Z,1520540612.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:33.050Z,1520540613.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:33.077Z,1520540613.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:33.454Z,1520540613.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:33.482Z,1520540613.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:33.843Z,1520540613.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:33.886Z,1520540613.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:34.260Z,1520540614.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:34.278Z,1520540614.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:34.646Z,1520540614.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:34.682Z,1520540614.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:35.040Z,1520540615.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:35.067Z,1520540615.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:35.446Z,1520540615.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:35.485Z,1520540615.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:35.859Z,1520540615.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:35.877Z,1520540615.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:36.262Z,1520540616.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:36.277Z,1520540616.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:36.646Z,1520540616.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:36.689Z,1520540616.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:37.057Z,1520540617.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:37.078Z,1520540617.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:37.459Z,1520540617.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:37.479Z,1520540617.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:37.845Z,1520540617.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:37.883Z,1520540617.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:37.908Z,1520540617.908 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T20:23:37.908Z,1520540617.908 [NAL9602] No Fault, FailCount= 5
2018-03-08T20:23:38.234Z,1520540618.234 [NAL9602](INFO): Powering up NAL9602
2018-03-08T20:23:38.251Z,1520540618.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:38.302Z,1520540618.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:38.640Z,1520540618.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:38.663Z,1520540618.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:39.046Z,1520540619.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:39.083Z,1520540619.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:39.452Z,1520540619.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:39.481Z,1520540619.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:39.844Z,1520540619.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:39.891Z,1520540619.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:40.251Z,1520540620.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:40.292Z,1520540620.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:40.650Z,1520540620.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:40.685Z,1520540620.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:41.040Z,1520540621.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:41.060Z,1520540621.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:41.450Z,1520540621.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:41.491Z,1520540621.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:41.850Z,1520540621.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:41.894Z,1520540621.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:42.248Z,1520540622.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:42.291Z,1520540622.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:42.652Z,1520540622.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:42.685Z,1520540622.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:43.056Z,1520540623.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:43.092Z,1520540623.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:43.470Z,1520540623.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:43.506Z,1520540623.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:43.867Z,1520540623.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:43.899Z,1520540623.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:44.258Z,1520540624.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:44.275Z,1520540624.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:44.647Z,1520540624.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:44.698Z,1520540624.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:45.059Z,1520540625.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:45.079Z,1520540625.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:45.455Z,1520540625.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:45.475Z,1520540625.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:45.870Z,1520540625.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:45.916Z,1520540625.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:46.255Z,1520540626.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:46.298Z,1520540626.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:46.650Z,1520540626.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:46.665Z,1520540626.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:47.040Z,1520540627.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:47.056Z,1520540627.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:47.449Z,1520540627.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:47.468Z,1520540627.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:47.846Z,1520540627.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:47.871Z,1520540627.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:48.250Z,1520540628.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:48.265Z,1520540628.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:48.672Z,1520540628.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:48.757Z,1520540628.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:49.060Z,1520540629.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:49.075Z,1520540629.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:49.434Z,1520540629.434 [NAL9602](INFO): NAL9602 initialized
2018-03-08T20:23:49.451Z,1520540629.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:49.487Z,1520540629.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:49.885Z,1520540629.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:49.929Z,1520540629.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:50.262Z,1520540630.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:50.279Z,1520540630.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:50.665Z,1520540630.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:50.680Z,1520540630.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:51.058Z,1520540631.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:51.097Z,1520540631.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:51.447Z,1520540631.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:51.466Z,1520540631.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:51.847Z,1520540631.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:51.867Z,1520540631.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:52.261Z,1520540632.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:52.294Z,1520540632.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:52.658Z,1520540632.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:52.695Z,1520540632.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:53.061Z,1520540633.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:53.091Z,1520540633.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:53.471Z,1520540633.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:53.496Z,1520540633.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:53.868Z,1520540633.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:53.898Z,1520540633.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:54.253Z,1520540634.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:54.302Z,1520540634.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:54.657Z,1520540634.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:54.678Z,1520540634.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:55.073Z,1520540635.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:55.105Z,1520540635.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:55.460Z,1520540635.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:55.482Z,1520540635.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:55.864Z,1520540635.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:55.949Z,1520540635.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:56.257Z,1520540636.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:56.283Z,1520540636.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:56.655Z,1520540636.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:56.675Z,1520540636.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:57.064Z,1520540637.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:57.081Z,1520540637.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:57.465Z,1520540637.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:57.499Z,1520540637.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:57.856Z,1520540637.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:57.886Z,1520540637.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:58.263Z,1520540638.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:58.280Z,1520540638.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:58.667Z,1520540638.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:58.682Z,1520540638.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:59.065Z,1520540639.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:59.113Z,1520540639.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:59.115Z,1520540639.115 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T20:23:59.116Z,1520540639.116 [Default:CheckIn:C.Wait] Stopped
2018-03-08T20:23:59.116Z,1520540639.116 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T20:23:59.116Z,1520540639.116 [Default:CheckIn:D] Running Loop=1
2018-03-08T20:23:59.471Z,1520540639.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:59.489Z,1520540639.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:59.492Z,1520540639.492 [Default:CheckIn:D] Stopped
2018-03-08T20:23:59.492Z,1520540639.492 [Default:CheckIn:E] Running Loop=1
2018-03-08T20:23:59.871Z,1520540639.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:23:59.886Z,1520540639.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:23:59.889Z,1520540639.889 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 758.244792 min 
2018-03-08T20:23:59.890Z,1520540639.890 [Default:CheckIn:E] Stopped
2018-03-08T20:23:59.890Z,1520540639.890 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T20:23:59.890Z,1520540639.890 [Default:CheckIn] Stopped
2018-03-08T20:23:59.890Z,1520540639.890 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T20:23:59.890Z,1520540639.890 [Default:CheckIn](INFO): Running loop #74
2018-03-08T20:23:59.890Z,1520540639.890 [Default:CheckIn] Running Loop=74
2018-03-08T20:23:59.890Z,1520540639.890 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T20:23:59.890Z,1520540639.890 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T20:24:02.981Z,1520540642.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:02.996Z,1520540642.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:03.100Z,1520540643.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:03.130Z,1520540643.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:03.501Z,1520540643.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:03.534Z,1520540643.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:03.888Z,1520540643.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:03.903Z,1520540643.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:04.288Z,1520540644.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:04.304Z,1520540644.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:04.685Z,1520540644.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:04.709Z,1520540644.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:05.079Z,1520540645.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:05.102Z,1520540645.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:05.474Z,1520540645.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:05.522Z,1520540645.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:05.873Z,1520540645.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:05.903Z,1520540645.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:06.290Z,1520540646.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:06.305Z,1520540646.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:06.693Z,1520540646.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:06.709Z,1520540646.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:07.086Z,1520540647.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:07.127Z,1520540647.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:07.476Z,1520540647.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:07.504Z,1520540647.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:07.873Z,1520540647.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:07.904Z,1520540647.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:08.273Z,1520540648.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:08.313Z,1520540648.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:08.671Z,1520540648.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:08.718Z,1520540648.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:09.089Z,1520540649.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:09.131Z,1520540649.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:09.485Z,1520540649.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:09.513Z,1520540649.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:09.899Z,1520540649.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:09.915Z,1520540649.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:10.276Z,1520540650.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:10.312Z,1520540650.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:10.678Z,1520540650.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:10.713Z,1520540650.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:11.071Z,1520540651.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:11.086Z,1520540651.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:11.478Z,1520540651.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:11.510Z,1520540651.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:11.871Z,1520540651.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:11.909Z,1520540651.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:12.288Z,1520540652.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:12.330Z,1520540652.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:12.699Z,1520540652.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:12.715Z,1520540652.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:13.088Z,1520540653.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:13.111Z,1520540653.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:13.475Z,1520540653.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:13.515Z,1520540653.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:13.880Z,1520540653.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:13.915Z,1520540653.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:14.274Z,1520540654.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:14.289Z,1520540654.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:14.675Z,1520540654.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:14.690Z,1520540654.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:15.092Z,1520540655.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:15.116Z,1520540655.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:15.487Z,1520540655.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:15.521Z,1520540655.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:15.882Z,1520540655.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:15.916Z,1520540655.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:16.283Z,1520540656.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:16.319Z,1520540656.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:16.675Z,1520540656.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:16.695Z,1520540656.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:17.085Z,1520540657.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:17.112Z,1520540657.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:17.493Z,1520540657.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:17.518Z,1520540657.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:17.892Z,1520540657.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:17.926Z,1520540657.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:18.271Z,1520540658.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:18.316Z,1520540658.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:18.678Z,1520540658.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:18.718Z,1520540658.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:19.082Z,1520540659.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:19.097Z,1520540659.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:19.478Z,1520540659.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:19.498Z,1520540659.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:19.882Z,1520540659.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:19.899Z,1520540659.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:20.293Z,1520540660.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:20.324Z,1520540660.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:20.682Z,1520540660.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:20.711Z,1520540660.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:21.085Z,1520540661.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:21.100Z,1520540661.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:21.481Z,1520540661.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:21.499Z,1520540661.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:21.876Z,1520540661.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:21.900Z,1520540661.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:22.280Z,1520540662.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:22.307Z,1520540662.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:22.692Z,1520540662.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:22.707Z,1520540662.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:23.092Z,1520540663.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:23.107Z,1520540663.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:23.495Z,1520540663.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:23.542Z,1520540663.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:23.894Z,1520540663.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:23.909Z,1520540663.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:24.283Z,1520540664.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:24.299Z,1520540664.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:24.681Z,1520540664.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:24.699Z,1520540664.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:25.078Z,1520540665.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:25.111Z,1520540665.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:25.504Z,1520540665.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:25.519Z,1520540665.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:25.875Z,1520540665.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:25.902Z,1520540665.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:26.292Z,1520540666.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:26.320Z,1520540666.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:26.684Z,1520540666.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:26.712Z,1520540666.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:27.099Z,1520540667.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:27.114Z,1520540667.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:27.479Z,1520540667.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:27.511Z,1520540667.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:27.875Z,1520540667.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:27.919Z,1520540667.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:28.287Z,1520540668.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:28.330Z,1520540668.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:28.676Z,1520540668.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:28.691Z,1520540668.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:29.093Z,1520540669.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:29.123Z,1520540669.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:29.492Z,1520540669.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:29.514Z,1520540669.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:29.893Z,1520540669.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:29.920Z,1520540669.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:30.282Z,1520540670.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:30.313Z,1520540670.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:30.678Z,1520540670.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:30.699Z,1520540670.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:31.076Z,1520540671.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:31.096Z,1520540671.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:31.484Z,1520540671.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:31.499Z,1520540671.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:31.882Z,1520540671.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:31.902Z,1520540671.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:32.293Z,1520540672.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:32.325Z,1520540672.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:32.688Z,1520540672.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:32.703Z,1520540672.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:33.093Z,1520540673.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:33.128Z,1520540673.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:33.480Z,1520540673.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:33.508Z,1520540673.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:33.883Z,1520540673.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:33.902Z,1520540673.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:34.289Z,1520540674.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:34.304Z,1520540674.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:34.688Z,1520540674.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:34.710Z,1520540674.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:35.090Z,1520540675.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:35.107Z,1520540675.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:35.491Z,1520540675.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:35.506Z,1520540675.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:35.892Z,1520540675.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:35.907Z,1520540675.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:36.282Z,1520540676.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:36.301Z,1520540676.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:36.684Z,1520540676.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:36.699Z,1520540676.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:37.077Z,1520540677.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:37.098Z,1520540677.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:37.488Z,1520540677.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:37.504Z,1520540677.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:37.889Z,1520540677.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:37.904Z,1520540677.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:38.293Z,1520540678.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:38.309Z,1520540678.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:38.692Z,1520540678.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:38.708Z,1520540678.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:39.095Z,1520540679.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:39.110Z,1520540679.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:39.488Z,1520540679.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:39.504Z,1520540679.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:39.887Z,1520540679.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:39.903Z,1520540679.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:40.285Z,1520540680.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:40.300Z,1520540680.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:40.687Z,1520540680.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:40.702Z,1520540680.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:41.097Z,1520540681.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:41.113Z,1520540681.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:41.492Z,1520540681.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:41.515Z,1520540681.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:41.893Z,1520540681.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:41.907Z,1520540681.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:42.281Z,1520540682.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:42.300Z,1520540682.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:42.681Z,1520540682.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:42.705Z,1520540682.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:43.088Z,1520540683.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:43.103Z,1520540683.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:43.484Z,1520540683.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:43.499Z,1520540683.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:43.886Z,1520540683.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:43.906Z,1520540683.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:44.292Z,1520540684.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:44.315Z,1520540684.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:44.685Z,1520540684.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:44.736Z,1520540684.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:45.097Z,1520540685.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:45.112Z,1520540685.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:45.467Z,1520540685.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:45.504Z,1520540685.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:45.886Z,1520540685.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:45.901Z,1520540685.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:46.274Z,1520540686.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:46.305Z,1520540686.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:46.675Z,1520540686.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:46.702Z,1520540686.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:47.098Z,1520540687.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:47.113Z,1520540687.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:47.495Z,1520540687.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:47.511Z,1520540687.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:47.898Z,1520540687.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:47.913Z,1520540687.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:48.275Z,1520540688.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:48.302Z,1520540688.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:48.670Z,1520540688.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:48.706Z,1520540688.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:49.078Z,1520540689.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:49.116Z,1520540689.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:49.479Z,1520540689.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:49.505Z,1520540689.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:49.874Z,1520540689.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:49.900Z,1520540689.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:50.293Z,1520540690.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:50.317Z,1520540690.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:50.698Z,1520540690.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:50.719Z,1520540690.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:51.097Z,1520540691.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:51.112Z,1520540691.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:51.470Z,1520540691.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:51.503Z,1520540691.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:51.875Z,1520540691.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:51.907Z,1520540691.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:52.272Z,1520540692.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:52.300Z,1520540692.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:52.673Z,1520540692.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:52.708Z,1520540692.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:53.097Z,1520540693.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:53.113Z,1520540693.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:53.496Z,1520540693.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:53.512Z,1520540693.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:53.892Z,1520540693.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:53.916Z,1520540693.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:54.279Z,1520540694.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:54.305Z,1520540694.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:54.674Z,1520540694.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:54.700Z,1520540694.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:55.093Z,1520540695.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:55.117Z,1520540695.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:55.495Z,1520540695.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:55.510Z,1520540695.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:55.893Z,1520540695.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:55.909Z,1520540695.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:56.273Z,1520540696.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:56.301Z,1520540696.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:56.675Z,1520540696.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:56.707Z,1520540696.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:57.077Z,1520540697.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:57.103Z,1520540697.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:57.479Z,1520540697.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:57.508Z,1520540697.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:57.875Z,1520540697.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:57.902Z,1520540697.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:58.293Z,1520540698.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:58.308Z,1520540698.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:58.696Z,1520540698.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:58.712Z,1520540698.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:59.097Z,1520540699.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:59.112Z,1520540699.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:59.474Z,1520540699.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:59.506Z,1520540699.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:24:59.875Z,1520540699.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:24:59.907Z,1520540699.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:02.975Z,1520540702.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:03.005Z,1520540703.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:03.105Z,1520540703.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:03.121Z,1520540703.121 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:03.121Z,1520540703.121 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 253
2018-03-08T20:25:03.121Z,1520540703.121 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T20:25:03.123Z,1520540703.123 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:03.123Z,1520540703.123 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 253
2018-03-08T20:25:03.123Z,1520540703.123 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T20:25:03.125Z,1520540703.125 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:03.125Z,1520540703.125 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 253
2018-03-08T20:25:03.125Z,1520540703.125 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T20:25:03.157Z,1520540703.157 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T20:25:03.157Z,1520540703.157 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T20:25:03.157Z,1520540703.157 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T20:25:03.481Z,1520540703.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:03.533Z,1520540703.533 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T20:25:03.533Z,1520540703.533 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 253
2018-03-08T20:25:03.534Z,1520540703.534 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T20:25:03.534Z,1520540703.534 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 253
2018-03-08T20:25:03.534Z,1520540703.534 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T20:25:03.534Z,1520540703.534 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 253
2018-03-08T20:25:03.868Z,1520540703.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:03.892Z,1520540703.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T20:25:03.892Z,1520540703.892 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:25:03.893Z,1520540703.893 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:25:03.893Z,1520540703.893 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T20:25:03.893Z,1520540703.893 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:25:03.894Z,1520540703.894 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:25:03.894Z,1520540703.894 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T20:25:03.895Z,1520540703.895 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:25:03.895Z,1520540703.895 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:25:04.276Z,1520540704.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:04.291Z,1520540704.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T20:25:04.292Z,1520540704.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:04.656Z,1520540704.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:04.692Z,1520540704.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T20:25:04.693Z,1520540704.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:05.059Z,1520540705.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:05.095Z,1520540705.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T20:25:05.096Z,1520540705.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:05.457Z,1520540705.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:05.488Z,1520540705.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T20:25:05.493Z,1520540705.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:05.858Z,1520540705.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:05.872Z,1520540705.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T20:25:05.873Z,1520540705.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:06.274Z,1520540706.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:06.304Z,1520540706.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T20:25:06.305Z,1520540706.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:06.670Z,1520540706.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:06.695Z,1520540706.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T20:25:06.696Z,1520540706.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:07.071Z,1520540707.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:07.096Z,1520540707.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T20:25:07.097Z,1520540707.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:07.462Z,1520540707.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:07.476Z,1520540707.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T20:25:07.493Z,1520540707.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:07.855Z,1520540707.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:07.903Z,1520540707.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T20:25:07.904Z,1520540707.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:08.262Z,1520540708.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:08.303Z,1520540708.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T20:25:08.303Z,1520540708.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:08.656Z,1520540708.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:08.676Z,1520540708.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T20:25:08.677Z,1520540708.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:09.074Z,1520540709.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:09.104Z,1520540709.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T20:25:09.105Z,1520540709.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:09.473Z,1520540709.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:09.503Z,1520540709.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T20:25:09.504Z,1520540709.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:09.876Z,1520540709.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:09.910Z,1520540709.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T20:25:09.911Z,1520540709.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:10.258Z,1520540710.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:10.276Z,1520540710.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T20:25:10.277Z,1520540710.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:10.664Z,1520540710.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:10.678Z,1520540710.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T20:25:10.679Z,1520540710.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:11.062Z,1520540711.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:11.105Z,1520540711.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T20:25:11.106Z,1520540711.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:11.475Z,1520540711.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:11.502Z,1520540711.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T20:25:11.503Z,1520540711.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:11.868Z,1520540711.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:11.883Z,1520540711.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T20:25:11.884Z,1520540711.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:12.265Z,1520540712.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:12.280Z,1520540712.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T20:25:12.281Z,1520540712.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:12.660Z,1520540712.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:12.699Z,1520540712.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T20:25:12.700Z,1520540712.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:13.066Z,1520540713.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:13.086Z,1520540713.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T20:25:13.087Z,1520540713.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:13.472Z,1520540713.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:13.487Z,1520540713.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T20:25:13.488Z,1520540713.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:13.873Z,1520540713.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:13.901Z,1520540713.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T20:25:13.901Z,1520540713.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:14.284Z,1520540714.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:14.325Z,1520540714.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T20:25:14.326Z,1520540714.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:14.648Z,1520540714.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:14.690Z,1520540714.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T20:25:14.691Z,1520540714.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:15.076Z,1520540715.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:15.090Z,1520540715.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T20:25:15.091Z,1520540715.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:15.477Z,1520540715.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:15.498Z,1520540715.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T20:25:15.499Z,1520540715.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:15.866Z,1520540715.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:15.914Z,1520540715.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T20:25:15.915Z,1520540715.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:16.255Z,1520540716.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:16.283Z,1520540716.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T20:25:16.284Z,1520540716.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:16.669Z,1520540716.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:16.685Z,1520540716.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T20:25:16.685Z,1520540716.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:17.072Z,1520540717.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:17.092Z,1520540717.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T20:25:17.097Z,1520540717.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:17.473Z,1520540717.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:17.519Z,1520540717.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T20:25:17.520Z,1520540717.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:17.871Z,1520540717.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:17.920Z,1520540717.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T20:25:17.921Z,1520540717.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:18.269Z,1520540718.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:18.284Z,1520540718.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T20:25:18.285Z,1520540718.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:18.661Z,1520540718.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:18.683Z,1520540718.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T20:25:18.684Z,1520540718.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:19.069Z,1520540719.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:19.095Z,1520540719.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T20:25:19.096Z,1520540719.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:19.478Z,1520540719.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:19.493Z,1520540719.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T20:25:19.494Z,1520540719.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:19.880Z,1520540719.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:19.894Z,1520540719.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T20:25:19.895Z,1520540719.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:20.265Z,1520540720.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:20.289Z,1520540720.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T20:25:20.290Z,1520540720.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:20.651Z,1520540720.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:20.688Z,1520540720.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T20:25:20.689Z,1520540720.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:21.075Z,1520540721.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:21.098Z,1520540721.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T20:25:21.099Z,1520540721.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:21.482Z,1520540721.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:21.497Z,1520540721.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T20:25:21.498Z,1520540721.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:21.867Z,1520540721.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:21.882Z,1520540721.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T20:25:21.883Z,1520540721.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:22.251Z,1520540722.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:22.297Z,1520540722.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T20:25:22.298Z,1520540722.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:22.654Z,1520540722.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:22.691Z,1520540722.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T20:25:22.691Z,1520540722.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:23.069Z,1520540723.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:23.094Z,1520540723.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T20:25:23.095Z,1520540723.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:23.479Z,1520540723.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:23.494Z,1520540723.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:23.868Z,1520540723.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:23.895Z,1520540723.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:24.255Z,1520540724.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:24.287Z,1520540724.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:24.651Z,1520540724.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:24.683Z,1520540724.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:25.076Z,1520540725.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:25.098Z,1520540725.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:25.480Z,1520540725.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:25.498Z,1520540725.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:25.878Z,1520540725.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:25.893Z,1520540725.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:26.251Z,1520540726.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:26.286Z,1520540726.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:26.658Z,1520540726.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:26.702Z,1520540726.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:27.073Z,1520540727.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:27.110Z,1520540727.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:27.475Z,1520540727.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:27.510Z,1520540727.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:27.857Z,1520540727.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:27.890Z,1520540727.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:28.258Z,1520540728.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:28.286Z,1520540728.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:28.650Z,1520540728.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:28.692Z,1520540728.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:29.061Z,1520540729.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:29.094Z,1520540729.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:29.480Z,1520540729.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:29.495Z,1520540729.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:29.864Z,1520540729.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:29.898Z,1520540729.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:30.256Z,1520540730.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:30.294Z,1520540730.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:30.654Z,1520540730.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:30.694Z,1520540730.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:31.068Z,1520540731.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:31.094Z,1520540731.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:31.480Z,1520540731.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:31.496Z,1520540731.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:31.865Z,1520540731.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:31.896Z,1520540731.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:32.259Z,1520540732.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:32.298Z,1520540732.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:32.652Z,1520540732.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:32.692Z,1520540732.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:33.070Z,1520540733.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:33.102Z,1520540733.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:33.482Z,1520540733.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:33.500Z,1520540733.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:33.864Z,1520540733.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:33.894Z,1520540733.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:34.261Z,1520540734.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:34.292Z,1520540734.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:34.653Z,1520540734.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:34.670Z,1520540734.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:35.066Z,1520540735.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:35.103Z,1520540735.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:35.475Z,1520540735.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:35.501Z,1520540735.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:35.872Z,1520540735.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:35.901Z,1520540735.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:36.261Z,1520540736.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:36.277Z,1520540736.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:36.659Z,1520540736.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:36.706Z,1520540736.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:37.077Z,1520540737.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:37.100Z,1520540737.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:37.471Z,1520540737.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:37.502Z,1520540737.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:37.867Z,1520540737.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:37.886Z,1520540737.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:38.260Z,1520540738.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:38.305Z,1520540738.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:38.652Z,1520540738.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:38.683Z,1520540738.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:39.072Z,1520540739.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:39.088Z,1520540739.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:39.467Z,1520540739.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:39.482Z,1520540739.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:39.866Z,1520540739.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:39.905Z,1520540739.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:40.258Z,1520540740.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:40.289Z,1520540740.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:40.666Z,1520540740.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:40.682Z,1520540740.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:41.074Z,1520540741.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:41.089Z,1520540741.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:41.468Z,1520540741.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:41.509Z,1520540741.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:41.870Z,1520540741.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:41.888Z,1520540741.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:42.258Z,1520540742.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:42.278Z,1520540742.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:42.686Z,1520540742.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:42.726Z,1520540742.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:43.071Z,1520540743.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:43.135Z,1520540743.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:43.475Z,1520540743.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:43.510Z,1520540743.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:43.871Z,1520540743.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:43.917Z,1520540743.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:44.266Z,1520540744.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:44.287Z,1520540744.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:44.647Z,1520540744.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:44.691Z,1520540744.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:45.077Z,1520540745.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:45.092Z,1520540745.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:45.479Z,1520540745.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:45.498Z,1520540745.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:45.870Z,1520540745.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:45.885Z,1520540745.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:46.271Z,1520540746.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:46.320Z,1520540746.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:46.663Z,1520540746.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:46.698Z,1520540746.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:47.069Z,1520540747.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:47.102Z,1520540747.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:47.480Z,1520540747.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:47.496Z,1520540747.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:47.873Z,1520540747.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:47.903Z,1520540747.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:48.251Z,1520540748.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:48.302Z,1520540748.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:48.669Z,1520540748.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:48.702Z,1520540748.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:49.070Z,1520540749.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:49.092Z,1520540749.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:49.480Z,1520540749.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:49.499Z,1520540749.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:49.877Z,1520540749.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:49.893Z,1520540749.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:50.270Z,1520540750.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:50.286Z,1520540750.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:50.647Z,1520540750.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:50.682Z,1520540750.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:51.074Z,1520540751.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:51.117Z,1520540751.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:51.479Z,1520540751.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:51.519Z,1520540751.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:51.873Z,1520540751.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:51.897Z,1520540751.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:52.268Z,1520540752.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:52.284Z,1520540752.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:52.650Z,1520540752.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:52.691Z,1520540752.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:53.072Z,1520540753.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:53.091Z,1520540753.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:53.477Z,1520540753.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:53.493Z,1520540753.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:53.871Z,1520540753.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:53.898Z,1520540753.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:54.264Z,1520540754.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:54.299Z,1520540754.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:54.663Z,1520540754.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:54.683Z,1520540754.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:55.067Z,1520540755.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:55.089Z,1520540755.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:55.474Z,1520540755.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:55.489Z,1520540755.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:55.873Z,1520540755.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:55.919Z,1520540755.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:56.251Z,1520540756.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:56.291Z,1520540756.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:56.668Z,1520540756.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:56.702Z,1520540756.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:57.077Z,1520540757.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:57.096Z,1520540757.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:57.475Z,1520540757.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:57.519Z,1520540757.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:57.865Z,1520540757.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:57.902Z,1520540757.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:58.252Z,1520540758.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:58.302Z,1520540758.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:58.667Z,1520540758.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:58.682Z,1520540758.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:59.070Z,1520540759.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:59.102Z,1520540759.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:59.484Z,1520540759.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:59.498Z,1520540759.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.396562 seconds old.
2018-03-08T20:25:59.499Z,1520540759.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:59.500Z,1520540759.500 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.396899 seconds old.
2018-03-08T20:25:59.501Z,1520540759.501 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.397479 seconds old.
2018-03-08T20:25:59.866Z,1520540759.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:25:59.897Z,1520540759.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.795115 seconds old.
2018-03-08T20:25:59.898Z,1520540759.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:25:59.899Z,1520540759.899 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.795439 seconds old.
2018-03-08T20:25:59.900Z,1520540759.900 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.795777 seconds old.
2018-03-08T20:26:00.248Z,1520540760.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:00.286Z,1520540760.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.184218 seconds old.
2018-03-08T20:26:00.287Z,1520540760.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:00.288Z,1520540760.288 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.184561 seconds old.
2018-03-08T20:26:00.289Z,1520540760.289 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.185108 seconds old.
2018-03-08T20:26:03.360Z,1520540763.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:03.383Z,1520540763.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.280980 seconds old.
2018-03-08T20:26:03.384Z,1520540763.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:03.385Z,1520540763.385 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.281513 seconds old.
2018-03-08T20:26:03.386Z,1520540763.386 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.281942 seconds old.
2018-03-08T20:26:03.493Z,1520540763.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:03.507Z,1520540763.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.405391 seconds old.
2018-03-08T20:26:03.508Z,1520540763.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:03.525Z,1520540763.525 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.421940 seconds old.
2018-03-08T20:26:03.526Z,1520540763.526 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.422366 seconds old.
2018-03-08T20:26:03.857Z,1520540763.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:03.897Z,1520540763.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.795418 seconds old.
2018-03-08T20:26:03.898Z,1520540763.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:03.899Z,1520540763.899 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.795780 seconds old.
2018-03-08T20:26:03.900Z,1520540763.900 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.796129 seconds old.
2018-03-08T20:26:04.249Z,1520540764.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:04.288Z,1520540764.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:04.645Z,1520540764.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:04.663Z,1520540764.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:05.040Z,1520540765.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:05.060Z,1520540765.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:05.436Z,1520540765.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:05.451Z,1520540765.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:05.839Z,1520540765.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:05.859Z,1520540765.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:06.245Z,1520540766.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:06.265Z,1520540766.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:06.645Z,1520540766.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:06.665Z,1520540766.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:07.045Z,1520540767.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:07.061Z,1520540767.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:07.443Z,1520540767.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:07.458Z,1520540767.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:07.842Z,1520540767.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:07.858Z,1520540767.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:08.243Z,1520540768.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:08.263Z,1520540768.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:08.639Z,1520540768.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:08.654Z,1520540768.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:09.045Z,1520540769.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:09.061Z,1520540769.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:09.449Z,1520540769.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:09.470Z,1520540769.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:09.849Z,1520540769.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:09.868Z,1520540769.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:10.241Z,1520540770.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:10.267Z,1520540770.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:10.643Z,1520540770.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:10.658Z,1520540770.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:11.048Z,1520540771.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:11.072Z,1520540771.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:11.451Z,1520540771.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:11.469Z,1520540771.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:11.848Z,1520540771.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:11.893Z,1520540771.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:12.244Z,1520540772.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:12.259Z,1520540772.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:12.643Z,1520540772.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:12.660Z,1520540772.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:13.049Z,1520540773.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:13.068Z,1520540773.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:13.449Z,1520540773.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:13.490Z,1520540773.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:13.848Z,1520540773.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:13.863Z,1520540773.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:14.245Z,1520540774.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:14.263Z,1520540774.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:14.643Z,1520540774.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:14.663Z,1520540774.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:15.048Z,1520540775.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:15.064Z,1520540775.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:15.448Z,1520540775.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:15.463Z,1520540775.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:15.850Z,1520540775.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:15.890Z,1520540775.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:16.245Z,1520540776.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:16.265Z,1520540776.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:16.643Z,1520540776.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:16.728Z,1520540776.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:17.049Z,1520540777.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:17.074Z,1520540777.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:17.453Z,1520540777.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:17.473Z,1520540777.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:17.854Z,1520540777.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:17.871Z,1520540777.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:18.244Z,1520540778.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:18.280Z,1520540778.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:18.643Z,1520540778.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:18.745Z,1520540778.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:19.050Z,1520540779.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:19.094Z,1520540779.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:19.456Z,1520540779.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:19.498Z,1520540779.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:19.853Z,1520540779.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:19.895Z,1520540779.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:20.244Z,1520540780.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:20.266Z,1520540780.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:20.651Z,1520540780.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:20.671Z,1520540780.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:21.057Z,1520540781.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:21.073Z,1520540781.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:21.503Z,1520540781.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:21.549Z,1520540781.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:21.850Z,1520540781.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:21.891Z,1520540781.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:22.246Z,1520540782.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:22.266Z,1520540782.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:22.644Z,1520540782.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:22.664Z,1520540782.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:23.055Z,1520540783.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:23.070Z,1520540783.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:23.459Z,1520540783.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:23.479Z,1520540783.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:23.841Z,1520540783.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:23.870Z,1520540783.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:24.249Z,1520540784.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:24.269Z,1520540784.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:24.631Z,1520540784.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:24.671Z,1520540784.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:25.046Z,1520540785.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:25.072Z,1520540785.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:25.457Z,1520540785.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:25.477Z,1520540785.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:25.859Z,1520540785.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:25.875Z,1520540785.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:26.230Z,1520540786.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:26.275Z,1520540786.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:26.643Z,1520540786.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:26.659Z,1520540786.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:27.052Z,1520540787.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:27.072Z,1520540787.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:27.459Z,1520540787.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:27.478Z,1520540787.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:27.854Z,1520540787.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:27.896Z,1520540787.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:28.231Z,1520540788.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:28.282Z,1520540788.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:28.636Z,1520540788.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:28.667Z,1520540788.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:29.045Z,1520540789.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:29.078Z,1520540789.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:29.445Z,1520540789.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:29.479Z,1520540789.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:29.837Z,1520540789.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:29.874Z,1520540789.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:30.239Z,1520540790.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:30.255Z,1520540790.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:30.638Z,1520540790.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:30.659Z,1520540790.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:31.037Z,1520540791.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:31.053Z,1520540791.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:31.449Z,1520540791.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:31.484Z,1520540791.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:31.841Z,1520540791.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:31.860Z,1520540791.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:32.236Z,1520540792.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:32.256Z,1520540792.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:32.638Z,1520540792.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:32.653Z,1520540792.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:33.049Z,1520540793.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:33.064Z,1520540793.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:33.441Z,1520540793.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:33.457Z,1520540793.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:33.841Z,1520540793.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:33.862Z,1520540793.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:34.243Z,1520540794.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:34.258Z,1520540794.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:34.631Z,1520540794.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:34.655Z,1520540794.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:35.048Z,1520540795.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:35.072Z,1520540795.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:35.448Z,1520540795.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:35.468Z,1520540795.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:35.844Z,1520540795.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:35.894Z,1520540795.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:36.235Z,1520540796.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:36.257Z,1520540796.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:36.643Z,1520540796.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:36.662Z,1520540796.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:37.044Z,1520540797.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:37.065Z,1520540797.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:37.449Z,1520540797.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:37.470Z,1520540797.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:37.853Z,1520540797.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:37.879Z,1520540797.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:38.238Z,1520540798.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:38.260Z,1520540798.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:38.638Z,1520540798.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:38.661Z,1520540798.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:39.053Z,1520540799.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:39.068Z,1520540799.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:39.450Z,1520540799.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:39.474Z,1520540799.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:39.852Z,1520540799.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:39.873Z,1520540799.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:40.245Z,1520540800.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:40.265Z,1520540800.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:40.642Z,1520540800.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:40.659Z,1520540800.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:41.049Z,1520540801.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:41.074Z,1520540801.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:41.453Z,1520540801.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:41.473Z,1520540801.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:41.842Z,1520540801.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:41.867Z,1520540801.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:42.244Z,1520540802.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:42.259Z,1520540802.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:42.631Z,1520540802.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:42.666Z,1520540802.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:43.046Z,1520540803.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:43.072Z,1520540803.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:43.458Z,1520540803.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:43.475Z,1520540803.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:43.854Z,1520540803.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:43.898Z,1520540803.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:44.230Z,1520540804.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:44.257Z,1520540804.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:44.630Z,1520540804.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:44.670Z,1520540804.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:45.057Z,1520540805.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:45.072Z,1520540805.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:45.457Z,1520540805.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:45.501Z,1520540805.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:45.854Z,1520540805.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:45.870Z,1520540805.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:46.235Z,1520540806.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:46.270Z,1520540806.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:46.635Z,1520540806.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:46.666Z,1520540806.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:47.050Z,1520540807.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:47.070Z,1520540807.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:47.458Z,1520540807.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:47.478Z,1520540807.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:47.841Z,1520540807.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:47.869Z,1520540807.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:48.231Z,1520540808.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:48.263Z,1520540808.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:48.627Z,1520540808.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:48.667Z,1520540808.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:49.041Z,1520540809.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:49.064Z,1520540809.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:49.453Z,1520540809.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:49.473Z,1520540809.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:49.851Z,1520540809.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:49.870Z,1520540809.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:50.235Z,1520540810.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:50.281Z,1520540810.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:50.630Z,1520540810.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:50.657Z,1520540810.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:51.055Z,1520540811.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:51.075Z,1520540811.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:51.450Z,1520540811.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:51.478Z,1520540811.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:51.853Z,1520540811.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:51.890Z,1520540811.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:52.235Z,1520540812.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:52.267Z,1520540812.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:52.635Z,1520540812.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:52.671Z,1520540812.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:53.041Z,1520540813.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:53.079Z,1520540813.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:53.449Z,1520540813.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:53.489Z,1520540813.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:53.837Z,1520540813.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:53.861Z,1520540813.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:54.236Z,1520540814.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:54.251Z,1520540814.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:54.635Z,1520540814.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:54.654Z,1520540814.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:55.045Z,1520540815.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:55.077Z,1520540815.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:55.449Z,1520540815.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:55.464Z,1520540815.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:55.854Z,1520540815.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:55.888Z,1520540815.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:56.241Z,1520540816.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:56.261Z,1520540816.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:56.638Z,1520540816.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:56.663Z,1520540816.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:57.049Z,1520540817.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:57.064Z,1520540817.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:57.449Z,1520540817.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:57.470Z,1520540817.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:57.850Z,1520540817.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:57.869Z,1520540817.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:58.244Z,1520540818.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:58.271Z,1520540818.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:58.641Z,1520540818.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:58.656Z,1520540818.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:59.048Z,1520540819.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:59.069Z,1520540819.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:59.450Z,1520540819.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:59.469Z,1520540819.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:26:59.844Z,1520540819.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:26:59.893Z,1520540819.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:00.240Z,1520540820.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:00.255Z,1520540820.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:00.644Z,1520540820.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:00.670Z,1520540820.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:04.869Z,1520540824.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:04.893Z,1520540824.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:05.009Z,1520540825.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:05.046Z,1520540825.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:05.357Z,1520540825.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:05.373Z,1520540825.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:05.748Z,1520540825.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:05.763Z,1520540825.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:06.147Z,1520540826.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:06.162Z,1520540826.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:06.549Z,1520540826.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:06.564Z,1520540826.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:06.948Z,1520540826.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:06.964Z,1520540826.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:07.350Z,1520540827.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:07.371Z,1520540827.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:07.761Z,1520540827.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:07.776Z,1520540827.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:08.154Z,1520540828.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:08.169Z,1520540828.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:08.526Z,1520540828.526 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-03-08T20:27:08.526Z,1520540828.526 [DropWeight] Hardware Fault, FailCount= 1
2018-03-08T20:27:08.526Z,1520540828.526 [DropWeight](ERROR): Hardware Fault
2018-03-08T20:27:08.563Z,1520540828.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:08.578Z,1520540828.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:08.602Z,1520540828.602 [CBIT](INFO): Critical error at 20180308T202708
2018-03-08T20:27:08.604Z,1520540828.604 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-03-08T20:27:08.609Z,1520540828.609 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-03-08T20:27:08.947Z,1520540828.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:08.966Z,1520540828.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:08.978Z,1520540828.978 [CBIT](INFO): Critical error at 20180308T202708
2018-03-08T20:27:09.353Z,1520540829.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:09.367Z,1520540829.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:09.740Z,1520540829.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:09.763Z,1520540829.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:10.156Z,1520540830.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:10.179Z,1520540830.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:10.564Z,1520540830.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:10.579Z,1520540830.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:10.956Z,1520540830.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:10.978Z,1520540830.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:11.351Z,1520540831.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:11.366Z,1520540831.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:11.739Z,1520540831.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:11.775Z,1520540831.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:12.137Z,1520540832.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:12.164Z,1520540832.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:12.543Z,1520540832.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:12.570Z,1520540832.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:12.938Z,1520540832.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:12.966Z,1520540832.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:13.356Z,1520540833.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:13.378Z,1520540833.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:13.766Z,1520540833.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:13.781Z,1520540833.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:14.162Z,1520540834.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:14.177Z,1520540834.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:14.536Z,1520540834.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:14.563Z,1520540834.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:14.943Z,1520540834.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:14.969Z,1520540834.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:15.335Z,1520540835.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:15.372Z,1520540835.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:15.732Z,1520540835.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:15.748Z,1520540835.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:16.161Z,1520540836.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:16.177Z,1520540836.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:16.563Z,1520540836.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:16.578Z,1520540836.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:16.950Z,1520540836.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:16.982Z,1520540836.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:17.343Z,1520540837.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:17.374Z,1520540837.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:17.743Z,1520540837.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:17.775Z,1520540837.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:18.137Z,1520540838.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:18.152Z,1520540838.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:18.543Z,1520540838.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:18.605Z,1520540838.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:18.939Z,1520540838.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:18.954Z,1520540838.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:19.347Z,1520540839.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:19.362Z,1520540839.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:19.761Z,1520540839.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:19.791Z,1520540839.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:20.149Z,1520540840.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:20.188Z,1520540840.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:20.540Z,1520540840.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:20.555Z,1520540840.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:20.944Z,1520540840.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:20.959Z,1520540840.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:21.344Z,1520540841.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:21.360Z,1520540841.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:21.740Z,1520540841.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:21.755Z,1520540841.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:22.157Z,1520540842.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:22.193Z,1520540842.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:22.561Z,1520540842.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:22.593Z,1520540842.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:22.946Z,1520540842.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:22.961Z,1520540842.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:23.348Z,1520540843.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:23.363Z,1520540843.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:23.748Z,1520540843.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:23.762Z,1520540843.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:24.142Z,1520540844.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:24.158Z,1520540844.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:24.549Z,1520540844.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:24.564Z,1520540844.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:24.948Z,1520540844.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:24.963Z,1520540844.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:25.350Z,1520540845.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:25.371Z,1520540845.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:25.753Z,1520540845.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:25.769Z,1520540845.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:26.161Z,1520540846.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:26.176Z,1520540846.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:26.545Z,1520540846.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:26.560Z,1520540846.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:26.946Z,1520540846.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:26.966Z,1520540846.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:27.345Z,1520540847.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:27.360Z,1520540847.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:27.746Z,1520540847.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:27.761Z,1520540847.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:28.153Z,1520540848.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:28.169Z,1520540848.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:28.553Z,1520540848.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:28.569Z,1520540848.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:28.954Z,1520540848.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:28.969Z,1520540848.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:29.351Z,1520540849.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:29.366Z,1520540849.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:29.752Z,1520540849.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:29.767Z,1520540849.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:30.146Z,1520540850.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:30.162Z,1520540850.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:30.542Z,1520540850.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:30.575Z,1520540850.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:30.952Z,1520540850.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:30.968Z,1520540850.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:31.359Z,1520540851.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:31.374Z,1520540851.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:31.758Z,1520540851.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:31.778Z,1520540851.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:32.157Z,1520540852.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:32.172Z,1520540852.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:32.553Z,1520540852.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:32.568Z,1520540852.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:32.951Z,1520540852.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:32.967Z,1520540852.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:33.350Z,1520540853.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:33.365Z,1520540853.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:33.741Z,1520540853.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:33.763Z,1520540853.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:34.157Z,1520540854.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:34.173Z,1520540854.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:34.558Z,1520540854.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:34.573Z,1520540854.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:34.954Z,1520540854.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:34.970Z,1520540854.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:35.346Z,1520540855.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:35.367Z,1520540855.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:35.747Z,1520540855.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:35.763Z,1520540855.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:36.132Z,1520540856.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:36.164Z,1520540856.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:36.540Z,1520540856.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:36.579Z,1520540856.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:36.935Z,1520540856.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:36.963Z,1520540856.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:37.349Z,1520540857.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:37.383Z,1520540857.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:37.764Z,1520540857.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:37.786Z,1520540857.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:38.161Z,1520540858.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:38.177Z,1520540858.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:38.551Z,1520540858.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:38.571Z,1520540858.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:38.939Z,1520540858.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:38.970Z,1520540858.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:39.340Z,1520540859.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:39.375Z,1520540859.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:39.732Z,1520540859.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:39.767Z,1520540859.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:40.158Z,1520540860.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:40.173Z,1520540860.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:40.559Z,1520540860.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:40.580Z,1520540860.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:40.953Z,1520540860.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:40.976Z,1520540860.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:41.338Z,1520540861.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:41.376Z,1520540861.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:41.759Z,1520540861.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:41.795Z,1520540861.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:42.135Z,1520540862.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:42.179Z,1520540862.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:42.542Z,1520540862.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:42.576Z,1520540862.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:42.941Z,1520540862.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:42.998Z,1520540862.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:43.358Z,1520540863.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:43.374Z,1520540863.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:43.759Z,1520540863.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:43.807Z,1520540863.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:44.172Z,1520540864.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:44.201Z,1520540864.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:44.539Z,1520540864.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:44.577Z,1520540864.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:44.940Z,1520540864.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:45.003Z,1520540865.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:45.341Z,1520540865.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:45.385Z,1520540865.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:45.732Z,1520540865.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:45.748Z,1520540865.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:46.169Z,1520540866.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:46.185Z,1520540866.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:46.563Z,1520540866.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:46.577Z,1520540866.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:46.953Z,1520540866.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:46.984Z,1520540866.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:47.347Z,1520540867.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:47.376Z,1520540867.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:47.751Z,1520540867.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:47.776Z,1520540867.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:48.134Z,1520540868.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:48.163Z,1520540868.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:48.549Z,1520540868.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:48.564Z,1520540868.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:48.944Z,1520540868.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:48.959Z,1520540868.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:49.350Z,1520540869.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:49.387Z,1520540869.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:49.761Z,1520540869.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:49.792Z,1520540869.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:50.161Z,1520540870.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:50.195Z,1520540870.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:50.544Z,1520540870.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:50.559Z,1520540870.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:50.945Z,1520540870.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:50.969Z,1520540870.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:51.351Z,1520540871.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:51.366Z,1520540871.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:51.745Z,1520540871.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:51.760Z,1520540871.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:52.153Z,1520540872.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:52.168Z,1520540872.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:52.557Z,1520540872.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:52.572Z,1520540872.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:52.953Z,1520540872.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:52.969Z,1520540872.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:53.351Z,1520540873.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:53.366Z,1520540873.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:53.752Z,1520540873.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:53.767Z,1520540873.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:54.137Z,1520540874.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:54.159Z,1520540874.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:54.545Z,1520540874.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:54.565Z,1520540874.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:54.948Z,1520540874.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:54.970Z,1520540874.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:55.350Z,1520540875.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:55.379Z,1520540875.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:55.758Z,1520540875.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:55.778Z,1520540875.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:56.157Z,1520540876.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:56.179Z,1520540876.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:56.545Z,1520540876.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:56.561Z,1520540876.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:56.945Z,1520540876.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:56.965Z,1520540876.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:57.345Z,1520540877.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:57.369Z,1520540877.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:57.737Z,1520540877.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:57.764Z,1520540877.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:58.161Z,1520540878.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:58.177Z,1520540878.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:58.567Z,1520540878.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:58.583Z,1520540878.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:58.949Z,1520540878.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:58.973Z,1520540878.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:59.338Z,1520540879.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:59.365Z,1520540879.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:27:59.739Z,1520540879.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:27:59.771Z,1520540879.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:00.139Z,1520540880.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:00.165Z,1520540880.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:00.541Z,1520540880.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:00.579Z,1520540880.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:00.943Z,1520540880.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:00.971Z,1520540880.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:04.059Z,1520540884.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:04.075Z,1520540884.075 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:04.075Z,1520540884.075 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 254
2018-03-08T20:28:04.075Z,1520540884.075 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T20:28:04.077Z,1520540884.077 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:04.078Z,1520540884.078 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 254
2018-03-08T20:28:04.078Z,1520540884.078 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T20:28:04.079Z,1520540884.079 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:04.079Z,1520540884.079 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 254
2018-03-08T20:28:04.079Z,1520540884.079 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T20:28:04.091Z,1520540884.091 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T20:28:04.092Z,1520540884.092 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T20:28:04.092Z,1520540884.092 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T20:28:04.211Z,1520540884.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:04.261Z,1520540884.261 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T20:28:04.261Z,1520540884.261 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 254
2018-03-08T20:28:04.261Z,1520540884.261 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T20:28:04.262Z,1520540884.262 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 254
2018-03-08T20:28:04.262Z,1520540884.262 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T20:28:04.262Z,1520540884.262 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 254
2018-03-08T20:28:04.544Z,1520540884.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:04.558Z,1520540884.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T20:28:04.559Z,1520540884.559 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:28:04.559Z,1520540884.559 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:28:04.560Z,1520540884.560 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T20:28:04.560Z,1520540884.560 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:28:04.561Z,1520540884.561 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:28:04.561Z,1520540884.561 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T20:28:04.561Z,1520540884.561 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:28:04.562Z,1520540884.562 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:28:04.947Z,1520540884.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:04.962Z,1520540884.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-03-08T20:28:04.962Z,1520540884.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:05.335Z,1520540885.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:05.362Z,1520540885.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-03-08T20:28:05.363Z,1520540885.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:05.729Z,1520540885.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:05.756Z,1520540885.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-03-08T20:28:05.757Z,1520540885.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:06.144Z,1520540886.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:06.168Z,1520540886.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-03-08T20:28:06.169Z,1520540886.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:06.554Z,1520540886.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:06.569Z,1520540886.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-03-08T20:28:06.570Z,1520540886.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:06.951Z,1520540886.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:06.965Z,1520540886.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-03-08T20:28:06.966Z,1520540886.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:07.326Z,1520540887.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:07.367Z,1520540887.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-03-08T20:28:07.367Z,1520540887.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:07.724Z,1520540887.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:07.751Z,1520540887.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-03-08T20:28:07.757Z,1520540887.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:08.130Z,1520540888.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:08.162Z,1520540888.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-03-08T20:28:08.163Z,1520540888.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:08.524Z,1520540888.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:08.560Z,1520540888.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-03-08T20:28:08.561Z,1520540888.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:08.925Z,1520540888.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:08.961Z,1520540888.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-08T20:28:08.961Z,1520540888.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:09.351Z,1520540889.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:09.366Z,1520540889.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-03-08T20:28:09.367Z,1520540889.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:09.751Z,1520540889.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:09.766Z,1520540889.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-03-08T20:28:09.767Z,1520540889.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:10.139Z,1520540890.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:10.180Z,1520540890.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T20:28:10.181Z,1520540890.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:10.530Z,1520540890.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:10.567Z,1520540890.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-08T20:28:10.567Z,1520540890.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:10.922Z,1520540890.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:10.938Z,1520540890.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-08T20:28:10.939Z,1520540890.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:11.331Z,1520540891.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:11.364Z,1520540891.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-08T20:28:11.369Z,1520540891.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:11.730Z,1520540891.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:11.767Z,1520540891.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-08T20:28:11.768Z,1520540891.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:12.141Z,1520540892.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:12.173Z,1520540892.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-08T20:28:12.174Z,1520540892.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:12.546Z,1520540892.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:12.572Z,1520540892.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-08T20:28:12.573Z,1520540892.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:12.946Z,1520540892.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:12.969Z,1520540892.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-08T20:28:12.970Z,1520540892.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:13.331Z,1520540893.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:13.346Z,1520540893.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-08T20:28:13.347Z,1520540893.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:13.728Z,1520540893.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:13.743Z,1520540893.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-08T20:28:13.744Z,1520540893.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:14.131Z,1520540894.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:14.147Z,1520540894.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T20:28:14.148Z,1520540894.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:14.536Z,1520540894.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:14.551Z,1520540894.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-08T20:28:14.552Z,1520540894.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:14.923Z,1520540894.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:14.955Z,1520540894.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T20:28:14.956Z,1520540894.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:15.350Z,1520540895.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:15.378Z,1520540895.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T20:28:15.379Z,1520540895.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:15.745Z,1520540895.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:15.760Z,1520540895.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T20:28:15.773Z,1520540895.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:16.138Z,1520540896.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:16.153Z,1520540896.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T20:28:16.154Z,1520540896.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:16.536Z,1520540896.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:16.558Z,1520540896.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T20:28:16.559Z,1520540896.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:16.987Z,1520540896.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:17.067Z,1520540897.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2018-03-08T20:28:17.068Z,1520540897.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:17.339Z,1520540897.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:17.353Z,1520540897.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-08T20:28:17.354Z,1520540897.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:17.737Z,1520540897.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:17.752Z,1520540897.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-08T20:28:17.753Z,1520540897.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:18.140Z,1520540898.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:18.162Z,1520540898.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-08T20:28:18.163Z,1520540898.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:18.540Z,1520540898.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:18.555Z,1520540898.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-08T20:28:18.556Z,1520540898.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:18.941Z,1520540898.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:18.955Z,1520540898.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T20:28:18.956Z,1520540898.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:19.335Z,1520540899.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:19.350Z,1520540899.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-08T20:28:19.351Z,1520540899.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:19.730Z,1520540899.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:19.804Z,1520540899.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T20:28:19.853Z,1520540899.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:20.139Z,1520540900.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:20.154Z,1520540900.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T20:28:20.155Z,1520540900.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:20.532Z,1520540900.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:20.547Z,1520540900.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T20:28:20.548Z,1520540900.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:20.925Z,1520540900.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:20.953Z,1520540900.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T20:28:20.954Z,1520540900.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:21.344Z,1520540901.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:21.359Z,1520540901.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-08T20:28:21.360Z,1520540901.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:21.745Z,1520540901.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:21.760Z,1520540901.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T20:28:21.761Z,1520540901.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:22.145Z,1520540902.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:22.159Z,1520540902.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-08T20:28:22.161Z,1520540902.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:22.539Z,1520540902.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:22.554Z,1520540902.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-08T20:28:22.555Z,1520540902.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:22.939Z,1520540902.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:22.954Z,1520540902.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T20:28:22.955Z,1520540902.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:23.340Z,1520540903.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:23.354Z,1520540903.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T20:28:23.355Z,1520540903.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:23.738Z,1520540903.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:23.758Z,1520540903.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T20:28:23.759Z,1520540903.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:24.144Z,1520540904.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:24.182Z,1520540904.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:24.541Z,1520540904.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:24.570Z,1520540904.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:24.948Z,1520540904.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:24.963Z,1520540904.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:25.334Z,1520540905.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:25.362Z,1520540905.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:25.733Z,1520540905.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:25.752Z,1520540905.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:26.131Z,1520540906.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:26.166Z,1520540906.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:26.542Z,1520540906.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:26.557Z,1520540906.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:26.924Z,1520540906.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:26.952Z,1520540906.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:27.345Z,1520540907.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:27.361Z,1520540907.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:27.748Z,1520540907.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:27.763Z,1520540907.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:28.145Z,1520540908.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:28.160Z,1520540908.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:28.534Z,1520540908.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:28.554Z,1520540908.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:28.933Z,1520540908.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:28.959Z,1520540908.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:29.337Z,1520540909.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:29.352Z,1520540909.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:29.733Z,1520540909.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:29.752Z,1520540909.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:30.145Z,1520540910.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:30.160Z,1520540910.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:30.548Z,1520540910.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:30.563Z,1520540910.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:30.961Z,1520540910.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:30.993Z,1520540910.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:31.341Z,1520540911.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:31.362Z,1520540911.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:31.724Z,1520540911.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:31.751Z,1520540911.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:32.126Z,1520540912.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:32.154Z,1520540912.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:32.526Z,1520540912.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:32.555Z,1520540912.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:32.924Z,1520540912.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:32.956Z,1520540912.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:33.351Z,1520540913.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:33.366Z,1520540913.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:33.751Z,1520540913.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:33.766Z,1520540913.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:34.146Z,1520540914.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:34.161Z,1520540914.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:34.542Z,1520540914.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:34.561Z,1520540914.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:34.927Z,1520540914.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:34.963Z,1520540914.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:35.331Z,1520540915.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:35.362Z,1520540915.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:35.726Z,1520540915.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:35.762Z,1520540915.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:36.138Z,1520540916.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:36.175Z,1520540916.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:36.549Z,1520540916.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:36.569Z,1520540916.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:36.955Z,1520540916.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:36.978Z,1520540916.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:37.339Z,1520540917.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:37.365Z,1520540917.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:37.732Z,1520540917.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:37.756Z,1520540917.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:38.130Z,1520540918.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:38.170Z,1520540918.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:38.531Z,1520540918.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:38.548Z,1520540918.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:38.935Z,1520540918.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:38.951Z,1520540918.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:39.346Z,1520540919.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:39.377Z,1520540919.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:39.746Z,1520540919.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:39.781Z,1520540919.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:40.138Z,1520540920.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:40.159Z,1520540920.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:40.537Z,1520540920.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:40.552Z,1520540920.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:40.937Z,1520540920.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:40.952Z,1520540920.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:41.330Z,1520540921.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:41.359Z,1520540921.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:41.739Z,1520540921.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:41.754Z,1520540921.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:42.142Z,1520540922.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:42.158Z,1520540922.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:42.545Z,1520540922.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:42.560Z,1520540922.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:42.945Z,1520540922.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:42.964Z,1520540922.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:43.344Z,1520540923.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:43.359Z,1520540923.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:43.736Z,1520540923.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:43.751Z,1520540923.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:44.136Z,1520540924.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:44.151Z,1520540924.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:44.531Z,1520540924.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:44.563Z,1520540924.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:44.940Z,1520540924.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:44.962Z,1520540924.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:45.351Z,1520540925.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:45.366Z,1520540925.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:45.749Z,1520540925.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:45.765Z,1520540925.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:46.141Z,1520540926.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:46.161Z,1520540926.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:46.529Z,1520540926.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:46.563Z,1520540926.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:46.941Z,1520540926.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:46.962Z,1520540926.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:47.328Z,1520540927.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:47.362Z,1520540927.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:47.743Z,1520540927.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:47.758Z,1520540927.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:48.138Z,1520540928.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:48.166Z,1520540928.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:48.549Z,1520540928.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:48.565Z,1520540928.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:48.948Z,1520540928.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:48.971Z,1520540928.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:49.322Z,1520540929.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:49.351Z,1520540929.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:49.730Z,1520540929.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:49.766Z,1520540929.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:50.126Z,1520540930.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:50.159Z,1520540930.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:50.531Z,1520540930.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:50.564Z,1520540930.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:50.930Z,1520540930.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:50.971Z,1520540930.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:51.342Z,1520540931.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:51.373Z,1520540931.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:51.745Z,1520540931.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:51.774Z,1520540931.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:52.146Z,1520540932.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:52.178Z,1520540932.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:52.536Z,1520540932.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:52.551Z,1520540932.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:52.936Z,1520540932.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:52.951Z,1520540932.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:53.333Z,1520540933.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:53.348Z,1520540933.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:53.736Z,1520540933.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:53.758Z,1520540933.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:54.149Z,1520540934.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:54.191Z,1520540934.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:54.547Z,1520540934.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:54.562Z,1520540934.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:54.945Z,1520540934.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:54.960Z,1520540934.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:55.340Z,1520540935.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:55.355Z,1520540935.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:55.739Z,1520540935.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:55.755Z,1520540935.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:56.138Z,1520540936.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:56.159Z,1520540936.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:56.540Z,1520540936.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:56.555Z,1520540936.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:56.934Z,1520540936.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:56.954Z,1520540936.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:57.345Z,1520540937.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:57.360Z,1520540937.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:57.745Z,1520540937.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:57.759Z,1520540937.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:58.144Z,1520540938.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:58.159Z,1520540938.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:58.559Z,1520540938.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:58.587Z,1520540938.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:58.931Z,1520540938.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:58.946Z,1520540938.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:59.340Z,1520540939.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:59.355Z,1520540939.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:28:59.738Z,1520540939.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:28:59.770Z,1520540939.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:00.145Z,1520540940.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:00.178Z,1520540940.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:00.181Z,1520540940.181 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T20:23:59.9Z
2018-03-08T20:29:00.182Z,1520540940.182 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T20:29:00.182Z,1520540940.182 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T20:29:00.542Z,1520540940.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:00.576Z,1520540940.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:01.041Z,1520540941.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:01.084Z,1520540941.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:01.330Z,1520540941.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:01.346Z,1520540941.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:04.431Z,1520540944.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:04.447Z,1520540944.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:04.551Z,1520540944.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:04.586Z,1520540944.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:04.938Z,1520540944.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:04.953Z,1520540944.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:05.338Z,1520540945.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:05.358Z,1520540945.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:05.737Z,1520540945.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:05.752Z,1520540945.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:06.114Z,1520540946.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:06.141Z,1520540946.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:06.515Z,1520540946.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:06.543Z,1520540946.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:09.636Z,1520540949.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:09.652Z,1520540949.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:09.761Z,1520540949.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:09.795Z,1520540949.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:10.101Z,1520540950.101 [DataOverHttps](INFO): Sending 124 bytes from file Logs/20180308T074127/Courier0296.lzma
2018-03-08T20:29:10.145Z,1520540950.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:10.160Z,1520540950.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:10.541Z,1520540950.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:10.556Z,1520540950.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:10.900Z,1520540950.900 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0296.lzma.bak
2018-03-08T20:29:10.900Z,1520540950.900 [DataOverHttps](INFO): SBD MOMSN=7988873
2018-03-08T20:29:10.937Z,1520540950.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:10.958Z,1520540950.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:11.523Z,1520540951.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:11.539Z,1520540951.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:11.721Z,1520540951.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:11.754Z,1520540951.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:14.838Z,1520540954.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:14.859Z,1520540954.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:14.980Z,1520540954.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:15.014Z,1520540955.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:15.357Z,1520540955.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:15.388Z,1520540955.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:15.745Z,1520540955.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:15.760Z,1520540955.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:16.147Z,1520540956.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:16.163Z,1520540956.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:16.540Z,1520540956.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:16.555Z,1520540956.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:16.926Z,1520540956.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:16.960Z,1520540956.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:20.049Z,1520540960.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:20.066Z,1520540960.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:20.181Z,1520540960.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:20.222Z,1520540960.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:20.514Z,1520540960.514 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0297.lzma
2018-03-08T20:29:20.563Z,1520540960.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:20.603Z,1520540960.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:20.934Z,1520540960.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:20.960Z,1520540960.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:21.311Z,1520540961.311 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0297.lzma.bak
2018-03-08T20:29:21.312Z,1520540961.312 [DataOverHttps](INFO): SBD MOMSN=7988878
2018-03-08T20:29:21.356Z,1520540961.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:21.371Z,1520540961.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:21.928Z,1520540961.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:21.955Z,1520540961.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:21.958Z,1520540961.958 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T20:29:21.958Z,1520540961.958 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T20:29:21.958Z,1520540961.958 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T20:29:22.155Z,1520540962.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:22.198Z,1520540962.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:25.257Z,1520540965.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:25.272Z,1520540965.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:25.377Z,1520540965.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:25.407Z,1520540965.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:25.761Z,1520540965.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:25.776Z,1520540965.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:26.161Z,1520540966.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:26.176Z,1520540966.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:26.564Z,1520540966.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:26.579Z,1520540966.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:26.960Z,1520540966.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:26.975Z,1520540966.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:27.373Z,1520540967.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:27.388Z,1520540967.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:27.761Z,1520540967.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:27.777Z,1520540967.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:28.167Z,1520540968.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:28.182Z,1520540968.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:28.560Z,1520540968.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:28.576Z,1520540968.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:28.949Z,1520540968.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:28.981Z,1520540968.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:29.360Z,1520540969.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:29.377Z,1520540969.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:29.755Z,1520540969.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:29.771Z,1520540969.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:30.164Z,1520540970.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:30.187Z,1520540970.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:30.565Z,1520540970.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:30.581Z,1520540970.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:30.965Z,1520540970.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:30.987Z,1520540970.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:31.348Z,1520540971.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:31.376Z,1520540971.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:31.759Z,1520540971.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:31.774Z,1520540971.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:32.156Z,1520540972.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:32.171Z,1520540972.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:32.559Z,1520540972.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:32.578Z,1520540972.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:32.957Z,1520540972.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:32.977Z,1520540972.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:33.364Z,1520540973.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:33.385Z,1520540973.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:33.767Z,1520540973.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:33.795Z,1520540973.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:34.172Z,1520540974.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:34.187Z,1520540974.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:34.547Z,1520540974.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:34.575Z,1520540974.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:34.949Z,1520540974.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:34.979Z,1520540974.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:35.352Z,1520540975.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:35.378Z,1520540975.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:35.747Z,1520540975.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:35.784Z,1520540975.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:36.161Z,1520540976.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:36.185Z,1520540976.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:36.573Z,1520540976.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:36.588Z,1520540976.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:36.974Z,1520540976.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:36.989Z,1520540976.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:37.349Z,1520540977.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:37.383Z,1520540977.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:37.751Z,1520540977.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:37.777Z,1520540977.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:38.151Z,1520540978.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:38.190Z,1520540978.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:38.548Z,1520540978.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:38.575Z,1520540978.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:38.951Z,1520540978.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:38.978Z,1520540978.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:39.366Z,1520540979.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:39.406Z,1520540979.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:39.765Z,1520540979.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:39.790Z,1520540979.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:40.193Z,1520540980.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:40.208Z,1520540980.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:40.557Z,1520540980.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:40.612Z,1520540980.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:40.954Z,1520540980.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:41.002Z,1520540981.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:41.357Z,1520540981.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:41.381Z,1520540981.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:41.754Z,1520540981.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:41.769Z,1520540981.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:42.165Z,1520540982.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:42.181Z,1520540982.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:42.573Z,1520540982.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:42.601Z,1520540982.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:42.968Z,1520540982.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:42.983Z,1520540982.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:43.353Z,1520540983.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:43.381Z,1520540983.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:43.759Z,1520540983.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:43.790Z,1520540983.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:44.154Z,1520540984.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:44.169Z,1520540984.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:44.555Z,1520540984.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:44.571Z,1520540984.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:44.958Z,1520540984.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:44.981Z,1520540984.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:45.364Z,1520540985.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:45.394Z,1520540985.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:45.767Z,1520540985.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:45.810Z,1520540985.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:46.173Z,1520540986.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:46.203Z,1520540986.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:46.590Z,1520540986.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:46.605Z,1520540986.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:46.952Z,1520540986.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:46.967Z,1520540986.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:47.357Z,1520540987.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:47.372Z,1520540987.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:47.758Z,1520540987.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:47.801Z,1520540987.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:48.157Z,1520540988.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:48.173Z,1520540988.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:48.569Z,1520540988.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:48.593Z,1520540988.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:48.969Z,1520540988.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:48.994Z,1520540988.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:49.352Z,1520540989.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:49.367Z,1520540989.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:49.758Z,1520540989.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:49.779Z,1520540989.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:50.156Z,1520540990.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:50.172Z,1520540990.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:50.558Z,1520540990.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:50.578Z,1520540990.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:50.956Z,1520540990.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:50.971Z,1520540990.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:51.377Z,1520540991.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:51.413Z,1520540991.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:51.760Z,1520540991.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:51.775Z,1520540991.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:52.165Z,1520540992.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:52.181Z,1520540992.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:52.561Z,1520540992.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:52.576Z,1520540992.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:52.955Z,1520540992.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:52.974Z,1520540992.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:53.358Z,1520540993.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:53.385Z,1520540993.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:53.760Z,1520540993.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:53.776Z,1520540993.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:54.164Z,1520540994.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:54.187Z,1520540994.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:54.565Z,1520540994.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:54.581Z,1520540994.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:54.968Z,1520540994.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:54.986Z,1520540994.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:55.386Z,1520540995.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:55.406Z,1520540995.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:55.759Z,1520540995.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:55.809Z,1520540995.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:56.156Z,1520540996.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:56.207Z,1520540996.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:56.553Z,1520540996.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:56.588Z,1520540996.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:56.956Z,1520540996.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:56.987Z,1520540996.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:57.391Z,1520540997.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:57.419Z,1520540997.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:57.766Z,1520540997.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:57.790Z,1520540997.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:58.165Z,1520540998.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:58.186Z,1520540998.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:58.555Z,1520540998.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:58.583Z,1520540998.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:58.958Z,1520540998.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:58.978Z,1520540998.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:59.359Z,1520540999.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:59.382Z,1520540999.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:29:59.759Z,1520540999.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:29:59.775Z,1520540999.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:00.165Z,1520541000.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:00.181Z,1520541000.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:00.565Z,1520541000.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:00.580Z,1520541000.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:00.966Z,1520541000.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:00.981Z,1520541000.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:01.359Z,1520541001.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:01.375Z,1520541001.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:01.762Z,1520541001.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:01.777Z,1520541001.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:02.158Z,1520541002.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:02.197Z,1520541002.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:02.557Z,1520541002.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:02.578Z,1520541002.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:02.959Z,1520541002.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:02.979Z,1520541002.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:03.374Z,1520541003.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:03.389Z,1520541003.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:03.772Z,1520541003.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:03.791Z,1520541003.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:04.171Z,1520541004.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:04.198Z,1520541004.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:04.552Z,1520541004.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:04.580Z,1520541004.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:04.948Z,1520541004.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:04.975Z,1520541004.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:05.361Z,1520541005.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:05.384Z,1520541005.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:05.751Z,1520541005.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:05.788Z,1520541005.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:06.176Z,1520541006.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:06.192Z,1520541006.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:06.576Z,1520541006.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:06.591Z,1520541006.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:06.976Z,1520541006.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:06.992Z,1520541006.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:07.347Z,1520541007.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:07.374Z,1520541007.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:07.751Z,1520541007.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:07.775Z,1520541007.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:08.151Z,1520541008.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:08.166Z,1520541008.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:08.558Z,1520541008.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:08.590Z,1520541008.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:08.959Z,1520541008.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:08.996Z,1520541008.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:09.369Z,1520541009.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:09.396Z,1520541009.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:09.773Z,1520541009.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:09.799Z,1520541009.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:10.173Z,1520541010.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:10.204Z,1520541010.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:10.562Z,1520541010.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:10.602Z,1520541010.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:10.956Z,1520541010.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:10.972Z,1520541010.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:11.363Z,1520541011.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:11.378Z,1520541011.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:11.757Z,1520541011.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:11.772Z,1520541011.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:12.158Z,1520541012.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:12.173Z,1520541012.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:12.569Z,1520541012.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:12.584Z,1520541012.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:12.965Z,1520541012.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:12.986Z,1520541012.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:13.359Z,1520541013.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:13.374Z,1520541013.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:13.758Z,1520541013.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:13.774Z,1520541013.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:14.155Z,1520541014.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:14.170Z,1520541014.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:14.559Z,1520541014.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:14.574Z,1520541014.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:14.958Z,1520541014.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:14.973Z,1520541014.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:15.365Z,1520541015.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:15.380Z,1520541015.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:15.765Z,1520541015.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:15.781Z,1520541015.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:16.177Z,1520541016.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:16.208Z,1520541016.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:16.560Z,1520541016.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:16.575Z,1520541016.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:16.958Z,1520541016.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:16.978Z,1520541016.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:17.360Z,1520541017.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:17.375Z,1520541017.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:17.787Z,1520541017.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:17.923Z,1520541017.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:18.161Z,1520541018.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:18.177Z,1520541018.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:18.566Z,1520541018.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:18.587Z,1520541018.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:18.965Z,1520541018.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:18.986Z,1520541018.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:19.357Z,1520541019.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:19.372Z,1520541019.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:19.795Z,1520541019.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:19.812Z,1520541019.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:20.155Z,1520541020.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:20.170Z,1520541020.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:20.559Z,1520541020.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:20.575Z,1520541020.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:20.959Z,1520541020.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:20.974Z,1520541020.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:21.365Z,1520541021.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:21.380Z,1520541021.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:21.765Z,1520541021.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:21.780Z,1520541021.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:22.165Z,1520541022.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:22.181Z,1520541022.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:22.560Z,1520541022.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:22.575Z,1520541022.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:25.657Z,1520541025.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:25.673Z,1520541025.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:25.764Z,1520541025.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:25.808Z,1520541025.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:26.153Z,1520541026.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:26.176Z,1520541026.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:26.534Z,1520541026.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:26.549Z,1520541026.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:26.932Z,1520541026.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:26.948Z,1520541026.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:27.330Z,1520541027.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:27.346Z,1520541027.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:27.727Z,1520541027.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:27.743Z,1520541027.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:28.123Z,1520541028.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:28.140Z,1520541028.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:28.530Z,1520541028.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:28.546Z,1520541028.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:28.931Z,1520541028.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:28.947Z,1520541028.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:29.331Z,1520541029.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:29.347Z,1520541029.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:29.741Z,1520541029.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:29.756Z,1520541029.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:30.134Z,1520541030.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:30.149Z,1520541030.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:30.518Z,1520541030.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:30.539Z,1520541030.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:30.927Z,1520541030.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:30.943Z,1520541030.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:31.327Z,1520541031.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:31.343Z,1520541031.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:31.723Z,1520541031.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:31.739Z,1520541031.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:32.137Z,1520541032.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:32.169Z,1520541032.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:32.537Z,1520541032.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:32.571Z,1520541032.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:32.943Z,1520541032.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:32.967Z,1520541032.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:33.323Z,1520541033.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:33.339Z,1520541033.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:33.726Z,1520541033.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:33.746Z,1520541033.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:34.127Z,1520541034.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:34.143Z,1520541034.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:34.528Z,1520541034.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:34.550Z,1520541034.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:34.926Z,1520541034.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:34.946Z,1520541034.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:35.329Z,1520541035.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:35.345Z,1520541035.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:35.734Z,1520541035.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:35.754Z,1520541035.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:36.134Z,1520541036.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:36.149Z,1520541036.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:36.526Z,1520541036.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:36.547Z,1520541036.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:36.927Z,1520541036.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:36.943Z,1520541036.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:37.332Z,1520541037.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:37.349Z,1520541037.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:37.731Z,1520541037.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:37.747Z,1520541037.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:38.134Z,1520541038.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:38.149Z,1520541038.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:38.546Z,1520541038.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:38.577Z,1520541038.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:38.932Z,1520541038.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:38.948Z,1520541038.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:39.332Z,1520541039.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:39.348Z,1520541039.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:39.725Z,1520541039.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:39.748Z,1520541039.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:40.125Z,1520541040.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:40.146Z,1520541040.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:40.535Z,1520541040.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:40.554Z,1520541040.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:40.927Z,1520541040.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:40.943Z,1520541040.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:41.333Z,1520541041.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:41.349Z,1520541041.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:41.735Z,1520541041.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:41.750Z,1520541041.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:42.135Z,1520541042.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:42.154Z,1520541042.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:42.530Z,1520541042.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:42.554Z,1520541042.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:42.930Z,1520541042.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:42.954Z,1520541042.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:43.332Z,1520541043.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:43.348Z,1520541043.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:43.730Z,1520541043.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:43.747Z,1520541043.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:44.134Z,1520541044.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:44.151Z,1520541044.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:44.537Z,1520541044.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:44.554Z,1520541044.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:44.934Z,1520541044.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:44.950Z,1520541044.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:45.331Z,1520541045.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:45.347Z,1520541045.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:45.726Z,1520541045.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:45.742Z,1520541045.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:46.127Z,1520541046.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:46.142Z,1520541046.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:46.523Z,1520541046.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:46.551Z,1520541046.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:46.926Z,1520541046.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:46.942Z,1520541046.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:47.337Z,1520541047.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:47.352Z,1520541047.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:47.738Z,1520541047.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:47.753Z,1520541047.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:48.137Z,1520541048.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:48.152Z,1520541048.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:48.530Z,1520541048.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:48.550Z,1520541048.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:48.930Z,1520541048.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:48.950Z,1520541048.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:49.327Z,1520541049.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:49.343Z,1520541049.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:49.730Z,1520541049.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:49.750Z,1520541049.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:50.137Z,1520541050.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:50.158Z,1520541050.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:50.537Z,1520541050.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:50.551Z,1520541050.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:50.937Z,1520541050.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:50.952Z,1520541050.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:51.330Z,1520541051.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:51.351Z,1520541051.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:51.726Z,1520541051.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:51.742Z,1520541051.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:52.130Z,1520541052.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:52.154Z,1520541052.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:52.531Z,1520541052.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:52.547Z,1520541052.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:52.927Z,1520541052.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:52.942Z,1520541052.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:53.335Z,1520541053.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:53.354Z,1520541053.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:53.736Z,1520541053.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:53.752Z,1520541053.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:54.137Z,1520541054.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:54.152Z,1520541054.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:54.530Z,1520541054.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:54.550Z,1520541054.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:54.931Z,1520541054.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:54.954Z,1520541054.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:55.331Z,1520541055.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:55.347Z,1520541055.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:55.730Z,1520541055.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:55.750Z,1520541055.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:56.135Z,1520541056.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:56.154Z,1520541056.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:56.536Z,1520541056.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:56.551Z,1520541056.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:56.937Z,1520541056.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:56.958Z,1520541056.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:57.330Z,1520541057.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:57.350Z,1520541057.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:57.731Z,1520541057.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:57.747Z,1520541057.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:58.130Z,1520541058.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:58.150Z,1520541058.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:58.523Z,1520541058.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:58.546Z,1520541058.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:58.927Z,1520541058.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:58.943Z,1520541058.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:59.340Z,1520541059.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:59.355Z,1520541059.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:30:59.741Z,1520541059.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:30:59.756Z,1520541059.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:00.138Z,1520541060.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:00.153Z,1520541060.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:00.530Z,1520541060.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:00.551Z,1520541060.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:00.930Z,1520541060.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:00.950Z,1520541060.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:01.331Z,1520541061.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:01.347Z,1520541061.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:01.731Z,1520541061.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:01.750Z,1520541061.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:02.137Z,1520541062.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:02.152Z,1520541062.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:02.541Z,1520541062.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:02.556Z,1520541062.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:02.937Z,1520541062.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:02.952Z,1520541062.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:03.330Z,1520541063.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:03.350Z,1520541063.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:03.730Z,1520541063.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:03.747Z,1520541063.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:04.130Z,1520541064.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:04.150Z,1520541064.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:04.528Z,1520541064.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:04.544Z,1520541064.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:04.926Z,1520541064.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:04.942Z,1520541064.942 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:04.942Z,1520541064.942 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 255
2018-03-08T20:31:04.942Z,1520541064.942 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T20:31:04.944Z,1520541064.944 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:04.944Z,1520541064.944 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 255
2018-03-08T20:31:04.944Z,1520541064.944 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T20:31:04.946Z,1520541064.946 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:04.946Z,1520541064.946 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 255
2018-03-08T20:31:04.946Z,1520541064.946 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T20:31:04.957Z,1520541064.957 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T20:31:04.958Z,1520541064.958 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T20:31:04.958Z,1520541064.958 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T20:31:05.337Z,1520541065.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:05.362Z,1520541065.362 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T20:31:05.363Z,1520541065.363 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 255
2018-03-08T20:31:05.363Z,1520541065.363 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T20:31:05.363Z,1520541065.363 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 255
2018-03-08T20:31:05.364Z,1520541065.364 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T20:31:05.364Z,1520541065.364 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 255
2018-03-08T20:31:05.744Z,1520541065.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:05.766Z,1520541065.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T20:31:05.767Z,1520541065.767 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:31:05.767Z,1520541065.767 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:31:05.767Z,1520541065.767 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T20:31:05.768Z,1520541065.768 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:31:05.768Z,1520541065.768 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:31:05.785Z,1520541065.785 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T20:31:05.785Z,1520541065.785 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:31:05.785Z,1520541065.785 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:31:06.124Z,1520541066.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:06.158Z,1520541066.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T20:31:06.159Z,1520541066.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:06.523Z,1520541066.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:06.550Z,1520541066.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T20:31:06.550Z,1520541066.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:06.935Z,1520541066.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:06.954Z,1520541066.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T20:31:06.955Z,1520541066.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:07.315Z,1520541067.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:07.347Z,1520541067.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T20:31:07.348Z,1520541067.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:07.722Z,1520541067.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:07.749Z,1520541067.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T20:31:07.750Z,1520541067.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:08.138Z,1520541068.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:08.152Z,1520541068.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T20:31:08.153Z,1520541068.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:08.539Z,1520541068.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:08.553Z,1520541068.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T20:31:08.554Z,1520541068.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:08.942Z,1520541068.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:08.956Z,1520541068.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T20:31:08.957Z,1520541068.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:09.319Z,1520541069.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:09.351Z,1520541069.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T20:31:09.352Z,1520541069.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:09.722Z,1520541069.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:09.750Z,1520541069.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T20:31:09.751Z,1520541069.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:10.122Z,1520541070.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:10.149Z,1520541070.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T20:31:10.150Z,1520541070.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:10.526Z,1520541070.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:10.552Z,1520541070.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T20:31:10.553Z,1520541070.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:10.918Z,1520541070.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:10.949Z,1520541070.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T20:31:10.950Z,1520541070.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:11.334Z,1520541071.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:11.361Z,1520541071.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T20:31:11.362Z,1520541071.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:11.734Z,1520541071.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:11.770Z,1520541071.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T20:31:11.771Z,1520541071.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:12.137Z,1520541072.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:12.162Z,1520541072.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T20:31:12.163Z,1520541072.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:12.520Z,1520541072.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:12.536Z,1520541072.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T20:31:12.537Z,1520541072.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:12.926Z,1520541072.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:12.962Z,1520541072.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T20:31:12.963Z,1520541072.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:13.323Z,1520541073.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:13.339Z,1520541073.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T20:31:13.340Z,1520541073.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:13.724Z,1520541073.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:13.743Z,1520541073.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T20:31:13.744Z,1520541073.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:14.138Z,1520541074.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:14.167Z,1520541074.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T20:31:14.168Z,1520541074.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:14.537Z,1520541074.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:14.564Z,1520541074.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T20:31:14.565Z,1520541074.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:14.938Z,1520541074.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:14.966Z,1520541074.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T20:31:14.967Z,1520541074.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:15.323Z,1520541075.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:15.346Z,1520541075.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T20:31:15.347Z,1520541075.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:15.728Z,1520541075.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:15.744Z,1520541075.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T20:31:15.745Z,1520541075.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:16.125Z,1520541076.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:16.141Z,1520541076.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T20:31:16.142Z,1520541076.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:16.534Z,1520541076.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:16.548Z,1520541076.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T20:31:16.549Z,1520541076.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:16.929Z,1520541076.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:16.944Z,1520541076.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T20:31:16.945Z,1520541076.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:17.330Z,1520541077.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:17.350Z,1520541077.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T20:31:17.351Z,1520541077.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:17.738Z,1520541077.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:17.753Z,1520541077.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T20:31:17.754Z,1520541077.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:18.134Z,1520541078.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:18.150Z,1520541078.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T20:31:18.151Z,1520541078.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:18.525Z,1520541078.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:18.541Z,1520541078.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T20:31:18.541Z,1520541078.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:18.926Z,1520541078.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:18.953Z,1520541078.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T20:31:18.954Z,1520541078.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:19.333Z,1520541079.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:19.348Z,1520541079.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T20:31:19.349Z,1520541079.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:19.730Z,1520541079.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:19.754Z,1520541079.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T20:31:19.755Z,1520541079.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:20.141Z,1520541080.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:20.156Z,1520541080.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T20:31:20.157Z,1520541080.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:20.537Z,1520541080.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:20.553Z,1520541080.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T20:31:20.554Z,1520541080.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:20.938Z,1520541080.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:20.954Z,1520541080.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T20:31:20.955Z,1520541080.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:21.331Z,1520541081.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:21.355Z,1520541081.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T20:31:21.356Z,1520541081.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:21.719Z,1520541081.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:21.747Z,1520541081.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T20:31:21.748Z,1520541081.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:22.112Z,1520541082.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:22.139Z,1520541082.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T20:31:22.140Z,1520541082.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:22.523Z,1520541082.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:22.551Z,1520541082.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T20:31:22.552Z,1520541082.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:22.914Z,1520541082.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:22.949Z,1520541082.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T20:31:22.950Z,1520541082.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:26.045Z,1520541086.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:26.060Z,1520541086.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:26.170Z,1520541086.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:26.214Z,1520541086.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:26.549Z,1520541086.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:26.565Z,1520541086.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:26.917Z,1520541086.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:26.950Z,1520541086.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:27.324Z,1520541087.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:27.351Z,1520541087.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:27.722Z,1520541087.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:27.767Z,1520541087.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:28.142Z,1520541088.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:28.158Z,1520541088.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:28.546Z,1520541088.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:28.566Z,1520541088.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:28.947Z,1520541088.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:28.961Z,1520541088.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:29.320Z,1520541089.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:29.355Z,1520541089.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:29.722Z,1520541089.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:29.749Z,1520541089.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:30.118Z,1520541090.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:30.158Z,1520541090.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:30.528Z,1520541090.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:30.555Z,1520541090.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:30.922Z,1520541090.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:30.954Z,1520541090.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:31.339Z,1520541091.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:31.354Z,1520541091.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:31.742Z,1520541091.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:31.757Z,1520541091.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:32.138Z,1520541092.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:32.168Z,1520541092.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:32.526Z,1520541092.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:32.556Z,1520541092.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:32.916Z,1520541092.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:32.944Z,1520541092.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:33.327Z,1520541093.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:33.354Z,1520541093.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:33.722Z,1520541093.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:33.756Z,1520541093.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:34.137Z,1520541094.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:34.160Z,1520541094.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:34.546Z,1520541094.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:34.562Z,1520541094.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:34.929Z,1520541094.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:34.961Z,1520541094.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:35.321Z,1520541095.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:35.345Z,1520541095.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:35.726Z,1520541095.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:35.758Z,1520541095.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:36.126Z,1520541096.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:36.160Z,1520541096.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:36.519Z,1520541096.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:36.535Z,1520541096.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:36.926Z,1520541096.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:36.962Z,1520541096.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:37.338Z,1520541097.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:37.366Z,1520541097.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:37.734Z,1520541097.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:37.760Z,1520541097.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:38.134Z,1520541098.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:38.160Z,1520541098.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:38.522Z,1520541098.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:38.539Z,1520541098.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:38.920Z,1520541098.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:38.936Z,1520541098.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:39.327Z,1520541099.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:39.343Z,1520541099.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:39.730Z,1520541099.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:39.746Z,1520541099.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:40.138Z,1520541100.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:40.169Z,1520541100.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:40.546Z,1520541100.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:40.575Z,1520541100.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:40.942Z,1520541100.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:40.965Z,1520541100.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:41.323Z,1520541101.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:41.339Z,1520541101.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:41.730Z,1520541101.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:41.767Z,1520541101.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:42.149Z,1520541102.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:42.222Z,1520541102.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:42.540Z,1520541102.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:42.585Z,1520541102.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:42.938Z,1520541102.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:42.977Z,1520541102.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:43.336Z,1520541103.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:43.352Z,1520541103.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:43.746Z,1520541103.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:43.787Z,1520541103.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:44.144Z,1520541104.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:44.166Z,1520541104.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:44.526Z,1520541104.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:44.555Z,1520541104.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:44.920Z,1520541104.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:44.959Z,1520541104.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:45.323Z,1520541105.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:45.359Z,1520541105.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:45.731Z,1520541105.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:45.747Z,1520541105.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:46.144Z,1520541106.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:46.173Z,1520541106.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:46.538Z,1520541106.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:46.553Z,1520541106.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:46.934Z,1520541106.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:46.954Z,1520541106.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:47.327Z,1520541107.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:47.346Z,1520541107.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:47.732Z,1520541107.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:47.748Z,1520541107.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:48.131Z,1520541108.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:48.147Z,1520541108.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:48.528Z,1520541108.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:48.545Z,1520541108.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:48.931Z,1520541108.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:48.947Z,1520541108.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:49.334Z,1520541109.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:49.349Z,1520541109.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:49.735Z,1520541109.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:49.750Z,1520541109.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:50.146Z,1520541110.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:50.175Z,1520541110.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:50.527Z,1520541110.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:50.543Z,1520541110.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:50.927Z,1520541110.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:50.943Z,1520541110.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:51.330Z,1520541111.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:51.350Z,1520541111.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:51.731Z,1520541111.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:51.748Z,1520541111.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:52.131Z,1520541112.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:52.154Z,1520541112.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:52.546Z,1520541112.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:52.577Z,1520541112.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:52.937Z,1520541112.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:52.952Z,1520541112.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:53.329Z,1520541113.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:53.345Z,1520541113.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:53.730Z,1520541113.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:53.750Z,1520541113.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:54.124Z,1520541114.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:54.150Z,1520541114.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:54.537Z,1520541114.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:54.552Z,1520541114.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:54.930Z,1520541114.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:54.950Z,1520541114.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:55.338Z,1520541115.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:55.353Z,1520541115.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:55.742Z,1520541115.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:55.757Z,1520541115.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:56.138Z,1520541116.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:56.153Z,1520541116.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:56.532Z,1520541116.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:56.549Z,1520541116.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:56.925Z,1520541116.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:56.957Z,1520541116.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:57.334Z,1520541117.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:57.355Z,1520541117.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:57.737Z,1520541117.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:57.752Z,1520541117.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:58.143Z,1520541118.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:58.162Z,1520541118.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:58.546Z,1520541118.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:58.567Z,1520541118.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:58.947Z,1520541118.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:58.962Z,1520541118.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:59.321Z,1520541119.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:59.354Z,1520541119.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:31:59.375Z,1520541119.375 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T20:31:59.723Z,1520541119.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:31:59.754Z,1520541119.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:00.127Z,1520541120.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:00.161Z,1520541120.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:00.519Z,1520541120.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:00.536Z,1520541120.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:00.922Z,1520541120.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:00.939Z,1520541120.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:01.339Z,1520541121.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:01.368Z,1520541121.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:01.734Z,1520541121.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:01.766Z,1520541121.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:02.143Z,1520541122.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:02.167Z,1520541122.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:02.527Z,1520541122.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:02.543Z,1520541122.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:02.922Z,1520541122.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:02.939Z,1520541122.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:03.331Z,1520541123.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:03.347Z,1520541123.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:03.730Z,1520541123.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:03.746Z,1520541123.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:04.130Z,1520541124.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:04.150Z,1520541124.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:04.538Z,1520541124.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:04.553Z,1520541124.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:04.946Z,1520541124.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:04.983Z,1520541124.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:05.320Z,1520541125.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:05.347Z,1520541125.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:05.731Z,1520541125.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:05.747Z,1520541125.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:06.131Z,1520541126.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:06.148Z,1520541126.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:06.528Z,1520541126.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:06.545Z,1520541126.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:06.930Z,1520541126.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:06.950Z,1520541126.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:07.346Z,1520541127.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:07.382Z,1520541127.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:07.734Z,1520541127.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:07.749Z,1520541127.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:08.134Z,1520541128.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:08.149Z,1520541128.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:08.530Z,1520541128.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:08.546Z,1520541128.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:08.927Z,1520541128.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:08.954Z,1520541128.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:09.344Z,1520541129.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:09.452Z,1520541129.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:09.726Z,1520541129.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:09.742Z,1520541129.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:10.138Z,1520541130.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:10.153Z,1520541130.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:10.537Z,1520541130.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:10.552Z,1520541130.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:10.938Z,1520541130.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:10.953Z,1520541130.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:11.337Z,1520541131.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:11.364Z,1520541131.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:11.722Z,1520541131.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:11.750Z,1520541131.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:12.122Z,1520541132.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:12.159Z,1520541132.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:12.519Z,1520541132.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:12.551Z,1520541132.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:12.926Z,1520541132.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:12.954Z,1520541132.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:13.339Z,1520541133.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:13.354Z,1520541133.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:13.742Z,1520541133.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:13.757Z,1520541133.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:14.142Z,1520541134.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:14.157Z,1520541134.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:14.522Z,1520541134.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:14.551Z,1520541134.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:14.920Z,1520541134.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:14.947Z,1520541134.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:15.327Z,1520541135.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:15.354Z,1520541135.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:15.722Z,1520541135.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:15.757Z,1520541135.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:16.141Z,1520541136.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:16.161Z,1520541136.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:16.539Z,1520541136.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:16.566Z,1520541136.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:16.948Z,1520541136.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:16.970Z,1520541136.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:17.323Z,1520541137.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:17.339Z,1520541137.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:17.726Z,1520541137.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:17.743Z,1520541137.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:18.130Z,1520541138.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:18.146Z,1520541138.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:18.521Z,1520541138.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:18.537Z,1520541138.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:18.930Z,1520541138.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:18.967Z,1520541138.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:19.350Z,1520541139.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:19.376Z,1520541139.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:19.731Z,1520541139.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:19.755Z,1520541139.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:20.146Z,1520541140.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:20.181Z,1520541140.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:20.536Z,1520541140.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:20.551Z,1520541140.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:20.919Z,1520541140.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:20.951Z,1520541140.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:21.335Z,1520541141.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:21.350Z,1520541141.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:21.735Z,1520541141.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:21.751Z,1520541141.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:22.135Z,1520541142.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:22.162Z,1520541142.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:22.549Z,1520541142.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:22.570Z,1520541142.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:22.946Z,1520541142.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:22.961Z,1520541142.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:26.032Z,1520541146.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:26.054Z,1520541146.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:26.148Z,1520541146.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:26.193Z,1520541146.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:26.529Z,1520541146.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:26.550Z,1520541146.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:26.921Z,1520541146.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:26.945Z,1520541146.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:27.318Z,1520541147.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:27.343Z,1520541147.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:27.708Z,1520541147.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:27.723Z,1520541147.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:28.110Z,1520541148.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:28.125Z,1520541148.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:28.507Z,1520541148.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:28.523Z,1520541148.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:28.910Z,1520541148.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:28.930Z,1520541148.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:29.321Z,1520541149.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:29.359Z,1520541149.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:29.713Z,1520541149.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:29.728Z,1520541149.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:30.121Z,1520541150.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:30.153Z,1520541150.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:30.511Z,1520541150.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:30.526Z,1520541150.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:30.907Z,1520541150.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:30.933Z,1520541150.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:31.312Z,1520541151.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:31.327Z,1520541151.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:31.711Z,1520541151.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:31.726Z,1520541151.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:32.118Z,1520541152.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:32.134Z,1520541152.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:32.525Z,1520541152.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:32.561Z,1520541152.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:32.917Z,1520541152.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:32.939Z,1520541152.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:33.306Z,1520541153.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:33.321Z,1520541153.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:33.713Z,1520541153.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:33.728Z,1520541153.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:34.108Z,1520541154.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:34.123Z,1520541154.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:34.505Z,1520541154.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:34.530Z,1520541154.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:34.915Z,1520541154.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:34.930Z,1520541154.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:35.317Z,1520541155.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:35.333Z,1520541155.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:35.722Z,1520541155.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:35.738Z,1520541155.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:36.117Z,1520541156.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:36.133Z,1520541156.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:36.512Z,1520541156.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:36.527Z,1520541156.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:36.909Z,1520541156.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:36.925Z,1520541156.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:37.315Z,1520541157.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:37.330Z,1520541157.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:37.715Z,1520541157.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:37.730Z,1520541157.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:38.115Z,1520541158.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:38.139Z,1520541158.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:38.522Z,1520541158.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:38.544Z,1520541158.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:38.908Z,1520541158.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:38.935Z,1520541158.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:39.300Z,1520541159.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:39.335Z,1520541159.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:39.703Z,1520541159.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:39.729Z,1520541159.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:40.098Z,1520541160.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:40.131Z,1520541160.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:40.507Z,1520541160.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:40.534Z,1520541160.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:40.902Z,1520541160.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:40.928Z,1520541160.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:41.313Z,1520541161.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:41.337Z,1520541161.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:41.719Z,1520541161.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:41.741Z,1520541161.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:42.125Z,1520541162.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:42.141Z,1520541162.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:42.506Z,1520541162.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:42.534Z,1520541162.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:42.896Z,1520541162.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:42.923Z,1520541162.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:43.307Z,1520541163.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:43.334Z,1520541163.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:43.698Z,1520541163.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:43.735Z,1520541163.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:44.109Z,1520541164.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:44.144Z,1520541164.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:44.536Z,1520541164.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:44.551Z,1520541164.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:44.924Z,1520541164.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:44.940Z,1520541164.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:45.300Z,1520541165.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:45.328Z,1520541165.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:45.706Z,1520541165.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:45.738Z,1520541165.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:46.106Z,1520541166.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:46.140Z,1520541166.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:46.503Z,1520541166.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:46.536Z,1520541166.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:46.902Z,1520541166.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:46.943Z,1520541166.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:47.315Z,1520541167.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:47.364Z,1520541167.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:47.715Z,1520541167.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:47.751Z,1520541167.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:48.123Z,1520541168.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:48.166Z,1520541168.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:48.519Z,1520541168.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:48.567Z,1520541168.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:48.909Z,1520541168.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:48.924Z,1520541168.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:49.309Z,1520541169.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:49.325Z,1520541169.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:49.710Z,1520541169.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:49.725Z,1520541169.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:50.109Z,1520541170.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:50.125Z,1520541170.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:50.525Z,1520541170.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:50.556Z,1520541170.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:50.917Z,1520541170.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:50.956Z,1520541170.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:51.300Z,1520541171.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:51.319Z,1520541171.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:51.708Z,1520541171.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:51.731Z,1520541171.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:52.111Z,1520541172.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:52.126Z,1520541172.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:52.512Z,1520541172.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:52.527Z,1520541172.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:52.908Z,1520541172.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:52.931Z,1520541172.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:53.317Z,1520541173.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:53.339Z,1520541173.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:53.718Z,1520541173.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:53.733Z,1520541173.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:54.125Z,1520541174.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:54.161Z,1520541174.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:54.513Z,1520541174.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:54.528Z,1520541174.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:54.905Z,1520541174.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:54.925Z,1520541174.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:55.315Z,1520541175.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:55.330Z,1520541175.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:55.715Z,1520541175.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:55.730Z,1520541175.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:56.117Z,1520541176.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:56.145Z,1520541176.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:56.523Z,1520541176.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:56.539Z,1520541176.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:56.921Z,1520541176.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:56.939Z,1520541176.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:57.300Z,1520541177.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:57.332Z,1520541177.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:57.714Z,1520541177.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:57.735Z,1520541177.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:58.116Z,1520541178.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:58.132Z,1520541178.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:58.499Z,1520541178.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:58.530Z,1520541178.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:58.904Z,1520541178.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:58.935Z,1520541178.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:59.325Z,1520541179.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:59.347Z,1520541179.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:32:59.715Z,1520541179.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:32:59.731Z,1520541179.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:00.121Z,1520541180.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:00.137Z,1520541180.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:00.515Z,1520541180.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:00.539Z,1520541180.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:00.900Z,1520541180.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:00.932Z,1520541180.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:01.307Z,1520541181.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:01.334Z,1520541181.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:01.702Z,1520541181.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:01.735Z,1520541181.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:02.117Z,1520541182.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:02.132Z,1520541182.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:02.525Z,1520541182.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:02.541Z,1520541182.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:02.922Z,1520541182.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:02.938Z,1520541182.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:03.302Z,1520541183.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:03.328Z,1520541183.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:03.703Z,1520541183.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:03.739Z,1520541183.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:04.107Z,1520541184.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:04.139Z,1520541184.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:04.503Z,1520541184.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:04.531Z,1520541184.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:04.906Z,1520541184.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:04.932Z,1520541184.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:05.321Z,1520541185.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:05.338Z,1520541185.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:05.726Z,1520541185.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:05.742Z,1520541185.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:06.125Z,1520541186.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:06.141Z,1520541186.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:06.502Z,1520541186.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:06.539Z,1520541186.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:06.906Z,1520541186.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:06.938Z,1520541186.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:07.307Z,1520541187.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:07.339Z,1520541187.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:07.702Z,1520541187.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:07.742Z,1520541187.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:08.113Z,1520541188.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:08.140Z,1520541188.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:08.525Z,1520541188.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:08.545Z,1520541188.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:08.913Z,1520541188.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:08.947Z,1520541188.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:09.302Z,1520541189.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:09.338Z,1520541189.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:09.706Z,1520541189.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:09.739Z,1520541189.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:10.102Z,1520541190.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:10.134Z,1520541190.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:10.508Z,1520541190.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:10.543Z,1520541190.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:10.906Z,1520541190.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:10.943Z,1520541190.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:11.321Z,1520541191.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:11.346Z,1520541191.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:11.725Z,1520541191.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:11.751Z,1520541191.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:12.121Z,1520541192.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:12.147Z,1520541192.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:12.503Z,1520541192.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:12.520Z,1520541192.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:12.909Z,1520541192.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:12.924Z,1520541192.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:13.313Z,1520541193.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:13.328Z,1520541193.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:13.712Z,1520541193.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:13.728Z,1520541193.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:14.126Z,1520541194.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:14.156Z,1520541194.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:14.526Z,1520541194.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:14.558Z,1520541194.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:14.918Z,1520541194.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:14.934Z,1520541194.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:15.312Z,1520541195.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:15.329Z,1520541195.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:15.708Z,1520541195.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:15.732Z,1520541195.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:16.107Z,1520541196.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:16.122Z,1520541196.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:16.501Z,1520541196.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:16.529Z,1520541196.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:16.914Z,1520541196.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:16.935Z,1520541196.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:17.321Z,1520541197.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:17.337Z,1520541197.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:17.719Z,1520541197.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:17.735Z,1520541197.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:18.120Z,1520541198.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:18.146Z,1520541198.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:18.515Z,1520541198.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:18.530Z,1520541198.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:18.914Z,1520541198.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:18.935Z,1520541198.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:19.315Z,1520541199.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:19.331Z,1520541199.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:19.698Z,1520541199.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:19.725Z,1520541199.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:20.128Z,1520541200.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:20.151Z,1520541200.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:20.527Z,1520541200.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:20.543Z,1520541200.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:20.925Z,1520541200.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:20.941Z,1520541200.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:21.302Z,1520541201.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:21.335Z,1520541201.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:21.702Z,1520541201.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:21.728Z,1520541201.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:22.102Z,1520541202.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:22.142Z,1520541202.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:22.507Z,1520541202.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:22.534Z,1520541202.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:22.902Z,1520541202.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:22.929Z,1520541202.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:23.313Z,1520541203.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:23.345Z,1520541203.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:26.527Z,1520541206.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:26.590Z,1520541206.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:26.705Z,1520541206.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:26.736Z,1520541206.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:27.074Z,1520541207.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:27.118Z,1520541207.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:27.466Z,1520541207.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:27.509Z,1520541207.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:27.869Z,1520541207.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:27.911Z,1520541207.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:28.271Z,1520541208.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:28.286Z,1520541208.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:28.673Z,1520541208.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:28.710Z,1520541208.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:29.067Z,1520541209.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:29.088Z,1520541209.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:29.469Z,1520541209.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:29.485Z,1520541209.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:29.871Z,1520541209.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:29.886Z,1520541209.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:30.266Z,1520541210.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:30.308Z,1520541210.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:30.656Z,1520541210.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:30.688Z,1520541210.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:31.072Z,1520541211.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:31.087Z,1520541211.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:31.474Z,1520541211.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:31.495Z,1520541211.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:31.873Z,1520541211.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:31.899Z,1520541211.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:32.257Z,1520541212.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:32.288Z,1520541212.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:32.657Z,1520541212.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:32.691Z,1520541212.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:33.080Z,1520541213.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:33.102Z,1520541213.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:33.479Z,1520541213.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:33.522Z,1520541213.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:33.876Z,1520541213.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:33.916Z,1520541213.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:34.251Z,1520541214.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:34.291Z,1520541214.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:34.670Z,1520541214.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:34.691Z,1520541214.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:35.077Z,1520541215.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:35.116Z,1520541215.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:35.474Z,1520541215.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:35.503Z,1520541215.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:35.880Z,1520541215.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:35.897Z,1520541215.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:36.255Z,1520541216.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:36.287Z,1520541216.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:36.659Z,1520541216.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:36.699Z,1520541216.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:37.079Z,1520541217.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:37.095Z,1520541217.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:37.485Z,1520541217.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:37.506Z,1520541217.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:37.880Z,1520541217.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:37.895Z,1520541217.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:38.259Z,1520541218.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:38.302Z,1520541218.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:38.658Z,1520541218.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:38.690Z,1520541218.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:39.073Z,1520541219.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:39.092Z,1520541219.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:39.482Z,1520541219.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:39.498Z,1520541219.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:39.865Z,1520541219.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:39.906Z,1520541219.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:40.259Z,1520541220.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:40.296Z,1520541220.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:40.658Z,1520541220.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:40.690Z,1520541220.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:41.067Z,1520541221.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:41.102Z,1520541221.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:41.483Z,1520541221.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:41.502Z,1520541221.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:41.870Z,1520541221.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:41.937Z,1520541221.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:42.283Z,1520541222.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:42.307Z,1520541222.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:42.660Z,1520541222.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:42.676Z,1520541222.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:43.067Z,1520541223.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:43.111Z,1520541223.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:43.488Z,1520541223.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:43.510Z,1520541223.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:43.880Z,1520541223.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:43.904Z,1520541223.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:44.270Z,1520541224.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:44.321Z,1520541224.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:44.675Z,1520541224.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:44.723Z,1520541224.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:45.074Z,1520541225.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:45.108Z,1520541225.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:45.482Z,1520541225.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:45.514Z,1520541225.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:45.868Z,1520541225.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:45.890Z,1520541225.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:46.268Z,1520541226.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:46.305Z,1520541226.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:46.666Z,1520541226.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:46.686Z,1520541226.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:47.070Z,1520541227.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:47.091Z,1520541227.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:47.474Z,1520541227.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:47.489Z,1520541227.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:47.869Z,1520541227.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:47.909Z,1520541227.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:48.261Z,1520541228.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:48.291Z,1520541228.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:48.669Z,1520541228.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:48.685Z,1520541228.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:49.076Z,1520541229.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:49.092Z,1520541229.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:49.473Z,1520541229.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:49.514Z,1520541229.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:49.873Z,1520541229.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:49.892Z,1520541229.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:50.276Z,1520541230.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:50.292Z,1520541230.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:50.669Z,1520541230.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:50.691Z,1520541230.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:51.042Z,1520541231.042 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T20:33:51.042Z,1520541231.042 [NAL9602] Data Fault, FailCount= 1
2018-03-08T20:33:51.042Z,1520541231.042 [NAL9602](ERROR): Data Fault
2018-03-08T20:33:51.078Z,1520541231.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:51.112Z,1520541231.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:51.124Z,1520541231.124 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T20:33:51.442Z,1520541231.442 [NAL9602](INFO): Powering down
2018-03-08T20:33:51.475Z,1520541231.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:51.518Z,1520541231.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:51.863Z,1520541231.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:51.882Z,1520541231.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:52.271Z,1520541232.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:52.286Z,1520541232.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:52.298Z,1520541232.298 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T20:33:52.298Z,1520541232.298 [NAL9602] No Fault, FailCount= 1
2018-03-08T20:33:52.666Z,1520541232.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:52.698Z,1520541232.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:53.066Z,1520541233.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:53.087Z,1520541233.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:53.468Z,1520541233.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:53.485Z,1520541233.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:53.871Z,1520541233.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:53.886Z,1520541233.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:54.261Z,1520541234.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:54.296Z,1520541234.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:54.665Z,1520541234.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:54.685Z,1520541234.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:55.068Z,1520541235.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:55.085Z,1520541235.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:55.464Z,1520541235.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:55.488Z,1520541235.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:55.847Z,1520541235.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:55.893Z,1520541235.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:56.266Z,1520541236.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:56.286Z,1520541236.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:56.662Z,1520541236.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:56.681Z,1520541236.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:57.065Z,1520541237.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:57.091Z,1520541237.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:57.461Z,1520541237.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:57.496Z,1520541237.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:57.866Z,1520541237.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:57.887Z,1520541237.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:58.268Z,1520541238.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:58.284Z,1520541238.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:58.668Z,1520541238.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:58.684Z,1520541238.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:59.061Z,1520541239.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:59.096Z,1520541239.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:59.467Z,1520541239.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:59.486Z,1520541239.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:33:59.869Z,1520541239.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:33:59.886Z,1520541239.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:00.271Z,1520541240.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:00.286Z,1520541240.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:00.664Z,1520541240.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:00.698Z,1520541240.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:01.062Z,1520541241.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:01.082Z,1520541241.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:01.474Z,1520541241.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:01.489Z,1520541241.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:01.949Z,1520541241.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:01.972Z,1520541241.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:02.264Z,1520541242.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:02.298Z,1520541242.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:02.682Z,1520541242.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:02.722Z,1520541242.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:03.064Z,1520541243.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:03.093Z,1520541243.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:03.468Z,1520541243.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:03.484Z,1520541243.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:03.895Z,1520541243.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:03.914Z,1520541243.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:04.262Z,1520541244.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:04.294Z,1520541244.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:04.653Z,1520541244.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:04.693Z,1520541244.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:05.064Z,1520541245.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:05.090Z,1520541245.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:05.462Z,1520541245.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:05.578Z,1520541245.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:05.851Z,1520541245.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:05.866Z,1520541245.866 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:05.866Z,1520541245.866 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 256
2018-03-08T20:34:05.866Z,1520541245.866 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T20:34:05.868Z,1520541245.868 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:05.868Z,1520541245.868 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 256
2018-03-08T20:34:05.868Z,1520541245.868 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T20:34:05.870Z,1520541245.870 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:05.870Z,1520541245.870 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 256
2018-03-08T20:34:05.870Z,1520541245.870 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T20:34:05.904Z,1520541245.904 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T20:34:05.904Z,1520541245.904 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T20:34:05.909Z,1520541245.909 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T20:34:06.272Z,1520541246.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:06.314Z,1520541246.314 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T20:34:06.314Z,1520541246.314 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 256
2018-03-08T20:34:06.314Z,1520541246.314 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T20:34:06.314Z,1520541246.314 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 256
2018-03-08T20:34:06.315Z,1520541246.315 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T20:34:06.315Z,1520541246.315 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 256
2018-03-08T20:34:06.655Z,1520541246.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:06.672Z,1520541246.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T20:34:06.673Z,1520541246.673 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:34:06.673Z,1520541246.673 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:34:06.673Z,1520541246.673 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T20:34:06.674Z,1520541246.674 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:34:06.674Z,1520541246.674 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:34:06.674Z,1520541246.674 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T20:34:06.675Z,1520541246.675 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:34:06.675Z,1520541246.675 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:34:07.058Z,1520541247.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:07.100Z,1520541247.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T20:34:07.101Z,1520541247.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:07.460Z,1520541247.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:07.479Z,1520541247.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T20:34:07.489Z,1520541247.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:07.863Z,1520541247.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:07.881Z,1520541247.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T20:34:07.882Z,1520541247.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:08.266Z,1520541248.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:08.281Z,1520541248.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T20:34:08.282Z,1520541248.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:08.660Z,1520541248.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:08.698Z,1520541248.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T20:34:08.698Z,1520541248.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:09.057Z,1520541249.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:09.073Z,1520541249.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T20:34:09.075Z,1520541249.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:09.464Z,1520541249.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:09.483Z,1520541249.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T20:34:09.484Z,1520541249.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:09.866Z,1520541249.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:09.881Z,1520541249.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T20:34:09.882Z,1520541249.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:10.263Z,1520541250.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:10.292Z,1520541250.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T20:34:10.311Z,1520541250.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:10.659Z,1520541250.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:10.678Z,1520541250.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T20:34:10.679Z,1520541250.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:11.065Z,1520541251.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:11.082Z,1520541251.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T20:34:11.083Z,1520541251.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:11.465Z,1520541251.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:11.480Z,1520541251.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T20:34:11.481Z,1520541251.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:11.859Z,1520541251.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:11.906Z,1520541251.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T20:34:11.907Z,1520541251.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:12.261Z,1520541252.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:12.285Z,1520541252.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T20:34:12.286Z,1520541252.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:12.664Z,1520541252.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:12.682Z,1520541252.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T20:34:12.683Z,1520541252.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:13.062Z,1520541253.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:13.077Z,1520541253.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T20:34:13.078Z,1520541253.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:13.463Z,1520541253.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:13.505Z,1520541253.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T20:34:13.506Z,1520541253.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:13.861Z,1520541253.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:13.880Z,1520541253.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T20:34:13.882Z,1520541253.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:14.257Z,1520541254.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:14.278Z,1520541254.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T20:34:14.279Z,1520541254.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:14.663Z,1520541254.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:14.682Z,1520541254.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T20:34:14.683Z,1520541254.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:15.061Z,1520541255.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:15.094Z,1520541255.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T20:34:15.094Z,1520541255.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:15.462Z,1520541255.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:15.499Z,1520541255.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T20:34:15.500Z,1520541255.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:15.859Z,1520541255.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:15.887Z,1520541255.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T20:34:15.888Z,1520541255.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:16.264Z,1520541256.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:16.279Z,1520541256.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T20:34:16.280Z,1520541256.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:16.655Z,1520541256.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:16.700Z,1520541256.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T20:34:16.701Z,1520541256.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:17.060Z,1520541257.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:17.079Z,1520541257.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T20:34:17.097Z,1520541257.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:17.463Z,1520541257.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:17.481Z,1520541257.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T20:34:17.482Z,1520541257.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:17.856Z,1520541257.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:17.873Z,1520541257.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T20:34:17.874Z,1520541257.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:18.262Z,1520541258.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:18.310Z,1520541258.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T20:34:18.311Z,1520541258.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:18.658Z,1520541258.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:18.675Z,1520541258.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T20:34:18.677Z,1520541258.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:19.054Z,1520541259.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:19.075Z,1520541259.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T20:34:19.076Z,1520541259.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:19.465Z,1520541259.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:19.480Z,1520541259.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T20:34:19.481Z,1520541259.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:19.863Z,1520541259.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:19.906Z,1520541259.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T20:34:19.907Z,1520541259.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:20.255Z,1520541260.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:20.270Z,1520541260.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T20:34:20.272Z,1520541260.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:20.659Z,1520541260.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:20.683Z,1520541260.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T20:34:20.684Z,1520541260.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:21.061Z,1520541261.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:21.076Z,1520541261.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T20:34:21.078Z,1520541261.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:21.461Z,1520541261.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:21.501Z,1520541261.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T20:34:21.502Z,1520541261.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:21.847Z,1520541261.847 [NAL9602](INFO): Powering up NAL9602
2018-03-08T20:34:21.864Z,1520541261.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:21.884Z,1520541261.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T20:34:21.885Z,1520541261.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:22.261Z,1520541262.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:22.280Z,1520541262.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T20:34:22.281Z,1520541262.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:22.284Z,1520541262.284 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T20:34:22.284Z,1520541262.284 [Default:CheckIn:C.Wait] Stopped
2018-03-08T20:34:22.284Z,1520541262.284 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T20:34:22.284Z,1520541262.284 [Default:CheckIn:D] Running Loop=1
2018-03-08T20:34:22.668Z,1520541262.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:22.683Z,1520541262.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T20:34:22.684Z,1520541262.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:22.687Z,1520541262.687 [Default:CheckIn:D] Stopped
2018-03-08T20:34:22.687Z,1520541262.687 [Default:CheckIn:E] Running Loop=1
2018-03-08T20:34:23.065Z,1520541263.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:23.105Z,1520541263.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T20:34:23.106Z,1520541263.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:23.109Z,1520541263.109 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 768.631380 min 
2018-03-08T20:34:23.110Z,1520541263.110 [Default:CheckIn:E] Stopped
2018-03-08T20:34:23.110Z,1520541263.110 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T20:34:23.110Z,1520541263.110 [Default:CheckIn] Stopped
2018-03-08T20:34:23.110Z,1520541263.110 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T20:34:23.110Z,1520541263.110 [Default:CheckIn](INFO): Running loop #75
2018-03-08T20:34:23.110Z,1520541263.110 [Default:CheckIn] Running Loop=75
2018-03-08T20:34:23.110Z,1520541263.110 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T20:34:23.110Z,1520541263.110 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T20:34:23.461Z,1520541263.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:23.481Z,1520541263.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T20:34:23.482Z,1520541263.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:26.734Z,1520541266.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:26.762Z,1520541266.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:26.853Z,1520541266.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:26.890Z,1520541266.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:27.218Z,1520541267.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:27.233Z,1520541267.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:27.617Z,1520541267.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:27.632Z,1520541267.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:28.023Z,1520541268.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:28.038Z,1520541268.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:28.419Z,1520541268.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:28.434Z,1520541268.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:28.811Z,1520541268.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:28.826Z,1520541268.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:29.219Z,1520541269.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:29.234Z,1520541269.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:29.619Z,1520541269.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:29.633Z,1520541269.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:30.015Z,1520541270.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:30.030Z,1520541270.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:30.420Z,1520541270.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:30.435Z,1520541270.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:30.819Z,1520541270.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:30.834Z,1520541270.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:31.215Z,1520541271.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:31.230Z,1520541271.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:31.614Z,1520541271.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:31.629Z,1520541271.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:32.016Z,1520541272.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:32.030Z,1520541272.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:32.419Z,1520541272.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:32.435Z,1520541272.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:32.802Z,1520541272.802 [NAL9602](INFO): NAL9602 initialized
2018-03-08T20:34:32.819Z,1520541272.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:32.834Z,1520541272.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:33.220Z,1520541273.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:33.235Z,1520541273.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:33.633Z,1520541273.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:33.664Z,1520541273.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:34.025Z,1520541274.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:34.040Z,1520541274.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:34.433Z,1520541274.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:34.464Z,1520541274.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:34.807Z,1520541274.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:34.843Z,1520541274.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:35.222Z,1520541275.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:35.237Z,1520541275.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:35.619Z,1520541275.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:35.638Z,1520541275.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:36.024Z,1520541276.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:36.047Z,1520541276.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:36.425Z,1520541276.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:36.441Z,1520541276.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:36.824Z,1520541276.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:36.839Z,1520541276.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:37.216Z,1520541277.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:37.232Z,1520541277.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:37.622Z,1520541277.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:37.638Z,1520541277.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:38.023Z,1520541278.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:38.038Z,1520541278.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:38.422Z,1520541278.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:38.438Z,1520541278.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:38.825Z,1520541278.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:38.841Z,1520541278.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:39.229Z,1520541279.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:39.244Z,1520541279.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:39.623Z,1520541279.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:39.639Z,1520541279.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:40.023Z,1520541280.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:40.038Z,1520541280.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:40.423Z,1520541280.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:40.438Z,1520541280.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:40.816Z,1520541280.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:40.832Z,1520541280.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:41.215Z,1520541281.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:41.245Z,1520541281.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:41.619Z,1520541281.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:41.634Z,1520541281.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:42.023Z,1520541282.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:42.040Z,1520541282.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:42.429Z,1520541282.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:42.445Z,1520541282.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:42.825Z,1520541282.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:42.840Z,1520541282.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:43.211Z,1520541283.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:43.237Z,1520541283.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:43.622Z,1520541283.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:43.642Z,1520541283.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:44.025Z,1520541284.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:44.039Z,1520541284.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:44.422Z,1520541284.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:44.442Z,1520541284.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:44.828Z,1520541284.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:44.844Z,1520541284.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:45.229Z,1520541285.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:45.244Z,1520541285.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:45.628Z,1520541285.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:45.643Z,1520541285.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:46.023Z,1520541286.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:46.042Z,1520541286.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:46.423Z,1520541286.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:46.442Z,1520541286.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:46.816Z,1520541286.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:46.833Z,1520541286.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:47.223Z,1520541287.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:47.238Z,1520541287.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:47.618Z,1520541287.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:47.638Z,1520541287.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:48.028Z,1520541288.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:48.043Z,1520541288.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:48.429Z,1520541288.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:48.450Z,1520541288.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:48.828Z,1520541288.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:48.844Z,1520541288.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:49.210Z,1520541289.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:49.234Z,1520541289.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:49.619Z,1520541289.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:49.635Z,1520541289.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:50.015Z,1520541290.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:50.038Z,1520541290.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:50.422Z,1520541290.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:50.437Z,1520541290.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:50.829Z,1520541290.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:50.844Z,1520541290.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:51.232Z,1520541291.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:51.247Z,1520541291.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:51.629Z,1520541291.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:51.650Z,1520541291.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:52.022Z,1520541292.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:52.042Z,1520541292.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:52.420Z,1520541292.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:52.435Z,1520541292.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:52.817Z,1520541292.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:52.839Z,1520541292.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:53.218Z,1520541293.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:53.238Z,1520541293.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:53.624Z,1520541293.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:53.639Z,1520541293.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:54.031Z,1520541294.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:54.046Z,1520541294.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:54.433Z,1520541294.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:54.449Z,1520541294.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:54.834Z,1520541294.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:54.849Z,1520541294.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:55.225Z,1520541295.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:55.240Z,1520541295.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:55.618Z,1520541295.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:55.638Z,1520541295.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:56.026Z,1520541296.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:56.041Z,1520541296.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:56.422Z,1520541296.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:56.445Z,1520541296.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:56.827Z,1520541296.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:56.842Z,1520541296.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:57.233Z,1520541297.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:57.252Z,1520541297.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:57.636Z,1520541297.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:57.651Z,1520541297.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:58.011Z,1520541298.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:58.046Z,1520541298.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:58.415Z,1520541298.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:58.449Z,1520541298.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:58.810Z,1520541298.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:58.847Z,1520541298.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:59.215Z,1520541299.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:59.251Z,1520541299.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:34:59.614Z,1520541299.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:34:59.631Z,1520541299.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:00.030Z,1520541300.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:00.056Z,1520541300.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:00.434Z,1520541300.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:00.460Z,1520541300.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:00.844Z,1520541300.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:00.860Z,1520541300.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:01.216Z,1520541301.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:01.232Z,1520541301.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:01.618Z,1520541301.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:01.634Z,1520541301.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:02.019Z,1520541302.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:02.035Z,1520541302.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:02.419Z,1520541302.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:02.435Z,1520541302.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:02.833Z,1520541302.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:02.863Z,1520541302.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:03.230Z,1520541303.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:03.257Z,1520541303.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:03.633Z,1520541303.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:03.665Z,1520541303.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:04.021Z,1520541304.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:04.037Z,1520541304.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:04.419Z,1520541304.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:04.434Z,1520541304.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:04.809Z,1520541304.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:04.833Z,1520541304.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:05.213Z,1520541305.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:05.229Z,1520541305.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:05.619Z,1520541305.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:05.634Z,1520541305.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:06.025Z,1520541306.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:06.041Z,1520541306.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:06.425Z,1520541306.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:06.440Z,1520541306.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:06.825Z,1520541306.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:06.841Z,1520541306.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:07.222Z,1520541307.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:07.238Z,1520541307.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:07.618Z,1520541307.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:07.633Z,1520541307.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:08.016Z,1520541308.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:08.035Z,1520541308.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:08.405Z,1520541308.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:08.442Z,1520541308.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:08.832Z,1520541308.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:08.848Z,1520541308.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:09.232Z,1520541309.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:09.247Z,1520541309.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:09.632Z,1520541309.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:09.647Z,1520541309.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:10.022Z,1520541310.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:10.038Z,1520541310.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:10.413Z,1520541310.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:10.439Z,1520541310.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:10.823Z,1520541310.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:10.838Z,1520541310.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:11.207Z,1520541311.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:11.238Z,1520541311.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:11.613Z,1520541311.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:11.639Z,1520541311.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:12.025Z,1520541312.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:12.041Z,1520541312.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:12.428Z,1520541312.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:12.444Z,1520541312.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:12.833Z,1520541312.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:12.848Z,1520541312.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:13.222Z,1520541313.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:13.242Z,1520541313.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:13.618Z,1520541313.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:13.634Z,1520541313.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:14.017Z,1520541314.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:14.038Z,1520541314.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:14.406Z,1520541314.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:14.439Z,1520541314.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:14.830Z,1520541314.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:14.845Z,1520541314.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:15.233Z,1520541315.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:15.248Z,1520541315.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:15.632Z,1520541315.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:15.648Z,1520541315.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:16.022Z,1520541316.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:16.037Z,1520541316.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:16.417Z,1520541316.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:16.437Z,1520541316.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:16.806Z,1520541316.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:16.840Z,1520541316.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:17.207Z,1520541317.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:17.239Z,1520541317.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:17.611Z,1520541317.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:17.646Z,1520541317.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:18.033Z,1520541318.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:18.048Z,1520541318.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:18.428Z,1520541318.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:18.444Z,1520541318.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:18.833Z,1520541318.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:18.848Z,1520541318.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:19.221Z,1520541319.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:19.241Z,1520541319.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:19.623Z,1520541319.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:19.638Z,1520541319.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:20.011Z,1520541320.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:20.043Z,1520541320.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:20.414Z,1520541320.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:20.446Z,1520541320.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:20.825Z,1520541320.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:20.841Z,1520541320.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:21.234Z,1520541321.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:21.249Z,1520541321.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:21.634Z,1520541321.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:21.649Z,1520541321.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:22.006Z,1520541322.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:22.034Z,1520541322.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:22.414Z,1520541322.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:22.441Z,1520541322.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:22.806Z,1520541322.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:22.843Z,1520541322.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:23.207Z,1520541323.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:23.242Z,1520541323.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:23.614Z,1520541323.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:23.641Z,1520541323.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:26.733Z,1520541326.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:26.749Z,1520541326.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:26.869Z,1520541326.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:26.902Z,1520541326.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:27.217Z,1520541327.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:27.239Z,1520541327.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:27.602Z,1520541327.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:27.617Z,1520541327.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:28.007Z,1520541328.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:28.022Z,1520541328.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:28.399Z,1520541328.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:28.415Z,1520541328.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:28.817Z,1520541328.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:28.849Z,1520541328.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:29.202Z,1520541329.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:29.217Z,1520541329.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:29.617Z,1520541329.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:29.648Z,1520541329.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:30.002Z,1520541330.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:30.017Z,1520541330.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:30.398Z,1520541330.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:30.417Z,1520541330.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:30.804Z,1520541330.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:30.826Z,1520541330.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:31.204Z,1520541331.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:31.220Z,1520541331.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:31.605Z,1520541331.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:31.620Z,1520541331.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:32.017Z,1520541332.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:32.049Z,1520541332.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:32.408Z,1520541332.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:32.423Z,1520541332.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:32.809Z,1520541332.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:32.825Z,1520541332.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:33.205Z,1520541333.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:33.220Z,1520541333.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:33.604Z,1520541333.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:33.626Z,1520541333.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:34.008Z,1520541334.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:34.023Z,1520541334.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:34.403Z,1520541334.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:34.426Z,1520541334.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:34.810Z,1520541334.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:34.825Z,1520541334.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:35.208Z,1520541335.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:35.231Z,1520541335.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:35.610Z,1520541335.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:35.626Z,1520541335.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:36.007Z,1520541336.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:36.023Z,1520541336.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:36.397Z,1520541336.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:36.418Z,1520541336.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:36.806Z,1520541336.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:36.826Z,1520541336.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:37.207Z,1520541337.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:37.223Z,1520541337.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:37.606Z,1520541337.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:37.623Z,1520541337.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:38.011Z,1520541338.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:38.027Z,1520541338.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:38.412Z,1520541338.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:38.427Z,1520541338.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:38.809Z,1520541338.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:38.824Z,1520541338.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:39.197Z,1520541339.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:39.219Z,1520541339.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:39.603Z,1520541339.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:39.622Z,1520541339.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:40.007Z,1520541340.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:40.022Z,1520541340.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:40.402Z,1520541340.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:40.417Z,1520541340.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:40.812Z,1520541340.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:40.834Z,1520541340.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:41.208Z,1520541341.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:41.223Z,1520541341.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:41.612Z,1520541341.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:41.647Z,1520541341.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:41.994Z,1520541341.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:42.029Z,1520541342.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:42.396Z,1520541342.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:42.441Z,1520541342.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:42.805Z,1520541342.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:42.820Z,1520541342.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:43.206Z,1520541343.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:43.227Z,1520541343.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:43.603Z,1520541343.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:43.622Z,1520541343.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:44.017Z,1520541344.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:44.032Z,1520541344.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:44.419Z,1520541344.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:44.434Z,1520541344.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:44.811Z,1520541344.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:44.835Z,1520541344.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:45.205Z,1520541345.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:45.257Z,1520541345.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:45.607Z,1520541345.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:45.659Z,1520541345.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:45.993Z,1520541345.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:46.019Z,1520541346.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:46.415Z,1520541346.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:46.433Z,1520541346.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:46.813Z,1520541346.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:46.828Z,1520541346.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:47.208Z,1520541347.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:47.224Z,1520541347.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:47.613Z,1520541347.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:47.635Z,1520541347.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:47.990Z,1520541347.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:48.017Z,1520541348.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:48.393Z,1520541348.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:48.424Z,1520541348.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:48.797Z,1520541348.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:48.830Z,1520541348.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:49.191Z,1520541349.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:49.223Z,1520541349.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:49.598Z,1520541349.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:49.624Z,1520541349.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:50.013Z,1520541350.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:50.028Z,1520541350.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:50.417Z,1520541350.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:50.432Z,1520541350.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:50.805Z,1520541350.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:50.827Z,1520541350.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:51.193Z,1520541351.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:51.226Z,1520541351.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:51.597Z,1520541351.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:51.673Z,1520541351.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:51.993Z,1520541351.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:52.020Z,1520541352.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:52.394Z,1520541352.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:52.421Z,1520541352.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:52.813Z,1520541352.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:52.828Z,1520541352.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:53.211Z,1520541353.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:53.238Z,1520541353.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:53.605Z,1520541353.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:53.639Z,1520541353.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:53.998Z,1520541353.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:54.031Z,1520541354.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:54.390Z,1520541354.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:54.459Z,1520541354.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:54.796Z,1520541354.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:54.827Z,1520541354.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:55.200Z,1520541355.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:55.236Z,1520541355.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:55.594Z,1520541355.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:55.611Z,1520541355.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:56.009Z,1520541356.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:56.039Z,1520541356.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:56.409Z,1520541356.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:56.438Z,1520541356.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:56.801Z,1520541356.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:56.816Z,1520541356.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:57.202Z,1520541357.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:57.283Z,1520541357.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:57.595Z,1520541357.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:57.611Z,1520541357.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:57.999Z,1520541357.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:58.014Z,1520541358.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:58.402Z,1520541358.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:58.442Z,1520541358.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:58.813Z,1520541358.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:58.839Z,1520541358.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:59.201Z,1520541359.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:59.216Z,1520541359.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:35:59.613Z,1520541359.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:35:59.637Z,1520541359.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:00.001Z,1520541360.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:00.016Z,1520541360.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:00.395Z,1520541360.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:00.410Z,1520541360.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:00.799Z,1520541360.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:00.815Z,1520541360.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:01.203Z,1520541361.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:01.219Z,1520541361.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:01.599Z,1520541361.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:01.619Z,1520541361.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:02.017Z,1520541362.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:02.048Z,1520541362.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:02.413Z,1520541362.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:02.428Z,1520541362.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:02.817Z,1520541362.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:02.852Z,1520541362.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:03.206Z,1520541363.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:03.221Z,1520541363.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:03.603Z,1520541363.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:03.626Z,1520541363.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:04.006Z,1520541364.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:04.022Z,1520541364.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:04.402Z,1520541364.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:04.417Z,1520541364.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:04.809Z,1520541364.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:04.825Z,1520541364.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:05.207Z,1520541365.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:05.223Z,1520541365.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:05.609Z,1520541365.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:05.625Z,1520541365.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:06.006Z,1520541366.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:06.022Z,1520541366.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:06.402Z,1520541366.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:06.417Z,1520541366.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:06.802Z,1520541366.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:06.822Z,1520541366.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:07.201Z,1520541367.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:07.223Z,1520541367.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:07.593Z,1520541367.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:07.617Z,1520541367.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:08.009Z,1520541368.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:08.024Z,1520541368.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:08.413Z,1520541368.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:08.429Z,1520541368.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:08.809Z,1520541368.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:08.826Z,1520541368.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:09.203Z,1520541369.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:09.226Z,1520541369.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:09.607Z,1520541369.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:09.623Z,1520541369.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:10.005Z,1520541370.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:10.020Z,1520541370.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:10.401Z,1520541370.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:10.422Z,1520541370.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:10.810Z,1520541370.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:10.825Z,1520541370.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:11.213Z,1520541371.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:11.229Z,1520541371.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:11.611Z,1520541371.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:11.630Z,1520541371.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:12.004Z,1520541372.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:12.020Z,1520541372.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:12.407Z,1520541372.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:12.422Z,1520541372.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:12.808Z,1520541372.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:12.823Z,1520541372.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:13.203Z,1520541373.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:13.220Z,1520541373.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:13.590Z,1520541373.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:13.626Z,1520541373.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:14.017Z,1520541374.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:14.033Z,1520541374.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:14.416Z,1520541374.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:14.433Z,1520541374.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:14.816Z,1520541374.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:14.839Z,1520541374.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:15.206Z,1520541375.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:15.227Z,1520541375.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:15.605Z,1520541375.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:15.620Z,1520541375.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:16.001Z,1520541376.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:16.021Z,1520541376.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:16.399Z,1520541376.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:16.421Z,1520541376.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:16.817Z,1520541376.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:16.832Z,1520541376.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:17.213Z,1520541377.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:17.234Z,1520541377.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:17.616Z,1520541377.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:17.639Z,1520541377.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:18.006Z,1520541378.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:18.021Z,1520541378.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:18.394Z,1520541378.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:18.421Z,1520541378.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:18.794Z,1520541378.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:18.826Z,1520541378.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:19.208Z,1520541379.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:19.223Z,1520541379.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:19.606Z,1520541379.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:19.626Z,1520541379.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:20.013Z,1520541380.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:20.028Z,1520541380.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:20.420Z,1520541380.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:20.436Z,1520541380.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:20.813Z,1520541380.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:20.828Z,1520541380.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:21.195Z,1520541381.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:21.222Z,1520541381.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:21.590Z,1520541381.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:21.617Z,1520541381.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:22.007Z,1520541382.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:22.023Z,1520541382.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:22.394Z,1520541382.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:22.427Z,1520541382.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:22.818Z,1520541382.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:22.833Z,1520541382.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:23.221Z,1520541383.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:23.243Z,1520541383.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:23.616Z,1520541383.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:23.631Z,1520541383.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:23.994Z,1520541383.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:24.022Z,1520541384.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:27.102Z,1520541387.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:27.118Z,1520541387.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:27.224Z,1520541387.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:27.270Z,1520541387.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:27.589Z,1520541387.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:27.613Z,1520541387.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:27.985Z,1520541387.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:28.008Z,1520541388.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:28.385Z,1520541388.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:28.417Z,1520541388.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:28.776Z,1520541388.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:28.791Z,1520541388.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:29.177Z,1520541389.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:29.192Z,1520541389.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:29.572Z,1520541389.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:29.587Z,1520541389.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:29.989Z,1520541389.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:30.021Z,1520541390.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:30.385Z,1520541390.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:30.400Z,1520541390.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:30.782Z,1520541390.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:30.798Z,1520541390.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:31.179Z,1520541391.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:31.195Z,1520541391.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:31.579Z,1520541391.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:31.595Z,1520541391.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:31.975Z,1520541391.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:31.990Z,1520541391.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:32.379Z,1520541392.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:32.394Z,1520541392.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:32.794Z,1520541392.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:32.828Z,1520541392.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:33.180Z,1520541393.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:33.195Z,1520541393.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:33.581Z,1520541393.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:33.596Z,1520541393.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:33.979Z,1520541393.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:33.994Z,1520541393.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:34.378Z,1520541394.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:34.393Z,1520541394.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:34.778Z,1520541394.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:34.793Z,1520541394.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:35.181Z,1520541395.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:35.196Z,1520541395.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:35.575Z,1520541395.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:35.590Z,1520541395.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:35.993Z,1520541395.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:36.024Z,1520541396.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:36.385Z,1520541396.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:36.401Z,1520541396.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:36.782Z,1520541396.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:36.802Z,1520541396.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:37.178Z,1520541397.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:37.198Z,1520541397.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:37.579Z,1520541397.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:37.595Z,1520541397.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:37.973Z,1520541397.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:37.993Z,1520541397.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:38.382Z,1520541398.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:38.397Z,1520541398.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:38.785Z,1520541398.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:38.801Z,1520541398.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:39.183Z,1520541399.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:39.206Z,1520541399.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:39.583Z,1520541399.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:39.599Z,1520541399.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:39.979Z,1520541399.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:39.998Z,1520541399.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:40.379Z,1520541400.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:40.395Z,1520541400.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:40.774Z,1520541400.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:40.789Z,1520541400.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:41.183Z,1520541401.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:41.199Z,1520541401.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:41.574Z,1520541401.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:41.589Z,1520541401.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:41.997Z,1520541401.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:42.012Z,1520541402.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:42.389Z,1520541402.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:42.405Z,1520541402.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:42.784Z,1520541402.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:42.799Z,1520541402.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:43.181Z,1520541403.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:43.202Z,1520541403.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:43.566Z,1520541403.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:43.594Z,1520541403.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:43.967Z,1520541403.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:44.002Z,1520541404.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:44.382Z,1520541404.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:44.398Z,1520541404.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:44.793Z,1520541404.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:44.814Z,1520541404.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:45.193Z,1520541405.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:45.208Z,1520541405.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:45.590Z,1520541405.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:45.605Z,1520541405.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:45.984Z,1520541405.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:46.006Z,1520541406.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:46.379Z,1520541406.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:46.398Z,1520541406.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:46.783Z,1520541406.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:46.803Z,1520541406.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:47.165Z,1520541407.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:47.205Z,1520541407.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:47.580Z,1520541407.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:47.595Z,1520541407.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:47.991Z,1520541407.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:48.006Z,1520541408.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:48.385Z,1520541408.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:48.405Z,1520541408.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:48.791Z,1520541408.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:48.806Z,1520541408.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:49.177Z,1520541409.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:49.199Z,1520541409.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:49.562Z,1520541409.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:49.595Z,1520541409.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:49.976Z,1520541409.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:50.013Z,1520541410.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:50.374Z,1520541410.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:50.392Z,1520541410.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:50.789Z,1520541410.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:50.821Z,1520541410.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:51.185Z,1520541411.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:51.213Z,1520541411.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:51.589Z,1520541411.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:51.622Z,1520541411.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:51.978Z,1520541411.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:51.994Z,1520541411.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:52.369Z,1520541412.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:52.390Z,1520541412.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:52.779Z,1520541412.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:52.794Z,1520541412.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:53.175Z,1520541413.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:53.190Z,1520541413.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:53.577Z,1520541413.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:53.593Z,1520541413.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:53.981Z,1520541413.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:53.997Z,1520541413.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:54.385Z,1520541414.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:54.400Z,1520541414.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:54.782Z,1520541414.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:54.797Z,1520541414.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:55.174Z,1520541415.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:55.201Z,1520541415.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:55.579Z,1520541415.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:55.594Z,1520541415.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:55.978Z,1520541415.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:55.993Z,1520541415.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:56.374Z,1520541416.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:56.389Z,1520541416.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:56.780Z,1520541416.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:56.802Z,1520541416.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:57.180Z,1520541417.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:57.195Z,1520541417.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:57.581Z,1520541417.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:57.597Z,1520541417.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:57.979Z,1520541417.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:57.994Z,1520541417.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:58.378Z,1520541418.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:58.393Z,1520541418.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:58.778Z,1520541418.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:58.793Z,1520541418.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:59.179Z,1520541419.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:59.194Z,1520541419.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:59.579Z,1520541419.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:36:59.595Z,1520541419.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:36:59.979Z,1520541419.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:00.002Z,1520541420.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:00.385Z,1520541420.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:00.400Z,1520541420.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:00.781Z,1520541420.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:00.797Z,1520541420.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:01.178Z,1520541421.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:01.193Z,1520541421.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:01.579Z,1520541421.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:01.594Z,1520541421.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:01.978Z,1520541421.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:01.998Z,1520541421.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:02.379Z,1520541422.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:02.394Z,1520541422.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:02.781Z,1520541422.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:02.796Z,1520541422.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:03.185Z,1520541423.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:03.200Z,1520541423.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:03.581Z,1520541423.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:03.597Z,1520541423.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:03.978Z,1520541423.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:03.993Z,1520541423.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:04.379Z,1520541424.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:04.395Z,1520541424.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:04.778Z,1520541424.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:04.793Z,1520541424.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:05.179Z,1520541425.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:05.194Z,1520541425.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:05.578Z,1520541425.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:05.593Z,1520541425.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:05.979Z,1520541425.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:05.998Z,1520541425.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:06.386Z,1520541426.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:06.400Z,1520541426.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:06.781Z,1520541426.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:06.797Z,1520541426.797 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:06.797Z,1520541426.797 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 257
2018-03-08T20:37:06.797Z,1520541426.797 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T20:37:06.798Z,1520541426.798 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:06.799Z,1520541426.799 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 257
2018-03-08T20:37:06.799Z,1520541426.799 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T20:37:06.800Z,1520541426.800 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:06.801Z,1520541426.801 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 257
2018-03-08T20:37:06.801Z,1520541426.801 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T20:37:06.833Z,1520541426.833 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T20:37:06.833Z,1520541426.833 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T20:37:06.833Z,1520541426.833 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T20:37:07.171Z,1520541427.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:07.213Z,1520541427.213 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T20:37:07.213Z,1520541427.213 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 257
2018-03-08T20:37:07.213Z,1520541427.213 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T20:37:07.214Z,1520541427.214 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 257
2018-03-08T20:37:07.214Z,1520541427.214 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T20:37:07.214Z,1520541427.214 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 257
2018-03-08T20:37:07.574Z,1520541427.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:07.587Z,1520541427.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T20:37:07.588Z,1520541427.588 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:37:07.588Z,1520541427.588 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:37:07.589Z,1520541427.589 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T20:37:07.589Z,1520541427.589 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:37:07.589Z,1520541427.589 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:37:07.590Z,1520541427.590 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T20:37:07.590Z,1520541427.590 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:37:07.590Z,1520541427.590 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:37:07.974Z,1520541427.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:07.992Z,1520541427.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T20:37:07.993Z,1520541427.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:08.378Z,1520541428.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:08.393Z,1520541428.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T20:37:08.394Z,1520541428.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:08.781Z,1520541428.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:08.796Z,1520541428.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T20:37:08.797Z,1520541428.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:09.185Z,1520541429.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:09.200Z,1520541429.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T20:37:09.201Z,1520541429.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:09.581Z,1520541429.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:09.596Z,1520541429.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T20:37:09.597Z,1520541429.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:09.971Z,1520541429.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:09.985Z,1520541429.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T20:37:09.986Z,1520541429.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:10.378Z,1520541430.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:10.393Z,1520541430.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T20:37:10.394Z,1520541430.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:10.778Z,1520541430.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:10.793Z,1520541430.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T20:37:10.794Z,1520541430.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:11.170Z,1520541431.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:11.196Z,1520541431.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T20:37:11.197Z,1520541431.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:11.574Z,1520541431.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:11.589Z,1520541431.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T20:37:11.589Z,1520541431.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:11.980Z,1520541431.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:12.002Z,1520541432.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T20:37:12.003Z,1520541432.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:12.385Z,1520541432.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:12.399Z,1520541432.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T20:37:12.400Z,1520541432.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:12.784Z,1520541432.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:12.798Z,1520541432.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T20:37:12.799Z,1520541432.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:13.178Z,1520541433.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:13.198Z,1520541433.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T20:37:13.199Z,1520541433.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:13.579Z,1520541433.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:13.593Z,1520541433.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T20:37:13.594Z,1520541433.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:13.981Z,1520541433.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:13.995Z,1520541433.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T20:37:13.997Z,1520541433.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:14.372Z,1520541434.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:14.396Z,1520541434.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T20:37:14.397Z,1520541434.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:14.784Z,1520541434.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:14.799Z,1520541434.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T20:37:14.800Z,1520541434.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:15.185Z,1520541435.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:15.200Z,1520541435.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T20:37:15.201Z,1520541435.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:15.583Z,1520541435.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:15.598Z,1520541435.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T20:37:15.599Z,1520541435.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:15.980Z,1520541435.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:15.995Z,1520541435.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T20:37:15.996Z,1520541435.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:16.378Z,1520541436.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:16.398Z,1520541436.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T20:37:16.399Z,1520541436.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:16.778Z,1520541436.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:16.798Z,1520541436.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T20:37:16.799Z,1520541436.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:17.180Z,1520541437.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:17.195Z,1520541437.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T20:37:17.196Z,1520541437.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:17.578Z,1520541437.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:17.598Z,1520541437.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T20:37:17.599Z,1520541437.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:17.984Z,1520541437.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:17.999Z,1520541437.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T20:37:18.001Z,1520541438.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:18.384Z,1520541438.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:18.399Z,1520541438.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T20:37:18.399Z,1520541438.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:18.784Z,1520541438.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:18.799Z,1520541438.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T20:37:18.800Z,1520541438.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:19.178Z,1520541439.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:19.198Z,1520541439.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T20:37:19.199Z,1520541439.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:19.579Z,1520541439.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:19.593Z,1520541439.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T20:37:19.594Z,1520541439.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:19.979Z,1520541439.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:19.994Z,1520541439.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T20:37:19.995Z,1520541439.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:20.372Z,1520541440.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:20.395Z,1520541440.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T20:37:20.396Z,1520541440.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:20.786Z,1520541440.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:20.801Z,1520541440.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T20:37:20.802Z,1520541440.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:21.185Z,1520541441.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:21.200Z,1520541441.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T20:37:21.201Z,1520541441.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:21.584Z,1520541441.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:21.599Z,1520541441.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T20:37:21.600Z,1520541441.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:21.980Z,1520541441.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:21.995Z,1520541441.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T20:37:21.996Z,1520541441.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:22.379Z,1520541442.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:22.394Z,1520541442.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T20:37:22.395Z,1520541442.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:22.778Z,1520541442.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:22.798Z,1520541442.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T20:37:22.799Z,1520541442.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:23.181Z,1520541443.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:23.211Z,1520541443.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T20:37:23.211Z,1520541443.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:23.574Z,1520541443.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:23.589Z,1520541443.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T20:37:23.590Z,1520541443.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:23.985Z,1520541443.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:23.000Z,1520541444.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T20:37:24.001Z,1520541444.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:24.386Z,1520541444.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:24.401Z,1520541444.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T20:37:24.402Z,1520541444.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:27.491Z,1520541447.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:27.507Z,1520541447.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:27.608Z,1520541447.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:27.635Z,1520541447.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:27.989Z,1520541447.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:28.005Z,1520541448.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:28.383Z,1520541448.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:28.399Z,1520541448.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:28.789Z,1520541448.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:28.805Z,1520541448.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:29.192Z,1520541449.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:29.234Z,1520541449.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:29.588Z,1520541449.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:29.605Z,1520541449.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:29.983Z,1520541449.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:30.002Z,1520541450.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:30.387Z,1520541450.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:30.402Z,1520541450.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:30.777Z,1520541450.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:30.800Z,1520541450.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:31.186Z,1520541451.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:31.202Z,1520541451.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:31.581Z,1520541451.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:31.608Z,1520541451.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:31.986Z,1520541451.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:32.007Z,1520541452.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:32.393Z,1520541452.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:32.409Z,1520541452.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:32.788Z,1520541452.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:32.803Z,1520541452.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:33.174Z,1520541453.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:33.195Z,1520541453.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:33.585Z,1520541453.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:33.600Z,1520541453.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:33.987Z,1520541453.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:34.001Z,1520541454.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:34.385Z,1520541454.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:34.402Z,1520541454.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:34.787Z,1520541454.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:34.803Z,1520541454.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:35.197Z,1520541455.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:35.212Z,1520541455.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:35.586Z,1520541455.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:35.607Z,1520541455.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:35.985Z,1520541455.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:36.000Z,1520541456.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:36.381Z,1520541456.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:36.406Z,1520541456.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:36.786Z,1520541456.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:36.802Z,1520541456.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:37.184Z,1520541457.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:37.199Z,1520541457.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:37.587Z,1520541457.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:37.601Z,1520541457.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:37.988Z,1520541457.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:38.004Z,1520541458.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:38.389Z,1520541458.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:38.405Z,1520541458.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:38.788Z,1520541458.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:38.810Z,1520541458.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:39.172Z,1520541459.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:39.207Z,1520541459.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:39.583Z,1520541459.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:39.598Z,1520541459.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:39.988Z,1520541459.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:40.003Z,1520541460.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:40.380Z,1520541460.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:40.395Z,1520541460.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:40.791Z,1520541460.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:40.807Z,1520541460.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:41.193Z,1520541461.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:41.215Z,1520541461.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:41.590Z,1520541461.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:41.610Z,1520541461.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:41.985Z,1520541461.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:42.004Z,1520541462.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:42.374Z,1520541462.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:42.410Z,1520541462.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:42.786Z,1520541462.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:42.809Z,1520541462.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:43.185Z,1520541463.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:43.209Z,1520541463.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:43.602Z,1520541463.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:43.625Z,1520541463.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:43.994Z,1520541463.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:44.010Z,1520541464.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:44.397Z,1520541464.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:44.420Z,1520541464.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:44.819Z,1520541464.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:44.857Z,1520541464.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:45.168Z,1520541465.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:45.215Z,1520541465.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:45.575Z,1520541465.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:45.610Z,1520541465.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:46.002Z,1520541466.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:46.054Z,1520541466.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:46.375Z,1520541466.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:46.410Z,1520541466.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:46.790Z,1520541466.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:46.817Z,1520541466.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:47.189Z,1520541467.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:47.222Z,1520541467.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:47.589Z,1520541467.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:47.616Z,1520541467.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:47.974Z,1520541467.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:48.011Z,1520541468.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:48.378Z,1520541468.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:48.421Z,1520541468.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:48.769Z,1520541468.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:48.786Z,1520541468.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:49.184Z,1520541469.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:49.231Z,1520541469.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:49.578Z,1520541469.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:49.621Z,1520541469.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:49.981Z,1520541469.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:50.009Z,1520541470.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:50.393Z,1520541470.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:50.415Z,1520541470.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:50.793Z,1520541470.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:50.826Z,1520541470.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:51.171Z,1520541471.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:51.195Z,1520541471.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:51.584Z,1520541471.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:51.599Z,1520541471.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:51.991Z,1520541471.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:52.027Z,1520541472.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:52.384Z,1520541472.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:52.423Z,1520541472.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:52.801Z,1520541472.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:52.826Z,1520541472.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:53.193Z,1520541473.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:53.220Z,1520541473.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:53.586Z,1520541473.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:53.601Z,1520541473.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:53.980Z,1520541473.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:54.002Z,1520541474.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:54.384Z,1520541474.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:54.440Z,1520541474.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:54.776Z,1520541474.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:54.791Z,1520541474.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:55.184Z,1520541475.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:55.199Z,1520541475.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:55.592Z,1520541475.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:55.607Z,1520541475.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:55.990Z,1520541475.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:56.005Z,1520541476.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:56.389Z,1520541476.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:56.410Z,1520541476.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:56.790Z,1520541476.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:56.805Z,1520541476.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:57.186Z,1520541477.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:57.201Z,1520541477.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:57.592Z,1520541477.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:57.607Z,1520541477.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:57.984Z,1520541477.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:57.999Z,1520541477.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:58.382Z,1520541478.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:58.401Z,1520541478.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:58.796Z,1520541478.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:58.811Z,1520541478.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:59.197Z,1520541479.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:59.218Z,1520541479.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:59.597Z,1520541479.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:37:59.618Z,1520541479.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:37:59.986Z,1520541479.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:00.006Z,1520541480.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:00.383Z,1520541480.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:00.400Z,1520541480.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:00.781Z,1520541480.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:00.803Z,1520541480.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:01.184Z,1520541481.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:01.199Z,1520541481.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:01.591Z,1520541481.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:01.607Z,1520541481.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:01.988Z,1520541481.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:02.011Z,1520541482.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:02.392Z,1520541482.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:02.411Z,1520541482.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:02.797Z,1520541482.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:02.818Z,1520541482.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:03.190Z,1520541483.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:03.210Z,1520541483.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:03.588Z,1520541483.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:03.603Z,1520541483.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:03.981Z,1520541483.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:04.002Z,1520541484.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:04.385Z,1520541484.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:04.408Z,1520541484.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:04.798Z,1520541484.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:04.814Z,1520541484.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:05.200Z,1520541485.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:05.215Z,1520541485.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:05.597Z,1520541485.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:05.618Z,1520541485.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:05.987Z,1520541485.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:06.003Z,1520541486.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:06.375Z,1520541486.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:06.412Z,1520541486.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:06.787Z,1520541486.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:06.807Z,1520541486.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:07.175Z,1520541487.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:07.207Z,1520541487.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:07.578Z,1520541487.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:07.610Z,1520541487.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:07.998Z,1520541487.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:08.013Z,1520541488.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:08.392Z,1520541488.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:08.408Z,1520541488.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:08.790Z,1520541488.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:08.821Z,1520541488.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:09.178Z,1520541489.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:09.206Z,1520541489.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:09.570Z,1520541489.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:09.601Z,1520541489.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:09.980Z,1520541489.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:10.007Z,1520541490.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:10.370Z,1520541490.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:10.407Z,1520541490.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:10.793Z,1520541490.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:10.811Z,1520541490.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:11.195Z,1520541491.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:11.215Z,1520541491.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:11.597Z,1520541491.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:11.612Z,1520541491.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:11.970Z,1520541491.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:11.998Z,1520541491.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:12.378Z,1520541492.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:12.410Z,1520541492.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:12.771Z,1520541492.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:12.787Z,1520541492.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:13.179Z,1520541493.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:13.210Z,1520541493.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:13.578Z,1520541493.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:13.619Z,1520541493.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:14.010Z,1520541494.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:14.031Z,1520541494.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:14.389Z,1520541494.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:14.404Z,1520541494.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:14.801Z,1520541494.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:14.826Z,1520541494.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:15.177Z,1520541495.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:15.237Z,1520541495.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:15.584Z,1520541495.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:15.600Z,1520541495.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:15.988Z,1520541495.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:16.011Z,1520541496.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:16.381Z,1520541496.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:16.413Z,1520541496.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:16.806Z,1520541496.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:16.822Z,1520541496.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:17.200Z,1520541497.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:17.226Z,1520541497.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:17.597Z,1520541497.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:17.613Z,1520541497.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:17.970Z,1520541497.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:18.001Z,1520541498.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:18.374Z,1520541498.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:18.411Z,1520541498.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:18.778Z,1520541498.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:18.811Z,1520541498.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:19.175Z,1520541499.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:19.202Z,1520541499.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:19.579Z,1520541499.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:19.610Z,1520541499.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:19.989Z,1520541499.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:20.016Z,1520541500.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:20.389Z,1520541500.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:20.416Z,1520541500.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:20.793Z,1520541500.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:20.820Z,1520541500.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:21.174Z,1520541501.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:21.194Z,1520541501.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:21.575Z,1520541501.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:21.591Z,1520541501.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:21.983Z,1520541501.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:21.999Z,1520541501.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:22.382Z,1520541502.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:22.402Z,1520541502.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:22.793Z,1520541502.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:22.828Z,1520541502.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:23.199Z,1520541503.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:23.225Z,1520541503.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:23.597Z,1520541503.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:23.627Z,1520541503.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:23.981Z,1520541503.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:23.996Z,1520541503.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:24.384Z,1520541504.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:24.399Z,1520541504.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:27.518Z,1520541507.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:27.552Z,1520541507.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:27.679Z,1520541507.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:27.730Z,1520541507.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:28.039Z,1520541508.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:28.094Z,1520541508.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:28.453Z,1520541508.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:28.468Z,1520541508.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:28.841Z,1520541508.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:28.856Z,1520541508.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:29.219Z,1520541509.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:29.251Z,1520541509.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:29.631Z,1520541509.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:29.646Z,1520541509.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:30.019Z,1520541510.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:30.054Z,1520541510.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:30.423Z,1520541510.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:30.451Z,1520541510.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:30.833Z,1520541510.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:30.849Z,1520541510.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:31.257Z,1520541511.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:31.273Z,1520541511.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:31.647Z,1520541511.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:31.663Z,1520541511.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:32.024Z,1520541512.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:32.052Z,1520541512.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:32.422Z,1520541512.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:32.459Z,1520541512.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:32.823Z,1520541512.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:32.843Z,1520541512.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:33.226Z,1520541513.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:33.246Z,1520541513.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:33.625Z,1520541513.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:33.640Z,1520541513.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:34.041Z,1520541514.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:34.066Z,1520541514.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:34.433Z,1520541514.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:34.467Z,1520541514.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:34.837Z,1520541514.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:34.869Z,1520541514.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:35.227Z,1520541515.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:35.246Z,1520541515.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:35.628Z,1520541515.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:35.644Z,1520541515.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:36.026Z,1520541516.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:36.043Z,1520541516.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:36.428Z,1520541516.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:36.443Z,1520541516.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:36.829Z,1520541516.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:36.846Z,1520541516.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:37.238Z,1520541517.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:37.258Z,1520541517.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:37.638Z,1520541517.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:37.653Z,1520541517.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:38.018Z,1520541518.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:38.052Z,1520541518.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:38.414Z,1520541518.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:38.450Z,1520541518.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:38.840Z,1520541518.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:38.863Z,1520541518.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:39.222Z,1520541519.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:39.250Z,1520541519.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:39.645Z,1520541519.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:39.706Z,1520541519.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:40.050Z,1520541520.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:40.065Z,1520541520.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:40.441Z,1520541520.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:40.456Z,1520541520.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:40.814Z,1520541520.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:40.850Z,1520541520.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:41.219Z,1520541521.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:41.254Z,1520541521.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:41.618Z,1520541521.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:41.651Z,1520541521.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:42.033Z,1520541522.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:42.065Z,1520541522.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:42.445Z,1520541522.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:42.461Z,1520541522.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:42.840Z,1520541522.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:42.855Z,1520541522.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:43.218Z,1520541523.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:43.250Z,1520541523.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:43.623Z,1520541523.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:43.655Z,1520541523.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:44.023Z,1520541524.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:44.053Z,1520541524.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:44.418Z,1520541524.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:44.446Z,1520541524.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:44.833Z,1520541524.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:44.866Z,1520541524.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:45.233Z,1520541525.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:45.260Z,1520541525.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:45.629Z,1520541525.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:45.655Z,1520541525.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:46.027Z,1520541526.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:46.061Z,1520541526.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:46.419Z,1520541526.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:46.434Z,1520541526.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:46.823Z,1520541526.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:46.839Z,1520541526.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:47.228Z,1520541527.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:47.243Z,1520541527.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:47.627Z,1520541527.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:47.643Z,1520541527.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:48.026Z,1520541528.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:48.041Z,1520541528.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:48.441Z,1520541528.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:48.464Z,1520541528.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:48.826Z,1520541528.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:48.846Z,1520541528.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:49.223Z,1520541529.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:49.239Z,1520541529.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:49.628Z,1520541529.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:49.644Z,1520541529.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:50.019Z,1520541530.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:50.047Z,1520541530.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:50.429Z,1520541530.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:50.444Z,1520541530.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:50.832Z,1520541530.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:50.855Z,1520541530.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:51.237Z,1520541531.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:51.253Z,1520541531.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:51.633Z,1520541531.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:51.648Z,1520541531.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:52.031Z,1520541532.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:52.046Z,1520541532.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:52.430Z,1520541532.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:52.446Z,1520541532.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:52.818Z,1520541532.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:52.841Z,1520541532.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:53.232Z,1520541533.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:53.248Z,1520541533.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:53.627Z,1520541533.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:53.643Z,1520541533.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:54.032Z,1520541534.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:54.048Z,1520541534.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:54.437Z,1520541534.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:54.452Z,1520541534.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:54.836Z,1520541534.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:54.859Z,1520541534.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:55.216Z,1520541535.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:55.242Z,1520541535.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:55.631Z,1520541535.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:55.647Z,1520541535.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:56.032Z,1520541536.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:56.047Z,1520541536.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:56.430Z,1520541536.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:56.445Z,1520541536.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:56.836Z,1520541536.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:56.858Z,1520541536.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:57.239Z,1520541537.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:57.255Z,1520541537.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:57.640Z,1520541537.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:57.655Z,1520541537.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:58.031Z,1520541538.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:58.050Z,1520541538.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:58.431Z,1520541538.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:58.447Z,1520541538.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:58.830Z,1520541538.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:58.850Z,1520541538.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:59.233Z,1520541539.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:59.248Z,1520541539.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:38:59.614Z,1520541539.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:38:59.647Z,1520541539.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:00.033Z,1520541540.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:00.048Z,1520541540.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:00.441Z,1520541540.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:00.456Z,1520541540.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:00.840Z,1520541540.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:00.855Z,1520541540.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:01.230Z,1520541541.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:01.246Z,1520541541.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:01.627Z,1520541541.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:01.642Z,1520541541.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:02.031Z,1520541542.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:02.047Z,1520541542.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:02.426Z,1520541542.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:02.441Z,1520541542.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:02.836Z,1520541542.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:02.860Z,1520541542.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:03.241Z,1520541543.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:03.256Z,1520541543.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:03.631Z,1520541543.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:03.651Z,1520541543.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:04.018Z,1520541544.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:04.051Z,1520541544.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:04.414Z,1520541544.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:04.447Z,1520541544.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:04.814Z,1520541544.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:04.846Z,1520541544.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:05.220Z,1520541545.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:05.248Z,1520541545.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:05.614Z,1520541545.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:05.647Z,1520541545.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:06.037Z,1520541546.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:06.052Z,1520541546.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:06.440Z,1520541546.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:06.456Z,1520541546.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:06.840Z,1520541546.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:06.856Z,1520541546.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:07.214Z,1520541547.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:07.251Z,1520541547.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:07.622Z,1520541547.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:07.649Z,1520541547.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:08.023Z,1520541548.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:08.051Z,1520541548.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:08.414Z,1520541548.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:08.446Z,1520541548.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:08.842Z,1520541548.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:08.857Z,1520541548.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:09.237Z,1520541549.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:09.256Z,1520541549.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:09.625Z,1520541549.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:09.658Z,1520541549.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:10.019Z,1520541550.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:10.051Z,1520541550.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:10.414Z,1520541550.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:10.455Z,1520541550.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:10.822Z,1520541550.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:10.855Z,1520541550.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:11.227Z,1520541551.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:11.255Z,1520541551.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:11.618Z,1520541551.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:11.655Z,1520541551.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:12.043Z,1520541552.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:12.059Z,1520541552.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:12.441Z,1520541552.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:12.460Z,1520541552.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:12.829Z,1520541552.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:12.867Z,1520541552.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:13.221Z,1520541553.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:13.236Z,1520541553.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:13.623Z,1520541553.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:13.639Z,1520541553.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:14.028Z,1520541554.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:14.043Z,1520541554.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:14.427Z,1520541554.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:14.442Z,1520541554.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:14.842Z,1520541554.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:14.866Z,1520541554.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:15.238Z,1520541555.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:15.269Z,1520541555.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:15.638Z,1520541555.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:15.669Z,1520541555.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:16.027Z,1520541556.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:16.043Z,1520541556.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:16.424Z,1520541556.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:16.447Z,1520541556.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:16.828Z,1520541556.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:16.844Z,1520541556.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:17.223Z,1520541557.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:17.249Z,1520541557.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:17.624Z,1520541557.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:17.647Z,1520541557.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:18.041Z,1520541558.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:18.073Z,1520541558.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:18.433Z,1520541558.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:18.447Z,1520541558.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:18.833Z,1520541558.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:18.850Z,1520541558.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:19.222Z,1520541559.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:19.237Z,1520541559.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:19.628Z,1520541559.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:19.650Z,1520541559.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:20.025Z,1520541560.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:20.040Z,1520541560.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:20.422Z,1520541560.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:20.437Z,1520541560.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:20.832Z,1520541560.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:20.847Z,1520541560.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:21.237Z,1520541561.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:21.253Z,1520541561.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:21.634Z,1520541561.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:21.649Z,1520541561.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:22.030Z,1520541562.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:22.045Z,1520541562.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:22.430Z,1520541562.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:22.450Z,1520541562.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:22.830Z,1520541562.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:22.845Z,1520541562.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:23.224Z,1520541563.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:23.239Z,1520541563.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:23.242Z,1520541563.242 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T20:34:23.1Z
2018-03-08T20:39:23.242Z,1520541563.242 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T20:39:23.242Z,1520541563.242 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T20:39:23.617Z,1520541563.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:23.650Z,1520541563.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:24.125Z,1520541564.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:24.143Z,1520541564.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:24.437Z,1520541564.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:24.453Z,1520541564.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:27.561Z,1520541567.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:27.585Z,1520541567.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:27.671Z,1520541567.671 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0300.lzma
2018-03-08T20:39:27.691Z,1520541567.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:27.738Z,1520541567.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:28.037Z,1520541568.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:28.053Z,1520541568.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:28.411Z,1520541568.411 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0300.lzma.bak
2018-03-08T20:39:28.412Z,1520541568.412 [DataOverHttps](INFO): SBD MOMSN=7988936
2018-03-08T20:39:28.451Z,1520541568.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:28.474Z,1520541568.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:29.028Z,1520541569.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:29.043Z,1520541569.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:29.241Z,1520541569.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:29.256Z,1520541569.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:32.526Z,1520541572.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:32.542Z,1520541572.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:32.653Z,1520541572.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:32.695Z,1520541572.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:33.013Z,1520541573.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:33.042Z,1520541573.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:33.397Z,1520541573.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:33.441Z,1520541573.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:33.793Z,1520541573.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:33.815Z,1520541573.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:34.207Z,1520541574.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:34.238Z,1520541574.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:34.597Z,1520541574.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:34.612Z,1520541574.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:37.701Z,1520541577.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:37.719Z,1520541577.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:37.839Z,1520541577.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:37.870Z,1520541577.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:38.185Z,1520541578.185 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180308T074127/Express0301.lzma
2018-03-08T20:39:38.221Z,1520541578.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:38.252Z,1520541578.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:38.604Z,1520541578.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:38.619Z,1520541578.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:38.979Z,1520541578.979 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0301.lzma.bak
2018-03-08T20:39:38.980Z,1520541578.980 [DataOverHttps](INFO): SBD MOMSN=7988938
2018-03-08T20:39:39.017Z,1520541579.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:39.045Z,1520541579.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:39.595Z,1520541579.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:39.610Z,1520541579.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:39.613Z,1520541579.613 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T20:39:39.613Z,1520541579.613 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T20:39:39.613Z,1520541579.613 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T20:39:39.812Z,1520541579.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:39.853Z,1520541579.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:43.576Z,1520541583.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:43.627Z,1520541583.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:43.723Z,1520541583.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:43.749Z,1520541583.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:44.116Z,1520541584.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:44.156Z,1520541584.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:44.519Z,1520541584.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:44.539Z,1520541584.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:44.924Z,1520541584.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:44.940Z,1520541584.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:45.331Z,1520541585.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:45.364Z,1520541585.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:45.720Z,1520541585.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:45.736Z,1520541585.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:46.118Z,1520541586.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:46.143Z,1520541586.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:46.519Z,1520541586.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:46.544Z,1520541586.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:46.915Z,1520541586.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:46.930Z,1520541586.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:47.312Z,1520541587.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:47.331Z,1520541587.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:47.714Z,1520541587.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:47.729Z,1520541587.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:48.117Z,1520541588.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:48.132Z,1520541588.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:48.511Z,1520541588.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:48.526Z,1520541588.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:48.920Z,1520541588.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:48.935Z,1520541588.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:49.325Z,1520541589.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:49.340Z,1520541589.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:49.719Z,1520541589.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:49.735Z,1520541589.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:50.114Z,1520541590.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:50.130Z,1520541590.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:50.518Z,1520541590.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:50.534Z,1520541590.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:50.922Z,1520541590.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:50.992Z,1520541590.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:51.308Z,1520541591.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:51.323Z,1520541591.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:51.721Z,1520541591.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:51.737Z,1520541591.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:52.121Z,1520541592.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:52.137Z,1520541592.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:52.521Z,1520541592.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:52.537Z,1520541592.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:52.911Z,1520541592.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:52.926Z,1520541592.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:53.300Z,1520541593.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:53.315Z,1520541593.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:53.706Z,1520541593.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:53.726Z,1520541593.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:54.109Z,1520541594.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:54.124Z,1520541594.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:54.511Z,1520541594.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:54.539Z,1520541594.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:54.918Z,1520541594.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:54.939Z,1520541594.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:55.325Z,1520541595.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:55.350Z,1520541595.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:55.721Z,1520541595.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:55.753Z,1520541595.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:56.111Z,1520541596.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:56.127Z,1520541596.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:56.514Z,1520541596.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:56.529Z,1520541596.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:56.917Z,1520541596.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:56.934Z,1520541596.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:57.311Z,1520541597.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:57.331Z,1520541597.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:57.729Z,1520541597.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:57.761Z,1520541597.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:58.117Z,1520541598.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:58.133Z,1520541598.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:58.521Z,1520541598.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:58.537Z,1520541598.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:58.916Z,1520541598.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:58.931Z,1520541598.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:59.303Z,1520541599.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:59.335Z,1520541599.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:39:59.719Z,1520541599.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:39:59.735Z,1520541599.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:00.122Z,1520541600.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:00.183Z,1520541600.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:00.504Z,1520541600.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:00.536Z,1520541600.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:00.925Z,1520541600.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:00.941Z,1520541600.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:01.324Z,1520541601.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:01.340Z,1520541601.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:01.723Z,1520541601.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:01.741Z,1520541601.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:02.118Z,1520541602.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:02.139Z,1520541602.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:02.520Z,1520541602.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:02.535Z,1520541602.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:02.919Z,1520541602.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:02.935Z,1520541602.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:03.318Z,1520541603.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:03.334Z,1520541603.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:03.724Z,1520541603.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:03.740Z,1520541603.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:04.119Z,1520541604.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:04.151Z,1520541604.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:04.529Z,1520541604.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:04.550Z,1520541604.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:04.918Z,1520541604.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:04.934Z,1520541604.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:05.304Z,1520541605.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:05.336Z,1520541605.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:05.719Z,1520541605.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:05.739Z,1520541605.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:06.118Z,1520541606.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:06.134Z,1520541606.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:06.504Z,1520541606.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:06.528Z,1520541606.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:06.929Z,1520541606.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:06.950Z,1520541606.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:07.334Z,1520541607.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:07.349Z,1520541607.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:07.729Z,1520541607.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:07.751Z,1520541607.751 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:07.751Z,1520541607.751 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 258
2018-03-08T20:40:07.751Z,1520541607.751 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T20:40:07.753Z,1520541607.753 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:07.753Z,1520541607.753 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 258
2018-03-08T20:40:07.753Z,1520541607.753 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T20:40:07.755Z,1520541607.755 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:07.755Z,1520541607.755 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 258
2018-03-08T20:40:07.755Z,1520541607.755 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T20:40:07.808Z,1520541607.808 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T20:40:07.808Z,1520541607.808 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T20:40:07.808Z,1520541607.808 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T20:40:08.105Z,1520541608.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:08.161Z,1520541608.161 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T20:40:08.161Z,1520541608.161 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 258
2018-03-08T20:40:08.161Z,1520541608.161 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T20:40:08.162Z,1520541608.162 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 258
2018-03-08T20:40:08.162Z,1520541608.162 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T20:40:08.162Z,1520541608.162 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 258
2018-03-08T20:40:08.510Z,1520541608.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:08.543Z,1520541608.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T20:40:08.543Z,1520541608.543 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:40:08.543Z,1520541608.543 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:40:08.544Z,1520541608.544 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T20:40:08.544Z,1520541608.544 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:40:08.545Z,1520541608.545 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:40:08.546Z,1520541608.546 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T20:40:08.546Z,1520541608.546 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:40:08.546Z,1520541608.546 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:40:08.907Z,1520541608.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:08.938Z,1520541608.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T20:40:08.939Z,1520541608.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:09.311Z,1520541609.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:09.342Z,1520541609.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T20:40:09.343Z,1520541609.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:09.721Z,1520541609.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:09.750Z,1520541609.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T20:40:09.751Z,1520541609.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:10.117Z,1520541610.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:10.148Z,1520541610.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T20:40:10.153Z,1520541610.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:10.525Z,1520541610.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:10.549Z,1520541610.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T20:40:10.550Z,1520541610.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:10.911Z,1520541610.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:10.926Z,1520541610.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T20:40:10.927Z,1520541610.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:11.306Z,1520541611.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:11.323Z,1520541611.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T20:40:11.324Z,1520541611.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:11.710Z,1520541611.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:11.730Z,1520541611.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T20:40:11.731Z,1520541611.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:12.115Z,1520541612.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:12.129Z,1520541612.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T20:40:12.130Z,1520541612.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:12.507Z,1520541612.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:12.522Z,1520541612.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T20:40:12.523Z,1520541612.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:12.925Z,1520541612.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:12.956Z,1520541612.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T20:40:12.957Z,1520541612.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:13.325Z,1520541613.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:13.357Z,1520541613.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T20:40:13.358Z,1520541613.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:13.725Z,1520541613.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:13.756Z,1520541613.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T20:40:13.757Z,1520541613.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:14.114Z,1520541614.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:14.135Z,1520541614.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T20:40:14.135Z,1520541614.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:14.512Z,1520541614.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:14.527Z,1520541614.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T20:40:14.527Z,1520541614.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:14.918Z,1520541614.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:14.933Z,1520541614.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T20:40:14.934Z,1520541614.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:15.316Z,1520541615.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:15.331Z,1520541615.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T20:40:15.332Z,1520541615.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:15.718Z,1520541615.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:15.733Z,1520541615.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T20:40:15.734Z,1520541615.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:16.118Z,1520541616.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:16.139Z,1520541616.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T20:40:16.139Z,1520541616.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:16.530Z,1520541616.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:16.563Z,1520541616.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T20:40:16.563Z,1520541616.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:16.915Z,1520541616.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:16.930Z,1520541616.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T20:40:16.931Z,1520541616.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:17.309Z,1520541617.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:17.329Z,1520541617.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T20:40:17.330Z,1520541617.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:17.712Z,1520541617.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:17.739Z,1520541617.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T20:40:17.740Z,1520541617.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:18.115Z,1520541618.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:18.131Z,1520541618.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T20:40:18.132Z,1520541618.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:18.509Z,1520541618.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:18.529Z,1520541618.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T20:40:18.530Z,1520541618.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:18.924Z,1520541618.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:18.943Z,1520541618.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T20:40:18.943Z,1520541618.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:19.325Z,1520541619.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:19.346Z,1520541619.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T20:40:19.347Z,1520541619.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:19.720Z,1520541619.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:19.736Z,1520541619.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T20:40:19.737Z,1520541619.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:20.114Z,1520541620.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:20.135Z,1520541620.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T20:40:20.135Z,1520541620.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:20.515Z,1520541620.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:20.534Z,1520541620.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T20:40:20.535Z,1520541620.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:20.920Z,1520541620.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:20.936Z,1520541620.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T20:40:20.937Z,1520541620.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:21.318Z,1520541621.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:21.333Z,1520541621.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T20:40:21.334Z,1520541621.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:21.725Z,1520541621.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:21.740Z,1520541621.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T20:40:21.741Z,1520541621.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:22.122Z,1520541622.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:22.141Z,1520541622.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T20:40:22.142Z,1520541622.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:22.523Z,1520541622.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:22.539Z,1520541622.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T20:40:22.540Z,1520541622.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:22.915Z,1520541622.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:22.931Z,1520541622.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T20:40:22.932Z,1520541622.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:23.311Z,1520541623.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:23.330Z,1520541623.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T20:40:23.330Z,1520541623.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:23.718Z,1520541623.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:23.739Z,1520541623.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T20:40:23.739Z,1520541623.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:24.120Z,1520541624.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:24.135Z,1520541624.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T20:40:24.137Z,1520541624.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:24.508Z,1520541624.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:24.536Z,1520541624.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T20:40:24.541Z,1520541624.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:24.928Z,1520541624.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:24.951Z,1520541624.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T20:40:24.952Z,1520541624.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:25.329Z,1520541625.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:25.350Z,1520541625.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T20:40:25.351Z,1520541625.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:25.729Z,1520541625.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:25.750Z,1520541625.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T20:40:25.751Z,1520541625.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:26.108Z,1520541626.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:26.134Z,1520541626.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T20:40:26.135Z,1520541626.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:26.506Z,1520541626.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:26.544Z,1520541626.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T20:40:26.545Z,1520541626.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:26.907Z,1520541626.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:26.933Z,1520541626.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T20:40:26.934Z,1520541626.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:27.306Z,1520541627.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:27.338Z,1520541627.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T20:40:27.339Z,1520541627.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:27.728Z,1520541627.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:27.823Z,1520541627.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:28.120Z,1520541628.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:28.136Z,1520541628.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:28.525Z,1520541628.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:28.541Z,1520541628.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:28.906Z,1520541628.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:28.935Z,1520541628.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:29.306Z,1520541629.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:29.339Z,1520541629.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:29.707Z,1520541629.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:29.773Z,1520541629.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:30.107Z,1520541630.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:30.136Z,1520541630.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:30.511Z,1520541630.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:30.538Z,1520541630.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:30.926Z,1520541630.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:30.946Z,1520541630.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:31.334Z,1520541631.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:31.349Z,1520541631.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:31.729Z,1520541631.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:31.748Z,1520541631.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:32.106Z,1520541632.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:32.132Z,1520541632.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:32.506Z,1520541632.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:32.545Z,1520541632.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:32.911Z,1520541632.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:32.938Z,1520541632.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:33.306Z,1520541633.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:33.332Z,1520541633.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:33.726Z,1520541633.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:33.742Z,1520541633.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:34.132Z,1520541634.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:34.148Z,1520541634.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:34.531Z,1520541634.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:34.554Z,1520541634.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:34.910Z,1520541634.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:34.946Z,1520541634.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:35.310Z,1520541635.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:35.338Z,1520541635.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:35.706Z,1520541635.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:35.744Z,1520541635.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:36.120Z,1520541636.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:36.136Z,1520541636.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:36.507Z,1520541636.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:36.539Z,1520541636.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:36.933Z,1520541636.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:36.949Z,1520541636.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:37.329Z,1520541637.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:37.346Z,1520541637.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:37.721Z,1520541637.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:37.749Z,1520541637.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:38.111Z,1520541638.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:38.138Z,1520541638.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:38.506Z,1520541638.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:38.547Z,1520541638.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:38.911Z,1520541638.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:38.939Z,1520541638.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:39.306Z,1520541639.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:39.339Z,1520541639.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:39.732Z,1520541639.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:39.748Z,1520541639.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:40.131Z,1520541640.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:40.154Z,1520541640.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:43.230Z,1520541643.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:43.246Z,1520541643.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:43.341Z,1520541643.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:43.382Z,1520541643.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:43.698Z,1520541643.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:43.718Z,1520541643.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:44.096Z,1520541644.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:44.112Z,1520541644.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:44.502Z,1520541644.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:44.519Z,1520541644.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:44.913Z,1520541644.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:44.945Z,1520541644.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:45.305Z,1520541645.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:45.320Z,1520541645.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:45.713Z,1520541645.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:45.744Z,1520541645.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:46.099Z,1520541646.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:46.115Z,1520541646.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:46.498Z,1520541646.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:46.513Z,1520541646.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:46.894Z,1520541646.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:46.914Z,1520541646.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:47.302Z,1520541647.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:47.317Z,1520541647.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:47.705Z,1520541647.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:47.720Z,1520541647.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:48.102Z,1520541648.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:48.122Z,1520541648.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:48.505Z,1520541648.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:48.521Z,1520541648.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:48.895Z,1520541648.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:48.910Z,1520541648.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:49.292Z,1520541649.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:49.315Z,1520541649.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:49.703Z,1520541649.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:49.718Z,1520541649.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:50.093Z,1520541650.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:50.121Z,1520541650.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:50.503Z,1520541650.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:50.518Z,1520541650.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:50.904Z,1520541650.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:50.926Z,1520541650.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:51.308Z,1520541651.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:51.323Z,1520541651.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:51.706Z,1520541651.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:51.726Z,1520541651.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:52.099Z,1520541652.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:52.114Z,1520541652.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:52.496Z,1520541652.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:52.511Z,1520541652.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:52.894Z,1520541652.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:52.914Z,1520541652.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:53.298Z,1520541653.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:53.317Z,1520541653.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:53.704Z,1520541653.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:53.720Z,1520541653.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:54.102Z,1520541654.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:54.131Z,1520541654.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:54.506Z,1520541654.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:54.523Z,1520541654.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:54.893Z,1520541654.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:54.915Z,1520541654.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:55.296Z,1520541655.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:55.312Z,1520541655.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:55.694Z,1520541655.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:55.716Z,1520541655.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:56.095Z,1520541656.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:56.110Z,1520541656.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:56.504Z,1520541656.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:56.519Z,1520541656.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:56.908Z,1520541656.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:56.923Z,1520541656.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:57.309Z,1520541657.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:57.324Z,1520541657.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:57.708Z,1520541657.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:57.723Z,1520541657.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:58.102Z,1520541658.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:58.122Z,1520541658.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:58.504Z,1520541658.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:58.519Z,1520541658.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:58.894Z,1520541658.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:58.913Z,1520541658.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:59.293Z,1520541659.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:59.316Z,1520541659.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:40:59.708Z,1520541659.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:40:59.723Z,1520541659.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:00.108Z,1520541660.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:00.123Z,1520541660.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:00.507Z,1520541660.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:00.523Z,1520541660.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:00.903Z,1520541660.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:00.919Z,1520541660.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:01.295Z,1520541661.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:01.325Z,1520541661.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:01.702Z,1520541661.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:01.722Z,1520541661.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:02.104Z,1520541662.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:02.119Z,1520541662.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:02.502Z,1520541662.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:02.522Z,1520541662.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:02.908Z,1520541662.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:02.923Z,1520541662.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:03.310Z,1520541663.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:03.325Z,1520541663.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:03.708Z,1520541663.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:03.730Z,1520541663.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:04.102Z,1520541664.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:04.123Z,1520541664.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:04.503Z,1520541664.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:04.518Z,1520541664.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:04.903Z,1520541664.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:04.918Z,1520541664.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:05.301Z,1520541665.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:05.319Z,1520541665.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:05.708Z,1520541665.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:05.723Z,1520541665.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:06.104Z,1520541666.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:06.120Z,1520541666.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:06.508Z,1520541666.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:06.530Z,1520541666.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:06.903Z,1520541666.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:06.918Z,1520541666.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:07.296Z,1520541667.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:07.311Z,1520541667.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:07.696Z,1520541667.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:07.719Z,1520541667.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:08.101Z,1520541668.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:08.116Z,1520541668.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:08.502Z,1520541668.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:08.522Z,1520541668.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:08.908Z,1520541668.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:08.923Z,1520541668.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:09.308Z,1520541669.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:09.323Z,1520541669.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:09.708Z,1520541669.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:09.723Z,1520541669.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:10.096Z,1520541670.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:10.121Z,1520541670.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:10.503Z,1520541670.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:10.518Z,1520541670.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:10.904Z,1520541670.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:10.919Z,1520541670.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:11.296Z,1520541671.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:11.323Z,1520541671.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:11.708Z,1520541671.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:11.723Z,1520541671.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:12.110Z,1520541672.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:12.125Z,1520541672.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:12.508Z,1520541672.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:12.530Z,1520541672.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:12.905Z,1520541672.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:12.920Z,1520541672.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:13.296Z,1520541673.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:13.320Z,1520541673.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:13.703Z,1520541673.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:13.718Z,1520541673.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:14.100Z,1520541674.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:14.115Z,1520541674.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:14.505Z,1520541674.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:14.520Z,1520541674.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:14.910Z,1520541674.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:14.930Z,1520541674.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:15.313Z,1520541675.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:15.327Z,1520541675.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:15.714Z,1520541675.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:15.735Z,1520541675.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:16.103Z,1520541676.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:16.122Z,1520541676.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:16.485Z,1520541676.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:16.521Z,1520541676.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:16.903Z,1520541676.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:16.919Z,1520541676.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:17.293Z,1520541677.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:17.317Z,1520541677.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:17.710Z,1520541677.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:17.726Z,1520541677.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:18.111Z,1520541678.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:18.127Z,1520541678.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:18.512Z,1520541678.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:18.528Z,1520541678.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:18.886Z,1520541678.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:18.919Z,1520541678.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:19.284Z,1520541679.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:19.312Z,1520541679.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:19.694Z,1520541679.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:19.721Z,1520541679.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:20.091Z,1520541680.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:20.118Z,1520541680.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:20.491Z,1520541680.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:20.523Z,1520541680.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:20.913Z,1520541680.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:20.928Z,1520541680.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:21.312Z,1520541681.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:21.337Z,1520541681.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:21.713Z,1520541681.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:21.728Z,1520541681.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:22.090Z,1520541682.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:22.122Z,1520541682.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:22.491Z,1520541682.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:22.523Z,1520541682.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:22.895Z,1520541682.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:22.921Z,1520541682.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:23.290Z,1520541683.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:23.322Z,1520541683.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:23.697Z,1520541683.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:23.720Z,1520541683.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:24.101Z,1520541684.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:24.127Z,1520541684.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:24.501Z,1520541684.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:24.535Z,1520541684.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:24.890Z,1520541684.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:24.934Z,1520541684.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:25.285Z,1520541685.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:25.301Z,1520541685.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:25.702Z,1520541685.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:25.731Z,1520541685.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:26.097Z,1520541686.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:26.124Z,1520541686.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:26.498Z,1520541686.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:26.535Z,1520541686.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:26.905Z,1520541686.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:26.936Z,1520541686.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:27.309Z,1520541687.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:27.333Z,1520541687.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:27.709Z,1520541687.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:27.734Z,1520541687.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:28.096Z,1520541688.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:28.115Z,1520541688.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:28.498Z,1520541688.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:28.513Z,1520541688.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:28.892Z,1520541688.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:28.907Z,1520541688.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:29.299Z,1520541689.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:29.315Z,1520541689.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:29.713Z,1520541689.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:29.745Z,1520541689.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:30.097Z,1520541690.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:30.113Z,1520541690.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:30.505Z,1520541690.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:30.542Z,1520541690.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:30.899Z,1520541690.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:30.915Z,1520541690.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:31.295Z,1520541691.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:31.315Z,1520541691.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:31.699Z,1520541691.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:31.715Z,1520541691.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:32.101Z,1520541692.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:32.116Z,1520541692.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:32.495Z,1520541692.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:32.511Z,1520541692.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:32.914Z,1520541692.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:32.949Z,1520541692.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:33.309Z,1520541693.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:33.324Z,1520541693.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:33.703Z,1520541693.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:33.719Z,1520541693.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:34.103Z,1520541694.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:34.119Z,1520541694.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:34.503Z,1520541694.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:34.518Z,1520541694.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:34.891Z,1520541694.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:34.914Z,1520541694.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:35.301Z,1520541695.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:35.317Z,1520541695.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:35.705Z,1520541695.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:35.721Z,1520541695.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:36.103Z,1520541696.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:36.119Z,1520541696.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:36.503Z,1520541696.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:36.519Z,1520541696.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:36.902Z,1520541696.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:36.923Z,1520541696.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:37.288Z,1520541697.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:37.315Z,1520541697.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:37.702Z,1520541697.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:37.722Z,1520541697.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:38.104Z,1520541698.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:38.120Z,1520541698.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:38.502Z,1520541698.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:38.517Z,1520541698.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:38.910Z,1520541698.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:38.925Z,1520541698.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:39.313Z,1520541699.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:39.328Z,1520541699.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:39.709Z,1520541699.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:39.724Z,1520541699.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:40.102Z,1520541700.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:40.122Z,1520541700.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:40.499Z,1520541700.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:40.515Z,1520541700.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:44.920Z,1520541704.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:44.956Z,1520541704.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:45.066Z,1520541705.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:45.114Z,1520541705.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:45.453Z,1520541705.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:45.474Z,1520541705.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:45.859Z,1520541705.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:45.914Z,1520541705.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:46.232Z,1520541706.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:46.279Z,1520541706.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:46.620Z,1520541706.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:46.642Z,1520541706.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:47.020Z,1520541707.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:47.035Z,1520541707.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:47.420Z,1520541707.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:47.443Z,1520541707.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:47.837Z,1520541707.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:47.868Z,1520541707.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:48.233Z,1520541708.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:48.266Z,1520541708.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:48.629Z,1520541708.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:48.645Z,1520541708.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:49.024Z,1520541709.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:49.039Z,1520541709.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:49.420Z,1520541709.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:49.443Z,1520541709.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:49.823Z,1520541709.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:49.843Z,1520541709.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:50.222Z,1520541710.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:50.249Z,1520541710.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:50.622Z,1520541710.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:50.637Z,1520541710.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:51.030Z,1520541711.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:51.046Z,1520541711.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:51.433Z,1520541711.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:51.449Z,1520541711.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:51.832Z,1520541711.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:51.847Z,1520541711.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:52.226Z,1520541712.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:52.247Z,1520541712.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:52.627Z,1520541712.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:52.642Z,1520541712.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:53.021Z,1520541713.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:53.042Z,1520541713.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:53.422Z,1520541713.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:53.437Z,1520541713.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:53.833Z,1520541713.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:53.849Z,1520541713.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:54.233Z,1520541714.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:54.249Z,1520541714.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:54.632Z,1520541714.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:54.648Z,1520541714.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:55.027Z,1520541715.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:55.043Z,1520541715.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:55.413Z,1520541715.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:55.443Z,1520541715.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:55.827Z,1520541715.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:55.847Z,1520541715.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:56.224Z,1520541716.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:56.239Z,1520541716.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:56.617Z,1520541716.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:56.649Z,1520541716.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:57.035Z,1520541717.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:57.051Z,1520541717.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:57.436Z,1520541717.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:57.459Z,1520541717.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:57.836Z,1520541717.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:57.858Z,1520541717.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:58.225Z,1520541718.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:58.244Z,1520541718.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:58.631Z,1520541718.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:58.647Z,1520541718.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:59.027Z,1520541719.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:59.042Z,1520541719.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:59.413Z,1520541719.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:59.446Z,1520541719.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:41:59.459Z,1520541719.459 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T20:41:59.830Z,1520541719.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:41:59.858Z,1520541719.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:00.237Z,1520541720.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:00.262Z,1520541720.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:00.639Z,1520541720.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:00.658Z,1520541720.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:01.018Z,1520541721.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:01.054Z,1520541721.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:01.410Z,1520541721.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:01.443Z,1520541721.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:01.818Z,1520541721.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:01.845Z,1520541721.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:02.213Z,1520541722.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:02.249Z,1520541722.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:02.615Z,1520541722.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:02.653Z,1520541722.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:03.027Z,1520541723.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:03.063Z,1520541723.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:03.441Z,1520541723.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:03.469Z,1520541723.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:03.832Z,1520541723.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:03.864Z,1520541723.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:04.221Z,1520541724.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:04.266Z,1520541724.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:04.614Z,1520541724.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:04.630Z,1520541724.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:05.020Z,1520541725.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:05.036Z,1520541725.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:05.422Z,1520541725.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:05.438Z,1520541725.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:05.829Z,1520541725.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:05.845Z,1520541725.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:06.238Z,1520541726.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:06.270Z,1520541726.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:06.629Z,1520541726.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:06.645Z,1520541726.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:07.026Z,1520541727.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:07.041Z,1520541727.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:07.426Z,1520541727.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:07.442Z,1520541727.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:07.826Z,1520541727.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:07.841Z,1520541727.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:08.229Z,1520541728.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:08.243Z,1520541728.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:08.626Z,1520541728.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:08.641Z,1520541728.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:08.655Z,1520541728.655 [CBIT](INFO): Clearing failed state for component DropWeight
2018-03-08T20:42:08.655Z,1520541728.655 [DropWeight] No Fault, FailCount= 1
2018-03-08T20:42:09.032Z,1520541729.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:09.047Z,1520541729.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:09.432Z,1520541729.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:09.447Z,1520541729.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:09.832Z,1520541729.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:09.847Z,1520541729.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:10.224Z,1520541730.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:10.246Z,1520541730.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:10.626Z,1520541730.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:10.641Z,1520541730.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:11.028Z,1520541731.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:11.043Z,1520541731.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:11.426Z,1520541731.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:11.442Z,1520541731.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:11.832Z,1520541731.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:11.848Z,1520541731.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:12.234Z,1520541732.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:12.249Z,1520541732.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:12.632Z,1520541732.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:12.654Z,1520541732.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:13.022Z,1520541733.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:13.037Z,1520541733.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:13.427Z,1520541733.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:13.446Z,1520541733.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:13.823Z,1520541733.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:13.838Z,1520541733.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:14.224Z,1520541734.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:14.246Z,1520541734.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:14.627Z,1520541734.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:14.642Z,1520541734.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:15.034Z,1520541735.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:15.049Z,1520541735.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:15.434Z,1520541735.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:15.449Z,1520541735.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:15.837Z,1520541735.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:15.858Z,1520541735.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:16.215Z,1520541736.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:16.251Z,1520541736.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:16.660Z,1520541736.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:16.702Z,1520541736.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:17.019Z,1520541737.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:17.047Z,1520541737.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:17.414Z,1520541737.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:17.441Z,1520541737.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:17.829Z,1520541737.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:17.844Z,1520541737.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:18.225Z,1520541738.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:18.240Z,1520541738.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:18.637Z,1520541738.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:18.670Z,1520541738.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:19.024Z,1520541739.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:19.039Z,1520541739.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:19.448Z,1520541739.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:19.482Z,1520541739.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:19.825Z,1520541739.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:19.866Z,1520541739.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:20.225Z,1520541740.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:20.239Z,1520541740.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:20.634Z,1520541740.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:20.654Z,1520541740.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:21.037Z,1520541741.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:21.052Z,1520541741.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:21.437Z,1520541741.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:21.451Z,1520541741.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:21.838Z,1520541741.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:21.853Z,1520541741.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:22.223Z,1520541742.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:22.253Z,1520541742.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:22.633Z,1520541742.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:22.648Z,1520541742.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:23.027Z,1520541743.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:23.046Z,1520541743.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:23.427Z,1520541743.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:23.446Z,1520541743.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:23.838Z,1520541743.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:23.853Z,1520541743.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:24.237Z,1520541744.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:24.252Z,1520541744.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:24.638Z,1520541744.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:24.653Z,1520541744.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:25.028Z,1520541745.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:25.043Z,1520541745.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:25.427Z,1520541745.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:25.443Z,1520541745.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:25.823Z,1520541745.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:25.842Z,1520541745.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:26.228Z,1520541746.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:26.243Z,1520541746.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:26.627Z,1520541746.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:26.643Z,1520541746.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:27.033Z,1520541747.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:27.048Z,1520541747.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:27.434Z,1520541747.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:27.449Z,1520541747.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:27.836Z,1520541747.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:27.851Z,1520541747.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:28.223Z,1520541748.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:28.242Z,1520541748.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:28.611Z,1520541748.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:28.638Z,1520541748.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:29.027Z,1520541749.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:29.043Z,1520541749.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:29.428Z,1520541749.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:29.450Z,1520541749.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:29.837Z,1520541749.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:29.858Z,1520541749.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:30.237Z,1520541750.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:30.252Z,1520541750.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:30.633Z,1520541750.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:30.648Z,1520541750.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:31.011Z,1520541751.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:31.046Z,1520541751.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:31.427Z,1520541751.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:31.443Z,1520541751.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:31.827Z,1520541751.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:31.842Z,1520541751.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:32.225Z,1520541752.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:32.240Z,1520541752.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:32.627Z,1520541752.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:32.642Z,1520541752.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:33.036Z,1520541753.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:33.051Z,1520541753.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:33.436Z,1520541753.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:33.451Z,1520541753.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:33.836Z,1520541753.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:33.877Z,1520541753.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:34.228Z,1520541754.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:34.251Z,1520541754.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:34.611Z,1520541754.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:34.639Z,1520541754.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:35.028Z,1520541755.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:35.043Z,1520541755.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:35.423Z,1520541755.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:35.443Z,1520541755.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:35.837Z,1520541755.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:35.858Z,1520541755.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:36.239Z,1520541756.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:36.254Z,1520541756.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:36.636Z,1520541756.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:36.651Z,1520541756.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:37.028Z,1520541757.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:37.043Z,1520541757.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:37.427Z,1520541757.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:37.442Z,1520541757.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:37.819Z,1520541757.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:37.841Z,1520541757.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:38.225Z,1520541758.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:38.240Z,1520541758.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:38.623Z,1520541758.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:38.642Z,1520541758.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:39.035Z,1520541759.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:39.050Z,1520541759.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:39.437Z,1520541759.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:39.452Z,1520541759.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:39.833Z,1520541759.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:39.849Z,1520541759.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:40.224Z,1520541760.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:40.239Z,1520541760.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:40.625Z,1520541760.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:40.646Z,1520541760.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:43.727Z,1520541763.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:43.743Z,1520541763.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:43.837Z,1520541763.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:43.881Z,1520541763.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:44.219Z,1520541764.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:44.235Z,1520541764.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:44.609Z,1520541764.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:44.632Z,1520541764.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:45.013Z,1520541765.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:45.042Z,1520541765.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:45.402Z,1520541765.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:45.436Z,1520541765.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:45.796Z,1520541765.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:45.811Z,1520541765.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:46.197Z,1520541766.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:46.212Z,1520541766.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:46.599Z,1520541766.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:46.618Z,1520541766.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:47.013Z,1520541767.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:47.028Z,1520541767.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:47.413Z,1520541767.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:47.428Z,1520541767.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:47.805Z,1520541767.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:47.821Z,1520541767.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:48.200Z,1520541768.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:48.215Z,1520541768.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:48.604Z,1520541768.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:48.619Z,1520541768.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:49.003Z,1520541769.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:49.018Z,1520541769.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:49.403Z,1520541769.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:49.418Z,1520541769.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:49.805Z,1520541769.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:49.821Z,1520541769.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:50.225Z,1520541770.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:50.247Z,1520541770.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:50.605Z,1520541770.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:50.621Z,1520541770.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:50.000Z,1520541771.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:51.015Z,1520541771.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:51.404Z,1520541771.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:51.419Z,1520541771.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:51.796Z,1520541771.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:51.811Z,1520541771.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:52.196Z,1520541772.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:52.212Z,1520541772.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:52.599Z,1520541772.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:52.614Z,1520541772.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:53.004Z,1520541773.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:53.019Z,1520541773.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:53.410Z,1520541773.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:53.430Z,1520541773.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:53.804Z,1520541773.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:53.819Z,1520541773.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:54.205Z,1520541774.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:54.219Z,1520541774.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:54.603Z,1520541774.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:54.618Z,1520541774.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:54.997Z,1520541774.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:55.021Z,1520541775.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:55.404Z,1520541775.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:55.420Z,1520541775.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:55.809Z,1520541775.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:55.825Z,1520541775.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:56.208Z,1520541776.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:56.227Z,1520541776.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:56.613Z,1520541776.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:56.634Z,1520541776.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:57.004Z,1520541777.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:57.019Z,1520541777.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:57.397Z,1520541777.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:57.418Z,1520541777.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:57.787Z,1520541777.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:57.823Z,1520541777.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:58.206Z,1520541778.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:58.221Z,1520541778.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:58.598Z,1520541778.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:58.618Z,1520541778.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:59.010Z,1520541779.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:59.025Z,1520541779.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:59.413Z,1520541779.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:59.428Z,1520541779.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:42:59.813Z,1520541779.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:42:59.828Z,1520541779.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:00.205Z,1520541780.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:00.220Z,1520541780.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:00.603Z,1520541780.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:00.619Z,1520541780.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:00.995Z,1520541780.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:01.018Z,1520541781.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:01.387Z,1520541781.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:01.423Z,1520541781.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:01.812Z,1520541781.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:01.827Z,1520541781.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:02.213Z,1520541782.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:02.229Z,1520541782.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:02.609Z,1520541782.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:02.630Z,1520541782.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:03.033Z,1520541783.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:03.060Z,1520541783.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:03.397Z,1520541783.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:03.417Z,1520541783.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:03.787Z,1520541783.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:03.826Z,1520541783.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:04.192Z,1520541784.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:04.224Z,1520541784.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:04.595Z,1520541784.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:04.626Z,1520541784.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:05.009Z,1520541785.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:05.042Z,1520541785.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:05.417Z,1520541785.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:05.432Z,1520541785.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:05.801Z,1520541785.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:05.834Z,1520541785.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:06.195Z,1520541786.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:06.227Z,1520541786.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:06.595Z,1520541786.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:06.626Z,1520541786.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:06.991Z,1520541786.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:07.023Z,1520541787.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:07.391Z,1520541787.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:07.405Z,1520541787.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:07.805Z,1520541787.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:07.832Z,1520541787.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:08.225Z,1520541788.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:08.241Z,1520541788.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:08.605Z,1520541788.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:08.639Z,1520541788.639 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:08.639Z,1520541788.639 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 259
2018-03-08T20:43:08.639Z,1520541788.639 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T20:43:08.641Z,1520541788.641 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:08.641Z,1520541788.641 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 259
2018-03-08T20:43:08.641Z,1520541788.641 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T20:43:08.643Z,1520541788.643 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:08.643Z,1520541788.643 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 259
2018-03-08T20:43:08.643Z,1520541788.643 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T20:43:08.655Z,1520541788.655 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T20:43:08.655Z,1520541788.655 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T20:43:08.655Z,1520541788.655 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T20:43:08.996Z,1520541788.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:09.046Z,1520541789.046 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T20:43:09.049Z,1520541789.049 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 259
2018-03-08T20:43:09.049Z,1520541789.049 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T20:43:09.049Z,1520541789.049 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 259
2018-03-08T20:43:09.050Z,1520541789.050 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T20:43:09.050Z,1520541789.050 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 259
2018-03-08T20:43:09.395Z,1520541789.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:09.418Z,1520541789.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T20:43:09.419Z,1520541789.419 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:43:09.419Z,1520541789.419 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:43:09.419Z,1520541789.419 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T20:43:09.420Z,1520541789.420 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:43:09.420Z,1520541789.420 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:43:09.420Z,1520541789.420 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T20:43:09.425Z,1520541789.425 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:43:09.425Z,1520541789.425 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:43:09.796Z,1520541789.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:09.811Z,1520541789.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T20:43:09.812Z,1520541789.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:10.202Z,1520541790.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:10.217Z,1520541790.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T20:43:10.218Z,1520541790.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:10.596Z,1520541790.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:10.619Z,1520541790.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T20:43:10.620Z,1520541790.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:11.009Z,1520541791.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:11.024Z,1520541791.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T20:43:11.025Z,1520541791.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:11.409Z,1520541791.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:11.424Z,1520541791.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T20:43:11.425Z,1520541791.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:11.808Z,1520541791.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:11.823Z,1520541791.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T20:43:11.825Z,1520541791.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:12.196Z,1520541792.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:12.214Z,1520541792.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T20:43:12.215Z,1520541792.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:12.604Z,1520541792.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:12.618Z,1520541792.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T20:43:12.619Z,1520541792.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:12.999Z,1520541792.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:13.014Z,1520541793.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T20:43:13.015Z,1520541793.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:13.395Z,1520541793.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:13.410Z,1520541793.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T20:43:13.411Z,1520541793.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:13.808Z,1520541793.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:13.831Z,1520541793.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T20:43:13.832Z,1520541793.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:14.217Z,1520541794.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:14.232Z,1520541794.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T20:43:14.233Z,1520541794.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:14.618Z,1520541794.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:14.632Z,1520541794.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T20:43:14.633Z,1520541794.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:15.004Z,1520541795.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:15.019Z,1520541795.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T20:43:15.019Z,1520541795.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:15.391Z,1520541795.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:15.417Z,1520541795.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T20:43:15.418Z,1520541795.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:15.791Z,1520541795.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:15.831Z,1520541795.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T20:43:15.832Z,1520541795.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:16.190Z,1520541796.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:16.225Z,1520541796.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T20:43:16.226Z,1520541796.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:16.595Z,1520541796.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:16.630Z,1520541796.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T20:43:16.631Z,1520541796.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:17.008Z,1520541797.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:17.034Z,1520541797.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T20:43:17.035Z,1520541797.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:17.405Z,1520541797.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:17.428Z,1520541797.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T20:43:17.429Z,1520541797.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:17.820Z,1520541797.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:17.835Z,1520541797.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T20:43:17.836Z,1520541797.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:18.187Z,1520541798.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:18.224Z,1520541798.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T20:43:18.225Z,1520541798.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:18.595Z,1520541798.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:18.622Z,1520541798.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T20:43:18.623Z,1520541798.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:18.991Z,1520541798.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:19.018Z,1520541799.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T20:43:19.019Z,1520541799.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:19.406Z,1520541799.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:19.421Z,1520541799.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T20:43:19.422Z,1520541799.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:19.805Z,1520541799.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:19.821Z,1520541799.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T20:43:19.822Z,1520541799.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:20.205Z,1520541800.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:20.221Z,1520541800.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T20:43:20.222Z,1520541800.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:20.605Z,1520541800.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:20.622Z,1520541800.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T20:43:20.623Z,1520541800.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:20.992Z,1520541800.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:21.023Z,1520541801.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T20:43:21.024Z,1520541801.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:21.403Z,1520541801.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:21.418Z,1520541801.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T20:43:21.419Z,1520541801.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:21.795Z,1520541801.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:21.810Z,1520541801.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T20:43:21.811Z,1520541801.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:22.198Z,1520541802.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:22.213Z,1520541802.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T20:43:22.214Z,1520541802.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:22.599Z,1520541802.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:22.614Z,1520541802.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T20:43:22.615Z,1520541802.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:23.005Z,1520541803.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:23.020Z,1520541803.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T20:43:23.021Z,1520541803.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:23.404Z,1520541803.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:23.429Z,1520541803.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T20:43:23.430Z,1520541803.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:23.808Z,1520541803.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:23.830Z,1520541803.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T20:43:23.831Z,1520541803.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:24.205Z,1520541804.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:24.219Z,1520541804.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T20:43:24.220Z,1520541804.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:24.603Z,1520541804.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:24.618Z,1520541804.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T20:43:24.619Z,1520541804.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:24.999Z,1520541804.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:25.014Z,1520541805.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T20:43:25.015Z,1520541805.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:25.395Z,1520541805.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:25.414Z,1520541805.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T20:43:25.415Z,1520541805.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:25.808Z,1520541805.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:25.823Z,1520541805.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T20:43:25.824Z,1520541805.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:26.209Z,1520541806.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:26.234Z,1520541806.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T20:43:26.235Z,1520541806.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:26.607Z,1520541806.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:26.633Z,1520541806.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T20:43:26.634Z,1520541806.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:26.988Z,1520541806.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:27.023Z,1520541807.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T20:43:27.023Z,1520541807.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:27.407Z,1520541807.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:27.421Z,1520541807.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T20:43:27.422Z,1520541807.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:27.791Z,1520541807.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:27.818Z,1520541807.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T20:43:27.819Z,1520541807.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:28.207Z,1520541808.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:28.243Z,1520541808.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T20:43:28.244Z,1520541808.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:28.591Z,1520541808.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:28.637Z,1520541808.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T20:43:28.638Z,1520541808.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:29.021Z,1520541809.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:29.037Z,1520541809.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:29.401Z,1520541809.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:29.424Z,1520541809.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:29.805Z,1520541809.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:29.829Z,1520541809.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:30.195Z,1520541810.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:30.222Z,1520541810.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:30.595Z,1520541810.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:30.621Z,1520541810.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:30.991Z,1520541810.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:31.023Z,1520541811.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:31.391Z,1520541811.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:31.423Z,1520541811.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:31.809Z,1520541811.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:31.825Z,1520541811.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:32.213Z,1520541812.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:32.238Z,1520541812.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:32.613Z,1520541812.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:32.628Z,1520541812.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:32.988Z,1520541812.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:33.017Z,1520541813.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:33.391Z,1520541813.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:33.426Z,1520541813.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:33.795Z,1520541813.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:33.828Z,1520541813.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:34.186Z,1520541814.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:34.201Z,1520541814.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:34.591Z,1520541814.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:34.627Z,1520541814.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:35.005Z,1520541815.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:35.034Z,1520541815.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:35.401Z,1520541815.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:35.425Z,1520541815.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:35.809Z,1520541815.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:35.834Z,1520541815.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:36.197Z,1520541816.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:36.212Z,1520541816.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:36.599Z,1520541816.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:36.615Z,1520541816.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:36.997Z,1520541816.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:37.018Z,1520541817.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:37.400Z,1520541817.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:37.415Z,1520541817.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:37.811Z,1520541817.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:37.842Z,1520541817.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:38.218Z,1520541818.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:38.242Z,1520541818.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:38.605Z,1520541818.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:38.626Z,1520541818.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:38.992Z,1520541818.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:39.014Z,1520541819.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:39.398Z,1520541819.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:39.416Z,1520541819.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:39.801Z,1520541819.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:39.817Z,1520541819.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:40.203Z,1520541820.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:40.219Z,1520541820.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:40.603Z,1520541820.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:40.619Z,1520541820.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:41.009Z,1520541821.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:41.024Z,1520541821.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:45.645Z,1520541825.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:45.662Z,1520541825.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:45.791Z,1520541825.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:45.827Z,1520541825.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:46.130Z,1520541826.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:46.159Z,1520541826.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:46.511Z,1520541826.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:46.527Z,1520541826.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:46.919Z,1520541826.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:46.955Z,1520541826.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:47.322Z,1520541827.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:47.339Z,1520541827.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:47.729Z,1520541827.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:47.765Z,1520541827.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:48.121Z,1520541828.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:48.139Z,1520541828.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:48.529Z,1520541828.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:48.564Z,1520541828.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:48.921Z,1520541828.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:48.938Z,1520541828.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:49.321Z,1520541829.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:49.337Z,1520541829.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:49.720Z,1520541829.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:49.736Z,1520541829.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:50.121Z,1520541830.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:50.137Z,1520541830.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:50.520Z,1520541830.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:50.537Z,1520541830.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:50.935Z,1520541830.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:50.970Z,1520541830.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:51.320Z,1520541831.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:51.339Z,1520541831.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:51.735Z,1520541831.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:51.771Z,1520541831.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:52.122Z,1520541832.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:52.138Z,1520541832.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:52.520Z,1520541832.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:52.535Z,1520541832.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:52.915Z,1520541832.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:52.967Z,1520541832.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:53.319Z,1520541833.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:53.335Z,1520541833.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:53.726Z,1520541833.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:53.742Z,1520541833.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:54.129Z,1520541834.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:54.147Z,1520541834.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:54.526Z,1520541834.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:54.547Z,1520541834.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:54.923Z,1520541834.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:54.939Z,1520541834.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:55.323Z,1520541835.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:55.339Z,1520541835.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:55.723Z,1520541835.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:55.738Z,1520541835.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:56.124Z,1520541836.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:56.140Z,1520541836.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:56.524Z,1520541836.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:56.539Z,1520541836.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:56.929Z,1520541836.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:56.945Z,1520541836.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:57.329Z,1520541837.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:57.345Z,1520541837.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:57.728Z,1520541837.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:57.750Z,1520541837.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:58.123Z,1520541838.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:58.138Z,1520541838.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:58.515Z,1520541838.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:58.535Z,1520541838.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:58.923Z,1520541838.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:58.939Z,1520541838.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:59.319Z,1520541839.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:59.335Z,1520541839.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:43:59.729Z,1520541839.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:43:59.744Z,1520541839.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:00.129Z,1520541840.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:00.150Z,1520541840.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:00.528Z,1520541840.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:00.550Z,1520541840.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:00.925Z,1520541840.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:00.941Z,1520541840.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:01.319Z,1520541841.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:01.335Z,1520541841.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:01.717Z,1520541841.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:01.737Z,1520541841.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:02.116Z,1520541842.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:02.135Z,1520541842.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:02.523Z,1520541842.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:02.539Z,1520541842.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:02.929Z,1520541842.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:02.950Z,1520541842.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:03.330Z,1520541843.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:03.345Z,1520541843.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:03.728Z,1520541843.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:03.750Z,1520541843.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:04.121Z,1520541844.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:04.137Z,1520541844.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:04.527Z,1520541844.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:04.543Z,1520541844.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:04.921Z,1520541844.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:04.937Z,1520541844.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:05.315Z,1520541845.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:05.339Z,1520541845.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:05.729Z,1520541845.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:05.745Z,1520541845.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:06.129Z,1520541846.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:06.150Z,1520541846.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:06.529Z,1520541846.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:06.550Z,1520541846.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:06.924Z,1520541846.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:06.939Z,1520541846.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:07.319Z,1520541847.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:07.335Z,1520541847.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:07.719Z,1520541847.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:07.735Z,1520541847.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:08.115Z,1520541848.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:08.144Z,1520541848.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:08.522Z,1520541848.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:08.539Z,1520541848.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:08.929Z,1520541848.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:08.947Z,1520541848.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:09.328Z,1520541849.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:09.343Z,1520541849.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:09.728Z,1520541849.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:09.751Z,1520541849.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:10.123Z,1520541850.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:10.139Z,1520541850.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:10.519Z,1520541850.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:10.538Z,1520541850.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:10.924Z,1520541850.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:10.940Z,1520541850.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:11.323Z,1520541851.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:11.339Z,1520541851.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:11.728Z,1520541851.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:11.744Z,1520541851.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:12.129Z,1520541852.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:12.151Z,1520541852.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:12.528Z,1520541852.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:12.550Z,1520541852.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:12.925Z,1520541852.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:12.941Z,1520541852.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:13.323Z,1520541853.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:13.339Z,1520541853.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:13.719Z,1520541853.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:13.735Z,1520541853.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:14.116Z,1520541854.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:14.131Z,1520541854.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:14.519Z,1520541854.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:14.535Z,1520541854.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:14.926Z,1520541854.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:14.959Z,1520541854.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:15.333Z,1520541855.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:15.348Z,1520541855.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:15.734Z,1520541855.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:15.754Z,1520541855.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:16.120Z,1520541856.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:16.136Z,1520541856.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:16.507Z,1520541856.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:16.544Z,1520541856.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:16.919Z,1520541856.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:16.939Z,1520541856.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:17.322Z,1520541857.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:17.339Z,1520541857.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:17.733Z,1520541857.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:17.749Z,1520541857.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:18.132Z,1520541858.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:18.148Z,1520541858.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:18.533Z,1520541858.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:18.554Z,1520541858.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:18.908Z,1520541858.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:18.935Z,1520541858.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:19.323Z,1520541859.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:19.339Z,1520541859.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:19.719Z,1520541859.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:19.735Z,1520541859.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:20.107Z,1520541860.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:20.144Z,1520541860.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:20.523Z,1520541860.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:20.539Z,1520541860.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:20.932Z,1520541860.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:20.948Z,1520541860.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:21.333Z,1520541861.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:21.348Z,1520541861.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:21.732Z,1520541861.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:21.748Z,1520541861.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:22.123Z,1520541862.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:22.139Z,1520541862.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:22.521Z,1520541862.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:22.537Z,1520541862.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:22.923Z,1520541862.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:22.940Z,1520541862.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:23.319Z,1520541863.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:23.335Z,1520541863.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:23.730Z,1520541863.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:23.750Z,1520541863.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:24.133Z,1520541864.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:24.148Z,1520541864.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:24.535Z,1520541864.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:24.550Z,1520541864.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:24.925Z,1520541864.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:24.941Z,1520541864.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:25.323Z,1520541865.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:25.339Z,1520541865.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:25.719Z,1520541865.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:25.735Z,1520541865.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:26.122Z,1520541866.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:26.138Z,1520541866.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:26.517Z,1520541866.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:26.537Z,1520541866.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:26.929Z,1520541866.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:26.950Z,1520541866.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:27.329Z,1520541867.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:27.344Z,1520541867.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:27.722Z,1520541867.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:27.738Z,1520541867.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:28.108Z,1520541868.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:28.131Z,1520541868.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:28.515Z,1520541868.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:28.617Z,1520541868.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:28.913Z,1520541868.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:28.929Z,1520541868.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:29.312Z,1520541869.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:29.329Z,1520541869.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:29.725Z,1520541869.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:29.742Z,1520541869.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:30.117Z,1520541870.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:30.134Z,1520541870.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:30.525Z,1520541870.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:30.543Z,1520541870.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:30.912Z,1520541870.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:30.927Z,1520541870.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:31.304Z,1520541871.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:31.320Z,1520541871.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:31.711Z,1520541871.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:31.731Z,1520541871.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:32.111Z,1520541872.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:32.148Z,1520541872.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:32.508Z,1520541872.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:32.540Z,1520541872.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:32.934Z,1520541872.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:32.954Z,1520541872.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:33.338Z,1520541873.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:33.354Z,1520541873.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:33.734Z,1520541873.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:33.755Z,1520541873.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:34.115Z,1520541874.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:34.143Z,1520541874.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:34.511Z,1520541874.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:34.545Z,1520541874.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:34.915Z,1520541874.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:34.943Z,1520541874.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:35.311Z,1520541875.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:35.343Z,1520541875.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:35.690Z,1520541875.690 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T20:44:35.690Z,1520541875.690 [NAL9602] Data Fault, FailCount= 2
2018-03-08T20:44:35.690Z,1520541875.690 [NAL9602](ERROR): Data Fault
2018-03-08T20:44:35.707Z,1520541875.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:35.754Z,1520541875.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:35.767Z,1520541875.767 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T20:44:36.090Z,1520541876.090 [NAL9602](INFO): Powering down
2018-03-08T20:44:36.107Z,1520541876.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:36.150Z,1520541876.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:36.514Z,1520541876.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:36.547Z,1520541876.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:36.914Z,1520541876.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:36.949Z,1520541876.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:36.961Z,1520541876.961 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T20:44:36.961Z,1520541876.961 [NAL9602] No Fault, FailCount= 2
2018-03-08T20:44:37.304Z,1520541877.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:37.319Z,1520541877.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:37.710Z,1520541877.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:37.751Z,1520541877.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:38.114Z,1520541878.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:38.129Z,1520541878.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:38.511Z,1520541878.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:38.526Z,1520541878.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:38.919Z,1520541878.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:38.950Z,1520541878.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:39.307Z,1520541879.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:39.322Z,1520541879.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:39.718Z,1520541879.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:39.750Z,1520541879.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:40.118Z,1520541880.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:40.155Z,1520541880.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:40.158Z,1520541880.158 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T20:44:40.159Z,1520541880.159 [Default:CheckIn:C.Wait] Stopped
2018-03-08T20:44:40.159Z,1520541880.159 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T20:44:40.159Z,1520541880.159 [Default:CheckIn:D] Running Loop=1
2018-03-08T20:44:40.518Z,1520541880.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:40.534Z,1520541880.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:40.537Z,1520541880.537 [Default:CheckIn:D] Stopped
2018-03-08T20:44:40.537Z,1520541880.537 [Default:CheckIn:E] Running Loop=1
2018-03-08T20:44:40.917Z,1520541880.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:40.934Z,1520541880.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:40.937Z,1520541880.937 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 778.928841 min 
2018-03-08T20:44:40.937Z,1520541880.937 [Default:CheckIn:E] Stopped
2018-03-08T20:44:40.937Z,1520541880.937 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T20:44:40.937Z,1520541880.937 [Default:CheckIn] Stopped
2018-03-08T20:44:40.938Z,1520541880.938 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T20:44:40.938Z,1520541880.938 [Default:CheckIn](INFO): Running loop #76
2018-03-08T20:44:40.938Z,1520541880.938 [Default:CheckIn] Running Loop=76
2018-03-08T20:44:40.938Z,1520541880.938 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T20:44:40.938Z,1520541880.938 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T20:44:41.315Z,1520541881.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:41.344Z,1520541881.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:44.567Z,1520541884.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:44.582Z,1520541884.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:44.679Z,1520541884.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:44.695Z,1520541884.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:45.033Z,1520541885.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:45.075Z,1520541885.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:45.427Z,1520541885.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:45.454Z,1520541885.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:45.834Z,1520541885.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:45.849Z,1520541885.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:46.234Z,1520541886.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:46.254Z,1520541886.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:46.630Z,1520541886.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:46.650Z,1520541886.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:47.029Z,1520541887.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:47.057Z,1520541887.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:47.438Z,1520541887.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:47.458Z,1520541887.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:47.822Z,1520541887.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:47.849Z,1520541887.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:48.224Z,1520541888.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:48.251Z,1520541888.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:48.629Z,1520541888.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:48.663Z,1520541888.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:49.039Z,1520541889.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:49.054Z,1520541889.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:49.424Z,1520541889.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:49.451Z,1520541889.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:49.830Z,1520541889.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:49.858Z,1520541889.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:50.226Z,1520541890.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:50.253Z,1520541890.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:50.630Z,1520541890.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:50.657Z,1520541890.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:51.027Z,1520541891.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:51.055Z,1520541891.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:51.422Z,1520541891.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:51.456Z,1520541891.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:51.827Z,1520541891.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:51.862Z,1520541891.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:52.227Z,1520541892.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:52.254Z,1520541892.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:52.623Z,1520541892.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:52.659Z,1520541892.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:53.020Z,1520541893.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:53.048Z,1520541893.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:53.427Z,1520541893.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:53.459Z,1520541893.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:53.826Z,1520541893.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:53.863Z,1520541893.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:54.235Z,1520541894.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:54.261Z,1520541894.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:54.628Z,1520541894.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:54.667Z,1520541894.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:55.030Z,1520541895.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:55.065Z,1520541895.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:55.420Z,1520541895.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:55.435Z,1520541895.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:55.827Z,1520541895.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:55.843Z,1520541895.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:56.234Z,1520541896.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:56.278Z,1520541896.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:56.627Z,1520541896.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:56.642Z,1520541896.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:57.034Z,1520541897.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:57.075Z,1520541897.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:57.434Z,1520541897.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:57.449Z,1520541897.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:57.836Z,1520541897.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:57.851Z,1520541897.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:58.235Z,1520541898.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:58.254Z,1520541898.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:58.628Z,1520541898.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:58.648Z,1520541898.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:59.030Z,1520541899.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:59.045Z,1520541899.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:59.434Z,1520541899.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:59.449Z,1520541899.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:44:59.837Z,1520541899.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:44:59.853Z,1520541899.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:00.238Z,1520541900.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:00.253Z,1520541900.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:00.640Z,1520541900.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:00.655Z,1520541900.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:01.030Z,1520541901.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:01.045Z,1520541901.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:01.432Z,1520541901.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:01.447Z,1520541901.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:01.831Z,1520541901.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:01.854Z,1520541901.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:02.241Z,1520541902.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:02.256Z,1520541902.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:02.639Z,1520541902.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:02.654Z,1520541902.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:03.038Z,1520541903.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:03.059Z,1520541903.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:03.438Z,1520541903.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:03.453Z,1520541903.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:03.838Z,1520541903.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:03.853Z,1520541903.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:04.242Z,1520541904.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:04.268Z,1520541904.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:04.638Z,1520541904.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:04.654Z,1520541904.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:05.032Z,1520541905.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:05.047Z,1520541905.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:05.429Z,1520541905.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:05.457Z,1520541905.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:05.838Z,1520541905.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:05.853Z,1520541905.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:06.206Z,1520541906.206 [NAL9602](INFO): Powering up NAL9602
2018-03-08T20:45:06.223Z,1520541906.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:06.267Z,1520541906.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:06.630Z,1520541906.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:06.657Z,1520541906.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:07.026Z,1520541907.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:07.053Z,1520541907.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:07.429Z,1520541907.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:07.461Z,1520541907.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:07.830Z,1520541907.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:07.856Z,1520541907.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:08.222Z,1520541908.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:08.259Z,1520541908.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:08.624Z,1520541908.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:08.651Z,1520541908.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:09.030Z,1520541909.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:09.068Z,1520541909.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:09.426Z,1520541909.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:09.463Z,1520541909.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:09.826Z,1520541909.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:09.841Z,1520541909.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:10.230Z,1520541910.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:10.267Z,1520541910.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:10.634Z,1520541910.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:10.649Z,1520541910.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:11.027Z,1520541911.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:11.042Z,1520541911.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:11.442Z,1520541911.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:11.459Z,1520541911.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:11.835Z,1520541911.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:11.850Z,1520541911.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:12.236Z,1520541912.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:12.251Z,1520541912.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:12.635Z,1520541912.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:12.654Z,1520541912.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:13.034Z,1520541913.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:13.048Z,1520541913.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:13.432Z,1520541913.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:13.447Z,1520541913.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:13.836Z,1520541913.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:13.851Z,1520541913.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:14.236Z,1520541914.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:14.251Z,1520541914.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:14.636Z,1520541914.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:14.652Z,1520541914.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:15.032Z,1520541915.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:15.060Z,1520541915.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:15.439Z,1520541915.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:15.454Z,1520541915.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:15.839Z,1520541915.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:15.854Z,1520541915.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:16.232Z,1520541916.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:16.252Z,1520541916.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:16.644Z,1520541916.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:16.660Z,1520541916.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:17.007Z,1520541917.007 [NAL9602](INFO): NAL9602 initialized
2018-03-08T20:45:17.034Z,1520541917.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:17.056Z,1520541917.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:17.441Z,1520541917.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:17.456Z,1520541917.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:17.838Z,1520541917.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:17.866Z,1520541917.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:18.249Z,1520541918.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:18.264Z,1520541918.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:18.650Z,1520541918.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:18.670Z,1520541918.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:19.041Z,1520541919.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:19.056Z,1520541919.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:19.423Z,1520541919.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:19.456Z,1520541919.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:19.830Z,1520541919.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:19.859Z,1520541919.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:20.241Z,1520541920.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:20.268Z,1520541920.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:20.654Z,1520541920.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:20.669Z,1520541920.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:21.051Z,1520541921.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:21.067Z,1520541921.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:21.423Z,1520541921.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:21.455Z,1520541921.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:21.830Z,1520541921.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:21.859Z,1520541921.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:22.227Z,1520541922.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:22.253Z,1520541922.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:22.642Z,1520541922.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:22.658Z,1520541922.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:23.042Z,1520541923.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:23.057Z,1520541923.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:23.463Z,1520541923.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:23.483Z,1520541923.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:23.850Z,1520541923.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:23.883Z,1520541923.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:24.231Z,1520541924.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:24.258Z,1520541924.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:24.626Z,1520541924.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:24.659Z,1520541924.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:25.049Z,1520541925.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:25.070Z,1520541925.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:25.453Z,1520541925.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:25.468Z,1520541925.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:25.846Z,1520541925.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:25.883Z,1520541925.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:26.231Z,1520541926.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:26.259Z,1520541926.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:26.627Z,1520541926.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:26.655Z,1520541926.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:27.051Z,1520541927.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:27.066Z,1520541927.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:27.453Z,1520541927.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:27.474Z,1520541927.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:27.840Z,1520541927.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:27.867Z,1520541927.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:28.227Z,1520541928.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:28.268Z,1520541928.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:28.631Z,1520541928.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:28.667Z,1520541928.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:29.037Z,1520541929.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:29.064Z,1520541929.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:29.451Z,1520541929.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:29.466Z,1520541929.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:29.849Z,1520541929.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:29.874Z,1520541929.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:30.228Z,1520541930.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:30.259Z,1520541930.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:30.631Z,1520541930.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:30.670Z,1520541930.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:31.041Z,1520541931.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:31.079Z,1520541931.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:31.455Z,1520541931.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:31.475Z,1520541931.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:31.841Z,1520541931.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:31.874Z,1520541931.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:32.231Z,1520541932.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:32.267Z,1520541932.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:32.627Z,1520541932.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:32.643Z,1520541932.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:33.045Z,1520541933.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:33.075Z,1520541933.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:33.450Z,1520541933.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:33.476Z,1520541933.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:33.845Z,1520541933.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:33.871Z,1520541933.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:34.233Z,1520541934.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:34.248Z,1520541934.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:34.631Z,1520541934.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:34.647Z,1520541934.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:35.033Z,1520541935.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:35.049Z,1520541935.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:35.449Z,1520541935.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:35.487Z,1520541935.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:35.845Z,1520541935.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:35.881Z,1520541935.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:36.236Z,1520541936.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:36.252Z,1520541936.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:36.635Z,1520541936.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:36.650Z,1520541936.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:37.053Z,1520541937.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:37.091Z,1520541937.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:37.444Z,1520541937.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:37.459Z,1520541937.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:37.847Z,1520541937.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:37.868Z,1520541937.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:38.241Z,1520541938.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:38.265Z,1520541938.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:38.636Z,1520541938.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:38.667Z,1520541938.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:39.047Z,1520541939.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:39.067Z,1520541939.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:39.463Z,1520541939.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:39.496Z,1520541939.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:39.848Z,1520541939.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:39.890Z,1520541939.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:40.237Z,1520541940.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:40.253Z,1520541940.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:40.627Z,1520541940.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:40.663Z,1520541940.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:41.050Z,1520541941.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:41.070Z,1520541941.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:41.451Z,1520541941.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:41.467Z,1520541941.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:45.758Z,1520541945.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:45.779Z,1520541945.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:45.906Z,1520541945.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:45.930Z,1520541945.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:46.266Z,1520541946.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:46.322Z,1520541946.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:46.668Z,1520541946.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:46.689Z,1520541946.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:47.071Z,1520541947.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:47.089Z,1520541947.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:47.472Z,1520541947.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:47.486Z,1520541947.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:47.868Z,1520541947.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:47.910Z,1520541947.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:48.262Z,1520541948.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:48.279Z,1520541948.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:48.664Z,1520541948.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:48.683Z,1520541948.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:49.067Z,1520541949.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:49.086Z,1520541949.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:49.459Z,1520541949.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:49.511Z,1520541949.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:49.864Z,1520541949.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:49.881Z,1520541949.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:50.269Z,1520541950.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:50.288Z,1520541950.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:50.672Z,1520541950.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:50.687Z,1520541950.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:51.069Z,1520541951.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:51.109Z,1520541951.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:51.463Z,1520541951.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:51.487Z,1520541951.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:51.863Z,1520541951.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:51.883Z,1520541951.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:52.262Z,1520541952.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:52.279Z,1520541952.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:52.663Z,1520541952.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:52.710Z,1520541952.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:53.068Z,1520541953.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:53.089Z,1520541953.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:53.472Z,1520541953.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:53.494Z,1520541953.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:53.871Z,1520541953.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:53.886Z,1520541953.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:54.263Z,1520541954.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:54.311Z,1520541954.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:54.665Z,1520541954.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:54.684Z,1520541954.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:55.053Z,1520541955.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:55.079Z,1520541955.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:55.467Z,1520541955.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:55.482Z,1520541955.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:55.862Z,1520541955.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:55.888Z,1520541955.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:56.272Z,1520541956.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:56.292Z,1520541956.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:56.675Z,1520541956.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:56.691Z,1520541956.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:57.077Z,1520541957.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:57.092Z,1520541957.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:57.448Z,1520541957.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:57.495Z,1520541957.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:57.864Z,1520541957.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:57.882Z,1520541957.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:58.265Z,1520541958.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:58.290Z,1520541958.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:58.648Z,1520541958.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:58.686Z,1520541958.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:59.069Z,1520541959.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:59.108Z,1520541959.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:59.482Z,1520541959.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:59.514Z,1520541959.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:45:59.870Z,1520541959.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:45:59.889Z,1520541959.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:00.265Z,1520541960.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:00.282Z,1520541960.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:00.664Z,1520541960.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:00.712Z,1520541960.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:01.045Z,1520541961.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:01.073Z,1520541961.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:01.460Z,1520541961.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:01.481Z,1520541961.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:01.867Z,1520541961.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:01.882Z,1520541961.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:02.272Z,1520541962.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:02.318Z,1520541962.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:02.672Z,1520541962.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:02.692Z,1520541962.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:03.075Z,1520541963.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:03.118Z,1520541963.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:03.444Z,1520541963.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:03.490Z,1520541963.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:03.860Z,1520541963.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:03.911Z,1520541963.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:04.265Z,1520541964.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:04.283Z,1520541964.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:04.662Z,1520541964.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:04.682Z,1520541964.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:05.075Z,1520541965.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:05.090Z,1520541965.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:05.474Z,1520541965.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:05.509Z,1520541965.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:05.869Z,1520541965.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:05.889Z,1520541965.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:06.263Z,1520541966.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:06.283Z,1520541966.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:06.663Z,1520541966.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:06.679Z,1520541966.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:07.044Z,1520541967.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:07.087Z,1520541967.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:07.463Z,1520541967.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:07.481Z,1520541967.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:07.860Z,1520541967.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:07.882Z,1520541967.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:08.276Z,1520541968.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:08.291Z,1520541968.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:08.672Z,1520541968.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:08.713Z,1520541968.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:09.073Z,1520541969.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:09.115Z,1520541969.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:09.445Z,1520541969.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:09.480Z,1520541969.480 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:09.480Z,1520541969.480 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 260
2018-03-08T20:46:09.480Z,1520541969.480 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T20:46:09.486Z,1520541969.486 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:09.486Z,1520541969.486 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 260
2018-03-08T20:46:09.486Z,1520541969.486 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T20:46:09.488Z,1520541969.488 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:09.488Z,1520541969.488 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 260
2018-03-08T20:46:09.488Z,1520541969.488 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T20:46:09.516Z,1520541969.516 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T20:46:09.521Z,1520541969.521 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T20:46:09.521Z,1520541969.521 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T20:46:09.846Z,1520541969.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:09.897Z,1520541969.897 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T20:46:09.897Z,1520541969.897 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 260
2018-03-08T20:46:09.897Z,1520541969.897 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T20:46:09.897Z,1520541969.897 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 260
2018-03-08T20:46:09.898Z,1520541969.898 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T20:46:09.898Z,1520541969.898 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 260
2018-03-08T20:46:10.250Z,1520541970.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:10.283Z,1520541970.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T20:46:10.283Z,1520541970.283 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:46:10.283Z,1520541970.283 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:46:10.284Z,1520541970.284 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T20:46:10.284Z,1520541970.284 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:46:10.285Z,1520541970.285 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:46:10.285Z,1520541970.285 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T20:46:10.285Z,1520541970.285 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:46:10.286Z,1520541970.286 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:46:10.647Z,1520541970.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:10.689Z,1520541970.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T20:46:10.690Z,1520541970.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:11.077Z,1520541971.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:11.092Z,1520541971.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T20:46:11.093Z,1520541971.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:11.474Z,1520541971.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:11.506Z,1520541971.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T20:46:11.507Z,1520541971.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:11.869Z,1520541971.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:11.902Z,1520541971.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T20:46:11.903Z,1520541971.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:12.255Z,1520541972.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:12.286Z,1520541972.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T20:46:12.287Z,1520541972.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:12.651Z,1520541972.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:12.691Z,1520541972.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T20:46:12.692Z,1520541972.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:13.048Z,1520541973.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:13.090Z,1520541973.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T20:46:13.091Z,1520541973.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:13.451Z,1520541973.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:13.488Z,1520541973.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T20:46:13.491Z,1520541973.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:13.854Z,1520541973.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:13.885Z,1520541973.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T20:46:13.887Z,1520541973.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:14.277Z,1520541974.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:14.292Z,1520541974.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T20:46:14.293Z,1520541974.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:14.673Z,1520541974.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:14.688Z,1520541974.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T20:46:14.689Z,1520541974.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:15.075Z,1520541975.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:15.102Z,1520541975.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T20:46:15.103Z,1520541975.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:15.448Z,1520541975.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:15.482Z,1520541975.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T20:46:15.483Z,1520541975.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:15.854Z,1520541975.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:15.885Z,1520541975.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T20:46:15.886Z,1520541975.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:16.256Z,1520541976.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:16.285Z,1520541976.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T20:46:16.286Z,1520541976.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:16.656Z,1520541976.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:16.694Z,1520541976.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T20:46:16.695Z,1520541976.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:17.068Z,1520541977.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:17.103Z,1520541977.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T20:46:17.104Z,1520541977.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:17.476Z,1520541977.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:17.506Z,1520541977.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T20:46:17.507Z,1520541977.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:17.871Z,1520541977.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:17.902Z,1520541977.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T20:46:17.903Z,1520541977.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:18.256Z,1520541978.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:18.302Z,1520541978.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T20:46:18.303Z,1520541978.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:18.659Z,1520541978.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:18.673Z,1520541978.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T20:46:18.674Z,1520541978.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:19.046Z,1520541979.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:19.076Z,1520541979.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T20:46:19.081Z,1520541979.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:19.463Z,1520541979.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:19.559Z,1520541979.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T20:46:19.560Z,1520541979.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:19.859Z,1520541979.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:19.898Z,1520541979.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T20:46:19.899Z,1520541979.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:20.269Z,1520541980.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:20.302Z,1520541980.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T20:46:20.303Z,1520541980.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:20.674Z,1520541980.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:20.697Z,1520541980.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T20:46:20.698Z,1520541980.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:21.071Z,1520541981.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:21.096Z,1520541981.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T20:46:21.097Z,1520541981.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:21.455Z,1520541981.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:21.500Z,1520541981.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T20:46:21.501Z,1520541981.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:21.858Z,1520541981.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:21.873Z,1520541981.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T20:46:21.873Z,1520541981.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:22.260Z,1520541982.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:22.282Z,1520541982.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T20:46:22.302Z,1520541982.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:22.654Z,1520541982.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:22.680Z,1520541982.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T20:46:22.685Z,1520541982.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:23.065Z,1520541983.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:23.106Z,1520541983.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T20:46:23.107Z,1520541983.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:23.465Z,1520541983.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:23.489Z,1520541983.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T20:46:23.490Z,1520541983.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:23.865Z,1520541983.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:23.884Z,1520541983.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T20:46:23.885Z,1520541983.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:24.264Z,1520541984.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:24.286Z,1520541984.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T20:46:24.287Z,1520541984.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:24.662Z,1520541984.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:24.707Z,1520541984.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T20:46:24.708Z,1520541984.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:25.052Z,1520541985.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:25.068Z,1520541985.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T20:46:25.069Z,1520541985.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:25.459Z,1520541985.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:25.479Z,1520541985.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T20:46:25.480Z,1520541985.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:25.862Z,1520541985.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:25.879Z,1520541985.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T20:46:25.880Z,1520541985.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:26.265Z,1520541986.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:26.307Z,1520541986.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T20:46:26.308Z,1520541986.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:26.665Z,1520541986.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:26.689Z,1520541986.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T20:46:26.690Z,1520541986.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:27.071Z,1520541987.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:27.088Z,1520541987.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T20:46:27.089Z,1520541987.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:27.452Z,1520541987.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:27.486Z,1520541987.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T20:46:27.487Z,1520541987.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:27.863Z,1520541987.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:27.898Z,1520541987.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T20:46:27.899Z,1520541987.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:28.264Z,1520541988.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:28.282Z,1520541988.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T20:46:28.283Z,1520541988.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:28.663Z,1520541988.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:28.682Z,1520541988.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T20:46:28.683Z,1520541988.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:29.073Z,1520541989.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:29.088Z,1520541989.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T20:46:29.089Z,1520541989.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:29.473Z,1520541989.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:29.512Z,1520541989.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:29.869Z,1520541989.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:29.890Z,1520541989.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:30.252Z,1520541990.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:30.283Z,1520541990.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:30.668Z,1520541990.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:30.684Z,1520541990.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:31.051Z,1520541991.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:31.094Z,1520541991.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:31.451Z,1520541991.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:31.482Z,1520541991.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:31.851Z,1520541991.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:31.885Z,1520541991.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:32.277Z,1520541992.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:32.293Z,1520541992.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:32.673Z,1520541992.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:32.712Z,1520541992.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:33.073Z,1520541993.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:33.093Z,1520541993.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:33.464Z,1520541993.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:33.484Z,1520541993.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:33.851Z,1520541993.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:33.882Z,1520541993.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:34.252Z,1520541994.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:34.279Z,1520541994.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:34.651Z,1520541994.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:34.698Z,1520541994.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:35.076Z,1520541995.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:35.092Z,1520541995.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:35.474Z,1520541995.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:35.498Z,1520541995.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:35.879Z,1520541995.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:35.911Z,1520541995.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:36.255Z,1520541996.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:36.289Z,1520541996.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:36.652Z,1520541996.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:36.695Z,1520541996.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:37.055Z,1520541997.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:37.089Z,1520541997.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:37.451Z,1520541997.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:37.498Z,1520541997.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:37.855Z,1520541997.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:37.892Z,1520541997.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:38.262Z,1520541998.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:38.305Z,1520541998.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:38.676Z,1520541998.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:38.691Z,1520541998.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:39.081Z,1520541999.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:39.118Z,1520541999.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:39.450Z,1520541999.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:39.502Z,1520541999.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:39.858Z,1520541999.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:39.895Z,1520541999.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:40.254Z,1520542000.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:40.294Z,1520542000.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:40.659Z,1520542000.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:40.699Z,1520542000.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:41.070Z,1520542001.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:41.105Z,1520542001.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:41.480Z,1520542001.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:41.506Z,1520542001.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:44.569Z,1520542004.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:44.602Z,1520542004.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:44.700Z,1520542004.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:44.715Z,1520542004.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:45.061Z,1520542005.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:45.079Z,1520542005.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:45.461Z,1520542005.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:45.510Z,1520542005.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:45.858Z,1520542005.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:45.874Z,1520542005.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:46.276Z,1520542006.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:46.302Z,1520542006.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:46.671Z,1520542006.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:46.698Z,1520542006.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:47.073Z,1520542007.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:47.236Z,1520542007.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:47.460Z,1520542007.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:47.476Z,1520542007.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:47.860Z,1520542007.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:47.884Z,1520542007.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:48.262Z,1520542008.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:48.280Z,1520542008.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:48.665Z,1520542008.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:48.706Z,1520542008.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:49.065Z,1520542009.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:49.085Z,1520542009.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:49.470Z,1520542009.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:49.489Z,1520542009.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:49.872Z,1520542009.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:49.913Z,1520542009.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:50.259Z,1520542010.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:50.308Z,1520542010.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:50.655Z,1520542010.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:50.671Z,1520542010.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:51.060Z,1520542011.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:51.081Z,1520542011.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:51.467Z,1520542011.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:51.483Z,1520542011.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:51.862Z,1520542011.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:51.906Z,1520542011.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:52.269Z,1520542012.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:52.290Z,1520542012.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:52.671Z,1520542012.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:52.690Z,1520542012.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:53.070Z,1520542013.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:53.086Z,1520542013.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:53.463Z,1520542013.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:53.511Z,1520542013.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:53.853Z,1520542013.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:53.882Z,1520542013.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:54.263Z,1520542014.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:54.283Z,1520542014.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:54.658Z,1520542014.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:54.683Z,1520542014.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:55.069Z,1520542015.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:55.110Z,1520542015.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:55.472Z,1520542015.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:55.492Z,1520542015.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:55.875Z,1520542015.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:55.891Z,1520542015.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:56.266Z,1520542016.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:56.282Z,1520542016.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:56.657Z,1520542016.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:56.694Z,1520542016.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:57.064Z,1520542017.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:57.082Z,1520542017.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:57.464Z,1520542017.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:57.485Z,1520542017.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:57.865Z,1520542017.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:57.881Z,1520542017.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:58.273Z,1520542018.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:58.313Z,1520542018.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:58.672Z,1520542018.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:58.692Z,1520542018.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:59.074Z,1520542019.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:59.091Z,1520542019.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:59.468Z,1520542019.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:59.483Z,1520542019.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:46:59.859Z,1520542019.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:46:59.894Z,1520542019.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:00.265Z,1520542020.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:00.283Z,1520542020.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:00.651Z,1520542020.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:00.688Z,1520542020.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:01.078Z,1520542021.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:01.093Z,1520542021.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:01.469Z,1520542021.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:01.503Z,1520542021.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:01.879Z,1520542021.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:01.898Z,1520542021.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:02.254Z,1520542022.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:02.287Z,1520542022.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:02.646Z,1520542022.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:02.684Z,1520542022.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:03.052Z,1520542023.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:03.083Z,1520542023.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:03.455Z,1520542023.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:03.488Z,1520542023.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:03.846Z,1520542023.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:03.875Z,1520542023.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:04.281Z,1520542024.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:04.297Z,1520542024.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:04.673Z,1520542024.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:04.707Z,1520542024.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:05.074Z,1520542025.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:05.094Z,1520542025.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:05.451Z,1520542025.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:05.482Z,1520542025.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:05.851Z,1520542025.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:05.887Z,1520542025.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:06.255Z,1520542026.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:06.270Z,1520542026.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:06.659Z,1520542026.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:06.695Z,1520542026.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:07.071Z,1520542027.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:07.100Z,1520542027.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:07.468Z,1520542027.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:07.491Z,1520542027.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:07.873Z,1520542027.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:07.904Z,1520542027.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:08.260Z,1520542028.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:08.302Z,1520542028.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:08.659Z,1520542028.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:08.680Z,1520542028.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:09.062Z,1520542029.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:09.079Z,1520542029.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:09.460Z,1520542029.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:09.507Z,1520542029.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:09.860Z,1520542029.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:09.876Z,1520542029.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:10.265Z,1520542030.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:10.285Z,1520542030.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:10.675Z,1520542030.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:10.707Z,1520542030.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:11.061Z,1520542031.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:11.105Z,1520542031.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:11.459Z,1520542031.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:11.475Z,1520542031.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:11.858Z,1520542031.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:11.879Z,1520542031.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:12.263Z,1520542032.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:12.281Z,1520542032.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:12.661Z,1520542032.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:12.707Z,1520542032.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:13.061Z,1520542033.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:13.077Z,1520542033.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:13.475Z,1520542033.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:13.508Z,1520542033.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:13.868Z,1520542033.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:13.891Z,1520542033.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:14.264Z,1520542034.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:14.310Z,1520542034.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:14.662Z,1520542034.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:14.677Z,1520542034.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:15.059Z,1520542035.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:15.083Z,1520542035.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:15.468Z,1520542035.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:15.483Z,1520542035.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:15.863Z,1520542035.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:15.912Z,1520542035.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:16.269Z,1520542036.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:16.290Z,1520542036.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:16.671Z,1520542036.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:16.689Z,1520542036.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:17.072Z,1520542037.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:17.087Z,1520542037.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:17.460Z,1520542037.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:17.513Z,1520542037.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:17.855Z,1520542037.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:17.880Z,1520542037.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:18.263Z,1520542038.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:18.284Z,1520542038.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:18.660Z,1520542038.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:18.678Z,1520542038.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:19.072Z,1520542039.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:19.113Z,1520542039.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:19.472Z,1520542039.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:19.493Z,1520542039.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:19.875Z,1520542039.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:19.891Z,1520542039.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:20.261Z,1520542040.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:20.279Z,1520542040.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:20.660Z,1520542040.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:20.718Z,1520542040.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:21.076Z,1520542041.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:21.127Z,1520542041.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:21.461Z,1520542041.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:21.491Z,1520542041.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:21.852Z,1520542041.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:21.907Z,1520542041.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:22.277Z,1520542042.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:22.306Z,1520542042.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:22.675Z,1520542042.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:22.703Z,1520542042.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:23.062Z,1520542043.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:23.093Z,1520542043.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:23.451Z,1520542043.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:23.494Z,1520542043.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:23.855Z,1520542043.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:23.899Z,1520542043.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:24.255Z,1520542044.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:24.293Z,1520542044.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:24.654Z,1520542044.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:24.698Z,1520542044.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:25.068Z,1520542045.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:25.102Z,1520542045.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:25.465Z,1520542045.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:25.496Z,1520542045.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:25.869Z,1520542045.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:25.900Z,1520542045.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:26.259Z,1520542046.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:26.302Z,1520542046.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:26.654Z,1520542046.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:26.690Z,1520542046.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:27.059Z,1520542047.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:27.074Z,1520542047.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:27.453Z,1520542047.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:27.468Z,1520542047.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:27.862Z,1520542047.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:27.899Z,1520542047.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:28.276Z,1520542048.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:28.305Z,1520542048.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:28.669Z,1520542048.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:28.708Z,1520542048.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:29.066Z,1520542049.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:29.093Z,1520542049.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:29.460Z,1520542049.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:29.481Z,1520542049.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:29.861Z,1520542049.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:29.880Z,1520542049.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:30.260Z,1520542050.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:30.307Z,1520542050.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:30.659Z,1520542050.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:30.674Z,1520542050.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:31.078Z,1520542051.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:31.108Z,1520542051.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:31.468Z,1520542051.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:31.484Z,1520542051.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:31.873Z,1520542051.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:31.910Z,1520542051.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:32.260Z,1520542052.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:32.288Z,1520542052.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:32.658Z,1520542052.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:32.679Z,1520542052.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:33.063Z,1520542053.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:33.080Z,1520542053.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:33.462Z,1520542053.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:33.509Z,1520542053.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:33.863Z,1520542053.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:33.881Z,1520542053.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:34.270Z,1520542054.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:34.289Z,1520542054.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:34.672Z,1520542054.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:34.713Z,1520542054.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:35.064Z,1520542055.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:35.108Z,1520542055.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:35.460Z,1520542055.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:35.474Z,1520542055.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:35.862Z,1520542055.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:35.883Z,1520542055.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:36.261Z,1520542056.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:36.279Z,1520542056.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:36.663Z,1520542056.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:36.687Z,1520542056.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:37.065Z,1520542057.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:37.085Z,1520542057.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:37.470Z,1520542057.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:37.489Z,1520542057.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:37.868Z,1520542057.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:37.884Z,1520542057.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:38.262Z,1520542058.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:38.309Z,1520542058.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:38.660Z,1520542058.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:38.675Z,1520542058.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:39.060Z,1520542059.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:39.080Z,1520542059.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:39.465Z,1520542059.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:39.481Z,1520542059.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:39.862Z,1520542059.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:39.909Z,1520542059.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:40.265Z,1520542060.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:40.283Z,1520542060.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:40.671Z,1520542060.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:40.689Z,1520542060.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:41.071Z,1520542061.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:41.086Z,1520542061.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:41.464Z,1520542061.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:41.509Z,1520542061.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:41.875Z,1520542061.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:41.916Z,1520542061.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:46.209Z,1520542066.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:46.226Z,1520542066.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:46.333Z,1520542066.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:46.348Z,1520542066.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:46.704Z,1520542066.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:46.736Z,1520542066.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:47.091Z,1520542067.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:47.106Z,1520542067.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:47.501Z,1520542067.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:47.531Z,1520542067.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:47.892Z,1520542067.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:47.910Z,1520542067.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:48.283Z,1520542068.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:48.301Z,1520542068.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:48.685Z,1520542068.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:48.711Z,1520542068.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:49.093Z,1520542069.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:49.109Z,1520542069.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:49.495Z,1520542069.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:49.513Z,1520542069.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:49.896Z,1520542069.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:49.911Z,1520542069.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:50.291Z,1520542070.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:50.307Z,1520542070.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:50.689Z,1520542070.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:50.704Z,1520542070.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:51.078Z,1520542071.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:51.127Z,1520542071.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:51.491Z,1520542071.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:51.534Z,1520542071.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:51.893Z,1520542071.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:51.909Z,1520542071.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:52.295Z,1520542072.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:52.311Z,1520542072.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:52.695Z,1520542072.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:52.712Z,1520542072.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:53.096Z,1520542073.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:53.134Z,1520542073.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:53.494Z,1520542073.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:53.517Z,1520542073.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:53.878Z,1520542073.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:53.907Z,1520542073.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:54.271Z,1520542074.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:54.307Z,1520542074.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:54.680Z,1520542074.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:54.718Z,1520542074.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:55.099Z,1520542075.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:55.115Z,1520542075.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:55.502Z,1520542075.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:55.518Z,1520542075.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:55.890Z,1520542075.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:55.923Z,1520542075.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:56.270Z,1520542076.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:56.308Z,1520542076.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:56.678Z,1520542076.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:56.719Z,1520542076.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:57.083Z,1520542077.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:57.110Z,1520542077.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:57.475Z,1520542077.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:57.511Z,1520542077.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:57.870Z,1520542077.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:57.910Z,1520542077.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:58.299Z,1520542078.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:58.319Z,1520542078.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:58.697Z,1520542078.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:58.712Z,1520542078.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:59.103Z,1520542079.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:59.118Z,1520542079.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:59.475Z,1520542079.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:59.507Z,1520542079.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:47:59.886Z,1520542079.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:47:59.923Z,1520542079.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:00.283Z,1520542080.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:00.310Z,1520542080.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:00.675Z,1520542080.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:00.714Z,1520542080.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:01.088Z,1520542081.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:01.123Z,1520542081.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:01.502Z,1520542081.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:01.518Z,1520542081.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:01.893Z,1520542081.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:01.917Z,1520542081.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:02.274Z,1520542082.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:02.318Z,1520542082.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:02.680Z,1520542082.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:02.711Z,1520542082.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:03.078Z,1520542083.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:03.111Z,1520542083.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:03.482Z,1520542083.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:03.514Z,1520542083.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:03.878Z,1520542083.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:03.911Z,1520542083.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:04.292Z,1520542084.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:04.326Z,1520542084.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:04.694Z,1520542084.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:04.726Z,1520542084.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:05.093Z,1520542085.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:05.121Z,1520542085.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:05.475Z,1520542085.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:05.522Z,1520542085.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:05.881Z,1520542085.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:05.922Z,1520542085.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:06.282Z,1520542086.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:06.314Z,1520542086.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:06.686Z,1520542086.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:06.741Z,1520542086.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:07.091Z,1520542087.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:07.110Z,1520542087.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:07.493Z,1520542087.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:07.583Z,1520542087.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:07.891Z,1520542087.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:07.910Z,1520542087.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:08.281Z,1520542088.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:08.297Z,1520542088.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:08.675Z,1520542088.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:08.706Z,1520542088.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:09.076Z,1520542089.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:09.097Z,1520542089.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:09.500Z,1520542089.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:09.515Z,1520542089.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:09.880Z,1520542089.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:09.896Z,1520542089.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:10.291Z,1520542090.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:10.371Z,1520542090.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:10.692Z,1520542090.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:10.707Z,1520542090.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:11.091Z,1520542091.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:11.106Z,1520542091.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:11.478Z,1520542091.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:11.507Z,1520542091.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:11.875Z,1520542091.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:11.915Z,1520542091.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:12.275Z,1520542092.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:12.307Z,1520542092.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:12.677Z,1520542092.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:12.715Z,1520542092.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:13.089Z,1520542093.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:13.122Z,1520542093.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:13.509Z,1520542093.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:13.524Z,1520542093.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:13.895Z,1520542093.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:13.918Z,1520542093.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:14.283Z,1520542094.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:14.298Z,1520542094.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:14.679Z,1520542094.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:14.718Z,1520542094.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:15.079Z,1520542095.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:15.120Z,1520542095.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:15.490Z,1520542095.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:15.529Z,1520542095.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:15.883Z,1520542095.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:15.898Z,1520542095.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:16.284Z,1520542096.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:16.303Z,1520542096.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:16.700Z,1520542096.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:16.727Z,1520542096.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:17.092Z,1520542097.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:17.107Z,1520542097.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:17.486Z,1520542097.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:17.502Z,1520542097.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:17.887Z,1520542097.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:17.902Z,1520542097.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:18.285Z,1520542098.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:18.330Z,1520542098.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:18.678Z,1520542098.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:18.722Z,1520542098.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:19.099Z,1520542099.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:19.114Z,1520542099.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:19.497Z,1520542099.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:19.518Z,1520542099.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:19.899Z,1520542099.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:19.914Z,1520542099.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:20.291Z,1520542100.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:20.307Z,1520542100.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:20.691Z,1520542100.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:20.710Z,1520542100.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:21.089Z,1520542101.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:21.110Z,1520542101.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:21.483Z,1520542101.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:21.511Z,1520542101.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:21.891Z,1520542101.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:21.938Z,1520542101.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:22.294Z,1520542102.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:22.317Z,1520542102.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:22.700Z,1520542102.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:22.715Z,1520542102.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:23.104Z,1520542103.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:23.119Z,1520542103.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:23.471Z,1520542103.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:23.502Z,1520542103.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:23.885Z,1520542103.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:23.909Z,1520542103.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:24.292Z,1520542104.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:24.307Z,1520542104.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:24.675Z,1520542104.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:24.718Z,1520542104.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:25.103Z,1520542105.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:25.142Z,1520542105.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:25.499Z,1520542105.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:25.515Z,1520542105.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:25.900Z,1520542105.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:25.916Z,1520542105.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:26.287Z,1520542106.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:26.307Z,1520542106.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:26.693Z,1520542106.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:26.709Z,1520542106.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:27.072Z,1520542107.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:27.111Z,1520542107.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:27.491Z,1520542107.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:27.506Z,1520542107.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:27.880Z,1520542107.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:27.913Z,1520542107.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:28.298Z,1520542108.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:28.313Z,1520542108.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:28.702Z,1520542108.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:28.722Z,1520542108.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:29.101Z,1520542109.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:29.151Z,1520542109.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:29.487Z,1520542109.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:29.518Z,1520542109.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:29.875Z,1520542109.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:29.908Z,1520542109.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:30.283Z,1520542110.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:30.330Z,1520542110.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:30.681Z,1520542110.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:30.708Z,1520542110.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:31.085Z,1520542111.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:31.127Z,1520542111.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:31.497Z,1520542111.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:31.517Z,1520542111.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:31.895Z,1520542111.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:31.926Z,1520542111.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:32.281Z,1520542112.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:32.316Z,1520542112.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:32.676Z,1520542112.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:32.722Z,1520542112.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:33.080Z,1520542113.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:33.119Z,1520542113.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:33.486Z,1520542113.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:33.514Z,1520542113.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:33.872Z,1520542113.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:33.887Z,1520542113.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:34.285Z,1520542114.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:34.315Z,1520542114.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:34.695Z,1520542114.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:34.735Z,1520542114.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:35.084Z,1520542115.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:35.107Z,1520542115.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:35.485Z,1520542115.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:35.500Z,1520542115.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:35.875Z,1520542115.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:35.902Z,1520542115.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:36.286Z,1520542116.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:36.303Z,1520542116.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:36.686Z,1520542116.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:36.707Z,1520542116.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:37.101Z,1520542117.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:37.132Z,1520542117.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:37.485Z,1520542117.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:37.530Z,1520542117.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:37.899Z,1520542117.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:37.930Z,1520542117.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:38.286Z,1520542118.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:38.306Z,1520542118.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:38.685Z,1520542118.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:38.700Z,1520542118.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:39.084Z,1520542119.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:39.126Z,1520542119.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:39.485Z,1520542119.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:39.511Z,1520542119.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:39.881Z,1520542119.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:39.896Z,1520542119.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:40.301Z,1520542120.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:40.331Z,1520542120.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:40.690Z,1520542120.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:40.709Z,1520542120.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:41.088Z,1520542121.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:41.103Z,1520542121.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:41.487Z,1520542121.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:41.503Z,1520542121.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:41.887Z,1520542121.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:41.902Z,1520542121.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:44.987Z,1520542124.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:45.002Z,1520542125.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:45.095Z,1520542125.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:45.111Z,1520542125.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:45.499Z,1520542125.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:45.515Z,1520542125.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:45.896Z,1520542125.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:45.911Z,1520542125.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:46.298Z,1520542126.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:46.318Z,1520542126.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:46.689Z,1520542126.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:46.768Z,1520542126.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:47.068Z,1520542127.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:47.110Z,1520542127.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:47.492Z,1520542127.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:47.507Z,1520542127.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:47.899Z,1520542127.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:47.914Z,1520542127.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:48.294Z,1520542128.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:48.311Z,1520542128.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:48.699Z,1520542128.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:48.746Z,1520542128.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:49.100Z,1520542129.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:49.116Z,1520542129.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:49.469Z,1520542129.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:49.498Z,1520542129.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:49.886Z,1520542129.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:49.907Z,1520542129.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:50.275Z,1520542130.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:50.316Z,1520542130.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:50.674Z,1520542130.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:50.706Z,1520542130.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:51.099Z,1520542131.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:51.115Z,1520542131.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:51.508Z,1520542131.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:51.523Z,1520542131.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:51.884Z,1520542131.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:51.920Z,1520542131.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:52.280Z,1520542132.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:52.310Z,1520542132.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:52.678Z,1520542132.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:52.715Z,1520542132.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:53.072Z,1520542133.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:53.089Z,1520542133.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:53.483Z,1520542133.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:53.519Z,1520542133.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:53.883Z,1520542133.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:53.922Z,1520542133.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:54.294Z,1520542134.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:54.317Z,1520542134.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:54.706Z,1520542134.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:54.721Z,1520542134.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:55.096Z,1520542135.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:55.130Z,1520542135.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:55.469Z,1520542135.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:55.515Z,1520542135.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:55.887Z,1520542135.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:55.922Z,1520542135.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:56.281Z,1520542136.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:56.319Z,1520542136.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:56.678Z,1520542136.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:56.726Z,1520542136.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:57.096Z,1520542137.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:57.122Z,1520542137.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:57.505Z,1520542137.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:57.521Z,1520542137.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:57.886Z,1520542137.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:57.923Z,1520542137.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:58.283Z,1520542138.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:58.326Z,1520542138.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:58.685Z,1520542138.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:58.726Z,1520542138.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:59.078Z,1520542139.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:59.102Z,1520542139.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:59.488Z,1520542139.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:59.503Z,1520542139.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:48:59.883Z,1520542139.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:48:59.930Z,1520542139.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:00.288Z,1520542140.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:00.326Z,1520542140.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:00.697Z,1520542140.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:00.728Z,1520542140.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:01.093Z,1520542141.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:01.121Z,1520542141.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:01.477Z,1520542141.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:01.511Z,1520542141.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:01.887Z,1520542141.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:01.903Z,1520542141.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:02.287Z,1520542142.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:02.303Z,1520542142.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:02.688Z,1520542142.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:02.703Z,1520542142.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:03.100Z,1520542143.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:03.130Z,1520542143.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:03.492Z,1520542143.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:03.511Z,1520542143.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:03.893Z,1520542143.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:03.909Z,1520542143.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:04.290Z,1520542144.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:04.305Z,1520542144.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:04.686Z,1520542144.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:04.707Z,1520542144.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:05.090Z,1520542145.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:05.105Z,1520542145.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:05.491Z,1520542145.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:05.511Z,1520542145.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:05.890Z,1520542145.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:05.911Z,1520542145.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:06.291Z,1520542146.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:06.310Z,1520542146.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:06.695Z,1520542146.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:06.711Z,1520542146.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:07.094Z,1520542147.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:07.109Z,1520542147.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:07.490Z,1520542147.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:07.505Z,1520542147.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:07.880Z,1520542147.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:07.930Z,1520542147.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:08.291Z,1520542148.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:08.307Z,1520542148.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:08.686Z,1520542148.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:08.702Z,1520542148.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:09.091Z,1520542149.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:09.106Z,1520542149.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:09.498Z,1520542149.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:09.514Z,1520542149.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:09.897Z,1520542149.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:09.912Z,1520542149.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:10.292Z,1520542150.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:10.311Z,1520542150.311 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:10.311Z,1520542150.311 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 261
2018-03-08T20:49:10.311Z,1520542150.311 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T20:49:10.313Z,1520542150.313 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:10.313Z,1520542150.313 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 261
2018-03-08T20:49:10.313Z,1520542150.313 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T20:49:10.315Z,1520542150.315 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:10.315Z,1520542150.315 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 261
2018-03-08T20:49:10.315Z,1520542150.315 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T20:49:10.341Z,1520542150.341 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T20:49:10.342Z,1520542150.342 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T20:49:10.342Z,1520542150.342 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T20:49:10.691Z,1520542150.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:10.718Z,1520542150.718 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T20:49:10.718Z,1520542150.718 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 261
2018-03-08T20:49:10.718Z,1520542150.718 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T20:49:10.719Z,1520542150.719 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 261
2018-03-08T20:49:10.719Z,1520542150.719 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T20:49:10.719Z,1520542150.719 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 261
2018-03-08T20:49:11.083Z,1520542151.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:11.121Z,1520542151.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T20:49:11.121Z,1520542151.121 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:49:11.122Z,1520542151.122 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:49:11.122Z,1520542151.122 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T20:49:11.122Z,1520542151.122 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:49:11.123Z,1520542151.123 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:49:11.123Z,1520542151.123 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T20:49:11.123Z,1520542151.123 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:49:11.124Z,1520542151.124 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:49:11.494Z,1520542151.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:11.526Z,1520542151.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T20:49:11.527Z,1520542151.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:11.879Z,1520542151.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:11.906Z,1520542151.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T20:49:11.907Z,1520542151.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:12.293Z,1520542152.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:12.314Z,1520542152.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T20:49:12.315Z,1520542152.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:12.697Z,1520542152.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:12.713Z,1520542152.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T20:49:12.714Z,1520542152.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:13.101Z,1520542153.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:13.117Z,1520542153.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T20:49:13.118Z,1520542153.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:13.472Z,1520542153.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:13.502Z,1520542153.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T20:49:13.503Z,1520542153.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:13.873Z,1520542153.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:13.899Z,1520542153.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T20:49:13.900Z,1520542153.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:14.275Z,1520542154.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:14.311Z,1520542154.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T20:49:14.312Z,1520542154.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:14.679Z,1520542154.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:14.741Z,1520542154.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T20:49:14.742Z,1520542154.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:15.096Z,1520542155.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:15.111Z,1520542155.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T20:49:15.112Z,1520542155.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:15.501Z,1520542155.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:15.522Z,1520542155.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T20:49:15.523Z,1520542155.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:15.902Z,1520542155.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:15.917Z,1520542155.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T20:49:15.918Z,1520542155.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:16.277Z,1520542156.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:16.308Z,1520542156.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T20:49:16.309Z,1520542156.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:16.680Z,1520542156.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:16.714Z,1520542156.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T20:49:16.715Z,1520542156.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:17.081Z,1520542157.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:17.117Z,1520542157.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T20:49:17.118Z,1520542157.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:17.478Z,1520542157.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:17.516Z,1520542157.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T20:49:17.521Z,1520542157.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:17.876Z,1520542157.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:17.927Z,1520542157.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T20:49:17.928Z,1520542157.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:18.310Z,1520542158.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:18.326Z,1520542158.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T20:49:18.326Z,1520542158.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:18.689Z,1520542158.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:18.723Z,1520542158.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T20:49:18.724Z,1520542158.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:19.106Z,1520542159.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:19.126Z,1520542159.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T20:49:19.127Z,1520542159.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:19.475Z,1520542159.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:19.521Z,1520542159.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T20:49:19.522Z,1520542159.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:19.886Z,1520542159.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:19.912Z,1520542159.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T20:49:19.913Z,1520542159.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:20.286Z,1520542160.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:20.309Z,1520542160.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T20:49:20.310Z,1520542160.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:20.682Z,1520542160.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:20.722Z,1520542160.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T20:49:20.723Z,1520542160.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:21.092Z,1520542161.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:21.119Z,1520542161.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T20:49:21.120Z,1520542161.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:21.494Z,1520542161.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:21.517Z,1520542161.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T20:49:21.518Z,1520542161.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:21.896Z,1520542161.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:21.921Z,1520542161.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T20:49:21.922Z,1520542161.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:22.283Z,1520542162.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:22.322Z,1520542162.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T20:49:22.323Z,1520542162.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:22.682Z,1520542162.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:22.722Z,1520542162.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T20:49:22.723Z,1520542162.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:23.086Z,1520542163.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:23.118Z,1520542163.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T20:49:23.119Z,1520542163.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:23.486Z,1520542163.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:23.501Z,1520542163.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T20:49:23.502Z,1520542163.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:23.883Z,1520542163.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:23.929Z,1520542163.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T20:49:23.930Z,1520542163.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:24.299Z,1520542164.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:24.327Z,1520542164.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T20:49:24.328Z,1520542164.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:24.694Z,1520542164.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:24.727Z,1520542164.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T20:49:24.728Z,1520542164.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:25.093Z,1520542165.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:25.108Z,1520542165.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T20:49:25.121Z,1520542165.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:25.479Z,1520542165.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:25.510Z,1520542165.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T20:49:25.511Z,1520542165.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:25.887Z,1520542165.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:25.904Z,1520542165.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T20:49:25.905Z,1520542165.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:26.282Z,1520542166.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:26.302Z,1520542166.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T20:49:26.303Z,1520542166.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:26.680Z,1520542166.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:26.695Z,1520542166.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T20:49:26.696Z,1520542166.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:27.090Z,1520542167.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:27.109Z,1520542167.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T20:49:27.110Z,1520542167.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:27.491Z,1520542167.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:27.514Z,1520542167.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T20:49:27.514Z,1520542167.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:27.899Z,1520542167.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:27.916Z,1520542167.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T20:49:27.917Z,1520542167.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:28.278Z,1520542168.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:28.313Z,1520542168.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T20:49:28.314Z,1520542168.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:28.674Z,1520542168.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:28.712Z,1520542168.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T20:49:28.713Z,1520542168.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:29.071Z,1520542169.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:29.101Z,1520542169.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T20:49:29.102Z,1520542169.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:29.481Z,1520542169.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:29.507Z,1520542169.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T20:49:29.509Z,1520542169.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:29.878Z,1520542169.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:29.913Z,1520542169.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T20:49:29.914Z,1520542169.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:30.290Z,1520542170.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:30.319Z,1520542170.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:30.700Z,1520542170.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:30.724Z,1520542170.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:31.100Z,1520542171.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:31.115Z,1520542171.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:31.485Z,1520542171.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:31.509Z,1520542171.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:31.880Z,1520542171.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:31.918Z,1520542171.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:32.290Z,1520542172.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:32.316Z,1520542172.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:32.682Z,1520542172.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:32.711Z,1520542172.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:33.093Z,1520542173.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:33.120Z,1520542173.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:33.508Z,1520542173.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:33.530Z,1520542173.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:33.892Z,1520542173.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:33.919Z,1520542173.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:34.277Z,1520542174.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:34.293Z,1520542174.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:34.685Z,1520542174.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:34.700Z,1520542174.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:35.082Z,1520542175.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:35.126Z,1520542175.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:35.483Z,1520542175.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:35.526Z,1520542175.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:35.883Z,1520542175.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:35.898Z,1520542175.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:36.301Z,1520542176.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:36.324Z,1520542176.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:36.695Z,1520542176.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:36.719Z,1520542176.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:37.092Z,1520542177.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:37.119Z,1520542177.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:37.481Z,1520542177.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:37.498Z,1520542177.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:37.884Z,1520542177.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:37.907Z,1520542177.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:38.285Z,1520542178.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:38.334Z,1520542178.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:38.686Z,1520542178.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:38.732Z,1520542178.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:39.088Z,1520542179.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:39.110Z,1520542179.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:39.501Z,1520542179.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:39.532Z,1520542179.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:39.895Z,1520542179.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:39.912Z,1520542179.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:40.290Z,1520542180.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:40.305Z,1520542180.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:40.682Z,1520542180.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:40.706Z,1520542180.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:41.091Z,1520542181.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:41.107Z,1520542181.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:41.110Z,1520542181.110 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T20:44:40.9Z
2018-03-08T20:49:41.110Z,1520542181.110 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T20:49:41.110Z,1520542181.110 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T20:49:41.484Z,1520542181.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:41.528Z,1520542181.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:41.982Z,1520542181.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:42.015Z,1520542182.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:42.299Z,1520542182.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:42.314Z,1520542182.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:42.723Z,1520542182.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:42.748Z,1520542182.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:47.043Z,1520542187.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:47.112Z,1520542187.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:47.196Z,1520542187.196 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0304.lzma
2018-03-08T20:49:47.243Z,1520542187.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:47.296Z,1520542187.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:47.607Z,1520542187.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:47.642Z,1520542187.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:47.975Z,1520542187.975 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0304.lzma.bak
2018-03-08T20:49:47.976Z,1520542187.976 [DataOverHttps](INFO): SBD MOMSN=7989006
2018-03-08T20:49:48.047Z,1520542188.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:48.063Z,1520542188.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:48.597Z,1520542188.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:48.612Z,1520542188.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:48.799Z,1520542188.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:48.827Z,1520542188.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:51.917Z,1520542191.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:51.955Z,1520542191.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:52.054Z,1520542192.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:52.102Z,1520542192.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:52.425Z,1520542192.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:52.454Z,1520542192.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:52.808Z,1520542192.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:52.824Z,1520542192.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:53.216Z,1520542193.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:53.232Z,1520542193.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:53.612Z,1520542193.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:53.628Z,1520542193.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:54.026Z,1520542194.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:54.057Z,1520542194.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:57.121Z,1520542197.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:57.157Z,1520542197.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:57.256Z,1520542197.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:57.290Z,1520542197.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:57.600Z,1520542197.600 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180308T074127/Express0305.lzma
2018-03-08T20:49:57.654Z,1520542197.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:57.671Z,1520542197.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:58.015Z,1520542198.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:58.043Z,1520542198.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:58.392Z,1520542198.392 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0305.lzma.bak
2018-03-08T20:49:58.392Z,1520542198.392 [DataOverHttps](INFO): SBD MOMSN=7989008
2018-03-08T20:49:58.429Z,1520542198.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:58.444Z,1520542198.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:58.000Z,1520542199.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:59.024Z,1520542199.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:59.028Z,1520542199.028 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T20:49:59.028Z,1520542199.028 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T20:49:59.028Z,1520542199.028 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T20:49:59.225Z,1520542199.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:59.241Z,1520542199.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:49:59.625Z,1520542199.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:49:59.640Z,1520542199.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:02.729Z,1520542202.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:02.745Z,1520542202.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:02.845Z,1520542202.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:02.886Z,1520542202.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:03.228Z,1520542203.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:03.245Z,1520542203.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:03.627Z,1520542203.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:03.642Z,1520542203.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:04.041Z,1520542204.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:04.064Z,1520542204.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:04.437Z,1520542204.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:04.464Z,1520542204.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:04.837Z,1520542204.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:04.874Z,1520542204.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:05.224Z,1520542205.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:05.247Z,1520542205.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:05.621Z,1520542205.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:05.653Z,1520542205.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:06.037Z,1520542206.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:06.052Z,1520542206.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:06.437Z,1520542206.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:06.453Z,1520542206.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:06.879Z,1520542206.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:06.894Z,1520542206.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:07.230Z,1520542207.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:07.245Z,1520542207.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:07.620Z,1520542207.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:07.660Z,1520542207.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:08.020Z,1520542208.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:08.042Z,1520542208.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:08.421Z,1520542208.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:08.436Z,1520542208.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:08.819Z,1520542208.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:08.838Z,1520542208.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:09.233Z,1520542209.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:09.248Z,1520542209.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:09.669Z,1520542209.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:09.691Z,1520542209.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:10.033Z,1520542210.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:10.049Z,1520542210.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:10.420Z,1520542210.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:10.435Z,1520542210.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:10.819Z,1520542210.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:10.833Z,1520542210.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:11.223Z,1520542211.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:11.239Z,1520542211.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:11.647Z,1520542211.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:11.667Z,1520542211.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:12.033Z,1520542212.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:12.078Z,1520542212.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:12.433Z,1520542212.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:12.448Z,1520542212.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:12.833Z,1520542212.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:12.849Z,1520542212.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:13.228Z,1520542213.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:13.244Z,1520542213.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:13.628Z,1520542213.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:13.643Z,1520542213.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:14.033Z,1520542214.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:14.049Z,1520542214.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:14.433Z,1520542214.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:14.448Z,1520542214.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:14.834Z,1520542214.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:14.850Z,1520542214.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:15.231Z,1520542215.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:15.246Z,1520542215.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:15.626Z,1520542215.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:15.641Z,1520542215.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:16.033Z,1520542216.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:16.049Z,1520542216.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:16.437Z,1520542216.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:16.452Z,1520542216.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:16.833Z,1520542216.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:16.854Z,1520542216.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:17.229Z,1520542217.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:17.245Z,1520542217.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:17.632Z,1520542217.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:17.647Z,1520542217.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:18.033Z,1520542218.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:18.049Z,1520542218.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:18.438Z,1520542218.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:18.453Z,1520542218.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:18.832Z,1520542218.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:18.847Z,1520542218.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:19.228Z,1520542219.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:19.243Z,1520542219.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:19.630Z,1520542219.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:19.646Z,1520542219.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:20.033Z,1520542220.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:20.049Z,1520542220.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:20.437Z,1520542220.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:20.452Z,1520542220.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:20.833Z,1520542220.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:20.849Z,1520542220.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:21.225Z,1520542221.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:21.245Z,1520542221.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:21.630Z,1520542221.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:21.645Z,1520542221.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:22.033Z,1520542222.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:22.049Z,1520542222.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:22.438Z,1520542222.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:22.455Z,1520542222.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:22.833Z,1520542222.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:22.854Z,1520542222.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:23.231Z,1520542223.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:23.251Z,1520542223.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:23.630Z,1520542223.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:23.645Z,1520542223.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:24.045Z,1520542224.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:24.083Z,1520542224.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:24.433Z,1520542224.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:24.455Z,1520542224.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:24.833Z,1520542224.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:24.849Z,1520542224.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:25.232Z,1520542225.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:25.247Z,1520542225.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:25.630Z,1520542225.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:25.645Z,1520542225.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:26.033Z,1520542226.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:26.049Z,1520542226.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:26.437Z,1520542226.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:26.452Z,1520542226.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:26.833Z,1520542226.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:26.849Z,1520542226.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:27.226Z,1520542227.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:27.254Z,1520542227.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:27.631Z,1520542227.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:27.646Z,1520542227.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:28.036Z,1520542228.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:28.052Z,1520542228.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:28.437Z,1520542228.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:28.453Z,1520542228.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:28.838Z,1520542228.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:28.853Z,1520542228.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:29.232Z,1520542229.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:29.248Z,1520542229.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:29.631Z,1520542229.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:29.646Z,1520542229.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:30.038Z,1520542230.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:30.053Z,1520542230.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:30.437Z,1520542230.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:30.453Z,1520542230.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:30.837Z,1520542230.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:30.852Z,1520542230.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:31.229Z,1520542231.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:31.244Z,1520542231.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:31.631Z,1520542231.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:31.646Z,1520542231.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:32.037Z,1520542232.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:32.053Z,1520542232.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:32.438Z,1520542232.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:32.453Z,1520542232.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:32.837Z,1520542232.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:32.853Z,1520542232.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:33.232Z,1520542233.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:33.247Z,1520542233.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:33.634Z,1520542233.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:33.649Z,1520542233.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:34.035Z,1520542234.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:34.051Z,1520542234.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:34.438Z,1520542234.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:34.455Z,1520542234.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:34.837Z,1520542234.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:34.853Z,1520542234.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:35.232Z,1520542235.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:35.247Z,1520542235.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:35.630Z,1520542235.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:35.651Z,1520542235.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:36.036Z,1520542236.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:36.054Z,1520542236.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:36.436Z,1520542236.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:36.455Z,1520542236.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:36.836Z,1520542236.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:36.852Z,1520542236.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:37.232Z,1520542237.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:37.247Z,1520542237.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:37.631Z,1520542237.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:37.651Z,1520542237.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:38.036Z,1520542238.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:38.081Z,1520542238.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:38.436Z,1520542238.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:38.451Z,1520542238.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:38.838Z,1520542238.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:38.853Z,1520542238.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:39.231Z,1520542239.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:39.247Z,1520542239.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:39.632Z,1520542239.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:39.647Z,1520542239.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:40.036Z,1520542240.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:40.051Z,1520542240.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:40.436Z,1520542240.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:40.455Z,1520542240.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:40.837Z,1520542240.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:40.852Z,1520542240.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:41.232Z,1520542241.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:41.247Z,1520542241.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:41.632Z,1520542241.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:41.655Z,1520542241.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:42.037Z,1520542242.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:42.052Z,1520542242.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:42.437Z,1520542242.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:42.453Z,1520542242.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:42.836Z,1520542242.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:42.855Z,1520542242.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:43.233Z,1520542243.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:43.248Z,1520542243.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:43.631Z,1520542243.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:43.655Z,1520542243.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:44.036Z,1520542244.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:44.055Z,1520542244.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:44.436Z,1520542244.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:44.451Z,1520542244.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:44.836Z,1520542244.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:44.880Z,1520542244.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:45.225Z,1520542245.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:45.245Z,1520542245.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:45.631Z,1520542245.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:45.646Z,1520542245.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:46.036Z,1520542246.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:46.052Z,1520542246.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:46.436Z,1520542246.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:46.452Z,1520542246.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:46.836Z,1520542246.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:46.852Z,1520542246.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:47.232Z,1520542247.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:47.248Z,1520542247.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:47.627Z,1520542247.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:47.642Z,1520542247.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:48.036Z,1520542248.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:48.052Z,1520542248.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:48.438Z,1520542248.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:48.453Z,1520542248.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:48.836Z,1520542248.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:48.862Z,1520542248.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:49.232Z,1520542249.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:49.247Z,1520542249.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:49.631Z,1520542249.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:49.651Z,1520542249.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:50.036Z,1520542250.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:50.052Z,1520542250.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:50.437Z,1520542250.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:50.452Z,1520542250.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:50.836Z,1520542250.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:50.855Z,1520542250.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:51.236Z,1520542251.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:51.251Z,1520542251.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:51.631Z,1520542251.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:51.646Z,1520542251.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:52.037Z,1520542252.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:52.052Z,1520542252.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:52.437Z,1520542252.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:52.453Z,1520542252.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:52.837Z,1520542252.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:52.852Z,1520542252.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:53.233Z,1520542253.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:53.249Z,1520542253.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:53.627Z,1520542253.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:53.642Z,1520542253.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:54.040Z,1520542254.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:54.069Z,1520542254.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:54.437Z,1520542254.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:54.468Z,1520542254.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:54.833Z,1520542254.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:54.848Z,1520542254.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:55.224Z,1520542255.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:55.239Z,1520542255.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:55.624Z,1520542255.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:55.639Z,1520542255.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:56.041Z,1520542256.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:56.071Z,1520542256.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:56.437Z,1520542256.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:56.452Z,1520542256.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:56.837Z,1520542256.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:56.869Z,1520542256.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:57.229Z,1520542257.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:57.245Z,1520542257.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:57.628Z,1520542257.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:57.643Z,1520542257.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:58.029Z,1520542258.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:58.045Z,1520542258.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:58.441Z,1520542258.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:58.472Z,1520542258.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:58.834Z,1520542258.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:58.849Z,1520542258.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:59.226Z,1520542259.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:59.242Z,1520542259.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:50:59.631Z,1520542259.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:50:59.646Z,1520542259.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:02.736Z,1520542262.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:02.752Z,1520542262.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:02.866Z,1520542262.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:02.906Z,1520542262.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:03.250Z,1520542263.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:03.281Z,1520542263.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:03.637Z,1520542263.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:03.653Z,1520542263.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:04.032Z,1520542264.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:04.047Z,1520542264.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:04.436Z,1520542264.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:04.455Z,1520542264.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:04.840Z,1520542264.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:04.855Z,1520542264.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:05.237Z,1520542265.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:05.253Z,1520542265.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:05.653Z,1520542265.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:05.675Z,1520542265.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:06.053Z,1520542266.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:06.074Z,1520542266.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:06.440Z,1520542266.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:06.455Z,1520542266.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:06.840Z,1520542266.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:06.879Z,1520542266.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:07.240Z,1520542267.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:07.255Z,1520542267.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:07.636Z,1520542267.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:07.651Z,1520542267.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:08.053Z,1520542268.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:08.083Z,1520542268.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:08.449Z,1520542268.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:08.464Z,1520542268.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:08.842Z,1520542268.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:08.857Z,1520542268.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:09.241Z,1520542269.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:09.256Z,1520542269.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:09.641Z,1520542269.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:09.656Z,1520542269.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:10.053Z,1520542270.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:10.085Z,1520542270.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:10.445Z,1520542270.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:10.466Z,1520542270.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:10.845Z,1520542270.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:10.866Z,1520542270.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:11.239Z,1520542271.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:11.254Z,1520542271.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:11.642Z,1520542271.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:11.658Z,1520542271.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:12.045Z,1520542272.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:12.060Z,1520542272.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:12.450Z,1520542272.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:12.465Z,1520542272.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:12.854Z,1520542272.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:12.869Z,1520542272.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:13.246Z,1520542273.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:13.261Z,1520542273.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:13.644Z,1520542273.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:13.663Z,1520542273.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:14.049Z,1520542274.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:14.064Z,1520542274.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:14.450Z,1520542274.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:14.465Z,1520542274.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:14.845Z,1520542274.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:14.861Z,1520542274.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:15.240Z,1520542275.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:15.256Z,1520542275.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:15.639Z,1520542275.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:15.655Z,1520542275.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:16.049Z,1520542276.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:16.065Z,1520542276.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:16.448Z,1520542276.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:16.464Z,1520542276.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:16.849Z,1520542276.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:16.864Z,1520542276.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:17.244Z,1520542277.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:17.260Z,1520542277.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:17.642Z,1520542277.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:17.658Z,1520542277.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:18.048Z,1520542278.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:18.064Z,1520542278.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:18.448Z,1520542278.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:18.463Z,1520542278.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:18.848Z,1520542278.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:18.863Z,1520542278.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:19.245Z,1520542279.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:19.261Z,1520542279.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:19.643Z,1520542279.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:19.662Z,1520542279.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:20.048Z,1520542280.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:20.064Z,1520542280.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:20.448Z,1520542280.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:20.463Z,1520542280.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:20.848Z,1520542280.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:20.870Z,1520542280.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:21.243Z,1520542281.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:21.260Z,1520542281.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:21.639Z,1520542281.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:21.654Z,1520542281.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:22.044Z,1520542282.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:22.063Z,1520542282.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:22.448Z,1520542282.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:22.470Z,1520542282.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:22.849Z,1520542282.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:22.864Z,1520542282.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:23.244Z,1520542283.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:23.260Z,1520542283.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:23.639Z,1520542283.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:23.654Z,1520542283.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:24.050Z,1520542284.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:24.070Z,1520542284.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:24.449Z,1520542284.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:24.464Z,1520542284.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:24.849Z,1520542284.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:24.864Z,1520542284.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:25.245Z,1520542285.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:25.260Z,1520542285.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:25.643Z,1520542285.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:25.662Z,1520542285.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:26.048Z,1520542286.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:26.064Z,1520542286.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:26.448Z,1520542286.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:26.463Z,1520542286.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:26.849Z,1520542286.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:26.864Z,1520542286.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:27.239Z,1520542287.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:27.255Z,1520542287.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:27.639Z,1520542287.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:27.655Z,1520542287.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:28.044Z,1520542288.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:28.060Z,1520542288.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:28.449Z,1520542288.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:28.465Z,1520542288.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:28.849Z,1520542288.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:28.864Z,1520542288.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:29.244Z,1520542289.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:29.259Z,1520542289.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:29.639Z,1520542289.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:29.654Z,1520542289.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:30.048Z,1520542290.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:30.070Z,1520542290.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:30.443Z,1520542290.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:30.463Z,1520542290.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:30.848Z,1520542290.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:30.864Z,1520542290.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:31.244Z,1520542291.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:31.259Z,1520542291.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:31.643Z,1520542291.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:31.666Z,1520542291.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:32.048Z,1520542292.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:32.070Z,1520542292.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:32.449Z,1520542292.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:32.470Z,1520542292.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:32.848Z,1520542292.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:32.863Z,1520542292.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:33.244Z,1520542293.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:33.260Z,1520542293.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:33.637Z,1520542293.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:33.665Z,1520542293.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:34.048Z,1520542294.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:34.064Z,1520542294.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:34.452Z,1520542294.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:34.468Z,1520542294.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:34.853Z,1520542294.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:34.868Z,1520542294.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:35.244Z,1520542295.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:35.260Z,1520542295.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:35.639Z,1520542295.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:35.655Z,1520542295.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:36.058Z,1520542296.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:36.073Z,1520542296.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:36.445Z,1520542296.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:36.461Z,1520542296.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:36.853Z,1520542296.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:36.868Z,1520542296.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:37.241Z,1520542297.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:37.257Z,1520542297.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:37.644Z,1520542297.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:37.667Z,1520542297.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:38.049Z,1520542298.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:38.070Z,1520542298.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:38.454Z,1520542298.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:38.474Z,1520542298.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:38.852Z,1520542298.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:38.867Z,1520542298.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:39.245Z,1520542299.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:39.260Z,1520542299.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:39.637Z,1520542299.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:39.666Z,1520542299.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:40.046Z,1520542300.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:40.078Z,1520542300.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:40.458Z,1520542300.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:40.473Z,1520542300.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:40.857Z,1520542300.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:40.878Z,1520542300.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:41.242Z,1520542301.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:41.258Z,1520542301.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:41.632Z,1520542301.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:41.667Z,1520542301.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:42.032Z,1520542302.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:42.067Z,1520542302.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:42.442Z,1520542302.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:42.466Z,1520542302.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:42.831Z,1520542302.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:42.866Z,1520542302.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:43.257Z,1520542303.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:43.281Z,1520542303.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:43.645Z,1520542303.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:43.671Z,1520542303.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:44.049Z,1520542304.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:44.076Z,1520542304.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:44.431Z,1520542304.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:44.450Z,1520542304.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:44.842Z,1520542304.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:44.865Z,1520542304.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:45.244Z,1520542305.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:45.283Z,1520542305.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:45.643Z,1520542305.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:45.688Z,1520542305.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:46.041Z,1520542306.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:46.057Z,1520542306.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:46.457Z,1520542306.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:46.486Z,1520542306.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:46.849Z,1520542306.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:46.882Z,1520542306.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:47.239Z,1520542307.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:47.255Z,1520542307.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:47.635Z,1520542307.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:47.655Z,1520542307.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:48.053Z,1520542308.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:48.085Z,1520542308.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:48.449Z,1520542308.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:48.470Z,1520542308.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:48.849Z,1520542308.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:48.865Z,1520542308.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:49.241Z,1520542309.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:49.257Z,1520542309.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:49.635Z,1520542309.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:49.666Z,1520542309.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:50.050Z,1520542310.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:50.070Z,1520542310.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:50.449Z,1520542310.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:50.470Z,1520542310.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:50.848Z,1520542310.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:50.871Z,1520542310.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:51.245Z,1520542311.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:51.266Z,1520542311.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:51.644Z,1520542311.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:51.660Z,1520542311.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:52.047Z,1520542312.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:52.062Z,1520542312.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:52.450Z,1520542312.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:52.470Z,1520542312.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:52.849Z,1520542312.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:52.864Z,1520542312.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:53.245Z,1520542313.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:53.261Z,1520542313.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:53.639Z,1520542313.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:53.659Z,1520542313.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:54.049Z,1520542314.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:54.070Z,1520542314.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:54.450Z,1520542314.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:54.470Z,1520542314.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:54.848Z,1520542314.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:54.870Z,1520542314.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:55.244Z,1520542315.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:55.260Z,1520542315.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:55.631Z,1520542315.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:55.653Z,1520542315.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:56.048Z,1520542316.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:56.071Z,1520542316.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:56.448Z,1520542316.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:56.463Z,1520542316.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:56.848Z,1520542316.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:56.864Z,1520542316.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:57.243Z,1520542317.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:57.259Z,1520542317.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:57.640Z,1520542317.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:57.655Z,1520542317.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:58.048Z,1520542318.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:58.070Z,1520542318.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:58.450Z,1520542318.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:58.538Z,1520542318.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:58.849Z,1520542318.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:58.864Z,1520542318.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:59.244Z,1520542319.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:59.259Z,1520542319.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:59.643Z,1520542319.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:51:59.658Z,1520542319.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:51:59.672Z,1520542319.672 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T20:52:02.947Z,1520542322.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:02.962Z,1520542322.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:03.065Z,1520542323.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:03.096Z,1520542323.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:03.442Z,1520542323.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:03.475Z,1520542323.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:03.815Z,1520542323.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:03.851Z,1520542323.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:04.212Z,1520542324.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:04.227Z,1520542324.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:04.614Z,1520542324.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:04.630Z,1520542324.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:05.033Z,1520542325.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:05.060Z,1520542325.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:05.433Z,1520542325.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:05.463Z,1520542325.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:05.829Z,1520542325.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:05.851Z,1520542325.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:06.218Z,1520542326.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:06.233Z,1520542326.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:06.616Z,1520542326.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:06.631Z,1520542326.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:07.025Z,1520542327.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:07.041Z,1520542327.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:07.434Z,1520542327.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:07.465Z,1520542327.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:07.825Z,1520542327.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:07.841Z,1520542327.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:08.223Z,1520542328.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:08.242Z,1520542328.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:08.619Z,1520542328.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:08.647Z,1520542328.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:09.028Z,1520542329.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:09.044Z,1520542329.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:09.429Z,1520542329.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:09.445Z,1520542329.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:09.830Z,1520542329.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:09.845Z,1520542329.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:10.225Z,1520542330.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:10.241Z,1520542330.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:10.619Z,1520542330.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:10.638Z,1520542330.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:11.029Z,1520542331.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:11.045Z,1520542331.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:11.429Z,1520542331.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:11.450Z,1520542331.450 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:11.451Z,1520542331.451 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 262
2018-03-08T20:52:11.451Z,1520542331.451 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T20:52:11.453Z,1520542331.453 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:11.453Z,1520542331.453 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 262
2018-03-08T20:52:11.454Z,1520542331.454 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T20:52:11.455Z,1520542331.455 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:11.455Z,1520542331.455 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 262
2018-03-08T20:52:11.455Z,1520542331.455 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T20:52:11.491Z,1520542331.491 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T20:52:11.492Z,1520542331.492 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T20:52:11.492Z,1520542331.492 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T20:52:11.825Z,1520542331.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:11.873Z,1520542331.873 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T20:52:11.873Z,1520542331.873 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 262
2018-03-08T20:52:11.873Z,1520542331.873 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T20:52:11.873Z,1520542331.873 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 262
2018-03-08T20:52:11.874Z,1520542331.874 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T20:52:11.874Z,1520542331.874 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 262
2018-03-08T20:52:12.212Z,1520542332.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:12.248Z,1520542332.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T20:52:12.249Z,1520542332.249 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:52:12.249Z,1520542332.249 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:52:12.250Z,1520542332.250 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T20:52:12.250Z,1520542332.250 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:52:12.250Z,1520542332.250 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:52:12.251Z,1520542332.251 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T20:52:12.251Z,1520542332.251 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:52:12.251Z,1520542332.251 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:52:12.611Z,1520542332.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:12.642Z,1520542332.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T20:52:12.643Z,1520542332.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:13.029Z,1520542333.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:13.044Z,1520542333.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T20:52:13.045Z,1520542333.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:13.429Z,1520542333.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:13.444Z,1520542333.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T20:52:13.445Z,1520542333.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:13.821Z,1520542333.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:13.843Z,1520542333.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T20:52:13.844Z,1520542333.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:14.211Z,1520542334.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:14.246Z,1520542334.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T20:52:14.247Z,1520542334.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:14.614Z,1520542334.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:14.641Z,1520542334.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T20:52:14.642Z,1520542334.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:15.034Z,1520542335.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:15.049Z,1520542335.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T20:52:15.050Z,1520542335.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:15.431Z,1520542335.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:15.451Z,1520542335.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T20:52:15.451Z,1520542335.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:15.833Z,1520542335.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:15.847Z,1520542335.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T20:52:15.848Z,1520542335.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:16.211Z,1520542336.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:16.242Z,1520542336.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T20:52:16.243Z,1520542336.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:16.610Z,1520542336.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:16.642Z,1520542336.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T20:52:16.643Z,1520542336.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:17.025Z,1520542337.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:17.078Z,1520542337.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T20:52:17.079Z,1520542337.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:17.437Z,1520542337.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:17.452Z,1520542337.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T20:52:17.453Z,1520542337.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:17.837Z,1520542337.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:17.852Z,1520542337.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T20:52:17.853Z,1520542337.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:18.215Z,1520542338.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:18.243Z,1520542338.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T20:52:18.244Z,1520542338.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:18.615Z,1520542338.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:18.641Z,1520542338.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T20:52:18.641Z,1520542338.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:19.026Z,1520542339.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:19.049Z,1520542339.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T20:52:19.050Z,1520542339.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:19.433Z,1520542339.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:19.448Z,1520542339.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T20:52:19.449Z,1520542339.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:19.829Z,1520542339.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:19.848Z,1520542339.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T20:52:19.849Z,1520542339.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:20.211Z,1520542340.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:20.242Z,1520542340.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T20:52:20.243Z,1520542340.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:20.615Z,1520542340.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:20.647Z,1520542340.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T20:52:20.648Z,1520542340.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:21.033Z,1520542341.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:21.049Z,1520542341.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T20:52:21.050Z,1520542341.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:21.433Z,1520542341.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:21.452Z,1520542341.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T20:52:21.453Z,1520542341.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:21.835Z,1520542341.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:21.849Z,1520542341.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T20:52:21.850Z,1520542341.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:22.231Z,1520542342.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:22.246Z,1520542342.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T20:52:22.247Z,1520542342.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:22.610Z,1520542342.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:22.646Z,1520542342.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T20:52:22.647Z,1520542342.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:23.034Z,1520542343.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:23.049Z,1520542343.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T20:52:23.050Z,1520542343.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:23.434Z,1520542343.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:23.449Z,1520542343.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T20:52:23.450Z,1520542343.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:23.822Z,1520542343.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:23.858Z,1520542343.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T20:52:23.859Z,1520542343.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:24.211Z,1520542344.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:24.247Z,1520542344.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T20:52:24.248Z,1520542344.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:24.615Z,1520542344.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:24.646Z,1520542344.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T20:52:24.647Z,1520542344.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:25.021Z,1520542345.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:25.058Z,1520542345.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T20:52:25.059Z,1520542345.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:25.438Z,1520542345.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:25.453Z,1520542345.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T20:52:25.454Z,1520542345.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:25.825Z,1520542345.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:25.858Z,1520542345.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T20:52:25.859Z,1520542345.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:26.213Z,1520542346.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:26.228Z,1520542346.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T20:52:26.245Z,1520542346.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:26.615Z,1520542346.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:26.630Z,1520542346.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T20:52:26.631Z,1520542346.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:27.025Z,1520542347.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:27.051Z,1520542347.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T20:52:27.052Z,1520542347.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:27.441Z,1520542347.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:27.456Z,1520542347.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T20:52:27.457Z,1520542347.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:27.824Z,1520542347.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:27.855Z,1520542347.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T20:52:27.856Z,1520542347.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:28.214Z,1520542348.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:28.256Z,1520542348.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T20:52:28.258Z,1520542348.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:28.619Z,1520542348.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:28.654Z,1520542348.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T20:52:28.655Z,1520542348.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:29.025Z,1520542349.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:29.053Z,1520542349.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T20:52:29.054Z,1520542349.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:29.429Z,1520542349.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:29.455Z,1520542349.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T20:52:29.456Z,1520542349.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:29.829Z,1520542349.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:29.855Z,1520542349.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T20:52:29.856Z,1520542349.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:30.211Z,1520542350.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:30.230Z,1520542350.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T20:52:30.231Z,1520542350.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:30.615Z,1520542350.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:30.651Z,1520542350.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T20:52:30.652Z,1520542350.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:31.029Z,1520542351.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:31.058Z,1520542351.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T20:52:31.059Z,1520542351.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:31.429Z,1520542351.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:31.454Z,1520542351.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:31.829Z,1520542351.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:31.853Z,1520542351.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:32.217Z,1520542352.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:32.254Z,1520542352.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:32.618Z,1520542352.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:32.633Z,1520542352.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:33.033Z,1520542353.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:33.055Z,1520542353.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:33.430Z,1520542353.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:33.460Z,1520542353.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:33.833Z,1520542353.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:33.857Z,1520542353.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:34.217Z,1520542354.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:34.233Z,1520542354.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:34.616Z,1520542354.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:34.639Z,1520542354.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:35.033Z,1520542355.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:35.066Z,1520542355.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:35.434Z,1520542355.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:35.469Z,1520542355.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:35.822Z,1520542355.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:35.837Z,1520542355.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:36.221Z,1520542356.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:36.236Z,1520542356.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:36.619Z,1520542356.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:36.635Z,1520542356.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:37.030Z,1520542357.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:37.045Z,1520542357.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:37.430Z,1520542357.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:37.446Z,1520542357.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:37.833Z,1520542357.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:37.854Z,1520542357.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:38.211Z,1520542358.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:38.244Z,1520542358.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:38.611Z,1520542358.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:38.643Z,1520542358.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:39.033Z,1520542359.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:39.049Z,1520542359.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:39.431Z,1520542359.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:39.451Z,1520542359.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:39.830Z,1520542359.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:39.845Z,1520542359.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:40.210Z,1520542360.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:40.247Z,1520542360.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:40.614Z,1520542360.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:40.646Z,1520542360.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:41.039Z,1520542361.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:41.054Z,1520542361.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:41.433Z,1520542361.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:41.458Z,1520542361.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:41.833Z,1520542361.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:41.857Z,1520542361.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:42.217Z,1520542362.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:42.232Z,1520542362.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:42.616Z,1520542362.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:42.631Z,1520542362.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:43.025Z,1520542363.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:43.041Z,1520542363.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:43.433Z,1520542363.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:43.448Z,1520542363.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:43.825Z,1520542363.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:43.841Z,1520542363.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:44.219Z,1520542364.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:44.234Z,1520542364.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:44.621Z,1520542364.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:44.636Z,1520542364.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:45.022Z,1520542365.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:45.037Z,1520542365.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:45.425Z,1520542365.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:45.440Z,1520542365.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:45.833Z,1520542365.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:45.848Z,1520542365.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:46.220Z,1520542366.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:46.235Z,1520542366.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:46.614Z,1520542366.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:46.637Z,1520542366.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:47.025Z,1520542367.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:47.041Z,1520542367.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:47.422Z,1520542367.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:47.437Z,1520542367.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:47.826Z,1520542367.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:47.841Z,1520542367.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:48.223Z,1520542368.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:48.238Z,1520542368.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:48.612Z,1520542368.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:48.643Z,1520542368.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:49.026Z,1520542369.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:49.041Z,1520542369.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:49.424Z,1520542369.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:49.439Z,1520542369.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:49.825Z,1520542369.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:49.841Z,1520542369.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:50.222Z,1520542370.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:50.238Z,1520542370.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:50.622Z,1520542370.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:50.637Z,1520542370.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:51.024Z,1520542371.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:51.039Z,1520542371.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:51.425Z,1520542371.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:51.440Z,1520542371.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:51.825Z,1520542371.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:51.846Z,1520542371.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:52.219Z,1520542372.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:52.235Z,1520542372.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:52.615Z,1520542372.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:52.637Z,1520542372.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:53.028Z,1520542373.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:53.050Z,1520542373.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:53.429Z,1520542373.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:53.450Z,1520542373.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:53.832Z,1520542373.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:53.847Z,1520542373.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:54.220Z,1520542374.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:54.235Z,1520542374.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:54.608Z,1520542374.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:54.644Z,1520542374.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:55.029Z,1520542375.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:55.044Z,1520542375.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:55.430Z,1520542375.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:55.445Z,1520542375.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:55.828Z,1520542375.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:55.844Z,1520542375.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:56.217Z,1520542376.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:56.238Z,1520542376.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:56.619Z,1520542376.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:56.645Z,1520542376.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:57.028Z,1520542377.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:57.044Z,1520542377.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:57.432Z,1520542377.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:57.447Z,1520542377.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:57.833Z,1520542377.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:57.854Z,1520542377.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:58.224Z,1520542378.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:58.239Z,1520542378.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:58.615Z,1520542378.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:58.637Z,1520542378.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:59.032Z,1520542379.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:59.054Z,1520542379.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:59.430Z,1520542379.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:59.450Z,1520542379.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:52:59.833Z,1520542379.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:52:59.848Z,1520542379.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:02.940Z,1520542382.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:02.955Z,1520542382.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:03.050Z,1520542383.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:03.080Z,1520542383.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:03.454Z,1520542383.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:03.477Z,1520542383.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:03.849Z,1520542383.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:03.886Z,1520542383.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:04.249Z,1520542384.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:04.285Z,1520542384.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:04.640Z,1520542384.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:04.655Z,1520542384.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:05.038Z,1520542385.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:05.053Z,1520542385.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:05.440Z,1520542385.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:05.455Z,1520542385.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:05.838Z,1520542385.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:05.853Z,1520542385.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:06.246Z,1520542386.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:06.261Z,1520542386.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:06.641Z,1520542386.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:06.656Z,1520542386.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:07.053Z,1520542387.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:07.068Z,1520542387.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:07.442Z,1520542387.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:07.457Z,1520542387.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:07.836Z,1520542387.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:07.858Z,1520542387.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:08.238Z,1520542388.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:08.265Z,1520542388.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:08.643Z,1520542388.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:08.662Z,1520542388.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:09.041Z,1520542389.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:09.068Z,1520542389.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:09.455Z,1520542389.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:09.475Z,1520542389.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:09.853Z,1520542389.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:09.869Z,1520542389.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:10.244Z,1520542390.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:10.259Z,1520542390.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:10.650Z,1520542390.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:10.671Z,1520542390.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:11.057Z,1520542391.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:11.074Z,1520542391.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:11.449Z,1520542391.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:11.465Z,1520542391.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:11.849Z,1520542391.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:11.864Z,1520542391.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:12.244Z,1520542392.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:12.259Z,1520542392.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:12.628Z,1520542392.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:12.662Z,1520542392.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:13.050Z,1520542393.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:13.065Z,1520542393.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:13.454Z,1520542393.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:13.469Z,1520542393.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:13.854Z,1520542393.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:13.874Z,1520542393.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:14.243Z,1520542394.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:14.259Z,1520542394.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:14.631Z,1520542394.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:14.668Z,1520542394.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:15.050Z,1520542395.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:15.066Z,1520542395.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:15.453Z,1520542395.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:15.474Z,1520542395.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:15.854Z,1520542395.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:15.869Z,1520542395.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:16.227Z,1520542396.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:16.259Z,1520542396.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:16.631Z,1520542396.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:16.667Z,1520542396.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:17.054Z,1520542397.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:17.075Z,1520542397.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:17.445Z,1520542397.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:17.464Z,1520542397.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:17.851Z,1520542397.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:17.866Z,1520542397.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:18.232Z,1520542398.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:18.259Z,1520542398.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:18.628Z,1520542398.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:18.666Z,1520542398.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:19.053Z,1520542399.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:19.069Z,1520542399.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:19.449Z,1520542399.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:19.464Z,1520542399.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:19.854Z,1520542399.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:19.870Z,1520542399.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:20.231Z,1520542400.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:20.257Z,1520542400.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:20.631Z,1520542400.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:20.666Z,1520542400.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:21.049Z,1520542401.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:21.065Z,1520542401.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:21.453Z,1520542401.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:21.468Z,1520542401.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:21.851Z,1520542401.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:21.875Z,1520542401.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:22.239Z,1520542402.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:22.268Z,1520542402.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:22.639Z,1520542402.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:22.669Z,1520542402.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:23.060Z,1520542403.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:23.081Z,1520542403.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:23.441Z,1520542403.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:23.463Z,1520542403.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:23.855Z,1520542403.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:23.871Z,1520542403.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:24.237Z,1520542404.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:24.264Z,1520542404.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:24.633Z,1520542404.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:24.649Z,1520542404.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:25.049Z,1520542405.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:25.078Z,1520542405.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:25.453Z,1520542405.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:25.486Z,1520542405.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:25.849Z,1520542405.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:25.874Z,1520542405.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:26.235Z,1520542406.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:26.251Z,1520542406.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:26.639Z,1520542406.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:26.658Z,1520542406.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:27.037Z,1520542407.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:27.053Z,1520542407.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:27.449Z,1520542407.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:27.477Z,1520542407.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:27.853Z,1520542407.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:27.890Z,1520542407.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:28.241Z,1520542408.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:28.285Z,1520542408.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:28.636Z,1520542408.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:28.660Z,1520542408.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:29.053Z,1520542409.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:29.090Z,1520542409.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:29.453Z,1520542409.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:29.502Z,1520542409.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:29.854Z,1520542409.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:29.883Z,1520542409.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:30.242Z,1520542410.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:30.258Z,1520542410.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:30.631Z,1520542410.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:30.659Z,1520542410.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:31.053Z,1520542411.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:31.092Z,1520542411.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:31.445Z,1520542411.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:31.460Z,1520542411.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:31.845Z,1520542411.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:31.860Z,1520542411.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:32.244Z,1520542412.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:32.260Z,1520542412.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:32.643Z,1520542412.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:32.658Z,1520542412.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:33.045Z,1520542413.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:33.062Z,1520542413.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:33.445Z,1520542413.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:33.460Z,1520542413.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:33.845Z,1520542413.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:33.860Z,1520542413.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:34.251Z,1520542414.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:34.267Z,1520542414.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:34.642Z,1520542414.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:34.665Z,1520542414.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:35.049Z,1520542415.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:35.070Z,1520542415.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:35.445Z,1520542415.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:35.467Z,1520542415.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:35.849Z,1520542415.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:35.864Z,1520542415.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:36.227Z,1520542416.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:36.254Z,1520542416.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:36.628Z,1520542416.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:36.663Z,1520542416.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:37.053Z,1520542417.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:37.068Z,1520542417.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:37.452Z,1520542417.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:37.467Z,1520542417.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:37.852Z,1520542417.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:37.873Z,1520542417.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:38.244Z,1520542418.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:38.259Z,1520542418.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:38.627Z,1520542418.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:38.666Z,1520542418.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:39.049Z,1520542419.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:39.065Z,1520542419.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:39.452Z,1520542419.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:39.472Z,1520542419.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:39.853Z,1520542419.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:39.868Z,1520542419.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:40.244Z,1520542420.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:40.259Z,1520542420.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:40.639Z,1520542420.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:40.658Z,1520542420.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:41.050Z,1520542421.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:41.071Z,1520542421.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:41.448Z,1520542421.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:41.463Z,1520542421.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:41.857Z,1520542421.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:41.909Z,1520542421.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:42.231Z,1520542422.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:42.263Z,1520542422.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:42.629Z,1520542422.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:42.682Z,1520542422.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:43.051Z,1520542423.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:43.084Z,1520542423.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:43.451Z,1520542423.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:43.493Z,1520542423.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:43.850Z,1520542423.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:43.888Z,1520542423.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:44.248Z,1520542424.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:44.286Z,1520542424.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:44.641Z,1520542424.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:44.687Z,1520542424.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:45.041Z,1520542425.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:45.060Z,1520542425.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:45.447Z,1520542425.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:45.498Z,1520542425.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:45.847Z,1520542425.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:45.903Z,1520542425.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:46.239Z,1520542426.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:46.254Z,1520542426.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:46.643Z,1520542426.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:46.658Z,1520542426.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:47.045Z,1520542427.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:47.060Z,1520542427.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:47.444Z,1520542427.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:47.459Z,1520542427.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:47.845Z,1520542427.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:47.861Z,1520542427.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:48.240Z,1520542428.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:48.255Z,1520542428.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:48.631Z,1520542428.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:48.650Z,1520542428.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:49.048Z,1520542429.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:49.067Z,1520542429.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:49.449Z,1520542429.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:49.470Z,1520542429.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:49.848Z,1520542429.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:49.863Z,1520542429.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:50.244Z,1520542430.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:50.259Z,1520542430.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:50.644Z,1520542430.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:50.671Z,1520542430.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:51.045Z,1520542431.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:51.060Z,1520542431.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:51.449Z,1520542431.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:51.464Z,1520542431.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:51.849Z,1520542431.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:51.897Z,1520542431.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:52.245Z,1520542432.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:52.260Z,1520542432.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:52.640Z,1520542432.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:52.662Z,1520542432.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:53.057Z,1520542433.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:53.073Z,1520542433.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:53.446Z,1520542433.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:53.474Z,1520542433.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:53.849Z,1520542433.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:53.883Z,1520542433.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:54.235Z,1520542434.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:54.267Z,1520542434.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:54.629Z,1520542434.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:54.664Z,1520542434.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:55.054Z,1520542435.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:55.069Z,1520542435.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:55.451Z,1520542435.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:55.492Z,1520542435.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:55.853Z,1520542435.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:55.874Z,1520542435.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:56.232Z,1520542436.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:56.267Z,1520542436.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:56.635Z,1520542436.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:56.675Z,1520542436.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:57.045Z,1520542437.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:57.077Z,1520542437.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:57.445Z,1520542437.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:57.471Z,1520542437.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:57.845Z,1520542437.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:57.889Z,1520542437.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:58.238Z,1520542438.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:58.253Z,1520542438.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:58.638Z,1520542438.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:58.654Z,1520542438.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:59.057Z,1520542439.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:59.082Z,1520542439.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:59.449Z,1520542439.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:59.464Z,1520542439.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:53:59.853Z,1520542439.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:53:59.891Z,1520542439.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:00.241Z,1520542440.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:00.257Z,1520542440.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:03.337Z,1520542443.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:03.358Z,1520542443.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:03.475Z,1520542443.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:03.500Z,1520542443.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:03.849Z,1520542443.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:03.889Z,1520542443.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:04.245Z,1520542444.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:04.261Z,1520542444.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:04.647Z,1520542444.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:04.662Z,1520542444.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:05.033Z,1520542445.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:05.082Z,1520542445.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:05.444Z,1520542445.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:05.459Z,1520542445.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:05.830Z,1520542445.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:05.864Z,1520542445.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:06.251Z,1520542446.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:06.266Z,1520542446.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:06.656Z,1520542446.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:06.676Z,1520542446.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:07.054Z,1520542447.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:07.074Z,1520542447.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:07.445Z,1520542447.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:07.460Z,1520542447.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:07.827Z,1520542447.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:07.864Z,1520542447.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:08.246Z,1520542448.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:08.272Z,1520542448.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:08.645Z,1520542448.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:08.660Z,1520542448.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:09.046Z,1520542449.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:09.061Z,1520542449.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:09.454Z,1520542449.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:09.479Z,1520542449.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:09.858Z,1520542449.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:09.878Z,1520542449.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:10.231Z,1520542450.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:10.263Z,1520542450.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:10.631Z,1520542450.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:10.657Z,1520542450.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:11.031Z,1520542451.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:11.059Z,1520542451.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:11.428Z,1520542451.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:11.465Z,1520542451.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:11.831Z,1520542451.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:11.857Z,1520542451.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:12.248Z,1520542452.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:12.272Z,1520542452.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:12.657Z,1520542452.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:12.675Z,1520542452.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:13.053Z,1520542453.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:13.074Z,1520542453.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:13.427Z,1520542453.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:13.459Z,1520542453.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:13.831Z,1520542453.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:13.857Z,1520542453.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:14.231Z,1520542454.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:14.258Z,1520542454.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:14.631Z,1520542454.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:14.659Z,1520542454.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:15.037Z,1520542455.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:15.072Z,1520542455.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:15.457Z,1520542455.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:15.472Z,1520542455.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:15.853Z,1520542455.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:15.868Z,1520542455.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:16.238Z,1520542456.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:16.269Z,1520542456.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:16.630Z,1520542456.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:16.667Z,1520542456.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:17.055Z,1520542457.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:17.070Z,1520542457.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:17.458Z,1520542457.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:17.476Z,1520542457.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:17.853Z,1520542457.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:17.873Z,1520542457.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:18.227Z,1520542458.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:18.267Z,1520542458.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:18.634Z,1520542458.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:18.667Z,1520542458.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:19.041Z,1520542459.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:19.086Z,1520542459.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:19.459Z,1520542459.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:19.479Z,1520542459.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:19.845Z,1520542459.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:19.871Z,1520542459.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:20.239Z,1520542460.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:20.270Z,1520542460.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:20.638Z,1520542460.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:20.669Z,1520542460.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:21.058Z,1520542461.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:21.078Z,1520542461.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:21.462Z,1520542461.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:21.477Z,1520542461.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:21.845Z,1520542461.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:21.878Z,1520542461.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:22.235Z,1520542462.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:22.267Z,1520542462.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:22.634Z,1520542462.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:22.650Z,1520542462.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:23.053Z,1520542463.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:23.079Z,1520542463.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:23.441Z,1520542463.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:23.473Z,1520542463.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:23.849Z,1520542463.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:23.883Z,1520542463.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:24.236Z,1520542464.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:24.251Z,1520542464.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:24.638Z,1520542464.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:24.659Z,1520542464.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:25.041Z,1520542465.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:25.057Z,1520542465.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:25.453Z,1520542465.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:25.468Z,1520542465.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:25.853Z,1520542465.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:25.889Z,1520542465.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:26.238Z,1520542466.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:26.257Z,1520542466.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:26.639Z,1520542466.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:26.654Z,1520542466.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:27.053Z,1520542467.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:27.088Z,1520542467.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:27.449Z,1520542467.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:27.468Z,1520542467.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:27.849Z,1520542467.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:27.870Z,1520542467.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:28.242Z,1520542468.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:28.263Z,1520542468.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:28.643Z,1520542468.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:28.658Z,1520542468.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:29.049Z,1520542469.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:29.069Z,1520542469.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:29.449Z,1520542469.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:29.464Z,1520542469.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:29.849Z,1520542469.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:29.864Z,1520542469.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:30.244Z,1520542470.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:30.259Z,1520542470.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:30.641Z,1520542470.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:30.656Z,1520542470.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:31.050Z,1520542471.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:31.065Z,1520542471.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:31.449Z,1520542471.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:31.464Z,1520542471.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:31.849Z,1520542471.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:31.864Z,1520542471.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:32.245Z,1520542472.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:32.260Z,1520542472.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:32.644Z,1520542472.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:32.659Z,1520542472.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:33.050Z,1520542473.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:33.065Z,1520542473.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:33.450Z,1520542473.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:33.471Z,1520542473.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:33.849Z,1520542473.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:33.869Z,1520542473.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:34.244Z,1520542474.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:34.259Z,1520542474.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:34.639Z,1520542474.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:34.658Z,1520542474.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:35.049Z,1520542475.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:35.064Z,1520542475.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:35.448Z,1520542475.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:35.474Z,1520542475.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:35.853Z,1520542475.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:35.874Z,1520542475.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:36.244Z,1520542476.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:36.259Z,1520542476.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:36.643Z,1520542476.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:36.663Z,1520542476.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:37.052Z,1520542477.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:37.073Z,1520542477.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:37.452Z,1520542477.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:37.467Z,1520542477.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:37.853Z,1520542477.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:37.868Z,1520542477.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:38.237Z,1520542478.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:38.259Z,1520542478.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:38.640Z,1520542478.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:38.655Z,1520542478.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:39.052Z,1520542479.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:39.068Z,1520542479.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:39.452Z,1520542479.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:39.474Z,1520542479.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:39.854Z,1520542479.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:39.869Z,1520542479.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:40.243Z,1520542480.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:40.272Z,1520542480.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:40.631Z,1520542480.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:40.667Z,1520542480.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:41.054Z,1520542481.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:41.069Z,1520542481.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:41.457Z,1520542481.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:41.474Z,1520542481.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:41.850Z,1520542481.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:41.870Z,1520542481.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:42.231Z,1520542482.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:42.260Z,1520542482.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:42.631Z,1520542482.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:42.667Z,1520542482.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:43.053Z,1520542483.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:43.069Z,1520542483.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:43.459Z,1520542483.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:43.478Z,1520542483.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:43.845Z,1520542483.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:43.869Z,1520542483.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:44.232Z,1520542484.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:44.267Z,1520542484.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:44.631Z,1520542484.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:44.669Z,1520542484.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:45.038Z,1520542485.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:45.078Z,1520542485.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:45.459Z,1520542485.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:45.474Z,1520542485.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:45.850Z,1520542485.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:45.875Z,1520542485.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:46.235Z,1520542486.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:46.262Z,1520542486.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:46.710Z,1520542486.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:46.758Z,1520542486.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:47.054Z,1520542487.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:47.079Z,1520542487.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:47.446Z,1520542487.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:47.469Z,1520542487.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:47.849Z,1520542487.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:47.864Z,1520542487.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:48.236Z,1520542488.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:48.267Z,1520542488.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:48.625Z,1520542488.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:48.640Z,1520542488.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:49.041Z,1520542489.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:49.067Z,1520542489.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:49.458Z,1520542489.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:49.477Z,1520542489.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:49.841Z,1520542489.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:49.873Z,1520542489.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:50.233Z,1520542490.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:50.260Z,1520542490.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:50.635Z,1520542490.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:50.674Z,1520542490.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:51.041Z,1520542491.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:51.067Z,1520542491.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:51.445Z,1520542491.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:51.483Z,1520542491.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:51.844Z,1520542491.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:51.873Z,1520542491.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:52.239Z,1520542492.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:52.272Z,1520542492.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:52.638Z,1520542492.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:52.654Z,1520542492.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:53.049Z,1520542493.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:53.093Z,1520542493.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:53.445Z,1520542493.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:53.460Z,1520542493.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:53.853Z,1520542493.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:53.888Z,1520542493.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:54.240Z,1520542494.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:54.255Z,1520542494.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:54.632Z,1520542494.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:54.659Z,1520542494.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:55.049Z,1520542495.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:55.065Z,1520542495.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:55.449Z,1520542495.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:55.464Z,1520542495.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:55.845Z,1520542495.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:55.861Z,1520542495.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:56.237Z,1520542496.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:56.257Z,1520542496.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:56.642Z,1520542496.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:56.657Z,1520542496.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:57.045Z,1520542497.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:57.060Z,1520542497.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:57.445Z,1520542497.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:57.460Z,1520542497.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:57.845Z,1520542497.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:57.872Z,1520542497.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:58.241Z,1520542498.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:58.257Z,1520542498.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:58.639Z,1520542498.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:58.654Z,1520542498.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:59.045Z,1520542499.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:59.066Z,1520542499.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:59.442Z,1520542499.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:59.473Z,1520542499.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:59.476Z,1520542499.476 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T20:54:59.481Z,1520542499.481 [Default:CheckIn:C.Wait] Stopped
2018-03-08T20:54:59.481Z,1520542499.481 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T20:54:59.481Z,1520542499.481 [Default:CheckIn:D] Running Loop=1
2018-03-08T20:54:59.848Z,1520542499.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:54:59.863Z,1520542499.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:54:59.867Z,1520542499.867 [Default:CheckIn:D] Stopped
2018-03-08T20:54:59.867Z,1520542499.867 [Default:CheckIn:E] Running Loop=1
2018-03-08T20:55:00.244Z,1520542500.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:00.259Z,1520542500.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:00.262Z,1520542500.262 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 789.251042 min 
2018-03-08T20:55:00.263Z,1520542500.263 [Default:CheckIn:E] Stopped
2018-03-08T20:55:00.263Z,1520542500.263 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T20:55:00.263Z,1520542500.263 [Default:CheckIn] Stopped
2018-03-08T20:55:00.263Z,1520542500.263 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T20:55:00.263Z,1520542500.263 [Default:CheckIn](INFO): Running loop #77
2018-03-08T20:55:00.263Z,1520542500.263 [Default:CheckIn] Running Loop=77
2018-03-08T20:55:00.263Z,1520542500.263 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T20:55:00.263Z,1520542500.263 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T20:55:03.326Z,1520542503.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:03.359Z,1520542503.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:03.469Z,1520542503.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:03.505Z,1520542503.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:03.839Z,1520542503.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:03.855Z,1520542503.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:04.240Z,1520542504.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:04.255Z,1520542504.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:04.617Z,1520542504.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:04.648Z,1520542504.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:05.014Z,1520542505.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:05.029Z,1520542505.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:05.415Z,1520542505.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:05.431Z,1520542505.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:05.814Z,1520542505.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:05.835Z,1520542505.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:06.225Z,1520542506.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:06.240Z,1520542506.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:06.612Z,1520542506.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:06.628Z,1520542506.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:07.025Z,1520542507.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:07.040Z,1520542507.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:07.416Z,1520542507.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:07.431Z,1520542507.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:07.816Z,1520542507.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:07.831Z,1520542507.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:08.218Z,1520542508.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:08.234Z,1520542508.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:08.614Z,1520542508.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:08.629Z,1520542508.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:09.018Z,1520542509.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:09.033Z,1520542509.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:09.422Z,1520542509.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:09.437Z,1520542509.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:09.829Z,1520542509.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:09.863Z,1520542509.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:10.218Z,1520542510.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:10.233Z,1520542510.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:10.614Z,1520542510.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:10.630Z,1520542510.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:11.017Z,1520542511.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:11.033Z,1520542511.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:11.417Z,1520542511.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:11.433Z,1520542511.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:11.821Z,1520542511.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:11.837Z,1520542511.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:12.216Z,1520542512.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:12.231Z,1520542512.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:12.611Z,1520542512.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:12.627Z,1520542512.627 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:12.627Z,1520542512.627 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 263
2018-03-08T20:55:12.627Z,1520542512.627 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T20:55:12.629Z,1520542512.629 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:12.629Z,1520542512.629 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 263
2018-03-08T20:55:12.629Z,1520542512.629 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T20:55:12.631Z,1520542512.631 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:12.631Z,1520542512.631 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 263
2018-03-08T20:55:12.631Z,1520542512.631 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T20:55:12.643Z,1520542512.643 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T20:55:12.643Z,1520542512.643 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T20:55:12.643Z,1520542512.643 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T20:55:13.037Z,1520542513.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:13.081Z,1520542513.081 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T20:55:13.082Z,1520542513.082 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 263
2018-03-08T20:55:13.082Z,1520542513.082 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T20:55:13.083Z,1520542513.083 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 263
2018-03-08T20:55:13.083Z,1520542513.083 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T20:55:13.084Z,1520542513.084 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 263
2018-03-08T20:55:13.424Z,1520542513.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:13.446Z,1520542513.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T20:55:13.446Z,1520542513.446 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:55:13.446Z,1520542513.446 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:55:13.447Z,1520542513.447 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T20:55:13.447Z,1520542513.447 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:55:13.448Z,1520542513.448 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:55:13.448Z,1520542513.448 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T20:55:13.448Z,1520542513.448 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:55:13.449Z,1520542513.449 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:55:13.829Z,1520542513.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:13.844Z,1520542513.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T20:55:13.845Z,1520542513.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:14.219Z,1520542514.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:14.238Z,1520542514.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T20:55:14.239Z,1520542514.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:14.618Z,1520542514.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:14.633Z,1520542514.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T20:55:14.634Z,1520542514.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:15.024Z,1520542515.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:15.047Z,1520542515.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T20:55:15.052Z,1520542515.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:15.429Z,1520542515.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:15.444Z,1520542515.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T20:55:15.445Z,1520542515.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:15.820Z,1520542515.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:15.846Z,1520542515.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T20:55:15.847Z,1520542515.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:16.242Z,1520542516.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:16.257Z,1520542516.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T20:55:16.258Z,1520542516.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:16.610Z,1520542516.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:16.642Z,1520542516.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T20:55:16.643Z,1520542516.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:17.029Z,1520542517.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:17.044Z,1520542517.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T20:55:17.045Z,1520542517.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:17.428Z,1520542517.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:17.443Z,1520542517.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T20:55:17.444Z,1520542517.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:17.837Z,1520542517.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:17.851Z,1520542517.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T20:55:17.853Z,1520542517.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:18.212Z,1520542518.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:18.240Z,1520542518.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T20:55:18.241Z,1520542518.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:18.605Z,1520542518.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:18.628Z,1520542518.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T20:55:18.633Z,1520542518.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:18.986Z,1520542518.986 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T20:55:18.986Z,1520542518.986 [NAL9602] Data Fault, FailCount= 3
2018-03-08T20:55:18.986Z,1520542518.986 [NAL9602](ERROR): Data Fault
2018-03-08T20:55:19.004Z,1520542519.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:19.020Z,1520542519.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T20:55:19.041Z,1520542519.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:19.062Z,1520542519.062 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T20:55:19.390Z,1520542519.390 [NAL9602](INFO): Powering down
2018-03-08T20:55:19.408Z,1520542519.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:19.452Z,1520542519.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T20:55:19.453Z,1520542519.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:19.806Z,1520542519.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:19.822Z,1520542519.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T20:55:19.823Z,1520542519.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:20.215Z,1520542520.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:20.246Z,1520542520.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T20:55:20.247Z,1520542520.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:20.280Z,1520542520.280 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T20:55:20.280Z,1520542520.280 [NAL9602] No Fault, FailCount= 3
2018-03-08T20:55:20.614Z,1520542520.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:20.629Z,1520542520.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T20:55:20.630Z,1520542520.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:21.007Z,1520542521.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:21.024Z,1520542521.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T20:55:21.025Z,1520542521.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:21.406Z,1520542521.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:21.440Z,1520542521.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T20:55:21.441Z,1520542521.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:21.814Z,1520542521.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:21.829Z,1520542521.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T20:55:21.830Z,1520542521.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:22.260Z,1520542522.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:22.281Z,1520542522.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-08T20:55:22.282Z,1520542522.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:22.612Z,1520542522.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:22.634Z,1520542522.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T20:55:22.635Z,1520542522.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:23.015Z,1520542523.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:23.030Z,1520542523.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T20:55:23.030Z,1520542523.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:23.412Z,1520542523.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:23.427Z,1520542523.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T20:55:23.428Z,1520542523.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:23.814Z,1520542523.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:23.828Z,1520542523.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T20:55:23.829Z,1520542523.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:24.214Z,1520542524.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:24.228Z,1520542524.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T20:55:24.229Z,1520542524.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:24.612Z,1520542524.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:24.627Z,1520542524.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T20:55:24.628Z,1520542524.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:25.013Z,1520542525.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:25.034Z,1520542525.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T20:55:25.035Z,1520542525.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:25.415Z,1520542525.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:25.430Z,1520542525.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T20:55:25.431Z,1520542525.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:25.810Z,1520542525.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:25.826Z,1520542525.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T20:55:25.827Z,1520542525.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:26.213Z,1520542526.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:26.234Z,1520542526.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T20:55:26.235Z,1520542526.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:26.615Z,1520542526.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:26.630Z,1520542526.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T20:55:26.631Z,1520542526.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:27.012Z,1520542527.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:27.027Z,1520542527.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T20:55:27.028Z,1520542527.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:27.415Z,1520542527.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:27.430Z,1520542527.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T20:55:27.431Z,1520542527.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:27.814Z,1520542527.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:27.829Z,1520542527.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T20:55:27.830Z,1520542527.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:28.214Z,1520542528.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:28.229Z,1520542528.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T20:55:28.230Z,1520542528.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:28.615Z,1520542528.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:28.629Z,1520542528.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T20:55:28.630Z,1520542528.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:29.017Z,1520542529.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:29.032Z,1520542529.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T20:55:29.033Z,1520542529.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:29.412Z,1520542529.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:29.427Z,1520542529.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T20:55:29.428Z,1520542529.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:29.814Z,1520542529.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:29.834Z,1520542529.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T20:55:29.835Z,1520542529.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:30.217Z,1520542530.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:30.232Z,1520542530.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T20:55:30.233Z,1520542530.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:30.612Z,1520542530.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:30.627Z,1520542530.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T20:55:30.629Z,1520542530.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:31.014Z,1520542531.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:31.034Z,1520542531.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T20:55:31.035Z,1520542531.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:31.418Z,1520542531.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:31.433Z,1520542531.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T20:55:31.434Z,1520542531.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:31.810Z,1520542531.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:31.825Z,1520542531.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T20:55:31.826Z,1520542531.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:32.219Z,1520542532.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:32.234Z,1520542532.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T20:55:32.235Z,1520542532.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:32.610Z,1520542532.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:32.625Z,1520542532.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T20:55:32.626Z,1520542532.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:33.007Z,1520542533.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:33.023Z,1520542533.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:33.415Z,1520542533.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:33.434Z,1520542533.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:33.818Z,1520542533.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:33.833Z,1520542533.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:34.212Z,1520542534.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:34.228Z,1520542534.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:34.614Z,1520542534.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:34.634Z,1520542534.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:35.018Z,1520542535.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:35.032Z,1520542535.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:35.412Z,1520542535.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:35.428Z,1520542535.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:35.810Z,1520542535.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:35.825Z,1520542535.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:36.218Z,1520542536.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:36.233Z,1520542536.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:36.612Z,1520542536.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:36.627Z,1520542536.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:37.014Z,1520542537.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:37.034Z,1520542537.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:37.417Z,1520542537.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:37.432Z,1520542537.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:37.810Z,1520542537.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:37.826Z,1520542537.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:38.214Z,1520542538.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:38.239Z,1520542538.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:38.618Z,1520542538.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:38.633Z,1520542538.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:39.012Z,1520542539.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:39.027Z,1520542539.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:39.414Z,1520542539.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:39.434Z,1520542539.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:39.818Z,1520542539.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:39.833Z,1520542539.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:40.219Z,1520542540.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:40.235Z,1520542540.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:40.617Z,1520542540.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:40.632Z,1520542540.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:41.019Z,1520542541.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:41.034Z,1520542541.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:41.400Z,1520542541.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:41.415Z,1520542541.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:41.813Z,1520542541.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:41.842Z,1520542541.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:42.208Z,1520542542.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:42.255Z,1520542542.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:42.606Z,1520542542.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:42.633Z,1520542542.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:43.031Z,1520542543.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:43.046Z,1520542543.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:43.406Z,1520542543.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:43.442Z,1520542543.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:43.808Z,1520542543.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:43.854Z,1520542543.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:44.226Z,1520542544.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:44.254Z,1520542544.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:44.608Z,1520542544.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:44.648Z,1520542544.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:45.017Z,1520542545.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:45.053Z,1520542545.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:45.424Z,1520542545.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:45.464Z,1520542545.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:45.815Z,1520542545.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:45.831Z,1520542545.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:46.228Z,1520542546.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:46.270Z,1520542546.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:46.618Z,1520542546.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:46.638Z,1520542546.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:47.013Z,1520542547.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:47.052Z,1520542547.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:47.400Z,1520542547.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:47.437Z,1520542547.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:47.802Z,1520542547.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:47.835Z,1520542547.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:48.218Z,1520542548.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:48.243Z,1520542548.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:48.615Z,1520542548.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:48.631Z,1520542548.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:49.014Z,1520542549.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:49.035Z,1520542549.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:49.394Z,1520542549.394 [NAL9602](INFO): Powering up NAL9602
2018-03-08T20:55:49.422Z,1520542549.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:49.443Z,1520542549.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:49.818Z,1520542549.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:49.834Z,1520542549.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:50.214Z,1520542550.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:50.229Z,1520542550.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:50.620Z,1520542550.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:50.636Z,1520542550.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:51.014Z,1520542551.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:51.030Z,1520542551.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:51.415Z,1520542551.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:51.434Z,1520542551.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:51.818Z,1520542551.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:51.838Z,1520542551.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:52.218Z,1520542552.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:52.234Z,1520542552.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:52.614Z,1520542552.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:52.633Z,1520542552.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:53.009Z,1520542553.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:53.041Z,1520542553.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:53.418Z,1520542553.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:53.434Z,1520542553.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:53.806Z,1520542553.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:53.833Z,1520542553.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:54.222Z,1520542554.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:54.238Z,1520542554.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:54.602Z,1520542554.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:54.635Z,1520542554.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:55.010Z,1520542555.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:55.036Z,1520542555.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:55.410Z,1520542555.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:55.447Z,1520542555.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:55.806Z,1520542555.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:55.843Z,1520542555.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:56.210Z,1520542556.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:56.242Z,1520542556.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:56.605Z,1520542556.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:56.637Z,1520542556.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:57.007Z,1520542557.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:57.038Z,1520542557.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:57.411Z,1520542557.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:57.443Z,1520542557.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:57.804Z,1520542557.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:57.820Z,1520542557.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:58.211Z,1520542558.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:58.242Z,1520542558.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:58.611Z,1520542558.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:58.654Z,1520542558.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:59.001Z,1520542559.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:59.017Z,1520542559.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:59.406Z,1520542559.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:59.423Z,1520542559.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:55:59.814Z,1520542559.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:55:59.830Z,1520542559.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:00.217Z,1520542560.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:00.245Z,1520542560.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:00.598Z,1520542560.598 [NAL9602](INFO): NAL9602 initialized
2018-03-08T20:56:00.615Z,1520542560.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:00.635Z,1520542560.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:03.727Z,1520542563.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:03.763Z,1520542563.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:03.855Z,1520542563.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:03.907Z,1520542563.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:04.237Z,1520542564.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:04.267Z,1520542564.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:04.629Z,1520542564.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:04.661Z,1520542564.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:05.013Z,1520542565.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:05.028Z,1520542565.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:05.416Z,1520542565.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:05.431Z,1520542565.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:05.815Z,1520542565.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:05.830Z,1520542565.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:06.234Z,1520542566.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:06.263Z,1520542566.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:06.629Z,1520542566.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:06.661Z,1520542566.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:07.033Z,1520542567.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:07.048Z,1520542567.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:07.415Z,1520542567.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:07.434Z,1520542567.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:07.820Z,1520542567.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:07.835Z,1520542567.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:08.225Z,1520542568.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:08.241Z,1520542568.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:08.624Z,1520542568.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:08.639Z,1520542568.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:09.029Z,1520542569.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:09.045Z,1520542569.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:09.423Z,1520542569.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:09.438Z,1520542569.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:09.822Z,1520542569.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:09.843Z,1520542569.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:10.224Z,1520542570.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:10.247Z,1520542570.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:10.629Z,1520542570.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:10.646Z,1520542570.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:11.029Z,1520542571.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:11.045Z,1520542571.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:11.424Z,1520542571.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:11.439Z,1520542571.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:11.820Z,1520542571.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:11.835Z,1520542571.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:12.232Z,1520542572.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:12.248Z,1520542572.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:12.632Z,1520542572.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:12.647Z,1520542572.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:13.033Z,1520542573.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:13.054Z,1520542573.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:13.418Z,1520542573.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:13.438Z,1520542573.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:13.827Z,1520542573.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:13.843Z,1520542573.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:14.233Z,1520542574.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:14.248Z,1520542574.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:14.628Z,1520542574.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:14.654Z,1520542574.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:15.029Z,1520542575.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:15.044Z,1520542575.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:15.420Z,1520542575.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:15.443Z,1520542575.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:15.824Z,1520542575.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:15.839Z,1520542575.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:16.232Z,1520542576.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:16.247Z,1520542576.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:16.633Z,1520542576.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:16.648Z,1520542576.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:17.029Z,1520542577.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:17.047Z,1520542577.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:17.420Z,1520542577.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:17.443Z,1520542577.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:17.819Z,1520542577.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:17.842Z,1520542577.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:18.232Z,1520542578.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:18.248Z,1520542578.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:18.632Z,1520542578.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:18.647Z,1520542578.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:19.031Z,1520542579.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:19.046Z,1520542579.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:19.419Z,1520542579.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:19.435Z,1520542579.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:19.821Z,1520542579.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:19.848Z,1520542579.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:20.232Z,1520542580.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:20.256Z,1520542580.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:20.627Z,1520542580.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:20.671Z,1520542580.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:21.023Z,1520542581.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:21.059Z,1520542581.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:21.411Z,1520542581.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:21.426Z,1520542581.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:21.828Z,1520542581.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:21.853Z,1520542581.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:22.239Z,1520542582.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:22.255Z,1520542582.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:22.629Z,1520542582.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:22.718Z,1520542582.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:23.021Z,1520542583.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:23.057Z,1520542583.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:23.418Z,1520542583.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:23.455Z,1520542583.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:23.813Z,1520542583.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:23.834Z,1520542583.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:24.225Z,1520542584.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:24.261Z,1520542584.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:24.633Z,1520542584.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:24.659Z,1520542584.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:25.033Z,1520542585.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:25.066Z,1520542585.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:25.461Z,1520542585.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:25.505Z,1520542585.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:25.816Z,1520542585.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:25.863Z,1520542585.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:26.229Z,1520542586.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:26.262Z,1520542586.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:26.622Z,1520542586.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:26.637Z,1520542586.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:27.026Z,1520542587.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:27.041Z,1520542587.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:27.421Z,1520542587.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:27.437Z,1520542587.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:27.820Z,1520542587.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:27.835Z,1520542587.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:28.225Z,1520542588.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:28.241Z,1520542588.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:28.621Z,1520542588.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:28.636Z,1520542588.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:29.036Z,1520542589.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:29.073Z,1520542589.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:29.419Z,1520542589.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:29.434Z,1520542589.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:29.819Z,1520542589.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:29.834Z,1520542589.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:30.226Z,1520542590.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:30.242Z,1520542590.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:30.629Z,1520542590.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:30.644Z,1520542590.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:31.025Z,1520542591.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:31.047Z,1520542591.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:31.416Z,1520542591.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:31.432Z,1520542591.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:31.824Z,1520542591.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:31.839Z,1520542591.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:32.225Z,1520542592.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:32.246Z,1520542592.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:32.629Z,1520542592.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:32.644Z,1520542592.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:33.028Z,1520542593.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:33.043Z,1520542593.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:33.416Z,1520542593.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:33.431Z,1520542593.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:33.816Z,1520542593.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:33.831Z,1520542593.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:34.226Z,1520542594.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:34.253Z,1520542594.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:34.633Z,1520542594.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:34.648Z,1520542594.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:35.031Z,1520542595.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:35.046Z,1520542595.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:35.419Z,1520542595.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:35.438Z,1520542595.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:35.811Z,1520542595.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:35.847Z,1520542595.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:36.223Z,1520542596.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:36.259Z,1520542596.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:36.650Z,1520542596.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:36.670Z,1520542596.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:37.040Z,1520542597.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:37.063Z,1520542597.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:37.416Z,1520542597.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:37.448Z,1520542597.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:37.816Z,1520542597.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:37.857Z,1520542597.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:38.245Z,1520542598.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:38.260Z,1520542598.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:38.626Z,1520542598.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:38.657Z,1520542598.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:39.030Z,1520542599.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:39.054Z,1520542599.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:39.423Z,1520542599.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:39.460Z,1520542599.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:39.812Z,1520542599.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:39.828Z,1520542599.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:40.229Z,1520542600.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:40.261Z,1520542600.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:40.625Z,1520542600.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:40.652Z,1520542600.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:41.021Z,1520542601.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:41.043Z,1520542601.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:41.420Z,1520542601.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:41.436Z,1520542601.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:41.819Z,1520542601.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:41.835Z,1520542601.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:42.222Z,1520542602.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:42.237Z,1520542602.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:42.633Z,1520542602.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:42.648Z,1520542602.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:43.025Z,1520542603.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:43.046Z,1520542603.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:43.424Z,1520542603.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:43.439Z,1520542603.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:43.815Z,1520542603.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:43.842Z,1520542603.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:44.233Z,1520542604.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:44.254Z,1520542604.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:44.627Z,1520542604.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:44.642Z,1520542604.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:45.029Z,1520542605.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:45.044Z,1520542605.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:45.407Z,1520542605.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:45.443Z,1520542605.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:45.823Z,1520542605.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:45.843Z,1520542605.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:46.232Z,1520542606.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:46.247Z,1520542606.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:46.633Z,1520542606.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:46.654Z,1520542606.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:47.022Z,1520542607.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:47.049Z,1520542607.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:47.411Z,1520542607.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:47.438Z,1520542607.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:47.811Z,1520542607.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:47.838Z,1520542607.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:48.233Z,1520542608.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:48.248Z,1520542608.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:48.633Z,1520542608.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:48.649Z,1520542608.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:49.033Z,1520542609.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:49.048Z,1520542609.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:49.408Z,1520542609.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:49.440Z,1520542609.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:49.827Z,1520542609.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:49.842Z,1520542609.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:50.233Z,1520542610.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:50.248Z,1520542610.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:50.625Z,1520542610.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:50.647Z,1520542610.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:51.033Z,1520542611.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:51.049Z,1520542611.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:51.414Z,1520542611.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:51.443Z,1520542611.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:51.815Z,1520542611.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:51.841Z,1520542611.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:52.234Z,1520542612.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:52.249Z,1520542612.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:52.638Z,1520542612.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:52.653Z,1520542612.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:53.021Z,1520542613.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:53.044Z,1520542613.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:53.411Z,1520542613.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:53.438Z,1520542613.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:53.811Z,1520542613.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:53.839Z,1520542613.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:54.231Z,1520542614.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:54.246Z,1520542614.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:54.637Z,1520542614.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:54.658Z,1520542614.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:55.033Z,1520542615.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:55.048Z,1520542615.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:55.408Z,1520542615.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:55.439Z,1520542615.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:55.811Z,1520542615.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:55.837Z,1520542615.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:56.235Z,1520542616.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:56.250Z,1520542616.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:56.630Z,1520542616.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:56.645Z,1520542616.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:57.025Z,1520542617.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:57.047Z,1520542617.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:57.411Z,1520542617.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:57.450Z,1520542617.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:57.807Z,1520542617.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:57.838Z,1520542617.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:58.225Z,1520542618.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:58.249Z,1520542618.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:58.634Z,1520542618.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:58.649Z,1520542618.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:59.024Z,1520542619.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:59.056Z,1520542619.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:59.411Z,1520542619.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:59.437Z,1520542619.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:56:59.811Z,1520542619.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:56:59.839Z,1520542619.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:00.234Z,1520542620.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:00.249Z,1520542620.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:00.625Z,1520542620.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:00.663Z,1520542620.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:03.729Z,1520542623.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:03.758Z,1520542623.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:03.852Z,1520542623.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:03.895Z,1520542623.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:04.215Z,1520542624.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:04.231Z,1520542624.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:04.617Z,1520542624.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:04.633Z,1520542624.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:05.013Z,1520542625.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:05.028Z,1520542625.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:05.422Z,1520542625.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:05.459Z,1520542625.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:05.830Z,1520542625.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:05.869Z,1520542625.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:06.218Z,1520542626.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:06.233Z,1520542626.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:06.614Z,1520542626.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:06.630Z,1520542626.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:07.014Z,1520542627.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:07.034Z,1520542627.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:07.414Z,1520542627.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:07.430Z,1520542627.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:07.814Z,1520542627.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:07.830Z,1520542627.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:08.229Z,1520542628.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:08.265Z,1520542628.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:08.625Z,1520542628.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:08.640Z,1520542628.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:09.024Z,1520542629.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:09.047Z,1520542629.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:09.417Z,1520542629.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:09.432Z,1520542629.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:09.816Z,1520542629.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:09.840Z,1520542629.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:10.227Z,1520542630.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:10.255Z,1520542630.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:10.636Z,1520542630.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:10.664Z,1520542630.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:11.019Z,1520542631.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:11.055Z,1520542631.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:11.409Z,1520542631.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:11.453Z,1520542631.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:11.817Z,1520542631.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:11.864Z,1520542631.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:12.224Z,1520542632.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:12.255Z,1520542632.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:12.635Z,1520542632.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:12.668Z,1520542632.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:13.031Z,1520542633.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:13.064Z,1520542633.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:13.418Z,1520542633.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:13.438Z,1520542633.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:13.816Z,1520542633.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:13.831Z,1520542633.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:14.237Z,1520542634.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:14.273Z,1520542634.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:14.630Z,1520542634.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:14.645Z,1520542634.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:15.029Z,1520542635.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:15.050Z,1520542635.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:15.408Z,1520542635.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:15.440Z,1520542635.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:15.820Z,1520542635.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:15.836Z,1520542635.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:16.233Z,1520542636.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:16.249Z,1520542636.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:16.633Z,1520542636.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:16.649Z,1520542636.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:17.030Z,1520542637.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:17.045Z,1520542637.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:17.408Z,1520542637.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:17.440Z,1520542637.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:17.821Z,1520542637.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:17.836Z,1520542637.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:18.225Z,1520542638.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:18.244Z,1520542638.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:18.633Z,1520542638.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:18.648Z,1520542638.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:19.033Z,1520542639.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:19.049Z,1520542639.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:19.407Z,1520542639.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:19.439Z,1520542639.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:19.807Z,1520542639.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:19.839Z,1520542639.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:20.233Z,1520542640.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:20.249Z,1520542640.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:20.626Z,1520542640.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:20.641Z,1520542640.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:21.024Z,1520542641.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:21.047Z,1520542641.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:21.420Z,1520542641.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:21.436Z,1520542641.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:21.803Z,1520542641.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:21.835Z,1520542641.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:22.233Z,1520542642.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:22.254Z,1520542642.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:22.626Z,1520542642.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:22.640Z,1520542642.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:23.020Z,1520542643.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:23.042Z,1520542643.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:23.420Z,1520542643.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:23.435Z,1520542643.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:23.802Z,1520542643.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:23.839Z,1520542643.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:24.230Z,1520542644.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:24.250Z,1520542644.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:24.632Z,1520542644.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:24.647Z,1520542644.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:25.029Z,1520542645.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:25.044Z,1520542645.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:25.420Z,1520542645.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:25.435Z,1520542645.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:25.806Z,1520542645.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:25.843Z,1520542645.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:26.231Z,1520542646.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:26.247Z,1520542646.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:26.626Z,1520542646.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:26.642Z,1520542646.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:27.029Z,1520542647.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:27.045Z,1520542647.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:27.403Z,1520542647.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:27.439Z,1520542647.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:27.810Z,1520542647.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:27.837Z,1520542647.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:28.233Z,1520542648.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:28.249Z,1520542648.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:28.633Z,1520542648.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:28.648Z,1520542648.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:29.027Z,1520542649.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:29.042Z,1520542649.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:29.407Z,1520542649.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:29.443Z,1520542649.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:29.806Z,1520542649.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:29.840Z,1520542649.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:30.230Z,1520542650.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:30.246Z,1520542650.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:30.625Z,1520542650.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:30.647Z,1520542650.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:31.016Z,1520542651.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:31.053Z,1520542651.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:31.411Z,1520542651.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:31.438Z,1520542651.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:31.806Z,1520542651.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:31.843Z,1520542651.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:32.234Z,1520542652.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:32.249Z,1520542652.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:32.629Z,1520542652.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:32.645Z,1520542652.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:33.017Z,1520542653.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:33.092Z,1520542653.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:33.436Z,1520542653.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:33.451Z,1520542653.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:33.807Z,1520542653.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:33.847Z,1520542653.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:34.233Z,1520542654.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:34.249Z,1520542654.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:34.621Z,1520542654.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:34.648Z,1520542654.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:35.021Z,1520542655.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:35.048Z,1520542655.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:35.432Z,1520542655.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:35.447Z,1520542655.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:35.814Z,1520542655.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:35.845Z,1520542655.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:36.221Z,1520542656.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:36.245Z,1520542656.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:36.625Z,1520542656.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:36.648Z,1520542656.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:37.024Z,1520542657.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:37.048Z,1520542657.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:37.414Z,1520542657.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:37.438Z,1520542657.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:37.815Z,1520542657.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:37.855Z,1520542657.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:38.221Z,1520542658.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:38.255Z,1520542658.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:38.630Z,1520542658.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:38.662Z,1520542658.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:39.025Z,1520542659.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:39.048Z,1520542659.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:39.412Z,1520542659.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:39.426Z,1520542659.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:39.812Z,1520542659.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:39.827Z,1520542659.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:40.225Z,1520542660.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:40.258Z,1520542660.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:40.634Z,1520542660.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:40.660Z,1520542660.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:41.025Z,1520542661.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:41.058Z,1520542661.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:41.413Z,1520542661.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:41.450Z,1520542661.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:41.839Z,1520542661.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:41.865Z,1520542661.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:42.261Z,1520542662.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:42.280Z,1520542662.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:42.623Z,1520542662.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:42.638Z,1520542662.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:43.031Z,1520542663.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:43.076Z,1520542663.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:43.420Z,1520542663.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:43.443Z,1520542663.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:43.806Z,1520542663.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:43.833Z,1520542663.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:44.242Z,1520542664.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:44.278Z,1520542664.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:44.630Z,1520542664.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:44.648Z,1520542664.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:45.036Z,1520542665.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:45.052Z,1520542665.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:45.409Z,1520542665.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:45.490Z,1520542665.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:45.807Z,1520542665.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:45.834Z,1520542665.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:46.230Z,1520542666.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:46.251Z,1520542666.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:46.629Z,1520542666.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:46.645Z,1520542666.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:47.029Z,1520542667.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:47.045Z,1520542667.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:47.406Z,1520542667.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:47.432Z,1520542667.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:47.803Z,1520542667.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:47.839Z,1520542667.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:48.231Z,1520542668.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:48.251Z,1520542668.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:48.629Z,1520542668.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:48.645Z,1520542668.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:49.028Z,1520542669.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:49.055Z,1520542669.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:49.419Z,1520542669.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:49.455Z,1520542669.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:49.812Z,1520542669.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:49.827Z,1520542669.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:50.226Z,1520542670.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:50.259Z,1520542670.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:50.629Z,1520542670.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:50.654Z,1520542670.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:51.025Z,1520542671.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:51.058Z,1520542671.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:51.413Z,1520542671.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:51.428Z,1520542671.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:51.819Z,1520542671.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:51.859Z,1520542671.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:52.225Z,1520542672.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:52.259Z,1520542672.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:52.629Z,1520542672.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:52.655Z,1520542672.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:53.025Z,1520542673.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:53.059Z,1520542673.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:53.419Z,1520542673.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:53.435Z,1520542673.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:53.816Z,1520542673.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:53.831Z,1520542673.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:54.218Z,1520542674.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:54.241Z,1520542674.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:54.625Z,1520542674.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:54.640Z,1520542674.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:55.022Z,1520542675.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:55.037Z,1520542675.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:55.419Z,1520542675.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:55.435Z,1520542675.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:55.813Z,1520542675.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:55.841Z,1520542675.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:56.226Z,1520542676.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:56.241Z,1520542676.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:56.624Z,1520542676.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:56.640Z,1520542676.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:57.024Z,1520542677.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:57.040Z,1520542677.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:57.422Z,1520542677.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:57.437Z,1520542677.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:57.805Z,1520542677.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:57.838Z,1520542677.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:58.226Z,1520542678.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:58.241Z,1520542678.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:58.625Z,1520542678.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:58.640Z,1520542678.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:59.024Z,1520542679.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:59.040Z,1520542679.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:59.420Z,1520542679.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:59.436Z,1520542679.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:57:59.820Z,1520542679.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:57:59.836Z,1520542679.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:00.224Z,1520542680.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:00.240Z,1520542680.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:00.624Z,1520542680.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:00.647Z,1520542680.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:01.025Z,1520542681.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:01.047Z,1520542681.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:04.119Z,1520542684.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:04.135Z,1520542684.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:04.236Z,1520542684.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:04.274Z,1520542684.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:04.610Z,1520542684.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:04.630Z,1520542684.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:04.997Z,1520542684.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:05.024Z,1520542685.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:05.414Z,1520542685.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:05.429Z,1520542685.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:05.791Z,1520542685.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:05.837Z,1520542685.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:06.187Z,1520542686.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:06.226Z,1520542686.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:06.587Z,1520542686.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:06.619Z,1520542686.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:06.986Z,1520542686.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:07.029Z,1520542687.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:07.402Z,1520542687.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:07.430Z,1520542687.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:07.801Z,1520542687.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:07.834Z,1520542687.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:08.201Z,1520542688.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:08.227Z,1520542688.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:08.583Z,1520542688.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:08.598Z,1520542688.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:08.987Z,1520542688.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:09.006Z,1520542689.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:09.385Z,1520542689.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:09.400Z,1520542689.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:09.790Z,1520542689.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:09.805Z,1520542689.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:10.201Z,1520542690.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:10.237Z,1520542690.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:10.605Z,1520542690.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:10.636Z,1520542690.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:10.997Z,1520542690.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:11.036Z,1520542691.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:11.393Z,1520542691.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:11.408Z,1520542691.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:11.792Z,1520542691.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:11.814Z,1520542691.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:12.206Z,1520542692.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:12.240Z,1520542692.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:12.605Z,1520542692.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:12.620Z,1520542692.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:12.997Z,1520542692.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:13.013Z,1520542693.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:13.396Z,1520542693.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:13.411Z,1520542693.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:13.794Z,1520542693.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:13.809Z,1520542693.809 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:13.810Z,1520542693.810 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 264
2018-03-08T20:58:13.810Z,1520542693.810 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T20:58:13.811Z,1520542693.811 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:13.811Z,1520542693.811 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 264
2018-03-08T20:58:13.812Z,1520542693.812 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T20:58:13.813Z,1520542693.813 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:13.813Z,1520542693.813 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 264
2018-03-08T20:58:13.814Z,1520542693.814 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T20:58:13.837Z,1520542693.837 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T20:58:13.837Z,1520542693.837 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T20:58:13.837Z,1520542693.837 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T20:58:14.196Z,1520542694.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:14.251Z,1520542694.251 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T20:58:14.251Z,1520542694.251 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 264
2018-03-08T20:58:14.252Z,1520542694.252 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T20:58:14.252Z,1520542694.252 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 264
2018-03-08T20:58:14.252Z,1520542694.252 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T20:58:14.252Z,1520542694.252 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 264
2018-03-08T20:58:14.606Z,1520542694.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:14.620Z,1520542694.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T20:58:14.621Z,1520542694.621 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:58:14.621Z,1520542694.621 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:58:14.621Z,1520542694.621 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T20:58:14.622Z,1520542694.622 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:58:14.622Z,1520542694.622 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:58:14.622Z,1520542694.622 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T20:58:14.623Z,1520542694.623 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T20:58:14.623Z,1520542694.623 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T20:58:15.006Z,1520542695.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:15.020Z,1520542695.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T20:58:15.021Z,1520542695.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:15.400Z,1520542695.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:15.414Z,1520542695.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T20:58:15.415Z,1520542695.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:15.782Z,1520542695.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:15.814Z,1520542695.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T20:58:15.815Z,1520542695.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:16.212Z,1520542696.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:16.228Z,1520542696.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T20:58:16.229Z,1520542696.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:16.609Z,1520542696.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:16.624Z,1520542696.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T20:58:16.625Z,1520542696.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:17.007Z,1520542697.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:17.022Z,1520542697.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T20:58:17.023Z,1520542697.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:17.387Z,1520542697.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:17.413Z,1520542697.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T20:58:17.414Z,1520542697.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:17.782Z,1520542697.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:17.809Z,1520542697.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T20:58:17.810Z,1520542697.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:18.206Z,1520542698.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:18.221Z,1520542698.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T20:58:18.222Z,1520542698.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:18.662Z,1520542698.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:18.682Z,1520542698.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-08T20:58:18.684Z,1520542698.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:19.007Z,1520542699.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:19.022Z,1520542699.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T20:58:19.023Z,1520542699.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:19.391Z,1520542699.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:19.418Z,1520542699.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T20:58:19.419Z,1520542699.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:19.793Z,1520542699.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:19.808Z,1520542699.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T20:58:19.809Z,1520542699.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:20.201Z,1520542700.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:20.216Z,1520542700.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T20:58:20.233Z,1520542700.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:20.605Z,1520542700.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:20.619Z,1520542700.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T20:58:20.620Z,1520542700.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:20.997Z,1520542700.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:21.012Z,1520542701.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T20:58:21.014Z,1520542701.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:21.390Z,1520542701.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:21.410Z,1520542701.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T20:58:21.411Z,1520542701.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:21.797Z,1520542701.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:21.811Z,1520542701.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T20:58:21.812Z,1520542701.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:22.198Z,1520542702.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:22.214Z,1520542702.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T20:58:22.215Z,1520542702.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:22.602Z,1520542702.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:22.617Z,1520542702.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T20:58:22.618Z,1520542702.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:23.001Z,1520542703.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:23.016Z,1520542703.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T20:58:23.017Z,1520542703.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:23.403Z,1520542703.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:23.422Z,1520542703.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T20:58:23.423Z,1520542703.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:23.783Z,1520542703.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:23.823Z,1520542703.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T20:58:23.824Z,1520542703.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:24.206Z,1520542704.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:24.226Z,1520542704.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T20:58:24.227Z,1520542704.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:24.609Z,1520542704.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:24.630Z,1520542704.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T20:58:24.631Z,1520542704.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:25.005Z,1520542705.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:25.021Z,1520542705.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T20:58:25.022Z,1520542705.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:25.383Z,1520542705.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:25.410Z,1520542705.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T20:58:25.411Z,1520542705.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:25.783Z,1520542705.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:25.809Z,1520542705.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T20:58:25.810Z,1520542705.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:26.196Z,1520542706.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:26.228Z,1520542706.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T20:58:26.229Z,1520542706.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:26.602Z,1520542706.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:26.617Z,1520542706.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T20:58:26.617Z,1520542706.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:27.005Z,1520542707.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:27.020Z,1520542707.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T20:58:27.021Z,1520542707.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:27.383Z,1520542707.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:27.410Z,1520542707.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T20:58:27.411Z,1520542707.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:27.779Z,1520542707.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:27.815Z,1520542707.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T20:58:27.816Z,1520542707.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:28.205Z,1520542708.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:28.220Z,1520542708.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T20:58:28.221Z,1520542708.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:28.606Z,1520542708.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:28.620Z,1520542708.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T20:58:28.621Z,1520542708.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:29.004Z,1520542709.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:29.019Z,1520542709.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T20:58:29.020Z,1520542709.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:29.383Z,1520542709.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:29.418Z,1520542709.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T20:58:29.419Z,1520542709.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:29.783Z,1520542709.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:29.833Z,1520542709.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T20:58:29.834Z,1520542709.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:30.206Z,1520542710.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:30.221Z,1520542710.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T20:58:30.222Z,1520542710.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:30.610Z,1520542710.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:30.630Z,1520542710.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T20:58:30.631Z,1520542710.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:30.993Z,1520542710.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:31.026Z,1520542711.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T20:58:31.027Z,1520542711.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:31.383Z,1520542711.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:31.410Z,1520542711.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T20:58:31.411Z,1520542711.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:31.783Z,1520542711.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:31.818Z,1520542711.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T20:58:31.819Z,1520542711.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:32.202Z,1520542712.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:32.230Z,1520542712.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T20:58:32.231Z,1520542712.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:32.597Z,1520542712.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:32.627Z,1520542712.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T20:58:32.628Z,1520542712.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:32.993Z,1520542712.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:33.024Z,1520542713.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T20:58:33.025Z,1520542713.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:33.393Z,1520542713.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:33.407Z,1520542713.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T20:58:33.408Z,1520542713.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:33.787Z,1520542713.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:33.802Z,1520542713.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T20:58:33.803Z,1520542713.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:34.197Z,1520542714.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:34.229Z,1520542714.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:34.605Z,1520542714.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:34.637Z,1520542714.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:35.005Z,1520542715.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:35.037Z,1520542715.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:35.389Z,1520542715.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:35.405Z,1520542715.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:35.793Z,1520542715.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:35.808Z,1520542715.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:36.206Z,1520542716.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:36.237Z,1520542716.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:36.590Z,1520542716.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:36.605Z,1520542716.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:36.997Z,1520542716.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:37.013Z,1520542717.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:37.393Z,1520542717.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:37.409Z,1520542717.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:37.792Z,1520542717.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:37.808Z,1520542717.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:38.205Z,1520542718.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:38.233Z,1520542718.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:38.593Z,1520542718.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:38.608Z,1520542718.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:38.993Z,1520542718.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:39.008Z,1520542719.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:39.393Z,1520542719.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:39.408Z,1520542719.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:39.792Z,1520542719.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:39.807Z,1520542719.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:40.206Z,1520542720.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:40.235Z,1520542720.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:40.597Z,1520542720.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:40.612Z,1520542720.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:41.005Z,1520542721.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:41.037Z,1520542721.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:41.388Z,1520542721.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:41.404Z,1520542721.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:41.792Z,1520542721.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:41.807Z,1520542721.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:42.198Z,1520542722.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:42.236Z,1520542722.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:42.592Z,1520542722.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:42.607Z,1520542722.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:42.997Z,1520542722.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:43.013Z,1520542723.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:43.393Z,1520542723.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:43.408Z,1520542723.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:43.788Z,1520542723.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:43.804Z,1520542723.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:44.194Z,1520542724.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:44.209Z,1520542724.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:44.605Z,1520542724.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:44.637Z,1520542724.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:45.005Z,1520542725.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:45.036Z,1520542725.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:45.390Z,1520542725.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:45.406Z,1520542725.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:45.792Z,1520542725.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:45.807Z,1520542725.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:46.192Z,1520542726.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:46.208Z,1520542726.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:46.605Z,1520542726.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:46.635Z,1520542726.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:46.998Z,1520542726.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:47.036Z,1520542727.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:47.393Z,1520542727.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:47.408Z,1520542727.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:47.792Z,1520542727.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:47.808Z,1520542727.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:48.205Z,1520542728.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:48.236Z,1520542728.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:48.592Z,1520542728.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:48.607Z,1520542728.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:49.005Z,1520542729.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:49.036Z,1520542729.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:49.393Z,1520542729.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:49.407Z,1520542729.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:49.793Z,1520542729.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:49.809Z,1520542729.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:50.194Z,1520542730.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:50.209Z,1520542730.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:50.605Z,1520542730.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:50.620Z,1520542730.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:50.993Z,1520542730.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:51.014Z,1520542731.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:51.393Z,1520542731.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:51.408Z,1520542731.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:51.792Z,1520542731.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:51.808Z,1520542731.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:52.194Z,1520542732.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:52.209Z,1520542732.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:52.597Z,1520542732.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:52.612Z,1520542732.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:53.005Z,1520542733.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:53.040Z,1520542733.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:53.393Z,1520542733.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:53.409Z,1520542733.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:53.792Z,1520542733.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:53.808Z,1520542733.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:54.197Z,1520542734.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:54.218Z,1520542734.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:54.592Z,1520542734.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:54.608Z,1520542734.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:54.993Z,1520542734.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:55.009Z,1520542735.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:55.394Z,1520542735.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:55.409Z,1520542735.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:55.792Z,1520542735.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:55.808Z,1520542735.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:56.205Z,1520542736.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:56.237Z,1520542736.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:56.600Z,1520542736.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:56.615Z,1520542736.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:56.996Z,1520542736.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:57.018Z,1520542737.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:57.390Z,1520542737.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:57.418Z,1520542737.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:57.790Z,1520542737.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:57.805Z,1520542737.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:58.200Z,1520542738.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:58.231Z,1520542738.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:58.640Z,1520542738.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:58.723Z,1520542738.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:59.006Z,1520542739.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:59.021Z,1520542739.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:59.378Z,1520542739.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:59.393Z,1520542739.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:58:59.787Z,1520542739.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:58:59.806Z,1520542739.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:00.194Z,1520542740.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:00.209Z,1520542740.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:00.593Z,1520542740.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:00.631Z,1520542740.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:00.998Z,1520542740.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:01.013Z,1520542741.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:01.387Z,1520542741.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:01.402Z,1520542741.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:04.637Z,1520542744.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:04.661Z,1520542744.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:04.777Z,1520542744.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:04.793Z,1520542744.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:05.137Z,1520542745.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:05.168Z,1520542745.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:05.525Z,1520542745.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:05.540Z,1520542745.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:05.923Z,1520542745.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:05.938Z,1520542745.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:06.317Z,1520542746.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:06.332Z,1520542746.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:06.719Z,1520542746.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:06.764Z,1520542746.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:07.122Z,1520542747.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:07.142Z,1520542747.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:07.525Z,1520542747.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:07.540Z,1520542747.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:07.926Z,1520542747.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:07.941Z,1520542747.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:08.325Z,1520542748.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:08.340Z,1520542748.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:08.719Z,1520542748.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:08.742Z,1520542748.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:09.101Z,1520542749.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:09.127Z,1520542749.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:09.522Z,1520542749.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:09.537Z,1520542749.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:09.919Z,1520542749.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:09.934Z,1520542749.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:10.329Z,1520542750.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:10.344Z,1520542750.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:10.728Z,1520542750.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:10.743Z,1520542750.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:11.128Z,1520542751.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:11.143Z,1520542751.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:11.517Z,1520542751.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:11.539Z,1520542751.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:11.920Z,1520542751.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:11.936Z,1520542751.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:12.314Z,1520542752.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:12.342Z,1520542752.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:12.704Z,1520542752.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:12.737Z,1520542752.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:13.116Z,1520542753.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:13.139Z,1520542753.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:13.530Z,1520542753.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:13.545Z,1520542753.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:13.934Z,1520542753.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:13.950Z,1520542753.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:14.333Z,1520542754.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:14.354Z,1520542754.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:14.711Z,1520542754.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:14.738Z,1520542754.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:15.104Z,1520542755.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:15.143Z,1520542755.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:15.511Z,1520542755.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:15.537Z,1520542755.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:15.909Z,1520542755.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:15.936Z,1520542755.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:16.334Z,1520542756.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:16.349Z,1520542756.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:16.733Z,1520542756.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:16.748Z,1520542756.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:17.126Z,1520542757.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:17.141Z,1520542757.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:17.507Z,1520542757.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:17.547Z,1520542757.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:17.911Z,1520542757.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:17.942Z,1520542757.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:18.306Z,1520542758.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:18.344Z,1520542758.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:18.705Z,1520542758.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:18.720Z,1520542758.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:19.115Z,1520542759.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:19.150Z,1520542759.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:19.535Z,1520542759.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:19.550Z,1520542759.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:19.933Z,1520542759.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:19.948Z,1520542759.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:20.321Z,1520542760.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:20.357Z,1520542760.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:20.715Z,1520542760.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:20.746Z,1520542760.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:21.105Z,1520542761.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:21.121Z,1520542761.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:21.513Z,1520542761.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:21.549Z,1520542761.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:21.908Z,1520542761.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:21.923Z,1520542761.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:22.321Z,1520542762.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:22.353Z,1520542762.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:22.729Z,1520542762.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:22.754Z,1520542762.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:23.130Z,1520542763.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:23.162Z,1520542763.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:23.507Z,1520542763.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:23.527Z,1520542763.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:23.920Z,1520542763.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:23.935Z,1520542763.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:24.315Z,1520542764.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:24.329Z,1520542764.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:24.713Z,1520542764.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:24.729Z,1520542764.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:25.112Z,1520542765.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:25.136Z,1520542765.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:25.533Z,1520542765.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:25.557Z,1520542765.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:25.930Z,1520542765.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:25.971Z,1520542765.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:26.322Z,1520542766.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:26.337Z,1520542766.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:26.716Z,1520542766.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:26.731Z,1520542766.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:27.116Z,1520542767.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:27.136Z,1520542767.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:27.517Z,1520542767.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:27.533Z,1520542767.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:27.915Z,1520542767.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:27.932Z,1520542767.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:28.321Z,1520542768.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:28.337Z,1520542768.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:28.721Z,1520542768.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:28.738Z,1520542768.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:29.129Z,1520542769.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:29.160Z,1520542769.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:29.512Z,1520542769.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:29.527Z,1520542769.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:29.916Z,1520542769.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:29.931Z,1520542769.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:30.321Z,1520542770.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:30.335Z,1520542770.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:30.714Z,1520542770.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:30.729Z,1520542770.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:31.110Z,1520542771.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:31.129Z,1520542771.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:31.520Z,1520542771.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:31.535Z,1520542771.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:31.937Z,1520542771.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:31.968Z,1520542771.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:32.321Z,1520542772.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:32.342Z,1520542772.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:32.719Z,1520542772.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:32.734Z,1520542772.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:33.111Z,1520542773.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:33.131Z,1520542773.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:33.524Z,1520542773.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:33.539Z,1520542773.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:33.917Z,1520542773.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:33.931Z,1520542773.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:34.321Z,1520542774.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:34.337Z,1520542774.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:34.721Z,1520542774.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:34.737Z,1520542774.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:35.125Z,1520542775.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:35.146Z,1520542775.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:35.515Z,1520542775.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:35.530Z,1520542775.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:35.922Z,1520542775.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:35.967Z,1520542775.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:36.314Z,1520542776.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:36.329Z,1520542776.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:36.714Z,1520542776.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:36.735Z,1520542776.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:37.119Z,1520542777.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:37.134Z,1520542777.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:37.522Z,1520542777.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:37.537Z,1520542777.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:37.924Z,1520542777.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:37.939Z,1520542777.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:38.325Z,1520542778.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:38.341Z,1520542778.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:38.718Z,1520542778.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:38.738Z,1520542778.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:39.109Z,1520542779.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:39.129Z,1520542779.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:39.515Z,1520542779.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:39.531Z,1520542779.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:39.923Z,1520542779.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:39.938Z,1520542779.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:40.325Z,1520542780.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:40.340Z,1520542780.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:40.725Z,1520542780.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:40.741Z,1520542780.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:41.120Z,1520542781.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:41.135Z,1520542781.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:41.525Z,1520542781.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:41.574Z,1520542781.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:41.948Z,1520542781.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:41.971Z,1520542781.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:42.317Z,1520542782.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:42.341Z,1520542782.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:42.707Z,1520542782.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:42.758Z,1520542782.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:43.133Z,1520542783.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:43.165Z,1520542783.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:43.539Z,1520542783.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:43.554Z,1520542783.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:43.935Z,1520542783.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:43.959Z,1520542783.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:44.339Z,1520542784.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:44.368Z,1520542784.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:44.712Z,1520542784.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:44.727Z,1520542784.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:45.121Z,1520542785.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:45.157Z,1520542785.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:45.517Z,1520542785.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:45.557Z,1520542785.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:45.914Z,1520542785.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:45.934Z,1520542785.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:46.323Z,1520542786.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:46.342Z,1520542786.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:46.725Z,1520542786.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:46.741Z,1520542786.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:47.122Z,1520542787.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:47.142Z,1520542787.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:47.514Z,1520542787.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:47.529Z,1520542787.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:47.915Z,1520542787.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:47.937Z,1520542787.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:48.320Z,1520542788.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:48.336Z,1520542788.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:48.715Z,1520542788.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:48.731Z,1520542788.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:49.114Z,1520542789.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:49.134Z,1520542789.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:49.522Z,1520542789.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:49.546Z,1520542789.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:49.930Z,1520542789.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:49.945Z,1520542789.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:50.328Z,1520542790.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:50.343Z,1520542790.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:50.719Z,1520542790.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:50.735Z,1520542790.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:51.114Z,1520542791.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:51.140Z,1520542791.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:51.518Z,1520542791.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:51.538Z,1520542791.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:51.920Z,1520542791.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:51.936Z,1520542791.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:52.331Z,1520542792.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:52.347Z,1520542792.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:52.729Z,1520542792.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:52.755Z,1520542792.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:53.132Z,1520542793.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:53.156Z,1520542793.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:53.507Z,1520542793.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:53.522Z,1520542793.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:53.915Z,1520542793.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:53.952Z,1520542793.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:54.317Z,1520542794.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:54.350Z,1520542794.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:54.713Z,1520542794.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:54.729Z,1520542794.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:55.114Z,1520542795.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:55.129Z,1520542795.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:55.529Z,1520542795.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:55.553Z,1520542795.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:55.925Z,1520542795.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:55.957Z,1520542795.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:56.325Z,1520542796.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:56.356Z,1520542796.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:56.716Z,1520542796.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:56.732Z,1520542796.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:57.115Z,1520542797.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:57.131Z,1520542797.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:57.515Z,1520542797.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:57.538Z,1520542797.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:57.918Z,1520542797.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:57.938Z,1520542797.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:58.321Z,1520542798.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:58.337Z,1520542798.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:58.721Z,1520542798.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:58.737Z,1520542798.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:59.135Z,1520542799.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:59.162Z,1520542799.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:59.518Z,1520542799.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:59.534Z,1520542799.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T20:59:59.919Z,1520542799.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T20:59:59.934Z,1520542799.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:00.315Z,1520542800.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:00.331Z,1520542800.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:00.334Z,1520542800.334 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T20:55:00.3Z
2018-03-08T21:00:00.334Z,1520542800.334 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T21:00:00.334Z,1520542800.334 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T21:00:00.716Z,1520542800.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:00.732Z,1520542800.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:01.213Z,1520542801.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:01.229Z,1520542801.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:01.525Z,1520542801.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:01.540Z,1520542801.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:04.621Z,1520542804.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:04.637Z,1520542804.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:04.753Z,1520542804.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:04.786Z,1520542804.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:05.074Z,1520542805.074 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0308.lzma
2018-03-08T21:00:05.099Z,1520542805.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:05.127Z,1520542805.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:05.491Z,1520542805.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:05.523Z,1520542805.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:05.864Z,1520542805.864 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0308.lzma.bak
2018-03-08T21:00:05.864Z,1520542805.864 [DataOverHttps](INFO): SBD MOMSN=7989082
2018-03-08T21:00:05.891Z,1520542805.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:05.939Z,1520542805.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:06.493Z,1520542806.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:06.529Z,1520542806.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:06.715Z,1520542806.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:06.731Z,1520542806.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:09.815Z,1520542809.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:09.831Z,1520542809.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:09.930Z,1520542809.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:09.946Z,1520542809.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:10.290Z,1520542810.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:10.327Z,1520542810.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:10.686Z,1520542810.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:10.734Z,1520542810.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:11.086Z,1520542811.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:11.102Z,1520542811.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:11.505Z,1520542811.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:11.528Z,1520542811.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:11.904Z,1520542811.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:11.930Z,1520542811.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:15.001Z,1520542815.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:15.025Z,1520542815.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:15.129Z,1520542815.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:15.146Z,1520542815.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:15.453Z,1520542815.453 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180308T074127/Express0309.lzma
2018-03-08T21:00:15.491Z,1520542815.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:15.507Z,1520542815.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:15.885Z,1520542815.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:15.901Z,1520542815.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:21.505Z,1520542821.505 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0309.lzma.bak
2018-03-08T21:00:21.505Z,1520542821.505 [DataOverHttps](INFO): SBD MOMSN=7989084
2018-03-08T21:00:21.542Z,1520542821.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:21.558Z,1520542821.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:21.891Z,1520542821.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:21.908Z,1520542821.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:21.911Z,1520542821.911 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T21:00:21.911Z,1520542821.911 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T21:00:21.911Z,1520542821.911 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T21:00:22.045Z,1520542822.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:22.078Z,1520542822.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:25.214Z,1520542825.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:25.231Z,1520542825.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:25.326Z,1520542825.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:25.370Z,1520542825.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:25.705Z,1520542825.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:25.721Z,1520542825.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:26.097Z,1520542826.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:26.121Z,1520542826.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:26.494Z,1520542826.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:26.519Z,1520542826.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:26.884Z,1520542826.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:26.899Z,1520542826.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:27.280Z,1520542827.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:27.294Z,1520542827.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:27.682Z,1520542827.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:27.702Z,1520542827.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:28.086Z,1520542828.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:28.102Z,1520542828.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:28.502Z,1520542828.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:28.528Z,1520542828.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:28.893Z,1520542828.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:28.908Z,1520542828.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:29.297Z,1520542829.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:29.312Z,1520542829.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:29.686Z,1520542829.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:29.701Z,1520542829.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:30.080Z,1520542830.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:30.107Z,1520542830.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:30.491Z,1520542830.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:30.510Z,1520542830.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:30.890Z,1520542830.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:30.905Z,1520542830.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:31.293Z,1520542831.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:31.308Z,1520542831.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:31.693Z,1520542831.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:31.708Z,1520542831.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:32.093Z,1520542832.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:32.114Z,1520542832.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:32.480Z,1520542832.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:32.496Z,1520542832.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:32.883Z,1520542832.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:32.910Z,1520542832.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:33.291Z,1520542833.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:33.307Z,1520542833.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:33.673Z,1520542833.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:33.708Z,1520542833.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:34.091Z,1520542834.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:34.110Z,1520542834.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:34.496Z,1520542834.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:34.512Z,1520542834.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:34.897Z,1520542834.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:34.913Z,1520542834.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:35.296Z,1520542835.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:35.311Z,1520542835.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:35.687Z,1520542835.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:35.703Z,1520542835.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:36.078Z,1520542836.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:36.111Z,1520542836.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:36.491Z,1520542836.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:36.507Z,1520542836.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:36.888Z,1520542836.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:36.903Z,1520542836.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:37.297Z,1520542837.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:37.312Z,1520542837.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:37.697Z,1520542837.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:37.712Z,1520542837.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:38.097Z,1520542838.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:38.112Z,1520542838.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:38.480Z,1520542838.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:38.507Z,1520542838.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:38.891Z,1520542838.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:38.906Z,1520542838.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:39.279Z,1520542839.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:39.312Z,1520542839.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:39.677Z,1520542839.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:39.710Z,1520542839.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:40.091Z,1520542840.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:40.106Z,1520542840.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:40.501Z,1520542840.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:40.517Z,1520542840.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:40.905Z,1520542840.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:40.920Z,1520542840.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:41.301Z,1520542841.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:41.322Z,1520542841.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:41.693Z,1520542841.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:41.709Z,1520542841.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:42.076Z,1520542842.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:42.106Z,1520542842.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:42.479Z,1520542842.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:42.514Z,1520542842.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:42.892Z,1520542842.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:42.908Z,1520542842.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:43.294Z,1520542843.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:43.315Z,1520542843.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:43.705Z,1520542843.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:43.726Z,1520542843.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:44.102Z,1520542844.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:44.122Z,1520542844.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:44.473Z,1520542844.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:44.500Z,1520542844.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:44.880Z,1520542844.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:44.915Z,1520542844.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:45.283Z,1520542845.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:45.319Z,1520542845.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:45.681Z,1520542845.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:45.708Z,1520542845.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:46.099Z,1520542846.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:46.114Z,1520542846.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:46.498Z,1520542846.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:46.529Z,1520542846.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:46.905Z,1520542846.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:46.920Z,1520542846.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:47.298Z,1520542847.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:47.314Z,1520542847.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:47.679Z,1520542847.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:47.708Z,1520542847.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:48.075Z,1520542848.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:48.107Z,1520542848.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:48.478Z,1520542848.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:48.509Z,1520542848.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:48.883Z,1520542848.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:48.915Z,1520542848.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:49.293Z,1520542849.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:49.326Z,1520542849.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:49.711Z,1520542849.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:49.727Z,1520542849.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:50.110Z,1520542850.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:50.130Z,1520542850.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:50.479Z,1520542850.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:50.495Z,1520542850.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:50.886Z,1520542850.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:50.923Z,1520542850.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:51.287Z,1520542851.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:51.302Z,1520542851.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:51.686Z,1520542851.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:51.702Z,1520542851.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:52.084Z,1520542852.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:52.107Z,1520542852.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:52.502Z,1520542852.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:52.533Z,1520542852.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:52.893Z,1520542852.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:52.909Z,1520542852.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:53.301Z,1520542853.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:53.332Z,1520542853.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:53.688Z,1520542853.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:53.703Z,1520542853.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:54.083Z,1520542854.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:54.098Z,1520542854.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:54.486Z,1520542854.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:54.506Z,1520542854.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:54.888Z,1520542854.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:54.903Z,1520542854.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:55.293Z,1520542855.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:55.309Z,1520542855.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:55.693Z,1520542855.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:55.709Z,1520542855.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:56.093Z,1520542856.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:56.109Z,1520542856.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:56.489Z,1520542856.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:56.504Z,1520542856.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:56.934Z,1520542856.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:56.950Z,1520542856.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:57.288Z,1520542857.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:57.303Z,1520542857.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:57.689Z,1520542857.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:57.750Z,1520542857.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:58.088Z,1520542858.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:58.104Z,1520542858.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:58.502Z,1520542858.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:58.534Z,1520542858.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:58.889Z,1520542858.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:58.905Z,1520542858.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:59.289Z,1520542859.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:59.306Z,1520542859.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:00:59.687Z,1520542859.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:00:59.734Z,1520542859.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:00.081Z,1520542860.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:00.115Z,1520542860.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:00.492Z,1520542860.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:00.508Z,1520542860.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:00.887Z,1520542860.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:00.902Z,1520542860.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:01.296Z,1520542861.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:01.311Z,1520542861.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:01.696Z,1520542861.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:01.711Z,1520542861.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:02.097Z,1520542862.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:02.112Z,1520542862.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:02.491Z,1520542862.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:02.510Z,1520542862.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:02.891Z,1520542862.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:02.906Z,1520542862.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:03.287Z,1520542863.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:03.302Z,1520542863.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:03.687Z,1520542863.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:03.703Z,1520542863.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:04.089Z,1520542864.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:04.109Z,1520542864.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:04.496Z,1520542864.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:04.512Z,1520542864.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:04.897Z,1520542864.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:04.912Z,1520542864.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:05.296Z,1520542865.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:05.318Z,1520542865.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:05.691Z,1520542865.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:05.706Z,1520542865.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:06.091Z,1520542866.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:06.107Z,1520542866.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:06.486Z,1520542866.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:06.502Z,1520542866.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:06.894Z,1520542866.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:06.909Z,1520542866.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:07.296Z,1520542867.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:07.318Z,1520542867.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:07.696Z,1520542867.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:07.711Z,1520542867.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:08.096Z,1520542868.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:08.111Z,1520542868.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:08.491Z,1520542868.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:08.510Z,1520542868.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:08.886Z,1520542868.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:08.906Z,1520542868.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:09.283Z,1520542869.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:09.306Z,1520542869.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:09.692Z,1520542869.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:09.707Z,1520542869.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:10.087Z,1520542870.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:10.102Z,1520542870.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:10.501Z,1520542870.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:10.516Z,1520542870.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:10.902Z,1520542870.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:10.917Z,1520542870.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:11.297Z,1520542871.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:11.312Z,1520542871.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:11.692Z,1520542871.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:11.707Z,1520542871.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:12.090Z,1520542872.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:12.106Z,1520542872.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:12.483Z,1520542872.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:12.506Z,1520542872.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:12.887Z,1520542872.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:12.906Z,1520542872.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:13.300Z,1520542873.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:13.316Z,1520542873.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:13.700Z,1520542873.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:13.716Z,1520542873.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:14.101Z,1520542874.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:14.122Z,1520542874.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:14.476Z,1520542874.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:14.502Z,1520542874.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:14.887Z,1520542874.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:14.906Z,1520542874.906 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:14.907Z,1520542874.907 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 265
2018-03-08T21:01:14.907Z,1520542874.907 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T21:01:14.909Z,1520542874.909 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:14.909Z,1520542874.909 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 265
2018-03-08T21:01:14.909Z,1520542874.909 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T21:01:14.910Z,1520542874.910 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:14.911Z,1520542874.911 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 265
2018-03-08T21:01:14.911Z,1520542874.911 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T21:01:14.922Z,1520542874.922 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T21:01:14.923Z,1520542874.923 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T21:01:14.923Z,1520542874.923 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T21:01:15.321Z,1520542875.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:15.365Z,1520542875.365 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T21:01:15.365Z,1520542875.365 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 265
2018-03-08T21:01:15.365Z,1520542875.365 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T21:01:15.365Z,1520542875.365 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 265
2018-03-08T21:01:15.366Z,1520542875.366 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T21:01:15.366Z,1520542875.366 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 265
2018-03-08T21:01:15.683Z,1520542875.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:15.717Z,1520542875.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T21:01:15.718Z,1520542875.718 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:01:15.718Z,1520542875.718 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:01:15.719Z,1520542875.719 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T21:01:15.719Z,1520542875.719 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:01:15.719Z,1520542875.719 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:01:15.720Z,1520542875.720 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T21:01:15.720Z,1520542875.720 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:01:15.720Z,1520542875.720 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:01:16.079Z,1520542876.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:16.104Z,1520542876.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T21:01:16.105Z,1520542876.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:16.502Z,1520542876.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:16.517Z,1520542876.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T21:01:16.518Z,1520542876.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:16.905Z,1520542876.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:16.926Z,1520542876.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T21:01:16.927Z,1520542876.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:17.301Z,1520542877.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:17.316Z,1520542877.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T21:01:17.317Z,1520542877.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:17.683Z,1520542877.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:17.710Z,1520542877.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T21:01:17.711Z,1520542877.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:18.079Z,1520542878.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:18.104Z,1520542878.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T21:01:18.105Z,1520542878.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:18.480Z,1520542878.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:18.511Z,1520542878.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T21:01:18.516Z,1520542878.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:18.882Z,1520542878.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:18.909Z,1520542878.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T21:01:18.910Z,1520542878.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:19.301Z,1520542879.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:19.316Z,1520542879.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T21:01:19.317Z,1520542879.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:19.701Z,1520542879.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:19.715Z,1520542879.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T21:01:19.717Z,1520542879.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:20.100Z,1520542880.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:20.115Z,1520542880.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T21:01:20.116Z,1520542880.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:20.479Z,1520542880.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:20.519Z,1520542880.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T21:01:20.520Z,1520542880.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:20.879Z,1520542880.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:20.910Z,1520542880.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T21:01:20.911Z,1520542880.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:21.282Z,1520542881.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:21.315Z,1520542881.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T21:01:21.316Z,1520542881.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:21.683Z,1520542881.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:21.714Z,1520542881.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T21:01:21.715Z,1520542881.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:22.078Z,1520542882.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:22.114Z,1520542882.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T21:01:22.115Z,1520542882.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:22.503Z,1520542882.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:22.518Z,1520542882.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T21:01:22.519Z,1520542882.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:25.599Z,1520542885.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:25.614Z,1520542885.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-03-08T21:01:25.615Z,1520542885.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:25.725Z,1520542885.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:25.763Z,1520542885.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T21:01:25.764Z,1520542885.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:26.072Z,1520542886.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:26.087Z,1520542886.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T21:01:26.088Z,1520542886.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:26.469Z,1520542886.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:26.490Z,1520542886.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T21:01:26.491Z,1520542886.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:26.872Z,1520542886.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:26.887Z,1520542886.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T21:01:26.889Z,1520542886.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:27.273Z,1520542887.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:27.289Z,1520542887.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T21:01:27.290Z,1520542887.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:27.677Z,1520542887.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:27.693Z,1520542887.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T21:01:27.694Z,1520542887.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:28.085Z,1520542888.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:28.119Z,1520542888.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T21:01:28.120Z,1520542888.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:28.466Z,1520542888.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:28.494Z,1520542888.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T21:01:28.494Z,1520542888.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:28.863Z,1520542888.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:28.891Z,1520542888.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T21:01:28.892Z,1520542888.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:29.267Z,1520542889.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:29.293Z,1520542889.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T21:01:29.294Z,1520542889.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:29.663Z,1520542889.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:29.698Z,1520542889.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T21:01:29.699Z,1520542889.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:30.063Z,1520542890.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:30.095Z,1520542890.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T21:01:30.096Z,1520542890.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:30.485Z,1520542890.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:30.500Z,1520542890.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T21:01:30.501Z,1520542890.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:30.885Z,1520542890.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:30.904Z,1520542890.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T21:01:30.905Z,1520542890.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:31.285Z,1520542891.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:31.306Z,1520542891.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T21:01:31.307Z,1520542891.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:31.664Z,1520542891.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:31.694Z,1520542891.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T21:01:31.695Z,1520542891.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:32.063Z,1520542892.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:32.078Z,1520542892.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T21:01:32.079Z,1520542892.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:32.464Z,1520542892.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:32.479Z,1520542892.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T21:01:32.480Z,1520542892.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:32.870Z,1520542892.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:32.894Z,1520542892.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T21:01:32.895Z,1520542892.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:33.285Z,1520542893.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:33.310Z,1520542893.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T21:01:33.311Z,1520542893.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:33.682Z,1520542893.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:33.709Z,1520542893.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T21:01:33.710Z,1520542893.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:34.086Z,1520542894.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:34.115Z,1520542894.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T21:01:34.116Z,1520542894.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:34.468Z,1520542894.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:34.491Z,1520542894.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T21:01:34.497Z,1520542894.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:34.872Z,1520542894.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:34.888Z,1520542894.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T21:01:34.889Z,1520542894.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:35.267Z,1520542895.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:35.283Z,1520542895.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:35.670Z,1520542895.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:35.690Z,1520542895.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:36.067Z,1520542896.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:36.082Z,1520542896.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:36.474Z,1520542896.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:36.489Z,1520542896.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:36.877Z,1520542896.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:36.893Z,1520542896.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:37.285Z,1520542897.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:37.300Z,1520542897.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:37.674Z,1520542897.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:37.694Z,1520542897.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:38.074Z,1520542898.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:38.089Z,1520542898.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:38.467Z,1520542898.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:38.495Z,1520542898.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:38.870Z,1520542898.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:38.886Z,1520542898.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:39.276Z,1520542899.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:39.291Z,1520542899.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:39.677Z,1520542899.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:39.692Z,1520542899.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:40.076Z,1520542900.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:40.091Z,1520542900.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:40.471Z,1520542900.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:40.486Z,1520542900.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:40.871Z,1520542900.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:40.886Z,1520542900.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:41.274Z,1520542901.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:41.289Z,1520542901.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:41.670Z,1520542901.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:41.686Z,1520542901.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:42.059Z,1520542902.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:42.091Z,1520542902.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:42.482Z,1520542902.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:42.497Z,1520542902.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:42.884Z,1520542902.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:42.899Z,1520542902.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:43.285Z,1520542903.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:43.300Z,1520542903.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:43.675Z,1520542903.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:43.694Z,1520542903.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:44.071Z,1520542904.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:44.091Z,1520542904.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:44.460Z,1520542904.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:44.487Z,1520542904.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:44.875Z,1520542904.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:44.898Z,1520542904.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:45.285Z,1520542905.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:45.306Z,1520542905.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:45.684Z,1520542905.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:45.701Z,1520542905.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:46.083Z,1520542906.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:46.107Z,1520542906.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:46.464Z,1520542906.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:46.507Z,1520542906.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:46.871Z,1520542906.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:46.906Z,1520542906.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:47.267Z,1520542907.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:47.306Z,1520542907.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:47.703Z,1520542907.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:47.771Z,1520542907.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:48.069Z,1520542908.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:48.116Z,1520542908.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:48.507Z,1520542908.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:48.539Z,1520542908.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:48.890Z,1520542908.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:48.937Z,1520542908.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:49.285Z,1520542909.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:49.300Z,1520542909.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:49.672Z,1520542909.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:49.687Z,1520542909.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:50.071Z,1520542910.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:50.086Z,1520542910.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:50.472Z,1520542910.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:50.494Z,1520542910.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:50.871Z,1520542910.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:50.906Z,1520542910.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:51.281Z,1520542911.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:51.302Z,1520542911.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:51.685Z,1520542911.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:51.700Z,1520542911.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:52.089Z,1520542912.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:52.104Z,1520542912.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:52.475Z,1520542912.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:52.490Z,1520542912.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:52.859Z,1520542912.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:52.891Z,1520542912.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:53.275Z,1520542913.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:53.295Z,1520542913.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:53.663Z,1520542913.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:53.699Z,1520542913.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:54.063Z,1520542914.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:54.091Z,1520542914.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:54.485Z,1520542914.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:54.501Z,1520542914.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:54.884Z,1520542914.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:54.900Z,1520542914.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:55.276Z,1520542915.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:55.309Z,1520542915.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:55.667Z,1520542915.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:55.693Z,1520542915.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:56.063Z,1520542916.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:56.090Z,1520542916.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:56.463Z,1520542916.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:56.498Z,1520542916.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:56.867Z,1520542916.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:56.893Z,1520542916.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:57.282Z,1520542917.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:57.297Z,1520542917.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:57.681Z,1520542917.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:57.696Z,1520542917.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:58.086Z,1520542918.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:58.106Z,1520542918.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:58.466Z,1520542918.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:58.493Z,1520542918.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:58.867Z,1520542918.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:58.895Z,1520542918.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:59.267Z,1520542919.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:59.293Z,1520542919.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:59.663Z,1520542919.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:01:59.690Z,1520542919.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:01:59.703Z,1520542919.703 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T21:02:00.059Z,1520542920.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:00.091Z,1520542920.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:00.486Z,1520542920.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:00.501Z,1520542920.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:00.886Z,1520542920.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:00.901Z,1520542920.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:01.286Z,1520542921.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:01.301Z,1520542921.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:01.667Z,1520542921.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:01.693Z,1520542921.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:02.063Z,1520542922.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:02.090Z,1520542922.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:02.464Z,1520542922.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:02.502Z,1520542922.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:02.867Z,1520542922.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:02.895Z,1520542922.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:03.282Z,1520542923.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:03.298Z,1520542923.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:03.687Z,1520542923.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:03.702Z,1520542923.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:04.082Z,1520542924.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:04.105Z,1520542924.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:04.463Z,1520542924.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:04.499Z,1520542924.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:04.860Z,1520542924.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:04.892Z,1520542924.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:05.263Z,1520542925.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:05.299Z,1520542925.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:05.671Z,1520542925.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:05.699Z,1520542925.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:06.063Z,1520542926.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:06.104Z,1520542926.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:06.469Z,1520542926.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:06.496Z,1520542926.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:06.889Z,1520542926.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:06.906Z,1520542926.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:07.273Z,1520542927.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:07.302Z,1520542927.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:07.662Z,1520542927.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:07.693Z,1520542927.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:08.067Z,1520542928.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:08.098Z,1520542928.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:08.468Z,1520542928.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:08.483Z,1520542928.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:08.867Z,1520542928.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:08.903Z,1520542928.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:09.282Z,1520542929.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:09.310Z,1520542929.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:09.682Z,1520542929.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:09.708Z,1520542929.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:10.082Z,1520542930.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:10.107Z,1520542930.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:10.471Z,1520542930.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:10.511Z,1520542930.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:10.863Z,1520542930.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:10.878Z,1520542930.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:11.264Z,1520542931.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:11.279Z,1520542931.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:11.747Z,1520542931.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:11.771Z,1520542931.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:12.067Z,1520542932.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:12.082Z,1520542932.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:12.481Z,1520542932.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:12.515Z,1520542932.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:12.900Z,1520542932.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:12.915Z,1520542932.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:13.289Z,1520542933.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:13.315Z,1520542933.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:13.663Z,1520542933.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:13.686Z,1520542933.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:14.072Z,1520542934.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:14.087Z,1520542934.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:14.481Z,1520542934.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:14.521Z,1520542934.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:14.868Z,1520542934.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:14.883Z,1520542934.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:15.285Z,1520542935.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:15.316Z,1520542935.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:15.693Z,1520542935.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:15.718Z,1520542935.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:16.069Z,1520542936.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:16.085Z,1520542936.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:16.468Z,1520542936.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:16.487Z,1520542936.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:16.871Z,1520542936.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:16.886Z,1520542936.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:17.261Z,1520542937.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:17.288Z,1520542937.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:17.672Z,1520542937.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:17.695Z,1520542937.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:18.074Z,1520542938.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:18.089Z,1520542938.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:18.476Z,1520542938.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:18.499Z,1520542938.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:18.881Z,1520542938.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:18.896Z,1520542938.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:19.278Z,1520542939.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:19.293Z,1520542939.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:19.663Z,1520542939.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:19.690Z,1520542939.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:20.075Z,1520542940.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:20.095Z,1520542940.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:20.476Z,1520542940.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:20.491Z,1520542940.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:20.875Z,1520542940.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:20.895Z,1520542940.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:21.286Z,1520542941.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:21.405Z,1520542941.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:21.684Z,1520542941.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:21.699Z,1520542941.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:22.085Z,1520542942.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:22.100Z,1520542942.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:22.475Z,1520542942.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:22.491Z,1520542942.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:22.859Z,1520542942.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:22.887Z,1520542942.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:25.977Z,1520542945.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:25.993Z,1520542945.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:26.086Z,1520542946.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:26.129Z,1520542946.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:26.457Z,1520542946.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:26.487Z,1520542946.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:26.857Z,1520542946.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:26.881Z,1520542946.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:27.257Z,1520542947.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:27.287Z,1520542947.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:27.644Z,1520542947.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:27.659Z,1520542947.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:28.046Z,1520542948.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:28.061Z,1520542948.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:28.444Z,1520542948.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:28.459Z,1520542948.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:28.851Z,1520542948.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:28.887Z,1520542948.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:29.261Z,1520542949.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:29.293Z,1520542949.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:29.661Z,1520542949.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:29.692Z,1520542949.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:30.061Z,1520542950.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:30.092Z,1520542950.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:30.442Z,1520542950.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:30.462Z,1520542950.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:30.848Z,1520542950.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:30.864Z,1520542950.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:31.248Z,1520542951.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:31.270Z,1520542951.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:31.648Z,1520542951.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:31.663Z,1520542951.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:32.048Z,1520542952.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:32.063Z,1520542952.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:32.461Z,1520542952.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:32.476Z,1520542952.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:32.857Z,1520542952.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:32.872Z,1520542952.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:33.253Z,1520542953.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:33.269Z,1520542953.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:33.650Z,1520542953.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:33.670Z,1520542953.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:34.050Z,1520542954.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:34.065Z,1520542954.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:34.450Z,1520542954.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:34.465Z,1520542954.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:34.847Z,1520542954.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:34.866Z,1520542954.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:35.253Z,1520542955.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:35.268Z,1520542955.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:35.655Z,1520542955.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:35.670Z,1520542955.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:36.053Z,1520542956.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:36.069Z,1520542956.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:36.451Z,1520542956.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:36.466Z,1520542956.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:36.850Z,1520542956.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:36.866Z,1520542956.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:37.251Z,1520542957.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:37.266Z,1520542957.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:37.648Z,1520542957.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:37.663Z,1520542957.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:38.049Z,1520542958.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:38.064Z,1520542958.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:38.465Z,1520542958.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:38.501Z,1520542958.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:38.857Z,1520542958.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:38.871Z,1520542958.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:39.257Z,1520542959.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:39.273Z,1520542959.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:39.647Z,1520542959.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:39.663Z,1520542959.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:40.048Z,1520542960.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:40.063Z,1520542960.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:40.449Z,1520542960.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:40.470Z,1520542960.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:40.851Z,1520542960.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:40.870Z,1520542960.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:41.259Z,1520542961.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:41.274Z,1520542961.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:41.658Z,1520542961.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:41.673Z,1520542961.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:42.057Z,1520542962.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:42.078Z,1520542962.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:42.453Z,1520542962.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:42.468Z,1520542962.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:42.851Z,1520542962.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:42.867Z,1520542962.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:43.252Z,1520542963.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:43.268Z,1520542963.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:43.650Z,1520542963.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:43.665Z,1520542963.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:44.052Z,1520542964.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:44.068Z,1520542964.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:44.457Z,1520542964.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:44.472Z,1520542964.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:44.857Z,1520542964.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:44.872Z,1520542964.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:45.254Z,1520542965.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:45.277Z,1520542965.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:45.653Z,1520542965.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:45.668Z,1520542965.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:46.039Z,1520542966.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:46.074Z,1520542966.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:46.435Z,1520542966.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:46.462Z,1520542966.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:46.838Z,1520542966.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:46.871Z,1520542966.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:47.257Z,1520542967.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:47.273Z,1520542967.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:47.657Z,1520542967.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:47.673Z,1520542967.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:48.058Z,1520542968.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:48.074Z,1520542968.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:48.451Z,1520542968.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:48.466Z,1520542968.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:48.850Z,1520542968.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:48.870Z,1520542968.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:49.238Z,1520542969.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:49.270Z,1520542969.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:49.635Z,1520542969.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:49.662Z,1520542969.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:50.036Z,1520542970.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:50.071Z,1520542970.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:50.457Z,1520542970.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:50.472Z,1520542970.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:50.865Z,1520542970.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:50.880Z,1520542970.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:51.257Z,1520542971.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:51.273Z,1520542971.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:51.638Z,1520542971.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:51.670Z,1520542971.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:52.038Z,1520542972.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:52.067Z,1520542972.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:52.442Z,1520542972.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:52.469Z,1520542972.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:52.839Z,1520542972.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:52.866Z,1520542972.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:53.262Z,1520542973.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:53.277Z,1520542973.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:53.656Z,1520542973.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:53.675Z,1520542973.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:54.062Z,1520542974.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:54.077Z,1520542974.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:54.435Z,1520542974.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:54.467Z,1520542974.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:54.843Z,1520542974.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:54.874Z,1520542974.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:55.238Z,1520542975.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:55.265Z,1520542975.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:55.644Z,1520542975.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:55.670Z,1520542975.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:56.043Z,1520542976.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:56.069Z,1520542976.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:56.457Z,1520542976.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:56.472Z,1520542976.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:56.858Z,1520542976.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:56.873Z,1520542976.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:57.253Z,1520542977.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:57.268Z,1520542977.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:57.639Z,1520542977.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:57.666Z,1520542977.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:58.039Z,1520542978.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:58.066Z,1520542978.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:58.443Z,1520542978.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:58.470Z,1520542978.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:58.839Z,1520542978.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:58.865Z,1520542978.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:59.256Z,1520542979.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:59.280Z,1520542979.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:02:59.654Z,1520542979.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:02:59.673Z,1520542979.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:00.057Z,1520542980.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:00.073Z,1520542980.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:00.439Z,1520542980.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:00.476Z,1520542980.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:00.843Z,1520542980.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:00.869Z,1520542980.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:01.255Z,1520542981.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:01.274Z,1520542981.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:01.639Z,1520542981.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:01.667Z,1520542981.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:02.043Z,1520542982.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:02.069Z,1520542982.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:02.459Z,1520542982.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:02.474Z,1520542982.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:02.861Z,1520542982.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:02.876Z,1520542982.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:03.253Z,1520542983.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:03.269Z,1520542983.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:03.638Z,1520542983.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:03.665Z,1520542983.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:04.034Z,1520542984.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:04.072Z,1520542984.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:04.443Z,1520542984.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:04.471Z,1520542984.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:04.838Z,1520542984.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:04.865Z,1520542984.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:05.262Z,1520542985.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:05.277Z,1520542985.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:05.658Z,1520542985.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:05.673Z,1520542985.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:06.057Z,1520542986.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:06.072Z,1520542986.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:06.435Z,1520542986.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:06.467Z,1520542986.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:06.843Z,1520542986.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:06.869Z,1520542986.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:07.239Z,1520542987.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:07.266Z,1520542987.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:07.639Z,1520542987.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:07.667Z,1520542987.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:08.035Z,1520542988.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:08.067Z,1520542988.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:08.461Z,1520542988.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:08.477Z,1520542988.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:08.858Z,1520542988.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:08.873Z,1520542988.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:09.245Z,1520542989.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:09.279Z,1520542989.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:09.642Z,1520542989.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:09.669Z,1520542989.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:10.039Z,1520542990.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:10.072Z,1520542990.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:10.443Z,1520542990.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:10.470Z,1520542990.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:10.842Z,1520542990.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:10.868Z,1520542990.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:11.259Z,1520542991.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:11.274Z,1520542991.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:11.657Z,1520542991.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:11.673Z,1520542991.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:12.053Z,1520542992.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:12.077Z,1520542992.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:12.439Z,1520542992.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:12.471Z,1520542992.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:12.843Z,1520542992.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:12.870Z,1520542992.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:13.239Z,1520542993.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:13.270Z,1520542993.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:13.635Z,1520542993.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:13.671Z,1520542993.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:14.043Z,1520542994.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:14.070Z,1520542994.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:14.457Z,1520542994.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:14.473Z,1520542994.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:14.870Z,1520542994.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:14.890Z,1520542994.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:15.249Z,1520542995.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:15.282Z,1520542995.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:15.639Z,1520542995.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:15.675Z,1520542995.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:16.035Z,1520542996.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:16.078Z,1520542996.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:16.437Z,1520542996.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:16.474Z,1520542996.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:16.843Z,1520542996.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:16.875Z,1520542996.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:17.262Z,1520542997.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:17.277Z,1520542997.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:17.649Z,1520542997.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:17.687Z,1520542997.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:18.053Z,1520542998.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:18.082Z,1520542998.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:18.447Z,1520542998.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:18.473Z,1520542998.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:18.843Z,1520542998.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:18.871Z,1520542998.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:19.241Z,1520542999.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:19.256Z,1520542999.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:19.642Z,1520542999.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:19.657Z,1520542999.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:20.041Z,1520543000.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:20.057Z,1520543000.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:20.458Z,1520543000.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:20.486Z,1520543000.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:20.861Z,1520543000.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:20.888Z,1520543000.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:21.245Z,1520543001.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:21.282Z,1520543001.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:21.645Z,1520543001.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:21.661Z,1520543001.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:22.046Z,1520543002.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:22.062Z,1520543002.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:22.441Z,1520543002.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:22.456Z,1520543002.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:22.847Z,1520543002.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:22.863Z,1520543002.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:23.256Z,1520543003.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:23.271Z,1520543003.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:26.361Z,1520543006.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:26.397Z,1520543006.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:26.496Z,1520543006.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:26.544Z,1520543006.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:26.859Z,1520543006.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:26.875Z,1520543006.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:27.263Z,1520543007.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:27.279Z,1520543007.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:27.663Z,1520543007.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:27.679Z,1520543007.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:28.058Z,1520543008.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:28.085Z,1520543008.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:28.473Z,1520543008.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:28.490Z,1520543008.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:28.873Z,1520543008.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:28.888Z,1520543008.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:29.269Z,1520543009.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:29.284Z,1520543009.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:29.666Z,1520543009.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:29.681Z,1520543009.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:30.062Z,1520543010.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:30.078Z,1520543010.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:30.468Z,1520543010.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:30.511Z,1520543010.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:30.862Z,1520543010.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:30.882Z,1520543010.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:31.269Z,1520543011.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:31.285Z,1520543011.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:31.669Z,1520543011.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:31.684Z,1520543011.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:32.069Z,1520543012.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:32.084Z,1520543012.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:32.458Z,1520543012.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:32.474Z,1520543012.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:32.861Z,1520543012.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:32.889Z,1520543012.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:33.267Z,1520543013.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:33.286Z,1520543013.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:33.667Z,1520543013.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:33.682Z,1520543013.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:34.067Z,1520543014.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:34.090Z,1520543014.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:34.469Z,1520543014.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:34.484Z,1520543014.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:34.872Z,1520543014.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:34.887Z,1520543014.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:35.274Z,1520543015.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:35.295Z,1520543015.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:35.667Z,1520543015.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:35.690Z,1520543015.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:36.067Z,1520543016.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:36.082Z,1520543016.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:36.461Z,1520543016.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:36.489Z,1520543016.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:36.866Z,1520543016.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:36.882Z,1520543016.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:37.268Z,1520543017.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:37.289Z,1520543017.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:37.678Z,1520543017.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:37.693Z,1520543017.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:38.077Z,1520543018.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:38.093Z,1520543018.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:38.450Z,1520543018.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:38.482Z,1520543018.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:38.867Z,1520543018.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:38.882Z,1520543018.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:39.255Z,1520543019.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:39.290Z,1520543019.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:39.667Z,1520543019.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:39.682Z,1520543019.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:40.056Z,1520543020.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:40.084Z,1520543020.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:40.470Z,1520543020.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:40.497Z,1520543020.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:40.881Z,1520543020.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:40.896Z,1520543020.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:41.279Z,1520543021.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:41.299Z,1520543021.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:41.655Z,1520543021.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:41.695Z,1520543021.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:42.056Z,1520543022.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:42.072Z,1520543022.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:42.469Z,1520543022.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:42.484Z,1520543022.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:42.865Z,1520543022.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:42.889Z,1520543022.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:43.268Z,1520543023.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:43.283Z,1520543023.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:43.669Z,1520543023.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:43.705Z,1520543023.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:44.071Z,1520543024.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:44.116Z,1520543024.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:44.462Z,1520543024.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:44.517Z,1520543024.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:44.869Z,1520543024.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:44.884Z,1520543024.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:45.263Z,1520543025.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:45.299Z,1520543025.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:45.663Z,1520543025.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:45.679Z,1520543025.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:46.067Z,1520543026.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:46.090Z,1520543026.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:46.477Z,1520543026.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:46.498Z,1520543026.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:46.881Z,1520543026.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:46.896Z,1520543026.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:47.278Z,1520543027.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:47.293Z,1520543027.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:47.655Z,1520543027.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:47.691Z,1520543027.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:48.067Z,1520543028.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:48.082Z,1520543028.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:48.455Z,1520543028.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:48.483Z,1520543028.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:48.855Z,1520543028.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:48.892Z,1520543028.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:49.273Z,1520543029.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:49.288Z,1520543029.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:49.681Z,1520543029.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:49.702Z,1520543029.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:50.077Z,1520543030.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:50.092Z,1520543030.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:50.454Z,1520543030.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:50.486Z,1520543030.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:50.855Z,1520543030.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:50.891Z,1520543030.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:51.259Z,1520543031.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:51.286Z,1520543031.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:51.655Z,1520543031.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:51.679Z,1520543031.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:52.059Z,1520543032.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:52.086Z,1520543032.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:52.473Z,1520543032.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:52.493Z,1520543032.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:52.877Z,1520543032.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:52.892Z,1520543032.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:53.273Z,1520543033.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:53.296Z,1520543033.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:53.655Z,1520543033.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:53.691Z,1520543033.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:54.058Z,1520543034.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:54.090Z,1520543034.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:54.463Z,1520543034.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:54.491Z,1520543034.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:54.855Z,1520543034.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:54.892Z,1520543034.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:55.265Z,1520543035.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:55.291Z,1520543035.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:55.673Z,1520543035.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:55.697Z,1520543035.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:56.065Z,1520543036.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:56.103Z,1520543036.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:56.455Z,1520543036.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:56.470Z,1520543036.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:56.856Z,1520543036.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:56.871Z,1520543036.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:57.263Z,1520543037.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:57.298Z,1520543037.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:57.660Z,1520543037.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:57.675Z,1520543037.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:58.067Z,1520543038.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:58.103Z,1520543038.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:58.474Z,1520543038.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:58.505Z,1520543038.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:58.877Z,1520543038.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:58.892Z,1520543038.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:59.270Z,1520543039.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:59.286Z,1520543039.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:03:59.668Z,1520543039.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:03:59.684Z,1520543039.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:00.065Z,1520543040.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:00.080Z,1520543040.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:00.465Z,1520543040.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:00.481Z,1520543040.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:00.867Z,1520543040.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:00.883Z,1520543040.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:01.269Z,1520543041.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:01.285Z,1520543041.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:01.669Z,1520543041.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:01.684Z,1520543041.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:02.070Z,1520543042.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:02.085Z,1520543042.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:02.457Z,1520543042.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:02.472Z,1520543042.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:02.864Z,1520543042.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:02.880Z,1520543042.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:03.259Z,1520543043.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:03.275Z,1520543043.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:03.653Z,1520543043.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:03.669Z,1520543043.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:04.059Z,1520543044.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:04.075Z,1520543044.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:04.486Z,1520543044.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:04.520Z,1520543044.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:04.874Z,1520543044.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:04.889Z,1520543044.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:05.269Z,1520543045.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:05.285Z,1520543045.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:05.655Z,1520543045.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:05.675Z,1520543045.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:06.058Z,1520543046.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:06.075Z,1520543046.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:06.455Z,1520543046.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:06.494Z,1520543046.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:06.855Z,1520543046.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:06.879Z,1520543046.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:07.273Z,1520543047.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:07.289Z,1520543047.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:07.676Z,1520543047.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:07.695Z,1520543047.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:08.076Z,1520543048.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:08.092Z,1520543048.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:08.465Z,1520543048.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:08.481Z,1520543048.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:08.864Z,1520543048.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:08.886Z,1520543048.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:09.261Z,1520543049.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:09.282Z,1520543049.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:09.663Z,1520543049.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:09.678Z,1520543049.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:10.064Z,1520543050.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:10.079Z,1520543050.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:10.477Z,1520543050.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:10.492Z,1520543050.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:10.876Z,1520543050.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:10.891Z,1520543050.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:11.276Z,1520543051.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:11.291Z,1520543051.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:11.666Z,1520543051.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:11.686Z,1520543051.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:12.065Z,1520543052.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:12.082Z,1520543052.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:12.464Z,1520543052.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:12.486Z,1520543052.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:12.864Z,1520543052.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:12.879Z,1520543052.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:13.273Z,1520543053.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:13.294Z,1520543053.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:13.676Z,1520543053.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:13.698Z,1520543053.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:14.073Z,1520543054.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:14.089Z,1520543054.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:14.466Z,1520543054.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:14.482Z,1520543054.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:14.863Z,1520543054.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:14.887Z,1520543054.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:15.267Z,1520543055.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:15.286Z,1520543055.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:15.668Z,1520543055.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:15.683Z,1520543055.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:16.063Z,1520543056.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:16.082Z,1520543056.082 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:16.082Z,1520543056.082 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 266
2018-03-08T21:04:16.082Z,1520543056.082 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T21:04:16.084Z,1520543056.084 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:16.084Z,1520543056.084 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 266
2018-03-08T21:04:16.084Z,1520543056.084 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T21:04:16.086Z,1520543056.086 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:16.086Z,1520543056.086 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 266
2018-03-08T21:04:16.086Z,1520543056.086 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T21:04:16.097Z,1520543056.097 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T21:04:16.098Z,1520543056.098 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T21:04:16.098Z,1520543056.098 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T21:04:16.473Z,1520543056.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:16.499Z,1520543056.499 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T21:04:16.499Z,1520543056.499 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 266
2018-03-08T21:04:16.500Z,1520543056.500 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T21:04:16.500Z,1520543056.500 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 266
2018-03-08T21:04:16.500Z,1520543056.500 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T21:04:16.500Z,1520543056.500 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 266
2018-03-08T21:04:16.875Z,1520543056.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:16.894Z,1520543056.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T21:04:16.895Z,1520543056.895 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:04:16.895Z,1520543056.895 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:04:16.895Z,1520543056.895 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T21:04:16.896Z,1520543056.896 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:04:16.896Z,1520543056.896 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:04:16.900Z,1520543056.900 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T21:04:16.901Z,1520543056.901 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:04:16.901Z,1520543056.901 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:04:17.278Z,1520543057.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:17.298Z,1520543057.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T21:04:17.299Z,1520543057.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:17.659Z,1520543057.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:17.692Z,1520543057.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T21:04:17.693Z,1520543057.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:18.054Z,1520543058.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:18.085Z,1520543058.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T21:04:18.086Z,1520543058.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:18.459Z,1520543058.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:18.497Z,1520543058.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T21:04:18.498Z,1520543058.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:18.859Z,1520543058.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:18.895Z,1520543058.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T21:04:18.896Z,1520543058.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:19.265Z,1520543059.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:19.291Z,1520543059.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T21:04:19.292Z,1520543059.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:19.669Z,1520543059.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:19.702Z,1520543059.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T21:04:19.703Z,1520543059.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:20.069Z,1520543060.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:20.096Z,1520543060.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T21:04:20.097Z,1520543060.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:20.454Z,1520543060.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:20.469Z,1520543060.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T21:04:20.470Z,1520543060.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:20.859Z,1520543060.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:20.873Z,1520543060.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T21:04:20.874Z,1520543060.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:21.259Z,1520543061.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:21.278Z,1520543061.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T21:04:21.279Z,1520543061.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:21.663Z,1520543061.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:21.679Z,1520543061.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T21:04:21.680Z,1520543061.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:22.063Z,1520543062.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:22.078Z,1520543062.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T21:04:22.079Z,1520543062.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:22.473Z,1520543062.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:22.488Z,1520543062.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T21:04:22.505Z,1520543062.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:22.877Z,1520543062.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:22.892Z,1520543062.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T21:04:22.909Z,1520543062.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:23.273Z,1520543063.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:23.294Z,1520543063.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T21:04:23.295Z,1520543063.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:26.528Z,1520543066.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:26.564Z,1520543066.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-08T21:04:26.565Z,1520543066.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:26.666Z,1520543066.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:26.711Z,1520543066.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2018-03-08T21:04:26.711Z,1520543066.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:27.037Z,1520543067.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:27.059Z,1520543067.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2018-03-08T21:04:27.060Z,1520543067.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:27.421Z,1520543067.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:27.438Z,1520543067.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2018-03-08T21:04:27.439Z,1520543067.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:27.825Z,1520543067.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:27.841Z,1520543067.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2018-03-08T21:04:27.842Z,1520543067.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:28.218Z,1520543068.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:28.234Z,1520543068.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2018-03-08T21:04:28.235Z,1520543068.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:28.616Z,1520543068.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:28.638Z,1520543068.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2018-03-08T21:04:28.639Z,1520543068.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:29.020Z,1520543069.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:29.035Z,1520543069.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2018-03-08T21:04:29.036Z,1520543069.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:29.421Z,1520543069.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:29.436Z,1520543069.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2018-03-08T21:04:29.437Z,1520543069.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:29.833Z,1520543069.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:29.847Z,1520543069.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2018-03-08T21:04:29.872Z,1520543069.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:30.221Z,1520543070.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:30.236Z,1520543070.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2018-03-08T21:04:30.237Z,1520543070.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:30.618Z,1520543070.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:30.633Z,1520543070.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2018-03-08T21:04:30.634Z,1520543070.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:31.015Z,1520543071.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:31.034Z,1520543071.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2018-03-08T21:04:31.035Z,1520543071.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:31.420Z,1520543071.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:31.435Z,1520543071.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2018-03-08T21:04:31.436Z,1520543071.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:31.818Z,1520543071.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:31.834Z,1520543071.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-03-08T21:04:31.835Z,1520543071.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:32.225Z,1520543072.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:32.240Z,1520543072.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-03-08T21:04:32.241Z,1520543072.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:32.624Z,1520543072.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:32.646Z,1520543072.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-03-08T21:04:32.647Z,1520543072.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:33.026Z,1520543073.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:33.046Z,1520543073.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-03-08T21:04:33.047Z,1520543073.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:33.424Z,1520543073.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:33.439Z,1520543073.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-03-08T21:04:33.440Z,1520543073.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:33.819Z,1520543073.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:33.838Z,1520543073.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-03-08T21:04:33.839Z,1520543073.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:34.228Z,1520543074.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:34.243Z,1520543074.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-03-08T21:04:34.244Z,1520543074.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:34.628Z,1520543074.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:34.650Z,1520543074.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-03-08T21:04:34.651Z,1520543074.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:35.029Z,1520543075.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:35.045Z,1520543075.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-03-08T21:04:35.045Z,1520543075.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:35.424Z,1520543075.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:35.439Z,1520543075.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-03-08T21:04:35.439Z,1520543075.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:35.821Z,1520543075.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:35.836Z,1520543075.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-03-08T21:04:35.837Z,1520543075.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:36.229Z,1520543076.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:36.245Z,1520543076.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:36.632Z,1520543076.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:36.647Z,1520543076.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:37.033Z,1520543077.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:37.048Z,1520543077.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:37.424Z,1520543077.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:37.439Z,1520543077.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:37.820Z,1520543077.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:37.842Z,1520543077.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:38.233Z,1520543078.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:38.254Z,1520543078.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:38.626Z,1520543078.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:38.641Z,1520543078.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:39.032Z,1520543079.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:39.047Z,1520543079.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:39.424Z,1520543079.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:39.446Z,1520543079.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:39.823Z,1520543079.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:39.839Z,1520543079.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:40.229Z,1520543080.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:40.244Z,1520543080.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:40.633Z,1520543080.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:40.654Z,1520543080.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:41.032Z,1520543081.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:41.048Z,1520543081.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:41.417Z,1520543081.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:41.445Z,1520543081.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:41.815Z,1520543081.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:41.844Z,1520543081.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:42.233Z,1520543082.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:42.254Z,1520543082.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:42.634Z,1520543082.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:42.649Z,1520543082.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:43.032Z,1520543083.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:43.059Z,1520543083.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:43.407Z,1520543083.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:43.439Z,1520543083.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:43.814Z,1520543083.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:43.841Z,1520543083.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:44.232Z,1520543084.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:44.255Z,1520543084.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:44.628Z,1520543084.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:44.651Z,1520543084.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:45.030Z,1520543085.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:45.045Z,1520543085.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:45.411Z,1520543085.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:45.441Z,1520543085.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:45.815Z,1520543085.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:45.846Z,1520543085.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:46.230Z,1520543086.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:46.245Z,1520543086.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:46.634Z,1520543086.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:46.650Z,1520543086.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:47.026Z,1520543087.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:47.053Z,1520543087.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:47.416Z,1520543087.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:47.450Z,1520543087.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:47.811Z,1520543087.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:47.839Z,1520543087.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:48.234Z,1520543088.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:48.249Z,1520543088.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:48.632Z,1520543088.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:48.654Z,1520543088.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:49.038Z,1520543089.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:49.053Z,1520543089.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:49.407Z,1520543089.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:49.432Z,1520543089.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:49.814Z,1520543089.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:49.847Z,1520543089.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:50.236Z,1520543090.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:50.251Z,1520543090.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:50.621Z,1520543090.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:50.654Z,1520543090.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:51.033Z,1520543091.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:51.049Z,1520543091.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:51.411Z,1520543091.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:51.444Z,1520543091.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:51.811Z,1520543091.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:51.851Z,1520543091.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:52.225Z,1520543092.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:52.252Z,1520543092.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:52.643Z,1520543092.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:52.666Z,1520543092.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:53.021Z,1520543093.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:53.057Z,1520543093.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:53.419Z,1520543093.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:53.435Z,1520543093.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:53.816Z,1520543093.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:53.831Z,1520543093.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:54.233Z,1520543094.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:54.256Z,1520543094.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:54.629Z,1520543094.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:54.658Z,1520543094.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:55.029Z,1520543095.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:55.058Z,1520543095.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:55.410Z,1520543095.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:55.434Z,1520543095.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:55.818Z,1520543095.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:55.842Z,1520543095.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:56.226Z,1520543096.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:56.247Z,1520543096.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:56.630Z,1520543096.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:56.651Z,1520543096.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:57.030Z,1520543097.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:57.045Z,1520543097.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:57.412Z,1520543097.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:57.445Z,1520543097.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:57.823Z,1520543097.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:57.840Z,1520543097.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:58.229Z,1520543098.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:58.251Z,1520543098.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:58.634Z,1520543098.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:58.650Z,1520543098.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:59.022Z,1520543099.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:59.050Z,1520543099.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:59.423Z,1520543099.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:59.440Z,1520543099.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:04:59.811Z,1520543099.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:04:59.851Z,1520543099.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:00.234Z,1520543100.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:00.250Z,1520543100.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:00.631Z,1520543100.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:00.656Z,1520543100.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:01.024Z,1520543101.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:01.053Z,1520543101.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:01.411Z,1520543101.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:01.447Z,1520543101.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:01.818Z,1520543101.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:01.845Z,1520543101.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:02.235Z,1520543102.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:02.250Z,1520543102.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:02.633Z,1520543102.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:02.652Z,1520543102.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:03.033Z,1520543103.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:03.048Z,1520543103.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:03.411Z,1520543103.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:03.447Z,1520543103.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:03.812Z,1520543103.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:03.843Z,1520543103.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:04.221Z,1520543104.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:04.248Z,1520543104.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:04.625Z,1520543104.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:04.653Z,1520543104.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:05.025Z,1520543105.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:05.052Z,1520543105.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:05.411Z,1520543105.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:05.427Z,1520543105.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:05.814Z,1520543105.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:05.830Z,1520543105.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:06.225Z,1520543106.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:06.251Z,1520543106.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:06.629Z,1520543106.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:06.659Z,1520543106.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:07.024Z,1520543107.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:07.059Z,1520543107.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:07.415Z,1520543107.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:07.431Z,1520543107.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:07.818Z,1520543107.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:07.858Z,1520543107.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:08.225Z,1520543108.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:08.240Z,1520543108.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:08.633Z,1520543108.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:08.658Z,1520543108.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:09.029Z,1520543109.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:09.060Z,1520543109.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:09.416Z,1520543109.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:09.431Z,1520543109.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:09.819Z,1520543109.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:09.843Z,1520543109.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:10.233Z,1520543110.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:10.265Z,1520543110.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:10.630Z,1520543110.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:10.645Z,1520543110.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:11.028Z,1520543111.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:11.070Z,1520543111.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:11.422Z,1520543111.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:11.437Z,1520543111.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:11.819Z,1520543111.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:11.842Z,1520543111.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:12.228Z,1520543112.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:12.247Z,1520543112.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:12.629Z,1520543112.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:12.645Z,1520543112.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:13.029Z,1520543113.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:13.044Z,1520543113.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:13.425Z,1520543113.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:13.441Z,1520543113.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:13.823Z,1520543113.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:13.838Z,1520543113.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:14.230Z,1520543114.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:14.245Z,1520543114.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:14.629Z,1520543114.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:14.645Z,1520543114.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:15.028Z,1520543115.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:15.043Z,1520543115.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:15.420Z,1520543115.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:15.436Z,1520543115.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:15.819Z,1520543115.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:15.834Z,1520543115.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:16.228Z,1520543116.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:16.244Z,1520543116.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:16.628Z,1520543116.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:16.643Z,1520543116.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:17.028Z,1520543117.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:17.043Z,1520543117.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:17.419Z,1520543117.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:17.435Z,1520543117.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:17.819Z,1520543117.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:17.834Z,1520543117.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:18.228Z,1520543118.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:18.243Z,1520543118.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:18.628Z,1520543118.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:18.643Z,1520543118.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:19.028Z,1520543119.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:19.043Z,1520543119.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:19.424Z,1520543119.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:19.439Z,1520543119.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:19.822Z,1520543119.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:19.843Z,1520543119.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:20.229Z,1520543120.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:20.245Z,1520543120.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:20.629Z,1520543120.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:20.645Z,1520543120.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:21.028Z,1520543121.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:21.044Z,1520543121.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:21.420Z,1520543121.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:21.435Z,1520543121.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:21.819Z,1520543121.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:21.834Z,1520543121.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:22.229Z,1520543122.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:22.245Z,1520543122.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:22.248Z,1520543122.248 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T21:05:22.248Z,1520543122.248 [Default:CheckIn:C.Wait] Stopped
2018-03-08T21:05:22.248Z,1520543122.248 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T21:05:22.248Z,1520543122.248 [Default:CheckIn:D] Running Loop=1
2018-03-08T21:05:22.632Z,1520543122.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:22.647Z,1520543122.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:22.650Z,1520543122.650 [Default:CheckIn:D] Stopped
2018-03-08T21:05:22.650Z,1520543122.650 [Default:CheckIn:E] Running Loop=1
2018-03-08T21:05:23.033Z,1520543123.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:23.048Z,1520543123.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:23.051Z,1520543123.051 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 799.630729 min 
2018-03-08T21:05:23.052Z,1520543123.052 [Default:CheckIn:E] Stopped
2018-03-08T21:05:23.052Z,1520543123.052 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T21:05:23.052Z,1520543123.052 [Default:CheckIn] Stopped
2018-03-08T21:05:23.052Z,1520543123.052 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T21:05:23.052Z,1520543123.052 [Default:CheckIn](INFO): Running loop #78
2018-03-08T21:05:23.052Z,1520543123.052 [Default:CheckIn] Running Loop=78
2018-03-08T21:05:23.053Z,1520543123.053 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T21:05:23.053Z,1520543123.053 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T21:05:23.411Z,1520543123.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:23.451Z,1520543123.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:26.522Z,1520543126.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:26.538Z,1520543126.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:26.645Z,1520543126.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:26.692Z,1520543126.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:27.009Z,1520543127.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:27.038Z,1520543127.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:27.420Z,1520543127.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:27.435Z,1520543127.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:27.796Z,1520543127.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:27.811Z,1520543127.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:28.194Z,1520543128.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:28.209Z,1520543128.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:28.588Z,1520543128.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:28.603Z,1520543128.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:28.997Z,1520543128.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:29.013Z,1520543129.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:29.409Z,1520543129.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:29.440Z,1520543129.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:29.806Z,1520543129.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:29.833Z,1520543129.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:30.209Z,1520543130.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:30.241Z,1520543130.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:30.596Z,1520543130.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:30.611Z,1520543130.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:30.998Z,1520543130.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:31.013Z,1520543131.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:31.401Z,1520543131.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:31.416Z,1520543131.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:31.800Z,1520543131.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:31.816Z,1520543131.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:32.213Z,1520543132.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:32.228Z,1520543132.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:32.598Z,1520543132.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:32.627Z,1520543132.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:33.006Z,1520543133.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:33.026Z,1520543133.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:33.398Z,1520543133.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:33.413Z,1520543133.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:33.785Z,1520543133.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:33.819Z,1520543133.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:34.207Z,1520543134.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:34.230Z,1520543134.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:34.615Z,1520543134.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:34.630Z,1520543134.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:35.010Z,1520543135.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:35.030Z,1520543135.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:35.401Z,1520543135.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:35.416Z,1520543135.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:35.786Z,1520543135.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:35.819Z,1520543135.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:36.206Z,1520543136.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:36.221Z,1520543136.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:36.610Z,1520543136.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:36.631Z,1520543136.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:37.010Z,1520543137.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:37.026Z,1520543137.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:37.400Z,1520543137.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:37.415Z,1520543137.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:37.786Z,1520543137.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:37.818Z,1520543137.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:38.209Z,1520543138.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:38.225Z,1520543138.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:38.605Z,1520543138.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:38.621Z,1520543138.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:39.005Z,1520543139.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:39.021Z,1520543139.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:39.388Z,1520543139.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:39.414Z,1520543139.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:39.784Z,1520543139.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:39.818Z,1520543139.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:40.209Z,1520543140.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:40.224Z,1520543140.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:40.612Z,1520543140.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:40.627Z,1520543140.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:41.012Z,1520543141.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:41.027Z,1520543141.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:41.399Z,1520543141.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:41.415Z,1520543141.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:41.787Z,1520543141.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:41.819Z,1520543141.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:42.196Z,1520543142.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:42.229Z,1520543142.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:42.613Z,1520543142.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:42.628Z,1520543142.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:43.033Z,1520543143.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:43.078Z,1520543143.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:43.390Z,1520543143.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:43.424Z,1520543143.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:43.788Z,1520543143.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:43.819Z,1520543143.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:44.199Z,1520543144.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:44.276Z,1520543144.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:44.610Z,1520543144.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:44.626Z,1520543144.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:45.019Z,1520543145.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:45.039Z,1520543145.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:45.387Z,1520543145.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:45.424Z,1520543145.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:45.790Z,1520543145.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:45.822Z,1520543145.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:46.213Z,1520543146.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:46.241Z,1520543146.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:46.603Z,1520543146.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:46.650Z,1520543146.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:47.001Z,1520543147.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:47.034Z,1520543147.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:47.399Z,1520543147.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:47.426Z,1520543147.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:47.787Z,1520543147.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:47.830Z,1520543147.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:48.194Z,1520543148.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:48.226Z,1520543148.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:48.617Z,1520543148.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:48.632Z,1520543148.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:49.002Z,1520543149.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:49.036Z,1520543149.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:49.391Z,1520543149.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:49.427Z,1520543149.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:49.788Z,1520543149.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:49.803Z,1520543149.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:50.209Z,1520543150.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:50.235Z,1520543150.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:50.597Z,1520543150.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:50.625Z,1520543150.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:51.014Z,1520543151.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:51.047Z,1520543151.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:51.392Z,1520543151.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:51.407Z,1520543151.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:51.789Z,1520543151.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:51.804Z,1520543151.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:52.205Z,1520543152.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:52.241Z,1520543152.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:52.605Z,1520543152.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:52.620Z,1520543152.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:52.997Z,1520543152.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:53.013Z,1520543153.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:53.394Z,1520543153.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:53.412Z,1520543153.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:53.797Z,1520543153.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:53.812Z,1520543153.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:54.197Z,1520543154.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:54.212Z,1520543154.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:54.601Z,1520543154.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:54.616Z,1520543154.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:55.001Z,1520543155.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:55.040Z,1520543155.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:55.397Z,1520543155.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:55.412Z,1520543155.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:55.796Z,1520543155.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:55.818Z,1520543155.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:56.213Z,1520543156.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:56.245Z,1520543156.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:56.597Z,1520543156.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:56.612Z,1520543156.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:56.997Z,1520543156.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:57.013Z,1520543157.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:57.395Z,1520543157.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:57.410Z,1520543157.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:57.788Z,1520543157.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:57.811Z,1520543157.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:58.201Z,1520543158.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:58.217Z,1520543158.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:58.605Z,1520543158.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:58.620Z,1520543158.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:58.998Z,1520543158.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:59.025Z,1520543159.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:59.398Z,1520543159.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:59.413Z,1520543159.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:05:59.795Z,1520543159.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:05:59.810Z,1520543159.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:00.202Z,1520543160.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:00.225Z,1520543160.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:00.609Z,1520543160.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:00.624Z,1520543160.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:01.008Z,1520543161.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:01.029Z,1520543161.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:01.401Z,1520543161.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:01.416Z,1520543161.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:01.795Z,1520543161.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:01.814Z,1520543161.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:02.210Z,1520543162.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:02.225Z,1520543162.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:02.605Z,1520543162.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:02.621Z,1520543162.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:02.997Z,1520543162.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:03.030Z,1520543163.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:03.392Z,1520543163.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:03.423Z,1520543163.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:03.788Z,1520543163.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:03.862Z,1520543163.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:04.170Z,1520543164.170 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T21:06:04.170Z,1520543164.170 [NAL9602] Data Fault, FailCount= 4
2018-03-08T21:06:04.170Z,1520543164.170 [NAL9602](ERROR): Data Fault
2018-03-08T21:06:04.187Z,1520543164.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:04.219Z,1520543164.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:04.240Z,1520543164.240 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T21:06:04.574Z,1520543164.574 [NAL9602](INFO): Powering down
2018-03-08T21:06:04.591Z,1520543164.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:04.635Z,1520543164.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:04.986Z,1520543164.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:05.002Z,1520543165.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:05.390Z,1520543165.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:05.405Z,1520543165.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:05.442Z,1520543165.442 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T21:06:05.442Z,1520543165.442 [NAL9602] No Fault, FailCount= 4
2018-03-08T21:06:05.786Z,1520543165.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:05.821Z,1520543165.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:06.180Z,1520543166.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:06.223Z,1520543166.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:06.587Z,1520543166.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:06.614Z,1520543166.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:06.986Z,1520543166.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:07.012Z,1520543167.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:07.384Z,1520543167.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:07.427Z,1520543167.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:07.790Z,1520543167.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:07.816Z,1520543167.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:08.189Z,1520543168.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:08.218Z,1520543168.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:08.580Z,1520543168.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:08.595Z,1520543168.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:08.987Z,1520543168.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:09.014Z,1520543169.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:09.390Z,1520543169.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:09.430Z,1520543169.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:09.781Z,1520543169.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:09.797Z,1520543169.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:10.188Z,1520543170.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:10.227Z,1520543170.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:10.593Z,1520543170.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:10.608Z,1520543170.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:10.994Z,1520543170.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:11.010Z,1520543171.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:11.391Z,1520543171.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:11.407Z,1520543171.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:11.792Z,1520543171.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:11.808Z,1520543171.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:12.205Z,1520543172.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:12.245Z,1520543172.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:12.606Z,1520543172.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:12.646Z,1520543172.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:12.995Z,1520543172.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:13.015Z,1520543173.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:13.388Z,1520543173.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:13.404Z,1520543173.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:13.805Z,1520543173.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:13.821Z,1520543173.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:14.196Z,1520543174.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:14.211Z,1520543174.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:14.588Z,1520543174.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:14.603Z,1520543174.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:14.995Z,1520543174.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:15.015Z,1520543175.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:15.394Z,1520543175.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:15.409Z,1520543175.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:15.792Z,1520543175.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:15.807Z,1520543175.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:16.195Z,1520543176.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:16.218Z,1520543176.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:16.596Z,1520543176.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:16.619Z,1520543176.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:16.988Z,1520543176.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:17.023Z,1520543177.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:17.388Z,1520543177.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:17.443Z,1520543177.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:17.790Z,1520543177.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:17.823Z,1520543177.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:18.184Z,1520543178.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:18.200Z,1520543178.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:18.590Z,1520543178.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:18.629Z,1520543178.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:18.990Z,1520543178.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:19.031Z,1520543179.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:19.380Z,1520543179.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:19.395Z,1520543179.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:19.791Z,1520543179.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:19.829Z,1520543179.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:20.191Z,1520543180.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:20.230Z,1520543180.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:20.584Z,1520543180.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:20.599Z,1520543180.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:20.990Z,1520543180.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:21.005Z,1520543181.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:21.387Z,1520543181.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:21.402Z,1520543181.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:21.787Z,1520543181.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:21.804Z,1520543181.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:22.194Z,1520543182.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:22.209Z,1520543182.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:22.587Z,1520543182.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:22.602Z,1520543182.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:22.987Z,1520543182.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:23.002Z,1520543183.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:23.394Z,1520543183.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:23.409Z,1520543183.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:23.790Z,1520543183.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:23.806Z,1520543183.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:26.891Z,1520543186.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:26.907Z,1520543186.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:26.996Z,1520543186.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:27.036Z,1520543187.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:27.393Z,1520543187.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:27.409Z,1520543187.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:27.787Z,1520543187.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:27.802Z,1520543187.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:28.192Z,1520543188.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:28.207Z,1520543188.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:28.591Z,1520543188.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:28.607Z,1520543188.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:28.990Z,1520543188.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:29.006Z,1520543189.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:29.391Z,1520543189.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:29.406Z,1520543189.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:29.786Z,1520543189.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:29.801Z,1520543189.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:30.187Z,1520543190.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:30.202Z,1520543190.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:30.586Z,1520543190.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:30.601Z,1520543190.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:30.991Z,1520543190.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:31.006Z,1520543191.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:31.385Z,1520543191.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:31.400Z,1520543191.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:31.792Z,1520543191.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:31.806Z,1520543191.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:32.191Z,1520543192.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:32.206Z,1520543192.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:32.584Z,1520543192.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:32.599Z,1520543192.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:32.986Z,1520543192.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:33.006Z,1520543193.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:33.391Z,1520543193.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:33.406Z,1520543193.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:33.784Z,1520543193.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:33.799Z,1520543193.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:34.192Z,1520543194.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:34.214Z,1520543194.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:34.587Z,1520543194.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:34.606Z,1520543194.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:34.960Z,1520543194.960 [NAL9602](INFO): Powering up NAL9602
2018-03-08T21:06:34.990Z,1520543194.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:35.005Z,1520543195.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:35.391Z,1520543195.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:35.406Z,1520543195.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:35.787Z,1520543195.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:35.802Z,1520543195.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:36.185Z,1520543196.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:36.201Z,1520543196.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:36.583Z,1520543196.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:36.609Z,1520543196.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:36.991Z,1520543196.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:37.010Z,1520543197.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:37.385Z,1520543197.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:37.400Z,1520543197.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:37.782Z,1520543197.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:37.797Z,1520543197.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:38.191Z,1520543198.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:38.208Z,1520543198.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:38.590Z,1520543198.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:38.606Z,1520543198.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:38.990Z,1520543198.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:39.005Z,1520543199.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:39.385Z,1520543199.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:39.405Z,1520543199.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:39.780Z,1520543199.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:39.795Z,1520543199.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:40.183Z,1520543200.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:40.202Z,1520543200.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:40.589Z,1520543200.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:40.605Z,1520543200.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:40.982Z,1520543200.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:41.002Z,1520543201.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:41.396Z,1520543201.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:41.410Z,1520543201.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:41.789Z,1520543201.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:41.805Z,1520543201.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:42.183Z,1520543202.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:42.198Z,1520543202.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:42.586Z,1520543202.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:42.601Z,1520543202.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:42.991Z,1520543202.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:43.007Z,1520543203.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:43.382Z,1520543203.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:43.398Z,1520543203.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:43.788Z,1520543203.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:43.803Z,1520543203.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:44.186Z,1520543204.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:44.206Z,1520543204.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:44.591Z,1520543204.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:44.606Z,1520543204.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:44.990Z,1520543204.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:45.005Z,1520543205.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:45.397Z,1520543205.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:45.413Z,1520543205.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:45.762Z,1520543205.762 [NAL9602](INFO): NAL9602 initialized
2018-03-08T21:06:45.786Z,1520543205.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:45.814Z,1520543205.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:46.199Z,1520543206.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:46.215Z,1520543206.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:46.601Z,1520543206.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:46.617Z,1520543206.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:46.997Z,1520543206.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:47.013Z,1520543207.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:47.398Z,1520543207.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:47.413Z,1520543207.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:47.794Z,1520543207.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:47.811Z,1520543207.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:48.194Z,1520543208.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:48.209Z,1520543208.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:48.594Z,1520543208.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:48.609Z,1520543208.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:48.998Z,1520543208.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:49.014Z,1520543209.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:49.397Z,1520543209.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:49.413Z,1520543209.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:49.799Z,1520543209.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:49.814Z,1520543209.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:50.179Z,1520543210.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:50.211Z,1520543210.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:50.594Z,1520543210.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:50.610Z,1520543210.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:50.992Z,1520543210.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:51.012Z,1520543211.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:51.393Z,1520543211.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:51.409Z,1520543211.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:51.797Z,1520543211.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:51.813Z,1520543211.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:52.198Z,1520543212.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:52.213Z,1520543212.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:52.598Z,1520543212.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:52.614Z,1520543212.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:52.992Z,1520543212.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:53.007Z,1520543213.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:53.391Z,1520543213.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:53.411Z,1520543213.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:53.798Z,1520543213.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:53.815Z,1520543213.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:54.201Z,1520543214.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:54.217Z,1520543214.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:54.597Z,1520543214.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:54.620Z,1520543214.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:54.993Z,1520543214.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:55.008Z,1520543215.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:55.376Z,1520543215.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:55.415Z,1520543215.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:55.801Z,1520543215.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:55.817Z,1520543215.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:56.205Z,1520543216.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:56.226Z,1520543216.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:56.598Z,1520543216.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:56.613Z,1520543216.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:56.992Z,1520543216.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:57.014Z,1520543217.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:57.375Z,1520543217.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:57.409Z,1520543217.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:57.801Z,1520543217.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:57.816Z,1520543217.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:58.205Z,1520543218.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:58.220Z,1520543218.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:58.602Z,1520543218.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:58.617Z,1520543218.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:58.992Z,1520543218.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:59.014Z,1520543219.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:59.391Z,1520543219.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:59.406Z,1520543219.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:06:59.802Z,1520543219.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:06:59.817Z,1520543219.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:00.205Z,1520543220.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:00.220Z,1520543220.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:00.601Z,1520543220.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:00.616Z,1520543220.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:00.992Z,1520543220.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:01.007Z,1520543221.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:01.391Z,1520543221.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:01.407Z,1520543221.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:01.798Z,1520543221.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:01.813Z,1520543221.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:02.206Z,1520543222.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:02.226Z,1520543222.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:02.597Z,1520543222.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:02.613Z,1520543222.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:02.992Z,1520543222.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:03.007Z,1520543223.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:03.375Z,1520543223.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:03.408Z,1520543223.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:03.801Z,1520543223.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:03.816Z,1520543223.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:04.205Z,1520543224.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:04.221Z,1520543224.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:04.602Z,1520543224.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:04.617Z,1520543224.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:04.976Z,1520543224.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:05.015Z,1520543225.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:05.379Z,1520543225.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:05.415Z,1520543225.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:05.802Z,1520543225.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:05.817Z,1520543225.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:06.205Z,1520543226.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:06.220Z,1520543226.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:06.597Z,1520543226.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:06.613Z,1520543226.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:06.975Z,1520543226.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:07.012Z,1520543227.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:07.383Z,1520543227.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:07.409Z,1520543227.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:07.802Z,1520543227.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:07.817Z,1520543227.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:08.195Z,1520543228.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:08.224Z,1520543228.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:08.601Z,1520543228.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:08.617Z,1520543228.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:08.979Z,1520543228.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:09.006Z,1520543229.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:09.375Z,1520543229.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:09.407Z,1520543229.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:09.802Z,1520543229.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:09.822Z,1520543229.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:10.205Z,1520543230.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:10.220Z,1520543230.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:10.598Z,1520543230.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:10.618Z,1520543230.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:10.983Z,1520543230.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:11.010Z,1520543231.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:11.379Z,1520543231.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:11.405Z,1520543231.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:11.797Z,1520543231.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:11.822Z,1520543231.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:12.205Z,1520543232.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:12.220Z,1520543232.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:12.601Z,1520543232.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:12.617Z,1520543232.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:12.979Z,1520543232.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:13.011Z,1520543233.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:13.379Z,1520543233.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:13.405Z,1520543233.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:13.808Z,1520543233.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:13.824Z,1520543233.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:14.197Z,1520543234.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:14.212Z,1520543234.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:14.601Z,1520543234.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:14.622Z,1520543234.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:14.982Z,1520543234.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:15.009Z,1520543235.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:15.379Z,1520543235.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:15.406Z,1520543235.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:15.801Z,1520543235.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:15.817Z,1520543235.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:16.202Z,1520543236.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:16.217Z,1520543236.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:16.598Z,1520543236.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:16.618Z,1520543236.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:16.983Z,1520543236.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:17.010Z,1520543237.010 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:17.010Z,1520543237.010 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 267
2018-03-08T21:07:17.010Z,1520543237.010 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T21:07:17.011Z,1520543237.011 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:17.012Z,1520543237.012 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 267
2018-03-08T21:07:17.012Z,1520543237.012 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T21:07:17.014Z,1520543237.014 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:17.014Z,1520543237.014 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 267
2018-03-08T21:07:17.014Z,1520543237.014 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T21:07:17.025Z,1520543237.025 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T21:07:17.026Z,1520543237.026 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T21:07:17.026Z,1520543237.026 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T21:07:17.379Z,1520543237.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:17.421Z,1520543237.421 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T21:07:17.421Z,1520543237.421 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 267
2018-03-08T21:07:17.422Z,1520543237.422 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T21:07:17.422Z,1520543237.422 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 267
2018-03-08T21:07:17.422Z,1520543237.422 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T21:07:17.422Z,1520543237.422 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 267
2018-03-08T21:07:17.800Z,1520543237.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:17.822Z,1520543237.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T21:07:17.823Z,1520543237.823 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:07:17.823Z,1520543237.823 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:07:17.824Z,1520543237.824 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T21:07:17.824Z,1520543237.824 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:07:17.824Z,1520543237.824 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:07:17.825Z,1520543237.825 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T21:07:17.825Z,1520543237.825 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:07:17.825Z,1520543237.825 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:07:18.198Z,1520543238.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:18.243Z,1520543238.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T21:07:18.244Z,1520543238.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:18.593Z,1520543238.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:18.619Z,1520543238.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T21:07:18.621Z,1520543238.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:18.979Z,1520543238.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:18.994Z,1520543238.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T21:07:18.995Z,1520543238.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:19.388Z,1520543239.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:19.424Z,1520543239.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T21:07:19.425Z,1520543239.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:19.797Z,1520543239.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:19.821Z,1520543239.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T21:07:19.822Z,1520543239.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:20.201Z,1520543240.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:20.230Z,1520543240.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T21:07:20.231Z,1520543240.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:20.597Z,1520543240.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:20.621Z,1520543240.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T21:07:20.622Z,1520543240.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:20.985Z,1520543240.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:20.000Z,1520543241.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T21:07:21.001Z,1520543241.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:21.387Z,1520543241.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:21.402Z,1520543241.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T21:07:21.403Z,1520543241.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:21.793Z,1520543241.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:21.825Z,1520543241.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T21:07:21.825Z,1520543241.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:22.201Z,1520543242.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:22.230Z,1520543242.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T21:07:22.231Z,1520543242.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:22.597Z,1520543242.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:22.630Z,1520543242.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T21:07:22.631Z,1520543242.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:22.987Z,1520543242.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:23.023Z,1520543243.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T21:07:23.025Z,1520543243.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:23.387Z,1520543243.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:23.403Z,1520543243.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T21:07:23.404Z,1520543243.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:23.796Z,1520543243.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:23.829Z,1520543243.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T21:07:23.830Z,1520543243.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:24.205Z,1520543244.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:24.234Z,1520543244.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T21:07:24.235Z,1520543244.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:27.308Z,1520543247.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:27.331Z,1520543247.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-03-08T21:07:27.332Z,1520543247.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:27.430Z,1520543247.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:27.468Z,1520543247.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-08T21:07:27.469Z,1520543247.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:27.787Z,1520543247.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:27.802Z,1520543247.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T21:07:27.803Z,1520543247.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:28.193Z,1520543248.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:28.237Z,1520543248.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T21:07:28.238Z,1520543248.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:28.586Z,1520543248.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:28.601Z,1520543248.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T21:07:28.602Z,1520543248.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:28.994Z,1520543248.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:29.009Z,1520543249.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T21:07:29.010Z,1520543249.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:29.401Z,1520543249.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:29.433Z,1520543249.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T21:07:29.434Z,1520543249.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:29.790Z,1520543249.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:29.805Z,1520543249.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T21:07:29.806Z,1520543249.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:30.187Z,1520543250.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:30.207Z,1520543250.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T21:07:30.208Z,1520543250.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:30.591Z,1520543250.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:30.606Z,1520543250.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T21:07:30.607Z,1520543250.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:30.993Z,1520543250.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:31.009Z,1520543251.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T21:07:31.009Z,1520543251.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:31.387Z,1520543251.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:31.403Z,1520543251.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T21:07:31.403Z,1520543251.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:31.793Z,1520543251.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:31.809Z,1520543251.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T21:07:31.810Z,1520543251.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:32.190Z,1520543252.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:32.217Z,1520543252.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T21:07:32.218Z,1520543252.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:32.597Z,1520543252.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:32.612Z,1520543252.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T21:07:32.613Z,1520543252.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:32.985Z,1520543252.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:33.000Z,1520543253.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T21:07:33.001Z,1520543253.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:33.372Z,1520543253.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:33.407Z,1520543253.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T21:07:33.408Z,1520543253.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:33.797Z,1520543253.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:33.812Z,1520543253.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T21:07:33.813Z,1520543253.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:34.197Z,1520543254.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:34.212Z,1520543254.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T21:07:34.213Z,1520543254.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:34.592Z,1520543254.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:34.608Z,1520543254.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T21:07:34.609Z,1520543254.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:34.988Z,1520543254.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:35.004Z,1520543255.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T21:07:35.005Z,1520543255.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:35.384Z,1520543255.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:35.399Z,1520543255.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T21:07:35.399Z,1520543255.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:35.792Z,1520543255.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:35.816Z,1520543255.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T21:07:35.821Z,1520543255.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:36.202Z,1520543256.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:36.222Z,1520543256.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T21:07:36.223Z,1520543256.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:36.602Z,1520543256.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:36.617Z,1520543256.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T21:07:36.617Z,1520543256.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:36.992Z,1520543256.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:37.007Z,1520543257.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T21:07:37.008Z,1520543257.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:37.378Z,1520543257.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:37.410Z,1520543257.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:37.799Z,1520543257.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:37.814Z,1520543257.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:38.194Z,1520543258.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:38.216Z,1520543258.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:38.601Z,1520543258.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:38.616Z,1520543258.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:38.979Z,1520543258.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:39.007Z,1520543259.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:39.376Z,1520543259.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:39.411Z,1520543259.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:39.797Z,1520543259.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:39.816Z,1520543259.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:40.216Z,1520543260.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:40.618Z,1520543260.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:41.007Z,1520543261.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:41.392Z,1520543261.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:41.406Z,1520543261.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:41.799Z,1520543261.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:41.820Z,1520543261.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:42.223Z,1520543262.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:42.262Z,1520543262.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:42.595Z,1520543262.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:42.635Z,1520543262.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:42.987Z,1520543262.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:43.031Z,1520543263.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:43.389Z,1520543263.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:43.429Z,1520543263.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:43.814Z,1520543263.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:43.829Z,1520543263.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:44.193Z,1520543264.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:44.223Z,1520543264.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:44.615Z,1520543264.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:07:44.651Z,1520543264.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:45.003Z,1520543265.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:45.414Z,1520543265.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:45.803Z,1520543265.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:46.219Z,1520543266.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:46.608Z,1520543266.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:47.022Z,1520543267.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:47.421Z,1520543267.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:47.812Z,1520543267.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:48.203Z,1520543268.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:48.605Z,1520543268.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:49.009Z,1520543269.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:49.410Z,1520543269.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:49.819Z,1520543269.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:50.218Z,1520543270.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:50.612Z,1520543270.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:51.011Z,1520543271.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:51.413Z,1520543271.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:51.813Z,1520543271.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:52.222Z,1520543272.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:52.613Z,1520543272.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:53.006Z,1520543273.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:53.415Z,1520543273.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:53.811Z,1520543273.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:54.219Z,1520543274.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:54.628Z,1520543274.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:55.013Z,1520543275.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:55.413Z,1520543275.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:55.822Z,1520543275.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:56.222Z,1520543276.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:56.692Z,1520543276.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:57.016Z,1520543277.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:57.391Z,1520543277.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:57.815Z,1520543277.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:58.231Z,1520543278.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:58.616Z,1520543278.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:59.018Z,1520543279.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:59.607Z,1520543279.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:07:59.826Z,1520543279.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:00.222Z,1520543280.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:00.618Z,1520543280.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:01.008Z,1520543281.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:01.409Z,1520543281.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:01.821Z,1520543281.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:02.213Z,1520543282.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:02.622Z,1520543282.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:03.011Z,1520543283.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:03.400Z,1520543283.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:03.818Z,1520543283.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:04.221Z,1520543284.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:04.612Z,1520543284.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:05.009Z,1520543285.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:05.411Z,1520543285.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:05.833Z,1520543285.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:06.208Z,1520543286.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:06.635Z,1520543286.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:07.007Z,1520543287.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:07.411Z,1520543287.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:07.835Z,1520543287.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:08.211Z,1520543288.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:08.611Z,1520543288.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:09.005Z,1520543289.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:09.410Z,1520543289.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:09.810Z,1520543289.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:10.210Z,1520543290.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:10.611Z,1520543290.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:11.007Z,1520543291.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:11.406Z,1520543291.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:11.810Z,1520543291.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:12.212Z,1520543292.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:12.610Z,1520543292.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:13.006Z,1520543293.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:13.401Z,1520543293.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:13.808Z,1520543293.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:14.212Z,1520543294.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:14.608Z,1520543294.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:15.006Z,1520543295.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:15.407Z,1520543295.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:15.809Z,1520543295.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:16.211Z,1520543296.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:16.609Z,1520543296.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:17.006Z,1520543297.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:17.406Z,1520543297.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:17.809Z,1520543297.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:18.212Z,1520543298.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:18.610Z,1520543298.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:19.006Z,1520543299.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:19.402Z,1520543299.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:19.808Z,1520543299.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:20.234Z,1520543300.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:20.610Z,1520543300.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:21.007Z,1520543301.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:21.399Z,1520543301.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:21.808Z,1520543301.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:22.211Z,1520543302.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:22.634Z,1520543302.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:23.003Z,1520543303.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:23.405Z,1520543303.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:23.807Z,1520543303.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:24.211Z,1520543304.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:24.618Z,1520543304.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:27.704Z,1520543307.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:27.842Z,1520543307.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:28.195Z,1520543308.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:28.602Z,1520543308.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:28.991Z,1520543308.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:29.387Z,1520543309.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:29.790Z,1520543309.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:30.187Z,1520543310.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:30.589Z,1520543310.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:30.997Z,1520543310.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:31.384Z,1520543311.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:31.791Z,1520543311.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:32.189Z,1520543312.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:32.568Z,1520543312.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:32.967Z,1520543312.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:33.393Z,1520543313.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:33.789Z,1520543313.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:34.194Z,1520543314.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:34.597Z,1520543314.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:34.972Z,1520543314.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:35.394Z,1520543315.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:35.796Z,1520543315.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:36.176Z,1520543316.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:36.584Z,1520543316.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:36.975Z,1520543316.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:37.375Z,1520543317.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:37.780Z,1520543317.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:38.181Z,1520543318.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:38.580Z,1520543318.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:38.978Z,1520543318.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:39.378Z,1520543319.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:39.780Z,1520543319.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:40.180Z,1520543320.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:40.581Z,1520543320.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:41.058Z,1520543321.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:41.376Z,1520543321.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:41.785Z,1520543321.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:42.193Z,1520543322.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:42.592Z,1520543322.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:42.983Z,1520543322.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:43.367Z,1520543323.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:43.819Z,1520543323.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:44.195Z,1520543324.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:44.640Z,1520543324.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:44.992Z,1520543324.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:45.375Z,1520543325.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:45.802Z,1520543325.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:46.200Z,1520543326.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:46.602Z,1520543326.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:46.999Z,1520543326.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:47.373Z,1520543327.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:47.801Z,1520543327.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:48.184Z,1520543328.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:48.580Z,1520543328.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:48.977Z,1520543328.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:49.375Z,1520543329.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:49.780Z,1520543329.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:50.180Z,1520543330.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:50.580Z,1520543330.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:50.977Z,1520543330.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:51.375Z,1520543331.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:51.780Z,1520543331.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:52.180Z,1520543332.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:52.586Z,1520543332.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:52.976Z,1520543332.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:53.380Z,1520543333.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:53.780Z,1520543333.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:54.180Z,1520543334.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:54.580Z,1520543334.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:54.976Z,1520543334.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:55.378Z,1520543335.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:55.780Z,1520543335.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:56.179Z,1520543336.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:56.580Z,1520543336.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:56.976Z,1520543336.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:57.377Z,1520543337.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:57.781Z,1520543337.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:58.181Z,1520543338.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:58.580Z,1520543338.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:58.976Z,1520543338.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:59.375Z,1520543339.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:08:59.781Z,1520543339.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:00.180Z,1520543340.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:00.580Z,1520543340.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:00.976Z,1520543340.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:01.375Z,1520543341.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:01.780Z,1520543341.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:02.179Z,1520543342.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:02.586Z,1520543342.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:02.975Z,1520543342.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:03.375Z,1520543343.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:03.780Z,1520543343.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:04.180Z,1520543344.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:04.586Z,1520543344.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:04.973Z,1520543344.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:05.375Z,1520543345.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:05.780Z,1520543345.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:06.181Z,1520543346.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:06.580Z,1520543346.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:06.976Z,1520543346.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:07.405Z,1520543347.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:07.806Z,1520543347.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:08.207Z,1520543348.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:08.580Z,1520543348.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:08.980Z,1520543348.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:09.376Z,1520543349.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:09.790Z,1520543349.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:10.184Z,1520543350.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:10.591Z,1520543350.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:10.976Z,1520543350.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:11.375Z,1520543351.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:11.784Z,1520543351.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:12.184Z,1520543352.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:12.590Z,1520543352.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:12.976Z,1520543352.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:13.376Z,1520543353.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:13.790Z,1520543353.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:14.185Z,1520543354.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:14.590Z,1520543354.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:14.982Z,1520543354.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:15.375Z,1520543355.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:15.790Z,1520543355.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:16.192Z,1520543356.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:16.583Z,1520543356.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:16.977Z,1520543356.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:17.377Z,1520543357.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:17.785Z,1520543357.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:18.184Z,1520543358.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:18.591Z,1520543358.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:18.978Z,1520543358.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:19.376Z,1520543359.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:19.784Z,1520543359.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:20.189Z,1520543360.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:20.584Z,1520543360.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:20.976Z,1520543360.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:21.381Z,1520543361.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:21.793Z,1520543361.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:22.190Z,1520543362.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:22.591Z,1520543362.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:22.986Z,1520543362.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:23.379Z,1520543363.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:23.788Z,1520543363.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:24.182Z,1520543364.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:24.590Z,1520543364.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:24.979Z,1520543364.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:25.378Z,1520543365.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:28.621Z,1520543368.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:28.730Z,1520543368.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:29.113Z,1520543369.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:29.513Z,1520543369.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:29.919Z,1520543369.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:30.322Z,1520543370.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:30.694Z,1520543370.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:31.109Z,1520543371.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:31.517Z,1520543371.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:31.915Z,1520543371.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:32.302Z,1520543372.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:32.697Z,1520543372.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:33.099Z,1520543373.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:33.508Z,1520543373.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:33.906Z,1520543373.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:34.303Z,1520543374.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:34.723Z,1520543374.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:35.125Z,1520543375.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:35.504Z,1520543375.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:35.899Z,1520543375.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:36.300Z,1520543376.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:36.711Z,1520543376.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:37.109Z,1520543377.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:37.510Z,1520543377.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:37.910Z,1520543377.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:38.309Z,1520543378.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:38.700Z,1520543378.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:39.100Z,1520543379.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:39.501Z,1520543379.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:39.903Z,1520543379.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:40.309Z,1520543380.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:40.703Z,1520543380.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:41.098Z,1520543381.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:41.511Z,1520543381.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:41.914Z,1520543381.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:42.314Z,1520543382.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:42.717Z,1520543382.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:43.113Z,1520543383.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:43.516Z,1520543383.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:43.906Z,1520543383.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:44.307Z,1520543384.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:44.716Z,1520543384.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:45.117Z,1520543385.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:45.521Z,1520543385.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:45.920Z,1520543385.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:46.313Z,1520543386.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:46.711Z,1520543386.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:47.111Z,1520543387.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:47.516Z,1520543387.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:47.918Z,1520543387.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:48.313Z,1520543388.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:48.690Z,1520543388.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:49.115Z,1520543389.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:49.523Z,1520543389.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:49.922Z,1520543389.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:50.311Z,1520543390.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:50.691Z,1520543390.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:51.116Z,1520543391.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:51.484Z,1520543391.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:51.913Z,1520543391.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:52.318Z,1520543392.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:52.714Z,1520543392.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:53.095Z,1520543393.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:53.494Z,1520543393.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:53.891Z,1520543393.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:54.319Z,1520543394.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:54.710Z,1520543394.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:55.100Z,1520543395.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:55.507Z,1520543395.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:55.967Z,1520543395.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:56.298Z,1520543396.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:56.694Z,1520543396.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:57.098Z,1520543397.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:57.507Z,1520543397.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:57.901Z,1520543397.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:58.303Z,1520543398.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:58.746Z,1520543398.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:59.104Z,1520543399.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:59.496Z,1520543399.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:09:59.909Z,1520543399.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:00.299Z,1520543400.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:00.714Z,1520543400.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:01.109Z,1520543401.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:01.513Z,1520543401.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:01.912Z,1520543401.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:02.299Z,1520543402.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:02.717Z,1520543402.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:03.096Z,1520543403.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:03.493Z,1520543403.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:03.918Z,1520543403.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:04.301Z,1520543404.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:04.724Z,1520543404.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:05.091Z,1520543405.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:05.514Z,1520543405.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:05.890Z,1520543405.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:06.296Z,1520543406.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:06.694Z,1520543406.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:07.126Z,1520543407.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:07.522Z,1520543407.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:07.925Z,1520543407.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:08.290Z,1520543408.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:08.720Z,1520543408.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:09.098Z,1520543409.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:09.496Z,1520543409.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:09.921Z,1520543409.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:10.322Z,1520543410.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:10.722Z,1520543410.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:11.115Z,1520543411.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:11.514Z,1520543411.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:11.919Z,1520543411.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:12.300Z,1520543412.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:12.697Z,1520543412.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:13.122Z,1520543413.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:13.526Z,1520543413.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:13.902Z,1520543413.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:14.299Z,1520543414.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:14.696Z,1520543414.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:15.126Z,1520543415.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:15.498Z,1520543415.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:15.901Z,1520543415.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:16.303Z,1520543416.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:16.719Z,1520543416.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:17.098Z,1520543417.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:17.495Z,1520543417.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:17.895Z,1520543417.895 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:17.896Z,1520543417.896 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 268
2018-03-08T21:10:17.896Z,1520543417.896 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T21:10:17.898Z,1520543417.898 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:17.898Z,1520543417.898 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 268
2018-03-08T21:10:17.898Z,1520543417.898 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T21:10:17.899Z,1520543417.899 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:17.900Z,1520543417.900 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 268
2018-03-08T21:10:17.900Z,1520543417.900 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T21:10:17.923Z,1520543417.923 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T21:10:17.924Z,1520543417.924 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T21:10:17.924Z,1520543417.924 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T21:10:18.335Z,1520543418.335 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T21:10:18.335Z,1520543418.335 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 268
2018-03-08T21:10:18.336Z,1520543418.336 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T21:10:18.336Z,1520543418.336 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 268
2018-03-08T21:10:18.337Z,1520543418.337 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T21:10:18.337Z,1520543418.337 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 268
2018-03-08T21:10:18.700Z,1520543418.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T21:10:18.701Z,1520543418.701 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:10:18.701Z,1520543418.701 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:10:18.701Z,1520543418.701 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T21:10:18.702Z,1520543418.702 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:10:18.702Z,1520543418.702 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:10:18.703Z,1520543418.703 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T21:10:18.703Z,1520543418.703 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:10:18.703Z,1520543418.703 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:10:19.107Z,1520543419.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T21:10:19.113Z,1520543419.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:19.510Z,1520543419.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T21:10:19.511Z,1520543419.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:19.915Z,1520543419.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T21:10:19.916Z,1520543419.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:20.287Z,1520543420.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T21:10:20.288Z,1520543420.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:20.695Z,1520543420.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T21:10:20.697Z,1520543420.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:21.102Z,1520543421.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T21:10:21.103Z,1520543421.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:21.512Z,1520543421.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T21:10:21.513Z,1520543421.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:21.910Z,1520543421.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T21:10:21.911Z,1520543421.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:22.310Z,1520543422.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T21:10:22.311Z,1520543422.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:22.703Z,1520543422.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T21:10:22.704Z,1520543422.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:23.099Z,1520543423.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T21:10:23.101Z,1520543423.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:23.107Z,1520543423.107 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T21:05:23.1Z
2018-03-08T21:10:23.107Z,1520543423.107 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T21:10:23.107Z,1520543423.107 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T21:10:23.503Z,1520543423.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T21:10:23.503Z,1520543423.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:23.999Z,1520543423.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T21:10:23.999Z,1520543423.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:24.295Z,1520543424.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T21:10:24.296Z,1520543424.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:27.407Z,1520543427.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-03-08T21:10:27.408Z,1520543427.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:27.528Z,1520543427.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T21:10:27.545Z,1520543427.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:27.844Z,1520543427.844 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0312.lzma
2018-03-08T21:10:27.925Z,1520543427.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T21:10:27.926Z,1520543427.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:28.270Z,1520543428.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T21:10:28.271Z,1520543428.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:28.643Z,1520543428.643 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0312.lzma.bak
2018-03-08T21:10:28.643Z,1520543428.643 [DataOverHttps](INFO): SBD MOMSN=7989149
2018-03-08T21:10:28.705Z,1520543428.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T21:10:28.706Z,1520543428.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:29.279Z,1520543429.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2018-03-08T21:10:29.280Z,1520543429.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:29.503Z,1520543429.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T21:10:29.505Z,1520543429.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:32.607Z,1520543432.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-03-08T21:10:32.608Z,1520543432.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:32.731Z,1520543432.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T21:10:32.732Z,1520543432.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:33.108Z,1520543433.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T21:10:33.109Z,1520543433.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:33.477Z,1520543433.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T21:10:33.479Z,1520543433.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:33.883Z,1520543433.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T21:10:33.884Z,1520543433.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:34.279Z,1520543434.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T21:10:34.280Z,1520543434.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:34.678Z,1520543434.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T21:10:34.679Z,1520543434.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:37.792Z,1520543437.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-03-08T21:10:37.809Z,1520543437.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:37.935Z,1520543437.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:38.250Z,1520543438.250 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0313.lzma
2018-03-08T21:10:38.328Z,1520543438.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:38.695Z,1520543438.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:39.048Z,1520543439.048 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0313.lzma.bak
2018-03-08T21:10:39.048Z,1520543439.048 [DataOverHttps](INFO): SBD MOMSN=7989151
2018-03-08T21:10:39.126Z,1520543439.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:39.678Z,1520543439.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:39.681Z,1520543439.681 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T21:10:39.681Z,1520543439.681 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T21:10:39.682Z,1520543439.682 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T21:10:39.901Z,1520543439.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:43.031Z,1520543443.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:43.156Z,1520543443.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:43.529Z,1520543443.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:43.919Z,1520543443.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:44.326Z,1520543444.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:44.703Z,1520543444.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:45.126Z,1520543445.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:45.527Z,1520543445.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:45.930Z,1520543445.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:46.305Z,1520543446.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:46.706Z,1520543446.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:47.130Z,1520543447.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:47.507Z,1520543447.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:47.927Z,1520543447.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:48.331Z,1520543448.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:48.734Z,1520543448.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:49.122Z,1520543449.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:49.530Z,1520543449.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:49.904Z,1520543449.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:50.322Z,1520543450.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:50.712Z,1520543450.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:51.135Z,1520543451.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:51.512Z,1520543451.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:51.931Z,1520543451.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:52.323Z,1520543452.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:52.703Z,1520543452.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:53.133Z,1520543453.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:53.515Z,1520543453.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:53.911Z,1520543453.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:54.330Z,1520543454.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:54.734Z,1520543454.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:55.134Z,1520543455.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:55.508Z,1520543455.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:55.905Z,1520543455.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:56.298Z,1520543456.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:56.727Z,1520543456.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:57.129Z,1520543457.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:57.523Z,1520543457.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:57.919Z,1520543457.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:58.325Z,1520543458.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:58.700Z,1520543458.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:59.123Z,1520543459.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:59.527Z,1520543459.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:10:59.921Z,1520543459.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:00.342Z,1520543460.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:00.725Z,1520543460.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:01.097Z,1520543461.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:01.527Z,1520543461.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:01.903Z,1520543461.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:02.299Z,1520543462.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:02.705Z,1520543462.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:03.127Z,1520543463.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:03.526Z,1520543463.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:03.934Z,1520543463.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:04.307Z,1520543464.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:04.724Z,1520543464.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:05.106Z,1520543465.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:05.501Z,1520543465.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:05.930Z,1520543465.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:06.327Z,1520543466.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:06.731Z,1520543466.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:07.102Z,1520543467.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:07.504Z,1520543467.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:07.930Z,1520543467.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:08.305Z,1520543468.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:08.703Z,1520543468.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:09.112Z,1520543469.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:09.523Z,1520543469.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:09.911Z,1520543469.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:10.304Z,1520543470.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:10.699Z,1520543470.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:11.126Z,1520543471.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:11.505Z,1520543471.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:11.929Z,1520543471.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:12.309Z,1520543472.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:12.726Z,1520543472.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:13.134Z,1520543473.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:13.503Z,1520543473.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:13.907Z,1520543473.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:14.322Z,1520543474.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:14.705Z,1520543474.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:15.132Z,1520543475.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:15.507Z,1520543475.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:16.006Z,1520543476.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:16.307Z,1520543476.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:16.700Z,1520543476.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:17.110Z,1520543477.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:17.529Z,1520543477.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:17.910Z,1520543477.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:18.329Z,1520543478.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:18.834Z,1520543478.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:19.123Z,1520543479.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:19.505Z,1520543479.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:19.902Z,1520543479.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:20.302Z,1520543480.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:20.721Z,1520543480.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:21.111Z,1520543481.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:21.512Z,1520543481.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:21.918Z,1520543481.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:22.315Z,1520543482.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:22.703Z,1520543482.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:23.107Z,1520543483.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:23.511Z,1520543483.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:23.931Z,1520543483.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:24.338Z,1520543484.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:24.710Z,1520543484.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:25.114Z,1520543485.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:25.534Z,1520543485.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:25.919Z,1520543485.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:26.319Z,1520543486.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:26.711Z,1520543486.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:27.142Z,1520543487.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:27.534Z,1520543487.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:27.923Z,1520543487.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:28.309Z,1520543488.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:28.723Z,1520543488.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:29.111Z,1520543489.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:29.512Z,1520543489.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:29.923Z,1520543489.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:30.321Z,1520543490.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:30.718Z,1520543490.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:31.109Z,1520543491.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:31.506Z,1520543491.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:31.919Z,1520543491.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:32.337Z,1520543492.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:32.711Z,1520543492.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:33.119Z,1520543493.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:33.519Z,1520543493.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:33.919Z,1520543493.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:34.313Z,1520543494.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:34.701Z,1520543494.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:35.123Z,1520543495.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:35.511Z,1520543495.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:35.918Z,1520543495.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:36.317Z,1520543496.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:36.718Z,1520543496.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:37.111Z,1520543497.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:37.510Z,1520543497.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:37.909Z,1520543497.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:38.318Z,1520543498.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:38.710Z,1520543498.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:39.121Z,1520543499.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:39.522Z,1520543499.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:39.920Z,1520543499.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:40.310Z,1520543500.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:40.707Z,1520543500.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:45.146Z,1520543505.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:45.287Z,1520543505.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:45.671Z,1520543505.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:46.109Z,1520543506.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:46.470Z,1520543506.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:46.868Z,1520543506.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:47.267Z,1520543507.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:47.664Z,1520543507.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:48.076Z,1520543508.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:48.472Z,1520543508.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:48.874Z,1520543508.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:49.266Z,1520543509.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:49.658Z,1520543509.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:50.077Z,1520543510.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:50.474Z,1520543510.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:50.876Z,1520543510.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:51.274Z,1520543511.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:51.674Z,1520543511.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:52.123Z,1520543512.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:52.470Z,1520543512.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:52.869Z,1520543512.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:53.271Z,1520543513.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:53.667Z,1520543513.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:54.072Z,1520543514.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:54.476Z,1520543514.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:54.876Z,1520543514.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:55.270Z,1520543515.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:55.670Z,1520543515.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:56.070Z,1520543516.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:56.469Z,1520543516.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:56.879Z,1520543516.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:57.286Z,1520543517.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:57.677Z,1520543517.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:58.070Z,1520543518.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:58.467Z,1520543518.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:58.869Z,1520543518.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:59.270Z,1520543519.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:11:59.674Z,1520543519.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:00.075Z,1520543520.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:00.089Z,1520543520.089 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T21:12:00.479Z,1520543520.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:00.882Z,1520543520.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:01.270Z,1520543521.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:01.665Z,1520543521.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:02.069Z,1520543522.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:02.466Z,1520543522.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:02.916Z,1520543522.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:03.272Z,1520543523.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:03.669Z,1520543523.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:04.058Z,1520543524.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:04.462Z,1520543524.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:04.864Z,1520543524.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:05.266Z,1520543525.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:05.661Z,1520543525.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:06.067Z,1520543526.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:06.475Z,1520543526.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:06.875Z,1520543526.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:07.273Z,1520543527.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:07.666Z,1520543527.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:08.066Z,1520543528.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:08.462Z,1520543528.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:08.868Z,1520543528.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:09.274Z,1520543529.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:09.669Z,1520543529.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:10.026Z,1520543530.026 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-03-08T21:12:10.026Z,1520543530.026 [DropWeight] Hardware Fault, FailCount= 1
2018-03-08T21:12:10.026Z,1520543530.026 [DropWeight](ERROR): Hardware Fault
2018-03-08T21:12:10.090Z,1520543530.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:10.109Z,1520543530.109 [CBIT](INFO): Critical error at 20180308T211210
2018-03-08T21:12:10.112Z,1520543530.112 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-03-08T21:12:10.112Z,1520543530.112 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-03-08T21:12:10.463Z,1520543530.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:10.474Z,1520543530.474 [CBIT](INFO): Critical error at 20180308T211210
2018-03-08T21:12:10.865Z,1520543530.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:11.265Z,1520543531.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:11.663Z,1520543531.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:12.067Z,1520543532.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:12.472Z,1520543532.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:12.874Z,1520543532.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:13.270Z,1520543533.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:13.665Z,1520543533.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:14.065Z,1520543534.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:14.466Z,1520543534.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:14.874Z,1520543534.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:15.274Z,1520543535.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:15.668Z,1520543535.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:16.065Z,1520543536.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:16.465Z,1520543536.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:16.865Z,1520543536.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:17.259Z,1520543537.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:17.671Z,1520543537.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:18.069Z,1520543538.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:18.471Z,1520543538.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:18.869Z,1520543538.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:19.266Z,1520543539.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:19.659Z,1520543539.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:20.066Z,1520543540.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:20.465Z,1520543540.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:20.869Z,1520543540.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:21.268Z,1520543541.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:21.672Z,1520543541.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:22.067Z,1520543542.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:22.460Z,1520543542.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:22.863Z,1520543542.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:23.267Z,1520543543.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:23.660Z,1520543543.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:24.071Z,1520543544.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:24.473Z,1520543544.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:24.875Z,1520543544.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:25.261Z,1520543545.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:25.662Z,1520543545.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:26.063Z,1520543546.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:26.465Z,1520543546.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:26.868Z,1520543546.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:27.275Z,1520543547.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:27.678Z,1520543547.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:28.065Z,1520543548.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:28.470Z,1520543548.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:28.866Z,1520543548.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:29.266Z,1520543549.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:29.659Z,1520543549.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:30.071Z,1520543550.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:30.470Z,1520543550.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:30.872Z,1520543550.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:31.269Z,1520543551.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:31.666Z,1520543551.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:32.066Z,1520543552.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:32.461Z,1520543552.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:32.879Z,1520543552.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:33.267Z,1520543553.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:33.672Z,1520543553.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:34.065Z,1520543554.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:34.470Z,1520543554.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:34.870Z,1520543554.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:35.265Z,1520543555.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:35.660Z,1520543555.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:36.074Z,1520543556.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:36.471Z,1520543556.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:36.874Z,1520543556.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:37.270Z,1520543557.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:37.666Z,1520543557.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:38.066Z,1520543558.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:38.463Z,1520543558.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:38.878Z,1520543558.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:39.267Z,1520543559.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:39.674Z,1520543559.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:40.066Z,1520543560.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:40.465Z,1520543560.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:43.620Z,1520543563.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:43.758Z,1520543563.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:44.148Z,1520543564.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:44.551Z,1520543564.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:44.946Z,1520543564.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:45.330Z,1520543565.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:45.726Z,1520543565.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:46.127Z,1520543566.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:46.528Z,1520543566.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:46.940Z,1520543566.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:47.330Z,1520543567.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:47.728Z,1520543567.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:48.125Z,1520543568.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:48.524Z,1520543568.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:48.925Z,1520543568.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:49.330Z,1520543569.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:49.726Z,1520543569.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:50.132Z,1520543570.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:50.539Z,1520543570.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:50.935Z,1520543570.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:51.330Z,1520543571.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:51.726Z,1520543571.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:52.135Z,1520543572.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:52.529Z,1520543572.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:52.939Z,1520543572.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:53.332Z,1520543573.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:53.732Z,1520543573.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:54.130Z,1520543574.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:54.524Z,1520543574.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:54.930Z,1520543574.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:55.328Z,1520543575.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:55.722Z,1520543575.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:56.131Z,1520543576.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:56.532Z,1520543576.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:56.932Z,1520543576.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:57.325Z,1520543577.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:57.726Z,1520543577.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:58.130Z,1520543578.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:58.529Z,1520543578.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:58.939Z,1520543578.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:59.337Z,1520543579.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:12:59.739Z,1520543579.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:00.130Z,1520543580.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:00.535Z,1520543580.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:00.935Z,1520543580.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:01.331Z,1520543581.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:01.735Z,1520543581.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:02.135Z,1520543582.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:02.537Z,1520543582.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:02.936Z,1520543582.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:03.335Z,1520543583.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:03.732Z,1520543583.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:04.131Z,1520543584.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:04.539Z,1520543584.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:04.938Z,1520543584.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:05.346Z,1520543585.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:05.739Z,1520543585.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:06.131Z,1520543586.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:06.527Z,1520543586.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:06.938Z,1520543586.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:07.333Z,1520543587.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:07.729Z,1520543587.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:08.139Z,1520543588.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:08.538Z,1520543588.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:08.939Z,1520543588.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:09.326Z,1520543589.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:09.726Z,1520543589.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:10.127Z,1520543590.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:10.527Z,1520543590.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:10.937Z,1520543590.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:11.339Z,1520543591.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:11.747Z,1520543591.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:12.130Z,1520543592.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:12.531Z,1520543592.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:12.933Z,1520543592.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:13.329Z,1520543593.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:13.730Z,1520543593.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:14.137Z,1520543594.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:14.544Z,1520543594.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:14.940Z,1520543594.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:15.335Z,1520543595.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:15.729Z,1520543595.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:16.130Z,1520543596.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:16.534Z,1520543596.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:16.936Z,1520543596.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:17.343Z,1520543597.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:17.740Z,1520543597.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:18.129Z,1520543598.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:18.535Z,1520543598.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:18.935Z,1520543598.935 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:18.935Z,1520543598.935 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 269
2018-03-08T21:13:18.935Z,1520543598.935 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T21:13:18.937Z,1520543598.937 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:18.937Z,1520543598.937 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 269
2018-03-08T21:13:18.938Z,1520543598.938 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T21:13:18.939Z,1520543598.939 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:18.939Z,1520543598.939 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 269
2018-03-08T21:13:18.939Z,1520543598.939 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T21:13:18.951Z,1520543598.951 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T21:13:18.951Z,1520543598.951 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T21:13:18.952Z,1520543598.952 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T21:13:19.344Z,1520543599.344 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T21:13:19.344Z,1520543599.344 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 269
2018-03-08T21:13:19.345Z,1520543599.345 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T21:13:19.345Z,1520543599.345 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 269
2018-03-08T21:13:19.345Z,1520543599.345 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T21:13:19.346Z,1520543599.346 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 269
2018-03-08T21:13:19.734Z,1520543599.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T21:13:19.734Z,1520543599.734 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:13:19.735Z,1520543599.735 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:13:19.735Z,1520543599.735 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T21:13:19.736Z,1520543599.736 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:13:19.736Z,1520543599.736 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:13:19.736Z,1520543599.736 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T21:13:19.737Z,1520543599.737 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:13:19.737Z,1520543599.737 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:13:20.137Z,1520543600.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T21:13:20.138Z,1520543600.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:20.546Z,1520543600.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T21:13:20.547Z,1520543600.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:20.940Z,1520543600.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T21:13:20.941Z,1520543600.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:21.331Z,1520543601.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T21:13:21.332Z,1520543601.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:21.727Z,1520543601.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T21:13:21.728Z,1520543601.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:22.128Z,1520543602.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T21:13:22.129Z,1520543602.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:22.537Z,1520543602.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T21:13:22.538Z,1520543602.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:22.936Z,1520543602.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T21:13:22.937Z,1520543602.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:23.340Z,1520543603.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T21:13:23.341Z,1520543603.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:23.740Z,1520543603.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T21:13:23.741Z,1520543603.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:24.128Z,1520543604.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T21:13:24.129Z,1520543604.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:24.535Z,1520543604.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T21:13:24.536Z,1520543604.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:24.930Z,1520543604.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T21:13:24.931Z,1520543604.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:25.329Z,1520543605.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T21:13:25.330Z,1520543605.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:25.735Z,1520543605.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T21:13:25.736Z,1520543605.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:26.136Z,1520543606.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T21:13:26.137Z,1520543606.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:26.536Z,1520543606.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T21:13:26.537Z,1520543606.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:26.940Z,1520543606.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T21:13:26.941Z,1520543606.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:27.335Z,1520543607.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T21:13:27.335Z,1520543607.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:27.727Z,1520543607.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T21:13:27.728Z,1520543607.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:28.131Z,1520543608.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T21:13:28.132Z,1520543608.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:28.530Z,1520543608.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T21:13:28.531Z,1520543608.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:28.936Z,1520543608.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T21:13:28.937Z,1520543608.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:29.340Z,1520543609.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T21:13:29.341Z,1520543609.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:29.736Z,1520543609.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T21:13:29.737Z,1520543609.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:30.127Z,1520543610.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T21:13:30.128Z,1520543610.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:30.530Z,1520543610.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T21:13:30.531Z,1520543610.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:30.927Z,1520543610.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T21:13:30.929Z,1520543610.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:31.336Z,1520543611.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T21:13:31.337Z,1520543611.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:31.730Z,1520543611.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T21:13:31.731Z,1520543611.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:32.136Z,1520543612.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T21:13:32.137Z,1520543612.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:32.536Z,1520543612.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T21:13:32.537Z,1520543612.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:32.941Z,1520543612.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T21:13:32.942Z,1520543612.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:33.330Z,1520543613.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T21:13:33.331Z,1520543613.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:33.729Z,1520543613.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T21:13:33.730Z,1520543613.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:34.128Z,1520543614.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T21:13:34.129Z,1520543614.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:34.542Z,1520543614.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T21:13:34.543Z,1520543614.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:34.944Z,1520543614.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T21:13:34.945Z,1520543614.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:35.350Z,1520543615.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T21:13:35.351Z,1520543615.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:35.754Z,1520543615.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T21:13:35.755Z,1520543615.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:36.116Z,1520543616.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T21:13:36.117Z,1520543616.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:36.546Z,1520543616.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T21:13:36.547Z,1520543616.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:36.943Z,1520543616.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T21:13:36.944Z,1520543616.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:37.347Z,1520543617.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T21:13:37.348Z,1520543617.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:37.719Z,1520543617.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T21:13:37.719Z,1520543617.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:38.145Z,1520543618.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T21:13:38.146Z,1520543618.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:38.549Z,1520543618.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T21:13:38.550Z,1520543618.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:38.948Z,1520543618.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:39.350Z,1520543619.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:39.725Z,1520543619.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:40.124Z,1520543620.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:40.526Z,1520543620.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:44.999Z,1520543624.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:45.152Z,1520543625.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:45.541Z,1520543625.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:45.991Z,1520543625.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:46.340Z,1520543626.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:46.712Z,1520543626.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:47.133Z,1520543627.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:47.532Z,1520543627.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:47.932Z,1520543627.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:48.309Z,1520543628.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:48.712Z,1520543628.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:49.115Z,1520543629.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:49.536Z,1520543629.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:49.943Z,1520543629.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:50.335Z,1520543630.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:50.736Z,1520543630.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:51.138Z,1520543631.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:51.538Z,1520543631.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:51.913Z,1520543631.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:52.312Z,1520543632.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:52.738Z,1520543632.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:53.135Z,1520543633.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:53.538Z,1520543633.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:53.920Z,1520543633.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:54.323Z,1520543634.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:54.735Z,1520543634.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:55.113Z,1520543635.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:55.516Z,1520543635.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:55.921Z,1520543635.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:56.340Z,1520543636.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:56.724Z,1520543636.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:57.122Z,1520543637.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:57.542Z,1520543637.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:57.923Z,1520543637.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:58.313Z,1520543638.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:58.721Z,1520543638.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:59.122Z,1520543639.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:59.519Z,1520543639.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:13:59.937Z,1520543639.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:00.315Z,1520543640.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:00.726Z,1520543640.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:01.138Z,1520543641.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:01.522Z,1520543641.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:01.924Z,1520543641.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:02.327Z,1520543642.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:02.726Z,1520543642.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:03.122Z,1520543643.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:03.514Z,1520543643.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:03.919Z,1520543643.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:04.364Z,1520543644.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:04.706Z,1520543644.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:05.116Z,1520543645.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:05.525Z,1520543645.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:05.927Z,1520543645.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:06.308Z,1520543646.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:06.707Z,1520543646.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:07.122Z,1520543647.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:07.518Z,1520543647.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:07.933Z,1520543647.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:08.326Z,1520543648.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:08.725Z,1520543648.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:09.115Z,1520543649.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:09.514Z,1520543649.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:09.913Z,1520543649.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:10.318Z,1520543650.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:10.715Z,1520543650.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:11.126Z,1520543651.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:11.525Z,1520543651.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:11.930Z,1520543651.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:12.321Z,1520543652.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:12.717Z,1520543652.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:13.114Z,1520543653.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:13.517Z,1520543653.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:13.928Z,1520543653.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:14.327Z,1520543654.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:14.731Z,1520543654.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:15.114Z,1520543655.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:15.528Z,1520543655.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:15.918Z,1520543655.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:16.317Z,1520543656.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:16.723Z,1520543656.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:17.131Z,1520543657.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:17.526Z,1520543657.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:17.928Z,1520543657.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:18.322Z,1520543658.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:18.713Z,1520543658.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:19.125Z,1520543659.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:19.526Z,1520543659.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:19.930Z,1520543659.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:20.339Z,1520543660.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:20.736Z,1520543660.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:21.106Z,1520543661.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:21.530Z,1520543661.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:21.913Z,1520543661.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:22.310Z,1520543662.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:22.719Z,1520543662.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:23.144Z,1520543663.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:23.517Z,1520543663.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:23.940Z,1520543663.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:24.314Z,1520543664.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:24.738Z,1520543664.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:25.119Z,1520543665.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:25.514Z,1520543665.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:25.943Z,1520543665.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:26.321Z,1520543666.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:26.744Z,1520543666.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:27.113Z,1520543667.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:27.514Z,1520543667.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:27.923Z,1520543667.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:28.334Z,1520543668.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:28.713Z,1520543668.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:29.116Z,1520543669.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:29.536Z,1520543669.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:29.942Z,1520543669.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:30.315Z,1520543670.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:30.707Z,1520543670.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:31.136Z,1520543671.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:31.523Z,1520543671.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:31.941Z,1520543671.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:32.342Z,1520543672.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:32.736Z,1520543672.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:33.134Z,1520543673.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:33.512Z,1520543673.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:33.913Z,1520543673.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:34.342Z,1520543674.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:34.737Z,1520543674.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:35.124Z,1520543675.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:35.519Z,1520543675.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:35.921Z,1520543675.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:36.315Z,1520543676.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:36.714Z,1520543676.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:37.119Z,1520543677.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:37.518Z,1520543677.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:37.919Z,1520543677.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:38.320Z,1520543678.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:38.718Z,1520543678.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:39.119Z,1520543679.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:39.519Z,1520543679.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:39.921Z,1520543679.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:40.310Z,1520543680.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:40.740Z,1520543680.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:43.850Z,1520543683.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:43.969Z,1520543683.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:44.344Z,1520543684.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:44.722Z,1520543684.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:45.127Z,1520543685.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:45.522Z,1520543685.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:45.932Z,1520543685.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:46.351Z,1520543686.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:46.753Z,1520543686.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:47.124Z,1520543687.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:47.517Z,1520543687.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:47.922Z,1520543687.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:48.318Z,1520543688.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:48.723Z,1520543688.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:49.154Z,1520543689.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:49.524Z,1520543689.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:49.932Z,1520543689.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:50.330Z,1520543690.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:50.726Z,1520543690.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:51.126Z,1520543691.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:51.531Z,1520543691.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:51.934Z,1520543691.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:52.338Z,1520543692.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:52.732Z,1520543692.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:53.125Z,1520543693.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:53.522Z,1520543693.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:53.923Z,1520543693.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:54.321Z,1520543694.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:54.722Z,1520543694.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:55.129Z,1520543695.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:55.535Z,1520543695.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:55.941Z,1520543695.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:56.331Z,1520543696.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:56.727Z,1520543696.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:57.126Z,1520543697.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:57.530Z,1520543697.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:57.931Z,1520543697.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:58.334Z,1520543698.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:58.731Z,1520543698.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:59.125Z,1520543699.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:59.522Z,1520543699.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:14:59.922Z,1520543699.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:00.334Z,1520543700.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:00.721Z,1520543700.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:01.131Z,1520543701.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:01.538Z,1520543701.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:01.937Z,1520543701.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:02.328Z,1520543702.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:02.734Z,1520543702.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:03.131Z,1520543703.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:03.530Z,1520543703.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:03.936Z,1520543703.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:04.332Z,1520543704.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:04.732Z,1520543704.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:05.134Z,1520543705.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:05.525Z,1520543705.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:05.924Z,1520543705.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:06.331Z,1520543706.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:06.724Z,1520543706.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:07.131Z,1520543707.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:07.532Z,1520543707.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:07.940Z,1520543707.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:08.330Z,1520543708.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:08.723Z,1520543708.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:09.131Z,1520543709.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:09.546Z,1520543709.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:09.954Z,1520543709.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:10.335Z,1520543710.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:10.732Z,1520543710.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:11.134Z,1520543711.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:11.530Z,1520543711.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:11.927Z,1520543711.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:12.329Z,1520543712.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:12.729Z,1520543712.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:13.154Z,1520543713.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:13.542Z,1520543713.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:13.940Z,1520543713.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:14.338Z,1520543714.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:14.730Z,1520543714.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:15.125Z,1520543715.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:15.530Z,1520543715.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:15.946Z,1520543715.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:16.339Z,1520543716.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:16.750Z,1520543716.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:17.118Z,1520543717.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:17.520Z,1520543717.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:17.923Z,1520543717.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:18.325Z,1520543718.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:18.719Z,1520543718.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:19.125Z,1520543719.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:19.549Z,1520543719.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:19.931Z,1520543719.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:20.322Z,1520543720.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:20.727Z,1520543720.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:21.128Z,1520543721.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:21.526Z,1520543721.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:21.953Z,1520543721.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:22.335Z,1520543722.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:22.732Z,1520543722.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:23.125Z,1520543723.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:23.526Z,1520543723.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:23.927Z,1520543723.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:24.327Z,1520543724.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:24.727Z,1520543724.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:25.127Z,1520543725.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:25.539Z,1520543725.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:25.935Z,1520543725.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:26.327Z,1520543726.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:26.725Z,1520543726.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:27.128Z,1520543727.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:27.529Z,1520543727.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:27.932Z,1520543727.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:28.338Z,1520543728.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:28.738Z,1520543728.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:29.130Z,1520543729.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:29.534Z,1520543729.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:29.921Z,1520543729.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:30.327Z,1520543730.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:30.720Z,1520543730.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:31.137Z,1520543731.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:31.535Z,1520543731.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:31.939Z,1520543731.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:32.324Z,1520543732.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:32.721Z,1520543732.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:33.127Z,1520543733.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:33.527Z,1520543733.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:33.928Z,1520543733.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:34.338Z,1520543734.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:34.738Z,1520543734.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:35.132Z,1520543735.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:35.534Z,1520543735.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:35.928Z,1520543735.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:36.322Z,1520543736.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:36.727Z,1520543736.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:37.131Z,1520543737.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:37.532Z,1520543737.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:37.938Z,1520543737.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:38.326Z,1520543738.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:38.729Z,1520543738.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:39.127Z,1520543739.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:39.527Z,1520543739.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:39.962Z,1520543739.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:39.965Z,1520543739.965 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T21:15:39.965Z,1520543739.965 [Default:CheckIn:C.Wait] Stopped
2018-03-08T21:15:39.965Z,1520543739.965 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T21:15:39.965Z,1520543739.965 [Default:CheckIn:D] Running Loop=1
2018-03-08T21:15:40.362Z,1520543740.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:40.370Z,1520543740.370 [Default:CheckIn:D] Stopped
2018-03-08T21:15:40.370Z,1520543740.370 [Default:CheckIn:E] Running Loop=1
2018-03-08T21:15:40.788Z,1520543740.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:40.799Z,1520543740.799 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 809.926107 min 
2018-03-08T21:15:40.799Z,1520543740.799 [Default:CheckIn:E] Stopped
2018-03-08T21:15:40.800Z,1520543740.800 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T21:15:40.800Z,1520543740.800 [Default:CheckIn] Stopped
2018-03-08T21:15:40.800Z,1520543740.800 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T21:15:40.800Z,1520543740.800 [Default:CheckIn](INFO): Running loop #79
2018-03-08T21:15:40.800Z,1520543740.800 [Default:CheckIn] Running Loop=79
2018-03-08T21:15:40.800Z,1520543740.800 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T21:15:40.800Z,1520543740.800 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T21:15:45.977Z,1520543745.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:46.114Z,1520543746.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:46.468Z,1520543746.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:46.874Z,1520543746.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:47.292Z,1520543747.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:47.646Z,1520543747.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:48.045Z,1520543748.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:48.443Z,1520543748.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:48.867Z,1520543748.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:49.266Z,1520543749.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:49.645Z,1520543749.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:50.046Z,1520543750.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:50.446Z,1520543750.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:50.840Z,1520543750.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:51.274Z,1520543751.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:51.651Z,1520543751.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:52.049Z,1520543752.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:52.452Z,1520543752.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:52.848Z,1520543752.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:53.238Z,1520543753.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:53.681Z,1520543753.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:54.039Z,1520543754.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:54.446Z,1520543754.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:54.846Z,1520543754.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:55.255Z,1520543755.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:55.670Z,1520543755.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:56.050Z,1520543756.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:56.455Z,1520543756.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:56.849Z,1520543756.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:57.247Z,1520543757.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:57.642Z,1520543757.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:58.045Z,1520543758.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:58.483Z,1520543758.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:58.851Z,1520543758.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:59.243Z,1520543759.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:15:59.645Z,1520543759.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:00.052Z,1520543760.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:00.451Z,1520543760.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:00.859Z,1520543760.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:01.255Z,1520543761.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:01.652Z,1520543761.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:02.054Z,1520543762.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:02.447Z,1520543762.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:02.841Z,1520543762.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:03.246Z,1520543763.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:03.649Z,1520543763.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:04.058Z,1520543764.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:04.456Z,1520543764.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:04.856Z,1520543764.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:05.245Z,1520543765.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:05.647Z,1520543765.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:06.051Z,1520543766.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:06.444Z,1520543766.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:06.861Z,1520543766.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:07.261Z,1520543767.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:07.656Z,1520543767.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:08.054Z,1520543768.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:08.449Z,1520543768.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:08.853Z,1520543768.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:09.252Z,1520543769.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:09.652Z,1520543769.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:10.059Z,1520543770.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:10.461Z,1520543770.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:10.855Z,1520543770.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:11.231Z,1520543771.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:11.658Z,1520543771.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:12.059Z,1520543772.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:12.456Z,1520543772.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:12.863Z,1520543772.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:13.260Z,1520543773.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:13.665Z,1520543773.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:14.057Z,1520543774.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:14.460Z,1520543774.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:14.831Z,1520543774.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:15.238Z,1520543775.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:15.641Z,1520543775.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:16.063Z,1520543776.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:16.468Z,1520543776.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:16.863Z,1520543776.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:17.232Z,1520543777.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:17.639Z,1520543777.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:18.067Z,1520543778.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:18.438Z,1520543778.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:18.864Z,1520543778.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:19.267Z,1520543779.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:19.644Z,1520543779.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:20.069Z,1520543780.069 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:20.069Z,1520543780.069 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 270
2018-03-08T21:16:20.069Z,1520543780.069 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T21:16:20.071Z,1520543780.071 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:20.071Z,1520543780.071 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 270
2018-03-08T21:16:20.071Z,1520543780.071 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T21:16:20.073Z,1520543780.073 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:20.073Z,1520543780.073 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 270
2018-03-08T21:16:20.073Z,1520543780.073 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T21:16:20.086Z,1520543780.086 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T21:16:20.086Z,1520543780.086 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T21:16:20.086Z,1520543780.086 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T21:16:20.478Z,1520543780.478 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T21:16:20.478Z,1520543780.478 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 270
2018-03-08T21:16:20.479Z,1520543780.479 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T21:16:20.479Z,1520543780.479 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 270
2018-03-08T21:16:20.479Z,1520543780.479 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T21:16:20.479Z,1520543780.479 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 270
2018-03-08T21:16:20.842Z,1520543780.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T21:16:20.842Z,1520543780.842 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:16:20.842Z,1520543780.842 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:16:20.843Z,1520543780.843 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T21:16:20.843Z,1520543780.843 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:16:20.844Z,1520543780.844 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:16:20.844Z,1520543780.844 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T21:16:20.845Z,1520543780.845 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:16:20.845Z,1520543780.845 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:16:21.254Z,1520543781.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T21:16:21.255Z,1520543781.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:21.645Z,1520543781.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T21:16:21.646Z,1520543781.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:22.052Z,1520543782.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T21:16:22.053Z,1520543782.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:22.452Z,1520543782.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T21:16:22.453Z,1520543782.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:22.855Z,1520543782.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T21:16:22.856Z,1520543782.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:23.249Z,1520543783.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T21:16:23.250Z,1520543783.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:23.654Z,1520543783.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T21:16:23.655Z,1520543783.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:24.049Z,1520543784.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T21:16:24.050Z,1520543784.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:24.454Z,1520543784.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T21:16:24.455Z,1520543784.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:24.852Z,1520543784.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T21:16:24.853Z,1520543784.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:25.256Z,1520543785.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T21:16:25.257Z,1520543785.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:25.651Z,1520543785.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T21:16:25.652Z,1520543785.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:26.050Z,1520543786.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T21:16:26.051Z,1520543786.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:26.450Z,1520543786.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T21:16:26.451Z,1520543786.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:26.842Z,1520543786.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T21:16:26.843Z,1520543786.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:27.253Z,1520543787.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T21:16:27.254Z,1520543787.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:27.651Z,1520543787.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T21:16:27.652Z,1520543787.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:28.054Z,1520543788.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T21:16:28.055Z,1520543788.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:28.464Z,1520543788.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T21:16:28.465Z,1520543788.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:28.870Z,1520543788.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T21:16:28.871Z,1520543788.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:29.238Z,1520543789.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T21:16:29.239Z,1520543789.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:29.662Z,1520543789.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T21:16:29.663Z,1520543789.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:30.039Z,1520543790.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T21:16:30.040Z,1520543790.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:30.466Z,1520543790.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T21:16:30.467Z,1520543790.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:30.871Z,1520543790.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T21:16:30.872Z,1520543790.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:31.271Z,1520543791.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T21:16:31.273Z,1520543791.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:31.652Z,1520543791.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T21:16:31.669Z,1520543791.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:32.043Z,1520543792.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T21:16:32.044Z,1520543792.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:32.451Z,1520543792.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T21:16:32.452Z,1520543792.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:32.846Z,1520543792.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T21:16:32.847Z,1520543792.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:33.251Z,1520543793.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T21:16:33.252Z,1520543793.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:33.654Z,1520543793.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T21:16:33.655Z,1520543793.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:34.052Z,1520543794.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T21:16:34.053Z,1520543794.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:34.456Z,1520543794.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T21:16:34.457Z,1520543794.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:34.852Z,1520543794.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T21:16:34.853Z,1520543794.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:35.250Z,1520543795.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T21:16:35.251Z,1520543795.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:35.649Z,1520543795.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T21:16:35.649Z,1520543795.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:36.050Z,1520543796.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T21:16:36.051Z,1520543796.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:36.449Z,1520543796.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T21:16:36.450Z,1520543796.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:36.852Z,1520543796.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T21:16:36.853Z,1520543796.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:37.253Z,1520543797.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T21:16:37.254Z,1520543797.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:37.652Z,1520543797.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T21:16:37.653Z,1520543797.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:38.054Z,1520543798.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T21:16:38.055Z,1520543798.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:38.450Z,1520543798.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T21:16:38.451Z,1520543798.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:38.849Z,1520543798.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T21:16:38.850Z,1520543798.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:39.247Z,1520543799.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T21:16:39.248Z,1520543799.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:39.650Z,1520543799.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T21:16:39.650Z,1520543799.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:40.052Z,1520543800.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T21:16:40.053Z,1520543800.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:40.452Z,1520543800.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:40.852Z,1520543800.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:43.947Z,1520543803.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:44.081Z,1520543804.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:44.434Z,1520543804.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:44.834Z,1520543804.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:45.232Z,1520543805.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:45.631Z,1520543805.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:46.027Z,1520543806.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:46.415Z,1520543806.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:46.786Z,1520543806.786 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T21:16:46.786Z,1520543806.786 [NAL9602] Data Fault, FailCount= 5
2018-03-08T21:16:46.786Z,1520543806.786 [NAL9602](ERROR): Data Fault
2018-03-08T21:16:46.819Z,1520543806.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:46.865Z,1520543806.865 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T21:16:46.865Z,1520543806.865 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-08T21:16:47.182Z,1520543807.182 [NAL9602](INFO): Powering down
2018-03-08T21:16:47.214Z,1520543807.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:47.250Z,1520543807.250 [CBIT](INFO): Critical error at 20180308T211646
2018-03-08T21:16:47.614Z,1520543807.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:48.015Z,1520543808.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:48.417Z,1520543808.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:48.812Z,1520543808.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:49.216Z,1520543809.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:49.614Z,1520543809.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:50.013Z,1520543810.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:50.415Z,1520543810.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:50.817Z,1520543810.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:51.213Z,1520543811.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:51.614Z,1520543811.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:52.017Z,1520543812.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:52.413Z,1520543812.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:52.816Z,1520543812.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:53.213Z,1520543813.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:53.609Z,1520543813.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:54.014Z,1520543814.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:54.415Z,1520543814.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:54.812Z,1520543814.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:55.214Z,1520543815.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:55.614Z,1520543815.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:56.013Z,1520543816.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:56.418Z,1520543816.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:56.818Z,1520543816.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:57.219Z,1520543817.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:57.612Z,1520543817.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:58.017Z,1520543818.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:58.412Z,1520543818.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:58.813Z,1520543818.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:59.218Z,1520543819.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:16:59.612Z,1520543819.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:00.017Z,1520543820.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:00.423Z,1520543820.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:00.809Z,1520543820.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:01.215Z,1520543821.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:01.617Z,1520543821.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:02.011Z,1520543822.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:02.413Z,1520543822.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:02.822Z,1520543822.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:03.214Z,1520543823.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:03.614Z,1520543823.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:04.015Z,1520543824.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:04.412Z,1520543824.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:04.817Z,1520543824.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:05.219Z,1520543825.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:05.612Z,1520543825.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:06.021Z,1520543826.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:06.417Z,1520543826.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:06.818Z,1520543826.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:07.215Z,1520543827.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:07.618Z,1520543827.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:08.018Z,1520543828.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:08.417Z,1520543828.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:08.818Z,1520543828.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:09.217Z,1520543829.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:09.616Z,1520543829.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:10.019Z,1520543830.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:10.414Z,1520543830.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:10.820Z,1520543830.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:11.214Z,1520543831.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:11.615Z,1520543831.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:12.011Z,1520543832.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:12.415Z,1520543832.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:12.818Z,1520543832.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:13.222Z,1520543833.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:13.618Z,1520543833.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:14.014Z,1520543834.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:14.414Z,1520543834.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:14.819Z,1520543834.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:15.218Z,1520543835.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:15.616Z,1520543835.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:16.017Z,1520543836.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:16.415Z,1520543836.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:16.817Z,1520543836.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:17.218Z,1520543837.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:17.618Z,1520543837.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:18.013Z,1520543838.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:18.411Z,1520543838.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:18.811Z,1520543838.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:19.217Z,1520543839.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:19.612Z,1520543839.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:20.011Z,1520543840.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:20.414Z,1520543840.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:20.812Z,1520543840.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:21.218Z,1520543841.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:21.617Z,1520543841.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:22.014Z,1520543842.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:22.415Z,1520543842.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:22.815Z,1520543842.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:23.238Z,1520543843.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:23.614Z,1520543843.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:24.014Z,1520543844.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:24.414Z,1520543844.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:24.815Z,1520543844.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:25.225Z,1520543845.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:25.627Z,1520543845.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:26.021Z,1520543846.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:26.417Z,1520543846.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:26.818Z,1520543846.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:27.225Z,1520543847.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:27.628Z,1520543847.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:28.005Z,1520543848.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:28.406Z,1520543848.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:28.812Z,1520543848.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:29.210Z,1520543849.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:29.610Z,1520543849.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:30.012Z,1520543850.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:30.403Z,1520543850.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:30.809Z,1520543850.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:31.213Z,1520543851.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:31.603Z,1520543851.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:32.013Z,1520543852.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:32.416Z,1520543852.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:32.808Z,1520543852.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:33.214Z,1520543853.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:33.616Z,1520543853.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:34.009Z,1520543854.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:34.416Z,1520543854.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:34.816Z,1520543854.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:35.208Z,1520543855.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:35.618Z,1520543855.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:36.017Z,1520543856.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:36.409Z,1520543856.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:36.817Z,1520543856.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:37.216Z,1520543857.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:37.607Z,1520543857.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:38.017Z,1520543858.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:38.416Z,1520543858.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:38.809Z,1520543858.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:39.217Z,1520543859.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:39.617Z,1520543859.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:40.009Z,1520543860.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:40.414Z,1520543860.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:40.817Z,1520543860.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:41.210Z,1520543861.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:45.599Z,1520543865.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:45.751Z,1520543865.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:46.137Z,1520543866.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:46.515Z,1520543866.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:46.916Z,1520543866.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:47.291Z,1520543867.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:47.717Z,1520543867.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:48.094Z,1520543868.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:48.500Z,1520543868.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:48.895Z,1520543868.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:49.301Z,1520543869.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:49.689Z,1520543869.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:50.101Z,1520543870.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:50.499Z,1520543870.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:50.900Z,1520543870.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:51.301Z,1520543871.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:51.706Z,1520543871.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:52.092Z,1520543872.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:52.501Z,1520543872.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:52.901Z,1520543872.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:53.294Z,1520543873.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:53.699Z,1520543873.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:54.101Z,1520543874.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:54.499Z,1520543874.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:54.901Z,1520543874.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:55.301Z,1520543875.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:55.697Z,1520543875.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:56.105Z,1520543876.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:56.506Z,1520543876.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:56.902Z,1520543876.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:57.306Z,1520543877.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:57.698Z,1520543877.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:58.102Z,1520543878.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:58.499Z,1520543878.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:58.906Z,1520543878.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:59.298Z,1520543879.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:17:59.697Z,1520543879.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:00.106Z,1520543880.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:00.499Z,1520543880.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:00.897Z,1520543880.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:01.299Z,1520543881.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:01.699Z,1520543881.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:02.095Z,1520543882.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:02.508Z,1520543882.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:02.907Z,1520543882.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:03.295Z,1520543883.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:03.703Z,1520543883.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:04.096Z,1520543884.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:04.493Z,1520543884.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:04.909Z,1520543884.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:05.302Z,1520543885.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:05.697Z,1520543885.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:06.108Z,1520543886.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:06.503Z,1520543886.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:06.898Z,1520543886.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:07.309Z,1520543887.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:07.704Z,1520543887.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:08.099Z,1520543888.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:08.504Z,1520543888.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:08.900Z,1520543888.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:09.300Z,1520543889.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:09.703Z,1520543889.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:10.106Z,1520543890.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:10.505Z,1520543890.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:10.905Z,1520543890.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:11.310Z,1520543891.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:11.705Z,1520543891.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:12.109Z,1520543892.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:12.506Z,1520543892.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:12.905Z,1520543892.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:13.309Z,1520543893.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:13.699Z,1520543893.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:14.104Z,1520543894.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:14.508Z,1520543894.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:14.903Z,1520543894.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:15.304Z,1520543895.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:15.708Z,1520543895.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:16.102Z,1520543896.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:16.502Z,1520543896.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:16.982Z,1520543896.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:17.306Z,1520543897.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:17.730Z,1520543897.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:18.108Z,1520543898.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:18.508Z,1520543898.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:18.905Z,1520543898.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:19.313Z,1520543899.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:19.717Z,1520543899.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:20.093Z,1520543900.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:20.494Z,1520543900.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:20.896Z,1520543900.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:21.289Z,1520543901.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:21.718Z,1520543901.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:22.093Z,1520543902.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:22.494Z,1520543902.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:22.901Z,1520543902.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:23.294Z,1520543903.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:23.693Z,1520543903.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:24.101Z,1520543904.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:24.500Z,1520543904.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:24.892Z,1520543904.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:25.301Z,1520543905.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:25.700Z,1520543905.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:26.093Z,1520543906.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:26.506Z,1520543906.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:26.901Z,1520543906.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:27.297Z,1520543907.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:27.701Z,1520543907.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:28.094Z,1520543908.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:28.497Z,1520543908.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:28.906Z,1520543908.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:29.297Z,1520543909.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:29.696Z,1520543909.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:30.098Z,1520543910.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:30.501Z,1520543910.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:30.896Z,1520543910.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:31.307Z,1520543911.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:31.699Z,1520543911.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:32.098Z,1520543912.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:32.503Z,1520543912.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:32.897Z,1520543912.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:33.298Z,1520543913.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:33.702Z,1520543913.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:34.098Z,1520543914.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:34.499Z,1520543914.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:34.902Z,1520543914.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:35.297Z,1520543915.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:35.698Z,1520543915.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:36.103Z,1520543916.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:36.501Z,1520543916.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:36.898Z,1520543916.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:37.299Z,1520543917.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:37.702Z,1520543917.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:38.104Z,1520543918.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:38.502Z,1520543918.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:38.902Z,1520543918.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:39.294Z,1520543919.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:39.696Z,1520543919.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:40.102Z,1520543920.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:40.497Z,1520543920.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:40.903Z,1520543920.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:41.297Z,1520543921.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:44.434Z,1520543924.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:44.571Z,1520543924.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:44.906Z,1520543924.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:45.305Z,1520543925.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:45.702Z,1520543925.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:46.102Z,1520543926.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:46.502Z,1520543926.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:46.898Z,1520543926.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:46.911Z,1520543926.911 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T21:18:46.911Z,1520543926.911 [NAL9602] No Fault, FailCount= 5
2018-03-08T21:18:47.270Z,1520543927.270 [NAL9602](INFO): Powering up NAL9602
2018-03-08T21:18:47.319Z,1520543927.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:47.707Z,1520543927.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:48.106Z,1520543928.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:48.507Z,1520543928.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:48.906Z,1520543928.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:49.306Z,1520543929.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:49.707Z,1520543929.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:50.106Z,1520543930.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:50.507Z,1520543930.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:50.906Z,1520543930.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:51.305Z,1520543931.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:51.702Z,1520543931.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:52.129Z,1520543932.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:52.501Z,1520543932.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:52.902Z,1520543932.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:53.307Z,1520543933.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:53.705Z,1520543933.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:54.106Z,1520543934.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:54.508Z,1520543934.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:54.905Z,1520543934.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:55.298Z,1520543935.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:55.705Z,1520543935.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:56.103Z,1520543936.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:56.507Z,1520543936.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:56.983Z,1520543936.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:57.298Z,1520543937.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:57.691Z,1520543937.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:58.108Z,1520543938.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:58.467Z,1520543938.467 [NAL9602](INFO): NAL9602 initialized
2018-03-08T21:18:58.499Z,1520543938.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:58.895Z,1520543938.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:59.318Z,1520543939.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:18:59.728Z,1520543939.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:00.111Z,1520543940.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:00.499Z,1520543940.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:00.907Z,1520543940.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:01.315Z,1520543941.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:01.722Z,1520543941.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:02.122Z,1520543942.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:02.523Z,1520543942.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:02.919Z,1520543942.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:03.299Z,1520543943.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:03.701Z,1520543943.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:04.126Z,1520543944.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:04.535Z,1520543944.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:04.925Z,1520543944.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:05.306Z,1520543945.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:05.711Z,1520543945.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:06.105Z,1520543946.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:06.535Z,1520543946.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:06.908Z,1520543946.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:07.307Z,1520543947.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:07.706Z,1520543947.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:08.134Z,1520543948.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:08.534Z,1520543948.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:08.912Z,1520543948.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:09.307Z,1520543949.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:09.706Z,1520543949.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:10.134Z,1520543950.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:10.519Z,1520543950.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:10.908Z,1520543950.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:11.315Z,1520543951.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:11.706Z,1520543951.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:12.120Z,1520543952.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:12.516Z,1520543952.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:12.913Z,1520543952.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:13.308Z,1520543953.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:13.706Z,1520543953.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:14.113Z,1520543954.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:14.512Z,1520543954.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:14.912Z,1520543954.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:15.315Z,1520543955.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:15.707Z,1520543955.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:16.112Z,1520543956.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:16.516Z,1520543956.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:16.912Z,1520543956.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:17.308Z,1520543957.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:17.710Z,1520543957.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:18.112Z,1520543958.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:18.513Z,1520543958.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:18.911Z,1520543958.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:19.309Z,1520543959.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:19.707Z,1520543959.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:20.112Z,1520543960.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:20.517Z,1520543960.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:20.948Z,1520543960.948 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:20.949Z,1520543960.949 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 271
2018-03-08T21:19:20.949Z,1520543960.949 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T21:19:20.950Z,1520543960.950 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:20.951Z,1520543960.951 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 271
2018-03-08T21:19:20.951Z,1520543960.951 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T21:19:20.952Z,1520543960.952 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:20.961Z,1520543960.961 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 271
2018-03-08T21:19:20.961Z,1520543960.961 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T21:19:20.993Z,1520543960.993 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T21:19:20.993Z,1520543960.993 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T21:19:20.994Z,1520543960.994 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T21:19:21.319Z,1520543961.319 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T21:19:21.319Z,1520543961.319 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 271
2018-03-08T21:19:21.320Z,1520543961.320 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T21:19:21.320Z,1520543961.320 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 271
2018-03-08T21:19:21.320Z,1520543961.320 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T21:19:21.320Z,1520543961.320 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 271
2018-03-08T21:19:21.724Z,1520543961.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T21:19:21.724Z,1520543961.724 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:19:21.737Z,1520543961.737 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:19:21.737Z,1520543961.737 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T21:19:21.737Z,1520543961.737 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:19:21.738Z,1520543961.738 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:19:21.738Z,1520543961.738 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T21:19:21.739Z,1520543961.739 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:19:21.739Z,1520543961.739 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:19:22.127Z,1520543962.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T21:19:22.128Z,1520543962.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:22.582Z,1520543962.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-03-08T21:19:22.583Z,1520543962.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:22.930Z,1520543962.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T21:19:22.931Z,1520543962.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:23.306Z,1520543963.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T21:19:23.307Z,1520543963.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:23.702Z,1520543963.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T21:19:23.703Z,1520543963.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:24.112Z,1520543964.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T21:19:24.113Z,1520543964.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:24.511Z,1520543964.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T21:19:24.512Z,1520543964.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:24.908Z,1520543964.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T21:19:24.909Z,1520543964.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:25.305Z,1520543965.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T21:19:25.306Z,1520543965.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:25.706Z,1520543965.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T21:19:25.707Z,1520543965.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:26.120Z,1520543966.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T21:19:26.141Z,1520543966.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:26.511Z,1520543966.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T21:19:26.512Z,1520543966.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:26.911Z,1520543966.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T21:19:26.912Z,1520543966.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:27.309Z,1520543967.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T21:19:27.310Z,1520543967.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:27.708Z,1520543967.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T21:19:27.709Z,1520543967.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:28.111Z,1520543968.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T21:19:28.112Z,1520543968.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:28.524Z,1520543968.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T21:19:28.529Z,1520543968.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:28.920Z,1520543968.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T21:19:28.921Z,1520543968.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:29.309Z,1520543969.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T21:19:29.310Z,1520543969.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:29.714Z,1520543969.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T21:19:29.715Z,1520543969.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:30.120Z,1520543970.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T21:19:30.121Z,1520543970.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:30.522Z,1520543970.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T21:19:30.523Z,1520543970.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:30.919Z,1520543970.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T21:19:30.920Z,1520543970.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:31.310Z,1520543971.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T21:19:31.311Z,1520543971.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:31.714Z,1520543971.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T21:19:31.715Z,1520543971.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:32.116Z,1520543972.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T21:19:32.117Z,1520543972.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:32.519Z,1520543972.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T21:19:32.520Z,1520543972.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:32.923Z,1520543972.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T21:19:32.924Z,1520543972.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:33.308Z,1520543973.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T21:19:33.309Z,1520543973.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:33.714Z,1520543973.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T21:19:33.714Z,1520543973.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:34.119Z,1520543974.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T21:19:34.120Z,1520543974.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:34.526Z,1520543974.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T21:19:34.527Z,1520543974.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:34.919Z,1520543974.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T21:19:34.920Z,1520543974.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:35.309Z,1520543975.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T21:19:35.310Z,1520543975.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:35.714Z,1520543975.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T21:19:35.715Z,1520543975.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:36.116Z,1520543976.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T21:19:36.117Z,1520543976.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:36.526Z,1520543976.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T21:19:36.527Z,1520543976.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:36.920Z,1520543976.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T21:19:36.921Z,1520543976.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:37.308Z,1520543977.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T21:19:37.309Z,1520543977.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:37.714Z,1520543977.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T21:19:37.715Z,1520543977.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:38.116Z,1520543978.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T21:19:38.118Z,1520543978.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:38.519Z,1520543978.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T21:19:38.520Z,1520543978.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:38.926Z,1520543978.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T21:19:38.927Z,1520543978.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:39.308Z,1520543979.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T21:19:39.309Z,1520543979.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:39.712Z,1520543979.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T21:19:39.713Z,1520543979.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:40.115Z,1520543980.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T21:19:40.116Z,1520543980.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:40.519Z,1520543980.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T21:19:40.520Z,1520543980.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:40.917Z,1520543980.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T21:19:40.918Z,1520543980.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:41.366Z,1520543981.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:45.631Z,1520543985.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:45.778Z,1520543985.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:46.183Z,1520543986.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:46.559Z,1520543986.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:46.930Z,1520543986.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:47.350Z,1520543987.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:47.735Z,1520543987.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:48.164Z,1520543988.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:48.561Z,1520543988.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:48.962Z,1520543988.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:49.329Z,1520543989.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:49.730Z,1520543989.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:50.135Z,1520543990.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:50.531Z,1520543990.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:50.929Z,1520543990.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:51.362Z,1520543991.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:51.732Z,1520543991.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:52.132Z,1520543992.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:52.531Z,1520543992.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:52.930Z,1520543992.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:53.329Z,1520543993.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:53.735Z,1520543993.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:54.161Z,1520543994.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:54.541Z,1520543994.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:54.936Z,1520543994.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:55.327Z,1520543995.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:55.730Z,1520543995.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:56.134Z,1520543996.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:56.530Z,1520543996.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:56.935Z,1520543996.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:57.339Z,1520543997.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:57.740Z,1520543997.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:58.136Z,1520543998.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:58.527Z,1520543998.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:58.928Z,1520543998.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:59.349Z,1520543999.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:19:59.730Z,1520543999.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:00.138Z,1520544000.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:00.559Z,1520544000.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:00.936Z,1520544000.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:01.331Z,1520544001.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:01.730Z,1520544001.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:02.132Z,1520544002.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:02.559Z,1520544002.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:02.957Z,1520544002.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:03.327Z,1520544003.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:03.725Z,1520544003.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:04.137Z,1520544004.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:04.528Z,1520544004.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:04.937Z,1520544004.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:05.332Z,1520544005.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:05.739Z,1520544005.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:06.161Z,1520544006.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:06.539Z,1520544006.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:06.931Z,1520544006.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:07.334Z,1520544007.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:07.787Z,1520544007.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:08.139Z,1520544008.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:08.540Z,1520544008.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:08.970Z,1520544008.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:09.334Z,1520544009.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:09.729Z,1520544009.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:10.129Z,1520544010.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:10.574Z,1520544010.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:10.929Z,1520544010.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:11.351Z,1520544011.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:11.738Z,1520544011.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:12.140Z,1520544012.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:12.531Z,1520544012.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:12.934Z,1520544012.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:13.340Z,1520544013.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:13.739Z,1520544013.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:14.150Z,1520544014.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:14.548Z,1520544014.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:14.946Z,1520544014.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:15.337Z,1520544015.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:15.730Z,1520544015.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:16.142Z,1520544016.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:16.553Z,1520544016.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:16.946Z,1520544016.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:17.345Z,1520544017.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:17.719Z,1520544017.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:18.144Z,1520544018.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:18.547Z,1520544018.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:18.944Z,1520544018.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:19.326Z,1520544019.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:19.721Z,1520544019.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:20.149Z,1520544020.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:20.547Z,1520544020.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:20.954Z,1520544020.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:21.327Z,1520544021.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:21.730Z,1520544021.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:22.130Z,1520544022.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:22.531Z,1520544022.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:22.930Z,1520544022.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:23.358Z,1520544023.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:23.732Z,1520544023.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:24.157Z,1520544024.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:24.529Z,1520544024.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:24.939Z,1520544024.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:25.339Z,1520544025.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:25.734Z,1520544025.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:26.137Z,1520544026.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:26.541Z,1520544026.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:26.937Z,1520544026.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:27.325Z,1520544027.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:27.734Z,1520544027.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:28.135Z,1520544028.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:28.530Z,1520544028.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:28.934Z,1520544028.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:29.340Z,1520544029.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:29.739Z,1520544029.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:30.140Z,1520544030.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:30.534Z,1520544030.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:30.935Z,1520544030.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:31.334Z,1520544031.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:31.734Z,1520544031.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:32.140Z,1520544032.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:32.541Z,1520544032.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:32.946Z,1520544032.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:33.335Z,1520544033.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:33.734Z,1520544033.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:34.139Z,1520544034.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:34.536Z,1520544034.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:34.931Z,1520544034.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:35.341Z,1520544035.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:35.741Z,1520544035.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:36.140Z,1520544036.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:36.546Z,1520544036.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:36.939Z,1520544036.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:37.334Z,1520544037.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:37.739Z,1520544037.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:38.141Z,1520544038.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:38.540Z,1520544038.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:38.940Z,1520544038.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:39.340Z,1520544039.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:39.734Z,1520544039.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:40.139Z,1520544040.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:40.537Z,1520544040.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:40.935Z,1520544040.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:40.939Z,1520544040.939 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T21:15:40.8Z
2018-03-08T21:20:40.939Z,1520544040.939 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T21:20:40.939Z,1520544040.939 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T21:20:41.350Z,1520544041.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:44.535Z,1520544044.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:44.697Z,1520544044.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:44.969Z,1520544044.969 [DataOverHttps](INFO): Sending 123 bytes from file Logs/20180308T074127/Courier0316.lzma
2018-03-08T21:20:45.025Z,1520544045.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:45.406Z,1520544045.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:45.763Z,1520544045.763 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0316.lzma.bak
2018-03-08T21:20:45.763Z,1520544045.763 [DataOverHttps](INFO): SBD MOMSN=7989221
2018-03-08T21:20:45.801Z,1520544045.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:46.438Z,1520544046.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:46.638Z,1520544046.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:49.753Z,1520544049.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:49.886Z,1520544049.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:50.255Z,1520544050.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:50.649Z,1520544050.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:51.049Z,1520544051.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:51.453Z,1520544051.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:51.855Z,1520544051.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:54.957Z,1520544054.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:55.094Z,1520544055.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:55.409Z,1520544055.409 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0317.lzma
2018-03-08T21:20:55.459Z,1520544055.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:55.849Z,1520544055.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:56.203Z,1520544056.203 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0317.lzma.bak
2018-03-08T21:20:56.204Z,1520544056.204 [DataOverHttps](INFO): SBD MOMSN=7989226
2018-03-08T21:20:56.259Z,1520544056.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:56.842Z,1520544056.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:20:56.845Z,1520544056.845 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T21:20:56.845Z,1520544056.845 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T21:20:56.845Z,1520544056.845 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T21:20:57.058Z,1520544057.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:00.158Z,1520544060.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:00.306Z,1520544060.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:00.697Z,1520544060.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:01.066Z,1520544061.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:01.475Z,1520544061.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:01.869Z,1520544061.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:02.272Z,1520544062.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:02.693Z,1520544062.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:03.072Z,1520544063.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:03.463Z,1520544063.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:03.860Z,1520544063.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:04.267Z,1520544064.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:04.669Z,1520544064.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:05.061Z,1520544065.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:05.471Z,1520544065.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:05.871Z,1520544065.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:06.310Z,1520544066.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:06.669Z,1520544066.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:07.061Z,1520544067.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:07.466Z,1520544067.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:07.869Z,1520544067.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:08.272Z,1520544068.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:08.674Z,1520544068.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:09.072Z,1520544069.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:09.468Z,1520544069.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:09.862Z,1520544069.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:10.276Z,1520544070.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:10.669Z,1520544070.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:11.065Z,1520544071.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:11.471Z,1520544071.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:11.870Z,1520544071.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:12.274Z,1520544072.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:12.669Z,1520544072.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:13.069Z,1520544073.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:13.462Z,1520544073.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:13.866Z,1520544073.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:14.271Z,1520544074.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:14.674Z,1520544074.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:15.071Z,1520544075.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:15.468Z,1520544075.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:15.869Z,1520544075.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:16.264Z,1520544076.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:16.666Z,1520544076.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:17.070Z,1520544077.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:17.472Z,1520544077.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:17.871Z,1520544077.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:18.272Z,1520544078.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:18.664Z,1520544078.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:19.068Z,1520544079.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:19.463Z,1520544079.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:19.875Z,1520544079.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:20.272Z,1520544080.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:20.671Z,1520544080.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:21.078Z,1520544081.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:21.469Z,1520544081.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:21.864Z,1520544081.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:22.265Z,1520544082.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:22.666Z,1520544082.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:23.074Z,1520544083.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:23.476Z,1520544083.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:23.875Z,1520544083.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:24.278Z,1520544084.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:24.669Z,1520544084.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:25.066Z,1520544085.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:25.472Z,1520544085.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:25.865Z,1520544085.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:26.275Z,1520544086.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:26.683Z,1520544086.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:27.068Z,1520544087.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:27.461Z,1520544087.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:27.912Z,1520544087.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:28.266Z,1520544088.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:28.663Z,1520544088.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:29.059Z,1520544089.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:29.478Z,1520544089.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:29.923Z,1520544089.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:30.290Z,1520544090.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:30.671Z,1520544090.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:31.073Z,1520544091.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:31.477Z,1520544091.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:31.874Z,1520544091.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:32.284Z,1520544092.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:32.694Z,1520544092.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:33.098Z,1520544093.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:33.474Z,1520544093.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:33.855Z,1520544093.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:34.278Z,1520544094.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:34.662Z,1520544094.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:35.058Z,1520544095.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:35.491Z,1520544095.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:35.897Z,1520544095.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:36.292Z,1520544096.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:36.664Z,1520544096.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:37.069Z,1520544097.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:37.464Z,1520544097.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:37.867Z,1520544097.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:38.280Z,1520544098.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:38.667Z,1520544098.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:39.078Z,1520544099.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:39.469Z,1520544099.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:39.881Z,1520544099.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:40.274Z,1520544100.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:40.671Z,1520544100.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:41.076Z,1520544101.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:41.475Z,1520544101.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:41.876Z,1520544101.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:42.276Z,1520544102.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:42.670Z,1520544102.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:43.070Z,1520544103.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:43.468Z,1520544103.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:43.872Z,1520544103.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:44.312Z,1520544104.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:44.682Z,1520544104.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:45.080Z,1520544105.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:45.474Z,1520544105.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:45.871Z,1520544105.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:46.279Z,1520544106.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:46.686Z,1520544106.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:47.075Z,1520544107.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:47.481Z,1520544107.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:47.886Z,1520544107.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:48.272Z,1520544108.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:48.672Z,1520544108.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:49.083Z,1520544109.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:49.493Z,1520544109.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:49.878Z,1520544109.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:50.323Z,1520544110.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:50.692Z,1520544110.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:51.086Z,1520544111.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:51.472Z,1520544111.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:51.855Z,1520544111.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:52.266Z,1520544112.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:52.663Z,1520544112.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:53.064Z,1520544113.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:53.491Z,1520544113.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:53.891Z,1520544113.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:54.268Z,1520544114.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:54.667Z,1520544114.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:55.070Z,1520544115.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:55.467Z,1520544115.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:55.866Z,1520544115.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:56.279Z,1520544116.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:56.679Z,1520544116.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:57.085Z,1520544117.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:21:57.475Z,1520544117.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:01.278Z,1520544121.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:01.308Z,1520544121.308 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T21:22:01.414Z,1520544121.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:01.803Z,1520544121.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:02.171Z,1520544122.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:02.601Z,1520544122.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:02.972Z,1520544122.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:03.370Z,1520544123.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:03.759Z,1520544123.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:04.172Z,1520544124.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:04.627Z,1520544124.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:04.972Z,1520544124.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:05.361Z,1520544125.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:05.757Z,1520544125.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:06.160Z,1520544126.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:06.626Z,1520544126.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:06.962Z,1520544126.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:07.392Z,1520544127.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:07.789Z,1520544127.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:08.211Z,1520544128.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:08.566Z,1520544128.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:08.964Z,1520544128.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:09.367Z,1520544129.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:09.766Z,1520544129.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:10.168Z,1520544130.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:10.570Z,1520544130.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:10.968Z,1520544130.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:11.362Z,1520544131.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:11.763Z,1520544131.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:12.167Z,1520544132.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:12.568Z,1520544132.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:12.964Z,1520544132.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:13.380Z,1520544133.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:13.771Z,1520544133.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:14.206Z,1520544134.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:14.567Z,1520544134.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:14.967Z,1520544134.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:15.371Z,1520544135.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:15.775Z,1520544135.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:16.172Z,1520544136.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:16.571Z,1520544136.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:16.971Z,1520544136.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:17.369Z,1520544137.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:17.764Z,1520544137.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:18.170Z,1520544138.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:18.568Z,1520544138.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:18.964Z,1520544138.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:19.371Z,1520544139.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:19.771Z,1520544139.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:20.173Z,1520544140.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:20.569Z,1520544140.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:20.968Z,1520544140.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:21.363Z,1520544141.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:21.766Z,1520544141.766 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:21.766Z,1520544141.766 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 272
2018-03-08T21:22:21.766Z,1520544141.766 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T21:22:21.768Z,1520544141.768 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:21.768Z,1520544141.768 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 272
2018-03-08T21:22:21.768Z,1520544141.768 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T21:22:21.770Z,1520544141.770 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:21.770Z,1520544141.770 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 272
2018-03-08T21:22:21.770Z,1520544141.770 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T21:22:21.782Z,1520544141.782 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T21:22:21.782Z,1520544141.782 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T21:22:21.782Z,1520544141.782 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T21:22:22.201Z,1520544142.201 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T21:22:22.201Z,1520544142.201 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 272
2018-03-08T21:22:22.201Z,1520544142.201 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T21:22:22.201Z,1520544142.201 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 272
2018-03-08T21:22:22.202Z,1520544142.202 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T21:22:22.202Z,1520544142.202 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 272
2018-03-08T21:22:22.574Z,1520544142.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T21:22:22.575Z,1520544142.575 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:22:22.575Z,1520544142.575 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:22:22.576Z,1520544142.576 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T21:22:22.576Z,1520544142.576 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:22:22.577Z,1520544142.577 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:22:22.577Z,1520544142.577 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T21:22:22.577Z,1520544142.577 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:22:22.578Z,1520544142.578 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:22:22.975Z,1520544142.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T21:22:22.976Z,1520544142.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:23.364Z,1520544143.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T21:22:23.365Z,1520544143.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:23.771Z,1520544143.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T21:22:23.772Z,1520544143.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:24.170Z,1520544144.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T21:22:24.171Z,1520544144.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:24.568Z,1520544144.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T21:22:24.569Z,1520544144.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:24.964Z,1520544144.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T21:22:24.969Z,1520544144.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:25.380Z,1520544145.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T21:22:25.381Z,1520544145.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:25.779Z,1520544145.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T21:22:25.780Z,1520544145.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:26.173Z,1520544146.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T21:22:26.174Z,1520544146.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:26.574Z,1520544146.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T21:22:26.575Z,1520544146.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:26.974Z,1520544146.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T21:22:26.975Z,1520544146.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:27.372Z,1520544147.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T21:22:27.373Z,1520544147.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:27.767Z,1520544147.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T21:22:27.768Z,1520544147.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:28.174Z,1520544148.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T21:22:28.175Z,1520544148.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:28.576Z,1520544148.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T21:22:28.577Z,1520544148.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:28.979Z,1520544148.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T21:22:28.980Z,1520544148.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:29.374Z,1520544149.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T21:22:29.375Z,1520544149.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:29.759Z,1520544149.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T21:22:29.760Z,1520544149.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:30.171Z,1520544150.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T21:22:30.171Z,1520544150.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:30.573Z,1520544150.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T21:22:30.574Z,1520544150.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:30.951Z,1520544150.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T21:22:30.952Z,1520544150.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:31.380Z,1520544151.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T21:22:31.381Z,1520544151.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:31.778Z,1520544151.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T21:22:31.779Z,1520544151.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:32.182Z,1520544152.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T21:22:32.183Z,1520544152.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:32.576Z,1520544152.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T21:22:32.577Z,1520544152.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:32.977Z,1520544152.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T21:22:32.977Z,1520544152.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:33.377Z,1520544153.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T21:22:33.378Z,1520544153.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:33.775Z,1520544153.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T21:22:33.776Z,1520544153.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:34.180Z,1520544154.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T21:22:34.181Z,1520544154.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:34.582Z,1520544154.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T21:22:34.583Z,1520544154.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:34.978Z,1520544154.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T21:22:34.978Z,1520544154.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:35.383Z,1520544155.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T21:22:35.384Z,1520544155.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:35.755Z,1520544155.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T21:22:35.756Z,1520544155.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:36.162Z,1520544156.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T21:22:36.163Z,1520544156.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:36.562Z,1520544156.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T21:22:36.563Z,1520544156.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:36.967Z,1520544156.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T21:22:36.968Z,1520544156.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:37.387Z,1520544157.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T21:22:37.388Z,1520544157.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:37.783Z,1520544157.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T21:22:37.784Z,1520544157.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:38.195Z,1520544158.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T21:22:38.201Z,1520544158.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:38.571Z,1520544158.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T21:22:38.572Z,1520544158.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:38.969Z,1520544158.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T21:22:38.970Z,1520544158.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:39.372Z,1520544159.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T21:22:39.373Z,1520544159.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:39.770Z,1520544159.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T21:22:39.771Z,1520544159.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:40.171Z,1520544160.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T21:22:40.172Z,1520544160.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:40.573Z,1520544160.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T21:22:40.574Z,1520544160.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:40.973Z,1520544160.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T21:22:40.974Z,1520544160.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:41.368Z,1520544161.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T21:22:41.370Z,1520544161.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:41.769Z,1520544161.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:42.170Z,1520544162.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:42.567Z,1520544162.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:42.965Z,1520544162.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:43.379Z,1520544163.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:43.774Z,1520544163.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:44.176Z,1520544164.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:44.570Z,1520544164.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:44.966Z,1520544164.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:45.373Z,1520544165.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:45.766Z,1520544165.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:46.175Z,1520544166.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:46.576Z,1520544166.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:46.979Z,1520544166.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:47.365Z,1520544167.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:47.764Z,1520544167.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:48.167Z,1520544168.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:48.567Z,1520544168.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:48.960Z,1520544168.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:49.368Z,1520544169.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:49.779Z,1520544169.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:50.169Z,1520544170.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:50.566Z,1520544170.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:50.965Z,1520544170.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:51.368Z,1520544171.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:51.770Z,1520544171.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:52.173Z,1520544172.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:52.578Z,1520544172.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:52.972Z,1520544172.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:53.365Z,1520544173.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:53.765Z,1520544173.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:54.166Z,1520544174.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:54.568Z,1520544174.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:54.965Z,1520544174.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:55.371Z,1520544175.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:55.778Z,1520544175.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:56.172Z,1520544176.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:56.570Z,1520544176.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:56.966Z,1520544176.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:57.367Z,1520544177.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:22:57.769Z,1520544177.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:00.871Z,1520544180.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:01.010Z,1520544181.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:01.384Z,1520544181.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:01.772Z,1520544181.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:02.179Z,1520544182.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:02.568Z,1520544182.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:02.967Z,1520544182.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:03.373Z,1520544183.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:03.775Z,1520544183.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:04.176Z,1520544184.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:04.565Z,1520544184.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:04.967Z,1520544184.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:05.367Z,1520544185.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:05.770Z,1520544185.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:06.183Z,1520544186.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:06.580Z,1520544186.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:06.980Z,1520544186.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:07.371Z,1520544187.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:07.769Z,1520544187.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:08.169Z,1520544188.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:08.587Z,1520544188.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:08.979Z,1520544188.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:09.383Z,1520544189.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:09.791Z,1520544189.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:10.193Z,1520544190.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:10.564Z,1520544190.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:10.990Z,1520544190.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:11.373Z,1520544191.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:11.770Z,1520544191.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:12.206Z,1520544192.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:12.573Z,1520544192.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:12.973Z,1520544192.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:13.370Z,1520544193.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:13.773Z,1520544193.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:14.171Z,1520544194.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:14.569Z,1520544194.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:14.968Z,1520544194.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:15.372Z,1520544195.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:15.776Z,1520544195.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:16.174Z,1520544196.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:16.575Z,1520544196.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:16.970Z,1520544196.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:17.364Z,1520544197.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:17.766Z,1520544197.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:18.181Z,1520544198.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:18.578Z,1520544198.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:18.977Z,1520544198.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:19.370Z,1520544199.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:19.767Z,1520544199.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:20.176Z,1520544200.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:20.572Z,1520544200.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:20.969Z,1520544200.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:21.386Z,1520544201.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:21.779Z,1520544201.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:22.180Z,1520544202.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:22.571Z,1520544202.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:22.974Z,1520544202.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:23.366Z,1520544203.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:23.771Z,1520544203.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:24.176Z,1520544204.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:24.576Z,1520544204.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:24.973Z,1520544204.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:25.370Z,1520544205.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:25.771Z,1520544205.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:26.170Z,1520544206.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:26.570Z,1520544206.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:26.970Z,1520544206.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:27.386Z,1520544207.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:27.779Z,1520544207.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:28.186Z,1520544208.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:28.566Z,1520544208.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:28.967Z,1520544208.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:29.374Z,1520544209.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:29.771Z,1520544209.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:30.175Z,1520544210.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:30.578Z,1520544210.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:30.986Z,1520544210.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:31.371Z,1520544211.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:31.766Z,1520544211.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:32.186Z,1520544212.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:32.571Z,1520544212.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:32.966Z,1520544212.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:33.387Z,1520544213.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:33.779Z,1520544213.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:34.180Z,1520544214.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:34.571Z,1520544214.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:34.970Z,1520544214.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:35.366Z,1520544215.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:35.770Z,1520544215.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:36.179Z,1520544216.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:36.579Z,1520544216.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:36.979Z,1520544216.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:37.369Z,1520544217.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:37.764Z,1520544217.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:38.170Z,1520544218.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:38.568Z,1520544218.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:38.972Z,1520544218.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:39.380Z,1520544219.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:39.779Z,1520544219.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:40.180Z,1520544220.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:40.570Z,1520544220.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:40.969Z,1520544220.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:41.386Z,1520544221.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:41.798Z,1520544221.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:42.195Z,1520544222.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:42.584Z,1520544222.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:43.001Z,1520544223.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:43.362Z,1520544223.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:43.786Z,1520544223.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:44.188Z,1520544224.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:44.585Z,1520544224.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:45.002Z,1520544225.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:45.385Z,1520544225.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:45.789Z,1520544225.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:46.188Z,1520544226.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:46.562Z,1520544226.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:46.986Z,1520544226.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:47.362Z,1520544227.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:47.770Z,1520544227.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:48.189Z,1520544228.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:48.595Z,1520544228.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:48.989Z,1520544228.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:49.363Z,1520544229.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:49.764Z,1520544229.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:50.174Z,1520544230.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:50.565Z,1520544230.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:50.968Z,1520544230.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:51.369Z,1520544231.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:51.795Z,1520544231.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:52.197Z,1520544232.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:52.566Z,1520544232.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:52.968Z,1520544232.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:53.368Z,1520544233.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:53.766Z,1520544233.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:54.201Z,1520544234.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:54.576Z,1520544234.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:54.975Z,1520544234.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:55.370Z,1520544235.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:55.767Z,1520544235.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:56.166Z,1520544236.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:56.570Z,1520544236.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:56.971Z,1520544236.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:57.378Z,1520544237.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:23:57.815Z,1520544237.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:01.154Z,1520544241.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:01.270Z,1520544241.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:01.629Z,1520544241.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:02.020Z,1520544242.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:02.424Z,1520544242.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:02.826Z,1520544242.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:03.228Z,1520544243.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:03.667Z,1520544243.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:04.058Z,1520544244.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:04.431Z,1520544244.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:04.859Z,1520544244.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:05.231Z,1520544245.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:05.634Z,1520544245.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:06.035Z,1520544246.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:06.435Z,1520544246.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:06.834Z,1520544246.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:07.270Z,1520544247.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:07.631Z,1520544247.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:08.021Z,1520544248.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:08.431Z,1520544248.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:08.829Z,1520544248.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:09.232Z,1520544249.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:09.636Z,1520544249.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:10.038Z,1520544250.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:10.431Z,1520544250.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:10.834Z,1520544250.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:11.235Z,1520544251.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:11.630Z,1520544251.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:12.031Z,1520544252.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:12.435Z,1520544252.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:12.835Z,1520544252.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:13.242Z,1520544253.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:13.635Z,1520544253.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:14.029Z,1520544254.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:14.430Z,1520544254.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:14.825Z,1520544254.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:15.237Z,1520544255.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:15.636Z,1520544255.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:16.036Z,1520544256.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:16.431Z,1520544256.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:16.834Z,1520544256.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:17.235Z,1520544257.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:17.628Z,1520544257.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:18.030Z,1520544258.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:18.442Z,1520544258.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:18.836Z,1520544258.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:19.243Z,1520544259.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:19.634Z,1520544259.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:20.032Z,1520544260.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:20.431Z,1520544260.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:20.826Z,1520544260.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:21.242Z,1520544261.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:21.632Z,1520544261.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:22.037Z,1520544262.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:22.426Z,1520544262.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:22.835Z,1520544262.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:23.230Z,1520544263.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:23.634Z,1520544263.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:24.030Z,1520544264.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:24.446Z,1520544264.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:24.844Z,1520544264.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:25.240Z,1520544265.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:25.633Z,1520544265.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:26.028Z,1520544266.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:26.431Z,1520544266.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:26.833Z,1520544266.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:27.241Z,1520544267.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:27.632Z,1520544267.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:28.036Z,1520544268.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:28.430Z,1520544268.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:28.829Z,1520544268.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:29.233Z,1520544269.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:29.631Z,1520544269.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:30.030Z,1520544270.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:30.436Z,1520544270.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:30.840Z,1520544270.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:31.242Z,1520544271.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:31.632Z,1520544271.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:32.023Z,1520544272.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:32.430Z,1520544272.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:32.834Z,1520544272.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:33.240Z,1520544273.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:33.633Z,1520544273.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:34.036Z,1520544274.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:34.428Z,1520544274.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:34.833Z,1520544274.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:35.233Z,1520544275.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:35.628Z,1520544275.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:36.033Z,1520544276.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:36.437Z,1520544276.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:36.840Z,1520544276.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:37.237Z,1520544277.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:37.634Z,1520544277.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:38.026Z,1520544278.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:38.430Z,1520544278.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:38.834Z,1520544278.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:39.237Z,1520544279.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:39.636Z,1520544279.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:40.040Z,1520544280.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:40.430Z,1520544280.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:40.829Z,1520544280.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:41.235Z,1520544281.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:41.628Z,1520544281.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:42.034Z,1520544282.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:42.436Z,1520544282.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:42.840Z,1520544282.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:43.240Z,1520544283.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:43.633Z,1520544283.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:44.029Z,1520544284.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:44.430Z,1520544284.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:44.832Z,1520544284.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:45.240Z,1520544285.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:45.637Z,1520544285.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:46.041Z,1520544286.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:46.429Z,1520544286.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:46.824Z,1520544286.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:47.235Z,1520544287.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:47.630Z,1520544287.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:48.034Z,1520544288.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:48.436Z,1520544288.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:48.837Z,1520544288.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:49.240Z,1520544289.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:49.630Z,1520544289.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:50.028Z,1520544290.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:50.428Z,1520544290.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:50.830Z,1520544290.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:51.236Z,1520544291.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:51.636Z,1520544291.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:52.035Z,1520544292.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:52.428Z,1520544292.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:52.833Z,1520544292.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:53.233Z,1520544293.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:53.631Z,1520544293.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:54.031Z,1520544294.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:54.441Z,1520544294.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:54.840Z,1520544294.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:55.246Z,1520544295.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:55.632Z,1520544295.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:56.029Z,1520544296.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:56.434Z,1520544296.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:56.827Z,1520544296.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:57.237Z,1520544297.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:57.639Z,1520544297.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:24:58.046Z,1520544298.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:01.304Z,1520544301.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:01.430Z,1520544301.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:01.827Z,1520544301.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:02.228Z,1520544302.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:02.608Z,1520544302.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:03.000Z,1520544303.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:03.403Z,1520544303.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:03.798Z,1520544303.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:04.231Z,1520544304.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:04.610Z,1520544304.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:05.032Z,1520544305.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:05.403Z,1520544305.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:05.802Z,1520544305.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:06.200Z,1520544306.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:06.606Z,1520544306.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:06.998Z,1520544306.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:07.404Z,1520544307.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:07.830Z,1520544307.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:08.200Z,1520544308.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:08.599Z,1520544308.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:09.001Z,1520544309.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:09.398Z,1520544309.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:09.800Z,1520544309.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:10.230Z,1520544310.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:10.603Z,1520544310.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:11.004Z,1520544311.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:11.410Z,1520544311.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:11.803Z,1520544311.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:12.203Z,1520544312.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:12.605Z,1520544312.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:13.003Z,1520544313.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:13.404Z,1520544313.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:13.830Z,1520544313.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:14.205Z,1520544314.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:14.599Z,1520544314.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:15.010Z,1520544315.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:15.407Z,1520544315.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:15.801Z,1520544315.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:16.219Z,1520544316.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:16.612Z,1520544316.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:17.013Z,1520544317.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:17.406Z,1520544317.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:17.806Z,1520544317.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:18.210Z,1520544318.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:18.607Z,1520544318.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:19.003Z,1520544319.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:19.412Z,1520544319.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:19.815Z,1520544319.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:20.216Z,1520544320.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:20.602Z,1520544320.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:21.003Z,1520544321.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:21.410Z,1520544321.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:21.803Z,1520544321.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:22.238Z,1520544322.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:22.615Z,1520544322.615 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:22.615Z,1520544322.615 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 273
2018-03-08T21:25:22.616Z,1520544322.616 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T21:25:22.617Z,1520544322.617 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:22.617Z,1520544322.617 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 273
2018-03-08T21:25:22.618Z,1520544322.618 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T21:25:22.619Z,1520544322.619 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:22.619Z,1520544322.619 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 273
2018-03-08T21:25:22.619Z,1520544322.619 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T21:25:22.652Z,1520544322.652 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T21:25:22.652Z,1520544322.652 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T21:25:22.653Z,1520544322.653 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T21:25:23.037Z,1520544323.037 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T21:25:23.037Z,1520544323.037 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 273
2018-03-08T21:25:23.038Z,1520544323.038 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T21:25:23.038Z,1520544323.038 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 273
2018-03-08T21:25:23.038Z,1520544323.038 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T21:25:23.039Z,1520544323.039 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 273
2018-03-08T21:25:23.408Z,1520544323.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T21:25:23.409Z,1520544323.409 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:25:23.409Z,1520544323.409 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:25:23.410Z,1520544323.410 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T21:25:23.410Z,1520544323.410 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:25:23.410Z,1520544323.410 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:25:23.411Z,1520544323.411 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T21:25:23.411Z,1520544323.411 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:25:23.411Z,1520544323.411 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:25:23.813Z,1520544323.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T21:25:23.814Z,1520544323.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:24.209Z,1520544324.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T21:25:24.209Z,1520544324.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:24.608Z,1520544324.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T21:25:24.609Z,1520544324.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:25.010Z,1520544325.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T21:25:25.011Z,1520544325.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:25.412Z,1520544325.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T21:25:25.414Z,1520544325.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:25.816Z,1520544325.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T21:25:25.817Z,1520544325.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:26.213Z,1520544326.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T21:25:26.214Z,1520544326.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:26.587Z,1520544326.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T21:25:26.588Z,1520544326.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:27.013Z,1520544327.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T21:25:27.013Z,1520544327.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:27.416Z,1520544327.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T21:25:27.417Z,1520544327.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:27.786Z,1520544327.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T21:25:27.787Z,1520544327.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:28.220Z,1520544328.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T21:25:28.221Z,1520544328.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:28.617Z,1520544328.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T21:25:28.618Z,1520544328.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:29.022Z,1520544329.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T21:25:29.023Z,1520544329.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:29.414Z,1520544329.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T21:25:29.415Z,1520544329.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:29.796Z,1520544329.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T21:25:29.797Z,1520544329.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:30.218Z,1520544330.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T21:25:30.219Z,1520544330.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:30.601Z,1520544330.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T21:25:30.602Z,1520544330.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:31.001Z,1520544331.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T21:25:31.002Z,1520544331.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:31.400Z,1520544331.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T21:25:31.401Z,1520544331.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:31.824Z,1520544331.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T21:25:31.825Z,1520544331.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:32.227Z,1520544332.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T21:25:32.228Z,1520544332.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:32.598Z,1520544332.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T21:25:32.599Z,1520544332.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:33.006Z,1520544333.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T21:25:33.007Z,1520544333.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:33.399Z,1520544333.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T21:25:33.400Z,1520544333.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:33.796Z,1520544333.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T21:25:33.797Z,1520544333.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:34.230Z,1520544334.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T21:25:34.231Z,1520544334.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:34.630Z,1520544334.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T21:25:34.630Z,1520544334.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:35.029Z,1520544335.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T21:25:35.030Z,1520544335.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:35.411Z,1520544335.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T21:25:35.411Z,1520544335.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:35.806Z,1520544335.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T21:25:35.807Z,1520544335.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:36.210Z,1520544336.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T21:25:36.211Z,1520544336.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:36.604Z,1520544336.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T21:25:36.605Z,1520544336.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:37.010Z,1520544337.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T21:25:37.011Z,1520544337.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:37.411Z,1520544337.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T21:25:37.411Z,1520544337.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:37.811Z,1520544337.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T21:25:37.812Z,1520544337.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:38.212Z,1520544338.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T21:25:38.213Z,1520544338.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:38.595Z,1520544338.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T21:25:38.596Z,1520544338.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:39.002Z,1520544339.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T21:25:39.003Z,1520544339.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:39.408Z,1520544339.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T21:25:39.409Z,1520544339.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:39.803Z,1520544339.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T21:25:39.804Z,1520544339.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:40.236Z,1520544340.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T21:25:40.237Z,1520544340.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:40.616Z,1520544340.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T21:25:40.617Z,1520544340.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:41.008Z,1520544341.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T21:25:41.009Z,1520544341.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:41.410Z,1520544341.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T21:25:41.411Z,1520544341.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:41.843Z,1520544341.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T21:25:41.844Z,1520544341.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:42.244Z,1520544342.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T21:25:42.245Z,1520544342.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:42.615Z,1520544342.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T21:25:42.616Z,1520544342.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:43.015Z,1520544343.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:43.423Z,1520544343.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:43.857Z,1520544343.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:44.221Z,1520544344.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:44.610Z,1520544344.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:45.027Z,1520544345.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:45.419Z,1520544345.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:45.826Z,1520544345.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:46.236Z,1520544346.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:46.635Z,1520544346.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:47.016Z,1520544347.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:47.403Z,1520544347.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:47.814Z,1520544347.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:48.206Z,1520544348.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:48.605Z,1520544348.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:49.003Z,1520544349.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:49.412Z,1520544349.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:49.812Z,1520544349.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:50.218Z,1520544350.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:50.602Z,1520544350.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:51.008Z,1520544351.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:51.399Z,1520544351.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:51.965Z,1520544351.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:52.214Z,1520544352.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:52.613Z,1520544352.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:53.005Z,1520544353.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:53.396Z,1520544353.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:53.861Z,1520544353.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:54.203Z,1520544354.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:54.595Z,1520544354.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:54.998Z,1520544354.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:55.408Z,1520544355.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:55.819Z,1520544355.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:56.227Z,1520544356.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:56.603Z,1520544356.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:57.005Z,1520544357.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:57.399Z,1520544357.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:57.402Z,1520544357.402 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T21:25:57.402Z,1520544357.402 [Default:CheckIn:C.Wait] Stopped
2018-03-08T21:25:57.402Z,1520544357.402 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T21:25:57.402Z,1520544357.402 [Default:CheckIn:D] Running Loop=1
2018-03-08T21:25:57.800Z,1520544357.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:57.803Z,1520544357.803 [Default:CheckIn:D] Stopped
2018-03-08T21:25:57.803Z,1520544357.803 [Default:CheckIn:E] Running Loop=1
2018-03-08T21:25:58.213Z,1520544358.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:25:58.217Z,1520544358.217 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 820.216602 min 
2018-03-08T21:25:58.218Z,1520544358.218 [Default:CheckIn:E] Stopped
2018-03-08T21:25:58.218Z,1520544358.218 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T21:25:58.218Z,1520544358.218 [Default:CheckIn] Stopped
2018-03-08T21:25:58.218Z,1520544358.218 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T21:25:58.218Z,1520544358.218 [Default:CheckIn](INFO): Running loop #80
2018-03-08T21:25:58.218Z,1520544358.218 [Default:CheckIn] Running Loop=80
2018-03-08T21:25:58.218Z,1520544358.218 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T21:25:58.218Z,1520544358.218 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T21:26:01.397Z,1520544361.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:01.513Z,1520544361.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:01.902Z,1520544361.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:02.262Z,1520544362.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:02.667Z,1520544362.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:03.070Z,1520544363.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:03.472Z,1520544363.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:03.876Z,1520544363.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:04.274Z,1520544364.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:04.666Z,1520544364.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:05.064Z,1520544365.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:05.474Z,1520544365.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:05.869Z,1520544365.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:06.273Z,1520544366.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:06.673Z,1520544366.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:07.073Z,1520544367.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:07.469Z,1520544367.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:07.865Z,1520544367.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:08.269Z,1520544368.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:08.663Z,1520544368.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:09.066Z,1520544369.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:09.472Z,1520544369.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:09.877Z,1520544369.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:10.278Z,1520544370.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:10.669Z,1520544370.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:11.064Z,1520544371.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:11.467Z,1520544371.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:11.870Z,1520544371.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:12.279Z,1520544372.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:12.676Z,1520544372.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:13.075Z,1520544373.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:13.474Z,1520544373.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:13.874Z,1520544373.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:14.274Z,1520544374.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:14.670Z,1520544374.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:15.074Z,1520544375.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:15.475Z,1520544375.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:15.878Z,1520544375.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:16.282Z,1520544376.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:16.671Z,1520544376.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:17.071Z,1520544377.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:17.468Z,1520544377.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:17.866Z,1520544377.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:18.279Z,1520544378.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:18.677Z,1520544378.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:19.071Z,1520544379.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:19.466Z,1520544379.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:19.874Z,1520544379.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:20.274Z,1520544380.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:20.667Z,1520544380.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:21.079Z,1520544381.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:21.473Z,1520544381.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:21.880Z,1520544381.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:22.280Z,1520544382.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:22.671Z,1520544382.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:23.078Z,1520544383.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:23.477Z,1520544383.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:23.867Z,1520544383.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:24.289Z,1520544384.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:24.683Z,1520544384.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:25.078Z,1520544385.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:25.479Z,1520544385.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:25.875Z,1520544385.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:26.278Z,1520544386.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:26.671Z,1520544386.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:27.076Z,1520544387.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:27.486Z,1520544387.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:27.880Z,1520544387.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:28.277Z,1520544388.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:28.669Z,1520544388.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:29.074Z,1520544389.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:29.473Z,1520544389.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:29.873Z,1520544389.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:30.281Z,1520544390.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:30.688Z,1520544390.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:31.080Z,1520544391.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:31.467Z,1520544391.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:31.866Z,1520544391.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:32.268Z,1520544392.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:32.671Z,1520544392.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:33.078Z,1520544393.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:33.480Z,1520544393.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:33.885Z,1520544393.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:34.276Z,1520544394.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:34.675Z,1520544394.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:35.071Z,1520544395.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:35.479Z,1520544395.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:35.881Z,1520544395.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:36.280Z,1520544396.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:36.683Z,1520544396.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:37.086Z,1520544397.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:37.456Z,1520544397.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:37.881Z,1520544397.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:38.258Z,1520544398.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:38.656Z,1520544398.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:39.089Z,1520544399.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:39.488Z,1520544399.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:39.890Z,1520544399.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:40.289Z,1520544400.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:40.665Z,1520544400.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:41.062Z,1520544401.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:41.470Z,1520544401.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:41.862Z,1520544401.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:42.294Z,1520544402.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:42.695Z,1520544402.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:43.072Z,1520544403.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:43.465Z,1520544403.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:43.870Z,1520544403.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:44.269Z,1520544404.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:44.662Z,1520544404.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:45.065Z,1520544405.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:45.479Z,1520544405.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:45.871Z,1520544405.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:46.278Z,1520544406.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:46.669Z,1520544406.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:47.069Z,1520544407.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:47.466Z,1520544407.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:47.869Z,1520544407.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:48.272Z,1520544408.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:48.676Z,1520544408.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:49.075Z,1520544409.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:49.502Z,1520544409.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:49.898Z,1520544409.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:50.274Z,1520544410.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:50.665Z,1520544410.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:51.078Z,1520544411.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:51.474Z,1520544411.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:51.893Z,1520544411.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:52.270Z,1520544412.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:52.666Z,1520544412.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:53.070Z,1520544413.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:53.478Z,1520544413.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:53.877Z,1520544413.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:54.304Z,1520544414.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:54.711Z,1520544414.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:55.082Z,1520544415.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:55.476Z,1520544415.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:55.872Z,1520544415.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:56.284Z,1520544416.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:56.681Z,1520544416.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:57.085Z,1520544417.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:57.481Z,1520544417.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:57.878Z,1520544417.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:26:58.277Z,1520544418.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:01.375Z,1520544421.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:01.519Z,1520544421.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:01.874Z,1520544421.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:02.274Z,1520544422.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:02.648Z,1520544422.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:03.046Z,1520544423.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:03.446Z,1520544423.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:03.840Z,1520544423.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:04.274Z,1520544424.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:04.655Z,1520544424.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:05.056Z,1520544425.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:05.446Z,1520544425.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:05.845Z,1520544425.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:06.246Z,1520544426.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:06.650Z,1520544426.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:07.045Z,1520544427.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:07.451Z,1520544427.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:07.860Z,1520544427.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:08.258Z,1520544428.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:08.642Z,1520544428.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:09.051Z,1520544429.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:09.450Z,1520544429.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:09.844Z,1520544429.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:10.251Z,1520544430.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:10.281Z,1520544430.281 [CBIT](INFO): Clearing failed state for component DropWeight
2018-03-08T21:27:10.281Z,1520544430.281 [DropWeight] No Fault, FailCount= 1
2018-03-08T21:27:10.650Z,1520544430.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:11.052Z,1520544431.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:11.450Z,1520544431.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:11.847Z,1520544431.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:12.251Z,1520544432.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:12.651Z,1520544432.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:13.050Z,1520544433.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:13.452Z,1520544433.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:13.853Z,1520544433.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:14.252Z,1520544434.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:14.643Z,1520544434.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:15.046Z,1520544435.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:15.444Z,1520544435.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:15.843Z,1520544435.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:16.262Z,1520544436.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:16.656Z,1520544436.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:17.056Z,1520544437.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:17.451Z,1520544437.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:17.851Z,1520544437.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:18.251Z,1520544438.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:18.651Z,1520544438.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:19.051Z,1520544439.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:19.452Z,1520544439.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:19.855Z,1520544439.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:20.256Z,1520544440.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:20.646Z,1520544440.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:21.047Z,1520544441.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:21.450Z,1520544441.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:21.845Z,1520544441.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:22.263Z,1520544442.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:22.659Z,1520544442.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:23.060Z,1520544443.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:23.450Z,1520544443.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:23.851Z,1520544443.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:24.255Z,1520544444.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:24.650Z,1520544444.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:25.050Z,1520544445.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:25.456Z,1520544445.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:25.859Z,1520544445.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:26.266Z,1520544446.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:26.644Z,1520544446.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:27.047Z,1520544447.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:27.446Z,1520544447.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:27.847Z,1520544447.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:28.259Z,1520544448.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:28.659Z,1520544448.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:29.066Z,1520544449.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:29.454Z,1520544449.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:29.849Z,1520544449.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:30.245Z,1520544450.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:30.651Z,1520544450.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:31.048Z,1520544451.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:31.456Z,1520544451.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:31.866Z,1520544451.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:32.270Z,1520544452.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:32.644Z,1520544452.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:33.047Z,1520544453.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:33.450Z,1520544453.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:33.853Z,1520544453.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:34.256Z,1520544454.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:34.661Z,1520544454.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:35.060Z,1520544455.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:35.458Z,1520544455.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:35.849Z,1520544455.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:36.248Z,1520544456.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:36.653Z,1520544456.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:37.054Z,1520544457.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:37.459Z,1520544457.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:37.865Z,1520544457.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:38.265Z,1520544458.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:38.640Z,1520544458.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:39.051Z,1520544459.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:39.459Z,1520544459.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:39.835Z,1520544459.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:40.266Z,1520544460.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:40.667Z,1520544460.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:41.059Z,1520544461.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:41.478Z,1520544461.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:41.866Z,1520544461.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:42.265Z,1520544462.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:42.682Z,1520544462.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:43.073Z,1520544463.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:43.479Z,1520544463.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:43.869Z,1520544463.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:44.277Z,1520544464.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:44.651Z,1520544464.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:45.050Z,1520544465.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:45.484Z,1520544465.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:45.855Z,1520544465.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:46.257Z,1520544466.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:46.661Z,1520544466.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:47.060Z,1520544467.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:47.455Z,1520544467.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:47.849Z,1520544467.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:48.249Z,1520544468.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:48.658Z,1520544468.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:49.052Z,1520544469.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:49.457Z,1520544469.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:49.871Z,1520544469.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:50.261Z,1520544470.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:50.653Z,1520544470.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:51.059Z,1520544471.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:51.455Z,1520544471.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:51.851Z,1520544471.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:52.258Z,1520544472.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:52.658Z,1520544472.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:53.055Z,1520544473.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:53.458Z,1520544473.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:53.853Z,1520544473.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:54.251Z,1520544474.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:54.654Z,1520544474.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:55.050Z,1520544475.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:55.455Z,1520544475.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:55.871Z,1520544475.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:56.261Z,1520544476.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:56.648Z,1520544476.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:57.048Z,1520544477.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:57.457Z,1520544477.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:57.850Z,1520544477.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:58.258Z,1520544478.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:27:58.657Z,1520544478.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:01.758Z,1520544481.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:01.907Z,1520544481.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:02.241Z,1520544482.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:02.627Z,1520544482.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:03.047Z,1520544483.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:03.454Z,1520544483.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:03.847Z,1520544483.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:04.250Z,1520544484.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:04.645Z,1520544484.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:05.021Z,1520544485.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:05.446Z,1520544485.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:05.826Z,1520544485.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:06.251Z,1520544486.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:06.650Z,1520544486.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:07.054Z,1520544487.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:07.426Z,1520544487.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:07.826Z,1520544487.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:08.251Z,1520544488.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:08.631Z,1520544488.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:09.027Z,1520544489.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:09.451Z,1520544489.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:09.851Z,1520544489.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:10.255Z,1520544490.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:10.628Z,1520544490.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:11.040Z,1520544491.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:11.427Z,1520544491.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:11.831Z,1520544491.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:12.261Z,1520544492.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:12.632Z,1520544492.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:13.087Z,1520544493.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:13.431Z,1520544493.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:13.827Z,1520544493.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:14.231Z,1520544494.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:14.628Z,1520544494.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:15.028Z,1520544495.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:15.458Z,1520544495.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:15.860Z,1520544495.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:16.236Z,1520544496.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:16.631Z,1520544496.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:17.031Z,1520544497.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:17.431Z,1520544497.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:17.837Z,1520544497.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:18.240Z,1520544498.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:18.640Z,1520544498.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:19.036Z,1520544499.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:19.438Z,1520544499.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:19.833Z,1520544499.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:20.238Z,1520544500.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:20.635Z,1520544500.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:21.033Z,1520544501.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:21.442Z,1520544501.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:21.864Z,1520544501.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:22.232Z,1520544502.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:22.631Z,1520544502.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:23.031Z,1520544503.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:23.429Z,1520544503.429 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:23.429Z,1520544503.429 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 274
2018-03-08T21:28:23.429Z,1520544503.429 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T21:28:23.431Z,1520544503.431 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:23.431Z,1520544503.431 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 274
2018-03-08T21:28:23.431Z,1520544503.431 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T21:28:23.433Z,1520544503.433 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:23.433Z,1520544503.433 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 274
2018-03-08T21:28:23.433Z,1520544503.433 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T21:28:23.453Z,1520544503.453 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T21:28:23.453Z,1520544503.453 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T21:28:23.453Z,1520544503.453 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T21:28:23.841Z,1520544503.841 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T21:28:23.841Z,1520544503.841 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 274
2018-03-08T21:28:23.842Z,1520544503.842 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T21:28:23.842Z,1520544503.842 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 274
2018-03-08T21:28:23.842Z,1520544503.842 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T21:28:23.843Z,1520544503.843 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 274
2018-03-08T21:28:24.243Z,1520544504.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T21:28:24.244Z,1520544504.244 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:28:24.244Z,1520544504.244 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:28:24.245Z,1520544504.245 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T21:28:24.245Z,1520544504.245 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:28:24.245Z,1520544504.245 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:28:24.246Z,1520544504.246 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T21:28:24.246Z,1520544504.246 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:28:24.246Z,1520544504.246 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:28:24.644Z,1520544504.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T21:28:24.645Z,1520544504.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:25.043Z,1520544505.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T21:28:25.045Z,1520544505.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:25.434Z,1520544505.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T21:28:25.435Z,1520544505.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:25.844Z,1520544505.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T21:28:25.845Z,1520544505.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:26.242Z,1520544506.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T21:28:26.243Z,1520544506.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:26.637Z,1520544506.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T21:28:26.638Z,1520544506.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:27.038Z,1520544507.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T21:28:27.039Z,1520544507.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:27.450Z,1520544507.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T21:28:27.451Z,1520544507.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:27.850Z,1520544507.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T21:28:27.851Z,1520544507.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:28.254Z,1520544508.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T21:28:28.255Z,1520544508.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:28.633Z,1520544508.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T21:28:28.634Z,1520544508.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:29.038Z,1520544509.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T21:28:29.039Z,1520544509.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:29.437Z,1520544509.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T21:28:29.438Z,1520544509.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:29.838Z,1520544509.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T21:28:29.839Z,1520544509.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:30.245Z,1520544510.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T21:28:30.246Z,1520544510.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:30.643Z,1520544510.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T21:28:30.644Z,1520544510.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:31.042Z,1520544511.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T21:28:31.043Z,1520544511.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:31.441Z,1520544511.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T21:28:31.442Z,1520544511.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:31.838Z,1520544511.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T21:28:31.839Z,1520544511.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:32.237Z,1520544512.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T21:28:32.238Z,1520544512.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:32.654Z,1520544512.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T21:28:32.654Z,1520544512.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:33.037Z,1520544513.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T21:28:33.038Z,1520544513.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:33.450Z,1520544513.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T21:28:33.451Z,1520544513.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:33.841Z,1520544513.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T21:28:33.842Z,1520544513.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:34.243Z,1520544514.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T21:28:34.244Z,1520544514.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:34.638Z,1520544514.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T21:28:34.639Z,1520544514.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:35.038Z,1520544515.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T21:28:35.039Z,1520544515.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:35.438Z,1520544515.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T21:28:35.439Z,1520544515.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:35.837Z,1520544515.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T21:28:35.838Z,1520544515.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:36.246Z,1520544516.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T21:28:36.247Z,1520544516.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:36.645Z,1520544516.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T21:28:36.646Z,1520544516.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:37.044Z,1520544517.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T21:28:37.049Z,1520544517.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:37.422Z,1520544517.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T21:28:37.423Z,1520544517.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:37.826Z,1520544517.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T21:28:37.826Z,1520544517.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:38.250Z,1520544518.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T21:28:38.251Z,1520544518.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:38.629Z,1520544518.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T21:28:38.630Z,1520544518.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:39.038Z,1520544519.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T21:28:39.039Z,1520544519.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:39.458Z,1520544519.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T21:28:39.459Z,1520544519.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:39.838Z,1520544519.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T21:28:39.839Z,1520544519.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:40.240Z,1520544520.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T21:28:40.261Z,1520544520.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:40.629Z,1520544520.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T21:28:40.630Z,1520544520.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:41.026Z,1520544521.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T21:28:41.027Z,1520544521.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:41.438Z,1520544521.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T21:28:41.439Z,1520544521.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:41.830Z,1520544521.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T21:28:41.831Z,1520544521.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:42.242Z,1520544522.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T21:28:42.243Z,1520544522.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:42.643Z,1520544522.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T21:28:42.661Z,1520544522.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:43.037Z,1520544523.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T21:28:43.038Z,1520544523.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:43.426Z,1520544523.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T21:28:43.427Z,1520544523.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:43.834Z,1520544523.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:44.234Z,1520544524.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:44.627Z,1520544524.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:45.035Z,1520544525.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:45.436Z,1520544525.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:45.842Z,1520544525.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:46.236Z,1520544526.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:46.634Z,1520544526.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:47.026Z,1520544527.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:47.438Z,1520544527.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:47.834Z,1520544527.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:48.236Z,1520544528.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:48.640Z,1520544528.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:49.036Z,1520544529.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:49.433Z,1520544529.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:49.834Z,1520544529.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:50.235Z,1520544530.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:50.636Z,1520544530.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:51.034Z,1520544531.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:51.442Z,1520544531.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:51.867Z,1520544531.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:52.236Z,1520544532.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:52.638Z,1520544532.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:53.038Z,1520544533.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:53.436Z,1520544533.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:53.841Z,1520544533.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:54.244Z,1520544534.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:54.650Z,1520544534.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:55.055Z,1520544535.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:55.437Z,1520544535.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:55.842Z,1520544535.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:56.225Z,1520544536.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:56.622Z,1520544536.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:57.030Z,1520544537.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:57.454Z,1520544537.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:57.857Z,1520544537.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:58.236Z,1520544538.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:58.627Z,1520544538.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:28:59.030Z,1520544539.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:02.126Z,1520544542.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:02.266Z,1520544542.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:02.578Z,1520544542.578 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T21:29:02.578Z,1520544542.578 [NAL9602] Data Fault, FailCount= 1
2018-03-08T21:29:02.578Z,1520544542.578 [NAL9602](ERROR): Data Fault
2018-03-08T21:29:02.635Z,1520544542.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:02.660Z,1520544542.660 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T21:29:02.978Z,1520544542.978 [NAL9602](INFO): Powering down
2018-03-08T21:29:03.035Z,1520544543.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:03.422Z,1520544543.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:03.831Z,1520544543.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:03.843Z,1520544543.843 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T21:29:03.844Z,1520544543.844 [NAL9602] No Fault, FailCount= 1
2018-03-08T21:29:04.230Z,1520544544.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:04.605Z,1520544544.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:05.009Z,1520544545.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:05.405Z,1520544545.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:05.806Z,1520544545.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:06.210Z,1520544546.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:06.604Z,1520544546.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:07.033Z,1520544547.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:07.430Z,1520544547.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:07.811Z,1520544547.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:08.217Z,1520544548.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:08.616Z,1520544548.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:09.012Z,1520544549.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:09.410Z,1520544549.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:09.816Z,1520544549.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:10.210Z,1520544550.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:10.623Z,1520544550.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:11.014Z,1520544551.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:11.406Z,1520544551.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:11.813Z,1520544551.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:12.218Z,1520544552.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:12.608Z,1520544552.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:13.010Z,1520544553.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:13.414Z,1520544553.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:13.811Z,1520544553.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:14.215Z,1520544554.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:14.615Z,1520544554.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:15.014Z,1520544555.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:15.415Z,1520544555.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:15.814Z,1520544555.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:16.214Z,1520544556.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:16.615Z,1520544556.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:17.013Z,1520544557.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:17.412Z,1520544557.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:17.814Z,1520544557.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:18.214Z,1520544558.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:18.611Z,1520544558.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:19.015Z,1520544559.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:19.423Z,1520544559.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:19.807Z,1520544559.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:20.215Z,1520544560.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:20.612Z,1520544560.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:21.014Z,1520544561.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:21.416Z,1520544561.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:21.814Z,1520544561.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:22.228Z,1520544562.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:22.612Z,1520544562.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:23.012Z,1520544563.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:23.407Z,1520544563.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:23.815Z,1520544563.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:24.215Z,1520544564.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:24.611Z,1520544564.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:25.014Z,1520544565.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:25.418Z,1520544565.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:25.811Z,1520544565.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:26.216Z,1520544566.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:26.614Z,1520544566.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:27.014Z,1520544567.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:27.415Z,1520544567.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:27.814Z,1520544567.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:28.209Z,1520544568.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:28.615Z,1520544568.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:29.015Z,1520544569.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:29.411Z,1520544569.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:29.822Z,1520544569.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:30.214Z,1520544570.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:30.611Z,1520544570.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:31.016Z,1520544571.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:31.415Z,1520544571.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:31.811Z,1520544571.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:32.222Z,1520544572.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:32.615Z,1520544572.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:32.983Z,1520544572.983 [NAL9602](INFO): Powering up NAL9602
2018-03-08T21:29:33.016Z,1520544573.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:33.415Z,1520544573.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:33.822Z,1520544573.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:34.214Z,1520544574.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:34.615Z,1520544574.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:35.015Z,1520544575.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:35.407Z,1520544575.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:35.816Z,1520544575.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:36.215Z,1520544576.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:36.614Z,1520544576.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:37.019Z,1520544577.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:37.422Z,1520544577.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:37.821Z,1520544577.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:38.222Z,1520544578.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:38.622Z,1520544578.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:39.016Z,1520544579.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:39.417Z,1520544579.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:39.822Z,1520544579.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:40.217Z,1520544580.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:40.619Z,1520544580.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:41.027Z,1520544581.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:41.419Z,1520544581.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:41.822Z,1520544581.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:42.216Z,1520544582.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:42.653Z,1520544582.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:43.016Z,1520544583.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:43.429Z,1520544583.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:43.862Z,1520544583.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:44.174Z,1520544584.174 [NAL9602](INFO): NAL9602 initialized
2018-03-08T21:29:44.243Z,1520544584.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:44.631Z,1520544584.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:45.033Z,1520544585.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:45.434Z,1520544585.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:45.828Z,1520544585.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:46.246Z,1520544586.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:46.622Z,1520544586.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:47.012Z,1520544587.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:47.414Z,1520544587.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:47.813Z,1520544587.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:48.236Z,1520544588.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:48.643Z,1520544588.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:49.015Z,1520544589.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:49.412Z,1520544589.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:49.816Z,1520544589.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:50.238Z,1520544590.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:50.635Z,1520544590.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:51.025Z,1520544591.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:51.410Z,1520544591.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:51.828Z,1520544591.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:52.224Z,1520544592.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:52.626Z,1520544592.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:53.019Z,1520544593.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:53.417Z,1520544593.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:53.828Z,1520544593.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:54.230Z,1520544594.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:54.623Z,1520544594.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:55.014Z,1520544595.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:55.419Z,1520544595.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:55.824Z,1520544595.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:56.231Z,1520544596.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:56.630Z,1520544596.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:57.020Z,1520544597.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:57.417Z,1520544597.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:57.831Z,1520544597.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:58.230Z,1520544598.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:58.620Z,1520544598.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:59.029Z,1520544599.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:29:59.418Z,1520544599.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:02.530Z,1520544602.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:02.686Z,1520544602.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:03.032Z,1520544603.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:03.417Z,1520544603.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:03.830Z,1520544603.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:04.227Z,1520544604.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:04.619Z,1520544604.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:05.034Z,1520544605.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:05.431Z,1520544605.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:05.828Z,1520544605.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:06.222Z,1520544606.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:06.629Z,1520544606.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:07.027Z,1520544607.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:07.430Z,1520544607.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:07.831Z,1520544607.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:08.234Z,1520544608.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:08.638Z,1520544608.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:09.027Z,1520544609.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:09.425Z,1520544609.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:09.831Z,1520544609.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:10.232Z,1520544610.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:10.628Z,1520544610.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:11.038Z,1520544611.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:11.426Z,1520544611.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:11.827Z,1520544611.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:12.243Z,1520544612.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:12.641Z,1520544612.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:13.024Z,1520544613.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:13.424Z,1520544613.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:13.924Z,1520544613.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:14.241Z,1520544614.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:14.632Z,1520544614.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:15.033Z,1520544615.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:15.430Z,1520544615.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:15.833Z,1520544615.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:16.236Z,1520544616.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:16.631Z,1520544616.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:17.024Z,1520544617.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:17.432Z,1520544617.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:17.838Z,1520544617.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:18.237Z,1520544618.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:18.647Z,1520544618.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:19.034Z,1520544619.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:19.427Z,1520544619.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:19.836Z,1520544619.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:20.239Z,1520544620.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:20.636Z,1520544620.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:21.026Z,1520544621.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:21.430Z,1520544621.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:21.837Z,1520544621.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:22.236Z,1520544622.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:22.638Z,1520544622.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:23.031Z,1520544623.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:23.426Z,1520544623.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:23.845Z,1520544623.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:24.272Z,1520544624.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:24.633Z,1520544624.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:25.033Z,1520544625.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:25.425Z,1520544625.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:25.839Z,1520544625.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:26.241Z,1520544626.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:26.638Z,1520544626.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:27.026Z,1520544627.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:27.431Z,1520544627.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:27.843Z,1520544627.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:28.241Z,1520544628.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:28.638Z,1520544628.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:29.031Z,1520544629.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:29.428Z,1520544629.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:29.839Z,1520544629.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:30.240Z,1520544630.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:30.636Z,1520544630.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:31.029Z,1520544631.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:31.427Z,1520544631.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:31.838Z,1520544631.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:32.239Z,1520544632.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:32.641Z,1520544632.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:33.037Z,1520544633.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:33.430Z,1520544633.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:33.842Z,1520544633.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:34.239Z,1520544634.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:34.636Z,1520544634.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:35.014Z,1520544635.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:35.418Z,1520544635.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:35.840Z,1520544635.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:36.240Z,1520544636.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:36.645Z,1520544636.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:37.018Z,1520544637.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:37.422Z,1520544637.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:37.828Z,1520544637.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:38.245Z,1520544638.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:38.648Z,1520544638.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:39.019Z,1520544639.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:39.415Z,1520544639.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:39.848Z,1520544639.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:40.253Z,1520544640.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:40.651Z,1520544640.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:41.066Z,1520544641.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:41.466Z,1520544641.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:41.833Z,1520544641.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:42.239Z,1520544642.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:42.654Z,1520544642.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:43.029Z,1520544643.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:43.423Z,1520544643.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:43.838Z,1520544643.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:44.234Z,1520544644.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:44.632Z,1520544644.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:45.038Z,1520544645.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:45.429Z,1520544645.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:45.836Z,1520544645.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:46.247Z,1520544646.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:46.628Z,1520544646.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:47.034Z,1520544647.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:47.429Z,1520544647.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:47.830Z,1520544647.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:48.236Z,1520544648.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:48.643Z,1520544648.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:49.029Z,1520544649.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:49.423Z,1520544649.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:49.843Z,1520544649.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:50.247Z,1520544650.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:50.632Z,1520544650.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:51.026Z,1520544651.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:51.430Z,1520544651.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:51.842Z,1520544651.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:52.241Z,1520544652.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:52.635Z,1520544652.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:53.028Z,1520544653.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:53.426Z,1520544653.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:53.842Z,1520544653.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:54.236Z,1520544654.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:54.641Z,1520544654.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:55.033Z,1520544655.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:55.433Z,1520544655.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:55.841Z,1520544655.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:56.239Z,1520544656.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:56.637Z,1520544656.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:57.030Z,1520544657.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:57.434Z,1520544657.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:57.832Z,1520544657.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:58.237Z,1520544658.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:58.240Z,1520544658.240 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T21:25:58.2Z
2018-03-08T21:30:58.240Z,1520544658.240 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T21:30:58.240Z,1520544658.240 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T21:30:58.629Z,1520544658.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:59.131Z,1520544659.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:30:59.439Z,1520544659.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:02.746Z,1520544662.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:02.883Z,1520544662.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:03.176Z,1520544663.176 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0320.lzma
2018-03-08T21:31:03.238Z,1520544663.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:03.633Z,1520544663.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:03.975Z,1520544663.975 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0320.lzma.bak
2018-03-08T21:31:03.975Z,1520544663.975 [DataOverHttps](INFO): SBD MOMSN=7989288
2018-03-08T21:31:04.012Z,1520544664.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:04.601Z,1520544664.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:04.831Z,1520544664.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:07.939Z,1520544667.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:08.078Z,1520544668.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:08.435Z,1520544668.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:08.809Z,1520544668.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:09.208Z,1520544669.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:09.609Z,1520544669.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:10.040Z,1520544670.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:13.141Z,1520544673.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:13.266Z,1520544673.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:13.576Z,1520544673.576 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0321.lzma
2018-03-08T21:31:13.612Z,1520544673.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:14.011Z,1520544674.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:14.368Z,1520544674.368 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0321.lzma.bak
2018-03-08T21:31:14.368Z,1520544674.368 [DataOverHttps](INFO): SBD MOMSN=7989290
2018-03-08T21:31:14.438Z,1520544674.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:15.006Z,1520544675.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:15.009Z,1520544675.009 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T21:31:15.009Z,1520544675.009 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T21:31:15.009Z,1520544675.009 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T21:31:15.224Z,1520544675.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:18.350Z,1520544678.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:18.486Z,1520544678.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:18.820Z,1520544678.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:19.216Z,1520544679.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:19.616Z,1520544679.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:20.046Z,1520544680.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:20.423Z,1520544680.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:20.825Z,1520544680.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:21.230Z,1520544681.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:21.623Z,1520544681.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:22.021Z,1520544682.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:22.422Z,1520544682.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:22.824Z,1520544682.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:23.224Z,1520544683.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:23.629Z,1520544683.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:24.023Z,1520544684.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:24.419Z,1520544684.419 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:24.420Z,1520544684.420 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 275
2018-03-08T21:31:24.420Z,1520544684.420 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T21:31:24.422Z,1520544684.422 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:24.423Z,1520544684.423 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 275
2018-03-08T21:31:24.423Z,1520544684.423 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T21:31:24.424Z,1520544684.424 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:24.425Z,1520544684.425 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 275
2018-03-08T21:31:24.425Z,1520544684.425 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T21:31:24.457Z,1520544684.457 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T21:31:24.457Z,1520544684.457 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T21:31:24.457Z,1520544684.457 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T21:31:24.861Z,1520544684.861 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T21:31:24.861Z,1520544684.861 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 275
2018-03-08T21:31:24.861Z,1520544684.861 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T21:31:24.862Z,1520544684.862 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 275
2018-03-08T21:31:24.862Z,1520544684.862 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T21:31:24.862Z,1520544684.862 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 275
2018-03-08T21:31:25.230Z,1520544685.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T21:31:25.230Z,1520544685.230 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:31:25.231Z,1520544685.231 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:31:25.231Z,1520544685.231 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T21:31:25.231Z,1520544685.231 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:31:25.232Z,1520544685.232 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:31:25.232Z,1520544685.232 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T21:31:25.233Z,1520544685.233 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:31:25.233Z,1520544685.233 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:31:25.637Z,1520544685.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T21:31:25.638Z,1520544685.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:26.024Z,1520544686.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T21:31:26.025Z,1520544686.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:26.427Z,1520544686.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T21:31:26.428Z,1520544686.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:26.827Z,1520544686.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T21:31:26.828Z,1520544686.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:27.232Z,1520544687.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T21:31:27.233Z,1520544687.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:27.627Z,1520544687.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T21:31:27.627Z,1520544687.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:28.023Z,1520544688.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T21:31:28.025Z,1520544688.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:28.419Z,1520544688.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T21:31:28.420Z,1520544688.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:28.834Z,1520544688.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T21:31:28.835Z,1520544688.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:29.229Z,1520544689.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T21:31:29.230Z,1520544689.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:29.627Z,1520544689.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T21:31:29.629Z,1520544689.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:30.026Z,1520544690.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T21:31:30.027Z,1520544690.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:30.426Z,1520544690.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T21:31:30.427Z,1520544690.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:30.828Z,1520544690.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T21:31:30.829Z,1520544690.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:31.232Z,1520544691.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T21:31:31.233Z,1520544691.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:31.628Z,1520544691.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T21:31:31.629Z,1520544691.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:32.019Z,1520544692.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T21:31:32.020Z,1520544692.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:32.420Z,1520544692.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T21:31:32.421Z,1520544692.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:32.895Z,1520544692.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-08T21:31:32.897Z,1520544692.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:33.242Z,1520544693.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T21:31:33.243Z,1520544693.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:33.631Z,1520544693.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T21:31:33.632Z,1520544693.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:34.019Z,1520544694.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T21:31:34.020Z,1520544694.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:34.434Z,1520544694.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T21:31:34.435Z,1520544694.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:34.832Z,1520544694.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T21:31:34.833Z,1520544694.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:35.228Z,1520544695.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T21:31:35.229Z,1520544695.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:35.632Z,1520544695.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T21:31:35.633Z,1520544695.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:36.022Z,1520544696.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T21:31:36.023Z,1520544696.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:36.421Z,1520544696.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T21:31:36.422Z,1520544696.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:36.828Z,1520544696.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T21:31:36.829Z,1520544696.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:37.227Z,1520544697.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T21:31:37.228Z,1520544697.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:37.624Z,1520544697.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T21:31:37.625Z,1520544697.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:38.023Z,1520544698.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T21:31:38.024Z,1520544698.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:38.424Z,1520544698.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T21:31:38.425Z,1520544698.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:38.830Z,1520544698.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T21:31:38.831Z,1520544698.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:39.233Z,1520544699.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T21:31:39.234Z,1520544699.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:39.631Z,1520544699.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T21:31:39.631Z,1520544699.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:40.024Z,1520544700.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T21:31:40.025Z,1520544700.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:40.424Z,1520544700.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T21:31:40.425Z,1520544700.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:40.835Z,1520544700.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T21:31:40.836Z,1520544700.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:41.233Z,1520544701.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T21:31:41.234Z,1520544701.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:41.632Z,1520544701.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T21:31:41.633Z,1520544701.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:42.069Z,1520544702.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T21:31:42.070Z,1520544702.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:42.429Z,1520544702.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T21:31:42.430Z,1520544702.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:42.840Z,1520544702.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T21:31:42.841Z,1520544702.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:43.238Z,1520544703.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T21:31:43.239Z,1520544703.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:43.646Z,1520544703.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T21:31:43.647Z,1520544703.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:44.041Z,1520544704.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T21:31:44.042Z,1520544704.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:44.417Z,1520544704.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T21:31:44.418Z,1520544704.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:44.841Z,1520544704.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:45.232Z,1520544705.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:45.656Z,1520544705.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:46.025Z,1520544706.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:46.422Z,1520544706.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:46.834Z,1520544706.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:47.233Z,1520544707.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:47.634Z,1520544707.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:48.023Z,1520544708.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:48.417Z,1520544708.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:48.839Z,1520544708.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:49.228Z,1520544709.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:49.628Z,1520544709.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:50.018Z,1520544710.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:50.426Z,1520544710.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:50.827Z,1520544710.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:51.228Z,1520544711.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:51.628Z,1520544711.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:52.026Z,1520544712.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:52.419Z,1520544712.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:52.836Z,1520544712.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:53.228Z,1520544713.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:53.627Z,1520544713.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:54.020Z,1520544714.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:54.428Z,1520544714.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:54.827Z,1520544714.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:55.228Z,1520544715.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:55.627Z,1520544715.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:56.024Z,1520544716.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:56.419Z,1520544716.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:56.828Z,1520544716.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:57.229Z,1520544717.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:57.629Z,1520544717.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:58.025Z,1520544718.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:58.423Z,1520544718.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:58.829Z,1520544718.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:59.229Z,1520544719.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:31:59.627Z,1520544719.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:00.022Z,1520544720.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:00.426Z,1520544720.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:00.834Z,1520544720.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:01.229Z,1520544721.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:01.634Z,1520544721.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:01.664Z,1520544721.664 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T21:32:02.027Z,1520544722.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:02.423Z,1520544722.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:02.835Z,1520544722.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:03.228Z,1520544723.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:03.628Z,1520544723.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:04.019Z,1520544724.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:04.426Z,1520544724.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:04.839Z,1520544724.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:05.228Z,1520544725.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:05.628Z,1520544725.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:06.070Z,1520544726.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:06.431Z,1520544726.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:06.833Z,1520544726.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:07.232Z,1520544727.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:07.628Z,1520544727.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:08.076Z,1520544728.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:08.413Z,1520544728.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:08.825Z,1520544728.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:09.224Z,1520544729.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:09.623Z,1520544729.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:10.014Z,1520544730.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:10.418Z,1520544730.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:10.824Z,1520544730.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:11.228Z,1520544731.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:11.624Z,1520544731.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:12.022Z,1520544732.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:12.428Z,1520544732.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:12.839Z,1520544732.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:13.231Z,1520544733.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:13.632Z,1520544733.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:14.022Z,1520544734.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:14.418Z,1520544734.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:14.831Z,1520544734.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:15.231Z,1520544735.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:15.632Z,1520544735.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:18.719Z,1520544738.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:18.858Z,1520544738.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:19.214Z,1520544739.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:19.618Z,1520544739.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:20.000Z,1520544740.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:20.393Z,1520544740.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:20.798Z,1520544740.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:21.195Z,1520544741.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:21.594Z,1520544741.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:22.006Z,1520544742.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:22.400Z,1520544742.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:22.798Z,1520544742.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:23.195Z,1520544743.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:23.593Z,1520544743.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:23.995Z,1520544743.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:24.395Z,1520544744.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:24.800Z,1520544744.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:25.220Z,1520544745.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:25.600Z,1520544745.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:25.995Z,1520544745.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:26.398Z,1520544746.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:26.807Z,1520544746.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:27.200Z,1520544747.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:27.598Z,1520544747.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:27.995Z,1520544747.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:28.391Z,1520544748.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:28.798Z,1520544748.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:29.200Z,1520544749.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:29.606Z,1520544749.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:29.994Z,1520544749.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:30.395Z,1520544750.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:30.806Z,1520544750.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:31.206Z,1520544751.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:31.606Z,1520544751.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:31.995Z,1520544751.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:32.394Z,1520544752.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:32.801Z,1520544752.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:33.199Z,1520544753.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:33.606Z,1520544753.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:33.989Z,1520544753.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:34.394Z,1520544754.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:34.795Z,1520544754.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:35.201Z,1520544755.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:35.601Z,1520544755.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:35.000Z,1520544756.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:36.392Z,1520544756.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:36.802Z,1520544756.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:37.196Z,1520544757.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:37.592Z,1520544757.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:38.003Z,1520544758.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:38.407Z,1520544758.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:38.797Z,1520544758.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:39.194Z,1520544759.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:39.589Z,1520544759.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:39.991Z,1520544759.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:40.395Z,1520544760.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:40.798Z,1520544760.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:41.202Z,1520544761.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:41.615Z,1520544761.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:42.006Z,1520544762.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:42.395Z,1520544762.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:42.802Z,1520544762.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:43.196Z,1520544763.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:43.584Z,1520544763.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:44.004Z,1520544764.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:44.400Z,1520544764.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:44.808Z,1520544764.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:45.196Z,1520544765.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:45.596Z,1520544765.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:46.001Z,1520544766.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:46.401Z,1520544766.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:46.801Z,1520544766.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:47.209Z,1520544767.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:47.604Z,1520544767.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:48.003Z,1520544768.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:48.402Z,1520544768.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:48.810Z,1520544768.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:49.210Z,1520544769.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:49.610Z,1520544769.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:50.005Z,1520544770.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:50.407Z,1520544770.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:50.796Z,1520544770.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:51.210Z,1520544771.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:51.608Z,1520544771.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:51.979Z,1520544771.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:52.407Z,1520544772.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:52.810Z,1520544772.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:53.206Z,1520544773.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:53.610Z,1520544773.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:54.007Z,1520544774.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:54.386Z,1520544774.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:54.787Z,1520544774.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:55.211Z,1520544775.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:55.579Z,1520544775.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:56.009Z,1520544776.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:56.409Z,1520544776.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:56.788Z,1520544776.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:57.190Z,1520544777.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:57.587Z,1520544777.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:57.984Z,1520544777.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:58.387Z,1520544778.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:58.816Z,1520544778.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:59.195Z,1520544779.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:59.617Z,1520544779.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:32:59.995Z,1520544779.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:00.387Z,1520544780.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:00.818Z,1520544780.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:01.200Z,1520544781.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:01.588Z,1520544781.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:01.991Z,1520544781.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:02.391Z,1520544782.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:02.820Z,1520544782.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:03.219Z,1520544783.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:03.596Z,1520544783.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:03.988Z,1520544783.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:04.392Z,1520544784.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:04.796Z,1520544784.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:05.220Z,1520544785.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:05.618Z,1520544785.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:06.003Z,1520544786.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:06.392Z,1520544786.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:06.818Z,1520544786.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:07.219Z,1520544787.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:07.619Z,1520544787.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:07.991Z,1520544787.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:08.391Z,1520544788.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:08.819Z,1520544788.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:09.197Z,1520544789.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:09.618Z,1520544789.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:09.991Z,1520544789.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:10.391Z,1520544790.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:10.793Z,1520544790.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:11.225Z,1520544791.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:11.591Z,1520544791.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:11.993Z,1520544791.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:12.392Z,1520544792.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:12.818Z,1520544792.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:13.197Z,1520544793.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:13.621Z,1520544793.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:14.000Z,1520544794.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:14.391Z,1520544794.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:14.799Z,1520544794.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:15.196Z,1520544795.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:15.600Z,1520544795.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:15.997Z,1520544795.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:19.098Z,1520544799.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:19.241Z,1520544799.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:19.605Z,1520544799.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:20.001Z,1520544800.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:20.398Z,1520544800.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:20.795Z,1520544800.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:21.198Z,1520544801.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:21.594Z,1520544801.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:22.010Z,1520544802.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:22.406Z,1520544802.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:22.804Z,1520544802.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:23.194Z,1520544803.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:23.592Z,1520544803.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:23.995Z,1520544803.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:24.394Z,1520544804.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:24.807Z,1520544804.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:25.210Z,1520544805.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:25.604Z,1520544805.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:25.995Z,1520544805.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:26.397Z,1520544806.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:26.804Z,1520544806.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:27.207Z,1520544807.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:27.604Z,1520544807.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:27.993Z,1520544807.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:28.398Z,1520544808.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:28.801Z,1520544808.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:29.210Z,1520544809.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:29.596Z,1520544809.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:30.001Z,1520544810.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:30.393Z,1520544810.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:30.801Z,1520544810.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:31.203Z,1520544811.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:31.604Z,1520544811.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:31.997Z,1520544811.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:32.397Z,1520544812.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:32.804Z,1520544812.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:33.238Z,1520544813.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:33.607Z,1520544813.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:34.009Z,1520544814.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:34.394Z,1520544814.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:34.801Z,1520544814.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:35.206Z,1520544815.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:35.601Z,1520544815.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:35.997Z,1520544815.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:36.398Z,1520544816.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:36.797Z,1520544816.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:37.205Z,1520544817.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:37.604Z,1520544817.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:37.997Z,1520544817.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:38.399Z,1520544818.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:38.804Z,1520544818.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:39.211Z,1520544819.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:39.603Z,1520544819.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:39.994Z,1520544819.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:40.398Z,1520544820.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:40.801Z,1520544820.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:41.203Z,1520544821.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:41.601Z,1520544821.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:41.993Z,1520544821.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:42.453Z,1520544822.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:42.815Z,1520544822.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:43.212Z,1520544823.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:43.650Z,1520544823.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:43.979Z,1520544823.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:44.414Z,1520544824.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:44.810Z,1520544824.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:45.210Z,1520544825.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:45.619Z,1520544825.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:46.030Z,1520544826.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:46.414Z,1520544826.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:46.817Z,1520544826.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:47.200Z,1520544827.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:47.593Z,1520544827.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:47.998Z,1520544827.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:48.394Z,1520544828.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:48.793Z,1520544828.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:49.196Z,1520544829.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:49.604Z,1520544829.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:49.991Z,1520544829.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:50.392Z,1520544830.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:50.826Z,1520544830.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:51.193Z,1520544831.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:51.621Z,1520544831.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:51.992Z,1520544831.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:52.394Z,1520544832.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:52.797Z,1520544832.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:53.200Z,1520544833.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:53.606Z,1520544833.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:53.994Z,1520544833.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:54.393Z,1520544834.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:54.795Z,1520544834.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:55.202Z,1520544835.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:55.601Z,1520544835.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:56.046Z,1520544836.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:56.391Z,1520544836.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:56.793Z,1520544836.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:57.195Z,1520544837.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:57.595Z,1520544837.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:57.996Z,1520544837.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:58.394Z,1520544838.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:58.825Z,1520544838.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:59.191Z,1520544839.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:33:59.586Z,1520544839.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:00.001Z,1520544840.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:00.410Z,1520544840.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:00.805Z,1520544840.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:01.197Z,1520544841.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:01.598Z,1520544841.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:01.976Z,1520544841.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:02.402Z,1520544842.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:02.804Z,1520544842.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:03.206Z,1520544843.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:03.608Z,1520544843.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:04.005Z,1520544844.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:04.401Z,1520544844.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:04.799Z,1520544844.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:05.206Z,1520544845.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:05.579Z,1520544845.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:06.006Z,1520544846.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:06.418Z,1520544846.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:06.802Z,1520544846.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:07.205Z,1520544847.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:07.606Z,1520544847.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:07.978Z,1520544847.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:08.401Z,1520544848.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:08.808Z,1520544848.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:09.218Z,1520544849.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:09.614Z,1520544849.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:09.987Z,1520544849.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:10.390Z,1520544850.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:10.782Z,1520544850.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:11.219Z,1520544851.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:11.592Z,1520544851.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:12.015Z,1520544852.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:12.387Z,1520544852.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:12.791Z,1520544852.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:13.191Z,1520544853.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:13.591Z,1520544853.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:13.991Z,1520544853.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:14.412Z,1520544854.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:14.800Z,1520544854.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:15.198Z,1520544855.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:15.591Z,1520544855.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:15.991Z,1520544855.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:16.390Z,1520544856.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:19.498Z,1520544859.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:19.654Z,1520544859.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:19.996Z,1520544859.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:20.393Z,1520544860.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:20.796Z,1520544860.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:21.184Z,1520544861.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:21.208Z,1520544861.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:21.577Z,1520544861.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:21.592Z,1520544861.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:21.984Z,1520544861.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:21.999Z,1520544861.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:22.384Z,1520544862.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:22.399Z,1520544862.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:22.785Z,1520544862.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:22.800Z,1520544862.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:23.175Z,1520544863.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:23.194Z,1520544863.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:23.575Z,1520544863.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:23.603Z,1520544863.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:23.981Z,1520544863.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:23.996Z,1520544863.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:24.375Z,1520544864.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:24.398Z,1520544864.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:24.790Z,1520544864.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:24.805Z,1520544864.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:25.190Z,1520544865.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:25.205Z,1520544865.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:25.586Z,1520544865.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:25.606Z,1520544865.606 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:25.607Z,1520544865.607 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 276
2018-03-08T21:34:25.607Z,1520544865.607 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T21:34:25.609Z,1520544865.609 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:25.609Z,1520544865.609 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 276
2018-03-08T21:34:25.609Z,1520544865.609 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T21:34:25.610Z,1520544865.610 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:25.611Z,1520544865.611 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 276
2018-03-08T21:34:25.611Z,1520544865.611 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T21:34:25.643Z,1520544865.643 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T21:34:25.643Z,1520544865.643 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T21:34:25.643Z,1520544865.643 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T21:34:25.967Z,1520544865.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:26.009Z,1520544866.009 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T21:34:26.009Z,1520544866.009 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 276
2018-03-08T21:34:26.010Z,1520544866.010 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T21:34:26.010Z,1520544866.010 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 276
2018-03-08T21:34:26.010Z,1520544866.010 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T21:34:26.010Z,1520544866.010 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 276
2018-03-08T21:34:26.382Z,1520544866.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:26.396Z,1520544866.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T21:34:26.397Z,1520544866.397 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:34:26.397Z,1520544866.397 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:34:26.398Z,1520544866.398 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T21:34:26.398Z,1520544866.398 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:34:26.398Z,1520544866.398 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:34:26.399Z,1520544866.399 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T21:34:26.399Z,1520544866.399 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:34:26.399Z,1520544866.399 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:34:26.767Z,1520544866.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:26.799Z,1520544866.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T21:34:26.799Z,1520544866.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:27.194Z,1520544867.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:27.209Z,1520544867.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T21:34:27.210Z,1520544867.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:27.591Z,1520544867.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:27.607Z,1520544867.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T21:34:27.608Z,1520544867.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:27.987Z,1520544867.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:28.002Z,1520544868.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T21:34:28.003Z,1520544868.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:28.370Z,1520544868.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:28.385Z,1520544868.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T21:34:28.386Z,1520544868.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:28.776Z,1520544868.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:28.807Z,1520544868.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T21:34:28.808Z,1520544868.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:29.174Z,1520544869.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:29.209Z,1520544869.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T21:34:29.210Z,1520544869.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:29.572Z,1520544869.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:29.604Z,1520544869.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T21:34:29.613Z,1520544869.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:29.988Z,1520544869.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:30.012Z,1520544870.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T21:34:30.033Z,1520544870.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:30.390Z,1520544870.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:30.410Z,1520544870.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T21:34:30.411Z,1520544870.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:30.786Z,1520544870.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:30.806Z,1520544870.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T21:34:30.807Z,1520544870.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:31.181Z,1520544871.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:31.209Z,1520544871.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T21:34:31.210Z,1520544871.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:31.595Z,1520544871.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:31.615Z,1520544871.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T21:34:31.616Z,1520544871.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:31.981Z,1520544871.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:31.996Z,1520544871.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T21:34:31.997Z,1520544871.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:32.367Z,1520544872.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:32.398Z,1520544872.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T21:34:32.399Z,1520544872.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:32.790Z,1520544872.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:32.811Z,1520544872.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T21:34:32.812Z,1520544872.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:33.195Z,1520544873.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:33.212Z,1520544873.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T21:34:33.214Z,1520544873.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:33.591Z,1520544873.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:33.606Z,1520544873.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T21:34:33.607Z,1520544873.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:33.967Z,1520544873.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:33.994Z,1520544873.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T21:34:33.995Z,1520544873.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:34.367Z,1520544874.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:34.399Z,1520544874.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T21:34:34.400Z,1520544874.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:34.784Z,1520544874.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:34.808Z,1520544874.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T21:34:34.813Z,1520544874.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:35.195Z,1520544875.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:35.218Z,1520544875.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T21:34:35.219Z,1520544875.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:35.589Z,1520544875.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:35.611Z,1520544875.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T21:34:35.612Z,1520544875.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:35.969Z,1520544875.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:36.001Z,1520544876.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T21:34:36.002Z,1520544876.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:36.370Z,1520544876.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:36.402Z,1520544876.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T21:34:36.403Z,1520544876.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:36.777Z,1520544876.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:36.803Z,1520544876.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T21:34:36.805Z,1520544876.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:37.190Z,1520544877.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:37.206Z,1520544877.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T21:34:37.207Z,1520544877.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:37.573Z,1520544877.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:37.607Z,1520544877.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T21:34:37.608Z,1520544877.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:37.972Z,1520544877.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:38.002Z,1520544878.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T21:34:38.003Z,1520544878.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:38.367Z,1520544878.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:38.398Z,1520544878.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T21:34:38.399Z,1520544878.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:38.777Z,1520544878.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:38.803Z,1520544878.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T21:34:38.804Z,1520544878.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:39.193Z,1520544879.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:39.246Z,1520544879.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T21:34:39.247Z,1520544879.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:39.581Z,1520544879.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:39.609Z,1520544879.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T21:34:39.610Z,1520544879.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:39.967Z,1520544879.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:40.007Z,1520544880.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T21:34:40.008Z,1520544880.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:40.370Z,1520544880.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:40.410Z,1520544880.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T21:34:40.411Z,1520544880.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:40.781Z,1520544880.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:40.812Z,1520544880.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T21:34:40.813Z,1520544880.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:41.189Z,1520544881.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:41.218Z,1520544881.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T21:34:41.219Z,1520544881.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:41.589Z,1520544881.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:41.618Z,1520544881.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T21:34:41.619Z,1520544881.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:41.972Z,1520544881.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:41.987Z,1520544881.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T21:34:41.988Z,1520544881.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:42.374Z,1520544882.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:42.389Z,1520544882.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T21:34:42.389Z,1520544882.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:42.789Z,1520544882.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:42.819Z,1520544882.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T21:34:42.820Z,1520544882.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:43.177Z,1520544883.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:43.192Z,1520544883.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T21:34:43.193Z,1520544883.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:43.589Z,1520544883.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:43.618Z,1520544883.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T21:34:43.619Z,1520544883.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:43.974Z,1520544883.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:43.994Z,1520544883.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T21:34:43.995Z,1520544883.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:44.374Z,1520544884.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:44.389Z,1520544884.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T21:34:44.390Z,1520544884.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:44.790Z,1520544884.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:44.819Z,1520544884.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T21:34:44.820Z,1520544884.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:45.185Z,1520544885.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:45.200Z,1520544885.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T21:34:45.217Z,1520544885.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:45.589Z,1520544885.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:45.604Z,1520544885.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T21:34:45.621Z,1520544885.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:45.972Z,1520544885.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:45.987Z,1520544885.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:46.374Z,1520544886.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:46.410Z,1520544886.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:46.785Z,1520544886.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:46.821Z,1520544886.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:47.189Z,1520544887.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:47.218Z,1520544887.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:47.578Z,1520544887.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:47.593Z,1520544887.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:47.977Z,1520544887.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:47.992Z,1520544887.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:48.376Z,1520544888.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:48.399Z,1520544888.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:48.777Z,1520544888.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:48.793Z,1520544888.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:49.181Z,1520544889.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:49.197Z,1520544889.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:49.590Z,1520544889.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:49.623Z,1520544889.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:49.976Z,1520544889.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:49.991Z,1520544889.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:50.375Z,1520544890.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:50.391Z,1520544890.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:50.789Z,1520544890.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:50.822Z,1520544890.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:51.190Z,1520544891.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:51.226Z,1520544891.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:51.581Z,1520544891.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:51.597Z,1520544891.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:51.976Z,1520544891.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:51.991Z,1520544891.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:52.375Z,1520544892.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:52.391Z,1520544892.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:52.789Z,1520544892.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:52.821Z,1520544892.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:53.185Z,1520544893.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:53.201Z,1520544893.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:53.581Z,1520544893.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:53.597Z,1520544893.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:53.976Z,1520544893.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:53.991Z,1520544893.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:54.379Z,1520544894.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:54.394Z,1520544894.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:54.781Z,1520544894.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:54.797Z,1520544894.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:55.181Z,1520544895.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:55.197Z,1520544895.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:55.581Z,1520544895.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:55.597Z,1520544895.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:55.975Z,1520544895.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:55.991Z,1520544895.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:56.371Z,1520544896.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:56.387Z,1520544896.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:56.780Z,1520544896.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:56.795Z,1520544896.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:57.187Z,1520544897.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:57.205Z,1520544897.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:57.581Z,1520544897.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:57.597Z,1520544897.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:57.973Z,1520544897.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:57.997Z,1520544897.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:58.379Z,1520544898.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:58.395Z,1520544898.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:58.784Z,1520544898.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:58.800Z,1520544898.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:59.182Z,1520544899.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:59.210Z,1520544899.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:59.589Z,1520544899.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:59.610Z,1520544899.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:34:59.981Z,1520544899.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:34:59.996Z,1520544899.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:00.363Z,1520544900.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:00.395Z,1520544900.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:00.785Z,1520544900.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:00.800Z,1520544900.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:01.186Z,1520544901.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:01.202Z,1520544901.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:01.582Z,1520544901.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:01.609Z,1520544901.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:01.980Z,1520544901.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:02.006Z,1520544902.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:02.380Z,1520544902.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:02.395Z,1520544902.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:02.785Z,1520544902.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:02.801Z,1520544902.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:03.189Z,1520544903.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:03.211Z,1520544903.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:03.590Z,1520544903.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:03.606Z,1520544903.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:03.982Z,1520544903.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:03.998Z,1520544903.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:04.367Z,1520544904.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:04.399Z,1520544904.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:04.790Z,1520544904.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:04.810Z,1520544904.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:05.193Z,1520544905.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:05.209Z,1520544905.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:05.589Z,1520544905.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:05.610Z,1520544905.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:05.982Z,1520544905.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:05.997Z,1520544905.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:06.367Z,1520544906.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:06.407Z,1520544906.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:06.790Z,1520544906.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:06.810Z,1520544906.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:07.194Z,1520544907.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:07.210Z,1520544907.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:07.592Z,1520544907.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:07.607Z,1520544907.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:07.967Z,1520544907.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:08.005Z,1520544908.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:08.371Z,1520544908.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:08.401Z,1520544908.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:08.785Z,1520544908.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:08.809Z,1520544908.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:09.189Z,1520544909.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:09.204Z,1520544909.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:09.590Z,1520544909.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:09.606Z,1520544909.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:09.968Z,1520544909.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:10.003Z,1520544910.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:10.367Z,1520544910.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:10.393Z,1520544910.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:10.786Z,1520544910.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:10.810Z,1520544910.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:11.193Z,1520544911.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:11.211Z,1520544911.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:11.591Z,1520544911.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:11.611Z,1520544911.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:11.967Z,1520544911.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:12.003Z,1520544912.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:12.370Z,1520544912.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:12.403Z,1520544912.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:12.777Z,1520544912.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:12.806Z,1520544912.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:13.177Z,1520544913.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:13.215Z,1520544913.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:13.581Z,1520544913.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:13.609Z,1520544913.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:13.967Z,1520544913.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:13.982Z,1520544913.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:14.371Z,1520544914.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:14.386Z,1520544914.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:14.781Z,1520544914.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:14.814Z,1520544914.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:15.185Z,1520544915.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:15.209Z,1520544915.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:15.581Z,1520544915.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:15.608Z,1520544915.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:15.973Z,1520544915.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:15.988Z,1520544915.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:16.372Z,1520544916.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:16.386Z,1520544916.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:16.789Z,1520544916.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:16.816Z,1520544916.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:19.885Z,1520544919.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:19.916Z,1520544919.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:20.025Z,1520544920.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:20.062Z,1520544920.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:20.376Z,1520544920.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:20.419Z,1520544920.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:20.772Z,1520544920.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:20.787Z,1520544920.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:21.173Z,1520544921.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:21.188Z,1520544921.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:21.572Z,1520544921.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:21.587Z,1520544921.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:21.985Z,1520544921.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:22.016Z,1520544922.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:22.377Z,1520544922.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:22.393Z,1520544922.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:22.777Z,1520544922.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:22.792Z,1520544922.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:23.172Z,1520544923.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:23.187Z,1520544923.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:23.572Z,1520544923.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:23.587Z,1520544923.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:23.972Z,1520544923.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:23.994Z,1520544923.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:24.372Z,1520544924.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:24.387Z,1520544924.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:24.771Z,1520544924.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:24.786Z,1520544924.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:25.178Z,1520544925.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:25.198Z,1520544925.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:25.581Z,1520544925.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:25.596Z,1520544925.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:25.977Z,1520544925.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:25.992Z,1520544925.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:26.372Z,1520544926.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:26.394Z,1520544926.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:26.774Z,1520544926.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:26.789Z,1520544926.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:27.171Z,1520544927.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:27.187Z,1520544927.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:27.574Z,1520544927.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:27.590Z,1520544927.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:27.977Z,1520544927.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:27.993Z,1520544927.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:28.381Z,1520544928.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:28.396Z,1520544928.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:28.781Z,1520544928.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:28.796Z,1520544928.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:29.174Z,1520544929.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:29.200Z,1520544929.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:29.573Z,1520544929.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:29.589Z,1520544929.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:29.973Z,1520544929.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:29.989Z,1520544929.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:30.371Z,1520544930.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:30.386Z,1520544930.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:30.777Z,1520544930.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:30.793Z,1520544930.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:31.177Z,1520544931.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:31.198Z,1520544931.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:31.577Z,1520544931.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:31.593Z,1520544931.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:31.974Z,1520544931.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:31.990Z,1520544931.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:32.374Z,1520544932.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:32.390Z,1520544932.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:32.777Z,1520544932.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:32.793Z,1520544932.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:33.181Z,1520544933.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:33.196Z,1520544933.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:33.581Z,1520544933.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:33.596Z,1520544933.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:33.975Z,1520544933.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:33.994Z,1520544933.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:34.373Z,1520544934.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:34.388Z,1520544934.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:34.778Z,1520544934.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:34.793Z,1520544934.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:35.185Z,1520544935.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:35.221Z,1520544935.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:35.580Z,1520544935.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:35.596Z,1520544935.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:35.977Z,1520544935.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:35.992Z,1520544935.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:36.375Z,1520544936.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:36.390Z,1520544936.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:36.781Z,1520544936.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:36.796Z,1520544936.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:37.181Z,1520544937.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:37.196Z,1520544937.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:37.580Z,1520544937.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:37.596Z,1520544937.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:37.975Z,1520544937.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:37.990Z,1520544937.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:38.375Z,1520544938.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:38.390Z,1520544938.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:38.781Z,1520544938.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:38.798Z,1520544938.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:39.180Z,1520544939.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:39.195Z,1520544939.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:39.581Z,1520544939.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:39.597Z,1520544939.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:39.975Z,1520544939.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:39.991Z,1520544939.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:40.374Z,1520544940.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:40.390Z,1520544940.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:40.781Z,1520544940.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:40.799Z,1520544940.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:41.182Z,1520544941.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:41.205Z,1520544941.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:41.582Z,1520544941.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:41.602Z,1520544941.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:41.977Z,1520544941.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:41.992Z,1520544941.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:42.371Z,1520544942.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:42.390Z,1520544942.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:42.809Z,1520544942.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:42.831Z,1520544942.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:43.187Z,1520544943.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:43.203Z,1520544943.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:43.585Z,1520544943.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:43.604Z,1520544943.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:43.966Z,1520544943.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:44.010Z,1520544944.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:44.372Z,1520544944.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:44.399Z,1520544944.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:44.773Z,1520544944.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:44.809Z,1520544944.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:45.187Z,1520544945.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:45.203Z,1520544945.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:45.578Z,1520544945.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:45.606Z,1520544945.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:45.964Z,1520544945.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:46.009Z,1520544946.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:46.374Z,1520544946.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:46.405Z,1520544946.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:46.770Z,1520544946.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:46.786Z,1520544946.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:47.186Z,1520544947.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:47.210Z,1520544947.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:47.581Z,1520544947.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:47.613Z,1520544947.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:47.985Z,1520544947.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:48.016Z,1520544948.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:48.373Z,1520544948.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:48.389Z,1520544948.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:48.772Z,1520544948.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:48.787Z,1520544948.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:49.173Z,1520544949.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:49.188Z,1520544949.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:49.572Z,1520544949.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:49.587Z,1520544949.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:49.973Z,1520544949.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:49.989Z,1520544949.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:50.377Z,1520544950.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:50.392Z,1520544950.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:50.786Z,1520544950.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:50.817Z,1520544950.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:51.170Z,1520544951.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:51.186Z,1520544951.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:51.572Z,1520544951.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:51.587Z,1520544951.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:51.973Z,1520544951.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:51.988Z,1520544951.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:52.371Z,1520544952.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:52.387Z,1520544952.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:52.785Z,1520544952.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:52.816Z,1520544952.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:53.186Z,1520544953.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:53.221Z,1520544953.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:53.577Z,1520544953.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:53.592Z,1520544953.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:53.973Z,1520544953.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:53.987Z,1520544953.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:54.374Z,1520544954.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:54.389Z,1520544954.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:54.776Z,1520544954.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:54.791Z,1520544954.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:55.181Z,1520544955.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:55.196Z,1520544955.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:55.576Z,1520544955.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:55.598Z,1520544955.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:55.973Z,1520544955.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:55.988Z,1520544955.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:56.371Z,1520544956.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:56.386Z,1520544956.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:56.776Z,1520544956.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:56.798Z,1520544956.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:57.181Z,1520544957.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:57.196Z,1520544957.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:57.577Z,1520544957.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:57.598Z,1520544957.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:57.973Z,1520544957.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:57.989Z,1520544957.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:58.371Z,1520544958.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:58.386Z,1520544958.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:58.772Z,1520544958.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:58.786Z,1520544958.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:59.176Z,1520544959.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:59.191Z,1520544959.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:59.581Z,1520544959.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:59.596Z,1520544959.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:35:59.977Z,1520544959.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:35:59.998Z,1520544959.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:00.372Z,1520544960.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:00.387Z,1520544960.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:00.774Z,1520544960.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:00.789Z,1520544960.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:01.175Z,1520544961.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:01.190Z,1520544961.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:01.574Z,1520544961.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:01.594Z,1520544961.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:01.977Z,1520544961.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:01.993Z,1520544961.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:02.377Z,1520544962.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:02.398Z,1520544962.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:02.777Z,1520544962.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:02.793Z,1520544962.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:03.173Z,1520544963.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:03.189Z,1520544963.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:03.574Z,1520544963.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:03.589Z,1520544963.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:03.975Z,1520544963.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:03.994Z,1520544963.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:04.374Z,1520544964.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:04.389Z,1520544964.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:04.777Z,1520544964.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:04.798Z,1520544964.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:05.177Z,1520544965.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:05.193Z,1520544965.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:05.577Z,1520544965.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:05.592Z,1520544965.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:05.976Z,1520544965.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:05.990Z,1520544965.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:06.374Z,1520544966.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:06.389Z,1520544966.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:06.777Z,1520544966.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:06.793Z,1520544966.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:07.181Z,1520544967.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:07.195Z,1520544967.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:07.578Z,1520544967.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:07.594Z,1520544967.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:07.971Z,1520544967.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:07.987Z,1520544967.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:08.372Z,1520544968.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:08.387Z,1520544968.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:08.777Z,1520544968.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:08.793Z,1520544968.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:09.177Z,1520544969.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:09.192Z,1520544969.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:09.578Z,1520544969.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:09.598Z,1520544969.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:09.975Z,1520544969.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:09.994Z,1520544969.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:10.373Z,1520544970.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:10.389Z,1520544970.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:10.777Z,1520544970.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:10.792Z,1520544970.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:11.181Z,1520544971.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:11.197Z,1520544971.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:11.580Z,1520544971.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:11.595Z,1520544971.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:11.976Z,1520544971.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:11.990Z,1520544971.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:12.376Z,1520544972.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:12.391Z,1520544972.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:12.780Z,1520544972.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:12.795Z,1520544972.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:13.180Z,1520544973.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:13.194Z,1520544973.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:13.580Z,1520544973.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:13.602Z,1520544973.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:13.975Z,1520544973.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:13.991Z,1520544973.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:14.372Z,1520544974.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:14.387Z,1520544974.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:14.780Z,1520544974.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:14.795Z,1520544974.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:15.180Z,1520544975.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:15.195Z,1520544975.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:15.580Z,1520544975.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:15.595Z,1520544975.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:15.598Z,1520544975.598 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T21:36:15.598Z,1520544975.598 [Default:CheckIn:C.Wait] Stopped
2018-03-08T21:36:15.598Z,1520544975.598 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T21:36:15.598Z,1520544975.598 [Default:CheckIn:D] Running Loop=1
2018-03-08T21:36:15.975Z,1520544975.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:15.991Z,1520544975.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:15.994Z,1520544975.994 [Default:CheckIn:D] Stopped
2018-03-08T21:36:15.994Z,1520544975.994 [Default:CheckIn:E] Running Loop=1
2018-03-08T21:36:16.365Z,1520544976.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:16.393Z,1520544976.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:16.396Z,1520544976.396 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 830.519792 min 
2018-03-08T21:36:16.401Z,1520544976.401 [Default:CheckIn:E] Stopped
2018-03-08T21:36:16.401Z,1520544976.401 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T21:36:16.402Z,1520544976.402 [Default:CheckIn] Stopped
2018-03-08T21:36:16.402Z,1520544976.402 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T21:36:16.402Z,1520544976.402 [Default:CheckIn](INFO): Running loop #81
2018-03-08T21:36:16.402Z,1520544976.402 [Default:CheckIn] Running Loop=81
2018-03-08T21:36:16.402Z,1520544976.402 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T21:36:16.402Z,1520544976.402 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T21:36:16.820Z,1520544976.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:16.857Z,1520544976.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:20.183Z,1520544980.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:20.199Z,1520544980.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:20.316Z,1520544980.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:20.343Z,1520544980.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:20.657Z,1520544980.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:20.706Z,1520544980.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:21.046Z,1520544981.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:21.061Z,1520544981.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:21.451Z,1520544981.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:21.467Z,1520544981.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:21.869Z,1520544981.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:21.902Z,1520544981.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:22.257Z,1520544982.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:22.272Z,1520544982.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:22.653Z,1520544982.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:22.669Z,1520544982.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:23.051Z,1520544983.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:23.071Z,1520544983.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:23.455Z,1520544983.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:23.471Z,1520544983.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:23.848Z,1520544983.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:23.878Z,1520544983.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:24.257Z,1520544984.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:24.272Z,1520544984.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:24.651Z,1520544984.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:24.666Z,1520544984.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:25.056Z,1520544985.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:25.071Z,1520544985.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:25.461Z,1520544985.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:25.476Z,1520544985.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:25.869Z,1520544985.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:25.908Z,1520544985.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:26.246Z,1520544986.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:26.279Z,1520544986.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:26.658Z,1520544986.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:26.673Z,1520544986.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:27.049Z,1520544987.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:27.076Z,1520544987.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:27.443Z,1520544987.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:27.475Z,1520544987.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:27.868Z,1520544987.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:27.883Z,1520544987.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:28.268Z,1520544988.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:28.283Z,1520544988.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:28.665Z,1520544988.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:28.681Z,1520544988.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:29.059Z,1520544989.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:29.074Z,1520544989.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:29.459Z,1520544989.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:29.473Z,1520544989.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:29.844Z,1520544989.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:29.874Z,1520544989.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:30.256Z,1520544990.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:30.272Z,1520544990.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:30.655Z,1520544990.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:30.678Z,1520544990.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:31.100Z,1520544991.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:31.123Z,1520544991.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:31.468Z,1520544991.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:31.490Z,1520544991.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:31.869Z,1520544991.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:31.884Z,1520544991.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:32.259Z,1520544992.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:32.274Z,1520544992.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:32.655Z,1520544992.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:32.674Z,1520544992.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:33.058Z,1520544993.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:33.073Z,1520544993.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:33.443Z,1520544993.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:33.475Z,1520544993.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:33.865Z,1520544993.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:33.882Z,1520544993.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:34.269Z,1520544994.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:34.290Z,1520544994.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:34.658Z,1520544994.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:34.685Z,1520544994.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:35.059Z,1520544995.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:35.075Z,1520544995.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:35.447Z,1520544995.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:35.491Z,1520544995.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:35.842Z,1520544995.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:35.873Z,1520544995.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:36.252Z,1520544996.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:36.279Z,1520544996.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:36.647Z,1520544996.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:36.675Z,1520544996.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:37.057Z,1520544997.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:37.081Z,1520544997.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:37.469Z,1520544997.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:37.485Z,1520544997.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:37.865Z,1520544997.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:37.893Z,1520544997.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:38.251Z,1520544998.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:38.277Z,1520544998.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:38.647Z,1520544998.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:38.674Z,1520544998.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:39.052Z,1520544999.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:39.089Z,1520544999.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:39.444Z,1520544999.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:39.482Z,1520544999.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:39.869Z,1520544999.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:39.889Z,1520544999.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:40.269Z,1520545000.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:40.295Z,1520545000.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:40.653Z,1520545000.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:40.680Z,1520545000.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:41.047Z,1520545001.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:41.083Z,1520545001.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:41.447Z,1520545001.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:41.475Z,1520545001.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:41.844Z,1520545001.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:41.859Z,1520545001.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:42.255Z,1520545002.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:42.287Z,1520545002.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:42.655Z,1520545002.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:42.671Z,1520545002.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:43.065Z,1520545003.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:43.105Z,1520545003.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:43.465Z,1520545003.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:43.497Z,1520545003.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:43.869Z,1520545003.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:43.901Z,1520545003.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:44.258Z,1520545004.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:44.273Z,1520545004.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:44.655Z,1520545004.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:44.671Z,1520545004.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:45.056Z,1520545005.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:45.072Z,1520545005.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:45.454Z,1520545005.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:45.473Z,1520545005.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:45.861Z,1520545005.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:45.877Z,1520545005.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:46.261Z,1520545006.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:46.277Z,1520545006.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:46.660Z,1520545006.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:46.687Z,1520545006.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:47.059Z,1520545007.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:47.074Z,1520545007.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:47.462Z,1520545007.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:47.477Z,1520545007.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:47.855Z,1520545007.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:47.871Z,1520545007.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:48.254Z,1520545008.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:48.281Z,1520545008.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:48.660Z,1520545008.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:48.675Z,1520545008.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:49.058Z,1520545009.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:49.082Z,1520545009.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:49.474Z,1520545009.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:49.489Z,1520545009.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:49.874Z,1520545009.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:49.894Z,1520545009.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:50.247Z,1520545010.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:50.275Z,1520545010.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:50.647Z,1520545010.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:50.684Z,1520545010.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:51.062Z,1520545011.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:51.077Z,1520545011.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:51.443Z,1520545011.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:51.470Z,1520545011.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:51.861Z,1520545011.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:51.889Z,1520545011.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:52.276Z,1520545012.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:52.291Z,1520545012.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:52.671Z,1520545012.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:52.686Z,1520545012.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:53.047Z,1520545013.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:53.088Z,1520545013.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:53.451Z,1520545013.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:53.482Z,1520545013.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:53.855Z,1520545013.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:53.887Z,1520545013.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:54.249Z,1520545014.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:54.265Z,1520545014.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:54.655Z,1520545014.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:54.670Z,1520545014.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:55.054Z,1520545015.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:55.069Z,1520545015.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:55.465Z,1520545015.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:55.480Z,1520545015.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:55.858Z,1520545015.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:55.873Z,1520545015.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:56.247Z,1520545016.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:56.289Z,1520545016.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:56.658Z,1520545016.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:56.674Z,1520545016.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:57.058Z,1520545017.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:57.073Z,1520545017.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:57.458Z,1520545017.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:57.474Z,1520545017.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:57.860Z,1520545017.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:57.876Z,1520545017.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:58.265Z,1520545018.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:58.280Z,1520545018.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:58.664Z,1520545018.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:58.680Z,1520545018.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:59.056Z,1520545019.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:59.071Z,1520545019.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:59.455Z,1520545019.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:59.470Z,1520545019.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:36:59.859Z,1520545019.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:36:59.875Z,1520545019.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:00.260Z,1520545020.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:00.275Z,1520545020.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:00.651Z,1520545020.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:00.674Z,1520545020.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:01.061Z,1520545021.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:01.085Z,1520545021.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:01.465Z,1520545021.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:01.480Z,1520545021.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:01.865Z,1520545021.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:01.886Z,1520545021.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:02.259Z,1520545022.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:02.278Z,1520545022.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:02.655Z,1520545022.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:02.670Z,1520545022.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:03.052Z,1520545023.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:03.067Z,1520545023.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:03.459Z,1520545023.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:03.478Z,1520545023.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:03.865Z,1520545023.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:03.886Z,1520545023.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:04.265Z,1520545024.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:04.281Z,1520545024.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:04.660Z,1520545024.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:04.682Z,1520545024.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:05.051Z,1520545025.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:05.073Z,1520545025.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:05.443Z,1520545025.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:05.478Z,1520545025.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:05.859Z,1520545025.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:05.875Z,1520545025.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:06.255Z,1520545026.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:06.274Z,1520545026.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:06.657Z,1520545026.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:06.672Z,1520545026.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:07.068Z,1520545027.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:07.084Z,1520545027.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:07.468Z,1520545027.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:07.493Z,1520545027.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:07.869Z,1520545027.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:07.883Z,1520545027.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:08.259Z,1520545028.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:08.278Z,1520545028.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:08.651Z,1520545028.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:08.674Z,1520545028.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:09.043Z,1520545029.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:09.071Z,1520545029.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:09.459Z,1520545029.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:09.475Z,1520545029.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:09.865Z,1520545029.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:09.880Z,1520545029.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:10.268Z,1520545030.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:10.283Z,1520545030.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:10.666Z,1520545030.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:10.682Z,1520545030.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:11.059Z,1520545031.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:11.078Z,1520545031.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:11.456Z,1520545031.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:11.471Z,1520545031.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:11.855Z,1520545031.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:11.874Z,1520545031.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:12.253Z,1520545032.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:12.277Z,1520545032.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:12.659Z,1520545032.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:12.674Z,1520545032.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:13.069Z,1520545033.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:13.084Z,1520545033.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:13.468Z,1520545033.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:13.491Z,1520545033.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:13.869Z,1520545033.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:13.889Z,1520545033.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:14.248Z,1520545034.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:14.274Z,1520545034.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:14.646Z,1520545034.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:14.678Z,1520545034.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:15.043Z,1520545035.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:15.075Z,1520545035.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:15.459Z,1520545035.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:15.475Z,1520545035.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:15.866Z,1520545035.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:15.881Z,1520545035.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:16.273Z,1520545036.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:16.288Z,1520545036.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:16.673Z,1520545036.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:16.688Z,1520545036.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:17.059Z,1520545037.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:17.078Z,1520545037.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:20.156Z,1520545040.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:20.179Z,1520545040.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:20.274Z,1520545040.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:20.317Z,1520545040.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:20.645Z,1520545040.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:20.686Z,1520545040.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:21.060Z,1520545041.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:21.075Z,1520545041.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:21.445Z,1520545041.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:21.474Z,1520545041.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:21.832Z,1520545041.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:21.867Z,1520545041.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:22.235Z,1520545042.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:22.274Z,1520545042.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:22.635Z,1520545042.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:22.668Z,1520545042.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:23.046Z,1520545043.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:23.078Z,1520545043.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:23.456Z,1520545043.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:23.471Z,1520545043.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:23.845Z,1520545043.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:23.874Z,1520545043.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:24.232Z,1520545044.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:24.267Z,1520545044.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:24.634Z,1520545044.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:24.672Z,1520545044.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:25.029Z,1520545045.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:25.071Z,1520545045.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:25.434Z,1520545045.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:25.454Z,1520545045.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:25.845Z,1520545045.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:25.860Z,1520545045.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:26.245Z,1520545046.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:26.260Z,1520545046.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:26.641Z,1520545046.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:26.656Z,1520545046.656 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:26.657Z,1520545046.657 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 277
2018-03-08T21:37:26.657Z,1520545046.657 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T21:37:26.658Z,1520545046.658 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:26.658Z,1520545046.658 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 277
2018-03-08T21:37:26.659Z,1520545046.659 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T21:37:26.660Z,1520545046.660 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:26.661Z,1520545046.661 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 277
2018-03-08T21:37:26.661Z,1520545046.661 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T21:37:26.700Z,1520545046.700 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T21:37:26.700Z,1520545046.700 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T21:37:26.704Z,1520545046.704 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T21:37:27.037Z,1520545047.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:27.062Z,1520545047.062 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T21:37:27.062Z,1520545047.062 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 277
2018-03-08T21:37:27.063Z,1520545047.063 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T21:37:27.063Z,1520545047.063 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 277
2018-03-08T21:37:27.063Z,1520545047.063 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T21:37:27.063Z,1520545047.063 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 277
2018-03-08T21:37:27.429Z,1520545047.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:27.452Z,1520545047.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T21:37:27.452Z,1520545047.452 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:37:27.457Z,1520545047.457 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:37:27.457Z,1520545047.457 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T21:37:27.458Z,1520545047.458 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:37:27.458Z,1520545047.458 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:37:27.458Z,1520545047.458 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T21:37:27.459Z,1520545047.459 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:37:27.459Z,1520545047.459 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:37:27.828Z,1520545047.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:27.863Z,1520545047.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T21:37:27.864Z,1520545047.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:28.228Z,1520545048.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:28.256Z,1520545048.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T21:37:28.257Z,1520545048.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:28.623Z,1520545048.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:28.654Z,1520545048.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T21:37:28.655Z,1520545048.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:29.051Z,1520545049.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:29.066Z,1520545049.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T21:37:29.066Z,1520545049.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:29.452Z,1520545049.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:29.467Z,1520545049.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T21:37:29.468Z,1520545049.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:29.846Z,1520545049.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:29.870Z,1520545049.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T21:37:29.871Z,1520545049.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:30.227Z,1520545050.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:30.262Z,1520545050.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T21:37:30.263Z,1520545050.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:30.625Z,1520545050.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:30.640Z,1520545050.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T21:37:30.653Z,1520545050.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:31.028Z,1520545051.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:31.068Z,1520545051.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T21:37:31.069Z,1520545051.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:31.427Z,1520545051.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:31.466Z,1520545051.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T21:37:31.467Z,1520545051.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:31.841Z,1520545051.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:31.869Z,1520545051.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T21:37:31.870Z,1520545051.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:32.256Z,1520545052.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:32.278Z,1520545052.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T21:37:32.279Z,1520545052.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:32.646Z,1520545052.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:32.669Z,1520545052.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T21:37:32.670Z,1520545052.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:33.031Z,1520545053.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:33.046Z,1520545053.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T21:37:33.047Z,1520545053.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:33.428Z,1520545053.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:33.443Z,1520545053.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T21:37:33.444Z,1520545053.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:33.834Z,1520545053.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:33.871Z,1520545053.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T21:37:33.872Z,1520545053.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:34.236Z,1520545054.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:34.250Z,1520545054.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T21:37:34.251Z,1520545054.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:34.628Z,1520545054.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:34.659Z,1520545054.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T21:37:34.660Z,1520545054.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:35.041Z,1520545055.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:35.056Z,1520545055.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T21:37:35.057Z,1520545055.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:35.449Z,1520545055.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:35.463Z,1520545055.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T21:37:35.488Z,1520545055.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:35.836Z,1520545055.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:35.858Z,1520545055.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T21:37:35.859Z,1520545055.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:36.238Z,1520545056.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:36.252Z,1520545056.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T21:37:36.253Z,1520545056.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:36.636Z,1520545056.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:36.651Z,1520545056.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T21:37:36.652Z,1520545056.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:37.027Z,1520545057.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:37.054Z,1520545057.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T21:37:37.055Z,1520545057.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:37.440Z,1520545057.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:37.455Z,1520545057.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T21:37:37.456Z,1520545057.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:37.844Z,1520545057.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:37.859Z,1520545057.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T21:37:37.860Z,1520545057.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:38.245Z,1520545058.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:38.259Z,1520545058.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T21:37:38.261Z,1520545058.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:38.642Z,1520545058.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:38.665Z,1520545058.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T21:37:38.666Z,1520545058.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:39.035Z,1520545059.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:39.057Z,1520545059.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T21:37:39.058Z,1520545059.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:39.420Z,1520545059.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:39.455Z,1520545059.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T21:37:39.457Z,1520545059.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:39.831Z,1520545059.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:39.852Z,1520545059.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T21:37:39.853Z,1520545059.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:40.223Z,1520545060.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:40.259Z,1520545060.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T21:37:40.259Z,1520545060.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:40.624Z,1520545060.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:40.662Z,1520545060.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T21:37:40.663Z,1520545060.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:41.045Z,1520545061.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:41.060Z,1520545061.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T21:37:41.061Z,1520545061.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:41.449Z,1520545061.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:41.519Z,1520545061.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T21:37:41.520Z,1520545061.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:41.840Z,1520545061.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:41.868Z,1520545061.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T21:37:41.869Z,1520545061.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:42.246Z,1520545062.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:42.269Z,1520545062.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T21:37:42.270Z,1520545062.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:42.646Z,1520545062.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:42.666Z,1520545062.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T21:37:42.667Z,1520545062.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:43.027Z,1520545063.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:43.060Z,1520545063.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T21:37:43.065Z,1520545063.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:43.428Z,1520545063.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:43.489Z,1520545063.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T21:37:43.490Z,1520545063.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:43.866Z,1520545063.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:43.881Z,1520545063.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T21:37:43.882Z,1520545063.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:44.241Z,1520545064.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:44.266Z,1520545064.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T21:37:44.267Z,1520545064.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:44.658Z,1520545064.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:44.685Z,1520545064.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T21:37:44.686Z,1520545064.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:45.041Z,1520545065.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:45.076Z,1520545065.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T21:37:45.077Z,1520545065.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:45.427Z,1520545065.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:45.442Z,1520545065.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T21:37:45.443Z,1520545065.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:45.831Z,1520545065.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:45.846Z,1520545065.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T21:37:45.847Z,1520545065.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:46.232Z,1520545066.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:46.248Z,1520545066.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T21:37:46.249Z,1520545066.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:46.627Z,1520545066.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:46.655Z,1520545066.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T21:37:46.656Z,1520545066.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:47.049Z,1520545067.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:47.080Z,1520545067.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:47.441Z,1520545067.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:47.456Z,1520545067.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:47.837Z,1520545067.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:47.853Z,1520545067.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:48.236Z,1520545068.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:48.251Z,1520545068.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:48.635Z,1520545068.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:48.650Z,1520545068.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:49.034Z,1520545069.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:49.057Z,1520545069.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:49.438Z,1520545069.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:49.458Z,1520545069.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:49.841Z,1520545069.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:49.856Z,1520545069.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:50.245Z,1520545070.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:50.260Z,1520545070.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:50.644Z,1520545070.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:50.666Z,1520545070.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:51.041Z,1520545071.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:51.055Z,1520545071.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:51.429Z,1520545071.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:51.461Z,1520545071.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:51.835Z,1520545071.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:51.855Z,1520545071.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:52.238Z,1520545072.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:52.294Z,1520545072.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:52.636Z,1520545072.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:52.651Z,1520545072.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:53.050Z,1520545073.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:53.095Z,1520545073.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:53.456Z,1520545073.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:53.482Z,1520545073.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:53.839Z,1520545073.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:53.873Z,1520545073.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:54.227Z,1520545074.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:54.247Z,1520545074.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:54.635Z,1520545074.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:54.650Z,1520545074.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:55.035Z,1520545075.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:55.071Z,1520545075.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:55.434Z,1520545075.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:55.454Z,1520545075.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:55.845Z,1520545075.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:55.860Z,1520545075.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:56.245Z,1520545076.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:56.260Z,1520545076.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:56.649Z,1520545076.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:56.664Z,1520545076.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:57.038Z,1520545077.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:57.053Z,1520545077.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:57.427Z,1520545077.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:57.454Z,1520545077.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:57.838Z,1520545077.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:57.858Z,1520545077.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:58.236Z,1520545078.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:58.251Z,1520545078.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:58.633Z,1520545078.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:58.649Z,1520545078.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:59.045Z,1520545079.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:59.060Z,1520545079.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:59.444Z,1520545079.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:59.459Z,1520545079.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:37:59.845Z,1520545079.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:37:59.860Z,1520545079.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:00.235Z,1520545080.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:00.250Z,1520545080.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:00.636Z,1520545080.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:00.651Z,1520545080.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:01.040Z,1520545081.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:01.055Z,1520545081.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:01.439Z,1520545081.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:01.454Z,1520545081.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:01.844Z,1520545081.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:01.860Z,1520545081.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:02.244Z,1520545082.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:02.259Z,1520545082.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:02.644Z,1520545082.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:02.660Z,1520545082.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:03.036Z,1520545083.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:03.051Z,1520545083.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:03.433Z,1520545083.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:03.453Z,1520545083.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:03.838Z,1520545083.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:03.858Z,1520545083.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:04.237Z,1520545084.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:04.251Z,1520545084.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:04.624Z,1520545084.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:04.664Z,1520545084.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:05.048Z,1520545085.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:05.063Z,1520545085.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:05.449Z,1520545085.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:05.464Z,1520545085.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:05.844Z,1520545085.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:05.867Z,1520545085.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:06.237Z,1520545086.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:06.252Z,1520545086.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:06.623Z,1520545086.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:06.659Z,1520545086.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:07.024Z,1520545087.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:07.055Z,1520545087.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:07.431Z,1520545087.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:07.456Z,1520545087.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:07.850Z,1520545087.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:07.865Z,1520545087.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:08.251Z,1520545088.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:08.270Z,1520545088.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:08.651Z,1520545088.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:08.666Z,1520545088.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:09.041Z,1520545089.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:09.056Z,1520545089.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:09.425Z,1520545089.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:09.464Z,1520545089.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:09.827Z,1520545089.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:09.863Z,1520545089.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:10.242Z,1520545090.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:10.260Z,1520545090.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:10.624Z,1520545090.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:10.665Z,1520545090.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:11.047Z,1520545091.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:11.075Z,1520545091.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:11.441Z,1520545091.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:11.467Z,1520545091.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:11.838Z,1520545091.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:11.878Z,1520545091.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:12.229Z,1520545092.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:12.245Z,1520545092.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:12.626Z,1520545092.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:12.642Z,1520545092.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:13.051Z,1520545093.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:13.094Z,1520545093.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:13.427Z,1520545093.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:13.447Z,1520545093.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:13.843Z,1520545093.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:13.875Z,1520545093.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:14.241Z,1520545094.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:14.256Z,1520545094.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:14.641Z,1520545094.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:14.703Z,1520545094.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:15.031Z,1520545095.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:15.046Z,1520545095.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:15.431Z,1520545095.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:15.446Z,1520545095.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:15.827Z,1520545095.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:15.846Z,1520545095.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:16.229Z,1520545096.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:16.244Z,1520545096.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:16.623Z,1520545096.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:16.643Z,1520545096.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:17.038Z,1520545097.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:17.063Z,1520545097.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:17.445Z,1520545097.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:17.466Z,1520545097.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:20.541Z,1520545100.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:20.557Z,1520545100.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:20.657Z,1520545100.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:20.699Z,1520545100.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:21.011Z,1520545101.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:21.040Z,1520545101.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:21.408Z,1520545101.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:21.444Z,1520545101.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:21.817Z,1520545101.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:21.852Z,1520545101.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:22.235Z,1520545102.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:22.258Z,1520545102.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:22.616Z,1520545102.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:22.646Z,1520545102.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:23.045Z,1520545103.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:23.067Z,1520545103.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:23.410Z,1520545103.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:23.446Z,1520545103.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:23.817Z,1520545103.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:23.852Z,1520545103.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:24.217Z,1520545104.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:24.253Z,1520545104.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:24.621Z,1520545104.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:24.657Z,1520545104.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:25.008Z,1520545105.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:25.023Z,1520545105.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:25.399Z,1520545105.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:25.431Z,1520545105.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:25.825Z,1520545105.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:25.855Z,1520545105.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:26.213Z,1520545106.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:26.234Z,1520545106.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:26.612Z,1520545106.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:26.634Z,1520545106.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:27.012Z,1520545107.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:27.034Z,1520545107.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:27.412Z,1520545107.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:27.427Z,1520545107.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:27.812Z,1520545107.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:27.827Z,1520545107.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:28.225Z,1520545108.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:28.240Z,1520545108.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:28.617Z,1520545108.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:28.632Z,1520545108.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:28.999Z,1520545108.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:29.026Z,1520545109.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:29.403Z,1520545109.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:29.439Z,1520545109.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:29.829Z,1520545109.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:29.844Z,1520545109.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:30.228Z,1520545110.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:30.250Z,1520545110.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:30.625Z,1520545110.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:30.640Z,1520545110.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:30.999Z,1520545110.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:31.034Z,1520545111.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:31.396Z,1520545111.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:31.434Z,1520545111.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:31.822Z,1520545111.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:31.837Z,1520545111.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:32.226Z,1520545112.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:32.241Z,1520545112.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:32.617Z,1520545112.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:32.633Z,1520545112.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:33.003Z,1520545113.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:33.035Z,1520545113.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:33.406Z,1520545113.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:33.435Z,1520545113.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:33.834Z,1520545113.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:33.853Z,1520545113.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:34.236Z,1520545114.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:34.251Z,1520545114.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:34.626Z,1520545114.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:34.646Z,1520545114.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:35.007Z,1520545115.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:35.034Z,1520545115.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:35.402Z,1520545115.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:35.434Z,1520545115.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:35.821Z,1520545115.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:35.841Z,1520545115.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:36.230Z,1520545116.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:36.245Z,1520545116.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:36.621Z,1520545116.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:36.637Z,1520545116.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:37.003Z,1520545117.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:37.036Z,1520545117.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:37.400Z,1520545117.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:37.427Z,1520545117.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:37.826Z,1520545117.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:37.841Z,1520545117.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:38.213Z,1520545118.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:38.247Z,1520545118.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:38.613Z,1520545118.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:38.648Z,1520545118.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:39.007Z,1520545119.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:39.049Z,1520545119.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:39.407Z,1520545119.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:39.439Z,1520545119.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:39.809Z,1520545119.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:39.844Z,1520545119.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:40.221Z,1520545120.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:40.244Z,1520545120.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:40.616Z,1520545120.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:40.643Z,1520545120.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:41.008Z,1520545121.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:41.038Z,1520545121.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:41.402Z,1520545121.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:41.439Z,1520545121.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:41.830Z,1520545121.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:41.846Z,1520545121.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:42.227Z,1520545122.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:42.251Z,1520545122.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:42.613Z,1520545122.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:42.646Z,1520545122.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:42.000Z,1520545123.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:43.043Z,1520545123.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:43.396Z,1520545123.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:43.412Z,1520545123.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:43.818Z,1520545123.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:43.850Z,1520545123.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:44.235Z,1520545124.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:44.250Z,1520545124.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:44.614Z,1520545124.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:44.652Z,1520545124.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:45.004Z,1520545125.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:45.020Z,1520545125.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:45.410Z,1520545125.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:45.450Z,1520545125.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:45.814Z,1520545125.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:45.847Z,1520545125.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:46.233Z,1520545126.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:46.248Z,1520545126.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:46.633Z,1520545126.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:46.648Z,1520545126.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:47.011Z,1520545127.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:47.047Z,1520545127.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:47.410Z,1520545127.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:47.451Z,1520545127.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:47.822Z,1520545127.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:47.855Z,1520545127.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:48.217Z,1520545128.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:48.250Z,1520545128.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:48.625Z,1520545128.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:48.657Z,1520545128.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:49.012Z,1520545129.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:49.027Z,1520545129.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:49.399Z,1520545129.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:49.431Z,1520545129.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:49.825Z,1520545129.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:49.857Z,1520545129.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:50.225Z,1520545130.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:50.257Z,1520545130.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:50.614Z,1520545130.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:50.629Z,1520545130.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:51.031Z,1520545131.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:51.053Z,1520545131.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:51.409Z,1520545131.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:51.436Z,1520545131.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:51.813Z,1520545131.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:51.829Z,1520545131.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:52.217Z,1520545132.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:52.232Z,1520545132.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:52.625Z,1520545132.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:52.657Z,1520545132.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:53.011Z,1520545133.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:53.026Z,1520545133.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:53.412Z,1520545133.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:53.435Z,1520545133.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:53.877Z,1520545133.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:53.994Z,1520545133.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:54.225Z,1520545134.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:54.256Z,1520545134.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:54.617Z,1520545134.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:54.633Z,1520545134.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:55.012Z,1520545135.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:55.034Z,1520545135.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:55.405Z,1520545135.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:55.428Z,1520545135.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:55.817Z,1520545135.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:55.833Z,1520545135.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:56.221Z,1520545136.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:56.236Z,1520545136.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:56.616Z,1520545136.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:56.705Z,1520545136.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:57.013Z,1520545137.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:57.028Z,1520545137.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:57.415Z,1520545137.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:57.430Z,1520545137.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:57.816Z,1520545137.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:57.831Z,1520545137.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:58.221Z,1520545138.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:58.236Z,1520545138.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:58.617Z,1520545138.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:58.638Z,1520545138.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:59.009Z,1520545139.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:59.024Z,1520545139.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:59.411Z,1520545139.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:59.431Z,1520545139.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:38:59.817Z,1520545139.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:38:59.833Z,1520545139.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:00.217Z,1520545140.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:00.233Z,1520545140.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:00.617Z,1520545140.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:00.633Z,1520545140.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:01.015Z,1520545141.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:01.030Z,1520545141.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:01.413Z,1520545141.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:01.429Z,1520545141.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:01.817Z,1520545141.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:01.833Z,1520545141.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:02.229Z,1520545142.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:02.244Z,1520545142.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:02.614Z,1520545142.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:02.641Z,1520545142.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:03.019Z,1520545143.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:03.035Z,1520545143.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:03.414Z,1520545143.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:03.434Z,1520545143.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:03.821Z,1520545143.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:03.836Z,1520545143.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:04.222Z,1520545144.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:04.237Z,1520545144.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:04.620Z,1520545144.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:04.638Z,1520545144.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:05.016Z,1520545145.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:05.031Z,1520545145.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:05.410Z,1520545145.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:05.430Z,1520545145.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:05.821Z,1520545145.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:05.838Z,1520545145.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:06.221Z,1520545146.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:06.237Z,1520545146.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:06.620Z,1520545146.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:06.639Z,1520545146.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:07.014Z,1520545147.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:07.029Z,1520545147.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:07.404Z,1520545147.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:07.431Z,1520545147.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:07.828Z,1520545147.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:07.850Z,1520545147.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:08.229Z,1520545148.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:08.250Z,1520545148.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:08.616Z,1520545148.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:08.640Z,1520545148.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:09.017Z,1520545149.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:09.032Z,1520545149.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:09.403Z,1520545149.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:09.435Z,1520545149.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:09.813Z,1520545149.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:09.840Z,1520545149.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:10.225Z,1520545150.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:10.244Z,1520545150.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:10.621Z,1520545150.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:10.654Z,1520545150.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:11.007Z,1520545151.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:11.040Z,1520545151.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:11.402Z,1520545151.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:11.438Z,1520545151.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:11.827Z,1520545151.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:11.842Z,1520545151.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:12.227Z,1520545152.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:12.247Z,1520545152.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:12.625Z,1520545152.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:12.641Z,1520545152.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:13.053Z,1520545153.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:13.068Z,1520545153.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:13.417Z,1520545153.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:13.432Z,1520545153.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:13.833Z,1520545153.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:13.864Z,1520545153.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:14.221Z,1520545154.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:14.237Z,1520545154.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:14.616Z,1520545154.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:14.632Z,1520545154.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:15.015Z,1520545155.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:15.031Z,1520545155.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:15.415Z,1520545155.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:15.431Z,1520545155.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:15.821Z,1520545155.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:15.836Z,1520545155.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:16.220Z,1520545156.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:16.235Z,1520545156.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:16.621Z,1520545156.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:16.637Z,1520545156.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:17.015Z,1520545157.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:17.031Z,1520545157.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:17.411Z,1520545157.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:17.426Z,1520545157.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:17.821Z,1520545157.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:17.836Z,1520545157.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:20.914Z,1520545160.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:20.930Z,1520545160.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:21.041Z,1520545161.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:21.075Z,1520545161.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:21.391Z,1520545161.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:21.422Z,1520545161.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:21.784Z,1520545161.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:21.799Z,1520545161.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:22.189Z,1520545162.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:22.205Z,1520545162.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:22.584Z,1520545162.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:22.609Z,1520545162.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:22.994Z,1520545162.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:23.009Z,1520545163.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:23.395Z,1520545163.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:23.418Z,1520545163.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:23.797Z,1520545163.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:23.818Z,1520545163.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:24.193Z,1520545164.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:24.209Z,1520545164.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:24.580Z,1520545164.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:24.613Z,1520545164.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:24.992Z,1520545164.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:25.008Z,1520545165.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:25.388Z,1520545165.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:25.404Z,1520545165.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:25.797Z,1520545165.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:25.812Z,1520545165.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:26.197Z,1520545166.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:26.213Z,1520545166.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:26.597Z,1520545166.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:26.612Z,1520545166.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:26.988Z,1520545166.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:27.003Z,1520545167.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:27.381Z,1520545167.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:27.409Z,1520545167.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:27.801Z,1520545167.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:27.817Z,1520545167.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:28.203Z,1520545168.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:28.227Z,1520545168.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:28.601Z,1520545168.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:28.622Z,1520545168.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:28.992Z,1520545168.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:29.007Z,1520545169.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:29.376Z,1520545169.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:29.416Z,1520545169.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:29.802Z,1520545169.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:29.817Z,1520545169.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:30.202Z,1520545170.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:30.217Z,1520545170.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:30.593Z,1520545170.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:30.621Z,1520545170.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:30.983Z,1520545170.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:31.010Z,1520545171.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:31.378Z,1520545171.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:31.421Z,1520545171.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:31.797Z,1520545171.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:31.813Z,1520545171.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:32.197Z,1520545172.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:32.225Z,1520545172.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:32.602Z,1520545172.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:32.617Z,1520545172.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:32.984Z,1520545172.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:33.013Z,1520545173.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:33.378Z,1520545173.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:33.414Z,1520545173.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:33.802Z,1520545173.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:33.817Z,1520545173.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:34.205Z,1520545174.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:34.221Z,1520545174.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:34.601Z,1520545174.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:34.616Z,1520545174.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:34.980Z,1520545174.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:35.015Z,1520545175.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:35.383Z,1520545175.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:35.414Z,1520545175.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:35.789Z,1520545175.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:35.827Z,1520545175.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:36.206Z,1520545176.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:36.226Z,1520545176.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:36.589Z,1520545176.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:36.615Z,1520545176.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:36.987Z,1520545176.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:37.019Z,1520545177.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:37.383Z,1520545177.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:37.419Z,1520545177.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:37.785Z,1520545177.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:37.821Z,1520545177.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:38.197Z,1520545178.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:38.223Z,1520545178.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:38.592Z,1520545178.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:38.627Z,1520545178.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:38.983Z,1520545178.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:38.999Z,1520545178.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:39.386Z,1520545179.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:39.422Z,1520545179.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:39.798Z,1520545179.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:39.823Z,1520545179.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:40.208Z,1520545180.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:40.231Z,1520545180.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:40.601Z,1520545180.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:40.616Z,1520545180.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:40.987Z,1520545180.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:41.014Z,1520545181.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:41.376Z,1520545181.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:41.404Z,1520545181.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:41.802Z,1520545181.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:41.817Z,1520545181.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:42.202Z,1520545182.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:42.222Z,1520545182.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:42.585Z,1520545182.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:42.621Z,1520545182.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:42.983Z,1520545182.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:43.014Z,1520545183.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:43.387Z,1520545183.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:43.484Z,1520545183.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:43.787Z,1520545183.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:43.823Z,1520545183.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:44.194Z,1520545184.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:44.229Z,1520545184.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:44.599Z,1520545184.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:44.650Z,1520545184.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:44.985Z,1520545184.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:45.000Z,1520545185.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:45.396Z,1520545185.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:45.424Z,1520545185.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:45.778Z,1520545185.778 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T21:39:45.779Z,1520545185.779 [NAL9602] Data Fault, FailCount= 2
2018-03-08T21:39:45.779Z,1520545185.779 [NAL9602](ERROR): Data Fault
2018-03-08T21:39:45.795Z,1520545185.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:45.847Z,1520545185.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:45.892Z,1520545185.892 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T21:39:46.171Z,1520545186.171 [NAL9602](INFO): Powering down
2018-03-08T21:39:46.189Z,1520545186.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:46.205Z,1520545186.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:46.602Z,1520545186.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:46.647Z,1520545186.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:46.995Z,1520545186.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:47.031Z,1520545187.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:47.056Z,1520545187.056 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T21:39:47.056Z,1520545187.056 [NAL9602] No Fault, FailCount= 2
2018-03-08T21:39:47.388Z,1520545187.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:47.403Z,1520545187.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:47.787Z,1520545187.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:47.806Z,1520545187.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:48.189Z,1520545188.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:48.204Z,1520545188.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:48.584Z,1520545188.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:48.600Z,1520545188.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:48.990Z,1520545188.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:49.005Z,1520545189.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:49.392Z,1520545189.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:49.407Z,1520545189.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:49.784Z,1520545189.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:49.800Z,1520545189.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:50.192Z,1520545190.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:50.206Z,1520545190.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:50.591Z,1520545190.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:50.606Z,1520545190.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:50.982Z,1520545190.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:50.998Z,1520545190.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:51.396Z,1520545191.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:51.411Z,1520545191.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:51.789Z,1520545191.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:51.805Z,1520545191.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:52.191Z,1520545192.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:52.207Z,1520545192.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:52.590Z,1520545192.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:52.605Z,1520545192.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:52.991Z,1520545192.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:53.006Z,1520545193.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:53.390Z,1520545193.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:53.406Z,1520545193.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:53.787Z,1520545193.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:53.802Z,1520545193.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:54.192Z,1520545194.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:54.207Z,1520545194.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:54.590Z,1520545194.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:54.605Z,1520545194.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:54.991Z,1520545194.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:55.006Z,1520545195.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:55.391Z,1520545195.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:55.406Z,1520545195.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:55.782Z,1520545195.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:55.798Z,1520545195.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:56.189Z,1520545196.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:56.204Z,1520545196.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:56.591Z,1520545196.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:56.606Z,1520545196.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:56.990Z,1520545196.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:57.006Z,1520545197.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:57.392Z,1520545197.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:57.407Z,1520545197.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:57.785Z,1520545197.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:57.806Z,1520545197.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:58.192Z,1520545198.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:58.208Z,1520545198.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:58.591Z,1520545198.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:58.626Z,1520545198.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:58.981Z,1520545198.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:59.005Z,1520545199.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:59.388Z,1520545199.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:59.403Z,1520545199.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:39:59.793Z,1520545199.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:39:59.807Z,1520545199.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:00.190Z,1520545200.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:00.205Z,1520545200.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:00.584Z,1520545200.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:00.599Z,1520545200.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:00.990Z,1520545200.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:01.005Z,1520545201.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:01.382Z,1520545201.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:01.404Z,1520545201.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:01.793Z,1520545201.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:01.808Z,1520545201.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:02.185Z,1520545202.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:02.215Z,1520545202.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:02.584Z,1520545202.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:02.601Z,1520545202.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:02.987Z,1520545202.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:03.011Z,1520545203.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:03.391Z,1520545203.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:03.414Z,1520545203.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:03.782Z,1520545203.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:03.798Z,1520545203.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:04.181Z,1520545204.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:04.210Z,1520545204.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:04.591Z,1520545204.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:04.606Z,1520545204.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:04.983Z,1520545204.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:05.007Z,1520545205.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:05.382Z,1520545205.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:05.398Z,1520545205.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:05.788Z,1520545205.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:05.810Z,1520545205.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:06.185Z,1520545206.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:06.200Z,1520545206.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:06.591Z,1520545206.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:06.607Z,1520545206.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:06.987Z,1520545206.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:07.006Z,1520545207.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:07.390Z,1520545207.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:07.405Z,1520545207.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:07.787Z,1520545207.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:07.803Z,1520545207.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:08.187Z,1520545208.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:08.201Z,1520545208.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:08.572Z,1520545208.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:08.599Z,1520545208.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:08.983Z,1520545208.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:08.999Z,1520545208.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:09.386Z,1520545209.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:09.401Z,1520545209.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:09.786Z,1520545209.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:09.801Z,1520545209.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:10.191Z,1520545210.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:10.207Z,1520545210.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:10.593Z,1520545210.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:10.686Z,1520545210.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:10.972Z,1520545210.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:10.998Z,1520545210.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:11.391Z,1520545211.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:11.407Z,1520545211.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:11.791Z,1520545211.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:11.805Z,1520545211.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:12.192Z,1520545212.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:12.206Z,1520545212.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:12.591Z,1520545212.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:12.606Z,1520545212.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:12.991Z,1520545212.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:13.014Z,1520545213.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:13.382Z,1520545213.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:13.410Z,1520545213.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:13.791Z,1520545213.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:13.806Z,1520545213.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:14.184Z,1520545214.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:14.210Z,1520545214.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:14.572Z,1520545214.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:14.598Z,1520545214.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:14.991Z,1520545214.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:15.006Z,1520545215.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:15.390Z,1520545215.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:15.410Z,1520545215.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:15.772Z,1520545215.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:15.798Z,1520545215.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:16.191Z,1520545216.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:16.207Z,1520545216.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:16.566Z,1520545216.566 [NAL9602](INFO): Powering up NAL9602
2018-03-08T21:40:16.595Z,1520545216.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:16.610Z,1520545216.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:16.982Z,1520545216.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:16.998Z,1520545216.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:17.382Z,1520545217.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:17.398Z,1520545217.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:17.786Z,1520545217.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:17.801Z,1520545217.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:18.190Z,1520545218.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:18.228Z,1520545218.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:21.286Z,1520545221.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:21.301Z,1520545221.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:21.400Z,1520545221.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:21.442Z,1520545221.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:21.751Z,1520545221.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:21.766Z,1520545221.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:22.151Z,1520545222.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:22.167Z,1520545222.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:22.550Z,1520545222.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:22.566Z,1520545222.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:22.951Z,1520545222.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:22.966Z,1520545222.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:23.351Z,1520545223.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:23.367Z,1520545223.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:23.748Z,1520545223.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:23.764Z,1520545223.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:24.147Z,1520545224.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:24.171Z,1520545224.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:24.557Z,1520545224.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:24.573Z,1520545224.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:24.951Z,1520545224.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:24.967Z,1520545224.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:25.351Z,1520545225.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:25.376Z,1520545225.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:25.752Z,1520545225.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:25.768Z,1520545225.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:26.156Z,1520545226.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:26.171Z,1520545226.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:26.556Z,1520545226.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:26.571Z,1520545226.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:26.952Z,1520545226.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:26.968Z,1520545226.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:27.369Z,1520545227.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:27.392Z,1520545227.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:27.735Z,1520545227.735 [NAL9602](INFO): NAL9602 initialized
2018-03-08T21:40:27.757Z,1520545227.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:27.781Z,1520545227.781 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:27.781Z,1520545227.781 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 278
2018-03-08T21:40:27.781Z,1520545227.781 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T21:40:27.783Z,1520545227.783 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:27.783Z,1520545227.783 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 278
2018-03-08T21:40:27.783Z,1520545227.783 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T21:40:27.789Z,1520545227.789 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:27.789Z,1520545227.789 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 278
2018-03-08T21:40:27.789Z,1520545227.789 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T21:40:27.817Z,1520545227.817 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T21:40:27.817Z,1520545227.817 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T21:40:27.818Z,1520545227.818 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T21:40:28.163Z,1520545228.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:28.217Z,1520545228.217 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T21:40:28.217Z,1520545228.217 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 278
2018-03-08T21:40:28.218Z,1520545228.218 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T21:40:28.218Z,1520545228.218 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 278
2018-03-08T21:40:28.218Z,1520545228.218 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T21:40:28.219Z,1520545228.219 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 278
2018-03-08T21:40:28.566Z,1520545228.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:28.580Z,1520545228.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T21:40:28.580Z,1520545228.580 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:40:28.581Z,1520545228.581 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:40:28.581Z,1520545228.581 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T21:40:28.582Z,1520545228.582 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:40:28.582Z,1520545228.582 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:40:28.582Z,1520545228.582 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T21:40:28.583Z,1520545228.583 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:40:28.583Z,1520545228.583 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:40:28.969Z,1520545228.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:28.984Z,1520545228.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T21:40:28.985Z,1520545228.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:29.370Z,1520545229.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:29.385Z,1520545229.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T21:40:29.385Z,1520545229.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:29.751Z,1520545229.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:29.773Z,1520545229.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T21:40:29.774Z,1520545229.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:30.151Z,1520545230.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:30.173Z,1520545230.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T21:40:30.174Z,1520545230.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:30.552Z,1520545230.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:30.585Z,1520545230.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T21:40:30.586Z,1520545230.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:30.956Z,1520545230.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:30.979Z,1520545230.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T21:40:30.980Z,1520545230.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:31.356Z,1520545231.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:31.371Z,1520545231.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T21:40:31.372Z,1520545231.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:31.770Z,1520545231.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:31.785Z,1520545231.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T21:40:31.786Z,1520545231.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:32.169Z,1520545232.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:32.184Z,1520545232.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T21:40:32.185Z,1520545232.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:32.569Z,1520545232.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:32.590Z,1520545232.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T21:40:32.591Z,1520545232.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:32.962Z,1520545232.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:32.982Z,1520545232.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T21:40:32.983Z,1520545232.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:33.361Z,1520545233.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:33.382Z,1520545233.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T21:40:33.383Z,1520545233.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:33.762Z,1520545233.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:33.777Z,1520545233.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T21:40:33.778Z,1520545233.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:34.162Z,1520545234.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:34.177Z,1520545234.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T21:40:34.178Z,1520545234.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:34.570Z,1520545234.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:34.586Z,1520545234.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T21:40:34.587Z,1520545234.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:34.970Z,1520545234.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:34.985Z,1520545234.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T21:40:34.986Z,1520545234.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:35.362Z,1520545235.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:35.390Z,1520545235.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T21:40:35.391Z,1520545235.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:35.762Z,1520545235.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:35.777Z,1520545235.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T21:40:35.778Z,1520545235.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:36.163Z,1520545236.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:36.178Z,1520545236.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T21:40:36.179Z,1520545236.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:36.562Z,1520545236.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:36.578Z,1520545236.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T21:40:36.579Z,1520545236.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:36.943Z,1520545236.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:36.975Z,1520545236.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T21:40:36.976Z,1520545236.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:37.378Z,1520545237.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:37.392Z,1520545237.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T21:40:37.393Z,1520545237.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:37.775Z,1520545237.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:37.790Z,1520545237.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T21:40:37.791Z,1520545237.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:38.171Z,1520545238.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:38.217Z,1520545238.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T21:40:38.218Z,1520545238.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:38.552Z,1520545238.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:38.579Z,1520545238.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T21:40:38.581Z,1520545238.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:38.943Z,1520545238.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:38.977Z,1520545238.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T21:40:38.978Z,1520545238.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:39.370Z,1520545239.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:39.385Z,1520545239.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T21:40:39.386Z,1520545239.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:39.773Z,1520545239.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:39.795Z,1520545239.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T21:40:39.796Z,1520545239.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:40.174Z,1520545240.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:40.190Z,1520545240.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T21:40:40.191Z,1520545240.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:40.552Z,1520545240.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:40.579Z,1520545240.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T21:40:40.580Z,1520545240.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:40.947Z,1520545240.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:40.973Z,1520545240.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T21:40:40.974Z,1520545240.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:41.370Z,1520545241.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:41.385Z,1520545241.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T21:40:41.386Z,1520545241.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:41.773Z,1520545241.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:41.794Z,1520545241.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T21:40:41.795Z,1520545241.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:42.174Z,1520545242.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:42.190Z,1520545242.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T21:40:42.191Z,1520545242.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:42.552Z,1520545242.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:42.578Z,1520545242.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T21:40:42.579Z,1520545242.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:42.951Z,1520545242.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:42.978Z,1520545242.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T21:40:42.979Z,1520545242.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:43.366Z,1520545243.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:43.381Z,1520545243.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T21:40:43.382Z,1520545243.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:43.767Z,1520545243.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:43.803Z,1520545243.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T21:40:43.804Z,1520545243.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:44.161Z,1520545244.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:44.191Z,1520545244.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T21:40:44.192Z,1520545244.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:44.559Z,1520545244.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:44.584Z,1520545244.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T21:40:44.585Z,1520545244.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:44.954Z,1520545244.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:44.983Z,1520545244.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T21:40:44.984Z,1520545244.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:45.369Z,1520545245.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:45.399Z,1520545245.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T21:40:45.400Z,1520545245.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:45.765Z,1520545245.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:45.780Z,1520545245.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T21:40:45.793Z,1520545245.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:46.169Z,1520545246.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:46.184Z,1520545246.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T21:40:46.209Z,1520545246.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:46.552Z,1520545246.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:46.567Z,1520545246.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T21:40:46.568Z,1520545246.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:46.957Z,1520545246.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:46.973Z,1520545246.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T21:40:46.974Z,1520545246.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:47.356Z,1520545247.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:47.371Z,1520545247.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T21:40:47.372Z,1520545247.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:47.769Z,1520545247.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:47.801Z,1520545247.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:48.165Z,1520545248.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:48.181Z,1520545248.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:48.561Z,1520545248.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:48.582Z,1520545248.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:48.953Z,1520545248.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:48.968Z,1520545248.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:49.359Z,1520545249.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:49.375Z,1520545249.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:49.761Z,1520545249.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:49.776Z,1520545249.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:50.159Z,1520545250.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:50.185Z,1520545250.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:50.561Z,1520545250.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:50.577Z,1520545250.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:50.961Z,1520545250.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:50.976Z,1520545250.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:51.365Z,1520545251.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:51.381Z,1520545251.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:51.755Z,1520545251.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:51.771Z,1520545251.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:52.159Z,1520545252.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:52.175Z,1520545252.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:52.555Z,1520545252.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:52.571Z,1520545252.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:52.959Z,1520545252.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:52.974Z,1520545252.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:53.362Z,1520545253.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:53.377Z,1520545253.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:53.765Z,1520545253.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:53.781Z,1520545253.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:54.165Z,1520545254.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:54.181Z,1520545254.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:54.558Z,1520545254.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:54.574Z,1520545254.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:54.959Z,1520545254.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:54.975Z,1520545254.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:55.365Z,1520545255.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:55.381Z,1520545255.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:55.765Z,1520545255.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:55.780Z,1520545255.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:56.165Z,1520545256.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:56.186Z,1520545256.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:56.558Z,1520545256.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:56.574Z,1520545256.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:56.960Z,1520545256.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:56.975Z,1520545256.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:57.365Z,1520545257.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:57.380Z,1520545257.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:57.765Z,1520545257.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:57.781Z,1520545257.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:58.165Z,1520545258.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:58.186Z,1520545258.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:58.558Z,1520545258.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:58.574Z,1520545258.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:58.957Z,1520545258.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:58.972Z,1520545258.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:59.365Z,1520545259.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:59.381Z,1520545259.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:40:59.765Z,1520545259.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:40:59.781Z,1520545259.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:00.166Z,1520545260.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:00.181Z,1520545260.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:00.557Z,1520545260.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:00.572Z,1520545260.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:00.956Z,1520545260.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:00.977Z,1520545260.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:01.366Z,1520545261.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:01.381Z,1520545261.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:01.765Z,1520545261.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:01.780Z,1520545261.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:02.165Z,1520545262.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:02.181Z,1520545262.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:02.561Z,1520545262.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:02.576Z,1520545262.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:02.960Z,1520545262.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:02.976Z,1520545262.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:03.365Z,1520545263.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:03.382Z,1520545263.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:03.765Z,1520545263.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:03.780Z,1520545263.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:04.165Z,1520545264.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:04.181Z,1520545264.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:04.561Z,1520545264.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:04.576Z,1520545264.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:04.960Z,1520545264.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:04.975Z,1520545264.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:05.365Z,1520545265.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:05.380Z,1520545265.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:05.765Z,1520545265.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:05.781Z,1520545265.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:06.164Z,1520545266.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:06.186Z,1520545266.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:06.561Z,1520545266.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:06.576Z,1520545266.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:06.960Z,1520545266.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:06.976Z,1520545266.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:07.364Z,1520545267.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:07.380Z,1520545267.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:07.765Z,1520545267.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:07.780Z,1520545267.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:08.166Z,1520545268.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:08.182Z,1520545268.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:08.561Z,1520545268.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:08.576Z,1520545268.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:08.961Z,1520545268.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:08.976Z,1520545268.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:09.365Z,1520545269.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:09.381Z,1520545269.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:09.766Z,1520545269.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:09.781Z,1520545269.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:10.167Z,1520545270.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:10.182Z,1520545270.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:10.552Z,1520545270.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:10.580Z,1520545270.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:10.957Z,1520545270.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:10.977Z,1520545270.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:11.358Z,1520545271.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:11.373Z,1520545271.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:11.764Z,1520545271.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:11.788Z,1520545271.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:12.171Z,1520545272.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:12.187Z,1520545272.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:12.576Z,1520545272.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:12.591Z,1520545272.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:12.943Z,1520545272.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:12.966Z,1520545272.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:13.352Z,1520545273.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:13.380Z,1520545273.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:13.749Z,1520545273.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:13.779Z,1520545273.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:14.153Z,1520545274.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:14.181Z,1520545274.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:14.565Z,1520545274.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:14.586Z,1520545274.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:14.978Z,1520545274.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:14.993Z,1520545274.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:15.376Z,1520545275.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:15.391Z,1520545275.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:15.748Z,1520545275.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:15.780Z,1520545275.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:16.151Z,1520545276.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:16.191Z,1520545276.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:16.545Z,1520545276.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:16.560Z,1520545276.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:16.579Z,1520545276.579 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T21:36:16.4Z
2018-03-08T21:41:16.580Z,1520545276.580 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T21:41:16.580Z,1520545276.580 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T21:41:16.952Z,1520545276.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:16.980Z,1520545276.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:17.451Z,1520545277.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:17.466Z,1520545277.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:17.762Z,1520545277.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:17.791Z,1520545277.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:20.879Z,1520545280.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:20.895Z,1520545280.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:21.001Z,1520545281.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:21.046Z,1520545281.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:21.328Z,1520545281.328 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0324.lzma
2018-03-08T21:41:21.351Z,1520545281.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:21.367Z,1520545281.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:21.753Z,1520545281.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:21.768Z,1520545281.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:22.123Z,1520545282.123 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0324.lzma.bak
2018-03-08T21:41:22.124Z,1520545282.124 [DataOverHttps](INFO): SBD MOMSN=7989357
2018-03-08T21:41:22.160Z,1520545282.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:22.176Z,1520545282.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:22.874Z,1520545282.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:22.904Z,1520545282.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:23.039Z,1520545283.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:23.071Z,1520545283.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:26.697Z,1520545286.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:26.713Z,1520545286.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:26.812Z,1520545286.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:26.858Z,1520545286.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:27.166Z,1520545287.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:27.182Z,1520545287.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:27.567Z,1520545287.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:27.583Z,1520545287.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:27.964Z,1520545287.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:27.979Z,1520545287.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:28.381Z,1520545288.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:28.412Z,1520545288.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:31.511Z,1520545291.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:31.527Z,1520545291.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:31.630Z,1520545291.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:31.657Z,1520545291.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:31.993Z,1520545291.993 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180308T074127/Express0325.lzma
2018-03-08T21:41:32.026Z,1520545292.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:32.053Z,1520545292.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:32.420Z,1520545292.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:32.436Z,1520545292.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:32.788Z,1520545292.788 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0325.lzma.bak
2018-03-08T21:41:32.788Z,1520545292.788 [DataOverHttps](INFO): SBD MOMSN=7989359
2018-03-08T21:41:32.831Z,1520545292.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:32.847Z,1520545292.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:33.421Z,1520545293.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:33.436Z,1520545293.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:33.439Z,1520545293.439 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T21:41:33.439Z,1520545293.439 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T21:41:33.439Z,1520545293.439 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T21:41:33.624Z,1520545293.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:33.640Z,1520545293.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:34.025Z,1520545294.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:34.040Z,1520545294.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:37.125Z,1520545297.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:37.141Z,1520545297.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:37.241Z,1520545297.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:37.279Z,1520545297.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:37.629Z,1520545297.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:37.645Z,1520545297.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:38.021Z,1520545298.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:38.052Z,1520545298.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:38.429Z,1520545298.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:38.446Z,1520545298.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:38.841Z,1520545298.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:38.856Z,1520545298.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:39.234Z,1520545299.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:39.249Z,1520545299.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:39.616Z,1520545299.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:39.653Z,1520545299.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:40.028Z,1520545300.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:40.043Z,1520545300.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:40.424Z,1520545300.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:40.440Z,1520545300.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:40.829Z,1520545300.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:40.845Z,1520545300.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:41.222Z,1520545301.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:41.249Z,1520545301.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:41.640Z,1520545301.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:41.698Z,1520545301.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:42.037Z,1520545302.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:42.053Z,1520545302.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:42.444Z,1520545302.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:42.460Z,1520545302.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:42.820Z,1520545302.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:42.856Z,1520545302.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:43.217Z,1520545303.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:43.259Z,1520545303.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:43.641Z,1520545303.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:43.668Z,1520545303.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:44.021Z,1520545304.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:44.050Z,1520545304.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:44.425Z,1520545304.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:44.452Z,1520545304.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:44.838Z,1520545304.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:44.853Z,1520545304.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:45.229Z,1520545305.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:45.255Z,1520545305.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:45.614Z,1520545305.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:45.659Z,1520545305.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:46.024Z,1520545306.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:46.046Z,1520545306.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:46.424Z,1520545306.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:46.439Z,1520545306.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:46.825Z,1520545306.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:46.840Z,1520545306.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:47.228Z,1520545307.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:47.243Z,1520545307.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:47.625Z,1520545307.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:47.640Z,1520545307.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:48.024Z,1520545308.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:48.040Z,1520545308.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:48.425Z,1520545308.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:48.441Z,1520545308.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:48.824Z,1520545308.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:48.839Z,1520545308.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:49.224Z,1520545309.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:49.239Z,1520545309.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:49.622Z,1520545309.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:49.637Z,1520545309.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:50.023Z,1520545310.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:50.038Z,1520545310.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:50.425Z,1520545310.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:50.446Z,1520545310.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:50.832Z,1520545310.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:50.847Z,1520545310.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:51.233Z,1520545311.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:51.247Z,1520545311.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:51.613Z,1520545311.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:51.636Z,1520545311.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:52.023Z,1520545312.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:52.038Z,1520545312.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:52.419Z,1520545312.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:52.434Z,1520545312.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:52.815Z,1520545312.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:52.843Z,1520545312.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:53.227Z,1520545313.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:53.247Z,1520545313.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:53.637Z,1520545313.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:53.652Z,1520545313.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:54.033Z,1520545314.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:54.048Z,1520545314.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:54.433Z,1520545314.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:54.449Z,1520545314.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:54.828Z,1520545314.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:54.843Z,1520545314.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:55.227Z,1520545315.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:55.246Z,1520545315.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:55.624Z,1520545315.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:55.646Z,1520545315.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:56.024Z,1520545316.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:56.046Z,1520545316.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:56.436Z,1520545316.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:56.452Z,1520545316.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:56.862Z,1520545316.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:56.885Z,1520545316.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:57.234Z,1520545317.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:57.254Z,1520545317.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:57.609Z,1520545317.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:57.643Z,1520545317.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:58.019Z,1520545318.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:58.055Z,1520545318.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:58.420Z,1520545318.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:58.463Z,1520545318.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:58.815Z,1520545318.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:58.831Z,1520545318.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:59.225Z,1520545319.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:59.240Z,1520545319.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:41:59.675Z,1520545319.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:41:59.691Z,1520545319.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:00.031Z,1520545320.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:00.075Z,1520545320.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:00.468Z,1520545320.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:00.501Z,1520545320.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:00.825Z,1520545320.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:00.846Z,1520545320.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:01.226Z,1520545321.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:01.241Z,1520545321.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:01.623Z,1520545321.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:01.668Z,1520545321.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:01.694Z,1520545321.694 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T21:42:02.027Z,1520545322.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:02.078Z,1520545322.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:02.433Z,1520545322.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:02.448Z,1520545322.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:02.833Z,1520545322.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:02.848Z,1520545322.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:03.234Z,1520545323.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:03.248Z,1520545323.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:03.620Z,1520545323.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:03.635Z,1520545323.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:04.023Z,1520545324.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:04.038Z,1520545324.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:04.419Z,1520545324.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:04.439Z,1520545324.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:04.827Z,1520545324.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:04.843Z,1520545324.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:05.223Z,1520545325.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:05.238Z,1520545325.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:05.633Z,1520545325.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:05.654Z,1520545325.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:06.029Z,1520545326.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:06.050Z,1520545326.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:06.432Z,1520545326.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:06.454Z,1520545326.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:06.827Z,1520545326.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:06.842Z,1520545326.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:07.220Z,1520545327.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:07.239Z,1520545327.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:07.623Z,1520545327.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:07.639Z,1520545327.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:08.024Z,1520545328.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:08.039Z,1520545328.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:08.433Z,1520545328.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:08.448Z,1520545328.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:08.833Z,1520545328.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:08.848Z,1520545328.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:09.234Z,1520545329.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:09.254Z,1520545329.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:09.617Z,1520545329.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:09.644Z,1520545329.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:10.027Z,1520545330.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:10.046Z,1520545330.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:10.428Z,1520545330.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:10.443Z,1520545330.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:10.827Z,1520545330.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:10.846Z,1520545330.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:11.226Z,1520545331.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:11.247Z,1520545331.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:11.633Z,1520545331.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:11.648Z,1520545331.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:12.029Z,1520545332.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:12.059Z,1520545332.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:12.432Z,1520545332.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:12.447Z,1520545332.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:12.828Z,1520545332.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:12.843Z,1520545332.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:13.227Z,1520545333.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:13.246Z,1520545333.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:13.627Z,1520545333.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:13.643Z,1520545333.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:14.027Z,1520545334.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:14.043Z,1520545334.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:14.433Z,1520545334.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:14.449Z,1520545334.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:14.833Z,1520545334.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:14.848Z,1520545334.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:15.233Z,1520545335.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:15.248Z,1520545335.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:15.621Z,1520545335.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:15.637Z,1520545335.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:16.023Z,1520545336.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:16.038Z,1520545336.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:16.425Z,1520545336.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:16.440Z,1520545336.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:16.823Z,1520545336.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:16.846Z,1520545336.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:17.219Z,1520545337.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:17.242Z,1520545337.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:17.634Z,1520545337.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:17.649Z,1520545337.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:18.030Z,1520545338.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:18.070Z,1520545338.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:18.433Z,1520545338.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:18.454Z,1520545338.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:18.828Z,1520545338.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:18.844Z,1520545338.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:19.224Z,1520545339.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:19.241Z,1520545339.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:19.627Z,1520545339.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:19.647Z,1520545339.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:20.028Z,1520545340.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:20.044Z,1520545340.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:20.432Z,1520545340.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:20.451Z,1520545340.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:20.834Z,1520545340.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:20.852Z,1520545340.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:21.233Z,1520545341.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:21.255Z,1520545341.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:21.617Z,1520545341.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:21.637Z,1520545341.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:22.019Z,1520545342.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:22.043Z,1520545342.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:22.423Z,1520545342.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:22.439Z,1520545342.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:22.827Z,1520545342.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:22.850Z,1520545342.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:23.223Z,1520545343.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:23.239Z,1520545343.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:23.633Z,1520545343.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:23.649Z,1520545343.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:24.032Z,1520545344.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:24.048Z,1520545344.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:24.433Z,1520545344.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:24.455Z,1520545344.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:24.827Z,1520545344.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:24.843Z,1520545344.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:25.227Z,1520545345.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:25.243Z,1520545345.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:25.627Z,1520545345.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:25.651Z,1520545345.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:26.027Z,1520545346.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:26.042Z,1520545346.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:26.432Z,1520545346.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:26.454Z,1520545346.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:26.833Z,1520545346.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:26.854Z,1520545346.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:27.232Z,1520545347.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:27.248Z,1520545347.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:27.620Z,1520545347.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:27.635Z,1520545347.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:28.019Z,1520545348.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:28.041Z,1520545348.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:28.417Z,1520545348.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:28.443Z,1520545348.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:28.819Z,1520545348.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:28.846Z,1520545348.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:29.215Z,1520545349.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:29.242Z,1520545349.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:29.638Z,1520545349.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:29.653Z,1520545349.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:30.029Z,1520545350.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:30.048Z,1520545350.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:30.434Z,1520545350.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:30.454Z,1520545350.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:30.811Z,1520545350.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:30.844Z,1520545350.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:31.219Z,1520545351.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:31.246Z,1520545351.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:31.615Z,1520545351.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:31.642Z,1520545351.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:32.015Z,1520545352.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:32.042Z,1520545352.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:32.438Z,1520545352.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:32.454Z,1520545352.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:32.835Z,1520545352.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:32.862Z,1520545352.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:33.238Z,1520545353.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:33.253Z,1520545353.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:33.613Z,1520545353.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:33.640Z,1520545353.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:34.015Z,1520545354.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:34.041Z,1520545354.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:37.134Z,1520545357.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:37.150Z,1520545357.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:37.246Z,1520545357.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:37.289Z,1520545357.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:37.613Z,1520545357.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:37.638Z,1520545357.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:38.013Z,1520545358.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:38.042Z,1520545358.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:38.413Z,1520545358.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:38.437Z,1520545358.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:38.800Z,1520545358.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:38.815Z,1520545358.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:39.200Z,1520545359.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:39.222Z,1520545359.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:39.596Z,1520545359.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:39.611Z,1520545359.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:39.999Z,1520545359.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:40.015Z,1520545360.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:40.417Z,1520545360.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:40.443Z,1520545360.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:40.805Z,1520545360.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:40.820Z,1520545360.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:41.209Z,1520545361.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:41.224Z,1520545361.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:41.605Z,1520545361.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:41.620Z,1520545361.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:41.995Z,1520545361.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:42.019Z,1520545362.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:42.417Z,1520545362.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:42.432Z,1520545362.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:42.813Z,1520545362.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:42.829Z,1520545362.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:43.209Z,1520545363.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:43.225Z,1520545363.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:43.603Z,1520545363.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:43.619Z,1520545363.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:44.007Z,1520545364.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:44.022Z,1520545364.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:44.403Z,1520545364.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:44.423Z,1520545364.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:44.812Z,1520545364.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:44.827Z,1520545364.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:45.213Z,1520545365.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:45.229Z,1520545365.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:45.608Z,1520545365.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:45.623Z,1520545365.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:46.006Z,1520545366.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:46.026Z,1520545366.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:46.413Z,1520545366.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:46.429Z,1520545366.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:46.813Z,1520545366.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:46.829Z,1520545366.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:47.213Z,1520545367.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:47.228Z,1520545367.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:47.605Z,1520545367.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:47.621Z,1520545367.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:48.007Z,1520545368.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:48.022Z,1520545368.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:48.412Z,1520545368.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:48.427Z,1520545368.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:48.813Z,1520545368.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:48.829Z,1520545368.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:49.212Z,1520545369.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:49.234Z,1520545369.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:49.609Z,1520545369.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:49.625Z,1520545369.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:50.008Z,1520545370.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:50.023Z,1520545370.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:50.413Z,1520545370.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:50.428Z,1520545370.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:50.813Z,1520545370.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:50.828Z,1520545370.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:51.213Z,1520545371.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:51.229Z,1520545371.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:51.600Z,1520545371.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:51.615Z,1520545371.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:51.997Z,1520545371.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:52.025Z,1520545372.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:52.418Z,1520545372.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:52.434Z,1520545372.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:52.817Z,1520545372.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:52.832Z,1520545372.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:53.215Z,1520545373.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:53.231Z,1520545373.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:53.610Z,1520545373.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:53.630Z,1520545373.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:54.008Z,1520545374.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:54.023Z,1520545374.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:54.418Z,1520545374.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:54.433Z,1520545374.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:54.818Z,1520545374.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:54.833Z,1520545374.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:55.217Z,1520545375.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:55.233Z,1520545375.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:55.603Z,1520545375.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:55.625Z,1520545375.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:56.004Z,1520545376.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:56.020Z,1520545376.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:56.414Z,1520545376.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:56.435Z,1520545376.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:56.816Z,1520545376.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:56.839Z,1520545376.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:57.218Z,1520545377.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:57.234Z,1520545377.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:57.591Z,1520545377.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:57.623Z,1520545377.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:58.006Z,1520545378.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:58.022Z,1520545378.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:58.412Z,1520545378.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:58.439Z,1520545378.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:58.820Z,1520545378.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:58.843Z,1520545378.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:59.218Z,1520545379.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:59.239Z,1520545379.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:42:59.608Z,1520545379.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:42:59.623Z,1520545379.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:00.007Z,1520545380.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:00.022Z,1520545380.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:00.413Z,1520545380.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:00.429Z,1520545380.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:00.820Z,1520545380.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:00.835Z,1520545380.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:01.209Z,1520545381.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:01.225Z,1520545381.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:01.595Z,1520545381.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:01.630Z,1520545381.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:02.008Z,1520545382.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:02.023Z,1520545382.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:02.417Z,1520545382.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:02.439Z,1520545382.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:02.820Z,1520545382.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:02.835Z,1520545382.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:03.218Z,1520545383.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:03.233Z,1520545383.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:03.608Z,1520545383.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:03.623Z,1520545383.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:03.994Z,1520545383.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:04.031Z,1520545384.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:04.418Z,1520545384.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:04.433Z,1520545384.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:04.820Z,1520545384.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:04.835Z,1520545384.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:05.217Z,1520545385.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:05.232Z,1520545385.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:05.591Z,1520545385.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:05.623Z,1520545385.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:06.007Z,1520545386.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:06.027Z,1520545386.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:06.413Z,1520545386.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:06.428Z,1520545386.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:06.818Z,1520545386.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:06.833Z,1520545386.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:07.217Z,1520545387.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:07.232Z,1520545387.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:07.595Z,1520545387.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:07.627Z,1520545387.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:07.995Z,1520545387.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:08.030Z,1520545388.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:08.417Z,1520545388.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:08.432Z,1520545388.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:08.818Z,1520545388.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:08.839Z,1520545388.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:09.218Z,1520545389.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:09.233Z,1520545389.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:09.608Z,1520545389.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:09.623Z,1520545389.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:09.995Z,1520545389.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:10.027Z,1520545390.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:10.418Z,1520545390.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:10.433Z,1520545390.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:10.820Z,1520545390.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:10.836Z,1520545390.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:11.217Z,1520545391.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:11.239Z,1520545391.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:11.593Z,1520545391.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:11.621Z,1520545391.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:12.007Z,1520545392.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:12.022Z,1520545392.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:12.413Z,1520545392.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:12.429Z,1520545392.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:12.813Z,1520545392.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:12.835Z,1520545392.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:13.217Z,1520545393.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:13.232Z,1520545393.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:13.604Z,1520545393.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:13.628Z,1520545393.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:13.998Z,1520545393.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:14.026Z,1520545394.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:14.417Z,1520545394.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:14.433Z,1520545394.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:14.817Z,1520545394.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:14.832Z,1520545394.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:15.212Z,1520545395.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:15.227Z,1520545395.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:15.599Z,1520545395.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:15.627Z,1520545395.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:15.994Z,1520545395.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:16.021Z,1520545396.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:16.418Z,1520545396.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:16.438Z,1520545396.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:16.817Z,1520545396.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:16.832Z,1520545396.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:17.214Z,1520545397.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:17.229Z,1520545397.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:17.595Z,1520545397.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:17.632Z,1520545397.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:17.999Z,1520545397.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:18.025Z,1520545398.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:18.415Z,1520545398.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:18.434Z,1520545398.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:18.822Z,1520545398.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:18.837Z,1520545398.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:19.221Z,1520545399.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:19.236Z,1520545399.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:19.599Z,1520545399.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:19.626Z,1520545399.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:19.994Z,1520545399.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:20.023Z,1520545400.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:20.418Z,1520545400.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:20.439Z,1520545400.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:20.821Z,1520545400.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:20.836Z,1520545400.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:21.218Z,1520545401.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:21.233Z,1520545401.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:21.594Z,1520545401.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:21.621Z,1520545401.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:21.994Z,1520545401.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:22.021Z,1520545402.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:22.411Z,1520545402.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:22.431Z,1520545402.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:22.821Z,1520545402.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:22.836Z,1520545402.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:23.217Z,1520545403.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:23.233Z,1520545403.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:23.591Z,1520545403.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:23.623Z,1520545403.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:23.999Z,1520545403.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:24.025Z,1520545404.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:24.413Z,1520545404.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:24.429Z,1520545404.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:24.817Z,1520545404.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:24.838Z,1520545404.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:25.218Z,1520545405.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:25.233Z,1520545405.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:25.595Z,1520545405.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:25.622Z,1520545405.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:26.012Z,1520545406.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:26.027Z,1520545406.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:26.417Z,1520545406.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:26.433Z,1520545406.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:26.817Z,1520545406.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:26.833Z,1520545406.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:27.212Z,1520545407.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:27.227Z,1520545407.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:27.594Z,1520545407.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:27.621Z,1520545407.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:27.995Z,1520545407.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:28.022Z,1520545408.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:28.412Z,1520545408.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:28.436Z,1520545408.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:28.821Z,1520545408.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:28.836Z,1520545408.836 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:28.836Z,1520545408.836 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 279
2018-03-08T21:43:28.836Z,1520545408.836 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T21:43:28.838Z,1520545408.838 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:28.838Z,1520545408.838 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 279
2018-03-08T21:43:28.838Z,1520545408.838 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T21:43:28.840Z,1520545408.840 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:28.840Z,1520545408.840 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 279
2018-03-08T21:43:28.840Z,1520545408.840 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T21:43:28.873Z,1520545408.873 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T21:43:28.874Z,1520545408.874 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T21:43:28.874Z,1520545408.874 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T21:43:29.225Z,1520545409.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:29.269Z,1520545409.269 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T21:43:29.269Z,1520545409.269 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 279
2018-03-08T21:43:29.269Z,1520545409.269 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T21:43:29.270Z,1520545409.270 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 279
2018-03-08T21:43:29.270Z,1520545409.270 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T21:43:29.270Z,1520545409.270 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 279
2018-03-08T21:43:29.595Z,1520545409.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:29.630Z,1520545409.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T21:43:29.631Z,1520545409.631 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:43:29.631Z,1520545409.631 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:43:29.631Z,1520545409.631 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T21:43:29.632Z,1520545409.632 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:43:29.632Z,1520545409.632 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:43:29.632Z,1520545409.632 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T21:43:29.633Z,1520545409.633 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:43:29.633Z,1520545409.633 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:43:29.999Z,1520545409.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:30.031Z,1520545410.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T21:43:30.032Z,1520545410.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:30.394Z,1520545410.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:30.430Z,1520545410.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T21:43:30.431Z,1520545410.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:30.803Z,1520545410.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:30.831Z,1520545410.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T21:43:30.831Z,1520545410.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:31.199Z,1520545411.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:31.230Z,1520545411.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T21:43:31.231Z,1520545411.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:31.618Z,1520545411.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:31.633Z,1520545411.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T21:43:31.634Z,1520545411.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:32.019Z,1520545412.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:32.035Z,1520545412.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T21:43:32.035Z,1520545412.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:32.422Z,1520545412.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:32.437Z,1520545412.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T21:43:32.437Z,1520545412.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:32.800Z,1520545412.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:32.835Z,1520545412.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T21:43:32.835Z,1520545412.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:33.196Z,1520545413.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:33.235Z,1520545413.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T21:43:33.236Z,1520545413.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:33.601Z,1520545413.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:33.628Z,1520545413.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T21:43:33.629Z,1520545413.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:34.024Z,1520545414.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:34.058Z,1520545414.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T21:43:34.059Z,1520545414.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:34.423Z,1520545414.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:34.453Z,1520545414.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T21:43:34.454Z,1520545414.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:37.533Z,1520545417.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:37.549Z,1520545417.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-03-08T21:43:37.549Z,1520545417.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:37.657Z,1520545417.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:37.698Z,1520545417.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-08T21:43:37.699Z,1520545417.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:38.027Z,1520545418.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:38.043Z,1520545418.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T21:43:38.044Z,1520545418.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:38.411Z,1520545418.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:38.438Z,1520545418.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T21:43:38.439Z,1520545418.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:38.810Z,1520545418.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:38.837Z,1520545418.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T21:43:38.838Z,1520545418.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:39.211Z,1520545419.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:39.243Z,1520545419.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T21:43:39.244Z,1520545419.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:39.630Z,1520545419.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:39.645Z,1520545419.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T21:43:39.646Z,1520545419.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:40.029Z,1520545420.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:40.044Z,1520545420.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T21:43:40.046Z,1520545420.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:40.429Z,1520545420.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:40.444Z,1520545420.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T21:43:40.445Z,1520545420.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:40.807Z,1520545420.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:40.834Z,1520545420.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T21:43:40.835Z,1520545420.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:41.207Z,1520545421.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:41.232Z,1520545421.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T21:43:41.233Z,1520545421.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:41.611Z,1520545421.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:41.643Z,1520545421.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T21:43:41.644Z,1520545421.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:42.011Z,1520545422.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:42.042Z,1520545422.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T21:43:42.043Z,1520545422.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:42.433Z,1520545422.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:42.454Z,1520545422.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T21:43:42.455Z,1520545422.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:42.833Z,1520545422.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:42.848Z,1520545422.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T21:43:42.849Z,1520545422.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:43.234Z,1520545423.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:43.248Z,1520545423.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T21:43:43.249Z,1520545423.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:43.607Z,1520545423.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:43.679Z,1520545423.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T21:43:43.693Z,1520545423.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:44.008Z,1520545424.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:44.038Z,1520545424.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T21:43:44.039Z,1520545424.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:44.407Z,1520545424.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:44.445Z,1520545424.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T21:43:44.446Z,1520545424.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:44.822Z,1520545424.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:44.845Z,1520545424.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T21:43:44.846Z,1520545424.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:45.231Z,1520545425.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:45.246Z,1520545425.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T21:43:45.247Z,1520545425.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:45.636Z,1520545425.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:45.651Z,1520545425.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T21:43:45.652Z,1520545425.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:46.035Z,1520545426.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:46.059Z,1520545426.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T21:43:46.060Z,1520545426.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:46.424Z,1520545426.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:46.464Z,1520545426.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T21:43:46.469Z,1520545426.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:46.815Z,1520545426.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:46.829Z,1520545426.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T21:43:46.830Z,1520545426.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:47.212Z,1520545427.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:47.227Z,1520545427.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T21:43:47.228Z,1520545427.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:47.639Z,1520545427.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:47.679Z,1520545427.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T21:43:47.680Z,1520545427.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:48.022Z,1520545428.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:48.064Z,1520545428.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T21:43:48.065Z,1520545428.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:48.427Z,1520545428.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:48.447Z,1520545428.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T21:43:48.448Z,1520545428.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:48.834Z,1520545428.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:48.855Z,1520545428.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:49.235Z,1520545429.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:49.250Z,1520545429.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:49.612Z,1520545429.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:49.639Z,1520545429.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:50.027Z,1520545430.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:50.047Z,1520545430.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:50.424Z,1520545430.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:50.439Z,1520545430.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:50.823Z,1520545430.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:50.847Z,1520545430.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:51.210Z,1520545431.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:51.247Z,1520545431.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:51.634Z,1520545431.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:51.649Z,1520545431.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:52.038Z,1520545432.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:52.054Z,1520545432.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:52.429Z,1520545432.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:52.444Z,1520545432.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:52.811Z,1520545432.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:52.843Z,1520545432.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:53.215Z,1520545433.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:53.241Z,1520545433.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:53.610Z,1520545433.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:53.642Z,1520545433.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:54.007Z,1520545434.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:54.044Z,1520545434.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:54.434Z,1520545434.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:54.449Z,1520545434.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:54.833Z,1520545434.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:54.848Z,1520545434.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:55.233Z,1520545435.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:55.248Z,1520545435.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:55.611Z,1520545435.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:55.643Z,1520545435.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:56.010Z,1520545436.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:56.043Z,1520545436.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:56.415Z,1520545436.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:56.447Z,1520545436.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:56.813Z,1520545436.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:56.848Z,1520545436.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:57.210Z,1520545437.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:57.246Z,1520545437.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:57.635Z,1520545437.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:57.650Z,1520545437.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:58.036Z,1520545438.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:58.058Z,1520545438.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:58.433Z,1520545438.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:58.449Z,1520545438.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:58.807Z,1520545438.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:58.822Z,1520545438.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:59.215Z,1520545439.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:59.250Z,1520545439.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:43:59.611Z,1520545439.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:43:59.647Z,1520545439.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:00.012Z,1520545440.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:00.027Z,1520545440.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:00.425Z,1520545440.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:00.449Z,1520545440.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:00.840Z,1520545440.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:00.862Z,1520545440.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:01.229Z,1520545441.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:01.253Z,1520545441.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:01.612Z,1520545441.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:01.627Z,1520545441.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:02.018Z,1520545442.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:02.054Z,1520545442.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:02.412Z,1520545442.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:02.427Z,1520545442.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:02.819Z,1520545442.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:02.835Z,1520545442.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:03.219Z,1520545443.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:03.238Z,1520545443.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:03.629Z,1520545443.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:03.644Z,1520545443.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:04.029Z,1520545444.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:04.061Z,1520545444.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:04.433Z,1520545444.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:04.468Z,1520545444.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:04.823Z,1520545444.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:04.838Z,1520545444.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:05.223Z,1520545445.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:05.238Z,1520545445.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:05.624Z,1520545445.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:05.639Z,1520545445.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:06.023Z,1520545446.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:06.038Z,1520545446.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:06.425Z,1520545446.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:06.441Z,1520545446.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:06.829Z,1520545446.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:06.844Z,1520545446.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:07.226Z,1520545447.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:07.241Z,1520545447.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:07.615Z,1520545447.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:07.639Z,1520545447.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:08.024Z,1520545448.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:08.039Z,1520545448.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:08.424Z,1520545448.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:08.439Z,1520545448.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:08.825Z,1520545448.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:08.841Z,1520545448.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:09.221Z,1520545449.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:09.236Z,1520545449.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:09.630Z,1520545449.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:09.645Z,1520545449.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:10.029Z,1520545450.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:10.044Z,1520545450.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:10.430Z,1520545450.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:10.450Z,1520545450.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:10.824Z,1520545450.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:10.839Z,1520545450.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:11.221Z,1520545451.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:11.237Z,1520545451.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:11.619Z,1520545451.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:11.639Z,1520545451.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:12.016Z,1520545452.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:12.031Z,1520545452.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:12.430Z,1520545452.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:12.446Z,1520545452.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:12.830Z,1520545452.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:12.846Z,1520545452.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:13.230Z,1520545453.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:13.245Z,1520545453.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:13.613Z,1520545453.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:13.632Z,1520545453.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:14.015Z,1520545454.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:14.037Z,1520545454.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:14.423Z,1520545454.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:14.439Z,1520545454.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:14.824Z,1520545454.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:14.839Z,1520545454.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:15.218Z,1520545455.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:15.238Z,1520545455.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:15.628Z,1520545455.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:15.644Z,1520545455.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:16.024Z,1520545456.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:16.040Z,1520545456.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:16.428Z,1520545456.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:16.451Z,1520545456.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:16.823Z,1520545456.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:16.838Z,1520545456.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:17.223Z,1520545457.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:17.239Z,1520545457.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:17.623Z,1520545457.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:17.639Z,1520545457.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:18.024Z,1520545458.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:18.039Z,1520545458.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:18.428Z,1520545458.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:18.450Z,1520545458.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:18.828Z,1520545458.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:18.843Z,1520545458.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:19.229Z,1520545459.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:19.243Z,1520545459.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:19.609Z,1520545459.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:19.633Z,1520545459.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:20.015Z,1520545460.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:20.042Z,1520545460.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:20.423Z,1520545460.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:20.438Z,1520545460.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:20.824Z,1520545460.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:20.839Z,1520545460.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:21.210Z,1520545461.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:21.243Z,1520545461.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:21.634Z,1520545461.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:21.649Z,1520545461.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:22.035Z,1520545462.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:22.055Z,1520545462.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:22.433Z,1520545462.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:22.448Z,1520545462.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:22.807Z,1520545462.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:22.878Z,1520545462.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:23.223Z,1520545463.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:23.242Z,1520545463.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:23.611Z,1520545463.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:23.639Z,1520545463.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:24.011Z,1520545464.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:24.047Z,1520545464.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:24.433Z,1520545464.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:24.449Z,1520545464.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:24.857Z,1520545464.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:24.879Z,1520545464.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:25.231Z,1520545465.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:25.257Z,1520545465.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:25.608Z,1520545465.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:25.649Z,1520545465.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:26.012Z,1520545466.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:26.042Z,1520545466.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:26.407Z,1520545466.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:26.443Z,1520545466.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:26.811Z,1520545466.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:26.843Z,1520545466.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:27.210Z,1520545467.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:27.237Z,1520545467.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:27.634Z,1520545467.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:27.649Z,1520545467.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:28.028Z,1520545468.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:28.051Z,1520545468.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:28.433Z,1520545468.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:28.448Z,1520545468.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:28.807Z,1520545468.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:28.841Z,1520545468.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:29.215Z,1520545469.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:29.241Z,1520545469.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:29.628Z,1520545469.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:29.643Z,1520545469.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:30.016Z,1520545470.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:30.042Z,1520545470.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:30.425Z,1520545470.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:30.441Z,1520545470.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:30.833Z,1520545470.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:30.848Z,1520545470.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:31.231Z,1520545471.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:31.254Z,1520545471.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:31.607Z,1520545471.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:31.634Z,1520545471.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:32.011Z,1520545472.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:32.038Z,1520545472.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:32.411Z,1520545472.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:32.426Z,1520545472.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:32.820Z,1520545472.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:32.851Z,1520545472.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:33.218Z,1520545473.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:33.255Z,1520545473.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:33.630Z,1520545473.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:33.662Z,1520545473.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:34.021Z,1520545474.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:34.036Z,1520545474.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:34.429Z,1520545474.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:34.462Z,1520545474.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:34.818Z,1520545474.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:34.833Z,1520545474.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:37.923Z,1520545477.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:37.939Z,1520545477.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:38.032Z,1520545478.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:38.066Z,1520545478.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:38.451Z,1520545478.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:38.470Z,1520545478.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:38.833Z,1520545478.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:38.864Z,1520545478.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:39.241Z,1520545479.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:39.265Z,1520545479.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:39.631Z,1520545479.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:39.645Z,1520545479.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:40.020Z,1520545480.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:40.035Z,1520545480.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:40.430Z,1520545480.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:40.466Z,1520545480.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:40.831Z,1520545480.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:40.846Z,1520545480.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:41.232Z,1520545481.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:41.247Z,1520545481.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:41.637Z,1520545481.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:41.669Z,1520545481.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:42.041Z,1520545482.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:42.056Z,1520545482.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:42.433Z,1520545482.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:42.449Z,1520545482.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:42.830Z,1520545482.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:42.845Z,1520545482.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:43.228Z,1520545483.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:43.255Z,1520545483.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:43.634Z,1520545483.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:43.654Z,1520545483.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:44.032Z,1520545484.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:44.048Z,1520545484.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:44.437Z,1520545484.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:44.452Z,1520545484.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:44.836Z,1520545484.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:44.859Z,1520545484.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:45.238Z,1520545485.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:45.253Z,1520545485.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:45.634Z,1520545485.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:45.649Z,1520545485.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:46.023Z,1520545486.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:46.042Z,1520545486.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:46.431Z,1520545486.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:46.446Z,1520545486.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:46.832Z,1520545486.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:46.847Z,1520545486.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:47.236Z,1520545487.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:47.258Z,1520545487.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:47.641Z,1520545487.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:47.663Z,1520545487.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:48.042Z,1520545488.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:48.056Z,1520545488.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:48.442Z,1520545488.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:48.457Z,1520545488.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:48.832Z,1520545488.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:48.847Z,1520545488.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:49.237Z,1520545489.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:49.252Z,1520545489.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:49.638Z,1520545489.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:49.658Z,1520545489.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:50.034Z,1520545490.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:50.049Z,1520545490.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:50.441Z,1520545490.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:50.456Z,1520545490.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:50.842Z,1520545490.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:50.857Z,1520545490.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:51.242Z,1520545491.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:51.257Z,1520545491.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:51.637Z,1520545491.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:51.652Z,1520545491.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:52.028Z,1520545492.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:52.051Z,1520545492.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:52.429Z,1520545492.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:52.454Z,1520545492.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:52.830Z,1520545492.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:52.846Z,1520545492.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:53.235Z,1520545493.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:53.251Z,1520545493.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:53.641Z,1520545493.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:53.663Z,1520545493.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:54.044Z,1520545494.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:54.060Z,1520545494.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:54.444Z,1520545494.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:54.467Z,1520545494.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:54.836Z,1520545494.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:54.851Z,1520545494.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:55.232Z,1520545495.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:55.247Z,1520545495.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:55.636Z,1520545495.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:55.651Z,1520545495.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:56.025Z,1520545496.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:56.057Z,1520545496.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:56.444Z,1520545496.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:56.460Z,1520545496.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:56.834Z,1520545496.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:56.862Z,1520545496.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:57.241Z,1520545497.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:57.263Z,1520545497.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:57.636Z,1520545497.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:57.651Z,1520545497.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:58.020Z,1520545498.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:58.050Z,1520545498.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:58.427Z,1520545498.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:58.449Z,1520545498.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:58.832Z,1520545498.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:58.847Z,1520545498.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:59.235Z,1520545499.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:59.254Z,1520545499.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:44:59.644Z,1520545499.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:44:59.660Z,1520545499.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:00.044Z,1520545500.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:00.059Z,1520545500.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:00.434Z,1520545500.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:00.461Z,1520545500.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:00.834Z,1520545500.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:00.850Z,1520545500.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:01.223Z,1520545501.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:01.250Z,1520545501.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:01.636Z,1520545501.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:01.658Z,1520545501.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:02.023Z,1520545502.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:02.055Z,1520545502.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:02.446Z,1520545502.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:02.461Z,1520545502.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:02.841Z,1520545502.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:02.857Z,1520545502.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:03.241Z,1520545503.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:03.257Z,1520545503.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:03.619Z,1520545503.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:03.658Z,1520545503.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:04.017Z,1520545504.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:04.055Z,1520545504.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:04.435Z,1520545504.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:04.454Z,1520545504.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:04.819Z,1520545504.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:04.851Z,1520545504.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:05.235Z,1520545505.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:05.250Z,1520545505.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:05.641Z,1520545505.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:05.657Z,1520545505.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:06.045Z,1520545506.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:06.066Z,1520545506.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:06.442Z,1520545506.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:06.463Z,1520545506.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:06.834Z,1520545506.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:06.850Z,1520545506.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:07.223Z,1520545507.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:07.255Z,1520545507.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:07.635Z,1520545507.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:07.651Z,1520545507.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:08.022Z,1520545508.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:08.054Z,1520545508.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:08.447Z,1520545508.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:08.462Z,1520545508.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:08.841Z,1520545508.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:08.857Z,1520545508.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:09.242Z,1520545509.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:09.257Z,1520545509.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:09.623Z,1520545509.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:09.650Z,1520545509.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:10.020Z,1520545510.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:10.059Z,1520545510.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:10.435Z,1520545510.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:10.455Z,1520545510.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:10.824Z,1520545510.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:10.850Z,1520545510.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:11.223Z,1520545511.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:11.250Z,1520545511.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:11.642Z,1520545511.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:11.657Z,1520545511.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:12.046Z,1520545512.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:12.061Z,1520545512.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:12.441Z,1520545512.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:12.457Z,1520545512.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:12.823Z,1520545512.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:12.855Z,1520545512.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:13.223Z,1520545513.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:13.264Z,1520545513.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:13.621Z,1520545513.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:13.654Z,1520545513.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:14.022Z,1520545514.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:14.059Z,1520545514.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:14.450Z,1520545514.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:14.466Z,1520545514.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:14.837Z,1520545514.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:14.855Z,1520545514.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:15.242Z,1520545515.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:15.257Z,1520545515.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:15.623Z,1520545515.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:15.651Z,1520545515.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:16.019Z,1520545516.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:16.043Z,1520545516.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:16.426Z,1520545516.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:16.453Z,1520545516.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:16.824Z,1520545516.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:16.860Z,1520545516.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:17.223Z,1520545517.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:17.254Z,1520545517.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:17.641Z,1520545517.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:17.657Z,1520545517.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:18.046Z,1520545518.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:18.067Z,1520545518.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:18.441Z,1520545518.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:18.457Z,1520545518.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:18.830Z,1520545518.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:18.857Z,1520545518.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:19.223Z,1520545519.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:19.255Z,1520545519.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:19.628Z,1520545519.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:19.658Z,1520545519.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:20.023Z,1520545520.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:20.055Z,1520545520.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:20.450Z,1520545520.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:20.466Z,1520545520.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:20.837Z,1520545520.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:20.875Z,1520545520.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:21.237Z,1520545521.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:21.264Z,1520545521.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:21.631Z,1520545521.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:21.663Z,1520545521.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:22.027Z,1520545522.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:22.046Z,1520545522.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:22.431Z,1520545522.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:22.450Z,1520545522.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:22.830Z,1520545522.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:22.845Z,1520545522.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:23.226Z,1520545523.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:23.241Z,1520545523.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:23.645Z,1520545523.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:23.676Z,1520545523.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:24.041Z,1520545524.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:24.056Z,1520545524.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:24.445Z,1520545524.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:24.480Z,1520545524.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:24.842Z,1520545524.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:24.857Z,1520545524.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:25.237Z,1520545525.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:25.252Z,1520545525.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:25.637Z,1520545525.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:25.652Z,1520545525.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:26.032Z,1520545526.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:26.047Z,1520545526.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:26.442Z,1520545526.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:26.462Z,1520545526.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:26.841Z,1520545526.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:26.862Z,1520545526.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:27.242Z,1520545527.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:27.257Z,1520545527.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:27.627Z,1520545527.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:27.650Z,1520545527.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:28.036Z,1520545528.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:28.051Z,1520545528.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:28.437Z,1520545528.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:28.452Z,1520545528.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:28.834Z,1520545528.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:28.854Z,1520545528.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:29.237Z,1520545529.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:29.253Z,1520545529.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:29.643Z,1520545529.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:29.658Z,1520545529.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:30.042Z,1520545530.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:30.057Z,1520545530.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:30.441Z,1520545530.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:30.456Z,1520545530.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:30.831Z,1520545530.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:30.854Z,1520545530.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:31.236Z,1520545531.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:31.252Z,1520545531.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:31.623Z,1520545531.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:31.658Z,1520545531.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:32.035Z,1520545532.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:32.051Z,1520545532.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:32.445Z,1520545532.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:32.461Z,1520545532.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:32.841Z,1520545532.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:32.857Z,1520545532.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:33.241Z,1520545533.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:33.256Z,1520545533.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:33.619Z,1520545533.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:33.655Z,1520545533.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:34.035Z,1520545534.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:34.054Z,1520545534.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:34.435Z,1520545534.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:34.454Z,1520545534.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:34.819Z,1520545534.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:34.855Z,1520545534.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:37.940Z,1520545537.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:37.956Z,1520545537.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:38.069Z,1520545538.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:38.110Z,1520545538.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:38.434Z,1520545538.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:38.450Z,1520545538.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:38.816Z,1520545538.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:38.847Z,1520545538.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:39.211Z,1520545539.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:39.243Z,1520545539.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:39.611Z,1520545539.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:39.627Z,1520545539.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:40.010Z,1520545540.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:40.025Z,1520545540.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:40.421Z,1520545540.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:40.457Z,1520545540.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:40.821Z,1520545540.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:40.836Z,1520545540.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:41.219Z,1520545541.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:41.261Z,1520545541.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:41.610Z,1520545541.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:41.627Z,1520545541.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:42.017Z,1520545542.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:42.033Z,1520545542.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:42.415Z,1520545542.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:42.431Z,1520545542.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:42.814Z,1520545542.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:42.833Z,1520545542.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:43.222Z,1520545543.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:43.239Z,1520545543.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:43.626Z,1520545543.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:43.658Z,1520545543.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:44.017Z,1520545544.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:44.032Z,1520545544.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:44.429Z,1520545544.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:44.454Z,1520545544.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:44.813Z,1520545544.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:44.869Z,1520545544.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:45.211Z,1520545545.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:45.230Z,1520545545.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:45.613Z,1520545545.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:45.628Z,1520545545.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:46.015Z,1520545546.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:46.032Z,1520545546.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:46.425Z,1520545546.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:46.457Z,1520545546.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:46.821Z,1520545546.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:46.836Z,1520545546.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:47.221Z,1520545547.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:47.242Z,1520545547.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:47.604Z,1520545547.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:47.628Z,1520545547.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:48.015Z,1520545548.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:48.035Z,1520545548.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:48.416Z,1520545548.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:48.432Z,1520545548.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:48.813Z,1520545548.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:48.828Z,1520545548.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:49.215Z,1520545549.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:49.230Z,1520545549.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:49.621Z,1520545549.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:49.643Z,1520545549.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:50.021Z,1520545550.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:50.036Z,1520545550.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:50.424Z,1520545550.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:50.446Z,1520545550.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:50.817Z,1520545550.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:50.833Z,1520545550.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:51.199Z,1520545551.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:51.230Z,1520545551.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:51.612Z,1520545551.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:51.627Z,1520545551.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:52.009Z,1520545552.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:52.031Z,1520545552.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:52.424Z,1520545552.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:52.446Z,1520545552.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:52.825Z,1520545552.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:52.840Z,1520545552.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:53.225Z,1520545553.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:53.246Z,1520545553.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:53.609Z,1520545553.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:53.628Z,1520545553.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:54.009Z,1520545554.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:54.037Z,1520545554.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:54.416Z,1520545554.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:54.432Z,1520545554.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:54.799Z,1520545554.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:54.831Z,1520545554.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:55.206Z,1520545555.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:55.232Z,1520545555.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:55.627Z,1520545555.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:55.642Z,1520545555.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:56.021Z,1520545556.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:56.036Z,1520545556.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:56.429Z,1520545556.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:56.453Z,1520545556.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:56.812Z,1520545556.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:56.827Z,1520545556.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:57.207Z,1520545557.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:57.222Z,1520545557.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:57.612Z,1520545557.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:57.628Z,1520545557.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:58.010Z,1520545558.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:58.026Z,1520545558.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:58.413Z,1520545558.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:58.429Z,1520545558.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:58.817Z,1520545558.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:58.832Z,1520545558.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:59.217Z,1520545559.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:59.233Z,1520545559.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:45:59.613Z,1520545559.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:45:59.628Z,1520545559.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:00.014Z,1520545560.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:00.029Z,1520545560.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:00.413Z,1520545560.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:00.428Z,1520545560.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:00.813Z,1520545560.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:00.829Z,1520545560.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:01.208Z,1520545561.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:01.246Z,1520545561.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:01.625Z,1520545561.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:01.658Z,1520545561.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:02.017Z,1520545562.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:02.032Z,1520545562.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:02.425Z,1520545562.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:02.457Z,1520545562.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:02.810Z,1520545562.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:02.833Z,1520545562.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:03.217Z,1520545563.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:03.232Z,1520545563.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:03.611Z,1520545563.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:03.632Z,1520545563.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:04.014Z,1520545564.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:04.029Z,1520545564.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:04.417Z,1520545564.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:04.434Z,1520545564.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:04.822Z,1520545564.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:04.858Z,1520545564.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:05.222Z,1520545565.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:05.243Z,1520545565.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:05.615Z,1520545565.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:05.638Z,1520545565.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:06.014Z,1520545566.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:06.030Z,1520545566.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:06.415Z,1520545566.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:06.431Z,1520545566.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:06.805Z,1520545566.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:06.830Z,1520545566.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:07.216Z,1520545567.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:07.236Z,1520545567.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:07.621Z,1520545567.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:07.638Z,1520545567.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:08.021Z,1520545568.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:08.036Z,1520545568.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:08.421Z,1520545568.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:08.437Z,1520545568.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:08.816Z,1520545568.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:08.830Z,1520545568.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:09.207Z,1520545569.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:09.223Z,1520545569.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:09.607Z,1520545569.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:09.630Z,1520545569.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:10.016Z,1520545570.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:10.031Z,1520545570.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:10.424Z,1520545570.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:10.439Z,1520545570.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:10.825Z,1520545570.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:10.840Z,1520545570.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:11.222Z,1520545571.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:11.237Z,1520545571.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:11.614Z,1520545571.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:11.629Z,1520545571.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:12.009Z,1520545572.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:12.037Z,1520545572.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:12.429Z,1520545572.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:12.444Z,1520545572.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:12.829Z,1520545572.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:12.844Z,1520545572.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:13.221Z,1520545573.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:13.237Z,1520545573.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:13.599Z,1520545573.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:13.635Z,1520545573.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:14.007Z,1520545574.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:14.038Z,1520545574.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:14.421Z,1520545574.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:14.437Z,1520545574.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:14.830Z,1520545574.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:14.845Z,1520545574.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:15.229Z,1520545575.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:15.250Z,1520545575.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:15.607Z,1520545575.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:15.633Z,1520545575.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:16.032Z,1520545576.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:16.049Z,1520545576.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:16.407Z,1520545576.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:16.433Z,1520545576.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:16.804Z,1520545576.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:16.839Z,1520545576.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:17.203Z,1520545577.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:17.218Z,1520545577.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:17.621Z,1520545577.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:17.647Z,1520545577.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:18.038Z,1520545578.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:18.058Z,1520545578.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:18.421Z,1520545578.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:18.448Z,1520545578.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:18.807Z,1520545578.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:18.823Z,1520545578.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:19.218Z,1520545579.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:19.248Z,1520545579.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:19.607Z,1520545579.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:19.622Z,1520545579.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:20.003Z,1520545580.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:20.018Z,1520545580.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:20.425Z,1520545580.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:20.454Z,1520545580.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:20.858Z,1520545580.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:20.897Z,1520545580.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:21.217Z,1520545581.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:21.253Z,1520545581.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:21.611Z,1520545581.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:21.650Z,1520545581.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:22.012Z,1520545582.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:22.027Z,1520545582.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:22.412Z,1520545582.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:22.427Z,1520545582.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:22.810Z,1520545582.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:22.825Z,1520545582.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:23.206Z,1520545583.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:23.232Z,1520545583.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:23.626Z,1520545583.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:23.654Z,1520545583.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:24.021Z,1520545584.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:24.036Z,1520545584.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:24.425Z,1520545584.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:24.440Z,1520545584.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:24.812Z,1520545584.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:24.827Z,1520545584.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:25.210Z,1520545585.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:25.225Z,1520545585.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:25.612Z,1520545585.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:25.627Z,1520545585.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:26.012Z,1520545586.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:26.027Z,1520545586.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:26.425Z,1520545586.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:26.461Z,1520545586.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:26.821Z,1520545586.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:26.836Z,1520545586.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:27.217Z,1520545587.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:27.233Z,1520545587.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:27.611Z,1520545587.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:27.627Z,1520545587.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:28.014Z,1520545588.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:28.029Z,1520545588.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:28.418Z,1520545588.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:28.434Z,1520545588.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:28.821Z,1520545588.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:28.836Z,1520545588.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:29.217Z,1520545589.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:29.232Z,1520545589.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:29.614Z,1520545589.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:29.634Z,1520545589.634 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:29.635Z,1520545589.635 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 280
2018-03-08T21:46:29.635Z,1520545589.635 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T21:46:29.637Z,1520545589.637 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:29.637Z,1520545589.637 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 280
2018-03-08T21:46:29.637Z,1520545589.637 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T21:46:29.638Z,1520545589.638 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:29.639Z,1520545589.639 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 280
2018-03-08T21:46:29.639Z,1520545589.639 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T21:46:29.671Z,1520545589.671 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T21:46:29.671Z,1520545589.671 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T21:46:29.672Z,1520545589.672 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T21:46:30.023Z,1520545590.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:30.048Z,1520545590.048 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T21:46:30.048Z,1520545590.048 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 280
2018-03-08T21:46:30.049Z,1520545590.049 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T21:46:30.049Z,1520545590.049 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 280
2018-03-08T21:46:30.049Z,1520545590.049 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T21:46:30.049Z,1520545590.049 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 280
2018-03-08T21:46:30.402Z,1520545590.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:30.429Z,1520545590.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T21:46:30.429Z,1520545590.429 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:46:30.430Z,1520545590.430 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:46:30.430Z,1520545590.430 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T21:46:30.430Z,1520545590.430 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:46:30.431Z,1520545590.431 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:46:30.431Z,1520545590.431 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T21:46:30.432Z,1520545590.432 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:46:30.432Z,1520545590.432 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:46:30.802Z,1520545590.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:30.838Z,1520545590.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T21:46:30.839Z,1520545590.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:31.203Z,1520545591.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:31.234Z,1520545591.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T21:46:31.235Z,1520545591.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:31.623Z,1520545591.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:31.637Z,1520545591.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T21:46:31.638Z,1520545591.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:32.029Z,1520545592.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:32.050Z,1520545592.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T21:46:32.051Z,1520545592.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:32.425Z,1520545592.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:32.440Z,1520545592.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T21:46:32.441Z,1520545592.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:32.799Z,1520545592.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:32.835Z,1520545592.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T21:46:32.836Z,1520545592.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:33.207Z,1520545593.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:33.238Z,1520545593.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T21:46:33.239Z,1520545593.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:33.603Z,1520545593.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:33.638Z,1520545593.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T21:46:33.639Z,1520545593.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:34.007Z,1520545594.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:34.039Z,1520545594.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T21:46:34.040Z,1520545594.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:34.043Z,1520545594.043 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T21:46:34.043Z,1520545594.043 [Default:CheckIn:C.Wait] Stopped
2018-03-08T21:46:34.043Z,1520545594.043 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T21:46:34.043Z,1520545594.043 [Default:CheckIn:D] Running Loop=1
2018-03-08T21:46:34.426Z,1520545594.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:34.440Z,1520545594.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T21:46:34.441Z,1520545594.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:34.445Z,1520545594.445 [Default:CheckIn:D] Stopped
2018-03-08T21:46:34.445Z,1520545594.445 [Default:CheckIn:E] Running Loop=1
2018-03-08T21:46:34.833Z,1520545594.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:34.848Z,1520545594.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T21:46:34.849Z,1520545594.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:34.852Z,1520545594.852 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 840.827344 min 
2018-03-08T21:46:34.853Z,1520545594.853 [Default:CheckIn:E] Stopped
2018-03-08T21:46:34.853Z,1520545594.853 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T21:46:34.853Z,1520545594.853 [Default:CheckIn] Stopped
2018-03-08T21:46:34.853Z,1520545594.853 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T21:46:34.853Z,1520545594.853 [Default:CheckIn](INFO): Running loop #82
2018-03-08T21:46:34.853Z,1520545594.853 [Default:CheckIn] Running Loop=82
2018-03-08T21:46:34.853Z,1520545594.853 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T21:46:34.853Z,1520545594.853 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T21:46:35.226Z,1520545595.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:35.247Z,1520545595.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T21:46:35.247Z,1520545595.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:38.338Z,1520545598.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:38.354Z,1520545598.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-03-08T21:46:38.355Z,1520545598.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:38.456Z,1520545598.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:38.494Z,1520545598.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-08T21:46:38.495Z,1520545598.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:38.845Z,1520545598.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:38.860Z,1520545598.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T21:46:38.861Z,1520545598.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:39.245Z,1520545599.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:39.259Z,1520545599.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T21:46:39.261Z,1520545599.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:39.645Z,1520545599.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:39.660Z,1520545599.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T21:46:39.661Z,1520545599.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:40.031Z,1520545600.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:40.054Z,1520545600.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T21:46:40.055Z,1520545600.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:40.437Z,1520545600.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:40.452Z,1520545600.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T21:46:40.453Z,1520545600.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:40.836Z,1520545600.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:40.851Z,1520545600.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T21:46:40.852Z,1520545600.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:41.230Z,1520545601.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:41.250Z,1520545601.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T21:46:41.251Z,1520545601.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:41.645Z,1520545601.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:41.660Z,1520545601.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T21:46:41.661Z,1520545601.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:42.046Z,1520545602.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:42.066Z,1520545602.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T21:46:42.067Z,1520545602.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:42.445Z,1520545602.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:42.460Z,1520545602.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T21:46:42.461Z,1520545602.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:42.841Z,1520545602.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:42.856Z,1520545602.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T21:46:42.857Z,1520545602.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:43.240Z,1520545603.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:43.255Z,1520545603.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T21:46:43.256Z,1520545603.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:43.637Z,1520545603.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:43.652Z,1520545603.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T21:46:43.653Z,1520545603.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:44.034Z,1520545604.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:44.049Z,1520545604.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T21:46:44.050Z,1520545604.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:44.449Z,1520545604.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:44.464Z,1520545604.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T21:46:44.465Z,1520545604.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:44.846Z,1520545604.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:44.861Z,1520545604.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T21:46:44.862Z,1520545604.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:45.246Z,1520545605.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:45.261Z,1520545605.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T21:46:45.262Z,1520545605.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:45.641Z,1520545605.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:45.656Z,1520545605.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T21:46:45.657Z,1520545605.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:46.031Z,1520545606.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:46.046Z,1520545606.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T21:46:46.047Z,1520545606.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:46.432Z,1520545606.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:46.448Z,1520545606.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T21:46:46.449Z,1520545606.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:46.832Z,1520545606.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:46.860Z,1520545606.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T21:46:46.865Z,1520545606.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:47.238Z,1520545607.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:47.254Z,1520545607.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T21:46:47.255Z,1520545607.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:47.647Z,1520545607.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:47.662Z,1520545607.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T21:46:47.663Z,1520545607.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:48.048Z,1520545608.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:48.067Z,1520545608.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T21:46:48.067Z,1520545608.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:48.448Z,1520545608.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:48.463Z,1520545608.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T21:46:48.465Z,1520545608.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:48.832Z,1520545608.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:48.856Z,1520545608.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T21:46:48.861Z,1520545608.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:49.239Z,1520545609.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:49.254Z,1520545609.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T21:46:49.255Z,1520545609.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:49.641Z,1520545609.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:49.655Z,1520545609.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:50.021Z,1520545610.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:50.059Z,1520545610.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:50.453Z,1520545610.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:50.475Z,1520545610.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:50.853Z,1520545610.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:50.868Z,1520545610.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:51.254Z,1520545611.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:51.269Z,1520545611.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:51.627Z,1520545611.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:51.654Z,1520545611.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:52.027Z,1520545612.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:52.053Z,1520545612.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:52.431Z,1520545612.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:52.458Z,1520545612.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:52.827Z,1520545612.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:52.854Z,1520545612.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:53.222Z,1520545613.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:53.258Z,1520545613.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:53.641Z,1520545613.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:53.661Z,1520545613.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:54.049Z,1520545614.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:54.064Z,1520545614.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:54.445Z,1520545614.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:54.466Z,1520545614.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:54.824Z,1520545614.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:54.852Z,1520545614.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:55.227Z,1520545615.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:55.258Z,1520545615.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:55.631Z,1520545615.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:55.662Z,1520545615.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:56.021Z,1520545616.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:56.036Z,1520545616.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:56.441Z,1520545616.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:56.479Z,1520545616.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:56.841Z,1520545616.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:56.866Z,1520545616.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:57.241Z,1520545617.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:57.267Z,1520545617.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:57.632Z,1520545617.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:57.647Z,1520545617.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:58.030Z,1520545618.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:58.045Z,1520545618.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:58.427Z,1520545618.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:58.443Z,1520545618.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:58.835Z,1520545618.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:58.850Z,1520545618.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:59.234Z,1520545619.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:59.249Z,1520545619.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:46:59.633Z,1520545619.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:46:59.649Z,1520545619.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:00.049Z,1520545620.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:00.074Z,1520545620.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:00.445Z,1520545620.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:00.478Z,1520545620.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:00.827Z,1520545620.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:00.843Z,1520545620.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:01.233Z,1520545621.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:01.248Z,1520545621.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:01.635Z,1520545621.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:01.650Z,1520545621.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:02.028Z,1520545622.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:02.044Z,1520545622.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:02.449Z,1520545622.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:02.473Z,1520545622.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:02.849Z,1520545622.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:02.875Z,1520545622.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:03.249Z,1520545623.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:03.275Z,1520545623.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:03.635Z,1520545623.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:03.650Z,1520545623.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:04.035Z,1520545624.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:04.054Z,1520545624.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:04.426Z,1520545624.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:04.442Z,1520545624.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:04.833Z,1520545624.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:04.854Z,1520545624.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:05.231Z,1520545625.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:05.246Z,1520545625.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:05.633Z,1520545625.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:05.649Z,1520545625.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:06.045Z,1520545626.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:06.073Z,1520545626.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:06.449Z,1520545626.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:06.464Z,1520545626.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:06.828Z,1520545626.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:06.848Z,1520545626.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:07.234Z,1520545627.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:07.249Z,1520545627.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:07.631Z,1520545627.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:07.646Z,1520545627.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:08.033Z,1520545628.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:08.049Z,1520545628.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:08.449Z,1520545628.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:08.464Z,1520545628.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:08.845Z,1520545628.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:08.860Z,1520545628.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:09.241Z,1520545629.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:09.256Z,1520545629.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:09.638Z,1520545629.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:09.653Z,1520545629.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:10.037Z,1520545630.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:10.052Z,1520545630.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:10.437Z,1520545630.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:10.453Z,1520545630.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:10.834Z,1520545630.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:10.862Z,1520545630.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:11.239Z,1520545631.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:11.258Z,1520545631.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:11.640Z,1520545631.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:11.662Z,1520545631.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:12.046Z,1520545632.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:12.066Z,1520545632.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:12.444Z,1520545632.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:12.466Z,1520545632.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:12.829Z,1520545632.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:12.853Z,1520545632.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:13.239Z,1520545633.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:13.258Z,1520545633.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:13.640Z,1520545633.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:13.655Z,1520545633.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:14.020Z,1520545634.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:14.052Z,1520545634.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:14.452Z,1520545634.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:14.474Z,1520545634.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:14.851Z,1520545634.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:14.867Z,1520545634.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:15.250Z,1520545635.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:15.265Z,1520545635.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:15.627Z,1520545635.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:15.659Z,1520545635.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:16.027Z,1520545636.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:16.059Z,1520545636.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:16.440Z,1520545636.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:16.455Z,1520545636.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:16.827Z,1520545636.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:16.859Z,1520545636.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:17.222Z,1520545637.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:17.249Z,1520545637.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:17.647Z,1520545637.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:17.662Z,1520545637.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:18.052Z,1520545638.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:18.074Z,1520545638.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:18.449Z,1520545638.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:18.470Z,1520545638.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:18.821Z,1520545638.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:18.855Z,1520545638.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:19.227Z,1520545639.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:19.255Z,1520545639.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:19.630Z,1520545639.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:19.658Z,1520545639.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:20.021Z,1520545640.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:20.036Z,1520545640.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:20.449Z,1520545640.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:20.469Z,1520545640.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:20.850Z,1520545640.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:20.865Z,1520545640.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:21.251Z,1520545641.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:21.266Z,1520545641.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:21.627Z,1520545641.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:21.663Z,1520545641.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:22.026Z,1520545642.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:22.062Z,1520545642.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:22.431Z,1520545642.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:22.463Z,1520545642.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:22.828Z,1520545642.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:22.843Z,1520545642.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:23.231Z,1520545643.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:23.246Z,1520545643.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:23.633Z,1520545643.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:23.649Z,1520545643.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:24.045Z,1520545644.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:24.076Z,1520545644.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:24.450Z,1520545644.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:24.482Z,1520545644.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:24.830Z,1520545644.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:24.845Z,1520545644.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:25.235Z,1520545645.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:25.250Z,1520545645.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:25.636Z,1520545645.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:25.658Z,1520545645.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:26.029Z,1520545646.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:26.046Z,1520545646.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:26.441Z,1520545646.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:26.479Z,1520545646.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:26.849Z,1520545646.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:26.864Z,1520545646.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:27.238Z,1520545647.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:27.254Z,1520545647.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:27.635Z,1520545647.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:27.651Z,1520545647.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:28.036Z,1520545648.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:28.058Z,1520545648.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:28.438Z,1520545648.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:28.453Z,1520545648.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:28.835Z,1520545648.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:28.850Z,1520545648.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:29.234Z,1520545649.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:29.250Z,1520545649.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:29.641Z,1520545649.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:29.656Z,1520545649.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:30.045Z,1520545650.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:30.060Z,1520545650.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:30.441Z,1520545650.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:30.462Z,1520545650.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:30.829Z,1520545650.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:30.844Z,1520545650.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:31.229Z,1520545651.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:31.259Z,1520545651.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:31.638Z,1520545651.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:31.653Z,1520545651.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:32.029Z,1520545652.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:32.049Z,1520545652.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:32.441Z,1520545652.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:32.457Z,1520545652.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:32.841Z,1520545652.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:32.862Z,1520545652.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:33.241Z,1520545653.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:33.256Z,1520545653.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:33.638Z,1520545653.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:33.659Z,1520545653.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:34.037Z,1520545654.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:34.053Z,1520545654.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:34.438Z,1520545654.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:34.453Z,1520545654.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:34.839Z,1520545654.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:34.855Z,1520545654.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:35.238Z,1520545655.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:35.253Z,1520545655.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:38.360Z,1520545658.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:38.385Z,1520545658.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:38.505Z,1520545658.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:38.539Z,1520545658.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:38.854Z,1520545658.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:38.883Z,1520545658.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:39.239Z,1520545659.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:39.253Z,1520545659.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:39.645Z,1520545659.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:39.660Z,1520545659.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:40.039Z,1520545660.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:40.062Z,1520545660.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:40.445Z,1520545660.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:40.460Z,1520545660.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:40.841Z,1520545660.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:40.857Z,1520545660.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:41.241Z,1520545661.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:41.257Z,1520545661.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:41.653Z,1520545661.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:41.727Z,1520545661.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:42.045Z,1520545662.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:42.103Z,1520545662.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:42.451Z,1520545662.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:42.466Z,1520545662.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:42.841Z,1520545662.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:42.870Z,1520545662.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:43.233Z,1520545663.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:43.272Z,1520545663.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:43.641Z,1520545663.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:43.674Z,1520545663.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:44.055Z,1520545664.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:44.069Z,1520545664.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:44.455Z,1520545664.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:44.487Z,1520545664.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:44.866Z,1520545664.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:44.887Z,1520545664.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:45.240Z,1520545665.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:45.276Z,1520545665.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:45.634Z,1520545665.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:45.681Z,1520545665.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:46.036Z,1520545666.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:46.070Z,1520545666.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:46.445Z,1520545666.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:46.471Z,1520545666.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:46.849Z,1520545666.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:46.878Z,1520545666.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:47.249Z,1520545667.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:47.272Z,1520545667.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:47.639Z,1520545667.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:47.677Z,1520545667.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:48.028Z,1520545668.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:48.043Z,1520545668.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:48.438Z,1520545668.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:48.473Z,1520545668.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:48.836Z,1520545668.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:48.851Z,1520545668.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:49.232Z,1520545669.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:49.247Z,1520545669.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:49.649Z,1520545669.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:49.672Z,1520545669.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:50.049Z,1520545670.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:50.073Z,1520545670.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:50.445Z,1520545670.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:50.470Z,1520545670.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:50.836Z,1520545670.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:50.851Z,1520545670.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:51.239Z,1520545671.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:51.253Z,1520545671.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:51.632Z,1520545671.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:51.647Z,1520545671.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:52.043Z,1520545672.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:52.078Z,1520545672.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:52.449Z,1520545672.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:52.464Z,1520545672.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:52.837Z,1520545672.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:52.853Z,1520545672.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:53.246Z,1520545673.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:53.261Z,1520545673.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:53.639Z,1520545673.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:53.654Z,1520545673.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:54.028Z,1520545674.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:54.051Z,1520545674.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:54.440Z,1520545674.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:54.455Z,1520545674.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:54.841Z,1520545674.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:54.855Z,1520545674.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:55.240Z,1520545675.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:55.256Z,1520545675.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:55.641Z,1520545675.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:55.657Z,1520545675.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:56.053Z,1520545676.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:56.085Z,1520545676.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:56.453Z,1520545676.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:56.483Z,1520545676.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:56.838Z,1520545676.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:56.853Z,1520545676.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:57.239Z,1520545677.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:57.254Z,1520545677.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:57.638Z,1520545677.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:57.665Z,1520545677.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:58.044Z,1520545678.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:58.059Z,1520545678.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:58.445Z,1520545678.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:58.460Z,1520545678.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:58.845Z,1520545678.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:58.866Z,1520545678.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:59.245Z,1520545679.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:59.260Z,1520545679.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:47:59.640Z,1520545679.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:47:59.655Z,1520545679.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:00.032Z,1520545680.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:00.057Z,1520545680.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:00.439Z,1520545680.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:00.455Z,1520545680.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:00.844Z,1520545680.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:00.859Z,1520545680.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:01.238Z,1520545681.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:01.266Z,1520545681.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:01.652Z,1520545681.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:01.668Z,1520545681.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:02.053Z,1520545682.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:02.070Z,1520545682.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:02.454Z,1520545682.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:02.475Z,1520545682.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:02.843Z,1520545682.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:02.863Z,1520545682.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:03.240Z,1520545683.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:03.255Z,1520545683.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:03.644Z,1520545683.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:03.660Z,1520545683.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:04.033Z,1520545684.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:04.066Z,1520545684.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:04.454Z,1520545684.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:04.469Z,1520545684.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:04.842Z,1520545684.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:04.870Z,1520545684.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:05.253Z,1520545685.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:05.269Z,1520545685.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:05.631Z,1520545685.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:05.663Z,1520545685.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:06.028Z,1520545686.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:06.062Z,1520545686.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:06.442Z,1520545686.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:06.463Z,1520545686.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:06.853Z,1520545686.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:06.897Z,1520545686.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:07.225Z,1520545687.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:07.263Z,1520545687.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:07.656Z,1520545687.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:07.671Z,1520545687.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:08.053Z,1520545688.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:08.074Z,1520545688.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:08.453Z,1520545688.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:08.468Z,1520545688.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:08.831Z,1520545688.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:08.857Z,1520545688.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:09.231Z,1520545689.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:09.259Z,1520545689.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:09.627Z,1520545689.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:09.658Z,1520545689.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:10.031Z,1520545690.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:10.056Z,1520545690.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:10.452Z,1520545690.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:10.482Z,1520545690.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:10.845Z,1520545690.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:10.866Z,1520545690.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:11.249Z,1520545691.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:11.278Z,1520545691.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:11.647Z,1520545691.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:11.673Z,1520545691.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:12.027Z,1520545692.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:12.051Z,1520545692.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:12.440Z,1520545692.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:12.462Z,1520545692.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:12.839Z,1520545692.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:12.854Z,1520545692.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:13.240Z,1520545693.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:13.255Z,1520545693.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:13.641Z,1520545693.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:13.657Z,1520545693.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:14.053Z,1520545694.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:14.068Z,1520545694.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:14.440Z,1520545694.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:14.455Z,1520545694.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:14.838Z,1520545694.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:14.853Z,1520545694.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:15.239Z,1520545695.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:15.254Z,1520545695.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:15.640Z,1520545695.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:15.655Z,1520545695.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:16.038Z,1520545696.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:16.053Z,1520545696.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:16.445Z,1520545696.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:16.461Z,1520545696.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:16.840Z,1520545696.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:16.855Z,1520545696.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:17.253Z,1520545697.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:17.268Z,1520545697.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:17.642Z,1520545697.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:17.657Z,1520545697.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:18.036Z,1520545698.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:18.058Z,1520545698.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:18.442Z,1520545698.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:18.457Z,1520545698.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:18.843Z,1520545698.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:18.858Z,1520545698.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:19.242Z,1520545699.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:19.262Z,1520545699.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:19.644Z,1520545699.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:19.659Z,1520545699.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:20.049Z,1520545700.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:20.064Z,1520545700.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:20.444Z,1520545700.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:20.459Z,1520545700.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:20.839Z,1520545700.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:20.854Z,1520545700.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:21.237Z,1520545701.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:21.265Z,1520545701.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:21.644Z,1520545701.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:21.659Z,1520545701.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:22.042Z,1520545702.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:22.062Z,1520545702.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:22.449Z,1520545702.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:22.464Z,1520545702.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:22.844Z,1520545702.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:22.860Z,1520545702.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:23.248Z,1520545703.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:23.271Z,1520545703.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:23.644Z,1520545703.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:23.660Z,1520545703.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:24.033Z,1520545704.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:24.064Z,1520545704.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:24.431Z,1520545704.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:24.463Z,1520545704.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:24.831Z,1520545704.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:24.866Z,1520545704.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:25.243Z,1520545705.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:25.258Z,1520545705.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:25.649Z,1520545705.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:25.664Z,1520545705.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:26.055Z,1520545706.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:26.070Z,1520545706.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:26.453Z,1520545706.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:26.468Z,1520545706.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:26.843Z,1520545706.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:26.862Z,1520545706.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:27.231Z,1520545707.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:27.259Z,1520545707.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:27.635Z,1520545707.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:27.662Z,1520545707.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:28.030Z,1520545708.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:28.057Z,1520545708.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:28.454Z,1520545708.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:28.470Z,1520545708.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:28.845Z,1520545708.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:28.869Z,1520545708.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:29.249Z,1520545709.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:29.264Z,1520545709.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:29.631Z,1520545709.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:29.659Z,1520545709.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:30.031Z,1520545710.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:30.062Z,1520545710.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:30.434Z,1520545710.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:30.461Z,1520545710.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:30.832Z,1520545710.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:30.864Z,1520545710.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:31.235Z,1520545711.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:31.261Z,1520545711.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:31.645Z,1520545711.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:31.668Z,1520545711.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:32.055Z,1520545712.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:32.070Z,1520545712.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:32.449Z,1520545712.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:32.465Z,1520545712.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:32.831Z,1520545712.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:32.863Z,1520545712.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:33.231Z,1520545713.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:33.270Z,1520545713.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:33.632Z,1520545713.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:33.663Z,1520545713.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:34.031Z,1520545714.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:34.067Z,1520545714.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:34.449Z,1520545714.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:34.482Z,1520545714.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:34.847Z,1520545714.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:34.890Z,1520545714.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:35.241Z,1520545715.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:35.269Z,1520545715.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:38.348Z,1520545718.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:38.375Z,1520545718.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:38.472Z,1520545718.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:38.515Z,1520545718.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:38.847Z,1520545718.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:38.876Z,1520545718.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:39.241Z,1520545719.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:39.266Z,1520545719.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:39.650Z,1520545719.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:39.680Z,1520545719.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:40.032Z,1520545720.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:40.047Z,1520545720.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:40.432Z,1520545720.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:40.447Z,1520545720.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:40.835Z,1520545720.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:40.851Z,1520545720.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:41.235Z,1520545721.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:41.250Z,1520545721.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:41.637Z,1520545721.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:41.652Z,1520545721.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:42.038Z,1520545722.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:42.058Z,1520545722.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:42.437Z,1520545722.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:42.454Z,1520545722.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:42.831Z,1520545722.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:42.846Z,1520545722.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:43.235Z,1520545723.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:43.250Z,1520545723.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:43.634Z,1520545723.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:43.654Z,1520545723.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:44.034Z,1520545724.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:44.049Z,1520545724.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:44.436Z,1520545724.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:44.451Z,1520545724.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:44.841Z,1520545724.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:44.856Z,1520545724.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:45.238Z,1520545725.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:45.253Z,1520545725.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:45.634Z,1520545725.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:45.649Z,1520545725.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:46.034Z,1520545726.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:46.049Z,1520545726.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:46.433Z,1520545726.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:46.448Z,1520545726.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:46.835Z,1520545726.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:46.854Z,1520545726.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:47.233Z,1520545727.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:47.249Z,1520545727.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:47.637Z,1520545727.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:47.652Z,1520545727.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:48.036Z,1520545728.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:48.051Z,1520545728.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:48.437Z,1520545728.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:48.452Z,1520545728.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:48.831Z,1520545728.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:48.846Z,1520545728.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:49.234Z,1520545729.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:49.249Z,1520545729.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:49.635Z,1520545729.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:49.654Z,1520545729.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:50.033Z,1520545730.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:50.048Z,1520545730.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:50.437Z,1520545730.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:50.453Z,1520545730.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:50.837Z,1520545730.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:50.852Z,1520545730.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:51.237Z,1520545731.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:51.258Z,1520545731.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:51.627Z,1520545731.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:51.642Z,1520545731.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:52.038Z,1520545732.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:52.059Z,1520545732.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:52.434Z,1520545732.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:52.449Z,1520545732.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:52.916Z,1520545732.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:52.934Z,1520545732.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:53.231Z,1520545733.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:53.246Z,1520545733.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:53.637Z,1520545733.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:53.652Z,1520545733.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:54.037Z,1520545734.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:54.052Z,1520545734.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:54.437Z,1520545734.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:54.453Z,1520545734.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:54.832Z,1520545734.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:54.847Z,1520545734.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:55.234Z,1520545735.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:55.249Z,1520545735.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:55.629Z,1520545735.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:55.657Z,1520545735.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:56.035Z,1520545736.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:56.050Z,1520545736.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:56.440Z,1520545736.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:56.455Z,1520545736.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:56.842Z,1520545736.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:56.871Z,1520545736.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:57.246Z,1520545737.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:57.261Z,1520545737.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:57.635Z,1520545737.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:57.650Z,1520545737.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:58.022Z,1520545738.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:58.055Z,1520545738.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:58.423Z,1520545738.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:58.451Z,1520545738.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:58.882Z,1520545738.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:58.906Z,1520545738.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:59.222Z,1520545739.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:59.249Z,1520545739.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:48:59.646Z,1520545739.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:48:59.661Z,1520545739.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:00.049Z,1520545740.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:00.064Z,1520545740.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:00.445Z,1520545740.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:00.460Z,1520545740.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:00.823Z,1520545740.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:00.850Z,1520545740.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:01.223Z,1520545741.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:01.249Z,1520545741.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:01.624Z,1520545741.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:01.656Z,1520545741.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:02.026Z,1520545742.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:02.054Z,1520545742.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:02.445Z,1520545742.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:02.461Z,1520545742.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:02.843Z,1520545742.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:02.863Z,1520545742.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:03.245Z,1520545743.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:03.260Z,1520545743.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:03.627Z,1520545743.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:03.658Z,1520545743.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:04.022Z,1520545744.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:04.055Z,1520545744.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:04.426Z,1520545744.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:04.460Z,1520545744.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:04.825Z,1520545744.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:04.856Z,1520545744.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:05.222Z,1520545745.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:05.259Z,1520545745.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:05.637Z,1520545745.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:05.666Z,1520545745.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:06.041Z,1520545746.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:06.068Z,1520545746.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:06.441Z,1520545746.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:06.468Z,1520545746.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:06.823Z,1520545746.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:06.837Z,1520545746.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:07.231Z,1520545747.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:07.265Z,1520545747.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:07.631Z,1520545747.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:07.663Z,1520545747.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:08.026Z,1520545748.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:08.041Z,1520545748.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:08.438Z,1520545748.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:08.469Z,1520545748.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:08.841Z,1520545748.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:08.864Z,1520545748.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:09.240Z,1520545749.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:09.268Z,1520545749.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:09.624Z,1520545749.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:09.639Z,1520545749.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:10.028Z,1520545750.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:10.043Z,1520545750.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:10.430Z,1520545750.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:10.446Z,1520545750.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:10.830Z,1520545750.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:10.851Z,1520545750.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:11.231Z,1520545751.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:11.336Z,1520545751.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:11.641Z,1520545751.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:11.673Z,1520545751.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:12.042Z,1520545752.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:12.069Z,1520545752.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:12.445Z,1520545752.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:12.477Z,1520545752.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:12.832Z,1520545752.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:12.847Z,1520545752.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:13.234Z,1520545753.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:13.249Z,1520545753.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:13.633Z,1520545753.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:13.648Z,1520545753.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:14.033Z,1520545754.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:14.048Z,1520545754.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:14.441Z,1520545754.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:14.472Z,1520545754.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:14.845Z,1520545754.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:14.860Z,1520545754.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:15.237Z,1520545755.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:15.258Z,1520545755.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:15.624Z,1520545755.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:15.648Z,1520545755.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:16.037Z,1520545756.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:16.052Z,1520545756.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:16.434Z,1520545756.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:16.449Z,1520545756.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:16.837Z,1520545756.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:16.853Z,1520545756.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:17.235Z,1520545757.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:17.259Z,1520545757.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:17.642Z,1520545757.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:17.657Z,1520545757.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:18.038Z,1520545758.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:18.074Z,1520545758.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:18.438Z,1520545758.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:18.470Z,1520545758.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:18.827Z,1520545758.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:18.869Z,1520545758.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:19.220Z,1520545759.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:19.235Z,1520545759.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:19.627Z,1520545759.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:19.643Z,1520545759.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:20.026Z,1520545760.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:20.042Z,1520545760.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:20.441Z,1520545760.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:20.475Z,1520545760.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:20.849Z,1520545760.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:20.876Z,1520545760.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:21.240Z,1520545761.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:21.276Z,1520545761.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:21.623Z,1520545761.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:21.638Z,1520545761.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:22.030Z,1520545762.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:22.051Z,1520545762.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:22.430Z,1520545762.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:22.445Z,1520545762.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:22.829Z,1520545762.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:22.844Z,1520545762.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:23.227Z,1520545763.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:23.247Z,1520545763.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:23.645Z,1520545763.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:23.677Z,1520545763.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:24.029Z,1520545764.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:24.045Z,1520545764.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:24.445Z,1520545764.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:24.476Z,1520545764.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:24.831Z,1520545764.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:24.846Z,1520545764.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:25.228Z,1520545765.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:25.243Z,1520545765.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:25.633Z,1520545765.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:25.648Z,1520545765.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:26.030Z,1520545766.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:26.045Z,1520545766.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:26.445Z,1520545766.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:26.475Z,1520545766.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:26.841Z,1520545766.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:26.873Z,1520545766.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:27.241Z,1520545767.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:27.273Z,1520545767.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:27.624Z,1520545767.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:27.648Z,1520545767.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:28.032Z,1520545768.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:28.047Z,1520545768.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:28.431Z,1520545768.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:28.446Z,1520545768.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:28.832Z,1520545768.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:28.847Z,1520545768.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:29.230Z,1520545769.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:29.245Z,1520545769.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:29.644Z,1520545769.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:29.659Z,1520545769.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:30.036Z,1520545770.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:30.055Z,1520545770.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:30.437Z,1520545770.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:30.453Z,1520545770.453 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:30.453Z,1520545770.453 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 281
2018-03-08T21:49:30.453Z,1520545770.453 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T21:49:30.454Z,1520545770.454 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:30.455Z,1520545770.455 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 281
2018-03-08T21:49:30.455Z,1520545770.455 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T21:49:30.457Z,1520545770.457 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:30.457Z,1520545770.457 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 281
2018-03-08T21:49:30.457Z,1520545770.457 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T21:49:30.485Z,1520545770.485 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T21:49:30.485Z,1520545770.485 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T21:49:30.485Z,1520545770.485 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T21:49:30.831Z,1520545770.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:30.856Z,1520545770.856 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T21:49:30.856Z,1520545770.856 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 281
2018-03-08T21:49:30.857Z,1520545770.857 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T21:49:30.857Z,1520545770.857 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 281
2018-03-08T21:49:30.857Z,1520545770.857 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T21:49:30.857Z,1520545770.857 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 281
2018-03-08T21:49:31.229Z,1520545771.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:31.248Z,1520545771.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T21:49:31.248Z,1520545771.248 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:49:31.249Z,1520545771.249 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:49:31.249Z,1520545771.249 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T21:49:31.249Z,1520545771.249 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:49:31.250Z,1520545771.250 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:49:31.250Z,1520545771.250 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T21:49:31.250Z,1520545771.250 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:49:31.251Z,1520545771.251 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:49:31.629Z,1520545771.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:31.650Z,1520545771.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T21:49:31.651Z,1520545771.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:32.031Z,1520545772.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:32.054Z,1520545772.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T21:49:32.055Z,1520545772.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:32.445Z,1520545772.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:32.460Z,1520545772.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T21:49:32.461Z,1520545772.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:32.844Z,1520545772.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:32.866Z,1520545772.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T21:49:32.867Z,1520545772.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:33.245Z,1520545773.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:33.259Z,1520545773.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T21:49:33.260Z,1520545773.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:33.620Z,1520545773.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:33.655Z,1520545773.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T21:49:33.656Z,1520545773.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:34.030Z,1520545774.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:34.050Z,1520545774.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T21:49:34.051Z,1520545774.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:34.432Z,1520545774.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:34.447Z,1520545774.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T21:49:34.448Z,1520545774.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:34.836Z,1520545774.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:34.851Z,1520545774.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T21:49:34.851Z,1520545774.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:35.231Z,1520545775.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:35.250Z,1520545775.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T21:49:35.251Z,1520545775.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:35.644Z,1520545775.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:35.659Z,1520545775.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T21:49:35.660Z,1520545775.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:38.757Z,1520545778.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:38.772Z,1520545778.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-03-08T21:49:38.789Z,1520545778.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:38.891Z,1520545778.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:38.939Z,1520545778.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-08T21:49:38.939Z,1520545778.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:39.259Z,1520545779.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:39.274Z,1520545779.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T21:49:39.275Z,1520545779.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:39.649Z,1520545779.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:39.664Z,1520545779.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T21:49:39.665Z,1520545779.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:40.054Z,1520545780.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:40.074Z,1520545780.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T21:49:40.075Z,1520545780.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:40.466Z,1520545780.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:40.480Z,1520545780.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T21:49:40.503Z,1520545780.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:40.853Z,1520545780.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:40.868Z,1520545780.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T21:49:40.869Z,1520545780.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:41.269Z,1520545781.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:41.309Z,1520545781.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T21:49:41.310Z,1520545781.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:41.653Z,1520545781.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:41.680Z,1520545781.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T21:49:41.704Z,1520545781.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:42.048Z,1520545782.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:42.091Z,1520545782.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T21:49:42.092Z,1520545782.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:42.457Z,1520545782.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:42.480Z,1520545782.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T21:49:42.485Z,1520545782.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:42.858Z,1520545782.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:42.911Z,1520545782.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T21:49:42.912Z,1520545782.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:43.244Z,1520545783.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:43.273Z,1520545783.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T21:49:43.274Z,1520545783.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:43.672Z,1520545783.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:43.702Z,1520545783.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-08T21:49:43.703Z,1520545783.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:44.075Z,1520545784.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:44.090Z,1520545784.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T21:49:44.091Z,1520545784.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:44.465Z,1520545784.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:44.486Z,1520545784.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T21:49:44.487Z,1520545784.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:44.858Z,1520545784.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:44.881Z,1520545784.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T21:49:44.882Z,1520545784.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:45.268Z,1520545785.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:45.288Z,1520545785.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T21:49:45.290Z,1520545785.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:45.660Z,1520545785.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:45.675Z,1520545785.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T21:49:45.676Z,1520545785.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:46.062Z,1520545786.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:46.077Z,1520545786.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T21:49:46.078Z,1520545786.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:46.470Z,1520545786.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:46.484Z,1520545786.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T21:49:46.485Z,1520545786.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:46.865Z,1520545786.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:46.880Z,1520545786.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T21:49:46.881Z,1520545786.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:47.265Z,1520545787.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:47.280Z,1520545787.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T21:49:47.281Z,1520545787.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:47.659Z,1520545787.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:47.674Z,1520545787.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T21:49:47.675Z,1520545787.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:48.044Z,1520545788.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:48.082Z,1520545788.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T21:49:48.083Z,1520545788.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:48.447Z,1520545788.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:48.482Z,1520545788.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T21:49:48.483Z,1520545788.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:48.852Z,1520545788.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:48.879Z,1520545788.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T21:49:48.880Z,1520545788.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:49.251Z,1520545789.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:49.276Z,1520545789.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T21:49:49.277Z,1520545789.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:49.665Z,1520545789.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:49.684Z,1520545789.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T21:49:49.685Z,1520545789.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:50.071Z,1520545790.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:50.085Z,1520545790.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T21:49:50.086Z,1520545790.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:50.453Z,1520545790.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:50.491Z,1520545790.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:50.851Z,1520545790.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:50.883Z,1520545790.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:51.250Z,1520545791.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:51.283Z,1520545791.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:51.652Z,1520545791.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:51.683Z,1520545791.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:52.047Z,1520545792.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:52.074Z,1520545792.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:52.461Z,1520545792.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:52.488Z,1520545792.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:52.858Z,1520545792.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:52.884Z,1520545792.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:53.257Z,1520545793.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:53.291Z,1520545793.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:53.647Z,1520545793.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:53.662Z,1520545793.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:54.044Z,1520545794.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:54.059Z,1520545794.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:54.451Z,1520545794.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:54.486Z,1520545794.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:54.855Z,1520545794.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:54.871Z,1520545794.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:55.249Z,1520545795.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:55.270Z,1520545795.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:55.665Z,1520545795.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:55.700Z,1520545795.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:56.069Z,1520545796.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:56.102Z,1520545796.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:56.458Z,1520545796.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:56.479Z,1520545796.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:56.857Z,1520545796.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:56.874Z,1520545796.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:57.256Z,1520545797.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:57.271Z,1520545797.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:57.659Z,1520545797.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:57.674Z,1520545797.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:58.054Z,1520545798.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:58.070Z,1520545798.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:58.462Z,1520545798.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:58.477Z,1520545798.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:58.858Z,1520545798.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:58.874Z,1520545798.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:59.270Z,1520545799.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:59.302Z,1520545799.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:49:59.659Z,1520545799.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:49:59.675Z,1520545799.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:00.053Z,1520545800.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:00.068Z,1520545800.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:00.449Z,1520545800.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:00.479Z,1520545800.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:00.860Z,1520545800.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:00.875Z,1520545800.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:01.258Z,1520545801.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:01.279Z,1520545801.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:01.664Z,1520545801.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:01.687Z,1520545801.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:02.065Z,1520545802.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:02.080Z,1520545802.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:02.464Z,1520545802.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:02.479Z,1520545802.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:02.858Z,1520545802.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:02.874Z,1520545802.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:03.255Z,1520545803.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:03.278Z,1520545803.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:03.660Z,1520545803.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:03.675Z,1520545803.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:04.055Z,1520545804.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:04.070Z,1520545804.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:04.465Z,1520545804.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:04.481Z,1520545804.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:04.864Z,1520545804.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:04.880Z,1520545804.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:05.264Z,1520545805.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:05.279Z,1520545805.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:05.659Z,1520545805.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:05.674Z,1520545805.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:06.048Z,1520545806.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:06.075Z,1520545806.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:06.459Z,1520545806.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:06.482Z,1520545806.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:06.860Z,1520545806.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:06.875Z,1520545806.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:07.259Z,1520545807.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:07.279Z,1520545807.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:07.665Z,1520545807.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:07.686Z,1520545807.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:08.068Z,1520545808.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:08.083Z,1520545808.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:08.469Z,1520545808.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:08.484Z,1520545808.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:08.855Z,1520545808.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:08.874Z,1520545808.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:09.257Z,1520545809.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:09.272Z,1520545809.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:09.660Z,1520545809.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:09.682Z,1520545809.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:10.059Z,1520545810.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:10.074Z,1520545810.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:10.468Z,1520545810.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:10.484Z,1520545810.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:10.864Z,1520545810.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:10.880Z,1520545810.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:11.268Z,1520545811.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:11.290Z,1520545811.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:11.648Z,1520545811.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:11.663Z,1520545811.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:12.047Z,1520545812.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:12.062Z,1520545812.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:12.448Z,1520545812.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:12.470Z,1520545812.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:12.851Z,1520545812.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:12.866Z,1520545812.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:13.250Z,1520545813.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:13.266Z,1520545813.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:13.657Z,1520545813.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:13.672Z,1520545813.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:14.061Z,1520545814.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:14.076Z,1520545814.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:14.521Z,1520545814.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:14.538Z,1520545814.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:14.848Z,1520545814.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:14.870Z,1520545814.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:15.248Z,1520545815.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:15.270Z,1520545815.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:15.647Z,1520545815.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:15.666Z,1520545815.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:16.048Z,1520545816.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:16.064Z,1520545816.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:16.461Z,1520545816.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:16.502Z,1520545816.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:16.858Z,1520545816.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:16.883Z,1520545816.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:17.264Z,1520545817.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:17.279Z,1520545817.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:17.664Z,1520545817.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:17.679Z,1520545817.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:18.044Z,1520545818.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:18.079Z,1520545818.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:18.455Z,1520545818.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:18.474Z,1520545818.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:18.858Z,1520545818.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:18.873Z,1520545818.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:19.255Z,1520545819.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:19.274Z,1520545819.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:19.665Z,1520545819.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:19.686Z,1520545819.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:20.069Z,1520545820.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:20.084Z,1520545820.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:20.468Z,1520545820.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:20.483Z,1520545820.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:20.859Z,1520545820.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:20.878Z,1520545820.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:21.259Z,1520545821.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:21.275Z,1520545821.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:21.660Z,1520545821.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:21.676Z,1520545821.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:22.053Z,1520545822.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:22.081Z,1520545822.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:22.473Z,1520545822.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:22.488Z,1520545822.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:22.861Z,1520545822.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:22.885Z,1520545822.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:23.265Z,1520545823.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:23.280Z,1520545823.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:23.648Z,1520545823.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:23.680Z,1520545823.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:24.044Z,1520545824.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:24.071Z,1520545824.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:24.450Z,1520545824.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:24.482Z,1520545824.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:24.848Z,1520545824.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:24.879Z,1520545824.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:25.251Z,1520545825.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:25.286Z,1520545825.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:25.658Z,1520545825.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:25.685Z,1520545825.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:26.061Z,1520545826.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:26.099Z,1520545826.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:26.465Z,1520545826.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:26.489Z,1520545826.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:26.852Z,1520545826.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:26.890Z,1520545826.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:27.248Z,1520545827.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:27.263Z,1520545827.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:27.655Z,1520545827.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:27.672Z,1520545827.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:28.053Z,1520545828.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:28.069Z,1520545828.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:28.464Z,1520545828.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:28.480Z,1520545828.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:28.839Z,1520545828.839 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T21:50:28.839Z,1520545828.839 [NAL9602] Data Fault, FailCount= 3
2018-03-08T21:50:28.839Z,1520545828.839 [NAL9602](ERROR): Data Fault
2018-03-08T21:50:28.856Z,1520545828.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:28.872Z,1520545828.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:28.905Z,1520545828.905 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T21:50:29.230Z,1520545829.230 [NAL9602](INFO): Powering down
2018-03-08T21:50:29.249Z,1520545829.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:29.278Z,1520545829.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:29.657Z,1520545829.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:29.678Z,1520545829.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:30.058Z,1520545830.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:30.074Z,1520545830.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:30.087Z,1520545830.087 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T21:50:30.087Z,1520545830.087 [NAL9602] No Fault, FailCount= 3
2018-03-08T21:50:30.447Z,1520545830.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:30.478Z,1520545830.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:30.858Z,1520545830.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:30.878Z,1520545830.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:31.242Z,1520545831.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:31.274Z,1520545831.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:31.650Z,1520545831.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:31.676Z,1520545831.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:32.051Z,1520545832.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:32.078Z,1520545832.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:32.442Z,1520545832.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:32.474Z,1520545832.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:32.850Z,1520545832.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:32.877Z,1520545832.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:33.250Z,1520545833.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:33.279Z,1520545833.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:33.647Z,1520545833.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:33.682Z,1520545833.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:34.051Z,1520545834.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:34.083Z,1520545834.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:34.445Z,1520545834.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:34.460Z,1520545834.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:34.847Z,1520545834.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:34.863Z,1520545834.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:35.252Z,1520545835.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:35.267Z,1520545835.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:35.644Z,1520545835.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:35.660Z,1520545835.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:38.753Z,1520545838.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:38.768Z,1520545838.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:38.879Z,1520545838.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:38.914Z,1520545838.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:39.250Z,1520545839.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:39.265Z,1520545839.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:39.643Z,1520545839.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:39.658Z,1520545839.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:40.043Z,1520545840.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:40.059Z,1520545840.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:40.445Z,1520545840.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:40.460Z,1520545840.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:40.847Z,1520545840.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:40.862Z,1520545840.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:41.243Z,1520545841.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:41.258Z,1520545841.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:41.645Z,1520545841.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:41.660Z,1520545841.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:42.047Z,1520545842.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:42.063Z,1520545842.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:42.443Z,1520545842.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:42.458Z,1520545842.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:42.843Z,1520545842.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:42.858Z,1520545842.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:43.247Z,1520545843.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:43.262Z,1520545843.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:43.640Z,1520545843.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:43.655Z,1520545843.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:44.045Z,1520545844.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:44.060Z,1520545844.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:44.447Z,1520545844.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:44.462Z,1520545844.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:44.840Z,1520545844.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:44.856Z,1520545844.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:45.247Z,1520545845.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:45.262Z,1520545845.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:45.643Z,1520545845.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:45.658Z,1520545845.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:46.039Z,1520545846.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:46.055Z,1520545846.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:46.445Z,1520545846.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:46.460Z,1520545846.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:46.847Z,1520545846.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:46.863Z,1520545846.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:47.249Z,1520545847.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:47.340Z,1520545847.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:47.645Z,1520545847.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:47.660Z,1520545847.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:48.047Z,1520545848.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:48.062Z,1520545848.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:48.443Z,1520545848.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:48.459Z,1520545848.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:48.845Z,1520545848.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:48.860Z,1520545848.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:49.247Z,1520545849.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:49.262Z,1520545849.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:49.640Z,1520545849.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:49.656Z,1520545849.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:50.047Z,1520545850.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:50.061Z,1520545850.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:50.443Z,1520545850.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:50.458Z,1520545850.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:50.843Z,1520545850.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:50.858Z,1520545850.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:51.245Z,1520545851.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:51.260Z,1520545851.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:51.647Z,1520545851.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:51.663Z,1520545851.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:52.040Z,1520545852.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:52.056Z,1520545852.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:52.447Z,1520545852.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:52.462Z,1520545852.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:52.843Z,1520545852.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:52.858Z,1520545852.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:53.243Z,1520545853.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:53.258Z,1520545853.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:53.647Z,1520545853.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:53.662Z,1520545853.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:54.043Z,1520545854.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:54.072Z,1520545854.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:54.444Z,1520545854.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:54.459Z,1520545854.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:54.845Z,1520545854.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:54.860Z,1520545854.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:55.248Z,1520545855.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:55.263Z,1520545855.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:55.640Z,1520545855.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:55.655Z,1520545855.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:56.045Z,1520545856.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:56.060Z,1520545856.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:56.447Z,1520545856.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:56.463Z,1520545856.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:56.840Z,1520545856.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:56.855Z,1520545856.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:57.247Z,1520545857.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:57.262Z,1520545857.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:57.643Z,1520545857.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:57.662Z,1520545857.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:58.040Z,1520545858.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:58.055Z,1520545858.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:58.445Z,1520545858.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:58.460Z,1520545858.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:58.843Z,1520545858.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:58.867Z,1520545858.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:59.245Z,1520545859.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:59.260Z,1520545859.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:50:59.622Z,1520545859.622 [NAL9602](INFO): Powering up NAL9602
2018-03-08T21:50:59.646Z,1520545859.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:50:59.672Z,1520545859.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:00.041Z,1520545860.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:00.072Z,1520545860.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:00.450Z,1520545860.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:00.465Z,1520545860.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:00.846Z,1520545860.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:00.866Z,1520545860.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:01.251Z,1520545861.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:01.267Z,1520545861.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:01.634Z,1520545861.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:01.667Z,1520545861.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:02.047Z,1520545862.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:02.061Z,1520545862.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:02.450Z,1520545862.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:02.466Z,1520545862.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:02.847Z,1520545862.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:02.862Z,1520545862.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:03.245Z,1520545863.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:03.267Z,1520545863.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:03.650Z,1520545863.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:03.665Z,1520545863.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:04.047Z,1520545864.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:04.063Z,1520545864.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:04.446Z,1520545864.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:04.466Z,1520545864.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:04.850Z,1520545864.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:04.865Z,1520545864.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:05.246Z,1520545865.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:05.262Z,1520545865.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:05.645Z,1520545865.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:05.666Z,1520545865.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:06.051Z,1520545866.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:06.067Z,1520545866.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:06.446Z,1520545866.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:06.461Z,1520545866.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:06.845Z,1520545866.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:06.866Z,1520545866.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:07.250Z,1520545867.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:07.270Z,1520545867.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:07.650Z,1520545867.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:07.665Z,1520545867.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:08.045Z,1520545868.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:08.067Z,1520545868.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:08.450Z,1520545868.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:08.470Z,1520545868.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:08.847Z,1520545868.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:08.863Z,1520545868.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:09.245Z,1520545869.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:09.266Z,1520545869.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:09.650Z,1520545869.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:09.671Z,1520545869.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:10.057Z,1520545870.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:10.078Z,1520545870.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:10.422Z,1520545870.422 [NAL9602](INFO): NAL9602 initialized
2018-03-08T21:51:10.445Z,1520545870.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:10.473Z,1520545870.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:10.839Z,1520545870.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:10.875Z,1520545870.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:11.265Z,1520545871.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:11.280Z,1520545871.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:11.663Z,1520545871.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:11.678Z,1520545871.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:12.040Z,1520545872.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:12.076Z,1520545872.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:12.443Z,1520545872.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:12.471Z,1520545872.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:12.848Z,1520545872.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:12.883Z,1520545872.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:13.243Z,1520545873.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:13.271Z,1520545873.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:13.667Z,1520545873.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:13.682Z,1520545873.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:14.064Z,1520545874.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:14.086Z,1520545874.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:14.463Z,1520545874.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:14.478Z,1520545874.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:14.843Z,1520545874.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:14.872Z,1520545874.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:15.239Z,1520545875.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:15.277Z,1520545875.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:15.636Z,1520545875.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:15.677Z,1520545875.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:16.039Z,1520545876.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:16.074Z,1520545876.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:16.462Z,1520545876.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:16.487Z,1520545876.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:16.866Z,1520545876.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:16.882Z,1520545876.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:17.249Z,1520545877.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:17.287Z,1520545877.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:17.641Z,1520545877.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:17.678Z,1520545877.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:18.042Z,1520545878.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:18.057Z,1520545878.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:18.457Z,1520545878.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:18.483Z,1520545878.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:18.857Z,1520545878.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:18.880Z,1520545878.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:19.256Z,1520545879.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:19.283Z,1520545879.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:19.644Z,1520545879.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:19.660Z,1520545879.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:20.043Z,1520545880.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:20.059Z,1520545880.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:20.457Z,1520545880.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:20.490Z,1520545880.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:20.853Z,1520545880.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:20.868Z,1520545880.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:21.261Z,1520545881.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:21.291Z,1520545881.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:21.648Z,1520545881.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:21.663Z,1520545881.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:22.044Z,1520545882.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:22.059Z,1520545882.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:22.450Z,1520545882.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:22.465Z,1520545882.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:22.853Z,1520545882.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:22.868Z,1520545882.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:23.261Z,1520545883.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:23.276Z,1520545883.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:23.651Z,1520545883.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:23.670Z,1520545883.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:24.050Z,1520545884.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:24.065Z,1520545884.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:24.453Z,1520545884.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:24.469Z,1520545884.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:24.853Z,1520545884.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:24.868Z,1520545884.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:25.253Z,1520545885.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:25.274Z,1520545885.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:25.651Z,1520545885.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:25.667Z,1520545885.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:26.047Z,1520545886.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:26.062Z,1520545886.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:26.453Z,1520545886.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:26.468Z,1520545886.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:26.857Z,1520545886.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:26.872Z,1520545886.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:27.254Z,1520545887.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:27.269Z,1520545887.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:27.650Z,1520545887.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:27.665Z,1520545887.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:28.051Z,1520545888.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:28.066Z,1520545888.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:28.455Z,1520545888.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:28.471Z,1520545888.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:28.856Z,1520545888.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:28.871Z,1520545888.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:29.257Z,1520545889.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:29.273Z,1520545889.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:29.645Z,1520545889.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:29.665Z,1520545889.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:30.051Z,1520545890.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:30.065Z,1520545890.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:30.457Z,1520545890.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:30.472Z,1520545890.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:30.856Z,1520545890.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:30.870Z,1520545890.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:31.256Z,1520545891.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:31.279Z,1520545891.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:31.646Z,1520545891.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:31.661Z,1520545891.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:32.048Z,1520545892.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:32.063Z,1520545892.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:32.455Z,1520545892.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:32.471Z,1520545892.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:32.857Z,1520545892.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:32.872Z,1520545892.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:33.256Z,1520545893.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:33.278Z,1520545893.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:33.647Z,1520545893.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:33.662Z,1520545893.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:34.048Z,1520545894.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:34.064Z,1520545894.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:34.456Z,1520545894.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:34.478Z,1520545894.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:34.856Z,1520545894.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:34.871Z,1520545894.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:34.874Z,1520545894.874 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T21:46:34.9Z
2018-03-08T21:51:34.874Z,1520545894.874 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T21:51:34.874Z,1520545894.874 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T21:51:35.257Z,1520545895.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:35.278Z,1520545895.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:35.750Z,1520545895.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:35.765Z,1520545895.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:36.046Z,1520545896.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:36.067Z,1520545896.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:39.154Z,1520545899.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:39.170Z,1520545899.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:39.285Z,1520545899.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:39.326Z,1520545899.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:39.621Z,1520545899.621 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0328.lzma
2018-03-08T21:51:39.668Z,1520545899.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:39.683Z,1520545899.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:40.052Z,1520545900.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:40.067Z,1520545900.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:40.420Z,1520545900.420 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0328.lzma.bak
2018-03-08T21:51:40.420Z,1520545900.420 [DataOverHttps](INFO): SBD MOMSN=7989420
2018-03-08T21:51:40.450Z,1520545900.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:40.477Z,1520545900.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:41.058Z,1520545901.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:41.073Z,1520545901.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:41.267Z,1520545901.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:41.312Z,1520545901.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:45.600Z,1520545905.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:45.616Z,1520545905.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:45.725Z,1520545905.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:45.761Z,1520545905.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:46.085Z,1520545906.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:46.160Z,1520545906.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:46.475Z,1520545906.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:46.539Z,1520545906.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:46.873Z,1520545906.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:46.888Z,1520545906.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:47.297Z,1520545907.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:47.318Z,1520545907.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:47.689Z,1520545907.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:47.715Z,1520545907.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:50.777Z,1520545910.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:50.809Z,1520545910.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:50.911Z,1520545910.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:50.943Z,1520545910.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:51.255Z,1520545911.255 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0329.lzma
2018-03-08T21:51:51.279Z,1520545911.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:51.312Z,1520545911.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:51.678Z,1520545911.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:51.699Z,1520545911.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:52.056Z,1520545912.056 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0329.lzma.bak
2018-03-08T21:51:52.056Z,1520545912.056 [DataOverHttps](INFO): SBD MOMSN=7989422
2018-03-08T21:51:52.082Z,1520545912.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:52.119Z,1520545912.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:52.671Z,1520545912.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:52.686Z,1520545912.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:52.689Z,1520545912.689 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T21:51:52.689Z,1520545912.689 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T21:51:52.689Z,1520545912.689 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T21:51:52.881Z,1520545912.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:52.897Z,1520545912.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:55.994Z,1520545915.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:56.025Z,1520545916.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:56.115Z,1520545916.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:56.147Z,1520545916.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:56.484Z,1520545916.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:56.522Z,1520545916.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:56.880Z,1520545916.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:56.897Z,1520545916.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:57.281Z,1520545917.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:57.297Z,1520545917.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:57.695Z,1520545917.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:57.730Z,1520545917.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:58.085Z,1520545918.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:58.106Z,1520545918.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:58.485Z,1520545918.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:58.502Z,1520545918.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:58.883Z,1520545918.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:58.898Z,1520545918.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:59.283Z,1520545919.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:59.299Z,1520545919.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:51:59.683Z,1520545919.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:51:59.703Z,1520545919.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:00.083Z,1520545920.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:00.098Z,1520545920.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:00.484Z,1520545920.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:00.500Z,1520545920.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:00.884Z,1520545920.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:00.906Z,1520545920.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:01.298Z,1520545921.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:01.330Z,1520545921.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:01.675Z,1520545921.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:01.690Z,1520545921.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:01.703Z,1520545921.703 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T21:52:02.071Z,1520545922.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:02.107Z,1520545922.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:02.475Z,1520545922.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:02.501Z,1520545922.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:02.871Z,1520545922.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:02.903Z,1520545922.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:03.275Z,1520545923.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:03.302Z,1520545923.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:03.701Z,1520545923.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:03.716Z,1520545923.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:04.098Z,1520545924.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:04.112Z,1520545924.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:04.493Z,1520545924.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:04.548Z,1520545924.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:04.872Z,1520545924.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:04.901Z,1520545924.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:05.267Z,1520545925.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:05.304Z,1520545925.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:05.672Z,1520545925.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:05.706Z,1520545925.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:06.071Z,1520545926.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:06.102Z,1520545926.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:06.503Z,1520545926.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:06.556Z,1520545926.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:06.904Z,1520545926.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:06.919Z,1520545926.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:07.289Z,1520545927.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:07.313Z,1520545927.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:07.676Z,1520545927.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:07.691Z,1520545927.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:08.079Z,1520545928.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:08.095Z,1520545928.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:08.479Z,1520545928.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:08.494Z,1520545928.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:08.881Z,1520545928.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:08.895Z,1520545928.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:09.276Z,1520545929.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:09.291Z,1520545929.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:09.685Z,1520545929.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:09.709Z,1520545929.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:10.081Z,1520545930.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:10.096Z,1520545930.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:10.482Z,1520545930.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:10.497Z,1520545930.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:10.878Z,1520545930.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:10.894Z,1520545930.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:11.275Z,1520545931.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:11.289Z,1520545931.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:11.682Z,1520545931.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:11.697Z,1520545931.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:12.080Z,1520545932.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:12.095Z,1520545932.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:12.481Z,1520545932.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:12.496Z,1520545932.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:12.894Z,1520545932.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:12.923Z,1520545932.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:13.281Z,1520545933.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:13.297Z,1520545933.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:13.679Z,1520545933.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:13.694Z,1520545933.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:14.080Z,1520545934.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:14.095Z,1520545934.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:14.480Z,1520545934.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:14.495Z,1520545934.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:14.876Z,1520545934.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:14.891Z,1520545934.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:15.280Z,1520545935.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:15.295Z,1520545935.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:15.693Z,1520545935.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:15.724Z,1520545935.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:16.084Z,1520545936.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:16.124Z,1520545936.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:16.493Z,1520545936.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:16.523Z,1520545936.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:16.878Z,1520545936.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:16.893Z,1520545936.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:17.275Z,1520545937.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:17.290Z,1520545937.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:17.681Z,1520545937.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:17.697Z,1520545937.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:18.080Z,1520545938.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:18.095Z,1520545938.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:18.493Z,1520545938.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:18.525Z,1520545938.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:18.893Z,1520545938.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:18.924Z,1520545938.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:19.281Z,1520545939.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:19.297Z,1520545939.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:19.679Z,1520545939.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:19.695Z,1520545939.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:20.080Z,1520545940.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:20.095Z,1520545940.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:20.480Z,1520545940.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:20.495Z,1520545940.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:20.880Z,1520545940.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:20.895Z,1520545940.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:21.280Z,1520545941.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:21.295Z,1520545941.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:21.693Z,1520545941.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:21.725Z,1520545941.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:22.093Z,1520545942.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:22.126Z,1520545942.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:22.493Z,1520545942.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:22.524Z,1520545942.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:22.878Z,1520545942.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:22.893Z,1520545942.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:23.279Z,1520545943.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:23.294Z,1520545943.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:23.679Z,1520545943.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:23.694Z,1520545943.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:24.078Z,1520545944.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:24.093Z,1520545944.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:24.486Z,1520545944.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:24.501Z,1520545944.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:24.893Z,1520545944.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:24.924Z,1520545944.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:25.293Z,1520545945.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:25.324Z,1520545945.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:25.675Z,1520545945.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:25.690Z,1520545945.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:26.080Z,1520545946.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:26.095Z,1520545946.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:26.480Z,1520545946.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:26.495Z,1520545946.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:26.880Z,1520545946.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:26.895Z,1520545946.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:27.281Z,1520545947.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:27.296Z,1520545947.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:27.693Z,1520545947.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:27.724Z,1520545947.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:28.081Z,1520545948.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:28.096Z,1520545948.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:28.493Z,1520545948.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:28.523Z,1520545948.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:28.878Z,1520545948.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:28.893Z,1520545948.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:29.275Z,1520545949.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:29.291Z,1520545949.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:29.686Z,1520545949.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:29.706Z,1520545949.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:30.082Z,1520545950.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:30.102Z,1520545950.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:30.487Z,1520545950.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:30.502Z,1520545950.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:30.889Z,1520545950.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:30.905Z,1520545950.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:31.285Z,1520545951.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:31.301Z,1520545951.301 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:31.301Z,1520545951.301 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 282
2018-03-08T21:52:31.301Z,1520545951.301 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T21:52:31.303Z,1520545951.303 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:31.303Z,1520545951.303 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 282
2018-03-08T21:52:31.303Z,1520545951.303 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T21:52:31.305Z,1520545951.305 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:31.305Z,1520545951.305 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 282
2018-03-08T21:52:31.305Z,1520545951.305 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T21:52:31.338Z,1520545951.338 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T21:52:31.338Z,1520545951.338 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T21:52:31.338Z,1520545951.338 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T21:52:31.666Z,1520545951.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:31.711Z,1520545951.711 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T21:52:31.711Z,1520545951.711 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 282
2018-03-08T21:52:31.711Z,1520545951.711 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T21:52:31.712Z,1520545951.712 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 282
2018-03-08T21:52:31.712Z,1520545951.712 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T21:52:31.712Z,1520545951.712 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 282
2018-03-08T21:52:32.081Z,1520545952.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:32.095Z,1520545952.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T21:52:32.095Z,1520545952.095 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:52:32.096Z,1520545952.096 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:52:32.096Z,1520545952.096 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T21:52:32.097Z,1520545952.097 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:52:32.097Z,1520545952.097 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:52:32.097Z,1520545952.097 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T21:52:32.098Z,1520545952.098 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:52:32.098Z,1520545952.098 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:52:32.473Z,1520545952.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:32.506Z,1520545952.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T21:52:32.507Z,1520545952.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:32.877Z,1520545952.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:32.909Z,1520545952.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T21:52:32.910Z,1520545952.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:33.279Z,1520545953.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:33.299Z,1520545953.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T21:52:33.300Z,1520545953.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:33.693Z,1520545953.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:33.714Z,1520545953.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T21:52:33.715Z,1520545953.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:34.095Z,1520545954.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:34.109Z,1520545954.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T21:52:34.110Z,1520545954.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:34.494Z,1520545954.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:34.508Z,1520545954.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T21:52:34.509Z,1520545954.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:34.885Z,1520545954.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:34.900Z,1520545954.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T21:52:34.901Z,1520545954.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:35.266Z,1520545955.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:35.298Z,1520545955.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T21:52:35.299Z,1520545955.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:35.667Z,1520545955.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:35.706Z,1520545955.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T21:52:35.707Z,1520545955.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:36.083Z,1520545956.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:36.098Z,1520545956.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T21:52:36.099Z,1520545956.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:36.491Z,1520545956.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:36.505Z,1520545956.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T21:52:36.506Z,1520545956.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:36.881Z,1520545956.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:36.906Z,1520545956.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T21:52:36.907Z,1520545956.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:37.292Z,1520545957.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:37.314Z,1520545957.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T21:52:37.315Z,1520545957.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:37.684Z,1520545957.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:37.699Z,1520545957.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T21:52:37.700Z,1520545957.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:38.068Z,1520545958.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:38.103Z,1520545958.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T21:52:38.103Z,1520545958.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:38.471Z,1520545958.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:38.502Z,1520545958.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T21:52:38.503Z,1520545958.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:38.871Z,1520545958.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:38.899Z,1520545958.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T21:52:38.900Z,1520545958.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:39.283Z,1520545959.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:39.302Z,1520545959.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T21:52:39.303Z,1520545959.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:39.697Z,1520545959.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:39.719Z,1520545959.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T21:52:39.720Z,1520545959.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:40.097Z,1520545960.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:40.112Z,1520545960.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T21:52:40.113Z,1520545960.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:40.489Z,1520545960.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:40.504Z,1520545960.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T21:52:40.505Z,1520545960.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:40.871Z,1520545960.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:40.902Z,1520545960.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T21:52:40.903Z,1520545960.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:41.271Z,1520545961.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:41.306Z,1520545961.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T21:52:41.307Z,1520545961.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:41.686Z,1520545961.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:41.701Z,1520545961.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T21:52:41.702Z,1520545961.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:42.071Z,1520545962.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:42.096Z,1520545962.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T21:52:42.097Z,1520545962.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:42.494Z,1520545962.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:42.509Z,1520545962.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T21:52:42.510Z,1520545962.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:42.885Z,1520545962.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:42.907Z,1520545962.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T21:52:42.908Z,1520545962.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:43.290Z,1520545963.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:43.304Z,1520545963.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T21:52:43.305Z,1520545963.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:43.667Z,1520545963.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:43.706Z,1520545963.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T21:52:43.707Z,1520545963.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:44.068Z,1520545964.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:44.102Z,1520545964.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T21:52:44.103Z,1520545964.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:44.470Z,1520545964.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:44.503Z,1520545964.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T21:52:44.504Z,1520545964.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:44.867Z,1520545964.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:44.903Z,1520545964.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T21:52:44.904Z,1520545964.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:45.267Z,1520545965.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:45.298Z,1520545965.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T21:52:45.299Z,1520545965.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:45.685Z,1520545965.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:45.707Z,1520545965.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T21:52:45.708Z,1520545965.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:46.090Z,1520545966.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:46.104Z,1520545966.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T21:52:46.105Z,1520545966.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:46.481Z,1520545966.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:46.504Z,1520545966.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T21:52:46.505Z,1520545966.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:46.871Z,1520545966.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:46.897Z,1520545966.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T21:52:46.897Z,1520545966.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:47.271Z,1520545967.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:47.303Z,1520545967.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T21:52:47.304Z,1520545967.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:47.675Z,1520545967.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:47.702Z,1520545967.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T21:52:47.702Z,1520545967.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:48.070Z,1520545968.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:48.096Z,1520545968.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T21:52:48.097Z,1520545968.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:48.488Z,1520545968.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:48.510Z,1520545968.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T21:52:48.511Z,1520545968.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:48.885Z,1520545968.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:48.903Z,1520545968.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T21:52:48.904Z,1520545968.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:49.294Z,1520545969.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:49.309Z,1520545969.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T21:52:49.309Z,1520545969.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:49.674Z,1520545969.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:49.702Z,1520545969.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T21:52:49.703Z,1520545969.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:50.065Z,1520545970.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:50.087Z,1520545970.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T21:52:50.089Z,1520545970.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:50.470Z,1520545970.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:50.502Z,1520545970.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T21:52:50.503Z,1520545970.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:50.871Z,1520545970.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:50.906Z,1520545970.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T21:52:50.907Z,1520545970.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:51.275Z,1520545971.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:51.306Z,1520545971.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:51.685Z,1520545971.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:51.708Z,1520545971.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:52.094Z,1520545972.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:52.109Z,1520545972.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:52.478Z,1520545972.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:52.515Z,1520545972.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:52.873Z,1520545972.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:52.906Z,1520545972.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:53.271Z,1520545973.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:53.306Z,1520545973.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:56.384Z,1520545976.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:56.407Z,1520545976.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:56.504Z,1520545976.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:56.547Z,1520545976.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:56.877Z,1520545976.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:56.907Z,1520545976.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:57.277Z,1520545977.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:57.309Z,1520545977.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:57.673Z,1520545977.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:57.708Z,1520545977.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:58.064Z,1520545978.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:58.083Z,1520545978.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:58.462Z,1520545978.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:58.477Z,1520545978.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:58.865Z,1520545978.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:58.881Z,1520545978.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:59.263Z,1520545979.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:59.283Z,1520545979.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:52:59.677Z,1520545979.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:52:59.709Z,1520545979.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:00.069Z,1520545980.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:00.085Z,1520545980.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:00.465Z,1520545980.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:00.481Z,1520545980.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:00.859Z,1520545980.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:00.874Z,1520545980.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:01.264Z,1520545981.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:01.279Z,1520545981.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:01.665Z,1520545981.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:01.680Z,1520545981.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:02.063Z,1520545982.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:02.079Z,1520545982.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:02.477Z,1520545982.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:02.510Z,1520545982.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:02.878Z,1520545982.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:02.909Z,1520545982.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:03.269Z,1520545983.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:03.290Z,1520545983.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:03.666Z,1520545983.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:03.681Z,1520545983.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:04.063Z,1520545984.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:04.078Z,1520545984.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:04.469Z,1520545984.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:04.484Z,1520545984.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:04.873Z,1520545984.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:04.894Z,1520545984.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:05.272Z,1520545985.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:05.294Z,1520545985.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:05.669Z,1520545985.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:05.685Z,1520545985.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:06.067Z,1520545986.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:06.083Z,1520545986.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:06.473Z,1520545986.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:06.494Z,1520545986.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:06.873Z,1520545986.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:06.888Z,1520545986.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:07.272Z,1520545987.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:07.294Z,1520545987.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:07.668Z,1520545987.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:07.685Z,1520545987.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:08.061Z,1520545988.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:08.082Z,1520545988.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:08.473Z,1520545988.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:08.494Z,1520545988.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:08.873Z,1520545988.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:08.894Z,1520545988.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:09.274Z,1520545989.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:09.289Z,1520545989.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:09.656Z,1520545989.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:09.680Z,1520545989.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:10.072Z,1520545990.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:10.094Z,1520545990.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:10.471Z,1520545990.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:10.487Z,1520545990.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:10.870Z,1520545990.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:10.885Z,1520545990.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:11.257Z,1520545991.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:11.289Z,1520545991.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:11.681Z,1520545991.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:11.696Z,1520545991.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:12.071Z,1520545992.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:12.087Z,1520545992.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:12.473Z,1520545992.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:12.503Z,1520545992.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:12.870Z,1520545992.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:12.885Z,1520545992.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:13.267Z,1520545993.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:13.283Z,1520545993.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:13.654Z,1520545993.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:13.691Z,1520545993.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:14.058Z,1520545994.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:14.088Z,1520545994.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:14.478Z,1520545994.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:14.502Z,1520545994.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:14.881Z,1520545994.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:14.902Z,1520545994.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:15.282Z,1520545995.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:15.298Z,1520545995.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:15.652Z,1520545995.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:15.686Z,1520545995.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:16.054Z,1520545996.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:16.081Z,1520545996.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:16.458Z,1520545996.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:16.473Z,1520545996.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:16.852Z,1520545996.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:16.875Z,1520545996.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:17.254Z,1520545997.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:17.295Z,1520545997.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:17.669Z,1520545997.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:17.697Z,1520545997.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:18.065Z,1520545998.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:18.092Z,1520545998.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:18.465Z,1520545998.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:18.491Z,1520545998.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:18.855Z,1520545998.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:18.870Z,1520545998.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:19.255Z,1520545999.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:19.275Z,1520545999.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:19.663Z,1520545999.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:19.678Z,1520545999.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:20.063Z,1520546000.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:20.077Z,1520546000.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:20.473Z,1520546000.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:20.505Z,1520546000.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:20.873Z,1520546000.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:20.904Z,1520546000.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:21.276Z,1520546001.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:21.306Z,1520546001.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:21.655Z,1520546001.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:21.671Z,1520546001.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:22.063Z,1520546002.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:22.083Z,1520546002.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:22.459Z,1520546002.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:22.474Z,1520546002.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:22.865Z,1520546002.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:22.880Z,1520546002.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:23.263Z,1520546003.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:23.283Z,1520546003.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:23.677Z,1520546003.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:23.709Z,1520546003.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:24.064Z,1520546004.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:24.080Z,1520546004.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:24.477Z,1520546004.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:24.507Z,1520546004.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:24.864Z,1520546004.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:24.879Z,1520546004.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:25.263Z,1520546005.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:25.287Z,1520546005.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:25.664Z,1520546005.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:25.679Z,1520546005.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:26.063Z,1520546006.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:26.078Z,1520546006.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:26.477Z,1520546006.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:26.510Z,1520546006.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:26.870Z,1520546006.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:26.887Z,1520546006.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:27.276Z,1520546007.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:27.291Z,1520546007.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:27.657Z,1520546007.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:27.672Z,1520546007.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:28.062Z,1520546008.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:28.077Z,1520546008.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:28.459Z,1520546008.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:28.474Z,1520546008.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:28.864Z,1520546008.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:28.887Z,1520546008.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:29.266Z,1520546009.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:29.281Z,1520546009.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:29.669Z,1520546009.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:29.684Z,1520546009.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:30.068Z,1520546010.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:30.084Z,1520546010.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:30.469Z,1520546010.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:30.485Z,1520546010.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:30.866Z,1520546010.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:30.881Z,1520546010.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:31.255Z,1520546011.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:31.278Z,1520546011.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:31.665Z,1520546011.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:31.680Z,1520546011.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:32.070Z,1520546012.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:32.085Z,1520546012.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:32.472Z,1520546012.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:32.488Z,1520546012.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:32.872Z,1520546012.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:32.887Z,1520546012.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:33.273Z,1520546013.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:33.288Z,1520546013.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:33.656Z,1520546013.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:33.684Z,1520546013.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:34.067Z,1520546014.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:34.082Z,1520546014.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:34.468Z,1520546014.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:34.483Z,1520546014.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:34.868Z,1520546014.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:34.883Z,1520546014.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:35.278Z,1520546015.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:35.322Z,1520546015.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:35.681Z,1520546015.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:35.698Z,1520546015.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:36.069Z,1520546016.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:36.085Z,1520546016.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:36.474Z,1520546016.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:36.494Z,1520546016.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:36.867Z,1520546016.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:36.883Z,1520546016.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:37.267Z,1520546017.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:37.287Z,1520546017.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:37.663Z,1520546017.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:37.683Z,1520546017.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:38.055Z,1520546018.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:38.090Z,1520546018.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:38.478Z,1520546018.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:38.498Z,1520546018.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:38.880Z,1520546018.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:38.902Z,1520546018.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:39.278Z,1520546019.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:39.293Z,1520546019.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:39.668Z,1520546019.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:39.683Z,1520546019.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:40.054Z,1520546020.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:40.087Z,1520546020.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:40.474Z,1520546020.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:40.490Z,1520546020.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:40.873Z,1520546020.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:40.889Z,1520546020.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:41.277Z,1520546021.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:41.298Z,1520546021.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:41.668Z,1520546021.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:41.683Z,1520546021.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:42.053Z,1520546022.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:42.080Z,1520546022.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:42.473Z,1520546022.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:42.489Z,1520546022.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:42.885Z,1520546022.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:42.932Z,1520546022.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:43.273Z,1520546023.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:43.299Z,1520546023.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:43.665Z,1520546023.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:43.680Z,1520546023.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:44.066Z,1520546024.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:44.118Z,1520546024.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:44.467Z,1520546024.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:44.507Z,1520546024.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:44.869Z,1520546024.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:44.884Z,1520546024.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:45.306Z,1520546025.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:45.321Z,1520546025.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:45.666Z,1520546025.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:45.681Z,1520546025.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:46.067Z,1520546026.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:46.086Z,1520546026.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:46.460Z,1520546026.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:46.494Z,1520546026.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:46.856Z,1520546026.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:46.890Z,1520546026.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:47.256Z,1520546027.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:47.290Z,1520546027.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:47.679Z,1520546027.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:47.694Z,1520546027.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:48.076Z,1520546028.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:48.099Z,1520546028.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:48.478Z,1520546028.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:48.493Z,1520546028.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:48.873Z,1520546028.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:48.887Z,1520546028.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:49.253Z,1520546029.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:49.281Z,1520546029.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:49.657Z,1520546029.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:49.691Z,1520546029.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:50.059Z,1520546030.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:50.087Z,1520546030.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:50.480Z,1520546030.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:50.495Z,1520546030.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:50.880Z,1520546030.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:50.903Z,1520546030.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:51.270Z,1520546031.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:51.285Z,1520546031.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:51.675Z,1520546031.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:51.694Z,1520546031.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:52.058Z,1520546032.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:52.075Z,1520546032.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:52.469Z,1520546032.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:52.485Z,1520546032.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:52.870Z,1520546032.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:52.894Z,1520546032.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:53.269Z,1520546033.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:53.285Z,1520546033.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:53.655Z,1520546033.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:53.674Z,1520546033.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:57.208Z,1520546037.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:57.224Z,1520546037.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:57.346Z,1520546037.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:57.391Z,1520546037.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:57.722Z,1520546037.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:57.754Z,1520546037.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:58.113Z,1520546038.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:58.137Z,1520546038.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:58.511Z,1520546038.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:58.526Z,1520546038.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:58.908Z,1520546038.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:58.924Z,1520546038.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:59.305Z,1520546039.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:59.321Z,1520546039.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:53:59.713Z,1520546039.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:53:59.729Z,1520546039.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:00.121Z,1520546040.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:00.156Z,1520546040.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:00.509Z,1520546040.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:00.524Z,1520546040.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:00.906Z,1520546040.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:00.921Z,1520546040.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:01.307Z,1520546041.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:01.322Z,1520546041.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:01.709Z,1520546041.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:01.724Z,1520546041.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:02.116Z,1520546042.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:02.131Z,1520546042.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:02.513Z,1520546042.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:02.528Z,1520546042.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:02.913Z,1520546042.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:02.928Z,1520546042.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:03.312Z,1520546043.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:03.335Z,1520546043.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:03.710Z,1520546043.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:03.726Z,1520546043.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:04.105Z,1520546044.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:04.120Z,1520546044.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:04.508Z,1520546044.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:04.523Z,1520546044.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:04.910Z,1520546044.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:04.925Z,1520546044.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:05.310Z,1520546045.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:05.326Z,1520546045.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:05.713Z,1520546045.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:05.729Z,1520546045.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:06.116Z,1520546046.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:06.131Z,1520546046.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:06.513Z,1520546046.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:06.529Z,1520546046.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:06.906Z,1520546046.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:06.925Z,1520546046.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:07.311Z,1520546047.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:07.325Z,1520546047.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:07.711Z,1520546047.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:07.727Z,1520546047.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:08.111Z,1520546048.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:08.138Z,1520546048.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:08.523Z,1520546048.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:08.538Z,1520546048.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:08.909Z,1520546048.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:08.937Z,1520546048.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:09.321Z,1520546049.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:09.337Z,1520546049.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:09.698Z,1520546049.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:09.734Z,1520546049.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:10.096Z,1520546050.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:10.112Z,1520546050.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:10.503Z,1520546050.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:10.543Z,1520546050.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:10.907Z,1520546050.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:10.922Z,1520546050.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:11.300Z,1520546051.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:11.316Z,1520546051.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:11.717Z,1520546051.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:11.742Z,1520546051.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:12.117Z,1520546052.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:12.142Z,1520546052.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:12.513Z,1520546052.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:12.545Z,1520546052.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:12.907Z,1520546052.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:12.926Z,1520546052.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:13.306Z,1520546053.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:13.322Z,1520546053.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:13.704Z,1520546053.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:13.720Z,1520546053.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:14.105Z,1520546054.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:14.120Z,1520546054.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:14.517Z,1520546054.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:14.549Z,1520546054.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:14.905Z,1520546054.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:14.920Z,1520546054.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:15.317Z,1520546055.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:15.349Z,1520546055.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:15.707Z,1520546055.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:15.722Z,1520546055.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:16.102Z,1520546056.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:16.117Z,1520546056.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:16.508Z,1520546056.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:16.523Z,1520546056.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:16.909Z,1520546056.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:16.923Z,1520546056.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:17.304Z,1520546057.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:17.319Z,1520546057.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:17.721Z,1520546057.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:17.753Z,1520546057.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:18.122Z,1520546058.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:18.152Z,1520546058.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:18.509Z,1520546058.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:18.525Z,1520546058.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:18.908Z,1520546058.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:18.923Z,1520546058.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:19.307Z,1520546059.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:19.322Z,1520546059.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:19.709Z,1520546059.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:19.724Z,1520546059.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:20.108Z,1520546060.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:20.123Z,1520546060.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:20.521Z,1520546060.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:20.553Z,1520546060.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:20.906Z,1520546060.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:20.921Z,1520546060.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:21.317Z,1520546061.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:21.332Z,1520546061.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:21.708Z,1520546061.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:21.722Z,1520546061.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:22.101Z,1520546062.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:22.116Z,1520546062.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:22.508Z,1520546062.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:22.523Z,1520546062.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:22.906Z,1520546062.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:22.922Z,1520546062.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:23.307Z,1520546063.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:23.323Z,1520546063.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:23.713Z,1520546063.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:23.729Z,1520546063.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:24.121Z,1520546064.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:24.136Z,1520546064.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:24.513Z,1520546064.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:24.528Z,1520546064.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:24.910Z,1520546064.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:24.925Z,1520546064.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:25.306Z,1520546065.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:25.321Z,1520546065.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:25.712Z,1520546065.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:25.727Z,1520546065.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:26.110Z,1520546066.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:26.125Z,1520546066.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:26.513Z,1520546066.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:26.528Z,1520546066.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:26.913Z,1520546066.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:26.928Z,1520546066.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:27.313Z,1520546067.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:27.335Z,1520546067.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:27.709Z,1520546067.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:27.725Z,1520546067.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:28.105Z,1520546068.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:28.120Z,1520546068.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:28.512Z,1520546068.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:28.528Z,1520546068.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:28.903Z,1520546068.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:28.918Z,1520546068.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:29.311Z,1520546069.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:29.326Z,1520546069.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:29.713Z,1520546069.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:29.729Z,1520546069.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:30.112Z,1520546070.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:30.135Z,1520546070.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:30.513Z,1520546070.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:30.529Z,1520546070.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:30.906Z,1520546070.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:30.925Z,1520546070.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:31.308Z,1520546071.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:31.323Z,1520546071.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:31.713Z,1520546071.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:31.729Z,1520546071.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:32.106Z,1520546072.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:32.129Z,1520546072.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:32.518Z,1520546072.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:32.533Z,1520546072.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:32.917Z,1520546072.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:32.941Z,1520546072.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:33.321Z,1520546073.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:33.337Z,1520546073.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:33.708Z,1520546073.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:33.723Z,1520546073.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:34.093Z,1520546074.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:34.135Z,1520546074.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:34.503Z,1520546074.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:34.540Z,1520546074.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:34.900Z,1520546074.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:34.927Z,1520546074.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:35.297Z,1520546075.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:35.330Z,1520546075.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:35.722Z,1520546075.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:35.739Z,1520546075.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:36.122Z,1520546076.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:36.138Z,1520546076.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:36.523Z,1520546076.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:36.543Z,1520546076.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:36.903Z,1520546076.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:36.930Z,1520546076.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:37.299Z,1520546077.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:37.337Z,1520546077.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:37.703Z,1520546077.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:37.731Z,1520546077.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:38.102Z,1520546078.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:38.136Z,1520546078.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:38.518Z,1520546078.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:38.534Z,1520546078.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:38.919Z,1520546078.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:38.935Z,1520546078.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:39.313Z,1520546079.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:39.336Z,1520546079.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:39.698Z,1520546079.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:39.734Z,1520546079.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:40.093Z,1520546080.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:40.117Z,1520546080.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:40.499Z,1520546080.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:40.535Z,1520546080.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:40.899Z,1520546080.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:40.931Z,1520546080.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:41.303Z,1520546081.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:41.335Z,1520546081.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:41.713Z,1520546081.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:41.740Z,1520546081.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:42.130Z,1520546082.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:42.150Z,1520546082.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:42.505Z,1520546082.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:42.520Z,1520546082.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:42.907Z,1520546082.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:42.943Z,1520546082.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:43.306Z,1520546083.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:43.321Z,1520546083.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:43.708Z,1520546083.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:43.724Z,1520546083.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:44.108Z,1520546084.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:44.123Z,1520546084.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:44.521Z,1520546084.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:44.545Z,1520546084.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:44.905Z,1520546084.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:44.921Z,1520546084.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:45.313Z,1520546085.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:45.341Z,1520546085.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:45.708Z,1520546085.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:45.723Z,1520546085.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:46.101Z,1520546086.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:46.117Z,1520546086.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:46.508Z,1520546086.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:46.523Z,1520546086.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:46.909Z,1520546086.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:46.924Z,1520546086.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:47.304Z,1520546087.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:47.319Z,1520546087.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:47.718Z,1520546087.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:47.741Z,1520546087.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:48.121Z,1520546088.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:48.158Z,1520546088.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:48.509Z,1520546088.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:48.524Z,1520546088.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:48.908Z,1520546088.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:48.924Z,1520546088.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:49.307Z,1520546089.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:49.322Z,1520546089.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:49.709Z,1520546089.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:49.724Z,1520546089.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:50.107Z,1520546090.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:50.130Z,1520546090.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:50.513Z,1520546090.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:50.528Z,1520546090.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:50.913Z,1520546090.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:50.928Z,1520546090.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:51.313Z,1520546091.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:51.329Z,1520546091.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:51.708Z,1520546091.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:51.723Z,1520546091.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:52.101Z,1520546092.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:52.116Z,1520546092.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:52.501Z,1520546092.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:52.529Z,1520546092.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:52.911Z,1520546092.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:52.926Z,1520546092.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:53.312Z,1520546093.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:53.327Z,1520546093.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:53.717Z,1520546093.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:53.739Z,1520546093.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:56.821Z,1520546096.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:56.836Z,1520546096.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:56.942Z,1520546096.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:56.982Z,1520546096.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:57.320Z,1520546097.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:57.336Z,1520546097.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:57.720Z,1520546097.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:57.736Z,1520546097.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:58.112Z,1520546098.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:58.140Z,1520546098.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:58.529Z,1520546098.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:58.546Z,1520546098.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:58.929Z,1520546098.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:58.945Z,1520546098.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:59.326Z,1520546099.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:59.342Z,1520546099.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:54:59.718Z,1520546099.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:54:59.737Z,1520546099.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:00.123Z,1520546100.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:00.139Z,1520546100.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:00.511Z,1520546100.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:00.535Z,1520546100.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:00.923Z,1520546100.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:00.942Z,1520546100.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:01.321Z,1520546101.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:01.337Z,1520546101.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:01.725Z,1520546101.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:01.741Z,1520546101.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:02.125Z,1520546102.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:02.141Z,1520546102.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:02.529Z,1520546102.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:02.546Z,1520546102.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:02.907Z,1520546102.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:02.930Z,1520546102.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:03.324Z,1520546103.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:03.340Z,1520546103.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:03.721Z,1520546103.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:03.737Z,1520546103.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:04.122Z,1520546104.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:04.138Z,1520546104.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:04.525Z,1520546104.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:04.541Z,1520546104.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:04.929Z,1520546104.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:04.950Z,1520546104.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:05.329Z,1520546105.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:05.350Z,1520546105.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:05.723Z,1520546105.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:05.738Z,1520546105.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:06.118Z,1520546106.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:06.140Z,1520546106.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:06.523Z,1520546106.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:06.539Z,1520546106.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:06.922Z,1520546106.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:06.938Z,1520546106.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:07.324Z,1520546107.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:07.346Z,1520546107.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:07.728Z,1520546107.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:07.750Z,1520546107.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:08.130Z,1520546108.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:08.146Z,1520546108.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:08.530Z,1520546108.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:08.550Z,1520546108.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:08.924Z,1520546108.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:08.939Z,1520546108.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:09.318Z,1520546109.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:09.339Z,1520546109.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:09.722Z,1520546109.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:09.738Z,1520546109.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:10.115Z,1520546110.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:10.151Z,1520546110.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:10.534Z,1520546110.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:10.550Z,1520546110.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:10.935Z,1520546110.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:10.954Z,1520546110.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:11.333Z,1520546111.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:11.354Z,1520546111.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:11.722Z,1520546111.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:11.738Z,1520546111.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:12.115Z,1520546112.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:12.151Z,1520546112.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:12.525Z,1520546112.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:12.541Z,1520546112.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:12.927Z,1520546112.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:12.943Z,1520546112.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:13.306Z,1520546113.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:13.347Z,1520546113.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:13.737Z,1520546113.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:13.752Z,1520546113.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:14.137Z,1520546114.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:14.153Z,1520546114.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:14.520Z,1520546114.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:14.553Z,1520546114.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:14.911Z,1520546114.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:14.946Z,1520546114.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:15.310Z,1520546115.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:15.347Z,1520546115.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:15.715Z,1520546115.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:15.751Z,1520546115.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:16.114Z,1520546116.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:16.149Z,1520546116.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:16.543Z,1520546116.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:16.566Z,1520546116.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:16.939Z,1520546116.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:16.956Z,1520546116.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:17.317Z,1520546117.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:17.355Z,1520546117.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:17.711Z,1520546117.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:17.727Z,1520546117.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:18.115Z,1520546118.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:18.130Z,1520546118.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:18.512Z,1520546118.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:18.527Z,1520546118.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:18.923Z,1520546118.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:18.956Z,1520546118.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:19.318Z,1520546119.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:19.334Z,1520546119.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:19.729Z,1520546119.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:19.763Z,1520546119.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:20.134Z,1520546120.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:20.164Z,1520546120.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:20.529Z,1520546120.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:20.561Z,1520546120.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:20.914Z,1520546120.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:20.930Z,1520546120.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:21.315Z,1520546121.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:21.353Z,1520546121.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:21.716Z,1520546121.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:21.732Z,1520546121.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:22.118Z,1520546122.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:22.139Z,1520546122.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:22.538Z,1520546122.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:22.571Z,1520546122.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:22.924Z,1520546122.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:22.940Z,1520546122.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:23.326Z,1520546123.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:23.341Z,1520546123.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:23.722Z,1520546123.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:23.738Z,1520546123.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:24.115Z,1520546124.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:24.131Z,1520546124.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:24.522Z,1520546124.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:24.539Z,1520546124.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:24.923Z,1520546124.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:24.939Z,1520546124.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:25.323Z,1520546125.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:25.338Z,1520546125.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:25.726Z,1520546125.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:25.742Z,1520546125.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:26.125Z,1520546126.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:26.141Z,1520546126.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:26.525Z,1520546126.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:26.541Z,1520546126.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:26.922Z,1520546126.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:26.938Z,1520546126.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:27.322Z,1520546127.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:27.338Z,1520546127.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:27.723Z,1520546127.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:27.739Z,1520546127.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:28.122Z,1520546128.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:28.138Z,1520546128.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:28.542Z,1520546128.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:28.571Z,1520546128.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:28.928Z,1520546128.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:28.950Z,1520546128.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:29.330Z,1520546129.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:29.350Z,1520546129.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:29.723Z,1520546129.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:29.739Z,1520546129.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:30.116Z,1520546130.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:30.131Z,1520546130.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:30.523Z,1520546130.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:30.539Z,1520546130.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:30.919Z,1520546130.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:30.942Z,1520546130.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:31.315Z,1520546131.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:31.331Z,1520546131.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:31.728Z,1520546131.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:31.751Z,1520546131.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:32.128Z,1520546132.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:32.150Z,1520546132.150 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:32.151Z,1520546132.151 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 283
2018-03-08T21:55:32.151Z,1520546132.151 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T21:55:32.153Z,1520546132.153 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:32.153Z,1520546132.153 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 283
2018-03-08T21:55:32.153Z,1520546132.153 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T21:55:32.154Z,1520546132.154 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:32.155Z,1520546132.155 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 283
2018-03-08T21:55:32.155Z,1520546132.155 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T21:55:32.183Z,1520546132.183 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T21:55:32.183Z,1520546132.183 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T21:55:32.184Z,1520546132.184 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T21:55:32.528Z,1520546132.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:32.577Z,1520546132.577 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T21:55:32.577Z,1520546132.577 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 283
2018-03-08T21:55:32.577Z,1520546132.577 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T21:55:32.577Z,1520546132.577 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 283
2018-03-08T21:55:32.578Z,1520546132.578 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T21:55:32.578Z,1520546132.578 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 283
2018-03-08T21:55:32.911Z,1520546132.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:32.946Z,1520546132.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T21:55:32.946Z,1520546132.946 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:55:32.946Z,1520546132.946 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:55:32.947Z,1520546132.947 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T21:55:32.947Z,1520546132.947 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:55:32.947Z,1520546132.947 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:55:32.948Z,1520546132.948 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T21:55:32.948Z,1520546132.948 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:55:32.953Z,1520546132.953 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:55:33.314Z,1520546133.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:33.342Z,1520546133.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T21:55:33.343Z,1520546133.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:33.707Z,1520546133.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:33.744Z,1520546133.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T21:55:33.745Z,1520546133.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:34.111Z,1520546134.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:34.150Z,1520546134.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T21:55:34.151Z,1520546134.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:34.541Z,1520546134.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:34.556Z,1520546134.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T21:55:34.557Z,1520546134.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:34.930Z,1520546134.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:34.946Z,1520546134.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T21:55:34.947Z,1520546134.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:35.334Z,1520546135.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:35.355Z,1520546135.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T21:55:35.356Z,1520546135.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:35.711Z,1520546135.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:35.745Z,1520546135.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T21:55:35.746Z,1520546135.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:36.115Z,1520546136.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:36.149Z,1520546136.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T21:55:36.150Z,1520546136.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:36.515Z,1520546136.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:36.547Z,1520546136.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T21:55:36.548Z,1520546136.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:36.911Z,1520546136.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:36.950Z,1520546136.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T21:55:36.950Z,1520546136.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:37.318Z,1520546137.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:37.358Z,1520546137.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T21:55:37.359Z,1520546137.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:37.725Z,1520546137.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:37.757Z,1520546137.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T21:55:37.758Z,1520546137.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:38.146Z,1520546138.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:38.160Z,1520546138.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T21:55:38.161Z,1520546138.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:38.528Z,1520546138.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:38.554Z,1520546138.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T21:55:38.555Z,1520546138.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:38.912Z,1520546138.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:38.927Z,1520546138.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T21:55:38.928Z,1520546138.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:39.318Z,1520546139.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:39.334Z,1520546139.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T21:55:39.335Z,1520546139.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:39.719Z,1520546139.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:39.734Z,1520546139.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T21:55:39.735Z,1520546139.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:40.110Z,1520546140.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:40.130Z,1520546140.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T21:55:40.131Z,1520546140.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:40.542Z,1520546140.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:40.564Z,1520546140.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T21:55:40.565Z,1520546140.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:40.925Z,1520546140.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:40.941Z,1520546140.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T21:55:40.942Z,1520546140.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:41.325Z,1520546141.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:41.341Z,1520546141.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T21:55:41.342Z,1520546141.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:41.719Z,1520546141.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:41.734Z,1520546141.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T21:55:41.735Z,1520546141.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:42.122Z,1520546142.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:42.137Z,1520546142.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T21:55:42.138Z,1520546142.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:42.522Z,1520546142.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:42.537Z,1520546142.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T21:55:42.538Z,1520546142.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:42.921Z,1520546142.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:42.966Z,1520546142.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T21:55:42.967Z,1520546142.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:43.320Z,1520546143.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:43.337Z,1520546143.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T21:55:43.338Z,1520546143.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:43.736Z,1520546143.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:43.751Z,1520546143.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T21:55:43.752Z,1520546143.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:44.136Z,1520546144.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:44.151Z,1520546144.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T21:55:44.151Z,1520546144.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:44.536Z,1520546144.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:44.588Z,1520546144.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T21:55:44.589Z,1520546144.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:44.911Z,1520546144.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:44.944Z,1520546144.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T21:55:44.945Z,1520546144.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:45.316Z,1520546145.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:45.350Z,1520546145.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T21:55:45.351Z,1520546145.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:45.716Z,1520546145.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:45.751Z,1520546145.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T21:55:45.752Z,1520546145.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:46.111Z,1520546146.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:46.147Z,1520546146.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T21:55:46.148Z,1520546146.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:46.523Z,1520546146.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:46.560Z,1520546146.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T21:55:46.565Z,1520546146.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:46.925Z,1520546146.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:46.947Z,1520546146.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T21:55:46.948Z,1520546146.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:47.325Z,1520546147.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:47.350Z,1520546147.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T21:55:47.359Z,1520546147.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:47.719Z,1520546147.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:47.749Z,1520546147.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T21:55:47.750Z,1520546147.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:48.117Z,1520546148.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:48.149Z,1520546148.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T21:55:48.149Z,1520546148.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:48.515Z,1520546148.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:48.539Z,1520546148.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T21:55:48.540Z,1520546148.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:48.915Z,1520546148.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:48.950Z,1520546148.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T21:55:48.951Z,1520546148.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:49.315Z,1520546149.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:49.330Z,1520546149.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T21:55:49.331Z,1520546149.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:49.717Z,1520546149.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:49.734Z,1520546149.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T21:55:49.735Z,1520546149.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:50.134Z,1520546150.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:50.158Z,1520546150.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T21:55:50.159Z,1520546150.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:50.529Z,1520546150.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:50.566Z,1520546150.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T21:55:50.566Z,1520546150.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:50.908Z,1520546150.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:50.924Z,1520546150.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T21:55:50.929Z,1520546150.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:51.322Z,1520546151.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:51.337Z,1520546151.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T21:55:51.338Z,1520546151.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:51.720Z,1520546151.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:51.736Z,1520546151.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T21:55:51.737Z,1520546151.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:52.113Z,1520546152.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:52.140Z,1520546152.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T21:55:52.145Z,1520546152.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:52.527Z,1520546152.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:52.543Z,1520546152.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:52.936Z,1520546152.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:52.951Z,1520546152.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:53.322Z,1520546153.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:53.347Z,1520546153.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:53.711Z,1520546153.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:53.747Z,1520546153.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:56.814Z,1520546156.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:56.839Z,1520546156.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:56.938Z,1520546156.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:56.985Z,1520546156.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:57.310Z,1520546157.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:57.334Z,1520546157.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:57.705Z,1520546157.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:57.734Z,1520546157.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:58.097Z,1520546158.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:58.113Z,1520546158.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:58.491Z,1520546158.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:58.511Z,1520546158.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:58.896Z,1520546158.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:58.911Z,1520546158.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:59.291Z,1520546159.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:59.314Z,1520546159.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:55:59.705Z,1520546159.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:55:59.740Z,1520546159.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:00.109Z,1520546160.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:00.124Z,1520546160.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:00.496Z,1520546160.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:00.518Z,1520546160.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:00.896Z,1520546160.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:00.918Z,1520546160.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:01.295Z,1520546161.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:01.310Z,1520546161.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:01.694Z,1520546161.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:01.713Z,1520546161.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:02.097Z,1520546162.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:02.114Z,1520546162.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:02.501Z,1520546162.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:02.516Z,1520546162.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:02.901Z,1520546162.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:02.916Z,1520546162.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:03.300Z,1520546163.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:03.315Z,1520546163.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:03.698Z,1520546163.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:03.713Z,1520546163.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:04.092Z,1520546164.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:04.107Z,1520546164.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:04.495Z,1520546164.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:04.510Z,1520546164.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:04.897Z,1520546164.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:04.912Z,1520546164.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:05.299Z,1520546165.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:05.315Z,1520546165.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:05.700Z,1520546165.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:05.722Z,1520546165.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:06.105Z,1520546166.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:06.120Z,1520546166.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:06.501Z,1520546166.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:06.517Z,1520546166.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:06.898Z,1520546166.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:06.914Z,1520546166.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:07.295Z,1520546167.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:07.318Z,1520546167.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:07.694Z,1520546167.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:07.709Z,1520546167.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:08.094Z,1520546168.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:08.114Z,1520546168.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:08.501Z,1520546168.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:08.516Z,1520546168.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:08.900Z,1520546168.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:08.916Z,1520546168.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:09.300Z,1520546169.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:09.315Z,1520546169.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:09.699Z,1520546169.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:09.714Z,1520546169.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:10.087Z,1520546170.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:10.117Z,1520546170.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:10.497Z,1520546170.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:10.513Z,1520546170.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:10.899Z,1520546170.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:10.914Z,1520546170.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:11.298Z,1520546171.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:11.313Z,1520546171.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:11.700Z,1520546171.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:11.716Z,1520546171.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:12.101Z,1520546172.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:12.116Z,1520546172.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:12.501Z,1520546172.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:12.517Z,1520546172.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:12.898Z,1520546172.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:12.913Z,1520546172.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:13.295Z,1520546173.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:13.318Z,1520546173.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:13.702Z,1520546173.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:13.719Z,1520546173.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:14.098Z,1520546174.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:14.113Z,1520546174.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:14.502Z,1520546174.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:14.522Z,1520546174.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:14.898Z,1520546174.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:14.921Z,1520546174.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:15.304Z,1520546175.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:15.319Z,1520546175.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:15.699Z,1520546175.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:15.714Z,1520546175.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:16.087Z,1520546176.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:16.119Z,1520546176.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:16.499Z,1520546176.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:16.522Z,1520546176.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:16.900Z,1520546176.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:16.915Z,1520546176.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:17.296Z,1520546177.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:17.312Z,1520546177.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:17.704Z,1520546177.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:17.719Z,1520546177.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:18.104Z,1520546178.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:18.119Z,1520546178.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:18.504Z,1520546178.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:18.519Z,1520546178.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:18.899Z,1520546178.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:18.918Z,1520546178.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:19.300Z,1520546179.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:19.315Z,1520546179.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:19.699Z,1520546179.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:19.715Z,1520546179.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:20.099Z,1520546180.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:20.118Z,1520546180.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:20.504Z,1520546180.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:20.520Z,1520546180.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:20.900Z,1520546180.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:20.915Z,1520546180.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:21.305Z,1520546181.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:21.326Z,1520546181.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:21.699Z,1520546181.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:21.714Z,1520546181.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:22.087Z,1520546182.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:22.122Z,1520546182.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:22.490Z,1520546182.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:22.522Z,1520546182.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:22.887Z,1520546182.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:22.930Z,1520546182.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:23.287Z,1520546183.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:23.323Z,1520546183.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:23.697Z,1520546183.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:23.733Z,1520546183.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:24.109Z,1520546184.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:24.136Z,1520546184.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:24.538Z,1520546184.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:24.554Z,1520546184.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:24.893Z,1520546184.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:24.908Z,1520546184.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:25.295Z,1520546185.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:25.310Z,1520546185.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:25.689Z,1520546185.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:25.723Z,1520546185.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:26.099Z,1520546186.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:26.115Z,1520546186.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:26.505Z,1520546186.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:26.520Z,1520546186.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:26.904Z,1520546186.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:26.927Z,1520546186.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:27.305Z,1520546187.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:27.321Z,1520546187.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:27.701Z,1520546187.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:27.716Z,1520546187.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:28.094Z,1520546188.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:28.110Z,1520546188.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:28.498Z,1520546188.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:28.514Z,1520546188.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:28.902Z,1520546188.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:28.917Z,1520546188.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:29.299Z,1520546189.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:29.315Z,1520546189.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:29.702Z,1520546189.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:29.718Z,1520546189.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:30.105Z,1520546190.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:30.121Z,1520546190.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:30.502Z,1520546190.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:30.518Z,1520546190.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:30.898Z,1520546190.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:30.914Z,1520546190.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:31.298Z,1520546191.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:31.313Z,1520546191.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:31.699Z,1520546191.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:31.715Z,1520546191.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:32.098Z,1520546192.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:32.113Z,1520546192.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:32.501Z,1520546192.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:32.516Z,1520546192.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:32.900Z,1520546192.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:32.915Z,1520546192.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:33.300Z,1520546193.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:33.315Z,1520546193.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:33.699Z,1520546193.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:33.714Z,1520546193.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:34.088Z,1520546194.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:34.110Z,1520546194.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:34.499Z,1520546194.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:34.514Z,1520546194.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:34.887Z,1520546194.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:34.923Z,1520546194.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:35.284Z,1520546195.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:35.319Z,1520546195.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:35.710Z,1520546195.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:35.725Z,1520546195.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:36.112Z,1520546196.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:36.127Z,1520546196.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:36.509Z,1520546196.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:36.530Z,1520546196.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:36.898Z,1520546196.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:36.918Z,1520546196.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:37.299Z,1520546197.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:37.314Z,1520546197.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:37.700Z,1520546197.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:37.715Z,1520546197.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:38.086Z,1520546198.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:38.118Z,1520546198.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:38.510Z,1520546198.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:38.525Z,1520546198.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:38.900Z,1520546198.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:38.923Z,1520546198.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:39.309Z,1520546199.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:39.324Z,1520546199.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:39.699Z,1520546199.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:39.714Z,1520546199.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:40.084Z,1520546200.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:40.111Z,1520546200.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:40.486Z,1520546200.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:40.523Z,1520546200.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:40.900Z,1520546200.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:40.915Z,1520546200.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:41.299Z,1520546201.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:41.314Z,1520546201.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:41.705Z,1520546201.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:41.721Z,1520546201.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:42.112Z,1520546202.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:42.127Z,1520546202.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:42.505Z,1520546202.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:42.521Z,1520546202.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:42.887Z,1520546202.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:42.919Z,1520546202.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:43.300Z,1520546203.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:43.315Z,1520546203.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:43.700Z,1520546203.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:43.715Z,1520546203.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:44.086Z,1520546204.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:44.119Z,1520546204.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:44.510Z,1520546204.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:44.525Z,1520546204.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:44.899Z,1520546204.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:44.919Z,1520546204.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:45.310Z,1520546205.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:45.327Z,1520546205.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:45.699Z,1520546205.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:45.714Z,1520546205.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:46.084Z,1520546206.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:46.119Z,1520546206.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:46.499Z,1520546206.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:46.514Z,1520546206.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:46.887Z,1520546206.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:46.915Z,1520546206.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:47.298Z,1520546207.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:47.315Z,1520546207.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:47.705Z,1520546207.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:47.721Z,1520546207.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:48.113Z,1520546208.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:48.135Z,1520546208.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:48.505Z,1520546208.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:48.521Z,1520546208.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:48.898Z,1520546208.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:48.914Z,1520546208.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:49.287Z,1520546209.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:49.314Z,1520546209.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:49.700Z,1520546209.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:49.715Z,1520546209.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:50.087Z,1520546210.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:50.126Z,1520546210.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:50.513Z,1520546210.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:50.528Z,1520546210.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:50.899Z,1520546210.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:50.919Z,1520546210.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:51.309Z,1520546211.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:51.330Z,1520546211.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:51.700Z,1520546211.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:51.715Z,1520546211.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:52.081Z,1520546212.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:52.108Z,1520546212.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:52.491Z,1520546212.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:52.517Z,1520546212.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:52.891Z,1520546212.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:52.920Z,1520546212.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:52.923Z,1520546212.923 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T21:56:52.923Z,1520546212.923 [Default:CheckIn:C.Wait] Stopped
2018-03-08T21:56:52.923Z,1520546212.923 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T21:56:52.923Z,1520546212.923 [Default:CheckIn:D] Running Loop=1
2018-03-08T21:56:53.283Z,1520546213.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:53.315Z,1520546213.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:53.318Z,1520546213.318 [Default:CheckIn:D] Stopped
2018-03-08T21:56:53.318Z,1520546213.318 [Default:CheckIn:E] Running Loop=1
2018-03-08T21:56:53.705Z,1520546213.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:53.721Z,1520546213.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:53.724Z,1520546213.724 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 851.141862 min 
2018-03-08T21:56:53.724Z,1520546213.724 [Default:CheckIn:E] Stopped
2018-03-08T21:56:53.724Z,1520546213.724 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T21:56:53.724Z,1520546213.724 [Default:CheckIn] Stopped
2018-03-08T21:56:53.725Z,1520546213.725 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T21:56:53.725Z,1520546213.725 [Default:CheckIn](INFO): Running loop #83
2018-03-08T21:56:53.725Z,1520546213.725 [Default:CheckIn] Running Loop=83
2018-03-08T21:56:53.725Z,1520546213.725 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T21:56:53.725Z,1520546213.725 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T21:56:54.108Z,1520546214.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:54.132Z,1520546214.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:57.208Z,1520546217.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:57.230Z,1520546217.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:57.333Z,1520546217.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:57.361Z,1520546217.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:57.713Z,1520546217.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:57.728Z,1520546217.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:58.107Z,1520546218.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:58.126Z,1520546218.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:58.516Z,1520546218.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:58.531Z,1520546218.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:58.918Z,1520546218.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:58.934Z,1520546218.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:59.316Z,1520546219.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:59.331Z,1520546219.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:56:59.741Z,1520546219.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:56:59.759Z,1520546219.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:00.101Z,1520546220.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:00.125Z,1520546220.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:00.499Z,1520546220.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:00.525Z,1520546220.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:00.895Z,1520546220.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:00.927Z,1520546220.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:01.299Z,1520546221.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:01.330Z,1520546221.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:01.702Z,1520546221.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:01.732Z,1520546221.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:02.121Z,1520546222.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:02.137Z,1520546222.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:02.518Z,1520546222.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:02.534Z,1520546222.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:02.895Z,1520546222.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:02.930Z,1520546222.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:03.299Z,1520546223.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:03.330Z,1520546223.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:03.700Z,1520546223.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:03.736Z,1520546223.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:04.100Z,1520546224.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:04.131Z,1520546224.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:04.509Z,1520546224.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:04.536Z,1520546224.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:04.913Z,1520546224.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:04.946Z,1520546224.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:05.309Z,1520546225.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:05.337Z,1520546225.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:05.703Z,1520546225.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:05.736Z,1520546225.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:06.103Z,1520546226.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:06.119Z,1520546226.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:06.504Z,1520546226.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:06.519Z,1520546226.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:06.902Z,1520546226.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:06.917Z,1520546226.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:07.301Z,1520546227.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:07.317Z,1520546227.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:07.718Z,1520546227.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:07.749Z,1520546227.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:08.118Z,1520546228.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:08.151Z,1520546228.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:08.513Z,1520546228.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:08.542Z,1520546228.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:08.905Z,1520546228.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:08.920Z,1520546228.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:09.305Z,1520546229.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:09.320Z,1520546229.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:09.703Z,1520546229.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:09.719Z,1520546229.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:10.102Z,1520546230.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:10.117Z,1520546230.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:10.505Z,1520546230.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:10.521Z,1520546230.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:10.917Z,1520546230.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:10.932Z,1520546230.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:11.310Z,1520546231.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:11.326Z,1520546231.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:11.678Z,1520546231.678 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-03-08T21:57:11.678Z,1520546231.678 [DropWeight] Hardware Fault, FailCount= 1
2018-03-08T21:57:11.678Z,1520546231.678 [DropWeight](ERROR): Hardware Fault
2018-03-08T21:57:11.705Z,1520546231.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:11.741Z,1520546231.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:11.762Z,1520546231.762 [CBIT](INFO): Critical error at 20180308T215711
2018-03-08T21:57:11.764Z,1520546231.764 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-03-08T21:57:11.764Z,1520546231.764 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-03-08T21:57:12.103Z,1520546232.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:12.122Z,1520546232.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:12.134Z,1520546232.134 [CBIT](INFO): Critical error at 20180308T215711
2018-03-08T21:57:12.506Z,1520546232.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:12.522Z,1520546232.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:12.907Z,1520546232.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:12.922Z,1520546232.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:13.307Z,1520546233.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:13.323Z,1520546233.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:13.716Z,1520546233.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:13.731Z,1520546233.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:14.116Z,1520546234.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:14.139Z,1520546234.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:14.516Z,1520546234.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:14.531Z,1520546234.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:14.906Z,1520546234.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:14.927Z,1520546234.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:15.297Z,1520546235.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:15.320Z,1520546235.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:15.691Z,1520546235.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:15.726Z,1520546235.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:16.107Z,1520546236.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:16.126Z,1520546236.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:16.512Z,1520546236.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:16.527Z,1520546236.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:16.914Z,1520546236.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:16.929Z,1520546236.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:17.316Z,1520546237.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:17.339Z,1520546237.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:17.706Z,1520546237.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:17.726Z,1520546237.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:18.089Z,1520546238.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:18.117Z,1520546238.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:18.506Z,1520546238.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:18.527Z,1520546238.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:18.901Z,1520546238.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:18.921Z,1520546238.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:19.290Z,1520546239.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:19.325Z,1520546239.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:19.716Z,1520546239.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:19.731Z,1520546239.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:20.115Z,1520546240.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:20.131Z,1520546240.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:20.508Z,1520546240.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:20.535Z,1520546240.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:20.891Z,1520546240.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:20.919Z,1520546240.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:21.305Z,1520546241.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:21.324Z,1520546241.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:21.691Z,1520546241.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:21.718Z,1520546241.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:22.106Z,1520546242.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:22.121Z,1520546242.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:22.513Z,1520546242.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:22.528Z,1520546242.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:22.921Z,1520546242.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:22.936Z,1520546242.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:23.313Z,1520546243.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:23.328Z,1520546243.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:23.694Z,1520546243.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:23.727Z,1520546243.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:24.107Z,1520546244.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:24.121Z,1520546244.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:24.507Z,1520546244.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:24.526Z,1520546244.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:24.895Z,1520546244.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:24.927Z,1520546244.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:25.298Z,1520546245.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:25.325Z,1520546245.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:25.717Z,1520546245.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:25.733Z,1520546245.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:26.117Z,1520546246.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:26.132Z,1520546246.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:26.510Z,1520546246.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:26.525Z,1520546246.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:26.897Z,1520546246.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:26.930Z,1520546246.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:27.293Z,1520546247.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:27.319Z,1520546247.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:27.691Z,1520546247.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:27.727Z,1520546247.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:28.098Z,1520546248.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:28.124Z,1520546248.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:28.514Z,1520546248.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:28.529Z,1520546248.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:28.913Z,1520546248.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:28.928Z,1520546248.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:29.317Z,1520546249.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:29.332Z,1520546249.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:29.694Z,1520546249.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:29.721Z,1520546249.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:30.089Z,1520546250.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:30.127Z,1520546250.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:30.498Z,1520546250.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:30.525Z,1520546250.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:30.895Z,1520546250.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:30.921Z,1520546250.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:31.298Z,1520546251.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:31.325Z,1520546251.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:31.717Z,1520546251.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:31.732Z,1520546251.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:32.120Z,1520546252.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:32.136Z,1520546252.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:32.516Z,1520546252.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:32.539Z,1520546252.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:32.896Z,1520546252.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:32.930Z,1520546252.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:33.305Z,1520546253.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:33.353Z,1520546253.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:33.708Z,1520546253.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:33.747Z,1520546253.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:34.105Z,1520546254.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:34.147Z,1520546254.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:34.516Z,1520546254.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:34.552Z,1520546254.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:34.915Z,1520546254.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:34.966Z,1520546254.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:35.311Z,1520546255.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:35.354Z,1520546255.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:35.705Z,1520546255.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:35.749Z,1520546255.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:36.101Z,1520546256.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:36.158Z,1520546256.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:36.504Z,1520546256.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:36.528Z,1520546256.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:36.905Z,1520546256.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:36.948Z,1520546256.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:37.305Z,1520546257.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:37.333Z,1520546257.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:37.713Z,1520546257.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:37.753Z,1520546257.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:38.118Z,1520546258.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:38.143Z,1520546258.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:38.515Z,1520546258.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:38.535Z,1520546258.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:38.896Z,1520546258.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:38.935Z,1520546258.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:39.297Z,1520546259.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:39.339Z,1520546259.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:39.697Z,1520546259.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:39.738Z,1520546259.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:40.096Z,1520546260.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:40.135Z,1520546260.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:40.519Z,1520546260.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:40.553Z,1520546260.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:40.910Z,1520546260.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:40.955Z,1520546260.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:41.311Z,1520546261.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:41.348Z,1520546261.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:41.696Z,1520546261.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:41.731Z,1520546261.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:42.104Z,1520546262.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:42.154Z,1520546262.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:42.505Z,1520546262.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:42.544Z,1520546262.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:42.930Z,1520546262.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:42.951Z,1520546262.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:43.305Z,1520546263.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:43.323Z,1520546263.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:43.711Z,1520546263.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:43.757Z,1520546263.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:44.113Z,1520546264.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:44.157Z,1520546264.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:44.511Z,1520546264.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:44.552Z,1520546264.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:44.902Z,1520546264.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:44.946Z,1520546264.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:45.322Z,1520546265.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:45.338Z,1520546265.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:45.700Z,1520546265.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:45.737Z,1520546265.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:46.104Z,1520546266.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:46.155Z,1520546266.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:46.515Z,1520546266.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:46.557Z,1520546266.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:46.913Z,1520546266.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:46.928Z,1520546266.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:47.307Z,1520546267.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:47.326Z,1520546267.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:47.703Z,1520546267.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:47.722Z,1520546267.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:48.103Z,1520546268.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:48.122Z,1520546268.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:48.505Z,1520546268.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:48.528Z,1520546268.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:48.903Z,1520546268.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:48.922Z,1520546268.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:49.306Z,1520546269.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:49.321Z,1520546269.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:49.708Z,1520546269.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:49.739Z,1520546269.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:50.113Z,1520546270.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:50.128Z,1520546270.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:50.512Z,1520546270.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:50.527Z,1520546270.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:50.900Z,1520546270.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:50.916Z,1520546270.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:51.300Z,1520546271.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:51.327Z,1520546271.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:51.708Z,1520546271.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:51.723Z,1520546271.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:52.097Z,1520546272.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:52.120Z,1520546272.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:52.512Z,1520546272.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:52.528Z,1520546272.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:52.916Z,1520546272.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:52.931Z,1520546272.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:53.316Z,1520546273.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:53.339Z,1520546273.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:53.705Z,1520546273.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:53.726Z,1520546273.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:54.101Z,1520546274.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:54.126Z,1520546274.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:57.210Z,1520546277.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:57.226Z,1520546277.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:57.322Z,1520546277.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:57.362Z,1520546277.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:57.699Z,1520546277.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:57.715Z,1520546277.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:58.096Z,1520546278.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:58.111Z,1520546278.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:58.490Z,1520546278.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:58.518Z,1520546278.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:58.882Z,1520546278.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:58.912Z,1520546278.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:59.280Z,1520546279.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:59.313Z,1520546279.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:57:59.679Z,1520546279.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:57:59.711Z,1520546279.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:00.078Z,1520546280.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:00.095Z,1520546280.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:00.489Z,1520546280.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:00.521Z,1520546280.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:00.893Z,1520546280.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:00.917Z,1520546280.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:01.293Z,1520546281.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:01.317Z,1520546281.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:01.679Z,1520546281.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:01.694Z,1520546281.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:02.076Z,1520546282.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:02.092Z,1520546282.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:02.482Z,1520546282.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:02.519Z,1520546282.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:02.883Z,1520546282.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:02.898Z,1520546282.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:03.280Z,1520546283.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:03.295Z,1520546283.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:03.697Z,1520546283.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:03.719Z,1520546283.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:04.084Z,1520546284.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:04.124Z,1520546284.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:04.493Z,1520546284.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:04.544Z,1520546284.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:04.879Z,1520546284.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:04.894Z,1520546284.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:05.283Z,1520546285.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:05.299Z,1520546285.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:05.680Z,1520546285.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:05.695Z,1520546285.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:06.084Z,1520546286.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:06.099Z,1520546286.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:06.497Z,1520546286.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:06.521Z,1520546286.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:06.893Z,1520546286.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:06.923Z,1520546286.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:07.297Z,1520546287.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:07.320Z,1520546287.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:07.677Z,1520546287.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:07.692Z,1520546287.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:08.087Z,1520546288.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:08.103Z,1520546288.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:08.479Z,1520546288.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:08.495Z,1520546288.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:08.884Z,1520546288.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:08.899Z,1520546288.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:09.279Z,1520546289.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:09.295Z,1520546289.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:09.689Z,1520546289.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:09.705Z,1520546289.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:10.086Z,1520546290.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:10.101Z,1520546290.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:10.497Z,1520546290.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:10.527Z,1520546290.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:10.881Z,1520546290.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:10.896Z,1520546290.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:11.283Z,1520546291.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:11.298Z,1520546291.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:11.684Z,1520546291.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:11.700Z,1520546291.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:12.082Z,1520546292.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:12.103Z,1520546292.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:12.484Z,1520546292.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:12.506Z,1520546292.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:12.889Z,1520546292.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:12.904Z,1520546292.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:13.297Z,1520546293.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:13.327Z,1520546293.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:13.679Z,1520546293.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:13.694Z,1520546293.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:14.084Z,1520546294.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:14.099Z,1520546294.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:14.482Z,1520546294.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:14.502Z,1520546294.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:14.885Z,1520546294.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:14.900Z,1520546294.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:15.284Z,1520546295.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:15.299Z,1520546295.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:15.697Z,1520546295.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:15.727Z,1520546295.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:16.086Z,1520546296.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:16.106Z,1520546296.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:16.489Z,1520546296.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:16.505Z,1520546296.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:16.884Z,1520546296.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:16.900Z,1520546296.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:17.285Z,1520546297.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:17.300Z,1520546297.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:17.685Z,1520546297.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:17.706Z,1520546297.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:18.106Z,1520546298.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:18.135Z,1520546298.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:18.503Z,1520546298.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:18.526Z,1520546298.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:18.887Z,1520546298.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:18.923Z,1520546298.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:19.296Z,1520546299.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:19.334Z,1520546299.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:19.698Z,1520546299.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:19.754Z,1520546299.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:20.080Z,1520546300.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:20.095Z,1520546300.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:20.483Z,1520546300.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:20.498Z,1520546300.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:20.879Z,1520546300.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:20.898Z,1520546300.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:21.279Z,1520546301.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:21.295Z,1520546301.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:21.693Z,1520546301.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:21.725Z,1520546301.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:22.097Z,1520546302.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:22.112Z,1520546302.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:22.486Z,1520546302.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:22.506Z,1520546302.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:22.883Z,1520546302.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:22.906Z,1520546302.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:23.287Z,1520546303.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:23.303Z,1520546303.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:23.686Z,1520546303.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:23.702Z,1520546303.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:24.085Z,1520546304.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:24.101Z,1520546304.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:24.489Z,1520546304.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:24.505Z,1520546304.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:24.883Z,1520546304.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:24.915Z,1520546304.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:25.292Z,1520546305.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:25.315Z,1520546305.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:25.686Z,1520546305.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:25.701Z,1520546305.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:26.072Z,1520546306.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:26.098Z,1520546306.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:26.486Z,1520546306.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:26.507Z,1520546306.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:26.887Z,1520546306.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:26.902Z,1520546306.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:27.288Z,1520546307.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:27.303Z,1520546307.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:27.696Z,1520546307.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:27.711Z,1520546307.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:28.096Z,1520546308.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:28.111Z,1520546308.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:28.496Z,1520546308.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:28.511Z,1520546308.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:28.877Z,1520546308.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:28.900Z,1520546308.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:29.270Z,1520546309.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:29.304Z,1520546309.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:29.688Z,1520546309.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:29.703Z,1520546309.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:30.077Z,1520546310.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:30.100Z,1520546310.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:30.497Z,1520546310.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:30.512Z,1520546310.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:30.886Z,1520546310.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:30.913Z,1520546310.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:31.293Z,1520546311.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:31.309Z,1520546311.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:31.670Z,1520546311.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:31.697Z,1520546311.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:32.073Z,1520546312.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:32.100Z,1520546312.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:32.474Z,1520546312.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:32.510Z,1520546312.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:32.871Z,1520546312.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:32.914Z,1520546312.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:33.278Z,1520546313.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:33.310Z,1520546313.310 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:33.310Z,1520546313.310 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 284
2018-03-08T21:58:33.310Z,1520546313.310 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T21:58:33.312Z,1520546313.312 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:33.312Z,1520546313.312 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 284
2018-03-08T21:58:33.312Z,1520546313.312 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T21:58:33.314Z,1520546313.314 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:33.314Z,1520546313.314 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 284
2018-03-08T21:58:33.315Z,1520546313.315 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T21:58:33.326Z,1520546313.326 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T21:58:33.326Z,1520546313.326 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T21:58:33.327Z,1520546313.327 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T21:58:33.707Z,1520546313.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:33.732Z,1520546313.732 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T21:58:33.733Z,1520546313.733 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 284
2018-03-08T21:58:33.734Z,1520546313.734 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T21:58:33.734Z,1520546313.734 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 284
2018-03-08T21:58:33.734Z,1520546313.734 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T21:58:33.734Z,1520546313.734 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 284
2018-03-08T21:58:34.089Z,1520546314.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:34.121Z,1520546314.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T21:58:34.122Z,1520546314.122 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:58:34.122Z,1520546314.122 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:58:34.122Z,1520546314.122 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T21:58:34.123Z,1520546314.123 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:58:34.123Z,1520546314.123 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:58:34.123Z,1520546314.123 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T21:58:34.124Z,1520546314.124 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T21:58:34.124Z,1520546314.124 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T21:58:34.494Z,1520546314.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:34.522Z,1520546314.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T21:58:34.523Z,1520546314.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:34.937Z,1520546314.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:34.967Z,1520546314.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-03-08T21:58:34.968Z,1520546314.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:35.282Z,1520546315.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:35.297Z,1520546315.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T21:58:35.298Z,1520546315.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:35.683Z,1520546315.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:35.725Z,1520546315.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T21:58:35.726Z,1520546315.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:36.082Z,1520546316.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:36.102Z,1520546316.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T21:58:36.103Z,1520546316.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:36.497Z,1520546316.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:36.531Z,1520546316.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T21:58:36.532Z,1520546316.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:36.885Z,1520546316.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:36.906Z,1520546316.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T21:58:36.907Z,1520546316.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:37.285Z,1520546317.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:37.306Z,1520546317.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T21:58:37.307Z,1520546317.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:37.699Z,1520546317.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:37.726Z,1520546317.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T21:58:37.727Z,1520546317.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:38.078Z,1520546318.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:38.106Z,1520546318.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T21:58:38.107Z,1520546318.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:38.486Z,1520546318.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:38.501Z,1520546318.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T21:58:38.502Z,1520546318.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:38.884Z,1520546318.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:38.899Z,1520546318.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T21:58:38.900Z,1520546318.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:39.286Z,1520546319.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:39.301Z,1520546319.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T21:58:39.302Z,1520546319.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:39.686Z,1520546319.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:39.706Z,1520546319.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T21:58:39.707Z,1520546319.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:40.093Z,1520546320.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:40.107Z,1520546320.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T21:58:40.108Z,1520546320.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:40.490Z,1520546320.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:40.505Z,1520546320.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T21:58:40.505Z,1520546320.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:40.887Z,1520546320.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:40.902Z,1520546320.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T21:58:40.903Z,1520546320.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:41.276Z,1520546321.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:41.301Z,1520546321.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T21:58:41.302Z,1520546321.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:41.686Z,1520546321.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:41.706Z,1520546321.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T21:58:41.707Z,1520546321.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:42.082Z,1520546322.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:42.097Z,1520546322.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T21:58:42.098Z,1520546322.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:42.489Z,1520546322.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:42.504Z,1520546322.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T21:58:42.505Z,1520546322.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:42.887Z,1520546322.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:42.903Z,1520546322.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T21:58:42.904Z,1520546322.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:43.289Z,1520546323.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:43.304Z,1520546323.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T21:58:43.305Z,1520546323.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:43.687Z,1520546323.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:43.701Z,1520546323.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T21:58:43.702Z,1520546323.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:44.079Z,1520546324.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:44.094Z,1520546324.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T21:58:44.095Z,1520546324.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:44.491Z,1520546324.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:44.506Z,1520546324.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T21:58:44.507Z,1520546324.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:44.886Z,1520546324.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:44.901Z,1520546324.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T21:58:44.902Z,1520546324.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:45.286Z,1520546325.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:45.301Z,1520546325.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T21:58:45.302Z,1520546325.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:45.688Z,1520546325.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:45.710Z,1520546325.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T21:58:45.711Z,1520546325.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:46.092Z,1520546326.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:46.106Z,1520546326.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T21:58:46.107Z,1520546326.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:46.493Z,1520546326.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:46.507Z,1520546326.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T21:58:46.508Z,1520546326.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:46.890Z,1520546326.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:46.905Z,1520546326.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T21:58:46.906Z,1520546326.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:47.279Z,1520546327.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:47.298Z,1520546327.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T21:58:47.299Z,1520546327.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:47.687Z,1520546327.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:47.703Z,1520546327.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T21:58:47.704Z,1520546327.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:48.082Z,1520546328.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:48.097Z,1520546328.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T21:58:48.098Z,1520546328.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:48.493Z,1520546328.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:48.507Z,1520546328.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T21:58:48.508Z,1520546328.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:48.888Z,1520546328.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:48.903Z,1520546328.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T21:58:48.904Z,1520546328.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:49.290Z,1520546329.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:49.310Z,1520546329.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T21:58:49.311Z,1520546329.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:49.687Z,1520546329.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:49.701Z,1520546329.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T21:58:49.702Z,1520546329.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:50.079Z,1520546330.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:50.098Z,1520546330.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T21:58:50.099Z,1520546330.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:50.482Z,1520546330.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:50.497Z,1520546330.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T21:58:50.498Z,1520546330.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:50.887Z,1520546330.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:50.902Z,1520546330.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T21:58:50.903Z,1520546330.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:51.287Z,1520546331.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:51.302Z,1520546331.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T21:58:51.303Z,1520546331.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:51.692Z,1520546331.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:51.707Z,1520546331.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T21:58:51.708Z,1520546331.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:52.093Z,1520546332.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:52.107Z,1520546332.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T21:58:52.108Z,1520546332.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:52.491Z,1520546332.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:52.507Z,1520546332.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T21:58:52.508Z,1520546332.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:52.882Z,1520546332.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:52.897Z,1520546332.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T21:58:52.898Z,1520546332.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:53.280Z,1520546333.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:53.295Z,1520546333.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T21:58:53.296Z,1520546333.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:53.684Z,1520546333.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:53.699Z,1520546333.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:54.087Z,1520546334.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:54.102Z,1520546334.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:54.492Z,1520546334.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:54.508Z,1520546334.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:57.593Z,1520546337.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:57.614Z,1520546337.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:57.738Z,1520546337.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:57.783Z,1520546337.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:58.094Z,1520546338.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:58.119Z,1520546338.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:58.495Z,1520546338.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:58.511Z,1520546338.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:58.895Z,1520546338.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:58.911Z,1520546338.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:59.291Z,1520546339.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:59.307Z,1520546339.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:58:59.697Z,1520546339.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:58:59.713Z,1520546339.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:00.097Z,1520546340.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:00.112Z,1520546340.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:00.496Z,1520546340.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:00.511Z,1520546340.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:00.888Z,1520546340.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:00.947Z,1520546340.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:01.290Z,1520546341.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:01.306Z,1520546341.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:01.691Z,1520546341.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:01.707Z,1520546341.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:02.081Z,1520546342.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:02.110Z,1520546342.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:02.505Z,1520546342.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:02.526Z,1520546342.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:02.905Z,1520546342.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:02.920Z,1520546342.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:03.304Z,1520546343.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:03.326Z,1520546343.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:03.693Z,1520546343.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:03.708Z,1520546343.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:04.082Z,1520546344.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:04.110Z,1520546344.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:04.493Z,1520546344.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:04.512Z,1520546344.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:04.884Z,1520546344.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:04.915Z,1520546344.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:05.294Z,1520546345.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:05.310Z,1520546345.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:05.698Z,1520546345.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:05.724Z,1520546345.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:06.105Z,1520546346.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:06.120Z,1520546346.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:06.505Z,1520546346.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:06.520Z,1520546346.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:06.880Z,1520546346.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:06.908Z,1520546346.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:07.282Z,1520546347.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:07.316Z,1520546347.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:07.679Z,1520546347.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:07.707Z,1520546347.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:08.076Z,1520546348.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:08.104Z,1520546348.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:08.505Z,1520546348.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:08.520Z,1520546348.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:08.902Z,1520546348.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:08.917Z,1520546348.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:09.305Z,1520546349.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:09.326Z,1520546349.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:09.686Z,1520546349.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:09.719Z,1520546349.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:10.082Z,1520546350.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:10.109Z,1520546350.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:10.486Z,1520546350.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:10.518Z,1520546350.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:10.883Z,1520546350.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:10.915Z,1520546350.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:11.286Z,1520546351.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:11.313Z,1520546351.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:11.690Z,1520546351.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:11.718Z,1520546351.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:12.097Z,1520546352.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:12.126Z,1520546352.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:12.506Z,1520546352.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:12.522Z,1520546352.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:12.883Z,1520546352.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:12.898Z,1520546352.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:13.284Z,1520546353.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:13.299Z,1520546353.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:13.687Z,1520546353.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:13.703Z,1520546353.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:14.080Z,1520546354.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:14.103Z,1520546354.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:14.505Z,1520546354.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:14.536Z,1520546354.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:14.893Z,1520546354.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:14.907Z,1520546354.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:15.289Z,1520546355.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:15.304Z,1520546355.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:15.687Z,1520546355.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:15.706Z,1520546355.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:16.087Z,1520546356.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:16.102Z,1520546356.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:16.488Z,1520546356.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:16.511Z,1520546356.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:16.892Z,1520546356.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:16.907Z,1520546356.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:17.291Z,1520546357.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:17.306Z,1520546357.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:17.692Z,1520546357.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:17.738Z,1520546357.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:18.105Z,1520546358.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:18.136Z,1520546358.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:18.494Z,1520546358.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:18.514Z,1520546358.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:18.886Z,1520546358.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:18.901Z,1520546358.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:19.293Z,1520546359.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:19.308Z,1520546359.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:19.691Z,1520546359.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:19.710Z,1520546359.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:20.088Z,1520546360.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:20.103Z,1520546360.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:20.497Z,1520546360.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:20.588Z,1520546360.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:20.897Z,1520546360.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:20.918Z,1520546360.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:21.297Z,1520546361.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:21.313Z,1520546361.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:21.694Z,1520546361.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:21.709Z,1520546361.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:22.091Z,1520546362.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:22.110Z,1520546362.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:22.488Z,1520546362.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:22.503Z,1520546362.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:22.894Z,1520546362.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:22.909Z,1520546362.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:23.296Z,1520546363.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:23.311Z,1520546363.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:23.696Z,1520546363.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:23.711Z,1520546363.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:24.097Z,1520546364.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:24.112Z,1520546364.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:24.497Z,1520546364.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:24.512Z,1520546364.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:24.888Z,1520546364.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:24.903Z,1520546364.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:25.294Z,1520546365.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:25.310Z,1520546365.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:25.695Z,1520546365.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:25.714Z,1520546365.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:26.081Z,1520546366.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:26.102Z,1520546366.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:26.497Z,1520546366.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:26.513Z,1520546366.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:26.901Z,1520546366.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:26.917Z,1520546366.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:27.298Z,1520546367.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:27.313Z,1520546367.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:27.694Z,1520546367.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:27.709Z,1520546367.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:28.095Z,1520546368.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:28.111Z,1520546368.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:28.486Z,1520546368.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:28.501Z,1520546368.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:28.900Z,1520546368.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:28.915Z,1520546368.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:29.295Z,1520546369.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:29.310Z,1520546369.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:29.695Z,1520546369.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:29.711Z,1520546369.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:30.098Z,1520546370.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:30.113Z,1520546370.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:30.497Z,1520546370.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:30.513Z,1520546370.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:30.889Z,1520546370.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:30.909Z,1520546370.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:31.290Z,1520546371.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:31.310Z,1520546371.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:31.695Z,1520546371.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:31.711Z,1520546371.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:32.094Z,1520546372.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:32.114Z,1520546372.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:32.497Z,1520546372.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:32.513Z,1520546372.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:32.902Z,1520546372.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:32.942Z,1520546372.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:33.297Z,1520546373.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:33.312Z,1520546373.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:33.696Z,1520546373.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:33.719Z,1520546373.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:34.095Z,1520546374.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:34.110Z,1520546374.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:34.487Z,1520546374.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:34.502Z,1520546374.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:34.886Z,1520546374.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:34.919Z,1520546374.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:35.295Z,1520546375.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:35.310Z,1520546375.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:35.701Z,1520546375.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:35.723Z,1520546375.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:36.102Z,1520546376.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:36.117Z,1520546376.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:36.501Z,1520546376.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:36.517Z,1520546376.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:36.885Z,1520546376.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:36.909Z,1520546376.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:37.295Z,1520546377.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:37.311Z,1520546377.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:37.689Z,1520546377.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:37.713Z,1520546377.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:38.089Z,1520546378.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:38.109Z,1520546378.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:38.501Z,1520546378.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:38.517Z,1520546378.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:38.901Z,1520546378.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:38.917Z,1520546378.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:39.300Z,1520546379.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:39.323Z,1520546379.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:39.695Z,1520546379.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:39.719Z,1520546379.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:40.095Z,1520546380.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:40.111Z,1520546380.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:40.491Z,1520546380.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:40.507Z,1520546380.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:40.889Z,1520546380.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:40.917Z,1520546380.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:41.294Z,1520546381.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:41.310Z,1520546381.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:41.696Z,1520546381.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:41.713Z,1520546381.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:42.112Z,1520546382.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:42.132Z,1520546382.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:42.505Z,1520546382.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:42.536Z,1520546382.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:42.884Z,1520546382.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:42.930Z,1520546382.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:43.284Z,1520546383.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:43.336Z,1520546383.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:43.684Z,1520546383.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:43.744Z,1520546383.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:44.083Z,1520546384.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:44.107Z,1520546384.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:44.514Z,1520546384.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:44.537Z,1520546384.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:44.909Z,1520546384.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:44.945Z,1520546384.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:45.295Z,1520546385.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:45.311Z,1520546385.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:45.693Z,1520546385.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:45.743Z,1520546385.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:46.091Z,1520546386.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:46.146Z,1520546386.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:46.491Z,1520546386.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:46.507Z,1520546386.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:46.896Z,1520546386.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:46.912Z,1520546386.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:47.295Z,1520546387.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:47.310Z,1520546387.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:47.697Z,1520546387.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:47.713Z,1520546387.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:48.097Z,1520546388.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:48.112Z,1520546388.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:48.497Z,1520546388.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:48.518Z,1520546388.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:48.894Z,1520546388.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:48.909Z,1520546388.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:49.290Z,1520546389.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:49.306Z,1520546389.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:49.694Z,1520546389.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:49.709Z,1520546389.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:50.094Z,1520546390.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:50.114Z,1520546390.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:50.497Z,1520546390.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:50.513Z,1520546390.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:50.901Z,1520546390.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:50.916Z,1520546390.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:51.334Z,1520546391.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:51.353Z,1520546391.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:51.691Z,1520546391.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:51.707Z,1520546391.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:52.095Z,1520546392.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:52.110Z,1520546392.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:52.494Z,1520546392.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:52.509Z,1520546392.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:52.889Z,1520546392.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:52.909Z,1520546392.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:53.293Z,1520546393.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:53.308Z,1520546393.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:53.697Z,1520546393.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:53.713Z,1520546393.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:54.102Z,1520546394.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:54.117Z,1520546394.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:54.497Z,1520546394.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:54.518Z,1520546394.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:57.859Z,1520546397.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:57.894Z,1520546397.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:57.993Z,1520546397.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:58.008Z,1520546398.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:58.361Z,1520546398.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:58.394Z,1520546398.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:58.761Z,1520546398.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:58.792Z,1520546398.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:59.165Z,1520546399.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:59.186Z,1520546399.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:59.552Z,1520546399.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:59.661Z,1520546399.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T21:59:59.941Z,1520546399.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T21:59:59.973Z,1520546399.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:00.347Z,1520546400.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:00.374Z,1520546400.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:00.766Z,1520546400.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:00.783Z,1520546400.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:01.167Z,1520546401.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:01.182Z,1520546401.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:01.571Z,1520546401.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:01.587Z,1520546401.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:01.944Z,1520546401.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:01.976Z,1520546401.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:02.343Z,1520546402.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:02.383Z,1520546402.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:02.748Z,1520546402.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:02.779Z,1520546402.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:03.143Z,1520546403.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:03.179Z,1520546403.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:03.558Z,1520546403.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:03.585Z,1520546403.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:03.959Z,1520546403.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:03.997Z,1520546403.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:04.358Z,1520546404.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:04.385Z,1520546404.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:04.754Z,1520546404.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:04.770Z,1520546404.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:05.148Z,1520546405.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:05.168Z,1520546405.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:05.549Z,1520546405.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:05.564Z,1520546405.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:05.950Z,1520546405.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:05.966Z,1520546405.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:06.348Z,1520546406.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:06.367Z,1520546406.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:06.760Z,1520546406.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:06.775Z,1520546406.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:07.165Z,1520546407.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:07.180Z,1520546407.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:07.557Z,1520546407.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:07.572Z,1520546407.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:07.950Z,1520546407.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:07.965Z,1520546407.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:08.355Z,1520546408.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:08.370Z,1520546408.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:08.757Z,1520546408.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:08.772Z,1520546408.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:09.149Z,1520546409.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:09.165Z,1520546409.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:09.557Z,1520546409.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:09.572Z,1520546409.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:09.957Z,1520546409.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:09.972Z,1520546409.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:10.355Z,1520546410.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:10.374Z,1520546410.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:10.755Z,1520546410.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:10.771Z,1520546410.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:11.150Z,1520546411.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:11.165Z,1520546411.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:11.553Z,1520546411.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:11.568Z,1520546411.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:11.952Z,1520546411.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:11.967Z,1520546411.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:12.354Z,1520546412.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:12.369Z,1520546412.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:12.755Z,1520546412.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:12.770Z,1520546412.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:13.157Z,1520546413.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:13.172Z,1520546413.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:13.561Z,1520546413.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:13.577Z,1520546413.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:13.953Z,1520546413.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:13.968Z,1520546413.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:14.355Z,1520546414.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:14.370Z,1520546414.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:14.754Z,1520546414.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:14.769Z,1520546414.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:15.154Z,1520546415.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:15.169Z,1520546415.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:15.558Z,1520546415.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:15.573Z,1520546415.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:15.957Z,1520546415.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:15.972Z,1520546415.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:16.356Z,1520546416.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:16.378Z,1520546416.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:16.753Z,1520546416.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:16.768Z,1520546416.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:17.153Z,1520546417.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:17.168Z,1520546417.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:17.550Z,1520546417.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:17.565Z,1520546417.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:17.955Z,1520546417.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:17.970Z,1520546417.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:18.356Z,1520546418.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:18.371Z,1520546418.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:18.757Z,1520546418.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:18.772Z,1520546418.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:19.161Z,1520546419.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:19.176Z,1520546419.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:19.555Z,1520546419.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:19.575Z,1520546419.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:19.954Z,1520546419.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:19.969Z,1520546419.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:20.355Z,1520546420.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:20.371Z,1520546420.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:20.751Z,1520546420.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:20.766Z,1520546420.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:21.153Z,1520546421.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:21.168Z,1520546421.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:21.561Z,1520546421.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:21.576Z,1520546421.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:21.961Z,1520546421.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:21.976Z,1520546421.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:22.357Z,1520546422.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:22.378Z,1520546422.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:22.753Z,1520546422.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:22.768Z,1520546422.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:23.155Z,1520546423.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:23.170Z,1520546423.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:23.549Z,1520546423.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:23.564Z,1520546423.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:23.955Z,1520546423.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:23.971Z,1520546423.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:24.350Z,1520546424.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:24.365Z,1520546424.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:24.755Z,1520546424.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:24.778Z,1520546424.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:25.158Z,1520546425.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:25.178Z,1520546425.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:25.556Z,1520546425.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:25.578Z,1520546425.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:25.955Z,1520546425.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:25.970Z,1520546425.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:26.356Z,1520546426.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:26.371Z,1520546426.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:26.754Z,1520546426.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:26.774Z,1520546426.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:27.150Z,1520546427.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:27.165Z,1520546427.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:27.557Z,1520546427.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:27.573Z,1520546427.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:27.957Z,1520546427.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:27.973Z,1520546427.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:28.357Z,1520546428.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:28.372Z,1520546428.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:28.755Z,1520546428.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:28.770Z,1520546428.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:29.154Z,1520546429.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:29.169Z,1520546429.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:29.549Z,1520546429.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:29.564Z,1520546429.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:29.946Z,1520546429.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:29.970Z,1520546429.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:30.354Z,1520546430.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:30.370Z,1520546430.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:30.761Z,1520546430.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:30.776Z,1520546430.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:31.164Z,1520546431.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:31.179Z,1520546431.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:31.564Z,1520546431.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:31.586Z,1520546431.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:31.950Z,1520546431.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:31.966Z,1520546431.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:32.355Z,1520546432.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:32.371Z,1520546432.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:32.757Z,1520546432.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:32.772Z,1520546432.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:33.149Z,1520546433.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:33.165Z,1520546433.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:33.565Z,1520546433.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:33.586Z,1520546433.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:33.963Z,1520546433.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:33.983Z,1520546433.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:34.363Z,1520546434.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:34.378Z,1520546434.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:34.757Z,1520546434.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:34.772Z,1520546434.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:35.150Z,1520546435.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:35.170Z,1520546435.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:35.554Z,1520546435.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:35.569Z,1520546435.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:35.962Z,1520546435.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:35.977Z,1520546435.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:36.355Z,1520546436.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:36.370Z,1520546436.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:36.762Z,1520546436.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:36.777Z,1520546436.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:37.164Z,1520546437.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:37.186Z,1520546437.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:37.564Z,1520546437.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:37.579Z,1520546437.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:37.955Z,1520546437.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:37.970Z,1520546437.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:38.349Z,1520546438.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:38.371Z,1520546438.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:38.748Z,1520546438.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:38.779Z,1520546438.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:39.157Z,1520546439.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:39.172Z,1520546439.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:39.564Z,1520546439.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:39.579Z,1520546439.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:39.965Z,1520546439.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:39.980Z,1520546439.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:40.363Z,1520546440.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:40.378Z,1520546440.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:40.754Z,1520546440.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:40.769Z,1520546440.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:41.159Z,1520546441.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:41.174Z,1520546441.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:41.543Z,1520546441.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:41.580Z,1520546441.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:41.938Z,1520546441.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:41.969Z,1520546441.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:42.346Z,1520546442.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:42.383Z,1520546442.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:42.767Z,1520546442.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:42.782Z,1520546442.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:43.161Z,1520546443.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:43.181Z,1520546443.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:43.557Z,1520546443.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:43.580Z,1520546443.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:43.945Z,1520546443.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:43.978Z,1520546443.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:44.347Z,1520546444.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:44.376Z,1520546444.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:44.743Z,1520546444.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:44.779Z,1520546444.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:45.142Z,1520546445.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:45.176Z,1520546445.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:45.549Z,1520546445.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:45.579Z,1520546445.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:45.968Z,1520546445.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:45.990Z,1520546445.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:46.353Z,1520546446.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:46.383Z,1520546446.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:46.742Z,1520546446.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:46.766Z,1520546446.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:47.148Z,1520546447.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:47.180Z,1520546447.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:47.550Z,1520546447.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:47.585Z,1520546447.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:47.938Z,1520546447.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:47.954Z,1520546447.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:48.350Z,1520546448.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:48.387Z,1520546448.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:48.761Z,1520546448.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:48.794Z,1520546448.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:49.154Z,1520546449.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:49.177Z,1520546449.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:49.561Z,1520546449.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:49.585Z,1520546449.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:49.947Z,1520546449.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:49.962Z,1520546449.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:50.347Z,1520546450.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:50.374Z,1520546450.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:50.751Z,1520546450.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:50.767Z,1520546450.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:51.150Z,1520546451.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:51.166Z,1520546451.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:51.556Z,1520546451.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:51.571Z,1520546451.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:51.965Z,1520546451.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:51.995Z,1520546451.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:52.357Z,1520546452.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:52.396Z,1520546452.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:52.747Z,1520546452.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:52.763Z,1520546452.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:53.148Z,1520546453.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:53.167Z,1520546453.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:53.552Z,1520546453.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:53.567Z,1520546453.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:53.949Z,1520546453.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:53.964Z,1520546453.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:54.348Z,1520546454.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:54.367Z,1520546454.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:54.756Z,1520546454.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:54.771Z,1520546454.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:57.869Z,1520546457.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:57.894Z,1520546457.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:58.028Z,1520546458.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:58.043Z,1520546458.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:58.357Z,1520546458.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:58.373Z,1520546458.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:58.756Z,1520546458.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:58.771Z,1520546458.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:59.154Z,1520546459.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:59.169Z,1520546459.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:59.569Z,1520546459.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:59.591Z,1520546459.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:00:59.965Z,1520546459.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:00:59.993Z,1520546459.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:00.365Z,1520546460.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:00.397Z,1520546460.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:00.752Z,1520546460.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:00.767Z,1520546460.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:01.155Z,1520546461.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:01.170Z,1520546461.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:01.553Z,1520546461.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:01.569Z,1520546461.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:01.956Z,1520546461.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:01.971Z,1520546461.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:02.355Z,1520546462.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:02.370Z,1520546462.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:02.766Z,1520546462.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:02.797Z,1520546462.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:03.165Z,1520546463.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:03.192Z,1520546463.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:03.565Z,1520546463.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:03.580Z,1520546463.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:03.951Z,1520546463.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:03.967Z,1520546463.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:04.355Z,1520546464.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:04.374Z,1520546464.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:04.753Z,1520546464.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:04.768Z,1520546464.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:05.151Z,1520546465.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:05.167Z,1520546465.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:05.561Z,1520546465.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:05.577Z,1520546465.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:05.965Z,1520546465.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:05.980Z,1520546465.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:06.369Z,1520546466.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:06.399Z,1520546466.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:06.757Z,1520546466.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:06.778Z,1520546466.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:07.154Z,1520546467.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:07.169Z,1520546467.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:07.551Z,1520546467.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:07.575Z,1520546467.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:07.956Z,1520546467.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:07.978Z,1520546467.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:08.356Z,1520546468.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:08.370Z,1520546468.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:08.769Z,1520546468.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:08.805Z,1520546468.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:09.165Z,1520546469.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:09.180Z,1520546469.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:09.561Z,1520546469.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:09.579Z,1520546469.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:09.956Z,1520546469.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:09.971Z,1520546469.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:10.353Z,1520546470.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:10.373Z,1520546470.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:10.756Z,1520546470.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:10.771Z,1520546470.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:11.158Z,1520546471.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:11.173Z,1520546471.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:11.534Z,1520546471.534 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T22:01:11.534Z,1520546471.534 [NAL9602] Data Fault, FailCount= 4
2018-03-08T22:01:11.534Z,1520546471.534 [NAL9602](ERROR): Data Fault
2018-03-08T22:01:11.573Z,1520546471.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:11.605Z,1520546471.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:11.630Z,1520546471.630 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T22:01:11.930Z,1520546471.930 [NAL9602](INFO): Powering down
2018-03-08T22:01:11.961Z,1520546471.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:11.976Z,1520546471.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:12.359Z,1520546472.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:12.374Z,1520546472.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:12.755Z,1520546472.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:12.770Z,1520546472.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:12.783Z,1520546472.783 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T22:01:12.784Z,1520546472.784 [NAL9602] No Fault, FailCount= 4
2018-03-08T22:01:13.154Z,1520546473.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:13.169Z,1520546473.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:13.558Z,1520546473.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:13.573Z,1520546473.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:13.954Z,1520546473.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:13.969Z,1520546473.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:14.352Z,1520546474.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:14.368Z,1520546474.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:14.758Z,1520546474.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:14.773Z,1520546474.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:15.155Z,1520546475.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:15.171Z,1520546475.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:15.554Z,1520546475.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:15.574Z,1520546475.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:15.957Z,1520546475.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:15.972Z,1520546475.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:16.362Z,1520546476.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:16.377Z,1520546476.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:16.758Z,1520546476.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:16.773Z,1520546476.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:17.159Z,1520546477.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:17.175Z,1520546477.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:17.558Z,1520546477.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:17.573Z,1520546477.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:17.954Z,1520546477.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:17.969Z,1520546477.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:18.358Z,1520546478.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:18.373Z,1520546478.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:18.755Z,1520546478.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:18.770Z,1520546478.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:19.157Z,1520546479.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:19.173Z,1520546479.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:19.559Z,1520546479.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:19.582Z,1520546479.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:19.955Z,1520546479.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:19.974Z,1520546479.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:20.356Z,1520546480.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:20.371Z,1520546480.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:20.751Z,1520546480.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:20.775Z,1520546480.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:21.159Z,1520546481.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:21.178Z,1520546481.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:21.561Z,1520546481.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:21.576Z,1520546481.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:21.953Z,1520546481.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:21.973Z,1520546481.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:22.351Z,1520546482.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:22.387Z,1520546482.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:22.760Z,1520546482.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:22.775Z,1520546482.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:23.144Z,1520546483.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:23.176Z,1520546483.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:23.551Z,1520546483.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:23.583Z,1520546483.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:23.950Z,1520546483.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:23.987Z,1520546483.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:24.349Z,1520546484.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:24.383Z,1520546484.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:24.754Z,1520546484.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:24.786Z,1520546484.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:25.146Z,1520546485.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:25.184Z,1520546485.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:25.547Z,1520546485.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:25.574Z,1520546485.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:25.947Z,1520546485.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:26.074Z,1520546486.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:26.343Z,1520546486.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:26.358Z,1520546486.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:26.743Z,1520546486.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:26.760Z,1520546486.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:27.153Z,1520546487.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:27.168Z,1520546487.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:27.547Z,1520546487.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:27.562Z,1520546487.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:27.947Z,1520546487.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:27.962Z,1520546487.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:28.354Z,1520546488.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:28.390Z,1520546488.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:28.753Z,1520546488.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:28.769Z,1520546488.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:29.147Z,1520546489.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:29.162Z,1520546489.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:29.556Z,1520546489.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:29.571Z,1520546489.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:29.951Z,1520546489.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:29.967Z,1520546489.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:30.355Z,1520546490.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:30.371Z,1520546490.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:30.755Z,1520546490.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:30.771Z,1520546490.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:31.155Z,1520546491.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:31.170Z,1520546491.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:31.551Z,1520546491.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:31.566Z,1520546491.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:31.955Z,1520546491.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:31.970Z,1520546491.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:32.355Z,1520546492.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:32.370Z,1520546492.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:32.750Z,1520546492.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:32.765Z,1520546492.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:33.152Z,1520546493.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:33.170Z,1520546493.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:33.555Z,1520546493.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:33.570Z,1520546493.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:33.949Z,1520546493.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:33.964Z,1520546493.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:34.356Z,1520546494.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:34.371Z,1520546494.371 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:34.371Z,1520546494.371 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 285
2018-03-08T22:01:34.371Z,1520546494.371 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T22:01:34.373Z,1520546494.373 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:34.373Z,1520546494.373 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 285
2018-03-08T22:01:34.373Z,1520546494.373 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T22:01:34.375Z,1520546494.375 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:34.375Z,1520546494.375 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 285
2018-03-08T22:01:34.375Z,1520546494.375 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T22:01:34.417Z,1520546494.417 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T22:01:34.418Z,1520546494.418 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T22:01:34.418Z,1520546494.418 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T22:01:34.752Z,1520546494.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:34.797Z,1520546494.797 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T22:01:34.797Z,1520546494.797 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 285
2018-03-08T22:01:34.798Z,1520546494.798 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T22:01:34.798Z,1520546494.798 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 285
2018-03-08T22:01:34.798Z,1520546494.798 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T22:01:34.799Z,1520546494.799 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 285
2018-03-08T22:01:35.152Z,1520546495.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:35.167Z,1520546495.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T22:01:35.167Z,1520546495.167 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:01:35.167Z,1520546495.167 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:01:35.168Z,1520546495.168 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T22:01:35.168Z,1520546495.168 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:01:35.169Z,1520546495.169 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:01:35.169Z,1520546495.169 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T22:01:35.169Z,1520546495.169 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:01:35.170Z,1520546495.170 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:01:35.559Z,1520546495.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:35.574Z,1520546495.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T22:01:35.575Z,1520546495.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:35.954Z,1520546495.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:35.969Z,1520546495.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T22:01:35.970Z,1520546495.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:36.355Z,1520546496.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:36.370Z,1520546496.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T22:01:36.371Z,1520546496.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:36.757Z,1520546496.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:36.772Z,1520546496.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T22:01:36.773Z,1520546496.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:37.154Z,1520546497.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:37.168Z,1520546497.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T22:01:37.169Z,1520546497.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:37.551Z,1520546497.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:37.566Z,1520546497.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T22:01:37.567Z,1520546497.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:37.954Z,1520546497.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:37.968Z,1520546497.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T22:01:37.969Z,1520546497.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:38.352Z,1520546498.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:38.367Z,1520546498.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T22:01:38.368Z,1520546498.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:38.751Z,1520546498.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:38.766Z,1520546498.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T22:01:38.767Z,1520546498.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:39.159Z,1520546499.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:39.182Z,1520546499.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T22:01:39.183Z,1520546499.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:39.558Z,1520546499.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:39.572Z,1520546499.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T22:01:39.573Z,1520546499.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:39.953Z,1520546499.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:39.968Z,1520546499.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T22:01:39.969Z,1520546499.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:40.348Z,1520546500.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:40.380Z,1520546500.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T22:01:40.381Z,1520546500.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:40.754Z,1520546500.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:40.768Z,1520546500.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T22:01:40.769Z,1520546500.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:41.150Z,1520546501.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:41.170Z,1520546501.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T22:01:41.171Z,1520546501.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:41.554Z,1520546501.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:41.573Z,1520546501.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T22:01:41.574Z,1520546501.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:41.954Z,1520546501.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:41.969Z,1520546501.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T22:01:41.970Z,1520546501.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:42.330Z,1520546502.330 [NAL9602](INFO): Powering up NAL9602
2018-03-08T22:01:42.358Z,1520546502.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:42.374Z,1520546502.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T22:01:42.375Z,1520546502.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:42.753Z,1520546502.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:42.774Z,1520546502.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T22:01:42.775Z,1520546502.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:43.155Z,1520546503.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:43.175Z,1520546503.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T22:01:43.175Z,1520546503.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:43.545Z,1520546503.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:43.594Z,1520546503.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T22:01:43.595Z,1520546503.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:43.963Z,1520546503.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:43.990Z,1520546503.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T22:01:43.991Z,1520546503.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:44.348Z,1520546504.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:44.419Z,1520546504.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T22:01:44.420Z,1520546504.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:44.747Z,1520546504.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:44.779Z,1520546504.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T22:01:44.780Z,1520546504.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:45.150Z,1520546505.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:45.223Z,1520546505.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T22:01:45.223Z,1520546505.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:45.546Z,1520546505.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:45.561Z,1520546505.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T22:01:45.564Z,1520546505.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:45.947Z,1520546505.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:45.962Z,1520546505.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T22:01:45.963Z,1520546505.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:46.349Z,1520546506.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:46.396Z,1520546506.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T22:01:46.402Z,1520546506.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:46.751Z,1520546506.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:46.766Z,1520546506.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T22:01:46.767Z,1520546506.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:47.143Z,1520546507.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:47.158Z,1520546507.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T22:01:47.159Z,1520546507.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:47.554Z,1520546507.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:47.570Z,1520546507.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T22:01:47.571Z,1520546507.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:47.948Z,1520546507.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:47.983Z,1520546507.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T22:01:47.984Z,1520546507.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:48.351Z,1520546508.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:48.366Z,1520546508.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T22:01:48.367Z,1520546508.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:48.755Z,1520546508.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:48.778Z,1520546508.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T22:01:48.779Z,1520546508.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:49.154Z,1520546509.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:49.169Z,1520546509.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T22:01:49.170Z,1520546509.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:49.553Z,1520546509.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:49.568Z,1520546509.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T22:01:49.569Z,1520546509.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:49.955Z,1520546509.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:49.970Z,1520546509.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T22:01:49.971Z,1520546509.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:50.353Z,1520546510.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:50.367Z,1520546510.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T22:01:50.368Z,1520546510.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:50.752Z,1520546510.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:50.767Z,1520546510.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T22:01:50.768Z,1520546510.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:51.155Z,1520546511.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:51.170Z,1520546511.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T22:01:51.171Z,1520546511.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:51.546Z,1520546511.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:51.580Z,1520546511.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T22:01:51.581Z,1520546511.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:51.943Z,1520546511.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:51.974Z,1520546511.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T22:01:51.975Z,1520546511.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:52.350Z,1520546512.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:52.375Z,1520546512.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T22:01:52.377Z,1520546512.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:52.769Z,1520546512.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:52.784Z,1520546512.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T22:01:52.785Z,1520546512.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:53.134Z,1520546513.134 [NAL9602](INFO): NAL9602 initialized
2018-03-08T22:01:53.150Z,1520546513.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:53.186Z,1520546513.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T22:01:53.187Z,1520546513.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:53.550Z,1520546513.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:53.576Z,1520546513.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T22:01:53.577Z,1520546513.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:53.965Z,1520546513.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:53.980Z,1520546513.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T22:01:53.981Z,1520546513.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:53.984Z,1520546513.984 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T21:56:53.7Z
2018-03-08T22:01:53.984Z,1520546513.984 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T22:01:53.984Z,1520546513.984 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T22:01:54.364Z,1520546514.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:54.386Z,1520546514.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:54.870Z,1520546514.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:54.885Z,1520546514.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:57.860Z,1520546517.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:57.876Z,1520546517.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:57.978Z,1520546517.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:57.998Z,1520546517.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:58.319Z,1520546518.319 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20180308T074127/Courier0332.lzma
2018-03-08T22:01:58.349Z,1520546518.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:58.385Z,1520546518.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:58.737Z,1520546518.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:58.752Z,1520546518.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:59.100Z,1520546519.100 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0332.lzma.bak
2018-03-08T22:01:59.100Z,1520546519.100 [DataOverHttps](INFO): SBD MOMSN=7989481
2018-03-08T22:01:59.143Z,1520546519.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:59.174Z,1520546519.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:59.728Z,1520546519.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:59.750Z,1520546519.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:01:59.938Z,1520546519.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:01:59.958Z,1520546519.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:00.339Z,1520546520.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:00.363Z,1520546520.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:03.438Z,1520546523.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:03.453Z,1520546523.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:03.466Z,1520546523.466 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T22:02:03.566Z,1520546523.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:03.591Z,1520546523.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:03.926Z,1520546523.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:03.944Z,1520546523.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:04.314Z,1520546524.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:04.332Z,1520546524.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:04.708Z,1520546524.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:04.757Z,1520546524.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:05.117Z,1520546525.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:05.141Z,1520546525.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:05.504Z,1520546525.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:05.544Z,1520546525.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:08.605Z,1520546528.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:08.642Z,1520546528.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:08.744Z,1520546528.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:08.760Z,1520546528.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:09.073Z,1520546529.073 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180308T074127/Express0333.lzma
2018-03-08T22:02:09.119Z,1520546529.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:09.141Z,1520546529.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:09.513Z,1520546529.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:09.536Z,1520546529.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:09.872Z,1520546529.872 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0333.lzma.bak
2018-03-08T22:02:09.872Z,1520546529.872 [DataOverHttps](INFO): SBD MOMSN=7989485
2018-03-08T22:02:09.911Z,1520546529.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:10.001Z,1520546530.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:10.490Z,1520546530.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:10.511Z,1520546530.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:10.514Z,1520546530.514 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T22:02:10.514Z,1520546530.514 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T22:02:10.514Z,1520546530.514 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T22:02:10.696Z,1520546530.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:10.742Z,1520546530.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:13.817Z,1520546533.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:13.841Z,1520546533.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:13.954Z,1520546533.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:13.969Z,1520546533.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:14.316Z,1520546534.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:14.346Z,1520546534.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:14.702Z,1520546534.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:14.718Z,1520546534.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:15.086Z,1520546535.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:15.123Z,1520546535.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:15.500Z,1520546535.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:15.520Z,1520546535.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:15.898Z,1520546535.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:15.918Z,1520546535.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:16.301Z,1520546536.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:16.322Z,1520546536.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:16.705Z,1520546536.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:16.750Z,1520546536.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:17.100Z,1520546537.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:17.119Z,1520546537.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:17.485Z,1520546537.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:17.513Z,1520546537.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:17.896Z,1520546537.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:17.914Z,1520546537.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:18.299Z,1520546538.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:18.342Z,1520546538.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:18.683Z,1520546538.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:18.710Z,1520546538.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:19.098Z,1520546539.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:19.118Z,1520546539.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:19.508Z,1520546539.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:19.523Z,1520546539.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:19.902Z,1520546539.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:19.941Z,1520546539.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:20.304Z,1520546540.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:20.325Z,1520546540.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:20.699Z,1520546540.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:20.719Z,1520546540.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:21.080Z,1520546541.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:21.111Z,1520546541.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:21.491Z,1520546541.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:21.543Z,1520546541.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:21.894Z,1520546541.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:21.909Z,1520546541.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:22.307Z,1520546542.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:22.325Z,1520546542.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:22.708Z,1520546542.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:22.730Z,1520546542.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:23.109Z,1520546543.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:23.145Z,1520546543.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:23.484Z,1520546543.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:23.510Z,1520546543.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:23.889Z,1520546543.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:23.917Z,1520546543.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:24.305Z,1520546544.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:24.320Z,1520546544.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:24.683Z,1520546544.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:24.731Z,1520546544.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:25.099Z,1520546545.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:25.117Z,1520546545.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:25.511Z,1520546545.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:25.527Z,1520546545.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:25.908Z,1520546545.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:25.923Z,1520546545.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:26.314Z,1520546546.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:26.344Z,1520546546.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:26.695Z,1520546546.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:26.710Z,1520546546.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:27.090Z,1520546547.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:27.115Z,1520546547.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:27.501Z,1520546547.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:27.517Z,1520546547.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:27.894Z,1520546547.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:27.945Z,1520546547.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:28.300Z,1520546548.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:28.320Z,1520546548.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:28.741Z,1520546548.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:28.756Z,1520546548.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:29.104Z,1520546549.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:29.119Z,1520546549.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:29.500Z,1520546549.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:29.566Z,1520546549.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:29.897Z,1520546549.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:29.914Z,1520546549.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:30.299Z,1520546550.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:30.319Z,1520546550.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:30.693Z,1520546550.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:30.719Z,1520546550.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:31.098Z,1520546551.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:31.144Z,1520546551.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:31.501Z,1520546551.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:31.522Z,1520546551.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:31.903Z,1520546551.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:31.922Z,1520546551.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:32.309Z,1520546552.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:32.366Z,1520546552.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:32.697Z,1520546552.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:32.725Z,1520546552.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:33.085Z,1520546553.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:33.125Z,1520546553.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:33.501Z,1520546553.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:33.521Z,1520546553.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:33.904Z,1520546553.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:33.919Z,1520546553.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:34.305Z,1520546554.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:34.346Z,1520546554.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:34.705Z,1520546554.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:34.725Z,1520546554.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:35.108Z,1520546555.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:35.125Z,1520546555.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:35.500Z,1520546555.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:35.522Z,1520546555.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:35.899Z,1520546555.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:35.948Z,1520546555.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:36.292Z,1520546556.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:36.307Z,1520546556.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:36.693Z,1520546556.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:36.714Z,1520546556.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:37.101Z,1520546557.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:37.117Z,1520546557.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:37.504Z,1520546557.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:37.546Z,1520546557.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:37.900Z,1520546557.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:37.921Z,1520546557.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:38.305Z,1520546558.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:38.323Z,1520546558.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:38.703Z,1520546558.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:38.718Z,1520546558.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:39.091Z,1520546559.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:39.131Z,1520546559.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:39.499Z,1520546559.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:39.518Z,1520546559.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:39.899Z,1520546559.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:39.919Z,1520546559.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:40.306Z,1520546560.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:40.322Z,1520546560.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:40.706Z,1520546560.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:40.745Z,1520546560.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:41.105Z,1520546561.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:41.125Z,1520546561.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:41.499Z,1520546561.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:41.519Z,1520546561.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:41.899Z,1520546561.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:41.922Z,1520546561.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:42.299Z,1520546562.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:42.325Z,1520546562.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:42.681Z,1520546562.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:42.719Z,1520546562.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:43.094Z,1520546563.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:43.116Z,1520546563.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:43.508Z,1520546563.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:43.523Z,1520546563.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:43.900Z,1520546563.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:43.945Z,1520546563.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:44.303Z,1520546564.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:44.324Z,1520546564.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:44.699Z,1520546564.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:44.719Z,1520546564.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:45.080Z,1520546565.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:45.117Z,1520546565.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:45.501Z,1520546565.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:45.516Z,1520546565.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:45.898Z,1520546565.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:45.916Z,1520546565.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:46.312Z,1520546566.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:46.327Z,1520546566.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:46.709Z,1520546566.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:46.731Z,1520546566.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:47.109Z,1520546567.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:47.145Z,1520546567.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:47.480Z,1520546567.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:47.525Z,1520546567.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:47.886Z,1520546567.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:47.917Z,1520546567.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:48.305Z,1520546568.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:48.331Z,1520546568.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:48.685Z,1520546568.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:48.731Z,1520546568.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:49.098Z,1520546569.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:49.123Z,1520546569.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:49.500Z,1520546569.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:49.540Z,1520546569.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:49.913Z,1520546569.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:49.928Z,1520546569.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:50.305Z,1520546570.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:50.338Z,1520546570.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:50.690Z,1520546570.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:50.723Z,1520546570.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:51.080Z,1520546571.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:51.123Z,1520546571.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:51.491Z,1520546571.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:51.522Z,1520546571.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:51.886Z,1520546571.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:51.923Z,1520546571.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:52.310Z,1520546572.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:52.330Z,1520546572.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:52.710Z,1520546572.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:52.732Z,1520546572.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:53.113Z,1520546573.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:53.128Z,1520546573.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:53.490Z,1520546573.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:53.523Z,1520546573.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:53.886Z,1520546573.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:53.921Z,1520546573.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:54.290Z,1520546574.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:54.334Z,1520546574.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:54.685Z,1520546574.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:54.721Z,1520546574.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:55.091Z,1520546575.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:55.107Z,1520546575.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:55.505Z,1520546575.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:55.542Z,1520546575.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:55.901Z,1520546575.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:55.930Z,1520546575.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:56.307Z,1520546576.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:56.331Z,1520546576.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:56.692Z,1520546576.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:56.736Z,1520546576.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:57.084Z,1520546577.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:57.122Z,1520546577.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:57.492Z,1520546577.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:57.513Z,1520546577.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:57.899Z,1520546577.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:57.916Z,1520546577.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:58.306Z,1520546578.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:58.346Z,1520546578.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:58.709Z,1520546578.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:58.736Z,1520546578.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:59.101Z,1520546579.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:59.134Z,1520546579.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:59.498Z,1520546579.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:59.515Z,1520546579.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:02:59.896Z,1520546579.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:02:59.942Z,1520546579.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:00.295Z,1520546580.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:00.323Z,1520546580.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:00.693Z,1520546580.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:00.714Z,1520546580.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:01.100Z,1520546581.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:01.116Z,1520546581.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:01.502Z,1520546581.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:01.543Z,1520546581.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:01.900Z,1520546581.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:01.920Z,1520546581.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:02.302Z,1520546582.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:02.321Z,1520546582.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:02.702Z,1520546582.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:02.718Z,1520546582.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:03.091Z,1520546583.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:03.144Z,1520546583.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:03.495Z,1520546583.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:03.510Z,1520546583.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:03.899Z,1520546583.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:03.920Z,1520546583.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:04.305Z,1520546584.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:04.320Z,1520546584.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:04.705Z,1520546584.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:04.745Z,1520546584.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:05.101Z,1520546585.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:05.120Z,1520546585.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:05.498Z,1520546585.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:05.518Z,1520546585.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:05.901Z,1520546585.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:05.917Z,1520546585.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:06.297Z,1520546586.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:06.344Z,1520546586.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:06.699Z,1520546586.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:06.718Z,1520546586.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:07.089Z,1520546587.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:07.123Z,1520546587.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:07.514Z,1520546587.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:07.530Z,1520546587.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:07.910Z,1520546587.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:07.954Z,1520546587.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:08.305Z,1520546588.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:08.325Z,1520546588.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:08.700Z,1520546588.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:08.721Z,1520546588.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:09.082Z,1520546589.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:09.122Z,1520546589.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:09.500Z,1520546589.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:09.515Z,1520546589.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:09.886Z,1520546589.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:09.927Z,1520546589.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:10.313Z,1520546590.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:10.328Z,1520546590.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:10.718Z,1520546590.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:10.734Z,1520546590.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:11.111Z,1520546591.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:11.155Z,1520546591.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:14.221Z,1520546594.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:14.237Z,1520546594.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:14.329Z,1520546594.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:14.354Z,1520546594.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:14.734Z,1520546594.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:14.769Z,1520546594.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:15.128Z,1520546595.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:15.143Z,1520546595.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:15.533Z,1520546595.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:15.564Z,1520546595.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:15.919Z,1520546595.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:15.968Z,1520546595.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:16.318Z,1520546596.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:16.367Z,1520546596.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:16.724Z,1520546596.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:16.741Z,1520546596.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:17.112Z,1520546597.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:17.128Z,1520546597.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:17.521Z,1520546597.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:17.544Z,1520546597.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:17.928Z,1520546597.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:17.944Z,1520546597.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:18.329Z,1520546598.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:18.345Z,1520546598.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:18.714Z,1520546598.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:18.729Z,1520546598.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:19.114Z,1520546599.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:19.146Z,1520546599.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:19.521Z,1520546599.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:19.537Z,1520546599.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:19.924Z,1520546599.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:19.939Z,1520546599.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:20.325Z,1520546600.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:20.341Z,1520546600.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:20.724Z,1520546600.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:20.743Z,1520546600.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:21.127Z,1520546601.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:21.143Z,1520546601.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:21.508Z,1520546601.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:21.535Z,1520546601.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:21.921Z,1520546601.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:21.936Z,1520546601.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:22.303Z,1520546602.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:22.339Z,1520546602.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:22.707Z,1520546602.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:22.739Z,1520546602.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:23.113Z,1520546603.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:23.140Z,1520546603.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:23.533Z,1520546603.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:23.549Z,1520546603.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:23.932Z,1520546603.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:23.948Z,1520546603.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:24.314Z,1520546604.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:24.351Z,1520546604.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:24.713Z,1520546604.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:24.740Z,1520546604.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:25.115Z,1520546605.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:25.142Z,1520546605.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:25.503Z,1520546605.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:25.542Z,1520546605.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:25.910Z,1520546605.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:25.946Z,1520546605.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:26.326Z,1520546606.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:26.346Z,1520546606.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:26.725Z,1520546606.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:26.746Z,1520546606.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:27.136Z,1520546607.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:27.151Z,1520546607.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:27.529Z,1520546607.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:27.550Z,1520546607.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:27.913Z,1520546607.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:27.940Z,1520546607.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:28.315Z,1520546608.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:28.342Z,1520546608.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:28.706Z,1520546608.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:28.742Z,1520546608.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:29.114Z,1520546609.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:29.154Z,1520546609.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:29.528Z,1520546609.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:29.543Z,1520546609.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:29.923Z,1520546609.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:29.945Z,1520546609.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:30.302Z,1520546610.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:30.341Z,1520546610.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:30.711Z,1520546610.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:30.743Z,1520546610.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:31.108Z,1520546611.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:31.136Z,1520546611.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:31.515Z,1520546611.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:31.553Z,1520546611.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:31.939Z,1520546611.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:31.955Z,1520546611.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:32.333Z,1520546612.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:32.348Z,1520546612.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:32.726Z,1520546612.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:32.741Z,1520546612.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:33.109Z,1520546613.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:33.143Z,1520546613.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:33.507Z,1520546613.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:33.541Z,1520546613.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:33.902Z,1520546613.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:33.941Z,1520546613.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:34.327Z,1520546614.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:34.347Z,1520546614.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:34.733Z,1520546614.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:34.748Z,1520546614.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:35.113Z,1520546615.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:35.150Z,1520546615.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:35.511Z,1520546615.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:35.542Z,1520546615.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:35.908Z,1520546615.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:35.936Z,1520546615.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:36.327Z,1520546616.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:36.358Z,1520546616.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:36.731Z,1520546616.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:36.751Z,1520546616.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:37.133Z,1520546617.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:37.149Z,1520546617.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:37.531Z,1520546617.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:37.546Z,1520546617.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:37.934Z,1520546617.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:37.949Z,1520546617.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:38.307Z,1520546618.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:38.342Z,1520546618.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:38.703Z,1520546618.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:38.741Z,1520546618.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:39.113Z,1520546619.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:39.140Z,1520546619.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:39.522Z,1520546619.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:39.545Z,1520546619.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:39.933Z,1520546619.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:39.948Z,1520546619.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:40.334Z,1520546620.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:40.349Z,1520546620.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:40.708Z,1520546620.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:40.736Z,1520546620.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:41.104Z,1520546621.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:41.138Z,1520546621.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:41.511Z,1520546621.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:41.544Z,1520546621.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:41.934Z,1520546621.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:41.949Z,1520546621.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:42.325Z,1520546622.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:42.351Z,1520546622.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:42.743Z,1520546622.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:42.800Z,1520546622.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:43.117Z,1520546623.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:43.147Z,1520546623.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:43.508Z,1520546623.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:43.550Z,1520546623.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:43.923Z,1520546623.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:43.954Z,1520546623.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:44.325Z,1520546624.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:44.360Z,1520546624.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:44.715Z,1520546624.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:44.774Z,1520546624.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:45.124Z,1520546625.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:45.166Z,1520546625.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:45.527Z,1520546625.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:45.563Z,1520546625.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:45.922Z,1520546625.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:45.942Z,1520546625.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:46.326Z,1520546626.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:46.345Z,1520546626.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:46.729Z,1520546626.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:46.773Z,1520546626.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:47.131Z,1520546627.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:47.183Z,1520546627.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:47.526Z,1520546627.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:47.541Z,1520546627.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:47.922Z,1520546627.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:47.946Z,1520546627.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:48.323Z,1520546628.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:48.338Z,1520546628.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:48.723Z,1520546628.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:48.739Z,1520546628.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:49.129Z,1520546629.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:49.145Z,1520546629.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:49.529Z,1520546629.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:49.546Z,1520546629.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:49.933Z,1520546629.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:49.948Z,1520546629.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:50.322Z,1520546630.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:50.337Z,1520546630.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:50.717Z,1520546630.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:50.744Z,1520546630.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:51.121Z,1520546631.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:51.142Z,1520546631.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:51.532Z,1520546631.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:51.547Z,1520546631.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:51.933Z,1520546631.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:51.948Z,1520546631.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:52.328Z,1520546632.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:52.351Z,1520546632.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:52.720Z,1520546632.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:52.758Z,1520546632.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:53.126Z,1520546633.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:53.152Z,1520546633.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:53.526Z,1520546633.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:53.541Z,1520546633.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:53.913Z,1520546633.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:53.945Z,1520546633.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:54.334Z,1520546634.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:54.349Z,1520546634.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:54.728Z,1520546634.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:54.752Z,1520546634.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:55.124Z,1520546635.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:55.154Z,1520546635.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:55.517Z,1520546635.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:55.544Z,1520546635.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:55.907Z,1520546635.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:56.103Z,1520546636.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:56.311Z,1520546636.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:56.343Z,1520546636.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:56.714Z,1520546636.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:56.739Z,1520546636.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:57.115Z,1520546637.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:57.143Z,1520546637.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:57.538Z,1520546637.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:57.553Z,1520546637.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:57.919Z,1520546637.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:57.951Z,1520546637.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:58.314Z,1520546638.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:58.341Z,1520546638.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:58.709Z,1520546638.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:58.743Z,1520546638.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:59.121Z,1520546639.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:59.152Z,1520546639.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:59.519Z,1520546639.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:59.547Z,1520546639.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:03:59.920Z,1520546639.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:03:59.945Z,1520546639.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:00.309Z,1520546640.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:00.346Z,1520546640.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:00.701Z,1520546640.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:00.754Z,1520546640.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:01.115Z,1520546641.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:01.147Z,1520546641.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:01.526Z,1520546641.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:01.558Z,1520546641.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:01.915Z,1520546641.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:01.934Z,1520546641.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:02.327Z,1520546642.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:02.353Z,1520546642.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:02.721Z,1520546642.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:02.754Z,1520546642.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:03.109Z,1520546643.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:03.126Z,1520546643.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:03.521Z,1520546643.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:03.552Z,1520546643.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:03.914Z,1520546643.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:03.955Z,1520546643.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:04.324Z,1520546644.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:04.356Z,1520546644.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:04.730Z,1520546644.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:04.758Z,1520546644.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:05.125Z,1520546645.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:05.140Z,1520546645.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:05.515Z,1520546645.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:05.559Z,1520546645.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:05.917Z,1520546645.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:05.962Z,1520546645.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:06.317Z,1520546646.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:06.332Z,1520546646.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:06.716Z,1520546646.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:06.747Z,1520546646.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:07.124Z,1520546647.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:07.147Z,1520546647.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:07.527Z,1520546647.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:07.542Z,1520546647.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:07.929Z,1520546647.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:07.945Z,1520546647.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:08.326Z,1520546648.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:08.347Z,1520546648.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:08.718Z,1520546648.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:08.747Z,1520546648.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:09.100Z,1520546649.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:09.146Z,1520546649.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:09.524Z,1520546649.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:09.563Z,1520546649.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:09.921Z,1520546649.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:09.936Z,1520546649.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:10.327Z,1520546650.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:10.345Z,1520546650.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:10.724Z,1520546650.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:10.740Z,1520546650.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:11.129Z,1520546651.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:11.150Z,1520546651.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:14.242Z,1520546654.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:14.272Z,1520546654.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:14.366Z,1520546654.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:14.381Z,1520546654.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:14.741Z,1520546654.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:14.773Z,1520546654.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:15.142Z,1520546655.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:15.178Z,1520546655.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:15.535Z,1520546655.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:15.550Z,1520546655.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:15.932Z,1520546655.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:15.947Z,1520546655.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:16.327Z,1520546656.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:16.342Z,1520546656.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:16.726Z,1520546656.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:16.748Z,1520546656.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:17.142Z,1520546657.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:17.178Z,1520546657.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:17.532Z,1520546657.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:17.547Z,1520546657.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:17.933Z,1520546657.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:17.949Z,1520546657.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:18.331Z,1520546658.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:18.347Z,1520546658.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:18.730Z,1520546658.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:18.745Z,1520546658.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:19.145Z,1520546659.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:19.175Z,1520546659.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:19.533Z,1520546659.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:19.549Z,1520546659.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:19.943Z,1520546659.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:19.979Z,1520546659.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:20.331Z,1520546660.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:20.350Z,1520546660.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:20.732Z,1520546660.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:20.747Z,1520546660.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:21.133Z,1520546661.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:21.148Z,1520546661.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:21.543Z,1520546661.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:21.574Z,1520546661.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:21.946Z,1520546661.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:21.995Z,1520546661.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:22.334Z,1520546662.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:22.349Z,1520546662.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:22.729Z,1520546662.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:22.820Z,1520546662.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:23.136Z,1520546663.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:23.152Z,1520546663.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:23.545Z,1520546663.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:23.577Z,1520546663.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:23.928Z,1520546663.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:23.963Z,1520546663.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:24.331Z,1520546664.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:24.354Z,1520546664.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:24.737Z,1520546664.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:24.752Z,1520546664.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:25.136Z,1520546665.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:25.152Z,1520546665.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:25.538Z,1520546665.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:25.553Z,1520546665.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:25.938Z,1520546665.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:25.958Z,1520546665.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:26.331Z,1520546666.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:26.348Z,1520546666.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:26.725Z,1520546666.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:26.758Z,1520546666.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:27.138Z,1520546667.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:27.154Z,1520546667.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:27.538Z,1520546667.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:27.554Z,1520546667.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:27.938Z,1520546667.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:27.955Z,1520546667.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:28.322Z,1520546668.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:28.351Z,1520546668.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:28.719Z,1520546668.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:28.754Z,1520546668.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:29.141Z,1520546669.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:29.157Z,1520546669.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:29.542Z,1520546669.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:29.557Z,1520546669.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:29.935Z,1520546669.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:29.957Z,1520546669.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:30.326Z,1520546670.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:30.353Z,1520546670.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:30.717Z,1520546670.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:30.752Z,1520546670.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:31.135Z,1520546671.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:31.163Z,1520546671.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:31.547Z,1520546671.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:31.562Z,1520546671.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:31.938Z,1520546671.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:31.953Z,1520546671.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:32.327Z,1520546672.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:32.354Z,1520546672.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:32.718Z,1520546672.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:32.752Z,1520546672.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:33.144Z,1520546673.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:33.195Z,1520546673.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:33.533Z,1520546673.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:33.556Z,1520546673.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:33.941Z,1520546673.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:33.956Z,1520546673.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:34.320Z,1520546674.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:34.352Z,1520546674.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:34.712Z,1520546674.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:34.740Z,1520546674.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:35.145Z,1520546675.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:35.160Z,1520546675.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:35.542Z,1520546675.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:35.557Z,1520546675.557 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:35.557Z,1520546675.557 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 286
2018-03-08T22:04:35.557Z,1520546675.557 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T22:04:35.559Z,1520546675.559 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:35.559Z,1520546675.559 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 286
2018-03-08T22:04:35.559Z,1520546675.559 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T22:04:35.561Z,1520546675.561 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:35.561Z,1520546675.561 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 286
2018-03-08T22:04:35.561Z,1520546675.561 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T22:04:35.572Z,1520546675.572 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T22:04:35.573Z,1520546675.573 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T22:04:35.574Z,1520546675.574 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T22:04:35.933Z,1520546675.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:35.977Z,1520546675.977 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T22:04:35.977Z,1520546675.977 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 286
2018-03-08T22:04:35.978Z,1520546675.978 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T22:04:35.978Z,1520546675.978 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 286
2018-03-08T22:04:35.978Z,1520546675.978 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T22:04:35.978Z,1520546675.978 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 286
2018-03-08T22:04:36.321Z,1520546676.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:36.354Z,1520546676.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T22:04:36.354Z,1520546676.354 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:04:36.354Z,1520546676.354 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:04:36.355Z,1520546676.355 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T22:04:36.355Z,1520546676.355 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:04:36.356Z,1520546676.356 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:04:36.356Z,1520546676.356 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T22:04:36.361Z,1520546676.361 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:04:36.361Z,1520546676.361 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:04:36.728Z,1520546676.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:36.755Z,1520546676.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T22:04:36.756Z,1520546676.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:37.133Z,1520546677.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:37.159Z,1520546677.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T22:04:37.159Z,1520546677.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:37.549Z,1520546677.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:37.563Z,1520546677.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T22:04:37.565Z,1520546677.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:37.942Z,1520546677.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:37.962Z,1520546677.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T22:04:37.963Z,1520546677.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:38.329Z,1520546678.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:38.352Z,1520546678.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T22:04:38.353Z,1520546678.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:38.725Z,1520546678.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:38.752Z,1520546678.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T22:04:38.753Z,1520546678.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:39.140Z,1520546679.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:39.170Z,1520546679.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T22:04:39.171Z,1520546679.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:39.532Z,1520546679.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:39.561Z,1520546679.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T22:04:39.562Z,1520546679.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:39.949Z,1520546679.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:39.964Z,1520546679.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T22:04:39.965Z,1520546679.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:40.320Z,1520546680.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:40.335Z,1520546680.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T22:04:40.336Z,1520546680.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:40.720Z,1520546680.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:40.769Z,1520546680.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T22:04:40.770Z,1520546680.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:41.129Z,1520546681.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:41.166Z,1520546681.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T22:04:41.167Z,1520546681.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:41.541Z,1520546681.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:41.566Z,1520546681.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T22:04:41.567Z,1520546681.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:41.937Z,1520546681.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:41.958Z,1520546681.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T22:04:41.958Z,1520546681.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:42.340Z,1520546682.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:42.366Z,1520546682.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T22:04:42.367Z,1520546682.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:42.726Z,1520546682.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:42.740Z,1520546682.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T22:04:42.741Z,1520546682.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:43.122Z,1520546683.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:43.143Z,1520546683.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T22:04:43.144Z,1520546683.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:43.528Z,1520546683.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:43.543Z,1520546683.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T22:04:43.544Z,1520546683.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:43.925Z,1520546683.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:43.943Z,1520546683.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T22:04:43.944Z,1520546683.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:44.341Z,1520546684.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:44.370Z,1520546684.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T22:04:44.371Z,1520546684.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:44.734Z,1520546684.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:44.749Z,1520546684.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T22:04:44.749Z,1520546684.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:45.141Z,1520546685.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:45.173Z,1520546685.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T22:04:45.174Z,1520546685.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:45.520Z,1520546685.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:45.563Z,1520546685.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T22:04:45.564Z,1520546685.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:45.928Z,1520546685.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:45.965Z,1520546685.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T22:04:45.966Z,1520546685.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:46.331Z,1520546686.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:46.346Z,1520546686.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T22:04:46.347Z,1520546686.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:46.726Z,1520546686.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:46.741Z,1520546686.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T22:04:46.742Z,1520546686.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:47.133Z,1520546687.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:47.148Z,1520546687.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T22:04:47.149Z,1520546687.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:47.541Z,1520546687.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:47.555Z,1520546687.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T22:04:47.579Z,1520546687.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:47.930Z,1520546687.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:47.954Z,1520546687.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T22:04:47.955Z,1520546687.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:48.331Z,1520546688.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:48.346Z,1520546688.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T22:04:48.347Z,1520546688.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:48.734Z,1520546688.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:48.749Z,1520546688.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T22:04:48.750Z,1520546688.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:49.140Z,1520546689.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:49.155Z,1520546689.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T22:04:49.156Z,1520546689.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:49.536Z,1520546689.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:49.558Z,1520546689.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T22:04:49.559Z,1520546689.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:49.936Z,1520546689.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:49.951Z,1520546689.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T22:04:49.952Z,1520546689.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:50.334Z,1520546690.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:50.349Z,1520546690.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T22:04:50.350Z,1520546690.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:50.723Z,1520546690.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:50.750Z,1520546690.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T22:04:50.751Z,1520546690.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:51.138Z,1520546691.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:51.153Z,1520546691.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T22:04:51.153Z,1520546691.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:51.541Z,1520546691.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:51.556Z,1520546691.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T22:04:51.557Z,1520546691.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:51.941Z,1520546691.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:51.955Z,1520546691.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T22:04:51.957Z,1520546691.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:52.322Z,1520546692.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:52.349Z,1520546692.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T22:04:52.350Z,1520546692.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:52.719Z,1520546692.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:52.754Z,1520546692.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T22:04:52.755Z,1520546692.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:53.141Z,1520546693.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:53.156Z,1520546693.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T22:04:53.157Z,1520546693.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:53.546Z,1520546693.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:53.561Z,1520546693.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T22:04:53.562Z,1520546693.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:53.934Z,1520546693.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:53.953Z,1520546693.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T22:04:53.954Z,1520546693.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:54.322Z,1520546694.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:54.354Z,1520546694.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T22:04:54.355Z,1520546694.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:54.722Z,1520546694.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:54.749Z,1520546694.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T22:04:54.750Z,1520546694.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:55.137Z,1520546695.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:55.160Z,1520546695.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T22:04:55.161Z,1520546695.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:55.543Z,1520546695.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:55.562Z,1520546695.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:55.948Z,1520546695.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:55.963Z,1520546695.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:56.322Z,1520546696.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:56.348Z,1520546696.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:56.718Z,1520546696.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:56.749Z,1520546696.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:57.133Z,1520546697.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:57.155Z,1520546697.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:57.536Z,1520546697.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:57.557Z,1520546697.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:57.941Z,1520546697.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:57.956Z,1520546697.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:58.344Z,1520546698.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:58.359Z,1520546698.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:58.717Z,1520546698.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:58.752Z,1520546698.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:59.145Z,1520546699.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:59.160Z,1520546699.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:59.537Z,1520546699.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:59.561Z,1520546699.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:04:59.940Z,1520546699.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:04:59.956Z,1520546699.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:00.322Z,1520546700.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:00.349Z,1520546700.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:00.721Z,1520546700.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:00.750Z,1520546700.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:01.142Z,1520546701.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:01.161Z,1520546701.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:01.539Z,1520546701.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:01.562Z,1520546701.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:01.944Z,1520546701.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:01.959Z,1520546701.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:02.325Z,1520546702.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:02.358Z,1520546702.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:02.721Z,1520546702.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:02.744Z,1520546702.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:03.147Z,1520546703.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:03.162Z,1520546703.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:03.546Z,1520546703.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:03.566Z,1520546703.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:03.930Z,1520546703.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:03.967Z,1520546703.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:04.323Z,1520546704.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:04.355Z,1520546704.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:04.716Z,1520546704.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:04.762Z,1520546704.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:05.146Z,1520546705.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:05.178Z,1520546705.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:05.548Z,1520546705.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:05.563Z,1520546705.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:05.941Z,1520546705.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:05.957Z,1520546705.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:06.334Z,1520546706.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:06.363Z,1520546706.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:06.724Z,1520546706.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:06.756Z,1520546706.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:07.134Z,1520546707.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:07.166Z,1520546707.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:07.543Z,1520546707.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:07.562Z,1520546707.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:07.944Z,1520546707.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:07.966Z,1520546707.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:08.330Z,1520546708.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:08.355Z,1520546708.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:08.728Z,1520546708.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:08.755Z,1520546708.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:09.142Z,1520546709.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:09.159Z,1520546709.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:09.549Z,1520546709.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:09.565Z,1520546709.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:09.947Z,1520546709.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:09.963Z,1520546709.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:10.330Z,1520546710.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:10.355Z,1520546710.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:10.723Z,1520546710.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:10.764Z,1520546710.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:11.145Z,1520546711.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:11.161Z,1520546711.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:14.232Z,1520546714.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:14.262Z,1520546714.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:14.365Z,1520546714.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:14.381Z,1520546714.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:14.721Z,1520546714.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:14.757Z,1520546714.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:15.115Z,1520546715.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:15.130Z,1520546715.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:15.523Z,1520546715.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:15.538Z,1520546715.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:15.915Z,1520546715.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:15.959Z,1520546715.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:16.328Z,1520546716.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:16.361Z,1520546716.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:16.724Z,1520546716.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:16.739Z,1520546716.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:17.133Z,1520546717.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:17.164Z,1520546717.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:17.516Z,1520546717.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:17.543Z,1520546717.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:17.915Z,1520546717.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:17.934Z,1520546717.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:18.318Z,1520546718.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:18.345Z,1520546718.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:18.722Z,1520546718.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:18.738Z,1520546718.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:19.119Z,1520546719.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:19.158Z,1520546719.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:19.535Z,1520546719.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:19.566Z,1520546719.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:19.923Z,1520546719.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:19.964Z,1520546719.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:20.323Z,1520546720.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:20.339Z,1520546720.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:20.719Z,1520546720.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:20.759Z,1520546720.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:21.124Z,1520546721.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:21.166Z,1520546721.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:21.527Z,1520546721.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:21.543Z,1520546721.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:21.933Z,1520546721.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:21.948Z,1520546721.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:22.317Z,1520546722.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:22.343Z,1520546722.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:22.710Z,1520546722.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:22.743Z,1520546722.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:23.132Z,1520546723.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:23.147Z,1520546723.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:23.529Z,1520546723.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:23.544Z,1520546723.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:23.931Z,1520546723.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:23.947Z,1520546723.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:24.326Z,1520546724.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:24.343Z,1520546724.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:24.727Z,1520546724.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:24.742Z,1520546724.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:25.126Z,1520546725.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:25.141Z,1520546725.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:25.532Z,1520546725.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:25.548Z,1520546725.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:25.932Z,1520546725.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:25.951Z,1520546725.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:26.329Z,1520546726.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:26.344Z,1520546726.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:26.720Z,1520546726.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:26.736Z,1520546726.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:27.129Z,1520546727.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:27.147Z,1520546727.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:27.532Z,1520546727.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:27.547Z,1520546727.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:27.932Z,1520546727.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:27.947Z,1520546727.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:28.327Z,1520546728.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:28.342Z,1520546728.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:28.715Z,1520546728.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:28.755Z,1520546728.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:29.130Z,1520546729.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:29.168Z,1520546729.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:29.530Z,1520546729.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:29.554Z,1520546729.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:29.935Z,1520546729.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:29.955Z,1520546729.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:30.311Z,1520546730.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:30.343Z,1520546730.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:30.710Z,1520546730.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:30.744Z,1520546730.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:31.138Z,1520546731.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:31.159Z,1520546731.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:31.537Z,1520546731.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:31.552Z,1520546731.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:31.934Z,1520546731.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:31.950Z,1520546731.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:32.311Z,1520546732.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:32.342Z,1520546732.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:32.713Z,1520546732.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:32.739Z,1520546732.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:33.135Z,1520546733.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:33.151Z,1520546733.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:33.542Z,1520546733.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:33.557Z,1520546733.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:33.932Z,1520546733.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:33.947Z,1520546733.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:34.313Z,1520546734.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:34.352Z,1520546734.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:34.717Z,1520546734.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:34.751Z,1520546734.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:35.135Z,1520546735.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:35.150Z,1520546735.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:35.531Z,1520546735.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:35.567Z,1520546735.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:35.937Z,1520546735.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:35.952Z,1520546735.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:36.315Z,1520546736.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:36.342Z,1520546736.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:36.712Z,1520546736.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:36.827Z,1520546736.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:37.126Z,1520546737.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:37.146Z,1520546737.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:37.530Z,1520546737.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:37.545Z,1520546737.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:37.929Z,1520546737.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:37.945Z,1520546737.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:38.325Z,1520546738.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:38.344Z,1520546738.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:38.723Z,1520546738.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:38.738Z,1520546738.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:39.130Z,1520546739.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:39.145Z,1520546739.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:39.526Z,1520546739.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:39.547Z,1520546739.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:39.929Z,1520546739.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:39.947Z,1520546739.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:40.326Z,1520546740.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:40.346Z,1520546740.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:40.727Z,1520546740.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:40.747Z,1520546740.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:41.130Z,1520546741.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:41.146Z,1520546741.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:41.532Z,1520546741.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:41.548Z,1520546741.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:41.931Z,1520546741.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:41.947Z,1520546741.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:42.327Z,1520546742.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:42.342Z,1520546742.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:42.719Z,1520546742.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:42.734Z,1520546742.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:43.136Z,1520546743.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:43.160Z,1520546743.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:43.572Z,1520546743.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:43.594Z,1520546743.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:43.955Z,1520546743.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:43.986Z,1520546743.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:44.325Z,1520546744.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:44.349Z,1520546744.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:44.742Z,1520546744.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:44.762Z,1520546744.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:45.127Z,1520546745.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:45.171Z,1520546745.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:45.539Z,1520546745.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:45.561Z,1520546745.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:45.926Z,1520546745.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:45.964Z,1520546745.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:46.318Z,1520546746.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:46.354Z,1520546746.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:46.715Z,1520546746.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:46.746Z,1520546746.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:47.127Z,1520546747.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:47.169Z,1520546747.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:47.526Z,1520546747.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:47.555Z,1520546747.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:47.932Z,1520546747.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:47.962Z,1520546747.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:48.318Z,1520546748.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:48.335Z,1520546748.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:48.721Z,1520546748.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:48.736Z,1520546748.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:49.133Z,1520546749.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:49.174Z,1520546749.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:49.537Z,1520546749.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:49.567Z,1520546749.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:49.931Z,1520546749.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:49.961Z,1520546749.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:50.319Z,1520546750.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:50.334Z,1520546750.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:50.722Z,1520546750.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:50.738Z,1520546750.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:51.136Z,1520546751.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:51.164Z,1520546751.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:51.535Z,1520546751.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:51.563Z,1520546751.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:51.924Z,1520546751.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:51.939Z,1520546751.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:52.324Z,1520546752.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:52.339Z,1520546752.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:52.719Z,1520546752.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:52.766Z,1520546752.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:53.124Z,1520546753.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:53.162Z,1520546753.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:53.533Z,1520546753.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:53.566Z,1520546753.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:53.933Z,1520546753.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:53.963Z,1520546753.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:54.317Z,1520546754.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:54.362Z,1520546754.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:54.721Z,1520546754.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:54.758Z,1520546754.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:55.133Z,1520546755.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:55.163Z,1520546755.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:55.525Z,1520546755.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:55.540Z,1520546755.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:55.937Z,1520546755.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:55.961Z,1520546755.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:56.323Z,1520546756.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:56.343Z,1520546756.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:56.722Z,1520546756.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:56.737Z,1520546756.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:57.137Z,1520546757.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:57.161Z,1520546757.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:57.526Z,1520546757.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:57.563Z,1520546757.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:57.935Z,1520546757.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:57.962Z,1520546757.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:58.322Z,1520546758.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:58.337Z,1520546758.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:58.722Z,1520546758.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:58.743Z,1520546758.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:59.127Z,1520546759.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:59.145Z,1520546759.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:59.528Z,1520546759.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:59.543Z,1520546759.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:05:59.930Z,1520546759.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:05:59.945Z,1520546759.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:00.325Z,1520546760.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:00.340Z,1520546760.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:00.722Z,1520546760.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:00.742Z,1520546760.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:01.125Z,1520546761.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:01.141Z,1520546761.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:01.529Z,1520546761.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:01.544Z,1520546761.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:01.937Z,1520546761.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:01.952Z,1520546761.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:02.326Z,1520546762.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:02.345Z,1520546762.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:02.719Z,1520546762.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:02.736Z,1520546762.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:03.127Z,1520546763.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:03.142Z,1520546763.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:03.525Z,1520546763.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:03.540Z,1520546763.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:03.919Z,1520546763.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:03.967Z,1520546763.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:04.327Z,1520546764.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:04.365Z,1520546764.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:04.730Z,1520546764.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:04.745Z,1520546764.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:05.129Z,1520546765.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:05.144Z,1520546765.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:05.522Z,1520546765.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:05.551Z,1520546765.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:05.923Z,1520546765.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:05.939Z,1520546765.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:06.327Z,1520546766.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:06.346Z,1520546766.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:06.724Z,1520546766.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:06.739Z,1520546766.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:07.126Z,1520546767.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:07.145Z,1520546767.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:07.528Z,1520546767.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:07.543Z,1520546767.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:07.929Z,1520546767.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:07.944Z,1520546767.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:08.325Z,1520546768.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:08.340Z,1520546768.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:08.718Z,1520546768.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:08.766Z,1520546768.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:09.126Z,1520546769.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:09.165Z,1520546769.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:09.530Z,1520546769.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:09.545Z,1520546769.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:09.929Z,1520546769.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:09.945Z,1520546769.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:10.319Z,1520546770.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:10.347Z,1520546770.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:10.723Z,1520546770.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:10.763Z,1520546770.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:11.127Z,1520546771.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:11.143Z,1520546771.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:11.527Z,1520546771.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:11.542Z,1520546771.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:14.629Z,1520546774.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:14.645Z,1520546774.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:14.748Z,1520546774.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:14.781Z,1520546774.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:15.125Z,1520546775.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:15.148Z,1520546775.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:15.529Z,1520546775.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:15.544Z,1520546775.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:15.933Z,1520546775.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:15.948Z,1520546775.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:16.333Z,1520546776.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:16.354Z,1520546776.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:16.726Z,1520546776.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:16.746Z,1520546776.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:17.136Z,1520546777.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:17.158Z,1520546777.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:17.549Z,1520546777.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:17.600Z,1520546777.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:17.906Z,1520546777.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:17.933Z,1520546777.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:18.312Z,1520546778.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:18.372Z,1520546778.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:18.710Z,1520546778.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:18.759Z,1520546778.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:19.127Z,1520546779.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:19.142Z,1520546779.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:19.549Z,1520546779.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:19.580Z,1520546779.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:19.933Z,1520546779.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:19.954Z,1520546779.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:20.328Z,1520546780.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:20.343Z,1520546780.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:20.713Z,1520546780.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:20.741Z,1520546780.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:21.141Z,1520546781.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:21.162Z,1520546781.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:21.533Z,1520546781.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:21.549Z,1520546781.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:21.932Z,1520546781.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:21.947Z,1520546781.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:22.339Z,1520546782.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:22.353Z,1520546782.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:22.707Z,1520546782.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:22.743Z,1520546782.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:23.132Z,1520546783.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:23.154Z,1520546783.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:23.541Z,1520546783.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:23.562Z,1520546783.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:23.924Z,1520546783.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:23.959Z,1520546783.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:24.316Z,1520546784.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:24.343Z,1520546784.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:24.710Z,1520546784.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:24.747Z,1520546784.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:25.119Z,1520546785.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:25.158Z,1520546785.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:25.538Z,1520546785.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:25.554Z,1520546785.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:25.941Z,1520546785.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:25.962Z,1520546785.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:26.319Z,1520546786.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:26.349Z,1520546786.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:26.724Z,1520546786.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:26.751Z,1520546786.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:27.143Z,1520546787.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:27.159Z,1520546787.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:27.525Z,1520546787.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:27.554Z,1520546787.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:27.927Z,1520546787.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:27.954Z,1520546787.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:28.321Z,1520546788.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:28.346Z,1520546788.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:28.707Z,1520546788.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:28.741Z,1520546788.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:29.133Z,1520546789.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:29.155Z,1520546789.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:29.531Z,1520546789.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:29.562Z,1520546789.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:29.924Z,1520546789.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:29.957Z,1520546789.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:30.322Z,1520546790.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:30.338Z,1520546790.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:30.721Z,1520546790.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:30.735Z,1520546790.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:31.121Z,1520546791.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:31.162Z,1520546791.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:31.531Z,1520546791.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:31.566Z,1520546791.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:31.926Z,1520546791.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:31.963Z,1520546791.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:32.321Z,1520546792.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:32.336Z,1520546792.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:32.719Z,1520546792.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:32.766Z,1520546792.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:33.128Z,1520546793.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:33.162Z,1520546793.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:33.530Z,1520546793.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:33.563Z,1520546793.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:33.929Z,1520546793.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:33.961Z,1520546793.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:34.320Z,1520546794.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:34.359Z,1520546794.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:34.707Z,1520546794.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:34.753Z,1520546794.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:35.127Z,1520546795.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:35.162Z,1520546795.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:35.537Z,1520546795.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:35.566Z,1520546795.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:35.917Z,1520546795.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:35.957Z,1520546795.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:36.320Z,1520546796.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:36.362Z,1520546796.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:36.717Z,1520546796.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:36.754Z,1520546796.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:37.121Z,1520546797.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:37.137Z,1520546797.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:37.532Z,1520546797.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:37.560Z,1520546797.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:37.924Z,1520546797.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:37.939Z,1520546797.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:38.323Z,1520546798.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:38.339Z,1520546798.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:38.722Z,1520546798.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:38.742Z,1520546798.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:39.143Z,1520546799.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:39.171Z,1520546799.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:39.531Z,1520546799.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:39.548Z,1520546799.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:39.927Z,1520546799.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:39.943Z,1520546799.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:40.324Z,1520546800.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:40.340Z,1520546800.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:40.715Z,1520546800.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:40.750Z,1520546800.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:41.128Z,1520546801.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:41.144Z,1520546801.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:41.527Z,1520546801.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:41.553Z,1520546801.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:41.922Z,1520546801.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:41.949Z,1520546801.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:42.325Z,1520546802.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:42.344Z,1520546802.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:42.713Z,1520546802.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:42.744Z,1520546802.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:43.126Z,1520546803.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:43.150Z,1520546803.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:43.533Z,1520546803.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:43.548Z,1520546803.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:43.933Z,1520546803.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:43.985Z,1520546803.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:44.308Z,1520546804.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:44.351Z,1520546804.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:44.725Z,1520546804.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:44.741Z,1520546804.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:45.115Z,1520546805.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:45.142Z,1520546805.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:45.531Z,1520546805.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:45.548Z,1520546805.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:45.936Z,1520546805.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:45.951Z,1520546805.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:46.332Z,1520546806.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:46.347Z,1520546806.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:46.713Z,1520546806.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:46.740Z,1520546806.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:47.113Z,1520546807.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:47.160Z,1520546807.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:47.531Z,1520546807.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:47.547Z,1520546807.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:47.915Z,1520546807.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:47.950Z,1520546807.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:48.346Z,1520546808.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:48.390Z,1520546808.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:48.757Z,1520546808.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:48.773Z,1520546808.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:49.140Z,1520546809.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:49.155Z,1520546809.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:49.520Z,1520546809.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:49.555Z,1520546809.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:49.920Z,1520546809.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:49.951Z,1520546809.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:50.319Z,1520546810.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:50.358Z,1520546810.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:50.711Z,1520546810.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:50.758Z,1520546810.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:51.130Z,1520546811.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:51.170Z,1520546811.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:51.533Z,1520546811.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:51.559Z,1520546811.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:51.928Z,1520546811.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:51.952Z,1520546811.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:52.322Z,1520546812.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:52.346Z,1520546812.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:52.722Z,1520546812.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:52.759Z,1520546812.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:53.134Z,1520546813.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:53.162Z,1520546813.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:53.527Z,1520546813.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:53.545Z,1520546813.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:53.930Z,1520546813.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:53.945Z,1520546813.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:54.326Z,1520546814.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:54.342Z,1520546814.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:54.726Z,1520546814.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:54.746Z,1520546814.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:55.127Z,1520546815.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:55.146Z,1520546815.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:55.532Z,1520546815.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:55.548Z,1520546815.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:55.933Z,1520546815.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:55.950Z,1520546815.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:56.326Z,1520546816.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:56.341Z,1520546816.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:56.723Z,1520546816.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:56.743Z,1520546816.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:57.131Z,1520546817.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:57.147Z,1520546817.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:57.532Z,1520546817.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:57.548Z,1520546817.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:57.929Z,1520546817.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:57.944Z,1520546817.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:58.320Z,1520546818.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:58.371Z,1520546818.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:58.724Z,1520546818.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:58.771Z,1520546818.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:59.132Z,1520546819.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:59.148Z,1520546819.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:59.529Z,1520546819.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:59.544Z,1520546819.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:06:59.930Z,1520546819.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:06:59.947Z,1520546819.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:00.321Z,1520546820.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:00.338Z,1520546820.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:00.727Z,1520546820.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:00.745Z,1520546820.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:01.126Z,1520546821.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:01.141Z,1520546821.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:01.530Z,1520546821.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:01.547Z,1520546821.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:01.931Z,1520546821.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:01.946Z,1520546821.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:02.327Z,1520546822.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:02.347Z,1520546822.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:02.717Z,1520546822.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:02.738Z,1520546822.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:03.130Z,1520546823.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:03.147Z,1520546823.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:03.533Z,1520546823.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:03.549Z,1520546823.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:03.932Z,1520546823.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:03.948Z,1520546823.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:04.327Z,1520546824.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:04.343Z,1520546824.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:04.722Z,1520546824.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:04.771Z,1520546824.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:05.130Z,1520546825.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:05.169Z,1520546825.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:05.533Z,1520546825.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:05.548Z,1520546825.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:05.929Z,1520546825.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:05.945Z,1520546825.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:06.320Z,1520546826.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:06.354Z,1520546826.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:06.725Z,1520546826.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:06.771Z,1520546826.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:07.133Z,1520546827.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:07.157Z,1520546827.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:07.531Z,1520546827.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:07.547Z,1520546827.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:07.935Z,1520546827.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:07.954Z,1520546827.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:08.327Z,1520546828.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:08.343Z,1520546828.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:08.726Z,1520546828.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:08.741Z,1520546828.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:09.133Z,1520546829.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:09.154Z,1520546829.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:09.534Z,1520546829.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:09.550Z,1520546829.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:09.935Z,1520546829.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:09.950Z,1520546829.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:10.327Z,1520546830.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:10.342Z,1520546830.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:10.725Z,1520546830.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:10.740Z,1520546830.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:11.127Z,1520546831.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:11.145Z,1520546831.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:11.148Z,1520546831.148 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T22:07:11.148Z,1520546831.148 [Default:CheckIn:C.Wait] Stopped
2018-03-08T22:07:11.149Z,1520546831.149 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T22:07:11.149Z,1520546831.149 [Default:CheckIn:D] Running Loop=1
2018-03-08T22:07:11.536Z,1520546831.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:11.551Z,1520546831.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:11.554Z,1520546831.554 [Default:CheckIn:D] Stopped
2018-03-08T22:07:11.554Z,1520546831.554 [Default:CheckIn:E] Running Loop=1
2018-03-08T22:07:11.935Z,1520546831.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:11.954Z,1520546831.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:11.958Z,1520546831.958 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 861.445833 min 
2018-03-08T22:07:11.958Z,1520546831.958 [Default:CheckIn:E] Stopped
2018-03-08T22:07:11.958Z,1520546831.958 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T22:07:11.958Z,1520546831.958 [Default:CheckIn] Stopped
2018-03-08T22:07:11.958Z,1520546831.958 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T22:07:11.959Z,1520546831.959 [Default:CheckIn](INFO): Running loop #84
2018-03-08T22:07:11.959Z,1520546831.959 [Default:CheckIn] Running Loop=84
2018-03-08T22:07:11.959Z,1520546831.959 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T22:07:11.959Z,1520546831.959 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T22:07:15.023Z,1520546835.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:15.046Z,1520546835.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:15.147Z,1520546835.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:15.183Z,1520546835.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:15.515Z,1520546835.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:15.539Z,1520546835.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:15.925Z,1520546835.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:15.944Z,1520546835.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:16.313Z,1520546836.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:16.346Z,1520546836.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:16.702Z,1520546836.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:16.732Z,1520546836.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:17.105Z,1520546837.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:17.133Z,1520546837.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:17.511Z,1520546837.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:17.558Z,1520546837.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:17.903Z,1520546837.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:17.925Z,1520546837.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:18.320Z,1520546838.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:18.346Z,1520546838.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:18.718Z,1520546838.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:18.745Z,1520546838.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:19.105Z,1520546839.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:19.150Z,1520546839.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:19.500Z,1520546839.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:19.516Z,1520546839.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:19.904Z,1520546839.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:19.923Z,1520546839.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:20.305Z,1520546840.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:20.320Z,1520546840.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:20.700Z,1520546840.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:20.742Z,1520546840.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:21.103Z,1520546841.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:21.144Z,1520546841.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:21.519Z,1520546841.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:21.551Z,1520546841.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:21.915Z,1520546841.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:21.930Z,1520546841.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:22.310Z,1520546842.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:22.349Z,1520546842.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:22.702Z,1520546842.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:22.723Z,1520546842.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:23.108Z,1520546843.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:23.126Z,1520546843.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:23.505Z,1520546843.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:23.520Z,1520546843.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:23.906Z,1520546843.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:23.951Z,1520546843.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:24.309Z,1520546844.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:24.329Z,1520546844.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:24.712Z,1520546844.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:24.728Z,1520546844.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:25.115Z,1520546845.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:25.130Z,1520546845.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:25.497Z,1520546845.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:25.523Z,1520546845.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:25.901Z,1520546845.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:25.926Z,1520546845.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:26.308Z,1520546846.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:26.326Z,1520546846.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:26.714Z,1520546846.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:26.729Z,1520546846.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:27.100Z,1520546847.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:27.138Z,1520546847.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:27.512Z,1520546847.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:27.533Z,1520546847.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:27.916Z,1520546847.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:27.931Z,1520546847.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:28.316Z,1520546848.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:28.331Z,1520546848.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:28.703Z,1520546848.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:28.739Z,1520546848.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:29.109Z,1520546849.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:29.129Z,1520546849.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:29.510Z,1520546849.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:29.527Z,1520546849.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:29.911Z,1520546849.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:29.927Z,1520546849.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:30.315Z,1520546850.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:30.356Z,1520546850.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:30.709Z,1520546850.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:30.729Z,1520546850.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:31.115Z,1520546851.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:31.134Z,1520546851.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:31.512Z,1520546851.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:31.527Z,1520546851.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:31.900Z,1520546851.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:31.937Z,1520546851.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:32.306Z,1520546852.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:32.331Z,1520546852.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:32.709Z,1520546852.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:32.728Z,1520546852.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:33.102Z,1520546853.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:33.132Z,1520546853.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:33.516Z,1520546853.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:33.557Z,1520546853.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:33.917Z,1520546853.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:33.936Z,1520546853.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:34.317Z,1520546854.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:34.332Z,1520546854.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:34.710Z,1520546854.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:34.726Z,1520546854.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:35.091Z,1520546855.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:35.136Z,1520546855.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:35.508Z,1520546855.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:35.528Z,1520546855.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:35.909Z,1520546855.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:35.927Z,1520546855.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:36.322Z,1520546856.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:36.338Z,1520546856.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:36.710Z,1520546856.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:36.756Z,1520546856.756 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:36.757Z,1520546856.757 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 287
2018-03-08T22:07:36.757Z,1520546856.757 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T22:07:36.758Z,1520546856.758 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:36.758Z,1520546856.758 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 287
2018-03-08T22:07:36.759Z,1520546856.759 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T22:07:36.760Z,1520546856.760 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:36.760Z,1520546856.760 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 287
2018-03-08T22:07:36.760Z,1520546856.760 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T22:07:36.772Z,1520546856.772 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T22:07:36.773Z,1520546856.773 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T22:07:36.774Z,1520546856.773 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T22:07:37.121Z,1520546857.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:37.148Z,1520546857.148 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T22:07:37.148Z,1520546857.148 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 287
2018-03-08T22:07:37.157Z,1520546857.157 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T22:07:37.157Z,1520546857.157 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 287
2018-03-08T22:07:37.157Z,1520546857.157 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T22:07:37.157Z,1520546857.157 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 287
2018-03-08T22:07:37.494Z,1520546857.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:37.534Z,1520546857.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T22:07:37.534Z,1520546857.534 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:07:37.535Z,1520546857.535 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:07:37.535Z,1520546857.535 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T22:07:37.536Z,1520546857.536 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:07:37.536Z,1520546857.536 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:07:37.536Z,1520546857.536 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T22:07:37.537Z,1520546857.537 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:07:37.537Z,1520546857.537 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:07:37.896Z,1520546857.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:37.935Z,1520546857.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T22:07:37.936Z,1520546857.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:38.295Z,1520546858.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:38.328Z,1520546858.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T22:07:38.330Z,1520546858.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:38.695Z,1520546858.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:38.734Z,1520546858.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T22:07:38.735Z,1520546858.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:39.088Z,1520546859.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:39.103Z,1520546859.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.3 s old, using for 20.0 s.
2018-03-08T22:07:39.117Z,1520546859.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:39.517Z,1520546859.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:39.532Z,1520546859.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T22:07:39.533Z,1520546859.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:39.905Z,1520546859.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:39.943Z,1520546859.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T22:07:39.943Z,1520546859.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:40.322Z,1520546860.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:40.354Z,1520546860.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T22:07:40.355Z,1520546860.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:40.698Z,1520546860.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:40.734Z,1520546860.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T22:07:40.735Z,1520546860.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:41.095Z,1520546861.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:41.134Z,1520546861.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T22:07:41.135Z,1520546861.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:41.499Z,1520546861.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:41.531Z,1520546861.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T22:07:41.533Z,1520546861.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:41.895Z,1520546861.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:41.938Z,1520546861.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T22:07:41.939Z,1520546861.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:42.321Z,1520546862.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:42.375Z,1520546862.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T22:07:42.376Z,1520546862.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:42.719Z,1520546862.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:42.739Z,1520546862.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T22:07:42.739Z,1520546862.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:43.122Z,1520546863.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:43.155Z,1520546863.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T22:07:43.157Z,1520546863.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:43.495Z,1520546863.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:43.556Z,1520546863.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T22:07:43.557Z,1520546863.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:43.901Z,1520546863.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:43.951Z,1520546863.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T22:07:43.952Z,1520546863.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:44.305Z,1520546864.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:44.320Z,1520546864.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T22:07:44.321Z,1520546864.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:44.708Z,1520546864.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:44.746Z,1520546864.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T22:07:44.747Z,1520546864.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:45.106Z,1520546865.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:45.127Z,1520546865.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T22:07:45.127Z,1520546865.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:45.507Z,1520546865.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:45.525Z,1520546865.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T22:07:45.526Z,1520546865.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:45.927Z,1520546865.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:45.978Z,1520546865.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T22:07:45.979Z,1520546865.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:46.306Z,1520546866.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:46.346Z,1520546866.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T22:07:46.346Z,1520546866.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:46.701Z,1520546866.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:46.725Z,1520546866.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T22:07:46.726Z,1520546866.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:47.103Z,1520546867.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:47.129Z,1520546867.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T22:07:47.130Z,1520546867.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:47.505Z,1520546867.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:47.520Z,1520546867.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T22:07:47.521Z,1520546867.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:47.903Z,1520546867.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:47.947Z,1520546867.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T22:07:47.947Z,1520546867.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:48.305Z,1520546868.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:48.325Z,1520546868.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T22:07:48.326Z,1520546868.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:48.703Z,1520546868.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:48.724Z,1520546868.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T22:07:48.725Z,1520546868.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:49.118Z,1520546869.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:49.150Z,1520546869.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T22:07:49.150Z,1520546869.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:49.504Z,1520546869.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:49.550Z,1520546869.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T22:07:49.551Z,1520546869.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:49.895Z,1520546869.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:49.910Z,1520546869.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T22:07:49.911Z,1520546869.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:50.300Z,1520546870.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:50.329Z,1520546870.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T22:07:50.330Z,1520546870.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:50.707Z,1520546870.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:50.721Z,1520546870.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T22:07:50.722Z,1520546870.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:51.100Z,1520546871.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:51.145Z,1520546871.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T22:07:51.146Z,1520546871.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:51.505Z,1520546871.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:51.526Z,1520546871.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T22:07:51.527Z,1520546871.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:51.919Z,1520546871.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:51.953Z,1520546871.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T22:07:51.954Z,1520546871.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:52.318Z,1520546872.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:52.349Z,1520546872.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T22:07:52.350Z,1520546872.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:52.700Z,1520546872.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:52.742Z,1520546872.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T22:07:52.743Z,1520546872.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:53.103Z,1520546873.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:53.123Z,1520546873.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T22:07:53.124Z,1520546873.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:53.505Z,1520546873.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:53.525Z,1520546873.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T22:07:53.526Z,1520546873.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:53.908Z,1520546873.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:53.923Z,1520546873.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T22:07:53.924Z,1520546873.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:54.309Z,1520546874.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:54.353Z,1520546874.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T22:07:54.354Z,1520546874.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:54.703Z,1520546874.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:54.733Z,1520546874.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T22:07:54.734Z,1520546874.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:55.115Z,1520546875.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:55.134Z,1520546875.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T22:07:55.135Z,1520546875.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:55.511Z,1520546875.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:55.526Z,1520546875.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T22:07:55.527Z,1520546875.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:55.890Z,1520546875.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:55.955Z,1520546875.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T22:07:55.956Z,1520546875.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:56.303Z,1520546876.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:56.322Z,1520546876.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T22:07:56.324Z,1520546876.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:56.691Z,1520546876.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:56.730Z,1520546876.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T22:07:56.731Z,1520546876.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:57.088Z,1520546877.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:57.131Z,1520546877.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:57.517Z,1520546877.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:57.557Z,1520546877.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:57.911Z,1520546877.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:57.936Z,1520546877.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:58.321Z,1520546878.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:58.336Z,1520546878.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:58.710Z,1520546878.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:58.730Z,1520546878.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:59.107Z,1520546879.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:59.136Z,1520546879.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:59.493Z,1520546879.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:59.524Z,1520546879.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:07:59.894Z,1520546879.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:07:59.925Z,1520546879.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:00.318Z,1520546880.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:00.334Z,1520546880.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:00.710Z,1520546880.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:00.755Z,1520546880.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:01.112Z,1520546881.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:01.137Z,1520546881.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:01.511Z,1520546881.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:01.528Z,1520546881.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:01.892Z,1520546881.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:01.925Z,1520546881.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:02.298Z,1520546882.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:02.342Z,1520546882.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:02.699Z,1520546882.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:02.731Z,1520546882.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:03.088Z,1520546883.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:03.131Z,1520546883.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:03.519Z,1520546883.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:03.535Z,1520546883.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:03.919Z,1520546883.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:03.947Z,1520546883.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:04.305Z,1520546884.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:04.354Z,1520546884.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:04.698Z,1520546884.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:04.734Z,1520546884.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:05.100Z,1520546885.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:05.140Z,1520546885.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:05.499Z,1520546885.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:05.528Z,1520546885.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:05.899Z,1520546885.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:05.934Z,1520546885.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:06.317Z,1520546886.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:06.339Z,1520546886.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:06.711Z,1520546886.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:06.743Z,1520546886.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:07.109Z,1520546887.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:07.142Z,1520546887.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:07.502Z,1520546887.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:07.544Z,1520546887.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:07.890Z,1520546887.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:07.919Z,1520546887.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:08.302Z,1520546888.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:08.331Z,1520546888.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:08.704Z,1520546888.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:08.747Z,1520546888.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:09.094Z,1520546889.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:09.118Z,1520546889.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:09.518Z,1520546889.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:09.546Z,1520546889.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:09.919Z,1520546889.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:09.949Z,1520546889.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:10.318Z,1520546890.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:10.347Z,1520546890.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:10.701Z,1520546890.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:10.733Z,1520546890.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:11.103Z,1520546891.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:11.124Z,1520546891.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:11.506Z,1520546891.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:11.524Z,1520546891.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:11.910Z,1520546891.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:11.955Z,1520546891.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:12.305Z,1520546892.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:12.327Z,1520546892.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:15.669Z,1520546895.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:15.699Z,1520546895.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:15.792Z,1520546895.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:15.842Z,1520546895.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:16.158Z,1520546896.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:16.179Z,1520546896.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:16.555Z,1520546896.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:16.571Z,1520546896.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:16.962Z,1520546896.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:16.983Z,1520546896.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:17.365Z,1520546897.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:17.386Z,1520546897.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:17.761Z,1520546897.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:17.776Z,1520546897.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:18.161Z,1520546898.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:18.176Z,1520546898.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:18.559Z,1520546898.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:18.574Z,1520546898.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:18.952Z,1520546898.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:18.968Z,1520546898.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:19.364Z,1520546899.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:19.379Z,1520546899.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:19.760Z,1520546899.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:19.777Z,1520546899.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:20.164Z,1520546900.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:20.180Z,1520546900.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:20.565Z,1520546900.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:20.580Z,1520546900.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:20.965Z,1520546900.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:20.986Z,1520546900.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:21.354Z,1520546901.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:21.369Z,1520546901.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:21.749Z,1520546901.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:21.777Z,1520546901.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:22.169Z,1520546902.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:22.184Z,1520546902.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:22.557Z,1520546902.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:22.585Z,1520546902.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:22.972Z,1520546902.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:22.994Z,1520546902.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:23.361Z,1520546903.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:23.377Z,1520546903.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:23.745Z,1520546903.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:23.772Z,1520546903.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:24.165Z,1520546904.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:24.181Z,1520546904.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:24.569Z,1520546904.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:24.589Z,1520546904.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:24.958Z,1520546904.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:24.989Z,1520546904.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:25.361Z,1520546905.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:25.376Z,1520546905.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:25.747Z,1520546905.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:25.782Z,1520546905.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:26.157Z,1520546906.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:26.181Z,1520546906.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:26.569Z,1520546906.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:26.584Z,1520546906.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:26.966Z,1520546906.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:26.981Z,1520546906.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:27.349Z,1520546907.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:27.387Z,1520546907.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:27.751Z,1520546907.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:27.778Z,1520546907.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:28.165Z,1520546908.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:28.185Z,1520546908.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:28.565Z,1520546908.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:28.581Z,1520546908.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:28.965Z,1520546908.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:28.980Z,1520546908.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:29.348Z,1520546909.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:29.376Z,1520546909.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:29.751Z,1520546909.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:29.788Z,1520546909.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:30.174Z,1520546910.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:30.190Z,1520546910.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:30.569Z,1520546910.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:30.588Z,1520546910.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:30.986Z,1520546910.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:31.029Z,1520546911.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:31.347Z,1520546911.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:31.374Z,1520546911.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:31.751Z,1520546911.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:31.783Z,1520546911.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:32.149Z,1520546912.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:32.165Z,1520546912.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:32.552Z,1520546912.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:32.567Z,1520546912.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:32.953Z,1520546912.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:32.968Z,1520546912.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:33.365Z,1520546913.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:33.402Z,1520546913.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:33.765Z,1520546913.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:33.797Z,1520546913.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:34.170Z,1520546914.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:34.201Z,1520546914.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:34.559Z,1520546914.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:34.575Z,1520546914.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:34.959Z,1520546914.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:34.974Z,1520546914.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:35.360Z,1520546915.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:35.376Z,1520546915.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:35.755Z,1520546915.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:35.771Z,1520546915.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:36.160Z,1520546916.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:36.177Z,1520546916.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:36.563Z,1520546916.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:36.611Z,1520546916.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:36.964Z,1520546916.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:37.018Z,1520546917.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:37.355Z,1520546917.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:37.370Z,1520546917.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:37.759Z,1520546917.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:37.778Z,1520546917.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:38.165Z,1520546918.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:38.181Z,1520546918.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:38.565Z,1520546918.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:38.580Z,1520546918.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:38.966Z,1520546918.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:38.981Z,1520546918.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:39.360Z,1520546919.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:39.382Z,1520546919.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:39.758Z,1520546919.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:39.774Z,1520546919.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:40.161Z,1520546920.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:40.177Z,1520546920.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:40.560Z,1520546920.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:40.575Z,1520546920.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:40.961Z,1520546920.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:40.982Z,1520546920.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:41.357Z,1520546921.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:41.373Z,1520546921.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:41.760Z,1520546921.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:41.775Z,1520546921.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:42.165Z,1520546922.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:42.201Z,1520546922.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:42.566Z,1520546922.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:42.586Z,1520546922.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:42.966Z,1520546922.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:42.981Z,1520546922.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:43.360Z,1520546923.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:43.375Z,1520546923.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:43.753Z,1520546923.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:43.777Z,1520546923.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:44.169Z,1520546924.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:44.185Z,1520546924.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:44.568Z,1520546924.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:44.584Z,1520546924.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:44.969Z,1520546924.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:44.987Z,1520546924.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:45.360Z,1520546925.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:45.376Z,1520546925.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:45.755Z,1520546925.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:45.771Z,1520546925.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:46.166Z,1520546926.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:46.181Z,1520546926.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:46.568Z,1520546926.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:46.584Z,1520546926.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:46.968Z,1520546926.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:46.983Z,1520546926.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:47.361Z,1520546927.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:47.376Z,1520546927.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:47.759Z,1520546927.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:47.775Z,1520546927.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:48.161Z,1520546928.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:48.176Z,1520546928.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:48.569Z,1520546928.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:48.584Z,1520546928.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:48.965Z,1520546928.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:48.980Z,1520546928.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:49.356Z,1520546929.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:49.371Z,1520546929.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:49.753Z,1520546929.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:49.774Z,1520546929.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:50.158Z,1520546930.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:50.185Z,1520546930.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:50.572Z,1520546930.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:50.588Z,1520546930.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:50.969Z,1520546930.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:50.985Z,1520546930.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:51.348Z,1520546931.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:51.379Z,1520546931.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:51.747Z,1520546931.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:51.778Z,1520546931.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:52.166Z,1520546932.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:52.182Z,1520546932.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:52.572Z,1520546932.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:52.588Z,1520546932.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:52.961Z,1520546932.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:52.976Z,1520546932.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:53.348Z,1520546933.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:53.375Z,1520546933.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:53.751Z,1520546933.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:53.779Z,1520546933.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:54.164Z,1520546934.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:54.186Z,1520546934.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:54.570Z,1520546934.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:54.585Z,1520546934.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:54.973Z,1520546934.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:54.988Z,1520546934.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:55.344Z,1520546935.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:55.376Z,1520546935.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:55.751Z,1520546935.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:55.778Z,1520546935.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:56.153Z,1520546936.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:56.189Z,1520546936.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:56.573Z,1520546936.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:56.588Z,1520546936.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:56.967Z,1520546936.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:56.982Z,1520546936.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:57.344Z,1520546937.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:57.371Z,1520546937.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:57.747Z,1520546937.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:57.846Z,1520546937.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:58.171Z,1520546938.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:58.186Z,1520546938.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:58.565Z,1520546938.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:58.580Z,1520546938.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:58.957Z,1520546938.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:58.972Z,1520546938.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:59.350Z,1520546939.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:59.365Z,1520546939.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:08:59.745Z,1520546939.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:08:59.760Z,1520546939.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:00.165Z,1520546940.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:00.181Z,1520546940.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:00.606Z,1520546940.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:00.622Z,1520546940.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:00.957Z,1520546940.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:00.973Z,1520546940.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:01.351Z,1520546941.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:01.367Z,1520546941.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:01.747Z,1520546941.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:01.775Z,1520546941.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:02.157Z,1520546942.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:02.193Z,1520546942.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:02.570Z,1520546942.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:02.585Z,1520546942.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:02.965Z,1520546942.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:02.989Z,1520546942.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:03.348Z,1520546943.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:03.379Z,1520546943.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:03.751Z,1520546943.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:03.782Z,1520546943.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:04.165Z,1520546944.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:04.195Z,1520546944.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:04.561Z,1520546944.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:04.588Z,1520546944.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:04.958Z,1520546944.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:04.993Z,1520546944.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:05.352Z,1520546945.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:05.367Z,1520546945.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:05.751Z,1520546945.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:05.767Z,1520546945.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:06.165Z,1520546946.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:06.197Z,1520546946.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:06.565Z,1520546946.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:06.580Z,1520546946.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:06.970Z,1520546946.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:07.005Z,1520546947.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:07.359Z,1520546947.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:07.374Z,1520546947.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:07.761Z,1520546947.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:07.777Z,1520546947.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:08.160Z,1520546948.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:08.176Z,1520546948.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:08.565Z,1520546948.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:08.581Z,1520546948.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:08.965Z,1520546948.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:08.981Z,1520546948.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:09.359Z,1520546949.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:09.375Z,1520546949.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:09.751Z,1520546949.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:09.767Z,1520546949.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:10.161Z,1520546950.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:10.176Z,1520546950.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:10.565Z,1520546950.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:10.581Z,1520546950.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:10.960Z,1520546950.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:10.983Z,1520546950.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:11.360Z,1520546951.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:11.375Z,1520546951.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:11.759Z,1520546951.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:11.776Z,1520546951.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:12.165Z,1520546952.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:12.181Z,1520546952.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:12.565Z,1520546952.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:12.580Z,1520546952.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:15.669Z,1520546955.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:15.685Z,1520546955.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:15.784Z,1520546955.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:15.819Z,1520546955.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:16.168Z,1520546956.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:16.190Z,1520546956.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:16.569Z,1520546956.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:16.584Z,1520546956.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:16.967Z,1520546956.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:16.983Z,1520546956.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:17.381Z,1520546957.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:17.396Z,1520546957.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:17.781Z,1520546957.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:17.796Z,1520546957.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:18.173Z,1520546958.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:18.189Z,1520546958.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:18.568Z,1520546958.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:18.590Z,1520546958.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:18.969Z,1520546958.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:18.984Z,1520546958.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:19.370Z,1520546959.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:19.386Z,1520546959.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:19.771Z,1520546959.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:19.786Z,1520546959.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:20.173Z,1520546960.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:20.189Z,1520546960.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:20.572Z,1520546960.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:20.587Z,1520546960.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:20.973Z,1520546960.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:20.994Z,1520546960.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:21.371Z,1520546961.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:21.386Z,1520546961.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:21.770Z,1520546961.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:21.785Z,1520546961.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:22.173Z,1520546962.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:22.189Z,1520546962.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:22.573Z,1520546962.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:22.589Z,1520546962.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:22.978Z,1520546962.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:22.994Z,1520546962.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:23.360Z,1520546963.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:23.396Z,1520546963.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:23.763Z,1520546963.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:23.791Z,1520546963.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:24.183Z,1520546964.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:24.199Z,1520546964.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:24.582Z,1520546964.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:24.602Z,1520546964.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:24.982Z,1520546964.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:24.998Z,1520546964.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:25.359Z,1520546965.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:25.391Z,1520546965.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:25.762Z,1520546965.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:25.796Z,1520546965.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:26.182Z,1520546966.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:26.198Z,1520546966.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:26.582Z,1520546966.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:26.597Z,1520546966.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:26.969Z,1520546966.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:26.999Z,1520546966.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:27.363Z,1520546967.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:27.395Z,1520546967.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:27.762Z,1520546967.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:27.794Z,1520546967.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:28.174Z,1520546968.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:28.209Z,1520546968.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:28.586Z,1520546968.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:28.601Z,1520546968.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:28.969Z,1520546968.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:28.995Z,1520546968.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:29.359Z,1520546969.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:29.374Z,1520546969.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:29.762Z,1520546969.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:29.799Z,1520546969.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:30.173Z,1520546970.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:30.205Z,1520546970.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:30.581Z,1520546970.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:30.607Z,1520546970.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:30.977Z,1520546970.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:31.013Z,1520546971.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:31.368Z,1520546971.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:31.384Z,1520546971.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:31.767Z,1520546971.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:31.782Z,1520546971.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:32.182Z,1520546972.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:32.213Z,1520546972.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:32.581Z,1520546972.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:32.611Z,1520546972.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:32.970Z,1520546972.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:32.990Z,1520546972.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:33.368Z,1520546973.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:33.383Z,1520546973.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:33.768Z,1520546973.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:33.783Z,1520546973.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:34.182Z,1520546974.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:34.215Z,1520546974.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:34.573Z,1520546974.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:34.589Z,1520546974.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:34.982Z,1520546974.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:35.011Z,1520546975.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:35.366Z,1520546975.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:35.383Z,1520546975.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:35.769Z,1520546975.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:35.784Z,1520546975.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:36.168Z,1520546976.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:36.183Z,1520546976.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:36.568Z,1520546976.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:36.582Z,1520546976.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:36.967Z,1520546976.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:36.983Z,1520546976.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:37.381Z,1520546977.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:37.411Z,1520546977.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:37.773Z,1520546977.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:37.811Z,1520546977.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:38.173Z,1520546978.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:38.189Z,1520546978.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:38.568Z,1520546978.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:38.583Z,1520546978.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:38.967Z,1520546978.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:38.982Z,1520546978.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:39.366Z,1520546979.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:39.386Z,1520546979.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:39.767Z,1520546979.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:39.784Z,1520546979.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:40.182Z,1520546980.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:40.219Z,1520546980.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:40.569Z,1520546980.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:40.585Z,1520546980.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:40.981Z,1520546980.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:40.996Z,1520546980.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:41.371Z,1520546981.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:41.385Z,1520546981.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:41.771Z,1520546981.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:41.786Z,1520546981.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:42.169Z,1520546982.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:42.185Z,1520546982.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:42.571Z,1520546982.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:42.586Z,1520546982.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:42.973Z,1520546982.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:42.997Z,1520546982.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:43.379Z,1520546983.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:43.403Z,1520546983.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:43.784Z,1520546983.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:43.812Z,1520546983.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:44.179Z,1520546984.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:44.203Z,1520546984.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:44.558Z,1520546984.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:44.597Z,1520546984.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:44.959Z,1520546984.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:44.997Z,1520546984.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:45.373Z,1520546985.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:45.396Z,1520546985.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:45.772Z,1520546985.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:45.799Z,1520546985.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:46.175Z,1520546986.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:46.236Z,1520546986.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:46.576Z,1520546986.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:46.612Z,1520546986.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:46.973Z,1520546986.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:46.000Z,1520546987.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:47.361Z,1520546987.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:47.400Z,1520546987.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:47.753Z,1520546987.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:47.769Z,1520546987.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:48.170Z,1520546988.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:48.202Z,1520546988.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:48.574Z,1520546988.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:48.606Z,1520546988.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:48.970Z,1520546988.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:49.002Z,1520546989.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:49.368Z,1520546989.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:49.384Z,1520546989.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:49.768Z,1520546989.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:49.783Z,1520546989.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:50.169Z,1520546990.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:50.186Z,1520546990.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:50.577Z,1520546990.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:50.609Z,1520546990.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:50.981Z,1520546990.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:51.015Z,1520546991.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:51.364Z,1520546991.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:51.381Z,1520546991.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:51.767Z,1520546991.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:51.783Z,1520546991.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:52.168Z,1520546992.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:52.183Z,1520546992.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:52.568Z,1520546992.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:52.584Z,1520546992.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:52.966Z,1520546992.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:52.981Z,1520546992.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:53.381Z,1520546993.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:53.396Z,1520546993.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:53.768Z,1520546993.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:53.790Z,1520546993.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:54.169Z,1520546994.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:54.184Z,1520546994.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:54.568Z,1520546994.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:54.582Z,1520546994.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:54.955Z,1520546994.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:54.991Z,1520546994.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:55.370Z,1520546995.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:55.385Z,1520546995.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:55.771Z,1520546995.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:55.786Z,1520546995.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:56.172Z,1520546996.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:56.189Z,1520546996.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:56.573Z,1520546996.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:56.589Z,1520546996.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:56.973Z,1520546996.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:56.988Z,1520546996.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:57.370Z,1520546997.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:57.386Z,1520546997.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:57.766Z,1520546997.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:57.781Z,1520546997.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:58.173Z,1520546998.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:58.189Z,1520546998.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:58.570Z,1520546998.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:58.597Z,1520546998.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:58.978Z,1520546998.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:58.993Z,1520546998.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:59.372Z,1520546999.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:59.387Z,1520546999.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:09:59.753Z,1520546999.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:09:59.787Z,1520546999.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:00.181Z,1520547000.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:00.196Z,1520547000.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:00.581Z,1520547000.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:00.602Z,1520547000.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:00.978Z,1520547000.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:00.998Z,1520547000.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:01.372Z,1520547001.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:01.430Z,1520547001.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:01.776Z,1520547001.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:01.791Z,1520547001.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:02.176Z,1520547002.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:02.198Z,1520547002.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:02.580Z,1520547002.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:02.596Z,1520547002.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:02.981Z,1520547002.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:02.997Z,1520547002.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:03.372Z,1520547003.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:03.388Z,1520547003.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:03.767Z,1520547003.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:03.787Z,1520547003.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:04.179Z,1520547004.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:04.194Z,1520547004.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:04.583Z,1520547004.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:04.598Z,1520547004.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:04.975Z,1520547004.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:04.991Z,1520547004.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:05.363Z,1520547005.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:05.390Z,1520547005.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:05.756Z,1520547005.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:05.789Z,1520547005.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:06.178Z,1520547006.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:06.194Z,1520547006.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:06.582Z,1520547006.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:06.602Z,1520547006.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:06.977Z,1520547006.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:06.993Z,1520547006.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:07.359Z,1520547007.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:07.390Z,1520547007.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:07.762Z,1520547007.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:07.797Z,1520547007.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:08.169Z,1520547008.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:08.206Z,1520547008.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:08.593Z,1520547008.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:08.609Z,1520547008.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:08.969Z,1520547008.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:09.002Z,1520547009.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:09.363Z,1520547009.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:09.395Z,1520547009.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:09.762Z,1520547009.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:09.798Z,1520547009.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:10.173Z,1520547010.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:10.209Z,1520547010.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:10.570Z,1520547010.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:10.599Z,1520547010.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:10.969Z,1520547010.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:10.996Z,1520547010.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:11.359Z,1520547011.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:11.398Z,1520547011.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:11.764Z,1520547011.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:11.795Z,1520547011.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:12.173Z,1520547012.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:12.200Z,1520547012.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:12.573Z,1520547012.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:12.673Z,1520547012.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:16.034Z,1520547016.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:16.050Z,1520547016.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:16.159Z,1520547016.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:16.202Z,1520547016.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:16.517Z,1520547016.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:16.549Z,1520547016.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:16.903Z,1520547016.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:16.927Z,1520547016.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:17.308Z,1520547017.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:17.323Z,1520547017.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:17.702Z,1520547017.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:17.746Z,1520547017.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:18.104Z,1520547018.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:18.120Z,1520547018.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:18.521Z,1520547018.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:18.553Z,1520547018.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:18.918Z,1520547018.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:18.933Z,1520547018.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:19.313Z,1520547019.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:19.329Z,1520547019.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:19.707Z,1520547019.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:19.723Z,1520547019.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:20.112Z,1520547020.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:20.127Z,1520547020.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:20.511Z,1520547020.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:20.527Z,1520547020.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:20.911Z,1520547020.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:20.927Z,1520547020.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:21.314Z,1520547021.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:21.329Z,1520547021.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:21.712Z,1520547021.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:21.728Z,1520547021.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:22.112Z,1520547022.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:22.127Z,1520547022.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:22.510Z,1520547022.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:22.525Z,1520547022.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:22.904Z,1520547022.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:22.920Z,1520547022.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:23.310Z,1520547023.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:23.326Z,1520547023.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:23.709Z,1520547023.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:23.724Z,1520547023.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:24.103Z,1520547024.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:24.122Z,1520547024.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:24.513Z,1520547024.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:24.529Z,1520547024.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:24.913Z,1520547024.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:24.927Z,1520547024.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:25.312Z,1520547025.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:25.335Z,1520547025.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:25.710Z,1520547025.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:25.726Z,1520547025.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:26.107Z,1520547026.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:26.122Z,1520547026.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:26.510Z,1520547026.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:26.526Z,1520547026.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:26.910Z,1520547026.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:26.925Z,1520547026.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:27.316Z,1520547027.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:27.331Z,1520547027.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:27.712Z,1520547027.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:27.728Z,1520547027.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:28.116Z,1520547028.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:28.131Z,1520547028.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:28.512Z,1520547028.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:28.527Z,1520547028.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:28.892Z,1520547028.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:28.923Z,1520547028.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:29.309Z,1520547029.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:29.325Z,1520547029.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:29.707Z,1520547029.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:29.726Z,1520547029.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:30.096Z,1520547030.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:30.135Z,1520547030.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:30.521Z,1520547030.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:30.537Z,1520547030.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:30.920Z,1520547030.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:30.939Z,1520547030.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:31.309Z,1520547031.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:31.337Z,1520547031.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:31.710Z,1520547031.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:31.725Z,1520547031.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:32.098Z,1520547032.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:32.124Z,1520547032.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:32.511Z,1520547032.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:32.527Z,1520547032.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:32.898Z,1520547032.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:32.930Z,1520547032.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:33.322Z,1520547033.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:33.337Z,1520547033.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:33.715Z,1520547033.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:33.737Z,1520547033.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:34.114Z,1520547034.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:34.129Z,1520547034.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:34.498Z,1520547034.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:34.525Z,1520547034.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:34.893Z,1520547034.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:34.919Z,1520547034.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:35.301Z,1520547035.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:35.328Z,1520547035.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:35.700Z,1520547035.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:35.730Z,1520547035.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:36.093Z,1520547036.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:36.108Z,1520547036.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:36.521Z,1520547036.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:36.537Z,1520547036.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:36.923Z,1520547036.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:36.939Z,1520547036.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:37.323Z,1520547037.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:37.339Z,1520547037.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:37.698Z,1520547037.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:37.727Z,1520547037.727 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:37.727Z,1520547037.727 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 288
2018-03-08T22:10:37.727Z,1520547037.727 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T22:10:37.729Z,1520547037.729 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:37.730Z,1520547037.730 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 288
2018-03-08T22:10:37.730Z,1520547037.730 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T22:10:37.734Z,1520547037.734 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:37.734Z,1520547037.734 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 288
2018-03-08T22:10:37.734Z,1520547037.734 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T22:10:37.762Z,1520547037.762 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T22:10:37.762Z,1520547037.762 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T22:10:37.762Z,1520547037.762 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T22:10:38.103Z,1520547038.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:38.146Z,1520547038.146 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T22:10:38.146Z,1520547038.146 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 288
2018-03-08T22:10:38.146Z,1520547038.146 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T22:10:38.146Z,1520547038.146 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 288
2018-03-08T22:10:38.147Z,1520547038.147 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T22:10:38.147Z,1520547038.147 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 288
2018-03-08T22:10:38.502Z,1520547038.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:38.517Z,1520547038.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T22:10:38.517Z,1520547038.517 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:10:38.517Z,1520547038.517 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:10:38.518Z,1520547038.518 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T22:10:38.518Z,1520547038.518 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:10:38.518Z,1520547038.518 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:10:38.519Z,1520547038.519 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T22:10:38.519Z,1520547038.519 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:10:38.519Z,1520547038.519 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:10:38.905Z,1520547038.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:38.920Z,1520547038.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T22:10:38.921Z,1520547038.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:39.321Z,1520547039.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:39.358Z,1520547039.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T22:10:39.359Z,1520547039.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:39.707Z,1520547039.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:39.727Z,1520547039.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T22:10:39.727Z,1520547039.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:40.109Z,1520547040.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:40.124Z,1520547040.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T22:10:40.125Z,1520547040.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:40.506Z,1520547040.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:40.520Z,1520547040.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T22:10:40.521Z,1520547040.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:40.897Z,1520547040.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:40.918Z,1520547040.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T22:10:40.919Z,1520547040.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:41.307Z,1520547041.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:41.322Z,1520547041.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T22:10:41.323Z,1520547041.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:41.705Z,1520547041.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:41.722Z,1520547041.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T22:10:41.723Z,1520547041.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:42.102Z,1520547042.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:42.122Z,1520547042.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T22:10:42.123Z,1520547042.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:42.521Z,1520547042.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:42.553Z,1520547042.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T22:10:42.554Z,1520547042.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:42.917Z,1520547042.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:42.931Z,1520547042.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T22:10:42.932Z,1520547042.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:43.313Z,1520547043.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:43.329Z,1520547043.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T22:10:43.330Z,1520547043.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:43.710Z,1520547043.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:43.725Z,1520547043.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T22:10:43.726Z,1520547043.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:44.111Z,1520547044.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:44.126Z,1520547044.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T22:10:44.127Z,1520547044.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:44.509Z,1520547044.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:44.524Z,1520547044.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T22:10:44.525Z,1520547044.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:44.910Z,1520547044.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:44.925Z,1520547044.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T22:10:44.926Z,1520547044.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:45.313Z,1520547045.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:45.328Z,1520547045.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T22:10:45.329Z,1520547045.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:45.710Z,1520547045.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:45.730Z,1520547045.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T22:10:45.731Z,1520547045.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:46.114Z,1520547046.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:46.128Z,1520547046.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T22:10:46.129Z,1520547046.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:46.510Z,1520547046.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:46.530Z,1520547046.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T22:10:46.531Z,1520547046.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:46.907Z,1520547046.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:46.930Z,1520547046.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T22:10:46.931Z,1520547046.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:47.307Z,1520547047.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:47.322Z,1520547047.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T22:10:47.323Z,1520547047.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:47.716Z,1520547047.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:47.731Z,1520547047.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T22:10:47.732Z,1520547047.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:48.098Z,1520547048.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:48.134Z,1520547048.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T22:10:48.135Z,1520547048.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:48.534Z,1520547048.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:48.580Z,1520547048.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T22:10:48.581Z,1520547048.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:48.925Z,1520547048.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:48.944Z,1520547048.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T22:10:48.950Z,1520547048.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:49.309Z,1520547049.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:49.336Z,1520547049.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T22:10:49.337Z,1520547049.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:49.702Z,1520547049.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:49.734Z,1520547049.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T22:10:49.735Z,1520547049.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:50.098Z,1520547050.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:50.135Z,1520547050.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T22:10:50.136Z,1520547050.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:50.499Z,1520547050.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:50.530Z,1520547050.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T22:10:50.531Z,1520547050.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:50.901Z,1520547050.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:50.939Z,1520547050.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T22:10:50.940Z,1520547050.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:51.309Z,1520547051.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:51.336Z,1520547051.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T22:10:51.337Z,1520547051.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:51.713Z,1520547051.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:51.752Z,1520547051.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T22:10:51.753Z,1520547051.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:52.109Z,1520547052.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:52.135Z,1520547052.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T22:10:52.136Z,1520547052.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:52.498Z,1520547052.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:52.513Z,1520547052.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T22:10:52.514Z,1520547052.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:52.902Z,1520547052.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:52.942Z,1520547052.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T22:10:52.943Z,1520547052.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:53.303Z,1520547053.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:53.342Z,1520547053.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T22:10:53.343Z,1520547053.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:53.707Z,1520547053.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:53.723Z,1520547053.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T22:10:53.724Z,1520547053.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:54.101Z,1520547054.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:54.117Z,1520547054.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T22:10:54.118Z,1520547054.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:54.521Z,1520547054.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:54.551Z,1520547054.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T22:10:54.552Z,1520547054.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:54.921Z,1520547054.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:54.951Z,1520547054.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T22:10:54.952Z,1520547054.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:55.317Z,1520547055.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:55.332Z,1520547055.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T22:10:55.349Z,1520547055.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:55.708Z,1520547055.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:55.723Z,1520547055.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T22:10:55.724Z,1520547055.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:56.108Z,1520547056.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:56.123Z,1520547056.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T22:10:56.124Z,1520547056.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:56.506Z,1520547056.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:56.529Z,1520547056.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T22:10:56.530Z,1520547056.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:56.910Z,1520547056.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:56.925Z,1520547056.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T22:10:56.926Z,1520547056.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:57.313Z,1520547057.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:57.328Z,1520547057.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T22:10:57.329Z,1520547057.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:57.713Z,1520547057.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:57.729Z,1520547057.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:58.113Z,1520547058.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:58.129Z,1520547058.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:58.511Z,1520547058.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:58.527Z,1520547058.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:58.911Z,1520547058.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:58.927Z,1520547058.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:59.307Z,1520547059.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:59.323Z,1520547059.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:10:59.712Z,1520547059.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:10:59.727Z,1520547059.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:00.110Z,1520547060.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:00.125Z,1520547060.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:00.512Z,1520547060.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:00.529Z,1520547060.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:00.918Z,1520547060.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:00.934Z,1520547060.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:01.314Z,1520547061.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:01.330Z,1520547061.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:01.709Z,1520547061.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:01.725Z,1520547061.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:02.111Z,1520547062.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:02.127Z,1520547062.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:02.510Z,1520547062.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:02.526Z,1520547062.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:02.902Z,1520547062.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:02.917Z,1520547062.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:03.313Z,1520547063.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:03.331Z,1520547063.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:03.717Z,1520547063.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:03.734Z,1520547063.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:04.113Z,1520547064.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:04.128Z,1520547064.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:04.509Z,1520547064.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:04.525Z,1520547064.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:04.906Z,1520547064.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:04.922Z,1520547064.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:05.302Z,1520547065.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:05.318Z,1520547065.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:05.701Z,1520547065.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:05.729Z,1520547065.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:06.110Z,1520547066.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:06.131Z,1520547066.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:06.512Z,1520547066.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:06.528Z,1520547066.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:06.921Z,1520547066.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:06.937Z,1520547066.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:07.309Z,1520547067.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:07.331Z,1520547067.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:07.694Z,1520547067.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:07.726Z,1520547067.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:08.109Z,1520547068.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:08.124Z,1520547068.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:08.495Z,1520547068.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:08.527Z,1520547068.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:08.906Z,1520547068.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:08.921Z,1520547068.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:09.317Z,1520547069.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:09.339Z,1520547069.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:09.719Z,1520547069.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:09.735Z,1520547069.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:10.121Z,1520547070.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:10.137Z,1520547070.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:10.507Z,1520547070.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:10.522Z,1520547070.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:10.901Z,1520547070.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:10.934Z,1520547070.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:11.302Z,1520547071.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:11.329Z,1520547071.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:11.699Z,1520547071.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:11.726Z,1520547071.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:12.094Z,1520547072.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:12.132Z,1520547072.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:12.517Z,1520547072.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:12.532Z,1520547072.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:12.917Z,1520547072.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:12.945Z,1520547072.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:16.018Z,1520547076.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:16.033Z,1520547076.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:16.133Z,1520547076.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:16.177Z,1520547076.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:16.489Z,1520547076.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:16.504Z,1520547076.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:16.887Z,1520547076.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:16.903Z,1520547076.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:17.287Z,1520547077.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:17.303Z,1520547077.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:17.685Z,1520547077.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:17.706Z,1520547077.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:18.087Z,1520547078.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:18.102Z,1520547078.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:18.501Z,1520547078.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:18.531Z,1520547078.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:18.893Z,1520547078.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:18.908Z,1520547078.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:19.301Z,1520547079.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:19.332Z,1520547079.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:19.675Z,1520547079.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:19.699Z,1520547079.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:20.090Z,1520547080.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:20.105Z,1520547080.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:20.488Z,1520547080.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:20.503Z,1520547080.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:20.883Z,1520547080.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:20.899Z,1520547080.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:21.291Z,1520547081.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:21.311Z,1520547081.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:21.697Z,1520547081.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:21.712Z,1520547081.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:22.091Z,1520547082.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:22.107Z,1520547082.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:22.486Z,1520547082.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:22.502Z,1520547082.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:22.904Z,1520547082.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:22.919Z,1520547082.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:23.284Z,1520547083.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:23.300Z,1520547083.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:23.685Z,1520547083.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:23.704Z,1520547083.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:24.090Z,1520547084.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:24.105Z,1520547084.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:24.494Z,1520547084.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:24.510Z,1520547084.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:24.897Z,1520547084.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:24.912Z,1520547084.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:25.293Z,1520547085.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:25.310Z,1520547085.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:25.676Z,1520547085.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:25.707Z,1520547085.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:26.090Z,1520547086.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:26.111Z,1520547086.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:26.491Z,1520547086.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:26.506Z,1520547086.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:26.883Z,1520547086.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:26.902Z,1520547086.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:27.297Z,1520547087.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:27.318Z,1520547087.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:27.696Z,1520547087.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:27.711Z,1520547087.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:28.097Z,1520547088.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:28.112Z,1520547088.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:28.485Z,1520547088.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:28.501Z,1520547088.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:28.886Z,1520547088.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:28.901Z,1520547088.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:29.286Z,1520547089.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:29.306Z,1520547089.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:29.691Z,1520547089.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:29.706Z,1520547089.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:30.091Z,1520547090.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:30.106Z,1520547090.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:30.495Z,1520547090.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:30.511Z,1520547090.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:30.895Z,1520547090.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:30.914Z,1520547090.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:31.296Z,1520547091.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:31.312Z,1520547091.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:31.684Z,1520547091.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:31.700Z,1520547091.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:32.093Z,1520547092.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:32.108Z,1520547092.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:32.488Z,1520547092.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:32.503Z,1520547092.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:32.882Z,1520547092.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:32.902Z,1520547092.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:33.296Z,1520547093.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:33.311Z,1520547093.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:33.696Z,1520547093.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:33.711Z,1520547093.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:34.098Z,1520547094.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:34.118Z,1520547094.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:34.489Z,1520547094.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:34.510Z,1520547094.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:34.891Z,1520547094.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:34.906Z,1520547094.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:35.291Z,1520547095.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:35.310Z,1520547095.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:35.688Z,1520547095.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:35.703Z,1520547095.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:36.095Z,1520547096.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:36.110Z,1520547096.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:36.497Z,1520547096.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:36.512Z,1520547096.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:36.897Z,1520547096.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:36.913Z,1520547096.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:37.297Z,1520547097.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:37.318Z,1520547097.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:37.672Z,1520547097.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:37.703Z,1520547097.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:38.091Z,1520547098.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:38.110Z,1520547098.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:38.475Z,1520547098.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:38.508Z,1520547098.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:38.872Z,1520547098.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:38.909Z,1520547098.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:39.294Z,1520547099.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:39.324Z,1520547099.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:39.704Z,1520547099.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:39.719Z,1520547099.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:40.089Z,1520547100.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:40.121Z,1520547100.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:40.478Z,1520547100.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:40.515Z,1520547100.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:40.882Z,1520547100.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:40.911Z,1520547100.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:41.276Z,1520547101.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:41.307Z,1520547101.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:41.681Z,1520547101.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:41.722Z,1520547101.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:42.082Z,1520547102.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:42.114Z,1520547102.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:42.507Z,1520547102.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:42.532Z,1520547102.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:42.903Z,1520547102.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:42.927Z,1520547102.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:43.320Z,1520547103.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:43.368Z,1520547103.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:43.683Z,1520547103.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:43.727Z,1520547103.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:44.084Z,1520547104.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:44.107Z,1520547104.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:44.504Z,1520547104.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:44.540Z,1520547104.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:44.888Z,1520547104.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:44.903Z,1520547104.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:45.305Z,1520547105.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:45.338Z,1520547105.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:45.695Z,1520547105.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:45.746Z,1520547105.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:46.089Z,1520547106.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:46.105Z,1520547106.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:46.488Z,1520547106.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:46.503Z,1520547106.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:46.887Z,1520547106.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:46.902Z,1520547106.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:47.283Z,1520547107.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:47.298Z,1520547107.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:47.689Z,1520547107.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:47.704Z,1520547107.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:48.088Z,1520547108.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:48.102Z,1520547108.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:48.501Z,1520547108.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:48.533Z,1520547108.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:48.897Z,1520547108.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:48.912Z,1520547108.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:49.293Z,1520547109.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:49.314Z,1520547109.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:49.676Z,1520547109.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:49.699Z,1520547109.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:50.091Z,1520547110.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:50.106Z,1520547110.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:50.484Z,1520547110.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:50.506Z,1520547110.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:50.873Z,1520547110.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:50.908Z,1520547110.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:51.296Z,1520547111.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:51.311Z,1520547111.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:51.697Z,1520547111.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:51.712Z,1520547111.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:52.090Z,1520547112.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:52.105Z,1520547112.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:52.487Z,1520547112.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:52.503Z,1520547112.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:52.887Z,1520547112.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:52.903Z,1520547112.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:53.284Z,1520547113.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:53.300Z,1520547113.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:53.688Z,1520547113.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:53.704Z,1520547113.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:54.088Z,1520547114.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:54.103Z,1520547114.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:54.471Z,1520547114.471 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T22:11:54.471Z,1520547114.471 [NAL9602] Data Fault, FailCount= 5
2018-03-08T22:11:54.471Z,1520547114.471 [NAL9602](ERROR): Data Fault
2018-03-08T22:11:54.488Z,1520547114.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:54.503Z,1520547114.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:54.537Z,1520547114.537 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T22:11:54.538Z,1520547114.538 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-08T22:11:54.862Z,1520547114.862 [NAL9602](INFO): Powering down
2018-03-08T22:11:54.883Z,1520547114.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:54.911Z,1520547114.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:54.935Z,1520547114.935 [CBIT](INFO): Critical error at 20180308T221154
2018-03-08T22:11:55.289Z,1520547115.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:55.304Z,1520547115.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:55.683Z,1520547115.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:55.699Z,1520547115.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:56.085Z,1520547116.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:56.100Z,1520547116.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:56.488Z,1520547116.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:56.503Z,1520547116.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:56.882Z,1520547116.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:56.898Z,1520547116.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:57.285Z,1520547117.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:57.307Z,1520547117.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:57.688Z,1520547117.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:57.703Z,1520547117.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:58.079Z,1520547118.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:58.094Z,1520547118.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:58.485Z,1520547118.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:58.506Z,1520547118.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:58.887Z,1520547118.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:58.902Z,1520547118.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:59.281Z,1520547119.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:59.296Z,1520547119.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:11:59.685Z,1520547119.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:11:59.706Z,1520547119.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:00.087Z,1520547120.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:00.103Z,1520547120.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:00.481Z,1520547120.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:00.496Z,1520547120.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:00.885Z,1520547120.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:00.900Z,1520547120.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:01.286Z,1520547121.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:01.301Z,1520547121.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:01.674Z,1520547121.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:01.697Z,1520547121.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:02.085Z,1520547122.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:02.100Z,1520547122.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:02.485Z,1520547122.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:02.501Z,1520547122.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:02.882Z,1520547122.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:02.897Z,1520547122.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:03.285Z,1520547123.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:03.306Z,1520547123.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:03.689Z,1520547123.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:03.704Z,1520547123.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:03.737Z,1520547123.737 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T22:12:04.078Z,1520547124.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:04.093Z,1520547124.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:04.484Z,1520547124.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:04.499Z,1520547124.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:04.889Z,1520547124.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:04.905Z,1520547124.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:05.280Z,1520547125.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:05.295Z,1520547125.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:05.685Z,1520547125.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:05.700Z,1520547125.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:06.089Z,1520547126.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:06.104Z,1520547126.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:06.481Z,1520547126.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:06.496Z,1520547126.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:06.885Z,1520547126.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:06.903Z,1520547126.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:07.289Z,1520547127.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:07.304Z,1520547127.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:07.685Z,1520547127.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:07.701Z,1520547127.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:08.084Z,1520547128.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:08.098Z,1520547128.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:08.514Z,1520547128.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:08.563Z,1520547128.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:08.878Z,1520547128.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:08.894Z,1520547128.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:09.284Z,1520547129.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:09.298Z,1520547129.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:09.692Z,1520547129.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:09.707Z,1520547129.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:10.084Z,1520547130.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:10.106Z,1520547130.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:10.484Z,1520547130.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:10.625Z,1520547130.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:10.887Z,1520547130.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:10.903Z,1520547130.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:11.281Z,1520547131.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:11.297Z,1520547131.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:11.686Z,1520547131.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:11.706Z,1520547131.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:11.747Z,1520547131.747 [CBIT](INFO): Clearing failed state for component DropWeight
2018-03-08T22:12:11.747Z,1520547131.747 [DropWeight] No Fault, FailCount= 1
2018-03-08T22:12:12.087Z,1520547132.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:12.103Z,1520547132.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:12.106Z,1520547132.106 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T22:07:11.0Z
2018-03-08T22:12:12.107Z,1520547132.107 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T22:12:12.107Z,1520547132.107 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T22:12:12.482Z,1520547132.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:12.513Z,1520547132.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:12.985Z,1520547132.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:13.000Z,1520547133.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:13.290Z,1520547133.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:13.310Z,1520547133.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:16.502Z,1520547136.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:16.517Z,1520547136.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:16.616Z,1520547136.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:16.658Z,1520547136.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:16.973Z,1520547136.973 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180308T074127/Courier0336.lzma
2018-03-08T22:12:17.008Z,1520547137.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:17.031Z,1520547137.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:17.396Z,1520547137.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:17.411Z,1520547137.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:17.772Z,1520547137.772 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0336.lzma.bak
2018-03-08T22:12:17.772Z,1520547137.772 [DataOverHttps](INFO): SBD MOMSN=7989552
2018-03-08T22:12:17.801Z,1520547137.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:17.833Z,1520547137.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:18.397Z,1520547138.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:18.412Z,1520547138.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:18.597Z,1520547138.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:18.630Z,1520547138.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:21.697Z,1520547141.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:21.712Z,1520547141.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:21.816Z,1520547141.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:21.858Z,1520547141.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:22.170Z,1520547142.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:22.204Z,1520547142.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:22.586Z,1520547142.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:22.612Z,1520547142.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:22.963Z,1520547142.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:22.978Z,1520547142.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:23.367Z,1520547143.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:23.382Z,1520547143.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:23.767Z,1520547143.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:23.783Z,1520547143.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:26.866Z,1520547146.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:26.882Z,1520547146.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:26.980Z,1520547146.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:27.009Z,1520547147.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:27.346Z,1520547147.346 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180308T074127/Express0337.lzma
2018-03-08T22:12:27.370Z,1520547147.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:27.385Z,1520547147.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:27.764Z,1520547147.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:27.780Z,1520547147.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:28.140Z,1520547148.140 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0337.lzma.bak
2018-03-08T22:12:28.140Z,1520547148.140 [DataOverHttps](INFO): SBD MOMSN=7989555
2018-03-08T22:12:28.176Z,1520547148.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:28.218Z,1520547148.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:28.757Z,1520547148.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:28.772Z,1520547148.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:28.775Z,1520547148.775 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T22:12:28.775Z,1520547148.775 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T22:12:28.775Z,1520547148.775 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T22:12:28.965Z,1520547148.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:29.011Z,1520547149.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:32.066Z,1520547152.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:32.081Z,1520547152.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:32.172Z,1520547152.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:32.214Z,1520547152.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:32.539Z,1520547152.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:32.570Z,1520547152.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:32.925Z,1520547152.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:32.940Z,1520547152.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:33.335Z,1520547153.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:33.366Z,1520547153.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:33.738Z,1520547153.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:33.753Z,1520547153.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:34.128Z,1520547154.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:34.144Z,1520547154.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:34.535Z,1520547154.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:34.550Z,1520547154.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:34.936Z,1520547154.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:34.950Z,1520547154.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:35.331Z,1520547155.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:35.347Z,1520547155.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:35.727Z,1520547155.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:35.743Z,1520547155.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:36.133Z,1520547156.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:36.149Z,1520547156.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:36.533Z,1520547156.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:36.548Z,1520547156.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:36.931Z,1520547156.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:36.947Z,1520547156.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:37.332Z,1520547157.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:37.347Z,1520547157.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:37.735Z,1520547157.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:37.750Z,1520547157.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:38.127Z,1520547158.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:38.143Z,1520547158.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:38.532Z,1520547158.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:38.547Z,1520547158.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:38.938Z,1520547158.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:38.953Z,1520547158.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:39.333Z,1520547159.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:39.348Z,1520547159.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:39.733Z,1520547159.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:39.748Z,1520547159.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:40.135Z,1520547160.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:40.150Z,1520547160.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:40.535Z,1520547160.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:40.550Z,1520547160.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:40.935Z,1520547160.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:40.951Z,1520547160.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:41.331Z,1520547161.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:41.347Z,1520547161.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:41.727Z,1520547161.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:41.743Z,1520547161.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:42.135Z,1520547162.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:42.150Z,1520547162.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:42.536Z,1520547162.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:42.558Z,1520547162.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:42.927Z,1520547162.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:42.943Z,1520547162.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:43.332Z,1520547163.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:43.348Z,1520547163.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:43.733Z,1520547163.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:43.768Z,1520547163.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:44.127Z,1520547164.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:44.143Z,1520547164.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:44.534Z,1520547164.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:44.549Z,1520547164.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:44.936Z,1520547164.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:44.951Z,1520547164.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:45.335Z,1520547165.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:45.351Z,1520547165.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:45.735Z,1520547165.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:45.751Z,1520547165.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:46.134Z,1520547166.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:46.154Z,1520547166.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:46.534Z,1520547166.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:46.549Z,1520547166.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:46.958Z,1520547166.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:46.983Z,1520547166.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:47.336Z,1520547167.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:47.351Z,1520547167.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:47.732Z,1520547167.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:47.826Z,1520547167.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:48.133Z,1520547168.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:48.148Z,1520547168.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:48.534Z,1520547168.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:48.550Z,1520547168.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:48.929Z,1520547168.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:48.945Z,1520547168.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:49.333Z,1520547169.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:49.348Z,1520547169.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:49.734Z,1520547169.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:49.789Z,1520547169.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:50.127Z,1520547170.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:50.143Z,1520547170.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:50.534Z,1520547170.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:50.549Z,1520547170.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:50.936Z,1520547170.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:50.952Z,1520547170.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:51.332Z,1520547171.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:51.348Z,1520547171.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:51.727Z,1520547171.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:51.743Z,1520547171.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:52.126Z,1520547172.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:52.150Z,1520547172.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:52.526Z,1520547172.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:52.552Z,1520547172.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:52.933Z,1520547172.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:52.948Z,1520547172.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:53.336Z,1520547173.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:53.351Z,1520547173.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:53.735Z,1520547173.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:53.750Z,1520547173.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:54.135Z,1520547174.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:54.150Z,1520547174.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:54.536Z,1520547174.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:54.551Z,1520547174.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:54.936Z,1520547174.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:54.951Z,1520547174.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:55.336Z,1520547175.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:55.350Z,1520547175.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:55.732Z,1520547175.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:55.756Z,1520547175.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:56.130Z,1520547176.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:56.146Z,1520547176.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:56.538Z,1520547176.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:56.553Z,1520547176.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:56.935Z,1520547176.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:56.950Z,1520547176.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:57.338Z,1520547177.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:57.353Z,1520547177.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:57.739Z,1520547177.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:57.754Z,1520547177.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:58.131Z,1520547178.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:58.155Z,1520547178.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:58.538Z,1520547178.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:58.554Z,1520547178.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:58.936Z,1520547178.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:58.951Z,1520547178.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:59.340Z,1520547179.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:59.356Z,1520547179.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:12:59.739Z,1520547179.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:12:59.754Z,1520547179.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:00.136Z,1520547180.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:00.151Z,1520547180.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:00.539Z,1520547180.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:00.554Z,1520547180.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:00.949Z,1520547180.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:00.987Z,1520547180.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:01.333Z,1520547181.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:01.354Z,1520547181.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:01.731Z,1520547181.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:01.747Z,1520547181.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:02.133Z,1520547182.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:02.154Z,1520547182.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:02.534Z,1520547182.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:02.549Z,1520547182.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:02.931Z,1520547182.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:02.947Z,1520547182.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:03.334Z,1520547183.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:03.349Z,1520547183.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:03.734Z,1520547183.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:03.749Z,1520547183.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:04.131Z,1520547184.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:04.147Z,1520547184.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:04.534Z,1520547184.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:04.549Z,1520547184.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:04.941Z,1520547184.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:04.956Z,1520547184.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:05.338Z,1520547185.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:05.353Z,1520547185.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:05.738Z,1520547185.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:05.753Z,1520547185.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:06.138Z,1520547186.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:06.153Z,1520547186.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:06.538Z,1520547186.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:06.553Z,1520547186.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:06.938Z,1520547186.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:06.954Z,1520547186.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:07.334Z,1520547187.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:07.349Z,1520547187.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:07.732Z,1520547187.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:07.747Z,1520547187.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:08.138Z,1520547188.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:08.153Z,1520547188.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:08.534Z,1520547188.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:08.549Z,1520547188.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:08.931Z,1520547188.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:08.946Z,1520547188.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:09.338Z,1520547189.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:09.353Z,1520547189.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:09.739Z,1520547189.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:09.754Z,1520547189.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:10.131Z,1520547190.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:10.147Z,1520547190.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:10.529Z,1520547190.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:10.550Z,1520547190.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:10.934Z,1520547190.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:10.949Z,1520547190.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:11.338Z,1520547191.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:11.353Z,1520547191.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:11.738Z,1520547191.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:11.755Z,1520547191.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:12.138Z,1520547192.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:12.153Z,1520547192.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:12.539Z,1520547192.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:12.554Z,1520547192.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:12.935Z,1520547192.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:12.950Z,1520547192.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:13.338Z,1520547193.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:13.353Z,1520547193.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:13.732Z,1520547193.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:13.747Z,1520547193.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:14.140Z,1520547194.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:14.155Z,1520547194.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:14.541Z,1520547194.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:14.555Z,1520547194.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:14.930Z,1520547194.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:14.959Z,1520547194.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:15.339Z,1520547195.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:15.354Z,1520547195.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:15.739Z,1520547195.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:15.753Z,1520547195.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:16.131Z,1520547196.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:16.147Z,1520547196.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:16.534Z,1520547196.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:16.551Z,1520547196.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:16.934Z,1520547196.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:16.949Z,1520547196.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:17.335Z,1520547197.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:17.350Z,1520547197.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:17.735Z,1520547197.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:17.751Z,1520547197.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:18.134Z,1520547198.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:18.149Z,1520547198.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:18.538Z,1520547198.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:18.553Z,1520547198.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:18.934Z,1520547198.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:18.949Z,1520547198.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:19.343Z,1520547199.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:19.359Z,1520547199.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:19.731Z,1520547199.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:19.746Z,1520547199.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:20.136Z,1520547200.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:20.151Z,1520547200.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:20.534Z,1520547200.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:20.549Z,1520547200.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:20.931Z,1520547200.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:20.946Z,1520547200.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:21.329Z,1520547201.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:21.358Z,1520547201.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:21.738Z,1520547201.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:21.753Z,1520547201.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:22.119Z,1520547202.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:22.163Z,1520547202.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:22.538Z,1520547202.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:22.554Z,1520547202.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:22.929Z,1520547202.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:22.961Z,1520547202.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:23.338Z,1520547203.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:23.353Z,1520547203.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:23.738Z,1520547203.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:23.758Z,1520547203.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:24.138Z,1520547204.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:24.155Z,1520547204.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:24.538Z,1520547204.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:24.553Z,1520547204.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:24.939Z,1520547204.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:24.954Z,1520547204.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:25.345Z,1520547205.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:25.360Z,1520547205.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:25.723Z,1520547205.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:25.758Z,1520547205.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:26.133Z,1520547206.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:26.149Z,1520547206.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:26.546Z,1520547206.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:26.561Z,1520547206.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:26.924Z,1520547206.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:26.951Z,1520547206.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:27.330Z,1520547207.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:27.355Z,1520547207.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:27.740Z,1520547207.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:27.755Z,1520547207.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:28.123Z,1520547208.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:28.158Z,1520547208.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:28.533Z,1520547208.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:28.549Z,1520547208.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:28.933Z,1520547208.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:28.954Z,1520547208.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:29.338Z,1520547209.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:29.353Z,1520547209.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:32.452Z,1520547212.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:32.469Z,1520547212.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:32.572Z,1520547212.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:32.614Z,1520547212.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:32.951Z,1520547212.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:32.966Z,1520547212.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:33.349Z,1520547213.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:33.364Z,1520547213.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:33.753Z,1520547213.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:33.768Z,1520547213.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:34.151Z,1520547214.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:34.166Z,1520547214.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:34.551Z,1520547214.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:34.566Z,1520547214.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:34.950Z,1520547214.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:34.965Z,1520547214.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:35.351Z,1520547215.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:35.366Z,1520547215.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:35.752Z,1520547215.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:35.768Z,1520547215.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:36.150Z,1520547216.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:36.165Z,1520547216.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:36.551Z,1520547216.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:36.566Z,1520547216.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:36.941Z,1520547216.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:36.957Z,1520547216.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:37.349Z,1520547217.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:37.393Z,1520547217.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:37.749Z,1520547217.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:37.764Z,1520547217.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:38.141Z,1520547218.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:38.164Z,1520547218.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:38.551Z,1520547218.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:38.567Z,1520547218.567 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:38.567Z,1520547218.567 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 289
2018-03-08T22:13:38.567Z,1520547218.567 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T22:13:38.569Z,1520547218.569 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:38.569Z,1520547218.569 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 289
2018-03-08T22:13:38.569Z,1520547218.569 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T22:13:38.571Z,1520547218.571 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:38.571Z,1520547218.571 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 289
2018-03-08T22:13:38.571Z,1520547218.571 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T22:13:38.599Z,1520547218.599 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T22:13:38.599Z,1520547218.599 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T22:13:38.599Z,1520547218.599 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T22:13:38.948Z,1520547218.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:38.973Z,1520547218.973 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T22:13:38.973Z,1520547218.973 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 289
2018-03-08T22:13:38.974Z,1520547218.974 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T22:13:38.974Z,1520547218.974 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 289
2018-03-08T22:13:38.974Z,1520547218.974 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T22:13:38.974Z,1520547218.974 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 289
2018-03-08T22:13:39.345Z,1520547219.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:39.366Z,1520547219.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T22:13:39.367Z,1520547219.367 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:13:39.367Z,1520547219.367 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:13:39.367Z,1520547219.367 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T22:13:39.368Z,1520547219.368 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:13:39.368Z,1520547219.368 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:13:39.368Z,1520547219.368 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T22:13:39.369Z,1520547219.369 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:13:39.369Z,1520547219.369 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:13:39.746Z,1520547219.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:39.765Z,1520547219.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T22:13:39.766Z,1520547219.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:40.150Z,1520547220.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:40.164Z,1520547220.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T22:13:40.165Z,1520547220.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:40.536Z,1520547220.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:40.564Z,1520547220.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T22:13:40.565Z,1520547220.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:40.946Z,1520547220.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:40.962Z,1520547220.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T22:13:40.963Z,1520547220.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:41.347Z,1520547221.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:41.367Z,1520547221.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T22:13:41.367Z,1520547221.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:41.748Z,1520547221.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:41.776Z,1520547221.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T22:13:41.781Z,1520547221.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:42.138Z,1520547222.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:42.164Z,1520547222.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T22:13:42.165Z,1520547222.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:42.541Z,1520547222.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:42.579Z,1520547222.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T22:13:42.580Z,1520547222.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:42.932Z,1520547222.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:42.972Z,1520547222.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T22:13:42.973Z,1520547222.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:43.341Z,1520547223.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:43.376Z,1520547223.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T22:13:43.381Z,1520547223.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:43.738Z,1520547223.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:43.773Z,1520547223.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T22:13:43.774Z,1520547223.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:44.140Z,1520547224.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:44.178Z,1520547224.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T22:13:44.197Z,1520547224.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:44.540Z,1520547224.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:44.584Z,1520547224.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T22:13:44.586Z,1520547224.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:44.941Z,1520547224.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:44.994Z,1520547224.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T22:13:44.995Z,1520547224.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:45.369Z,1520547225.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:45.427Z,1520547225.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-08T22:13:45.427Z,1520547225.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:45.741Z,1520547225.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:45.780Z,1520547225.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T22:13:45.785Z,1520547225.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:46.164Z,1520547226.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:46.178Z,1520547226.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T22:13:46.179Z,1520547226.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:46.552Z,1520547226.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:46.576Z,1520547226.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T22:13:46.577Z,1520547226.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:46.944Z,1520547226.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:46.967Z,1520547226.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T22:13:46.968Z,1520547226.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:47.346Z,1520547227.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:47.383Z,1520547227.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T22:13:47.384Z,1520547227.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:47.739Z,1520547227.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:47.754Z,1520547227.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T22:13:47.755Z,1520547227.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:48.146Z,1520547228.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:48.178Z,1520547228.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T22:13:48.179Z,1520547228.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:48.542Z,1520547228.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:48.557Z,1520547228.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T22:13:48.558Z,1520547228.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:48.936Z,1520547228.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:48.951Z,1520547228.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T22:13:48.951Z,1520547228.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:49.346Z,1520547229.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:49.361Z,1520547229.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T22:13:49.362Z,1520547229.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:49.744Z,1520547229.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:49.758Z,1520547229.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T22:13:49.759Z,1520547229.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:50.139Z,1520547230.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:50.154Z,1520547230.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T22:13:50.155Z,1520547230.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:50.538Z,1520547230.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:50.558Z,1520547230.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T22:13:50.559Z,1520547230.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:50.944Z,1520547230.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:50.959Z,1520547230.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T22:13:50.960Z,1520547230.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:51.346Z,1520547231.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:51.361Z,1520547231.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T22:13:51.362Z,1520547231.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:51.743Z,1520547231.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:51.758Z,1520547231.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T22:13:51.759Z,1520547231.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:52.143Z,1520547232.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:52.159Z,1520547232.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T22:13:52.159Z,1520547232.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:52.547Z,1520547232.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:52.561Z,1520547232.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T22:13:52.562Z,1520547232.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:52.944Z,1520547232.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:52.959Z,1520547232.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T22:13:52.960Z,1520547232.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:53.347Z,1520547233.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:53.361Z,1520547233.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T22:13:53.362Z,1520547233.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:53.740Z,1520547233.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:53.755Z,1520547233.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T22:13:53.756Z,1520547233.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:54.146Z,1520547234.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:54.161Z,1520547234.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T22:13:54.162Z,1520547234.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:54.547Z,1520547234.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:54.561Z,1520547234.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T22:13:54.562Z,1520547234.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:54.606Z,1520547234.606 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T22:13:54.606Z,1520547234.606 [NAL9602] No Fault, FailCount= 5
2018-03-08T22:13:54.916Z,1520547234.916 [NAL9602](INFO): Powering up NAL9602
2018-03-08T22:13:54.944Z,1520547234.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:54.979Z,1520547234.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T22:13:54.980Z,1520547234.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:55.348Z,1520547235.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:55.363Z,1520547235.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T22:13:55.363Z,1520547235.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:55.746Z,1520547235.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:55.760Z,1520547235.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T22:13:55.761Z,1520547235.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:56.142Z,1520547236.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:56.156Z,1520547236.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T22:13:56.157Z,1520547236.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:56.551Z,1520547236.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:56.566Z,1520547236.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T22:13:56.567Z,1520547236.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:56.948Z,1520547236.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:56.963Z,1520547236.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T22:13:56.964Z,1520547236.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:57.347Z,1520547237.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:57.361Z,1520547237.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T22:13:57.362Z,1520547237.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:57.748Z,1520547237.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:57.763Z,1520547237.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T22:13:57.764Z,1520547237.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:58.146Z,1520547238.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:58.161Z,1520547238.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T22:13:58.161Z,1520547238.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:58.547Z,1520547238.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:58.561Z,1520547238.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T22:13:58.562Z,1520547238.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:58.945Z,1520547238.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:58.968Z,1520547238.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:59.350Z,1520547239.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:59.365Z,1520547239.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:13:59.738Z,1520547239.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:13:59.768Z,1520547239.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:00.151Z,1520547240.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:00.167Z,1520547240.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:00.547Z,1520547240.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:00.562Z,1520547240.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:00.947Z,1520547240.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:00.962Z,1520547240.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:01.351Z,1520547241.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:01.367Z,1520547241.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:01.751Z,1520547241.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:01.767Z,1520547241.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:02.145Z,1520547242.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:02.159Z,1520547242.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:02.558Z,1520547242.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:02.578Z,1520547242.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:02.951Z,1520547242.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:02.970Z,1520547242.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:03.350Z,1520547243.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:03.365Z,1520547243.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:03.751Z,1520547243.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:03.766Z,1520547243.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:04.152Z,1520547244.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:04.174Z,1520547244.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:04.551Z,1520547244.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:04.566Z,1520547244.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:04.952Z,1520547244.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:04.967Z,1520547244.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:05.355Z,1520547245.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:05.380Z,1520547245.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:05.726Z,1520547245.726 [NAL9602](INFO): NAL9602 initialized
2018-03-08T22:14:05.755Z,1520547245.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:05.771Z,1520547245.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:06.148Z,1520547246.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:06.163Z,1520547246.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:06.553Z,1520547246.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:06.569Z,1520547246.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:06.953Z,1520547246.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:06.968Z,1520547246.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:07.353Z,1520547247.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:07.369Z,1520547247.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:07.742Z,1520547247.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:07.762Z,1520547247.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:08.144Z,1520547248.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:08.159Z,1520547248.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:08.551Z,1520547248.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:08.580Z,1520547248.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:08.953Z,1520547248.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:08.968Z,1520547248.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:09.354Z,1520547249.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:09.375Z,1520547249.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:09.750Z,1520547249.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:09.770Z,1520547249.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:10.141Z,1520547250.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:10.162Z,1520547250.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:10.539Z,1520547250.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:10.555Z,1520547250.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:10.942Z,1520547250.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:10.957Z,1520547250.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:11.406Z,1520547251.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:11.462Z,1520547251.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:11.749Z,1520547251.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:11.765Z,1520547251.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:12.153Z,1520547252.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:12.168Z,1520547252.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:12.554Z,1520547252.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:12.577Z,1520547252.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:12.936Z,1520547252.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:12.960Z,1520547252.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:13.376Z,1520547253.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:13.391Z,1520547253.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:13.757Z,1520547253.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:13.781Z,1520547253.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:14.157Z,1520547254.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:14.185Z,1520547254.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:14.564Z,1520547254.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:14.586Z,1520547254.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:14.948Z,1520547254.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:14.977Z,1520547254.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:15.347Z,1520547255.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:15.377Z,1520547255.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:15.772Z,1520547255.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:15.795Z,1520547255.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:16.154Z,1520547256.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:16.190Z,1520547256.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:16.565Z,1520547256.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:16.580Z,1520547256.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:16.945Z,1520547256.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:16.972Z,1520547256.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:17.352Z,1520547257.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:17.382Z,1520547257.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:17.757Z,1520547257.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:17.785Z,1520547257.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:18.169Z,1520547258.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:18.185Z,1520547258.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:18.573Z,1520547258.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:18.588Z,1520547258.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:18.946Z,1520547258.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:18.970Z,1520547258.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:19.347Z,1520547259.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:19.363Z,1520547259.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:19.758Z,1520547259.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:19.793Z,1520547259.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:20.162Z,1520547260.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:20.197Z,1520547260.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:20.561Z,1520547260.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:20.593Z,1520547260.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:20.954Z,1520547260.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:20.970Z,1520547260.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:21.351Z,1520547261.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:21.366Z,1520547261.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:21.753Z,1520547261.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:21.769Z,1520547261.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:22.157Z,1520547262.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:22.172Z,1520547262.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:22.553Z,1520547262.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:22.569Z,1520547262.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:22.951Z,1520547262.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:22.967Z,1520547262.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:23.349Z,1520547263.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:23.364Z,1520547263.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:23.754Z,1520547263.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:23.769Z,1520547263.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:24.157Z,1520547264.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:24.173Z,1520547264.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:24.557Z,1520547264.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:24.573Z,1520547264.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:24.952Z,1520547264.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:24.967Z,1520547264.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:25.351Z,1520547265.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:25.366Z,1520547265.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:25.755Z,1520547265.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:25.770Z,1520547265.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:26.157Z,1520547266.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:26.172Z,1520547266.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:26.554Z,1520547266.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:26.569Z,1520547266.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:26.950Z,1520547266.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:26.965Z,1520547266.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:27.351Z,1520547267.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:27.367Z,1520547267.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:27.754Z,1520547267.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:27.769Z,1520547267.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:28.157Z,1520547268.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:28.172Z,1520547268.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:28.554Z,1520547268.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:28.574Z,1520547268.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:28.947Z,1520547268.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:28.967Z,1520547268.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:29.349Z,1520547269.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:29.364Z,1520547269.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:32.919Z,1520547272.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:32.972Z,1520547272.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:33.066Z,1520547273.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:33.109Z,1520547273.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:33.475Z,1520547273.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:33.531Z,1520547273.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:33.862Z,1520547273.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:33.886Z,1520547273.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:34.266Z,1520547274.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:34.318Z,1520547274.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:34.666Z,1520547274.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:34.681Z,1520547274.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:35.068Z,1520547275.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:35.083Z,1520547275.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:35.481Z,1520547275.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:35.496Z,1520547275.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:35.885Z,1520547275.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:35.919Z,1520547275.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:36.261Z,1520547276.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:36.276Z,1520547276.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:36.663Z,1520547276.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:36.679Z,1520547276.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:37.064Z,1520547277.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:37.079Z,1520547277.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:37.467Z,1520547277.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:37.490Z,1520547277.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:37.874Z,1520547277.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:37.889Z,1520547277.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:38.273Z,1520547278.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:38.294Z,1520547278.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:38.668Z,1520547278.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:38.692Z,1520547278.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:39.067Z,1520547279.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:39.082Z,1520547279.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:39.472Z,1520547279.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:39.486Z,1520547279.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:39.861Z,1520547279.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:39.884Z,1520547279.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:40.264Z,1520547280.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:40.280Z,1520547280.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:40.673Z,1520547280.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:40.688Z,1520547280.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:41.070Z,1520547281.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:41.097Z,1520547281.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:41.480Z,1520547281.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:41.495Z,1520547281.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:41.882Z,1520547281.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:41.925Z,1520547281.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:42.268Z,1520547282.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:42.290Z,1520547282.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:42.656Z,1520547282.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:42.687Z,1520547282.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:43.056Z,1520547283.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:43.082Z,1520547283.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:43.451Z,1520547283.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:43.479Z,1520547283.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:43.873Z,1520547283.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:43.894Z,1520547283.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:44.280Z,1520547284.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:44.302Z,1520547284.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:44.665Z,1520547284.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:44.697Z,1520547284.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:45.059Z,1520547285.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:45.085Z,1520547285.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:45.459Z,1520547285.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:45.486Z,1520547285.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:45.852Z,1520547285.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:45.887Z,1520547285.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:46.251Z,1520547286.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:46.282Z,1520547286.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:46.655Z,1520547286.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:46.686Z,1520547286.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:47.065Z,1520547287.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:47.089Z,1520547287.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:47.484Z,1520547287.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:47.499Z,1520547287.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:47.881Z,1520547287.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:47.902Z,1520547287.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:48.259Z,1520547288.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:48.286Z,1520547288.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:48.655Z,1520547288.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:48.681Z,1520547288.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:49.055Z,1520547289.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:49.090Z,1520547289.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:49.459Z,1520547289.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:49.495Z,1520547289.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:49.874Z,1520547289.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:49.889Z,1520547289.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:50.282Z,1520547290.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:50.302Z,1520547290.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:50.665Z,1520547290.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:50.689Z,1520547290.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:51.055Z,1520547291.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:51.081Z,1520547291.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:51.455Z,1520547291.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:51.486Z,1520547291.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:51.852Z,1520547291.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:51.887Z,1520547291.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:52.256Z,1520547292.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:52.295Z,1520547292.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:52.659Z,1520547292.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:52.685Z,1520547292.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:53.061Z,1520547293.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:53.100Z,1520547293.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:53.481Z,1520547293.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:53.496Z,1520547293.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:53.878Z,1520547293.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:53.898Z,1520547293.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:54.259Z,1520547294.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:54.295Z,1520547294.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:54.656Z,1520547294.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:54.672Z,1520547294.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:55.058Z,1520547295.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:55.095Z,1520547295.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:55.463Z,1520547295.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:55.478Z,1520547295.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:55.873Z,1520547295.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:55.905Z,1520547295.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:56.277Z,1520547296.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:56.309Z,1520547296.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:56.669Z,1520547296.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:56.705Z,1520547296.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:57.065Z,1520547297.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:57.080Z,1520547297.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:57.462Z,1520547297.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:57.481Z,1520547297.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:57.859Z,1520547297.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:57.874Z,1520547297.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:58.262Z,1520547298.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:58.278Z,1520547298.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:58.663Z,1520547298.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:58.679Z,1520547298.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:59.066Z,1520547299.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:59.086Z,1520547299.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:59.477Z,1520547299.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:59.492Z,1520547299.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:14:59.869Z,1520547299.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:14:59.884Z,1520547299.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:00.259Z,1520547300.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:00.274Z,1520547300.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:00.658Z,1520547300.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:00.687Z,1520547300.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:01.068Z,1520547301.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:01.084Z,1520547301.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:01.455Z,1520547301.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:01.478Z,1520547301.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:01.881Z,1520547301.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:01.913Z,1520547301.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:02.273Z,1520547302.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:02.288Z,1520547302.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:02.669Z,1520547302.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:02.685Z,1520547302.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:03.063Z,1520547303.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:03.082Z,1520547303.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:03.464Z,1520547303.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:03.479Z,1520547303.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:03.858Z,1520547303.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:03.886Z,1520547303.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:04.268Z,1520547304.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:04.284Z,1520547304.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:04.661Z,1520547304.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:04.683Z,1520547304.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:05.068Z,1520547305.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:05.102Z,1520547305.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:05.476Z,1520547305.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:05.491Z,1520547305.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:05.878Z,1520547305.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:05.893Z,1520547305.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:06.263Z,1520547306.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:06.284Z,1520547306.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:06.660Z,1520547306.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:06.682Z,1520547306.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:07.064Z,1520547307.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:07.084Z,1520547307.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:07.468Z,1520547307.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:07.483Z,1520547307.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:07.868Z,1520547307.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:07.889Z,1520547307.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:08.279Z,1520547308.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:08.294Z,1520547308.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:08.670Z,1520547308.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:08.687Z,1520547308.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:09.050Z,1520547309.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:09.083Z,1520547309.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:09.455Z,1520547309.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:09.483Z,1520547309.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:09.851Z,1520547309.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:09.878Z,1520547309.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:10.255Z,1520547310.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:10.283Z,1520547310.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:10.659Z,1520547310.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:10.694Z,1520547310.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:11.078Z,1520547311.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:11.093Z,1520547311.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:11.475Z,1520547311.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:11.495Z,1520547311.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:11.881Z,1520547311.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:11.896Z,1520547311.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:12.251Z,1520547312.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:12.283Z,1520547312.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:12.655Z,1520547312.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:12.691Z,1520547312.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:13.056Z,1520547313.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:13.087Z,1520547313.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:13.460Z,1520547313.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:13.496Z,1520547313.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:13.865Z,1520547313.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:13.892Z,1520547313.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:14.277Z,1520547314.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:14.296Z,1520547314.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:14.665Z,1520547314.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:14.703Z,1520547314.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:15.062Z,1520547315.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:15.092Z,1520547315.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:15.464Z,1520547315.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:15.494Z,1520547315.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:15.860Z,1520547315.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:15.888Z,1520547315.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:16.259Z,1520547316.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:16.275Z,1520547316.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:16.663Z,1520547316.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:16.678Z,1520547316.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:17.073Z,1520547317.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:17.113Z,1520547317.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:17.474Z,1520547317.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:17.505Z,1520547317.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:17.877Z,1520547317.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:17.892Z,1520547317.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:18.266Z,1520547318.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:18.286Z,1520547318.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:18.664Z,1520547318.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:18.679Z,1520547318.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:19.065Z,1520547319.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:19.081Z,1520547319.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:19.455Z,1520547319.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:19.478Z,1520547319.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:19.869Z,1520547319.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:19.884Z,1520547319.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:20.273Z,1520547320.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:20.288Z,1520547320.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:20.668Z,1520547320.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:20.684Z,1520547320.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:21.059Z,1520547321.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:21.075Z,1520547321.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:21.459Z,1520547321.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:21.482Z,1520547321.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:21.867Z,1520547321.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:21.890Z,1520547321.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:22.263Z,1520547322.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:22.280Z,1520547322.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:22.668Z,1520547322.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:22.684Z,1520547322.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:23.072Z,1520547323.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:23.088Z,1520547323.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:23.473Z,1520547323.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:23.489Z,1520547323.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:23.873Z,1520547323.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:23.888Z,1520547323.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:24.259Z,1520547324.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:24.279Z,1520547324.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:24.658Z,1520547324.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:24.677Z,1520547324.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:25.062Z,1520547325.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:25.089Z,1520547325.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:25.467Z,1520547325.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:25.482Z,1520547325.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:25.868Z,1520547325.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:25.888Z,1520547325.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:26.281Z,1520547326.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:26.296Z,1520547326.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:26.677Z,1520547326.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:26.692Z,1520547326.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:27.067Z,1520547327.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:27.083Z,1520547327.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:27.455Z,1520547327.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:27.491Z,1520547327.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:27.867Z,1520547327.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:27.882Z,1520547327.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:28.251Z,1520547328.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:28.279Z,1520547328.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:28.659Z,1520547328.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:28.686Z,1520547328.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:29.065Z,1520547329.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:29.089Z,1520547329.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:29.473Z,1520547329.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:29.488Z,1520547329.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:32.585Z,1520547332.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:32.606Z,1520547332.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:32.701Z,1520547332.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:32.737Z,1520547332.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:33.086Z,1520547333.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:33.128Z,1520547333.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:33.484Z,1520547333.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:33.500Z,1520547333.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:33.885Z,1520547333.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:33.900Z,1520547333.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:34.285Z,1520547334.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:34.300Z,1520547334.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:34.685Z,1520547334.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:34.703Z,1520547334.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:35.085Z,1520547335.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:35.101Z,1520547335.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:35.497Z,1520547335.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:35.512Z,1520547335.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:35.902Z,1520547335.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:35.937Z,1520547335.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:36.288Z,1520547336.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:36.309Z,1520547336.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:36.688Z,1520547336.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:36.703Z,1520547336.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:37.088Z,1520547337.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:37.103Z,1520547337.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:37.479Z,1520547337.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:37.501Z,1520547337.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:37.903Z,1520547337.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:37.937Z,1520547337.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:38.293Z,1520547338.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:38.333Z,1520547338.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:38.690Z,1520547338.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:38.705Z,1520547338.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:39.086Z,1520547339.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:39.101Z,1520547339.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:39.488Z,1520547339.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:39.509Z,1520547339.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:39.882Z,1520547339.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:39.901Z,1520547339.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:40.287Z,1520547340.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:40.303Z,1520547340.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:40.687Z,1520547340.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:40.704Z,1520547340.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:41.092Z,1520547341.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:41.139Z,1520547341.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:41.493Z,1520547341.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:41.508Z,1520547341.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:41.900Z,1520547341.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:41.915Z,1520547341.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:42.289Z,1520547342.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:42.318Z,1520547342.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:42.690Z,1520547342.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:42.721Z,1520547342.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:43.100Z,1520547343.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:43.115Z,1520547343.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:43.479Z,1520547343.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:43.514Z,1520547343.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:43.910Z,1520547343.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:43.956Z,1520547343.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:44.314Z,1520547344.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:44.355Z,1520547344.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:44.697Z,1520547344.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:44.735Z,1520547344.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:45.081Z,1520547345.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:45.116Z,1520547345.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:45.483Z,1520547345.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:45.509Z,1520547345.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:45.889Z,1520547345.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:45.909Z,1520547345.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:46.294Z,1520547346.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:46.309Z,1520547346.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:46.683Z,1520547346.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:46.703Z,1520547346.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:47.094Z,1520547347.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:47.110Z,1520547347.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:47.497Z,1520547347.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:47.518Z,1520547347.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:47.898Z,1520547347.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:47.943Z,1520547347.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:48.285Z,1520547348.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:48.301Z,1520547348.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:48.683Z,1520547348.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:48.707Z,1520547348.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:49.085Z,1520547349.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:49.121Z,1520547349.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:49.491Z,1520547349.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:49.510Z,1520547349.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:49.896Z,1520547349.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:49.919Z,1520547349.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:50.301Z,1520547350.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:50.322Z,1520547350.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:50.701Z,1520547350.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:50.720Z,1520547350.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:51.091Z,1520547351.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:51.126Z,1520547351.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:51.491Z,1520547351.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:51.506Z,1520547351.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:51.875Z,1520547351.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:51.907Z,1520547351.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:52.291Z,1520547352.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:52.313Z,1520547352.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:52.675Z,1520547352.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:52.708Z,1520547352.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:53.102Z,1520547353.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:53.117Z,1520547353.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:53.504Z,1520547353.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:53.524Z,1520547353.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:53.904Z,1520547353.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:53.921Z,1520547353.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:54.291Z,1520547354.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:54.346Z,1520547354.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:54.680Z,1520547354.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:54.707Z,1520547354.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:55.080Z,1520547355.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:55.107Z,1520547355.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:55.491Z,1520547355.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:55.511Z,1520547355.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:55.901Z,1520547355.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:55.916Z,1520547355.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:56.305Z,1520547356.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:56.322Z,1520547356.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:56.702Z,1520547356.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:56.722Z,1520547356.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:57.092Z,1520547357.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:57.118Z,1520547357.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:57.493Z,1520547357.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:57.507Z,1520547357.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:57.892Z,1520547357.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:57.907Z,1520547357.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:58.279Z,1520547358.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:58.307Z,1520547358.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:58.683Z,1520547358.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:58.716Z,1520547358.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:59.102Z,1520547359.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:59.118Z,1520547359.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:59.509Z,1520547359.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:59.530Z,1520547359.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:15:59.903Z,1520547359.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:15:59.923Z,1520547359.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:00.279Z,1520547360.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:00.313Z,1520547360.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:00.678Z,1520547360.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:00.711Z,1520547360.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:01.075Z,1520547361.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:01.111Z,1520547361.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:01.483Z,1520547361.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:01.508Z,1520547361.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:01.889Z,1520547361.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:01.914Z,1520547361.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:02.293Z,1520547362.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:02.308Z,1520547362.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:02.757Z,1520547362.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:02.773Z,1520547362.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:03.080Z,1520547363.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:03.119Z,1520547363.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:03.483Z,1520547363.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:03.498Z,1520547363.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:03.883Z,1520547363.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:03.902Z,1520547363.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:04.281Z,1520547364.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:04.296Z,1520547364.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:04.683Z,1520547364.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:04.698Z,1520547364.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:05.094Z,1520547365.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:05.114Z,1520547365.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:05.513Z,1520547365.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:05.589Z,1520547365.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:05.884Z,1520547365.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:05.899Z,1520547365.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:06.280Z,1520547366.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:06.296Z,1520547366.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:06.679Z,1520547366.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:06.705Z,1520547366.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:07.079Z,1520547367.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:07.107Z,1520547367.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:07.515Z,1520547367.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:07.535Z,1520547367.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:07.903Z,1520547367.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:07.923Z,1520547367.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:08.307Z,1520547368.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:08.323Z,1520547368.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:08.694Z,1520547368.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:08.741Z,1520547368.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:09.080Z,1520547369.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:09.095Z,1520547369.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:09.479Z,1520547369.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:09.494Z,1520547369.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:09.887Z,1520547369.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:09.927Z,1520547369.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:10.285Z,1520547370.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:10.322Z,1520547370.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:10.684Z,1520547370.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:10.699Z,1520547370.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:11.101Z,1520547371.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:11.128Z,1520547371.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:11.502Z,1520547371.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:11.528Z,1520547371.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:11.889Z,1520547371.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:11.926Z,1520547371.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:12.285Z,1520547372.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:12.300Z,1520547372.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:12.688Z,1520547372.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:12.729Z,1520547372.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:13.089Z,1520547373.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:13.113Z,1520547373.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:13.488Z,1520547373.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:13.505Z,1520547373.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:13.890Z,1520547373.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:13.905Z,1520547373.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:14.301Z,1520547374.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:14.338Z,1520547374.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:14.702Z,1520547374.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:14.737Z,1520547374.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:15.086Z,1520547375.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:15.134Z,1520547375.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:15.483Z,1520547375.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:15.498Z,1520547375.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:15.886Z,1520547375.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:15.901Z,1520547375.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:16.289Z,1520547376.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:16.309Z,1520547376.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:16.687Z,1520547376.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:16.702Z,1520547376.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:17.101Z,1520547377.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:17.133Z,1520547377.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:17.497Z,1520547377.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:17.517Z,1520547377.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:17.897Z,1520547377.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:17.916Z,1520547377.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:18.291Z,1520547378.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:18.314Z,1520547378.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:18.691Z,1520547378.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:18.710Z,1520547378.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:19.093Z,1520547379.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:19.108Z,1520547379.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:19.488Z,1520547379.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:19.509Z,1520547379.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:19.897Z,1520547379.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:19.912Z,1520547379.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:20.298Z,1520547380.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:20.320Z,1520547380.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:20.696Z,1520547380.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:20.715Z,1520547380.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:21.092Z,1520547381.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:21.113Z,1520547381.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:21.493Z,1520547381.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:21.508Z,1520547381.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:21.892Z,1520547381.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:21.907Z,1520547381.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:22.286Z,1520547382.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:22.305Z,1520547382.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:22.689Z,1520547382.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:22.709Z,1520547382.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:23.093Z,1520547383.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:23.109Z,1520547383.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:23.497Z,1520547383.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:23.513Z,1520547383.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:23.897Z,1520547383.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:23.917Z,1520547383.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:24.281Z,1520547384.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:24.303Z,1520547384.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:24.686Z,1520547384.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:24.716Z,1520547384.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:25.093Z,1520547385.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:25.108Z,1520547385.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:25.491Z,1520547385.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:25.507Z,1520547385.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:25.897Z,1520547385.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:25.917Z,1520547385.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:26.297Z,1520547386.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:26.323Z,1520547386.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:26.692Z,1520547386.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:26.708Z,1520547386.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:27.091Z,1520547387.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:27.106Z,1520547387.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:27.492Z,1520547387.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:27.512Z,1520547387.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:27.881Z,1520547387.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:27.900Z,1520547387.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:28.283Z,1520547388.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:28.306Z,1520547388.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:28.692Z,1520547388.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:28.707Z,1520547388.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:29.094Z,1520547389.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:29.114Z,1520547389.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:29.501Z,1520547389.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:29.522Z,1520547389.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:32.605Z,1520547392.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:32.626Z,1520547392.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:32.719Z,1520547392.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:32.754Z,1520547392.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:33.104Z,1520547393.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:33.135Z,1520547393.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:33.507Z,1520547393.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:33.527Z,1520547393.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:33.895Z,1520547393.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:33.929Z,1520547393.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:34.307Z,1520547394.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:34.344Z,1520547394.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:34.709Z,1520547394.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:34.729Z,1520547394.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:35.117Z,1520547395.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:35.133Z,1520547395.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:35.522Z,1520547395.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:35.543Z,1520547395.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:35.918Z,1520547395.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:35.944Z,1520547395.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:36.296Z,1520547396.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:36.327Z,1520547396.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:36.712Z,1520547396.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:36.731Z,1520547396.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:37.092Z,1520547397.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:37.133Z,1520547397.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:37.509Z,1520547397.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:37.543Z,1520547397.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:37.917Z,1520547397.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:37.937Z,1520547397.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:38.320Z,1520547398.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:38.335Z,1520547398.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:38.717Z,1520547398.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:38.743Z,1520547398.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:39.099Z,1520547399.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:39.143Z,1520547399.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:39.498Z,1520547399.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:39.533Z,1520547399.533 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:39.533Z,1520547399.533 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 290
2018-03-08T22:16:39.533Z,1520547399.533 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T22:16:39.535Z,1520547399.535 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:39.535Z,1520547399.535 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 290
2018-03-08T22:16:39.535Z,1520547399.535 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T22:16:39.537Z,1520547399.537 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:39.537Z,1520547399.537 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 290
2018-03-08T22:16:39.537Z,1520547399.537 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T22:16:39.548Z,1520547399.548 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T22:16:39.549Z,1520547399.549 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T22:16:39.549Z,1520547399.549 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T22:16:39.888Z,1520547399.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:39.969Z,1520547399.969 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T22:16:39.969Z,1520547399.969 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 290
2018-03-08T22:16:39.970Z,1520547399.970 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T22:16:39.970Z,1520547399.970 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 290
2018-03-08T22:16:39.970Z,1520547399.970 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T22:16:39.970Z,1520547399.970 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 290
2018-03-08T22:16:40.333Z,1520547400.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:40.347Z,1520547400.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T22:16:40.348Z,1520547400.348 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:16:40.348Z,1520547400.348 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:16:40.348Z,1520547400.348 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T22:16:40.349Z,1520547400.349 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:16:40.349Z,1520547400.349 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:16:40.349Z,1520547400.349 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T22:16:40.350Z,1520547400.350 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:16:40.350Z,1520547400.350 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:16:40.703Z,1520547400.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:40.743Z,1520547400.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T22:16:40.744Z,1520547400.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:41.109Z,1520547401.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:41.129Z,1520547401.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T22:16:41.130Z,1520547401.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:41.518Z,1520547401.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:41.563Z,1520547401.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T22:16:41.564Z,1520547401.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:41.914Z,1520547401.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:41.952Z,1520547401.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T22:16:41.953Z,1520547401.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:42.291Z,1520547402.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:42.338Z,1520547402.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T22:16:42.339Z,1520547402.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:42.707Z,1520547402.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:42.730Z,1520547402.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T22:16:42.731Z,1520547402.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:43.105Z,1520547403.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:43.125Z,1520547403.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T22:16:43.126Z,1520547403.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:43.495Z,1520547403.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:43.534Z,1520547403.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T22:16:43.535Z,1520547403.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:43.914Z,1520547403.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:43.946Z,1520547403.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T22:16:43.947Z,1520547403.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:44.324Z,1520547404.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:44.342Z,1520547404.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T22:16:44.343Z,1520547404.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:44.711Z,1520547404.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:44.729Z,1520547404.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T22:16:44.730Z,1520547404.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:45.095Z,1520547405.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:45.127Z,1520547405.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T22:16:45.127Z,1520547405.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:45.491Z,1520547405.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:45.522Z,1520547405.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T22:16:45.523Z,1520547405.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:45.889Z,1520547405.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:45.912Z,1520547405.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T22:16:45.913Z,1520547405.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:46.299Z,1520547406.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:46.330Z,1520547406.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T22:16:46.331Z,1520547406.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:46.695Z,1520547406.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:46.739Z,1520547406.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T22:16:46.739Z,1520547406.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:47.113Z,1520547407.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:47.150Z,1520547407.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T22:16:47.151Z,1520547407.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:47.517Z,1520547407.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:47.537Z,1520547407.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T22:16:47.538Z,1520547407.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:47.914Z,1520547407.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:47.942Z,1520547407.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T22:16:47.943Z,1520547407.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:48.299Z,1520547408.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:48.329Z,1520547408.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T22:16:48.330Z,1520547408.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:48.694Z,1520547408.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:48.726Z,1520547408.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T22:16:48.727Z,1520547408.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:49.095Z,1520547409.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:49.132Z,1520547409.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T22:16:49.134Z,1520547409.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:49.495Z,1520547409.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:49.530Z,1520547409.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T22:16:49.531Z,1520547409.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:49.921Z,1520547409.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:49.936Z,1520547409.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T22:16:49.937Z,1520547409.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:50.319Z,1520547410.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:50.344Z,1520547410.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T22:16:50.345Z,1520547410.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:50.705Z,1520547410.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:50.744Z,1520547410.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T22:16:50.745Z,1520547410.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:51.099Z,1520547411.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:51.134Z,1520547411.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T22:16:51.135Z,1520547411.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:51.495Z,1520547411.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:51.534Z,1520547411.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T22:16:51.534Z,1520547411.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:51.895Z,1520547411.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:51.927Z,1520547411.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T22:16:51.928Z,1520547411.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:52.297Z,1520547412.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:52.312Z,1520547412.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T22:16:52.329Z,1520547412.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:52.703Z,1520547412.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:52.738Z,1520547412.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T22:16:52.739Z,1520547412.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:53.103Z,1520547413.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:53.133Z,1520547413.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T22:16:53.134Z,1520547413.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:53.527Z,1520547413.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:53.562Z,1520547413.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T22:16:53.563Z,1520547413.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:53.908Z,1520547413.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:53.940Z,1520547413.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T22:16:53.941Z,1520547413.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:54.299Z,1520547414.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:54.334Z,1520547414.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T22:16:54.335Z,1520547414.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:54.705Z,1520547414.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:54.742Z,1520547414.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T22:16:54.743Z,1520547414.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:55.096Z,1520547415.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:55.123Z,1520547415.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T22:16:55.123Z,1520547415.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:55.500Z,1520547415.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:55.515Z,1520547415.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T22:16:55.516Z,1520547415.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:55.919Z,1520547415.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:55.951Z,1520547415.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T22:16:55.952Z,1520547415.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:56.315Z,1520547416.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:56.342Z,1520547416.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T22:16:56.343Z,1520547416.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:56.706Z,1520547416.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:56.747Z,1520547416.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T22:16:56.748Z,1520547416.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:57.104Z,1520547417.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:57.120Z,1520547417.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T22:16:57.122Z,1520547417.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:57.504Z,1520547417.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:57.524Z,1520547417.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T22:16:57.525Z,1520547417.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:57.899Z,1520547417.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:57.918Z,1520547417.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T22:16:57.919Z,1520547417.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:58.302Z,1520547418.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:58.343Z,1520547418.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T22:16:58.344Z,1520547418.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:58.704Z,1520547418.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:58.720Z,1520547418.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T22:16:58.722Z,1520547418.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:59.105Z,1520547419.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:59.125Z,1520547419.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T22:16:59.126Z,1520547419.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:59.519Z,1520547419.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:59.551Z,1520547419.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:16:59.909Z,1520547419.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:16:59.950Z,1520547419.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:00.309Z,1520547420.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:00.330Z,1520547420.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:00.707Z,1520547420.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:00.726Z,1520547420.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:01.111Z,1520547421.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:01.126Z,1520547421.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:01.507Z,1520547421.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:01.551Z,1520547421.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:01.910Z,1520547421.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:01.931Z,1520547421.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:02.316Z,1520547422.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:02.333Z,1520547422.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:02.711Z,1520547422.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:02.727Z,1520547422.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:03.106Z,1520547423.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:03.151Z,1520547423.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:03.506Z,1520547423.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:03.528Z,1520547423.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:03.900Z,1520547423.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:03.921Z,1520547423.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:04.309Z,1520547424.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:04.325Z,1520547424.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:04.706Z,1520547424.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:04.736Z,1520547424.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:05.105Z,1520547425.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:05.136Z,1520547425.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:05.515Z,1520547425.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:05.532Z,1520547425.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:05.915Z,1520547425.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:05.931Z,1520547425.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:06.297Z,1520547426.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:06.352Z,1520547426.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:06.707Z,1520547426.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:06.731Z,1520547426.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:07.109Z,1520547427.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:07.129Z,1520547427.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:07.501Z,1520547427.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:07.520Z,1520547427.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:07.913Z,1520547427.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:07.951Z,1520547427.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:08.313Z,1520547428.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:08.333Z,1520547428.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:08.708Z,1520547428.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:08.729Z,1520547428.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:09.105Z,1520547429.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:09.122Z,1520547429.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:09.507Z,1520547429.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:09.554Z,1520547429.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:09.893Z,1520547429.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:09.916Z,1520547429.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:10.299Z,1520547430.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:10.326Z,1520547430.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:10.712Z,1520547430.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:10.727Z,1520547430.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:11.114Z,1520547431.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:11.151Z,1520547431.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:11.517Z,1520547431.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:11.536Z,1520547431.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:11.920Z,1520547431.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:11.935Z,1520547431.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:12.301Z,1520547432.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:12.324Z,1520547432.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:12.703Z,1520547432.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:12.755Z,1520547432.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:13.092Z,1520547433.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:13.122Z,1520547433.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:13.507Z,1520547433.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:13.527Z,1520547433.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:13.921Z,1520547433.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:13.958Z,1520547433.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:14.317Z,1520547434.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:14.358Z,1520547434.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:14.706Z,1520547434.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:14.741Z,1520547434.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:15.107Z,1520547435.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:15.128Z,1520547435.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:15.491Z,1520547435.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:15.530Z,1520547435.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:15.894Z,1520547435.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:15.927Z,1520547435.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:16.307Z,1520547436.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:16.331Z,1520547436.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:16.721Z,1520547436.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:16.736Z,1520547436.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:17.108Z,1520547437.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:17.141Z,1520547437.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:17.517Z,1520547437.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:17.563Z,1520547437.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:17.909Z,1520547437.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:17.930Z,1520547437.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:18.292Z,1520547438.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:18.334Z,1520547438.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:18.721Z,1520547438.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:18.742Z,1520547438.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:19.120Z,1520547439.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:19.163Z,1520547439.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:19.517Z,1520547439.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:19.537Z,1520547439.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:19.910Z,1520547439.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:19.930Z,1520547439.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:20.295Z,1520547440.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:20.336Z,1520547440.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:20.718Z,1520547440.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:20.750Z,1520547440.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:21.122Z,1520547441.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:21.141Z,1520547441.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:21.524Z,1520547441.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:21.546Z,1520547441.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:21.889Z,1520547441.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:21.930Z,1520547441.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:22.299Z,1520547442.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:22.326Z,1520547442.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:22.700Z,1520547442.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:22.733Z,1520547442.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:23.116Z,1520547443.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:23.133Z,1520547443.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:23.520Z,1520547443.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:23.539Z,1520547443.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:23.918Z,1520547443.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:23.950Z,1520547443.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:24.299Z,1520547444.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:24.330Z,1520547444.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:24.694Z,1520547444.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:24.734Z,1520547444.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:25.100Z,1520547445.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:25.133Z,1520547445.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:25.501Z,1520547445.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:25.546Z,1520547445.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:25.917Z,1520547445.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:25.938Z,1520547445.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:26.326Z,1520547446.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:26.342Z,1520547446.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:26.717Z,1520547446.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:26.732Z,1520547446.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:27.095Z,1520547447.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:27.126Z,1520547447.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:27.499Z,1520547447.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:27.533Z,1520547447.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:27.891Z,1520547447.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:27.931Z,1520547447.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:28.300Z,1520547448.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:28.331Z,1520547448.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:28.695Z,1520547448.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:28.724Z,1520547448.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:29.113Z,1520547449.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:29.134Z,1520547449.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:29.137Z,1520547449.137 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T22:17:29.137Z,1520547449.137 [Default:CheckIn:C.Wait] Stopped
2018-03-08T22:17:29.137Z,1520547449.137 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T22:17:29.137Z,1520547449.137 [Default:CheckIn:D] Running Loop=1
2018-03-08T22:17:29.522Z,1520547449.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:29.543Z,1520547449.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:29.550Z,1520547449.550 [Default:CheckIn:D] Stopped
2018-03-08T22:17:29.550Z,1520547449.550 [Default:CheckIn:E] Running Loop=1
2018-03-08T22:17:32.629Z,1520547452.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:32.645Z,1520547452.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:32.648Z,1520547452.648 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 871.745768 min 
2018-03-08T22:17:32.649Z,1520547452.649 [Default:CheckIn:E] Stopped
2018-03-08T22:17:32.649Z,1520547452.649 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T22:17:32.649Z,1520547452.649 [Default:CheckIn] Stopped
2018-03-08T22:17:32.649Z,1520547452.649 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T22:17:32.649Z,1520547452.649 [Default:CheckIn](INFO): Running loop #85
2018-03-08T22:17:32.649Z,1520547452.649 [Default:CheckIn] Running Loop=85
2018-03-08T22:17:32.649Z,1520547452.649 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T22:17:32.649Z,1520547452.649 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T22:17:32.751Z,1520547452.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:32.779Z,1520547452.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:33.140Z,1520547453.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:33.155Z,1520547453.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:33.538Z,1520547453.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:33.555Z,1520547453.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:33.940Z,1520547453.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:33.955Z,1520547453.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:34.340Z,1520547454.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:34.355Z,1520547454.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:34.741Z,1520547454.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:34.757Z,1520547454.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:35.144Z,1520547455.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:35.159Z,1520547455.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:35.540Z,1520547455.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:35.555Z,1520547455.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:35.941Z,1520547455.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:35.956Z,1520547455.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:36.336Z,1520547456.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:36.351Z,1520547456.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:36.740Z,1520547456.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:36.755Z,1520547456.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:37.140Z,1520547457.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:37.164Z,1520547457.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:37.542Z,1520547457.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:37.562Z,1520547457.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:37.935Z,1520547457.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:37.951Z,1520547457.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:38.335Z,1520547458.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:38.353Z,1520547458.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:38.743Z,1520547458.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:38.775Z,1520547458.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:39.146Z,1520547459.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:39.167Z,1520547459.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:39.545Z,1520547459.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:39.566Z,1520547459.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:39.940Z,1520547459.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:39.955Z,1520547459.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:40.328Z,1520547460.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:40.359Z,1520547460.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:40.751Z,1520547460.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:40.766Z,1520547460.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:41.151Z,1520547461.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:41.166Z,1520547461.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:41.548Z,1520547461.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:41.573Z,1520547461.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:41.928Z,1520547461.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:41.966Z,1520547461.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:42.333Z,1520547462.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:42.384Z,1520547462.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:42.754Z,1520547462.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:42.782Z,1520547462.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:43.146Z,1520547463.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:43.178Z,1520547463.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:43.543Z,1520547463.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:43.579Z,1520547463.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:43.938Z,1520547463.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:43.953Z,1520547463.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:44.348Z,1520547464.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:44.384Z,1520547464.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:44.742Z,1520547464.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:44.762Z,1520547464.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:45.143Z,1520547465.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:45.167Z,1520547465.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:45.543Z,1520547465.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:45.562Z,1520547465.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:45.938Z,1520547465.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:45.957Z,1520547465.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:46.322Z,1520547466.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:46.359Z,1520547466.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:46.748Z,1520547466.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:46.763Z,1520547466.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:47.142Z,1520547467.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:47.157Z,1520547467.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:47.548Z,1520547467.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:47.570Z,1520547467.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:47.943Z,1520547467.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:47.958Z,1520547467.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:48.319Z,1520547468.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:48.357Z,1520547468.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:48.746Z,1520547468.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:48.761Z,1520547468.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:49.145Z,1520547469.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:49.160Z,1520547469.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:49.549Z,1520547469.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:49.565Z,1520547469.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:49.927Z,1520547469.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:49.955Z,1520547469.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:50.321Z,1520547470.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:50.351Z,1520547470.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:50.750Z,1520547470.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:50.765Z,1520547470.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:51.148Z,1520547471.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:51.170Z,1520547471.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:51.547Z,1520547471.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:51.562Z,1520547471.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:51.931Z,1520547471.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:51.947Z,1520547471.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:52.326Z,1520547472.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:52.347Z,1520547472.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:52.748Z,1520547472.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:52.803Z,1520547472.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:53.142Z,1520547473.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:53.162Z,1520547473.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:53.537Z,1520547473.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:53.559Z,1520547473.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:53.928Z,1520547473.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:53.943Z,1520547473.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:54.325Z,1520547474.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:54.362Z,1520547474.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:54.735Z,1520547474.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:54.770Z,1520547474.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:55.145Z,1520547475.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:55.160Z,1520547475.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:55.541Z,1520547475.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:55.556Z,1520547475.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:55.925Z,1520547475.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:55.962Z,1520547475.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:56.330Z,1520547476.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:56.378Z,1520547476.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:56.735Z,1520547476.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:56.763Z,1520547476.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:57.138Z,1520547477.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:57.159Z,1520547477.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:57.544Z,1520547477.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:57.578Z,1520547477.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:57.940Z,1520547477.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:57.956Z,1520547477.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:58.334Z,1520547478.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:58.350Z,1520547478.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:58.745Z,1520547478.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:58.760Z,1520547478.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:59.147Z,1520547479.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:59.163Z,1520547479.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:59.549Z,1520547479.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:59.565Z,1520547479.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:17:59.940Z,1520547479.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:17:59.955Z,1520547479.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:00.335Z,1520547480.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:00.358Z,1520547480.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:00.747Z,1520547480.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:00.762Z,1520547480.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:01.149Z,1520547481.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:01.164Z,1520547481.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:01.544Z,1520547481.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:01.560Z,1520547481.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:01.934Z,1520547481.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:01.950Z,1520547481.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:02.319Z,1520547482.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:02.355Z,1520547482.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:02.748Z,1520547482.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:02.764Z,1520547482.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:03.144Z,1520547483.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:03.159Z,1520547483.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:03.545Z,1520547483.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:03.560Z,1520547483.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:03.939Z,1520547483.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:03.955Z,1520547483.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:04.339Z,1520547484.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:04.355Z,1520547484.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:04.742Z,1520547484.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:04.757Z,1520547484.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:05.144Z,1520547485.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:05.160Z,1520547485.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:05.544Z,1520547485.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:05.559Z,1520547485.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:05.941Z,1520547485.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:05.956Z,1520547485.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:06.339Z,1520547486.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:06.354Z,1520547486.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:06.744Z,1520547486.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:06.759Z,1520547486.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:07.148Z,1520547487.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:07.163Z,1520547487.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:07.548Z,1520547487.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:07.563Z,1520547487.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:07.940Z,1520547487.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:07.962Z,1520547487.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:08.336Z,1520547488.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:08.351Z,1520547488.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:08.747Z,1520547488.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:08.763Z,1520547488.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:09.143Z,1520547489.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:09.166Z,1520547489.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:09.549Z,1520547489.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:09.564Z,1520547489.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:09.937Z,1520547489.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:09.952Z,1520547489.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:10.322Z,1520547490.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:10.354Z,1520547490.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:10.745Z,1520547490.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:10.760Z,1520547490.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:11.145Z,1520547491.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:11.167Z,1520547491.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:11.548Z,1520547491.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:11.570Z,1520547491.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:11.942Z,1520547491.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:11.957Z,1520547491.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:12.338Z,1520547492.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:12.358Z,1520547492.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:12.748Z,1520547492.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:12.770Z,1520547492.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:13.148Z,1520547493.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:13.163Z,1520547493.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:13.549Z,1520547493.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:13.564Z,1520547493.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:13.939Z,1520547493.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:13.955Z,1520547493.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:14.335Z,1520547494.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:14.354Z,1520547494.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:14.748Z,1520547494.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:14.764Z,1520547494.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:15.150Z,1520547495.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:15.165Z,1520547495.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:15.541Z,1520547495.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:15.572Z,1520547495.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:15.940Z,1520547495.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:15.957Z,1520547495.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:16.333Z,1520547496.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:16.356Z,1520547496.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:16.757Z,1520547496.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:16.795Z,1520547496.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:17.140Z,1520547497.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:17.155Z,1520547497.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:17.546Z,1520547497.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:17.561Z,1520547497.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:17.939Z,1520547497.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:17.954Z,1520547497.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:18.320Z,1520547498.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:18.356Z,1520547498.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:18.745Z,1520547498.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:18.760Z,1520547498.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:19.147Z,1520547499.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:19.170Z,1520547499.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:19.540Z,1520547499.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:19.564Z,1520547499.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:19.925Z,1520547499.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:19.978Z,1520547499.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:20.346Z,1520547500.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:20.374Z,1520547500.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:20.746Z,1520547500.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:20.778Z,1520547500.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:21.146Z,1520547501.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:21.163Z,1520547501.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:21.550Z,1520547501.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:21.566Z,1520547501.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:21.929Z,1520547501.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:21.955Z,1520547501.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:22.325Z,1520547502.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:22.356Z,1520547502.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:22.737Z,1520547502.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:22.766Z,1520547502.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:23.135Z,1520547503.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:23.166Z,1520547503.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:23.542Z,1520547503.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:23.575Z,1520547503.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:23.932Z,1520547503.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:23.966Z,1520547503.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:24.334Z,1520547504.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:24.364Z,1520547504.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:24.744Z,1520547504.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:24.774Z,1520547504.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:25.142Z,1520547505.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:25.167Z,1520547505.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:25.553Z,1520547505.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:25.574Z,1520547505.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:25.927Z,1520547505.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:25.962Z,1520547505.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:26.328Z,1520547506.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:26.347Z,1520547506.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:26.739Z,1520547506.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:26.771Z,1520547506.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:27.145Z,1520547507.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:27.175Z,1520547507.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:27.541Z,1520547507.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:27.556Z,1520547507.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:27.928Z,1520547507.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:27.948Z,1520547507.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:28.335Z,1520547508.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:28.378Z,1520547508.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:28.749Z,1520547508.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:28.773Z,1520547508.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:29.141Z,1520547509.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:29.156Z,1520547509.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:29.547Z,1520547509.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:29.579Z,1520547509.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:32.630Z,1520547512.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:32.645Z,1520547512.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:32.743Z,1520547512.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:32.779Z,1520547512.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:33.110Z,1520547513.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:33.140Z,1520547513.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:33.510Z,1520547513.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:33.546Z,1520547513.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:33.908Z,1520547513.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:33.932Z,1520547513.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:34.296Z,1520547514.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:34.340Z,1520547514.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:34.691Z,1520547514.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:34.711Z,1520547514.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:35.092Z,1520547515.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:35.107Z,1520547515.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:35.499Z,1520547515.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:35.535Z,1520547515.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:35.913Z,1520547515.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:35.955Z,1520547515.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:36.313Z,1520547516.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:36.362Z,1520547516.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:36.710Z,1520547516.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:36.739Z,1520547516.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:37.105Z,1520547517.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:37.145Z,1520547517.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:37.491Z,1520547517.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:37.558Z,1520547517.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:37.910Z,1520547517.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:37.955Z,1520547517.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:38.307Z,1520547518.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:38.338Z,1520547518.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:38.706Z,1520547518.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:38.743Z,1520547518.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:39.109Z,1520547519.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:39.144Z,1520547519.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:39.512Z,1520547519.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:39.544Z,1520547519.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:39.891Z,1520547519.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:39.907Z,1520547519.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:40.298Z,1520547520.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:40.318Z,1520547520.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:40.700Z,1520547520.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:40.747Z,1520547520.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:41.101Z,1520547521.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:41.117Z,1520547521.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:41.505Z,1520547521.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:41.541Z,1520547521.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:41.915Z,1520547521.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:41.951Z,1520547521.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:42.292Z,1520547522.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:42.326Z,1520547522.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:42.700Z,1520547522.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:42.716Z,1520547522.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:43.100Z,1520547523.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:43.120Z,1520547523.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:43.502Z,1520547523.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:43.520Z,1520547523.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:43.913Z,1520547523.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:43.954Z,1520547523.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:44.301Z,1520547524.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:44.326Z,1520547524.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:44.700Z,1520547524.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:44.725Z,1520547524.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:45.101Z,1520547525.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:45.120Z,1520547525.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:45.501Z,1520547525.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:45.527Z,1520547525.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:45.892Z,1520547525.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:45.920Z,1520547525.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:46.303Z,1520547526.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:46.324Z,1520547526.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:46.705Z,1520547526.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:46.722Z,1520547526.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:47.105Z,1520547527.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:47.147Z,1520547527.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:47.509Z,1520547527.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:47.529Z,1520547527.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:47.909Z,1520547527.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:47.928Z,1520547527.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:48.293Z,1520547528.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:48.330Z,1520547528.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:48.703Z,1520547528.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:48.747Z,1520547528.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:49.105Z,1520547529.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:49.120Z,1520547529.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:49.504Z,1520547529.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:49.525Z,1520547529.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:49.911Z,1520547529.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:49.926Z,1520547529.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:50.309Z,1520547530.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:50.349Z,1520547530.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:50.710Z,1520547530.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:50.730Z,1520547530.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:51.097Z,1520547531.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:51.123Z,1520547531.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:51.507Z,1520547531.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:51.523Z,1520547531.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:51.893Z,1520547531.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:51.932Z,1520547531.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:52.306Z,1520547532.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:52.323Z,1520547532.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:52.705Z,1520547532.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:52.725Z,1520547532.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:53.109Z,1520547533.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:53.125Z,1520547533.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:53.510Z,1520547533.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:53.555Z,1520547533.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:53.909Z,1520547533.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:53.930Z,1520547533.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:54.303Z,1520547534.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:54.325Z,1520547534.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:54.705Z,1520547534.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:54.731Z,1520547534.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:55.101Z,1520547535.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:55.149Z,1520547535.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:55.496Z,1520547535.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:55.511Z,1520547535.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:55.908Z,1520547535.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:55.930Z,1520547535.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:56.310Z,1520547536.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:56.326Z,1520547536.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:56.704Z,1520547536.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:56.750Z,1520547536.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:57.104Z,1520547537.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:57.120Z,1520547537.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:57.500Z,1520547537.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:57.520Z,1520547537.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:57.889Z,1520547537.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:57.917Z,1520547537.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:58.295Z,1520547538.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:58.322Z,1520547538.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:58.703Z,1520547538.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:58.718Z,1520547538.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:59.111Z,1520547539.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:59.130Z,1520547539.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:59.511Z,1520547539.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:59.542Z,1520547539.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:18:59.901Z,1520547539.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:18:59.946Z,1520547539.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:00.295Z,1520547540.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:00.331Z,1520547540.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:00.691Z,1520547540.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:00.731Z,1520547540.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:01.091Z,1520547541.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:01.131Z,1520547541.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:01.488Z,1520547541.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:01.503Z,1520547541.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:01.902Z,1520547541.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:01.934Z,1520547541.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:02.305Z,1520547542.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:02.342Z,1520547542.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:02.702Z,1520547542.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:02.732Z,1520547542.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:03.091Z,1520547543.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:03.131Z,1520547543.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:03.491Z,1520547543.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:03.506Z,1520547543.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:03.888Z,1520547543.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:03.905Z,1520547543.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:04.298Z,1520547544.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:04.334Z,1520547544.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:04.698Z,1520547544.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:04.745Z,1520547544.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:05.097Z,1520547545.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:05.113Z,1520547545.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:05.509Z,1520547545.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:05.534Z,1520547545.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:05.902Z,1520547545.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:05.942Z,1520547545.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:06.296Z,1520547546.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:06.339Z,1520547546.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:06.735Z,1520547546.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:06.766Z,1520547546.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:07.096Z,1520547547.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:07.138Z,1520547547.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:07.496Z,1520547547.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:07.516Z,1520547547.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:07.921Z,1520547547.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:07.951Z,1520547547.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:08.301Z,1520547548.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:08.340Z,1520547548.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:08.702Z,1520547548.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:08.723Z,1520547548.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:09.100Z,1520547549.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:09.119Z,1520547549.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:09.511Z,1520547549.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:09.545Z,1520547549.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:09.894Z,1520547549.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:09.909Z,1520547549.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:10.301Z,1520547550.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:10.322Z,1520547550.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:10.715Z,1520547550.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:10.730Z,1520547550.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:11.101Z,1520547551.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:11.144Z,1520547551.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:11.522Z,1520547551.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:11.541Z,1520547551.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:11.918Z,1520547551.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:11.934Z,1520547551.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:12.290Z,1520547552.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:12.327Z,1520547552.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:12.695Z,1520547552.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:12.742Z,1520547552.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:13.096Z,1520547553.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:13.133Z,1520547553.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:13.495Z,1520547553.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:13.529Z,1520547553.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:13.914Z,1520547553.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:13.933Z,1520547553.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:14.314Z,1520547554.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:14.364Z,1520547554.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:14.697Z,1520547554.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:14.739Z,1520547554.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:15.090Z,1520547555.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:15.127Z,1520547555.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:15.495Z,1520547555.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:15.543Z,1520547555.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:15.888Z,1520547555.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:15.904Z,1520547555.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:16.299Z,1520547556.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:16.315Z,1520547556.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:16.699Z,1520547556.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:16.738Z,1520547556.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:17.103Z,1520547557.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:17.121Z,1520547557.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:17.513Z,1520547557.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:17.546Z,1520547557.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:17.905Z,1520547557.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:17.949Z,1520547557.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:18.297Z,1520547558.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:18.315Z,1520547558.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:18.701Z,1520547558.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:18.720Z,1520547558.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:19.098Z,1520547559.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:19.142Z,1520547559.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:19.494Z,1520547559.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:19.512Z,1520547559.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:19.915Z,1520547559.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:19.948Z,1520547559.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:20.316Z,1520547560.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:20.348Z,1520547560.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:20.704Z,1520547560.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:20.747Z,1520547560.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:21.098Z,1520547561.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:21.117Z,1520547561.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:21.503Z,1520547561.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:21.524Z,1520547561.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:21.904Z,1520547561.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:21.922Z,1520547561.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:22.303Z,1520547562.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:22.349Z,1520547562.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:22.703Z,1520547562.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:22.718Z,1520547562.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:23.105Z,1520547563.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:23.126Z,1520547563.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:23.511Z,1520547563.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:23.527Z,1520547563.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:23.909Z,1520547563.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:23.954Z,1520547563.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:24.298Z,1520547564.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:24.317Z,1520547564.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:24.702Z,1520547564.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:24.722Z,1520547564.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:25.108Z,1520547565.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:25.124Z,1520547565.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:25.499Z,1520547565.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:25.531Z,1520547565.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:25.906Z,1520547565.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:25.923Z,1520547565.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:26.309Z,1520547566.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:26.329Z,1520547566.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:26.710Z,1520547566.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:26.725Z,1520547566.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:27.100Z,1520547567.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:27.150Z,1520547567.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:27.504Z,1520547567.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:27.520Z,1520547567.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:27.904Z,1520547567.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:27.924Z,1520547567.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:28.302Z,1520547568.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:28.321Z,1520547568.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:28.706Z,1520547568.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:28.751Z,1520547568.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:29.113Z,1520547569.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:29.134Z,1520547569.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:29.514Z,1520547569.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:29.532Z,1520547569.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:29.917Z,1520547569.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:29.932Z,1520547569.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:33.144Z,1520547573.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:33.168Z,1520547573.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:33.291Z,1520547573.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:33.331Z,1520547573.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:33.674Z,1520547573.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:33.695Z,1520547573.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:34.072Z,1520547574.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:34.127Z,1520547574.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:34.470Z,1520547574.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:34.490Z,1520547574.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:34.861Z,1520547574.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:34.931Z,1520547574.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:35.254Z,1520547575.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:35.281Z,1520547575.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:35.658Z,1520547575.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:35.678Z,1520547575.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:36.069Z,1520547576.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:36.085Z,1520547576.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:36.469Z,1520547576.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:36.485Z,1520547576.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:36.864Z,1520547576.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:36.886Z,1520547576.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:37.260Z,1520547577.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:37.276Z,1520547577.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:37.655Z,1520547577.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:37.682Z,1520547577.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:38.063Z,1520547578.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:38.079Z,1520547578.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:38.460Z,1520547578.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:38.477Z,1520547578.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:38.868Z,1520547578.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:38.884Z,1520547578.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:39.272Z,1520547579.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:39.288Z,1520547579.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:39.677Z,1520547579.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:39.693Z,1520547579.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:40.047Z,1520547580.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:40.079Z,1520547580.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:40.459Z,1520547580.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:40.475Z,1520547580.475 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:40.475Z,1520547580.475 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 291
2018-03-08T22:19:40.475Z,1520547580.475 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T22:19:40.478Z,1520547580.478 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:40.478Z,1520547580.478 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 291
2018-03-08T22:19:40.478Z,1520547580.478 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T22:19:40.479Z,1520547580.479 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:40.479Z,1520547580.479 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 291
2018-03-08T22:19:40.480Z,1520547580.480 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T22:19:40.491Z,1520547580.491 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T22:19:40.492Z,1520547580.492 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T22:19:40.492Z,1520547580.492 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T22:19:40.851Z,1520547580.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:40.899Z,1520547580.899 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T22:19:40.899Z,1520547580.899 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 291
2018-03-08T22:19:40.899Z,1520547580.899 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T22:19:40.899Z,1520547580.899 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 291
2018-03-08T22:19:40.900Z,1520547580.900 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T22:19:40.900Z,1520547580.900 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 291
2018-03-08T22:19:41.248Z,1520547581.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:41.279Z,1520547581.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T22:19:41.279Z,1520547581.279 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:19:41.280Z,1520547581.280 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:19:41.280Z,1520547581.280 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T22:19:41.285Z,1520547581.285 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:19:41.285Z,1520547581.285 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:19:41.285Z,1520547581.285 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T22:19:41.286Z,1520547581.286 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:19:41.286Z,1520547581.286 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:19:41.650Z,1520547581.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:41.682Z,1520547581.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T22:19:41.683Z,1520547581.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:42.078Z,1520547582.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:42.106Z,1520547582.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T22:19:42.107Z,1520547582.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:42.475Z,1520547582.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:42.504Z,1520547582.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T22:19:42.509Z,1520547582.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:42.872Z,1520547582.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:42.890Z,1520547582.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T22:19:42.891Z,1520547582.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:43.266Z,1520547583.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:43.293Z,1520547583.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T22:19:43.294Z,1520547583.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:43.653Z,1520547583.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:43.693Z,1520547583.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T22:19:43.694Z,1520547583.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:44.052Z,1520547584.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:44.083Z,1520547584.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T22:19:44.084Z,1520547584.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:44.451Z,1520547584.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:44.466Z,1520547584.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T22:19:44.467Z,1520547584.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:44.883Z,1520547584.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:44.915Z,1520547584.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T22:19:44.916Z,1520547584.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:45.266Z,1520547585.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:45.286Z,1520547585.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T22:19:45.287Z,1520547585.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:45.664Z,1520547585.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:45.699Z,1520547585.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T22:19:45.705Z,1520547585.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:46.051Z,1520547586.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:46.091Z,1520547586.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T22:19:46.092Z,1520547586.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:46.455Z,1520547586.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:46.491Z,1520547586.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T22:19:46.492Z,1520547586.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:46.859Z,1520547586.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:46.874Z,1520547586.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T22:19:46.875Z,1520547586.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:47.263Z,1520547587.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:47.299Z,1520547587.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T22:19:47.300Z,1520547587.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:47.660Z,1520547587.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:47.674Z,1520547587.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T22:19:47.675Z,1520547587.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:48.072Z,1520547588.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:48.107Z,1520547588.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T22:19:48.108Z,1520547588.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:48.469Z,1520547588.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:48.484Z,1520547588.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T22:19:48.497Z,1520547588.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:48.861Z,1520547588.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:48.876Z,1520547588.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T22:19:48.877Z,1520547588.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:49.259Z,1520547589.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:49.274Z,1520547589.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T22:19:49.275Z,1520547589.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:49.659Z,1520547589.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:49.682Z,1520547589.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T22:19:49.683Z,1520547589.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:50.057Z,1520547590.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:50.090Z,1520547590.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T22:19:50.091Z,1520547590.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:50.459Z,1520547590.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:50.482Z,1520547590.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T22:19:50.483Z,1520547590.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:50.873Z,1520547590.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:50.894Z,1520547590.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T22:19:50.895Z,1520547590.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:51.273Z,1520547591.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:51.287Z,1520547591.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T22:19:51.289Z,1520547591.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:51.674Z,1520547591.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:51.688Z,1520547591.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T22:19:51.689Z,1520547591.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:52.062Z,1520547592.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:52.083Z,1520547592.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T22:19:52.084Z,1520547592.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:52.450Z,1520547592.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:52.482Z,1520547592.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T22:19:52.483Z,1520547592.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:52.865Z,1520547592.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:52.879Z,1520547592.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T22:19:52.880Z,1520547592.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:53.264Z,1520547593.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:53.279Z,1520547593.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T22:19:53.279Z,1520547593.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:53.650Z,1520547593.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:53.682Z,1520547593.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T22:19:53.683Z,1520547593.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:54.074Z,1520547594.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:54.089Z,1520547594.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T22:19:54.090Z,1520547594.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:54.476Z,1520547594.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:54.498Z,1520547594.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T22:19:54.499Z,1520547594.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:54.873Z,1520547594.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:54.888Z,1520547594.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T22:19:54.889Z,1520547594.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:55.251Z,1520547595.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:55.278Z,1520547595.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T22:19:55.278Z,1520547595.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:55.663Z,1520547595.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:55.678Z,1520547595.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T22:19:55.679Z,1520547595.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:56.051Z,1520547596.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:56.077Z,1520547596.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T22:19:56.078Z,1520547596.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:56.447Z,1520547596.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:56.482Z,1520547596.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T22:19:56.483Z,1520547596.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:56.872Z,1520547596.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:56.894Z,1520547596.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T22:19:56.895Z,1520547596.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:57.276Z,1520547597.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:57.298Z,1520547597.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T22:19:57.299Z,1520547597.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:57.677Z,1520547597.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:57.691Z,1520547597.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T22:19:57.692Z,1520547597.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:58.063Z,1520547598.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:58.077Z,1520547598.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T22:19:58.078Z,1520547598.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:58.450Z,1520547598.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:58.486Z,1520547598.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T22:19:58.487Z,1520547598.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:58.863Z,1520547598.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:58.878Z,1520547598.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T22:19:58.879Z,1520547598.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:59.264Z,1520547599.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:59.279Z,1520547599.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T22:19:59.279Z,1520547599.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:19:59.650Z,1520547599.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:19:59.682Z,1520547599.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T22:19:59.683Z,1520547599.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:00.073Z,1520547600.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:00.088Z,1520547600.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T22:20:00.089Z,1520547600.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:00.477Z,1520547600.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:00.493Z,1520547600.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:00.869Z,1520547600.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:00.884Z,1520547600.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:01.247Z,1520547601.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:01.283Z,1520547601.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:01.655Z,1520547601.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:01.682Z,1520547601.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:02.051Z,1520547602.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:02.078Z,1520547602.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:02.447Z,1520547602.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:02.484Z,1520547602.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:02.873Z,1520547602.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:02.889Z,1520547602.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:03.273Z,1520547603.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:03.289Z,1520547603.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:03.671Z,1520547603.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:03.698Z,1520547603.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:04.055Z,1520547604.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:04.086Z,1520547604.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:04.452Z,1520547604.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:04.479Z,1520547604.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:04.855Z,1520547604.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:04.886Z,1520547604.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:05.256Z,1520547605.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:05.271Z,1520547605.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:05.659Z,1520547605.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:05.674Z,1520547605.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:06.069Z,1520547606.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:06.102Z,1520547606.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:06.474Z,1520547606.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:06.499Z,1520547606.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:06.870Z,1520547606.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:06.902Z,1520547606.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:07.256Z,1520547607.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:07.272Z,1520547607.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:07.655Z,1520547607.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:07.678Z,1520547607.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:08.056Z,1520547608.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:08.072Z,1520547608.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:08.455Z,1520547608.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:08.470Z,1520547608.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:08.869Z,1520547608.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:08.905Z,1520547608.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:09.273Z,1520547609.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:09.304Z,1520547609.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:09.672Z,1520547609.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:09.707Z,1520547609.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:10.060Z,1520547610.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:10.082Z,1520547610.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:10.458Z,1520547610.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:10.473Z,1520547610.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:10.859Z,1520547610.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:10.874Z,1520547610.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:11.258Z,1520547611.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:11.274Z,1520547611.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:11.658Z,1520547611.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:11.673Z,1520547611.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:12.065Z,1520547612.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:12.080Z,1520547612.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:12.473Z,1520547612.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:12.504Z,1520547612.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:12.861Z,1520547612.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:12.877Z,1520547612.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:13.259Z,1520547613.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:13.274Z,1520547613.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:13.660Z,1520547613.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:13.675Z,1520547613.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:14.062Z,1520547614.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:14.077Z,1520547614.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:14.459Z,1520547614.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:14.474Z,1520547614.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:14.873Z,1520547614.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:14.904Z,1520547614.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:15.265Z,1520547615.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:15.280Z,1520547615.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:15.673Z,1520547615.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:15.704Z,1520547615.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:16.061Z,1520547616.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:16.076Z,1520547616.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:16.460Z,1520547616.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:16.475Z,1520547616.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:16.860Z,1520547616.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:16.875Z,1520547616.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:17.260Z,1520547617.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:17.275Z,1520547617.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:17.659Z,1520547617.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:17.678Z,1520547617.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:18.074Z,1520547618.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:18.105Z,1520547618.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:18.473Z,1520547618.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:18.503Z,1520547618.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:18.865Z,1520547618.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:18.880Z,1520547618.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:19.261Z,1520547619.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:19.276Z,1520547619.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:19.661Z,1520547619.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:19.676Z,1520547619.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:20.061Z,1520547620.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:20.076Z,1520547620.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:20.461Z,1520547620.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:20.475Z,1520547620.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:20.862Z,1520547620.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:20.878Z,1520547620.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:21.265Z,1520547621.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:21.280Z,1520547621.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:21.664Z,1520547621.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:21.729Z,1520547621.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:22.045Z,1520547622.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:22.061Z,1520547622.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:22.452Z,1520547622.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:22.468Z,1520547622.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:22.851Z,1520547622.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:22.875Z,1520547622.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:23.246Z,1520547623.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:23.261Z,1520547623.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:23.652Z,1520547623.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:23.667Z,1520547623.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:24.066Z,1520547624.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:24.081Z,1520547624.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:24.467Z,1520547624.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:24.507Z,1520547624.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:24.866Z,1520547624.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:24.881Z,1520547624.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:25.252Z,1520547625.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:25.268Z,1520547625.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:25.655Z,1520547625.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:25.671Z,1520547625.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:26.053Z,1520547626.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:26.068Z,1520547626.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:26.452Z,1520547626.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:26.475Z,1520547626.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:26.862Z,1520547626.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:26.890Z,1520547626.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:27.269Z,1520547627.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:27.292Z,1520547627.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:27.669Z,1520547627.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:27.694Z,1520547627.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:28.051Z,1520547628.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:28.067Z,1520547628.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:28.458Z,1520547628.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:28.495Z,1520547628.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:28.858Z,1520547628.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:28.874Z,1520547628.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:29.251Z,1520547629.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:29.267Z,1520547629.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:29.656Z,1520547629.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:29.671Z,1520547629.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:30.069Z,1520547630.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:30.102Z,1520547630.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:33.187Z,1520547633.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:33.202Z,1520547633.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:33.317Z,1520547633.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:33.351Z,1520547633.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:33.658Z,1520547633.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:33.678Z,1520547633.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:34.056Z,1520547634.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:34.071Z,1520547634.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:34.463Z,1520547634.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:34.483Z,1520547634.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:34.861Z,1520547634.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:34.877Z,1520547634.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:35.265Z,1520547635.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:35.280Z,1520547635.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:35.673Z,1520547635.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:35.705Z,1520547635.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:36.059Z,1520547636.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:36.074Z,1520547636.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:36.462Z,1520547636.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:36.477Z,1520547636.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:36.862Z,1520547636.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:36.877Z,1520547636.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:37.258Z,1520547637.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:37.282Z,1520547637.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:37.663Z,1520547637.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:37.678Z,1520547637.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:38.068Z,1520547638.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:38.083Z,1520547638.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:38.469Z,1520547638.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:38.484Z,1520547638.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:38.869Z,1520547638.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:38.883Z,1520547638.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:39.263Z,1520547639.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:39.279Z,1520547639.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:39.659Z,1520547639.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:39.674Z,1520547639.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:40.061Z,1520547640.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:40.076Z,1520547640.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:40.463Z,1520547640.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:40.482Z,1520547640.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:40.869Z,1520547640.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:40.884Z,1520547640.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:41.269Z,1520547641.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:41.284Z,1520547641.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:41.668Z,1520547641.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:41.683Z,1520547641.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:42.064Z,1520547642.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:42.079Z,1520547642.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:42.464Z,1520547642.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:42.479Z,1520547642.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:42.864Z,1520547642.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:42.879Z,1520547642.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:43.259Z,1520547643.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:43.278Z,1520547643.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:43.660Z,1520547643.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:43.675Z,1520547643.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:44.069Z,1520547644.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:44.084Z,1520547644.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:44.469Z,1520547644.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:44.484Z,1520547644.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:44.869Z,1520547644.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:44.884Z,1520547644.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:45.263Z,1520547645.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:45.278Z,1520547645.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:45.659Z,1520547645.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:45.678Z,1520547645.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:46.064Z,1520547646.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:46.080Z,1520547646.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:46.463Z,1520547646.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:46.483Z,1520547646.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:46.869Z,1520547646.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:46.891Z,1520547646.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:47.269Z,1520547647.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:47.284Z,1520547647.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:47.668Z,1520547647.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:47.684Z,1520547647.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:48.059Z,1520547648.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:48.074Z,1520547648.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:48.459Z,1520547648.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:48.474Z,1520547648.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:48.859Z,1520547648.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:48.883Z,1520547648.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:49.259Z,1520547649.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:49.275Z,1520547649.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:49.660Z,1520547649.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:49.675Z,1520547649.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:50.068Z,1520547650.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:50.083Z,1520547650.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:50.468Z,1520547650.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:50.483Z,1520547650.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:50.868Z,1520547650.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:50.884Z,1520547650.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:51.259Z,1520547651.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:51.274Z,1520547651.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:51.655Z,1520547651.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:51.686Z,1520547651.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:52.064Z,1520547652.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:52.079Z,1520547652.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:52.463Z,1520547652.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:52.482Z,1520547652.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:52.868Z,1520547652.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:52.883Z,1520547652.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:53.268Z,1520547653.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:53.283Z,1520547653.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:53.669Z,1520547653.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:53.684Z,1520547653.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:54.059Z,1520547654.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:54.074Z,1520547654.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:54.456Z,1520547654.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:54.471Z,1520547654.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:54.859Z,1520547654.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:54.874Z,1520547654.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:55.255Z,1520547655.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:55.278Z,1520547655.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:55.659Z,1520547655.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:55.675Z,1520547655.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:56.068Z,1520547656.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:56.090Z,1520547656.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:56.469Z,1520547656.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:56.484Z,1520547656.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:56.868Z,1520547656.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:56.883Z,1520547656.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:57.263Z,1520547657.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:57.278Z,1520547657.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:57.668Z,1520547657.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:57.683Z,1520547657.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:58.064Z,1520547658.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:58.079Z,1520547658.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:58.464Z,1520547658.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:58.479Z,1520547658.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:58.868Z,1520547658.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:58.883Z,1520547658.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:59.270Z,1520547659.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:59.285Z,1520547659.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:20:59.668Z,1520547659.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:20:59.683Z,1520547659.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:00.063Z,1520547660.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:00.078Z,1520547660.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:00.461Z,1520547660.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:00.476Z,1520547660.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:00.852Z,1520547660.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:00.883Z,1520547660.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:01.266Z,1520547661.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:01.286Z,1520547661.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:01.665Z,1520547661.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:01.680Z,1520547661.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:02.064Z,1520547662.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:02.080Z,1520547662.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:02.469Z,1520547662.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:02.485Z,1520547662.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:02.869Z,1520547662.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:02.884Z,1520547662.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:03.258Z,1520547663.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:03.273Z,1520547663.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:03.669Z,1520547663.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:03.684Z,1520547663.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:04.060Z,1520547664.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:04.076Z,1520547664.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:04.463Z,1520547664.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:04.479Z,1520547664.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:04.868Z,1520547664.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:04.890Z,1520547664.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:05.270Z,1520547665.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:05.285Z,1520547665.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:05.668Z,1520547665.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:05.694Z,1520547665.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:06.063Z,1520547666.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:06.078Z,1520547666.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:06.459Z,1520547666.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:06.482Z,1520547666.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:06.848Z,1520547666.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:06.883Z,1520547666.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:07.263Z,1520547667.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:07.280Z,1520547667.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:07.663Z,1520547667.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:07.678Z,1520547667.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:08.069Z,1520547668.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:08.085Z,1520547668.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:08.472Z,1520547668.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:08.494Z,1520547668.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:08.873Z,1520547668.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:08.888Z,1520547668.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:09.248Z,1520547669.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:09.278Z,1520547669.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:09.655Z,1520547669.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:09.677Z,1520547669.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:10.061Z,1520547670.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:10.076Z,1520547670.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:10.463Z,1520547670.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:10.482Z,1520547670.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:10.869Z,1520547670.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:10.885Z,1520547670.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:11.272Z,1520547671.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:11.287Z,1520547671.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:11.672Z,1520547671.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:11.688Z,1520547671.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:12.059Z,1520547672.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:12.082Z,1520547672.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:12.463Z,1520547672.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:12.478Z,1520547672.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:12.848Z,1520547672.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:12.875Z,1520547672.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:13.263Z,1520547673.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:13.279Z,1520547673.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:13.651Z,1520547673.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:13.679Z,1520547673.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:14.066Z,1520547674.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:14.088Z,1520547674.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:14.473Z,1520547674.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:14.494Z,1520547674.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:14.877Z,1520547674.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:14.892Z,1520547674.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:15.248Z,1520547675.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:15.278Z,1520547675.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:15.651Z,1520547675.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:15.682Z,1520547675.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:16.047Z,1520547676.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:16.079Z,1520547676.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:16.463Z,1520547676.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:16.478Z,1520547676.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:16.870Z,1520547676.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:16.890Z,1520547676.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:17.276Z,1520547677.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:17.291Z,1520547677.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:17.670Z,1520547677.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:17.685Z,1520547677.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:18.051Z,1520547678.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:18.082Z,1520547678.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:18.447Z,1520547678.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:18.480Z,1520547678.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:18.848Z,1520547678.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:18.887Z,1520547678.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:19.255Z,1520547679.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:19.282Z,1520547679.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:19.647Z,1520547679.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:19.680Z,1520547679.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:20.068Z,1520547680.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:20.091Z,1520547680.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:20.477Z,1520547680.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:20.493Z,1520547680.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:20.870Z,1520547680.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:20.885Z,1520547680.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:21.251Z,1520547681.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:21.274Z,1520547681.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:21.652Z,1520547681.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:21.667Z,1520547681.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:22.056Z,1520547682.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:22.071Z,1520547682.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:22.453Z,1520547682.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:22.468Z,1520547682.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:22.869Z,1520547682.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:22.894Z,1520547682.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:23.269Z,1520547683.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:23.294Z,1520547683.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:23.667Z,1520547683.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:23.697Z,1520547683.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:24.059Z,1520547684.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:24.094Z,1520547684.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:24.459Z,1520547684.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:24.474Z,1520547684.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:24.852Z,1520547684.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:24.867Z,1520547684.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:25.259Z,1520547685.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:25.275Z,1520547685.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:25.659Z,1520547685.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:25.674Z,1520547685.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:26.061Z,1520547686.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:26.077Z,1520547686.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:26.473Z,1520547686.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:26.497Z,1520547686.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:26.869Z,1520547686.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:26.901Z,1520547686.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:27.254Z,1520547687.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:27.273Z,1520547687.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:27.659Z,1520547687.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:27.675Z,1520547687.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:28.060Z,1520547688.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:28.075Z,1520547688.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:28.458Z,1520547688.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:28.498Z,1520547688.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:28.873Z,1520547688.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:28.905Z,1520547688.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:29.269Z,1520547689.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:29.284Z,1520547689.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:29.673Z,1520547689.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:29.705Z,1520547689.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:30.059Z,1520547690.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:30.074Z,1520547690.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:30.462Z,1520547690.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:30.478Z,1520547690.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:30.856Z,1520547690.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:30.879Z,1520547690.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:31.264Z,1520547691.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:31.279Z,1520547691.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:31.660Z,1520547691.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:31.675Z,1520547691.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:32.064Z,1520547692.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:32.079Z,1520547692.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:35.185Z,1520547695.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:35.211Z,1520547695.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:35.318Z,1520547695.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:35.358Z,1520547695.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:35.668Z,1520547695.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:35.683Z,1520547695.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:36.067Z,1520547696.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:36.083Z,1520547696.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:36.467Z,1520547696.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:36.482Z,1520547696.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:36.877Z,1520547696.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:36.905Z,1520547696.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:37.281Z,1520547697.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:37.313Z,1520547697.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:37.673Z,1520547697.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:37.689Z,1520547697.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:38.072Z,1520547698.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:38.087Z,1520547698.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:38.472Z,1520547698.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:38.487Z,1520547698.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:38.859Z,1520547698.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:38.882Z,1520547698.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:39.265Z,1520547699.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:39.286Z,1520547699.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:39.668Z,1520547699.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:39.684Z,1520547699.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:40.073Z,1520547700.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:40.089Z,1520547700.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:40.477Z,1520547700.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:40.492Z,1520547700.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:40.877Z,1520547700.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:40.893Z,1520547700.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:41.259Z,1520547701.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:41.282Z,1520547701.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:41.671Z,1520547701.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:41.695Z,1520547701.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:42.069Z,1520547702.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:42.085Z,1520547702.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:42.465Z,1520547702.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:42.495Z,1520547702.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:42.882Z,1520547702.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:42.897Z,1520547702.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:43.285Z,1520547703.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:43.309Z,1520547703.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:43.670Z,1520547703.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:43.697Z,1520547703.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:44.058Z,1520547704.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:44.107Z,1520547704.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:44.498Z,1520547704.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:44.542Z,1520547704.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:44.859Z,1520547704.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:44.875Z,1520547704.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:45.302Z,1520547705.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:45.358Z,1520547705.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:45.664Z,1520547705.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:45.717Z,1520547705.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:46.081Z,1520547706.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:46.110Z,1520547706.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:46.477Z,1520547706.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:46.510Z,1520547706.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:46.877Z,1520547706.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:46.903Z,1520547706.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:47.271Z,1520547707.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:47.304Z,1520547707.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:47.664Z,1520547707.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:47.679Z,1520547707.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:48.064Z,1520547708.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:48.079Z,1520547708.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:48.467Z,1520547708.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:48.486Z,1520547708.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:48.873Z,1520547708.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:48.889Z,1520547708.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:49.281Z,1520547709.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:49.313Z,1520547709.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:49.681Z,1520547709.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:49.712Z,1520547709.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:50.066Z,1520547710.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:50.081Z,1520547710.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:50.468Z,1520547710.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:50.483Z,1520547710.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:50.867Z,1520547710.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:50.883Z,1520547710.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:51.267Z,1520547711.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:51.286Z,1520547711.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:51.667Z,1520547711.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:51.683Z,1520547711.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:52.081Z,1520547712.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:52.111Z,1520547712.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:52.481Z,1520547712.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:52.511Z,1520547712.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:52.880Z,1520547712.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:52.914Z,1520547712.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:53.264Z,1520547713.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:53.279Z,1520547713.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:53.666Z,1520547713.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:53.681Z,1520547713.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:54.068Z,1520547714.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:54.083Z,1520547714.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:54.468Z,1520547714.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:54.483Z,1520547714.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:54.869Z,1520547714.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:54.885Z,1520547714.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:55.281Z,1520547715.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:55.313Z,1520547715.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:55.681Z,1520547715.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:55.713Z,1520547715.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:56.066Z,1520547716.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:56.081Z,1520547716.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:56.468Z,1520547716.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:56.483Z,1520547716.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:56.866Z,1520547716.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:56.881Z,1520547716.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:57.266Z,1520547717.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:57.284Z,1520547717.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:57.667Z,1520547717.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:57.682Z,1520547717.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:58.081Z,1520547718.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:58.123Z,1520547718.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:58.473Z,1520547718.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:58.489Z,1520547718.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:58.880Z,1520547718.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:58.895Z,1520547718.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:59.269Z,1520547719.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:59.284Z,1520547719.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:21:59.668Z,1520547719.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:21:59.683Z,1520547719.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:00.068Z,1520547720.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:00.083Z,1520547720.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:00.466Z,1520547720.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:00.481Z,1520547720.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:00.869Z,1520547720.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:00.885Z,1520547720.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:01.273Z,1520547721.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:01.294Z,1520547721.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:01.673Z,1520547721.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:01.689Z,1520547721.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:02.068Z,1520547722.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:02.083Z,1520547722.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:02.471Z,1520547722.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:02.523Z,1520547722.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:02.868Z,1520547722.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:02.883Z,1520547722.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:03.268Z,1520547723.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:03.284Z,1520547723.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:03.675Z,1520547723.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:03.690Z,1520547723.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:03.739Z,1520547723.739 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T22:22:04.082Z,1520547724.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:04.097Z,1520547724.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:04.484Z,1520547724.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:04.511Z,1520547724.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:04.871Z,1520547724.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:04.936Z,1520547724.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:05.260Z,1520547725.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:05.291Z,1520547725.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:05.662Z,1520547725.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:05.699Z,1520547725.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:06.068Z,1520547726.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:06.101Z,1520547726.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:06.459Z,1520547726.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:06.474Z,1520547726.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:06.877Z,1520547726.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:06.904Z,1520547726.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:07.273Z,1520547727.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:07.302Z,1520547727.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:07.677Z,1520547727.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:07.703Z,1520547727.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:08.063Z,1520547728.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:08.103Z,1520547728.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:08.459Z,1520547728.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:08.473Z,1520547728.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:08.867Z,1520547728.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:08.882Z,1520547728.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:09.267Z,1520547729.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:09.286Z,1520547729.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:09.663Z,1520547729.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:09.678Z,1520547729.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:10.082Z,1520547730.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:10.111Z,1520547730.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:10.477Z,1520547730.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:10.492Z,1520547730.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:10.880Z,1520547730.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:10.895Z,1520547730.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:11.268Z,1520547731.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:11.283Z,1520547731.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:11.668Z,1520547731.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:11.683Z,1520547731.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:12.059Z,1520547732.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:12.095Z,1520547732.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:12.471Z,1520547732.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:12.487Z,1520547732.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:12.885Z,1520547732.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:12.901Z,1520547732.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:13.284Z,1520547733.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:13.299Z,1520547733.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:13.677Z,1520547733.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:13.695Z,1520547733.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:14.059Z,1520547734.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:14.090Z,1520547734.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:14.455Z,1520547734.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:14.578Z,1520547734.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:14.872Z,1520547734.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:14.887Z,1520547734.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:15.260Z,1520547735.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:15.291Z,1520547735.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:15.663Z,1520547735.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:15.690Z,1520547735.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:16.088Z,1520547736.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:16.103Z,1520547736.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:16.485Z,1520547736.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:16.506Z,1520547736.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:16.883Z,1520547736.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:16.898Z,1520547736.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:17.256Z,1520547737.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:17.291Z,1520547737.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:17.676Z,1520547737.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:17.691Z,1520547737.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:18.056Z,1520547738.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:18.093Z,1520547738.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:18.463Z,1520547738.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:18.490Z,1520547738.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:18.878Z,1520547738.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:18.898Z,1520547738.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:19.283Z,1520547739.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:19.298Z,1520547739.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:19.684Z,1520547739.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:19.699Z,1520547739.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:20.059Z,1520547740.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:20.086Z,1520547740.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:20.463Z,1520547740.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:20.492Z,1520547740.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:20.856Z,1520547740.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:20.886Z,1520547740.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:21.259Z,1520547741.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:21.286Z,1520547741.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:21.659Z,1520547741.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:21.697Z,1520547741.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:22.069Z,1520547742.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:22.105Z,1520547742.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:22.485Z,1520547742.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:22.506Z,1520547742.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:22.881Z,1520547742.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:22.897Z,1520547742.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:23.256Z,1520547743.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:23.291Z,1520547743.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:23.659Z,1520547743.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:23.685Z,1520547743.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:24.059Z,1520547744.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:24.091Z,1520547744.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:24.464Z,1520547744.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:24.490Z,1520547744.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:24.877Z,1520547744.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:24.893Z,1520547744.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:25.277Z,1520547745.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:25.298Z,1520547745.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:25.681Z,1520547745.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:25.697Z,1520547745.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:26.059Z,1520547746.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:26.085Z,1520547746.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:26.459Z,1520547746.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:26.487Z,1520547746.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:26.856Z,1520547746.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:26.891Z,1520547746.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:27.260Z,1520547747.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:27.286Z,1520547747.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:27.655Z,1520547747.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:27.691Z,1520547747.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:28.069Z,1520547748.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:28.091Z,1520547748.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:28.481Z,1520547748.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:28.502Z,1520547748.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:28.882Z,1520547748.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:28.897Z,1520547748.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:29.293Z,1520547749.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:29.329Z,1520547749.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:29.659Z,1520547749.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:29.685Z,1520547749.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:30.059Z,1520547750.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:30.087Z,1520547750.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:30.463Z,1520547750.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:30.489Z,1520547750.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:33.601Z,1520547753.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:33.639Z,1520547753.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:33.642Z,1520547753.642 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T22:17:32.6Z
2018-03-08T22:22:33.642Z,1520547753.642 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T22:22:33.642Z,1520547753.642 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T22:22:33.731Z,1520547753.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:33.779Z,1520547753.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:34.178Z,1520547754.178 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0340.lzma
2018-03-08T22:22:34.209Z,1520547754.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:34.238Z,1520547754.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:34.492Z,1520547754.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:34.507Z,1520547754.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:34.892Z,1520547754.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:34.907Z,1520547754.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:35.268Z,1520547755.268 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0340.lzma.bak
2018-03-08T22:22:35.268Z,1520547755.268 [DataOverHttps](INFO): SBD MOMSN=7989622
2018-03-08T22:22:35.302Z,1520547755.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:35.330Z,1520547755.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:35.875Z,1520547755.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:35.899Z,1520547755.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:36.100Z,1520547756.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:36.116Z,1520547756.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:39.217Z,1520547759.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:39.249Z,1520547759.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:39.354Z,1520547759.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:39.394Z,1520547759.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:39.704Z,1520547759.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:39.719Z,1520547759.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:40.100Z,1520547760.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:40.115Z,1520547760.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:40.507Z,1520547760.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:40.526Z,1520547760.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:40.913Z,1520547760.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:40.948Z,1520547760.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:41.309Z,1520547761.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:41.324Z,1520547761.324 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:41.324Z,1520547761.324 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 292
2018-03-08T22:22:41.324Z,1520547761.324 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T22:22:41.326Z,1520547761.326 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:41.326Z,1520547761.326 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 292
2018-03-08T22:22:41.326Z,1520547761.326 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T22:22:41.327Z,1520547761.327 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:41.328Z,1520547761.328 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 292
2018-03-08T22:22:41.328Z,1520547761.328 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T22:22:41.368Z,1520547761.368 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T22:22:41.368Z,1520547761.368 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T22:22:41.368Z,1520547761.368 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T22:22:44.413Z,1520547764.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:44.439Z,1520547764.439 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T22:22:44.439Z,1520547764.439 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 292
2018-03-08T22:22:44.440Z,1520547764.440 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T22:22:44.440Z,1520547764.440 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 292
2018-03-08T22:22:44.440Z,1520547764.440 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T22:22:44.460Z,1520547764.460 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 292
2018-03-08T22:22:44.531Z,1520547764.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:44.565Z,1520547764.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T22:22:44.566Z,1520547764.566 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:22:44.566Z,1520547764.566 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:22:44.567Z,1520547764.567 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T22:22:44.567Z,1520547764.567 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:22:44.567Z,1520547764.567 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:22:44.568Z,1520547764.568 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T22:22:44.568Z,1520547764.568 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:22:44.569Z,1520547764.569 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:22:44.885Z,1520547764.885 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180308T074127/Express0341.lzma
2018-03-08T22:22:44.919Z,1520547764.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:44.946Z,1520547764.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T22:22:44.947Z,1520547764.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:45.300Z,1520547765.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:45.327Z,1520547765.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T22:22:45.328Z,1520547765.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:45.676Z,1520547765.676 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0341.lzma.bak
2018-03-08T22:22:45.676Z,1520547765.676 [DataOverHttps](INFO): SBD MOMSN=7989624
2018-03-08T22:22:45.729Z,1520547765.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:45.746Z,1520547765.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T22:22:45.747Z,1520547765.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:46.297Z,1520547766.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:46.327Z,1520547766.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2018-03-08T22:22:46.328Z,1520547766.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:46.331Z,1520547766.331 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T22:22:46.331Z,1520547766.331 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T22:22:46.331Z,1520547766.331 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T22:22:46.518Z,1520547766.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:46.532Z,1520547766.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T22:22:46.534Z,1520547766.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:49.611Z,1520547769.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:49.627Z,1520547769.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-03-08T22:22:49.628Z,1520547769.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:49.726Z,1520547769.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:49.774Z,1520547769.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-08T22:22:49.775Z,1520547769.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:50.101Z,1520547770.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:50.123Z,1520547770.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T22:22:50.124Z,1520547770.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:50.497Z,1520547770.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:50.528Z,1520547770.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T22:22:50.530Z,1520547770.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:50.886Z,1520547770.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:50.901Z,1520547770.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T22:22:50.901Z,1520547770.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:51.283Z,1520547771.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:51.302Z,1520547771.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T22:22:51.303Z,1520547771.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:51.685Z,1520547771.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:51.700Z,1520547771.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T22:22:51.701Z,1520547771.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:52.085Z,1520547772.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:52.100Z,1520547772.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T22:22:52.101Z,1520547772.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:52.480Z,1520547772.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:52.503Z,1520547772.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T22:22:52.504Z,1520547772.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:52.890Z,1520547772.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:52.904Z,1520547772.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T22:22:52.905Z,1520547772.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:53.289Z,1520547773.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:53.304Z,1520547773.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T22:22:53.305Z,1520547773.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:53.689Z,1520547773.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:53.710Z,1520547773.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T22:22:53.711Z,1520547773.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:54.087Z,1520547774.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:54.102Z,1520547774.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T22:22:54.103Z,1520547774.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:54.488Z,1520547774.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:54.503Z,1520547774.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T22:22:54.504Z,1520547774.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:54.882Z,1520547774.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:54.905Z,1520547774.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T22:22:54.906Z,1520547774.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:55.288Z,1520547775.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:55.303Z,1520547775.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T22:22:55.304Z,1520547775.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:55.687Z,1520547775.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:55.703Z,1520547775.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T22:22:55.704Z,1520547775.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:56.093Z,1520547776.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:56.108Z,1520547776.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T22:22:56.109Z,1520547776.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:56.494Z,1520547776.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:56.509Z,1520547776.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T22:22:56.510Z,1520547776.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:56.892Z,1520547776.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:56.907Z,1520547776.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T22:22:56.908Z,1520547776.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:57.287Z,1520547777.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:57.306Z,1520547777.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T22:22:57.307Z,1520547777.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:57.687Z,1520547777.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:57.755Z,1520547777.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T22:22:57.756Z,1520547777.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:58.081Z,1520547778.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:58.099Z,1520547778.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T22:22:58.100Z,1520547778.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:58.479Z,1520547778.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:58.502Z,1520547778.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T22:22:58.502Z,1520547778.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:58.897Z,1520547778.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:58.918Z,1520547778.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T22:22:58.919Z,1520547778.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:59.290Z,1520547779.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:59.304Z,1520547779.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T22:22:59.305Z,1520547779.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:22:59.709Z,1520547779.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:22:59.724Z,1520547779.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T22:22:59.741Z,1520547779.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:00.088Z,1520547780.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:00.102Z,1520547780.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T22:23:00.103Z,1520547780.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:00.496Z,1520547780.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:00.512Z,1520547780.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T22:23:00.513Z,1520547780.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:00.891Z,1520547780.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:00.922Z,1520547780.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T22:23:00.923Z,1520547780.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:01.284Z,1520547781.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:01.314Z,1520547781.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T22:23:01.315Z,1520547781.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:01.681Z,1520547781.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:01.705Z,1520547781.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:02.093Z,1520547782.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:02.117Z,1520547782.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:02.493Z,1520547782.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:02.517Z,1520547782.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:02.889Z,1520547782.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:02.921Z,1520547782.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:03.281Z,1520547783.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:03.296Z,1520547783.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:03.679Z,1520547783.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:03.694Z,1520547783.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:04.076Z,1520547784.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:04.092Z,1520547784.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:04.482Z,1520547784.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:04.519Z,1520547784.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:04.893Z,1520547784.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:04.926Z,1520547784.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:05.289Z,1520547785.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:05.321Z,1520547785.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:05.693Z,1520547785.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:05.729Z,1520547785.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:06.080Z,1520547786.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:06.095Z,1520547786.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:06.482Z,1520547786.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:06.502Z,1520547786.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:06.882Z,1520547786.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:06.897Z,1520547786.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:07.279Z,1520547787.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:07.294Z,1520547787.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:07.683Z,1520547787.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:07.706Z,1520547787.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:08.097Z,1520547788.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:08.133Z,1520547788.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:08.493Z,1520547788.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:08.508Z,1520547788.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:08.885Z,1520547788.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:08.913Z,1520547788.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:09.287Z,1520547789.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:09.306Z,1520547789.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:09.688Z,1520547789.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:09.702Z,1520547789.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:10.089Z,1520547790.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:10.104Z,1520547790.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:10.486Z,1520547790.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:10.506Z,1520547790.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:10.893Z,1520547790.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:10.908Z,1520547790.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:11.289Z,1520547791.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:11.304Z,1520547791.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:11.692Z,1520547791.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:11.714Z,1520547791.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:12.085Z,1520547792.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:12.107Z,1520547792.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:12.487Z,1520547792.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:12.506Z,1520547792.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:12.888Z,1520547792.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:12.903Z,1520547792.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:13.288Z,1520547793.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:13.303Z,1520547793.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:13.687Z,1520547793.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:13.707Z,1520547793.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:14.092Z,1520547794.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:14.107Z,1520547794.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:14.494Z,1520547794.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:14.514Z,1520547794.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:14.889Z,1520547794.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:14.910Z,1520547794.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:15.287Z,1520547795.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:15.306Z,1520547795.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:15.689Z,1520547795.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:15.704Z,1520547795.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:16.088Z,1520547796.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:16.110Z,1520547796.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:16.486Z,1520547796.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:16.506Z,1520547796.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:16.893Z,1520547796.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:16.910Z,1520547796.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:17.289Z,1520547797.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:17.304Z,1520547797.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:17.693Z,1520547797.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:17.709Z,1520547797.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:18.088Z,1520547798.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:18.104Z,1520547798.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:18.487Z,1520547798.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:18.502Z,1520547798.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:18.887Z,1520547798.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:18.906Z,1520547798.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:19.288Z,1520547799.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:19.304Z,1520547799.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:19.688Z,1520547799.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:19.710Z,1520547799.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:20.092Z,1520547800.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:20.114Z,1520547800.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:20.494Z,1520547800.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:20.511Z,1520547800.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:20.893Z,1520547800.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:20.908Z,1520547800.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:21.328Z,1520547801.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:21.354Z,1520547801.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:21.688Z,1520547801.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:21.704Z,1520547801.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:22.088Z,1520547802.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:22.104Z,1520547802.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:22.487Z,1520547802.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:22.503Z,1520547802.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:22.893Z,1520547802.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:22.909Z,1520547802.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:23.293Z,1520547803.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:23.309Z,1520547803.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:23.692Z,1520547803.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:23.707Z,1520547803.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:24.089Z,1520547804.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:24.105Z,1520547804.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:24.489Z,1520547804.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:24.504Z,1520547804.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:24.887Z,1520547804.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:24.906Z,1520547804.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:25.289Z,1520547805.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:25.305Z,1520547805.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:25.679Z,1520547805.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:25.695Z,1520547805.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:26.093Z,1520547806.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:26.108Z,1520547806.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:26.494Z,1520547806.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:26.514Z,1520547806.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:26.892Z,1520547806.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:26.908Z,1520547806.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:27.294Z,1520547807.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:27.311Z,1520547807.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:27.688Z,1520547807.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:27.704Z,1520547807.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:28.071Z,1520547808.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:28.103Z,1520547808.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:28.479Z,1520547808.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:28.505Z,1520547808.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:28.897Z,1520547808.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:28.918Z,1520547808.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:29.299Z,1520547809.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:29.314Z,1520547809.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:29.699Z,1520547809.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:29.714Z,1520547809.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:30.076Z,1520547810.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:30.115Z,1520547810.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:30.479Z,1520547810.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:30.511Z,1520547810.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:30.875Z,1520547810.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:30.911Z,1520547810.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:31.284Z,1520547811.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:31.314Z,1520547811.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:31.683Z,1520547811.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:31.719Z,1520547811.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:32.102Z,1520547812.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:32.122Z,1520547812.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:32.497Z,1520547812.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:32.519Z,1520547812.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:32.897Z,1520547812.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:32.917Z,1520547812.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:33.274Z,1520547813.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:33.292Z,1520547813.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:33.682Z,1520547813.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:33.699Z,1520547813.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:34.076Z,1520547814.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:34.105Z,1520547814.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:34.483Z,1520547814.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:34.523Z,1520547814.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:34.893Z,1520547814.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:34.925Z,1520547814.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:35.297Z,1520547815.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:35.329Z,1520547815.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:35.690Z,1520547815.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:35.705Z,1520547815.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:36.086Z,1520547816.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:36.102Z,1520547816.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:36.479Z,1520547816.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:36.494Z,1520547816.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:36.882Z,1520547816.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:36.911Z,1520547816.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:37.288Z,1520547817.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:37.303Z,1520547817.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:37.687Z,1520547817.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:37.706Z,1520547817.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:38.115Z,1520547818.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:38.162Z,1520547818.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:38.499Z,1520547818.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:38.542Z,1520547818.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:38.895Z,1520547818.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:38.910Z,1520547818.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:39.283Z,1520547819.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:39.299Z,1520547819.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:39.671Z,1520547819.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:39.707Z,1520547819.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:40.071Z,1520547820.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:40.107Z,1520547820.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:40.486Z,1520547820.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:40.506Z,1520547820.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:40.894Z,1520547820.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:40.910Z,1520547820.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:41.296Z,1520547821.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:41.311Z,1520547821.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:41.697Z,1520547821.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:41.718Z,1520547821.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:42.113Z,1520547822.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:42.152Z,1520547822.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:42.512Z,1520547822.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:42.543Z,1520547822.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:42.905Z,1520547822.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:42.941Z,1520547822.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:43.275Z,1520547823.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:43.311Z,1520547823.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:43.697Z,1520547823.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:43.719Z,1520547823.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:44.091Z,1520547824.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:44.126Z,1520547824.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:44.492Z,1520547824.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:44.516Z,1520547824.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:44.883Z,1520547824.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:44.916Z,1520547824.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:45.295Z,1520547825.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:45.321Z,1520547825.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:45.682Z,1520547825.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:45.714Z,1520547825.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:46.110Z,1520547826.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:46.139Z,1520547826.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:46.519Z,1520547826.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:46.543Z,1520547826.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:46.893Z,1520547826.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:46.924Z,1520547826.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:49.991Z,1520547829.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:50.023Z,1520547830.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:50.123Z,1520547830.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:50.174Z,1520547830.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:50.493Z,1520547830.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:50.522Z,1520547830.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:50.893Z,1520547830.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:50.924Z,1520547830.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:51.293Z,1520547831.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:51.317Z,1520547831.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:51.679Z,1520547831.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:51.694Z,1520547831.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:52.080Z,1520547832.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:52.095Z,1520547832.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:52.478Z,1520547832.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:52.494Z,1520547832.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:52.881Z,1520547832.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:52.896Z,1520547832.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:53.293Z,1520547833.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:53.308Z,1520547833.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:53.685Z,1520547833.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:53.701Z,1520547833.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:54.081Z,1520547834.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:54.096Z,1520547834.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:54.483Z,1520547834.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:54.498Z,1520547834.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:54.882Z,1520547834.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:54.897Z,1520547834.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:55.283Z,1520547835.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:55.298Z,1520547835.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:55.683Z,1520547835.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:55.699Z,1520547835.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:56.085Z,1520547836.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:56.101Z,1520547836.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:56.483Z,1520547836.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:56.498Z,1520547836.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:56.889Z,1520547836.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:56.905Z,1520547836.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:57.282Z,1520547837.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:57.298Z,1520547837.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:57.675Z,1520547837.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:57.690Z,1520547837.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:58.085Z,1520547838.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:58.100Z,1520547838.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:58.483Z,1520547838.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:58.498Z,1520547838.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:58.884Z,1520547838.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:58.906Z,1520547838.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:59.289Z,1520547839.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:59.305Z,1520547839.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:23:59.685Z,1520547839.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:23:59.700Z,1520547839.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:00.081Z,1520547840.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:00.096Z,1520547840.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:00.484Z,1520547840.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:00.500Z,1520547840.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:00.880Z,1520547840.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:00.895Z,1520547840.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:01.276Z,1520547841.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:01.291Z,1520547841.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:01.684Z,1520547841.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:01.699Z,1520547841.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:02.087Z,1520547842.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:02.102Z,1520547842.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:02.484Z,1520547842.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:02.506Z,1520547842.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:02.886Z,1520547842.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:02.901Z,1520547842.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:03.279Z,1520547843.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:03.302Z,1520547843.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:03.682Z,1520547843.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:03.698Z,1520547843.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:04.084Z,1520547844.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:04.100Z,1520547844.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:04.479Z,1520547844.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:04.494Z,1520547844.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:04.889Z,1520547844.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:04.905Z,1520547844.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:05.289Z,1520547845.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:05.305Z,1520547845.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:05.689Z,1520547845.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:05.704Z,1520547845.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:06.083Z,1520547846.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:06.098Z,1520547846.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:06.481Z,1520547846.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:06.496Z,1520547846.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:06.885Z,1520547846.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:06.900Z,1520547846.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:07.284Z,1520547847.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:07.299Z,1520547847.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:07.684Z,1520547847.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:07.700Z,1520547847.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:08.058Z,1520547848.058 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T22:24:08.058Z,1520547848.058 [NAL9602] Data Fault, FailCount= 1
2018-03-08T22:24:08.058Z,1520547848.058 [NAL9602](ERROR): Data Fault
2018-03-08T22:24:08.094Z,1520547848.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:08.130Z,1520547848.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:08.144Z,1520547848.144 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T22:24:08.454Z,1520547848.454 [NAL9602](INFO): Powering down
2018-03-08T22:24:08.478Z,1520547848.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:08.493Z,1520547848.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:08.870Z,1520547848.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:08.909Z,1520547848.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:09.283Z,1520547849.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:09.302Z,1520547849.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:09.315Z,1520547849.315 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T22:24:09.316Z,1520547849.316 [NAL9602] No Fault, FailCount= 1
2018-03-08T22:24:09.682Z,1520547849.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:09.698Z,1520547849.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:10.068Z,1520547850.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:10.092Z,1520547850.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:10.474Z,1520547850.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:10.501Z,1520547850.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:10.866Z,1520547850.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:10.905Z,1520547850.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:11.264Z,1520547851.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:11.287Z,1520547851.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:11.675Z,1520547851.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:11.702Z,1520547851.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:12.070Z,1520547852.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:12.085Z,1520547852.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:12.470Z,1520547852.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:12.485Z,1520547852.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:12.875Z,1520547852.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:12.894Z,1520547852.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:13.278Z,1520547853.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:13.293Z,1520547853.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:13.675Z,1520547853.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:13.691Z,1520547853.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:14.082Z,1520547854.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:14.118Z,1520547854.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:14.475Z,1520547854.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:14.490Z,1520547854.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:14.875Z,1520547854.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:14.890Z,1520547854.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:15.275Z,1520547855.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:15.349Z,1520547855.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:15.670Z,1520547855.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:15.709Z,1520547855.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:16.068Z,1520547856.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:16.083Z,1520547856.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:16.482Z,1520547856.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:16.514Z,1520547856.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:16.870Z,1520547856.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:16.885Z,1520547856.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:17.271Z,1520547857.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:17.287Z,1520547857.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:17.678Z,1520547857.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:17.712Z,1520547857.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:18.078Z,1520547858.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:18.115Z,1520547858.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:18.472Z,1520547858.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:18.487Z,1520547858.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:18.878Z,1520547858.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:18.915Z,1520547858.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:19.278Z,1520547859.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:19.293Z,1520547859.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:19.678Z,1520547859.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:19.693Z,1520547859.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:20.077Z,1520547860.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:20.093Z,1520547860.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:20.479Z,1520547860.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:20.495Z,1520547860.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:20.871Z,1520547860.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:20.887Z,1520547860.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:21.276Z,1520547861.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:21.291Z,1520547861.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:21.679Z,1520547861.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:21.694Z,1520547861.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:22.070Z,1520547862.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:22.086Z,1520547862.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:22.475Z,1520547862.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:22.495Z,1520547862.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:22.879Z,1520547862.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:22.894Z,1520547862.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:23.273Z,1520547863.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:23.288Z,1520547863.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:23.679Z,1520547863.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:23.699Z,1520547863.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:24.079Z,1520547864.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:24.094Z,1520547864.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:24.475Z,1520547864.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:24.490Z,1520547864.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:24.879Z,1520547864.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:24.898Z,1520547864.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:25.280Z,1520547865.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:25.295Z,1520547865.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:25.679Z,1520547865.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:25.694Z,1520547865.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:26.076Z,1520547866.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:26.103Z,1520547866.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:26.482Z,1520547866.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:26.497Z,1520547866.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:26.875Z,1520547866.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:26.891Z,1520547866.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:27.277Z,1520547867.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:27.297Z,1520547867.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:27.678Z,1520547867.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:27.693Z,1520547867.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:28.077Z,1520547868.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:28.092Z,1520547868.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:28.478Z,1520547868.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:28.494Z,1520547868.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:28.878Z,1520547868.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:28.893Z,1520547868.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:29.275Z,1520547869.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:29.291Z,1520547869.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:29.673Z,1520547869.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:29.696Z,1520547869.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:30.078Z,1520547870.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:30.104Z,1520547870.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:30.478Z,1520547870.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:30.493Z,1520547870.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:30.873Z,1520547870.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:30.896Z,1520547870.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:31.278Z,1520547871.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:31.293Z,1520547871.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:31.682Z,1520547871.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:31.697Z,1520547871.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:32.078Z,1520547872.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:32.095Z,1520547872.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:32.478Z,1520547872.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:32.493Z,1520547872.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:32.877Z,1520547872.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:32.892Z,1520547872.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:33.282Z,1520547873.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:33.302Z,1520547873.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:33.682Z,1520547873.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:33.697Z,1520547873.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:34.075Z,1520547874.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:34.095Z,1520547874.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:34.473Z,1520547874.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:34.498Z,1520547874.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:34.883Z,1520547874.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:34.898Z,1520547874.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:35.264Z,1520547875.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:35.299Z,1520547875.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:35.683Z,1520547875.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:35.698Z,1520547875.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:36.066Z,1520547876.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:36.093Z,1520547876.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:36.483Z,1520547876.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:36.498Z,1520547876.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:36.873Z,1520547876.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:36.898Z,1520547876.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:37.279Z,1520547877.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:37.294Z,1520547877.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:37.683Z,1520547877.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:37.699Z,1520547877.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:38.079Z,1520547878.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:38.098Z,1520547878.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:38.479Z,1520547878.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:38.494Z,1520547878.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:38.852Z,1520547878.852 [NAL9602](INFO): Powering up NAL9602
2018-03-08T22:24:38.882Z,1520547878.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:38.898Z,1520547878.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:39.278Z,1520547879.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:39.294Z,1520547879.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:39.679Z,1520547879.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:39.706Z,1520547879.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:40.064Z,1520547880.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:40.100Z,1520547880.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:40.477Z,1520547880.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:40.499Z,1520547880.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:40.882Z,1520547880.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:40.898Z,1520547880.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:41.268Z,1520547881.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:41.295Z,1520547881.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:41.673Z,1520547881.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:41.706Z,1520547881.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:42.082Z,1520547882.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:42.097Z,1520547882.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:42.483Z,1520547882.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:42.498Z,1520547882.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:42.873Z,1520547882.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:42.897Z,1520547882.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:43.278Z,1520547883.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:43.293Z,1520547883.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:43.679Z,1520547883.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:43.695Z,1520547883.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:44.077Z,1520547884.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:44.105Z,1520547884.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:44.483Z,1520547884.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:44.499Z,1520547884.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:44.868Z,1520547884.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:44.895Z,1520547884.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:45.274Z,1520547885.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:45.301Z,1520547885.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:45.671Z,1520547885.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:45.698Z,1520547885.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:46.069Z,1520547886.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:46.096Z,1520547886.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:46.476Z,1520547886.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:46.503Z,1520547886.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:46.871Z,1520547886.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:46.903Z,1520547886.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:47.271Z,1520547887.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:47.298Z,1520547887.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:50.403Z,1520547890.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:50.418Z,1520547890.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:50.522Z,1520547890.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:50.554Z,1520547890.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:50.854Z,1520547890.854 [NAL9602](INFO): NAL9602 initialized
2018-03-08T22:24:50.871Z,1520547890.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:50.898Z,1520547890.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:51.271Z,1520547891.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:51.286Z,1520547891.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:51.681Z,1520547891.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:51.713Z,1520547891.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:52.089Z,1520547892.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:52.114Z,1520547892.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:52.488Z,1520547892.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:52.517Z,1520547892.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:52.875Z,1520547892.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:52.891Z,1520547892.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:53.276Z,1520547893.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:53.292Z,1520547893.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:53.681Z,1520547893.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:53.696Z,1520547893.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:54.089Z,1520547894.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:54.120Z,1520547894.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:54.485Z,1520547894.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:54.500Z,1520547894.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:54.876Z,1520547894.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:54.891Z,1520547894.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:55.276Z,1520547895.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:55.291Z,1520547895.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:55.681Z,1520547895.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:55.697Z,1520547895.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:56.089Z,1520547896.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:56.104Z,1520547896.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:56.488Z,1520547896.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:56.503Z,1520547896.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:56.879Z,1520547896.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:56.894Z,1520547896.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:57.274Z,1520547897.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:57.289Z,1520547897.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:57.681Z,1520547897.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:57.697Z,1520547897.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:58.082Z,1520547898.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:58.097Z,1520547898.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:58.480Z,1520547898.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:58.502Z,1520547898.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:58.880Z,1520547898.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:58.895Z,1520547898.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:59.275Z,1520547899.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:59.290Z,1520547899.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:24:59.679Z,1520547899.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:24:59.702Z,1520547899.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:00.081Z,1520547900.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:00.097Z,1520547900.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:00.481Z,1520547900.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:00.496Z,1520547900.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:00.877Z,1520547900.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:00.892Z,1520547900.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:01.278Z,1520547901.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:01.293Z,1520547901.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:01.680Z,1520547901.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:01.695Z,1520547901.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:02.081Z,1520547902.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:02.096Z,1520547902.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:02.481Z,1520547902.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:02.497Z,1520547902.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:02.877Z,1520547902.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:02.892Z,1520547902.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:03.274Z,1520547903.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:03.289Z,1520547903.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:03.681Z,1520547903.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:03.697Z,1520547903.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:04.081Z,1520547904.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:04.096Z,1520547904.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:04.480Z,1520547904.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:04.502Z,1520547904.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:04.879Z,1520547904.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:04.896Z,1520547904.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:05.278Z,1520547905.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:05.293Z,1520547905.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:05.681Z,1520547905.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:05.696Z,1520547905.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:06.085Z,1520547906.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:06.100Z,1520547906.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:06.481Z,1520547906.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:06.497Z,1520547906.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:06.878Z,1520547906.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:06.893Z,1520547906.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:07.278Z,1520547907.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:07.293Z,1520547907.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:07.682Z,1520547907.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:07.697Z,1520547907.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:08.080Z,1520547908.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:08.095Z,1520547908.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:08.485Z,1520547908.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:08.501Z,1520547908.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:08.879Z,1520547908.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:08.898Z,1520547908.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:09.278Z,1520547909.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:09.293Z,1520547909.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:09.685Z,1520547909.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:09.701Z,1520547909.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:10.085Z,1520547910.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:10.100Z,1520547910.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:10.484Z,1520547910.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:10.499Z,1520547910.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:10.880Z,1520547910.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:10.896Z,1520547910.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:11.273Z,1520547911.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:11.293Z,1520547911.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:11.683Z,1520547911.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:11.699Z,1520547911.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:12.085Z,1520547912.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:12.101Z,1520547912.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:12.484Z,1520547912.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:12.499Z,1520547912.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:12.879Z,1520547912.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:12.894Z,1520547912.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:13.280Z,1520547913.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:13.295Z,1520547913.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:13.684Z,1520547913.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:13.699Z,1520547913.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:14.085Z,1520547914.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:14.100Z,1520547914.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:14.487Z,1520547914.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:14.506Z,1520547914.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:14.876Z,1520547914.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:14.898Z,1520547914.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:15.275Z,1520547915.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:15.290Z,1520547915.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:15.685Z,1520547915.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:15.701Z,1520547915.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:16.089Z,1520547916.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:16.104Z,1520547916.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:16.485Z,1520547916.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:16.500Z,1520547916.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:16.875Z,1520547916.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:16.896Z,1520547916.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:17.280Z,1520547917.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:17.295Z,1520547917.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:17.684Z,1520547917.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:17.699Z,1520547917.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:18.086Z,1520547918.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:18.106Z,1520547918.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:18.484Z,1520547918.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:18.500Z,1520547918.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:18.879Z,1520547918.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:18.894Z,1520547918.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:19.281Z,1520547919.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:19.297Z,1520547919.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:19.684Z,1520547919.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:19.700Z,1520547919.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:20.085Z,1520547920.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:20.100Z,1520547920.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:20.485Z,1520547920.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:20.507Z,1520547920.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:20.879Z,1520547920.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:20.895Z,1520547920.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:21.274Z,1520547921.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:21.290Z,1520547921.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:21.689Z,1520547921.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:21.704Z,1520547921.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:22.089Z,1520547922.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:22.104Z,1520547922.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:22.489Z,1520547922.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:22.504Z,1520547922.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:22.877Z,1520547922.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:22.892Z,1520547922.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:23.269Z,1520547923.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:23.302Z,1520547923.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:23.686Z,1520547923.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:23.706Z,1520547923.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:24.086Z,1520547924.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:24.102Z,1520547924.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:24.484Z,1520547924.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:24.507Z,1520547924.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:24.881Z,1520547924.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:24.896Z,1520547924.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:25.264Z,1520547925.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:25.292Z,1520547925.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:25.693Z,1520547925.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:25.709Z,1520547925.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:26.095Z,1520547926.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:26.109Z,1520547926.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:26.491Z,1520547926.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:26.506Z,1520547926.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:26.871Z,1520547926.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:26.898Z,1520547926.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:27.266Z,1520547927.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:27.304Z,1520547927.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:27.689Z,1520547927.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:27.705Z,1520547927.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:28.089Z,1520547928.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:28.105Z,1520547928.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:28.485Z,1520547928.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:28.501Z,1520547928.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:28.872Z,1520547928.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:28.900Z,1520547928.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:29.267Z,1520547929.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:29.293Z,1520547929.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:29.684Z,1520547929.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:29.705Z,1520547929.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:30.086Z,1520547930.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:30.101Z,1520547930.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:30.489Z,1520547930.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:30.504Z,1520547930.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:30.871Z,1520547930.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:30.899Z,1520547930.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:31.264Z,1520547931.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:31.292Z,1520547931.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:31.690Z,1520547931.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:31.705Z,1520547931.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:32.085Z,1520547932.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:32.111Z,1520547932.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:32.490Z,1520547932.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:32.505Z,1520547932.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:32.867Z,1520547932.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:32.895Z,1520547932.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:33.270Z,1520547933.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:33.306Z,1520547933.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:33.691Z,1520547933.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:33.707Z,1520547933.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:34.090Z,1520547934.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:34.105Z,1520547934.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:34.472Z,1520547934.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:34.506Z,1520547934.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:34.871Z,1520547934.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:34.908Z,1520547934.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:35.270Z,1520547935.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:35.302Z,1520547935.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:35.678Z,1520547935.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:35.711Z,1520547935.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:36.073Z,1520547936.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:36.107Z,1520547936.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:36.481Z,1520547936.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:36.508Z,1520547936.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:36.867Z,1520547936.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:36.910Z,1520547936.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:37.264Z,1520547937.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:37.279Z,1520547937.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:37.681Z,1520547937.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:37.708Z,1520547937.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:38.081Z,1520547938.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:38.109Z,1520547938.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:38.481Z,1520547938.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:38.510Z,1520547938.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:38.875Z,1520547938.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:38.910Z,1520547938.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:39.282Z,1520547939.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:39.314Z,1520547939.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:39.681Z,1520547939.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:39.709Z,1520547939.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:40.098Z,1520547940.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:40.113Z,1520547940.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:40.486Z,1520547940.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:40.518Z,1520547940.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:40.871Z,1520547940.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:40.887Z,1520547940.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:41.268Z,1520547941.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:41.319Z,1520547941.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:41.679Z,1520547941.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:41.745Z,1520547941.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:42.090Z,1520547942.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:42.105Z,1520547942.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:42.488Z,1520547942.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:42.513Z,1520547942.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:42.869Z,1520547942.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:42.919Z,1520547942.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:43.267Z,1520547943.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:43.283Z,1520547943.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:43.681Z,1520547943.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:43.707Z,1520547943.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:44.081Z,1520547944.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:44.114Z,1520547944.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:44.484Z,1520547944.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:44.527Z,1520547944.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:44.877Z,1520547944.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:44.892Z,1520547944.892 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:44.892Z,1520547944.892 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 293
2018-03-08T22:25:44.892Z,1520547944.892 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T22:25:44.894Z,1520547944.894 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:44.894Z,1520547944.894 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 293
2018-03-08T22:25:44.894Z,1520547944.894 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T22:25:44.896Z,1520547944.896 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:44.896Z,1520547944.896 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 293
2018-03-08T22:25:44.896Z,1520547944.896 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T22:25:44.928Z,1520547944.928 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T22:25:44.928Z,1520547944.928 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T22:25:44.933Z,1520547944.933 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T22:25:45.269Z,1520547945.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:45.367Z,1520547945.367 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T22:25:45.367Z,1520547945.367 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 293
2018-03-08T22:25:45.367Z,1520547945.367 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T22:25:45.367Z,1520547945.367 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 293
2018-03-08T22:25:45.368Z,1520547945.368 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T22:25:45.368Z,1520547945.368 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 293
2018-03-08T22:25:45.690Z,1520547945.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:45.704Z,1520547945.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T22:25:45.705Z,1520547945.705 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:25:45.705Z,1520547945.705 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:25:45.706Z,1520547945.706 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T22:25:45.706Z,1520547945.706 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:25:45.706Z,1520547945.706 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:25:45.707Z,1520547945.707 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T22:25:45.707Z,1520547945.707 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:25:45.707Z,1520547945.707 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:25:46.089Z,1520547946.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:46.111Z,1520547946.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T22:25:46.112Z,1520547946.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:46.491Z,1520547946.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:46.505Z,1520547946.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T22:25:46.506Z,1520547946.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:46.867Z,1520547946.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:46.898Z,1520547946.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T22:25:46.899Z,1520547946.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:47.270Z,1520547947.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:47.303Z,1520547947.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T22:25:47.304Z,1520547947.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:47.681Z,1520547947.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:47.707Z,1520547947.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T22:25:47.708Z,1520547947.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:51.462Z,1520547951.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:51.477Z,1520547951.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2018-03-08T22:25:51.478Z,1520547951.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:51.615Z,1520547951.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:51.644Z,1520547951.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T22:25:51.649Z,1520547951.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:51.993Z,1520547951.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:52.008Z,1520547952.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2018-03-08T22:25:52.025Z,1520547952.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:52.396Z,1520547952.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:52.423Z,1520547952.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-03-08T22:25:52.424Z,1520547952.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:52.817Z,1520547952.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:52.833Z,1520547952.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2018-03-08T22:25:52.834Z,1520547952.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:53.183Z,1520547953.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:53.215Z,1520547953.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-03-08T22:25:53.216Z,1520547953.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:53.587Z,1520547953.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:53.618Z,1520547953.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-03-08T22:25:53.619Z,1520547953.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:53.998Z,1520547953.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:54.026Z,1520547954.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-03-08T22:25:54.027Z,1520547954.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:54.398Z,1520547954.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:54.425Z,1520547954.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-03-08T22:25:54.426Z,1520547954.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:54.796Z,1520547954.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:54.827Z,1520547954.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-03-08T22:25:54.828Z,1520547954.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:55.191Z,1520547955.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:55.230Z,1520547955.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-03-08T22:25:55.231Z,1520547955.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:55.590Z,1520547955.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:55.605Z,1520547955.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-03-08T22:25:55.606Z,1520547955.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:55.991Z,1520547955.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:56.006Z,1520547956.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2018-03-08T22:25:56.007Z,1520547956.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:56.387Z,1520547956.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:56.408Z,1520547956.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2018-03-08T22:25:56.409Z,1520547956.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:56.805Z,1520547956.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:56.837Z,1520547956.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2018-03-08T22:25:56.838Z,1520547956.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:57.205Z,1520547957.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:57.236Z,1520547957.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2018-03-08T22:25:57.237Z,1520547957.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:57.605Z,1520547957.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:57.620Z,1520547957.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2018-03-08T22:25:57.642Z,1520547957.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:57.991Z,1520547957.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:58.006Z,1520547958.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2018-03-08T22:25:58.006Z,1520547958.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:58.388Z,1520547958.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:58.402Z,1520547958.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2018-03-08T22:25:58.403Z,1520547958.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:58.790Z,1520547958.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:58.810Z,1520547958.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2018-03-08T22:25:58.811Z,1520547958.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:59.195Z,1520547959.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:59.209Z,1520547959.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2018-03-08T22:25:59.210Z,1520547959.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:59.594Z,1520547959.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:25:59.609Z,1520547959.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-03-08T22:25:59.610Z,1520547959.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:25:59.997Z,1520547959.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:00.012Z,1520547960.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2018-03-08T22:26:00.013Z,1520547960.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:00.395Z,1520547960.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:00.414Z,1520547960.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-03-08T22:26:00.415Z,1520547960.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:00.797Z,1520547960.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:00.812Z,1520547960.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2018-03-08T22:26:00.813Z,1520547960.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:01.191Z,1520547961.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:01.206Z,1520547961.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2018-03-08T22:26:01.207Z,1520547961.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:01.593Z,1520547961.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:01.608Z,1520547961.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2018-03-08T22:26:01.609Z,1520547961.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:01.996Z,1520547961.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:02.011Z,1520547962.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2018-03-08T22:26:02.012Z,1520547962.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:02.391Z,1520547962.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:02.405Z,1520547962.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2018-03-08T22:26:02.406Z,1520547962.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:02.797Z,1520547962.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:02.812Z,1520547962.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2018-03-08T22:26:02.813Z,1520547962.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:03.201Z,1520547963.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:03.216Z,1520547963.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-03-08T22:26:03.217Z,1520547963.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:03.597Z,1520547963.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:03.612Z,1520547963.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-03-08T22:26:03.613Z,1520547963.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:03.994Z,1520547963.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:04.009Z,1520547964.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-03-08T22:26:04.010Z,1520547964.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:04.395Z,1520547964.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:04.410Z,1520547964.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-03-08T22:26:04.411Z,1520547964.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:04.791Z,1520547964.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:04.814Z,1520547964.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-03-08T22:26:04.814Z,1520547964.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:05.194Z,1520547965.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:05.209Z,1520547965.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:05.594Z,1520547965.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:05.610Z,1520547965.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:05.998Z,1520547965.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:06.014Z,1520547966.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:06.401Z,1520547966.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:06.416Z,1520547966.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:06.797Z,1520547966.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:06.813Z,1520547966.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:07.191Z,1520547967.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:07.206Z,1520547967.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:07.591Z,1520547967.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:07.642Z,1520547967.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:07.995Z,1520547967.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:08.011Z,1520547968.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:08.394Z,1520547968.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:08.409Z,1520547968.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:08.797Z,1520547968.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:08.812Z,1520547968.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:09.201Z,1520547969.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:09.216Z,1520547969.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:09.650Z,1520547969.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:09.711Z,1520547969.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:09.993Z,1520547969.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:10.008Z,1520547970.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:10.394Z,1520547970.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:10.414Z,1520547970.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:10.801Z,1520547970.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:10.817Z,1520547970.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:11.194Z,1520547971.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:11.209Z,1520547971.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:11.595Z,1520547971.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:11.643Z,1520547971.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:11.997Z,1520547971.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:12.013Z,1520547972.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:12.401Z,1520547972.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:12.416Z,1520547972.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:12.802Z,1520547972.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:12.817Z,1520547972.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:13.194Z,1520547973.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:13.209Z,1520547973.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:13.594Z,1520547973.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:13.609Z,1520547973.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:13.996Z,1520547973.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:14.011Z,1520547974.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:14.395Z,1520547974.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:14.410Z,1520547974.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:14.797Z,1520547974.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:14.812Z,1520547974.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:15.201Z,1520547975.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:15.217Z,1520547975.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:15.598Z,1520547975.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:15.613Z,1520547975.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:15.990Z,1520547975.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:16.005Z,1520547976.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:16.395Z,1520547976.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:16.418Z,1520547976.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:16.790Z,1520547976.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:16.806Z,1520547976.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:17.191Z,1520547977.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:17.206Z,1520547977.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:17.595Z,1520547977.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:17.611Z,1520547977.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:17.997Z,1520547977.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:18.013Z,1520547978.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:18.401Z,1520547978.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:18.416Z,1520547978.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:18.801Z,1520547978.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:18.817Z,1520547978.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:19.194Z,1520547979.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:19.209Z,1520547979.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:19.593Z,1520547979.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:19.608Z,1520547979.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:19.996Z,1520547979.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:20.012Z,1520547980.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:20.394Z,1520547980.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:20.414Z,1520547980.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:20.797Z,1520547980.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:20.812Z,1520547980.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:21.201Z,1520547981.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:21.217Z,1520547981.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:21.597Z,1520547981.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:21.612Z,1520547981.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:21.990Z,1520547981.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:22.005Z,1520547982.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:22.395Z,1520547982.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:22.411Z,1520547982.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:22.791Z,1520547982.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:22.806Z,1520547982.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:23.195Z,1520547983.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:23.210Z,1520547983.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:23.595Z,1520547983.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:23.618Z,1520547983.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:23.997Z,1520547983.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:24.013Z,1520547984.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:24.401Z,1520547984.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:24.416Z,1520547984.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:24.802Z,1520547984.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:24.817Z,1520547984.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:25.195Z,1520547985.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:25.211Z,1520547985.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:25.591Z,1520547985.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:25.606Z,1520547985.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:25.997Z,1520547985.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:26.013Z,1520547986.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:26.392Z,1520547986.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:26.414Z,1520547986.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:26.798Z,1520547986.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:26.813Z,1520547986.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:27.204Z,1520547987.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:27.228Z,1520547987.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:27.600Z,1520547987.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:27.615Z,1520547987.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:27.996Z,1520547987.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:28.011Z,1520547988.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:28.390Z,1520547988.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:28.418Z,1520547988.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:28.795Z,1520547988.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:28.819Z,1520547988.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:29.193Z,1520547989.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:29.208Z,1520547989.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:29.597Z,1520547989.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:29.612Z,1520547989.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:30.005Z,1520547990.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:30.027Z,1520547990.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:30.405Z,1520547990.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:30.421Z,1520547990.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:30.802Z,1520547990.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:30.818Z,1520547990.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:31.209Z,1520547991.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:31.247Z,1520547991.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:31.605Z,1520547991.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:31.627Z,1520547991.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:31.987Z,1520547991.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:32.017Z,1520547992.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:32.383Z,1520547992.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:32.445Z,1520547992.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:32.813Z,1520547992.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:32.840Z,1520547992.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:33.197Z,1520547993.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:33.231Z,1520547993.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:33.601Z,1520547993.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:33.626Z,1520547993.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:33.991Z,1520547993.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:34.035Z,1520547994.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:34.387Z,1520547994.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:34.402Z,1520547994.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:34.798Z,1520547994.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:34.837Z,1520547994.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:35.187Z,1520547995.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:35.202Z,1520547995.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:35.591Z,1520547995.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:35.606Z,1520547995.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:36.001Z,1520547996.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:36.033Z,1520547996.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:36.405Z,1520547996.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:36.436Z,1520547996.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:36.790Z,1520547996.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:36.810Z,1520547996.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:37.188Z,1520547997.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:37.210Z,1520547997.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:37.591Z,1520547997.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:37.606Z,1520547997.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:37.992Z,1520547997.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:38.007Z,1520547998.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:38.392Z,1520547998.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:38.407Z,1520547998.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:38.806Z,1520547998.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:38.833Z,1520547998.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:39.193Z,1520547999.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:39.208Z,1520547999.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:39.605Z,1520547999.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:39.636Z,1520547999.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:39.989Z,1520547999.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:40.004Z,1520548000.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:40.392Z,1520548000.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:40.407Z,1520548000.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:40.791Z,1520548000.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:40.811Z,1520548000.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:41.190Z,1520548001.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:41.205Z,1520548001.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:41.590Z,1520548001.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:41.606Z,1520548001.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:41.995Z,1520548001.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:42.044Z,1520548002.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:42.405Z,1520548002.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:42.420Z,1520548002.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:42.793Z,1520548002.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:42.808Z,1520548002.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:43.190Z,1520548003.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:43.205Z,1520548003.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:43.589Z,1520548003.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:43.604Z,1520548003.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:43.991Z,1520548003.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:44.006Z,1520548004.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:44.386Z,1520548004.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:44.409Z,1520548004.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:44.805Z,1520548004.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:44.820Z,1520548004.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:45.193Z,1520548005.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:45.208Z,1520548005.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:45.605Z,1520548005.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:45.620Z,1520548005.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:46.039Z,1520548006.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:46.071Z,1520548006.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:46.395Z,1520548006.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:46.410Z,1520548006.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:46.791Z,1520548006.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:46.806Z,1520548006.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:47.191Z,1520548007.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:47.206Z,1520548007.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:47.594Z,1520548007.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:47.609Z,1520548007.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:47.997Z,1520548007.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:48.013Z,1520548008.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:51.113Z,1520548011.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:51.142Z,1520548011.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:51.249Z,1520548011.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:51.290Z,1520548011.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:51.596Z,1520548011.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:51.611Z,1520548011.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:51.996Z,1520548011.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:52.011Z,1520548012.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:52.400Z,1520548012.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:52.415Z,1520548012.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:52.801Z,1520548012.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:52.817Z,1520548012.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:53.209Z,1520548013.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:53.224Z,1520548013.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:53.601Z,1520548013.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:53.617Z,1520548013.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:53.996Z,1520548013.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:54.011Z,1520548014.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:54.395Z,1520548014.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:54.410Z,1520548014.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:54.788Z,1520548014.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:54.812Z,1520548014.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:55.199Z,1520548015.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:55.218Z,1520548015.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:55.599Z,1520548015.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:55.613Z,1520548015.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:56.001Z,1520548016.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:56.016Z,1520548016.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:56.405Z,1520548016.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:56.420Z,1520548016.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:56.801Z,1520548016.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:56.841Z,1520548016.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:57.188Z,1520548017.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:57.218Z,1520548017.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:57.595Z,1520548017.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:57.610Z,1520548017.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:57.996Z,1520548017.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:58.018Z,1520548018.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:58.392Z,1520548018.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:58.407Z,1520548018.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:58.801Z,1520548018.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:58.817Z,1520548018.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:59.205Z,1520548019.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:59.220Z,1520548019.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:59.601Z,1520548019.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:26:59.617Z,1520548019.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:26:59.995Z,1520548019.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:00.010Z,1520548020.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:00.396Z,1520548020.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:00.411Z,1520548020.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:00.789Z,1520548020.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:00.812Z,1520548020.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:01.211Z,1520548021.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:01.243Z,1520548021.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:01.600Z,1520548021.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:01.615Z,1520548021.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:02.005Z,1520548022.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:02.021Z,1520548022.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:02.408Z,1520548022.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:02.423Z,1520548022.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:02.810Z,1520548022.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:02.825Z,1520548022.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:03.193Z,1520548023.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:03.212Z,1520548023.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:03.600Z,1520548023.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:03.616Z,1520548023.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:04.002Z,1520548024.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:04.017Z,1520548024.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:04.400Z,1520548024.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:04.415Z,1520548024.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:04.805Z,1520548024.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:04.821Z,1520548024.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:05.209Z,1520548025.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:05.224Z,1520548025.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:05.611Z,1520548025.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:05.651Z,1520548025.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:05.995Z,1520548025.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:06.018Z,1520548026.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:06.401Z,1520548026.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:06.416Z,1520548026.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:06.784Z,1520548026.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:06.817Z,1520548026.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:07.202Z,1520548027.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:07.219Z,1520548027.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:07.596Z,1520548027.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:07.612Z,1520548027.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:08.004Z,1520548028.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:08.041Z,1520548028.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:08.409Z,1520548028.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:08.427Z,1520548028.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:08.809Z,1520548028.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:08.825Z,1520548028.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:09.189Z,1520548029.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:09.213Z,1520548029.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:09.596Z,1520548029.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:09.611Z,1520548029.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:09.997Z,1520548029.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:10.012Z,1520548030.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:10.402Z,1520548030.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:10.417Z,1520548030.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:10.806Z,1520548030.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:10.821Z,1520548030.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:11.209Z,1520548031.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:11.224Z,1520548031.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:11.609Z,1520548031.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:11.624Z,1520548031.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:11.999Z,1520548031.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:12.014Z,1520548032.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:12.396Z,1520548032.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:12.411Z,1520548032.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:12.784Z,1520548032.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:12.819Z,1520548032.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:13.193Z,1520548033.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:13.222Z,1520548033.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:13.600Z,1520548033.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:13.615Z,1520548033.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:14.005Z,1520548034.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:14.026Z,1520548034.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:14.408Z,1520548034.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:14.424Z,1520548034.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:14.809Z,1520548034.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:14.830Z,1520548034.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:15.181Z,1520548035.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:15.208Z,1520548035.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:15.591Z,1520548035.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:15.613Z,1520548035.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:15.996Z,1520548035.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:16.018Z,1520548036.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:16.384Z,1520548036.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:16.415Z,1520548036.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:16.808Z,1520548036.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:16.823Z,1520548036.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:17.209Z,1520548037.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:17.224Z,1520548037.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:17.608Z,1520548037.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:17.623Z,1520548037.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:17.999Z,1520548037.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:18.018Z,1520548038.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:18.399Z,1520548038.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:18.414Z,1520548038.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:18.784Z,1520548038.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:18.815Z,1520548038.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:19.193Z,1520548039.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:19.215Z,1520548039.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:19.599Z,1520548039.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:19.614Z,1520548039.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:20.006Z,1520548040.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:20.021Z,1520548040.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:20.408Z,1520548040.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:20.423Z,1520548040.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:20.809Z,1520548040.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:20.824Z,1520548040.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:21.184Z,1520548041.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:21.219Z,1520548041.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:21.598Z,1520548041.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:21.614Z,1520548041.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:21.988Z,1520548041.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:22.015Z,1520548042.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:22.384Z,1520548042.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:22.415Z,1520548042.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:22.810Z,1520548042.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:22.825Z,1520548042.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:23.210Z,1520548043.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:23.225Z,1520548043.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:23.609Z,1520548043.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:23.625Z,1520548043.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:23.987Z,1520548043.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:24.019Z,1520548044.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:24.390Z,1520548044.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:24.423Z,1520548044.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:24.785Z,1520548044.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:24.817Z,1520548044.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:25.187Z,1520548045.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:25.203Z,1520548045.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:25.595Z,1520548045.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:25.632Z,1520548045.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:25.993Z,1520548045.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:26.021Z,1520548046.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:26.409Z,1520548046.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:26.438Z,1520548046.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:26.805Z,1520548046.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:26.838Z,1520548046.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:27.184Z,1520548047.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:27.199Z,1520548047.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:27.594Z,1520548047.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:27.630Z,1520548047.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:27.992Z,1520548047.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:28.007Z,1520548048.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:28.395Z,1520548048.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:28.415Z,1520548048.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:28.810Z,1520548048.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:28.840Z,1520548048.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:29.205Z,1520548049.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:29.220Z,1520548049.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:29.609Z,1520548049.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:29.639Z,1520548049.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:29.994Z,1520548049.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:30.009Z,1520548050.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:30.396Z,1520548050.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:30.418Z,1520548050.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:30.787Z,1520548050.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:30.815Z,1520548050.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:31.198Z,1520548051.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:31.218Z,1520548051.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:31.596Z,1520548051.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:31.618Z,1520548051.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:31.997Z,1520548051.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:32.025Z,1520548052.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:32.405Z,1520548052.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:32.420Z,1520548052.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:32.805Z,1520548052.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:32.826Z,1520548052.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:33.189Z,1520548053.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:33.208Z,1520548053.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:33.594Z,1520548053.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:33.614Z,1520548053.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:33.997Z,1520548053.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:34.012Z,1520548054.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:34.395Z,1520548054.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:34.418Z,1520548054.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:34.804Z,1520548054.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:34.826Z,1520548054.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:35.205Z,1520548055.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:35.221Z,1520548055.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:35.604Z,1520548055.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:35.626Z,1520548055.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:35.998Z,1520548055.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:36.018Z,1520548056.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:36.400Z,1520548056.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:36.415Z,1520548056.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:36.787Z,1520548056.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:36.819Z,1520548056.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:37.193Z,1520548057.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:37.213Z,1520548057.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:37.593Z,1520548057.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:37.615Z,1520548057.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:38.005Z,1520548058.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:38.020Z,1520548058.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:38.405Z,1520548058.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:38.421Z,1520548058.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:38.805Z,1520548058.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:38.821Z,1520548058.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:39.195Z,1520548059.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:39.214Z,1520548059.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:39.586Z,1520548059.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:39.621Z,1520548059.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:40.000Z,1520548060.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:40.016Z,1520548060.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:40.383Z,1520548060.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:40.419Z,1520548060.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:40.806Z,1520548060.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:40.821Z,1520548060.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:41.217Z,1520548061.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:41.238Z,1520548061.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:41.610Z,1520548061.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:41.625Z,1520548061.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:41.987Z,1520548061.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:42.019Z,1520548062.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:42.391Z,1520548062.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:42.420Z,1520548062.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:42.795Z,1520548062.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:42.835Z,1520548062.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:43.191Z,1520548063.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:43.241Z,1520548063.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:43.590Z,1520548063.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:43.629Z,1520548063.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:44.004Z,1520548064.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:44.043Z,1520548064.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:44.406Z,1520548064.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:44.436Z,1520548064.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:44.810Z,1520548064.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:44.836Z,1520548064.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:45.200Z,1520548065.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:45.233Z,1520548065.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:45.595Z,1520548065.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:45.611Z,1520548065.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:45.998Z,1520548065.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:46.013Z,1520548066.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:46.394Z,1520548066.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:46.418Z,1520548066.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:46.814Z,1520548066.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:46.845Z,1520548066.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:46.848Z,1520548066.848 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T22:27:46.848Z,1520548066.848 [Default:CheckIn:C.Wait] Stopped
2018-03-08T22:27:46.848Z,1520548066.848 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T22:27:46.848Z,1520548066.848 [Default:CheckIn:D] Running Loop=1
2018-03-08T22:27:47.222Z,1520548067.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:47.249Z,1520548067.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:47.252Z,1520548067.252 [Default:CheckIn:D] Stopped
2018-03-08T22:27:47.253Z,1520548067.253 [Default:CheckIn:E] Running Loop=1
2018-03-08T22:27:47.602Z,1520548067.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:47.641Z,1520548067.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:47.644Z,1520548067.644 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 882.040755 min 
2018-03-08T22:27:47.649Z,1520548067.649 [Default:CheckIn:E] Stopped
2018-03-08T22:27:47.649Z,1520548067.649 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T22:27:47.649Z,1520548067.649 [Default:CheckIn] Stopped
2018-03-08T22:27:47.649Z,1520548067.649 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T22:27:47.649Z,1520548067.649 [Default:CheckIn](INFO): Running loop #86
2018-03-08T22:27:47.649Z,1520548067.649 [Default:CheckIn] Running Loop=86
2018-03-08T22:27:47.650Z,1520548067.650 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T22:27:47.650Z,1520548067.650 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T22:27:48.001Z,1520548068.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:48.020Z,1520548068.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:51.097Z,1520548071.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:51.112Z,1520548071.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:51.206Z,1520548071.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:51.222Z,1520548071.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:51.581Z,1520548071.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:51.615Z,1520548071.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:51.977Z,1520548071.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:52.001Z,1520548072.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:52.377Z,1520548072.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:52.402Z,1520548072.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:52.767Z,1520548072.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:52.805Z,1520548072.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:53.167Z,1520548073.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:53.182Z,1520548073.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:53.564Z,1520548073.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:53.579Z,1520548073.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:53.977Z,1520548073.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:54.001Z,1520548074.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:54.381Z,1520548074.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:54.405Z,1520548074.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:54.777Z,1520548074.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:54.802Z,1520548074.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:55.163Z,1520548075.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:55.179Z,1520548075.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:55.567Z,1520548075.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:55.582Z,1520548075.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:55.966Z,1520548075.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:56.003Z,1520548076.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:56.360Z,1520548076.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:56.375Z,1520548076.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:56.777Z,1520548076.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:56.811Z,1520548076.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:57.173Z,1520548077.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:57.208Z,1520548077.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:57.578Z,1520548077.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:57.610Z,1520548077.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:57.963Z,1520548077.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:57.979Z,1520548077.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:58.364Z,1520548078.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:58.391Z,1520548078.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:58.770Z,1520548078.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:58.785Z,1520548078.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:59.167Z,1520548079.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:59.182Z,1520548079.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:59.571Z,1520548079.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:59.587Z,1520548079.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:27:59.972Z,1520548079.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:27:59.987Z,1520548079.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:00.377Z,1520548080.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:00.392Z,1520548080.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:00.774Z,1520548080.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:00.789Z,1520548080.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:01.172Z,1520548081.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:01.195Z,1520548081.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:01.570Z,1520548081.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:01.585Z,1520548081.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:01.971Z,1520548081.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:01.990Z,1520548081.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:02.370Z,1520548082.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:02.385Z,1520548082.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:02.773Z,1520548082.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:02.788Z,1520548082.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:03.176Z,1520548083.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:03.198Z,1520548083.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:03.576Z,1520548083.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:03.598Z,1520548083.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:03.971Z,1520548083.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:03.986Z,1520548083.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:04.370Z,1520548084.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:04.387Z,1520548084.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:04.767Z,1520548084.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:04.782Z,1520548084.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:05.176Z,1520548085.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:05.191Z,1520548085.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:05.570Z,1520548085.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:05.590Z,1520548085.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:05.978Z,1520548085.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:05.993Z,1520548085.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:06.376Z,1520548086.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:06.391Z,1520548086.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:06.810Z,1520548086.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:06.834Z,1520548086.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:07.168Z,1520548087.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:07.188Z,1520548087.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:07.576Z,1520548087.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:07.625Z,1520548087.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:07.972Z,1520548087.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:07.988Z,1520548087.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:08.371Z,1520548088.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:08.390Z,1520548088.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:08.777Z,1520548088.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:08.798Z,1520548088.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:09.173Z,1520548089.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:09.194Z,1520548089.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:09.569Z,1520548089.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:09.590Z,1520548089.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:09.962Z,1520548089.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:09.978Z,1520548089.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:10.386Z,1520548090.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:10.401Z,1520548090.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:10.760Z,1520548090.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:10.786Z,1520548090.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:11.161Z,1520548091.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:11.176Z,1520548091.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:11.559Z,1520548091.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:11.579Z,1520548091.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:11.973Z,1520548091.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:11.989Z,1520548091.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:12.373Z,1520548092.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:12.418Z,1520548092.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:12.789Z,1520548092.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:12.811Z,1520548092.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:13.167Z,1520548093.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:13.182Z,1520548093.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:13.567Z,1520548093.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:13.582Z,1520548093.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:13.973Z,1520548093.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:13.989Z,1520548093.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:14.367Z,1520548094.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:14.382Z,1520548094.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:14.773Z,1520548094.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:14.788Z,1520548094.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:15.173Z,1520548095.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:15.189Z,1520548095.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:15.573Z,1520548095.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:15.589Z,1520548095.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:15.968Z,1520548095.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:15.983Z,1520548095.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:16.370Z,1520548096.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:16.386Z,1520548096.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:16.770Z,1520548096.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:16.786Z,1520548096.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:17.172Z,1520548097.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:17.187Z,1520548097.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:17.569Z,1520548097.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:17.585Z,1520548097.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:17.972Z,1520548097.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:17.987Z,1520548097.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:18.374Z,1520548098.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:18.389Z,1520548098.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:18.778Z,1520548098.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:18.814Z,1520548098.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:19.170Z,1520548099.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:19.190Z,1520548099.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:19.573Z,1520548099.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:19.588Z,1520548099.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:19.971Z,1520548099.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:19.990Z,1520548099.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:20.371Z,1520548100.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:20.387Z,1520548100.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:20.774Z,1520548100.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:20.791Z,1520548100.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:21.174Z,1520548101.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:21.189Z,1520548101.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:21.586Z,1520548101.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:21.617Z,1520548101.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:21.973Z,1520548101.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:21.989Z,1520548101.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:22.360Z,1520548102.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:22.388Z,1520548102.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:22.768Z,1520548102.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:22.783Z,1520548102.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:23.169Z,1520548103.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:23.185Z,1520548103.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:23.573Z,1520548103.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:23.588Z,1520548103.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:23.977Z,1520548103.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:23.992Z,1520548103.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:24.378Z,1520548104.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:24.393Z,1520548104.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:24.778Z,1520548104.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:24.793Z,1520548104.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:25.174Z,1520548105.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:25.190Z,1520548105.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:25.571Z,1520548105.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:25.588Z,1520548105.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:25.967Z,1520548105.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:25.983Z,1520548105.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:26.371Z,1520548106.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:26.391Z,1520548106.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:26.777Z,1520548106.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:26.792Z,1520548106.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:27.177Z,1520548107.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:27.192Z,1520548107.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:27.576Z,1520548107.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:27.591Z,1520548107.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:27.971Z,1520548107.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:27.987Z,1520548107.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:28.363Z,1520548108.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:28.384Z,1520548108.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:28.763Z,1520548108.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:28.790Z,1520548108.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:29.173Z,1520548109.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:29.188Z,1520548109.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:29.576Z,1520548109.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:29.595Z,1520548109.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:29.980Z,1520548109.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:29.996Z,1520548109.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:30.381Z,1520548110.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:30.396Z,1520548110.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:30.777Z,1520548110.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:30.792Z,1520548110.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:31.175Z,1520548111.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:31.190Z,1520548111.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:31.571Z,1520548111.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:31.587Z,1520548111.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:31.972Z,1520548111.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:32.030Z,1520548112.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:32.367Z,1520548112.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:32.386Z,1520548112.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:32.781Z,1520548112.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:32.796Z,1520548112.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:33.174Z,1520548113.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:33.197Z,1520548113.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:33.577Z,1520548113.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:33.593Z,1520548113.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:33.955Z,1520548113.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:33.990Z,1520548113.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:34.371Z,1520548114.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:34.386Z,1520548114.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:34.774Z,1520548114.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:34.795Z,1520548114.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:35.159Z,1520548115.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:35.188Z,1520548115.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:35.556Z,1520548115.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:35.591Z,1520548115.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:35.982Z,1520548115.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:35.997Z,1520548115.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:36.382Z,1520548116.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:36.397Z,1520548116.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:36.773Z,1520548116.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:36.801Z,1520548116.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:37.163Z,1520548117.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:37.190Z,1520548117.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:37.561Z,1520548117.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:37.588Z,1520548117.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:37.964Z,1520548117.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:37.990Z,1520548117.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:38.358Z,1520548118.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:38.384Z,1520548118.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:38.780Z,1520548118.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:38.813Z,1520548118.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:39.190Z,1520548119.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:39.211Z,1520548119.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:39.581Z,1520548119.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:39.597Z,1520548119.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:39.959Z,1520548119.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:39.995Z,1520548119.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:40.356Z,1520548120.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:40.371Z,1520548120.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:40.762Z,1520548120.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:40.802Z,1520548120.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:41.167Z,1520548121.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:41.182Z,1520548121.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:41.562Z,1520548121.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:41.578Z,1520548121.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:41.978Z,1520548121.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:42.003Z,1520548122.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:42.377Z,1520548122.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:42.402Z,1520548122.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:42.773Z,1520548122.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:42.805Z,1520548122.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:43.166Z,1520548123.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:43.209Z,1520548123.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:43.568Z,1520548123.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:43.583Z,1520548123.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:43.966Z,1520548123.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:43.981Z,1520548123.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:44.370Z,1520548124.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:44.391Z,1520548124.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:44.781Z,1520548124.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:44.819Z,1520548124.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:45.168Z,1520548125.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:45.183Z,1520548125.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:45.581Z,1520548125.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:45.613Z,1520548125.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:46.026Z,1520548126.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:46.152Z,1520548126.152 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:46.152Z,1520548126.152 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 294
2018-03-08T22:28:46.152Z,1520548126.152 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T22:28:46.170Z,1520548126.170 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:46.170Z,1520548126.170 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 294
2018-03-08T22:28:46.170Z,1520548126.170 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T22:28:46.171Z,1520548126.171 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:46.172Z,1520548126.172 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 294
2018-03-08T22:28:46.172Z,1520548126.172 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T22:28:46.185Z,1520548126.185 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T22:28:46.186Z,1520548126.186 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T22:28:46.186Z,1520548126.186 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T22:28:46.361Z,1520548126.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:46.403Z,1520548126.403 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T22:28:46.403Z,1520548126.403 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 294
2018-03-08T22:28:46.404Z,1520548126.404 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T22:28:46.404Z,1520548126.404 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 294
2018-03-08T22:28:46.409Z,1520548126.409 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T22:28:46.409Z,1520548126.409 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 294
2018-03-08T22:28:46.763Z,1520548126.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:46.786Z,1520548126.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T22:28:46.786Z,1520548126.786 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:28:46.786Z,1520548126.786 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:28:46.787Z,1520548126.787 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T22:28:46.787Z,1520548126.787 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:28:46.787Z,1520548126.787 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:28:46.788Z,1520548126.788 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T22:28:46.788Z,1520548126.788 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:28:46.789Z,1520548126.789 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:28:47.171Z,1520548127.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:47.190Z,1520548127.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2018-03-08T22:28:47.191Z,1520548127.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:47.571Z,1520548127.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:47.594Z,1520548127.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.4 s old, using for 20.0 s.
2018-03-08T22:28:47.595Z,1520548127.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:47.981Z,1520548127.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:47.998Z,1520548127.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2018-03-08T22:28:47.999Z,1520548127.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:48.384Z,1520548128.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:48.399Z,1520548128.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2018-03-08T22:28:48.400Z,1520548128.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:51.757Z,1520548131.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:51.781Z,1520548131.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T22:28:51.782Z,1520548131.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:51.878Z,1520548131.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:51.910Z,1520548131.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2018-03-08T22:28:51.911Z,1520548131.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:52.236Z,1520548132.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:52.251Z,1520548132.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-03-08T22:28:52.252Z,1520548132.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:52.627Z,1520548132.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:52.662Z,1520548132.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-03-08T22:28:52.663Z,1520548132.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:53.032Z,1520548133.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:53.058Z,1520548133.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-03-08T22:28:53.059Z,1520548133.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:53.427Z,1520548133.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:53.459Z,1520548133.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-03-08T22:28:53.460Z,1520548133.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:53.852Z,1520548133.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:53.867Z,1520548133.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-03-08T22:28:53.868Z,1520548133.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:54.249Z,1520548134.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:54.265Z,1520548134.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-08T22:28:54.266Z,1520548134.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:54.654Z,1520548134.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:54.668Z,1520548134.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-03-08T22:28:54.670Z,1520548134.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:55.031Z,1520548135.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:55.062Z,1520548135.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-03-08T22:28:55.063Z,1520548135.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:55.427Z,1520548135.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:55.462Z,1520548135.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-03-08T22:28:55.463Z,1520548135.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:55.827Z,1520548135.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:55.862Z,1520548135.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-03-08T22:28:55.863Z,1520548135.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:56.227Z,1520548136.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:56.265Z,1520548136.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-03-08T22:28:56.266Z,1520548136.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:56.631Z,1520548136.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:56.670Z,1520548136.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-03-08T22:28:56.671Z,1520548136.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:57.050Z,1520548137.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:57.065Z,1520548137.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-03-08T22:28:57.066Z,1520548137.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:57.450Z,1520548137.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:57.470Z,1520548137.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-03-08T22:28:57.471Z,1520548137.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:57.837Z,1520548137.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:57.863Z,1520548137.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-03-08T22:28:57.864Z,1520548137.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:58.237Z,1520548138.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:58.252Z,1520548138.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-03-08T22:28:58.253Z,1520548138.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:58.634Z,1520548138.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:58.650Z,1520548138.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-03-08T22:28:58.651Z,1520548138.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:59.034Z,1520548139.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:59.049Z,1520548139.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-03-08T22:28:59.050Z,1520548139.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:59.436Z,1520548139.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:59.451Z,1520548139.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-03-08T22:28:59.452Z,1520548139.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:28:59.845Z,1520548139.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:28:59.860Z,1520548139.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-03-08T22:28:59.873Z,1520548139.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:00.245Z,1520548140.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:00.260Z,1520548140.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-03-08T22:29:00.273Z,1520548140.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:00.637Z,1520548140.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:00.652Z,1520548140.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-03-08T22:29:00.653Z,1520548140.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:01.035Z,1520548141.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:01.050Z,1520548141.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-03-08T22:29:01.051Z,1520548141.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:01.436Z,1520548141.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:01.451Z,1520548141.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-03-08T22:29:01.452Z,1520548141.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:01.835Z,1520548141.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:01.850Z,1520548141.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-03-08T22:29:01.851Z,1520548141.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:02.236Z,1520548142.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:02.251Z,1520548142.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-03-08T22:29:02.252Z,1520548142.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:02.635Z,1520548142.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:02.650Z,1520548142.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-03-08T22:29:02.651Z,1520548142.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:03.037Z,1520548143.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:03.052Z,1520548143.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-03-08T22:29:03.053Z,1520548143.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:03.440Z,1520548143.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:03.459Z,1520548143.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-08T22:29:03.460Z,1520548143.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:03.849Z,1520548143.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:03.883Z,1520548143.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-08T22:29:03.883Z,1520548143.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:04.234Z,1520548144.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:04.252Z,1520548144.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-08T22:29:04.253Z,1520548144.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:04.635Z,1520548144.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:04.649Z,1520548144.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-08T22:29:04.650Z,1520548144.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:05.034Z,1520548145.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:05.052Z,1520548145.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-08T22:29:05.053Z,1520548145.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:05.434Z,1520548145.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:05.448Z,1520548145.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-08T22:29:05.449Z,1520548145.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:05.849Z,1520548145.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:05.864Z,1520548145.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-08T22:29:05.888Z,1520548145.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:06.249Z,1520548146.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:06.280Z,1520548146.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:06.640Z,1520548146.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:06.655Z,1520548146.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:07.036Z,1520548147.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:07.051Z,1520548147.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:07.438Z,1520548147.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:07.453Z,1520548147.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:07.835Z,1520548147.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:07.850Z,1520548147.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:08.236Z,1520548148.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:08.252Z,1520548148.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:08.638Z,1520548148.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:08.653Z,1520548148.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:09.041Z,1520548149.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:09.057Z,1520548149.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:09.441Z,1520548149.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:09.462Z,1520548149.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:09.841Z,1520548149.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:09.857Z,1520548149.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:10.238Z,1520548150.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:10.253Z,1520548150.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:10.635Z,1520548150.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:10.650Z,1520548150.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:11.034Z,1520548151.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:11.054Z,1520548151.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:11.435Z,1520548151.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:11.450Z,1520548151.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:11.841Z,1520548151.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:11.856Z,1520548151.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:12.245Z,1520548152.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:12.260Z,1520548152.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:12.644Z,1520548152.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:12.666Z,1520548152.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:13.039Z,1520548153.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:13.055Z,1520548153.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:13.439Z,1520548153.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:13.458Z,1520548153.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:13.839Z,1520548153.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:13.855Z,1520548153.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:14.236Z,1520548154.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:14.251Z,1520548154.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:14.635Z,1520548154.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:14.650Z,1520548154.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:15.044Z,1520548155.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:15.059Z,1520548155.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:15.444Z,1520548155.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:15.459Z,1520548155.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:15.845Z,1520548155.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:15.861Z,1520548155.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:16.238Z,1520548156.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:16.254Z,1520548156.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:16.640Z,1520548156.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:16.655Z,1520548156.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:17.037Z,1520548157.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:17.052Z,1520548157.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:17.435Z,1520548157.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:17.450Z,1520548157.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:17.845Z,1520548157.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:17.866Z,1520548157.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:18.244Z,1520548158.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:18.266Z,1520548158.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:18.644Z,1520548158.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:18.659Z,1520548158.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:19.036Z,1520548159.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:19.050Z,1520548159.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:19.439Z,1520548159.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:19.458Z,1520548159.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:19.839Z,1520548159.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:19.854Z,1520548159.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:20.240Z,1520548160.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:20.255Z,1520548160.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:20.635Z,1520548160.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:20.654Z,1520548160.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:21.044Z,1520548161.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:21.067Z,1520548161.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:21.445Z,1520548161.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:21.460Z,1520548161.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:21.844Z,1520548161.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:21.859Z,1520548161.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:22.235Z,1520548162.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:22.250Z,1520548162.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:22.637Z,1520548162.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:22.658Z,1520548162.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:23.040Z,1520548163.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:23.055Z,1520548163.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:23.435Z,1520548163.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:23.451Z,1520548163.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:23.846Z,1520548163.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:23.861Z,1520548163.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:24.245Z,1520548164.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:24.260Z,1520548164.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:24.646Z,1520548164.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:24.661Z,1520548164.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:25.037Z,1520548165.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:25.052Z,1520548165.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:25.435Z,1520548165.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:25.451Z,1520548165.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:25.834Z,1520548165.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:25.854Z,1520548165.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:26.242Z,1520548166.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:26.257Z,1520548166.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:26.658Z,1520548166.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:26.685Z,1520548166.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:27.045Z,1520548167.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:27.068Z,1520548167.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:27.454Z,1520548167.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:27.469Z,1520548167.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:27.841Z,1520548167.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:27.865Z,1520548167.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:28.231Z,1520548168.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:28.258Z,1520548168.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:28.627Z,1520548168.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:28.665Z,1520548168.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:29.027Z,1520548169.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:29.067Z,1520548169.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:29.430Z,1520548169.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:29.459Z,1520548169.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:29.852Z,1520548169.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:29.867Z,1520548169.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:30.254Z,1520548170.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:30.275Z,1520548170.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:30.650Z,1520548170.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:30.670Z,1520548170.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:31.027Z,1520548171.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:31.062Z,1520548171.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:31.424Z,1520548171.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:31.439Z,1520548171.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:31.827Z,1520548171.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:31.842Z,1520548171.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:32.236Z,1520548172.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:32.275Z,1520548172.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:32.627Z,1520548172.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:32.643Z,1520548172.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:33.045Z,1520548173.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:33.070Z,1520548173.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:33.445Z,1520548173.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:33.470Z,1520548173.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:33.838Z,1520548173.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:33.872Z,1520548173.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:34.232Z,1520548174.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:34.248Z,1520548174.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:34.634Z,1520548174.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:34.649Z,1520548174.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:35.035Z,1520548175.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:35.051Z,1520548175.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:35.434Z,1520548175.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:35.449Z,1520548175.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:35.844Z,1520548175.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:35.859Z,1520548175.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:36.236Z,1520548176.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:36.251Z,1520548176.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:36.649Z,1520548176.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:36.664Z,1520548176.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:37.040Z,1520548177.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:37.055Z,1520548177.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:37.427Z,1520548177.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:37.450Z,1520548177.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:37.839Z,1520548177.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:37.858Z,1520548177.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:38.236Z,1520548178.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:38.251Z,1520548178.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:38.639Z,1520548178.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:38.654Z,1520548178.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:39.045Z,1520548179.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:39.060Z,1520548179.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:39.444Z,1520548179.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:39.459Z,1520548179.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:39.842Z,1520548179.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:39.869Z,1520548179.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:40.239Z,1520548180.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:40.258Z,1520548180.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:40.636Z,1520548180.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:40.651Z,1520548180.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:41.038Z,1520548181.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:41.096Z,1520548181.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:41.441Z,1520548181.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:41.493Z,1520548181.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:41.851Z,1520548181.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:41.866Z,1520548181.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:42.269Z,1520548182.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:42.324Z,1520548182.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:42.647Z,1520548182.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:42.662Z,1520548182.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:43.060Z,1520548183.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:43.085Z,1520548183.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:43.457Z,1520548183.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:43.505Z,1520548183.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:43.837Z,1520548183.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:43.867Z,1520548183.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:44.259Z,1520548184.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:44.283Z,1520548184.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:44.628Z,1520548184.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:44.668Z,1520548184.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:45.039Z,1520548185.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:45.073Z,1520548185.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:45.443Z,1520548185.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:45.494Z,1520548185.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:45.838Z,1520548185.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:45.854Z,1520548185.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:46.236Z,1520548186.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:46.251Z,1520548186.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:46.636Z,1520548186.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:46.654Z,1520548186.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:47.024Z,1520548187.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:47.059Z,1520548187.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:47.438Z,1520548187.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:47.458Z,1520548187.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:47.848Z,1520548187.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:47.864Z,1520548187.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:48.245Z,1520548188.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:48.260Z,1520548188.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:48.650Z,1520548188.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:48.667Z,1520548188.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:51.760Z,1520548191.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:51.775Z,1520548191.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:51.873Z,1520548191.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:51.915Z,1520548191.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:52.265Z,1520548192.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:52.297Z,1520548192.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:52.674Z,1520548192.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:52.706Z,1520548192.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:53.061Z,1520548193.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:53.089Z,1520548193.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:53.451Z,1520548193.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:53.475Z,1520548193.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:53.856Z,1520548193.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:53.871Z,1520548193.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:54.255Z,1520548194.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:54.271Z,1520548194.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:54.657Z,1520548194.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:54.674Z,1520548194.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:55.069Z,1520548195.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:55.101Z,1520548195.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:55.456Z,1520548195.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:55.472Z,1520548195.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:55.854Z,1520548195.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:55.869Z,1520548195.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:56.251Z,1520548196.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:56.275Z,1520548196.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:56.669Z,1520548196.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:56.700Z,1520548196.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:57.061Z,1520548197.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:57.098Z,1520548197.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:57.462Z,1520548197.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:57.477Z,1520548197.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:57.858Z,1520548197.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:57.879Z,1520548197.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:58.259Z,1520548198.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:58.274Z,1520548198.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:58.660Z,1520548198.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:58.676Z,1520548198.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:59.060Z,1520548199.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:59.075Z,1520548199.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:59.461Z,1520548199.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:59.478Z,1520548199.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:29:59.859Z,1520548199.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:29:59.874Z,1520548199.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:00.258Z,1520548200.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:00.274Z,1520548200.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:00.660Z,1520548200.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:00.682Z,1520548200.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:01.061Z,1520548201.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:01.076Z,1520548201.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:01.460Z,1520548201.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:01.482Z,1520548201.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:01.862Z,1520548201.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:01.891Z,1520548201.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:02.245Z,1520548202.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:02.274Z,1520548202.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:02.670Z,1520548202.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:02.685Z,1520548202.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:03.077Z,1520548203.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:03.108Z,1520548203.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:03.470Z,1520548203.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:03.484Z,1520548203.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:03.857Z,1520548203.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:03.939Z,1520548203.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:04.260Z,1520548204.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:04.275Z,1520548204.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:04.669Z,1520548204.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:04.685Z,1520548204.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:05.069Z,1520548205.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:05.085Z,1520548205.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:05.469Z,1520548205.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:05.490Z,1520548205.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:05.860Z,1520548205.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:05.875Z,1520548205.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:06.261Z,1520548206.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:06.279Z,1520548206.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:06.671Z,1520548206.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:06.686Z,1520548206.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:07.064Z,1520548207.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:07.091Z,1520548207.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:07.457Z,1520548207.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:07.493Z,1520548207.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:07.861Z,1520548207.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:07.877Z,1520548207.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:08.247Z,1520548208.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:08.284Z,1520548208.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:08.671Z,1520548208.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:08.687Z,1520548208.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:09.086Z,1520548209.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:09.122Z,1520548209.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:09.471Z,1520548209.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:09.486Z,1520548209.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:09.860Z,1520548209.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:09.876Z,1520548209.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:10.246Z,1520548210.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:10.283Z,1520548210.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:10.670Z,1520548210.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:10.685Z,1520548210.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:11.065Z,1520548211.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:11.087Z,1520548211.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:11.466Z,1520548211.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:11.481Z,1520548211.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:11.847Z,1520548211.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:11.884Z,1520548211.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:12.244Z,1520548212.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:12.278Z,1520548212.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:12.665Z,1520548212.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:12.681Z,1520548212.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:13.066Z,1520548213.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:13.081Z,1520548213.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:13.464Z,1520548213.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:13.486Z,1520548213.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:13.852Z,1520548213.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:13.886Z,1520548213.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:14.247Z,1520548214.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:14.275Z,1520548214.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:14.661Z,1520548214.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:14.682Z,1520548214.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:15.066Z,1520548215.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:15.094Z,1520548215.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:15.470Z,1520548215.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:15.485Z,1520548215.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:15.852Z,1520548215.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:15.880Z,1520548215.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:16.247Z,1520548216.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:16.279Z,1520548216.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:16.668Z,1520548216.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:16.691Z,1520548216.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:17.065Z,1520548217.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:17.084Z,1520548217.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:17.465Z,1520548217.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:17.481Z,1520548217.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:17.843Z,1520548217.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:17.881Z,1520548217.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:18.250Z,1520548218.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:18.277Z,1520548218.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:18.674Z,1520548218.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:18.689Z,1520548218.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:19.070Z,1520548219.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:19.084Z,1520548219.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:19.453Z,1520548219.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:19.486Z,1520548219.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:19.847Z,1520548219.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:19.878Z,1520548219.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:20.246Z,1520548220.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:20.284Z,1520548220.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:20.671Z,1520548220.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:20.690Z,1520548220.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:21.069Z,1520548221.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:21.084Z,1520548221.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:21.467Z,1520548221.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:21.493Z,1520548221.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:21.847Z,1520548221.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:21.879Z,1520548221.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:22.246Z,1520548222.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:22.282Z,1520548222.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:22.670Z,1520548222.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:22.686Z,1520548222.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:23.065Z,1520548223.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:23.095Z,1520548223.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:23.470Z,1520548223.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:23.485Z,1520548223.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:23.847Z,1520548223.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:23.882Z,1520548223.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:24.251Z,1520548224.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:24.287Z,1520548224.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:24.661Z,1520548224.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:24.688Z,1520548224.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:25.061Z,1520548225.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:25.090Z,1520548225.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:25.458Z,1520548225.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:25.495Z,1520548225.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:25.855Z,1520548225.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:25.891Z,1520548225.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:26.252Z,1520548226.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:26.267Z,1520548226.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:26.661Z,1520548226.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:26.692Z,1520548226.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:27.065Z,1520548227.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:27.096Z,1520548227.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:27.470Z,1520548227.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:27.502Z,1520548227.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:27.852Z,1520548227.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:27.867Z,1520548227.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:28.256Z,1520548228.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:28.271Z,1520548228.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:28.669Z,1520548228.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:28.700Z,1520548228.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:29.057Z,1520548229.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:29.072Z,1520548229.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:29.469Z,1520548229.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:29.499Z,1520548229.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:29.855Z,1520548229.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:29.870Z,1520548229.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:30.252Z,1520548230.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:30.267Z,1520548230.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:30.661Z,1520548230.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:30.676Z,1520548230.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:31.061Z,1520548231.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:31.077Z,1520548231.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:31.457Z,1520548231.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:31.473Z,1520548231.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:31.860Z,1520548231.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:31.875Z,1520548231.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:32.261Z,1520548232.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:32.276Z,1520548232.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:32.661Z,1520548232.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:32.677Z,1520548232.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:33.065Z,1520548233.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:33.080Z,1520548233.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:33.465Z,1520548233.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:33.481Z,1520548233.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:33.855Z,1520548233.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:33.871Z,1520548233.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:34.251Z,1520548234.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:34.278Z,1520548234.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:34.669Z,1520548234.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:34.685Z,1520548234.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:35.065Z,1520548235.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:35.081Z,1520548235.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:35.468Z,1520548235.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:35.483Z,1520548235.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:35.860Z,1520548235.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:35.876Z,1520548235.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:36.259Z,1520548236.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:36.274Z,1520548236.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:36.665Z,1520548236.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:36.680Z,1520548236.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:37.069Z,1520548237.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:37.084Z,1520548237.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:37.465Z,1520548237.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:37.480Z,1520548237.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:37.853Z,1520548237.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:37.874Z,1520548237.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:38.259Z,1520548238.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:38.275Z,1520548238.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:38.661Z,1520548238.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:38.677Z,1520548238.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:39.069Z,1520548239.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:39.084Z,1520548239.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:39.469Z,1520548239.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:39.491Z,1520548239.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:39.860Z,1520548239.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:39.875Z,1520548239.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:40.254Z,1520548240.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:40.274Z,1520548240.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:40.670Z,1520548240.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:40.685Z,1520548240.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:41.065Z,1520548241.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:41.081Z,1520548241.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:41.469Z,1520548241.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:41.491Z,1520548241.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:41.862Z,1520548241.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:41.877Z,1520548241.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:42.247Z,1520548242.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:42.279Z,1520548242.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:42.673Z,1520548242.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:42.689Z,1520548242.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:43.071Z,1520548243.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:43.086Z,1520548243.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:43.461Z,1520548243.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:43.485Z,1520548243.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:43.848Z,1520548243.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:43.889Z,1520548243.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:44.247Z,1520548244.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:44.279Z,1520548244.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:44.669Z,1520548244.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:44.689Z,1520548244.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:45.070Z,1520548245.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:45.093Z,1520548245.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:45.471Z,1520548245.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:45.491Z,1520548245.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:45.848Z,1520548245.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:45.880Z,1520548245.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:46.251Z,1520548246.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:46.289Z,1520548246.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:46.663Z,1520548246.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:46.699Z,1520548246.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:47.062Z,1520548247.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:47.087Z,1520548247.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:47.466Z,1520548247.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:47.491Z,1520548247.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:47.852Z,1520548247.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:47.868Z,1520548247.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:48.252Z,1520548248.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:48.267Z,1520548248.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:48.666Z,1520548248.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:48.698Z,1520548248.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:51.805Z,1520548251.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:51.820Z,1520548251.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:51.940Z,1520548251.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:51.958Z,1520548251.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:52.315Z,1520548252.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:52.358Z,1520548252.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:52.704Z,1520548252.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:52.732Z,1520548252.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:53.119Z,1520548253.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:53.134Z,1520548253.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:53.511Z,1520548253.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:53.555Z,1520548253.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:53.917Z,1520548253.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:53.938Z,1520548253.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:54.324Z,1520548254.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:54.341Z,1520548254.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:54.725Z,1520548254.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:54.762Z,1520548254.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:55.116Z,1520548255.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:55.148Z,1520548255.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:55.511Z,1520548255.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:55.529Z,1520548255.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:55.911Z,1520548255.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:55.931Z,1520548255.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:56.310Z,1520548256.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:56.327Z,1520548256.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:56.717Z,1520548256.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:56.764Z,1520548256.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:57.119Z,1520548257.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:57.139Z,1520548257.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:57.527Z,1520548257.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:57.542Z,1520548257.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:57.919Z,1520548257.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:57.938Z,1520548257.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:58.315Z,1520548258.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:58.349Z,1520548258.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:58.715Z,1520548258.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:58.736Z,1520548258.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:59.114Z,1520548259.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:59.134Z,1520548259.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:59.510Z,1520548259.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:59.535Z,1520548259.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:30:59.924Z,1520548259.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:30:59.965Z,1520548259.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:00.324Z,1520548260.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:00.344Z,1520548260.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:00.726Z,1520548260.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:00.746Z,1520548260.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:01.121Z,1520548261.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:01.136Z,1520548261.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:01.515Z,1520548261.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:01.551Z,1520548261.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:01.915Z,1520548261.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:01.938Z,1520548261.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:02.317Z,1520548262.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:02.336Z,1520548262.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:02.733Z,1520548262.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:02.748Z,1520548262.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:03.128Z,1520548263.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:03.170Z,1520548263.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:03.530Z,1520548263.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:03.548Z,1520548263.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:03.900Z,1520548263.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:03.946Z,1520548263.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:04.320Z,1520548264.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:04.366Z,1520548264.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:04.716Z,1520548264.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:04.748Z,1520548264.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:05.115Z,1520548265.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:05.140Z,1520548265.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:05.515Z,1520548265.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:05.535Z,1520548265.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:05.937Z,1520548265.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:05.952Z,1520548265.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:06.322Z,1520548266.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:06.367Z,1520548266.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:06.729Z,1520548266.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:06.748Z,1520548266.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:07.117Z,1520548267.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:07.136Z,1520548267.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:07.519Z,1520548267.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:07.538Z,1520548267.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:07.915Z,1520548267.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:07.951Z,1520548267.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:08.300Z,1520548268.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:08.333Z,1520548268.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:08.730Z,1520548268.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:08.751Z,1520548268.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:09.130Z,1520548269.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:09.145Z,1520548269.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:09.526Z,1520548269.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:09.571Z,1520548269.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:09.915Z,1520548269.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:09.936Z,1520548269.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:10.303Z,1520548270.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:10.341Z,1520548270.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:10.708Z,1520548270.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:10.737Z,1520548270.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:11.107Z,1520548271.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:11.151Z,1520548271.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:11.507Z,1520548271.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:11.538Z,1520548271.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:11.934Z,1520548271.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:11.949Z,1520548271.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:12.332Z,1520548272.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:12.347Z,1520548272.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:12.729Z,1520548272.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:12.768Z,1520548272.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:13.107Z,1520548273.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:13.147Z,1520548273.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:13.504Z,1520548273.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:13.554Z,1520548273.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:13.906Z,1520548273.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:13.937Z,1520548273.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:14.299Z,1520548274.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:14.334Z,1520548274.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:14.731Z,1520548274.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:14.748Z,1520548274.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:15.132Z,1520548275.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:15.155Z,1520548275.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:15.533Z,1520548275.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:15.548Z,1520548275.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:15.908Z,1520548275.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:15.954Z,1520548275.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:16.307Z,1520548276.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:16.338Z,1520548276.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:16.699Z,1520548276.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:16.736Z,1520548276.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:17.121Z,1520548277.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:17.136Z,1520548277.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:17.502Z,1520548277.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:17.549Z,1520548277.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:17.934Z,1520548277.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:17.950Z,1520548277.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:18.332Z,1520548278.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:18.347Z,1520548278.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:18.732Z,1520548278.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:18.747Z,1520548278.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:19.107Z,1520548279.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:19.148Z,1520548279.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:19.504Z,1520548279.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:19.538Z,1520548279.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:19.903Z,1520548279.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:19.942Z,1520548279.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:20.308Z,1520548280.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:20.339Z,1520548280.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:20.730Z,1520548280.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:20.778Z,1520548280.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:21.123Z,1520548281.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:21.175Z,1520548281.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:21.531Z,1520548281.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:21.547Z,1520548281.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:21.903Z,1520548281.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:21.934Z,1520548281.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:22.303Z,1520548282.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:22.334Z,1520548282.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:22.707Z,1520548282.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:22.741Z,1520548282.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:23.107Z,1520548283.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:23.146Z,1520548283.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:23.508Z,1520548283.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:23.542Z,1520548283.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:23.922Z,1520548283.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:23.950Z,1520548283.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:24.331Z,1520548284.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:24.348Z,1520548284.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:24.722Z,1520548284.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:24.745Z,1520548284.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:25.099Z,1520548285.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:25.137Z,1520548285.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:25.508Z,1520548285.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:25.554Z,1520548285.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:25.905Z,1520548285.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:25.938Z,1520548285.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:26.299Z,1520548286.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:26.341Z,1520548286.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:26.729Z,1520548286.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:26.745Z,1520548286.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:27.123Z,1520548287.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:27.162Z,1520548287.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:27.533Z,1520548287.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:27.559Z,1520548287.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:27.908Z,1520548287.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:27.939Z,1520548287.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:28.324Z,1520548288.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:28.340Z,1520548288.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:28.703Z,1520548288.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:28.740Z,1520548288.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:29.108Z,1520548289.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:29.141Z,1520548289.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:29.503Z,1520548289.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:29.543Z,1520548289.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:29.930Z,1520548289.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:29.945Z,1520548289.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:30.331Z,1520548290.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:30.366Z,1520548290.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:30.728Z,1520548290.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:30.766Z,1520548290.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:31.107Z,1520548291.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:31.142Z,1520548291.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:31.500Z,1520548291.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:31.546Z,1520548291.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:31.903Z,1520548291.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:31.945Z,1520548291.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:32.303Z,1520548292.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:32.348Z,1520548292.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:32.736Z,1520548292.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:32.752Z,1520548292.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:33.123Z,1520548293.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:33.150Z,1520548293.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:33.524Z,1520548293.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:33.554Z,1520548293.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:33.903Z,1520548293.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:33.946Z,1520548293.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:34.311Z,1520548294.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:34.347Z,1520548294.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:34.709Z,1520548294.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:34.746Z,1520548294.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:35.105Z,1520548295.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:35.154Z,1520548295.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:35.511Z,1520548295.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:35.549Z,1520548295.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:35.936Z,1520548295.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:35.955Z,1520548295.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:36.319Z,1520548296.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:36.343Z,1520548296.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:36.721Z,1520548296.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:36.762Z,1520548296.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:37.103Z,1520548297.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:37.147Z,1520548297.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:37.500Z,1520548297.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:37.542Z,1520548297.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:37.914Z,1520548297.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:37.946Z,1520548297.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:38.311Z,1520548298.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:38.357Z,1520548298.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:38.717Z,1520548298.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:38.752Z,1520548298.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:39.128Z,1520548299.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:39.154Z,1520548299.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:39.523Z,1520548299.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:39.553Z,1520548299.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:39.909Z,1520548299.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:39.953Z,1520548299.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:40.308Z,1520548300.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:40.330Z,1520548300.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:40.712Z,1520548300.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:40.732Z,1520548300.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:41.110Z,1520548301.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:41.128Z,1520548301.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:41.512Z,1520548301.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:41.554Z,1520548301.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:41.921Z,1520548301.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:41.949Z,1520548301.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:42.318Z,1520548302.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:42.337Z,1520548302.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:42.734Z,1520548302.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:42.766Z,1520548302.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:43.123Z,1520548303.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:43.170Z,1520548303.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:43.513Z,1520548303.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:43.544Z,1520548303.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:43.914Z,1520548303.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:43.946Z,1520548303.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:44.303Z,1520548304.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:44.342Z,1520548304.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:44.722Z,1520548304.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:44.786Z,1520548304.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:45.137Z,1520548305.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:45.175Z,1520548305.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:45.530Z,1520548305.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:45.550Z,1520548305.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:45.922Z,1520548305.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:45.952Z,1520548305.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:46.303Z,1520548306.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:46.349Z,1520548306.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:46.703Z,1520548306.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:46.737Z,1520548306.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:47.108Z,1520548307.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:47.139Z,1520548307.139 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:47.139Z,1520548307.139 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 295
2018-03-08T22:31:47.139Z,1520548307.139 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T22:31:47.141Z,1520548307.141 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:47.141Z,1520548307.141 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 295
2018-03-08T22:31:47.141Z,1520548307.141 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T22:31:47.143Z,1520548307.143 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:47.143Z,1520548307.143 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 295
2018-03-08T22:31:47.143Z,1520548307.143 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T22:31:47.155Z,1520548307.155 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T22:31:47.155Z,1520548307.155 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T22:31:47.155Z,1520548307.155 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T22:31:47.503Z,1520548307.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:47.554Z,1520548307.554 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T22:31:47.554Z,1520548307.554 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 295
2018-03-08T22:31:47.555Z,1520548307.555 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T22:31:47.555Z,1520548307.555 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 295
2018-03-08T22:31:47.555Z,1520548307.555 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T22:31:47.555Z,1520548307.555 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 295
2018-03-08T22:31:47.923Z,1520548307.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:47.954Z,1520548307.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T22:31:47.954Z,1520548307.954 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:31:47.955Z,1520548307.955 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:31:47.955Z,1520548307.955 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T22:31:47.956Z,1520548307.956 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:31:47.956Z,1520548307.956 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:31:47.956Z,1520548307.956 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T22:31:47.957Z,1520548307.957 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:31:47.957Z,1520548307.957 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:31:48.326Z,1520548308.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:48.362Z,1520548308.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T22:31:48.363Z,1520548308.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:48.731Z,1520548308.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:48.754Z,1520548308.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T22:31:48.755Z,1520548308.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:51.854Z,1520548311.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:51.891Z,1520548311.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T22:31:51.891Z,1520548311.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:51.967Z,1520548311.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:51.995Z,1520548311.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-03-08T22:31:51.996Z,1520548311.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:52.361Z,1520548312.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:52.388Z,1520548312.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T22:31:52.393Z,1520548312.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:52.761Z,1520548312.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:52.776Z,1520548312.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T22:31:52.800Z,1520548312.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:53.151Z,1520548313.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:53.167Z,1520548313.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T22:31:53.168Z,1520548313.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:53.549Z,1520548313.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:53.564Z,1520548313.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T22:31:53.565Z,1520548313.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:53.947Z,1520548313.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:53.962Z,1520548313.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T22:31:53.963Z,1520548313.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:54.342Z,1520548314.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:54.367Z,1520548314.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T22:31:54.368Z,1520548314.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:54.755Z,1520548314.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:54.774Z,1520548314.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T22:31:54.775Z,1520548314.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:55.157Z,1520548315.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:55.171Z,1520548315.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T22:31:55.172Z,1520548315.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:55.553Z,1520548315.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:55.568Z,1520548315.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T22:31:55.569Z,1520548315.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:55.950Z,1520548315.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:55.970Z,1520548315.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T22:31:55.971Z,1520548315.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:56.352Z,1520548316.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:56.366Z,1520548316.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T22:31:56.367Z,1520548316.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:56.751Z,1520548316.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:56.766Z,1520548316.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T22:31:56.767Z,1520548316.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:57.150Z,1520548317.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:57.170Z,1520548317.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T22:31:57.171Z,1520548317.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:57.555Z,1520548317.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:57.570Z,1520548317.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T22:31:57.571Z,1520548317.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:57.951Z,1520548317.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:57.974Z,1520548317.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T22:31:57.975Z,1520548317.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:58.357Z,1520548318.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:58.372Z,1520548318.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T22:31:58.373Z,1520548318.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:58.756Z,1520548318.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:58.771Z,1520548318.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T22:31:58.772Z,1520548318.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:59.140Z,1520548319.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:59.173Z,1520548319.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T22:31:59.174Z,1520548319.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:59.551Z,1520548319.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:59.565Z,1520548319.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T22:31:59.566Z,1520548319.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:31:59.953Z,1520548319.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:31:59.967Z,1520548319.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T22:31:59.968Z,1520548319.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:00.351Z,1520548320.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:00.366Z,1520548320.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T22:32:00.367Z,1520548320.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:00.760Z,1520548320.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:00.775Z,1520548320.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T22:32:00.776Z,1520548320.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:01.158Z,1520548321.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:01.173Z,1520548321.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T22:32:01.173Z,1520548321.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:01.557Z,1520548321.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:01.578Z,1520548321.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T22:32:01.579Z,1520548321.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:01.951Z,1520548321.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:01.970Z,1520548321.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T22:32:01.971Z,1520548321.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:02.360Z,1520548322.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:02.374Z,1520548322.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T22:32:02.375Z,1520548322.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:02.754Z,1520548322.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:02.774Z,1520548322.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T22:32:02.775Z,1520548322.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:03.149Z,1520548323.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:03.164Z,1520548323.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T22:32:03.165Z,1520548323.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:03.547Z,1520548323.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:03.562Z,1520548323.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T22:32:03.563Z,1520548323.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:03.954Z,1520548323.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:03.982Z,1520548323.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T22:32:03.983Z,1520548323.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:04.005Z,1520548324.005 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T22:32:04.365Z,1520548324.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:04.379Z,1520548324.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T22:32:04.381Z,1520548324.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:04.762Z,1520548324.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:04.776Z,1520548324.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T22:32:04.777Z,1520548324.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:05.136Z,1520548325.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:05.175Z,1520548325.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T22:32:05.176Z,1520548325.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:05.554Z,1520548325.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:05.569Z,1520548325.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T22:32:05.570Z,1520548325.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:05.955Z,1520548325.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:05.969Z,1520548325.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T22:32:05.970Z,1520548325.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:06.352Z,1520548326.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:06.368Z,1520548326.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T22:32:06.369Z,1520548326.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:06.761Z,1520548326.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:06.776Z,1520548326.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T22:32:06.777Z,1520548326.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:07.168Z,1520548327.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:07.183Z,1520548327.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:07.618Z,1520548327.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:07.707Z,1520548327.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:07.953Z,1520548327.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:07.968Z,1520548327.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:08.357Z,1520548328.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:08.372Z,1520548328.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:08.740Z,1520548328.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:08.769Z,1520548328.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:09.146Z,1520548329.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:09.171Z,1520548329.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:09.554Z,1520548329.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:09.569Z,1520548329.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:09.954Z,1520548329.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:09.982Z,1520548329.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:10.367Z,1520548330.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:10.442Z,1520548330.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:10.766Z,1520548330.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:10.781Z,1520548330.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:11.142Z,1520548331.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:11.183Z,1520548331.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:11.542Z,1520548331.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:11.577Z,1520548331.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:11.942Z,1520548331.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:11.977Z,1520548331.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:12.363Z,1520548332.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:12.379Z,1520548332.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:12.761Z,1520548332.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:12.780Z,1520548332.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:13.173Z,1520548333.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:13.191Z,1520548333.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:13.566Z,1520548333.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:13.586Z,1520548333.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:13.942Z,1520548333.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:13.975Z,1520548333.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:14.341Z,1520548334.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:14.382Z,1520548334.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:14.743Z,1520548334.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:14.775Z,1520548334.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:15.146Z,1520548335.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:15.182Z,1520548335.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:15.542Z,1520548335.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:15.557Z,1520548335.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:15.958Z,1520548335.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:15.986Z,1520548335.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:16.361Z,1520548336.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:16.387Z,1520548336.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:16.762Z,1520548336.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:16.788Z,1520548336.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:17.142Z,1520548337.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:17.158Z,1520548337.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:17.546Z,1520548337.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:17.561Z,1520548337.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:17.947Z,1520548337.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:17.962Z,1520548337.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:18.350Z,1520548338.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:18.365Z,1520548338.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:18.757Z,1520548338.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:18.788Z,1520548338.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:19.161Z,1520548339.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:19.176Z,1520548339.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:19.561Z,1520548339.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:19.592Z,1520548339.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:19.954Z,1520548339.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:19.969Z,1520548339.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:20.351Z,1520548340.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:20.366Z,1520548340.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:20.752Z,1520548340.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:20.768Z,1520548340.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:21.151Z,1520548341.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:21.167Z,1520548341.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:21.552Z,1520548341.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:21.567Z,1520548341.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:21.958Z,1520548341.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:21.973Z,1520548341.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:22.357Z,1520548342.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:22.372Z,1520548342.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:22.756Z,1520548342.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:22.772Z,1520548342.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:23.142Z,1520548343.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:23.167Z,1520548343.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:23.555Z,1520548343.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:23.570Z,1520548343.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:23.953Z,1520548343.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:23.968Z,1520548343.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:24.350Z,1520548344.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:24.370Z,1520548344.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:24.759Z,1520548344.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:24.782Z,1520548344.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:25.160Z,1520548345.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:25.175Z,1520548345.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:25.561Z,1520548345.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:25.576Z,1520548345.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:25.951Z,1520548345.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:25.966Z,1520548345.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:26.334Z,1520548346.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:26.372Z,1520548346.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:26.755Z,1520548346.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:26.770Z,1520548346.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:27.149Z,1520548347.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:27.168Z,1520548347.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:27.551Z,1520548347.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:27.567Z,1520548347.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:27.954Z,1520548347.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:27.978Z,1520548347.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:28.365Z,1520548348.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:28.380Z,1520548348.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:28.766Z,1520548348.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:28.781Z,1520548348.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:29.136Z,1520548349.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:29.170Z,1520548349.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:29.540Z,1520548349.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:29.580Z,1520548349.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:29.956Z,1520548349.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:29.971Z,1520548349.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:30.344Z,1520548350.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:30.371Z,1520548350.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:30.765Z,1520548350.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:30.780Z,1520548350.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:31.167Z,1520548351.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:31.209Z,1520548351.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:31.547Z,1520548351.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:31.573Z,1520548351.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:31.941Z,1520548351.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:31.967Z,1520548351.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:32.347Z,1520548352.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:32.376Z,1520548352.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:32.745Z,1520548352.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:32.772Z,1520548352.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:33.143Z,1520548353.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:33.169Z,1520548353.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:33.541Z,1520548353.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:33.568Z,1520548353.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:33.957Z,1520548353.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:33.976Z,1520548353.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:34.362Z,1520548354.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:34.377Z,1520548354.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:34.762Z,1520548354.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:34.777Z,1520548354.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:35.135Z,1520548355.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:35.160Z,1520548355.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:35.546Z,1520548355.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:35.573Z,1520548355.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:35.942Z,1520548355.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:35.975Z,1520548355.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:36.346Z,1520548356.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:36.372Z,1520548356.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:36.757Z,1520548356.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:36.780Z,1520548356.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:37.171Z,1520548357.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:37.187Z,1520548357.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:37.563Z,1520548357.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:37.579Z,1520548357.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:37.946Z,1520548357.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:37.973Z,1520548357.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:38.342Z,1520548358.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:38.373Z,1520548358.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:38.743Z,1520548358.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:38.779Z,1520548358.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:39.145Z,1520548359.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:39.178Z,1520548359.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:39.546Z,1520548359.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:39.581Z,1520548359.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:39.954Z,1520548359.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:39.991Z,1520548359.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:40.368Z,1520548360.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:40.387Z,1520548360.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:40.758Z,1520548360.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:40.795Z,1520548360.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:41.142Z,1520548361.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:41.179Z,1520548361.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:41.546Z,1520548361.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:41.578Z,1520548361.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:41.947Z,1520548361.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:41.980Z,1520548361.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:42.349Z,1520548362.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:42.384Z,1520548362.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:42.761Z,1520548362.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:42.783Z,1520548362.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:43.173Z,1520548363.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:43.202Z,1520548363.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:43.557Z,1520548363.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:43.581Z,1520548363.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:43.946Z,1520548363.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:43.987Z,1520548363.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:44.350Z,1520548364.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:44.381Z,1520548364.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:44.751Z,1520548364.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:44.788Z,1520548364.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:45.144Z,1520548365.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:45.159Z,1520548365.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:45.547Z,1520548365.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:45.562Z,1520548365.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:45.969Z,1520548365.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:45.992Z,1520548365.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:46.357Z,1520548366.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:46.381Z,1520548366.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:46.762Z,1520548366.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:46.794Z,1520548366.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:47.153Z,1520548367.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:47.169Z,1520548367.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:47.545Z,1520548367.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:47.569Z,1520548367.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:47.951Z,1520548367.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:47.967Z,1520548367.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:47.971Z,1520548367.971 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T22:27:47.6Z
2018-03-08T22:32:47.971Z,1520548367.971 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T22:32:47.971Z,1520548367.971 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T22:32:48.346Z,1520548368.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:48.365Z,1520548368.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:48.894Z,1520548368.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:48.914Z,1520548368.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:51.881Z,1520548371.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:51.904Z,1520548371.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:52.026Z,1520548372.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:52.051Z,1520548372.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:52.336Z,1520548372.336 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0344.lzma
2018-03-08T22:32:52.367Z,1520548372.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:52.382Z,1520548372.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:52.760Z,1520548372.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:52.775Z,1520548372.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:53.132Z,1520548373.132 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0344.lzma.bak
2018-03-08T22:32:53.132Z,1520548373.132 [DataOverHttps](INFO): SBD MOMSN=7989683
2018-03-08T22:32:53.172Z,1520548373.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:53.188Z,1520548373.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:53.752Z,1520548373.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:53.767Z,1520548373.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:53.965Z,1520548373.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:53.981Z,1520548373.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:57.081Z,1520548377.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:57.113Z,1520548377.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:57.212Z,1520548377.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:57.227Z,1520548377.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:57.571Z,1520548377.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:57.588Z,1520548377.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:57.971Z,1520548377.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:57.986Z,1520548377.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:58.379Z,1520548378.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:58.395Z,1520548378.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:58.785Z,1520548378.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:58.821Z,1520548378.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:32:59.181Z,1520548379.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:32:59.196Z,1520548379.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:02.277Z,1520548382.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:02.293Z,1520548382.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:02.398Z,1520548382.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:02.430Z,1520548382.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:02.766Z,1520548382.766 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180308T074127/Express0345.lzma
2018-03-08T22:33:02.799Z,1520548382.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:02.838Z,1520548382.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:03.173Z,1520548383.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:03.188Z,1520548383.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:03.540Z,1520548383.540 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0345.lzma.bak
2018-03-08T22:33:03.540Z,1520548383.540 [DataOverHttps](INFO): SBD MOMSN=7989685
2018-03-08T22:33:03.583Z,1520548383.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:03.598Z,1520548383.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:04.165Z,1520548384.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:04.180Z,1520548384.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:04.183Z,1520548384.183 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T22:33:04.183Z,1520548384.183 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T22:33:04.184Z,1520548384.184 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T22:33:04.380Z,1520548384.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:04.396Z,1520548384.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:07.489Z,1520548387.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:07.504Z,1520548387.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:07.597Z,1520548387.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:07.628Z,1520548387.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:07.989Z,1520548387.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:08.004Z,1520548388.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:08.387Z,1520548388.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:08.402Z,1520548388.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:08.801Z,1520548388.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:08.831Z,1520548388.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:09.201Z,1520548389.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:09.232Z,1520548389.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:09.600Z,1520548389.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:09.634Z,1520548389.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:09.988Z,1520548389.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:10.003Z,1520548390.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:10.385Z,1520548390.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:10.401Z,1520548390.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:10.786Z,1520548390.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:10.801Z,1520548390.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:11.184Z,1520548391.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:11.200Z,1520548391.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:11.588Z,1520548391.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:11.603Z,1520548391.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:11.989Z,1520548391.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:12.004Z,1520548392.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:12.397Z,1520548392.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:12.412Z,1520548392.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:12.789Z,1520548392.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:12.805Z,1520548392.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:13.187Z,1520548393.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:13.202Z,1520548393.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:13.586Z,1520548393.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:13.601Z,1520548393.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:13.986Z,1520548393.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:14.006Z,1520548394.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:14.387Z,1520548394.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:14.402Z,1520548394.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:14.801Z,1520548394.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:14.835Z,1520548394.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:15.202Z,1520548395.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:15.233Z,1520548395.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:15.593Z,1520548395.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:15.610Z,1520548395.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:15.988Z,1520548395.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:16.011Z,1520548396.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:16.390Z,1520548396.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:16.405Z,1520548396.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:16.790Z,1520548396.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:16.806Z,1520548396.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:17.191Z,1520548397.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:17.211Z,1520548397.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:17.590Z,1520548397.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:17.611Z,1520548397.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:17.993Z,1520548397.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:18.008Z,1520548398.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:18.397Z,1520548398.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:18.413Z,1520548398.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:18.794Z,1520548398.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:18.809Z,1520548398.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:19.187Z,1520548399.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:19.202Z,1520548399.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:19.587Z,1520548399.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:19.603Z,1520548399.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:19.990Z,1520548399.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:20.011Z,1520548400.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:20.390Z,1520548400.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:20.405Z,1520548400.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:20.794Z,1520548400.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:20.810Z,1520548400.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:21.193Z,1520548401.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:21.209Z,1520548401.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:21.594Z,1520548401.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:21.609Z,1520548401.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:21.990Z,1520548401.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:22.005Z,1520548402.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:22.387Z,1520548402.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:22.402Z,1520548402.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:22.788Z,1520548402.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:22.811Z,1520548402.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:23.191Z,1520548403.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:23.211Z,1520548403.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:23.598Z,1520548403.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:23.613Z,1520548403.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:24.001Z,1520548404.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:24.022Z,1520548404.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:24.393Z,1520548404.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:24.409Z,1520548404.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:24.797Z,1520548404.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:24.812Z,1520548404.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:25.188Z,1520548405.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:25.203Z,1520548405.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:25.591Z,1520548405.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:25.607Z,1520548405.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:25.998Z,1520548405.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:26.018Z,1520548406.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:26.392Z,1520548406.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:26.407Z,1520548406.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:26.801Z,1520548406.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:26.822Z,1520548406.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:27.205Z,1520548407.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:27.220Z,1520548407.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:27.602Z,1520548407.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:27.617Z,1520548407.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:27.992Z,1520548407.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:28.011Z,1520548408.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:28.392Z,1520548408.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:28.407Z,1520548408.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:28.788Z,1520548408.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:28.803Z,1520548408.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:29.189Z,1520548409.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:29.211Z,1520548409.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:29.588Z,1520548409.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:29.613Z,1520548409.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:30.005Z,1520548410.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:30.027Z,1520548410.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:30.405Z,1520548410.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:30.429Z,1520548410.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:30.791Z,1520548410.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:30.811Z,1520548410.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:31.188Z,1520548411.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:31.211Z,1520548411.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:31.588Z,1520548411.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:31.603Z,1520548411.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:31.987Z,1520548411.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:32.002Z,1520548412.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:32.388Z,1520548412.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:32.404Z,1520548412.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:32.796Z,1520548412.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:32.812Z,1520548412.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:33.197Z,1520548413.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:33.213Z,1520548413.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:33.598Z,1520548413.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:33.613Z,1520548413.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:33.987Z,1520548413.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:34.010Z,1520548414.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:34.391Z,1520548414.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:34.411Z,1520548414.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:34.789Z,1520548414.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:34.804Z,1520548414.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:35.185Z,1520548415.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:35.205Z,1520548415.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:35.581Z,1520548415.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:35.609Z,1520548415.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:36.002Z,1520548416.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:36.022Z,1520548416.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:36.394Z,1520548416.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:36.415Z,1520548416.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:36.798Z,1520548416.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:36.813Z,1520548416.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:37.194Z,1520548417.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:37.209Z,1520548417.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:37.591Z,1520548417.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:37.611Z,1520548417.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:37.992Z,1520548417.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:38.008Z,1520548418.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:38.387Z,1520548418.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:38.403Z,1520548418.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:38.801Z,1520548418.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:38.817Z,1520548418.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:39.224Z,1520548419.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:39.267Z,1520548419.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:39.601Z,1520548419.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:39.642Z,1520548419.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:39.989Z,1520548419.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:40.004Z,1520548420.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:40.386Z,1520548420.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:40.407Z,1520548420.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:40.787Z,1520548420.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:40.802Z,1520548420.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:41.185Z,1520548421.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:41.252Z,1520548421.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:41.585Z,1520548421.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:41.615Z,1520548421.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:42.005Z,1520548422.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:42.022Z,1520548422.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:42.403Z,1520548422.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:42.423Z,1520548422.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:42.789Z,1520548422.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:42.815Z,1520548422.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:43.187Z,1520548423.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:43.228Z,1520548423.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:43.587Z,1520548423.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:43.619Z,1520548423.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:43.979Z,1520548423.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:44.019Z,1520548424.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:44.416Z,1520548424.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:44.469Z,1520548424.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:44.795Z,1520548424.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:44.833Z,1520548424.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:45.197Z,1520548425.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:45.228Z,1520548425.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:45.601Z,1520548425.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:45.635Z,1520548425.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:45.982Z,1520548425.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:46.001Z,1520548426.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:46.388Z,1520548426.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:46.410Z,1520548426.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:46.788Z,1520548426.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:46.803Z,1520548426.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:47.180Z,1520548427.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:47.199Z,1520548427.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:47.588Z,1520548427.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:47.603Z,1520548427.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:48.001Z,1520548428.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:48.016Z,1520548428.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:48.401Z,1520548428.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:48.416Z,1520548428.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:48.794Z,1520548428.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:48.814Z,1520548428.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:49.196Z,1520548429.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:49.218Z,1520548429.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:49.587Z,1520548429.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:49.607Z,1520548429.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:49.987Z,1520548429.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:50.006Z,1520548430.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:50.391Z,1520548430.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:50.406Z,1520548430.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:50.796Z,1520548430.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:50.818Z,1520548430.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:51.197Z,1520548431.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:51.212Z,1520548431.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:51.597Z,1520548431.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:51.618Z,1520548431.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:51.981Z,1520548431.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:51.000Z,1520548432.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:52.387Z,1520548432.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:52.402Z,1520548432.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:52.787Z,1520548432.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:52.802Z,1520548432.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:53.180Z,1520548433.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:53.211Z,1520548433.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:53.591Z,1520548433.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:53.607Z,1520548433.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:53.996Z,1520548433.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:54.012Z,1520548434.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:54.397Z,1520548434.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:54.412Z,1520548434.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:54.796Z,1520548434.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:54.811Z,1520548434.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:55.195Z,1520548435.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:55.215Z,1520548435.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:55.591Z,1520548435.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:55.607Z,1520548435.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:55.987Z,1520548435.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:56.006Z,1520548436.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:56.392Z,1520548436.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:56.407Z,1520548436.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:56.797Z,1520548436.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:56.813Z,1520548436.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:57.196Z,1520548437.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:57.211Z,1520548437.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:57.597Z,1520548437.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:57.611Z,1520548437.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:57.980Z,1520548437.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:58.007Z,1520548438.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:58.392Z,1520548438.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:58.414Z,1520548438.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:58.791Z,1520548438.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:58.806Z,1520548438.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:59.180Z,1520548439.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:59.207Z,1520548439.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:33:59.590Z,1520548439.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:33:59.606Z,1520548439.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:00.000Z,1520548440.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:00.015Z,1520548440.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:00.402Z,1520548440.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:00.418Z,1520548440.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:00.800Z,1520548440.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:00.815Z,1520548440.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:01.192Z,1520548441.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:01.207Z,1520548441.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:01.591Z,1520548441.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:01.610Z,1520548441.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:01.987Z,1520548441.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:02.006Z,1520548442.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:02.388Z,1520548442.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:02.403Z,1520548442.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:02.801Z,1520548442.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:02.816Z,1520548442.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:03.201Z,1520548443.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:03.216Z,1520548443.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:03.601Z,1520548443.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:03.616Z,1520548443.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:03.976Z,1520548443.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:04.011Z,1520548444.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:04.389Z,1520548444.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:04.405Z,1520548444.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:04.796Z,1520548444.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:04.811Z,1520548444.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:08.183Z,1520548448.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:08.199Z,1520548448.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:08.303Z,1520548448.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:08.350Z,1520548448.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:08.669Z,1520548448.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:08.767Z,1520548448.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:09.052Z,1520548449.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:09.067Z,1520548449.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:09.469Z,1520548449.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:09.499Z,1520548449.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:09.891Z,1520548449.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:09.907Z,1520548449.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:10.253Z,1520548450.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:10.267Z,1520548450.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:10.665Z,1520548450.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:10.714Z,1520548450.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:11.066Z,1520548451.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:11.081Z,1520548451.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:11.465Z,1520548451.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:11.480Z,1520548451.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:11.853Z,1520548451.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:11.874Z,1520548451.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:12.250Z,1520548452.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:12.278Z,1520548452.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:12.668Z,1520548452.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:12.684Z,1520548452.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:13.068Z,1520548453.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:13.083Z,1520548453.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:13.468Z,1520548453.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:13.490Z,1520548453.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:13.856Z,1520548453.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:13.871Z,1520548453.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:14.259Z,1520548454.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:14.275Z,1520548454.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:14.665Z,1520548454.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:14.680Z,1520548454.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:15.069Z,1520548455.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:15.083Z,1520548455.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:15.469Z,1520548455.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:15.484Z,1520548455.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:15.855Z,1520548455.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:15.871Z,1520548455.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:16.243Z,1520548456.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:16.278Z,1520548456.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:16.668Z,1520548456.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:16.690Z,1520548456.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:17.072Z,1520548457.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:17.094Z,1520548457.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:17.472Z,1520548457.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:17.487Z,1520548457.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:17.859Z,1520548457.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:17.882Z,1520548457.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:18.247Z,1520548458.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:18.278Z,1520548458.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:18.665Z,1520548458.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:18.680Z,1520548458.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:19.073Z,1520548459.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:19.088Z,1520548459.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:19.469Z,1520548459.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:19.484Z,1520548459.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:19.848Z,1520548459.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:19.874Z,1520548459.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:20.259Z,1520548460.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:20.279Z,1520548460.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:20.666Z,1520548460.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:20.681Z,1520548460.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:21.066Z,1520548461.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:21.086Z,1520548461.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:21.465Z,1520548461.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:21.486Z,1520548461.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:21.859Z,1520548461.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:21.878Z,1520548461.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:22.247Z,1520548462.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:22.275Z,1520548462.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:22.672Z,1520548462.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:22.688Z,1520548462.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:23.072Z,1520548463.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:23.087Z,1520548463.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:23.463Z,1520548463.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:23.489Z,1520548463.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:23.859Z,1520548463.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:23.876Z,1520548463.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:24.247Z,1520548464.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:24.278Z,1520548464.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:24.666Z,1520548464.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:24.681Z,1520548464.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:25.072Z,1520548465.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:25.087Z,1520548465.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:25.472Z,1520548465.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:25.487Z,1520548465.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:25.847Z,1520548465.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:25.875Z,1520548465.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:26.247Z,1520548466.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:26.282Z,1520548466.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:26.661Z,1520548466.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:26.689Z,1520548466.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:27.073Z,1520548467.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:27.088Z,1520548467.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:27.470Z,1520548467.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:27.485Z,1520548467.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:27.847Z,1520548467.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:27.879Z,1520548467.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:28.247Z,1520548468.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:28.279Z,1520548468.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:28.675Z,1520548468.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:28.690Z,1520548468.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:29.069Z,1520548469.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:29.084Z,1520548469.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:29.470Z,1520548469.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:29.485Z,1520548469.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:29.848Z,1520548469.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:29.879Z,1520548469.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:30.247Z,1520548470.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:30.278Z,1520548470.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:30.674Z,1520548470.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:30.695Z,1520548470.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:31.069Z,1520548471.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:31.089Z,1520548471.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:31.474Z,1520548471.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:31.489Z,1520548471.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:31.848Z,1520548471.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:31.886Z,1520548471.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:32.251Z,1520548472.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:32.282Z,1520548472.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:32.657Z,1520548472.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:32.684Z,1520548472.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:33.057Z,1520548473.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:33.092Z,1520548473.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:33.475Z,1520548473.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:33.490Z,1520548473.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:33.847Z,1520548473.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:33.886Z,1520548473.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:34.247Z,1520548474.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:34.287Z,1520548474.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:34.674Z,1520548474.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:34.694Z,1520548474.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:35.071Z,1520548475.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:35.092Z,1520548475.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:35.474Z,1520548475.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:35.490Z,1520548475.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:35.851Z,1520548475.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:35.883Z,1520548475.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:36.248Z,1520548476.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:36.279Z,1520548476.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:36.674Z,1520548476.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:36.690Z,1520548476.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:37.074Z,1520548477.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:37.090Z,1520548477.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:37.457Z,1520548477.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:37.483Z,1520548477.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:37.847Z,1520548477.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:37.862Z,1520548477.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:38.251Z,1520548478.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:38.267Z,1520548478.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:38.665Z,1520548478.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:38.690Z,1520548478.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:39.069Z,1520548479.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:39.094Z,1520548479.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:39.469Z,1520548479.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:39.498Z,1520548479.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:39.854Z,1520548479.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:39.869Z,1520548479.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:40.255Z,1520548480.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:40.270Z,1520548480.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:40.657Z,1520548480.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:40.673Z,1520548480.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:41.069Z,1520548481.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:41.099Z,1520548481.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:41.465Z,1520548481.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:41.498Z,1520548481.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:41.853Z,1520548481.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:41.869Z,1520548481.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:42.252Z,1520548482.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:42.276Z,1520548482.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:42.670Z,1520548482.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:42.701Z,1520548482.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:43.053Z,1520548483.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:43.070Z,1520548483.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:43.461Z,1520548483.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:43.498Z,1520548483.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:43.858Z,1520548483.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:43.873Z,1520548483.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:44.258Z,1520548484.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:44.279Z,1520548484.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:44.661Z,1520548484.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:44.677Z,1520548484.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:45.060Z,1520548485.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:45.084Z,1520548485.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:45.461Z,1520548485.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:45.476Z,1520548485.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:45.860Z,1520548485.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:45.876Z,1520548485.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:46.255Z,1520548486.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:46.270Z,1520548486.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:46.661Z,1520548486.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:46.676Z,1520548486.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:47.073Z,1520548487.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:47.088Z,1520548487.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:47.464Z,1520548487.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:47.479Z,1520548487.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:47.861Z,1520548487.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:47.876Z,1520548487.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:48.255Z,1520548488.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:48.274Z,1520548488.274 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:48.275Z,1520548488.275 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 296
2018-03-08T22:34:48.275Z,1520548488.275 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T22:34:48.277Z,1520548488.277 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:48.277Z,1520548488.277 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 296
2018-03-08T22:34:48.277Z,1520548488.277 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T22:34:48.278Z,1520548488.278 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:48.279Z,1520548488.279 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 296
2018-03-08T22:34:48.279Z,1520548488.279 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T22:34:48.290Z,1520548488.290 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T22:34:48.291Z,1520548488.291 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T22:34:48.291Z,1520548488.291 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T22:34:48.669Z,1520548488.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:48.694Z,1520548488.694 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T22:34:48.694Z,1520548488.694 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 296
2018-03-08T22:34:48.695Z,1520548488.695 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T22:34:48.695Z,1520548488.695 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 296
2018-03-08T22:34:48.695Z,1520548488.695 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T22:34:48.696Z,1520548488.696 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 296
2018-03-08T22:34:49.065Z,1520548489.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:49.079Z,1520548489.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T22:34:49.080Z,1520548489.080 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:34:49.080Z,1520548489.080 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:34:49.081Z,1520548489.081 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T22:34:49.081Z,1520548489.081 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:34:49.082Z,1520548489.082 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:34:49.082Z,1520548489.082 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T22:34:49.082Z,1520548489.082 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:34:49.083Z,1520548489.083 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:34:49.476Z,1520548489.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:49.498Z,1520548489.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T22:34:49.499Z,1520548489.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:49.847Z,1520548489.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:49.886Z,1520548489.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T22:34:49.887Z,1520548489.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:50.251Z,1520548490.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:50.282Z,1520548490.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T22:34:50.283Z,1520548490.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:50.674Z,1520548490.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:50.689Z,1520548490.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T22:34:50.690Z,1520548490.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:51.070Z,1520548491.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:51.085Z,1520548491.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T22:34:51.086Z,1520548491.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:51.465Z,1520548491.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:51.480Z,1520548491.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T22:34:51.489Z,1520548491.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:51.856Z,1520548491.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:51.871Z,1520548491.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T22:34:51.872Z,1520548491.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:52.251Z,1520548492.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:52.266Z,1520548492.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T22:34:52.267Z,1520548492.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:52.626Z,1520548492.626 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T22:34:52.626Z,1520548492.626 [NAL9602] Data Fault, FailCount= 2
2018-03-08T22:34:52.626Z,1520548492.626 [NAL9602](ERROR): Data Fault
2018-03-08T22:34:52.650Z,1520548492.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:52.682Z,1520548492.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T22:34:52.683Z,1520548492.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:52.708Z,1520548492.708 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T22:34:53.034Z,1520548493.034 [NAL9602](INFO): Powering down
2018-03-08T22:34:53.064Z,1520548493.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:53.083Z,1520548493.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T22:34:53.084Z,1520548493.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:53.458Z,1520548493.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:53.473Z,1520548493.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T22:34:53.474Z,1520548493.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:53.851Z,1520548493.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:53.867Z,1520548493.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T22:34:53.868Z,1520548493.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:53.881Z,1520548493.881 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T22:34:53.881Z,1520548493.881 [NAL9602] No Fault, FailCount= 2
2018-03-08T22:34:54.262Z,1520548494.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:54.282Z,1520548494.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T22:34:54.283Z,1520548494.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:54.658Z,1520548494.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:54.673Z,1520548494.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T22:34:54.674Z,1520548494.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:55.040Z,1520548495.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:55.071Z,1520548495.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T22:34:55.072Z,1520548495.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:55.457Z,1520548495.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:55.472Z,1520548495.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T22:34:55.473Z,1520548495.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:55.842Z,1520548495.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:55.876Z,1520548495.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T22:34:55.877Z,1520548495.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:56.254Z,1520548496.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:56.270Z,1520548496.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T22:34:56.271Z,1520548496.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:56.649Z,1520548496.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:56.674Z,1520548496.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T22:34:56.675Z,1520548496.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:57.044Z,1520548497.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:57.069Z,1520548497.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T22:34:57.070Z,1520548497.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:57.455Z,1520548497.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:57.470Z,1520548497.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T22:34:57.471Z,1520548497.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:57.849Z,1520548497.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:57.881Z,1520548497.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T22:34:57.882Z,1520548497.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:58.242Z,1520548498.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:58.268Z,1520548498.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T22:34:58.269Z,1520548498.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:58.658Z,1520548498.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:58.673Z,1520548498.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T22:34:58.674Z,1520548498.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:59.049Z,1520548499.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:59.072Z,1520548499.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T22:34:59.073Z,1520548499.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:59.442Z,1520548499.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:59.477Z,1520548499.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T22:34:59.478Z,1520548499.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:34:59.842Z,1520548499.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:34:59.869Z,1520548499.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T22:34:59.870Z,1520548499.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:00.249Z,1520548500.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:00.276Z,1520548500.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T22:35:00.281Z,1520548500.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:00.658Z,1520548500.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:00.673Z,1520548500.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T22:35:00.674Z,1520548500.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:01.044Z,1520548501.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:01.070Z,1520548501.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T22:35:01.071Z,1520548501.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:01.446Z,1520548501.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:01.479Z,1520548501.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T22:35:01.480Z,1520548501.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:01.858Z,1520548501.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:01.873Z,1520548501.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T22:35:01.874Z,1520548501.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:02.259Z,1520548502.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:02.274Z,1520548502.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T22:35:02.275Z,1520548502.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:02.646Z,1520548502.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:02.678Z,1520548502.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T22:35:02.679Z,1520548502.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:03.042Z,1520548503.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:03.068Z,1520548503.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T22:35:03.069Z,1520548503.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:03.442Z,1520548503.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:03.468Z,1520548503.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T22:35:03.469Z,1520548503.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:03.846Z,1520548503.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:03.878Z,1520548503.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T22:35:03.879Z,1520548503.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:04.242Z,1520548504.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:04.275Z,1520548504.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T22:35:04.276Z,1520548504.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:04.658Z,1520548504.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:04.673Z,1520548504.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T22:35:04.674Z,1520548504.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:05.046Z,1520548505.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:05.078Z,1520548505.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T22:35:05.079Z,1520548505.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:08.156Z,1520548508.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:08.171Z,1520548508.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-03-08T22:35:08.172Z,1520548508.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:08.269Z,1520548508.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:08.308Z,1520548508.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:08.626Z,1520548508.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:08.646Z,1520548508.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:09.023Z,1520548509.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:09.038Z,1520548509.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:09.422Z,1520548509.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:09.437Z,1520548509.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:09.824Z,1520548509.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:09.855Z,1520548509.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:10.227Z,1520548510.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:10.242Z,1520548510.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:10.627Z,1520548510.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:10.643Z,1520548510.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:11.026Z,1520548511.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:11.041Z,1520548511.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:11.422Z,1520548511.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:11.443Z,1520548511.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:11.825Z,1520548511.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:11.841Z,1520548511.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:12.228Z,1520548512.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:12.243Z,1520548512.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:12.628Z,1520548512.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:12.643Z,1520548512.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:13.021Z,1520548513.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:13.036Z,1520548513.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:13.428Z,1520548513.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:13.443Z,1520548513.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:13.827Z,1520548513.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:13.843Z,1520548513.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:14.221Z,1520548514.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:14.236Z,1520548514.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:14.628Z,1520548514.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:14.643Z,1520548514.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:15.026Z,1520548515.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:15.041Z,1520548515.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:15.426Z,1520548515.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:15.441Z,1520548515.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:15.826Z,1520548515.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:15.841Z,1520548515.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:16.228Z,1520548516.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:16.243Z,1520548516.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:16.630Z,1520548516.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:16.645Z,1520548516.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:17.025Z,1520548517.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:17.047Z,1520548517.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:17.428Z,1520548517.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:17.443Z,1520548517.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:17.828Z,1520548517.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:17.843Z,1520548517.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:18.227Z,1520548518.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:18.242Z,1520548518.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:18.627Z,1520548518.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:18.643Z,1520548518.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:19.024Z,1520548519.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:19.040Z,1520548519.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:19.427Z,1520548519.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:19.443Z,1520548519.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:19.826Z,1520548519.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:19.841Z,1520548519.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:20.227Z,1520548520.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:20.242Z,1520548520.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:20.626Z,1520548520.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:20.641Z,1520548520.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:21.027Z,1520548521.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:21.042Z,1520548521.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:21.424Z,1520548521.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:21.440Z,1520548521.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:21.826Z,1520548521.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:21.840Z,1520548521.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:22.227Z,1520548522.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:22.242Z,1520548522.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:22.627Z,1520548522.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:22.642Z,1520548522.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:23.027Z,1520548523.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:23.042Z,1520548523.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:23.411Z,1520548523.411 [NAL9602](INFO): Powering up NAL9602
2018-03-08T22:35:23.428Z,1520548523.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:23.450Z,1520548523.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:23.825Z,1520548523.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:23.841Z,1520548523.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:24.227Z,1520548524.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:24.242Z,1520548524.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:24.627Z,1520548524.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:24.642Z,1520548524.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:25.023Z,1520548525.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:25.039Z,1520548525.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:25.427Z,1520548525.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:25.441Z,1520548525.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:25.827Z,1520548525.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:25.842Z,1520548525.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:26.228Z,1520548526.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:26.243Z,1520548526.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:26.626Z,1520548526.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:26.641Z,1520548526.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:27.022Z,1520548527.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:27.037Z,1520548527.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:27.423Z,1520548527.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:27.439Z,1520548527.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:27.826Z,1520548527.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:27.841Z,1520548527.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:28.225Z,1520548528.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:28.241Z,1520548528.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:28.624Z,1520548528.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:28.639Z,1520548528.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:29.027Z,1520548529.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:29.042Z,1520548529.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:29.427Z,1520548529.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:29.442Z,1520548529.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:29.827Z,1520548529.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:29.842Z,1520548529.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:30.227Z,1520548530.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:30.242Z,1520548530.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:30.627Z,1520548530.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:30.642Z,1520548530.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:31.024Z,1520548531.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:31.040Z,1520548531.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:31.427Z,1520548531.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:31.442Z,1520548531.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:31.826Z,1520548531.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:31.841Z,1520548531.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:32.227Z,1520548532.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:32.242Z,1520548532.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:32.627Z,1520548532.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:32.642Z,1520548532.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:33.027Z,1520548533.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:33.043Z,1520548533.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:33.420Z,1520548533.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:33.435Z,1520548533.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:33.827Z,1520548533.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:33.842Z,1520548533.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:34.241Z,1520548534.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:34.270Z,1520548534.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:34.611Z,1520548534.611 [NAL9602](INFO): NAL9602 initialized
2018-03-08T22:35:34.628Z,1520548534.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:34.643Z,1520548534.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:35.028Z,1520548535.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:35.043Z,1520548535.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:35.433Z,1520548535.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:35.448Z,1520548535.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:35.833Z,1520548535.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:35.848Z,1520548535.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:36.241Z,1520548536.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:36.272Z,1520548536.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:36.623Z,1520548536.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:36.650Z,1520548536.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:37.016Z,1520548537.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:37.051Z,1520548537.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:37.432Z,1520548537.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:37.447Z,1520548537.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:37.829Z,1520548537.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:37.844Z,1520548537.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:38.240Z,1520548538.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:38.256Z,1520548538.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:38.640Z,1520548538.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:38.655Z,1520548538.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:39.041Z,1520548539.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:39.062Z,1520548539.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:39.432Z,1520548539.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:39.447Z,1520548539.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:39.827Z,1520548539.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:39.847Z,1520548539.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:40.241Z,1520548540.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:40.256Z,1520548540.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:40.640Z,1520548540.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:40.655Z,1520548540.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:41.040Z,1520548541.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:41.056Z,1520548541.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:41.425Z,1520548541.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:41.446Z,1520548541.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:41.824Z,1520548541.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:41.878Z,1520548541.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:42.259Z,1520548542.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:42.274Z,1520548542.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:42.639Z,1520548542.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:42.677Z,1520548542.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:43.028Z,1520548543.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:43.071Z,1520548543.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:43.430Z,1520548543.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:43.474Z,1520548543.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:43.827Z,1520548543.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:43.843Z,1520548543.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:44.258Z,1520548544.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:44.282Z,1520548544.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:44.649Z,1520548544.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:44.678Z,1520548544.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:45.049Z,1520548545.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:45.075Z,1520548545.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:45.427Z,1520548545.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:45.476Z,1520548545.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:45.834Z,1520548545.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:45.871Z,1520548545.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:46.233Z,1520548546.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:46.249Z,1520548546.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:46.646Z,1520548546.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:46.675Z,1520548546.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:47.030Z,1520548547.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:47.045Z,1520548547.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:47.428Z,1520548547.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:47.452Z,1520548547.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:47.831Z,1520548547.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:47.846Z,1520548547.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:48.237Z,1520548548.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:48.252Z,1520548548.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:48.638Z,1520548548.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:48.653Z,1520548548.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:49.037Z,1520548549.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:49.052Z,1520548549.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:49.425Z,1520548549.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:49.448Z,1520548549.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:49.832Z,1520548549.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:49.848Z,1520548549.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:50.237Z,1520548550.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:50.253Z,1520548550.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:50.637Z,1520548550.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:50.653Z,1520548550.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:51.037Z,1520548551.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:51.054Z,1520548551.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:51.432Z,1520548551.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:51.448Z,1520548551.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:51.825Z,1520548551.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:51.845Z,1520548551.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:52.238Z,1520548552.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:52.259Z,1520548552.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:52.640Z,1520548552.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:52.656Z,1520548552.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:53.039Z,1520548553.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:53.054Z,1520548553.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:53.425Z,1520548553.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:53.449Z,1520548553.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:53.821Z,1520548553.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:53.854Z,1520548553.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:54.242Z,1520548554.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:54.263Z,1520548554.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:54.641Z,1520548554.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:54.656Z,1520548554.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:55.038Z,1520548555.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:55.053Z,1520548555.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:55.427Z,1520548555.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:55.448Z,1520548555.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:55.825Z,1520548555.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:55.848Z,1520548555.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:56.235Z,1520548556.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:56.257Z,1520548556.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:56.642Z,1520548556.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:56.662Z,1520548556.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:57.042Z,1520548557.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:57.062Z,1520548557.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:57.416Z,1520548557.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:57.443Z,1520548557.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:57.819Z,1520548557.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:57.859Z,1520548557.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:58.242Z,1520548558.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:58.259Z,1520548558.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:58.644Z,1520548558.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:58.659Z,1520548558.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:59.041Z,1520548559.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:59.062Z,1520548559.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:59.432Z,1520548559.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:59.447Z,1520548559.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:35:59.815Z,1520548559.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:35:59.841Z,1520548559.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:00.237Z,1520548560.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:00.253Z,1520548560.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:00.641Z,1520548560.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:00.656Z,1520548560.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:01.042Z,1520548561.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:01.058Z,1520548561.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:01.420Z,1520548561.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:01.446Z,1520548561.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:01.815Z,1520548561.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:01.847Z,1520548561.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:02.241Z,1520548562.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:02.257Z,1520548562.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:02.641Z,1520548562.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:02.657Z,1520548562.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:03.038Z,1520548563.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:03.058Z,1520548563.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:03.424Z,1520548563.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:03.450Z,1520548563.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:03.819Z,1520548563.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:03.846Z,1520548563.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:04.236Z,1520548564.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:04.260Z,1520548564.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:04.645Z,1520548564.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:04.660Z,1520548564.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:05.037Z,1520548565.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:05.052Z,1520548565.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:05.415Z,1520548565.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:05.451Z,1520548565.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:08.937Z,1520548568.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:08.953Z,1520548568.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:09.073Z,1520548569.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:09.115Z,1520548569.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:09.417Z,1520548569.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:09.448Z,1520548569.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:09.809Z,1520548569.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:09.830Z,1520548569.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:10.203Z,1520548570.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:10.219Z,1520548570.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:10.604Z,1520548570.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:10.627Z,1520548570.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:11.004Z,1520548571.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:11.019Z,1520548571.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:11.409Z,1520548571.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:11.430Z,1520548571.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:11.826Z,1520548571.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:11.841Z,1520548571.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:12.222Z,1520548572.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:12.237Z,1520548572.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:12.610Z,1520548572.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:12.631Z,1520548572.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:12.999Z,1520548572.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:13.031Z,1520548573.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:13.413Z,1520548573.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:13.427Z,1520548573.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:13.799Z,1520548573.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:13.825Z,1520548573.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:14.223Z,1520548574.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:14.246Z,1520548574.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:14.624Z,1520548574.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:14.651Z,1520548574.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:15.032Z,1520548575.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:15.051Z,1520548575.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:15.399Z,1520548575.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:15.431Z,1520548575.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:15.802Z,1520548575.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:15.842Z,1520548575.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:16.205Z,1520548576.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:16.234Z,1520548576.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:16.617Z,1520548576.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:16.643Z,1520548576.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:17.017Z,1520548577.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:17.041Z,1520548577.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:17.403Z,1520548577.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:17.419Z,1520548577.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:17.806Z,1520548577.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:17.821Z,1520548577.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:18.217Z,1520548578.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:18.251Z,1520548578.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:18.613Z,1520548578.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:18.628Z,1520548578.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:19.013Z,1520548579.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:19.028Z,1520548579.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:19.411Z,1520548579.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:19.426Z,1520548579.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:19.804Z,1520548579.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:19.819Z,1520548579.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:20.225Z,1520548580.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:20.257Z,1520548580.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:20.609Z,1520548580.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:20.624Z,1520548580.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:21.008Z,1520548581.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:21.031Z,1520548581.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:21.409Z,1520548581.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:21.424Z,1520548581.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:21.808Z,1520548581.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:21.823Z,1520548581.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:22.208Z,1520548582.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:22.224Z,1520548582.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:22.613Z,1520548582.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:22.628Z,1520548582.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:23.021Z,1520548583.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:23.036Z,1520548583.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:23.402Z,1520548583.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:23.422Z,1520548583.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:23.809Z,1520548583.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:23.824Z,1520548583.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:24.209Z,1520548584.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:24.230Z,1520548584.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:24.621Z,1520548584.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:24.636Z,1520548584.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:25.014Z,1520548585.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:25.029Z,1520548585.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:25.408Z,1520548585.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:25.423Z,1520548585.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:25.811Z,1520548585.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:25.826Z,1520548585.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:26.212Z,1520548586.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:26.235Z,1520548586.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:26.617Z,1520548586.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:26.632Z,1520548586.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:27.010Z,1520548587.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:27.038Z,1520548587.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:27.405Z,1520548587.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:27.426Z,1520548587.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:27.812Z,1520548587.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:27.827Z,1520548587.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:28.217Z,1520548588.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:28.233Z,1520548588.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:28.617Z,1520548588.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:28.633Z,1520548588.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:29.017Z,1520548589.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:29.033Z,1520548589.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:29.400Z,1520548589.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:29.431Z,1520548589.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:29.807Z,1520548589.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:29.823Z,1520548589.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:30.217Z,1520548590.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:30.232Z,1520548590.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:30.617Z,1520548590.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:30.633Z,1520548590.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:31.016Z,1520548591.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:31.035Z,1520548591.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:31.409Z,1520548591.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:31.424Z,1520548591.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:31.814Z,1520548591.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:31.829Z,1520548591.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:32.217Z,1520548592.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:32.232Z,1520548592.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:32.617Z,1520548592.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:32.632Z,1520548592.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:33.017Z,1520548593.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:33.036Z,1520548593.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:33.412Z,1520548593.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:33.427Z,1520548593.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:33.807Z,1520548593.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:33.824Z,1520548593.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:34.217Z,1520548594.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:34.233Z,1520548594.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:34.622Z,1520548594.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:34.637Z,1520548594.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:35.016Z,1520548595.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:35.032Z,1520548595.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:35.400Z,1520548595.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:35.427Z,1520548595.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:35.811Z,1520548595.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:35.831Z,1520548595.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:36.218Z,1520548596.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:36.233Z,1520548596.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:36.621Z,1520548596.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:36.636Z,1520548596.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:37.017Z,1520548597.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:37.035Z,1520548597.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:37.412Z,1520548597.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:37.427Z,1520548597.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:37.810Z,1520548597.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:37.831Z,1520548597.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:38.232Z,1520548598.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:38.247Z,1520548598.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:38.627Z,1520548598.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:38.642Z,1520548598.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:39.017Z,1520548599.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:39.033Z,1520548599.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:39.407Z,1520548599.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:39.434Z,1520548599.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:39.799Z,1520548599.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:39.838Z,1520548599.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:40.205Z,1520548600.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:40.239Z,1520548600.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:40.620Z,1520548600.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:40.643Z,1520548600.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:41.020Z,1520548601.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:41.035Z,1520548601.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:41.404Z,1520548601.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:41.431Z,1520548601.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:41.798Z,1520548601.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:41.830Z,1520548601.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:42.222Z,1520548602.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:42.237Z,1520548602.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:42.617Z,1520548602.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:42.635Z,1520548602.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:43.017Z,1520548603.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:43.033Z,1520548603.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:43.399Z,1520548603.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:43.433Z,1520548603.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:43.802Z,1520548603.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:43.829Z,1520548603.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:44.222Z,1520548604.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:44.237Z,1520548604.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:44.622Z,1520548604.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:44.637Z,1520548604.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:45.005Z,1520548605.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:45.039Z,1520548605.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:45.403Z,1520548605.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:45.430Z,1520548605.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:45.795Z,1520548605.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:45.831Z,1520548605.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:46.206Z,1520548606.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:46.241Z,1520548606.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:46.625Z,1520548606.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:46.641Z,1520548606.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:47.021Z,1520548607.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:47.036Z,1520548607.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:47.396Z,1520548607.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:47.424Z,1520548607.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:47.798Z,1520548607.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:47.834Z,1520548607.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:48.195Z,1520548608.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:48.210Z,1520548608.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:48.609Z,1520548608.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:48.643Z,1520548608.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:49.029Z,1520548609.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:49.044Z,1520548609.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:49.412Z,1520548609.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:49.447Z,1520548609.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:49.796Z,1520548609.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:49.811Z,1520548609.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:50.200Z,1520548610.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:50.215Z,1520548610.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:50.607Z,1520548610.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:50.622Z,1520548610.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:50.995Z,1520548610.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:51.024Z,1520548611.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:51.417Z,1520548611.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:51.448Z,1520548611.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:51.821Z,1520548611.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:51.850Z,1520548611.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:52.205Z,1520548612.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:52.220Z,1520548612.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:52.608Z,1520548612.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:52.650Z,1520548612.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:53.007Z,1520548613.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:53.023Z,1520548613.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:53.403Z,1520548613.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:53.419Z,1520548613.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:53.808Z,1520548613.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:53.823Z,1520548613.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:54.217Z,1520548614.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:54.249Z,1520548614.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:54.617Z,1520548614.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:54.648Z,1520548614.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:55.021Z,1520548615.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:55.044Z,1520548615.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:55.407Z,1520548615.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:55.423Z,1520548615.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:55.804Z,1520548615.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:55.827Z,1520548615.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:56.217Z,1520548616.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:56.248Z,1520548616.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:56.617Z,1520548616.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:56.650Z,1520548616.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:57.009Z,1520548617.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:57.025Z,1520548617.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:57.405Z,1520548617.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:57.426Z,1520548617.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:57.804Z,1520548617.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:57.821Z,1520548617.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:58.209Z,1520548618.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:58.225Z,1520548618.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:58.621Z,1520548618.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:58.652Z,1520548618.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:59.021Z,1520548619.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:59.052Z,1520548619.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:59.405Z,1520548619.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:59.420Z,1520548619.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:36:59.805Z,1520548619.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:36:59.821Z,1520548619.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:00.217Z,1520548620.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:00.249Z,1520548620.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:00.621Z,1520548620.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:00.636Z,1520548620.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:01.013Z,1520548621.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:01.029Z,1520548621.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:01.413Z,1520548621.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:01.428Z,1520548621.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:01.808Z,1520548621.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:01.823Z,1520548621.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:02.217Z,1520548622.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:02.233Z,1520548622.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:02.615Z,1520548622.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:02.630Z,1520548622.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:03.013Z,1520548623.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:03.029Z,1520548623.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:03.407Z,1520548623.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:03.426Z,1520548623.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:03.806Z,1520548623.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:03.827Z,1520548623.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:04.214Z,1520548624.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:04.229Z,1520548624.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:04.614Z,1520548624.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:04.629Z,1520548624.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:05.013Z,1520548625.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:05.034Z,1520548625.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:05.412Z,1520548625.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:05.427Z,1520548625.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:05.808Z,1520548625.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:05.831Z,1520548625.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:08.929Z,1520548628.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:08.961Z,1520548628.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:09.060Z,1520548629.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:09.100Z,1520548629.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:09.429Z,1520548629.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:09.460Z,1520548629.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:09.817Z,1520548629.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:09.833Z,1520548629.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:10.218Z,1520548630.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:10.233Z,1520548630.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:10.613Z,1520548630.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:10.633Z,1520548630.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:11.014Z,1520548631.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:11.042Z,1520548631.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:11.430Z,1520548631.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:11.462Z,1520548631.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:11.825Z,1520548631.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:11.840Z,1520548631.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:12.222Z,1520548632.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:12.237Z,1520548632.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:12.618Z,1520548632.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:12.634Z,1520548632.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:13.018Z,1520548633.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:13.033Z,1520548633.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:13.419Z,1520548633.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:13.435Z,1520548633.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:13.818Z,1520548633.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:13.834Z,1520548633.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:14.233Z,1520548634.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:14.268Z,1520548634.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:14.620Z,1520548634.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:14.635Z,1520548634.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:15.021Z,1520548635.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:15.037Z,1520548635.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:15.409Z,1520548635.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:15.437Z,1520548635.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:15.815Z,1520548635.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:15.830Z,1520548635.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:16.225Z,1520548636.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:16.247Z,1520548636.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:16.630Z,1520548636.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:16.645Z,1520548636.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:17.029Z,1520548637.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:17.060Z,1520548637.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:17.409Z,1520548637.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:17.424Z,1520548637.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:17.833Z,1520548637.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:17.865Z,1520548637.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:18.221Z,1520548638.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:18.249Z,1520548638.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:18.621Z,1520548638.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:18.647Z,1520548638.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:19.018Z,1520548639.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:19.044Z,1520548639.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:19.407Z,1520548639.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:19.422Z,1520548639.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:19.815Z,1520548639.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:19.848Z,1520548639.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:20.243Z,1520548640.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:20.259Z,1520548640.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:20.625Z,1520548640.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:20.649Z,1520548640.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:21.026Z,1520548641.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:21.051Z,1520548641.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:21.415Z,1520548641.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:21.448Z,1520548641.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:21.812Z,1520548641.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:21.827Z,1520548641.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:22.221Z,1520548642.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:22.257Z,1520548642.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:22.625Z,1520548642.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:22.656Z,1520548642.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:23.025Z,1520548643.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:23.053Z,1520548643.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:23.416Z,1520548643.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:23.431Z,1520548643.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:23.813Z,1520548643.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:23.828Z,1520548643.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:24.229Z,1520548644.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:24.253Z,1520548644.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:24.625Z,1520548644.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:24.656Z,1520548644.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:25.021Z,1520548645.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:25.036Z,1520548645.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:25.416Z,1520548645.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:25.431Z,1520548645.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:25.812Z,1520548645.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:25.827Z,1520548645.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:26.229Z,1520548646.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:26.258Z,1520548646.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:26.617Z,1520548646.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:26.632Z,1520548646.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:27.029Z,1520548647.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:27.060Z,1520548647.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:27.416Z,1520548647.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:27.431Z,1520548647.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:27.815Z,1520548647.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:27.831Z,1520548647.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:28.225Z,1520548648.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:28.257Z,1520548648.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:28.629Z,1520548648.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:28.663Z,1520548648.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:29.021Z,1520548649.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:29.042Z,1520548649.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:29.416Z,1520548649.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:29.431Z,1520548649.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:29.815Z,1520548649.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:29.834Z,1520548649.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:30.229Z,1520548650.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:30.244Z,1520548650.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:30.622Z,1520548650.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:30.642Z,1520548650.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:31.021Z,1520548651.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:31.037Z,1520548651.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:31.420Z,1520548651.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:31.435Z,1520548651.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:31.818Z,1520548651.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:31.833Z,1520548651.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:32.221Z,1520548652.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:32.237Z,1520548652.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:32.621Z,1520548652.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:32.636Z,1520548652.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:33.021Z,1520548653.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:33.037Z,1520548653.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:33.416Z,1520548653.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:33.439Z,1520548653.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:33.818Z,1520548653.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:33.833Z,1520548653.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:34.221Z,1520548654.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:34.237Z,1520548654.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:34.625Z,1520548654.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:34.640Z,1520548654.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:35.021Z,1520548655.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:35.042Z,1520548655.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:35.420Z,1520548655.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:35.435Z,1520548655.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:35.817Z,1520548655.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:35.833Z,1520548655.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:36.221Z,1520548656.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:36.236Z,1520548656.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:36.625Z,1520548656.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:36.640Z,1520548656.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:37.021Z,1520548657.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:37.037Z,1520548657.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:37.419Z,1520548657.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:37.434Z,1520548657.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:37.818Z,1520548657.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:37.833Z,1520548657.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:38.233Z,1520548658.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:38.265Z,1520548658.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:38.624Z,1520548658.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:38.639Z,1520548658.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:39.024Z,1520548659.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:39.039Z,1520548659.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:39.420Z,1520548659.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:39.436Z,1520548659.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:39.820Z,1520548659.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:39.835Z,1520548659.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:40.225Z,1520548660.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:40.240Z,1520548660.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:40.625Z,1520548660.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:40.640Z,1520548660.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:41.025Z,1520548661.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:41.046Z,1520548661.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:41.418Z,1520548661.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:41.433Z,1520548661.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:41.822Z,1520548661.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:41.837Z,1520548661.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:42.239Z,1520548662.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:42.285Z,1520548662.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:42.631Z,1520548662.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:42.655Z,1520548662.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:43.027Z,1520548663.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:43.051Z,1520548663.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:43.410Z,1520548663.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:43.450Z,1520548663.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:43.809Z,1520548663.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:43.844Z,1520548663.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:44.219Z,1520548664.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:44.255Z,1520548664.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:44.621Z,1520548664.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:44.651Z,1520548664.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:45.035Z,1520548665.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:45.050Z,1520548665.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:45.424Z,1520548665.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:45.448Z,1520548665.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:45.809Z,1520548665.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:45.858Z,1520548665.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:46.225Z,1520548666.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:46.254Z,1520548666.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:46.625Z,1520548666.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:46.655Z,1520548666.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:47.025Z,1520548667.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:47.059Z,1520548667.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:47.412Z,1520548667.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:47.428Z,1520548667.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:47.815Z,1520548667.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:47.830Z,1520548667.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:48.225Z,1520548668.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:48.261Z,1520548668.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:48.626Z,1520548668.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:48.641Z,1520548668.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:49.022Z,1520548669.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:49.038Z,1520548669.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:49.416Z,1520548669.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:49.432Z,1520548669.432 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:49.432Z,1520548669.432 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 297
2018-03-08T22:37:49.432Z,1520548669.432 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T22:37:49.434Z,1520548669.434 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:49.434Z,1520548669.434 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 297
2018-03-08T22:37:49.434Z,1520548669.434 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T22:37:49.436Z,1520548669.436 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:49.436Z,1520548669.436 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 297
2018-03-08T22:37:49.436Z,1520548669.436 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T22:37:49.468Z,1520548669.468 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T22:37:49.473Z,1520548669.473 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T22:37:49.473Z,1520548669.473 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T22:37:49.809Z,1520548669.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:49.855Z,1520548669.855 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T22:37:49.856Z,1520548669.856 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 297
2018-03-08T22:37:49.856Z,1520548669.856 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T22:37:49.856Z,1520548669.856 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 297
2018-03-08T22:37:49.861Z,1520548669.861 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T22:37:49.861Z,1520548669.861 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 297
2018-03-08T22:37:50.228Z,1520548670.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:50.249Z,1520548670.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T22:37:50.250Z,1520548670.250 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:37:50.250Z,1520548670.250 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:37:50.251Z,1520548670.251 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T22:37:50.251Z,1520548670.251 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:37:50.251Z,1520548670.251 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:37:50.252Z,1520548670.252 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T22:37:50.252Z,1520548670.252 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:37:50.269Z,1520548670.269 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:37:50.629Z,1520548670.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:50.645Z,1520548670.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T22:37:50.646Z,1520548670.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:51.022Z,1520548671.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:51.044Z,1520548671.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T22:37:51.046Z,1520548671.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:51.407Z,1520548671.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:51.434Z,1520548671.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T22:37:51.435Z,1520548671.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:51.824Z,1520548671.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:51.838Z,1520548671.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T22:37:51.839Z,1520548671.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:52.226Z,1520548672.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:52.240Z,1520548672.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T22:37:52.241Z,1520548672.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:52.629Z,1520548672.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:52.643Z,1520548672.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T22:37:52.644Z,1520548672.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:53.030Z,1520548673.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:53.044Z,1520548673.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T22:37:53.045Z,1520548673.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:53.420Z,1520548673.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:53.435Z,1520548673.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T22:37:53.435Z,1520548673.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:53.807Z,1520548673.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:53.843Z,1520548673.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T22:37:53.843Z,1520548673.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:54.233Z,1520548674.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:54.254Z,1520548674.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T22:37:54.255Z,1520548674.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:54.632Z,1520548674.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:54.647Z,1520548674.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T22:37:54.648Z,1520548674.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:55.025Z,1520548675.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:55.040Z,1520548675.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T22:37:55.041Z,1520548675.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:55.407Z,1520548675.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:55.446Z,1520548675.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T22:37:55.447Z,1520548675.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:55.807Z,1520548675.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:55.842Z,1520548675.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T22:37:55.843Z,1520548675.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:56.229Z,1520548676.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:56.244Z,1520548676.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T22:37:56.245Z,1520548676.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:56.633Z,1520548676.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:56.647Z,1520548676.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T22:37:56.648Z,1520548676.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:57.017Z,1520548677.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:57.048Z,1520548677.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T22:37:57.049Z,1520548677.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:57.419Z,1520548677.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:57.434Z,1520548677.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T22:37:57.435Z,1520548677.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:57.806Z,1520548677.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:57.834Z,1520548677.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T22:37:57.835Z,1520548677.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:58.225Z,1520548678.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:58.240Z,1520548678.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T22:37:58.241Z,1520548678.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:58.630Z,1520548678.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:58.650Z,1520548678.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T22:37:58.651Z,1520548678.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:59.030Z,1520548679.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:59.044Z,1520548679.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T22:37:59.045Z,1520548679.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:59.420Z,1520548679.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:59.435Z,1520548679.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T22:37:59.436Z,1520548679.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:37:59.806Z,1520548679.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:37:59.838Z,1520548679.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T22:37:59.839Z,1520548679.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:00.230Z,1520548680.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:00.244Z,1520548680.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T22:38:00.245Z,1520548680.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:00.633Z,1520548680.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:00.647Z,1520548680.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T22:38:00.649Z,1520548680.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:01.025Z,1520548681.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:01.040Z,1520548681.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T22:38:01.041Z,1520548681.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:01.411Z,1520548681.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:01.426Z,1520548681.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T22:38:01.427Z,1520548681.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:01.838Z,1520548681.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:01.854Z,1520548681.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T22:38:01.855Z,1520548681.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:02.221Z,1520548682.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:02.236Z,1520548682.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T22:38:02.237Z,1520548682.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:02.645Z,1520548682.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:02.660Z,1520548682.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T22:38:02.661Z,1520548682.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:03.013Z,1520548683.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:03.028Z,1520548683.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T22:38:03.029Z,1520548683.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:03.410Z,1520548683.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:03.468Z,1520548683.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T22:38:03.469Z,1520548683.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:03.810Z,1520548683.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:03.825Z,1520548683.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T22:38:03.826Z,1520548683.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:04.213Z,1520548684.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:04.228Z,1520548684.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T22:38:04.229Z,1520548684.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:04.621Z,1520548684.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:04.636Z,1520548684.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T22:38:04.637Z,1520548684.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:04.640Z,1520548684.640 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T22:38:04.640Z,1520548684.640 [Default:CheckIn:C.Wait] Stopped
2018-03-08T22:38:04.640Z,1520548684.640 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T22:38:04.640Z,1520548684.640 [Default:CheckIn:D] Running Loop=1
2018-03-08T22:38:05.020Z,1520548685.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:05.034Z,1520548685.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T22:38:05.035Z,1520548685.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:05.038Z,1520548685.038 [Default:CheckIn:D] Stopped
2018-03-08T22:38:05.039Z,1520548685.039 [Default:CheckIn:E] Running Loop=1
2018-03-08T22:38:05.410Z,1520548685.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:05.458Z,1520548685.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T22:38:05.459Z,1520548685.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:05.471Z,1520548685.471 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 892.337240 min 
2018-03-08T22:38:05.471Z,1520548685.471 [Default:CheckIn:E] Stopped
2018-03-08T22:38:05.471Z,1520548685.471 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T22:38:05.471Z,1520548685.471 [Default:CheckIn] Stopped
2018-03-08T22:38:05.472Z,1520548685.472 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T22:38:05.472Z,1520548685.472 [Default:CheckIn](INFO): Running loop #87
2018-03-08T22:38:05.472Z,1520548685.472 [Default:CheckIn] Running Loop=87
2018-03-08T22:38:05.472Z,1520548685.472 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T22:38:05.472Z,1520548685.472 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T22:38:05.810Z,1520548685.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:05.830Z,1520548685.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T22:38:05.831Z,1520548685.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:09.566Z,1520548689.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:09.582Z,1520548689.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:09.689Z,1520548689.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:09.722Z,1520548689.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:10.046Z,1520548690.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:10.072Z,1520548690.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:10.435Z,1520548690.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:10.470Z,1520548690.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:10.830Z,1520548690.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:10.850Z,1520548690.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:11.245Z,1520548691.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:11.280Z,1520548691.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:11.653Z,1520548691.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:11.679Z,1520548691.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:12.049Z,1520548692.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:12.074Z,1520548692.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:12.439Z,1520548692.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:12.454Z,1520548692.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:12.835Z,1520548692.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:12.850Z,1520548692.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:13.249Z,1520548693.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:13.281Z,1520548693.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:13.645Z,1520548693.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:13.660Z,1520548693.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:14.041Z,1520548694.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:14.062Z,1520548694.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:14.436Z,1520548694.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:14.451Z,1520548694.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:14.834Z,1520548694.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:14.849Z,1520548694.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:15.250Z,1520548695.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:15.287Z,1520548695.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:15.649Z,1520548695.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:15.664Z,1520548695.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:16.041Z,1520548696.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:16.057Z,1520548696.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:16.439Z,1520548696.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:16.454Z,1520548696.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:16.838Z,1520548696.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:16.853Z,1520548696.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:17.240Z,1520548697.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:17.255Z,1520548697.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:17.645Z,1520548697.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:17.660Z,1520548697.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:18.042Z,1520548698.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:18.058Z,1520548698.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:18.438Z,1520548698.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:18.454Z,1520548698.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:18.838Z,1520548698.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:18.853Z,1520548698.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:19.266Z,1520548699.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:19.297Z,1520548699.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:19.641Z,1520548699.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:19.656Z,1520548699.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:20.041Z,1520548700.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:20.062Z,1520548700.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:20.433Z,1520548700.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:20.448Z,1520548700.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:20.833Z,1520548700.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:20.857Z,1520548700.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:21.245Z,1520548701.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:21.260Z,1520548701.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:21.645Z,1520548701.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:21.660Z,1520548701.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:22.044Z,1520548702.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:22.066Z,1520548702.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:22.440Z,1520548702.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:22.455Z,1520548702.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:22.839Z,1520548702.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:22.858Z,1520548702.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:23.244Z,1520548703.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:23.266Z,1520548703.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:23.645Z,1520548703.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:23.660Z,1520548703.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:24.045Z,1520548704.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:24.061Z,1520548704.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:24.433Z,1520548704.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:24.453Z,1520548704.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:24.835Z,1520548704.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:24.851Z,1520548704.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:25.244Z,1520548705.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:25.259Z,1520548705.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:25.645Z,1520548705.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:25.660Z,1520548705.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:26.044Z,1520548706.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:26.060Z,1520548706.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:26.439Z,1520548706.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:26.458Z,1520548706.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:26.839Z,1520548706.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:26.858Z,1520548706.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:27.244Z,1520548707.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:27.260Z,1520548707.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:27.645Z,1520548707.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:27.661Z,1520548707.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:28.044Z,1520548708.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:28.066Z,1520548708.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:28.440Z,1520548708.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:28.455Z,1520548708.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:28.839Z,1520548708.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:28.854Z,1520548708.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:29.244Z,1520548709.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:29.266Z,1520548709.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:29.645Z,1520548709.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:29.660Z,1520548709.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:30.044Z,1520548710.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:30.059Z,1520548710.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:30.440Z,1520548710.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:30.455Z,1520548710.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:30.839Z,1520548710.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:30.854Z,1520548710.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:31.239Z,1520548711.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:31.259Z,1520548711.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:31.648Z,1520548711.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:31.671Z,1520548711.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:32.049Z,1520548712.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:32.070Z,1520548712.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:32.438Z,1520548712.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:32.458Z,1520548712.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:32.835Z,1520548712.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:32.855Z,1520548712.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:33.249Z,1520548713.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:33.264Z,1520548713.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:33.648Z,1520548713.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:33.670Z,1520548713.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:34.049Z,1520548714.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:34.064Z,1520548714.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:34.440Z,1520548714.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:34.456Z,1520548714.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:34.839Z,1520548714.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:34.858Z,1520548714.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:35.249Z,1520548715.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:35.264Z,1520548715.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:35.648Z,1520548715.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:35.663Z,1520548715.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:36.048Z,1520548716.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:36.070Z,1520548716.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:36.433Z,1520548716.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:36.461Z,1520548716.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:36.839Z,1520548716.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:36.854Z,1520548716.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:37.249Z,1520548717.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:37.270Z,1520548717.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:37.649Z,1520548717.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:37.664Z,1520548717.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:38.049Z,1520548718.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:38.064Z,1520548718.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:38.439Z,1520548718.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:38.455Z,1520548718.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:38.826Z,1520548718.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:38.858Z,1520548718.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:39.251Z,1520548719.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:39.266Z,1520548719.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:39.652Z,1520548719.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:39.667Z,1520548719.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:40.049Z,1520548720.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:40.094Z,1520548720.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:40.427Z,1520548720.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:40.462Z,1520548720.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:40.839Z,1520548720.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:40.858Z,1520548720.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:41.249Z,1520548721.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:41.270Z,1520548721.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:41.653Z,1520548721.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:41.668Z,1520548721.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:42.051Z,1520548722.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:42.066Z,1520548722.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:42.440Z,1520548722.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:42.455Z,1520548722.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:42.827Z,1520548722.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:42.857Z,1520548722.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:43.253Z,1520548723.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:43.268Z,1520548723.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:43.653Z,1520548723.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:43.667Z,1520548723.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:44.052Z,1520548724.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:44.067Z,1520548724.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:44.437Z,1520548724.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:44.457Z,1520548724.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:44.828Z,1520548724.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:44.860Z,1520548724.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:45.252Z,1520548725.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:45.274Z,1520548725.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:45.654Z,1520548725.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:45.675Z,1520548725.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:46.051Z,1520548726.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:46.066Z,1520548726.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:46.427Z,1520548726.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:46.462Z,1520548726.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:46.831Z,1520548726.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:46.866Z,1520548726.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:47.245Z,1520548727.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:47.265Z,1520548727.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:47.649Z,1520548727.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:47.665Z,1520548727.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:48.046Z,1520548728.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:48.062Z,1520548728.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:48.426Z,1520548728.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:48.463Z,1520548728.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:48.830Z,1520548728.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:48.867Z,1520548728.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:49.237Z,1520548729.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:49.273Z,1520548729.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:49.653Z,1520548729.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:49.669Z,1520548729.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:50.050Z,1520548730.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:50.066Z,1520548730.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:50.423Z,1520548730.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:50.439Z,1520548730.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:50.830Z,1520548730.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:50.867Z,1520548730.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:51.241Z,1520548731.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:51.268Z,1520548731.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:51.654Z,1520548731.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:51.669Z,1520548731.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:52.037Z,1520548732.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:52.063Z,1520548732.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:52.427Z,1520548732.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:52.442Z,1520548732.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:52.835Z,1520548732.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:52.868Z,1520548732.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:53.245Z,1520548733.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:53.274Z,1520548733.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:53.657Z,1520548733.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:53.678Z,1520548733.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:54.033Z,1520548734.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:54.061Z,1520548734.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:54.435Z,1520548734.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:54.451Z,1520548734.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:54.834Z,1520548734.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:54.849Z,1520548734.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:55.233Z,1520548735.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:55.249Z,1520548735.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:55.645Z,1520548735.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:55.673Z,1520548735.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:56.049Z,1520548736.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:56.081Z,1520548736.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:56.434Z,1520548736.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:56.449Z,1520548736.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:56.831Z,1520548736.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:56.851Z,1520548736.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:57.244Z,1520548737.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:57.259Z,1520548737.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:57.649Z,1520548737.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:57.681Z,1520548737.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:58.037Z,1520548738.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:58.052Z,1520548738.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:58.436Z,1520548738.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:58.451Z,1520548738.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:58.835Z,1520548738.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:58.851Z,1520548738.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:59.237Z,1520548739.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:59.253Z,1520548739.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:38:59.641Z,1520548739.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:38:59.656Z,1520548739.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:00.036Z,1520548740.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:00.051Z,1520548740.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:00.431Z,1520548740.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:00.447Z,1520548740.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:00.839Z,1520548740.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:00.854Z,1520548740.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:01.245Z,1520548741.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:01.260Z,1520548741.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:01.645Z,1520548741.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:01.660Z,1520548741.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:02.044Z,1520548742.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:02.059Z,1520548742.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:02.436Z,1520548742.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:02.451Z,1520548742.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:02.835Z,1520548742.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:02.850Z,1520548742.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:03.246Z,1520548743.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:03.266Z,1520548743.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:03.641Z,1520548743.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:03.656Z,1520548743.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:04.044Z,1520548744.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:04.059Z,1520548744.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:04.440Z,1520548744.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:04.455Z,1520548744.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:04.828Z,1520548744.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:04.855Z,1520548744.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:05.249Z,1520548745.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:05.265Z,1520548745.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:05.650Z,1520548745.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:05.665Z,1520548745.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:06.042Z,1520548746.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:06.063Z,1520548746.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:09.144Z,1520548749.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:09.160Z,1520548749.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:09.253Z,1520548749.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:09.298Z,1520548749.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:09.625Z,1520548749.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:09.651Z,1520548749.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:10.039Z,1520548750.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:10.055Z,1520548750.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:10.425Z,1520548750.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:10.452Z,1520548750.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:10.807Z,1520548750.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:10.822Z,1520548750.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:11.218Z,1520548751.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:11.241Z,1520548751.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:11.613Z,1520548751.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:11.628Z,1520548751.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:12.011Z,1520548752.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:12.030Z,1520548752.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:12.425Z,1520548752.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:12.461Z,1520548752.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:12.829Z,1520548752.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:12.860Z,1520548752.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:13.225Z,1520548753.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:13.240Z,1520548753.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:13.617Z,1520548753.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:13.632Z,1520548753.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:14.011Z,1520548754.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:14.026Z,1520548754.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:14.411Z,1520548754.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:14.435Z,1520548754.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:14.819Z,1520548754.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:14.835Z,1520548754.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:15.220Z,1520548755.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:15.236Z,1520548755.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:15.621Z,1520548755.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:15.636Z,1520548755.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:16.025Z,1520548756.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:16.041Z,1520548756.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:16.419Z,1520548756.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:16.442Z,1520548756.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:16.816Z,1520548756.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:16.832Z,1520548756.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:17.225Z,1520548757.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:17.241Z,1520548757.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:17.621Z,1520548757.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:17.694Z,1520548757.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:18.022Z,1520548758.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:18.037Z,1520548758.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:18.421Z,1520548758.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:18.437Z,1520548758.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:18.809Z,1520548758.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:18.832Z,1520548758.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:19.222Z,1520548759.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:19.237Z,1520548759.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:19.623Z,1520548759.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:19.639Z,1520548759.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:20.026Z,1520548760.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:20.041Z,1520548760.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:20.417Z,1520548760.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:20.566Z,1520548760.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:20.814Z,1520548760.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:20.830Z,1520548760.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:21.221Z,1520548761.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:21.237Z,1520548761.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:21.714Z,1520548761.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:21.733Z,1520548761.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:22.021Z,1520548762.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:22.037Z,1520548762.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:22.417Z,1520548762.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:22.432Z,1520548762.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:22.815Z,1520548762.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:22.831Z,1520548762.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:23.222Z,1520548763.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:23.237Z,1520548763.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:23.626Z,1520548763.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:23.642Z,1520548763.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:24.020Z,1520548764.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:24.036Z,1520548764.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:24.420Z,1520548764.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:24.436Z,1520548764.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:24.818Z,1520548764.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:24.833Z,1520548764.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:25.220Z,1520548765.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:25.235Z,1520548765.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:25.621Z,1520548765.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:25.636Z,1520548765.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:26.025Z,1520548766.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:26.041Z,1520548766.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:26.420Z,1520548766.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:26.435Z,1520548766.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:26.819Z,1520548766.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:26.833Z,1520548766.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:27.225Z,1520548767.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:27.241Z,1520548767.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:27.625Z,1520548767.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:27.640Z,1520548767.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:28.025Z,1520548768.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:28.046Z,1520548768.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:28.419Z,1520548768.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:28.435Z,1520548768.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:28.818Z,1520548768.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:28.833Z,1520548768.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:29.225Z,1520548769.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:29.240Z,1520548769.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:29.625Z,1520548769.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:29.640Z,1520548769.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:30.020Z,1520548770.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:30.042Z,1520548770.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:30.419Z,1520548770.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:30.434Z,1520548770.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:30.818Z,1520548770.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:30.833Z,1520548770.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:31.225Z,1520548771.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:31.241Z,1520548771.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:31.625Z,1520548771.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:31.640Z,1520548771.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:32.025Z,1520548772.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:32.041Z,1520548772.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:32.413Z,1520548772.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:32.433Z,1520548772.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:32.816Z,1520548772.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:32.831Z,1520548772.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:33.220Z,1520548773.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:33.236Z,1520548773.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:33.625Z,1520548773.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:33.640Z,1520548773.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:34.025Z,1520548774.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:34.046Z,1520548774.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:34.419Z,1520548774.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:34.438Z,1520548774.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:34.818Z,1520548774.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:34.833Z,1520548774.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:35.225Z,1520548775.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:35.240Z,1520548775.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:35.625Z,1520548775.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:35.640Z,1520548775.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:36.025Z,1520548776.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:36.041Z,1520548776.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:36.419Z,1520548776.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:36.434Z,1520548776.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:36.819Z,1520548776.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:36.834Z,1520548776.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:37.225Z,1520548777.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:37.240Z,1520548777.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:37.620Z,1520548777.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:37.635Z,1520548777.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:38.026Z,1520548778.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:38.041Z,1520548778.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:38.419Z,1520548778.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:38.434Z,1520548778.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:38.819Z,1520548778.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:38.834Z,1520548778.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:39.225Z,1520548779.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:39.241Z,1520548779.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:39.621Z,1520548779.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:39.637Z,1520548779.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:40.021Z,1520548780.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:40.042Z,1520548780.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:40.419Z,1520548780.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:40.438Z,1520548780.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:40.818Z,1520548780.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:40.833Z,1520548780.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:41.220Z,1520548781.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:41.235Z,1520548781.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:41.625Z,1520548781.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:41.641Z,1520548781.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:42.025Z,1520548782.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:42.040Z,1520548782.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:42.423Z,1520548782.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:42.469Z,1520548782.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:42.819Z,1520548782.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:42.835Z,1520548782.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:43.230Z,1520548783.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:43.246Z,1520548783.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:43.628Z,1520548783.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:43.686Z,1520548783.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:44.028Z,1520548784.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:44.056Z,1520548784.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:44.419Z,1520548784.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:44.434Z,1520548784.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:44.807Z,1520548784.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:44.834Z,1520548784.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:45.240Z,1520548785.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:45.264Z,1520548785.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:45.638Z,1520548785.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:45.653Z,1520548785.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:46.019Z,1520548786.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:46.086Z,1520548786.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:46.417Z,1520548786.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:46.447Z,1520548786.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:46.815Z,1520548786.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:46.846Z,1520548786.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:47.224Z,1520548787.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:47.254Z,1520548787.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:47.622Z,1520548787.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:47.653Z,1520548787.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:48.025Z,1520548788.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:48.049Z,1520548788.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:48.415Z,1520548788.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:48.430Z,1520548788.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:48.808Z,1520548788.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:48.823Z,1520548788.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:49.225Z,1520548789.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:49.258Z,1520548789.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:49.629Z,1520548789.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:49.655Z,1520548789.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:50.025Z,1520548790.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:50.061Z,1520548790.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:50.417Z,1520548790.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:50.433Z,1520548790.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:50.816Z,1520548790.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:50.831Z,1520548790.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:51.225Z,1520548791.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:51.261Z,1520548791.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:51.629Z,1520548791.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:51.644Z,1520548791.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:52.021Z,1520548792.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:52.036Z,1520548792.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:52.415Z,1520548792.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:52.435Z,1520548792.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:52.811Z,1520548792.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:52.833Z,1520548792.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:53.222Z,1520548793.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:53.237Z,1520548793.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:53.625Z,1520548793.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:53.641Z,1520548793.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:54.022Z,1520548794.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:54.037Z,1520548794.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:54.416Z,1520548794.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:54.432Z,1520548794.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:54.817Z,1520548794.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:54.838Z,1520548794.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:55.222Z,1520548795.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:55.237Z,1520548795.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:55.622Z,1520548795.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:55.637Z,1520548795.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:56.021Z,1520548796.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:56.042Z,1520548796.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:56.419Z,1520548796.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:56.435Z,1520548796.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:56.817Z,1520548796.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:56.832Z,1520548796.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:57.238Z,1520548797.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:57.263Z,1520548797.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:57.621Z,1520548797.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:57.636Z,1520548797.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:58.021Z,1520548798.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:58.042Z,1520548798.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:58.414Z,1520548798.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:58.429Z,1520548798.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:58.816Z,1520548798.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:58.831Z,1520548798.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:59.221Z,1520548799.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:59.237Z,1520548799.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:39:59.638Z,1520548799.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:39:59.685Z,1520548799.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:00.022Z,1520548800.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:00.042Z,1520548800.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:00.417Z,1520548800.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:00.432Z,1520548800.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:00.815Z,1520548800.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:00.838Z,1520548800.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:01.217Z,1520548801.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:01.238Z,1520548801.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:01.630Z,1520548801.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:01.667Z,1520548801.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:02.017Z,1520548802.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:02.076Z,1520548802.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:02.416Z,1520548802.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:02.431Z,1520548802.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:02.816Z,1520548802.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:02.831Z,1520548802.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:03.218Z,1520548803.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:03.233Z,1520548803.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:03.621Z,1520548803.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:03.636Z,1520548803.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:04.029Z,1520548804.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:04.044Z,1520548804.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:04.411Z,1520548804.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:04.430Z,1520548804.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:04.816Z,1520548804.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:04.831Z,1520548804.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:05.221Z,1520548805.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:05.236Z,1520548805.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:05.629Z,1520548805.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:05.644Z,1520548805.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:06.022Z,1520548806.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:06.037Z,1520548806.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:06.416Z,1520548806.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:06.431Z,1520548806.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:09.512Z,1520548809.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:09.533Z,1520548809.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:09.645Z,1520548809.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:09.674Z,1520548809.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:10.013Z,1520548810.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:10.028Z,1520548810.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:10.396Z,1520548810.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:10.423Z,1520548810.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:10.791Z,1520548810.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:10.822Z,1520548810.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:11.182Z,1520548811.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:11.197Z,1520548811.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:11.581Z,1520548811.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:11.597Z,1520548811.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:11.986Z,1520548811.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:12.026Z,1520548812.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:12.397Z,1520548812.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:12.429Z,1520548812.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:12.793Z,1520548812.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:12.808Z,1520548812.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:13.201Z,1520548813.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:13.232Z,1520548813.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:13.587Z,1520548813.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:13.602Z,1520548813.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:13.980Z,1520548813.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:13.996Z,1520548813.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:14.385Z,1520548814.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:14.408Z,1520548814.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:14.788Z,1520548814.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:14.803Z,1520548814.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:15.185Z,1520548815.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:15.201Z,1520548815.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:15.593Z,1520548815.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:15.609Z,1520548815.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:16.001Z,1520548816.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:16.016Z,1520548816.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:16.401Z,1520548816.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:16.433Z,1520548816.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:16.790Z,1520548816.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:16.805Z,1520548816.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:17.187Z,1520548817.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:17.202Z,1520548817.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:17.591Z,1520548817.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:17.607Z,1520548817.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:17.990Z,1520548817.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:18.005Z,1520548818.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:18.393Z,1520548818.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:18.408Z,1520548818.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:18.792Z,1520548818.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:18.808Z,1520548818.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:19.194Z,1520548819.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:19.209Z,1520548819.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:19.586Z,1520548819.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:19.601Z,1520548819.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:19.985Z,1520548819.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:20.001Z,1520548820.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:20.387Z,1520548820.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:20.402Z,1520548820.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:20.787Z,1520548820.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:20.802Z,1520548820.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:21.172Z,1520548821.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:21.209Z,1520548821.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:21.600Z,1520548821.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:21.616Z,1520548821.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:21.000Z,1520548822.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:22.015Z,1520548822.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:22.398Z,1520548822.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:22.413Z,1520548822.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:22.790Z,1520548822.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:22.811Z,1520548822.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:23.191Z,1520548823.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:23.210Z,1520548823.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:23.593Z,1520548823.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:23.608Z,1520548823.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:23.988Z,1520548823.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:24.003Z,1520548824.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:24.393Z,1520548824.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:24.408Z,1520548824.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:24.801Z,1520548824.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:24.817Z,1520548824.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:25.201Z,1520548825.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:25.222Z,1520548825.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:25.588Z,1520548825.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:25.603Z,1520548825.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:25.977Z,1520548825.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:26.005Z,1520548826.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:26.379Z,1520548826.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:26.415Z,1520548826.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:26.784Z,1520548826.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:26.810Z,1520548826.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:27.172Z,1520548827.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:27.201Z,1520548827.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:27.602Z,1520548827.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:27.622Z,1520548827.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:28.006Z,1520548828.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:28.022Z,1520548828.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:28.402Z,1520548828.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:28.417Z,1520548828.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:28.780Z,1520548828.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:28.816Z,1520548828.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:29.178Z,1520548829.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:29.212Z,1520548829.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:29.583Z,1520548829.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:29.611Z,1520548829.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:29.979Z,1520548829.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:30.011Z,1520548830.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:30.398Z,1520548830.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:30.413Z,1520548830.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:30.806Z,1520548830.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:30.822Z,1520548830.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:31.205Z,1520548831.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:31.227Z,1520548831.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:31.582Z,1520548831.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:31.609Z,1520548831.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:31.973Z,1520548831.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:31.988Z,1520548831.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:32.379Z,1520548832.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:32.414Z,1520548832.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:32.783Z,1520548832.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:32.816Z,1520548832.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:33.176Z,1520548833.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:33.191Z,1520548833.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:33.593Z,1520548833.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:33.620Z,1520548833.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:33.993Z,1520548833.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:34.020Z,1520548834.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:34.393Z,1520548834.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:34.425Z,1520548834.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:34.783Z,1520548834.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:34.819Z,1520548834.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:35.187Z,1520548835.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:35.202Z,1520548835.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:35.585Z,1520548835.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:35.600Z,1520548835.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:35.987Z,1520548835.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:36.006Z,1520548836.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:36.400Z,1520548836.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:36.415Z,1520548836.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:36.793Z,1520548836.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:36.809Z,1520548836.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:37.202Z,1520548837.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:37.233Z,1520548837.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:37.590Z,1520548837.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:37.606Z,1520548837.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:37.985Z,1520548837.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:38.001Z,1520548838.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:38.387Z,1520548838.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:38.403Z,1520548838.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:38.790Z,1520548838.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:38.806Z,1520548838.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:39.185Z,1520548839.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:39.200Z,1520548839.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:39.593Z,1520548839.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:39.609Z,1520548839.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:39.997Z,1520548839.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:40.012Z,1520548840.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:40.393Z,1520548840.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:40.408Z,1520548840.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:40.790Z,1520548840.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:40.805Z,1520548840.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:41.188Z,1520548841.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:41.206Z,1520548841.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:41.591Z,1520548841.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:41.607Z,1520548841.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:41.991Z,1520548841.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:42.006Z,1520548842.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:42.405Z,1520548842.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:42.420Z,1520548842.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:42.792Z,1520548842.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:42.808Z,1520548842.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:43.193Z,1520548843.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:43.209Z,1520548843.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:43.586Z,1520548843.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:43.601Z,1520548843.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:43.985Z,1520548843.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:44.000Z,1520548844.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:44.391Z,1520548844.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:44.407Z,1520548844.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:44.790Z,1520548844.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:44.805Z,1520548844.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:45.186Z,1520548845.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:45.201Z,1520548845.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:45.593Z,1520548845.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:45.609Z,1520548845.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:45.993Z,1520548845.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:46.008Z,1520548846.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:46.393Z,1520548846.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:46.408Z,1520548846.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:46.790Z,1520548846.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:46.805Z,1520548846.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:47.191Z,1520548847.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:47.206Z,1520548847.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:47.591Z,1520548847.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:47.607Z,1520548847.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:47.991Z,1520548847.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:48.006Z,1520548848.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:48.391Z,1520548848.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:48.407Z,1520548848.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:48.793Z,1520548848.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:48.808Z,1520548848.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:49.194Z,1520548849.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:49.209Z,1520548849.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:49.587Z,1520548849.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:49.606Z,1520548849.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:49.985Z,1520548849.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:50.001Z,1520548850.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:50.387Z,1520548850.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:50.402Z,1520548850.402 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:50.402Z,1520548850.402 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 298
2018-03-08T22:40:50.402Z,1520548850.402 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T22:40:50.404Z,1520548850.404 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:50.404Z,1520548850.404 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 298
2018-03-08T22:40:50.404Z,1520548850.404 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T22:40:50.406Z,1520548850.406 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:50.406Z,1520548850.406 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 298
2018-03-08T22:40:50.406Z,1520548850.406 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T22:40:50.418Z,1520548850.418 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T22:40:50.418Z,1520548850.418 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T22:40:50.419Z,1520548850.419 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T22:40:50.787Z,1520548850.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:50.812Z,1520548850.812 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T22:40:50.812Z,1520548850.812 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 298
2018-03-08T22:40:50.812Z,1520548850.812 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T22:40:50.813Z,1520548850.813 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 298
2018-03-08T22:40:50.813Z,1520548850.813 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T22:40:50.813Z,1520548850.813 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 298
2018-03-08T22:40:51.185Z,1520548851.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:51.199Z,1520548851.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T22:40:51.199Z,1520548851.199 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:40:51.200Z,1520548851.200 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:40:51.200Z,1520548851.200 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T22:40:51.201Z,1520548851.201 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:40:51.201Z,1520548851.201 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:40:51.201Z,1520548851.201 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T22:40:51.202Z,1520548851.202 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:40:51.202Z,1520548851.202 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:40:51.596Z,1520548851.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:51.611Z,1520548851.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T22:40:51.612Z,1520548851.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:52.001Z,1520548852.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:52.022Z,1520548852.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T22:40:52.023Z,1520548852.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:52.398Z,1520548852.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:52.413Z,1520548852.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T22:40:52.414Z,1520548852.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:52.783Z,1520548852.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:52.805Z,1520548852.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T22:40:52.806Z,1520548852.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:53.186Z,1520548853.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:53.206Z,1520548853.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T22:40:53.207Z,1520548853.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:53.592Z,1520548853.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:53.607Z,1520548853.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T22:40:53.608Z,1520548853.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:53.988Z,1520548853.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:54.003Z,1520548854.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T22:40:54.004Z,1520548854.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:54.395Z,1520548854.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:54.415Z,1520548854.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T22:40:54.416Z,1520548854.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:54.798Z,1520548854.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:54.813Z,1520548854.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T22:40:54.814Z,1520548854.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:55.201Z,1520548855.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:55.215Z,1520548855.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T22:40:55.216Z,1520548855.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:55.590Z,1520548855.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:55.610Z,1520548855.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T22:40:55.611Z,1520548855.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:55.976Z,1520548855.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:56.003Z,1520548856.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T22:40:56.004Z,1520548856.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:56.383Z,1520548856.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:56.408Z,1520548856.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T22:40:56.409Z,1520548856.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:56.796Z,1520548856.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:56.811Z,1520548856.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T22:40:56.812Z,1520548856.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:57.176Z,1520548857.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:57.203Z,1520548857.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T22:40:57.204Z,1520548857.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:57.601Z,1520548857.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:57.616Z,1520548857.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T22:40:57.617Z,1520548857.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:58.001Z,1520548858.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:58.023Z,1520548858.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T22:40:58.024Z,1520548858.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:58.401Z,1520548858.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:58.416Z,1520548858.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T22:40:58.417Z,1520548858.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:58.779Z,1520548858.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:58.810Z,1520548858.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T22:40:58.811Z,1520548858.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:59.179Z,1520548859.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:59.215Z,1520548859.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T22:40:59.215Z,1520548859.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:59.583Z,1520548859.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:40:59.610Z,1520548859.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T22:40:59.611Z,1520548859.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:40:59.986Z,1520548859.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:00.012Z,1520548860.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T22:41:00.013Z,1520548860.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:00.401Z,1520548860.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:00.416Z,1520548860.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T22:41:00.417Z,1520548860.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:00.806Z,1520548860.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:00.821Z,1520548860.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T22:41:00.822Z,1520548860.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:01.201Z,1520548861.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:01.216Z,1520548861.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T22:41:01.217Z,1520548861.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:01.587Z,1520548861.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:01.618Z,1520548861.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T22:41:01.619Z,1520548861.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:01.976Z,1520548861.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:01.999Z,1520548861.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T22:41:02.000Z,1520548862.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:02.383Z,1520548862.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:02.414Z,1520548862.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T22:41:02.415Z,1520548862.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:02.783Z,1520548862.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:02.816Z,1520548862.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T22:41:02.817Z,1520548862.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:03.177Z,1520548863.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:03.191Z,1520548863.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T22:41:03.205Z,1520548863.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:03.594Z,1520548863.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:03.631Z,1520548863.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T22:41:03.632Z,1520548863.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:04.006Z,1520548864.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:04.021Z,1520548864.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T22:41:04.022Z,1520548864.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:04.393Z,1520548864.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:04.421Z,1520548864.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T22:41:04.422Z,1520548864.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:04.787Z,1520548864.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:04.822Z,1520548864.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T22:41:04.823Z,1520548864.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:05.182Z,1520548865.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:05.217Z,1520548865.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T22:41:05.218Z,1520548865.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:05.581Z,1520548865.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:05.631Z,1520548865.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T22:41:05.631Z,1520548865.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:05.983Z,1520548865.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:06.019Z,1520548866.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T22:41:06.020Z,1520548866.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:06.398Z,1520548866.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:06.425Z,1520548866.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T22:41:06.426Z,1520548866.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:06.799Z,1520548866.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:06.851Z,1520548866.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T22:41:06.852Z,1520548866.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:10.734Z,1520548870.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:10.750Z,1520548870.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:10.856Z,1520548870.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:10.890Z,1520548870.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:11.210Z,1520548871.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:11.235Z,1520548871.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:11.603Z,1520548871.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:11.640Z,1520548871.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:12.003Z,1520548872.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:12.027Z,1520548872.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:12.413Z,1520548872.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:12.443Z,1520548872.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:12.817Z,1520548872.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:12.842Z,1520548872.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:13.202Z,1520548873.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:13.217Z,1520548873.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:13.602Z,1520548873.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:13.639Z,1520548873.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:14.001Z,1520548874.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:14.015Z,1520548874.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:14.404Z,1520548874.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:14.419Z,1520548874.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:14.800Z,1520548874.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:14.824Z,1520548874.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:15.217Z,1520548875.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:15.250Z,1520548875.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:15.606Z,1520548875.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:15.621Z,1520548875.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:16.014Z,1520548876.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:16.041Z,1520548876.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:16.404Z,1520548876.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:16.419Z,1520548876.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:16.807Z,1520548876.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:16.830Z,1520548876.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:17.212Z,1520548877.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:17.234Z,1520548877.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:17.612Z,1520548877.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:17.627Z,1520548877.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:18.013Z,1520548878.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:18.029Z,1520548878.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:18.403Z,1520548878.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:18.419Z,1520548878.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:18.804Z,1520548878.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:18.819Z,1520548878.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:19.208Z,1520548879.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:19.236Z,1520548879.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:19.616Z,1520548879.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:19.631Z,1520548879.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:20.018Z,1520548880.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:20.033Z,1520548880.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:20.408Z,1520548880.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:20.423Z,1520548880.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:20.806Z,1520548880.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:20.821Z,1520548880.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:21.217Z,1520548881.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:21.232Z,1520548881.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:21.616Z,1520548881.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:21.639Z,1520548881.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:22.016Z,1520548882.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:22.031Z,1520548882.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:22.408Z,1520548882.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:22.423Z,1520548882.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:22.808Z,1520548882.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:22.823Z,1520548882.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:23.213Z,1520548883.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:23.234Z,1520548883.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:23.617Z,1520548883.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:23.632Z,1520548883.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:24.013Z,1520548884.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:24.028Z,1520548884.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:24.403Z,1520548884.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:24.426Z,1520548884.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:24.803Z,1520548884.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:24.819Z,1520548884.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:25.213Z,1520548885.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:25.228Z,1520548885.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:25.616Z,1520548885.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:25.631Z,1520548885.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:26.017Z,1520548886.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:26.038Z,1520548886.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:26.408Z,1520548886.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:26.423Z,1520548886.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:26.803Z,1520548886.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:26.823Z,1520548886.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:27.216Z,1520548887.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:27.232Z,1520548887.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:27.616Z,1520548887.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:27.631Z,1520548887.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:28.013Z,1520548888.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:28.028Z,1520548888.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:28.409Z,1520548888.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:28.424Z,1520548888.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:28.807Z,1520548888.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:28.822Z,1520548888.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:29.212Z,1520548889.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:29.234Z,1520548889.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:29.617Z,1520548889.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:29.632Z,1520548889.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:30.013Z,1520548890.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:30.034Z,1520548890.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:30.405Z,1520548890.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:30.420Z,1520548890.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:30.803Z,1520548890.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:30.818Z,1520548890.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:31.212Z,1520548891.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:31.228Z,1520548891.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:31.616Z,1520548891.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:31.638Z,1520548891.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:32.017Z,1520548892.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:32.032Z,1520548892.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:32.404Z,1520548892.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:32.419Z,1520548892.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:32.801Z,1520548892.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:32.820Z,1520548892.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:33.216Z,1520548893.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:33.231Z,1520548893.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:33.616Z,1520548893.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:33.639Z,1520548893.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:34.013Z,1520548894.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:34.028Z,1520548894.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:34.405Z,1520548894.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:34.420Z,1520548894.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:34.792Z,1520548894.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:34.827Z,1520548894.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:35.213Z,1520548895.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:35.234Z,1520548895.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:35.616Z,1520548895.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:35.638Z,1520548895.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:36.009Z,1520548896.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:36.025Z,1520548896.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:36.397Z,1520548896.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:36.431Z,1520548896.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:36.796Z,1520548896.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:36.826Z,1520548896.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:37.205Z,1520548897.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:37.236Z,1520548897.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:37.619Z,1520548897.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:37.642Z,1520548897.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:38.021Z,1520548898.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:38.036Z,1520548898.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:38.408Z,1520548898.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:38.423Z,1520548898.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:38.795Z,1520548898.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:38.830Z,1520548898.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:39.221Z,1520548899.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:39.236Z,1520548899.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:39.620Z,1520548899.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:39.635Z,1520548899.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:40.013Z,1520548900.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:40.028Z,1520548900.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:40.395Z,1520548900.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:40.436Z,1520548900.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:40.807Z,1520548900.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:40.826Z,1520548900.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:41.213Z,1520548901.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:41.233Z,1520548901.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:41.618Z,1520548901.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:41.633Z,1520548901.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:42.009Z,1520548902.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:42.032Z,1520548902.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:42.395Z,1520548902.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:42.463Z,1520548902.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:42.795Z,1520548902.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:42.828Z,1520548902.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:43.220Z,1520548903.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:43.281Z,1520548903.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:43.619Z,1520548903.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:43.643Z,1520548903.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:44.015Z,1520548904.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:44.055Z,1520548904.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:44.398Z,1520548904.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:44.440Z,1520548904.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:44.801Z,1520548904.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:44.816Z,1520548904.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:45.214Z,1520548905.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:45.241Z,1520548905.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:45.614Z,1520548905.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:45.638Z,1520548905.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:46.018Z,1520548906.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:46.043Z,1520548906.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:46.407Z,1520548906.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:46.466Z,1520548906.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:46.800Z,1520548906.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:46.827Z,1520548906.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:47.218Z,1520548907.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:47.254Z,1520548907.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:47.609Z,1520548907.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:47.627Z,1520548907.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:48.018Z,1520548908.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:48.056Z,1520548908.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:48.403Z,1520548908.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:48.418Z,1520548908.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:48.808Z,1520548908.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:48.824Z,1520548908.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:49.221Z,1520548909.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:49.253Z,1520548909.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:49.613Z,1520548909.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:49.628Z,1520548909.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:50.013Z,1520548910.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:50.029Z,1520548910.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:50.402Z,1520548910.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:50.429Z,1520548910.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:50.805Z,1520548910.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:50.820Z,1520548910.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:51.218Z,1520548911.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:51.233Z,1520548911.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:51.617Z,1520548911.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:51.632Z,1520548911.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:52.017Z,1520548912.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:52.033Z,1520548912.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:52.405Z,1520548912.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:52.421Z,1520548912.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:52.804Z,1520548912.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:52.820Z,1520548912.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:53.215Z,1520548913.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:53.231Z,1520548913.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:53.660Z,1520548913.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:53.718Z,1520548913.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:54.013Z,1520548914.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:54.034Z,1520548914.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:54.403Z,1520548914.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:54.419Z,1520548914.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:54.803Z,1520548914.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:54.819Z,1520548914.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:55.217Z,1520548915.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:55.232Z,1520548915.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:55.622Z,1520548915.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:55.637Z,1520548915.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:56.016Z,1520548916.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:56.033Z,1520548916.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:56.410Z,1520548916.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:56.426Z,1520548916.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:56.801Z,1520548916.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:56.822Z,1520548916.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:57.214Z,1520548917.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:57.229Z,1520548917.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:57.617Z,1520548917.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:57.632Z,1520548917.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:58.013Z,1520548918.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:58.029Z,1520548918.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:58.408Z,1520548918.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:58.422Z,1520548918.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:58.807Z,1520548918.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:58.826Z,1520548918.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:59.213Z,1520548919.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:59.229Z,1520548919.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:41:59.613Z,1520548919.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:41:59.628Z,1520548919.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:00.016Z,1520548920.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:00.032Z,1520548920.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:00.409Z,1520548920.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:00.424Z,1520548920.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:00.803Z,1520548920.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:00.818Z,1520548920.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:01.210Z,1520548921.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:01.225Z,1520548921.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:01.616Z,1520548921.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:01.638Z,1520548921.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:02.014Z,1520548922.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:02.029Z,1520548922.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:02.409Z,1520548922.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:02.424Z,1520548922.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:02.795Z,1520548922.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:02.826Z,1520548922.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:03.218Z,1520548923.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:03.233Z,1520548923.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:03.620Z,1520548923.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:03.635Z,1520548923.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:04.017Z,1520548924.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:04.032Z,1520548924.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:04.061Z,1520548924.061 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T22:42:04.395Z,1520548924.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:04.423Z,1520548924.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:04.807Z,1520548924.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:04.826Z,1520548924.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:05.217Z,1520548925.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:05.232Z,1520548925.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:05.618Z,1520548925.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:05.633Z,1520548925.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:06.017Z,1520548926.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:06.032Z,1520548926.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:06.407Z,1520548926.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:06.423Z,1520548926.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:06.791Z,1520548926.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:06.823Z,1520548926.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:09.941Z,1520548929.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:09.966Z,1520548929.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:10.089Z,1520548930.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:10.122Z,1520548930.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:10.433Z,1520548930.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:10.462Z,1520548930.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:10.823Z,1520548930.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:10.838Z,1520548930.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:11.207Z,1520548931.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:11.234Z,1520548931.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:11.617Z,1520548931.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:11.637Z,1520548931.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:12.021Z,1520548932.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:12.035Z,1520548932.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:12.429Z,1520548932.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:12.445Z,1520548932.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:12.829Z,1520548932.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:12.844Z,1520548932.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:13.195Z,1520548933.195 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-03-08T22:42:13.195Z,1520548933.195 [DropWeight] Hardware Fault, FailCount= 1
2018-03-08T22:42:13.195Z,1520548933.195 [DropWeight](ERROR): Hardware Fault
2018-03-08T22:42:13.233Z,1520548933.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:13.272Z,1520548933.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:13.283Z,1520548933.283 [CBIT](INFO): Critical error at 20180308T224213
2018-03-08T22:42:13.285Z,1520548933.285 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-03-08T22:42:13.286Z,1520548933.286 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-03-08T22:42:13.622Z,1520548933.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:13.642Z,1520548933.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:13.654Z,1520548933.654 [CBIT](INFO): Critical error at 20180308T224213
2018-03-08T22:42:14.023Z,1520548934.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:14.042Z,1520548934.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:14.423Z,1520548934.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:14.438Z,1520548934.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:14.822Z,1520548934.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:14.842Z,1520548934.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:15.227Z,1520548935.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:15.246Z,1520548935.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:15.628Z,1520548935.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:15.643Z,1520548935.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:16.026Z,1520548936.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:16.053Z,1520548936.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:16.423Z,1520548936.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:16.438Z,1520548936.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:16.824Z,1520548936.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:16.839Z,1520548936.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:17.228Z,1520548937.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:17.244Z,1520548937.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:17.631Z,1520548937.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:17.647Z,1520548937.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:18.033Z,1520548938.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:18.055Z,1520548938.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:18.418Z,1520548938.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:18.433Z,1520548938.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:18.815Z,1520548938.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:18.838Z,1520548938.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:19.229Z,1520548939.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:19.244Z,1520548939.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:19.632Z,1520548939.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:19.647Z,1520548939.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:20.040Z,1520548940.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:20.062Z,1520548940.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:20.415Z,1520548940.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:20.443Z,1520548940.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:20.814Z,1520548940.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:20.846Z,1520548940.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:21.229Z,1520548941.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:21.244Z,1520548941.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:21.633Z,1520548941.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:21.654Z,1520548941.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:22.025Z,1520548942.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:22.055Z,1520548942.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:22.415Z,1520548942.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:22.442Z,1520548942.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:22.811Z,1520548942.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:22.839Z,1520548942.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:23.229Z,1520548943.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:23.245Z,1520548943.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:23.631Z,1520548943.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:23.651Z,1520548943.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:24.025Z,1520548944.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:24.057Z,1520548944.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:24.416Z,1520548944.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:24.446Z,1520548944.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:24.814Z,1520548944.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:24.849Z,1520548944.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:25.226Z,1520548945.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:25.263Z,1520548945.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:25.631Z,1520548945.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:25.655Z,1520548945.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:26.026Z,1520548946.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:26.049Z,1520548946.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:26.414Z,1520548946.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:26.451Z,1520548946.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:26.815Z,1520548946.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:26.835Z,1520548946.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:27.229Z,1520548947.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:27.261Z,1520548947.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:27.629Z,1520548947.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:27.666Z,1520548947.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:28.033Z,1520548948.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:28.058Z,1520548948.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:28.423Z,1520548948.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:28.438Z,1520548948.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:28.816Z,1520548948.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:28.831Z,1520548948.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:29.233Z,1520548949.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:29.264Z,1520548949.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:29.629Z,1520548949.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:29.644Z,1520548949.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:30.033Z,1520548950.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:30.065Z,1520548950.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:30.423Z,1520548950.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:30.442Z,1520548950.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:30.819Z,1520548950.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:30.834Z,1520548950.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:31.237Z,1520548951.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:31.269Z,1520548951.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:31.629Z,1520548951.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:31.644Z,1520548951.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:32.029Z,1520548952.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:32.044Z,1520548952.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:32.425Z,1520548952.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:32.441Z,1520548952.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:32.813Z,1520548952.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:32.833Z,1520548952.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:33.229Z,1520548953.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:33.245Z,1520548953.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:33.629Z,1520548953.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:33.645Z,1520548953.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:34.029Z,1520548954.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:34.044Z,1520548954.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:34.426Z,1520548954.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:34.441Z,1520548954.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:34.824Z,1520548954.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:34.839Z,1520548954.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:35.226Z,1520548955.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:35.241Z,1520548955.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:35.630Z,1520548955.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:35.645Z,1520548955.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:36.029Z,1520548956.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:36.045Z,1520548956.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:36.411Z,1520548956.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:36.434Z,1520548956.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:36.815Z,1520548956.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:36.836Z,1520548956.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:37.230Z,1520548957.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:37.246Z,1520548957.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:37.629Z,1520548957.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:37.645Z,1520548957.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:38.028Z,1520548958.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:38.051Z,1520548958.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:38.423Z,1520548958.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:38.438Z,1520548958.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:38.809Z,1520548958.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:38.832Z,1520548958.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:39.228Z,1520548959.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:39.251Z,1520548959.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:39.629Z,1520548959.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:39.644Z,1520548959.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:40.028Z,1520548960.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:40.043Z,1520548960.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:40.423Z,1520548960.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:40.438Z,1520548960.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:40.819Z,1520548960.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:40.834Z,1520548960.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:41.227Z,1520548961.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:41.243Z,1520548961.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:41.629Z,1520548961.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:41.644Z,1520548961.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:42.025Z,1520548962.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:42.040Z,1520548962.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:42.423Z,1520548962.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:42.438Z,1520548962.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:42.817Z,1520548962.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:42.836Z,1520548962.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:43.229Z,1520548963.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:43.244Z,1520548963.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:43.629Z,1520548963.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:43.645Z,1520548963.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:44.027Z,1520548964.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:44.043Z,1520548964.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:44.424Z,1520548964.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:44.439Z,1520548964.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:44.820Z,1520548964.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:44.835Z,1520548964.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:45.226Z,1520548965.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:45.246Z,1520548965.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:45.628Z,1520548965.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:45.643Z,1520548965.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:46.027Z,1520548966.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:46.050Z,1520548966.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:46.423Z,1520548966.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:46.438Z,1520548966.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:46.823Z,1520548966.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:46.838Z,1520548966.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:47.226Z,1520548967.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:47.246Z,1520548967.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:47.628Z,1520548967.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:47.643Z,1520548967.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:48.028Z,1520548968.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:48.043Z,1520548968.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:48.423Z,1520548968.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:48.438Z,1520548968.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:48.822Z,1520548968.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:48.842Z,1520548968.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:49.227Z,1520548969.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:49.247Z,1520548969.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:49.637Z,1520548969.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:49.652Z,1520548969.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:50.043Z,1520548970.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:50.058Z,1520548970.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:50.416Z,1520548970.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:50.431Z,1520548970.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:50.814Z,1520548970.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:50.834Z,1520548970.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:51.229Z,1520548971.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:51.261Z,1520548971.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:51.625Z,1520548971.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:51.640Z,1520548971.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:52.025Z,1520548972.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:52.041Z,1520548972.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:52.421Z,1520548972.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:52.436Z,1520548972.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:52.819Z,1520548972.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:52.834Z,1520548972.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:53.229Z,1520548973.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:53.261Z,1520548973.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:53.634Z,1520548973.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:53.666Z,1520548973.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:54.021Z,1520548974.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:54.042Z,1520548974.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:54.421Z,1520548974.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:54.436Z,1520548974.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:54.819Z,1520548974.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:54.838Z,1520548974.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:55.233Z,1520548975.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:55.248Z,1520548975.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:55.625Z,1520548975.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:55.641Z,1520548975.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:56.033Z,1520548976.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:56.048Z,1520548976.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:56.423Z,1520548976.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:56.438Z,1520548976.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:56.822Z,1520548976.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:56.838Z,1520548976.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:57.224Z,1520548977.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:57.239Z,1520548977.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:57.629Z,1520548977.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:57.644Z,1520548977.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:58.025Z,1520548978.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:58.041Z,1520548978.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:58.423Z,1520548978.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:58.438Z,1520548978.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:58.822Z,1520548978.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:58.837Z,1520548978.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:59.225Z,1520548979.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:59.241Z,1520548979.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:42:59.625Z,1520548979.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:42:59.640Z,1520548979.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:00.025Z,1520548980.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:00.046Z,1520548980.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:00.422Z,1520548980.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:00.446Z,1520548980.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:00.822Z,1520548980.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:00.837Z,1520548980.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:01.225Z,1520548981.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:01.246Z,1520548981.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:01.625Z,1520548981.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:01.640Z,1520548981.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:02.025Z,1520548982.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:02.041Z,1520548982.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:02.420Z,1520548982.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:02.435Z,1520548982.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:02.822Z,1520548982.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:02.837Z,1520548982.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:03.226Z,1520548983.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:03.241Z,1520548983.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:03.625Z,1520548983.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:03.646Z,1520548983.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:04.026Z,1520548984.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:04.041Z,1520548984.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:04.423Z,1520548984.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:04.442Z,1520548984.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:04.816Z,1520548984.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:04.832Z,1520548984.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:05.226Z,1520548985.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:05.242Z,1520548985.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:05.630Z,1520548985.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:05.645Z,1520548985.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:05.648Z,1520548985.648 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T22:38:05.5Z
2018-03-08T22:43:05.648Z,1520548985.648 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T22:43:05.648Z,1520548985.648 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T22:43:06.029Z,1520548986.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:06.050Z,1520548986.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:06.518Z,1520548986.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:06.534Z,1520548986.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:06.818Z,1520548986.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:06.833Z,1520548986.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:09.929Z,1520548989.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:09.949Z,1520548989.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:10.068Z,1520548990.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:10.103Z,1520548990.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:10.405Z,1520548990.405 [DataOverHttps](INFO): Sending 103 bytes from file Logs/20180308T074127/Courier0348.lzma
2018-03-08T22:43:10.440Z,1520548990.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:10.455Z,1520548990.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:10.836Z,1520548990.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:10.851Z,1520548990.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:11.208Z,1520548991.208 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0348.lzma.bak
2018-03-08T22:43:11.208Z,1520548991.208 [DataOverHttps](INFO): SBD MOMSN=7989754
2018-03-08T22:43:11.244Z,1520548991.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:11.259Z,1520548991.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:12.060Z,1520548992.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:12.085Z,1520548992.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:12.181Z,1520548992.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:12.220Z,1520548992.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:12.547Z,1520548992.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:12.583Z,1520548992.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:15.642Z,1520548995.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:15.657Z,1520548995.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:15.765Z,1520548995.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:15.806Z,1520548995.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:16.149Z,1520548996.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:16.164Z,1520548996.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:16.544Z,1520548996.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:16.559Z,1520548996.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:16.943Z,1520548996.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:16.966Z,1520548996.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:17.345Z,1520548997.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:17.366Z,1520548997.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:17.757Z,1520548997.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:17.795Z,1520548997.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:20.845Z,1520549000.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:20.862Z,1520549000.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:20.969Z,1520549000.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:20.995Z,1520549000.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:21.309Z,1520549001.309 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0349.lzma
2018-03-08T22:43:21.349Z,1520549001.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:21.365Z,1520549001.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:21.722Z,1520549001.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:21.759Z,1520549001.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:22.108Z,1520549002.108 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0349.lzma.bak
2018-03-08T22:43:22.108Z,1520549002.108 [DataOverHttps](INFO): SBD MOMSN=7989758
2018-03-08T22:43:22.154Z,1520549002.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:22.169Z,1520549002.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:22.714Z,1520549002.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:22.729Z,1520549002.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:22.762Z,1520549002.762 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T22:43:22.762Z,1520549002.762 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T22:43:22.762Z,1520549002.762 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T22:43:22.941Z,1520549002.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:22.967Z,1520549002.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:26.061Z,1520549006.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:26.076Z,1520549006.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:26.206Z,1520549006.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:26.254Z,1520549006.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:26.570Z,1520549006.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:26.607Z,1520549006.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:26.966Z,1520549006.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:26.986Z,1520549006.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:27.369Z,1520549007.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:27.384Z,1520549007.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:27.781Z,1520549007.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:27.811Z,1520549007.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:28.182Z,1520549008.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:28.213Z,1520549008.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:28.570Z,1520549008.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:28.585Z,1520549008.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:28.968Z,1520549008.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:28.983Z,1520549008.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:29.368Z,1520549009.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:29.384Z,1520549009.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:29.768Z,1520549009.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:29.784Z,1520549009.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:30.166Z,1520549010.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:30.182Z,1520549010.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:30.569Z,1520549010.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:30.585Z,1520549010.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:30.982Z,1520549010.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:31.012Z,1520549011.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:31.381Z,1520549011.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:31.412Z,1520549011.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:31.768Z,1520549011.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:31.783Z,1520549011.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:32.167Z,1520549012.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:32.201Z,1520549012.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:32.566Z,1520549012.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:32.587Z,1520549012.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:32.967Z,1520549012.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:32.983Z,1520549012.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:33.366Z,1520549013.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:33.383Z,1520549013.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:33.769Z,1520549013.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:33.785Z,1520549013.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:34.173Z,1520549014.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:34.188Z,1520549014.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:34.569Z,1520549014.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:34.585Z,1520549014.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:34.966Z,1520549014.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:34.986Z,1520549014.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:35.366Z,1520549015.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:35.381Z,1520549015.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:35.767Z,1520549015.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:35.782Z,1520549015.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:36.166Z,1520549016.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:36.187Z,1520549016.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:36.569Z,1520549016.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:36.584Z,1520549016.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:36.973Z,1520549016.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:36.988Z,1520549016.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:37.369Z,1520549017.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:37.385Z,1520549017.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:37.771Z,1520549017.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:37.787Z,1520549017.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:38.166Z,1520549018.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:38.187Z,1520549018.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:38.567Z,1520549018.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:38.582Z,1520549018.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:38.967Z,1520549018.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:38.982Z,1520549018.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:39.366Z,1520549019.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:39.386Z,1520549019.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:39.769Z,1520549019.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:39.785Z,1520549019.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:40.168Z,1520549020.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:40.183Z,1520549020.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:40.571Z,1520549020.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:40.619Z,1520549020.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:40.976Z,1520549020.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:40.991Z,1520549020.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:41.374Z,1520549021.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:41.431Z,1520549021.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:41.815Z,1520549021.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:41.835Z,1520549021.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:42.172Z,1520549022.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:42.225Z,1520549022.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:42.573Z,1520549022.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:42.590Z,1520549022.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:42.980Z,1520549022.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:42.999Z,1520549022.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:43.384Z,1520549023.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:43.430Z,1520549023.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:43.762Z,1520549023.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:43.790Z,1520549023.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:44.162Z,1520549024.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:44.178Z,1520549024.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:44.572Z,1520549024.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:44.587Z,1520549024.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:44.956Z,1520549024.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:44.988Z,1520549024.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:45.359Z,1520549025.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:45.398Z,1520549025.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:45.785Z,1520549025.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:45.800Z,1520549025.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:46.178Z,1520549026.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:46.193Z,1520549026.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:46.581Z,1520549026.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:46.597Z,1520549026.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:46.962Z,1520549026.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:46.989Z,1520549026.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:47.351Z,1520549027.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:47.389Z,1520549027.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:47.759Z,1520549027.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:47.786Z,1520549027.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:48.157Z,1520549028.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:48.185Z,1520549028.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:48.582Z,1520549028.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:48.597Z,1520549028.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:48.981Z,1520549028.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:48.997Z,1520549028.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:49.381Z,1520549029.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:49.397Z,1520549029.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:49.758Z,1520549029.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:49.786Z,1520549029.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:50.159Z,1520549030.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:50.186Z,1520549030.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:50.562Z,1520549030.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:50.588Z,1520549030.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:50.959Z,1520549030.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:50.987Z,1520549030.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:51.358Z,1520549031.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:51.385Z,1520549031.385 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:51.385Z,1520549031.385 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 299
2018-03-08T22:43:51.385Z,1520549031.385 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T22:43:51.387Z,1520549031.387 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:51.387Z,1520549031.387 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 299
2018-03-08T22:43:51.387Z,1520549031.387 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T22:43:51.389Z,1520549031.389 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:51.389Z,1520549031.389 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 299
2018-03-08T22:43:51.389Z,1520549031.389 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T22:43:51.401Z,1520549031.401 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T22:43:51.401Z,1520549031.401 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T22:43:51.401Z,1520549031.401 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T22:43:51.785Z,1520549031.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:51.824Z,1520549031.824 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T22:43:51.825Z,1520549031.825 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 299
2018-03-08T22:43:51.825Z,1520549031.825 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T22:43:51.825Z,1520549031.825 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 299
2018-03-08T22:43:51.826Z,1520549031.826 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T22:43:51.826Z,1520549031.826 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 299
2018-03-08T22:43:52.181Z,1520549032.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:52.238Z,1520549032.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T22:43:52.239Z,1520549032.239 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:43:52.239Z,1520549032.239 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:43:52.240Z,1520549032.240 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T22:43:52.240Z,1520549032.240 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:43:52.240Z,1520549032.240 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:43:52.241Z,1520549032.241 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T22:43:52.241Z,1520549032.241 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:43:52.241Z,1520549032.241 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:43:52.571Z,1520549032.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:52.606Z,1520549032.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T22:43:52.607Z,1520549032.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:52.964Z,1520549032.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:52.979Z,1520549032.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T22:43:52.980Z,1520549032.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:53.362Z,1520549033.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:53.377Z,1520549033.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T22:43:53.378Z,1520549033.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:53.761Z,1520549033.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:53.777Z,1520549033.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T22:43:53.778Z,1520549033.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:54.166Z,1520549034.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:54.187Z,1520549034.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T22:43:54.188Z,1520549034.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:54.577Z,1520549034.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:54.592Z,1520549034.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T22:43:54.613Z,1520549034.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:54.969Z,1520549034.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:54.990Z,1520549034.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T22:43:54.991Z,1520549034.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:55.369Z,1520549035.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:55.384Z,1520549035.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T22:43:55.385Z,1520549035.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:55.760Z,1520549035.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:55.775Z,1520549035.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T22:43:55.776Z,1520549035.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:56.167Z,1520549036.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:56.183Z,1520549036.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T22:43:56.184Z,1520549036.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:56.569Z,1520549036.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:56.590Z,1520549036.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T22:43:56.591Z,1520549036.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:56.969Z,1520549036.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:56.984Z,1520549036.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T22:43:56.985Z,1520549036.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:57.367Z,1520549037.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:57.386Z,1520549037.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T22:43:57.387Z,1520549037.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:57.773Z,1520549037.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:57.788Z,1520549037.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T22:43:57.789Z,1520549037.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:58.173Z,1520549038.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:58.188Z,1520549038.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T22:43:58.189Z,1520549038.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:58.572Z,1520549038.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:58.594Z,1520549038.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T22:43:58.595Z,1520549038.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:58.966Z,1520549038.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:58.987Z,1520549038.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T22:43:58.987Z,1520549038.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:59.367Z,1520549039.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:59.382Z,1520549039.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T22:43:59.383Z,1520549039.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:43:59.769Z,1520549039.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:43:59.784Z,1520549039.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T22:43:59.785Z,1520549039.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:00.166Z,1520549040.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:00.187Z,1520549040.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T22:44:00.187Z,1520549040.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:00.573Z,1520549040.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:00.594Z,1520549040.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T22:44:00.595Z,1520549040.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:00.977Z,1520549040.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:00.992Z,1520549040.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T22:44:00.994Z,1520549040.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:01.374Z,1520549041.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:01.389Z,1520549041.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T22:44:01.389Z,1520549041.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:01.768Z,1520549041.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:01.783Z,1520549041.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T22:44:01.784Z,1520549041.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:02.166Z,1520549042.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:02.186Z,1520549042.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T22:44:02.187Z,1520549042.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:02.571Z,1520549042.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:02.586Z,1520549042.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T22:44:02.587Z,1520549042.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:02.973Z,1520549042.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:02.988Z,1520549042.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T22:44:02.989Z,1520549042.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:03.367Z,1520549043.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:03.382Z,1520549043.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T22:44:03.383Z,1520549043.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:03.774Z,1520549043.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:03.789Z,1520549043.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T22:44:03.790Z,1520549043.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:04.174Z,1520549044.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:04.189Z,1520549044.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T22:44:04.189Z,1520549044.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:04.573Z,1520549044.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:04.588Z,1520549044.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T22:44:04.589Z,1520549044.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:04.967Z,1520549044.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:04.986Z,1520549044.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T22:44:04.987Z,1520549044.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:05.365Z,1520549045.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:05.380Z,1520549045.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T22:44:05.381Z,1520549045.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:05.769Z,1520549045.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:05.790Z,1520549045.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T22:44:05.791Z,1520549045.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:06.169Z,1520549046.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:06.185Z,1520549046.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T22:44:06.186Z,1520549046.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:06.574Z,1520549046.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:06.594Z,1520549046.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T22:44:06.595Z,1520549046.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:06.970Z,1520549046.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:06.990Z,1520549046.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T22:44:06.991Z,1520549046.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:07.374Z,1520549047.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:07.389Z,1520549047.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T22:44:07.390Z,1520549047.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:07.767Z,1520549047.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:07.783Z,1520549047.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T22:44:07.784Z,1520549047.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:08.156Z,1520549048.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:08.187Z,1520549048.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T22:44:08.188Z,1520549048.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:08.566Z,1520549048.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:08.590Z,1520549048.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T22:44:08.591Z,1520549048.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:08.972Z,1520549048.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:08.987Z,1520549048.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T22:44:08.988Z,1520549048.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:09.357Z,1520549049.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:09.375Z,1520549049.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T22:44:09.377Z,1520549049.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:09.773Z,1520549049.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:09.788Z,1520549049.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T22:44:09.790Z,1520549049.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:10.173Z,1520549050.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:10.188Z,1520549050.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T22:44:10.189Z,1520549050.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:10.572Z,1520549050.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:10.587Z,1520549050.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T22:44:10.588Z,1520549050.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:10.966Z,1520549050.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:10.982Z,1520549050.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T22:44:10.983Z,1520549050.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:11.368Z,1520549051.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:11.383Z,1520549051.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T22:44:11.384Z,1520549051.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:11.768Z,1520549051.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:11.790Z,1520549051.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:12.167Z,1520549052.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:12.183Z,1520549052.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:12.573Z,1520549052.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:12.594Z,1520549052.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:12.969Z,1520549052.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:12.990Z,1520549052.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:13.372Z,1520549053.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:13.394Z,1520549053.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:13.771Z,1520549053.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:13.786Z,1520549053.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:14.161Z,1520549054.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:14.177Z,1520549054.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:14.570Z,1520549054.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:14.590Z,1520549054.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:14.969Z,1520549054.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:14.984Z,1520549054.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:15.352Z,1520549055.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:15.382Z,1520549055.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:15.776Z,1520549055.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:15.791Z,1520549055.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:16.177Z,1520549056.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:16.192Z,1520549056.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:16.573Z,1520549056.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:16.588Z,1520549056.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:16.961Z,1520549056.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:16.976Z,1520549056.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:17.358Z,1520549057.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:17.373Z,1520549057.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:17.758Z,1520549057.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:17.857Z,1520549057.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:18.158Z,1520549058.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:18.179Z,1520549058.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:18.565Z,1520549058.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:18.586Z,1520549058.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:18.965Z,1520549058.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:18.981Z,1520549058.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:19.369Z,1520549059.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:19.390Z,1520549059.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:19.752Z,1520549059.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:19.767Z,1520549059.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:20.148Z,1520549060.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:20.164Z,1520549060.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:20.646Z,1520549060.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:20.661Z,1520549060.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:20.959Z,1520549060.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:20.974Z,1520549060.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:21.361Z,1520549061.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:21.377Z,1520549061.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:21.778Z,1520549061.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:21.801Z,1520549061.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:22.165Z,1520549062.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:22.206Z,1520549062.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:22.557Z,1520549062.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:22.585Z,1520549062.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:22.969Z,1520549062.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:22.985Z,1520549062.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:23.371Z,1520549063.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:23.386Z,1520549063.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:26.473Z,1520549066.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:26.490Z,1520549066.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:26.606Z,1520549066.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:26.643Z,1520549066.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:26.973Z,1520549066.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:26.999Z,1520549066.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:27.364Z,1520549067.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:27.391Z,1520549067.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:27.770Z,1520549067.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:27.798Z,1520549067.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:28.166Z,1520549068.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:28.181Z,1520549068.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:28.565Z,1520549068.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:28.581Z,1520549068.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:28.981Z,1520549068.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:29.005Z,1520549069.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:29.377Z,1520549069.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:29.408Z,1520549069.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:29.766Z,1520549069.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:29.806Z,1520549069.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:30.164Z,1520549070.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:30.180Z,1520549070.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:30.569Z,1520549070.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:30.590Z,1520549070.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:31.009Z,1520549071.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:31.024Z,1520549071.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:31.364Z,1520549071.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:31.379Z,1520549071.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:31.781Z,1520549071.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:31.811Z,1520549071.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:32.169Z,1520549072.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:32.212Z,1520549072.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:32.577Z,1520549072.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:32.605Z,1520549072.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:32.968Z,1520549072.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:32.990Z,1520549072.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:33.361Z,1520549073.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:33.377Z,1520549073.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:33.774Z,1520549073.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:33.789Z,1520549073.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:34.168Z,1520549074.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:34.184Z,1520549074.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:34.570Z,1520549074.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:34.586Z,1520549074.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:34.981Z,1520549074.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:35.013Z,1520549075.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:35.374Z,1520549075.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:35.389Z,1520549075.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:35.762Z,1520549075.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:35.784Z,1520549075.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:36.171Z,1520549076.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:36.190Z,1520549076.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:36.572Z,1520549076.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:36.588Z,1520549076.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:36.968Z,1520549076.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:36.985Z,1520549076.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:37.371Z,1520549077.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:37.387Z,1520549077.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:37.773Z,1520549077.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:37.789Z,1520549077.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:38.182Z,1520549078.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:38.218Z,1520549078.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:38.574Z,1520549078.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:38.589Z,1520549078.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:38.971Z,1520549078.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:38.986Z,1520549078.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:39.371Z,1520549079.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:39.386Z,1520549079.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:39.770Z,1520549079.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:39.790Z,1520549079.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:40.174Z,1520549080.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:40.189Z,1520549080.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:40.571Z,1520549080.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:40.587Z,1520549080.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:40.972Z,1520549080.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:40.988Z,1520549080.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:41.377Z,1520549081.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:41.393Z,1520549081.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:41.774Z,1520549081.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:41.789Z,1520549081.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:42.168Z,1520549082.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:42.184Z,1520549082.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:42.572Z,1520549082.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:42.594Z,1520549082.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:42.968Z,1520549082.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:43.000Z,1520549083.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:43.370Z,1520549083.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:43.391Z,1520549083.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:43.774Z,1520549083.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:43.794Z,1520549083.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:44.182Z,1520549084.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:44.218Z,1520549084.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:44.574Z,1520549084.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:44.589Z,1520549084.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:44.969Z,1520549084.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:44.990Z,1520549084.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:45.372Z,1520549085.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:45.387Z,1520549085.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:45.764Z,1520549085.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:45.788Z,1520549085.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:46.173Z,1520549086.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:46.191Z,1520549086.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:46.569Z,1520549086.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:46.587Z,1520549086.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:46.976Z,1520549086.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:46.993Z,1520549086.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:47.377Z,1520549087.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:47.393Z,1520549087.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:47.776Z,1520549087.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:47.791Z,1520549087.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:48.166Z,1520549088.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:48.182Z,1520549088.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:48.568Z,1520549088.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:48.583Z,1520549088.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:48.974Z,1520549088.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:48.990Z,1520549088.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:49.370Z,1520549089.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:49.385Z,1520549089.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:49.778Z,1520549089.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:49.793Z,1520549089.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:50.178Z,1520549090.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:50.193Z,1520549090.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:50.576Z,1520549090.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:50.599Z,1520549090.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:50.972Z,1520549090.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:50.987Z,1520549090.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:51.370Z,1520549091.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:51.390Z,1520549091.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:51.766Z,1520549091.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:51.782Z,1520549091.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:52.167Z,1520549092.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:52.187Z,1520549092.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:52.570Z,1520549092.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:52.590Z,1520549092.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:52.976Z,1520549092.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:52.992Z,1520549092.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:53.377Z,1520549093.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:53.392Z,1520549093.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:53.777Z,1520549093.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:53.793Z,1520549093.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:54.170Z,1520549094.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:54.186Z,1520549094.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:54.568Z,1520549094.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:54.583Z,1520549094.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:54.972Z,1520549094.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:54.988Z,1520549094.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:55.370Z,1520549095.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:55.385Z,1520549095.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:55.778Z,1520549095.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:55.799Z,1520549095.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:56.178Z,1520549096.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:56.193Z,1520549096.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:56.576Z,1520549096.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:56.591Z,1520549096.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:56.971Z,1520549096.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:56.994Z,1520549096.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:57.370Z,1520549097.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:57.390Z,1520549097.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:57.772Z,1520549097.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:57.788Z,1520549097.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:58.167Z,1520549098.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:58.183Z,1520549098.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:58.576Z,1520549098.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:58.592Z,1520549098.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:58.977Z,1520549098.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:58.993Z,1520549098.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:59.377Z,1520549099.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:59.392Z,1520549099.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:44:59.770Z,1520549099.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:44:59.791Z,1520549099.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:00.170Z,1520549100.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:00.186Z,1520549100.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:00.571Z,1520549100.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:00.599Z,1520549100.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:00.975Z,1520549100.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:00.991Z,1520549100.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:01.370Z,1520549101.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:01.386Z,1520549101.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:01.777Z,1520549101.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:01.799Z,1520549101.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:02.178Z,1520549102.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:02.193Z,1520549102.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:02.576Z,1520549102.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:02.592Z,1520549102.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:02.971Z,1520549102.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:02.994Z,1520549102.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:03.371Z,1520549103.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:03.390Z,1520549103.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:03.772Z,1520549103.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:03.787Z,1520549103.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:04.167Z,1520549104.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:04.183Z,1520549104.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:04.576Z,1520549104.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:04.592Z,1520549104.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:04.976Z,1520549104.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:04.991Z,1520549104.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:05.378Z,1520549105.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:05.393Z,1520549105.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:05.770Z,1520549105.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:05.790Z,1520549105.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:06.170Z,1520549106.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:06.186Z,1520549106.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:06.566Z,1520549106.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:06.586Z,1520549106.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:06.968Z,1520549106.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:06.990Z,1520549106.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:07.370Z,1520549107.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:07.386Z,1520549107.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:07.777Z,1520549107.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:07.792Z,1520549107.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:08.178Z,1520549108.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:08.193Z,1520549108.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:08.576Z,1520549108.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:08.591Z,1520549108.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:08.971Z,1520549108.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:08.994Z,1520549108.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:09.361Z,1520549109.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:09.382Z,1520549109.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:09.775Z,1520549109.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:09.790Z,1520549109.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:10.173Z,1520549110.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:10.189Z,1520549110.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:10.576Z,1520549110.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:10.592Z,1520549110.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:10.977Z,1520549110.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:10.992Z,1520549110.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:11.377Z,1520549111.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:11.392Z,1520549111.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:11.771Z,1520549111.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:11.790Z,1520549111.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:12.170Z,1520549112.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:12.187Z,1520549112.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:12.568Z,1520549112.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:12.591Z,1520549112.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:12.973Z,1520549112.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:12.988Z,1520549112.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:13.367Z,1520549113.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:13.383Z,1520549113.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:13.778Z,1520549113.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:13.793Z,1520549113.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:14.178Z,1520549114.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:14.193Z,1520549114.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:14.577Z,1520549114.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:14.598Z,1520549114.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:14.973Z,1520549114.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:14.989Z,1520549114.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:15.371Z,1520549115.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:15.390Z,1520549115.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:15.770Z,1520549115.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:15.794Z,1520549115.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:16.167Z,1520549116.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:16.189Z,1520549116.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:16.566Z,1520549116.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:16.583Z,1520549116.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:16.977Z,1520549116.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:16.994Z,1520549116.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:17.377Z,1520549117.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:17.393Z,1520549117.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:17.772Z,1520549117.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:17.796Z,1520549117.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:18.170Z,1520549118.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:18.186Z,1520549118.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:18.567Z,1520549118.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:18.583Z,1520549118.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:18.968Z,1520549118.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:18.991Z,1520549118.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:19.367Z,1520549119.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:19.383Z,1520549119.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:19.774Z,1520549119.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:19.797Z,1520549119.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:20.184Z,1520549120.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:20.200Z,1520549120.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:20.582Z,1520549120.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:20.597Z,1520549120.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:20.959Z,1520549120.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:20.987Z,1520549120.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:21.363Z,1520549121.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:21.391Z,1520549121.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:21.759Z,1520549121.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:21.794Z,1520549121.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:22.164Z,1520549122.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:22.201Z,1520549122.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:22.563Z,1520549122.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:22.591Z,1520549122.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:22.978Z,1520549122.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:22.998Z,1520549122.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:23.383Z,1520549123.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:23.398Z,1520549123.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:26.882Z,1520549126.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:26.898Z,1520549126.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:27.003Z,1520549127.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:27.038Z,1520549127.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:27.358Z,1520549127.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:27.391Z,1520549127.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:27.747Z,1520549127.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:27.762Z,1520549127.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:28.149Z,1520549128.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:28.164Z,1520549128.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:28.564Z,1520549128.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:28.579Z,1520549128.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:28.965Z,1520549128.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:28.980Z,1520549128.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:29.361Z,1520549129.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:29.376Z,1520549129.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:29.761Z,1520549129.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:29.776Z,1520549129.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:30.152Z,1520549130.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:30.167Z,1520549130.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:30.551Z,1520549130.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:30.571Z,1520549130.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:30.958Z,1520549130.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:30.973Z,1520549130.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:31.351Z,1520549131.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:31.367Z,1520549131.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:31.765Z,1520549131.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:31.780Z,1520549131.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:32.165Z,1520549132.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:32.181Z,1520549132.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:32.561Z,1520549132.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:32.575Z,1520549132.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:32.952Z,1520549132.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:32.967Z,1520549132.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:33.351Z,1520549133.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:33.374Z,1520549133.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:33.760Z,1520549133.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:33.775Z,1520549133.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:34.154Z,1520549134.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:34.174Z,1520549134.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:34.553Z,1520549134.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:34.573Z,1520549134.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:34.965Z,1520549134.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:34.980Z,1520549134.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:35.361Z,1520549135.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:35.376Z,1520549135.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:35.764Z,1520549135.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:35.779Z,1520549135.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:36.160Z,1520549136.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:36.176Z,1520549136.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:36.541Z,1520549136.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:36.575Z,1520549136.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:36.961Z,1520549136.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:36.976Z,1520549136.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:37.360Z,1520549137.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:37.375Z,1520549137.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:37.734Z,1520549137.734 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T22:45:37.734Z,1520549137.734 [NAL9602] Data Fault, FailCount= 3
2018-03-08T22:45:37.734Z,1520549137.734 [NAL9602](ERROR): Data Fault
2018-03-08T22:45:37.768Z,1520549137.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:37.787Z,1520549137.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:37.817Z,1520549137.817 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T22:45:38.130Z,1520549138.130 [NAL9602](INFO): Powering down
2018-03-08T22:45:38.155Z,1520549138.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:38.183Z,1520549138.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:38.558Z,1520549138.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:38.573Z,1520549138.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:38.953Z,1520549138.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:38.971Z,1520549138.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:38.985Z,1520549138.985 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T22:45:38.985Z,1520549138.985 [NAL9602] No Fault, FailCount= 3
2018-03-08T22:45:39.351Z,1520549139.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:39.373Z,1520549139.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:39.742Z,1520549139.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:39.777Z,1520549139.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:40.144Z,1520549140.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:40.170Z,1520549140.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:40.551Z,1520549140.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:40.573Z,1520549140.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:40.941Z,1520549140.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:40.977Z,1520549140.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:41.340Z,1520549141.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:41.367Z,1520549141.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:41.760Z,1520549141.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:41.775Z,1520549141.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:42.146Z,1520549142.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:42.173Z,1520549142.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:42.568Z,1520549142.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:42.596Z,1520549142.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:42.949Z,1520549142.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:42.994Z,1520549142.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:43.347Z,1520549143.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:43.406Z,1520549143.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:43.747Z,1520549143.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:43.796Z,1520549143.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:44.147Z,1520549144.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:44.183Z,1520549144.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:44.575Z,1520549144.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:44.590Z,1520549144.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:44.946Z,1520549144.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:44.978Z,1520549144.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:45.347Z,1520549145.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:45.382Z,1520549145.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:45.748Z,1520549145.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:45.795Z,1520549145.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:46.153Z,1520549146.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:46.177Z,1520549146.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:46.554Z,1520549146.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:46.589Z,1520549146.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:46.948Z,1520549146.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:46.962Z,1520549146.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:47.348Z,1520549147.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:47.363Z,1520549147.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:47.750Z,1520549147.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:47.770Z,1520549147.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:48.154Z,1520549148.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:48.169Z,1520549148.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:48.552Z,1520549148.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:48.571Z,1520549148.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:48.956Z,1520549148.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:48.971Z,1520549148.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:49.354Z,1520549149.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:49.369Z,1520549149.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:49.751Z,1520549149.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:49.778Z,1520549149.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:50.153Z,1520549150.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:50.174Z,1520549150.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:50.558Z,1520549150.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:50.578Z,1520549150.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:50.951Z,1520549150.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:50.967Z,1520549150.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:51.353Z,1520549151.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:51.377Z,1520549151.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:51.750Z,1520549151.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:51.778Z,1520549151.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:52.144Z,1520549152.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:52.171Z,1520549152.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:52.550Z,1520549152.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:52.577Z,1520549152.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:52.943Z,1520549152.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:52.979Z,1520549152.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:53.340Z,1520549153.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:53.356Z,1520549153.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:53.747Z,1520549153.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:53.778Z,1520549153.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:54.150Z,1520549154.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:54.186Z,1520549154.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:54.544Z,1520549154.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:54.559Z,1520549154.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:54.953Z,1520549154.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:54.968Z,1520549154.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:55.350Z,1520549155.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:55.366Z,1520549155.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:55.748Z,1520549155.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:55.764Z,1520549155.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:56.150Z,1520549156.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:56.170Z,1520549156.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:56.550Z,1520549156.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:56.565Z,1520549156.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:56.946Z,1520549156.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:56.974Z,1520549156.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:57.356Z,1520549157.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:57.378Z,1520549157.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:57.756Z,1520549157.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:57.771Z,1520549157.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:58.145Z,1520549158.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:58.164Z,1520549158.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:58.559Z,1520549158.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:58.574Z,1520549158.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:58.955Z,1520549158.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:58.978Z,1520549158.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:59.354Z,1520549159.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:59.369Z,1520549159.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:45:59.758Z,1520549159.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:45:59.778Z,1520549159.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:00.159Z,1520549160.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:00.175Z,1520549160.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:00.540Z,1520549160.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:00.572Z,1520549160.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:00.957Z,1520549160.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:00.973Z,1520549160.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:01.353Z,1520549161.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:01.378Z,1520549161.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:01.759Z,1520549161.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:01.774Z,1520549161.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:02.154Z,1520549162.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:02.170Z,1520549162.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:02.554Z,1520549162.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:02.570Z,1520549162.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:02.949Z,1520549162.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:02.973Z,1520549162.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:03.354Z,1520549163.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:03.375Z,1520549163.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:03.753Z,1520549163.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:03.782Z,1520549163.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:04.144Z,1520549164.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:04.170Z,1520549164.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:04.554Z,1520549164.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:04.574Z,1520549164.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:04.942Z,1520549164.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:04.970Z,1520549164.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:05.344Z,1520549165.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:05.380Z,1520549165.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:05.746Z,1520549165.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:05.772Z,1520549165.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:06.146Z,1520549166.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:06.177Z,1520549166.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:06.544Z,1520549166.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:06.579Z,1520549166.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:06.946Z,1520549166.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:06.995Z,1520549166.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:07.346Z,1520549167.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:07.390Z,1520549167.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:07.747Z,1520549167.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:07.762Z,1520549167.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:08.135Z,1520549168.135 [NAL9602](INFO): Powering up NAL9602
2018-03-08T22:46:08.153Z,1520549168.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:08.190Z,1520549168.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:08.550Z,1520549168.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:08.565Z,1520549168.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:08.946Z,1520549168.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:08.962Z,1520549168.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:09.346Z,1520549169.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:09.361Z,1520549169.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:09.803Z,1520549169.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:09.840Z,1520549169.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:10.152Z,1520549170.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:10.167Z,1520549170.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:10.550Z,1520549170.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:10.565Z,1520549170.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:10.947Z,1520549170.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:10.961Z,1520549170.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:11.347Z,1520549171.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:11.362Z,1520549171.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:11.750Z,1520549171.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:11.766Z,1520549171.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:12.147Z,1520549172.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:12.183Z,1520549172.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:12.549Z,1520549172.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:12.564Z,1520549172.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:12.954Z,1520549172.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:12.974Z,1520549172.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:13.358Z,1520549173.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:13.373Z,1520549173.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:13.758Z,1520549173.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:13.773Z,1520549173.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:14.158Z,1520549174.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:14.172Z,1520549174.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:14.559Z,1520549174.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:14.574Z,1520549174.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:14.947Z,1520549174.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:14.963Z,1520549174.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:15.354Z,1520549175.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:15.369Z,1520549175.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:15.758Z,1520549175.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:15.773Z,1520549175.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:16.151Z,1520549176.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:16.167Z,1520549176.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:16.558Z,1520549176.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:16.573Z,1520549176.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:16.958Z,1520549176.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:16.973Z,1520549176.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:17.351Z,1520549177.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:17.366Z,1520549177.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:17.758Z,1520549177.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:17.773Z,1520549177.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:18.158Z,1520549178.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:18.173Z,1520549178.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:18.552Z,1520549178.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:18.569Z,1520549178.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:18.961Z,1520549178.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:18.976Z,1520549178.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:19.334Z,1520549179.334 [NAL9602](INFO): NAL9602 initialized
2018-03-08T22:46:19.363Z,1520549179.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:19.379Z,1520549179.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:19.748Z,1520549179.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:19.771Z,1520549179.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:20.165Z,1520549180.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:20.180Z,1520549180.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:20.561Z,1520549180.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:20.577Z,1520549180.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:20.960Z,1520549180.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:20.975Z,1520549180.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:21.360Z,1520549181.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:21.375Z,1520549181.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:21.757Z,1520549181.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:21.772Z,1520549181.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:22.152Z,1520549182.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:22.167Z,1520549182.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:22.559Z,1520549182.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:22.574Z,1520549182.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:22.965Z,1520549182.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:22.981Z,1520549182.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:23.365Z,1520549183.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:23.381Z,1520549183.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:23.765Z,1520549183.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:23.786Z,1520549183.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:26.858Z,1520549186.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:26.874Z,1520549186.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:26.980Z,1520549186.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:27.014Z,1520549187.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:27.368Z,1520549187.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:27.383Z,1520549187.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:27.766Z,1520549187.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:27.787Z,1520549187.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:28.158Z,1520549188.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:28.187Z,1520549188.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:28.543Z,1520549188.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:28.570Z,1520549188.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:28.945Z,1520549188.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:28.981Z,1520549188.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:29.343Z,1520549189.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:29.370Z,1520549189.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:29.762Z,1520549189.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:29.783Z,1520549189.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:30.172Z,1520549190.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:30.187Z,1520549190.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:30.566Z,1520549190.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:30.587Z,1520549190.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:30.948Z,1520549190.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:30.980Z,1520549190.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:31.347Z,1520549191.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:31.376Z,1520549191.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:31.740Z,1520549191.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:31.775Z,1520549191.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:32.143Z,1520549192.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:32.169Z,1520549192.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:32.557Z,1520549192.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:32.582Z,1520549192.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:32.966Z,1520549192.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:32.982Z,1520549192.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:33.362Z,1520549193.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:33.377Z,1520549193.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:33.743Z,1520549193.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:33.783Z,1520549193.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:34.148Z,1520549194.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:34.174Z,1520549194.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:34.543Z,1520549194.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:34.575Z,1520549194.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:34.967Z,1520549194.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:34.983Z,1520549194.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:35.365Z,1520549195.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:35.383Z,1520549195.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:35.767Z,1520549195.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:35.782Z,1520549195.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:36.144Z,1520549196.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:36.171Z,1520549196.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:36.543Z,1520549196.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:36.559Z,1520549196.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:36.949Z,1520549196.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:36.964Z,1520549196.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:37.352Z,1520549197.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:37.390Z,1520549197.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:37.765Z,1520549197.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:37.798Z,1520549197.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:38.162Z,1520549198.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:38.198Z,1520549198.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:38.562Z,1520549198.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:38.594Z,1520549198.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:38.952Z,1520549198.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:38.968Z,1520549198.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:39.348Z,1520549199.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:39.364Z,1520549199.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:39.753Z,1520549199.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:39.770Z,1520549199.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:40.152Z,1520549200.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:40.168Z,1520549200.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:40.565Z,1520549200.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:40.596Z,1520549200.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:40.961Z,1520549200.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:40.985Z,1520549200.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:41.365Z,1520549201.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:41.401Z,1520549201.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:41.751Z,1520549201.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:41.766Z,1520549201.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:42.151Z,1520549202.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:42.166Z,1520549202.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:42.554Z,1520549202.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:42.569Z,1520549202.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:42.953Z,1520549202.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:42.969Z,1520549202.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:43.352Z,1520549203.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:43.367Z,1520549203.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:43.765Z,1520549203.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:43.780Z,1520549203.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:44.157Z,1520549204.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:44.172Z,1520549204.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:44.562Z,1520549204.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:44.577Z,1520549204.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:44.955Z,1520549204.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:44.970Z,1520549204.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:45.351Z,1520549205.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:45.371Z,1520549205.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:45.753Z,1520549205.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:45.767Z,1520549205.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:46.151Z,1520549206.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:46.166Z,1520549206.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:46.560Z,1520549206.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:46.583Z,1520549206.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:46.961Z,1520549206.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:46.976Z,1520549206.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:47.361Z,1520549207.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:47.376Z,1520549207.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:47.755Z,1520549207.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:47.770Z,1520549207.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:48.155Z,1520549208.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:48.170Z,1520549208.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:48.555Z,1520549208.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:48.570Z,1520549208.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:48.956Z,1520549208.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:48.971Z,1520549208.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:49.357Z,1520549209.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:49.372Z,1520549209.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:49.760Z,1520549209.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:49.776Z,1520549209.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:50.160Z,1520549210.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:50.175Z,1520549210.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:50.561Z,1520549210.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:50.576Z,1520549210.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:50.955Z,1520549210.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:50.970Z,1520549210.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:51.355Z,1520549211.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:51.371Z,1520549211.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:51.752Z,1520549211.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:51.767Z,1520549211.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:52.145Z,1520549212.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:52.179Z,1520549212.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:52.565Z,1520549212.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:52.581Z,1520549212.581 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:52.581Z,1520549212.581 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 300
2018-03-08T22:46:52.581Z,1520549212.581 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T22:46:52.583Z,1520549212.583 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:52.583Z,1520549212.583 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 300
2018-03-08T22:46:52.583Z,1520549212.583 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T22:46:52.585Z,1520549212.585 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:52.585Z,1520549212.585 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 300
2018-03-08T22:46:52.585Z,1520549212.585 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T22:46:52.597Z,1520549212.597 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T22:46:52.597Z,1520549212.597 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T22:46:52.597Z,1520549212.597 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T22:46:52.965Z,1520549212.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:52.991Z,1520549212.991 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T22:46:52.991Z,1520549212.991 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 300
2018-03-08T22:46:52.991Z,1520549212.991 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T22:46:52.991Z,1520549212.991 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 300
2018-03-08T22:46:52.992Z,1520549212.992 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T22:46:52.992Z,1520549212.992 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 300
2018-03-08T22:46:53.349Z,1520549213.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:53.383Z,1520549213.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T22:46:53.383Z,1520549213.383 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:46:53.384Z,1520549213.384 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:46:53.384Z,1520549213.384 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T22:46:53.385Z,1520549213.385 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:46:53.385Z,1520549213.385 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:46:53.385Z,1520549213.385 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T22:46:53.386Z,1520549213.386 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:46:53.386Z,1520549213.386 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:46:53.743Z,1520549213.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:53.778Z,1520549213.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T22:46:53.779Z,1520549213.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:54.143Z,1520549214.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:54.179Z,1520549214.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T22:46:54.180Z,1520549214.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:54.543Z,1520549214.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:54.579Z,1520549214.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T22:46:54.580Z,1520549214.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:54.948Z,1520549214.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:54.986Z,1520549214.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T22:46:54.987Z,1520549214.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:55.346Z,1520549215.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:55.361Z,1520549215.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T22:46:55.362Z,1520549215.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:55.757Z,1520549215.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:55.783Z,1520549215.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T22:46:55.784Z,1520549215.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:56.174Z,1520549216.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:56.189Z,1520549216.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T22:46:56.190Z,1520549216.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:56.553Z,1520549216.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:56.591Z,1520549216.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T22:46:56.592Z,1520549216.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:56.947Z,1520549216.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:56.962Z,1520549216.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T22:46:56.963Z,1520549216.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:57.351Z,1520549217.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:57.386Z,1520549217.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T22:46:57.387Z,1520549217.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:57.748Z,1520549217.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:57.762Z,1520549217.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T22:46:57.763Z,1520549217.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:58.151Z,1520549218.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:58.166Z,1520549218.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T22:46:58.167Z,1520549218.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:58.557Z,1520549218.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:58.572Z,1520549218.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T22:46:58.573Z,1520549218.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:58.965Z,1520549218.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:58.979Z,1520549218.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T22:46:59.004Z,1520549219.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:59.357Z,1520549219.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:59.378Z,1520549219.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T22:46:59.379Z,1520549219.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:46:59.754Z,1520549219.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:46:59.769Z,1520549219.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T22:46:59.770Z,1520549219.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:00.154Z,1520549220.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:00.169Z,1520549220.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T22:47:00.170Z,1520549220.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:00.551Z,1520549220.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:00.566Z,1520549220.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T22:47:00.567Z,1520549220.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:00.951Z,1520549220.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:00.981Z,1520549220.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T22:47:00.982Z,1520549220.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:01.354Z,1520549221.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:01.369Z,1520549221.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T22:47:01.369Z,1520549221.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:01.757Z,1520549221.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:01.772Z,1520549221.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T22:47:01.773Z,1520549221.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:02.161Z,1520549222.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:02.176Z,1520549222.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T22:47:02.177Z,1520549222.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:02.557Z,1520549222.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:02.578Z,1520549222.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T22:47:02.579Z,1520549222.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:02.954Z,1520549222.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:02.969Z,1520549222.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T22:47:02.970Z,1520549222.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:03.354Z,1520549223.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:03.369Z,1520549223.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T22:47:03.370Z,1520549223.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:03.754Z,1520549223.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:03.769Z,1520549223.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T22:47:03.769Z,1520549223.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:04.154Z,1520549224.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:04.169Z,1520549224.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T22:47:04.170Z,1520549224.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:04.561Z,1520549224.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:04.576Z,1520549224.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T22:47:04.577Z,1520549224.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:04.961Z,1520549224.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:04.975Z,1520549224.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T22:47:04.976Z,1520549224.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:05.360Z,1520549225.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:05.375Z,1520549225.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T22:47:05.376Z,1520549225.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:05.756Z,1520549225.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:05.771Z,1520549225.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T22:47:05.772Z,1520549225.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:06.153Z,1520549226.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:06.167Z,1520549226.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T22:47:06.168Z,1520549226.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:06.554Z,1520549226.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:06.569Z,1520549226.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T22:47:06.570Z,1520549226.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:06.957Z,1520549226.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:06.972Z,1520549226.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T22:47:06.973Z,1520549226.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:07.356Z,1520549227.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:07.371Z,1520549227.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T22:47:07.372Z,1520549227.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:07.761Z,1520549227.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:07.778Z,1520549227.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T22:47:07.779Z,1520549227.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:08.160Z,1520549228.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:08.175Z,1520549228.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T22:47:08.176Z,1520549228.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:08.562Z,1520549228.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:08.576Z,1520549228.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T22:47:08.577Z,1520549228.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:08.955Z,1520549228.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:08.971Z,1520549228.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T22:47:08.971Z,1520549228.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:09.355Z,1520549229.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:09.370Z,1520549229.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T22:47:09.371Z,1520549229.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:09.753Z,1520549229.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:09.768Z,1520549229.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T22:47:09.769Z,1520549229.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:10.151Z,1520549230.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:10.166Z,1520549230.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T22:47:10.167Z,1520549230.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:10.561Z,1520549230.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:10.577Z,1520549230.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T22:47:10.578Z,1520549230.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:10.960Z,1520549230.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:10.975Z,1520549230.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T22:47:10.976Z,1520549230.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:11.361Z,1520549231.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:11.375Z,1520549231.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T22:47:11.377Z,1520549231.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:11.751Z,1520549231.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:11.766Z,1520549231.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T22:47:11.767Z,1520549231.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:12.152Z,1520549232.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:12.166Z,1520549232.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T22:47:12.167Z,1520549232.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:12.551Z,1520549232.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:12.567Z,1520549232.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T22:47:12.568Z,1520549232.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:12.957Z,1520549232.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:12.973Z,1520549232.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:13.357Z,1520549233.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:13.372Z,1520549233.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:13.760Z,1520549233.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:13.776Z,1520549233.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:14.160Z,1520549234.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:14.183Z,1520549234.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:14.562Z,1520549234.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:14.577Z,1520549234.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:14.947Z,1520549234.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:14.974Z,1520549234.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:15.357Z,1520549235.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:15.372Z,1520549235.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:15.743Z,1520549235.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:15.778Z,1520549235.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:16.139Z,1520549236.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:16.171Z,1520549236.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:16.543Z,1520549236.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:16.579Z,1520549236.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:16.971Z,1520549236.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:16.987Z,1520549236.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:17.361Z,1520549237.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:17.378Z,1520549237.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:17.757Z,1520549237.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:17.785Z,1520549237.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:18.147Z,1520549238.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:18.176Z,1520549238.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:18.537Z,1520549238.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:18.565Z,1520549238.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:18.948Z,1520549238.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:18.977Z,1520549238.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:19.343Z,1520549239.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:19.384Z,1520549239.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:19.766Z,1520549239.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:19.782Z,1520549239.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:20.165Z,1520549240.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:20.182Z,1520549240.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:20.553Z,1520549240.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:20.586Z,1520549240.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:20.941Z,1520549240.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:20.956Z,1520549240.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:21.343Z,1520549241.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:21.379Z,1520549241.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:21.748Z,1520549241.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:21.763Z,1520549241.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:22.140Z,1520549242.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:22.156Z,1520549242.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:22.571Z,1520549242.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:22.587Z,1520549242.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:22.961Z,1520549242.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:22.985Z,1520549242.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:23.353Z,1520549243.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:23.389Z,1520549243.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:23.751Z,1520549243.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:23.766Z,1520549243.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:24.150Z,1520549244.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:24.165Z,1520549244.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:27.267Z,1520549247.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:27.295Z,1520549247.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:27.397Z,1520549247.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:27.436Z,1520549247.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:27.765Z,1520549247.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:27.797Z,1520549247.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:28.161Z,1520549248.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:28.176Z,1520549248.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:28.569Z,1520549248.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:28.600Z,1520549248.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:28.951Z,1520549248.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:28.967Z,1520549248.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:29.351Z,1520549249.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:29.366Z,1520549249.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:29.754Z,1520549249.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:29.769Z,1520549249.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:30.152Z,1520549250.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:30.167Z,1520549250.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:30.565Z,1520549250.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:30.580Z,1520549250.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:30.955Z,1520549250.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:30.979Z,1520549250.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:31.365Z,1520549251.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:31.380Z,1520549251.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:31.755Z,1520549251.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:31.770Z,1520549251.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:32.156Z,1520549252.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:32.171Z,1520549252.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:32.554Z,1520549252.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:32.569Z,1520549252.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:32.956Z,1520549252.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:32.971Z,1520549252.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:33.354Z,1520549253.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:33.369Z,1520549253.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:33.758Z,1520549253.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:33.773Z,1520549253.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:34.157Z,1520549254.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:34.172Z,1520549254.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:34.558Z,1520549254.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:34.573Z,1520549254.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:34.951Z,1520549254.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:34.966Z,1520549254.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:35.354Z,1520549255.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:35.369Z,1520549255.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:35.756Z,1520549255.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:35.771Z,1520549255.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:36.155Z,1520549256.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:36.170Z,1520549256.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:36.557Z,1520549256.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:36.572Z,1520549256.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:36.957Z,1520549256.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:36.972Z,1520549256.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:37.356Z,1520549257.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:37.371Z,1520549257.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:37.752Z,1520549257.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:37.767Z,1520549257.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:38.153Z,1520549258.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:38.172Z,1520549258.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:38.554Z,1520549258.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:38.570Z,1520549258.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:38.951Z,1520549258.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:38.976Z,1520549258.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:39.355Z,1520549259.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:39.370Z,1520549259.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:39.757Z,1520549259.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:39.773Z,1520549259.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:40.156Z,1520549260.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:40.171Z,1520549260.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:40.557Z,1520549260.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:40.573Z,1520549260.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:40.949Z,1520549260.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:40.969Z,1520549260.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:41.363Z,1520549261.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:41.414Z,1520549261.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:41.755Z,1520549261.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:41.819Z,1520549261.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:42.152Z,1520549262.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:42.168Z,1520549262.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:42.563Z,1520549262.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:42.618Z,1520549262.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:42.966Z,1520549262.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:42.991Z,1520549262.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:43.366Z,1520549263.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:43.381Z,1520549263.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:43.743Z,1520549263.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:43.804Z,1520549263.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:44.143Z,1520549264.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:44.173Z,1520549264.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:44.543Z,1520549264.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:44.579Z,1520549264.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:44.946Z,1520549264.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:44.991Z,1520549264.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:45.344Z,1520549265.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:45.380Z,1520549265.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:45.758Z,1520549265.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:45.785Z,1520549265.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:46.173Z,1520549266.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:46.188Z,1520549266.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:46.558Z,1520549266.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:46.585Z,1520549266.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:46.943Z,1520549266.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:46.979Z,1520549266.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:47.346Z,1520549267.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:47.362Z,1520549267.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:47.752Z,1520549267.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:47.768Z,1520549267.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:48.151Z,1520549268.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:48.167Z,1520549268.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:48.565Z,1520549268.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:48.597Z,1520549268.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:48.961Z,1520549268.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:48.976Z,1520549268.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:49.353Z,1520549269.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:49.369Z,1520549269.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:49.751Z,1520549269.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:49.766Z,1520549269.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:50.151Z,1520549270.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:50.167Z,1520549270.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:50.551Z,1520549270.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:50.566Z,1520549270.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:50.962Z,1520549270.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:50.976Z,1520549270.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:51.355Z,1520549271.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:51.370Z,1520549271.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:51.764Z,1520549271.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:51.780Z,1520549271.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:52.165Z,1520549272.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:52.181Z,1520549272.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:52.565Z,1520549272.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:52.581Z,1520549272.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:52.957Z,1520549272.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:52.972Z,1520549272.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:53.353Z,1520549273.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:53.368Z,1520549273.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:53.758Z,1520549273.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:53.773Z,1520549273.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:54.151Z,1520549274.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:54.166Z,1520549274.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:54.566Z,1520549274.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:54.581Z,1520549274.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:54.961Z,1520549274.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:54.981Z,1520549274.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:55.365Z,1520549275.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:55.380Z,1520549275.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:55.749Z,1520549275.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:55.781Z,1520549275.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:56.149Z,1520549276.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:56.171Z,1520549276.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:56.556Z,1520549276.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:56.571Z,1520549276.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:56.943Z,1520549276.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:56.974Z,1520549276.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:57.341Z,1520549277.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:57.368Z,1520549277.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:57.765Z,1520549277.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:57.781Z,1520549277.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:58.166Z,1520549278.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:58.182Z,1520549278.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:58.557Z,1520549278.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:58.585Z,1520549278.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:58.947Z,1520549278.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:58.974Z,1520549278.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:59.343Z,1520549279.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:59.376Z,1520549279.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:47:59.749Z,1520549279.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:47:59.776Z,1520549279.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:00.143Z,1520549280.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:00.174Z,1520549280.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:00.562Z,1520549280.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:00.578Z,1520549280.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:00.957Z,1520549280.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:00.980Z,1520549280.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:01.361Z,1520549281.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:01.376Z,1520549281.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:01.743Z,1520549281.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:01.777Z,1520549281.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:02.141Z,1520549282.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:02.164Z,1520549282.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:02.547Z,1520549282.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:02.582Z,1520549282.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:02.943Z,1520549282.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:02.980Z,1520549282.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:03.341Z,1520549283.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:03.356Z,1520549283.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:03.753Z,1520549283.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:03.780Z,1520549283.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:04.157Z,1520549284.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:04.185Z,1520549284.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:04.554Z,1520549284.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:04.587Z,1520549284.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:04.951Z,1520549284.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:04.984Z,1520549284.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:05.351Z,1520549285.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:05.389Z,1520549285.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:05.748Z,1520549285.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:05.763Z,1520549285.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:06.151Z,1520549286.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:06.187Z,1520549286.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:06.566Z,1520549286.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:06.592Z,1520549286.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:06.961Z,1520549286.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:06.991Z,1520549286.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:07.361Z,1520549287.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:07.392Z,1520549287.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:07.748Z,1520549287.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:07.763Z,1520549287.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:08.146Z,1520549288.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:08.165Z,1520549288.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:08.552Z,1520549288.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:08.567Z,1520549288.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:08.952Z,1520549288.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:08.967Z,1520549288.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:09.347Z,1520549289.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:09.370Z,1520549289.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:09.754Z,1520549289.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:09.775Z,1520549289.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:10.161Z,1520549290.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:10.176Z,1520549290.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:10.558Z,1520549290.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:10.656Z,1520549290.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:10.947Z,1520549290.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:10.970Z,1520549290.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:11.357Z,1520549291.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:11.372Z,1520549291.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:11.752Z,1520549291.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:11.768Z,1520549291.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:12.155Z,1520549292.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:12.171Z,1520549292.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:12.561Z,1520549292.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:12.576Z,1520549292.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:12.955Z,1520549292.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:12.987Z,1520549292.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:13.365Z,1520549293.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:13.380Z,1520549293.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:13.751Z,1520549293.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:13.766Z,1520549293.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:14.145Z,1520549294.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:14.168Z,1520549294.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:14.551Z,1520549294.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:14.570Z,1520549294.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:14.952Z,1520549294.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:14.967Z,1520549294.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:15.345Z,1520549295.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:15.372Z,1520549295.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:15.765Z,1520549295.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:15.780Z,1520549295.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:16.169Z,1520549296.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:16.184Z,1520549296.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:16.552Z,1520549296.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:16.583Z,1520549296.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:16.947Z,1520549296.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:16.973Z,1520549296.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:17.343Z,1520549297.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:17.374Z,1520549297.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:17.748Z,1520549297.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:17.774Z,1520549297.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:18.143Z,1520549298.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:18.170Z,1520549298.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:18.560Z,1520549298.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:18.587Z,1520549298.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:18.963Z,1520549298.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:18.983Z,1520549298.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:19.361Z,1520549299.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:19.377Z,1520549299.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:19.743Z,1520549299.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:19.775Z,1520549299.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:20.177Z,1520549300.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:20.203Z,1520549300.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:20.547Z,1520549300.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:20.573Z,1520549300.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:20.945Z,1520549300.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:20.975Z,1520549300.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:21.343Z,1520549301.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:21.378Z,1520549301.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:21.765Z,1520549301.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:21.781Z,1520549301.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:22.167Z,1520549302.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:22.183Z,1520549302.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:22.553Z,1520549302.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:22.588Z,1520549302.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:22.951Z,1520549302.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:22.983Z,1520549302.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:22.986Z,1520549302.986 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T22:48:22.986Z,1520549302.986 [Default:CheckIn:C.Wait] Stopped
2018-03-08T22:48:22.986Z,1520549302.986 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T22:48:22.986Z,1520549302.986 [Default:CheckIn:D] Running Loop=1
2018-03-08T22:48:23.343Z,1520549303.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:23.380Z,1520549303.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:23.383Z,1520549303.383 [Default:CheckIn:D] Stopped
2018-03-08T22:48:23.383Z,1520549303.383 [Default:CheckIn:E] Running Loop=1
2018-03-08T22:48:23.749Z,1520549303.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:23.778Z,1520549303.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:23.781Z,1520549303.781 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 902.642969 min 
2018-03-08T22:48:23.781Z,1520549303.781 [Default:CheckIn:E] Stopped
2018-03-08T22:48:23.782Z,1520549303.782 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T22:48:23.782Z,1520549303.782 [Default:CheckIn] Stopped
2018-03-08T22:48:23.782Z,1520549303.782 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T22:48:23.782Z,1520549303.782 [Default:CheckIn](INFO): Running loop #88
2018-03-08T22:48:23.782Z,1520549303.782 [Default:CheckIn] Running Loop=88
2018-03-08T22:48:23.782Z,1520549303.782 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T22:48:23.782Z,1520549303.782 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T22:48:24.153Z,1520549304.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:24.179Z,1520549304.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:24.565Z,1520549304.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:24.586Z,1520549304.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:27.674Z,1520549307.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:27.690Z,1520549307.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:27.809Z,1520549307.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:27.850Z,1520549307.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:28.139Z,1520549308.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:28.155Z,1520549308.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:28.543Z,1520549308.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:28.558Z,1520549308.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:28.946Z,1520549308.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:28.961Z,1520549308.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:29.345Z,1520549309.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:29.360Z,1520549309.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:29.757Z,1520549309.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:29.790Z,1520549309.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:30.153Z,1520549310.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:30.185Z,1520549310.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:30.550Z,1520549310.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:30.570Z,1520549310.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:30.944Z,1520549310.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:30.959Z,1520549310.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:31.341Z,1520549311.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:31.356Z,1520549311.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:31.746Z,1520549311.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:31.761Z,1520549311.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:32.141Z,1520549312.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:32.156Z,1520549312.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:32.546Z,1520549312.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:32.567Z,1520549312.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:32.957Z,1520549312.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:32.972Z,1520549312.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:33.352Z,1520549313.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:33.367Z,1520549313.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:33.748Z,1520549313.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:33.764Z,1520549313.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:34.148Z,1520549314.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:34.163Z,1520549314.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:34.549Z,1520549314.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:34.564Z,1520549314.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:34.951Z,1520549314.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:34.966Z,1520549314.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:35.354Z,1520549315.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:35.369Z,1520549315.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:35.749Z,1520549315.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:35.765Z,1520549315.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:36.134Z,1520549316.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:36.158Z,1520549316.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:36.542Z,1520549316.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:36.558Z,1520549316.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:36.942Z,1520549316.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:36.970Z,1520549316.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:37.328Z,1520549317.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:37.357Z,1520549317.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:37.750Z,1520549317.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:37.778Z,1520549317.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:38.157Z,1520549318.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:38.172Z,1520549318.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:38.554Z,1520549318.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:38.569Z,1520549318.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:38.937Z,1520549318.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:38.970Z,1520549318.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:39.347Z,1520549319.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:39.362Z,1520549319.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:39.747Z,1520549319.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:39.762Z,1520549319.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:40.140Z,1520549320.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:40.176Z,1520549320.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:40.544Z,1520549320.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:40.559Z,1520549320.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:40.958Z,1520549320.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:40.978Z,1520549320.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:41.361Z,1520549321.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:41.376Z,1520549321.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:41.757Z,1520549321.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:41.771Z,1520549321.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:42.128Z,1520549322.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:42.168Z,1520549322.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:42.544Z,1520549322.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:42.567Z,1520549322.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:42.950Z,1520549322.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:42.965Z,1520549322.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:43.332Z,1520549323.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:43.360Z,1520549323.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:43.758Z,1520549323.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:43.779Z,1520549323.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:44.162Z,1520549324.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:44.178Z,1520549324.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:44.554Z,1520549324.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:44.574Z,1520549324.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:44.940Z,1520549324.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:44.967Z,1520549324.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:45.334Z,1520549325.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:45.361Z,1520549325.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:45.738Z,1520549325.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:45.765Z,1520549325.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:46.136Z,1520549326.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:46.167Z,1520549326.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:46.535Z,1520549326.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:46.562Z,1520549326.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:46.967Z,1520549326.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:46.983Z,1520549326.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:47.360Z,1520549327.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:47.382Z,1520549327.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:47.759Z,1520549327.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:47.778Z,1520549327.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:48.128Z,1520549328.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:48.163Z,1520549328.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:48.535Z,1520549328.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:48.561Z,1520549328.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:48.936Z,1520549328.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:48.972Z,1520549328.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:49.332Z,1520549329.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:49.360Z,1520549329.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:49.756Z,1520549329.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:49.772Z,1520549329.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:50.161Z,1520549330.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:50.176Z,1520549330.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:50.549Z,1520549330.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:50.572Z,1520549330.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:50.935Z,1520549330.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:50.967Z,1520549330.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:51.331Z,1520549331.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:51.434Z,1520549331.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:51.738Z,1520549331.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:51.771Z,1520549331.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:52.140Z,1520549332.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:52.170Z,1520549332.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:52.536Z,1520549332.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:52.572Z,1520549332.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:52.958Z,1520549332.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:52.979Z,1520549332.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:53.353Z,1520549333.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:53.376Z,1520549333.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:53.746Z,1520549333.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:53.773Z,1520549333.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:54.132Z,1520549334.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:54.148Z,1520549334.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:54.538Z,1520549334.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:54.578Z,1520549334.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:54.944Z,1520549334.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:54.959Z,1520549334.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:55.332Z,1520549335.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:55.348Z,1520549335.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:55.753Z,1520549335.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:55.777Z,1520549335.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:56.157Z,1520549336.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:56.182Z,1520549336.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:56.546Z,1520549336.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:56.578Z,1520549336.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:56.943Z,1520549336.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:56.962Z,1520549336.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:57.340Z,1520549337.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:57.355Z,1520549337.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:57.743Z,1520549337.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:57.763Z,1520549337.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:58.142Z,1520549338.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:58.157Z,1520549338.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:58.539Z,1520549338.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:58.558Z,1520549338.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:58.946Z,1520549338.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:58.961Z,1520549338.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:59.357Z,1520549339.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:59.388Z,1520549339.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:48:59.742Z,1520549339.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:48:59.757Z,1520549339.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:00.131Z,1520549340.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:00.168Z,1520549340.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:00.541Z,1520549340.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:00.556Z,1520549340.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:00.948Z,1520549340.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:00.963Z,1520549340.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:01.331Z,1520549341.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:01.368Z,1520549341.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:01.757Z,1520549341.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:01.789Z,1520549341.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:02.157Z,1520549342.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:02.190Z,1520549342.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:02.542Z,1520549342.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:02.558Z,1520549342.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:02.945Z,1520549342.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:02.961Z,1520549342.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:03.344Z,1520549343.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:03.359Z,1520549343.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:03.732Z,1520549343.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:03.761Z,1520549343.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:04.146Z,1520549344.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:04.167Z,1520549344.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:04.544Z,1520549344.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:04.560Z,1520549344.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:04.958Z,1520549344.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:04.989Z,1520549344.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:05.354Z,1520549345.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:05.369Z,1520549345.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:05.749Z,1520549345.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:05.765Z,1520549345.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:06.141Z,1520549346.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:06.157Z,1520549346.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:06.542Z,1520549346.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:06.561Z,1520549346.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:06.949Z,1520549346.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:06.964Z,1520549346.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:07.340Z,1520549347.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:07.356Z,1520549347.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:07.748Z,1520549347.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:07.764Z,1520549347.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:08.153Z,1520549348.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:08.168Z,1520549348.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:08.546Z,1520549348.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:08.575Z,1520549348.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:08.949Z,1520549348.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:08.964Z,1520549348.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:09.348Z,1520549349.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:09.363Z,1520549349.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:09.743Z,1520549349.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:09.758Z,1520549349.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:10.144Z,1520549350.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:10.166Z,1520549350.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:10.548Z,1520549350.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:10.563Z,1520549350.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:10.955Z,1520549350.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:10.975Z,1520549350.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:11.353Z,1520549351.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:11.368Z,1520549351.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:11.754Z,1520549351.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:11.769Z,1520549351.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:12.143Z,1520549352.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:12.159Z,1520549352.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:12.538Z,1520549352.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:12.562Z,1520549352.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:12.950Z,1520549352.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:12.965Z,1520549352.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:13.334Z,1520549353.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:13.365Z,1520549353.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:13.758Z,1520549353.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:13.779Z,1520549353.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:14.158Z,1520549354.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:14.173Z,1520549354.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:14.550Z,1520549354.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:14.583Z,1520549354.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:14.946Z,1520549354.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:14.962Z,1520549354.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:15.347Z,1520549355.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:15.363Z,1520549355.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:15.747Z,1520549355.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:15.771Z,1520549355.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:16.145Z,1520549356.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:16.164Z,1520549356.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:16.535Z,1520549356.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:16.569Z,1520549356.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:16.957Z,1520549356.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:16.973Z,1520549356.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:17.358Z,1520549357.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:17.378Z,1520549357.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:17.757Z,1520549357.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:17.773Z,1520549357.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:18.132Z,1520549358.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:18.164Z,1520549358.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:18.540Z,1520549358.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:18.566Z,1520549358.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:18.940Z,1520549358.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:18.967Z,1520549358.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:19.332Z,1520549359.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:19.356Z,1520549359.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:19.758Z,1520549359.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:19.773Z,1520549359.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:20.161Z,1520549360.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:20.176Z,1520549360.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:20.556Z,1520549360.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:20.571Z,1520549360.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:20.935Z,1520549360.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:20.967Z,1520549360.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:21.339Z,1520549361.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:21.371Z,1520549361.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:21.738Z,1520549361.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:21.770Z,1520549361.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:22.136Z,1520549362.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:22.163Z,1520549362.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:22.539Z,1520549362.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:22.574Z,1520549362.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:22.950Z,1520549362.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:22.976Z,1520549362.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:23.350Z,1520549363.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:23.387Z,1520549363.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:23.750Z,1520549363.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:23.775Z,1520549363.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:24.136Z,1520549364.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:24.152Z,1520549364.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:24.543Z,1520549364.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:24.583Z,1520549364.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:24.944Z,1520549364.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:24.959Z,1520549364.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:28.037Z,1520549368.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:28.053Z,1520549368.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:28.175Z,1520549368.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:28.211Z,1520549368.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:28.541Z,1520549368.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:28.557Z,1520549368.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:28.937Z,1520549368.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:28.953Z,1520549368.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:29.330Z,1520549369.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:29.350Z,1520549369.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:29.711Z,1520549369.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:29.744Z,1520549369.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:30.112Z,1520549370.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:30.143Z,1520549370.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:30.534Z,1520549370.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:30.549Z,1520549370.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:30.943Z,1520549370.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:30.962Z,1520549370.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:31.324Z,1520549371.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:31.341Z,1520549371.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:31.716Z,1520549371.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:31.731Z,1520549371.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:32.134Z,1520549372.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:32.149Z,1520549372.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:32.512Z,1520549372.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:32.540Z,1520549372.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:32.925Z,1520549372.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:32.941Z,1520549372.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:33.317Z,1520549373.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:33.343Z,1520549373.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:33.734Z,1520549373.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:33.750Z,1520549373.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:34.135Z,1520549374.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:34.154Z,1520549374.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:34.536Z,1520549374.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:34.559Z,1520549374.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:34.912Z,1520549374.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:34.941Z,1520549374.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:35.317Z,1520549375.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:35.341Z,1520549375.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:35.724Z,1520549375.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:35.747Z,1520549375.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:36.112Z,1520549376.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:36.139Z,1520549376.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:36.532Z,1520549376.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:36.548Z,1520549376.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:36.935Z,1520549376.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:36.951Z,1520549376.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:37.329Z,1520549377.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:37.345Z,1520549377.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:37.728Z,1520549377.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:37.743Z,1520549377.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:38.117Z,1520549378.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:38.150Z,1520549378.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:38.518Z,1520549378.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:38.546Z,1520549378.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:38.915Z,1520549378.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:38.943Z,1520549378.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:39.330Z,1520549379.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:39.354Z,1520549379.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:39.734Z,1520549379.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:39.754Z,1520549379.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:40.141Z,1520549380.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:40.162Z,1520549380.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:40.538Z,1520549380.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:40.558Z,1520549380.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:40.919Z,1520549380.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:40.947Z,1520549380.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:41.314Z,1520549381.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:41.347Z,1520549381.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:41.719Z,1520549381.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:41.759Z,1520549381.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:42.118Z,1520549382.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:42.147Z,1520549382.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:42.545Z,1520549382.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:42.573Z,1520549382.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:42.929Z,1520549382.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:42.962Z,1520549382.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:43.358Z,1520549383.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:43.373Z,1520549383.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:43.725Z,1520549383.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:43.762Z,1520549383.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:44.124Z,1520549384.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:44.171Z,1520549384.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:44.522Z,1520549384.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:44.546Z,1520549384.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:44.926Z,1520549384.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:44.943Z,1520549384.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:45.320Z,1520549385.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:45.349Z,1520549385.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:45.729Z,1520549385.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:45.745Z,1520549385.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:46.129Z,1520549386.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:46.150Z,1520549386.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:46.549Z,1520549386.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:46.588Z,1520549386.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:46.923Z,1520549386.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:46.940Z,1520549386.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:47.327Z,1520549387.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:47.343Z,1520549387.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:47.734Z,1520549387.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:47.754Z,1520549387.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:48.124Z,1520549388.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:48.140Z,1520549388.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:48.534Z,1520549388.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:48.551Z,1520549388.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:48.932Z,1520549388.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:48.948Z,1520549388.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:49.330Z,1520549389.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:49.346Z,1520549389.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:49.727Z,1520549389.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:49.743Z,1520549389.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:50.118Z,1520549390.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:50.135Z,1520549390.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:50.518Z,1520549390.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:50.535Z,1520549390.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:50.923Z,1520549390.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:50.940Z,1520549390.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:51.322Z,1520549391.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:51.339Z,1520549391.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:51.732Z,1520549391.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:51.755Z,1520549391.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:52.132Z,1520549392.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:52.151Z,1520549392.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:52.531Z,1520549392.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:52.547Z,1520549392.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:52.917Z,1520549392.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:52.938Z,1520549392.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:53.317Z,1520549393.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:53.341Z,1520549393.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:53.723Z,1520549393.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:53.739Z,1520549393.739 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:53.739Z,1520549393.739 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 301
2018-03-08T22:49:53.739Z,1520549393.739 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T22:49:53.741Z,1520549393.741 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:53.741Z,1520549393.741 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 301
2018-03-08T22:49:53.741Z,1520549393.741 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T22:49:53.743Z,1520549393.743 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:53.743Z,1520549393.743 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 301
2018-03-08T22:49:53.743Z,1520549393.743 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T22:49:53.755Z,1520549393.755 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T22:49:53.755Z,1520549393.755 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T22:49:53.755Z,1520549393.755 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T22:49:54.135Z,1520549394.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:54.161Z,1520549394.161 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T22:49:54.161Z,1520549394.161 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 301
2018-03-08T22:49:54.162Z,1520549394.162 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T22:49:54.162Z,1520549394.162 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 301
2018-03-08T22:49:54.162Z,1520549394.162 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T22:49:54.162Z,1520549394.162 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 301
2018-03-08T22:49:54.533Z,1520549394.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:54.548Z,1520549394.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T22:49:54.548Z,1520549394.548 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:49:54.549Z,1520549394.549 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:49:54.549Z,1520549394.549 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T22:49:54.550Z,1520549394.550 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:49:54.550Z,1520549394.550 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:49:54.550Z,1520549394.550 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T22:49:54.551Z,1520549394.551 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:49:54.551Z,1520549394.551 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:49:54.932Z,1520549394.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:54.947Z,1520549394.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T22:49:54.948Z,1520549394.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:55.337Z,1520549395.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:55.352Z,1520549395.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T22:49:55.354Z,1520549395.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:55.714Z,1520549395.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:55.740Z,1520549395.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T22:49:55.741Z,1520549395.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:56.115Z,1520549396.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:56.146Z,1520549396.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T22:49:56.147Z,1520549396.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:56.518Z,1520549396.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:56.545Z,1520549396.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T22:49:56.546Z,1520549396.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:56.916Z,1520549396.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:56.942Z,1520549396.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T22:49:56.943Z,1520549396.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:57.310Z,1520549397.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:57.343Z,1520549397.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T22:49:57.344Z,1520549397.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:57.737Z,1520549397.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:57.753Z,1520549397.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T22:49:57.754Z,1520549397.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:58.138Z,1520549398.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:58.158Z,1520549398.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T22:49:58.159Z,1520549398.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:58.537Z,1520549398.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:58.551Z,1520549398.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T22:49:58.552Z,1520549398.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:58.918Z,1520549398.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:58.946Z,1520549398.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T22:49:58.947Z,1520549398.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:59.314Z,1520549399.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:59.340Z,1520549399.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T22:49:59.341Z,1520549399.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:49:59.715Z,1520549399.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:49:59.743Z,1520549399.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T22:49:59.744Z,1520549399.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:00.118Z,1520549400.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:00.146Z,1520549400.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T22:50:00.146Z,1520549400.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:00.533Z,1520549400.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:00.549Z,1520549400.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T22:50:00.550Z,1520549400.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:00.939Z,1520549400.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:00.988Z,1520549400.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T22:50:00.989Z,1520549400.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:01.337Z,1520549401.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:01.352Z,1520549401.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T22:50:01.353Z,1520549401.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:01.715Z,1520549401.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:01.741Z,1520549401.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T22:50:01.742Z,1520549401.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:02.110Z,1520549402.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:02.143Z,1520549402.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T22:50:02.144Z,1520549402.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:02.518Z,1520549402.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:02.546Z,1520549402.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T22:50:02.547Z,1520549402.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:02.916Z,1520549402.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:02.948Z,1520549402.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T22:50:02.949Z,1520549402.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:03.310Z,1520549403.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:03.347Z,1520549403.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T22:50:03.348Z,1520549403.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:03.738Z,1520549403.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:03.753Z,1520549403.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T22:50:03.754Z,1520549403.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:04.141Z,1520549404.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:04.162Z,1520549404.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T22:50:04.163Z,1520549404.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:04.537Z,1520549404.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:04.551Z,1520549404.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T22:50:04.552Z,1520549404.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:04.918Z,1520549404.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:04.946Z,1520549404.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T22:50:04.947Z,1520549404.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:05.314Z,1520549405.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:05.340Z,1520549405.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T22:50:05.341Z,1520549405.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:05.711Z,1520549405.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:05.747Z,1520549405.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T22:50:05.748Z,1520549405.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:06.118Z,1520549406.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:06.145Z,1520549406.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T22:50:06.146Z,1520549406.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:06.545Z,1520549406.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:06.560Z,1520549406.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T22:50:06.561Z,1520549406.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:06.933Z,1520549406.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:06.948Z,1520549406.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T22:50:06.949Z,1520549406.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:07.335Z,1520549407.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:07.350Z,1520549407.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T22:50:07.351Z,1520549407.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:07.714Z,1520549407.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:07.748Z,1520549407.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T22:50:07.749Z,1520549407.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:08.110Z,1520549408.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:08.147Z,1520549408.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T22:50:08.148Z,1520549408.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:08.517Z,1520549408.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:08.545Z,1520549408.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T22:50:08.546Z,1520549408.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:08.916Z,1520549408.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:08.947Z,1520549408.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T22:50:08.948Z,1520549408.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:09.318Z,1520549409.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:09.351Z,1520549409.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T22:50:09.352Z,1520549409.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:09.739Z,1520549409.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:09.754Z,1520549409.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T22:50:09.755Z,1520549409.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:10.138Z,1520549410.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:10.153Z,1520549410.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T22:50:10.154Z,1520549410.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:10.526Z,1520549410.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:10.553Z,1520549410.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T22:50:10.554Z,1520549410.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:10.918Z,1520549410.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:11.046Z,1520549411.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-08T22:50:11.047Z,1520549411.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:11.314Z,1520549411.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:11.341Z,1520549411.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T22:50:11.342Z,1520549411.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:11.715Z,1520549411.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:11.750Z,1520549411.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T22:50:11.751Z,1520549411.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:12.135Z,1520549412.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:12.158Z,1520549412.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T22:50:12.159Z,1520549412.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:12.537Z,1520549412.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:12.552Z,1520549412.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T22:50:12.553Z,1520549412.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:12.944Z,1520549412.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:12.959Z,1520549412.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T22:50:12.960Z,1520549412.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:13.339Z,1520549413.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:13.358Z,1520549413.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T22:50:13.359Z,1520549413.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:13.718Z,1520549413.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:13.751Z,1520549413.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:14.123Z,1520549414.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:14.139Z,1520549414.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:14.516Z,1520549414.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:14.531Z,1520549414.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:14.931Z,1520549414.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:14.970Z,1520549414.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:15.323Z,1520549415.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:15.338Z,1520549415.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:15.738Z,1520549415.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:15.761Z,1520549415.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:16.134Z,1520549416.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:16.165Z,1520549416.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:16.533Z,1520549416.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:16.571Z,1520549416.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:16.924Z,1520549416.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:16.940Z,1520549416.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:17.326Z,1520549417.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:17.347Z,1520549417.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:17.725Z,1520549417.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:17.740Z,1520549417.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:18.125Z,1520549418.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:18.141Z,1520549418.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:18.526Z,1520549418.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:18.542Z,1520549418.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:18.937Z,1520549418.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:18.974Z,1520549418.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:19.330Z,1520549419.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:19.348Z,1520549419.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:19.726Z,1520549419.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:19.742Z,1520549419.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:20.126Z,1520549420.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:20.142Z,1520549420.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:20.526Z,1520549420.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:20.542Z,1520549420.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:20.924Z,1520549420.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:20.941Z,1520549420.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:21.317Z,1520549421.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:21.332Z,1520549421.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:21.728Z,1520549421.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:21.751Z,1520549421.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:22.134Z,1520549422.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:22.151Z,1520549422.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:22.529Z,1520549422.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:22.550Z,1520549422.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:22.928Z,1520549422.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:22.943Z,1520549422.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:23.326Z,1520549423.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:23.347Z,1520549423.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:23.727Z,1520549423.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:23.742Z,1520549423.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:24.127Z,1520549424.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:24.144Z,1520549424.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:24.529Z,1520549424.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:24.545Z,1520549424.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:24.928Z,1520549424.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:24.943Z,1520549424.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:25.329Z,1520549425.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:25.345Z,1520549425.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:28.427Z,1520549428.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:28.443Z,1520549428.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:28.549Z,1520549428.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:28.582Z,1520549428.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:28.930Z,1520549428.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:28.950Z,1520549428.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:29.334Z,1520549429.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:29.349Z,1520549429.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:29.733Z,1520549429.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:29.750Z,1520549429.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:30.110Z,1520549430.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:30.136Z,1520549430.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:30.502Z,1520549430.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:30.535Z,1520549430.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:30.911Z,1520549430.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:30.938Z,1520549430.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:31.306Z,1520549431.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:31.332Z,1520549431.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:31.725Z,1520549431.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:31.756Z,1520549431.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:32.121Z,1520549432.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:32.140Z,1520549432.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:32.525Z,1520549432.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:32.541Z,1520549432.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:32.906Z,1520549432.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:32.934Z,1520549432.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:33.302Z,1520549433.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:33.335Z,1520549433.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:33.710Z,1520549433.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:33.736Z,1520549433.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:34.107Z,1520549434.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:34.146Z,1520549434.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:34.505Z,1520549434.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:34.528Z,1520549434.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:34.929Z,1520549434.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:34.951Z,1520549434.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:35.317Z,1520549435.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:35.350Z,1520549435.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:35.729Z,1520549435.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:35.751Z,1520549435.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:36.106Z,1520549436.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:36.143Z,1520549436.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:36.505Z,1520549436.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:36.545Z,1520549436.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:36.905Z,1520549436.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:36.920Z,1520549436.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:37.309Z,1520549437.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:37.347Z,1520549437.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:37.721Z,1520549437.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:37.749Z,1520549437.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:38.117Z,1520549438.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:38.144Z,1520549438.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:38.517Z,1520549438.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:38.544Z,1520549438.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:38.906Z,1520549438.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:38.921Z,1520549438.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:39.304Z,1520549439.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:39.321Z,1520549439.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:39.711Z,1520549439.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:39.727Z,1520549439.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:40.111Z,1520549440.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:40.126Z,1520549440.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:40.507Z,1520549440.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:40.523Z,1520549440.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:40.925Z,1520549440.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:40.949Z,1520549440.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:41.330Z,1520549441.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:41.356Z,1520549441.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:41.721Z,1520549441.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:41.755Z,1520549441.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:42.114Z,1520549442.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:42.155Z,1520549442.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:42.511Z,1520549442.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:42.530Z,1520549442.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:42.911Z,1520549442.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:42.927Z,1520549442.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:43.314Z,1520549443.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:43.357Z,1520549443.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:43.725Z,1520549443.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:43.752Z,1520549443.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:44.122Z,1520549444.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:44.154Z,1520549444.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:44.529Z,1520549444.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:44.559Z,1520549444.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:44.911Z,1520549444.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:44.926Z,1520549444.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:45.307Z,1520549445.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:45.322Z,1520549445.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:45.714Z,1520549445.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:45.755Z,1520549445.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:46.112Z,1520549446.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:46.157Z,1520549446.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:46.511Z,1520549446.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:46.530Z,1520549446.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:46.925Z,1520549446.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:46.950Z,1520549446.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:47.325Z,1520549447.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:47.351Z,1520549447.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:47.721Z,1520549447.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:47.757Z,1520549447.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:48.115Z,1520549448.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:48.131Z,1520549448.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:48.512Z,1520549448.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:48.531Z,1520549448.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:48.908Z,1520549448.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:48.930Z,1520549448.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:49.314Z,1520549449.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:49.329Z,1520549449.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:49.722Z,1520549449.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:49.738Z,1520549449.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:50.118Z,1520549450.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:50.138Z,1520549450.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:50.521Z,1520549450.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:50.537Z,1520549450.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:50.920Z,1520549450.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:50.936Z,1520549450.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:51.305Z,1520549451.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:51.326Z,1520549451.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:51.719Z,1520549451.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:51.734Z,1520549451.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:52.120Z,1520549452.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:52.136Z,1520549452.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:52.511Z,1520549452.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:52.530Z,1520549452.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:52.920Z,1520549452.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:52.936Z,1520549452.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:53.325Z,1520549453.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:53.341Z,1520549453.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:53.725Z,1520549453.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:53.741Z,1520549453.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:54.118Z,1520549454.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:54.139Z,1520549454.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:54.520Z,1520549454.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:54.536Z,1520549454.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:54.916Z,1520549454.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:54.931Z,1520549454.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:55.318Z,1520549455.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:55.339Z,1520549455.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:55.723Z,1520549455.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:55.739Z,1520549455.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:56.125Z,1520549456.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:56.141Z,1520549456.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:56.520Z,1520549456.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:56.536Z,1520549456.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:56.916Z,1520549456.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:56.931Z,1520549456.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:57.318Z,1520549457.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:57.334Z,1520549457.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:57.714Z,1520549457.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:57.730Z,1520549457.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:58.119Z,1520549458.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:58.136Z,1520549458.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:58.509Z,1520549458.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:58.537Z,1520549458.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:58.922Z,1520549458.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:58.939Z,1520549458.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:59.324Z,1520549459.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:59.341Z,1520549459.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:50:59.720Z,1520549459.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:50:59.736Z,1520549459.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:00.119Z,1520549460.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:00.134Z,1520549460.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:00.517Z,1520549460.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:00.532Z,1520549460.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:00.919Z,1520549460.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:00.942Z,1520549460.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:01.315Z,1520549461.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:01.330Z,1520549461.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:01.722Z,1520549461.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:01.746Z,1520549461.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:02.128Z,1520549462.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:02.151Z,1520549462.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:02.530Z,1520549462.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:02.551Z,1520549462.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:02.916Z,1520549462.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:02.932Z,1520549462.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:03.316Z,1520549463.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:03.339Z,1520549463.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:03.716Z,1520549463.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:03.731Z,1520549463.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:04.104Z,1520549464.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:04.136Z,1520549464.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:04.511Z,1520549464.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:04.537Z,1520549464.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:04.921Z,1520549464.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:04.947Z,1520549464.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:05.325Z,1520549465.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:05.349Z,1520549465.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:05.718Z,1520549465.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:05.745Z,1520549465.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:06.106Z,1520549466.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:06.143Z,1520549466.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:06.506Z,1520549466.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:06.527Z,1520549466.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:06.915Z,1520549466.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:06.931Z,1520549466.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:07.311Z,1520549467.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:07.327Z,1520549467.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:07.721Z,1520549467.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:07.746Z,1520549467.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:08.125Z,1520549468.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:08.157Z,1520549468.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:08.529Z,1520549468.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:08.565Z,1520549468.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:08.915Z,1520549468.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:08.930Z,1520549468.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:09.315Z,1520549469.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:09.331Z,1520549469.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:09.715Z,1520549469.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:09.730Z,1520549469.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:10.117Z,1520549470.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:10.132Z,1520549470.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:10.515Z,1520549470.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:10.531Z,1520549470.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:10.917Z,1520549470.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:10.933Z,1520549470.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:11.329Z,1520549471.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:11.344Z,1520549471.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:11.717Z,1520549471.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:11.733Z,1520549471.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:12.115Z,1520549472.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:12.131Z,1520549472.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:12.515Z,1520549472.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:12.529Z,1520549472.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:12.918Z,1520549472.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:12.939Z,1520549472.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:13.317Z,1520549473.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:13.333Z,1520549473.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:13.720Z,1520549473.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:13.736Z,1520549473.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:14.125Z,1520549474.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:14.141Z,1520549474.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:14.519Z,1520549474.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:14.539Z,1520549474.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:14.919Z,1520549474.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:14.935Z,1520549474.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:15.318Z,1520549475.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:15.334Z,1520549475.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:15.714Z,1520549475.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:15.735Z,1520549475.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:16.107Z,1520549476.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:16.150Z,1520549476.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:16.507Z,1520549476.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:16.534Z,1520549476.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:16.917Z,1520549476.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:16.939Z,1520549476.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:17.334Z,1520549477.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:17.360Z,1520549477.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:17.719Z,1520549477.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:17.739Z,1520549477.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:18.107Z,1520549478.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:18.135Z,1520549478.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:18.507Z,1520549478.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:18.534Z,1520549478.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:18.909Z,1520549478.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:18.938Z,1520549478.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:19.318Z,1520549479.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:19.334Z,1520549479.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:19.725Z,1520549479.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:19.741Z,1520549479.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:20.125Z,1520549480.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:20.141Z,1520549480.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:20.523Z,1520549480.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:20.547Z,1520549480.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:20.919Z,1520549480.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:20.934Z,1520549480.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:21.318Z,1520549481.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:21.339Z,1520549481.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:21.715Z,1520549481.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:21.730Z,1520549481.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:22.115Z,1520549482.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:22.130Z,1520549482.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:22.518Z,1520549482.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:22.539Z,1520549482.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:22.923Z,1520549482.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:22.939Z,1520549482.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:23.324Z,1520549483.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:23.339Z,1520549483.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:23.722Z,1520549483.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:23.746Z,1520549483.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:24.114Z,1520549484.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:24.129Z,1520549484.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:24.516Z,1520549484.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:24.531Z,1520549484.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:24.919Z,1520549484.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:24.935Z,1520549484.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:25.314Z,1520549485.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:25.329Z,1520549485.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:25.724Z,1520549485.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:25.746Z,1520549485.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:28.825Z,1520549488.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:28.841Z,1520549488.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:28.953Z,1520549488.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:28.994Z,1520549488.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:29.320Z,1520549489.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:29.336Z,1520549489.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:29.703Z,1520549489.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:29.736Z,1520549489.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:30.110Z,1520549490.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:30.137Z,1520549490.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:30.522Z,1520549490.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:30.540Z,1520549490.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:30.929Z,1520549490.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:30.950Z,1520549490.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:31.325Z,1520549491.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:31.341Z,1520549491.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:31.702Z,1520549491.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:31.738Z,1520549491.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:32.106Z,1520549492.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:32.134Z,1520549492.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:32.503Z,1520549492.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:32.534Z,1520549492.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:32.904Z,1520549492.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:32.939Z,1520549492.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:33.307Z,1520549493.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:33.336Z,1520549493.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:33.717Z,1520549493.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:33.741Z,1520549493.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:34.127Z,1520549494.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:34.146Z,1520549494.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:34.526Z,1520549494.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:34.542Z,1520549494.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:34.906Z,1520549494.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:34.934Z,1520549494.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:35.300Z,1520549495.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:35.340Z,1520549495.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:35.705Z,1520549495.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:35.732Z,1520549495.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:36.106Z,1520549496.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:36.132Z,1520549496.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:36.529Z,1520549496.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:36.550Z,1520549496.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:36.924Z,1520549496.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:36.940Z,1520549496.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:37.321Z,1520549497.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:37.337Z,1520549497.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:37.702Z,1520549497.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:37.735Z,1520549497.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:38.107Z,1520549498.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:38.135Z,1520549498.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:38.502Z,1520549498.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:38.534Z,1520549498.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:38.903Z,1520549498.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:38.942Z,1520549498.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:39.306Z,1520549499.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:39.339Z,1520549499.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:39.712Z,1520549499.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:39.736Z,1520549499.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:40.131Z,1520549500.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:40.146Z,1520549500.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:40.513Z,1520549500.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:40.541Z,1520549500.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:40.903Z,1520549500.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:40.919Z,1520549500.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:41.304Z,1520549501.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:41.318Z,1520549501.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:41.704Z,1520549501.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:41.719Z,1520549501.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:42.109Z,1520549502.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:42.124Z,1520549502.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:42.523Z,1520549502.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:42.563Z,1520549502.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:42.921Z,1520549502.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:42.962Z,1520549502.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:43.323Z,1520549503.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:43.356Z,1520549503.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:43.719Z,1520549503.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:43.754Z,1520549503.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:44.099Z,1520549504.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:44.131Z,1520549504.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:44.510Z,1520549504.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:44.530Z,1520549504.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:44.911Z,1520549504.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:44.931Z,1520549504.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:45.311Z,1520549505.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:45.332Z,1520549505.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:45.713Z,1520549505.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:45.753Z,1520549505.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:46.121Z,1520549506.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:46.137Z,1520549506.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:46.516Z,1520549506.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:46.531Z,1520549506.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:46.910Z,1520549506.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:46.925Z,1520549506.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:47.314Z,1520549507.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:47.329Z,1520549507.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:47.710Z,1520549507.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:47.739Z,1520549507.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:48.114Z,1520549508.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:48.129Z,1520549508.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:48.521Z,1520549508.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:48.537Z,1520549508.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:48.924Z,1520549508.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:48.940Z,1520549508.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:49.324Z,1520549509.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:49.339Z,1520549509.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:49.715Z,1520549509.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:49.735Z,1520549509.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:50.100Z,1520549510.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:50.127Z,1520549510.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:50.511Z,1520549510.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:50.526Z,1520549510.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:50.911Z,1520549510.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:50.930Z,1520549510.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:51.300Z,1520549511.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:51.332Z,1520549511.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:51.724Z,1520549511.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:51.740Z,1520549511.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:52.125Z,1520549512.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:52.146Z,1520549512.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:52.518Z,1520549512.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:52.534Z,1520549512.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:52.901Z,1520549512.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:52.935Z,1520549512.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:53.315Z,1520549513.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:53.330Z,1520549513.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:53.715Z,1520549513.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:53.731Z,1520549513.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:54.102Z,1520549514.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:54.135Z,1520549514.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:54.529Z,1520549514.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:54.544Z,1520549514.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:54.921Z,1520549514.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:54.937Z,1520549514.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:55.328Z,1520549515.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:55.343Z,1520549515.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:55.703Z,1520549515.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:55.729Z,1520549515.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:56.100Z,1520549516.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:56.128Z,1520549516.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:56.506Z,1520549516.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:56.532Z,1520549516.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:56.903Z,1520549516.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:56.929Z,1520549516.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:57.300Z,1520549517.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:57.339Z,1520549517.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:57.725Z,1520549517.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:57.741Z,1520549517.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:58.125Z,1520549518.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:58.146Z,1520549518.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:58.521Z,1520549518.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:58.545Z,1520549518.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:58.906Z,1520549518.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:58.932Z,1520549518.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:59.302Z,1520549519.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:59.336Z,1520549519.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:51:59.707Z,1520549519.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:51:59.735Z,1520549519.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:00.104Z,1520549520.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:00.136Z,1520549520.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:00.516Z,1520549520.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:00.542Z,1520549520.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:00.929Z,1520549520.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:00.951Z,1520549520.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:01.325Z,1520549521.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:01.341Z,1520549521.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:01.703Z,1520549521.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:01.739Z,1520549521.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:02.096Z,1520549522.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:02.135Z,1520549522.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:02.506Z,1520549522.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:02.543Z,1520549522.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:02.906Z,1520549522.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:02.943Z,1520549522.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:03.296Z,1520549523.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:03.311Z,1520549523.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:03.717Z,1520549523.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:03.742Z,1520549523.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:04.137Z,1520549524.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:04.158Z,1520549524.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:04.171Z,1520549524.171 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T22:52:04.517Z,1520549524.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:04.543Z,1520549524.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:04.907Z,1520549524.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:04.942Z,1520549524.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:05.304Z,1520549525.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:05.319Z,1520549525.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:05.705Z,1520549525.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:05.720Z,1520549525.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:06.110Z,1520549526.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:06.153Z,1520549526.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:06.521Z,1520549526.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:06.545Z,1520549526.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:06.925Z,1520549526.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:06.951Z,1520549526.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:07.321Z,1520549527.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:07.344Z,1520549527.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:07.708Z,1520549527.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:07.723Z,1520549527.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:08.099Z,1520549528.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:08.123Z,1520549528.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:08.512Z,1520549528.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:08.527Z,1520549528.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:08.913Z,1520549528.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:08.955Z,1520549528.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:09.303Z,1520549529.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:09.326Z,1520549529.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:09.721Z,1520549529.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:09.753Z,1520549529.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:10.121Z,1520549530.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:10.149Z,1520549530.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:10.525Z,1520549530.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:10.556Z,1520549530.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:10.908Z,1520549530.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:10.931Z,1520549530.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:11.309Z,1520549531.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:11.324Z,1520549531.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:11.711Z,1520549531.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:11.730Z,1520549531.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:12.111Z,1520549532.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:12.131Z,1520549532.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:12.518Z,1520549532.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:12.534Z,1520549532.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:12.922Z,1520549532.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:12.938Z,1520549532.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:13.317Z,1520549533.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:13.334Z,1520549533.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:13.716Z,1520549533.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:13.731Z,1520549533.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:14.106Z,1520549534.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:14.121Z,1520549534.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:14.507Z,1520549534.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:14.530Z,1520549534.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:14.916Z,1520549534.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:14.931Z,1520549534.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:15.314Z,1520549535.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:15.335Z,1520549535.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:15.719Z,1520549535.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:15.736Z,1520549535.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:16.121Z,1520549536.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:16.137Z,1520549536.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:16.521Z,1520549536.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:16.537Z,1520549536.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:16.915Z,1520549536.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:16.930Z,1520549536.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:17.319Z,1520549537.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:17.335Z,1520549537.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:17.717Z,1520549537.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:17.732Z,1520549537.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:18.105Z,1520549538.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:18.188Z,1520549538.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:18.526Z,1520549538.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:18.542Z,1520549538.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:18.925Z,1520549538.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:18.941Z,1520549538.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:19.321Z,1520549539.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:19.339Z,1520549539.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:19.716Z,1520549539.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:19.731Z,1520549539.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:20.100Z,1520549540.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:20.129Z,1520549540.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:20.498Z,1520549540.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:20.535Z,1520549540.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:20.907Z,1520549540.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:20.987Z,1520549540.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:21.297Z,1520549541.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:21.335Z,1520549541.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:21.726Z,1520549541.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:21.742Z,1520549541.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:22.123Z,1520549542.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:22.158Z,1520549542.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:22.525Z,1520549542.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:22.543Z,1520549542.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:22.902Z,1520549542.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:22.935Z,1520549542.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:23.307Z,1520549543.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:23.340Z,1520549543.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:23.703Z,1520549543.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:23.731Z,1520549543.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:24.106Z,1520549544.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:24.142Z,1520549544.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:24.517Z,1520549544.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:24.551Z,1520549544.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:24.917Z,1520549544.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:24.945Z,1520549544.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:25.314Z,1520549545.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:25.340Z,1520549545.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:25.703Z,1520549545.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:25.742Z,1520549545.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:26.106Z,1520549546.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:26.122Z,1520549546.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:29.246Z,1520549549.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:29.261Z,1520549549.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:29.363Z,1520549549.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:29.399Z,1520549549.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:29.725Z,1520549549.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:29.752Z,1520549549.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:30.122Z,1520549550.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:30.150Z,1520549550.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:30.525Z,1520549550.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:30.552Z,1520549550.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:30.914Z,1520549550.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:30.952Z,1520549550.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:31.310Z,1520549551.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:31.325Z,1520549551.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:31.715Z,1520549551.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:31.731Z,1520549551.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:32.111Z,1520549552.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:32.127Z,1520549552.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:32.525Z,1520549552.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:32.558Z,1520549552.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:32.929Z,1520549552.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:32.958Z,1520549552.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:33.325Z,1520549553.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:33.357Z,1520549553.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:33.711Z,1520549553.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:33.727Z,1520549553.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:34.115Z,1520549554.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:34.131Z,1520549554.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:34.511Z,1520549554.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:34.531Z,1520549554.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:34.925Z,1520549554.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:34.949Z,1520549554.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:35.329Z,1520549555.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:35.358Z,1520549555.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:35.721Z,1520549555.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:35.737Z,1520549555.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:36.115Z,1520549556.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:36.130Z,1520549556.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:36.505Z,1520549556.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:36.534Z,1520549556.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:36.919Z,1520549556.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:36.936Z,1520549556.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:37.310Z,1520549557.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:37.326Z,1520549557.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:37.724Z,1520549557.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:37.740Z,1520549557.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:38.123Z,1520549558.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:38.139Z,1520549558.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:38.521Z,1520549558.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:38.536Z,1520549558.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:38.918Z,1520549558.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:38.939Z,1520549558.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:39.319Z,1520549559.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:39.334Z,1520549559.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:39.706Z,1520549559.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:39.739Z,1520549559.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:40.119Z,1520549560.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:40.135Z,1520549560.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:40.514Z,1520549560.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:40.535Z,1520549560.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:40.921Z,1520549560.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:40.939Z,1520549560.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:41.325Z,1520549561.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:41.341Z,1520549561.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:41.726Z,1520549561.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:41.742Z,1520549561.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:42.119Z,1520549562.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:42.134Z,1520549562.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:42.515Z,1520549562.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:42.535Z,1520549562.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:42.913Z,1520549562.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:42.934Z,1520549562.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:43.310Z,1520549563.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:43.330Z,1520549563.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:43.724Z,1520549563.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:43.739Z,1520549563.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:44.125Z,1520549564.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:44.141Z,1520549564.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:44.522Z,1520549564.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:44.539Z,1520549564.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:44.918Z,1520549564.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:44.939Z,1520549564.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:45.318Z,1520549565.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:45.339Z,1520549565.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:45.719Z,1520549565.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:45.734Z,1520549565.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:46.119Z,1520549566.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:46.135Z,1520549566.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:46.515Z,1520549566.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:46.530Z,1520549566.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:46.922Z,1520549566.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:46.937Z,1520549566.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:47.324Z,1520549567.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:47.340Z,1520549567.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:47.724Z,1520549567.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:47.740Z,1520549567.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:48.111Z,1520549568.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:48.126Z,1520549568.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:48.519Z,1520549568.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:48.535Z,1520549568.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:48.919Z,1520549568.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:48.935Z,1520549568.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:49.313Z,1520549569.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:49.335Z,1520549569.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:49.730Z,1520549569.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:49.751Z,1520549569.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:50.128Z,1520549570.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:50.143Z,1520549570.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:50.529Z,1520549570.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:50.545Z,1520549570.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:50.917Z,1520549570.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:50.936Z,1520549570.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:51.315Z,1520549571.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:51.335Z,1520549571.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:51.702Z,1520549571.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:51.746Z,1520549571.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:52.121Z,1520549572.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:52.137Z,1520549572.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:52.513Z,1520549572.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:52.535Z,1520549572.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:52.921Z,1520549572.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:52.939Z,1520549572.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:53.328Z,1520549573.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:53.350Z,1520549573.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:53.728Z,1520549573.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:53.747Z,1520549573.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:54.116Z,1520549574.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:54.131Z,1520549574.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:54.518Z,1520549574.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:54.534Z,1520549574.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:54.911Z,1520549574.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:54.934Z,1520549574.934 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:54.934Z,1520549574.934 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 302
2018-03-08T22:52:54.934Z,1520549574.934 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T22:52:54.935Z,1520549574.935 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:54.936Z,1520549574.936 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 302
2018-03-08T22:52:54.936Z,1520549574.936 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T22:52:54.938Z,1520549574.938 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:54.938Z,1520549574.938 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 302
2018-03-08T22:52:54.938Z,1520549574.938 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T22:52:54.950Z,1520549574.950 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T22:52:54.950Z,1520549574.950 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T22:52:54.950Z,1520549574.950 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T22:52:55.302Z,1520549575.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:55.348Z,1520549575.348 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T22:52:55.348Z,1520549575.348 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 302
2018-03-08T22:52:55.350Z,1520549575.350 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T22:52:55.350Z,1520549575.350 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 302
2018-03-08T22:52:55.350Z,1520549575.350 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T22:52:55.350Z,1520549575.350 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 302
2018-03-08T22:52:55.728Z,1520549575.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:55.749Z,1520549575.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T22:52:55.750Z,1520549575.750 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:52:55.750Z,1520549575.750 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:52:55.751Z,1520549575.751 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T22:52:55.751Z,1520549575.751 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:52:55.751Z,1520549575.751 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:52:55.752Z,1520549575.752 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T22:52:55.752Z,1520549575.752 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:52:55.753Z,1520549575.753 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:52:56.130Z,1520549576.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:56.150Z,1520549576.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T22:52:56.151Z,1520549576.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:56.513Z,1520549576.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:56.546Z,1520549576.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T22:52:56.547Z,1520549576.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:56.910Z,1520549576.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:56.936Z,1520549576.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T22:52:56.937Z,1520549576.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:57.306Z,1520549577.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:57.338Z,1520549577.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T22:52:57.339Z,1520549577.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:57.707Z,1520549577.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:57.738Z,1520549577.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T22:52:57.739Z,1520549577.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:58.106Z,1520549578.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:58.130Z,1520549578.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T22:52:58.130Z,1520549578.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:58.507Z,1520549578.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:58.542Z,1520549578.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T22:52:58.543Z,1520549578.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:58.924Z,1520549578.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:58.951Z,1520549578.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T22:52:58.952Z,1520549578.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:59.322Z,1520549579.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:59.346Z,1520549579.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T22:52:59.347Z,1520549579.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:52:59.736Z,1520549579.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:52:59.751Z,1520549579.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T22:52:59.752Z,1520549579.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:00.119Z,1520549580.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:00.155Z,1520549580.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T22:53:00.156Z,1520549580.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:00.507Z,1520549580.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:00.523Z,1520549580.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T22:53:00.524Z,1520549580.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:00.916Z,1520549580.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:00.932Z,1520549580.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T22:53:00.949Z,1520549580.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:01.314Z,1520549581.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:01.330Z,1520549581.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T22:53:01.331Z,1520549581.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:01.725Z,1520549581.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:01.759Z,1520549581.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T22:53:01.759Z,1520549581.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:02.125Z,1520549582.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:02.153Z,1520549582.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T22:53:02.154Z,1520549582.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:02.529Z,1520549582.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:02.565Z,1520549582.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T22:53:02.565Z,1520549582.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:02.912Z,1520549582.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:02.928Z,1520549582.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T22:53:02.929Z,1520549582.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:03.312Z,1520549583.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:03.335Z,1520549583.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T22:53:03.336Z,1520549583.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:03.716Z,1520549583.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:03.730Z,1520549583.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T22:53:03.731Z,1520549583.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:04.112Z,1520549584.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:04.127Z,1520549584.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T22:53:04.128Z,1520549584.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:04.515Z,1520549584.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:04.535Z,1520549584.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T22:53:04.535Z,1520549584.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:04.929Z,1520549584.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:04.944Z,1520549584.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T22:53:04.970Z,1520549584.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:05.314Z,1520549585.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:05.335Z,1520549585.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T22:53:05.336Z,1520549585.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:05.729Z,1520549585.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:05.762Z,1520549585.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T22:53:05.763Z,1520549585.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:06.111Z,1520549586.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:06.125Z,1520549586.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T22:53:06.126Z,1520549586.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:06.510Z,1520549586.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:06.539Z,1520549586.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T22:53:06.540Z,1520549586.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:06.918Z,1520549586.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:06.939Z,1520549586.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T22:53:06.939Z,1520549586.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:07.318Z,1520549587.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:07.333Z,1520549587.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T22:53:07.334Z,1520549587.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:07.719Z,1520549587.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:07.736Z,1520549587.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T22:53:07.737Z,1520549587.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:08.121Z,1520549588.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:08.136Z,1520549588.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T22:53:08.137Z,1520549588.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:08.521Z,1520549588.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:08.536Z,1520549588.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T22:53:08.537Z,1520549588.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:08.908Z,1520549588.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:08.930Z,1520549588.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T22:53:08.931Z,1520549588.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:09.318Z,1520549589.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:09.334Z,1520549589.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T22:53:09.334Z,1520549589.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:09.718Z,1520549589.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:09.733Z,1520549589.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T22:53:09.734Z,1520549589.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:10.109Z,1520549590.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:10.130Z,1520549590.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T22:53:10.131Z,1520549590.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:10.518Z,1520549590.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:10.539Z,1520549590.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T22:53:10.539Z,1520549590.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:10.921Z,1520549590.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:10.937Z,1520549590.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T22:53:10.938Z,1520549590.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:11.320Z,1520549591.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:11.335Z,1520549591.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T22:53:11.336Z,1520549591.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:11.721Z,1520549591.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:11.737Z,1520549591.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T22:53:11.738Z,1520549591.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:12.118Z,1520549592.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:12.134Z,1520549592.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T22:53:12.134Z,1520549592.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:12.506Z,1520549592.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:12.533Z,1520549592.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T22:53:12.534Z,1520549592.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:12.919Z,1520549592.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:12.934Z,1520549592.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T22:53:12.935Z,1520549592.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:13.316Z,1520549593.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:13.330Z,1520549593.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T22:53:13.331Z,1520549593.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:13.724Z,1520549593.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:13.739Z,1520549593.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T22:53:13.740Z,1520549593.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:14.125Z,1520549594.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:14.140Z,1520549594.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T22:53:14.141Z,1520549594.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:14.524Z,1520549594.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:14.539Z,1520549594.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T22:53:14.540Z,1520549594.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:14.918Z,1520549594.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:14.939Z,1520549594.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:15.315Z,1520549595.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:15.335Z,1520549595.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:15.719Z,1520549595.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:15.734Z,1520549595.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:16.101Z,1520549596.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:16.135Z,1520549596.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:16.518Z,1520549596.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:16.534Z,1520549596.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:16.925Z,1520549596.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:16.941Z,1520549596.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:17.326Z,1520549597.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:17.341Z,1520549597.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:17.724Z,1520549597.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:17.740Z,1520549597.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:18.116Z,1520549598.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:18.131Z,1520549598.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:18.502Z,1520549598.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:18.535Z,1520549598.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:18.913Z,1520549598.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:18.934Z,1520549598.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:19.315Z,1520549599.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:19.335Z,1520549599.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:19.727Z,1520549599.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:19.743Z,1520549599.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:20.129Z,1520549600.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:20.150Z,1520549600.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:20.528Z,1520549600.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:20.544Z,1520549600.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:20.918Z,1520549600.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:20.939Z,1520549600.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:21.309Z,1520549601.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:21.332Z,1520549601.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:21.714Z,1520549601.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:21.730Z,1520549601.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:22.113Z,1520549602.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:22.129Z,1520549602.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:22.509Z,1520549602.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:22.532Z,1520549602.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:22.929Z,1520549602.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:22.945Z,1520549602.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:23.325Z,1520549603.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:23.341Z,1520549603.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:23.724Z,1520549603.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:23.740Z,1520549603.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:24.102Z,1520549604.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:24.129Z,1520549604.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:24.133Z,1520549604.133 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T22:48:23.8Z
2018-03-08T22:53:24.133Z,1520549604.133 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T22:53:24.133Z,1520549604.133 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T22:53:24.506Z,1520549604.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:24.538Z,1520549604.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:25.019Z,1520549605.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:25.035Z,1520549605.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:25.302Z,1520549605.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:25.328Z,1520549605.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:25.722Z,1520549605.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:25.742Z,1520549605.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:28.830Z,1520549608.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:28.845Z,1520549608.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:28.954Z,1520549608.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:28.985Z,1520549608.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:29.273Z,1520549609.273 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0352.lzma
2018-03-08T22:53:29.306Z,1520549609.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:29.336Z,1520549609.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:29.695Z,1520549609.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:29.720Z,1520549609.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:30.072Z,1520549610.072 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0352.lzma.bak
2018-03-08T22:53:30.072Z,1520549610.072 [DataOverHttps](INFO): SBD MOMSN=7989827
2018-03-08T22:53:30.108Z,1520549610.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:30.123Z,1520549610.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:30.718Z,1520549610.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:30.753Z,1520549610.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:30.910Z,1520549610.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:30.925Z,1520549610.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:34.025Z,1520549614.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:34.059Z,1520549614.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:34.145Z,1520549614.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:34.183Z,1520549614.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:34.518Z,1520549614.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:34.555Z,1520549614.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:34.916Z,1520549614.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:34.932Z,1520549614.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:35.312Z,1520549615.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:35.339Z,1520549615.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:35.721Z,1520549615.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:35.738Z,1520549615.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:36.125Z,1520549616.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:36.140Z,1520549616.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:39.217Z,1520549619.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:39.238Z,1520549619.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:39.341Z,1520549619.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:39.374Z,1520549619.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:39.689Z,1520549619.689 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0353.lzma
2018-03-08T22:53:39.728Z,1520549619.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:39.745Z,1520549619.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:40.107Z,1520549620.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:40.145Z,1520549620.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:40.488Z,1520549620.488 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0353.lzma.bak
2018-03-08T22:53:40.488Z,1520549620.488 [DataOverHttps](INFO): SBD MOMSN=7989829
2018-03-08T22:53:40.530Z,1520549620.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:40.558Z,1520549620.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:41.114Z,1520549621.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:41.135Z,1520549621.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:41.138Z,1520549621.138 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T22:53:41.138Z,1520549621.138 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T22:53:41.138Z,1520549621.138 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T22:53:41.328Z,1520549621.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:41.374Z,1520549621.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:45.810Z,1520549625.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:45.830Z,1520549625.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:45.926Z,1520549625.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:45.960Z,1520549625.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:46.330Z,1520549626.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:46.366Z,1520549626.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:46.722Z,1520549626.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:46.768Z,1520549626.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:47.116Z,1520549627.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:47.145Z,1520549627.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:47.542Z,1520549627.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:47.571Z,1520549627.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:47.927Z,1520549627.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:47.974Z,1520549627.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:48.324Z,1520549628.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:48.344Z,1520549628.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:48.722Z,1520549628.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:48.742Z,1520549628.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:49.125Z,1520549629.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:49.142Z,1520549629.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:49.522Z,1520549629.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:49.566Z,1520549629.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:49.923Z,1520549629.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:49.942Z,1520549629.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:50.323Z,1520549630.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:50.343Z,1520549630.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:50.728Z,1520549630.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:50.743Z,1520549630.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:51.125Z,1520549631.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:51.166Z,1520549631.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:51.525Z,1520549631.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:51.546Z,1520549631.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:51.921Z,1520549631.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:51.942Z,1520549631.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:52.324Z,1520549632.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:52.340Z,1520549632.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:52.723Z,1520549632.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:52.767Z,1520549632.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:53.115Z,1520549633.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:53.130Z,1520549633.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:53.525Z,1520549633.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:53.545Z,1520549633.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:53.927Z,1520549633.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:53.942Z,1520549633.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:54.325Z,1520549634.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:54.366Z,1520549634.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:54.724Z,1520549634.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:54.744Z,1520549634.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:55.122Z,1520549635.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:55.142Z,1520549635.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:55.525Z,1520549635.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:55.541Z,1520549635.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:55.919Z,1520549635.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:55.962Z,1520549635.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:56.323Z,1520549636.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:56.342Z,1520549636.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:56.725Z,1520549636.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:56.746Z,1520549636.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:57.129Z,1520549637.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:57.144Z,1520549637.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:57.526Z,1520549637.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:57.567Z,1520549637.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:57.914Z,1520549637.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:57.934Z,1520549637.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:58.323Z,1520549638.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:58.343Z,1520549638.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:58.716Z,1520549638.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:58.737Z,1520549638.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:59.113Z,1520549639.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:59.162Z,1520549639.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:59.529Z,1520549639.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:59.573Z,1520549639.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:53:59.931Z,1520549639.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:53:59.949Z,1520549639.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:00.329Z,1520549640.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:00.347Z,1520549640.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:00.722Z,1520549640.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:00.766Z,1520549640.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:01.123Z,1520549641.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:01.141Z,1520549641.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:01.522Z,1520549641.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:01.543Z,1520549641.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:01.926Z,1520549641.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:01.942Z,1520549641.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:02.323Z,1520549642.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:02.349Z,1520549642.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:02.727Z,1520549642.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:02.748Z,1520549642.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:03.131Z,1520549643.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:03.148Z,1520549643.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:03.531Z,1520549643.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:03.546Z,1520549643.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:03.922Z,1520549643.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:03.966Z,1520549643.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:04.319Z,1520549644.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:04.335Z,1520549644.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:04.723Z,1520549644.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:04.743Z,1520549644.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:05.126Z,1520549645.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:05.141Z,1520549645.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:05.527Z,1520549645.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:05.567Z,1520549645.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:05.928Z,1520549645.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:05.950Z,1520549645.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:06.330Z,1520549646.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:06.348Z,1520549646.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:06.723Z,1520549646.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:06.750Z,1520549646.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:07.114Z,1520549647.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:07.139Z,1520549647.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:07.512Z,1520549647.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:07.527Z,1520549647.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:07.908Z,1520549647.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:07.988Z,1520549647.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:08.314Z,1520549648.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:08.344Z,1520549648.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:08.725Z,1520549648.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:08.760Z,1520549648.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:09.129Z,1520549649.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:09.149Z,1520549649.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:09.525Z,1520549649.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:09.544Z,1520549649.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:09.914Z,1520549649.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:09.950Z,1520549649.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:10.312Z,1520549650.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:10.348Z,1520549650.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:10.729Z,1520549650.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:10.757Z,1520549650.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:11.112Z,1520549651.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:11.131Z,1520549651.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:11.528Z,1520549651.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:11.577Z,1520549651.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:11.921Z,1520549651.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:11.966Z,1520549651.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:12.321Z,1520549652.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:12.358Z,1520549652.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:12.714Z,1520549652.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:12.753Z,1520549652.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:13.106Z,1520549653.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:13.127Z,1520549653.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:13.514Z,1520549653.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:13.557Z,1520549653.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:13.919Z,1520549653.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:13.934Z,1520549653.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:14.318Z,1520549654.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:14.339Z,1520549654.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:14.732Z,1520549654.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:14.760Z,1520549654.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:15.129Z,1520549655.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:15.166Z,1520549655.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:15.521Z,1520549655.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:15.561Z,1520549655.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:15.919Z,1520549655.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:15.940Z,1520549655.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:16.322Z,1520549656.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:16.339Z,1520549656.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:16.720Z,1520549656.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:16.767Z,1520549656.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:17.120Z,1520549657.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:17.135Z,1520549657.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:17.521Z,1520549657.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:17.541Z,1520549657.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:17.937Z,1520549657.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:17.962Z,1520549657.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:18.333Z,1520549658.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:18.363Z,1520549658.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:18.719Z,1520549658.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:18.734Z,1520549658.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:19.119Z,1520549659.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:19.139Z,1520549659.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:19.522Z,1520549659.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:19.539Z,1520549659.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:19.920Z,1520549659.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:19.970Z,1520549659.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:20.318Z,1520549660.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:20.333Z,1520549660.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:20.736Z,1520549660.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:20.761Z,1520549660.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:21.128Z,1520549661.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:21.143Z,1520549661.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:21.533Z,1520549661.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:21.567Z,1520549661.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:21.920Z,1520549661.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:21.935Z,1520549661.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:22.320Z,1520549662.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:22.340Z,1520549662.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:22.723Z,1520549662.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:22.740Z,1520549662.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:23.120Z,1520549663.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:23.165Z,1520549663.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:23.533Z,1520549663.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:23.567Z,1520549663.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:23.936Z,1520549663.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:23.970Z,1520549663.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:24.327Z,1520549664.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:24.347Z,1520549664.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:24.734Z,1520549664.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:24.774Z,1520549664.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:25.115Z,1520549665.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:25.130Z,1520549665.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:25.518Z,1520549665.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:25.543Z,1520549665.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:25.920Z,1520549665.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:25.939Z,1520549665.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:26.319Z,1520549666.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:26.349Z,1520549666.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:26.740Z,1520549666.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:26.787Z,1520549666.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:27.137Z,1520549667.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:27.183Z,1520549667.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:27.535Z,1520549667.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:27.558Z,1520549667.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:27.922Z,1520549667.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:27.958Z,1520549667.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:28.312Z,1520549668.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:28.342Z,1520549668.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:28.723Z,1520549668.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:28.743Z,1520549668.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:29.126Z,1520549669.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:29.145Z,1520549669.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:29.532Z,1520549669.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:29.573Z,1520549669.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:29.936Z,1520549669.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:29.956Z,1520549669.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:30.321Z,1520549670.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:30.352Z,1520549670.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:30.710Z,1520549670.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:30.747Z,1520549670.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:31.109Z,1520549671.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:31.149Z,1520549671.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:31.514Z,1520549671.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:31.551Z,1520549671.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:31.911Z,1520549671.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:31.951Z,1520549671.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:32.321Z,1520549672.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:32.349Z,1520549672.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:32.735Z,1520549672.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:32.766Z,1520549672.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:33.140Z,1520549673.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:33.158Z,1520549673.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:33.521Z,1520549673.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:33.554Z,1520549673.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:33.920Z,1520549673.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:33.947Z,1520549673.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:34.315Z,1520549674.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:34.355Z,1520549674.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:34.720Z,1520549674.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:34.755Z,1520549674.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:35.113Z,1520549675.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:35.142Z,1520549675.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:35.536Z,1520549675.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:35.560Z,1520549675.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:35.930Z,1520549675.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:35.967Z,1520549675.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:36.330Z,1520549676.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:36.378Z,1520549676.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:36.714Z,1520549676.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:36.758Z,1520549676.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:37.121Z,1520549677.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:37.159Z,1520549677.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:37.507Z,1520549677.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:37.558Z,1520549677.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:37.917Z,1520549677.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:37.932Z,1520549677.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:38.315Z,1520549678.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:38.335Z,1520549678.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:38.731Z,1520549678.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:38.764Z,1520549678.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:39.134Z,1520549679.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:39.166Z,1520549679.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:39.521Z,1520549679.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:39.537Z,1520549679.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:39.920Z,1520549679.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:39.940Z,1520549679.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:40.321Z,1520549680.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:40.339Z,1520549680.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:40.720Z,1520549680.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:40.772Z,1520549680.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:41.111Z,1520549681.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:41.144Z,1520549681.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:41.536Z,1520549681.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:41.567Z,1520549681.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:44.629Z,1520549684.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:44.644Z,1520549684.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:44.757Z,1520549684.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:44.777Z,1520549684.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:45.140Z,1520549685.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:45.159Z,1520549685.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:45.537Z,1520549685.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:45.563Z,1520549685.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:45.942Z,1520549685.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:45.960Z,1520549685.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:46.341Z,1520549686.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:46.356Z,1520549686.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:46.746Z,1520549686.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:46.761Z,1520549686.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:47.140Z,1520549687.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:47.182Z,1520549687.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:47.544Z,1520549687.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:47.582Z,1520549687.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:47.938Z,1520549687.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:47.953Z,1520549687.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:48.328Z,1520549688.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:48.360Z,1520549688.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:48.739Z,1520549688.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:48.777Z,1520549688.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:49.139Z,1520549689.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:49.157Z,1520549689.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.380918 seconds old.
2018-03-08T22:54:49.158Z,1520549689.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:49.158Z,1520549689.158 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.381000 seconds old.
2018-03-08T22:54:49.160Z,1520549689.160 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.381338 seconds old.
2018-03-08T22:54:49.539Z,1520549689.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:49.562Z,1520549689.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.786060 seconds old.
2018-03-08T22:54:49.563Z,1520549689.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:49.564Z,1520549689.564 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.786143 seconds old.
2018-03-08T22:54:49.565Z,1520549689.565 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.786666 seconds old.
2018-03-08T22:54:49.946Z,1520549689.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:49.959Z,1520549689.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.183656 seconds old.
2018-03-08T22:54:49.961Z,1520549689.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:49.961Z,1520549689.961 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.183982 seconds old.
2018-03-08T22:54:49.962Z,1520549689.963 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.184315 seconds old.
2018-03-08T22:54:50.341Z,1520549690.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:50.360Z,1520549690.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.583774 seconds old.
2018-03-08T22:54:50.361Z,1520549690.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:50.361Z,1520549690.361 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.583942 seconds old.
2018-03-08T22:54:50.362Z,1520549690.362 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.584278 seconds old.
2018-03-08T22:54:50.732Z,1520549690.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:50.751Z,1520549690.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.975746 seconds old.
2018-03-08T22:54:50.753Z,1520549690.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:50.754Z,1520549690.754 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.976085 seconds old.
2018-03-08T22:54:50.755Z,1520549690.755 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.976418 seconds old.
2018-03-08T22:54:51.136Z,1520549691.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:51.158Z,1520549691.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.382591 seconds old.
2018-03-08T22:54:51.159Z,1520549691.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:51.160Z,1520549691.160 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.382666 seconds old.
2018-03-08T22:54:51.165Z,1520549691.165 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.387235 seconds old.
2018-03-08T22:54:51.542Z,1520549691.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:51.555Z,1520549691.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.779188 seconds old.
2018-03-08T22:54:51.556Z,1520549691.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:51.557Z,1520549691.557 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.779348 seconds old.
2018-03-08T22:54:51.558Z,1520549691.558 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.779683 seconds old.
2018-03-08T22:54:51.939Z,1520549691.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:51.958Z,1520549691.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.182540 seconds old.
2018-03-08T22:54:51.959Z,1520549691.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:51.960Z,1520549691.960 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.182608 seconds old.
2018-03-08T22:54:51.961Z,1520549691.961 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.183137 seconds old.
2018-03-08T22:54:52.340Z,1520549692.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:52.357Z,1520549692.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.580550 seconds old.
2018-03-08T22:54:52.358Z,1520549692.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:52.358Z,1520549692.358 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.580846 seconds old.
2018-03-08T22:54:52.359Z,1520549692.359 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.581167 seconds old.
2018-03-08T22:54:52.753Z,1520549692.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:52.768Z,1520549692.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.992378 seconds old.
2018-03-08T22:54:52.769Z,1520549692.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:52.770Z,1520549692.770 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.992524 seconds old.
2018-03-08T22:54:52.771Z,1520549692.771 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.992848 seconds old.
2018-03-08T22:54:53.142Z,1520549693.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:53.164Z,1520549693.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.387901 seconds old.
2018-03-08T22:54:53.169Z,1520549693.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:53.177Z,1520549693.177 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.399726 seconds old.
2018-03-08T22:54:53.178Z,1520549693.178 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.400295 seconds old.
2018-03-08T22:54:53.551Z,1520549693.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:53.567Z,1520549693.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.791230 seconds old.
2018-03-08T22:54:53.568Z,1520549693.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:53.569Z,1520549693.569 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.791483 seconds old.
2018-03-08T22:54:53.570Z,1520549693.570 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.791844 seconds old.
2018-03-08T22:54:53.922Z,1520549693.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:53.962Z,1520549693.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.186595 seconds old.
2018-03-08T22:54:53.963Z,1520549693.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:53.964Z,1520549693.964 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.186678 seconds old.
2018-03-08T22:54:53.965Z,1520549693.965 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.187100 seconds old.
2018-03-08T22:54:54.332Z,1520549694.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:54.360Z,1520549694.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:54.730Z,1520549694.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:54.756Z,1520549694.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:55.122Z,1520549695.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:55.163Z,1520549695.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:55.542Z,1520549695.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:55.576Z,1520549695.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:55.956Z,1520549695.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:55.971Z,1520549695.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:56.350Z,1520549696.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:56.370Z,1520549696.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:56.734Z,1520549696.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:56.770Z,1520549696.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:57.134Z,1520549697.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:57.163Z,1520549697.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:57.537Z,1520549697.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:57.563Z,1520549697.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:57.931Z,1520549697.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:57.964Z,1520549697.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:58.334Z,1520549698.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:58.371Z,1520549698.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:58.752Z,1520549698.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:58.768Z,1520549698.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:59.143Z,1520549699.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:59.174Z,1520549699.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:59.555Z,1520549699.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:59.571Z,1520549699.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:54:59.932Z,1520549699.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:54:59.968Z,1520549699.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:00.327Z,1520549700.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:00.364Z,1520549700.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:00.734Z,1520549700.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:00.770Z,1520549700.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:01.138Z,1520549701.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:01.176Z,1520549701.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:01.537Z,1520549701.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:01.573Z,1520549701.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:01.948Z,1520549701.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:01.974Z,1520549701.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:02.348Z,1520549702.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:02.373Z,1520549702.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:02.730Z,1520549702.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:02.750Z,1520549702.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:03.132Z,1520549703.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:03.178Z,1520549703.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:03.531Z,1520549703.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:03.551Z,1520549703.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:03.931Z,1520549703.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:03.949Z,1520549703.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:04.337Z,1520549704.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:04.352Z,1520549704.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:04.751Z,1520549704.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:04.777Z,1520549704.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:05.135Z,1520549705.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:05.155Z,1520549705.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:05.541Z,1520549705.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:05.556Z,1520549705.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:05.941Z,1520549705.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:05.956Z,1520549705.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:06.336Z,1520549706.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:06.378Z,1520549706.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:06.735Z,1520549706.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:06.756Z,1520549706.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:07.138Z,1520549707.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:07.155Z,1520549707.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:07.539Z,1520549707.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:07.555Z,1520549707.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:07.951Z,1520549707.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:07.983Z,1520549707.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:08.338Z,1520549708.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:08.357Z,1520549708.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:08.738Z,1520549708.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:08.753Z,1520549708.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:09.140Z,1520549709.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:09.163Z,1520549709.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:09.538Z,1520549709.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:09.563Z,1520549709.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:09.944Z,1520549709.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:09.961Z,1520549709.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:10.336Z,1520549710.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:10.352Z,1520549710.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:10.746Z,1520549710.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:10.761Z,1520549710.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:11.141Z,1520549711.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:11.181Z,1520549711.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:11.542Z,1520549711.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:11.586Z,1520549711.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:11.938Z,1520549711.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:11.954Z,1520549711.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:12.343Z,1520549712.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:12.358Z,1520549712.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:12.740Z,1520549712.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:12.780Z,1520549712.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:13.136Z,1520549713.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:13.167Z,1520549713.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:13.544Z,1520549713.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:13.568Z,1520549713.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:13.949Z,1520549713.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:13.964Z,1520549713.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:14.345Z,1520549714.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:14.365Z,1520549714.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:14.745Z,1520549714.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:14.761Z,1520549714.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:15.138Z,1520549715.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:15.169Z,1520549715.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:15.543Z,1520549715.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:15.558Z,1520549715.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:15.942Z,1520549715.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:15.978Z,1520549715.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:16.340Z,1520549716.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:16.378Z,1520549716.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:16.755Z,1520549716.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:16.770Z,1520549716.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:17.143Z,1520549717.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:17.166Z,1520549717.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:17.551Z,1520549717.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:17.569Z,1520549717.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:17.930Z,1520549717.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:17.963Z,1520549717.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:18.322Z,1520549718.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:18.358Z,1520549718.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:18.730Z,1520549718.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:18.771Z,1520549718.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:19.130Z,1520549719.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:19.172Z,1520549719.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:19.543Z,1520549719.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:19.589Z,1520549719.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:19.950Z,1520549719.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:19.969Z,1520549719.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:20.343Z,1520549720.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:20.371Z,1520549720.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:20.730Z,1520549720.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:20.775Z,1520549720.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:21.130Z,1520549721.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:21.174Z,1520549721.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:21.545Z,1520549721.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:21.560Z,1520549721.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:21.941Z,1520549721.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:21.957Z,1520549721.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:22.326Z,1520549722.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:22.370Z,1520549722.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:22.754Z,1520549722.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:22.774Z,1520549722.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:23.142Z,1520549723.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:23.162Z,1520549723.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:23.546Z,1520549723.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:23.566Z,1520549723.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:23.930Z,1520549723.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:23.971Z,1520549723.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:24.330Z,1520549724.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:24.378Z,1520549724.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:24.728Z,1520549724.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:24.767Z,1520549724.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:25.133Z,1520549725.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:25.160Z,1520549725.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:25.533Z,1520549725.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:25.578Z,1520549725.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:25.957Z,1520549725.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:26.002Z,1520549726.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:26.353Z,1520549726.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:26.368Z,1520549726.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:26.731Z,1520549726.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:26.757Z,1520549726.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:27.126Z,1520549727.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:27.159Z,1520549727.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:27.530Z,1520549727.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:27.562Z,1520549727.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:27.933Z,1520549727.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:27.961Z,1520549727.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:28.328Z,1520549728.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:28.359Z,1520549728.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:28.733Z,1520549728.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:28.767Z,1520549728.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:29.142Z,1520549729.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:29.178Z,1520549729.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:29.551Z,1520549729.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:29.570Z,1520549729.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:29.925Z,1520549729.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:29.959Z,1520549729.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:30.330Z,1520549730.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:30.374Z,1520549730.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:30.731Z,1520549730.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:30.778Z,1520549730.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:31.128Z,1520549731.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:31.160Z,1520549731.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:31.536Z,1520549731.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:31.570Z,1520549731.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:31.947Z,1520549731.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:31.972Z,1520549731.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:32.351Z,1520549732.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:32.365Z,1520549732.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:32.732Z,1520549732.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:32.766Z,1520549732.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:33.134Z,1520549733.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:33.161Z,1520549733.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:33.526Z,1520549733.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:33.562Z,1520549733.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:33.931Z,1520549733.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:33.963Z,1520549733.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:34.327Z,1520549734.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:34.357Z,1520549734.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:34.743Z,1520549734.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:34.772Z,1520549734.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:35.146Z,1520549735.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:35.167Z,1520549735.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:35.542Z,1520549735.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:35.568Z,1520549735.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:35.929Z,1520549735.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:35.966Z,1520549735.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:36.333Z,1520549736.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:36.366Z,1520549736.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:36.726Z,1520549736.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:36.759Z,1520549736.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:37.126Z,1520549737.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:37.163Z,1520549737.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:37.553Z,1520549737.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:37.568Z,1520549737.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:37.955Z,1520549737.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:37.971Z,1520549737.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:38.361Z,1520549738.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:38.376Z,1520549738.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:38.728Z,1520549738.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:38.769Z,1520549738.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:39.137Z,1520549739.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:39.161Z,1520549739.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:39.538Z,1520549739.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:39.563Z,1520549739.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:39.934Z,1520549739.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:39.970Z,1520549739.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:40.352Z,1520549740.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:40.368Z,1520549740.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:40.754Z,1520549740.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:40.775Z,1520549740.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:41.142Z,1520549741.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:41.167Z,1520549741.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:41.569Z,1520549741.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:41.588Z,1520549741.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:45.831Z,1520549745.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:45.846Z,1520549745.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:45.941Z,1520549745.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:45.964Z,1520549745.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:46.368Z,1520549746.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:46.400Z,1520549746.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:46.745Z,1520549746.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:46.761Z,1520549746.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:47.153Z,1520549747.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:47.190Z,1520549747.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:47.539Z,1520549747.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:47.566Z,1520549747.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:47.928Z,1520549747.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:47.974Z,1520549747.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:48.330Z,1520549748.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:48.378Z,1520549748.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:48.754Z,1520549748.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:48.769Z,1520549748.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:49.153Z,1520549749.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:49.169Z,1520549749.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:49.551Z,1520549749.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:49.570Z,1520549749.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:49.931Z,1520549749.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:49.963Z,1520549749.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:50.329Z,1520549750.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:50.363Z,1520549750.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:50.727Z,1520549750.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:50.759Z,1520549750.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:51.126Z,1520549751.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:51.170Z,1520549751.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:51.556Z,1520549751.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:51.572Z,1520549751.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:51.957Z,1520549751.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:51.972Z,1520549751.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:52.353Z,1520549752.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:52.368Z,1520549752.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:52.730Z,1520549752.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:52.782Z,1520549752.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:53.126Z,1520549753.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:53.174Z,1520549753.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:53.527Z,1520549753.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:53.568Z,1520549753.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:53.929Z,1520549753.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:53.967Z,1520549753.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:54.330Z,1520549754.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:54.378Z,1520549754.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:54.743Z,1520549754.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:54.772Z,1520549754.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:55.143Z,1520549755.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:55.171Z,1520549755.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:55.539Z,1520549755.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:55.565Z,1520549755.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:55.926Z,1520549755.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:55.974Z,1520549755.974 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:55.974Z,1520549755.974 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 303
2018-03-08T22:55:55.974Z,1520549755.974 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T22:55:55.975Z,1520549755.975 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:55.976Z,1520549755.976 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 303
2018-03-08T22:55:55.976Z,1520549755.976 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T22:55:55.977Z,1520549755.977 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:55.978Z,1520549755.978 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 303
2018-03-08T22:55:55.978Z,1520549755.978 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T22:55:55.990Z,1520549755.990 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T22:55:55.990Z,1520549755.990 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T22:55:55.990Z,1520549755.990 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T22:55:56.333Z,1520549756.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:56.370Z,1520549756.370 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T22:55:56.370Z,1520549756.370 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 303
2018-03-08T22:55:56.370Z,1520549756.370 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T22:55:56.370Z,1520549756.370 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 303
2018-03-08T22:55:56.371Z,1520549756.371 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T22:55:56.371Z,1520549756.371 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 303
2018-03-08T22:55:56.734Z,1520549756.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:56.835Z,1520549756.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T22:55:56.835Z,1520549756.835 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:55:56.836Z,1520549756.836 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:55:56.836Z,1520549756.836 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T22:55:56.860Z,1520549756.860 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:55:56.861Z,1520549756.861 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:55:56.861Z,1520549756.861 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T22:55:56.862Z,1520549756.862 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:55:56.862Z,1520549756.862 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:55:57.138Z,1520549757.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:57.162Z,1520549757.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T22:55:57.163Z,1520549757.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:57.554Z,1520549757.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:57.570Z,1520549757.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T22:55:57.571Z,1520549757.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:57.944Z,1520549757.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:57.969Z,1520549757.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T22:55:57.970Z,1520549757.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:58.352Z,1520549758.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:58.367Z,1520549758.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T22:55:58.368Z,1520549758.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:58.761Z,1520549758.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:58.824Z,1520549758.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-03-08T22:55:58.825Z,1520549758.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:59.131Z,1520549759.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:59.169Z,1520549759.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T22:55:59.170Z,1520549759.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:59.534Z,1520549759.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:59.569Z,1520549759.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T22:55:59.570Z,1520549759.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:55:59.942Z,1520549759.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:55:59.966Z,1520549759.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T22:55:59.967Z,1520549759.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:00.338Z,1520549760.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:00.361Z,1520549760.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T22:56:00.362Z,1520549760.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:00.766Z,1520549760.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:00.786Z,1520549760.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T22:56:00.787Z,1520549760.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:01.158Z,1520549761.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:01.174Z,1520549761.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T22:56:01.174Z,1520549761.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:01.544Z,1520549761.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:01.567Z,1520549761.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T22:56:01.568Z,1520549761.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:01.941Z,1520549761.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:01.965Z,1520549761.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T22:56:01.966Z,1520549761.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:02.331Z,1520549762.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:02.367Z,1520549762.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T22:56:02.368Z,1520549762.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:02.734Z,1520549762.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:02.763Z,1520549762.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T22:56:02.764Z,1520549762.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:03.137Z,1520549763.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:03.161Z,1520549763.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T22:56:03.162Z,1520549763.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:03.551Z,1520549763.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:03.566Z,1520549763.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T22:56:03.566Z,1520549763.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:03.959Z,1520549763.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:03.982Z,1520549763.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T22:56:03.983Z,1520549763.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:04.342Z,1520549764.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:04.367Z,1520549764.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T22:56:04.369Z,1520549764.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:04.734Z,1520549764.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:04.767Z,1520549764.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T22:56:04.768Z,1520549764.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:05.137Z,1520549765.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:05.160Z,1520549765.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T22:56:05.161Z,1520549765.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:05.534Z,1520549765.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:05.570Z,1520549765.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T22:56:05.571Z,1520549765.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:05.932Z,1520549765.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:05.971Z,1520549765.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T22:56:05.971Z,1520549765.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:06.328Z,1520549766.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:06.363Z,1520549766.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T22:56:06.364Z,1520549766.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:06.756Z,1520549766.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:06.778Z,1520549766.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T22:56:06.779Z,1520549766.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:07.154Z,1520549767.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:07.170Z,1520549767.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T22:56:07.171Z,1520549767.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:07.554Z,1520549767.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:07.574Z,1520549767.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T22:56:07.575Z,1520549767.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:07.937Z,1520549767.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:07.960Z,1520549767.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T22:56:07.961Z,1520549767.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:08.334Z,1520549768.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:08.361Z,1520549768.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T22:56:08.362Z,1520549768.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:08.735Z,1520549768.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:08.777Z,1520549768.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T22:56:08.778Z,1520549768.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:09.134Z,1520549769.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:09.167Z,1520549769.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T22:56:09.168Z,1520549769.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:09.547Z,1520549769.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:09.571Z,1520549769.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T22:56:09.571Z,1520549769.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:09.955Z,1520549769.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:09.970Z,1520549769.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T22:56:09.971Z,1520549769.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:10.345Z,1520549770.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:10.382Z,1520549770.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T22:56:10.383Z,1520549770.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:10.734Z,1520549770.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:10.769Z,1520549770.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T22:56:10.769Z,1520549770.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:11.137Z,1520549771.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:11.174Z,1520549771.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T22:56:11.175Z,1520549771.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:11.538Z,1520549771.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:11.572Z,1520549771.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T22:56:11.573Z,1520549771.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:11.935Z,1520549771.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:11.971Z,1520549771.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T22:56:11.972Z,1520549771.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:12.334Z,1520549772.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:12.370Z,1520549772.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T22:56:12.371Z,1520549772.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:12.750Z,1520549772.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:12.778Z,1520549772.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T22:56:12.779Z,1520549772.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:13.144Z,1520549773.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:13.179Z,1520549773.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T22:56:13.180Z,1520549773.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:13.545Z,1520549773.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:13.575Z,1520549773.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T22:56:13.576Z,1520549773.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:13.931Z,1520549773.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:13.978Z,1520549773.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T22:56:13.978Z,1520549773.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:14.335Z,1520549774.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:14.372Z,1520549774.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T22:56:14.373Z,1520549774.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:14.739Z,1520549774.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:14.774Z,1520549774.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T22:56:14.775Z,1520549774.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:15.136Z,1520549775.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:15.178Z,1520549775.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T22:56:15.179Z,1520549775.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:15.543Z,1520549775.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:15.560Z,1520549775.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T22:56:15.581Z,1520549775.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:15.950Z,1520549775.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:15.982Z,1520549775.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:16.340Z,1520549776.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:16.359Z,1520549776.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:16.739Z,1520549776.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:16.763Z,1520549776.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:17.140Z,1520549777.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:17.159Z,1520549777.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:17.537Z,1520549777.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:17.552Z,1520549777.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:17.935Z,1520549777.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:17.970Z,1520549777.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:18.338Z,1520549778.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:18.374Z,1520549778.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:18.751Z,1520549778.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:18.766Z,1520549778.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.392280 seconds old.
2018-03-08T22:56:18.767Z,1520549778.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:18.768Z,1520549778.768 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.392608 seconds old.
2018-03-08T22:56:18.769Z,1520549778.769 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.393146 seconds old.
2018-03-08T22:56:19.157Z,1520549779.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:19.170Z,1520549779.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.796654 seconds old.
2018-03-08T22:56:19.171Z,1520549779.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:19.172Z,1520549779.172 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.796983 seconds old.
2018-03-08T22:56:19.173Z,1520549779.173 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.797418 seconds old.
2018-03-08T22:56:19.545Z,1520549779.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:19.567Z,1520549779.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.193712 seconds old.
2018-03-08T22:56:19.573Z,1520549779.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:19.574Z,1520549779.574 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.198425 seconds old.
2018-03-08T22:56:19.575Z,1520549779.575 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.198798 seconds old.
2018-03-08T22:56:19.931Z,1520549779.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:19.962Z,1520549779.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.588480 seconds old.
2018-03-08T22:56:19.963Z,1520549779.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:19.964Z,1520549779.964 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.588817 seconds old.
2018-03-08T22:56:19.965Z,1520549779.965 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.589377 seconds old.
2018-03-08T22:56:20.327Z,1520549780.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:20.369Z,1520549780.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:20.730Z,1520549780.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:20.765Z,1520549780.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:21.133Z,1520549781.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:21.148Z,1520549781.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:21.518Z,1520549781.518 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T22:56:21.518Z,1520549781.518 [NAL9602] Data Fault, FailCount= 4
2018-03-08T22:56:21.518Z,1520549781.518 [NAL9602](ERROR): Data Fault
2018-03-08T22:56:21.535Z,1520549781.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:21.587Z,1520549781.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:21.600Z,1520549781.600 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T22:56:21.915Z,1520549781.915 [NAL9602](INFO): Powering down
2018-03-08T22:56:21.932Z,1520549781.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:21.953Z,1520549781.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:22.334Z,1520549782.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:22.359Z,1520549782.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:22.739Z,1520549782.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:22.754Z,1520549782.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:22.802Z,1520549782.802 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T22:56:22.802Z,1520549782.802 [NAL9602] No Fault, FailCount= 4
2018-03-08T22:56:23.135Z,1520549783.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:23.178Z,1520549783.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:23.532Z,1520549783.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:23.562Z,1520549783.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:23.939Z,1520549783.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:23.955Z,1520549783.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:24.342Z,1520549784.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:24.358Z,1520549784.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:24.732Z,1520549784.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:24.767Z,1520549784.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:25.139Z,1520549785.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:25.158Z,1520549785.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:25.537Z,1520549785.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:25.552Z,1520549785.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:25.943Z,1520549785.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:25.966Z,1520549785.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:26.339Z,1520549786.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:26.363Z,1520549786.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:26.739Z,1520549786.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:26.758Z,1520549786.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:27.141Z,1520549787.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:27.157Z,1520549787.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:27.540Z,1520549787.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:27.555Z,1520549787.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:27.939Z,1520549787.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:27.986Z,1520549787.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:28.341Z,1520549788.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:28.358Z,1520549788.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.372453 seconds old.
2018-03-08T22:56:28.359Z,1520549788.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:28.360Z,1520549788.360 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.372755 seconds old.
2018-03-08T22:56:28.361Z,1520549788.361 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.373315 seconds old.
2018-03-08T22:56:28.745Z,1520549788.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:28.758Z,1520549788.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.772712 seconds old.
2018-03-08T22:56:28.759Z,1520549788.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:28.760Z,1520549788.760 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.773011 seconds old.
2018-03-08T22:56:28.761Z,1520549788.761 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.773448 seconds old.
2018-03-08T22:56:29.133Z,1520549789.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:29.152Z,1520549789.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.165944 seconds old.
2018-03-08T22:56:29.153Z,1520549789.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:29.154Z,1520549789.154 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.166507 seconds old.
2018-03-08T22:56:29.155Z,1520549789.155 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.166848 seconds old.
2018-03-08T22:56:29.530Z,1520549789.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:29.569Z,1520549789.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.583389 seconds old.
2018-03-08T22:56:29.570Z,1520549789.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:29.571Z,1520549789.571 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.583701 seconds old.
2018-03-08T22:56:29.572Z,1520549789.572 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.584029 seconds old.
2018-03-08T22:56:29.940Z,1520549789.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:29.958Z,1520549789.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:30.320Z,1520549790.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:30.354Z,1520549790.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:30.743Z,1520549790.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:30.759Z,1520549790.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:31.133Z,1520549791.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:31.161Z,1520549791.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:31.523Z,1520549791.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:31.555Z,1520549791.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:31.942Z,1520549791.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:31.958Z,1520549791.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:32.337Z,1520549792.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:32.352Z,1520549792.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:32.738Z,1520549792.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:32.787Z,1520549792.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:33.133Z,1520549793.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:33.153Z,1520549793.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:33.539Z,1520549793.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:33.554Z,1520549793.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:33.942Z,1520549793.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:33.957Z,1520549793.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:34.333Z,1520549794.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:34.366Z,1520549794.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:34.738Z,1520549794.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:34.757Z,1520549794.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:35.123Z,1520549795.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:35.161Z,1520549795.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:35.541Z,1520549795.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:35.557Z,1520549795.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:35.926Z,1520549795.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:35.963Z,1520549795.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:36.326Z,1520549796.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:36.356Z,1520549796.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:36.725Z,1520549796.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:36.755Z,1520549796.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:37.128Z,1520549797.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:37.155Z,1520549797.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:37.523Z,1520549797.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:37.556Z,1520549797.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:37.925Z,1520549797.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:37.963Z,1520549797.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:38.328Z,1520549798.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:38.359Z,1520549798.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:38.733Z,1520549798.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:38.759Z,1520549798.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:39.125Z,1520549799.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:39.162Z,1520549799.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:39.526Z,1520549799.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:39.567Z,1520549799.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:39.931Z,1520549799.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:39.960Z,1520549799.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:40.330Z,1520549800.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:40.356Z,1520549800.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:40.722Z,1520549800.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:40.763Z,1520549800.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:41.119Z,1520549801.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:41.135Z,1520549801.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:41.526Z,1520549801.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:41.558Z,1520549801.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:41.933Z,1520549801.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:41.967Z,1520549801.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:45.913Z,1520549805.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:45.929Z,1520549805.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:46.026Z,1520549806.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:46.047Z,1520549806.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:46.415Z,1520549806.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:46.429Z,1520549806.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:46.809Z,1520549806.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:46.825Z,1520549806.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:47.218Z,1520549807.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:47.233Z,1520549807.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:47.613Z,1520549807.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:47.628Z,1520549807.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:47.999Z,1520549807.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:48.027Z,1520549808.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:48.413Z,1520549808.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:48.428Z,1520549808.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:48.813Z,1520549808.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:48.828Z,1520549808.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:49.200Z,1520549809.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:49.228Z,1520549809.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:49.606Z,1520549809.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:49.631Z,1520549809.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:50.006Z,1520549810.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:50.032Z,1520549810.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:50.406Z,1520549810.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:50.432Z,1520549810.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:50.802Z,1520549810.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:50.827Z,1520549810.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:51.207Z,1520549811.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:51.233Z,1520549811.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:51.596Z,1520549811.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:51.619Z,1520549811.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:51.982Z,1520549811.982 [NAL9602](INFO): Powering up NAL9602
2018-03-08T22:56:51.999Z,1520549811.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:52.037Z,1520549812.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:52.406Z,1520549812.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:52.432Z,1520549812.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:52.799Z,1520549812.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:52.827Z,1520549812.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:53.206Z,1520549813.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:53.238Z,1520549813.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:53.606Z,1520549813.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:53.639Z,1520549813.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:53.999Z,1520549813.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:54.015Z,1520549814.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:54.402Z,1520549814.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:54.416Z,1520549814.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:54.806Z,1520549814.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:54.849Z,1520549814.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:55.197Z,1520549815.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:55.212Z,1520549815.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:55.602Z,1520549815.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:55.616Z,1520549815.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:56.010Z,1520549816.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:56.050Z,1520549816.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:56.406Z,1520549816.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:56.421Z,1520549816.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:56.804Z,1520549816.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:56.819Z,1520549816.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:57.210Z,1520549817.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:57.225Z,1520549817.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:57.599Z,1520549817.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:57.614Z,1520549817.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:58.010Z,1520549818.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:58.024Z,1520549818.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:58.406Z,1520549818.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:58.426Z,1520549818.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:58.799Z,1520549818.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:58.815Z,1520549818.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:59.222Z,1520549819.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:59.245Z,1520549819.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:56:59.603Z,1520549819.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:56:59.619Z,1520549819.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:00.007Z,1520549820.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:00.022Z,1520549820.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:00.410Z,1520549820.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:00.424Z,1520549820.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:00.803Z,1520549820.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:00.819Z,1520549820.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:01.207Z,1520549821.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:01.222Z,1520549821.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:01.604Z,1520549821.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:01.619Z,1520549821.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:02.002Z,1520549822.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:02.022Z,1520549822.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:02.421Z,1520549822.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:02.453Z,1520549822.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:02.798Z,1520549822.798 [NAL9602](INFO): NAL9602 initialized
2018-03-08T22:57:02.814Z,1520549822.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:02.854Z,1520549822.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:03.212Z,1520549823.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:03.227Z,1520549823.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:03.614Z,1520549823.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:03.630Z,1520549823.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:04.025Z,1520549824.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:04.055Z,1520549824.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:04.417Z,1520549824.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:04.433Z,1520549824.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:04.812Z,1520549824.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:04.827Z,1520549824.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:05.211Z,1520549825.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:05.231Z,1520549825.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:05.613Z,1520549825.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:05.634Z,1520549825.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:06.010Z,1520549826.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:06.025Z,1520549826.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:06.425Z,1520549826.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:06.461Z,1520549826.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:06.821Z,1520549826.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:06.836Z,1520549826.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:07.218Z,1520549827.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:07.233Z,1520549827.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:07.611Z,1520549827.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:07.626Z,1520549827.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:08.015Z,1520549828.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:08.031Z,1520549828.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:08.417Z,1520549828.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:08.432Z,1520549828.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:08.822Z,1520549828.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:08.837Z,1520549828.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:09.217Z,1520549829.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:09.233Z,1520549829.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:09.610Z,1520549829.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:09.626Z,1520549829.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:10.015Z,1520549830.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:10.031Z,1520549830.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:10.411Z,1520549830.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:10.427Z,1520549830.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:10.817Z,1520549830.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:10.833Z,1520549830.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:11.221Z,1520549831.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:11.236Z,1520549831.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:11.617Z,1520549831.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:11.633Z,1520549831.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:12.011Z,1520549832.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:12.026Z,1520549832.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:12.417Z,1520549832.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:12.432Z,1520549832.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:12.813Z,1520549832.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:12.829Z,1520549832.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:13.215Z,1520549833.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:13.230Z,1520549833.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:13.243Z,1520549833.243 [CBIT](INFO): Clearing failed state for component DropWeight
2018-03-08T22:57:13.243Z,1520549833.243 [DropWeight] No Fault, FailCount= 1
2018-03-08T22:57:13.616Z,1520549833.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:13.631Z,1520549833.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:14.022Z,1520549834.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:14.037Z,1520549834.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:14.416Z,1520549834.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:14.431Z,1520549834.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:14.809Z,1520549834.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:14.825Z,1520549834.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:15.207Z,1520549835.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:15.224Z,1520549835.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:15.601Z,1520549835.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:15.629Z,1520549835.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:16.016Z,1520549836.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:16.032Z,1520549836.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:16.411Z,1520549836.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:16.426Z,1520549836.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:16.817Z,1520549836.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:16.832Z,1520549836.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:17.253Z,1520549837.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:17.268Z,1520549837.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:17.620Z,1520549837.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:17.635Z,1520549837.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:18.016Z,1520549838.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:18.031Z,1520549838.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:18.414Z,1520549838.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:18.434Z,1520549838.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:18.816Z,1520549838.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:18.831Z,1520549838.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:19.215Z,1520549839.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:19.230Z,1520549839.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:19.620Z,1520549839.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:19.635Z,1520549839.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:20.022Z,1520549840.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:20.037Z,1520549840.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:20.420Z,1520549840.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:20.443Z,1520549840.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:20.812Z,1520549840.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:20.827Z,1520549840.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:21.211Z,1520549841.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:21.226Z,1520549841.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:21.615Z,1520549841.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:21.630Z,1520549841.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:22.011Z,1520549842.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:22.027Z,1520549842.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:22.411Z,1520549842.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:22.426Z,1520549842.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:22.818Z,1520549842.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:22.839Z,1520549842.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:23.221Z,1520549843.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:23.243Z,1520549843.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:23.620Z,1520549843.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:23.635Z,1520549843.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:24.015Z,1520549844.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:24.034Z,1520549844.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:24.414Z,1520549844.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:24.429Z,1520549844.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:24.812Z,1520549844.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:24.834Z,1520549844.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:25.214Z,1520549845.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:25.230Z,1520549845.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:25.620Z,1520549845.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:25.636Z,1520549845.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:26.020Z,1520549846.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:26.035Z,1520549846.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:26.420Z,1520549846.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:26.435Z,1520549846.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:26.814Z,1520549846.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:26.831Z,1520549846.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:27.211Z,1520549847.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:27.226Z,1520549847.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:27.615Z,1520549847.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:27.630Z,1520549847.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:28.009Z,1520549848.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:28.037Z,1520549848.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:28.415Z,1520549848.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:28.430Z,1520549848.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:28.825Z,1520549848.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:28.840Z,1520549848.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:29.225Z,1520549849.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:29.243Z,1520549849.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:29.626Z,1520549849.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:29.641Z,1520549849.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:30.015Z,1520549850.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:30.034Z,1520549850.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:30.403Z,1520549850.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:30.439Z,1520549850.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:30.807Z,1520549850.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:30.835Z,1520549850.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:31.207Z,1520549851.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:31.233Z,1520549851.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:31.622Z,1520549851.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:31.638Z,1520549851.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:32.021Z,1520549852.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:32.036Z,1520549852.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:32.426Z,1520549852.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:32.441Z,1520549852.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:32.803Z,1520549852.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:32.829Z,1520549852.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:33.198Z,1520549853.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:33.235Z,1520549853.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:33.607Z,1520549853.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:33.633Z,1520549853.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:34.002Z,1520549854.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:34.028Z,1520549854.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:34.399Z,1520549854.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:34.432Z,1520549854.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:34.825Z,1520549854.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:34.841Z,1520549854.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:35.225Z,1520549855.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:35.240Z,1520549855.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:35.616Z,1520549855.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:35.647Z,1520549855.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:36.007Z,1520549856.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:36.033Z,1520549856.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:36.402Z,1520549856.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:36.435Z,1520549856.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:36.803Z,1520549856.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:36.831Z,1520549856.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:37.207Z,1520549857.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:37.233Z,1520549857.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:37.621Z,1520549857.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:37.637Z,1520549857.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:38.025Z,1520549858.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:38.040Z,1520549858.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:38.425Z,1520549858.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:38.441Z,1520549858.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:38.802Z,1520549858.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:38.829Z,1520549858.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:39.199Z,1520549859.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:39.236Z,1520549859.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:39.603Z,1520549859.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:39.629Z,1520549859.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:40.008Z,1520549860.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:40.034Z,1520549860.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:40.399Z,1520549860.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:40.431Z,1520549860.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:40.825Z,1520549860.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:40.841Z,1520549860.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:41.225Z,1520549861.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:41.246Z,1520549861.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:41.625Z,1520549861.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:41.641Z,1520549861.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:42.022Z,1520549862.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:42.042Z,1520549862.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:48.253Z,1520549868.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:48.289Z,1520549868.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:48.386Z,1520549868.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:48.437Z,1520549868.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:48.812Z,1520549868.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:48.847Z,1520549868.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:49.198Z,1520549869.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:49.218Z,1520549869.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:49.604Z,1520549869.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:49.644Z,1520549869.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:49.994Z,1520549869.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:50.039Z,1520549870.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:50.392Z,1520549870.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:50.444Z,1520549870.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:50.795Z,1520549870.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:50.819Z,1520549870.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:51.191Z,1520549871.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:51.207Z,1520549871.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:51.605Z,1520549871.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:51.621Z,1520549871.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:52.004Z,1520549872.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:52.026Z,1520549872.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:52.397Z,1520549872.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:52.421Z,1520549872.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:52.783Z,1520549872.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:52.815Z,1520549872.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:53.183Z,1520549873.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:53.214Z,1520549873.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:53.588Z,1520549873.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:53.623Z,1520549873.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:53.987Z,1520549873.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:54.026Z,1520549874.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:54.410Z,1520549874.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:54.426Z,1520549874.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:54.810Z,1520549874.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:54.825Z,1520549874.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:55.197Z,1520549875.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:55.230Z,1520549875.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:55.583Z,1520549875.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:55.598Z,1520549875.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:56.024Z,1520549876.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:56.050Z,1520549876.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:56.387Z,1520549876.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:56.402Z,1520549876.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:56.801Z,1520549876.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:56.830Z,1520549876.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:57.225Z,1520549877.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:57.254Z,1520549877.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:57.605Z,1520549877.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:57.620Z,1520549877.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:57.989Z,1520549877.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:58.009Z,1520549878.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:58.391Z,1520549878.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:58.411Z,1520549878.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:58.793Z,1520549878.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:58.808Z,1520549878.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:59.195Z,1520549879.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:59.218Z,1520549879.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:57:59.605Z,1520549879.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:57:59.670Z,1520549879.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:00.002Z,1520549880.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:00.017Z,1520549880.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:00.405Z,1520549880.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:00.426Z,1520549880.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:00.795Z,1520549880.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:00.814Z,1520549880.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:01.193Z,1520549881.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:01.208Z,1520549881.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:01.597Z,1520549881.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:01.612Z,1520549881.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:01.991Z,1520549881.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:02.010Z,1520549882.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:02.404Z,1520549882.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:02.420Z,1520549882.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:02.804Z,1520549882.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:02.826Z,1520549882.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:03.205Z,1520549883.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:03.226Z,1520549883.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:03.597Z,1520549883.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:03.612Z,1520549883.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:03.997Z,1520549883.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:04.012Z,1520549884.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:04.391Z,1520549884.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:04.410Z,1520549884.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:04.805Z,1520549884.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:04.820Z,1520549884.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:05.204Z,1520549885.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:05.220Z,1520549885.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:05.605Z,1520549885.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:05.620Z,1520549885.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:05.994Z,1520549885.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:06.009Z,1520549886.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:06.391Z,1520549886.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:06.406Z,1520549886.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:06.788Z,1520549886.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:06.822Z,1520549886.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:07.196Z,1520549887.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:07.211Z,1520549887.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:07.605Z,1520549887.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:07.620Z,1520549887.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:08.006Z,1520549888.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:08.021Z,1520549888.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:08.402Z,1520549888.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:08.417Z,1520549888.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:08.791Z,1520549888.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:08.810Z,1520549888.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:09.187Z,1520549889.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:09.210Z,1520549889.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:09.591Z,1520549889.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:09.606Z,1520549889.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:09.991Z,1520549889.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:10.012Z,1520549890.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:10.395Z,1520549890.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:10.414Z,1520549890.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:10.805Z,1520549890.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:10.821Z,1520549890.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:11.204Z,1520549891.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:11.226Z,1520549891.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:11.604Z,1520549891.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:11.626Z,1520549891.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:11.995Z,1520549891.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:12.010Z,1520549892.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:12.395Z,1520549892.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:12.414Z,1520549892.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:12.791Z,1520549892.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:12.812Z,1520549892.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:13.179Z,1520549893.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:13.214Z,1520549893.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:13.605Z,1520549893.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:13.620Z,1520549893.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:14.004Z,1520549894.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:14.019Z,1520549894.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:14.405Z,1520549894.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:14.420Z,1520549894.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:14.796Z,1520549894.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:14.811Z,1520549894.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:15.201Z,1520549895.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:15.219Z,1520549895.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:15.596Z,1520549895.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:15.611Z,1520549895.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:15.997Z,1520549895.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:16.012Z,1520549896.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:16.391Z,1520549896.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:16.410Z,1520549896.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:16.805Z,1520549896.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:16.821Z,1520549896.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:17.204Z,1520549897.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:17.220Z,1520549897.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:17.605Z,1520549897.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:17.620Z,1520549897.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:17.996Z,1520549897.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:18.011Z,1520549898.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:18.395Z,1520549898.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:18.414Z,1520549898.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:18.791Z,1520549898.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:18.811Z,1520549898.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:19.179Z,1520549899.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:19.206Z,1520549899.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:19.606Z,1520549899.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:19.626Z,1520549899.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:20.005Z,1520549900.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:20.020Z,1520549900.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:20.406Z,1520549900.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:20.421Z,1520549900.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:20.792Z,1520549900.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:20.807Z,1520549900.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:21.209Z,1520549901.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:21.249Z,1520549901.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:21.584Z,1520549901.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:21.626Z,1520549901.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:22.005Z,1520549902.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:22.021Z,1520549902.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:22.384Z,1520549902.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:22.411Z,1520549902.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:22.806Z,1520549902.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:22.821Z,1520549902.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:23.209Z,1520549903.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:23.224Z,1520549903.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:23.603Z,1520549903.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:23.618Z,1520549903.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:23.983Z,1520549903.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:24.020Z,1520549904.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:24.388Z,1520549904.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:24.416Z,1520549904.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:24.802Z,1520549904.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:24.817Z,1520549904.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:25.183Z,1520549905.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:25.218Z,1520549905.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:25.606Z,1520549905.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:25.622Z,1520549905.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:26.004Z,1520549906.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:26.026Z,1520549906.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:26.404Z,1520549906.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:26.434Z,1520549906.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:26.787Z,1520549906.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:26.814Z,1520549906.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:27.186Z,1520549907.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:27.214Z,1520549907.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:27.579Z,1520549907.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:27.613Z,1520549907.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:27.985Z,1520549907.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:28.012Z,1520549908.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:28.383Z,1520549908.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:28.414Z,1520549908.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:28.808Z,1520549908.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:28.823Z,1520549908.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:29.194Z,1520549909.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:29.231Z,1520549909.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:29.605Z,1520549909.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:29.625Z,1520549909.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:29.983Z,1520549909.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:30.019Z,1520549910.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:30.387Z,1520549910.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:30.426Z,1520549910.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:30.784Z,1520549910.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:30.812Z,1520549910.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:31.186Z,1520549911.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:31.227Z,1520549911.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:31.593Z,1520549911.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:31.621Z,1520549911.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:31.997Z,1520549911.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:32.033Z,1520549912.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:32.396Z,1520549912.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:32.426Z,1520549912.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:32.783Z,1520549912.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:32.822Z,1520549912.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:33.186Z,1520549913.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:33.226Z,1520549913.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:33.586Z,1520549913.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:33.601Z,1520549913.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:33.985Z,1520549913.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:33.000Z,1520549914.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:34.391Z,1520549914.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:34.405Z,1520549914.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:34.801Z,1520549914.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:34.836Z,1520549914.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:35.197Z,1520549915.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:35.229Z,1520549915.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:35.605Z,1520549915.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:35.634Z,1520549915.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:35.991Z,1520549915.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:36.006Z,1520549916.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:36.386Z,1520549916.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:36.405Z,1520549916.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:36.788Z,1520549916.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:36.812Z,1520549916.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:37.191Z,1520549917.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:37.206Z,1520549917.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:37.593Z,1520549917.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:37.609Z,1520549917.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:38.005Z,1520549918.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:38.035Z,1520549918.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:38.401Z,1520549918.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:38.433Z,1520549918.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:38.786Z,1520549918.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:38.806Z,1520549918.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:39.191Z,1520549919.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:39.215Z,1520549919.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:39.592Z,1520549919.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:39.607Z,1520549919.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:39.993Z,1520549919.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:40.008Z,1520549920.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:40.390Z,1520549920.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:40.405Z,1520549920.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:40.806Z,1520549920.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:40.843Z,1520549920.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:41.192Z,1520549921.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:41.207Z,1520549921.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:41.593Z,1520549921.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:41.609Z,1520549921.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:41.612Z,1520549921.612 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T22:58:41.612Z,1520549921.612 [Default:CheckIn:C.Wait] Stopped
2018-03-08T22:58:41.612Z,1520549921.612 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T22:58:41.612Z,1520549921.612 [Default:CheckIn:D] Running Loop=1
2018-03-08T22:58:41.991Z,1520549921.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:42.006Z,1520549922.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:42.010Z,1520549922.010 [Default:CheckIn:D] Stopped
2018-03-08T22:58:42.010Z,1520549922.010 [Default:CheckIn:E] Running Loop=1
2018-03-08T22:58:42.396Z,1520549922.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:42.442Z,1520549922.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:42.445Z,1520549922.445 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 912.953385 min 
2018-03-08T22:58:42.445Z,1520549922.445 [Default:CheckIn:E] Stopped
2018-03-08T22:58:42.445Z,1520549922.445 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T22:58:42.445Z,1520549922.445 [Default:CheckIn] Stopped
2018-03-08T22:58:42.445Z,1520549922.445 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T22:58:42.445Z,1520549922.445 [Default:CheckIn](INFO): Running loop #89
2018-03-08T22:58:42.445Z,1520549922.445 [Default:CheckIn] Running Loop=89
2018-03-08T22:58:42.445Z,1520549922.445 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T22:58:42.446Z,1520549922.446 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T22:58:45.513Z,1520549925.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:45.537Z,1520549925.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:45.635Z,1520549925.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:45.654Z,1520549925.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:46.013Z,1520549926.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:46.035Z,1520549926.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:46.401Z,1520549926.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:46.416Z,1520549926.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:46.801Z,1520549926.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:46.817Z,1520549926.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:47.196Z,1520549927.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:47.211Z,1520549927.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:47.597Z,1520549927.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:47.612Z,1520549927.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:47.995Z,1520549927.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:48.015Z,1520549928.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:48.409Z,1520549928.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:48.440Z,1520549928.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:48.809Z,1520549928.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:48.841Z,1520549928.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:49.196Z,1520549929.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:49.211Z,1520549929.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:49.597Z,1520549929.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:49.613Z,1520549929.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:49.995Z,1520549929.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:50.010Z,1520549930.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:50.397Z,1520549930.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:50.413Z,1520549930.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:50.809Z,1520549930.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:50.844Z,1520549930.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:51.209Z,1520549931.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:51.244Z,1520549931.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:51.592Z,1520549931.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:51.607Z,1520549931.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:51.997Z,1520549931.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:52.012Z,1520549932.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:52.397Z,1520549932.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:52.414Z,1520549932.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:52.809Z,1520549932.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:52.841Z,1520549932.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:53.205Z,1520549933.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:53.226Z,1520549933.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:53.605Z,1520549933.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:53.626Z,1520549933.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:53.989Z,1520549933.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:54.007Z,1520549934.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:54.394Z,1520549934.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:54.411Z,1520549934.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:54.801Z,1520549934.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:54.817Z,1520549934.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:55.192Z,1520549935.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:55.215Z,1520549935.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:55.604Z,1520549935.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:55.627Z,1520549935.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:56.005Z,1520549936.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:56.026Z,1520549936.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:56.400Z,1520549936.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:56.416Z,1520549936.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:56.799Z,1520549936.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:56.815Z,1520549936.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:57.193Z,1520549937.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:57.221Z,1520549937.221 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:57.221Z,1520549937.221 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 304
2018-03-08T22:58:57.221Z,1520549937.221 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T22:58:57.223Z,1520549937.223 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:57.223Z,1520549937.223 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 304
2018-03-08T22:58:57.223Z,1520549937.223 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T22:58:57.229Z,1520549937.229 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:57.229Z,1520549937.229 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 304
2018-03-08T22:58:57.229Z,1520549937.229 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T22:58:57.253Z,1520549937.253 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T22:58:57.253Z,1520549937.253 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T22:58:57.254Z,1520549937.254 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T22:58:57.583Z,1520549937.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:57.625Z,1520549937.625 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T22:58:57.625Z,1520549937.625 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 304
2018-03-08T22:58:57.625Z,1520549937.625 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T22:58:57.625Z,1520549937.625 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 304
2018-03-08T22:58:57.626Z,1520549937.626 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T22:58:57.626Z,1520549937.626 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 304
2018-03-08T22:58:57.992Z,1520549937.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:58.014Z,1520549938.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T22:58:58.015Z,1520549938.015 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:58:58.015Z,1520549938.015 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:58:58.015Z,1520549938.015 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T22:58:58.016Z,1520549938.016 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:58:58.016Z,1520549938.016 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:58:58.016Z,1520549938.016 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T22:58:58.017Z,1520549938.017 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T22:58:58.017Z,1520549938.017 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T22:58:58.387Z,1520549938.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:58.426Z,1520549938.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T22:58:58.427Z,1520549938.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:58.810Z,1520549938.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:58.824Z,1520549938.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T22:58:58.825Z,1520549938.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:59.207Z,1520549939.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:59.227Z,1520549939.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T22:58:59.228Z,1520549939.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:59.609Z,1520549939.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:58:59.629Z,1520549939.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T22:58:59.630Z,1520549939.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:58:59.991Z,1520549939.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:00.023Z,1520549940.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T22:59:00.024Z,1520549940.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:00.390Z,1520549940.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:00.422Z,1520549940.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T22:59:00.423Z,1520549940.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:00.789Z,1520549940.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:00.820Z,1520549940.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T22:59:00.825Z,1520549940.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:01.191Z,1520549941.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:01.222Z,1520549941.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T22:59:01.223Z,1520549941.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:01.616Z,1520549941.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:01.631Z,1520549941.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T22:59:01.632Z,1520549941.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:02.005Z,1520549942.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:02.038Z,1520549942.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T22:59:02.039Z,1520549942.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:02.398Z,1520549942.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:02.425Z,1520549942.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T22:59:02.426Z,1520549942.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:02.795Z,1520549942.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:02.834Z,1520549942.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T22:59:02.835Z,1520549942.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:03.195Z,1520549943.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:03.234Z,1520549943.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T22:59:03.235Z,1520549943.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:03.596Z,1520549943.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:03.612Z,1520549943.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T22:59:03.613Z,1520549943.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:03.999Z,1520549943.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:04.014Z,1520549944.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T22:59:04.015Z,1520549944.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:04.396Z,1520549944.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:04.411Z,1520549944.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T22:59:04.412Z,1520549944.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:04.797Z,1520549944.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:04.813Z,1520549944.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T22:59:04.814Z,1520549944.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:05.201Z,1520549945.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:05.217Z,1520549945.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T22:59:05.218Z,1520549945.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:05.609Z,1520549945.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:05.641Z,1520549945.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T22:59:05.642Z,1520549945.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:05.998Z,1520549945.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:06.014Z,1520549946.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T22:59:06.015Z,1520549946.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:06.401Z,1520549946.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:06.415Z,1520549946.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T22:59:06.416Z,1520549946.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:06.796Z,1520549946.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:06.820Z,1520549946.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T22:59:06.825Z,1520549946.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:07.202Z,1520549947.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:07.218Z,1520549947.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T22:59:07.219Z,1520549947.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:07.605Z,1520549947.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:07.621Z,1520549947.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T22:59:07.621Z,1520549947.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:08.005Z,1520549948.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:08.021Z,1520549948.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T22:59:08.022Z,1520549948.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:08.405Z,1520549948.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:08.420Z,1520549948.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T22:59:08.421Z,1520549948.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:08.796Z,1520549948.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:08.811Z,1520549948.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T22:59:08.812Z,1520549948.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:09.191Z,1520549949.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:09.214Z,1520549949.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T22:59:09.215Z,1520549949.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:09.595Z,1520549949.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:09.611Z,1520549949.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T22:59:09.612Z,1520549949.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:09.992Z,1520549949.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:10.030Z,1520549950.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T22:59:10.031Z,1520549950.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:10.399Z,1520549950.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:10.414Z,1520549950.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T22:59:10.415Z,1520549950.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:10.806Z,1520549950.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:10.821Z,1520549950.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T22:59:10.822Z,1520549950.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:11.208Z,1520549951.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:11.223Z,1520549951.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T22:59:11.225Z,1520549951.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:11.609Z,1520549951.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:11.624Z,1520549951.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T22:59:11.626Z,1520549951.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:11.993Z,1520549951.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:12.013Z,1520549952.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T22:59:12.014Z,1520549952.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:12.391Z,1520549952.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:12.412Z,1520549952.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T22:59:12.413Z,1520549952.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:12.797Z,1520549952.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:12.812Z,1520549952.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T22:59:12.813Z,1520549952.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:13.195Z,1520549953.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:13.214Z,1520549953.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T22:59:13.215Z,1520549953.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:13.606Z,1520549953.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:13.622Z,1520549953.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T22:59:13.623Z,1520549953.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:14.005Z,1520549954.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:14.031Z,1520549954.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T22:59:14.032Z,1520549954.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:14.401Z,1520549954.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:14.416Z,1520549954.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T22:59:14.417Z,1520549954.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:14.810Z,1520549954.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:14.838Z,1520549954.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T22:59:14.839Z,1520549954.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:15.195Z,1520549955.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:15.209Z,1520549955.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T22:59:15.210Z,1520549955.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:15.595Z,1520549955.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:15.611Z,1520549955.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T22:59:15.612Z,1520549955.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:15.990Z,1520549955.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:16.013Z,1520549956.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T22:59:16.014Z,1520549956.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:16.398Z,1520549956.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:16.413Z,1520549956.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T22:59:16.414Z,1520549956.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:16.817Z,1520549956.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:16.848Z,1520549956.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T22:59:16.849Z,1520549956.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:17.201Z,1520549957.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:17.216Z,1520549957.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T22:59:17.217Z,1520549957.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:17.601Z,1520549957.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:17.619Z,1520549957.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:17.998Z,1520549957.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:18.013Z,1520549958.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:18.399Z,1520549958.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:18.414Z,1520549958.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:18.800Z,1520549958.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:18.815Z,1520549958.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:19.198Z,1520549959.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:19.213Z,1520549959.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:19.600Z,1520549959.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:19.615Z,1520549959.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:20.001Z,1520549960.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:20.016Z,1520549960.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:20.402Z,1520549960.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:20.418Z,1520549960.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:20.798Z,1520549960.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:20.813Z,1520549960.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:21.196Z,1520549961.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:21.211Z,1520549961.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:21.599Z,1520549961.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:21.614Z,1520549961.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:21.995Z,1520549961.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:22.014Z,1520549962.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:22.398Z,1520549962.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:22.414Z,1520549962.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:22.800Z,1520549962.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:22.823Z,1520549962.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:23.205Z,1520549963.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:23.221Z,1520549963.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:23.601Z,1520549963.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:23.622Z,1520549963.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:23.996Z,1520549963.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:24.019Z,1520549964.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:24.398Z,1520549964.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:24.413Z,1520549964.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:24.800Z,1520549964.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:24.815Z,1520549964.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:25.199Z,1520549965.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:25.215Z,1520549965.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:25.601Z,1520549965.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:25.617Z,1520549965.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:26.005Z,1520549966.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:26.020Z,1520549966.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:26.401Z,1520549966.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:26.417Z,1520549966.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:26.795Z,1520549966.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:26.810Z,1520549966.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:27.198Z,1520549967.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:27.214Z,1520549967.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:27.598Z,1520549967.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:27.613Z,1520549967.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:27.000Z,1520549968.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:28.015Z,1520549968.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:28.397Z,1520549968.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:28.412Z,1520549968.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:28.801Z,1520549968.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:28.817Z,1520549968.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:29.205Z,1520549969.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:29.221Z,1520549969.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:29.601Z,1520549969.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:29.622Z,1520549969.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:29.999Z,1520549969.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:30.015Z,1520549970.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:30.399Z,1520549970.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:30.415Z,1520549970.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:30.797Z,1520549970.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:30.812Z,1520549970.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:31.198Z,1520549971.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:31.213Z,1520549971.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:31.600Z,1520549971.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:31.623Z,1520549971.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:32.006Z,1520549972.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:32.021Z,1520549972.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:32.401Z,1520549972.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:32.417Z,1520549972.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:32.799Z,1520549972.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:32.814Z,1520549972.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:33.198Z,1520549973.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:33.213Z,1520549973.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:33.598Z,1520549973.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:33.613Z,1520549973.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:33.996Z,1520549973.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:34.012Z,1520549974.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:34.398Z,1520549974.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:34.413Z,1520549974.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:34.801Z,1520549974.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:34.817Z,1520549974.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:35.205Z,1520549975.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:35.220Z,1520549975.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:35.601Z,1520549975.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:35.622Z,1520549975.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:35.996Z,1520549975.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:36.011Z,1520549976.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:36.395Z,1520549976.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:36.410Z,1520549976.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:36.802Z,1520549976.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:36.817Z,1520549976.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:37.198Z,1520549977.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:37.213Z,1520549977.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:37.601Z,1520549977.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:37.617Z,1520549977.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:38.005Z,1520549978.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:38.020Z,1520549978.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:38.401Z,1520549978.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:38.417Z,1520549978.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:38.795Z,1520549978.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:38.811Z,1520549978.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:39.195Z,1520549979.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:39.258Z,1520549979.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:39.603Z,1520549979.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:39.655Z,1520549979.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:39.990Z,1520549979.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:40.026Z,1520549980.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:40.389Z,1520549980.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:40.404Z,1520549980.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:40.811Z,1520549980.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:40.845Z,1520549980.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:41.215Z,1520549981.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:41.251Z,1520549981.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:41.602Z,1520549981.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:41.618Z,1520549981.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:41.994Z,1520549981.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:42.010Z,1520549982.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:42.413Z,1520549982.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:42.446Z,1520549982.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:46.533Z,1520549986.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:46.549Z,1520549986.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:46.646Z,1520549986.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:46.688Z,1520549986.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:47.017Z,1520549987.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:47.041Z,1520549987.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:47.417Z,1520549987.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:47.443Z,1520549987.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:47.813Z,1520549987.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:47.849Z,1520549987.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:48.205Z,1520549988.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:48.220Z,1520549988.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:48.604Z,1520549988.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:48.619Z,1520549988.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:49.004Z,1520549989.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:49.019Z,1520549989.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:49.417Z,1520549989.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:49.448Z,1520549989.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:49.813Z,1520549989.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:49.828Z,1520549989.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:50.204Z,1520549990.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:50.219Z,1520549990.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:50.605Z,1520549990.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:50.621Z,1520549990.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:51.003Z,1520549991.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:51.018Z,1520549991.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:51.404Z,1520549991.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:51.427Z,1520549991.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:51.850Z,1520549991.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:51.865Z,1520549991.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:52.209Z,1520549992.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:52.247Z,1520549992.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:52.605Z,1520549992.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:52.620Z,1520549992.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:53.010Z,1520549993.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:53.052Z,1520549993.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:53.417Z,1520549993.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:53.449Z,1520549993.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:53.809Z,1520549993.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:53.824Z,1520549993.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:54.217Z,1520549994.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:54.248Z,1520549994.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:54.677Z,1520549994.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:54.702Z,1520549994.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:55.001Z,1520549995.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:55.022Z,1520549995.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:55.417Z,1520549995.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:55.448Z,1520549995.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:55.809Z,1520549995.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:55.838Z,1520549995.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:56.201Z,1520549996.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:56.226Z,1520549996.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:56.596Z,1520549996.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:56.638Z,1520549996.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:57.002Z,1520549997.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:57.017Z,1520549997.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:57.405Z,1520549997.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:57.437Z,1520549997.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:57.813Z,1520549997.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:57.844Z,1520549997.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:58.212Z,1520549998.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:58.246Z,1520549998.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:58.603Z,1520549998.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:58.618Z,1520549998.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:59.003Z,1520549999.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:59.045Z,1520549999.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:59.421Z,1520549999.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:59.448Z,1520549999.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T22:59:59.817Z,1520549999.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T22:59:59.840Z,1520549999.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:00.217Z,1520550000.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:00.243Z,1520550000.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:00.602Z,1520550000.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:00.617Z,1520550000.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:00.999Z,1520550000.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:01.014Z,1520550001.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:01.413Z,1520550001.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:01.447Z,1520550001.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:01.821Z,1520550001.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:01.847Z,1520550001.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:02.202Z,1520550002.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:02.217Z,1520550002.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:02.605Z,1520550002.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:02.620Z,1520550002.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:03.004Z,1520550003.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:03.021Z,1520550003.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:03.406Z,1520550003.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:03.422Z,1520550003.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:03.818Z,1520550003.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:03.847Z,1520550003.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:04.213Z,1520550004.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:04.241Z,1520550004.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:04.602Z,1520550004.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:04.629Z,1520550004.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:05.006Z,1520550005.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:05.027Z,1520550005.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:05.408Z,1520550005.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:05.424Z,1520550005.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:05.809Z,1520550005.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:05.826Z,1520550005.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:06.213Z,1520550006.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:06.229Z,1520550006.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:06.608Z,1520550006.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:06.623Z,1520550006.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:07.006Z,1520550007.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:07.021Z,1520550007.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:07.408Z,1520550007.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:07.423Z,1520550007.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:07.810Z,1520550007.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:07.825Z,1520550007.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:08.208Z,1520550008.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:08.231Z,1520550008.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:08.608Z,1520550008.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:08.624Z,1520550008.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:09.006Z,1520550009.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:09.021Z,1520550009.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:09.408Z,1520550009.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:09.431Z,1520550009.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:09.813Z,1520550009.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:09.829Z,1520550009.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:10.213Z,1520550010.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:10.230Z,1520550010.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:10.606Z,1520550010.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:10.621Z,1520550010.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:11.003Z,1520550011.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:11.018Z,1520550011.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:11.409Z,1520550011.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:11.424Z,1520550011.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:11.813Z,1520550011.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:11.829Z,1520550011.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:12.213Z,1520550012.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:12.229Z,1520550012.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:12.606Z,1520550012.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:12.621Z,1520550012.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:12.999Z,1520550012.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:13.014Z,1520550013.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:13.408Z,1520550013.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:13.423Z,1520550013.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:13.809Z,1520550013.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:13.824Z,1520550013.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:14.208Z,1520550014.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:14.223Z,1520550014.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:14.608Z,1520550014.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:14.624Z,1520550014.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:14.999Z,1520550014.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:15.022Z,1520550015.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:15.409Z,1520550015.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:15.425Z,1520550015.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:15.809Z,1520550015.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:15.824Z,1520550015.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:16.213Z,1520550016.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:16.230Z,1520550016.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:16.606Z,1520550016.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:16.627Z,1520550016.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:17.006Z,1520550017.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:17.027Z,1520550017.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:17.410Z,1520550017.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:17.425Z,1520550017.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:17.813Z,1520550017.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:17.829Z,1520550017.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:18.209Z,1520550018.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:18.225Z,1520550018.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:18.608Z,1520550018.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:18.623Z,1520550018.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:19.006Z,1520550019.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:19.021Z,1520550019.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:19.410Z,1520550019.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:19.426Z,1520550019.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:19.813Z,1520550019.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:19.828Z,1520550019.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:20.209Z,1520550020.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:20.224Z,1520550020.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:20.603Z,1520550020.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:20.622Z,1520550020.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:21.005Z,1520550021.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:21.020Z,1520550021.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:21.408Z,1520550021.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:21.431Z,1520550021.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:21.813Z,1520550021.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:21.828Z,1520550021.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:22.213Z,1520550022.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:22.230Z,1520550022.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:22.608Z,1520550022.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:22.623Z,1520550022.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:23.007Z,1520550023.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:23.022Z,1520550023.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:23.413Z,1520550023.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:23.428Z,1520550023.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:23.808Z,1520550023.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:23.823Z,1520550023.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:24.214Z,1520550024.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:24.229Z,1520550024.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:24.604Z,1520550024.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:24.619Z,1520550024.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:25.003Z,1520550025.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:25.018Z,1520550025.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:25.412Z,1520550025.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:25.428Z,1520550025.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:25.813Z,1520550025.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:25.829Z,1520550025.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:26.212Z,1520550026.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:26.229Z,1520550026.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:26.608Z,1520550026.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:26.623Z,1520550026.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:27.009Z,1520550027.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:27.025Z,1520550027.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:27.413Z,1520550027.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:27.428Z,1520550027.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:27.812Z,1520550027.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:27.831Z,1520550027.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:28.213Z,1520550028.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:28.229Z,1520550028.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:28.608Z,1520550028.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:28.623Z,1520550028.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:29.007Z,1520550029.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:29.023Z,1520550029.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:29.413Z,1520550029.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:29.431Z,1520550029.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:29.812Z,1520550029.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:29.828Z,1520550029.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:30.213Z,1520550030.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:30.228Z,1520550030.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:30.603Z,1520550030.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:30.623Z,1520550030.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:30.998Z,1520550030.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:31.025Z,1520550031.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:31.409Z,1520550031.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:31.425Z,1520550031.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:31.813Z,1520550031.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:31.829Z,1520550031.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:32.208Z,1520550032.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:32.223Z,1520550032.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:32.603Z,1520550032.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:32.622Z,1520550032.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:33.001Z,1520550033.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:33.023Z,1520550033.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:33.408Z,1520550033.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:33.424Z,1520550033.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:33.814Z,1520550033.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:33.829Z,1520550033.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:34.213Z,1520550034.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:34.229Z,1520550034.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:34.608Z,1520550034.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:34.623Z,1520550034.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:35.003Z,1520550035.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:35.018Z,1520550035.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:35.409Z,1520550035.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:35.425Z,1520550035.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:35.809Z,1520550035.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:35.825Z,1520550035.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:36.210Z,1520550036.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:36.225Z,1520550036.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:36.608Z,1520550036.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:36.624Z,1520550036.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:37.000Z,1520550037.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:37.015Z,1520550037.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:37.409Z,1520550037.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:37.425Z,1520550037.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:37.809Z,1520550037.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:37.825Z,1520550037.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:38.209Z,1520550038.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:38.225Z,1520550038.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:38.610Z,1520550038.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:38.631Z,1520550038.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:39.008Z,1520550039.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:39.023Z,1520550039.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:39.410Z,1520550039.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:39.426Z,1520550039.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:39.810Z,1520550039.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:39.825Z,1520550039.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:40.210Z,1520550040.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:40.226Z,1520550040.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:40.608Z,1520550040.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:40.625Z,1520550040.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:41.007Z,1520550041.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:41.023Z,1520550041.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:41.410Z,1520550041.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:41.427Z,1520550041.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:41.814Z,1520550041.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:41.830Z,1520550041.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:42.210Z,1520550042.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:42.226Z,1520550042.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:42.604Z,1520550042.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:42.627Z,1520550042.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:45.700Z,1520550045.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:45.716Z,1520550045.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:45.821Z,1520550045.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:45.863Z,1520550045.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:46.185Z,1520550046.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:46.210Z,1520550046.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:46.585Z,1520550046.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:46.618Z,1520550046.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:46.967Z,1520550046.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:46.983Z,1520550046.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:47.370Z,1520550047.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:47.391Z,1520550047.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:47.769Z,1520550047.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:47.790Z,1520550047.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:48.161Z,1520550048.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:48.189Z,1520550048.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:48.577Z,1520550048.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:48.593Z,1520550048.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:48.985Z,1520550048.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:49.017Z,1520550049.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:49.372Z,1520550049.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:49.387Z,1520550049.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:49.772Z,1520550049.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:49.787Z,1520550049.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:50.172Z,1520550050.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:50.187Z,1520550050.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:50.568Z,1520550050.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:50.584Z,1520550050.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:50.973Z,1520550050.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:50.989Z,1520550050.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:51.372Z,1520550051.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:51.387Z,1520550051.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:51.785Z,1520550051.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:51.816Z,1520550051.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:52.185Z,1520550052.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:52.215Z,1520550052.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:52.585Z,1520550052.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:52.616Z,1520550052.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:52.972Z,1520550052.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:52.988Z,1520550052.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:53.372Z,1520550053.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:53.387Z,1520550053.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:53.773Z,1520550053.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:53.788Z,1520550053.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:54.166Z,1520550054.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:54.181Z,1520550054.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:54.585Z,1520550054.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:54.616Z,1520550054.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:54.977Z,1520550054.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:54.992Z,1520550054.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:55.374Z,1520550055.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:55.389Z,1520550055.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:55.773Z,1520550055.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:55.788Z,1520550055.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:56.172Z,1520550056.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:56.187Z,1520550056.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:56.568Z,1520550056.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:56.592Z,1520550056.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:56.973Z,1520550056.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:56.988Z,1520550056.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:57.375Z,1520550057.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:57.390Z,1520550057.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:57.778Z,1520550057.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:57.794Z,1520550057.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:58.181Z,1520550058.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:58.196Z,1520550058.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:58.578Z,1520550058.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:58.598Z,1520550058.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:58.969Z,1520550058.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:58.984Z,1520550058.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:59.376Z,1520550059.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:59.391Z,1520550059.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:00:59.776Z,1520550059.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:00:59.792Z,1520550059.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:00.164Z,1520550060.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:00.184Z,1520550060.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:00.589Z,1520550060.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:00.604Z,1520550060.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:00.981Z,1520550060.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:00.996Z,1520550060.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:01.376Z,1520550061.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:01.400Z,1520550061.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:01.773Z,1520550061.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:01.788Z,1520550061.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:02.181Z,1520550062.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:02.196Z,1520550062.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:02.569Z,1520550062.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:02.589Z,1520550062.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:02.976Z,1520550062.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:02.998Z,1520550062.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:03.374Z,1520550063.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:03.394Z,1520550063.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:03.785Z,1520550063.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:03.806Z,1520550063.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:04.184Z,1520550064.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:04.199Z,1520550064.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:04.585Z,1520550064.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:04.601Z,1520550064.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:04.975Z,1520550064.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:04.994Z,1520550064.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:05.376Z,1520550065.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:05.391Z,1520550065.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:05.777Z,1520550065.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:05.793Z,1520550065.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:06.165Z,1520550066.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:06.193Z,1520550066.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:06.585Z,1520550066.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:06.606Z,1520550066.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:06.985Z,1520550066.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:07.001Z,1520550067.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:07.385Z,1520550067.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:07.401Z,1520550067.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:07.772Z,1520550067.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:07.787Z,1520550067.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:08.177Z,1520550068.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:08.192Z,1520550068.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:08.569Z,1520550068.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:08.593Z,1520550068.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:08.976Z,1520550068.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:08.991Z,1520550068.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:09.380Z,1520550069.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:09.395Z,1520550069.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:09.785Z,1520550069.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:09.801Z,1520550069.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:10.189Z,1520550070.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:10.210Z,1520550070.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:10.587Z,1520550070.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:10.602Z,1520550070.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:10.963Z,1520550070.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:10.995Z,1520550070.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:11.366Z,1520550071.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:11.393Z,1520550071.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:11.768Z,1520550071.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:11.795Z,1520550071.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:12.163Z,1520550072.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:12.191Z,1520550072.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:12.589Z,1520550072.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:12.605Z,1520550072.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:12.994Z,1520550072.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:13.014Z,1520550073.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:13.386Z,1520550073.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:13.406Z,1520550073.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:13.763Z,1520550073.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:13.791Z,1520550073.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:14.167Z,1520550074.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:14.197Z,1520550074.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:14.564Z,1520550074.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:14.591Z,1520550074.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:14.977Z,1520550074.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:14.999Z,1520550074.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:15.367Z,1520550075.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:15.397Z,1520550075.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:15.787Z,1520550075.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:15.803Z,1520550075.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:16.192Z,1520550076.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:16.207Z,1520550076.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:16.588Z,1520550076.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:16.604Z,1520550076.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:16.967Z,1520550076.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:17.002Z,1520550077.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:17.364Z,1520550077.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:17.395Z,1520550077.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:17.767Z,1520550077.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:17.798Z,1520550077.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:18.167Z,1520550078.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:18.210Z,1520550078.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:18.587Z,1520550078.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:18.602Z,1520550078.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:18.991Z,1520550078.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:19.007Z,1520550079.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:19.386Z,1520550079.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:19.401Z,1520550079.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:19.767Z,1520550079.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:19.794Z,1520550079.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:20.163Z,1520550080.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:20.200Z,1520550080.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:20.567Z,1520550080.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:20.593Z,1520550080.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:20.968Z,1520550080.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:20.995Z,1520550080.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:21.363Z,1520550081.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:21.396Z,1520550081.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:21.787Z,1520550081.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:21.802Z,1520550081.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:22.189Z,1520550082.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:22.204Z,1520550082.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:22.586Z,1520550082.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:22.601Z,1520550082.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:22.963Z,1520550082.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:22.995Z,1520550082.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:23.366Z,1520550083.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:23.393Z,1520550083.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:23.764Z,1520550083.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:23.792Z,1520550083.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:24.162Z,1520550084.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:24.200Z,1520550084.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:24.586Z,1520550084.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:24.606Z,1520550084.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:24.990Z,1520550084.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:25.005Z,1520550085.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:25.386Z,1520550085.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:25.401Z,1520550085.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:25.766Z,1520550085.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:25.793Z,1520550085.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:26.163Z,1520550086.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:26.202Z,1520550086.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:26.567Z,1520550086.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:26.594Z,1520550086.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:26.966Z,1520550086.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:26.993Z,1520550086.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:27.364Z,1520550087.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:27.400Z,1520550087.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:27.786Z,1520550087.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:27.801Z,1520550087.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:28.189Z,1520550088.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:28.210Z,1520550088.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:28.586Z,1520550088.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:28.601Z,1520550088.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:28.967Z,1520550088.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:28.993Z,1520550088.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:29.367Z,1520550089.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:29.402Z,1520550089.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:29.767Z,1520550089.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:29.795Z,1520550089.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:30.166Z,1520550090.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:30.212Z,1520550090.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:30.586Z,1520550090.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:30.601Z,1520550090.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:30.990Z,1520550090.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:31.005Z,1520550091.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:31.387Z,1520550091.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:31.402Z,1520550091.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:31.766Z,1520550091.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:31.793Z,1520550091.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:32.164Z,1520550092.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:32.200Z,1520550092.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:32.567Z,1520550092.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:32.594Z,1520550092.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:32.966Z,1520550092.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:32.993Z,1520550092.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:33.386Z,1520550093.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:33.401Z,1520550093.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:33.789Z,1520550093.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:33.804Z,1520550093.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:34.187Z,1520550094.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:34.206Z,1520550094.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:34.567Z,1520550094.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:34.595Z,1520550094.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:34.967Z,1520550094.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:34.994Z,1520550094.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:35.366Z,1520550095.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:35.393Z,1520550095.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:35.786Z,1520550095.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:35.801Z,1520550095.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:36.192Z,1520550096.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:36.210Z,1520550096.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:36.586Z,1520550096.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:36.601Z,1520550096.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:36.966Z,1520550096.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:36.995Z,1520550096.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:37.364Z,1520550097.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:37.398Z,1520550097.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:37.766Z,1520550097.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:37.798Z,1520550097.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:38.163Z,1520550098.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:38.200Z,1520550098.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:38.586Z,1520550098.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:38.601Z,1520550098.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:38.990Z,1520550098.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:39.005Z,1520550099.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:39.386Z,1520550099.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:39.401Z,1520550099.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:39.766Z,1520550099.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:39.793Z,1520550099.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:40.166Z,1520550100.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:40.193Z,1520550100.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:40.586Z,1520550100.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:40.601Z,1520550100.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:40.990Z,1520550100.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:41.005Z,1520550101.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:41.386Z,1520550101.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:41.401Z,1520550101.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:41.765Z,1520550101.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:41.794Z,1520550101.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:42.167Z,1520550102.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:42.194Z,1520550102.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:42.567Z,1520550102.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:42.598Z,1520550102.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:42.964Z,1520550102.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:43.028Z,1520550103.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:47.284Z,1520550107.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:47.308Z,1520550107.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:47.428Z,1520550107.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:47.459Z,1520550107.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:47.844Z,1520550107.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:47.872Z,1520550107.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:48.231Z,1520550108.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:48.263Z,1520550108.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:48.613Z,1520550108.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:48.628Z,1520550108.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:49.011Z,1520550109.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:49.026Z,1520550109.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:49.412Z,1520550109.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:49.427Z,1520550109.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:49.811Z,1520550109.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:49.826Z,1520550109.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:50.211Z,1520550110.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:50.226Z,1520550110.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:50.625Z,1520550110.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:50.657Z,1520550110.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:51.021Z,1520550111.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:51.036Z,1520550111.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:51.421Z,1520550111.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:51.442Z,1520550111.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:51.813Z,1520550111.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:51.828Z,1520550111.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:52.214Z,1520550112.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:52.229Z,1520550112.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:52.617Z,1520550112.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:52.632Z,1520550112.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:53.013Z,1520550113.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:53.028Z,1520550113.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:53.421Z,1520550113.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:53.437Z,1520550113.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:53.826Z,1520550113.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:53.840Z,1520550113.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:54.228Z,1520550114.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:54.243Z,1520550114.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:54.616Z,1520550114.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:54.635Z,1520550114.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:54.999Z,1520550114.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:55.032Z,1520550115.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:55.429Z,1520550115.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:55.451Z,1520550115.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:55.829Z,1520550115.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:55.844Z,1520550115.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:56.230Z,1520550116.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:56.245Z,1520550116.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:56.617Z,1520550116.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:56.633Z,1520550116.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:57.020Z,1520550117.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:57.035Z,1520550117.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:57.429Z,1520550117.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:57.444Z,1520550117.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:57.822Z,1520550117.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:57.838Z,1520550117.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:58.226Z,1520550118.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:58.241Z,1520550118.241 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:58.241Z,1520550118.241 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 305
2018-03-08T23:01:58.241Z,1520550118.241 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T23:01:58.243Z,1520550118.243 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:58.243Z,1520550118.243 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 305
2018-03-08T23:01:58.243Z,1520550118.243 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T23:01:58.245Z,1520550118.245 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:58.245Z,1520550118.245 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 305
2018-03-08T23:01:58.245Z,1520550118.245 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T23:01:58.273Z,1520550118.273 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T23:01:58.273Z,1520550118.273 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T23:01:58.273Z,1520550118.273 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T23:01:58.604Z,1520550118.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:58.651Z,1520550118.651 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T23:01:58.651Z,1520550118.651 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 305
2018-03-08T23:01:58.651Z,1520550118.651 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T23:01:58.651Z,1520550118.651 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 305
2018-03-08T23:01:58.652Z,1520550118.652 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T23:01:58.652Z,1520550118.652 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 305
2018-03-08T23:01:59.001Z,1520550119.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:59.034Z,1520550119.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T23:01:59.034Z,1520550119.034 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T23:01:59.034Z,1520550119.034 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T23:01:59.035Z,1520550119.035 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T23:01:59.035Z,1520550119.035 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T23:01:59.035Z,1520550119.035 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T23:01:59.036Z,1520550119.036 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T23:01:59.036Z,1520550119.036 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T23:01:59.041Z,1520550119.041 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T23:01:59.413Z,1520550119.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:59.451Z,1520550119.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T23:01:59.452Z,1520550119.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:01:59.832Z,1520550119.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:01:59.847Z,1520550119.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T23:01:59.848Z,1520550119.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:00.214Z,1520550120.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:00.241Z,1520550120.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-08T23:02:00.242Z,1520550120.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:00.604Z,1520550120.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:00.620Z,1520550120.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-08T23:02:00.633Z,1520550120.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:01.003Z,1520550121.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:01.018Z,1520550121.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-08T23:02:01.019Z,1520550121.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:01.413Z,1520550121.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:01.449Z,1520550121.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-08T23:02:01.450Z,1520550121.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:01.822Z,1520550121.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:01.844Z,1520550121.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-08T23:02:01.845Z,1520550121.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:02.226Z,1520550122.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:02.258Z,1520550122.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-08T23:02:02.259Z,1520550122.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:02.608Z,1520550122.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:02.623Z,1520550122.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T23:02:02.624Z,1520550122.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:03.008Z,1520550123.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:03.023Z,1520550123.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T23:02:03.024Z,1520550123.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:03.425Z,1520550123.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:03.458Z,1520550123.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T23:02:03.459Z,1520550123.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:03.813Z,1520550123.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:03.828Z,1520550123.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T23:02:03.829Z,1520550123.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:04.222Z,1520550124.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:04.257Z,1520550124.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T23:02:04.258Z,1520550124.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:04.284Z,1520550124.284 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T23:02:04.612Z,1520550124.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:04.627Z,1520550124.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T23:02:04.628Z,1520550124.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:05.012Z,1520550125.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:05.027Z,1520550125.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T23:02:05.028Z,1520550125.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:05.429Z,1520550125.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:05.444Z,1520550125.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T23:02:05.461Z,1520550125.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:05.820Z,1520550125.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:05.834Z,1520550125.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T23:02:05.835Z,1520550125.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:06.221Z,1520550126.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:06.235Z,1520550126.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T23:02:06.237Z,1520550126.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:06.611Z,1520550126.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:06.626Z,1520550126.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T23:02:06.627Z,1520550126.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:07.005Z,1520550127.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:07.033Z,1520550127.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T23:02:07.034Z,1520550127.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:07.421Z,1520550127.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:07.436Z,1520550127.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T23:02:07.437Z,1520550127.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:07.820Z,1520550127.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:07.842Z,1520550127.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T23:02:07.843Z,1520550127.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:08.225Z,1520550128.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:08.240Z,1520550128.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T23:02:08.240Z,1520550128.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:08.616Z,1520550128.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:08.631Z,1520550128.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T23:02:08.632Z,1520550128.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:09.011Z,1520550129.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:09.027Z,1520550129.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T23:02:09.028Z,1520550129.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:09.421Z,1520550129.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:09.436Z,1520550129.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T23:02:09.437Z,1520550129.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:09.824Z,1520550129.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:09.839Z,1520550129.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T23:02:09.840Z,1520550129.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:10.225Z,1520550130.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:10.246Z,1520550130.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T23:02:10.247Z,1520550130.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:10.616Z,1520550130.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:10.631Z,1520550130.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T23:02:10.632Z,1520550130.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:11.015Z,1520550131.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:11.030Z,1520550131.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T23:02:11.031Z,1520550131.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:11.421Z,1520550131.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:11.436Z,1520550131.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T23:02:11.437Z,1520550131.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:11.825Z,1520550131.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:11.840Z,1520550131.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T23:02:11.841Z,1520550131.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:12.217Z,1520550132.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:12.232Z,1520550132.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T23:02:12.233Z,1520550132.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:12.607Z,1520550132.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:12.630Z,1520550132.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T23:02:12.631Z,1520550132.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:13.012Z,1520550133.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:13.027Z,1520550133.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T23:02:13.028Z,1520550133.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:13.420Z,1520550133.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:13.435Z,1520550133.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T23:02:13.437Z,1520550133.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:13.824Z,1520550133.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:13.839Z,1520550133.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T23:02:13.840Z,1520550133.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:14.225Z,1520550134.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:14.240Z,1520550134.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T23:02:14.241Z,1520550134.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:14.609Z,1520550134.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:14.629Z,1520550134.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T23:02:14.630Z,1520550134.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:15.007Z,1520550135.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:15.028Z,1520550135.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T23:02:15.029Z,1520550135.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:15.421Z,1520550135.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:15.436Z,1520550135.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T23:02:15.437Z,1520550135.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:15.824Z,1520550135.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:15.847Z,1520550135.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T23:02:15.848Z,1520550135.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:16.224Z,1520550136.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:16.238Z,1520550136.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T23:02:16.239Z,1520550136.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:16.613Z,1520550136.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:16.628Z,1520550136.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T23:02:16.629Z,1520550136.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:16.999Z,1520550136.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:17.030Z,1520550137.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T23:02:17.031Z,1520550137.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:17.420Z,1520550137.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:17.436Z,1520550137.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T23:02:17.437Z,1520550137.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:17.824Z,1520550137.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:17.839Z,1520550137.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T23:02:17.840Z,1520550137.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:18.213Z,1520550138.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:18.232Z,1520550138.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T23:02:18.237Z,1520550138.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:18.616Z,1520550138.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:18.632Z,1520550138.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:18.999Z,1520550138.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:19.026Z,1520550139.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:19.422Z,1520550139.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:19.438Z,1520550139.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:19.828Z,1520550139.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:19.843Z,1520550139.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:20.224Z,1520550140.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:20.239Z,1520550140.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:20.616Z,1520550140.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:20.631Z,1520550140.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:21.023Z,1520550141.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:21.050Z,1520550141.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:21.426Z,1520550141.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:21.441Z,1520550141.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:21.828Z,1520550141.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:21.843Z,1520550141.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:22.213Z,1520550142.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:22.228Z,1520550142.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:22.612Z,1520550142.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:22.627Z,1520550142.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:23.007Z,1520550143.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:23.034Z,1520550143.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:23.426Z,1520550143.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:23.442Z,1520550143.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:23.821Z,1520550143.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:23.836Z,1520550143.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:24.221Z,1520550144.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:24.236Z,1520550144.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:24.612Z,1520550144.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:24.634Z,1520550144.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:25.011Z,1520550145.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:25.030Z,1520550145.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:25.414Z,1520550145.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:25.438Z,1520550145.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:25.828Z,1520550145.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:25.850Z,1520550145.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:26.226Z,1520550146.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:26.241Z,1520550146.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:26.615Z,1520550146.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:26.631Z,1520550146.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:27.003Z,1520550147.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:27.035Z,1520550147.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:27.426Z,1520550147.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:27.441Z,1520550147.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:27.821Z,1520550147.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:27.837Z,1520550147.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:28.222Z,1520550148.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:28.238Z,1520550148.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:28.603Z,1520550148.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:28.639Z,1520550148.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:29.015Z,1520550149.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:29.034Z,1520550149.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:29.421Z,1520550149.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:29.437Z,1520550149.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:29.825Z,1520550149.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:29.846Z,1520550149.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:30.217Z,1520550150.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:30.238Z,1520550150.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:30.603Z,1520550150.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:30.634Z,1520550150.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:31.003Z,1520550151.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:31.031Z,1520550151.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:31.418Z,1520550151.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:31.440Z,1520550151.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:31.828Z,1520550151.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:31.843Z,1520550151.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:32.225Z,1520550152.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:32.240Z,1520550152.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:32.616Z,1520550152.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:32.631Z,1520550152.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:33.003Z,1520550153.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:33.043Z,1520550153.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:33.426Z,1520550153.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:33.441Z,1520550153.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:33.829Z,1520550153.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:33.844Z,1520550153.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:34.229Z,1520550154.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:34.250Z,1520550154.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:34.608Z,1520550154.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:34.635Z,1520550154.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:35.007Z,1520550155.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:35.035Z,1520550155.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:35.423Z,1520550155.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:35.438Z,1520550155.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:35.831Z,1520550155.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:35.846Z,1520550155.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:36.213Z,1520550156.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:36.247Z,1520550156.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:36.607Z,1520550156.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:36.635Z,1520550156.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:37.007Z,1520550157.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:37.035Z,1520550157.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:37.409Z,1520550157.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:37.447Z,1520550157.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:37.826Z,1520550157.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:37.846Z,1520550157.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:38.227Z,1520550158.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:38.246Z,1520550158.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:38.609Z,1520550158.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:38.638Z,1520550158.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:39.004Z,1520550159.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:39.035Z,1520550159.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:39.417Z,1520550159.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:39.446Z,1520550159.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:39.833Z,1520550159.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:39.848Z,1520550159.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:40.214Z,1520550160.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:40.240Z,1520550160.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:40.603Z,1520550160.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:40.644Z,1520550160.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:41.000Z,1520550161.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:41.015Z,1520550161.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:41.422Z,1520550161.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:41.449Z,1520550161.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:41.817Z,1520550161.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:41.848Z,1520550161.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:42.213Z,1520550162.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:42.249Z,1520550162.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:42.613Z,1520550162.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:42.628Z,1520550162.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:43.011Z,1520550163.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:43.025Z,1520550163.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:46.117Z,1520550166.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:46.152Z,1520550166.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:46.265Z,1520550166.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:46.310Z,1520550166.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:46.626Z,1520550166.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:46.651Z,1520550166.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:47.003Z,1520550167.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:47.019Z,1520550167.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:47.412Z,1520550167.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:47.428Z,1520550167.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:47.809Z,1520550167.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:47.824Z,1520550167.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:48.195Z,1520550168.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:48.231Z,1520550168.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:48.616Z,1520550168.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:48.631Z,1520550168.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:49.017Z,1520550169.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:49.032Z,1520550169.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:49.418Z,1520550169.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:49.433Z,1520550169.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:49.811Z,1520550169.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:49.826Z,1520550169.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:50.212Z,1520550170.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:50.227Z,1520550170.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:50.612Z,1520550170.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:50.634Z,1520550170.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:51.011Z,1520550171.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:51.030Z,1520550171.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:51.417Z,1520550171.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:51.433Z,1520550171.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:51.817Z,1520550171.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:51.832Z,1520550171.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:52.217Z,1520550172.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:52.232Z,1520550172.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:52.613Z,1520550172.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:52.628Z,1520550172.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:53.003Z,1520550173.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:53.022Z,1520550173.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:53.416Z,1520550173.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:53.431Z,1520550173.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:53.817Z,1520550173.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:53.832Z,1520550173.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:54.218Z,1520550174.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:54.233Z,1520550174.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:54.603Z,1520550174.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:54.635Z,1520550174.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:55.012Z,1520550175.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:55.027Z,1520550175.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:55.415Z,1520550175.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:55.430Z,1520550175.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:55.817Z,1520550175.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:55.832Z,1520550175.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:56.217Z,1520550176.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:56.232Z,1520550176.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:56.613Z,1520550176.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:56.628Z,1520550176.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:57.011Z,1520550177.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:57.026Z,1520550177.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:57.417Z,1520550177.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:57.438Z,1520550177.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:57.813Z,1520550177.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:57.829Z,1520550177.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:58.216Z,1520550178.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:58.232Z,1520550178.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:58.613Z,1520550178.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:58.628Z,1520550178.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:59.004Z,1520550179.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:59.032Z,1520550179.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:59.420Z,1520550179.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:59.436Z,1520550179.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:02:59.820Z,1520550179.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:02:59.842Z,1520550179.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:00.214Z,1520550180.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:00.229Z,1520550180.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:00.607Z,1520550180.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:00.627Z,1520550180.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:01.004Z,1520550181.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:01.033Z,1520550181.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:01.410Z,1520550181.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:01.433Z,1520550181.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:01.821Z,1520550181.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:01.837Z,1520550181.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:02.225Z,1520550182.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:02.246Z,1520550182.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:02.613Z,1520550182.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:02.628Z,1520550182.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:02.998Z,1520550182.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:03.036Z,1520550183.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:03.425Z,1520550183.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:03.447Z,1520550183.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:03.818Z,1520550183.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:03.833Z,1520550183.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:04.217Z,1520550184.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:04.233Z,1520550184.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:04.600Z,1520550184.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:04.637Z,1520550184.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:04.996Z,1520550184.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:05.030Z,1520550185.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:05.421Z,1520550185.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:05.436Z,1520550185.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:05.826Z,1520550185.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:05.846Z,1520550185.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:06.214Z,1520550186.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:06.229Z,1520550186.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:06.600Z,1520550186.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:06.639Z,1520550186.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:06.999Z,1520550186.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:07.031Z,1520550187.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:07.409Z,1520550187.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:07.443Z,1520550187.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:07.823Z,1520550187.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:07.838Z,1520550187.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:08.217Z,1520550188.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:08.249Z,1520550188.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:08.604Z,1520550188.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:08.628Z,1520550188.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:09.002Z,1520550189.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:09.039Z,1520550189.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:09.417Z,1520550189.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:09.443Z,1520550189.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:09.821Z,1520550189.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:09.847Z,1520550189.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:10.217Z,1520550190.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:10.241Z,1520550190.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:10.606Z,1520550190.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:10.643Z,1520550190.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:11.008Z,1520550191.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:11.023Z,1520550191.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:11.408Z,1520550191.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:11.423Z,1520550191.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:11.817Z,1520550191.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:11.850Z,1520550191.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:12.221Z,1520550192.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:12.252Z,1520550192.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:12.618Z,1520550192.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:12.649Z,1520550192.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:13.009Z,1520550193.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:13.029Z,1520550193.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:13.411Z,1520550193.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:13.426Z,1520550193.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:13.812Z,1520550193.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:13.827Z,1520550193.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:14.209Z,1520550194.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:14.225Z,1520550194.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:14.614Z,1520550194.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:14.630Z,1520550194.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:15.018Z,1520550195.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:15.033Z,1520550195.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:15.417Z,1520550195.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:15.433Z,1520550195.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:15.803Z,1520550195.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:15.823Z,1520550195.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:16.211Z,1520550196.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:16.227Z,1520550196.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:16.614Z,1520550196.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:16.629Z,1520550196.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:17.017Z,1520550197.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:17.033Z,1520550197.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:17.414Z,1520550197.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:17.431Z,1520550197.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:17.811Z,1520550197.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:17.827Z,1520550197.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:18.209Z,1520550198.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:18.228Z,1520550198.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:18.612Z,1520550198.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:18.634Z,1520550198.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:19.014Z,1520550199.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:19.029Z,1520550199.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:19.411Z,1520550199.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:19.431Z,1520550199.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:19.816Z,1520550199.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:19.833Z,1520550199.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:20.217Z,1520550200.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:20.233Z,1520550200.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:20.616Z,1520550200.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:20.632Z,1520550200.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:21.011Z,1520550201.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:21.026Z,1520550201.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:21.407Z,1520550201.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:21.422Z,1520550201.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:21.813Z,1520550201.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:21.828Z,1520550201.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:22.211Z,1520550202.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:22.230Z,1520550202.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:22.617Z,1520550202.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:22.632Z,1520550202.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:23.017Z,1520550203.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:23.033Z,1520550203.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:23.416Z,1520550203.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:23.431Z,1520550203.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:23.803Z,1520550203.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:23.819Z,1520550203.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:24.216Z,1520550204.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:24.232Z,1520550204.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:24.607Z,1520550204.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:24.622Z,1520550204.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:25.013Z,1520550205.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:25.028Z,1520550205.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:25.411Z,1520550205.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:25.430Z,1520550205.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:25.817Z,1520550205.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:25.832Z,1520550205.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:26.217Z,1520550206.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:26.232Z,1520550206.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:26.616Z,1520550206.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:26.631Z,1520550206.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:27.006Z,1520550207.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:27.033Z,1520550207.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:27.412Z,1520550207.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:27.427Z,1520550207.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:27.813Z,1520550207.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:27.828Z,1520550207.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:28.198Z,1520550208.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:28.231Z,1520550208.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:28.622Z,1520550208.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:28.637Z,1520550208.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:29.022Z,1520550209.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:29.042Z,1520550209.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:29.421Z,1520550209.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:29.436Z,1520550209.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:29.812Z,1520550209.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:29.827Z,1520550209.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:30.195Z,1520550210.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:30.227Z,1520550210.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:30.599Z,1520550210.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:30.631Z,1520550210.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:30.996Z,1520550210.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:31.032Z,1520550211.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:31.411Z,1520550211.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:31.430Z,1520550211.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:31.818Z,1520550211.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:31.839Z,1520550211.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:32.224Z,1520550212.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:32.239Z,1520550212.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:32.621Z,1520550212.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:32.636Z,1520550212.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:32.999Z,1520550212.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:33.030Z,1520550213.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:33.399Z,1520550213.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:33.432Z,1520550213.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:33.800Z,1520550213.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:33.831Z,1520550213.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:34.199Z,1520550214.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:34.231Z,1520550214.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:34.623Z,1520550214.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:34.638Z,1520550214.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:35.024Z,1520550215.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:35.039Z,1520550215.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:35.421Z,1520550215.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:35.442Z,1520550215.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:35.811Z,1520550215.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:35.826Z,1520550215.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:36.218Z,1520550216.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:36.234Z,1520550216.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:36.599Z,1520550216.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:36.639Z,1520550216.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:37.004Z,1520550217.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:37.031Z,1520550217.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:37.403Z,1520550217.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:37.429Z,1520550217.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:37.818Z,1520550217.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:37.833Z,1520550217.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:38.217Z,1520550218.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:38.232Z,1520550218.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:38.622Z,1520550218.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:38.637Z,1520550218.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:39.003Z,1520550219.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:39.029Z,1520550219.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:39.403Z,1520550219.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:39.430Z,1520550219.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:39.804Z,1520550219.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:39.829Z,1520550219.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:40.198Z,1520550220.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:40.230Z,1520550220.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:40.616Z,1520550220.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:40.641Z,1520550220.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:41.025Z,1520550221.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:41.040Z,1520550221.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:41.422Z,1520550221.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:41.437Z,1520550221.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:41.803Z,1520550221.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:41.830Z,1520550221.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:42.221Z,1520550222.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:42.250Z,1520550222.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:42.599Z,1520550222.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:42.635Z,1520550222.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:42.638Z,1520550222.638 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-08T22:58:42.4Z
2018-03-08T23:03:42.638Z,1520550222.638 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T23:03:42.638Z,1520550222.638 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T23:03:43.053Z,1520550223.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:43.106Z,1520550223.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:43.725Z,1520550223.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:43.789Z,1520550223.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:47.971Z,1520550227.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:48.035Z,1520550228.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:48.105Z,1520550228.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:48.147Z,1520550228.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:48.465Z,1520550228.465 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0356.lzma
2018-03-08T23:03:48.518Z,1520550228.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:48.534Z,1520550228.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:48.883Z,1520550228.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:48.910Z,1520550228.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:49.264Z,1520550229.264 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0356.lzma.bak
2018-03-08T23:03:49.264Z,1520550229.264 [DataOverHttps](INFO): SBD MOMSN=7989899
2018-03-08T23:03:49.285Z,1520550229.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:49.325Z,1520550229.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:49.882Z,1520550229.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:49.918Z,1520550229.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:50.087Z,1520550230.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:50.120Z,1520550230.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:53.215Z,1520550233.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:53.238Z,1520550233.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:53.342Z,1520550233.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:53.383Z,1520550233.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:53.738Z,1520550233.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:53.768Z,1520550233.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:54.118Z,1520550234.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:54.133Z,1520550234.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:54.527Z,1520550234.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:54.546Z,1520550234.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:54.927Z,1520550234.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:54.943Z,1520550234.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:55.323Z,1520550235.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:55.339Z,1520550235.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:58.434Z,1520550238.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:58.450Z,1520550238.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:58.568Z,1520550238.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:58.602Z,1520550238.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:58.916Z,1520550238.916 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180308T074127/Express0357.lzma
2018-03-08T23:03:58.950Z,1520550238.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:58.981Z,1520550238.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:59.335Z,1520550239.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:59.355Z,1520550239.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:03:59.708Z,1520550239.708 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0357.lzma.bak
2018-03-08T23:03:59.708Z,1520550239.708 [DataOverHttps](INFO): SBD MOMSN=7989901
2018-03-08T23:03:59.750Z,1520550239.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:03:59.781Z,1520550239.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:00.318Z,1520550240.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:00.338Z,1520550240.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:00.341Z,1520550240.341 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T23:04:00.341Z,1520550240.341 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T23:04:00.341Z,1520550240.341 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T23:04:00.546Z,1520550240.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:00.577Z,1520550240.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:03.653Z,1520550243.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:03.677Z,1520550243.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:03.785Z,1520550243.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:03.825Z,1520550243.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:04.132Z,1520550244.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:04.147Z,1520550244.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:04.532Z,1520550244.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:04.547Z,1520550244.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:04.938Z,1520550244.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:04.953Z,1520550244.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:05.335Z,1520550245.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:05.350Z,1520550245.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:05.737Z,1520550245.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:05.753Z,1520550245.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:06.136Z,1520550246.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:06.151Z,1520550246.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:06.538Z,1520550246.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:06.553Z,1520550246.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:06.934Z,1520550246.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:06.950Z,1520550246.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:07.328Z,1520550247.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:07.351Z,1520550247.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:07.738Z,1520550247.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:07.754Z,1520550247.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:08.130Z,1520550248.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:08.146Z,1520550248.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:08.537Z,1520550248.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:08.553Z,1520550248.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:08.938Z,1520550248.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:08.953Z,1520550248.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:09.337Z,1520550249.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:09.352Z,1520550249.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:09.724Z,1520550249.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:09.747Z,1520550249.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:10.138Z,1520550250.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:10.154Z,1520550250.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:10.535Z,1520550250.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:10.551Z,1520550250.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:10.941Z,1520550250.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:10.956Z,1520550250.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:11.341Z,1520550251.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:11.356Z,1520550251.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:11.742Z,1520550251.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:11.757Z,1520550251.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:12.127Z,1520550252.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:12.148Z,1520550252.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:12.541Z,1520550252.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:12.556Z,1520550252.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:12.939Z,1520550252.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:12.954Z,1520550252.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:13.325Z,1520550253.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:13.352Z,1520550253.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:13.745Z,1520550253.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:13.766Z,1520550253.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:14.145Z,1520550254.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:14.160Z,1520550254.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:14.541Z,1520550254.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:14.557Z,1520550254.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:14.931Z,1520550254.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:14.951Z,1520550254.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:15.319Z,1520550255.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:15.355Z,1520550255.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:15.720Z,1520550255.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:15.751Z,1520550255.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:16.126Z,1520550256.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:16.160Z,1520550256.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:16.523Z,1520550256.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:16.562Z,1520550256.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:16.946Z,1520550256.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:16.966Z,1520550256.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:17.345Z,1520550257.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:17.365Z,1520550257.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:17.745Z,1520550257.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:17.897Z,1520550257.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:18.117Z,1520550258.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:18.132Z,1520550258.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:18.526Z,1520550258.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:18.563Z,1520550258.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:18.929Z,1520550258.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:18.966Z,1520550258.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:19.321Z,1520550259.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:19.337Z,1520550259.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:19.757Z,1520550259.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:19.773Z,1520550259.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:20.142Z,1520550260.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:20.167Z,1520550260.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:20.530Z,1520550260.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:20.623Z,1520550260.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:20.924Z,1520550260.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:20.966Z,1520550260.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:21.331Z,1520550261.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:21.347Z,1520550261.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:21.724Z,1520550261.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:21.741Z,1520550261.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:22.135Z,1520550262.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:22.172Z,1520550262.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:22.531Z,1520550262.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:22.575Z,1520550262.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:22.942Z,1520550262.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:22.975Z,1520550262.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:23.350Z,1520550263.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:23.376Z,1520550263.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:23.746Z,1520550263.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:23.774Z,1520550263.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:24.119Z,1520550264.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:24.143Z,1520550264.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:24.532Z,1520550264.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:24.555Z,1520550264.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:24.935Z,1520550264.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:24.951Z,1520550264.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:25.328Z,1520550265.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:25.351Z,1520550265.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:25.746Z,1520550265.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:25.787Z,1520550265.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:26.145Z,1520550266.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:26.185Z,1520550266.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:26.531Z,1520550266.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:26.547Z,1520550266.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:26.930Z,1520550266.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:26.946Z,1520550266.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:27.327Z,1520550267.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:27.343Z,1520550267.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:27.729Z,1520550267.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:27.745Z,1520550267.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:28.135Z,1520550268.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:28.155Z,1520550268.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:28.534Z,1520550268.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:28.550Z,1520550268.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:28.938Z,1520550268.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:28.954Z,1520550268.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:29.342Z,1520550269.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:29.357Z,1520550269.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:29.738Z,1520550269.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:29.753Z,1520550269.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:30.123Z,1520550270.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:30.147Z,1520550270.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:30.536Z,1520550270.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:30.551Z,1520550270.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:30.938Z,1520550270.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:30.953Z,1520550270.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:31.327Z,1520550271.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:31.347Z,1520550271.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:31.741Z,1520550271.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:31.757Z,1520550271.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:32.142Z,1520550272.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:32.157Z,1520550272.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:32.538Z,1520550272.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:32.555Z,1520550272.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:32.930Z,1520550272.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:32.951Z,1520550272.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:33.327Z,1520550273.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:33.343Z,1520550273.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:33.724Z,1520550273.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:33.755Z,1520550273.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:34.138Z,1520550274.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:34.154Z,1520550274.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:34.537Z,1520550274.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:34.552Z,1520550274.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:34.941Z,1520550274.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:34.956Z,1520550274.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:35.341Z,1520550275.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:35.356Z,1520550275.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:35.741Z,1520550275.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:35.756Z,1520550275.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:36.128Z,1520550276.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:36.151Z,1520550276.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:36.531Z,1520550276.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:36.555Z,1520550276.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:36.939Z,1520550276.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:36.954Z,1520550276.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:37.324Z,1520550277.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:37.356Z,1520550277.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:37.740Z,1520550277.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:37.756Z,1520550277.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:38.141Z,1520550278.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:38.156Z,1520550278.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:38.537Z,1520550278.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:38.567Z,1520550278.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:38.935Z,1520550278.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:38.955Z,1520550278.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:39.333Z,1520550279.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:39.348Z,1520550279.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:39.720Z,1520550279.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:39.755Z,1520550279.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:40.139Z,1520550280.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:40.155Z,1520550280.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:40.532Z,1520550280.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:40.548Z,1520550280.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:40.945Z,1520550280.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:40.966Z,1520550280.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:41.346Z,1520550281.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:41.366Z,1520550281.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:41.745Z,1520550281.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:41.766Z,1520550281.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:42.117Z,1520550282.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:42.144Z,1520550282.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:42.535Z,1520550282.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:42.550Z,1520550282.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:42.929Z,1520550282.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:42.953Z,1520550282.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:43.323Z,1520550283.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:43.357Z,1520550283.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:43.741Z,1520550283.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:43.762Z,1520550283.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:44.156Z,1520550284.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:44.179Z,1520550284.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:44.529Z,1520550284.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:44.568Z,1520550284.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:44.926Z,1520550284.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:44.954Z,1520550284.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:45.323Z,1520550285.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:45.359Z,1520550285.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:45.716Z,1520550285.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:45.731Z,1520550285.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:46.126Z,1520550286.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:46.164Z,1520550286.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:46.523Z,1520550286.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:46.539Z,1520550286.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:46.938Z,1520550286.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:46.965Z,1520550286.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:47.354Z,1520550287.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:47.369Z,1520550287.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:47.755Z,1520550287.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:47.771Z,1520550287.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:48.120Z,1520550288.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:48.136Z,1520550288.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:48.530Z,1520550288.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:48.565Z,1520550288.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:48.934Z,1520550288.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:48.970Z,1520550288.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:49.323Z,1520550289.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:49.339Z,1520550289.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:49.742Z,1520550289.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:49.765Z,1520550289.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:50.146Z,1520550290.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:50.173Z,1520550290.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:50.546Z,1520550290.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:50.578Z,1520550290.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:50.932Z,1520550290.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:50.967Z,1520550290.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:51.331Z,1520550291.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:51.374Z,1520550291.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:51.728Z,1520550291.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:51.744Z,1520550291.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:52.135Z,1520550292.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:52.151Z,1520550292.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:52.532Z,1520550292.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:52.548Z,1520550292.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:52.934Z,1520550292.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:52.950Z,1520550292.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:53.346Z,1520550293.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:53.377Z,1520550293.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:53.742Z,1520550293.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:53.758Z,1520550293.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:54.134Z,1520550294.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:54.150Z,1520550294.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:54.536Z,1520550294.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:54.551Z,1520550294.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:54.935Z,1520550294.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:54.979Z,1520550294.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:55.323Z,1520550295.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:55.347Z,1520550295.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:55.743Z,1520550295.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:55.758Z,1520550295.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:56.142Z,1520550296.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:56.157Z,1520550296.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:56.541Z,1520550296.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:56.563Z,1520550296.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:56.936Z,1520550296.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:56.951Z,1520550296.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:57.327Z,1520550297.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:57.359Z,1520550297.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:57.737Z,1520550297.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:57.753Z,1520550297.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:58.132Z,1520550298.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:58.156Z,1520550298.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:58.539Z,1520550298.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:58.555Z,1520550298.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:58.941Z,1520550298.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:58.963Z,1520550298.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:59.351Z,1520550299.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:59.366Z,1520550299.366 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:59.367Z,1520550299.367 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 306
2018-03-08T23:04:59.367Z,1520550299.367 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T23:04:59.369Z,1520550299.369 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:59.369Z,1520550299.369 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 306
2018-03-08T23:04:59.369Z,1520550299.369 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T23:04:59.370Z,1520550299.370 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:04:59.371Z,1520550299.371 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 306
2018-03-08T23:04:59.371Z,1520550299.371 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T23:04:59.398Z,1520550299.398 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T23:04:59.398Z,1520550299.398 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T23:04:59.398Z,1520550299.398 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T23:04:59.741Z,1520550299.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:04:59.801Z,1520550299.801 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T23:04:59.801Z,1520550299.801 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 306
2018-03-08T23:04:59.801Z,1520550299.801 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T23:04:59.802Z,1520550299.802 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 306
2018-03-08T23:04:59.802Z,1520550299.802 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T23:04:59.802Z,1520550299.802 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 306
2018-03-08T23:05:00.122Z,1520550300.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:00.159Z,1520550300.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T23:05:00.159Z,1520550300.159 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T23:05:00.159Z,1520550300.159 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T23:05:00.160Z,1520550300.160 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T23:05:00.160Z,1520550300.160 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T23:05:00.165Z,1520550300.165 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T23:05:00.165Z,1520550300.165 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T23:05:00.165Z,1520550300.165 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T23:05:00.166Z,1520550300.166 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T23:05:00.529Z,1520550300.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:00.550Z,1520550300.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T23:05:00.551Z,1520550300.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:00.936Z,1520550300.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:00.958Z,1520550300.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-08T23:05:00.959Z,1520550300.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:04.028Z,1520550304.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:04.062Z,1520550304.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2018-03-08T23:05:04.063Z,1520550304.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:04.161Z,1520550304.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:04.209Z,1520550304.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T23:05:04.210Z,1520550304.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:04.534Z,1520550304.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:04.559Z,1520550304.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T23:05:04.560Z,1520550304.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:04.929Z,1520550304.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:04.957Z,1520550304.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T23:05:04.958Z,1520550304.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:05.321Z,1520550305.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:05.336Z,1520550305.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T23:05:05.337Z,1520550305.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:05.717Z,1520550305.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:05.732Z,1520550305.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T23:05:05.733Z,1520550305.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:06.120Z,1520550306.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:06.135Z,1520550306.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T23:05:06.136Z,1520550306.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:06.524Z,1520550306.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:06.539Z,1520550306.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T23:05:06.540Z,1520550306.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:06.924Z,1520550306.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:06.939Z,1520550306.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T23:05:06.940Z,1520550306.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:07.326Z,1520550307.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:07.341Z,1520550307.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-08T23:05:07.342Z,1520550307.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:07.722Z,1520550307.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:07.737Z,1520550307.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T23:05:07.738Z,1520550307.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:08.122Z,1520550308.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:08.137Z,1520550308.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T23:05:08.138Z,1520550308.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:08.522Z,1520550308.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:08.538Z,1520550308.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T23:05:08.539Z,1520550308.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:08.923Z,1520550308.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:08.939Z,1520550308.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T23:05:08.939Z,1520550308.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:09.322Z,1520550309.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:09.337Z,1520550309.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T23:05:09.338Z,1520550309.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:09.725Z,1520550309.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:09.741Z,1520550309.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T23:05:09.742Z,1520550309.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:10.130Z,1520550310.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:10.168Z,1520550310.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T23:05:10.169Z,1520550310.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:10.523Z,1520550310.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:10.546Z,1520550310.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T23:05:10.547Z,1520550310.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:10.922Z,1520550310.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:10.938Z,1520550310.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T23:05:10.939Z,1520550310.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:11.319Z,1520550311.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:11.339Z,1520550311.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T23:05:11.340Z,1520550311.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:11.724Z,1520550311.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:11.739Z,1520550311.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T23:05:11.741Z,1520550311.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:12.120Z,1520550312.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:12.136Z,1520550312.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T23:05:12.137Z,1520550312.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:12.524Z,1520550312.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:12.539Z,1520550312.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T23:05:12.540Z,1520550312.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:12.929Z,1520550312.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:12.944Z,1520550312.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T23:05:12.945Z,1520550312.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:13.325Z,1520550313.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:13.346Z,1520550313.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T23:05:13.347Z,1520550313.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:13.719Z,1520550313.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:13.734Z,1520550313.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T23:05:13.735Z,1520550313.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:14.122Z,1520550314.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:14.137Z,1520550314.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T23:05:14.138Z,1520550314.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:14.523Z,1520550314.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:14.539Z,1520550314.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T23:05:14.540Z,1520550314.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:14.923Z,1520550314.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:14.942Z,1520550314.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T23:05:14.943Z,1520550314.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:15.322Z,1520550315.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:15.337Z,1520550315.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T23:05:15.338Z,1520550315.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:15.729Z,1520550315.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:15.745Z,1520550315.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T23:05:15.746Z,1520550315.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:16.128Z,1520550316.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:16.143Z,1520550316.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T23:05:16.144Z,1520550316.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:16.528Z,1520550316.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:16.543Z,1520550316.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T23:05:16.544Z,1520550316.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:16.925Z,1520550316.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:16.940Z,1520550316.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T23:05:16.941Z,1520550316.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:17.319Z,1520550317.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:17.334Z,1520550317.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T23:05:17.335Z,1520550317.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:17.726Z,1520550317.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:17.741Z,1520550317.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T23:05:17.742Z,1520550317.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:18.124Z,1520550318.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:18.139Z,1520550318.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T23:05:18.141Z,1520550318.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:18.528Z,1520550318.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:18.550Z,1520550318.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T23:05:18.551Z,1520550318.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:18.929Z,1520550318.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:18.945Z,1520550318.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T23:05:18.946Z,1520550318.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:19.329Z,1520550319.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:19.350Z,1520550319.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T23:05:19.351Z,1520550319.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:19.724Z,1520550319.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:19.740Z,1520550319.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:20.117Z,1520550320.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:20.143Z,1520550320.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:20.508Z,1520550320.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:20.536Z,1520550320.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:20.921Z,1520550320.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:20.945Z,1520550320.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:21.321Z,1520550321.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:21.336Z,1520550321.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:21.738Z,1520550321.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:21.759Z,1520550321.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:22.137Z,1520550322.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:22.158Z,1520550322.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:22.534Z,1520550322.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:22.549Z,1520550322.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:22.924Z,1520550322.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:22.940Z,1520550322.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:23.311Z,1520550323.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:23.343Z,1520550323.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:23.725Z,1520550323.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:23.742Z,1520550323.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:24.111Z,1520550324.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:24.139Z,1520550324.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:24.533Z,1520550324.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:24.555Z,1520550324.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:24.937Z,1520550324.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:24.952Z,1520550324.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:25.339Z,1520550325.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:25.354Z,1520550325.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:25.715Z,1520550325.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:25.741Z,1520550325.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:26.106Z,1520550326.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:26.139Z,1520550326.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:26.516Z,1520550326.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:26.550Z,1520550326.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:26.914Z,1520550326.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:26.942Z,1520550326.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:27.306Z,1520550327.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:27.339Z,1520550327.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:27.739Z,1520550327.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:27.754Z,1520550327.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:28.134Z,1520550328.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:28.149Z,1520550328.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:28.526Z,1520550328.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:28.547Z,1520550328.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:28.915Z,1520550328.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:28.943Z,1520550328.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:29.315Z,1520550329.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:29.342Z,1520550329.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:29.712Z,1520550329.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:29.741Z,1520550329.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:30.111Z,1520550330.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:30.139Z,1520550330.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:30.534Z,1520550330.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:30.550Z,1520550330.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:30.941Z,1520550330.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:30.956Z,1520550330.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:31.335Z,1520550331.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:31.354Z,1520550331.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:31.715Z,1520550331.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:31.742Z,1520550331.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:32.106Z,1520550332.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:32.141Z,1520550332.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:32.511Z,1520550332.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:32.544Z,1520550332.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:32.927Z,1520550332.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:32.942Z,1520550332.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:33.306Z,1520550333.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:33.345Z,1520550333.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:33.738Z,1520550333.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:33.754Z,1520550333.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:34.134Z,1520550334.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:34.149Z,1520550334.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:34.530Z,1520550334.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:34.545Z,1520550334.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:34.911Z,1520550334.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:34.939Z,1520550334.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:35.315Z,1520550335.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:35.343Z,1520550335.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:35.713Z,1520550335.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:35.750Z,1520550335.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:36.109Z,1520550336.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:36.147Z,1520550336.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:36.535Z,1520550336.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:36.550Z,1520550336.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:36.940Z,1520550336.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:36.955Z,1520550336.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:37.329Z,1520550337.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:37.350Z,1520550337.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:37.715Z,1520550337.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:37.748Z,1520550337.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:38.112Z,1520550338.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:38.136Z,1520550338.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:38.509Z,1520550338.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:38.524Z,1520550338.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:38.922Z,1520550338.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:38.957Z,1520550338.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:39.315Z,1520550339.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:39.330Z,1520550339.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:39.717Z,1520550339.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:39.733Z,1520550339.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:40.134Z,1520550340.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:40.160Z,1520550340.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:40.529Z,1520550340.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:40.562Z,1520550340.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:40.912Z,1520550340.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:40.928Z,1520550340.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:41.323Z,1520550341.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:41.339Z,1520550341.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:41.718Z,1520550341.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:41.734Z,1520550341.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:42.116Z,1520550342.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:42.132Z,1520550342.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:42.542Z,1520550342.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:42.568Z,1520550342.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:42.933Z,1520550342.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:42.965Z,1520550342.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:43.323Z,1520550343.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:43.339Z,1520550343.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:43.727Z,1520550343.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:43.772Z,1520550343.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:44.120Z,1520550344.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:44.148Z,1520550344.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:44.519Z,1520550344.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:44.535Z,1520550344.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:44.937Z,1520550344.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:44.972Z,1520550344.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:45.318Z,1520550345.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:45.336Z,1520550345.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:45.734Z,1520550345.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:45.749Z,1520550345.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:46.134Z,1520550346.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:46.155Z,1520550346.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:46.534Z,1520550346.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:46.555Z,1520550346.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:46.915Z,1520550346.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:46.942Z,1520550346.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:47.311Z,1520550347.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:47.347Z,1520550347.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:47.717Z,1520550347.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:47.747Z,1520550347.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:48.107Z,1520550348.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:48.130Z,1520550348.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:48.534Z,1520550348.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:48.549Z,1520550348.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:48.921Z,1520550348.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:48.948Z,1520550348.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:49.321Z,1520550349.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:49.353Z,1520550349.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:49.711Z,1520550349.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:49.727Z,1520550349.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:50.114Z,1520550350.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:50.129Z,1520550350.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:50.508Z,1520550350.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:50.523Z,1520550350.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:50.921Z,1520550350.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:50.957Z,1520550350.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:51.314Z,1520550351.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:51.329Z,1520550351.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:51.725Z,1520550351.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:51.757Z,1520550351.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:52.129Z,1520550352.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:52.161Z,1520550352.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:52.529Z,1520550352.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:52.562Z,1520550352.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:52.911Z,1520550352.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:52.927Z,1520550352.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:53.319Z,1520550353.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:53.339Z,1520550353.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:53.717Z,1520550353.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:53.732Z,1520550353.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:54.115Z,1520550354.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:54.131Z,1520550354.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:54.530Z,1520550354.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:54.568Z,1520550354.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:54.924Z,1520550354.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:54.939Z,1520550354.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:55.325Z,1520550355.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:55.341Z,1520550355.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:55.719Z,1520550355.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:55.739Z,1520550355.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:56.118Z,1520550356.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:56.134Z,1520550356.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:56.517Z,1520550356.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:56.532Z,1520550356.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:56.923Z,1520550356.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:56.938Z,1520550356.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:57.321Z,1520550357.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:57.337Z,1520550357.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:57.725Z,1520550357.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:57.741Z,1520550357.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:58.129Z,1520550358.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:58.166Z,1520550358.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:58.525Z,1520550358.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:58.546Z,1520550358.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:58.917Z,1520550358.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:58.932Z,1520550358.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:59.318Z,1520550359.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:59.338Z,1520550359.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:05:59.725Z,1520550359.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:05:59.740Z,1520550359.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:00.122Z,1520550360.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:00.138Z,1520550360.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:00.528Z,1520550360.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:00.543Z,1520550360.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:00.929Z,1520550360.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:00.948Z,1520550360.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:01.330Z,1520550361.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:01.346Z,1520550361.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:04.427Z,1520550364.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:04.446Z,1520550364.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:04.549Z,1520550364.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:04.576Z,1520550364.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:04.928Z,1520550364.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:04.951Z,1520550364.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:05.329Z,1520550365.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:05.350Z,1520550365.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:05.730Z,1520550365.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:05.745Z,1520550365.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:06.123Z,1520550366.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:06.139Z,1520550366.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:06.515Z,1520550366.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:06.551Z,1520550366.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:06.927Z,1520550366.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:06.943Z,1520550366.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:07.319Z,1520550367.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:07.339Z,1520550367.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:07.733Z,1520550367.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:07.754Z,1520550367.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:08.132Z,1520550368.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:08.147Z,1520550368.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:08.529Z,1520550368.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:08.550Z,1520550368.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:08.925Z,1520550368.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:08.941Z,1520550368.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:09.319Z,1520550369.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:09.339Z,1520550369.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:09.719Z,1520550369.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:09.739Z,1520550369.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:10.120Z,1520550370.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:10.148Z,1520550370.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:10.522Z,1520550370.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:10.539Z,1520550370.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:10.934Z,1520550370.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:10.950Z,1520550370.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:11.334Z,1520550371.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:11.350Z,1520550371.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:11.730Z,1520550371.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:11.837Z,1520550371.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:12.124Z,1520550372.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:12.140Z,1520550372.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:12.511Z,1520550372.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:12.547Z,1520550372.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:12.928Z,1520550372.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:12.952Z,1520550372.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:13.310Z,1520550373.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:13.349Z,1520550373.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:13.736Z,1520550373.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:13.752Z,1520550373.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:14.137Z,1520550374.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:14.161Z,1520550374.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:14.537Z,1520550374.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:14.569Z,1520550374.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:14.920Z,1520550374.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:14.936Z,1520550374.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:15.321Z,1520550375.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:15.371Z,1520550375.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:15.728Z,1520550375.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:15.775Z,1520550375.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:16.126Z,1520550376.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:16.143Z,1520550376.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:16.591Z,1520550376.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:16.647Z,1520550376.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:16.925Z,1520550376.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:16.942Z,1520550376.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:17.329Z,1520550377.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:17.346Z,1520550377.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:17.726Z,1520550377.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:17.743Z,1520550377.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:18.123Z,1520550378.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:18.139Z,1520550378.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:18.525Z,1520550378.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:18.541Z,1520550378.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:18.916Z,1520550378.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:18.940Z,1520550378.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:19.323Z,1520550379.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:19.339Z,1520550379.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:19.730Z,1520550379.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:19.746Z,1520550379.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:20.129Z,1520550380.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:20.150Z,1520550380.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:20.533Z,1520550380.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:20.554Z,1520550380.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:20.924Z,1520550380.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:20.943Z,1520550380.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:21.324Z,1520550381.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:21.339Z,1520550381.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:21.711Z,1520550381.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:21.750Z,1520550381.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:22.126Z,1520550382.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:22.142Z,1520550382.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:22.523Z,1520550382.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:22.540Z,1520550382.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:22.929Z,1520550382.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:22.950Z,1520550382.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:23.338Z,1520550383.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:23.353Z,1520550383.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:23.737Z,1520550383.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:23.752Z,1520550383.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:24.123Z,1520550384.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:24.139Z,1520550384.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:24.507Z,1520550384.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:24.539Z,1520550384.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:24.918Z,1520550384.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:24.946Z,1520550384.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:25.312Z,1520550385.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:25.351Z,1520550385.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:25.735Z,1520550385.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:25.751Z,1520550385.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:26.121Z,1520550386.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:26.154Z,1520550386.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:26.521Z,1520550386.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:26.549Z,1520550386.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:26.911Z,1520550386.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:26.949Z,1520550386.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:27.315Z,1520550387.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:27.352Z,1520550387.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:27.711Z,1520550387.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:27.738Z,1520550387.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:28.113Z,1520550388.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:28.156Z,1520550388.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:28.515Z,1520550388.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:28.551Z,1520550388.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:28.921Z,1520550388.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:28.948Z,1520550388.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:29.325Z,1520550389.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:29.355Z,1520550389.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:29.738Z,1520550389.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:29.754Z,1520550389.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:30.111Z,1520550390.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:30.126Z,1520550390.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:30.519Z,1520550390.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:30.557Z,1520550390.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:30.915Z,1520550390.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:30.930Z,1520550390.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:31.311Z,1520550391.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:31.327Z,1520550391.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:31.724Z,1520550391.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:31.760Z,1520550391.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:32.126Z,1520550392.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:32.157Z,1520550392.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:32.529Z,1520550392.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:32.558Z,1520550392.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:32.919Z,1520550392.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:32.934Z,1520550392.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:33.312Z,1520550393.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:33.327Z,1520550393.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:33.719Z,1520550393.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:33.755Z,1520550393.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:34.122Z,1520550394.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:34.138Z,1520550394.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:34.519Z,1520550394.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:34.535Z,1520550394.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:34.934Z,1520550394.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:34.957Z,1520550394.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:35.321Z,1520550395.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:35.336Z,1520550395.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:35.729Z,1520550395.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:35.759Z,1520550395.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:36.116Z,1520550396.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:36.136Z,1520550396.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:36.517Z,1520550396.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:36.539Z,1520550396.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:36.924Z,1520550396.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:36.940Z,1520550396.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:37.323Z,1520550397.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:37.338Z,1520550397.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:37.725Z,1520550397.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:37.741Z,1520550397.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:38.125Z,1520550398.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:38.141Z,1520550398.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:38.525Z,1520550398.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:38.541Z,1520550398.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:38.915Z,1520550398.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:38.931Z,1520550398.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:39.322Z,1520550399.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:39.338Z,1520550399.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:39.723Z,1520550399.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:39.739Z,1520550399.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:40.119Z,1520550400.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:40.135Z,1520550400.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:40.522Z,1520550400.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:40.538Z,1520550400.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:40.924Z,1520550400.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:40.947Z,1520550400.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:41.328Z,1520550401.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:41.343Z,1520550401.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:41.726Z,1520550401.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:41.742Z,1520550401.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:42.123Z,1520550402.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:42.139Z,1520550402.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:42.523Z,1520550402.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:42.538Z,1520550402.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:42.925Z,1520550402.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:42.941Z,1520550402.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:43.319Z,1520550403.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:43.334Z,1520550403.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:43.733Z,1520550403.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:43.761Z,1520550403.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:44.138Z,1520550404.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:44.153Z,1520550404.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:44.534Z,1520550404.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:44.549Z,1520550404.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:44.911Z,1520550404.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:44.948Z,1520550404.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:45.315Z,1520550405.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:45.347Z,1520550405.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:45.711Z,1520550405.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:45.747Z,1520550405.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:46.114Z,1520550406.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:46.149Z,1520550406.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:46.513Z,1520550406.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:46.528Z,1520550406.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:46.925Z,1520550406.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:46.952Z,1520550406.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:47.325Z,1520550407.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:47.354Z,1520550407.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:47.725Z,1520550407.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:47.752Z,1520550407.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:48.119Z,1520550408.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:48.155Z,1520550408.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:48.515Z,1520550408.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:48.530Z,1520550408.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:48.915Z,1520550408.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:48.931Z,1520550408.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:49.318Z,1520550409.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:49.334Z,1520550409.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:49.729Z,1520550409.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:49.753Z,1520550409.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:50.125Z,1520550410.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:50.141Z,1520550410.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:50.534Z,1520550410.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:50.565Z,1520550410.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:50.914Z,1520550410.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:50.954Z,1520550410.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:51.312Z,1520550411.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:51.335Z,1520550411.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:51.717Z,1520550411.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:51.738Z,1520550411.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:52.123Z,1520550412.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:52.138Z,1520550412.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:52.507Z,1520550412.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:52.547Z,1520550412.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:52.935Z,1520550412.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:52.966Z,1520550412.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:53.331Z,1520550413.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:53.346Z,1520550413.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:53.721Z,1520550413.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:53.745Z,1520550413.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:54.123Z,1520550414.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:54.140Z,1520550414.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:54.523Z,1520550414.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:54.538Z,1520550414.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:54.917Z,1520550414.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:54.939Z,1520550414.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:55.329Z,1520550415.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:55.345Z,1520550415.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:55.729Z,1520550415.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:55.745Z,1520550415.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:56.129Z,1520550416.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:56.150Z,1520550416.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:56.528Z,1520550416.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:56.550Z,1520550416.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:56.924Z,1520550416.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:56.940Z,1520550416.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:57.308Z,1520550417.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:57.340Z,1520550417.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:57.723Z,1520550417.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:57.738Z,1520550417.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:58.121Z,1520550418.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:58.151Z,1520550418.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:58.508Z,1520550418.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:58.543Z,1520550418.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:58.926Z,1520550418.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:58.948Z,1520550418.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:59.337Z,1520550419.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:59.352Z,1520550419.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:06:59.722Z,1520550419.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:06:59.753Z,1520550419.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:00.123Z,1520550420.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:00.139Z,1520550420.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:00.507Z,1520550420.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:00.545Z,1520550420.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:00.912Z,1520550420.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:00.947Z,1520550420.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:01.311Z,1520550421.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:01.338Z,1520550421.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:04.396Z,1520550424.396 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-08T23:07:04.396Z,1520550424.396 [NAL9602] Data Fault, FailCount= 5
2018-03-08T23:07:04.396Z,1520550424.396 [NAL9602](ERROR): Data Fault
2018-03-08T23:07:04.413Z,1520550424.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:04.448Z,1520550424.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:04.461Z,1520550424.461 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-08T23:07:04.461Z,1520550424.461 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-08T23:07:04.521Z,1520550424.521 [NAL9602](INFO): Powering down
2018-03-08T23:07:04.539Z,1520550424.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:04.591Z,1520550424.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:04.614Z,1520550424.614 [CBIT](INFO): Critical error at 20180308T230704
2018-03-08T23:07:04.902Z,1520550424.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:04.943Z,1520550424.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:05.302Z,1520550425.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:05.317Z,1520550425.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:05.695Z,1520550425.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:05.711Z,1520550425.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:06.099Z,1520550426.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:06.118Z,1520550426.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:06.503Z,1520550426.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:06.518Z,1520550426.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:06.899Z,1520550426.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:06.914Z,1520550426.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:07.303Z,1520550427.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:07.318Z,1520550427.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:07.696Z,1520550427.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:07.711Z,1520550427.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:08.103Z,1520550428.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:08.118Z,1520550428.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:08.499Z,1520550428.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:08.522Z,1520550428.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:08.902Z,1520550428.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:08.917Z,1520550428.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:09.298Z,1520550429.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:09.314Z,1520550429.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:09.699Z,1520550429.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:09.715Z,1520550429.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:10.098Z,1520550430.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:10.113Z,1520550430.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:10.503Z,1520550430.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:10.518Z,1520550430.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:10.899Z,1520550430.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:10.914Z,1520550430.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:11.303Z,1520550431.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:11.318Z,1520550431.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:11.695Z,1520550431.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:11.710Z,1520550431.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:12.103Z,1520550432.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:12.118Z,1520550432.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:12.497Z,1520550432.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:12.513Z,1520550432.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:12.897Z,1520550432.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:12.912Z,1520550432.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:13.303Z,1520550433.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:13.322Z,1520550433.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:13.703Z,1520550433.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:13.717Z,1520550433.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:14.103Z,1520550434.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:14.118Z,1520550434.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:14.503Z,1520550434.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:14.518Z,1520550434.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:14.902Z,1520550434.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:14.917Z,1520550434.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:15.300Z,1520550435.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:15.315Z,1520550435.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:15.700Z,1520550435.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:15.719Z,1520550435.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:16.104Z,1520550436.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:16.119Z,1520550436.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:16.505Z,1520550436.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:16.520Z,1520550436.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:16.905Z,1520550436.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:16.920Z,1520550436.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:17.305Z,1520550437.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:17.320Z,1520550437.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:17.699Z,1520550437.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:17.714Z,1520550437.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:18.106Z,1520550438.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:18.121Z,1520550438.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:18.497Z,1520550438.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:18.518Z,1520550438.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:18.897Z,1520550438.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:18.913Z,1520550438.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:19.307Z,1520550439.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:19.323Z,1520550439.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:19.705Z,1520550439.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:19.719Z,1520550439.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:20.105Z,1520550440.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:20.120Z,1520550440.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:20.505Z,1520550440.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:20.521Z,1520550440.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:20.902Z,1520550440.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:20.917Z,1520550440.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:21.301Z,1520550441.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:21.317Z,1520550441.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:21.705Z,1520550441.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:21.720Z,1520550441.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:22.098Z,1520550442.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:22.113Z,1520550442.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:22.505Z,1520550442.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:22.521Z,1520550442.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:22.905Z,1520550442.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:22.921Z,1520550442.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:23.304Z,1520550443.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:23.319Z,1520550443.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:23.700Z,1520550443.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:23.715Z,1520550443.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:24.106Z,1520550444.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:24.122Z,1520550444.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:24.505Z,1520550444.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:24.520Z,1520550444.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:24.906Z,1520550444.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:24.921Z,1520550444.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:25.306Z,1520550445.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:25.321Z,1520550445.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:25.698Z,1520550445.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:25.713Z,1520550445.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:26.102Z,1520550446.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:26.118Z,1520550446.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:26.508Z,1520550446.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:26.523Z,1520550446.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:26.907Z,1520550446.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:26.922Z,1520550446.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:27.301Z,1520550447.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:27.317Z,1520550447.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:27.704Z,1520550447.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:27.719Z,1520550447.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:28.099Z,1520550448.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:28.113Z,1520550448.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:28.506Z,1520550448.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:28.521Z,1520550448.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:28.907Z,1520550448.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:28.922Z,1520550448.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:29.306Z,1520550449.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:29.321Z,1520550449.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:29.700Z,1520550449.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:29.716Z,1520550449.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:30.106Z,1520550450.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:30.122Z,1520550450.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:30.505Z,1520550450.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:30.521Z,1520550450.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:30.906Z,1520550450.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:30.923Z,1520550450.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:31.305Z,1520550451.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:31.320Z,1520550451.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:31.699Z,1520550451.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:31.718Z,1520550451.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:32.105Z,1520550452.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:32.121Z,1520550452.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:32.502Z,1520550452.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:32.517Z,1520550452.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:32.897Z,1520550452.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:32.913Z,1520550452.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:33.294Z,1520550453.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:33.310Z,1520550453.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:33.702Z,1520550453.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:33.717Z,1520550453.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:34.104Z,1520550454.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:34.119Z,1520550454.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:34.505Z,1520550454.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:34.520Z,1520550454.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:34.900Z,1520550454.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:34.927Z,1520550454.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:35.305Z,1520550455.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:35.319Z,1520550455.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:35.699Z,1520550455.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:35.715Z,1520550455.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:36.104Z,1520550456.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:36.119Z,1520550456.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:36.505Z,1520550456.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:36.520Z,1520550456.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:36.905Z,1520550456.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:36.920Z,1520550456.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:37.300Z,1520550457.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:37.345Z,1520550457.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:37.704Z,1520550457.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:37.719Z,1520550457.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:38.099Z,1520550458.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:38.114Z,1520550458.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:38.505Z,1520550458.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:38.520Z,1520550458.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:38.905Z,1520550458.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:38.919Z,1520550458.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:39.299Z,1520550459.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:39.315Z,1520550459.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:39.705Z,1520550459.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:39.719Z,1520550459.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:40.104Z,1520550460.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:40.119Z,1520550460.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:40.505Z,1520550460.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:40.521Z,1520550460.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:40.901Z,1520550460.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:40.916Z,1520550460.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:41.305Z,1520550461.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:41.320Z,1520550461.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:41.701Z,1520550461.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:41.716Z,1520550461.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:42.117Z,1520550462.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:42.132Z,1520550462.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:42.500Z,1520550462.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:42.523Z,1520550462.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:42.896Z,1520550462.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:42.935Z,1520550462.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:43.296Z,1520550463.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:43.330Z,1520550463.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:43.691Z,1520550463.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:43.722Z,1520550463.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:44.090Z,1520550464.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:44.121Z,1520550464.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:44.493Z,1520550464.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:44.541Z,1520550464.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:44.894Z,1520550464.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:44.926Z,1520550464.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:45.296Z,1520550465.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:45.340Z,1520550465.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:45.694Z,1520550465.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:45.730Z,1520550465.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:46.101Z,1520550466.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:46.127Z,1520550466.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:46.491Z,1520550466.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:46.519Z,1520550466.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:46.898Z,1520550466.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:46.930Z,1520550466.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:47.298Z,1520550467.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:47.331Z,1520550467.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:47.688Z,1520550467.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:47.703Z,1520550467.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:48.098Z,1520550468.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:48.134Z,1520550468.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:48.498Z,1520550468.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:48.538Z,1520550468.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:48.898Z,1520550468.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:48.929Z,1520550468.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:49.298Z,1520550469.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:49.312Z,1520550469.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:49.695Z,1520550469.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:49.711Z,1520550469.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:50.103Z,1520550470.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:50.118Z,1520550470.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:50.502Z,1520550470.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:50.516Z,1520550470.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:50.902Z,1520550470.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:50.922Z,1520550470.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:51.294Z,1520550471.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:51.310Z,1520550471.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:51.698Z,1520550471.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:51.713Z,1520550471.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:52.102Z,1520550472.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:52.119Z,1520550472.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:52.498Z,1520550472.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:52.513Z,1520550472.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:52.903Z,1520550472.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:52.918Z,1520550472.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:53.299Z,1520550473.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:53.319Z,1520550473.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:53.695Z,1520550473.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:53.711Z,1520550473.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:54.100Z,1520550474.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:54.115Z,1520550474.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:54.499Z,1520550474.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:54.515Z,1520550474.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:54.901Z,1520550474.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:54.916Z,1520550474.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:55.300Z,1520550475.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:55.315Z,1520550475.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:55.703Z,1520550475.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:55.726Z,1520550475.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:56.103Z,1520550476.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:56.118Z,1520550476.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:56.503Z,1520550476.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:56.517Z,1520550476.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:56.900Z,1520550476.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:56.924Z,1520550476.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:57.305Z,1520550477.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:57.320Z,1520550477.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:57.705Z,1520550477.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:57.719Z,1520550477.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:58.105Z,1520550478.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:58.126Z,1520550478.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:58.505Z,1520550478.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:58.520Z,1520550478.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:58.904Z,1520550478.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:58.919Z,1520550478.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:59.305Z,1520550479.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:59.320Z,1520550479.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:07:59.706Z,1520550479.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:07:59.721Z,1520550479.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:00.104Z,1520550480.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:00.119Z,1520550480.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:00.494Z,1520550480.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:00.530Z,1520550480.530 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:00.531Z,1520550480.531 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 307
2018-03-08T23:08:00.531Z,1520550480.531 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-08T23:08:00.537Z,1520550480.537 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:00.537Z,1520550480.537 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 307
2018-03-08T23:08:00.537Z,1520550480.537 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-08T23:08:00.539Z,1520550480.539 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:00.539Z,1520550480.539 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 307
2018-03-08T23:08:00.539Z,1520550480.539 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T23:08:00.559Z,1520550480.559 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-08T23:08:00.560Z,1520550480.560 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-08T23:08:00.560Z,1520550480.560 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T23:08:00.899Z,1520550480.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:00.941Z,1520550480.941 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-08T23:08:00.941Z,1520550480.941 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 307
2018-03-08T23:08:00.942Z,1520550480.942 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-08T23:08:00.942Z,1520550480.942 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 307
2018-03-08T23:08:00.942Z,1520550480.942 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T23:08:00.943Z,1520550480.943 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 307
2018-03-08T23:08:01.298Z,1520550481.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:01.333Z,1520550481.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-08T23:08:01.334Z,1520550481.334 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T23:08:01.334Z,1520550481.334 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T23:08:01.335Z,1520550481.335 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-08T23:08:01.335Z,1520550481.335 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T23:08:01.335Z,1520550481.335 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T23:08:01.336Z,1520550481.336 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T23:08:01.336Z,1520550481.336 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T23:08:01.337Z,1520550481.337 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T23:08:01.699Z,1520550481.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:01.723Z,1520550481.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-08T23:08:01.724Z,1520550481.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:04.800Z,1520550484.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:04.816Z,1520550484.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2018-03-08T23:08:04.817Z,1520550484.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:04.910Z,1520550484.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:04.953Z,1520550484.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-08T23:08:04.954Z,1520550484.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:05.289Z,1520550485.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:05.309Z,1520550485.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-08T23:08:05.310Z,1520550485.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:05.691Z,1520550485.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:05.710Z,1520550485.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-08T23:08:05.711Z,1520550485.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:06.093Z,1520550486.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:06.107Z,1520550486.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-08T23:08:06.109Z,1520550486.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:06.492Z,1520550486.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:06.507Z,1520550486.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-08T23:08:06.508Z,1520550486.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:06.892Z,1520550486.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:06.914Z,1520550486.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-08T23:08:06.915Z,1520550486.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:07.276Z,1520550487.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:07.303Z,1520550487.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-08T23:08:07.304Z,1520550487.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:07.683Z,1520550487.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:07.709Z,1520550487.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-08T23:08:07.710Z,1520550487.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:08.082Z,1520550488.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:08.109Z,1520550488.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-08T23:08:08.110Z,1520550488.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:08.493Z,1520550488.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:08.595Z,1520550488.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-03-08T23:08:08.596Z,1520550488.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:08.882Z,1520550488.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:08.908Z,1520550488.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-08T23:08:08.910Z,1520550488.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:09.278Z,1520550489.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:09.314Z,1520550489.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-08T23:08:09.315Z,1520550489.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:09.682Z,1520550489.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:09.709Z,1520550489.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-08T23:08:09.709Z,1520550489.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:10.082Z,1520550490.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:10.116Z,1520550490.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-08T23:08:10.117Z,1520550490.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:10.482Z,1520550490.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:10.563Z,1520550490.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-08T23:08:10.564Z,1520550490.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:10.893Z,1520550490.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:10.908Z,1520550490.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-08T23:08:10.910Z,1520550490.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:11.293Z,1520550491.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:11.308Z,1520550491.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-08T23:08:11.309Z,1520550491.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:11.682Z,1520550491.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:11.707Z,1520550491.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-08T23:08:11.708Z,1520550491.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:12.094Z,1520550492.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:12.109Z,1520550492.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-08T23:08:12.110Z,1520550492.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:12.481Z,1520550492.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:12.514Z,1520550492.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-08T23:08:12.515Z,1520550492.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:12.893Z,1520550492.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:12.908Z,1520550492.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-08T23:08:12.909Z,1520550492.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:13.282Z,1520550493.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:13.307Z,1520550493.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-08T23:08:13.309Z,1520550493.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:13.682Z,1520550493.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:13.714Z,1520550493.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-08T23:08:13.715Z,1520550493.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:14.094Z,1520550494.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:14.109Z,1520550494.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-08T23:08:14.110Z,1520550494.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:14.493Z,1520550494.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:14.508Z,1520550494.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-08T23:08:14.509Z,1520550494.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:14.882Z,1520550494.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:14.907Z,1520550494.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-08T23:08:14.908Z,1520550494.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:15.293Z,1520550495.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:15.308Z,1520550495.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-03-08T23:08:15.309Z,1520550495.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:15.676Z,1520550495.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:15.703Z,1520550495.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-03-08T23:08:15.704Z,1520550495.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:16.086Z,1520550496.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:16.111Z,1520550496.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-03-08T23:08:16.112Z,1520550496.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:16.486Z,1520550496.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:16.511Z,1520550496.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-03-08T23:08:16.512Z,1520550496.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:16.886Z,1520550496.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:16.912Z,1520550496.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-03-08T23:08:16.913Z,1520550496.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:17.297Z,1520550497.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:17.311Z,1520550497.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-03-08T23:08:17.312Z,1520550497.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:17.686Z,1520550497.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:17.711Z,1520550497.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-08T23:08:17.712Z,1520550497.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:18.086Z,1520550498.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:18.111Z,1520550498.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-03-08T23:08:18.112Z,1520550498.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:18.482Z,1520550498.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:18.514Z,1520550498.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-03-08T23:08:18.515Z,1520550498.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:18.887Z,1520550498.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:18.913Z,1520550498.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-03-08T23:08:18.914Z,1520550498.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:19.279Z,1520550499.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:19.314Z,1520550499.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-03-08T23:08:19.314Z,1520550499.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:19.686Z,1520550499.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:19.710Z,1520550499.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-03-08T23:08:19.711Z,1520550499.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:20.086Z,1520550500.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:20.111Z,1520550500.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-03-08T23:08:20.112Z,1520550500.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:20.486Z,1520550500.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:20.511Z,1520550500.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-03-08T23:08:20.512Z,1520550500.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:20.882Z,1520550500.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:20.907Z,1520550500.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:21.282Z,1520550501.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:21.316Z,1520550501.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:21.680Z,1520550501.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:21.714Z,1520550501.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:22.086Z,1520550502.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:22.111Z,1520550502.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:22.486Z,1520550502.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:22.512Z,1520550502.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:22.886Z,1520550502.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:22.912Z,1520550502.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:23.282Z,1520550503.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:23.307Z,1520550503.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:23.686Z,1520550503.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:23.718Z,1520550503.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:24.086Z,1520550504.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:24.112Z,1520550504.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:24.482Z,1520550504.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:24.514Z,1520550504.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:24.886Z,1520550504.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:24.918Z,1520550504.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:25.279Z,1520550505.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:25.307Z,1520550505.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:25.686Z,1520550505.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:25.711Z,1520550505.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:26.086Z,1520550506.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:26.113Z,1520550506.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:26.486Z,1520550506.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:26.512Z,1520550506.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:26.890Z,1520550506.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:26.915Z,1520550506.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:27.286Z,1520550507.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:27.313Z,1520550507.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:27.675Z,1520550507.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:27.691Z,1520550507.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:28.082Z,1520550508.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:28.120Z,1520550508.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:28.487Z,1520550508.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:28.522Z,1520550508.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:28.882Z,1520550508.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:28.898Z,1520550508.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:29.290Z,1520550509.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:29.326Z,1520550509.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:29.686Z,1520550509.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:29.722Z,1520550509.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:30.090Z,1520550510.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:30.105Z,1520550510.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:30.494Z,1520550510.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:30.509Z,1520550510.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:30.890Z,1520550510.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:30.910Z,1520550510.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:31.290Z,1520550511.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:31.305Z,1520550511.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:31.688Z,1520550511.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:31.703Z,1520550511.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:32.091Z,1520550512.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:32.130Z,1520550512.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:32.487Z,1520550512.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:32.502Z,1520550512.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:32.888Z,1520550512.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:32.903Z,1520550512.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:33.288Z,1520550513.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:33.312Z,1520550513.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:33.691Z,1520550513.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:33.706Z,1520550513.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:34.091Z,1520550514.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:34.106Z,1520550514.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:34.490Z,1520550514.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:34.510Z,1520550514.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:34.891Z,1520550514.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:34.906Z,1520550514.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:35.289Z,1520550515.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:35.304Z,1520550515.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:35.691Z,1520550515.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:35.707Z,1520550515.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:36.091Z,1520550516.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:36.106Z,1520550516.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:36.488Z,1520550516.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:36.503Z,1520550516.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:36.888Z,1520550516.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:36.911Z,1520550516.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:37.293Z,1520550517.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:37.308Z,1520550517.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:37.691Z,1520550517.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:37.706Z,1520550517.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:38.089Z,1520550518.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:38.117Z,1520550518.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:38.494Z,1520550518.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:38.509Z,1520550518.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:38.891Z,1520550518.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:38.906Z,1520550518.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:39.294Z,1520550519.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:39.314Z,1520550519.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:39.694Z,1520550519.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:39.709Z,1520550519.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:40.091Z,1520550520.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:40.106Z,1520550520.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:40.487Z,1520550520.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:40.506Z,1520550520.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:40.892Z,1520550520.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:40.907Z,1520550520.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:41.291Z,1520550521.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:41.306Z,1520550521.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:41.687Z,1520550521.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:41.714Z,1520550521.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:42.090Z,1520550522.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:42.106Z,1520550522.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:42.496Z,1520550522.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:42.511Z,1520550522.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:42.879Z,1520550522.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:42.909Z,1520550522.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:43.290Z,1520550523.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:43.309Z,1520550523.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:43.690Z,1520550523.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:43.706Z,1520550523.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:44.094Z,1520550524.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:44.110Z,1520550524.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:44.494Z,1520550524.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:44.510Z,1520550524.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:44.894Z,1520550524.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:44.910Z,1520550524.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:45.280Z,1520550525.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:45.312Z,1520550525.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:45.686Z,1520550525.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:45.714Z,1520550525.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:46.082Z,1520550526.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:46.115Z,1520550526.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:46.486Z,1520550526.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:46.513Z,1520550526.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:46.885Z,1520550526.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:46.930Z,1520550526.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:47.284Z,1520550527.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:47.313Z,1520550527.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:47.682Z,1520550527.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:47.715Z,1520550527.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:48.082Z,1520550528.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:48.113Z,1520550528.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:48.486Z,1520550528.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:48.519Z,1520550528.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:48.886Z,1520550528.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:48.919Z,1520550528.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:49.286Z,1520550529.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:49.322Z,1520550529.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:49.690Z,1520550529.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:49.720Z,1520550529.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:50.078Z,1520550530.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:50.093Z,1520550530.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:50.490Z,1520550530.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:50.520Z,1520550530.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:50.890Z,1520550530.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:50.920Z,1520550530.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:51.282Z,1520550531.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:51.297Z,1520550531.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:51.687Z,1520550531.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:51.710Z,1520550531.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:52.086Z,1520550532.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:52.101Z,1520550532.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:52.482Z,1520550532.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:52.518Z,1520550532.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:52.886Z,1520550532.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:52.912Z,1520550532.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:53.282Z,1520550533.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:53.313Z,1520550533.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:53.679Z,1520550533.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:53.706Z,1520550533.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:54.082Z,1520550534.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:54.113Z,1520550534.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:54.482Z,1520550534.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:54.497Z,1520550534.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:54.887Z,1520550534.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:54.902Z,1520550534.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:55.283Z,1520550535.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:55.299Z,1520550535.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:55.686Z,1520550535.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:55.701Z,1520550535.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:56.083Z,1520550536.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:56.098Z,1520550536.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:56.482Z,1520550536.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:56.498Z,1520550536.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:56.890Z,1520550536.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:56.904Z,1520550536.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:57.278Z,1520550537.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:57.294Z,1520550537.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:57.690Z,1520550537.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:57.705Z,1520550537.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:58.087Z,1520550538.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:58.101Z,1520550538.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:58.490Z,1520550538.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:58.505Z,1520550538.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:58.890Z,1520550538.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:58.905Z,1520550538.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:59.286Z,1520550539.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:59.302Z,1520550539.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:08:59.682Z,1520550539.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:08:59.697Z,1520550539.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:00.090Z,1520550540.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:00.110Z,1520550540.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:00.488Z,1520550540.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:00.503Z,1520550540.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:00.891Z,1520550540.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:00.906Z,1520550540.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:00.909Z,1520550540.909 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T23:09:00.909Z,1520550540.909 [Default:CheckIn:C.Wait] Stopped
2018-03-08T23:09:00.909Z,1520550540.909 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T23:09:00.909Z,1520550540.909 [Default:CheckIn:D] Running Loop=1
2018-03-08T23:09:01.291Z,1520550541.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:01.306Z,1520550541.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:01.309Z,1520550541.309 [Default:CheckIn:D] Stopped
2018-03-08T23:09:01.309Z,1520550541.309 [Default:CheckIn:E] Running Loop=1
2018-03-08T23:09:01.689Z,1520550541.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:01.703Z,1520550541.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:01.707Z,1520550541.707 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 923.275065 min 
2018-03-08T23:09:01.707Z,1520550541.707 [Default:CheckIn:E] Stopped
2018-03-08T23:09:01.707Z,1520550541.707 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T23:09:01.707Z,1520550541.707 [Default:CheckIn] Stopped
2018-03-08T23:09:01.707Z,1520550541.707 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T23:09:01.707Z,1520550541.707 [Default:CheckIn](INFO): Running loop #90
2018-03-08T23:09:01.707Z,1520550541.707 [Default:CheckIn] Running Loop=90
2018-03-08T23:09:01.707Z,1520550541.707 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T23:09:01.708Z,1520550541.708 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T23:09:02.091Z,1520550542.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:02.106Z,1520550542.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:05.205Z,1520550545.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:05.220Z,1520550545.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:05.258Z,1520550545.258 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-08T23:09:05.258Z,1520550545.258 [NAL9602] No Fault, FailCount= 5
2018-03-08T23:09:05.304Z,1520550545.304 [NAL9602](INFO): Powering up NAL9602
2018-03-08T23:09:05.322Z,1520550545.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:05.370Z,1520550545.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:05.703Z,1520550545.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:05.718Z,1520550545.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:06.102Z,1520550546.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:06.119Z,1520550546.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:06.498Z,1520550546.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:06.514Z,1520550546.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:06.901Z,1520550546.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:06.916Z,1520550546.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:07.302Z,1520550547.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:07.322Z,1520550547.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:07.696Z,1520550547.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:07.711Z,1520550547.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:08.102Z,1520550548.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:08.117Z,1520550548.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:08.502Z,1520550548.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:08.522Z,1520550548.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:08.903Z,1520550548.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:08.919Z,1520550548.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:09.298Z,1520550549.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:09.313Z,1520550549.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:09.703Z,1520550549.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:09.718Z,1520550549.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:10.098Z,1520550550.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:10.113Z,1520550550.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:10.496Z,1520550550.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:10.519Z,1520550550.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:10.899Z,1520550550.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:10.922Z,1520550550.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:11.296Z,1520550551.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:11.311Z,1520550551.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:11.698Z,1520550551.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:11.713Z,1520550551.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:12.102Z,1520550552.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:12.118Z,1520550552.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:12.498Z,1520550552.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:12.514Z,1520550552.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:12.902Z,1520550552.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:12.917Z,1520550552.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:13.301Z,1520550553.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:13.317Z,1520550553.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:13.702Z,1520550553.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:13.718Z,1520550553.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:14.098Z,1520550554.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:14.113Z,1520550554.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:14.503Z,1520550554.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:14.518Z,1520550554.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:14.902Z,1520550554.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:14.917Z,1520550554.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:15.303Z,1520550555.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:15.317Z,1520550555.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:15.703Z,1520550555.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:15.719Z,1520550555.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:16.105Z,1520550556.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:16.121Z,1520550556.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:16.478Z,1520550556.478 [NAL9602](INFO): NAL9602 initialized
2018-03-08T23:09:16.505Z,1520550556.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:16.526Z,1520550556.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:16.903Z,1520550556.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:16.918Z,1520550556.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:17.305Z,1520550557.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:17.320Z,1520550557.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:17.705Z,1520550557.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:17.726Z,1520550557.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:18.109Z,1520550558.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:18.125Z,1520550558.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:18.503Z,1520550558.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:18.519Z,1520550558.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:18.900Z,1520550558.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:18.915Z,1520550558.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:19.304Z,1520550559.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:19.320Z,1520550559.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:19.700Z,1520550559.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:19.715Z,1520550559.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:20.106Z,1520550560.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:20.121Z,1520550560.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:20.506Z,1520550560.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:20.526Z,1520550560.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:20.906Z,1520550560.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:20.921Z,1520550560.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:21.299Z,1520550561.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:21.322Z,1520550561.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:21.703Z,1520550561.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:21.719Z,1520550561.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:22.091Z,1520550562.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:22.123Z,1520550562.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:22.492Z,1520550562.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:22.533Z,1520550562.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:22.891Z,1520550562.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:22.926Z,1520550562.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:23.305Z,1520550563.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:23.321Z,1520550563.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:23.709Z,1520550563.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:23.725Z,1520550563.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:24.109Z,1520550564.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:24.124Z,1520550564.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:24.501Z,1520550564.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:24.516Z,1520550564.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:24.903Z,1520550564.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:24.919Z,1520550564.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:25.305Z,1520550565.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:25.364Z,1520550565.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:25.703Z,1520550565.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:25.719Z,1520550565.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:26.099Z,1520550566.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:26.115Z,1520550566.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:26.505Z,1520550566.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:26.519Z,1520550566.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:26.910Z,1520550566.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:26.925Z,1520550566.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:27.340Z,1520550567.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:27.372Z,1520550567.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:27.702Z,1520550567.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:27.718Z,1520550567.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:28.102Z,1520550568.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:28.123Z,1520550568.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:28.504Z,1520550568.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:28.519Z,1520550568.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:28.899Z,1520550568.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:28.914Z,1520550568.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:29.305Z,1520550569.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:29.321Z,1520550569.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:29.705Z,1520550569.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:29.720Z,1520550569.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:30.106Z,1520550570.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:30.121Z,1520550570.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:30.502Z,1520550570.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:30.517Z,1520550570.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:30.899Z,1520550570.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:30.914Z,1520550570.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:31.300Z,1520550571.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:31.315Z,1520550571.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:31.703Z,1520550571.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:31.726Z,1520550571.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:32.102Z,1520550572.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:32.118Z,1520550572.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:32.505Z,1520550572.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:32.520Z,1520550572.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:32.909Z,1520550572.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:32.924Z,1520550572.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:33.305Z,1520550573.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:33.320Z,1520550573.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:33.702Z,1520550573.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:33.717Z,1520550573.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:34.102Z,1520550574.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:34.117Z,1520550574.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:34.501Z,1520550574.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:34.516Z,1520550574.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:34.900Z,1520550574.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:34.922Z,1520550574.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:35.305Z,1520550575.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:35.321Z,1520550575.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:35.705Z,1520550575.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:35.726Z,1520550575.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:36.105Z,1520550576.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:36.120Z,1520550576.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:36.502Z,1520550576.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:36.517Z,1520550576.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:36.904Z,1520550576.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:36.920Z,1520550576.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:37.302Z,1520550577.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:37.317Z,1520550577.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:37.705Z,1520550577.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:37.721Z,1520550577.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:38.105Z,1520550578.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:38.120Z,1520550578.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:38.505Z,1520550578.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:38.520Z,1520550578.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:38.902Z,1520550578.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:38.917Z,1520550578.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:39.299Z,1520550579.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:39.314Z,1520550579.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:39.701Z,1520550579.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:39.716Z,1520550579.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:40.104Z,1520550580.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:40.119Z,1520550580.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:40.500Z,1520550580.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:40.515Z,1520550580.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:40.905Z,1520550580.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:40.920Z,1520550580.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:41.309Z,1520550581.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:41.324Z,1520550581.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:41.706Z,1520550581.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:41.721Z,1520550581.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:42.099Z,1520550582.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:42.114Z,1520550582.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:42.515Z,1520550582.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:42.552Z,1520550582.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:42.903Z,1520550582.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:42.926Z,1520550582.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:43.292Z,1520550583.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:43.331Z,1520550583.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:43.719Z,1520550583.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:43.739Z,1520550583.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:44.123Z,1520550584.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:44.139Z,1520550584.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:44.515Z,1520550584.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:44.530Z,1520550584.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:44.899Z,1520550584.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:44.928Z,1520550584.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:45.317Z,1520550585.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:45.332Z,1520550585.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:45.698Z,1520550585.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:45.736Z,1520550585.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:46.094Z,1520550586.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:46.135Z,1520550586.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:46.499Z,1520550586.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:46.518Z,1520550586.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:46.905Z,1520550586.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:46.920Z,1520550586.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:47.313Z,1520550587.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:47.346Z,1520550587.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:47.704Z,1520550587.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:47.726Z,1520550587.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:48.103Z,1520550588.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:48.118Z,1520550588.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:48.503Z,1520550588.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:48.518Z,1520550588.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:48.901Z,1520550588.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:48.916Z,1520550588.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:49.295Z,1520550589.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:49.311Z,1520550589.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:49.705Z,1520550589.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:49.721Z,1520550589.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:50.109Z,1520550590.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:50.124Z,1520550590.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:50.505Z,1520550590.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:50.520Z,1520550590.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:50.900Z,1520550590.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:50.916Z,1520550590.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:51.308Z,1520550591.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:51.323Z,1520550591.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:51.704Z,1520550591.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:51.719Z,1520550591.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:52.105Z,1520550592.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:52.120Z,1520550592.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:52.498Z,1520550592.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:52.517Z,1520550592.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:52.909Z,1520550592.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:52.924Z,1520550592.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:53.309Z,1520550593.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:53.325Z,1520550593.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:53.708Z,1520550593.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:53.723Z,1520550593.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:54.105Z,1520550594.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:54.120Z,1520550594.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:54.503Z,1520550594.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:54.522Z,1520550594.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:54.906Z,1520550594.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:54.926Z,1520550594.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:55.305Z,1520550595.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:55.320Z,1520550595.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:55.708Z,1520550595.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:55.730Z,1520550595.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:56.108Z,1520550596.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:56.124Z,1520550596.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:56.510Z,1520550596.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:56.525Z,1520550596.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:56.899Z,1520550596.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:56.919Z,1520550596.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:57.303Z,1520550597.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:57.322Z,1520550597.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:57.705Z,1520550597.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:57.720Z,1520550597.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:58.106Z,1520550598.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:58.121Z,1520550598.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:58.498Z,1520550598.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:58.518Z,1520550598.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:58.911Z,1520550598.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:58.926Z,1520550598.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:59.309Z,1520550599.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:59.325Z,1520550599.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:09:59.708Z,1520550599.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:09:59.727Z,1520550599.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:10:00.106Z,1520550600.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:00.121Z,1520550600.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:10:00.504Z,1520550600.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:00.519Z,1520550600.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:10:00.899Z,1520550600.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:00.963Z,1520550600.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:10:01.292Z,1520550601.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:01.333Z,1520550601.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:10:01.697Z,1520550601.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:01.725Z,1520550601.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:10:02.129Z,1520550602.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:02.150Z,1520550602.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:10:05.772Z,1520550605.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:05.787Z,1520550605.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:10:05.881Z,1520550605.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:05.924Z,1520550605.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:10:06.242Z,1520550606.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:06.262Z,1520550606.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:10:06.655Z,1520550606.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:06.695Z,1520550606.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:10:07.045Z,1520550607.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:07.097Z,1520550607.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:10:07.445Z,1520550607.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:07.477Z,1520550607.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:10:07.870Z,1520550607.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:07.895Z,1520550607.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:10:08.239Z,1520550608.239 [NAL9602](INFO): GPS fix at 20180308T230927: (21.316457, -157.875875)
2018-03-08T23:10:08.256Z,1520550608.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:08.311Z,1520550608.311 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T23:10:08.311Z,1520550608.311 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T23:10:08.653Z,1520550608.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:09.179Z,1520550609.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:09.479Z,1520550609.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:15.390Z,1520550615.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:15.567Z,1520550615.567 [DataOverHttps](INFO): Sending 252 bytes from file Logs/20180308T074127/Courier0360.lzma
2018-03-08T23:10:15.639Z,1520550615.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:16.004Z,1520550616.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:16.372Z,1520550616.372 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0360.lzma.bak
2018-03-08T23:10:16.372Z,1520550616.372 [DataOverHttps](INFO): SBD MOMSN=7989925
2018-03-08T23:10:16.397Z,1520550616.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:17.479Z,1520550617.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:17.696Z,1520550617.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:23.578Z,1520550623.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:23.723Z,1520550623.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:24.091Z,1520550624.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:24.459Z,1520550624.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:24.859Z,1520550624.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:25.259Z,1520550625.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:25.658Z,1520550625.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:29.457Z,1520550629.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:29.578Z,1520550629.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:29.929Z,1520550629.929 [DataOverHttps](INFO): Sending 273 bytes from file Logs/20180308T074127/Express0361.lzma
2018-03-08T23:10:29.962Z,1520550629.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:30.357Z,1520550630.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:30.730Z,1520550630.730 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0361.lzma.bak
2018-03-08T23:10:30.730Z,1520550630.730 [DataOverHttps](INFO): SBD MOMSN=7989929
2018-03-08T23:10:30.772Z,1520550630.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:31.375Z,1520550631.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:31.426Z,1520550631.426 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T23:10:31.426Z,1520550631.426 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T23:10:31.426Z,1520550631.426 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T23:10:31.557Z,1520550631.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:31.962Z,1520550631.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:36.756Z,1520550636.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:36.937Z,1520550636.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:37.326Z,1520550637.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:37.705Z,1520550637.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:38.104Z,1520550638.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:38.540Z,1520550638.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:38.909Z,1520550638.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:39.308Z,1520550639.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:39.702Z,1520550639.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:40.108Z,1520550640.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:40.497Z,1520550640.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:40.892Z,1520550640.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:41.295Z,1520550641.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:41.689Z,1520550641.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:42.185Z,1520550642.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:42.487Z,1520550642.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:42.932Z,1520550642.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:43.348Z,1520550643.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:43.707Z,1520550643.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:44.125Z,1520550644.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:44.525Z,1520550644.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:44.894Z,1520550644.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:45.300Z,1520550645.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:45.700Z,1520550645.700 [NAL9602](INFO): Powering down
2018-03-08T23:10:45.730Z,1520550645.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:46.101Z,1520550646.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:46.500Z,1520550646.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:46.897Z,1520550646.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:47.304Z,1520550647.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:47.688Z,1520550647.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:48.090Z,1520550648.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:48.491Z,1520550648.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:48.888Z,1520550648.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:49.321Z,1520550649.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:49.689Z,1520550649.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:50.133Z,1520550650.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:10:50.509Z,1520550650.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:11:01.735Z,1520550661.735 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:11:01.735Z,1520550661.735 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-08T23:11:01.735Z,1520550661.735 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T23:11:01.759Z,1520550661.759 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T23:11:02.189Z,1520550662.189 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T23:11:02.189Z,1520550662.189 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-08T23:11:02.550Z,1520550662.550 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T23:11:02.550Z,1520550662.550 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T23:11:02.551Z,1520550662.551 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T23:12:04.406Z,1520550724.406 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T23:13:24.582Z,1520550804.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:24.982Z,1520550804.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:25.390Z,1520550805.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:25.783Z,1520550805.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:26.183Z,1520550806.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:26.589Z,1520550806.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:26.987Z,1520550806.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:27.386Z,1520550807.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:27.789Z,1520550807.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:28.194Z,1520550808.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:28.590Z,1520550808.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:28.989Z,1520550808.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:29.395Z,1520550809.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:29.790Z,1520550809.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:30.199Z,1520550810.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:30.589Z,1520550810.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:30.991Z,1520550810.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:31.399Z,1520550811.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:31.789Z,1520550811.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:32.187Z,1520550812.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:32.590Z,1520550812.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:35.828Z,1520550815.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:35.960Z,1520550815.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:36.312Z,1520550816.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:36.703Z,1520550816.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:37.106Z,1520550817.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:37.514Z,1520550817.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:37.907Z,1520550817.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:38.303Z,1520550818.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:38.715Z,1520550818.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:39.098Z,1520550819.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:39.498Z,1520550819.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:39.898Z,1520550819.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:40.299Z,1520550820.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:40.698Z,1520550820.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:41.098Z,1520550821.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:41.498Z,1520550821.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:41.898Z,1520550821.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:42.309Z,1520550822.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:42.710Z,1520550822.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:43.109Z,1520550823.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:43.507Z,1520550823.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:43.894Z,1520550823.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:44.294Z,1520550824.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:44.698Z,1520550824.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:45.098Z,1520550825.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:45.500Z,1520550825.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:45.968Z,1520550825.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:46.324Z,1520550826.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:46.703Z,1520550826.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:47.113Z,1520550827.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:47.536Z,1520550827.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:47.935Z,1520550827.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:48.337Z,1520550828.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:48.699Z,1520550828.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:49.099Z,1520550829.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:49.514Z,1520550829.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:49.906Z,1520550829.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:50.307Z,1520550830.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:50.707Z,1520550830.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:51.107Z,1520550831.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:51.506Z,1520550831.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:51.906Z,1520550831.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:52.294Z,1520550832.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:52.711Z,1520550832.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:53.098Z,1520550833.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:53.498Z,1520550833.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:53.910Z,1520550833.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:54.310Z,1520550834.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:54.694Z,1520550834.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:55.098Z,1520550835.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:55.499Z,1520550835.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:55.906Z,1520550835.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:56.299Z,1520550836.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:56.707Z,1520550836.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:57.105Z,1520550837.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:57.508Z,1520550837.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:57.905Z,1520550837.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:58.307Z,1520550838.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:58.698Z,1520550838.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:59.098Z,1520550839.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:59.493Z,1520550839.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:13:59.902Z,1520550839.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:00.302Z,1520550840.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:00.698Z,1520550840.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:01.102Z,1520550841.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:01.507Z,1520550841.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:01.907Z,1520550841.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:02.308Z,1520550842.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:02.707Z,1520550842.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:02.730Z,1520550842.730 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:14:02.730Z,1520550842.730 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-08T23:14:02.730Z,1520550842.730 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T23:14:02.742Z,1520550842.742 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T23:14:03.098Z,1520550843.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:03.182Z,1520550843.182 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T23:14:03.182Z,1520550843.182 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-08T23:14:03.499Z,1520550843.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:03.539Z,1520550843.539 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T23:14:03.539Z,1520550843.539 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T23:14:03.539Z,1520550843.539 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T23:14:03.919Z,1520550843.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:04.298Z,1520550844.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:04.698Z,1520550844.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:05.098Z,1520550845.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:05.491Z,1520550845.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:05.905Z,1520550845.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:06.306Z,1520550846.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:06.698Z,1520550846.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:07.103Z,1520550847.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:07.503Z,1520550847.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:07.903Z,1520550847.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:08.303Z,1520550848.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:08.704Z,1520550848.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:09.106Z,1520550849.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:09.515Z,1520550849.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:09.910Z,1520550849.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:10.306Z,1520550850.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:10.698Z,1520550850.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:11.098Z,1520550851.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:11.494Z,1520550851.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:11.899Z,1520550851.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:12.306Z,1520550852.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:12.693Z,1520550852.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:13.103Z,1520550853.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:13.505Z,1520550853.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:13.903Z,1520550853.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:14.306Z,1520550854.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:14.701Z,1520550854.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:15.110Z,1520550855.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:15.498Z,1520550855.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:15.909Z,1520550855.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:16.298Z,1520550856.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:16.715Z,1520550856.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:17.098Z,1520550857.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:17.498Z,1520550857.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:17.898Z,1520550857.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:18.298Z,1520550858.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:18.699Z,1520550858.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:19.100Z,1520550859.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:19.498Z,1520550859.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:19.898Z,1520550859.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:20.299Z,1520550860.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:20.699Z,1520550860.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:21.103Z,1520550861.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:21.492Z,1520550861.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:21.907Z,1520550861.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:22.306Z,1520550862.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:22.702Z,1520550862.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:23.107Z,1520550863.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:23.510Z,1520550863.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:23.906Z,1520550863.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:24.318Z,1520550864.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:24.706Z,1520550864.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:25.112Z,1520550865.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:25.500Z,1520550865.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:25.902Z,1520550865.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:26.298Z,1520550866.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:26.698Z,1520550866.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:27.098Z,1520550867.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:27.498Z,1520550867.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:27.903Z,1520550867.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:28.303Z,1520550868.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:28.697Z,1520550868.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:29.100Z,1520550869.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:29.499Z,1520550869.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:29.898Z,1520550869.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:30.304Z,1520550870.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:30.698Z,1520550870.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:31.098Z,1520550871.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:31.498Z,1520550871.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:31.902Z,1520550871.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:32.305Z,1520550872.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:32.706Z,1520550872.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:35.940Z,1520550875.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:36.061Z,1520550876.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:36.455Z,1520550876.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:36.849Z,1520550876.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:37.254Z,1520550877.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:37.643Z,1520550877.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:46.442Z,1520550886.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:46.838Z,1520550886.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:47.243Z,1520550887.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:47.646Z,1520550887.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:48.042Z,1520550888.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:48.442Z,1520550888.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:48.847Z,1520550888.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:49.246Z,1520550889.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:49.650Z,1520550889.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:50.053Z,1520550890.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:50.446Z,1520550890.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:50.859Z,1520550890.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:51.248Z,1520550891.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:51.646Z,1520550891.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:52.062Z,1520550892.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:52.438Z,1520550892.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:52.839Z,1520550892.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:53.246Z,1520550893.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:53.646Z,1520550893.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:54.038Z,1520550894.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:54.442Z,1520550894.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:54.846Z,1520550894.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:55.240Z,1520550895.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:55.643Z,1520550895.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:56.047Z,1520550896.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:56.446Z,1520550896.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:56.851Z,1520550896.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:57.250Z,1520550897.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:57.648Z,1520550897.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:58.049Z,1520550898.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:58.445Z,1520550898.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:58.844Z,1520550898.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:59.259Z,1520550899.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:14:59.651Z,1520550899.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:00.042Z,1520550900.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:00.444Z,1520550900.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:00.850Z,1520550900.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:01.247Z,1520550901.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:01.648Z,1520550901.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:02.054Z,1520550902.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:02.446Z,1520550902.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:02.845Z,1520550902.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:03.238Z,1520550903.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:03.639Z,1520550903.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:04.045Z,1520550904.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:04.454Z,1520550904.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:04.839Z,1520550904.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:05.245Z,1520550905.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:05.638Z,1520550905.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:06.046Z,1520550906.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:06.443Z,1520550906.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:06.842Z,1520550906.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:07.236Z,1520550907.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:07.646Z,1520550907.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:08.050Z,1520550908.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:08.443Z,1520550908.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:08.853Z,1520550908.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:09.250Z,1520550909.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:09.646Z,1520550909.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:10.049Z,1520550910.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:10.450Z,1520550910.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:10.849Z,1520550910.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:11.247Z,1520550911.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:11.651Z,1520550911.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:12.052Z,1520550912.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:12.451Z,1520550912.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:12.851Z,1520550912.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:13.246Z,1520550913.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:13.650Z,1520550913.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:14.042Z,1520550914.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:14.438Z,1520550914.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:14.842Z,1520550914.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:15.246Z,1520550915.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:15.639Z,1520550915.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:16.047Z,1520550916.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:16.450Z,1520550916.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:16.843Z,1520550916.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:17.250Z,1520550917.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:17.647Z,1520550917.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:18.054Z,1520550918.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:18.450Z,1520550918.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:18.854Z,1520550918.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:19.239Z,1520550919.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:19.650Z,1520550919.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:20.050Z,1520550920.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:20.439Z,1520550920.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:20.850Z,1520550920.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:21.242Z,1520550921.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:21.639Z,1520550921.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:22.042Z,1520550922.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:22.442Z,1520550922.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:22.838Z,1520550922.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:23.246Z,1520550923.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:23.646Z,1520550923.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:24.046Z,1520550924.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:24.442Z,1520550924.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:24.846Z,1520550924.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:25.238Z,1520550925.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:25.643Z,1520550925.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:26.045Z,1520550926.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:26.439Z,1520550926.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:26.842Z,1520550926.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:27.250Z,1520550927.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:27.656Z,1520550927.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:28.051Z,1520550928.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:28.448Z,1520550928.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:28.847Z,1520550928.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:29.250Z,1520550929.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:29.654Z,1520550929.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:30.039Z,1520550930.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:30.451Z,1520550930.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:30.842Z,1520550930.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:31.239Z,1520550931.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:31.642Z,1520550931.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:31.696Z,1520550931.696 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T23:15:31.720Z,1520550931.720 [Default:CheckIn:C.Wait] Stopped
2018-03-08T23:15:31.721Z,1520550931.721 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T23:15:31.721Z,1520550931.721 [Default:CheckIn:D] Running Loop=1
2018-03-08T23:15:32.046Z,1520550932.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:32.089Z,1520550932.089 [Default:CheckIn:D] Stopped
2018-03-08T23:15:32.089Z,1520550932.089 [Default:CheckIn:E] Running Loop=1
2018-03-08T23:15:32.447Z,1520550932.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:32.489Z,1520550932.489 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 929.788086 min 
2018-03-08T23:15:32.490Z,1520550932.490 [Default:CheckIn:E] Stopped
2018-03-08T23:15:32.490Z,1520550932.490 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T23:15:32.490Z,1520550932.490 [Default:CheckIn] Stopped
2018-03-08T23:15:32.490Z,1520550932.490 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T23:15:32.490Z,1520550932.490 [Default:CheckIn](INFO): Running loop #91
2018-03-08T23:15:32.490Z,1520550932.490 [Default:CheckIn] Running Loop=91
2018-03-08T23:15:32.490Z,1520550932.490 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T23:15:32.490Z,1520550932.490 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T23:15:32.842Z,1520550932.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:36.049Z,1520550936.049 [NAL9602](INFO): Powering up
2018-03-08T23:15:36.124Z,1520550936.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:36.264Z,1520550936.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:36.635Z,1520550936.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:37.035Z,1520550937.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:37.435Z,1520550937.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:37.834Z,1520550937.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:38.237Z,1520550938.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:38.631Z,1520550938.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:39.035Z,1520550939.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:39.434Z,1520550939.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:39.834Z,1520550939.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:40.234Z,1520550940.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:40.634Z,1520550940.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:41.035Z,1520550941.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:41.436Z,1520550941.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:41.834Z,1520550941.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:42.235Z,1520550942.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:42.640Z,1520550942.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:43.036Z,1520550943.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:43.428Z,1520550943.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:43.847Z,1520550943.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:44.226Z,1520550944.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:44.626Z,1520550944.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:45.038Z,1520550945.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:45.428Z,1520550945.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:45.828Z,1520550945.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:46.226Z,1520550946.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:46.647Z,1520550946.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:47.010Z,1520550947.010 [NAL9602](INFO): NAL9602 initialized
2018-03-08T23:15:47.027Z,1520550947.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:47.427Z,1520550947.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:47.845Z,1520550947.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:48.259Z,1520550948.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:48.645Z,1520550948.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:49.031Z,1520550949.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:49.432Z,1520550949.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:49.835Z,1520550949.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:50.237Z,1520550950.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:50.642Z,1520550950.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:51.040Z,1520550951.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:51.440Z,1520550951.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:51.839Z,1520550951.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:52.234Z,1520550952.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:52.647Z,1520550952.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:53.022Z,1520550953.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:53.443Z,1520550953.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:53.835Z,1520550953.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:54.229Z,1520550954.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:54.643Z,1520550954.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:55.049Z,1520550955.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:55.437Z,1520550955.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:55.826Z,1520550955.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:56.227Z,1520550956.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:56.626Z,1520550956.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:57.027Z,1520550957.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:57.427Z,1520550957.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:57.826Z,1520550957.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:58.225Z,1520550958.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:58.648Z,1520550958.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:59.033Z,1520550959.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:59.426Z,1520550959.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:15:59.827Z,1520550959.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:00.227Z,1520550960.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:00.626Z,1520550960.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:01.031Z,1520550961.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:01.434Z,1520550961.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:01.833Z,1520550961.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:02.232Z,1520550962.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:02.634Z,1520550962.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:03.037Z,1520550963.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:03.436Z,1520550963.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:03.826Z,1520550963.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:04.239Z,1520550964.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:04.634Z,1520550964.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:05.030Z,1520550965.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:05.431Z,1520550965.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:05.837Z,1520550965.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:06.230Z,1520550966.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:06.634Z,1520550966.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:07.052Z,1520550967.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:07.433Z,1520550967.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:07.830Z,1520550967.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:08.226Z,1520550968.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:08.626Z,1520550968.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:09.026Z,1520550969.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:09.426Z,1520550969.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:09.823Z,1520550969.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:10.226Z,1520550970.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:10.626Z,1520550970.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:11.030Z,1520550971.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:11.437Z,1520550971.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:11.826Z,1520550971.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:12.232Z,1520550972.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:12.638Z,1520550972.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:13.026Z,1520550973.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:13.430Z,1520550973.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:13.826Z,1520550973.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:14.226Z,1520550974.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:14.635Z,1520550974.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:15.031Z,1520550975.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:15.438Z,1520550975.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:15.831Z,1520550975.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:16.242Z,1520550976.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:16.631Z,1520550976.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:17.034Z,1520550977.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:17.435Z,1520550977.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:17.839Z,1520550977.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:18.235Z,1520550978.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:18.643Z,1520550978.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:19.039Z,1520550979.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:19.436Z,1520550979.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:19.835Z,1520550979.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:20.232Z,1520550980.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:20.636Z,1520550980.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:21.039Z,1520550981.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:21.439Z,1520550981.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:21.840Z,1520550981.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:22.237Z,1520550982.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:22.632Z,1520550982.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:23.027Z,1520550983.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:23.427Z,1520550983.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:23.827Z,1520550983.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:24.227Z,1520550984.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:24.626Z,1520550984.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:25.034Z,1520550985.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:25.434Z,1520550985.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:25.825Z,1520550985.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:26.235Z,1520550986.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:26.641Z,1520550986.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:27.032Z,1520550987.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:27.438Z,1520550987.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:27.831Z,1520550987.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:28.232Z,1520550988.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:28.631Z,1520550988.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:29.040Z,1520550989.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:29.434Z,1520550989.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:29.811Z,1520550989.811 [NAL9602](INFO): SBD MO Status=2, MOMSN=4896, MT Status=2, MTMSN=0
2018-03-08T23:16:29.812Z,1520550989.812 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-08T23:16:29.837Z,1520550989.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:30.245Z,1520550990.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:30.637Z,1520550990.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:31.036Z,1520550991.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:31.435Z,1520550991.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:31.847Z,1520550991.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:32.236Z,1520550992.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:32.634Z,1520550992.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:33.029Z,1520550993.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:36.224Z,1520550996.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:36.371Z,1520550996.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:36.714Z,1520550996.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:37.116Z,1520550997.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:37.524Z,1520550997.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:37.929Z,1520550997.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:38.311Z,1520550998.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:38.711Z,1520550998.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:39.119Z,1520550999.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:39.511Z,1520550999.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:39.912Z,1520550999.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:40.309Z,1520551000.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:40.707Z,1520551000.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:41.109Z,1520551001.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:41.505Z,1520551001.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:41.899Z,1520551001.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:42.313Z,1520551002.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:42.702Z,1520551002.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:43.098Z,1520551003.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:43.515Z,1520551003.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:43.902Z,1520551003.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:44.302Z,1520551004.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:44.729Z,1520551004.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:45.104Z,1520551005.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:45.504Z,1520551005.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:45.912Z,1520551005.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:46.323Z,1520551006.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:46.717Z,1520551006.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:47.113Z,1520551007.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:47.524Z,1520551007.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:47.911Z,1520551007.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:48.309Z,1520551008.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:48.711Z,1520551008.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:49.113Z,1520551009.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:49.513Z,1520551009.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:49.915Z,1520551009.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:50.317Z,1520551010.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:50.702Z,1520551010.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:51.102Z,1520551011.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:51.502Z,1520551011.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:51.898Z,1520551011.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:52.323Z,1520551012.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:52.702Z,1520551012.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:53.102Z,1520551013.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:53.506Z,1520551013.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:53.923Z,1520551013.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:54.298Z,1520551014.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:54.706Z,1520551014.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:55.110Z,1520551015.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:55.503Z,1520551015.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:55.908Z,1520551015.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:56.298Z,1520551016.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:56.700Z,1520551016.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:57.123Z,1520551017.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:57.502Z,1520551017.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:57.896Z,1520551017.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:58.322Z,1520551018.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:58.723Z,1520551018.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:59.107Z,1520551019.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:59.522Z,1520551019.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:16:59.902Z,1520551019.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:00.302Z,1520551020.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:00.702Z,1520551020.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:01.106Z,1520551021.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:01.498Z,1520551021.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:01.903Z,1520551021.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:02.306Z,1520551022.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:02.700Z,1520551022.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:03.102Z,1520551023.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:03.509Z,1520551023.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:03.907Z,1520551023.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:03.954Z,1520551023.954 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:17:03.954Z,1520551023.954 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-03-08T23:17:03.954Z,1520551023.954 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T23:17:03.975Z,1520551023.975 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T23:17:04.299Z,1520551024.299 [NAL9602](INFO): SBD MO Status=2, MOMSN=4896, MT Status=2, MTMSN=0
2018-03-08T23:17:04.299Z,1520551024.299 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-08T23:17:04.344Z,1520551024.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:04.379Z,1520551024.379 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T23:17:04.379Z,1520551024.379 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-03-08T23:17:04.721Z,1520551024.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:04.773Z,1520551024.773 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T23:17:04.774Z,1520551024.774 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T23:17:04.774Z,1520551024.774 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T23:17:05.112Z,1520551025.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:05.509Z,1520551025.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:05.912Z,1520551025.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:06.299Z,1520551026.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:06.725Z,1520551026.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:07.116Z,1520551027.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:07.496Z,1520551027.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:07.906Z,1520551027.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:08.306Z,1520551028.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:08.710Z,1520551028.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:09.106Z,1520551029.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:09.506Z,1520551029.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:09.898Z,1520551029.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:10.310Z,1520551030.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:10.710Z,1520551030.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:11.111Z,1520551031.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:11.508Z,1520551031.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:11.910Z,1520551031.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:12.306Z,1520551032.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:12.709Z,1520551032.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:13.111Z,1520551033.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:13.510Z,1520551033.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:13.909Z,1520551033.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:14.309Z,1520551034.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:14.698Z,1520551034.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:15.105Z,1520551035.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:15.509Z,1520551035.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:15.898Z,1520551035.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:16.315Z,1520551036.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:16.698Z,1520551036.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:17.098Z,1520551037.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:17.505Z,1520551037.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:17.902Z,1520551037.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:18.303Z,1520551038.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:18.723Z,1520551038.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:19.102Z,1520551039.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:19.500Z,1520551039.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:19.901Z,1520551039.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:20.311Z,1520551040.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:20.704Z,1520551040.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:21.110Z,1520551041.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:21.511Z,1520551041.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:21.908Z,1520551041.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:22.310Z,1520551042.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:22.711Z,1520551042.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:23.106Z,1520551043.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:23.505Z,1520551043.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:23.916Z,1520551043.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:24.302Z,1520551044.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:24.702Z,1520551044.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:25.103Z,1520551045.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:25.503Z,1520551045.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:25.920Z,1520551045.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:26.299Z,1520551046.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:26.700Z,1520551046.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:27.102Z,1520551047.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:27.502Z,1520551047.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:27.883Z,1520551047.883 [NAL9602](INFO): SBD MO Status=2, MOMSN=4896, MT Status=2, MTMSN=0
2018-03-08T23:17:27.883Z,1520551047.883 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-08T23:17:27.900Z,1520551047.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:28.325Z,1520551048.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:28.698Z,1520551048.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:29.098Z,1520551049.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:29.506Z,1520551049.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:29.910Z,1520551049.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:30.306Z,1520551050.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:30.707Z,1520551050.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:31.107Z,1520551051.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:31.510Z,1520551051.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:31.916Z,1520551051.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:32.327Z,1520551052.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:32.725Z,1520551052.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:33.145Z,1520551053.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:36.378Z,1520551056.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:36.503Z,1520551056.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:36.856Z,1520551056.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:37.257Z,1520551057.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:37.653Z,1520551057.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:38.050Z,1520551058.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:38.443Z,1520551058.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:38.839Z,1520551058.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:39.243Z,1520551059.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:39.651Z,1520551059.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:40.045Z,1520551060.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:40.455Z,1520551060.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:40.850Z,1520551060.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:41.239Z,1520551061.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:41.652Z,1520551061.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:42.043Z,1520551062.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:42.454Z,1520551062.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:42.844Z,1520551062.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:43.244Z,1520551063.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:43.644Z,1520551063.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:44.047Z,1520551064.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:44.447Z,1520551064.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:44.846Z,1520551064.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:45.250Z,1520551065.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:45.627Z,1520551065.627 [NAL9602](INFO): SBD MO Status=0, MOMSN=4896, MT Status=0, MTMSN=0
2018-03-08T23:17:45.627Z,1520551065.627 [NAL9602](INFO): No messages in MT queue
2018-03-08T23:17:45.627Z,1520551065.627 [NAL9602](INFO): Failure count cleared after critical for NAL9602
2018-03-08T23:17:45.649Z,1520551065.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:46.064Z,1520551066.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:46.464Z,1520551066.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:46.839Z,1520551066.839 [NAL9602](INFO): GPS fix at 20180308T231705: (21.316520, -157.875888)
2018-03-08T23:17:46.857Z,1520551066.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:46.911Z,1520551066.911 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T23:17:46.911Z,1520551066.911 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T23:17:47.259Z,1520551067.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:47.811Z,1520551067.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:48.046Z,1520551068.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:51.426Z,1520551071.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:51.544Z,1520551071.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:51.893Z,1520551071.893 [DataOverHttps](INFO): Sending 63 bytes from file Logs/20180308T074127/Courier0364.lzma
2018-03-08T23:17:51.925Z,1520551071.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:52.322Z,1520551072.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:52.692Z,1520551072.692 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0364.lzma.bak
2018-03-08T23:17:52.692Z,1520551072.692 [DataOverHttps](INFO): SBD MOMSN=7989990
2018-03-08T23:17:52.734Z,1520551072.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:53.320Z,1520551073.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:53.504Z,1520551073.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:53.909Z,1520551073.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:57.332Z,1520551077.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:57.441Z,1520551077.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:57.798Z,1520551077.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:58.200Z,1520551078.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:58.598Z,1520551078.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:59.006Z,1520551079.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:17:59.398Z,1520551079.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:02.701Z,1520551082.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:02.818Z,1520551082.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:03.185Z,1520551083.185 [DataOverHttps](INFO): Sending 122 bytes from file Logs/20180308T074127/Express0365.lzma
2018-03-08T23:18:03.219Z,1520551083.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:03.614Z,1520551083.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:03.984Z,1520551083.984 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0365.lzma.bak
2018-03-08T23:18:03.984Z,1520551083.984 [DataOverHttps](INFO): SBD MOMSN=7990001
2018-03-08T23:18:04.038Z,1520551084.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:04.612Z,1520551084.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:04.639Z,1520551084.639 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T23:18:04.639Z,1520551084.639 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T23:18:04.640Z,1520551084.640 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T23:18:04.805Z,1520551084.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:05.202Z,1520551085.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:08.434Z,1520551088.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:08.550Z,1520551088.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:08.940Z,1520551088.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:09.333Z,1520551089.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:09.728Z,1520551089.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:10.118Z,1520551090.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:10.534Z,1520551090.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:10.935Z,1520551090.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:11.318Z,1520551091.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:11.714Z,1520551091.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:12.123Z,1520551092.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:12.519Z,1520551092.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:12.915Z,1520551092.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:13.327Z,1520551093.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:13.730Z,1520551093.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:14.122Z,1520551094.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:14.524Z,1520551094.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:14.924Z,1520551094.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:15.322Z,1520551095.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:15.729Z,1520551095.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:16.129Z,1520551096.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:16.542Z,1520551096.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:16.932Z,1520551096.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:17.318Z,1520551097.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:17.730Z,1520551097.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:18.135Z,1520551098.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:18.534Z,1520551098.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:18.919Z,1520551098.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:19.318Z,1520551099.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:19.729Z,1520551099.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:20.113Z,1520551100.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:20.529Z,1520551100.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:20.918Z,1520551100.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:21.318Z,1520551101.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:21.699Z,1520551101.699 [NAL9602](INFO): Powering down
2018-03-08T23:18:21.718Z,1520551101.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:22.129Z,1520551102.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:22.524Z,1520551102.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:22.916Z,1520551102.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:23.327Z,1520551103.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:23.724Z,1520551103.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:24.136Z,1520551104.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:24.528Z,1520551104.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:24.925Z,1520551104.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:25.325Z,1520551105.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:25.728Z,1520551105.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:26.121Z,1520551106.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:26.531Z,1520551106.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:26.924Z,1520551106.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:27.326Z,1520551107.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:27.714Z,1520551107.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:28.126Z,1520551108.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:28.526Z,1520551108.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:28.924Z,1520551108.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:29.322Z,1520551109.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:29.726Z,1520551109.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:30.126Z,1520551110.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:30.527Z,1520551110.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:30.926Z,1520551110.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:31.346Z,1520551111.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:31.725Z,1520551111.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:32.143Z,1520551112.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:32.516Z,1520551112.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:32.918Z,1520551112.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:41.731Z,1520551121.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:42.130Z,1520551122.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:42.529Z,1520551122.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:42.928Z,1520551122.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:43.323Z,1520551123.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:43.720Z,1520551123.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:44.127Z,1520551124.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:44.524Z,1520551124.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:44.922Z,1520551124.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:45.331Z,1520551125.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:45.715Z,1520551125.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:46.143Z,1520551126.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:46.518Z,1520551126.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:46.949Z,1520551126.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:47.319Z,1520551127.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:47.767Z,1520551127.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:48.122Z,1520551128.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:48.526Z,1520551128.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:48.923Z,1520551128.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:49.325Z,1520551129.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:49.725Z,1520551129.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:50.122Z,1520551130.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:50.522Z,1520551130.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:50.918Z,1520551130.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:51.314Z,1520551131.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:51.715Z,1520551131.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:52.118Z,1520551132.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:52.519Z,1520551132.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:52.915Z,1520551132.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:53.318Z,1520551133.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:53.744Z,1520551133.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:54.118Z,1520551134.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:54.526Z,1520551134.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:54.918Z,1520551134.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:55.322Z,1520551135.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:55.724Z,1520551135.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:56.129Z,1520551136.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:56.534Z,1520551136.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:56.930Z,1520551136.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:57.329Z,1520551137.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:57.728Z,1520551137.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:58.127Z,1520551138.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:58.527Z,1520551138.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:58.928Z,1520551138.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:59.339Z,1520551139.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:18:59.727Z,1520551139.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:00.132Z,1520551140.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:00.526Z,1520551140.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:00.948Z,1520551140.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:01.312Z,1520551141.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:01.735Z,1520551141.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:02.118Z,1520551142.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:02.515Z,1520551142.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:02.918Z,1520551142.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:03.334Z,1520551143.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:03.737Z,1520551143.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:04.139Z,1520551144.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:04.530Z,1520551144.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:04.916Z,1520551144.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:05.318Z,1520551145.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:05.718Z,1520551145.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:09.026Z,1520551149.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:09.162Z,1520551149.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:09.514Z,1520551149.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:09.906Z,1520551149.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:10.315Z,1520551150.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:10.698Z,1520551150.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:11.094Z,1520551151.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:11.498Z,1520551151.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:11.902Z,1520551151.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:12.300Z,1520551152.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:12.704Z,1520551152.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:13.103Z,1520551153.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:13.508Z,1520551153.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:13.907Z,1520551153.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:14.304Z,1520551154.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:14.712Z,1520551154.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:15.106Z,1520551155.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:15.511Z,1520551155.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:15.908Z,1520551155.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:16.299Z,1520551156.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:16.699Z,1520551156.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:17.094Z,1520551157.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:17.494Z,1520551157.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:17.898Z,1520551157.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:18.298Z,1520551158.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:18.702Z,1520551158.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:19.102Z,1520551159.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:19.498Z,1520551159.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:19.898Z,1520551159.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:20.305Z,1520551160.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:20.706Z,1520551160.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:21.110Z,1520551161.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:21.503Z,1520551161.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:21.915Z,1520551161.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:22.307Z,1520551162.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:22.706Z,1520551162.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:23.114Z,1520551163.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:23.503Z,1520551163.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:23.902Z,1520551163.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:24.304Z,1520551164.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:24.703Z,1520551164.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:25.101Z,1520551165.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:25.510Z,1520551165.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:25.907Z,1520551165.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:26.301Z,1520551166.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:26.703Z,1520551166.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:27.102Z,1520551167.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:27.500Z,1520551167.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:27.910Z,1520551167.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:28.310Z,1520551168.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:28.707Z,1520551168.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:29.098Z,1520551169.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:29.498Z,1520551169.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:29.898Z,1520551169.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:30.310Z,1520551170.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:30.694Z,1520551170.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:31.099Z,1520551171.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:31.502Z,1520551171.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:31.904Z,1520551171.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:32.310Z,1520551172.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:32.705Z,1520551172.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:33.103Z,1520551173.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:33.503Z,1520551173.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:33.907Z,1520551173.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:34.306Z,1520551174.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:34.705Z,1520551174.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:35.106Z,1520551175.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:35.505Z,1520551175.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:35.905Z,1520551175.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:36.298Z,1520551176.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:36.693Z,1520551176.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:37.099Z,1520551177.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:37.498Z,1520551177.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:37.894Z,1520551177.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:38.303Z,1520551178.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:38.699Z,1520551178.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:39.102Z,1520551179.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:39.502Z,1520551179.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:39.902Z,1520551179.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:40.298Z,1520551180.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:40.709Z,1520551180.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:41.104Z,1520551181.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:41.511Z,1520551181.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:41.913Z,1520551181.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:42.307Z,1520551182.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:42.700Z,1520551182.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:43.100Z,1520551183.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:43.498Z,1520551183.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:43.910Z,1520551183.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:44.340Z,1520551184.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:44.713Z,1520551184.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:45.103Z,1520551185.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:45.500Z,1520551185.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:45.907Z,1520551185.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:46.306Z,1520551186.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:46.706Z,1520551186.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:47.105Z,1520551187.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:47.502Z,1520551187.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:47.901Z,1520551187.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:48.307Z,1520551188.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:48.694Z,1520551188.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:49.098Z,1520551189.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:49.498Z,1520551189.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:49.898Z,1520551189.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:50.298Z,1520551190.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:50.698Z,1520551190.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:51.110Z,1520551191.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:51.508Z,1520551191.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:51.906Z,1520551191.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:52.306Z,1520551192.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:52.710Z,1520551192.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:53.103Z,1520551193.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:53.495Z,1520551193.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:53.911Z,1520551193.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:54.298Z,1520551194.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:54.695Z,1520551194.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:55.099Z,1520551195.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:55.499Z,1520551195.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:55.906Z,1520551195.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:56.307Z,1520551196.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:56.707Z,1520551196.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:57.106Z,1520551197.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:57.506Z,1520551197.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:57.915Z,1520551197.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:58.305Z,1520551198.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:58.701Z,1520551198.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:59.094Z,1520551199.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:59.498Z,1520551199.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:19:59.899Z,1520551199.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:00.297Z,1520551200.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:00.710Z,1520551200.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:01.119Z,1520551201.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:01.498Z,1520551201.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:01.924Z,1520551201.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:02.301Z,1520551202.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:02.698Z,1520551202.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:03.099Z,1520551203.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:03.498Z,1520551203.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:03.898Z,1520551203.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:04.299Z,1520551204.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:04.699Z,1520551204.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:05.097Z,1520551205.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:05.115Z,1520551205.115 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:20:05.115Z,1520551205.115 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-08T23:20:05.115Z,1520551205.115 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T23:20:05.138Z,1520551205.138 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T23:20:05.511Z,1520551205.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:05.696Z,1520551205.696 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T23:20:05.696Z,1520551205.696 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-08T23:20:09.165Z,1520551209.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:09.213Z,1520551209.213 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T23:20:09.214Z,1520551209.214 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T23:20:09.214Z,1520551209.214 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T23:20:09.306Z,1520551209.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:09.696Z,1520551209.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:10.072Z,1520551210.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:10.495Z,1520551210.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:10.866Z,1520551210.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:11.286Z,1520551211.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:11.662Z,1520551211.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:12.062Z,1520551212.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:12.502Z,1520551212.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:12.883Z,1520551212.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:13.285Z,1520551213.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:13.673Z,1520551213.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:14.083Z,1520551214.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:14.479Z,1520551214.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:14.865Z,1520551214.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:15.284Z,1520551215.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:15.678Z,1520551215.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:16.079Z,1520551216.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:16.457Z,1520551216.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:16.866Z,1520551216.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:17.266Z,1520551217.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:17.662Z,1520551217.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:18.063Z,1520551218.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:18.458Z,1520551218.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:18.859Z,1520551218.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:19.266Z,1520551219.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:19.662Z,1520551219.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:20.061Z,1520551220.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:20.462Z,1520551220.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:20.883Z,1520551220.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:21.295Z,1520551221.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:21.668Z,1520551221.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:22.079Z,1520551222.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:22.467Z,1520551222.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:22.867Z,1520551222.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:23.280Z,1520551223.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:23.675Z,1520551223.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:24.073Z,1520551224.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:24.474Z,1520551224.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:24.897Z,1520551224.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:25.275Z,1520551225.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:25.707Z,1520551225.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:26.093Z,1520551226.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:26.491Z,1520551226.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:26.900Z,1520551226.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:27.304Z,1520551227.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:27.682Z,1520551227.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:28.066Z,1520551228.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:28.458Z,1520551228.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:28.879Z,1520551228.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:29.264Z,1520551229.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:29.663Z,1520551229.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:30.078Z,1520551230.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:30.464Z,1520551230.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:30.863Z,1520551230.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:31.262Z,1520551231.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:31.668Z,1520551231.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:32.071Z,1520551232.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:32.533Z,1520551232.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:32.885Z,1520551232.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:33.275Z,1520551233.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:33.666Z,1520551233.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:34.093Z,1520551234.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:34.501Z,1520551234.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:34.865Z,1520551234.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:35.296Z,1520551235.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:35.679Z,1520551235.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:36.078Z,1520551236.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:36.478Z,1520551236.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:36.865Z,1520551236.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:37.285Z,1520551237.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:37.662Z,1520551237.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:38.057Z,1520551238.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:38.461Z,1520551238.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:38.866Z,1520551238.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:39.262Z,1520551239.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:39.666Z,1520551239.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:40.062Z,1520551240.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:40.462Z,1520551240.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:40.862Z,1520551240.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:41.262Z,1520551241.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:41.666Z,1520551241.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:42.067Z,1520551242.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:42.484Z,1520551242.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:42.893Z,1520551242.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:43.285Z,1520551243.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:43.681Z,1520551243.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:44.074Z,1520551244.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:44.480Z,1520551244.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:44.880Z,1520551244.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:45.274Z,1520551245.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:45.668Z,1520551245.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:46.071Z,1520551246.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:46.485Z,1520551246.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:46.873Z,1520551246.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:47.267Z,1520551247.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:47.663Z,1520551247.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:48.067Z,1520551248.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:48.463Z,1520551248.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:48.868Z,1520551248.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:49.311Z,1520551249.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:49.667Z,1520551249.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:50.104Z,1520551250.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:50.484Z,1520551250.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:50.867Z,1520551250.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:51.264Z,1520551251.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:51.679Z,1520551251.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:52.079Z,1520551252.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:52.478Z,1520551252.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:52.872Z,1520551252.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:53.258Z,1520551253.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:53.663Z,1520551253.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:54.071Z,1520551254.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:54.503Z,1520551254.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:54.897Z,1520551254.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:55.286Z,1520551255.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:55.666Z,1520551255.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:56.066Z,1520551256.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:56.477Z,1520551256.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:56.858Z,1520551256.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:57.294Z,1520551257.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:57.662Z,1520551257.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:58.084Z,1520551258.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:58.479Z,1520551258.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:58.862Z,1520551258.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:59.284Z,1520551259.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:20:59.679Z,1520551259.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:00.062Z,1520551260.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:00.476Z,1520551260.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:00.862Z,1520551260.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:01.263Z,1520551261.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:01.662Z,1520551261.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:02.061Z,1520551262.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:02.462Z,1520551262.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:02.862Z,1520551262.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:03.262Z,1520551263.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:03.666Z,1520551263.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:04.066Z,1520551264.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:04.462Z,1520551264.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:04.866Z,1520551264.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:05.262Z,1520551265.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:05.666Z,1520551265.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:08.944Z,1520551268.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:09.068Z,1520551269.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:09.467Z,1520551269.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:09.863Z,1520551269.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:10.267Z,1520551270.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:10.667Z,1520551270.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:11.062Z,1520551271.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:11.462Z,1520551271.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:11.868Z,1520551271.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:12.266Z,1520551272.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:12.666Z,1520551272.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:13.061Z,1520551273.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:13.470Z,1520551273.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:13.866Z,1520551273.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:14.258Z,1520551274.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:14.654Z,1520551274.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:15.058Z,1520551275.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:15.458Z,1520551275.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:15.857Z,1520551275.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:16.258Z,1520551276.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:16.658Z,1520551276.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:17.058Z,1520551277.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:17.457Z,1520551277.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:17.857Z,1520551277.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:18.258Z,1520551278.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:18.663Z,1520551278.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:19.067Z,1520551279.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:19.465Z,1520551279.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:19.866Z,1520551279.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:20.261Z,1520551280.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:20.666Z,1520551280.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:21.066Z,1520551281.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:21.458Z,1520551281.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:21.858Z,1520551281.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:22.262Z,1520551282.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:22.657Z,1520551282.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:23.078Z,1520551283.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:23.455Z,1520551283.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:23.866Z,1520551283.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:24.270Z,1520551284.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:24.658Z,1520551284.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:25.059Z,1520551285.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:25.460Z,1520551285.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:25.864Z,1520551285.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:26.267Z,1520551286.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:26.667Z,1520551286.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:27.066Z,1520551287.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:27.464Z,1520551287.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:27.858Z,1520551287.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:28.275Z,1520551288.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:28.654Z,1520551288.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:29.054Z,1520551289.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:29.458Z,1520551289.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:29.853Z,1520551289.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:30.259Z,1520551290.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:30.658Z,1520551290.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:31.058Z,1520551291.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:31.466Z,1520551291.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:31.863Z,1520551291.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:32.267Z,1520551292.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:32.658Z,1520551292.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:33.063Z,1520551293.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:33.463Z,1520551293.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:33.860Z,1520551293.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:34.263Z,1520551294.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:34.665Z,1520551294.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:35.066Z,1520551295.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:35.467Z,1520551295.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:35.858Z,1520551295.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:36.258Z,1520551296.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:36.658Z,1520551296.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:37.058Z,1520551297.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:37.462Z,1520551297.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:37.862Z,1520551297.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:38.259Z,1520551298.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:38.666Z,1520551298.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:39.066Z,1520551299.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:39.470Z,1520551299.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:39.866Z,1520551299.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:40.261Z,1520551300.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:40.665Z,1520551300.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:41.061Z,1520551301.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:41.467Z,1520551301.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:41.882Z,1520551301.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:42.308Z,1520551302.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:42.668Z,1520551302.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:43.068Z,1520551303.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:43.468Z,1520551303.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:43.867Z,1520551303.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:44.261Z,1520551304.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:44.673Z,1520551304.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:45.071Z,1520551305.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:45.465Z,1520551305.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:45.859Z,1520551305.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:46.276Z,1520551306.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:46.666Z,1520551306.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:47.055Z,1520551307.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:47.469Z,1520551307.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:47.865Z,1520551307.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:48.255Z,1520551308.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:48.658Z,1520551308.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:49.063Z,1520551309.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:49.463Z,1520551309.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:49.858Z,1520551309.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:50.274Z,1520551310.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:50.657Z,1520551310.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:51.066Z,1520551311.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:51.476Z,1520551311.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:51.858Z,1520551311.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:52.254Z,1520551312.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:52.653Z,1520551312.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:53.058Z,1520551313.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:53.458Z,1520551313.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:53.858Z,1520551313.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:54.266Z,1520551314.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:54.662Z,1520551314.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:55.058Z,1520551315.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:55.462Z,1520551315.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:55.866Z,1520551315.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:56.259Z,1520551316.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:56.658Z,1520551316.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:57.058Z,1520551317.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:57.478Z,1520551317.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:57.857Z,1520551317.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:58.254Z,1520551318.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:58.674Z,1520551318.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:59.058Z,1520551319.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:59.451Z,1520551319.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:21:59.867Z,1520551319.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:00.266Z,1520551320.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:00.663Z,1520551320.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:01.063Z,1520551321.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:01.495Z,1520551321.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:01.858Z,1520551321.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:02.258Z,1520551322.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:02.654Z,1520551322.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:03.057Z,1520551323.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:03.458Z,1520551323.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:03.858Z,1520551323.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:04.279Z,1520551324.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:04.661Z,1520551324.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:04.703Z,1520551324.703 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T23:22:05.054Z,1520551325.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:05.458Z,1520551325.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:05.868Z,1520551325.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:09.188Z,1520551329.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:09.347Z,1520551329.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:09.677Z,1520551329.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:10.053Z,1520551330.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:10.458Z,1520551330.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:10.858Z,1520551330.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:11.258Z,1520551331.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:11.655Z,1520551331.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:12.058Z,1520551332.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:12.458Z,1520551332.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:12.857Z,1520551332.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:13.280Z,1520551333.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:13.680Z,1520551333.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:14.062Z,1520551334.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:14.463Z,1520551334.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:14.867Z,1520551334.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:15.267Z,1520551335.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:15.664Z,1520551335.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:16.066Z,1520551336.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:16.485Z,1520551336.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:16.860Z,1520551336.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:17.262Z,1520551337.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:17.325Z,1520551337.325 [BPC1](ERROR): Bank A: No match for stick 1 serial number:1717 in the onboard configuration file.
2018-03-08T23:22:17.325Z,1520551337.325 [BPC1](ERROR): Failed to parse Bank A battery data
2018-03-08T23:22:17.326Z,1520551337.326 [BPC1] Data Fault, FailCount= 1
2018-03-08T23:22:17.326Z,1520551337.326 [BPC1](ERROR): Data Fault
2018-03-08T23:22:17.397Z,1520551337.397 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-08T23:22:17.658Z,1520551337.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:18.065Z,1520551338.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:18.466Z,1520551338.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:18.527Z,1520551338.527 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-08T23:22:18.527Z,1520551338.527 [BPC1] No Fault, FailCount= 1
2018-03-08T23:22:18.863Z,1520551338.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:19.262Z,1520551339.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:19.667Z,1520551339.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:20.061Z,1520551340.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:20.467Z,1520551340.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:20.867Z,1520551340.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:21.274Z,1520551341.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:21.666Z,1520551341.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:22.062Z,1520551342.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:22.473Z,1520551342.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:22.873Z,1520551342.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:23.267Z,1520551343.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:23.664Z,1520551343.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:24.067Z,1520551344.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:24.503Z,1520551344.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:24.854Z,1520551344.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:25.258Z,1520551345.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:25.657Z,1520551345.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:26.059Z,1520551346.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:26.462Z,1520551346.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:26.862Z,1520551346.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:27.258Z,1520551347.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:27.658Z,1520551347.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:28.059Z,1520551348.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:28.466Z,1520551348.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:28.863Z,1520551348.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:29.267Z,1520551349.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:29.659Z,1520551349.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:30.065Z,1520551350.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:30.466Z,1520551350.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:30.864Z,1520551350.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:31.258Z,1520551351.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:31.693Z,1520551351.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:32.058Z,1520551352.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:32.458Z,1520551352.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:32.859Z,1520551352.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:33.265Z,1520551353.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:33.666Z,1520551353.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:34.064Z,1520551354.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:34.482Z,1520551354.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:34.865Z,1520551354.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:35.258Z,1520551355.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:35.659Z,1520551355.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:36.058Z,1520551356.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:36.458Z,1520551356.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:36.858Z,1520551356.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:37.258Z,1520551357.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:37.659Z,1520551357.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:38.066Z,1520551358.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:38.497Z,1520551358.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:38.864Z,1520551358.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:39.262Z,1520551359.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:39.708Z,1520551359.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:40.063Z,1520551360.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:40.513Z,1520551360.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:40.865Z,1520551360.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:41.264Z,1520551361.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:41.665Z,1520551361.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:42.085Z,1520551362.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:42.491Z,1520551362.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:42.859Z,1520551362.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:43.262Z,1520551363.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:43.651Z,1520551363.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:44.057Z,1520551364.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:44.465Z,1520551364.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:44.862Z,1520551364.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:45.266Z,1520551365.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:45.666Z,1520551365.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:46.067Z,1520551366.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:46.465Z,1520551366.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:46.866Z,1520551366.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:47.289Z,1520551367.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:47.666Z,1520551367.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:48.065Z,1520551368.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:48.465Z,1520551368.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:48.899Z,1520551368.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:49.258Z,1520551369.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:49.658Z,1520551369.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:50.084Z,1520551370.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:50.458Z,1520551370.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:50.858Z,1520551370.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:51.258Z,1520551371.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:51.687Z,1520551371.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:52.063Z,1520551372.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:52.462Z,1520551372.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:52.858Z,1520551372.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:53.262Z,1520551373.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:53.662Z,1520551373.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:54.058Z,1520551374.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:54.458Z,1520551374.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:54.864Z,1520551374.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:55.263Z,1520551375.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:55.658Z,1520551375.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:56.066Z,1520551376.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:56.466Z,1520551376.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:56.865Z,1520551376.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:57.265Z,1520551377.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:57.668Z,1520551377.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:58.068Z,1520551378.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:58.465Z,1520551378.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:58.864Z,1520551378.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:59.279Z,1520551379.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:22:59.680Z,1520551379.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:00.063Z,1520551380.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:00.458Z,1520551380.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:00.895Z,1520551380.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:01.259Z,1520551381.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:01.657Z,1520551381.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:02.058Z,1520551382.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:02.464Z,1520551382.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:02.885Z,1520551382.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:03.293Z,1520551383.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:03.664Z,1520551383.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:04.083Z,1520551384.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:04.458Z,1520551384.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:04.858Z,1520551384.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:04.912Z,1520551384.912 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T23:23:04.912Z,1520551384.912 [Default:CheckIn:C.Wait] Stopped
2018-03-08T23:23:04.912Z,1520551384.912 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T23:23:04.917Z,1520551384.917 [Default:CheckIn:D] Running Loop=1
2018-03-08T23:23:05.304Z,1520551385.304 [Default:CheckIn:D] Stopped
2018-03-08T23:23:05.304Z,1520551385.304 [Default:CheckIn:E] Running Loop=1
2018-03-08T23:23:05.705Z,1520551385.705 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 937.341667 min 
2018-03-08T23:23:05.705Z,1520551385.705 [Default:CheckIn:E] Stopped
2018-03-08T23:23:05.705Z,1520551385.705 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T23:23:05.706Z,1520551385.706 [Default:CheckIn] Stopped
2018-03-08T23:23:05.706Z,1520551385.706 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T23:23:05.706Z,1520551385.706 [Default:CheckIn](INFO): Running loop #92
2018-03-08T23:23:05.706Z,1520551385.706 [Default:CheckIn] Running Loop=92
2018-03-08T23:23:05.706Z,1520551385.706 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T23:23:05.706Z,1520551385.706 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T23:23:09.376Z,1520551389.376 [NAL9602](INFO): Powering up
2018-03-08T23:23:09.421Z,1520551389.421 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:23:09.421Z,1520551389.421 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-08T23:23:09.421Z,1520551389.421 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T23:23:09.433Z,1520551389.433 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T23:23:09.577Z,1520551389.577 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T23:23:09.577Z,1520551389.577 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-08T23:23:09.903Z,1520551389.903 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T23:23:09.903Z,1520551389.903 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T23:23:09.904Z,1520551389.904 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T23:23:13.866Z,1520551393.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:14.266Z,1520551394.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:14.670Z,1520551394.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:15.067Z,1520551395.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:15.466Z,1520551395.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:15.873Z,1520551395.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:16.271Z,1520551396.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:16.674Z,1520551396.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:17.072Z,1520551397.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:17.479Z,1520551397.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:17.879Z,1520551397.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:18.273Z,1520551398.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:18.663Z,1520551398.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:19.074Z,1520551399.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:19.474Z,1520551399.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:19.882Z,1520551399.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:20.254Z,1520551400.254 [NAL9602](INFO): NAL9602 initialized
2018-03-08T23:23:20.270Z,1520551400.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:20.687Z,1520551400.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:21.077Z,1520551401.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:21.485Z,1520551401.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:21.904Z,1520551401.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:22.274Z,1520551402.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:22.674Z,1520551402.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:23.085Z,1520551403.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:23.474Z,1520551403.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:23.871Z,1520551403.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:24.275Z,1520551404.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:24.676Z,1520551404.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:25.066Z,1520551405.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:25.466Z,1520551405.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:25.866Z,1520551405.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:26.266Z,1520551406.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:26.667Z,1520551406.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:27.071Z,1520551407.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:27.471Z,1520551407.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:27.871Z,1520551407.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:28.275Z,1520551408.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:28.674Z,1520551408.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:29.072Z,1520551409.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:29.485Z,1520551409.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:29.889Z,1520551409.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:30.266Z,1520551410.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:30.666Z,1520551410.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:31.087Z,1520551411.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:31.467Z,1520551411.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:31.866Z,1520551411.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:32.266Z,1520551412.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:32.670Z,1520551412.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:33.066Z,1520551413.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:33.466Z,1520551413.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:33.877Z,1520551413.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:34.277Z,1520551414.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:34.666Z,1520551414.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:35.072Z,1520551415.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:35.482Z,1520551415.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:35.874Z,1520551415.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:36.276Z,1520551416.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:36.676Z,1520551416.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:37.077Z,1520551417.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:37.473Z,1520551417.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:37.873Z,1520551417.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:38.274Z,1520551418.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:38.674Z,1520551418.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:39.066Z,1520551419.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:39.474Z,1520551419.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:39.875Z,1520551419.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:40.274Z,1520551420.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:40.675Z,1520551420.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:41.072Z,1520551421.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:41.477Z,1520551421.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:41.875Z,1520551421.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:42.278Z,1520551422.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:42.688Z,1520551422.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:43.084Z,1520551423.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:43.485Z,1520551423.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:43.866Z,1520551423.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:44.277Z,1520551424.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:44.666Z,1520551424.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:45.082Z,1520551425.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:45.468Z,1520551425.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:45.877Z,1520551425.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:23:46.293Z,1520551426.293 [DAT](FAULT): unknown deviceResponse_: S14=000  S15=001  S16=001  S1 SNR:-5.6 MPD:03.3 SPD:+00.0

2018-03-08T23:23:46.293Z,1520551426.293 [DAT] Communications Fault, FailCount= 2
2018-03-08T23:23:46.293Z,1520551426.293 [DAT](ERROR): Communications Fault
2018-03-08T23:23:46.390Z,1520551426.390 [CBIT](ERROR): Communications Fault in component: DAT
2018-03-08T23:23:46.667Z,1520551426.667 [DAT](INFO): Powering down
2018-03-08T23:23:47.514Z,1520551427.514 [CBIT](INFO): Clearing failed state for component DAT
2018-03-08T23:23:47.514Z,1520551427.514 [DAT] No Fault, FailCount= 2
2018-03-08T23:23:49.881Z,1520551429.881 [DAT](INFO): Powering up
2018-03-08T23:23:49.881Z,1520551429.881 [DAT](DEBUG): Initializing DAT.
2018-03-08T23:24:50.020Z,1520551490.020 [DAT](FAULT): failed to initialize; deviceResponse_ loaded: , available: G: battery low
ðO
2018-03-08T23:24:50.020Z,1520551490.020 [DAT] Communications Fault, FailCount= 3
2018-03-08T23:24:50.020Z,1520551490.020 [DAT](ERROR): Communications Fault
2018-03-08T23:24:50.102Z,1520551490.102 [CBIT](ERROR): Communications Fault in component: DAT
2018-03-08T23:24:50.423Z,1520551490.423 [DAT](INFO): Powering down
2018-03-08T23:24:51.279Z,1520551491.279 [CBIT](INFO): Clearing failed state for component DAT
2018-03-08T23:24:51.279Z,1520551491.279 [DAT] No Fault, FailCount= 3
2018-03-08T23:24:53.618Z,1520551493.618 [DAT](INFO): Powering up
2018-03-08T23:24:53.618Z,1520551493.618 [DAT](DEBUG): Initializing DAT.
2018-03-08T23:25:31.603Z,1520551531.603 [NAL9602](INFO): SBD MO Status=0, MOMSN=4897, MT Status=0, MTMSN=0
2018-03-08T23:25:31.603Z,1520551531.603 [NAL9602](INFO): No messages in MT queue
2018-03-08T23:25:32.801Z,1520551532.801 [NAL9602](INFO): GPS fix at 20180308T232451: (21.316522, -157.875962)
2018-03-08T23:25:32.882Z,1520551532.882 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T23:25:32.882Z,1520551532.882 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T23:25:37.981Z,1520551537.981 [DataOverHttps](INFO): Sending 62 bytes from file Logs/20180308T074127/Courier0368.lzma
2018-03-08T23:25:38.780Z,1520551538.780 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0368.lzma.bak
2018-03-08T23:25:38.780Z,1520551538.780 [DataOverHttps](INFO): SBD MOMSN=7990072
2018-03-08T23:25:50.645Z,1520551550.645 [DataOverHttps](INFO): Sending 254 bytes from file Logs/20180308T074127/Express0369.lzma
2018-03-08T23:25:51.444Z,1520551551.444 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0369.lzma.bak
2018-03-08T23:25:51.444Z,1520551551.444 [DataOverHttps](INFO): SBD MOMSN=7990076
2018-03-08T23:25:52.101Z,1520551552.101 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T23:25:52.101Z,1520551552.101 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T23:25:52.101Z,1520551552.101 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T23:25:55.539Z,1520551555.539 [DAT](FAULT): failed to initialize; deviceResponse_ loaded: , available: 
2018-03-08T23:25:55.539Z,1520551555.539 [DAT] Communications Fault, FailCount= 4
2018-03-08T23:25:55.539Z,1520551555.539 [DAT](ERROR): Communications Fault
2018-03-08T23:25:55.599Z,1520551555.599 [CBIT](ERROR): Communications Fault in component: DAT
2018-03-08T23:25:55.666Z,1520551555.666 [DAT](INFO): Powering down
2018-03-08T23:25:56.508Z,1520551556.508 [CBIT](INFO): Clearing failed state for component DAT
2018-03-08T23:25:56.508Z,1520551556.508 [DAT] No Fault, FailCount= 4
2018-03-08T23:25:58.841Z,1520551558.841 [DAT](INFO): Powering up
2018-03-08T23:25:58.842Z,1520551558.842 [DAT](DEBUG): Initializing DAT.
2018-03-08T23:26:07.618Z,1520551567.618 [NAL9602](INFO): Powering down
2018-03-08T23:26:10.085Z,1520551570.085 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:26:10.085Z,1520551570.085 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-08T23:26:10.085Z,1520551570.085 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T23:26:10.114Z,1520551570.114 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T23:26:10.504Z,1520551570.504 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T23:26:10.505Z,1520551570.505 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-08T23:26:10.852Z,1520551570.852 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T23:26:10.852Z,1520551570.852 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T23:26:10.853Z,1520551570.853 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T23:26:59.042Z,1520551619.042 [DAT](FAULT): failed to initialize; deviceResponse_ loaded: , available: 
2018-03-08T23:26:59.042Z,1520551619.042 [DAT] Communications Fault, FailCount= 5
2018-03-08T23:26:59.042Z,1520551619.042 [DAT](ERROR): Communications Fault
2018-03-08T23:26:59.071Z,1520551619.071 [CBIT](ERROR): Communications Fault in component: DAT
2018-03-08T23:26:59.442Z,1520551619.442 [DAT](INFO): Powering down
2018-03-08T23:27:00.271Z,1520551620.271 [CBIT](INFO): Clearing failed state for component DAT
2018-03-08T23:27:00.271Z,1520551620.271 [DAT] No Fault, FailCount= 5
2018-03-08T23:27:02.642Z,1520551622.642 [DAT](INFO): Powering up
2018-03-08T23:27:02.643Z,1520551622.643 [DAT](DEBUG): Initializing DAT.
2018-03-08T23:27:14.621Z,1520551634.621 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-03-08T23:27:14.621Z,1520551634.621 [DropWeight] Hardware Fault, FailCount= 1
2018-03-08T23:27:14.621Z,1520551634.621 [DropWeight](ERROR): Hardware Fault
2018-03-08T23:27:14.712Z,1520551634.712 [CBIT](INFO): Critical error at 20180308T232714
2018-03-08T23:27:14.714Z,1520551634.714 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-03-08T23:27:14.715Z,1520551634.715 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-03-08T23:27:15.075Z,1520551635.075 [CBIT](INFO): Critical error at 20180308T232714
2018-03-08T23:28:02.759Z,1520551682.759 [DAT](FAULT): failed to initialize; deviceResponse_ loaded: , available: 
2018-03-08T23:28:02.759Z,1520551682.759 [DAT] Communications Fault, FailCount= 6
2018-03-08T23:28:02.760Z,1520551682.760 [DAT](ERROR): Communications Fault
2018-03-08T23:28:02.832Z,1520551682.832 [CBIT](ERROR): Communications Fault in component: DAT
2018-03-08T23:28:03.161Z,1520551683.161 [DAT](INFO): Powering down
2018-03-08T23:28:04.014Z,1520551684.014 [CBIT](INFO): Clearing failed state for component DAT
2018-03-08T23:28:04.014Z,1520551684.014 [DAT] No Fault, FailCount= 6
2018-03-08T23:28:06.366Z,1520551686.366 [DAT](INFO): Powering up
2018-03-08T23:28:06.366Z,1520551686.366 [DAT](DEBUG): Initializing DAT.
2018-03-08T23:28:19.957Z,1520551699.957 [DAT](INFO): setting local address to 1
2018-03-08T23:28:20.356Z,1520551700.356 [DAT](INFO): set local address to 1
2018-03-08T23:29:10.862Z,1520551750.862 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:29:10.862Z,1520551750.862 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-08T23:29:10.862Z,1520551750.862 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T23:29:10.899Z,1520551750.899 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T23:29:11.272Z,1520551751.272 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T23:29:11.272Z,1520551751.272 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-08T23:29:11.656Z,1520551751.656 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T23:29:11.657Z,1520551751.657 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T23:29:11.657Z,1520551751.657 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T23:30:52.569Z,1520551852.569 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T23:30:52.569Z,1520551852.569 [Default:CheckIn:C.Wait] Stopped
2018-03-08T23:30:52.569Z,1520551852.569 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T23:30:52.569Z,1520551852.569 [Default:CheckIn:D] Running Loop=1
2018-03-08T23:30:52.980Z,1520551852.980 [Default:CheckIn:D] Stopped
2018-03-08T23:30:52.980Z,1520551852.980 [Default:CheckIn:E] Running Loop=1
2018-03-08T23:30:53.367Z,1520551853.367 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 945.136263 min 
2018-03-08T23:30:53.367Z,1520551853.367 [Default:CheckIn:E] Stopped
2018-03-08T23:30:53.367Z,1520551853.367 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T23:30:53.367Z,1520551853.367 [Default:CheckIn] Stopped
2018-03-08T23:30:53.367Z,1520551853.367 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T23:30:53.367Z,1520551853.367 [Default:CheckIn](INFO): Running loop #93
2018-03-08T23:30:53.368Z,1520551853.368 [Default:CheckIn] Running Loop=93
2018-03-08T23:30:53.368Z,1520551853.368 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T23:30:53.368Z,1520551853.368 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T23:30:56.711Z,1520551856.711 [NAL9602](INFO): Powering up
2018-03-08T23:31:07.116Z,1520551867.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:07.523Z,1520551867.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:07.894Z,1520551867.894 [NAL9602](INFO): NAL9602 initialized
2018-03-08T23:31:07.922Z,1520551867.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:08.322Z,1520551868.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:08.729Z,1520551868.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:09.129Z,1520551869.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:09.526Z,1520551869.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:09.907Z,1520551869.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:10.315Z,1520551870.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:10.716Z,1520551870.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:11.125Z,1520551871.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:11.521Z,1520551871.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:11.916Z,1520551871.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:12.323Z,1520551872.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:12.718Z,1520551872.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:13.110Z,1520551873.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:13.510Z,1520551873.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:13.909Z,1520551873.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:14.311Z,1520551874.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:14.710Z,1520551874.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:15.126Z,1520551875.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:15.518Z,1520551875.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:15.918Z,1520551875.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:16.318Z,1520551876.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:16.715Z,1520551876.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:17.117Z,1520551877.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:17.533Z,1520551877.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:17.921Z,1520551877.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:18.319Z,1520551878.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:18.719Z,1520551878.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:19.119Z,1520551879.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:19.520Z,1520551879.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:19.917Z,1520551879.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:20.310Z,1520551880.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:20.710Z,1520551880.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:21.130Z,1520551881.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:21.521Z,1520551881.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:21.910Z,1520551881.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:22.329Z,1520551882.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:22.710Z,1520551882.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:23.110Z,1520551883.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:23.512Z,1520551883.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:23.918Z,1520551883.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:24.310Z,1520551884.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:24.715Z,1520551884.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:25.114Z,1520551885.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:25.525Z,1520551885.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:25.923Z,1520551885.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:26.321Z,1520551886.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:26.720Z,1520551886.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:27.127Z,1520551887.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:27.519Z,1520551887.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:27.911Z,1520551887.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:28.310Z,1520551888.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:28.710Z,1520551888.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:29.106Z,1520551889.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:29.510Z,1520551889.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:29.910Z,1520551889.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:30.306Z,1520551890.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:30.710Z,1520551890.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:31.110Z,1520551891.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:31.516Z,1520551891.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:31.918Z,1520551891.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:32.314Z,1520551892.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:32.695Z,1520551892.695 [NAL9602](INFO): SBD MO Status=0, MOMSN=4898, MT Status=0, MTMSN=0
2018-03-08T23:31:32.695Z,1520551892.695 [NAL9602](INFO): No messages in MT queue
2018-03-08T23:31:32.721Z,1520551892.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:33.131Z,1520551893.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:33.533Z,1520551893.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:33.924Z,1520551893.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:34.353Z,1520551894.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:34.710Z,1520551894.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:35.119Z,1520551895.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:35.525Z,1520551895.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:35.921Z,1520551895.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:36.320Z,1520551896.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:36.732Z,1520551896.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:37.093Z,1520551897.093 [NAL9602](INFO): GPS fix at 20180308T233056: (21.316547, -157.876161)
2018-03-08T23:31:37.110Z,1520551897.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:37.187Z,1520551897.187 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T23:31:37.187Z,1520551897.187 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T23:31:37.529Z,1520551897.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:38.026Z,1520551898.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:38.311Z,1520551898.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:38.735Z,1520551898.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:42.445Z,1520551902.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:42.598Z,1520551902.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:42.961Z,1520551902.961 [DataOverHttps](INFO): Sending 155 bytes from file Logs/20180308T074127/Courier0372.lzma
2018-03-08T23:31:43.005Z,1520551903.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:43.379Z,1520551903.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:43.760Z,1520551903.760 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0372.lzma.bak
2018-03-08T23:31:43.760Z,1520551903.760 [DataOverHttps](INFO): SBD MOMSN=7990088
2018-03-08T23:31:43.782Z,1520551903.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:44.385Z,1520551904.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:44.600Z,1520551904.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:48.539Z,1520551908.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:48.671Z,1520551908.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:49.027Z,1520551909.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:49.425Z,1520551909.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:49.826Z,1520551909.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:50.226Z,1520551910.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:50.625Z,1520551910.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:54.001Z,1520551914.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:54.134Z,1520551914.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:54.457Z,1520551914.457 [DataOverHttps](INFO): Sending 191 bytes from file Logs/20180308T074127/Express0373.lzma
2018-03-08T23:31:54.519Z,1520551914.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:54.891Z,1520551914.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:55.256Z,1520551915.256 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0373.lzma.bak
2018-03-08T23:31:55.256Z,1520551915.256 [DataOverHttps](INFO): SBD MOMSN=7990094
2018-03-08T23:31:55.306Z,1520551915.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:55.866Z,1520551915.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:55.895Z,1520551915.895 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T23:31:55.895Z,1520551915.895 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T23:31:55.895Z,1520551915.895 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T23:31:56.089Z,1520551916.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:59.395Z,1520551919.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:59.504Z,1520551919.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:31:59.867Z,1520551919.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:00.263Z,1520551920.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:00.674Z,1520551920.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:01.066Z,1520551921.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:01.462Z,1520551921.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:01.869Z,1520551921.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:02.266Z,1520551922.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:02.651Z,1520551922.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:03.070Z,1520551923.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:03.458Z,1520551923.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:03.854Z,1520551923.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:04.254Z,1520551924.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:04.658Z,1520551924.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:04.706Z,1520551924.706 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T23:32:05.058Z,1520551925.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:05.454Z,1520551925.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:05.857Z,1520551925.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:06.258Z,1520551926.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:06.658Z,1520551926.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:07.058Z,1520551927.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:07.458Z,1520551927.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:07.860Z,1520551927.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:08.266Z,1520551928.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:08.659Z,1520551928.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:09.065Z,1520551929.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:09.464Z,1520551929.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:09.859Z,1520551929.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:10.264Z,1520551930.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:10.668Z,1520551930.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:11.051Z,1520551931.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:11.470Z,1520551931.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:11.876Z,1520551931.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:11.894Z,1520551931.894 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:32:11.894Z,1520551931.894 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-08T23:32:11.894Z,1520551931.894 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T23:32:11.937Z,1520551931.937 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T23:32:12.258Z,1520551932.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:12.298Z,1520551932.298 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T23:32:12.298Z,1520551932.298 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-08T23:32:12.641Z,1520551932.641 [NAL9602](INFO): Powering down
2018-03-08T23:32:12.660Z,1520551932.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:12.709Z,1520551932.709 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T23:32:12.710Z,1520551932.710 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T23:32:12.710Z,1520551932.710 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T23:32:13.058Z,1520551933.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:13.455Z,1520551933.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:13.858Z,1520551933.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:14.274Z,1520551934.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:14.659Z,1520551934.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:15.066Z,1520551935.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:15.466Z,1520551935.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:15.863Z,1520551935.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:16.262Z,1520551936.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:16.661Z,1520551936.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:17.061Z,1520551937.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:17.470Z,1520551937.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:17.870Z,1520551937.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:18.258Z,1520551938.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:18.678Z,1520551938.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:19.058Z,1520551939.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:19.458Z,1520551939.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:19.858Z,1520551939.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:20.258Z,1520551940.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:20.662Z,1520551940.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:21.057Z,1520551941.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:21.466Z,1520551941.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:21.867Z,1520551941.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:22.263Z,1520551942.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:22.666Z,1520551942.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:23.062Z,1520551943.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:23.467Z,1520551943.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:23.869Z,1520551943.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:24.255Z,1520551944.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:24.659Z,1520551944.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:25.059Z,1520551945.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:25.458Z,1520551945.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:25.859Z,1520551945.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:26.258Z,1520551946.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:26.659Z,1520551946.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:27.058Z,1520551947.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:27.458Z,1520551947.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:27.854Z,1520551947.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:28.258Z,1520551948.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:28.666Z,1520551948.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:29.066Z,1520551949.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:29.451Z,1520551949.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:29.870Z,1520551949.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:30.254Z,1520551950.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:30.651Z,1520551950.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:31.070Z,1520551951.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:31.454Z,1520551951.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:31.856Z,1520551951.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:32.258Z,1520551952.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:32.658Z,1520551952.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:33.054Z,1520551953.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:33.478Z,1520551953.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:33.858Z,1520551953.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:34.254Z,1520551954.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:34.658Z,1520551954.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:35.058Z,1520551955.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:35.456Z,1520551955.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:35.859Z,1520551955.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:36.263Z,1520551956.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:36.664Z,1520551956.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:37.067Z,1520551957.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:37.466Z,1520551957.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:37.858Z,1520551957.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:38.270Z,1520551958.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:38.667Z,1520551958.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:39.058Z,1520551959.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:39.475Z,1520551959.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:39.860Z,1520551959.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:40.265Z,1520551960.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:40.663Z,1520551960.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:41.061Z,1520551961.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:41.466Z,1520551961.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:41.877Z,1520551961.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:42.253Z,1520551962.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:42.655Z,1520551962.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:43.058Z,1520551963.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:43.462Z,1520551963.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:43.855Z,1520551963.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:44.258Z,1520551964.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:44.662Z,1520551964.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:45.058Z,1520551965.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:45.463Z,1520551965.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:45.858Z,1520551965.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:46.267Z,1520551966.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:46.664Z,1520551966.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:47.065Z,1520551967.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:47.462Z,1520551967.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:47.866Z,1520551967.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:48.266Z,1520551968.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:48.661Z,1520551968.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:49.062Z,1520551969.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:49.469Z,1520551969.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:49.854Z,1520551969.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:50.258Z,1520551970.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:50.658Z,1520551970.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:51.055Z,1520551971.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:51.458Z,1520551971.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:51.853Z,1520551971.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:52.262Z,1520551972.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:52.658Z,1520551972.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:53.058Z,1520551973.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:53.454Z,1520551973.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:53.878Z,1520551973.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:54.257Z,1520551974.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:54.655Z,1520551974.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:55.058Z,1520551975.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:55.457Z,1520551975.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:55.856Z,1520551975.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:56.274Z,1520551976.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:56.670Z,1520551976.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:32:59.894Z,1520551979.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:00.018Z,1520551980.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:00.382Z,1520551980.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:00.775Z,1520551980.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:01.176Z,1520551981.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:01.588Z,1520551981.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:01.969Z,1520551981.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:02.380Z,1520551982.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:02.781Z,1520551982.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:03.178Z,1520551983.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:03.583Z,1520551983.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:03.978Z,1520551983.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:04.377Z,1520551984.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:04.784Z,1520551984.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:05.182Z,1520551985.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:05.569Z,1520551985.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:05.982Z,1520551985.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:06.377Z,1520551986.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:06.779Z,1520551986.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:07.187Z,1520551987.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:07.586Z,1520551987.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:07.961Z,1520551987.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:08.385Z,1520551988.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:08.786Z,1520551988.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:09.178Z,1520551989.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:09.581Z,1520551989.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:09.981Z,1520551989.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:10.380Z,1520551990.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:10.775Z,1520551990.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:11.177Z,1520551991.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:11.582Z,1520551991.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:11.963Z,1520551991.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:12.371Z,1520551992.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:12.762Z,1520551992.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:13.176Z,1520551993.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:13.572Z,1520551993.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:13.970Z,1520551993.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:14.371Z,1520551994.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:14.767Z,1520551994.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:15.185Z,1520551995.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:15.566Z,1520551995.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:15.975Z,1520551995.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:16.381Z,1520551996.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:16.769Z,1520551996.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:17.178Z,1520551997.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:17.582Z,1520551997.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:17.974Z,1520551997.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:18.378Z,1520551998.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:18.780Z,1520551998.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:19.178Z,1520551999.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:19.577Z,1520551999.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:19.979Z,1520551999.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:20.382Z,1520552000.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:20.762Z,1520552000.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:21.177Z,1520552001.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:21.568Z,1520552001.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:21.989Z,1520552001.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:22.386Z,1520552002.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:22.767Z,1520552002.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:23.179Z,1520552003.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:23.577Z,1520552003.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:23.962Z,1520552003.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:24.377Z,1520552004.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:24.771Z,1520552004.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:25.177Z,1520552005.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:25.581Z,1520552005.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:25.980Z,1520552005.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:26.379Z,1520552006.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:26.775Z,1520552006.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:27.185Z,1520552007.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:27.576Z,1520552007.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:27.976Z,1520552007.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:28.376Z,1520552008.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:28.780Z,1520552008.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:29.181Z,1520552009.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:29.581Z,1520552009.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:29.975Z,1520552009.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:30.362Z,1520552010.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:30.777Z,1520552010.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:31.178Z,1520552011.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:31.567Z,1520552011.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:31.979Z,1520552011.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:32.381Z,1520552012.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:32.777Z,1520552012.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:33.171Z,1520552013.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:33.575Z,1520552013.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:33.981Z,1520552013.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:34.380Z,1520552014.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:34.773Z,1520552014.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:35.176Z,1520552015.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:35.572Z,1520552015.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:35.979Z,1520552015.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:36.379Z,1520552016.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:36.780Z,1520552016.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:37.182Z,1520552017.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:37.583Z,1520552017.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:37.980Z,1520552017.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:38.380Z,1520552018.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:38.781Z,1520552018.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:39.181Z,1520552019.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:39.569Z,1520552019.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:39.975Z,1520552019.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:40.377Z,1520552020.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:40.777Z,1520552020.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:41.187Z,1520552021.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:41.562Z,1520552021.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:41.979Z,1520552021.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:42.386Z,1520552022.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:42.775Z,1520552022.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:43.163Z,1520552023.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:43.588Z,1520552023.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:43.983Z,1520552023.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:44.371Z,1520552024.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:44.778Z,1520552024.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:45.179Z,1520552025.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:45.575Z,1520552025.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:45.974Z,1520552025.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:46.377Z,1520552026.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:46.775Z,1520552026.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:47.194Z,1520552027.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:47.564Z,1520552027.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:47.963Z,1520552027.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:48.398Z,1520552028.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:48.772Z,1520552028.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:49.176Z,1520552029.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:49.562Z,1520552029.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:49.973Z,1520552029.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:50.374Z,1520552030.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:50.771Z,1520552030.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:51.178Z,1520552031.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:51.573Z,1520552031.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:51.982Z,1520552031.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:52.378Z,1520552032.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:52.759Z,1520552032.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:53.178Z,1520552033.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:53.572Z,1520552033.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:53.974Z,1520552033.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:54.375Z,1520552034.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:54.782Z,1520552034.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:55.183Z,1520552035.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:55.584Z,1520552035.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:55.988Z,1520552035.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:56.383Z,1520552036.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:33:56.782Z,1520552036.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:34:00.042Z,1520552040.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:34:00.162Z,1520552040.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:34:00.556Z,1520552040.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:34:00.961Z,1520552040.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:34:01.352Z,1520552041.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:34:01.761Z,1520552041.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:34:02.159Z,1520552042.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:34:02.556Z,1520552042.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:34:02.959Z,1520552042.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:34:03.358Z,1520552043.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:34:03.759Z,1520552043.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:34:04.164Z,1520552044.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:34:56.156Z,1520552096.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:34:56.552Z,1520552096.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:34:56.950Z,1520552096.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:00.239Z,1520552100.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:00.347Z,1520552100.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:00.710Z,1520552100.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:01.103Z,1520552101.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:01.506Z,1520552101.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:01.902Z,1520552101.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:02.306Z,1520552102.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:02.698Z,1520552102.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:03.102Z,1520552103.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:03.499Z,1520552103.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:03.906Z,1520552103.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:04.321Z,1520552104.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:04.699Z,1520552104.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:05.102Z,1520552105.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:05.502Z,1520552105.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:05.899Z,1520552105.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:06.311Z,1520552106.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:06.706Z,1520552106.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:07.105Z,1520552107.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:07.505Z,1520552107.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:07.910Z,1520552107.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:08.305Z,1520552108.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:08.714Z,1520552108.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:09.110Z,1520552109.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:09.499Z,1520552109.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:09.925Z,1520552109.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:10.302Z,1520552110.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:10.703Z,1520552110.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:11.102Z,1520552111.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:11.501Z,1520552111.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:11.899Z,1520552111.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:12.314Z,1520552112.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:12.707Z,1520552112.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:12.731Z,1520552112.731 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:35:12.731Z,1520552112.731 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-08T23:35:12.731Z,1520552112.731 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T23:35:12.777Z,1520552112.777 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T23:35:13.101Z,1520552113.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:13.177Z,1520552113.177 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T23:35:13.177Z,1520552113.177 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-08T23:35:13.514Z,1520552113.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:13.532Z,1520552113.532 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T23:35:13.532Z,1520552113.532 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T23:35:13.533Z,1520552113.533 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T23:35:13.902Z,1520552113.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:14.298Z,1520552114.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:14.702Z,1520552114.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:15.110Z,1520552115.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:15.503Z,1520552115.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:15.910Z,1520552115.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:16.307Z,1520552116.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:16.708Z,1520552116.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:17.106Z,1520552117.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:17.520Z,1520552117.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:17.897Z,1520552117.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:18.305Z,1520552118.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:18.721Z,1520552118.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:19.099Z,1520552119.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:19.502Z,1520552119.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:19.922Z,1520552119.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:20.298Z,1520552120.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:20.706Z,1520552120.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:21.102Z,1520552121.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:21.498Z,1520552121.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:21.906Z,1520552121.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:22.306Z,1520552122.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:22.702Z,1520552122.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:23.107Z,1520552123.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:23.518Z,1520552123.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:23.910Z,1520552123.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:24.309Z,1520552124.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:24.719Z,1520552124.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:25.114Z,1520552125.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:25.502Z,1520552125.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:25.922Z,1520552125.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:26.301Z,1520552126.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:26.706Z,1520552126.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:27.102Z,1520552127.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:27.498Z,1520552127.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:27.900Z,1520552127.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:28.306Z,1520552128.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:28.702Z,1520552128.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:29.098Z,1520552129.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:29.503Z,1520552129.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:29.902Z,1520552129.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:30.308Z,1520552130.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:30.714Z,1520552130.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:31.109Z,1520552131.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:31.504Z,1520552131.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:31.909Z,1520552131.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:32.309Z,1520552132.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:32.698Z,1520552132.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:33.102Z,1520552133.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:33.505Z,1520552133.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:33.899Z,1520552133.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:34.306Z,1520552134.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:34.706Z,1520552134.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:35.102Z,1520552135.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:35.514Z,1520552135.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:35.910Z,1520552135.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:36.312Z,1520552136.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:36.708Z,1520552136.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:37.109Z,1520552137.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:37.510Z,1520552137.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:37.910Z,1520552137.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:38.302Z,1520552138.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:38.698Z,1520552138.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:39.102Z,1520552139.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:39.507Z,1520552139.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:39.902Z,1520552139.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:40.318Z,1520552140.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:40.710Z,1520552140.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:41.105Z,1520552141.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:41.506Z,1520552141.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:41.912Z,1520552141.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:42.310Z,1520552142.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:42.709Z,1520552142.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:43.113Z,1520552143.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:43.497Z,1520552143.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:43.935Z,1520552143.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:44.306Z,1520552144.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:44.709Z,1520552144.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:45.125Z,1520552145.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:45.509Z,1520552145.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:45.909Z,1520552145.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:46.304Z,1520552146.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:46.703Z,1520552146.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:47.099Z,1520552147.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:47.504Z,1520552147.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:47.902Z,1520552147.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:48.310Z,1520552148.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:48.708Z,1520552148.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:49.107Z,1520552149.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:49.505Z,1520552149.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:49.909Z,1520552149.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:50.305Z,1520552150.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:50.709Z,1520552150.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:51.111Z,1520552151.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:51.510Z,1520552151.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:51.898Z,1520552151.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:52.302Z,1520552152.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:52.702Z,1520552152.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:53.102Z,1520552153.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:53.506Z,1520552153.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:53.902Z,1520552153.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:54.298Z,1520552154.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:54.706Z,1520552154.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:55.102Z,1520552155.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:55.499Z,1520552155.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:55.903Z,1520552155.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:56.306Z,1520552156.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:56.708Z,1520552156.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:35:57.118Z,1520552157.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:00.491Z,1520552160.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:00.615Z,1520552160.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:00.967Z,1520552160.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:01.368Z,1520552161.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:01.765Z,1520552161.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:02.168Z,1520552162.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:08.570Z,1520552168.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:08.970Z,1520552168.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:09.370Z,1520552169.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:09.770Z,1520552169.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:10.170Z,1520552170.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:10.578Z,1520552170.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:10.970Z,1520552170.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:11.374Z,1520552171.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:11.770Z,1520552171.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:12.157Z,1520552172.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:12.558Z,1520552172.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:12.981Z,1520552172.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:13.369Z,1520552173.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:13.759Z,1520552173.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:14.181Z,1520552174.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:14.573Z,1520552174.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:14.959Z,1520552174.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:15.378Z,1520552175.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:15.758Z,1520552175.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:16.158Z,1520552176.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:16.574Z,1520552176.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:16.957Z,1520552176.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:17.358Z,1520552177.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:17.781Z,1520552177.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:18.158Z,1520552178.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:18.570Z,1520552178.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:18.981Z,1520552178.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:19.358Z,1520552179.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:19.759Z,1520552179.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:20.182Z,1520552180.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:20.558Z,1520552180.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:20.983Z,1520552180.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:21.365Z,1520552181.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:21.769Z,1520552181.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:22.171Z,1520552182.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:22.578Z,1520552182.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:22.970Z,1520552182.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:23.358Z,1520552183.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:23.770Z,1520552183.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:24.157Z,1520552184.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:24.594Z,1520552184.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:24.971Z,1520552184.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:25.370Z,1520552185.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:25.770Z,1520552185.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:26.165Z,1520552186.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:26.570Z,1520552186.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:26.960Z,1520552186.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:27.374Z,1520552187.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:27.757Z,1520552187.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:28.162Z,1520552188.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:28.562Z,1520552188.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:28.965Z,1520552188.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:29.366Z,1520552189.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:29.762Z,1520552189.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:30.162Z,1520552190.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:30.555Z,1520552190.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:30.962Z,1520552190.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:31.362Z,1520552191.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:31.759Z,1520552191.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:32.162Z,1520552192.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:32.564Z,1520552192.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:32.966Z,1520552192.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:33.371Z,1520552193.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:33.769Z,1520552193.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:34.171Z,1520552194.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:34.575Z,1520552194.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:34.965Z,1520552194.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:35.372Z,1520552195.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:35.770Z,1520552195.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:36.165Z,1520552196.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:36.567Z,1520552196.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:36.969Z,1520552196.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:37.369Z,1520552197.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:37.766Z,1520552197.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:38.179Z,1520552198.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:38.565Z,1520552198.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:38.970Z,1520552198.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:39.379Z,1520552199.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:39.773Z,1520552199.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:40.167Z,1520552200.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:40.579Z,1520552200.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:40.973Z,1520552200.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:41.366Z,1520552201.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:41.769Z,1520552201.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:42.170Z,1520552202.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:42.568Z,1520552202.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:42.979Z,1520552202.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:43.374Z,1520552203.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:43.760Z,1520552203.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:44.158Z,1520552204.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:44.566Z,1520552204.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:44.962Z,1520552204.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:45.361Z,1520552205.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:45.762Z,1520552205.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:46.166Z,1520552206.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:46.579Z,1520552206.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:46.962Z,1520552206.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:47.358Z,1520552207.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:47.761Z,1520552207.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:48.157Z,1520552208.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:48.559Z,1520552208.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:48.969Z,1520552208.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:49.365Z,1520552209.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:49.759Z,1520552209.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:50.162Z,1520552210.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:50.566Z,1520552210.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:50.959Z,1520552210.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:51.366Z,1520552211.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:51.774Z,1520552211.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:52.166Z,1520552212.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:52.574Z,1520552212.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:52.978Z,1520552212.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:53.367Z,1520552213.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:53.769Z,1520552213.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:54.169Z,1520552214.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:54.567Z,1520552214.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:54.969Z,1520552214.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:55.373Z,1520552215.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:55.767Z,1520552215.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:56.169Z,1520552216.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:56.195Z,1520552216.195 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T23:36:56.195Z,1520552216.195 [Default:CheckIn:C.Wait] Stopped
2018-03-08T23:36:56.195Z,1520552216.195 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T23:36:56.196Z,1520552216.196 [Default:CheckIn:D] Running Loop=1
2018-03-08T23:36:56.573Z,1520552216.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:56.594Z,1520552216.594 [Default:CheckIn:D] Stopped
2018-03-08T23:36:56.594Z,1520552216.594 [Default:CheckIn:E] Running Loop=1
2018-03-08T23:36:56.969Z,1520552216.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:36:56.990Z,1520552216.990 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 951.196484 min 
2018-03-08T23:36:56.990Z,1520552216.990 [Default:CheckIn:E] Stopped
2018-03-08T23:36:56.990Z,1520552216.990 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T23:36:56.990Z,1520552216.990 [Default:CheckIn] Stopped
2018-03-08T23:36:56.991Z,1520552216.991 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T23:36:56.991Z,1520552216.991 [Default:CheckIn](INFO): Running loop #94
2018-03-08T23:36:56.991Z,1520552216.991 [Default:CheckIn] Running Loop=94
2018-03-08T23:36:56.991Z,1520552216.991 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T23:36:56.991Z,1520552216.991 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T23:36:57.369Z,1520552217.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:00.684Z,1520552220.684 [NAL9602](INFO): Powering up
2018-03-08T23:37:00.701Z,1520552220.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:00.832Z,1520552220.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:01.226Z,1520552221.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:01.610Z,1520552221.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:02.014Z,1520552222.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:02.410Z,1520552222.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:02.809Z,1520552222.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:03.210Z,1520552223.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:03.617Z,1520552223.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:04.018Z,1520552224.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:04.414Z,1520552224.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:04.810Z,1520552224.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:05.217Z,1520552225.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:05.618Z,1520552225.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:06.017Z,1520552226.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:06.417Z,1520552226.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:06.810Z,1520552226.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:07.221Z,1520552227.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:07.620Z,1520552227.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:08.014Z,1520552228.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:08.419Z,1520552228.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:08.821Z,1520552228.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:09.210Z,1520552229.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:09.625Z,1520552229.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:10.014Z,1520552230.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:10.414Z,1520552230.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:10.810Z,1520552230.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:11.229Z,1520552231.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:11.594Z,1520552231.594 [NAL9602](INFO): NAL9602 initialized
2018-03-08T23:37:11.609Z,1520552231.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:12.010Z,1520552232.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:12.421Z,1520552232.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:12.829Z,1520552232.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:13.225Z,1520552233.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:13.618Z,1520552233.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:14.011Z,1520552234.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:14.422Z,1520552234.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:14.816Z,1520552234.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:15.233Z,1520552235.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:15.621Z,1520552235.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:16.010Z,1520552236.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:16.409Z,1520552236.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:16.829Z,1520552236.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:17.210Z,1520552237.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:17.608Z,1520552237.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:18.025Z,1520552238.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:18.410Z,1520552238.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:18.806Z,1520552238.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:19.224Z,1520552239.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:19.621Z,1520552239.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:20.008Z,1520552240.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:20.419Z,1520552240.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:20.821Z,1520552240.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:21.218Z,1520552241.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:21.615Z,1520552241.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:22.025Z,1520552242.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:22.429Z,1520552242.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:22.826Z,1520552242.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:23.210Z,1520552243.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:23.610Z,1520552243.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:24.026Z,1520552244.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:24.410Z,1520552244.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:24.808Z,1520552244.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:25.218Z,1520552245.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:25.614Z,1520552245.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:26.018Z,1520552246.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:26.433Z,1520552246.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:26.826Z,1520552246.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:27.224Z,1520552247.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:27.619Z,1520552247.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:28.016Z,1520552248.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:28.410Z,1520552248.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:28.829Z,1520552248.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:29.210Z,1520552249.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:29.611Z,1520552249.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:30.019Z,1520552250.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:30.425Z,1520552250.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:30.824Z,1520552250.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:31.219Z,1520552251.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:31.613Z,1520552251.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:32.014Z,1520552252.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:32.419Z,1520552252.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:32.811Z,1520552252.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:33.211Z,1520552253.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:33.615Z,1520552253.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:34.013Z,1520552254.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:34.420Z,1520552254.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:34.819Z,1520552254.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:35.218Z,1520552255.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:35.614Z,1520552255.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:36.018Z,1520552256.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:36.419Z,1520552256.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:36.812Z,1520552256.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:37.213Z,1520552257.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:37.622Z,1520552257.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:38.010Z,1520552258.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:38.430Z,1520552258.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:38.810Z,1520552258.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:39.212Z,1520552259.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:39.610Z,1520552259.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:40.013Z,1520552260.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:40.418Z,1520552260.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:40.815Z,1520552260.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:41.218Z,1520552261.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:41.621Z,1520552261.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:42.021Z,1520552262.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:42.420Z,1520552262.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:42.820Z,1520552262.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:43.219Z,1520552263.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:43.609Z,1520552263.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:44.035Z,1520552264.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:44.426Z,1520552264.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:44.820Z,1520552264.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:45.221Z,1520552265.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:45.610Z,1520552265.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:46.033Z,1520552266.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:46.409Z,1520552266.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:46.829Z,1520552266.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:47.210Z,1520552267.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:47.614Z,1520552267.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:48.010Z,1520552268.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:48.410Z,1520552268.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:48.814Z,1520552268.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:49.219Z,1520552269.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:49.618Z,1520552269.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:50.017Z,1520552270.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:50.427Z,1520552270.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:50.791Z,1520552270.791 [NAL9602](INFO): SBD MO Status=0, MOMSN=4899, MT Status=0, MTMSN=0
2018-03-08T23:37:50.791Z,1520552270.791 [NAL9602](INFO): No messages in MT queue
2018-03-08T23:37:50.808Z,1520552270.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:51.221Z,1520552271.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:51.628Z,1520552271.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:52.033Z,1520552272.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:52.421Z,1520552272.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:52.811Z,1520552272.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:53.210Z,1520552273.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:53.612Z,1520552273.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:54.010Z,1520552274.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:54.425Z,1520552274.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:54.840Z,1520552274.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:55.229Z,1520552275.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:55.611Z,1520552275.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:56.029Z,1520552276.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:56.426Z,1520552276.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:56.811Z,1520552276.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:57.210Z,1520552277.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:57.622Z,1520552277.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:37:58.034Z,1520552278.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:01.249Z,1520552281.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:01.372Z,1520552281.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:01.755Z,1520552281.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:02.151Z,1520552282.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:02.559Z,1520552282.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:02.953Z,1520552282.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:03.338Z,1520552283.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:03.768Z,1520552283.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:04.166Z,1520552284.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:04.561Z,1520552284.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:04.963Z,1520552284.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:05.338Z,1520552285.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:05.744Z,1520552285.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:06.142Z,1520552286.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:06.561Z,1520552286.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:06.965Z,1520552286.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:07.361Z,1520552287.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:07.738Z,1520552287.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:08.146Z,1520552288.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:08.542Z,1520552288.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:08.940Z,1520552288.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:09.341Z,1520552289.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:09.765Z,1520552289.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:10.161Z,1520552290.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:10.561Z,1520552290.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:10.945Z,1520552290.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:11.342Z,1520552291.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:11.744Z,1520552291.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:12.142Z,1520552292.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:12.566Z,1520552292.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:12.973Z,1520552292.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:13.359Z,1520552293.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:13.742Z,1520552293.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:13.773Z,1520552293.773 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:38:13.773Z,1520552293.773 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-03-08T23:38:13.773Z,1520552293.773 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T23:38:13.787Z,1520552293.787 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T23:38:14.162Z,1520552294.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:14.198Z,1520552294.198 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T23:38:14.198Z,1520552294.198 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-03-08T23:38:14.543Z,1520552294.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:14.578Z,1520552294.578 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T23:38:14.578Z,1520552294.578 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T23:38:14.578Z,1520552294.578 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T23:38:14.944Z,1520552294.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:15.346Z,1520552295.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:15.775Z,1520552295.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:16.169Z,1520552296.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:16.561Z,1520552296.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:16.942Z,1520552296.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:17.342Z,1520552297.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:17.744Z,1520552297.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:18.142Z,1520552298.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:18.561Z,1520552298.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:18.971Z,1520552298.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:19.375Z,1520552299.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:19.749Z,1520552299.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:20.148Z,1520552300.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:20.547Z,1520552300.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:20.950Z,1520552300.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:21.348Z,1520552301.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:21.765Z,1520552301.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:22.160Z,1520552302.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:22.558Z,1520552302.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:22.950Z,1520552302.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:23.355Z,1520552303.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:23.760Z,1520552303.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:24.162Z,1520552304.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:24.562Z,1520552304.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:24.958Z,1520552304.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:25.368Z,1520552305.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:25.742Z,1520552305.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:26.139Z,1520552306.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:26.542Z,1520552306.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:26.956Z,1520552306.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:27.338Z,1520552307.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:27.761Z,1520552307.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:28.166Z,1520552308.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:28.560Z,1520552308.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:28.942Z,1520552308.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:29.345Z,1520552309.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:29.740Z,1520552309.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:30.146Z,1520552310.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:30.558Z,1520552310.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:30.962Z,1520552310.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:31.359Z,1520552311.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:31.742Z,1520552311.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:32.143Z,1520552312.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:32.542Z,1520552312.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:32.945Z,1520552312.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:33.346Z,1520552313.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:33.757Z,1520552313.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:34.166Z,1520552314.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:34.561Z,1520552314.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:34.942Z,1520552314.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:35.345Z,1520552315.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:35.748Z,1520552315.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:36.143Z,1520552316.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:36.557Z,1520552316.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:36.971Z,1520552316.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:37.357Z,1520552317.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:37.747Z,1520552317.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:38.140Z,1520552318.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:38.553Z,1520552318.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:38.952Z,1520552318.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:39.347Z,1520552319.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:39.770Z,1520552319.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:40.157Z,1520552320.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:40.565Z,1520552320.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:40.953Z,1520552320.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:41.350Z,1520552321.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:41.755Z,1520552321.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:42.144Z,1520552322.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:42.565Z,1520552322.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:42.960Z,1520552322.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:43.361Z,1520552323.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:43.742Z,1520552323.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:44.138Z,1520552324.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:44.563Z,1520552324.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:44.944Z,1520552324.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:45.354Z,1520552325.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:45.768Z,1520552325.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:46.165Z,1520552326.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:46.559Z,1520552326.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:46.942Z,1520552326.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:47.343Z,1520552327.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:47.748Z,1520552327.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:48.142Z,1520552328.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:48.561Z,1520552328.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:48.960Z,1520552328.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:49.359Z,1520552329.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:49.746Z,1520552329.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:50.138Z,1520552330.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:50.542Z,1520552330.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:51.015Z,1520552331.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:51.346Z,1520552331.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:51.773Z,1520552331.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:52.157Z,1520552332.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:52.556Z,1520552332.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:52.953Z,1520552332.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:53.351Z,1520552333.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:53.756Z,1520552333.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:54.150Z,1520552334.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:54.560Z,1520552334.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:54.964Z,1520552334.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:55.360Z,1520552335.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:55.742Z,1520552335.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:56.138Z,1520552336.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:56.542Z,1520552336.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:56.940Z,1520552336.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:57.337Z,1520552337.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:38:57.757Z,1520552337.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:01.033Z,1520552341.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:01.161Z,1520552341.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:01.534Z,1520552341.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:01.918Z,1520552341.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:02.318Z,1520552342.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:02.716Z,1520552342.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:03.118Z,1520552343.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:03.521Z,1520552343.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:03.959Z,1520552343.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:04.329Z,1520552344.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:04.720Z,1520552344.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:05.140Z,1520552345.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:05.523Z,1520552345.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:05.920Z,1520552345.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:06.330Z,1520552346.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:06.733Z,1520552346.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:07.125Z,1520552347.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:07.534Z,1520552347.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:07.923Z,1520552347.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:08.319Z,1520552348.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:08.720Z,1520552348.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:09.126Z,1520552349.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:09.525Z,1520552349.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:09.936Z,1520552349.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:10.337Z,1520552350.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:10.714Z,1520552350.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:11.114Z,1520552351.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:11.514Z,1520552351.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:11.916Z,1520552351.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:12.314Z,1520552352.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:12.738Z,1520552352.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:13.138Z,1520552353.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:13.542Z,1520552353.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:13.919Z,1520552353.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:14.324Z,1520552354.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:14.724Z,1520552354.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:15.124Z,1520552355.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:15.526Z,1520552355.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:15.933Z,1520552355.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:16.327Z,1520552356.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:16.718Z,1520552356.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:17.131Z,1520552357.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:17.514Z,1520552357.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:17.920Z,1520552357.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:18.333Z,1520552358.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:18.734Z,1520552358.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:19.138Z,1520552359.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:19.533Z,1520552359.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:19.919Z,1520552359.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:20.319Z,1520552360.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:20.716Z,1520552360.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:21.110Z,1520552361.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:21.521Z,1520552361.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:21.949Z,1520552361.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:22.335Z,1520552362.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:22.720Z,1520552362.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:23.120Z,1520552363.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:23.515Z,1520552363.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:23.917Z,1520552363.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:24.330Z,1520552364.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:24.737Z,1520552364.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:25.129Z,1520552365.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:25.528Z,1520552365.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:25.923Z,1520552365.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:26.327Z,1520552366.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:26.734Z,1520552366.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:27.123Z,1520552367.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:27.528Z,1520552367.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:27.938Z,1520552367.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:28.329Z,1520552368.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:28.712Z,1520552368.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:29.114Z,1520552369.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:29.515Z,1520552369.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:29.924Z,1520552369.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:30.319Z,1520552370.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:30.725Z,1520552370.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:31.129Z,1520552371.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:31.538Z,1520552371.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:31.922Z,1520552371.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:32.316Z,1520552372.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:32.741Z,1520552372.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:33.122Z,1520552373.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:33.528Z,1520552373.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:33.945Z,1520552373.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:34.334Z,1520552374.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:34.710Z,1520552374.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:35.118Z,1520552375.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:35.518Z,1520552375.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:35.916Z,1520552375.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:36.319Z,1520552376.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:36.733Z,1520552376.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:37.133Z,1520552377.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:37.533Z,1520552377.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:37.914Z,1520552377.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:38.319Z,1520552378.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:38.715Z,1520552378.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:39.135Z,1520552379.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:39.529Z,1520552379.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:39.937Z,1520552379.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:40.325Z,1520552380.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:40.718Z,1520552380.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:41.113Z,1520552381.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:41.526Z,1520552381.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:41.917Z,1520552381.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:42.321Z,1520552382.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:42.740Z,1520552382.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:43.132Z,1520552383.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:43.532Z,1520552383.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:43.917Z,1520552383.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:44.314Z,1520552384.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:44.716Z,1520552384.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:45.116Z,1520552385.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:45.531Z,1520552385.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:45.911Z,1520552385.911 [NAL9602](INFO): GPS fix at 20180308T233905: (21.316524, -157.875674)
2018-03-08T23:39:45.927Z,1520552385.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:45.978Z,1520552385.978 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T23:39:45.978Z,1520552385.978 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T23:39:46.341Z,1520552386.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:46.822Z,1520552386.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:47.117Z,1520552387.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:51.531Z,1520552391.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:51.685Z,1520552391.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:52.053Z,1520552392.053 [DataOverHttps](INFO): Sending 63 bytes from file Logs/20180308T074127/Courier0376.lzma
2018-03-08T23:39:52.098Z,1520552392.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:52.479Z,1520552392.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:52.852Z,1520552392.852 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0376.lzma.bak
2018-03-08T23:39:52.852Z,1520552392.852 [DataOverHttps](INFO): SBD MOMSN=7990153
2018-03-08T23:39:52.876Z,1520552392.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:53.676Z,1520552393.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:53.846Z,1520552393.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:54.214Z,1520552394.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:59.042Z,1520552399.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:59.159Z,1520552399.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:59.538Z,1520552399.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:39:59.959Z,1520552399.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:00.330Z,1520552400.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:00.745Z,1520552400.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:01.126Z,1520552401.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:04.360Z,1520552404.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:04.483Z,1520552404.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:04.834Z,1520552404.834 [DataOverHttps](INFO): Sending 133 bytes from file Logs/20180308T074127/Express0377.lzma
2018-03-08T23:40:04.868Z,1520552404.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:05.262Z,1520552405.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:05.632Z,1520552405.632 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0377.lzma.bak
2018-03-08T23:40:05.632Z,1520552405.632 [DataOverHttps](INFO): SBD MOMSN=7990161
2018-03-08T23:40:05.679Z,1520552405.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:06.238Z,1520552406.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:06.281Z,1520552406.281 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T23:40:06.281Z,1520552406.281 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T23:40:06.281Z,1520552406.281 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T23:40:06.450Z,1520552406.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:09.793Z,1520552409.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:09.905Z,1520552409.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:10.294Z,1520552410.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:10.690Z,1520552410.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:11.085Z,1520552411.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:11.486Z,1520552411.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:11.905Z,1520552411.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:12.291Z,1520552412.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:12.695Z,1520552412.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:13.089Z,1520552413.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:13.485Z,1520552413.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:13.899Z,1520552413.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:14.293Z,1520552414.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:14.682Z,1520552414.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:15.101Z,1520552415.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:15.494Z,1520552415.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:15.882Z,1520552415.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:16.283Z,1520552416.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:16.682Z,1520552416.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:17.078Z,1520552417.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:17.482Z,1520552417.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:17.886Z,1520552417.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:18.282Z,1520552418.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:18.686Z,1520552418.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:19.086Z,1520552419.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:19.482Z,1520552419.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:19.886Z,1520552419.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:20.290Z,1520552420.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:20.688Z,1520552420.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:21.089Z,1520552421.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:21.489Z,1520552421.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:21.865Z,1520552421.865 [NAL9602](INFO): Powering down
2018-03-08T23:40:21.905Z,1520552421.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:22.288Z,1520552422.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:22.690Z,1520552422.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:23.092Z,1520552423.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:23.502Z,1520552423.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:23.885Z,1520552423.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:24.294Z,1520552424.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:24.703Z,1520552424.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:25.079Z,1520552425.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:25.498Z,1520552425.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:25.882Z,1520552425.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:26.278Z,1520552426.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:26.682Z,1520552426.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:27.096Z,1520552427.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:27.482Z,1520552427.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:27.878Z,1520552427.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:28.281Z,1520552428.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:28.678Z,1520552428.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:29.078Z,1520552429.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:29.481Z,1520552429.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:29.882Z,1520552429.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:30.282Z,1520552430.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:30.689Z,1520552430.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:31.077Z,1520552431.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:31.490Z,1520552431.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:31.887Z,1520552431.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:32.286Z,1520552432.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:32.689Z,1520552432.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:33.090Z,1520552433.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:33.494Z,1520552433.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:33.885Z,1520552433.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:34.301Z,1520552434.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:34.679Z,1520552434.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:35.090Z,1520552435.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:35.502Z,1520552435.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:35.879Z,1520552435.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:36.282Z,1520552436.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:36.701Z,1520552436.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:37.077Z,1520552437.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:37.482Z,1520552437.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:37.882Z,1520552437.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:38.287Z,1520552438.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:38.686Z,1520552438.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:39.088Z,1520552439.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:39.486Z,1520552439.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:39.888Z,1520552439.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:40.289Z,1520552440.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:40.689Z,1520552440.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:41.089Z,1520552441.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:41.489Z,1520552441.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:41.889Z,1520552441.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:42.291Z,1520552442.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:42.690Z,1520552442.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:43.078Z,1520552443.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:43.490Z,1520552443.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:43.889Z,1520552443.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:44.278Z,1520552444.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:44.693Z,1520552444.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:45.090Z,1520552445.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:45.475Z,1520552445.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:45.893Z,1520552445.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:46.301Z,1520552446.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:46.678Z,1520552446.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:47.089Z,1520552447.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:47.489Z,1520552447.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:47.881Z,1520552447.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:48.293Z,1520552448.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:48.702Z,1520552448.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:49.080Z,1520552449.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:49.482Z,1520552449.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:49.901Z,1520552449.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:50.282Z,1520552450.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:50.682Z,1520552450.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:51.103Z,1520552451.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:51.475Z,1520552451.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:51.882Z,1520552451.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:52.302Z,1520552452.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:52.678Z,1520552452.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:53.082Z,1520552453.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:53.482Z,1520552453.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:53.880Z,1520552453.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:54.290Z,1520552454.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:54.691Z,1520552454.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:55.086Z,1520552455.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:55.498Z,1520552455.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:55.889Z,1520552455.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:56.288Z,1520552456.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:56.690Z,1520552456.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:57.099Z,1520552457.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:57.487Z,1520552457.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:57.890Z,1520552457.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:58.284Z,1520552458.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:58.679Z,1520552458.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:59.085Z,1520552459.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:59.482Z,1520552459.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:40:59.881Z,1520552459.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:00.294Z,1520552460.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:00.682Z,1520552460.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:01.078Z,1520552461.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:01.482Z,1520552461.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:01.882Z,1520552461.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:02.281Z,1520552462.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:02.683Z,1520552462.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:03.101Z,1520552463.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:03.482Z,1520552463.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:03.882Z,1520552463.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:04.282Z,1520552464.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:04.683Z,1520552464.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:05.095Z,1520552465.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:05.497Z,1520552465.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:05.884Z,1520552465.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:06.290Z,1520552466.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:06.690Z,1520552466.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:09.960Z,1520552469.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:10.099Z,1520552470.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:10.434Z,1520552470.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:10.824Z,1520552470.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:11.242Z,1520552471.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:11.626Z,1520552471.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:12.026Z,1520552472.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:12.430Z,1520552472.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:12.826Z,1520552472.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:13.222Z,1520552473.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:13.630Z,1520552473.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:14.026Z,1520552474.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:14.426Z,1520552474.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:14.830Z,1520552474.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:14.860Z,1520552474.860 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:41:14.860Z,1520552474.860 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-08T23:41:14.860Z,1520552474.860 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T23:41:14.875Z,1520552474.875 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T23:41:15.226Z,1520552475.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:15.313Z,1520552475.313 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T23:41:15.313Z,1520552475.313 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-08T23:41:15.630Z,1520552475.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:15.647Z,1520552475.647 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T23:41:15.647Z,1520552475.647 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T23:41:15.648Z,1520552475.648 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T23:41:16.038Z,1520552476.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:16.428Z,1520552476.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:16.833Z,1520552476.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:17.238Z,1520552477.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:17.626Z,1520552477.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:18.030Z,1520552478.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:18.431Z,1520552478.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:18.831Z,1520552478.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:19.234Z,1520552479.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:19.635Z,1520552479.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:20.031Z,1520552480.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:20.435Z,1520552480.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:20.832Z,1520552480.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:21.230Z,1520552481.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:21.622Z,1520552481.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:22.022Z,1520552482.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:22.430Z,1520552482.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:22.826Z,1520552482.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:23.222Z,1520552483.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:23.642Z,1520552483.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:24.033Z,1520552484.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:24.434Z,1520552484.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:24.827Z,1520552484.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:25.232Z,1520552485.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:25.634Z,1520552485.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:26.030Z,1520552486.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:26.430Z,1520552486.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:26.823Z,1520552486.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:27.230Z,1520552487.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:27.626Z,1520552487.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:28.023Z,1520552488.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:28.426Z,1520552488.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:28.830Z,1520552488.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:29.230Z,1520552489.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:29.630Z,1520552489.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:30.033Z,1520552490.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:30.433Z,1520552490.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:30.843Z,1520552490.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:31.233Z,1520552491.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:31.622Z,1520552491.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:32.030Z,1520552492.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:32.425Z,1520552492.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:32.830Z,1520552492.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:33.232Z,1520552493.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:33.637Z,1520552493.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:34.022Z,1520552494.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:34.429Z,1520552494.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:34.822Z,1520552494.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:35.234Z,1520552495.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:35.626Z,1520552495.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:36.029Z,1520552496.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:36.426Z,1520552496.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:36.834Z,1520552496.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:37.234Z,1520552497.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:37.631Z,1520552497.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:38.028Z,1520552498.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:38.426Z,1520552498.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:38.822Z,1520552498.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:39.226Z,1520552499.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:39.634Z,1520552499.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:40.023Z,1520552500.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:40.434Z,1520552500.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:40.829Z,1520552500.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:41.236Z,1520552501.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:41.638Z,1520552501.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:42.034Z,1520552502.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:42.422Z,1520552502.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:42.846Z,1520552502.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:43.227Z,1520552503.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:43.641Z,1520552503.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:44.035Z,1520552504.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:44.433Z,1520552504.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:44.826Z,1520552504.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:45.246Z,1520552505.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:45.627Z,1520552505.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:46.028Z,1520552506.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:46.434Z,1520552506.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:46.825Z,1520552506.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:47.228Z,1520552507.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:47.635Z,1520552507.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:48.032Z,1520552508.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:48.433Z,1520552508.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:48.833Z,1520552508.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:49.234Z,1520552509.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:49.633Z,1520552509.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:50.029Z,1520552510.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:50.437Z,1520552510.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:50.823Z,1520552510.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:51.226Z,1520552511.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:51.626Z,1520552511.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:52.030Z,1520552512.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:52.426Z,1520552512.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:52.826Z,1520552512.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:53.233Z,1520552513.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:53.632Z,1520552513.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:54.035Z,1520552514.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:54.435Z,1520552514.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:54.827Z,1520552514.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:55.234Z,1520552515.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:55.627Z,1520552515.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:56.031Z,1520552516.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:56.426Z,1520552516.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:56.827Z,1520552516.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:57.243Z,1520552517.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:57.633Z,1520552517.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:58.034Z,1520552518.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:58.433Z,1520552518.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:58.830Z,1520552518.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:59.238Z,1520552519.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:41:59.633Z,1520552519.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:00.025Z,1520552520.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:00.426Z,1520552520.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:00.830Z,1520552520.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:01.226Z,1520552521.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:01.627Z,1520552521.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:02.033Z,1520552522.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:02.433Z,1520552522.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:02.830Z,1520552522.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:03.234Z,1520552523.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:03.637Z,1520552523.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:04.030Z,1520552524.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:04.434Z,1520552524.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:04.833Z,1520552524.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:04.864Z,1520552524.864 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T23:42:05.233Z,1520552525.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:05.634Z,1520552525.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:06.025Z,1520552526.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:06.426Z,1520552526.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:06.826Z,1520552526.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:10.054Z,1520552530.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:10.167Z,1520552530.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:10.534Z,1520552530.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:10.928Z,1520552530.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:11.330Z,1520552531.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:11.726Z,1520552531.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:12.131Z,1520552532.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:12.523Z,1520552532.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:12.935Z,1520552532.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:13.346Z,1520552533.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:13.733Z,1520552533.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:14.130Z,1520552534.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:14.531Z,1520552534.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:14.932Z,1520552534.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:14.963Z,1520552534.963 [CBIT](INFO): Clearing failed state for component DropWeight
2018-03-08T23:42:14.963Z,1520552534.963 [DropWeight] No Fault, FailCount= 1
2018-03-08T23:42:15.339Z,1520552535.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:15.730Z,1520552535.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:16.127Z,1520552536.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:16.539Z,1520552536.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:16.934Z,1520552536.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:17.326Z,1520552537.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:17.731Z,1520552537.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:18.126Z,1520552538.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:18.526Z,1520552538.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:18.929Z,1520552538.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:19.317Z,1520552539.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:19.718Z,1520552539.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:20.123Z,1520552540.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:20.522Z,1520552540.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:20.919Z,1520552540.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:21.318Z,1520552541.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:21.725Z,1520552541.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:22.122Z,1520552542.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:22.532Z,1520552542.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:22.931Z,1520552542.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:23.332Z,1520552543.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:23.731Z,1520552543.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:24.129Z,1520552544.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:24.518Z,1520552544.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:24.926Z,1520552544.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:25.326Z,1520552545.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:25.719Z,1520552545.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:26.122Z,1520552546.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:26.526Z,1520552546.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:26.946Z,1520552546.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:27.327Z,1520552547.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:27.731Z,1520552547.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:28.131Z,1520552548.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:28.530Z,1520552548.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:28.926Z,1520552548.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:29.329Z,1520552549.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:29.722Z,1520552549.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:30.122Z,1520552550.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:30.519Z,1520552550.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:30.922Z,1520552550.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:31.326Z,1520552551.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:31.719Z,1520552551.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:32.123Z,1520552552.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:32.530Z,1520552552.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:32.923Z,1520552552.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:33.327Z,1520552553.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:33.729Z,1520552553.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:34.126Z,1520552554.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:34.541Z,1520552554.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:34.931Z,1520552554.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:35.318Z,1520552555.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:35.730Z,1520552555.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:36.132Z,1520552556.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:36.536Z,1520552556.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:36.927Z,1520552556.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:37.321Z,1520552557.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:37.730Z,1520552557.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:38.130Z,1520552558.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:38.534Z,1520552558.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:38.931Z,1520552558.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:39.331Z,1520552559.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:39.731Z,1520552559.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:40.130Z,1520552560.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:40.539Z,1520552560.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:40.936Z,1520552560.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:41.319Z,1520552561.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:41.732Z,1520552561.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:42.136Z,1520552562.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:42.526Z,1520552562.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:42.930Z,1520552562.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:43.335Z,1520552563.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:43.718Z,1520552563.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:44.126Z,1520552564.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:44.518Z,1520552564.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:44.922Z,1520552564.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:45.326Z,1520552565.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:45.718Z,1520552565.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:46.122Z,1520552566.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:46.527Z,1520552566.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:46.923Z,1520552566.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:47.327Z,1520552567.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:47.727Z,1520552567.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:48.127Z,1520552568.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:48.538Z,1520552568.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:48.928Z,1520552568.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:49.343Z,1520552569.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:49.734Z,1520552569.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:50.131Z,1520552570.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:50.531Z,1520552570.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:50.936Z,1520552570.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:51.332Z,1520552571.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:51.726Z,1520552571.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:52.118Z,1520552572.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:52.526Z,1520552572.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:52.919Z,1520552572.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:53.323Z,1520552573.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:53.722Z,1520552573.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:54.127Z,1520552574.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:54.527Z,1520552574.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:54.926Z,1520552574.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:55.339Z,1520552575.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:55.727Z,1520552575.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:56.130Z,1520552576.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:56.522Z,1520552576.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:56.926Z,1520552576.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:57.341Z,1520552577.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:57.720Z,1520552577.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:58.138Z,1520552578.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:58.522Z,1520552578.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:58.918Z,1520552578.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:59.326Z,1520552579.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:42:59.722Z,1520552579.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:00.115Z,1520552580.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:00.522Z,1520552580.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:00.923Z,1520552580.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:01.319Z,1520552581.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:01.726Z,1520552581.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:02.126Z,1520552582.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:02.523Z,1520552582.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:02.930Z,1520552582.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:03.341Z,1520552583.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:03.726Z,1520552583.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:04.127Z,1520552584.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:04.530Z,1520552584.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:04.930Z,1520552584.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:05.331Z,1520552585.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:05.735Z,1520552585.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:06.130Z,1520552586.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:06.528Z,1520552586.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:06.937Z,1520552586.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:10.053Z,1520552590.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:10.207Z,1520552590.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:10.605Z,1520552590.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:10.999Z,1520552590.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:11.410Z,1520552591.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:11.805Z,1520552591.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:12.199Z,1520552592.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:12.609Z,1520552592.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:13.003Z,1520552593.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:13.401Z,1520552593.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:13.803Z,1520552593.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:14.202Z,1520552594.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:14.599Z,1520552594.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:15.006Z,1520552595.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:15.401Z,1520552595.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:15.799Z,1520552595.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:16.197Z,1520552596.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:16.597Z,1520552596.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:17.002Z,1520552597.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:17.406Z,1520552597.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:17.803Z,1520552597.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:18.208Z,1520552598.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:18.607Z,1520552598.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:19.014Z,1520552599.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:19.390Z,1520552599.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:19.805Z,1520552599.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:20.214Z,1520552600.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:20.595Z,1520552600.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:21.005Z,1520552601.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:21.405Z,1520552601.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:21.790Z,1520552601.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:22.205Z,1520552602.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:22.605Z,1520552602.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:22.994Z,1520552602.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:23.407Z,1520552603.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:23.814Z,1520552603.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:24.197Z,1520552604.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:24.594Z,1520552604.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:25.015Z,1520552605.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:25.395Z,1520552605.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:25.794Z,1520552605.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:26.214Z,1520552606.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:26.594Z,1520552606.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:26.992Z,1520552606.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:27.395Z,1520552607.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:27.799Z,1520552607.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:28.189Z,1520552608.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:28.595Z,1520552608.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:28.994Z,1520552608.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:29.403Z,1520552609.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:29.808Z,1520552609.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:30.209Z,1520552610.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:30.594Z,1520552610.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:30.996Z,1520552610.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:31.396Z,1520552611.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:31.799Z,1520552611.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:32.200Z,1520552612.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:32.604Z,1520552612.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:32.988Z,1520552612.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:33.403Z,1520552613.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:33.802Z,1520552613.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:34.199Z,1520552614.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:34.602Z,1520552614.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:34.999Z,1520552614.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:35.397Z,1520552615.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:35.800Z,1520552615.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:36.208Z,1520552616.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:36.602Z,1520552616.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:36.997Z,1520552616.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:37.402Z,1520552617.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:37.791Z,1520552617.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:38.214Z,1520552618.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:38.594Z,1520552618.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:38.991Z,1520552618.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:39.394Z,1520552619.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:39.799Z,1520552619.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:40.188Z,1520552620.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:40.594Z,1520552620.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:41.029Z,1520552621.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:41.401Z,1520552621.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:41.826Z,1520552621.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:42.200Z,1520552622.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:42.603Z,1520552622.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:43.003Z,1520552623.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:43.402Z,1520552623.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:43.821Z,1520552623.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:44.205Z,1520552624.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:44.603Z,1520552624.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:45.003Z,1520552625.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:45.396Z,1520552625.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:45.794Z,1520552625.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:46.192Z,1520552626.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:46.594Z,1520552626.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:46.998Z,1520552626.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:47.391Z,1520552627.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:47.794Z,1520552627.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:48.198Z,1520552628.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:48.591Z,1520552628.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:48.999Z,1520552628.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:49.406Z,1520552629.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:49.795Z,1520552629.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:50.199Z,1520552630.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:50.601Z,1520552630.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:51.002Z,1520552631.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:51.403Z,1520552631.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:51.803Z,1520552631.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:52.201Z,1520552632.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:52.602Z,1520552632.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:53.002Z,1520552633.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:53.402Z,1520552633.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:53.802Z,1520552633.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:54.207Z,1520552634.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:54.599Z,1520552634.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:54.996Z,1520552634.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:55.406Z,1520552635.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:55.791Z,1520552635.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:56.207Z,1520552636.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:56.594Z,1520552636.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:56.991Z,1520552636.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:57.394Z,1520552637.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:57.794Z,1520552637.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:58.192Z,1520552638.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:58.594Z,1520552638.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:58.994Z,1520552638.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:59.391Z,1520552639.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:43:59.794Z,1520552639.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:00.194Z,1520552640.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:00.591Z,1520552640.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:00.995Z,1520552640.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:01.393Z,1520552641.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:01.799Z,1520552641.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:02.200Z,1520552642.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:02.601Z,1520552642.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:03.001Z,1520552643.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:03.398Z,1520552643.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:03.806Z,1520552643.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:04.201Z,1520552644.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:04.603Z,1520552644.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:05.003Z,1520552645.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:05.403Z,1520552645.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:05.802Z,1520552645.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:06.202Z,1520552646.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:06.600Z,1520552646.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:07.002Z,1520552647.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:10.157Z,1520552650.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:10.265Z,1520552650.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:10.664Z,1520552650.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:11.066Z,1520552651.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:11.467Z,1520552651.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:11.867Z,1520552651.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:12.262Z,1520552652.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:12.657Z,1520552652.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:13.062Z,1520552653.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:13.458Z,1520552653.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:13.860Z,1520552653.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:14.262Z,1520552654.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:14.655Z,1520552654.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:15.055Z,1520552655.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:15.462Z,1520552655.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:15.862Z,1520552655.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:15.881Z,1520552655.881 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:44:15.882Z,1520552655.882 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-08T23:44:15.882Z,1520552655.882 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T23:44:15.894Z,1520552655.894 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T23:44:16.263Z,1520552656.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:16.293Z,1520552656.293 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T23:44:16.293Z,1520552656.293 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-08T23:44:16.654Z,1520552656.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:16.691Z,1520552656.691 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T23:44:16.691Z,1520552656.691 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T23:44:16.692Z,1520552656.692 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T23:44:17.054Z,1520552657.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:17.451Z,1520552657.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:17.854Z,1520552657.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:18.258Z,1520552658.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:18.652Z,1520552658.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:19.054Z,1520552659.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:19.454Z,1520552659.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:19.851Z,1520552659.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:20.254Z,1520552660.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:20.654Z,1520552660.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:21.051Z,1520552661.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:21.454Z,1520552661.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:21.858Z,1520552661.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:22.258Z,1520552662.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:22.654Z,1520552662.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:23.054Z,1520552663.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:23.456Z,1520552663.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:23.854Z,1520552663.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:24.258Z,1520552664.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:24.650Z,1520552664.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:25.054Z,1520552665.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:25.456Z,1520552665.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:25.850Z,1520552665.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:26.250Z,1520552666.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:26.659Z,1520552666.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:27.050Z,1520552667.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:27.454Z,1520552667.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:27.854Z,1520552667.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:28.254Z,1520552668.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:28.658Z,1520552668.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:29.116Z,1520552669.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:29.451Z,1520552669.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:29.858Z,1520552669.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:30.263Z,1520552670.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:30.655Z,1520552670.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:31.058Z,1520552671.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:31.463Z,1520552671.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:31.861Z,1520552671.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:32.261Z,1520552672.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:32.663Z,1520552672.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:33.062Z,1520552673.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:33.461Z,1520552673.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:33.861Z,1520552673.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:34.261Z,1520552674.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:34.662Z,1520552674.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:35.060Z,1520552675.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:35.462Z,1520552675.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:35.862Z,1520552675.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:36.260Z,1520552676.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:36.648Z,1520552676.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:37.067Z,1520552677.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:37.465Z,1520552677.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:37.853Z,1520552677.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:38.253Z,1520552678.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:38.654Z,1520552678.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:39.050Z,1520552679.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:39.454Z,1520552679.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:39.858Z,1520552679.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:40.250Z,1520552680.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:40.654Z,1520552680.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:41.054Z,1520552681.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:41.450Z,1520552681.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:41.855Z,1520552681.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:42.258Z,1520552682.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:42.654Z,1520552682.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:43.058Z,1520552683.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:43.458Z,1520552683.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:43.853Z,1520552683.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:44.254Z,1520552684.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:44.662Z,1520552684.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:45.063Z,1520552685.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:45.464Z,1520552685.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:45.856Z,1520552685.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:46.266Z,1520552686.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:46.664Z,1520552686.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:47.061Z,1520552687.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:47.463Z,1520552687.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:47.873Z,1520552687.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:48.263Z,1520552688.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:48.662Z,1520552688.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:49.062Z,1520552689.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:49.462Z,1520552689.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:49.863Z,1520552689.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:50.262Z,1520552690.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:50.650Z,1520552690.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:51.062Z,1520552691.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:51.470Z,1520552691.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:51.850Z,1520552691.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:52.263Z,1520552692.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:52.670Z,1520552692.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:53.063Z,1520552693.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:53.464Z,1520552693.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:53.863Z,1520552693.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:54.267Z,1520552694.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:54.664Z,1520552694.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:55.063Z,1520552695.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:55.462Z,1520552695.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:55.861Z,1520552695.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:56.266Z,1520552696.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:56.651Z,1520552696.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:57.062Z,1520552697.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:57.462Z,1520552697.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:57.851Z,1520552697.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:58.251Z,1520552698.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:58.658Z,1520552698.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:59.050Z,1520552699.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:59.454Z,1520552699.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:44:59.860Z,1520552699.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:00.259Z,1520552700.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:00.659Z,1520552700.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:01.066Z,1520552701.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:01.459Z,1520552701.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:01.862Z,1520552701.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:02.262Z,1520552702.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:02.655Z,1520552702.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:03.063Z,1520552703.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:03.462Z,1520552703.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:03.859Z,1520552703.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:04.265Z,1520552704.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:04.665Z,1520552704.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:05.060Z,1520552705.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:05.462Z,1520552705.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:05.862Z,1520552705.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:06.265Z,1520552706.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:06.671Z,1520552706.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:06.691Z,1520552706.691 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T23:45:06.691Z,1520552706.691 [Default:CheckIn:C.Wait] Stopped
2018-03-08T23:45:06.691Z,1520552706.691 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T23:45:06.691Z,1520552706.691 [Default:CheckIn:D] Running Loop=1
2018-03-08T23:45:07.062Z,1520552707.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:07.084Z,1520552707.084 [Default:CheckIn:D] Stopped
2018-03-08T23:45:07.084Z,1520552707.084 [Default:CheckIn:E] Running Loop=1
2018-03-08T23:45:10.274Z,1520552710.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:10.294Z,1520552710.294 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 959.371289 min 
2018-03-08T23:45:10.295Z,1520552710.295 [Default:CheckIn:E] Stopped
2018-03-08T23:45:10.295Z,1520552710.295 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T23:45:10.295Z,1520552710.295 [Default:CheckIn] Stopped
2018-03-08T23:45:10.295Z,1520552710.295 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T23:45:10.295Z,1520552710.295 [Default:CheckIn](INFO): Running loop #95
2018-03-08T23:45:10.295Z,1520552710.295 [Default:CheckIn] Running Loop=95
2018-03-08T23:45:10.295Z,1520552710.295 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T23:45:10.295Z,1520552710.295 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T23:45:10.396Z,1520552710.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:10.781Z,1520552710.781 [NAL9602](INFO): Powering up
2018-03-08T23:45:10.798Z,1520552710.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:11.193Z,1520552711.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:11.605Z,1520552711.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:11.998Z,1520552711.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:12.400Z,1520552712.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:12.792Z,1520552712.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:13.206Z,1520552713.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:13.590Z,1520552713.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:13.990Z,1520552713.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:14.393Z,1520552714.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:14.788Z,1520552714.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:15.190Z,1520552715.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:15.594Z,1520552715.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:15.996Z,1520552715.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:16.398Z,1520552716.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:16.798Z,1520552716.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:17.191Z,1520552717.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:17.597Z,1520552717.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:17.998Z,1520552717.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:18.399Z,1520552718.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:18.796Z,1520552718.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:19.201Z,1520552719.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:19.590Z,1520552719.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:19.990Z,1520552719.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:20.396Z,1520552720.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:20.796Z,1520552720.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:21.207Z,1520552721.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:21.609Z,1520552721.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:21.974Z,1520552721.974 [NAL9602](INFO): NAL9602 initialized
2018-03-08T23:45:21.990Z,1520552721.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:22.392Z,1520552722.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:22.819Z,1520552722.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:23.201Z,1520552723.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:23.605Z,1520552723.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:23.994Z,1520552723.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:24.394Z,1520552724.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:24.823Z,1520552724.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:25.224Z,1520552725.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:25.596Z,1520552725.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:25.999Z,1520552725.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:26.399Z,1520552726.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:26.798Z,1520552726.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:27.210Z,1520552727.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:27.607Z,1520552727.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:27.988Z,1520552727.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:28.390Z,1520552728.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:28.793Z,1520552728.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:29.188Z,1520552729.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:29.598Z,1520552729.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:29.998Z,1520552729.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:30.393Z,1520552730.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:30.796Z,1520552730.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:31.202Z,1520552731.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:31.605Z,1520552731.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:32.001Z,1520552732.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:32.407Z,1520552732.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:32.799Z,1520552732.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:33.210Z,1520552733.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:33.601Z,1520552733.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:33.990Z,1520552733.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:34.390Z,1520552734.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:34.790Z,1520552734.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:35.193Z,1520552735.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:35.602Z,1520552735.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:36.002Z,1520552736.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:36.397Z,1520552736.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:36.799Z,1520552736.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:37.197Z,1520552737.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:37.597Z,1520552737.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:37.998Z,1520552737.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:38.403Z,1520552738.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:38.793Z,1520552738.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:39.202Z,1520552739.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:39.597Z,1520552739.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:39.993Z,1520552739.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:40.394Z,1520552740.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:40.790Z,1520552740.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:41.192Z,1520552741.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:41.593Z,1520552741.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:41.995Z,1520552741.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:42.392Z,1520552742.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:42.809Z,1520552742.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:43.229Z,1520552743.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:43.595Z,1520552743.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:43.992Z,1520552743.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:44.392Z,1520552744.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:44.800Z,1520552744.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:45.198Z,1520552745.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:45.575Z,1520552745.575 [NAL9602](INFO): SBD MO Status=2, MOMSN=4900, MT Status=2, MTMSN=0
2018-03-08T23:45:45.576Z,1520552745.576 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-08T23:45:45.595Z,1520552745.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:46.008Z,1520552746.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:46.393Z,1520552746.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:46.792Z,1520552746.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:47.191Z,1520552747.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:47.590Z,1520552747.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:48.005Z,1520552748.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:48.399Z,1520552748.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:48.802Z,1520552748.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:49.203Z,1520552749.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:49.604Z,1520552749.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:50.013Z,1520552750.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:50.390Z,1520552750.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:50.790Z,1520552750.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:51.193Z,1520552751.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:51.598Z,1520552751.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:51.991Z,1520552751.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:52.390Z,1520552752.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:52.799Z,1520552752.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:53.199Z,1520552753.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:53.599Z,1520552753.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:53.998Z,1520552753.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:54.401Z,1520552754.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:54.790Z,1520552754.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:55.175Z,1520552755.175 [NAL9602](INFO): SBD MO Status=0, MOMSN=4900, MT Status=0, MTMSN=0
2018-03-08T23:45:55.175Z,1520552755.175 [NAL9602](INFO): No messages in MT queue
2018-03-08T23:45:55.192Z,1520552755.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:55.590Z,1520552755.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:56.005Z,1520552756.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:56.382Z,1520552756.382 [NAL9602](INFO): GPS fix at 20180308T234515: (21.316509, -157.875827)
2018-03-08T23:45:56.412Z,1520552756.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:56.447Z,1520552756.447 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T23:45:56.447Z,1520552756.447 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T23:45:56.817Z,1520552756.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:57.285Z,1520552757.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:57.596Z,1520552757.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:45:58.003Z,1520552758.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:01.221Z,1520552761.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:01.344Z,1520552761.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:01.705Z,1520552761.705 [DataOverHttps](INFO): Sending 63 bytes from file Logs/20180308T074127/Courier0380.lzma
2018-03-08T23:46:01.730Z,1520552761.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:02.116Z,1520552762.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:02.530Z,1520552762.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:02.904Z,1520552762.904 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0380.lzma.bak
2018-03-08T23:46:02.904Z,1520552762.904 [DataOverHttps](INFO): SBD MOMSN=7990221
2018-03-08T23:46:02.930Z,1520552762.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:03.521Z,1520552763.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:03.735Z,1520552763.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:07.042Z,1520552767.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:07.155Z,1520552767.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:07.550Z,1520552767.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:07.949Z,1520552767.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:08.349Z,1520552768.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:08.754Z,1520552768.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:09.147Z,1520552769.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:09.544Z,1520552769.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:13.011Z,1520552773.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:13.135Z,1520552773.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:15.597Z,1520552775.597 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20180308T074127/Express0381.lzma
2018-03-08T23:46:15.618Z,1520552775.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:15.748Z,1520552775.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:16.113Z,1520552776.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:16.480Z,1520552776.480 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0381.lzma.bak
2018-03-08T23:46:16.480Z,1520552776.480 [DataOverHttps](INFO): SBD MOMSN=7990225
2018-03-08T23:46:16.518Z,1520552776.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:17.102Z,1520552777.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:17.122Z,1520552777.122 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T23:46:17.122Z,1520552777.122 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T23:46:17.122Z,1520552777.122 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T23:46:17.318Z,1520552777.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:20.730Z,1520552780.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:20.853Z,1520552780.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:21.231Z,1520552781.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:21.624Z,1520552781.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:22.026Z,1520552782.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:22.427Z,1520552782.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:22.825Z,1520552782.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:23.231Z,1520552783.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:23.634Z,1520552783.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:24.027Z,1520552784.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:24.431Z,1520552784.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:24.831Z,1520552784.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:25.225Z,1520552785.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:25.630Z,1520552785.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:26.040Z,1520552786.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:26.430Z,1520552786.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:26.827Z,1520552786.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:27.234Z,1520552787.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:27.622Z,1520552787.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:28.031Z,1520552788.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:28.429Z,1520552788.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:28.827Z,1520552788.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:29.226Z,1520552789.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:29.628Z,1520552789.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:30.027Z,1520552790.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:30.426Z,1520552790.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:30.829Z,1520552790.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:31.206Z,1520552791.206 [NAL9602](INFO): Powering down
2018-03-08T23:46:31.233Z,1520552791.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:31.627Z,1520552791.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:32.029Z,1520552792.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:32.430Z,1520552792.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:32.822Z,1520552792.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:33.221Z,1520552793.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:33.618Z,1520552793.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:34.034Z,1520552794.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:34.427Z,1520552794.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:34.827Z,1520552794.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:35.230Z,1520552795.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:35.631Z,1520552795.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:36.027Z,1520552796.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:36.430Z,1520552796.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:36.831Z,1520552796.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:37.219Z,1520552797.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:37.630Z,1520552797.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:38.030Z,1520552798.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:38.422Z,1520552798.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:38.825Z,1520552798.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:39.241Z,1520552799.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:39.619Z,1520552799.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:40.022Z,1520552800.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:40.427Z,1520552800.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:40.818Z,1520552800.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:41.227Z,1520552801.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:41.631Z,1520552801.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:42.027Z,1520552802.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:42.430Z,1520552802.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:42.828Z,1520552802.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:43.228Z,1520552803.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:43.634Z,1520552803.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:44.022Z,1520552804.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:44.418Z,1520552804.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:44.822Z,1520552804.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:45.226Z,1520552805.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:45.627Z,1520552805.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:46.027Z,1520552806.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:46.430Z,1520552806.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:46.829Z,1520552806.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:47.229Z,1520552807.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:47.634Z,1520552807.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:48.022Z,1520552808.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:48.434Z,1520552808.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:48.827Z,1520552808.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:49.226Z,1520552809.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:49.628Z,1520552809.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:50.031Z,1520552810.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:50.430Z,1520552810.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:50.830Z,1520552810.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:51.242Z,1520552811.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:51.622Z,1520552811.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:52.022Z,1520552812.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:52.422Z,1520552812.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:52.818Z,1520552812.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:53.225Z,1520552813.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:53.622Z,1520552813.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:54.028Z,1520552814.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:54.426Z,1520552814.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:54.836Z,1520552814.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:55.231Z,1520552815.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:55.623Z,1520552815.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:56.031Z,1520552816.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:56.428Z,1520552816.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:56.824Z,1520552816.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:57.228Z,1520552817.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:57.630Z,1520552817.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:58.023Z,1520552818.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:58.426Z,1520552818.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:58.831Z,1520552818.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:59.227Z,1520552819.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:46:59.636Z,1520552819.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:00.031Z,1520552820.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:00.418Z,1520552820.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:00.822Z,1520552820.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:01.222Z,1520552821.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:01.616Z,1520552821.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:02.023Z,1520552822.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:02.422Z,1520552822.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:02.822Z,1520552822.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:03.222Z,1520552823.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:03.622Z,1520552823.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:04.019Z,1520552824.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:04.430Z,1520552824.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:04.821Z,1520552824.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:05.219Z,1520552825.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:05.630Z,1520552825.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:06.022Z,1520552826.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:06.423Z,1520552826.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:06.827Z,1520552826.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:07.230Z,1520552827.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:07.629Z,1520552827.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:08.024Z,1520552828.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:08.422Z,1520552828.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:08.818Z,1520552828.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:09.230Z,1520552829.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:09.626Z,1520552829.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:10.019Z,1520552830.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:10.427Z,1520552830.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:10.826Z,1520552830.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:11.227Z,1520552831.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:11.626Z,1520552831.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:12.034Z,1520552832.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:12.426Z,1520552832.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:12.824Z,1520552832.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:13.234Z,1520552833.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:13.630Z,1520552833.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:14.029Z,1520552834.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:14.430Z,1520552834.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:14.822Z,1520552834.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:15.225Z,1520552835.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:15.618Z,1520552835.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:16.018Z,1520552836.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:16.424Z,1520552836.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:16.834Z,1520552836.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:16.852Z,1520552836.852 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:47:16.852Z,1520552836.852 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-08T23:47:16.852Z,1520552836.852 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T23:47:16.915Z,1520552836.915 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T23:47:17.218Z,1520552837.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:17.297Z,1520552837.297 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T23:47:17.297Z,1520552837.297 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-08T23:47:17.627Z,1520552837.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:17.661Z,1520552837.661 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T23:47:17.661Z,1520552837.661 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T23:47:17.662Z,1520552837.662 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T23:47:20.800Z,1520552840.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:20.924Z,1520552840.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:21.285Z,1520552841.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:21.682Z,1520552841.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:22.102Z,1520552842.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:22.474Z,1520552842.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:22.917Z,1520552842.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:23.315Z,1520552843.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:23.694Z,1520552843.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:24.108Z,1520552844.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:24.512Z,1520552844.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:24.887Z,1520552844.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:25.304Z,1520552845.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:25.664Z,1520552845.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:26.091Z,1520552846.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:26.473Z,1520552846.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:26.867Z,1520552846.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:27.282Z,1520552847.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:27.675Z,1520552847.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:28.067Z,1520552848.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:28.472Z,1520552848.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:28.909Z,1520552848.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:29.279Z,1520552849.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:29.706Z,1520552849.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:30.124Z,1520552850.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:30.497Z,1520552850.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:30.897Z,1520552850.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:31.301Z,1520552851.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:31.705Z,1520552851.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:32.089Z,1520552852.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:32.502Z,1520552852.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:32.884Z,1520552852.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:33.285Z,1520552853.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:33.682Z,1520552853.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:34.084Z,1520552854.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:34.486Z,1520552854.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:34.886Z,1520552854.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:35.285Z,1520552855.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:35.673Z,1520552855.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:36.109Z,1520552856.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:36.475Z,1520552856.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:36.885Z,1520552856.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:37.320Z,1520552857.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:37.667Z,1520552857.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:38.108Z,1520552858.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:38.476Z,1520552858.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:38.895Z,1520552858.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:39.280Z,1520552859.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:39.693Z,1520552859.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:40.102Z,1520552860.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:40.499Z,1520552860.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:40.885Z,1520552860.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:41.279Z,1520552861.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:41.679Z,1520552861.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:42.079Z,1520552862.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:42.477Z,1520552862.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:42.880Z,1520552862.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:43.274Z,1520552863.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:43.727Z,1520552863.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:44.080Z,1520552864.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:44.512Z,1520552864.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:44.900Z,1520552864.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:45.285Z,1520552865.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:45.685Z,1520552865.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:46.067Z,1520552866.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:46.471Z,1520552866.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:46.908Z,1520552866.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:47.284Z,1520552867.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:47.713Z,1520552867.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:48.083Z,1520552868.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:48.483Z,1520552868.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:48.879Z,1520552868.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:49.287Z,1520552869.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:49.680Z,1520552869.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:50.083Z,1520552870.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:50.481Z,1520552870.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:50.877Z,1520552870.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:51.309Z,1520552871.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:51.678Z,1520552871.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:52.110Z,1520552872.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:52.481Z,1520552872.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:52.889Z,1520552872.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:53.285Z,1520552873.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:53.706Z,1520552873.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:54.109Z,1520552874.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:54.495Z,1520552874.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:54.900Z,1520552874.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:55.290Z,1520552875.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:55.667Z,1520552875.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:56.086Z,1520552876.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:56.491Z,1520552876.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:56.867Z,1520552876.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:57.274Z,1520552877.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:57.671Z,1520552877.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:58.064Z,1520552878.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:58.507Z,1520552878.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:58.875Z,1520552878.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:59.267Z,1520552879.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:47:59.701Z,1520552879.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:00.100Z,1520552880.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:00.507Z,1520552880.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:00.898Z,1520552880.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:01.291Z,1520552881.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:01.685Z,1520552881.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:02.087Z,1520552882.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:02.487Z,1520552882.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:02.874Z,1520552882.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:03.286Z,1520552883.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:03.686Z,1520552883.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:04.075Z,1520552884.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:04.477Z,1520552884.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:04.877Z,1520552884.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:05.297Z,1520552885.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:05.673Z,1520552885.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:06.119Z,1520552886.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:06.514Z,1520552886.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:06.893Z,1520552886.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:07.306Z,1520552887.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:07.667Z,1520552887.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:08.087Z,1520552888.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:08.492Z,1520552888.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:08.901Z,1520552888.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:09.287Z,1520552889.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:09.688Z,1520552889.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:10.087Z,1520552890.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:10.488Z,1520552890.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:10.889Z,1520552890.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:11.281Z,1520552891.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:11.681Z,1520552891.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:12.078Z,1520552892.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:12.509Z,1520552892.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:12.873Z,1520552892.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:13.299Z,1520552893.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:13.689Z,1520552893.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:14.076Z,1520552894.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:14.493Z,1520552894.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:14.898Z,1520552894.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:15.302Z,1520552895.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:15.693Z,1520552895.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:16.101Z,1520552896.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:16.483Z,1520552896.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:16.881Z,1520552896.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:17.280Z,1520552897.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:17.695Z,1520552897.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:20.943Z,1520552900.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:21.069Z,1520552901.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:21.425Z,1520552901.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:21.829Z,1520552901.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:22.227Z,1520552902.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:22.631Z,1520552902.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:23.022Z,1520552903.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:23.422Z,1520552903.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:23.822Z,1520552903.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:24.226Z,1520552904.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:24.622Z,1520552904.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:25.026Z,1520552905.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:25.422Z,1520552905.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:25.817Z,1520552905.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:26.226Z,1520552906.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:26.631Z,1520552906.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:27.018Z,1520552907.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:27.431Z,1520552907.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:27.821Z,1520552907.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:28.222Z,1520552908.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:28.633Z,1520552908.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:29.021Z,1520552909.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:29.427Z,1520552909.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:29.825Z,1520552909.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:30.225Z,1520552910.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:30.630Z,1520552910.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:31.025Z,1520552911.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:31.419Z,1520552911.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:31.811Z,1520552911.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:32.229Z,1520552912.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:32.611Z,1520552912.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:33.018Z,1520552913.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:33.414Z,1520552913.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:33.811Z,1520552913.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:34.214Z,1520552914.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:34.626Z,1520552914.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:35.011Z,1520552915.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:35.414Z,1520552915.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:35.818Z,1520552915.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:36.218Z,1520552916.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:36.623Z,1520552916.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:37.026Z,1520552917.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:37.423Z,1520552917.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:37.823Z,1520552917.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:38.222Z,1520552918.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:38.618Z,1520552918.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:39.018Z,1520552919.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:39.423Z,1520552919.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:39.818Z,1520552919.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:40.222Z,1520552920.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:40.622Z,1520552920.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:41.022Z,1520552921.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:41.423Z,1520552921.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:41.822Z,1520552921.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:42.218Z,1520552922.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:42.622Z,1520552922.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:43.022Z,1520552923.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:43.416Z,1520552923.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:43.825Z,1520552923.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:44.222Z,1520552924.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:44.619Z,1520552924.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:45.022Z,1520552925.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:45.422Z,1520552925.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:45.818Z,1520552925.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:46.227Z,1520552926.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:46.622Z,1520552926.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:47.021Z,1520552927.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:47.425Z,1520552927.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:47.822Z,1520552927.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:48.223Z,1520552928.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:48.622Z,1520552928.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:49.031Z,1520552929.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:49.419Z,1520552929.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:49.826Z,1520552929.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:50.232Z,1520552930.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:50.619Z,1520552930.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:51.027Z,1520552931.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:51.422Z,1520552931.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:51.818Z,1520552931.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:52.224Z,1520552932.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:52.622Z,1520552932.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:53.008Z,1520552933.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:53.426Z,1520552933.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:53.831Z,1520552933.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:54.226Z,1520552934.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:54.631Z,1520552934.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:55.034Z,1520552935.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:55.411Z,1520552935.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:55.821Z,1520552935.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:56.233Z,1520552936.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:56.611Z,1520552936.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:57.021Z,1520552937.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:57.430Z,1520552937.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:57.811Z,1520552937.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:58.217Z,1520552938.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:58.614Z,1520552938.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:59.011Z,1520552939.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:59.414Z,1520552939.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:48:59.815Z,1520552939.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:00.214Z,1520552940.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:00.634Z,1520552940.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:01.014Z,1520552941.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:01.414Z,1520552941.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:01.825Z,1520552941.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:02.214Z,1520552942.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:02.615Z,1520552942.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:03.014Z,1520552943.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:03.414Z,1520552943.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:03.814Z,1520552943.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:04.218Z,1520552944.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:04.615Z,1520552944.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:05.018Z,1520552945.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:05.417Z,1520552945.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:05.825Z,1520552945.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:06.220Z,1520552946.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:06.622Z,1520552946.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:07.026Z,1520552947.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:07.419Z,1520552947.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:07.817Z,1520552947.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:08.239Z,1520552948.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:08.611Z,1520552948.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:09.011Z,1520552949.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:09.433Z,1520552949.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:09.810Z,1520552949.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:10.215Z,1520552950.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:10.615Z,1520552950.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:11.014Z,1520552951.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:11.410Z,1520552951.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:11.814Z,1520552951.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:12.219Z,1520552952.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:12.608Z,1520552952.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:13.014Z,1520552953.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:13.418Z,1520552953.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:13.815Z,1520552953.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:14.223Z,1520552954.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:14.621Z,1520552954.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:15.022Z,1520552955.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:15.430Z,1520552955.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:15.825Z,1520552955.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:16.222Z,1520552956.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:16.627Z,1520552956.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:17.022Z,1520552957.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:17.415Z,1520552957.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:17.822Z,1520552957.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:20.998Z,1520552960.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:21.125Z,1520552961.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:21.487Z,1520552961.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:21.882Z,1520552961.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:22.282Z,1520552962.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:22.692Z,1520552962.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:23.079Z,1520552963.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:23.470Z,1520552963.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:23.886Z,1520552963.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:24.282Z,1520552964.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:24.667Z,1520552964.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:25.074Z,1520552965.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:25.470Z,1520552965.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:25.869Z,1520552965.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:26.294Z,1520552966.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:26.670Z,1520552966.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:27.074Z,1520552967.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:27.474Z,1520552967.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:27.874Z,1520552967.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:28.278Z,1520552968.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:28.731Z,1520552968.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:29.074Z,1520552969.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:29.482Z,1520552969.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:29.882Z,1520552969.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:30.278Z,1520552970.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:30.679Z,1520552970.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:31.075Z,1520552971.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:31.478Z,1520552971.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:31.879Z,1520552971.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:32.278Z,1520552972.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:32.686Z,1520552972.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:33.079Z,1520552973.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:33.476Z,1520552973.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:33.885Z,1520552973.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:34.285Z,1520552974.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:34.692Z,1520552974.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:35.078Z,1520552975.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:35.482Z,1520552975.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:35.891Z,1520552975.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:36.270Z,1520552976.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:36.681Z,1520552976.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:37.095Z,1520552977.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:37.470Z,1520552977.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:37.874Z,1520552977.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:38.274Z,1520552978.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:38.670Z,1520552978.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:39.070Z,1520552979.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:39.474Z,1520552979.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:39.874Z,1520552979.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:40.271Z,1520552980.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:40.678Z,1520552980.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:41.074Z,1520552981.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:41.474Z,1520552981.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:41.881Z,1520552981.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:42.281Z,1520552982.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:42.695Z,1520552982.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:43.087Z,1520552983.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:43.484Z,1520552983.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:43.876Z,1520552983.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:44.296Z,1520552984.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:44.670Z,1520552984.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:45.106Z,1520552985.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:45.481Z,1520552985.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:45.874Z,1520552985.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:46.276Z,1520552986.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:46.682Z,1520552986.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:47.079Z,1520552987.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:47.481Z,1520552987.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:47.888Z,1520552987.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:48.282Z,1520552988.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:48.679Z,1520552988.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:49.092Z,1520552989.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:49.483Z,1520552989.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:49.871Z,1520552989.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:50.294Z,1520552990.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:50.673Z,1520552990.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:51.070Z,1520552991.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:51.474Z,1520552991.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:51.875Z,1520552991.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:52.275Z,1520552992.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:52.691Z,1520552992.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:53.071Z,1520552993.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:53.479Z,1520552993.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:53.875Z,1520552993.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:54.273Z,1520552994.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:54.678Z,1520552994.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:55.080Z,1520552995.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:55.483Z,1520552995.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:55.882Z,1520552995.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:56.291Z,1520552996.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:56.687Z,1520552996.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:57.078Z,1520552997.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:57.493Z,1520552997.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:57.886Z,1520552997.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:58.282Z,1520552998.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:58.683Z,1520552998.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:59.070Z,1520552999.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:59.470Z,1520552999.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:49:59.882Z,1520552999.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:00.270Z,1520553000.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:00.673Z,1520553000.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:01.078Z,1520553001.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:01.475Z,1520553001.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:01.874Z,1520553001.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:02.274Z,1520553002.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:02.674Z,1520553002.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:03.070Z,1520553003.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:03.475Z,1520553003.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:03.873Z,1520553003.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:04.270Z,1520553004.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:04.678Z,1520553004.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:05.074Z,1520553005.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:05.478Z,1520553005.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:05.875Z,1520553005.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:06.282Z,1520553006.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:06.674Z,1520553006.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:07.079Z,1520553007.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:07.482Z,1520553007.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:07.875Z,1520553007.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:08.283Z,1520553008.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:08.683Z,1520553008.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:09.079Z,1520553009.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:09.483Z,1520553009.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:09.883Z,1520553009.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:10.285Z,1520553010.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:10.681Z,1520553010.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:11.088Z,1520553011.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:11.479Z,1520553011.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:11.874Z,1520553011.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:12.276Z,1520553012.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:12.678Z,1520553012.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:13.079Z,1520553013.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:13.476Z,1520553013.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:13.874Z,1520553013.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:14.275Z,1520553014.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:14.689Z,1520553014.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:15.070Z,1520553015.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:15.474Z,1520553015.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:15.887Z,1520553015.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:16.279Z,1520553016.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:16.683Z,1520553016.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:17.083Z,1520553017.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:17.481Z,1520553017.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:17.886Z,1520553017.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:17.904Z,1520553017.904 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:50:17.904Z,1520553017.904 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-08T23:50:17.904Z,1520553017.904 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T23:50:17.936Z,1520553017.936 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T23:50:21.076Z,1520553021.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:21.155Z,1520553021.155 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T23:50:21.155Z,1520553021.155 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-08T23:50:21.214Z,1520553021.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:21.244Z,1520553021.244 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T23:50:21.249Z,1520553021.249 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T23:50:21.249Z,1520553021.249 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T23:50:21.606Z,1520553021.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:22.008Z,1520553022.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:22.403Z,1520553022.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:22.798Z,1520553022.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:23.210Z,1520553023.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:23.595Z,1520553023.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:23.998Z,1520553023.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:24.418Z,1520553024.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:24.805Z,1520553024.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:25.213Z,1520553025.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:25.613Z,1520553025.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:25.997Z,1520553025.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:26.445Z,1520553026.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:26.807Z,1520553026.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:27.206Z,1520553027.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:27.606Z,1520553027.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:28.014Z,1520553028.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:28.398Z,1520553028.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:28.798Z,1520553028.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:29.202Z,1520553029.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:29.599Z,1520553029.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:30.002Z,1520553030.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:30.409Z,1520553030.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:30.798Z,1520553030.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:31.198Z,1520553031.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:31.600Z,1520553031.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:31.998Z,1520553031.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:32.405Z,1520553032.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:32.803Z,1520553032.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:33.206Z,1520553033.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:33.606Z,1520553033.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:34.010Z,1520553034.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:34.399Z,1520553034.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:34.802Z,1520553034.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:35.202Z,1520553035.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:35.598Z,1520553035.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:35.998Z,1520553035.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:36.402Z,1520553036.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:36.798Z,1520553036.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:37.214Z,1520553037.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:37.603Z,1520553037.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:38.007Z,1520553038.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:38.407Z,1520553038.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:38.795Z,1520553038.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:39.199Z,1520553039.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:39.606Z,1520553039.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:39.995Z,1520553039.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:40.398Z,1520553040.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:40.798Z,1520553040.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:41.202Z,1520553041.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:41.606Z,1520553041.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:42.007Z,1520553042.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:42.408Z,1520553042.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:42.807Z,1520553042.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:43.207Z,1520553043.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:43.610Z,1520553043.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:44.007Z,1520553044.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:44.398Z,1520553044.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:44.795Z,1520553044.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:45.194Z,1520553045.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:45.598Z,1520553045.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:45.995Z,1520553045.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:46.399Z,1520553046.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:46.798Z,1520553046.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:47.198Z,1520553047.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:47.598Z,1520553047.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:48.005Z,1520553048.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:48.405Z,1520553048.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:48.805Z,1520553048.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:49.211Z,1520553049.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:49.609Z,1520553049.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:49.998Z,1520553049.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:50.399Z,1520553050.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:50.798Z,1520553050.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:51.200Z,1520553051.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:51.606Z,1520553051.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:52.006Z,1520553052.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:52.403Z,1520553052.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:52.805Z,1520553052.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:53.198Z,1520553053.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:53.610Z,1520553053.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:54.014Z,1520553054.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:54.406Z,1520553054.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:54.793Z,1520553054.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:55.215Z,1520553055.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:55.610Z,1520553055.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:56.010Z,1520553056.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:56.398Z,1520553056.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:56.799Z,1520553056.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:57.202Z,1520553057.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:57.598Z,1520553057.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:57.995Z,1520553057.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:58.411Z,1520553058.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:58.811Z,1520553058.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:59.195Z,1520553059.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:50:59.601Z,1520553059.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:00.015Z,1520553060.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:00.402Z,1520553060.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:00.802Z,1520553060.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:01.198Z,1520553061.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:01.602Z,1520553061.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:02.002Z,1520553062.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:02.398Z,1520553062.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:02.796Z,1520553062.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:03.202Z,1520553063.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:03.598Z,1520553063.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:03.998Z,1520553063.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:04.398Z,1520553064.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:04.810Z,1520553064.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:05.204Z,1520553065.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:05.610Z,1520553065.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:05.998Z,1520553065.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:06.399Z,1520553066.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:06.814Z,1520553066.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:07.198Z,1520553067.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:07.599Z,1520553067.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:08.006Z,1520553068.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:08.406Z,1520553068.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:08.798Z,1520553068.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:09.202Z,1520553069.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:09.606Z,1520553069.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:09.998Z,1520553069.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:10.414Z,1520553070.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:10.810Z,1520553070.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:11.216Z,1520553071.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:11.614Z,1520553071.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:11.998Z,1520553071.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:12.406Z,1520553072.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:12.805Z,1520553072.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:13.209Z,1520553073.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:13.602Z,1520553073.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:14.003Z,1520553074.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:14.408Z,1520553074.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:14.807Z,1520553074.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:15.208Z,1520553075.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:15.605Z,1520553075.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:16.009Z,1520553076.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:16.413Z,1520553076.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:16.800Z,1520553076.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:17.218Z,1520553077.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:17.611Z,1520553077.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:17.631Z,1520553077.631 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T23:51:17.631Z,1520553077.631 [Default:CheckIn:C.Wait] Stopped
2018-03-08T23:51:17.631Z,1520553077.631 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T23:51:17.631Z,1520553077.631 [Default:CheckIn:D] Running Loop=1
2018-03-08T23:51:17.998Z,1520553077.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:18.044Z,1520553078.044 [Default:CheckIn:D] Stopped
2018-03-08T23:51:18.044Z,1520553078.044 [Default:CheckIn:E] Running Loop=1
2018-03-08T23:51:21.403Z,1520553081.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:21.437Z,1520553081.437 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 965.553971 min 
2018-03-08T23:51:21.438Z,1520553081.438 [Default:CheckIn:E] Stopped
2018-03-08T23:51:21.438Z,1520553081.438 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T23:51:21.438Z,1520553081.438 [Default:CheckIn] Stopped
2018-03-08T23:51:21.438Z,1520553081.438 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T23:51:21.438Z,1520553081.438 [Default:CheckIn](INFO): Running loop #96
2018-03-08T23:51:21.438Z,1520553081.438 [Default:CheckIn] Running Loop=96
2018-03-08T23:51:21.438Z,1520553081.438 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T23:51:21.438Z,1520553081.438 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T23:51:21.542Z,1520553081.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:21.875Z,1520553081.875 [NAL9602](INFO): Powering up
2018-03-08T23:51:21.892Z,1520553081.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:22.291Z,1520553082.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:22.693Z,1520553082.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:23.084Z,1520553083.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:23.490Z,1520553083.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:23.891Z,1520553083.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:24.302Z,1520553084.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:24.682Z,1520553084.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:25.082Z,1520553085.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:25.502Z,1520553085.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:25.875Z,1520553085.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:26.303Z,1520553086.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:26.681Z,1520553086.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:27.075Z,1520553087.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:27.482Z,1520553087.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:27.884Z,1520553087.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:28.282Z,1520553088.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:28.684Z,1520553088.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:29.086Z,1520553089.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:29.486Z,1520553089.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:29.890Z,1520553089.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:30.287Z,1520553090.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:30.688Z,1520553090.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:31.087Z,1520553091.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:31.490Z,1520553091.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:31.890Z,1520553091.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:32.294Z,1520553092.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:32.713Z,1520553092.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:33.066Z,1520553093.066 [NAL9602](INFO): NAL9602 initialized
2018-03-08T23:51:33.083Z,1520553093.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:33.482Z,1520553093.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:33.901Z,1520553093.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:34.301Z,1520553094.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:34.697Z,1520553094.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:35.083Z,1520553095.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:35.482Z,1520553095.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:35.884Z,1520553095.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:36.297Z,1520553096.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:36.680Z,1520553096.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:37.090Z,1520553097.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:37.487Z,1520553097.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:37.888Z,1520553097.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:38.298Z,1520553098.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:38.692Z,1520553098.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:39.081Z,1520553099.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:39.491Z,1520553099.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:39.901Z,1520553099.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:40.285Z,1520553100.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:40.699Z,1520553100.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:41.082Z,1520553101.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:41.486Z,1520553101.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:41.883Z,1520553101.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:42.284Z,1520553102.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:42.704Z,1520553102.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:43.085Z,1520553103.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:43.485Z,1520553103.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:43.890Z,1520553103.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:44.288Z,1520553104.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:44.691Z,1520553104.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:45.091Z,1520553105.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:45.492Z,1520553105.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:45.893Z,1520553105.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:46.284Z,1520553106.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:46.682Z,1520553106.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:47.082Z,1520553107.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:47.482Z,1520553107.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:47.887Z,1520553107.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:48.290Z,1520553108.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:48.682Z,1520553108.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:49.087Z,1520553109.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:49.486Z,1520553109.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:49.887Z,1520553109.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:50.294Z,1520553110.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:50.689Z,1520553110.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:51.091Z,1520553111.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:51.490Z,1520553111.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:51.900Z,1520553111.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:52.290Z,1520553112.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:52.678Z,1520553112.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:53.082Z,1520553113.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:53.482Z,1520553113.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:53.882Z,1520553113.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:54.303Z,1520553114.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:54.678Z,1520553114.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:55.079Z,1520553115.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:55.482Z,1520553115.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:55.878Z,1520553115.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:56.286Z,1520553116.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:56.690Z,1520553116.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:57.067Z,1520553117.067 [NAL9602](INFO): SBD MO Status=2, MOMSN=4901, MT Status=2, MTMSN=0
2018-03-08T23:51:57.067Z,1520553117.067 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-08T23:51:57.084Z,1520553117.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:57.501Z,1520553117.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:57.892Z,1520553117.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:58.285Z,1520553118.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:58.690Z,1520553118.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:59.091Z,1520553119.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:59.488Z,1520553119.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:51:59.893Z,1520553119.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:00.291Z,1520553120.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:00.690Z,1520553120.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:01.091Z,1520553121.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:01.496Z,1520553121.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:01.948Z,1520553121.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:02.284Z,1520553122.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:02.684Z,1520553122.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:03.086Z,1520553123.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:03.484Z,1520553123.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:03.883Z,1520553123.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:04.297Z,1520553124.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:04.693Z,1520553124.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:05.084Z,1520553125.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:05.122Z,1520553125.122 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-08T23:52:05.483Z,1520553125.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:05.882Z,1520553125.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:06.282Z,1520553126.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:06.687Z,1520553126.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:07.082Z,1520553127.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:07.490Z,1520553127.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:07.882Z,1520553127.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:08.287Z,1520553128.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:08.695Z,1520553128.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:09.086Z,1520553129.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:09.486Z,1520553129.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:09.890Z,1520553129.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:10.286Z,1520553130.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:10.693Z,1520553130.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:11.101Z,1520553131.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:11.500Z,1520553131.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:11.894Z,1520553131.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:12.303Z,1520553132.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:12.682Z,1520553132.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:13.101Z,1520553133.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:13.509Z,1520553133.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:13.882Z,1520553133.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:14.282Z,1520553134.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:14.682Z,1520553134.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:15.082Z,1520553135.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:15.482Z,1520553135.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:15.882Z,1520553135.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:16.282Z,1520553136.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:16.690Z,1520553136.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:17.090Z,1520553137.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:17.497Z,1520553137.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:17.905Z,1520553137.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:18.301Z,1520553138.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:21.685Z,1520553141.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:21.817Z,1520553141.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:22.189Z,1520553142.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:22.588Z,1520553142.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:22.966Z,1520553142.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:23.360Z,1520553143.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:23.761Z,1520553143.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:24.158Z,1520553144.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:24.560Z,1520553144.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:24.963Z,1520553144.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:25.363Z,1520553145.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:25.764Z,1520553145.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:26.155Z,1520553146.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:26.572Z,1520553146.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:26.977Z,1520553146.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:27.377Z,1520553147.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:27.768Z,1520553147.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:28.155Z,1520553148.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:28.550Z,1520553148.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:28.958Z,1520553148.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:29.356Z,1520553149.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:29.750Z,1520553149.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:30.153Z,1520553150.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:30.559Z,1520553150.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:30.951Z,1520553150.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:31.354Z,1520553151.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:31.778Z,1520553151.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:32.178Z,1520553152.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:32.570Z,1520553152.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:32.985Z,1520553152.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:33.358Z,1520553153.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:33.754Z,1520553153.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:34.155Z,1520553154.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:34.550Z,1520553154.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:34.954Z,1520553154.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:35.356Z,1520553155.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:35.755Z,1520553155.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:36.158Z,1520553156.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:36.557Z,1520553156.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:36.984Z,1520553156.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:37.373Z,1520553157.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:37.785Z,1520553157.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:38.169Z,1520553158.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:38.561Z,1520553158.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:38.961Z,1520553158.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:39.358Z,1520553159.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:39.760Z,1520553159.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:40.162Z,1520553160.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:40.558Z,1520553160.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:40.964Z,1520553160.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:41.359Z,1520553161.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:41.757Z,1520553161.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:42.176Z,1520553162.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:42.577Z,1520553162.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:42.950Z,1520553162.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:43.350Z,1520553163.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:43.772Z,1520553163.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:44.150Z,1520553164.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:44.558Z,1520553164.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:44.972Z,1520553164.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:45.355Z,1520553165.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:45.772Z,1520553165.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:46.176Z,1520553166.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:46.551Z,1520553166.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:46.959Z,1520553166.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:47.359Z,1520553167.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:47.751Z,1520553167.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:48.159Z,1520553168.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:48.578Z,1520553168.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:48.955Z,1520553168.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:49.354Z,1520553169.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:49.754Z,1520553169.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:50.154Z,1520553170.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:50.560Z,1520553170.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:50.959Z,1520553170.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:51.355Z,1520553171.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:51.757Z,1520553171.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:52.160Z,1520553172.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:52.558Z,1520553172.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:52.958Z,1520553172.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:53.367Z,1520553173.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:53.766Z,1520553173.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:54.158Z,1520553174.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:54.585Z,1520553174.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:54.969Z,1520553174.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:55.350Z,1520553175.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:55.758Z,1520553175.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:56.154Z,1520553176.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:56.550Z,1520553176.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:56.954Z,1520553176.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:57.358Z,1520553177.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:57.752Z,1520553177.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:58.155Z,1520553178.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:58.569Z,1520553178.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:58.965Z,1520553178.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:59.354Z,1520553179.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:52:59.755Z,1520553179.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:00.158Z,1520553180.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:00.566Z,1520553180.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:00.957Z,1520553180.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:01.356Z,1520553181.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:01.759Z,1520553181.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:02.158Z,1520553182.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:02.559Z,1520553182.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:02.966Z,1520553182.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:03.362Z,1520553183.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:03.759Z,1520553183.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:04.163Z,1520553184.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:04.566Z,1520553184.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:04.966Z,1520553184.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:05.363Z,1520553185.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:05.764Z,1520553185.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:06.162Z,1520553186.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:06.563Z,1520553186.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:06.962Z,1520553186.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:07.369Z,1520553187.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:07.764Z,1520553187.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:08.161Z,1520553188.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:08.550Z,1520553188.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:08.975Z,1520553188.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:09.367Z,1520553189.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:09.755Z,1520553189.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:10.158Z,1520553190.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:10.558Z,1520553190.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:10.950Z,1520553190.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:11.339Z,1520553191.339 [NAL9602](INFO): SBD MO Status=0, MOMSN=4901, MT Status=0, MTMSN=0
2018-03-08T23:53:11.339Z,1520553191.339 [NAL9602](INFO): No messages in MT queue
2018-03-08T23:53:11.356Z,1520553191.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:11.758Z,1520553191.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:12.161Z,1520553192.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:12.542Z,1520553192.542 [NAL9602](INFO): GPS fix at 20180308T235231: (21.316520, -157.875690)
2018-03-08T23:53:12.558Z,1520553192.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:12.608Z,1520553192.608 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T23:53:12.608Z,1520553192.608 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T23:53:12.981Z,1520553192.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:13.452Z,1520553193.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:13.765Z,1520553193.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:17.015Z,1520553197.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:17.133Z,1520553197.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:17.496Z,1520553197.496 [DataOverHttps](INFO): Sending 63 bytes from file Logs/20180308T074127/Courier0384.lzma
2018-03-08T23:53:17.516Z,1520553197.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:17.911Z,1520553197.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:18.295Z,1520553198.295 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0384.lzma.bak
2018-03-08T23:53:18.295Z,1520553198.295 [DataOverHttps](INFO): SBD MOMSN=7990236
2018-03-08T23:53:18.316Z,1520553198.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:18.921Z,1520553198.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:19.119Z,1520553199.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:22.534Z,1520553202.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:22.572Z,1520553202.572 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:53:22.572Z,1520553202.572 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-08T23:53:22.572Z,1520553202.572 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T23:53:22.585Z,1520553202.585 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T23:53:22.674Z,1520553202.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:22.741Z,1520553202.741 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T23:53:22.741Z,1520553202.741 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-08T23:53:23.027Z,1520553203.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:23.050Z,1520553203.050 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T23:53:23.050Z,1520553203.050 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T23:53:23.050Z,1520553203.050 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T23:53:23.421Z,1520553203.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:23.831Z,1520553203.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:24.227Z,1520553204.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:24.627Z,1520553204.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:27.852Z,1520553207.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:27.985Z,1520553207.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:28.305Z,1520553208.305 [DataOverHttps](INFO): Sending 122 bytes from file Logs/20180308T074127/Express0385.lzma
2018-03-08T23:53:28.339Z,1520553208.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:28.738Z,1520553208.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:29.104Z,1520553209.104 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0385.lzma.bak
2018-03-08T23:53:29.104Z,1520553209.104 [DataOverHttps](INFO): SBD MOMSN=7990239
2018-03-08T23:53:29.136Z,1520553209.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:29.745Z,1520553209.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:29.766Z,1520553209.766 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T23:53:29.766Z,1520553209.766 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T23:53:29.766Z,1520553209.766 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T23:53:29.939Z,1520553209.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:30.327Z,1520553210.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:33.463Z,1520553213.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:33.583Z,1520553213.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:33.971Z,1520553213.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:34.365Z,1520553214.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:34.769Z,1520553214.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:35.162Z,1520553215.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:35.568Z,1520553215.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:35.969Z,1520553215.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:36.357Z,1520553216.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:36.754Z,1520553216.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:37.166Z,1520553217.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:37.188Z,1520553217.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.397768 seconds old.
2018-03-08T23:53:37.191Z,1520553217.191 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.398393 seconds old.
2018-03-08T23:53:37.193Z,1520553217.193 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.398862 seconds old.
2018-03-08T23:53:37.555Z,1520553217.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:37.583Z,1520553217.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.792652 seconds old.
2018-03-08T23:53:37.586Z,1520553217.586 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.793271 seconds old.
2018-03-08T23:53:37.588Z,1520553217.588 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.793540 seconds old.
2018-03-08T23:53:37.954Z,1520553217.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:37.987Z,1520553217.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.196635 seconds old.
2018-03-08T23:53:37.990Z,1520553217.990 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.197888 seconds old.
2018-03-08T23:53:37.992Z,1520553217.992 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.198142 seconds old.
2018-03-08T23:53:38.358Z,1520553218.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:38.387Z,1520553218.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.596986 seconds old.
2018-03-08T23:53:38.390Z,1520553218.390 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.597610 seconds old.
2018-03-08T23:53:38.392Z,1520553218.392 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.597872 seconds old.
2018-03-08T23:53:38.755Z,1520553218.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:38.786Z,1520553218.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.996069 seconds old.
2018-03-08T23:53:38.789Z,1520553218.789 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.996677 seconds old.
2018-03-08T23:53:38.791Z,1520553218.791 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.996968 seconds old.
2018-03-08T23:53:39.151Z,1520553219.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:39.191Z,1520553219.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.400822 seconds old.
2018-03-08T23:53:39.194Z,1520553219.194 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.401322 seconds old.
2018-03-08T23:53:39.196Z,1520553219.196 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.401608 seconds old.
2018-03-08T23:53:39.560Z,1520553219.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:39.589Z,1520553219.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.798867 seconds old.
2018-03-08T23:53:39.592Z,1520553219.592 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.799286 seconds old.
2018-03-08T23:53:39.594Z,1520553219.594 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.799794 seconds old.
2018-03-08T23:53:39.954Z,1520553219.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:39.988Z,1520553219.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.197480 seconds old.
2018-03-08T23:53:39.990Z,1520553219.990 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.198097 seconds old.
2018-03-08T23:53:39.993Z,1520553219.993 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.198369 seconds old.
2018-03-08T23:53:40.350Z,1520553220.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:40.755Z,1520553220.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:41.157Z,1520553221.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:41.554Z,1520553221.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:41.963Z,1520553221.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:42.380Z,1520553222.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:42.758Z,1520553222.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:43.156Z,1520553223.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:43.560Z,1520553223.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:43.955Z,1520553223.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:44.358Z,1520553224.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:44.755Z,1520553224.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:45.154Z,1520553225.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:45.555Z,1520553225.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:45.991Z,1520553225.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:46.354Z,1520553226.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:46.754Z,1520553226.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:47.146Z,1520553227.146 [NAL9602](INFO): Powering down
2018-03-08T23:53:47.167Z,1520553227.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:47.561Z,1520553227.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:47.959Z,1520553227.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:48.363Z,1520553228.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:48.764Z,1520553228.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:49.166Z,1520553229.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:49.566Z,1520553229.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:49.962Z,1520553229.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:50.364Z,1520553230.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:50.775Z,1520553230.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:51.170Z,1520553231.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:51.554Z,1520553231.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:51.955Z,1520553231.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:52.352Z,1520553232.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:52.772Z,1520553232.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:53.155Z,1520553233.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:53.550Z,1520553233.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:53.954Z,1520553233.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:54.354Z,1520553234.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:54.750Z,1520553234.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:55.155Z,1520553235.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:55.557Z,1520553235.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:55.955Z,1520553235.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:56.354Z,1520553236.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:56.769Z,1520553236.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:57.164Z,1520553237.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:57.559Z,1520553237.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:57.966Z,1520553237.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:58.360Z,1520553238.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:58.760Z,1520553238.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:59.159Z,1520553239.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:59.561Z,1520553239.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:53:59.964Z,1520553239.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:00.364Z,1520553240.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:00.758Z,1520553240.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:01.155Z,1520553241.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:01.563Z,1520553241.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:01.966Z,1520553241.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:02.362Z,1520553242.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:02.770Z,1520553242.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:03.167Z,1520553243.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:03.569Z,1520553243.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:03.975Z,1520553243.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:04.363Z,1520553244.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:04.752Z,1520553244.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:05.161Z,1520553245.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:05.562Z,1520553245.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:05.948Z,1520553245.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:06.365Z,1520553246.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:06.768Z,1520553246.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:07.151Z,1520553247.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:07.570Z,1520553247.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:07.955Z,1520553247.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:08.365Z,1520553248.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:08.754Z,1520553248.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:09.169Z,1520553249.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:09.556Z,1520553249.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:09.976Z,1520553249.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:10.354Z,1520553250.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:10.750Z,1520553250.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:11.155Z,1520553251.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:11.561Z,1520553251.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:11.951Z,1520553251.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:12.354Z,1520553252.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:12.765Z,1520553252.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:13.157Z,1520553253.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:13.562Z,1520553253.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:13.959Z,1520553253.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:14.365Z,1520553254.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:14.763Z,1520553254.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:15.163Z,1520553255.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:15.561Z,1520553255.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:15.966Z,1520553255.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:16.366Z,1520553256.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:16.761Z,1520553256.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:17.164Z,1520553257.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:17.567Z,1520553257.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:17.965Z,1520553257.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:18.363Z,1520553258.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:18.762Z,1520553258.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:19.152Z,1520553259.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:19.569Z,1520553259.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:19.950Z,1520553259.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:20.355Z,1520553260.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:20.775Z,1520553260.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:21.168Z,1520553261.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:21.555Z,1520553261.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:21.954Z,1520553261.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:22.357Z,1520553262.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:22.755Z,1520553262.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:23.179Z,1520553263.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:23.554Z,1520553263.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:23.949Z,1520553263.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:24.353Z,1520553264.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:24.754Z,1520553264.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:25.151Z,1520553265.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:25.555Z,1520553265.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:25.954Z,1520553265.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:26.358Z,1520553266.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:26.754Z,1520553266.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:27.164Z,1520553267.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:27.565Z,1520553267.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:27.959Z,1520553267.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:28.368Z,1520553268.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:28.757Z,1520553268.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:29.167Z,1520553269.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:29.559Z,1520553269.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:29.961Z,1520553269.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:30.364Z,1520553270.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:34.056Z,1520553274.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:34.180Z,1520553274.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:34.566Z,1520553274.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:34.957Z,1520553274.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:35.364Z,1520553275.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:35.759Z,1520553275.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:36.159Z,1520553276.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:36.560Z,1520553276.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:36.957Z,1520553276.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:37.364Z,1520553277.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:37.763Z,1520553277.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:38.157Z,1520553278.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:38.561Z,1520553278.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:38.948Z,1520553278.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:39.358Z,1520553279.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:39.751Z,1520553279.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:40.148Z,1520553280.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:40.550Z,1520553280.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:40.946Z,1520553280.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:41.356Z,1520553281.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:41.754Z,1520553281.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:42.154Z,1520553282.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:42.554Z,1520553282.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:42.956Z,1520553282.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:43.353Z,1520553283.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:43.756Z,1520553283.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:44.160Z,1520553284.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:44.558Z,1520553284.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:44.955Z,1520553284.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:45.356Z,1520553285.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:45.762Z,1520553285.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:46.148Z,1520553286.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:46.550Z,1520553286.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:46.954Z,1520553286.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:47.347Z,1520553287.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:47.750Z,1520553287.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:48.150Z,1520553288.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:48.554Z,1520553288.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:48.950Z,1520553288.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:49.346Z,1520553289.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:49.747Z,1520553289.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:50.150Z,1520553290.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:50.553Z,1520553290.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:50.951Z,1520553290.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:51.360Z,1520553291.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:51.758Z,1520553291.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:52.155Z,1520553292.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:52.550Z,1520553292.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:52.950Z,1520553292.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:53.347Z,1520553293.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:53.750Z,1520553293.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:54.150Z,1520553294.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:54.550Z,1520553294.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:54.957Z,1520553294.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:55.358Z,1520553295.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:55.751Z,1520553295.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:56.157Z,1520553296.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:56.559Z,1520553296.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:56.954Z,1520553296.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:57.363Z,1520553297.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:57.759Z,1520553297.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:58.159Z,1520553298.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:58.557Z,1520553298.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:58.962Z,1520553298.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:59.355Z,1520553299.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:54:59.757Z,1520553299.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:00.161Z,1520553300.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:00.562Z,1520553300.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:00.953Z,1520553300.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:01.350Z,1520553301.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:01.747Z,1520553301.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:02.150Z,1520553302.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:02.551Z,1520553302.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:02.946Z,1520553302.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:03.350Z,1520553303.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:03.746Z,1520553303.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:04.150Z,1520553304.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:04.550Z,1520553304.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:04.955Z,1520553304.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:05.350Z,1520553305.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:05.754Z,1520553305.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:06.154Z,1520553306.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:06.555Z,1520553306.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:06.954Z,1520553306.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:07.359Z,1520553307.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:07.755Z,1520553307.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:08.156Z,1520553308.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:08.562Z,1520553308.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:08.947Z,1520553308.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:09.354Z,1520553309.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:09.745Z,1520553309.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:10.147Z,1520553310.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:10.559Z,1520553310.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:10.958Z,1520553310.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:11.347Z,1520553311.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:11.750Z,1520553311.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:12.150Z,1520553312.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:12.547Z,1520553312.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:12.950Z,1520553312.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:13.350Z,1520553313.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:13.749Z,1520553313.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:14.156Z,1520553314.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:14.551Z,1520553314.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:14.943Z,1520553314.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:15.350Z,1520553315.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:15.750Z,1520553315.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:16.147Z,1520553316.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:16.550Z,1520553316.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:16.958Z,1520553316.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:17.353Z,1520553317.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:17.758Z,1520553317.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:18.158Z,1520553318.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:18.558Z,1520553318.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:18.959Z,1520553318.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:19.358Z,1520553319.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:19.756Z,1520553319.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:20.158Z,1520553320.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:20.561Z,1520553320.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:20.956Z,1520553320.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:21.358Z,1520553321.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:21.761Z,1520553321.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:22.155Z,1520553322.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:22.558Z,1520553322.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:22.962Z,1520553322.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:23.354Z,1520553323.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:23.758Z,1520553323.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:24.153Z,1520553324.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:24.559Z,1520553324.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:24.958Z,1520553324.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:25.358Z,1520553325.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:25.756Z,1520553325.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:26.153Z,1520553326.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:26.562Z,1520553326.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:26.955Z,1520553326.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:27.358Z,1520553327.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:27.758Z,1520553327.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:28.153Z,1520553328.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:28.559Z,1520553328.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:28.955Z,1520553328.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:29.356Z,1520553329.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:29.757Z,1520553329.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:30.155Z,1520553330.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:30.563Z,1520553330.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:33.821Z,1520553333.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:33.931Z,1520553333.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:34.335Z,1520553334.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:34.727Z,1520553334.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:35.138Z,1520553335.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:35.534Z,1520553335.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:35.929Z,1520553335.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:36.331Z,1520553336.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:36.726Z,1520553336.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:37.134Z,1520553337.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:37.531Z,1520553337.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:37.942Z,1520553337.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:38.329Z,1520553338.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:38.729Z,1520553338.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:39.134Z,1520553339.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:39.537Z,1520553339.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:39.939Z,1520553339.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:40.346Z,1520553340.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:40.722Z,1520553340.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:41.136Z,1520553341.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:41.526Z,1520553341.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:41.928Z,1520553341.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:42.328Z,1520553342.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:42.757Z,1520553342.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:43.128Z,1520553343.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:43.530Z,1520553343.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:43.927Z,1520553343.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:44.326Z,1520553344.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:44.731Z,1520553344.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:45.182Z,1520553345.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:45.536Z,1520553345.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:45.934Z,1520553345.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:46.334Z,1520553346.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:46.729Z,1520553346.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:47.132Z,1520553347.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:47.526Z,1520553347.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:47.923Z,1520553347.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:48.326Z,1520553348.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:48.727Z,1520553348.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:49.123Z,1520553349.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:49.526Z,1520553349.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:49.926Z,1520553349.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:50.322Z,1520553350.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:50.750Z,1520553350.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:51.126Z,1520553351.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:51.525Z,1520553351.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:51.926Z,1520553351.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:52.326Z,1520553352.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:52.726Z,1520553352.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:53.126Z,1520553353.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:53.531Z,1520553353.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:53.919Z,1520553353.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:54.326Z,1520553354.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:54.745Z,1520553354.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:55.118Z,1520553355.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:55.526Z,1520553355.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:55.926Z,1520553355.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:56.328Z,1520553356.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:56.734Z,1520553356.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:57.138Z,1520553357.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:57.532Z,1520553357.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:57.930Z,1520553357.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:58.345Z,1520553358.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:58.729Z,1520553358.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:59.129Z,1520553359.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:59.535Z,1520553359.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:55:59.933Z,1520553359.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:00.329Z,1520553360.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:00.753Z,1520553360.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:01.127Z,1520553361.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:01.537Z,1520553361.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:01.942Z,1520553361.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:02.326Z,1520553362.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:02.737Z,1520553362.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:03.139Z,1520553363.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:03.527Z,1520553363.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:03.920Z,1520553363.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:04.344Z,1520553364.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:04.727Z,1520553364.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:05.127Z,1520553365.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:05.527Z,1520553365.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:05.927Z,1520553365.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:06.325Z,1520553366.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:06.727Z,1520553366.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:07.130Z,1520553367.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:07.523Z,1520553367.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:07.940Z,1520553367.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:08.329Z,1520553368.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:08.732Z,1520553368.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:09.129Z,1520553369.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:09.537Z,1520553369.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:09.931Z,1520553369.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:10.338Z,1520553370.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:10.735Z,1520553370.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:11.135Z,1520553371.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:11.542Z,1520553371.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:11.934Z,1520553371.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:12.334Z,1520553372.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:12.729Z,1520553372.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:13.126Z,1520553373.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:13.526Z,1520553373.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:13.926Z,1520553373.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:14.326Z,1520553374.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:14.720Z,1520553374.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:15.126Z,1520553375.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:15.527Z,1520553375.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:15.923Z,1520553375.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:16.338Z,1520553376.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:16.722Z,1520553376.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:17.126Z,1520553377.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:17.531Z,1520553377.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:17.926Z,1520553377.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:18.327Z,1520553378.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:18.771Z,1520553378.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:19.123Z,1520553379.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:19.534Z,1520553379.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:19.931Z,1520553379.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:20.334Z,1520553380.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:20.729Z,1520553380.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:21.132Z,1520553381.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:21.530Z,1520553381.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:21.922Z,1520553381.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:22.329Z,1520553382.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:22.722Z,1520553382.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:23.123Z,1520553383.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:23.163Z,1520553383.163 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:56:23.163Z,1520553383.163 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-08T23:56:23.163Z,1520553383.163 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T23:56:23.188Z,1520553383.188 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T23:56:23.526Z,1520553383.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:23.596Z,1520553383.596 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T23:56:23.596Z,1520553383.596 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-08T23:56:23.934Z,1520553383.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:23.979Z,1520553383.979 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T23:56:23.980Z,1520553383.980 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T23:56:23.980Z,1520553383.980 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T23:56:24.327Z,1520553384.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:24.735Z,1520553384.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:25.132Z,1520553385.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:25.533Z,1520553385.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:25.933Z,1520553385.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:26.330Z,1520553386.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:26.732Z,1520553386.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:27.144Z,1520553387.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:27.534Z,1520553387.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:27.932Z,1520553387.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:28.328Z,1520553388.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:28.738Z,1520553388.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:29.123Z,1520553389.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:29.530Z,1520553389.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:29.923Z,1520553389.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:30.326Z,1520553390.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:30.730Z,1520553390.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:34.057Z,1520553394.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:34.174Z,1520553394.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:34.586Z,1520553394.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:34.982Z,1520553394.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:35.382Z,1520553395.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:35.780Z,1520553395.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:36.181Z,1520553396.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:36.579Z,1520553396.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:36.981Z,1520553396.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:37.385Z,1520553397.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:37.779Z,1520553397.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:38.188Z,1520553398.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:38.579Z,1520553398.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:38.983Z,1520553398.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:39.390Z,1520553399.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:39.787Z,1520553399.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:40.178Z,1520553400.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:40.590Z,1520553400.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:40.982Z,1520553400.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:41.368Z,1520553401.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:41.788Z,1520553401.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:42.170Z,1520553402.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:42.570Z,1520553402.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:42.974Z,1520553402.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:43.370Z,1520553403.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:43.772Z,1520553403.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:44.178Z,1520553404.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:44.575Z,1520553404.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:44.974Z,1520553404.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:45.374Z,1520553405.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:45.774Z,1520553405.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:46.170Z,1520553406.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:46.575Z,1520553406.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:46.979Z,1520553406.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:47.375Z,1520553407.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:47.786Z,1520553407.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:48.179Z,1520553408.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:48.578Z,1520553408.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:48.980Z,1520553408.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:49.383Z,1520553409.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:49.778Z,1520553409.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:50.179Z,1520553410.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:50.586Z,1520553410.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:50.971Z,1520553410.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:51.377Z,1520553411.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:51.783Z,1520553411.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:52.172Z,1520553412.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:52.591Z,1520553412.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:52.970Z,1520553412.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:53.370Z,1520553413.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:53.790Z,1520553413.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:54.181Z,1520553414.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:54.570Z,1520553414.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:54.989Z,1520553414.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:55.370Z,1520553415.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:55.769Z,1520553415.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:56.178Z,1520553416.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:56.570Z,1520553416.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:56.972Z,1520553416.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:57.374Z,1520553417.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:57.786Z,1520553417.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:58.172Z,1520553418.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:58.574Z,1520553418.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:58.975Z,1520553418.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:59.374Z,1520553419.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:56:59.791Z,1520553419.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:00.170Z,1520553420.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:00.574Z,1520553420.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:00.983Z,1520553420.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:01.374Z,1520553421.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:01.772Z,1520553421.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:02.174Z,1520553422.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:02.574Z,1520553422.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:02.971Z,1520553422.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:03.382Z,1520553423.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:03.781Z,1520553423.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:04.174Z,1520553424.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:04.586Z,1520553424.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:04.978Z,1520553424.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:05.382Z,1520553425.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:05.782Z,1520553425.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:06.183Z,1520553426.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:06.583Z,1520553426.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:06.979Z,1520553426.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:07.379Z,1520553427.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:07.780Z,1520553427.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:08.183Z,1520553428.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:08.588Z,1520553428.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:08.980Z,1520553428.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:09.382Z,1520553429.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:09.779Z,1520553429.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:10.167Z,1520553430.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:10.583Z,1520553430.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:10.989Z,1520553430.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:11.380Z,1520553431.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:11.782Z,1520553431.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:12.183Z,1520553432.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:12.586Z,1520553432.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:12.991Z,1520553432.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:13.383Z,1520553433.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:13.767Z,1520553433.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:14.183Z,1520553434.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:14.570Z,1520553434.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:14.970Z,1520553434.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:15.384Z,1520553435.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:15.786Z,1520553435.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:16.171Z,1520553436.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:16.582Z,1520553436.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:16.987Z,1520553436.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:17.370Z,1520553437.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:17.782Z,1520553437.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:18.187Z,1520553438.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:18.586Z,1520553438.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:18.994Z,1520553438.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:19.386Z,1520553439.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:19.784Z,1520553439.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:20.183Z,1520553440.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:20.570Z,1520553440.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:20.970Z,1520553440.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:21.374Z,1520553441.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:21.774Z,1520553441.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:22.170Z,1520553442.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:22.574Z,1520553442.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:22.986Z,1520553442.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:23.371Z,1520553443.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:23.774Z,1520553443.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:24.186Z,1520553444.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:24.574Z,1520553444.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:24.975Z,1520553444.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:25.373Z,1520553445.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:25.774Z,1520553445.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:26.174Z,1520553446.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:26.594Z,1520553446.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:26.970Z,1520553446.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:27.374Z,1520553447.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:27.774Z,1520553447.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:28.170Z,1520553448.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:28.578Z,1520553448.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:28.974Z,1520553448.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:29.371Z,1520553449.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:29.771Z,1520553449.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:30.178Z,1520553450.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:30.576Z,1520553450.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:30.981Z,1520553450.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:34.267Z,1520553454.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:34.379Z,1520553454.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:34.739Z,1520553454.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:35.135Z,1520553455.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:35.538Z,1520553455.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:35.935Z,1520553455.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:36.342Z,1520553456.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:36.731Z,1520553456.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:37.134Z,1520553457.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:37.537Z,1520553457.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:37.932Z,1520553457.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:38.339Z,1520553458.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:38.743Z,1520553458.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:39.136Z,1520553459.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:39.538Z,1520553459.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:39.941Z,1520553459.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:40.338Z,1520553460.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:40.738Z,1520553460.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:41.141Z,1520553461.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:41.538Z,1520553461.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:41.951Z,1520553461.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:42.342Z,1520553462.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:42.732Z,1520553462.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:43.131Z,1520553463.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:43.534Z,1520553463.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:43.927Z,1520553463.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:44.330Z,1520553464.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:44.730Z,1520553464.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:45.135Z,1520553465.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:45.536Z,1520553465.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:45.945Z,1520553465.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:46.337Z,1520553466.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:46.746Z,1520553466.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:47.139Z,1520553467.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:47.538Z,1520553467.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:47.949Z,1520553467.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:48.342Z,1520553468.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:48.738Z,1520553468.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:49.149Z,1520553469.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:49.542Z,1520553469.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:49.927Z,1520553469.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:50.334Z,1520553470.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:50.728Z,1520553470.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:51.134Z,1520553471.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:51.530Z,1520553471.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:51.934Z,1520553471.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:52.326Z,1520553472.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:52.729Z,1520553472.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:53.137Z,1520553473.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:53.538Z,1520553473.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:53.940Z,1520553473.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:54.356Z,1520553474.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:54.737Z,1520553474.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:55.138Z,1520553475.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:55.533Z,1520553475.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:55.938Z,1520553475.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:56.336Z,1520553476.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:56.739Z,1520553476.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:57.138Z,1520553477.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:57.541Z,1520553477.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:57.931Z,1520553477.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:58.344Z,1520553478.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:58.740Z,1520553478.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:59.123Z,1520553479.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:59.534Z,1520553479.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:57:59.934Z,1520553479.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:00.330Z,1520553480.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:00.730Z,1520553480.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:01.130Z,1520553481.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:01.534Z,1520553481.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:01.930Z,1520553481.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:02.331Z,1520553482.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:02.731Z,1520553482.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:03.130Z,1520553483.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:03.535Z,1520553483.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:03.935Z,1520553483.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:04.334Z,1520553484.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:04.738Z,1520553484.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:05.134Z,1520553485.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:05.536Z,1520553485.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:05.938Z,1520553485.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:06.334Z,1520553486.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:06.738Z,1520553486.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:07.150Z,1520553487.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:07.526Z,1520553487.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:07.930Z,1520553487.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:08.353Z,1520553488.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:08.727Z,1520553488.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:09.131Z,1520553489.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:09.553Z,1520553489.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:09.927Z,1520553489.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:10.330Z,1520553490.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:10.730Z,1520553490.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:11.126Z,1520553491.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:11.530Z,1520553491.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:11.930Z,1520553491.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:12.327Z,1520553492.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:12.730Z,1520553492.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:13.135Z,1520553493.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:13.534Z,1520553493.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:13.946Z,1520553493.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:14.339Z,1520553494.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:14.738Z,1520553494.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:15.132Z,1520553495.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:15.530Z,1520553495.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:15.927Z,1520553495.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:16.330Z,1520553496.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:16.730Z,1520553496.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:17.133Z,1520553497.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:17.535Z,1520553497.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:17.934Z,1520553497.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:18.327Z,1520553498.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:18.730Z,1520553498.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:19.130Z,1520553499.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:19.564Z,1520553499.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:19.932Z,1520553499.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:20.331Z,1520553500.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:20.732Z,1520553500.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:21.132Z,1520553501.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:21.531Z,1520553501.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:21.931Z,1520553501.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:22.339Z,1520553502.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:22.732Z,1520553502.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:23.131Z,1520553503.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:23.540Z,1520553503.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:23.932Z,1520553503.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:24.331Z,1520553504.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:24.732Z,1520553504.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:25.140Z,1520553505.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:25.539Z,1520553505.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:25.939Z,1520553505.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:26.347Z,1520553506.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:26.734Z,1520553506.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:27.138Z,1520553507.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:27.539Z,1520553507.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:27.934Z,1520553507.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:28.343Z,1520553508.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:28.747Z,1520553508.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:29.126Z,1520553509.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:29.530Z,1520553509.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:29.949Z,1520553509.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:30.329Z,1520553510.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:30.368Z,1520553510.368 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-08T23:58:30.368Z,1520553510.368 [Default:CheckIn:C.Wait] Stopped
2018-03-08T23:58:30.369Z,1520553510.369 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-08T23:58:30.369Z,1520553510.369 [Default:CheckIn:D] Running Loop=1
2018-03-08T23:58:30.730Z,1520553510.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:30.774Z,1520553510.774 [Default:CheckIn:D] Stopped
2018-03-08T23:58:30.774Z,1520553510.774 [Default:CheckIn:E] Running Loop=1
2018-03-08T23:58:31.130Z,1520553511.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:31.162Z,1520553511.162 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 972.766146 min 
2018-03-08T23:58:31.162Z,1520553511.162 [Default:CheckIn:E] Stopped
2018-03-08T23:58:31.162Z,1520553511.162 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-08T23:58:31.162Z,1520553511.162 [Default:CheckIn] Stopped
2018-03-08T23:58:31.162Z,1520553511.162 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-08T23:58:31.162Z,1520553511.162 [Default:CheckIn](INFO): Running loop #97
2018-03-08T23:58:31.162Z,1520553511.162 [Default:CheckIn] Running Loop=97
2018-03-08T23:58:31.163Z,1520553511.163 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-08T23:58:31.163Z,1520553511.163 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-08T23:58:34.319Z,1520553514.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:34.423Z,1520553514.423 [NAL9602](INFO): Powering up
2018-03-08T23:58:34.444Z,1520553514.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:34.826Z,1520553514.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:35.210Z,1520553515.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:35.630Z,1520553515.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:36.026Z,1520553516.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:36.415Z,1520553516.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:36.819Z,1520553516.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:37.217Z,1520553517.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:37.618Z,1520553517.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:38.018Z,1520553518.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:38.418Z,1520553518.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:38.806Z,1520553518.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:39.222Z,1520553519.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:39.631Z,1520553519.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:40.010Z,1520553520.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:40.414Z,1520553520.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:40.825Z,1520553520.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:41.210Z,1520553521.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:41.621Z,1520553521.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:42.017Z,1520553522.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:42.411Z,1520553522.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:42.811Z,1520553522.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:43.216Z,1520553523.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:43.618Z,1520553523.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:44.019Z,1520553524.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:44.424Z,1520553524.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:44.820Z,1520553524.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:45.225Z,1520553525.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:45.598Z,1520553525.598 [NAL9602](INFO): NAL9602 initialized
2018-03-08T23:58:45.615Z,1520553525.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:46.011Z,1520553526.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:46.435Z,1520553526.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:46.834Z,1520553526.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:47.235Z,1520553527.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:47.614Z,1520553527.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:48.010Z,1520553528.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:48.410Z,1520553528.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:48.816Z,1520553528.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:49.226Z,1520553529.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:49.617Z,1520553529.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:50.017Z,1520553530.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:50.426Z,1520553530.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:50.809Z,1520553530.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:51.208Z,1520553531.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:51.610Z,1520553531.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:52.010Z,1520553532.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:52.418Z,1520553532.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:52.816Z,1520553532.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:53.228Z,1520553533.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:53.615Z,1520553533.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:54.017Z,1520553534.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:54.422Z,1520553534.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:54.817Z,1520553534.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:55.225Z,1520553535.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:55.622Z,1520553535.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:56.010Z,1520553536.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:56.414Z,1520553536.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:56.810Z,1520553536.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:57.215Z,1520553537.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:57.632Z,1520553537.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:58.033Z,1520553538.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:58.417Z,1520553538.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:58.814Z,1520553538.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:59.221Z,1520553539.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:58:59.620Z,1520553539.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:00.025Z,1520553540.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:00.410Z,1520553540.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:00.808Z,1520553540.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:01.210Z,1520553541.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:01.630Z,1520553541.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:02.034Z,1520553542.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:02.410Z,1520553542.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:02.849Z,1520553542.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:03.208Z,1520553543.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:03.613Z,1520553543.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:04.009Z,1520553544.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:04.410Z,1520553544.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:04.810Z,1520553544.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:05.214Z,1520553545.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:05.615Z,1520553545.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:06.021Z,1520553546.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:06.418Z,1520553546.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:06.808Z,1520553546.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:07.210Z,1520553547.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:07.610Z,1520553547.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:08.008Z,1520553548.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:08.410Z,1520553548.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:08.810Z,1520553548.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:09.210Z,1520553549.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:09.616Z,1520553549.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:10.014Z,1520553550.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:10.415Z,1520553550.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:10.819Z,1520553550.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:11.217Z,1520553551.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:11.620Z,1520553551.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:12.010Z,1520553552.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:12.422Z,1520553552.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:12.808Z,1520553552.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:13.225Z,1520553553.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:13.619Z,1520553553.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:14.016Z,1520553554.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:14.422Z,1520553554.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:14.821Z,1520553554.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:15.217Z,1520553555.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:15.617Z,1520553555.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:16.018Z,1520553556.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:16.420Z,1520553556.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:16.817Z,1520553556.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:17.218Z,1520553557.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:17.624Z,1520553557.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:18.020Z,1520553558.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:18.411Z,1520553558.411 [NAL9602](INFO): SBD MO Status=0, MOMSN=4902, MT Status=0, MTMSN=0
2018-03-08T23:59:18.411Z,1520553558.411 [NAL9602](INFO): No messages in MT queue
2018-03-08T23:59:18.448Z,1520553558.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:18.810Z,1520553558.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:19.229Z,1520553559.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:19.604Z,1520553559.604 [NAL9602](INFO): GPS fix at 20180308T235838: (21.316452, -157.875852)
2018-03-08T23:59:19.620Z,1520553559.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:19.673Z,1520553559.673 [Default:CheckIn:Read_GPS] Stopped
2018-03-08T23:59:19.673Z,1520553559.673 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-08T23:59:20.026Z,1520553560.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:20.606Z,1520553560.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:20.946Z,1520553560.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:24.155Z,1520553564.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:24.189Z,1520553564.189 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-08T23:59:24.189Z,1520553564.189 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-08T23:59:24.189Z,1520553564.189 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-08T23:59:24.202Z,1520553564.202 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-08T23:59:24.304Z,1520553564.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:24.357Z,1520553564.357 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-08T23:59:24.357Z,1520553564.357 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-08T23:59:24.617Z,1520553564.617 [DataOverHttps](INFO): Sending 63 bytes from file Logs/20180308T074127/Courier0388.lzma
2018-03-08T23:59:24.646Z,1520553564.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:24.675Z,1520553564.675 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-08T23:59:24.676Z,1520553564.676 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-08T23:59:24.676Z,1520553564.676 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-08T23:59:25.045Z,1520553565.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:25.416Z,1520553565.416 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0388.lzma.bak
2018-03-08T23:59:25.416Z,1520553565.416 [DataOverHttps](INFO): SBD MOMSN=7990296
2018-03-08T23:59:25.455Z,1520553565.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:26.038Z,1520553566.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:26.239Z,1520553566.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:26.646Z,1520553566.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:29.959Z,1520553569.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:30.067Z,1520553570.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:30.465Z,1520553570.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:30.862Z,1520553570.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:31.261Z,1520553571.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:31.660Z,1520553571.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:32.066Z,1520553572.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:35.328Z,1520553575.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:35.446Z,1520553575.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:35.793Z,1520553575.793 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20180308T074127/Express0389.lzma
2018-03-08T23:59:35.828Z,1520553575.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:36.223Z,1520553576.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:36.596Z,1520553576.596 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0389.lzma.bak
2018-03-08T23:59:36.596Z,1520553576.596 [DataOverHttps](INFO): SBD MOMSN=7990299
2018-03-08T23:59:36.642Z,1520553576.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:37.215Z,1520553577.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:37.235Z,1520553577.235 [Default:CheckIn:Read_Iridium] Stopped
2018-03-08T23:59:37.235Z,1520553577.235 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-08T23:59:37.235Z,1520553577.235 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-08T23:59:37.418Z,1520553577.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:37.827Z,1520553577.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:40.997Z,1520553580.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:41.112Z,1520553581.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:41.509Z,1520553581.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:41.898Z,1520553581.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:42.306Z,1520553582.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:42.692Z,1520553582.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:43.092Z,1520553583.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:43.501Z,1520553583.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:43.894Z,1520553583.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:44.297Z,1520553584.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:44.696Z,1520553584.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:45.125Z,1520553585.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:45.494Z,1520553585.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:45.894Z,1520553585.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:46.291Z,1520553586.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:46.689Z,1520553586.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:47.095Z,1520553587.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:47.494Z,1520553587.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:47.901Z,1520553587.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:48.302Z,1520553588.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:48.745Z,1520553588.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:49.086Z,1520553589.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:49.486Z,1520553589.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:49.915Z,1520553589.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:50.303Z,1520553590.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:50.686Z,1520553590.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:51.094Z,1520553591.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:51.486Z,1520553591.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:51.886Z,1520553591.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:52.290Z,1520553592.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:52.686Z,1520553592.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:53.087Z,1520553593.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:53.490Z,1520553593.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:53.886Z,1520553593.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:54.274Z,1520553594.274 [NAL9602](INFO): Powering down
2018-03-08T23:59:54.292Z,1520553594.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:54.692Z,1520553594.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:55.098Z,1520553595.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:55.498Z,1520553595.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:55.898Z,1520553595.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:56.298Z,1520553596.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:56.702Z,1520553596.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:57.096Z,1520553597.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:57.498Z,1520553597.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:57.893Z,1520553597.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:58.310Z,1520553598.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:58.689Z,1520553598.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:59.086Z,1520553599.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:59.490Z,1520553599.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-08T23:59:59.903Z,1520553599.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:00.286Z,1520553600.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:00.710Z,1520553600.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:01.086Z,1520553601.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:01.483Z,1520553601.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:01.911Z,1520553601.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:02.290Z,1520553602.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:02.690Z,1520553602.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:03.090Z,1520553603.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:03.486Z,1520553603.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:03.887Z,1520553603.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:04.290Z,1520553604.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:04.695Z,1520553604.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:05.091Z,1520553605.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:05.495Z,1520553605.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:05.899Z,1520553605.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:06.298Z,1520553606.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:06.693Z,1520553606.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:07.102Z,1520553607.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:07.495Z,1520553607.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:07.892Z,1520553607.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:08.286Z,1520553608.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:08.699Z,1520553608.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:09.093Z,1520553609.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:09.491Z,1520553609.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:09.886Z,1520553609.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:10.291Z,1520553610.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:10.690Z,1520553610.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:11.086Z,1520553611.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:11.491Z,1520553611.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:11.894Z,1520553611.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:12.286Z,1520553612.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:12.694Z,1520553612.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:13.090Z,1520553613.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:13.486Z,1520553613.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:13.895Z,1520553613.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:14.298Z,1520553614.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:14.699Z,1520553614.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:15.099Z,1520553615.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:15.498Z,1520553615.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:15.895Z,1520553615.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:16.309Z,1520553616.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:16.698Z,1520553616.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:17.096Z,1520553617.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:17.507Z,1520553617.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:17.899Z,1520553617.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:18.298Z,1520553618.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:18.697Z,1520553618.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:19.099Z,1520553619.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:19.488Z,1520553619.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:19.895Z,1520553619.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:20.299Z,1520553620.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:20.704Z,1520553620.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:21.091Z,1520553621.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:21.486Z,1520553621.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:21.889Z,1520553621.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:22.290Z,1520553622.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:22.690Z,1520553622.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:23.090Z,1520553623.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:23.512Z,1520553623.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:23.906Z,1520553623.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:24.304Z,1520553624.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:24.691Z,1520553624.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:25.091Z,1520553625.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:25.487Z,1520553625.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:25.891Z,1520553625.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:26.290Z,1520553626.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:26.691Z,1520553626.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:27.095Z,1520553627.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:27.502Z,1520553627.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:27.891Z,1520553627.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:28.297Z,1520553628.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:28.697Z,1520553628.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:29.098Z,1520553629.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:29.497Z,1520553629.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:29.899Z,1520553629.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:30.297Z,1520553630.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:30.699Z,1520553630.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:31.098Z,1520553631.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:31.490Z,1520553631.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:31.890Z,1520553631.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:32.290Z,1520553632.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:32.695Z,1520553632.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:33.090Z,1520553633.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:33.490Z,1520553633.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:33.886Z,1520553633.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:34.286Z,1520553634.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:34.694Z,1520553634.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:35.082Z,1520553635.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:35.494Z,1520553635.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:35.890Z,1520553635.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:36.286Z,1520553636.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:36.690Z,1520553636.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:37.090Z,1520553637.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:37.495Z,1520553637.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:37.898Z,1520553637.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:41.070Z,1520553641.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:41.189Z,1520553641.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:41.547Z,1520553641.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:41.943Z,1520553641.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:42.343Z,1520553642.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:42.754Z,1520553642.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:43.145Z,1520553643.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:43.543Z,1520553643.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:43.951Z,1520553643.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:44.346Z,1520553644.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:44.742Z,1520553644.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:45.153Z,1520553645.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:45.545Z,1520553645.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:45.931Z,1520553645.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:46.343Z,1520553646.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:46.742Z,1520553646.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:47.127Z,1520553647.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:47.552Z,1520553647.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:47.934Z,1520553647.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:48.348Z,1520553648.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:48.734Z,1520553648.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:49.147Z,1520553649.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:49.534Z,1520553649.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:49.934Z,1520553649.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:50.355Z,1520553650.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:50.730Z,1520553650.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:51.135Z,1520553651.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:51.534Z,1520553651.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:51.930Z,1520553651.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:52.346Z,1520553652.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:52.746Z,1520553652.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:53.135Z,1520553653.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:53.534Z,1520553653.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:53.938Z,1520553653.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:54.329Z,1520553654.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:54.734Z,1520553654.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:55.138Z,1520553655.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:55.530Z,1520553655.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:55.935Z,1520553655.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:56.357Z,1520553656.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:56.734Z,1520553656.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:57.154Z,1520553657.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:57.534Z,1520553657.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:57.930Z,1520553657.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:58.334Z,1520553658.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:58.738Z,1520553658.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:59.134Z,1520553659.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:59.534Z,1520553659.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:00:59.938Z,1520553659.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:00.334Z,1520553660.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:00.741Z,1520553660.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:01.140Z,1520553661.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:01.533Z,1520553661.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:01.939Z,1520553661.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:02.341Z,1520553662.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:02.749Z,1520553662.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:03.143Z,1520553663.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:03.547Z,1520553663.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:03.943Z,1520553663.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:04.356Z,1520553664.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:04.750Z,1520553664.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:05.131Z,1520553665.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:05.546Z,1520553665.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:05.931Z,1520553665.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:06.330Z,1520553666.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:06.749Z,1520553666.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:07.131Z,1520553667.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:07.547Z,1520553667.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:07.946Z,1520553667.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:08.330Z,1520553668.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:08.730Z,1520553668.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:09.134Z,1520553669.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:09.532Z,1520553669.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:09.934Z,1520553669.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:10.334Z,1520553670.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:10.734Z,1520553670.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:11.134Z,1520553671.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:11.554Z,1520553671.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:11.931Z,1520553671.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:12.334Z,1520553672.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:12.734Z,1520553672.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:13.131Z,1520553673.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:13.530Z,1520553673.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:13.934Z,1520553673.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:14.339Z,1520553674.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:14.733Z,1520553674.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:15.134Z,1520553675.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:15.531Z,1520553675.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:15.939Z,1520553675.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:16.342Z,1520553676.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:16.743Z,1520553676.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:17.140Z,1520553677.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:17.542Z,1520553677.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:17.938Z,1520553677.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:18.342Z,1520553678.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:18.741Z,1520553678.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:19.142Z,1520553679.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:19.537Z,1520553679.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:19.953Z,1520553679.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:20.346Z,1520553680.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:20.746Z,1520553680.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:21.147Z,1520553681.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:21.531Z,1520553681.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:21.947Z,1520553681.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:22.334Z,1520553682.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:22.727Z,1520553682.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:23.146Z,1520553683.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:23.533Z,1520553683.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:23.932Z,1520553683.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:24.354Z,1520553684.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:24.754Z,1520553684.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:25.131Z,1520553685.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:25.546Z,1520553685.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:25.955Z,1520553685.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:26.346Z,1520553686.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:26.745Z,1520553686.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:27.134Z,1520553687.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:27.528Z,1520553687.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:27.945Z,1520553687.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:28.334Z,1520553688.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:28.746Z,1520553688.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:29.134Z,1520553689.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:29.534Z,1520553689.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:29.931Z,1520553689.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:30.334Z,1520553690.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:30.735Z,1520553690.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:31.134Z,1520553691.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:31.538Z,1520553691.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:31.942Z,1520553691.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:32.334Z,1520553692.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:32.739Z,1520553692.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:33.139Z,1520553693.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:33.540Z,1520553693.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:33.940Z,1520553693.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:34.342Z,1520553694.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:34.738Z,1520553694.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:35.146Z,1520553695.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:35.539Z,1520553695.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:35.931Z,1520553695.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:36.341Z,1520553696.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:36.737Z,1520553696.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:37.142Z,1520553697.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:37.541Z,1520553697.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:37.956Z,1520553697.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:41.379Z,1520553701.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:41.501Z,1520553701.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:41.870Z,1520553701.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:42.263Z,1520553702.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:42.660Z,1520553702.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:43.054Z,1520553703.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:43.451Z,1520553703.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:43.871Z,1520553703.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:44.265Z,1520553704.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:44.719Z,1520553704.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:45.063Z,1520553705.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:45.462Z,1520553705.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:45.863Z,1520553705.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:46.262Z,1520553706.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:46.674Z,1520553706.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:47.062Z,1520553707.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:47.459Z,1520553707.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:47.862Z,1520553707.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:48.258Z,1520553708.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:48.663Z,1520553708.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:49.071Z,1520553709.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:49.446Z,1520553709.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:49.858Z,1520553709.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:50.262Z,1520553710.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:50.662Z,1520553710.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:51.062Z,1520553711.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:51.470Z,1520553711.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:51.862Z,1520553711.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:52.262Z,1520553712.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:52.657Z,1520553712.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:53.062Z,1520553713.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:53.472Z,1520553713.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:53.862Z,1520553713.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:54.266Z,1520553714.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:54.666Z,1520553714.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:55.063Z,1520553715.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:55.450Z,1520553715.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:55.858Z,1520553715.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:56.258Z,1520553716.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:56.658Z,1520553716.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:57.058Z,1520553717.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:57.454Z,1520553717.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:57.854Z,1520553717.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:58.259Z,1520553718.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:58.659Z,1520553718.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:59.055Z,1520553719.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:59.459Z,1520553719.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:01:59.863Z,1520553719.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:00.258Z,1520553720.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:00.663Z,1520553720.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:01.069Z,1520553721.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:01.462Z,1520553721.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:01.866Z,1520553721.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:02.261Z,1520553722.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:02.662Z,1520553722.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:03.060Z,1520553723.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:03.466Z,1520553723.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:03.862Z,1520553723.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:04.266Z,1520553724.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:04.662Z,1520553724.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:05.058Z,1520553725.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:05.462Z,1520553725.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:05.498Z,1520553725.498 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-09T00:02:05.871Z,1520553725.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:06.262Z,1520553726.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:06.657Z,1520553726.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:07.074Z,1520553727.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:07.458Z,1520553727.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:07.859Z,1520553727.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:08.254Z,1520553728.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:08.654Z,1520553728.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:09.058Z,1520553729.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:09.454Z,1520553729.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:09.849Z,1520553729.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:10.254Z,1520553730.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:10.657Z,1520553730.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:11.055Z,1520553731.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:11.455Z,1520553731.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:11.855Z,1520553731.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:12.255Z,1520553732.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:12.659Z,1520553732.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:13.112Z,1520553733.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:13.455Z,1520553733.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:13.851Z,1520553733.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:14.257Z,1520553734.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:14.655Z,1520553734.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:15.054Z,1520553735.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:15.460Z,1520553735.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:15.871Z,1520553735.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:16.255Z,1520553736.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:16.662Z,1520553736.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:17.062Z,1520553737.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:17.459Z,1520553737.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:17.859Z,1520553737.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:18.262Z,1520553738.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:18.657Z,1520553738.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:19.069Z,1520553739.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:19.463Z,1520553739.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:19.865Z,1520553739.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:20.261Z,1520553740.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:20.662Z,1520553740.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:21.059Z,1520553741.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:21.461Z,1520553741.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:21.862Z,1520553741.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:22.267Z,1520553742.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:22.662Z,1520553742.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:23.062Z,1520553743.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:23.459Z,1520553743.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:23.857Z,1520553743.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:24.267Z,1520553744.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:24.666Z,1520553744.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:24.685Z,1520553744.685 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T00:02:24.685Z,1520553744.685 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-09T00:02:24.685Z,1520553744.685 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T00:02:24.697Z,1520553744.697 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T00:02:25.074Z,1520553745.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:25.103Z,1520553745.103 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T00:02:25.103Z,1520553745.103 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-09T00:02:25.450Z,1520553745.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:25.485Z,1520553745.485 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T00:02:25.485Z,1520553745.485 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T00:02:25.486Z,1520553745.486 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T00:02:25.854Z,1520553745.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:26.275Z,1520553746.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:26.650Z,1520553746.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:27.051Z,1520553747.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:27.453Z,1520553747.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:27.858Z,1520553747.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:28.254Z,1520553748.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:28.658Z,1520553748.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:29.062Z,1520553749.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:29.454Z,1520553749.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:29.866Z,1520553749.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:30.258Z,1520553750.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:30.662Z,1520553750.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:31.062Z,1520553751.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:31.461Z,1520553751.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:31.862Z,1520553751.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:32.262Z,1520553752.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:32.662Z,1520553752.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:33.059Z,1520553753.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:33.462Z,1520553753.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:33.862Z,1520553753.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:34.262Z,1520553754.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:34.666Z,1520553754.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:35.062Z,1520553755.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:35.459Z,1520553755.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:35.860Z,1520553755.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:36.266Z,1520553756.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:36.660Z,1520553756.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:37.056Z,1520553757.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:37.466Z,1520553757.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:37.866Z,1520553757.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:38.257Z,1520553758.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:41.535Z,1520553761.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:41.649Z,1520553761.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:42.047Z,1520553762.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:42.446Z,1520553762.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:42.849Z,1520553762.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:43.244Z,1520553763.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:43.646Z,1520553763.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:44.043Z,1520553764.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:44.445Z,1520553764.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:44.838Z,1520553764.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:45.235Z,1520553765.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:45.638Z,1520553765.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:46.038Z,1520553766.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:46.435Z,1520553766.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:46.838Z,1520553766.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:47.242Z,1520553767.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:47.642Z,1520553767.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:48.046Z,1520553768.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:48.442Z,1520553768.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:48.847Z,1520553768.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:49.246Z,1520553769.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:49.650Z,1520553769.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:50.044Z,1520553770.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:50.446Z,1520553770.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:50.846Z,1520553770.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:51.246Z,1520553771.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:51.641Z,1520553771.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:52.050Z,1520553772.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:52.443Z,1520553772.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:52.840Z,1520553772.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:53.238Z,1520553773.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:53.638Z,1520553773.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:54.039Z,1520553774.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:54.438Z,1520553774.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:54.842Z,1520553774.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:55.238Z,1520553775.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:55.638Z,1520553775.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:56.039Z,1520553776.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:56.440Z,1520553776.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:56.850Z,1520553776.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:57.235Z,1520553777.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:57.641Z,1520553777.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:58.038Z,1520553778.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:58.438Z,1520553778.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:58.843Z,1520553778.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:59.241Z,1520553779.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:02:59.642Z,1520553779.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:00.038Z,1520553780.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:00.438Z,1520553780.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:00.843Z,1520553780.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:01.238Z,1520553781.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:01.642Z,1520553781.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:02.035Z,1520553782.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:02.438Z,1520553782.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:02.842Z,1520553782.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:03.238Z,1520553783.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:03.641Z,1520553783.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:04.050Z,1520553784.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:04.435Z,1520553784.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:04.838Z,1520553784.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:05.242Z,1520553785.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:05.639Z,1520553785.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:06.042Z,1520553786.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:06.442Z,1520553786.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:06.838Z,1520553786.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:07.239Z,1520553787.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:07.638Z,1520553787.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:08.036Z,1520553788.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:08.443Z,1520553788.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:08.850Z,1520553788.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:09.239Z,1520553789.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:09.651Z,1520553789.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:10.051Z,1520553790.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:10.452Z,1520553790.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:10.842Z,1520553790.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:11.242Z,1520553791.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:11.642Z,1520553791.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:12.038Z,1520553792.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:12.438Z,1520553792.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:12.838Z,1520553792.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:13.239Z,1520553793.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:13.638Z,1520553793.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:14.035Z,1520553794.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:14.442Z,1520553794.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:14.838Z,1520553794.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:15.235Z,1520553795.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:15.643Z,1520553795.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:16.043Z,1520553796.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:16.445Z,1520553796.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:16.838Z,1520553796.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:17.238Z,1520553797.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:17.642Z,1520553797.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:18.038Z,1520553798.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:18.438Z,1520553798.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:18.842Z,1520553798.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:19.238Z,1520553799.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:19.642Z,1520553799.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:20.035Z,1520553800.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:20.437Z,1520553800.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:20.838Z,1520553800.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:21.235Z,1520553801.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:21.643Z,1520553801.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:22.050Z,1520553802.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:22.447Z,1520553802.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:22.849Z,1520553802.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:23.246Z,1520553803.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:23.650Z,1520553803.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:24.038Z,1520553804.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:24.450Z,1520553804.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:24.839Z,1520553804.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:25.238Z,1520553805.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:25.642Z,1520553805.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:26.032Z,1520553806.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:26.438Z,1520553806.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:26.842Z,1520553806.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:27.235Z,1520553807.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:27.639Z,1520553807.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:28.050Z,1520553808.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:28.446Z,1520553808.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:28.846Z,1520553808.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:29.239Z,1520553809.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:29.643Z,1520553809.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:30.045Z,1520553810.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:30.446Z,1520553810.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:30.838Z,1520553810.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:31.238Z,1520553811.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:31.638Z,1520553811.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:32.032Z,1520553812.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:32.442Z,1520553812.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:32.838Z,1520553812.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:33.236Z,1520553813.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:33.638Z,1520553813.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:34.042Z,1520553814.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:34.438Z,1520553814.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:34.838Z,1520553814.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:35.243Z,1520553815.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:35.645Z,1520553815.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:36.042Z,1520553816.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:36.443Z,1520553816.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:36.845Z,1520553816.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:37.246Z,1520553817.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:37.650Z,1520553817.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:38.037Z,1520553818.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:38.442Z,1520553818.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:42.012Z,1520553822.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:42.187Z,1520553822.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:42.552Z,1520553822.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:42.976Z,1520553822.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:43.350Z,1520553823.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:43.754Z,1520553823.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:44.176Z,1520553824.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:44.583Z,1520553824.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:44.950Z,1520553824.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:45.364Z,1520553825.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:45.752Z,1520553825.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:46.158Z,1520553826.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:46.559Z,1520553826.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:46.955Z,1520553826.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:47.358Z,1520553827.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:47.758Z,1520553827.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:48.155Z,1520553828.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:48.557Z,1520553828.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:48.957Z,1520553828.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:49.356Z,1520553829.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:49.756Z,1520553829.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:50.158Z,1520553830.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:50.555Z,1520553830.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:50.959Z,1520553830.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:51.359Z,1520553831.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:51.753Z,1520553831.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:52.158Z,1520553832.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:52.558Z,1520553832.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:52.955Z,1520553832.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:53.358Z,1520553833.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:53.760Z,1520553833.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:54.159Z,1520553834.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:54.558Z,1520553834.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:54.959Z,1520553834.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:55.355Z,1520553835.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:55.759Z,1520553835.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:56.160Z,1520553836.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:56.557Z,1520553836.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:56.966Z,1520553836.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:57.356Z,1520553837.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:57.757Z,1520553837.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:58.155Z,1520553838.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:58.547Z,1520553838.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:58.962Z,1520553838.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:59.354Z,1520553839.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:03:59.764Z,1520553839.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:00.147Z,1520553840.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:00.550Z,1520553840.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:00.954Z,1520553840.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:01.347Z,1520553841.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:01.754Z,1520553841.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:02.150Z,1520553842.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:02.547Z,1520553842.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:02.955Z,1520553842.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:03.350Z,1520553843.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:03.754Z,1520553843.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:04.154Z,1520553844.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:04.550Z,1520553844.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:04.951Z,1520553844.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:05.355Z,1520553845.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:05.758Z,1520553845.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:06.157Z,1520553846.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:06.558Z,1520553846.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:06.958Z,1520553846.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:07.350Z,1520553847.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:07.760Z,1520553847.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:08.155Z,1520553848.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:08.555Z,1520553848.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:08.957Z,1520553848.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:09.355Z,1520553849.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:09.755Z,1520553849.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:10.159Z,1520553850.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:10.558Z,1520553850.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:10.956Z,1520553850.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:11.357Z,1520553851.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:11.758Z,1520553851.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:12.153Z,1520553852.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:12.559Z,1520553852.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:12.962Z,1520553852.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:13.355Z,1520553853.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:13.759Z,1520553853.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:14.162Z,1520553854.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:14.556Z,1520553854.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:14.967Z,1520553854.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:15.362Z,1520553855.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:15.762Z,1520553855.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:16.157Z,1520553856.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:16.558Z,1520553856.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:16.955Z,1520553856.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:17.358Z,1520553857.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:17.758Z,1520553857.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:18.154Z,1520553858.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:18.558Z,1520553858.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:18.958Z,1520553858.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:19.360Z,1520553859.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:19.758Z,1520553859.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:20.158Z,1520553860.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:20.559Z,1520553860.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:20.958Z,1520553860.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:21.357Z,1520553861.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:21.758Z,1520553861.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:22.158Z,1520553862.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:22.562Z,1520553862.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:22.955Z,1520553862.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:23.358Z,1520553863.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:23.762Z,1520553863.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:24.156Z,1520553864.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:24.558Z,1520553864.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:24.959Z,1520553864.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:25.355Z,1520553865.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:25.758Z,1520553865.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:26.160Z,1520553866.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:26.558Z,1520553866.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:26.958Z,1520553866.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:27.367Z,1520553867.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:27.762Z,1520553867.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:28.157Z,1520553868.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:28.562Z,1520553868.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:28.957Z,1520553868.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:29.359Z,1520553869.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:29.753Z,1520553869.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:30.162Z,1520553870.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:30.562Z,1520553870.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:30.951Z,1520553870.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:31.354Z,1520553871.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:31.750Z,1520553871.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:32.149Z,1520553872.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:32.545Z,1520553872.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:32.950Z,1520553872.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:33.354Z,1520553873.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:33.750Z,1520553873.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:34.150Z,1520553874.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:34.553Z,1520553874.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:34.950Z,1520553874.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:35.354Z,1520553875.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:35.755Z,1520553875.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:36.146Z,1520553876.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:36.550Z,1520553876.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:36.948Z,1520553876.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:37.354Z,1520553877.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:37.750Z,1520553877.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:37.770Z,1520553877.770 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-09T00:04:37.771Z,1520553877.771 [Default:CheckIn:C.Wait] Stopped
2018-03-09T00:04:37.771Z,1520553877.771 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-09T00:04:37.771Z,1520553877.771 [Default:CheckIn:D] Running Loop=1
2018-03-09T00:04:38.155Z,1520553878.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:38.194Z,1520553878.194 [Default:CheckIn:D] Stopped
2018-03-09T00:04:38.194Z,1520553878.194 [Default:CheckIn:E] Running Loop=1
2018-03-09T00:04:38.559Z,1520553878.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:38.579Z,1520553878.579 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 978.889844 min 
2018-03-09T00:04:38.580Z,1520553878.580 [Default:CheckIn:E] Stopped
2018-03-09T00:04:38.580Z,1520553878.580 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-09T00:04:38.580Z,1520553878.580 [Default:CheckIn] Stopped
2018-03-09T00:04:38.580Z,1520553878.580 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-09T00:04:38.580Z,1520553878.580 [Default:CheckIn](INFO): Running loop #98
2018-03-09T00:04:38.580Z,1520553878.580 [Default:CheckIn] Running Loop=98
2018-03-09T00:04:38.580Z,1520553878.580 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-09T00:04:38.581Z,1520553878.581 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-09T00:04:41.882Z,1520553881.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:41.987Z,1520553881.987 [NAL9602](INFO): Powering up
2018-03-09T00:04:42.008Z,1520553882.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:42.371Z,1520553882.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:42.767Z,1520553882.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:43.170Z,1520553883.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:43.571Z,1520553883.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:43.966Z,1520553883.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:44.371Z,1520553884.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:44.769Z,1520553884.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:45.167Z,1520553885.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:45.566Z,1520553885.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:45.972Z,1520553885.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:46.371Z,1520553886.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:46.770Z,1520553886.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:47.161Z,1520553887.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:47.563Z,1520553887.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:47.969Z,1520553887.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:48.364Z,1520553888.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:48.758Z,1520553888.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:49.157Z,1520553889.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:49.574Z,1520553889.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:49.955Z,1520553889.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:50.369Z,1520553890.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:50.770Z,1520553890.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:51.159Z,1520553891.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:51.569Z,1520553891.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:51.958Z,1520553891.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:52.358Z,1520553892.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:52.780Z,1520553892.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:53.157Z,1520553893.157 [NAL9602](INFO): NAL9602 initialized
2018-03-09T00:04:53.187Z,1520553893.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:53.558Z,1520553893.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:53.986Z,1520553893.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:54.384Z,1520553894.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:54.777Z,1520553894.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:55.159Z,1520553895.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:55.562Z,1520553895.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:55.976Z,1520553895.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:56.383Z,1520553896.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:56.758Z,1520553896.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:57.162Z,1520553897.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:57.564Z,1520553897.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:57.963Z,1520553897.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:58.362Z,1520553898.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:58.760Z,1520553898.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:59.160Z,1520553899.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:59.563Z,1520553899.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:04:59.959Z,1520553899.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:00.358Z,1520553900.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:00.768Z,1520553900.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:01.169Z,1520553901.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:01.566Z,1520553901.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:01.966Z,1520553901.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:02.370Z,1520553902.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:02.766Z,1520553902.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:03.170Z,1520553903.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:03.565Z,1520553903.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:03.970Z,1520553903.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:04.378Z,1520553904.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:04.772Z,1520553904.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:05.165Z,1520553905.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:05.575Z,1520553905.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:05.969Z,1520553905.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:06.362Z,1520553906.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:06.758Z,1520553906.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:07.156Z,1520553907.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:07.562Z,1520553907.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:07.958Z,1520553907.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:08.354Z,1520553908.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:08.759Z,1520553908.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:09.161Z,1520553909.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:09.556Z,1520553909.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:09.958Z,1520553909.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:10.359Z,1520553910.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:10.765Z,1520553910.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:11.158Z,1520553911.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:11.562Z,1520553911.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:11.952Z,1520553911.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:12.362Z,1520553912.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:12.764Z,1520553912.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:13.163Z,1520553913.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:13.567Z,1520553913.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:13.971Z,1520553913.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:14.365Z,1520553914.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:14.767Z,1520553914.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:15.179Z,1520553915.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:15.547Z,1520553915.547 [NAL9602](INFO): SBD MO Status=0, MOMSN=4903, MT Status=0, MTMSN=0
2018-03-09T00:05:15.547Z,1520553915.547 [NAL9602](INFO): No messages in MT queue
2018-03-09T00:05:15.588Z,1520553915.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:15.958Z,1520553915.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:16.385Z,1520553916.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:16.745Z,1520553916.745 [NAL9602](INFO): GPS fix at 20180309T000435: (21.316494, -157.875701)
2018-03-09T00:05:16.789Z,1520553916.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:16.814Z,1520553916.814 [Default:CheckIn:Read_GPS] Stopped
2018-03-09T00:05:16.814Z,1520553916.814 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-09T00:05:17.185Z,1520553917.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:17.802Z,1520553917.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:18.115Z,1520553918.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:21.792Z,1520553921.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:21.905Z,1520553921.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:22.269Z,1520553922.269 [DataOverHttps](INFO): Sending 62 bytes from file Logs/20180308T074127/Courier0392.lzma
2018-03-09T00:05:22.303Z,1520553922.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:22.695Z,1520553922.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:23.064Z,1520553923.064 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0392.lzma.bak
2018-03-09T00:05:23.064Z,1520553923.064 [DataOverHttps](INFO): SBD MOMSN=7990311
2018-03-09T00:05:23.106Z,1520553923.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:23.680Z,1520553923.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:23.889Z,1520553923.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:27.262Z,1520553927.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:27.307Z,1520553927.307 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T00:05:27.307Z,1520553927.307 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-09T00:05:27.308Z,1520553927.308 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T00:05:27.320Z,1520553927.320 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T00:05:27.424Z,1520553927.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:27.481Z,1520553927.481 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T00:05:27.481Z,1520553927.481 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-09T00:05:27.770Z,1520553927.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:27.818Z,1520553927.818 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T00:05:27.818Z,1520553927.818 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T00:05:27.818Z,1520553927.818 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T00:05:28.169Z,1520553928.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:28.561Z,1520553928.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:28.965Z,1520553928.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:32.236Z,1520553932.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:32.364Z,1520553932.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:35.761Z,1520553935.761 [DataOverHttps](INFO): Sending 122 bytes from file Logs/20180308T074127/Express0393.lzma
2018-03-09T00:05:35.783Z,1520553935.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:35.919Z,1520553935.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:36.271Z,1520553936.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:36.648Z,1520553936.648 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0393.lzma.bak
2018-03-09T00:05:36.648Z,1520553936.648 [DataOverHttps](INFO): SBD MOMSN=7990314
2018-03-09T00:05:36.685Z,1520553936.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:37.266Z,1520553937.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:37.289Z,1520553937.289 [Default:CheckIn:Read_Iridium] Stopped
2018-03-09T00:05:37.289Z,1520553937.289 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-09T00:05:37.289Z,1520553937.289 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-09T00:05:37.468Z,1520553937.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:37.877Z,1520553937.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:41.150Z,1520553941.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:41.321Z,1520553941.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:41.636Z,1520553941.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:42.033Z,1520553942.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:42.433Z,1520553942.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:42.829Z,1520553942.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:43.235Z,1520553943.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:43.639Z,1520553943.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:44.033Z,1520553944.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:44.432Z,1520553944.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:44.832Z,1520553944.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:45.245Z,1520553945.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:45.635Z,1520553945.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:46.049Z,1520553946.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:46.439Z,1520553946.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:46.835Z,1520553946.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:47.222Z,1520553947.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:47.629Z,1520553947.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:48.026Z,1520553948.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:48.431Z,1520553948.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:48.831Z,1520553948.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:49.233Z,1520553949.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:49.633Z,1520553949.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:50.033Z,1520553950.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:50.429Z,1520553950.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:50.830Z,1520553950.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:51.231Z,1520553951.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:51.634Z,1520553951.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:52.006Z,1520553952.006 [NAL9602](INFO): Powering down
2018-03-09T00:05:52.024Z,1520553952.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:52.436Z,1520553952.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:52.826Z,1520553952.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:53.223Z,1520553953.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:53.635Z,1520553953.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:54.030Z,1520553954.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:54.433Z,1520553954.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:54.833Z,1520553954.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:55.222Z,1520553955.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:55.630Z,1520553955.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:56.030Z,1520553956.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:56.426Z,1520553956.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:56.830Z,1520553956.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:57.231Z,1520553957.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:57.631Z,1520553957.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:58.032Z,1520553958.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:58.429Z,1520553958.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:58.839Z,1520553958.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:59.223Z,1520553959.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:05:59.638Z,1520553959.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:00.025Z,1520553960.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:00.422Z,1520553960.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:00.835Z,1520553960.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:01.231Z,1520553961.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:01.630Z,1520553961.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:02.032Z,1520553962.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:02.434Z,1520553962.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:02.827Z,1520553962.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:03.226Z,1520553963.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:03.634Z,1520553963.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:04.027Z,1520553964.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:04.431Z,1520553964.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:04.834Z,1520553964.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:05.234Z,1520553965.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:05.634Z,1520553965.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:06.034Z,1520553966.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:06.441Z,1520553966.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:06.837Z,1520553966.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:07.226Z,1520553967.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:07.636Z,1520553967.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:08.032Z,1520553968.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:08.433Z,1520553968.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:08.826Z,1520553968.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:09.227Z,1520553969.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:09.630Z,1520553969.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:10.023Z,1520553970.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:10.437Z,1520553970.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:10.831Z,1520553970.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:11.226Z,1520553971.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:11.634Z,1520553971.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:12.033Z,1520553972.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:12.435Z,1520553972.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:12.849Z,1520553972.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:13.222Z,1520553973.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:13.630Z,1520553973.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:14.026Z,1520553974.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:14.426Z,1520553974.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:14.677Z,1520553974.677 [CommandLine](IMPORTANT): got command report mod platform_mass_position
2018-03-09T00:06:14.826Z,1520553974.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:15.636Z,1520553975.636 [Reporter](INFO): platform_mass_position -0.013001 m
2018-03-09T00:06:15.706Z,1520553975.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:16.067Z,1520553976.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:16.491Z,1520553976.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:16.886Z,1520553976.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:17.292Z,1520553977.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:17.704Z,1520553977.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:18.107Z,1520553978.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:18.493Z,1520553978.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:18.889Z,1520553978.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:19.292Z,1520553979.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:19.691Z,1520553979.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:20.077Z,1520553980.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:20.491Z,1520553980.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:20.887Z,1520553980.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:21.291Z,1520553981.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:21.682Z,1520553981.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:22.067Z,1520553982.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:22.504Z,1520553982.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:22.871Z,1520553982.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:23.267Z,1520553983.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:23.680Z,1520553983.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:24.089Z,1520553984.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:24.488Z,1520553984.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:24.908Z,1520553984.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:25.315Z,1520553985.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:25.693Z,1520553985.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:26.101Z,1520553986.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:26.490Z,1520553986.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:26.883Z,1520553986.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:27.283Z,1520553987.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:27.685Z,1520553987.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:28.068Z,1520553988.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:28.478Z,1520553988.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:28.873Z,1520553988.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:29.267Z,1520553989.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:29.706Z,1520553989.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:30.071Z,1520553990.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:30.517Z,1520553990.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:30.887Z,1520553990.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:31.293Z,1520553991.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:31.691Z,1520553991.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:32.115Z,1520553992.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:32.516Z,1520553992.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:32.884Z,1520553992.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:33.297Z,1520553993.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:33.684Z,1520553993.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:34.084Z,1520553994.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:34.477Z,1520553994.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:34.887Z,1520553994.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:35.285Z,1520553995.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:35.683Z,1520553995.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:36.085Z,1520553996.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:36.485Z,1520553996.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:36.909Z,1520553996.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:37.283Z,1520553997.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:37.719Z,1520553997.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:40.937Z,1520554000.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:41.053Z,1520554001.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:41.456Z,1520554001.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:41.851Z,1520554001.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:42.252Z,1520554002.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:42.658Z,1520554002.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:43.049Z,1520554003.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:43.449Z,1520554003.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:43.864Z,1520554003.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:44.260Z,1520554004.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:44.654Z,1520554004.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:45.053Z,1520554005.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:45.451Z,1520554005.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:45.854Z,1520554005.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:46.254Z,1520554006.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:46.654Z,1520554006.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:47.055Z,1520554007.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:47.454Z,1520554007.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:47.850Z,1520554007.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:48.254Z,1520554008.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:48.654Z,1520554008.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:49.051Z,1520554009.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:49.450Z,1520554009.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:49.854Z,1520554009.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:50.250Z,1520554010.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:50.654Z,1520554010.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:51.054Z,1520554011.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:51.454Z,1520554011.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:51.863Z,1520554011.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:52.253Z,1520554012.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:52.642Z,1520554012.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:53.042Z,1520554013.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:53.455Z,1520554013.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:53.859Z,1520554013.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:54.258Z,1520554014.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:54.653Z,1520554014.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:55.043Z,1520554015.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:55.446Z,1520554015.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:55.850Z,1520554015.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:56.249Z,1520554016.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:56.650Z,1520554016.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:57.046Z,1520554017.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:57.453Z,1520554017.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:57.850Z,1520554017.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:58.255Z,1520554018.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:58.654Z,1520554018.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:59.053Z,1520554019.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:59.461Z,1520554019.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:06:59.857Z,1520554019.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:00.257Z,1520554020.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:00.653Z,1520554020.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:01.050Z,1520554021.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:01.454Z,1520554021.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:01.854Z,1520554021.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:02.250Z,1520554022.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:02.654Z,1520554022.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:03.061Z,1520554023.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:03.452Z,1520554023.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:03.852Z,1520554023.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:04.254Z,1520554024.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:04.654Z,1520554024.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:05.063Z,1520554025.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:05.467Z,1520554025.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:05.858Z,1520554025.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:06.257Z,1520554026.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:06.654Z,1520554026.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:07.043Z,1520554027.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:07.459Z,1520554027.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:07.849Z,1520554027.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:08.303Z,1520554028.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:08.666Z,1520554028.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:09.066Z,1520554029.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:09.448Z,1520554029.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:09.848Z,1520554029.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:10.248Z,1520554030.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:10.652Z,1520554030.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:11.076Z,1520554031.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:11.451Z,1520554031.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:11.854Z,1520554031.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:12.254Z,1520554032.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:12.653Z,1520554032.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:13.055Z,1520554033.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:13.454Z,1520554033.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:13.853Z,1520554033.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:14.255Z,1520554034.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:14.652Z,1520554034.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:15.059Z,1520554035.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:15.455Z,1520554035.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:15.861Z,1520554035.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:16.266Z,1520554036.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:16.646Z,1520554036.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:17.044Z,1520554037.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:17.454Z,1520554037.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:17.846Z,1520554037.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:18.250Z,1520554038.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:18.658Z,1520554038.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:19.055Z,1520554039.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:19.449Z,1520554039.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:19.859Z,1520554039.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:20.252Z,1520554040.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:20.661Z,1520554040.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:21.057Z,1520554041.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:21.454Z,1520554041.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:21.859Z,1520554041.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:22.248Z,1520554042.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:22.654Z,1520554042.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:23.051Z,1520554043.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:23.475Z,1520554043.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:23.854Z,1520554043.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:24.250Z,1520554044.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:24.664Z,1520554044.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:25.042Z,1520554045.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:25.455Z,1520554045.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:25.853Z,1520554045.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:26.242Z,1520554046.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:26.643Z,1520554046.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:27.066Z,1520554047.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:27.442Z,1520554047.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:27.858Z,1520554047.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:28.246Z,1520554048.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:28.642Z,1520554048.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:29.043Z,1520554049.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:29.462Z,1520554049.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:29.846Z,1520554049.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:30.258Z,1520554050.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:30.646Z,1520554050.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:31.042Z,1520554051.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:31.447Z,1520554051.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:31.846Z,1520554051.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:32.246Z,1520554052.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:32.642Z,1520554052.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:33.046Z,1520554053.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:33.450Z,1520554053.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:33.851Z,1520554053.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:34.258Z,1520554054.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:34.653Z,1520554054.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:35.051Z,1520554055.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:35.452Z,1520554055.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:35.850Z,1520554055.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:36.255Z,1520554056.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:36.653Z,1520554056.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:37.053Z,1520554057.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:37.452Z,1520554057.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:37.852Z,1520554057.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:41.129Z,1520554061.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:41.249Z,1520554061.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:41.648Z,1520554061.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:42.021Z,1520554062.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:42.453Z,1520554062.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:42.816Z,1520554062.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:43.216Z,1520554063.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:43.616Z,1520554063.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:44.034Z,1520554064.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:44.410Z,1520554064.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:44.836Z,1520554064.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:44.857Z,1520554064.857 [CommandLine](IMPORTANT): got command maintain sensor Depth_Keller.depth 3.000000 meter
2018-03-09T00:07:44.859Z,1520554064.859 [ComponentRegistry](DEBUG): SyncComponent "Maintain_Depth_Keller.depth" handled in the control thread.
2018-03-09T00:07:44.919Z,1520554064.919 [controlThread](DEBUG): Component order: CycleStarter,Aanderaa_O2,ESPComponent,PAR_Licor,DataOverHttps,Depth_Keller,DropWeight,NAL9602,Onboard,DAT,PNI_TCM,BPC1,PAR_Licor,Depth_Keller,Maintain_Depth_Keller.depth,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2018-03-09T00:07:45.217Z,1520554065.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:45.314Z,1520554065.314 [Radio_Surface](INFO): Powering down
2018-03-09T00:07:45.625Z,1520554065.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:46.019Z,1520554066.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:46.423Z,1520554066.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:46.822Z,1520554066.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:47.325Z,1520554067.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:47.494Z,1520554067.494 [Reporter](INFO): platform_mass_position -0.013150 m
2018-03-09T00:07:47.732Z,1520554067.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:47.842Z,1520554067.842 [Reporter](INFO): platform_mass_position -0.013423 m
2018-03-09T00:07:48.134Z,1520554068.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:48.254Z,1520554068.254 [Reporter](INFO): platform_mass_position -0.013746 m
2018-03-09T00:07:48.524Z,1520554068.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:48.626Z,1520554068.626 [Reporter](INFO): platform_mass_position -0.014038 m
2018-03-09T00:07:48.934Z,1520554068.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:49.038Z,1520554069.038 [Reporter](INFO): platform_mass_position -0.014360 m
2018-03-09T00:07:49.334Z,1520554069.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:49.446Z,1520554069.446 [Reporter](INFO): platform_mass_position -0.014680 m
2018-03-09T00:07:49.734Z,1520554069.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:49.851Z,1520554069.851 [Reporter](INFO): platform_mass_position -0.014996 m
2018-03-09T00:07:50.125Z,1520554070.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:50.234Z,1520554070.234 [Reporter](INFO): platform_mass_position -0.015297 m
2018-03-09T00:07:50.522Z,1520554070.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:50.646Z,1520554070.646 [Reporter](INFO): platform_mass_position -0.015617 m
2018-03-09T00:07:50.916Z,1520554070.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:51.082Z,1520554071.082 [Reporter](INFO): platform_mass_position -0.015962 m
2018-03-09T00:07:51.323Z,1520554071.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:51.478Z,1520554071.478 [Reporter](INFO): platform_mass_position -0.016272 m
2018-03-09T00:07:51.730Z,1520554071.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:51.973Z,1520554071.973 [Reporter](INFO): platform_mass_position -0.016659 m
2018-03-09T00:07:52.124Z,1520554072.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:52.242Z,1520554072.242 [Reporter](INFO): platform_mass_position -0.016872 m
2018-03-09T00:07:52.533Z,1520554072.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:52.666Z,1520554072.666 [Reporter](INFO): platform_mass_position -0.017204 m
2018-03-09T00:07:52.927Z,1520554072.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:53.038Z,1520554073.038 [Reporter](INFO): platform_mass_position -0.017495 m
2018-03-09T00:07:53.331Z,1520554073.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:53.474Z,1520554073.474 [Reporter](INFO): platform_mass_position -0.017838 m
2018-03-09T00:07:53.738Z,1520554073.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:53.842Z,1520554073.842 [Reporter](INFO): platform_mass_position -0.018126 m
2018-03-09T00:07:54.135Z,1520554074.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:54.242Z,1520554074.242 [Reporter](INFO): platform_mass_position -0.018438 m
2018-03-09T00:07:54.530Z,1520554074.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:54.638Z,1520554074.638 [Reporter](INFO): platform_mass_position -0.018749 m
2018-03-09T00:07:54.937Z,1520554074.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:55.038Z,1520554075.038 [Reporter](INFO): platform_mass_position -0.019000 m
2018-03-09T00:07:55.322Z,1520554075.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:55.726Z,1520554075.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:56.122Z,1520554076.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:56.522Z,1520554076.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:56.920Z,1520554076.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:57.322Z,1520554077.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:57.722Z,1520554077.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:58.119Z,1520554078.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:58.522Z,1520554078.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:58.922Z,1520554078.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:59.329Z,1520554079.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:07:59.724Z,1520554079.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:00.170Z,1520554080.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:00.516Z,1520554080.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:00.927Z,1520554080.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:01.331Z,1520554081.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:01.735Z,1520554081.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:02.136Z,1520554082.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:02.530Z,1520554082.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:02.922Z,1520554082.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:03.322Z,1520554083.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:03.722Z,1520554083.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:04.118Z,1520554084.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:04.522Z,1520554084.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:04.918Z,1520554084.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:05.322Z,1520554085.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:05.722Z,1520554085.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:06.123Z,1520554086.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:06.527Z,1520554086.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:06.927Z,1520554086.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:07.347Z,1520554087.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:07.726Z,1520554087.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:08.126Z,1520554088.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:08.534Z,1520554088.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:08.929Z,1520554088.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:09.328Z,1520554089.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:09.730Z,1520554089.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:10.118Z,1520554090.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:10.522Z,1520554090.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:10.922Z,1520554090.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:11.320Z,1520554091.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:11.722Z,1520554091.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:12.122Z,1520554092.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:12.519Z,1520554092.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:12.922Z,1520554092.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:13.352Z,1520554093.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:13.730Z,1520554093.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:14.135Z,1520554094.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:14.533Z,1520554094.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:14.923Z,1520554094.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:14.945Z,1520554094.945 [Default:B.GoToSurface](ERROR): Pitch down timeout. Pitch: -1.67
2018-03-09T00:08:15.213Z,1520554095.213 [Radio_Surface](INFO): Powering up
2018-03-09T00:08:15.328Z,1520554095.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:15.728Z,1520554095.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:16.131Z,1520554096.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:16.534Z,1520554096.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:16.930Z,1520554096.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:17.316Z,1520554097.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:17.723Z,1520554097.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:18.119Z,1520554098.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:18.518Z,1520554098.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:18.922Z,1520554098.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:19.318Z,1520554099.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:19.722Z,1520554099.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:20.128Z,1520554100.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:20.531Z,1520554100.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:20.946Z,1520554100.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:21.333Z,1520554101.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:21.722Z,1520554101.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:22.126Z,1520554102.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:22.535Z,1520554102.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:22.937Z,1520554102.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:23.330Z,1520554103.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:23.736Z,1520554103.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:24.130Z,1520554104.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:24.520Z,1520554104.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:24.935Z,1520554104.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:25.318Z,1520554105.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:25.719Z,1520554105.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:26.131Z,1520554106.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:26.529Z,1520554106.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:26.918Z,1520554106.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:27.329Z,1520554107.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:27.718Z,1520554107.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:28.142Z,1520554108.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:28.170Z,1520554108.170 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T00:08:28.170Z,1520554108.170 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-09T00:08:28.170Z,1520554108.170 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T00:08:28.204Z,1520554108.204 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T00:08:28.539Z,1520554108.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:28.570Z,1520554108.570 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T00:08:28.570Z,1520554108.570 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-09T00:08:28.922Z,1520554108.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:28.958Z,1520554108.958 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T00:08:28.959Z,1520554108.959 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T00:08:28.959Z,1520554108.959 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T00:08:29.322Z,1520554109.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:29.725Z,1520554109.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:30.130Z,1520554110.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:30.520Z,1520554110.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:30.922Z,1520554110.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:31.330Z,1520554111.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:31.726Z,1520554111.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:32.127Z,1520554112.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:32.532Z,1520554112.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:32.928Z,1520554112.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:33.327Z,1520554113.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:33.729Z,1520554113.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:34.130Z,1520554114.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:34.530Z,1520554114.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:34.918Z,1520554114.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:35.341Z,1520554115.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:35.721Z,1520554115.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:36.134Z,1520554116.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:36.519Z,1520554116.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:36.922Z,1520554116.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:37.327Z,1520554117.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:37.727Z,1520554117.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:38.122Z,1520554118.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:38.522Z,1520554118.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:38.919Z,1520554118.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:39.322Z,1520554119.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:39.722Z,1520554119.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:40.118Z,1520554120.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:40.526Z,1520554120.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:40.926Z,1520554120.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:41.319Z,1520554121.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:41.722Z,1520554121.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:42.137Z,1520554122.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:42.519Z,1520554122.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:42.923Z,1520554122.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:43.328Z,1520554123.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:43.731Z,1520554123.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:44.131Z,1520554124.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:44.531Z,1520554124.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:44.934Z,1520554124.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:45.328Z,1520554125.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:45.731Z,1520554125.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:46.127Z,1520554126.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:46.530Z,1520554126.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:46.926Z,1520554126.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:47.319Z,1520554127.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:47.734Z,1520554127.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:48.133Z,1520554128.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:48.517Z,1520554128.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:48.922Z,1520554128.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:49.322Z,1520554129.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:49.719Z,1520554129.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:50.118Z,1520554130.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:50.522Z,1520554130.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:50.923Z,1520554130.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:51.334Z,1520554131.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:51.734Z,1520554131.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:52.135Z,1520554132.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:52.531Z,1520554132.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:52.930Z,1520554132.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:53.330Z,1520554133.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:53.730Z,1520554133.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:54.133Z,1520554134.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:54.549Z,1520554134.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:54.934Z,1520554134.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:55.329Z,1520554135.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:55.734Z,1520554135.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:56.131Z,1520554136.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:56.540Z,1520554136.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:56.921Z,1520554136.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:57.344Z,1520554137.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:57.739Z,1520554137.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:58.138Z,1520554138.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:58.523Z,1520554138.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:58.920Z,1520554138.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:59.330Z,1520554139.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:08:59.723Z,1520554139.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:00.119Z,1520554140.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:00.528Z,1520554140.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:00.922Z,1520554140.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:01.327Z,1520554141.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:01.727Z,1520554141.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:02.130Z,1520554142.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:02.526Z,1520554142.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:02.936Z,1520554142.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:03.331Z,1520554143.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:03.750Z,1520554143.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:04.136Z,1520554144.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:04.523Z,1520554144.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:04.918Z,1520554144.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:05.322Z,1520554145.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:05.722Z,1520554145.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:06.118Z,1520554146.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:06.522Z,1520554146.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:06.922Z,1520554146.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:07.317Z,1520554147.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:07.722Z,1520554147.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:08.105Z,1520554148.105 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-03-09T00:09:08.123Z,1520554148.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:08.523Z,1520554148.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:08.928Z,1520554148.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:09.330Z,1520554149.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:09.727Z,1520554149.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:10.129Z,1520554150.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:10.530Z,1520554150.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:10.931Z,1520554150.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:11.343Z,1520554151.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:11.734Z,1520554151.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:12.121Z,1520554152.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:12.526Z,1520554152.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:12.930Z,1520554152.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:13.327Z,1520554153.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:13.734Z,1520554153.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:14.133Z,1520554154.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:14.526Z,1520554154.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:14.930Z,1520554154.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:15.330Z,1520554155.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:15.729Z,1520554155.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:16.130Z,1520554156.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:16.530Z,1520554156.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:16.934Z,1520554156.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:17.322Z,1520554157.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:17.727Z,1520554157.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:18.129Z,1520554158.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:18.530Z,1520554158.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:18.939Z,1520554158.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:19.321Z,1520554159.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:19.727Z,1520554159.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:20.130Z,1520554160.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:20.526Z,1520554160.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:20.937Z,1520554160.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:21.340Z,1520554161.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:21.733Z,1520554161.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:22.129Z,1520554162.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:22.532Z,1520554162.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:22.935Z,1520554162.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:23.335Z,1520554163.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:23.725Z,1520554163.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:24.119Z,1520554164.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:24.525Z,1520554164.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:24.933Z,1520554164.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:25.326Z,1520554165.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:25.739Z,1520554165.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:26.129Z,1520554166.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:26.526Z,1520554166.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:26.934Z,1520554166.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:27.331Z,1520554167.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:27.732Z,1520554167.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:28.131Z,1520554168.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:28.529Z,1520554168.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:28.930Z,1520554168.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:29.329Z,1520554169.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:29.732Z,1520554169.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:30.126Z,1520554170.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:30.541Z,1520554170.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:30.922Z,1520554170.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:31.326Z,1520554171.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:31.726Z,1520554171.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:32.123Z,1520554172.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:32.518Z,1520554172.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:32.937Z,1520554172.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:33.322Z,1520554173.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:33.756Z,1520554173.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:34.120Z,1520554174.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:34.533Z,1520554174.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:34.932Z,1520554174.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:35.329Z,1520554175.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:35.731Z,1520554175.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:36.126Z,1520554176.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:36.526Z,1520554176.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:36.934Z,1520554176.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:37.334Z,1520554177.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:37.726Z,1520554177.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:38.125Z,1520554178.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:38.534Z,1520554178.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:38.915Z,1520554178.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:39.337Z,1520554179.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:39.718Z,1520554179.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:40.118Z,1520554180.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:40.536Z,1520554180.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:40.918Z,1520554180.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:41.342Z,1520554181.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:41.725Z,1520554181.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:42.126Z,1520554182.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:42.519Z,1520554182.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:42.923Z,1520554182.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:43.326Z,1520554183.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:43.731Z,1520554183.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:44.128Z,1520554184.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:44.527Z,1520554184.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:44.928Z,1520554184.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:45.329Z,1520554185.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:45.731Z,1520554185.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:46.126Z,1520554186.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:46.528Z,1520554186.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:46.926Z,1520554186.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:47.331Z,1520554187.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:47.725Z,1520554187.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:48.146Z,1520554188.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:48.515Z,1520554188.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:48.931Z,1520554188.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:49.327Z,1520554189.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:49.726Z,1520554189.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:50.122Z,1520554190.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:50.518Z,1520554190.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:50.920Z,1520554190.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:51.327Z,1520554191.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:51.718Z,1520554191.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:52.122Z,1520554192.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:52.522Z,1520554192.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:52.926Z,1520554192.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:53.319Z,1520554193.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:53.722Z,1520554193.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:54.122Z,1520554194.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:54.522Z,1520554194.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:54.922Z,1520554194.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:55.318Z,1520554195.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:55.734Z,1520554195.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:56.129Z,1520554196.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:56.553Z,1520554196.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:56.929Z,1520554196.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:57.326Z,1520554197.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:57.724Z,1520554197.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:58.129Z,1520554198.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:58.528Z,1520554198.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:58.931Z,1520554198.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:59.326Z,1520554199.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:09:59.728Z,1520554199.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:00.134Z,1520554200.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:00.526Z,1520554200.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:00.937Z,1520554200.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:01.327Z,1520554201.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:01.726Z,1520554201.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:02.124Z,1520554202.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:02.551Z,1520554202.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:02.916Z,1520554202.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:03.323Z,1520554203.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:03.729Z,1520554203.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:04.115Z,1520554204.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:04.525Z,1520554204.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:04.930Z,1520554204.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:05.319Z,1520554205.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:05.726Z,1520554205.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:06.130Z,1520554206.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:06.528Z,1520554206.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:06.927Z,1520554206.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:07.330Z,1520554207.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:07.728Z,1520554207.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:08.101Z,1520554208.101 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-03-09T00:10:08.127Z,1520554208.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:08.531Z,1520554208.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:08.928Z,1520554208.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:09.340Z,1520554209.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:09.734Z,1520554209.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:10.144Z,1520554210.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:10.534Z,1520554210.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:10.922Z,1520554210.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:11.320Z,1520554211.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:11.721Z,1520554211.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:12.122Z,1520554212.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:12.521Z,1520554212.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:12.923Z,1520554212.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:13.322Z,1520554213.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:13.722Z,1520554213.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:14.122Z,1520554214.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:14.522Z,1520554214.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:14.922Z,1520554214.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:15.338Z,1520554215.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:15.718Z,1520554215.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:16.118Z,1520554216.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:16.522Z,1520554216.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:16.931Z,1520554216.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:17.316Z,1520554217.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:17.722Z,1520554217.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:18.131Z,1520554218.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:18.519Z,1520554218.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:18.925Z,1520554218.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:19.330Z,1520554219.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:19.726Z,1520554219.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:20.124Z,1520554220.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:20.526Z,1520554220.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:20.926Z,1520554220.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:21.330Z,1520554221.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:21.731Z,1520554221.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:22.129Z,1520554222.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:22.530Z,1520554222.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:22.930Z,1520554222.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:23.326Z,1520554223.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:23.730Z,1520554223.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:24.131Z,1520554224.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:24.537Z,1520554224.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:24.943Z,1520554224.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:25.330Z,1520554225.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:25.729Z,1520554225.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:26.137Z,1520554226.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:26.530Z,1520554226.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:26.920Z,1520554226.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:27.330Z,1520554227.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:27.730Z,1520554227.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:28.118Z,1520554228.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:28.534Z,1520554228.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:28.922Z,1520554228.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:29.318Z,1520554229.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:29.726Z,1520554229.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:30.122Z,1520554230.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:30.527Z,1520554230.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:30.926Z,1520554230.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:31.327Z,1520554231.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:31.739Z,1520554231.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:32.122Z,1520554232.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:32.526Z,1520554232.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:32.919Z,1520554232.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:33.322Z,1520554233.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:33.722Z,1520554233.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:34.119Z,1520554234.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:34.526Z,1520554234.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:34.926Z,1520554234.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:35.319Z,1520554235.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:35.722Z,1520554235.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:36.126Z,1520554236.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:36.520Z,1520554236.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:36.922Z,1520554236.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:37.328Z,1520554237.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:37.750Z,1520554237.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:37.784Z,1520554237.784 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-09T00:10:37.786Z,1520554237.786 [Default:CheckIn:C.Wait] Stopped
2018-03-09T00:10:37.786Z,1520554237.786 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-09T00:10:37.786Z,1520554237.786 [Default:CheckIn:D] Running Loop=1
2018-03-09T00:10:38.133Z,1520554238.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:38.153Z,1520554238.153 [Default:CheckIn:D] Stopped
2018-03-09T00:10:38.153Z,1520554238.153 [Default:CheckIn:E] Running Loop=1
2018-03-09T00:10:38.537Z,1520554238.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:38.594Z,1520554238.594 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 984.889128 min 
2018-03-09T00:10:38.594Z,1520554238.594 [Default:CheckIn:E] Stopped
2018-03-09T00:10:38.594Z,1520554238.594 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-09T00:10:38.594Z,1520554238.594 [Default:CheckIn] Stopped
2018-03-09T00:10:38.594Z,1520554238.594 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-09T00:10:38.595Z,1520554238.595 [Default:CheckIn](INFO): Running loop #99
2018-03-09T00:10:38.595Z,1520554238.595 [Default:CheckIn] Running Loop=99
2018-03-09T00:10:38.595Z,1520554238.595 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-09T00:10:38.595Z,1520554238.595 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-09T00:10:38.922Z,1520554238.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:39.306Z,1520554239.306 [NAL9602](INFO): Powering up
2018-03-09T00:10:39.322Z,1520554239.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:39.722Z,1520554239.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:40.121Z,1520554240.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:40.532Z,1520554240.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:40.926Z,1520554240.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:41.328Z,1520554241.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:41.734Z,1520554241.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:42.130Z,1520554242.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:42.502Z,1520554242.502 [DataOverHttps](INFO): setting unavailable, lastComms_.elapsed()=180.076477
2018-03-09T00:10:42.538Z,1520554242.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:42.930Z,1520554242.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:43.329Z,1520554243.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:43.734Z,1520554243.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:44.131Z,1520554244.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:44.534Z,1520554244.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:44.939Z,1520554244.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:45.329Z,1520554245.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:45.731Z,1520554245.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:46.122Z,1520554246.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:46.542Z,1520554246.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:46.926Z,1520554246.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:47.326Z,1520554247.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:47.723Z,1520554247.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:48.128Z,1520554248.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:48.526Z,1520554248.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:48.927Z,1520554248.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:49.323Z,1520554249.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:49.727Z,1520554249.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:50.144Z,1520554250.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:50.510Z,1520554250.510 [NAL9602](INFO): NAL9602 initialized
2018-03-09T00:10:50.526Z,1520554250.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:50.926Z,1520554250.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:51.355Z,1520554251.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:51.749Z,1520554251.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:52.133Z,1520554252.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:52.523Z,1520554252.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:52.919Z,1520554252.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:53.327Z,1520554253.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:53.381Z,1520554253.381 [Radio_Surface](INFO): Powering down
2018-03-09T00:10:53.733Z,1520554253.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:54.136Z,1520554254.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:54.530Z,1520554254.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:54.937Z,1520554254.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:55.335Z,1520554255.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:55.731Z,1520554255.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:56.139Z,1520554256.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:56.531Z,1520554256.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:56.935Z,1520554256.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:57.323Z,1520554257.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:57.735Z,1520554257.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:58.123Z,1520554258.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:58.522Z,1520554258.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:58.918Z,1520554258.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:59.318Z,1520554259.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:10:59.441Z,1520554259.441 [Radio_Surface](INFO): Powering up
2018-03-09T00:10:59.724Z,1520554259.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:00.139Z,1520554260.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:00.550Z,1520554260.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:00.931Z,1520554260.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:01.320Z,1520554261.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:01.730Z,1520554261.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:02.132Z,1520554262.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:02.527Z,1520554262.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:02.930Z,1520554262.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:03.331Z,1520554263.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:03.731Z,1520554263.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:04.128Z,1520554264.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:04.541Z,1520554264.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:04.916Z,1520554264.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:05.334Z,1520554265.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:05.729Z,1520554265.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:06.134Z,1520554266.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:06.540Z,1520554266.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:06.922Z,1520554266.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:07.334Z,1520554267.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:07.733Z,1520554267.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:08.122Z,1520554268.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:08.527Z,1520554268.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:08.930Z,1520554268.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:09.329Z,1520554269.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:09.727Z,1520554269.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:10.126Z,1520554270.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:10.532Z,1520554270.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:10.930Z,1520554270.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:11.331Z,1520554271.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:11.732Z,1520554271.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:12.121Z,1520554272.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:12.535Z,1520554272.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:12.929Z,1520554272.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:13.343Z,1520554273.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:13.718Z,1520554273.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:14.127Z,1520554274.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:14.530Z,1520554274.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:14.922Z,1520554274.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:15.324Z,1520554275.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:15.731Z,1520554275.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:16.123Z,1520554276.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:16.526Z,1520554276.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:16.928Z,1520554276.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:17.329Z,1520554277.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:17.730Z,1520554277.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:18.121Z,1520554278.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:18.531Z,1520554278.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:18.936Z,1520554278.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:19.334Z,1520554279.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:19.730Z,1520554279.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:20.131Z,1520554280.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:20.518Z,1520554280.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:20.923Z,1520554280.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:21.323Z,1520554281.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:21.722Z,1520554281.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:22.130Z,1520554282.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:22.526Z,1520554282.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:22.931Z,1520554282.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:23.331Z,1520554283.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:23.732Z,1520554283.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:24.122Z,1520554284.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:24.526Z,1520554284.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:24.907Z,1520554284.907 [NAL9602](INFO): SBD MO Status=2, MOMSN=4904, MT Status=2, MTMSN=0
2018-03-09T00:11:24.908Z,1520554284.908 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-09T00:11:24.940Z,1520554284.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:25.337Z,1520554285.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:25.731Z,1520554285.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:26.131Z,1520554286.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:26.518Z,1520554286.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:26.930Z,1520554286.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:27.333Z,1520554287.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:27.722Z,1520554287.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:28.146Z,1520554288.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:28.527Z,1520554288.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:28.922Z,1520554288.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:28.963Z,1520554288.963 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T00:11:28.963Z,1520554288.963 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-03-09T00:11:28.963Z,1520554288.963 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T00:11:28.994Z,1520554288.994 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T00:11:29.329Z,1520554289.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:29.385Z,1520554289.385 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T00:11:29.385Z,1520554289.385 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-03-09T00:11:29.747Z,1520554289.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:29.765Z,1520554289.765 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T00:11:29.766Z,1520554289.766 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T00:11:29.766Z,1520554289.766 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T00:11:30.132Z,1520554290.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:30.531Z,1520554290.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:30.926Z,1520554290.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:31.345Z,1520554291.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:31.730Z,1520554291.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:32.131Z,1520554292.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:32.521Z,1520554292.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:32.926Z,1520554292.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:33.332Z,1520554293.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:33.735Z,1520554293.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:34.131Z,1520554294.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:34.538Z,1520554294.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:34.923Z,1520554294.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:35.341Z,1520554295.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:35.724Z,1520554295.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:36.122Z,1520554296.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:36.522Z,1520554296.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:36.926Z,1520554296.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:37.330Z,1520554297.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:37.722Z,1520554297.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:38.122Z,1520554298.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:38.528Z,1520554298.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:38.928Z,1520554298.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:39.330Z,1520554299.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:39.723Z,1520554299.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:40.133Z,1520554300.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:40.532Z,1520554300.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:40.931Z,1520554300.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:41.326Z,1520554301.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:41.739Z,1520554301.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:42.135Z,1520554302.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:42.539Z,1520554302.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:42.931Z,1520554302.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:43.334Z,1520554303.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:43.722Z,1520554303.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:44.123Z,1520554304.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:44.522Z,1520554304.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:44.938Z,1520554304.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:45.343Z,1520554305.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:45.722Z,1520554305.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:46.122Z,1520554306.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:46.522Z,1520554306.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:46.936Z,1520554306.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:47.318Z,1520554307.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:47.722Z,1520554307.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:48.133Z,1520554308.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:48.507Z,1520554308.507 [NAL9602](INFO): SBD MO Status=2, MOMSN=4904, MT Status=2, MTMSN=0
2018-03-09T00:11:48.507Z,1520554308.507 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-09T00:11:48.524Z,1520554308.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:48.944Z,1520554308.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:49.323Z,1520554309.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:49.723Z,1520554309.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:50.134Z,1520554310.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:50.523Z,1520554310.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:50.927Z,1520554310.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:51.330Z,1520554311.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:51.727Z,1520554311.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:52.132Z,1520554312.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:52.530Z,1520554312.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:52.940Z,1520554312.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:53.345Z,1520554313.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:53.734Z,1520554313.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:54.130Z,1520554314.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:54.531Z,1520554314.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:54.929Z,1520554314.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:55.331Z,1520554315.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:55.730Z,1520554315.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:56.137Z,1520554316.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:56.540Z,1520554316.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:56.934Z,1520554316.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:57.331Z,1520554317.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:57.731Z,1520554317.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:58.139Z,1520554318.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:58.544Z,1520554318.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:58.926Z,1520554318.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:59.339Z,1520554319.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:11:59.723Z,1520554319.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:00.123Z,1520554320.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:00.522Z,1520554320.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:00.922Z,1520554320.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:01.320Z,1520554321.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:01.726Z,1520554321.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:02.122Z,1520554322.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:02.520Z,1520554322.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:02.926Z,1520554322.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:03.322Z,1520554323.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:03.743Z,1520554323.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:04.126Z,1520554324.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:04.523Z,1520554324.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:04.928Z,1520554324.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:05.334Z,1520554325.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:05.730Z,1520554325.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:05.774Z,1520554325.774 [Radio_Surface](INFO): Powering down
2018-03-09T00:12:05.785Z,1520554325.785 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-09T00:12:06.126Z,1520554326.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:06.527Z,1520554326.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:06.911Z,1520554326.911 [NAL9602](INFO): SBD MO Status=0, MOMSN=4904, MT Status=0, MTMSN=0
2018-03-09T00:12:06.911Z,1520554326.911 [NAL9602](INFO): No messages in MT queue
2018-03-09T00:12:06.928Z,1520554326.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:07.325Z,1520554327.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:07.736Z,1520554327.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:08.110Z,1520554328.110 [NAL9602](INFO): GPS fix at 20180309T001127: (21.316482, -157.875687)
2018-03-09T00:12:08.146Z,1520554328.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:08.178Z,1520554328.178 [Default:CheckIn:Read_GPS] Stopped
2018-03-09T00:12:08.178Z,1520554328.178 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-09T00:12:08.541Z,1520554328.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:08.913Z,1520554328.913 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-03-09T00:12:08.961Z,1520554328.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:09.322Z,1520554329.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:09.746Z,1520554329.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:10.152Z,1520554330.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:10.530Z,1520554330.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:10.925Z,1520554330.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:11.351Z,1520554331.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:11.833Z,1520554331.833 [Radio_Surface](INFO): Powering up
2018-03-09T00:12:12.094Z,1520554332.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:12.215Z,1520554332.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:14.585Z,1520554334.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:14.717Z,1520554334.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:15.075Z,1520554335.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:15.467Z,1520554335.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:15.871Z,1520554335.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:16.257Z,1520554336.257 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-03-09T00:12:16.257Z,1520554336.257 [DropWeight] Hardware Fault, FailCount= 1
2018-03-09T00:12:16.257Z,1520554336.257 [DropWeight](ERROR): Hardware Fault
2018-03-09T00:12:16.287Z,1520554336.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:16.372Z,1520554336.372 [CBIT](INFO): Critical error at 20180309T001216
2018-03-09T00:12:16.378Z,1520554336.378 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-03-09T00:12:16.378Z,1520554336.378 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-03-09T00:12:16.668Z,1520554336.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:16.712Z,1520554336.712 [CBIT](INFO): Critical error at 20180309T001216
2018-03-09T00:12:17.059Z,1520554337.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:17.472Z,1520554337.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:17.869Z,1520554337.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:18.269Z,1520554338.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:18.670Z,1520554338.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:19.079Z,1520554339.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:19.455Z,1520554339.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:19.858Z,1520554339.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:20.270Z,1520554340.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:20.658Z,1520554340.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:21.081Z,1520554341.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:21.462Z,1520554341.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:21.858Z,1520554341.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:22.263Z,1520554342.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:22.662Z,1520554342.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:23.059Z,1520554343.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:23.447Z,1520554343.447 [NAL9602](INFO): SBD MO Status=1, MOMSN=4905, MT Status=0, MTMSN=0
2018-03-09T00:12:23.497Z,1520554343.497 [NAL9602](INFO): Sent 63 bytes from file Logs/20180308T074127/Courier0396.lzma
2018-03-09T00:12:23.497Z,1520554343.497 [NAL9602](INFO): Packets left to send: 0
2018-03-09T00:12:23.502Z,1520554343.502 [NAL9602](DEBUG): Stored copy of sent data in Logs/20180308T074127/Courier0396.lzma.parts/0000.sbd
2018-03-09T00:12:23.502Z,1520554343.502 [NAL9602](DEBUG): Completed sending Logs/20180308T074127/Courier0396.lzma
2018-03-09T00:12:23.545Z,1520554343.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:24.139Z,1520554344.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:24.262Z,1520554344.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:26.687Z,1520554346.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:26.809Z,1520554346.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:27.195Z,1520554347.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:27.594Z,1520554347.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:27.983Z,1520554347.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:28.401Z,1520554348.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:28.787Z,1520554348.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:29.186Z,1520554349.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:29.592Z,1520554349.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:29.990Z,1520554349.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:30.387Z,1520554350.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:30.791Z,1520554350.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:31.194Z,1520554351.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:31.591Z,1520554351.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:32.002Z,1520554352.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:32.395Z,1520554352.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:32.793Z,1520554352.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:33.189Z,1520554353.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:33.587Z,1520554353.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:33.972Z,1520554353.972 [NAL9602](INFO): SBD MO Status=1, MOMSN=4906, MT Status=0, MTMSN=0
2018-03-09T00:12:34.019Z,1520554354.019 [NAL9602](INFO): Sent 238 bytes from file Logs/20180308T074127/Express0397.lzma
2018-03-09T00:12:34.019Z,1520554354.019 [NAL9602](INFO): Packets left to send: 0
2018-03-09T00:12:34.027Z,1520554354.027 [NAL9602](DEBUG): Stored copy of sent data in Logs/20180308T074127/Express0397.lzma.parts/0000.sbd
2018-03-09T00:12:34.027Z,1520554354.027 [NAL9602](DEBUG): Completed sending Logs/20180308T074127/Express0397.lzma
2018-03-09T00:12:34.120Z,1520554354.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:34.626Z,1520554354.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:34.793Z,1520554354.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:35.193Z,1520554355.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:35.591Z,1520554355.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:35.997Z,1520554355.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:36.406Z,1520554356.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:36.794Z,1520554356.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:37.186Z,1520554357.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:37.611Z,1520554357.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:37.987Z,1520554357.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:38.388Z,1520554358.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:38.786Z,1520554358.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:39.193Z,1520554359.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:39.596Z,1520554359.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:39.993Z,1520554359.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:40.394Z,1520554360.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:40.795Z,1520554360.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:41.197Z,1520554361.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:41.591Z,1520554361.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:41.998Z,1520554361.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:42.398Z,1520554362.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:42.796Z,1520554362.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:43.187Z,1520554363.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:43.602Z,1520554363.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:43.994Z,1520554363.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:44.383Z,1520554364.383 [NAL9602](INFO): SBD MO Status=0, MOMSN=4907, MT Status=0, MTMSN=0
2018-03-09T00:12:44.486Z,1520554364.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:44.514Z,1520554364.514 [Default:CheckIn:Read_Iridium] Stopped
2018-03-09T00:12:44.514Z,1520554364.514 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-09T00:12:44.514Z,1520554364.514 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-09T00:12:44.788Z,1520554364.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:45.185Z,1520554365.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:45.588Z,1520554365.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:45.996Z,1520554365.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:46.393Z,1520554366.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:46.794Z,1520554366.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:47.196Z,1520554367.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:47.585Z,1520554367.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:47.995Z,1520554367.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:48.398Z,1520554368.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:48.795Z,1520554368.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:49.191Z,1520554369.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:49.597Z,1520554369.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:49.991Z,1520554369.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:50.397Z,1520554370.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:50.806Z,1520554370.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:51.184Z,1520554371.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:51.598Z,1520554371.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:51.986Z,1520554371.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:52.389Z,1520554372.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:52.787Z,1520554372.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:53.194Z,1520554373.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:53.589Z,1520554373.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:53.995Z,1520554373.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:54.393Z,1520554374.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:54.790Z,1520554374.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:55.195Z,1520554375.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:55.597Z,1520554375.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:56.001Z,1520554376.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:56.395Z,1520554376.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:56.787Z,1520554376.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:57.195Z,1520554377.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:57.588Z,1520554377.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:57.991Z,1520554377.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:58.388Z,1520554378.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:58.855Z,1520554378.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:59.190Z,1520554379.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:59.589Z,1520554379.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:12:59.988Z,1520554379.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:00.395Z,1520554380.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:00.787Z,1520554380.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:01.184Z,1520554381.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:01.597Z,1520554381.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:01.998Z,1520554381.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:02.397Z,1520554382.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:02.798Z,1520554382.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:03.199Z,1520554383.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:03.593Z,1520554383.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:04.006Z,1520554384.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:04.397Z,1520554384.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:04.794Z,1520554384.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:05.195Z,1520554385.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:05.592Z,1520554385.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:05.614Z,1520554385.614 [Radio_Surface](INFO): Powering down
2018-03-09T00:13:05.986Z,1520554385.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:06.388Z,1520554386.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:06.795Z,1520554386.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:07.190Z,1520554387.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:07.593Z,1520554387.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:07.989Z,1520554387.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:08.395Z,1520554388.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:08.794Z,1520554388.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:09.183Z,1520554389.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:09.565Z,1520554389.565 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-03-09T00:13:09.602Z,1520554389.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:09.999Z,1520554389.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:10.392Z,1520554390.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:10.791Z,1520554390.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:11.196Z,1520554391.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:11.593Z,1520554391.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:11.697Z,1520554391.697 [Radio_Surface](INFO): Powering up
2018-03-09T00:13:11.993Z,1520554391.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:12.401Z,1520554392.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:12.782Z,1520554392.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:13.185Z,1520554393.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:13.587Z,1520554393.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:13.986Z,1520554393.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:14.394Z,1520554394.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:14.778Z,1520554394.778 [NAL9602](INFO): Powering down
2018-03-09T00:13:14.798Z,1520554394.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:15.190Z,1520554395.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:15.586Z,1520554395.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:15.994Z,1520554395.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:16.391Z,1520554396.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:16.793Z,1520554396.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:17.205Z,1520554397.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:17.594Z,1520554397.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:17.989Z,1520554397.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:18.394Z,1520554398.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:18.789Z,1520554398.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:19.185Z,1520554399.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:19.599Z,1520554399.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:19.990Z,1520554399.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:20.392Z,1520554400.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:20.797Z,1520554400.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:21.200Z,1520554401.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:21.596Z,1520554401.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:21.986Z,1520554401.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:22.389Z,1520554402.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:22.797Z,1520554402.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:23.187Z,1520554403.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:23.599Z,1520554403.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:23.982Z,1520554403.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:24.389Z,1520554404.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:24.787Z,1520554404.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:25.190Z,1520554405.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:25.601Z,1520554405.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:25.995Z,1520554405.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:26.397Z,1520554406.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:26.801Z,1520554406.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:27.188Z,1520554407.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:27.584Z,1520554407.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:27.987Z,1520554407.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:28.391Z,1520554408.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:28.783Z,1520554408.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:29.189Z,1520554409.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:29.593Z,1520554409.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:29.986Z,1520554409.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:30.393Z,1520554410.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:30.798Z,1520554410.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:31.191Z,1520554411.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:31.596Z,1520554411.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:31.987Z,1520554411.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:32.395Z,1520554412.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:32.798Z,1520554412.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:33.191Z,1520554413.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:33.587Z,1520554413.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:33.992Z,1520554413.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:34.393Z,1520554414.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:34.794Z,1520554414.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:35.197Z,1520554415.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:35.594Z,1520554415.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:35.993Z,1520554415.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:36.394Z,1520554416.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:36.794Z,1520554416.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:37.197Z,1520554417.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:37.596Z,1520554417.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:37.992Z,1520554417.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:38.393Z,1520554418.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:38.797Z,1520554418.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:39.193Z,1520554419.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:39.586Z,1520554419.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:39.989Z,1520554419.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:40.383Z,1520554420.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:40.787Z,1520554420.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:41.193Z,1520554421.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:41.588Z,1520554421.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:41.994Z,1520554421.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:42.396Z,1520554422.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:42.795Z,1520554422.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:43.193Z,1520554423.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:43.596Z,1520554423.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:43.984Z,1520554423.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:44.393Z,1520554424.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:44.810Z,1520554424.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:45.186Z,1520554425.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:45.587Z,1520554425.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:45.986Z,1520554425.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:46.384Z,1520554426.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:46.795Z,1520554426.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:47.198Z,1520554427.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:47.587Z,1520554427.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:47.993Z,1520554427.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:48.397Z,1520554428.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:48.791Z,1520554428.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:49.194Z,1520554429.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:49.600Z,1520554429.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:49.994Z,1520554429.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:50.384Z,1520554430.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:50.785Z,1520554430.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:51.185Z,1520554431.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:51.590Z,1520554431.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:51.997Z,1520554431.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:52.395Z,1520554432.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:52.801Z,1520554432.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:53.196Z,1520554433.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:53.586Z,1520554433.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:53.986Z,1520554433.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:54.397Z,1520554434.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:54.797Z,1520554434.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:55.194Z,1520554435.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:55.591Z,1520554435.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:55.995Z,1520554435.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:56.397Z,1520554436.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:56.795Z,1520554436.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:57.193Z,1520554437.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:57.593Z,1520554437.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:57.996Z,1520554437.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:58.394Z,1520554438.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:58.791Z,1520554438.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:59.204Z,1520554439.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:59.589Z,1520554439.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:13:59.997Z,1520554439.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:00.394Z,1520554440.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:00.794Z,1520554440.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:01.195Z,1520554441.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:01.587Z,1520554441.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:01.983Z,1520554441.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:02.388Z,1520554442.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:02.788Z,1520554442.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:03.186Z,1520554443.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:03.598Z,1520554443.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:03.987Z,1520554443.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:04.385Z,1520554444.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:04.787Z,1520554444.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:05.186Z,1520554445.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:05.584Z,1520554445.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:05.999Z,1520554445.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:06.402Z,1520554446.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:06.787Z,1520554446.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:07.193Z,1520554447.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:07.599Z,1520554447.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:07.994Z,1520554447.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:08.402Z,1520554448.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:08.809Z,1520554448.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:09.188Z,1520554449.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:09.566Z,1520554449.566 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-03-09T00:14:09.587Z,1520554449.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:09.994Z,1520554449.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:10.396Z,1520554450.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:10.795Z,1520554450.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:11.194Z,1520554451.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:11.594Z,1520554451.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:11.996Z,1520554451.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:12.390Z,1520554452.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:12.795Z,1520554452.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:13.198Z,1520554453.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:13.593Z,1520554453.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:13.988Z,1520554453.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:14.390Z,1520554454.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:14.788Z,1520554454.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:15.184Z,1520554455.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:15.589Z,1520554455.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:15.991Z,1520554455.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:16.395Z,1520554456.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:16.814Z,1520554456.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:17.189Z,1520554457.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:17.589Z,1520554457.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:17.983Z,1520554457.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:18.392Z,1520554458.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:18.788Z,1520554458.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:19.186Z,1520554459.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:19.602Z,1520554459.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:19.994Z,1520554459.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:20.395Z,1520554460.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:20.792Z,1520554460.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:21.191Z,1520554461.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:21.588Z,1520554461.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:21.989Z,1520554461.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:22.387Z,1520554462.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:22.786Z,1520554462.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:23.188Z,1520554463.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:23.595Z,1520554463.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:23.990Z,1520554463.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:24.394Z,1520554464.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:24.796Z,1520554464.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:25.185Z,1520554465.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:25.595Z,1520554465.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:25.993Z,1520554465.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:26.388Z,1520554466.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:26.802Z,1520554466.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:27.193Z,1520554467.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:27.587Z,1520554467.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:27.998Z,1520554467.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:28.397Z,1520554468.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:28.788Z,1520554468.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:29.190Z,1520554469.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:29.589Z,1520554469.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:29.987Z,1520554469.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:30.034Z,1520554470.034 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T00:14:30.034Z,1520554470.034 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-09T00:14:30.034Z,1520554470.034 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T00:14:30.056Z,1520554470.056 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T00:14:30.388Z,1520554470.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:30.447Z,1520554470.447 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T00:14:30.447Z,1520554470.447 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-09T00:14:30.790Z,1520554470.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:30.831Z,1520554470.831 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T00:14:30.832Z,1520554470.832 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T00:14:30.832Z,1520554470.832 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T00:14:31.192Z,1520554471.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:31.594Z,1520554471.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:31.993Z,1520554471.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:32.390Z,1520554472.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:32.793Z,1520554472.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:33.199Z,1520554473.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:33.593Z,1520554473.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:33.998Z,1520554473.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:34.382Z,1520554474.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:34.790Z,1520554474.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:35.187Z,1520554475.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:35.591Z,1520554475.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:35.989Z,1520554475.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:36.396Z,1520554476.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:36.792Z,1520554476.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:37.186Z,1520554477.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:37.600Z,1520554477.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:37.998Z,1520554477.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:38.393Z,1520554478.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:38.795Z,1520554478.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:39.189Z,1520554479.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:39.587Z,1520554479.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:39.987Z,1520554479.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:40.385Z,1520554480.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:40.797Z,1520554480.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:41.195Z,1520554481.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:41.601Z,1520554481.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:41.985Z,1520554481.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:42.400Z,1520554482.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:42.798Z,1520554482.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:43.191Z,1520554483.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:43.598Z,1520554483.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:43.997Z,1520554483.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:44.397Z,1520554484.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:44.793Z,1520554484.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:45.194Z,1520554485.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:45.589Z,1520554485.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:45.988Z,1520554485.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:46.388Z,1520554486.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:46.790Z,1520554486.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:47.198Z,1520554487.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:47.598Z,1520554487.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:47.986Z,1520554487.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:48.386Z,1520554488.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:48.794Z,1520554488.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:49.193Z,1520554489.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:49.598Z,1520554489.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:49.993Z,1520554489.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:50.389Z,1520554490.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:50.797Z,1520554490.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:51.185Z,1520554491.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:51.586Z,1520554491.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:51.988Z,1520554491.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:52.390Z,1520554492.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:52.788Z,1520554492.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:53.195Z,1520554493.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:53.598Z,1520554493.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:53.997Z,1520554493.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:54.394Z,1520554494.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:54.786Z,1520554494.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:55.182Z,1520554495.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:55.588Z,1520554495.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:55.993Z,1520554495.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:56.394Z,1520554496.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:56.796Z,1520554496.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:57.199Z,1520554497.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:57.594Z,1520554497.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:58.001Z,1520554498.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:58.398Z,1520554498.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:58.796Z,1520554498.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:59.195Z,1520554499.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:59.586Z,1520554499.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:14:59.979Z,1520554499.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:00.395Z,1520554500.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:00.795Z,1520554500.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:01.189Z,1520554501.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:01.587Z,1520554501.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:01.984Z,1520554501.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:02.390Z,1520554502.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:02.788Z,1520554502.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:03.196Z,1520554503.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:03.590Z,1520554503.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:03.997Z,1520554503.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:04.395Z,1520554504.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:04.803Z,1520554504.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:05.196Z,1520554505.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:05.597Z,1520554505.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:05.994Z,1520554505.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:06.397Z,1520554506.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:06.788Z,1520554506.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:07.186Z,1520554507.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:07.602Z,1520554507.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:07.997Z,1520554507.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:08.396Z,1520554508.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:08.797Z,1520554508.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:09.192Z,1520554509.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:09.598Z,1520554509.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:09.965Z,1520554509.965 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-03-09T00:15:09.988Z,1520554509.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:10.398Z,1520554510.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:10.786Z,1520554510.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:11.188Z,1520554511.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:11.592Z,1520554511.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:11.990Z,1520554511.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:12.394Z,1520554512.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:12.789Z,1520554512.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:13.188Z,1520554513.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:13.594Z,1520554513.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:13.991Z,1520554513.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:14.393Z,1520554514.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:14.795Z,1520554514.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:15.198Z,1520554515.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:15.586Z,1520554515.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:16.000Z,1520554516.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:16.396Z,1520554516.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:16.786Z,1520554516.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:17.186Z,1520554517.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:17.593Z,1520554517.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:17.989Z,1520554517.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:18.387Z,1520554518.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:18.794Z,1520554518.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:19.190Z,1520554519.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:19.598Z,1520554519.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:19.995Z,1520554519.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:20.386Z,1520554520.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:20.787Z,1520554520.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:21.202Z,1520554521.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:21.592Z,1520554521.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:21.997Z,1520554521.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:22.392Z,1520554522.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:22.788Z,1520554522.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:23.187Z,1520554523.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:23.594Z,1520554523.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:23.994Z,1520554523.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:24.395Z,1520554524.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:24.798Z,1520554524.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:25.191Z,1520554525.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:25.596Z,1520554525.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:25.994Z,1520554525.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:26.397Z,1520554526.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:26.796Z,1520554526.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:27.197Z,1520554527.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:27.596Z,1520554527.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:27.996Z,1520554527.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:28.386Z,1520554528.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:28.789Z,1520554528.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:29.198Z,1520554529.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:29.593Z,1520554529.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:29.994Z,1520554529.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:30.400Z,1520554530.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:30.803Z,1520554530.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:31.184Z,1520554531.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:31.586Z,1520554531.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:31.979Z,1520554531.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:32.389Z,1520554532.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:32.787Z,1520554532.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:33.183Z,1520554533.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:33.583Z,1520554533.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:34.011Z,1520554534.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:34.393Z,1520554534.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:34.791Z,1520554534.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:35.200Z,1520554535.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:35.587Z,1520554535.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:35.987Z,1520554535.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:36.386Z,1520554536.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:36.793Z,1520554536.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:37.195Z,1520554537.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:37.596Z,1520554537.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:37.986Z,1520554537.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:38.400Z,1520554538.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:38.799Z,1520554538.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:39.194Z,1520554539.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:39.593Z,1520554539.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:39.987Z,1520554539.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:40.401Z,1520554540.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:40.787Z,1520554540.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:41.194Z,1520554541.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:41.586Z,1520554541.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:41.999Z,1520554541.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:42.391Z,1520554542.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:42.789Z,1520554542.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:43.183Z,1520554543.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:43.589Z,1520554543.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:43.994Z,1520554543.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:44.394Z,1520554544.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:44.793Z,1520554544.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:45.190Z,1520554545.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:45.593Z,1520554545.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:45.998Z,1520554545.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:46.396Z,1520554546.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:46.802Z,1520554546.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:47.196Z,1520554547.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:47.583Z,1520554547.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:48.001Z,1520554548.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:48.388Z,1520554548.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:48.787Z,1520554548.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:49.190Z,1520554549.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:49.593Z,1520554549.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:49.990Z,1520554549.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:50.394Z,1520554550.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:50.801Z,1520554550.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:51.179Z,1520554551.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:51.589Z,1520554551.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:51.987Z,1520554551.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:52.390Z,1520554552.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:52.797Z,1520554552.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:53.196Z,1520554553.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:53.593Z,1520554553.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:53.994Z,1520554553.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:54.393Z,1520554554.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:54.789Z,1520554554.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:55.195Z,1520554555.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:55.594Z,1520554555.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:55.984Z,1520554555.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:56.393Z,1520554556.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:56.797Z,1520554556.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:57.190Z,1520554557.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:57.600Z,1520554557.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:57.995Z,1520554557.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:58.397Z,1520554558.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:58.795Z,1520554558.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:59.193Z,1520554559.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:59.593Z,1520554559.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:15:59.986Z,1520554559.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:00.386Z,1520554560.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:00.782Z,1520554560.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:01.199Z,1520554561.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:01.597Z,1520554561.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:01.991Z,1520554561.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:02.396Z,1520554562.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:02.796Z,1520554562.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:03.188Z,1520554563.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:03.588Z,1520554563.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:03.988Z,1520554563.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:04.389Z,1520554564.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:04.797Z,1520554564.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:05.191Z,1520554565.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:05.597Z,1520554565.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:05.991Z,1520554565.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:06.393Z,1520554566.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:06.794Z,1520554566.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:07.192Z,1520554567.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:07.597Z,1520554567.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:07.999Z,1520554567.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:08.387Z,1520554568.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:08.788Z,1520554568.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:09.190Z,1520554569.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:09.587Z,1520554569.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:09.970Z,1520554569.970 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-03-09T00:16:09.995Z,1520554569.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:10.391Z,1520554570.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:10.800Z,1520554570.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:11.187Z,1520554571.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:11.586Z,1520554571.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:11.984Z,1520554571.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:12.404Z,1520554572.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:12.789Z,1520554572.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:12.822Z,1520554572.822 [Radio_Surface](INFO): Powering down
2018-03-09T00:16:13.186Z,1520554573.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:13.587Z,1520554573.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:13.988Z,1520554573.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:14.392Z,1520554574.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:14.802Z,1520554574.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:15.192Z,1520554575.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:15.597Z,1520554575.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:15.987Z,1520554575.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:16.386Z,1520554576.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:16.788Z,1520554576.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:17.188Z,1520554577.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:17.590Z,1520554577.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:17.989Z,1520554577.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:18.394Z,1520554578.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:18.795Z,1520554578.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:18.901Z,1520554578.901 [Radio_Surface](INFO): Powering up
2018-03-09T00:16:19.195Z,1520554579.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:19.601Z,1520554579.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:19.993Z,1520554579.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:20.397Z,1520554580.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:20.795Z,1520554580.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:21.183Z,1520554581.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:21.579Z,1520554581.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:21.995Z,1520554581.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:22.395Z,1520554582.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:22.793Z,1520554582.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:23.193Z,1520554583.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:23.597Z,1520554583.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:23.987Z,1520554583.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:24.394Z,1520554584.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:24.788Z,1520554584.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:25.186Z,1520554585.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:25.595Z,1520554585.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:25.990Z,1520554585.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:26.398Z,1520554586.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:26.795Z,1520554586.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:27.198Z,1520554587.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:27.586Z,1520554587.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:28.001Z,1520554588.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:28.396Z,1520554588.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:28.795Z,1520554588.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:29.207Z,1520554589.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:29.588Z,1520554589.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:29.985Z,1520554589.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:30.387Z,1520554590.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:30.787Z,1520554590.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:31.186Z,1520554591.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:31.594Z,1520554591.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:31.994Z,1520554591.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:32.390Z,1520554592.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:32.792Z,1520554592.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:33.201Z,1520554593.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:33.594Z,1520554593.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:34.001Z,1520554594.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:34.402Z,1520554594.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:34.796Z,1520554594.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:35.187Z,1520554595.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:35.598Z,1520554595.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:35.993Z,1520554595.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:36.399Z,1520554596.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:36.787Z,1520554596.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:37.186Z,1520554597.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:37.587Z,1520554597.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:37.988Z,1520554597.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:38.387Z,1520554598.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:38.793Z,1520554598.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:39.189Z,1520554599.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:39.589Z,1520554599.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:39.993Z,1520554599.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:40.395Z,1520554600.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:40.798Z,1520554600.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:41.197Z,1520554601.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:41.598Z,1520554601.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:41.986Z,1520554601.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:42.387Z,1520554602.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:42.799Z,1520554602.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:43.190Z,1520554603.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:43.594Z,1520554603.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:43.991Z,1520554603.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:44.388Z,1520554604.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:44.802Z,1520554604.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:45.184Z,1520554605.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:45.588Z,1520554605.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:45.990Z,1520554605.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:46.388Z,1520554606.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:46.786Z,1520554606.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:47.195Z,1520554607.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:47.585Z,1520554607.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:47.994Z,1520554607.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:48.393Z,1520554608.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:48.787Z,1520554608.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:49.189Z,1520554609.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:49.593Z,1520554609.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:49.986Z,1520554609.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:50.401Z,1520554610.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:50.796Z,1520554610.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:51.187Z,1520554611.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:51.586Z,1520554611.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:51.988Z,1520554611.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:52.394Z,1520554612.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:52.793Z,1520554612.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:53.191Z,1520554613.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:53.580Z,1520554613.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:53.996Z,1520554613.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:54.392Z,1520554614.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:54.790Z,1520554614.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:55.195Z,1520554615.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:55.597Z,1520554615.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:55.987Z,1520554615.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:56.394Z,1520554616.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:56.794Z,1520554616.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:57.195Z,1520554617.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:57.587Z,1520554617.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:58.002Z,1520554618.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:58.386Z,1520554618.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:58.789Z,1520554618.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:59.186Z,1520554619.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:59.583Z,1520554619.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:16:59.993Z,1520554619.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:00.398Z,1520554620.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:00.795Z,1520554620.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:01.193Z,1520554621.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:01.587Z,1520554621.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:01.988Z,1520554621.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:02.387Z,1520554622.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:02.806Z,1520554622.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:03.185Z,1520554623.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:03.595Z,1520554623.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:03.996Z,1520554623.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:04.390Z,1520554624.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:04.790Z,1520554624.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:05.189Z,1520554625.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:05.594Z,1520554625.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:05.994Z,1520554625.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:06.395Z,1520554626.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:06.790Z,1520554626.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:07.193Z,1520554627.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:07.591Z,1520554627.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:07.998Z,1520554627.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:08.392Z,1520554628.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:08.797Z,1520554628.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:09.183Z,1520554629.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:09.594Z,1520554629.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:09.994Z,1520554629.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:10.366Z,1520554630.366 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-03-09T00:17:10.402Z,1520554630.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:10.795Z,1520554630.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:11.187Z,1520554631.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:11.587Z,1520554631.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:11.993Z,1520554631.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:12.394Z,1520554632.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:12.794Z,1520554632.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:13.196Z,1520554633.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:13.594Z,1520554633.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:13.993Z,1520554633.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:14.393Z,1520554634.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:14.795Z,1520554634.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:15.195Z,1520554635.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:15.602Z,1520554635.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:16.006Z,1520554636.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:16.401Z,1520554636.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:16.797Z,1520554636.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:17.186Z,1520554637.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:17.587Z,1520554637.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:17.993Z,1520554637.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:18.398Z,1520554638.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:18.790Z,1520554638.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:19.198Z,1520554639.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:19.597Z,1520554639.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:19.987Z,1520554639.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:20.398Z,1520554640.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:20.787Z,1520554640.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:21.189Z,1520554641.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:21.587Z,1520554641.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:21.994Z,1520554641.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:22.388Z,1520554642.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:22.793Z,1520554642.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:23.189Z,1520554643.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:23.591Z,1520554643.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:23.994Z,1520554643.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:24.400Z,1520554644.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:24.794Z,1520554644.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:25.183Z,1520554645.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:25.587Z,1520554645.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:25.993Z,1520554645.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:26.393Z,1520554646.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:26.794Z,1520554646.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:27.194Z,1520554647.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:27.589Z,1520554647.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:27.992Z,1520554647.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:28.034Z,1520554648.034 [Radio_Surface](INFO): Powering down
2018-03-09T00:17:28.393Z,1520554648.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:28.787Z,1520554648.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:29.188Z,1520554649.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:29.586Z,1520554649.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:29.990Z,1520554649.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:30.400Z,1520554650.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:30.795Z,1520554650.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:31.193Z,1520554651.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:31.211Z,1520554651.211 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T00:17:31.212Z,1520554651.212 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-09T00:17:31.212Z,1520554651.212 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T00:17:31.237Z,1520554651.237 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T00:17:31.586Z,1520554651.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:31.634Z,1520554651.634 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T00:17:31.634Z,1520554651.634 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-09T00:17:31.987Z,1520554651.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:32.019Z,1520554652.019 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T00:17:32.020Z,1520554652.020 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T00:17:32.020Z,1520554652.020 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T00:17:32.399Z,1520554652.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:32.797Z,1520554652.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:33.189Z,1520554653.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:33.593Z,1520554653.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:33.997Z,1520554653.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:34.105Z,1520554654.105 [Radio_Surface](INFO): Powering up
2018-03-09T00:17:34.394Z,1520554654.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:34.794Z,1520554654.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:35.187Z,1520554655.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:35.597Z,1520554655.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:35.987Z,1520554655.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:36.385Z,1520554656.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:36.787Z,1520554656.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:37.186Z,1520554657.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:37.599Z,1520554657.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:37.990Z,1520554657.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:38.396Z,1520554658.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:38.797Z,1520554658.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:39.186Z,1520554659.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:39.583Z,1520554659.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:39.987Z,1520554659.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:40.393Z,1520554660.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:40.790Z,1520554660.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:41.193Z,1520554661.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:41.589Z,1520554661.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:41.997Z,1520554661.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:42.398Z,1520554662.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:42.795Z,1520554662.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:43.194Z,1520554663.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:43.588Z,1520554663.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:43.998Z,1520554663.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:44.386Z,1520554664.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:44.800Z,1520554664.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:44.832Z,1520554664.832 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-09T00:17:44.832Z,1520554664.832 [Default:CheckIn:C.Wait] Stopped
2018-03-09T00:17:44.832Z,1520554664.832 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-09T00:17:44.832Z,1520554664.832 [Default:CheckIn:D] Running Loop=1
2018-03-09T00:17:45.196Z,1520554665.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:45.237Z,1520554665.237 [Default:CheckIn:D] Stopped
2018-03-09T00:17:45.237Z,1520554665.237 [Default:CheckIn:E] Running Loop=1
2018-03-09T00:17:45.591Z,1520554665.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:45.611Z,1520554665.611 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 992.007161 min 
2018-03-09T00:17:45.611Z,1520554665.611 [Default:CheckIn:E] Stopped
2018-03-09T00:17:45.612Z,1520554665.612 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-09T00:17:45.612Z,1520554665.612 [Default:CheckIn] Stopped
2018-03-09T00:17:45.612Z,1520554665.612 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-09T00:17:45.612Z,1520554665.612 [Default:CheckIn](INFO): Running loop #100
2018-03-09T00:17:45.612Z,1520554665.612 [Default:CheckIn] Running Loop=100
2018-03-09T00:17:45.612Z,1520554665.612 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-09T00:17:45.612Z,1520554665.612 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-09T00:17:45.986Z,1520554665.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:46.373Z,1520554666.373 [NAL9602](INFO): Powering up
2018-03-09T00:17:46.393Z,1520554666.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:46.794Z,1520554666.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:47.197Z,1520554667.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:47.594Z,1520554667.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:48.001Z,1520554668.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:48.399Z,1520554668.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:48.795Z,1520554668.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:49.192Z,1520554669.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:49.597Z,1520554669.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:49.991Z,1520554669.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:50.387Z,1520554670.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:50.793Z,1520554670.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:51.197Z,1520554671.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:51.587Z,1520554671.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:52.005Z,1520554672.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:52.390Z,1520554672.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:52.787Z,1520554672.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:53.210Z,1520554673.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:53.598Z,1520554673.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:53.991Z,1520554673.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:54.393Z,1520554674.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:54.796Z,1520554674.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:55.195Z,1520554675.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:55.601Z,1520554675.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:56.002Z,1520554676.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:56.396Z,1520554676.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:56.796Z,1520554676.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:57.215Z,1520554677.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:57.575Z,1520554677.575 [NAL9602](INFO): NAL9602 initialized
2018-03-09T00:17:57.595Z,1520554677.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:57.996Z,1520554677.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:58.420Z,1520554678.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:58.809Z,1520554678.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:59.207Z,1520554679.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:59.590Z,1520554679.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:17:59.992Z,1520554679.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:00.418Z,1520554680.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:00.795Z,1520554680.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:01.197Z,1520554681.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:01.597Z,1520554681.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:01.991Z,1520554681.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:02.393Z,1520554682.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:02.794Z,1520554682.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:03.197Z,1520554683.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:03.588Z,1520554683.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:03.987Z,1520554683.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:04.389Z,1520554684.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:04.792Z,1520554684.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:05.187Z,1520554685.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:05.589Z,1520554685.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:05.988Z,1520554685.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:06.406Z,1520554686.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:06.797Z,1520554686.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:07.210Z,1520554687.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:07.595Z,1520554687.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:07.990Z,1520554687.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:08.395Z,1520554688.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:08.800Z,1520554688.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:09.197Z,1520554689.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:09.597Z,1520554689.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:09.986Z,1520554689.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:10.388Z,1520554690.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:10.765Z,1520554690.765 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-03-09T00:18:10.802Z,1520554690.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:11.217Z,1520554691.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:11.590Z,1520554691.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:11.990Z,1520554691.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:12.402Z,1520554692.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:12.793Z,1520554692.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:13.194Z,1520554693.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:13.369Z,1520554693.369 [CommandLine](IMPORTANT): got command maintain clear
2018-03-09T00:18:13.597Z,1520554693.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:13.662Z,1520554693.662 [controlThread](DEBUG): Component order: CycleStarter,Aanderaa_O2,ESPComponent,PAR_Licor,DataOverHttps,Depth_Keller,DropWeight,NAL9602,Onboard,DAT,PNI_TCM,BPC1,PAR_Licor,Depth_Keller,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2018-03-09T00:18:13.998Z,1520554693.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:14.388Z,1520554694.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:14.790Z,1520554694.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:15.182Z,1520554695.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:15.586Z,1520554695.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:16.064Z,1520554696.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:16.144Z,1520554696.144 [Reporter](INFO): platform_mass_position -0.018927 m
2018-03-09T00:18:16.462Z,1520554696.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:16.553Z,1520554696.553 [Reporter](INFO): platform_mass_position -0.018609 m
2018-03-09T00:18:16.865Z,1520554696.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:16.948Z,1520554696.948 [Reporter](INFO): platform_mass_position -0.018299 m
2018-03-09T00:18:17.254Z,1520554697.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:17.348Z,1520554697.348 [Reporter](INFO): platform_mass_position -0.017985 m
2018-03-09T00:18:17.658Z,1520554697.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:17.812Z,1520554697.812 [Reporter](INFO): platform_mass_position -0.017621 m
2018-03-09T00:18:18.050Z,1520554698.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:18.151Z,1520554698.151 [Reporter](INFO): platform_mass_position -0.017355 m
2018-03-09T00:18:18.454Z,1520554698.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:18.600Z,1520554698.600 [Reporter](INFO): platform_mass_position -0.017004 m
2018-03-09T00:18:18.863Z,1520554698.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:18.979Z,1520554698.979 [Reporter](INFO): platform_mass_position -0.016709 m
2018-03-09T00:18:19.255Z,1520554699.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:19.383Z,1520554699.383 [Reporter](INFO): platform_mass_position -0.016389 m
2018-03-09T00:18:19.701Z,1520554699.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:19.784Z,1520554699.784 [Reporter](INFO): platform_mass_position -0.016083 m
2018-03-09T00:18:20.094Z,1520554700.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:20.199Z,1520554700.199 [Reporter](INFO): platform_mass_position -0.015750 m
2018-03-09T00:18:20.454Z,1520554700.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:20.552Z,1520554700.552 [Reporter](INFO): platform_mass_position -0.015474 m
2018-03-09T00:18:20.854Z,1520554700.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:20.975Z,1520554700.975 [Reporter](INFO): platform_mass_position -0.015145 m
2018-03-09T00:18:21.255Z,1520554701.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:21.363Z,1520554701.363 [Reporter](INFO): platform_mass_position -0.014838 m
2018-03-09T00:18:21.654Z,1520554701.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:21.767Z,1520554701.767 [Reporter](INFO): platform_mass_position -0.014521 m
2018-03-09T00:18:22.057Z,1520554702.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:22.159Z,1520554702.159 [Reporter](INFO): platform_mass_position -0.014214 m
2018-03-09T00:18:22.456Z,1520554702.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:22.564Z,1520554702.564 [Reporter](INFO): platform_mass_position -0.013897 m
2018-03-09T00:18:22.856Z,1520554702.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:22.959Z,1520554702.959 [Reporter](INFO): platform_mass_position -0.013587 m
2018-03-09T00:18:23.262Z,1520554703.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:23.363Z,1520554703.363 [Reporter](INFO): platform_mass_position -0.013271 m
2018-03-09T00:18:23.663Z,1520554703.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:23.747Z,1520554703.747 [Reporter](INFO): platform_mass_position -0.012997 m
2018-03-09T00:18:24.055Z,1520554704.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:24.464Z,1520554704.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:24.864Z,1520554704.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:25.267Z,1520554705.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:25.657Z,1520554705.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:26.051Z,1520554706.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:26.467Z,1520554706.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:26.855Z,1520554706.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:27.257Z,1520554707.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:27.654Z,1520554707.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:28.058Z,1520554708.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:28.454Z,1520554708.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:28.854Z,1520554708.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:29.254Z,1520554709.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:29.655Z,1520554709.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:30.053Z,1520554710.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:30.458Z,1520554710.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:30.810Z,1520554710.810 [CommandLine](IMPORTANT): got command show variable limitAft
2018-03-09T00:18:30.877Z,1520554710.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:30.901Z,1520554710.901 [CommandLine](IMPORTANT): VerticalControl.massPositionLimitAft (millimeter)
2018-03-09T00:18:31.254Z,1520554711.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:31.659Z,1520554711.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:32.059Z,1520554712.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:32.462Z,1520554712.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:32.859Z,1520554712.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:33.261Z,1520554713.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:33.647Z,1520554713.647 [NAL9602](INFO): SBD MO Status=2, MOMSN=4908, MT Status=2, MTMSN=0
2018-03-09T00:18:33.647Z,1520554713.647 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-09T00:18:33.664Z,1520554713.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:34.089Z,1520554714.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:34.465Z,1520554714.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:34.862Z,1520554714.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:35.265Z,1520554715.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:35.666Z,1520554715.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:36.058Z,1520554716.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:36.464Z,1520554716.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:36.858Z,1520554716.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:37.258Z,1520554717.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:37.666Z,1520554717.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:38.072Z,1520554718.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:38.479Z,1520554718.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:38.857Z,1520554718.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:39.272Z,1520554719.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:39.654Z,1520554719.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:40.054Z,1520554720.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:40.450Z,1520554720.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:40.854Z,1520554720.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:41.265Z,1520554721.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:41.654Z,1520554721.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:42.055Z,1520554722.055 [CommandLine](IMPORTANT): got command get VerticalControl.massPositionLimitAft meter
2018-03-09T00:18:42.056Z,1520554722.056 [CommandLine](IMPORTANT): VerticalControl.massPositionLimitAft -0.019000 m
2018-03-09T00:18:42.064Z,1520554722.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:42.462Z,1520554722.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:42.862Z,1520554722.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:43.262Z,1520554723.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:43.664Z,1520554723.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:44.064Z,1520554724.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:44.462Z,1520554724.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:44.860Z,1520554724.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:45.268Z,1520554725.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:45.649Z,1520554725.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:46.093Z,1520554726.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:46.464Z,1520554726.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:46.862Z,1520554726.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:47.257Z,1520554727.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:47.675Z,1520554727.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:48.052Z,1520554728.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:48.457Z,1520554728.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:48.855Z,1520554728.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:49.252Z,1520554729.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:49.658Z,1520554729.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:50.058Z,1520554730.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:50.450Z,1520554730.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:50.854Z,1520554730.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:51.257Z,1520554731.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:51.652Z,1520554731.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:52.058Z,1520554732.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:52.454Z,1520554732.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:52.857Z,1520554732.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:53.256Z,1520554733.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:53.658Z,1520554733.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:54.055Z,1520554734.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:54.462Z,1520554734.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:54.859Z,1520554734.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:55.268Z,1520554735.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:55.665Z,1520554735.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:56.064Z,1520554736.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:56.457Z,1520554736.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:56.860Z,1520554736.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:57.259Z,1520554737.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:57.657Z,1520554737.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:58.062Z,1520554738.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:58.467Z,1520554738.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:58.865Z,1520554738.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:59.266Z,1520554739.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:18:59.639Z,1520554739.639 [NAL9602](INFO): SBD MO Status=2, MOMSN=4908, MT Status=2, MTMSN=0
2018-03-09T00:18:59.640Z,1520554739.640 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-09T00:18:59.666Z,1520554739.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:00.075Z,1520554740.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:00.453Z,1520554740.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:00.855Z,1520554740.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:01.252Z,1520554741.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:01.663Z,1520554741.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:02.059Z,1520554742.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:02.459Z,1520554742.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:02.859Z,1520554742.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:03.262Z,1520554743.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:03.659Z,1520554743.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:04.085Z,1520554744.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:04.468Z,1520554744.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:04.865Z,1520554744.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:05.262Z,1520554745.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:05.659Z,1520554745.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:06.056Z,1520554746.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:06.457Z,1520554746.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:06.850Z,1520554746.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:07.252Z,1520554747.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:07.657Z,1520554747.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:08.055Z,1520554748.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:08.500Z,1520554748.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:08.888Z,1520554748.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:09.254Z,1520554749.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:09.649Z,1520554749.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:10.054Z,1520554750.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:10.433Z,1520554750.433 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-03-09T00:19:10.458Z,1520554750.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:10.863Z,1520554750.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:11.263Z,1520554751.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:11.666Z,1520554751.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:12.063Z,1520554752.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:12.473Z,1520554752.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:12.881Z,1520554752.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:13.282Z,1520554753.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:13.673Z,1520554753.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:14.059Z,1520554754.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:14.459Z,1520554754.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:14.915Z,1520554754.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:15.251Z,1520554755.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:15.649Z,1520554755.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:16.058Z,1520554756.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:16.462Z,1520554756.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:16.866Z,1520554756.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:17.276Z,1520554757.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:17.707Z,1520554757.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:18.052Z,1520554758.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:18.466Z,1520554758.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:18.858Z,1520554758.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:19.252Z,1520554759.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:19.658Z,1520554759.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:20.061Z,1520554760.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:20.461Z,1520554760.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:20.857Z,1520554760.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:21.250Z,1520554761.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:21.652Z,1520554761.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:22.054Z,1520554762.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:22.455Z,1520554762.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:22.858Z,1520554762.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:23.254Z,1520554763.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:23.657Z,1520554763.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:24.058Z,1520554764.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:24.463Z,1520554764.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:24.864Z,1520554764.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:25.263Z,1520554765.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:25.666Z,1520554765.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:26.061Z,1520554766.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:26.458Z,1520554766.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:26.867Z,1520554766.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:27.262Z,1520554767.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:27.649Z,1520554767.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:28.054Z,1520554768.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:28.450Z,1520554768.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:28.871Z,1520554768.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:29.285Z,1520554769.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:29.654Z,1520554769.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:30.052Z,1520554770.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:30.454Z,1520554770.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:30.850Z,1520554770.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:31.254Z,1520554771.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:31.654Z,1520554771.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:32.051Z,1520554772.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:32.454Z,1520554772.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:32.865Z,1520554772.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:33.265Z,1520554773.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:33.656Z,1520554773.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:34.066Z,1520554774.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:34.450Z,1520554774.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:34.857Z,1520554774.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:35.257Z,1520554775.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:35.665Z,1520554775.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:36.061Z,1520554776.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:36.509Z,1520554776.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:36.855Z,1520554776.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:37.300Z,1520554777.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:37.677Z,1520554777.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:38.058Z,1520554778.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:38.454Z,1520554778.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:38.859Z,1520554778.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:39.257Z,1520554779.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:39.653Z,1520554779.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:40.066Z,1520554780.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:40.458Z,1520554780.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:40.853Z,1520554780.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:41.262Z,1520554781.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:41.678Z,1520554781.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:42.068Z,1520554782.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:42.457Z,1520554782.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:42.865Z,1520554782.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:43.252Z,1520554783.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:43.658Z,1520554783.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:44.054Z,1520554784.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:44.454Z,1520554784.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:44.854Z,1520554784.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:45.258Z,1520554785.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:45.652Z,1520554785.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:46.055Z,1520554786.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:46.458Z,1520554786.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:46.862Z,1520554786.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:47.262Z,1520554787.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:47.661Z,1520554787.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:48.054Z,1520554788.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:48.464Z,1520554788.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:48.863Z,1520554788.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:49.257Z,1520554789.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:49.665Z,1520554789.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:50.057Z,1520554790.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:50.476Z,1520554790.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:50.896Z,1520554790.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:51.266Z,1520554791.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:51.652Z,1520554791.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:52.077Z,1520554792.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:52.483Z,1520554792.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:52.849Z,1520554792.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:53.261Z,1520554793.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:53.658Z,1520554793.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:54.053Z,1520554794.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:54.466Z,1520554794.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:54.861Z,1520554794.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:55.260Z,1520554795.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:55.662Z,1520554795.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:56.063Z,1520554796.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:56.466Z,1520554796.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:56.860Z,1520554796.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:57.263Z,1520554797.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:57.663Z,1520554797.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:58.065Z,1520554798.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:58.463Z,1520554798.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:58.861Z,1520554798.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:59.257Z,1520554799.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:19:59.663Z,1520554799.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:00.055Z,1520554800.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:00.488Z,1520554800.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:00.854Z,1520554800.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:01.259Z,1520554801.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:01.658Z,1520554801.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:02.064Z,1520554802.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:02.462Z,1520554802.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:02.867Z,1520554802.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:03.263Z,1520554803.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:03.662Z,1520554803.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:04.061Z,1520554804.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:04.468Z,1520554804.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:04.868Z,1520554804.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:05.268Z,1520554805.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:05.654Z,1520554805.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:06.050Z,1520554806.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:06.454Z,1520554806.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:06.850Z,1520554806.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:07.249Z,1520554807.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:07.654Z,1520554807.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:08.059Z,1520554808.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:08.462Z,1520554808.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:08.858Z,1520554808.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:09.261Z,1520554809.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:09.659Z,1520554809.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:10.065Z,1520554810.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:10.458Z,1520554810.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:10.853Z,1520554810.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:11.238Z,1520554811.238 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-03-09T00:20:11.283Z,1520554811.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:11.650Z,1520554811.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:12.066Z,1520554812.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:12.467Z,1520554812.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:12.863Z,1520554812.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:13.235Z,1520554813.235 [NAL9602](INFO): SBD MO Status=2, MOMSN=4908, MT Status=2, MTMSN=0
2018-03-09T00:20:13.235Z,1520554813.235 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-09T00:20:13.293Z,1520554813.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:13.673Z,1520554813.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:14.050Z,1520554814.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:14.467Z,1520554814.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:14.863Z,1520554814.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:15.259Z,1520554815.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:15.658Z,1520554815.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:16.062Z,1520554816.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:16.463Z,1520554816.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:16.858Z,1520554816.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:17.263Z,1520554817.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:17.686Z,1520554817.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:18.081Z,1520554818.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:18.479Z,1520554818.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:18.881Z,1520554818.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:19.266Z,1520554819.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:19.657Z,1520554819.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:20.066Z,1520554820.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:20.454Z,1520554820.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:20.854Z,1520554820.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:21.251Z,1520554821.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:21.658Z,1520554821.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:22.054Z,1520554822.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:22.458Z,1520554822.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:22.901Z,1520554822.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:23.254Z,1520554823.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:23.650Z,1520554823.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:24.063Z,1520554824.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:24.465Z,1520554824.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:24.865Z,1520554824.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:25.265Z,1520554825.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:25.657Z,1520554825.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:26.051Z,1520554826.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:26.466Z,1520554826.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:26.857Z,1520554826.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:27.267Z,1520554827.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:27.654Z,1520554827.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:28.055Z,1520554828.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:28.450Z,1520554828.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:28.843Z,1520554828.843 [NAL9602](INFO): SBD MO Status=0, MOMSN=4908, MT Status=0, MTMSN=0
2018-03-09T00:20:28.843Z,1520554828.843 [NAL9602](INFO): No messages in MT queue
2018-03-09T00:20:28.860Z,1520554828.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:29.262Z,1520554829.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:29.704Z,1520554829.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:30.045Z,1520554830.045 [NAL9602](INFO): GPS fix at 20180309T001949: (21.316539, -157.875900)
2018-03-09T00:20:30.061Z,1520554830.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:30.147Z,1520554830.147 [Default:CheckIn:Read_GPS] Stopped
2018-03-09T00:20:30.147Z,1520554830.147 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-09T00:20:30.465Z,1520554830.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:30.850Z,1520554830.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:31.257Z,1520554831.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:31.657Z,1520554831.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:32.107Z,1520554832.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:32.126Z,1520554832.126 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T00:20:32.126Z,1520554832.126 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-09T00:20:32.126Z,1520554832.126 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T00:20:32.138Z,1520554832.138 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T00:20:32.501Z,1520554832.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:32.536Z,1520554832.536 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T00:20:32.536Z,1520554832.536 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-09T00:20:32.855Z,1520554832.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:32.926Z,1520554832.926 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T00:20:32.926Z,1520554832.926 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T00:20:32.926Z,1520554832.926 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T00:20:33.301Z,1520554833.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:33.854Z,1520554833.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:36.087Z,1520554836.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:36.203Z,1520554836.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:36.577Z,1520554836.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:36.985Z,1520554836.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:37.382Z,1520554837.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:37.782Z,1520554837.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:38.170Z,1520554838.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:38.595Z,1520554838.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:38.994Z,1520554838.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:39.370Z,1520554839.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:39.774Z,1520554839.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:40.194Z,1520554840.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:40.570Z,1520554840.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:41.058Z,1520554841.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:41.374Z,1520554841.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:41.774Z,1520554841.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:42.175Z,1520554842.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:42.576Z,1520554842.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:42.974Z,1520554842.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:43.376Z,1520554843.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:43.779Z,1520554843.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:44.178Z,1520554844.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:44.574Z,1520554844.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:44.974Z,1520554844.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:45.374Z,1520554845.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:45.774Z,1520554845.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:46.178Z,1520554846.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:46.574Z,1520554846.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:46.979Z,1520554846.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:47.374Z,1520554847.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:47.782Z,1520554847.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:48.175Z,1520554848.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:48.586Z,1520554848.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:48.985Z,1520554848.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:49.380Z,1520554849.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:49.786Z,1520554849.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:50.183Z,1520554850.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:50.587Z,1520554850.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:50.959Z,1520554850.959 [NAL9602](INFO): SBD MO Status=2, MOMSN=4909, MT Status=2, MTMSN=0
2018-03-09T00:20:50.959Z,1520554850.959 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-09T00:20:50.980Z,1520554850.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:51.382Z,1520554851.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:51.784Z,1520554851.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:52.199Z,1520554852.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:52.575Z,1520554852.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:52.971Z,1520554852.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:53.375Z,1520554853.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:53.775Z,1520554853.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:54.170Z,1520554854.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:54.574Z,1520554854.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:54.974Z,1520554854.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:55.399Z,1520554855.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:55.901Z,1520554855.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:56.170Z,1520554856.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:56.577Z,1520554856.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:56.000Z,1520554857.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:57.370Z,1520554857.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:57.777Z,1520554857.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:58.179Z,1520554858.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:58.579Z,1520554858.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:58.979Z,1520554858.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:59.380Z,1520554859.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:20:59.781Z,1520554859.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:00.183Z,1520554860.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:00.577Z,1520554860.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:00.980Z,1520554860.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:01.387Z,1520554861.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:01.794Z,1520554861.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:02.183Z,1520554862.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:02.583Z,1520554862.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:02.981Z,1520554862.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:03.379Z,1520554863.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:03.783Z,1520554863.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:04.192Z,1520554864.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:04.688Z,1520554864.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:04.977Z,1520554864.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:05.375Z,1520554865.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:05.800Z,1520554865.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:06.174Z,1520554866.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:06.574Z,1520554866.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:06.970Z,1520554866.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:07.395Z,1520554867.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:07.774Z,1520554867.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:08.194Z,1520554868.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:08.594Z,1520554868.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:09.098Z,1520554869.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:09.370Z,1520554869.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:09.774Z,1520554869.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:10.209Z,1520554870.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:10.578Z,1520554870.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:10.977Z,1520554870.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:11.353Z,1520554871.353 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-03-09T00:21:11.378Z,1520554871.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:11.774Z,1520554871.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:12.174Z,1520554872.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:12.589Z,1520554872.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:13.086Z,1520554873.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:13.374Z,1520554873.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:13.780Z,1520554873.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:14.198Z,1520554874.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:14.590Z,1520554874.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:14.985Z,1520554874.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:15.377Z,1520554875.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:15.782Z,1520554875.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:16.191Z,1520554876.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:16.585Z,1520554876.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:16.994Z,1520554876.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:18.842Z,1520554878.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:19.009Z,1520554879.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:19.379Z,1520554879.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:19.812Z,1520554879.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:20.189Z,1520554880.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:20.693Z,1520554880.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:20.980Z,1520554880.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:21.382Z,1520554881.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:21.801Z,1520554881.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:22.178Z,1520554882.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:22.587Z,1520554882.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:22.969Z,1520554882.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:23.377Z,1520554883.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:23.786Z,1520554883.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:24.170Z,1520554884.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:24.597Z,1520554884.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:25.095Z,1520554885.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:25.370Z,1520554885.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:25.774Z,1520554885.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:26.201Z,1520554886.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:26.592Z,1520554886.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:27.106Z,1520554887.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:27.374Z,1520554887.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:27.774Z,1520554887.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:28.205Z,1520554888.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:28.574Z,1520554888.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:28.973Z,1520554888.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:29.378Z,1520554889.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:29.776Z,1520554889.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:30.180Z,1520554890.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:30.583Z,1520554890.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:30.000Z,1520554891.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:31.517Z,1520554891.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:31.787Z,1520554891.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:32.176Z,1520554892.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:32.597Z,1520554892.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:32.997Z,1520554892.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:33.505Z,1520554893.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:33.786Z,1520554893.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:34.174Z,1520554894.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:34.614Z,1520554894.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:34.970Z,1520554894.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:35.374Z,1520554895.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:35.774Z,1520554895.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:36.173Z,1520554896.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:36.578Z,1520554896.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:36.974Z,1520554896.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:37.397Z,1520554897.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:37.922Z,1520554897.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:38.174Z,1520554898.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:38.577Z,1520554898.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:39.004Z,1520554899.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:39.385Z,1520554899.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:39.896Z,1520554899.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:40.174Z,1520554900.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:40.574Z,1520554900.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:41.009Z,1520554901.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:41.374Z,1520554901.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:41.774Z,1520554901.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:46.093Z,1520554906.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:46.426Z,1520554906.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:46.700Z,1520554906.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:47.076Z,1520554907.076 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.002140
2018-03-09T00:21:47.108Z,1520554907.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:47.750Z,1520554907.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:47.917Z,1520554907.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:48.294Z,1520554908.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:48.694Z,1520554908.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:52.102Z,1520554912.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:52.225Z,1520554912.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:52.562Z,1520554912.562 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180308T074127/Courier0400.lzma
2018-03-09T00:21:52.582Z,1520554912.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:52.974Z,1520554912.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:54.955Z,1520554914.955 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0400.lzma.bak
2018-03-09T00:21:54.956Z,1520554914.956 [DataOverHttps](INFO): SBD MOMSN=7990418
2018-03-09T00:21:54.978Z,1520554914.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:56.259Z,1520554916.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:56.382Z,1520554916.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:56.746Z,1520554916.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:21:59.881Z,1520554919.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:00.004Z,1520554920.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:00.387Z,1520554920.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:00.780Z,1520554920.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:01.226Z,1520554921.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:01.593Z,1520554921.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:01.994Z,1520554921.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:05.183Z,1520554925.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:05.315Z,1520554925.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:05.660Z,1520554925.660 [DataOverHttps](INFO): Sending 266 bytes from file Logs/20180308T074127/Express0401.lzma
2018-03-09T00:22:05.690Z,1520554925.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:06.085Z,1520554926.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:06.143Z,1520554926.143 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-09T00:22:06.459Z,1520554926.459 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0401.lzma.bak
2018-03-09T00:22:06.460Z,1520554926.460 [DataOverHttps](INFO): SBD MOMSN=7990423
2018-03-09T00:22:06.482Z,1520554926.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:07.128Z,1520554927.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:07.149Z,1520554927.149 [Default:CheckIn:Read_Iridium] Stopped
2018-03-09T00:22:07.149Z,1520554927.149 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-09T00:22:07.149Z,1520554927.149 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-09T00:22:07.278Z,1520554927.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:07.717Z,1520554927.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:10.936Z,1520554930.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:11.046Z,1520554931.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:11.447Z,1520554931.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:11.842Z,1520554931.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:12.248Z,1520554932.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:12.645Z,1520554932.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:13.042Z,1520554933.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:13.441Z,1520554933.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:13.856Z,1520554933.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:14.251Z,1520554934.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:14.646Z,1520554934.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:15.046Z,1520554935.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:15.443Z,1520554935.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:15.846Z,1520554935.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:16.246Z,1520554936.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:16.643Z,1520554936.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:17.047Z,1520554937.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:17.445Z,1520554937.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:17.825Z,1520554937.825 [NAL9602](INFO): Powering down
2018-03-09T00:22:17.864Z,1520554937.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:18.245Z,1520554938.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:18.645Z,1520554938.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:19.050Z,1520554939.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:19.434Z,1520554939.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:19.845Z,1520554939.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:20.249Z,1520554940.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:20.646Z,1520554940.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:21.046Z,1520554941.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:21.446Z,1520554941.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:21.857Z,1520554941.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:22.245Z,1520554942.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:22.635Z,1520554942.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:23.046Z,1520554943.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:23.445Z,1520554943.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:23.849Z,1520554943.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:24.249Z,1520554944.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:24.646Z,1520554944.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:25.049Z,1520554945.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:25.449Z,1520554945.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:25.846Z,1520554945.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:26.246Z,1520554946.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:26.650Z,1520554946.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:27.042Z,1520554947.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:27.435Z,1520554947.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:27.842Z,1520554947.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:28.237Z,1520554948.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:28.632Z,1520554948.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:29.038Z,1520554949.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:29.439Z,1520554949.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:29.854Z,1520554949.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:30.238Z,1520554950.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:30.638Z,1520554950.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:31.038Z,1520554951.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:31.442Z,1520554951.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:31.845Z,1520554951.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:32.238Z,1520554952.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:32.642Z,1520554952.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:33.042Z,1520554953.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:33.443Z,1520554953.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:33.843Z,1520554953.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:34.242Z,1520554954.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:34.645Z,1520554954.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:35.044Z,1520554955.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:35.446Z,1520554955.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:35.844Z,1520554955.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:36.247Z,1520554956.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:36.645Z,1520554956.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:37.042Z,1520554957.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:37.444Z,1520554957.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:37.846Z,1520554957.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:38.246Z,1520554958.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:38.644Z,1520554958.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:39.044Z,1520554959.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:39.442Z,1520554959.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:39.850Z,1520554959.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:40.247Z,1520554960.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:40.645Z,1520554960.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:41.044Z,1520554961.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:41.445Z,1520554961.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:41.845Z,1520554961.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:42.246Z,1520554962.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:42.645Z,1520554962.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:43.045Z,1520554963.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:43.446Z,1520554963.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:43.845Z,1520554963.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:44.245Z,1520554964.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:44.650Z,1520554964.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:45.050Z,1520554965.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:45.445Z,1520554965.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:45.850Z,1520554965.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:46.244Z,1520554966.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:46.646Z,1520554966.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:47.042Z,1520554967.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:47.444Z,1520554967.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:47.850Z,1520554967.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:48.238Z,1520554968.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:48.651Z,1520554968.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:49.038Z,1520554969.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:49.439Z,1520554969.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:49.846Z,1520554969.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:50.235Z,1520554970.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:50.636Z,1520554970.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:51.039Z,1520554971.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:51.442Z,1520554971.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:51.843Z,1520554971.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:52.246Z,1520554972.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:52.642Z,1520554972.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:53.046Z,1520554973.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:53.444Z,1520554973.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:53.845Z,1520554973.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:54.244Z,1520554974.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:54.647Z,1520554974.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:55.044Z,1520554975.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:55.442Z,1520554975.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:55.845Z,1520554975.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:56.245Z,1520554976.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:56.647Z,1520554976.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:57.045Z,1520554977.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:57.445Z,1520554977.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:57.845Z,1520554977.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:58.245Z,1520554978.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:58.646Z,1520554978.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:59.045Z,1520554979.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:59.441Z,1520554979.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:22:59.845Z,1520554979.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:00.245Z,1520554980.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:00.644Z,1520554980.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:01.049Z,1520554981.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:01.444Z,1520554981.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:01.855Z,1520554981.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:02.248Z,1520554982.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:02.645Z,1520554982.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:03.045Z,1520554983.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:03.446Z,1520554983.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:03.845Z,1520554983.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:04.246Z,1520554984.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:04.648Z,1520554984.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:05.048Z,1520554985.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:05.449Z,1520554985.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:05.848Z,1520554985.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:06.243Z,1520554986.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:06.640Z,1520554986.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:07.049Z,1520554987.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:07.441Z,1520554987.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:07.841Z,1520554987.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:11.160Z,1520554991.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:11.297Z,1520554991.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:11.695Z,1520554991.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:12.078Z,1520554992.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:12.467Z,1520554992.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:12.884Z,1520554992.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:13.262Z,1520554993.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:13.663Z,1520554993.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:14.066Z,1520554994.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:14.472Z,1520554994.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:14.866Z,1520554994.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:15.305Z,1520554995.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:15.670Z,1520554995.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:16.102Z,1520554996.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:16.492Z,1520554996.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:16.867Z,1520554996.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:17.285Z,1520554997.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:17.701Z,1520554997.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:18.097Z,1520554998.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:18.484Z,1520554998.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:18.902Z,1520554998.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:19.283Z,1520554999.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:19.680Z,1520554999.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:20.075Z,1520555000.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:20.478Z,1520555000.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:20.866Z,1520555000.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:21.273Z,1520555001.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:21.680Z,1520555001.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:22.063Z,1520555002.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:22.466Z,1520555002.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:22.866Z,1520555002.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:23.263Z,1520555003.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:23.689Z,1520555003.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:24.078Z,1520555004.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:24.467Z,1520555004.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:24.895Z,1520555004.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:25.302Z,1520555005.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:25.685Z,1520555005.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:26.101Z,1520555006.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:26.483Z,1520555006.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:26.878Z,1520555006.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:27.275Z,1520555007.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:27.689Z,1520555007.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:28.059Z,1520555008.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:28.483Z,1520555008.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:28.876Z,1520555008.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:29.262Z,1520555009.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:29.666Z,1520555009.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:30.066Z,1520555010.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:30.466Z,1520555010.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:30.906Z,1520555010.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:31.282Z,1520555011.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:31.663Z,1520555011.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:32.085Z,1520555012.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:32.479Z,1520555012.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:32.908Z,1520555012.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:32.927Z,1520555012.927 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T00:23:32.927Z,1520555012.927 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-09T00:23:32.927Z,1520555012.927 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T00:23:32.940Z,1520555012.940 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T00:23:33.295Z,1520555013.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:33.334Z,1520555013.334 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T00:23:33.334Z,1520555013.334 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-09T00:23:33.692Z,1520555013.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:33.725Z,1520555013.725 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T00:23:33.726Z,1520555013.726 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T00:23:33.726Z,1520555013.726 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T00:23:34.079Z,1520555014.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:34.484Z,1520555014.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:34.877Z,1520555014.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:35.279Z,1520555015.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:35.678Z,1520555015.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:36.073Z,1520555016.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:36.476Z,1520555016.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:36.875Z,1520555016.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:37.306Z,1520555017.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:37.671Z,1520555017.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:38.093Z,1520555018.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:38.466Z,1520555018.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:38.885Z,1520555018.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:39.266Z,1520555019.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:39.703Z,1520555019.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:40.063Z,1520555020.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:40.475Z,1520555020.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:40.887Z,1520555020.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:41.266Z,1520555021.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:41.682Z,1520555021.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:42.099Z,1520555022.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:42.485Z,1520555022.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:42.913Z,1520555022.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:43.288Z,1520555023.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:43.667Z,1520555023.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:44.068Z,1520555024.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:44.466Z,1520555024.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:44.866Z,1520555024.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:45.266Z,1520555025.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:45.717Z,1520555025.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:46.068Z,1520555026.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:46.479Z,1520555026.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:46.887Z,1520555026.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:47.268Z,1520555027.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:47.676Z,1520555027.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:48.108Z,1520555028.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:48.467Z,1520555028.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:48.893Z,1520555028.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:49.283Z,1520555029.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:49.685Z,1520555029.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:50.083Z,1520555030.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:50.484Z,1520555030.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:50.885Z,1520555030.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:51.284Z,1520555031.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:51.677Z,1520555031.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:52.079Z,1520555032.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:52.517Z,1520555032.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:52.870Z,1520555032.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:53.263Z,1520555033.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:53.665Z,1520555033.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:54.089Z,1520555034.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:54.494Z,1520555034.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:54.866Z,1520555034.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:55.266Z,1520555035.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:55.663Z,1520555035.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:56.116Z,1520555036.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:56.480Z,1520555036.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:56.883Z,1520555036.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:57.278Z,1520555037.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:57.679Z,1520555037.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:58.067Z,1520555038.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:58.473Z,1520555038.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:58.872Z,1520555038.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:59.266Z,1520555039.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:23:59.666Z,1520555039.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:00.072Z,1520555040.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:00.516Z,1520555040.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:00.893Z,1520555040.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:01.277Z,1520555041.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:01.689Z,1520555041.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:02.103Z,1520555042.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:02.502Z,1520555042.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:02.887Z,1520555042.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:03.295Z,1520555043.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:03.687Z,1520555043.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:04.063Z,1520555044.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:04.481Z,1520555044.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:04.887Z,1520555044.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:05.263Z,1520555045.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:05.673Z,1520555045.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:06.072Z,1520555046.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:06.463Z,1520555046.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:06.921Z,1520555046.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:07.270Z,1520555047.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:07.665Z,1520555047.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:08.081Z,1520555048.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:11.300Z,1520555051.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:11.416Z,1520555051.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:11.775Z,1520555051.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:12.173Z,1520555052.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:12.573Z,1520555052.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:12.975Z,1520555052.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:13.372Z,1520555053.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:13.771Z,1520555053.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:14.173Z,1520555054.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:14.576Z,1520555054.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:14.975Z,1520555054.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:15.382Z,1520555055.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:15.778Z,1520555055.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:16.173Z,1520555056.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:16.583Z,1520555056.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:16.995Z,1520555056.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:17.359Z,1520555057.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:17.777Z,1520555057.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:18.166Z,1520555058.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:18.563Z,1520555058.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:18.969Z,1520555058.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:19.367Z,1520555059.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:19.759Z,1520555059.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:20.165Z,1520555060.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:20.567Z,1520555060.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:20.978Z,1520555060.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:21.385Z,1520555061.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:21.766Z,1520555061.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:22.166Z,1520555062.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:22.566Z,1520555062.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:22.966Z,1520555062.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:23.362Z,1520555063.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:23.766Z,1520555063.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:24.166Z,1520555064.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:24.562Z,1520555064.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:24.965Z,1520555064.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:25.374Z,1520555065.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:25.766Z,1520555065.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:26.170Z,1520555066.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:26.572Z,1520555066.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:26.972Z,1520555066.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:27.373Z,1520555067.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:27.782Z,1520555067.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:28.167Z,1520555068.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:28.579Z,1520555068.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:28.983Z,1520555068.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:29.377Z,1520555069.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:29.773Z,1520555069.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:30.173Z,1520555070.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:30.573Z,1520555070.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:30.976Z,1520555070.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:31.379Z,1520555071.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:31.773Z,1520555071.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:32.173Z,1520555072.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:32.578Z,1520555072.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:32.973Z,1520555072.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:33.373Z,1520555073.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:33.772Z,1520555073.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:34.179Z,1520555074.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:34.587Z,1520555074.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:34.979Z,1520555074.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:35.374Z,1520555075.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:35.776Z,1520555075.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:36.163Z,1520555076.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:36.574Z,1520555076.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:36.989Z,1520555076.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:37.365Z,1520555077.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:37.771Z,1520555077.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:38.167Z,1520555078.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:38.564Z,1520555078.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:38.971Z,1520555078.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:39.366Z,1520555079.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:39.763Z,1520555079.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:40.162Z,1520555080.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:40.565Z,1520555080.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:40.967Z,1520555080.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:41.366Z,1520555081.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:41.779Z,1520555081.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:42.166Z,1520555082.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:42.571Z,1520555082.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:42.970Z,1520555082.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:43.372Z,1520555083.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:43.775Z,1520555083.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:44.173Z,1520555084.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:44.567Z,1520555084.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:44.973Z,1520555084.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:45.373Z,1520555085.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:45.770Z,1520555085.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:46.173Z,1520555086.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:46.574Z,1520555086.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:46.976Z,1520555086.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:47.373Z,1520555087.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:47.773Z,1520555087.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:48.174Z,1520555088.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:48.577Z,1520555088.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:48.979Z,1520555088.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:49.374Z,1520555089.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:49.773Z,1520555089.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:50.173Z,1520555090.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:50.569Z,1520555090.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:50.974Z,1520555090.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:51.374Z,1520555091.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:51.771Z,1520555091.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:52.173Z,1520555092.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:52.573Z,1520555092.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:52.976Z,1520555092.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:53.377Z,1520555093.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:53.773Z,1520555093.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:54.171Z,1520555094.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:54.576Z,1520555094.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:54.979Z,1520555094.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:55.370Z,1520555095.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:55.774Z,1520555095.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:56.179Z,1520555096.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:56.570Z,1520555096.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:56.973Z,1520555096.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:57.373Z,1520555097.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:57.770Z,1520555097.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:58.174Z,1520555098.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:58.573Z,1520555098.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:58.971Z,1520555098.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:59.373Z,1520555099.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:24:59.774Z,1520555099.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:00.171Z,1520555100.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:00.577Z,1520555100.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:00.972Z,1520555100.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:01.369Z,1520555101.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:01.783Z,1520555101.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:02.169Z,1520555102.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:02.573Z,1520555102.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:02.985Z,1520555102.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:03.369Z,1520555103.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:03.773Z,1520555103.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:04.173Z,1520555104.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:04.578Z,1520555104.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:04.975Z,1520555104.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:05.369Z,1520555105.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:05.778Z,1520555105.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:06.163Z,1520555106.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:06.566Z,1520555106.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:06.966Z,1520555106.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:07.363Z,1520555107.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:07.769Z,1520555107.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:08.174Z,1520555108.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:11.459Z,1520555111.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:11.575Z,1520555111.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:11.938Z,1520555111.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:12.334Z,1520555112.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:12.738Z,1520555112.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:13.136Z,1520555113.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:13.525Z,1520555113.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:13.926Z,1520555113.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:14.330Z,1520555114.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:14.723Z,1520555114.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:15.130Z,1520555115.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:15.546Z,1520555115.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:15.930Z,1520555115.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:16.327Z,1520555116.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:16.745Z,1520555116.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:17.123Z,1520555117.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:17.526Z,1520555117.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:17.926Z,1520555117.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:18.330Z,1520555118.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:18.726Z,1520555118.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:19.142Z,1520555119.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:19.523Z,1520555119.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:19.930Z,1520555119.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:20.330Z,1520555120.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:20.723Z,1520555120.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:21.130Z,1520555121.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:21.529Z,1520555121.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:21.928Z,1520555121.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:22.346Z,1520555122.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:22.726Z,1520555122.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:23.125Z,1520555123.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:23.526Z,1520555123.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:23.950Z,1520555123.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:24.321Z,1520555124.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:24.726Z,1520555124.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:25.126Z,1520555125.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:25.525Z,1520555125.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:25.930Z,1520555125.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:26.326Z,1520555126.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:26.726Z,1520555126.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:27.142Z,1520555127.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:27.526Z,1520555127.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:27.922Z,1520555127.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:28.330Z,1520555128.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:28.727Z,1520555128.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:29.125Z,1520555129.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:29.527Z,1520555129.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:29.926Z,1520555129.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:30.329Z,1520555130.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:30.723Z,1520555130.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:31.143Z,1520555131.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:31.527Z,1520555131.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:31.943Z,1520555131.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:32.332Z,1520555132.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:32.730Z,1520555132.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:33.126Z,1520555133.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:33.547Z,1520555133.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:33.933Z,1520555133.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:34.326Z,1520555134.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:34.737Z,1520555134.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:35.122Z,1520555135.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:35.522Z,1520555135.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:35.946Z,1520555135.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:36.329Z,1520555136.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:36.726Z,1520555136.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:37.126Z,1520555137.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:37.526Z,1520555137.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:37.926Z,1520555137.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:38.326Z,1520555138.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:38.722Z,1520555138.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:39.122Z,1520555139.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:39.530Z,1520555139.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:39.921Z,1520555139.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:40.331Z,1520555140.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:40.726Z,1520555140.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:41.128Z,1520555141.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:41.531Z,1520555141.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:41.937Z,1520555141.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:42.332Z,1520555142.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:42.741Z,1520555142.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:43.129Z,1520555143.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:43.530Z,1520555143.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:43.941Z,1520555143.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:44.347Z,1520555144.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:44.745Z,1520555144.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:45.131Z,1520555145.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:45.537Z,1520555145.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:45.926Z,1520555145.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:46.329Z,1520555146.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:46.729Z,1520555146.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:47.122Z,1520555147.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:47.522Z,1520555147.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:47.939Z,1520555147.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:48.326Z,1520555148.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:48.723Z,1520555148.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:49.126Z,1520555149.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:49.531Z,1520555149.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:49.934Z,1520555149.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:50.342Z,1520555150.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:50.735Z,1520555150.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:51.125Z,1520555151.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:51.543Z,1520555151.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:51.930Z,1520555151.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:52.337Z,1520555152.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:52.744Z,1520555152.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:53.137Z,1520555153.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:53.522Z,1520555153.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:53.938Z,1520555153.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:54.337Z,1520555154.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:54.723Z,1520555154.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:55.126Z,1520555155.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:55.526Z,1520555155.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:55.923Z,1520555155.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:56.346Z,1520555156.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:56.722Z,1520555156.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:57.126Z,1520555157.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:57.539Z,1520555157.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:57.921Z,1520555157.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:58.322Z,1520555158.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:58.726Z,1520555158.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:59.133Z,1520555159.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:59.527Z,1520555159.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:25:59.934Z,1520555159.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:00.337Z,1520555160.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:00.731Z,1520555160.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:01.132Z,1520555161.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:01.530Z,1520555161.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:01.930Z,1520555161.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:02.329Z,1520555162.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:02.722Z,1520555162.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:03.135Z,1520555163.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:03.529Z,1520555163.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:03.934Z,1520555163.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:04.334Z,1520555164.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:04.745Z,1520555164.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:05.146Z,1520555165.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:05.526Z,1520555165.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:05.926Z,1520555165.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:06.326Z,1520555166.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:06.724Z,1520555166.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:07.127Z,1520555167.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:07.531Z,1520555167.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:07.934Z,1520555167.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:08.334Z,1520555168.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:11.597Z,1520555171.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:11.750Z,1520555171.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:12.114Z,1520555172.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:12.483Z,1520555172.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:12.899Z,1520555172.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:13.305Z,1520555173.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:13.692Z,1520555173.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:14.091Z,1520555174.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:14.481Z,1520555174.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:14.886Z,1520555174.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:15.284Z,1520555175.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:15.686Z,1520555175.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:16.089Z,1520555176.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:16.488Z,1520555176.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:16.908Z,1520555176.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:17.273Z,1520555177.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:17.712Z,1520555177.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:18.092Z,1520555178.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:18.488Z,1520555178.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:18.888Z,1520555178.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:19.299Z,1520555179.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:19.705Z,1520555179.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:20.091Z,1520555180.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:20.493Z,1520555180.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:20.900Z,1520555180.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:21.282Z,1520555181.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:21.698Z,1520555181.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:22.082Z,1520555182.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:22.496Z,1520555182.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:22.894Z,1520555182.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:23.278Z,1520555183.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:23.674Z,1520555183.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:24.075Z,1520555184.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:24.510Z,1520555184.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:24.879Z,1520555184.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:25.314Z,1520555185.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:25.719Z,1520555185.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:26.095Z,1520555186.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:26.512Z,1520555186.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:26.909Z,1520555186.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:27.279Z,1520555187.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:27.698Z,1520555187.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:28.101Z,1520555188.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:28.491Z,1520555188.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:28.895Z,1520555188.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:29.285Z,1520555189.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:29.692Z,1520555189.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:30.094Z,1520555190.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:30.489Z,1520555190.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:30.889Z,1520555190.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:31.287Z,1520555191.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:31.708Z,1520555191.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:32.072Z,1520555192.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:32.505Z,1520555192.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:32.914Z,1520555192.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:33.276Z,1520555193.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:33.704Z,1520555193.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:34.105Z,1520555194.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:34.125Z,1520555194.125 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T00:26:34.125Z,1520555194.125 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-03-09T00:26:34.125Z,1520555194.125 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T00:26:34.162Z,1520555194.162 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T00:26:34.509Z,1520555194.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:34.552Z,1520555194.552 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T00:26:34.552Z,1520555194.552 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-03-09T00:26:34.892Z,1520555194.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:34.920Z,1520555194.920 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T00:26:34.920Z,1520555194.920 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T00:26:34.921Z,1520555194.921 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T00:26:35.303Z,1520555195.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:35.685Z,1520555195.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:36.103Z,1520555196.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:36.485Z,1520555196.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:36.890Z,1520555196.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:37.287Z,1520555197.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:37.689Z,1520555197.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:38.084Z,1520555198.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:38.480Z,1520555198.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:38.922Z,1520555198.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:39.276Z,1520555199.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:39.719Z,1520555199.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:40.119Z,1520555200.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:40.495Z,1520555200.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:40.918Z,1520555200.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:41.320Z,1520555201.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:41.691Z,1520555201.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:42.113Z,1520555202.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:42.496Z,1520555202.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:42.895Z,1520555202.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:43.286Z,1520555203.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:43.694Z,1520555203.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:44.094Z,1520555204.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:44.486Z,1520555204.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:44.890Z,1520555204.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:45.282Z,1520555205.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:45.713Z,1520555205.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:46.083Z,1520555206.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:46.501Z,1520555206.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:46.881Z,1520555206.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:47.300Z,1520555207.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:47.698Z,1520555207.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:48.116Z,1520555208.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:48.505Z,1520555208.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:48.876Z,1520555208.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:49.287Z,1520555209.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:49.713Z,1520555209.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:50.087Z,1520555210.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:50.487Z,1520555210.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:50.881Z,1520555210.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:51.284Z,1520555211.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:51.694Z,1520555211.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:52.084Z,1520555212.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:52.488Z,1520555212.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:52.888Z,1520555212.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:53.316Z,1520555213.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:53.676Z,1520555213.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:54.124Z,1520555214.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:54.508Z,1520555214.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:54.886Z,1520555214.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:55.299Z,1520555215.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:55.714Z,1520555215.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:56.121Z,1520555216.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:56.492Z,1520555216.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:56.915Z,1520555216.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:57.288Z,1520555217.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:57.694Z,1520555217.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:58.090Z,1520555218.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:58.487Z,1520555218.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:58.898Z,1520555218.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:59.283Z,1520555219.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:26:59.689Z,1520555219.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:00.090Z,1520555220.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:00.541Z,1520555220.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:00.875Z,1520555220.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:01.309Z,1520555221.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:01.700Z,1520555221.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:02.083Z,1520555222.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:02.502Z,1520555222.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:02.915Z,1520555222.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:03.309Z,1520555223.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:03.704Z,1520555223.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:04.105Z,1520555224.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:04.483Z,1520555224.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:04.887Z,1520555224.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:05.274Z,1520555225.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:05.682Z,1520555225.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:06.086Z,1520555226.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:06.489Z,1520555226.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:06.881Z,1520555226.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:07.287Z,1520555227.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:07.335Z,1520555227.335 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-09T00:27:07.335Z,1520555227.335 [Default:CheckIn:C.Wait] Stopped
2018-03-09T00:27:07.335Z,1520555227.335 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-09T00:27:07.335Z,1520555227.335 [Default:CheckIn:D] Running Loop=1
2018-03-09T00:27:07.711Z,1520555227.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:07.762Z,1520555227.762 [Default:CheckIn:D] Stopped
2018-03-09T00:27:07.762Z,1520555227.762 [Default:CheckIn:E] Running Loop=1
2018-03-09T00:27:08.090Z,1520555228.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:08.110Z,1520555228.110 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1001.382617 min 
2018-03-09T00:27:08.110Z,1520555228.110 [Default:CheckIn:E] Stopped
2018-03-09T00:27:08.110Z,1520555228.110 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-09T00:27:08.110Z,1520555228.110 [Default:CheckIn] Stopped
2018-03-09T00:27:08.111Z,1520555228.111 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-09T00:27:08.111Z,1520555228.111 [Default:CheckIn](INFO): Running loop #101
2018-03-09T00:27:08.111Z,1520555228.111 [Default:CheckIn] Running Loop=101
2018-03-09T00:27:08.111Z,1520555228.111 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-09T00:27:08.111Z,1520555228.111 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-09T00:27:08.530Z,1520555228.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:11.724Z,1520555231.724 [NAL9602](INFO): Powering up
2018-03-09T00:27:11.741Z,1520555231.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:11.868Z,1520555231.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:12.256Z,1520555232.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:12.649Z,1520555232.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:13.051Z,1520555233.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:13.453Z,1520555233.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:13.856Z,1520555233.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:14.250Z,1520555234.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:14.663Z,1520555234.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:15.058Z,1520555235.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:15.453Z,1520555235.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:15.863Z,1520555235.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:16.257Z,1520555236.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:16.289Z,1520555236.289 [CBIT](INFO): Clearing failed state for component DropWeight
2018-03-09T00:27:16.289Z,1520555236.289 [DropWeight] No Fault, FailCount= 1
2018-03-09T00:27:16.655Z,1520555236.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:17.066Z,1520555237.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:17.443Z,1520555237.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:17.842Z,1520555237.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:18.242Z,1520555238.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:18.643Z,1520555238.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:19.046Z,1520555239.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:19.451Z,1520555239.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:19.851Z,1520555239.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:20.255Z,1520555240.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:20.653Z,1520555240.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:21.050Z,1520555241.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:21.454Z,1520555241.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:21.855Z,1520555241.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:22.257Z,1520555242.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:22.630Z,1520555242.630 [NAL9602](INFO): NAL9602 initialized
2018-03-09T00:27:22.656Z,1520555242.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:23.055Z,1520555243.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:23.461Z,1520555243.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:23.862Z,1520555243.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:24.264Z,1520555244.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:24.660Z,1520555244.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:25.058Z,1520555245.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:25.458Z,1520555245.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:25.851Z,1520555245.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:26.264Z,1520555246.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:26.659Z,1520555246.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:27.042Z,1520555247.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:27.443Z,1520555247.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:27.850Z,1520555247.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:28.246Z,1520555248.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:28.651Z,1520555248.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:29.066Z,1520555249.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:29.442Z,1520555249.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:29.850Z,1520555249.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:30.246Z,1520555250.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:30.646Z,1520555250.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:31.051Z,1520555251.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:31.446Z,1520555251.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:31.842Z,1520555251.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:32.247Z,1520555252.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:32.664Z,1520555252.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:33.062Z,1520555253.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:33.451Z,1520555253.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:33.847Z,1520555253.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:34.246Z,1520555254.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:34.650Z,1520555254.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:35.066Z,1520555255.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:35.442Z,1520555255.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:35.846Z,1520555255.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:36.246Z,1520555256.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:36.643Z,1520555256.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:37.074Z,1520555257.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:37.477Z,1520555257.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:37.842Z,1520555257.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:38.250Z,1520555258.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:38.647Z,1520555258.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:39.050Z,1520555259.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:39.450Z,1520555259.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:39.850Z,1520555259.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:40.247Z,1520555260.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:40.651Z,1520555260.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:41.065Z,1520555261.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:41.460Z,1520555261.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:41.862Z,1520555261.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:42.259Z,1520555262.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:42.655Z,1520555262.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:43.091Z,1520555263.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:43.480Z,1520555263.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:43.853Z,1520555263.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:44.254Z,1520555264.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:44.648Z,1520555264.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:45.055Z,1520555265.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:45.456Z,1520555265.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:45.858Z,1520555265.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:46.255Z,1520555266.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:46.667Z,1520555266.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:47.066Z,1520555267.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:47.446Z,1520555267.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:47.878Z,1520555267.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:48.250Z,1520555268.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:48.646Z,1520555268.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:49.046Z,1520555269.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:49.446Z,1520555269.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:49.880Z,1520555269.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:50.274Z,1520555270.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:50.651Z,1520555270.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:51.047Z,1520555271.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:51.445Z,1520555271.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:51.857Z,1520555271.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:52.253Z,1520555272.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:52.650Z,1520555272.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:53.056Z,1520555273.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:53.456Z,1520555273.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:53.846Z,1520555273.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:54.260Z,1520555274.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:54.662Z,1520555274.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:55.045Z,1520555275.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:55.446Z,1520555275.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:55.842Z,1520555275.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:56.246Z,1520555276.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:56.666Z,1520555276.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:57.046Z,1520555277.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:57.441Z,1520555277.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:57.846Z,1520555277.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:58.246Z,1520555278.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:58.664Z,1520555278.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:59.069Z,1520555279.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:59.446Z,1520555279.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:27:59.846Z,1520555279.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:00.245Z,1520555280.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:00.650Z,1520555280.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:01.051Z,1520555281.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:01.446Z,1520555281.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:01.846Z,1520555281.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:02.267Z,1520555282.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:02.646Z,1520555282.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:03.068Z,1520555283.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:03.444Z,1520555283.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:03.850Z,1520555283.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:04.247Z,1520555284.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:04.644Z,1520555284.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:05.046Z,1520555285.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:05.451Z,1520555285.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:05.854Z,1520555285.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:06.251Z,1520555286.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:06.646Z,1520555286.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:07.065Z,1520555287.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:07.469Z,1520555287.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:07.858Z,1520555287.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:08.258Z,1520555288.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:08.654Z,1520555288.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:12.161Z,1520555292.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:12.285Z,1520555292.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:12.655Z,1520555292.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:13.042Z,1520555293.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:13.454Z,1520555293.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:13.846Z,1520555293.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:14.246Z,1520555294.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:14.680Z,1520555294.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:15.046Z,1520555295.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:15.450Z,1520555295.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:15.852Z,1520555295.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:16.254Z,1520555296.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:16.654Z,1520555296.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:17.052Z,1520555297.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:17.458Z,1520555297.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:17.856Z,1520555297.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:18.287Z,1520555298.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:18.649Z,1520555298.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:19.050Z,1520555299.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:19.455Z,1520555299.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:19.864Z,1520555299.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:20.269Z,1520555300.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:20.654Z,1520555300.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:21.052Z,1520555301.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:21.455Z,1520555301.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:21.855Z,1520555301.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:22.254Z,1520555302.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:22.656Z,1520555302.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:23.058Z,1520555303.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:23.454Z,1520555303.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:23.855Z,1520555303.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:24.258Z,1520555304.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:24.664Z,1520555304.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:25.056Z,1520555305.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:25.459Z,1520555305.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:25.866Z,1520555305.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:26.259Z,1520555306.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:26.658Z,1520555306.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:27.046Z,1520555307.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:27.447Z,1520555307.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:27.859Z,1520555307.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:28.247Z,1520555308.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:28.672Z,1520555308.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:29.054Z,1520555309.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:29.447Z,1520555309.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:29.848Z,1520555309.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:30.247Z,1520555310.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:30.646Z,1520555310.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:31.052Z,1520555311.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:31.450Z,1520555311.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:31.846Z,1520555311.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:32.251Z,1520555312.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:32.651Z,1520555312.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:33.052Z,1520555313.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:33.459Z,1520555313.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:33.854Z,1520555313.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:34.253Z,1520555314.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:34.655Z,1520555314.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:35.049Z,1520555315.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:35.449Z,1520555315.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:35.859Z,1520555315.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:36.254Z,1520555316.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:36.654Z,1520555316.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:37.055Z,1520555317.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:37.464Z,1520555317.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:37.864Z,1520555317.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:38.256Z,1520555318.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:38.653Z,1520555318.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:39.067Z,1520555319.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:39.446Z,1520555319.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:39.842Z,1520555319.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:40.246Z,1520555320.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:40.646Z,1520555320.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:41.042Z,1520555321.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:41.450Z,1520555321.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:41.846Z,1520555321.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:42.244Z,1520555322.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:42.650Z,1520555322.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:43.046Z,1520555323.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:43.444Z,1520555323.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:43.847Z,1520555323.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:44.246Z,1520555324.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:44.644Z,1520555324.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:45.046Z,1520555325.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:45.451Z,1520555325.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:45.866Z,1520555325.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:46.265Z,1520555326.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:46.651Z,1520555326.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:47.047Z,1520555327.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:47.455Z,1520555327.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:47.854Z,1520555327.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:48.254Z,1520555328.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:48.656Z,1520555328.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:49.054Z,1520555329.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:49.452Z,1520555329.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:49.854Z,1520555329.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:50.261Z,1520555330.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:50.661Z,1520555330.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:51.064Z,1520555331.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:51.455Z,1520555331.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:51.854Z,1520555331.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:52.254Z,1520555332.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:52.655Z,1520555332.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:53.054Z,1520555333.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:53.453Z,1520555333.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:53.855Z,1520555333.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:54.255Z,1520555334.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:54.665Z,1520555334.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:55.064Z,1520555335.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:55.466Z,1520555335.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:55.864Z,1520555335.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:56.242Z,1520555336.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:56.665Z,1520555336.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:57.066Z,1520555337.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:57.446Z,1520555337.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:57.842Z,1520555337.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:58.262Z,1520555338.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:58.667Z,1520555338.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:59.042Z,1520555339.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:59.446Z,1520555339.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:28:59.870Z,1520555339.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:00.270Z,1520555340.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:00.650Z,1520555340.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:01.047Z,1520555341.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:01.442Z,1520555341.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:01.846Z,1520555341.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:02.246Z,1520555342.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:02.644Z,1520555342.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:03.074Z,1520555343.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:03.466Z,1520555343.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:03.869Z,1520555343.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:04.266Z,1520555344.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:04.646Z,1520555344.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:05.044Z,1520555345.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:05.454Z,1520555345.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:05.846Z,1520555345.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:06.252Z,1520555346.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:06.648Z,1520555346.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:07.047Z,1520555347.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:07.448Z,1520555347.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:07.862Z,1520555347.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:08.258Z,1520555348.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:08.645Z,1520555348.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:09.051Z,1520555349.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:12.357Z,1520555352.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:12.504Z,1520555352.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:12.858Z,1520555352.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:13.252Z,1520555353.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:13.655Z,1520555353.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:14.054Z,1520555354.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:14.455Z,1520555354.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:14.854Z,1520555354.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:15.254Z,1520555355.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:15.660Z,1520555355.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:16.058Z,1520555356.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:16.449Z,1520555356.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:16.859Z,1520555356.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:17.244Z,1520555357.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:17.646Z,1520555357.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:18.050Z,1520555358.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:18.447Z,1520555358.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:18.854Z,1520555358.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:19.251Z,1520555359.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:19.648Z,1520555359.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:20.051Z,1520555360.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:20.467Z,1520555360.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:20.865Z,1520555360.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:21.249Z,1520555361.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:21.659Z,1520555361.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:22.079Z,1520555362.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:22.477Z,1520555362.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:22.846Z,1520555362.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:23.245Z,1520555363.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:23.646Z,1520555363.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:24.050Z,1520555364.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:24.450Z,1520555364.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:24.847Z,1520555364.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:25.252Z,1520555365.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:25.648Z,1520555365.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:26.059Z,1520555366.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:26.465Z,1520555366.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:26.866Z,1520555366.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:27.252Z,1520555367.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:27.654Z,1520555367.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:28.054Z,1520555368.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:28.454Z,1520555368.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:28.854Z,1520555368.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:29.249Z,1520555369.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:29.658Z,1520555369.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:30.053Z,1520555370.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:30.446Z,1520555370.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:30.860Z,1520555370.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:31.278Z,1520555371.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:31.665Z,1520555371.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:32.061Z,1520555372.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:32.446Z,1520555372.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:32.851Z,1520555372.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:33.262Z,1520555373.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:33.658Z,1520555373.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:34.050Z,1520555374.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:34.455Z,1520555374.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:34.856Z,1520555374.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:35.249Z,1520555375.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:35.296Z,1520555375.296 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T00:29:35.300Z,1520555375.300 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-03-09T00:29:35.301Z,1520555375.301 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T00:29:35.329Z,1520555375.329 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T00:29:35.660Z,1520555375.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:35.721Z,1520555375.721 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T00:29:35.721Z,1520555375.721 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-03-09T00:29:36.062Z,1520555376.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:36.115Z,1520555376.115 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T00:29:36.116Z,1520555376.116 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T00:29:36.116Z,1520555376.116 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T00:29:36.461Z,1520555376.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:36.861Z,1520555376.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:37.248Z,1520555377.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:37.641Z,1520555377.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:38.050Z,1520555378.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:38.448Z,1520555378.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:38.846Z,1520555378.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:39.248Z,1520555379.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:39.665Z,1520555379.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:40.040Z,1520555380.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:40.461Z,1520555380.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:40.857Z,1520555380.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:41.253Z,1520555381.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:41.658Z,1520555381.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:42.047Z,1520555382.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:42.443Z,1520555382.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:42.848Z,1520555382.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:43.260Z,1520555383.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:43.643Z,1520555383.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:44.056Z,1520555384.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:44.466Z,1520555384.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:44.854Z,1520555384.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:45.262Z,1520555385.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:45.666Z,1520555385.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:46.067Z,1520555386.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:46.458Z,1520555386.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:46.876Z,1520555386.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:47.240Z,1520555387.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:47.660Z,1520555387.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:48.085Z,1520555388.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:48.466Z,1520555388.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:48.866Z,1520555388.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:49.287Z,1520555389.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:49.644Z,1520555389.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:50.046Z,1520555390.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:50.454Z,1520555390.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:50.851Z,1520555390.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:51.260Z,1520555391.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:51.655Z,1520555391.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:52.049Z,1520555392.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:52.454Z,1520555392.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:52.865Z,1520555392.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:53.265Z,1520555393.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:53.671Z,1520555393.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:54.072Z,1520555394.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:54.446Z,1520555394.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:54.846Z,1520555394.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:55.246Z,1520555395.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:55.652Z,1520555395.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:56.054Z,1520555396.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:56.451Z,1520555396.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:56.859Z,1520555396.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:57.264Z,1520555397.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:57.656Z,1520555397.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:58.059Z,1520555398.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:58.480Z,1520555398.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:58.883Z,1520555398.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:59.273Z,1520555399.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:29:59.654Z,1520555399.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:00.093Z,1520555400.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:00.455Z,1520555400.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:00.854Z,1520555400.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:01.254Z,1520555401.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:01.648Z,1520555401.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:02.068Z,1520555402.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:02.458Z,1520555402.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:02.847Z,1520555402.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:03.261Z,1520555403.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:03.662Z,1520555403.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:04.064Z,1520555404.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:04.465Z,1520555404.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:04.855Z,1520555404.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:05.255Z,1520555405.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:05.652Z,1520555405.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:06.051Z,1520555406.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:06.459Z,1520555406.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:06.855Z,1520555406.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:07.242Z,1520555407.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:07.659Z,1520555407.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:08.046Z,1520555408.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:08.467Z,1520555408.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:08.857Z,1520555408.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:09.285Z,1520555409.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:12.575Z,1520555412.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:12.685Z,1520555412.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:13.050Z,1520555413.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:13.461Z,1520555413.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:13.857Z,1520555413.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:14.258Z,1520555414.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:14.657Z,1520555414.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:15.043Z,1520555415.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:15.450Z,1520555415.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:15.846Z,1520555415.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:16.248Z,1520555416.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:16.649Z,1520555416.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:17.050Z,1520555417.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:17.448Z,1520555417.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:17.846Z,1520555417.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:18.245Z,1520555418.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:18.650Z,1520555418.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:19.056Z,1520555419.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:19.450Z,1520555419.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:19.863Z,1520555419.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:20.238Z,1520555420.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:20.634Z,1520555420.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:21.050Z,1520555421.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:21.451Z,1520555421.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:21.838Z,1520555421.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:22.247Z,1520555422.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:22.645Z,1520555422.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:23.047Z,1520555423.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:23.437Z,1520555423.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:23.856Z,1520555423.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:24.257Z,1520555424.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:24.677Z,1520555424.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:25.057Z,1520555425.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:25.434Z,1520555425.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:25.838Z,1520555425.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:26.238Z,1520555426.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:26.638Z,1520555426.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:27.049Z,1520555427.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:27.445Z,1520555427.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:27.842Z,1520555427.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:28.242Z,1520555428.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:28.639Z,1520555428.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:29.061Z,1520555429.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:29.461Z,1520555429.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:29.848Z,1520555429.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:30.258Z,1520555430.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:30.643Z,1520555430.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:31.059Z,1520555431.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:31.438Z,1520555431.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:31.842Z,1520555431.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:32.238Z,1520555432.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:32.634Z,1520555432.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:33.037Z,1520555433.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:33.446Z,1520555433.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:33.838Z,1520555433.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:34.249Z,1520555434.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:34.653Z,1520555434.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:35.053Z,1520555435.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:35.454Z,1520555435.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:35.846Z,1520555435.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:36.238Z,1520555436.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:36.646Z,1520555436.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:37.054Z,1520555437.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:37.446Z,1520555437.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:37.854Z,1520555437.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:38.247Z,1520555438.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:38.643Z,1520555438.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:39.046Z,1520555439.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:39.470Z,1520555439.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:39.852Z,1520555439.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:40.253Z,1520555440.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:40.652Z,1520555440.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:41.047Z,1520555441.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:41.445Z,1520555441.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:41.846Z,1520555441.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:42.248Z,1520555442.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:42.645Z,1520555442.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:43.051Z,1520555443.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:43.443Z,1520555443.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:43.855Z,1520555443.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:44.246Z,1520555444.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:44.657Z,1520555444.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:45.056Z,1520555445.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:45.457Z,1520555445.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:45.858Z,1520555445.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:46.238Z,1520555446.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:46.642Z,1520555446.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:47.039Z,1520555447.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:47.442Z,1520555447.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:47.838Z,1520555447.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:48.238Z,1520555448.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:48.642Z,1520555448.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:49.037Z,1520555449.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:49.442Z,1520555449.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:49.862Z,1520555449.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:50.257Z,1520555450.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:50.662Z,1520555450.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:51.057Z,1520555451.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:51.438Z,1520555451.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:51.842Z,1520555451.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:52.242Z,1520555452.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:52.638Z,1520555452.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:53.038Z,1520555453.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:53.438Z,1520555453.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:53.839Z,1520555453.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:54.242Z,1520555454.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:54.639Z,1520555454.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:55.067Z,1520555455.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:55.453Z,1520555455.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:55.867Z,1520555455.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:56.250Z,1520555456.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:56.644Z,1520555456.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:57.043Z,1520555457.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:57.438Z,1520555457.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:57.842Z,1520555457.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:58.247Z,1520555458.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:58.648Z,1520555458.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:59.047Z,1520555459.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:59.443Z,1520555459.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:30:59.846Z,1520555459.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:00.253Z,1520555460.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:00.657Z,1520555460.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:01.097Z,1520555461.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:01.449Z,1520555461.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:01.834Z,1520555461.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:02.239Z,1520555462.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:02.642Z,1520555462.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:03.046Z,1520555463.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:03.444Z,1520555463.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:03.845Z,1520555463.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:04.247Z,1520555464.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:04.644Z,1520555464.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:05.047Z,1520555465.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:05.452Z,1520555465.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:05.857Z,1520555465.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:06.261Z,1520555466.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:06.655Z,1520555466.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:07.041Z,1520555467.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:07.448Z,1520555467.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:07.851Z,1520555467.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:08.248Z,1520555468.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:08.647Z,1520555468.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:09.050Z,1520555469.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:09.441Z,1520555469.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:12.725Z,1520555472.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:12.861Z,1520555472.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:13.237Z,1520555473.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:13.641Z,1520555473.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:14.029Z,1520555474.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:14.424Z,1520555474.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:14.825Z,1520555474.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:15.223Z,1520555475.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:15.631Z,1520555475.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:16.018Z,1520555476.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:16.419Z,1520555476.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:16.836Z,1520555476.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:17.218Z,1520555477.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:17.637Z,1520555477.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:18.037Z,1520555478.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:18.442Z,1520555478.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:18.830Z,1520555478.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:19.226Z,1520555479.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:19.624Z,1520555479.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:20.028Z,1520555480.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:20.427Z,1520555480.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:20.827Z,1520555480.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:21.227Z,1520555481.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:21.628Z,1520555481.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:22.026Z,1520555482.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:22.426Z,1520555482.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:22.829Z,1520555482.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:23.232Z,1520555483.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:23.637Z,1520555483.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:24.040Z,1520555484.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:24.418Z,1520555484.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:24.816Z,1520555484.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:25.218Z,1520555485.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:25.623Z,1520555485.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:26.019Z,1520555486.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:26.424Z,1520555486.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:26.827Z,1520555486.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:27.223Z,1520555487.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:27.631Z,1520555487.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:28.037Z,1520555488.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:28.441Z,1520555488.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:28.849Z,1520555488.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:29.237Z,1520555489.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:29.615Z,1520555489.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:30.024Z,1520555490.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:30.426Z,1520555490.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:30.822Z,1520555490.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:31.229Z,1520555491.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:31.631Z,1520555491.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:32.031Z,1520555492.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:32.435Z,1520555492.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:32.827Z,1520555492.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:33.232Z,1520555493.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:33.637Z,1520555493.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:34.038Z,1520555494.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:34.433Z,1520555494.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:34.822Z,1520555494.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:35.219Z,1520555495.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:35.616Z,1520555495.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:36.026Z,1520555496.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:36.426Z,1520555496.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:36.818Z,1520555496.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:37.223Z,1520555497.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:37.626Z,1520555497.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:38.022Z,1520555498.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:38.445Z,1520555498.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:38.845Z,1520555498.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:39.229Z,1520555499.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:39.636Z,1520555499.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:40.036Z,1520555500.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:40.419Z,1520555500.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:40.818Z,1520555500.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:41.240Z,1520555501.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:41.643Z,1520555501.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:42.036Z,1520555502.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:42.420Z,1520555502.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:42.820Z,1520555502.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:43.233Z,1520555503.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:43.641Z,1520555503.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:44.059Z,1520555504.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:44.448Z,1520555504.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:44.847Z,1520555504.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:45.229Z,1520555505.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:45.627Z,1520555505.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:46.027Z,1520555506.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:46.425Z,1520555506.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:46.821Z,1520555506.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:47.227Z,1520555507.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:47.624Z,1520555507.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:48.032Z,1520555508.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:48.438Z,1520555508.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:48.821Z,1520555508.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:49.225Z,1520555509.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:49.623Z,1520555509.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:50.019Z,1520555510.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:50.430Z,1520555510.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:50.826Z,1520555510.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:51.222Z,1520555511.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:51.631Z,1520555511.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:52.026Z,1520555512.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:52.428Z,1520555512.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:52.833Z,1520555512.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:53.236Z,1520555513.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:53.617Z,1520555513.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:54.032Z,1520555514.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:54.419Z,1520555514.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:54.819Z,1520555514.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:55.219Z,1520555515.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:55.618Z,1520555515.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:56.018Z,1520555516.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:56.432Z,1520555516.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:56.829Z,1520555516.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:57.229Z,1520555517.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:57.624Z,1520555517.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:58.030Z,1520555518.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:58.419Z,1520555518.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:58.827Z,1520555518.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:59.227Z,1520555519.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:31:59.624Z,1520555519.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:00.026Z,1520555520.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:00.426Z,1520555520.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:00.821Z,1520555520.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:01.236Z,1520555521.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:01.641Z,1520555521.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:02.018Z,1520555522.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:02.418Z,1520555522.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:02.818Z,1520555522.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:03.218Z,1520555523.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:03.618Z,1520555523.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:04.026Z,1520555524.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:04.422Z,1520555524.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:04.823Z,1520555524.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:05.226Z,1520555525.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:05.629Z,1520555525.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:06.045Z,1520555526.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:06.441Z,1520555526.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:06.503Z,1520555526.503 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-09T00:32:06.836Z,1520555526.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:07.238Z,1520555527.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:07.622Z,1520555527.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:08.022Z,1520555528.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:08.422Z,1520555528.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:08.463Z,1520555528.463 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-09T00:27:08.1Z
2018-03-09T00:32:08.463Z,1520555528.463 [Default:CheckIn:Read_GPS] Stopped
2018-03-09T00:32:08.463Z,1520555528.463 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-09T00:32:08.825Z,1520555528.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:09.368Z,1520555529.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:09.624Z,1520555529.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:10.026Z,1520555530.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:13.375Z,1520555533.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:13.501Z,1520555533.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:13.842Z,1520555533.842 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0404.lzma
2018-03-09T00:32:13.875Z,1520555533.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:14.272Z,1520555534.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:14.640Z,1520555534.640 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0404.lzma.bak
2018-03-09T00:32:14.640Z,1520555534.640 [DataOverHttps](INFO): SBD MOMSN=7990528
2018-03-09T00:32:14.690Z,1520555534.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:15.276Z,1520555535.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:15.480Z,1520555535.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:18.826Z,1520555538.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:18.955Z,1520555538.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:19.324Z,1520555539.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:19.736Z,1520555539.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:20.108Z,1520555540.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:20.518Z,1520555540.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:23.722Z,1520555543.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:23.868Z,1520555543.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:24.209Z,1520555544.209 [DataOverHttps](INFO): Sending 122 bytes from file Logs/20180308T074127/Express0405.lzma
2018-03-09T00:32:24.242Z,1520555544.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:24.645Z,1520555544.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:25.008Z,1520555545.008 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0405.lzma.bak
2018-03-09T00:32:25.008Z,1520555545.008 [DataOverHttps](INFO): SBD MOMSN=7990530
2018-03-09T00:32:25.062Z,1520555545.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:25.645Z,1520555545.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:25.694Z,1520555545.694 [Default:CheckIn:Read_Iridium] Stopped
2018-03-09T00:32:25.694Z,1520555545.694 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-09T00:32:25.694Z,1520555545.694 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-09T00:32:25.841Z,1520555545.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:26.241Z,1520555546.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:29.354Z,1520555549.354 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-09T00:32:29.381Z,1520555549.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:29.490Z,1520555549.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:29.884Z,1520555549.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:30.279Z,1520555550.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:30.682Z,1520555550.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:31.087Z,1520555551.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:31.475Z,1520555551.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:31.878Z,1520555551.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:32.277Z,1520555552.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:32.675Z,1520555552.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:33.078Z,1520555553.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:33.478Z,1520555553.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:33.882Z,1520555553.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:34.283Z,1520555554.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:34.678Z,1520555554.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:35.082Z,1520555555.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:35.481Z,1520555555.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:35.878Z,1520555555.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:36.274Z,1520555556.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:36.293Z,1520555556.293 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T00:32:36.293Z,1520555556.293 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-03-09T00:32:36.293Z,1520555556.293 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T00:32:36.305Z,1520555556.305 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T00:32:36.690Z,1520555556.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:36.719Z,1520555556.719 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T00:32:36.719Z,1520555556.719 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-03-09T00:32:37.069Z,1520555557.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:37.097Z,1520555557.097 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T00:32:37.098Z,1520555557.098 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T00:32:37.098Z,1520555557.098 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T00:32:37.470Z,1520555557.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:37.890Z,1520555557.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:38.270Z,1520555558.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:38.668Z,1520555558.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:39.074Z,1520555559.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:39.469Z,1520555559.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:39.874Z,1520555559.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:40.270Z,1520555560.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:40.670Z,1520555560.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:41.066Z,1520555561.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:41.470Z,1520555561.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:41.870Z,1520555561.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:42.265Z,1520555562.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:42.670Z,1520555562.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:43.070Z,1520555563.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:43.470Z,1520555563.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:43.874Z,1520555563.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:44.270Z,1520555564.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:44.670Z,1520555564.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:45.073Z,1520555565.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:45.470Z,1520555565.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:45.883Z,1520555565.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:46.286Z,1520555566.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:46.676Z,1520555566.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:47.066Z,1520555567.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:47.472Z,1520555567.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:47.864Z,1520555567.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:48.274Z,1520555568.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:48.673Z,1520555568.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:49.072Z,1520555569.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:49.474Z,1520555569.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:49.869Z,1520555569.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:50.270Z,1520555570.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:50.707Z,1520555570.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:51.071Z,1520555571.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:51.470Z,1520555571.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:51.878Z,1520555571.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:52.276Z,1520555572.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:52.681Z,1520555572.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:53.080Z,1520555573.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:53.473Z,1520555573.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:53.876Z,1520555573.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:54.276Z,1520555574.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:54.675Z,1520555574.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:55.075Z,1520555575.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:55.484Z,1520555575.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:55.883Z,1520555575.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:56.273Z,1520555576.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:56.674Z,1520555576.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:57.078Z,1520555577.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:57.488Z,1520555577.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:57.878Z,1520555577.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:58.278Z,1520555578.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:58.673Z,1520555578.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:59.066Z,1520555579.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:59.467Z,1520555579.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:32:59.854Z,1520555579.854 [NAL9602](INFO): Powering down
2018-03-09T00:32:59.876Z,1520555579.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:00.270Z,1520555580.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:00.663Z,1520555580.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:01.074Z,1520555581.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:01.466Z,1520555581.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:01.866Z,1520555581.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:02.271Z,1520555582.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:02.674Z,1520555582.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:03.074Z,1520555583.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:03.470Z,1520555583.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:03.870Z,1520555583.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:04.275Z,1520555584.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:04.670Z,1520555584.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:05.070Z,1520555585.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:05.475Z,1520555585.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:05.875Z,1520555585.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:06.273Z,1520555586.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:06.674Z,1520555586.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:07.086Z,1520555587.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:07.482Z,1520555587.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:07.875Z,1520555587.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:08.278Z,1520555588.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:08.674Z,1520555588.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:09.079Z,1520555589.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:09.478Z,1520555589.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:09.878Z,1520555589.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:10.274Z,1520555590.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:10.687Z,1520555590.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:11.075Z,1520555591.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:11.478Z,1520555591.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:11.878Z,1520555591.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:12.275Z,1520555592.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:12.675Z,1520555592.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:13.087Z,1520555593.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:13.478Z,1520555593.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:13.867Z,1520555593.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:14.277Z,1520555594.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:14.682Z,1520555594.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:15.082Z,1520555595.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:15.486Z,1520555595.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:15.866Z,1520555595.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:16.270Z,1520555596.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:16.670Z,1520555596.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:17.074Z,1520555597.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:17.470Z,1520555597.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:17.874Z,1520555597.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:18.270Z,1520555598.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:18.668Z,1520555598.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:19.070Z,1520555599.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:19.475Z,1520555599.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:19.878Z,1520555599.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:20.278Z,1520555600.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:20.677Z,1520555600.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:21.077Z,1520555601.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:21.474Z,1520555601.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:21.881Z,1520555601.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:22.281Z,1520555602.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:22.676Z,1520555602.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:23.066Z,1520555603.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:23.468Z,1520555603.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:23.873Z,1520555603.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:24.270Z,1520555604.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:24.667Z,1520555604.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:25.070Z,1520555605.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:25.471Z,1520555605.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:25.865Z,1520555605.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:26.270Z,1520555606.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:29.457Z,1520555609.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:29.577Z,1520555609.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:29.965Z,1520555609.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:30.362Z,1520555610.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:30.755Z,1520555610.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:31.163Z,1520555611.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:31.565Z,1520555611.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:31.962Z,1520555611.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:32.361Z,1520555612.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:32.762Z,1520555612.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:33.163Z,1520555613.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:33.563Z,1520555613.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:33.962Z,1520555613.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:34.358Z,1520555614.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:34.761Z,1520555614.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:35.166Z,1520555615.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:35.548Z,1520555615.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:35.960Z,1520555615.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:36.350Z,1520555616.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:36.748Z,1520555616.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:37.154Z,1520555617.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:37.550Z,1520555617.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:37.954Z,1520555617.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:38.362Z,1520555618.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:38.754Z,1520555618.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:39.155Z,1520555619.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:39.555Z,1520555619.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:39.955Z,1520555619.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:40.356Z,1520555620.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:40.755Z,1520555620.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:41.162Z,1520555621.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:41.558Z,1520555621.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:41.959Z,1520555621.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:42.362Z,1520555622.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:42.758Z,1520555622.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:43.161Z,1520555623.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:43.561Z,1520555623.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:43.962Z,1520555623.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:44.355Z,1520555624.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:44.756Z,1520555624.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:45.168Z,1520555625.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:45.581Z,1520555625.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:45.955Z,1520555625.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:46.353Z,1520555626.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:46.754Z,1520555626.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:47.154Z,1520555627.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:47.556Z,1520555627.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:47.954Z,1520555627.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:48.354Z,1520555628.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:48.755Z,1520555628.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:49.158Z,1520555629.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:49.562Z,1520555629.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:49.961Z,1520555629.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:50.362Z,1520555630.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:50.764Z,1520555630.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:51.158Z,1520555631.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:51.565Z,1520555631.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:51.963Z,1520555631.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:52.359Z,1520555632.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:52.762Z,1520555632.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:53.166Z,1520555633.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:53.551Z,1520555633.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:53.966Z,1520555633.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:54.362Z,1520555634.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:54.749Z,1520555634.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:55.154Z,1520555635.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:55.571Z,1520555635.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:55.966Z,1520555635.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:56.354Z,1520555636.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:56.767Z,1520555636.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:57.155Z,1520555637.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:57.554Z,1520555637.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:57.966Z,1520555637.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:58.366Z,1520555638.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:58.780Z,1520555638.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:59.174Z,1520555639.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:59.554Z,1520555639.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:33:59.954Z,1520555639.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:00.354Z,1520555640.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:00.751Z,1520555640.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:01.153Z,1520555641.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:01.559Z,1520555641.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:01.987Z,1520555641.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:02.357Z,1520555642.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:02.773Z,1520555642.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:03.158Z,1520555643.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:03.560Z,1520555643.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:03.962Z,1520555643.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:04.362Z,1520555644.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:04.754Z,1520555644.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:05.156Z,1520555645.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:05.578Z,1520555645.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:05.954Z,1520555645.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:06.354Z,1520555646.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:06.754Z,1520555646.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:07.154Z,1520555647.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:07.558Z,1520555647.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:07.962Z,1520555647.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:08.361Z,1520555648.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:08.759Z,1520555648.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:09.159Z,1520555649.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:09.562Z,1520555649.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:09.964Z,1520555649.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:10.363Z,1520555650.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:10.770Z,1520555650.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:11.160Z,1520555651.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:11.565Z,1520555651.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:11.964Z,1520555651.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:12.372Z,1520555652.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:12.766Z,1520555652.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:13.176Z,1520555653.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:13.561Z,1520555653.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:13.967Z,1520555653.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:14.383Z,1520555654.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:14.755Z,1520555654.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:15.155Z,1520555655.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:15.555Z,1520555655.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:15.960Z,1520555655.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:16.362Z,1520555656.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:16.771Z,1520555656.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:17.149Z,1520555657.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:17.563Z,1520555657.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:17.962Z,1520555657.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:18.359Z,1520555658.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:18.763Z,1520555658.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:19.172Z,1520555659.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:19.559Z,1520555659.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:19.962Z,1520555659.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:20.362Z,1520555660.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:20.754Z,1520555660.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:21.159Z,1520555661.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:21.570Z,1520555661.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:21.962Z,1520555661.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:22.366Z,1520555662.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:22.760Z,1520555662.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:23.155Z,1520555663.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:23.562Z,1520555663.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:23.962Z,1520555663.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:24.358Z,1520555664.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:24.766Z,1520555664.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:25.162Z,1520555665.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:25.559Z,1520555665.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:25.963Z,1520555665.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:26.362Z,1520555666.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:29.620Z,1520555669.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:29.737Z,1520555669.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:30.131Z,1520555670.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:30.528Z,1520555670.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:30.936Z,1520555670.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:31.333Z,1520555671.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:31.729Z,1520555671.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:32.132Z,1520555672.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:32.534Z,1520555672.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:32.934Z,1520555672.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:33.344Z,1520555673.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:33.731Z,1520555673.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:34.131Z,1520555674.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:34.530Z,1520555674.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:34.932Z,1520555674.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:35.337Z,1520555675.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:35.734Z,1520555675.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:36.123Z,1520555676.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:36.519Z,1520555676.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:36.918Z,1520555676.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:37.322Z,1520555677.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:37.719Z,1520555677.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:38.118Z,1520555678.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:38.522Z,1520555678.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:38.919Z,1520555678.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:39.317Z,1520555679.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:39.722Z,1520555679.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:40.122Z,1520555680.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:40.534Z,1520555680.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:40.922Z,1520555680.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:41.319Z,1520555681.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:41.726Z,1520555681.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:42.129Z,1520555682.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:42.524Z,1520555682.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:42.930Z,1520555682.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:43.326Z,1520555683.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:43.719Z,1520555683.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:44.126Z,1520555684.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:44.530Z,1520555684.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:44.930Z,1520555684.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:45.331Z,1520555685.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:45.731Z,1520555685.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:46.129Z,1520555686.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:46.530Z,1520555686.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:46.931Z,1520555686.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:47.325Z,1520555687.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:47.735Z,1520555687.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:48.131Z,1520555688.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:48.529Z,1520555688.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:48.930Z,1520555688.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:49.335Z,1520555689.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:49.721Z,1520555689.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:50.127Z,1520555690.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:50.532Z,1520555690.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:50.927Z,1520555690.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:51.332Z,1520555691.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:51.731Z,1520555691.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:52.130Z,1520555692.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:52.529Z,1520555692.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:52.935Z,1520555692.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:53.328Z,1520555693.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:53.729Z,1520555693.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:54.127Z,1520555694.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:54.525Z,1520555694.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:54.932Z,1520555694.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:55.331Z,1520555695.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:55.718Z,1520555695.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:56.122Z,1520555696.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:56.542Z,1520555696.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:56.924Z,1520555696.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:57.328Z,1520555697.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:57.722Z,1520555697.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:58.126Z,1520555698.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:58.522Z,1520555698.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:58.922Z,1520555698.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:59.323Z,1520555699.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:34:59.726Z,1520555699.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:00.122Z,1520555700.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:00.522Z,1520555700.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:00.922Z,1520555700.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:01.322Z,1520555701.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:01.718Z,1520555701.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:02.128Z,1520555702.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:02.522Z,1520555702.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:02.957Z,1520555702.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:03.324Z,1520555703.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:03.726Z,1520555703.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:04.135Z,1520555704.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:04.524Z,1520555704.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:04.931Z,1520555704.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:05.328Z,1520555705.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:05.726Z,1520555705.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:06.128Z,1520555706.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:06.526Z,1520555706.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:06.938Z,1520555706.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:07.325Z,1520555707.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:07.734Z,1520555707.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:08.119Z,1520555708.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:08.522Z,1520555708.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:08.927Z,1520555708.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:09.319Z,1520555709.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:09.727Z,1520555709.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:10.130Z,1520555710.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:10.556Z,1520555710.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:10.931Z,1520555710.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:11.327Z,1520555711.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:11.725Z,1520555711.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:12.127Z,1520555712.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:12.531Z,1520555712.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:12.923Z,1520555712.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:13.327Z,1520555713.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:13.732Z,1520555713.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:14.131Z,1520555714.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:14.528Z,1520555714.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:14.934Z,1520555714.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:15.327Z,1520555715.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:15.730Z,1520555715.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:16.126Z,1520555716.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:16.528Z,1520555716.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:16.939Z,1520555716.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:17.318Z,1520555717.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:17.719Z,1520555717.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:18.122Z,1520555718.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:18.523Z,1520555718.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:18.919Z,1520555718.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:19.323Z,1520555719.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:19.718Z,1520555719.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:20.138Z,1520555720.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:20.542Z,1520555720.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:20.922Z,1520555720.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:21.316Z,1520555721.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:21.726Z,1520555721.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:22.118Z,1520555722.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:22.519Z,1520555722.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:22.922Z,1520555722.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:23.330Z,1520555723.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:23.723Z,1520555723.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:24.126Z,1520555724.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:24.549Z,1520555724.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:24.930Z,1520555724.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:25.338Z,1520555725.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:25.733Z,1520555725.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:26.130Z,1520555726.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:26.549Z,1520555726.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:30.564Z,1520555730.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:30.691Z,1520555730.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:31.051Z,1520555731.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:31.450Z,1520555731.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:31.850Z,1520555731.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:32.246Z,1520555732.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:32.646Z,1520555732.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:33.046Z,1520555733.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:33.455Z,1520555733.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:33.846Z,1520555733.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:34.241Z,1520555734.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:34.650Z,1520555734.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:35.046Z,1520555735.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:35.435Z,1520555735.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:35.850Z,1520555735.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:36.249Z,1520555736.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:36.634Z,1520555736.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:37.038Z,1520555737.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:37.438Z,1520555737.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:37.469Z,1520555737.469 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T00:35:37.469Z,1520555737.469 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-03-09T00:35:37.469Z,1520555737.469 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T00:35:37.481Z,1520555737.481 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T00:35:37.834Z,1520555737.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:37.880Z,1520555737.880 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T00:35:37.880Z,1520555737.880 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-03-09T00:35:38.239Z,1520555738.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:38.281Z,1520555738.281 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T00:35:38.281Z,1520555738.281 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T00:35:38.281Z,1520555738.281 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T00:35:38.638Z,1520555738.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:39.041Z,1520555739.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:39.438Z,1520555739.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:39.842Z,1520555739.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:40.243Z,1520555740.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:40.650Z,1520555740.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:41.042Z,1520555741.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:41.439Z,1520555741.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:41.847Z,1520555741.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:42.259Z,1520555742.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:42.648Z,1520555742.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:43.040Z,1520555743.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:43.440Z,1520555743.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:43.845Z,1520555743.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:44.245Z,1520555744.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:44.647Z,1520555744.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:45.062Z,1520555745.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:45.447Z,1520555745.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:45.854Z,1520555745.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:46.238Z,1520555746.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:46.638Z,1520555746.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:47.042Z,1520555747.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:47.438Z,1520555747.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:47.838Z,1520555747.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:48.242Z,1520555748.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:48.638Z,1520555748.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:49.038Z,1520555749.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:49.444Z,1520555749.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:49.844Z,1520555749.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:50.246Z,1520555750.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:50.652Z,1520555750.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:51.045Z,1520555751.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:51.446Z,1520555751.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:51.847Z,1520555751.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:52.246Z,1520555752.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:52.648Z,1520555752.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:53.047Z,1520555753.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:53.446Z,1520555753.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:53.844Z,1520555753.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:54.247Z,1520555754.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:54.647Z,1520555754.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:55.046Z,1520555755.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:55.442Z,1520555755.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:55.846Z,1520555755.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:56.245Z,1520555756.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:56.638Z,1520555756.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:57.050Z,1520555757.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:57.447Z,1520555757.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:57.842Z,1520555757.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:58.245Z,1520555758.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:58.650Z,1520555758.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:59.046Z,1520555759.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:59.454Z,1520555759.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:35:59.856Z,1520555759.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:00.247Z,1520555760.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:00.647Z,1520555760.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:01.047Z,1520555761.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:01.435Z,1520555761.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:01.848Z,1520555761.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:02.247Z,1520555762.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:02.632Z,1520555762.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:03.038Z,1520555763.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:03.450Z,1520555763.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:03.838Z,1520555763.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:04.250Z,1520555764.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:04.638Z,1520555764.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:05.050Z,1520555765.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:05.523Z,1520555765.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:05.838Z,1520555765.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:06.251Z,1520555766.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:06.638Z,1520555766.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:07.038Z,1520555767.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:07.436Z,1520555767.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:07.838Z,1520555767.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:08.259Z,1520555768.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:08.634Z,1520555768.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:09.038Z,1520555769.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:09.438Z,1520555769.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:09.835Z,1520555769.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:10.238Z,1520555770.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:10.638Z,1520555770.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:11.039Z,1520555771.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:11.450Z,1520555771.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:11.838Z,1520555771.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:12.250Z,1520555772.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:12.638Z,1520555772.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:13.039Z,1520555773.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:13.438Z,1520555773.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:13.838Z,1520555773.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:14.238Z,1520555774.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:14.635Z,1520555774.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:15.038Z,1520555775.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:15.458Z,1520555775.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:15.836Z,1520555775.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:16.238Z,1520555776.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:16.642Z,1520555776.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:17.042Z,1520555777.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:17.438Z,1520555777.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:17.839Z,1520555777.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:18.234Z,1520555778.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:18.642Z,1520555778.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:19.038Z,1520555779.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:19.438Z,1520555779.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:19.842Z,1520555779.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:20.237Z,1520555780.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:20.635Z,1520555780.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:21.044Z,1520555781.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:21.438Z,1520555781.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:21.835Z,1520555781.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:22.242Z,1520555782.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:22.639Z,1520555782.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:23.038Z,1520555783.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:23.438Z,1520555783.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:23.838Z,1520555783.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:24.238Z,1520555784.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:24.642Z,1520555784.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:25.038Z,1520555785.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:25.438Z,1520555785.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:25.838Z,1520555785.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:26.238Z,1520555786.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:26.638Z,1520555786.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:29.889Z,1520555789.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:30.023Z,1520555790.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:30.369Z,1520555790.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:30.776Z,1520555790.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:31.170Z,1520555791.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:31.568Z,1520555791.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:31.969Z,1520555791.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:32.374Z,1520555792.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:32.774Z,1520555792.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:33.170Z,1520555793.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:33.567Z,1520555793.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:33.984Z,1520555793.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:34.373Z,1520555794.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:34.759Z,1520555794.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:35.158Z,1520555795.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:35.573Z,1520555795.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:35.958Z,1520555795.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:36.362Z,1520555796.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:36.779Z,1520555796.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:37.163Z,1520555797.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:37.562Z,1520555797.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:37.965Z,1520555797.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:38.358Z,1520555798.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:38.770Z,1520555798.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:39.166Z,1520555799.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:39.566Z,1520555799.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:39.962Z,1520555799.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:40.367Z,1520555800.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:40.762Z,1520555800.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:41.182Z,1520555801.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:41.564Z,1520555801.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:41.963Z,1520555801.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:42.362Z,1520555802.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:42.760Z,1520555802.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:43.162Z,1520555803.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:43.566Z,1520555803.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:43.967Z,1520555803.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:44.359Z,1520555804.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:44.777Z,1520555804.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:45.170Z,1520555805.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:45.566Z,1520555805.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:45.967Z,1520555805.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:46.372Z,1520555806.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:46.773Z,1520555806.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:47.169Z,1520555807.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:47.570Z,1520555807.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:47.970Z,1520555807.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:48.373Z,1520555808.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:48.768Z,1520555808.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:49.171Z,1520555809.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:49.572Z,1520555809.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:49.973Z,1520555809.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:50.358Z,1520555810.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:50.762Z,1520555810.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:51.159Z,1520555811.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:51.557Z,1520555811.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:51.966Z,1520555811.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:52.359Z,1520555812.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:52.758Z,1520555812.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:53.169Z,1520555813.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:53.562Z,1520555813.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:53.966Z,1520555813.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:54.362Z,1520555814.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:54.758Z,1520555814.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:55.165Z,1520555815.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:55.574Z,1520555815.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:55.976Z,1520555815.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:56.376Z,1520555816.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:56.779Z,1520555816.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:57.167Z,1520555817.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:57.576Z,1520555817.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:57.980Z,1520555817.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:58.370Z,1520555818.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:58.774Z,1520555818.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:59.170Z,1520555819.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:59.572Z,1520555819.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:36:59.971Z,1520555819.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:00.382Z,1520555820.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:00.759Z,1520555820.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:01.188Z,1520555821.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:01.562Z,1520555821.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:01.974Z,1520555821.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:02.376Z,1520555822.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:02.787Z,1520555822.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:03.159Z,1520555823.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:03.562Z,1520555823.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:03.966Z,1520555823.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:04.368Z,1520555824.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:04.767Z,1520555824.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:05.166Z,1520555825.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:05.559Z,1520555825.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:05.963Z,1520555825.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:06.365Z,1520555826.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:06.759Z,1520555826.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:07.162Z,1520555827.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:07.564Z,1520555827.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:07.967Z,1520555827.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:08.368Z,1520555828.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:08.770Z,1520555828.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:09.172Z,1520555829.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:09.571Z,1520555829.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:09.974Z,1520555829.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:10.358Z,1520555830.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:10.766Z,1520555830.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:11.174Z,1520555831.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:11.574Z,1520555831.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:11.962Z,1520555831.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:12.381Z,1520555832.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:12.762Z,1520555832.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:13.174Z,1520555833.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:13.562Z,1520555833.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:13.962Z,1520555833.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:14.375Z,1520555834.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:14.784Z,1520555834.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:15.162Z,1520555835.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:15.578Z,1520555835.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:15.964Z,1520555835.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:16.362Z,1520555836.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:16.776Z,1520555836.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:17.179Z,1520555837.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:17.563Z,1520555837.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:17.959Z,1520555837.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:18.363Z,1520555838.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:18.764Z,1520555838.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:19.155Z,1520555839.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:19.567Z,1520555839.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:19.962Z,1520555839.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:20.359Z,1520555840.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:20.774Z,1520555840.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:21.158Z,1520555841.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:21.562Z,1520555841.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:21.977Z,1520555841.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:22.362Z,1520555842.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:22.759Z,1520555842.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:23.181Z,1520555843.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:23.570Z,1520555843.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:23.971Z,1520555843.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:24.367Z,1520555844.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:24.767Z,1520555844.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:25.169Z,1520555845.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:25.567Z,1520555845.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:25.966Z,1520555845.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:25.992Z,1520555845.992 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-09T00:37:25.992Z,1520555845.992 [Default:CheckIn:C.Wait] Stopped
2018-03-09T00:37:25.992Z,1520555845.992 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-09T00:37:25.992Z,1520555845.992 [Default:CheckIn:D] Running Loop=1
2018-03-09T00:37:26.369Z,1520555846.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:26.394Z,1520555846.394 [Default:CheckIn:D] Stopped
2018-03-09T00:37:26.394Z,1520555846.394 [Default:CheckIn:E] Running Loop=1
2018-03-09T00:37:26.770Z,1520555846.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:26.797Z,1520555846.797 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1011.693164 min 
2018-03-09T00:37:26.798Z,1520555846.798 [Default:CheckIn:E] Stopped
2018-03-09T00:37:26.798Z,1520555846.798 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-09T00:37:26.798Z,1520555846.798 [Default:CheckIn] Stopped
2018-03-09T00:37:26.798Z,1520555846.798 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-09T00:37:26.798Z,1520555846.798 [Default:CheckIn](INFO): Running loop #102
2018-03-09T00:37:26.798Z,1520555846.798 [Default:CheckIn] Running Loop=102
2018-03-09T00:37:26.798Z,1520555846.798 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-09T00:37:26.798Z,1520555846.798 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-09T00:37:27.170Z,1520555847.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:30.435Z,1520555850.435 [NAL9602](INFO): Powering up
2018-03-09T00:37:30.452Z,1520555850.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:30.570Z,1520555850.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:30.978Z,1520555850.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:31.369Z,1520555851.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:31.767Z,1520555851.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:32.174Z,1520555852.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:32.572Z,1520555852.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:32.972Z,1520555852.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:33.376Z,1520555853.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:33.772Z,1520555853.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:34.180Z,1520555854.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:34.579Z,1520555854.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:34.984Z,1520555854.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:35.374Z,1520555855.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:35.779Z,1520555855.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:36.173Z,1520555856.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:36.576Z,1520555856.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:36.976Z,1520555856.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:37.369Z,1520555857.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:37.769Z,1520555857.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:38.171Z,1520555858.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:38.563Z,1520555858.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:38.966Z,1520555858.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:39.370Z,1520555859.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:39.763Z,1520555859.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:40.174Z,1520555860.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:40.566Z,1520555860.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:40.976Z,1520555860.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:41.358Z,1520555861.358 [NAL9602](INFO): NAL9602 initialized
2018-03-09T00:37:41.375Z,1520555861.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:41.771Z,1520555861.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:42.168Z,1520555862.168 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-09T00:37:42.168Z,1520555862.168 [NAL9602] Data Fault, FailCount= 1
2018-03-09T00:37:42.168Z,1520555862.168 [NAL9602](ERROR): Data Fault
2018-03-09T00:37:42.189Z,1520555862.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:42.309Z,1520555862.309 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-09T00:37:42.554Z,1520555862.554 [NAL9602](INFO): Powering down
2018-03-09T00:37:42.594Z,1520555862.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:42.968Z,1520555862.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:43.381Z,1520555863.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:43.473Z,1520555863.473 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-09T00:37:43.474Z,1520555863.474 [NAL9602] No Fault, FailCount= 1
2018-03-09T00:37:43.775Z,1520555863.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:44.175Z,1520555864.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:44.569Z,1520555864.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:44.982Z,1520555864.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:45.373Z,1520555865.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:45.776Z,1520555865.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:46.194Z,1520555866.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:46.579Z,1520555866.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:46.966Z,1520555866.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:47.366Z,1520555867.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:47.766Z,1520555867.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:48.163Z,1520555868.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:48.566Z,1520555868.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:48.966Z,1520555868.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:49.363Z,1520555869.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:49.766Z,1520555869.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:50.166Z,1520555870.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:50.566Z,1520555870.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:50.971Z,1520555870.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:51.374Z,1520555871.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:51.760Z,1520555871.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:52.171Z,1520555872.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:52.573Z,1520555872.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:52.975Z,1520555872.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:53.375Z,1520555873.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:53.774Z,1520555873.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:54.171Z,1520555874.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:54.574Z,1520555874.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:54.974Z,1520555874.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:55.374Z,1520555875.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:55.773Z,1520555875.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:56.174Z,1520555876.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:56.570Z,1520555876.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:56.974Z,1520555876.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:57.374Z,1520555877.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:57.773Z,1520555877.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:58.173Z,1520555878.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:58.574Z,1520555878.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:58.966Z,1520555878.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:59.366Z,1520555879.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:37:59.766Z,1520555879.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:00.160Z,1520555880.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:00.632Z,1520555880.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:00.966Z,1520555880.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:01.363Z,1520555881.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:01.766Z,1520555881.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:02.162Z,1520555882.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:02.567Z,1520555882.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:02.971Z,1520555882.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:03.371Z,1520555883.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:03.770Z,1520555883.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:04.175Z,1520555884.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:04.573Z,1520555884.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:04.975Z,1520555884.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:05.375Z,1520555885.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:05.774Z,1520555885.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:06.171Z,1520555886.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:06.568Z,1520555886.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:06.978Z,1520555886.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:07.372Z,1520555887.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:07.774Z,1520555887.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:08.174Z,1520555888.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:08.574Z,1520555888.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:08.974Z,1520555888.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:09.374Z,1520555889.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:09.771Z,1520555889.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:10.168Z,1520555890.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:10.573Z,1520555890.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:10.974Z,1520555890.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:11.369Z,1520555891.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:11.770Z,1520555891.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:12.173Z,1520555892.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:12.568Z,1520555892.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:12.954Z,1520555892.954 [NAL9602](INFO): Powering up NAL9602
2018-03-09T00:38:12.983Z,1520555892.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:13.373Z,1520555893.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:13.768Z,1520555893.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:14.176Z,1520555894.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:14.572Z,1520555894.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:14.969Z,1520555894.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:15.366Z,1520555895.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:15.764Z,1520555895.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:16.167Z,1520555896.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:16.566Z,1520555896.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:16.970Z,1520555896.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:17.366Z,1520555897.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:17.765Z,1520555897.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:18.163Z,1520555898.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:18.566Z,1520555898.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:18.967Z,1520555898.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:19.363Z,1520555899.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:19.766Z,1520555899.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:20.162Z,1520555900.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:20.560Z,1520555900.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:20.972Z,1520555900.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:21.370Z,1520555901.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:21.763Z,1520555901.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:22.166Z,1520555902.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:22.570Z,1520555902.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:22.966Z,1520555902.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:23.366Z,1520555903.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:23.786Z,1520555903.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:24.155Z,1520555904.155 [NAL9602](INFO): NAL9602 initialized
2018-03-09T00:38:24.171Z,1520555904.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:24.575Z,1520555904.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:24.977Z,1520555904.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:25.380Z,1520555905.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:25.781Z,1520555905.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:26.178Z,1520555906.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:26.575Z,1520555906.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:26.977Z,1520555906.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:30.234Z,1520555910.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:30.365Z,1520555910.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:30.738Z,1520555910.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:31.114Z,1520555911.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:31.518Z,1520555911.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:31.914Z,1520555911.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:32.314Z,1520555912.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:32.712Z,1520555912.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:33.114Z,1520555913.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:33.522Z,1520555913.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:33.918Z,1520555913.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:34.320Z,1520555914.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:34.733Z,1520555914.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:35.129Z,1520555915.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:35.532Z,1520555915.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:35.937Z,1520555915.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:36.314Z,1520555916.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:36.732Z,1520555916.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:37.126Z,1520555917.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:37.510Z,1520555917.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:37.935Z,1520555917.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:38.336Z,1520555918.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:38.362Z,1520555918.362 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T00:38:38.362Z,1520555918.362 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-03-09T00:38:38.362Z,1520555918.362 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T00:38:38.403Z,1520555918.403 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T00:38:38.712Z,1520555918.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:38.763Z,1520555918.763 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T00:38:38.763Z,1520555918.763 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-03-09T00:38:39.114Z,1520555919.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:39.155Z,1520555919.155 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T00:38:39.156Z,1520555919.156 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T00:38:39.156Z,1520555919.156 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T00:38:39.510Z,1520555919.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:39.939Z,1520555919.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:40.325Z,1520555920.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:40.725Z,1520555920.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:41.121Z,1520555921.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:41.526Z,1520555921.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:41.919Z,1520555921.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:42.312Z,1520555922.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:42.726Z,1520555922.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:43.114Z,1520555923.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:43.514Z,1520555923.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:43.919Z,1520555923.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:44.314Z,1520555924.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:44.714Z,1520555924.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:45.141Z,1520555925.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:45.537Z,1520555925.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:45.936Z,1520555925.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:46.329Z,1520555926.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:46.724Z,1520555926.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:47.113Z,1520555927.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:47.523Z,1520555927.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:47.923Z,1520555927.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:48.324Z,1520555928.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:48.723Z,1520555928.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:49.119Z,1520555929.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:49.522Z,1520555929.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:49.917Z,1520555929.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:50.341Z,1520555930.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:50.729Z,1520555930.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:51.132Z,1520555931.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:51.541Z,1520555931.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:51.927Z,1520555931.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:52.314Z,1520555932.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:52.714Z,1520555932.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:53.110Z,1520555933.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:53.519Z,1520555933.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:53.914Z,1520555933.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:54.310Z,1520555934.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:54.714Z,1520555934.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:55.118Z,1520555935.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:55.529Z,1520555935.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:55.937Z,1520555935.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:56.338Z,1520555936.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:56.733Z,1520555936.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:57.114Z,1520555937.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:57.542Z,1520555937.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:57.924Z,1520555937.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:58.315Z,1520555938.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:58.736Z,1520555938.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:59.114Z,1520555939.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:59.534Z,1520555939.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:38:59.914Z,1520555939.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:00.318Z,1520555940.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:00.725Z,1520555940.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:01.125Z,1520555941.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:01.538Z,1520555941.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:01.925Z,1520555941.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:02.318Z,1520555942.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:02.714Z,1520555942.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:03.118Z,1520555943.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:03.514Z,1520555943.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:03.914Z,1520555943.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:04.325Z,1520555944.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:04.720Z,1520555944.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:05.121Z,1520555945.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:05.524Z,1520555945.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:05.934Z,1520555945.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:06.326Z,1520555946.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:06.729Z,1520555946.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:07.131Z,1520555947.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:07.510Z,1520555947.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:07.912Z,1520555947.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:08.310Z,1520555948.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:08.714Z,1520555948.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:09.114Z,1520555949.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:09.510Z,1520555949.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:09.915Z,1520555949.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:10.314Z,1520555950.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:10.714Z,1520555950.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:11.125Z,1520555951.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:11.538Z,1520555951.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:11.925Z,1520555951.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:12.325Z,1520555952.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:12.723Z,1520555952.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:13.120Z,1520555953.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:13.523Z,1520555953.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:13.924Z,1520555953.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:14.324Z,1520555954.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:14.724Z,1520555954.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:15.121Z,1520555955.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:15.527Z,1520555955.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:15.914Z,1520555955.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:16.338Z,1520555956.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:16.725Z,1520555956.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:17.125Z,1520555957.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:17.525Z,1520555957.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:17.914Z,1520555957.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:18.314Z,1520555958.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:18.714Z,1520555958.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:19.114Z,1520555959.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:19.519Z,1520555959.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:19.938Z,1520555959.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:20.314Z,1520555960.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:20.718Z,1520555960.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:21.114Z,1520555961.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:21.537Z,1520555961.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:21.925Z,1520555961.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:22.324Z,1520555962.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:22.725Z,1520555962.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:23.114Z,1520555963.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:23.514Z,1520555963.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:23.910Z,1520555963.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:24.318Z,1520555964.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:24.714Z,1520555964.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:25.114Z,1520555965.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:25.518Z,1520555965.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:25.914Z,1520555965.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:26.315Z,1520555966.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:26.738Z,1520555966.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:27.125Z,1520555967.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:30.313Z,1520555970.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:30.462Z,1520555970.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:30.811Z,1520555970.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:31.210Z,1520555971.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:31.613Z,1520555971.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:32.015Z,1520555972.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:32.409Z,1520555972.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:32.822Z,1520555972.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:33.217Z,1520555973.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:33.615Z,1520555973.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:34.009Z,1520555974.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:34.409Z,1520555974.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:34.811Z,1520555974.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:35.217Z,1520555975.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:35.601Z,1520555975.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:35.999Z,1520555975.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:36.407Z,1520555976.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:36.813Z,1520555976.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:37.209Z,1520555977.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:37.606Z,1520555977.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:38.014Z,1520555978.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:38.409Z,1520555978.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:38.808Z,1520555978.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:39.203Z,1520555979.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:39.598Z,1520555979.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:40.014Z,1520555980.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:40.401Z,1520555980.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:40.799Z,1520555980.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:41.221Z,1520555981.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:41.619Z,1520555981.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:42.030Z,1520555982.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:42.399Z,1520555982.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:42.812Z,1520555982.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:43.208Z,1520555983.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:43.613Z,1520555983.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:44.013Z,1520555984.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:44.398Z,1520555984.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:44.809Z,1520555984.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:45.214Z,1520555985.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:45.600Z,1520555985.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:46.001Z,1520555986.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:46.433Z,1520555986.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:46.805Z,1520555986.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:47.229Z,1520555987.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:47.608Z,1520555987.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:48.006Z,1520555988.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:48.412Z,1520555988.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:48.799Z,1520555988.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:49.198Z,1520555989.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:49.600Z,1520555989.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:50.030Z,1520555990.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:50.402Z,1520555990.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:50.804Z,1520555990.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:51.210Z,1520555991.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:51.615Z,1520555991.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:52.011Z,1520555992.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:52.415Z,1520555992.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:52.811Z,1520555992.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:53.196Z,1520555993.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:53.600Z,1520555993.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:53.998Z,1520555993.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:54.395Z,1520555994.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:54.801Z,1520555994.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:55.200Z,1520555995.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:55.596Z,1520555995.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:56.000Z,1520555996.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:56.405Z,1520555996.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:56.799Z,1520555996.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:57.222Z,1520555997.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:57.603Z,1520555997.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:58.001Z,1520555998.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:58.399Z,1520555998.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:58.798Z,1520555998.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:59.187Z,1520555999.187 [NAL9602](INFO): SBD MO Status=2, MOMSN=4909, MT Status=2, MTMSN=0
2018-03-09T00:39:59.187Z,1520555999.187 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-09T00:39:59.207Z,1520555999.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:39:59.654Z,1520555999.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:00.001Z,1520556000.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:00.394Z,1520556000.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:00.800Z,1520556000.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:01.203Z,1520556001.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:01.634Z,1520556001.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:01.998Z,1520556001.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:02.403Z,1520556002.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:02.802Z,1520556002.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:03.200Z,1520556003.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:03.623Z,1520556003.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:04.011Z,1520556004.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:04.422Z,1520556004.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:04.807Z,1520556004.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:05.198Z,1520556005.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:05.601Z,1520556005.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:06.001Z,1520556006.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:06.399Z,1520556006.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:06.801Z,1520556006.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:07.215Z,1520556007.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:07.614Z,1520556007.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:08.007Z,1520556008.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:08.398Z,1520556008.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:08.798Z,1520556008.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:09.201Z,1520556009.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:09.597Z,1520556009.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:10.002Z,1520556010.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:10.414Z,1520556010.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:10.802Z,1520556010.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:11.199Z,1520556011.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:11.609Z,1520556011.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:11.999Z,1520556011.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:12.408Z,1520556012.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:12.806Z,1520556012.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:13.207Z,1520556013.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:13.594Z,1520556013.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:14.014Z,1520556014.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:14.400Z,1520556014.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:14.796Z,1520556014.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:15.204Z,1520556015.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:15.622Z,1520556015.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:16.021Z,1520556016.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:16.404Z,1520556016.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:16.809Z,1520556016.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:17.206Z,1520556017.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:17.608Z,1520556017.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:18.007Z,1520556018.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:18.415Z,1520556018.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:18.816Z,1520556018.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:19.219Z,1520556019.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:19.596Z,1520556019.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:20.028Z,1520556020.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:20.418Z,1520556020.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:20.797Z,1520556020.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:21.206Z,1520556021.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:21.601Z,1520556021.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:22.005Z,1520556022.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:22.401Z,1520556022.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:22.798Z,1520556022.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:23.198Z,1520556023.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:23.608Z,1520556023.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:24.005Z,1520556024.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:24.405Z,1520556024.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:24.816Z,1520556024.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:25.221Z,1520556025.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:25.610Z,1520556025.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:25.999Z,1520556025.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:26.402Z,1520556026.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:26.799Z,1520556026.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:27.230Z,1520556027.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:30.377Z,1520556030.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:30.508Z,1520556030.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:30.857Z,1520556030.857 [NAL9602](INFO): SBD MO Status=0, MOMSN=4909, MT Status=0, MTMSN=0
2018-03-09T00:40:30.857Z,1520556030.857 [NAL9602](INFO): No messages in MT queue
2018-03-09T00:40:30.876Z,1520556030.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:31.277Z,1520556031.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:31.696Z,1520556031.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:32.049Z,1520556032.049 [NAL9602](INFO): GPS fix at 20180309T003951: (21.315752, -157.876652)
2018-03-09T00:40:32.074Z,1520556032.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:32.116Z,1520556032.116 [Default:CheckIn:Read_GPS] Stopped
2018-03-09T00:40:32.116Z,1520556032.116 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-09T00:40:32.524Z,1520556032.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:32.997Z,1520556032.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:33.307Z,1520556033.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:36.579Z,1520556036.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:36.709Z,1520556036.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:37.049Z,1520556037.049 [DataOverHttps](INFO): Sending 63 bytes from file Logs/20180308T074127/Courier0408.lzma
2018-03-09T00:40:37.069Z,1520556037.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:37.468Z,1520556037.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:37.840Z,1520556037.840 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0408.lzma.bak
2018-03-09T00:40:37.840Z,1520556037.840 [DataOverHttps](INFO): SBD MOMSN=7990578
2018-03-09T00:40:37.873Z,1520556037.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:38.468Z,1520556038.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:38.666Z,1520556038.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:41.963Z,1520556041.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:42.108Z,1520556042.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:42.446Z,1520556042.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:42.828Z,1520556042.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:43.229Z,1520556043.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:43.638Z,1520556043.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:44.034Z,1520556044.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:44.434Z,1520556044.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:47.618Z,1520556047.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:47.775Z,1520556047.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:48.126Z,1520556048.126 [DataOverHttps](INFO): Sending 230 bytes from file Logs/20180308T074127/Express0409.lzma
2018-03-09T00:40:48.154Z,1520556048.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:48.530Z,1520556048.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:48.904Z,1520556048.904 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0409.lzma.bak
2018-03-09T00:40:48.904Z,1520556048.904 [DataOverHttps](INFO): SBD MOMSN=7990581
2018-03-09T00:40:48.942Z,1520556048.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:49.531Z,1520556049.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:49.551Z,1520556049.551 [Default:CheckIn:Read_Iridium] Stopped
2018-03-09T00:40:49.551Z,1520556049.551 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-09T00:40:49.552Z,1520556049.552 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-09T00:40:49.722Z,1520556049.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:50.138Z,1520556050.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:53.274Z,1520556053.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:53.401Z,1520556053.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:53.755Z,1520556053.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:54.156Z,1520556054.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:54.558Z,1520556054.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:54.958Z,1520556054.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:55.351Z,1520556055.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:55.749Z,1520556055.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:56.155Z,1520556056.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:56.551Z,1520556056.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:56.958Z,1520556056.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:57.353Z,1520556057.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:57.759Z,1520556057.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:58.158Z,1520556058.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:58.554Z,1520556058.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:58.953Z,1520556058.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:59.350Z,1520556059.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:40:59.762Z,1520556059.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:00.158Z,1520556060.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:00.551Z,1520556060.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:00.953Z,1520556060.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:01.358Z,1520556061.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:01.750Z,1520556061.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:02.166Z,1520556062.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:02.553Z,1520556062.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:02.942Z,1520556062.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:03.355Z,1520556063.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:03.754Z,1520556063.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:04.158Z,1520556064.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:04.562Z,1520556064.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:04.958Z,1520556064.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:05.343Z,1520556065.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:05.753Z,1520556065.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:06.149Z,1520556066.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:06.543Z,1520556066.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:06.930Z,1520556066.930 [NAL9602](INFO): Powering down
2018-03-09T00:41:06.948Z,1520556066.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:07.346Z,1520556067.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:07.740Z,1520556067.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:08.149Z,1520556068.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:08.551Z,1520556068.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:08.951Z,1520556068.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:09.358Z,1520556069.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:09.755Z,1520556069.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:10.150Z,1520556070.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:10.553Z,1520556070.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:10.963Z,1520556070.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:11.350Z,1520556071.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:11.754Z,1520556071.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:12.158Z,1520556072.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:12.554Z,1520556072.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:12.954Z,1520556072.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:13.352Z,1520556073.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:13.753Z,1520556073.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:14.162Z,1520556074.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:14.558Z,1520556074.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:14.951Z,1520556074.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:15.354Z,1520556075.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:15.749Z,1520556075.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:16.159Z,1520556076.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:16.567Z,1520556076.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:16.944Z,1520556076.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:17.350Z,1520556077.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:17.757Z,1520556077.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:18.155Z,1520556078.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:18.547Z,1520556078.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:18.946Z,1520556078.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:19.341Z,1520556079.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:19.761Z,1520556079.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:20.150Z,1520556080.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:20.540Z,1520556080.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:20.944Z,1520556080.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:21.347Z,1520556081.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:21.742Z,1520556081.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:22.142Z,1520556082.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:22.563Z,1520556082.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:22.947Z,1520556082.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:23.350Z,1520556083.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:23.758Z,1520556083.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:24.150Z,1520556084.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:24.548Z,1520556084.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:24.951Z,1520556084.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:25.350Z,1520556085.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:25.751Z,1520556085.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:26.154Z,1520556086.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:26.550Z,1520556086.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:26.950Z,1520556086.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:27.353Z,1520556087.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:27.750Z,1520556087.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:28.150Z,1520556088.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:28.553Z,1520556088.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:28.949Z,1520556088.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:29.351Z,1520556089.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:29.764Z,1520556089.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:30.150Z,1520556090.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:30.555Z,1520556090.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:30.953Z,1520556090.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:31.338Z,1520556091.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:31.750Z,1520556091.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:32.154Z,1520556092.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:32.552Z,1520556092.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:32.950Z,1520556092.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:33.354Z,1520556093.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:33.754Z,1520556093.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:34.154Z,1520556094.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:34.552Z,1520556094.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:34.949Z,1520556094.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:35.358Z,1520556095.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:35.754Z,1520556095.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:36.150Z,1520556096.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:36.558Z,1520556096.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:36.963Z,1520556096.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:37.351Z,1520556097.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:37.758Z,1520556097.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:38.166Z,1520556098.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:38.542Z,1520556098.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:38.946Z,1520556098.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:39.346Z,1520556099.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:39.384Z,1520556099.384 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T00:41:39.384Z,1520556099.384 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-09T00:41:39.384Z,1520556099.384 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T00:41:39.396Z,1520556099.396 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T00:41:39.742Z,1520556099.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:39.790Z,1520556099.790 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T00:41:39.790Z,1520556099.790 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-09T00:41:40.147Z,1520556100.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:40.185Z,1520556100.185 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T00:41:40.186Z,1520556100.186 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T00:41:40.186Z,1520556100.186 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T00:41:40.546Z,1520556100.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:40.950Z,1520556100.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:41.350Z,1520556101.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:41.749Z,1520556101.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:42.155Z,1520556102.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:42.555Z,1520556102.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:42.968Z,1520556102.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:43.372Z,1520556103.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:43.759Z,1520556103.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:44.157Z,1520556104.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:44.548Z,1520556104.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:44.946Z,1520556104.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:45.373Z,1520556105.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:45.749Z,1520556105.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:46.155Z,1520556106.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:46.553Z,1520556106.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:46.948Z,1520556106.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:47.348Z,1520556107.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:47.746Z,1520556107.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:48.146Z,1520556108.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:48.546Z,1520556108.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:48.950Z,1520556108.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:49.342Z,1520556109.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:49.746Z,1520556109.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:50.150Z,1520556110.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:53.362Z,1520556113.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:53.479Z,1520556113.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:53.858Z,1520556113.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:54.263Z,1520556114.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:54.662Z,1520556114.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:55.059Z,1520556115.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:55.461Z,1520556115.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:55.863Z,1520556115.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:56.271Z,1520556116.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:56.660Z,1520556116.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:57.063Z,1520556117.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:57.470Z,1520556117.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:57.862Z,1520556117.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:58.262Z,1520556118.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:58.670Z,1520556118.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:59.059Z,1520556119.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:59.466Z,1520556119.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:41:59.861Z,1520556119.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:00.266Z,1520556120.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:00.666Z,1520556120.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:01.064Z,1520556121.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:01.450Z,1520556121.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:01.863Z,1520556121.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:02.273Z,1520556122.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:02.650Z,1520556122.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:03.053Z,1520556123.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:03.454Z,1520556123.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:03.852Z,1520556123.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:04.256Z,1520556124.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:04.683Z,1520556124.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:05.054Z,1520556125.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:05.455Z,1520556125.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:05.888Z,1520556125.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:06.261Z,1520556126.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:06.657Z,1520556126.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:06.706Z,1520556126.706 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-09T00:42:07.066Z,1520556127.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:07.461Z,1520556127.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:07.856Z,1520556127.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:08.260Z,1520556128.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:08.658Z,1520556128.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:09.063Z,1520556129.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:09.460Z,1520556129.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:09.864Z,1520556129.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:10.257Z,1520556130.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:10.665Z,1520556130.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:11.064Z,1520556131.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:11.447Z,1520556131.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:11.861Z,1520556131.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:12.250Z,1520556132.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:12.651Z,1520556132.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:13.065Z,1520556133.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:13.450Z,1520556133.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:13.851Z,1520556133.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:14.258Z,1520556134.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:14.650Z,1520556134.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:15.050Z,1520556135.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:15.457Z,1520556135.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:15.854Z,1520556135.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:16.251Z,1520556136.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:16.666Z,1520556136.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:17.054Z,1520556137.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:17.461Z,1520556137.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:17.859Z,1520556137.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:18.266Z,1520556138.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:18.668Z,1520556138.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:19.064Z,1520556139.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:19.461Z,1520556139.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:19.859Z,1520556139.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:20.260Z,1520556140.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:20.669Z,1520556140.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:21.062Z,1520556141.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:21.461Z,1520556141.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:21.866Z,1520556141.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:22.252Z,1520556142.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:22.663Z,1520556142.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:23.050Z,1520556143.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:23.462Z,1520556143.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:23.861Z,1520556143.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:24.262Z,1520556144.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:24.662Z,1520556144.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:25.061Z,1520556145.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:25.450Z,1520556145.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:25.851Z,1520556145.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:26.265Z,1520556146.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:26.649Z,1520556146.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:27.067Z,1520556147.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:27.454Z,1520556147.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:27.849Z,1520556147.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:28.250Z,1520556148.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:28.654Z,1520556148.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:29.050Z,1520556149.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:29.454Z,1520556149.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:29.854Z,1520556149.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:30.254Z,1520556150.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:30.651Z,1520556150.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:31.054Z,1520556151.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:31.450Z,1520556151.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:31.850Z,1520556151.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:32.258Z,1520556152.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:32.654Z,1520556152.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:33.054Z,1520556153.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:33.462Z,1520556153.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:33.863Z,1520556153.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:34.259Z,1520556154.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:34.659Z,1520556154.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:35.058Z,1520556155.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:35.459Z,1520556155.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:35.860Z,1520556155.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:36.262Z,1520556156.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:36.659Z,1520556156.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:37.071Z,1520556157.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:37.463Z,1520556157.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:37.851Z,1520556157.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:38.273Z,1520556158.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:38.651Z,1520556158.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:39.050Z,1520556159.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:39.461Z,1520556159.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:39.866Z,1520556159.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:40.251Z,1520556160.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:40.658Z,1520556160.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:41.054Z,1520556161.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:41.451Z,1520556161.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:41.854Z,1520556161.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:42.250Z,1520556162.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:42.651Z,1520556162.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:43.054Z,1520556163.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:43.455Z,1520556163.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:43.848Z,1520556163.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:44.263Z,1520556164.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:44.663Z,1520556164.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:45.062Z,1520556165.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:45.463Z,1520556165.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:45.862Z,1520556165.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:46.258Z,1520556166.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:46.662Z,1520556166.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:47.058Z,1520556167.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:47.458Z,1520556167.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:47.871Z,1520556167.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:48.267Z,1520556168.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:48.647Z,1520556168.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:49.062Z,1520556169.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:49.463Z,1520556169.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:49.864Z,1520556169.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:50.264Z,1520556170.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:53.524Z,1520556173.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:53.644Z,1520556173.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:54.037Z,1520556174.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:54.430Z,1520556174.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:54.832Z,1520556174.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:55.239Z,1520556175.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:55.630Z,1520556175.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:56.031Z,1520556176.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:56.425Z,1520556176.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:56.827Z,1520556176.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:57.220Z,1520556177.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:57.621Z,1520556177.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:58.034Z,1520556178.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:58.430Z,1520556178.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:58.827Z,1520556178.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:59.229Z,1520556179.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:42:59.628Z,1520556179.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:00.034Z,1520556180.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:00.422Z,1520556180.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:00.819Z,1520556180.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:01.222Z,1520556181.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:01.626Z,1520556181.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:02.030Z,1520556182.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:02.432Z,1520556182.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:02.831Z,1520556182.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:03.229Z,1520556183.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:03.631Z,1520556183.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:04.029Z,1520556184.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:04.431Z,1520556184.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:04.828Z,1520556184.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:05.242Z,1520556185.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:05.623Z,1520556185.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:06.028Z,1520556186.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:06.435Z,1520556186.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:06.828Z,1520556186.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:07.242Z,1520556187.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:07.623Z,1520556187.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:08.027Z,1520556188.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:08.441Z,1520556188.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:08.821Z,1520556188.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:09.218Z,1520556189.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:09.622Z,1520556189.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:10.026Z,1520556190.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:10.426Z,1520556190.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:10.822Z,1520556190.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:11.224Z,1520556191.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:11.628Z,1520556191.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:12.028Z,1520556192.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:12.433Z,1520556192.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:12.830Z,1520556192.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:13.235Z,1520556193.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:13.630Z,1520556193.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:14.026Z,1520556194.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:14.429Z,1520556194.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:14.831Z,1520556194.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:15.223Z,1520556195.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:15.629Z,1520556195.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:16.031Z,1520556196.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:16.431Z,1520556196.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:16.828Z,1520556196.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:17.230Z,1520556197.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:17.629Z,1520556197.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:18.029Z,1520556198.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:18.430Z,1520556198.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:18.831Z,1520556198.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:19.222Z,1520556199.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:19.626Z,1520556199.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:20.026Z,1520556200.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:20.434Z,1520556200.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:20.829Z,1520556200.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:21.219Z,1520556201.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:21.622Z,1520556201.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:22.030Z,1520556202.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:22.429Z,1520556202.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:22.832Z,1520556202.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:23.230Z,1520556203.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:23.627Z,1520556203.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:24.041Z,1520556204.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:24.438Z,1520556204.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:24.819Z,1520556204.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:25.226Z,1520556205.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:25.622Z,1520556205.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:26.026Z,1520556206.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:26.434Z,1520556206.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:26.822Z,1520556206.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:27.222Z,1520556207.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:27.623Z,1520556207.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:28.030Z,1520556208.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:28.430Z,1520556208.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:28.830Z,1520556208.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:29.230Z,1520556209.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:29.630Z,1520556209.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:30.028Z,1520556210.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:30.435Z,1520556210.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:30.830Z,1520556210.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:31.222Z,1520556211.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:31.622Z,1520556211.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:32.022Z,1520556212.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:32.422Z,1520556212.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:32.833Z,1520556212.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:33.218Z,1520556213.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:33.642Z,1520556213.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:34.022Z,1520556214.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:34.428Z,1520556214.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:34.830Z,1520556214.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:35.230Z,1520556215.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:35.626Z,1520556215.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:36.030Z,1520556216.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:36.426Z,1520556216.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:36.830Z,1520556216.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:37.232Z,1520556217.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:37.628Z,1520556217.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:38.030Z,1520556218.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:38.435Z,1520556218.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:38.827Z,1520556218.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:39.223Z,1520556219.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:39.634Z,1520556219.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:40.034Z,1520556220.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:40.422Z,1520556220.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:40.842Z,1520556220.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:41.257Z,1520556221.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:41.622Z,1520556221.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:42.036Z,1520556222.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:42.418Z,1520556222.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:42.840Z,1520556222.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:43.237Z,1520556223.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:43.629Z,1520556223.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:44.034Z,1520556224.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:44.440Z,1520556224.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:44.822Z,1520556224.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:45.221Z,1520556225.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:45.624Z,1520556225.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:46.022Z,1520556226.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:46.422Z,1520556226.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:46.826Z,1520556226.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:47.219Z,1520556227.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:47.622Z,1520556227.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:48.030Z,1520556228.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:48.424Z,1520556228.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:48.827Z,1520556228.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:49.229Z,1520556229.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:49.630Z,1520556229.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:50.029Z,1520556230.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:50.428Z,1520556230.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:53.606Z,1520556233.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:53.720Z,1520556233.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:54.114Z,1520556234.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:54.502Z,1520556234.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:54.952Z,1520556234.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:55.305Z,1520556235.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:55.721Z,1520556235.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:56.135Z,1520556236.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:56.522Z,1520556236.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:56.906Z,1520556236.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:57.298Z,1520556237.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:57.697Z,1520556237.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:58.151Z,1520556238.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:58.546Z,1520556238.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:58.949Z,1520556238.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:59.317Z,1520556239.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:43:59.716Z,1520556239.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:00.141Z,1520556240.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:00.502Z,1520556240.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:00.911Z,1520556240.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:01.318Z,1520556241.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:01.702Z,1520556241.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:02.099Z,1520556242.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:02.518Z,1520556242.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:02.939Z,1520556242.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:03.301Z,1520556243.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:03.738Z,1520556243.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:04.132Z,1520556244.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:04.507Z,1520556244.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:04.917Z,1520556244.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:05.327Z,1520556245.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:05.723Z,1520556245.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:06.104Z,1520556246.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:06.513Z,1520556246.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:06.927Z,1520556246.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:07.314Z,1520556247.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:07.711Z,1520556247.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:08.115Z,1520556248.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:08.515Z,1520556248.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:08.912Z,1520556248.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:09.314Z,1520556249.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:09.710Z,1520556249.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:10.108Z,1520556250.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:10.526Z,1520556250.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:10.906Z,1520556250.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:11.342Z,1520556251.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:11.728Z,1520556251.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:12.120Z,1520556252.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:12.519Z,1520556252.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:12.929Z,1520556252.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:13.306Z,1520556253.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:13.733Z,1520556253.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:14.123Z,1520556254.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:14.532Z,1520556254.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:14.907Z,1520556254.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:15.310Z,1520556255.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:15.709Z,1520556255.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:16.107Z,1520556256.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:16.510Z,1520556256.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:16.909Z,1520556256.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:17.300Z,1520556257.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:17.701Z,1520556257.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:18.118Z,1520556258.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:18.501Z,1520556258.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:18.926Z,1520556258.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:19.319Z,1520556259.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:19.718Z,1520556259.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:20.123Z,1520556260.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:20.529Z,1520556260.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:20.902Z,1520556260.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:21.319Z,1520556261.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:21.701Z,1520556261.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:22.116Z,1520556262.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:22.528Z,1520556262.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:22.915Z,1520556262.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:23.311Z,1520556263.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:23.703Z,1520556263.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:24.114Z,1520556264.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:24.514Z,1520556264.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:24.895Z,1520556264.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:25.305Z,1520556265.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:25.708Z,1520556265.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:26.127Z,1520556266.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:26.511Z,1520556266.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:26.930Z,1520556266.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:27.302Z,1520556267.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:27.725Z,1520556267.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:28.123Z,1520556268.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:28.531Z,1520556268.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:28.936Z,1520556268.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:29.303Z,1520556269.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:29.714Z,1520556269.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:30.130Z,1520556270.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:30.512Z,1520556270.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:30.911Z,1520556270.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:31.309Z,1520556271.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:31.711Z,1520556271.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:32.114Z,1520556272.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:32.509Z,1520556272.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:32.905Z,1520556272.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:33.301Z,1520556273.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:33.723Z,1520556273.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:34.106Z,1520556274.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:34.509Z,1520556274.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:34.929Z,1520556274.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:35.333Z,1520556275.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:35.718Z,1520556275.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:36.127Z,1520556276.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:36.507Z,1520556276.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:36.916Z,1520556276.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:37.318Z,1520556277.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:37.716Z,1520556277.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:38.105Z,1520556278.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:38.518Z,1520556278.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:38.915Z,1520556278.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:39.312Z,1520556279.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:39.723Z,1520556279.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:40.119Z,1520556280.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:40.503Z,1520556280.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:40.544Z,1520556280.544 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T00:44:40.544Z,1520556280.544 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-09T00:44:40.544Z,1520556280.544 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T00:44:40.600Z,1520556280.600 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T00:44:40.914Z,1520556280.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:40.957Z,1520556280.957 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T00:44:40.957Z,1520556280.957 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-09T00:44:41.307Z,1520556281.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:41.345Z,1520556281.345 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T00:44:41.346Z,1520556281.346 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T00:44:41.346Z,1520556281.346 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T00:44:41.699Z,1520556281.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:42.125Z,1520556282.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:42.506Z,1520556282.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:42.913Z,1520556282.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:43.325Z,1520556283.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:43.735Z,1520556283.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:44.128Z,1520556284.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:44.531Z,1520556284.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:44.936Z,1520556284.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:45.309Z,1520556285.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:45.730Z,1520556285.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:46.111Z,1520556286.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:46.509Z,1520556286.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:46.906Z,1520556286.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:47.311Z,1520556287.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:47.708Z,1520556287.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:48.110Z,1520556288.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:48.507Z,1520556288.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:48.902Z,1520556288.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:49.332Z,1520556289.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:49.702Z,1520556289.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:50.144Z,1520556290.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:50.523Z,1520556290.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:53.749Z,1520556293.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:53.864Z,1520556293.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:54.261Z,1520556294.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:54.661Z,1520556294.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:55.063Z,1520556295.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:55.462Z,1520556295.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:55.854Z,1520556295.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:56.254Z,1520556296.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:56.667Z,1520556296.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:57.059Z,1520556297.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:57.458Z,1520556297.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:57.867Z,1520556297.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:58.245Z,1520556298.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:58.646Z,1520556298.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:59.070Z,1520556299.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:59.446Z,1520556299.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:44:59.843Z,1520556299.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:00.250Z,1520556300.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:00.654Z,1520556300.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:01.055Z,1520556301.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:01.450Z,1520556301.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:01.846Z,1520556301.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:02.254Z,1520556302.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:02.650Z,1520556302.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:03.050Z,1520556303.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:03.450Z,1520556303.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:03.867Z,1520556303.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:04.250Z,1520556304.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:04.646Z,1520556304.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:05.054Z,1520556305.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:05.446Z,1520556305.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:05.851Z,1520556305.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:06.253Z,1520556306.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:06.654Z,1520556306.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:07.054Z,1520556307.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:07.454Z,1520556307.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:07.858Z,1520556307.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:08.252Z,1520556308.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:08.656Z,1520556308.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:09.053Z,1520556309.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:09.455Z,1520556309.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:09.855Z,1520556309.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:10.258Z,1520556310.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:10.658Z,1520556310.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:11.058Z,1520556311.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:11.459Z,1520556311.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:11.853Z,1520556311.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:12.257Z,1520556312.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:12.646Z,1520556312.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:13.055Z,1520556313.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:13.450Z,1520556313.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:13.854Z,1520556313.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:14.247Z,1520556314.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:14.649Z,1520556314.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:15.055Z,1520556315.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:15.455Z,1520556315.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:15.857Z,1520556315.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:16.258Z,1520556316.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:16.654Z,1520556316.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:17.066Z,1520556317.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:17.460Z,1520556317.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:17.858Z,1520556317.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:18.264Z,1520556318.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:18.658Z,1520556318.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:19.059Z,1520556319.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:19.459Z,1520556319.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:19.855Z,1520556319.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:20.263Z,1520556320.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:20.656Z,1520556320.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:21.046Z,1520556321.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:21.446Z,1520556321.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:21.858Z,1520556321.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:22.247Z,1520556322.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:22.646Z,1520556322.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:23.046Z,1520556323.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:23.458Z,1520556323.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:23.859Z,1520556323.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:24.258Z,1520556324.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:24.659Z,1520556324.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:25.058Z,1520556325.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:25.469Z,1520556325.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:25.858Z,1520556325.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:26.246Z,1520556326.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:26.658Z,1520556326.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:27.059Z,1520556327.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:27.446Z,1520556327.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:27.858Z,1520556327.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:28.262Z,1520556328.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:28.647Z,1520556328.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:29.058Z,1520556329.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:29.462Z,1520556329.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:29.847Z,1520556329.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:30.258Z,1520556330.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:30.669Z,1520556330.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:31.062Z,1520556331.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:31.459Z,1520556331.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:31.869Z,1520556331.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:32.263Z,1520556332.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:32.669Z,1520556332.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:33.057Z,1520556333.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:33.446Z,1520556333.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:33.857Z,1520556333.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:34.258Z,1520556334.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:34.647Z,1520556334.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:35.058Z,1520556335.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:35.453Z,1520556335.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:35.846Z,1520556335.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:36.254Z,1520556336.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:36.653Z,1520556336.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:37.054Z,1520556337.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:37.450Z,1520556337.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:37.854Z,1520556337.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:38.250Z,1520556338.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:38.670Z,1520556338.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:39.054Z,1520556339.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:39.446Z,1520556339.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:39.850Z,1520556339.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:40.254Z,1520556340.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:40.651Z,1520556340.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:41.054Z,1520556341.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:41.450Z,1520556341.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:41.867Z,1520556341.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:42.265Z,1520556342.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:42.660Z,1520556342.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:43.052Z,1520556343.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:43.450Z,1520556343.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:43.858Z,1520556343.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:44.270Z,1520556344.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:44.661Z,1520556344.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:45.052Z,1520556345.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:45.453Z,1520556345.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:45.856Z,1520556345.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:46.262Z,1520556346.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:46.655Z,1520556346.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:47.062Z,1520556347.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:47.464Z,1520556347.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:47.858Z,1520556347.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:48.267Z,1520556348.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:48.656Z,1520556348.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:49.055Z,1520556349.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:49.465Z,1520556349.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:49.855Z,1520556349.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:49.887Z,1520556349.887 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-09T00:45:49.887Z,1520556349.887 [Default:CheckIn:C.Wait] Stopped
2018-03-09T00:45:49.888Z,1520556349.888 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-09T00:45:49.888Z,1520556349.888 [Default:CheckIn:D] Running Loop=1
2018-03-09T00:45:50.248Z,1520556350.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:50.291Z,1520556350.291 [Default:CheckIn:D] Stopped
2018-03-09T00:45:50.292Z,1520556350.292 [Default:CheckIn:E] Running Loop=1
2018-03-09T00:45:50.651Z,1520556350.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:50.694Z,1520556350.694 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1020.091406 min 
2018-03-09T00:45:50.694Z,1520556350.694 [Default:CheckIn:E] Stopped
2018-03-09T00:45:50.694Z,1520556350.694 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-09T00:45:50.694Z,1520556350.694 [Default:CheckIn] Stopped
2018-03-09T00:45:50.694Z,1520556350.694 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-09T00:45:50.695Z,1520556350.695 [Default:CheckIn](INFO): Running loop #103
2018-03-09T00:45:50.695Z,1520556350.695 [Default:CheckIn] Running Loop=103
2018-03-09T00:45:50.695Z,1520556350.695 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-09T00:45:50.695Z,1520556350.695 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-09T00:45:51.055Z,1520556351.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:54.336Z,1520556354.336 [NAL9602](INFO): Powering up
2018-03-09T00:45:54.353Z,1520556354.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:54.483Z,1520556354.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:54.845Z,1520556354.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:55.238Z,1520556355.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:55.638Z,1520556355.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:56.038Z,1520556356.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:56.442Z,1520556356.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:56.832Z,1520556356.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:57.240Z,1520556357.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:57.640Z,1520556357.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:58.038Z,1520556358.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:58.438Z,1520556358.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:58.834Z,1520556358.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:59.239Z,1520556359.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:45:59.640Z,1520556359.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:00.038Z,1520556360.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:00.439Z,1520556360.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:00.846Z,1520556360.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:01.239Z,1520556361.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:01.631Z,1520556361.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:02.037Z,1520556362.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:02.438Z,1520556362.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:02.839Z,1520556362.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:03.238Z,1520556363.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:03.634Z,1520556363.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:04.035Z,1520556364.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:04.438Z,1520556364.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:04.863Z,1520556364.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:05.230Z,1520556365.230 [NAL9602](INFO): NAL9602 initialized
2018-03-09T00:46:05.247Z,1520556365.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:05.650Z,1520556365.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:06.064Z,1520556366.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:06.445Z,1520556366.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:06.857Z,1520556366.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:07.246Z,1520556367.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:07.652Z,1520556367.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:08.061Z,1520556368.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:08.449Z,1520556368.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:08.836Z,1520556368.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:09.238Z,1520556369.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:09.642Z,1520556369.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:10.036Z,1520556370.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:10.442Z,1520556370.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:10.842Z,1520556370.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:11.238Z,1520556371.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:11.638Z,1520556371.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:12.038Z,1520556372.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:12.453Z,1520556372.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:12.861Z,1520556372.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:13.250Z,1520556373.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:13.643Z,1520556373.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:14.042Z,1520556374.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:14.448Z,1520556374.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:14.834Z,1520556374.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:15.262Z,1520556375.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:15.634Z,1520556375.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:16.034Z,1520556376.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:16.437Z,1520556376.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:16.839Z,1520556376.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:17.237Z,1520556377.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:17.643Z,1520556377.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:18.039Z,1520556378.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:18.439Z,1520556378.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:18.838Z,1520556378.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:19.239Z,1520556379.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:19.636Z,1520556379.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:20.050Z,1520556380.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:20.438Z,1520556380.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:20.844Z,1520556380.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:21.250Z,1520556381.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:21.643Z,1520556381.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:22.044Z,1520556382.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:22.437Z,1520556382.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:22.842Z,1520556382.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:23.242Z,1520556383.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:23.638Z,1520556383.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:24.043Z,1520556384.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:24.442Z,1520556384.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:24.842Z,1520556384.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:25.238Z,1520556385.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:25.632Z,1520556385.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:26.027Z,1520556386.027 [NAL9602](INFO): SBD MO Status=0, MOMSN=4910, MT Status=0, MTMSN=0
2018-03-09T00:46:26.027Z,1520556386.027 [NAL9602](INFO): No messages in MT queue
2018-03-09T00:46:26.044Z,1520556386.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:26.446Z,1520556386.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:26.853Z,1520556386.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:27.257Z,1520556387.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:27.653Z,1520556387.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:28.036Z,1520556388.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:28.442Z,1520556388.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:28.863Z,1520556388.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:29.238Z,1520556389.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:29.657Z,1520556389.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:30.061Z,1520556390.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:30.453Z,1520556390.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:30.838Z,1520556390.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:31.238Z,1520556391.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:31.648Z,1520556391.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:32.054Z,1520556392.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:32.468Z,1520556392.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:32.849Z,1520556392.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:33.263Z,1520556393.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:33.651Z,1520556393.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:34.049Z,1520556394.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:34.446Z,1520556394.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:34.864Z,1520556394.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:35.249Z,1520556395.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:35.681Z,1520556395.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:36.046Z,1520556396.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:36.446Z,1520556396.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:36.848Z,1520556396.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:37.247Z,1520556397.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:37.652Z,1520556397.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:38.030Z,1520556398.030 [NAL9602](INFO): GPS fix at 20180309T004557: (21.315869, -157.877172)
2018-03-09T00:46:38.062Z,1520556398.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:38.109Z,1520556398.109 [Default:CheckIn:Read_GPS] Stopped
2018-03-09T00:46:38.109Z,1520556398.109 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-09T00:46:38.463Z,1520556398.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:38.986Z,1520556398.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:39.238Z,1520556399.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:39.639Z,1520556399.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:42.955Z,1520556402.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:43.074Z,1520556403.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:43.401Z,1520556403.401 [DataOverHttps](INFO): Sending 63 bytes from file Logs/20180308T074127/Courier0412.lzma
2018-03-09T00:46:43.428Z,1520556403.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:43.826Z,1520556403.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:44.200Z,1520556404.200 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0412.lzma.bak
2018-03-09T00:46:44.200Z,1520556404.200 [DataOverHttps](INFO): SBD MOMSN=7990649
2018-03-09T00:46:44.239Z,1520556404.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:44.829Z,1520556404.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:45.027Z,1520556405.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:45.430Z,1520556405.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:48.711Z,1520556408.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:48.846Z,1520556408.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:49.201Z,1520556409.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:49.593Z,1520556409.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:49.998Z,1520556409.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:50.386Z,1520556410.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:50.788Z,1520556410.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:54.022Z,1520556414.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:54.142Z,1520556414.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:54.514Z,1520556414.514 [DataOverHttps](INFO): Sending 134 bytes from file Logs/20180308T074127/Express0413.lzma
2018-03-09T00:46:54.534Z,1520556414.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:54.933Z,1520556414.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:55.321Z,1520556415.321 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0413.lzma.bak
2018-03-09T00:46:55.321Z,1520556415.321 [DataOverHttps](INFO): SBD MOMSN=7990652
2018-03-09T00:46:55.343Z,1520556415.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:55.929Z,1520556415.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:55.949Z,1520556415.949 [Default:CheckIn:Read_Iridium] Stopped
2018-03-09T00:46:55.949Z,1520556415.949 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-09T00:46:55.949Z,1520556415.949 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-09T00:46:56.134Z,1520556416.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:56.534Z,1520556416.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:59.660Z,1520556419.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:46:59.789Z,1520556419.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:00.155Z,1520556420.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:00.546Z,1520556420.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:00.943Z,1520556420.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:01.356Z,1520556421.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:01.734Z,1520556421.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:02.134Z,1520556422.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:02.555Z,1520556422.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:02.951Z,1520556422.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:03.336Z,1520556423.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:03.746Z,1520556423.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:04.151Z,1520556424.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:04.535Z,1520556424.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:04.951Z,1520556424.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:05.350Z,1520556425.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:05.734Z,1520556425.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:06.150Z,1520556426.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:06.550Z,1520556426.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:06.934Z,1520556426.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:07.346Z,1520556427.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:07.734Z,1520556427.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:08.134Z,1520556428.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:08.538Z,1520556428.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:08.942Z,1520556428.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:09.335Z,1520556429.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:09.743Z,1520556429.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:10.145Z,1520556430.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:10.543Z,1520556430.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:10.946Z,1520556430.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:11.342Z,1520556431.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:11.731Z,1520556431.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:12.146Z,1520556432.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:12.546Z,1520556432.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:12.933Z,1520556432.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:13.322Z,1520556433.322 [NAL9602](INFO): Powering down
2018-03-09T00:47:13.360Z,1520556433.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:13.745Z,1520556433.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:14.146Z,1520556434.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:14.546Z,1520556434.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:14.938Z,1520556434.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:15.332Z,1520556435.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:15.744Z,1520556435.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:16.153Z,1520556436.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:16.532Z,1520556436.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:16.949Z,1520556436.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:17.346Z,1520556437.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:17.744Z,1520556437.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:18.146Z,1520556438.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:18.547Z,1520556438.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:18.943Z,1520556438.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:19.351Z,1520556439.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:19.751Z,1520556439.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:20.142Z,1520556440.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:20.546Z,1520556440.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:20.947Z,1520556440.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:21.343Z,1520556441.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:21.754Z,1520556441.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:22.147Z,1520556442.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:22.542Z,1520556442.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:22.955Z,1520556442.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:23.355Z,1520556443.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:23.734Z,1520556443.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:24.138Z,1520556444.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:24.550Z,1520556444.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:24.934Z,1520556444.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:25.350Z,1520556445.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:25.749Z,1520556445.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:26.134Z,1520556446.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:26.538Z,1520556446.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:26.938Z,1520556446.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:27.334Z,1520556447.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:27.739Z,1520556447.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:28.138Z,1520556448.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:28.567Z,1520556448.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:28.938Z,1520556448.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:29.336Z,1520556449.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:29.745Z,1520556449.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:30.154Z,1520556450.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:30.540Z,1520556450.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:30.945Z,1520556450.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:31.343Z,1520556451.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:31.744Z,1520556451.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:32.146Z,1520556452.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:32.545Z,1520556452.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:32.943Z,1520556452.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:33.342Z,1520556453.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:33.751Z,1520556453.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:34.149Z,1520556454.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:34.542Z,1520556454.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:34.946Z,1520556454.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:35.341Z,1520556455.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:35.748Z,1520556455.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:36.146Z,1520556456.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:36.544Z,1520556456.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:36.946Z,1520556456.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:37.355Z,1520556457.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:37.735Z,1520556457.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:38.142Z,1520556458.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:38.538Z,1520556458.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:38.939Z,1520556458.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:39.346Z,1520556459.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:39.747Z,1520556459.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:40.143Z,1520556460.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:40.546Z,1520556460.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:40.946Z,1520556460.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:41.341Z,1520556461.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:41.374Z,1520556461.374 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T00:47:41.374Z,1520556461.374 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-09T00:47:41.374Z,1520556461.374 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T00:47:41.422Z,1520556461.422 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T00:47:41.748Z,1520556461.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:41.823Z,1520556461.823 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T00:47:41.823Z,1520556461.823 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-09T00:47:42.153Z,1520556462.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:42.229Z,1520556462.229 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T00:47:42.229Z,1520556462.229 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T00:47:42.230Z,1520556462.230 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T00:47:42.558Z,1520556462.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:42.940Z,1520556462.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:43.349Z,1520556463.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:43.739Z,1520556463.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:44.142Z,1520556464.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:44.577Z,1520556464.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:44.945Z,1520556464.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:45.346Z,1520556465.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:45.777Z,1520556465.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:46.146Z,1520556466.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:46.578Z,1520556466.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:46.943Z,1520556466.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:47.342Z,1520556467.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:47.745Z,1520556467.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:48.146Z,1520556468.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:48.543Z,1520556468.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:48.947Z,1520556468.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:49.355Z,1520556469.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:49.735Z,1520556469.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:50.159Z,1520556470.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:50.558Z,1520556470.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:50.932Z,1520556470.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:51.338Z,1520556471.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:51.745Z,1520556471.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:52.146Z,1520556472.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:52.546Z,1520556472.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:52.950Z,1520556472.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:53.343Z,1520556473.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:53.767Z,1520556473.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:54.143Z,1520556474.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:54.541Z,1520556474.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:54.938Z,1520556474.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:55.342Z,1520556475.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:55.734Z,1520556475.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:56.138Z,1520556476.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:56.544Z,1520556476.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:59.738Z,1520556479.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:47:59.868Z,1520556479.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:00.230Z,1520556480.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:00.619Z,1520556480.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:01.028Z,1520556481.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:01.425Z,1520556481.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:01.826Z,1520556481.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:02.224Z,1520556482.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:02.635Z,1520556482.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:03.030Z,1520556483.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:03.430Z,1520556483.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:03.835Z,1520556483.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:04.222Z,1520556484.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:04.626Z,1520556484.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:05.024Z,1520556485.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:05.415Z,1520556485.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:05.818Z,1520556485.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:06.218Z,1520556486.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:06.617Z,1520556486.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:07.022Z,1520556487.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:07.418Z,1520556487.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:07.822Z,1520556487.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:08.223Z,1520556488.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:08.634Z,1520556488.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:09.022Z,1520556489.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:09.427Z,1520556489.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:09.827Z,1520556489.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:10.229Z,1520556490.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:10.624Z,1520556490.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:11.035Z,1520556491.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:11.414Z,1520556491.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:11.821Z,1520556491.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:12.218Z,1520556492.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:12.618Z,1520556492.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:13.029Z,1520556493.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:13.418Z,1520556493.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:13.831Z,1520556493.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:14.229Z,1520556494.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:14.619Z,1520556494.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:15.014Z,1520556495.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:15.419Z,1520556495.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:15.818Z,1520556495.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:16.219Z,1520556496.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:16.614Z,1520556496.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:17.018Z,1520556497.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:17.418Z,1520556497.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:17.814Z,1520556497.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:18.218Z,1520556498.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:18.614Z,1520556498.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:19.022Z,1520556499.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:19.419Z,1520556499.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:19.822Z,1520556499.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:20.222Z,1520556500.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:20.618Z,1520556500.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:21.018Z,1520556501.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:21.420Z,1520556501.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:21.823Z,1520556501.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:22.227Z,1520556502.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:22.621Z,1520556502.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:23.033Z,1520556503.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:23.420Z,1520556503.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:23.824Z,1520556503.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:24.234Z,1520556504.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:24.627Z,1520556504.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:25.027Z,1520556505.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:25.432Z,1520556505.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:25.827Z,1520556505.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:26.228Z,1520556506.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:26.622Z,1520556506.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:27.027Z,1520556507.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:27.423Z,1520556507.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:27.821Z,1520556507.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:28.230Z,1520556508.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:28.623Z,1520556508.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:29.035Z,1520556509.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:29.426Z,1520556509.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:29.827Z,1520556509.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:30.225Z,1520556510.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:30.630Z,1520556510.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:31.016Z,1520556511.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:31.437Z,1520556511.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:31.818Z,1520556511.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:32.230Z,1520556512.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:32.618Z,1520556512.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:33.032Z,1520556513.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:33.415Z,1520556513.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:33.818Z,1520556513.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:34.218Z,1520556514.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:34.617Z,1520556514.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:35.022Z,1520556515.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:35.418Z,1520556515.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:35.819Z,1520556515.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:36.222Z,1520556516.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:36.618Z,1520556516.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:37.017Z,1520556517.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:37.418Z,1520556517.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:37.827Z,1520556517.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:38.218Z,1520556518.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:38.625Z,1520556518.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:39.030Z,1520556519.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:39.422Z,1520556519.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:39.829Z,1520556519.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:40.225Z,1520556520.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:40.625Z,1520556520.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:41.027Z,1520556521.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:41.422Z,1520556521.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:41.822Z,1520556521.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:42.230Z,1520556522.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:42.627Z,1520556522.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:43.022Z,1520556523.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:43.427Z,1520556523.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:43.826Z,1520556523.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:44.229Z,1520556524.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:44.636Z,1520556524.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:45.026Z,1520556525.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:45.423Z,1520556525.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:45.835Z,1520556525.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:46.226Z,1520556526.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:46.615Z,1520556526.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:47.029Z,1520556527.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:47.415Z,1520556527.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:47.815Z,1520556527.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:48.218Z,1520556528.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:48.630Z,1520556528.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:49.015Z,1520556529.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:49.419Z,1520556529.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:49.814Z,1520556529.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:50.216Z,1520556530.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:50.618Z,1520556530.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:51.017Z,1520556531.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:51.418Z,1520556531.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:51.838Z,1520556531.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:52.219Z,1520556532.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:52.615Z,1520556532.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:53.018Z,1520556533.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:53.422Z,1520556533.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:53.812Z,1520556533.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:54.220Z,1520556534.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:54.624Z,1520556534.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:55.024Z,1520556535.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:55.423Z,1520556535.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:55.819Z,1520556535.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:56.227Z,1520556536.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:56.627Z,1520556536.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:57.026Z,1520556537.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:57.421Z,1520556537.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:57.827Z,1520556537.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:58.226Z,1520556538.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:58.620Z,1520556538.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:59.031Z,1520556539.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:59.414Z,1520556539.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:48:59.825Z,1520556539.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:03.107Z,1520556543.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:03.279Z,1520556543.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:03.602Z,1520556543.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:03.991Z,1520556543.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:04.397Z,1520556544.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:04.782Z,1520556544.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:05.182Z,1520556545.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:05.584Z,1520556545.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:05.994Z,1520556545.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:06.391Z,1520556546.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:06.792Z,1520556546.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:07.190Z,1520556547.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:07.586Z,1520556547.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:07.986Z,1520556547.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:08.397Z,1520556548.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:08.793Z,1520556548.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:09.188Z,1520556549.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:09.582Z,1520556549.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:09.983Z,1520556549.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:10.379Z,1520556550.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:10.789Z,1520556550.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:11.187Z,1520556551.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:11.582Z,1520556551.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:11.984Z,1520556551.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:12.389Z,1520556552.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:12.786Z,1520556552.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:13.203Z,1520556553.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:13.575Z,1520556553.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:13.993Z,1520556553.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:14.389Z,1520556554.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:14.795Z,1520556554.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:15.198Z,1520556555.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:15.608Z,1520556555.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:15.977Z,1520556555.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:16.399Z,1520556556.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:16.785Z,1520556556.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:17.181Z,1520556557.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:17.582Z,1520556557.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:17.982Z,1520556557.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:18.385Z,1520556558.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:18.789Z,1520556558.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:19.194Z,1520556559.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:19.582Z,1520556559.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:19.993Z,1520556559.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:20.394Z,1520556560.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:20.783Z,1520556560.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:21.194Z,1520556561.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:21.593Z,1520556561.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:21.978Z,1520556561.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:22.394Z,1520556562.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:22.786Z,1520556562.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:23.179Z,1520556563.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:23.603Z,1520556563.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:23.985Z,1520556563.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:24.395Z,1520556564.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:24.784Z,1520556564.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:25.192Z,1520556565.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:25.583Z,1520556565.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:25.988Z,1520556565.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:26.394Z,1520556566.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:26.789Z,1520556566.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:27.191Z,1520556567.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:27.591Z,1520556567.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:27.988Z,1520556567.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:28.389Z,1520556568.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:28.794Z,1520556568.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:29.197Z,1520556569.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:29.597Z,1520556569.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:29.993Z,1520556569.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:30.387Z,1520556570.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:30.785Z,1520556570.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:31.201Z,1520556571.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:31.589Z,1520556571.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:31.994Z,1520556571.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:32.395Z,1520556572.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:32.792Z,1520556572.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:33.192Z,1520556573.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:33.582Z,1520556573.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:33.986Z,1520556573.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:34.388Z,1520556574.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:34.784Z,1520556574.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:35.186Z,1520556575.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:35.585Z,1520556575.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:35.987Z,1520556575.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:36.385Z,1520556576.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:36.778Z,1520556576.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:37.207Z,1520556577.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:37.586Z,1520556577.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:37.985Z,1520556577.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:38.394Z,1520556578.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:38.789Z,1520556578.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:39.190Z,1520556579.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:39.599Z,1520556579.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:39.986Z,1520556579.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:40.393Z,1520556580.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:40.790Z,1520556580.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:41.189Z,1520556581.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:41.577Z,1520556581.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:41.998Z,1520556581.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:42.379Z,1520556582.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:42.801Z,1520556582.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:43.219Z,1520556583.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:43.584Z,1520556583.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:43.983Z,1520556583.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:44.396Z,1520556584.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:44.790Z,1520556584.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:45.189Z,1520556585.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:45.593Z,1520556585.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:46.016Z,1520556586.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:46.386Z,1520556586.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:46.798Z,1520556586.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:47.193Z,1520556587.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:47.591Z,1520556587.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:47.983Z,1520556587.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:48.386Z,1520556588.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:48.783Z,1520556588.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:49.193Z,1520556589.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:49.590Z,1520556589.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:49.982Z,1520556589.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:50.387Z,1520556590.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:50.781Z,1520556590.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:51.178Z,1520556591.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:51.582Z,1520556591.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:51.984Z,1520556591.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:52.392Z,1520556592.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:52.789Z,1520556592.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:53.186Z,1520556593.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:53.592Z,1520556593.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:54.002Z,1520556594.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:54.386Z,1520556594.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:54.779Z,1520556594.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:55.184Z,1520556595.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:55.585Z,1520556595.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:55.979Z,1520556595.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:56.382Z,1520556596.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:49:56.789Z,1520556596.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:00.212Z,1520556600.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:00.337Z,1520556600.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:00.688Z,1520556600.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:01.106Z,1520556601.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:01.478Z,1520556601.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:01.878Z,1520556601.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:02.277Z,1520556602.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:02.677Z,1520556602.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:03.077Z,1520556603.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:03.482Z,1520556603.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:03.883Z,1520556603.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:04.284Z,1520556604.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:04.680Z,1520556604.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:05.098Z,1520556605.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:05.479Z,1520556605.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:05.879Z,1520556605.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:06.275Z,1520556606.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:06.679Z,1520556606.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:07.081Z,1520556607.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:07.489Z,1520556607.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:07.883Z,1520556607.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:08.281Z,1520556608.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:08.682Z,1520556608.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:09.085Z,1520556609.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:09.484Z,1520556609.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:09.881Z,1520556609.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:10.285Z,1520556610.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:10.684Z,1520556610.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:11.086Z,1520556611.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:11.487Z,1520556611.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:11.886Z,1520556611.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:12.290Z,1520556612.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:12.687Z,1520556612.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:13.086Z,1520556613.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:13.488Z,1520556613.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:13.886Z,1520556613.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:14.282Z,1520556614.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:14.690Z,1520556614.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:15.086Z,1520556615.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:15.483Z,1520556615.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:15.886Z,1520556615.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:16.287Z,1520556616.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:16.683Z,1520556616.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:17.086Z,1520556617.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:17.490Z,1520556617.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:17.883Z,1520556617.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:18.287Z,1520556618.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:18.686Z,1520556618.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:19.090Z,1520556619.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:19.486Z,1520556619.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:19.886Z,1520556619.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:20.290Z,1520556620.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:20.686Z,1520556620.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:21.095Z,1520556621.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:21.482Z,1520556621.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:21.886Z,1520556621.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:22.286Z,1520556622.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:22.683Z,1520556622.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:23.086Z,1520556623.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:23.490Z,1520556623.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:23.884Z,1520556623.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:24.286Z,1520556624.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:24.686Z,1520556624.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:25.086Z,1520556625.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:25.486Z,1520556625.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:25.890Z,1520556625.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:26.285Z,1520556626.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:26.685Z,1520556626.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:27.093Z,1520556627.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:27.481Z,1520556627.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:27.885Z,1520556627.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:28.286Z,1520556628.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:28.686Z,1520556628.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:29.090Z,1520556629.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:29.481Z,1520556629.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:29.874Z,1520556629.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:30.290Z,1520556630.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:30.681Z,1520556630.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:31.086Z,1520556631.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:31.485Z,1520556631.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:31.881Z,1520556631.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:32.287Z,1520556632.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:32.692Z,1520556632.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:33.087Z,1520556633.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:33.486Z,1520556633.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:33.881Z,1520556633.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:34.277Z,1520556634.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:34.678Z,1520556634.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:35.078Z,1520556635.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:35.478Z,1520556635.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:35.875Z,1520556635.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:36.294Z,1520556636.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:36.678Z,1520556636.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:37.078Z,1520556637.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:37.479Z,1520556637.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:37.878Z,1520556637.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:38.278Z,1520556638.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:38.681Z,1520556638.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:39.076Z,1520556639.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:39.476Z,1520556639.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:39.878Z,1520556639.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:40.281Z,1520556640.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:40.696Z,1520556640.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:41.089Z,1520556641.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:41.487Z,1520556641.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:41.888Z,1520556641.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:42.291Z,1520556642.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:42.310Z,1520556642.310 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T00:50:42.310Z,1520556642.310 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-09T00:50:42.310Z,1520556642.310 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T00:50:42.335Z,1520556642.335 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T00:50:42.691Z,1520556642.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:42.745Z,1520556642.745 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T00:50:42.745Z,1520556642.745 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-09T00:50:43.087Z,1520556643.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:43.105Z,1520556643.105 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T00:50:43.105Z,1520556643.105 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T00:50:43.105Z,1520556643.105 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T00:50:43.478Z,1520556643.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:43.899Z,1520556643.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:44.282Z,1520556644.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:44.673Z,1520556644.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:45.079Z,1520556645.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:45.483Z,1520556645.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:45.879Z,1520556645.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:46.283Z,1520556646.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:46.684Z,1520556646.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:47.085Z,1520556647.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:47.484Z,1520556647.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:47.886Z,1520556647.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:48.286Z,1520556648.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:48.688Z,1520556648.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:49.083Z,1520556649.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:49.484Z,1520556649.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:49.885Z,1520556649.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:50.283Z,1520556650.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:50.683Z,1520556650.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:51.092Z,1520556651.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:51.483Z,1520556651.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:51.885Z,1520556651.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:52.281Z,1520556652.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:52.686Z,1520556652.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:53.090Z,1520556653.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:53.486Z,1520556653.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:53.886Z,1520556653.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:54.274Z,1520556654.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:54.678Z,1520556654.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:55.078Z,1520556655.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:55.474Z,1520556655.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:55.882Z,1520556655.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:56.274Z,1520556656.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:56.674Z,1520556656.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:50:57.078Z,1520556657.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:00.309Z,1520556660.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:00.424Z,1520556660.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:00.819Z,1520556660.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:01.223Z,1520556661.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:01.626Z,1520556661.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:02.028Z,1520556662.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:02.419Z,1520556662.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:02.810Z,1520556662.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:03.213Z,1520556663.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:03.612Z,1520556663.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:04.011Z,1520556664.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:04.422Z,1520556664.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:04.824Z,1520556664.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:05.218Z,1520556665.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:05.625Z,1520556665.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:06.021Z,1520556666.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:06.416Z,1520556666.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:06.812Z,1520556666.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:07.215Z,1520556667.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:07.611Z,1520556667.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:08.020Z,1520556668.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:08.419Z,1520556668.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:08.817Z,1520556668.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:09.213Z,1520556669.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:09.609Z,1520556669.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:10.009Z,1520556670.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:10.426Z,1520556670.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:10.816Z,1520556670.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:11.226Z,1520556671.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:11.613Z,1520556671.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:12.018Z,1520556672.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:12.414Z,1520556672.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:12.820Z,1520556672.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:13.222Z,1520556673.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:13.618Z,1520556673.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:14.017Z,1520556674.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:14.412Z,1520556674.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:14.809Z,1520556674.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:15.215Z,1520556675.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:15.623Z,1520556675.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:16.010Z,1520556676.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:16.412Z,1520556676.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:16.814Z,1520556676.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:17.210Z,1520556677.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:17.618Z,1520556677.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:18.018Z,1520556678.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:18.418Z,1520556678.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:18.817Z,1520556678.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:19.223Z,1520556679.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:19.617Z,1520556679.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:20.022Z,1520556680.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:20.419Z,1520556680.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:20.818Z,1520556680.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:21.219Z,1520556681.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:21.610Z,1520556681.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:22.008Z,1520556682.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:22.414Z,1520556682.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:22.817Z,1520556682.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:23.219Z,1520556683.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:23.619Z,1520556683.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:24.013Z,1520556684.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:24.420Z,1520556684.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:24.826Z,1520556684.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:25.217Z,1520556685.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:25.618Z,1520556685.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:26.012Z,1520556686.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:26.410Z,1520556686.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:26.807Z,1520556686.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:27.225Z,1520556687.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:27.612Z,1520556687.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:28.007Z,1520556688.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:28.419Z,1520556688.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:28.822Z,1520556688.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:29.220Z,1520556689.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:29.626Z,1520556689.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:30.022Z,1520556690.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:30.409Z,1520556690.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:30.815Z,1520556690.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:31.214Z,1520556691.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:31.612Z,1520556691.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:32.025Z,1520556692.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:32.420Z,1520556692.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:32.818Z,1520556692.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:33.224Z,1520556693.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:33.618Z,1520556693.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:34.019Z,1520556694.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:34.428Z,1520556694.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:34.810Z,1520556694.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:35.210Z,1520556695.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:35.612Z,1520556695.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:36.010Z,1520556696.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:36.409Z,1520556696.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:36.823Z,1520556696.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:37.218Z,1520556697.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:37.615Z,1520556697.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:38.018Z,1520556698.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:38.418Z,1520556698.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:38.815Z,1520556698.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:39.226Z,1520556699.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:39.618Z,1520556699.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:40.010Z,1520556700.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:40.430Z,1520556700.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:40.810Z,1520556700.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:41.210Z,1520556701.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:41.637Z,1520556701.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:42.012Z,1520556702.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:42.412Z,1520556702.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:42.817Z,1520556702.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:43.224Z,1520556703.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:43.622Z,1520556703.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:44.018Z,1520556704.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:44.435Z,1520556704.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:44.821Z,1520556704.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:45.229Z,1520556705.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:45.622Z,1520556705.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:46.010Z,1520556706.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:46.425Z,1520556706.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:46.824Z,1520556706.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:47.222Z,1520556707.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:47.618Z,1520556707.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:48.018Z,1520556708.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:48.421Z,1520556708.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:48.823Z,1520556708.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:49.217Z,1520556709.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:49.618Z,1520556709.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:50.030Z,1520556710.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:50.410Z,1520556710.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:50.807Z,1520556710.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:51.224Z,1520556711.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:51.621Z,1520556711.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:52.061Z,1520556712.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:52.418Z,1520556712.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:52.854Z,1520556712.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:53.224Z,1520556713.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:53.625Z,1520556713.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:54.013Z,1520556714.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:54.417Z,1520556714.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:54.820Z,1520556714.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:55.222Z,1520556715.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:55.607Z,1520556715.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:56.012Z,1520556716.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:56.423Z,1520556716.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:56.448Z,1520556716.448 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-09T00:51:56.448Z,1520556716.448 [Default:CheckIn:C.Wait] Stopped
2018-03-09T00:51:56.448Z,1520556716.448 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-09T00:51:56.448Z,1520556716.448 [Default:CheckIn:D] Running Loop=1
2018-03-09T00:51:56.809Z,1520556716.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:56.841Z,1520556716.841 [Default:CheckIn:D] Stopped
2018-03-09T00:51:56.841Z,1520556716.841 [Default:CheckIn:E] Running Loop=1
2018-03-09T00:51:57.221Z,1520556717.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:51:57.268Z,1520556717.268 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1026.200586 min 
2018-03-09T00:51:57.268Z,1520556717.268 [Default:CheckIn:E] Stopped
2018-03-09T00:51:57.268Z,1520556717.268 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-09T00:51:57.268Z,1520556717.268 [Default:CheckIn] Stopped
2018-03-09T00:51:57.285Z,1520556717.285 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-09T00:51:57.285Z,1520556717.285 [Default:CheckIn](INFO): Running loop #104
2018-03-09T00:51:57.285Z,1520556717.285 [Default:CheckIn] Running Loop=104
2018-03-09T00:51:57.285Z,1520556717.285 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-09T00:51:57.285Z,1520556717.285 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-09T00:52:00.439Z,1520556720.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:00.548Z,1520556720.548 [NAL9602](INFO): Powering up
2018-03-09T00:52:00.565Z,1520556720.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:00.927Z,1520556720.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:01.327Z,1520556721.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:01.722Z,1520556721.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:02.122Z,1520556722.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:02.539Z,1520556722.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:02.920Z,1520556722.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:03.334Z,1520556723.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:03.723Z,1520556723.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:04.127Z,1520556724.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:04.527Z,1520556724.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:04.930Z,1520556724.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:05.332Z,1520556725.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:05.726Z,1520556725.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:06.128Z,1520556726.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:06.524Z,1520556726.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:06.926Z,1520556726.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:06.955Z,1520556726.955 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-09T00:52:07.325Z,1520556727.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:07.723Z,1520556727.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:08.127Z,1520556728.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:08.526Z,1520556728.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:08.926Z,1520556728.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:09.326Z,1520556729.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:09.726Z,1520556729.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:10.146Z,1520556730.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:10.526Z,1520556730.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:10.927Z,1520556730.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:11.357Z,1520556731.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:11.702Z,1520556731.702 [NAL9602](INFO): NAL9602 initialized
2018-03-09T00:52:11.730Z,1520556731.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:12.118Z,1520556732.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:12.538Z,1520556732.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:12.946Z,1520556732.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:13.338Z,1520556733.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:13.718Z,1520556733.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:14.122Z,1520556734.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:14.518Z,1520556734.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:14.915Z,1520556734.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:15.341Z,1520556735.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:15.718Z,1520556735.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:16.114Z,1520556736.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:16.522Z,1520556736.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:16.918Z,1520556736.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:17.322Z,1520556737.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:17.731Z,1520556737.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:18.130Z,1520556738.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:18.553Z,1520556738.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:18.927Z,1520556738.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:19.322Z,1520556739.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:19.737Z,1520556739.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:20.131Z,1520556740.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:20.528Z,1520556740.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:20.934Z,1520556740.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:21.329Z,1520556741.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:21.732Z,1520556741.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:22.128Z,1520556742.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:22.527Z,1520556742.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:22.927Z,1520556742.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:23.324Z,1520556743.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:23.737Z,1520556743.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:24.133Z,1520556744.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:24.533Z,1520556744.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:24.935Z,1520556744.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:25.339Z,1520556745.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:25.719Z,1520556745.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:26.124Z,1520556746.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:26.543Z,1520556746.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:26.940Z,1520556746.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:27.318Z,1520556747.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:27.726Z,1520556747.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:28.153Z,1520556748.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:28.542Z,1520556748.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:28.942Z,1520556748.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:29.343Z,1520556749.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:29.719Z,1520556749.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:30.118Z,1520556750.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:30.524Z,1520556750.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:30.926Z,1520556750.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:31.324Z,1520556751.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:31.726Z,1520556751.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:32.126Z,1520556752.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:32.560Z,1520556752.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:32.941Z,1520556752.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:33.345Z,1520556753.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:33.745Z,1520556753.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:34.133Z,1520556754.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:34.533Z,1520556754.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:34.934Z,1520556754.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:35.332Z,1520556755.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:35.730Z,1520556755.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:36.127Z,1520556756.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:36.514Z,1520556756.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:36.925Z,1520556756.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:37.330Z,1520556757.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:37.718Z,1520556757.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:38.135Z,1520556758.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:38.540Z,1520556758.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:38.947Z,1520556758.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:39.337Z,1520556759.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:39.718Z,1520556759.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:40.127Z,1520556760.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:40.523Z,1520556760.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:40.924Z,1520556760.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:41.320Z,1520556761.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:41.729Z,1520556761.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:42.131Z,1520556762.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:42.528Z,1520556762.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:42.928Z,1520556762.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:43.333Z,1520556763.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:43.737Z,1520556763.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:44.137Z,1520556764.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:44.533Z,1520556764.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:44.932Z,1520556764.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:45.325Z,1520556765.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:45.726Z,1520556765.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:46.127Z,1520556766.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:46.532Z,1520556766.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:46.930Z,1520556766.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:47.343Z,1520556767.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:47.736Z,1520556767.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:48.118Z,1520556768.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:48.547Z,1520556768.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:48.938Z,1520556768.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:49.325Z,1520556769.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:49.742Z,1520556769.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:50.118Z,1520556770.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:50.514Z,1520556770.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:50.922Z,1520556770.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:51.318Z,1520556771.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:51.718Z,1520556771.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:52.122Z,1520556772.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:52.518Z,1520556772.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:52.914Z,1520556772.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:53.323Z,1520556773.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:53.737Z,1520556773.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:54.148Z,1520556774.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:54.553Z,1520556774.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:54.946Z,1520556774.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:55.331Z,1520556775.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:55.731Z,1520556775.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:56.125Z,1520556776.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:56.527Z,1520556776.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:56.925Z,1520556776.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:52:57.322Z,1520556777.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:00.516Z,1520556780.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:00.649Z,1520556780.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:01.002Z,1520556781.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:01.406Z,1520556781.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:01.783Z,1520556781.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:02.194Z,1520556782.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:02.587Z,1520556782.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:02.977Z,1520556782.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:03.390Z,1520556783.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:03.792Z,1520556783.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:04.191Z,1520556784.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:04.586Z,1520556784.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:04.988Z,1520556784.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:05.392Z,1520556785.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:05.801Z,1520556785.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:06.203Z,1520556786.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:06.596Z,1520556786.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:07.003Z,1520556787.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:07.379Z,1520556787.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:07.779Z,1520556787.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:08.202Z,1520556788.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:08.578Z,1520556788.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:08.976Z,1520556788.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:09.378Z,1520556789.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:09.774Z,1520556789.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:10.183Z,1520556790.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:10.597Z,1520556790.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:11.006Z,1520556791.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:11.397Z,1520556791.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:11.793Z,1520556791.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:12.179Z,1520556792.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:12.574Z,1520556792.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:12.979Z,1520556792.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:13.374Z,1520556793.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:13.779Z,1520556793.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:14.187Z,1520556794.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:14.598Z,1520556794.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:14.982Z,1520556794.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:15.383Z,1520556795.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:15.801Z,1520556795.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:16.197Z,1520556796.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:16.601Z,1520556796.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:17.005Z,1520556797.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:17.383Z,1520556797.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:17.788Z,1520556797.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:18.183Z,1520556798.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:18.583Z,1520556798.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:18.986Z,1520556798.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:19.386Z,1520556799.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:19.786Z,1520556799.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:20.191Z,1520556800.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:20.588Z,1520556800.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:20.993Z,1520556800.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:21.405Z,1520556801.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:21.809Z,1520556801.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:22.194Z,1520556802.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:22.591Z,1520556802.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:22.987Z,1520556802.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:23.384Z,1520556803.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:23.795Z,1520556803.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:24.187Z,1520556804.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:24.572Z,1520556804.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:24.981Z,1520556804.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:25.391Z,1520556805.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:25.776Z,1520556805.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:26.197Z,1520556806.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:26.593Z,1520556806.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:26.991Z,1520556806.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:27.401Z,1520556807.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:27.774Z,1520556807.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:28.179Z,1520556808.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:28.599Z,1520556808.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:28.978Z,1520556808.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:29.379Z,1520556809.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:29.816Z,1520556809.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:30.178Z,1520556810.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:30.576Z,1520556810.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:30.978Z,1520556810.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:31.389Z,1520556811.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:31.797Z,1520556811.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:32.206Z,1520556812.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:32.598Z,1520556812.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:32.976Z,1520556812.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:33.382Z,1520556813.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:33.779Z,1520556813.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:34.189Z,1520556814.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:34.588Z,1520556814.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:34.982Z,1520556814.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:35.383Z,1520556815.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:35.785Z,1520556815.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:36.188Z,1520556816.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:36.597Z,1520556816.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:36.997Z,1520556816.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:37.402Z,1520556817.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:37.798Z,1520556817.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:38.179Z,1520556818.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:38.578Z,1520556818.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:38.977Z,1520556818.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:39.383Z,1520556819.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:39.779Z,1520556819.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:40.183Z,1520556820.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:40.579Z,1520556820.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:40.998Z,1520556820.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:41.378Z,1520556821.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:41.800Z,1520556821.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:42.215Z,1520556822.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:42.591Z,1520556822.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:42.999Z,1520556822.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:43.378Z,1520556823.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:43.427Z,1520556823.427 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T00:53:43.428Z,1520556823.428 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-03-09T00:53:43.428Z,1520556823.428 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T00:53:43.440Z,1520556823.440 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T00:53:43.776Z,1520556823.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:43.823Z,1520556823.823 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T00:53:43.823Z,1520556823.823 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-03-09T00:53:44.199Z,1520556824.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:44.226Z,1520556824.226 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T00:53:44.227Z,1520556824.227 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T00:53:44.227Z,1520556824.227 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T00:53:44.588Z,1520556824.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:44.985Z,1520556824.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:45.402Z,1520556825.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:45.778Z,1520556825.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:46.218Z,1520556826.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:46.600Z,1520556826.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:47.002Z,1520556827.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:47.393Z,1520556827.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:47.809Z,1520556827.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:48.198Z,1520556828.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:48.579Z,1520556828.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:48.978Z,1520556828.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:49.374Z,1520556829.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:49.776Z,1520556829.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:50.179Z,1520556830.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:50.578Z,1520556830.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:50.983Z,1520556830.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:51.386Z,1520556831.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:51.787Z,1520556831.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:52.201Z,1520556832.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:52.592Z,1520556832.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:52.997Z,1520556832.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:53.393Z,1520556833.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:53.781Z,1520556833.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:54.191Z,1520556834.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:54.587Z,1520556834.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:54.985Z,1520556834.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:55.396Z,1520556835.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:55.776Z,1520556835.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:56.191Z,1520556836.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:56.599Z,1520556836.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:56.977Z,1520556836.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:53:57.401Z,1520556837.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:00.557Z,1520556840.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:00.681Z,1520556840.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:01.073Z,1520556841.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:01.463Z,1520556841.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:01.857Z,1520556841.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:02.264Z,1520556842.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:02.663Z,1520556842.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:03.057Z,1520556843.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:03.461Z,1520556843.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:03.863Z,1520556843.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:04.267Z,1520556844.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:04.661Z,1520556844.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:05.064Z,1520556845.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:05.468Z,1520556845.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:05.872Z,1520556845.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:06.277Z,1520556846.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:06.668Z,1520556846.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:07.070Z,1520556847.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:07.455Z,1520556847.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:07.852Z,1520556847.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:08.254Z,1520556848.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:08.655Z,1520556848.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:09.054Z,1520556849.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:09.454Z,1520556849.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:09.855Z,1520556849.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:10.254Z,1520556850.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:10.673Z,1520556850.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:11.078Z,1520556851.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:11.471Z,1520556851.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:11.873Z,1520556851.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:12.254Z,1520556852.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:12.654Z,1520556852.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:13.055Z,1520556853.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:13.454Z,1520556853.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:13.854Z,1520556853.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:14.254Z,1520556854.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:14.654Z,1520556854.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:15.054Z,1520556855.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:15.453Z,1520556855.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:15.878Z,1520556855.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:16.273Z,1520556856.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:16.677Z,1520556856.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:17.073Z,1520556857.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:17.454Z,1520556857.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:17.855Z,1520556857.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:18.254Z,1520556858.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:18.658Z,1520556858.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:19.054Z,1520556859.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:19.461Z,1520556859.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:19.863Z,1520556859.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:20.262Z,1520556860.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:20.662Z,1520556860.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:21.066Z,1520556861.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:21.470Z,1520556861.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:21.874Z,1520556861.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:22.274Z,1520556862.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:22.677Z,1520556862.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:23.052Z,1520556863.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:23.456Z,1520556863.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:23.854Z,1520556863.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:24.258Z,1520556864.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:24.671Z,1520556864.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:25.057Z,1520556865.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:25.456Z,1520556865.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:25.855Z,1520556865.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:26.269Z,1520556866.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:26.667Z,1520556866.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:27.066Z,1520556867.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:27.479Z,1520556867.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:27.854Z,1520556867.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:28.254Z,1520556868.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:28.666Z,1520556868.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:29.054Z,1520556869.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:29.459Z,1520556869.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:29.859Z,1520556869.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:30.259Z,1520556870.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:30.659Z,1520556870.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:31.070Z,1520556871.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:31.469Z,1520556871.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:31.873Z,1520556871.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:32.276Z,1520556872.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:32.672Z,1520556872.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:33.062Z,1520556873.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:33.471Z,1520556873.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:33.861Z,1520556873.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:34.267Z,1520556874.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:34.674Z,1520556874.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:35.054Z,1520556875.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:35.454Z,1520556875.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:35.858Z,1520556875.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:36.255Z,1520556876.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:36.674Z,1520556876.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:37.084Z,1520556877.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:37.478Z,1520556877.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:37.885Z,1520556877.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:38.254Z,1520556878.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:38.654Z,1520556878.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:39.066Z,1520556879.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:39.462Z,1520556879.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:39.854Z,1520556879.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:40.258Z,1520556880.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:40.662Z,1520556880.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:41.055Z,1520556881.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:41.458Z,1520556881.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:41.882Z,1520556881.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:42.265Z,1520556882.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:42.683Z,1520556882.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:43.083Z,1520556883.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:43.461Z,1520556883.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:43.862Z,1520556883.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:44.262Z,1520556884.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:44.661Z,1520556884.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:45.062Z,1520556885.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:45.454Z,1520556885.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:45.861Z,1520556885.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:46.258Z,1520556886.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:46.668Z,1520556886.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:47.073Z,1520556887.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:47.473Z,1520556887.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:47.877Z,1520556887.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:48.274Z,1520556888.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:48.667Z,1520556888.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:49.074Z,1520556889.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:49.454Z,1520556889.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:49.866Z,1520556889.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:50.254Z,1520556890.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:50.676Z,1520556890.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:51.074Z,1520556891.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:51.454Z,1520556891.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:51.854Z,1520556891.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:52.277Z,1520556892.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:52.684Z,1520556892.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:53.078Z,1520556893.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:53.477Z,1520556893.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:53.870Z,1520556893.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:54.254Z,1520556894.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:54.672Z,1520556894.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:55.058Z,1520556895.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:55.457Z,1520556895.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:55.853Z,1520556895.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:56.258Z,1520556896.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:56.651Z,1520556896.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:57.055Z,1520556897.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:54:57.479Z,1520556897.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:00.732Z,1520556900.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:00.865Z,1520556900.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:01.243Z,1520556901.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:01.630Z,1520556901.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:02.035Z,1520556902.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:02.418Z,1520556902.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:02.814Z,1520556902.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:03.217Z,1520556903.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:03.618Z,1520556903.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:04.023Z,1520556904.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:04.426Z,1520556904.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:04.827Z,1520556904.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:05.233Z,1520556905.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:05.640Z,1520556905.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:06.029Z,1520556906.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:06.444Z,1520556906.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:06.826Z,1520556906.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:07.226Z,1520556907.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:07.619Z,1520556907.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:08.024Z,1520556908.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:08.422Z,1520556908.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:08.823Z,1520556908.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:09.220Z,1520556909.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:09.629Z,1520556909.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:10.016Z,1520556910.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:10.437Z,1520556910.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:10.834Z,1520556910.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:11.245Z,1520556911.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:11.633Z,1520556911.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:12.022Z,1520556912.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:12.425Z,1520556912.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:12.815Z,1520556912.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:13.224Z,1520556913.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:13.626Z,1520556913.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:14.018Z,1520556914.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:14.427Z,1520556914.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:14.823Z,1520556914.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:15.225Z,1520556915.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:15.636Z,1520556915.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:16.034Z,1520556916.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:16.431Z,1520556916.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:16.841Z,1520556916.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:17.214Z,1520556917.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:17.616Z,1520556917.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:18.035Z,1520556918.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:18.431Z,1520556918.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:18.812Z,1520556918.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:19.217Z,1520556919.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:19.616Z,1520556919.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:20.015Z,1520556920.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:20.420Z,1520556920.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:20.829Z,1520556920.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:21.238Z,1520556921.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:21.640Z,1520556921.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:22.033Z,1520556922.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:22.418Z,1520556922.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:22.822Z,1520556922.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:23.222Z,1520556923.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:23.611Z,1520556923.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:24.023Z,1520556924.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:24.422Z,1520556924.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:24.817Z,1520556924.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:25.218Z,1520556925.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:25.626Z,1520556925.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:26.031Z,1520556926.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:26.441Z,1520556926.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:26.839Z,1520556926.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:27.226Z,1520556927.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:27.625Z,1520556927.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:28.020Z,1520556928.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:28.418Z,1520556928.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:28.826Z,1520556928.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:29.221Z,1520556929.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:29.613Z,1520556929.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:30.022Z,1520556930.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:30.422Z,1520556930.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:30.823Z,1520556930.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:31.237Z,1520556931.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:31.633Z,1520556931.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:32.025Z,1520556932.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:32.433Z,1520556932.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:32.820Z,1520556932.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:33.220Z,1520556933.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:33.625Z,1520556933.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:34.024Z,1520556934.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:34.417Z,1520556934.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:34.815Z,1520556934.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:35.230Z,1520556935.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:35.615Z,1520556935.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:36.020Z,1520556936.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:36.429Z,1520556936.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:36.826Z,1520556936.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:37.229Z,1520556937.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:37.633Z,1520556937.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:38.012Z,1520556938.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:38.424Z,1520556938.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:38.825Z,1520556938.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:39.233Z,1520556939.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:39.622Z,1520556939.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:40.026Z,1520556940.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:40.413Z,1520556940.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:40.830Z,1520556940.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:41.227Z,1520556941.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:41.630Z,1520556941.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:42.049Z,1520556942.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:42.453Z,1520556942.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:42.839Z,1520556942.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:43.235Z,1520556943.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:43.627Z,1520556943.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:44.016Z,1520556944.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:44.415Z,1520556944.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:44.817Z,1520556944.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:45.254Z,1520556945.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:45.616Z,1520556945.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:46.039Z,1520556946.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:46.420Z,1520556946.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:46.837Z,1520556946.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:47.241Z,1520556947.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:47.621Z,1520556947.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:48.041Z,1520556948.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:48.423Z,1520556948.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:48.819Z,1520556948.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:49.227Z,1520556949.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:49.627Z,1520556949.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:50.020Z,1520556950.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:50.427Z,1520556950.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:50.823Z,1520556950.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:51.222Z,1520556951.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:51.622Z,1520556951.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:52.033Z,1520556952.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:52.438Z,1520556952.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:52.833Z,1520556952.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:53.233Z,1520556953.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:53.612Z,1520556953.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:54.021Z,1520556954.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:54.427Z,1520556954.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:54.815Z,1520556954.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:55.224Z,1520556955.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:55.623Z,1520556955.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:56.017Z,1520556956.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:56.426Z,1520556956.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:56.814Z,1520556956.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:57.231Z,1520556957.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:55:57.633Z,1520556957.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:00.765Z,1520556960.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:00.953Z,1520556960.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:01.266Z,1520556961.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:01.659Z,1520556961.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:02.055Z,1520556962.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:02.485Z,1520556962.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:02.898Z,1520556962.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:03.293Z,1520556963.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:03.704Z,1520556963.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:04.062Z,1520556964.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:04.466Z,1520556964.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:04.885Z,1520556964.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:05.263Z,1520556965.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:05.659Z,1520556965.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:06.064Z,1520556966.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:06.467Z,1520556966.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:06.864Z,1520556966.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:07.275Z,1520556967.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:07.680Z,1520556967.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:08.072Z,1520556968.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:08.515Z,1520556968.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:08.880Z,1520556968.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:09.254Z,1520556969.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:09.662Z,1520556969.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:10.062Z,1520556970.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:10.462Z,1520556970.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:10.858Z,1520556970.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:11.267Z,1520556971.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:11.663Z,1520556971.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:12.067Z,1520556972.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:12.466Z,1520556972.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:12.881Z,1520556972.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:13.280Z,1520556973.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:13.690Z,1520556973.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:14.086Z,1520556974.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:14.475Z,1520556974.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:14.858Z,1520556974.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:15.271Z,1520556975.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:15.658Z,1520556975.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:16.070Z,1520556976.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:16.498Z,1520556976.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:16.858Z,1520556976.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:17.259Z,1520556977.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:17.656Z,1520556977.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:18.097Z,1520556978.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:18.479Z,1520556978.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:18.885Z,1520556978.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:19.275Z,1520556979.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:19.667Z,1520556979.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:20.062Z,1520556980.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:20.464Z,1520556980.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:20.879Z,1520556980.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:21.275Z,1520556981.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:21.679Z,1520556981.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:22.058Z,1520556982.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:22.462Z,1520556982.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:22.858Z,1520556982.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:23.288Z,1520556983.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:23.665Z,1520556983.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:24.070Z,1520556984.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:24.501Z,1520556984.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:24.856Z,1520556984.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:25.266Z,1520556985.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:25.666Z,1520556985.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:26.062Z,1520556986.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:26.467Z,1520556986.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:26.863Z,1520556986.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:27.260Z,1520556987.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:27.683Z,1520556987.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:28.059Z,1520556988.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:28.483Z,1520556988.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:28.894Z,1520556988.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:29.277Z,1520556989.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:29.681Z,1520556989.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:30.079Z,1520556990.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:30.459Z,1520556990.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:30.858Z,1520556990.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:31.258Z,1520556991.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:31.666Z,1520556991.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:32.066Z,1520556992.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:32.463Z,1520556992.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:32.863Z,1520556992.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:33.267Z,1520556993.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:33.706Z,1520556993.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:34.104Z,1520556994.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:34.495Z,1520556994.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:34.888Z,1520556994.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:35.261Z,1520556995.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:35.680Z,1520556995.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:36.065Z,1520556996.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:36.468Z,1520556996.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:36.866Z,1520556996.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:37.279Z,1520556997.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:37.673Z,1520556997.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:38.054Z,1520556998.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:38.473Z,1520556998.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:38.910Z,1520556998.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:39.273Z,1520556999.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:39.703Z,1520556999.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:40.099Z,1520557000.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:40.461Z,1520557000.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:40.868Z,1520557000.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:41.263Z,1520557001.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:41.668Z,1520557001.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:42.093Z,1520557002.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:42.482Z,1520557002.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:42.880Z,1520557002.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:43.279Z,1520557003.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:43.691Z,1520557003.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:44.091Z,1520557004.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:44.485Z,1520557004.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:44.558Z,1520557004.558 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T00:56:44.558Z,1520557004.558 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-03-09T00:56:44.558Z,1520557004.558 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T00:56:44.595Z,1520557004.595 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T00:56:44.880Z,1520557004.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:44.925Z,1520557004.925 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T00:56:44.925Z,1520557004.925 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-03-09T00:56:45.277Z,1520557005.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:45.307Z,1520557005.307 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T00:56:45.308Z,1520557005.308 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T00:56:45.308Z,1520557005.308 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T00:56:45.661Z,1520557005.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:46.059Z,1520557006.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:46.462Z,1520557006.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:46.863Z,1520557006.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:47.267Z,1520557007.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:47.663Z,1520557007.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:48.064Z,1520557008.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:48.512Z,1520557008.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:48.898Z,1520557008.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:49.305Z,1520557009.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:49.686Z,1520557009.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:50.066Z,1520557010.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:50.474Z,1520557010.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:50.879Z,1520557010.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:51.263Z,1520557011.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:51.667Z,1520557011.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:52.068Z,1520557012.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:52.466Z,1520557012.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:52.867Z,1520557012.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:53.267Z,1520557013.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:53.700Z,1520557013.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:54.088Z,1520557014.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:54.494Z,1520557014.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:54.901Z,1520557014.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:55.262Z,1520557015.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:55.658Z,1520557015.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:56.062Z,1520557016.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:56.458Z,1520557016.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:56.860Z,1520557016.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:57.260Z,1520557017.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:56:57.323Z,1520557017.323 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-09T00:51:57.3Z
2018-03-09T00:56:57.323Z,1520557017.323 [Default:CheckIn:Read_GPS] Stopped
2018-03-09T00:56:57.323Z,1520557017.323 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-09T00:56:57.674Z,1520557017.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:01.055Z,1520557021.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:01.184Z,1520557021.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:01.512Z,1520557021.512 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0416.lzma
2018-03-09T00:57:01.545Z,1520557021.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:01.925Z,1520557021.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:02.296Z,1520557022.296 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0416.lzma.bak
2018-03-09T00:57:02.296Z,1520557022.296 [DataOverHttps](INFO): SBD MOMSN=7990712
2018-03-09T00:57:02.328Z,1520557022.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:02.946Z,1520557022.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:03.126Z,1520557023.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:06.341Z,1520557026.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:06.477Z,1520557026.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:06.861Z,1520557026.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:07.245Z,1520557027.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:07.628Z,1520557027.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:08.031Z,1520557028.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:08.430Z,1520557028.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:11.909Z,1520557031.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:12.041Z,1520557032.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:12.376Z,1520557032.376 [DataOverHttps](INFO): Sending 122 bytes from file Logs/20180308T074127/Express0417.lzma
2018-03-09T00:57:12.426Z,1520557032.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:12.806Z,1520557032.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:13.172Z,1520557033.172 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0417.lzma.bak
2018-03-09T00:57:13.172Z,1520557033.172 [DataOverHttps](INFO): SBD MOMSN=7990714
2018-03-09T00:57:13.213Z,1520557033.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:13.788Z,1520557033.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:13.836Z,1520557033.836 [Default:CheckIn:Read_Iridium] Stopped
2018-03-09T00:57:13.836Z,1520557033.836 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-09T00:57:13.836Z,1520557033.836 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-09T00:57:13.994Z,1520557033.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:14.390Z,1520557034.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:14.797Z,1520557034.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:18.102Z,1520557038.102 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-09T00:57:18.119Z,1520557038.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:18.245Z,1520557038.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:18.605Z,1520557038.605 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-03-09T00:57:18.606Z,1520557038.606 [DropWeight] Hardware Fault, FailCount= 1
2018-03-09T00:57:18.606Z,1520557038.606 [DropWeight](ERROR): Hardware Fault
2018-03-09T00:57:18.629Z,1520557038.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:18.693Z,1520557038.693 [CBIT](INFO): Critical error at 20180309T005718
2018-03-09T00:57:18.696Z,1520557038.696 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-03-09T00:57:18.696Z,1520557038.696 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-03-09T00:57:19.018Z,1520557039.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:19.068Z,1520557039.068 [CBIT](INFO): Critical error at 20180309T005718
2018-03-09T00:57:19.442Z,1520557039.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:19.818Z,1520557039.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:20.222Z,1520557040.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:20.618Z,1520557040.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:21.018Z,1520557041.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:21.434Z,1520557041.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:21.830Z,1520557041.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:22.223Z,1520557042.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:22.638Z,1520557042.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:23.021Z,1520557043.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:23.418Z,1520557043.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:23.819Z,1520557043.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:24.219Z,1520557044.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:24.618Z,1520557044.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:25.015Z,1520557045.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:25.418Z,1520557045.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:25.821Z,1520557045.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:26.222Z,1520557046.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:26.618Z,1520557046.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:27.014Z,1520557047.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:27.414Z,1520557047.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:27.818Z,1520557047.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:28.218Z,1520557048.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:28.611Z,1520557048.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:29.038Z,1520557049.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:29.423Z,1520557049.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:29.815Z,1520557049.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:30.224Z,1520557050.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:30.621Z,1520557050.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:31.023Z,1520557051.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:31.435Z,1520557051.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:31.821Z,1520557051.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:32.226Z,1520557052.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:32.620Z,1520557052.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:33.021Z,1520557053.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:33.421Z,1520557053.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:33.820Z,1520557053.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:34.231Z,1520557054.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:34.623Z,1520557054.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:35.035Z,1520557055.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:35.422Z,1520557055.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:35.826Z,1520557055.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:36.227Z,1520557056.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:36.621Z,1520557056.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:37.021Z,1520557057.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:37.425Z,1520557057.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:37.822Z,1520557057.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:38.229Z,1520557058.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:38.625Z,1520557058.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:39.033Z,1520557059.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:39.423Z,1520557059.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:39.821Z,1520557059.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:40.225Z,1520557060.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:40.626Z,1520557060.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:41.046Z,1520557061.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:41.429Z,1520557061.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:41.814Z,1520557061.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:42.218Z,1520557062.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:42.619Z,1520557062.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:43.018Z,1520557063.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:43.420Z,1520557063.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:43.832Z,1520557063.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:44.224Z,1520557064.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:44.627Z,1520557064.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:45.025Z,1520557065.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:45.436Z,1520557065.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:45.834Z,1520557065.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:46.247Z,1520557066.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:46.611Z,1520557066.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:47.031Z,1520557067.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:47.425Z,1520557067.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:47.823Z,1520557067.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:48.231Z,1520557068.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:48.601Z,1520557068.601 [NAL9602](INFO): Powering down
2018-03-09T00:57:48.624Z,1520557068.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:49.025Z,1520557069.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:49.421Z,1520557069.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:49.825Z,1520557069.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:50.225Z,1520557070.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:50.633Z,1520557070.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:51.025Z,1520557071.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:51.421Z,1520557071.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:51.824Z,1520557071.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:52.225Z,1520557072.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:52.623Z,1520557072.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:53.024Z,1520557073.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:53.430Z,1520557073.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:53.822Z,1520557073.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:54.224Z,1520557074.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:54.621Z,1520557074.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:55.023Z,1520557075.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:55.427Z,1520557075.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:55.825Z,1520557075.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:56.225Z,1520557076.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:56.626Z,1520557076.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:57.022Z,1520557077.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:57.423Z,1520557077.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:57.835Z,1520557077.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:58.224Z,1520557078.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:58.623Z,1520557078.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:59.035Z,1520557079.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:59.421Z,1520557079.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:57:59.822Z,1520557079.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:00.220Z,1520557080.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:00.626Z,1520557080.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:01.024Z,1520557081.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:01.420Z,1520557081.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:01.826Z,1520557081.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:02.227Z,1520557082.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:02.626Z,1520557082.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:03.031Z,1520557083.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:03.427Z,1520557083.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:03.835Z,1520557083.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:04.229Z,1520557084.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:04.614Z,1520557084.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:05.018Z,1520557085.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:05.429Z,1520557085.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:05.811Z,1520557085.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:06.217Z,1520557086.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:06.614Z,1520557086.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:07.011Z,1520557087.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:07.421Z,1520557087.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:07.818Z,1520557087.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:08.222Z,1520557088.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:08.618Z,1520557088.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:09.018Z,1520557089.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:09.418Z,1520557089.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:09.823Z,1520557089.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:10.215Z,1520557090.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:10.618Z,1520557090.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:11.018Z,1520557091.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:11.417Z,1520557091.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:11.818Z,1520557091.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:12.217Z,1520557092.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:12.618Z,1520557092.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:13.015Z,1520557093.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:13.418Z,1520557093.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:13.826Z,1520557093.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:14.221Z,1520557094.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:17.495Z,1520557097.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:17.621Z,1520557097.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:17.968Z,1520557097.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:18.354Z,1520557098.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:18.765Z,1520557098.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:19.174Z,1520557099.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:19.555Z,1520557099.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:19.954Z,1520557099.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:20.370Z,1520557100.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:20.755Z,1520557100.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:21.166Z,1520557101.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:21.566Z,1520557101.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:21.955Z,1520557101.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:22.354Z,1520557102.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:22.792Z,1520557102.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:23.158Z,1520557103.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:23.558Z,1520557103.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:23.977Z,1520557103.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:24.359Z,1520557104.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:24.759Z,1520557104.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:25.166Z,1520557105.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:25.565Z,1520557105.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:25.976Z,1520557105.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:26.359Z,1520557106.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:26.755Z,1520557106.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:27.162Z,1520557107.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:27.562Z,1520557107.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:27.955Z,1520557107.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:28.359Z,1520557108.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:28.755Z,1520557108.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:29.162Z,1520557109.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:29.562Z,1520557109.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:29.958Z,1520557109.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:30.358Z,1520557110.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:30.759Z,1520557110.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:31.174Z,1520557111.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:31.561Z,1520557111.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:31.969Z,1520557111.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:32.377Z,1520557112.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:32.755Z,1520557112.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:33.158Z,1520557113.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:33.558Z,1520557113.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:33.955Z,1520557113.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:34.358Z,1520557114.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:34.758Z,1520557114.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:35.154Z,1520557115.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:35.572Z,1520557115.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:35.958Z,1520557115.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:36.369Z,1520557116.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:36.770Z,1520557116.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:37.181Z,1520557117.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:37.555Z,1520557117.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:37.978Z,1520557117.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:38.358Z,1520557118.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:38.755Z,1520557118.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:39.158Z,1520557119.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:39.578Z,1520557119.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:39.954Z,1520557119.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:40.358Z,1520557120.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:40.758Z,1520557120.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:41.169Z,1520557121.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:41.570Z,1520557121.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:41.958Z,1520557121.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:42.362Z,1520557122.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:42.762Z,1520557122.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:43.158Z,1520557123.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:43.555Z,1520557123.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:43.958Z,1520557123.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:44.362Z,1520557124.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:44.763Z,1520557124.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:45.163Z,1520557125.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:45.567Z,1520557125.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:45.961Z,1520557125.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:46.366Z,1520557126.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:46.764Z,1520557126.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:47.167Z,1520557127.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:47.570Z,1520557127.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:47.964Z,1520557127.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:48.362Z,1520557128.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:48.759Z,1520557128.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:49.176Z,1520557129.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:49.554Z,1520557129.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:49.956Z,1520557129.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:50.359Z,1520557130.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:50.758Z,1520557130.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:51.162Z,1520557131.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:51.566Z,1520557131.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:51.967Z,1520557131.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:52.366Z,1520557132.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:52.774Z,1520557132.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:53.165Z,1520557133.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:53.563Z,1520557133.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:53.964Z,1520557133.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:54.369Z,1520557134.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:54.763Z,1520557134.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:55.170Z,1520557135.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:55.561Z,1520557135.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:55.954Z,1520557135.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:56.358Z,1520557136.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:56.761Z,1520557136.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:57.155Z,1520557137.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:57.578Z,1520557137.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:57.954Z,1520557137.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:58.358Z,1520557138.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:58.758Z,1520557138.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:59.159Z,1520557139.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:59.555Z,1520557139.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:58:59.958Z,1520557139.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:00.361Z,1520557140.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:00.755Z,1520557140.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:01.162Z,1520557141.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:01.562Z,1520557141.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:01.955Z,1520557141.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:02.366Z,1520557142.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:02.767Z,1520557142.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:03.162Z,1520557143.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:03.567Z,1520557143.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:03.966Z,1520557143.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:04.361Z,1520557144.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:04.767Z,1520557144.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:05.165Z,1520557145.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:05.565Z,1520557145.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:05.964Z,1520557145.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:06.374Z,1520557146.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:06.751Z,1520557146.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:07.170Z,1520557147.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:07.554Z,1520557147.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:07.955Z,1520557147.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:08.363Z,1520557148.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:08.758Z,1520557148.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:09.154Z,1520557149.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:09.558Z,1520557149.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:09.961Z,1520557149.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:10.366Z,1520557150.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:10.770Z,1520557150.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:11.167Z,1520557151.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:11.563Z,1520557151.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:11.965Z,1520557151.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:12.365Z,1520557152.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:12.866Z,1520557152.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:13.171Z,1520557153.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:13.565Z,1520557153.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:13.965Z,1520557153.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:14.364Z,1520557154.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:18.727Z,1520557158.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:18.929Z,1520557158.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:19.301Z,1520557159.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:19.709Z,1520557159.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:20.108Z,1520557160.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:20.477Z,1520557160.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:20.897Z,1520557160.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:21.303Z,1520557161.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:21.685Z,1520557161.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:22.087Z,1520557162.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:22.475Z,1520557162.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:22.891Z,1520557162.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:23.282Z,1520557163.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:23.675Z,1520557163.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:24.081Z,1520557164.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:24.484Z,1520557164.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:24.911Z,1520557164.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:25.281Z,1520557165.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:25.726Z,1520557165.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:26.103Z,1520557166.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:26.494Z,1520557166.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:26.901Z,1520557166.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:27.315Z,1520557167.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:27.699Z,1520557167.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:28.098Z,1520557168.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:28.495Z,1520557168.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:28.887Z,1520557168.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:29.273Z,1520557169.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:29.678Z,1520557169.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:30.087Z,1520557170.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:30.474Z,1520557170.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:30.874Z,1520557170.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:31.276Z,1520557171.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:31.709Z,1520557171.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:32.072Z,1520557172.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:32.513Z,1520557172.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:32.905Z,1520557172.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:33.287Z,1520557173.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:33.706Z,1520557173.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:34.113Z,1520557174.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:34.491Z,1520557174.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:34.906Z,1520557174.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:35.288Z,1520557175.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:35.685Z,1520557175.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:36.086Z,1520557176.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:36.485Z,1520557176.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:36.888Z,1520557176.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:37.284Z,1520557177.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:37.681Z,1520557177.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:38.071Z,1520557178.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:38.512Z,1520557178.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:38.884Z,1520557178.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:39.296Z,1520557179.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:39.709Z,1520557179.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:40.092Z,1520557180.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:40.467Z,1520557180.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:40.900Z,1520557180.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:41.304Z,1520557181.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:41.701Z,1520557181.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:42.092Z,1520557182.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:42.506Z,1520557182.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:42.885Z,1520557182.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:43.287Z,1520557183.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:43.685Z,1520557183.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:44.082Z,1520557184.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:44.493Z,1520557184.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:44.896Z,1520557184.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:45.285Z,1520557185.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:45.685Z,1520557185.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:45.710Z,1520557185.710 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T00:59:45.710Z,1520557185.710 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-03-09T00:59:45.710Z,1520557185.710 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T00:59:45.763Z,1520557185.763 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T00:59:46.112Z,1520557186.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:46.197Z,1520557186.197 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T00:59:46.198Z,1520557186.198 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-03-09T00:59:46.484Z,1520557186.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:46.502Z,1520557186.502 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T00:59:46.503Z,1520557186.503 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T00:59:46.503Z,1520557186.503 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T00:59:46.896Z,1520557186.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:47.314Z,1520557187.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:47.699Z,1520557187.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:48.115Z,1520557188.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:48.516Z,1520557188.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:48.887Z,1520557188.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:49.309Z,1520557189.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:49.687Z,1520557189.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:50.083Z,1520557190.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:50.489Z,1520557190.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:50.890Z,1520557190.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:51.294Z,1520557191.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:51.690Z,1520557191.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:52.084Z,1520557192.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:52.482Z,1520557192.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:52.901Z,1520557192.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:53.283Z,1520557193.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:53.699Z,1520557193.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:54.093Z,1520557194.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:54.489Z,1520557194.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:54.895Z,1520557194.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:55.308Z,1520557195.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:55.714Z,1520557195.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:56.067Z,1520557196.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:56.507Z,1520557196.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:56.883Z,1520557196.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:57.284Z,1520557197.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:57.677Z,1520557197.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:58.082Z,1520557198.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:58.480Z,1520557198.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:58.878Z,1520557198.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:59.285Z,1520557199.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T00:59:59.673Z,1520557199.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:00.113Z,1520557200.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:00.483Z,1520557200.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:00.908Z,1520557200.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:01.297Z,1520557201.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:01.690Z,1520557201.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:02.089Z,1520557202.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:02.517Z,1520557202.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:02.908Z,1520557202.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:03.279Z,1520557203.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:03.691Z,1520557203.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:04.103Z,1520557204.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:04.484Z,1520557204.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:04.888Z,1520557204.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:05.286Z,1520557205.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:05.686Z,1520557205.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:06.091Z,1520557206.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:06.486Z,1520557206.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:06.885Z,1520557206.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:07.283Z,1520557207.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:07.712Z,1520557207.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:08.072Z,1520557208.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:08.524Z,1520557208.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:08.904Z,1520557208.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:09.283Z,1520557209.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:09.705Z,1520557209.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:10.111Z,1520557210.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:10.514Z,1520557210.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:10.891Z,1520557210.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:11.309Z,1520557211.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:11.684Z,1520557211.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:12.083Z,1520557212.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:12.481Z,1520557212.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:12.886Z,1520557212.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:13.291Z,1520557213.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:13.686Z,1520557213.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:14.080Z,1520557214.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:14.485Z,1520557214.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:19.223Z,1520557219.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:19.353Z,1520557219.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:19.698Z,1520557219.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:20.098Z,1520557220.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:20.500Z,1520557220.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:20.897Z,1520557220.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:21.298Z,1520557221.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:21.692Z,1520557221.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:22.133Z,1520557222.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:22.495Z,1520557222.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:22.925Z,1520557222.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:23.307Z,1520557223.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:23.706Z,1520557223.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:24.109Z,1520557224.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:24.515Z,1520557224.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:24.915Z,1520557224.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:25.284Z,1520557225.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:25.699Z,1520557225.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:26.114Z,1520557226.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:26.493Z,1520557226.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:26.895Z,1520557226.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:27.289Z,1520557227.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:27.688Z,1520557227.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:28.094Z,1520557228.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:28.491Z,1520557228.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:28.889Z,1520557228.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:29.289Z,1520557229.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:29.710Z,1520557229.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:30.084Z,1520557230.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:30.523Z,1520557230.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:30.915Z,1520557230.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:31.302Z,1520557231.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:31.721Z,1520557231.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:32.118Z,1520557232.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:32.496Z,1520557232.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:32.915Z,1520557232.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:33.295Z,1520557233.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:33.693Z,1520557233.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:34.089Z,1520557234.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:34.501Z,1520557234.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:34.895Z,1520557234.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:35.295Z,1520557235.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:35.694Z,1520557235.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:36.093Z,1520557236.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:36.515Z,1520557236.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:36.894Z,1520557236.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:37.317Z,1520557237.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:37.702Z,1520557237.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:38.102Z,1520557238.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:38.504Z,1520557238.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:38.912Z,1520557238.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:39.295Z,1520557239.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:39.711Z,1520557239.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:40.095Z,1520557240.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:40.504Z,1520557240.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:40.910Z,1520557240.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:41.309Z,1520557241.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:41.703Z,1520557241.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:42.085Z,1520557242.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:42.502Z,1520557242.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:42.901Z,1520557242.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:43.290Z,1520557243.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:43.688Z,1520557243.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:44.089Z,1520557244.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:44.523Z,1520557244.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:44.887Z,1520557244.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:45.323Z,1520557245.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:45.714Z,1520557245.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:46.091Z,1520557246.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:46.509Z,1520557246.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:46.923Z,1520557246.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:47.317Z,1520557247.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:47.687Z,1520557247.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:48.107Z,1520557248.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:48.524Z,1520557248.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:48.898Z,1520557248.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:49.302Z,1520557249.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:49.701Z,1520557249.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:50.096Z,1520557250.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:50.502Z,1520557250.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:50.900Z,1520557250.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:51.296Z,1520557251.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:51.696Z,1520557251.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:52.114Z,1520557252.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:52.488Z,1520557252.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:52.928Z,1520557252.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:53.306Z,1520557253.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:53.703Z,1520557253.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:54.108Z,1520557254.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:54.518Z,1520557254.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:54.907Z,1520557254.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:55.295Z,1520557255.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:55.705Z,1520557255.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:56.109Z,1520557256.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:56.505Z,1520557256.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:56.903Z,1520557256.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:57.289Z,1520557257.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:57.702Z,1520557257.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:58.103Z,1520557258.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:58.486Z,1520557258.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:58.884Z,1520557258.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:59.290Z,1520557259.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:00:59.718Z,1520557259.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:00.087Z,1520557260.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:00.526Z,1520557260.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:00.890Z,1520557260.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:01.300Z,1520557261.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:01.708Z,1520557261.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:02.116Z,1520557262.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:02.519Z,1520557262.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:02.887Z,1520557262.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:03.308Z,1520557263.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:03.716Z,1520557263.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:04.095Z,1520557264.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:04.491Z,1520557264.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:04.885Z,1520557264.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:05.294Z,1520557265.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:05.692Z,1520557265.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:06.087Z,1520557266.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:06.488Z,1520557266.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:06.888Z,1520557266.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:07.322Z,1520557267.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:07.698Z,1520557267.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:08.118Z,1520557268.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:08.510Z,1520557268.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:08.902Z,1520557268.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:09.309Z,1520557269.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:09.714Z,1520557269.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:10.114Z,1520557270.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:10.484Z,1520557270.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:10.899Z,1520557270.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:11.316Z,1520557271.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:11.692Z,1520557271.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:12.095Z,1520557272.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:12.493Z,1520557272.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:12.895Z,1520557272.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:13.298Z,1520557273.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:13.695Z,1520557273.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:14.090Z,1520557274.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:14.495Z,1520557274.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:14.922Z,1520557274.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:18.199Z,1520557278.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:18.315Z,1520557278.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:18.701Z,1520557278.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:19.096Z,1520557279.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:19.500Z,1520557279.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:19.902Z,1520557279.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:20.286Z,1520557280.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:20.698Z,1520557280.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:21.098Z,1520557281.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:21.488Z,1520557281.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:21.899Z,1520557281.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:22.297Z,1520557282.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:22.698Z,1520557282.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:23.086Z,1520557283.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:23.498Z,1520557283.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:23.886Z,1520557283.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:24.298Z,1520557284.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:24.701Z,1520557284.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:25.083Z,1520557285.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:25.494Z,1520557285.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:25.896Z,1520557285.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:26.298Z,1520557286.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:26.693Z,1520557286.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:27.093Z,1520557287.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:27.495Z,1520557287.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:27.897Z,1520557287.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:28.299Z,1520557288.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:28.697Z,1520557288.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:29.101Z,1520557289.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:29.507Z,1520557289.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:29.897Z,1520557289.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:30.297Z,1520557290.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:30.708Z,1520557290.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:31.086Z,1520557291.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:31.502Z,1520557291.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:31.909Z,1520557291.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:32.286Z,1520557292.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:32.697Z,1520557292.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:33.098Z,1520557293.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:33.483Z,1520557293.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:33.902Z,1520557293.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:34.297Z,1520557294.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:34.683Z,1520557294.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:35.093Z,1520557295.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:35.509Z,1520557295.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:35.884Z,1520557295.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:36.309Z,1520557296.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:36.697Z,1520557296.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:37.087Z,1520557297.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:37.498Z,1520557297.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:37.910Z,1520557297.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:38.286Z,1520557298.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:38.690Z,1520557298.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:39.090Z,1520557299.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:39.486Z,1520557299.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:39.890Z,1520557299.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:40.290Z,1520557300.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:40.690Z,1520557300.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:41.102Z,1520557301.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:41.490Z,1520557301.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:41.890Z,1520557301.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:42.314Z,1520557302.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:42.693Z,1520557302.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:43.097Z,1520557303.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:43.513Z,1520557303.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:43.902Z,1520557303.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:44.298Z,1520557304.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:44.690Z,1520557304.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:45.090Z,1520557305.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:45.491Z,1520557305.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:45.892Z,1520557305.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:46.295Z,1520557306.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:46.698Z,1520557306.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:47.095Z,1520557307.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:47.497Z,1520557307.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:47.901Z,1520557307.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:48.293Z,1520557308.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:48.702Z,1520557308.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:49.098Z,1520557309.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:49.498Z,1520557309.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:49.897Z,1520557309.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:50.299Z,1520557310.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:50.693Z,1520557310.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:51.103Z,1520557311.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:51.500Z,1520557311.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:51.886Z,1520557311.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:52.303Z,1520557312.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:52.686Z,1520557312.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:53.087Z,1520557313.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:53.493Z,1520557313.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:53.901Z,1520557313.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:54.286Z,1520557314.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:54.694Z,1520557314.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:55.090Z,1520557315.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:55.487Z,1520557315.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:55.890Z,1520557315.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:56.290Z,1520557316.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:56.687Z,1520557316.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:57.106Z,1520557317.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:57.490Z,1520557317.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:57.887Z,1520557317.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:58.295Z,1520557318.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:58.694Z,1520557318.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:59.095Z,1520557319.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:59.497Z,1520557319.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:01:59.897Z,1520557319.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:00.298Z,1520557320.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:00.694Z,1520557320.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:01.100Z,1520557321.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:01.495Z,1520557321.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:01.901Z,1520557321.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:02.293Z,1520557322.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:02.690Z,1520557322.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:03.110Z,1520557323.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:03.486Z,1520557323.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:03.890Z,1520557323.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:04.290Z,1520557324.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:04.690Z,1520557324.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:05.090Z,1520557325.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:05.498Z,1520557325.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:05.890Z,1520557325.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:06.286Z,1520557326.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:06.694Z,1520557326.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:07.093Z,1520557327.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:07.151Z,1520557327.151 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-09T01:02:07.487Z,1520557327.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:07.898Z,1520557327.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:08.297Z,1520557328.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:08.694Z,1520557328.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:09.092Z,1520557329.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:09.501Z,1520557329.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:09.897Z,1520557329.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:10.296Z,1520557330.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:10.697Z,1520557330.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:11.094Z,1520557331.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:11.492Z,1520557331.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:11.886Z,1520557331.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:12.286Z,1520557332.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:12.693Z,1520557332.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:13.086Z,1520557333.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:13.488Z,1520557333.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:13.894Z,1520557333.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:14.290Z,1520557334.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:14.320Z,1520557334.320 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-09T01:02:14.320Z,1520557334.320 [Default:CheckIn:C.Wait] Stopped
2018-03-09T01:02:14.321Z,1520557334.321 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-09T01:02:14.321Z,1520557334.321 [Default:CheckIn:D] Running Loop=1
2018-03-09T01:02:14.690Z,1520557334.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:14.730Z,1520557334.730 [Default:CheckIn:D] Stopped
2018-03-09T01:02:14.730Z,1520557334.730 [Default:CheckIn:E] Running Loop=1
2018-03-09T01:02:17.950Z,1520557337.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:17.983Z,1520557337.983 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1036.498763 min 
2018-03-09T01:02:17.984Z,1520557337.984 [Default:CheckIn:E] Stopped
2018-03-09T01:02:17.984Z,1520557337.984 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-09T01:02:17.984Z,1520557337.984 [Default:CheckIn] Stopped
2018-03-09T01:02:17.984Z,1520557337.984 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-09T01:02:17.984Z,1520557337.984 [Default:CheckIn](INFO): Running loop #105
2018-03-09T01:02:17.984Z,1520557337.984 [Default:CheckIn] Running Loop=105
2018-03-09T01:02:17.984Z,1520557337.984 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-09T01:02:17.984Z,1520557337.984 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-09T01:02:18.111Z,1520557338.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:18.424Z,1520557338.424 [NAL9602](INFO): Powering up
2018-03-09T01:02:18.441Z,1520557338.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:18.831Z,1520557338.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:19.234Z,1520557339.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:19.632Z,1520557339.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:20.031Z,1520557340.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:20.437Z,1520557340.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:20.838Z,1520557340.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:21.231Z,1520557341.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:21.623Z,1520557341.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:22.030Z,1520557342.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:22.427Z,1520557342.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:22.824Z,1520557342.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:23.229Z,1520557343.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:23.626Z,1520557343.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:24.019Z,1520557344.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:24.425Z,1520557344.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:24.827Z,1520557344.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:25.227Z,1520557345.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:25.626Z,1520557345.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:26.026Z,1520557346.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:26.427Z,1520557346.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:26.837Z,1520557346.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:27.234Z,1520557347.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:27.632Z,1520557347.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:28.034Z,1520557348.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:28.441Z,1520557348.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:28.823Z,1520557348.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:29.245Z,1520557349.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:29.614Z,1520557349.614 [NAL9602](INFO): NAL9602 initialized
2018-03-09T01:02:29.638Z,1520557349.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:30.023Z,1520557350.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:30.409Z,1520557350.409 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-09T01:02:30.410Z,1520557350.410 [NAL9602] Data Fault, FailCount= 1
2018-03-09T01:02:30.410Z,1520557350.410 [NAL9602](ERROR): Data Fault
2018-03-09T01:02:30.426Z,1520557350.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:30.498Z,1520557350.498 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-09T01:02:30.817Z,1520557350.817 [NAL9602](INFO): Powering down
2018-03-09T01:02:30.835Z,1520557350.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:31.227Z,1520557351.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:31.634Z,1520557351.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:31.725Z,1520557351.725 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-09T01:02:31.725Z,1520557351.725 [NAL9602] No Fault, FailCount= 1
2018-03-09T01:02:32.027Z,1520557352.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:32.434Z,1520557352.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:32.834Z,1520557352.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:33.239Z,1520557353.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:33.623Z,1520557353.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:34.030Z,1520557354.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:34.430Z,1520557354.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:34.834Z,1520557354.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:35.233Z,1520557355.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:35.634Z,1520557355.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:36.034Z,1520557356.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:36.432Z,1520557356.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:36.832Z,1520557356.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:37.233Z,1520557357.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:37.642Z,1520557357.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:38.038Z,1520557358.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:38.426Z,1520557358.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:38.825Z,1520557358.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:39.255Z,1520557359.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:39.623Z,1520557359.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:40.036Z,1520557360.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:40.427Z,1520557360.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:40.834Z,1520557360.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:41.232Z,1520557361.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:41.631Z,1520557361.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:42.034Z,1520557362.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:42.437Z,1520557362.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:42.829Z,1520557362.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:43.234Z,1520557363.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:43.635Z,1520557363.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:44.033Z,1520557364.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:44.434Z,1520557364.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:44.829Z,1520557364.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:45.225Z,1520557365.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:45.627Z,1520557365.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:46.034Z,1520557366.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:46.425Z,1520557366.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:46.830Z,1520557366.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:46.866Z,1520557366.866 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T01:02:46.866Z,1520557366.866 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-03-09T01:02:46.866Z,1520557366.866 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T01:02:46.921Z,1520557366.921 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T01:02:47.237Z,1520557367.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:47.323Z,1520557367.323 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T01:02:47.324Z,1520557367.324 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-03-09T01:02:47.627Z,1520557367.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:47.644Z,1520557367.644 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T01:02:47.644Z,1520557367.644 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T01:02:47.644Z,1520557367.644 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T01:02:48.032Z,1520557368.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:48.455Z,1520557368.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:48.834Z,1520557368.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:49.233Z,1520557369.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:49.642Z,1520557369.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:50.025Z,1520557370.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:50.435Z,1520557370.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:50.835Z,1520557370.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:51.234Z,1520557371.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:51.638Z,1520557371.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:52.046Z,1520557372.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:52.429Z,1520557372.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:52.826Z,1520557372.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:53.226Z,1520557373.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:53.630Z,1520557373.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:54.033Z,1520557374.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:54.433Z,1520557374.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:54.832Z,1520557374.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:55.235Z,1520557375.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:55.634Z,1520557375.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:56.023Z,1520557376.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:56.426Z,1520557376.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:56.827Z,1520557376.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:57.227Z,1520557377.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:57.634Z,1520557377.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:58.033Z,1520557378.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:58.432Z,1520557378.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:58.835Z,1520557378.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:59.232Z,1520557379.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:02:59.630Z,1520557379.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:00.027Z,1520557380.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:00.426Z,1520557380.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:00.823Z,1520557380.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:01.218Z,1520557381.218 [NAL9602](INFO): Powering up NAL9602
2018-03-09T01:03:01.236Z,1520557381.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:01.637Z,1520557381.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:02.026Z,1520557382.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:02.432Z,1520557382.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:02.833Z,1520557382.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:03.237Z,1520557383.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:03.639Z,1520557383.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:04.026Z,1520557384.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:04.437Z,1520557384.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:04.827Z,1520557384.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:05.237Z,1520557385.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:05.623Z,1520557385.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:06.030Z,1520557386.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:06.426Z,1520557386.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:06.833Z,1520557386.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:07.226Z,1520557387.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:07.630Z,1520557387.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:08.034Z,1520557388.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:08.439Z,1520557388.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:08.838Z,1520557388.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:09.233Z,1520557389.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:09.635Z,1520557389.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:10.042Z,1520557390.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:10.433Z,1520557390.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:10.842Z,1520557390.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:11.227Z,1520557391.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:11.623Z,1520557391.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:12.049Z,1520557392.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:12.410Z,1520557392.410 [NAL9602](INFO): NAL9602 initialized
2018-03-09T01:03:12.426Z,1520557392.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:12.834Z,1520557392.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:13.252Z,1520557393.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:13.645Z,1520557393.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:14.045Z,1520557394.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:14.431Z,1520557394.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:14.838Z,1520557394.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:18.002Z,1520557398.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:18.136Z,1520557398.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:18.505Z,1520557398.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:18.888Z,1520557398.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:19.288Z,1520557399.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:19.707Z,1520557399.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:20.075Z,1520557400.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:20.519Z,1520557400.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:20.909Z,1520557400.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:21.299Z,1520557401.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:21.706Z,1520557401.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:22.100Z,1520557402.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:22.478Z,1520557402.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:22.909Z,1520557402.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:23.316Z,1520557403.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:23.709Z,1520557403.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:24.109Z,1520557404.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:24.483Z,1520557404.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:24.889Z,1520557404.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:25.292Z,1520557405.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:25.690Z,1520557405.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:26.086Z,1520557406.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:26.485Z,1520557406.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:26.889Z,1520557406.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:27.288Z,1520557407.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:27.681Z,1520557407.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:28.140Z,1520557408.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:28.501Z,1520557408.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:28.899Z,1520557408.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:29.319Z,1520557409.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:29.693Z,1520557409.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:30.099Z,1520557410.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:30.499Z,1520557410.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:30.897Z,1520557410.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:31.299Z,1520557411.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:31.691Z,1520557411.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:32.096Z,1520557412.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:32.500Z,1520557412.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:32.883Z,1520557412.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:33.304Z,1520557413.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:33.696Z,1520557413.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:34.101Z,1520557414.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:34.503Z,1520557414.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:34.887Z,1520557414.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:35.283Z,1520557415.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:35.680Z,1520557415.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:36.080Z,1520557416.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:36.510Z,1520557416.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:36.887Z,1520557416.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:37.304Z,1520557417.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:37.692Z,1520557417.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:38.100Z,1520557418.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:38.502Z,1520557418.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:38.908Z,1520557418.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:39.302Z,1520557419.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:39.716Z,1520557419.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:40.080Z,1520557420.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:40.496Z,1520557420.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:40.900Z,1520557420.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:41.301Z,1520557421.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:41.692Z,1520557421.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:42.081Z,1520557422.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:42.519Z,1520557422.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:42.902Z,1520557422.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:43.292Z,1520557423.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:43.696Z,1520557423.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:44.100Z,1520557424.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:44.516Z,1520557424.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:44.897Z,1520557424.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:45.321Z,1520557425.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:45.706Z,1520557425.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:46.092Z,1520557426.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:46.499Z,1520557426.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:46.897Z,1520557426.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:47.290Z,1520557427.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:47.718Z,1520557427.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:48.096Z,1520557428.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:48.509Z,1520557428.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:48.903Z,1520557428.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:49.302Z,1520557429.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:49.700Z,1520557429.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:50.102Z,1520557430.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:50.485Z,1520557430.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:50.886Z,1520557430.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:51.280Z,1520557431.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:51.678Z,1520557431.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:52.131Z,1520557432.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:52.487Z,1520557432.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:52.913Z,1520557432.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:53.298Z,1520557433.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:53.698Z,1520557433.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:54.119Z,1520557434.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:54.526Z,1520557434.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:54.926Z,1520557434.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:55.298Z,1520557435.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:55.701Z,1520557435.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:56.087Z,1520557436.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:56.492Z,1520557436.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:56.892Z,1520557436.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:57.290Z,1520557437.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:57.691Z,1520557437.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:58.091Z,1520557438.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:58.490Z,1520557438.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:58.885Z,1520557438.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:59.297Z,1520557439.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:03:59.715Z,1520557439.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:00.096Z,1520557440.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:00.505Z,1520557440.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:00.909Z,1520557440.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:01.299Z,1520557441.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:01.696Z,1520557441.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:02.102Z,1520557442.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:02.503Z,1520557442.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:02.915Z,1520557442.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:03.281Z,1520557443.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:03.701Z,1520557443.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:04.115Z,1520557444.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:04.504Z,1520557444.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:04.899Z,1520557444.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:05.308Z,1520557445.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:05.697Z,1520557445.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:06.086Z,1520557446.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:06.488Z,1520557446.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:06.890Z,1520557446.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:07.284Z,1520557447.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:07.724Z,1520557447.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:08.093Z,1520557448.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:08.514Z,1520557448.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:08.907Z,1520557448.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:09.300Z,1520557449.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:09.708Z,1520557449.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:10.110Z,1520557450.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:10.491Z,1520557450.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:10.910Z,1520557450.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:11.287Z,1520557451.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:11.691Z,1520557451.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:12.095Z,1520557452.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:12.494Z,1520557452.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:12.893Z,1520557452.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:13.281Z,1520557453.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:13.691Z,1520557453.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:14.095Z,1520557454.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:14.480Z,1520557454.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:14.893Z,1520557454.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:18.437Z,1520557458.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:18.590Z,1520557458.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:18.985Z,1520557458.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:19.366Z,1520557459.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:19.762Z,1520557459.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:20.162Z,1520557460.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:20.563Z,1520557460.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:20.961Z,1520557460.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:21.362Z,1520557461.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:21.762Z,1520557461.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:22.160Z,1520557462.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:22.561Z,1520557462.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:22.973Z,1520557462.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:23.373Z,1520557463.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:23.793Z,1520557463.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:24.173Z,1520557464.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:24.563Z,1520557464.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:24.973Z,1520557464.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:25.369Z,1520557465.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:25.763Z,1520557465.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:26.171Z,1520557466.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:26.571Z,1520557466.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:26.968Z,1520557466.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:27.373Z,1520557467.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:27.770Z,1520557467.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:28.177Z,1520557468.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:28.584Z,1520557468.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:28.981Z,1520557468.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:29.381Z,1520557469.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:29.770Z,1520557469.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:30.170Z,1520557470.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:30.572Z,1520557470.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:30.969Z,1520557470.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:31.371Z,1520557471.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:31.760Z,1520557471.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:32.169Z,1520557472.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:32.570Z,1520557472.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:32.960Z,1520557472.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:33.381Z,1520557473.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:33.781Z,1520557473.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:34.181Z,1520557474.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:34.581Z,1520557474.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:34.962Z,1520557474.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:35.374Z,1520557475.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:35.762Z,1520557475.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:36.162Z,1520557476.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:36.562Z,1520557476.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:36.962Z,1520557476.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:37.363Z,1520557477.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:37.760Z,1520557477.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:38.162Z,1520557478.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:38.581Z,1520557478.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:38.979Z,1520557478.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:39.382Z,1520557479.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:39.781Z,1520557479.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:40.160Z,1520557480.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:40.562Z,1520557480.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:40.962Z,1520557480.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:41.366Z,1520557481.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:41.762Z,1520557481.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:42.167Z,1520557482.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:42.560Z,1520557482.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:42.962Z,1520557482.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:43.369Z,1520557483.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:43.777Z,1520557483.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:44.174Z,1520557484.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:44.585Z,1520557484.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:44.977Z,1520557484.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:45.371Z,1520557485.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:45.769Z,1520557485.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:46.167Z,1520557486.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:46.568Z,1520557486.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:46.974Z,1520557486.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:47.374Z,1520557487.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:47.773Z,1520557487.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:48.171Z,1520557488.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:48.565Z,1520557488.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:48.993Z,1520557488.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:49.381Z,1520557489.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:49.778Z,1520557489.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:50.183Z,1520557490.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:50.572Z,1520557490.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:50.970Z,1520557490.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:51.382Z,1520557491.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:51.773Z,1520557491.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:52.160Z,1520557492.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:52.578Z,1520557492.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:52.967Z,1520557492.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:53.372Z,1520557493.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:53.767Z,1520557493.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:54.186Z,1520557494.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:54.573Z,1520557494.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:54.975Z,1520557494.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:55.380Z,1520557495.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:55.765Z,1520557495.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:56.170Z,1520557496.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:56.571Z,1520557496.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:56.970Z,1520557496.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:57.370Z,1520557497.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:57.771Z,1520557497.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:58.165Z,1520557498.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:58.570Z,1520557498.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:58.971Z,1520557498.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:59.382Z,1520557499.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:04:59.780Z,1520557499.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:00.181Z,1520557500.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:00.581Z,1520557500.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:00.963Z,1520557500.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:01.379Z,1520557501.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:01.760Z,1520557501.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:02.162Z,1520557502.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:02.562Z,1520557502.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:02.960Z,1520557502.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:03.362Z,1520557503.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:03.762Z,1520557503.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:04.160Z,1520557504.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:04.581Z,1520557504.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:04.981Z,1520557504.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:05.386Z,1520557505.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:05.781Z,1520557505.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:06.182Z,1520557506.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:06.560Z,1520557506.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:06.962Z,1520557506.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:07.362Z,1520557507.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:07.760Z,1520557507.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:08.163Z,1520557508.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:08.562Z,1520557508.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:08.960Z,1520557508.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:09.362Z,1520557509.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:09.780Z,1520557509.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:10.182Z,1520557510.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:10.581Z,1520557510.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:10.990Z,1520557510.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:11.362Z,1520557511.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:11.766Z,1520557511.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:12.162Z,1520557512.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:12.560Z,1520557512.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:12.963Z,1520557512.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:13.362Z,1520557513.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:13.766Z,1520557513.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:14.162Z,1520557514.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:14.562Z,1520557514.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:14.982Z,1520557514.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:18.246Z,1520557518.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:18.369Z,1520557518.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:18.770Z,1520557518.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:19.147Z,1520557519.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:19.553Z,1520557519.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:19.961Z,1520557519.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:20.338Z,1520557520.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:20.753Z,1520557520.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:21.142Z,1520557521.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:21.543Z,1520557521.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:21.942Z,1520557521.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:22.346Z,1520557522.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:22.749Z,1520557522.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:23.165Z,1520557523.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:23.559Z,1520557523.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:23.965Z,1520557523.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:24.362Z,1520557524.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:24.742Z,1520557524.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:25.142Z,1520557525.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:25.542Z,1520557525.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:25.942Z,1520557525.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:26.339Z,1520557526.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:26.747Z,1520557526.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:27.142Z,1520557527.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:27.542Z,1520557527.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:27.965Z,1520557527.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:28.362Z,1520557528.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:28.761Z,1520557528.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:29.161Z,1520557529.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:29.542Z,1520557529.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:29.942Z,1520557529.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:30.346Z,1520557530.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:30.742Z,1520557530.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:31.146Z,1520557531.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:31.546Z,1520557531.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:31.946Z,1520557531.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:32.342Z,1520557532.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:32.746Z,1520557532.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:33.172Z,1520557533.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:33.549Z,1520557533.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:33.965Z,1520557533.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:34.361Z,1520557534.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:34.738Z,1520557534.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:35.146Z,1520557535.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:35.542Z,1520557535.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:35.946Z,1520557535.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:36.346Z,1520557536.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:36.742Z,1520557536.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:37.142Z,1520557537.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:37.554Z,1520557537.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:37.962Z,1520557537.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:38.361Z,1520557538.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:38.779Z,1520557538.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:39.174Z,1520557539.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:39.561Z,1520557539.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:39.944Z,1520557539.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:40.348Z,1520557540.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:40.747Z,1520557540.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:41.152Z,1520557541.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:41.550Z,1520557541.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:41.952Z,1520557541.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:42.377Z,1520557542.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:42.806Z,1520557542.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:43.185Z,1520557543.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:43.551Z,1520557543.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:43.955Z,1520557543.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:44.359Z,1520557544.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:44.754Z,1520557544.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:45.149Z,1520557545.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:45.554Z,1520557545.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:45.945Z,1520557545.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:46.352Z,1520557546.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:46.742Z,1520557546.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:47.142Z,1520557547.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:47.546Z,1520557547.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:47.960Z,1520557547.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:47.978Z,1520557547.978 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T01:05:47.978Z,1520557547.978 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-03-09T01:05:47.978Z,1520557547.978 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T01:05:47.991Z,1520557547.991 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T01:05:48.342Z,1520557548.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:48.393Z,1520557548.393 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T01:05:48.393Z,1520557548.393 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-03-09T01:05:48.757Z,1520557548.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:48.798Z,1520557548.798 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T01:05:48.798Z,1520557548.798 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T01:05:48.799Z,1520557548.799 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T01:05:49.153Z,1520557549.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:49.550Z,1520557549.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:49.954Z,1520557549.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:50.347Z,1520557550.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:50.743Z,1520557550.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:51.150Z,1520557551.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:51.558Z,1520557551.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:51.950Z,1520557551.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:52.348Z,1520557552.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:52.747Z,1520557552.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:53.138Z,1520557553.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:53.551Z,1520557553.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:53.965Z,1520557553.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:54.365Z,1520557554.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:54.769Z,1520557554.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:55.157Z,1520557555.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:55.542Z,1520557555.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:55.953Z,1520557555.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:56.351Z,1520557556.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:56.747Z,1520557556.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:57.150Z,1520557557.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:57.550Z,1520557557.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:57.948Z,1520557557.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:58.359Z,1520557558.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:58.750Z,1520557558.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:59.160Z,1520557559.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:59.561Z,1520557559.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:05:59.957Z,1520557559.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:00.355Z,1520557560.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:00.742Z,1520557560.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:01.142Z,1520557561.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:01.540Z,1520557561.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:01.942Z,1520557561.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:02.342Z,1520557562.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:02.740Z,1520557562.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:03.142Z,1520557563.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:03.555Z,1520557563.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:03.940Z,1520557563.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:04.359Z,1520557564.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:04.760Z,1520557564.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:05.161Z,1520557565.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:05.561Z,1520557565.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:05.943Z,1520557565.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:06.341Z,1520557566.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:06.742Z,1520557566.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:07.142Z,1520557567.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:07.540Z,1520557567.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:07.942Z,1520557567.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:08.362Z,1520557568.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:08.736Z,1520557568.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:09.145Z,1520557569.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:09.562Z,1520557569.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:09.960Z,1520557569.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:10.365Z,1520557570.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:10.762Z,1520557570.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:11.140Z,1520557571.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:11.542Z,1520557571.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:11.942Z,1520557571.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:12.346Z,1520557572.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:12.742Z,1520557572.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:13.142Z,1520557573.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:13.540Z,1520557573.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:13.953Z,1520557573.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:14.350Z,1520557574.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:14.753Z,1520557574.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:15.171Z,1520557575.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:18.293Z,1520557578.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:18.430Z,1520557578.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:18.809Z,1520557578.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:19.205Z,1520557579.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:19.613Z,1520557579.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:20.016Z,1520557580.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:20.425Z,1520557580.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:20.814Z,1520557580.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:21.224Z,1520557581.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:21.619Z,1520557581.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:22.001Z,1520557582.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:22.406Z,1520557582.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:22.822Z,1520557582.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:23.200Z,1520557583.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:23.607Z,1520557583.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:24.001Z,1520557584.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:24.401Z,1520557584.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:24.807Z,1520557584.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:25.212Z,1520557585.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:25.626Z,1520557585.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:26.030Z,1520557586.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:26.437Z,1520557586.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:26.806Z,1520557586.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:27.215Z,1520557587.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:27.614Z,1520557587.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:27.996Z,1520557587.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:28.409Z,1520557588.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:28.801Z,1520557588.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:29.202Z,1520557589.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:29.602Z,1520557589.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:30.005Z,1520557590.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:30.425Z,1520557590.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:30.813Z,1520557590.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:31.234Z,1520557591.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:31.615Z,1520557591.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:32.006Z,1520557592.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:32.406Z,1520557592.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:32.810Z,1520557592.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:33.221Z,1520557593.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:33.614Z,1520557593.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:34.001Z,1520557594.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:34.402Z,1520557594.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:34.805Z,1520557594.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:35.201Z,1520557595.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:35.627Z,1520557595.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:36.015Z,1520557596.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:36.415Z,1520557596.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:36.833Z,1520557596.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:37.209Z,1520557597.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:37.600Z,1520557597.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:38.014Z,1520557598.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:38.405Z,1520557598.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:38.805Z,1520557598.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:39.208Z,1520557599.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:39.620Z,1520557599.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:40.005Z,1520557600.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:40.421Z,1520557600.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:40.826Z,1520557600.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:41.213Z,1520557601.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:41.625Z,1520557601.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:42.015Z,1520557602.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:42.441Z,1520557602.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:42.815Z,1520557602.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:43.217Z,1520557603.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:43.604Z,1520557603.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:44.004Z,1520557604.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:44.407Z,1520557604.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:44.807Z,1520557604.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:45.214Z,1520557605.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:45.614Z,1520557605.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:46.025Z,1520557606.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:46.433Z,1520557606.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:46.826Z,1520557606.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:47.220Z,1520557607.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:47.614Z,1520557607.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:48.014Z,1520557608.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:48.408Z,1520557608.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:48.806Z,1520557608.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:49.209Z,1520557609.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:49.601Z,1520557609.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:50.009Z,1520557610.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:50.412Z,1520557610.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:50.809Z,1520557610.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:51.217Z,1520557611.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:51.621Z,1520557611.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:52.016Z,1520557612.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:52.425Z,1520557612.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:52.818Z,1520557612.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:53.230Z,1520557613.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:53.602Z,1520557613.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:54.025Z,1520557614.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:54.401Z,1520557614.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:54.808Z,1520557614.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:55.212Z,1520557615.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:55.610Z,1520557615.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:56.012Z,1520557616.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:56.426Z,1520557616.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:56.826Z,1520557616.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:57.225Z,1520557617.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:57.626Z,1520557617.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:58.002Z,1520557618.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:58.407Z,1520557618.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:58.813Z,1520557618.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:59.210Z,1520557619.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:59.610Z,1520557619.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:06:59.999Z,1520557619.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:00.399Z,1520557620.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:00.806Z,1520557620.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:01.212Z,1520557621.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:01.617Z,1520557621.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:02.016Z,1520557622.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:02.421Z,1520557622.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:02.819Z,1520557622.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:03.202Z,1520557623.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:03.605Z,1520557623.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:04.014Z,1520557624.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:04.413Z,1520557624.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:04.814Z,1520557624.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:05.234Z,1520557625.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:05.611Z,1520557625.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:06.010Z,1520557626.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:06.418Z,1520557626.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:06.818Z,1520557626.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:07.218Z,1520557627.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:07.619Z,1520557627.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:08.036Z,1520557628.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:08.404Z,1520557628.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:08.805Z,1520557628.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:09.206Z,1520557629.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:09.618Z,1520557629.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:10.011Z,1520557630.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:10.422Z,1520557630.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:10.803Z,1520557630.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:11.221Z,1520557631.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:11.605Z,1520557631.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:12.010Z,1520557632.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:12.422Z,1520557632.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:12.821Z,1520557632.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:13.218Z,1520557633.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:13.608Z,1520557633.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:14.006Z,1520557634.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:14.409Z,1520557634.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:14.800Z,1520557634.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:15.205Z,1520557635.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:18.494Z,1520557638.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:18.531Z,1520557638.531 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-09T01:02:17.0Z
2018-03-09T01:07:18.531Z,1520557638.531 [Default:CheckIn:Read_GPS] Stopped
2018-03-09T01:07:18.531Z,1520557638.531 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-09T01:07:18.630Z,1520557638.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:19.076Z,1520557639.076 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20180308T074127/Courier0420.lzma
2018-03-09T01:07:19.109Z,1520557639.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:19.406Z,1520557639.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:19.768Z,1520557639.768 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0420.lzma.bak
2018-03-09T01:07:19.768Z,1520557639.768 [DataOverHttps](INFO): SBD MOMSN=7990769
2018-03-09T01:07:19.803Z,1520557639.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:20.397Z,1520557640.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:20.592Z,1520557640.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:23.937Z,1520557643.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:24.062Z,1520557644.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:24.422Z,1520557644.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:24.821Z,1520557644.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:25.214Z,1520557645.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:25.606Z,1520557645.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:26.009Z,1520557646.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:29.266Z,1520557649.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:29.429Z,1520557649.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:29.768Z,1520557649.768 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20180308T074127/Express0421.lzma
2018-03-09T01:07:29.801Z,1520557649.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:30.194Z,1520557650.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:30.572Z,1520557650.572 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0421.lzma.bak
2018-03-09T01:07:30.572Z,1520557650.572 [DataOverHttps](INFO): SBD MOMSN=7990773
2018-03-09T01:07:30.593Z,1520557650.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:31.182Z,1520557651.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:31.206Z,1520557651.206 [Default:CheckIn:Read_Iridium] Stopped
2018-03-09T01:07:31.206Z,1520557651.206 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-09T01:07:31.206Z,1520557651.206 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-09T01:07:31.385Z,1520557651.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:34.553Z,1520557654.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:34.674Z,1520557654.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:35.087Z,1520557655.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:35.469Z,1520557655.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:35.862Z,1520557655.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:36.271Z,1520557656.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:36.666Z,1520557656.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:37.062Z,1520557657.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:37.473Z,1520557657.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:37.866Z,1520557657.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:38.269Z,1520557658.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:38.664Z,1520557658.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:39.063Z,1520557659.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:39.472Z,1520557659.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:39.875Z,1520557659.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:40.276Z,1520557660.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:40.672Z,1520557660.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:41.062Z,1520557661.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:41.458Z,1520557661.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:41.860Z,1520557661.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:42.260Z,1520557662.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:42.667Z,1520557662.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:43.067Z,1520557663.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:43.482Z,1520557663.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:43.858Z,1520557663.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:44.253Z,1520557664.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:44.690Z,1520557664.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:45.090Z,1520557665.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:45.471Z,1520557665.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:45.881Z,1520557665.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:46.267Z,1520557666.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:46.662Z,1520557666.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:47.067Z,1520557667.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:47.464Z,1520557667.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:47.857Z,1520557667.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:48.264Z,1520557668.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:48.665Z,1520557668.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:49.066Z,1520557669.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:49.464Z,1520557669.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:49.890Z,1520557669.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:50.275Z,1520557670.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:50.680Z,1520557670.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:51.078Z,1520557671.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:51.453Z,1520557671.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:51.873Z,1520557671.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:52.258Z,1520557672.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:52.656Z,1520557672.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:53.058Z,1520557673.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:53.458Z,1520557673.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:53.856Z,1520557673.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:54.262Z,1520557674.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:54.666Z,1520557674.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:55.073Z,1520557675.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:55.485Z,1520557675.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:55.869Z,1520557675.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:56.269Z,1520557676.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:56.663Z,1520557676.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:57.070Z,1520557677.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:57.459Z,1520557677.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:57.863Z,1520557677.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:58.270Z,1520557678.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:58.667Z,1520557678.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:59.065Z,1520557679.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:59.471Z,1520557679.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:07:59.865Z,1520557679.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:00.273Z,1520557680.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:00.677Z,1520557680.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:01.074Z,1520557681.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:01.478Z,1520557681.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:01.872Z,1520557681.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:02.271Z,1520557682.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:02.668Z,1520557682.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:03.058Z,1520557683.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:03.458Z,1520557683.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:03.871Z,1520557683.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:04.260Z,1520557684.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:04.654Z,1520557684.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:05.071Z,1520557685.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:05.466Z,1520557685.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:05.870Z,1520557685.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:06.271Z,1520557686.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:06.669Z,1520557686.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:07.062Z,1520557687.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:07.463Z,1520557687.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:07.861Z,1520557687.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:08.258Z,1520557688.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:08.664Z,1520557688.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:09.071Z,1520557689.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:09.466Z,1520557689.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:09.864Z,1520557689.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:10.267Z,1520557690.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:10.673Z,1520557690.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:11.075Z,1520557691.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:11.478Z,1520557691.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:11.878Z,1520557691.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:12.275Z,1520557692.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:12.671Z,1520557692.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:13.059Z,1520557693.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:13.474Z,1520557693.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:13.859Z,1520557693.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:14.253Z,1520557694.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:14.658Z,1520557694.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:15.054Z,1520557695.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:15.471Z,1520557695.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:15.874Z,1520557695.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:16.277Z,1520557696.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:16.682Z,1520557696.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:17.083Z,1520557697.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:17.454Z,1520557697.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:17.857Z,1520557697.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:18.253Z,1520557698.253 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-09T01:08:18.283Z,1520557698.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:18.658Z,1520557698.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:19.061Z,1520557699.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:19.458Z,1520557699.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:19.861Z,1520557699.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:20.262Z,1520557700.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:20.658Z,1520557700.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:21.055Z,1520557701.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:21.458Z,1520557701.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:21.857Z,1520557701.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:22.254Z,1520557702.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:22.662Z,1520557702.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:23.077Z,1520557703.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:23.461Z,1520557703.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:23.878Z,1520557703.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:24.258Z,1520557704.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:24.655Z,1520557704.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:25.058Z,1520557705.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:25.459Z,1520557705.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:25.855Z,1520557705.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:26.258Z,1520557706.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:26.658Z,1520557706.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:27.051Z,1520557707.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:27.458Z,1520557707.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:27.858Z,1520557707.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:28.256Z,1520557708.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:28.666Z,1520557708.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:29.066Z,1520557709.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:29.458Z,1520557709.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:29.867Z,1520557709.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:30.267Z,1520557710.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:30.665Z,1520557710.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:31.065Z,1520557711.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:31.462Z,1520557711.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:31.861Z,1520557711.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:35.067Z,1520557715.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:35.181Z,1520557715.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:35.557Z,1520557715.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:35.958Z,1520557715.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:36.346Z,1520557716.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:36.765Z,1520557716.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:37.158Z,1520557717.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:37.546Z,1520557717.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:37.965Z,1520557717.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:38.362Z,1520557718.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:38.742Z,1520557718.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:39.165Z,1520557719.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:39.558Z,1520557719.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:39.942Z,1520557719.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:40.350Z,1520557720.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:40.750Z,1520557720.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:41.142Z,1520557721.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:41.546Z,1520557721.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:41.950Z,1520557721.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:42.342Z,1520557722.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:42.746Z,1520557722.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:43.154Z,1520557723.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:43.552Z,1520557723.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:43.952Z,1520557723.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:44.353Z,1520557724.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:44.753Z,1520557724.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:45.153Z,1520557725.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:45.558Z,1520557725.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:45.954Z,1520557725.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:46.354Z,1520557726.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:46.758Z,1520557726.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:47.142Z,1520557727.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:47.554Z,1520557727.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:47.949Z,1520557727.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:48.342Z,1520557728.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:48.729Z,1520557728.729 [NAL9602](INFO): Powering down
2018-03-09T01:08:48.748Z,1520557728.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:48.817Z,1520557728.817 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T01:08:48.818Z,1520557728.818 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-03-09T01:08:48.818Z,1520557728.818 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T01:08:48.830Z,1520557728.830 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T01:08:49.146Z,1520557729.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:49.210Z,1520557729.210 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T01:08:49.211Z,1520557729.211 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-03-09T01:08:49.546Z,1520557729.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:49.584Z,1520557729.584 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T01:08:49.584Z,1520557729.584 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T01:08:49.589Z,1520557729.589 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T01:08:49.951Z,1520557729.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:50.346Z,1520557730.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:50.745Z,1520557730.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:51.147Z,1520557731.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:51.543Z,1520557731.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:51.950Z,1520557731.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:52.363Z,1520557732.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:52.747Z,1520557732.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:53.154Z,1520557733.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:53.562Z,1520557733.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:53.945Z,1520557733.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:54.356Z,1520557734.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:54.753Z,1520557734.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:55.150Z,1520557735.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:55.553Z,1520557735.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:55.953Z,1520557735.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:56.353Z,1520557736.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:56.757Z,1520557736.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:57.163Z,1520557737.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:57.554Z,1520557737.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:57.954Z,1520557737.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:58.354Z,1520557738.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:58.743Z,1520557738.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:59.146Z,1520557739.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:59.546Z,1520557739.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:08:59.939Z,1520557739.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:00.346Z,1520557740.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:00.746Z,1520557740.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:01.143Z,1520557741.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:01.546Z,1520557741.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:01.953Z,1520557741.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:02.350Z,1520557742.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:02.750Z,1520557742.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:03.150Z,1520557743.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:03.569Z,1520557743.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:03.959Z,1520557743.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:04.355Z,1520557744.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:04.752Z,1520557744.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:05.153Z,1520557745.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:05.549Z,1520557745.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:05.950Z,1520557745.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:06.354Z,1520557746.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:06.753Z,1520557746.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:07.150Z,1520557747.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:07.553Z,1520557747.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:07.953Z,1520557747.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:08.354Z,1520557748.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:08.753Z,1520557748.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:09.154Z,1520557749.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:09.539Z,1520557749.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:09.958Z,1520557749.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:10.353Z,1520557750.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:10.754Z,1520557750.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:11.159Z,1520557751.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:11.554Z,1520557751.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:11.953Z,1520557751.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:12.349Z,1520557752.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:12.753Z,1520557752.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:13.144Z,1520557753.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:13.549Z,1520557753.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:13.953Z,1520557753.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:14.353Z,1520557754.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:14.749Z,1520557754.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:15.149Z,1520557755.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:15.557Z,1520557755.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:15.946Z,1520557755.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:16.346Z,1520557756.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:16.743Z,1520557756.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:17.146Z,1520557757.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:17.546Z,1520557757.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:17.946Z,1520557757.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:18.346Z,1520557758.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:18.762Z,1520557758.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:19.143Z,1520557759.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:19.546Z,1520557759.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:19.948Z,1520557759.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:20.350Z,1520557760.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:20.746Z,1520557760.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:21.146Z,1520557761.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:21.574Z,1520557761.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:21.946Z,1520557761.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:22.354Z,1520557762.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:22.753Z,1520557762.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:23.151Z,1520557763.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:23.551Z,1520557763.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:23.953Z,1520557763.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:24.354Z,1520557764.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:24.755Z,1520557764.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:25.153Z,1520557765.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:25.554Z,1520557765.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:25.960Z,1520557765.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:26.355Z,1520557766.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:26.755Z,1520557766.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:27.152Z,1520557767.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:27.556Z,1520557767.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:27.950Z,1520557767.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:28.348Z,1520557768.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:28.753Z,1520557768.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:29.143Z,1520557769.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:29.547Z,1520557769.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:29.957Z,1520557769.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:30.359Z,1520557770.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:30.746Z,1520557770.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:31.146Z,1520557771.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:31.557Z,1520557771.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:31.946Z,1520557771.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:35.175Z,1520557775.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:35.299Z,1520557775.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:35.689Z,1520557775.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:36.089Z,1520557776.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:36.487Z,1520557776.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:36.880Z,1520557776.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:37.279Z,1520557777.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:37.703Z,1520557777.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:38.076Z,1520557778.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:38.517Z,1520557778.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:38.885Z,1520557778.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:39.288Z,1520557779.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:39.694Z,1520557779.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:40.101Z,1520557780.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:40.523Z,1520557780.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:40.891Z,1520557780.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:41.293Z,1520557781.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:41.692Z,1520557781.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:42.124Z,1520557782.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:42.484Z,1520557782.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:42.888Z,1520557782.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:43.280Z,1520557783.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:43.674Z,1520557783.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:44.073Z,1520557784.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:44.471Z,1520557784.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:44.913Z,1520557784.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:45.273Z,1520557785.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:45.705Z,1520557785.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:46.081Z,1520557786.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:46.478Z,1520557786.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:46.898Z,1520557786.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:47.268Z,1520557787.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:47.679Z,1520557787.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:48.109Z,1520557788.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:48.468Z,1520557788.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:48.908Z,1520557788.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:49.293Z,1520557789.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:49.679Z,1520557789.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:50.080Z,1520557790.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:50.486Z,1520557790.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:50.883Z,1520557790.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:51.280Z,1520557791.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:51.684Z,1520557791.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:52.085Z,1520557792.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:52.510Z,1520557792.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:52.883Z,1520557792.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:53.297Z,1520557793.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:53.685Z,1520557793.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:54.091Z,1520557794.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:54.497Z,1520557794.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:54.905Z,1520557794.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:55.297Z,1520557795.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:55.667Z,1520557795.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:56.118Z,1520557796.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:56.487Z,1520557796.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:56.864Z,1520557796.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:57.273Z,1520557797.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:57.680Z,1520557797.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:58.067Z,1520557798.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:58.475Z,1520557798.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:58.875Z,1520557798.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:59.263Z,1520557799.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:09:59.697Z,1520557799.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:00.063Z,1520557800.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:00.505Z,1520557800.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:00.885Z,1520557800.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:01.266Z,1520557801.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:01.686Z,1520557801.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:02.103Z,1520557802.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:02.505Z,1520557802.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:02.867Z,1520557802.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:03.308Z,1520557803.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:03.691Z,1520557803.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:04.083Z,1520557804.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:04.479Z,1520557804.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:04.885Z,1520557804.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:05.282Z,1520557805.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:05.681Z,1520557805.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:06.079Z,1520557806.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:06.482Z,1520557806.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:06.900Z,1520557806.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:07.278Z,1520557807.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:07.667Z,1520557807.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:08.073Z,1520557808.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:08.479Z,1520557808.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:08.867Z,1520557808.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:09.308Z,1520557809.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:09.705Z,1520557809.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:10.085Z,1520557810.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:10.504Z,1520557810.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:10.884Z,1520557810.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:11.282Z,1520557811.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:11.679Z,1520557811.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:12.085Z,1520557812.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:12.490Z,1520557812.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:12.883Z,1520557812.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:13.282Z,1520557813.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:13.679Z,1520557813.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:14.102Z,1520557814.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:14.479Z,1520557814.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:14.904Z,1520557814.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:15.307Z,1520557815.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:15.682Z,1520557815.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:16.068Z,1520557816.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:16.510Z,1520557816.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:16.908Z,1520557816.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:17.283Z,1520557817.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:17.712Z,1520557817.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:18.079Z,1520557818.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:18.483Z,1520557818.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:18.881Z,1520557818.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:19.283Z,1520557819.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:19.683Z,1520557819.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:20.082Z,1520557820.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:20.479Z,1520557820.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:20.875Z,1520557820.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:21.308Z,1520557821.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:21.679Z,1520557821.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:22.106Z,1520557822.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:22.484Z,1520557822.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:22.890Z,1520557822.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:23.267Z,1520557823.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:23.703Z,1520557823.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:24.105Z,1520557824.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:24.483Z,1520557824.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:24.898Z,1520557824.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:25.287Z,1520557825.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:25.681Z,1520557825.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:26.081Z,1520557826.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:26.485Z,1520557826.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:26.883Z,1520557826.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:27.283Z,1520557827.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:27.681Z,1520557827.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:28.079Z,1520557828.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:28.509Z,1520557828.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:28.882Z,1520557828.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:29.304Z,1520557829.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:29.711Z,1520557829.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:30.094Z,1520557830.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:30.505Z,1520557830.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:30.925Z,1520557830.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:31.272Z,1520557831.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:31.693Z,1520557831.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:32.101Z,1520557832.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:35.282Z,1520557835.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:35.401Z,1520557835.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:35.778Z,1520557835.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:36.171Z,1520557836.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:36.570Z,1520557836.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:36.978Z,1520557836.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:37.370Z,1520557837.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:37.767Z,1520557837.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:38.169Z,1520557838.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:38.570Z,1520557838.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:38.967Z,1520557838.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:39.369Z,1520557839.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:39.772Z,1520557839.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:40.167Z,1520557840.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:40.570Z,1520557840.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:40.973Z,1520557840.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:41.373Z,1520557841.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:41.769Z,1520557841.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:42.169Z,1520557842.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:42.570Z,1520557842.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:42.969Z,1520557842.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:43.370Z,1520557843.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:43.767Z,1520557843.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:44.168Z,1520557844.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:44.568Z,1520557844.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:44.969Z,1520557844.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:45.369Z,1520557845.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:45.769Z,1520557845.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:46.167Z,1520557846.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:46.569Z,1520557846.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:46.974Z,1520557846.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:47.370Z,1520557847.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:47.769Z,1520557847.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:48.174Z,1520557848.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:48.573Z,1520557848.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:48.969Z,1520557848.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:49.370Z,1520557849.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:49.769Z,1520557849.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:50.170Z,1520557850.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:50.569Z,1520557850.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:50.959Z,1520557850.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:51.361Z,1520557851.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:51.762Z,1520557851.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:52.162Z,1520557852.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:52.562Z,1520557852.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:52.963Z,1520557852.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:53.362Z,1520557853.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:53.762Z,1520557853.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:54.162Z,1520557854.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:54.573Z,1520557854.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:54.962Z,1520557854.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:55.374Z,1520557855.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:55.762Z,1520557855.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:56.182Z,1520557856.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:56.574Z,1520557856.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:56.962Z,1520557856.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:57.384Z,1520557857.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:57.774Z,1520557857.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:58.162Z,1520557858.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:58.562Z,1520557858.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:58.975Z,1520557858.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:59.362Z,1520557859.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:10:59.762Z,1520557859.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:00.162Z,1520557860.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:00.566Z,1520557860.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:00.962Z,1520557860.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:01.363Z,1520557861.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:01.763Z,1520557861.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:02.162Z,1520557862.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:02.566Z,1520557862.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:02.962Z,1520557862.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:03.361Z,1520557863.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:03.763Z,1520557863.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:04.162Z,1520557864.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:04.562Z,1520557864.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:04.959Z,1520557864.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:05.362Z,1520557865.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:05.762Z,1520557865.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:06.159Z,1520557866.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:06.566Z,1520557866.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:06.962Z,1520557866.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:07.366Z,1520557867.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:07.762Z,1520557867.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:08.165Z,1520557868.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:08.560Z,1520557868.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:08.962Z,1520557868.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:09.365Z,1520557869.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:09.762Z,1520557869.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:10.167Z,1520557870.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:10.566Z,1520557870.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:10.967Z,1520557870.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:11.371Z,1520557871.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:11.769Z,1520557871.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:12.167Z,1520557872.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:12.569Z,1520557872.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:12.970Z,1520557872.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:13.371Z,1520557873.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:13.770Z,1520557873.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:14.170Z,1520557874.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:14.570Z,1520557874.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:14.969Z,1520557874.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:15.369Z,1520557875.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:15.766Z,1520557875.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:16.174Z,1520557876.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:16.570Z,1520557876.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:16.966Z,1520557876.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:17.370Z,1520557877.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:17.770Z,1520557877.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:18.167Z,1520557878.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:18.569Z,1520557878.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:18.969Z,1520557878.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:19.369Z,1520557879.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:19.769Z,1520557879.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:20.169Z,1520557880.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:20.567Z,1520557880.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:20.968Z,1520557880.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:21.373Z,1520557881.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:21.759Z,1520557881.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:22.173Z,1520557882.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:22.562Z,1520557882.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:22.959Z,1520557882.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:23.362Z,1520557883.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:23.762Z,1520557883.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:24.161Z,1520557884.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:24.562Z,1520557884.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:24.962Z,1520557884.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:25.362Z,1520557885.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:25.774Z,1520557885.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:26.162Z,1520557886.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:26.573Z,1520557886.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:26.962Z,1520557886.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:27.362Z,1520557887.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:27.759Z,1520557887.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:28.174Z,1520557888.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:28.562Z,1520557888.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:28.962Z,1520557888.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:29.362Z,1520557889.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:29.762Z,1520557889.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:30.162Z,1520557890.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:30.575Z,1520557890.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:30.962Z,1520557890.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:31.362Z,1520557891.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:31.762Z,1520557891.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:32.162Z,1520557892.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:35.338Z,1520557895.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:35.456Z,1520557895.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:35.836Z,1520557895.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:36.224Z,1520557896.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:36.639Z,1520557896.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:37.045Z,1520557897.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:37.433Z,1520557897.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:37.845Z,1520557897.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:38.245Z,1520557898.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:38.640Z,1520557898.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:39.038Z,1520557899.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:39.446Z,1520557899.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:39.821Z,1520557899.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:40.226Z,1520557900.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:40.626Z,1520557900.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:41.022Z,1520557901.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:41.430Z,1520557901.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:41.842Z,1520557901.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:42.266Z,1520557902.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:42.637Z,1520557902.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:43.036Z,1520557903.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:43.424Z,1520557903.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:43.838Z,1520557903.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:44.248Z,1520557904.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:44.628Z,1520557904.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:45.027Z,1520557905.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:45.426Z,1520557905.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:45.828Z,1520557905.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:46.226Z,1520557906.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:46.633Z,1520557906.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:47.037Z,1520557907.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:47.433Z,1520557907.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:47.829Z,1520557907.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:48.233Z,1520557908.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:48.623Z,1520557908.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:49.027Z,1520557909.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:49.425Z,1520557909.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:49.823Z,1520557909.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:49.858Z,1520557909.858 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T01:11:49.858Z,1520557909.858 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-03-09T01:11:49.859Z,1520557909.859 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T01:11:49.872Z,1520557909.872 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T01:11:50.226Z,1520557910.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:50.273Z,1520557910.273 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T01:11:50.273Z,1520557910.273 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-03-09T01:11:50.626Z,1520557910.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:50.658Z,1520557910.658 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T01:11:50.659Z,1520557910.659 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T01:11:50.659Z,1520557910.659 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T01:11:51.026Z,1520557911.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:51.446Z,1520557911.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:51.832Z,1520557911.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:52.234Z,1520557912.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:52.632Z,1520557912.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:53.031Z,1520557913.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:53.435Z,1520557913.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:53.832Z,1520557913.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:54.237Z,1520557914.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:54.632Z,1520557914.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:55.029Z,1520557915.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:55.438Z,1520557915.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:55.831Z,1520557915.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:56.234Z,1520557916.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:56.633Z,1520557916.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:57.034Z,1520557917.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:57.434Z,1520557917.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:57.835Z,1520557917.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:58.235Z,1520557918.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:58.634Z,1520557918.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:59.026Z,1520557919.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:59.430Z,1520557919.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:11:59.885Z,1520557919.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:00.231Z,1520557920.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:00.630Z,1520557920.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:01.032Z,1520557921.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:01.433Z,1520557921.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:01.829Z,1520557921.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:02.236Z,1520557922.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:02.633Z,1520557922.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:03.027Z,1520557923.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:03.432Z,1520557923.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:03.833Z,1520557923.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:04.234Z,1520557924.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:04.633Z,1520557924.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:05.033Z,1520557925.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:05.433Z,1520557925.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:05.833Z,1520557925.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:06.234Z,1520557926.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:06.629Z,1520557926.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:07.033Z,1520557927.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:07.433Z,1520557927.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:07.463Z,1520557927.463 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-09T01:12:07.831Z,1520557927.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:08.229Z,1520557928.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:08.637Z,1520557928.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:09.031Z,1520557929.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:09.429Z,1520557929.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:09.833Z,1520557929.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:10.223Z,1520557930.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:10.637Z,1520557930.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:11.026Z,1520557931.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:11.426Z,1520557931.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:11.837Z,1520557931.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:12.226Z,1520557932.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:12.626Z,1520557932.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:13.026Z,1520557933.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:13.426Z,1520557933.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:13.822Z,1520557933.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:14.226Z,1520557934.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:14.629Z,1520557934.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:15.023Z,1520557935.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:15.438Z,1520557935.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:15.833Z,1520557935.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:16.230Z,1520557936.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:16.634Z,1520557936.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:17.032Z,1520557937.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:17.432Z,1520557937.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:17.829Z,1520557937.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:18.233Z,1520557938.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:18.627Z,1520557938.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:18.658Z,1520557938.658 [CBIT](INFO): Clearing failed state for component DropWeight
2018-03-09T01:12:18.658Z,1520557938.658 [DropWeight] No Fault, FailCount= 1
2018-03-09T01:12:19.032Z,1520557939.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:19.434Z,1520557939.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:19.829Z,1520557939.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:20.234Z,1520557940.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:20.635Z,1520557940.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:21.034Z,1520557941.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:21.434Z,1520557941.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:21.834Z,1520557941.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:22.235Z,1520557942.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:22.633Z,1520557942.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:23.038Z,1520557943.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:23.435Z,1520557943.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:23.844Z,1520557943.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:24.235Z,1520557944.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:24.628Z,1520557944.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:25.027Z,1520557945.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:25.427Z,1520557945.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:25.826Z,1520557945.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:26.226Z,1520557946.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:26.626Z,1520557946.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:27.023Z,1520557947.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:27.427Z,1520557947.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:27.838Z,1520557947.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:28.226Z,1520557948.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:28.626Z,1520557948.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:29.026Z,1520557949.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:29.426Z,1520557949.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:29.838Z,1520557949.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:30.227Z,1520557950.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:30.623Z,1520557950.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:31.026Z,1520557951.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:31.426Z,1520557951.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:31.457Z,1520557951.457 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-09T01:12:31.457Z,1520557951.457 [Default:CheckIn:C.Wait] Stopped
2018-03-09T01:12:31.457Z,1520557951.457 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-09T01:12:31.457Z,1520557951.457 [Default:CheckIn:D] Running Loop=1
2018-03-09T01:12:31.825Z,1520557951.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:31.870Z,1520557951.870 [Default:CheckIn:D] Stopped
2018-03-09T01:12:31.870Z,1520557951.870 [Default:CheckIn:E] Running Loop=1
2018-03-09T01:12:32.231Z,1520557952.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:32.262Z,1520557952.262 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1046.784375 min 
2018-03-09T01:12:32.262Z,1520557952.262 [Default:CheckIn:E] Stopped
2018-03-09T01:12:32.262Z,1520557952.262 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-09T01:12:32.262Z,1520557952.262 [Default:CheckIn] Stopped
2018-03-09T01:12:32.263Z,1520557952.263 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-09T01:12:32.263Z,1520557952.263 [Default:CheckIn](INFO): Running loop #106
2018-03-09T01:12:32.263Z,1520557952.263 [Default:CheckIn] Running Loop=106
2018-03-09T01:12:32.263Z,1520557952.263 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-09T01:12:32.263Z,1520557952.263 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-09T01:12:35.499Z,1520557955.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:35.591Z,1520557955.591 [NAL9602](INFO): Powering up
2018-03-09T01:12:35.610Z,1520557955.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:35.973Z,1520557955.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:36.371Z,1520557956.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:36.759Z,1520557956.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:37.179Z,1520557957.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:37.566Z,1520557957.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:37.967Z,1520557957.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:38.370Z,1520557958.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:38.770Z,1520557958.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:39.174Z,1520557959.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:39.570Z,1520557959.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:39.970Z,1520557959.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:40.374Z,1520557960.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:40.769Z,1520557960.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:41.171Z,1520557961.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:41.576Z,1520557961.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:41.969Z,1520557961.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:42.374Z,1520557962.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:42.760Z,1520557962.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:43.158Z,1520557963.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:43.566Z,1520557963.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:43.960Z,1520557963.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:44.380Z,1520557964.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:44.766Z,1520557964.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:45.159Z,1520557965.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:45.562Z,1520557965.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:45.966Z,1520557965.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:46.382Z,1520557966.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:46.758Z,1520557966.758 [NAL9602](INFO): NAL9602 initialized
2018-03-09T01:12:46.793Z,1520557966.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:47.168Z,1520557967.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:47.581Z,1520557967.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:47.985Z,1520557967.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:48.380Z,1520557968.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:48.768Z,1520557968.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:49.172Z,1520557969.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:49.569Z,1520557969.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:49.969Z,1520557969.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:50.370Z,1520557970.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:50.774Z,1520557970.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:51.156Z,1520557971.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:51.565Z,1520557971.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:51.974Z,1520557971.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:52.372Z,1520557972.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:52.775Z,1520557972.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:53.162Z,1520557973.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:53.562Z,1520557973.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:53.979Z,1520557973.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:54.362Z,1520557974.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:54.760Z,1520557974.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:55.173Z,1520557975.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:55.562Z,1520557975.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:55.960Z,1520557975.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:56.373Z,1520557976.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:56.762Z,1520557976.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:57.156Z,1520557977.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:57.558Z,1520557977.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:57.962Z,1520557977.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:58.362Z,1520557978.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:58.770Z,1520557978.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:59.178Z,1520557979.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:59.570Z,1520557979.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:12:59.971Z,1520557979.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:00.370Z,1520557980.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:00.769Z,1520557980.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:01.169Z,1520557981.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:01.570Z,1520557981.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:01.971Z,1520557981.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:02.369Z,1520557982.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:02.769Z,1520557982.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:03.160Z,1520557983.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:03.566Z,1520557983.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:03.962Z,1520557983.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:04.358Z,1520557984.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:04.762Z,1520557984.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:05.170Z,1520557985.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:05.571Z,1520557985.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:05.971Z,1520557985.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:06.368Z,1520557986.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:06.770Z,1520557986.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:07.170Z,1520557987.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:07.570Z,1520557987.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:07.971Z,1520557987.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:08.380Z,1520557988.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:08.769Z,1520557988.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:09.171Z,1520557989.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:09.575Z,1520557989.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:09.965Z,1520557989.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:10.377Z,1520557990.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:10.762Z,1520557990.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:11.166Z,1520557991.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:11.563Z,1520557991.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:11.963Z,1520557991.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:12.363Z,1520557992.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:12.763Z,1520557992.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:13.166Z,1520557993.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:13.569Z,1520557993.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:13.971Z,1520557993.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:14.367Z,1520557994.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:14.768Z,1520557994.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:15.172Z,1520557995.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:15.571Z,1520557995.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:15.971Z,1520557995.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:16.367Z,1520557996.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:16.765Z,1520557996.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:17.174Z,1520557997.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:17.569Z,1520557997.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:17.974Z,1520557997.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:18.374Z,1520557998.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:18.746Z,1520557998.746 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-09T01:13:18.821Z,1520557998.821 [NAL9602](FAULT): received: 
+CSQ:0

OK10, 0, 0, 0, 0

OK
2018-03-09T01:13:18.821Z,1520557998.821 [NAL9602] Data Fault, FailCount= 2
2018-03-09T01:13:18.821Z,1520557998.821 [NAL9602](ERROR): Data Fault
2018-03-09T01:13:18.838Z,1520557998.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:18.898Z,1520557998.898 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-09T01:13:19.162Z,1520557999.162 [NAL9602](INFO): Powering down
2018-03-09T01:13:19.179Z,1520557999.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:19.570Z,1520557999.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:19.970Z,1520557999.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:20.013Z,1520558000.013 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-09T01:13:20.014Z,1520558000.014 [NAL9602] No Fault, FailCount= 2
2018-03-09T01:13:20.381Z,1520558000.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:20.771Z,1520558000.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:21.171Z,1520558001.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:21.578Z,1520558001.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:21.959Z,1520558001.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:22.370Z,1520558002.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:22.769Z,1520558002.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:23.159Z,1520558003.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:23.574Z,1520558003.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:23.970Z,1520558003.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:24.362Z,1520558004.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:24.763Z,1520558004.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:25.162Z,1520558005.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:25.574Z,1520558005.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:25.974Z,1520558005.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:26.382Z,1520558006.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:26.759Z,1520558006.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:27.162Z,1520558007.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:27.562Z,1520558007.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:27.959Z,1520558007.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:28.362Z,1520558008.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:28.782Z,1520558008.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:29.159Z,1520558009.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:29.566Z,1520558009.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:29.962Z,1520558009.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:30.366Z,1520558010.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:30.766Z,1520558010.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:31.182Z,1520558011.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:31.560Z,1520558011.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:31.966Z,1520558011.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:32.362Z,1520558012.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:35.707Z,1520558015.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:35.828Z,1520558015.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:36.204Z,1520558016.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:36.596Z,1520558016.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:36.998Z,1520558016.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:37.398Z,1520558017.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:37.799Z,1520558017.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:38.198Z,1520558018.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:38.598Z,1520558018.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:38.998Z,1520558018.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:39.403Z,1520558019.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:39.814Z,1520558019.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:40.196Z,1520558020.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:40.602Z,1520558020.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:41.002Z,1520558021.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:41.407Z,1520558021.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:41.802Z,1520558021.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:42.217Z,1520558022.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:42.589Z,1520558022.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:42.996Z,1520558022.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:43.395Z,1520558023.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:43.799Z,1520558023.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:44.200Z,1520558024.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:44.611Z,1520558024.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:45.002Z,1520558025.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:45.404Z,1520558025.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:45.803Z,1520558025.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:46.203Z,1520558026.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:46.602Z,1520558026.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:47.002Z,1520558027.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:47.402Z,1520558027.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:47.802Z,1520558027.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:48.202Z,1520558028.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:48.602Z,1520558028.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:49.002Z,1520558029.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:49.378Z,1520558029.378 [NAL9602](INFO): Powering up NAL9602
2018-03-09T01:13:49.401Z,1520558029.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:49.791Z,1520558029.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:50.212Z,1520558030.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:50.623Z,1520558030.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:51.007Z,1520558031.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:51.406Z,1520558031.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:51.802Z,1520558031.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:52.188Z,1520558032.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:52.606Z,1520558032.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:53.002Z,1520558033.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:53.402Z,1520558033.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:53.806Z,1520558033.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:54.213Z,1520558034.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:54.602Z,1520558034.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:55.002Z,1520558035.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:55.414Z,1520558035.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:55.787Z,1520558035.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:56.214Z,1520558036.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:56.594Z,1520558036.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:56.989Z,1520558036.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:57.393Z,1520558037.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:57.821Z,1520558037.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:58.192Z,1520558038.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:58.598Z,1520558038.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:59.010Z,1520558039.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:59.402Z,1520558039.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:13:59.813Z,1520558039.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:00.182Z,1520558040.182 [NAL9602](INFO): NAL9602 initialized
2018-03-09T01:14:00.198Z,1520558040.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:00.648Z,1520558040.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:00.994Z,1520558040.994 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-09T01:14:00.994Z,1520558040.994 [NAL9602] Data Fault, FailCount= 3
2018-03-09T01:14:00.994Z,1520558040.994 [NAL9602](ERROR): Data Fault
2018-03-09T01:14:01.011Z,1520558041.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:01.069Z,1520558041.069 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-09T01:14:01.394Z,1520558041.394 [NAL9602](INFO): Powering down
2018-03-09T01:14:01.411Z,1520558041.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:01.801Z,1520558041.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:02.203Z,1520558042.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:02.262Z,1520558042.262 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-09T01:14:02.262Z,1520558042.262 [NAL9602] No Fault, FailCount= 3
2018-03-09T01:14:02.602Z,1520558042.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:02.998Z,1520558042.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:03.401Z,1520558043.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:03.811Z,1520558043.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:04.218Z,1520558044.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:04.617Z,1520558044.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:05.011Z,1520558045.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:05.391Z,1520558045.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:05.797Z,1520558045.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:06.197Z,1520558046.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:06.606Z,1520558046.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:06.994Z,1520558046.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:07.394Z,1520558047.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:07.794Z,1520558047.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:08.194Z,1520558048.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:08.594Z,1520558048.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:08.994Z,1520558048.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:09.393Z,1520558049.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:09.794Z,1520558049.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:10.197Z,1520558050.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:10.598Z,1520558050.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:11.015Z,1520558051.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:11.398Z,1520558051.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:11.791Z,1520558051.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:12.197Z,1520558052.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:12.597Z,1520558052.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:13.006Z,1520558053.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:13.418Z,1520558053.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:13.805Z,1520558053.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:14.192Z,1520558054.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:14.615Z,1520558054.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:14.995Z,1520558054.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:15.390Z,1520558055.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:15.794Z,1520558055.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:16.194Z,1520558056.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:16.606Z,1520558056.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:16.995Z,1520558056.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:17.394Z,1520558057.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:17.791Z,1520558057.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:18.198Z,1520558058.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:18.594Z,1520558058.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:18.991Z,1520558058.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:19.398Z,1520558059.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:19.794Z,1520558059.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:20.192Z,1520558060.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:20.594Z,1520558060.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:21.002Z,1520558061.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:21.394Z,1520558061.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:21.795Z,1520558061.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:22.194Z,1520558062.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:22.602Z,1520558062.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:23.003Z,1520558063.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:23.401Z,1520558063.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:23.799Z,1520558063.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:24.201Z,1520558064.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:24.603Z,1520558064.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:24.999Z,1520558064.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:25.400Z,1520558065.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:25.802Z,1520558065.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:26.198Z,1520558066.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:26.601Z,1520558066.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:27.003Z,1520558067.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:27.402Z,1520558067.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:27.803Z,1520558067.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:28.202Z,1520558068.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:28.602Z,1520558068.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:29.002Z,1520558069.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:29.402Z,1520558069.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:29.802Z,1520558069.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:30.202Z,1520558070.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:30.602Z,1520558070.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:30.999Z,1520558070.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:31.398Z,1520558071.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:31.782Z,1520558071.782 [NAL9602](INFO): Powering up NAL9602
2018-03-09T01:14:31.811Z,1520558071.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:32.200Z,1520558072.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:32.602Z,1520558072.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:35.869Z,1520558075.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:35.977Z,1520558075.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:36.378Z,1520558076.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:36.771Z,1520558076.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:37.170Z,1520558077.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:37.582Z,1520558077.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:37.971Z,1520558077.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:38.370Z,1520558078.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:38.771Z,1520558078.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:39.176Z,1520558079.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:39.564Z,1520558079.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:39.987Z,1520558079.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:40.362Z,1520558080.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:40.762Z,1520558080.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:41.186Z,1520558081.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:41.562Z,1520558081.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:41.961Z,1520558081.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:42.397Z,1520558082.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:42.750Z,1520558082.750 [NAL9602](INFO): NAL9602 initialized
2018-03-09T01:14:42.767Z,1520558082.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:43.176Z,1520558083.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:43.599Z,1520558083.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:43.981Z,1520558083.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:44.377Z,1520558084.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:44.768Z,1520558084.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:45.183Z,1520558085.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:45.599Z,1520558085.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:46.013Z,1520558086.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:46.371Z,1520558086.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:46.772Z,1520558086.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:47.175Z,1520558087.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:47.575Z,1520558087.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:47.975Z,1520558087.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:48.372Z,1520558088.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:48.774Z,1520558088.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:49.174Z,1520558089.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:49.575Z,1520558089.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:49.981Z,1520558089.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:50.383Z,1520558090.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:50.785Z,1520558090.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:50.810Z,1520558090.810 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T01:14:50.810Z,1520558090.810 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-03-09T01:14:50.810Z,1520558090.810 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T01:14:50.839Z,1520558090.839 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T01:14:51.182Z,1520558091.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:51.238Z,1520558091.238 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T01:14:51.238Z,1520558091.238 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-03-09T01:14:51.567Z,1520558091.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:51.602Z,1520558091.602 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T01:14:51.603Z,1520558091.603 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T01:14:51.603Z,1520558091.603 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T01:14:51.966Z,1520558091.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:52.370Z,1520558092.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:52.774Z,1520558092.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:53.174Z,1520558093.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:53.569Z,1520558093.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:53.970Z,1520558093.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:54.376Z,1520558094.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:54.774Z,1520558094.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:55.181Z,1520558095.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:55.599Z,1520558095.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:55.983Z,1520558095.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:56.387Z,1520558096.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:56.766Z,1520558096.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:57.162Z,1520558097.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:57.562Z,1520558097.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:57.966Z,1520558097.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:58.364Z,1520558098.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:58.766Z,1520558098.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:59.166Z,1520558099.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:59.566Z,1520558099.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:14:59.962Z,1520558099.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:00.390Z,1520558100.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:00.773Z,1520558100.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:01.185Z,1520558101.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:01.587Z,1520558101.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:01.970Z,1520558101.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:02.366Z,1520558102.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:02.784Z,1520558102.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:03.173Z,1520558103.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:03.577Z,1520558103.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:03.982Z,1520558103.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:04.373Z,1520558104.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:04.773Z,1520558104.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:05.176Z,1520558105.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:05.590Z,1520558105.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:05.992Z,1520558105.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:06.391Z,1520558106.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:06.786Z,1520558106.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:07.167Z,1520558107.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:07.582Z,1520558107.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:07.963Z,1520558107.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:08.387Z,1520558108.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:08.767Z,1520558108.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:09.166Z,1520558109.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:09.566Z,1520558109.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:09.989Z,1520558109.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:10.366Z,1520558110.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:10.789Z,1520558110.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:11.190Z,1520558111.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:11.573Z,1520558111.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:11.976Z,1520558111.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:12.375Z,1520558112.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:12.779Z,1520558112.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:13.162Z,1520558113.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:13.575Z,1520558113.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:13.978Z,1520558113.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:14.362Z,1520558114.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:14.780Z,1520558114.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:15.166Z,1520558115.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:15.562Z,1520558115.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:15.990Z,1520558115.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:16.385Z,1520558116.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:16.773Z,1520558116.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:17.196Z,1520558117.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:17.572Z,1520558117.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:17.977Z,1520558117.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:18.383Z,1520558118.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:18.779Z,1520558118.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:19.162Z,1520558119.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:19.580Z,1520558119.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:19.977Z,1520558119.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:20.362Z,1520558120.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:20.766Z,1520558120.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:21.190Z,1520558121.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:21.582Z,1520558121.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:22.001Z,1520558122.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:22.390Z,1520558122.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:22.773Z,1520558122.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:23.178Z,1520558123.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:23.571Z,1520558123.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:23.975Z,1520558123.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:24.375Z,1520558124.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:24.778Z,1520558124.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:25.174Z,1520558125.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:25.575Z,1520558125.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:25.978Z,1520558125.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:26.385Z,1520558126.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:26.791Z,1520558126.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:27.189Z,1520558127.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:27.581Z,1520558127.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:27.975Z,1520558127.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:28.384Z,1520558128.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:28.766Z,1520558128.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:29.170Z,1520558129.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:29.587Z,1520558129.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:29.975Z,1520558129.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:30.375Z,1520558130.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:30.774Z,1520558130.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:31.173Z,1520558131.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:31.587Z,1520558131.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:31.989Z,1520558131.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:32.385Z,1520558132.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:32.785Z,1520558132.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:35.948Z,1520558135.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:36.067Z,1520558136.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:36.509Z,1520558136.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:36.878Z,1520558136.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:37.297Z,1520558137.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:37.704Z,1520558137.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:38.058Z,1520558138.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:38.458Z,1520558138.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:38.854Z,1520558138.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:39.255Z,1520558139.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:39.654Z,1520558139.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:40.058Z,1520558140.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:40.462Z,1520558140.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:40.863Z,1520558140.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:41.261Z,1520558141.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:41.667Z,1520558141.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:42.067Z,1520558142.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:42.481Z,1520558142.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:42.900Z,1520558142.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:43.263Z,1520558143.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:43.663Z,1520558143.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:44.063Z,1520558144.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:44.462Z,1520558144.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:44.863Z,1520558144.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:45.290Z,1520558145.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:45.664Z,1520558145.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:46.064Z,1520558146.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:46.461Z,1520558146.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:46.896Z,1520558146.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:47.283Z,1520558147.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:47.680Z,1520558147.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:48.081Z,1520558148.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:48.454Z,1520558148.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:48.858Z,1520558148.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:49.254Z,1520558149.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:49.654Z,1520558149.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:50.052Z,1520558150.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:50.455Z,1520558150.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:50.872Z,1520558150.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:51.261Z,1520558151.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:51.662Z,1520558151.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:52.082Z,1520558152.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:52.462Z,1520558152.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:52.898Z,1520558152.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:53.301Z,1520558153.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:53.660Z,1520558153.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:54.060Z,1520558154.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:54.464Z,1520558154.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:54.851Z,1520558154.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:55.263Z,1520558155.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:55.665Z,1520558155.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:56.059Z,1520558156.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:56.463Z,1520558156.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:56.856Z,1520558156.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:57.265Z,1520558157.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:57.689Z,1520558157.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:58.069Z,1520558158.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:58.489Z,1520558158.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:58.854Z,1520558158.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:59.256Z,1520558159.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:15:59.731Z,1520558159.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:00.056Z,1520558160.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:00.457Z,1520558160.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:00.855Z,1520558160.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:01.265Z,1520558161.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:01.666Z,1520558161.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:02.059Z,1520558162.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:02.485Z,1520558162.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:02.878Z,1520558162.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:03.265Z,1520558163.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:03.671Z,1520558163.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:04.063Z,1520558164.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:04.462Z,1520558164.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:04.857Z,1520558164.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:05.268Z,1520558165.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:05.648Z,1520558165.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:06.050Z,1520558166.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:06.458Z,1520558166.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:06.852Z,1520558166.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:07.254Z,1520558167.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:07.670Z,1520558167.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:08.061Z,1520558168.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:08.504Z,1520558168.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:08.883Z,1520558168.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:09.258Z,1520558169.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:09.662Z,1520558169.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:10.067Z,1520558170.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:10.466Z,1520558170.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:10.862Z,1520558170.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:11.261Z,1520558171.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:11.648Z,1520558171.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:12.068Z,1520558172.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:12.454Z,1520558172.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:12.868Z,1520558172.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:13.265Z,1520558173.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:13.691Z,1520558173.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:14.090Z,1520558174.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:14.459Z,1520558174.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:14.863Z,1520558174.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:15.258Z,1520558175.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:15.660Z,1520558175.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:16.063Z,1520558176.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:16.452Z,1520558176.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:16.854Z,1520558176.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:17.254Z,1520558177.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:17.650Z,1520558177.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:18.080Z,1520558178.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:18.488Z,1520558178.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:18.864Z,1520558178.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:19.276Z,1520558179.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:19.661Z,1520558179.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:20.055Z,1520558180.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:20.457Z,1520558180.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:20.863Z,1520558180.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:21.261Z,1520558181.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:21.659Z,1520558181.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:22.054Z,1520558182.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:22.458Z,1520558182.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:22.858Z,1520558182.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:23.290Z,1520558183.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:23.697Z,1520558183.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:24.086Z,1520558184.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:24.486Z,1520558184.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:24.861Z,1520558184.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:25.262Z,1520558185.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:25.660Z,1520558185.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:26.059Z,1520558186.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:26.459Z,1520558186.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:26.862Z,1520558186.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:27.267Z,1520558187.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:27.657Z,1520558187.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:28.068Z,1520558188.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:28.487Z,1520558188.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:28.885Z,1520558188.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:29.292Z,1520558189.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:29.666Z,1520558189.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:30.063Z,1520558190.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:30.465Z,1520558190.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:30.864Z,1520558190.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:31.264Z,1520558191.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:31.668Z,1520558191.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:32.067Z,1520558192.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:32.450Z,1520558192.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:32.855Z,1520558192.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:36.163Z,1520558196.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:36.310Z,1520558196.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:36.653Z,1520558196.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:37.057Z,1520558197.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:37.442Z,1520558197.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:37.844Z,1520558197.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:38.242Z,1520558198.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:38.640Z,1520558198.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:39.046Z,1520558199.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:39.443Z,1520558199.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:39.843Z,1520558199.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:40.237Z,1520558200.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:40.643Z,1520558200.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:41.052Z,1520558201.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:41.452Z,1520558201.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:41.858Z,1520558201.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:42.257Z,1520558202.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:42.634Z,1520558202.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:43.034Z,1520558203.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:43.447Z,1520558203.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:43.834Z,1520558203.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:44.234Z,1520558204.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:44.636Z,1520558204.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:45.035Z,1520558205.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:45.435Z,1520558205.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:45.833Z,1520558205.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:46.253Z,1520558206.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:46.657Z,1520558206.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:47.048Z,1520558207.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:47.459Z,1520558207.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:47.834Z,1520558207.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:48.235Z,1520558208.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:48.635Z,1520558208.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:49.035Z,1520558209.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:49.435Z,1520558209.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:49.843Z,1520558209.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:50.239Z,1520558210.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:50.643Z,1520558210.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:51.042Z,1520558211.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:51.449Z,1520558211.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:51.849Z,1520558211.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:52.257Z,1520558212.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:52.657Z,1520558212.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:53.032Z,1520558213.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:53.438Z,1520558213.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:53.834Z,1520558213.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:54.235Z,1520558214.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:54.634Z,1520558214.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:55.034Z,1520558215.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:55.434Z,1520558215.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:55.834Z,1520558215.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:56.234Z,1520558216.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:56.652Z,1520558216.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:57.057Z,1520558217.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:57.458Z,1520558217.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:57.852Z,1520558217.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:58.238Z,1520558218.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:58.634Z,1520558218.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:59.032Z,1520558219.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:59.434Z,1520558219.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:16:59.834Z,1520558219.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:00.238Z,1520558220.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:00.634Z,1520558220.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:01.034Z,1520558221.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:01.434Z,1520558221.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:01.862Z,1520558221.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:02.254Z,1520558222.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:02.657Z,1520558222.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:03.053Z,1520558223.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:03.434Z,1520558223.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:03.832Z,1520558223.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:04.234Z,1520558224.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:04.634Z,1520558224.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:05.032Z,1520558225.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:05.434Z,1520558225.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:05.834Z,1520558225.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:06.238Z,1520558226.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:06.642Z,1520558226.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:07.058Z,1520558227.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:07.458Z,1520558227.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:07.845Z,1520558227.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:08.245Z,1520558228.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:08.635Z,1520558228.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:09.033Z,1520558229.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:09.434Z,1520558229.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:09.834Z,1520558229.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:10.234Z,1520558230.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:10.634Z,1520558230.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:11.038Z,1520558231.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:11.435Z,1520558231.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:11.834Z,1520558231.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:12.258Z,1520558232.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:12.645Z,1520558232.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:13.058Z,1520558233.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:13.457Z,1520558233.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:13.838Z,1520558233.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:14.234Z,1520558234.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:14.638Z,1520558234.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:15.034Z,1520558235.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:15.434Z,1520558235.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:15.834Z,1520558235.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:16.235Z,1520558236.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:16.634Z,1520558236.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:17.032Z,1520558237.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:17.453Z,1520558237.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:17.865Z,1520558237.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:18.253Z,1520558238.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:18.663Z,1520558238.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:19.042Z,1520558239.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:19.442Z,1520558239.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:19.842Z,1520558239.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:20.246Z,1520558240.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:20.642Z,1520558240.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:21.041Z,1520558241.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:21.442Z,1520558241.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:21.837Z,1520558241.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:22.244Z,1520558242.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:22.657Z,1520558242.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:23.041Z,1520558243.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:23.450Z,1520558243.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:23.854Z,1520558243.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:24.250Z,1520558244.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:24.644Z,1520558244.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:25.044Z,1520558245.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:25.443Z,1520558245.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:25.863Z,1520558245.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:26.241Z,1520558246.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:26.630Z,1520558246.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:27.045Z,1520558247.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:27.452Z,1520558247.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:27.846Z,1520558247.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:28.249Z,1520558248.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:28.657Z,1520558248.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:29.053Z,1520558249.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:29.454Z,1520558249.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:29.834Z,1520558249.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:30.234Z,1520558250.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:30.659Z,1520558250.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:31.034Z,1520558251.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:31.430Z,1520558251.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:31.855Z,1520558251.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:32.235Z,1520558252.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:32.268Z,1520558252.268 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-09T01:12:32.3Z
2018-03-09T01:17:32.268Z,1520558252.268 [Default:CheckIn:Read_GPS] Stopped
2018-03-09T01:17:32.268Z,1520558252.268 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-09T01:17:32.646Z,1520558252.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:33.162Z,1520558253.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:36.254Z,1520558256.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:36.388Z,1520558256.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:36.708Z,1520558256.708 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0424.lzma
2018-03-09T01:17:36.734Z,1520558256.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:37.131Z,1520558257.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:37.500Z,1520558257.500 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0424.lzma.bak
2018-03-09T01:17:37.500Z,1520558257.500 [DataOverHttps](INFO): SBD MOMSN=7990843
2018-03-09T01:17:37.539Z,1520558257.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:38.161Z,1520558258.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:38.326Z,1520558258.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:38.747Z,1520558258.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:42.402Z,1520558262.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:42.559Z,1520558262.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:42.953Z,1520558262.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:43.346Z,1520558263.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:43.737Z,1520558263.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:44.149Z,1520558264.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:47.895Z,1520558267.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:48.022Z,1520558268.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:48.362Z,1520558268.362 [DataOverHttps](INFO): Sending 251 bytes from file Logs/20180308T074127/Express0425.lzma
2018-03-09T01:17:48.391Z,1520558268.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:48.794Z,1520558268.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:49.160Z,1520558269.160 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0425.lzma.bak
2018-03-09T01:17:49.160Z,1520558269.160 [DataOverHttps](INFO): SBD MOMSN=7990845
2018-03-09T01:17:49.188Z,1520558269.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:49.849Z,1520558269.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:49.869Z,1520558269.869 [Default:CheckIn:Read_Iridium] Stopped
2018-03-09T01:17:49.869Z,1520558269.869 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-09T01:17:49.869Z,1520558269.869 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-09T01:17:49.972Z,1520558269.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:50.366Z,1520558270.366 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-09T01:17:50.382Z,1520558270.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:54.017Z,1520558274.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:54.036Z,1520558274.036 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T01:17:54.036Z,1520558274.036 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-03-09T01:17:54.036Z,1520558274.036 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T01:17:54.139Z,1520558274.139 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T01:17:54.221Z,1520558274.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:54.286Z,1520558274.286 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T01:17:54.286Z,1520558274.286 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-03-09T01:17:54.585Z,1520558274.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:54.620Z,1520558274.620 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T01:17:54.633Z,1520558274.633 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T01:17:54.633Z,1520558274.633 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T01:17:54.984Z,1520558274.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:55.385Z,1520558275.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:55.786Z,1520558275.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:56.172Z,1520558276.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:56.575Z,1520558276.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:56.974Z,1520558276.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:57.374Z,1520558277.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:57.774Z,1520558277.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:58.175Z,1520558278.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:58.574Z,1520558278.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:58.974Z,1520558278.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:59.374Z,1520558279.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:17:59.770Z,1520558279.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:00.179Z,1520558280.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:00.574Z,1520558280.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:00.971Z,1520558280.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:01.374Z,1520558281.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:01.774Z,1520558281.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:02.171Z,1520558282.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:02.570Z,1520558282.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:02.978Z,1520558282.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:03.374Z,1520558283.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:03.778Z,1520558283.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:04.195Z,1520558284.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:04.574Z,1520558284.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:04.979Z,1520558284.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:05.393Z,1520558285.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:05.769Z,1520558285.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:06.178Z,1520558286.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:06.582Z,1520558286.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:06.974Z,1520558286.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:07.381Z,1520558287.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:07.779Z,1520558287.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:08.178Z,1520558288.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:08.581Z,1520558288.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:08.983Z,1520558288.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:09.379Z,1520558289.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:09.782Z,1520558289.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:10.190Z,1520558290.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:10.577Z,1520558290.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:10.989Z,1520558290.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:11.391Z,1520558291.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:11.781Z,1520558291.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:12.182Z,1520558292.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:12.582Z,1520558292.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:12.979Z,1520558292.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:13.391Z,1520558293.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:13.782Z,1520558293.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:14.179Z,1520558294.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:14.586Z,1520558294.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:14.982Z,1520558294.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:15.379Z,1520558295.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:15.780Z,1520558295.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:16.182Z,1520558296.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:16.583Z,1520558296.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:16.983Z,1520558296.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:17.383Z,1520558297.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:17.782Z,1520558297.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:18.194Z,1520558298.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:18.577Z,1520558298.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:18.971Z,1520558298.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:19.374Z,1520558299.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:19.774Z,1520558299.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:20.170Z,1520558300.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:20.585Z,1520558300.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:20.986Z,1520558300.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:21.370Z,1520558301.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:21.785Z,1520558301.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:22.174Z,1520558302.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:22.570Z,1520558302.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:22.978Z,1520558302.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:23.374Z,1520558303.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:23.774Z,1520558303.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:24.162Z,1520558304.162 [NAL9602](INFO): Powering down
2018-03-09T01:18:24.180Z,1520558304.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:24.594Z,1520558304.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:24.974Z,1520558304.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:25.377Z,1520558305.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:25.774Z,1520558305.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:26.174Z,1520558306.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:26.578Z,1520558306.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:27.007Z,1520558307.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:27.370Z,1520558307.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:27.780Z,1520558307.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:28.175Z,1520558308.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:28.574Z,1520558308.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:28.975Z,1520558308.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:29.375Z,1520558309.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:29.772Z,1520558309.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:30.169Z,1520558310.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:30.596Z,1520558310.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:30.975Z,1520558310.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:31.375Z,1520558311.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:31.775Z,1520558311.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:32.170Z,1520558312.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:32.579Z,1520558312.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:32.987Z,1520558312.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:33.374Z,1520558313.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:33.771Z,1520558313.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:34.174Z,1520558314.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:34.574Z,1520558314.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:34.978Z,1520558314.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:35.382Z,1520558315.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:35.777Z,1520558315.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:36.178Z,1520558316.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:36.582Z,1520558316.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:36.983Z,1520558316.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:37.383Z,1520558317.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:37.786Z,1520558317.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:38.182Z,1520558318.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:38.579Z,1520558318.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:38.991Z,1520558318.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:39.382Z,1520558319.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:39.783Z,1520558319.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:40.178Z,1520558320.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:40.586Z,1520558320.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:41.013Z,1520558321.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:41.383Z,1520558321.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:41.782Z,1520558321.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:42.171Z,1520558322.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:42.586Z,1520558322.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:42.974Z,1520558322.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:43.371Z,1520558323.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:43.774Z,1520558323.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:44.174Z,1520558324.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:44.587Z,1520558324.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:44.999Z,1520558324.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:45.370Z,1520558325.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:45.770Z,1520558325.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:46.195Z,1520558326.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:46.574Z,1520558326.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:46.971Z,1520558326.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:47.394Z,1520558327.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:47.774Z,1520558327.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:48.170Z,1520558328.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:48.574Z,1520558328.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:48.969Z,1520558328.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:49.368Z,1520558329.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:49.774Z,1520558329.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:50.174Z,1520558330.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:50.582Z,1520558330.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:53.872Z,1520558333.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:53.980Z,1520558333.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:54.379Z,1520558334.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:54.749Z,1520558334.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:55.155Z,1520558335.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:55.554Z,1520558335.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:55.958Z,1520558335.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:56.359Z,1520558336.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:56.761Z,1520558336.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:57.158Z,1520558337.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:57.558Z,1520558337.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:57.962Z,1520558337.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:58.365Z,1520558338.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:58.762Z,1520558338.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:59.171Z,1520558339.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:59.566Z,1520558339.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:18:59.959Z,1520558339.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:00.362Z,1520558340.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:00.757Z,1520558340.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:01.158Z,1520558341.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:01.562Z,1520558341.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:01.967Z,1520558341.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:02.357Z,1520558342.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:02.763Z,1520558342.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:03.158Z,1520558343.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:03.550Z,1520558343.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:03.962Z,1520558343.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:04.366Z,1520558344.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:04.763Z,1520558344.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:05.164Z,1520558345.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:05.574Z,1520558345.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:05.947Z,1520558345.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:06.354Z,1520558346.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:06.755Z,1520558346.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:07.151Z,1520558347.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:07.558Z,1520558347.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:07.958Z,1520558347.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:08.350Z,1520558348.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:08.754Z,1520558348.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:09.158Z,1520558349.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:09.551Z,1520558349.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:09.954Z,1520558349.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:10.362Z,1520558350.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:10.758Z,1520558350.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:11.163Z,1520558351.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:11.564Z,1520558351.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:11.957Z,1520558351.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:12.361Z,1520558352.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:12.761Z,1520558352.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:13.163Z,1520558353.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:13.574Z,1520558353.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:13.961Z,1520558353.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:14.350Z,1520558354.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:14.791Z,1520558354.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:15.157Z,1520558355.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:15.550Z,1520558355.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:15.962Z,1520558355.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:16.365Z,1520558356.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:16.750Z,1520558356.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:17.150Z,1520558357.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:17.565Z,1520558357.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:17.950Z,1520558357.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:18.355Z,1520558358.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:18.756Z,1520558358.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:19.154Z,1520558359.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:19.554Z,1520558359.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:19.958Z,1520558359.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:20.353Z,1520558360.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:20.766Z,1520558360.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:21.167Z,1520558361.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:21.562Z,1520558361.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:21.962Z,1520558361.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:22.366Z,1520558362.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:22.749Z,1520558362.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:23.164Z,1520558363.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:23.566Z,1520558363.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:23.971Z,1520558363.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:24.364Z,1520558364.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:24.757Z,1520558364.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:25.155Z,1520558365.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:25.572Z,1520558365.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:25.955Z,1520558365.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:26.355Z,1520558366.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:26.755Z,1520558366.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:27.155Z,1520558367.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:27.555Z,1520558367.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:27.954Z,1520558367.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:28.358Z,1520558368.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:28.753Z,1520558368.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:29.154Z,1520558369.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:29.562Z,1520558369.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:29.959Z,1520558369.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:30.366Z,1520558370.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:30.759Z,1520558370.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:31.158Z,1520558371.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:31.562Z,1520558371.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:31.963Z,1520558371.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:32.358Z,1520558372.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:32.762Z,1520558372.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:33.159Z,1520558373.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:33.558Z,1520558373.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:33.971Z,1520558373.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:34.354Z,1520558374.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:34.751Z,1520558374.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:35.154Z,1520558375.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:35.554Z,1520558375.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:35.953Z,1520558375.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:36.366Z,1520558376.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:36.752Z,1520558376.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:37.150Z,1520558377.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:37.553Z,1520558377.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:37.950Z,1520558377.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:38.350Z,1520558378.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:38.754Z,1520558378.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:39.147Z,1520558379.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:39.554Z,1520558379.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:39.954Z,1520558379.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:40.358Z,1520558380.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:40.782Z,1520558380.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:41.153Z,1520558381.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:41.584Z,1520558381.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:41.956Z,1520558381.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:42.356Z,1520558382.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:42.763Z,1520558382.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:43.163Z,1520558383.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:43.567Z,1520558383.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:43.962Z,1520558383.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:44.364Z,1520558384.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:44.773Z,1520558384.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:45.156Z,1520558385.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:45.566Z,1520558385.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:45.954Z,1520558385.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:46.352Z,1520558386.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:46.754Z,1520558386.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:47.154Z,1520558387.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:47.555Z,1520558387.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:47.986Z,1520558387.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:48.355Z,1520558388.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:48.747Z,1520558388.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:49.166Z,1520558389.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:49.562Z,1520558389.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:49.951Z,1520558389.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:50.371Z,1520558390.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:50.754Z,1520558390.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:53.999Z,1520558393.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:54.141Z,1520558394.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:54.500Z,1520558394.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:54.865Z,1520558394.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:55.302Z,1520558395.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:55.702Z,1520558395.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:56.067Z,1520558396.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:56.497Z,1520558396.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:56.897Z,1520558396.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:57.263Z,1520558397.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:57.687Z,1520558397.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:58.086Z,1520558398.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:58.479Z,1520558398.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:58.880Z,1520558398.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:59.282Z,1520558399.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:19:59.680Z,1520558399.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:00.073Z,1520558400.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:00.520Z,1520558400.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:00.865Z,1520558400.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:01.316Z,1520558401.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:01.689Z,1520558401.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:02.082Z,1520558402.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:02.494Z,1520558402.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:02.905Z,1520558402.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:03.299Z,1520558403.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:03.684Z,1520558403.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:04.096Z,1520558404.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:04.497Z,1520558404.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:04.892Z,1520558404.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:05.281Z,1520558405.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:05.677Z,1520558405.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:06.084Z,1520558406.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:06.479Z,1520558406.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:06.867Z,1520558406.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:07.273Z,1520558407.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:07.676Z,1520558407.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:08.096Z,1520558408.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:08.476Z,1520558408.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:08.909Z,1520558408.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:09.302Z,1520558409.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:09.696Z,1520558409.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:10.110Z,1520558410.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:10.479Z,1520558410.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:10.915Z,1520558410.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:11.285Z,1520558411.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:11.708Z,1520558411.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:12.091Z,1520558412.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:12.487Z,1520558412.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:12.866Z,1520558412.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:13.292Z,1520558413.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:13.693Z,1520558413.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:14.066Z,1520558414.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:14.486Z,1520558414.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:14.885Z,1520558414.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:15.325Z,1520558415.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:15.668Z,1520558415.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:16.101Z,1520558416.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:16.490Z,1520558416.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:16.887Z,1520558416.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:17.293Z,1520558417.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:17.717Z,1520558417.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:18.093Z,1520558418.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:18.477Z,1520558418.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:18.893Z,1520558418.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:19.301Z,1520558419.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:19.683Z,1520558419.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:20.066Z,1520558420.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:20.482Z,1520558420.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:20.883Z,1520558420.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:21.288Z,1520558421.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:21.682Z,1520558421.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:22.073Z,1520558422.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:22.476Z,1520558422.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:22.867Z,1520558422.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:23.272Z,1520558423.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:23.716Z,1520558423.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:24.067Z,1520558424.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:24.486Z,1520558424.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:24.886Z,1520558424.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:25.267Z,1520558425.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:25.702Z,1520558425.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:26.085Z,1520558426.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:26.500Z,1520558426.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:26.885Z,1520558426.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:27.287Z,1520558427.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:27.681Z,1520558427.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:28.079Z,1520558428.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:28.480Z,1520558428.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:28.866Z,1520558428.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:29.277Z,1520558429.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:29.672Z,1520558429.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:30.098Z,1520558430.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:30.479Z,1520558430.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:30.905Z,1520558430.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:31.267Z,1520558431.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:31.693Z,1520558431.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:32.066Z,1520558432.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:32.507Z,1520558432.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:32.889Z,1520558432.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:33.279Z,1520558433.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:33.697Z,1520558433.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:34.106Z,1520558434.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:34.485Z,1520558434.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:34.884Z,1520558434.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:35.286Z,1520558435.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:35.684Z,1520558435.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:36.079Z,1520558436.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:36.478Z,1520558436.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:36.880Z,1520558436.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:37.266Z,1520558437.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:37.713Z,1520558437.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:38.079Z,1520558438.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:38.516Z,1520558438.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:38.897Z,1520558438.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:39.282Z,1520558439.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:39.693Z,1520558439.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:40.107Z,1520558440.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:40.499Z,1520558440.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:40.880Z,1520558440.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:41.297Z,1520558441.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:41.705Z,1520558441.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:42.085Z,1520558442.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:42.488Z,1520558442.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:42.878Z,1520558442.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:43.279Z,1520558443.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:43.690Z,1520558443.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:44.066Z,1520558444.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:44.466Z,1520558444.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:44.884Z,1520558444.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:45.266Z,1520558445.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:45.666Z,1520558445.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:46.107Z,1520558446.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:46.481Z,1520558446.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:46.867Z,1520558446.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:47.288Z,1520558447.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:47.701Z,1520558447.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:48.104Z,1520558448.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:48.489Z,1520558448.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:48.901Z,1520558448.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:49.285Z,1520558449.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:49.686Z,1520558449.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:50.077Z,1520558450.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:50.485Z,1520558450.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:50.887Z,1520558450.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:54.141Z,1520558454.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:54.252Z,1520558454.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:54.647Z,1520558454.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:54.682Z,1520558454.682 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T01:20:54.682Z,1520558454.682 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-03-09T01:20:54.683Z,1520558454.683 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T01:20:54.699Z,1520558454.699 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T01:20:55.043Z,1520558455.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:55.071Z,1520558455.071 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T01:20:55.071Z,1520558455.071 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-03-09T01:20:55.454Z,1520558455.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:55.472Z,1520558455.472 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T01:20:55.472Z,1520558455.472 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T01:20:55.473Z,1520558455.473 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T01:20:55.858Z,1520558455.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:56.254Z,1520558456.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:56.653Z,1520558456.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:57.049Z,1520558457.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:57.446Z,1520558457.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:57.846Z,1520558457.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:58.247Z,1520558458.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:58.653Z,1520558458.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:59.043Z,1520558459.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:59.459Z,1520558459.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:20:59.846Z,1520558459.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:00.251Z,1520558460.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:00.659Z,1520558460.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:01.050Z,1520558461.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:01.438Z,1520558461.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:01.861Z,1520558461.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:02.239Z,1520558462.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:02.654Z,1520558462.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:03.051Z,1520558463.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:03.450Z,1520558463.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:03.839Z,1520558463.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:04.259Z,1520558464.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:04.650Z,1520558464.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:05.039Z,1520558465.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:05.455Z,1520558465.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:05.838Z,1520558465.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:06.242Z,1520558466.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:06.642Z,1520558466.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:07.043Z,1520558467.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:07.438Z,1520558467.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:07.862Z,1520558467.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:08.238Z,1520558468.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:08.638Z,1520558468.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:09.043Z,1520558469.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:09.438Z,1520558469.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:09.835Z,1520558469.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:10.246Z,1520558470.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:10.638Z,1520558470.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:11.046Z,1520558471.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:11.459Z,1520558471.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:11.846Z,1520558471.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:12.243Z,1520558472.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:12.647Z,1520558472.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:13.043Z,1520558473.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:13.447Z,1520558473.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:13.843Z,1520558473.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:14.238Z,1520558474.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:14.646Z,1520558474.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:15.063Z,1520558475.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:15.442Z,1520558475.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:15.840Z,1520558475.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:16.242Z,1520558476.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:16.646Z,1520558476.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:17.040Z,1520558477.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:17.438Z,1520558477.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:17.846Z,1520558477.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:18.246Z,1520558478.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:18.647Z,1520558478.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:19.043Z,1520558479.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:19.450Z,1520558479.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:19.852Z,1520558479.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:20.251Z,1520558480.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:20.650Z,1520558480.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:21.059Z,1520558481.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:21.453Z,1520558481.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:21.847Z,1520558481.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:22.259Z,1520558482.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:22.654Z,1520558482.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:23.046Z,1520558483.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:23.451Z,1520558483.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:23.853Z,1520558483.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:24.254Z,1520558484.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:24.650Z,1520558484.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:25.054Z,1520558485.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:25.447Z,1520558485.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:25.850Z,1520558485.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:26.245Z,1520558486.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:26.650Z,1520558486.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:27.050Z,1520558487.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:27.450Z,1520558487.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:27.846Z,1520558487.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:28.259Z,1520558488.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:28.650Z,1520558488.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:29.049Z,1520558489.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:29.448Z,1520558489.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:29.850Z,1520558489.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:30.255Z,1520558490.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:30.650Z,1520558490.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:31.050Z,1520558491.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:31.446Z,1520558491.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:31.849Z,1520558491.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:32.255Z,1520558492.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:32.654Z,1520558492.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:33.051Z,1520558493.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:33.450Z,1520558493.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:33.847Z,1520558493.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:34.259Z,1520558494.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:34.659Z,1520558494.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:35.048Z,1520558495.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:35.459Z,1520558495.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:35.849Z,1520558495.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:36.254Z,1520558496.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:36.650Z,1520558496.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:37.048Z,1520558497.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:37.454Z,1520558497.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:37.851Z,1520558497.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:38.254Z,1520558498.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:38.649Z,1520558498.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:39.049Z,1520558499.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:39.454Z,1520558499.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:39.838Z,1520558499.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:40.242Z,1520558500.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:40.653Z,1520558500.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:41.042Z,1520558501.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:41.442Z,1520558501.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:41.871Z,1520558501.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:42.250Z,1520558502.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:42.666Z,1520558502.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:43.052Z,1520558503.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:43.450Z,1520558503.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:43.850Z,1520558503.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:44.252Z,1520558504.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:44.653Z,1520558504.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:45.073Z,1520558505.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:45.480Z,1520558505.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:45.842Z,1520558505.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:46.276Z,1520558506.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:46.646Z,1520558506.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:47.042Z,1520558507.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:47.453Z,1520558507.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:47.852Z,1520558507.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:48.250Z,1520558508.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:48.651Z,1520558508.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:49.051Z,1520558509.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:49.452Z,1520558509.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:49.853Z,1520558509.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:50.255Z,1520558510.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:50.647Z,1520558510.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:51.053Z,1520558511.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:54.225Z,1520558514.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:54.350Z,1520558514.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:54.728Z,1520558514.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:55.120Z,1520558515.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:55.524Z,1520558515.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:55.930Z,1520558515.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:56.321Z,1520558516.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:56.724Z,1520558516.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:57.133Z,1520558517.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:57.530Z,1520558517.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:57.924Z,1520558517.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:58.324Z,1520558518.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:58.722Z,1520558518.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:59.118Z,1520558519.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:59.522Z,1520558519.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:21:59.919Z,1520558519.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:00.323Z,1520558520.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:00.722Z,1520558520.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:01.119Z,1520558521.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:01.522Z,1520558521.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:01.923Z,1520558521.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:02.323Z,1520558522.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:02.723Z,1520558522.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:03.134Z,1520558523.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:03.514Z,1520558523.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:03.914Z,1520558523.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:04.334Z,1520558524.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:04.711Z,1520558524.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:05.114Z,1520558525.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:05.514Z,1520558525.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:05.911Z,1520558525.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:06.314Z,1520558526.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:06.714Z,1520558526.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:07.115Z,1520558527.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:07.514Z,1520558527.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:07.556Z,1520558527.556 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-09T01:22:07.914Z,1520558527.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:08.313Z,1520558528.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:08.714Z,1520558528.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:09.114Z,1520558529.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:09.518Z,1520558529.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:09.914Z,1520558529.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:10.314Z,1520558530.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:10.711Z,1520558530.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:11.114Z,1520558531.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:11.514Z,1520558531.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:11.912Z,1520558531.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:12.318Z,1520558532.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:12.718Z,1520558532.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:13.111Z,1520558533.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:13.514Z,1520558533.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:13.919Z,1520558533.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:14.323Z,1520558534.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:14.723Z,1520558534.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:15.122Z,1520558535.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:15.522Z,1520558535.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:15.926Z,1520558535.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:16.331Z,1520558536.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:16.711Z,1520558536.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:17.123Z,1520558537.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:17.523Z,1520558537.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:17.912Z,1520558537.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:18.326Z,1520558538.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:18.884Z,1520558538.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:19.111Z,1520558539.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:19.527Z,1520558539.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:19.921Z,1520558539.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:20.315Z,1520558540.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:20.749Z,1520558540.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:21.115Z,1520558541.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:21.519Z,1520558541.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:21.923Z,1520558541.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:22.323Z,1520558542.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:22.719Z,1520558542.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:23.119Z,1520558543.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:23.523Z,1520558543.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:23.917Z,1520558543.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:24.320Z,1520558544.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:24.722Z,1520558544.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:25.118Z,1520558545.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:25.520Z,1520558545.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:25.910Z,1520558545.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:26.311Z,1520558546.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:26.717Z,1520558546.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:27.126Z,1520558547.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:27.510Z,1520558547.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:27.914Z,1520558547.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:28.314Z,1520558548.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:28.726Z,1520558548.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:29.134Z,1520558549.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:29.510Z,1520558549.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:29.910Z,1520558549.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:30.334Z,1520558550.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:30.714Z,1520558550.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:31.113Z,1520558551.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:31.534Z,1520558551.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:31.910Z,1520558551.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:32.310Z,1520558552.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:32.714Z,1520558552.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:33.111Z,1520558553.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:33.518Z,1520558553.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:33.918Z,1520558553.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:34.319Z,1520558554.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:34.721Z,1520558554.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:35.130Z,1520558555.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:35.523Z,1520558555.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:35.924Z,1520558555.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:36.327Z,1520558556.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:36.724Z,1520558556.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:37.120Z,1520558557.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:37.522Z,1520558557.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:37.919Z,1520558557.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:38.318Z,1520558558.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:38.722Z,1520558558.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:39.119Z,1520558559.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:39.526Z,1520558559.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:39.923Z,1520558559.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:40.319Z,1520558560.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:40.721Z,1520558560.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:41.122Z,1520558561.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:41.517Z,1520558561.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:41.922Z,1520558561.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:42.322Z,1520558562.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:42.723Z,1520558562.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:43.123Z,1520558563.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:43.534Z,1520558563.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:43.913Z,1520558563.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:44.310Z,1520558564.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:44.714Z,1520558564.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:45.114Z,1520558565.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:45.510Z,1520558565.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:45.914Z,1520558565.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:46.309Z,1520558566.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:46.710Z,1520558566.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:47.110Z,1520558567.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:47.518Z,1520558567.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:47.911Z,1520558567.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:48.314Z,1520558568.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:48.714Z,1520558568.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:49.111Z,1520558569.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:49.515Z,1520558569.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:49.914Z,1520558569.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:50.314Z,1520558570.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:50.342Z,1520558570.342 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-09T01:22:50.342Z,1520558570.342 [Default:CheckIn:C.Wait] Stopped
2018-03-09T01:22:50.343Z,1520558570.343 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-09T01:22:50.343Z,1520558570.343 [Default:CheckIn:D] Running Loop=1
2018-03-09T01:22:50.726Z,1520558570.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:50.756Z,1520558570.756 [Default:CheckIn:D] Stopped
2018-03-09T01:22:50.757Z,1520558570.757 [Default:CheckIn:E] Running Loop=1
2018-03-09T01:22:51.114Z,1520558571.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:51.156Z,1520558571.156 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1057.099219 min 
2018-03-09T01:22:51.156Z,1520558571.156 [Default:CheckIn:E] Stopped
2018-03-09T01:22:51.156Z,1520558571.156 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-09T01:22:51.156Z,1520558571.156 [Default:CheckIn] Stopped
2018-03-09T01:22:51.157Z,1520558571.157 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-09T01:22:51.157Z,1520558571.157 [Default:CheckIn](INFO): Running loop #107
2018-03-09T01:22:51.157Z,1520558571.157 [Default:CheckIn] Running Loop=107
2018-03-09T01:22:51.157Z,1520558571.157 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-09T01:22:51.157Z,1520558571.157 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-09T01:22:54.278Z,1520558574.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:54.383Z,1520558574.383 [NAL9602](INFO): Powering up
2018-03-09T01:22:54.404Z,1520558574.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:54.761Z,1520558574.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:55.154Z,1520558575.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:55.563Z,1520558575.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:55.956Z,1520558575.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:56.359Z,1520558576.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:56.747Z,1520558576.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:57.149Z,1520558577.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:57.550Z,1520558577.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:57.950Z,1520558577.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:58.370Z,1520558578.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:58.750Z,1520558578.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:59.147Z,1520558579.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:59.554Z,1520558579.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:22:59.954Z,1520558579.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:00.347Z,1520558580.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:00.754Z,1520558580.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:01.146Z,1520558581.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:01.554Z,1520558581.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:01.949Z,1520558581.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:02.350Z,1520558582.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:02.744Z,1520558582.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:03.151Z,1520558583.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:03.556Z,1520558583.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:03.951Z,1520558583.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:04.355Z,1520558584.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:04.759Z,1520558584.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:05.162Z,1520558585.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:05.534Z,1520558585.534 [NAL9602](INFO): NAL9602 initialized
2018-03-09T01:23:05.558Z,1520558585.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:05.962Z,1520558585.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:06.369Z,1520558586.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:06.769Z,1520558586.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:07.169Z,1520558587.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:07.548Z,1520558587.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:07.955Z,1520558587.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:08.350Z,1520558588.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:08.749Z,1520558588.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:09.170Z,1520558589.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:09.549Z,1520558589.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:09.950Z,1520558589.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:10.350Z,1520558590.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:10.756Z,1520558590.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:11.151Z,1520558591.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:11.560Z,1520558591.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:11.960Z,1520558591.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:12.361Z,1520558592.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:12.760Z,1520558592.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:13.163Z,1520558593.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:13.562Z,1520558593.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:13.964Z,1520558593.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:14.360Z,1520558594.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:14.761Z,1520558594.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:15.160Z,1520558595.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:15.560Z,1520558595.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:15.963Z,1520558595.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:16.353Z,1520558596.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:16.759Z,1520558596.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:17.148Z,1520558597.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:17.553Z,1520558597.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:17.959Z,1520558597.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:18.357Z,1520558598.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:18.753Z,1520558598.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:19.170Z,1520558599.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:19.549Z,1520558599.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:19.950Z,1520558599.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:20.346Z,1520558600.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:20.748Z,1520558600.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:21.146Z,1520558601.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:21.559Z,1520558601.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:21.951Z,1520558601.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:22.362Z,1520558602.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:22.770Z,1520558602.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:23.151Z,1520558603.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:23.555Z,1520558603.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:23.959Z,1520558603.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:24.357Z,1520558604.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:24.757Z,1520558604.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:25.158Z,1520558605.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:25.563Z,1520558605.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:25.958Z,1520558605.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:26.359Z,1520558606.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:26.748Z,1520558606.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:27.161Z,1520558607.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:27.550Z,1520558607.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:27.948Z,1520558607.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:28.353Z,1520558608.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:28.754Z,1520558608.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:29.149Z,1520558609.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:29.550Z,1520558609.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:29.955Z,1520558609.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:30.358Z,1520558610.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:30.755Z,1520558610.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:31.156Z,1520558611.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:31.555Z,1520558611.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:31.960Z,1520558611.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:32.357Z,1520558612.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:32.757Z,1520558612.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:33.157Z,1520558613.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:33.558Z,1520558613.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:33.957Z,1520558613.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:34.355Z,1520558614.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:34.756Z,1520558614.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:35.157Z,1520558615.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:35.553Z,1520558615.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:35.957Z,1520558615.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:36.360Z,1520558616.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:36.753Z,1520558616.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:37.150Z,1520558617.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:37.538Z,1520558617.538 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-09T01:23:37.613Z,1520558617.613 [NAL9602](FAULT): received: 
+CSQ:0

OK10, 0, 0, 0, 0

OK
2018-03-09T01:23:37.613Z,1520558617.613 [NAL9602] Data Fault, FailCount= 4
2018-03-09T01:23:37.613Z,1520558617.613 [NAL9602](ERROR): Data Fault
2018-03-09T01:23:37.630Z,1520558617.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:37.693Z,1520558617.693 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-09T01:23:37.934Z,1520558617.934 [NAL9602](INFO): Powering down
2018-03-09T01:23:37.952Z,1520558617.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:38.350Z,1520558618.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:38.750Z,1520558618.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:38.810Z,1520558618.810 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-09T01:23:38.810Z,1520558618.810 [NAL9602] No Fault, FailCount= 4
2018-03-09T01:23:39.150Z,1520558619.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:39.554Z,1520558619.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:39.947Z,1520558619.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:40.346Z,1520558620.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:40.754Z,1520558620.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:41.147Z,1520558621.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:41.551Z,1520558621.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:41.950Z,1520558621.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:42.352Z,1520558622.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:42.770Z,1520558622.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:43.152Z,1520558623.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:43.550Z,1520558623.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:43.984Z,1520558623.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:44.360Z,1520558624.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:44.750Z,1520558624.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:45.176Z,1520558625.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:45.568Z,1520558625.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:45.956Z,1520558625.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:46.356Z,1520558626.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:46.756Z,1520558626.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:47.161Z,1520558627.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:47.558Z,1520558627.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:47.957Z,1520558627.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:48.358Z,1520558628.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:48.770Z,1520558628.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:49.154Z,1520558629.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:49.546Z,1520558629.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:49.946Z,1520558629.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:50.354Z,1520558630.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:50.754Z,1520558630.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:51.181Z,1520558631.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:54.394Z,1520558634.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:54.512Z,1520558634.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:54.913Z,1520558634.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:55.310Z,1520558635.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:55.707Z,1520558635.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:55.726Z,1520558635.726 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T01:23:55.727Z,1520558635.727 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-03-09T01:23:55.727Z,1520558635.727 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T01:23:55.759Z,1520558635.759 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T01:23:56.102Z,1520558636.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:56.130Z,1520558636.130 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T01:23:56.130Z,1520558636.130 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-03-09T01:23:56.500Z,1520558636.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:56.534Z,1520558636.534 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T01:23:56.534Z,1520558636.534 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T01:23:56.535Z,1520558636.535 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T01:23:56.939Z,1520558636.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:57.298Z,1520558637.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:57.731Z,1520558637.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:58.098Z,1520558638.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:58.509Z,1520558638.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:58.924Z,1520558638.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:59.328Z,1520558639.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:23:59.736Z,1520558639.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:00.113Z,1520558640.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:00.518Z,1520558640.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:00.909Z,1520558640.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:01.310Z,1520558641.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:01.706Z,1520558641.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:02.106Z,1520558642.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:02.514Z,1520558642.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:02.903Z,1520558642.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:03.307Z,1520558643.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:03.703Z,1520558643.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:04.148Z,1520558644.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:04.501Z,1520558644.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:04.913Z,1520558644.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:05.323Z,1520558645.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:05.706Z,1520558645.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:06.117Z,1520558646.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:06.527Z,1520558646.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:06.927Z,1520558646.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:07.289Z,1520558647.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:07.719Z,1520558647.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:08.102Z,1520558648.102 [NAL9602](INFO): Powering up NAL9602
2018-03-09T01:24:08.120Z,1520558648.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:08.515Z,1520558648.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:08.910Z,1520558648.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:09.298Z,1520558649.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:09.714Z,1520558649.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:10.102Z,1520558650.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:10.498Z,1520558650.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:10.898Z,1520558650.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:11.298Z,1520558651.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:11.739Z,1520558651.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:12.092Z,1520558652.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:12.546Z,1520558652.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:12.919Z,1520558652.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:13.299Z,1520558653.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:13.719Z,1520558653.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:14.133Z,1520558654.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:14.531Z,1520558654.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:14.911Z,1520558654.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:15.331Z,1520558655.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:15.710Z,1520558655.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:16.111Z,1520558656.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:16.499Z,1520558656.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:16.900Z,1520558656.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:17.302Z,1520558657.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:17.703Z,1520558657.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:18.098Z,1520558658.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:18.501Z,1520558658.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:18.947Z,1520558658.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:19.287Z,1520558659.287 [NAL9602](INFO): NAL9602 initialized
2018-03-09T01:24:19.303Z,1520558659.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:19.745Z,1520558659.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:20.130Z,1520558660.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:20.529Z,1520558660.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:20.945Z,1520558660.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:21.329Z,1520558661.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:21.718Z,1520558661.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:22.123Z,1520558662.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:22.517Z,1520558662.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:22.925Z,1520558662.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:23.309Z,1520558663.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:23.712Z,1520558663.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:24.114Z,1520558664.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:24.512Z,1520558664.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:24.905Z,1520558664.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:25.310Z,1520558665.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:25.738Z,1520558665.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:26.105Z,1520558666.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:26.542Z,1520558666.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:26.920Z,1520558666.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:27.326Z,1520558667.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:27.728Z,1520558667.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:28.141Z,1520558668.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:28.532Z,1520558668.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:28.920Z,1520558668.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:29.324Z,1520558669.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:29.721Z,1520558669.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:30.110Z,1520558670.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:30.502Z,1520558670.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:30.908Z,1520558670.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:31.307Z,1520558671.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:31.706Z,1520558671.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:32.102Z,1520558672.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:32.513Z,1520558672.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:32.949Z,1520558672.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:33.313Z,1520558673.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:33.742Z,1520558673.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:34.112Z,1520558674.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:34.512Z,1520558674.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:34.910Z,1520558674.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:35.332Z,1520558675.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:35.729Z,1520558675.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:36.104Z,1520558676.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:36.514Z,1520558676.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:36.932Z,1520558676.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:37.306Z,1520558677.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:37.725Z,1520558677.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:38.109Z,1520558678.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:38.521Z,1520558678.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:38.922Z,1520558678.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:39.307Z,1520558679.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:39.711Z,1520558679.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:40.100Z,1520558680.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:40.530Z,1520558680.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:40.908Z,1520558680.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:41.334Z,1520558681.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:41.719Z,1520558681.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:42.107Z,1520558682.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:42.515Z,1520558682.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:42.943Z,1520558682.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:43.343Z,1520558683.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:43.734Z,1520558683.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:44.140Z,1520558684.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:44.510Z,1520558684.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:44.907Z,1520558684.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:45.302Z,1520558685.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:45.717Z,1520558685.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:46.107Z,1520558686.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:46.506Z,1520558686.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:46.902Z,1520558686.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:47.301Z,1520558687.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:47.730Z,1520558687.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:48.108Z,1520558688.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:48.553Z,1520558688.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:48.931Z,1520558688.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:49.329Z,1520558689.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:49.726Z,1520558689.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:50.128Z,1520558690.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:50.520Z,1520558690.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:50.922Z,1520558690.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:51.309Z,1520558691.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:54.445Z,1520558694.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:54.610Z,1520558694.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:55.001Z,1520558695.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:55.401Z,1520558695.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:55.786Z,1520558695.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:56.194Z,1520558696.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:56.588Z,1520558696.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:56.987Z,1520558696.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:57.388Z,1520558697.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:57.791Z,1520558697.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:58.187Z,1520558698.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:58.591Z,1520558698.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:58.991Z,1520558698.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:59.396Z,1520558699.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:24:59.800Z,1520558699.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:00.202Z,1520558700.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:00.601Z,1520558700.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:00.991Z,1520558700.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:01.393Z,1520558701.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:01.780Z,1520558701.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:02.192Z,1520558702.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:02.591Z,1520558702.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:02.976Z,1520558702.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:03.404Z,1520558703.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:03.792Z,1520558703.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:04.185Z,1520558704.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:04.600Z,1520558704.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:05.001Z,1520558705.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:05.395Z,1520558705.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:05.805Z,1520558705.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:06.187Z,1520558706.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:06.580Z,1520558706.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:06.982Z,1520558706.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:07.382Z,1520558707.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:07.782Z,1520558707.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:08.183Z,1520558708.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:08.582Z,1520558708.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:08.982Z,1520558708.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:09.403Z,1520558709.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:09.806Z,1520558709.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:10.193Z,1520558710.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:10.613Z,1520558710.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:11.002Z,1520558711.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:11.378Z,1520558711.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:11.786Z,1520558711.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:12.206Z,1520558712.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:12.582Z,1520558712.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:12.982Z,1520558712.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:13.382Z,1520558713.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:13.780Z,1520558713.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:14.182Z,1520558714.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:14.583Z,1520558714.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:14.993Z,1520558714.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:15.405Z,1520558715.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:15.805Z,1520558715.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:16.193Z,1520558716.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:16.588Z,1520558716.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:16.991Z,1520558716.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:17.380Z,1520558717.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:17.795Z,1520558717.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:18.191Z,1520558718.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:18.595Z,1520558718.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:18.990Z,1520558718.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:19.391Z,1520558719.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:19.790Z,1520558719.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:20.196Z,1520558720.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:20.601Z,1520558720.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:21.001Z,1520558721.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:21.401Z,1520558721.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:21.792Z,1520558721.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:22.180Z,1520558722.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:22.592Z,1520558722.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:22.992Z,1520558722.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:23.380Z,1520558723.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:23.782Z,1520558723.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:24.183Z,1520558724.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:24.580Z,1520558724.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:24.982Z,1520558724.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:25.402Z,1520558725.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:25.800Z,1520558725.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:26.205Z,1520558726.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:26.602Z,1520558726.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:26.980Z,1520558726.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:27.387Z,1520558727.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:27.783Z,1520558727.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:28.181Z,1520558728.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:28.583Z,1520558728.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:28.983Z,1520558728.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:29.384Z,1520558729.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:29.793Z,1520558729.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:30.193Z,1520558730.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:30.595Z,1520558730.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:31.010Z,1520558731.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:31.401Z,1520558731.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:31.801Z,1520558731.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:32.182Z,1520558732.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:32.595Z,1520558732.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:32.980Z,1520558732.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:33.382Z,1520558733.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:33.782Z,1520558733.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:34.179Z,1520558734.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:34.586Z,1520558734.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:34.979Z,1520558734.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:35.382Z,1520558735.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:35.801Z,1520558735.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:36.202Z,1520558736.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:36.601Z,1520558736.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:36.997Z,1520558736.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:37.382Z,1520558737.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:37.782Z,1520558737.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:38.182Z,1520558738.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:38.582Z,1520558738.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:38.980Z,1520558738.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:39.382Z,1520558739.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:39.790Z,1520558739.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:40.180Z,1520558740.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:40.587Z,1520558740.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:41.001Z,1520558741.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:41.397Z,1520558741.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:41.806Z,1520558741.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:42.221Z,1520558742.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:42.592Z,1520558742.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:43.007Z,1520558743.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:43.393Z,1520558743.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:43.784Z,1520558743.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:44.188Z,1520558744.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:44.592Z,1520558744.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:44.994Z,1520558744.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:45.391Z,1520558745.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:45.824Z,1520558745.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:46.203Z,1520558746.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:46.600Z,1520558746.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:47.006Z,1520558747.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:47.393Z,1520558747.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:47.782Z,1520558747.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:48.183Z,1520558748.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:48.586Z,1520558748.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:48.982Z,1520558748.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:49.383Z,1520558749.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:49.782Z,1520558749.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:50.183Z,1520558750.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:50.582Z,1520558750.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:50.983Z,1520558750.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:51.393Z,1520558751.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:54.893Z,1520558754.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:55.029Z,1520558755.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:55.389Z,1520558755.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:55.800Z,1520558755.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:56.174Z,1520558756.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:56.576Z,1520558756.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:56.978Z,1520558756.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:57.371Z,1520558757.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:57.778Z,1520558757.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:58.180Z,1520558758.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:58.579Z,1520558758.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:58.984Z,1520558758.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:59.379Z,1520558759.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:25:59.784Z,1520558759.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:00.185Z,1520558760.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:00.586Z,1520558760.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:00.982Z,1520558760.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:01.370Z,1520558761.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:01.770Z,1520558761.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:02.165Z,1520558762.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:02.588Z,1520558762.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:02.967Z,1520558762.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:03.368Z,1520558763.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:03.768Z,1520558763.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:04.166Z,1520558764.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:04.567Z,1520558764.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:04.977Z,1520558764.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:05.377Z,1520558765.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:05.778Z,1520558765.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:06.189Z,1520558766.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:06.566Z,1520558766.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:06.960Z,1520558766.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:07.370Z,1520558767.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:07.766Z,1520558767.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:08.164Z,1520558768.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:08.574Z,1520558768.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:08.974Z,1520558768.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:09.371Z,1520558769.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:09.772Z,1520558769.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:10.185Z,1520558770.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:10.583Z,1520558770.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:10.993Z,1520558770.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:11.388Z,1520558771.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:11.762Z,1520558771.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:12.177Z,1520558772.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:12.566Z,1520558772.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:12.962Z,1520558772.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:13.367Z,1520558773.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:13.766Z,1520558773.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:14.160Z,1520558774.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:14.570Z,1520558774.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:14.962Z,1520558774.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:15.381Z,1520558775.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:15.789Z,1520558775.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:16.187Z,1520558776.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:16.577Z,1520558776.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:16.967Z,1520558776.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:17.366Z,1520558777.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:17.770Z,1520558777.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:18.188Z,1520558778.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:18.587Z,1520558778.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:18.964Z,1520558778.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:19.386Z,1520558779.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:19.767Z,1520558779.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:20.164Z,1520558780.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:20.586Z,1520558780.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:20.983Z,1520558780.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:21.377Z,1520558781.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:21.777Z,1520558781.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:22.162Z,1520558782.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:22.566Z,1520558782.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:22.978Z,1520558782.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:23.372Z,1520558783.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:23.770Z,1520558783.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:24.178Z,1520558784.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:24.572Z,1520558784.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:24.969Z,1520558784.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:25.378Z,1520558785.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:25.781Z,1520558785.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:26.176Z,1520558786.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:26.581Z,1520558786.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:26.981Z,1520558786.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:27.360Z,1520558787.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:27.779Z,1520558787.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:28.175Z,1520558788.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:28.579Z,1520558788.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:28.969Z,1520558788.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:29.371Z,1520558789.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:29.767Z,1520558789.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:30.166Z,1520558790.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:30.567Z,1520558790.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:30.977Z,1520558790.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:31.377Z,1520558791.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:31.792Z,1520558791.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:32.178Z,1520558792.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:32.574Z,1520558792.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:32.967Z,1520558792.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:33.366Z,1520558793.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:33.766Z,1520558793.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:34.167Z,1520558794.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:34.566Z,1520558794.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:34.966Z,1520558794.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:35.375Z,1520558795.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:35.767Z,1520558795.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:36.193Z,1520558796.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:36.590Z,1520558796.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:36.985Z,1520558796.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:37.385Z,1520558797.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:37.775Z,1520558797.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:38.167Z,1520558798.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:38.575Z,1520558798.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:38.976Z,1520558798.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:39.366Z,1520558799.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:39.773Z,1520558799.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:40.167Z,1520558800.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:40.579Z,1520558800.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:40.975Z,1520558800.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:41.382Z,1520558801.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:41.778Z,1520558801.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:42.188Z,1520558802.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:42.584Z,1520558802.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:42.980Z,1520558802.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:43.389Z,1520558803.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:43.762Z,1520558803.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:44.168Z,1520558804.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:44.587Z,1520558804.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:44.962Z,1520558804.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:45.362Z,1520558805.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:45.766Z,1520558805.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:46.171Z,1520558806.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:46.577Z,1520558806.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:46.986Z,1520558806.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:47.386Z,1520558807.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:47.778Z,1520558807.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:48.165Z,1520558808.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:48.570Z,1520558808.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:48.970Z,1520558808.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:49.366Z,1520558809.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:49.766Z,1520558809.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:50.166Z,1520558810.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:50.566Z,1520558810.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:50.967Z,1520558810.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:51.362Z,1520558811.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:51.785Z,1520558811.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:54.986Z,1520558814.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:55.110Z,1520558815.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:55.473Z,1520558815.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:55.859Z,1520558815.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:56.264Z,1520558816.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:56.658Z,1520558816.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:56.676Z,1520558816.676 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T01:26:56.677Z,1520558816.677 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-03-09T01:26:56.677Z,1520558816.677 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T01:26:56.689Z,1520558816.689 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T01:26:57.060Z,1520558817.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:57.089Z,1520558817.089 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T01:26:57.089Z,1520558817.089 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-03-09T01:26:57.446Z,1520558817.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:57.475Z,1520558817.475 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T01:26:57.475Z,1520558817.475 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T01:26:57.475Z,1520558817.475 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T01:26:57.870Z,1520558817.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:58.250Z,1520558818.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:58.655Z,1520558818.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:59.060Z,1520558819.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:59.455Z,1520558819.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:26:59.869Z,1520558819.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:00.269Z,1520558820.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:00.669Z,1520558820.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:01.069Z,1520558821.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:01.455Z,1520558821.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:01.858Z,1520558821.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:02.259Z,1520558822.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:02.656Z,1520558822.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:03.063Z,1520558823.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:03.462Z,1520558823.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:03.859Z,1520558823.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:04.259Z,1520558824.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:04.659Z,1520558824.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:05.073Z,1520558825.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:05.466Z,1520558825.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:05.870Z,1520558825.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:06.276Z,1520558826.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:06.663Z,1520558826.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:07.050Z,1520558827.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:07.450Z,1520558827.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:07.846Z,1520558827.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:08.261Z,1520558828.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:08.650Z,1520558828.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:09.046Z,1520558829.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:09.463Z,1520558829.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:09.867Z,1520558829.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:10.274Z,1520558830.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:10.654Z,1520558830.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:11.050Z,1520558831.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:11.461Z,1520558831.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:11.861Z,1520558831.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:12.262Z,1520558832.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:12.651Z,1520558832.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:13.050Z,1520558833.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:13.458Z,1520558833.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:13.855Z,1520558833.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:14.254Z,1520558834.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:14.655Z,1520558834.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:15.058Z,1520558835.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:15.458Z,1520558835.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:15.856Z,1520558835.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:16.263Z,1520558836.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:16.658Z,1520558836.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:17.050Z,1520558837.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:17.450Z,1520558837.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:17.850Z,1520558837.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:18.250Z,1520558838.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:18.650Z,1520558838.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:19.055Z,1520558839.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:19.471Z,1520558839.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:19.870Z,1520558839.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:20.274Z,1520558840.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:20.650Z,1520558840.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:21.046Z,1520558841.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:21.450Z,1520558841.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:21.850Z,1520558841.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:22.251Z,1520558842.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:22.654Z,1520558842.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:23.050Z,1520558843.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:23.450Z,1520558843.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:23.854Z,1520558843.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:24.282Z,1520558844.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:24.657Z,1520558844.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:25.050Z,1520558845.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:25.450Z,1520558845.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:25.850Z,1520558845.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:26.254Z,1520558846.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:26.654Z,1520558846.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:27.056Z,1520558847.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:27.449Z,1520558847.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:27.851Z,1520558847.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:28.252Z,1520558848.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:28.662Z,1520558848.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:29.070Z,1520558849.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:29.473Z,1520558849.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:29.866Z,1520558849.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:30.263Z,1520558850.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:30.655Z,1520558850.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:31.057Z,1520558851.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:31.455Z,1520558851.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:31.858Z,1520558851.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:32.259Z,1520558852.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:32.656Z,1520558852.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:33.059Z,1520558853.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:33.468Z,1520558853.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:33.873Z,1520558853.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:34.274Z,1520558854.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:34.673Z,1520558854.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:35.050Z,1520558855.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:35.454Z,1520558855.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:35.848Z,1520558855.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:36.250Z,1520558856.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:36.654Z,1520558856.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:37.048Z,1520558857.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:37.450Z,1520558857.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:37.850Z,1520558857.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:38.254Z,1520558858.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:38.682Z,1520558858.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:39.061Z,1520558859.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:39.460Z,1520558859.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:39.869Z,1520558859.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:40.255Z,1520558860.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:40.652Z,1520558860.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:41.055Z,1520558861.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:41.455Z,1520558861.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:41.854Z,1520558861.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:42.260Z,1520558862.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:42.659Z,1520558862.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:43.059Z,1520558863.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:43.463Z,1520558863.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:43.887Z,1520558863.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:44.270Z,1520558864.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:44.669Z,1520558864.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:45.069Z,1520558865.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:45.465Z,1520558865.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:45.871Z,1520558865.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:46.251Z,1520558866.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:46.652Z,1520558866.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:47.058Z,1520558867.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:47.460Z,1520558867.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:47.852Z,1520558867.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:48.259Z,1520558868.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:48.658Z,1520558868.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:49.061Z,1520558869.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:49.468Z,1520558869.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:49.873Z,1520558869.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:50.273Z,1520558870.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:50.657Z,1520558870.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:51.060Z,1520558871.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:51.457Z,1520558871.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:51.481Z,1520558871.481 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-09T01:22:51.2Z
2018-03-09T01:27:51.481Z,1520558871.481 [Default:CheckIn:Read_GPS] Stopped
2018-03-09T01:27:51.481Z,1520558871.481 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-09T01:27:51.857Z,1520558871.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:55.283Z,1520558875.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:55.405Z,1520558875.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:55.753Z,1520558875.753 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0428.lzma
2018-03-09T01:27:55.797Z,1520558875.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:56.193Z,1520558876.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:56.553Z,1520558876.553 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0428.lzma.bak
2018-03-09T01:27:56.553Z,1520558876.553 [DataOverHttps](INFO): SBD MOMSN=7990935
2018-03-09T01:27:56.589Z,1520558876.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:57.323Z,1520558877.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:57.434Z,1520558877.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:27:57.797Z,1520558877.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:01.135Z,1520558881.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:01.257Z,1520558881.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:01.625Z,1520558881.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:02.010Z,1520558882.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:02.406Z,1520558882.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:02.809Z,1520558882.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:03.212Z,1520558883.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:06.462Z,1520558886.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:06.626Z,1520558886.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:06.945Z,1520558886.945 [DataOverHttps](INFO): Sending 234 bytes from file Logs/20180308T074127/Express0429.lzma
2018-03-09T01:28:06.993Z,1520558886.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:07.374Z,1520558887.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:07.752Z,1520558887.752 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0429.lzma.bak
2018-03-09T01:28:07.752Z,1520558887.752 [DataOverHttps](INFO): SBD MOMSN=7990937
2018-03-09T01:28:07.790Z,1520558887.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:08.371Z,1520558888.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:08.397Z,1520558888.397 [Default:CheckIn:Read_Iridium] Stopped
2018-03-09T01:28:08.397Z,1520558888.397 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-09T01:28:08.397Z,1520558888.397 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-09T01:28:08.570Z,1520558888.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:11.693Z,1520558891.693 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-09T01:28:11.721Z,1520558891.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:11.832Z,1520558891.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:12.232Z,1520558892.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:12.626Z,1520558892.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:13.029Z,1520558893.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:13.436Z,1520558893.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:13.829Z,1520558893.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:14.225Z,1520558894.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:14.638Z,1520558894.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:15.030Z,1520558895.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:15.423Z,1520558895.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:15.826Z,1520558895.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:16.230Z,1520558896.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:16.630Z,1520558896.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:17.030Z,1520558897.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:17.423Z,1520558897.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:17.821Z,1520558897.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:18.227Z,1520558898.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:18.620Z,1520558898.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:19.023Z,1520558899.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:19.425Z,1520558899.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:19.827Z,1520558899.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:20.227Z,1520558900.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:20.626Z,1520558900.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:21.026Z,1520558901.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:21.423Z,1520558901.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:21.822Z,1520558901.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:22.226Z,1520558902.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:22.629Z,1520558902.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:23.027Z,1520558903.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:23.429Z,1520558903.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:23.830Z,1520558903.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:24.230Z,1520558904.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:24.630Z,1520558904.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:25.019Z,1520558905.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:25.426Z,1520558905.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:25.826Z,1520558905.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:26.229Z,1520558906.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:26.635Z,1520558906.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:27.026Z,1520558907.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:27.423Z,1520558907.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:27.826Z,1520558907.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:28.226Z,1520558908.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:28.623Z,1520558908.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:29.035Z,1520558909.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:29.430Z,1520558909.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:29.827Z,1520558909.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:30.226Z,1520558910.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:30.630Z,1520558910.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:31.023Z,1520558911.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:31.425Z,1520558911.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:31.831Z,1520558911.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:32.226Z,1520558912.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:32.634Z,1520558912.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:33.030Z,1520558913.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:33.427Z,1520558913.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:33.835Z,1520558913.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:34.231Z,1520558914.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:34.631Z,1520558914.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:35.026Z,1520558915.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:35.430Z,1520558915.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:35.823Z,1520558915.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:36.227Z,1520558916.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:36.633Z,1520558916.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:37.026Z,1520558917.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:37.429Z,1520558917.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:37.830Z,1520558917.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:38.225Z,1520558918.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:38.627Z,1520558918.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:39.016Z,1520558919.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:39.419Z,1520558919.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:39.818Z,1520558919.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:40.219Z,1520558920.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:40.619Z,1520558920.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:41.040Z,1520558921.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:41.416Z,1520558921.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:41.817Z,1520558921.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:42.206Z,1520558922.206 [NAL9602](INFO): Powering down
2018-03-09T01:28:42.224Z,1520558922.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:42.618Z,1520558922.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:43.017Z,1520558923.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:43.418Z,1520558923.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:43.818Z,1520558923.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:44.226Z,1520558924.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:44.623Z,1520558924.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:45.022Z,1520558925.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:45.422Z,1520558925.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:45.825Z,1520558925.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:46.227Z,1520558926.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:46.622Z,1520558926.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:47.035Z,1520558927.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:47.421Z,1520558927.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:47.822Z,1520558927.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:48.227Z,1520558928.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:48.622Z,1520558928.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:49.022Z,1520558929.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:49.435Z,1520558929.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:49.822Z,1520558929.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:50.222Z,1520558930.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:50.626Z,1520558930.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:51.027Z,1520558931.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:51.430Z,1520558931.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:51.826Z,1520558931.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:52.226Z,1520558932.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:52.613Z,1520558932.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:53.030Z,1520558933.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:53.415Z,1520558933.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:53.818Z,1520558933.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:54.238Z,1520558934.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:54.614Z,1520558934.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:55.019Z,1520558935.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:55.438Z,1520558935.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:55.830Z,1520558935.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:56.219Z,1520558936.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:56.618Z,1520558936.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:57.015Z,1520558937.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:57.430Z,1520558937.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:57.818Z,1520558937.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:58.230Z,1520558938.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:58.630Z,1520558938.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:59.018Z,1520558939.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:59.411Z,1520558939.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:28:59.819Z,1520558939.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:00.230Z,1520558940.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:00.618Z,1520558940.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:01.018Z,1520558941.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:01.418Z,1520558941.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:01.814Z,1520558941.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:02.233Z,1520558942.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:02.618Z,1520558942.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:03.014Z,1520558943.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:03.419Z,1520558943.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:03.829Z,1520558943.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:04.230Z,1520558944.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:04.629Z,1520558944.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:05.018Z,1520558945.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:05.411Z,1520558945.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:05.829Z,1520558945.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:06.220Z,1520558946.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:06.619Z,1520558946.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:07.021Z,1520558947.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:07.423Z,1520558947.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:07.818Z,1520558947.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:08.224Z,1520558948.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:08.627Z,1520558948.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:09.025Z,1520558949.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:12.186Z,1520558952.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:12.301Z,1520558952.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:12.685Z,1520558952.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:13.083Z,1520558953.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:13.487Z,1520558953.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:13.886Z,1520558953.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:14.295Z,1520558954.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:14.683Z,1520558954.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:15.095Z,1520558955.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:15.491Z,1520558955.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:15.886Z,1520558955.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:16.287Z,1520558956.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:16.687Z,1520558956.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:17.082Z,1520558957.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:17.490Z,1520558957.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:17.891Z,1520558957.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:18.282Z,1520558958.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:18.694Z,1520558958.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:19.091Z,1520558959.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:19.488Z,1520558959.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:19.887Z,1520558959.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:20.297Z,1520558960.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:20.673Z,1520558960.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:21.099Z,1520558961.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:21.478Z,1520558961.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:21.878Z,1520558961.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:22.278Z,1520558962.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:22.678Z,1520558962.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:23.078Z,1520558963.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:23.479Z,1520558963.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:23.876Z,1520558963.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:24.283Z,1520558964.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:24.679Z,1520558964.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:25.075Z,1520558965.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:25.478Z,1520558965.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:25.882Z,1520558965.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:26.282Z,1520558966.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:26.682Z,1520558966.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:27.086Z,1520558967.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:27.483Z,1520558967.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:27.886Z,1520558967.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:28.295Z,1520558968.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:28.690Z,1520558968.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:29.090Z,1520558969.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:29.495Z,1520558969.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:29.871Z,1520558969.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:30.286Z,1520558970.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:30.686Z,1520558970.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:31.074Z,1520558971.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:31.482Z,1520558971.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:31.882Z,1520558971.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:32.279Z,1520558972.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:32.679Z,1520558972.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:33.078Z,1520558973.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:33.472Z,1520558973.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:33.878Z,1520558973.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:34.279Z,1520558974.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:34.679Z,1520558974.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:35.078Z,1520558975.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:35.479Z,1520558975.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:35.884Z,1520558975.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:36.274Z,1520558976.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:36.678Z,1520558976.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:37.087Z,1520558977.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:37.487Z,1520558977.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:37.886Z,1520558977.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:38.275Z,1520558978.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:38.690Z,1520558978.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:39.086Z,1520558979.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:39.471Z,1520558979.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:39.874Z,1520558979.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:40.296Z,1520558980.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:40.675Z,1520558980.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:41.078Z,1520558981.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:41.478Z,1520558981.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:41.878Z,1520558981.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:42.278Z,1520558982.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:42.688Z,1520558982.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:43.093Z,1520558983.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:43.499Z,1520558983.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:43.880Z,1520558983.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:44.280Z,1520558984.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:44.679Z,1520558984.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:45.103Z,1520558985.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:45.488Z,1520558985.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:45.887Z,1520558985.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:46.280Z,1520558986.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:46.685Z,1520558986.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:47.086Z,1520558987.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:47.485Z,1520558987.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:47.887Z,1520558987.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:48.281Z,1520558988.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:48.687Z,1520558988.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:49.087Z,1520558989.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:49.481Z,1520558989.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:49.878Z,1520558989.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:50.278Z,1520558990.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:50.678Z,1520558990.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:51.098Z,1520558991.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:51.478Z,1520558991.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:51.878Z,1520558991.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:52.279Z,1520558992.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:52.674Z,1520558992.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:53.081Z,1520558993.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:53.478Z,1520558993.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:53.874Z,1520558993.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:54.279Z,1520558994.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:54.678Z,1520558994.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:55.074Z,1520558995.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:55.498Z,1520558995.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:55.882Z,1520558995.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:56.278Z,1520558996.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:56.686Z,1520558996.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:57.079Z,1520558997.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:57.482Z,1520558997.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:57.519Z,1520558997.519 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T01:29:57.519Z,1520558997.519 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-03-09T01:29:57.519Z,1520558997.519 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T01:29:57.531Z,1520558997.531 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T01:29:57.879Z,1520558997.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:57.932Z,1520558997.932 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T01:29:57.937Z,1520558997.937 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-03-09T01:29:58.282Z,1520558998.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:58.318Z,1520558998.318 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T01:29:58.318Z,1520558998.318 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T01:29:58.318Z,1520558998.318 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T01:29:58.686Z,1520558998.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:59.089Z,1520558999.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:59.487Z,1520558999.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:29:59.889Z,1520558999.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:00.287Z,1520559000.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:00.687Z,1520559000.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:01.088Z,1520559001.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:01.487Z,1520559001.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:01.892Z,1520559001.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:02.286Z,1520559002.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:02.687Z,1520559002.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:03.086Z,1520559003.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:03.486Z,1520559003.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:03.886Z,1520559003.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:04.284Z,1520559004.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:04.682Z,1520559004.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:05.083Z,1520559005.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:05.481Z,1520559005.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:05.886Z,1520559005.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:06.286Z,1520559006.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:06.691Z,1520559006.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:07.086Z,1520559007.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:07.483Z,1520559007.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:07.887Z,1520559007.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:08.286Z,1520559008.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:08.691Z,1520559008.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:09.083Z,1520559009.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:12.421Z,1520559012.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:12.540Z,1520559012.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:12.904Z,1520559012.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:13.297Z,1520559013.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:13.694Z,1520559013.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:14.095Z,1520559014.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:14.497Z,1520559014.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:14.924Z,1520559014.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:15.294Z,1520559015.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:15.727Z,1520559015.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:16.102Z,1520559016.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:16.505Z,1520559016.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:16.911Z,1520559016.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:17.319Z,1520559017.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:17.724Z,1520559017.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:18.110Z,1520559018.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:18.514Z,1520559018.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:18.895Z,1520559018.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:19.296Z,1520559019.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:19.689Z,1520559019.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:20.095Z,1520559020.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:20.494Z,1520559020.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:20.884Z,1520559020.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:21.289Z,1520559021.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:21.688Z,1520559021.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:22.130Z,1520559022.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:22.493Z,1520559022.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:22.930Z,1520559022.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:23.305Z,1520559023.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:23.697Z,1520559023.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:24.103Z,1520559024.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:24.509Z,1520559024.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:24.907Z,1520559024.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:25.303Z,1520559025.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:25.708Z,1520559025.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:26.115Z,1520559026.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:26.504Z,1520559026.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:26.904Z,1520559026.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:27.297Z,1520559027.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:27.703Z,1520559027.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:28.101Z,1520559028.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:28.500Z,1520559028.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:28.898Z,1520559028.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:29.285Z,1520559029.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:29.722Z,1520559029.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:30.083Z,1520559030.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:30.515Z,1520559030.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:30.899Z,1520559030.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:31.302Z,1520559031.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:31.714Z,1520559031.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:32.126Z,1520559032.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:32.517Z,1520559032.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:32.888Z,1520559032.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:33.306Z,1520559033.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:33.718Z,1520559033.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:34.093Z,1520559034.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:34.502Z,1520559034.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:34.897Z,1520559034.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:35.295Z,1520559035.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:35.700Z,1520559035.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:36.097Z,1520559036.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:36.495Z,1520559036.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:36.897Z,1520559036.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:37.319Z,1520559037.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:37.687Z,1520559037.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:38.130Z,1520559038.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:38.520Z,1520559038.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:38.893Z,1520559038.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:39.314Z,1520559039.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:39.724Z,1520559039.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:40.116Z,1520559040.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:40.508Z,1520559040.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:40.913Z,1520559040.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:41.301Z,1520559041.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:41.701Z,1520559041.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:42.097Z,1520559042.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:42.499Z,1520559042.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:42.904Z,1520559042.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:43.300Z,1520559043.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:43.697Z,1520559043.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:44.096Z,1520559044.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:44.524Z,1520559044.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:44.893Z,1520559044.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:45.315Z,1520559045.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:45.711Z,1520559045.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:46.090Z,1520559046.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:46.508Z,1520559046.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:46.920Z,1520559046.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:47.318Z,1520559047.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:47.712Z,1520559047.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:48.119Z,1520559048.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:48.496Z,1520559048.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:48.902Z,1520559048.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:49.289Z,1520559049.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:49.694Z,1520559049.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:50.102Z,1520559050.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:50.490Z,1520559050.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:50.884Z,1520559050.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:51.294Z,1520559051.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:51.722Z,1520559051.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:52.095Z,1520559052.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:52.512Z,1520559052.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:52.923Z,1520559052.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:53.319Z,1520559053.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:53.699Z,1520559053.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:54.107Z,1520559054.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:54.518Z,1520559054.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:54.916Z,1520559054.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:55.288Z,1520559055.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:55.712Z,1520559055.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:56.117Z,1520559056.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:56.492Z,1520559056.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:56.892Z,1520559056.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:57.290Z,1520559057.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:57.695Z,1520559057.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:58.092Z,1520559058.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:58.499Z,1520559058.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:58.896Z,1520559058.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:59.289Z,1520559059.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:30:59.731Z,1520559059.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:00.090Z,1520559060.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:00.534Z,1520559060.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:00.909Z,1520559060.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:01.306Z,1520559061.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:01.710Z,1520559061.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:02.130Z,1520559062.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:02.530Z,1520559062.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:02.900Z,1520559062.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:03.313Z,1520559063.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:03.701Z,1520559063.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:04.100Z,1520559064.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:04.496Z,1520559064.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:04.900Z,1520559064.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:05.299Z,1520559065.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:05.698Z,1520559065.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:06.099Z,1520559066.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:06.494Z,1520559066.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:06.917Z,1520559066.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:07.287Z,1520559067.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:07.728Z,1520559067.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:08.112Z,1520559068.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:08.506Z,1520559068.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:08.896Z,1520559068.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:09.320Z,1520559069.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:12.482Z,1520559072.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:12.594Z,1520559072.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:12.986Z,1520559072.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:13.382Z,1520559073.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:13.782Z,1520559073.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:14.185Z,1520559074.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:14.586Z,1520559074.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:14.978Z,1520559074.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:15.390Z,1520559075.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:15.779Z,1520559075.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:16.180Z,1520559076.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:16.587Z,1520559076.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:16.986Z,1520559076.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:17.383Z,1520559077.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:17.786Z,1520559077.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:18.183Z,1520559078.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:18.585Z,1520559078.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:18.987Z,1520559078.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:19.387Z,1520559079.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:19.787Z,1520559079.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:20.186Z,1520559080.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:20.583Z,1520559080.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:20.987Z,1520559080.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:21.386Z,1520559081.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:21.789Z,1520559081.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:22.187Z,1520559082.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:22.586Z,1520559082.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:22.990Z,1520559082.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:23.383Z,1520559083.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:23.795Z,1520559083.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:24.191Z,1520559084.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:24.586Z,1520559084.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:24.986Z,1520559084.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:25.386Z,1520559085.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:25.791Z,1520559085.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:26.185Z,1520559086.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:26.586Z,1520559086.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:26.983Z,1520559086.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:27.386Z,1520559087.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:27.791Z,1520559087.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:28.187Z,1520559088.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:28.584Z,1520559088.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:28.987Z,1520559088.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:29.386Z,1520559089.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:29.786Z,1520559089.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:30.186Z,1520559090.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:30.585Z,1520559090.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:30.986Z,1520559090.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:31.386Z,1520559091.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:31.777Z,1520559091.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:32.186Z,1520559092.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:32.591Z,1520559092.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:32.983Z,1520559092.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:33.386Z,1520559093.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:33.786Z,1520559093.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:34.190Z,1520559094.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:34.587Z,1520559094.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:34.987Z,1520559094.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:35.387Z,1520559095.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:35.787Z,1520559095.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:36.186Z,1520559096.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:36.591Z,1520559096.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:36.987Z,1520559096.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:37.395Z,1520559097.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:37.785Z,1520559097.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:38.188Z,1520559098.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:38.591Z,1520559098.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:38.991Z,1520559098.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:39.387Z,1520559099.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:39.791Z,1520559099.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:40.181Z,1520559100.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:40.594Z,1520559100.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:40.979Z,1520559100.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:41.379Z,1520559101.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:41.779Z,1520559101.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:42.172Z,1520559102.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:42.578Z,1520559102.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:42.978Z,1520559102.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:43.373Z,1520559103.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:43.784Z,1520559103.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:44.198Z,1520559104.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:44.580Z,1520559104.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:44.978Z,1520559104.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:45.378Z,1520559105.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:45.826Z,1520559105.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:46.197Z,1520559106.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:46.583Z,1520559106.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:46.984Z,1520559106.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:47.398Z,1520559107.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:47.783Z,1520559107.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:48.184Z,1520559108.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:48.587Z,1520559108.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:48.986Z,1520559108.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:49.387Z,1520559109.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:49.786Z,1520559109.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:50.187Z,1520559110.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:50.586Z,1520559110.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:50.981Z,1520559110.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:51.389Z,1520559111.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:51.790Z,1520559111.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:52.190Z,1520559112.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:52.589Z,1520559112.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:52.978Z,1520559112.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:53.382Z,1520559113.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:53.790Z,1520559113.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:54.191Z,1520559114.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:54.589Z,1520559114.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:54.986Z,1520559114.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:55.386Z,1520559115.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:55.790Z,1520559115.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:56.191Z,1520559116.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:56.586Z,1520559116.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:56.986Z,1520559116.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:57.386Z,1520559117.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:57.783Z,1520559117.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:58.190Z,1520559118.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:58.587Z,1520559118.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:58.983Z,1520559118.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:59.384Z,1520559119.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:31:59.790Z,1520559119.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:00.180Z,1520559120.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:00.587Z,1520559120.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:00.985Z,1520559120.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:01.378Z,1520559121.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:01.782Z,1520559121.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:02.190Z,1520559122.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:02.582Z,1520559122.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:02.990Z,1520559122.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:03.378Z,1520559123.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:03.782Z,1520559123.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:04.179Z,1520559124.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:04.578Z,1520559124.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:04.975Z,1520559124.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:05.382Z,1520559125.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:05.780Z,1520559125.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:06.171Z,1520559126.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:06.580Z,1520559126.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:06.978Z,1520559126.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:07.375Z,1520559127.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:07.795Z,1520559127.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:07.846Z,1520559127.846 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-09T01:32:08.185Z,1520559128.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:08.590Z,1520559128.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:08.995Z,1520559128.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:09.385Z,1520559129.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:12.689Z,1520559132.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:12.805Z,1520559132.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:13.167Z,1520559133.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:13.560Z,1520559133.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:13.967Z,1520559133.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:14.366Z,1520559134.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:14.761Z,1520559134.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:15.165Z,1520559135.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:15.565Z,1520559135.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:15.966Z,1520559135.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:16.369Z,1520559136.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:16.775Z,1520559136.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:17.162Z,1520559137.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:17.566Z,1520559137.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:17.966Z,1520559137.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:18.366Z,1520559138.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:18.766Z,1520559138.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:19.175Z,1520559139.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:19.555Z,1520559139.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:19.970Z,1520559139.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:20.366Z,1520559140.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:20.755Z,1520559140.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:21.169Z,1520559141.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:21.570Z,1520559141.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:21.951Z,1520559141.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:22.369Z,1520559142.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:22.780Z,1520559142.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:23.152Z,1520559143.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:23.557Z,1520559143.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:23.978Z,1520559143.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:24.354Z,1520559144.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:24.769Z,1520559144.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:25.178Z,1520559145.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:25.558Z,1520559145.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:25.970Z,1520559145.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:26.369Z,1520559146.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:26.754Z,1520559146.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:27.158Z,1520559147.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:27.559Z,1520559147.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:27.955Z,1520559147.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:28.358Z,1520559148.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:28.769Z,1520559148.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:29.154Z,1520559149.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:29.580Z,1520559149.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:29.958Z,1520559149.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:30.358Z,1520559150.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:30.758Z,1520559150.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:31.158Z,1520559151.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:31.558Z,1520559151.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:31.958Z,1520559151.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:32.362Z,1520559152.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:32.765Z,1520559152.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:33.169Z,1520559153.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:33.568Z,1520559153.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:33.962Z,1520559153.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:34.372Z,1520559154.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:34.767Z,1520559154.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:35.165Z,1520559155.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:35.563Z,1520559155.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:35.971Z,1520559155.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:36.358Z,1520559156.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:36.771Z,1520559156.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:37.159Z,1520559157.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:37.559Z,1520559157.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:37.953Z,1520559157.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:38.358Z,1520559158.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:38.758Z,1520559158.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:39.156Z,1520559159.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:39.558Z,1520559159.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:39.962Z,1520559159.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:40.366Z,1520559160.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:40.765Z,1520559160.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:41.162Z,1520559161.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:41.563Z,1520559161.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:41.962Z,1520559161.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:42.362Z,1520559162.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:42.754Z,1520559162.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:43.178Z,1520559163.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:43.557Z,1520559163.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:43.958Z,1520559163.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:44.378Z,1520559164.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:44.757Z,1520559164.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:45.155Z,1520559165.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:45.558Z,1520559165.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:45.955Z,1520559165.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:46.354Z,1520559166.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:46.758Z,1520559166.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:47.162Z,1520559167.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:47.555Z,1520559167.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:47.966Z,1520559167.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:48.358Z,1520559168.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:48.766Z,1520559168.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:49.167Z,1520559169.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:49.567Z,1520559169.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:49.966Z,1520559169.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:50.364Z,1520559170.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:50.770Z,1520559170.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:51.154Z,1520559171.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:51.558Z,1520559171.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:51.954Z,1520559171.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:52.366Z,1520559172.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:52.766Z,1520559172.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:53.161Z,1520559173.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:53.552Z,1520559173.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:53.960Z,1520559173.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:54.370Z,1520559174.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:54.767Z,1520559174.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:55.170Z,1520559175.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:55.568Z,1520559175.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:55.965Z,1520559175.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:56.365Z,1520559176.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:56.766Z,1520559176.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:57.163Z,1520559177.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:57.573Z,1520559177.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:57.954Z,1520559177.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:58.370Z,1520559178.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:58.389Z,1520559178.389 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T01:32:58.389Z,1520559178.389 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-03-09T01:32:58.389Z,1520559178.389 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T01:32:58.402Z,1520559178.402 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T01:32:58.778Z,1520559178.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:58.808Z,1520559178.808 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T01:32:58.808Z,1520559178.808 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-03-09T01:32:59.158Z,1520559179.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:59.194Z,1520559179.194 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T01:32:59.195Z,1520559179.195 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T01:32:59.195Z,1520559179.195 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T01:32:59.555Z,1520559179.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:32:59.958Z,1520559179.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:00.358Z,1520559180.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:00.762Z,1520559180.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:01.158Z,1520559181.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:01.562Z,1520559181.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:01.955Z,1520559181.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:02.359Z,1520559182.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:02.758Z,1520559182.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:03.159Z,1520559183.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:03.567Z,1520559183.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:03.965Z,1520559183.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:04.368Z,1520559184.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:04.764Z,1520559184.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:05.162Z,1520559185.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:05.562Z,1520559185.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:05.976Z,1520559185.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:06.370Z,1520559186.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:06.754Z,1520559186.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:07.170Z,1520559187.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:07.570Z,1520559187.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:07.955Z,1520559187.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:08.361Z,1520559188.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:08.762Z,1520559188.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:08.793Z,1520559188.793 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-09T01:33:08.793Z,1520559188.793 [Default:CheckIn:C.Wait] Stopped
2018-03-09T01:33:08.793Z,1520559188.793 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-09T01:33:08.793Z,1520559188.793 [Default:CheckIn:D] Running Loop=1
2018-03-09T01:33:09.157Z,1520559189.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:09.210Z,1520559189.210 [Default:CheckIn:D] Stopped
2018-03-09T01:33:09.210Z,1520559189.210 [Default:CheckIn:E] Running Loop=1
2018-03-09T01:33:09.562Z,1520559189.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:09.594Z,1520559189.594 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1067.406771 min 
2018-03-09T01:33:09.594Z,1520559189.594 [Default:CheckIn:E] Stopped
2018-03-09T01:33:09.594Z,1520559189.594 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-09T01:33:09.594Z,1520559189.594 [Default:CheckIn] Stopped
2018-03-09T01:33:09.594Z,1520559189.594 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-09T01:33:09.595Z,1520559189.595 [Default:CheckIn](INFO): Running loop #108
2018-03-09T01:33:09.595Z,1520559189.595 [Default:CheckIn] Running Loop=108
2018-03-09T01:33:09.595Z,1520559189.595 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-09T01:33:09.595Z,1520559189.595 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-09T01:33:12.900Z,1520559192.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:12.988Z,1520559192.988 [NAL9602](INFO): Powering up
2018-03-09T01:33:13.004Z,1520559193.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:13.414Z,1520559193.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:13.803Z,1520559193.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:14.200Z,1520559194.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:14.603Z,1520559194.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:15.001Z,1520559195.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:15.402Z,1520559195.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:15.803Z,1520559195.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:16.205Z,1520559196.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:16.605Z,1520559196.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:17.014Z,1520559197.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:17.409Z,1520559197.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:17.806Z,1520559197.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:18.215Z,1520559198.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:18.606Z,1520559198.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:19.004Z,1520559199.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:19.415Z,1520559199.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:19.806Z,1520559199.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:20.202Z,1520559200.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:20.600Z,1520559200.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:21.007Z,1520559201.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:21.394Z,1520559201.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:21.801Z,1520559201.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:22.210Z,1520559202.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:22.611Z,1520559202.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:22.998Z,1520559202.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:23.394Z,1520559203.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:23.819Z,1520559203.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:24.182Z,1520559204.182 [NAL9602](INFO): NAL9602 initialized
2018-03-09T01:33:24.198Z,1520559204.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:24.598Z,1520559204.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:24.979Z,1520559204.979 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-09T01:33:24.980Z,1520559204.980 [NAL9602] Data Fault, FailCount= 5
2018-03-09T01:33:24.980Z,1520559204.980 [NAL9602](ERROR): Data Fault
2018-03-09T01:33:24.997Z,1520559204.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:25.040Z,1520559205.040 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-09T01:33:25.040Z,1520559205.040 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-09T01:33:25.382Z,1520559205.382 [NAL9602](INFO): Powering down
2018-03-09T01:33:25.399Z,1520559205.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:25.461Z,1520559205.461 [CBIT](INFO): Critical error at 20180309T013325
2018-03-09T01:33:25.804Z,1520559205.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:26.198Z,1520559206.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:26.610Z,1520559206.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:27.001Z,1520559207.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:27.402Z,1520559207.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:27.804Z,1520559207.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:28.200Z,1520559208.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:28.607Z,1520559208.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:29.004Z,1520559209.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:29.401Z,1520559209.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:29.805Z,1520559209.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:30.209Z,1520559210.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:30.610Z,1520559210.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:31.003Z,1520559211.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:31.414Z,1520559211.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:31.806Z,1520559211.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:32.190Z,1520559212.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:32.616Z,1520559212.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:32.998Z,1520559212.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:33.394Z,1520559213.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:33.798Z,1520559213.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:34.194Z,1520559214.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:34.602Z,1520559214.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:34.998Z,1520559214.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:35.394Z,1520559215.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:35.802Z,1520559215.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:36.198Z,1520559216.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:36.593Z,1520559216.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:36.995Z,1520559216.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:37.398Z,1520559217.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:37.798Z,1520559217.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:38.204Z,1520559218.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:38.618Z,1520559218.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:38.994Z,1520559218.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:39.394Z,1520559219.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:39.797Z,1520559219.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:40.203Z,1520559220.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:40.605Z,1520559220.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:41.009Z,1520559221.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:41.404Z,1520559221.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:41.806Z,1520559221.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:42.215Z,1520559222.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:42.607Z,1520559222.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:42.999Z,1520559222.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:43.399Z,1520559223.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:43.802Z,1520559223.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:44.200Z,1520559224.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:44.641Z,1520559224.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:45.004Z,1520559225.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:45.407Z,1520559225.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:45.798Z,1520559225.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:46.194Z,1520559226.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:46.598Z,1520559226.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:47.022Z,1520559227.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:47.401Z,1520559227.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:47.801Z,1520559227.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:48.198Z,1520559228.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:48.601Z,1520559228.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:48.995Z,1520559228.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:49.402Z,1520559229.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:49.802Z,1520559229.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:50.206Z,1520559230.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:50.598Z,1520559230.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:50.997Z,1520559230.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:51.391Z,1520559231.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:51.803Z,1520559231.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:52.204Z,1520559232.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:52.607Z,1520559232.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:53.005Z,1520559233.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:53.404Z,1520559233.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:53.805Z,1520559233.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:54.204Z,1520559234.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:54.606Z,1520559234.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:55.003Z,1520559235.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:55.405Z,1520559235.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:55.808Z,1520559235.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:56.203Z,1520559236.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:56.609Z,1520559236.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:57.008Z,1520559237.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:57.403Z,1520559237.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:57.805Z,1520559237.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:58.205Z,1520559238.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:58.603Z,1520559238.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:59.014Z,1520559239.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:59.406Z,1520559239.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:33:59.805Z,1520559239.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:00.214Z,1520559240.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:00.605Z,1520559240.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:01.023Z,1520559241.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:01.416Z,1520559241.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:01.810Z,1520559241.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:02.197Z,1520559242.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:02.601Z,1520559242.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:02.994Z,1520559242.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:03.395Z,1520559243.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:03.797Z,1520559243.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:04.200Z,1520559244.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:04.602Z,1520559244.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:05.010Z,1520559245.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:05.399Z,1520559245.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:05.855Z,1520559245.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:06.219Z,1520559246.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:06.600Z,1520559246.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:06.998Z,1520559246.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:07.402Z,1520559247.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:07.799Z,1520559247.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:08.194Z,1520559248.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:08.597Z,1520559248.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:09.002Z,1520559249.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:09.398Z,1520559249.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:09.798Z,1520559249.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:13.063Z,1520559253.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:13.191Z,1520559253.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:13.554Z,1520559253.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:13.946Z,1520559253.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:14.334Z,1520559254.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:14.733Z,1520559254.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:15.134Z,1520559255.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:15.532Z,1520559255.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:15.933Z,1520559255.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:16.338Z,1520559256.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:16.730Z,1520559256.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:17.138Z,1520559257.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:17.539Z,1520559257.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:17.931Z,1520559257.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:18.329Z,1520559258.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:18.746Z,1520559258.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:19.130Z,1520559259.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:19.533Z,1520559259.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:19.938Z,1520559259.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:20.334Z,1520559260.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:20.739Z,1520559260.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:21.139Z,1520559261.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:21.539Z,1520559261.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:21.941Z,1520559261.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:22.341Z,1520559262.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:22.738Z,1520559262.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:23.141Z,1520559263.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:23.541Z,1520559263.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:23.937Z,1520559263.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:24.339Z,1520559264.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:24.745Z,1520559264.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:25.138Z,1520559265.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:25.541Z,1520559265.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:25.946Z,1520559265.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:26.342Z,1520559266.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:26.754Z,1520559266.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:27.146Z,1520559267.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:27.533Z,1520559267.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:27.934Z,1520559267.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:28.334Z,1520559268.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:28.734Z,1520559268.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:29.135Z,1520559269.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:29.530Z,1520559269.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:29.930Z,1520559269.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:30.333Z,1520559270.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:30.733Z,1520559270.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:31.138Z,1520559271.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:31.534Z,1520559271.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:31.932Z,1520559271.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:32.334Z,1520559272.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:32.733Z,1520559272.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:33.138Z,1520559273.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:33.542Z,1520559273.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:33.940Z,1520559273.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:34.341Z,1520559274.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:34.741Z,1520559274.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:35.141Z,1520559275.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:35.527Z,1520559275.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:35.930Z,1520559275.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:36.341Z,1520559276.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:36.745Z,1520559276.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:37.130Z,1520559277.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:37.533Z,1520559277.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:37.931Z,1520559277.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:38.334Z,1520559278.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:38.739Z,1520559278.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:39.140Z,1520559279.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:39.543Z,1520559279.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:39.943Z,1520559279.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:40.338Z,1520559280.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:40.738Z,1520559280.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:41.140Z,1520559281.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:41.538Z,1520559281.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:41.948Z,1520559281.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:42.341Z,1520559282.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:42.741Z,1520559282.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:43.141Z,1520559283.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:43.542Z,1520559283.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:43.941Z,1520559283.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:44.341Z,1520559284.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:44.770Z,1520559284.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:45.127Z,1520559285.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:45.536Z,1520559285.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:45.934Z,1520559285.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:46.341Z,1520559286.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:46.741Z,1520559286.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:47.141Z,1520559287.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:47.538Z,1520559287.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:47.942Z,1520559287.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:48.342Z,1520559288.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:48.738Z,1520559288.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:49.141Z,1520559289.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:49.540Z,1520559289.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:49.938Z,1520559289.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:50.354Z,1520559290.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:50.734Z,1520559290.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:51.129Z,1520559291.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:51.534Z,1520559291.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:51.938Z,1520559291.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:52.338Z,1520559292.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:52.734Z,1520559292.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:53.134Z,1520559293.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:53.540Z,1520559293.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:53.942Z,1520559293.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:54.339Z,1520559294.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:54.738Z,1520559294.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:55.139Z,1520559295.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:55.540Z,1520559295.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:55.941Z,1520559295.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:56.337Z,1520559296.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:56.746Z,1520559296.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:57.138Z,1520559297.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:57.540Z,1520559297.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:57.937Z,1520559297.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:58.345Z,1520559298.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:58.738Z,1520559298.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:59.155Z,1520559299.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:59.534Z,1520559299.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:34:59.938Z,1520559299.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:00.354Z,1520559300.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:00.734Z,1520559300.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:01.138Z,1520559301.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:01.534Z,1520559301.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:01.934Z,1520559301.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:02.330Z,1520559302.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:02.742Z,1520559302.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:03.130Z,1520559303.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:03.531Z,1520559303.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:03.934Z,1520559303.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:04.333Z,1520559304.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:04.737Z,1520559304.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:05.139Z,1520559305.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:05.541Z,1520559305.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:05.938Z,1520559305.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:06.341Z,1520559306.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:06.741Z,1520559306.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:07.141Z,1520559307.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:07.541Z,1520559307.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:07.942Z,1520559307.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:08.341Z,1520559308.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:08.743Z,1520559308.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:09.142Z,1520559309.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:09.532Z,1520559309.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:09.937Z,1520559309.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:13.120Z,1520559313.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:13.243Z,1520559313.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:13.612Z,1520559313.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:14.004Z,1520559314.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:14.402Z,1520559314.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:14.806Z,1520559314.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:15.204Z,1520559315.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:15.604Z,1520559315.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:16.006Z,1520559316.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:16.406Z,1520559316.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:16.808Z,1520559316.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:17.209Z,1520559317.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:17.610Z,1520559317.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:18.003Z,1520559318.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:18.407Z,1520559318.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:18.816Z,1520559318.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:19.198Z,1520559319.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:19.618Z,1520559319.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:20.004Z,1520559320.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:20.417Z,1520559320.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:20.824Z,1520559320.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:21.212Z,1520559321.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:21.609Z,1520559321.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:22.014Z,1520559322.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:22.406Z,1520559322.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:22.817Z,1520559322.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:23.205Z,1520559323.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:23.617Z,1520559323.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:23.999Z,1520559323.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:24.402Z,1520559324.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:24.808Z,1520559324.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:25.202Z,1520559325.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:25.261Z,1520559325.261 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-09T01:35:25.261Z,1520559325.261 [NAL9602] No Fault, FailCount= 5
2018-03-09T01:35:25.586Z,1520559325.586 [NAL9602](INFO): Powering up NAL9602
2018-03-09T01:35:25.603Z,1520559325.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:26.003Z,1520559326.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:26.401Z,1520559326.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:26.822Z,1520559326.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:27.205Z,1520559327.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:27.612Z,1520559327.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:28.012Z,1520559328.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:28.409Z,1520559328.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:28.798Z,1520559328.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:29.202Z,1520559329.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:29.609Z,1520559329.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:30.002Z,1520559330.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:30.401Z,1520559330.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:30.798Z,1520559330.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:31.202Z,1520559331.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:31.603Z,1520559331.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:32.007Z,1520559332.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:32.412Z,1520559332.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:32.814Z,1520559332.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:33.220Z,1520559333.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:33.598Z,1520559333.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:34.006Z,1520559334.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:34.404Z,1520559334.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:34.810Z,1520559334.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:35.206Z,1520559335.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:35.606Z,1520559335.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:36.015Z,1520559336.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:36.418Z,1520559336.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:36.786Z,1520559336.786 [NAL9602](INFO): NAL9602 initialized
2018-03-09T01:35:36.802Z,1520559336.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:37.196Z,1520559337.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:37.630Z,1520559337.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:38.029Z,1520559338.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:38.429Z,1520559338.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:38.803Z,1520559338.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:39.215Z,1520559339.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:39.606Z,1520559339.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:40.014Z,1520559340.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:40.415Z,1520559340.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:40.819Z,1520559340.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:41.222Z,1520559341.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:41.619Z,1520559341.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:42.005Z,1520559342.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:42.418Z,1520559342.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:42.836Z,1520559342.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:43.209Z,1520559343.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:43.610Z,1520559343.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:44.017Z,1520559344.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:44.416Z,1520559344.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:44.836Z,1520559344.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:45.225Z,1520559345.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:45.620Z,1520559345.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:46.020Z,1520559346.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:46.413Z,1520559346.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:46.820Z,1520559346.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:47.220Z,1520559347.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:47.615Z,1520559347.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:47.000Z,1520559348.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:48.410Z,1520559348.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:48.814Z,1520559348.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:49.206Z,1520559349.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:49.622Z,1520559349.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:49.998Z,1520559349.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:50.409Z,1520559350.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:50.817Z,1520559350.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:51.211Z,1520559351.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:51.613Z,1520559351.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:52.010Z,1520559352.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:52.417Z,1520559352.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:52.798Z,1520559352.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:53.218Z,1520559353.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:53.603Z,1520559353.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:53.998Z,1520559353.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:54.399Z,1520559354.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:54.798Z,1520559354.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:55.199Z,1520559355.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:55.604Z,1520559355.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:56.111Z,1520559356.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:56.400Z,1520559356.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:56.804Z,1520559356.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:57.214Z,1520559357.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:57.615Z,1520559357.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:58.003Z,1520559358.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:58.403Z,1520559358.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:58.810Z,1520559358.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:59.207Z,1520559359.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:59.242Z,1520559359.242 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T01:35:59.242Z,1520559359.242 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-03-09T01:35:59.242Z,1520559359.242 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T01:35:59.255Z,1520559359.255 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T01:35:59.602Z,1520559359.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:35:59.641Z,1520559359.641 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T01:35:59.641Z,1520559359.641 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-03-09T01:36:00.004Z,1520559360.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:00.042Z,1520559360.042 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T01:36:00.042Z,1520559360.042 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T01:36:00.042Z,1520559360.042 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T01:36:00.406Z,1520559360.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:00.803Z,1520559360.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:01.202Z,1520559361.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:01.583Z,1520559361.583 [NAL9602](INFO): SBD MO Status=2, MOMSN=4911, MT Status=2, MTMSN=0
2018-03-09T01:36:01.583Z,1520559361.583 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-09T01:36:01.602Z,1520559361.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:02.028Z,1520559362.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:02.402Z,1520559362.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:02.802Z,1520559362.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:03.221Z,1520559363.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:03.616Z,1520559363.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:04.011Z,1520559364.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:04.412Z,1520559364.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:04.812Z,1520559364.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:05.220Z,1520559365.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:05.614Z,1520559365.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:06.024Z,1520559366.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:06.423Z,1520559366.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:06.813Z,1520559366.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:07.199Z,1520559367.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:07.623Z,1520559367.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:08.004Z,1520559368.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:08.401Z,1520559368.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:08.803Z,1520559368.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:09.206Z,1520559369.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:09.602Z,1520559369.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:10.005Z,1520559370.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:13.288Z,1520559373.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:13.413Z,1520559373.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:13.790Z,1520559373.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:14.191Z,1520559374.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:14.590Z,1520559374.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:14.994Z,1520559374.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:15.391Z,1520559375.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:15.794Z,1520559375.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:16.190Z,1520559376.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:16.591Z,1520559376.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:16.991Z,1520559376.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:17.400Z,1520559377.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:17.792Z,1520559377.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:18.188Z,1520559378.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:18.582Z,1520559378.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:18.982Z,1520559378.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:19.379Z,1520559379.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:19.782Z,1520559379.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:20.196Z,1520559380.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:20.580Z,1520559380.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:20.983Z,1520559380.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:21.382Z,1520559381.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:21.778Z,1520559381.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:22.205Z,1520559382.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:22.605Z,1520559382.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:22.982Z,1520559382.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:23.382Z,1520559383.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:23.782Z,1520559383.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:24.190Z,1520559384.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:24.601Z,1520559384.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:24.983Z,1520559384.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:25.382Z,1520559385.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:25.786Z,1520559385.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:26.182Z,1520559386.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:26.580Z,1520559386.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:26.986Z,1520559386.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:27.382Z,1520559387.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:27.790Z,1520559387.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:28.191Z,1520559388.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:28.590Z,1520559388.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:28.980Z,1520559388.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:29.387Z,1520559389.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:29.794Z,1520559389.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:30.187Z,1520559390.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:30.591Z,1520559390.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:30.997Z,1520559390.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:31.387Z,1520559391.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:31.791Z,1520559391.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:32.200Z,1520559392.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:32.589Z,1520559392.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:32.000Z,1520559393.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:33.401Z,1520559393.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:33.794Z,1520559393.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:34.185Z,1520559394.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:34.596Z,1520559394.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:34.978Z,1520559394.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:35.382Z,1520559395.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:35.783Z,1520559395.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:36.179Z,1520559396.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:36.602Z,1520559396.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:36.982Z,1520559396.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:37.402Z,1520559397.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:37.803Z,1520559397.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:38.183Z,1520559398.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:38.583Z,1520559398.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:38.982Z,1520559398.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:39.390Z,1520559399.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:39.784Z,1520559399.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:40.188Z,1520559400.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:40.589Z,1520559400.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:40.992Z,1520559400.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:41.391Z,1520559401.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:41.797Z,1520559401.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:42.195Z,1520559402.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:42.591Z,1520559402.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:42.991Z,1520559402.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:43.391Z,1520559403.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:43.801Z,1520559403.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:44.202Z,1520559404.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:44.589Z,1520559404.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:44.989Z,1520559404.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:45.392Z,1520559405.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:45.799Z,1520559405.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:46.205Z,1520559406.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:46.578Z,1520559406.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:46.978Z,1520559406.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:47.386Z,1520559407.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:47.782Z,1520559407.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:48.187Z,1520559408.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:48.582Z,1520559408.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:48.986Z,1520559408.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:49.386Z,1520559409.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:49.783Z,1520559409.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:50.197Z,1520559410.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:50.597Z,1520559410.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:50.982Z,1520559410.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:51.382Z,1520559411.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:51.785Z,1520559411.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:52.185Z,1520559412.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:52.590Z,1520559412.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:52.990Z,1520559412.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:53.387Z,1520559413.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:53.790Z,1520559413.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:54.186Z,1520559414.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:54.601Z,1520559414.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:55.001Z,1520559415.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:55.390Z,1520559415.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:55.787Z,1520559415.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:56.187Z,1520559416.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:56.591Z,1520559416.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:56.992Z,1520559416.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:57.395Z,1520559417.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:57.791Z,1520559417.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:58.209Z,1520559418.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:58.591Z,1520559418.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:58.991Z,1520559418.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:59.390Z,1520559419.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:36:59.791Z,1520559419.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:00.200Z,1520559420.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:00.582Z,1520559420.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:01.010Z,1520559421.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:01.385Z,1520559421.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:01.784Z,1520559421.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:02.208Z,1520559422.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:02.593Z,1520559422.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:02.991Z,1520559422.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:03.397Z,1520559423.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:03.801Z,1520559423.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:04.197Z,1520559424.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:04.582Z,1520559424.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:04.982Z,1520559424.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:05.400Z,1520559425.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:05.803Z,1520559425.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:06.183Z,1520559426.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:06.586Z,1520559426.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:06.982Z,1520559426.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:07.386Z,1520559427.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:07.782Z,1520559427.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:08.187Z,1520559428.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:08.587Z,1520559428.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:08.982Z,1520559428.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:09.378Z,1520559429.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:09.797Z,1520559429.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:10.197Z,1520559430.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:13.470Z,1520559433.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:13.584Z,1520559433.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:13.995Z,1520559433.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:14.381Z,1520559434.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:14.779Z,1520559434.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:15.180Z,1520559435.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:15.572Z,1520559435.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:15.979Z,1520559435.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:16.385Z,1520559436.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:16.781Z,1520559436.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:17.173Z,1520559437.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:17.586Z,1520559437.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:17.962Z,1520559437.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:18.367Z,1520559438.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:18.786Z,1520559438.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:19.167Z,1520559439.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:19.567Z,1520559439.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:19.966Z,1520559439.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:20.370Z,1520559440.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:20.770Z,1520559440.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:21.179Z,1520559441.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:21.575Z,1520559441.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:21.977Z,1520559441.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:22.374Z,1520559442.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:22.771Z,1520559442.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:23.173Z,1520559443.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:23.578Z,1520559443.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:23.967Z,1520559443.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:24.386Z,1520559444.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:24.786Z,1520559444.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:25.183Z,1520559445.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:25.577Z,1520559445.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:25.984Z,1520559445.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:26.371Z,1520559446.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:26.772Z,1520559446.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:27.178Z,1520559447.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:27.576Z,1520559447.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:27.978Z,1520559447.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:28.369Z,1520559448.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:28.779Z,1520559448.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:29.189Z,1520559449.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:29.589Z,1520559449.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:29.970Z,1520559449.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:30.370Z,1520559450.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:30.767Z,1520559450.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:31.166Z,1520559451.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:31.574Z,1520559451.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:31.982Z,1520559451.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:32.376Z,1520559452.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:32.776Z,1520559452.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:33.182Z,1520559453.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:33.582Z,1520559453.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:33.985Z,1520559453.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:34.369Z,1520559454.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:34.780Z,1520559454.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:35.178Z,1520559455.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:35.567Z,1520559455.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:35.970Z,1520559455.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:36.365Z,1520559456.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:36.771Z,1520559456.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:37.168Z,1520559457.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:37.565Z,1520559457.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:37.975Z,1520559457.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:38.375Z,1520559458.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:38.771Z,1520559458.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:39.184Z,1520559459.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:39.576Z,1520559459.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:39.974Z,1520559459.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:40.385Z,1520559460.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:40.775Z,1520559460.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:41.177Z,1520559461.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:41.566Z,1520559461.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:41.993Z,1520559461.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:42.367Z,1520559462.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:42.768Z,1520559462.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:43.177Z,1520559463.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:43.572Z,1520559463.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:43.978Z,1520559463.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:44.375Z,1520559464.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:44.776Z,1520559464.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:45.193Z,1520559465.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:45.573Z,1520559465.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:45.975Z,1520559465.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:46.386Z,1520559466.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:46.766Z,1520559466.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:47.162Z,1520559467.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:47.566Z,1520559467.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:47.966Z,1520559467.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:48.362Z,1520559468.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:48.770Z,1520559468.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:49.162Z,1520559469.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:49.562Z,1520559469.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:49.967Z,1520559469.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:50.374Z,1520559470.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:50.774Z,1520559470.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:51.174Z,1520559471.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:51.572Z,1520559471.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:51.952Z,1520559471.952 [NAL9602](INFO): SBD MO Status=2, MOMSN=4911, MT Status=2, MTMSN=0
2018-03-09T01:37:51.952Z,1520559471.952 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-09T01:37:51.969Z,1520559471.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:52.403Z,1520559472.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:52.775Z,1520559472.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:53.167Z,1520559473.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:53.575Z,1520559473.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:53.974Z,1520559473.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:54.375Z,1520559474.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:54.780Z,1520559474.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:55.175Z,1520559475.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:55.569Z,1520559475.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:55.969Z,1520559475.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:56.377Z,1520559476.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:56.777Z,1520559476.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:57.166Z,1520559477.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:57.562Z,1520559477.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:57.964Z,1520559477.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:58.371Z,1520559478.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:58.779Z,1520559478.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:59.174Z,1520559479.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:59.575Z,1520559479.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:37:59.975Z,1520559479.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:00.384Z,1520559480.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:00.786Z,1520559480.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:01.179Z,1520559481.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:01.564Z,1520559481.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:01.977Z,1520559481.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:02.374Z,1520559482.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:02.769Z,1520559482.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:03.166Z,1520559483.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:03.590Z,1520559483.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:03.985Z,1520559483.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:04.366Z,1520559484.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:04.766Z,1520559484.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:05.171Z,1520559485.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:05.575Z,1520559485.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:05.975Z,1520559485.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:06.376Z,1520559486.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:06.775Z,1520559486.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:07.175Z,1520559487.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:07.573Z,1520559487.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:07.974Z,1520559487.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:08.383Z,1520559488.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:08.778Z,1520559488.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:09.169Z,1520559489.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:09.573Z,1520559489.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:09.620Z,1520559489.620 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-09T01:33:09.6Z
2018-03-09T01:38:09.620Z,1520559489.620 [Default:CheckIn:Read_GPS] Stopped
2018-03-09T01:38:09.620Z,1520559489.620 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-09T01:38:09.961Z,1520559489.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:10.490Z,1520559490.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:13.650Z,1520559493.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:13.782Z,1520559493.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:14.157Z,1520559494.157 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180308T074127/Courier0432.lzma
2018-03-09T01:38:14.183Z,1520559494.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:14.571Z,1520559494.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:14.948Z,1520559494.948 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0432.lzma.bak
2018-03-09T01:38:14.948Z,1520559494.948 [DataOverHttps](INFO): SBD MOMSN=7991019
2018-03-09T01:38:14.983Z,1520559494.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:15.568Z,1520559495.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:15.772Z,1520559495.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:18.975Z,1520559498.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:19.105Z,1520559499.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:19.484Z,1520559499.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:19.883Z,1520559499.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:20.284Z,1520559500.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:20.681Z,1520559500.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:21.093Z,1520559501.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:24.389Z,1520559504.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:24.509Z,1520559504.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:24.881Z,1520559504.881 [DataOverHttps](INFO): Sending 215 bytes from file Logs/20180308T074127/Express0433.lzma
2018-03-09T01:38:24.913Z,1520559504.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:25.323Z,1520559505.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:25.676Z,1520559505.676 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0433.lzma.bak
2018-03-09T01:38:25.676Z,1520559505.676 [DataOverHttps](INFO): SBD MOMSN=7991022
2018-03-09T01:38:25.713Z,1520559505.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:26.362Z,1520559506.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:26.381Z,1520559506.381 [Default:CheckIn:Read_Iridium] Stopped
2018-03-09T01:38:26.381Z,1520559506.381 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-09T01:38:26.381Z,1520559506.381 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-09T01:38:26.522Z,1520559506.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:26.907Z,1520559506.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:30.137Z,1520559510.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:30.264Z,1520559510.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:30.640Z,1520559510.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:31.037Z,1520559511.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:31.434Z,1520559511.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:31.833Z,1520559511.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:32.244Z,1520559512.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:32.635Z,1520559512.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:33.043Z,1520559513.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:33.435Z,1520559513.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:33.825Z,1520559513.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:34.233Z,1520559514.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:34.644Z,1520559514.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:35.022Z,1520559515.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:35.433Z,1520559515.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:35.835Z,1520559515.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:36.222Z,1520559516.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:36.634Z,1520559516.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:37.040Z,1520559517.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:37.429Z,1520559517.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:37.826Z,1520559517.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:38.254Z,1520559518.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:38.646Z,1520559518.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:39.027Z,1520559519.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:39.445Z,1520559519.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:39.826Z,1520559519.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:40.226Z,1520559520.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:40.626Z,1520559520.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:41.032Z,1520559521.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:41.434Z,1520559521.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:41.830Z,1520559521.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:42.230Z,1520559522.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:42.645Z,1520559522.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:43.034Z,1520559523.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:43.430Z,1520559523.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:43.832Z,1520559523.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:44.241Z,1520559524.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:44.635Z,1520559524.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:45.029Z,1520559525.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:45.422Z,1520559525.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:45.826Z,1520559525.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:46.227Z,1520559526.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:46.626Z,1520559526.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:47.045Z,1520559527.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:47.445Z,1520559527.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:47.850Z,1520559527.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:48.247Z,1520559528.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:48.626Z,1520559528.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:49.030Z,1520559529.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:49.426Z,1520559529.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:49.826Z,1520559529.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:50.226Z,1520559530.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:50.630Z,1520559530.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:51.027Z,1520559531.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:51.426Z,1520559531.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:51.845Z,1520559531.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:52.245Z,1520559532.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:52.645Z,1520559532.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:53.046Z,1520559533.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:53.431Z,1520559533.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:53.833Z,1520559533.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:54.235Z,1520559534.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:54.633Z,1520559534.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:55.029Z,1520559535.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:55.432Z,1520559535.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:55.833Z,1520559535.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:56.235Z,1520559536.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:56.641Z,1520559536.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:57.042Z,1520559537.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:57.446Z,1520559537.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:57.849Z,1520559537.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:58.229Z,1520559538.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:58.639Z,1520559538.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:59.028Z,1520559539.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:59.446Z,1520559539.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:38:59.822Z,1520559539.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:00.226Z,1520559540.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:00.256Z,1520559540.256 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T01:39:00.256Z,1520559540.256 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-03-09T01:39:00.256Z,1520559540.256 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T01:39:00.269Z,1520559540.269 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T01:39:00.630Z,1520559540.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:00.671Z,1520559540.671 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T01:39:00.671Z,1520559540.671 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-03-09T01:39:01.022Z,1520559541.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:01.062Z,1520559541.062 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T01:39:01.063Z,1520559541.063 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T01:39:01.063Z,1520559541.063 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T01:39:01.426Z,1520559541.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:01.837Z,1520559541.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:02.233Z,1520559542.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:02.638Z,1520559542.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:03.037Z,1520559543.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:03.422Z,1520559543.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:03.830Z,1520559543.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:04.226Z,1520559544.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:04.626Z,1520559544.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:05.034Z,1520559545.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:05.434Z,1520559545.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:05.835Z,1520559545.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:06.242Z,1520559546.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:06.640Z,1520559546.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:07.043Z,1520559547.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:07.445Z,1520559547.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:07.857Z,1520559547.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:08.236Z,1520559548.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:08.633Z,1520559548.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:09.033Z,1520559549.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:09.433Z,1520559549.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:09.838Z,1520559549.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:10.229Z,1520559550.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:10.622Z,1520559550.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:11.029Z,1520559551.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:11.433Z,1520559551.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:11.851Z,1520559551.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:12.250Z,1520559552.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:12.645Z,1520559552.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:13.046Z,1520559553.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:13.430Z,1520559553.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:13.846Z,1520559553.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:14.227Z,1520559554.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:14.630Z,1520559554.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:15.026Z,1520559555.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:15.426Z,1520559555.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:15.827Z,1520559555.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:16.227Z,1520559556.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:16.651Z,1520559556.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:17.041Z,1520559557.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:17.427Z,1520559557.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:17.827Z,1520559557.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:18.227Z,1520559558.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:18.635Z,1520559558.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:19.036Z,1520559559.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:19.442Z,1520559559.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:19.850Z,1520559559.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:20.231Z,1520559560.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:20.635Z,1520559560.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:21.035Z,1520559561.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:21.435Z,1520559561.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:21.839Z,1520559561.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:22.234Z,1520559562.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:22.639Z,1520559562.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:23.031Z,1520559563.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:23.442Z,1520559563.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:23.836Z,1520559563.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:24.229Z,1520559564.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:24.647Z,1520559564.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:25.043Z,1520559565.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:25.424Z,1520559565.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:25.830Z,1520559565.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:26.226Z,1520559566.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:26.626Z,1520559566.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:27.041Z,1520559567.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:30.302Z,1520559570.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:30.431Z,1520559570.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:30.793Z,1520559570.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:31.186Z,1520559571.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:31.584Z,1520559571.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:31.984Z,1520559571.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:32.405Z,1520559572.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:32.816Z,1520559572.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:33.192Z,1520559573.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:33.588Z,1520559573.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:33.983Z,1520559573.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:34.399Z,1520559574.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:34.793Z,1520559574.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:35.179Z,1520559575.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:35.587Z,1520559575.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:35.992Z,1520559575.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:36.400Z,1520559576.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:36.805Z,1520559576.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:37.204Z,1520559577.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:37.580Z,1520559577.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:38.021Z,1520559578.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:38.382Z,1520559578.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:38.782Z,1520559578.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:39.201Z,1520559579.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:39.597Z,1520559579.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:39.988Z,1520559579.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:40.385Z,1520559580.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:40.810Z,1520559580.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:41.206Z,1520559581.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:41.624Z,1520559581.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:42.003Z,1520559582.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:42.413Z,1520559582.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:42.785Z,1520559582.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:43.182Z,1520559583.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:43.581Z,1520559583.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:44.011Z,1520559584.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:44.406Z,1520559584.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:44.786Z,1520559584.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:45.184Z,1520559585.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:45.593Z,1520559585.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:46.008Z,1520559586.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:46.397Z,1520559586.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:46.801Z,1520559586.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:47.183Z,1520559587.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:47.589Z,1520559587.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:47.987Z,1520559587.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:48.382Z,1520559588.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:48.798Z,1520559588.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:49.182Z,1520559589.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:49.576Z,1520559589.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:49.982Z,1520559589.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:50.382Z,1520559590.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:50.794Z,1520559590.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:51.201Z,1520559591.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:51.601Z,1520559591.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:52.002Z,1520559592.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:52.394Z,1520559592.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:52.791Z,1520559592.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:53.179Z,1520559593.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:53.588Z,1520559593.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:53.992Z,1520559593.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:54.390Z,1520559594.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:54.785Z,1520559594.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:55.182Z,1520559595.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:55.602Z,1520559595.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:55.995Z,1520559595.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:56.421Z,1520559596.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:56.802Z,1520559596.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:57.201Z,1520559597.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:57.594Z,1520559597.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:57.985Z,1520559597.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:58.388Z,1520559598.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:58.798Z,1520559598.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:59.178Z,1520559599.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:59.582Z,1520559599.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:39:59.978Z,1520559599.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:00.378Z,1520559600.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:00.800Z,1520559600.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:01.206Z,1520559601.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:01.602Z,1520559601.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:02.017Z,1520559602.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:02.382Z,1520559602.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:02.794Z,1520559602.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:03.189Z,1520559603.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:03.593Z,1520559603.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:03.981Z,1520559603.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:04.394Z,1520559604.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:04.782Z,1520559604.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:05.185Z,1520559605.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:05.605Z,1520559605.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:06.006Z,1520559606.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:06.402Z,1520559606.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:06.807Z,1520559606.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:07.192Z,1520559607.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:07.585Z,1520559607.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:07.987Z,1520559607.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:08.393Z,1520559608.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:08.794Z,1520559608.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:09.188Z,1520559609.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:09.583Z,1520559609.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:09.983Z,1520559609.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:10.391Z,1520559610.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:10.805Z,1520559610.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:11.190Z,1520559611.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:11.601Z,1520559611.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:11.992Z,1520559611.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:12.385Z,1520559612.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:12.782Z,1520559612.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:13.182Z,1520559613.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:13.580Z,1520559613.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:13.986Z,1520559613.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:14.378Z,1520559614.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:14.778Z,1520559614.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:15.186Z,1520559615.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:15.595Z,1520559615.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:15.994Z,1520559615.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:16.395Z,1520559616.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:16.797Z,1520559616.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:17.193Z,1520559617.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:17.587Z,1520559617.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:17.987Z,1520559617.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:18.390Z,1520559618.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:18.795Z,1520559618.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:19.194Z,1520559619.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:19.583Z,1520559619.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:19.991Z,1520559619.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:20.392Z,1520559620.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:20.791Z,1520559620.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:21.205Z,1520559621.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:21.597Z,1520559621.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:21.992Z,1520559621.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:22.393Z,1520559622.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:22.778Z,1520559622.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:23.186Z,1520559623.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:23.598Z,1520559623.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:23.982Z,1520559623.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:24.382Z,1520559624.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:24.782Z,1520559624.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:25.188Z,1520559625.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:25.583Z,1520559625.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:25.988Z,1520559625.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:26.402Z,1520559626.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:26.804Z,1520559626.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:27.201Z,1520559627.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:30.458Z,1520559630.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:30.603Z,1520559630.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:30.968Z,1520559630.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:31.369Z,1520559631.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:31.769Z,1520559631.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:32.181Z,1520559632.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:32.572Z,1520559632.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:32.952Z,1520559632.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:33.358Z,1520559633.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:33.755Z,1520559633.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:34.152Z,1520559634.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:34.570Z,1520559634.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:34.954Z,1520559634.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:35.352Z,1520559635.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:35.758Z,1520559635.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:36.154Z,1520559636.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:36.575Z,1520559636.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:36.984Z,1520559636.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:37.378Z,1520559637.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:37.777Z,1520559637.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:38.154Z,1520559638.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:38.551Z,1520559638.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:38.952Z,1520559638.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:39.355Z,1520559639.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:39.758Z,1520559639.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:40.132Z,1520559640.132 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-09T01:40:40.148Z,1520559640.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:40.567Z,1520559640.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:40.959Z,1520559640.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:41.352Z,1520559641.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:41.766Z,1520559641.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:42.155Z,1520559642.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:42.561Z,1520559642.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:42.963Z,1520559642.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:43.359Z,1520559643.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:43.758Z,1520559643.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:44.160Z,1520559644.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:44.562Z,1520559644.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:44.963Z,1520559644.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:45.372Z,1520559645.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:45.772Z,1520559645.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:46.150Z,1520559646.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:46.556Z,1520559646.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:46.975Z,1520559646.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:47.352Z,1520559647.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:47.754Z,1520559647.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:48.163Z,1520559648.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:48.551Z,1520559648.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:48.959Z,1520559648.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:49.358Z,1520559649.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:49.758Z,1520559649.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:50.159Z,1520559650.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:50.560Z,1520559650.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:50.960Z,1520559650.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:51.371Z,1520559651.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:51.772Z,1520559651.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:52.159Z,1520559652.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:52.562Z,1520559652.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:52.966Z,1520559652.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:53.358Z,1520559653.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:53.761Z,1520559653.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:54.160Z,1520559654.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:54.551Z,1520559654.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:54.953Z,1520559654.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:55.353Z,1520559655.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:55.758Z,1520559655.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:56.154Z,1520559656.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:56.554Z,1520559656.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:56.950Z,1520559656.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:57.354Z,1520559657.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:57.758Z,1520559657.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:58.154Z,1520559658.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:58.554Z,1520559658.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:58.958Z,1520559658.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:59.350Z,1520559659.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:40:59.753Z,1520559659.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:00.162Z,1520559660.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:00.560Z,1520559660.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:00.961Z,1520559660.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:01.361Z,1520559661.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:01.758Z,1520559661.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:02.161Z,1520559662.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:02.569Z,1520559662.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:02.963Z,1520559662.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:03.364Z,1520559663.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:03.766Z,1520559663.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:04.164Z,1520559664.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:04.566Z,1520559664.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:04.957Z,1520559664.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:05.364Z,1520559665.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:05.764Z,1520559665.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:06.160Z,1520559666.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:06.563Z,1520559666.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:06.962Z,1520559666.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:07.360Z,1520559667.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:07.766Z,1520559667.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:08.162Z,1520559668.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:08.551Z,1520559668.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:08.949Z,1520559668.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:09.363Z,1520559669.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:09.762Z,1520559669.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:10.162Z,1520559670.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:10.562Z,1520559670.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:10.934Z,1520559670.934 [NAL9602](INFO): Powering down
2018-03-09T01:41:10.952Z,1520559670.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:11.366Z,1520559671.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:11.773Z,1520559671.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:12.150Z,1520559672.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:12.566Z,1520559672.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:12.973Z,1520559672.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:13.346Z,1520559673.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:13.766Z,1520559673.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:14.162Z,1520559674.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:14.551Z,1520559674.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:14.966Z,1520559674.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:15.361Z,1520559675.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:15.766Z,1520559675.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:16.166Z,1520559676.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:16.562Z,1520559676.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:16.952Z,1520559676.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:17.350Z,1520559677.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:17.773Z,1520559677.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:18.151Z,1520559678.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:18.563Z,1520559678.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:18.963Z,1520559678.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:19.351Z,1520559679.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:19.754Z,1520559679.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:20.158Z,1520559680.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:20.554Z,1520559680.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:20.962Z,1520559680.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:21.362Z,1520559681.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:21.759Z,1520559681.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:22.163Z,1520559682.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:22.561Z,1520559682.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:22.959Z,1520559682.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:23.362Z,1520559683.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:23.762Z,1520559683.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:24.162Z,1520559684.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:24.567Z,1520559684.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:24.960Z,1520559684.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:25.358Z,1520559685.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:25.769Z,1520559685.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:26.166Z,1520559686.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:26.558Z,1520559686.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:26.962Z,1520559686.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:27.362Z,1520559687.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:30.538Z,1520559690.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:30.665Z,1520559690.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:31.031Z,1520559691.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:31.420Z,1520559691.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:31.828Z,1520559691.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:32.235Z,1520559692.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:32.624Z,1520559692.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:33.027Z,1520559693.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:33.424Z,1520559693.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:33.830Z,1520559693.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:34.226Z,1520559694.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:34.624Z,1520559694.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:35.023Z,1520559695.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:35.423Z,1520559695.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:35.831Z,1520559695.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:36.226Z,1520559696.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:36.632Z,1520559696.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:37.035Z,1520559697.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:37.421Z,1520559697.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:37.826Z,1520559697.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:38.226Z,1520559698.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:38.622Z,1520559698.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:39.024Z,1520559699.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:39.425Z,1520559699.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:39.825Z,1520559699.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:40.229Z,1520559700.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:40.621Z,1520559700.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:41.053Z,1520559701.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:41.437Z,1520559701.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:41.830Z,1520559701.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:42.234Z,1520559702.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:42.620Z,1520559702.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:43.019Z,1520559703.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:43.414Z,1520559703.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:43.854Z,1520559703.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:44.230Z,1520559704.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:44.629Z,1520559704.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:45.040Z,1520559705.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:45.437Z,1520559705.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:45.818Z,1520559705.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:46.223Z,1520559706.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:46.626Z,1520559706.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:47.019Z,1520559707.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:47.411Z,1520559707.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:47.818Z,1520559707.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:48.223Z,1520559708.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:48.625Z,1520559708.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:49.024Z,1520559709.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:49.430Z,1520559709.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:49.830Z,1520559709.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:50.224Z,1520559710.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:50.626Z,1520559710.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:51.023Z,1520559711.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:51.435Z,1520559711.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:51.825Z,1520559711.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:52.230Z,1520559712.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:52.635Z,1520559712.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:53.014Z,1520559713.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:53.415Z,1520559713.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:53.835Z,1520559713.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:54.226Z,1520559714.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:54.614Z,1520559714.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:55.018Z,1520559715.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:55.413Z,1520559715.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:55.831Z,1520559715.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:56.218Z,1520559716.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:56.630Z,1520559716.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:57.015Z,1520559717.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:57.418Z,1520559717.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:57.818Z,1520559717.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:58.218Z,1520559718.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:58.618Z,1520559718.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:59.014Z,1520559719.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:59.414Z,1520559719.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:41:59.837Z,1520559719.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:00.289Z,1520559720.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:00.619Z,1520559720.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:01.018Z,1520559721.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:01.418Z,1520559721.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:01.460Z,1520559721.460 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T01:42:01.460Z,1520559721.460 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-03-09T01:42:01.460Z,1520559721.460 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T01:42:01.473Z,1520559721.473 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T01:42:01.823Z,1520559721.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:01.873Z,1520559721.873 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T01:42:01.873Z,1520559721.873 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-03-09T01:42:02.229Z,1520559722.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:02.247Z,1520559722.247 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T01:42:02.247Z,1520559722.247 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T01:42:02.248Z,1520559722.248 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T01:42:02.622Z,1520559722.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:03.023Z,1520559723.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:03.425Z,1520559723.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:03.822Z,1520559723.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:04.226Z,1520559724.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:04.625Z,1520559724.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:05.026Z,1520559725.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:05.423Z,1520559725.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:05.826Z,1520559725.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:06.222Z,1520559726.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:06.621Z,1520559726.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:07.024Z,1520559727.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:07.423Z,1520559727.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:07.823Z,1520559727.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:07.858Z,1520559727.858 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-09T01:42:08.221Z,1520559728.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:08.630Z,1520559728.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:09.015Z,1520559729.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:09.430Z,1520559729.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:09.817Z,1520559729.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:10.230Z,1520559730.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:10.618Z,1520559730.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:11.019Z,1520559731.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:11.412Z,1520559731.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:11.838Z,1520559731.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:12.227Z,1520559732.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:12.622Z,1520559732.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:13.034Z,1520559733.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:13.427Z,1520559733.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:13.831Z,1520559733.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:14.226Z,1520559734.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:14.630Z,1520559734.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:15.018Z,1520559735.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:15.418Z,1520559735.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:15.818Z,1520559735.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:16.226Z,1520559736.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:16.626Z,1520559736.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:17.027Z,1520559737.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:17.421Z,1520559737.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:17.824Z,1520559737.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:18.226Z,1520559738.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:18.624Z,1520559738.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:19.037Z,1520559739.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:19.422Z,1520559739.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:19.801Z,1520559739.801 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-03-09T01:42:19.801Z,1520559739.801 [DropWeight] Hardware Fault, FailCount= 1
2018-03-09T01:42:19.802Z,1520559739.802 [DropWeight](ERROR): Hardware Fault
2018-03-09T01:42:19.837Z,1520559739.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:19.893Z,1520559739.893 [CBIT](INFO): Critical error at 20180309T014219
2018-03-09T01:42:19.895Z,1520559739.895 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-03-09T01:42:19.895Z,1520559739.895 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-03-09T01:42:20.235Z,1520559740.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:20.292Z,1520559740.292 [CBIT](INFO): Critical error at 20180309T014219
2018-03-09T01:42:20.629Z,1520559740.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:21.015Z,1520559741.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:21.438Z,1520559741.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:21.828Z,1520559741.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:22.227Z,1520559742.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:22.621Z,1520559742.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:23.018Z,1520559743.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:23.415Z,1520559743.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:23.819Z,1520559743.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:24.217Z,1520559744.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:24.615Z,1520559744.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:25.017Z,1520559745.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:25.417Z,1520559745.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:25.818Z,1520559745.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:26.218Z,1520559746.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:26.623Z,1520559746.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:27.018Z,1520559747.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:27.423Z,1520559747.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:30.585Z,1520559750.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:30.713Z,1520559750.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:31.072Z,1520559751.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:31.462Z,1520559751.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:31.877Z,1520559751.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:32.285Z,1520559752.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:32.674Z,1520559752.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:33.062Z,1520559753.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:33.474Z,1520559753.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:33.862Z,1520559753.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:34.262Z,1520559754.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:34.674Z,1520559754.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:35.062Z,1520559755.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:35.460Z,1520559755.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:35.877Z,1520559755.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:36.277Z,1520559756.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:36.663Z,1520559756.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:37.074Z,1520559757.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:37.478Z,1520559757.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:37.877Z,1520559757.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:38.285Z,1520559758.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:38.674Z,1520559758.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:39.059Z,1520559759.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:39.487Z,1520559759.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:39.866Z,1520559759.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:40.278Z,1520559760.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:40.686Z,1520559760.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:41.066Z,1520559761.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:41.459Z,1520559761.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:41.866Z,1520559761.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:42.270Z,1520559762.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:42.664Z,1520559762.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:43.062Z,1520559763.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:43.466Z,1520559763.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:43.862Z,1520559763.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:44.266Z,1520559764.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:44.670Z,1520559764.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:45.063Z,1520559765.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:45.466Z,1520559765.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:45.870Z,1520559765.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:46.266Z,1520559766.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:46.678Z,1520559766.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:47.074Z,1520559767.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:47.462Z,1520559767.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:47.866Z,1520559767.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:48.270Z,1520559768.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:48.663Z,1520559768.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:49.067Z,1520559769.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:49.474Z,1520559769.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:49.867Z,1520559769.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:50.271Z,1520559770.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:50.672Z,1520559770.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:51.078Z,1520559771.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:51.475Z,1520559771.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:51.874Z,1520559771.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:52.273Z,1520559772.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:52.673Z,1520559772.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:53.079Z,1520559773.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:53.469Z,1520559773.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:53.878Z,1520559773.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:54.269Z,1520559774.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:54.674Z,1520559774.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:55.074Z,1520559775.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:55.472Z,1520559775.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:55.878Z,1520559775.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:56.274Z,1520559776.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:56.678Z,1520559776.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:57.062Z,1520559777.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:57.474Z,1520559777.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:57.878Z,1520559777.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:58.273Z,1520559778.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:58.682Z,1520559778.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:59.085Z,1520559779.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:59.462Z,1520559779.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:42:59.866Z,1520559779.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:00.266Z,1520559780.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:00.667Z,1520559780.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:01.066Z,1520559781.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:01.474Z,1520559781.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:01.866Z,1520559781.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:02.266Z,1520559782.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:02.664Z,1520559782.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:03.070Z,1520559783.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:03.470Z,1520559783.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:03.871Z,1520559783.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:04.269Z,1520559784.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:04.671Z,1520559784.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:05.071Z,1520559785.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:05.471Z,1520559785.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:05.879Z,1520559785.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:06.265Z,1520559786.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:06.674Z,1520559786.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:07.083Z,1520559787.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:07.471Z,1520559787.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:07.873Z,1520559787.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:08.274Z,1520559788.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:08.671Z,1520559788.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:09.073Z,1520559789.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:09.476Z,1520559789.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:09.869Z,1520559789.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:10.275Z,1520559790.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:10.672Z,1520559790.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:11.070Z,1520559791.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:11.477Z,1520559791.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:11.873Z,1520559791.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:12.269Z,1520559792.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:12.673Z,1520559792.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:13.074Z,1520559793.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:13.473Z,1520559793.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:13.869Z,1520559793.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:14.273Z,1520559794.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:14.669Z,1520559794.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:15.079Z,1520559795.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:15.472Z,1520559795.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:15.876Z,1520559795.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:16.277Z,1520559796.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:16.674Z,1520559796.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:17.070Z,1520559797.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:17.469Z,1520559797.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:17.873Z,1520559797.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:18.273Z,1520559798.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:18.678Z,1520559798.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:19.073Z,1520559799.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:19.473Z,1520559799.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:19.878Z,1520559799.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:20.283Z,1520559800.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:20.669Z,1520559800.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:21.069Z,1520559801.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:21.483Z,1520559801.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:21.869Z,1520559801.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:22.273Z,1520559802.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:22.683Z,1520559802.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:23.063Z,1520559803.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:23.473Z,1520559803.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:23.873Z,1520559803.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:24.277Z,1520559804.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:24.678Z,1520559804.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:25.073Z,1520559805.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:25.463Z,1520559805.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:25.873Z,1520559805.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:26.285Z,1520559806.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:26.664Z,1520559806.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:26.694Z,1520559806.694 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-09T01:43:26.695Z,1520559806.695 [Default:CheckIn:C.Wait] Stopped
2018-03-09T01:43:26.695Z,1520559806.695 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-09T01:43:26.695Z,1520559806.695 [Default:CheckIn:D] Running Loop=1
2018-03-09T01:43:27.085Z,1520559807.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:27.105Z,1520559807.105 [Default:CheckIn:D] Stopped
2018-03-09T01:43:27.106Z,1520559807.106 [Default:CheckIn:E] Running Loop=1
2018-03-09T01:43:27.486Z,1520559807.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:27.506Z,1520559807.506 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1077.705013 min 
2018-03-09T01:43:27.507Z,1520559807.507 [Default:CheckIn:E] Stopped
2018-03-09T01:43:27.507Z,1520559807.507 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-09T01:43:27.507Z,1520559807.507 [Default:CheckIn] Stopped
2018-03-09T01:43:27.507Z,1520559807.507 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-09T01:43:27.507Z,1520559807.507 [Default:CheckIn](INFO): Running loop #109
2018-03-09T01:43:27.507Z,1520559807.507 [Default:CheckIn] Running Loop=109
2018-03-09T01:43:27.507Z,1520559807.507 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-09T01:43:27.507Z,1520559807.507 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-09T01:43:30.682Z,1520559810.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:30.787Z,1520559810.787 [NAL9602](INFO): Powering up
2018-03-09T01:43:30.804Z,1520559810.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:31.199Z,1520559811.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:31.589Z,1520559811.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:31.999Z,1520559811.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:32.392Z,1520559812.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:32.789Z,1520559812.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:33.186Z,1520559813.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:33.585Z,1520559813.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:33.992Z,1520559813.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:34.390Z,1520559814.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:34.792Z,1520559814.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:35.183Z,1520559815.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:35.586Z,1520559815.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:35.987Z,1520559815.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:36.385Z,1520559816.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:36.791Z,1520559816.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:37.190Z,1520559817.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:37.588Z,1520559817.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:37.996Z,1520559817.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:38.393Z,1520559818.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:38.798Z,1520559818.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:39.189Z,1520559819.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:39.603Z,1520559819.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:39.985Z,1520559819.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:40.390Z,1520559820.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:40.824Z,1520559820.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:41.186Z,1520559821.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:41.616Z,1520559821.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:41.974Z,1520559821.974 [NAL9602](INFO): NAL9602 initialized
2018-03-09T01:43:41.993Z,1520559821.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:42.406Z,1520559822.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:42.827Z,1520559822.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:43.205Z,1520559823.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:43.609Z,1520559823.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:43.994Z,1520559823.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:44.389Z,1520559824.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:44.788Z,1520559824.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:45.214Z,1520559825.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:45.598Z,1520559825.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:45.992Z,1520559825.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:46.394Z,1520559826.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:46.798Z,1520559826.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:47.193Z,1520559827.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:47.595Z,1520559827.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:48.001Z,1520559828.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:48.392Z,1520559828.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:48.803Z,1520559828.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:49.186Z,1520559829.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:49.586Z,1520559829.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:49.998Z,1520559829.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:50.401Z,1520559830.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:50.794Z,1520559830.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:51.193Z,1520559831.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:51.598Z,1520559831.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:51.990Z,1520559831.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:52.392Z,1520559832.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:52.797Z,1520559832.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:53.192Z,1520559833.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:53.593Z,1520559833.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:53.993Z,1520559833.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:54.397Z,1520559834.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:54.793Z,1520559834.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:55.197Z,1520559835.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:55.587Z,1520559835.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:55.985Z,1520559835.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:56.395Z,1520559836.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:56.791Z,1520559836.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:57.188Z,1520559837.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:57.594Z,1520559837.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:57.995Z,1520559837.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:58.398Z,1520559838.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:58.789Z,1520559838.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:59.198Z,1520559839.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:59.580Z,1520559839.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:43:59.986Z,1520559839.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:00.390Z,1520559840.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:00.786Z,1520559840.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:01.193Z,1520559841.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:01.617Z,1520559841.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:01.992Z,1520559841.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:02.391Z,1520559842.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:02.795Z,1520559842.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:03.184Z,1520559843.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:03.601Z,1520559843.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:03.987Z,1520559843.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:04.390Z,1520559844.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:04.786Z,1520559844.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:05.190Z,1520559845.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:05.587Z,1520559845.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:06.023Z,1520559846.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:06.388Z,1520559846.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:06.791Z,1520559846.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:07.191Z,1520559847.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:07.591Z,1520559847.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:07.988Z,1520559847.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:08.396Z,1520559848.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:08.794Z,1520559848.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:09.192Z,1520559849.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:09.610Z,1520559849.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:09.986Z,1520559849.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:10.386Z,1520559850.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:10.794Z,1520559850.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:11.194Z,1520559851.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:11.587Z,1520559851.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:11.993Z,1520559851.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:12.391Z,1520559852.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:12.795Z,1520559852.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:13.200Z,1520559853.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:13.595Z,1520559853.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:13.974Z,1520559853.974 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-09T01:44:14.056Z,1520559854.056 [NAL9602](FAULT): received: 
+CSQ:0

OK11, 2, 0, 0, 0

OK
2018-03-09T01:44:14.057Z,1520559854.057 [NAL9602] Data Fault, FailCount= 1
2018-03-09T01:44:14.057Z,1520559854.057 [NAL9602](ERROR): Data Fault
2018-03-09T01:44:14.077Z,1520559854.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:14.150Z,1520559854.150 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-09T01:44:14.373Z,1520559854.373 [NAL9602](INFO): Powering down
2018-03-09T01:44:14.406Z,1520559854.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:14.785Z,1520559854.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:15.186Z,1520559855.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:15.247Z,1520559855.247 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-09T01:44:15.247Z,1520559855.247 [NAL9602] No Fault, FailCount= 1
2018-03-09T01:44:15.587Z,1520559855.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:15.992Z,1520559855.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:16.394Z,1520559856.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:16.791Z,1520559856.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:17.197Z,1520559857.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:17.590Z,1520559857.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:17.991Z,1520559857.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:18.386Z,1520559858.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:18.783Z,1520559858.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:19.190Z,1520559859.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:19.585Z,1520559859.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:19.986Z,1520559859.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:20.391Z,1520559860.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:20.790Z,1520559860.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:21.183Z,1520559861.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:21.590Z,1520559861.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:21.992Z,1520559861.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:22.394Z,1520559862.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:22.804Z,1520559862.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:23.195Z,1520559863.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:23.579Z,1520559863.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:23.986Z,1520559863.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:24.381Z,1520559864.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:24.782Z,1520559864.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:25.187Z,1520559865.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:25.585Z,1520559865.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:25.986Z,1520559865.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:26.390Z,1520559866.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:26.791Z,1520559866.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:27.190Z,1520559867.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:27.605Z,1520559867.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:30.861Z,1520559870.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:31.001Z,1520559871.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:31.362Z,1520559871.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:31.766Z,1520559871.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:32.158Z,1520559872.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:32.566Z,1520559872.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:32.964Z,1520559872.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:33.361Z,1520559873.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:33.762Z,1520559873.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:34.164Z,1520559874.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:34.563Z,1520559874.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:34.964Z,1520559874.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:35.364Z,1520559875.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:35.765Z,1520559875.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:36.164Z,1520559876.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:36.567Z,1520559876.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:36.966Z,1520559876.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:37.369Z,1520559877.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:37.765Z,1520559877.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:38.157Z,1520559878.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:38.570Z,1520559878.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:38.965Z,1520559878.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:39.363Z,1520559879.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:39.761Z,1520559879.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:40.170Z,1520559880.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:40.564Z,1520559880.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:40.974Z,1520559880.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:41.371Z,1520559881.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:41.765Z,1520559881.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:42.160Z,1520559882.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:42.558Z,1520559882.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:42.958Z,1520559882.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:43.359Z,1520559883.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:43.758Z,1520559883.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:44.155Z,1520559884.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:44.542Z,1520559884.542 [NAL9602](INFO): Powering up NAL9602
2018-03-09T01:44:44.559Z,1520559884.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:44.957Z,1520559884.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:45.355Z,1520559885.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:45.757Z,1520559885.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:46.164Z,1520559886.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:46.562Z,1520559886.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:46.978Z,1520559886.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:47.362Z,1520559887.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:47.762Z,1520559887.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:48.170Z,1520559888.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:48.565Z,1520559888.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:48.965Z,1520559888.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:49.366Z,1520559889.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:49.764Z,1520559889.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:50.151Z,1520559890.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:50.565Z,1520559890.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:50.966Z,1520559890.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:51.363Z,1520559891.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:51.765Z,1520559891.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:52.169Z,1520559892.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:52.563Z,1520559892.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:52.966Z,1520559892.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:53.365Z,1520559893.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:53.762Z,1520559893.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:54.165Z,1520559894.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:54.569Z,1520559894.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:54.976Z,1520559894.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:55.342Z,1520559895.342 [NAL9602](INFO): NAL9602 initialized
2018-03-09T01:44:55.361Z,1520559895.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:55.766Z,1520559895.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:56.179Z,1520559896.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:56.579Z,1520559896.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:56.977Z,1520559896.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:57.355Z,1520559897.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:57.759Z,1520559897.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:58.177Z,1520559898.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:58.555Z,1520559898.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:58.957Z,1520559898.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:59.358Z,1520559899.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:44:59.759Z,1520559899.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:00.162Z,1520559900.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:00.558Z,1520559900.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:00.962Z,1520559900.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:01.366Z,1520559901.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:01.763Z,1520559901.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:02.163Z,1520559902.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:02.563Z,1520559902.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:02.586Z,1520559902.586 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T01:45:02.586Z,1520559902.586 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-03-09T01:45:02.586Z,1520559902.586 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T01:45:02.611Z,1520559902.611 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T01:45:02.965Z,1520559902.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:03.017Z,1520559903.017 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T01:45:03.017Z,1520559903.017 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-03-09T01:45:03.366Z,1520559903.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:03.384Z,1520559903.384 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T01:45:03.384Z,1520559903.384 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T01:45:03.385Z,1520559903.385 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T01:45:03.766Z,1520559903.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:04.165Z,1520559904.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:04.564Z,1520559904.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:04.964Z,1520559904.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:05.365Z,1520559905.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:05.764Z,1520559905.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:06.165Z,1520559906.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:06.560Z,1520559906.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:06.977Z,1520559906.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:07.377Z,1520559907.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:07.761Z,1520559907.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:08.166Z,1520559908.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:08.565Z,1520559908.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:08.961Z,1520559908.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:09.356Z,1520559909.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:09.758Z,1520559909.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:10.158Z,1520559910.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:10.557Z,1520559910.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:10.977Z,1520559910.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:11.378Z,1520559911.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:11.758Z,1520559911.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:12.158Z,1520559912.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:12.558Z,1520559912.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:12.958Z,1520559912.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:13.362Z,1520559913.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:13.758Z,1520559913.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:14.175Z,1520559914.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:14.558Z,1520559914.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:14.974Z,1520559914.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:15.377Z,1520559915.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:15.776Z,1520559915.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:16.159Z,1520559916.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:16.558Z,1520559916.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:16.979Z,1520559916.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:17.359Z,1520559917.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:17.759Z,1520559917.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:18.159Z,1520559918.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:18.558Z,1520559918.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:18.958Z,1520559918.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:19.357Z,1520559919.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:19.762Z,1520559919.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:20.159Z,1520559920.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:20.559Z,1520559920.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:20.961Z,1520559920.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:21.363Z,1520559921.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:21.772Z,1520559921.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:22.175Z,1520559922.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:22.568Z,1520559922.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:22.987Z,1520559922.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:23.358Z,1520559923.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:23.762Z,1520559923.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:24.189Z,1520559924.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:24.565Z,1520559924.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:24.958Z,1520559924.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:25.358Z,1520559925.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:25.759Z,1520559925.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:26.162Z,1520559926.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:26.585Z,1520559926.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:26.965Z,1520559926.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:27.354Z,1520559927.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:27.762Z,1520559927.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:30.996Z,1520559930.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:31.103Z,1520559931.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:31.530Z,1520559931.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:31.907Z,1520559931.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:32.313Z,1520559932.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:32.715Z,1520559932.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:33.102Z,1520559933.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:33.509Z,1520559933.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:33.907Z,1520559933.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:34.309Z,1520559934.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:34.708Z,1520559934.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:35.117Z,1520559935.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:35.517Z,1520559935.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:35.910Z,1520559935.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:36.319Z,1520559936.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:36.698Z,1520559936.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:37.102Z,1520559937.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:37.502Z,1520559937.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:37.902Z,1520559937.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:38.301Z,1520559938.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:38.702Z,1520559938.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:39.107Z,1520559939.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:39.513Z,1520559939.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:39.921Z,1520559939.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:40.311Z,1520559940.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:40.711Z,1520559940.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:41.108Z,1520559941.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:41.512Z,1520559941.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:41.919Z,1520559941.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:42.309Z,1520559942.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:42.704Z,1520559942.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:43.104Z,1520559943.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:43.504Z,1520559943.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:43.931Z,1520559943.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:44.313Z,1520559944.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:44.701Z,1520559944.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:45.104Z,1520559945.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:45.513Z,1520559945.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:45.909Z,1520559945.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:46.311Z,1520559946.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:46.715Z,1520559946.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:47.105Z,1520559947.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:47.510Z,1520559947.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:47.914Z,1520559947.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:48.305Z,1520559948.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:48.707Z,1520559948.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:49.101Z,1520559949.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:49.517Z,1520559949.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:49.902Z,1520559949.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:50.302Z,1520559950.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:50.702Z,1520559950.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:51.102Z,1520559951.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:51.506Z,1520559951.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:51.902Z,1520559951.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:52.302Z,1520559952.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:52.721Z,1520559952.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:53.121Z,1520559953.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:53.503Z,1520559953.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:53.906Z,1520559953.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:54.302Z,1520559954.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:54.698Z,1520559954.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:55.102Z,1520559955.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:55.502Z,1520559955.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:55.906Z,1520559955.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:56.302Z,1520559956.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:56.707Z,1520559956.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:57.109Z,1520559957.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:57.507Z,1520559957.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:57.951Z,1520559957.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:58.311Z,1520559958.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:58.710Z,1520559958.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:59.111Z,1520559959.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:59.510Z,1520559959.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:45:59.909Z,1520559959.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:00.310Z,1520559960.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:00.714Z,1520559960.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:01.120Z,1520559961.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:01.521Z,1520559961.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:01.913Z,1520559961.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:02.314Z,1520559962.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:02.705Z,1520559962.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:03.112Z,1520559963.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:03.514Z,1520559963.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:03.905Z,1520559963.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:04.314Z,1520559964.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:04.709Z,1520559964.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:05.106Z,1520559965.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:05.512Z,1520559965.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:05.909Z,1520559965.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:06.305Z,1520559966.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:06.712Z,1520559966.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:07.100Z,1520559967.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:07.507Z,1520559967.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:07.914Z,1520559967.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:08.300Z,1520559968.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:08.714Z,1520559968.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:09.102Z,1520559969.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:09.500Z,1520559969.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:09.927Z,1520559969.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:10.322Z,1520559970.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:10.700Z,1520559970.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:11.107Z,1520559971.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:11.502Z,1520559971.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:11.906Z,1520559971.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:12.302Z,1520559972.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:12.702Z,1520559972.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:13.100Z,1520559973.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:13.502Z,1520559973.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:13.907Z,1520559973.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:14.303Z,1520559974.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:14.708Z,1520559974.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:15.107Z,1520559975.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:15.507Z,1520559975.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:15.907Z,1520559975.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:16.309Z,1520559976.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:16.709Z,1520559976.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:17.108Z,1520559977.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:17.510Z,1520559977.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:17.908Z,1520559977.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:18.320Z,1520559978.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:18.724Z,1520559978.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:19.102Z,1520559979.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:19.514Z,1520559979.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:19.902Z,1520559979.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:20.314Z,1520559980.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:20.702Z,1520559980.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:21.102Z,1520559981.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:21.500Z,1520559981.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:21.902Z,1520559981.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:22.315Z,1520559982.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:22.725Z,1520559982.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:23.124Z,1520559983.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:23.502Z,1520559983.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:23.901Z,1520559983.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:24.317Z,1520559984.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:24.702Z,1520559984.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:25.102Z,1520559985.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:25.502Z,1520559985.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:25.902Z,1520559985.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:26.302Z,1520559986.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:26.702Z,1520559986.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:27.121Z,1520559987.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:27.501Z,1520559987.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:27.902Z,1520559987.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:31.056Z,1520559991.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:31.181Z,1520559991.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:31.541Z,1520559991.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:31.939Z,1520559991.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:32.334Z,1520559992.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:32.747Z,1520559992.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:33.147Z,1520559993.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:33.530Z,1520559993.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:33.950Z,1520559993.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:34.351Z,1520559994.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:34.728Z,1520559994.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:35.151Z,1520559995.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:35.530Z,1520559995.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:35.926Z,1520559995.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:36.330Z,1520559996.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:36.730Z,1520559996.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:37.128Z,1520559997.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:37.549Z,1520559997.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:37.930Z,1520559997.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:38.326Z,1520559998.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:38.750Z,1520559998.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:39.130Z,1520559999.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:39.530Z,1520559999.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:39.931Z,1520559999.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:40.326Z,1520560000.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:40.728Z,1520560000.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:41.129Z,1520560001.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:41.530Z,1520560001.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:41.934Z,1520560001.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:42.330Z,1520560002.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:42.734Z,1520560002.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:43.128Z,1520560003.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:43.530Z,1520560003.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:43.930Z,1520560003.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:44.330Z,1520560004.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:44.731Z,1520560004.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:45.130Z,1520560005.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:45.531Z,1520560005.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:45.935Z,1520560005.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:46.331Z,1520560006.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:46.715Z,1520560006.715 [NAL9602](INFO): SBD MO Status=2, MOMSN=4911, MT Status=2, MTMSN=0
2018-03-09T01:46:46.715Z,1520560006.715 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-09T01:46:46.733Z,1520560006.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:47.163Z,1520560007.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:47.539Z,1520560007.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:47.935Z,1520560007.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:48.338Z,1520560008.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:48.742Z,1520560008.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:49.128Z,1520560009.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:49.538Z,1520560009.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:49.936Z,1520560009.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:50.335Z,1520560010.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:50.737Z,1520560010.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:51.145Z,1520560011.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:51.546Z,1520560011.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:51.941Z,1520560011.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:52.339Z,1520560012.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:52.725Z,1520560012.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:53.138Z,1520560013.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:53.539Z,1520560013.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:53.942Z,1520560013.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:54.347Z,1520560014.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:54.730Z,1520560014.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:55.145Z,1520560015.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:55.554Z,1520560015.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:55.942Z,1520560015.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:56.330Z,1520560016.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:56.730Z,1520560016.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:57.127Z,1520560017.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:57.528Z,1520560017.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:57.930Z,1520560017.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:58.330Z,1520560018.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:58.728Z,1520560018.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:59.137Z,1520560019.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:59.535Z,1520560019.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:46:59.939Z,1520560019.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:00.346Z,1520560020.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:00.738Z,1520560020.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:01.138Z,1520560021.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:01.537Z,1520560021.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:01.938Z,1520560021.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:02.336Z,1520560022.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:02.742Z,1520560022.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:03.143Z,1520560023.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:03.546Z,1520560023.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:03.952Z,1520560023.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:04.342Z,1520560024.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:04.727Z,1520560024.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:05.130Z,1520560025.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:05.530Z,1520560025.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:05.930Z,1520560025.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:06.330Z,1520560026.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:06.751Z,1520560026.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:07.130Z,1520560027.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:07.550Z,1520560027.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:07.957Z,1520560027.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:08.349Z,1520560028.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:08.731Z,1520560028.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:09.130Z,1520560029.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:09.528Z,1520560029.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:09.937Z,1520560029.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:10.338Z,1520560030.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:10.730Z,1520560030.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:11.135Z,1520560031.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:11.535Z,1520560031.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:11.935Z,1520560031.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:12.339Z,1520560032.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:12.739Z,1520560032.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:13.135Z,1520560033.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:13.538Z,1520560033.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:13.938Z,1520560033.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:14.333Z,1520560034.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:14.737Z,1520560034.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:15.137Z,1520560035.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:15.535Z,1520560035.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:15.937Z,1520560035.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:16.333Z,1520560036.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:16.749Z,1520560036.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:17.149Z,1520560037.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:17.538Z,1520560037.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:17.937Z,1520560037.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:18.333Z,1520560038.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:18.749Z,1520560038.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:19.144Z,1520560039.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:19.530Z,1520560039.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:19.930Z,1520560039.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:20.342Z,1520560040.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:20.729Z,1520560040.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:21.130Z,1520560041.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:21.530Z,1520560041.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:21.951Z,1520560041.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:22.327Z,1520560042.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:22.730Z,1520560042.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:23.135Z,1520560043.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:23.530Z,1520560043.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:23.929Z,1520560043.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:24.338Z,1520560044.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:24.734Z,1520560044.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:25.150Z,1520560045.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:25.545Z,1520560045.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:25.934Z,1520560045.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:26.337Z,1520560046.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:26.738Z,1520560046.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:27.140Z,1520560047.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:27.548Z,1520560047.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:27.948Z,1520560047.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:31.146Z,1520560051.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:31.262Z,1520560051.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:31.626Z,1520560051.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:32.015Z,1520560052.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:32.416Z,1520560052.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:32.818Z,1520560052.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:33.220Z,1520560053.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:33.613Z,1520560053.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:34.028Z,1520560054.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:34.435Z,1520560054.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:34.814Z,1520560054.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:35.215Z,1520560055.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:35.617Z,1520560055.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:36.030Z,1520560056.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:36.437Z,1520560056.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:36.819Z,1520560056.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:37.222Z,1520560057.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:37.620Z,1520560057.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:38.022Z,1520560058.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:38.412Z,1520560058.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:38.816Z,1520560058.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:39.215Z,1520560059.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:39.624Z,1520560059.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:40.019Z,1520560060.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:40.421Z,1520560060.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:40.819Z,1520560060.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:41.230Z,1520560061.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:41.612Z,1520560061.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:42.010Z,1520560062.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:42.434Z,1520560062.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:42.834Z,1520560062.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:43.212Z,1520560063.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:43.618Z,1520560063.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:44.030Z,1520560064.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:44.430Z,1520560064.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:44.810Z,1520560064.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:45.226Z,1520560065.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:45.616Z,1520560065.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:46.013Z,1520560066.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:46.458Z,1520560066.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:46.812Z,1520560066.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:47.217Z,1520560067.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:47.620Z,1520560067.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:48.019Z,1520560068.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:48.417Z,1520560068.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:48.823Z,1520560068.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:49.225Z,1520560069.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:49.618Z,1520560069.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:50.010Z,1520560070.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:50.418Z,1520560070.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:50.819Z,1520560070.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:51.235Z,1520560071.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:51.624Z,1520560071.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:52.026Z,1520560072.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:52.418Z,1520560072.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:52.821Z,1520560072.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:53.218Z,1520560073.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:53.619Z,1520560073.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:54.021Z,1520560074.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:54.410Z,1520560074.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:54.827Z,1520560074.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:55.221Z,1520560075.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:55.613Z,1520560075.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:56.019Z,1520560076.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:56.422Z,1520560076.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:56.818Z,1520560076.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:57.218Z,1520560077.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:57.613Z,1520560077.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:58.010Z,1520560078.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:58.423Z,1520560078.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:58.813Z,1520560078.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:59.210Z,1520560079.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:47:59.613Z,1520560079.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:00.035Z,1520560080.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:00.421Z,1520560080.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:00.806Z,1520560080.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:01.210Z,1520560081.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:01.613Z,1520560081.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:02.013Z,1520560082.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:02.410Z,1520560082.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:02.815Z,1520560082.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:03.208Z,1520560083.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:03.623Z,1520560083.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:03.649Z,1520560083.649 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T01:48:03.650Z,1520560083.650 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 21
2018-03-09T01:48:03.650Z,1520560083.650 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T01:48:03.695Z,1520560083.695 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T01:48:04.043Z,1520560084.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:04.135Z,1520560084.135 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T01:48:04.135Z,1520560084.135 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 21
2018-03-09T01:48:04.432Z,1520560084.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:04.450Z,1520560084.450 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T01:48:04.451Z,1520560084.451 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T01:48:04.451Z,1520560084.451 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T01:48:04.821Z,1520560084.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:05.220Z,1520560085.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:05.614Z,1520560085.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:06.011Z,1520560086.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:06.413Z,1520560086.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:06.815Z,1520560086.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:07.210Z,1520560087.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:07.611Z,1520560087.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:08.018Z,1520560088.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:08.417Z,1520560088.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:08.810Z,1520560088.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:09.210Z,1520560089.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:09.604Z,1520560089.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:10.023Z,1520560090.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:10.422Z,1520560090.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:10.812Z,1520560090.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:11.222Z,1520560091.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:11.622Z,1520560091.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:12.012Z,1520560092.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:12.426Z,1520560092.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:12.830Z,1520560092.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:13.230Z,1520560093.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:13.610Z,1520560093.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:14.015Z,1520560094.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:14.417Z,1520560094.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:14.814Z,1520560094.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:15.206Z,1520560095.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:15.608Z,1520560095.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:16.012Z,1520560096.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:16.420Z,1520560096.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:16.819Z,1520560096.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:17.236Z,1520560097.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:17.633Z,1520560097.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:18.017Z,1520560098.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:18.434Z,1520560098.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:18.810Z,1520560098.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:19.210Z,1520560099.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:19.625Z,1520560099.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:20.015Z,1520560100.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:20.414Z,1520560100.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:20.822Z,1520560100.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:21.221Z,1520560101.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:21.624Z,1520560101.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:22.060Z,1520560102.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:22.417Z,1520560102.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:22.817Z,1520560102.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:23.210Z,1520560103.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:23.614Z,1520560103.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:24.011Z,1520560104.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:24.416Z,1520560104.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:24.811Z,1520560104.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:25.210Z,1520560105.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:25.623Z,1520560105.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:26.021Z,1520560106.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:26.418Z,1520560106.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:26.838Z,1520560106.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:27.217Z,1520560107.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:27.609Z,1520560107.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:27.659Z,1520560107.659 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-09T01:43:27.5Z
2018-03-09T01:48:27.659Z,1520560107.659 [Default:CheckIn:Read_GPS] Stopped
2018-03-09T01:48:27.659Z,1520560107.659 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-09T01:48:28.016Z,1520560108.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:31.321Z,1520560111.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:31.446Z,1520560111.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:31.812Z,1520560111.812 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20180308T074127/Courier0436.lzma
2018-03-09T01:48:31.849Z,1520560111.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:32.235Z,1520560112.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:32.600Z,1520560112.600 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0436.lzma.bak
2018-03-09T01:48:32.600Z,1520560112.600 [DataOverHttps](INFO): SBD MOMSN=7991165
2018-03-09T01:48:32.638Z,1520560112.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:33.238Z,1520560113.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:33.422Z,1520560113.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:36.621Z,1520560116.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:36.757Z,1520560116.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:37.117Z,1520560117.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:37.521Z,1520560117.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:37.909Z,1520560117.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:38.302Z,1520560118.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:38.703Z,1520560118.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:41.958Z,1520560121.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:42.097Z,1520560122.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:42.428Z,1520560122.428 [DataOverHttps](INFO): Sending 237 bytes from file Logs/20180308T074127/Express0437.lzma
2018-03-09T01:48:42.477Z,1520560122.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:42.857Z,1520560122.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:43.224Z,1520560123.224 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0437.lzma.bak
2018-03-09T01:48:43.224Z,1520560123.224 [DataOverHttps](INFO): SBD MOMSN=7991169
2018-03-09T01:48:43.265Z,1520560123.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:43.857Z,1520560123.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:43.877Z,1520560123.877 [Default:CheckIn:Read_Iridium] Stopped
2018-03-09T01:48:43.877Z,1520560123.877 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-09T01:48:43.877Z,1520560123.877 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-09T01:48:44.038Z,1520560124.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:47.360Z,1520560127.360 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-09T01:48:47.376Z,1520560127.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:47.494Z,1520560127.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:47.876Z,1520560127.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:48.269Z,1520560128.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:48.677Z,1520560128.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:49.070Z,1520560129.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:49.466Z,1520560129.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:49.871Z,1520560129.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:50.264Z,1520560130.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:50.659Z,1520560130.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:51.062Z,1520560131.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:51.462Z,1520560131.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:51.862Z,1520560131.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:52.274Z,1520560132.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:52.682Z,1520560132.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:53.058Z,1520560133.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:53.464Z,1520560133.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:53.883Z,1520560133.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:54.262Z,1520560134.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:54.673Z,1520560134.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:55.062Z,1520560135.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:55.458Z,1520560135.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:55.862Z,1520560135.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:56.282Z,1520560136.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:56.658Z,1520560136.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:57.062Z,1520560137.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:57.462Z,1520560137.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:57.858Z,1520560137.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:58.264Z,1520560138.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:58.679Z,1520560138.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:59.070Z,1520560139.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:59.470Z,1520560139.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:48:59.870Z,1520560139.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:00.265Z,1520560140.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:00.668Z,1520560140.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:01.072Z,1520560141.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:01.472Z,1520560141.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:01.863Z,1520560141.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:02.268Z,1520560142.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:02.658Z,1520560142.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:03.059Z,1520560143.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:03.466Z,1520560143.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:03.858Z,1520560143.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:04.270Z,1520560144.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:04.665Z,1520560144.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:05.073Z,1520560145.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:05.462Z,1520560145.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:05.862Z,1520560145.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:06.266Z,1520560146.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:06.658Z,1520560146.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:07.074Z,1520560147.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:07.458Z,1520560147.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:07.862Z,1520560147.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:08.271Z,1520560148.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:08.670Z,1520560148.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:09.063Z,1520560149.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:09.466Z,1520560149.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:09.864Z,1520560149.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:10.288Z,1520560150.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:10.669Z,1520560150.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:11.071Z,1520560151.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:11.467Z,1520560151.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:11.866Z,1520560151.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:12.269Z,1520560152.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:12.667Z,1520560152.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:13.071Z,1520560153.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:13.469Z,1520560153.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:13.869Z,1520560153.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:14.278Z,1520560154.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:14.670Z,1520560154.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:15.075Z,1520560155.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:15.480Z,1520560155.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:15.870Z,1520560155.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:16.258Z,1520560156.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:16.665Z,1520560156.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:17.073Z,1520560157.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:17.459Z,1520560157.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:17.846Z,1520560157.846 [NAL9602](INFO): Powering down
2018-03-09T01:49:17.873Z,1520560157.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:18.258Z,1520560158.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:18.658Z,1520560158.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:19.074Z,1520560159.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:19.462Z,1520560159.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:19.862Z,1520560159.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:20.274Z,1520560160.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:20.658Z,1520560160.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:21.058Z,1520560161.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:21.462Z,1520560161.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:21.869Z,1520560161.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:22.270Z,1520560162.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:22.666Z,1520560162.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:23.066Z,1520560163.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:23.466Z,1520560163.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:23.865Z,1520560163.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:24.265Z,1520560164.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:24.666Z,1520560164.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:25.068Z,1520560165.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:25.469Z,1520560165.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:25.869Z,1520560165.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:26.271Z,1520560166.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:26.669Z,1520560166.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:27.065Z,1520560167.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:27.465Z,1520560167.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:27.865Z,1520560167.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:28.269Z,1520560168.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:28.665Z,1520560168.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:29.073Z,1520560169.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:29.468Z,1520560169.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:29.865Z,1520560169.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:30.265Z,1520560170.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:30.667Z,1520560170.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:31.068Z,1520560171.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:31.470Z,1520560171.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:31.873Z,1520560171.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:32.265Z,1520560172.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:32.670Z,1520560172.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:33.058Z,1520560173.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:33.483Z,1520560173.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:33.858Z,1520560173.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:34.260Z,1520560174.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:34.662Z,1520560174.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:35.062Z,1520560175.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:35.458Z,1520560175.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:35.874Z,1520560175.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:36.262Z,1520560176.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:36.659Z,1520560176.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:37.071Z,1520560177.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:37.458Z,1520560177.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:37.859Z,1520560177.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:38.282Z,1520560178.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:38.658Z,1520560178.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:39.071Z,1520560179.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:39.471Z,1520560179.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:39.883Z,1520560179.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:40.271Z,1520560180.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:40.683Z,1520560180.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:41.066Z,1520560181.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:41.456Z,1520560181.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:41.864Z,1520560181.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:42.264Z,1520560182.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:42.664Z,1520560182.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:43.064Z,1520560183.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:43.463Z,1520560183.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:43.863Z,1520560183.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:44.269Z,1520560184.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:48.152Z,1520560188.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:48.259Z,1520560188.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:48.666Z,1520560188.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:49.059Z,1520560189.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:49.463Z,1520560189.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:49.867Z,1520560189.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:50.257Z,1520560190.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:50.659Z,1520560190.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:51.062Z,1520560191.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:51.458Z,1520560191.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:51.854Z,1520560191.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:52.265Z,1520560192.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:52.643Z,1520560192.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:53.053Z,1520560193.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:53.462Z,1520560193.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:53.855Z,1520560193.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:54.257Z,1520560194.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:54.666Z,1520560194.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:55.061Z,1520560195.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:55.462Z,1520560195.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:55.869Z,1520560195.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:56.261Z,1520560196.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:56.657Z,1520560196.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:57.057Z,1520560197.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:57.443Z,1520560197.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:57.861Z,1520560197.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:58.250Z,1520560198.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:58.647Z,1520560198.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:59.046Z,1520560199.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:59.450Z,1520560199.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:49:59.846Z,1520560199.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:00.270Z,1520560200.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:00.650Z,1520560200.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:01.050Z,1520560201.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:01.450Z,1520560201.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:01.850Z,1520560201.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:02.247Z,1520560202.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:02.650Z,1520560202.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:03.050Z,1520560203.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:03.446Z,1520560203.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:03.862Z,1520560203.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:04.250Z,1520560204.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:04.647Z,1520560204.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:05.062Z,1520560205.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:05.450Z,1520560205.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:05.861Z,1520560205.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:06.262Z,1520560206.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:06.650Z,1520560206.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:07.050Z,1520560207.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:07.462Z,1520560207.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:07.870Z,1520560207.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:08.246Z,1520560208.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:08.662Z,1520560208.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:09.071Z,1520560209.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:09.450Z,1520560209.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:09.862Z,1520560209.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:10.270Z,1520560210.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:10.646Z,1520560210.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:11.062Z,1520560211.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:11.450Z,1520560211.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:11.846Z,1520560211.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:12.249Z,1520560212.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:12.650Z,1520560212.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:13.046Z,1520560213.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:13.450Z,1520560213.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:13.850Z,1520560213.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:14.250Z,1520560214.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:14.650Z,1520560214.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:15.070Z,1520560215.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:15.446Z,1520560215.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:15.862Z,1520560215.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:16.270Z,1520560216.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:16.651Z,1520560216.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:17.050Z,1520560217.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:17.450Z,1520560217.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:17.850Z,1520560217.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:18.251Z,1520560218.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:18.651Z,1520560218.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:19.046Z,1520560219.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:19.447Z,1520560219.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:19.851Z,1520560219.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:20.250Z,1520560220.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:20.650Z,1520560220.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:21.051Z,1520560221.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:21.446Z,1520560221.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:21.854Z,1520560221.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:22.250Z,1520560222.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:22.647Z,1520560222.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:23.048Z,1520560223.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:23.450Z,1520560223.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:23.847Z,1520560223.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:24.250Z,1520560224.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:24.650Z,1520560224.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:25.046Z,1520560225.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:25.443Z,1520560225.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:25.859Z,1520560225.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:26.251Z,1520560226.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:26.650Z,1520560226.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:27.069Z,1520560227.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:27.458Z,1520560227.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:27.862Z,1520560227.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:28.273Z,1520560228.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:28.650Z,1520560228.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:29.062Z,1520560229.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:29.471Z,1520560229.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:29.850Z,1520560229.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:30.246Z,1520560230.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:30.650Z,1520560230.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:31.062Z,1520560231.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:31.447Z,1520560231.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:31.850Z,1520560231.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:32.265Z,1520560232.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:32.647Z,1520560232.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:33.055Z,1520560233.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:33.450Z,1520560233.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:33.846Z,1520560233.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:34.270Z,1520560234.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:34.646Z,1520560234.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:35.050Z,1520560235.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:35.450Z,1520560235.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:35.850Z,1520560235.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:36.255Z,1520560236.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:36.655Z,1520560236.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:37.058Z,1520560237.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:37.453Z,1520560237.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:37.859Z,1520560237.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:38.253Z,1520560238.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:38.655Z,1520560238.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:39.059Z,1520560239.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:39.457Z,1520560239.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:39.857Z,1520560239.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:40.254Z,1520560240.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:40.658Z,1520560240.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:41.057Z,1520560241.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:41.456Z,1520560241.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:41.857Z,1520560241.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:42.258Z,1520560242.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:42.653Z,1520560242.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:43.061Z,1520560243.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:43.447Z,1520560243.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:43.862Z,1520560243.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:44.246Z,1520560244.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:44.650Z,1520560244.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:47.837Z,1520560247.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:47.950Z,1520560247.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:48.334Z,1520560248.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:48.739Z,1520560248.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:49.130Z,1520560249.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:49.537Z,1520560249.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:49.934Z,1520560249.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:50.330Z,1520560250.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:50.732Z,1520560250.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:51.129Z,1520560251.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:51.530Z,1520560251.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:51.932Z,1520560251.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:52.335Z,1520560252.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:52.730Z,1520560252.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:53.133Z,1520560253.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:53.539Z,1520560253.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:53.937Z,1520560253.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:54.332Z,1520560254.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:54.743Z,1520560254.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:55.129Z,1520560255.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:55.534Z,1520560255.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:55.933Z,1520560255.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:56.331Z,1520560256.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:56.742Z,1520560256.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:57.134Z,1520560257.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:57.529Z,1520560257.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:57.942Z,1520560257.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:58.336Z,1520560258.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:58.722Z,1520560258.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:59.133Z,1520560259.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:59.538Z,1520560259.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:50:59.922Z,1520560259.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:00.334Z,1520560260.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:00.738Z,1520560260.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:01.126Z,1520560261.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:01.545Z,1520560261.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:01.930Z,1520560261.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:02.326Z,1520560262.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:02.725Z,1520560262.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:03.124Z,1520560263.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:03.526Z,1520560263.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:03.927Z,1520560263.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:04.331Z,1520560264.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:04.732Z,1520560264.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:04.766Z,1520560264.766 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T01:51:04.766Z,1520560264.766 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 22
2018-03-09T01:51:04.766Z,1520560264.766 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T01:51:04.779Z,1520560264.779 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T01:51:05.132Z,1520560265.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:05.188Z,1520560265.188 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T01:51:05.189Z,1520560265.189 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 22
2018-03-09T01:51:05.523Z,1520560265.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:05.554Z,1520560265.554 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T01:51:05.555Z,1520560265.555 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T01:51:05.555Z,1520560265.555 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T01:51:05.929Z,1520560265.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:06.332Z,1520560266.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:06.726Z,1520560266.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:07.129Z,1520560267.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:07.532Z,1520560267.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:07.933Z,1520560267.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:08.333Z,1520560268.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:08.733Z,1520560268.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:09.133Z,1520560269.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:09.533Z,1520560269.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:09.938Z,1520560269.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:10.333Z,1520560270.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:10.733Z,1520560270.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:11.133Z,1520560271.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:11.519Z,1520560271.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:11.931Z,1520560271.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:12.333Z,1520560272.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:12.730Z,1520560272.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:13.130Z,1520560273.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:13.543Z,1520560273.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:13.938Z,1520560273.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:14.334Z,1520560274.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:14.735Z,1520560274.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:15.134Z,1520560275.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:15.522Z,1520560275.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:15.934Z,1520560275.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:16.333Z,1520560276.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:16.722Z,1520560276.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:17.134Z,1520560277.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:17.522Z,1520560277.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:17.922Z,1520560277.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:18.333Z,1520560278.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:18.719Z,1520560278.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:19.133Z,1520560279.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:19.533Z,1520560279.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:19.933Z,1520560279.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:20.333Z,1520560280.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:20.733Z,1520560280.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:21.123Z,1520560281.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:21.540Z,1520560281.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:21.926Z,1520560281.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:22.323Z,1520560282.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:22.742Z,1520560282.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:23.146Z,1520560283.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:23.523Z,1520560283.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:23.926Z,1520560283.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:24.346Z,1520560284.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:24.723Z,1520560284.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:25.126Z,1520560285.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:25.526Z,1520560285.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:25.922Z,1520560285.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:26.326Z,1520560286.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:26.726Z,1520560286.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:27.123Z,1520560287.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:27.538Z,1520560287.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:27.926Z,1520560287.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:28.330Z,1520560288.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:28.726Z,1520560288.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:29.126Z,1520560289.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:29.531Z,1520560289.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:29.931Z,1520560289.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:30.334Z,1520560290.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:30.729Z,1520560290.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:31.131Z,1520560291.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:31.532Z,1520560291.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:31.929Z,1520560291.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:32.332Z,1520560292.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:32.738Z,1520560292.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:33.131Z,1520560293.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:33.532Z,1520560293.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:33.929Z,1520560293.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:34.322Z,1520560294.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:34.738Z,1520560294.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:35.129Z,1520560295.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:35.534Z,1520560295.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:35.938Z,1520560295.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:36.346Z,1520560296.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:36.726Z,1520560296.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:37.126Z,1520560297.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:37.546Z,1520560297.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:37.930Z,1520560297.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:38.326Z,1520560298.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:38.726Z,1520560298.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:39.126Z,1520560299.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:39.526Z,1520560299.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:39.928Z,1520560299.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:40.323Z,1520560300.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:40.724Z,1520560300.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:41.128Z,1520560301.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:41.526Z,1520560301.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:41.932Z,1520560301.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:42.342Z,1520560302.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:42.728Z,1520560302.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:43.126Z,1520560303.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:43.531Z,1520560303.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:43.933Z,1520560303.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:44.333Z,1520560304.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:44.746Z,1520560304.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:47.957Z,1520560307.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:48.078Z,1520560308.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:48.458Z,1520560308.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:48.842Z,1520560308.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:49.258Z,1520560309.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:49.645Z,1520560309.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:50.046Z,1520560310.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:50.439Z,1520560310.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:50.846Z,1520560310.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:51.245Z,1520560311.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:51.646Z,1520560311.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:52.053Z,1520560312.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:52.451Z,1520560312.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:52.854Z,1520560312.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:53.259Z,1520560313.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:53.655Z,1520560313.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:54.039Z,1520560314.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:54.448Z,1520560314.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:54.846Z,1520560314.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:55.239Z,1520560315.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:55.646Z,1520560315.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:56.040Z,1520560316.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:56.446Z,1520560316.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:56.851Z,1520560316.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:57.242Z,1520560317.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:57.642Z,1520560317.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:58.042Z,1520560318.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:58.448Z,1520560318.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:58.849Z,1520560318.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:59.251Z,1520560319.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:51:59.654Z,1520560319.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:00.054Z,1520560320.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:00.442Z,1520560320.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:00.856Z,1520560320.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:01.242Z,1520560321.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:01.659Z,1520560321.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:02.042Z,1520560322.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:02.441Z,1520560322.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:02.858Z,1520560322.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:03.246Z,1520560323.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:03.639Z,1520560323.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:04.049Z,1520560324.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:04.442Z,1520560324.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:04.846Z,1520560324.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:05.242Z,1520560325.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:05.645Z,1520560325.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:06.047Z,1520560326.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:06.452Z,1520560326.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:06.849Z,1520560326.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:07.248Z,1520560327.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:07.658Z,1520560327.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:08.049Z,1520560328.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:08.092Z,1520560328.092 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-09T01:52:08.449Z,1520560328.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:08.853Z,1520560328.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:09.241Z,1520560329.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:09.639Z,1520560329.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:10.042Z,1520560330.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:10.440Z,1520560330.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:10.842Z,1520560330.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:11.243Z,1520560331.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:11.642Z,1520560331.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:12.045Z,1520560332.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:12.454Z,1520560332.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:12.845Z,1520560332.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:13.239Z,1520560333.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:13.651Z,1520560333.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:14.042Z,1520560334.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:14.446Z,1520560334.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:14.847Z,1520560334.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:15.248Z,1520560335.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:15.643Z,1520560335.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:16.051Z,1520560336.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:16.449Z,1520560336.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:16.853Z,1520560336.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:17.254Z,1520560337.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:17.653Z,1520560337.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:18.047Z,1520560338.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:18.451Z,1520560338.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:18.850Z,1520560338.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:19.247Z,1520560339.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:19.645Z,1520560339.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:20.040Z,1520560340.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:20.442Z,1520560340.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:20.858Z,1520560340.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:21.242Z,1520560341.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:21.644Z,1520560341.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:22.046Z,1520560342.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:22.442Z,1520560342.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:22.839Z,1520560342.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:23.245Z,1520560343.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:23.645Z,1520560343.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:24.046Z,1520560344.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:24.446Z,1520560344.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:24.845Z,1520560344.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:25.246Z,1520560345.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:25.651Z,1520560345.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:26.049Z,1520560346.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:26.455Z,1520560346.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:26.854Z,1520560346.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:27.249Z,1520560347.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:27.646Z,1520560347.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:28.044Z,1520560348.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:28.445Z,1520560348.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:28.846Z,1520560348.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:29.242Z,1520560349.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:29.648Z,1520560349.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:30.050Z,1520560350.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:30.455Z,1520560350.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:30.850Z,1520560350.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:31.250Z,1520560351.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:31.655Z,1520560351.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:32.050Z,1520560352.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:32.453Z,1520560352.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:32.854Z,1520560352.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:33.249Z,1520560353.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:33.639Z,1520560353.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:34.041Z,1520560354.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:34.440Z,1520560354.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:34.842Z,1520560354.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:35.241Z,1520560355.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:35.645Z,1520560355.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:36.041Z,1520560356.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:36.445Z,1520560356.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:36.845Z,1520560356.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:37.239Z,1520560357.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:37.651Z,1520560357.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:38.042Z,1520560358.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:38.453Z,1520560358.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:38.857Z,1520560358.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:39.256Z,1520560359.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:39.642Z,1520560359.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:40.043Z,1520560360.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:40.442Z,1520560360.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:40.857Z,1520560360.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:41.258Z,1520560361.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:41.642Z,1520560361.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:42.055Z,1520560362.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:42.444Z,1520560362.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:42.853Z,1520560362.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:43.239Z,1520560363.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:43.645Z,1520560363.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:44.048Z,1520560364.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:44.442Z,1520560364.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:44.846Z,1520560364.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:47.976Z,1520560367.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:48.145Z,1520560368.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:48.473Z,1520560368.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:48.894Z,1520560368.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:49.266Z,1520560369.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:49.685Z,1520560369.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:50.086Z,1520560370.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:50.463Z,1520560370.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:50.901Z,1520560370.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:51.283Z,1520560371.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:51.667Z,1520560371.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:52.087Z,1520560372.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:52.480Z,1520560372.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:52.877Z,1520560372.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:53.282Z,1520560373.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:53.683Z,1520560373.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:54.066Z,1520560374.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:54.475Z,1520560374.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:54.872Z,1520560374.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:55.301Z,1520560375.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:55.673Z,1520560375.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:56.117Z,1520560376.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:56.463Z,1520560376.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:56.875Z,1520560376.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:57.290Z,1520560377.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:57.666Z,1520560377.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:58.078Z,1520560378.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:58.505Z,1520560378.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:58.883Z,1520560378.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:59.296Z,1520560379.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:52:59.683Z,1520560379.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:00.086Z,1520560380.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:00.478Z,1520560380.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:00.881Z,1520560380.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:01.279Z,1520560381.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:01.677Z,1520560381.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:02.080Z,1520560382.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:02.474Z,1520560382.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:02.897Z,1520560382.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:03.279Z,1520560383.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:03.693Z,1520560383.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:04.066Z,1520560384.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:04.483Z,1520560384.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:04.866Z,1520560384.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:05.294Z,1520560385.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:05.689Z,1520560385.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:06.071Z,1520560386.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:06.466Z,1520560386.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:06.900Z,1520560386.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:07.262Z,1520560387.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:07.679Z,1520560387.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:08.073Z,1520560388.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:08.466Z,1520560388.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:08.882Z,1520560388.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:09.274Z,1520560389.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:09.666Z,1520560389.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:10.066Z,1520560390.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:10.505Z,1520560390.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:10.875Z,1520560390.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:11.306Z,1520560391.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:11.667Z,1520560391.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:12.081Z,1520560392.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:12.491Z,1520560392.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:12.891Z,1520560392.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:13.301Z,1520560393.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:13.682Z,1520560393.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:14.062Z,1520560394.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:14.485Z,1520560394.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:14.880Z,1520560394.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:15.274Z,1520560395.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:15.681Z,1520560395.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:16.087Z,1520560396.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:16.482Z,1520560396.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:16.862Z,1520560396.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:17.275Z,1520560397.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:17.663Z,1520560397.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:18.073Z,1520560398.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:18.506Z,1520560398.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:18.895Z,1520560398.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:19.280Z,1520560399.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:19.695Z,1520560399.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:20.103Z,1520560400.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:20.493Z,1520560400.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:20.883Z,1520560400.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:21.292Z,1520560401.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:21.682Z,1520560401.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:22.083Z,1520560402.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:22.482Z,1520560402.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:22.886Z,1520560402.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:23.266Z,1520560403.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:23.662Z,1520560403.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:24.066Z,1520560404.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:24.472Z,1520560404.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:24.901Z,1520560404.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:25.270Z,1520560405.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:25.666Z,1520560405.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:26.085Z,1520560406.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:26.497Z,1520560406.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:26.900Z,1520560406.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:27.267Z,1520560407.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:27.687Z,1520560407.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:28.097Z,1520560408.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:28.463Z,1520560408.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:28.879Z,1520560408.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:29.277Z,1520560409.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:29.665Z,1520560409.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:30.080Z,1520560410.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:30.477Z,1520560410.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:30.875Z,1520560410.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:31.279Z,1520560411.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:31.705Z,1520560411.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:32.072Z,1520560412.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:32.504Z,1520560412.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:32.877Z,1520560412.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:33.275Z,1520560413.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:33.697Z,1520560413.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:34.101Z,1520560414.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:34.485Z,1520560414.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:34.892Z,1520560414.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:35.292Z,1520560415.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:35.683Z,1520560415.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:36.082Z,1520560416.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:36.475Z,1520560416.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:36.883Z,1520560416.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:37.281Z,1520560417.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:37.676Z,1520560417.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:38.066Z,1520560418.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:38.472Z,1520560418.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:38.867Z,1520560418.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:39.263Z,1520560419.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:39.666Z,1520560419.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:40.105Z,1520560420.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:40.466Z,1520560420.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:40.884Z,1520560420.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:41.268Z,1520560421.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:41.702Z,1520560421.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:42.119Z,1520560422.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:42.474Z,1520560422.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:42.888Z,1520560422.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:43.296Z,1520560423.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:43.687Z,1520560423.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:44.066Z,1520560424.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:44.106Z,1520560424.106 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-09T01:53:44.106Z,1520560424.106 [Default:CheckIn:C.Wait] Stopped
2018-03-09T01:53:44.106Z,1520560424.106 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-09T01:53:44.106Z,1520560424.106 [Default:CheckIn:D] Running Loop=1
2018-03-09T01:53:44.490Z,1520560424.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:44.510Z,1520560424.510 [Default:CheckIn:D] Stopped
2018-03-09T01:53:44.511Z,1520560424.511 [Default:CheckIn:E] Running Loop=1
2018-03-09T01:53:44.868Z,1520560424.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:44.946Z,1520560424.946 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1087.995117 min 
2018-03-09T01:53:44.946Z,1520560424.946 [Default:CheckIn:E] Stopped
2018-03-09T01:53:44.946Z,1520560424.946 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-09T01:53:44.946Z,1520560424.946 [Default:CheckIn] Stopped
2018-03-09T01:53:44.946Z,1520560424.946 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-09T01:53:44.947Z,1520560424.947 [Default:CheckIn](INFO): Running loop #110
2018-03-09T01:53:44.947Z,1520560424.947 [Default:CheckIn] Running Loop=110
2018-03-09T01:53:44.947Z,1520560424.947 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-09T01:53:44.947Z,1520560424.947 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-09T01:53:48.203Z,1520560428.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:48.295Z,1520560428.295 [NAL9602](INFO): Powering up
2018-03-09T01:53:48.314Z,1520560428.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:48.689Z,1520560428.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:49.066Z,1520560429.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:49.479Z,1520560429.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:49.866Z,1520560429.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:50.265Z,1520560430.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:50.677Z,1520560430.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:51.085Z,1520560431.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:51.463Z,1520560431.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:51.881Z,1520560431.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:52.286Z,1520560432.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:52.663Z,1520560432.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:53.082Z,1520560433.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:53.486Z,1520560433.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:53.865Z,1520560433.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:54.278Z,1520560434.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:54.666Z,1520560434.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:55.065Z,1520560435.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:55.478Z,1520560435.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:55.866Z,1520560435.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:56.266Z,1520560436.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:56.678Z,1520560436.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:57.066Z,1520560437.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:57.463Z,1520560437.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:57.878Z,1520560437.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:58.285Z,1520560438.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:58.663Z,1520560438.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:59.089Z,1520560439.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:59.454Z,1520560439.454 [NAL9602](INFO): NAL9602 initialized
2018-03-09T01:53:59.477Z,1520560439.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:53:59.866Z,1520560439.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:00.258Z,1520560440.258 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-09T01:54:00.258Z,1520560440.258 [NAL9602] Data Fault, FailCount= 2
2018-03-09T01:54:00.258Z,1520560440.258 [NAL9602](ERROR): Data Fault
2018-03-09T01:54:00.287Z,1520560440.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:00.350Z,1520560440.350 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-09T01:54:00.649Z,1520560440.649 [NAL9602](INFO): Powering down
2018-03-09T01:54:00.667Z,1520560440.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:01.065Z,1520560441.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:01.486Z,1520560441.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:01.516Z,1520560441.516 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-09T01:54:01.516Z,1520560441.516 [NAL9602] No Fault, FailCount= 2
2018-03-09T01:54:01.878Z,1520560441.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:02.265Z,1520560442.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:02.670Z,1520560442.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:03.079Z,1520560443.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:03.471Z,1520560443.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:03.874Z,1520560443.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:04.274Z,1520560444.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:04.670Z,1520560444.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:05.083Z,1520560445.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:05.479Z,1520560445.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:05.875Z,1520560445.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:05.894Z,1520560445.894 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T01:54:05.894Z,1520560445.894 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 23
2018-03-09T01:54:05.894Z,1520560445.894 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T01:54:05.906Z,1520560445.906 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T01:54:06.278Z,1520560446.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:06.309Z,1520560446.309 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T01:54:06.309Z,1520560446.309 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 23
2018-03-09T01:54:06.669Z,1520560446.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:06.702Z,1520560446.702 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T01:54:06.703Z,1520560446.703 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T01:54:06.703Z,1520560446.703 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T01:54:07.083Z,1520560447.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:07.466Z,1520560447.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:07.902Z,1520560447.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:08.265Z,1520560448.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:08.660Z,1520560448.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:09.085Z,1520560449.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:09.475Z,1520560449.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:09.875Z,1520560449.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:10.271Z,1520560450.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:10.673Z,1520560450.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:11.083Z,1520560451.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:11.475Z,1520560451.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:11.866Z,1520560451.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:12.277Z,1520560452.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:12.666Z,1520560452.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:13.070Z,1520560453.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:13.463Z,1520560453.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:13.886Z,1520560453.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:14.262Z,1520560454.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:14.666Z,1520560454.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:15.067Z,1520560455.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:15.466Z,1520560455.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:15.866Z,1520560455.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:16.267Z,1520560456.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:16.671Z,1520560456.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:17.070Z,1520560457.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:17.471Z,1520560457.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:17.866Z,1520560457.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:18.270Z,1520560458.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:18.670Z,1520560458.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:19.076Z,1520560459.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:19.466Z,1520560459.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:19.869Z,1520560459.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:20.278Z,1520560460.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:20.671Z,1520560460.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:21.090Z,1520560461.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:21.473Z,1520560461.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:21.869Z,1520560461.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:22.283Z,1520560462.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:22.673Z,1520560462.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:23.073Z,1520560463.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:23.482Z,1520560463.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:23.862Z,1520560463.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:24.263Z,1520560464.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:24.673Z,1520560464.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:25.062Z,1520560465.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:25.462Z,1520560465.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:25.869Z,1520560465.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:26.262Z,1520560466.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:26.659Z,1520560466.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:27.070Z,1520560467.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:27.462Z,1520560467.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:27.870Z,1520560467.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:28.286Z,1520560468.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:28.662Z,1520560468.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:29.066Z,1520560469.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:29.478Z,1520560469.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:29.866Z,1520560469.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:30.266Z,1520560470.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:30.666Z,1520560470.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:31.054Z,1520560471.054 [NAL9602](INFO): Powering up NAL9602
2018-03-09T01:54:31.072Z,1520560471.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:31.465Z,1520560471.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:31.875Z,1520560471.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:32.274Z,1520560472.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:32.671Z,1520560472.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:33.072Z,1520560473.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:33.469Z,1520560473.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:33.870Z,1520560473.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:34.270Z,1520560474.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:34.677Z,1520560474.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:35.073Z,1520560475.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:35.472Z,1520560475.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:35.873Z,1520560475.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:36.273Z,1520560476.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:36.681Z,1520560476.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:37.073Z,1520560477.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:37.469Z,1520560477.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:37.869Z,1520560477.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:38.277Z,1520560478.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:38.663Z,1520560478.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:39.077Z,1520560479.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:39.461Z,1520560479.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:39.877Z,1520560479.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:40.266Z,1520560480.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:40.661Z,1520560480.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:41.070Z,1520560481.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:41.466Z,1520560481.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:41.877Z,1520560481.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:42.250Z,1520560482.250 [NAL9602](INFO): NAL9602 initialized
2018-03-09T01:54:42.266Z,1520560482.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:42.666Z,1520560482.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:43.085Z,1520560483.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:43.485Z,1520560483.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:43.889Z,1520560483.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:44.274Z,1520560484.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:44.674Z,1520560484.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:45.074Z,1520560485.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:48.504Z,1520560488.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:48.638Z,1520560488.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:49.040Z,1520560489.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:49.441Z,1520560489.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:49.844Z,1520560489.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:50.229Z,1520560490.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:50.624Z,1520560490.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:51.031Z,1520560491.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:51.427Z,1520560491.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:51.857Z,1520560491.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:52.231Z,1520560492.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:52.628Z,1520560492.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:53.034Z,1520560493.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:53.429Z,1520560493.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:53.841Z,1520560493.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:54.241Z,1520560494.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:54.635Z,1520560494.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:55.034Z,1520560495.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:55.430Z,1520560495.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:55.833Z,1520560495.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:56.235Z,1520560496.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:56.634Z,1520560496.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:57.029Z,1520560497.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:57.429Z,1520560497.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:57.832Z,1520560497.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:58.232Z,1520560498.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:58.640Z,1520560498.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:59.029Z,1520560499.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:59.429Z,1520560499.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:54:59.828Z,1520560499.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:00.238Z,1520560500.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:00.641Z,1520560500.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:01.032Z,1520560501.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:01.421Z,1520560501.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:01.838Z,1520560501.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:02.246Z,1520560502.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:02.646Z,1520560502.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:03.033Z,1520560503.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:03.437Z,1520560503.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:03.829Z,1520560503.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:04.233Z,1520560504.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:04.646Z,1520560504.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:05.022Z,1520560505.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:05.442Z,1520560505.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:05.846Z,1520560505.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:06.229Z,1520560506.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:06.641Z,1520560506.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:07.045Z,1520560507.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:07.439Z,1520560507.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:07.835Z,1520560507.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:08.229Z,1520560508.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:08.630Z,1520560508.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:09.026Z,1520560509.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:09.438Z,1520560509.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:09.822Z,1520560509.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:10.233Z,1520560510.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:10.653Z,1520560510.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:11.050Z,1520560511.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:11.433Z,1520560511.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:11.860Z,1520560511.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:12.245Z,1520560512.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:12.631Z,1520560512.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:13.034Z,1520560513.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:13.427Z,1520560513.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:13.829Z,1520560513.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:14.235Z,1520560514.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:14.628Z,1520560514.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:15.033Z,1520560515.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:15.432Z,1520560515.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:15.841Z,1520560515.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:16.243Z,1520560516.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:16.645Z,1520560516.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:17.047Z,1520560517.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:17.422Z,1520560517.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:17.826Z,1520560517.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:18.221Z,1520560518.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:18.626Z,1520560518.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:19.026Z,1520560519.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:19.425Z,1520560519.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:19.827Z,1520560519.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:20.239Z,1520560520.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:20.627Z,1520560520.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:21.051Z,1520560521.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:21.444Z,1520560521.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:21.831Z,1520560521.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:22.226Z,1520560522.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:22.630Z,1520560522.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:23.026Z,1520560523.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:23.434Z,1520560523.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:23.854Z,1520560523.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:24.241Z,1520560524.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:24.629Z,1520560524.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:25.035Z,1520560525.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:25.429Z,1520560525.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:25.833Z,1520560525.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:26.239Z,1520560526.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:26.638Z,1520560526.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:27.034Z,1520560527.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:27.435Z,1520560527.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:27.825Z,1520560527.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:28.222Z,1520560528.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:28.636Z,1520560528.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:29.038Z,1520560529.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:29.422Z,1520560529.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:29.835Z,1520560529.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:30.238Z,1520560530.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:30.635Z,1520560530.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:31.041Z,1520560531.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:31.433Z,1520560531.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:31.833Z,1520560531.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:32.246Z,1520560532.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:32.639Z,1520560532.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:33.040Z,1520560533.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:33.443Z,1520560533.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:33.822Z,1520560533.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:34.222Z,1520560534.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:34.626Z,1520560534.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:35.021Z,1520560535.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:35.427Z,1520560535.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:35.826Z,1520560535.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:36.237Z,1520560536.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:36.626Z,1520560536.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:37.043Z,1520560537.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:37.446Z,1520560537.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:37.826Z,1520560537.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:38.243Z,1520560538.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:38.625Z,1520560538.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:39.026Z,1520560539.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:39.426Z,1520560539.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:39.826Z,1520560539.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:40.222Z,1520560540.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:40.646Z,1520560540.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:41.026Z,1520560541.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:41.422Z,1520560541.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:41.827Z,1520560541.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:42.226Z,1520560542.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:42.628Z,1520560542.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:43.029Z,1520560543.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:43.453Z,1520560543.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:43.826Z,1520560543.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:44.234Z,1520560544.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:44.647Z,1520560544.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:45.051Z,1520560545.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:45.443Z,1520560545.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:48.830Z,1520560548.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:48.954Z,1520560548.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:49.322Z,1520560549.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:49.720Z,1520560549.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:50.165Z,1520560550.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:50.521Z,1520560550.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:50.939Z,1520560550.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:51.332Z,1520560551.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:51.725Z,1520560551.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:52.130Z,1520560552.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:52.537Z,1520560552.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:52.926Z,1520560552.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:53.330Z,1520560553.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:53.710Z,1520560553.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:54.129Z,1520560554.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:54.525Z,1520560554.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:54.929Z,1520560554.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:55.330Z,1520560555.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:55.707Z,1520560555.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:56.110Z,1520560556.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:56.514Z,1520560556.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:56.935Z,1520560556.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:57.310Z,1520560557.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:57.732Z,1520560557.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:58.130Z,1520560558.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:58.518Z,1520560558.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:58.945Z,1520560558.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:59.351Z,1520560559.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:55:59.725Z,1520560559.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:00.137Z,1520560560.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:00.520Z,1520560560.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:00.917Z,1520560560.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:01.318Z,1520560561.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:01.716Z,1520560561.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:02.118Z,1520560562.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:02.519Z,1520560562.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:02.922Z,1520560562.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:03.321Z,1520560563.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:03.730Z,1520560563.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:04.133Z,1520560564.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:04.556Z,1520560564.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:04.937Z,1520560564.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:05.337Z,1520560565.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:05.727Z,1520560565.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:06.141Z,1520560566.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:06.514Z,1520560566.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:06.916Z,1520560566.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:07.324Z,1520560567.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:07.710Z,1520560567.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:08.110Z,1520560568.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:08.510Z,1520560568.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:08.953Z,1520560568.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:09.329Z,1520560569.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:09.710Z,1520560569.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:10.113Z,1520560570.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:10.518Z,1520560570.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:10.939Z,1520560570.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:11.319Z,1520560571.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:11.745Z,1520560571.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:12.141Z,1520560572.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:12.531Z,1520560572.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:12.941Z,1520560572.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:13.318Z,1520560573.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:13.710Z,1520560573.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:14.112Z,1520560574.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:14.523Z,1520560574.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:14.915Z,1520560574.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:15.318Z,1520560575.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:15.718Z,1520560575.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:16.114Z,1520560576.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:16.517Z,1520560576.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:16.921Z,1520560576.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:17.333Z,1520560577.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:17.717Z,1520560577.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:18.131Z,1520560578.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:18.519Z,1520560578.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:18.944Z,1520560578.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:19.327Z,1520560579.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:19.722Z,1520560579.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:20.125Z,1520560580.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:20.530Z,1520560580.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:20.927Z,1520560580.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:21.306Z,1520560581.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:21.721Z,1520560581.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:22.125Z,1520560582.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:22.506Z,1520560582.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:22.910Z,1520560582.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:23.309Z,1520560583.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:23.714Z,1520560583.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:24.111Z,1520560584.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:24.508Z,1520560584.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:24.906Z,1520560584.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:25.313Z,1520560585.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:25.712Z,1520560585.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:26.132Z,1520560586.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:26.517Z,1520560586.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:26.938Z,1520560586.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:27.319Z,1520560587.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:27.720Z,1520560587.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:28.124Z,1520560588.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:28.527Z,1520560588.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:28.934Z,1520560588.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:29.345Z,1520560589.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:29.722Z,1520560589.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:30.125Z,1520560590.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:30.508Z,1520560590.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:30.910Z,1520560590.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:31.324Z,1520560591.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:31.708Z,1520560591.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:32.110Z,1520560592.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:32.510Z,1520560592.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:32.921Z,1520560592.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:33.327Z,1520560593.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:33.729Z,1520560593.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:34.135Z,1520560594.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:34.514Z,1520560594.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:34.933Z,1520560594.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:35.329Z,1520560595.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:35.710Z,1520560595.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:36.115Z,1520560596.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:36.529Z,1520560596.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:36.937Z,1520560596.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:37.336Z,1520560597.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:37.737Z,1520560597.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:38.129Z,1520560598.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:38.529Z,1520560598.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:38.910Z,1520560598.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:39.310Z,1520560599.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:39.710Z,1520560599.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:40.105Z,1520560600.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:40.510Z,1520560600.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:40.910Z,1520560600.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:41.336Z,1520560601.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:41.715Z,1520560601.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:42.138Z,1520560602.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:42.528Z,1520560602.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:42.921Z,1520560602.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:43.335Z,1520560603.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:43.712Z,1520560603.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:44.122Z,1520560604.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:44.527Z,1520560604.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:44.908Z,1520560604.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:45.317Z,1520560605.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:45.728Z,1520560605.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:48.853Z,1520560608.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:48.997Z,1520560608.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:49.357Z,1520560609.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:49.757Z,1520560609.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:50.143Z,1520560610.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:50.541Z,1520560610.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:50.941Z,1520560610.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:51.354Z,1520560611.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:51.741Z,1520560611.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:52.146Z,1520560612.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:52.537Z,1520560612.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:52.947Z,1520560612.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:53.334Z,1520560613.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:53.751Z,1520560613.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:54.161Z,1520560614.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:54.551Z,1520560614.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:54.953Z,1520560614.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:55.334Z,1520560615.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:55.730Z,1520560615.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:56.136Z,1520560616.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:56.534Z,1520560616.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:56.969Z,1520560616.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:57.346Z,1520560617.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:57.740Z,1520560617.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:58.137Z,1520560618.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:58.545Z,1520560618.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:58.952Z,1520560618.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:59.349Z,1520560619.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:56:59.749Z,1520560619.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:00.153Z,1520560620.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:00.547Z,1520560620.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:00.943Z,1520560620.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:01.343Z,1520560621.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:01.736Z,1520560621.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:02.145Z,1520560622.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:02.543Z,1520560622.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:02.937Z,1520560622.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:03.346Z,1520560623.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:03.743Z,1520560623.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:04.153Z,1520560624.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:04.553Z,1520560624.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:04.966Z,1520560624.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:05.341Z,1520560625.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:05.735Z,1520560625.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:06.146Z,1520560626.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:06.535Z,1520560626.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:06.934Z,1520560626.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:06.969Z,1520560626.969 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T01:57:06.969Z,1520560626.969 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 24
2018-03-09T01:57:06.969Z,1520560626.969 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T01:57:06.994Z,1520560626.994 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T01:57:07.343Z,1520560627.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:07.409Z,1520560627.409 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T01:57:07.409Z,1520560627.409 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 24
2018-03-09T01:57:07.739Z,1520560627.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:07.757Z,1520560627.757 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T01:57:07.758Z,1520560627.758 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T01:57:07.758Z,1520560627.758 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T01:57:08.137Z,1520560628.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:08.540Z,1520560628.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:08.929Z,1520560628.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:09.356Z,1520560629.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:09.753Z,1520560629.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:10.148Z,1520560630.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:10.549Z,1520560630.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:10.933Z,1520560630.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:11.334Z,1520560631.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:11.734Z,1520560631.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:12.134Z,1520560632.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:12.529Z,1520560632.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:12.934Z,1520560632.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:13.345Z,1520560633.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:13.739Z,1520560633.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:14.139Z,1520560634.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:14.554Z,1520560634.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:14.953Z,1520560634.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:15.335Z,1520560635.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:15.739Z,1520560635.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:16.136Z,1520560636.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:16.537Z,1520560636.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:16.949Z,1520560636.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:17.349Z,1520560637.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:17.742Z,1520560637.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:18.137Z,1520560638.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:18.529Z,1520560638.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:18.934Z,1520560638.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:19.338Z,1520560639.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:19.729Z,1520560639.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:20.150Z,1520560640.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:20.181Z,1520560640.181 [CBIT](INFO): Clearing failed state for component DropWeight
2018-03-09T01:57:20.181Z,1520560640.181 [DropWeight] No Fault, FailCount= 1
2018-03-09T01:57:20.556Z,1520560640.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:20.934Z,1520560640.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:21.338Z,1520560641.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:21.734Z,1520560641.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:22.139Z,1520560642.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:22.534Z,1520560642.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:22.942Z,1520560642.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:23.350Z,1520560643.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:23.739Z,1520560643.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:24.139Z,1520560644.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:24.540Z,1520560644.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:24.943Z,1520560644.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:25.365Z,1520560645.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:25.743Z,1520560645.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:26.138Z,1520560646.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:26.550Z,1520560646.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:26.937Z,1520560646.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:27.338Z,1520560647.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:27.743Z,1520560647.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:28.133Z,1520560648.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:28.546Z,1520560648.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:28.939Z,1520560648.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:29.346Z,1520560649.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:29.757Z,1520560649.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:30.157Z,1520560650.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:30.534Z,1520560650.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:30.939Z,1520560650.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:31.334Z,1520560651.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:31.735Z,1520560651.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:32.138Z,1520560652.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:32.546Z,1520560652.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:32.940Z,1520560652.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:33.341Z,1520560653.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:33.746Z,1520560653.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:34.157Z,1520560654.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:34.549Z,1520560654.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:34.944Z,1520560654.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:35.335Z,1520560655.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:35.748Z,1520560655.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:36.148Z,1520560656.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:36.533Z,1520560656.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:36.934Z,1520560656.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:37.349Z,1520560657.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:37.739Z,1520560657.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:38.143Z,1520560658.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:38.558Z,1520560658.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:38.958Z,1520560658.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:39.354Z,1520560659.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:39.754Z,1520560659.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:40.135Z,1520560660.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:40.539Z,1520560660.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:40.935Z,1520560660.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:41.332Z,1520560661.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:41.730Z,1520560661.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:42.162Z,1520560662.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:42.537Z,1520560662.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:42.936Z,1520560662.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:43.019Z,1520560663.019 [CBIT](IMPORTANT): Beginning ground fault scan
2018-03-09T01:57:43.359Z,1520560663.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:43.746Z,1520560663.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:44.148Z,1520560664.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:44.574Z,1520560664.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:44.944Z,1520560664.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:45.343Z,1520560665.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:45.757Z,1520560665.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:48.989Z,1520560668.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:49.159Z,1520560669.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:49.569Z,1520560669.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:49.966Z,1520560669.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:50.346Z,1520560670.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:50.748Z,1520560670.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:51.146Z,1520560671.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:51.542Z,1520560671.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:51.965Z,1520560671.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:52.350Z,1520560672.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:52.742Z,1520560672.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:53.168Z,1520560673.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:53.550Z,1520560673.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:53.958Z,1520560673.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:54.365Z,1520560674.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:54.760Z,1520560674.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:55.165Z,1520560675.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:55.554Z,1520560675.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:55.948Z,1520560675.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:56.066Z,1520560676.066 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.125629
CHAN A1 (24V): -0.011667
CHAN A2 (12V): 0.000224
CHAN A3 (5V): -0.001288
CHAN B0 (3.3V): 0.000007
CHAN B1 (3.15aV): -0.000001
CHAN B2 (3.15bV): -0.000322
CHAN B3 (GND): -0.000232
OPEN: 0.005635
Full Scale Calc: 4.765 mA, -1.589 mA
2018-03-09T01:57:56.356Z,1520560676.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:56.761Z,1520560676.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:57.155Z,1520560677.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:57.556Z,1520560677.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:57.967Z,1520560677.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:58.359Z,1520560678.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:58.743Z,1520560678.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:59.170Z,1520560679.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:59.563Z,1520560679.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:57:59.959Z,1520560679.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:00.378Z,1520560680.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:00.743Z,1520560680.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:01.147Z,1520560681.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:01.547Z,1520560681.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:01.946Z,1520560681.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:02.344Z,1520560682.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:02.746Z,1520560682.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:03.151Z,1520560683.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:03.552Z,1520560683.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:03.950Z,1520560683.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:04.365Z,1520560684.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:04.773Z,1520560684.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:05.173Z,1520560685.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:05.570Z,1520560685.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:05.942Z,1520560685.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:06.346Z,1520560686.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:06.746Z,1520560686.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:07.146Z,1520560687.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:07.550Z,1520560687.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:07.950Z,1520560687.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:08.346Z,1520560688.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:08.767Z,1520560688.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:09.142Z,1520560689.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:09.553Z,1520560689.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:09.970Z,1520560689.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:10.371Z,1520560690.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:10.757Z,1520560690.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:11.146Z,1520560691.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:11.546Z,1520560691.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:11.946Z,1520560691.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:12.346Z,1520560692.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:12.758Z,1520560692.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:13.153Z,1520560693.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:13.562Z,1520560693.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:13.954Z,1520560693.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:14.354Z,1520560694.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:14.777Z,1520560694.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:15.164Z,1520560695.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:15.565Z,1520560695.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:15.963Z,1520560695.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:16.346Z,1520560696.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:16.746Z,1520560696.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:17.147Z,1520560697.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:17.554Z,1520560697.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:17.946Z,1520560697.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:18.362Z,1520560698.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:18.754Z,1520560698.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:19.155Z,1520560699.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:19.554Z,1520560699.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:19.961Z,1520560699.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:20.363Z,1520560700.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:20.773Z,1520560700.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:21.165Z,1520560701.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:21.546Z,1520560701.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:21.947Z,1520560701.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:22.358Z,1520560702.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:22.742Z,1520560702.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:23.146Z,1520560703.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:23.550Z,1520560703.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:23.942Z,1520560703.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:24.350Z,1520560704.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:24.750Z,1520560704.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:25.157Z,1520560705.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:25.566Z,1520560705.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:25.982Z,1520560705.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:26.357Z,1520560706.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:26.754Z,1520560706.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:27.146Z,1520560707.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:27.546Z,1520560707.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:27.950Z,1520560707.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:28.350Z,1520560708.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:28.747Z,1520560708.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:29.146Z,1520560709.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:29.554Z,1520560709.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:29.954Z,1520560709.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:30.365Z,1520560710.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:30.762Z,1520560710.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:31.165Z,1520560711.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:31.569Z,1520560711.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:31.957Z,1520560711.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:32.355Z,1520560712.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:32.766Z,1520560712.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:33.154Z,1520560713.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:33.556Z,1520560713.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:33.965Z,1520560713.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:34.355Z,1520560714.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:34.763Z,1520560714.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:35.167Z,1520560715.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:35.567Z,1520560715.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:35.969Z,1520560715.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:36.371Z,1520560716.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:36.754Z,1520560716.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:37.150Z,1520560717.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:37.546Z,1520560717.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:37.946Z,1520560717.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:38.354Z,1520560718.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:38.755Z,1520560718.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:39.156Z,1520560719.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:39.554Z,1520560719.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:39.956Z,1520560719.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:40.359Z,1520560720.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:40.765Z,1520560720.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:41.169Z,1520560721.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:41.544Z,1520560721.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:41.966Z,1520560721.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:42.365Z,1520560722.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:42.742Z,1520560722.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:43.150Z,1520560723.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:43.550Z,1520560723.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:43.950Z,1520560723.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:44.346Z,1520560724.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:44.754Z,1520560724.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:45.151Z,1520560725.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:45.193Z,1520560725.193 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-09T01:53:44.9Z
2018-03-09T01:58:45.193Z,1520560725.193 [Default:CheckIn:Read_GPS] Stopped
2018-03-09T01:58:45.193Z,1520560725.193 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-09T01:58:45.562Z,1520560725.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:46.057Z,1520560726.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:49.206Z,1520560729.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:49.320Z,1520560729.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:49.713Z,1520560729.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:50.114Z,1520560730.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:50.525Z,1520560730.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:50.921Z,1520560730.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:51.300Z,1520560731.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:54.641Z,1520560734.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:54.765Z,1520560734.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:55.109Z,1520560735.109 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0440.lzma
2018-03-09T01:58:55.147Z,1520560735.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:55.542Z,1520560735.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:55.908Z,1520560735.908 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0440.lzma.bak
2018-03-09T01:58:55.908Z,1520560735.908 [DataOverHttps](INFO): SBD MOMSN=7991244
2018-03-09T01:58:55.949Z,1520560735.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:56.536Z,1520560736.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:56.724Z,1520560736.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:58:57.139Z,1520560737.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:00.415Z,1520560740.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:00.555Z,1520560740.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:00.929Z,1520560740.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:01.326Z,1520560741.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:01.703Z,1520560741.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:02.112Z,1520560742.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:02.526Z,1520560742.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:05.653Z,1520560745.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:05.792Z,1520560745.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:06.138Z,1520560746.138 [DataOverHttps](INFO): Sending 400 bytes from file Logs/20180308T074127/Express0441.lzma
2018-03-09T01:59:06.163Z,1520560746.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:06.558Z,1520560746.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:06.932Z,1520560746.932 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0441.lzma.bak
2018-03-09T01:59:06.933Z,1520560746.933 [DataOverHttps](INFO): SBD MOMSN=7991246
2018-03-09T01:59:06.992Z,1520560746.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:07.550Z,1520560747.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:07.569Z,1520560747.569 [Default:CheckIn:Read_Iridium] Stopped
2018-03-09T01:59:07.569Z,1520560747.569 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-09T01:59:07.569Z,1520560747.569 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-09T01:59:07.756Z,1520560747.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:10.962Z,1520560750.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:11.072Z,1520560751.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:11.470Z,1520560751.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:11.876Z,1520560751.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:12.273Z,1520560752.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:12.675Z,1520560752.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:13.071Z,1520560753.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:13.474Z,1520560753.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:13.870Z,1520560753.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:14.262Z,1520560754.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:14.663Z,1520560754.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:15.062Z,1520560755.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:15.447Z,1520560755.447 [NAL9602](INFO): SBD MO Status=0, MOMSN=4911, MT Status=0, MTMSN=0
2018-03-09T01:59:15.447Z,1520560755.447 [NAL9602](INFO): No messages in MT queue
2018-03-09T01:59:15.464Z,1520560755.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:15.873Z,1520560755.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:16.282Z,1520560756.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:16.662Z,1520560756.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:17.062Z,1520560757.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:17.478Z,1520560757.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:17.859Z,1520560757.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:18.274Z,1520560758.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:18.662Z,1520560758.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:19.074Z,1520560759.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:19.463Z,1520560759.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:19.862Z,1520560759.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:20.266Z,1520560760.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:20.662Z,1520560760.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:21.082Z,1520560761.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:21.459Z,1520560761.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:21.874Z,1520560761.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:22.262Z,1520560762.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:22.658Z,1520560762.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:23.062Z,1520560763.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:23.469Z,1520560763.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:23.859Z,1520560763.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:24.271Z,1520560764.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:24.670Z,1520560764.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:25.063Z,1520560765.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:25.471Z,1520560765.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:25.871Z,1520560765.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:26.271Z,1520560766.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:26.662Z,1520560766.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:27.062Z,1520560767.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:27.462Z,1520560767.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:27.862Z,1520560767.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:28.262Z,1520560768.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:28.661Z,1520560768.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:29.070Z,1520560769.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:29.462Z,1520560769.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:29.859Z,1520560769.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:30.270Z,1520560770.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:30.669Z,1520560770.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:31.069Z,1520560771.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:31.467Z,1520560771.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:31.868Z,1520560771.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:32.273Z,1520560772.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:32.674Z,1520560772.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:33.068Z,1520560773.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:33.470Z,1520560773.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:33.878Z,1520560773.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:34.278Z,1520560774.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:34.670Z,1520560774.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:35.070Z,1520560775.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:35.469Z,1520560775.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:35.869Z,1520560775.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:36.265Z,1520560776.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:36.669Z,1520560776.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:37.063Z,1520560777.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:37.460Z,1520560777.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:37.863Z,1520560777.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:38.263Z,1520560778.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:38.658Z,1520560778.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:39.068Z,1520560779.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:39.472Z,1520560779.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:39.867Z,1520560779.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:40.270Z,1520560780.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:40.671Z,1520560780.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:41.071Z,1520560781.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:41.470Z,1520560781.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:41.874Z,1520560781.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:42.273Z,1520560782.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:42.663Z,1520560782.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:43.092Z,1520560783.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:43.490Z,1520560783.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:43.896Z,1520560783.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:44.284Z,1520560784.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:44.671Z,1520560784.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:45.096Z,1520560785.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:45.472Z,1520560785.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:45.862Z,1520560785.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:46.258Z,1520560786.258 [NAL9602](INFO): Powering down
2018-03-09T01:59:46.311Z,1520560786.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:46.662Z,1520560786.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:47.064Z,1520560787.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:47.493Z,1520560787.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:47.863Z,1520560787.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:48.262Z,1520560788.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:48.662Z,1520560788.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:49.070Z,1520560789.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:49.465Z,1520560789.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:49.887Z,1520560789.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:50.262Z,1520560790.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:50.659Z,1520560790.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:51.081Z,1520560791.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:51.462Z,1520560791.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:51.863Z,1520560791.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:52.264Z,1520560792.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:52.663Z,1520560792.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:53.058Z,1520560793.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:53.462Z,1520560793.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:53.862Z,1520560793.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:54.260Z,1520560794.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:54.662Z,1520560794.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:55.067Z,1520560795.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:55.457Z,1520560795.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:55.867Z,1520560795.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:56.266Z,1520560796.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:56.667Z,1520560796.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:57.070Z,1520560797.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:57.469Z,1520560797.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:57.867Z,1520560797.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:58.268Z,1520560798.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:58.673Z,1520560798.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:59.073Z,1520560799.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:59.468Z,1520560799.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T01:59:59.870Z,1520560799.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:00.270Z,1520560800.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:00.679Z,1520560800.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:01.075Z,1520560801.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:01.470Z,1520560801.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:01.870Z,1520560801.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:02.270Z,1520560802.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:02.670Z,1520560802.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:03.067Z,1520560803.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:03.466Z,1520560803.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:03.869Z,1520560803.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:04.265Z,1520560804.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:04.674Z,1520560804.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:05.074Z,1520560805.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:05.465Z,1520560805.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:05.875Z,1520560805.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:06.274Z,1520560806.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:06.662Z,1520560806.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:07.062Z,1520560807.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:07.462Z,1520560807.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:07.862Z,1520560807.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:07.904Z,1520560807.904 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T02:00:07.904Z,1520560807.904 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 25
2018-03-09T02:00:07.904Z,1520560807.904 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T02:00:07.933Z,1520560807.933 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T02:00:08.261Z,1520560808.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:08.305Z,1520560808.305 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T02:00:08.305Z,1520560808.305 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 25
2018-03-09T02:00:11.563Z,1520560811.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:11.589Z,1520560811.589 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T02:00:11.589Z,1520560811.589 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T02:00:11.590Z,1520560811.590 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T02:00:11.700Z,1520560811.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:12.051Z,1520560812.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:12.444Z,1520560812.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:12.853Z,1520560812.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:13.250Z,1520560813.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:13.647Z,1520560813.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:14.050Z,1520560814.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:14.447Z,1520560814.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:14.835Z,1520560814.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:15.241Z,1520560815.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:15.643Z,1520560815.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:16.046Z,1520560816.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:16.451Z,1520560816.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:16.853Z,1520560816.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:17.235Z,1520560817.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:17.654Z,1520560817.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:18.046Z,1520560818.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:18.433Z,1520560818.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:18.844Z,1520560818.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:19.242Z,1520560819.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:19.635Z,1520560819.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:20.041Z,1520560820.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:20.442Z,1520560820.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:20.840Z,1520560820.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:21.246Z,1520560821.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:21.649Z,1520560821.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:22.045Z,1520560822.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:22.445Z,1520560822.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:22.838Z,1520560822.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:23.237Z,1520560823.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:23.653Z,1520560823.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:24.056Z,1520560824.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:24.438Z,1520560824.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:24.845Z,1520560824.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:25.241Z,1520560825.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:25.637Z,1520560825.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:26.039Z,1520560826.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:26.445Z,1520560826.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:26.843Z,1520560826.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:27.247Z,1520560827.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:27.650Z,1520560827.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:28.049Z,1520560828.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:28.449Z,1520560828.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:28.858Z,1520560828.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:29.246Z,1520560829.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:29.663Z,1520560829.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:30.056Z,1520560830.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:30.450Z,1520560830.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:30.837Z,1520560830.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:31.244Z,1520560831.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:31.641Z,1520560831.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:32.038Z,1520560832.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:32.439Z,1520560832.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:32.846Z,1520560832.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:33.245Z,1520560833.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:33.647Z,1520560833.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:34.047Z,1520560834.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:34.453Z,1520560834.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:34.851Z,1520560834.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:35.251Z,1520560835.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:35.638Z,1520560835.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:36.059Z,1520560836.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:36.446Z,1520560836.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:36.847Z,1520560836.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:37.259Z,1520560837.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:37.650Z,1520560837.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:38.042Z,1520560838.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:38.441Z,1520560838.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:38.842Z,1520560838.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:39.236Z,1520560839.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:39.640Z,1520560839.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:40.046Z,1520560840.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:40.444Z,1520560840.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:40.850Z,1520560840.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:41.244Z,1520560841.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:41.642Z,1520560841.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:42.054Z,1520560842.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:42.441Z,1520560842.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:42.845Z,1520560842.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:43.254Z,1520560843.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:43.650Z,1520560843.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:44.054Z,1520560844.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:44.447Z,1520560844.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:44.838Z,1520560844.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:45.236Z,1520560845.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:45.640Z,1520560845.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:46.044Z,1520560846.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:46.442Z,1520560846.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:46.846Z,1520560846.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:47.246Z,1520560847.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:47.644Z,1520560847.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:48.055Z,1520560848.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:48.446Z,1520560848.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:48.832Z,1520560848.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:49.252Z,1520560849.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:49.646Z,1520560849.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:50.046Z,1520560850.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:50.449Z,1520560850.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:50.836Z,1520560850.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:51.246Z,1520560851.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:51.658Z,1520560851.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:52.042Z,1520560852.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:52.436Z,1520560852.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:52.853Z,1520560852.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:53.243Z,1520560853.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:53.645Z,1520560853.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:54.047Z,1520560854.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:54.442Z,1520560854.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:54.844Z,1520560854.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:55.243Z,1520560855.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:55.636Z,1520560855.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:56.042Z,1520560856.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:56.453Z,1520560856.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:56.836Z,1520560856.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:57.234Z,1520560857.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:57.646Z,1520560857.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:58.038Z,1520560858.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:58.445Z,1520560858.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:58.841Z,1520560858.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:59.242Z,1520560859.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:00:59.643Z,1520560859.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:00.046Z,1520560860.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:00.449Z,1520560860.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:00.837Z,1520560860.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:01.253Z,1520560861.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:01.641Z,1520560861.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:02.044Z,1520560862.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:02.446Z,1520560862.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:02.842Z,1520560862.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:03.238Z,1520560863.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:03.645Z,1520560863.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:04.042Z,1520560864.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:04.445Z,1520560864.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:04.846Z,1520560864.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:05.249Z,1520560865.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:05.646Z,1520560865.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:06.050Z,1520560866.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:06.451Z,1520560866.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:06.837Z,1520560866.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:07.241Z,1520560867.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:07.638Z,1520560867.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:08.041Z,1520560868.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:08.457Z,1520560868.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:11.643Z,1520560871.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:11.772Z,1520560871.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:12.138Z,1520560872.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:12.525Z,1520560872.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:12.924Z,1520560872.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:13.334Z,1520560873.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:13.739Z,1520560873.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:14.127Z,1520560874.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:14.535Z,1520560874.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:14.928Z,1520560874.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:15.332Z,1520560875.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:15.735Z,1520560875.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:16.136Z,1520560876.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:16.532Z,1520560876.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:16.932Z,1520560876.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:17.335Z,1520560877.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:17.732Z,1520560877.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:18.132Z,1520560878.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:18.539Z,1520560878.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:18.931Z,1520560878.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:19.329Z,1520560879.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:19.739Z,1520560879.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:20.136Z,1520560880.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:20.544Z,1520560880.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:20.939Z,1520560880.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:21.325Z,1520560881.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:21.727Z,1520560881.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:22.130Z,1520560882.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:22.524Z,1520560882.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:22.926Z,1520560882.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:23.329Z,1520560883.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:23.728Z,1520560883.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:24.138Z,1520560884.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:24.535Z,1520560884.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:24.929Z,1520560884.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:25.338Z,1520560885.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:25.730Z,1520560885.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:26.138Z,1520560886.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:26.534Z,1520560886.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:26.934Z,1520560886.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:27.332Z,1520560887.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:27.737Z,1520560887.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:28.130Z,1520560888.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:28.543Z,1520560888.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:28.926Z,1520560888.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:29.338Z,1520560889.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:29.723Z,1520560889.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:30.126Z,1520560890.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:30.528Z,1520560890.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:30.926Z,1520560890.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:31.322Z,1520560891.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:31.730Z,1520560891.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:32.130Z,1520560892.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:32.526Z,1520560892.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:32.930Z,1520560892.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:33.323Z,1520560893.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:33.731Z,1520560893.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:34.134Z,1520560894.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:34.527Z,1520560894.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:34.942Z,1520560894.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:35.334Z,1520560895.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:35.742Z,1520560895.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:36.134Z,1520560896.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:36.534Z,1520560896.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:36.920Z,1520560896.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:37.334Z,1520560897.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:37.738Z,1520560897.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:38.121Z,1520560898.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:38.535Z,1520560898.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:38.934Z,1520560898.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:39.319Z,1520560899.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:39.738Z,1520560899.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:40.126Z,1520560900.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:40.520Z,1520560900.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:40.930Z,1520560900.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:41.342Z,1520560901.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:41.728Z,1520560901.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:42.135Z,1520560902.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:42.540Z,1520560902.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:42.952Z,1520560902.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:43.327Z,1520560903.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:43.726Z,1520560903.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:44.138Z,1520560904.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:44.526Z,1520560904.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:44.948Z,1520560904.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:45.326Z,1520560905.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:45.728Z,1520560905.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:46.138Z,1520560906.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:46.527Z,1520560906.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:46.938Z,1520560906.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:47.336Z,1520560907.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:47.731Z,1520560907.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:48.133Z,1520560908.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:48.534Z,1520560908.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:48.927Z,1520560908.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:49.326Z,1520560909.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:49.728Z,1520560909.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:50.130Z,1520560910.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:50.527Z,1520560910.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:50.927Z,1520560910.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:51.335Z,1520560911.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:51.734Z,1520560911.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:52.135Z,1520560912.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:52.535Z,1520560912.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:52.934Z,1520560912.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:53.334Z,1520560913.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:53.734Z,1520560913.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:54.134Z,1520560914.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:54.529Z,1520560914.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:54.935Z,1520560914.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:55.334Z,1520560915.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:55.723Z,1520560915.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:56.134Z,1520560916.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:56.535Z,1520560916.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:56.928Z,1520560916.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:57.330Z,1520560917.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:57.727Z,1520560917.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:58.127Z,1520560918.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:58.527Z,1520560918.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:58.927Z,1520560918.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:59.329Z,1520560919.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:01:59.733Z,1520560919.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:00.132Z,1520560920.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:00.534Z,1520560920.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:00.934Z,1520560920.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:01.333Z,1520560921.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:01.733Z,1520560921.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:02.134Z,1520560922.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:02.533Z,1520560922.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:02.931Z,1520560922.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:03.333Z,1520560923.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:03.734Z,1520560923.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:04.135Z,1520560924.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:04.547Z,1520560924.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:04.935Z,1520560924.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:05.331Z,1520560925.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:05.734Z,1520560925.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:06.134Z,1520560926.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:06.535Z,1520560926.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:06.934Z,1520560926.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:07.334Z,1520560927.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:07.731Z,1520560927.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:08.134Z,1520560928.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:08.164Z,1520560928.164 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-09T02:02:08.534Z,1520560928.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:11.769Z,1520560931.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:11.893Z,1520560931.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:12.255Z,1520560932.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:12.647Z,1520560932.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:13.051Z,1520560933.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:13.450Z,1520560933.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:13.844Z,1520560933.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:14.246Z,1520560934.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:14.650Z,1520560934.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:15.049Z,1520560935.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:15.449Z,1520560935.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:15.851Z,1520560935.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:16.253Z,1520560936.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:16.654Z,1520560936.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:17.053Z,1520560937.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:17.447Z,1520560937.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:17.850Z,1520560937.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:18.248Z,1520560938.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:18.651Z,1520560938.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:19.051Z,1520560939.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:19.450Z,1520560939.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:19.839Z,1520560939.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:20.242Z,1520560940.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:20.662Z,1520560940.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:21.054Z,1520560941.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:21.454Z,1520560941.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:21.842Z,1520560941.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:22.254Z,1520560942.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:22.655Z,1520560942.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:23.042Z,1520560943.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:23.439Z,1520560943.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:23.854Z,1520560943.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:24.242Z,1520560944.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:24.642Z,1520560944.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:25.038Z,1520560945.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:25.466Z,1520560945.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:25.839Z,1520560945.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:26.238Z,1520560946.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:26.662Z,1520560946.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:27.042Z,1520560947.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:27.447Z,1520560947.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:27.862Z,1520560947.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:28.246Z,1520560948.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:28.646Z,1520560948.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:29.042Z,1520560949.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:29.439Z,1520560949.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:29.846Z,1520560949.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:30.243Z,1520560950.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:30.639Z,1520560950.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:31.046Z,1520560951.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:31.461Z,1520560951.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:31.839Z,1520560951.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:32.243Z,1520560952.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:32.642Z,1520560952.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:33.046Z,1520560953.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:33.446Z,1520560953.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:33.842Z,1520560953.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:34.239Z,1520560954.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:34.642Z,1520560954.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:35.046Z,1520560955.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:35.442Z,1520560955.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:35.853Z,1520560955.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:36.249Z,1520560956.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:36.647Z,1520560956.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:37.052Z,1520560957.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:37.450Z,1520560957.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:37.849Z,1520560957.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:38.250Z,1520560958.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:38.654Z,1520560958.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:39.050Z,1520560959.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:39.448Z,1520560959.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:39.848Z,1520560959.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:40.250Z,1520560960.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:40.649Z,1520560960.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:41.045Z,1520560961.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:41.442Z,1520560961.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:41.841Z,1520560961.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:42.246Z,1520560962.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:42.643Z,1520560962.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:43.047Z,1520560963.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:43.443Z,1520560963.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:43.844Z,1520560963.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:44.243Z,1520560964.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:44.647Z,1520560964.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:45.052Z,1520560965.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:45.443Z,1520560965.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:45.851Z,1520560965.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:46.249Z,1520560966.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:46.650Z,1520560966.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:47.050Z,1520560967.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:47.450Z,1520560967.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:47.847Z,1520560967.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:48.249Z,1520560968.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:48.651Z,1520560968.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:49.050Z,1520560969.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:49.448Z,1520560969.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:49.853Z,1520560969.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:50.250Z,1520560970.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:50.649Z,1520560970.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:51.054Z,1520560971.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:51.439Z,1520560971.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:51.842Z,1520560971.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:52.242Z,1520560972.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:52.642Z,1520560972.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:53.042Z,1520560973.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:53.443Z,1520560973.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:53.839Z,1520560973.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:54.242Z,1520560974.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:54.642Z,1520560974.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:55.042Z,1520560975.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:55.442Z,1520560975.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:55.842Z,1520560975.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:56.246Z,1520560976.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:56.642Z,1520560976.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:57.041Z,1520560977.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:57.439Z,1520560977.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:57.842Z,1520560977.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:58.242Z,1520560978.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:58.642Z,1520560978.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:59.045Z,1520560979.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:59.442Z,1520560979.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:02:59.839Z,1520560979.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:00.248Z,1520560980.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:00.650Z,1520560980.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:01.047Z,1520560981.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:01.451Z,1520560981.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:01.849Z,1520560981.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:02.251Z,1520560982.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:02.650Z,1520560982.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:03.054Z,1520560983.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:03.447Z,1520560983.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:03.848Z,1520560983.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:04.250Z,1520560984.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:04.650Z,1520560984.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:05.050Z,1520560985.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:05.450Z,1520560985.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:05.848Z,1520560985.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:06.250Z,1520560986.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:06.649Z,1520560986.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:07.050Z,1520560987.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:07.450Z,1520560987.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:07.851Z,1520560987.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:08.249Z,1520560988.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:08.649Z,1520560988.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:11.803Z,1520560991.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:11.822Z,1520560991.822 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T02:03:11.822Z,1520560991.822 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 26
2018-03-09T02:03:11.822Z,1520560991.822 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T02:03:11.870Z,1520560991.870 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T02:03:11.931Z,1520560991.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:11.981Z,1520560991.981 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T02:03:11.981Z,1520560991.981 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 26
2018-03-09T02:03:12.322Z,1520560992.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:12.359Z,1520560992.359 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T02:03:12.360Z,1520560992.360 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T02:03:12.360Z,1520560992.360 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T02:03:12.713Z,1520560992.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:13.115Z,1520560993.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:13.522Z,1520560993.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:13.914Z,1520560993.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:14.315Z,1520560994.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:14.723Z,1520560994.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:15.117Z,1520560995.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:15.511Z,1520560995.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:15.910Z,1520560995.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:16.309Z,1520560996.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:16.710Z,1520560996.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:17.112Z,1520560997.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:17.518Z,1520560997.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:17.903Z,1520560997.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:18.317Z,1520560998.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:18.706Z,1520560998.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:19.101Z,1520560999.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:19.506Z,1520560999.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:19.906Z,1520560999.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:20.302Z,1520561000.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:20.707Z,1520561000.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:21.106Z,1520561001.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:21.498Z,1520561001.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:21.906Z,1520561001.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:22.314Z,1520561002.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:22.700Z,1520561002.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:23.116Z,1520561003.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:23.514Z,1520561003.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:23.905Z,1520561003.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:24.319Z,1520561004.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:24.711Z,1520561004.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:25.116Z,1520561005.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:25.521Z,1520561005.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:25.915Z,1520561005.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:26.319Z,1520561006.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:26.724Z,1520561006.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:27.119Z,1520561007.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:27.515Z,1520561007.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:27.923Z,1520561007.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:28.316Z,1520561008.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:28.703Z,1520561008.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:29.106Z,1520561009.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:29.502Z,1520561009.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:29.899Z,1520561009.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:30.310Z,1520561010.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:30.702Z,1520561010.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:31.106Z,1520561011.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:31.510Z,1520561011.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:31.902Z,1520561011.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:32.307Z,1520561012.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:32.706Z,1520561012.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:33.109Z,1520561013.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:33.506Z,1520561013.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:33.926Z,1520561013.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:34.302Z,1520561014.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:34.703Z,1520561014.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:35.106Z,1520561015.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:35.510Z,1520561015.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:35.903Z,1520561015.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:36.302Z,1520561016.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:36.710Z,1520561016.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:37.104Z,1520561017.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:37.506Z,1520561017.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:37.910Z,1520561017.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:38.303Z,1520561018.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:38.706Z,1520561018.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:39.110Z,1520561019.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:39.513Z,1520561019.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:39.911Z,1520561019.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:40.315Z,1520561020.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:40.707Z,1520561020.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:41.114Z,1520561021.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:41.515Z,1520561021.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:41.917Z,1520561021.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:42.323Z,1520561022.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:42.712Z,1520561022.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:43.120Z,1520561023.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:43.515Z,1520561023.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:43.914Z,1520561023.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:44.311Z,1520561024.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:44.718Z,1520561024.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:45.120Z,1520561025.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:45.511Z,1520561025.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:45.915Z,1520561025.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:46.314Z,1520561026.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:46.704Z,1520561026.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:47.125Z,1520561027.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:47.513Z,1520561027.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:47.903Z,1520561027.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:48.306Z,1520561028.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:48.710Z,1520561028.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:49.110Z,1520561029.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:49.506Z,1520561029.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:49.908Z,1520561029.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:50.306Z,1520561030.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:50.706Z,1520561030.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:51.110Z,1520561031.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:51.504Z,1520561031.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:51.906Z,1520561031.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:52.306Z,1520561032.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:52.703Z,1520561032.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:53.106Z,1520561033.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:53.510Z,1520561033.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:53.906Z,1520561033.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:54.306Z,1520561034.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:54.710Z,1520561034.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:55.106Z,1520561035.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:55.518Z,1520561035.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:55.910Z,1520561035.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:56.302Z,1520561036.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:56.706Z,1520561036.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:57.110Z,1520561037.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:57.514Z,1520561037.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:57.914Z,1520561037.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:58.316Z,1520561038.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:58.713Z,1520561038.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:59.113Z,1520561039.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:59.515Z,1520561039.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:03:59.914Z,1520561039.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:00.314Z,1520561040.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:00.714Z,1520561040.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:01.115Z,1520561041.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:01.515Z,1520561041.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:01.912Z,1520561041.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:02.311Z,1520561042.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:02.715Z,1520561042.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:03.116Z,1520561043.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:03.502Z,1520561043.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:03.916Z,1520561043.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:04.323Z,1520561044.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:04.719Z,1520561044.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:05.124Z,1520561045.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:05.505Z,1520561045.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:05.920Z,1520561045.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:06.317Z,1520561046.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:06.713Z,1520561046.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:07.102Z,1520561047.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:07.518Z,1520561047.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:07.917Z,1520561047.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:07.937Z,1520561047.937 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-09T02:04:07.938Z,1520561047.938 [Default:CheckIn:C.Wait] Stopped
2018-03-09T02:04:07.938Z,1520561047.938 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-09T02:04:07.938Z,1520561047.938 [Default:CheckIn:D] Running Loop=1
2018-03-09T02:04:08.305Z,1520561048.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:08.340Z,1520561048.340 [Default:CheckIn:D] Stopped
2018-03-09T02:04:08.340Z,1520561048.340 [Default:CheckIn:E] Running Loop=1
2018-03-09T02:04:08.727Z,1520561048.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:08.747Z,1520561048.747 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1098.392188 min 
2018-03-09T02:04:08.747Z,1520561048.747 [Default:CheckIn:E] Stopped
2018-03-09T02:04:08.747Z,1520561048.747 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-09T02:04:08.747Z,1520561048.747 [Default:CheckIn] Stopped
2018-03-09T02:04:08.747Z,1520561048.747 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-09T02:04:08.748Z,1520561048.748 [Default:CheckIn](INFO): Running loop #111
2018-03-09T02:04:08.748Z,1520561048.748 [Default:CheckIn] Running Loop=111
2018-03-09T02:04:08.748Z,1520561048.748 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-09T02:04:08.748Z,1520561048.748 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-09T02:04:11.926Z,1520561051.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:12.021Z,1520561052.021 [NAL9602](INFO): Powering up
2018-03-09T02:04:12.041Z,1520561052.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:12.399Z,1520561052.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:12.800Z,1520561052.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:13.204Z,1520561053.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:13.601Z,1520561053.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:14.004Z,1520561054.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:14.400Z,1520561054.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:14.790Z,1520561054.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:15.190Z,1520561055.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:15.590Z,1520561055.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:15.998Z,1520561055.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:16.398Z,1520561056.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:16.795Z,1520561056.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:17.200Z,1520561057.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:17.590Z,1520561057.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:17.998Z,1520561057.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:18.398Z,1520561058.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:18.794Z,1520561058.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:19.198Z,1520561059.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:19.598Z,1520561059.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:20.002Z,1520561060.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:20.398Z,1520561060.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:20.802Z,1520561060.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:21.197Z,1520561061.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:21.594Z,1520561061.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:22.006Z,1520561062.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:22.388Z,1520561062.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:22.826Z,1520561062.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:23.178Z,1520561063.178 [NAL9602](INFO): NAL9602 initialized
2018-03-09T02:04:23.194Z,1520561063.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:23.590Z,1520561063.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:24.005Z,1520561064.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:24.407Z,1520561064.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:24.802Z,1520561064.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:25.192Z,1520561065.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:25.591Z,1520561065.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:25.994Z,1520561065.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:26.393Z,1520561066.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:26.808Z,1520561066.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:27.190Z,1520561067.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:27.595Z,1520561067.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:27.990Z,1520561067.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:28.390Z,1520561068.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:28.824Z,1520561068.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:29.218Z,1520561069.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:29.597Z,1520561069.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:29.998Z,1520561069.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:30.402Z,1520561070.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:30.795Z,1520561070.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:31.203Z,1520561071.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:31.599Z,1520561071.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:31.998Z,1520561071.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:32.405Z,1520561072.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:32.797Z,1520561072.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:33.213Z,1520561073.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:33.594Z,1520561073.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:33.998Z,1520561073.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:34.390Z,1520561074.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:34.791Z,1520561074.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:35.210Z,1520561075.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:35.586Z,1520561075.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:35.991Z,1520561075.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:36.407Z,1520561076.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:36.795Z,1520561076.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:37.198Z,1520561077.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:37.595Z,1520561077.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:37.998Z,1520561077.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:38.399Z,1520561078.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:38.798Z,1520561078.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:39.199Z,1520561079.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:39.604Z,1520561079.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:39.993Z,1520561079.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:40.386Z,1520561080.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:40.790Z,1520561080.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:41.197Z,1520561081.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:41.599Z,1520561081.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:41.994Z,1520561081.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:42.402Z,1520561082.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:42.798Z,1520561082.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:43.226Z,1520561083.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:43.598Z,1520561083.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:43.000Z,1520561084.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:44.399Z,1520561084.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:44.799Z,1520561084.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:45.199Z,1520561085.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:45.600Z,1520561085.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:45.990Z,1520561085.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:46.390Z,1520561086.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:46.789Z,1520561086.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:47.207Z,1520561087.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:47.591Z,1520561087.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:47.991Z,1520561087.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:48.391Z,1520561088.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:48.792Z,1520561088.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:49.199Z,1520561089.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:49.599Z,1520561089.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:49.998Z,1520561089.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:50.399Z,1520561090.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:50.796Z,1520561090.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:51.203Z,1520561091.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:51.583Z,1520561091.583 [NAL9602](INFO): SBD MO Status=2, MOMSN=4912, MT Status=2, MTMSN=0
2018-03-09T02:04:51.583Z,1520561091.583 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-09T02:04:51.601Z,1520561091.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:52.002Z,1520561092.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:52.398Z,1520561092.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:52.784Z,1520561092.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:53.197Z,1520561093.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:53.599Z,1520561093.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:53.988Z,1520561093.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:54.390Z,1520561094.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:54.790Z,1520561094.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:55.204Z,1520561095.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:55.607Z,1520561095.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:56.005Z,1520561096.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:56.400Z,1520561096.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:56.798Z,1520561096.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:57.198Z,1520561097.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:57.588Z,1520561097.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:57.990Z,1520561097.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:58.391Z,1520561098.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:58.788Z,1520561098.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:59.209Z,1520561099.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:59.613Z,1520561099.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:04:59.986Z,1520561099.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:00.390Z,1520561100.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:00.790Z,1520561100.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:01.205Z,1520561101.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:01.596Z,1520561101.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:01.998Z,1520561101.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:02.394Z,1520561102.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:02.798Z,1520561102.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:03.202Z,1520561103.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:03.591Z,1520561103.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:03.995Z,1520561103.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:04.398Z,1520561104.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:04.788Z,1520561104.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:05.203Z,1520561105.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:05.590Z,1520561105.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:05.989Z,1520561105.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:06.390Z,1520561106.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:06.790Z,1520561106.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:07.195Z,1520561107.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:07.610Z,1520561107.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:08.017Z,1520561108.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:08.391Z,1520561108.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:08.810Z,1520561108.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:12.034Z,1520561112.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:12.170Z,1520561112.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:12.535Z,1520561112.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:12.934Z,1520561112.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:13.331Z,1520561113.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:13.732Z,1520561113.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:14.134Z,1520561114.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:14.531Z,1520561114.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:14.937Z,1520561114.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:15.340Z,1520561115.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:15.731Z,1520561115.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:16.129Z,1520561116.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:16.549Z,1520561116.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:16.942Z,1520561116.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:17.327Z,1520561117.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:17.726Z,1520561117.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:18.138Z,1520561118.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:18.526Z,1520561118.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:18.939Z,1520561118.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:19.324Z,1520561119.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:19.731Z,1520561119.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:20.126Z,1520561120.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:20.549Z,1520561120.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:20.945Z,1520561120.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:21.326Z,1520561121.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:21.724Z,1520561121.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:22.127Z,1520561122.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:22.527Z,1520561122.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:22.924Z,1520561122.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:23.334Z,1520561123.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:23.726Z,1520561123.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:24.131Z,1520561124.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:24.534Z,1520561124.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:24.949Z,1520561124.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:25.337Z,1520561125.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:25.736Z,1520561125.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:26.131Z,1520561126.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:26.530Z,1520561126.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:26.933Z,1520561126.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:27.339Z,1520561127.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:27.729Z,1520561127.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:28.129Z,1520561128.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:28.546Z,1520561128.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:28.920Z,1520561128.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:29.335Z,1520561129.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:29.727Z,1520561129.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:30.139Z,1520561130.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:30.525Z,1520561130.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:30.926Z,1520561130.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:31.337Z,1520561131.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:31.727Z,1520561131.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:32.126Z,1520561132.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:32.522Z,1520561132.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:32.926Z,1520561132.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:33.322Z,1520561133.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:33.736Z,1520561133.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:34.149Z,1520561134.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:34.526Z,1520561134.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:34.920Z,1520561134.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:35.326Z,1520561135.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:35.735Z,1520561135.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:36.130Z,1520561136.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:36.527Z,1520561136.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:36.932Z,1520561136.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:37.325Z,1520561137.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:37.727Z,1520561137.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:38.151Z,1520561138.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:38.541Z,1520561138.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:38.939Z,1520561138.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:39.339Z,1520561139.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:39.729Z,1520561139.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:40.134Z,1520561140.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:40.526Z,1520561140.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:40.924Z,1520561140.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:41.338Z,1520561141.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:41.733Z,1520561141.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:42.155Z,1520561142.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:42.549Z,1520561142.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:42.974Z,1520561142.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:43.344Z,1520561143.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:43.731Z,1520561143.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:44.131Z,1520561144.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:44.532Z,1520561144.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:44.952Z,1520561144.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:45.336Z,1520561145.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:45.735Z,1520561145.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:46.136Z,1520561146.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:46.527Z,1520561146.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:46.987Z,1520561146.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:47.346Z,1520561147.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:47.750Z,1520561147.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:48.150Z,1520561148.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:48.526Z,1520561148.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:48.926Z,1520561148.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:49.324Z,1520561149.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:49.727Z,1520561149.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:50.127Z,1520561150.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:50.520Z,1520561150.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:50.929Z,1520561150.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:51.326Z,1520561151.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:51.724Z,1520561151.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:52.138Z,1520561152.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:52.537Z,1520561152.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:52.941Z,1520561152.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:53.341Z,1520561153.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:53.730Z,1520561153.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:54.124Z,1520561154.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:54.534Z,1520561154.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:54.932Z,1520561154.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:55.328Z,1520561155.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:55.736Z,1520561155.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:56.133Z,1520561156.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:56.529Z,1520561156.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:56.934Z,1520561156.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:57.355Z,1520561157.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:57.740Z,1520561157.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:58.144Z,1520561158.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:58.546Z,1520561158.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:58.924Z,1520561158.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:59.326Z,1520561159.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:05:59.728Z,1520561159.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:00.126Z,1520561160.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:00.526Z,1520561160.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:00.926Z,1520561160.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:01.324Z,1520561161.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:01.731Z,1520561161.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:02.147Z,1520561162.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:02.543Z,1520561162.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:02.949Z,1520561162.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:03.345Z,1520561163.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:03.725Z,1520561163.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:04.126Z,1520561164.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:04.533Z,1520561164.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:04.924Z,1520561164.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:05.327Z,1520561165.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:05.734Z,1520561165.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:06.126Z,1520561166.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:06.531Z,1520561166.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:06.933Z,1520561166.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:07.341Z,1520561167.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:07.745Z,1520561167.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:08.149Z,1520561168.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:08.537Z,1520561168.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:08.936Z,1520561168.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:12.201Z,1520561172.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:12.342Z,1520561172.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:12.385Z,1520561172.385 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T02:06:12.385Z,1520561172.385 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 27
2018-03-09T02:06:12.385Z,1520561172.385 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T02:06:12.398Z,1520561172.398 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T02:06:12.701Z,1520561172.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:12.741Z,1520561172.741 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T02:06:12.741Z,1520561172.741 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 27
2018-03-09T02:06:13.113Z,1520561173.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:13.131Z,1520561173.131 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T02:06:13.132Z,1520561173.132 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T02:06:13.132Z,1520561173.132 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T02:06:13.487Z,1520561173.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:13.891Z,1520561173.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:14.291Z,1520561174.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:14.688Z,1520561174.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:15.088Z,1520561175.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:15.495Z,1520561175.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:15.888Z,1520561175.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:16.282Z,1520561176.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:16.682Z,1520561176.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:17.093Z,1520561177.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:17.507Z,1520561177.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:17.912Z,1520561177.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:18.293Z,1520561178.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:18.690Z,1520561178.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:19.098Z,1520561179.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:19.487Z,1520561179.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:19.890Z,1520561179.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:20.287Z,1520561180.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:20.688Z,1520561180.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:21.087Z,1520561181.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:21.487Z,1520561181.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:21.887Z,1520561181.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:22.297Z,1520561182.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:22.702Z,1520561182.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:23.096Z,1520561183.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:23.501Z,1520561183.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:23.891Z,1520561183.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:24.285Z,1520561184.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:24.694Z,1520561184.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:25.102Z,1520561185.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:25.483Z,1520561185.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:25.882Z,1520561185.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:26.282Z,1520561186.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:26.678Z,1520561186.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:27.082Z,1520561187.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:27.516Z,1520561187.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:27.893Z,1520561187.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:28.301Z,1520561188.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:28.701Z,1520561188.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:29.090Z,1520561189.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:29.491Z,1520561189.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:29.889Z,1520561189.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:30.290Z,1520561190.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:30.696Z,1520561190.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:31.093Z,1520561191.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:31.486Z,1520561191.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:31.901Z,1520561191.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:32.298Z,1520561192.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:32.701Z,1520561192.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:33.106Z,1520561193.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:33.502Z,1520561193.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:33.901Z,1520561193.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:34.303Z,1520561194.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:34.683Z,1520561194.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:35.100Z,1520561195.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:35.482Z,1520561195.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:35.886Z,1520561195.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:36.278Z,1520561196.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:36.686Z,1520561196.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:37.083Z,1520561197.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:37.478Z,1520561197.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:37.901Z,1520561197.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:38.306Z,1520561198.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:38.693Z,1520561198.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:39.110Z,1520561199.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:39.482Z,1520561199.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:39.882Z,1520561199.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:40.282Z,1520561200.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:40.682Z,1520561200.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:41.082Z,1520561201.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:41.482Z,1520561201.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:41.883Z,1520561201.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:42.290Z,1520561202.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:42.690Z,1520561202.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:43.107Z,1520561203.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:43.501Z,1520561203.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:43.902Z,1520561203.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:44.301Z,1520561204.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:44.686Z,1520561204.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:45.090Z,1520561205.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:45.490Z,1520561205.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:45.886Z,1520561205.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:46.291Z,1520561206.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:46.692Z,1520561206.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:47.090Z,1520561207.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:47.498Z,1520561207.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:47.887Z,1520561207.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:48.296Z,1520561208.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:48.713Z,1520561208.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:49.105Z,1520561209.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:49.497Z,1520561209.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:49.882Z,1520561209.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:50.278Z,1520561210.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:50.686Z,1520561210.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:51.082Z,1520561211.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:51.483Z,1520561211.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:51.886Z,1520561211.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:52.303Z,1520561212.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:52.682Z,1520561212.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:53.103Z,1520561213.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:53.503Z,1520561213.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:53.898Z,1520561213.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:54.300Z,1520561214.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:54.713Z,1520561214.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:55.086Z,1520561215.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:55.486Z,1520561215.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:55.882Z,1520561215.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:56.283Z,1520561216.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:56.690Z,1520561216.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:57.090Z,1520561217.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:57.487Z,1520561217.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:57.889Z,1520561217.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:58.287Z,1520561218.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:58.705Z,1520561218.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:59.109Z,1520561219.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:59.497Z,1520561219.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:06:59.905Z,1520561219.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:00.287Z,1520561220.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:00.688Z,1520561220.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:01.095Z,1520561221.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:01.490Z,1520561221.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:01.890Z,1520561221.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:02.291Z,1520561222.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:02.694Z,1520561222.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:03.091Z,1520561223.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:03.495Z,1520561223.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:03.901Z,1520561223.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:04.300Z,1520561224.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:04.706Z,1520561224.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:05.105Z,1520561225.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:05.482Z,1520561225.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:05.882Z,1520561225.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:06.282Z,1520561226.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:06.682Z,1520561226.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:07.082Z,1520561227.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:07.479Z,1520561227.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:07.883Z,1520561227.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:08.284Z,1520561228.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:08.677Z,1520561228.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:09.093Z,1520561229.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:12.237Z,1520561232.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:12.374Z,1520561232.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:12.764Z,1520561232.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:13.136Z,1520561233.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:13.539Z,1520561233.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:13.944Z,1520561233.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:14.336Z,1520561234.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:14.733Z,1520561234.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:15.134Z,1520561235.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:15.535Z,1520561235.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:15.925Z,1520561235.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:16.338Z,1520561236.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:16.750Z,1520561236.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:17.138Z,1520561237.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:17.543Z,1520561237.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:17.941Z,1520561237.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:18.322Z,1520561238.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:18.726Z,1520561238.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:19.126Z,1520561239.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:19.526Z,1520561239.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:19.926Z,1520561239.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:20.326Z,1520561240.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:20.722Z,1520561240.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:21.126Z,1520561241.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:21.527Z,1520561241.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:21.941Z,1520561241.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:22.344Z,1520561242.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:22.737Z,1520561242.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:23.149Z,1520561243.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:23.526Z,1520561243.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:23.926Z,1520561243.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:24.326Z,1520561244.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:24.731Z,1520561244.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:25.134Z,1520561245.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:25.527Z,1520561245.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:25.938Z,1520561245.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:26.336Z,1520561246.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:26.731Z,1520561246.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:27.137Z,1520561247.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:27.537Z,1520561247.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:27.937Z,1520561247.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:28.344Z,1520561248.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:28.736Z,1520561248.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:29.129Z,1520561249.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:29.546Z,1520561249.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:29.926Z,1520561249.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:30.322Z,1520561250.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:30.730Z,1520561250.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:31.127Z,1520561251.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:31.522Z,1520561251.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:31.945Z,1520561251.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:32.350Z,1520561252.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:32.733Z,1520561252.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:33.147Z,1520561253.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:33.546Z,1520561253.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:33.926Z,1520561253.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:34.330Z,1520561254.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:34.727Z,1520561254.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:35.126Z,1520561255.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:35.526Z,1520561255.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:35.927Z,1520561255.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:36.330Z,1520561256.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:36.726Z,1520561256.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:37.126Z,1520561257.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:37.533Z,1520561257.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:37.938Z,1520561257.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:38.351Z,1520561258.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:38.737Z,1520561258.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:39.126Z,1520561259.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:39.526Z,1520561259.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:39.926Z,1520561259.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:40.326Z,1520561260.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:40.726Z,1520561260.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:41.126Z,1520561261.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:41.530Z,1520561261.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:41.926Z,1520561261.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:42.326Z,1520561262.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:42.790Z,1520561262.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:43.147Z,1520561263.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:43.540Z,1520561263.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:43.942Z,1520561263.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:44.326Z,1520561264.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:44.729Z,1520561264.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:45.149Z,1520561265.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:45.528Z,1520561265.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:45.924Z,1520561265.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:46.328Z,1520561266.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:46.727Z,1520561266.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:47.127Z,1520561267.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:47.548Z,1520561267.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:47.946Z,1520561267.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:48.337Z,1520561268.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:48.747Z,1520561268.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:49.148Z,1520561269.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:49.528Z,1520561269.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:49.927Z,1520561269.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:50.327Z,1520561270.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:50.724Z,1520561270.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:51.130Z,1520561271.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:51.530Z,1520561271.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:51.935Z,1520561271.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:52.336Z,1520561272.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:52.735Z,1520561272.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:53.136Z,1520561273.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:53.559Z,1520561273.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:53.941Z,1520561273.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:54.345Z,1520561274.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:54.736Z,1520561274.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:55.135Z,1520561275.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:55.526Z,1520561275.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:55.946Z,1520561275.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:56.331Z,1520561276.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:56.720Z,1520561276.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:57.131Z,1520561277.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:57.522Z,1520561277.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:57.920Z,1520561277.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:58.350Z,1520561278.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:58.733Z,1520561278.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:59.141Z,1520561279.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:59.537Z,1520561279.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:07:59.926Z,1520561279.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:00.333Z,1520561280.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:00.734Z,1520561280.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:01.135Z,1520561281.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:01.530Z,1520561281.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:01.932Z,1520561281.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:02.331Z,1520561282.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:02.731Z,1520561282.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:03.132Z,1520561283.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:03.545Z,1520561283.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:03.937Z,1520561283.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:04.349Z,1520561284.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:04.749Z,1520561284.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:05.120Z,1520561285.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:05.526Z,1520561285.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:05.927Z,1520561285.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:06.322Z,1520561286.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:06.726Z,1520561286.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:07.148Z,1520561287.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:07.524Z,1520561287.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:07.938Z,1520561287.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:08.339Z,1520561288.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:08.737Z,1520561288.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:09.137Z,1520561289.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:12.525Z,1520561292.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:12.653Z,1520561292.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:13.061Z,1520561293.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:13.429Z,1520561293.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:13.842Z,1520561293.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:14.241Z,1520561294.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:14.654Z,1520561294.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:15.041Z,1520561295.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:15.429Z,1520561295.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:15.831Z,1520561295.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:16.227Z,1520561296.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:16.635Z,1520561296.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:17.033Z,1520561297.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:17.432Z,1520561297.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:17.834Z,1520561297.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:18.234Z,1520561298.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:18.626Z,1520561298.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:19.044Z,1520561299.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:19.444Z,1520561299.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:19.845Z,1520561299.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:20.248Z,1520561300.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:20.625Z,1520561300.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:21.024Z,1520561301.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:21.427Z,1520561301.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:21.827Z,1520561301.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:22.235Z,1520561302.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:22.644Z,1520561302.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:23.035Z,1520561303.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:23.431Z,1520561303.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:23.831Z,1520561303.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:24.241Z,1520561304.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:24.640Z,1520561304.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:25.044Z,1520561305.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:25.441Z,1520561305.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:25.822Z,1520561305.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:26.233Z,1520561306.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:26.641Z,1520561306.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:27.024Z,1520561307.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:27.447Z,1520561307.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:27.822Z,1520561307.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:28.226Z,1520561308.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:28.626Z,1520561308.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:29.022Z,1520561309.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:29.445Z,1520561309.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:29.857Z,1520561309.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:30.250Z,1520561310.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:30.641Z,1520561310.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:31.030Z,1520561311.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:31.435Z,1520561311.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:31.824Z,1520561311.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:32.230Z,1520561312.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:32.626Z,1520561312.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:33.030Z,1520561313.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:33.427Z,1520561313.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:33.835Z,1520561313.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:34.232Z,1520561314.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:34.645Z,1520561314.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:35.060Z,1520561315.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:35.437Z,1520561315.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:35.845Z,1520561315.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:36.239Z,1520561316.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:36.632Z,1520561316.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:37.032Z,1520561317.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:37.432Z,1520561317.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:37.830Z,1520561317.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:38.233Z,1520561318.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:38.634Z,1520561318.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:39.025Z,1520561319.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:39.438Z,1520561319.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:39.845Z,1520561319.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:40.246Z,1520561320.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:40.649Z,1520561320.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:41.046Z,1520561321.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:41.426Z,1520561321.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:41.826Z,1520561321.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:42.248Z,1520561322.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:42.637Z,1520561322.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:43.047Z,1520561323.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:43.426Z,1520561323.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:43.822Z,1520561323.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:44.226Z,1520561324.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:44.626Z,1520561324.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:45.050Z,1520561325.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:45.445Z,1520561325.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:45.853Z,1520561325.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:46.243Z,1520561326.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:46.626Z,1520561326.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:47.026Z,1520561327.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:47.422Z,1520561327.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:47.830Z,1520561327.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:48.230Z,1520561328.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:48.626Z,1520561328.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:49.048Z,1520561329.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:49.431Z,1520561329.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:49.827Z,1520561329.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:50.248Z,1520561330.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:50.647Z,1520561330.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:51.040Z,1520561331.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:51.451Z,1520561331.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:51.830Z,1520561331.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:52.222Z,1520561332.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:52.627Z,1520561332.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:53.026Z,1520561333.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:53.426Z,1520561333.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:53.830Z,1520561333.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:54.232Z,1520561334.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:54.633Z,1520561334.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:55.032Z,1520561335.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:55.437Z,1520561335.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:55.838Z,1520561335.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:56.244Z,1520561336.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:56.646Z,1520561336.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:57.029Z,1520561337.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:57.433Z,1520561337.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:57.826Z,1520561337.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:58.226Z,1520561338.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:58.626Z,1520561338.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:59.030Z,1520561339.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:59.431Z,1520561339.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:08:59.826Z,1520561339.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:00.226Z,1520561340.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:00.641Z,1520561340.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:01.037Z,1520561341.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:01.441Z,1520561341.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:01.841Z,1520561341.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:02.231Z,1520561342.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:02.631Z,1520561342.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:03.035Z,1520561343.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:03.442Z,1520561343.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:03.831Z,1520561343.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:04.239Z,1520561344.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:04.643Z,1520561344.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:05.035Z,1520561345.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:05.425Z,1520561345.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:05.856Z,1520561345.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:06.245Z,1520561346.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:06.640Z,1520561346.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:07.045Z,1520561347.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:07.432Z,1520561347.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:07.834Z,1520561347.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:08.234Z,1520561348.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:08.635Z,1520561348.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:09.035Z,1520561349.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:09.060Z,1520561349.060 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-09T02:04:08.7Z
2018-03-09T02:09:09.060Z,1520561349.060 [Default:CheckIn:Read_GPS] Stopped
2018-03-09T02:09:09.061Z,1520561349.061 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-09T02:09:09.446Z,1520561349.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:12.801Z,1520561352.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:12.940Z,1520561352.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:13.295Z,1520561353.295 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0444.lzma
2018-03-09T02:09:13.346Z,1520561353.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:13.368Z,1520561353.368 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T02:09:13.369Z,1520561353.369 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 28
2018-03-09T02:09:13.369Z,1520561353.369 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T02:09:13.401Z,1520561353.401 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T02:09:13.711Z,1520561353.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:13.759Z,1520561353.759 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T02:09:13.759Z,1520561353.759 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 28
2018-03-09T02:09:14.076Z,1520561354.076 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0444.lzma.bak
2018-03-09T02:09:14.076Z,1520561354.076 [DataOverHttps](INFO): SBD MOMSN=7991309
2018-03-09T02:09:14.115Z,1520561354.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:14.150Z,1520561354.150 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T02:09:14.150Z,1520561354.150 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T02:09:14.150Z,1520561354.150 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T02:09:14.695Z,1520561354.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:14.946Z,1520561354.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:18.229Z,1520561358.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:18.354Z,1520561358.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:18.749Z,1520561358.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:19.137Z,1520561359.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:19.530Z,1520561359.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:19.933Z,1520561359.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:20.327Z,1520561360.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:23.610Z,1520561363.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:23.762Z,1520561363.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:24.109Z,1520561364.109 [DataOverHttps](INFO): Sending 122 bytes from file Logs/20180308T074127/Express0445.lzma
2018-03-09T02:09:24.149Z,1520561364.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:24.518Z,1520561364.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:24.900Z,1520561364.900 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0445.lzma.bak
2018-03-09T02:09:24.901Z,1520561364.901 [DataOverHttps](INFO): SBD MOMSN=7991311
2018-03-09T02:09:24.933Z,1520561364.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:25.500Z,1520561365.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:25.520Z,1520561365.520 [Default:CheckIn:Read_Iridium] Stopped
2018-03-09T02:09:25.520Z,1520561365.520 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-09T02:09:25.520Z,1520561365.520 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-09T02:09:25.703Z,1520561365.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:26.107Z,1520561366.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:29.261Z,1520561369.261 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-09T02:09:29.324Z,1520561369.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:29.470Z,1520561369.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:29.867Z,1520561369.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:30.257Z,1520561370.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:30.654Z,1520561370.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:31.068Z,1520561371.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:31.463Z,1520561371.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:31.843Z,1520561371.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:32.250Z,1520561372.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:32.645Z,1520561372.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:33.045Z,1520561373.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:33.454Z,1520561373.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:33.854Z,1520561373.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:34.254Z,1520561374.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:34.650Z,1520561374.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:35.046Z,1520561375.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:35.450Z,1520561375.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:35.850Z,1520561375.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:36.272Z,1520561376.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:36.647Z,1520561376.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:37.051Z,1520561377.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:37.450Z,1520561377.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:37.851Z,1520561377.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:38.259Z,1520561378.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:38.655Z,1520561378.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:39.058Z,1520561379.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:39.458Z,1520561379.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:39.854Z,1520561379.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:40.262Z,1520561380.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:40.653Z,1520561380.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:41.059Z,1520561381.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:41.459Z,1520561381.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:41.868Z,1520561381.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:42.252Z,1520561382.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:42.659Z,1520561382.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:43.061Z,1520561383.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:43.450Z,1520561383.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:43.847Z,1520561383.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:44.269Z,1520561384.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:44.650Z,1520561384.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:45.050Z,1520561385.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:45.452Z,1520561385.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:45.858Z,1520561385.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:46.257Z,1520561386.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:46.656Z,1520561386.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:47.057Z,1520561387.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:47.455Z,1520561387.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:47.854Z,1520561387.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:48.261Z,1520561388.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:48.656Z,1520561388.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:49.062Z,1520561389.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:49.458Z,1520561389.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:49.855Z,1520561389.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:50.267Z,1520561390.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:50.661Z,1520561390.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:51.062Z,1520561391.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:51.453Z,1520561391.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:51.846Z,1520561391.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:52.262Z,1520561392.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:52.671Z,1520561392.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:53.050Z,1520561393.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:53.447Z,1520561393.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:53.861Z,1520561393.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:54.250Z,1520561394.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:54.647Z,1520561394.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:55.050Z,1520561395.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:55.454Z,1520561395.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:55.847Z,1520561395.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:56.270Z,1520561396.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:56.650Z,1520561396.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:57.050Z,1520561397.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:57.472Z,1520561397.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:57.845Z,1520561397.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:58.246Z,1520561398.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:58.650Z,1520561398.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:59.046Z,1520561399.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:59.447Z,1520561399.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:09:59.838Z,1520561399.838 [NAL9602](INFO): Powering down
2018-03-09T02:09:59.856Z,1520561399.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:00.254Z,1520561400.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:00.647Z,1520561400.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:01.058Z,1520561401.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:01.449Z,1520561401.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:01.852Z,1520561401.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:02.263Z,1520561402.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:02.657Z,1520561402.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:03.059Z,1520561403.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:03.459Z,1520561403.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:03.858Z,1520561403.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:04.259Z,1520561404.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:04.658Z,1520561404.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:05.058Z,1520561405.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:05.457Z,1520561405.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:05.859Z,1520561405.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:06.259Z,1520561406.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:06.657Z,1520561406.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:07.061Z,1520561407.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:07.459Z,1520561407.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:07.856Z,1520561407.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:08.259Z,1520561408.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:08.658Z,1520561408.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:09.062Z,1520561409.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:09.458Z,1520561409.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:09.858Z,1520561409.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:10.261Z,1520561410.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:10.658Z,1520561410.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:11.058Z,1520561411.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:11.455Z,1520561411.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:11.858Z,1520561411.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:12.258Z,1520561412.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:12.655Z,1520561412.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:13.067Z,1520561413.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:13.462Z,1520561413.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:13.855Z,1520561413.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:14.250Z,1520561414.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:14.646Z,1520561414.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:15.050Z,1520561415.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:15.450Z,1520561415.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:15.854Z,1520561415.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:16.270Z,1520561416.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:16.654Z,1520561416.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:17.050Z,1520561417.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:17.451Z,1520561417.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:17.850Z,1520561417.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:18.254Z,1520561418.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:18.648Z,1520561418.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:19.050Z,1520561419.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:19.454Z,1520561419.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:19.851Z,1520561419.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:20.259Z,1520561420.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:20.659Z,1520561420.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:21.061Z,1520561421.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:21.459Z,1520561421.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:21.857Z,1520561421.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:22.258Z,1520561422.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:22.658Z,1520561422.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:23.061Z,1520561423.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:23.458Z,1520561423.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:23.858Z,1520561423.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:24.258Z,1520561424.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:24.653Z,1520561424.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:25.058Z,1520561425.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:25.459Z,1520561425.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:25.856Z,1520561425.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:26.258Z,1520561426.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:29.401Z,1520561429.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:29.517Z,1520561429.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:29.875Z,1520561429.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:30.274Z,1520561430.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:30.674Z,1520561430.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:31.094Z,1520561431.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:31.477Z,1520561431.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:31.871Z,1520561431.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:32.275Z,1520561432.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:32.678Z,1520561432.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:33.069Z,1520561433.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:33.483Z,1520561433.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:33.876Z,1520561433.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:34.271Z,1520561434.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:34.674Z,1520561434.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:35.078Z,1520561435.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:35.471Z,1520561435.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:35.873Z,1520561435.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:36.274Z,1520561436.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:36.671Z,1520561436.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:37.074Z,1520561437.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:37.478Z,1520561437.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:37.874Z,1520561437.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:38.283Z,1520561438.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:38.678Z,1520561438.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:39.075Z,1520561439.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:39.481Z,1520561439.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:39.869Z,1520561439.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:40.278Z,1520561440.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:40.674Z,1520561440.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:41.078Z,1520561441.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:41.462Z,1520561441.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:41.875Z,1520561441.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:42.273Z,1520561442.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:42.662Z,1520561442.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:43.074Z,1520561443.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:43.469Z,1520561443.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:43.866Z,1520561443.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:44.266Z,1520561444.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:44.666Z,1520561444.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:45.066Z,1520561445.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:45.487Z,1520561445.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:45.861Z,1520561445.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:46.263Z,1520561446.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:46.667Z,1520561446.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:47.066Z,1520561447.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:47.466Z,1520561447.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:47.866Z,1520561447.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:48.266Z,1520561448.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:48.672Z,1520561448.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:49.070Z,1520561449.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:49.468Z,1520561449.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:49.870Z,1520561449.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:50.273Z,1520561450.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:50.673Z,1520561450.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:51.075Z,1520561451.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:51.474Z,1520561451.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:51.877Z,1520561451.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:52.270Z,1520561452.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:52.683Z,1520561452.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:53.074Z,1520561453.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:53.476Z,1520561453.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:53.875Z,1520561453.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:54.279Z,1520561454.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:54.679Z,1520561454.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:55.074Z,1520561455.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:55.471Z,1520561455.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:55.874Z,1520561455.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:56.274Z,1520561456.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:56.674Z,1520561456.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:57.076Z,1520561457.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:57.483Z,1520561457.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:57.863Z,1520561457.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:58.269Z,1520561458.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:58.685Z,1520561458.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:59.066Z,1520561459.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:59.466Z,1520561459.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:10:59.866Z,1520561459.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:00.271Z,1520561460.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:00.666Z,1520561460.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:01.094Z,1520561461.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:01.463Z,1520561461.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:01.867Z,1520561461.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:02.266Z,1520561462.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:02.663Z,1520561462.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:03.068Z,1520561463.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:03.471Z,1520561463.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:03.867Z,1520561463.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:04.282Z,1520561464.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:04.671Z,1520561464.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:05.075Z,1520561465.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:05.474Z,1520561465.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:05.874Z,1520561465.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:06.279Z,1520561466.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:06.674Z,1520561466.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:07.074Z,1520561467.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:07.471Z,1520561467.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:07.878Z,1520561467.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:08.274Z,1520561468.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:08.671Z,1520561468.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:09.069Z,1520561469.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:09.469Z,1520561469.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:09.864Z,1520561469.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:10.278Z,1520561470.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:10.666Z,1520561470.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:11.066Z,1520561471.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:11.478Z,1520561471.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:11.887Z,1520561471.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:12.262Z,1520561472.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:12.666Z,1520561472.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:13.086Z,1520561473.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:13.462Z,1520561473.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:13.870Z,1520561473.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:14.266Z,1520561474.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:14.667Z,1520561474.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:15.070Z,1520561475.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:15.466Z,1520561475.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:15.866Z,1520561475.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:16.270Z,1520561476.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:16.667Z,1520561476.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:17.062Z,1520561477.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:17.470Z,1520561477.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:17.885Z,1520561477.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:18.266Z,1520561478.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:18.677Z,1520561478.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:19.073Z,1520561479.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:19.468Z,1520561479.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:19.877Z,1520561479.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:20.277Z,1520561480.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:20.675Z,1520561480.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:21.078Z,1520561481.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:21.474Z,1520561481.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:21.874Z,1520561481.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:22.279Z,1520561482.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:22.678Z,1520561482.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:23.072Z,1520561483.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:23.471Z,1520561483.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:23.873Z,1520561483.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:24.281Z,1520561484.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:24.673Z,1520561484.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:25.077Z,1520561485.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:25.466Z,1520561485.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:25.864Z,1520561485.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:26.266Z,1520561486.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:29.470Z,1520561489.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:29.594Z,1520561489.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:29.958Z,1520561489.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:30.353Z,1520561490.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:30.745Z,1520561490.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:31.151Z,1520561491.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:31.552Z,1520561491.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:31.935Z,1520561491.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:32.364Z,1520561492.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:32.742Z,1520561492.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:33.138Z,1520561493.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:33.542Z,1520561493.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:33.941Z,1520561493.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:34.338Z,1520561494.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:34.753Z,1520561494.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:35.144Z,1520561495.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:35.536Z,1520561495.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:35.946Z,1520561495.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:36.342Z,1520561496.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:36.737Z,1520561496.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:37.148Z,1520561497.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:37.544Z,1520561497.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:37.951Z,1520561497.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:38.351Z,1520561498.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:38.750Z,1520561498.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:39.151Z,1520561499.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:39.561Z,1520561499.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:39.942Z,1520561499.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:40.338Z,1520561500.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:40.762Z,1520561500.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:41.142Z,1520561501.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:41.538Z,1520561501.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:41.947Z,1520561501.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:42.338Z,1520561502.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:42.738Z,1520561502.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:43.142Z,1520561503.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:43.546Z,1520561503.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:43.939Z,1520561503.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:44.350Z,1520561504.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:44.742Z,1520561504.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:45.147Z,1520561505.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:45.550Z,1520561505.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:45.951Z,1520561505.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:46.350Z,1520561506.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:46.754Z,1520561506.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:47.150Z,1520561507.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:47.547Z,1520561507.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:47.944Z,1520561507.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:48.345Z,1520561508.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:48.749Z,1520561508.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:49.159Z,1520561509.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:49.538Z,1520561509.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:49.934Z,1520561509.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:50.353Z,1520561510.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:50.742Z,1520561510.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:51.138Z,1520561511.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:51.544Z,1520561511.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:51.942Z,1520561511.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:52.339Z,1520561512.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:52.762Z,1520561512.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:53.142Z,1520561513.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:53.535Z,1520561513.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:53.967Z,1520561513.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:54.349Z,1520561514.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:54.743Z,1520561514.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:55.150Z,1520561515.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:55.542Z,1520561515.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:55.939Z,1520561515.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:56.347Z,1520561516.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:56.746Z,1520561516.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:57.151Z,1520561517.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:57.550Z,1520561517.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:57.953Z,1520561517.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:58.354Z,1520561518.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:58.759Z,1520561518.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:59.150Z,1520561519.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:59.550Z,1520561519.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:11:59.962Z,1520561519.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:00.338Z,1520561520.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:00.750Z,1520561520.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:01.149Z,1520561521.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:01.550Z,1520561521.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:01.938Z,1520561521.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:02.345Z,1520561522.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:02.738Z,1520561522.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:03.147Z,1520561523.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:03.542Z,1520561523.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:03.938Z,1520561523.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:04.339Z,1520561524.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:04.742Z,1520561524.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:05.142Z,1520561525.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:05.542Z,1520561525.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:05.947Z,1520561525.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:06.343Z,1520561526.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:06.740Z,1520561526.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:07.151Z,1520561527.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:07.551Z,1520561527.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:07.948Z,1520561527.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:08.349Z,1520561528.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:08.380Z,1520561528.380 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-09T02:12:08.750Z,1520561528.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:09.147Z,1520561529.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:09.546Z,1520561529.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:09.950Z,1520561529.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:10.346Z,1520561530.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:10.750Z,1520561530.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:11.146Z,1520561531.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:11.550Z,1520561531.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:11.950Z,1520561531.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:12.350Z,1520561532.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:12.749Z,1520561532.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:13.150Z,1520561533.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:13.554Z,1520561533.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:13.948Z,1520561533.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:14.351Z,1520561534.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:14.374Z,1520561534.374 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T02:12:14.374Z,1520561534.374 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 29
2018-03-09T02:12:14.374Z,1520561534.374 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T02:12:14.386Z,1520561534.386 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T02:12:14.752Z,1520561534.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:14.789Z,1520561534.789 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T02:12:14.789Z,1520561534.789 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 29
2018-03-09T02:12:15.138Z,1520561535.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:15.174Z,1520561535.174 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T02:12:15.174Z,1520561535.174 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T02:12:15.175Z,1520561535.175 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T02:12:15.562Z,1520561535.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:15.939Z,1520561535.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:16.338Z,1520561536.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:16.742Z,1520561536.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:17.146Z,1520561537.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:17.536Z,1520561537.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:17.942Z,1520561537.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:18.342Z,1520561538.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:18.739Z,1520561538.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:19.147Z,1520561539.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:19.551Z,1520561539.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:19.949Z,1520561539.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:20.350Z,1520561540.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:20.751Z,1520561540.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:21.149Z,1520561541.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:21.556Z,1520561541.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:21.953Z,1520561541.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:22.351Z,1520561542.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:22.750Z,1520561542.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:23.150Z,1520561543.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:23.547Z,1520561543.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:23.950Z,1520561543.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:24.347Z,1520561544.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:24.736Z,1520561544.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:25.142Z,1520561545.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:25.542Z,1520561545.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:25.942Z,1520561545.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:26.342Z,1520561546.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:29.603Z,1520561549.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:29.720Z,1520561549.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:30.083Z,1520561550.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:30.486Z,1520561550.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:30.885Z,1520561550.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:31.287Z,1520561551.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:31.685Z,1520561551.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:32.080Z,1520561552.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:32.508Z,1520561552.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:32.881Z,1520561552.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:33.321Z,1520561553.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:33.693Z,1520561553.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:34.066Z,1520561554.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:34.494Z,1520561554.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:34.901Z,1520561554.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:35.311Z,1520561555.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:35.667Z,1520561555.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:36.099Z,1520561556.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:36.480Z,1520561556.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:36.867Z,1520561556.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:37.281Z,1520561557.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:37.684Z,1520561557.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:38.087Z,1520561558.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:38.487Z,1520561558.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:38.874Z,1520561558.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:39.273Z,1520561559.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:39.717Z,1520561559.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:40.075Z,1520561560.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:40.520Z,1520561560.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:40.887Z,1520561560.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:41.288Z,1520561561.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:41.687Z,1520561561.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:42.105Z,1520561562.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:42.510Z,1520561562.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:42.875Z,1520561562.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:43.291Z,1520561563.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:43.696Z,1520561563.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:44.092Z,1520561564.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:44.491Z,1520561564.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:44.884Z,1520561564.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:45.266Z,1520561565.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:45.679Z,1520561565.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:46.078Z,1520561566.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:46.466Z,1520561566.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:46.876Z,1520561566.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:47.312Z,1520561567.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:47.667Z,1520561567.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:48.104Z,1520561568.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:48.505Z,1520561568.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:48.880Z,1520561568.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:49.291Z,1520561569.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:49.691Z,1520561569.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:50.082Z,1520561570.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:50.513Z,1520561570.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:50.889Z,1520561570.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:51.302Z,1520561571.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:51.686Z,1520561571.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:52.092Z,1520561572.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:52.481Z,1520561572.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:52.896Z,1520561572.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:53.290Z,1520561573.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:53.674Z,1520561573.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:54.090Z,1520561574.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:54.468Z,1520561574.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:54.866Z,1520561574.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:55.279Z,1520561575.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:55.685Z,1520561575.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:56.103Z,1520561576.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:56.489Z,1520561576.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:56.866Z,1520561576.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:57.273Z,1520561577.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:57.702Z,1520561577.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:58.091Z,1520561578.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:58.507Z,1520561578.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:58.889Z,1520561578.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:59.287Z,1520561579.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:12:59.682Z,1520561579.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:00.087Z,1520561580.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:00.487Z,1520561580.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:00.881Z,1520561580.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:01.289Z,1520561581.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:01.667Z,1520561581.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:02.101Z,1520561582.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:02.471Z,1520561582.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:02.866Z,1520561582.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:03.282Z,1520561583.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:03.687Z,1520561583.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:04.091Z,1520561584.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:04.509Z,1520561584.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:04.908Z,1520561584.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:05.277Z,1520561585.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:05.689Z,1520561585.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:06.102Z,1520561586.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:06.483Z,1520561586.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:06.891Z,1520561586.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:07.286Z,1520561587.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:07.678Z,1520561587.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:08.093Z,1520561588.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:08.482Z,1520561588.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:08.866Z,1520561588.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:09.266Z,1520561589.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:09.716Z,1520561589.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:10.079Z,1520561590.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:10.516Z,1520561590.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:10.900Z,1520561590.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:11.281Z,1520561591.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:11.694Z,1520561591.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:12.097Z,1520561592.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:12.504Z,1520561592.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:12.899Z,1520561592.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:13.305Z,1520561593.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:13.680Z,1520561593.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:14.087Z,1520561594.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:14.481Z,1520561594.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:14.867Z,1520561594.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:15.287Z,1520561595.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:15.680Z,1520561595.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:16.081Z,1520561596.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:16.479Z,1520561596.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:16.914Z,1520561596.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:17.279Z,1520561597.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:17.711Z,1520561597.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:18.088Z,1520561598.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:18.489Z,1520561598.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:18.899Z,1520561598.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:19.301Z,1520561599.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:19.667Z,1520561599.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:20.084Z,1520561600.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:20.497Z,1520561600.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:20.867Z,1520561600.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:21.290Z,1520561601.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:21.681Z,1520561601.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:22.077Z,1520561602.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:22.483Z,1520561602.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:22.879Z,1520561602.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:23.274Z,1520561603.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:23.676Z,1520561603.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:24.080Z,1520561604.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:24.513Z,1520561604.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:24.872Z,1520561604.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:25.285Z,1520561605.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:25.667Z,1520561605.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:26.095Z,1520561606.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:26.492Z,1520561606.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:29.713Z,1520561609.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:29.828Z,1520561609.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:30.189Z,1520561610.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:30.580Z,1520561610.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:30.991Z,1520561610.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:31.380Z,1520561611.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:31.771Z,1520561611.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:32.192Z,1520561612.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:32.594Z,1520561612.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:32.985Z,1520561612.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:33.395Z,1520561613.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:33.786Z,1520561613.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:34.186Z,1520561614.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:34.587Z,1520561614.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:34.981Z,1520561614.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:35.385Z,1520561615.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:35.786Z,1520561615.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:36.183Z,1520561616.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:36.586Z,1520561616.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:36.983Z,1520561616.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:37.388Z,1520561617.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:37.786Z,1520561617.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:38.184Z,1520561618.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:38.590Z,1520561618.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:38.987Z,1520561618.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:39.388Z,1520561619.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:39.787Z,1520561619.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:40.184Z,1520561620.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:40.581Z,1520561620.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:40.988Z,1520561620.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:41.375Z,1520561621.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:41.771Z,1520561621.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:42.178Z,1520561622.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:42.582Z,1520561622.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:42.972Z,1520561622.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:43.378Z,1520561623.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:43.774Z,1520561623.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:44.183Z,1520561624.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:44.578Z,1520561624.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:44.986Z,1520561624.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:45.372Z,1520561625.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:45.789Z,1520561625.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:46.188Z,1520561626.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:46.586Z,1520561626.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:46.994Z,1520561626.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:47.389Z,1520561627.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:47.783Z,1520561627.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:48.195Z,1520561628.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:48.582Z,1520561628.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:48.981Z,1520561628.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:49.381Z,1520561629.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:49.774Z,1520561629.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:50.182Z,1520561630.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:50.578Z,1520561630.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:50.979Z,1520561630.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:51.375Z,1520561631.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:51.782Z,1520561631.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:52.178Z,1520561632.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:52.578Z,1520561632.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:52.983Z,1520561632.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:53.378Z,1520561633.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:53.780Z,1520561633.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:54.191Z,1520561634.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:54.583Z,1520561634.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:54.983Z,1520561634.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:55.382Z,1520561635.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:55.790Z,1520561635.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:56.178Z,1520561636.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:56.588Z,1520561636.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:56.982Z,1520561636.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:57.382Z,1520561637.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:57.784Z,1520561637.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:58.182Z,1520561638.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:58.584Z,1520561638.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:58.980Z,1520561638.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:59.387Z,1520561639.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:13:59.771Z,1520561639.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:00.178Z,1520561640.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:00.583Z,1520561640.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:00.975Z,1520561640.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:01.378Z,1520561641.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:01.774Z,1520561641.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:02.182Z,1520561642.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:02.599Z,1520561642.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:02.978Z,1520561642.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:03.375Z,1520561643.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:03.778Z,1520561643.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:04.178Z,1520561644.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:04.575Z,1520561644.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:04.978Z,1520561644.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:05.379Z,1520561645.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:05.779Z,1520561645.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:06.191Z,1520561646.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:06.587Z,1520561646.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:06.985Z,1520561646.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:07.387Z,1520561647.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:07.785Z,1520561647.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:08.186Z,1520561648.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:08.586Z,1520561648.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:08.985Z,1520561648.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:09.383Z,1520561649.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:09.782Z,1520561649.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:10.190Z,1520561650.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:10.583Z,1520561650.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:11.006Z,1520561651.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:11.386Z,1520561651.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:11.786Z,1520561651.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:12.187Z,1520561652.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:12.589Z,1520561652.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:12.987Z,1520561652.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:13.385Z,1520561653.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:13.788Z,1520561653.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:14.188Z,1520561654.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:14.586Z,1520561654.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:14.987Z,1520561654.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:15.386Z,1520561655.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:15.781Z,1520561655.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:16.187Z,1520561656.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:16.584Z,1520561656.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:16.980Z,1520561656.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:17.390Z,1520561657.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:17.785Z,1520561657.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:18.182Z,1520561658.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:18.587Z,1520561658.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:18.985Z,1520561658.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:19.381Z,1520561659.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:19.787Z,1520561659.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:20.175Z,1520561660.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:20.578Z,1520561660.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:20.978Z,1520561660.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:21.375Z,1520561661.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:21.779Z,1520561661.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:22.178Z,1520561662.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:22.575Z,1520561662.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:22.978Z,1520561662.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:23.378Z,1520561663.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:23.775Z,1520561663.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:24.178Z,1520561664.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:24.578Z,1520561664.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:24.975Z,1520561664.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:25.378Z,1520561665.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:25.782Z,1520561665.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:25.829Z,1520561665.829 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-09T02:14:25.830Z,1520561665.830 [Default:CheckIn:C.Wait] Stopped
2018-03-09T02:14:25.830Z,1520561665.830 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-09T02:14:25.830Z,1520561665.830 [Default:CheckIn:D] Running Loop=1
2018-03-09T02:14:26.182Z,1520561666.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:26.223Z,1520561666.223 [Default:CheckIn:D] Stopped
2018-03-09T02:14:26.223Z,1520561666.223 [Default:CheckIn:E] Running Loop=1
2018-03-09T02:14:26.579Z,1520561666.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:26.628Z,1520561666.628 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1108.690234 min 
2018-03-09T02:14:26.628Z,1520561666.628 [Default:CheckIn:E] Stopped
2018-03-09T02:14:26.628Z,1520561666.628 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-09T02:14:26.628Z,1520561666.628 [Default:CheckIn] Stopped
2018-03-09T02:14:26.628Z,1520561666.628 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-09T02:14:26.628Z,1520561666.628 [Default:CheckIn](INFO): Running loop #112
2018-03-09T02:14:26.629Z,1520561666.629 [Default:CheckIn] Running Loop=112
2018-03-09T02:14:26.629Z,1520561666.629 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-09T02:14:26.629Z,1520561666.629 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-09T02:14:29.883Z,1520561669.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:29.983Z,1520561669.983 [NAL9602](INFO): Powering up
2018-03-09T02:14:29.000Z,1520561670.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:30.392Z,1520561670.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:30.786Z,1520561670.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:31.191Z,1520561671.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:31.577Z,1520561671.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:31.978Z,1520561671.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:32.376Z,1520561672.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:32.782Z,1520561672.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:33.178Z,1520561673.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:33.586Z,1520561673.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:33.985Z,1520561673.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:34.386Z,1520561674.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:34.787Z,1520561674.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:35.188Z,1520561675.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:35.578Z,1520561675.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:35.980Z,1520561675.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:36.379Z,1520561676.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:36.786Z,1520561676.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:37.193Z,1520561677.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:37.586Z,1520561677.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:37.984Z,1520561677.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:38.385Z,1520561678.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:38.785Z,1520561678.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:39.185Z,1520561679.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:39.584Z,1520561679.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:39.991Z,1520561679.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:40.386Z,1520561680.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:40.796Z,1520561680.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:41.162Z,1520561681.162 [NAL9602](INFO): NAL9602 initialized
2018-03-09T02:14:41.178Z,1520561681.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:41.578Z,1520561681.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:41.960Z,1520561681.960 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-09T02:14:41.960Z,1520561681.960 [NAL9602] Data Fault, FailCount= 1
2018-03-09T02:14:41.960Z,1520561681.960 [NAL9602](ERROR): Data Fault
2018-03-09T02:14:41.977Z,1520561681.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:42.039Z,1520561682.039 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-09T02:14:42.362Z,1520561682.362 [NAL9602](INFO): Powering down
2018-03-09T02:14:42.379Z,1520561682.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:42.789Z,1520561682.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:43.182Z,1520561683.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:43.221Z,1520561683.221 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-09T02:14:43.221Z,1520561683.221 [NAL9602] No Fault, FailCount= 1
2018-03-09T02:14:43.584Z,1520561683.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:43.978Z,1520561683.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:44.378Z,1520561684.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:44.784Z,1520561684.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:45.186Z,1520561685.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:45.575Z,1520561685.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:45.981Z,1520561685.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:46.382Z,1520561686.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:46.775Z,1520561686.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:47.186Z,1520561687.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:47.587Z,1520561687.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:47.978Z,1520561687.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:48.378Z,1520561688.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:48.778Z,1520561688.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:49.184Z,1520561689.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:49.582Z,1520561689.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:49.984Z,1520561689.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:50.382Z,1520561690.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:50.786Z,1520561690.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:51.186Z,1520561691.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:51.585Z,1520561691.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:51.987Z,1520561691.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:52.386Z,1520561692.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:52.786Z,1520561692.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:53.185Z,1520561693.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:53.587Z,1520561693.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:53.986Z,1520561693.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:54.386Z,1520561694.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:54.786Z,1520561694.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:55.187Z,1520561695.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:55.583Z,1520561695.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:55.986Z,1520561695.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:56.384Z,1520561696.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:56.785Z,1520561696.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:57.184Z,1520561697.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:57.583Z,1520561697.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:57.978Z,1520561697.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:58.377Z,1520561698.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:58.775Z,1520561698.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:59.182Z,1520561699.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:59.582Z,1520561699.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:14:59.975Z,1520561699.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:00.378Z,1520561700.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:00.787Z,1520561700.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:01.185Z,1520561701.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:01.586Z,1520561701.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:01.982Z,1520561701.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:02.387Z,1520561702.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:02.783Z,1520561702.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:03.190Z,1520561703.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:03.583Z,1520561703.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:03.986Z,1520561703.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:04.389Z,1520561704.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:04.775Z,1520561704.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:05.186Z,1520561705.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:05.582Z,1520561705.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:05.979Z,1520561705.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:06.378Z,1520561706.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:06.782Z,1520561706.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:07.178Z,1520561707.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:07.590Z,1520561707.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:07.983Z,1520561707.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:08.383Z,1520561708.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:08.783Z,1520561708.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:09.179Z,1520561709.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:09.586Z,1520561709.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:09.995Z,1520561709.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:10.388Z,1520561710.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:10.786Z,1520561710.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:11.187Z,1520561711.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:11.590Z,1520561711.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:11.985Z,1520561711.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:12.387Z,1520561712.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:12.762Z,1520561712.762 [NAL9602](INFO): Powering up NAL9602
2018-03-09T02:15:12.788Z,1520561712.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:13.190Z,1520561713.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:13.595Z,1520561713.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:13.976Z,1520561713.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:14.379Z,1520561714.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:14.779Z,1520561714.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:15.191Z,1520561715.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:15.231Z,1520561715.231 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T02:15:15.232Z,1520561715.232 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 30
2018-03-09T02:15:15.232Z,1520561715.232 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T02:15:15.253Z,1520561715.253 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T02:15:15.588Z,1520561715.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:15.641Z,1520561715.641 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T02:15:15.641Z,1520561715.641 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 30
2018-03-09T02:15:15.987Z,1520561715.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:16.004Z,1520561716.004 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T02:15:16.005Z,1520561716.005 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T02:15:16.005Z,1520561716.005 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T02:15:16.385Z,1520561716.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:16.778Z,1520561716.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:17.182Z,1520561717.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:17.579Z,1520561717.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:17.978Z,1520561717.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:18.383Z,1520561718.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:18.778Z,1520561718.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:19.184Z,1520561719.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:19.591Z,1520561719.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:19.983Z,1520561719.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:20.387Z,1520561720.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:20.790Z,1520561720.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:21.183Z,1520561721.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:21.579Z,1520561721.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:21.987Z,1520561721.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:22.386Z,1520561722.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:22.785Z,1520561722.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:23.191Z,1520561723.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:23.593Z,1520561723.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:23.974Z,1520561723.974 [NAL9602](INFO): NAL9602 initialized
2018-03-09T02:15:23.990Z,1520561723.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:24.390Z,1520561724.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:24.789Z,1520561724.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:25.201Z,1520561725.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:25.601Z,1520561725.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:25.986Z,1520561725.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:26.394Z,1520561726.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:26.793Z,1520561726.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:27.202Z,1520561727.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:27.601Z,1520561727.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:28.013Z,1520561728.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:31.307Z,1520561731.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:31.421Z,1520561731.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:31.813Z,1520561731.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:32.204Z,1520561732.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:32.614Z,1520561732.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:33.009Z,1520561733.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:33.382Z,1520561733.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:33.787Z,1520561733.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:34.191Z,1520561734.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:34.586Z,1520561734.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:34.990Z,1520561734.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:35.386Z,1520561735.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:35.788Z,1520561735.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:36.195Z,1520561736.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:36.596Z,1520561736.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:37.005Z,1520561737.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:37.409Z,1520561737.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:37.800Z,1520561737.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:38.202Z,1520561738.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:38.591Z,1520561738.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:38.989Z,1520561738.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:39.399Z,1520561739.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:39.786Z,1520561739.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:40.202Z,1520561740.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:40.582Z,1520561740.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:40.982Z,1520561740.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:41.386Z,1520561741.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:41.782Z,1520561741.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:42.206Z,1520561742.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:42.612Z,1520561742.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:43.006Z,1520561743.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:43.401Z,1520561743.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:43.806Z,1520561743.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:44.182Z,1520561744.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:44.582Z,1520561744.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:44.986Z,1520561744.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:45.387Z,1520561745.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:45.790Z,1520561745.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:46.186Z,1520561746.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:46.587Z,1520561746.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:46.991Z,1520561746.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:47.404Z,1520561747.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:47.807Z,1520561747.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:48.208Z,1520561748.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:48.604Z,1520561748.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:48.986Z,1520561748.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:49.386Z,1520561749.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:49.786Z,1520561749.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:50.187Z,1520561750.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:50.606Z,1520561750.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:50.986Z,1520561750.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:51.386Z,1520561751.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:51.790Z,1520561751.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:52.186Z,1520561752.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:52.606Z,1520561752.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:53.010Z,1520561753.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:53.405Z,1520561753.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:53.802Z,1520561753.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:54.187Z,1520561754.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:54.586Z,1520561754.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:54.987Z,1520561754.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:55.390Z,1520561755.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:55.806Z,1520561755.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:56.187Z,1520561756.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:56.590Z,1520561756.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:57.007Z,1520561757.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:57.386Z,1520561757.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:57.810Z,1520561757.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:58.217Z,1520561758.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:58.605Z,1520561758.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:59.005Z,1520561759.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:59.386Z,1520561759.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:15:59.791Z,1520561759.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:00.191Z,1520561760.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:00.586Z,1520561760.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:00.987Z,1520561760.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:01.394Z,1520561761.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:01.801Z,1520561761.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:02.191Z,1520561762.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:02.606Z,1520561762.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:03.019Z,1520561763.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:03.405Z,1520561763.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:03.805Z,1520561763.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:04.220Z,1520561764.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:04.591Z,1520561764.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:04.988Z,1520561764.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:05.394Z,1520561765.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:05.792Z,1520561765.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:06.190Z,1520561766.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:06.594Z,1520561766.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:06.994Z,1520561766.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:07.393Z,1520561767.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:07.789Z,1520561767.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:08.206Z,1520561768.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:08.607Z,1520561768.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:09.003Z,1520561769.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:09.407Z,1520561769.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:09.786Z,1520561769.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:10.191Z,1520561770.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:10.608Z,1520561770.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:10.985Z,1520561770.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:11.388Z,1520561771.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:11.792Z,1520561771.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:12.188Z,1520561772.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:12.595Z,1520561772.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:12.995Z,1520561772.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:13.402Z,1520561773.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:13.816Z,1520561773.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:14.211Z,1520561774.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:14.601Z,1520561774.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:14.993Z,1520561774.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:15.414Z,1520561775.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:15.787Z,1520561775.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:16.195Z,1520561776.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:16.593Z,1520561776.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:16.983Z,1520561776.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:17.391Z,1520561777.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:17.795Z,1520561777.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:18.195Z,1520561778.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:18.613Z,1520561778.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:18.997Z,1520561778.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:19.395Z,1520561779.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:19.804Z,1520561779.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:20.199Z,1520561780.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:20.584Z,1520561780.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:20.993Z,1520561780.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:21.382Z,1520561781.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:21.780Z,1520561781.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:22.207Z,1520561782.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:22.599Z,1520561782.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:22.987Z,1520561782.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:23.407Z,1520561783.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:23.811Z,1520561783.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:24.207Z,1520561784.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:24.617Z,1520561784.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:24.996Z,1520561784.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:25.385Z,1520561785.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:25.791Z,1520561785.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:26.182Z,1520561786.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:26.581Z,1520561786.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:26.986Z,1520561786.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:30.278Z,1520561790.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:30.401Z,1520561790.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:30.789Z,1520561790.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:31.189Z,1520561791.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:31.584Z,1520561791.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:31.973Z,1520561791.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:32.380Z,1520561792.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:32.768Z,1520561792.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:33.170Z,1520561793.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:33.570Z,1520561793.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:33.970Z,1520561793.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:34.383Z,1520561794.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:34.770Z,1520561794.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:35.190Z,1520561795.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:35.585Z,1520561795.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:35.986Z,1520561795.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:36.381Z,1520561796.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:36.783Z,1520561796.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:37.176Z,1520561797.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:37.572Z,1520561797.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:37.975Z,1520561797.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:38.378Z,1520561798.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:38.773Z,1520561798.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:39.173Z,1520561799.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:39.580Z,1520561799.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:39.966Z,1520561799.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:40.388Z,1520561800.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:40.777Z,1520561800.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:41.192Z,1520561801.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:41.594Z,1520561801.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:41.971Z,1520561801.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:42.375Z,1520561802.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:42.771Z,1520561802.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:43.176Z,1520561803.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:43.577Z,1520561803.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:43.979Z,1520561803.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:44.376Z,1520561804.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:44.778Z,1520561804.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:45.189Z,1520561805.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:45.589Z,1520561805.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:45.986Z,1520561805.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:46.392Z,1520561806.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:46.794Z,1520561806.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:47.166Z,1520561807.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:47.570Z,1520561807.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:47.967Z,1520561807.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:48.366Z,1520561808.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:48.770Z,1520561808.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:49.170Z,1520561809.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:49.575Z,1520561809.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:49.977Z,1520561809.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:50.379Z,1520561810.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:50.785Z,1520561810.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:51.189Z,1520561811.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:51.585Z,1520561811.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:51.985Z,1520561811.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:52.375Z,1520561812.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:52.780Z,1520561812.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:53.175Z,1520561813.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:53.579Z,1520561813.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:53.977Z,1520561813.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:54.375Z,1520561814.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:54.788Z,1520561814.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:55.181Z,1520561815.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:55.564Z,1520561815.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:55.995Z,1520561815.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:56.381Z,1520561816.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:56.781Z,1520561816.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:57.207Z,1520561817.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:57.571Z,1520561817.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:57.971Z,1520561817.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:58.380Z,1520561818.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:58.778Z,1520561818.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:59.178Z,1520561819.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:59.578Z,1520561819.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:16:59.979Z,1520561819.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:00.378Z,1520561820.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:00.773Z,1520561820.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:01.193Z,1520561821.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:01.581Z,1520561821.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:01.994Z,1520561821.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:02.393Z,1520561822.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:02.768Z,1520561822.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:03.170Z,1520561823.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:03.574Z,1520561823.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:03.979Z,1520561823.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:04.385Z,1520561824.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:04.780Z,1520561824.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:05.185Z,1520561825.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:05.578Z,1520561825.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:05.979Z,1520561825.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:06.390Z,1520561826.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:06.790Z,1520561826.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:07.193Z,1520561827.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:07.585Z,1520561827.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:07.975Z,1520561827.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:08.375Z,1520561828.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:08.773Z,1520561828.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:09.177Z,1520561829.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:09.577Z,1520561829.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:09.978Z,1520561829.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:10.378Z,1520561830.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:10.779Z,1520561830.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:11.184Z,1520561831.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:11.593Z,1520561831.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:11.981Z,1520561831.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:12.388Z,1520561832.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:12.785Z,1520561832.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:13.178Z,1520561833.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:13.575Z,1520561833.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:13.980Z,1520561833.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:14.383Z,1520561834.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:14.773Z,1520561834.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:15.177Z,1520561835.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:15.579Z,1520561835.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:15.974Z,1520561835.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:16.373Z,1520561836.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:16.789Z,1520561836.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:17.192Z,1520561837.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:17.581Z,1520561837.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:18.005Z,1520561838.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:18.374Z,1520561838.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:18.780Z,1520561838.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:19.179Z,1520561839.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:19.573Z,1520561839.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:19.977Z,1520561839.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:20.383Z,1520561840.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:20.777Z,1520561840.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:21.187Z,1520561841.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:21.570Z,1520561841.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:21.993Z,1520561841.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:22.385Z,1520561842.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:22.796Z,1520561842.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:23.182Z,1520561843.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:23.587Z,1520561843.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:23.983Z,1520561843.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:24.377Z,1520561844.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:24.786Z,1520561844.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:25.180Z,1520561845.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:25.573Z,1520561845.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:25.987Z,1520561845.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:26.379Z,1520561846.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:26.773Z,1520561846.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:27.193Z,1520561847.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:30.377Z,1520561850.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:30.514Z,1520561850.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:30.906Z,1520561850.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:31.268Z,1520561851.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:31.660Z,1520561851.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:32.067Z,1520561852.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:32.462Z,1520561852.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:32.848Z,1520561852.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:33.255Z,1520561853.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:33.660Z,1520561853.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:34.047Z,1520561854.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:34.454Z,1520561854.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:34.875Z,1520561854.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:35.287Z,1520561855.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:35.684Z,1520561855.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:36.082Z,1520561856.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:36.456Z,1520561856.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:36.861Z,1520561856.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:37.259Z,1520561857.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:37.654Z,1520561857.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:38.063Z,1520561858.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:38.484Z,1520561858.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:38.850Z,1520561858.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:39.267Z,1520561859.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:39.651Z,1520561859.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:40.065Z,1520561860.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:40.465Z,1520561860.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:40.896Z,1520561860.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:41.297Z,1520561861.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:41.661Z,1520561861.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:42.058Z,1520561862.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:42.459Z,1520561862.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:42.856Z,1520561862.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:43.265Z,1520561863.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:43.663Z,1520561863.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:44.067Z,1520561864.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:44.460Z,1520561864.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:44.862Z,1520561864.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:45.270Z,1520561865.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:45.696Z,1520561865.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:46.112Z,1520561866.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:46.486Z,1520561866.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:46.861Z,1520561866.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:47.264Z,1520561867.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:47.650Z,1520561867.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:48.067Z,1520561868.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:48.455Z,1520561868.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:48.851Z,1520561868.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:49.251Z,1520561869.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:49.648Z,1520561869.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:50.056Z,1520561870.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:50.475Z,1520561870.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:50.865Z,1520561870.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:51.281Z,1520561871.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:51.685Z,1520561871.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:52.063Z,1520561872.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:52.462Z,1520561872.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:52.858Z,1520561872.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:53.254Z,1520561873.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:53.662Z,1520561873.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:54.061Z,1520561874.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:54.448Z,1520561874.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:54.864Z,1520561874.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:55.264Z,1520561875.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:55.700Z,1520561875.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:56.084Z,1520561876.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:56.501Z,1520561876.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:56.888Z,1520561876.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:57.259Z,1520561877.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:57.661Z,1520561877.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:58.058Z,1520561878.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:58.462Z,1520561878.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:58.863Z,1520561878.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:59.261Z,1520561879.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:17:59.661Z,1520561879.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:00.058Z,1520561880.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:00.451Z,1520561880.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:00.906Z,1520561880.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:01.281Z,1520561881.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:01.678Z,1520561881.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:02.086Z,1520561882.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:02.449Z,1520561882.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:02.855Z,1520561882.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:03.254Z,1520561883.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:03.650Z,1520561883.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:04.058Z,1520561884.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:04.453Z,1520561884.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:04.858Z,1520561884.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:05.259Z,1520561885.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:05.658Z,1520561885.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:06.065Z,1520561886.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:06.481Z,1520561886.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:06.871Z,1520561886.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:07.271Z,1520561887.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:07.659Z,1520561887.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:08.056Z,1520561888.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:08.461Z,1520561888.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:08.865Z,1520561888.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:09.258Z,1520561889.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:09.659Z,1520561889.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:10.059Z,1520561890.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:10.466Z,1520561890.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:10.859Z,1520561890.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:11.286Z,1520561891.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:11.692Z,1520561891.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:12.079Z,1520561892.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:12.482Z,1520561892.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:12.861Z,1520561892.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:13.255Z,1520561893.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:13.666Z,1520561893.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:14.053Z,1520561894.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:14.450Z,1520561894.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:14.855Z,1520561894.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:15.253Z,1520561895.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:15.650Z,1520561895.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:16.055Z,1520561896.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:16.134Z,1520561896.134 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T02:18:16.134Z,1520561896.134 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 31
2018-03-09T02:18:16.134Z,1520561896.134 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T02:18:16.159Z,1520561896.159 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T02:18:16.461Z,1520561896.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:16.552Z,1520561896.552 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T02:18:16.552Z,1520561896.552 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 31
2018-03-09T02:18:16.882Z,1520561896.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:16.899Z,1520561896.899 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T02:18:16.899Z,1520561896.899 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T02:18:16.900Z,1520561896.900 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T02:18:17.286Z,1520561897.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:17.704Z,1520561897.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:18.058Z,1520561898.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:18.461Z,1520561898.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:18.859Z,1520561898.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:19.259Z,1520561899.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:19.657Z,1520561899.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:20.062Z,1520561900.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:20.462Z,1520561900.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:20.865Z,1520561900.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:21.253Z,1520561901.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:21.673Z,1520561901.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:22.075Z,1520561902.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:22.478Z,1520561902.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:22.903Z,1520561902.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:23.253Z,1520561903.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:23.652Z,1520561903.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:24.050Z,1520561904.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:24.454Z,1520561904.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:24.853Z,1520561904.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:25.258Z,1520561905.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:25.659Z,1520561905.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:26.060Z,1520561906.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:26.461Z,1520561906.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:26.889Z,1520561906.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:27.294Z,1520561907.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:30.409Z,1520561910.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:30.567Z,1520561910.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:30.955Z,1520561910.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:31.334Z,1520561911.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:31.763Z,1520561911.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:32.165Z,1520561912.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:32.559Z,1520561912.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:32.958Z,1520561912.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:33.358Z,1520561913.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:33.740Z,1520561913.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:34.137Z,1520561914.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:34.542Z,1520561914.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:34.934Z,1520561914.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:35.343Z,1520561915.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:35.739Z,1520561915.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:36.142Z,1520561916.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:36.532Z,1520561916.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:36.940Z,1520561916.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:37.357Z,1520561917.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:37.749Z,1520561917.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:38.156Z,1520561918.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:38.557Z,1520561918.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:38.939Z,1520561918.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:39.350Z,1520561919.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:39.746Z,1520561919.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:40.135Z,1520561920.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:40.548Z,1520561920.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:40.943Z,1520561920.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:41.338Z,1520561921.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:41.747Z,1520561921.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:42.147Z,1520561922.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:42.550Z,1520561922.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:42.957Z,1520561922.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:43.362Z,1520561923.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:43.753Z,1520561923.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:44.139Z,1520561924.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:44.534Z,1520561924.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:44.935Z,1520561924.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:45.339Z,1520561925.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:45.738Z,1520561925.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:46.133Z,1520561926.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:46.559Z,1520561926.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:46.938Z,1520561926.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:47.342Z,1520561927.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:47.757Z,1520561927.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:48.162Z,1520561928.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:48.532Z,1520561928.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:48.942Z,1520561928.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:49.338Z,1520561929.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:49.736Z,1520561929.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:50.139Z,1520561930.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:50.538Z,1520561930.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:50.955Z,1520561930.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:51.344Z,1520561931.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:51.738Z,1520561931.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:52.139Z,1520561932.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:52.550Z,1520561932.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:52.948Z,1520561932.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:53.346Z,1520561933.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:53.746Z,1520561933.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:54.148Z,1520561934.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:54.544Z,1520561934.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:54.948Z,1520561934.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:55.347Z,1520561935.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:55.743Z,1520561935.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:56.150Z,1520561936.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:56.547Z,1520561936.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:56.954Z,1520561936.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:57.356Z,1520561937.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:57.734Z,1520561937.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:58.136Z,1520561938.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:58.547Z,1520561938.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:58.934Z,1520561938.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:59.352Z,1520561939.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:18:59.759Z,1520561939.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:00.160Z,1520561940.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:00.532Z,1520561940.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:00.938Z,1520561940.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:01.334Z,1520561941.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:01.737Z,1520561941.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:02.142Z,1520561942.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:02.534Z,1520561942.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:02.936Z,1520561942.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:03.338Z,1520561943.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:03.746Z,1520561943.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:04.135Z,1520561944.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:04.544Z,1520561944.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:04.947Z,1520561944.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:05.343Z,1520561945.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:05.766Z,1520561945.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:06.152Z,1520561946.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:06.537Z,1520561946.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:06.938Z,1520561946.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:07.338Z,1520561947.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:07.736Z,1520561947.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:08.138Z,1520561948.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:08.534Z,1520561948.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:08.936Z,1520561948.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:09.342Z,1520561949.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:09.762Z,1520561949.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:10.153Z,1520561950.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:10.543Z,1520561950.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:10.935Z,1520561950.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:11.335Z,1520561951.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:11.743Z,1520561951.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:12.138Z,1520561952.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:12.536Z,1520561952.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:12.938Z,1520561952.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:13.339Z,1520561953.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:13.736Z,1520561953.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:14.157Z,1520561954.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:14.551Z,1520561954.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:14.942Z,1520561954.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:15.348Z,1520561955.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:15.747Z,1520561955.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:16.143Z,1520561956.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:16.545Z,1520561956.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:16.945Z,1520561956.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:17.346Z,1520561957.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:17.741Z,1520561957.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:18.155Z,1520561958.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:18.556Z,1520561958.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:18.947Z,1520561958.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:19.338Z,1520561959.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:19.736Z,1520561959.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:20.159Z,1520561960.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:20.538Z,1520561960.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:20.939Z,1520561960.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:21.338Z,1520561961.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:21.738Z,1520561961.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:22.136Z,1520561962.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:22.538Z,1520561962.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:22.939Z,1520561962.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:23.342Z,1520561963.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:23.737Z,1520561963.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:24.142Z,1520561964.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:24.536Z,1520561964.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:24.939Z,1520561964.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:25.342Z,1520561965.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:25.737Z,1520561965.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:26.138Z,1520561966.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:26.542Z,1520561966.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:26.963Z,1520561966.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:26.989Z,1520561966.989 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-09T02:14:26.6Z
2018-03-09T02:19:26.989Z,1520561966.989 [Default:CheckIn:Read_GPS] Stopped
2018-03-09T02:19:26.989Z,1520561966.989 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-09T02:19:27.349Z,1520561967.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:30.614Z,1520561970.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:30.734Z,1520561970.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:31.061Z,1520561971.061 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0448.lzma
2018-03-09T02:19:31.109Z,1520561971.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:31.493Z,1520561971.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:31.860Z,1520561971.860 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0448.lzma.bak
2018-03-09T02:19:31.860Z,1520561971.860 [DataOverHttps](INFO): SBD MOMSN=7991387
2018-03-09T02:19:31.891Z,1520561971.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:32.517Z,1520561972.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:32.678Z,1520561972.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:35.915Z,1520561975.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:36.029Z,1520561976.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:36.415Z,1520561976.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:36.814Z,1520561976.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:37.206Z,1520561977.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:37.612Z,1520561977.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:37.994Z,1520561977.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:41.363Z,1520561981.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:41.486Z,1520561981.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:41.809Z,1520561981.809 [DataOverHttps](INFO): Sending 216 bytes from file Logs/20180308T074127/Express0449.lzma
2018-03-09T02:19:41.840Z,1520561981.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:42.241Z,1520561982.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:42.611Z,1520561982.611 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0449.lzma.bak
2018-03-09T02:19:42.611Z,1520561982.611 [DataOverHttps](INFO): SBD MOMSN=7991389
2018-03-09T02:19:42.633Z,1520561982.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:43.228Z,1520561983.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:43.253Z,1520561983.253 [Default:CheckIn:Read_Iridium] Stopped
2018-03-09T02:19:43.253Z,1520561983.253 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-09T02:19:43.254Z,1520561983.254 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-09T02:19:43.435Z,1520561983.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:43.834Z,1520561983.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:47.153Z,1520561987.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:47.301Z,1520561987.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:47.643Z,1520561987.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:48.040Z,1520561988.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:48.454Z,1520561988.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:48.853Z,1520561988.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:49.236Z,1520561989.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:49.652Z,1520561989.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:50.048Z,1520561990.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:50.433Z,1520561990.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:50.845Z,1520561990.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:51.251Z,1520561991.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:51.632Z,1520561991.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:52.050Z,1520561992.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:52.436Z,1520561992.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:52.852Z,1520561992.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:53.251Z,1520561993.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:53.685Z,1520561993.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:54.049Z,1520561994.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:54.441Z,1520561994.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:54.847Z,1520561994.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:55.248Z,1520561995.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:55.643Z,1520561995.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:56.043Z,1520561996.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:56.433Z,1520561996.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:56.849Z,1520561996.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:57.236Z,1520561997.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:57.631Z,1520561997.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:58.062Z,1520561998.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:58.450Z,1520561998.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:58.853Z,1520561998.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:59.261Z,1520561999.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:19:59.637Z,1520561999.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:00.034Z,1520562000.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:00.436Z,1520562000.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:00.852Z,1520562000.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:01.241Z,1520562001.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:01.642Z,1520562001.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:02.036Z,1520562002.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:02.430Z,1520562002.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:02.840Z,1520562002.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:03.245Z,1520562003.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:03.658Z,1520562003.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:04.062Z,1520562004.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:04.467Z,1520562004.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:04.845Z,1520562004.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:05.239Z,1520562005.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:05.640Z,1520562005.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:06.046Z,1520562006.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:06.444Z,1520562006.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:06.843Z,1520562006.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:07.230Z,1520562007.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:07.640Z,1520562007.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:08.037Z,1520562008.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:08.453Z,1520562008.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:08.855Z,1520562008.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:09.251Z,1520562009.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:09.649Z,1520562009.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:10.044Z,1520562010.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:10.443Z,1520562010.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:10.832Z,1520562010.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:11.250Z,1520562011.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:11.636Z,1520562011.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:12.030Z,1520562012.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:12.441Z,1520562012.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:12.837Z,1520562012.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:13.233Z,1520562013.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:13.665Z,1520562013.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:14.059Z,1520562014.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:14.459Z,1520562014.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:14.858Z,1520562014.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:15.259Z,1520562015.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:15.645Z,1520562015.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:16.039Z,1520562016.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:16.447Z,1520562016.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:16.842Z,1520562016.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:17.232Z,1520562017.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:17.645Z,1520562017.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:18.042Z,1520562018.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:18.464Z,1520562018.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:18.867Z,1520562018.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:19.246Z,1520562019.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:19.638Z,1520562019.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:20.038Z,1520562020.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:20.454Z,1520562020.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:20.849Z,1520562020.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:21.251Z,1520562021.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:21.641Z,1520562021.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:22.045Z,1520562022.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:22.455Z,1520562022.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:22.863Z,1520562022.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:23.238Z,1520562023.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:23.637Z,1520562023.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:24.047Z,1520562024.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:24.438Z,1520562024.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:24.833Z,1520562024.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:25.241Z,1520562025.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:25.630Z,1520562025.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:26.043Z,1520562026.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:26.438Z,1520562026.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:26.834Z,1520562026.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:27.227Z,1520562027.227 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-09T02:20:27.245Z,1520562027.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:27.644Z,1520562027.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:28.039Z,1520562028.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:28.445Z,1520562028.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:28.843Z,1520562028.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:29.242Z,1520562029.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:29.637Z,1520562029.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:30.037Z,1520562030.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:30.441Z,1520562030.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:30.836Z,1520562030.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:31.240Z,1520562031.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:31.633Z,1520562031.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:32.044Z,1520562032.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:32.440Z,1520562032.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:32.831Z,1520562032.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:33.238Z,1520562033.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:33.645Z,1520562033.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:34.043Z,1520562034.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:34.449Z,1520562034.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:34.843Z,1520562034.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:35.246Z,1520562035.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:35.635Z,1520562035.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:36.038Z,1520562036.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:36.450Z,1520562036.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:36.836Z,1520562036.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:37.235Z,1520562037.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:37.638Z,1520562037.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:38.045Z,1520562038.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:38.447Z,1520562038.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:38.840Z,1520562038.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:39.254Z,1520562039.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:39.631Z,1520562039.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:40.034Z,1520562040.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:40.443Z,1520562040.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:40.834Z,1520562040.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:41.245Z,1520562041.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:41.644Z,1520562041.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:42.040Z,1520562042.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:42.444Z,1520562042.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:42.842Z,1520562042.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:43.248Z,1520562043.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:43.657Z,1520562043.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:47.217Z,1520562047.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:47.349Z,1520562047.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:47.754Z,1520562047.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:48.155Z,1520562048.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:48.554Z,1520562048.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:48.952Z,1520562048.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:49.353Z,1520562049.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:49.751Z,1520562049.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:50.153Z,1520562050.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:50.554Z,1520562050.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:50.950Z,1520562050.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:51.352Z,1520562051.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:51.749Z,1520562051.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:52.150Z,1520562052.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:52.548Z,1520562052.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:52.941Z,1520562052.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:53.359Z,1520562053.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:53.749Z,1520562053.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:54.158Z,1520562054.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:54.543Z,1520562054.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:54.946Z,1520562054.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:55.342Z,1520562055.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:55.743Z,1520562055.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:56.146Z,1520562056.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:56.542Z,1520562056.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:56.940Z,1520562056.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:57.346Z,1520562057.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:57.735Z,1520562057.735 [NAL9602](INFO): Powering down
2018-03-09T02:20:57.753Z,1520562057.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:58.144Z,1520562058.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:58.546Z,1520562058.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:58.946Z,1520562058.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:59.346Z,1520562059.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:20:59.758Z,1520562059.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:00.155Z,1520562060.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:00.547Z,1520562060.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:00.954Z,1520562060.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:01.347Z,1520562061.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:01.740Z,1520562061.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:02.155Z,1520562062.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:02.558Z,1520562062.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:02.953Z,1520562062.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:03.352Z,1520562063.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:03.750Z,1520562063.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:04.151Z,1520562064.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:04.555Z,1520562064.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:04.958Z,1520562064.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:05.355Z,1520562065.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:05.764Z,1520562065.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:06.155Z,1520562066.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:06.547Z,1520562066.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:06.947Z,1520562066.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:07.347Z,1520562067.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:07.746Z,1520562067.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:08.159Z,1520562068.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:08.553Z,1520562068.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:08.951Z,1520562068.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:09.353Z,1520562069.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:09.755Z,1520562069.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:10.151Z,1520562070.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:10.554Z,1520562070.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:10.953Z,1520562070.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:11.349Z,1520562071.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:11.754Z,1520562071.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:12.150Z,1520562072.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:12.555Z,1520562072.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:12.954Z,1520562072.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:13.354Z,1520562073.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:13.754Z,1520562073.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:14.155Z,1520562074.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:14.558Z,1520562074.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:14.943Z,1520562074.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:15.354Z,1520562075.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:15.758Z,1520562075.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:16.144Z,1520562076.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:16.559Z,1520562076.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:16.958Z,1520562076.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:16.976Z,1520562076.976 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T02:21:16.976Z,1520562076.976 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 32
2018-03-09T02:21:16.976Z,1520562076.976 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T02:21:16.989Z,1520562076.989 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T02:21:17.353Z,1520562077.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:17.387Z,1520562077.387 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T02:21:17.387Z,1520562077.387 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 32
2018-03-09T02:21:17.755Z,1520562077.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:17.777Z,1520562077.777 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T02:21:17.777Z,1520562077.777 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T02:21:17.778Z,1520562077.778 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T02:21:18.142Z,1520562078.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:18.543Z,1520562078.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:18.942Z,1520562078.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:19.343Z,1520562079.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:19.743Z,1520562079.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:20.146Z,1520562080.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:20.542Z,1520562080.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:20.943Z,1520562080.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:21.358Z,1520562081.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:21.750Z,1520562081.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:22.147Z,1520562082.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:22.548Z,1520562082.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:22.955Z,1520562082.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:23.353Z,1520562083.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:23.751Z,1520562083.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:24.151Z,1520562084.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:24.552Z,1520562084.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:24.954Z,1520562084.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:25.355Z,1520562085.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:25.750Z,1520562085.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:26.154Z,1520562086.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:26.554Z,1520562086.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:26.952Z,1520562086.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:27.354Z,1520562087.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:27.754Z,1520562087.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:28.152Z,1520562088.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:28.553Z,1520562088.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:28.954Z,1520562088.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:29.358Z,1520562089.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:29.754Z,1520562089.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:30.154Z,1520562090.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:30.551Z,1520562090.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:30.954Z,1520562090.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:31.354Z,1520562091.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:31.749Z,1520562091.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:32.154Z,1520562092.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:32.555Z,1520562092.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:32.944Z,1520562092.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:33.350Z,1520562093.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:33.746Z,1520562093.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:34.146Z,1520562094.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:34.546Z,1520562094.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:34.947Z,1520562094.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:35.342Z,1520562095.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:35.746Z,1520562095.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:36.150Z,1520562096.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:36.542Z,1520562096.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:36.942Z,1520562096.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:37.350Z,1520562097.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:37.747Z,1520562097.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:38.150Z,1520562098.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:38.554Z,1520562098.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:38.946Z,1520562098.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:39.345Z,1520562099.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:39.744Z,1520562099.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:40.150Z,1520562100.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:40.554Z,1520562100.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:40.948Z,1520562100.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:41.354Z,1520562101.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:41.756Z,1520562101.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:42.152Z,1520562102.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:42.556Z,1520562102.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:42.954Z,1520562102.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:43.354Z,1520562103.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:43.754Z,1520562103.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:47.066Z,1520562107.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:47.182Z,1520562107.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:47.564Z,1520562107.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:47.959Z,1520562107.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:48.364Z,1520562108.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:48.761Z,1520562108.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:49.162Z,1520562109.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:49.566Z,1520562109.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:49.957Z,1520562109.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:50.351Z,1520562110.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:50.757Z,1520562110.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:51.154Z,1520562111.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:51.551Z,1520562111.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:51.954Z,1520562111.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:52.371Z,1520562112.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:52.758Z,1520562112.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:53.160Z,1520562113.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:53.563Z,1520562113.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:53.959Z,1520562113.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:54.358Z,1520562114.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:54.762Z,1520562114.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:55.163Z,1520562115.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:55.566Z,1520562115.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:55.960Z,1520562115.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:56.366Z,1520562116.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:56.762Z,1520562116.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:57.156Z,1520562117.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:57.566Z,1520562117.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:57.966Z,1520562117.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:58.357Z,1520562118.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:58.767Z,1520562118.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:59.176Z,1520562119.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:59.554Z,1520562119.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:21:59.954Z,1520562119.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:00.355Z,1520562120.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:00.755Z,1520562120.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:01.155Z,1520562121.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:01.555Z,1520562121.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:01.956Z,1520562121.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:02.360Z,1520562122.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:02.755Z,1520562122.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:03.159Z,1520562123.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:03.566Z,1520562123.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:03.955Z,1520562123.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:04.362Z,1520562124.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:04.762Z,1520562124.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:05.162Z,1520562125.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:05.561Z,1520562125.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:05.962Z,1520562125.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:06.362Z,1520562126.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:06.771Z,1520562126.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:07.162Z,1520562127.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:07.551Z,1520562127.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:07.954Z,1520562127.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:08.354Z,1520562128.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:08.403Z,1520562128.403 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-09T02:22:08.752Z,1520562128.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:09.154Z,1520562129.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:09.550Z,1520562129.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:09.951Z,1520562129.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:10.354Z,1520562130.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:10.754Z,1520562130.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:11.157Z,1520562131.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:11.555Z,1520562131.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:11.959Z,1520562131.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:12.362Z,1520562132.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:12.763Z,1520562132.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:13.161Z,1520562133.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:13.563Z,1520562133.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:13.962Z,1520562133.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:14.362Z,1520562134.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:14.759Z,1520562134.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:15.162Z,1520562135.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:15.567Z,1520562135.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:15.960Z,1520562135.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:16.370Z,1520562136.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:16.758Z,1520562136.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:17.160Z,1520562137.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:17.571Z,1520562137.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:17.967Z,1520562137.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:18.363Z,1520562138.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:18.757Z,1520562138.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:19.167Z,1520562139.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:19.554Z,1520562139.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:19.954Z,1520562139.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:20.354Z,1520562140.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:20.750Z,1520562140.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:21.175Z,1520562141.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:21.554Z,1520562141.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:21.954Z,1520562141.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:22.354Z,1520562142.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:22.754Z,1520562142.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:23.152Z,1520562143.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:23.554Z,1520562143.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:23.950Z,1520562143.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:24.358Z,1520562144.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:24.754Z,1520562144.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:25.150Z,1520562145.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:25.550Z,1520562145.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:25.958Z,1520562145.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:26.354Z,1520562146.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:26.751Z,1520562146.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:27.154Z,1520562147.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:27.560Z,1520562147.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:27.952Z,1520562147.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:28.359Z,1520562148.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:28.766Z,1520562148.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:29.158Z,1520562149.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:29.569Z,1520562149.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:29.961Z,1520562149.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:30.365Z,1520562150.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:30.762Z,1520562150.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:31.166Z,1520562151.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:31.559Z,1520562151.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:31.956Z,1520562151.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:32.362Z,1520562152.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:32.763Z,1520562152.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:33.163Z,1520562153.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:33.554Z,1520562153.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:33.954Z,1520562153.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:34.374Z,1520562154.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:34.755Z,1520562154.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:35.150Z,1520562155.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:35.574Z,1520562155.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:35.950Z,1520562155.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:36.350Z,1520562156.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:36.757Z,1520562156.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:37.162Z,1520562157.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:37.557Z,1520562157.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:37.956Z,1520562157.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:38.360Z,1520562158.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:38.755Z,1520562158.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:39.162Z,1520562159.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:39.562Z,1520562159.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:39.963Z,1520562159.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:40.363Z,1520562160.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:40.761Z,1520562160.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:41.163Z,1520562161.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:41.560Z,1520562161.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:41.962Z,1520562161.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:42.363Z,1520562162.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:42.762Z,1520562162.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:43.161Z,1520562163.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:43.552Z,1520562163.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:43.962Z,1520562163.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:47.139Z,1520562167.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:47.263Z,1520562167.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:47.643Z,1520562167.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:48.030Z,1520562168.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:48.440Z,1520562168.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:48.830Z,1520562168.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:49.237Z,1520562169.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:49.619Z,1520562169.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:50.030Z,1520562170.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:50.427Z,1520562170.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:50.823Z,1520562170.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:51.228Z,1520562171.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:51.637Z,1520562171.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:52.018Z,1520562172.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:52.422Z,1520562172.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:52.818Z,1520562172.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:53.228Z,1520562173.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:53.622Z,1520562173.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:54.018Z,1520562174.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:54.419Z,1520562174.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:54.823Z,1520562174.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:55.230Z,1520562175.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:55.626Z,1520562175.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:56.033Z,1520562176.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:56.433Z,1520562176.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:56.823Z,1520562176.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:57.228Z,1520562177.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:57.632Z,1520562177.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:58.022Z,1520562178.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:58.427Z,1520562178.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:58.830Z,1520562178.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:59.229Z,1520562179.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:22:59.631Z,1520562179.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:00.028Z,1520562180.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:00.427Z,1520562180.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:00.837Z,1520562180.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:01.239Z,1520562181.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:01.618Z,1520562181.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:02.022Z,1520562182.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:02.423Z,1520562182.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:02.822Z,1520562182.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:03.231Z,1520562183.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:03.627Z,1520562183.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:04.031Z,1520562184.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:04.425Z,1520562184.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:04.826Z,1520562184.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:05.218Z,1520562185.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:05.623Z,1520562185.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:06.026Z,1520562186.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:06.426Z,1520562186.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:06.823Z,1520562186.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:07.233Z,1520562187.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:07.625Z,1520562187.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:08.034Z,1520562188.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:08.429Z,1520562188.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:08.824Z,1520562188.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:09.233Z,1520562189.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:09.625Z,1520562189.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:10.018Z,1520562190.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:10.423Z,1520562190.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:10.829Z,1520562190.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:11.217Z,1520562191.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:11.640Z,1520562191.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:12.023Z,1520562192.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:12.438Z,1520562192.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:12.822Z,1520562192.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:13.226Z,1520562193.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:13.616Z,1520562193.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:14.038Z,1520562194.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:14.424Z,1520562194.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:14.816Z,1520562194.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:15.223Z,1520562195.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:15.624Z,1520562195.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:16.019Z,1520562196.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:16.432Z,1520562196.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:16.829Z,1520562196.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:17.231Z,1520562197.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:17.631Z,1520562197.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:18.032Z,1520562198.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:18.434Z,1520562198.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:18.837Z,1520562198.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:19.229Z,1520562199.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:19.626Z,1520562199.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:20.028Z,1520562200.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:20.424Z,1520562200.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:20.818Z,1520562200.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:21.226Z,1520562201.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:21.628Z,1520562201.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:22.021Z,1520562202.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:22.444Z,1520562202.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:22.826Z,1520562202.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:23.224Z,1520562203.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:23.632Z,1520562203.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:24.022Z,1520562204.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:24.427Z,1520562204.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:24.837Z,1520562204.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:25.232Z,1520562205.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:25.626Z,1520562205.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:26.031Z,1520562206.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:26.425Z,1520562206.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:26.830Z,1520562206.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:27.229Z,1520562207.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:27.623Z,1520562207.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:28.035Z,1520562208.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:28.435Z,1520562208.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:28.826Z,1520562208.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:29.230Z,1520562209.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:29.634Z,1520562209.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:30.033Z,1520562210.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:30.426Z,1520562210.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:30.822Z,1520562210.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:31.233Z,1520562211.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:31.633Z,1520562211.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:32.034Z,1520562212.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:32.422Z,1520562212.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:32.831Z,1520562212.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:33.229Z,1520562213.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:33.627Z,1520562213.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:34.026Z,1520562214.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:34.433Z,1520562214.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:34.832Z,1520562214.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:35.226Z,1520562215.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:35.637Z,1520562215.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:36.030Z,1520562216.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:36.430Z,1520562216.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:36.833Z,1520562216.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:37.230Z,1520562217.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:37.631Z,1520562217.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:38.033Z,1520562218.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:38.435Z,1520562218.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:38.836Z,1520562218.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:39.234Z,1520562219.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:39.627Z,1520562219.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:40.022Z,1520562220.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:40.422Z,1520562220.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:40.818Z,1520562220.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:41.225Z,1520562221.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:41.630Z,1520562221.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:42.022Z,1520562222.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:42.429Z,1520562222.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:42.843Z,1520562222.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:43.231Z,1520562223.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:43.624Z,1520562223.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:44.061Z,1520562224.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:48.023Z,1520562228.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:48.137Z,1520562228.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:48.550Z,1520562228.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:48.946Z,1520562228.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:49.363Z,1520562229.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:49.747Z,1520562229.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:50.146Z,1520562230.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:50.543Z,1520562230.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:50.967Z,1520562230.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:51.342Z,1520562231.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:51.739Z,1520562231.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:52.146Z,1520562232.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:52.550Z,1520562232.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:52.943Z,1520562232.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:53.346Z,1520562233.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:53.742Z,1520562233.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:54.147Z,1520562234.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:54.555Z,1520562234.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:54.954Z,1520562234.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:55.348Z,1520562235.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:55.752Z,1520562235.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:56.155Z,1520562236.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:56.551Z,1520562236.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:56.954Z,1520562236.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:57.355Z,1520562237.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:57.749Z,1520562237.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:58.152Z,1520562238.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:58.542Z,1520562238.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:58.943Z,1520562238.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:59.349Z,1520562239.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:23:59.742Z,1520562239.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:00.142Z,1520562240.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:00.546Z,1520562240.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:00.946Z,1520562240.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:01.342Z,1520562241.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:01.746Z,1520562241.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:02.162Z,1520562242.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:02.543Z,1520562242.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:02.950Z,1520562242.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:03.342Z,1520562243.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:03.743Z,1520562243.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:04.151Z,1520562244.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:04.542Z,1520562244.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:04.943Z,1520562244.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:05.346Z,1520562245.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:05.745Z,1520562245.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:06.143Z,1520562246.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:06.558Z,1520562246.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:06.951Z,1520562246.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:07.354Z,1520562247.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:07.758Z,1520562247.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:08.155Z,1520562248.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:08.547Z,1520562248.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:08.950Z,1520562248.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:09.354Z,1520562249.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:09.747Z,1520562249.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:10.159Z,1520562250.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:10.551Z,1520562250.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:10.951Z,1520562250.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:11.355Z,1520562251.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:11.759Z,1520562251.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:12.150Z,1520562252.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:12.553Z,1520562252.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:12.942Z,1520562252.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:13.356Z,1520562253.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:13.767Z,1520562253.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:14.154Z,1520562254.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:14.544Z,1520562254.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:14.967Z,1520562254.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:15.364Z,1520562255.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:15.747Z,1520562255.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:16.147Z,1520562256.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:16.550Z,1520562256.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:16.943Z,1520562256.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:17.350Z,1520562257.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:17.750Z,1520562257.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:17.795Z,1520562257.795 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T02:24:17.795Z,1520562257.795 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 33
2018-03-09T02:24:17.795Z,1520562257.795 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T02:24:17.808Z,1520562257.808 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T02:24:18.139Z,1520562258.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:18.197Z,1520562258.197 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T02:24:18.197Z,1520562258.197 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 33
2018-03-09T02:24:18.547Z,1520562258.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:18.564Z,1520562258.564 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T02:24:18.564Z,1520562258.564 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T02:24:18.565Z,1520562258.565 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T02:24:18.955Z,1520562258.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:19.347Z,1520562259.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:19.754Z,1520562259.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:20.151Z,1520562260.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:20.554Z,1520562260.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:20.949Z,1520562260.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:21.358Z,1520562261.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:21.751Z,1520562261.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:22.154Z,1520562262.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:22.554Z,1520562262.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:22.954Z,1520562262.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:23.362Z,1520562263.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:23.750Z,1520562263.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:24.151Z,1520562264.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:24.554Z,1520562264.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:24.949Z,1520562264.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:25.360Z,1520562265.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:25.752Z,1520562265.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:26.142Z,1520562266.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:26.546Z,1520562266.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:26.967Z,1520562266.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:27.346Z,1520562267.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:27.740Z,1520562267.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:28.146Z,1520562268.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:28.550Z,1520562268.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:28.943Z,1520562268.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:29.350Z,1520562269.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:29.745Z,1520562269.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:30.144Z,1520562270.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:30.546Z,1520562270.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:30.951Z,1520562270.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:31.354Z,1520562271.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:31.756Z,1520562271.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:32.155Z,1520562272.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:32.549Z,1520562272.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:32.954Z,1520562272.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:33.354Z,1520562273.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:33.755Z,1520562273.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:34.159Z,1520562274.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:34.558Z,1520562274.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:34.953Z,1520562274.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:35.354Z,1520562275.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:35.754Z,1520562275.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:36.151Z,1520562276.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:36.554Z,1520562276.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:36.950Z,1520562276.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:37.358Z,1520562277.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:37.754Z,1520562277.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:38.154Z,1520562278.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:38.549Z,1520562278.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:38.954Z,1520562278.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:39.355Z,1520562279.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:39.755Z,1520562279.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:40.154Z,1520562280.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:40.554Z,1520562280.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:40.955Z,1520562280.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:41.363Z,1520562281.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:41.755Z,1520562281.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:42.154Z,1520562282.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:42.554Z,1520562282.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:42.958Z,1520562282.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:43.354Z,1520562283.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:43.753Z,1520562283.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:43.784Z,1520562283.784 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-09T02:24:43.784Z,1520562283.784 [Default:CheckIn:C.Wait] Stopped
2018-03-09T02:24:43.784Z,1520562283.784 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-09T02:24:43.784Z,1520562283.784 [Default:CheckIn:D] Running Loop=1
2018-03-09T02:24:44.152Z,1520562284.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:44.193Z,1520562284.193 [Default:CheckIn:D] Stopped
2018-03-09T02:24:44.193Z,1520562284.193 [Default:CheckIn:E] Running Loop=1
2018-03-09T02:24:47.457Z,1520562287.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:47.478Z,1520562287.478 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1118.989844 min 
2018-03-09T02:24:47.478Z,1520562287.478 [Default:CheckIn:E] Stopped
2018-03-09T02:24:47.478Z,1520562287.478 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-09T02:24:47.478Z,1520562287.478 [Default:CheckIn] Stopped
2018-03-09T02:24:47.478Z,1520562287.478 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-09T02:24:47.478Z,1520562287.478 [Default:CheckIn](INFO): Running loop #113
2018-03-09T02:24:47.479Z,1520562287.479 [Default:CheckIn] Running Loop=113
2018-03-09T02:24:47.479Z,1520562287.479 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-09T02:24:47.479Z,1520562287.479 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-09T02:24:47.575Z,1520562287.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:47.914Z,1520562287.914 [NAL9602](INFO): Powering up
2018-03-09T02:24:47.930Z,1520562287.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:48.328Z,1520562288.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:48.722Z,1520562288.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:49.127Z,1520562289.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:49.530Z,1520562289.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:49.931Z,1520562289.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:50.332Z,1520562290.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:50.725Z,1520562290.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:51.126Z,1520562291.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:51.528Z,1520562291.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:51.933Z,1520562291.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:52.331Z,1520562292.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:52.728Z,1520562292.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:53.130Z,1520562293.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:53.529Z,1520562293.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:53.921Z,1520562293.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:54.322Z,1520562294.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:54.718Z,1520562294.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:55.122Z,1520562295.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:55.522Z,1520562295.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:55.921Z,1520562295.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:56.326Z,1520562296.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:56.718Z,1520562296.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:57.120Z,1520562297.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:57.522Z,1520562297.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:57.918Z,1520562297.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:58.318Z,1520562298.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:58.745Z,1520562298.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:59.106Z,1520562299.106 [NAL9602](INFO): NAL9602 initialized
2018-03-09T02:24:59.122Z,1520562299.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:59.522Z,1520562299.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:24:59.933Z,1520562299.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:00.341Z,1520562300.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:00.741Z,1520562300.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:01.127Z,1520562301.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:01.531Z,1520562301.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:01.932Z,1520562301.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:02.330Z,1520562302.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:02.728Z,1520562302.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:03.126Z,1520562303.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:03.527Z,1520562303.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:03.925Z,1520562303.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:04.334Z,1520562304.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:04.722Z,1520562304.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:05.122Z,1520562305.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:05.522Z,1520562305.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:05.923Z,1520562305.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:06.322Z,1520562306.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:06.722Z,1520562306.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:07.122Z,1520562307.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:07.522Z,1520562307.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:07.928Z,1520562307.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:08.332Z,1520562308.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:08.733Z,1520562308.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:09.131Z,1520562309.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:09.531Z,1520562309.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:09.935Z,1520562309.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:10.327Z,1520562310.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:10.731Z,1520562310.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:11.121Z,1520562311.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:11.531Z,1520562311.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:11.939Z,1520562311.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:12.318Z,1520562312.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:12.730Z,1520562312.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:13.131Z,1520562313.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:13.543Z,1520562313.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:13.930Z,1520562313.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:14.343Z,1520562314.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:14.722Z,1520562314.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:15.131Z,1520562315.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:15.532Z,1520562315.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:15.929Z,1520562315.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:16.318Z,1520562316.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:16.732Z,1520562316.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:17.118Z,1520562317.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:17.534Z,1520562317.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:17.922Z,1520562317.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:18.322Z,1520562318.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:18.722Z,1520562318.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:19.122Z,1520562319.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:19.522Z,1520562319.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:19.918Z,1520562319.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:20.344Z,1520562320.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:20.722Z,1520562320.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:21.122Z,1520562321.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:21.548Z,1520562321.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:21.923Z,1520562321.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:22.323Z,1520562322.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:22.722Z,1520562322.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:23.126Z,1520562323.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:23.522Z,1520562323.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:23.926Z,1520562323.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:24.326Z,1520562324.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:24.722Z,1520562324.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:25.126Z,1520562325.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:25.526Z,1520562325.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:25.930Z,1520562325.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:26.331Z,1520562326.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:26.731Z,1520562326.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:27.131Z,1520562327.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:27.538Z,1520562327.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:27.935Z,1520562327.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:28.330Z,1520562328.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:28.739Z,1520562328.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:29.135Z,1520562329.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:29.530Z,1520562329.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:29.931Z,1520562329.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:30.334Z,1520562330.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:30.718Z,1520562330.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:31.106Z,1520562331.106 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-09T02:25:31.188Z,1520562331.188 [NAL9602](FAULT): received: 
+CSQ:0

OK12, 2, 0, 0, 0

OK
2018-03-09T02:25:31.189Z,1520562331.189 [NAL9602] Data Fault, FailCount= 2
2018-03-09T02:25:31.189Z,1520562331.189 [NAL9602](ERROR): Data Fault
2018-03-09T02:25:31.205Z,1520562331.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:31.285Z,1520562331.285 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-09T02:25:31.506Z,1520562331.506 [NAL9602](INFO): Powering down
2018-03-09T02:25:31.523Z,1520562331.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:31.920Z,1520562331.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:32.322Z,1520562332.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:32.388Z,1520562332.388 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-09T02:25:32.388Z,1520562332.388 [NAL9602] No Fault, FailCount= 2
2018-03-09T02:25:32.726Z,1520562332.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:33.129Z,1520562333.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:33.526Z,1520562333.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:33.932Z,1520562333.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:34.327Z,1520562334.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:34.729Z,1520562334.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:35.128Z,1520562335.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:35.533Z,1520562335.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:35.933Z,1520562335.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:36.328Z,1520562336.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:36.729Z,1520562336.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:37.130Z,1520562337.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:37.525Z,1520562337.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:37.922Z,1520562337.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:38.322Z,1520562338.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:38.723Z,1520562338.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:39.119Z,1520562339.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:39.522Z,1520562339.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:39.942Z,1520562339.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:40.322Z,1520562340.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:40.743Z,1520562340.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:41.122Z,1520562341.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:41.522Z,1520562341.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:41.922Z,1520562341.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:42.333Z,1520562342.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:42.735Z,1520562342.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:43.133Z,1520562343.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:43.534Z,1520562343.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:43.930Z,1520562343.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:44.345Z,1520562344.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:48.061Z,1520562348.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:48.188Z,1520562348.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:48.582Z,1520562348.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:48.979Z,1520562348.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:49.378Z,1520562349.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:49.777Z,1520562349.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:50.181Z,1520562350.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:50.564Z,1520562350.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:50.982Z,1520562350.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:51.382Z,1520562351.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:51.767Z,1520562351.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:52.182Z,1520562352.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:52.582Z,1520562352.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:52.967Z,1520562352.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:53.391Z,1520562353.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:53.766Z,1520562353.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:54.170Z,1520562354.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:54.590Z,1520562354.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:54.970Z,1520562354.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:55.371Z,1520562355.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:55.770Z,1520562355.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:56.170Z,1520562356.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:56.566Z,1520562356.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:56.970Z,1520562356.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:57.374Z,1520562357.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:57.771Z,1520562357.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:58.175Z,1520562358.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:58.578Z,1520562358.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:58.975Z,1520562358.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:59.376Z,1520562359.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:25:59.778Z,1520562359.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:00.181Z,1520562360.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:00.576Z,1520562360.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:00.978Z,1520562360.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:01.378Z,1520562361.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:01.754Z,1520562361.754 [NAL9602](INFO): Powering up NAL9602
2018-03-09T02:26:01.783Z,1520562361.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:02.179Z,1520562362.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:02.578Z,1520562362.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:02.977Z,1520562362.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:03.382Z,1520562363.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:03.782Z,1520562363.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:04.173Z,1520562364.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:04.582Z,1520562364.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:04.968Z,1520562364.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:05.374Z,1520562365.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:05.770Z,1520562365.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:06.166Z,1520562366.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:06.570Z,1520562366.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:06.971Z,1520562366.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:07.374Z,1520562367.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:07.770Z,1520562367.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:08.170Z,1520562368.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:08.567Z,1520562368.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:08.970Z,1520562368.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:09.370Z,1520562369.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:09.768Z,1520562369.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:10.170Z,1520562370.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:10.570Z,1520562370.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:10.967Z,1520562370.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:11.382Z,1520562371.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:11.777Z,1520562371.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:12.182Z,1520562372.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:12.554Z,1520562372.554 [NAL9602](INFO): NAL9602 initialized
2018-03-09T02:26:12.581Z,1520562372.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:12.984Z,1520562372.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:13.354Z,1520562373.354 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-09T02:26:13.354Z,1520562373.354 [NAL9602] Data Fault, FailCount= 3
2018-03-09T02:26:13.354Z,1520562373.354 [NAL9602](ERROR): Data Fault
2018-03-09T02:26:13.376Z,1520562373.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:13.453Z,1520562373.453 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-09T02:26:13.754Z,1520562373.754 [NAL9602](INFO): Powering down
2018-03-09T02:26:13.784Z,1520562373.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:14.179Z,1520562374.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:14.579Z,1520562374.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:14.610Z,1520562374.610 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-09T02:26:14.610Z,1520562374.610 [NAL9602] No Fault, FailCount= 3
2018-03-09T02:26:14.977Z,1520562374.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:15.378Z,1520562375.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:15.778Z,1520562375.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:16.179Z,1520562376.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:16.579Z,1520562376.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:16.966Z,1520562376.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:17.378Z,1520562377.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:17.817Z,1520562377.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:18.163Z,1520562378.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:18.572Z,1520562378.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:18.974Z,1520562378.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:19.374Z,1520562379.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:19.774Z,1520562379.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:20.174Z,1520562380.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:20.638Z,1520562380.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:20.970Z,1520562380.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:21.379Z,1520562381.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:21.779Z,1520562381.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:22.192Z,1520562382.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:22.583Z,1520562382.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:22.967Z,1520562382.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:23.380Z,1520562383.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:23.783Z,1520562383.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:24.167Z,1520562384.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:24.582Z,1520562384.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:24.982Z,1520562384.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:25.383Z,1520562385.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:25.770Z,1520562385.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:26.171Z,1520562386.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:26.564Z,1520562386.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:26.970Z,1520562386.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:27.374Z,1520562387.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:27.770Z,1520562387.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:28.175Z,1520562388.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:28.570Z,1520562388.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:28.970Z,1520562388.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:29.375Z,1520562389.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:29.775Z,1520562389.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:30.179Z,1520562390.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:30.578Z,1520562390.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:30.977Z,1520562390.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:31.379Z,1520562391.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:31.778Z,1520562391.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:32.178Z,1520562392.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:32.578Z,1520562392.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:32.978Z,1520562392.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:33.382Z,1520562393.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:33.778Z,1520562393.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:34.178Z,1520562394.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:34.587Z,1520562394.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:34.983Z,1520562394.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:35.387Z,1520562395.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:35.787Z,1520562395.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:36.164Z,1520562396.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:36.570Z,1520562396.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:36.991Z,1520562396.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:37.366Z,1520562397.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:37.790Z,1520562397.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:38.182Z,1520562398.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:38.566Z,1520562398.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:38.974Z,1520562398.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:39.374Z,1520562399.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:39.775Z,1520562399.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:40.170Z,1520562400.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:40.573Z,1520562400.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:40.966Z,1520562400.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:41.370Z,1520562401.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:41.773Z,1520562401.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:42.191Z,1520562402.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:42.570Z,1520562402.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:42.970Z,1520562402.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:43.370Z,1520562403.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:43.770Z,1520562403.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:44.158Z,1520562404.158 [NAL9602](INFO): Powering up NAL9602
2018-03-09T02:26:44.175Z,1520562404.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:44.575Z,1520562404.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:47.716Z,1520562407.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:47.867Z,1520562407.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:48.246Z,1520562408.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:48.638Z,1520562408.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:49.062Z,1520562409.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:49.457Z,1520562409.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:49.834Z,1520562409.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:50.237Z,1520562410.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:50.659Z,1520562410.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:51.034Z,1520562411.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:51.437Z,1520562411.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:51.838Z,1520562411.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:52.246Z,1520562412.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:52.643Z,1520562412.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:53.038Z,1520562413.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:53.442Z,1520562413.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:53.842Z,1520562413.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:54.238Z,1520562414.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:54.649Z,1520562414.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:55.022Z,1520562415.022 [NAL9602](INFO): NAL9602 initialized
2018-03-09T02:26:55.039Z,1520562415.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:55.447Z,1520562415.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:55.849Z,1520562415.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:56.263Z,1520562416.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:56.649Z,1520562416.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:57.047Z,1520562417.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:57.441Z,1520562417.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:57.850Z,1520562417.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:58.276Z,1520562418.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:58.654Z,1520562418.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:59.039Z,1520562419.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:59.446Z,1520562419.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:59.846Z,1520562419.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:26:59.881Z,1520562419.881 [BPC1](ERROR): Bank B: No match for stick 3 serial number:1717 in the onboard configuration file.
2018-03-09T02:26:59.882Z,1520562419.882 [BPC1](ERROR): Failed to parse Bank B battery data
2018-03-09T02:26:59.882Z,1520562419.882 [BPC1] Data Fault, FailCount= 1
2018-03-09T02:26:59.882Z,1520562419.882 [BPC1](ERROR): Data Fault
2018-03-09T02:26:59.930Z,1520562419.930 [CBIT](ERROR): Data Fault in component: BPC1
2018-03-09T02:27:00.254Z,1520562420.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:00.643Z,1520562420.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:01.042Z,1520562421.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:01.092Z,1520562421.092 [CBIT](INFO): Clearing failed state for component BPC1
2018-03-09T02:27:01.093Z,1520562421.093 [BPC1] No Fault, FailCount= 1
2018-03-09T02:27:01.446Z,1520562421.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:01.847Z,1520562421.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:02.251Z,1520562422.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:02.669Z,1520562422.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:03.053Z,1520562423.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:03.453Z,1520562423.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:03.869Z,1520562423.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:04.234Z,1520562424.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:04.636Z,1520562424.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:05.055Z,1520562425.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:05.434Z,1520562425.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:05.834Z,1520562425.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:06.252Z,1520562426.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:06.639Z,1520562426.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:07.034Z,1520562427.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:07.439Z,1520562427.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:07.853Z,1520562427.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:08.262Z,1520562428.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:08.659Z,1520562428.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:09.058Z,1520562429.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:09.438Z,1520562429.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:09.838Z,1520562429.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:10.243Z,1520562430.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:10.642Z,1520562430.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:11.044Z,1520562431.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:11.443Z,1520562431.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:11.844Z,1520562431.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:12.247Z,1520562432.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:12.643Z,1520562432.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:13.049Z,1520562433.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:13.456Z,1520562433.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:13.858Z,1520562433.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:14.254Z,1520562434.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:14.647Z,1520562434.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:15.047Z,1520562435.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:15.459Z,1520562435.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:15.841Z,1520562435.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:16.245Z,1520562436.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:16.651Z,1520562436.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:17.045Z,1520562437.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:17.448Z,1520562437.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:17.841Z,1520562437.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:18.262Z,1520562438.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:18.659Z,1520562438.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:18.684Z,1520562438.684 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T02:27:18.684Z,1520562438.684 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 34
2018-03-09T02:27:18.684Z,1520562438.684 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T02:27:18.725Z,1520562438.725 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T02:27:19.055Z,1520562439.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:19.145Z,1520562439.145 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T02:27:19.146Z,1520562439.146 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 34
2018-03-09T02:27:19.457Z,1520562439.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:19.493Z,1520562439.493 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T02:27:19.494Z,1520562439.494 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T02:27:19.494Z,1520562439.494 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T02:27:19.838Z,1520562439.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:20.234Z,1520562440.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:20.638Z,1520562440.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:21.042Z,1520562441.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:21.425Z,1520562441.425 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-03-09T02:27:21.425Z,1520562441.425 [DropWeight] Hardware Fault, FailCount= 1
2018-03-09T02:27:21.425Z,1520562441.425 [DropWeight](ERROR): Hardware Fault
2018-03-09T02:27:21.443Z,1520562441.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:21.516Z,1520562441.516 [CBIT](INFO): Critical error at 20180309T022721
2018-03-09T02:27:21.519Z,1520562441.519 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-03-09T02:27:21.519Z,1520562441.519 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-03-09T02:27:21.846Z,1520562441.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:21.893Z,1520562441.893 [CBIT](INFO): Critical error at 20180309T022721
2018-03-09T02:27:22.258Z,1520562442.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:22.638Z,1520562442.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:23.053Z,1520562443.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:23.457Z,1520562443.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:23.849Z,1520562443.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:24.253Z,1520562444.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:24.661Z,1520562444.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:25.039Z,1520562445.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:25.447Z,1520562445.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:25.846Z,1520562445.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:26.247Z,1520562446.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:26.644Z,1520562446.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:27.046Z,1520562447.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:27.450Z,1520562447.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:27.846Z,1520562447.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:28.243Z,1520562448.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:28.656Z,1520562448.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:29.055Z,1520562449.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:29.455Z,1520562449.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:29.857Z,1520562449.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:30.259Z,1520562450.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:30.641Z,1520562450.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:31.038Z,1520562451.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:31.457Z,1520562451.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:31.838Z,1520562451.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:32.240Z,1520562452.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:32.638Z,1520562452.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:33.042Z,1520562453.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:33.441Z,1520562453.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:33.865Z,1520562453.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:34.249Z,1520562454.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:34.649Z,1520562454.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:35.062Z,1520562455.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:35.434Z,1520562455.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:35.838Z,1520562455.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:36.238Z,1520562456.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:36.638Z,1520562456.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:37.035Z,1520562457.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:37.438Z,1520562457.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:37.850Z,1520562457.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:38.242Z,1520562458.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:38.638Z,1520562458.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:39.049Z,1520562459.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:39.449Z,1520562459.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:39.850Z,1520562459.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:40.249Z,1520562460.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:40.642Z,1520562460.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:41.075Z,1520562461.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:41.439Z,1520562461.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:41.850Z,1520562461.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:42.237Z,1520562462.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:42.665Z,1520562462.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:43.049Z,1520562463.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:43.452Z,1520562463.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:43.862Z,1520562463.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:44.258Z,1520562464.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:44.658Z,1520562464.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:48.503Z,1520562468.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:48.625Z,1520562468.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:48.982Z,1520562468.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:49.381Z,1520562469.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:49.785Z,1520562469.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:50.190Z,1520562470.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:50.589Z,1520562470.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:50.974Z,1520562470.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:51.375Z,1520562471.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:51.770Z,1520562471.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:52.166Z,1520562472.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:52.565Z,1520562472.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:52.967Z,1520562472.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:53.377Z,1520562473.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:53.766Z,1520562473.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:54.166Z,1520562474.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:54.585Z,1520562474.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:54.986Z,1520562474.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:55.375Z,1520562475.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:55.789Z,1520562475.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:56.166Z,1520562476.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:56.566Z,1520562476.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:56.966Z,1520562476.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:57.385Z,1520562477.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:57.767Z,1520562477.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:58.179Z,1520562478.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:58.566Z,1520562478.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:58.966Z,1520562478.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:59.366Z,1520562479.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:27:59.780Z,1520562479.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:00.185Z,1520562480.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:00.581Z,1520562480.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:00.985Z,1520562480.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:01.372Z,1520562481.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:01.767Z,1520562481.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:02.171Z,1520562482.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:02.575Z,1520562482.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:02.974Z,1520562482.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:03.372Z,1520562483.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:03.775Z,1520562483.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:04.172Z,1520562484.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:04.574Z,1520562484.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:04.983Z,1520562484.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:05.389Z,1520562485.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:05.783Z,1520562485.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:06.185Z,1520562486.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:06.566Z,1520562486.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:06.966Z,1520562486.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:07.366Z,1520562487.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:07.766Z,1520562487.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:08.166Z,1520562488.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:08.566Z,1520562488.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:08.962Z,1520562488.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:09.366Z,1520562489.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:09.766Z,1520562489.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:10.185Z,1520562490.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:10.586Z,1520562490.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:10.986Z,1520562490.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:11.373Z,1520562491.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:11.766Z,1520562491.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:12.167Z,1520562492.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:12.564Z,1520562492.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:12.966Z,1520562492.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:13.362Z,1520562493.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:13.764Z,1520562493.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:14.166Z,1520562494.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:14.571Z,1520562494.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:14.968Z,1520562494.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:15.385Z,1520562495.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:15.785Z,1520562495.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:16.170Z,1520562496.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:16.582Z,1520562496.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:16.975Z,1520562496.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:17.375Z,1520562497.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:17.772Z,1520562497.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:18.173Z,1520562498.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:18.584Z,1520562498.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:18.986Z,1520562498.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:19.386Z,1520562499.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:19.785Z,1520562499.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:20.165Z,1520562500.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:20.566Z,1520562500.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:20.966Z,1520562500.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:21.366Z,1520562501.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:21.767Z,1520562501.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:22.166Z,1520562502.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:22.570Z,1520562502.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:22.973Z,1520562502.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:23.371Z,1520562503.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:23.778Z,1520562503.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:24.177Z,1520562504.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:24.577Z,1520562504.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:24.981Z,1520562504.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:25.366Z,1520562505.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:25.766Z,1520562505.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:26.167Z,1520562506.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:26.570Z,1520562506.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:26.969Z,1520562506.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:27.383Z,1520562507.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:27.769Z,1520562507.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:28.169Z,1520562508.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:28.584Z,1520562508.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:28.981Z,1520562508.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:29.389Z,1520562509.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:29.783Z,1520562509.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:30.186Z,1520562510.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:30.566Z,1520562510.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:30.966Z,1520562510.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:31.366Z,1520562511.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:31.766Z,1520562511.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:32.165Z,1520562512.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:32.566Z,1520562512.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:32.970Z,1520562512.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:33.366Z,1520562513.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:33.770Z,1520562513.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:34.184Z,1520562514.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:34.599Z,1520562514.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:34.995Z,1520562514.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:35.392Z,1520562515.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:35.778Z,1520562515.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:36.178Z,1520562516.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:36.574Z,1520562516.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:36.991Z,1520562516.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:37.375Z,1520562517.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:37.774Z,1520562517.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:38.183Z,1520562518.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:38.571Z,1520562518.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:38.964Z,1520562518.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:39.390Z,1520562519.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:39.789Z,1520562519.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:40.181Z,1520562520.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:40.590Z,1520562520.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:40.971Z,1520562520.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:41.371Z,1520562521.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:41.772Z,1520562521.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:42.174Z,1520562522.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:42.574Z,1520562522.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:42.974Z,1520562522.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:43.375Z,1520562523.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:43.780Z,1520562523.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:44.178Z,1520562524.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:44.585Z,1520562524.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:44.980Z,1520562524.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:48.230Z,1520562528.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:48.366Z,1520562528.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:48.752Z,1520562528.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:49.151Z,1520562529.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:49.553Z,1520562529.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:49.956Z,1520562529.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:50.358Z,1520562530.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:50.756Z,1520562530.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:51.138Z,1520562531.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:51.539Z,1520562531.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:51.939Z,1520562531.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:52.339Z,1520562532.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:52.739Z,1520562532.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:53.139Z,1520562533.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:53.538Z,1520562533.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:53.938Z,1520562533.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:54.342Z,1520562534.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:54.754Z,1520562534.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:55.157Z,1520562535.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:55.554Z,1520562535.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:55.961Z,1520562535.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:56.338Z,1520562536.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:56.746Z,1520562536.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:57.144Z,1520562537.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:57.543Z,1520562537.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:57.943Z,1520562537.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:58.347Z,1520562538.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:58.746Z,1520562538.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:59.146Z,1520562539.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:59.545Z,1520562539.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:28:59.955Z,1520562539.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:00.360Z,1520562540.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:00.755Z,1520562540.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:01.158Z,1520562541.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:01.537Z,1520562541.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:01.938Z,1520562541.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:02.338Z,1520562542.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:02.737Z,1520562542.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:03.138Z,1520562543.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:03.538Z,1520562543.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:03.946Z,1520562543.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:04.343Z,1520562544.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:04.742Z,1520562544.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:05.160Z,1520562545.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:05.561Z,1520562545.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:05.950Z,1520562545.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:06.356Z,1520562546.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:06.745Z,1520562546.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:07.146Z,1520562547.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:07.541Z,1520562547.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:07.941Z,1520562547.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:08.348Z,1520562548.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:08.745Z,1520562548.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:09.141Z,1520562549.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:09.538Z,1520562549.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:09.939Z,1520562549.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:10.349Z,1520562550.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:10.763Z,1520562550.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:11.150Z,1520562551.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:11.550Z,1520562551.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:11.938Z,1520562551.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:12.337Z,1520562552.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:12.739Z,1520562552.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:13.143Z,1520562553.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:13.550Z,1520562553.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:13.945Z,1520562553.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:14.347Z,1520562554.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:14.747Z,1520562554.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:15.144Z,1520562555.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:15.579Z,1520562555.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:15.959Z,1520562555.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:16.357Z,1520562556.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:16.757Z,1520562556.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:17.138Z,1520562557.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:17.538Z,1520562557.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:17.938Z,1520562557.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:18.342Z,1520562558.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:18.738Z,1520562558.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:19.138Z,1520562559.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:19.542Z,1520562559.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:19.937Z,1520562559.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:20.339Z,1520562560.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:20.762Z,1520562560.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:21.149Z,1520562561.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:21.549Z,1520562561.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:21.949Z,1520562561.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:22.338Z,1520562562.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:22.742Z,1520562562.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:23.142Z,1520562563.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:23.538Z,1520562563.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:23.946Z,1520562563.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:24.346Z,1520562564.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:24.747Z,1520562564.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:25.147Z,1520562565.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:25.546Z,1520562565.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:25.955Z,1520562565.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:26.355Z,1520562566.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:26.756Z,1520562566.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:27.158Z,1520562567.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:27.542Z,1520562567.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:27.942Z,1520562567.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:28.337Z,1520562568.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:28.739Z,1520562568.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:29.137Z,1520562569.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:29.539Z,1520562569.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:29.939Z,1520562569.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:30.342Z,1520562570.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:30.738Z,1520562570.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:31.163Z,1520562571.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:31.558Z,1520562571.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:31.954Z,1520562571.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:32.358Z,1520562572.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:32.737Z,1520562572.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:33.138Z,1520562573.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:33.538Z,1520562573.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:33.946Z,1520562573.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:34.338Z,1520562574.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:34.758Z,1520562574.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:35.138Z,1520562575.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:35.538Z,1520562575.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:35.942Z,1520562575.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:36.362Z,1520562576.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:36.750Z,1520562576.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:37.149Z,1520562577.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:37.563Z,1520562577.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:37.947Z,1520562577.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:38.343Z,1520562578.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:38.737Z,1520562578.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:39.143Z,1520562579.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:39.543Z,1520562579.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:39.938Z,1520562579.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:40.345Z,1520562580.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:40.746Z,1520562580.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:41.145Z,1520562581.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:41.556Z,1520562581.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:41.958Z,1520562581.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:42.357Z,1520562582.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:42.761Z,1520562582.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:43.140Z,1520562583.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:43.540Z,1520562583.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:43.965Z,1520562583.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:44.346Z,1520562584.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:44.740Z,1520562584.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:45.154Z,1520562585.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:48.973Z,1520562588.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:49.004Z,1520562589.004 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-09T02:24:47.5Z
2018-03-09T02:29:49.004Z,1520562589.004 [Default:CheckIn:Read_GPS] Stopped
2018-03-09T02:29:49.004Z,1520562589.004 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-09T02:29:49.113Z,1520562589.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:49.529Z,1520562589.529 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20180308T074127/Courier0452.lzma
2018-03-09T02:29:49.570Z,1520562589.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:49.870Z,1520562589.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:50.228Z,1520562590.228 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0452.lzma.bak
2018-03-09T02:29:50.228Z,1520562590.228 [DataOverHttps](INFO): SBD MOMSN=7991452
2018-03-09T02:29:50.265Z,1520562590.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:51.024Z,1520562591.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:51.183Z,1520562591.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:51.567Z,1520562591.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:54.930Z,1520562594.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:55.053Z,1520562595.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:55.449Z,1520562595.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:55.849Z,1520562595.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:56.240Z,1520562596.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:56.636Z,1520562596.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:29:57.032Z,1520562597.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:00.317Z,1520562600.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:00.451Z,1520562600.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:00.773Z,1520562600.773 [DataOverHttps](INFO): Sending 254 bytes from file Logs/20180308T074127/Express0453.lzma
2018-03-09T02:30:00.821Z,1520562600.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:01.209Z,1520562601.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:01.572Z,1520562601.572 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0453.lzma.bak
2018-03-09T02:30:01.572Z,1520562601.572 [DataOverHttps](INFO): SBD MOMSN=7991456
2018-03-09T02:30:01.614Z,1520562601.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:02.214Z,1520562602.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:02.235Z,1520562602.235 [Default:CheckIn:Read_Iridium] Stopped
2018-03-09T02:30:02.235Z,1520562602.235 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-09T02:30:02.235Z,1520562602.235 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-09T02:30:02.382Z,1520562602.382 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-09T02:30:02.411Z,1520562602.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:05.542Z,1520562605.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:05.688Z,1520562605.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:06.085Z,1520562606.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:06.470Z,1520562606.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:06.894Z,1520562606.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:07.257Z,1520562607.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:07.659Z,1520562607.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:08.057Z,1520562608.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:08.454Z,1520562608.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:08.853Z,1520562608.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:09.261Z,1520562609.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:09.666Z,1520562609.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:10.051Z,1520562610.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:10.463Z,1520562610.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:10.867Z,1520562610.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:11.261Z,1520562611.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:11.666Z,1520562611.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:12.063Z,1520562612.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:12.452Z,1520562612.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:12.872Z,1520562612.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:13.315Z,1520562613.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:13.659Z,1520562613.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:14.058Z,1520562614.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:14.485Z,1520562614.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:14.854Z,1520562614.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:15.257Z,1520562615.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:15.662Z,1520562615.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:16.068Z,1520562616.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:16.460Z,1520562616.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:16.860Z,1520562616.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:17.268Z,1520562617.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:17.655Z,1520562617.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:18.055Z,1520562618.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:18.455Z,1520562618.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:18.855Z,1520562618.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:19.259Z,1520562619.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:19.654Z,1520562619.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:19.694Z,1520562619.694 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T02:30:19.694Z,1520562619.694 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 35
2018-03-09T02:30:19.694Z,1520562619.694 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T02:30:19.707Z,1520562619.707 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T02:30:20.061Z,1520562620.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:20.105Z,1520562620.105 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T02:30:20.105Z,1520562620.105 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 35
2018-03-09T02:30:20.456Z,1520562620.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:20.545Z,1520562620.545 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T02:30:20.546Z,1520562620.546 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T02:30:20.546Z,1520562620.546 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T02:30:20.863Z,1520562620.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:21.253Z,1520562621.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:21.664Z,1520562621.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:22.055Z,1520562622.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:22.455Z,1520562622.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:22.854Z,1520562622.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:23.254Z,1520562623.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:23.661Z,1520562623.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:24.056Z,1520562624.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:24.455Z,1520562624.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:24.850Z,1520562624.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:25.258Z,1520562625.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:25.659Z,1520562625.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:26.055Z,1520562626.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:26.457Z,1520562626.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:26.857Z,1520562626.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:27.262Z,1520562627.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:27.662Z,1520562627.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:28.065Z,1520562628.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:28.464Z,1520562628.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:28.854Z,1520562628.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:29.254Z,1520562629.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:29.657Z,1520562629.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:30.063Z,1520562630.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:30.463Z,1520562630.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:30.860Z,1520562630.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:31.260Z,1520562631.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:31.664Z,1520562631.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:32.066Z,1520562632.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:32.460Z,1520562632.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:32.861Z,1520562632.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:33.262Z,1520562633.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:33.668Z,1520562633.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:34.065Z,1520562634.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:34.470Z,1520562634.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:34.864Z,1520562634.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:35.254Z,1520562635.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:35.635Z,1520562635.635 [NAL9602](INFO): Powering down
2018-03-09T02:30:35.653Z,1520562635.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:36.055Z,1520562636.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:36.479Z,1520562636.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:36.856Z,1520562636.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:37.267Z,1520562637.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:37.660Z,1520562637.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:38.064Z,1520562638.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:38.463Z,1520562638.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:38.858Z,1520562638.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:39.264Z,1520562639.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:39.667Z,1520562639.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:40.077Z,1520562640.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:40.457Z,1520562640.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:40.865Z,1520562640.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:41.265Z,1520562641.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:41.654Z,1520562641.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:42.055Z,1520562642.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:42.455Z,1520562642.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:42.859Z,1520562642.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:43.258Z,1520562643.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:43.658Z,1520562643.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:44.065Z,1520562644.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:44.465Z,1520562644.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:44.861Z,1520562644.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:45.258Z,1520562645.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:45.665Z,1520562645.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:46.061Z,1520562646.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:46.462Z,1520562646.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:46.860Z,1520562646.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:47.265Z,1520562647.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:47.660Z,1520562647.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:48.066Z,1520562648.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:48.460Z,1520562648.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:48.862Z,1520562648.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:49.264Z,1520562649.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:49.654Z,1520562649.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:50.054Z,1520562650.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:50.456Z,1520562650.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:50.859Z,1520562650.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:51.258Z,1520562651.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:51.658Z,1520562651.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:52.060Z,1520562652.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:52.456Z,1520562652.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:52.862Z,1520562652.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:53.258Z,1520562653.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:53.658Z,1520562653.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:54.062Z,1520562654.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:54.461Z,1520562654.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:54.864Z,1520562654.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:55.261Z,1520562655.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:55.660Z,1520562655.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:56.062Z,1520562656.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:56.463Z,1520562656.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:56.870Z,1520562656.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:57.265Z,1520562657.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:57.681Z,1520562657.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:58.062Z,1520562658.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:58.488Z,1520562658.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:58.868Z,1520562658.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:59.253Z,1520562659.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:30:59.647Z,1520562659.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:00.060Z,1520562660.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:00.459Z,1520562660.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:00.852Z,1520562660.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:01.265Z,1520562661.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:01.660Z,1520562661.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:02.062Z,1520562662.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:02.462Z,1520562662.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:02.863Z,1520562662.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:06.185Z,1520562666.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:06.310Z,1520562666.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:06.669Z,1520562666.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:07.069Z,1520562667.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:07.471Z,1520562667.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:07.860Z,1520562667.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:08.251Z,1520562668.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:08.670Z,1520562668.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:09.063Z,1520562669.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:09.466Z,1520562669.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:09.861Z,1520562669.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:10.261Z,1520562670.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:10.665Z,1520562670.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:11.078Z,1520562671.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:11.470Z,1520562671.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:11.858Z,1520562671.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:12.270Z,1520562672.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:12.658Z,1520562672.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:13.058Z,1520562673.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:13.458Z,1520562673.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:13.862Z,1520562673.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:14.254Z,1520562674.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:14.662Z,1520562674.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:15.058Z,1520562675.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:15.458Z,1520562675.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:15.858Z,1520562675.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:16.274Z,1520562676.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:16.658Z,1520562676.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:17.063Z,1520562677.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:17.459Z,1520562677.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:17.858Z,1520562677.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:18.258Z,1520562678.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:18.658Z,1520562678.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:19.058Z,1520562679.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:19.454Z,1520562679.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:19.858Z,1520562679.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:20.258Z,1520562680.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:20.656Z,1520562680.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:21.058Z,1520562681.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:21.465Z,1520562681.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:21.866Z,1520562681.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:22.270Z,1520562682.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:22.664Z,1520562682.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:23.062Z,1520562683.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:23.467Z,1520562683.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:23.865Z,1520562683.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:24.265Z,1520562684.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:24.675Z,1520562684.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:25.068Z,1520562685.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:25.466Z,1520562685.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:25.875Z,1520562685.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:26.265Z,1520562686.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:26.662Z,1520562686.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:27.063Z,1520562687.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:27.464Z,1520562687.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:27.870Z,1520562687.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:28.264Z,1520562688.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:28.661Z,1520562688.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:29.069Z,1520562689.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:29.461Z,1520562689.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:29.869Z,1520562689.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:30.260Z,1520562690.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:30.658Z,1520562690.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:31.054Z,1520562691.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:31.458Z,1520562691.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:31.858Z,1520562691.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:32.258Z,1520562692.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:32.658Z,1520562692.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:33.078Z,1520562693.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:33.457Z,1520562693.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:33.858Z,1520562693.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:34.258Z,1520562694.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:34.658Z,1520562694.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:35.062Z,1520562695.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:35.467Z,1520562695.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:35.863Z,1520562695.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:36.267Z,1520562696.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:36.664Z,1520562696.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:37.065Z,1520562697.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:37.464Z,1520562697.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:37.864Z,1520562697.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:38.264Z,1520562698.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:38.663Z,1520562698.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:39.065Z,1520562699.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:39.465Z,1520562699.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:39.864Z,1520562699.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:40.264Z,1520562700.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:40.669Z,1520562700.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:41.065Z,1520562701.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:41.464Z,1520562701.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:41.869Z,1520562701.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:42.267Z,1520562702.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:42.667Z,1520562702.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:43.066Z,1520562703.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:43.459Z,1520562703.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:43.860Z,1520562703.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:44.258Z,1520562704.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:44.663Z,1520562704.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:45.066Z,1520562705.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:45.479Z,1520562705.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:45.866Z,1520562705.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:46.272Z,1520562706.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:46.667Z,1520562706.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:47.063Z,1520562707.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:47.475Z,1520562707.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:47.865Z,1520562707.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:48.269Z,1520562708.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:48.665Z,1520562708.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:49.066Z,1520562709.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:49.455Z,1520562709.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:49.870Z,1520562709.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:50.258Z,1520562710.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:50.658Z,1520562710.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:51.059Z,1520562711.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:51.458Z,1520562711.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:51.859Z,1520562711.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:52.258Z,1520562712.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:52.658Z,1520562712.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:53.058Z,1520562713.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:53.481Z,1520562713.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:53.858Z,1520562713.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:54.259Z,1520562714.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:54.658Z,1520562714.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:55.058Z,1520562715.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:55.458Z,1520562715.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:55.858Z,1520562715.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:56.270Z,1520562716.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:56.658Z,1520562716.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:57.057Z,1520562717.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:57.458Z,1520562717.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:57.858Z,1520562717.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:58.257Z,1520562718.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:58.661Z,1520562718.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:59.070Z,1520562719.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:59.458Z,1520562719.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:31:59.857Z,1520562719.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:00.258Z,1520562720.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:00.658Z,1520562720.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:01.058Z,1520562721.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:01.458Z,1520562721.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:01.861Z,1520562721.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:02.262Z,1520562722.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:02.652Z,1520562722.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:03.064Z,1520562723.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:06.257Z,1520562726.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:06.372Z,1520562726.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:06.737Z,1520562726.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:07.131Z,1520562727.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:07.529Z,1520562727.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:07.931Z,1520562727.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:08.329Z,1520562728.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:08.725Z,1520562728.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:08.756Z,1520562728.756 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-09T02:32:09.139Z,1520562729.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:09.521Z,1520562729.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:09.934Z,1520562729.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:10.329Z,1520562730.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:10.718Z,1520562730.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:11.118Z,1520562731.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:11.529Z,1520562731.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:11.934Z,1520562731.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:12.333Z,1520562732.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:12.730Z,1520562732.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:13.133Z,1520562733.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:13.530Z,1520562733.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:13.931Z,1520562733.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:14.329Z,1520562734.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:14.718Z,1520562734.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:15.122Z,1520562735.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:15.534Z,1520562735.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:15.918Z,1520562735.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:16.330Z,1520562736.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:16.728Z,1520562736.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:17.122Z,1520562737.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:17.522Z,1520562737.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:17.923Z,1520562737.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:18.343Z,1520562738.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:18.726Z,1520562738.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:19.126Z,1520562739.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:19.522Z,1520562739.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:19.919Z,1520562739.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:20.322Z,1520562740.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:20.743Z,1520562740.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:21.122Z,1520562741.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:21.522Z,1520562741.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:21.926Z,1520562741.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:22.330Z,1520562742.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:22.727Z,1520562742.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:23.130Z,1520562743.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:23.530Z,1520562743.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:23.930Z,1520562743.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:24.331Z,1520562744.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:24.728Z,1520562744.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:25.127Z,1520562745.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:25.531Z,1520562745.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:25.929Z,1520562745.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:26.339Z,1520562746.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:26.725Z,1520562746.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:27.139Z,1520562747.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:27.530Z,1520562747.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:27.926Z,1520562747.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:28.329Z,1520562748.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:28.734Z,1520562748.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:29.126Z,1520562749.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:29.539Z,1520562749.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:29.934Z,1520562749.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:30.325Z,1520562750.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:30.729Z,1520562750.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:31.125Z,1520562751.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:31.534Z,1520562751.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:31.922Z,1520562751.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:32.327Z,1520562752.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:32.722Z,1520562752.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:33.147Z,1520562753.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:33.523Z,1520562753.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:33.934Z,1520562753.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:34.322Z,1520562754.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:34.722Z,1520562754.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:35.130Z,1520562755.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:35.522Z,1520562755.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:35.925Z,1520562755.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:36.322Z,1520562756.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:36.722Z,1520562756.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:37.122Z,1520562757.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:37.530Z,1520562757.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:37.927Z,1520562757.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:38.330Z,1520562758.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:38.725Z,1520562758.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:39.128Z,1520562759.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:39.525Z,1520562759.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:39.929Z,1520562759.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:40.330Z,1520562760.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:40.729Z,1520562760.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:41.125Z,1520562761.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:41.539Z,1520562761.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:41.927Z,1520562761.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:42.329Z,1520562762.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:42.725Z,1520562762.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:43.129Z,1520562763.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:43.528Z,1520562763.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:43.935Z,1520562763.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:44.329Z,1520562764.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:44.725Z,1520562764.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:45.129Z,1520562765.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:45.529Z,1520562765.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:45.925Z,1520562765.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:46.329Z,1520562766.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:46.722Z,1520562766.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:47.133Z,1520562767.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:47.522Z,1520562767.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:47.922Z,1520562767.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:48.318Z,1520562768.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:48.739Z,1520562768.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:49.122Z,1520562769.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:49.522Z,1520562769.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:49.922Z,1520562769.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:50.333Z,1520562770.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:50.734Z,1520562770.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:51.121Z,1520562771.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:51.533Z,1520562771.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:51.934Z,1520562771.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:52.322Z,1520562772.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:52.718Z,1520562772.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:53.122Z,1520562773.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:53.542Z,1520562773.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:53.922Z,1520562773.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:54.322Z,1520562774.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:54.746Z,1520562774.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:55.118Z,1520562775.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:55.523Z,1520562775.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:55.922Z,1520562775.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:56.322Z,1520562776.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:56.722Z,1520562776.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:57.138Z,1520562777.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:57.518Z,1520562777.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:57.922Z,1520562777.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:58.338Z,1520562778.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:58.722Z,1520562778.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:59.122Z,1520562779.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:59.522Z,1520562779.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:32:59.918Z,1520562779.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:00.323Z,1520562780.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:00.722Z,1520562780.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:01.121Z,1520562781.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:01.522Z,1520562781.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:01.930Z,1520562781.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:02.330Z,1520562782.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:02.730Z,1520562782.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:03.130Z,1520562783.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:06.270Z,1520562786.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:06.385Z,1520562786.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:06.742Z,1520562786.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:07.141Z,1520562787.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:07.541Z,1520562787.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:07.950Z,1520562787.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:08.340Z,1520562788.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:08.738Z,1520562788.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:09.147Z,1520562789.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:09.543Z,1520562789.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:09.946Z,1520562789.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:10.342Z,1520562790.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:10.742Z,1520562790.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:11.142Z,1520562791.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:11.537Z,1520562791.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:11.946Z,1520562791.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:12.345Z,1520562792.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:12.737Z,1520562792.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:13.137Z,1520562793.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:13.530Z,1520562793.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:13.955Z,1520562793.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:14.330Z,1520562794.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:14.734Z,1520562794.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:15.134Z,1520562795.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:15.534Z,1520562795.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:15.931Z,1520562795.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:16.334Z,1520562796.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:16.734Z,1520562796.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:17.127Z,1520562797.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:17.534Z,1520562797.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:17.934Z,1520562797.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:18.342Z,1520562798.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:18.743Z,1520562798.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:19.140Z,1520562799.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:19.536Z,1520562799.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:19.945Z,1520562799.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:20.341Z,1520562800.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:20.741Z,1520562800.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:20.761Z,1520562800.761 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T02:33:20.761Z,1520562800.761 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 36
2018-03-09T02:33:20.761Z,1520562800.761 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T02:33:20.774Z,1520562800.774 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T02:33:21.137Z,1520562801.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:21.175Z,1520562801.175 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T02:33:21.175Z,1520562801.175 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 36
2018-03-09T02:33:21.555Z,1520562801.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:21.572Z,1520562801.572 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T02:33:21.573Z,1520562801.573 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T02:33:21.573Z,1520562801.573 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T02:33:21.942Z,1520562801.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:22.353Z,1520562802.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:22.742Z,1520562802.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:23.153Z,1520562803.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:23.537Z,1520562803.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:23.933Z,1520562803.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:24.334Z,1520562804.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:24.738Z,1520562804.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:25.134Z,1520562805.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:25.537Z,1520562805.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:25.942Z,1520562805.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:26.344Z,1520562806.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:26.738Z,1520562806.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:27.138Z,1520562807.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:27.541Z,1520562807.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:27.939Z,1520562807.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:28.351Z,1520562808.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:28.741Z,1520562808.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:29.127Z,1520562809.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:29.541Z,1520562809.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:29.941Z,1520562809.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:30.338Z,1520562810.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:30.751Z,1520562810.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:31.146Z,1520562811.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:31.530Z,1520562811.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:31.934Z,1520562811.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:32.334Z,1520562812.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:32.746Z,1520562812.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:33.134Z,1520562813.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:33.546Z,1520562813.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:33.934Z,1520562813.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:34.354Z,1520562814.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:34.738Z,1520562814.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:35.134Z,1520562815.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:35.534Z,1520562815.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:35.935Z,1520562815.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:36.346Z,1520562816.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:36.744Z,1520562816.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:37.138Z,1520562817.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:37.538Z,1520562817.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:37.940Z,1520562817.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:38.344Z,1520562818.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:38.736Z,1520562818.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:39.140Z,1520562819.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:39.537Z,1520562819.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:39.937Z,1520562819.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:40.346Z,1520562820.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:40.742Z,1520562820.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:41.143Z,1520562821.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:41.537Z,1520562821.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:41.933Z,1520562821.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:42.330Z,1520562822.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:42.736Z,1520562822.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:43.135Z,1520562823.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:43.536Z,1520562823.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:43.936Z,1520562823.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:44.335Z,1520562824.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:44.735Z,1520562824.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:45.150Z,1520562825.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:45.566Z,1520562825.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:45.934Z,1520562825.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:46.334Z,1520562826.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:46.736Z,1520562826.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:47.134Z,1520562827.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:47.547Z,1520562827.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:47.939Z,1520562827.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:48.334Z,1520562828.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:48.746Z,1520562828.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:49.159Z,1520562829.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:49.538Z,1520562829.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:49.934Z,1520562829.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:50.339Z,1520562830.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:50.739Z,1520562830.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:51.139Z,1520562831.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:51.534Z,1520562831.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:51.942Z,1520562831.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:52.339Z,1520562832.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:52.734Z,1520562832.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:53.131Z,1520562833.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:53.537Z,1520562833.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:53.930Z,1520562833.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:54.330Z,1520562834.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:54.733Z,1520562834.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:55.137Z,1520562835.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:55.534Z,1520562835.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:55.934Z,1520562835.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:56.330Z,1520562836.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:56.731Z,1520562836.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:57.134Z,1520562837.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:57.537Z,1520562837.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:57.927Z,1520562837.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:58.334Z,1520562838.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:58.737Z,1520562838.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:59.134Z,1520562839.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:59.538Z,1520562839.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:33:59.943Z,1520562839.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:00.342Z,1520562840.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:00.741Z,1520562840.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:01.144Z,1520562841.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:01.541Z,1520562841.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:01.944Z,1520562841.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:02.341Z,1520562842.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:02.737Z,1520562842.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:03.140Z,1520562843.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:06.338Z,1520562846.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:06.457Z,1520562846.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:06.811Z,1520562846.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:07.211Z,1520562847.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:07.614Z,1520562847.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:08.008Z,1520562848.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:08.402Z,1520562848.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:08.799Z,1520562848.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:09.202Z,1520562849.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:09.607Z,1520562849.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:10.003Z,1520562850.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:10.409Z,1520562850.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:10.802Z,1520562850.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:11.198Z,1520562851.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:11.602Z,1520562851.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:12.007Z,1520562852.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:12.406Z,1520562852.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:12.802Z,1520562852.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:13.202Z,1520562853.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:13.599Z,1520562853.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:14.002Z,1520562854.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:14.403Z,1520562854.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:14.803Z,1520562854.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:15.209Z,1520562855.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:15.614Z,1520562855.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:16.009Z,1520562856.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:16.404Z,1520562856.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:16.802Z,1520562856.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:17.206Z,1520562857.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:17.610Z,1520562857.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:18.008Z,1520562858.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:18.421Z,1520562858.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:18.802Z,1520562858.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:19.225Z,1520562859.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:19.605Z,1520562859.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:20.002Z,1520562860.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:20.406Z,1520562860.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:20.798Z,1520562860.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:21.202Z,1520562861.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:21.607Z,1520562861.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:22.009Z,1520562862.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:22.410Z,1520562862.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:22.805Z,1520562862.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:23.198Z,1520562863.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:23.602Z,1520562863.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:24.002Z,1520562864.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:24.402Z,1520562864.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:24.810Z,1520562864.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:25.218Z,1520562865.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:25.614Z,1520562865.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:26.026Z,1520562866.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:26.407Z,1520562866.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:26.803Z,1520562866.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:27.202Z,1520562867.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:27.603Z,1520562867.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:28.002Z,1520562868.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:28.403Z,1520562868.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:28.801Z,1520562868.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:29.203Z,1520562869.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:29.598Z,1520562869.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:29.999Z,1520562869.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:30.399Z,1520562870.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:30.798Z,1520562870.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:31.199Z,1520562871.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:31.610Z,1520562871.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:32.009Z,1520562872.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:32.413Z,1520562872.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:32.813Z,1520562872.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:33.210Z,1520562873.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:33.598Z,1520562873.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:34.002Z,1520562874.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:34.406Z,1520562874.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:34.799Z,1520562874.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:35.198Z,1520562875.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:35.602Z,1520562875.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:35.000Z,1520562876.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:36.402Z,1520562876.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:36.802Z,1520562876.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:37.195Z,1520562877.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:37.598Z,1520562877.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:38.003Z,1520562878.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:38.410Z,1520562878.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:38.814Z,1520562878.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:39.210Z,1520562879.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:39.613Z,1520562879.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:39.998Z,1520562879.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:40.409Z,1520562880.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:40.799Z,1520562880.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:41.213Z,1520562881.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:41.602Z,1520562881.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:41.995Z,1520562881.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:42.406Z,1520562882.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:42.806Z,1520562882.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:43.202Z,1520562883.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:43.602Z,1520562883.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:44.002Z,1520562884.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:44.398Z,1520562884.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:44.811Z,1520562884.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:45.202Z,1520562885.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:45.598Z,1520562885.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:46.002Z,1520562886.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:46.402Z,1520562886.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:46.799Z,1520562886.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:47.202Z,1520562887.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:47.606Z,1520562887.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:47.995Z,1520562887.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:48.410Z,1520562888.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:48.810Z,1520562888.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:49.198Z,1520562889.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:49.607Z,1520562889.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:50.026Z,1520562890.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:50.402Z,1520562890.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:50.806Z,1520562890.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:51.215Z,1520562891.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:51.614Z,1520562891.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:52.002Z,1520562892.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:52.402Z,1520562892.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:52.803Z,1520562892.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:53.208Z,1520562893.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:53.608Z,1520562893.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:54.001Z,1520562894.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:54.409Z,1520562894.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:54.814Z,1520562894.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:55.198Z,1520562895.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:55.617Z,1520562895.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:56.002Z,1520562896.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:56.402Z,1520562896.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:56.803Z,1520562896.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:57.207Z,1520562897.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:57.598Z,1520562897.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:58.003Z,1520562898.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:58.402Z,1520562898.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:58.802Z,1520562898.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:59.203Z,1520562899.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:34:59.606Z,1520562899.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:00.014Z,1520562900.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:00.414Z,1520562900.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:00.805Z,1520562900.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:01.216Z,1520562901.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:01.602Z,1520562901.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:02.003Z,1520562902.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:02.422Z,1520562902.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:02.797Z,1520562902.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:02.834Z,1520562902.834 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-09T02:35:02.834Z,1520562902.834 [Default:CheckIn:C.Wait] Stopped
2018-03-09T02:35:02.834Z,1520562902.834 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-09T02:35:02.834Z,1520562902.834 [Default:CheckIn:D] Running Loop=1
2018-03-09T02:35:03.226Z,1520562903.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:03.250Z,1520562903.250 [Default:CheckIn:D] Stopped
2018-03-09T02:35:03.250Z,1520562903.250 [Default:CheckIn:E] Running Loop=1
2018-03-09T02:35:06.580Z,1520562906.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:06.608Z,1520562906.608 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1129.307422 min 
2018-03-09T02:35:06.608Z,1520562906.608 [Default:CheckIn:E] Stopped
2018-03-09T02:35:06.609Z,1520562906.609 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-09T02:35:06.609Z,1520562906.609 [Default:CheckIn] Stopped
2018-03-09T02:35:06.609Z,1520562906.609 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-09T02:35:06.609Z,1520562906.609 [Default:CheckIn](INFO): Running loop #114
2018-03-09T02:35:06.609Z,1520562906.609 [Default:CheckIn] Running Loop=114
2018-03-09T02:35:06.609Z,1520562906.609 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-09T02:35:06.609Z,1520562906.609 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-09T02:35:06.721Z,1520562906.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:07.089Z,1520562907.089 [NAL9602](INFO): Powering up
2018-03-09T02:35:07.106Z,1520562907.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:07.499Z,1520562907.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:07.905Z,1520562907.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:08.303Z,1520562908.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:08.706Z,1520562908.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:09.101Z,1520562909.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:09.504Z,1520562909.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:09.905Z,1520562909.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:10.309Z,1520562910.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:10.705Z,1520562910.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:11.106Z,1520562911.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:11.508Z,1520562911.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:11.914Z,1520562911.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:12.295Z,1520562912.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:12.698Z,1520562912.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:13.098Z,1520562913.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:13.501Z,1520562913.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:13.902Z,1520562913.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:14.298Z,1520562914.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:14.698Z,1520562914.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:15.099Z,1520562915.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:15.498Z,1520562915.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:15.895Z,1520562915.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:16.298Z,1520562916.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:16.698Z,1520562916.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:17.095Z,1520562917.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:17.511Z,1520562917.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:17.931Z,1520562917.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:18.282Z,1520562918.282 [NAL9602](INFO): NAL9602 initialized
2018-03-09T02:35:18.298Z,1520562918.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:18.703Z,1520562918.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:19.126Z,1520562919.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:19.517Z,1520562919.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:19.909Z,1520562919.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:20.304Z,1520562920.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:20.699Z,1520562920.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:21.101Z,1520562921.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:21.507Z,1520562921.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:21.897Z,1520562921.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:22.309Z,1520562922.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:22.715Z,1520562922.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:23.095Z,1520562923.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:23.507Z,1520562923.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:23.903Z,1520562923.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:24.299Z,1520562924.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:24.698Z,1520562924.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:25.098Z,1520562925.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:25.494Z,1520562925.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:25.898Z,1520562925.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:26.298Z,1520562926.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:26.699Z,1520562926.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:27.098Z,1520562927.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:27.498Z,1520562927.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:27.902Z,1520562927.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:28.298Z,1520562928.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:28.698Z,1520562928.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:29.099Z,1520562929.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:29.503Z,1520562929.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:29.899Z,1520562929.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:30.306Z,1520562930.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:30.706Z,1520562930.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:31.107Z,1520562931.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:31.508Z,1520562931.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:31.905Z,1520562931.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:32.314Z,1520562932.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:32.706Z,1520562932.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:33.101Z,1520562933.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:33.505Z,1520562933.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:33.896Z,1520562933.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:34.308Z,1520562934.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:34.710Z,1520562934.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:35.097Z,1520562935.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:35.501Z,1520562935.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:35.901Z,1520562935.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:36.311Z,1520562936.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:36.694Z,1520562936.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:37.118Z,1520562937.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:37.509Z,1520562937.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:37.898Z,1520562937.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:38.320Z,1520562938.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:38.694Z,1520562938.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:39.098Z,1520562939.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:39.519Z,1520562939.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:39.897Z,1520562939.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:40.298Z,1520562940.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:40.698Z,1520562940.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:41.110Z,1520562941.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:41.494Z,1520562941.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:41.898Z,1520562941.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:42.294Z,1520562942.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:42.694Z,1520562942.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:43.099Z,1520562943.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:43.510Z,1520562943.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:43.898Z,1520562943.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:44.297Z,1520562944.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:44.698Z,1520562944.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:45.098Z,1520562945.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:45.500Z,1520562945.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:45.905Z,1520562945.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:46.307Z,1520562946.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:46.705Z,1520562946.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:47.097Z,1520562947.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:47.494Z,1520562947.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:47.899Z,1520562947.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:48.298Z,1520562948.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:48.700Z,1520562948.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:49.102Z,1520562949.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:49.494Z,1520562949.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:49.905Z,1520562949.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:50.282Z,1520562950.282 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-09T02:35:50.365Z,1520562950.365 [NAL9602](FAULT): received: 
+CSQ:0

OK12, 2, 0, 0, 0

OK
2018-03-09T02:35:50.365Z,1520562950.365 [NAL9602] Data Fault, FailCount= 4
2018-03-09T02:35:50.365Z,1520562950.365 [NAL9602](ERROR): Data Fault
2018-03-09T02:35:50.382Z,1520562950.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:50.450Z,1520562950.450 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-09T02:35:50.681Z,1520562950.681 [NAL9602](INFO): Powering down
2018-03-09T02:35:50.703Z,1520562950.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:51.103Z,1520562951.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:51.505Z,1520562951.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:51.554Z,1520562951.554 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-09T02:35:51.554Z,1520562951.554 [NAL9602] No Fault, FailCount= 4
2018-03-09T02:35:51.905Z,1520562951.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:52.309Z,1520562952.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:52.714Z,1520562952.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:53.105Z,1520562953.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:53.505Z,1520562953.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:53.904Z,1520562953.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:54.293Z,1520562954.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:54.702Z,1520562954.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:55.098Z,1520562955.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:55.501Z,1520562955.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:55.891Z,1520562955.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:56.298Z,1520562956.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:56.697Z,1520562956.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:57.102Z,1520562957.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:57.508Z,1520562957.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:57.907Z,1520562957.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:58.306Z,1520562958.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:58.706Z,1520562958.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:59.106Z,1520562959.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:59.500Z,1520562959.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:35:59.905Z,1520562959.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:00.302Z,1520562960.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:00.703Z,1520562960.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:01.112Z,1520562961.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:01.506Z,1520562961.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:01.904Z,1520562961.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:02.303Z,1520562962.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:02.711Z,1520562962.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:03.096Z,1520562963.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:03.508Z,1520562963.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:06.827Z,1520562966.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:06.948Z,1520562966.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:07.365Z,1520562967.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:07.746Z,1520562967.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:08.150Z,1520562968.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:08.554Z,1520562968.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:08.945Z,1520562968.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:09.348Z,1520562969.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:09.754Z,1520562969.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:10.154Z,1520562970.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:10.554Z,1520562970.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:10.949Z,1520562970.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:11.358Z,1520562971.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:11.753Z,1520562971.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:12.162Z,1520562972.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:12.553Z,1520562972.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:12.955Z,1520562972.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:13.363Z,1520562973.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:13.757Z,1520562973.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:14.154Z,1520562974.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:14.556Z,1520562974.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:14.957Z,1520562974.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:15.355Z,1520562975.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:15.758Z,1520562975.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:16.153Z,1520562976.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:16.553Z,1520562976.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:16.953Z,1520562976.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:17.353Z,1520562977.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:17.754Z,1520562977.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:18.154Z,1520562978.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:18.546Z,1520562978.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:18.958Z,1520562978.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:19.353Z,1520562979.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:19.753Z,1520562979.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:20.146Z,1520562980.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:20.550Z,1520562980.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:20.934Z,1520562980.934 [NAL9602](INFO): Powering up NAL9602
2018-03-09T02:36:20.951Z,1520562980.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:21.343Z,1520562981.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:21.751Z,1520562981.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:21.770Z,1520562981.770 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T02:36:21.770Z,1520562981.770 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 37
2018-03-09T02:36:21.770Z,1520562981.770 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T02:36:21.783Z,1520562981.783 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T02:36:22.149Z,1520562982.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:22.178Z,1520562982.178 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T02:36:22.178Z,1520562982.178 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 37
2018-03-09T02:36:22.551Z,1520562982.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:22.569Z,1520562982.569 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T02:36:22.569Z,1520562982.569 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T02:36:22.570Z,1520562982.570 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T02:36:22.954Z,1520562982.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:23.353Z,1520562983.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:23.776Z,1520562983.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:24.152Z,1520562984.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:24.548Z,1520562984.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:24.950Z,1520562984.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:25.356Z,1520562985.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:25.763Z,1520562985.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:26.146Z,1520562986.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:26.550Z,1520562986.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:26.949Z,1520562986.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:27.350Z,1520562987.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:27.759Z,1520562987.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:28.154Z,1520562988.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:28.557Z,1520562988.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:28.960Z,1520562988.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:29.354Z,1520562989.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:29.754Z,1520562989.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:30.157Z,1520562990.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:30.558Z,1520562990.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:30.950Z,1520562990.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:31.357Z,1520562991.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:31.764Z,1520562991.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:32.133Z,1520562992.133 [NAL9602](INFO): NAL9602 initialized
2018-03-09T02:36:32.162Z,1520562992.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:32.560Z,1520562992.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:32.965Z,1520562992.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:33.364Z,1520562993.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:33.773Z,1520562993.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:34.146Z,1520562994.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:34.551Z,1520562994.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:34.951Z,1520562994.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:35.357Z,1520562995.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:35.757Z,1520562995.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:36.170Z,1520562996.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:36.546Z,1520562996.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:36.946Z,1520562996.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:37.350Z,1520562997.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:37.749Z,1520562997.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:38.154Z,1520562998.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:38.550Z,1520562998.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:38.958Z,1520562998.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:39.354Z,1520562999.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:39.773Z,1520562999.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:40.173Z,1520563000.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:40.555Z,1520563000.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:40.966Z,1520563000.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:41.355Z,1520563001.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:41.757Z,1520563001.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:42.158Z,1520563002.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:42.559Z,1520563002.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:42.957Z,1520563002.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:43.358Z,1520563003.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:43.756Z,1520563003.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:44.165Z,1520563004.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:44.565Z,1520563004.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:44.953Z,1520563004.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:45.354Z,1520563005.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:45.758Z,1520563005.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:46.154Z,1520563006.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:46.554Z,1520563006.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:46.967Z,1520563006.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:47.356Z,1520563007.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:47.758Z,1520563007.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:48.158Z,1520563008.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:48.557Z,1520563008.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:48.960Z,1520563008.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:49.358Z,1520563009.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:49.753Z,1520563009.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:50.146Z,1520563010.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:50.562Z,1520563010.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:50.954Z,1520563010.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:51.346Z,1520563011.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:51.753Z,1520563011.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:52.150Z,1520563012.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:52.569Z,1520563012.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:52.970Z,1520563012.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:53.350Z,1520563013.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:53.758Z,1520563013.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:54.150Z,1520563014.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:54.550Z,1520563014.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:54.946Z,1520563014.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:55.350Z,1520563015.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:55.752Z,1520563015.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:56.150Z,1520563016.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:56.550Z,1520563016.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:56.969Z,1520563016.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:57.369Z,1520563017.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:57.756Z,1520563017.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:58.155Z,1520563018.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:58.558Z,1520563018.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:58.958Z,1520563018.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:59.359Z,1520563019.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:36:59.754Z,1520563019.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:00.164Z,1520563020.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:00.557Z,1520563020.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:00.958Z,1520563020.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:01.381Z,1520563021.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:01.769Z,1520563021.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:02.168Z,1520563022.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:02.571Z,1520563022.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:02.963Z,1520563022.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:03.362Z,1520563023.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:03.759Z,1520563023.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:07.033Z,1520563027.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:07.189Z,1520563027.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:07.537Z,1520563027.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:07.941Z,1520563027.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:08.327Z,1520563028.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:08.727Z,1520563028.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:09.136Z,1520563029.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:09.521Z,1520563029.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:09.927Z,1520563029.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:10.325Z,1520563030.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:10.722Z,1520563030.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:11.126Z,1520563031.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:11.530Z,1520563031.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:11.936Z,1520563031.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:12.336Z,1520563032.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:12.741Z,1520563032.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:13.131Z,1520563033.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:13.539Z,1520563033.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:13.918Z,1520563033.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:14.322Z,1520563034.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:14.718Z,1520563034.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:15.118Z,1520563035.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:15.518Z,1520563035.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:15.939Z,1520563035.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:16.319Z,1520563036.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:16.723Z,1520563036.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:17.135Z,1520563037.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:17.542Z,1520563037.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:17.933Z,1520563037.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:18.337Z,1520563038.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:18.719Z,1520563038.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:19.118Z,1520563039.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:19.538Z,1520563039.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:19.922Z,1520563039.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:20.318Z,1520563040.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:20.718Z,1520563040.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:21.116Z,1520563041.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:21.518Z,1520563041.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:21.951Z,1520563041.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:22.326Z,1520563042.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:22.723Z,1520563042.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:23.129Z,1520563043.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:23.546Z,1520563043.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:23.929Z,1520563043.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:24.330Z,1520563044.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:24.722Z,1520563044.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:25.118Z,1520563045.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:25.523Z,1520563045.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:25.915Z,1520563045.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:26.334Z,1520563046.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:26.727Z,1520563046.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:27.126Z,1520563047.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:27.525Z,1520563047.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:27.930Z,1520563047.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:28.333Z,1520563048.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:28.749Z,1520563048.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:29.141Z,1520563049.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:29.540Z,1520563049.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:29.930Z,1520563049.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:30.319Z,1520563050.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:30.714Z,1520563050.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:31.118Z,1520563051.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:31.518Z,1520563051.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:31.914Z,1520563051.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:32.318Z,1520563052.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:32.718Z,1520563052.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:33.117Z,1520563053.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:33.537Z,1520563053.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:33.944Z,1520563053.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:34.342Z,1520563054.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:34.736Z,1520563054.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:35.139Z,1520563055.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:35.514Z,1520563055.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:35.918Z,1520563055.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:36.339Z,1520563056.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:36.729Z,1520563056.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:37.118Z,1520563057.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:37.522Z,1520563057.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:37.912Z,1520563057.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:38.318Z,1520563058.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:38.729Z,1520563058.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:39.129Z,1520563059.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:39.537Z,1520563059.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:39.952Z,1520563059.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:40.322Z,1520563060.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:40.730Z,1520563060.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:41.128Z,1520563061.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:41.527Z,1520563061.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:41.929Z,1520563061.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:42.340Z,1520563062.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:42.729Z,1520563062.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:43.125Z,1520563063.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:43.519Z,1520563063.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:43.948Z,1520563063.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:44.347Z,1520563064.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:44.739Z,1520563064.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:45.139Z,1520563065.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:45.518Z,1520563065.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:45.926Z,1520563065.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:46.327Z,1520563066.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:46.734Z,1520563066.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:47.126Z,1520563067.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:47.526Z,1520563067.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:47.932Z,1520563067.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:48.323Z,1520563068.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:48.717Z,1520563068.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:49.141Z,1520563069.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:49.538Z,1520563069.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:49.937Z,1520563069.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:50.343Z,1520563070.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:50.718Z,1520563070.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:51.114Z,1520563071.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:51.533Z,1520563071.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:51.918Z,1520563071.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:52.313Z,1520563072.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:52.722Z,1520563072.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:53.119Z,1520563073.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:53.520Z,1520563073.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:53.923Z,1520563073.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:54.329Z,1520563074.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:54.730Z,1520563074.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:55.137Z,1520563075.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:55.542Z,1520563075.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:55.924Z,1520563075.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:56.328Z,1520563076.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:56.726Z,1520563076.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:57.113Z,1520563077.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:57.531Z,1520563077.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:57.918Z,1520563077.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:58.331Z,1520563078.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:58.718Z,1520563078.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:59.132Z,1520563079.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:59.532Z,1520563079.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:37:59.941Z,1520563079.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:00.350Z,1520563080.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:00.726Z,1520563080.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:01.125Z,1520563081.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:01.528Z,1520563081.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:01.927Z,1520563081.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:02.323Z,1520563082.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:02.734Z,1520563082.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:03.128Z,1520563083.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:03.521Z,1520563083.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:03.923Z,1520563083.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:07.104Z,1520563087.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:07.257Z,1520563087.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:07.617Z,1520563087.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:08.005Z,1520563088.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:08.397Z,1520563088.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:08.795Z,1520563088.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:09.190Z,1520563089.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:09.590Z,1520563089.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:09.990Z,1520563089.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:10.395Z,1520563090.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:10.798Z,1520563090.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:11.199Z,1520563091.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:11.595Z,1520563091.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:12.005Z,1520563092.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:12.417Z,1520563092.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:12.808Z,1520563092.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:13.209Z,1520563093.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:13.590Z,1520563093.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:14.010Z,1520563094.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:14.386Z,1520563094.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:14.789Z,1520563094.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:15.195Z,1520563095.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:15.598Z,1520563095.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:16.003Z,1520563096.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:16.393Z,1520563096.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:16.786Z,1520563096.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:17.221Z,1520563097.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:17.613Z,1520563097.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:18.010Z,1520563098.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:18.409Z,1520563098.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:18.791Z,1520563098.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:19.190Z,1520563099.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:19.592Z,1520563099.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:19.995Z,1520563099.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:20.402Z,1520563100.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:20.811Z,1520563100.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:21.202Z,1520563101.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:21.590Z,1520563101.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:22.010Z,1520563102.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:22.412Z,1520563102.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:22.801Z,1520563102.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:23.224Z,1520563103.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:23.605Z,1520563103.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:24.002Z,1520563104.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:24.399Z,1520563104.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:24.794Z,1520563104.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:25.198Z,1520563105.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:25.595Z,1520563105.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:25.989Z,1520563105.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:26.386Z,1520563106.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:26.795Z,1520563106.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:27.191Z,1520563107.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:27.601Z,1520563107.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:28.005Z,1520563108.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:28.401Z,1520563108.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:28.801Z,1520563108.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:29.194Z,1520563109.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:29.599Z,1520563109.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:29.994Z,1520563109.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:30.393Z,1520563110.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:30.790Z,1520563110.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:31.187Z,1520563111.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:31.591Z,1520563111.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:31.990Z,1520563111.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:32.391Z,1520563112.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:32.813Z,1520563112.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:33.209Z,1520563113.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:33.613Z,1520563113.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:34.013Z,1520563114.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:34.403Z,1520563114.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:34.799Z,1520563114.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:35.198Z,1520563115.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:35.598Z,1520563115.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:35.990Z,1520563115.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:36.392Z,1520563116.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:36.785Z,1520563116.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:37.186Z,1520563117.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:37.590Z,1520563117.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:38.013Z,1520563118.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:38.401Z,1520563118.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:38.824Z,1520563118.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:39.210Z,1520563119.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:39.598Z,1520563119.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:39.999Z,1520563119.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:40.396Z,1520563120.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:40.799Z,1520563120.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:41.199Z,1520563121.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:41.597Z,1520563121.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:41.986Z,1520563121.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:42.411Z,1520563122.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:42.789Z,1520563122.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:43.197Z,1520563123.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:43.621Z,1520563123.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:44.009Z,1520563124.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:44.409Z,1520563124.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:44.794Z,1520563124.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:45.197Z,1520563125.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:45.587Z,1520563125.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:45.995Z,1520563125.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:46.391Z,1520563126.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:46.786Z,1520563126.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:47.190Z,1520563127.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:47.585Z,1520563127.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:47.990Z,1520563127.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:48.409Z,1520563128.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:48.810Z,1520563128.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:49.213Z,1520563129.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:49.605Z,1520563129.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:50.002Z,1520563130.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:50.390Z,1520563130.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:50.802Z,1520563130.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:51.192Z,1520563131.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:51.595Z,1520563131.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:51.998Z,1520563131.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:52.395Z,1520563132.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:52.795Z,1520563132.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:53.195Z,1520563133.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:53.610Z,1520563133.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:54.005Z,1520563134.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:54.417Z,1520563134.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:54.805Z,1520563134.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:55.198Z,1520563135.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:55.598Z,1520563135.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:55.990Z,1520563135.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:56.395Z,1520563136.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:56.798Z,1520563136.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:57.199Z,1520563137.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:57.602Z,1520563137.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:57.998Z,1520563137.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:58.394Z,1520563138.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:58.797Z,1520563138.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:59.213Z,1520563139.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:38:59.614Z,1520563139.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:00.001Z,1520563140.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:00.398Z,1520563140.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:00.798Z,1520563140.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:01.195Z,1520563141.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:01.601Z,1520563141.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:01.995Z,1520563141.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:02.398Z,1520563142.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:02.799Z,1520563142.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:03.194Z,1520563143.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:03.590Z,1520563143.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:04.023Z,1520563144.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:07.185Z,1520563147.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:07.336Z,1520563147.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:07.677Z,1520563147.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:08.065Z,1520563148.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:08.461Z,1520563148.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:08.861Z,1520563148.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:09.259Z,1520563149.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:09.654Z,1520563149.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:10.061Z,1520563150.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:10.461Z,1520563150.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:10.848Z,1520563150.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:11.256Z,1520563151.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:11.700Z,1520563151.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:12.083Z,1520563152.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:12.495Z,1520563152.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:12.867Z,1520563152.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:13.246Z,1520563153.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:13.653Z,1520563153.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:14.055Z,1520563154.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:14.452Z,1520563154.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:14.861Z,1520563154.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:15.261Z,1520563155.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:15.658Z,1520563155.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:16.061Z,1520563156.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:16.461Z,1520563156.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:16.880Z,1520563156.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:17.296Z,1520563157.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:17.665Z,1520563157.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:18.063Z,1520563158.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:18.460Z,1520563158.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:18.865Z,1520563158.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:19.255Z,1520563159.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:19.665Z,1520563159.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:20.064Z,1520563160.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:20.453Z,1520563160.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:20.867Z,1520563160.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:21.266Z,1520563161.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:21.663Z,1520563161.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:22.085Z,1520563162.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:22.486Z,1520563162.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:22.865Z,1520563162.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:22.910Z,1520563162.910 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T02:39:22.910Z,1520563162.910 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 38
2018-03-09T02:39:22.911Z,1520563162.911 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T02:39:22.935Z,1520563162.935 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T02:39:23.278Z,1520563163.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:23.307Z,1520563163.307 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T02:39:23.307Z,1520563163.307 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 38
2018-03-09T02:39:23.659Z,1520563163.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:23.695Z,1520563163.695 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T02:39:23.696Z,1520563163.696 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T02:39:23.696Z,1520563163.696 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T02:39:24.062Z,1520563164.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:24.465Z,1520563164.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:24.859Z,1520563164.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:25.263Z,1520563165.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:25.659Z,1520563165.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:26.061Z,1520563166.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:26.466Z,1520563166.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:26.856Z,1520563166.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:27.266Z,1520563167.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:27.660Z,1520563167.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:28.093Z,1520563168.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:28.483Z,1520563168.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:28.852Z,1520563168.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:29.264Z,1520563169.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:29.658Z,1520563169.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:30.058Z,1520563170.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:30.455Z,1520563170.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:30.865Z,1520563170.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:31.259Z,1520563171.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:31.660Z,1520563171.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:32.068Z,1520563172.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:32.467Z,1520563172.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:32.868Z,1520563172.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:33.284Z,1520563173.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:33.691Z,1520563173.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:34.060Z,1520563174.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:34.462Z,1520563174.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:34.858Z,1520563174.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:35.266Z,1520563175.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:35.653Z,1520563175.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:36.058Z,1520563176.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:36.459Z,1520563176.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:36.859Z,1520563176.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:37.250Z,1520563177.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:37.677Z,1520563177.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:38.076Z,1520563178.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:38.477Z,1520563178.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:38.868Z,1520563178.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:39.249Z,1520563179.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:39.649Z,1520563179.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:40.053Z,1520563180.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:40.464Z,1520563180.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:40.859Z,1520563180.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:41.262Z,1520563181.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:41.657Z,1520563181.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:42.050Z,1520563182.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:42.502Z,1520563182.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:42.882Z,1520563182.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:43.267Z,1520563183.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:43.699Z,1520563183.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:44.077Z,1520563184.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:44.466Z,1520563184.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:44.861Z,1520563184.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:45.253Z,1520563185.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:45.660Z,1520563185.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:46.061Z,1520563186.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:46.462Z,1520563186.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:46.876Z,1520563186.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:47.297Z,1520563187.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:47.650Z,1520563187.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:48.081Z,1520563188.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:48.466Z,1520563188.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:48.861Z,1520563188.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:49.301Z,1520563189.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:49.661Z,1520563189.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:50.061Z,1520563190.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:50.462Z,1520563190.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:50.861Z,1520563190.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:51.262Z,1520563191.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:51.661Z,1520563191.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:52.065Z,1520563192.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:52.463Z,1520563192.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:52.865Z,1520563192.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:53.271Z,1520563193.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:53.693Z,1520563193.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:54.070Z,1520563194.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:54.505Z,1520563194.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:54.862Z,1520563194.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:55.263Z,1520563195.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:55.663Z,1520563195.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:56.057Z,1520563196.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:56.454Z,1520563196.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:56.872Z,1520563196.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:57.251Z,1520563197.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:57.651Z,1520563197.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:58.055Z,1520563198.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:58.487Z,1520563198.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:58.865Z,1520563198.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:59.265Z,1520563199.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:39:59.665Z,1520563199.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:00.053Z,1520563200.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:00.454Z,1520563200.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:00.859Z,1520563200.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:01.264Z,1520563201.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:01.656Z,1520563201.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:02.062Z,1520563202.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:02.455Z,1520563202.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:02.859Z,1520563202.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:03.265Z,1520563203.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:03.688Z,1520563203.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:04.079Z,1520563204.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:04.509Z,1520563204.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:07.656Z,1520563207.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:07.701Z,1520563207.701 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-09T02:35:06.6Z
2018-03-09T02:40:07.701Z,1520563207.701 [Default:CheckIn:Read_GPS] Stopped
2018-03-09T02:40:07.701Z,1520563207.701 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-09T02:40:07.791Z,1520563207.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:08.282Z,1520563208.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:08.592Z,1520563208.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:08.993Z,1520563208.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:09.386Z,1520563209.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:12.642Z,1520563212.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:12.769Z,1520563212.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:13.114Z,1520563213.114 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20180308T074127/Courier0456.lzma
2018-03-09T02:40:13.151Z,1520563213.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:13.540Z,1520563213.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:13.905Z,1520563213.905 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0456.lzma.bak
2018-03-09T02:40:13.905Z,1520563213.905 [DataOverHttps](INFO): SBD MOMSN=7991528
2018-03-09T02:40:13.957Z,1520563213.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:14.542Z,1520563214.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:14.753Z,1520563214.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:15.130Z,1520563215.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:18.468Z,1520563218.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:18.613Z,1520563218.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:18.977Z,1520563218.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:19.361Z,1520563219.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:19.766Z,1520563219.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:20.163Z,1520563220.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:20.559Z,1520563220.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:23.800Z,1520563223.800 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-09T02:40:23.816Z,1520563223.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:23.938Z,1520563223.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:24.289Z,1520563224.289 [DataOverHttps](INFO): Sending 236 bytes from file Logs/20180308T074127/Express0457.lzma
2018-03-09T02:40:24.317Z,1520563224.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:24.710Z,1520563224.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:25.097Z,1520563225.097 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0457.lzma.bak
2018-03-09T02:40:25.101Z,1520563225.101 [DataOverHttps](INFO): SBD MOMSN=7991530
2018-03-09T02:40:25.162Z,1520563225.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:25.739Z,1520563225.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:25.779Z,1520563225.779 [Default:CheckIn:Read_Iridium] Stopped
2018-03-09T02:40:25.779Z,1520563225.779 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-09T02:40:25.779Z,1520563225.779 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-09T02:40:25.914Z,1520563225.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:29.040Z,1520563229.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:29.156Z,1520563229.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:29.543Z,1520563229.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:29.942Z,1520563229.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:30.341Z,1520563230.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:30.739Z,1520563230.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:31.139Z,1520563231.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:31.538Z,1520563231.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:31.938Z,1520563231.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:32.338Z,1520563232.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:32.741Z,1520563232.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:33.136Z,1520563233.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:33.541Z,1520563233.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:33.935Z,1520563233.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:34.342Z,1520563234.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:34.737Z,1520563234.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:35.135Z,1520563235.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:35.533Z,1520563235.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:35.941Z,1520563235.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:36.339Z,1520563236.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:36.733Z,1520563236.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:37.138Z,1520563237.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:37.537Z,1520563237.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:37.933Z,1520563237.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:38.330Z,1520563238.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:38.730Z,1520563238.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:39.134Z,1520563239.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:39.530Z,1520563239.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:39.927Z,1520563239.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:40.330Z,1520563240.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:40.733Z,1520563240.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:41.134Z,1520563241.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:41.538Z,1520563241.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:41.949Z,1520563241.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:42.331Z,1520563242.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:42.731Z,1520563242.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:43.129Z,1520563243.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:43.531Z,1520563243.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:43.930Z,1520563243.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:44.330Z,1520563244.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:44.728Z,1520563244.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:45.130Z,1520563245.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:45.530Z,1520563245.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:45.930Z,1520563245.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:46.330Z,1520563246.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:46.730Z,1520563246.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:47.126Z,1520563247.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:47.532Z,1520563247.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:47.939Z,1520563247.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:48.337Z,1520563248.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:48.738Z,1520563248.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:49.136Z,1520563249.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:49.536Z,1520563249.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:49.947Z,1520563249.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:50.337Z,1520563250.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:50.737Z,1520563250.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:51.139Z,1520563251.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:51.536Z,1520563251.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:51.937Z,1520563251.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:52.337Z,1520563252.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:52.737Z,1520563252.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:53.137Z,1520563253.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:53.533Z,1520563253.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:53.937Z,1520563253.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:54.313Z,1520563254.313 [NAL9602](INFO): Powering down
2018-03-09T02:40:54.352Z,1520563254.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:54.733Z,1520563254.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:55.141Z,1520563255.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:55.527Z,1520563255.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:55.930Z,1520563255.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:56.333Z,1520563256.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:56.730Z,1520563256.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:57.134Z,1520563257.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:57.541Z,1520563257.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:57.927Z,1520563257.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:58.338Z,1520563258.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:58.734Z,1520563258.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:59.130Z,1520563259.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:59.535Z,1520563259.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:40:59.938Z,1520563259.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:00.339Z,1520563260.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:00.736Z,1520563260.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:01.137Z,1520563261.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:01.538Z,1520563261.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:01.936Z,1520563261.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:02.338Z,1520563262.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:02.737Z,1520563262.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:03.133Z,1520563263.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:03.537Z,1520563263.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:03.935Z,1520563263.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:04.343Z,1520563264.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:04.737Z,1520563264.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:05.136Z,1520563265.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:05.538Z,1520563265.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:05.938Z,1520563265.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:06.340Z,1520563266.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:06.739Z,1520563266.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:07.139Z,1520563267.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:07.540Z,1520563267.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:07.943Z,1520563267.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:08.338Z,1520563268.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:08.743Z,1520563268.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:09.147Z,1520563269.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:09.530Z,1520563269.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:09.927Z,1520563269.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:10.329Z,1520563270.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:10.730Z,1520563270.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:11.130Z,1520563271.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:11.530Z,1520563271.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:11.930Z,1520563271.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:12.334Z,1520563272.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:12.730Z,1520563272.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:13.130Z,1520563273.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:13.530Z,1520563273.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:13.930Z,1520563273.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:14.329Z,1520563274.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:14.730Z,1520563274.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:15.130Z,1520563275.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:15.530Z,1520563275.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:15.927Z,1520563275.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:16.333Z,1520563276.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:16.733Z,1520563276.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:17.130Z,1520563277.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:17.530Z,1520563277.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:17.929Z,1520563277.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:18.334Z,1520563278.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:18.730Z,1520563278.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:19.130Z,1520563279.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:19.530Z,1520563279.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:19.930Z,1520563279.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:20.330Z,1520563280.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:20.734Z,1520563280.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:21.130Z,1520563281.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:21.529Z,1520563281.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:21.927Z,1520563281.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:22.329Z,1520563282.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:22.733Z,1520563282.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:23.127Z,1520563283.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:23.533Z,1520563283.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:23.930Z,1520563283.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:24.334Z,1520563284.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:24.730Z,1520563284.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:25.133Z,1520563285.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:25.534Z,1520563285.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:25.941Z,1520563285.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:26.334Z,1520563286.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:29.512Z,1520563289.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:29.628Z,1520563289.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:29.983Z,1520563289.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:30.377Z,1520563290.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:30.782Z,1520563290.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:31.178Z,1520563291.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:31.582Z,1520563291.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:31.974Z,1520563291.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:32.391Z,1520563292.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:32.778Z,1520563292.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:33.174Z,1520563293.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:33.579Z,1520563293.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:33.978Z,1520563293.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:34.380Z,1520563294.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:34.780Z,1520563294.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:35.178Z,1520563295.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:35.581Z,1520563295.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:35.977Z,1520563295.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:36.377Z,1520563296.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:36.777Z,1520563296.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:37.176Z,1520563297.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:37.582Z,1520563297.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:37.971Z,1520563297.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:38.393Z,1520563298.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:38.770Z,1520563298.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:39.172Z,1520563299.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:39.574Z,1520563299.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:39.979Z,1520563299.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:40.382Z,1520563300.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:40.796Z,1520563300.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:41.195Z,1520563301.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:41.582Z,1520563301.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:41.988Z,1520563301.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:42.375Z,1520563302.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:42.775Z,1520563302.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:43.179Z,1520563303.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:43.578Z,1520563303.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:43.983Z,1520563303.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:44.390Z,1520563304.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:44.783Z,1520563304.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:45.182Z,1520563305.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:45.574Z,1520563305.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:45.974Z,1520563305.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:46.385Z,1520563306.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:46.790Z,1520563306.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:47.185Z,1520563307.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:47.578Z,1520563307.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:47.990Z,1520563307.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:48.380Z,1520563308.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:48.782Z,1520563308.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:49.194Z,1520563309.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:49.585Z,1520563309.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:49.980Z,1520563309.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:50.382Z,1520563310.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:50.782Z,1520563310.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:51.181Z,1520563311.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:51.582Z,1520563311.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:51.981Z,1520563311.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:52.382Z,1520563312.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:52.774Z,1520563312.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:53.174Z,1520563313.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:53.580Z,1520563313.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:53.986Z,1520563313.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:54.378Z,1520563314.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:54.777Z,1520563314.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:55.181Z,1520563315.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:55.588Z,1520563315.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:55.979Z,1520563315.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:56.374Z,1520563316.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:56.774Z,1520563316.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:57.171Z,1520563317.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:57.578Z,1520563317.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:57.982Z,1520563317.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:58.379Z,1520563318.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:58.790Z,1520563318.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:59.184Z,1520563319.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:59.581Z,1520563319.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:41:59.981Z,1520563319.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:00.386Z,1520563320.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:00.779Z,1520563320.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:01.181Z,1520563321.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:01.585Z,1520563321.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:01.972Z,1520563321.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:02.374Z,1520563322.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:02.797Z,1520563322.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:03.167Z,1520563323.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:03.573Z,1520563323.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:03.970Z,1520563323.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:04.378Z,1520563324.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:04.774Z,1520563324.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:05.177Z,1520563325.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:05.579Z,1520563325.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:05.979Z,1520563325.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:06.377Z,1520563326.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:06.782Z,1520563326.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:07.190Z,1520563327.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:07.579Z,1520563327.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:07.979Z,1520563327.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:08.380Z,1520563328.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:08.780Z,1520563328.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:08.845Z,1520563328.845 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-09T02:42:09.175Z,1520563329.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:09.581Z,1520563329.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:09.980Z,1520563329.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:10.374Z,1520563330.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:10.778Z,1520563330.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:11.182Z,1520563331.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:11.582Z,1520563331.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:11.983Z,1520563331.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:12.381Z,1520563332.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:12.781Z,1520563332.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:13.177Z,1520563333.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:13.580Z,1520563333.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:13.978Z,1520563333.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:14.381Z,1520563334.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:14.786Z,1520563334.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:15.182Z,1520563335.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:15.581Z,1520563335.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:15.986Z,1520563335.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:16.370Z,1520563336.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:16.770Z,1520563336.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:17.178Z,1520563337.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:17.574Z,1520563337.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:17.973Z,1520563337.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:18.390Z,1520563338.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:18.780Z,1520563338.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:19.178Z,1520563339.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:19.582Z,1520563339.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:19.978Z,1520563339.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:20.383Z,1520563340.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:20.781Z,1520563340.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:21.178Z,1520563341.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:21.583Z,1520563341.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:21.654Z,1520563341.654 [CBIT](INFO): Clearing failed state for component DropWeight
2018-03-09T02:42:21.654Z,1520563341.654 [DropWeight] No Fault, FailCount= 1
2018-03-09T02:42:21.978Z,1520563341.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:22.370Z,1520563342.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:22.774Z,1520563342.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:23.174Z,1520563343.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:23.575Z,1520563343.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:23.974Z,1520563343.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:24.012Z,1520563344.012 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T02:42:24.013Z,1520563344.013 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 39
2018-03-09T02:42:24.013Z,1520563344.013 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T02:42:24.032Z,1520563344.032 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T02:42:24.381Z,1520563344.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:24.427Z,1520563344.427 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T02:42:24.427Z,1520563344.427 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 39
2018-03-09T02:42:24.779Z,1520563344.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:24.796Z,1520563344.796 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T02:42:24.797Z,1520563344.797 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T02:42:24.797Z,1520563344.797 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T02:42:25.184Z,1520563345.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:25.584Z,1520563345.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:25.982Z,1520563345.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:26.384Z,1520563346.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:29.591Z,1520563349.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:29.717Z,1520563349.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:30.106Z,1520563350.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:30.503Z,1520563350.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:30.912Z,1520563350.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:31.306Z,1520563351.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:31.727Z,1520563351.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:32.087Z,1520563352.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:32.539Z,1520563352.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:32.921Z,1520563352.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:33.306Z,1520563353.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:33.720Z,1520563353.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:34.119Z,1520563354.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:34.525Z,1520563354.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:34.922Z,1520563354.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:35.317Z,1520563355.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:35.706Z,1520563355.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:36.103Z,1520563356.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:36.499Z,1520563356.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:36.910Z,1520563356.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:37.309Z,1520563357.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:37.698Z,1520563357.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:38.098Z,1520563358.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:38.495Z,1520563358.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:38.938Z,1520563358.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:39.300Z,1520563359.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:39.749Z,1520563359.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:40.125Z,1520563360.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:40.514Z,1520563360.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:40.920Z,1520563360.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:41.323Z,1520563361.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:41.704Z,1520563361.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:42.116Z,1520563362.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:42.507Z,1520563362.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:42.912Z,1520563362.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:43.307Z,1520563363.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:43.710Z,1520563363.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:44.112Z,1520563364.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:44.508Z,1520563364.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:44.890Z,1520563364.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:45.298Z,1520563365.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:45.743Z,1520563365.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:46.088Z,1520563366.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:46.542Z,1520563366.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:46.921Z,1520563366.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:47.299Z,1520563367.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:47.718Z,1520563367.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:48.130Z,1520563368.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:48.527Z,1520563368.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:48.907Z,1520563368.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:49.326Z,1520563369.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:49.703Z,1520563369.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:50.105Z,1520563370.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:50.499Z,1520563370.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:50.903Z,1520563370.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:51.305Z,1520563371.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:51.702Z,1520563371.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:52.094Z,1520563372.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:52.502Z,1520563372.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:52.943Z,1520563372.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:53.291Z,1520563373.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:53.733Z,1520563373.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:54.107Z,1520563374.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:54.506Z,1520563374.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:54.918Z,1520563374.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:55.323Z,1520563375.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:55.722Z,1520563375.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:56.106Z,1520563376.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:56.516Z,1520563376.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:56.901Z,1520563376.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:57.309Z,1520563377.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:57.703Z,1520563377.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:58.103Z,1520563378.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:58.509Z,1520563378.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:58.907Z,1520563378.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:59.298Z,1520563379.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:42:59.703Z,1520563379.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:00.125Z,1520563380.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:00.497Z,1520563380.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:00.930Z,1520563380.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:01.311Z,1520563381.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:01.715Z,1520563381.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:02.115Z,1520563382.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:02.526Z,1520563382.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:02.922Z,1520563382.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:03.318Z,1520563383.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:03.726Z,1520563383.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:04.102Z,1520563384.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:04.502Z,1520563384.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:04.898Z,1520563384.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:05.314Z,1520563385.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:05.701Z,1520563385.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:06.097Z,1520563386.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:06.499Z,1520563386.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:06.898Z,1520563386.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:07.334Z,1520563387.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:07.694Z,1520563387.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:08.129Z,1520563388.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:08.507Z,1520563388.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:08.907Z,1520563388.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:09.312Z,1520563389.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:09.719Z,1520563389.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:10.128Z,1520563390.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:10.508Z,1520563390.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:10.918Z,1520563390.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:11.309Z,1520563391.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:11.709Z,1520563391.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:12.110Z,1520563392.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:12.503Z,1520563392.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:12.904Z,1520563392.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:13.307Z,1520563393.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:13.702Z,1520563393.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:14.089Z,1520563394.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:14.541Z,1520563394.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:14.906Z,1520563394.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:15.354Z,1520563395.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:15.719Z,1520563395.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:16.109Z,1520563396.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:16.512Z,1520563396.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:16.920Z,1520563396.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:17.309Z,1520563397.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:17.709Z,1520563397.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:18.120Z,1520563398.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:18.523Z,1520563398.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:18.897Z,1520563398.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:19.306Z,1520563399.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:19.698Z,1520563399.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:20.097Z,1520563400.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:20.510Z,1520563400.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:20.899Z,1520563400.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:21.293Z,1520563401.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:21.698Z,1520563401.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:22.154Z,1520563402.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:22.492Z,1520563402.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:22.933Z,1520563402.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:23.319Z,1520563403.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:23.700Z,1520563403.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:24.111Z,1520563404.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:24.522Z,1520563404.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:24.911Z,1520563404.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:25.302Z,1520563405.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:25.708Z,1520563405.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:26.115Z,1520563406.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:26.512Z,1520563406.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:29.630Z,1520563409.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:29.783Z,1520563409.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:30.187Z,1520563410.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:30.578Z,1520563410.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:30.983Z,1520563410.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:31.381Z,1520563411.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:31.782Z,1520563411.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:32.182Z,1520563412.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:32.581Z,1520563412.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:32.982Z,1520563412.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:33.379Z,1520563413.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:33.779Z,1520563413.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:34.182Z,1520563414.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:34.582Z,1520563414.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:34.982Z,1520563414.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:35.381Z,1520563415.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:35.787Z,1520563415.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:36.181Z,1520563416.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:36.583Z,1520563416.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:36.979Z,1520563416.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:37.382Z,1520563417.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:37.782Z,1520563417.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:38.180Z,1520563418.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:38.586Z,1520563418.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:38.982Z,1520563418.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:39.377Z,1520563419.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:39.782Z,1520563419.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:40.182Z,1520563420.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:40.583Z,1520563420.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:40.984Z,1520563420.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:41.409Z,1520563421.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:41.781Z,1520563421.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:42.185Z,1520563422.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:42.582Z,1520563422.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:43.026Z,1520563423.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:43.389Z,1520563423.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:43.780Z,1520563423.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:44.199Z,1520563424.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:44.594Z,1520563424.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:44.974Z,1520563424.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:45.390Z,1520563425.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:45.778Z,1520563425.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:46.176Z,1520563426.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:46.576Z,1520563426.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:46.974Z,1520563426.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:47.374Z,1520563427.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:47.778Z,1520563427.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:48.175Z,1520563428.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:48.578Z,1520563428.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:48.972Z,1520563428.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:49.374Z,1520563429.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:49.774Z,1520563429.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:50.174Z,1520563430.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:50.582Z,1520563430.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:50.974Z,1520563430.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:51.371Z,1520563431.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:51.782Z,1520563431.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:52.178Z,1520563432.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:52.579Z,1520563432.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:52.984Z,1520563432.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:53.381Z,1520563433.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:53.787Z,1520563433.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:54.185Z,1520563434.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:54.586Z,1520563434.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:54.972Z,1520563434.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:55.377Z,1520563435.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:55.786Z,1520563435.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:56.174Z,1520563436.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:56.575Z,1520563436.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:56.975Z,1520563436.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:57.372Z,1520563437.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:57.776Z,1520563437.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:58.174Z,1520563438.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:58.570Z,1520563438.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:58.974Z,1520563438.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:59.374Z,1520563439.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:43:59.771Z,1520563439.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:00.174Z,1520563440.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:00.570Z,1520563440.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:00.968Z,1520563440.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:01.374Z,1520563441.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:01.774Z,1520563441.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:02.171Z,1520563442.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:02.574Z,1520563442.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:02.974Z,1520563442.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:03.371Z,1520563443.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:03.778Z,1520563443.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:04.181Z,1520563444.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:04.581Z,1520563444.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:04.983Z,1520563444.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:05.386Z,1520563445.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:05.779Z,1520563445.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:06.192Z,1520563446.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:06.588Z,1520563446.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:06.979Z,1520563446.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:07.382Z,1520563447.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:07.778Z,1520563447.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:08.167Z,1520563448.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:08.586Z,1520563448.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:08.986Z,1520563448.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:09.371Z,1520563449.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:09.782Z,1520563449.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:10.170Z,1520563450.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:10.582Z,1520563450.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:10.987Z,1520563450.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:11.383Z,1520563451.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:11.770Z,1520563451.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:12.194Z,1520563452.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:12.582Z,1520563452.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:12.982Z,1520563452.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:13.382Z,1520563453.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:13.782Z,1520563453.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:14.182Z,1520563454.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:14.586Z,1520563454.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:14.986Z,1520563454.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:15.371Z,1520563455.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:15.782Z,1520563455.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:16.183Z,1520563456.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:16.582Z,1520563456.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:16.982Z,1520563456.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:17.385Z,1520563457.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:17.783Z,1520563457.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:18.195Z,1520563458.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:18.583Z,1520563458.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:18.971Z,1520563458.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:19.374Z,1520563459.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:19.774Z,1520563459.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:20.171Z,1520563460.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:20.574Z,1520563460.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:20.978Z,1520563460.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:21.371Z,1520563461.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:21.778Z,1520563461.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:22.179Z,1520563462.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:22.578Z,1520563462.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:22.975Z,1520563462.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:23.374Z,1520563463.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:23.773Z,1520563463.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:24.174Z,1520563464.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:24.577Z,1520563464.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:24.981Z,1520563464.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:25.386Z,1520563465.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:25.778Z,1520563465.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:26.182Z,1520563466.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:26.585Z,1520563466.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:29.744Z,1520563469.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:29.873Z,1520563469.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:30.231Z,1520563470.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:30.628Z,1520563470.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:31.035Z,1520563471.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:31.430Z,1520563471.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:31.830Z,1520563471.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:32.224Z,1520563472.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:32.630Z,1520563472.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:33.028Z,1520563473.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:33.430Z,1520563473.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:33.831Z,1520563473.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:34.230Z,1520563474.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:34.630Z,1520563474.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:35.029Z,1520563475.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:35.434Z,1520563475.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:35.830Z,1520563475.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:36.231Z,1520563476.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:36.625Z,1520563476.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:37.035Z,1520563477.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:37.422Z,1520563477.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:37.821Z,1520563477.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:38.223Z,1520563478.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:38.641Z,1520563478.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:39.019Z,1520563479.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:39.418Z,1520563479.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:39.822Z,1520563479.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:40.222Z,1520563480.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:40.627Z,1520563480.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:41.022Z,1520563481.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:41.416Z,1520563481.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:41.822Z,1520563481.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:42.227Z,1520563482.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:42.626Z,1520563482.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:43.031Z,1520563483.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:43.431Z,1520563483.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:43.831Z,1520563483.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:44.231Z,1520563484.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:44.639Z,1520563484.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:45.028Z,1520563485.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:45.432Z,1520563485.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:45.839Z,1520563485.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:46.231Z,1520563486.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:46.631Z,1520563486.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:47.042Z,1520563487.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:47.416Z,1520563487.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:47.818Z,1520563487.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:48.232Z,1520563488.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:48.635Z,1520563488.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:49.031Z,1520563489.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:49.430Z,1520563489.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:49.831Z,1520563489.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:50.219Z,1520563490.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:50.623Z,1520563490.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:51.030Z,1520563491.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:51.434Z,1520563491.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:51.842Z,1520563491.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:52.220Z,1520563492.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:52.622Z,1520563492.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:53.042Z,1520563493.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:53.418Z,1520563493.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:53.822Z,1520563493.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:54.243Z,1520563494.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:54.619Z,1520563494.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:55.021Z,1520563495.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:55.421Z,1520563495.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:55.819Z,1520563495.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:56.222Z,1520563496.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:56.622Z,1520563496.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:57.020Z,1520563497.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:57.434Z,1520563497.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:57.822Z,1520563497.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:58.219Z,1520563498.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:58.642Z,1520563498.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:59.023Z,1520563499.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:59.422Z,1520563499.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:44:59.822Z,1520563499.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:00.222Z,1520563500.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:00.622Z,1520563500.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:01.043Z,1520563501.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:01.422Z,1520563501.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:01.822Z,1520563501.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:02.233Z,1520563502.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:02.622Z,1520563502.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:03.015Z,1520563503.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:03.422Z,1520563503.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:03.823Z,1520563503.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:04.218Z,1520563504.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:04.626Z,1520563504.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:05.022Z,1520563505.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:05.418Z,1520563505.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:05.826Z,1520563505.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:06.227Z,1520563506.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:06.634Z,1520563506.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:07.029Z,1520563507.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:07.438Z,1520563507.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:07.826Z,1520563507.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:08.228Z,1520563508.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:08.630Z,1520563508.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:09.027Z,1520563509.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:09.428Z,1520563509.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:09.834Z,1520563509.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:10.230Z,1520563510.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:10.631Z,1520563510.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:11.025Z,1520563511.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:11.434Z,1520563511.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:11.833Z,1520563511.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:12.222Z,1520563512.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:12.618Z,1520563512.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:13.042Z,1520563513.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:13.422Z,1520563513.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:13.821Z,1520563513.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:14.222Z,1520563514.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:14.622Z,1520563514.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:15.022Z,1520563515.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:15.423Z,1520563515.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:15.823Z,1520563515.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:16.219Z,1520563516.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:16.623Z,1520563516.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:17.031Z,1520563517.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:17.431Z,1520563517.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:17.831Z,1520563517.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:18.229Z,1520563518.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:18.629Z,1520563518.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:19.030Z,1520563519.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:19.428Z,1520563519.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:19.829Z,1520563519.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:20.235Z,1520563520.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:20.642Z,1520563520.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:21.017Z,1520563521.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:21.419Z,1520563521.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:21.822Z,1520563521.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:22.219Z,1520563522.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:22.626Z,1520563522.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:23.022Z,1520563523.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:23.426Z,1520563523.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:23.819Z,1520563523.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:24.222Z,1520563524.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:24.621Z,1520563524.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:25.019Z,1520563525.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:25.038Z,1520563525.038 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T02:45:25.038Z,1520563525.038 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 40
2018-03-09T02:45:25.038Z,1520563525.038 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T02:45:25.059Z,1520563525.059 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T02:45:25.434Z,1520563525.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:25.497Z,1520563525.497 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T02:45:25.497Z,1520563525.497 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 40
2018-03-09T02:45:25.829Z,1520563525.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:25.846Z,1520563525.846 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T02:45:25.847Z,1520563525.847 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T02:45:25.847Z,1520563525.847 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T02:45:26.230Z,1520563526.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:26.251Z,1520563526.251 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-09T02:45:26.251Z,1520563526.251 [Default:CheckIn:C.Wait] Stopped
2018-03-09T02:45:26.251Z,1520563526.251 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-09T02:45:26.251Z,1520563526.251 [Default:CheckIn:D] Running Loop=1
2018-03-09T02:45:26.631Z,1520563526.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:26.651Z,1520563526.651 [Default:CheckIn:D] Stopped
2018-03-09T02:45:26.651Z,1520563526.651 [Default:CheckIn:E] Running Loop=1
2018-03-09T02:45:29.850Z,1520563529.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:29.892Z,1520563529.892 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1139.697396 min 
2018-03-09T02:45:29.893Z,1520563529.893 [Default:CheckIn:E] Stopped
2018-03-09T02:45:29.893Z,1520563529.893 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-09T02:45:29.893Z,1520563529.893 [Default:CheckIn] Stopped
2018-03-09T02:45:29.893Z,1520563529.893 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-09T02:45:29.893Z,1520563529.893 [Default:CheckIn](INFO): Running loop #115
2018-03-09T02:45:29.893Z,1520563529.893 [Default:CheckIn] Running Loop=115
2018-03-09T02:45:29.893Z,1520563529.893 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-09T02:45:29.893Z,1520563529.893 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-09T02:45:29.977Z,1520563529.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:30.330Z,1520563530.330 [NAL9602](INFO): Powering up
2018-03-09T02:45:30.347Z,1520563530.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:30.742Z,1520563530.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:31.149Z,1520563531.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:31.543Z,1520563531.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:31.941Z,1520563531.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:32.342Z,1520563532.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:32.755Z,1520563532.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:33.134Z,1520563533.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:33.547Z,1520563533.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:33.958Z,1520563533.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:34.358Z,1520563534.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:34.734Z,1520563534.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:35.138Z,1520563535.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:35.537Z,1520563535.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:35.936Z,1520563535.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:36.344Z,1520563536.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:36.734Z,1520563536.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:37.135Z,1520563537.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:37.538Z,1520563537.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:37.934Z,1520563537.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:38.334Z,1520563538.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:38.742Z,1520563538.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:39.142Z,1520563539.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:39.538Z,1520563539.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:39.942Z,1520563539.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:40.338Z,1520563540.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:40.738Z,1520563540.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:41.151Z,1520563541.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:41.526Z,1520563541.526 [NAL9602](INFO): NAL9602 initialized
2018-03-09T02:45:41.543Z,1520563541.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:41.947Z,1520563541.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:42.322Z,1520563542.322 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-09T02:45:42.322Z,1520563542.322 [NAL9602] Data Fault, FailCount= 5
2018-03-09T02:45:42.322Z,1520563542.322 [NAL9602](ERROR): Data Fault
2018-03-09T02:45:42.354Z,1520563542.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:42.451Z,1520563542.451 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-09T02:45:42.452Z,1520563542.452 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-09T02:45:42.722Z,1520563542.722 [NAL9602](INFO): Powering down
2018-03-09T02:45:42.751Z,1520563542.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:42.891Z,1520563542.891 [CBIT](INFO): Critical error at 20180309T024542
2018-03-09T02:45:43.140Z,1520563543.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:43.554Z,1520563543.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:43.968Z,1520563543.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:44.342Z,1520563544.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:44.743Z,1520563544.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:45.143Z,1520563545.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:45.545Z,1520563545.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:45.945Z,1520563545.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:46.345Z,1520563546.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:46.745Z,1520563546.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:47.154Z,1520563547.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:47.545Z,1520563547.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:47.935Z,1520563547.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:48.357Z,1520563548.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:48.746Z,1520563548.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:49.135Z,1520563549.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:49.545Z,1520563549.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:49.933Z,1520563549.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:50.345Z,1520563550.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:50.754Z,1520563550.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:51.134Z,1520563551.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:51.535Z,1520563551.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:51.941Z,1520563551.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:52.333Z,1520563552.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:52.734Z,1520563552.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:53.158Z,1520563553.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:53.543Z,1520563553.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:53.944Z,1520563553.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:54.354Z,1520563554.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:54.746Z,1520563554.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:55.143Z,1520563555.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:55.554Z,1520563555.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:55.945Z,1520563555.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:56.341Z,1520563556.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:56.742Z,1520563556.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:57.149Z,1520563557.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:57.543Z,1520563557.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:57.940Z,1520563557.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:58.349Z,1520563558.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:58.749Z,1520563558.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:59.144Z,1520563559.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:59.549Z,1520563559.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:45:59.946Z,1520563559.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:00.341Z,1520563560.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:00.737Z,1520563560.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:01.135Z,1520563561.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:01.538Z,1520563561.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:01.937Z,1520563561.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:02.338Z,1520563562.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:02.738Z,1520563562.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:03.137Z,1520563563.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:03.536Z,1520563563.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:03.938Z,1520563563.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:04.334Z,1520563564.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:04.734Z,1520563564.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:05.142Z,1520563565.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:05.538Z,1520563565.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:05.931Z,1520563565.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:06.338Z,1520563566.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:06.737Z,1520563566.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:07.136Z,1520563567.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:07.544Z,1520563567.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:07.947Z,1520563567.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:08.343Z,1520563568.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:08.754Z,1520563568.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:09.145Z,1520563569.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:09.544Z,1520563569.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:09.949Z,1520563569.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:10.346Z,1520563570.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:10.746Z,1520563570.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:11.146Z,1520563571.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:11.549Z,1520563571.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:11.945Z,1520563571.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:12.346Z,1520563572.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:12.739Z,1520563572.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:13.135Z,1520563573.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:13.537Z,1520563573.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:13.938Z,1520563573.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:14.338Z,1520563574.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:14.746Z,1520563574.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:15.141Z,1520563575.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:15.531Z,1520563575.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:15.938Z,1520563575.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:16.338Z,1520563576.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:16.743Z,1520563576.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:17.154Z,1520563577.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:17.542Z,1520563577.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:17.938Z,1520563577.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:18.342Z,1520563578.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:18.743Z,1520563578.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:19.141Z,1520563579.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:19.545Z,1520563579.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:19.946Z,1520563579.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:20.339Z,1520563580.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:20.745Z,1520563580.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:21.144Z,1520563581.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:21.545Z,1520563581.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:21.953Z,1520563581.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:22.349Z,1520563582.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:22.745Z,1520563582.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:23.145Z,1520563583.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:23.546Z,1520563583.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:23.942Z,1520563583.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:24.345Z,1520563584.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:24.744Z,1520563584.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:25.141Z,1520563585.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:25.540Z,1520563585.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:25.944Z,1520563585.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:26.338Z,1520563586.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:26.738Z,1520563586.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:30.085Z,1520563590.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:30.196Z,1520563590.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:30.603Z,1520563590.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:30.986Z,1520563590.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:31.388Z,1520563591.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:31.790Z,1520563591.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:32.191Z,1520563592.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:32.595Z,1520563592.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:32.993Z,1520563592.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:33.395Z,1520563593.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:33.794Z,1520563593.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:34.204Z,1520563594.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:34.597Z,1520563594.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:34.995Z,1520563594.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:35.405Z,1520563595.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:35.794Z,1520563595.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:36.194Z,1520563596.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:36.593Z,1520563596.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:36.997Z,1520563596.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:37.389Z,1520563597.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:37.793Z,1520563597.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:38.194Z,1520563598.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:38.597Z,1520563598.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:38.992Z,1520563598.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:39.391Z,1520563599.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:39.789Z,1520563599.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:40.195Z,1520563600.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:40.597Z,1520563600.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:40.994Z,1520563600.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:41.393Z,1520563601.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:41.794Z,1520563601.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:42.191Z,1520563602.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:42.603Z,1520563602.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:42.993Z,1520563602.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:43.383Z,1520563603.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:43.797Z,1520563603.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:44.186Z,1520563604.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:44.597Z,1520563604.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:45.002Z,1520563605.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:45.397Z,1520563605.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:45.797Z,1520563605.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:46.186Z,1520563606.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:46.597Z,1520563606.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:46.983Z,1520563606.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:47.389Z,1520563607.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:47.806Z,1520563607.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:48.183Z,1520563608.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:48.605Z,1520563608.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:49.007Z,1520563609.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:49.383Z,1520563609.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:49.785Z,1520563609.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:50.186Z,1520563610.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:50.590Z,1520563610.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:50.986Z,1520563610.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:51.390Z,1520563611.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:51.790Z,1520563611.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:52.186Z,1520563612.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:52.590Z,1520563612.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:52.983Z,1520563612.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:53.381Z,1520563613.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:53.786Z,1520563613.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:54.182Z,1520563614.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:54.585Z,1520563614.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:54.994Z,1520563614.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:55.390Z,1520563615.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:55.797Z,1520563615.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:56.194Z,1520563616.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:56.597Z,1520563616.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:57.003Z,1520563617.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:57.397Z,1520563617.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:57.793Z,1520563617.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:58.193Z,1520563618.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:58.593Z,1520563618.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:58.997Z,1520563618.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:59.394Z,1520563619.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:46:59.792Z,1520563619.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:00.190Z,1520563620.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:00.594Z,1520563620.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:00.998Z,1520563620.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:01.394Z,1520563621.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:01.794Z,1520563621.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:02.194Z,1520563622.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:02.593Z,1520563622.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:03.004Z,1520563623.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:03.391Z,1520563623.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:03.786Z,1520563623.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:04.187Z,1520563624.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:04.582Z,1520563624.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:04.986Z,1520563624.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:05.390Z,1520563625.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:05.790Z,1520563625.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:06.187Z,1520563626.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:06.586Z,1520563626.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:06.983Z,1520563626.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:07.382Z,1520563627.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:07.785Z,1520563627.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:08.187Z,1520563628.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:08.590Z,1520563628.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:09.006Z,1520563629.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:09.382Z,1520563629.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:09.786Z,1520563629.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:10.207Z,1520563630.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:10.586Z,1520563630.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:10.990Z,1520563630.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:11.386Z,1520563631.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:11.785Z,1520563631.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:12.190Z,1520563632.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:12.585Z,1520563632.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:12.984Z,1520563632.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:13.390Z,1520563633.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:13.786Z,1520563633.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:14.183Z,1520563634.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:14.586Z,1520563634.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:14.985Z,1520563634.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:15.386Z,1520563635.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:15.790Z,1520563635.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:16.202Z,1520563636.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:16.590Z,1520563636.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:16.989Z,1520563636.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:17.401Z,1520563637.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:17.791Z,1520563637.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:18.190Z,1520563638.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:18.593Z,1520563638.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:18.989Z,1520563638.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:19.394Z,1520563639.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:19.794Z,1520563639.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:20.189Z,1520563640.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:20.594Z,1520563640.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:20.993Z,1520563640.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:21.389Z,1520563641.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:21.803Z,1520563641.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:22.192Z,1520563642.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:22.585Z,1520563642.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:23.002Z,1520563643.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:23.386Z,1520563643.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:23.790Z,1520563643.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:24.186Z,1520563644.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:24.587Z,1520563644.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:24.983Z,1520563644.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:25.386Z,1520563645.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:25.786Z,1520563645.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:26.179Z,1520563646.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:26.586Z,1520563646.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:26.994Z,1520563646.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:30.270Z,1520563650.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:30.385Z,1520563650.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:30.742Z,1520563650.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:31.140Z,1520563651.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:31.546Z,1520563651.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:31.943Z,1520563651.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:32.342Z,1520563652.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:32.741Z,1520563652.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:33.140Z,1520563653.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:33.534Z,1520563653.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:33.943Z,1520563653.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:34.341Z,1520563654.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:34.737Z,1520563654.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:35.145Z,1520563655.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:35.550Z,1520563655.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:35.940Z,1520563655.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:36.351Z,1520563656.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:36.741Z,1520563656.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:37.130Z,1520563657.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:37.542Z,1520563657.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:37.954Z,1520563657.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:38.330Z,1520563658.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:38.746Z,1520563658.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:39.134Z,1520563659.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:39.527Z,1520563659.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:39.938Z,1520563659.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:40.334Z,1520563660.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:40.734Z,1520563660.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:41.136Z,1520563661.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:41.534Z,1520563661.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:41.935Z,1520563661.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:42.336Z,1520563662.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:42.414Z,1520563662.414 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-09T02:47:42.414Z,1520563662.414 [NAL9602] No Fault, FailCount= 5
2018-03-09T02:47:42.726Z,1520563662.726 [NAL9602](INFO): Powering up NAL9602
2018-03-09T02:47:42.749Z,1520563662.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:43.141Z,1520563663.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:43.550Z,1520563663.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:43.939Z,1520563663.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:44.345Z,1520563664.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:44.754Z,1520563664.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:45.144Z,1520563665.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:45.534Z,1520563665.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:45.938Z,1520563665.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:46.353Z,1520563666.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:46.739Z,1520563666.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:47.138Z,1520563667.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:47.535Z,1520563667.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:47.938Z,1520563667.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:48.338Z,1520563668.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:48.733Z,1520563668.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:49.138Z,1520563669.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:49.534Z,1520563669.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:49.940Z,1520563669.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:50.345Z,1520563670.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:50.736Z,1520563670.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:51.140Z,1520563671.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:51.538Z,1520563671.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:51.940Z,1520563671.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:52.338Z,1520563672.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:52.742Z,1520563672.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:53.140Z,1520563673.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:53.548Z,1520563673.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:53.914Z,1520563673.914 [NAL9602](INFO): NAL9602 initialized
2018-03-09T02:47:53.939Z,1520563673.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:54.349Z,1520563674.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:54.753Z,1520563674.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:55.156Z,1520563675.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:55.540Z,1520563675.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:55.934Z,1520563675.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:56.334Z,1520563676.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:56.740Z,1520563676.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:57.161Z,1520563677.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:57.561Z,1520563677.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:57.949Z,1520563677.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:58.339Z,1520563678.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:58.750Z,1520563678.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:59.142Z,1520563679.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:59.550Z,1520563679.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:47:59.947Z,1520563679.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:00.347Z,1520563680.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:00.741Z,1520563680.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:01.130Z,1520563681.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:01.530Z,1520563681.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:01.957Z,1520563681.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:02.353Z,1520563682.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:02.754Z,1520563682.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:03.161Z,1520563683.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:03.534Z,1520563683.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:03.936Z,1520563683.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:04.356Z,1520563684.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:04.734Z,1520563684.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:05.130Z,1520563685.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:05.534Z,1520563685.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:05.930Z,1520563685.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:06.338Z,1520563686.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:06.749Z,1520563686.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:07.162Z,1520563687.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:07.535Z,1520563687.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:07.952Z,1520563687.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:08.345Z,1520563688.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:08.735Z,1520563688.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:09.138Z,1520563689.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:09.542Z,1520563689.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:09.939Z,1520563689.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:10.347Z,1520563690.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:10.742Z,1520563690.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:11.143Z,1520563691.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:11.547Z,1520563691.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:11.942Z,1520563691.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:12.343Z,1520563692.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:12.751Z,1520563692.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:13.134Z,1520563693.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:13.529Z,1520563693.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:13.934Z,1520563693.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:14.334Z,1520563694.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:14.734Z,1520563694.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:15.134Z,1520563695.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:15.535Z,1520563695.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:15.932Z,1520563695.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:16.338Z,1520563696.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:16.765Z,1520563696.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:17.154Z,1520563697.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:17.557Z,1520563697.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:17.934Z,1520563697.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:18.338Z,1520563698.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:18.734Z,1520563698.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:19.134Z,1520563699.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:19.532Z,1520563699.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:19.934Z,1520563699.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:20.335Z,1520563700.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:20.754Z,1520563700.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:21.154Z,1520563701.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:21.534Z,1520563701.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:21.932Z,1520563701.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:22.338Z,1520563702.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:22.734Z,1520563702.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:23.133Z,1520563703.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:23.534Z,1520563703.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:23.934Z,1520563703.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:24.334Z,1520563704.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:24.734Z,1520563704.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:25.145Z,1520563705.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:25.545Z,1520563705.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:25.950Z,1520563705.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:25.982Z,1520563705.982 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T02:48:25.982Z,1520563705.982 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 41
2018-03-09T02:48:25.983Z,1520563705.983 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T02:48:25.995Z,1520563705.995 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T02:48:26.350Z,1520563706.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:26.397Z,1520563706.397 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T02:48:26.397Z,1520563706.397 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 41
2018-03-09T02:48:26.742Z,1520563706.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:26.776Z,1520563706.776 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T02:48:26.781Z,1520563706.781 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T02:48:26.781Z,1520563706.781 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T02:48:27.142Z,1520563707.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:30.311Z,1520563710.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:30.439Z,1520563710.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:30.798Z,1520563710.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:31.209Z,1520563711.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:31.591Z,1520563711.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:31.992Z,1520563711.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:32.398Z,1520563712.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:32.792Z,1520563712.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:33.189Z,1520563713.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:33.590Z,1520563713.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:34.008Z,1520563714.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:34.413Z,1520563714.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:34.783Z,1520563714.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:35.185Z,1520563715.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:35.587Z,1520563715.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:35.988Z,1520563715.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:36.387Z,1520563716.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:36.791Z,1520563716.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:37.199Z,1520563717.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:37.593Z,1520563717.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:38.018Z,1520563718.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:38.397Z,1520563718.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:38.790Z,1520563718.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:39.186Z,1520563719.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:39.598Z,1520563719.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:39.987Z,1520563719.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:40.398Z,1520563720.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:40.796Z,1520563720.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:41.185Z,1520563721.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:41.598Z,1520563721.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:41.982Z,1520563721.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:42.400Z,1520563722.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:42.806Z,1520563722.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:43.210Z,1520563723.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:43.601Z,1520563723.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:43.986Z,1520563723.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:44.387Z,1520563724.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:44.795Z,1520563724.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:45.207Z,1520563725.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:45.588Z,1520563725.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:45.985Z,1520563725.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:46.387Z,1520563726.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:46.783Z,1520563726.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:47.198Z,1520563727.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:47.606Z,1520563727.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:48.005Z,1520563728.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:48.406Z,1520563728.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:48.791Z,1520563728.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:49.193Z,1520563729.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:49.591Z,1520563729.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:49.994Z,1520563729.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:50.399Z,1520563730.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:50.791Z,1520563730.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:51.198Z,1520563731.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:51.586Z,1520563731.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:52.010Z,1520563732.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:52.412Z,1520563732.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:52.824Z,1520563732.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:53.201Z,1520563733.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:53.596Z,1520563733.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:53.991Z,1520563733.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:54.399Z,1520563734.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:54.789Z,1520563734.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:55.199Z,1520563735.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:55.582Z,1520563735.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:55.988Z,1520563735.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:56.388Z,1520563736.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:56.790Z,1520563736.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:57.210Z,1520563737.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:57.613Z,1520563737.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:58.006Z,1520563738.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:58.417Z,1520563738.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:58.787Z,1520563738.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:59.183Z,1520563739.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:48:59.602Z,1520563739.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:00.003Z,1520563740.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:00.395Z,1520563740.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:00.792Z,1520563740.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:01.201Z,1520563741.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:01.580Z,1520563741.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:01.990Z,1520563741.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:02.409Z,1520563742.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:02.809Z,1520563742.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:03.210Z,1520563743.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:03.601Z,1520563743.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:03.982Z,1520563743.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:04.386Z,1520563744.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:04.787Z,1520563744.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:05.194Z,1520563745.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:05.607Z,1520563745.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:05.987Z,1520563745.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:06.386Z,1520563746.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:06.787Z,1520563746.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:07.187Z,1520563747.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:07.597Z,1520563747.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:08.013Z,1520563748.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:08.405Z,1520563748.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:08.802Z,1520563748.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:09.207Z,1520563749.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:09.596Z,1520563749.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:09.986Z,1520563749.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:10.386Z,1520563750.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:10.788Z,1520563750.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:11.191Z,1520563751.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:11.588Z,1520563751.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:11.999Z,1520563751.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:12.390Z,1520563752.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:12.805Z,1520563752.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:13.209Z,1520563753.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:13.605Z,1520563753.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:14.006Z,1520563754.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:14.382Z,1520563754.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:14.782Z,1520563754.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:15.190Z,1520563755.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:15.590Z,1520563755.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:15.990Z,1520563755.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:16.389Z,1520563756.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:16.794Z,1520563756.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:17.194Z,1520563757.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:17.592Z,1520563757.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:18.013Z,1520563758.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:18.407Z,1520563758.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:18.817Z,1520563758.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:19.206Z,1520563759.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:19.586Z,1520563759.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:19.990Z,1520563759.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:20.394Z,1520563760.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:20.792Z,1520563760.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:21.198Z,1520563761.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:21.582Z,1520563761.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:21.982Z,1520563761.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:22.386Z,1520563762.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:22.782Z,1520563762.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:23.194Z,1520563763.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:23.609Z,1520563763.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:24.001Z,1520563764.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:24.397Z,1520563764.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:24.790Z,1520563764.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:25.190Z,1520563765.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:25.592Z,1520563765.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:26.002Z,1520563766.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:26.383Z,1520563766.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:26.791Z,1520563766.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:27.186Z,1520563767.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:30.381Z,1520563770.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:30.514Z,1520563770.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:30.905Z,1520563770.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:31.297Z,1520563771.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:31.721Z,1520563771.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:32.090Z,1520563772.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:32.511Z,1520563772.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:32.895Z,1520563772.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:33.304Z,1520563773.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:33.705Z,1520563773.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:34.111Z,1520563774.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:34.506Z,1520563774.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:34.888Z,1520563774.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:35.310Z,1520563775.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:35.710Z,1520563775.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:36.089Z,1520563776.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:36.501Z,1520563776.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:36.889Z,1520563776.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:37.286Z,1520563777.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:37.695Z,1520563777.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:38.102Z,1520563778.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:38.495Z,1520563778.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:38.890Z,1520563778.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:39.289Z,1520563779.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:39.735Z,1520563779.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:40.084Z,1520563780.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:40.537Z,1520563780.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:40.921Z,1520563780.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:41.293Z,1520563781.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:41.712Z,1520563781.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:42.118Z,1520563782.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:42.502Z,1520563782.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:42.907Z,1520563782.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:43.300Z,1520563783.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:43.697Z,1520563783.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:44.121Z,1520563784.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:44.488Z,1520563784.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:44.895Z,1520563784.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:45.301Z,1520563785.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:45.699Z,1520563785.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:46.095Z,1520563786.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:46.505Z,1520563786.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:46.903Z,1520563786.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:47.288Z,1520563787.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:47.710Z,1520563787.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:48.092Z,1520563788.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:48.531Z,1520563788.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:48.898Z,1520563788.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:49.298Z,1520563789.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:49.701Z,1520563789.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:50.105Z,1520563790.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:50.479Z,1520563790.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:50.908Z,1520563790.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:51.302Z,1520563791.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:51.709Z,1520563791.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:52.109Z,1520563792.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:52.483Z,1520563792.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:52.898Z,1520563792.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:53.300Z,1520563793.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:53.682Z,1520563793.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:54.090Z,1520563794.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:54.490Z,1520563794.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:54.890Z,1520563794.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:55.281Z,1520563795.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:55.684Z,1520563795.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:56.111Z,1520563796.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:56.493Z,1520563796.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:56.909Z,1520563796.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:57.336Z,1520563797.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:57.711Z,1520563797.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:58.109Z,1520563798.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:58.519Z,1520563798.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:58.919Z,1520563798.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:59.297Z,1520563799.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:49:59.712Z,1520563799.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:00.092Z,1520563800.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:00.496Z,1520563800.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:00.894Z,1520563800.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:01.304Z,1520563801.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:01.701Z,1520563801.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:02.109Z,1520563802.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:02.501Z,1520563802.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:02.892Z,1520563802.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:03.311Z,1520563803.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:03.689Z,1520563803.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:04.091Z,1520563804.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:04.502Z,1520563804.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:04.917Z,1520563804.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:05.299Z,1520563805.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:05.708Z,1520563805.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:06.083Z,1520563806.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:06.510Z,1520563806.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:06.901Z,1520563806.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:07.307Z,1520563807.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:07.707Z,1520563807.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:08.079Z,1520563808.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:08.488Z,1520563808.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:08.889Z,1520563808.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:09.282Z,1520563809.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:09.691Z,1520563809.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:10.086Z,1520563810.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:10.487Z,1520563810.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:10.889Z,1520563810.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:11.282Z,1520563811.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:11.701Z,1520563811.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:12.126Z,1520563812.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:12.504Z,1520563812.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:12.929Z,1520563812.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:13.319Z,1520563813.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:13.706Z,1520563813.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:14.125Z,1520563814.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:14.496Z,1520563814.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:14.892Z,1520563814.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:15.301Z,1520563815.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:15.711Z,1520563815.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:16.091Z,1520563816.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:16.500Z,1520563816.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:16.902Z,1520563816.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:17.297Z,1520563817.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:17.703Z,1520563817.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:18.099Z,1520563818.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:18.479Z,1520563818.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:18.884Z,1520563818.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:19.314Z,1520563819.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:19.679Z,1520563819.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:20.097Z,1520563820.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:20.517Z,1520563820.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:20.897Z,1520563820.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:21.291Z,1520563821.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:21.705Z,1520563821.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:22.100Z,1520563822.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:22.498Z,1520563822.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:22.939Z,1520563822.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:23.306Z,1520563823.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:23.713Z,1520563823.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:24.097Z,1520563824.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:24.489Z,1520563824.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:24.899Z,1520563824.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:25.295Z,1520563825.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:25.705Z,1520563825.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:26.083Z,1520563826.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:26.483Z,1520563826.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:26.880Z,1520563826.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:27.313Z,1520563827.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:30.614Z,1520563830.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:30.634Z,1520563830.634 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-09T02:45:29.9Z
2018-03-09T02:50:30.635Z,1520563830.635 [Default:CheckIn:Read_GPS] Stopped
2018-03-09T02:50:30.635Z,1520563830.635 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-09T02:50:30.745Z,1520563830.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:31.195Z,1520563831.195 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180308T074127/Courier0460.lzma
2018-03-09T02:50:31.231Z,1520563831.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:31.524Z,1520563831.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:31.892Z,1520563831.892 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0460.lzma.bak
2018-03-09T02:50:31.892Z,1520563831.892 [DataOverHttps](INFO): SBD MOMSN=7991592
2018-03-09T02:50:31.933Z,1520563831.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:32.529Z,1520563832.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:32.720Z,1520563832.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:33.123Z,1520563833.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:36.428Z,1520563836.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:36.565Z,1520563836.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:36.925Z,1520563836.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:37.340Z,1520563837.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:37.736Z,1520563837.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:38.143Z,1520563838.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:38.518Z,1520563838.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:41.702Z,1520563841.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:41.837Z,1520563841.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:42.189Z,1520563842.189 [DataOverHttps](INFO): Sending 216 bytes from file Logs/20180308T074127/Express0461.lzma
2018-03-09T02:50:42.228Z,1520563842.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:42.609Z,1520563842.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:42.976Z,1520563842.976 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0461.lzma.bak
2018-03-09T02:50:43.028Z,1520563843.028 [DataOverHttps](INFO): SBD MOMSN=7991595
2018-03-09T02:50:43.121Z,1520563843.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:43.589Z,1520563843.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:43.620Z,1520563843.620 [Default:CheckIn:Read_Iridium] Stopped
2018-03-09T02:50:43.620Z,1520563843.620 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-09T02:50:43.620Z,1520563843.620 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-09T02:50:43.795Z,1520563843.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:46.981Z,1520563846.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:47.115Z,1520563847.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:47.493Z,1520563847.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:47.885Z,1520563847.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:48.280Z,1520563848.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:48.681Z,1520563848.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:49.080Z,1520563849.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:49.479Z,1520563849.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:49.880Z,1520563849.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:50.279Z,1520563850.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:50.679Z,1520563850.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:51.074Z,1520563851.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:51.478Z,1520563851.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:51.890Z,1520563851.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:52.291Z,1520563852.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:52.693Z,1520563852.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:53.085Z,1520563853.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:53.470Z,1520563853.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:53.870Z,1520563853.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:54.270Z,1520563854.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:54.670Z,1520563854.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:55.070Z,1520563855.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:55.470Z,1520563855.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:55.870Z,1520563855.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:56.270Z,1520563856.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:56.682Z,1520563856.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:57.090Z,1520563857.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:57.489Z,1520563857.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:57.887Z,1520563857.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:58.289Z,1520563858.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:58.670Z,1520563858.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:59.070Z,1520563859.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:59.470Z,1520563859.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:50:59.871Z,1520563859.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:00.270Z,1520563860.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:00.670Z,1520563860.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:01.070Z,1520563861.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:01.474Z,1520563861.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:01.870Z,1520563861.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:02.291Z,1520563862.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:02.681Z,1520563862.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:03.081Z,1520563863.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:03.481Z,1520563863.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:03.870Z,1520563863.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:04.282Z,1520563864.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:04.671Z,1520563864.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:05.078Z,1520563865.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:05.474Z,1520563865.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:05.876Z,1520563865.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:06.276Z,1520563866.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:06.678Z,1520563866.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:07.071Z,1520563867.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:07.489Z,1520563867.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:07.908Z,1520563867.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:08.293Z,1520563868.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:08.694Z,1520563868.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:09.070Z,1520563869.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:09.478Z,1520563869.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:09.878Z,1520563869.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:10.278Z,1520563870.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:10.678Z,1520563870.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:11.076Z,1520563871.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:11.483Z,1520563871.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:11.879Z,1520563871.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:12.282Z,1520563872.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:12.688Z,1520563872.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:13.090Z,1520563873.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:13.490Z,1520563873.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:13.889Z,1520563873.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:14.283Z,1520563874.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:14.670Z,1520563874.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:15.074Z,1520563875.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:15.470Z,1520563875.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:15.870Z,1520563875.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:16.290Z,1520563876.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:16.670Z,1520563876.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:17.070Z,1520563877.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:17.470Z,1520563877.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:17.894Z,1520563877.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:18.294Z,1520563878.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:18.688Z,1520563878.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:19.094Z,1520563879.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:19.474Z,1520563879.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:19.870Z,1520563879.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:20.270Z,1520563880.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:20.670Z,1520563880.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:21.078Z,1520563881.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:21.474Z,1520563881.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:21.878Z,1520563881.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:22.280Z,1520563882.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:22.680Z,1520563882.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:23.085Z,1520563883.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:23.484Z,1520563883.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:23.890Z,1520563883.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:24.296Z,1520563884.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:24.671Z,1520563884.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:25.072Z,1520563885.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:25.468Z,1520563885.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:25.875Z,1520563885.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:26.270Z,1520563886.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:26.670Z,1520563886.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:27.070Z,1520563887.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:27.114Z,1520563887.114 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T02:51:27.115Z,1520563887.115 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 42
2018-03-09T02:51:27.115Z,1520563887.115 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T02:51:27.136Z,1520563887.136 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T02:51:27.470Z,1520563887.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:27.519Z,1520563887.519 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T02:51:27.520Z,1520563887.520 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 42
2018-03-09T02:51:27.874Z,1520563887.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:27.904Z,1520563887.904 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T02:51:27.905Z,1520563887.905 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T02:51:27.905Z,1520563887.905 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T02:51:28.281Z,1520563888.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:28.681Z,1520563888.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:29.081Z,1520563889.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:29.481Z,1520563889.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:29.871Z,1520563889.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:30.270Z,1520563890.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:30.670Z,1520563890.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:31.071Z,1520563891.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:31.470Z,1520563891.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:31.870Z,1520563891.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:32.270Z,1520563892.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:32.674Z,1520563892.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:33.070Z,1520563893.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:33.494Z,1520563893.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:33.894Z,1520563893.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:34.281Z,1520563894.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:34.682Z,1520563894.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:35.068Z,1520563895.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:35.470Z,1520563895.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:35.877Z,1520563895.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:36.268Z,1520563896.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:36.675Z,1520563896.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:37.079Z,1520563897.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:37.476Z,1520563897.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:37.878Z,1520563897.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:38.279Z,1520563898.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:38.684Z,1520563898.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:39.084Z,1520563899.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:39.488Z,1520563899.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:39.888Z,1520563899.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:40.273Z,1520563900.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:40.682Z,1520563900.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:41.068Z,1520563901.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:41.475Z,1520563901.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:41.870Z,1520563901.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:42.268Z,1520563902.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:42.670Z,1520563902.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:43.070Z,1520563903.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:43.470Z,1520563903.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:43.902Z,1520563903.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:44.302Z,1520563904.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:47.480Z,1520563907.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:47.613Z,1520563907.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:47.970Z,1520563907.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:48.366Z,1520563908.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:48.770Z,1520563908.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:49.177Z,1520563909.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:49.575Z,1520563909.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:49.981Z,1520563909.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:50.385Z,1520563910.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:50.762Z,1520563910.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:51.178Z,1520563911.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:51.577Z,1520563911.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:51.959Z,1520563911.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:52.359Z,1520563912.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:52.780Z,1520563912.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:53.157Z,1520563913.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:53.559Z,1520563913.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:53.958Z,1520563913.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:54.378Z,1520563914.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:54.782Z,1520563914.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:55.181Z,1520563915.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:55.569Z,1520563915.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:55.964Z,1520563915.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:56.375Z,1520563916.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:56.764Z,1520563916.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:57.167Z,1520563917.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:57.576Z,1520563917.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:57.963Z,1520563917.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:58.375Z,1520563918.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:58.779Z,1520563918.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:59.155Z,1520563919.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:59.584Z,1520563919.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:51:59.978Z,1520563919.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:00.365Z,1520563920.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:00.782Z,1520563920.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:01.171Z,1520563921.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:01.558Z,1520563921.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:01.964Z,1520563921.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:02.366Z,1520563922.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:02.764Z,1520563922.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:03.172Z,1520563923.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:03.571Z,1520563923.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:03.967Z,1520563923.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:04.376Z,1520563924.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:04.782Z,1520563924.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:05.177Z,1520563925.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:05.577Z,1520563925.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:05.982Z,1520563925.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:06.358Z,1520563926.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:06.758Z,1520563926.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:07.175Z,1520563927.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:07.555Z,1520563927.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:07.955Z,1520563927.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:08.363Z,1520563928.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:08.754Z,1520563928.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:09.163Z,1520563929.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:09.230Z,1520563929.230 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-09T02:52:09.560Z,1520563929.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:09.970Z,1520563929.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:10.377Z,1520563930.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:10.797Z,1520563930.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:11.177Z,1520563931.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:11.561Z,1520563931.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:11.974Z,1520563931.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:12.366Z,1520563932.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:12.767Z,1520563932.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:13.176Z,1520563933.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:13.571Z,1520563933.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:13.961Z,1520563933.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:14.363Z,1520563934.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:14.762Z,1520563934.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:15.181Z,1520563935.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:15.586Z,1520563935.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:15.964Z,1520563935.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:16.381Z,1520563936.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:16.758Z,1520563936.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:17.154Z,1520563937.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:17.559Z,1520563937.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:17.964Z,1520563937.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:18.370Z,1520563938.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:18.767Z,1520563938.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:19.175Z,1520563939.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:19.570Z,1520563939.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:19.961Z,1520563939.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:20.381Z,1520563940.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:20.780Z,1520563940.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:21.181Z,1520563941.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:21.574Z,1520563941.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:21.954Z,1520563941.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:22.363Z,1520563942.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:22.758Z,1520563942.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:23.155Z,1520563943.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:23.558Z,1520563943.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:23.970Z,1520563943.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:24.363Z,1520563944.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:24.764Z,1520563944.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:25.171Z,1520563945.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:25.572Z,1520563945.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:25.973Z,1520563945.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:26.381Z,1520563946.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:26.778Z,1520563946.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:27.155Z,1520563947.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:27.559Z,1520563947.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:27.959Z,1520563947.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:28.363Z,1520563948.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:28.771Z,1520563948.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:29.163Z,1520563949.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:29.566Z,1520563949.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:29.964Z,1520563949.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:30.367Z,1520563950.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:30.768Z,1520563950.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:31.190Z,1520563951.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:31.576Z,1520563951.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:31.978Z,1520563951.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:32.379Z,1520563952.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:32.754Z,1520563952.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:33.155Z,1520563953.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:33.579Z,1520563953.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:33.954Z,1520563953.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:34.362Z,1520563954.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:34.781Z,1520563954.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:35.154Z,1520563955.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:35.554Z,1520563955.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:35.972Z,1520563955.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:36.369Z,1520563956.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:36.777Z,1520563956.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:37.185Z,1520563957.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:37.562Z,1520563957.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:37.967Z,1520563957.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:38.374Z,1520563958.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:38.757Z,1520563958.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:39.166Z,1520563959.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:39.568Z,1520563959.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:39.962Z,1520563959.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:40.365Z,1520563960.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:40.767Z,1520563960.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:41.173Z,1520563961.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:41.574Z,1520563961.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:41.980Z,1520563961.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:42.371Z,1520563962.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:42.762Z,1520563962.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:43.159Z,1520563963.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:43.558Z,1520563963.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:43.958Z,1520563963.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:44.366Z,1520563964.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:47.621Z,1520563967.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:47.757Z,1520563967.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:48.122Z,1520563968.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:48.525Z,1520563968.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:48.918Z,1520563968.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:49.314Z,1520563969.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:49.708Z,1520563969.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:50.104Z,1520563970.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:50.526Z,1520563970.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:50.916Z,1520563970.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:51.331Z,1520563971.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:51.727Z,1520563971.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:52.119Z,1520563972.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:52.529Z,1520563972.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:52.941Z,1520563972.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:53.336Z,1520563973.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:53.733Z,1520563973.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:54.129Z,1520563974.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:54.508Z,1520563974.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:54.911Z,1520563974.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:55.306Z,1520563975.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:55.724Z,1520563975.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:56.105Z,1520563976.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:56.507Z,1520563976.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:56.908Z,1520563976.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:57.288Z,1520563977.288 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-09T02:52:57.306Z,1520563977.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:57.728Z,1520563977.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:58.106Z,1520563978.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:58.546Z,1520563978.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:58.923Z,1520563978.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:59.312Z,1520563979.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:52:59.719Z,1520563979.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:00.131Z,1520563980.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:00.515Z,1520563980.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:00.933Z,1520563980.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:01.322Z,1520563981.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:01.729Z,1520563981.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:02.104Z,1520563982.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:02.520Z,1520563982.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:02.901Z,1520563982.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:03.303Z,1520563983.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:03.707Z,1520563983.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:04.102Z,1520563984.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:04.498Z,1520563984.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:04.898Z,1520563984.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:05.339Z,1520563985.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:05.702Z,1520563985.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:06.140Z,1520563986.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:06.518Z,1520563986.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:06.906Z,1520563986.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:07.319Z,1520563987.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:07.724Z,1520563987.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:08.124Z,1520563988.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:08.506Z,1520563988.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:08.918Z,1520563988.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:09.318Z,1520563989.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:09.714Z,1520563989.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:10.108Z,1520563990.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:10.500Z,1520563990.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:10.912Z,1520563990.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:11.311Z,1520563991.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:11.710Z,1520563991.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:12.110Z,1520563992.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:12.507Z,1520563992.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:12.914Z,1520563992.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:13.331Z,1520563993.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:13.711Z,1520563993.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:14.115Z,1520563994.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:14.531Z,1520563994.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:14.932Z,1520563994.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:15.323Z,1520563995.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:15.728Z,1520563995.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:16.102Z,1520563996.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:16.533Z,1520563996.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:16.928Z,1520563996.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:17.330Z,1520563997.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:17.711Z,1520563997.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:18.127Z,1520563998.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:18.499Z,1520563998.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:18.914Z,1520563998.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:19.314Z,1520563999.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:19.704Z,1520563999.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:20.097Z,1520564000.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:20.505Z,1520564000.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:20.923Z,1520564000.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:21.300Z,1520564001.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:21.740Z,1520564001.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:22.123Z,1520564002.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:22.509Z,1520564002.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:22.926Z,1520564002.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:23.324Z,1520564003.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:23.731Z,1520564003.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:24.118Z,1520564004.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:24.518Z,1520564004.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:24.915Z,1520564004.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:25.316Z,1520564005.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:25.714Z,1520564005.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:26.112Z,1520564006.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:26.524Z,1520564006.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:26.915Z,1520564006.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:27.310Z,1520564007.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:27.718Z,1520564007.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:28.107Z,1520564008.107 [NAL9602](INFO): Powering down
2018-03-09T02:53:28.133Z,1520564008.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:28.491Z,1520564008.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:28.933Z,1520564008.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:29.330Z,1520564009.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:29.704Z,1520564009.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:30.131Z,1520564010.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:30.533Z,1520564010.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:30.935Z,1520564010.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:31.321Z,1520564011.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:31.724Z,1520564011.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:32.114Z,1520564012.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:32.521Z,1520564012.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:32.903Z,1520564012.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:33.310Z,1520564013.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:33.714Z,1520564013.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:34.103Z,1520564014.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:34.510Z,1520564014.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:34.905Z,1520564014.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:35.346Z,1520564015.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:35.704Z,1520564015.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:36.141Z,1520564016.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:36.512Z,1520564016.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:36.919Z,1520564016.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:37.318Z,1520564017.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:37.738Z,1520564017.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:38.139Z,1520564018.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:38.518Z,1520564018.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:38.924Z,1520564018.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:39.314Z,1520564019.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:39.714Z,1520564019.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:40.102Z,1520564020.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:40.506Z,1520564020.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:40.914Z,1520564020.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:41.307Z,1520564021.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:41.710Z,1520564021.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:42.137Z,1520564022.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:42.531Z,1520564022.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:42.982Z,1520564022.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:43.309Z,1520564023.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:43.699Z,1520564023.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:44.109Z,1520564024.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:44.527Z,1520564024.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:48.323Z,1520564028.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:48.440Z,1520564028.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:48.832Z,1520564028.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:49.221Z,1520564029.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:49.622Z,1520564029.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:50.030Z,1520564030.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:50.430Z,1520564030.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:50.818Z,1520564030.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:51.222Z,1520564031.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:51.618Z,1520564031.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:52.018Z,1520564032.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:52.427Z,1520564032.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:52.826Z,1520564032.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:53.212Z,1520564033.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:53.630Z,1520564033.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:54.018Z,1520564034.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:54.422Z,1520564034.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:54.836Z,1520564034.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:55.230Z,1520564035.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:55.615Z,1520564035.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:56.022Z,1520564036.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:56.422Z,1520564036.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:56.822Z,1520564036.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:57.233Z,1520564037.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:57.630Z,1520564037.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:58.018Z,1520564038.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:58.427Z,1520564038.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:58.823Z,1520564038.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:59.226Z,1520564039.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:53:59.639Z,1520564039.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:00.026Z,1520564040.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:00.414Z,1520564040.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:00.829Z,1520564040.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:01.219Z,1520564041.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:01.623Z,1520564041.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:02.026Z,1520564042.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:02.427Z,1520564042.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:02.828Z,1520564042.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:03.226Z,1520564043.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:03.632Z,1520564043.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:04.025Z,1520564044.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:04.425Z,1520564044.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:04.831Z,1520564044.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:05.220Z,1520564045.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:05.631Z,1520564045.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:06.014Z,1520564046.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:06.423Z,1520564046.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:06.834Z,1520564046.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:07.226Z,1520564047.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:07.619Z,1520564047.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:08.030Z,1520564048.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:08.432Z,1520564048.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:08.826Z,1520564048.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:09.231Z,1520564049.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:09.623Z,1520564049.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:10.023Z,1520564050.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:10.426Z,1520564050.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:10.826Z,1520564050.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:11.225Z,1520564051.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:11.618Z,1520564051.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:12.019Z,1520564052.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:12.422Z,1520564052.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:12.819Z,1520564052.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:13.222Z,1520564053.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:13.612Z,1520564053.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:14.019Z,1520564054.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:14.422Z,1520564054.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:14.818Z,1520564054.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:15.222Z,1520564055.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:15.658Z,1520564055.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:16.018Z,1520564056.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:16.414Z,1520564056.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:16.826Z,1520564056.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:17.222Z,1520564057.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:17.626Z,1520564057.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:18.033Z,1520564058.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:18.436Z,1520564058.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:18.835Z,1520564058.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:19.230Z,1520564059.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:19.615Z,1520564059.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:20.026Z,1520564060.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:20.425Z,1520564060.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:20.826Z,1520564060.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:21.227Z,1520564061.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:21.630Z,1520564061.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:22.023Z,1520564062.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:22.426Z,1520564062.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:22.827Z,1520564062.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:23.212Z,1520564063.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:23.624Z,1520564063.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:24.026Z,1520564064.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:24.427Z,1520564064.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:24.826Z,1520564064.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:25.226Z,1520564065.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:25.620Z,1520564065.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:26.028Z,1520564066.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:26.427Z,1520564066.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:26.823Z,1520564066.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:27.227Z,1520564067.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:27.634Z,1520564067.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:28.018Z,1520564068.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:28.051Z,1520564068.051 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T02:54:28.051Z,1520564068.051 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 43
2018-03-09T02:54:28.051Z,1520564068.051 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T02:54:28.089Z,1520564068.089 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T02:54:28.430Z,1520564068.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:28.513Z,1520564068.513 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T02:54:28.513Z,1520564068.513 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 43
2018-03-09T02:54:28.817Z,1520564068.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:28.866Z,1520564068.866 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T02:54:28.866Z,1520564068.866 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T02:54:28.866Z,1520564068.866 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T02:54:29.215Z,1520564069.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:29.626Z,1520564069.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:30.027Z,1520564070.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:30.423Z,1520564070.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:30.827Z,1520564070.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:31.230Z,1520564071.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:31.612Z,1520564071.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:32.022Z,1520564072.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:32.421Z,1520564072.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:32.814Z,1520564072.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:33.222Z,1520564073.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:33.622Z,1520564073.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:34.014Z,1520564074.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:34.423Z,1520564074.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:34.825Z,1520564074.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:35.227Z,1520564075.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:35.626Z,1520564075.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:36.025Z,1520564076.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:36.430Z,1520564076.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:36.821Z,1520564076.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:37.227Z,1520564077.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:37.623Z,1520564077.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:38.022Z,1520564078.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:38.426Z,1520564078.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:38.823Z,1520564078.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:39.226Z,1520564079.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:39.624Z,1520564079.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:40.023Z,1520564080.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:40.427Z,1520564080.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:40.830Z,1520564080.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:41.222Z,1520564081.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:41.628Z,1520564081.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:42.022Z,1520564082.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:42.426Z,1520564082.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:42.828Z,1520564082.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:43.220Z,1520564083.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:43.622Z,1520564083.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:44.027Z,1520564084.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:44.425Z,1520564084.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:44.827Z,1520564084.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:47.975Z,1520564087.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:48.094Z,1520564088.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:48.452Z,1520564088.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:48.851Z,1520564088.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:49.234Z,1520564089.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:49.661Z,1520564089.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:50.037Z,1520564090.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:50.450Z,1520564090.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:50.838Z,1520564090.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:51.239Z,1520564091.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:51.637Z,1520564091.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:52.061Z,1520564092.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:52.433Z,1520564092.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:52.866Z,1520564092.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:53.249Z,1520564093.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:53.634Z,1520564093.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:54.034Z,1520564094.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:54.455Z,1520564094.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:54.837Z,1520564094.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:55.234Z,1520564095.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:55.638Z,1520564095.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:56.040Z,1520564096.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:56.449Z,1520564096.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:56.843Z,1520564096.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:57.246Z,1520564097.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:57.640Z,1520564097.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:58.052Z,1520564098.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:58.443Z,1520564098.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:58.848Z,1520564098.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:59.249Z,1520564099.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:54:59.650Z,1520564099.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:00.043Z,1520564100.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:00.450Z,1520564100.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:00.855Z,1520564100.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:01.239Z,1520564101.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:01.642Z,1520564101.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:02.042Z,1520564102.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:02.436Z,1520564102.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:02.840Z,1520564102.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:03.238Z,1520564103.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:03.635Z,1520564103.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:04.057Z,1520564104.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:04.448Z,1520564104.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:04.844Z,1520564104.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:05.244Z,1520564105.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:05.654Z,1520564105.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:06.047Z,1520564106.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:06.441Z,1520564106.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:06.846Z,1520564106.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:07.237Z,1520564107.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:07.642Z,1520564107.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:08.039Z,1520564108.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:08.435Z,1520564108.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:08.839Z,1520564108.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:09.240Z,1520564109.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:09.635Z,1520564109.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:10.038Z,1520564110.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:10.445Z,1520564110.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:10.845Z,1520564110.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:11.238Z,1520564111.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:11.638Z,1520564111.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:12.035Z,1520564112.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:12.446Z,1520564112.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:12.847Z,1520564112.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:13.239Z,1520564113.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:13.649Z,1520564113.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:14.041Z,1520564114.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:14.442Z,1520564114.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:14.838Z,1520564114.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:15.239Z,1520564115.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:15.638Z,1520564115.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:16.038Z,1520564116.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:16.437Z,1520564116.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:16.845Z,1520564116.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:17.241Z,1520564117.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:17.647Z,1520564117.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:18.032Z,1520564118.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:18.449Z,1520564118.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:18.849Z,1520564118.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:19.242Z,1520564119.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:19.654Z,1520564119.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:20.046Z,1520564120.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:20.449Z,1520564120.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:20.844Z,1520564120.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:21.248Z,1520564121.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:21.649Z,1520564121.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:22.042Z,1520564122.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:22.438Z,1520564122.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:22.843Z,1520564122.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:23.244Z,1520564123.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:23.645Z,1520564123.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:24.035Z,1520564124.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:24.438Z,1520564124.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:24.834Z,1520564124.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:25.239Z,1520564125.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:25.634Z,1520564125.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:26.038Z,1520564126.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:26.440Z,1520564126.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:26.852Z,1520564126.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:27.243Z,1520564127.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:27.639Z,1520564127.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:28.049Z,1520564128.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:28.448Z,1520564128.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:28.832Z,1520564128.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:29.238Z,1520564129.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:29.634Z,1520564129.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:30.035Z,1520564130.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:30.438Z,1520564130.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:30.838Z,1520564130.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:31.232Z,1520564131.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:31.644Z,1520564131.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:32.042Z,1520564132.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:32.442Z,1520564132.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:32.839Z,1520564132.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:33.240Z,1520564133.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:33.639Z,1520564133.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:34.043Z,1520564134.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:34.449Z,1520564134.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:34.853Z,1520564134.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:35.246Z,1520564135.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:35.648Z,1520564135.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:36.035Z,1520564136.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:36.453Z,1520564136.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:36.851Z,1520564136.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:37.235Z,1520564137.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:37.654Z,1520564137.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:38.053Z,1520564138.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:38.450Z,1520564138.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:38.842Z,1520564138.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:39.244Z,1520564139.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:39.638Z,1520564139.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:40.042Z,1520564140.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:40.441Z,1520564140.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:40.844Z,1520564140.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:41.241Z,1520564141.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:41.643Z,1520564141.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:42.061Z,1520564142.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:42.439Z,1520564142.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:42.875Z,1520564142.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:43.240Z,1520564143.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:43.649Z,1520564143.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:44.057Z,1520564144.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:44.119Z,1520564144.119 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-09T02:55:44.119Z,1520564144.119 [Default:CheckIn:C.Wait] Stopped
2018-03-09T02:55:44.119Z,1520564144.119 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-09T02:55:44.119Z,1520564144.119 [Default:CheckIn:D] Running Loop=1
2018-03-09T02:55:44.441Z,1520564144.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:44.505Z,1520564144.505 [Default:CheckIn:D] Stopped
2018-03-09T02:55:44.505Z,1520564144.505 [Default:CheckIn:E] Running Loop=1
2018-03-09T02:55:44.847Z,1520564144.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:44.884Z,1520564144.884 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1149.995052 min 
2018-03-09T02:55:44.884Z,1520564144.884 [Default:CheckIn:E] Stopped
2018-03-09T02:55:44.884Z,1520564144.884 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-09T02:55:44.884Z,1520564144.884 [Default:CheckIn] Stopped
2018-03-09T02:55:44.885Z,1520564144.885 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-09T02:55:44.885Z,1520564144.885 [Default:CheckIn](INFO): Running loop #116
2018-03-09T02:55:44.885Z,1520564144.885 [Default:CheckIn] Running Loop=116
2018-03-09T02:55:44.885Z,1520564144.885 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-09T02:55:44.885Z,1520564144.885 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-09T02:55:48.581Z,1520564148.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:48.671Z,1520564148.671 [NAL9602](INFO): Powering up
2018-03-09T02:55:48.688Z,1520564148.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:49.090Z,1520564149.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:49.489Z,1520564149.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:49.890Z,1520564149.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:50.291Z,1520564150.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:50.688Z,1520564150.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:51.089Z,1520564151.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:51.491Z,1520564151.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:51.890Z,1520564151.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:52.293Z,1520564152.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:52.690Z,1520564152.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:53.090Z,1520564153.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:53.487Z,1520564153.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:53.889Z,1520564153.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:54.293Z,1520564154.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:54.687Z,1520564154.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:55.089Z,1520564155.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:55.493Z,1520564155.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:55.890Z,1520564155.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:56.291Z,1520564156.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:56.690Z,1520564156.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:57.090Z,1520564157.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:57.490Z,1520564157.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:57.890Z,1520564157.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:58.290Z,1520564158.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:58.690Z,1520564158.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:59.094Z,1520564159.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:59.495Z,1520564159.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:55:59.866Z,1520564159.866 [NAL9602](INFO): NAL9602 initialized
2018-03-09T02:55:59.892Z,1520564159.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:00.291Z,1520564160.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:00.698Z,1520564160.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:01.117Z,1520564161.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:01.506Z,1520564161.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:01.878Z,1520564161.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:02.294Z,1520564162.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:02.684Z,1520564162.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:03.082Z,1520564163.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:03.484Z,1520564163.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:03.883Z,1520564163.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:04.280Z,1520564164.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:04.684Z,1520564164.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:05.083Z,1520564165.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:05.483Z,1520564165.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:05.891Z,1520564165.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:06.291Z,1520564166.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:06.687Z,1520564166.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:07.091Z,1520564167.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:07.492Z,1520564167.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:07.895Z,1520564167.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:08.295Z,1520564168.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:08.692Z,1520564168.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:09.085Z,1520564169.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:09.491Z,1520564169.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:09.892Z,1520564169.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:10.295Z,1520564170.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:10.696Z,1520564170.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:11.093Z,1520564171.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:11.480Z,1520564171.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:11.903Z,1520564171.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:12.282Z,1520564172.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:12.676Z,1520564172.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:13.082Z,1520564173.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:13.478Z,1520564173.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:13.886Z,1520564173.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:14.282Z,1520564174.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:14.690Z,1520564174.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:15.078Z,1520564175.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:15.487Z,1520564175.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:15.887Z,1520564175.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:16.290Z,1520564176.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:16.698Z,1520564176.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:17.088Z,1520564177.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:17.491Z,1520564177.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:17.892Z,1520564177.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:18.288Z,1520564178.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:18.690Z,1520564178.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:19.098Z,1520564179.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:19.495Z,1520564179.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:19.896Z,1520564179.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:20.292Z,1520564180.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:20.692Z,1520564180.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:21.087Z,1520564181.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:21.491Z,1520564181.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:21.892Z,1520564181.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:22.291Z,1520564182.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:22.691Z,1520564182.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:23.092Z,1520564183.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:23.490Z,1520564183.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:23.890Z,1520564183.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:24.291Z,1520564184.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:24.689Z,1520564184.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:25.100Z,1520564185.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:25.491Z,1520564185.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:25.889Z,1520564185.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:26.281Z,1520564186.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:26.682Z,1520564186.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:27.080Z,1520564187.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:27.486Z,1520564187.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:27.882Z,1520564187.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:28.282Z,1520564188.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:28.682Z,1520564188.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:29.082Z,1520564189.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:29.480Z,1520564189.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:29.886Z,1520564189.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:30.282Z,1520564190.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:30.678Z,1520564190.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:31.102Z,1520564191.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:31.482Z,1520564191.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:31.870Z,1520564191.870 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-09T02:56:31.952Z,1520564191.952 [NAL9602](FAULT): received: 
+CSQ:0

OK12, 2, 0, 0, 0

OK
2018-03-09T02:56:31.953Z,1520564191.953 [NAL9602] Data Fault, FailCount= 1
2018-03-09T02:56:31.953Z,1520564191.953 [NAL9602](ERROR): Data Fault
2018-03-09T02:56:31.970Z,1520564191.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:32.040Z,1520564192.040 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-09T02:56:32.266Z,1520564192.266 [NAL9602](INFO): Powering down
2018-03-09T02:56:32.283Z,1520564192.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:32.698Z,1520564192.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:33.083Z,1520564193.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:33.133Z,1520564193.133 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-09T02:56:33.133Z,1520564193.133 [NAL9602] No Fault, FailCount= 1
2018-03-09T02:56:33.490Z,1520564193.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:33.886Z,1520564193.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:34.290Z,1520564194.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:34.690Z,1520564194.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:35.087Z,1520564195.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:35.486Z,1520564195.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:35.889Z,1520564195.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:36.290Z,1520564196.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:36.691Z,1520564196.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:37.099Z,1520564197.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:37.493Z,1520564197.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:37.890Z,1520564197.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:38.298Z,1520564198.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:38.691Z,1520564198.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:39.090Z,1520564199.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:39.499Z,1520564199.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:39.894Z,1520564199.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:40.290Z,1520564200.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:40.690Z,1520564200.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:41.090Z,1520564201.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:41.489Z,1520564201.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:41.894Z,1520564201.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:42.295Z,1520564202.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:42.675Z,1520564202.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:43.090Z,1520564203.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:43.491Z,1520564203.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:43.890Z,1520564203.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:44.290Z,1520564204.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:44.691Z,1520564204.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:45.089Z,1520564205.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:45.490Z,1520564205.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:48.705Z,1520564208.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:48.816Z,1520564208.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:49.215Z,1520564209.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:49.611Z,1520564209.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:50.015Z,1520564210.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:50.414Z,1520564210.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:50.803Z,1520564210.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:51.195Z,1520564211.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:51.602Z,1520564211.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:52.001Z,1520564212.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:52.402Z,1520564212.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:52.802Z,1520564212.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:53.210Z,1520564213.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:53.599Z,1520564213.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:54.009Z,1520564214.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:54.406Z,1520564214.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:54.806Z,1520564214.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:55.210Z,1520564215.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:55.619Z,1520564215.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:56.010Z,1520564216.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:56.409Z,1520564216.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:56.805Z,1520564216.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:57.198Z,1520564217.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:57.602Z,1520564217.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:58.006Z,1520564218.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:58.407Z,1520564218.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:58.810Z,1520564218.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:59.209Z,1520564219.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:56:59.610Z,1520564219.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:00.022Z,1520564220.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:00.403Z,1520564220.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:00.806Z,1520564220.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:01.202Z,1520564221.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:01.607Z,1520564221.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:02.002Z,1520564222.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:02.390Z,1520564222.390 [NAL9602](INFO): Powering up NAL9602
2018-03-09T02:57:02.408Z,1520564222.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:02.806Z,1520564222.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:03.206Z,1520564223.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:03.610Z,1520564223.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:04.010Z,1520564224.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:04.410Z,1520564224.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:04.814Z,1520564224.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:05.202Z,1520564225.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:05.598Z,1520564225.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:06.002Z,1520564226.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:06.406Z,1520564226.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:06.811Z,1520564226.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:07.211Z,1520564227.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:07.608Z,1520564227.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:08.018Z,1520564228.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:08.409Z,1520564228.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:08.799Z,1520564228.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:09.225Z,1520564229.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:09.603Z,1520564229.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:09.999Z,1520564229.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:10.406Z,1520564230.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:10.802Z,1520564230.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:11.202Z,1520564231.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:11.598Z,1520564231.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:12.006Z,1520564232.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:12.406Z,1520564232.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:12.806Z,1520564232.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:13.220Z,1520564233.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:13.583Z,1520564233.583 [NAL9602](INFO): NAL9602 initialized
2018-03-09T02:57:13.600Z,1520564233.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:14.003Z,1520564234.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:14.413Z,1520564234.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:14.825Z,1520564234.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:15.237Z,1520564235.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:15.610Z,1520564235.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:16.003Z,1520564236.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:16.407Z,1520564236.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:16.825Z,1520564236.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:17.209Z,1520564237.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:17.613Z,1520564237.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:18.019Z,1520564238.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:18.410Z,1520564238.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:18.809Z,1520564238.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:19.202Z,1520564239.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:19.596Z,1520564239.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:20.002Z,1520564240.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:20.402Z,1520564240.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:20.798Z,1520564240.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:21.214Z,1520564241.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:21.617Z,1520564241.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:22.016Z,1520564242.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:22.420Z,1520564242.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:22.821Z,1520564242.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:23.196Z,1520564243.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:23.603Z,1520564243.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:24.002Z,1520564244.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:24.406Z,1520564244.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:24.822Z,1520564244.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:25.206Z,1520564245.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:25.603Z,1520564245.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:26.002Z,1520564246.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:26.402Z,1520564246.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:26.821Z,1520564246.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:27.244Z,1520564247.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:27.621Z,1520564247.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:28.009Z,1520564248.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:28.407Z,1520564248.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:28.811Z,1520564248.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:29.210Z,1520564249.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:29.229Z,1520564249.229 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T02:57:29.229Z,1520564249.229 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 44
2018-03-09T02:57:29.229Z,1520564249.229 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T02:57:29.242Z,1520564249.242 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T02:57:29.611Z,1520564249.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:29.643Z,1520564249.643 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T02:57:29.643Z,1520564249.643 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 44
2018-03-09T02:57:30.002Z,1520564250.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:30.042Z,1520564250.042 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T02:57:30.042Z,1520564250.042 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T02:57:30.043Z,1520564250.043 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T02:57:30.407Z,1520564250.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:30.801Z,1520564250.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:31.202Z,1520564251.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:31.598Z,1520564251.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:32.022Z,1520564252.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:32.413Z,1520564252.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:32.825Z,1520564252.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:33.221Z,1520564253.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:33.614Z,1520564253.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:34.008Z,1520564254.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:34.412Z,1520564254.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:34.809Z,1520564254.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:35.199Z,1520564255.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:35.603Z,1520564255.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:36.003Z,1520564256.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:36.398Z,1520564256.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:36.807Z,1520564256.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:37.222Z,1520564257.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:37.614Z,1520564257.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:38.017Z,1520564258.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:38.422Z,1520564258.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:38.812Z,1520564258.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:39.211Z,1520564259.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:39.620Z,1520564259.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:40.006Z,1520564260.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:40.414Z,1520564260.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:40.802Z,1520564260.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:41.198Z,1520564261.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:41.606Z,1520564261.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:42.002Z,1520564262.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:42.413Z,1520564262.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:42.833Z,1520564262.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:43.239Z,1520564263.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:43.618Z,1520564263.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:44.004Z,1520564264.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:44.404Z,1520564264.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:44.804Z,1520564264.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:45.202Z,1520564265.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:49.105Z,1520564269.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:49.231Z,1520564269.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:49.629Z,1520564269.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:50.014Z,1520564270.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:50.408Z,1520564270.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:50.806Z,1520564270.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:51.215Z,1520564271.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:51.594Z,1520564271.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:52.019Z,1520564272.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:52.398Z,1520564272.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:52.798Z,1520564272.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:53.206Z,1520564273.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:53.607Z,1520564273.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:54.012Z,1520564274.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:54.420Z,1520564274.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:54.821Z,1520564274.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:55.212Z,1520564275.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:55.602Z,1520564275.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:55.998Z,1520564275.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:56.399Z,1520564276.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:56.798Z,1520564276.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:57.199Z,1520564277.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:57.602Z,1520564277.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:57.998Z,1520564277.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:58.398Z,1520564278.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:58.798Z,1520564278.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:59.226Z,1520564279.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:57:59.609Z,1520564279.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:00.017Z,1520564280.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:00.417Z,1520564280.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:00.794Z,1520564280.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:01.211Z,1520564281.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:01.598Z,1520564281.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:01.998Z,1520564281.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:02.402Z,1520564282.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:02.798Z,1520564282.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:03.223Z,1520564283.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:03.602Z,1520564283.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:04.002Z,1520564284.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:04.413Z,1520564284.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:04.824Z,1520564284.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:05.233Z,1520564285.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:05.609Z,1520564285.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:06.003Z,1520564286.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:06.401Z,1520564286.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:06.807Z,1520564286.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:07.198Z,1520564287.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:07.598Z,1520564287.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:07.998Z,1520564287.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:08.398Z,1520564288.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:08.798Z,1520564288.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:09.244Z,1520564289.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:09.621Z,1520564289.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:10.021Z,1520564290.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:10.413Z,1520564290.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:10.814Z,1520564290.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:11.201Z,1520564291.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:11.611Z,1520564291.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:12.011Z,1520564292.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:12.398Z,1520564292.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:12.798Z,1520564292.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:13.198Z,1520564293.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:13.602Z,1520564293.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:14.002Z,1520564294.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:14.405Z,1520564294.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:14.813Z,1520564294.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:15.221Z,1520564295.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:15.613Z,1520564295.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:16.030Z,1520564296.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:16.398Z,1520564296.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:16.806Z,1520564296.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:17.206Z,1520564297.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:17.603Z,1520564297.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:18.007Z,1520564298.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:18.404Z,1520564298.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:18.807Z,1520564298.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:19.207Z,1520564299.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:19.610Z,1520564299.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:20.018Z,1520564300.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:20.422Z,1520564300.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:20.829Z,1520564300.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:21.209Z,1520564301.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:21.602Z,1520564301.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:22.006Z,1520564302.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:22.399Z,1520564302.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:22.809Z,1520564302.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:23.207Z,1520564303.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:23.608Z,1520564303.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:24.008Z,1520564304.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:24.401Z,1520564304.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:24.812Z,1520564304.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:25.222Z,1520564305.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:25.618Z,1520564305.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:26.032Z,1520564306.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:26.422Z,1520564306.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:26.806Z,1520564306.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:27.203Z,1520564307.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:27.600Z,1520564307.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:28.007Z,1520564308.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:28.409Z,1520564308.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:28.801Z,1520564308.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:29.198Z,1520564309.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:29.598Z,1520564309.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:29.998Z,1520564309.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:30.409Z,1520564310.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:30.809Z,1520564310.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:31.209Z,1520564311.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:31.609Z,1520564311.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:31.999Z,1520564311.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:32.402Z,1520564312.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:32.802Z,1520564312.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:33.198Z,1520564313.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:33.596Z,1520564313.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:33.999Z,1520564313.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:34.403Z,1520564314.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:34.798Z,1520564314.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:35.198Z,1520564315.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:35.622Z,1520564315.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:36.009Z,1520564316.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:36.409Z,1520564316.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:36.809Z,1520564316.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:37.199Z,1520564317.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:37.603Z,1520564317.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:38.006Z,1520564318.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:38.406Z,1520564318.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:38.807Z,1520564318.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:39.211Z,1520564319.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:39.596Z,1520564319.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:39.998Z,1520564319.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:40.394Z,1520564320.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:40.810Z,1520564320.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:41.209Z,1520564321.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:41.609Z,1520564321.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:42.009Z,1520564322.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:42.406Z,1520564322.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:42.807Z,1520564322.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:43.194Z,1520564323.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:43.602Z,1520564323.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:43.998Z,1520564323.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:44.398Z,1520564324.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:44.798Z,1520564324.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:45.201Z,1520564325.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:45.606Z,1520564325.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:48.917Z,1520564328.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:49.045Z,1520564329.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:49.441Z,1520564329.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:49.830Z,1520564329.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:50.210Z,1520564330.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:50.615Z,1520564330.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:51.014Z,1520564331.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:51.414Z,1520564331.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:51.812Z,1520564331.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:52.219Z,1520564332.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:52.605Z,1520564332.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:53.014Z,1520564333.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:53.416Z,1520564333.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:53.820Z,1520564333.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:54.224Z,1520564334.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:54.629Z,1520564334.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:55.025Z,1520564335.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:55.427Z,1520564335.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:55.806Z,1520564335.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:56.207Z,1520564336.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:56.626Z,1520564336.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:57.006Z,1520564337.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:57.402Z,1520564337.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:57.810Z,1520564337.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:58.207Z,1520564338.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:58.604Z,1520564338.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:59.017Z,1520564339.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:59.420Z,1520564339.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:58:59.817Z,1520564339.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:00.222Z,1520564340.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:00.611Z,1520564340.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:01.016Z,1520564341.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:01.414Z,1520564341.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:01.837Z,1520564341.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:02.211Z,1520564342.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:02.614Z,1520564342.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:03.012Z,1520564343.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:03.410Z,1520564343.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:03.814Z,1520564343.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:04.229Z,1520564344.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:04.617Z,1520564344.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:05.022Z,1520564345.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:05.417Z,1520564345.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:05.816Z,1520564345.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:06.219Z,1520564346.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:06.615Z,1520564346.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:07.005Z,1520564347.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:07.417Z,1520564347.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:07.829Z,1520564347.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:08.204Z,1520564348.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:08.606Z,1520564348.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:09.032Z,1520564349.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:09.431Z,1520564349.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:09.819Z,1520564349.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:10.231Z,1520564350.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:10.618Z,1520564350.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:11.006Z,1520564351.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:11.414Z,1520564351.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:11.814Z,1520564351.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:12.214Z,1520564352.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:12.614Z,1520564352.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:13.014Z,1520564353.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:13.418Z,1520564353.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:13.814Z,1520564353.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:14.207Z,1520564354.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:14.644Z,1520564354.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:15.025Z,1520564355.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:15.421Z,1520564355.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:15.839Z,1520564355.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:16.218Z,1520564356.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:16.611Z,1520564356.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:17.011Z,1520564357.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:17.411Z,1520564357.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:17.815Z,1520564357.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:18.215Z,1520564358.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:18.615Z,1520564358.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:19.021Z,1520564359.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:19.425Z,1520564359.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:19.825Z,1520564359.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:20.229Z,1520564360.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:20.629Z,1520564360.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:21.030Z,1520564361.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:21.406Z,1520564361.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:21.806Z,1520564361.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:22.224Z,1520564362.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:22.606Z,1520564362.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:23.006Z,1520564363.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:23.403Z,1520564363.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:23.817Z,1520564363.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:24.222Z,1520564364.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:24.603Z,1520564364.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:25.030Z,1520564365.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:25.427Z,1520564365.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:25.828Z,1520564365.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:26.231Z,1520564366.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:26.606Z,1520564366.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:27.010Z,1520564367.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:27.406Z,1520564367.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:27.814Z,1520564367.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:28.211Z,1520564368.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:28.614Z,1520564368.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:29.016Z,1520564369.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:29.411Z,1520564369.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:29.812Z,1520564369.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:30.233Z,1520564370.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:30.621Z,1520564370.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:31.025Z,1520564371.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:31.423Z,1520564371.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:31.815Z,1520564371.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:32.217Z,1520564372.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:32.614Z,1520564372.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:33.015Z,1520564373.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:33.414Z,1520564373.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:33.811Z,1520564373.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:34.215Z,1520564374.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:34.614Z,1520564374.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:35.023Z,1520564375.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:35.429Z,1520564375.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:35.826Z,1520564375.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:36.228Z,1520564376.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:36.626Z,1520564376.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:37.006Z,1520564377.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:37.406Z,1520564377.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:37.806Z,1520564377.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:38.206Z,1520564378.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:38.621Z,1520564378.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:39.002Z,1520564379.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:39.402Z,1520564379.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:39.806Z,1520564379.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:40.206Z,1520564380.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:40.630Z,1520564380.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:41.079Z,1520564381.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:41.426Z,1520564381.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:41.827Z,1520564381.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:42.239Z,1520564382.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:42.620Z,1520564382.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:43.019Z,1520564383.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:43.444Z,1520564383.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:43.806Z,1520564383.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:44.206Z,1520564384.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:44.606Z,1520564384.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:45.029Z,1520564385.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:45.407Z,1520564385.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:45.823Z,1520564385.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:49.149Z,1520564389.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:49.309Z,1520564389.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:49.659Z,1520564389.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:50.054Z,1520564390.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:50.458Z,1520564390.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:50.852Z,1520564390.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:51.243Z,1520564391.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:51.638Z,1520564391.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:52.039Z,1520564392.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:52.445Z,1520564392.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:52.842Z,1520564392.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:53.238Z,1520564393.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:53.666Z,1520564393.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:54.062Z,1520564394.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:54.481Z,1520564394.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:54.859Z,1520564394.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:55.244Z,1520564395.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:55.646Z,1520564395.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:56.046Z,1520564396.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:56.443Z,1520564396.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:56.844Z,1520564396.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:57.250Z,1520564397.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:57.642Z,1520564397.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:58.043Z,1520564398.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:58.439Z,1520564398.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:58.862Z,1520564398.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:59.257Z,1520564399.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T02:59:59.666Z,1520564399.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:00.065Z,1520564400.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:00.445Z,1520564400.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:00.846Z,1520564400.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:01.238Z,1520564401.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:01.644Z,1520564401.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:02.041Z,1520564402.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:02.438Z,1520564402.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:02.838Z,1520564402.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:03.245Z,1520564403.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:03.645Z,1520564403.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:04.057Z,1520564404.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:04.459Z,1520564404.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:04.863Z,1520564404.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:05.261Z,1520564405.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:05.647Z,1520564405.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:06.044Z,1520564406.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:06.450Z,1520564406.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:06.851Z,1520564406.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:07.246Z,1520564407.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:07.643Z,1520564407.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:08.055Z,1520564408.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:08.448Z,1520564408.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:08.841Z,1520564408.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:09.266Z,1520564409.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:09.657Z,1520564409.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:10.059Z,1520564410.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:10.464Z,1520564410.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:10.840Z,1520564410.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:11.239Z,1520564411.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:11.641Z,1520564411.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:12.042Z,1520564412.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:12.443Z,1520564412.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:12.834Z,1520564412.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:13.244Z,1520564413.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:13.642Z,1520564413.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:14.034Z,1520564414.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:14.463Z,1520564414.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:14.851Z,1520564414.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:15.268Z,1520564415.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:15.665Z,1520564415.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:16.052Z,1520564416.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:16.450Z,1520564416.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:16.846Z,1520564416.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:17.244Z,1520564417.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:17.648Z,1520564417.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:18.052Z,1520564418.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:18.450Z,1520564418.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:18.845Z,1520564418.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:19.255Z,1520564419.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:19.662Z,1520564419.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:20.058Z,1520564420.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:20.463Z,1520564420.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:20.861Z,1520564420.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:21.251Z,1520564421.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:21.638Z,1520564421.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:22.043Z,1520564422.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:22.444Z,1520564422.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:22.844Z,1520564422.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:23.240Z,1520564423.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:23.643Z,1520564423.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:24.033Z,1520564424.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:24.446Z,1520564424.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:24.868Z,1520564424.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:25.254Z,1520564425.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:25.665Z,1520564425.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:26.066Z,1520564426.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:26.446Z,1520564426.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:26.840Z,1520564426.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:27.249Z,1520564427.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:27.642Z,1520564427.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:28.047Z,1520564428.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:28.448Z,1520564428.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:28.836Z,1520564428.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:29.254Z,1520564429.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:29.634Z,1520564429.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:30.050Z,1520564430.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:30.102Z,1520564430.102 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T03:00:30.103Z,1520564430.103 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 45
2018-03-09T03:00:30.103Z,1520564430.103 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T03:00:30.124Z,1520564430.124 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T03:00:30.459Z,1520564430.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:30.534Z,1520564430.534 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T03:00:30.534Z,1520564430.534 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 45
2018-03-09T03:00:30.853Z,1520564430.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:30.887Z,1520564430.887 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T03:00:30.888Z,1520564430.888 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T03:00:30.888Z,1520564430.888 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T03:00:31.253Z,1520564431.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:31.647Z,1520564431.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:32.053Z,1520564432.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:32.442Z,1520564432.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:32.846Z,1520564432.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:33.244Z,1520564433.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:33.635Z,1520564433.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:34.053Z,1520564434.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:34.451Z,1520564434.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:34.851Z,1520564434.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:35.261Z,1520564435.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:35.659Z,1520564435.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:36.052Z,1520564436.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:36.466Z,1520564436.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:36.839Z,1520564436.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:37.239Z,1520564437.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:37.638Z,1520564437.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:38.042Z,1520564438.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:38.439Z,1520564438.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:38.840Z,1520564438.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:39.239Z,1520564439.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:39.632Z,1520564439.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:40.037Z,1520564440.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:40.453Z,1520564440.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:40.853Z,1520564440.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:41.263Z,1520564441.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:41.659Z,1520564441.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:42.041Z,1520564442.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:42.443Z,1520564442.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:42.843Z,1520564442.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:43.232Z,1520564443.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:43.645Z,1520564443.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:44.042Z,1520564444.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:44.438Z,1520564444.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:44.849Z,1520564444.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:44.889Z,1520564444.889 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-09T02:55:44.9Z
2018-03-09T03:00:44.889Z,1520564444.889 [Default:CheckIn:Read_GPS] Stopped
2018-03-09T03:00:44.889Z,1520564444.889 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-09T03:00:45.246Z,1520564445.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:45.757Z,1520564445.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:46.051Z,1520564446.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:49.398Z,1520564449.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:49.522Z,1520564449.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:49.873Z,1520564449.873 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0464.lzma
2018-03-09T03:00:49.905Z,1520564449.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:50.299Z,1520564450.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:50.673Z,1520564450.673 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0464.lzma.bak
2018-03-09T03:00:50.673Z,1520564450.673 [DataOverHttps](INFO): SBD MOMSN=7991661
2018-03-09T03:00:50.721Z,1520564450.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:51.321Z,1520564451.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:51.517Z,1520564451.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:54.773Z,1520564454.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:54.919Z,1520564454.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:55.264Z,1520564455.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:55.650Z,1520564455.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:56.073Z,1520564456.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:56.482Z,1520564456.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:00:56.901Z,1520564456.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:00.010Z,1520564460.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:00.126Z,1520564460.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:00.460Z,1520564460.460 [DataOverHttps](INFO): Sending 237 bytes from file Logs/20180308T074127/Express0465.lzma
2018-03-09T03:01:00.521Z,1520564460.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:00.885Z,1520564460.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:01.256Z,1520564461.256 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0465.lzma.bak
2018-03-09T03:01:01.256Z,1520564461.256 [DataOverHttps](INFO): SBD MOMSN=7991663
2018-03-09T03:01:01.324Z,1520564461.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:01.930Z,1520564461.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:01.950Z,1520564461.950 [Default:CheckIn:Read_Iridium] Stopped
2018-03-09T03:01:01.950Z,1520564461.950 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-09T03:01:01.950Z,1520564461.950 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-09T03:01:02.089Z,1520564462.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:02.502Z,1520564462.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:05.703Z,1520564465.703 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-09T03:01:05.732Z,1520564465.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:05.844Z,1520564465.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:06.241Z,1520564466.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:06.640Z,1520564466.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:07.041Z,1520564467.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:07.438Z,1520564467.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:07.847Z,1520564467.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:08.239Z,1520564468.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:08.647Z,1520564468.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:09.044Z,1520564469.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:09.426Z,1520564469.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:09.843Z,1520564469.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:10.251Z,1520564470.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:10.625Z,1520564470.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:11.030Z,1520564471.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:11.431Z,1520564471.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:11.825Z,1520564471.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:12.230Z,1520564472.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:12.634Z,1520564472.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:13.027Z,1520564473.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:13.430Z,1520564473.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:13.834Z,1520564473.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:14.230Z,1520564474.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:14.646Z,1520564474.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:15.031Z,1520564475.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:15.437Z,1520564475.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:15.838Z,1520564475.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:16.239Z,1520564476.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:16.634Z,1520564476.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:17.046Z,1520564477.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:17.435Z,1520564477.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:17.834Z,1520564477.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:18.235Z,1520564478.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:18.630Z,1520564478.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:19.033Z,1520564479.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:19.435Z,1520564479.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:19.833Z,1520564479.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:20.234Z,1520564480.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:20.635Z,1520564480.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:21.035Z,1520564481.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:21.438Z,1520564481.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:21.837Z,1520564481.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:22.238Z,1520564482.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:22.638Z,1520564482.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:23.034Z,1520564483.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:23.431Z,1520564483.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:23.838Z,1520564483.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:24.238Z,1520564484.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:24.633Z,1520564484.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:25.031Z,1520564485.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:25.437Z,1520564485.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:25.833Z,1520564485.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:26.238Z,1520564486.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:26.637Z,1520564486.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:27.041Z,1520564487.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:27.443Z,1520564487.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:27.836Z,1520564487.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:28.238Z,1520564488.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:28.642Z,1520564488.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:29.047Z,1520564489.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:29.435Z,1520564489.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:29.838Z,1520564489.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:30.238Z,1520564490.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:30.637Z,1520564490.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:31.038Z,1520564491.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:31.448Z,1520564491.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:31.842Z,1520564491.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:32.243Z,1520564492.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:32.638Z,1520564492.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:33.033Z,1520564493.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:33.442Z,1520564493.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:33.838Z,1520564493.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:34.237Z,1520564494.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:34.638Z,1520564494.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:35.047Z,1520564495.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:35.435Z,1520564495.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:35.831Z,1520564495.831 [NAL9602](INFO): Powering down
2018-03-09T03:01:35.849Z,1520564495.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:36.251Z,1520564496.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:36.623Z,1520564496.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:37.050Z,1520564497.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:37.450Z,1520564497.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:37.842Z,1520564497.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:38.230Z,1520564498.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:38.642Z,1520564498.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:39.031Z,1520564499.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:39.444Z,1520564499.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:39.831Z,1520564499.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:40.243Z,1520564500.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:40.631Z,1520564500.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:41.031Z,1520564501.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:41.445Z,1520564501.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:41.832Z,1520564501.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:42.232Z,1520564502.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:42.631Z,1520564502.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:43.030Z,1520564503.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:43.432Z,1520564503.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:43.828Z,1520564503.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:44.232Z,1520564504.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:44.641Z,1520564504.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:45.036Z,1520564505.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:45.449Z,1520564505.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:45.845Z,1520564505.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:46.230Z,1520564506.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:46.644Z,1520564506.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:47.043Z,1520564507.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:47.431Z,1520564507.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:47.830Z,1520564507.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:48.230Z,1520564508.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:48.635Z,1520564508.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:49.041Z,1520564509.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:49.437Z,1520564509.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:49.832Z,1520564509.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:50.238Z,1520564510.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:50.635Z,1520564510.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:51.034Z,1520564511.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:51.435Z,1520564511.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:51.839Z,1520564511.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:52.237Z,1520564512.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:52.631Z,1520564512.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:53.034Z,1520564513.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:53.441Z,1520564513.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:53.834Z,1520564513.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:54.244Z,1520564514.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:54.642Z,1520564514.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:55.038Z,1520564515.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:55.448Z,1520564515.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:55.842Z,1520564515.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:56.238Z,1520564516.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:56.647Z,1520564516.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:57.025Z,1520564517.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:57.426Z,1520564517.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:57.850Z,1520564517.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:58.230Z,1520564518.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:58.630Z,1520564518.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:59.030Z,1520564519.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:59.430Z,1520564519.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:01:59.842Z,1520564519.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:00.247Z,1520564520.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:00.626Z,1520564520.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:01.026Z,1520564521.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:01.430Z,1520564521.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:01.834Z,1520564521.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:02.231Z,1520564522.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:02.630Z,1520564522.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:05.880Z,1520564525.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:06.006Z,1520564526.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:06.372Z,1520564526.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:06.770Z,1520564526.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:07.169Z,1520564527.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:07.570Z,1520564527.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:07.965Z,1520564527.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:08.366Z,1520564528.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:08.765Z,1520564528.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:09.170Z,1520564529.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:09.556Z,1520564529.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:09.611Z,1520564529.611 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-09T03:02:09.969Z,1520564529.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:10.371Z,1520564530.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:10.759Z,1520564530.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:11.182Z,1520564531.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:11.571Z,1520564531.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:11.970Z,1520564531.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:12.369Z,1520564532.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:12.769Z,1520564532.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:13.156Z,1520564533.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:13.562Z,1520564533.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:13.958Z,1520564533.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:14.359Z,1520564534.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:14.783Z,1520564534.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:15.158Z,1520564535.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:15.558Z,1520564535.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:15.981Z,1520564535.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:16.358Z,1520564536.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:16.762Z,1520564536.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:17.162Z,1520564537.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:17.562Z,1520564537.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:17.958Z,1520564537.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:18.382Z,1520564538.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:18.758Z,1520564538.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:19.156Z,1520564539.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:19.562Z,1520564539.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:19.962Z,1520564539.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:20.357Z,1520564540.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:20.766Z,1520564540.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:21.162Z,1520564541.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:21.559Z,1520564541.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:21.962Z,1520564541.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:22.373Z,1520564542.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:22.769Z,1520564542.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:23.178Z,1520564543.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:23.570Z,1520564543.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:23.970Z,1520564543.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:24.365Z,1520564544.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:24.798Z,1520564544.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:25.159Z,1520564545.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:25.565Z,1520564545.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:25.963Z,1520564545.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:26.374Z,1520564546.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:26.782Z,1520564546.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:27.158Z,1520564547.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:27.559Z,1520564547.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:27.962Z,1520564547.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:28.362Z,1520564548.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:28.760Z,1520564548.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:29.162Z,1520564549.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:29.566Z,1520564549.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:29.963Z,1520564549.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:30.363Z,1520564550.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:30.772Z,1520564550.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:31.167Z,1520564551.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:31.571Z,1520564551.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:31.971Z,1520564551.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:32.366Z,1520564552.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:32.769Z,1520564552.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:33.175Z,1520564553.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:33.568Z,1520564553.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:33.968Z,1520564553.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:34.366Z,1520564554.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:34.767Z,1520564554.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:35.179Z,1520564555.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:35.569Z,1520564555.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:35.970Z,1520564555.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:36.382Z,1520564556.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:36.762Z,1520564556.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:37.159Z,1520564557.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:37.584Z,1520564557.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:37.962Z,1520564557.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:38.359Z,1520564558.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:38.762Z,1520564558.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:39.162Z,1520564559.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:39.560Z,1520564559.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:39.975Z,1520564559.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:40.374Z,1520564560.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:40.760Z,1520564560.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:41.167Z,1520564561.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:41.567Z,1520564561.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:41.969Z,1520564561.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:42.370Z,1520564562.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:42.766Z,1520564562.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:43.168Z,1520564563.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:43.570Z,1520564563.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:43.966Z,1520564563.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:44.370Z,1520564564.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:44.779Z,1520564564.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:45.174Z,1520564565.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:45.570Z,1520564565.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:45.970Z,1520564565.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:46.374Z,1520564566.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:46.766Z,1520564566.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:47.182Z,1520564567.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:47.558Z,1520564567.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:47.958Z,1520564567.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:48.370Z,1520564568.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:48.770Z,1520564568.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:49.158Z,1520564569.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:49.570Z,1520564569.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:49.974Z,1520564569.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:50.371Z,1520564570.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:50.770Z,1520564570.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:51.170Z,1520564571.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:51.558Z,1520564571.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:51.971Z,1520564571.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:52.358Z,1520564572.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:52.770Z,1520564572.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:53.178Z,1520564573.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:53.557Z,1520564573.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:53.958Z,1520564573.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:54.374Z,1520564574.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:54.758Z,1520564574.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:55.162Z,1520564575.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:55.561Z,1520564575.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:55.982Z,1520564575.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:56.373Z,1520564576.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:56.768Z,1520564576.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:57.170Z,1520564577.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:57.567Z,1520564577.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:57.984Z,1520564577.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:58.370Z,1520564578.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:58.759Z,1520564578.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:59.182Z,1520564579.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:59.562Z,1520564579.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:02:59.974Z,1520564579.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:00.382Z,1520564580.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:00.774Z,1520564580.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:01.159Z,1520564581.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:01.563Z,1520564581.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:01.974Z,1520564581.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:02.357Z,1520564582.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:02.762Z,1520564582.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:06.109Z,1520564586.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:06.238Z,1520564586.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:06.588Z,1520564586.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:06.982Z,1520564586.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:07.386Z,1520564587.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:07.786Z,1520564587.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:08.182Z,1520564588.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:08.583Z,1520564588.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:08.986Z,1520564588.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:09.387Z,1520564589.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:09.782Z,1520564589.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:10.186Z,1520564590.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:10.586Z,1520564590.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:10.982Z,1520564590.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:11.392Z,1520564591.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:11.786Z,1520564591.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:12.183Z,1520564592.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:12.586Z,1520564592.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:12.982Z,1520564592.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:13.379Z,1520564593.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:13.795Z,1520564593.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:14.189Z,1520564594.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:14.583Z,1520564594.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:14.984Z,1520564594.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:15.382Z,1520564595.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:15.782Z,1520564595.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:16.185Z,1520564596.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:16.590Z,1520564596.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:16.990Z,1520564596.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:17.395Z,1520564597.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:17.790Z,1520564597.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:18.187Z,1520564598.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:18.595Z,1520564598.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:18.991Z,1520564598.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:19.382Z,1520564599.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:19.795Z,1520564599.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:20.190Z,1520564600.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:20.589Z,1520564600.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:20.987Z,1520564600.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:21.390Z,1520564601.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:21.783Z,1520564601.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:22.185Z,1520564602.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:22.586Z,1520564602.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:22.986Z,1520564602.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:23.386Z,1520564603.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:23.787Z,1520564603.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:24.186Z,1520564604.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:24.586Z,1520564604.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:24.994Z,1520564604.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:25.374Z,1520564605.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:25.789Z,1520564605.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:26.198Z,1520564606.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:26.574Z,1520564606.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:26.974Z,1520564606.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:27.378Z,1520564607.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:27.792Z,1520564607.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:28.179Z,1520564608.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:28.591Z,1520564608.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:28.975Z,1520564608.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:29.382Z,1520564609.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:29.779Z,1520564609.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:30.178Z,1520564610.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:30.579Z,1520564610.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:31.001Z,1520564611.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:31.020Z,1520564611.020 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T03:03:31.020Z,1520564611.020 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 46
2018-03-09T03:03:31.020Z,1520564611.020 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T03:03:31.049Z,1520564611.049 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T03:03:31.377Z,1520564611.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:31.425Z,1520564611.425 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T03:03:31.425Z,1520564611.425 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 46
2018-03-09T03:03:31.803Z,1520564611.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:31.820Z,1520564611.820 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T03:03:31.820Z,1520564611.820 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T03:03:31.821Z,1520564611.821 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T03:03:32.178Z,1520564612.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:32.583Z,1520564612.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:32.977Z,1520564612.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:33.382Z,1520564613.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:33.778Z,1520564613.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:34.185Z,1520564614.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:34.586Z,1520564614.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:34.979Z,1520564614.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:35.385Z,1520564615.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:35.783Z,1520564615.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:36.187Z,1520564616.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:36.587Z,1520564616.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:36.984Z,1520564616.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:37.392Z,1520564617.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:37.787Z,1520564617.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:38.181Z,1520564618.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:38.588Z,1520564618.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:38.996Z,1520564618.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:39.381Z,1520564619.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:39.787Z,1520564619.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:40.185Z,1520564620.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:40.571Z,1520564620.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:40.985Z,1520564620.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:41.386Z,1520564621.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:41.775Z,1520564621.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:42.183Z,1520564622.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:42.586Z,1520564622.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:42.974Z,1520564622.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:43.374Z,1520564623.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:43.782Z,1520564623.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:44.175Z,1520564624.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:44.578Z,1520564624.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:44.978Z,1520564624.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:45.378Z,1520564625.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:45.778Z,1520564625.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:46.183Z,1520564626.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:46.575Z,1520564626.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:46.986Z,1520564626.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:47.378Z,1520564627.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:47.775Z,1520564627.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:48.183Z,1520564628.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:48.582Z,1520564628.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:48.988Z,1520564628.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:49.385Z,1520564629.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:49.786Z,1520564629.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:50.182Z,1520564630.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:50.580Z,1520564630.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:50.985Z,1520564630.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:51.383Z,1520564631.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:51.790Z,1520564631.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:52.230Z,1520564632.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:52.579Z,1520564632.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:52.986Z,1520564632.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:53.385Z,1520564633.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:53.784Z,1520564633.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:54.182Z,1520564634.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:54.585Z,1520564634.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:54.986Z,1520564634.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:55.386Z,1520564635.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:55.786Z,1520564635.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:56.182Z,1520564636.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:56.590Z,1520564636.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:56.986Z,1520564636.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:57.379Z,1520564637.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:57.786Z,1520564637.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:58.192Z,1520564638.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:58.584Z,1520564638.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:58.987Z,1520564638.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:59.396Z,1520564639.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:03:59.779Z,1520564639.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:00.186Z,1520564640.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:00.595Z,1520564640.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:00.983Z,1520564640.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:01.396Z,1520564641.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:01.786Z,1520564641.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:02.171Z,1520564642.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:02.589Z,1520564642.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:02.985Z,1520564642.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:06.248Z,1520564646.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:06.360Z,1520564646.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:06.753Z,1520564646.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:07.148Z,1520564647.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:07.554Z,1520564647.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:07.954Z,1520564647.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:08.349Z,1520564648.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:08.750Z,1520564648.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:09.150Z,1520564649.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:09.547Z,1520564649.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:09.950Z,1520564649.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:10.354Z,1520564650.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:10.748Z,1520564650.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:11.150Z,1520564651.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:11.548Z,1520564651.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:11.950Z,1520564651.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:12.350Z,1520564652.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:12.749Z,1520564652.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:13.145Z,1520564653.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:13.554Z,1520564653.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:13.950Z,1520564653.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:14.349Z,1520564654.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:14.755Z,1520564654.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:15.150Z,1520564655.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:15.547Z,1520564655.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:15.950Z,1520564655.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:16.350Z,1520564656.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:16.747Z,1520564656.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:17.154Z,1520564657.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:17.549Z,1520564657.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:17.949Z,1520564657.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:18.348Z,1520564658.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:18.741Z,1520564658.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:19.139Z,1520564659.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:19.565Z,1520564659.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:19.942Z,1520564659.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:20.337Z,1520564660.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:20.753Z,1520564660.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:21.159Z,1520564661.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:21.534Z,1520564661.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:21.956Z,1520564661.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:22.358Z,1520564662.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:22.747Z,1520564662.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:23.155Z,1520564663.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:23.547Z,1520564663.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:23.947Z,1520564663.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:24.348Z,1520564664.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:24.748Z,1520564664.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:25.141Z,1520564665.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:25.559Z,1520564665.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:25.945Z,1520564665.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:26.343Z,1520564666.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:26.742Z,1520564666.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:27.142Z,1520564667.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:27.537Z,1520564667.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:27.942Z,1520564667.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:28.342Z,1520564668.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:28.754Z,1520564668.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:29.144Z,1520564669.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:29.542Z,1520564669.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:29.937Z,1520564669.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:30.353Z,1520564670.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:30.742Z,1520564670.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:31.137Z,1520564671.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:31.553Z,1520564671.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:31.953Z,1520564671.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:32.341Z,1520564672.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:32.756Z,1520564672.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:33.143Z,1520564673.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:33.542Z,1520564673.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:33.943Z,1520564673.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:34.343Z,1520564674.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:34.743Z,1520564674.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:35.136Z,1520564675.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:35.563Z,1520564675.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:35.938Z,1520564675.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:36.338Z,1520564676.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:36.745Z,1520564676.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:37.137Z,1520564677.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:37.539Z,1520564677.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:37.942Z,1520564677.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:38.338Z,1520564678.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:38.740Z,1520564678.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:39.142Z,1520564679.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:39.547Z,1520564679.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:39.947Z,1520564679.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:40.358Z,1520564680.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:40.755Z,1520564680.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:41.143Z,1520564681.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:41.552Z,1520564681.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:41.945Z,1520564681.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:42.345Z,1520564682.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:42.746Z,1520564682.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:43.146Z,1520564683.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:43.547Z,1520564683.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:43.959Z,1520564683.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:44.337Z,1520564684.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:44.739Z,1520564684.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:45.154Z,1520564685.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:45.541Z,1520564685.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:45.941Z,1520564685.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:46.342Z,1520564686.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:46.742Z,1520564686.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:47.138Z,1520564687.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:47.542Z,1520564687.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:47.942Z,1520564687.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:48.346Z,1520564688.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:48.742Z,1520564688.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:49.138Z,1520564689.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:49.539Z,1520564689.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:49.946Z,1520564689.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:50.341Z,1520564690.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:50.736Z,1520564690.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:51.153Z,1520564691.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:51.547Z,1520564691.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:51.947Z,1520564691.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:52.347Z,1520564692.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:52.748Z,1520564692.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:53.147Z,1520564693.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:53.557Z,1520564693.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:53.950Z,1520564693.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:54.353Z,1520564694.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:54.759Z,1520564694.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:55.151Z,1520564695.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:55.547Z,1520564695.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:55.960Z,1520564695.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:56.342Z,1520564696.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:56.734Z,1520564696.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:57.146Z,1520564697.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:57.537Z,1520564697.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:57.946Z,1520564697.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:58.345Z,1520564698.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:58.739Z,1520564698.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:59.136Z,1520564699.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:59.568Z,1520564699.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:04:59.948Z,1520564699.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:00.349Z,1520564700.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:00.759Z,1520564700.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:01.147Z,1520564701.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:01.547Z,1520564701.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:01.959Z,1520564701.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:02.349Z,1520564702.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:02.749Z,1520564702.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:03.148Z,1520564703.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:06.351Z,1520564706.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:06.466Z,1520564706.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:06.862Z,1520564706.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:07.253Z,1520564707.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:07.654Z,1520564707.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:08.059Z,1520564708.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:08.454Z,1520564708.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:08.844Z,1520564708.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:09.249Z,1520564709.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:09.642Z,1520564709.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:10.053Z,1520564710.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:10.454Z,1520564710.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:10.848Z,1520564710.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:11.250Z,1520564711.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:11.648Z,1520564711.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:12.058Z,1520564712.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:12.456Z,1520564712.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:12.854Z,1520564712.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:13.251Z,1520564713.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:13.649Z,1520564713.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:14.062Z,1520564714.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:14.450Z,1520564714.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:14.849Z,1520564714.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:15.256Z,1520564715.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:15.661Z,1520564715.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:16.042Z,1520564716.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:16.446Z,1520564716.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:16.849Z,1520564716.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:17.242Z,1520564717.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:17.646Z,1520564717.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:18.042Z,1520564718.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:18.443Z,1520564718.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:18.848Z,1520564718.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:19.246Z,1520564719.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:19.644Z,1520564719.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:20.052Z,1520564720.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:20.459Z,1520564720.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:20.844Z,1520564720.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:21.258Z,1520564721.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:21.656Z,1520564721.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:22.051Z,1520564722.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:22.446Z,1520564722.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:22.841Z,1520564722.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:23.243Z,1520564723.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:23.648Z,1520564723.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:24.042Z,1520564724.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:24.442Z,1520564724.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:24.853Z,1520564724.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:25.256Z,1520564725.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:25.640Z,1520564725.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:26.052Z,1520564726.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:26.457Z,1520564726.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:26.850Z,1520564726.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:27.254Z,1520564727.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:27.657Z,1520564727.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:28.062Z,1520564728.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:28.456Z,1520564728.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:28.858Z,1520564728.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:29.240Z,1520564729.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:29.658Z,1520564729.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:30.058Z,1520564730.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:30.458Z,1520564730.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:30.849Z,1520564730.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:31.262Z,1520564731.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:31.642Z,1520564731.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:32.050Z,1520564732.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:32.450Z,1520564732.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:32.845Z,1520564732.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:33.249Z,1520564733.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:33.651Z,1520564733.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:34.057Z,1520564734.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:34.462Z,1520564734.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:34.856Z,1520564734.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:35.246Z,1520564735.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:35.655Z,1520564735.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:36.057Z,1520564736.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:36.456Z,1520564736.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:36.851Z,1520564736.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:37.256Z,1520564737.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:37.644Z,1520564737.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:38.057Z,1520564738.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:38.453Z,1520564738.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:38.851Z,1520564738.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:39.258Z,1520564739.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:39.661Z,1520564739.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:40.052Z,1520564740.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:40.462Z,1520564740.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:40.850Z,1520564740.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:41.245Z,1520564741.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:41.650Z,1520564741.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:42.050Z,1520564742.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:42.453Z,1520564742.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:42.848Z,1520564742.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:43.250Z,1520564743.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:43.644Z,1520564743.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:44.048Z,1520564744.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:44.453Z,1520564744.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:44.850Z,1520564744.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:45.256Z,1520564745.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:45.657Z,1520564745.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:46.056Z,1520564746.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:46.452Z,1520564746.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:46.856Z,1520564746.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:47.255Z,1520564747.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:47.658Z,1520564747.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:48.050Z,1520564748.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:48.465Z,1520564748.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:48.859Z,1520564748.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:49.257Z,1520564749.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:49.653Z,1520564749.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:50.057Z,1520564750.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:50.461Z,1520564750.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:50.856Z,1520564750.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:51.259Z,1520564751.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:51.658Z,1520564751.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:52.048Z,1520564752.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:52.458Z,1520564752.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:52.857Z,1520564752.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:53.246Z,1520564753.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:53.648Z,1520564753.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:54.049Z,1520564754.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:54.450Z,1520564754.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:54.855Z,1520564754.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:55.241Z,1520564755.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:55.649Z,1520564755.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:56.047Z,1520564756.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:56.451Z,1520564756.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:56.847Z,1520564756.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:57.257Z,1520564757.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:57.642Z,1520564757.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:58.054Z,1520564758.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:58.458Z,1520564758.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:58.854Z,1520564758.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:59.246Z,1520564759.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:05:59.650Z,1520564759.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:00.062Z,1520564760.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:00.449Z,1520564760.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:00.851Z,1520564760.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:01.243Z,1520564761.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:01.653Z,1520564761.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:02.056Z,1520564762.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:02.454Z,1520564762.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:02.500Z,1520564762.500 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-09T03:06:02.500Z,1520564762.500 [Default:CheckIn:C.Wait] Stopped
2018-03-09T03:06:02.500Z,1520564762.500 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-09T03:06:02.500Z,1520564762.500 [Default:CheckIn:D] Running Loop=1
2018-03-09T03:06:02.851Z,1520564762.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:02.895Z,1520564762.895 [Default:CheckIn:D] Stopped
2018-03-09T03:06:02.895Z,1520564762.895 [Default:CheckIn:E] Running Loop=1
2018-03-09T03:06:03.257Z,1520564763.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:03.304Z,1520564763.304 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1160.301563 min 
2018-03-09T03:06:03.304Z,1520564763.304 [Default:CheckIn:E] Stopped
2018-03-09T03:06:03.305Z,1520564763.305 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-09T03:06:03.305Z,1520564763.305 [Default:CheckIn] Stopped
2018-03-09T03:06:03.305Z,1520564763.305 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-09T03:06:03.305Z,1520564763.305 [Default:CheckIn](INFO): Running loop #117
2018-03-09T03:06:03.305Z,1520564763.305 [Default:CheckIn] Running Loop=117
2018-03-09T03:06:03.305Z,1520564763.305 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-09T03:06:03.305Z,1520564763.305 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-09T03:06:06.538Z,1520564766.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:06.631Z,1520564766.631 [NAL9602](INFO): Powering up
2018-03-09T03:06:06.649Z,1520564766.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:07.013Z,1520564767.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:07.402Z,1520564767.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:07.814Z,1520564767.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:08.211Z,1520564768.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:08.618Z,1520564768.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:09.011Z,1520564769.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:09.412Z,1520564769.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:09.806Z,1520564769.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:10.210Z,1520564770.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:10.610Z,1520564770.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:11.006Z,1520564771.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:11.406Z,1520564771.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:11.810Z,1520564771.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:12.214Z,1520564772.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:12.606Z,1520564772.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:13.010Z,1520564773.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:13.406Z,1520564773.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:13.806Z,1520564773.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:14.220Z,1520564774.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:14.606Z,1520564774.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:15.006Z,1520564775.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:15.417Z,1520564775.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:15.805Z,1520564775.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:16.206Z,1520564776.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:16.610Z,1520564776.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:17.014Z,1520564777.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:17.420Z,1520564777.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:17.790Z,1520564777.790 [NAL9602](INFO): NAL9602 initialized
2018-03-09T03:06:17.819Z,1520564777.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:18.198Z,1520564778.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:18.582Z,1520564778.582 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-09T03:06:18.582Z,1520564778.582 [NAL9602] Data Fault, FailCount= 2
2018-03-09T03:06:18.582Z,1520564778.582 [NAL9602](ERROR): Data Fault
2018-03-09T03:06:18.599Z,1520564778.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:18.666Z,1520564778.666 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-09T03:06:18.986Z,1520564778.986 [NAL9602](INFO): Powering down
2018-03-09T03:06:19.004Z,1520564779.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:19.395Z,1520564779.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:19.802Z,1520564779.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:19.844Z,1520564779.844 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-09T03:06:19.844Z,1520564779.844 [NAL9602] No Fault, FailCount= 2
2018-03-09T03:06:20.222Z,1520564780.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:20.595Z,1520564780.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:21.023Z,1520564781.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:21.422Z,1520564781.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:21.800Z,1520564781.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:22.198Z,1520564782.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:22.602Z,1520564782.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:23.006Z,1520564783.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:23.406Z,1520564783.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:23.803Z,1520564783.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:24.200Z,1520564784.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:24.607Z,1520564784.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:25.006Z,1520564785.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:25.405Z,1520564785.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:25.819Z,1520564785.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:26.211Z,1520564786.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:26.610Z,1520564786.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:27.018Z,1520564787.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:27.413Z,1520564787.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:27.806Z,1520564787.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:28.226Z,1520564788.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:28.609Z,1520564788.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:29.014Z,1520564789.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:29.414Z,1520564789.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:29.810Z,1520564789.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:30.195Z,1520564790.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:30.615Z,1520564790.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:31.018Z,1520564791.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:31.399Z,1520564791.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:31.802Z,1520564791.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:31.838Z,1520564791.838 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T03:06:31.838Z,1520564791.838 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 47
2018-03-09T03:06:31.838Z,1520564791.838 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T03:06:31.851Z,1520564791.851 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T03:06:32.202Z,1520564792.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:32.252Z,1520564792.252 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T03:06:32.252Z,1520564792.252 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 47
2018-03-09T03:06:32.602Z,1520564792.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:32.647Z,1520564792.647 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T03:06:32.647Z,1520564792.647 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T03:06:32.647Z,1520564792.647 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T03:06:33.006Z,1520564793.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:33.414Z,1520564793.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:33.799Z,1520564793.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:34.243Z,1520564794.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:34.618Z,1520564794.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:35.007Z,1520564795.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:35.411Z,1520564795.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:35.818Z,1520564795.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:36.206Z,1520564796.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:36.610Z,1520564796.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:37.009Z,1520564797.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:37.409Z,1520564797.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:37.808Z,1520564797.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:38.209Z,1520564798.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:38.607Z,1520564798.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:39.015Z,1520564799.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:39.420Z,1520564799.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:39.798Z,1520564799.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:40.223Z,1520564800.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:40.622Z,1520564800.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:41.026Z,1520564801.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:41.402Z,1520564801.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:41.822Z,1520564801.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:42.203Z,1520564802.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:42.600Z,1520564802.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:43.023Z,1520564803.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:43.402Z,1520564803.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:43.800Z,1520564803.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:44.203Z,1520564804.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:44.598Z,1520564804.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:45.006Z,1520564805.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:45.406Z,1520564805.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:45.802Z,1520564805.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:46.197Z,1520564806.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:46.610Z,1520564806.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:47.003Z,1520564807.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:47.406Z,1520564807.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:47.814Z,1520564807.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:48.210Z,1520564808.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:48.609Z,1520564808.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:48.995Z,1520564808.995 [NAL9602](INFO): Powering up NAL9602
2018-03-09T03:06:49.012Z,1520564809.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:49.406Z,1520564809.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:49.807Z,1520564809.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:50.209Z,1520564810.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:50.610Z,1520564810.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:51.006Z,1520564811.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:51.414Z,1520564811.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:51.807Z,1520564811.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:52.203Z,1520564812.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:52.610Z,1520564812.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:53.010Z,1520564813.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:53.407Z,1520564813.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:53.820Z,1520564813.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:54.205Z,1520564814.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:54.595Z,1520564814.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:55.009Z,1520564815.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:55.411Z,1520564815.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:55.799Z,1520564815.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:56.221Z,1520564816.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:56.614Z,1520564816.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:57.014Z,1520564817.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:57.405Z,1520564817.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:57.810Z,1520564817.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:58.198Z,1520564818.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:58.607Z,1520564818.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:59.010Z,1520564819.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:59.396Z,1520564819.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:06:59.828Z,1520564819.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:00.186Z,1520564820.186 [NAL9602](INFO): NAL9602 initialized
2018-03-09T03:07:00.202Z,1520564820.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:00.602Z,1520564820.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:01.028Z,1520564821.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:01.425Z,1520564821.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:01.819Z,1520564821.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:02.202Z,1520564822.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:02.602Z,1520564822.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:03.007Z,1520564823.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:03.425Z,1520564823.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:06.609Z,1520564826.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:06.745Z,1520564826.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:07.091Z,1520564827.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:07.490Z,1520564827.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:07.891Z,1520564827.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:08.312Z,1520564828.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:08.713Z,1520564828.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:09.096Z,1520564829.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:09.500Z,1520564829.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:09.903Z,1520564829.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:10.294Z,1520564830.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:10.685Z,1520564830.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:11.092Z,1520564831.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:11.480Z,1520564831.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:11.895Z,1520564831.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:12.292Z,1520564832.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:12.680Z,1520564832.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:13.093Z,1520564833.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:13.506Z,1520564833.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:13.905Z,1520564833.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:14.301Z,1520564834.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:14.708Z,1520564834.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:15.095Z,1520564835.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:15.482Z,1520564835.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:15.882Z,1520564835.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:16.281Z,1520564836.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:16.682Z,1520564836.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:17.082Z,1520564837.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:17.480Z,1520564837.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:17.886Z,1520564837.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:18.279Z,1520564838.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:18.701Z,1520564838.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:19.108Z,1520564839.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:19.507Z,1520564839.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:19.906Z,1520564839.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:20.296Z,1520564840.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:20.687Z,1520564840.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:21.087Z,1520564841.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:21.498Z,1520564841.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:21.891Z,1520564841.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:22.295Z,1520564842.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:22.690Z,1520564842.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:23.092Z,1520564843.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:23.485Z,1520564843.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:23.897Z,1520564843.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:24.301Z,1520564844.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:24.698Z,1520564844.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:25.106Z,1520564845.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:25.482Z,1520564845.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:25.880Z,1520564845.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:26.282Z,1520564846.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:26.682Z,1520564846.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:27.082Z,1520564847.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:27.482Z,1520564847.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:27.904Z,1520564847.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:28.282Z,1520564848.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:28.682Z,1520564848.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:29.114Z,1520564849.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:29.502Z,1520564849.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:29.897Z,1520564849.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:30.303Z,1520564850.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:30.680Z,1520564850.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:31.087Z,1520564851.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:31.486Z,1520564851.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:31.880Z,1520564851.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:32.286Z,1520564852.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:32.685Z,1520564852.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:33.090Z,1520564853.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:33.487Z,1520564853.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:33.891Z,1520564853.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:34.297Z,1520564854.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:34.705Z,1520564854.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:35.097Z,1520564855.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:35.496Z,1520564855.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:35.890Z,1520564855.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:36.291Z,1520564856.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:36.687Z,1520564856.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:37.089Z,1520564857.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:37.489Z,1520564857.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:37.894Z,1520564857.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:38.285Z,1520564858.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:38.682Z,1520564858.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:39.082Z,1520564859.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:39.506Z,1520564859.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:39.906Z,1520564859.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:40.305Z,1520564860.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:40.701Z,1520564860.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:41.094Z,1520564861.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:41.483Z,1520564861.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:41.882Z,1520564861.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:42.282Z,1520564862.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:42.680Z,1520564862.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:43.082Z,1520564863.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:43.482Z,1520564863.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:43.886Z,1520564863.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:44.283Z,1520564864.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:44.706Z,1520564864.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:45.101Z,1520564865.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:45.501Z,1520564865.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:45.902Z,1520564865.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:46.287Z,1520564866.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:46.682Z,1520564866.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:47.082Z,1520564867.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:47.487Z,1520564867.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:47.890Z,1520564867.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:48.291Z,1520564868.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:48.687Z,1520564868.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:49.091Z,1520564869.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:49.491Z,1520564869.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:49.896Z,1520564869.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:50.296Z,1520564870.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:50.701Z,1520564870.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:51.102Z,1520564871.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:51.485Z,1520564871.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:51.891Z,1520564871.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:52.285Z,1520564872.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:52.689Z,1520564872.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:53.089Z,1520564873.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:53.480Z,1520564873.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:53.886Z,1520564873.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:54.282Z,1520564874.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:54.677Z,1520564874.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:55.109Z,1520564875.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:55.505Z,1520564875.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:55.897Z,1520564875.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:56.305Z,1520564876.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:56.691Z,1520564876.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:57.090Z,1520564877.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:57.490Z,1520564877.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:57.891Z,1520564877.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:58.290Z,1520564878.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:58.685Z,1520564878.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:59.083Z,1520564879.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:59.486Z,1520564879.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:07:59.882Z,1520564879.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:00.303Z,1520564880.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:00.710Z,1520564880.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:01.114Z,1520564881.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:01.503Z,1520564881.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:01.882Z,1520564881.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:02.294Z,1520564882.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:02.683Z,1520564882.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:03.091Z,1520564883.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:03.499Z,1520564883.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:06.674Z,1520564886.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:06.801Z,1520564886.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:07.193Z,1520564887.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:07.593Z,1520564887.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:07.983Z,1520564887.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:08.375Z,1520564888.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:08.780Z,1520564888.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:09.177Z,1520564889.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:09.587Z,1520564889.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:09.991Z,1520564889.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:10.367Z,1520564890.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:10.785Z,1520564890.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:11.191Z,1520564891.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:11.591Z,1520564891.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:11.981Z,1520564891.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:12.396Z,1520564892.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:12.793Z,1520564892.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:13.175Z,1520564893.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:13.577Z,1520564893.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:13.981Z,1520564893.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:14.378Z,1520564894.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:14.776Z,1520564894.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:15.183Z,1520564895.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:15.581Z,1520564895.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:15.980Z,1520564895.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:16.370Z,1520564896.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:16.801Z,1520564896.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:17.189Z,1520564897.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:17.582Z,1520564897.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:18.001Z,1520564898.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:18.378Z,1520564898.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:18.771Z,1520564898.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:19.182Z,1520564899.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:19.575Z,1520564899.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:19.969Z,1520564899.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:20.380Z,1520564900.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:20.775Z,1520564900.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:21.169Z,1520564901.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:21.590Z,1520564901.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:21.988Z,1520564901.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:22.402Z,1520564902.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:22.789Z,1520564902.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:23.189Z,1520564903.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:23.571Z,1520564903.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:23.987Z,1520564903.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:24.375Z,1520564904.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:24.775Z,1520564904.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:25.176Z,1520564905.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:25.583Z,1520564905.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:25.969Z,1520564905.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:26.373Z,1520564906.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:26.783Z,1520564906.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:27.192Z,1520564907.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:27.592Z,1520564907.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:27.994Z,1520564907.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:28.381Z,1520564908.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:28.778Z,1520564908.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:29.184Z,1520564909.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:29.566Z,1520564909.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:29.977Z,1520564909.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:30.370Z,1520564910.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:30.770Z,1520564910.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:31.171Z,1520564911.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:31.570Z,1520564911.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:31.974Z,1520564911.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:32.381Z,1520564912.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:32.781Z,1520564912.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:33.181Z,1520564913.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:33.600Z,1520564913.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:33.983Z,1520564913.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:34.371Z,1520564914.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:34.774Z,1520564914.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:35.178Z,1520564915.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:35.578Z,1520564915.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:35.988Z,1520564915.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:36.379Z,1520564916.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:36.776Z,1520564916.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:37.187Z,1520564917.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:37.593Z,1520564917.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:37.992Z,1520564917.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:38.381Z,1520564918.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:38.800Z,1520564918.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:39.175Z,1520564919.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:39.576Z,1520564919.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:39.978Z,1520564919.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:40.379Z,1520564920.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:40.778Z,1520564920.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:41.178Z,1520564921.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:41.578Z,1520564921.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:41.987Z,1520564921.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:42.383Z,1520564922.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:42.801Z,1520564922.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:43.185Z,1520564923.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:43.585Z,1520564923.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:43.989Z,1520564923.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:44.380Z,1520564924.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:44.775Z,1520564924.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:45.176Z,1520564925.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:45.584Z,1520564925.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:45.975Z,1520564925.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:46.383Z,1520564926.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:46.773Z,1520564926.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:47.183Z,1520564927.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:47.574Z,1520564927.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:47.980Z,1520564927.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:48.395Z,1520564928.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:48.792Z,1520564928.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:49.185Z,1520564929.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:49.580Z,1520564929.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:49.979Z,1520564929.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:50.385Z,1520564930.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:50.780Z,1520564930.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:51.168Z,1520564931.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:51.577Z,1520564931.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:51.981Z,1520564931.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:52.367Z,1520564932.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:52.773Z,1520564932.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:53.196Z,1520564933.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:53.585Z,1520564933.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:53.982Z,1520564933.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:54.381Z,1520564934.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:54.770Z,1520564934.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:55.171Z,1520564935.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:55.583Z,1520564935.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:55.970Z,1520564935.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:56.375Z,1520564936.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:56.779Z,1520564936.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:57.173Z,1520564937.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:57.586Z,1520564937.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:57.979Z,1520564937.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:58.379Z,1520564938.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:58.787Z,1520564938.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:59.189Z,1520564939.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:59.585Z,1520564939.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:08:59.991Z,1520564939.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:00.370Z,1520564940.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:00.768Z,1520564940.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:01.170Z,1520564941.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:01.570Z,1520564941.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:01.976Z,1520564941.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:02.386Z,1520564942.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:02.782Z,1520564942.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:03.174Z,1520564943.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:03.597Z,1520564943.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:06.818Z,1520564946.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:06.958Z,1520564946.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:07.324Z,1520564947.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:07.696Z,1520564947.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:08.129Z,1520564948.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:08.490Z,1520564948.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:08.935Z,1520564948.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:09.289Z,1520564949.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:09.726Z,1520564949.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:10.114Z,1520564950.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:10.492Z,1520564950.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:10.906Z,1520564950.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:11.319Z,1520564951.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:11.709Z,1520564951.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:12.110Z,1520564952.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:12.513Z,1520564952.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:12.907Z,1520564952.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:13.303Z,1520564953.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:13.691Z,1520564953.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:14.105Z,1520564954.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:14.492Z,1520564954.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:14.905Z,1520564954.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:15.289Z,1520564955.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:15.686Z,1520564955.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:16.084Z,1520564956.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:16.483Z,1520564956.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:16.937Z,1520564956.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:17.293Z,1520564957.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:17.708Z,1520564957.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:18.124Z,1520564958.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:18.526Z,1520564958.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:18.899Z,1520564958.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:19.325Z,1520564959.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:19.722Z,1520564959.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:20.103Z,1520564960.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:20.524Z,1520564960.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:20.907Z,1520564960.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:21.296Z,1520564961.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:21.691Z,1520564961.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:22.109Z,1520564962.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:22.509Z,1520564962.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:22.909Z,1520564962.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:23.300Z,1520564963.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:23.688Z,1520564963.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:24.114Z,1520564964.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:24.493Z,1520564964.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:24.907Z,1520564964.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:25.301Z,1520564965.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:25.710Z,1520564965.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:26.104Z,1520564966.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:26.521Z,1520564966.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:26.913Z,1520564966.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:27.293Z,1520564967.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:27.720Z,1520564967.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:28.116Z,1520564968.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:28.495Z,1520564968.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:28.898Z,1520564968.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:29.290Z,1520564969.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:29.689Z,1520564969.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:30.096Z,1520564970.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:30.498Z,1520564970.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:30.886Z,1520564970.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:31.294Z,1520564971.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:31.712Z,1520564971.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:32.094Z,1520564972.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:32.538Z,1520564972.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:32.938Z,1520564972.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:32.957Z,1520564972.957 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T03:09:32.957Z,1520564972.957 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 48
2018-03-09T03:09:32.957Z,1520564972.957 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T03:09:32.969Z,1520564972.969 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T03:09:33.304Z,1520564973.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:33.365Z,1520564973.365 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T03:09:33.365Z,1520564973.365 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 48
2018-03-09T03:09:33.733Z,1520564973.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:33.767Z,1520564973.767 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T03:09:33.767Z,1520564973.767 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T03:09:33.768Z,1520564973.768 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T03:09:34.121Z,1520564974.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:34.494Z,1520564974.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:34.917Z,1520564974.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:35.296Z,1520564975.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:35.696Z,1520564975.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:36.094Z,1520564976.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:36.501Z,1520564976.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:36.900Z,1520564976.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:37.300Z,1520564977.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:37.702Z,1520564977.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:38.103Z,1520564978.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:38.529Z,1520564978.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:38.911Z,1520564978.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:39.315Z,1520564979.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:39.690Z,1520564979.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:40.112Z,1520564980.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:40.501Z,1520564980.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:40.922Z,1520564980.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:41.325Z,1520564981.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:41.709Z,1520564981.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:42.113Z,1520564982.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:42.496Z,1520564982.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:42.915Z,1520564982.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:43.314Z,1520564983.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:43.714Z,1520564983.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:44.113Z,1520564984.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:44.500Z,1520564984.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:44.969Z,1520564984.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:45.285Z,1520564985.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:45.730Z,1520564985.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:46.084Z,1520564986.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:46.535Z,1520564986.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:46.922Z,1520564986.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:47.290Z,1520564987.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:47.702Z,1520564987.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:48.105Z,1520564988.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:48.497Z,1520564988.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:48.915Z,1520564988.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:49.297Z,1520564989.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:49.715Z,1520564989.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:50.108Z,1520564990.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:50.499Z,1520564990.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:50.902Z,1520564990.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:51.287Z,1520564991.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:51.712Z,1520564991.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:52.100Z,1520564992.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:52.485Z,1520564992.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:52.887Z,1520564992.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:53.306Z,1520564993.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:53.704Z,1520564993.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:54.108Z,1520564994.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:54.501Z,1520564994.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:54.903Z,1520564994.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:55.315Z,1520564995.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:55.725Z,1520564995.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:56.105Z,1520564996.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:56.525Z,1520564996.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:56.922Z,1520564996.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:57.297Z,1520564997.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:57.722Z,1520564997.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:58.102Z,1520564998.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:58.509Z,1520564998.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:58.909Z,1520564998.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:59.322Z,1520564999.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:09:59.697Z,1520564999.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:00.092Z,1520565000.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:00.492Z,1520565000.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:00.894Z,1520565000.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:01.328Z,1520565001.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:01.697Z,1520565001.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:02.119Z,1520565002.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:02.502Z,1520565002.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:02.905Z,1520565002.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:03.301Z,1520565003.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:03.729Z,1520565003.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:04.129Z,1520565004.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:07.276Z,1520565007.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:07.397Z,1520565007.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:07.778Z,1520565007.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:08.175Z,1520565008.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:08.585Z,1520565008.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:08.985Z,1520565008.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:09.385Z,1520565009.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:09.788Z,1520565009.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:10.189Z,1520565010.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:10.576Z,1520565010.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:10.978Z,1520565010.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:11.375Z,1520565011.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:11.775Z,1520565011.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:12.175Z,1520565012.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:12.583Z,1520565012.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:12.982Z,1520565012.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:13.375Z,1520565013.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:13.779Z,1520565013.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:14.193Z,1520565014.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:14.589Z,1520565014.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:14.995Z,1520565014.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:15.390Z,1520565015.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:15.770Z,1520565015.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:16.170Z,1520565016.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:16.570Z,1520565016.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:16.991Z,1520565016.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:17.391Z,1520565017.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:17.770Z,1520565017.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:18.170Z,1520565018.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:18.570Z,1520565018.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:18.971Z,1520565018.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:19.389Z,1520565019.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:19.790Z,1520565019.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:20.185Z,1520565020.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:20.593Z,1520565020.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:20.970Z,1520565020.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:21.373Z,1520565021.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:21.771Z,1520565021.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:22.171Z,1520565022.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:22.571Z,1520565022.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:22.971Z,1520565022.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:23.379Z,1520565023.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:23.771Z,1520565023.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:24.178Z,1520565024.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:24.597Z,1520565024.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:24.981Z,1520565024.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:25.382Z,1520565025.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:25.795Z,1520565025.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:26.183Z,1520565026.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:26.580Z,1520565026.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:26.977Z,1520565026.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:27.377Z,1520565027.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:27.775Z,1520565027.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:28.178Z,1520565028.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:28.584Z,1520565028.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:28.981Z,1520565028.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:29.394Z,1520565029.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:29.790Z,1520565029.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:30.191Z,1520565030.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:30.566Z,1520565030.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:30.970Z,1520565030.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:31.391Z,1520565031.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:31.766Z,1520565031.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:32.183Z,1520565032.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:32.589Z,1520565032.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:32.966Z,1520565032.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:33.371Z,1520565033.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:33.781Z,1520565033.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:34.185Z,1520565034.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:34.566Z,1520565034.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:34.970Z,1520565034.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:35.366Z,1520565035.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:35.770Z,1520565035.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:36.187Z,1520565036.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:36.570Z,1520565036.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:36.970Z,1520565036.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:37.370Z,1520565037.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:37.770Z,1520565037.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:38.171Z,1520565038.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:38.570Z,1520565038.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:38.971Z,1520565038.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:39.374Z,1520565039.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:39.770Z,1520565039.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:40.174Z,1520565040.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:40.574Z,1520565040.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:40.998Z,1520565040.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:41.381Z,1520565041.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:41.766Z,1520565041.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:42.174Z,1520565042.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:42.570Z,1520565042.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:42.979Z,1520565042.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:43.370Z,1520565043.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:43.771Z,1520565043.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:44.175Z,1520565044.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:44.578Z,1520565044.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:44.979Z,1520565044.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:45.381Z,1520565045.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:45.784Z,1520565045.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:46.183Z,1520565046.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:46.585Z,1520565046.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:46.978Z,1520565046.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:47.379Z,1520565047.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:47.777Z,1520565047.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:48.178Z,1520565048.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:48.579Z,1520565048.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:48.979Z,1520565048.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:49.379Z,1520565049.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:49.789Z,1520565049.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:50.189Z,1520565050.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:50.590Z,1520565050.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:50.993Z,1520565050.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:51.377Z,1520565051.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:51.777Z,1520565051.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:52.178Z,1520565052.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:52.591Z,1520565052.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:52.973Z,1520565052.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:53.377Z,1520565053.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:53.777Z,1520565053.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:54.173Z,1520565054.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:54.584Z,1520565054.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:54.994Z,1520565054.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:55.389Z,1520565055.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:55.790Z,1520565055.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:56.197Z,1520565056.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:56.581Z,1520565056.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:56.970Z,1520565056.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:57.370Z,1520565057.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:57.770Z,1520565057.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:58.170Z,1520565058.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:58.570Z,1520565058.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:58.971Z,1520565058.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:59.371Z,1520565059.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:10:59.771Z,1520565059.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:00.194Z,1520565060.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:00.591Z,1520565060.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:00.988Z,1520565060.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:01.391Z,1520565061.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:01.766Z,1520565061.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:02.170Z,1520565062.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:02.570Z,1520565062.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:02.970Z,1520565062.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:03.369Z,1520565063.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:03.399Z,1520565063.399 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-09T03:06:03.3Z
2018-03-09T03:11:03.399Z,1520565063.399 [Default:CheckIn:Read_GPS] Stopped
2018-03-09T03:11:03.399Z,1520565063.399 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-09T03:11:03.770Z,1520565063.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:07.121Z,1520565067.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:07.273Z,1520565067.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:07.589Z,1520565067.589 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0468.lzma
2018-03-09T03:11:07.629Z,1520565067.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:08.013Z,1520565068.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:08.388Z,1520565068.388 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0468.lzma.bak
2018-03-09T03:11:08.388Z,1520565068.388 [DataOverHttps](INFO): SBD MOMSN=7991730
2018-03-09T03:11:08.422Z,1520565068.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:09.037Z,1520565069.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:09.214Z,1520565069.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:12.577Z,1520565072.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:12.705Z,1520565072.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:13.098Z,1520565073.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:13.490Z,1520565073.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:13.872Z,1520565073.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:14.278Z,1520565074.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:14.678Z,1520565074.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:17.946Z,1520565077.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:18.094Z,1520565078.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:18.401Z,1520565078.401 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20180308T074127/Express0469.lzma
2018-03-09T03:11:18.450Z,1520565078.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:18.832Z,1520565078.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:19.200Z,1520565079.200 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0469.lzma.bak
2018-03-09T03:11:19.200Z,1520565079.200 [DataOverHttps](INFO): SBD MOMSN=7991732
2018-03-09T03:11:19.240Z,1520565079.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:19.842Z,1520565079.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:19.893Z,1520565079.893 [Default:CheckIn:Read_Iridium] Stopped
2018-03-09T03:11:19.893Z,1520565079.893 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-09T03:11:19.893Z,1520565079.893 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-09T03:11:20.024Z,1520565080.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:20.431Z,1520565080.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:23.613Z,1520565083.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:23.749Z,1520565083.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:24.142Z,1520565084.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:24.525Z,1520565084.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:24.903Z,1520565084.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:25.318Z,1520565085.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:25.723Z,1520565085.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:26.125Z,1520565086.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:26.512Z,1520565086.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:26.922Z,1520565086.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:27.308Z,1520565087.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:27.705Z,1520565087.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:28.094Z,1520565088.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:28.515Z,1520565088.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:28.925Z,1520565088.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:29.322Z,1520565089.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:29.713Z,1520565089.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:30.102Z,1520565090.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:30.544Z,1520565090.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:30.893Z,1520565090.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:31.336Z,1520565091.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:31.734Z,1520565091.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:32.126Z,1520565092.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:32.530Z,1520565092.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:32.935Z,1520565092.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:33.312Z,1520565093.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:33.737Z,1520565093.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:34.118Z,1520565094.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:34.522Z,1520565094.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:34.914Z,1520565094.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:35.320Z,1520565095.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:35.705Z,1520565095.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:36.099Z,1520565096.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:36.494Z,1520565096.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:36.896Z,1520565096.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:37.331Z,1520565097.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:37.695Z,1520565097.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:38.143Z,1520565098.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:38.526Z,1520565098.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:38.930Z,1520565098.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:39.333Z,1520565099.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:39.738Z,1520565099.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:40.145Z,1520565100.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:40.512Z,1520565100.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:40.923Z,1520565100.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:41.314Z,1520565101.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:41.704Z,1520565101.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:42.102Z,1520565102.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:42.507Z,1520565102.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:42.904Z,1520565102.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:43.315Z,1520565103.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:43.704Z,1520565103.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:44.117Z,1520565104.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:44.542Z,1520565104.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:44.920Z,1520565104.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:45.326Z,1520565105.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:45.710Z,1520565105.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:46.102Z,1520565106.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:46.512Z,1520565106.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:46.929Z,1520565106.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:47.326Z,1520565107.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:47.701Z,1520565107.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:48.126Z,1520565108.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:48.512Z,1520565108.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:48.905Z,1520565108.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:49.313Z,1520565109.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:49.717Z,1520565109.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:50.118Z,1520565110.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:50.521Z,1520565110.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:50.894Z,1520565110.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:51.294Z,1520565111.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:51.731Z,1520565111.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:52.107Z,1520565112.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:52.513Z,1520565112.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:52.907Z,1520565112.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:53.306Z,1520565113.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:53.704Z,1520565113.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:54.131Z,1520565114.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:54.549Z,1520565114.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:54.917Z,1520565114.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:55.337Z,1520565115.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:55.724Z,1520565115.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:56.106Z,1520565116.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:56.500Z,1520565116.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:56.907Z,1520565116.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:57.303Z,1520565117.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:57.709Z,1520565117.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:58.100Z,1520565118.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:58.496Z,1520565118.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:58.943Z,1520565118.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:59.308Z,1520565119.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:11:59.754Z,1520565119.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:00.133Z,1520565120.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:00.533Z,1520565120.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:00.944Z,1520565120.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:01.331Z,1520565121.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:01.716Z,1520565121.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:02.122Z,1520565122.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:02.519Z,1520565122.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:02.912Z,1520565122.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:03.292Z,1520565123.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:03.686Z,1520565123.686 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-09T03:12:03.709Z,1520565123.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:04.120Z,1520565124.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:04.496Z,1520565124.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:04.894Z,1520565124.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:05.294Z,1520565125.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:05.738Z,1520565125.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:06.098Z,1520565126.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:06.534Z,1520565126.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:06.923Z,1520565126.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:07.306Z,1520565127.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:07.718Z,1520565127.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:08.124Z,1520565128.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:08.522Z,1520565128.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:08.900Z,1520565128.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:09.315Z,1520565129.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:09.726Z,1520565129.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:09.765Z,1520565129.765 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-09T03:12:10.110Z,1520565130.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:10.513Z,1520565130.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:10.907Z,1520565130.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:11.311Z,1520565131.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:11.711Z,1520565131.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:12.115Z,1520565132.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:12.506Z,1520565132.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:12.902Z,1520565132.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:13.357Z,1520565133.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:13.711Z,1520565133.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:14.139Z,1520565134.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:14.518Z,1520565134.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:14.909Z,1520565134.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:15.320Z,1520565135.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:15.727Z,1520565135.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:16.133Z,1520565136.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:16.515Z,1520565136.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:16.926Z,1520565136.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:17.299Z,1520565137.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:17.701Z,1520565137.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:18.098Z,1520565138.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:18.503Z,1520565138.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:18.910Z,1520565138.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:19.303Z,1520565139.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:19.701Z,1520565139.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:20.107Z,1520565140.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:20.544Z,1520565140.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:23.818Z,1520565143.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:23.924Z,1520565143.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:24.309Z,1520565144.309 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-03-09T03:12:24.310Z,1520565144.310 [DropWeight] Hardware Fault, FailCount= 1
2018-03-09T03:12:24.310Z,1520565144.310 [DropWeight](ERROR): Hardware Fault
2018-03-09T03:12:24.326Z,1520565144.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:24.401Z,1520565144.401 [CBIT](INFO): Critical error at 20180309T031224
2018-03-09T03:12:24.403Z,1520565144.403 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-03-09T03:12:24.403Z,1520565144.403 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-03-09T03:12:24.719Z,1520565144.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:24.776Z,1520565144.776 [CBIT](INFO): Critical error at 20180309T031224
2018-03-09T03:12:25.118Z,1520565145.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:25.525Z,1520565145.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:25.919Z,1520565145.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:26.321Z,1520565146.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:26.723Z,1520565146.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:27.120Z,1520565147.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:27.522Z,1520565147.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:27.922Z,1520565147.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:28.332Z,1520565148.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:28.718Z,1520565148.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:29.120Z,1520565149.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:29.523Z,1520565149.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:29.920Z,1520565149.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:30.314Z,1520565150.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:30.734Z,1520565150.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:31.110Z,1520565151.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:31.514Z,1520565151.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:31.918Z,1520565151.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:32.314Z,1520565152.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:32.714Z,1520565152.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:33.114Z,1520565153.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:33.514Z,1520565153.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:33.914Z,1520565153.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:33.943Z,1520565153.943 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T03:12:33.943Z,1520565153.943 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 49
2018-03-09T03:12:33.943Z,1520565153.943 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T03:12:33.956Z,1520565153.956 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T03:12:34.298Z,1520565154.298 [NAL9602](INFO): Powering down
2018-03-09T03:12:34.317Z,1520565154.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:34.368Z,1520565154.368 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T03:12:34.368Z,1520565154.368 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 49
2018-03-09T03:12:34.714Z,1520565154.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:34.732Z,1520565154.732 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T03:12:34.749Z,1520565154.749 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T03:12:34.749Z,1520565154.749 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T03:12:35.121Z,1520565155.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:35.515Z,1520565155.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:35.919Z,1520565155.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:36.331Z,1520565156.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:36.713Z,1520565156.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:37.123Z,1520565157.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:37.520Z,1520565157.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:37.917Z,1520565157.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:38.317Z,1520565158.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:38.720Z,1520565158.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:39.123Z,1520565159.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:39.517Z,1520565159.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:39.922Z,1520565159.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:40.317Z,1520565160.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:40.717Z,1520565160.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:41.131Z,1520565161.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:41.518Z,1520565161.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:41.922Z,1520565161.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:42.331Z,1520565162.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:42.707Z,1520565162.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:43.113Z,1520565163.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:43.533Z,1520565163.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:43.911Z,1520565163.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:44.314Z,1520565164.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:44.714Z,1520565164.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:45.118Z,1520565165.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:45.518Z,1520565165.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:45.915Z,1520565165.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:46.318Z,1520565166.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:46.722Z,1520565166.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:47.117Z,1520565167.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:47.514Z,1520565167.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:47.922Z,1520565167.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:48.319Z,1520565168.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:48.720Z,1520565168.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:49.122Z,1520565169.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:49.521Z,1520565169.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:49.915Z,1520565169.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:50.321Z,1520565170.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:50.722Z,1520565170.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:51.117Z,1520565171.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:51.522Z,1520565171.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:51.921Z,1520565171.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:52.324Z,1520565172.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:52.724Z,1520565172.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:53.122Z,1520565173.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:53.519Z,1520565173.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:53.922Z,1520565173.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:54.321Z,1520565174.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:54.721Z,1520565174.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:55.124Z,1520565175.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:55.532Z,1520565175.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:55.907Z,1520565175.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:56.326Z,1520565176.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:56.730Z,1520565176.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:57.121Z,1520565177.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:57.526Z,1520565177.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:57.931Z,1520565177.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:58.325Z,1520565178.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:58.726Z,1520565178.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:59.117Z,1520565179.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:59.511Z,1520565179.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:12:59.917Z,1520565179.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:00.323Z,1520565180.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:00.711Z,1520565180.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:01.117Z,1520565181.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:01.533Z,1520565181.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:01.911Z,1520565181.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:02.324Z,1520565182.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:02.721Z,1520565182.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:03.126Z,1520565183.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:03.522Z,1520565183.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:03.933Z,1520565183.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:04.310Z,1520565184.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:04.726Z,1520565184.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:05.131Z,1520565185.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:05.511Z,1520565185.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:05.926Z,1520565185.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:06.319Z,1520565186.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:06.722Z,1520565186.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:07.128Z,1520565187.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:07.518Z,1520565187.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:07.910Z,1520565187.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:08.335Z,1520565188.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:08.714Z,1520565188.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:09.114Z,1520565189.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:09.519Z,1520565189.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:09.926Z,1520565189.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:10.325Z,1520565190.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:10.721Z,1520565190.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:11.120Z,1520565191.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:11.522Z,1520565191.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:11.918Z,1520565191.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:12.325Z,1520565192.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:12.719Z,1520565192.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:13.126Z,1520565193.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:13.526Z,1520565193.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:13.919Z,1520565193.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:14.325Z,1520565194.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:14.723Z,1520565194.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:15.122Z,1520565195.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:15.517Z,1520565195.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:15.931Z,1520565195.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:16.322Z,1520565196.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:16.707Z,1520565196.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:17.114Z,1520565197.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:17.514Z,1520565197.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:17.911Z,1520565197.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:18.334Z,1520565198.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:18.710Z,1520565198.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:19.118Z,1520565199.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:19.534Z,1520565199.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:19.909Z,1520565199.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:20.318Z,1520565200.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:20.714Z,1520565200.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:24.005Z,1520565204.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:24.126Z,1520565204.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:24.524Z,1520565204.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:24.925Z,1520565204.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:25.301Z,1520565205.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:25.721Z,1520565205.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:26.101Z,1520565206.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:26.502Z,1520565206.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:26.904Z,1520565206.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:27.304Z,1520565207.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:27.692Z,1520565207.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:28.104Z,1520565208.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:28.548Z,1520565208.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:28.900Z,1520565208.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:29.331Z,1520565209.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:29.727Z,1520565209.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:30.114Z,1520565210.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:30.519Z,1520565210.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:30.908Z,1520565210.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:31.320Z,1520565211.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:31.718Z,1520565211.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:32.121Z,1520565212.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:32.497Z,1520565212.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:32.902Z,1520565212.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:33.297Z,1520565213.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:33.699Z,1520565213.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:34.114Z,1520565214.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:34.497Z,1520565214.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:34.890Z,1520565214.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:35.298Z,1520565215.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:35.743Z,1520565215.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:36.094Z,1520565216.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:36.532Z,1520565216.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:36.928Z,1520565216.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:37.295Z,1520565217.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:37.714Z,1520565217.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:38.124Z,1520565218.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:38.518Z,1520565218.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:38.902Z,1520565218.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:39.307Z,1520565219.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:39.713Z,1520565219.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:40.107Z,1520565220.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:40.511Z,1520565220.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:40.898Z,1520565220.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:41.311Z,1520565221.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:41.713Z,1520565221.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:42.106Z,1520565222.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:42.507Z,1520565222.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:42.905Z,1520565222.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:43.327Z,1520565223.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:43.706Z,1520565223.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:44.152Z,1520565224.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:44.520Z,1520565224.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:44.918Z,1520565224.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:45.319Z,1520565225.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:45.718Z,1520565225.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:46.094Z,1520565226.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:46.521Z,1520565226.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:46.918Z,1520565226.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:47.312Z,1520565227.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:47.714Z,1520565227.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:48.110Z,1520565228.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:48.514Z,1520565228.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:48.914Z,1520565228.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:49.291Z,1520565229.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:49.702Z,1520565229.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:50.094Z,1520565230.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:50.534Z,1520565230.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:50.898Z,1520565230.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:51.347Z,1520565231.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:51.717Z,1520565231.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:52.098Z,1520565232.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:52.522Z,1520565232.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:52.927Z,1520565232.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:53.326Z,1520565233.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:53.697Z,1520565233.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:54.114Z,1520565234.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:54.527Z,1520565234.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:54.905Z,1520565234.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:55.296Z,1520565235.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:55.698Z,1520565235.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:56.105Z,1520565236.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:56.503Z,1520565236.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:56.898Z,1520565236.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:57.301Z,1520565237.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:57.700Z,1520565237.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:58.135Z,1520565238.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:58.503Z,1520565238.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:58.941Z,1520565238.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:59.309Z,1520565239.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:13:59.707Z,1520565239.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:00.118Z,1520565240.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:00.515Z,1520565240.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:00.906Z,1520565240.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:01.321Z,1520565241.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:01.715Z,1520565241.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:02.125Z,1520565242.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:02.511Z,1520565242.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:02.910Z,1520565242.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:03.298Z,1520565243.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:03.699Z,1520565243.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:04.110Z,1520565244.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:04.505Z,1520565244.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:04.894Z,1520565244.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:05.303Z,1520565245.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:05.747Z,1520565245.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:06.100Z,1520565246.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:06.531Z,1520565246.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:06.922Z,1520565246.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:07.311Z,1520565247.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:07.723Z,1520565247.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:08.118Z,1520565248.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:08.496Z,1520565248.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:08.916Z,1520565248.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:09.319Z,1520565249.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:09.698Z,1520565249.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:10.102Z,1520565250.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:10.501Z,1520565250.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:10.896Z,1520565250.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:11.314Z,1520565251.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:11.701Z,1520565251.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:12.098Z,1520565252.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:12.498Z,1520565252.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:12.935Z,1520565252.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:13.284Z,1520565253.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:13.730Z,1520565253.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:14.123Z,1520565254.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:14.497Z,1520565254.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:14.910Z,1520565254.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:15.333Z,1520565255.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:15.728Z,1520565255.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:16.110Z,1520565256.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:16.517Z,1520565256.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:16.906Z,1520565256.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:17.305Z,1520565257.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:17.702Z,1520565257.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:18.099Z,1520565258.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:18.509Z,1520565258.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:18.903Z,1520565258.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:19.297Z,1520565259.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:19.705Z,1520565259.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:20.147Z,1520565260.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:20.500Z,1520565260.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:20.946Z,1520565260.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:24.147Z,1520565264.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:24.257Z,1520565264.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:24.619Z,1520565264.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:25.020Z,1520565265.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:25.417Z,1520565265.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:25.818Z,1520565265.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:26.218Z,1520565266.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:26.614Z,1520565266.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:27.021Z,1520565267.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:27.417Z,1520565267.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:27.815Z,1520565267.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:28.217Z,1520565268.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:28.617Z,1520565268.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:29.020Z,1520565269.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:29.416Z,1520565269.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:29.823Z,1520565269.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:30.220Z,1520565270.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:30.617Z,1520565270.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:31.104Z,1520565271.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:31.415Z,1520565271.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:31.814Z,1520565271.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:32.217Z,1520565272.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:32.615Z,1520565272.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:33.026Z,1520565273.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:33.419Z,1520565273.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:33.815Z,1520565273.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:34.217Z,1520565274.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:34.621Z,1520565274.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:35.017Z,1520565275.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:35.417Z,1520565275.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:35.821Z,1520565275.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:36.217Z,1520565276.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:36.622Z,1520565276.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:37.017Z,1520565277.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:37.414Z,1520565277.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:37.817Z,1520565277.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:38.218Z,1520565278.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:38.610Z,1520565278.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:39.017Z,1520565279.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:39.422Z,1520565279.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:39.814Z,1520565279.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:40.217Z,1520565280.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:40.622Z,1520565280.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:41.018Z,1520565281.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:41.429Z,1520565281.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:41.818Z,1520565281.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:42.217Z,1520565282.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:42.617Z,1520565282.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:43.017Z,1520565283.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:43.418Z,1520565283.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:43.817Z,1520565283.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:44.218Z,1520565284.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:44.617Z,1520565284.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:45.017Z,1520565285.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:45.422Z,1520565285.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:45.817Z,1520565285.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:46.224Z,1520565286.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:46.622Z,1520565286.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:47.017Z,1520565287.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:47.417Z,1520565287.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:47.829Z,1520565287.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:48.223Z,1520565288.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:48.629Z,1520565288.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:49.022Z,1520565289.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:49.418Z,1520565289.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:49.823Z,1520565289.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:50.219Z,1520565290.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:50.606Z,1520565290.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:51.020Z,1520565291.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:51.407Z,1520565291.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:51.818Z,1520565291.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:52.219Z,1520565292.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:52.608Z,1520565292.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:53.007Z,1520565293.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:53.423Z,1520565293.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:53.807Z,1520565293.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:54.210Z,1520565294.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:54.632Z,1520565294.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:55.014Z,1520565295.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:55.410Z,1520565295.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:55.825Z,1520565295.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:56.214Z,1520565296.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:56.606Z,1520565296.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:57.026Z,1520565297.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:57.406Z,1520565297.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:57.815Z,1520565297.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:58.211Z,1520565298.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:58.607Z,1520565298.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:59.014Z,1520565299.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:59.410Z,1520565299.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:14:59.804Z,1520565299.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:00.213Z,1520565300.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:00.615Z,1520565300.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:01.014Z,1520565301.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:01.416Z,1520565301.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:01.815Z,1520565301.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:02.219Z,1520565302.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:02.618Z,1520565302.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:03.017Z,1520565303.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:03.416Z,1520565303.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:03.817Z,1520565303.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:04.219Z,1520565304.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:04.615Z,1520565304.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:05.013Z,1520565305.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:05.421Z,1520565305.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:05.815Z,1520565305.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:06.221Z,1520565306.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:06.620Z,1520565306.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:07.020Z,1520565307.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:07.421Z,1520565307.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:07.821Z,1520565307.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:08.217Z,1520565308.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:08.621Z,1520565308.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:09.017Z,1520565309.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:09.409Z,1520565309.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:09.817Z,1520565309.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:10.217Z,1520565310.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:10.613Z,1520565310.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:11.021Z,1520565311.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:11.417Z,1520565311.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:11.815Z,1520565311.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:12.218Z,1520565312.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:12.617Z,1520565312.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:13.017Z,1520565313.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:13.417Z,1520565313.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:13.817Z,1520565313.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:14.218Z,1520565314.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:14.616Z,1520565314.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:15.017Z,1520565315.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:15.415Z,1520565315.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:15.827Z,1520565315.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:16.218Z,1520565316.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:16.603Z,1520565316.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:17.013Z,1520565317.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:17.429Z,1520565317.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:17.807Z,1520565317.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:18.210Z,1520565318.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:18.610Z,1520565318.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:19.010Z,1520565319.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:19.414Z,1520565319.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:19.810Z,1520565319.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:20.213Z,1520565320.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:20.610Z,1520565320.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:21.018Z,1520565321.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:24.347Z,1520565324.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:24.461Z,1520565324.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:24.858Z,1520565324.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:25.252Z,1520565325.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:25.656Z,1520565325.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:26.058Z,1520565326.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:26.439Z,1520565326.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:26.849Z,1520565326.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:27.253Z,1520565327.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:27.635Z,1520565327.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:28.058Z,1520565328.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:28.453Z,1520565328.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:28.842Z,1520565328.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:29.246Z,1520565329.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:29.660Z,1520565329.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:30.045Z,1520565330.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:30.443Z,1520565330.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:30.845Z,1520565330.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:31.241Z,1520565331.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:31.650Z,1520565331.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:32.047Z,1520565332.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:32.446Z,1520565332.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:32.853Z,1520565332.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:33.257Z,1520565333.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:33.643Z,1520565333.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:34.054Z,1520565334.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:34.459Z,1520565334.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:34.835Z,1520565334.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:34.872Z,1520565334.872 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T03:15:34.872Z,1520565334.872 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 50
2018-03-09T03:15:34.872Z,1520565334.872 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T03:15:34.884Z,1520565334.884 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T03:15:35.242Z,1520565335.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:35.317Z,1520565335.317 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T03:15:35.317Z,1520565335.317 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 50
2018-03-09T03:15:35.642Z,1520565335.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:35.710Z,1520565335.710 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T03:15:35.711Z,1520565335.711 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T03:15:35.711Z,1520565335.711 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T03:15:36.042Z,1520565336.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:36.446Z,1520565336.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:36.842Z,1520565336.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:37.239Z,1520565337.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:37.651Z,1520565337.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:38.053Z,1520565338.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:38.446Z,1520565338.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:38.845Z,1520565338.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:39.258Z,1520565339.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:39.639Z,1520565339.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:40.054Z,1520565340.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:40.446Z,1520565340.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:40.838Z,1520565340.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:41.246Z,1520565341.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:41.642Z,1520565341.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:42.038Z,1520565342.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:42.447Z,1520565342.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:42.845Z,1520565342.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:43.238Z,1520565343.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:43.646Z,1520565343.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:44.042Z,1520565344.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:44.449Z,1520565344.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:44.847Z,1520565344.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:45.250Z,1520565345.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:45.645Z,1520565345.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:46.054Z,1520565346.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:46.442Z,1520565346.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:46.839Z,1520565346.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:47.257Z,1520565347.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:47.665Z,1520565347.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:48.038Z,1520565348.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:48.446Z,1520565348.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:48.842Z,1520565348.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:49.239Z,1520565349.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:49.646Z,1520565349.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:50.044Z,1520565350.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:50.442Z,1520565350.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:50.846Z,1520565350.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:51.243Z,1520565351.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:51.646Z,1520565351.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:52.048Z,1520565352.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:52.446Z,1520565352.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:52.848Z,1520565352.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:53.247Z,1520565353.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:53.650Z,1520565353.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:54.054Z,1520565354.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:54.442Z,1520565354.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:54.855Z,1520565354.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:55.257Z,1520565355.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:55.646Z,1520565355.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:56.048Z,1520565356.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:56.445Z,1520565356.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:56.845Z,1520565356.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:57.257Z,1520565357.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:57.646Z,1520565357.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:58.047Z,1520565358.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:58.446Z,1520565358.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:58.839Z,1520565358.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:59.239Z,1520565359.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:15:59.642Z,1520565359.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:00.038Z,1520565360.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:00.441Z,1520565360.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:00.846Z,1520565360.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:01.242Z,1520565361.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:01.645Z,1520565361.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:02.053Z,1520565362.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:02.452Z,1520565362.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:02.846Z,1520565362.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:03.250Z,1520565363.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:03.650Z,1520565363.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:04.049Z,1520565364.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:04.448Z,1520565364.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:04.841Z,1520565364.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:05.247Z,1520565365.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:05.642Z,1520565365.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:06.045Z,1520565366.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:06.442Z,1520565366.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:06.857Z,1520565366.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:07.246Z,1520565367.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:07.642Z,1520565367.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:08.050Z,1520565368.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:08.458Z,1520565368.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:08.839Z,1520565368.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:09.255Z,1520565369.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:09.638Z,1520565369.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:10.039Z,1520565370.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:10.446Z,1520565370.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:10.845Z,1520565370.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:11.246Z,1520565371.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:11.645Z,1520565371.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:12.050Z,1520565372.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:12.446Z,1520565372.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:12.842Z,1520565372.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:13.252Z,1520565373.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:13.642Z,1520565373.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:14.047Z,1520565374.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:14.451Z,1520565374.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:14.844Z,1520565374.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:15.254Z,1520565375.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:15.649Z,1520565375.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:16.051Z,1520565376.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:16.450Z,1520565376.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:16.849Z,1520565376.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:17.247Z,1520565377.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:17.655Z,1520565377.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:18.049Z,1520565378.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:18.445Z,1520565378.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:18.849Z,1520565378.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:19.252Z,1520565379.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:19.645Z,1520565379.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:20.062Z,1520565380.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:20.130Z,1520565380.130 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-09T03:16:20.130Z,1520565380.130 [Default:CheckIn:C.Wait] Stopped
2018-03-09T03:16:20.130Z,1520565380.130 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-09T03:16:20.130Z,1520565380.130 [Default:CheckIn:D] Running Loop=1
2018-03-09T03:16:20.446Z,1520565380.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:20.490Z,1520565380.490 [Default:CheckIn:D] Stopped
2018-03-09T03:16:20.490Z,1520565380.490 [Default:CheckIn:E] Running Loop=1
2018-03-09T03:16:20.840Z,1520565380.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:20.903Z,1520565380.903 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1170.594792 min 
2018-03-09T03:16:20.904Z,1520565380.904 [Default:CheckIn:E] Stopped
2018-03-09T03:16:20.904Z,1520565380.904 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-09T03:16:20.904Z,1520565380.904 [Default:CheckIn] Stopped
2018-03-09T03:16:20.904Z,1520565380.904 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-09T03:16:20.904Z,1520565380.904 [Default:CheckIn](INFO): Running loop #118
2018-03-09T03:16:20.904Z,1520565380.904 [Default:CheckIn] Running Loop=118
2018-03-09T03:16:20.904Z,1520565380.904 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-09T03:16:20.905Z,1520565380.905 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-09T03:16:21.244Z,1520565381.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:24.421Z,1520565384.421 [NAL9602](INFO): Powering up
2018-03-09T03:16:24.438Z,1520565384.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:24.573Z,1520565384.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:24.970Z,1520565384.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:25.354Z,1520565385.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:25.754Z,1520565385.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:26.155Z,1520565386.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:26.549Z,1520565386.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:26.950Z,1520565386.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:27.354Z,1520565387.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:27.754Z,1520565387.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:28.158Z,1520565388.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:28.554Z,1520565388.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:28.950Z,1520565388.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:29.347Z,1520565389.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:29.754Z,1520565389.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:30.157Z,1520565390.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:30.558Z,1520565390.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:30.962Z,1520565390.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:31.361Z,1520565391.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:31.758Z,1520565391.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:32.159Z,1520565392.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:32.557Z,1520565392.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:32.958Z,1520565392.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:33.362Z,1520565393.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:33.758Z,1520565393.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:34.158Z,1520565394.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:34.557Z,1520565394.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:34.970Z,1520565394.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:35.338Z,1520565395.338 [NAL9602](INFO): NAL9602 initialized
2018-03-09T03:16:35.355Z,1520565395.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:35.754Z,1520565395.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:36.161Z,1520565396.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:36.561Z,1520565396.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:36.965Z,1520565396.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:37.350Z,1520565397.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:37.755Z,1520565397.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:38.187Z,1520565398.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:38.554Z,1520565398.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:38.952Z,1520565398.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:39.354Z,1520565399.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:39.762Z,1520565399.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:40.163Z,1520565400.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:40.569Z,1520565400.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:40.959Z,1520565400.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:41.357Z,1520565401.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:41.761Z,1520565401.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:42.163Z,1520565402.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:42.559Z,1520565402.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:42.967Z,1520565402.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:43.363Z,1520565403.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:43.753Z,1520565403.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:44.162Z,1520565404.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:44.562Z,1520565404.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:44.957Z,1520565404.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:45.369Z,1520565405.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:45.750Z,1520565405.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:46.149Z,1520565406.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:46.562Z,1520565406.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:46.962Z,1520565406.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:47.350Z,1520565407.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:47.773Z,1520565407.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:48.163Z,1520565408.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:48.549Z,1520565408.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:48.974Z,1520565408.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:49.363Z,1520565409.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:49.752Z,1520565409.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:50.164Z,1520565410.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:50.550Z,1520565410.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:50.952Z,1520565410.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:51.366Z,1520565411.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:51.762Z,1520565411.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:52.149Z,1520565412.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:52.554Z,1520565412.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:52.954Z,1520565412.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:53.354Z,1520565413.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:53.754Z,1520565413.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:54.154Z,1520565414.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:54.552Z,1520565414.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:54.958Z,1520565414.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:55.354Z,1520565415.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:55.752Z,1520565415.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:56.161Z,1520565416.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:56.558Z,1520565416.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:56.952Z,1520565416.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:57.359Z,1520565417.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:57.758Z,1520565417.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:58.163Z,1520565418.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:58.561Z,1520565418.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:58.960Z,1520565418.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:59.349Z,1520565419.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:16:59.770Z,1520565419.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:00.163Z,1520565420.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:00.552Z,1520565420.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:00.961Z,1520565420.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:01.361Z,1520565421.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:01.752Z,1520565421.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:02.161Z,1520565422.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:02.561Z,1520565422.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:02.948Z,1520565422.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:03.373Z,1520565423.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:03.757Z,1520565423.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:04.152Z,1520565424.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:04.569Z,1520565424.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:04.954Z,1520565424.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:05.352Z,1520565425.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:05.754Z,1520565425.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:06.154Z,1520565426.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:06.555Z,1520565426.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:06.954Z,1520565426.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:07.338Z,1520565427.338 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-09T03:17:07.412Z,1520565427.412 [NAL9602](FAULT): received: 
+CSQ:0

OK12, 2, 0, 0, 0

OK
2018-03-09T03:17:07.413Z,1520565427.413 [NAL9602] Data Fault, FailCount= 3
2018-03-09T03:17:07.413Z,1520565427.413 [NAL9602](ERROR): Data Fault
2018-03-09T03:17:07.441Z,1520565427.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:07.498Z,1520565427.498 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-09T03:17:07.745Z,1520565427.745 [NAL9602](INFO): Powering down
2018-03-09T03:17:07.762Z,1520565427.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:08.166Z,1520565428.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:08.558Z,1520565428.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:08.619Z,1520565428.619 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-09T03:17:08.619Z,1520565428.619 [NAL9602] No Fault, FailCount= 3
2018-03-09T03:17:08.959Z,1520565428.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:09.373Z,1520565429.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:09.763Z,1520565429.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:10.161Z,1520565430.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:10.562Z,1520565430.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:10.960Z,1520565430.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:11.365Z,1520565431.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:11.765Z,1520565431.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:12.160Z,1520565432.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:12.566Z,1520565432.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:12.963Z,1520565432.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:13.359Z,1520565433.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:13.763Z,1520565433.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:14.164Z,1520565434.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:14.550Z,1520565434.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:14.950Z,1520565434.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:15.362Z,1520565435.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:15.749Z,1520565435.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:16.161Z,1520565436.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:16.566Z,1520565436.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:16.951Z,1520565436.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:17.362Z,1520565437.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:17.763Z,1520565437.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:18.166Z,1520565438.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:18.561Z,1520565438.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:18.971Z,1520565438.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:19.351Z,1520565439.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:19.750Z,1520565439.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:20.165Z,1520565440.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:20.561Z,1520565440.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:20.966Z,1520565440.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:21.362Z,1520565441.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:24.582Z,1520565444.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:24.693Z,1520565444.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:25.086Z,1520565445.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:25.479Z,1520565445.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:25.882Z,1520565445.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:26.289Z,1520565446.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:26.683Z,1520565446.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:27.082Z,1520565447.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:27.494Z,1520565447.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:27.883Z,1520565447.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:28.286Z,1520565448.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:28.686Z,1520565448.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:29.090Z,1520565449.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:29.486Z,1520565449.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:29.896Z,1520565449.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:30.289Z,1520565450.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:30.685Z,1520565450.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:31.086Z,1520565451.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:31.481Z,1520565451.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:31.889Z,1520565451.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:32.285Z,1520565452.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:32.685Z,1520565452.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:33.086Z,1520565453.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:33.485Z,1520565453.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:33.883Z,1520565453.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:34.285Z,1520565454.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:34.685Z,1520565454.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:35.085Z,1520565455.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:35.485Z,1520565455.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:35.885Z,1520565455.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:36.286Z,1520565456.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:36.685Z,1520565456.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:37.094Z,1520565457.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:37.481Z,1520565457.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:37.865Z,1520565457.865 [NAL9602](INFO): Powering up NAL9602
2018-03-09T03:17:37.895Z,1520565457.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:38.285Z,1520565458.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:38.681Z,1520565458.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:39.085Z,1520565459.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:39.485Z,1520565459.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:39.889Z,1520565459.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:40.289Z,1520565460.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:40.693Z,1520565460.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:41.085Z,1520565461.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:41.485Z,1520565461.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:41.885Z,1520565461.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:42.285Z,1520565462.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:42.682Z,1520565462.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:43.084Z,1520565463.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:43.481Z,1520565463.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:43.890Z,1520565463.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:44.294Z,1520565464.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:44.671Z,1520565464.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:45.082Z,1520565465.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:45.478Z,1520565465.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:45.875Z,1520565465.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:46.282Z,1520565466.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:46.678Z,1520565466.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:47.073Z,1520565467.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:47.483Z,1520565467.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:47.878Z,1520565467.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:48.282Z,1520565468.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:48.705Z,1520565468.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:49.078Z,1520565469.078 [NAL9602](INFO): NAL9602 initialized
2018-03-09T03:17:49.094Z,1520565469.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:49.478Z,1520565469.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:49.862Z,1520565469.862 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-09T03:17:49.862Z,1520565469.862 [NAL9602] Data Fault, FailCount= 4
2018-03-09T03:17:49.862Z,1520565469.862 [NAL9602](ERROR): Data Fault
2018-03-09T03:17:49.897Z,1520565469.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:49.952Z,1520565469.952 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-09T03:17:50.261Z,1520565470.261 [NAL9602](INFO): Powering down
2018-03-09T03:17:50.293Z,1520565470.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:50.673Z,1520565470.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:51.094Z,1520565471.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:51.124Z,1520565471.124 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-09T03:17:51.124Z,1520565471.124 [NAL9602] No Fault, FailCount= 4
2018-03-09T03:17:51.478Z,1520565471.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:51.889Z,1520565471.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:52.291Z,1520565472.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:52.678Z,1520565472.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:53.073Z,1520565473.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:53.490Z,1520565473.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:53.878Z,1520565473.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:54.273Z,1520565474.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:54.678Z,1520565474.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:55.078Z,1520565475.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:55.477Z,1520565475.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:55.878Z,1520565475.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:56.298Z,1520565476.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:56.673Z,1520565476.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:57.078Z,1520565477.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:57.478Z,1520565477.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:57.877Z,1520565477.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:58.278Z,1520565478.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:58.694Z,1520565478.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:59.079Z,1520565479.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:59.474Z,1520565479.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:17:59.879Z,1520565479.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:00.292Z,1520565480.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:00.675Z,1520565480.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:01.082Z,1520565481.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:01.477Z,1520565481.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:01.875Z,1520565481.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:02.278Z,1520565482.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:02.677Z,1520565482.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:03.078Z,1520565483.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:03.490Z,1520565483.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:03.878Z,1520565483.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:04.286Z,1520565484.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:04.690Z,1520565484.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:05.087Z,1520565485.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:05.483Z,1520565485.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:05.885Z,1520565485.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:06.289Z,1520565486.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:06.683Z,1520565486.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:07.081Z,1520565487.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:07.481Z,1520565487.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:07.882Z,1520565487.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:08.295Z,1520565488.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:08.686Z,1520565488.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:09.085Z,1520565489.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:09.493Z,1520565489.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:09.889Z,1520565489.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:10.274Z,1520565490.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:10.679Z,1520565490.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:11.073Z,1520565491.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:11.475Z,1520565491.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:11.878Z,1520565491.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:12.281Z,1520565492.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:12.675Z,1520565492.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:13.078Z,1520565493.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:13.481Z,1520565493.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:13.875Z,1520565493.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:14.286Z,1520565494.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:14.685Z,1520565494.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:15.082Z,1520565495.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:15.483Z,1520565495.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:15.884Z,1520565495.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:16.283Z,1520565496.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:16.683Z,1520565496.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:17.086Z,1520565497.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:17.482Z,1520565497.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:17.884Z,1520565497.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:18.285Z,1520565498.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:18.683Z,1520565498.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:19.082Z,1520565499.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:19.488Z,1520565499.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:19.882Z,1520565499.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:20.281Z,1520565500.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:20.665Z,1520565500.665 [NAL9602](INFO): Powering up NAL9602
2018-03-09T03:18:20.693Z,1520565500.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:21.085Z,1520565501.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:21.486Z,1520565501.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:24.765Z,1520565504.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:24.917Z,1520565504.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:25.247Z,1520565505.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:25.640Z,1520565505.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:26.053Z,1520565506.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:26.450Z,1520565506.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:26.850Z,1520565506.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:27.234Z,1520565507.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:27.642Z,1520565507.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:28.045Z,1520565508.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:28.435Z,1520565508.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:28.858Z,1520565508.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:29.234Z,1520565509.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:29.634Z,1520565509.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:30.038Z,1520565510.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:30.434Z,1520565510.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:30.834Z,1520565510.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:31.257Z,1520565511.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:31.622Z,1520565511.622 [NAL9602](INFO): NAL9602 initialized
2018-03-09T03:18:31.639Z,1520565511.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:32.038Z,1520565512.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:32.468Z,1520565512.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:32.857Z,1520565512.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:33.257Z,1520565513.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:33.646Z,1520565513.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:34.046Z,1520565514.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:34.457Z,1520565514.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:34.857Z,1520565514.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:35.260Z,1520565515.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:35.637Z,1520565515.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:36.042Z,1520565516.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:36.140Z,1520565516.140 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T03:18:36.141Z,1520565516.141 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 51
2018-03-09T03:18:36.141Z,1520565516.141 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T03:18:36.163Z,1520565516.163 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T03:18:36.438Z,1520565516.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:36.491Z,1520565516.491 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T03:18:36.491Z,1520565516.491 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 51
2018-03-09T03:18:36.841Z,1520565516.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:36.864Z,1520565516.864 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T03:18:36.865Z,1520565516.865 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T03:18:36.865Z,1520565516.865 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T03:18:37.263Z,1520565517.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:37.633Z,1520565517.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:38.034Z,1520565518.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:38.442Z,1520565518.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:38.833Z,1520565518.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:39.244Z,1520565519.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:39.659Z,1520565519.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:40.045Z,1520565520.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:40.463Z,1520565520.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:40.838Z,1520565520.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:41.242Z,1520565521.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:41.638Z,1520565521.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:42.040Z,1520565522.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:42.437Z,1520565522.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:42.842Z,1520565522.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:43.249Z,1520565523.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:43.639Z,1520565523.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:44.046Z,1520565524.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:44.459Z,1520565524.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:44.857Z,1520565524.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:45.267Z,1520565525.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:45.658Z,1520565525.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:46.033Z,1520565526.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:46.442Z,1520565526.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:46.845Z,1520565526.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:47.243Z,1520565527.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:47.642Z,1520565527.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:48.046Z,1520565528.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:48.449Z,1520565528.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:48.847Z,1520565528.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:49.244Z,1520565529.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:49.653Z,1520565529.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:50.057Z,1520565530.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:50.458Z,1520565530.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:50.850Z,1520565530.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:51.238Z,1520565531.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:51.644Z,1520565531.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:52.045Z,1520565532.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:52.448Z,1520565532.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:52.853Z,1520565532.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:53.246Z,1520565533.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:53.648Z,1520565533.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:54.045Z,1520565534.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:54.454Z,1520565534.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:54.863Z,1520565534.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:55.263Z,1520565535.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:55.653Z,1520565535.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:56.052Z,1520565536.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:56.439Z,1520565536.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:56.843Z,1520565536.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:57.238Z,1520565537.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:57.646Z,1520565537.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:58.046Z,1520565538.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:58.441Z,1520565538.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:58.847Z,1520565538.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:59.252Z,1520565539.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:18:59.639Z,1520565539.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:00.049Z,1520565540.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:00.462Z,1520565540.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:00.867Z,1520565540.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:01.256Z,1520565541.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:01.645Z,1520565541.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:02.042Z,1520565542.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:02.441Z,1520565542.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:02.843Z,1520565542.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:03.246Z,1520565543.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:03.651Z,1520565543.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:04.046Z,1520565544.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:04.448Z,1520565544.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:04.846Z,1520565544.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:05.253Z,1520565545.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:05.660Z,1520565545.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:06.057Z,1520565546.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:06.455Z,1520565546.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:06.838Z,1520565546.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:07.238Z,1520565547.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:07.633Z,1520565547.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:08.042Z,1520565548.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:08.439Z,1520565548.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:08.842Z,1520565548.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:09.234Z,1520565549.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:09.638Z,1520565549.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:10.036Z,1520565550.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:10.463Z,1520565550.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:10.857Z,1520565550.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:11.258Z,1520565551.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:11.645Z,1520565551.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:12.038Z,1520565552.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:12.449Z,1520565552.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:12.846Z,1520565552.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:13.244Z,1520565553.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:13.646Z,1520565553.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:14.048Z,1520565554.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:14.446Z,1520565554.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:14.844Z,1520565554.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:15.234Z,1520565555.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:15.665Z,1520565555.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:16.061Z,1520565556.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:16.463Z,1520565556.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:16.856Z,1520565556.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:17.242Z,1520565557.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:17.642Z,1520565557.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:18.043Z,1520565558.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:18.438Z,1520565558.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:18.838Z,1520565558.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:19.242Z,1520565559.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:19.642Z,1520565559.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:20.043Z,1520565560.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:20.439Z,1520565560.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:20.857Z,1520565560.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:21.266Z,1520565561.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:21.664Z,1520565561.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:24.981Z,1520565564.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:25.096Z,1520565565.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:25.458Z,1520565565.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:25.865Z,1520565565.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:26.265Z,1520565566.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:26.665Z,1520565566.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:27.065Z,1520565567.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:27.447Z,1520565567.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:27.851Z,1520565567.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:28.254Z,1520565568.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:28.653Z,1520565568.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:29.054Z,1520565569.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:29.454Z,1520565569.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:29.855Z,1520565569.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:30.265Z,1520565570.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:30.684Z,1520565570.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:31.062Z,1520565571.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:31.466Z,1520565571.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:31.865Z,1520565571.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:32.266Z,1520565572.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:32.648Z,1520565572.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:33.048Z,1520565573.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:33.448Z,1520565573.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:33.849Z,1520565573.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:34.246Z,1520565574.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:34.644Z,1520565574.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:35.046Z,1520565575.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:35.458Z,1520565575.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:35.844Z,1520565575.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:36.257Z,1520565576.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:36.664Z,1520565576.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:37.059Z,1520565577.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:37.468Z,1520565577.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:37.853Z,1520565577.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:38.250Z,1520565578.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:38.646Z,1520565578.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:39.050Z,1520565579.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:39.441Z,1520565579.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:39.850Z,1520565579.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:40.247Z,1520565580.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:40.650Z,1520565580.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:41.046Z,1520565581.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:41.457Z,1520565581.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:41.869Z,1520565581.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:42.258Z,1520565582.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:42.657Z,1520565582.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:43.054Z,1520565583.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:43.452Z,1520565583.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:43.852Z,1520565583.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:44.254Z,1520565584.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:44.661Z,1520565584.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:45.054Z,1520565585.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:45.452Z,1520565585.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:45.858Z,1520565585.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:46.255Z,1520565586.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:46.665Z,1520565586.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:47.069Z,1520565587.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:47.466Z,1520565587.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:47.857Z,1520565587.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:48.247Z,1520565588.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:48.647Z,1520565588.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:49.046Z,1520565589.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:49.467Z,1520565589.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:49.846Z,1520565589.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:50.241Z,1520565590.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:50.646Z,1520565590.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:51.046Z,1520565591.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:51.445Z,1520565591.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:51.865Z,1520565591.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:52.257Z,1520565592.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:52.665Z,1520565592.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:53.065Z,1520565593.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:53.454Z,1520565593.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:53.855Z,1520565593.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:54.251Z,1520565594.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:54.655Z,1520565594.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:55.055Z,1520565595.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:55.452Z,1520565595.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:55.855Z,1520565595.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:56.254Z,1520565596.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:56.660Z,1520565596.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:57.065Z,1520565597.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:57.465Z,1520565597.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:57.863Z,1520565597.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:58.269Z,1520565598.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:58.659Z,1520565598.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:59.046Z,1520565599.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:59.449Z,1520565599.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:19:59.850Z,1520565599.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:00.246Z,1520565600.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:00.642Z,1520565600.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:01.050Z,1520565601.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:01.446Z,1520565601.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:01.846Z,1520565601.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:02.261Z,1520565602.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:02.665Z,1520565602.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:03.053Z,1520565603.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:03.463Z,1520565603.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:03.865Z,1520565603.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:04.242Z,1520565604.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:04.650Z,1520565604.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:05.066Z,1520565605.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:05.447Z,1520565605.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:05.850Z,1520565605.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:06.246Z,1520565606.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:06.642Z,1520565606.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:07.050Z,1520565607.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:07.465Z,1520565607.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:07.865Z,1520565607.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:08.264Z,1520565608.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:08.665Z,1520565608.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:09.046Z,1520565609.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:09.446Z,1520565609.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:09.846Z,1520565609.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:10.247Z,1520565610.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:10.646Z,1520565610.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:11.046Z,1520565611.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:11.446Z,1520565611.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:11.848Z,1520565611.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:12.252Z,1520565612.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:12.665Z,1520565612.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:13.065Z,1520565613.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:13.465Z,1520565613.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:13.865Z,1520565613.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:14.254Z,1520565614.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:14.651Z,1520565614.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:15.054Z,1520565615.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:15.455Z,1520565615.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:15.852Z,1520565615.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:16.254Z,1520565616.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:16.654Z,1520565616.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:17.053Z,1520565617.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:17.454Z,1520565617.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:17.860Z,1520565617.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:18.259Z,1520565618.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:18.665Z,1520565618.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:19.062Z,1520565619.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:19.449Z,1520565619.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:19.859Z,1520565619.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:20.257Z,1520565620.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:20.646Z,1520565620.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:21.050Z,1520565621.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:21.450Z,1520565621.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:21.847Z,1520565621.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:26.537Z,1520565626.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:26.657Z,1520565626.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:27.044Z,1520565627.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:27.449Z,1520565627.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:27.842Z,1520565627.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:28.226Z,1520565628.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:28.626Z,1520565628.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:29.025Z,1520565629.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:29.426Z,1520565629.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:29.826Z,1520565629.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:30.226Z,1520565630.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:30.626Z,1520565630.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:31.026Z,1520565631.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:31.445Z,1520565631.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:31.845Z,1520565631.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:32.243Z,1520565632.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:32.646Z,1520565632.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:33.026Z,1520565633.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:33.422Z,1520565633.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:33.837Z,1520565633.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:34.226Z,1520565634.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:34.629Z,1520565634.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:35.030Z,1520565635.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:35.426Z,1520565635.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:35.826Z,1520565635.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:36.234Z,1520565636.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:36.637Z,1520565636.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:37.041Z,1520565637.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:37.441Z,1520565637.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:37.837Z,1520565637.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:38.230Z,1520565638.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:38.634Z,1520565638.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:39.032Z,1520565639.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:39.430Z,1520565639.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:39.835Z,1520565639.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:40.228Z,1520565640.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:40.630Z,1520565640.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:41.038Z,1520565641.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:41.434Z,1520565641.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:41.845Z,1520565641.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:42.243Z,1520565642.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:42.645Z,1520565642.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:43.041Z,1520565643.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:43.445Z,1520565643.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:43.846Z,1520565643.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:44.222Z,1520565644.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:44.645Z,1520565644.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:45.045Z,1520565645.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:45.435Z,1520565645.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:45.834Z,1520565645.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:46.245Z,1520565646.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:46.635Z,1520565646.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:47.045Z,1520565647.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:47.448Z,1520565647.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:47.842Z,1520565647.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:48.245Z,1520565648.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:48.641Z,1520565648.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:49.022Z,1520565649.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:49.446Z,1520565649.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:49.826Z,1520565649.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:50.226Z,1520565650.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:50.627Z,1520565650.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:51.026Z,1520565651.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:51.426Z,1520565651.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:51.826Z,1520565651.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:52.244Z,1520565652.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:52.646Z,1520565652.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:53.045Z,1520565653.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:53.449Z,1520565653.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:53.822Z,1520565653.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:54.230Z,1520565654.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:54.626Z,1520565654.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:55.026Z,1520565655.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:55.431Z,1520565655.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:55.826Z,1520565655.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:56.226Z,1520565656.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:56.630Z,1520565656.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:57.025Z,1520565657.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:57.446Z,1520565657.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:57.849Z,1520565657.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:58.245Z,1520565658.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:58.657Z,1520565658.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:59.026Z,1520565659.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:59.426Z,1520565659.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:20:59.827Z,1520565659.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:00.224Z,1520565660.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:00.631Z,1520565660.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:01.030Z,1520565661.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:01.427Z,1520565661.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:01.833Z,1520565661.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:02.236Z,1520565662.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:02.636Z,1520565662.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:03.058Z,1520565663.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:03.440Z,1520565663.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:03.843Z,1520565663.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:04.230Z,1520565664.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:04.634Z,1520565664.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:05.034Z,1520565665.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:05.432Z,1520565665.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:05.837Z,1520565665.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:06.229Z,1520565666.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:06.629Z,1520565666.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:07.035Z,1520565667.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:07.425Z,1520565667.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:07.845Z,1520565667.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:08.241Z,1520565668.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:08.637Z,1520565668.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:09.046Z,1520565669.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:09.426Z,1520565669.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:09.827Z,1520565669.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:10.226Z,1520565670.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:10.626Z,1520565670.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:11.038Z,1520565671.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:11.426Z,1520565671.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:11.827Z,1520565671.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:12.222Z,1520565672.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:12.645Z,1520565672.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:13.053Z,1520565673.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:13.445Z,1520565673.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:13.849Z,1520565673.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:14.242Z,1520565674.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:14.624Z,1520565674.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:15.030Z,1520565675.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:15.422Z,1520565675.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:15.824Z,1520565675.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:16.226Z,1520565676.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:16.630Z,1520565676.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:17.030Z,1520565677.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:17.446Z,1520565677.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:17.846Z,1520565677.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:18.249Z,1520565678.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:18.656Z,1520565678.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:19.057Z,1520565679.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:19.445Z,1520565679.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:19.846Z,1520565679.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:20.246Z,1520565680.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:20.624Z,1520565680.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:21.026Z,1520565681.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:21.064Z,1520565681.064 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-09T03:16:20.9Z
2018-03-09T03:21:21.064Z,1520565681.064 [Default:CheckIn:Read_GPS] Stopped
2018-03-09T03:21:21.064Z,1520565681.064 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-09T03:21:21.431Z,1520565681.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:21.922Z,1520565681.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:22.238Z,1520565682.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:25.708Z,1520565685.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:25.809Z,1520565685.809 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20180308T074127/Courier0472.lzma
2018-03-09T03:21:25.841Z,1520565685.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:26.193Z,1520565686.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:30.496Z,1520565690.496 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0472.lzma.bak
2018-03-09T03:21:30.496Z,1520565690.496 [DataOverHttps](INFO): SBD MOMSN=7991801
2018-03-09T03:21:30.530Z,1520565690.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:31.007Z,1520565691.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:31.137Z,1520565691.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:31.479Z,1520565691.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:34.689Z,1520565694.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:34.805Z,1520565694.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:35.200Z,1520565695.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:35.605Z,1520565695.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:36.001Z,1520565696.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:36.405Z,1520565696.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:36.795Z,1520565696.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:40.155Z,1520565700.155 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-09T03:21:40.182Z,1520565700.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:40.201Z,1520565700.201 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T03:21:40.201Z,1520565700.201 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 52
2018-03-09T03:21:40.201Z,1520565700.201 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T03:21:40.237Z,1520565700.237 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T03:21:40.306Z,1520565700.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:40.351Z,1520565700.351 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T03:21:40.351Z,1520565700.351 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 52
2018-03-09T03:21:40.653Z,1520565700.653 [DataOverHttps](INFO): Sending 255 bytes from file Logs/20180308T074127/Express0473.lzma
2018-03-09T03:21:40.688Z,1520565700.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:40.706Z,1520565700.706 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T03:21:40.706Z,1520565700.706 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T03:21:40.707Z,1520565700.707 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T03:21:41.066Z,1520565701.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:41.452Z,1520565701.452 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0473.lzma.bak
2018-03-09T03:21:41.452Z,1520565701.452 [DataOverHttps](INFO): SBD MOMSN=7991805
2018-03-09T03:21:41.494Z,1520565701.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:42.083Z,1520565702.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:42.103Z,1520565702.103 [Default:CheckIn:Read_Iridium] Stopped
2018-03-09T03:21:42.104Z,1520565702.104 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-09T03:21:42.104Z,1520565702.104 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-09T03:21:42.271Z,1520565702.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:45.544Z,1520565705.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:45.659Z,1520565705.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:46.059Z,1520565706.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:46.441Z,1520565706.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:46.846Z,1520565706.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:47.241Z,1520565707.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:47.638Z,1520565707.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:48.034Z,1520565708.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:48.438Z,1520565708.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:48.842Z,1520565708.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:49.245Z,1520565709.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:49.645Z,1520565709.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:50.039Z,1520565710.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:50.443Z,1520565710.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:50.856Z,1520565710.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:51.250Z,1520565711.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:51.641Z,1520565711.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:52.045Z,1520565712.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:52.446Z,1520565712.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:52.834Z,1520565712.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:53.345Z,1520565713.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:53.640Z,1520565713.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:54.058Z,1520565714.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:54.439Z,1520565714.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:54.881Z,1520565714.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:55.256Z,1520565715.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:55.650Z,1520565715.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:56.043Z,1520565716.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:56.443Z,1520565716.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:56.845Z,1520565716.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:57.249Z,1520565717.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:57.646Z,1520565717.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:58.044Z,1520565718.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:58.439Z,1520565718.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:58.845Z,1520565718.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:59.234Z,1520565719.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:21:59.638Z,1520565719.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:00.038Z,1520565720.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:00.448Z,1520565720.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:00.839Z,1520565720.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:01.246Z,1520565721.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:01.642Z,1520565721.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:02.048Z,1520565722.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:02.441Z,1520565722.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:02.846Z,1520565722.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:03.235Z,1520565723.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:03.643Z,1520565723.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:04.038Z,1520565724.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:04.442Z,1520565724.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:04.838Z,1520565724.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:05.243Z,1520565725.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:05.636Z,1520565725.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:06.138Z,1520565726.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:06.435Z,1520565726.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:06.852Z,1520565726.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:07.235Z,1520565727.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:07.636Z,1520565727.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:08.047Z,1520565728.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:08.444Z,1520565728.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:08.842Z,1520565728.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:09.243Z,1520565729.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:09.662Z,1520565729.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:10.045Z,1520565730.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:10.102Z,1520565730.102 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-09T03:22:10.422Z,1520565730.422 [NAL9602](INFO): Powering down
2018-03-09T03:22:10.463Z,1520565730.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:10.850Z,1520565730.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:11.249Z,1520565731.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:11.649Z,1520565731.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:12.045Z,1520565732.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:12.450Z,1520565732.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:12.845Z,1520565732.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:13.238Z,1520565733.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:13.635Z,1520565733.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:14.037Z,1520565734.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:14.438Z,1520565734.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:14.835Z,1520565734.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:15.238Z,1520565735.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:15.644Z,1520565735.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:16.042Z,1520565736.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:16.449Z,1520565736.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:16.849Z,1520565736.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:17.235Z,1520565737.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:17.638Z,1520565737.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:18.038Z,1520565738.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:18.449Z,1520565738.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:18.838Z,1520565738.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:19.238Z,1520565739.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:19.635Z,1520565739.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:20.038Z,1520565740.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:20.438Z,1520565740.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:20.835Z,1520565740.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:21.237Z,1520565741.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:21.638Z,1520565741.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:22.039Z,1520565742.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:22.442Z,1520565742.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:22.849Z,1520565742.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:23.238Z,1520565743.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:23.646Z,1520565743.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:24.050Z,1520565744.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:24.453Z,1520565744.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:24.850Z,1520565744.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:25.250Z,1520565745.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:25.635Z,1520565745.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:26.042Z,1520565746.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:26.438Z,1520565746.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:26.836Z,1520565746.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:27.242Z,1520565747.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:27.638Z,1520565747.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:28.034Z,1520565748.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:28.437Z,1520565748.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:28.841Z,1520565748.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:29.254Z,1520565749.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:29.650Z,1520565749.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:30.050Z,1520565750.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:30.438Z,1520565750.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:30.843Z,1520565750.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:31.238Z,1520565751.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:31.638Z,1520565751.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:32.038Z,1520565752.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:32.449Z,1520565752.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:32.843Z,1520565752.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:33.245Z,1520565753.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:33.646Z,1520565753.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:34.050Z,1520565754.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:34.446Z,1520565754.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:34.844Z,1520565754.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:35.249Z,1520565755.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:35.651Z,1520565755.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:36.032Z,1520565756.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:36.447Z,1520565756.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:36.847Z,1520565756.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:37.246Z,1520565757.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:37.650Z,1520565757.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:38.039Z,1520565758.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:38.439Z,1520565758.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:38.838Z,1520565758.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:39.238Z,1520565759.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:39.635Z,1520565759.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:40.034Z,1520565760.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:40.438Z,1520565760.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:40.838Z,1520565760.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:41.238Z,1520565761.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:41.645Z,1520565761.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:42.045Z,1520565762.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:42.446Z,1520565762.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:42.846Z,1520565762.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:46.170Z,1520565766.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:46.289Z,1520565766.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:46.662Z,1520565766.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:47.063Z,1520565767.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:47.461Z,1520565767.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:47.860Z,1520565767.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:48.260Z,1520565768.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:48.665Z,1520565768.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:49.064Z,1520565769.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:49.460Z,1520565769.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:49.861Z,1520565769.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:50.261Z,1520565770.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:50.671Z,1520565770.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:51.050Z,1520565771.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:51.465Z,1520565771.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:51.854Z,1520565771.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:52.254Z,1520565772.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:52.665Z,1520565772.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:53.065Z,1520565773.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:53.450Z,1520565773.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:53.867Z,1520565773.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:54.266Z,1520565774.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:54.650Z,1520565774.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:55.053Z,1520565775.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:55.451Z,1520565775.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:55.859Z,1520565775.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:56.255Z,1520565776.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:56.654Z,1520565776.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:57.050Z,1520565777.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:57.453Z,1520565777.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:57.851Z,1520565777.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:58.258Z,1520565778.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:58.653Z,1520565778.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:59.054Z,1520565779.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:59.454Z,1520565779.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:22:59.869Z,1520565779.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:00.257Z,1520565780.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:00.662Z,1520565780.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:01.058Z,1520565781.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:01.458Z,1520565781.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:01.858Z,1520565781.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:02.260Z,1520565782.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:02.659Z,1520565782.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:03.061Z,1520565783.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:03.462Z,1520565783.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:03.859Z,1520565783.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:04.261Z,1520565784.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:04.669Z,1520565784.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:05.057Z,1520565785.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:05.471Z,1520565785.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:05.871Z,1520565785.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:06.266Z,1520565786.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:06.662Z,1520565786.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:07.062Z,1520565787.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:07.460Z,1520565787.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:07.862Z,1520565787.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:08.261Z,1520565788.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:08.654Z,1520565788.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:09.061Z,1520565789.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:09.461Z,1520565789.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:09.859Z,1520565789.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:10.261Z,1520565790.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:10.661Z,1520565790.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:11.061Z,1520565791.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:11.461Z,1520565791.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:11.861Z,1520565791.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:12.262Z,1520565792.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:12.661Z,1520565792.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:13.062Z,1520565793.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:13.458Z,1520565793.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:13.861Z,1520565793.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:14.261Z,1520565794.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:14.658Z,1520565794.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:15.062Z,1520565795.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:15.461Z,1520565795.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:15.858Z,1520565795.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:16.262Z,1520565796.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:16.661Z,1520565796.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:17.066Z,1520565797.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:17.466Z,1520565797.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:17.861Z,1520565797.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:18.261Z,1520565798.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:18.663Z,1520565798.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:19.074Z,1520565799.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:19.451Z,1520565799.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:19.869Z,1520565799.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:20.280Z,1520565800.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:20.654Z,1520565800.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:21.054Z,1520565801.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:21.454Z,1520565801.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:21.852Z,1520565801.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:22.254Z,1520565802.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:22.654Z,1520565802.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:23.057Z,1520565803.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:23.458Z,1520565803.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:23.855Z,1520565803.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:24.254Z,1520565804.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:24.654Z,1520565804.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:25.054Z,1520565805.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:25.454Z,1520565805.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:25.854Z,1520565805.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:26.254Z,1520565806.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:26.654Z,1520565806.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:27.054Z,1520565807.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:27.454Z,1520565807.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:27.854Z,1520565807.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:28.254Z,1520565808.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:28.655Z,1520565808.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:29.054Z,1520565809.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:29.454Z,1520565809.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:29.854Z,1520565809.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:30.257Z,1520565810.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:30.654Z,1520565810.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:31.054Z,1520565811.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:31.454Z,1520565811.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:31.851Z,1520565811.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:32.266Z,1520565812.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:32.660Z,1520565812.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:33.060Z,1520565813.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:33.461Z,1520565813.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:33.860Z,1520565813.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:34.256Z,1520565814.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:34.660Z,1520565814.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:35.061Z,1520565815.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:35.460Z,1520565815.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:35.858Z,1520565815.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:36.265Z,1520565816.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:36.659Z,1520565816.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:37.067Z,1520565817.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:37.462Z,1520565817.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:37.859Z,1520565817.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:38.263Z,1520565818.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:38.661Z,1520565818.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:39.062Z,1520565819.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:39.461Z,1520565819.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:39.861Z,1520565819.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:40.262Z,1520565820.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:40.660Z,1520565820.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:41.061Z,1520565821.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:41.465Z,1520565821.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:41.860Z,1520565821.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:42.262Z,1520565822.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:42.659Z,1520565822.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:43.056Z,1520565823.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:46.380Z,1520565826.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:46.511Z,1520565826.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:46.906Z,1520565826.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:47.301Z,1520565827.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:47.714Z,1520565827.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:48.105Z,1520565828.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:48.498Z,1520565828.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:48.898Z,1520565828.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:49.295Z,1520565829.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:49.699Z,1520565829.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:50.095Z,1520565830.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:50.496Z,1520565830.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:50.882Z,1520565830.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:51.328Z,1520565831.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:51.693Z,1520565831.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:52.107Z,1520565832.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:52.521Z,1520565832.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:52.916Z,1520565832.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:53.292Z,1520565833.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:53.695Z,1520565833.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:54.122Z,1520565834.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:54.522Z,1520565834.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:54.901Z,1520565834.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:55.318Z,1520565835.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:55.695Z,1520565835.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:56.100Z,1520565836.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:56.492Z,1520565836.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:56.900Z,1520565836.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:57.298Z,1520565837.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:57.698Z,1520565837.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:58.096Z,1520565838.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:58.490Z,1520565838.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:58.900Z,1520565838.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:59.316Z,1520565839.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:23:59.685Z,1520565839.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:00.123Z,1520565840.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:00.514Z,1520565840.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:00.888Z,1520565840.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:01.302Z,1520565841.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:01.722Z,1520565841.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:02.119Z,1520565842.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:02.501Z,1520565842.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:02.915Z,1520565842.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:03.295Z,1520565843.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:03.695Z,1520565843.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:04.093Z,1520565844.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:04.501Z,1520565844.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:04.900Z,1520565844.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:05.293Z,1520565845.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:05.691Z,1520565845.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:06.093Z,1520565846.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:06.514Z,1520565846.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:06.888Z,1520565846.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:07.306Z,1520565847.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:07.731Z,1520565847.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:08.121Z,1520565848.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:08.509Z,1520565848.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:08.916Z,1520565848.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:09.288Z,1520565849.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:09.720Z,1520565849.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:10.095Z,1520565850.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:10.514Z,1520565850.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:10.894Z,1520565850.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:11.291Z,1520565851.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:11.683Z,1520565851.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:12.098Z,1520565852.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:12.493Z,1520565852.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:12.883Z,1520565852.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:13.288Z,1520565853.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:13.687Z,1520565853.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:14.139Z,1520565854.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:14.488Z,1520565854.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:14.943Z,1520565854.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:15.306Z,1520565855.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:15.701Z,1520565855.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:16.107Z,1520565856.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:16.512Z,1520565856.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:16.910Z,1520565856.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:17.301Z,1520565857.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:17.701Z,1520565857.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:18.109Z,1520565858.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:18.499Z,1520565858.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:18.898Z,1520565858.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:19.297Z,1520565859.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:19.703Z,1520565859.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:20.099Z,1520565860.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:20.488Z,1520565860.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:20.884Z,1520565860.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:21.287Z,1520565861.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:21.709Z,1520565861.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:22.126Z,1520565862.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:22.518Z,1520565862.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:22.911Z,1520565862.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:23.298Z,1520565863.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:23.699Z,1520565863.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:24.119Z,1520565864.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:24.515Z,1520565864.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:24.883Z,1520565864.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:25.300Z,1520565865.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:25.716Z,1520565865.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:26.091Z,1520565866.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:26.500Z,1520565866.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:26.894Z,1520565866.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:27.294Z,1520565867.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:27.696Z,1520565867.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:28.095Z,1520565868.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:28.495Z,1520565868.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:28.894Z,1520565868.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:29.313Z,1520565869.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:29.693Z,1520565869.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:30.107Z,1520565870.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:30.513Z,1520565870.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:30.913Z,1520565870.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:31.295Z,1520565871.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:31.709Z,1520565871.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:32.117Z,1520565872.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:32.517Z,1520565872.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:32.898Z,1520565872.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:33.310Z,1520565873.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:33.714Z,1520565873.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:34.103Z,1520565874.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:34.502Z,1520565874.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:34.888Z,1520565874.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:35.290Z,1520565875.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:35.688Z,1520565875.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:36.087Z,1520565876.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:36.487Z,1520565876.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:36.882Z,1520565876.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:37.319Z,1520565877.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:37.687Z,1520565877.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:38.125Z,1520565878.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:38.517Z,1520565878.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:38.890Z,1520565878.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:39.302Z,1520565879.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:39.717Z,1520565879.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:40.096Z,1520565880.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:40.516Z,1520565880.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:40.905Z,1520565880.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:40.927Z,1520565880.927 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T03:24:40.927Z,1520565880.927 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 53
2018-03-09T03:24:40.928Z,1520565880.928 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T03:24:40.984Z,1520565880.984 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T03:24:41.314Z,1520565881.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:41.379Z,1520565881.379 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T03:24:41.379Z,1520565881.379 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 53
2018-03-09T03:24:41.689Z,1520565881.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:41.726Z,1520565881.726 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T03:24:41.726Z,1520565881.726 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T03:24:41.727Z,1520565881.727 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T03:24:42.091Z,1520565882.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:42.488Z,1520565882.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:42.893Z,1520565882.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:43.294Z,1520565883.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:46.561Z,1520565886.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:46.671Z,1520565886.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:47.042Z,1520565887.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:47.432Z,1520565887.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:47.830Z,1520565887.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:48.235Z,1520565888.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:48.629Z,1520565888.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:49.031Z,1520565889.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:49.433Z,1520565889.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:49.834Z,1520565889.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:50.236Z,1520565890.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:50.634Z,1520565890.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:51.031Z,1520565891.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:51.430Z,1520565891.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:51.834Z,1520565891.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:52.234Z,1520565892.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:52.633Z,1520565892.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:53.034Z,1520565893.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:53.436Z,1520565893.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:53.829Z,1520565893.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:54.243Z,1520565894.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:54.636Z,1520565894.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:55.032Z,1520565895.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:55.433Z,1520565895.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:55.829Z,1520565895.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:56.229Z,1520565896.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:56.633Z,1520565896.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:57.030Z,1520565897.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:57.429Z,1520565897.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:57.834Z,1520565897.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:58.236Z,1520565898.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:58.633Z,1520565898.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:59.033Z,1520565899.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:59.433Z,1520565899.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:24:59.831Z,1520565899.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:00.229Z,1520565900.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:00.633Z,1520565900.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:01.025Z,1520565901.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:01.433Z,1520565901.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:01.834Z,1520565901.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:02.233Z,1520565902.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:02.629Z,1520565902.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:03.036Z,1520565903.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:03.426Z,1520565903.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:03.834Z,1520565903.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:04.232Z,1520565904.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:04.630Z,1520565904.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:05.026Z,1520565905.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:05.433Z,1520565905.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:05.831Z,1520565905.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:06.233Z,1520565906.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:06.634Z,1520565906.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:07.031Z,1520565907.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:07.443Z,1520565907.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:07.833Z,1520565907.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:08.223Z,1520565908.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:08.643Z,1520565908.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:09.038Z,1520565909.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:09.422Z,1520565909.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:09.837Z,1520565909.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:10.238Z,1520565910.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:10.626Z,1520565910.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:11.037Z,1520565911.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:11.439Z,1520565911.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:11.822Z,1520565911.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:12.225Z,1520565912.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:12.630Z,1520565912.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:13.026Z,1520565913.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:13.447Z,1520565913.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:13.830Z,1520565913.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:14.226Z,1520565914.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:14.645Z,1520565914.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:15.026Z,1520565915.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:15.426Z,1520565915.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:15.826Z,1520565915.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:16.230Z,1520565916.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:16.626Z,1520565916.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:17.026Z,1520565917.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:17.430Z,1520565917.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:17.822Z,1520565917.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:18.226Z,1520565918.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:18.630Z,1520565918.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:19.026Z,1520565919.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:19.429Z,1520565919.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:19.830Z,1520565919.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:20.226Z,1520565920.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:20.633Z,1520565920.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:21.026Z,1520565921.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:21.429Z,1520565921.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:21.832Z,1520565921.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:22.236Z,1520565922.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:22.630Z,1520565922.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:23.035Z,1520565923.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:23.429Z,1520565923.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:23.830Z,1520565923.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:24.229Z,1520565924.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:24.631Z,1520565924.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:25.034Z,1520565925.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:25.434Z,1520565925.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:25.834Z,1520565925.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:26.234Z,1520565926.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:26.642Z,1520565926.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:27.031Z,1520565927.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:27.429Z,1520565927.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:27.844Z,1520565927.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:28.233Z,1520565928.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:28.629Z,1520565928.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:29.042Z,1520565929.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:29.419Z,1520565929.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:29.822Z,1520565929.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:30.233Z,1520565930.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:30.623Z,1520565930.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:31.022Z,1520565931.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:31.433Z,1520565931.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:31.822Z,1520565931.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:32.222Z,1520565932.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:32.645Z,1520565932.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:33.023Z,1520565933.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:33.426Z,1520565933.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:33.826Z,1520565933.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:34.229Z,1520565934.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:34.626Z,1520565934.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:35.025Z,1520565935.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:35.427Z,1520565935.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:35.831Z,1520565935.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:36.230Z,1520565936.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:36.630Z,1520565936.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:37.032Z,1520565937.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:37.432Z,1520565937.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:37.829Z,1520565937.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:38.233Z,1520565938.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:38.634Z,1520565938.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:39.026Z,1520565939.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:39.442Z,1520565939.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:39.833Z,1520565939.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:40.232Z,1520565940.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:40.643Z,1520565940.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:41.033Z,1520565941.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:41.434Z,1520565941.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:41.833Z,1520565941.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:42.234Z,1520565942.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:42.630Z,1520565942.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:43.038Z,1520565943.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:43.432Z,1520565943.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:46.632Z,1520565946.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:46.747Z,1520565946.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:47.111Z,1520565947.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:47.501Z,1520565947.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:47.913Z,1520565947.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:48.310Z,1520565948.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:48.699Z,1520565948.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:49.114Z,1520565949.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:49.509Z,1520565949.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:49.899Z,1520565949.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:50.314Z,1520565950.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:50.710Z,1520565950.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:51.109Z,1520565951.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:51.514Z,1520565951.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:51.909Z,1520565951.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:52.310Z,1520565952.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:52.718Z,1520565952.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:53.121Z,1520565953.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:53.499Z,1520565953.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:53.910Z,1520565953.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:54.314Z,1520565954.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:54.699Z,1520565954.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:55.114Z,1520565955.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:55.509Z,1520565955.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:55.899Z,1520565955.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:56.311Z,1520565956.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:56.714Z,1520565956.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:57.110Z,1520565957.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:57.514Z,1520565957.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:57.905Z,1520565957.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:58.313Z,1520565958.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:58.714Z,1520565958.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:59.118Z,1520565959.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:59.499Z,1520565959.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:25:59.902Z,1520565959.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:00.302Z,1520565960.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:00.701Z,1520565960.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:01.103Z,1520565961.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:01.502Z,1520565961.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:01.898Z,1520565961.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:02.302Z,1520565962.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:02.702Z,1520565962.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:03.101Z,1520565963.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:03.514Z,1520565963.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:03.902Z,1520565963.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:04.301Z,1520565964.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:04.700Z,1520565964.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:05.102Z,1520565965.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:05.503Z,1520565965.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:05.896Z,1520565965.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:06.303Z,1520565966.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:06.702Z,1520565966.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:07.110Z,1520565967.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:07.519Z,1520565967.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:07.911Z,1520565967.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:08.311Z,1520565968.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:08.720Z,1520565968.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:09.110Z,1520565969.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:09.507Z,1520565969.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:09.908Z,1520565969.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:10.314Z,1520565970.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:10.707Z,1520565970.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:11.108Z,1520565971.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:11.510Z,1520565971.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:11.909Z,1520565971.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:12.310Z,1520565972.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:12.709Z,1520565972.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:13.107Z,1520565973.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:13.519Z,1520565973.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:13.913Z,1520565973.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:14.309Z,1520565974.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:14.709Z,1520565974.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:15.109Z,1520565975.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:15.505Z,1520565975.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:15.902Z,1520565975.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:16.298Z,1520565976.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:16.695Z,1520565976.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:17.102Z,1520565977.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:17.497Z,1520565977.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:17.895Z,1520565977.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:18.302Z,1520565978.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:18.702Z,1520565978.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:19.099Z,1520565979.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:19.514Z,1520565979.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:19.906Z,1520565979.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:20.309Z,1520565980.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:20.707Z,1520565980.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:21.110Z,1520565981.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:21.506Z,1520565981.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:21.908Z,1520565981.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:22.309Z,1520565982.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:22.705Z,1520565982.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:23.115Z,1520565983.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:23.509Z,1520565983.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:23.906Z,1520565983.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:24.305Z,1520565984.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:24.713Z,1520565984.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:25.114Z,1520565985.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:25.505Z,1520565985.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:25.910Z,1520565985.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:26.309Z,1520565986.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:26.705Z,1520565986.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:27.110Z,1520565987.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:27.499Z,1520565987.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:27.911Z,1520565987.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:28.310Z,1520565988.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:28.699Z,1520565988.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:29.109Z,1520565989.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:29.510Z,1520565989.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:29.900Z,1520565989.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:30.321Z,1520565990.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:30.713Z,1520565990.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:31.113Z,1520565991.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:31.505Z,1520565991.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:31.902Z,1520565991.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:32.313Z,1520565992.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:32.702Z,1520565992.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:33.105Z,1520565993.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:33.499Z,1520565993.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:33.902Z,1520565993.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:34.298Z,1520565994.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:34.702Z,1520565994.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:35.102Z,1520565995.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:35.507Z,1520565995.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:35.903Z,1520565995.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:36.310Z,1520565996.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:36.711Z,1520565996.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:37.106Z,1520565997.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:37.505Z,1520565997.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:37.914Z,1520565997.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:38.309Z,1520565998.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:38.705Z,1520565998.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:39.113Z,1520565999.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:39.500Z,1520565999.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:39.905Z,1520565999.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:40.309Z,1520566000.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:40.711Z,1520566000.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:41.105Z,1520566001.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:41.511Z,1520566001.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:41.911Z,1520566001.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:42.309Z,1520566002.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:42.335Z,1520566002.335 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-09T03:26:42.335Z,1520566002.335 [Default:CheckIn:C.Wait] Stopped
2018-03-09T03:26:42.335Z,1520566002.335 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-09T03:26:42.335Z,1520566002.335 [Default:CheckIn:D] Running Loop=1
2018-03-09T03:26:42.711Z,1520566002.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:42.731Z,1520566002.731 [Default:CheckIn:D] Stopped
2018-03-09T03:26:42.731Z,1520566002.731 [Default:CheckIn:E] Running Loop=1
2018-03-09T03:26:43.112Z,1520566003.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:43.132Z,1520566003.132 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1180.965495 min 
2018-03-09T03:26:43.132Z,1520566003.132 [Default:CheckIn:E] Stopped
2018-03-09T03:26:43.133Z,1520566003.133 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-09T03:26:43.133Z,1520566003.133 [Default:CheckIn] Stopped
2018-03-09T03:26:43.133Z,1520566003.133 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-09T03:26:43.133Z,1520566003.133 [Default:CheckIn](INFO): Running loop #119
2018-03-09T03:26:43.133Z,1520566003.133 [Default:CheckIn] Running Loop=119
2018-03-09T03:26:43.133Z,1520566003.133 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-09T03:26:43.133Z,1520566003.133 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-09T03:26:43.512Z,1520566003.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:46.634Z,1520566006.634 [NAL9602](INFO): Powering up
2018-03-09T03:26:46.659Z,1520566006.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:46.767Z,1520566006.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:47.130Z,1520566007.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:47.525Z,1520566007.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:47.925Z,1520566007.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:48.337Z,1520566008.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:48.730Z,1520566008.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:49.131Z,1520566009.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:49.538Z,1520566009.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:49.929Z,1520566009.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:50.324Z,1520566010.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:50.729Z,1520566010.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:51.129Z,1520566011.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:51.526Z,1520566011.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:51.929Z,1520566011.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:52.333Z,1520566012.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:52.726Z,1520566012.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:53.139Z,1520566013.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:53.533Z,1520566013.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:53.919Z,1520566013.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:54.342Z,1520566014.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:54.733Z,1520566014.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:55.131Z,1520566015.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:55.530Z,1520566015.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:55.930Z,1520566015.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:56.330Z,1520566016.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:56.730Z,1520566016.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:57.142Z,1520566017.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:57.505Z,1520566017.505 [NAL9602](INFO): NAL9602 initialized
2018-03-09T03:26:57.534Z,1520566017.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:57.943Z,1520566017.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:58.343Z,1520566018.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:58.740Z,1520566018.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:59.141Z,1520566019.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:59.518Z,1520566019.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:26:59.922Z,1520566019.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:00.334Z,1520566020.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:00.721Z,1520566020.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:01.122Z,1520566021.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:01.522Z,1520566021.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:01.921Z,1520566021.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:02.322Z,1520566022.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:02.730Z,1520566022.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:03.126Z,1520566023.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:03.529Z,1520566023.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:03.925Z,1520566023.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:04.329Z,1520566024.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:04.731Z,1520566024.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:05.130Z,1520566025.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:05.530Z,1520566025.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:05.929Z,1520566025.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:06.330Z,1520566026.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:06.733Z,1520566026.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:07.129Z,1520566027.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:07.535Z,1520566027.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:07.930Z,1520566027.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:08.329Z,1520566028.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:08.730Z,1520566028.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:09.130Z,1520566029.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:09.530Z,1520566029.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:09.930Z,1520566029.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:10.330Z,1520566030.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:10.729Z,1520566030.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:11.130Z,1520566031.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:11.533Z,1520566031.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:11.929Z,1520566031.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:12.335Z,1520566032.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:12.734Z,1520566032.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:13.129Z,1520566033.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:13.530Z,1520566033.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:13.928Z,1520566033.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:14.334Z,1520566034.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:14.730Z,1520566034.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:15.134Z,1520566035.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:15.529Z,1520566035.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:15.939Z,1520566035.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:16.334Z,1520566036.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:16.729Z,1520566036.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:17.132Z,1520566037.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:17.530Z,1520566037.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:17.929Z,1520566037.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:18.331Z,1520566038.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:18.730Z,1520566038.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:19.130Z,1520566039.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:19.531Z,1520566039.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:19.934Z,1520566039.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:20.330Z,1520566040.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:20.732Z,1520566040.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:21.135Z,1520566041.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:21.540Z,1520566041.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:21.937Z,1520566041.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:22.330Z,1520566042.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:22.731Z,1520566042.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:23.132Z,1520566043.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:23.531Z,1520566043.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:23.931Z,1520566043.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:24.333Z,1520566044.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:24.402Z,1520566044.402 [CBIT](INFO): Clearing failed state for component DropWeight
2018-03-09T03:27:24.402Z,1520566044.402 [DropWeight] No Fault, FailCount= 1
2018-03-09T03:27:24.732Z,1520566044.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:25.130Z,1520566045.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:25.546Z,1520566045.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:25.918Z,1520566045.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:26.324Z,1520566046.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:26.732Z,1520566046.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:27.131Z,1520566047.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:27.529Z,1520566047.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:27.929Z,1520566047.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:28.330Z,1520566048.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:28.731Z,1520566048.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:29.131Z,1520566049.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:29.503Z,1520566049.503 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-09T03:27:29.581Z,1520566049.581 [NAL9602](FAULT): received: 
+CSQ:0

OK12, 2, 0, 0, 0

OK
2018-03-09T03:27:29.581Z,1520566049.581 [NAL9602] Data Fault, FailCount= 5
2018-03-09T03:27:29.581Z,1520566049.581 [NAL9602](ERROR): Data Fault
2018-03-09T03:27:29.598Z,1520566049.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:29.701Z,1520566049.701 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-09T03:27:29.701Z,1520566049.701 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-09T03:27:29.906Z,1520566049.906 [NAL9602](INFO): Powering down
2018-03-09T03:27:29.937Z,1520566049.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:29.966Z,1520566049.966 [CBIT](INFO): Critical error at 20180309T032729
2018-03-09T03:27:30.331Z,1520566050.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:30.731Z,1520566050.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:31.129Z,1520566051.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:31.543Z,1520566051.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:31.919Z,1520566051.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:32.333Z,1520566052.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:32.721Z,1520566052.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:33.133Z,1520566053.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:33.535Z,1520566053.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:33.922Z,1520566053.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:34.319Z,1520566054.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:34.733Z,1520566054.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:35.122Z,1520566055.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:35.521Z,1520566055.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:35.922Z,1520566055.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:36.342Z,1520566056.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:36.719Z,1520566056.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:37.122Z,1520566057.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:37.522Z,1520566057.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:37.915Z,1520566057.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:38.322Z,1520566058.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:38.722Z,1520566058.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:39.125Z,1520566059.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:39.522Z,1520566059.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:39.922Z,1520566059.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:40.330Z,1520566060.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:40.730Z,1520566060.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:41.134Z,1520566061.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:41.525Z,1520566061.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:41.938Z,1520566061.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:41.965Z,1520566061.965 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T03:27:41.966Z,1520566061.966 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 54
2018-03-09T03:27:41.966Z,1520566061.966 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T03:27:41.978Z,1520566061.978 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T03:27:42.326Z,1520566062.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:42.389Z,1520566062.389 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T03:27:42.389Z,1520566062.389 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 54
2018-03-09T03:27:42.726Z,1520566062.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:42.743Z,1520566062.743 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T03:27:42.744Z,1520566062.744 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T03:27:42.744Z,1520566062.744 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T03:27:43.130Z,1520566063.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:43.531Z,1520566063.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:46.728Z,1520566066.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:46.839Z,1520566066.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:47.227Z,1520566067.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:47.612Z,1520566067.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:48.026Z,1520566068.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:48.437Z,1520566068.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:48.822Z,1520566068.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:49.225Z,1520566069.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:49.634Z,1520566069.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:50.011Z,1520566070.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:50.430Z,1520566070.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:50.825Z,1520566070.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:51.222Z,1520566071.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:51.622Z,1520566071.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:52.021Z,1520566072.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:52.420Z,1520566072.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:52.825Z,1520566072.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:53.228Z,1520566073.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:53.615Z,1520566073.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:54.025Z,1520566074.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:54.418Z,1520566074.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:54.815Z,1520566074.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:55.243Z,1520566075.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:55.618Z,1520566075.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:56.015Z,1520566076.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:56.431Z,1520566076.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:56.824Z,1520566076.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:57.225Z,1520566077.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:57.630Z,1520566077.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:58.029Z,1520566078.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:58.422Z,1520566078.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:58.818Z,1520566078.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:59.223Z,1520566079.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:27:59.615Z,1520566079.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:00.024Z,1520566080.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:00.424Z,1520566080.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:00.821Z,1520566080.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:01.224Z,1520566081.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:01.621Z,1520566081.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:02.021Z,1520566082.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:02.421Z,1520566082.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:02.818Z,1520566082.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:03.222Z,1520566083.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:03.621Z,1520566083.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:04.018Z,1520566084.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:04.422Z,1520566084.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:04.825Z,1520566084.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:05.224Z,1520566085.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:05.622Z,1520566085.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:06.033Z,1520566086.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:06.421Z,1520566086.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:06.826Z,1520566086.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:07.219Z,1520566087.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:07.622Z,1520566087.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:08.024Z,1520566088.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:08.425Z,1520566088.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:08.825Z,1520566088.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:09.231Z,1520566089.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:09.616Z,1520566089.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:10.018Z,1520566090.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:10.435Z,1520566090.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:10.815Z,1520566090.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:11.234Z,1520566091.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:11.625Z,1520566091.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:12.027Z,1520566092.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:12.439Z,1520566092.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:12.814Z,1520566092.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:13.214Z,1520566093.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:13.626Z,1520566093.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:14.030Z,1520566094.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:14.426Z,1520566094.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:14.827Z,1520566094.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:15.227Z,1520566095.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:15.621Z,1520566095.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:16.020Z,1520566096.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:16.430Z,1520566096.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:16.814Z,1520566096.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:17.238Z,1520566097.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:17.614Z,1520566097.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:18.011Z,1520566098.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:18.418Z,1520566098.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:18.823Z,1520566098.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:19.226Z,1520566099.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:19.634Z,1520566099.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:20.026Z,1520566100.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:20.421Z,1520566100.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:20.835Z,1520566100.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:21.214Z,1520566101.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:21.614Z,1520566101.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:22.026Z,1520566102.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:22.420Z,1520566102.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:22.820Z,1520566102.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:23.224Z,1520566103.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:23.624Z,1520566103.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:24.022Z,1520566104.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:24.421Z,1520566104.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:24.829Z,1520566104.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:25.214Z,1520566105.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:25.622Z,1520566105.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:26.018Z,1520566106.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:26.426Z,1520566106.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:26.826Z,1520566106.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:27.225Z,1520566107.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:27.621Z,1520566107.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:28.021Z,1520566108.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:28.413Z,1520566108.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:28.811Z,1520566108.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:29.222Z,1520566109.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:29.629Z,1520566109.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:30.014Z,1520566110.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:30.418Z,1520566110.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:30.822Z,1520566110.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:31.222Z,1520566111.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:31.618Z,1520566111.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:32.017Z,1520566112.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:32.425Z,1520566112.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:32.823Z,1520566112.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:33.225Z,1520566113.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:33.619Z,1520566113.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:34.035Z,1520566114.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:34.430Z,1520566114.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:34.814Z,1520566114.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:35.218Z,1520566115.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:35.629Z,1520566115.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:36.015Z,1520566116.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:36.418Z,1520566116.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:36.825Z,1520566116.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:37.226Z,1520566117.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:37.625Z,1520566117.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:38.026Z,1520566118.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:38.425Z,1520566118.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:38.831Z,1520566118.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:39.225Z,1520566119.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:39.628Z,1520566119.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:40.025Z,1520566120.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:40.419Z,1520566120.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:40.819Z,1520566120.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:41.225Z,1520566121.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:41.619Z,1520566121.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:42.026Z,1520566122.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:42.427Z,1520566122.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:42.827Z,1520566122.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:43.219Z,1520566123.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:43.634Z,1520566123.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:47.980Z,1520566127.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:48.098Z,1520566128.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:48.461Z,1520566128.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:48.862Z,1520566128.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:49.250Z,1520566129.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:49.649Z,1520566129.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:50.041Z,1520566130.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:50.442Z,1520566130.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:50.841Z,1520566130.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:51.245Z,1520566131.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:51.635Z,1520566131.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:52.048Z,1520566132.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:52.451Z,1520566132.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:52.843Z,1520566132.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:53.263Z,1520566133.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:53.653Z,1520566133.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:54.035Z,1520566134.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:54.441Z,1520566134.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:54.837Z,1520566134.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:55.246Z,1520566135.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:55.642Z,1520566135.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:56.045Z,1520566136.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:56.447Z,1520566136.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:56.846Z,1520566136.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:57.246Z,1520566137.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:57.638Z,1520566137.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:58.047Z,1520566138.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:58.445Z,1520566138.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:58.847Z,1520566138.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:59.250Z,1520566139.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:28:59.647Z,1520566139.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:00.038Z,1520566140.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:00.450Z,1520566140.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:00.837Z,1520566140.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:01.257Z,1520566141.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:01.642Z,1520566141.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:02.037Z,1520566142.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:02.438Z,1520566142.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:02.847Z,1520566142.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:03.245Z,1520566143.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:03.639Z,1520566143.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:04.045Z,1520566144.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:04.442Z,1520566144.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:04.838Z,1520566144.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:05.246Z,1520566145.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:05.644Z,1520566145.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:06.039Z,1520566146.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:06.441Z,1520566146.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:06.849Z,1520566146.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:07.243Z,1520566147.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:07.657Z,1520566147.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:08.053Z,1520566148.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:08.453Z,1520566148.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:08.855Z,1520566148.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:09.242Z,1520566149.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:09.639Z,1520566149.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:10.050Z,1520566150.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:10.455Z,1520566150.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:10.839Z,1520566150.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:11.241Z,1520566151.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:11.643Z,1520566151.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:12.039Z,1520566152.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:12.441Z,1520566152.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:12.846Z,1520566152.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:13.246Z,1520566153.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:13.642Z,1520566153.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:14.048Z,1520566154.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:14.439Z,1520566154.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:14.846Z,1520566154.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:15.246Z,1520566155.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:15.643Z,1520566155.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:16.049Z,1520566156.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:16.450Z,1520566156.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:16.846Z,1520566156.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:17.251Z,1520566157.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:17.648Z,1520566157.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:18.047Z,1520566158.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:18.452Z,1520566158.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:18.850Z,1520566158.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:19.249Z,1520566159.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:19.658Z,1520566159.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:20.055Z,1520566160.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:20.438Z,1520566160.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:20.845Z,1520566160.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:21.243Z,1520566161.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:21.638Z,1520566161.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:22.101Z,1520566162.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:22.445Z,1520566162.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:22.842Z,1520566162.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:23.242Z,1520566163.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:23.645Z,1520566163.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:24.049Z,1520566164.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:24.442Z,1520566164.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:24.846Z,1520566164.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:25.253Z,1520566165.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:25.654Z,1520566165.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:26.047Z,1520566166.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:26.448Z,1520566166.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:26.865Z,1520566166.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:27.251Z,1520566167.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:27.650Z,1520566167.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:28.056Z,1520566168.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:28.458Z,1520566168.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:28.838Z,1520566168.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:29.246Z,1520566169.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:29.635Z,1520566169.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:29.709Z,1520566169.709 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-09T03:29:29.709Z,1520566169.709 [NAL9602] No Fault, FailCount= 5
2018-03-09T03:29:30.022Z,1520566170.022 [NAL9602](INFO): Powering up NAL9602
2018-03-09T03:29:30.039Z,1520566170.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:30.446Z,1520566170.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:30.842Z,1520566170.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:31.250Z,1520566171.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:31.652Z,1520566171.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:32.059Z,1520566172.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:32.450Z,1520566172.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:32.850Z,1520566172.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:33.253Z,1520566173.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:33.638Z,1520566173.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:34.055Z,1520566174.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:34.440Z,1520566174.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:34.842Z,1520566174.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:35.242Z,1520566175.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:35.641Z,1520566175.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:36.038Z,1520566176.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:36.442Z,1520566176.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:36.840Z,1520566176.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:37.248Z,1520566177.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:37.691Z,1520566177.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:38.048Z,1520566178.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:38.450Z,1520566178.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:38.852Z,1520566178.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:39.246Z,1520566179.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:39.659Z,1520566179.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:40.050Z,1520566180.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:40.459Z,1520566180.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:40.826Z,1520566180.826 [NAL9602](INFO): NAL9602 initialized
2018-03-09T03:29:40.862Z,1520566180.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:41.242Z,1520566181.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:41.626Z,1520566181.626 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-09T03:29:41.626Z,1520566181.626 [NAL9602] Data Fault, FailCount= 1
2018-03-09T03:29:41.626Z,1520566181.626 [NAL9602](ERROR): Data Fault
2018-03-09T03:29:41.647Z,1520566181.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:41.741Z,1520566181.741 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-09T03:29:42.026Z,1520566182.026 [NAL9602](INFO): Powering down
2018-03-09T03:29:42.043Z,1520566182.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:42.442Z,1520566182.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:42.838Z,1520566182.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:42.928Z,1520566182.928 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-09T03:29:42.928Z,1520566182.928 [NAL9602] No Fault, FailCount= 1
2018-03-09T03:29:43.238Z,1520566183.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:43.642Z,1520566183.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:47.019Z,1520566187.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:47.136Z,1520566187.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:47.498Z,1520566187.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:47.885Z,1520566187.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:48.292Z,1520566188.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:48.691Z,1520566188.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:49.091Z,1520566189.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:49.491Z,1520566189.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:49.900Z,1520566189.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:50.286Z,1520566190.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:50.690Z,1520566190.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:51.098Z,1520566191.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:51.488Z,1520566191.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:51.886Z,1520566191.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:52.290Z,1520566192.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:52.686Z,1520566192.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:53.090Z,1520566193.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:53.487Z,1520566193.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:53.878Z,1520566193.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:54.294Z,1520566194.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:54.690Z,1520566194.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:55.090Z,1520566195.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:55.478Z,1520566195.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:55.882Z,1520566195.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:56.282Z,1520566196.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:56.678Z,1520566196.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:57.089Z,1520566197.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:57.479Z,1520566197.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:57.882Z,1520566197.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:58.283Z,1520566198.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:58.675Z,1520566198.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:59.082Z,1520566199.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:59.490Z,1520566199.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:29:59.886Z,1520566199.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:00.291Z,1520566200.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:00.689Z,1520566200.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:01.085Z,1520566201.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:01.487Z,1520566201.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:01.898Z,1520566201.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:02.293Z,1520566202.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:02.690Z,1520566202.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:03.098Z,1520566203.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:03.486Z,1520566203.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:03.890Z,1520566203.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:04.299Z,1520566204.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:04.686Z,1520566204.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:05.091Z,1520566205.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:05.490Z,1520566205.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:05.886Z,1520566205.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:06.286Z,1520566206.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:06.690Z,1520566206.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:07.086Z,1520566207.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:07.489Z,1520566207.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:07.890Z,1520566207.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:08.290Z,1520566208.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:08.699Z,1520566208.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:09.090Z,1520566209.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:09.490Z,1520566209.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:09.895Z,1520566209.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:10.290Z,1520566210.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:10.685Z,1520566210.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:11.089Z,1520566211.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:11.490Z,1520566211.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:11.886Z,1520566211.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:12.266Z,1520566212.266 [NAL9602](INFO): Powering up NAL9602
2018-03-09T03:30:12.289Z,1520566212.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:12.694Z,1520566212.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:13.079Z,1520566213.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:13.486Z,1520566213.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:13.885Z,1520566213.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:14.278Z,1520566214.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:14.691Z,1520566214.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:15.085Z,1520566215.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:15.490Z,1520566215.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:15.885Z,1520566215.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:16.302Z,1520566216.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:16.678Z,1520566216.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:17.101Z,1520566217.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:17.489Z,1520566217.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:17.890Z,1520566217.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:18.285Z,1520566218.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:18.682Z,1520566218.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:19.078Z,1520566219.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:19.492Z,1520566219.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:19.893Z,1520566219.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:20.278Z,1520566220.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:20.694Z,1520566220.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:21.081Z,1520566221.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:21.495Z,1520566221.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:21.885Z,1520566221.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:22.301Z,1520566222.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:22.698Z,1520566222.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:23.066Z,1520566223.066 [NAL9602](INFO): NAL9602 initialized
2018-03-09T03:30:23.095Z,1520566223.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:23.502Z,1520566223.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:23.903Z,1520566223.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:24.305Z,1520566224.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:24.706Z,1520566224.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:25.079Z,1520566225.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:25.484Z,1520566225.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:25.900Z,1520566225.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:26.301Z,1520566226.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:26.697Z,1520566226.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:27.082Z,1520566227.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:27.478Z,1520566227.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:27.890Z,1520566227.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:28.286Z,1520566228.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:28.686Z,1520566228.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:29.090Z,1520566229.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:29.490Z,1520566229.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:29.889Z,1520566229.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:30.290Z,1520566230.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:30.701Z,1520566230.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:31.095Z,1520566231.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:31.500Z,1520566231.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:31.902Z,1520566231.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:32.278Z,1520566232.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:32.678Z,1520566232.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:33.095Z,1520566233.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:33.478Z,1520566233.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:33.891Z,1520566233.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:34.289Z,1520566234.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:34.686Z,1520566234.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:35.082Z,1520566235.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:35.482Z,1520566235.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:35.894Z,1520566235.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:36.293Z,1520566236.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:36.707Z,1520566236.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:37.093Z,1520566237.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:37.482Z,1520566237.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:37.882Z,1520566237.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:38.282Z,1520566238.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:38.687Z,1520566238.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:39.091Z,1520566239.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:39.488Z,1520566239.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:39.890Z,1520566239.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:40.290Z,1520566240.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:40.688Z,1520566240.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:41.096Z,1520566241.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:41.497Z,1520566241.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:41.897Z,1520566241.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:42.297Z,1520566242.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:42.701Z,1520566242.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:43.081Z,1520566243.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:43.122Z,1520566243.122 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T03:30:43.122Z,1520566243.122 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 55
2018-03-09T03:30:43.122Z,1520566243.122 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T03:30:43.154Z,1520566243.154 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T03:30:43.482Z,1520566243.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:43.524Z,1520566243.524 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T03:30:43.524Z,1520566243.524 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 55
2018-03-09T03:30:43.903Z,1520566243.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:43.926Z,1520566243.926 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T03:30:43.926Z,1520566243.926 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T03:30:43.926Z,1520566243.926 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T03:30:47.117Z,1520566247.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:47.248Z,1520566247.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:47.624Z,1520566247.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:48.024Z,1520566248.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:48.422Z,1520566248.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:48.833Z,1520566248.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:49.234Z,1520566249.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:49.610Z,1520566249.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:50.018Z,1520566250.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:50.414Z,1520566250.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:50.822Z,1520566250.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:51.222Z,1520566251.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:51.618Z,1520566251.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:52.022Z,1520566252.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:52.431Z,1520566252.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:52.813Z,1520566252.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:53.226Z,1520566253.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:53.614Z,1520566253.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:54.010Z,1520566254.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:54.422Z,1520566254.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:54.822Z,1520566254.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:55.219Z,1520566255.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:55.619Z,1520566255.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:56.018Z,1520566256.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:56.418Z,1520566256.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:56.821Z,1520566256.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:57.235Z,1520566257.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:57.628Z,1520566257.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:58.025Z,1520566258.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:58.426Z,1520566258.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:58.824Z,1520566258.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:59.218Z,1520566259.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:30:59.632Z,1520566259.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:00.013Z,1520566260.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:00.418Z,1520566260.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:00.817Z,1520566260.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:01.214Z,1520566261.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:01.615Z,1520566261.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:02.014Z,1520566262.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:02.418Z,1520566262.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:02.810Z,1520566262.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:03.226Z,1520566263.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:03.620Z,1520566263.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:04.022Z,1520566264.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:04.422Z,1520566264.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:04.814Z,1520566264.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:05.222Z,1520566265.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:05.633Z,1520566265.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:06.031Z,1520566266.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:06.437Z,1520566266.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:06.814Z,1520566266.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:07.220Z,1520566267.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:07.623Z,1520566267.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:08.019Z,1520566268.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:08.424Z,1520566268.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:08.818Z,1520566268.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:09.217Z,1520566269.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:09.626Z,1520566269.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:10.010Z,1520566270.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:10.419Z,1520566270.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:10.810Z,1520566270.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:11.215Z,1520566271.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:11.614Z,1520566271.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:12.018Z,1520566272.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:12.413Z,1520566272.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:12.814Z,1520566272.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:13.223Z,1520566273.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:13.622Z,1520566273.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:14.021Z,1520566274.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:14.421Z,1520566274.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:14.822Z,1520566274.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:15.232Z,1520566275.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:15.628Z,1520566275.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:16.015Z,1520566276.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:16.423Z,1520566276.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:16.822Z,1520566276.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:17.223Z,1520566277.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:17.623Z,1520566277.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:18.019Z,1520566278.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:18.418Z,1520566278.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:18.823Z,1520566278.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:19.232Z,1520566279.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:19.636Z,1520566279.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:20.036Z,1520566280.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:20.418Z,1520566280.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:20.814Z,1520566280.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:21.214Z,1520566281.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:21.614Z,1520566281.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:22.022Z,1520566282.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:22.430Z,1520566282.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:22.824Z,1520566282.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:23.228Z,1520566283.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:23.633Z,1520566283.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:24.037Z,1520566284.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:24.428Z,1520566284.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:24.814Z,1520566284.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:25.214Z,1520566285.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:25.615Z,1520566285.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:26.019Z,1520566286.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:26.420Z,1520566286.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:26.822Z,1520566286.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:27.219Z,1520566287.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:27.618Z,1520566287.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:28.025Z,1520566288.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:28.438Z,1520566288.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:28.825Z,1520566288.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:29.238Z,1520566289.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:29.641Z,1520566289.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:30.022Z,1520566290.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:30.419Z,1520566290.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:30.823Z,1520566290.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:31.222Z,1520566291.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:31.618Z,1520566291.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:32.023Z,1520566292.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:32.427Z,1520566292.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:32.810Z,1520566292.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:33.234Z,1520566293.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:33.625Z,1520566293.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:34.021Z,1520566294.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:34.429Z,1520566294.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:34.814Z,1520566294.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:35.222Z,1520566295.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:35.630Z,1520566295.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:36.024Z,1520566296.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:36.422Z,1520566296.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:36.823Z,1520566296.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:37.227Z,1520566297.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:37.614Z,1520566297.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:38.026Z,1520566298.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:38.432Z,1520566298.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:38.833Z,1520566298.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:39.233Z,1520566299.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:39.633Z,1520566299.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:40.022Z,1520566300.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:40.422Z,1520566300.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:40.826Z,1520566300.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:41.226Z,1520566301.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:41.631Z,1520566301.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:42.028Z,1520566302.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:42.410Z,1520566302.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:42.828Z,1520566302.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:43.221Z,1520566303.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:43.246Z,1520566303.246 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-09T03:26:43.1Z
2018-03-09T03:31:43.246Z,1520566303.246 [Default:CheckIn:Read_GPS] Stopped
2018-03-09T03:31:43.247Z,1520566303.247 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-09T03:31:43.629Z,1520566303.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:44.169Z,1520566304.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:47.258Z,1520566307.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:47.391Z,1520566307.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:47.749Z,1520566307.749 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180308T074127/Courier0476.lzma
2018-03-09T03:31:47.774Z,1520566307.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:48.167Z,1520566308.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:48.548Z,1520566308.548 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0476.lzma.bak
2018-03-09T03:31:48.548Z,1520566308.548 [DataOverHttps](INFO): SBD MOMSN=7991873
2018-03-09T03:31:48.575Z,1520566308.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:49.260Z,1520566309.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:49.396Z,1520566309.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:49.785Z,1520566309.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:53.095Z,1520566313.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:53.212Z,1520566313.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:53.568Z,1520566313.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:53.969Z,1520566313.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:54.372Z,1520566314.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:54.776Z,1520566314.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:55.181Z,1520566315.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:58.418Z,1520566318.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:58.547Z,1520566318.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:58.866Z,1520566318.866 [DataOverHttps](INFO): Sending 254 bytes from file Logs/20180308T074127/Express0477.lzma
2018-03-09T03:31:58.938Z,1520566318.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:59.341Z,1520566319.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:31:59.665Z,1520566319.665 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0477.lzma.bak
2018-03-09T03:31:59.665Z,1520566319.665 [DataOverHttps](INFO): SBD MOMSN=7991876
2018-03-09T03:31:59.738Z,1520566319.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:00.331Z,1520566320.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:00.350Z,1520566320.350 [Default:CheckIn:Read_Iridium] Stopped
2018-03-09T03:32:00.350Z,1520566320.350 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-09T03:32:00.350Z,1520566320.350 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-09T03:32:00.466Z,1520566320.466 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-09T03:32:00.499Z,1520566320.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:03.623Z,1520566323.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:03.764Z,1520566323.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:04.164Z,1520566324.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:04.550Z,1520566324.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:04.954Z,1520566324.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:05.351Z,1520566325.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:05.750Z,1520566325.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:06.150Z,1520566326.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:06.551Z,1520566326.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:06.999Z,1520566326.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:07.353Z,1520566327.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:07.785Z,1520566327.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:08.155Z,1520566328.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:08.552Z,1520566328.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:08.975Z,1520566328.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:09.352Z,1520566329.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:09.766Z,1520566329.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:10.152Z,1520566330.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:10.239Z,1520566330.239 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-09T03:32:10.601Z,1520566330.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:10.946Z,1520566330.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:11.387Z,1520566331.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:11.756Z,1520566331.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:12.149Z,1520566332.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:12.558Z,1520566332.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:12.960Z,1520566332.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:13.360Z,1520566333.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:13.768Z,1520566333.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:14.154Z,1520566334.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:14.558Z,1520566334.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:14.970Z,1520566334.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:15.360Z,1520566335.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:15.750Z,1520566335.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:16.150Z,1520566336.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:16.546Z,1520566336.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:16.943Z,1520566336.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:17.357Z,1520566337.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:17.750Z,1520566337.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:18.150Z,1520566338.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:18.570Z,1520566338.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:18.946Z,1520566338.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:19.351Z,1520566339.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:19.750Z,1520566339.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:20.146Z,1520566340.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:20.547Z,1520566340.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:20.950Z,1520566340.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:21.351Z,1520566341.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:21.757Z,1520566341.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:22.157Z,1520566342.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:22.559Z,1520566342.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:22.955Z,1520566342.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:23.356Z,1520566343.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:23.761Z,1520566343.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:24.156Z,1520566344.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:24.562Z,1520566344.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:24.954Z,1520566344.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:25.356Z,1520566345.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:25.757Z,1520566345.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:26.159Z,1520566346.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:26.555Z,1520566346.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:26.956Z,1520566346.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:27.362Z,1520566347.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:27.755Z,1520566347.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:28.168Z,1520566348.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:28.562Z,1520566348.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:28.946Z,1520566348.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:29.361Z,1520566349.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:29.750Z,1520566349.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:30.143Z,1520566350.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:30.550Z,1520566350.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:30.952Z,1520566350.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:31.362Z,1520566351.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:31.751Z,1520566351.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:32.150Z,1520566352.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:32.547Z,1520566352.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:32.950Z,1520566352.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:33.346Z,1520566353.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:33.727Z,1520566353.727 [NAL9602](INFO): Powering down
2018-03-09T03:32:33.746Z,1520566353.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:34.170Z,1520566354.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:34.550Z,1520566354.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:34.948Z,1520566354.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:35.351Z,1520566355.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:35.754Z,1520566355.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:36.146Z,1520566356.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:36.550Z,1520566356.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:36.958Z,1520566356.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:37.360Z,1520566357.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:37.757Z,1520566357.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:38.157Z,1520566358.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:38.555Z,1520566358.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:38.964Z,1520566358.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:39.350Z,1520566359.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:39.750Z,1520566359.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:40.150Z,1520566360.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:40.550Z,1520566360.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:40.946Z,1520566360.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:41.351Z,1520566361.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:41.750Z,1520566361.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:42.148Z,1520566362.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:42.552Z,1520566362.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:42.949Z,1520566362.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:43.352Z,1520566363.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:43.763Z,1520566363.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:44.158Z,1520566364.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:44.553Z,1520566364.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:44.957Z,1520566364.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:45.358Z,1520566365.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:45.754Z,1520566365.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:46.158Z,1520566366.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:46.558Z,1520566366.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:46.958Z,1520566366.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:47.359Z,1520566367.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:47.758Z,1520566367.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:48.151Z,1520566368.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:48.558Z,1520566368.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:48.958Z,1520566368.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:49.358Z,1520566369.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:49.758Z,1520566369.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:50.162Z,1520566370.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:50.553Z,1520566370.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:50.958Z,1520566370.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:51.358Z,1520566371.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:51.744Z,1520566371.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:52.156Z,1520566372.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:52.555Z,1520566372.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:52.956Z,1520566372.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:53.358Z,1520566373.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:53.755Z,1520566373.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:54.155Z,1520566374.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:54.558Z,1520566374.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:54.956Z,1520566374.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:55.358Z,1520566375.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:55.758Z,1520566375.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:56.157Z,1520566376.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:56.555Z,1520566376.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:56.956Z,1520566376.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:57.361Z,1520566377.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:57.763Z,1520566377.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:58.156Z,1520566378.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:58.562Z,1520566378.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:58.967Z,1520566378.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:59.370Z,1520566379.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:32:59.758Z,1520566379.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:00.159Z,1520566380.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:00.570Z,1520566380.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:00.962Z,1520566380.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:04.116Z,1520566384.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:04.226Z,1520566384.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:04.587Z,1520566384.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:04.977Z,1520566384.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:05.386Z,1520566385.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:05.791Z,1520566385.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:06.185Z,1520566386.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:06.584Z,1520566386.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:06.994Z,1520566386.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:07.386Z,1520566387.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:07.783Z,1520566387.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:08.186Z,1520566388.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:08.587Z,1520566388.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:08.982Z,1520566388.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:09.384Z,1520566389.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:09.790Z,1520566389.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:10.183Z,1520566390.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:10.581Z,1520566390.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:10.991Z,1520566390.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:11.390Z,1520566391.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:11.798Z,1520566391.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:12.174Z,1520566392.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:12.578Z,1520566392.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:12.998Z,1520566392.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:13.390Z,1520566393.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:13.774Z,1520566393.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:14.199Z,1520566394.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:14.574Z,1520566394.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:14.975Z,1520566394.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:15.383Z,1520566395.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:15.778Z,1520566395.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:16.176Z,1520566396.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:16.579Z,1520566396.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:16.984Z,1520566396.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:17.385Z,1520566397.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:17.787Z,1520566397.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:18.185Z,1520566398.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:18.620Z,1520566398.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:18.988Z,1520566398.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:19.386Z,1520566399.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:19.786Z,1520566399.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:20.188Z,1520566400.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:20.586Z,1520566400.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:20.989Z,1520566400.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:21.384Z,1520566401.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:21.790Z,1520566401.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:22.187Z,1520566402.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:22.591Z,1520566402.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:22.994Z,1520566402.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:23.391Z,1520566403.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:23.786Z,1520566403.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:24.182Z,1520566404.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:24.583Z,1520566404.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:24.984Z,1520566404.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:25.386Z,1520566405.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:25.775Z,1520566405.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:26.187Z,1520566406.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:26.586Z,1520566406.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:26.975Z,1520566406.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:27.378Z,1520566407.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:27.778Z,1520566407.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:28.188Z,1520566408.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:28.598Z,1520566408.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:28.977Z,1520566408.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:29.374Z,1520566409.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:29.783Z,1520566409.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:30.182Z,1520566410.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:30.575Z,1520566410.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:30.978Z,1520566410.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:31.374Z,1520566411.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:31.775Z,1520566411.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:32.181Z,1520566412.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:32.578Z,1520566412.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:32.975Z,1520566412.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:33.378Z,1520566413.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:33.778Z,1520566413.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:34.175Z,1520566414.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:34.583Z,1520566414.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:34.983Z,1520566414.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:35.379Z,1520566415.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:35.787Z,1520566415.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:36.186Z,1520566416.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:36.583Z,1520566416.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:36.985Z,1520566416.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:37.385Z,1520566417.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:37.785Z,1520566417.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:38.186Z,1520566418.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:38.586Z,1520566418.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:38.978Z,1520566418.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:39.392Z,1520566419.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:39.775Z,1520566419.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:40.194Z,1520566420.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:40.597Z,1520566420.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:40.987Z,1520566420.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:41.387Z,1520566421.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:41.797Z,1520566421.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:42.191Z,1520566422.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:42.575Z,1520566422.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:42.987Z,1520566422.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:43.381Z,1520566423.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:43.773Z,1520566423.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:44.182Z,1520566424.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:44.211Z,1520566424.211 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T03:33:44.211Z,1520566424.211 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 56
2018-03-09T03:33:44.212Z,1520566424.212 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T03:33:44.224Z,1520566424.224 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T03:33:44.582Z,1520566424.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:44.629Z,1520566424.629 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T03:33:44.629Z,1520566424.629 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 56
2018-03-09T03:33:44.973Z,1520566424.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:44.991Z,1520566424.991 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T03:33:44.991Z,1520566424.991 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T03:33:44.991Z,1520566424.991 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T03:33:45.383Z,1520566425.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:45.782Z,1520566425.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:46.183Z,1520566426.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:46.582Z,1520566426.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:46.994Z,1520566426.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:47.379Z,1520566427.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:47.783Z,1520566427.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:48.187Z,1520566428.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:48.586Z,1520566428.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:48.985Z,1520566428.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:49.385Z,1520566429.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:49.783Z,1520566429.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:50.186Z,1520566430.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:50.590Z,1520566430.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:50.987Z,1520566430.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:51.386Z,1520566431.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:51.790Z,1520566431.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:52.183Z,1520566432.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:52.586Z,1520566432.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:52.993Z,1520566432.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:53.390Z,1520566433.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:53.796Z,1520566433.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:54.191Z,1520566434.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:54.574Z,1520566434.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:54.999Z,1520566434.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:55.391Z,1520566435.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:55.791Z,1520566435.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:56.199Z,1520566436.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:56.591Z,1520566436.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:56.986Z,1520566436.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:57.385Z,1520566437.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:57.788Z,1520566437.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:58.188Z,1520566438.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:58.588Z,1520566438.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:58.973Z,1520566438.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:59.387Z,1520566439.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:33:59.801Z,1520566439.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:00.175Z,1520566440.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:00.577Z,1520566440.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:00.978Z,1520566440.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:04.201Z,1520566444.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:04.316Z,1520566444.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:04.708Z,1520566444.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:05.109Z,1520566445.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:05.507Z,1520566445.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:05.907Z,1520566445.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:06.305Z,1520566446.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:06.706Z,1520566446.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:07.108Z,1520566447.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:07.516Z,1520566447.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:07.907Z,1520566447.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:08.308Z,1520566448.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:08.696Z,1520566448.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:09.098Z,1520566449.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:09.499Z,1520566449.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:09.897Z,1520566449.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:10.299Z,1520566450.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:10.699Z,1520566450.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:11.095Z,1520566451.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:11.505Z,1520566451.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:11.907Z,1520566451.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:12.301Z,1520566452.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:12.702Z,1520566452.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:13.105Z,1520566453.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:13.506Z,1520566453.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:13.902Z,1520566453.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:14.314Z,1520566454.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:14.703Z,1520566454.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:15.102Z,1520566455.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:15.515Z,1520566455.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:15.906Z,1520566455.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:16.302Z,1520566456.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:16.715Z,1520566456.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:17.094Z,1520566457.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:17.494Z,1520566457.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:17.910Z,1520566457.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:18.310Z,1520566458.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:18.711Z,1520566458.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:19.106Z,1520566459.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:19.510Z,1520566459.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:19.910Z,1520566459.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:20.307Z,1520566460.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:20.695Z,1520566460.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:21.107Z,1520566461.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:21.507Z,1520566461.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:21.895Z,1520566461.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:22.307Z,1520566462.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:22.720Z,1520566462.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:23.116Z,1520566463.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:23.507Z,1520566463.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:23.906Z,1520566463.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:24.294Z,1520566464.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:24.710Z,1520566464.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:25.106Z,1520566465.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:25.511Z,1520566465.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:25.910Z,1520566465.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:26.306Z,1520566466.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:26.694Z,1520566466.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:27.117Z,1520566467.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:27.510Z,1520566467.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:27.906Z,1520566467.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:28.314Z,1520566468.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:28.705Z,1520566468.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:29.095Z,1520566469.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:29.498Z,1520566469.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:29.898Z,1520566469.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:30.296Z,1520566470.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:30.698Z,1520566470.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:31.106Z,1520566471.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:31.502Z,1520566471.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:31.903Z,1520566471.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:32.303Z,1520566472.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:32.698Z,1520566472.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:33.104Z,1520566473.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:33.506Z,1520566473.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:33.906Z,1520566473.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:34.310Z,1520566474.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:34.715Z,1520566474.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:35.103Z,1520566475.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:35.506Z,1520566475.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:35.915Z,1520566475.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:36.305Z,1520566476.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:36.710Z,1520566476.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:37.105Z,1520566477.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:37.502Z,1520566477.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:37.914Z,1520566477.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:38.311Z,1520566478.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:38.694Z,1520566478.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:39.111Z,1520566479.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:39.507Z,1520566479.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:39.909Z,1520566479.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:40.311Z,1520566480.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:40.718Z,1520566480.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:41.107Z,1520566481.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:41.508Z,1520566481.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:41.920Z,1520566481.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:42.294Z,1520566482.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:42.705Z,1520566482.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:43.118Z,1520566483.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:43.494Z,1520566483.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:43.910Z,1520566483.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:44.301Z,1520566484.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:44.711Z,1520566484.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:45.098Z,1520566485.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:45.502Z,1520566485.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:45.898Z,1520566485.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:46.298Z,1520566486.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:46.703Z,1520566486.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:47.107Z,1520566487.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:47.508Z,1520566487.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:47.903Z,1520566487.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:48.308Z,1520566488.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:48.707Z,1520566488.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:49.116Z,1520566489.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:49.524Z,1520566489.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:49.890Z,1520566489.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:50.298Z,1520566490.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:50.698Z,1520566490.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:51.095Z,1520566491.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:51.502Z,1520566491.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:51.898Z,1520566491.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:52.302Z,1520566492.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:52.701Z,1520566492.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:53.106Z,1520566493.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:53.502Z,1520566493.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:53.903Z,1520566493.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:54.307Z,1520566494.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:54.703Z,1520566494.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:55.114Z,1520566495.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:55.507Z,1520566495.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:55.895Z,1520566495.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:56.318Z,1520566496.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:56.694Z,1520566496.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:57.095Z,1520566497.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:57.498Z,1520566497.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:57.898Z,1520566497.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:58.311Z,1520566498.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:58.698Z,1520566498.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:59.094Z,1520566499.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:59.510Z,1520566499.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:34:59.898Z,1520566499.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:00.294Z,1520566500.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:00.693Z,1520566500.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:01.111Z,1520566501.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:04.376Z,1520566504.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:04.513Z,1520566504.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:04.888Z,1520566504.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:05.299Z,1520566505.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:05.683Z,1520566505.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:06.091Z,1520566506.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:06.489Z,1520566506.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:06.881Z,1520566506.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:07.277Z,1520566507.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:07.674Z,1520566507.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:08.067Z,1520566508.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:08.515Z,1520566508.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:08.874Z,1520566508.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:09.309Z,1520566509.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:09.706Z,1520566509.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:10.099Z,1520566510.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:10.485Z,1520566510.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:10.908Z,1520566510.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:11.314Z,1520566511.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:11.689Z,1520566511.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:12.109Z,1520566512.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:12.487Z,1520566512.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:12.883Z,1520566512.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:13.286Z,1520566513.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:13.688Z,1520566513.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:14.088Z,1520566514.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:14.487Z,1520566514.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:14.875Z,1520566514.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:15.279Z,1520566515.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:15.715Z,1520566515.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:16.070Z,1520566516.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:16.507Z,1520566516.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:16.907Z,1520566516.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:17.282Z,1520566517.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:17.664Z,1520566517.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:18.107Z,1520566518.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:18.479Z,1520566518.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:18.900Z,1520566518.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:19.302Z,1520566519.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:19.710Z,1520566519.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:20.079Z,1520566520.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:20.488Z,1520566520.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:20.884Z,1520566520.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:21.286Z,1520566521.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:21.693Z,1520566521.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:22.082Z,1520566522.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:22.480Z,1520566522.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:22.882Z,1520566522.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:23.329Z,1520566523.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:23.680Z,1520566523.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:24.105Z,1520566524.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:24.467Z,1520566524.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:24.890Z,1520566524.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:25.292Z,1520566525.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:25.666Z,1520566525.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:26.064Z,1520566526.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:26.486Z,1520566526.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:26.886Z,1520566526.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:27.309Z,1520566527.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:27.683Z,1520566527.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:28.082Z,1520566528.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:28.478Z,1520566528.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:28.892Z,1520566528.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:29.291Z,1520566529.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:29.682Z,1520566529.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:30.080Z,1520566530.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:30.482Z,1520566530.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:30.904Z,1520566530.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:31.285Z,1520566531.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:31.723Z,1520566531.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:32.087Z,1520566532.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:32.496Z,1520566532.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:32.892Z,1520566532.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:33.305Z,1520566533.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:33.706Z,1520566533.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:34.065Z,1520566534.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:34.500Z,1520566534.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:34.904Z,1520566534.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:35.292Z,1520566535.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:35.685Z,1520566535.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:36.078Z,1520566536.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:36.496Z,1520566536.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:36.868Z,1520566536.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:37.278Z,1520566537.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:37.683Z,1520566537.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:38.081Z,1520566538.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:38.511Z,1520566538.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:38.866Z,1520566538.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:39.298Z,1520566539.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:39.683Z,1520566539.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:40.086Z,1520566540.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:40.502Z,1520566540.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:40.904Z,1520566540.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:41.285Z,1520566541.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:41.673Z,1520566541.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:42.102Z,1520566542.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:42.506Z,1520566542.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:42.886Z,1520566542.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:43.288Z,1520566543.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:43.683Z,1520566543.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:44.084Z,1520566544.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:44.489Z,1520566544.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:44.881Z,1520566544.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:45.280Z,1520566545.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:45.684Z,1520566545.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:46.116Z,1520566546.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:46.475Z,1520566546.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:46.917Z,1520566546.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:47.319Z,1520566547.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:47.694Z,1520566547.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:48.100Z,1520566548.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:48.505Z,1520566548.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:48.891Z,1520566548.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:49.303Z,1520566549.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:49.693Z,1520566549.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:50.066Z,1520566550.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:50.480Z,1520566550.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:50.885Z,1520566550.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:51.288Z,1520566551.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:51.679Z,1520566551.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:52.079Z,1520566552.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:52.476Z,1520566552.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:52.901Z,1520566552.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:53.278Z,1520566553.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:53.701Z,1520566553.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:54.077Z,1520566554.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:54.499Z,1520566554.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:54.889Z,1520566554.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:55.306Z,1520566555.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:55.685Z,1520566555.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:56.064Z,1520566556.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:56.501Z,1520566556.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:56.907Z,1520566556.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:57.281Z,1520566557.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:57.703Z,1520566557.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:58.081Z,1520566558.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:58.486Z,1520566558.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:58.880Z,1520566558.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:59.279Z,1520566559.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:35:59.667Z,1520566559.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:00.082Z,1520566560.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:00.516Z,1520566560.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:00.872Z,1520566560.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:01.315Z,1520566561.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:04.561Z,1520566564.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:04.672Z,1520566564.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:05.071Z,1520566565.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:05.469Z,1520566565.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:05.871Z,1520566565.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:06.270Z,1520566566.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:06.666Z,1520566566.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:07.070Z,1520566567.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:07.479Z,1520566567.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:07.875Z,1520566567.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:08.270Z,1520566568.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:08.669Z,1520566568.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:09.065Z,1520566569.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:09.466Z,1520566569.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:09.879Z,1520566569.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:10.274Z,1520566570.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:10.669Z,1520566570.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:11.070Z,1520566571.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:11.474Z,1520566571.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:11.867Z,1520566571.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:12.270Z,1520566572.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:12.666Z,1520566572.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:13.054Z,1520566573.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:13.474Z,1520566573.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:13.874Z,1520566573.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:14.271Z,1520566574.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:14.670Z,1520566574.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:15.070Z,1520566575.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:15.475Z,1520566575.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:15.881Z,1520566575.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:16.270Z,1520566576.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:16.658Z,1520566576.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:17.062Z,1520566577.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:17.463Z,1520566577.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:17.859Z,1520566577.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:18.262Z,1520566578.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:18.662Z,1520566578.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:19.059Z,1520566579.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:19.466Z,1520566579.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:19.866Z,1520566579.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:20.266Z,1520566580.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:20.662Z,1520566580.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:21.082Z,1520566581.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:21.466Z,1520566581.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:21.882Z,1520566581.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:22.263Z,1520566582.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:22.658Z,1520566582.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:23.062Z,1520566583.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:23.462Z,1520566583.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:23.859Z,1520566583.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:24.262Z,1520566584.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:24.665Z,1520566584.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:25.060Z,1520566585.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:25.466Z,1520566585.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:25.869Z,1520566585.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:26.271Z,1520566586.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:26.670Z,1520566586.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:27.072Z,1520566587.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:27.466Z,1520566587.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:27.879Z,1520566587.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:28.274Z,1520566588.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:28.670Z,1520566588.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:29.080Z,1520566589.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:29.474Z,1520566589.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:29.868Z,1520566589.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:30.271Z,1520566590.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:30.674Z,1520566590.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:31.058Z,1520566591.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:31.470Z,1520566591.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:31.879Z,1520566591.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:32.271Z,1520566592.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:32.671Z,1520566592.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:33.075Z,1520566593.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:33.458Z,1520566593.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:33.876Z,1520566593.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:34.273Z,1520566594.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:34.662Z,1520566594.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:35.058Z,1520566595.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:35.462Z,1520566595.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:35.862Z,1520566595.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:36.262Z,1520566596.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:36.678Z,1520566596.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:37.062Z,1520566597.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:37.483Z,1520566597.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:37.860Z,1520566597.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:38.259Z,1520566598.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:38.667Z,1520566598.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:39.056Z,1520566599.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:39.458Z,1520566599.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:39.862Z,1520566599.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:40.266Z,1520566600.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:40.671Z,1520566600.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:41.070Z,1520566601.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:41.469Z,1520566601.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:41.869Z,1520566601.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:42.278Z,1520566602.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:42.667Z,1520566602.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:43.070Z,1520566603.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:43.470Z,1520566603.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:43.865Z,1520566603.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:44.270Z,1520566604.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:44.679Z,1520566604.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:45.067Z,1520566605.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:45.085Z,1520566605.085 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T03:36:45.085Z,1520566605.085 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 57
2018-03-09T03:36:45.085Z,1520566605.085 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T03:36:45.098Z,1520566605.098 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T03:36:45.471Z,1520566605.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:45.501Z,1520566605.501 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T03:36:45.501Z,1520566605.501 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 57
2018-03-09T03:36:45.882Z,1520566605.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:45.899Z,1520566605.899 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T03:36:45.899Z,1520566605.899 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T03:36:45.899Z,1520566605.899 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T03:36:46.258Z,1520566606.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:46.658Z,1520566606.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:47.062Z,1520566607.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:47.458Z,1520566607.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:47.858Z,1520566607.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:48.262Z,1520566608.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:48.662Z,1520566608.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:49.062Z,1520566609.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:49.467Z,1520566609.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:49.861Z,1520566609.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:50.268Z,1520566610.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:50.679Z,1520566610.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:51.067Z,1520566611.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:51.470Z,1520566611.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:51.874Z,1520566611.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:52.275Z,1520566612.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:52.674Z,1520566612.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:53.075Z,1520566613.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:53.474Z,1520566613.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:53.870Z,1520566613.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:54.270Z,1520566614.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:54.668Z,1520566614.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:55.079Z,1520566615.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:55.470Z,1520566615.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:55.870Z,1520566615.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:56.270Z,1520566616.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:56.670Z,1520566616.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:57.065Z,1520566617.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:57.470Z,1520566617.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:57.870Z,1520566617.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:58.274Z,1520566618.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:58.674Z,1520566618.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:59.070Z,1520566619.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:59.467Z,1520566619.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:36:59.870Z,1520566619.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:00.265Z,1520566620.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:00.667Z,1520566620.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:00.687Z,1520566620.687 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-09T03:37:00.687Z,1520566620.687 [Default:CheckIn:C.Wait] Stopped
2018-03-09T03:37:00.687Z,1520566620.687 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-09T03:37:00.687Z,1520566620.687 [Default:CheckIn:D] Running Loop=1
2018-03-09T03:37:01.065Z,1520566621.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:01.095Z,1520566621.095 [Default:CheckIn:D] Stopped
2018-03-09T03:37:01.095Z,1520566621.095 [Default:CheckIn:E] Running Loop=1
2018-03-09T03:37:01.465Z,1520566621.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:01.501Z,1520566621.501 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1191.271484 min 
2018-03-09T03:37:01.501Z,1520566621.501 [Default:CheckIn:E] Stopped
2018-03-09T03:37:01.502Z,1520566621.502 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-09T03:37:01.502Z,1520566621.502 [Default:CheckIn] Stopped
2018-03-09T03:37:01.502Z,1520566621.502 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-09T03:37:01.502Z,1520566621.502 [Default:CheckIn](INFO): Running loop #120
2018-03-09T03:37:01.502Z,1520566621.502 [Default:CheckIn] Running Loop=120
2018-03-09T03:37:01.502Z,1520566621.502 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-09T03:37:01.502Z,1520566621.502 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-09T03:37:04.752Z,1520566624.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:04.854Z,1520566624.854 [NAL9602](INFO): Powering up
2018-03-09T03:37:04.906Z,1520566624.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:05.243Z,1520566625.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:05.640Z,1520566625.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:06.051Z,1520566626.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:06.446Z,1520566626.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:06.846Z,1520566626.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:07.246Z,1520566627.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:07.634Z,1520566627.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:08.031Z,1520566628.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:08.434Z,1520566628.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:08.834Z,1520566628.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:09.230Z,1520566629.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:09.640Z,1520566629.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:10.034Z,1520566630.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:10.431Z,1520566630.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:10.834Z,1520566630.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:11.239Z,1520566631.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:11.633Z,1520566631.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:12.041Z,1520566632.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:12.435Z,1520566632.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:12.827Z,1520566632.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:13.238Z,1520566633.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:13.638Z,1520566633.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:14.031Z,1520566634.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:14.434Z,1520566634.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:14.838Z,1520566634.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:15.232Z,1520566635.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:15.657Z,1520566635.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:16.018Z,1520566636.018 [NAL9602](INFO): NAL9602 initialized
2018-03-09T03:37:16.035Z,1520566636.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:16.430Z,1520566636.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:16.860Z,1520566636.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:17.266Z,1520566637.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:17.641Z,1520566637.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:18.039Z,1520566638.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:18.438Z,1520566638.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:18.835Z,1520566638.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:19.240Z,1520566639.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:19.639Z,1520566639.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:20.042Z,1520566640.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:20.444Z,1520566640.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:20.840Z,1520566640.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:21.238Z,1520566641.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:21.639Z,1520566641.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:22.043Z,1520566642.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:22.430Z,1520566642.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:22.848Z,1520566642.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:23.247Z,1520566643.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:23.634Z,1520566643.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:24.039Z,1520566644.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:24.435Z,1520566644.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:24.833Z,1520566644.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:25.243Z,1520566645.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:25.642Z,1520566645.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:26.042Z,1520566646.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:26.443Z,1520566646.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:26.844Z,1520566646.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:27.240Z,1520566647.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:27.639Z,1520566647.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:28.048Z,1520566648.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:28.429Z,1520566648.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:28.836Z,1520566648.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:29.239Z,1520566649.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:29.629Z,1520566649.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:30.039Z,1520566650.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:30.434Z,1520566650.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:30.834Z,1520566650.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:31.235Z,1520566651.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:31.646Z,1520566651.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:32.035Z,1520566652.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:32.435Z,1520566652.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:32.847Z,1520566652.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:33.244Z,1520566653.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:33.641Z,1520566653.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:34.035Z,1520566654.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:34.438Z,1520566654.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:34.828Z,1520566654.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:35.235Z,1520566655.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:35.639Z,1520566655.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:36.032Z,1520566656.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:36.435Z,1520566656.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:36.833Z,1520566656.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:37.235Z,1520566657.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:37.646Z,1520566657.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:38.042Z,1520566658.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:38.448Z,1520566658.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:38.834Z,1520566658.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:39.234Z,1520566659.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:39.635Z,1520566659.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:40.043Z,1520566660.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:40.444Z,1520566660.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:40.839Z,1520566660.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:41.241Z,1520566661.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:41.638Z,1520566661.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:42.028Z,1520566662.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:42.447Z,1520566662.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:42.839Z,1520566662.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:43.240Z,1520566663.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:43.638Z,1520566663.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:44.042Z,1520566664.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:44.435Z,1520566664.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:44.840Z,1520566664.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:45.242Z,1520566665.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:45.643Z,1520566665.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:46.037Z,1520566666.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:46.430Z,1520566666.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:46.834Z,1520566666.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:47.247Z,1520566667.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:47.626Z,1520566667.626 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-09T03:37:47.700Z,1520566667.700 [NAL9602](FAULT): received: 
+CSQ:0

OK12, 2, 0, 0, 0

OK
2018-03-09T03:37:47.701Z,1520566667.701 [NAL9602] Data Fault, FailCount= 2
2018-03-09T03:37:47.701Z,1520566667.701 [NAL9602](ERROR): Data Fault
2018-03-09T03:37:47.733Z,1520566667.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:47.798Z,1520566667.798 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-09T03:37:48.015Z,1520566668.015 [NAL9602](INFO): Powering down
2018-03-09T03:37:48.043Z,1520566668.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:48.440Z,1520566668.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:48.830Z,1520566668.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:48.886Z,1520566668.886 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-09T03:37:48.886Z,1520566668.886 [NAL9602] No Fault, FailCount= 2
2018-03-09T03:37:49.230Z,1520566669.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:49.638Z,1520566669.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:50.039Z,1520566670.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:50.431Z,1520566670.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:50.834Z,1520566670.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:51.239Z,1520566671.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:51.631Z,1520566671.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:52.039Z,1520566672.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:52.434Z,1520566672.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:52.839Z,1520566672.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:53.240Z,1520566673.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:53.638Z,1520566673.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:54.034Z,1520566674.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:54.434Z,1520566674.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:54.831Z,1520566674.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:55.234Z,1520566675.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:55.638Z,1520566675.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:56.038Z,1520566676.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:56.434Z,1520566676.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:56.839Z,1520566676.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:57.246Z,1520566677.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:57.635Z,1520566677.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:58.043Z,1520566678.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:58.438Z,1520566678.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:58.838Z,1520566678.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:59.237Z,1520566679.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:37:59.643Z,1520566679.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:00.030Z,1520566680.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:00.437Z,1520566680.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:00.830Z,1520566680.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:01.242Z,1520566681.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:01.656Z,1520566681.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:04.963Z,1520566684.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:05.068Z,1520566685.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:05.478Z,1520566685.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:05.877Z,1520566685.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:06.278Z,1520566686.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:06.675Z,1520566686.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:07.074Z,1520566687.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:07.474Z,1520566687.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:07.875Z,1520566687.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:08.278Z,1520566688.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:08.673Z,1520566688.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:09.078Z,1520566689.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:09.478Z,1520566689.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:09.875Z,1520566689.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:10.287Z,1520566690.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:10.674Z,1520566690.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:11.074Z,1520566691.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:11.488Z,1520566691.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:11.882Z,1520566691.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:12.282Z,1520566692.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:12.675Z,1520566692.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:13.082Z,1520566693.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:13.483Z,1520566693.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:13.879Z,1520566693.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:14.278Z,1520566694.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:14.674Z,1520566694.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:15.091Z,1520566695.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:15.466Z,1520566695.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:15.879Z,1520566695.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:16.283Z,1520566696.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:16.666Z,1520566696.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:17.066Z,1520566697.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:17.490Z,1520566697.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:17.866Z,1520566697.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:18.258Z,1520566698.258 [NAL9602](INFO): Powering up NAL9602
2018-03-09T03:38:18.289Z,1520566698.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:18.673Z,1520566698.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:19.082Z,1520566699.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:19.482Z,1520566699.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:19.869Z,1520566699.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:20.266Z,1520566700.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:20.663Z,1520566700.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:21.074Z,1520566701.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:21.466Z,1520566701.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:21.870Z,1520566701.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:22.269Z,1520566702.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:22.670Z,1520566702.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:23.067Z,1520566703.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:23.470Z,1520566703.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:23.870Z,1520566703.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:24.266Z,1520566704.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:24.669Z,1520566704.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:25.070Z,1520566705.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:25.474Z,1520566705.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:25.870Z,1520566705.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:26.274Z,1520566706.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:26.668Z,1520566706.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:27.071Z,1520566707.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:27.474Z,1520566707.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:27.869Z,1520566707.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:28.277Z,1520566708.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:28.682Z,1520566708.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:29.064Z,1520566709.064 [NAL9602](INFO): NAL9602 initialized
2018-03-09T03:38:29.081Z,1520566709.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:29.483Z,1520566709.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:29.900Z,1520566709.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:30.290Z,1520566710.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:30.688Z,1520566710.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:31.090Z,1520566711.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:31.477Z,1520566711.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:31.889Z,1520566711.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:32.294Z,1520566712.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:32.685Z,1520566712.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:33.071Z,1520566713.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:33.475Z,1520566713.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:33.869Z,1520566713.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:34.271Z,1520566714.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:34.667Z,1520566714.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:35.068Z,1520566715.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:35.475Z,1520566715.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:35.874Z,1520566715.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:36.279Z,1520566716.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:36.702Z,1520566716.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:37.097Z,1520566717.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:37.481Z,1520566717.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:37.884Z,1520566717.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:38.279Z,1520566718.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:38.675Z,1520566718.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:39.078Z,1520566719.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:39.480Z,1520566719.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:39.869Z,1520566719.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:40.277Z,1520566720.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:40.683Z,1520566720.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:41.068Z,1520566721.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:41.492Z,1520566721.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:41.893Z,1520566721.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:42.290Z,1520566722.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:42.687Z,1520566722.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:43.090Z,1520566723.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:43.470Z,1520566723.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:43.870Z,1520566723.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:44.291Z,1520566724.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:44.666Z,1520566724.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:45.070Z,1520566725.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:45.469Z,1520566725.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:45.864Z,1520566725.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:46.271Z,1520566726.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:46.674Z,1520566726.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:47.080Z,1520566727.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:47.485Z,1520566727.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:47.885Z,1520566727.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:48.281Z,1520566728.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:48.678Z,1520566728.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:49.075Z,1520566729.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:49.479Z,1520566729.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:49.886Z,1520566729.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:50.279Z,1520566730.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:50.676Z,1520566730.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:51.088Z,1520566731.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:51.479Z,1520566731.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:51.883Z,1520566731.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:52.284Z,1520566732.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:52.689Z,1520566732.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:53.085Z,1520566733.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:53.493Z,1520566733.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:53.879Z,1520566733.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:54.281Z,1520566734.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:54.673Z,1520566734.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:55.084Z,1520566735.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:55.481Z,1520566735.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:55.870Z,1520566735.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:56.270Z,1520566736.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:56.670Z,1520566736.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:57.096Z,1520566737.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:57.489Z,1520566737.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:57.871Z,1520566737.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:58.289Z,1520566738.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:58.670Z,1520566738.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:59.070Z,1520566739.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:59.487Z,1520566739.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:38:59.892Z,1520566739.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:00.289Z,1520566740.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:00.698Z,1520566740.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:01.071Z,1520566741.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:01.470Z,1520566741.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:01.870Z,1520566741.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:06.101Z,1520566746.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:06.225Z,1520566746.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:06.610Z,1520566746.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:07.014Z,1520566747.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:07.410Z,1520566747.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:07.806Z,1520566747.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:08.203Z,1520566748.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:08.605Z,1520566748.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:09.015Z,1520566749.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:09.404Z,1520566749.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:09.806Z,1520566749.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:10.206Z,1520566750.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:10.607Z,1520566750.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:11.018Z,1520566751.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:11.417Z,1520566751.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:11.822Z,1520566751.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:12.221Z,1520566752.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:12.598Z,1520566752.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:12.998Z,1520566752.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:13.402Z,1520566753.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:13.800Z,1520566753.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:14.195Z,1520566754.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:14.602Z,1520566754.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:14.998Z,1520566754.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:15.398Z,1520566755.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:15.823Z,1520566755.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:16.218Z,1520566756.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:16.598Z,1520566756.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:17.022Z,1520566757.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:17.428Z,1520566757.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:17.794Z,1520566757.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:18.218Z,1520566758.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:18.598Z,1520566758.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:18.998Z,1520566758.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:19.398Z,1520566759.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:19.819Z,1520566759.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:20.194Z,1520566760.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:20.603Z,1520566760.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:20.000Z,1520566761.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:21.394Z,1520566761.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:21.798Z,1520566761.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:22.198Z,1520566762.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:22.598Z,1520566762.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:22.998Z,1520566762.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:23.400Z,1520566763.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:23.826Z,1520566763.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:24.225Z,1520566764.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:24.618Z,1520566764.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:24.998Z,1520566764.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:25.418Z,1520566765.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:25.828Z,1520566765.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:26.202Z,1520566766.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:26.598Z,1520566766.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:26.998Z,1520566766.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:27.394Z,1520566767.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:27.802Z,1520566767.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:28.198Z,1520566768.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:28.602Z,1520566768.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:29.001Z,1520566769.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:29.397Z,1520566769.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:29.805Z,1520566769.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:30.230Z,1520566770.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:30.602Z,1520566770.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:30.998Z,1520566770.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:31.402Z,1520566771.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:31.798Z,1520566771.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:32.198Z,1520566772.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:32.598Z,1520566772.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:33.007Z,1520566773.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:33.403Z,1520566773.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:33.810Z,1520566773.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:34.217Z,1520566774.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:34.621Z,1520566774.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:35.018Z,1520566775.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:35.421Z,1520566775.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:35.804Z,1520566775.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:36.204Z,1520566776.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:36.606Z,1520566776.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:37.008Z,1520566777.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:37.408Z,1520566777.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:37.812Z,1520566777.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:38.208Z,1520566778.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:38.604Z,1520566778.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:39.021Z,1520566779.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:39.418Z,1520566779.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:39.819Z,1520566779.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:40.217Z,1520566780.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:40.599Z,1520566780.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:40.993Z,1520566780.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:41.398Z,1520566781.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:41.798Z,1520566781.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:42.196Z,1520566782.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:42.606Z,1520566782.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:43.006Z,1520566783.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:43.406Z,1520566783.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:43.826Z,1520566783.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:44.221Z,1520566784.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:44.617Z,1520566784.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:45.025Z,1520566785.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:45.407Z,1520566785.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:45.804Z,1520566785.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:46.206Z,1520566786.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:46.225Z,1520566786.225 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T03:39:46.225Z,1520566786.225 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 58
2018-03-09T03:39:46.225Z,1520566786.225 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T03:39:46.249Z,1520566786.249 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T03:39:46.608Z,1520566786.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:46.636Z,1520566786.636 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T03:39:46.636Z,1520566786.636 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 58
2018-03-09T03:39:46.997Z,1520566786.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:47.031Z,1520566787.031 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T03:39:47.032Z,1520566787.032 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T03:39:47.032Z,1520566787.032 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T03:39:47.401Z,1520566787.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:47.811Z,1520566787.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:48.192Z,1520566788.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:48.601Z,1520566788.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:49.021Z,1520566789.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:49.421Z,1520566789.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:49.822Z,1520566789.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:50.215Z,1520566790.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:50.598Z,1520566790.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:50.998Z,1520566790.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:51.399Z,1520566791.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:51.798Z,1520566791.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:52.218Z,1520566792.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:52.619Z,1520566792.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:52.998Z,1520566792.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:53.419Z,1520566793.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:53.819Z,1520566793.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:54.222Z,1520566794.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:54.617Z,1520566794.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:55.017Z,1520566795.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:55.421Z,1520566795.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:55.798Z,1520566795.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:56.221Z,1520566796.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:56.596Z,1520566796.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:57.001Z,1520566797.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:57.416Z,1520566797.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:57.806Z,1520566797.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:58.216Z,1520566798.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:58.611Z,1520566798.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:58.992Z,1520566798.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:59.409Z,1520566799.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:39:59.809Z,1520566799.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:00.205Z,1520566800.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:00.618Z,1520566800.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:01.002Z,1520566801.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:01.417Z,1520566801.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:01.798Z,1520566801.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:02.195Z,1520566802.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:05.557Z,1520566805.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:05.703Z,1520566805.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:06.043Z,1520566806.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:06.440Z,1520566806.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:06.840Z,1520566806.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:07.243Z,1520566807.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:07.639Z,1520566807.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:08.033Z,1520566808.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:08.434Z,1520566808.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:08.834Z,1520566808.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:09.242Z,1520566809.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:09.644Z,1520566809.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:10.037Z,1520566810.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:10.433Z,1520566810.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:10.847Z,1520566810.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:11.230Z,1520566811.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:11.647Z,1520566811.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:12.055Z,1520566812.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:12.430Z,1520566812.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:12.835Z,1520566812.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:13.242Z,1520566813.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:13.639Z,1520566813.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:14.036Z,1520566814.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:14.449Z,1520566814.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:14.848Z,1520566814.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:15.242Z,1520566815.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:15.642Z,1520566815.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:16.039Z,1520566816.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:16.444Z,1520566816.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:16.846Z,1520566816.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:17.240Z,1520566817.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:17.638Z,1520566817.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:18.042Z,1520566818.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:18.443Z,1520566818.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:18.854Z,1520566818.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:19.257Z,1520566819.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:19.647Z,1520566819.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:20.046Z,1520566820.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:20.438Z,1520566820.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:20.830Z,1520566820.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:21.246Z,1520566821.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:21.639Z,1520566821.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:22.041Z,1520566822.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:22.443Z,1520566822.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:22.843Z,1520566822.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:23.247Z,1520566823.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:23.638Z,1520566823.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:24.038Z,1520566824.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:24.434Z,1520566824.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:24.834Z,1520566824.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:25.251Z,1520566825.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:25.630Z,1520566825.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:26.042Z,1520566826.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:26.439Z,1520566826.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:26.843Z,1520566826.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:27.246Z,1520566827.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:27.666Z,1520566827.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:28.038Z,1520566828.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:28.438Z,1520566828.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:28.834Z,1520566828.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:29.238Z,1520566829.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:29.639Z,1520566829.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:30.046Z,1520566830.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:30.439Z,1520566830.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:30.840Z,1520566830.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:31.245Z,1520566831.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:31.657Z,1520566831.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:32.054Z,1520566832.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:32.434Z,1520566832.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:32.834Z,1520566832.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:33.264Z,1520566833.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:33.638Z,1520566833.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:34.035Z,1520566834.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:34.435Z,1520566834.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:34.846Z,1520566834.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:35.242Z,1520566835.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:35.643Z,1520566835.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:36.054Z,1520566836.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:36.453Z,1520566836.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:36.843Z,1520566836.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:37.247Z,1520566837.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:37.642Z,1520566837.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:38.036Z,1520566838.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:38.440Z,1520566838.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:38.845Z,1520566838.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:39.238Z,1520566839.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:39.650Z,1520566839.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:40.034Z,1520566840.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:40.452Z,1520566840.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:40.854Z,1520566840.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:41.230Z,1520566841.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:41.634Z,1520566841.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:42.038Z,1520566842.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:42.434Z,1520566842.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:42.828Z,1520566842.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:43.234Z,1520566843.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:43.642Z,1520566843.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:44.035Z,1520566844.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:44.450Z,1520566844.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:44.843Z,1520566844.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:45.232Z,1520566845.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:45.638Z,1520566845.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:46.034Z,1520566846.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:46.438Z,1520566846.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:46.834Z,1520566846.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:47.235Z,1520566847.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:47.632Z,1520566847.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:48.034Z,1520566848.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:48.438Z,1520566848.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:48.844Z,1520566848.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:49.275Z,1520566849.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:49.642Z,1520566849.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:50.032Z,1520566850.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:50.442Z,1520566850.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:50.842Z,1520566850.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:51.239Z,1520566851.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:51.634Z,1520566851.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:52.038Z,1520566852.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:52.438Z,1520566852.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:52.838Z,1520566852.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:53.249Z,1520566853.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:53.641Z,1520566853.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:54.035Z,1520566854.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:54.442Z,1520566854.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:54.831Z,1520566854.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:55.243Z,1520566855.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:55.642Z,1520566855.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:56.041Z,1520566856.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:56.441Z,1520566856.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:56.835Z,1520566856.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:57.232Z,1520566857.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:57.645Z,1520566857.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:58.063Z,1520566858.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:58.460Z,1520566858.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:58.850Z,1520566858.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:59.239Z,1520566859.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:40:59.634Z,1520566859.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:00.043Z,1520566860.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:00.447Z,1520566860.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:00.830Z,1520566860.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:01.238Z,1520566861.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:01.635Z,1520566861.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:02.030Z,1520566862.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:02.454Z,1520566862.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:05.721Z,1520566865.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:05.845Z,1520566865.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:06.249Z,1520566866.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:06.631Z,1520566866.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:07.028Z,1520566867.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:07.435Z,1520566867.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:07.834Z,1520566867.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:08.236Z,1520566868.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:08.632Z,1520566868.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:09.039Z,1520566869.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:09.439Z,1520566869.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:09.834Z,1520566869.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:10.245Z,1520566870.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:10.642Z,1520566870.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:11.045Z,1520566871.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:11.449Z,1520566871.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:11.835Z,1520566871.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:12.239Z,1520566872.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:12.636Z,1520566872.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:13.033Z,1520566873.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:13.435Z,1520566873.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:13.847Z,1520566873.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:14.230Z,1520566874.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:14.647Z,1520566874.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:15.033Z,1520566875.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:15.449Z,1520566875.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:15.846Z,1520566875.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:16.251Z,1520566876.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:16.641Z,1520566876.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:17.030Z,1520566877.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:17.426Z,1520566877.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:17.826Z,1520566877.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:18.226Z,1520566878.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:18.626Z,1520566878.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:19.027Z,1520566879.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:19.426Z,1520566879.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:19.826Z,1520566879.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:20.226Z,1520566880.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:20.640Z,1520566880.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:21.047Z,1520566881.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:21.449Z,1520566881.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:21.850Z,1520566881.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:22.226Z,1520566882.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:22.624Z,1520566882.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:23.026Z,1520566883.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:23.426Z,1520566883.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:23.828Z,1520566883.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:24.238Z,1520566884.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:24.631Z,1520566884.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:25.028Z,1520566885.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:25.434Z,1520566885.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:25.841Z,1520566885.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:26.241Z,1520566886.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:26.645Z,1520566886.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:27.044Z,1520566887.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:27.438Z,1520566887.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:27.834Z,1520566887.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:28.235Z,1520566888.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:28.624Z,1520566888.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:29.026Z,1520566889.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:29.426Z,1520566889.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:29.824Z,1520566889.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:30.226Z,1520566890.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:30.626Z,1520566890.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:31.037Z,1520566891.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:31.458Z,1520566891.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:31.851Z,1520566891.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:32.237Z,1520566892.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:32.631Z,1520566892.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:33.027Z,1520566893.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:33.427Z,1520566893.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:33.826Z,1520566893.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:34.226Z,1520566894.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:34.624Z,1520566894.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:35.034Z,1520566895.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:35.431Z,1520566895.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:35.828Z,1520566895.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:36.249Z,1520566896.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:36.641Z,1520566896.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:37.038Z,1520566897.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:37.440Z,1520566897.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:37.835Z,1520566897.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:38.239Z,1520566898.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:38.638Z,1520566898.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:39.036Z,1520566899.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:39.433Z,1520566899.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:39.833Z,1520566899.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:40.237Z,1520566900.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:40.633Z,1520566900.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:41.033Z,1520566901.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:41.453Z,1520566901.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:41.841Z,1520566901.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:42.240Z,1520566902.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:42.645Z,1520566902.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:43.027Z,1520566903.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:43.426Z,1520566903.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:43.822Z,1520566903.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:44.239Z,1520566904.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:44.626Z,1520566904.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:45.027Z,1520566905.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:45.424Z,1520566905.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:45.826Z,1520566905.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:46.226Z,1520566906.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:46.641Z,1520566906.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:47.045Z,1520566907.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:47.449Z,1520566907.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:47.845Z,1520566907.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:48.226Z,1520566908.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:48.622Z,1520566908.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:49.024Z,1520566909.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:49.430Z,1520566909.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:49.823Z,1520566909.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:50.224Z,1520566910.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:50.630Z,1520566910.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:51.026Z,1520566911.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:51.431Z,1520566911.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:51.850Z,1520566911.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:52.249Z,1520566912.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:52.637Z,1520566912.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:53.053Z,1520566913.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:53.441Z,1520566913.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:53.828Z,1520566913.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:54.234Z,1520566914.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:54.635Z,1520566914.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:55.031Z,1520566915.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:55.434Z,1520566915.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:55.834Z,1520566915.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:56.230Z,1520566916.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:56.633Z,1520566916.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:57.041Z,1520566917.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:57.449Z,1520566917.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:57.841Z,1520566917.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:58.245Z,1520566918.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:58.633Z,1520566918.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:59.029Z,1520566919.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:59.436Z,1520566919.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:41:59.822Z,1520566919.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:00.229Z,1520566920.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:00.627Z,1520566920.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:01.027Z,1520566921.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:01.443Z,1520566921.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:01.847Z,1520566921.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:01.872Z,1520566921.872 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-09T03:37:01.5Z
2018-03-09T03:42:01.872Z,1520566921.872 [Default:CheckIn:Read_GPS] Stopped
2018-03-09T03:42:01.872Z,1520566921.872 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-09T03:42:02.240Z,1520566922.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:02.753Z,1520566922.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:05.820Z,1520566925.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:05.966Z,1520566925.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:06.296Z,1520566926.296 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0480.lzma
2018-03-09T03:42:06.323Z,1520566926.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:06.710Z,1520566926.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:07.084Z,1520566927.084 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0480.lzma.bak
2018-03-09T03:42:07.084Z,1520566927.084 [DataOverHttps](INFO): SBD MOMSN=7991942
2018-03-09T03:42:07.118Z,1520566927.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:07.764Z,1520566927.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:07.920Z,1520566927.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:08.320Z,1520566928.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:13.091Z,1520566933.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:13.138Z,1520566933.138 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-09T03:42:13.243Z,1520566933.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:13.603Z,1520566933.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:13.995Z,1520566933.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:14.384Z,1520566934.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:14.780Z,1520566934.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:15.193Z,1520566935.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:19.660Z,1520566939.660 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-09T03:42:19.679Z,1520566939.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:19.796Z,1520566939.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:20.191Z,1520566940.191 [DataOverHttps](INFO): Sending 236 bytes from file Logs/20180308T074127/Express0481.lzma
2018-03-09T03:42:20.230Z,1520566940.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:20.599Z,1520566940.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:20.980Z,1520566940.980 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0481.lzma.bak
2018-03-09T03:42:20.980Z,1520566940.980 [DataOverHttps](INFO): SBD MOMSN=7991944
2018-03-09T03:42:21.006Z,1520566941.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:24.770Z,1520566944.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:24.790Z,1520566944.790 [Default:CheckIn:Read_Iridium] Stopped
2018-03-09T03:42:24.790Z,1520566944.790 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-09T03:42:24.790Z,1520566944.790 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-09T03:42:24.891Z,1520566944.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:25.238Z,1520566945.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:28.661Z,1520566948.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:28.772Z,1520566948.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:29.134Z,1520566949.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:29.531Z,1520566949.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:29.935Z,1520566949.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:30.342Z,1520566950.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:30.732Z,1520566950.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:31.130Z,1520566951.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:31.534Z,1520566951.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:31.930Z,1520566951.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:32.337Z,1520566952.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:32.734Z,1520566952.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:33.136Z,1520566953.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:33.538Z,1520566953.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:33.946Z,1520566953.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:34.326Z,1520566954.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:34.746Z,1520566954.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:35.145Z,1520566955.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:35.524Z,1520566955.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:35.926Z,1520566955.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:36.326Z,1520566956.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:36.723Z,1520566956.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:37.127Z,1520566957.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:37.526Z,1520566957.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:37.923Z,1520566957.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:38.330Z,1520566958.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:38.726Z,1520566958.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:39.123Z,1520566959.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:39.527Z,1520566959.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:39.930Z,1520566959.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:40.331Z,1520566960.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:40.726Z,1520566960.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:41.126Z,1520566961.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:41.526Z,1520566961.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:41.926Z,1520566961.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:42.329Z,1520566962.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:42.726Z,1520566962.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:43.132Z,1520566963.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:43.534Z,1520566963.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:43.929Z,1520566963.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:44.332Z,1520566964.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:44.732Z,1520566964.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:45.132Z,1520566965.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:45.531Z,1520566965.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:45.932Z,1520566965.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:46.338Z,1520566966.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:46.739Z,1520566966.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:47.127Z,1520566967.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:47.163Z,1520566967.163 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T03:42:47.163Z,1520566967.163 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 59
2018-03-09T03:42:47.163Z,1520566967.163 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T03:42:47.175Z,1520566967.175 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T03:42:47.526Z,1520566967.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:47.577Z,1520566967.577 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T03:42:47.577Z,1520566967.577 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 59
2018-03-09T03:42:47.930Z,1520566967.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:47.960Z,1520566967.960 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T03:42:47.960Z,1520566967.960 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T03:42:47.961Z,1520566967.961 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T03:42:48.347Z,1520566968.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:48.722Z,1520566968.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:49.123Z,1520566969.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:49.526Z,1520566969.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:49.910Z,1520566969.910 [NAL9602](INFO): Powering down
2018-03-09T03:42:49.930Z,1520566969.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:50.327Z,1520566970.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:50.726Z,1520566970.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:51.122Z,1520566971.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:51.531Z,1520566971.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:51.926Z,1520566971.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:52.326Z,1520566972.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:52.724Z,1520566972.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:53.134Z,1520566973.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:53.534Z,1520566973.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:53.930Z,1520566973.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:54.342Z,1520566974.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:54.733Z,1520566974.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:55.135Z,1520566975.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:55.543Z,1520566975.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:55.927Z,1520566975.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:56.338Z,1520566976.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:56.744Z,1520566976.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:57.129Z,1520566977.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:57.532Z,1520566977.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:57.928Z,1520566977.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:58.330Z,1520566978.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:58.730Z,1520566978.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:59.129Z,1520566979.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:59.538Z,1520566979.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:42:59.931Z,1520566979.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:00.334Z,1520566980.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:00.729Z,1520566980.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:01.126Z,1520566981.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:01.529Z,1520566981.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:01.926Z,1520566981.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:02.330Z,1520566982.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:02.730Z,1520566982.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:03.126Z,1520566983.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:03.528Z,1520566983.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:03.926Z,1520566983.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:04.326Z,1520566984.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:04.740Z,1520566984.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:05.125Z,1520566985.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:05.528Z,1520566985.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:05.923Z,1520566985.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:06.332Z,1520566986.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:06.729Z,1520566986.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:07.134Z,1520566987.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:07.534Z,1520566987.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:07.934Z,1520566987.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:08.333Z,1520566988.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:08.742Z,1520566988.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:09.134Z,1520566989.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:09.540Z,1520566989.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:09.943Z,1520566989.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:10.343Z,1520566990.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:10.732Z,1520566990.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:11.126Z,1520566991.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:11.534Z,1520566991.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:11.927Z,1520566991.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:12.334Z,1520566992.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:12.735Z,1520566992.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:13.132Z,1520566993.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:13.530Z,1520566993.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:13.938Z,1520566993.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:14.330Z,1520566994.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:14.739Z,1520566994.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:15.137Z,1520566995.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:15.534Z,1520566995.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:15.944Z,1520566995.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:16.336Z,1520566996.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:16.729Z,1520566996.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:17.149Z,1520566997.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:17.522Z,1520566997.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:17.935Z,1520566997.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:18.348Z,1520566998.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:18.738Z,1520566998.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:19.123Z,1520566999.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:19.526Z,1520566999.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:19.926Z,1520566999.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:20.326Z,1520567000.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:20.734Z,1520567000.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:21.122Z,1520567001.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:21.526Z,1520567001.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:21.926Z,1520567001.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:22.326Z,1520567002.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:22.722Z,1520567002.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:23.138Z,1520567003.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:23.526Z,1520567003.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:23.922Z,1520567003.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:24.326Z,1520567004.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:24.731Z,1520567004.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:25.127Z,1520567005.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:25.533Z,1520567005.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:28.721Z,1520567008.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:28.833Z,1520567008.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:29.195Z,1520567009.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:29.581Z,1520567009.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:29.982Z,1520567009.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:30.382Z,1520567010.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:30.782Z,1520567010.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:31.183Z,1520567011.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:31.594Z,1520567011.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:31.987Z,1520567011.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:32.390Z,1520567012.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:32.786Z,1520567012.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:33.189Z,1520567013.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:33.593Z,1520567013.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:33.991Z,1520567013.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:34.390Z,1520567014.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:34.791Z,1520567014.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:35.182Z,1520567015.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:35.582Z,1520567015.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:35.990Z,1520567015.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:36.394Z,1520567016.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:36.788Z,1520567016.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:37.192Z,1520567017.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:37.589Z,1520567017.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:37.982Z,1520567017.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:38.382Z,1520567018.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:38.782Z,1520567018.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:39.187Z,1520567019.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:39.590Z,1520567019.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:39.990Z,1520567019.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:40.386Z,1520567020.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:40.785Z,1520567020.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:41.183Z,1520567021.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:41.586Z,1520567021.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:41.990Z,1520567021.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:42.389Z,1520567022.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:42.782Z,1520567022.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:43.183Z,1520567023.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:43.587Z,1520567023.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:43.994Z,1520567023.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:44.383Z,1520567024.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:44.794Z,1520567024.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:45.190Z,1520567025.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:45.586Z,1520567025.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:45.983Z,1520567025.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:46.386Z,1520567026.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:46.783Z,1520567026.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:47.186Z,1520567027.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:47.591Z,1520567027.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:47.984Z,1520567027.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:48.386Z,1520567028.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:48.791Z,1520567028.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:49.187Z,1520567029.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:49.582Z,1520567029.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:49.986Z,1520567029.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:50.386Z,1520567030.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:50.787Z,1520567030.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:51.186Z,1520567031.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:51.590Z,1520567031.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:51.989Z,1520567031.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:52.391Z,1520567032.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:52.789Z,1520567032.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:53.189Z,1520567033.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:53.591Z,1520567033.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:53.978Z,1520567033.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:54.382Z,1520567034.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:54.783Z,1520567034.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:55.179Z,1520567035.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:55.582Z,1520567035.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:55.985Z,1520567035.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:56.387Z,1520567036.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:56.791Z,1520567036.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:57.191Z,1520567037.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:57.586Z,1520567037.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:57.994Z,1520567037.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:58.383Z,1520567038.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:58.780Z,1520567038.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:59.187Z,1520567039.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:59.592Z,1520567039.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:43:59.987Z,1520567039.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:00.390Z,1520567040.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:00.782Z,1520567040.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:01.180Z,1520567041.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:01.581Z,1520567041.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:01.981Z,1520567041.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:02.382Z,1520567042.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:02.782Z,1520567042.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:03.195Z,1520567043.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:03.582Z,1520567043.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:03.994Z,1520567043.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:04.388Z,1520567044.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:04.790Z,1520567044.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:05.189Z,1520567045.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:05.588Z,1520567045.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:05.988Z,1520567045.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:06.394Z,1520567046.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:06.790Z,1520567046.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:07.191Z,1520567047.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:07.582Z,1520567047.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:07.982Z,1520567047.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:08.382Z,1520567048.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:08.782Z,1520567048.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:09.191Z,1520567049.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:09.587Z,1520567049.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:09.998Z,1520567049.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:10.394Z,1520567050.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:10.788Z,1520567050.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:11.193Z,1520567051.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:11.587Z,1520567051.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:11.991Z,1520567051.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:12.388Z,1520567052.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:12.783Z,1520567052.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:13.187Z,1520567053.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:13.590Z,1520567053.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:13.988Z,1520567053.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:14.389Z,1520567054.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:14.789Z,1520567054.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:15.190Z,1520567055.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:15.590Z,1520567055.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:15.993Z,1520567055.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:16.390Z,1520567056.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:16.782Z,1520567056.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:17.182Z,1520567057.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:17.582Z,1520567057.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:17.982Z,1520567057.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:18.398Z,1520567058.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:18.782Z,1520567058.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:19.187Z,1520567059.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:19.594Z,1520567059.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:19.986Z,1520567059.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:20.389Z,1520567060.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:20.791Z,1520567060.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:21.187Z,1520567061.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:21.591Z,1520567061.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:21.990Z,1520567061.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:22.393Z,1520567062.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:22.787Z,1520567062.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:23.187Z,1520567063.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:23.589Z,1520567063.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:23.987Z,1520567063.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:24.409Z,1520567064.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:24.782Z,1520567064.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:25.182Z,1520567065.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:25.590Z,1520567065.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:28.755Z,1520567068.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:28.882Z,1520567068.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:29.243Z,1520567069.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:29.639Z,1520567069.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:30.041Z,1520567070.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:30.450Z,1520567070.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:30.839Z,1520567070.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:31.241Z,1520567071.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:31.634Z,1520567071.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:32.030Z,1520567072.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:32.438Z,1520567072.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:32.842Z,1520567072.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:33.235Z,1520567073.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:33.639Z,1520567073.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:34.042Z,1520567074.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:34.430Z,1520567074.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:34.847Z,1520567074.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:35.242Z,1520567075.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:35.631Z,1520567075.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:36.046Z,1520567076.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:36.434Z,1520567076.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:36.834Z,1520567076.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:37.242Z,1520567077.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:37.643Z,1520567077.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:38.039Z,1520567078.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:38.442Z,1520567078.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:38.837Z,1520567078.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:39.230Z,1520567079.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:39.645Z,1520567079.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:40.034Z,1520567080.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:40.446Z,1520567080.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:40.846Z,1520567080.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:41.238Z,1520567081.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:41.628Z,1520567081.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:42.042Z,1520567082.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:42.438Z,1520567082.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:42.827Z,1520567082.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:43.234Z,1520567083.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:43.634Z,1520567083.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:44.027Z,1520567084.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:44.450Z,1520567084.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:44.839Z,1520567084.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:45.243Z,1520567085.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:45.634Z,1520567085.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:46.034Z,1520567086.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:46.434Z,1520567086.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:46.836Z,1520567086.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:47.234Z,1520567087.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:47.634Z,1520567087.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:48.038Z,1520567088.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:48.446Z,1520567088.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:48.841Z,1520567088.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:49.236Z,1520567089.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:49.637Z,1520567089.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:50.038Z,1520567090.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:50.443Z,1520567090.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:50.843Z,1520567090.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:51.240Z,1520567091.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:51.644Z,1520567091.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:52.034Z,1520567092.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:52.435Z,1520567092.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:52.842Z,1520567092.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:53.240Z,1520567093.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:53.631Z,1520567093.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:54.030Z,1520567094.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:54.434Z,1520567094.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:54.838Z,1520567094.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:55.231Z,1520567095.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:55.638Z,1520567095.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:56.055Z,1520567096.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:56.436Z,1520567096.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:56.839Z,1520567096.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:57.238Z,1520567097.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:57.641Z,1520567097.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:58.051Z,1520567098.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:58.447Z,1520567098.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:58.830Z,1520567098.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:59.237Z,1520567099.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:44:59.646Z,1520567099.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:00.030Z,1520567100.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:00.439Z,1520567100.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:00.841Z,1520567100.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:01.232Z,1520567101.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:01.655Z,1520567101.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:02.038Z,1520567102.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:02.438Z,1520567102.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:02.838Z,1520567102.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:03.243Z,1520567103.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:03.631Z,1520567103.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:04.035Z,1520567104.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:04.438Z,1520567104.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:04.835Z,1520567104.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:05.246Z,1520567105.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:05.641Z,1520567105.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:06.040Z,1520567106.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:06.441Z,1520567106.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:06.842Z,1520567106.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:07.242Z,1520567107.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:07.637Z,1520567107.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:08.047Z,1520567108.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:08.434Z,1520567108.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:08.838Z,1520567108.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:09.234Z,1520567109.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:09.634Z,1520567109.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:10.046Z,1520567110.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:10.439Z,1520567110.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:10.836Z,1520567110.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:11.237Z,1520567111.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:11.638Z,1520567111.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:12.031Z,1520567112.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:12.434Z,1520567112.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:12.835Z,1520567112.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:13.231Z,1520567113.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:13.646Z,1520567113.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:14.039Z,1520567114.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:14.442Z,1520567114.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:14.842Z,1520567114.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:15.242Z,1520567115.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:15.632Z,1520567115.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:16.047Z,1520567116.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:16.443Z,1520567116.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:16.839Z,1520567116.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:17.242Z,1520567117.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:17.631Z,1520567117.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:18.030Z,1520567118.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:18.445Z,1520567118.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:18.838Z,1520567118.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:19.231Z,1520567119.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:19.638Z,1520567119.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:20.030Z,1520567120.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:20.430Z,1520567120.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:20.838Z,1520567120.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:21.234Z,1520567121.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:21.638Z,1520567121.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:22.034Z,1520567122.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:22.434Z,1520567122.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:22.831Z,1520567122.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:23.239Z,1520567123.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:23.639Z,1520567123.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:24.039Z,1520567124.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:24.440Z,1520567124.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:24.842Z,1520567124.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:25.240Z,1520567125.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:25.641Z,1520567125.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:28.815Z,1520567128.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:28.939Z,1520567128.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:29.326Z,1520567129.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:29.727Z,1520567129.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:30.142Z,1520567130.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:30.522Z,1520567130.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:30.934Z,1520567130.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:31.321Z,1520567131.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:31.715Z,1520567131.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:32.129Z,1520567132.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:32.524Z,1520567132.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:32.922Z,1520567132.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:33.323Z,1520567133.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:33.725Z,1520567133.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:34.118Z,1520567134.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:34.522Z,1520567134.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:34.919Z,1520567134.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:35.328Z,1520567135.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:35.721Z,1520567135.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:36.112Z,1520567136.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:36.528Z,1520567136.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:36.923Z,1520567136.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:37.334Z,1520567137.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:37.727Z,1520567137.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:38.145Z,1520567138.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:38.538Z,1520567138.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:38.931Z,1520567138.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:39.337Z,1520567139.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:39.714Z,1520567139.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:40.122Z,1520567140.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:40.520Z,1520567140.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:40.925Z,1520567140.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:41.320Z,1520567141.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:41.726Z,1520567141.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:42.121Z,1520567142.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:42.522Z,1520567142.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:42.926Z,1520567142.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:43.320Z,1520567143.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:43.722Z,1520567143.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:44.126Z,1520567144.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:44.538Z,1520567144.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:44.926Z,1520567144.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:45.338Z,1520567145.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:45.735Z,1520567145.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:46.127Z,1520567146.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:46.532Z,1520567146.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:46.919Z,1520567146.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:47.326Z,1520567147.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:47.714Z,1520567147.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:48.131Z,1520567148.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:48.149Z,1520567148.149 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T03:45:48.149Z,1520567148.149 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 60
2018-03-09T03:45:48.149Z,1520567148.149 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T03:45:48.163Z,1520567148.163 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T03:45:48.514Z,1520567148.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:48.561Z,1520567148.561 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T03:45:48.561Z,1520567148.561 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 60
2018-03-09T03:45:48.914Z,1520567148.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:48.944Z,1520567148.944 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T03:45:48.945Z,1520567148.945 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T03:45:48.945Z,1520567148.945 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T03:45:49.310Z,1520567149.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:49.714Z,1520567149.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:50.114Z,1520567150.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:50.513Z,1520567150.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:50.918Z,1520567150.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:51.315Z,1520567151.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:51.720Z,1520567151.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:52.131Z,1520567152.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:52.523Z,1520567152.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:52.921Z,1520567152.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:53.327Z,1520567153.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:53.722Z,1520567153.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:54.108Z,1520567154.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:54.514Z,1520567154.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:54.934Z,1520567154.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:55.311Z,1520567155.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:55.710Z,1520567155.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:56.117Z,1520567156.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:56.536Z,1520567156.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:56.925Z,1520567156.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:57.318Z,1520567157.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:57.711Z,1520567157.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:58.114Z,1520567158.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:58.518Z,1520567158.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:58.911Z,1520567158.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:59.318Z,1520567159.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:45:59.722Z,1520567159.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:00.119Z,1520567160.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:00.522Z,1520567160.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:00.927Z,1520567160.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:01.317Z,1520567161.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:01.726Z,1520567161.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:02.134Z,1520567162.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:02.533Z,1520567162.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:02.931Z,1520567162.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:03.328Z,1520567163.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:03.711Z,1520567163.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:04.131Z,1520567164.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:04.514Z,1520567164.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:04.911Z,1520567164.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:05.314Z,1520567165.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:05.731Z,1520567165.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:06.115Z,1520567166.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:06.518Z,1520567166.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:06.917Z,1520567166.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:07.314Z,1520567167.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:07.723Z,1520567167.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:08.116Z,1520567168.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:08.548Z,1520567168.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:08.930Z,1520567168.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:09.322Z,1520567169.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:09.722Z,1520567169.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:10.125Z,1520567170.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:10.531Z,1520567170.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:10.922Z,1520567170.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:11.324Z,1520567171.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:11.725Z,1520567171.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:12.124Z,1520567172.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:12.523Z,1520567172.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:12.927Z,1520567172.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:13.323Z,1520567173.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:13.729Z,1520567173.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:14.121Z,1520567174.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:14.523Z,1520567174.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:14.931Z,1520567174.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:15.330Z,1520567175.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:15.720Z,1520567175.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:16.140Z,1520567176.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:16.536Z,1520567176.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:16.915Z,1520567176.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:17.320Z,1520567177.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:17.718Z,1520567177.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:18.121Z,1520567178.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:18.532Z,1520567178.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:18.920Z,1520567178.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:19.322Z,1520567179.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:19.725Z,1520567179.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:20.119Z,1520567180.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:20.524Z,1520567180.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:20.922Z,1520567180.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:21.319Z,1520567181.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:21.722Z,1520567181.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:22.122Z,1520567182.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:22.518Z,1520567182.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:22.922Z,1520567182.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:23.329Z,1520567183.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:23.720Z,1520567183.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:24.138Z,1520567184.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:24.528Z,1520567184.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:24.920Z,1520567184.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:25.331Z,1520567185.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:25.730Z,1520567185.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:28.916Z,1520567188.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:29.047Z,1520567189.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:29.392Z,1520567189.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:29.781Z,1520567189.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:30.191Z,1520567190.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:30.586Z,1520567190.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:30.986Z,1520567190.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:31.391Z,1520567191.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:31.795Z,1520567191.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:32.186Z,1520567192.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:32.582Z,1520567192.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:32.995Z,1520567192.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:33.381Z,1520567193.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:33.782Z,1520567193.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:34.200Z,1520567194.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:34.591Z,1520567194.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:34.974Z,1520567194.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:35.386Z,1520567195.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:35.774Z,1520567195.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:36.192Z,1520567196.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:36.586Z,1520567196.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:36.974Z,1520567196.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:37.374Z,1520567197.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:37.797Z,1520567197.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:38.175Z,1520567198.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:38.588Z,1520567198.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:38.978Z,1520567198.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:39.376Z,1520567199.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:39.779Z,1520567199.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:40.202Z,1520567200.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:40.580Z,1520567200.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:40.989Z,1520567200.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:41.393Z,1520567201.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:41.780Z,1520567201.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:42.185Z,1520567202.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:42.589Z,1520567202.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:42.979Z,1520567202.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:43.384Z,1520567203.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:43.786Z,1520567203.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:44.182Z,1520567204.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:44.591Z,1520567204.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:44.986Z,1520567204.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:45.387Z,1520567205.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:45.796Z,1520567205.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:46.198Z,1520567206.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:46.586Z,1520567206.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:46.998Z,1520567206.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:47.381Z,1520567207.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:47.775Z,1520567207.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:48.195Z,1520567208.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:48.593Z,1520567208.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:48.978Z,1520567208.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:49.391Z,1520567209.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:49.778Z,1520567209.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:50.175Z,1520567210.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:50.582Z,1520567210.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:50.978Z,1520567210.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:51.377Z,1520567211.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:51.782Z,1520567211.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:52.199Z,1520567212.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:52.575Z,1520567212.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:52.978Z,1520567212.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:53.397Z,1520567213.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:53.778Z,1520567213.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:54.179Z,1520567214.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:54.598Z,1520567214.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:54.974Z,1520567214.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:55.395Z,1520567215.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:55.778Z,1520567215.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:56.178Z,1520567216.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:56.578Z,1520567216.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:56.978Z,1520567216.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:57.379Z,1520567217.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:57.773Z,1520567217.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:58.204Z,1520567218.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:58.575Z,1520567218.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:58.979Z,1520567218.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:59.379Z,1520567219.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:46:59.779Z,1520567219.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:00.174Z,1520567220.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:00.578Z,1520567220.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:00.978Z,1520567220.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:01.382Z,1520567221.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:01.783Z,1520567221.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:02.179Z,1520567222.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:02.586Z,1520567222.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:02.987Z,1520567222.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:03.382Z,1520567223.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:03.783Z,1520567223.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:04.184Z,1520567224.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:04.585Z,1520567224.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:04.986Z,1520567224.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:05.384Z,1520567225.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:05.786Z,1520567225.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:06.185Z,1520567226.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:06.586Z,1520567226.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:06.991Z,1520567226.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:07.381Z,1520567227.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:07.789Z,1520567227.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:08.185Z,1520567228.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:08.582Z,1520567228.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:08.980Z,1520567228.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:09.386Z,1520567229.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:09.775Z,1520567229.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:10.191Z,1520567230.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:10.574Z,1520567230.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:10.975Z,1520567230.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:11.382Z,1520567231.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:11.779Z,1520567231.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:12.175Z,1520567232.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:12.598Z,1520567232.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:12.978Z,1520567232.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:13.375Z,1520567233.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:13.779Z,1520567233.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:14.174Z,1520567234.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:14.582Z,1520567234.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:14.987Z,1520567234.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:15.383Z,1520567235.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:15.775Z,1520567235.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:16.190Z,1520567236.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:16.584Z,1520567236.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:16.978Z,1520567236.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:17.387Z,1520567237.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:17.782Z,1520567237.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:18.183Z,1520567238.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:18.595Z,1520567238.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:18.989Z,1520567238.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:19.387Z,1520567239.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:19.795Z,1520567239.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:20.182Z,1520567240.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:20.586Z,1520567240.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:20.998Z,1520567240.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:21.375Z,1520567241.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:21.786Z,1520567241.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:22.181Z,1520567242.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:22.590Z,1520567242.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:22.975Z,1520567242.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:23.382Z,1520567243.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:23.790Z,1520567243.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:24.175Z,1520567244.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:24.578Z,1520567244.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:24.978Z,1520567244.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:25.009Z,1520567245.009 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-09T03:47:25.010Z,1520567245.010 [Default:CheckIn:C.Wait] Stopped
2018-03-09T03:47:25.010Z,1520567245.010 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-09T03:47:25.010Z,1520567245.010 [Default:CheckIn:D] Running Loop=1
2018-03-09T03:47:25.377Z,1520567245.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:25.410Z,1520567245.410 [Default:CheckIn:D] Stopped
2018-03-09T03:47:25.411Z,1520567245.411 [Default:CheckIn:E] Running Loop=1
2018-03-09T03:47:25.778Z,1520567245.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:25.821Z,1520567245.821 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1201.676693 min 
2018-03-09T03:47:25.821Z,1520567245.821 [Default:CheckIn:E] Stopped
2018-03-09T03:47:25.821Z,1520567245.821 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-09T03:47:25.821Z,1520567245.821 [Default:CheckIn] Stopped
2018-03-09T03:47:25.821Z,1520567245.821 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-09T03:47:25.822Z,1520567245.822 [Default:CheckIn](INFO): Running loop #121
2018-03-09T03:47:25.822Z,1520567245.822 [Default:CheckIn] Running Loop=121
2018-03-09T03:47:25.822Z,1520567245.822 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-09T03:47:25.822Z,1520567245.822 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-09T03:47:29.063Z,1520567249.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:29.159Z,1520567249.159 [NAL9602](INFO): Powering up
2018-03-09T03:47:29.176Z,1520567249.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:29.574Z,1520567249.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:29.971Z,1520567249.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:30.375Z,1520567250.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:30.768Z,1520567250.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:31.158Z,1520567251.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:31.558Z,1520567251.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:31.965Z,1520567251.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:32.371Z,1520567252.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:32.770Z,1520567252.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:33.181Z,1520567253.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:33.562Z,1520567253.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:33.959Z,1520567253.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:34.382Z,1520567254.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:34.762Z,1520567254.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:35.159Z,1520567255.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:35.562Z,1520567255.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:35.958Z,1520567255.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:36.366Z,1520567256.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:36.763Z,1520567256.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:37.166Z,1520567257.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:37.566Z,1520567257.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:37.970Z,1520567257.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:38.367Z,1520567258.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:38.762Z,1520567258.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:39.167Z,1520567259.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:39.574Z,1520567259.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:39.973Z,1520567259.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:40.355Z,1520567260.355 [NAL9602](INFO): NAL9602 initialized
2018-03-09T03:47:40.372Z,1520567260.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:40.771Z,1520567260.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:41.146Z,1520567261.146 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-09T03:47:41.146Z,1520567261.146 [NAL9602] Data Fault, FailCount= 3
2018-03-09T03:47:41.146Z,1520567261.146 [NAL9602](ERROR): Data Fault
2018-03-09T03:47:41.175Z,1520567261.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:41.230Z,1520567261.230 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-09T03:47:41.546Z,1520567261.546 [NAL9602](INFO): Powering down
2018-03-09T03:47:41.573Z,1520567261.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:41.973Z,1520567261.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:42.373Z,1520567262.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:42.403Z,1520567262.403 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-09T03:47:42.403Z,1520567262.403 [NAL9602] No Fault, FailCount= 3
2018-03-09T03:47:42.768Z,1520567262.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:43.174Z,1520567263.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:43.575Z,1520567263.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:43.965Z,1520567263.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:44.366Z,1520567264.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:44.759Z,1520567264.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:45.162Z,1520567265.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:45.558Z,1520567265.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:45.962Z,1520567265.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:46.363Z,1520567266.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:46.762Z,1520567266.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:47.162Z,1520567267.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:47.562Z,1520567267.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:47.967Z,1520567267.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:48.367Z,1520567268.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:48.767Z,1520567268.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:49.167Z,1520567269.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:49.565Z,1520567269.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:49.967Z,1520567269.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:50.365Z,1520567270.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:50.765Z,1520567270.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:51.172Z,1520567271.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:51.568Z,1520567271.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:51.975Z,1520567271.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:52.379Z,1520567272.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:52.762Z,1520567272.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:53.160Z,1520567273.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:53.562Z,1520567273.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:53.962Z,1520567273.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:54.362Z,1520567274.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:54.774Z,1520567274.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:55.162Z,1520567275.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:55.567Z,1520567275.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:55.967Z,1520567275.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:56.366Z,1520567276.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:56.763Z,1520567276.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:57.174Z,1520567277.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:57.569Z,1520567277.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:57.966Z,1520567277.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:58.369Z,1520567278.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:58.769Z,1520567278.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:59.169Z,1520567279.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:59.570Z,1520567279.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:47:59.973Z,1520567279.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:00.370Z,1520567280.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:00.770Z,1520567280.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:01.170Z,1520567281.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:01.570Z,1520567281.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:01.979Z,1520567281.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:02.374Z,1520567282.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:02.768Z,1520567282.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:03.170Z,1520567283.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:03.570Z,1520567283.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:03.968Z,1520567283.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:04.370Z,1520567284.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:04.766Z,1520567284.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:05.167Z,1520567285.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:05.570Z,1520567285.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:05.974Z,1520567285.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:06.371Z,1520567286.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:06.770Z,1520567286.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:07.171Z,1520567287.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:07.571Z,1520567287.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:07.981Z,1520567287.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:08.374Z,1520567288.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:08.759Z,1520567288.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:09.174Z,1520567289.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:09.575Z,1520567289.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:09.959Z,1520567289.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:10.362Z,1520567290.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:10.762Z,1520567290.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:11.159Z,1520567291.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:11.562Z,1520567291.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:11.946Z,1520567291.946 [NAL9602](INFO): Powering up NAL9602
2018-03-09T03:48:11.963Z,1520567291.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:12.366Z,1520567292.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:12.762Z,1520567292.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:13.162Z,1520567293.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:13.566Z,1520567293.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:13.981Z,1520567293.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:14.363Z,1520567294.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:14.759Z,1520567294.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:15.162Z,1520567295.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:15.562Z,1520567295.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:15.958Z,1520567295.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:16.362Z,1520567296.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:16.766Z,1520567296.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:17.160Z,1520567297.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:17.567Z,1520567297.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:17.964Z,1520567297.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:18.362Z,1520567298.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:18.766Z,1520567298.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:19.171Z,1520567299.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:19.569Z,1520567299.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:19.971Z,1520567299.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:20.371Z,1520567300.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:20.770Z,1520567300.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:21.170Z,1520567301.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:21.574Z,1520567301.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:21.968Z,1520567301.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:22.370Z,1520567302.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:22.777Z,1520567302.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:23.146Z,1520567303.146 [NAL9602](INFO): NAL9602 initialized
2018-03-09T03:48:23.172Z,1520567303.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:23.574Z,1520567303.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:23.982Z,1520567303.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:24.384Z,1520567304.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:24.781Z,1520567304.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:25.171Z,1520567305.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:25.569Z,1520567305.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:25.965Z,1520567305.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:29.327Z,1520567309.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:29.445Z,1520567309.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:29.809Z,1520567309.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:30.194Z,1520567310.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:30.594Z,1520567310.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:30.996Z,1520567310.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:31.395Z,1520567311.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:31.793Z,1520567311.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:32.199Z,1520567312.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:32.595Z,1520567312.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:32.989Z,1520567312.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:33.407Z,1520567313.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:33.805Z,1520567313.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:34.204Z,1520567314.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:34.609Z,1520567314.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:35.009Z,1520567315.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:35.386Z,1520567315.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:35.790Z,1520567315.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:36.191Z,1520567316.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:36.591Z,1520567316.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:36.994Z,1520567316.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:37.390Z,1520567317.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:37.785Z,1520567317.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:38.200Z,1520567318.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:38.599Z,1520567318.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:39.001Z,1520567319.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:39.401Z,1520567319.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:39.797Z,1520567319.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:40.199Z,1520567320.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:40.598Z,1520567320.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:41.004Z,1520567321.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:41.397Z,1520567321.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:41.797Z,1520567321.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:42.211Z,1520567322.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:42.596Z,1520567322.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:43.005Z,1520567323.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:43.413Z,1520567323.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:43.786Z,1520567323.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:44.199Z,1520567324.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:44.599Z,1520567324.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:44.986Z,1520567324.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:45.394Z,1520567325.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:45.801Z,1520567325.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:46.187Z,1520567326.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:46.590Z,1520567326.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:46.990Z,1520567326.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:47.390Z,1520567327.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:47.790Z,1520567327.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:48.191Z,1520567328.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:48.586Z,1520567328.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:49.009Z,1520567329.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:49.030Z,1520567329.030 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T03:48:49.031Z,1520567329.031 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 61
2018-03-09T03:48:49.031Z,1520567329.031 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T03:48:49.059Z,1520567329.059 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T03:48:49.411Z,1520567329.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:49.442Z,1520567329.442 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T03:48:49.442Z,1520567329.442 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 61
2018-03-09T03:48:49.786Z,1520567329.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:49.825Z,1520567329.825 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T03:48:49.826Z,1520567329.826 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T03:48:49.826Z,1520567329.826 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T03:48:50.212Z,1520567330.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:50.590Z,1520567330.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:50.986Z,1520567330.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:51.413Z,1520567331.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:51.815Z,1520567331.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:52.191Z,1520567332.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:52.591Z,1520567332.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:52.995Z,1520567332.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:53.395Z,1520567333.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:53.807Z,1520567333.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:54.197Z,1520567334.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:54.594Z,1520567334.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:55.002Z,1520567335.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:55.399Z,1520567335.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:55.801Z,1520567335.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:56.222Z,1520567336.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:56.600Z,1520567336.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:56.999Z,1520567336.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:57.403Z,1520567337.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:57.799Z,1520567337.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:58.203Z,1520567338.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:58.593Z,1520567338.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:59.003Z,1520567339.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:59.386Z,1520567339.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:48:59.804Z,1520567339.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:00.210Z,1520567340.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:00.609Z,1520567340.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:01.016Z,1520567341.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:01.410Z,1520567341.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:01.790Z,1520567341.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:02.191Z,1520567342.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:02.590Z,1520567342.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:02.986Z,1520567342.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:03.390Z,1520567343.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:03.786Z,1520567343.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:04.195Z,1520567344.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:04.593Z,1520567344.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:04.990Z,1520567344.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:05.405Z,1520567345.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:05.809Z,1520567345.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:06.205Z,1520567346.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:06.609Z,1520567346.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:06.995Z,1520567346.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:07.394Z,1520567347.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:07.796Z,1520567347.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:08.199Z,1520567348.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:08.595Z,1520567348.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:08.992Z,1520567348.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:09.398Z,1520567349.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:09.799Z,1520567349.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:10.193Z,1520567350.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:10.622Z,1520567350.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:11.008Z,1520567351.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:11.409Z,1520567351.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:11.809Z,1520567351.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:12.187Z,1520567352.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:12.597Z,1520567352.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:12.993Z,1520567352.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:13.386Z,1520567353.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:13.793Z,1520567353.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:14.212Z,1520567354.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:14.597Z,1520567354.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:15.009Z,1520567355.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:15.389Z,1520567355.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:15.814Z,1520567355.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:16.210Z,1520567356.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:16.616Z,1520567356.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:17.009Z,1520567357.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:17.410Z,1520567357.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:17.790Z,1520567357.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:18.195Z,1520567358.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:18.594Z,1520567358.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:18.990Z,1520567358.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:19.386Z,1520567359.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:19.790Z,1520567359.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:20.191Z,1520567360.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:20.594Z,1520567360.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:21.014Z,1520567361.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:21.409Z,1520567361.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:21.814Z,1520567361.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:22.209Z,1520567362.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:22.590Z,1520567362.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:22.991Z,1520567362.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:23.390Z,1520567363.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:23.790Z,1520567363.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:24.190Z,1520567364.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:24.621Z,1520567364.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:25.018Z,1520567365.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:25.412Z,1520567365.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:25.794Z,1520567365.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:26.209Z,1520567366.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:29.473Z,1520567369.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:29.601Z,1520567369.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:29.980Z,1520567369.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:30.371Z,1520567370.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:30.775Z,1520567370.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:31.171Z,1520567371.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:31.555Z,1520567371.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:31.959Z,1520567371.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:32.359Z,1520567372.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:32.771Z,1520567372.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:33.171Z,1520567373.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:33.559Z,1520567373.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:33.978Z,1520567373.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:34.381Z,1520567374.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:34.778Z,1520567374.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:35.154Z,1520567375.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:35.579Z,1520567375.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:35.989Z,1520567375.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:36.365Z,1520567376.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:36.759Z,1520567376.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:37.158Z,1520567377.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:37.554Z,1520567377.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:37.962Z,1520567377.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:38.366Z,1520567378.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:38.759Z,1520567378.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:39.163Z,1520567379.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:39.558Z,1520567379.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:39.962Z,1520567379.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:40.359Z,1520567380.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:40.758Z,1520567380.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:41.159Z,1520567381.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:41.575Z,1520567381.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:41.966Z,1520567381.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:42.367Z,1520567382.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:42.766Z,1520567382.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:43.167Z,1520567383.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:43.570Z,1520567383.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:43.961Z,1520567383.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:44.366Z,1520567384.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:44.777Z,1520567384.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:45.167Z,1520567385.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:45.572Z,1520567385.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:45.975Z,1520567385.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:46.371Z,1520567386.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:46.768Z,1520567386.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:47.167Z,1520567387.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:47.564Z,1520567387.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:47.971Z,1520567387.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:48.368Z,1520567388.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:48.758Z,1520567388.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:49.169Z,1520567389.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:49.569Z,1520567389.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:49.956Z,1520567389.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:50.358Z,1520567390.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:50.770Z,1520567390.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:51.156Z,1520567391.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:51.574Z,1520567391.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:51.963Z,1520567391.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:52.359Z,1520567392.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:52.768Z,1520567392.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:53.176Z,1520567393.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:53.568Z,1520567393.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:53.972Z,1520567393.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:54.376Z,1520567394.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:54.752Z,1520567394.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:55.157Z,1520567395.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:55.558Z,1520567395.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:55.958Z,1520567395.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:56.360Z,1520567396.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:56.759Z,1520567396.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:57.152Z,1520567397.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:57.562Z,1520567397.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:57.982Z,1520567397.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:58.381Z,1520567398.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:58.778Z,1520567398.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:59.183Z,1520567399.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:59.563Z,1520567399.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:49:59.958Z,1520567399.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:00.358Z,1520567400.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:00.756Z,1520567400.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:01.158Z,1520567401.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:01.566Z,1520567401.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:01.958Z,1520567401.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:02.362Z,1520567402.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:02.767Z,1520567402.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:03.172Z,1520567403.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:03.576Z,1520567403.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:03.981Z,1520567403.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:04.377Z,1520567404.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:04.761Z,1520567404.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:05.158Z,1520567405.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:05.562Z,1520567405.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:05.957Z,1520567405.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:06.358Z,1520567406.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:06.756Z,1520567406.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:07.158Z,1520567407.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:07.562Z,1520567407.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:07.952Z,1520567407.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:08.381Z,1520567408.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:08.778Z,1520567408.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:09.177Z,1520567409.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:09.589Z,1520567409.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:09.958Z,1520567409.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:10.362Z,1520567410.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:10.777Z,1520567410.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:11.181Z,1520567411.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:11.556Z,1520567411.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:11.957Z,1520567411.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:12.358Z,1520567412.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:12.756Z,1520567412.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:13.164Z,1520567413.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:13.577Z,1520567413.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:13.965Z,1520567413.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:14.381Z,1520567414.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:14.773Z,1520567414.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:15.159Z,1520567415.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:15.574Z,1520567415.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:15.969Z,1520567415.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:16.366Z,1520567416.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:16.776Z,1520567416.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:17.167Z,1520567417.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:17.557Z,1520567417.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:17.976Z,1520567417.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:18.380Z,1520567418.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:18.776Z,1520567418.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:19.175Z,1520567419.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:19.578Z,1520567419.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:19.958Z,1520567419.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:20.362Z,1520567420.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:20.760Z,1520567420.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:21.157Z,1520567421.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:21.559Z,1520567421.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:21.959Z,1520567421.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:22.359Z,1520567422.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:22.758Z,1520567422.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:23.159Z,1520567423.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:23.559Z,1520567423.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:23.974Z,1520567423.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:24.367Z,1520567424.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:24.762Z,1520567424.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:25.168Z,1520567425.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:25.567Z,1520567425.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:25.964Z,1520567425.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:26.376Z,1520567426.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:29.553Z,1520567429.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:29.706Z,1520567429.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:30.039Z,1520567430.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:30.441Z,1520567430.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:30.827Z,1520567430.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:31.231Z,1520567431.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:31.631Z,1520567431.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:32.038Z,1520567432.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:32.446Z,1520567432.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:32.834Z,1520567432.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:33.223Z,1520567433.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:33.639Z,1520567433.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:34.034Z,1520567434.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:34.439Z,1520567434.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:34.843Z,1520567434.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:35.226Z,1520567435.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:35.626Z,1520567435.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:36.042Z,1520567436.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:36.450Z,1520567436.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:36.833Z,1520567436.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:37.234Z,1520567437.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:37.627Z,1520567437.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:38.026Z,1520567438.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:38.439Z,1520567438.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:38.831Z,1520567438.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:39.229Z,1520567439.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:39.631Z,1520567439.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:40.025Z,1520567440.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:40.427Z,1520567440.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:40.845Z,1520567440.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:41.247Z,1520567441.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:41.653Z,1520567441.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:42.037Z,1520567442.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:42.434Z,1520567442.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:42.821Z,1520567442.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:43.237Z,1520567443.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:43.631Z,1520567443.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:44.023Z,1520567444.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:44.435Z,1520567444.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:44.835Z,1520567444.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:45.220Z,1520567445.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:45.659Z,1520567445.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:46.037Z,1520567446.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:46.441Z,1520567446.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:46.841Z,1520567446.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:47.235Z,1520567447.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:47.622Z,1520567447.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:48.027Z,1520567448.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:48.426Z,1520567448.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:48.822Z,1520567448.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:49.226Z,1520567449.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:49.631Z,1520567449.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:50.020Z,1520567450.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:50.437Z,1520567450.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:50.841Z,1520567450.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:51.237Z,1520567451.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:51.645Z,1520567451.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:52.035Z,1520567452.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:52.431Z,1520567452.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:52.835Z,1520567452.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:53.247Z,1520567453.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:53.624Z,1520567453.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:54.030Z,1520567454.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:54.431Z,1520567454.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:54.824Z,1520567454.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:55.230Z,1520567455.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:55.653Z,1520567455.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:56.037Z,1520567456.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:56.452Z,1520567456.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:56.846Z,1520567456.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:57.227Z,1520567457.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:57.632Z,1520567457.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:58.031Z,1520567458.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:58.436Z,1520567458.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:58.834Z,1520567458.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:59.231Z,1520567459.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:50:59.626Z,1520567459.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:00.039Z,1520567460.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:00.448Z,1520567460.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:00.846Z,1520567460.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:01.241Z,1520567461.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:01.650Z,1520567461.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:02.045Z,1520567462.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:02.435Z,1520567462.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:02.832Z,1520567462.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:03.232Z,1520567463.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:03.630Z,1520567463.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:04.039Z,1520567464.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:04.439Z,1520567464.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:04.839Z,1520567464.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:05.227Z,1520567465.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:05.630Z,1520567465.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:06.047Z,1520567466.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:06.445Z,1520567466.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:06.848Z,1520567466.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:07.255Z,1520567467.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:07.623Z,1520567467.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:08.039Z,1520567468.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:08.433Z,1520567468.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:08.834Z,1520567468.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:09.228Z,1520567469.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:09.641Z,1520567469.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:10.022Z,1520567470.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:10.423Z,1520567470.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:10.831Z,1520567470.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:11.245Z,1520567471.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:11.645Z,1520567471.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:12.046Z,1520567472.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:12.445Z,1520567472.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:12.831Z,1520567472.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:13.236Z,1520567473.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:13.635Z,1520567473.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:14.032Z,1520567474.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:14.434Z,1520567474.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:14.822Z,1520567474.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:15.238Z,1520567475.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:15.629Z,1520567475.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:16.022Z,1520567476.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:16.433Z,1520567476.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:16.837Z,1520567476.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:17.240Z,1520567477.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:17.645Z,1520567477.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:18.034Z,1520567478.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:18.435Z,1520567478.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:18.836Z,1520567478.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:19.238Z,1520567479.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:19.639Z,1520567479.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:20.026Z,1520567480.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:20.430Z,1520567480.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:20.830Z,1520567480.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:21.226Z,1520567481.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:21.650Z,1520567481.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:22.050Z,1520567482.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:22.454Z,1520567482.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:22.837Z,1520567482.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:23.226Z,1520567483.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:23.631Z,1520567483.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:24.031Z,1520567484.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:24.434Z,1520567484.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:24.825Z,1520567484.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:25.247Z,1520567485.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:25.641Z,1520567485.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:26.026Z,1520567486.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:26.426Z,1520567486.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:29.658Z,1520567489.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:29.799Z,1520567489.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:30.182Z,1520567490.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:30.585Z,1520567490.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:30.974Z,1520567490.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:31.378Z,1520567491.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:31.770Z,1520567491.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:32.166Z,1520567492.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:32.574Z,1520567492.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:32.968Z,1520567492.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:33.367Z,1520567493.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:33.777Z,1520567493.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:34.171Z,1520567494.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:34.576Z,1520567494.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:34.976Z,1520567494.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:35.381Z,1520567495.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:35.780Z,1520567495.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:36.171Z,1520567496.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:36.558Z,1520567496.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:36.975Z,1520567496.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:37.367Z,1520567497.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:37.772Z,1520567497.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:38.171Z,1520567498.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:38.567Z,1520567498.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:38.959Z,1520567498.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:39.371Z,1520567499.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:39.781Z,1520567499.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:40.178Z,1520567500.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:40.582Z,1520567500.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:40.982Z,1520567500.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:41.358Z,1520567501.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:41.763Z,1520567501.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:42.166Z,1520567502.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:42.559Z,1520567502.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:42.963Z,1520567502.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:43.362Z,1520567503.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:43.762Z,1520567503.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:44.167Z,1520567504.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:44.562Z,1520567504.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:44.986Z,1520567504.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:45.385Z,1520567505.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:45.782Z,1520567505.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:46.179Z,1520567506.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:46.563Z,1520567506.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:46.979Z,1520567506.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:47.363Z,1520567507.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:47.767Z,1520567507.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:48.181Z,1520567508.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:48.558Z,1520567508.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:48.967Z,1520567508.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:49.362Z,1520567509.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:49.763Z,1520567509.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:50.186Z,1520567510.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:50.204Z,1520567510.204 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T03:51:50.204Z,1520567510.204 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 62
2018-03-09T03:51:50.204Z,1520567510.204 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T03:51:50.217Z,1520567510.217 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T03:51:50.577Z,1520567510.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:50.622Z,1520567510.622 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T03:51:50.622Z,1520567510.622 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 62
2018-03-09T03:51:50.981Z,1520567510.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:51.007Z,1520567511.007 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T03:51:51.008Z,1520567511.008 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T03:51:51.008Z,1520567511.008 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T03:51:51.382Z,1520567511.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:51.763Z,1520567511.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:52.166Z,1520567512.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:52.563Z,1520567512.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:52.962Z,1520567512.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:53.362Z,1520567513.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:53.770Z,1520567513.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:54.163Z,1520567514.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:54.567Z,1520567514.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:54.970Z,1520567514.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:55.377Z,1520567515.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:55.778Z,1520567515.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:56.178Z,1520567516.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:56.581Z,1520567516.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:56.973Z,1520567516.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:57.365Z,1520567517.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:57.773Z,1520567517.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:58.173Z,1520567518.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:58.572Z,1520567518.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:58.970Z,1520567518.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:59.368Z,1520567519.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:51:59.767Z,1520567519.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:00.180Z,1520567520.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:00.585Z,1520567520.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:00.983Z,1520567520.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:01.385Z,1520567521.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:01.782Z,1520567521.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:02.160Z,1520567522.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:02.562Z,1520567522.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:02.962Z,1520567522.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:03.357Z,1520567523.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:03.764Z,1520567523.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:04.167Z,1520567524.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:04.559Z,1520567524.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:04.963Z,1520567524.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:05.363Z,1520567525.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:05.775Z,1520567525.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:06.178Z,1520567526.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:06.581Z,1520567526.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:06.969Z,1520567526.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:07.378Z,1520567527.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:07.776Z,1520567527.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:08.193Z,1520567528.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:08.562Z,1520567528.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:08.963Z,1520567528.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:09.360Z,1520567529.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:09.767Z,1520567529.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:10.159Z,1520567530.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:10.563Z,1520567530.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:10.982Z,1520567530.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:11.377Z,1520567531.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:11.779Z,1520567531.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:12.189Z,1520567532.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:12.566Z,1520567532.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:12.959Z,1520567532.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:13.370Z,1520567533.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:13.412Z,1520567533.412 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-09T03:52:13.762Z,1520567533.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:14.156Z,1520567534.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:14.562Z,1520567534.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:14.970Z,1520567534.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:15.360Z,1520567535.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:15.771Z,1520567535.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:16.177Z,1520567536.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:16.574Z,1520567536.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:16.980Z,1520567536.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:17.386Z,1520567537.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:17.760Z,1520567537.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:18.169Z,1520567538.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:18.571Z,1520567538.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:18.969Z,1520567538.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:19.365Z,1520567539.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:19.772Z,1520567539.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:20.159Z,1520567540.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:20.563Z,1520567540.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:20.963Z,1520567540.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:21.369Z,1520567541.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:21.777Z,1520567541.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:22.177Z,1520567542.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:22.570Z,1520567542.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:22.962Z,1520567542.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:23.362Z,1520567543.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:23.760Z,1520567543.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:24.171Z,1520567544.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:24.570Z,1520567544.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:24.960Z,1520567544.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:25.367Z,1520567545.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:25.768Z,1520567545.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:26.163Z,1520567546.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:26.188Z,1520567546.188 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-09T03:47:25.8Z
2018-03-09T03:52:26.188Z,1520567546.188 [Default:CheckIn:Read_GPS] Stopped
2018-03-09T03:52:26.189Z,1520567546.189 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-09T03:52:26.577Z,1520567546.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:29.911Z,1520567549.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:30.038Z,1520567550.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:30.357Z,1520567550.357 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180308T074127/Courier0484.lzma
2018-03-09T03:52:30.401Z,1520567550.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:30.783Z,1520567550.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:31.157Z,1520567551.157 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0484.lzma.bak
2018-03-09T03:52:31.157Z,1520567551.157 [DataOverHttps](INFO): SBD MOMSN=7992007
2018-03-09T03:52:31.192Z,1520567551.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:31.791Z,1520567551.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:31.987Z,1520567551.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:35.353Z,1520567555.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:35.484Z,1520567555.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:35.883Z,1520567555.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:36.274Z,1520567556.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:36.675Z,1520567556.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:37.062Z,1520567557.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:37.462Z,1520567557.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:40.725Z,1520567560.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:40.892Z,1520567560.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:41.193Z,1520567561.193 [DataOverHttps](INFO): Sending 215 bytes from file Logs/20180308T074127/Express0485.lzma
2018-03-09T03:52:41.237Z,1520567561.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:41.625Z,1520567561.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:41.992Z,1520567561.992 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0485.lzma.bak
2018-03-09T03:52:41.992Z,1520567561.992 [DataOverHttps](INFO): SBD MOMSN=7992009
2018-03-09T03:52:42.030Z,1520567562.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:42.627Z,1520567562.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:42.647Z,1520567562.647 [Default:CheckIn:Read_Iridium] Stopped
2018-03-09T03:52:42.647Z,1520567562.647 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-09T03:52:42.647Z,1520567562.647 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-09T03:52:42.819Z,1520567562.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:45.982Z,1520567565.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:46.129Z,1520567566.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:46.512Z,1520567566.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:46.911Z,1520567566.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:47.335Z,1520567567.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:47.700Z,1520567567.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:48.094Z,1520567568.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:48.505Z,1520567568.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:48.906Z,1520567568.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:49.291Z,1520567569.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:49.716Z,1520567569.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:50.083Z,1520567570.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:50.501Z,1520567570.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:50.912Z,1520567570.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:51.297Z,1520567571.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:51.704Z,1520567571.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:52.102Z,1520567572.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:52.485Z,1520567572.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:52.891Z,1520567572.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:53.291Z,1520567573.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:53.684Z,1520567573.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:54.087Z,1520567574.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:54.488Z,1520567574.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:54.912Z,1520567574.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:55.289Z,1520567575.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:55.719Z,1520567575.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:56.118Z,1520567576.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:56.510Z,1520567576.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:56.922Z,1520567576.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:57.306Z,1520567577.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:57.695Z,1520567577.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:58.122Z,1520567578.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:58.507Z,1520567578.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:58.915Z,1520567578.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:59.294Z,1520567579.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:52:59.695Z,1520567579.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:00.091Z,1520567580.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:00.499Z,1520567580.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:00.897Z,1520567580.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:01.311Z,1520567581.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:01.700Z,1520567581.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:02.100Z,1520567582.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:02.533Z,1520567582.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:02.888Z,1520567582.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:03.320Z,1520567583.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:03.718Z,1520567583.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:04.093Z,1520567584.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:04.502Z,1520567584.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:04.925Z,1520567584.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:05.307Z,1520567585.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:05.691Z,1520567585.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:06.103Z,1520567586.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:06.496Z,1520567586.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:06.895Z,1520567586.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:07.313Z,1520567587.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:07.710Z,1520567587.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:08.090Z,1520567588.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:08.504Z,1520567588.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:08.892Z,1520567588.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:09.294Z,1520567589.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:09.677Z,1520567589.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:10.087Z,1520567590.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:10.507Z,1520567590.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:10.883Z,1520567590.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:11.318Z,1520567591.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:11.708Z,1520567591.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:12.109Z,1520567592.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:12.509Z,1520567592.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:12.912Z,1520567592.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:13.297Z,1520567593.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:13.724Z,1520567593.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:14.097Z,1520567594.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:14.499Z,1520567594.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:14.915Z,1520567594.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:15.300Z,1520567595.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:15.699Z,1520567595.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:16.081Z,1520567596.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:16.498Z,1520567596.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:16.906Z,1520567596.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:17.298Z,1520567597.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:17.701Z,1520567597.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:18.101Z,1520567598.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:18.501Z,1520567598.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:18.881Z,1520567598.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:19.331Z,1520567599.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:19.721Z,1520567599.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:20.094Z,1520567600.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:20.509Z,1520567600.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:20.899Z,1520567600.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:21.293Z,1520567601.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:21.720Z,1520567601.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:22.102Z,1520567602.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:22.512Z,1520567602.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:22.895Z,1520567602.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:23.302Z,1520567603.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:23.697Z,1520567603.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:24.094Z,1520567604.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:24.492Z,1520567604.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:24.895Z,1520567604.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:25.282Z,1520567605.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:25.677Z,1520567605.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:26.082Z,1520567606.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:26.516Z,1520567606.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:26.881Z,1520567606.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:27.312Z,1520567607.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:27.724Z,1520567607.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:28.108Z,1520567608.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:28.504Z,1520567608.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:28.908Z,1520567608.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:29.310Z,1520567609.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:29.673Z,1520567609.673 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-09T03:53:29.690Z,1520567609.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:30.120Z,1520567610.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:30.495Z,1520567610.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:30.896Z,1520567610.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:31.294Z,1520567611.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:31.695Z,1520567611.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:32.098Z,1520567612.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:32.489Z,1520567612.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:32.895Z,1520567612.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:33.300Z,1520567613.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:33.682Z,1520567613.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:34.078Z,1520567614.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:34.483Z,1520567614.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:34.924Z,1520567614.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:35.272Z,1520567615.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:35.711Z,1520567615.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:36.090Z,1520567616.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:36.490Z,1520567616.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:36.906Z,1520567616.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:37.313Z,1520567617.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:37.713Z,1520567617.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:38.091Z,1520567618.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:38.508Z,1520567618.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:38.909Z,1520567618.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:39.305Z,1520567619.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:39.691Z,1520567619.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:40.090Z,1520567620.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:40.500Z,1520567620.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:40.904Z,1520567620.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:41.289Z,1520567621.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:41.681Z,1520567621.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:42.077Z,1520567622.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:42.528Z,1520567622.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:42.883Z,1520567622.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:43.312Z,1520567623.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:46.551Z,1520567626.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:46.664Z,1520567626.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:47.026Z,1520567627.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:47.426Z,1520567627.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:47.823Z,1520567627.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:48.219Z,1520567628.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:48.619Z,1520567628.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:49.020Z,1520567629.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:49.430Z,1520567629.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:49.825Z,1520567629.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:50.223Z,1520567630.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:50.623Z,1520567630.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:51.034Z,1520567631.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:51.422Z,1520567631.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:51.832Z,1520567631.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:52.224Z,1520567632.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:52.612Z,1520567632.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:53.027Z,1520567633.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:53.414Z,1520567633.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:53.813Z,1520567633.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:54.218Z,1520567634.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:54.615Z,1520567634.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:55.011Z,1520567635.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:55.414Z,1520567635.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:55.809Z,1520567635.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:56.214Z,1520567636.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:56.642Z,1520567636.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:57.016Z,1520567637.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:57.423Z,1520567637.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:57.841Z,1520567637.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:58.232Z,1520567638.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:58.620Z,1520567638.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:59.044Z,1520567639.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:59.421Z,1520567639.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:53:59.821Z,1520567639.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:00.210Z,1520567640.210 [NAL9602](INFO): Powering down
2018-03-09T03:54:00.235Z,1520567640.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:00.624Z,1520567640.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:01.015Z,1520567641.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:01.422Z,1520567641.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:01.825Z,1520567641.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:02.214Z,1520567642.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:02.615Z,1520567642.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:03.014Z,1520567643.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:03.411Z,1520567643.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:03.813Z,1520567643.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:04.214Z,1520567644.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:04.609Z,1520567644.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:05.034Z,1520567645.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:05.414Z,1520567645.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:05.818Z,1520567645.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:06.214Z,1520567646.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:06.618Z,1520567646.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:07.012Z,1520567647.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:07.414Z,1520567647.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:07.822Z,1520567647.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:08.218Z,1520567648.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:08.619Z,1520567648.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:09.019Z,1520567649.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:09.418Z,1520567649.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:09.829Z,1520567649.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:10.221Z,1520567650.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:10.622Z,1520567650.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:11.031Z,1520567651.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:11.422Z,1520567651.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:11.822Z,1520567651.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:12.222Z,1520567652.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:12.622Z,1520567652.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:13.019Z,1520567653.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:13.421Z,1520567653.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:13.823Z,1520567653.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:14.222Z,1520567654.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:14.620Z,1520567654.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:15.026Z,1520567655.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:15.419Z,1520567655.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:15.818Z,1520567655.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:16.222Z,1520567656.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:16.623Z,1520567656.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:17.021Z,1520567657.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:17.422Z,1520567657.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:17.822Z,1520567657.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:18.217Z,1520567658.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:18.614Z,1520567658.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:19.010Z,1520567659.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:19.414Z,1520567659.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:19.814Z,1520567659.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:20.218Z,1520567660.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:20.615Z,1520567660.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:21.014Z,1520567661.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:21.411Z,1520567661.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:21.814Z,1520567661.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:22.218Z,1520567662.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:22.618Z,1520567662.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:23.018Z,1520567663.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:23.414Z,1520567663.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:23.818Z,1520567663.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:24.220Z,1520567664.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:24.619Z,1520567664.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:25.020Z,1520567665.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:25.432Z,1520567665.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:25.822Z,1520567665.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:26.225Z,1520567666.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:26.622Z,1520567666.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:27.022Z,1520567667.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:27.419Z,1520567667.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:27.822Z,1520567667.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:28.229Z,1520567668.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:28.627Z,1520567668.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:29.023Z,1520567669.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:29.418Z,1520567669.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:29.826Z,1520567669.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:30.227Z,1520567670.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:30.615Z,1520567670.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:31.022Z,1520567671.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:31.431Z,1520567671.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:31.826Z,1520567671.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:32.223Z,1520567672.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:32.631Z,1520567672.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:33.021Z,1520567673.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:33.410Z,1520567673.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:33.821Z,1520567673.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:34.233Z,1520567674.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:34.611Z,1520567674.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:35.023Z,1520567675.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:35.409Z,1520567675.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:35.811Z,1520567675.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:36.221Z,1520567676.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:36.610Z,1520567676.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:37.025Z,1520567677.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:37.430Z,1520567677.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:37.823Z,1520567677.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:38.223Z,1520567678.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:38.621Z,1520567678.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:39.023Z,1520567679.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:39.410Z,1520567679.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:39.834Z,1520567679.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:40.234Z,1520567680.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:40.611Z,1520567680.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:41.021Z,1520567681.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:41.427Z,1520567681.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:41.811Z,1520567681.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:42.221Z,1520567682.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:42.627Z,1520567682.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:43.012Z,1520567683.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:43.421Z,1520567683.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:46.686Z,1520567686.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:46.800Z,1520567686.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:47.191Z,1520567687.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:47.578Z,1520567687.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:47.982Z,1520567687.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:48.383Z,1520567688.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:48.782Z,1520567688.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:49.179Z,1520567689.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:49.581Z,1520567689.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:49.986Z,1520567689.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:50.387Z,1520567690.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:50.786Z,1520567690.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:51.189Z,1520567691.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:51.231Z,1520567691.231 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T03:54:51.231Z,1520567691.231 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 63
2018-03-09T03:54:51.231Z,1520567691.231 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T03:54:51.244Z,1520567691.244 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T03:54:51.590Z,1520567691.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:51.649Z,1520567691.649 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T03:54:51.650Z,1520567691.650 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 63
2018-03-09T03:54:51.998Z,1520567691.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:52.015Z,1520567692.015 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T03:54:52.015Z,1520567692.015 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T03:54:52.015Z,1520567692.015 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T03:54:52.382Z,1520567692.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:52.786Z,1520567692.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:53.187Z,1520567693.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:53.591Z,1520567693.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:53.990Z,1520567693.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:54.386Z,1520567694.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:54.790Z,1520567694.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:55.189Z,1520567695.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:55.590Z,1520567695.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:55.992Z,1520567695.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:56.378Z,1520567696.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:56.782Z,1520567696.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:57.178Z,1520567697.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:57.586Z,1520567697.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:57.982Z,1520567697.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:58.386Z,1520567698.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:58.787Z,1520567698.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:59.191Z,1520567699.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:59.591Z,1520567699.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:54:59.988Z,1520567699.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:00.398Z,1520567700.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:00.786Z,1520567700.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:01.182Z,1520567701.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:01.582Z,1520567701.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:01.990Z,1520567701.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:02.386Z,1520567702.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:02.796Z,1520567702.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:03.186Z,1520567703.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:03.583Z,1520567703.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:03.991Z,1520567703.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:04.393Z,1520567704.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:04.783Z,1520567704.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:05.187Z,1520567705.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:05.720Z,1520567705.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:05.983Z,1520567705.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:06.390Z,1520567706.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:06.782Z,1520567706.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:07.182Z,1520567707.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:07.587Z,1520567707.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:07.990Z,1520567707.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:08.390Z,1520567708.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:08.786Z,1520567708.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:09.191Z,1520567709.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:09.590Z,1520567709.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:09.985Z,1520567709.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:10.388Z,1520567710.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:10.790Z,1520567710.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:11.190Z,1520567711.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:11.594Z,1520567711.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:11.982Z,1520567711.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:12.382Z,1520567712.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:12.787Z,1520567712.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:13.186Z,1520567713.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:13.591Z,1520567713.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:13.990Z,1520567713.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:14.383Z,1520567714.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:14.782Z,1520567714.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:15.182Z,1520567715.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:15.582Z,1520567715.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:15.982Z,1520567715.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:16.387Z,1520567716.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:16.782Z,1520567716.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:17.189Z,1520567717.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:17.587Z,1520567717.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:17.989Z,1520567717.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:18.392Z,1520567718.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:18.797Z,1520567718.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:19.191Z,1520567719.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:19.591Z,1520567719.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:19.988Z,1520567719.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:20.382Z,1520567720.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:20.799Z,1520567720.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:21.180Z,1520567721.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:21.588Z,1520567721.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:21.988Z,1520567721.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:22.385Z,1520567722.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:22.789Z,1520567722.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:23.190Z,1520567723.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:23.589Z,1520567723.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:23.991Z,1520567723.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:24.389Z,1520567724.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:24.790Z,1520567724.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:25.186Z,1520567725.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:25.582Z,1520567725.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:25.979Z,1520567725.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:26.382Z,1520567726.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:26.782Z,1520567726.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:27.180Z,1520567727.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:27.586Z,1520567727.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:27.994Z,1520567727.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:28.390Z,1520567728.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:28.787Z,1520567728.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:29.187Z,1520567729.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:29.587Z,1520567729.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:29.990Z,1520567729.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:30.389Z,1520567730.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:30.790Z,1520567730.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:31.178Z,1520567731.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:31.591Z,1520567731.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:31.979Z,1520567731.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:32.391Z,1520567732.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:32.790Z,1520567732.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:33.188Z,1520567733.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:33.586Z,1520567733.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:33.987Z,1520567733.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:34.387Z,1520567734.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:34.782Z,1520567734.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:35.182Z,1520567735.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:35.583Z,1520567735.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:35.990Z,1520567735.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:36.387Z,1520567736.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:36.789Z,1520567736.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:37.191Z,1520567737.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:37.590Z,1520567737.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:37.987Z,1520567737.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:38.390Z,1520567738.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:38.789Z,1520567738.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:39.190Z,1520567739.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:39.589Z,1520567739.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:40.002Z,1520567740.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:40.388Z,1520567740.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:40.794Z,1520567740.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:41.191Z,1520567741.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:41.591Z,1520567741.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:41.991Z,1520567741.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:42.389Z,1520567742.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:42.789Z,1520567742.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:43.188Z,1520567743.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:43.593Z,1520567743.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:46.866Z,1520567746.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:47.018Z,1520567747.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:47.410Z,1520567747.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:47.814Z,1520567747.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:48.216Z,1520567748.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:48.622Z,1520567748.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:49.015Z,1520567749.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:49.416Z,1520567749.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:49.818Z,1520567749.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:50.220Z,1520567750.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:50.618Z,1520567750.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:51.027Z,1520567751.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:51.411Z,1520567751.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:51.819Z,1520567751.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:52.219Z,1520567752.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:52.618Z,1520567752.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:53.022Z,1520567753.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:53.418Z,1520567753.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:53.814Z,1520567753.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:54.218Z,1520567754.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:54.627Z,1520567754.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:55.016Z,1520567755.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:55.418Z,1520567755.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:55.820Z,1520567755.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:56.212Z,1520567756.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:56.612Z,1520567756.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:57.013Z,1520567757.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:57.412Z,1520567757.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:57.810Z,1520567757.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:58.220Z,1520567758.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:58.611Z,1520567758.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:59.025Z,1520567759.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:59.430Z,1520567759.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:55:59.812Z,1520567759.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:00.210Z,1520567760.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:00.610Z,1520567760.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:01.007Z,1520567761.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:01.410Z,1520567761.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:01.816Z,1520567761.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:02.214Z,1520567762.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:02.622Z,1520567762.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:03.018Z,1520567763.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:03.411Z,1520567763.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:03.818Z,1520567763.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:04.217Z,1520567764.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:04.619Z,1520567764.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:05.016Z,1520567765.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:05.421Z,1520567765.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:05.821Z,1520567765.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:06.210Z,1520567766.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:06.635Z,1520567766.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:07.012Z,1520567767.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:07.412Z,1520567767.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:07.821Z,1520567767.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:08.217Z,1520567768.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:08.619Z,1520567768.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:09.012Z,1520567769.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:09.418Z,1520567769.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:09.816Z,1520567769.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:10.222Z,1520567770.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:10.619Z,1520567770.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:11.018Z,1520567771.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:11.413Z,1520567771.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:11.807Z,1520567771.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:12.210Z,1520567772.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:12.621Z,1520567772.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:13.010Z,1520567773.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:13.412Z,1520567773.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:13.810Z,1520567773.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:14.210Z,1520567774.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:14.621Z,1520567774.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:15.031Z,1520567775.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:15.411Z,1520567775.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:15.822Z,1520567775.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:16.230Z,1520567776.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:16.610Z,1520567776.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:17.022Z,1520567777.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:17.410Z,1520567777.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:17.810Z,1520567777.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:18.214Z,1520567778.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:18.618Z,1520567778.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:19.016Z,1520567779.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:19.418Z,1520567779.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:19.817Z,1520567779.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:20.219Z,1520567780.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:20.618Z,1520567780.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:21.022Z,1520567781.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:21.418Z,1520567781.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:21.811Z,1520567781.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:22.246Z,1520567782.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:22.612Z,1520567782.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:23.012Z,1520567783.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:23.415Z,1520567783.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:23.813Z,1520567783.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:24.216Z,1520567784.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:24.620Z,1520567784.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:25.019Z,1520567785.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:25.412Z,1520567785.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:25.818Z,1520567785.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:26.219Z,1520567786.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:26.619Z,1520567786.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:27.025Z,1520567787.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:27.419Z,1520567787.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:27.833Z,1520567787.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:28.218Z,1520567788.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:28.618Z,1520567788.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:29.018Z,1520567789.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:29.418Z,1520567789.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:29.818Z,1520567789.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:30.211Z,1520567790.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:30.630Z,1520567790.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:31.015Z,1520567791.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:31.414Z,1520567791.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:31.816Z,1520567791.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:32.217Z,1520567792.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:32.618Z,1520567792.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:33.019Z,1520567793.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:33.418Z,1520567793.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:33.814Z,1520567793.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:34.218Z,1520567794.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:34.619Z,1520567794.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:35.011Z,1520567795.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:35.428Z,1520567795.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:35.816Z,1520567795.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:36.218Z,1520567796.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:36.628Z,1520567796.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:37.017Z,1520567797.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:37.404Z,1520567797.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:37.822Z,1520567797.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:38.210Z,1520567798.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:38.610Z,1520567798.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:39.010Z,1520567799.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:39.406Z,1520567799.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:39.807Z,1520567799.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:40.210Z,1520567800.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:40.606Z,1520567800.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:41.010Z,1520567801.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:41.431Z,1520567801.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:41.806Z,1520567801.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:42.231Z,1520567802.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:42.610Z,1520567802.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:43.006Z,1520567803.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:43.404Z,1520567803.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:43.813Z,1520567803.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:46.995Z,1520567806.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:47.104Z,1520567807.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:47.500Z,1520567807.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:47.898Z,1520567807.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:48.298Z,1520567808.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:48.697Z,1520567808.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:49.098Z,1520567809.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:49.494Z,1520567809.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:49.896Z,1520567809.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:50.298Z,1520567810.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:50.701Z,1520567810.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:51.096Z,1520567811.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:51.486Z,1520567811.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:51.889Z,1520567811.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:52.291Z,1520567812.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:52.685Z,1520567812.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:53.087Z,1520567813.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:53.490Z,1520567813.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:53.890Z,1520567813.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:54.294Z,1520567814.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:54.690Z,1520567814.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:55.091Z,1520567815.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:55.487Z,1520567815.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:55.890Z,1520567815.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:56.290Z,1520567816.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:56.694Z,1520567816.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:57.091Z,1520567817.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:57.498Z,1520567817.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:57.884Z,1520567817.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:58.299Z,1520567818.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:58.697Z,1520567818.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:59.095Z,1520567819.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:59.494Z,1520567819.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:56:59.901Z,1520567819.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:00.295Z,1520567820.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:00.698Z,1520567820.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:01.101Z,1520567821.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:01.498Z,1520567821.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:01.909Z,1520567821.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:02.293Z,1520567822.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:02.695Z,1520567822.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:03.108Z,1520567823.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:03.502Z,1520567823.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:03.887Z,1520567823.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:04.302Z,1520567824.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:04.692Z,1520567824.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:05.088Z,1520567825.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:05.491Z,1520567825.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:05.887Z,1520567825.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:06.288Z,1520567826.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:06.696Z,1520567826.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:07.086Z,1520567827.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:07.490Z,1520567827.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:07.889Z,1520567827.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:08.290Z,1520567828.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:08.690Z,1520567828.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:09.090Z,1520567829.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:09.495Z,1520567829.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:09.887Z,1520567829.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:10.299Z,1520567830.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:10.696Z,1520567830.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:11.096Z,1520567831.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:11.498Z,1520567831.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:11.898Z,1520567831.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:12.298Z,1520567832.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:12.693Z,1520567832.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:13.095Z,1520567833.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:13.495Z,1520567833.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:13.898Z,1520567833.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:14.298Z,1520567834.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:14.698Z,1520567834.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:15.107Z,1520567835.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:15.498Z,1520567835.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:15.895Z,1520567835.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:16.306Z,1520567836.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:16.698Z,1520567836.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:17.095Z,1520567837.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:17.498Z,1520567837.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:17.902Z,1520567837.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:18.296Z,1520567838.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:18.698Z,1520567838.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:19.102Z,1520567839.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:19.494Z,1520567839.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:19.898Z,1520567839.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:20.298Z,1520567840.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:20.702Z,1520567840.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:21.097Z,1520567841.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:21.502Z,1520567841.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:21.898Z,1520567841.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:22.307Z,1520567842.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:22.698Z,1520567842.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:23.095Z,1520567843.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:23.490Z,1520567843.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:23.902Z,1520567843.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:24.283Z,1520567844.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:24.686Z,1520567844.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:25.094Z,1520567845.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:25.487Z,1520567845.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:25.879Z,1520567845.879 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-03-09T03:57:25.879Z,1520567845.879 [DropWeight] Hardware Fault, FailCount= 1
2018-03-09T03:57:25.880Z,1520567845.880 [DropWeight](ERROR): Hardware Fault
2018-03-09T03:57:25.920Z,1520567845.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:25.947Z,1520567845.947 [CBIT](INFO): Critical error at 20180309T035725
2018-03-09T03:57:25.973Z,1520567845.973 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-03-09T03:57:25.974Z,1520567845.974 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-03-09T03:57:26.289Z,1520567846.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:26.340Z,1520567846.340 [CBIT](INFO): Critical error at 20180309T035725
2018-03-09T03:57:26.694Z,1520567846.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:27.093Z,1520567847.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:27.494Z,1520567847.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:27.897Z,1520567847.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:28.297Z,1520567848.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:28.699Z,1520567848.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:29.090Z,1520567849.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:29.506Z,1520567849.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:29.898Z,1520567849.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:30.298Z,1520567850.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:30.697Z,1520567850.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:31.097Z,1520567851.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:31.496Z,1520567851.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:31.896Z,1520567851.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:32.296Z,1520567852.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:32.697Z,1520567852.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:33.096Z,1520567853.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:33.496Z,1520567853.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:33.895Z,1520567853.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:34.297Z,1520567854.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:34.702Z,1520567854.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:35.097Z,1520567855.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:35.497Z,1520567855.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:35.898Z,1520567855.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:36.297Z,1520567856.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:36.697Z,1520567856.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:37.098Z,1520567857.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:37.502Z,1520567857.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:37.906Z,1520567857.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:38.302Z,1520567858.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:38.697Z,1520567858.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:39.097Z,1520567859.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:39.493Z,1520567859.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:39.897Z,1520567859.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:40.298Z,1520567860.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:40.702Z,1520567860.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:41.086Z,1520567861.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:41.499Z,1520567861.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:41.888Z,1520567861.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:42.310Z,1520567862.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:42.690Z,1520567862.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:43.088Z,1520567863.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:43.133Z,1520567863.133 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-09T03:57:43.133Z,1520567863.133 [Default:CheckIn:C.Wait] Stopped
2018-03-09T03:57:43.133Z,1520567863.133 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-09T03:57:43.133Z,1520567863.133 [Default:CheckIn:D] Running Loop=1
2018-03-09T03:57:43.490Z,1520567863.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:43.528Z,1520567863.528 [Default:CheckIn:D] Stopped
2018-03-09T03:57:43.528Z,1520567863.528 [Default:CheckIn:E] Running Loop=1
2018-03-09T03:57:43.890Z,1520567863.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:43.930Z,1520567863.930 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1211.978776 min 
2018-03-09T03:57:43.930Z,1520567863.930 [Default:CheckIn:E] Stopped
2018-03-09T03:57:43.930Z,1520567863.930 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-09T03:57:43.930Z,1520567863.930 [Default:CheckIn] Stopped
2018-03-09T03:57:43.931Z,1520567863.931 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-09T03:57:43.931Z,1520567863.931 [Default:CheckIn](INFO): Running loop #122
2018-03-09T03:57:43.931Z,1520567863.931 [Default:CheckIn] Running Loop=122
2018-03-09T03:57:43.931Z,1520567863.931 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-09T03:57:43.931Z,1520567863.931 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-09T03:57:44.286Z,1520567864.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:44.669Z,1520567864.669 [NAL9602](INFO): Powering up
2018-03-09T03:57:44.686Z,1520567864.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:45.094Z,1520567865.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:48.279Z,1520567868.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:48.391Z,1520567868.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:48.794Z,1520567868.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:49.191Z,1520567869.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:49.591Z,1520567869.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:49.990Z,1520567869.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:50.388Z,1520567870.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:50.782Z,1520567870.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:51.182Z,1520567871.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:51.586Z,1520567871.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:51.982Z,1520567871.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:52.030Z,1520567872.030 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T03:57:52.030Z,1520567872.030 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 64
2018-03-09T03:57:52.030Z,1520567872.030 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T03:57:52.047Z,1520567872.047 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T03:57:52.390Z,1520567872.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:52.445Z,1520567872.445 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T03:57:52.446Z,1520567872.446 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 64
2018-03-09T03:57:52.787Z,1520567872.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:52.821Z,1520567872.821 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T03:57:52.822Z,1520567872.822 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T03:57:52.822Z,1520567872.822 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T03:57:53.190Z,1520567873.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:53.587Z,1520567873.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:53.986Z,1520567873.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:54.389Z,1520567874.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:54.788Z,1520567874.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:55.193Z,1520567875.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:55.566Z,1520567875.566 [NAL9602](INFO): NAL9602 initialized
2018-03-09T03:57:55.593Z,1520567875.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:55.983Z,1520567875.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:56.405Z,1520567876.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:56.801Z,1520567876.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:57.196Z,1520567877.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:57.593Z,1520567877.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:57.984Z,1520567877.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:58.401Z,1520567878.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:58.778Z,1520567878.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:59.255Z,1520567879.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:59.598Z,1520567879.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:57:59.987Z,1520567879.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:00.386Z,1520567880.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:00.799Z,1520567880.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:01.232Z,1520567881.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:01.587Z,1520567881.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:01.987Z,1520567881.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:02.390Z,1520567882.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:02.793Z,1520567882.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:03.182Z,1520567883.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:03.582Z,1520567883.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:03.983Z,1520567883.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:04.382Z,1520567884.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:04.782Z,1520567884.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:05.194Z,1520567885.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:05.590Z,1520567885.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:05.990Z,1520567885.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:06.391Z,1520567886.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:06.789Z,1520567886.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:07.190Z,1520567887.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:07.586Z,1520567887.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:07.993Z,1520567887.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:08.390Z,1520567888.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:08.791Z,1520567888.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:09.181Z,1520567889.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:09.582Z,1520567889.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:09.987Z,1520567889.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:10.393Z,1520567890.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:10.790Z,1520567890.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:11.188Z,1520567891.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:11.592Z,1520567891.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:11.990Z,1520567891.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:12.390Z,1520567892.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:12.790Z,1520567892.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:13.189Z,1520567893.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:13.594Z,1520567893.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:13.985Z,1520567893.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:14.394Z,1520567894.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:14.794Z,1520567894.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:15.182Z,1520567895.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:15.583Z,1520567895.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:15.990Z,1520567895.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:16.394Z,1520567896.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:16.782Z,1520567896.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:17.190Z,1520567897.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:17.595Z,1520567897.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:17.989Z,1520567897.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:18.390Z,1520567898.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:18.788Z,1520567898.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:19.190Z,1520567899.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:19.593Z,1520567899.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:19.985Z,1520567899.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:20.392Z,1520567900.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:20.782Z,1520567900.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:21.186Z,1520567901.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:21.586Z,1520567901.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:21.982Z,1520567901.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:22.383Z,1520567902.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:22.782Z,1520567902.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:23.192Z,1520567903.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:23.591Z,1520567903.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:23.990Z,1520567903.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:24.386Z,1520567904.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:24.818Z,1520567904.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:25.183Z,1520567905.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:25.590Z,1520567905.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:25.989Z,1520567905.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:26.390Z,1520567906.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:26.789Z,1520567906.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:27.188Z,1520567907.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:27.570Z,1520567907.570 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-09T03:58:27.644Z,1520567907.644 [NAL9602](FAULT): received: 
+CSQ:0

OK12, 2, 0, 0, 0

OK
2018-03-09T03:58:27.645Z,1520567907.645 [NAL9602] Data Fault, FailCount= 4
2018-03-09T03:58:27.645Z,1520567907.645 [NAL9602](ERROR): Data Fault
2018-03-09T03:58:27.662Z,1520567907.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:27.752Z,1520567907.752 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-09T03:58:27.963Z,1520567907.963 [NAL9602](INFO): Powering down
2018-03-09T03:58:28.017Z,1520567908.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:28.386Z,1520567908.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:28.782Z,1520567908.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:28.824Z,1520567908.824 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-09T03:58:28.824Z,1520567908.824 [NAL9602] No Fault, FailCount= 4
2018-03-09T03:58:29.179Z,1520567909.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:29.582Z,1520567909.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:29.994Z,1520567909.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:30.379Z,1520567910.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:30.787Z,1520567910.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:31.183Z,1520567911.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:31.585Z,1520567911.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:31.994Z,1520567911.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:32.385Z,1520567912.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:32.785Z,1520567912.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:33.188Z,1520567913.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:33.590Z,1520567913.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:33.978Z,1520567913.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:34.383Z,1520567914.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:34.786Z,1520567914.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:35.175Z,1520567915.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:35.582Z,1520567915.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:35.982Z,1520567915.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:36.379Z,1520567916.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:36.786Z,1520567916.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:37.186Z,1520567917.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:37.593Z,1520567917.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:37.984Z,1520567917.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:38.378Z,1520567918.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:38.787Z,1520567918.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:39.194Z,1520567919.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:39.587Z,1520567919.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:39.981Z,1520567919.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:40.394Z,1520567920.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:40.785Z,1520567920.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:41.183Z,1520567921.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:41.591Z,1520567921.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:41.985Z,1520567921.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:42.387Z,1520567922.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:42.785Z,1520567922.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:43.193Z,1520567923.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:43.588Z,1520567923.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:43.994Z,1520567923.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:47.249Z,1520567927.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:47.377Z,1520567927.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:47.747Z,1520567927.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:48.149Z,1520567928.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:48.546Z,1520567928.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:48.948Z,1520567928.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:49.350Z,1520567929.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:49.751Z,1520567929.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:50.150Z,1520567930.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:50.550Z,1520567930.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:50.945Z,1520567930.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:51.360Z,1520567931.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:51.749Z,1520567931.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:52.149Z,1520567932.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:52.561Z,1520567932.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:52.954Z,1520567932.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:53.338Z,1520567933.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:53.745Z,1520567933.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:54.137Z,1520567934.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:54.539Z,1520567934.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:54.949Z,1520567934.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:55.349Z,1520567935.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:55.754Z,1520567935.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:56.145Z,1520567936.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:56.553Z,1520567936.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:56.938Z,1520567936.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:57.342Z,1520567937.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:57.762Z,1520567937.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:58.123Z,1520567938.123 [NAL9602](INFO): Powering up NAL9602
2018-03-09T03:58:58.140Z,1520567938.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:58.542Z,1520567938.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:58.937Z,1520567938.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:59.342Z,1520567939.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:58:59.743Z,1520567939.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:00.141Z,1520567940.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:00.539Z,1520567940.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:00.954Z,1520567940.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:01.337Z,1520567941.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:01.753Z,1520567941.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:02.142Z,1520567942.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:02.542Z,1520567942.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:02.939Z,1520567942.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:03.342Z,1520567943.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:03.761Z,1520567943.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:04.135Z,1520567944.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:04.543Z,1520567944.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:04.938Z,1520567944.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:05.335Z,1520567945.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:05.742Z,1520567945.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:06.141Z,1520567946.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:06.535Z,1520567946.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:06.942Z,1520567946.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:07.349Z,1520567947.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:07.746Z,1520567947.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:08.146Z,1520567948.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:08.565Z,1520567948.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:08.931Z,1520567948.931 [NAL9602](INFO): NAL9602 initialized
2018-03-09T03:59:08.947Z,1520567948.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:09.351Z,1520567949.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:09.730Z,1520567949.730 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-09T03:59:09.730Z,1520567949.730 [NAL9602] Data Fault, FailCount= 5
2018-03-09T03:59:09.730Z,1520567949.730 [NAL9602](ERROR): Data Fault
2018-03-09T03:59:09.747Z,1520567949.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:09.814Z,1520567949.814 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-09T03:59:09.814Z,1520567949.814 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-09T03:59:10.137Z,1520567950.137 [NAL9602](INFO): Powering down
2018-03-09T03:59:10.155Z,1520567950.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:10.212Z,1520567950.212 [CBIT](INFO): Critical error at 20180309T035909
2018-03-09T03:59:10.547Z,1520567950.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:10.948Z,1520567950.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:11.345Z,1520567951.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:11.755Z,1520567951.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:12.150Z,1520567952.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:12.549Z,1520567952.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:12.949Z,1520567952.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:13.348Z,1520567953.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:13.753Z,1520567953.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:14.150Z,1520567954.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:14.548Z,1520567954.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:14.946Z,1520567954.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:15.344Z,1520567955.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:15.752Z,1520567955.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:16.139Z,1520567956.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:16.553Z,1520567956.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:16.942Z,1520567956.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:17.337Z,1520567957.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:17.742Z,1520567957.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:18.137Z,1520567958.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:18.537Z,1520567958.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:18.942Z,1520567958.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:19.341Z,1520567959.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:19.737Z,1520567959.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:20.142Z,1520567960.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:20.541Z,1520567960.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:20.939Z,1520567960.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:21.337Z,1520567961.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:21.746Z,1520567961.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:22.140Z,1520567962.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:22.542Z,1520567962.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:22.947Z,1520567962.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:23.343Z,1520567963.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:23.755Z,1520567963.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:24.144Z,1520567964.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:24.545Z,1520567964.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:24.948Z,1520567964.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:25.349Z,1520567965.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:25.754Z,1520567965.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:26.152Z,1520567966.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:26.550Z,1520567966.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:26.939Z,1520567966.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:27.342Z,1520567967.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:27.742Z,1520567967.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:28.139Z,1520567968.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:28.555Z,1520567968.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:28.941Z,1520567968.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:29.339Z,1520567969.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:29.741Z,1520567969.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:30.145Z,1520567970.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:30.539Z,1520567970.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:30.942Z,1520567970.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:31.345Z,1520567971.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:31.761Z,1520567971.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:32.161Z,1520567972.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:32.545Z,1520567972.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:32.937Z,1520567972.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:33.361Z,1520567973.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:33.745Z,1520567973.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:34.139Z,1520567974.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:34.541Z,1520567974.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:34.945Z,1520567974.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:35.343Z,1520567975.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:35.746Z,1520567975.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:36.149Z,1520567976.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:36.545Z,1520567976.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:36.946Z,1520567976.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:37.347Z,1520567977.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:37.744Z,1520567977.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:38.148Z,1520567978.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:38.545Z,1520567978.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:38.948Z,1520567978.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:39.348Z,1520567979.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:39.748Z,1520567979.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:40.147Z,1520567980.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:40.548Z,1520567980.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:40.949Z,1520567980.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:41.349Z,1520567981.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:41.749Z,1520567981.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:42.150Z,1520567982.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:42.539Z,1520567982.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:42.950Z,1520567982.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:43.343Z,1520567983.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:43.744Z,1520567983.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:44.145Z,1520567984.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:47.807Z,1520567987.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:47.914Z,1520567987.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:48.326Z,1520567988.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:48.735Z,1520567988.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:49.108Z,1520567989.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:49.512Z,1520567989.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:49.911Z,1520567989.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:50.309Z,1520567990.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:50.710Z,1520567990.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:51.120Z,1520567991.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:51.515Z,1520567991.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:51.921Z,1520567991.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:52.317Z,1520567992.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:52.732Z,1520567992.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:53.132Z,1520567993.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:53.517Z,1520567993.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:53.905Z,1520567993.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:54.329Z,1520567994.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:54.720Z,1520567994.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:55.107Z,1520567995.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:55.518Z,1520567995.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:55.916Z,1520567995.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:56.305Z,1520567996.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:56.710Z,1520567996.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:57.109Z,1520567997.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:57.506Z,1520567997.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:57.922Z,1520567997.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:58.317Z,1520567998.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:58.718Z,1520567998.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:59.116Z,1520567999.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:59.517Z,1520567999.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T03:59:59.913Z,1520567999.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:00.319Z,1520568000.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:00.716Z,1520568000.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:01.114Z,1520568001.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:01.514Z,1520568001.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:01.913Z,1520568001.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:02.303Z,1520568002.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:02.721Z,1520568002.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:03.105Z,1520568003.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:03.507Z,1520568003.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:03.909Z,1520568003.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:04.305Z,1520568004.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:04.706Z,1520568004.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:05.110Z,1520568005.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:05.509Z,1520568005.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:05.907Z,1520568005.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:06.329Z,1520568006.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:06.709Z,1520568006.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:07.107Z,1520568007.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:07.529Z,1520568007.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:07.909Z,1520568007.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:08.313Z,1520568008.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:08.710Z,1520568008.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:09.105Z,1520568009.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:09.505Z,1520568009.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:09.909Z,1520568009.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:10.305Z,1520568010.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:10.709Z,1520568010.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:11.113Z,1520568011.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:11.517Z,1520568011.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:11.907Z,1520568011.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:12.325Z,1520568012.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:12.719Z,1520568012.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:13.117Z,1520568013.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:13.526Z,1520568013.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:13.913Z,1520568013.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:14.318Z,1520568014.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:14.717Z,1520568014.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:15.117Z,1520568015.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:15.518Z,1520568015.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:15.912Z,1520568015.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:16.318Z,1520568016.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:16.716Z,1520568016.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:17.128Z,1520568017.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:17.514Z,1520568017.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:17.907Z,1520568017.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:18.310Z,1520568018.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:18.706Z,1520568018.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:19.110Z,1520568019.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:19.510Z,1520568019.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:19.910Z,1520568019.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:20.309Z,1520568020.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:20.730Z,1520568020.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:21.109Z,1520568021.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:21.510Z,1520568021.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:21.913Z,1520568021.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:22.309Z,1520568022.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:22.713Z,1520568022.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:23.109Z,1520568023.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:23.505Z,1520568023.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:23.903Z,1520568023.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:24.305Z,1520568024.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:24.713Z,1520568024.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:25.103Z,1520568025.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:25.509Z,1520568025.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:25.915Z,1520568025.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:26.317Z,1520568026.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:26.716Z,1520568026.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:27.116Z,1520568027.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:27.514Z,1520568027.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:27.916Z,1520568027.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:28.317Z,1520568028.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:28.717Z,1520568028.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:29.109Z,1520568029.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:29.505Z,1520568029.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:29.909Z,1520568029.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:30.309Z,1520568030.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:30.713Z,1520568030.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:31.107Z,1520568031.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:31.521Z,1520568031.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:31.909Z,1520568031.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:32.309Z,1520568032.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:32.714Z,1520568032.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:33.118Z,1520568033.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:33.513Z,1520568033.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:33.918Z,1520568033.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:34.319Z,1520568034.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:34.719Z,1520568034.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:35.127Z,1520568035.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:35.520Z,1520568035.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:35.914Z,1520568035.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:36.326Z,1520568036.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:36.721Z,1520568036.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:37.103Z,1520568037.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:37.516Z,1520568037.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:37.921Z,1520568037.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:38.320Z,1520568038.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:38.716Z,1520568038.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:39.113Z,1520568039.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:39.507Z,1520568039.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:39.928Z,1520568039.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:40.321Z,1520568040.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:40.717Z,1520568040.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:41.118Z,1520568041.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:41.521Z,1520568041.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:41.905Z,1520568041.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:42.328Z,1520568042.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:42.721Z,1520568042.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:43.105Z,1520568043.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:43.517Z,1520568043.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:43.921Z,1520568043.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:44.305Z,1520568044.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:47.561Z,1520568047.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:47.709Z,1520568047.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:48.041Z,1520568048.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:48.441Z,1520568048.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:48.845Z,1520568048.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:49.233Z,1520568049.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:49.631Z,1520568049.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:50.033Z,1520568050.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:50.437Z,1520568050.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:50.831Z,1520568050.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:51.238Z,1520568051.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:51.641Z,1520568051.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:52.031Z,1520568052.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:52.442Z,1520568052.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:52.845Z,1520568052.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:52.863Z,1520568052.863 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T04:00:52.863Z,1520568052.863 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 65
2018-03-09T04:00:52.863Z,1520568052.863 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T04:00:52.921Z,1520568052.921 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T04:00:53.239Z,1520568053.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:53.278Z,1520568053.278 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T04:00:53.278Z,1520568053.278 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 65
2018-03-09T04:00:53.637Z,1520568053.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:53.663Z,1520568053.663 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T04:00:53.664Z,1520568053.664 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T04:00:53.664Z,1520568053.664 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T04:00:54.034Z,1520568054.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:54.444Z,1520568054.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:54.834Z,1520568054.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:55.241Z,1520568055.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:55.640Z,1520568055.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:56.036Z,1520568056.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:56.437Z,1520568056.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:56.831Z,1520568056.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:57.234Z,1520568057.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:57.633Z,1520568057.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:58.029Z,1520568058.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:58.434Z,1520568058.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:58.838Z,1520568058.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:59.233Z,1520568059.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:00:59.638Z,1520568059.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:00.039Z,1520568060.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:00.440Z,1520568060.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:00.837Z,1520568060.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:01.245Z,1520568061.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:01.645Z,1520568061.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:02.045Z,1520568062.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:02.453Z,1520568062.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:02.844Z,1520568062.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:03.233Z,1520568063.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:03.637Z,1520568063.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:04.037Z,1520568064.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:04.439Z,1520568064.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:04.840Z,1520568064.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:05.241Z,1520568065.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:05.640Z,1520568065.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:06.158Z,1520568066.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:06.427Z,1520568066.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:06.837Z,1520568066.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:07.234Z,1520568067.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:07.637Z,1520568067.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:08.034Z,1520568068.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:08.434Z,1520568068.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:08.835Z,1520568068.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:09.234Z,1520568069.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:09.638Z,1520568069.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:09.743Z,1520568069.743 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-09T04:01:09.744Z,1520568069.744 [NAL9602] No Fault, FailCount= 5
2018-03-09T04:01:10.015Z,1520568070.015 [NAL9602](INFO): Powering up NAL9602
2018-03-09T04:01:10.033Z,1520568070.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:10.434Z,1520568070.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:10.842Z,1520568070.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:11.237Z,1520568071.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:11.641Z,1520568071.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:12.042Z,1520568072.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:12.430Z,1520568072.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:12.837Z,1520568072.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:13.230Z,1520568073.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:13.638Z,1520568073.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:14.034Z,1520568074.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:14.433Z,1520568074.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:14.838Z,1520568074.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:15.238Z,1520568075.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:15.634Z,1520568075.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:16.039Z,1520568076.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:16.442Z,1520568076.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:16.846Z,1520568076.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:17.231Z,1520568077.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:17.641Z,1520568077.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:18.033Z,1520568078.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:18.430Z,1520568078.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:18.833Z,1520568078.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:19.241Z,1520568079.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:19.642Z,1520568079.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:20.040Z,1520568080.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:20.447Z,1520568080.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:20.814Z,1520568080.814 [NAL9602](INFO): NAL9602 initialized
2018-03-09T04:01:20.839Z,1520568080.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:21.246Z,1520568081.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:21.648Z,1520568081.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:22.051Z,1520568082.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:22.456Z,1520568082.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:22.838Z,1520568082.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:23.239Z,1520568083.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:23.658Z,1520568083.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:24.045Z,1520568084.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:24.445Z,1520568084.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:24.834Z,1520568084.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:25.234Z,1520568085.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:25.639Z,1520568085.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:26.038Z,1520568086.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:26.434Z,1520568086.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:26.828Z,1520568086.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:27.238Z,1520568087.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:27.635Z,1520568087.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:28.032Z,1520568088.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:28.465Z,1520568088.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:28.862Z,1520568088.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:29.241Z,1520568089.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:29.649Z,1520568089.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:30.042Z,1520568090.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:30.432Z,1520568090.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:30.842Z,1520568090.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:31.244Z,1520568091.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:31.645Z,1520568091.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:32.046Z,1520568092.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:32.439Z,1520568092.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:32.832Z,1520568092.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:33.254Z,1520568093.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:33.654Z,1520568093.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:34.045Z,1520568094.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:34.454Z,1520568094.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:34.853Z,1520568094.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:35.236Z,1520568095.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:35.637Z,1520568095.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:36.034Z,1520568096.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:36.430Z,1520568096.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:36.838Z,1520568096.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:37.239Z,1520568097.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:37.634Z,1520568097.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:38.034Z,1520568098.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:38.434Z,1520568098.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:38.841Z,1520568098.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:39.258Z,1520568099.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:39.644Z,1520568099.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:40.057Z,1520568100.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:40.434Z,1520568100.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:40.834Z,1520568100.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:41.234Z,1520568101.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:41.641Z,1520568101.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:42.046Z,1520568102.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:42.454Z,1520568102.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:42.845Z,1520568102.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:43.256Z,1520568103.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:43.636Z,1520568103.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:44.060Z,1520568104.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:44.452Z,1520568104.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:50.867Z,1520568110.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:51.023Z,1520568111.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:51.415Z,1520568111.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:51.812Z,1520568111.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:52.213Z,1520568112.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:52.600Z,1520568112.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:53.018Z,1520568113.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:53.406Z,1520568113.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:53.798Z,1520568113.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:54.201Z,1520568114.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:54.598Z,1520568114.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:55.001Z,1520568115.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:55.411Z,1520568115.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:55.809Z,1520568115.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:56.209Z,1520568116.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:56.621Z,1520568116.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:57.009Z,1520568117.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:57.399Z,1520568117.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:57.799Z,1520568117.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:58.212Z,1520568118.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:58.598Z,1520568118.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:58.996Z,1520568118.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:59.398Z,1520568119.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:01:59.798Z,1520568119.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:00.196Z,1520568120.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:00.603Z,1520568120.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:01.013Z,1520568121.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:01.413Z,1520568121.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:01.817Z,1520568121.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:02.209Z,1520568122.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:02.604Z,1520568122.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:03.006Z,1520568123.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:03.406Z,1520568123.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:03.802Z,1520568123.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:04.197Z,1520568124.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:04.598Z,1520568124.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:04.997Z,1520568124.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:05.398Z,1520568125.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:05.794Z,1520568125.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:06.204Z,1520568126.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:06.621Z,1520568126.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:07.019Z,1520568127.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:07.413Z,1520568127.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:07.798Z,1520568127.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:08.202Z,1520568128.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:08.602Z,1520568128.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:09.019Z,1520568129.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:09.398Z,1520568129.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:09.798Z,1520568129.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:10.218Z,1520568130.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:10.598Z,1520568130.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:10.998Z,1520568130.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:11.429Z,1520568131.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:11.818Z,1520568131.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:12.208Z,1520568132.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:12.620Z,1520568132.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:12.998Z,1520568132.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:13.396Z,1520568133.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:13.443Z,1520568133.443 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-09T04:02:13.801Z,1520568133.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:14.206Z,1520568134.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:14.606Z,1520568134.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:15.006Z,1520568135.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:15.407Z,1520568135.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:15.803Z,1520568135.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:16.208Z,1520568136.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:16.613Z,1520568136.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:17.012Z,1520568137.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:17.412Z,1520568137.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:17.815Z,1520568137.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:18.194Z,1520568138.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:18.602Z,1520568138.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:19.007Z,1520568139.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:19.396Z,1520568139.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:19.801Z,1520568139.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:20.194Z,1520568140.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:20.610Z,1520568140.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:21.008Z,1520568141.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:21.411Z,1520568141.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:21.821Z,1520568141.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:22.229Z,1520568142.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:22.609Z,1520568142.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:23.016Z,1520568143.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:23.408Z,1520568143.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:23.807Z,1520568143.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:24.196Z,1520568144.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:24.609Z,1520568144.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:25.007Z,1520568145.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:25.405Z,1520568145.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:25.817Z,1520568145.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:26.205Z,1520568146.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:26.610Z,1520568146.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:27.016Z,1520568147.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:27.413Z,1520568147.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:27.811Z,1520568147.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:28.222Z,1520568148.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:28.598Z,1520568148.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:28.996Z,1520568148.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:29.398Z,1520568149.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:29.798Z,1520568149.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:30.196Z,1520568150.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:30.597Z,1520568150.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:30.998Z,1520568150.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:31.396Z,1520568151.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:31.798Z,1520568151.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:32.209Z,1520568152.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:32.613Z,1520568152.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:33.017Z,1520568153.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:33.417Z,1520568153.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:33.807Z,1520568153.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:34.204Z,1520568154.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:34.607Z,1520568154.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:34.996Z,1520568154.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:35.414Z,1520568155.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:35.807Z,1520568155.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:36.203Z,1520568156.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:36.614Z,1520568156.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:37.007Z,1520568157.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:37.412Z,1520568157.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:37.816Z,1520568157.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:38.220Z,1520568158.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:38.614Z,1520568158.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:39.005Z,1520568159.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:39.407Z,1520568159.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:39.795Z,1520568159.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:40.218Z,1520568160.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:40.598Z,1520568160.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:40.996Z,1520568160.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:41.401Z,1520568161.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:41.794Z,1520568161.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:42.192Z,1520568162.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:42.620Z,1520568162.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:43.005Z,1520568163.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:43.418Z,1520568163.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:43.817Z,1520568163.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:44.198Z,1520568164.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:44.241Z,1520568164.241 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-09T03:57:43.9Z
2018-03-09T04:02:44.241Z,1520568164.241 [Default:CheckIn:Read_GPS] Stopped
2018-03-09T04:02:44.241Z,1520568164.241 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-09T04:02:44.606Z,1520568164.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:47.953Z,1520568167.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:48.095Z,1520568168.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:48.409Z,1520568168.409 [DataOverHttps](INFO): Sending 123 bytes from file Logs/20180308T074127/Courier0488.lzma
2018-03-09T04:02:48.444Z,1520568168.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:48.840Z,1520568168.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:49.204Z,1520568169.204 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Courier0488.lzma.bak
2018-03-09T04:02:49.204Z,1520568169.204 [DataOverHttps](INFO): SBD MOMSN=7992067
2018-03-09T04:02:49.246Z,1520568169.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:49.838Z,1520568169.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:50.038Z,1520568170.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:53.342Z,1520568173.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:53.465Z,1520568173.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:53.829Z,1520568173.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:54.221Z,1520568174.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:54.611Z,1520568174.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:55.012Z,1520568175.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:55.406Z,1520568175.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:58.653Z,1520568178.653 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-09T04:02:58.680Z,1520568178.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:58.793Z,1520568178.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:59.137Z,1520568179.137 [DataOverHttps](INFO): Sending 252 bytes from file Logs/20180308T074127/Express0489.lzma
2018-03-09T04:02:59.161Z,1520568179.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:59.549Z,1520568179.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:02:59.928Z,1520568179.928 [DataOverHttps](INFO): Moved sent file to Logs/20180308T074127/Express0489.lzma.bak
2018-03-09T04:02:59.928Z,1520568179.928 [DataOverHttps](INFO): SBD MOMSN=7992072
2018-03-09T04:02:59.962Z,1520568179.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:00.572Z,1520568180.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:00.611Z,1520568180.611 [Default:CheckIn:Read_Iridium] Stopped
2018-03-09T04:03:00.611Z,1520568180.611 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-09T04:03:00.611Z,1520568180.611 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-09T04:03:00.752Z,1520568180.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:01.154Z,1520568181.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:04.344Z,1520568184.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:04.454Z,1520568184.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:04.815Z,1520568184.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:05.213Z,1520568185.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:05.610Z,1520568185.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:06.026Z,1520568186.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:06.406Z,1520568186.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:06.809Z,1520568186.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:07.215Z,1520568187.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:07.612Z,1520568187.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:08.010Z,1520568188.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:08.425Z,1520568188.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:08.802Z,1520568188.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:09.199Z,1520568189.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:09.606Z,1520568189.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:10.002Z,1520568190.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:10.410Z,1520568190.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:10.814Z,1520568190.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:11.213Z,1520568191.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:11.612Z,1520568191.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:12.023Z,1520568192.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:12.417Z,1520568192.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:12.812Z,1520568192.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:13.209Z,1520568193.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:13.602Z,1520568193.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:14.002Z,1520568194.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:14.406Z,1520568194.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:14.810Z,1520568194.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:15.199Z,1520568195.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:15.618Z,1520568195.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:16.025Z,1520568196.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:16.402Z,1520568196.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:16.806Z,1520568196.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:17.207Z,1520568197.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:17.610Z,1520568197.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:18.005Z,1520568198.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:18.406Z,1520568198.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:18.802Z,1520568198.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:19.206Z,1520568199.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:19.614Z,1520568199.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:20.009Z,1520568200.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:20.412Z,1520568200.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:20.809Z,1520568200.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:21.202Z,1520568201.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:21.606Z,1520568201.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:22.006Z,1520568202.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:22.402Z,1520568202.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:22.826Z,1520568202.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:23.211Z,1520568203.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:23.614Z,1520568203.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:24.015Z,1520568204.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:24.410Z,1520568204.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:24.812Z,1520568204.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:25.210Z,1520568205.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:25.609Z,1520568205.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:26.012Z,1520568206.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:26.425Z,1520568206.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:26.802Z,1520568206.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:27.206Z,1520568207.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:27.626Z,1520568207.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:28.002Z,1520568208.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:28.407Z,1520568208.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:28.805Z,1520568208.805 [NAL9602](INFO): Powering down
2018-03-09T04:03:28.824Z,1520568208.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:29.210Z,1520568209.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:29.602Z,1520568209.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:30.018Z,1520568210.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:30.405Z,1520568210.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:30.808Z,1520568210.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:31.222Z,1520568211.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:31.606Z,1520568211.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:31.000Z,1520568212.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:32.406Z,1520568212.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:32.807Z,1520568212.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:33.199Z,1520568213.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:33.605Z,1520568213.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:34.013Z,1520568214.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:34.417Z,1520568214.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:34.829Z,1520568214.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:35.206Z,1520568215.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:35.607Z,1520568215.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:36.022Z,1520568216.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:36.405Z,1520568216.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:36.806Z,1520568216.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:37.206Z,1520568217.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:37.606Z,1520568217.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:38.006Z,1520568218.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:38.409Z,1520568218.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:38.832Z,1520568218.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:39.199Z,1520568219.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:39.609Z,1520568219.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:40.009Z,1520568220.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:40.407Z,1520568220.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:40.806Z,1520568220.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:41.216Z,1520568221.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:41.648Z,1520568221.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:42.023Z,1520568222.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:42.427Z,1520568222.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:42.811Z,1520568222.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:43.225Z,1520568223.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:43.615Z,1520568223.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:44.013Z,1520568224.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:44.418Z,1520568224.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:44.817Z,1520568224.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:45.206Z,1520568225.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:45.616Z,1520568225.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:46.021Z,1520568226.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:46.410Z,1520568226.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:46.815Z,1520568226.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:47.217Z,1520568227.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:47.617Z,1520568227.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:48.014Z,1520568228.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:48.414Z,1520568228.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:48.806Z,1520568228.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:49.210Z,1520568229.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:49.618Z,1520568229.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:50.003Z,1520568230.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:50.409Z,1520568230.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:50.818Z,1520568230.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:51.202Z,1520568231.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:51.606Z,1520568231.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:52.006Z,1520568232.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:52.399Z,1520568232.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:52.806Z,1520568232.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:53.207Z,1520568233.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:53.606Z,1520568233.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:54.014Z,1520568234.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:54.032Z,1520568234.032 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-09T04:03:54.032Z,1520568234.032 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 66
2018-03-09T04:03:54.032Z,1520568234.032 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-09T04:03:54.087Z,1520568234.087 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-09T04:03:54.415Z,1520568234.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:54.481Z,1520568234.481 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-09T04:03:54.481Z,1520568234.481 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 66
2018-03-09T04:03:54.810Z,1520568234.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:54.828Z,1520568234.828 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-09T04:03:54.828Z,1520568234.828 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-09T04:03:54.829Z,1520568234.829 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-09T04:03:55.213Z,1520568235.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:55.626Z,1520568235.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:56.003Z,1520568236.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:56.418Z,1520568236.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:56.805Z,1520568236.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:57.207Z,1520568237.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:57.619Z,1520568237.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:58.006Z,1520568238.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:58.402Z,1520568238.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:58.810Z,1520568238.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:59.345Z,1520568239.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:03:59.611Z,1520568239.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:00.006Z,1520568240.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:00.406Z,1520568240.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:00.814Z,1520568240.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:01.218Z,1520568241.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:04.544Z,1520568244.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:04.658Z,1520568244.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:05.022Z,1520568245.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:05.415Z,1520568245.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:05.813Z,1520568245.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:06.215Z,1520568246.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:06.615Z,1520568246.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:07.011Z,1520568247.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:07.412Z,1520568247.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:07.816Z,1520568247.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:08.209Z,1520568248.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:08.613Z,1520568248.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:09.019Z,1520568249.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:09.411Z,1520568249.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:09.813Z,1520568249.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:10.224Z,1520568250.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:10.617Z,1520568250.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:11.023Z,1520568251.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:11.413Z,1520568251.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:11.809Z,1520568251.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:12.213Z,1520568252.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:12.618Z,1520568252.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:13.004Z,1520568253.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:13.417Z,1520568253.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:13.806Z,1520568253.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:14.206Z,1520568254.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:14.605Z,1520568254.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:15.019Z,1520568255.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:15.402Z,1520568255.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:15.826Z,1520568255.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:16.226Z,1520568256.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:16.606Z,1520568256.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:17.037Z,1520568257.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:17.407Z,1520568257.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:17.844Z,1520568257.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:18.206Z,1520568258.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:18.610Z,1520568258.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:19.006Z,1520568259.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:19.409Z,1520568259.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:19.801Z,1520568259.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:20.206Z,1520568260.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:20.612Z,1520568260.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:21.014Z,1520568261.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:21.406Z,1520568261.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:21.814Z,1520568261.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:22.215Z,1520568262.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:22.614Z,1520568262.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:23.014Z,1520568263.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:23.414Z,1520568263.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:23.813Z,1520568263.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:24.220Z,1520568264.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:24.609Z,1520568264.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:25.010Z,1520568265.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:25.413Z,1520568265.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:25.810Z,1520568265.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:26.214Z,1520568266.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:26.625Z,1520568266.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:27.013Z,1520568267.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:27.414Z,1520568267.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:27.813Z,1520568267.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:28.213Z,1520568268.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:28.609Z,1520568268.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:29.013Z,1520568269.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:29.412Z,1520568269.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:29.809Z,1520568269.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:30.226Z,1520568270.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:30.613Z,1520568270.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:31.021Z,1520568271.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:31.421Z,1520568271.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:31.809Z,1520568271.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:32.206Z,1520568272.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:32.605Z,1520568272.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:32.999Z,1520568272.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:33.406Z,1520568273.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:33.806Z,1520568273.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:34.210Z,1520568274.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:34.611Z,1520568274.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:35.011Z,1520568275.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:35.410Z,1520568275.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:35.813Z,1520568275.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:36.215Z,1520568276.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:36.611Z,1520568276.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:37.013Z,1520568277.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:37.413Z,1520568277.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:37.808Z,1520568277.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:38.213Z,1520568278.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:38.622Z,1520568278.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:39.010Z,1520568279.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:39.413Z,1520568279.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:39.814Z,1520568279.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:40.200Z,1520568280.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:40.618Z,1520568280.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:41.021Z,1520568281.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:41.417Z,1520568281.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:41.818Z,1520568281.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:42.220Z,1520568282.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:42.618Z,1520568282.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:43.013Z,1520568283.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:43.413Z,1520568283.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:43.813Z,1520568283.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:44.223Z,1520568284.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:44.615Z,1520568284.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:45.010Z,1520568285.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:45.423Z,1520568285.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:45.813Z,1520568285.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:46.203Z,1520568286.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:46.618Z,1520568286.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:47.013Z,1520568287.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:47.413Z,1520568287.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:47.809Z,1520568287.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:48.217Z,1520568288.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:48.602Z,1520568288.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:49.009Z,1520568289.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:49.409Z,1520568289.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:49.814Z,1520568289.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:50.218Z,1520568290.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:50.625Z,1520568290.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:51.013Z,1520568291.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:51.418Z,1520568291.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:51.825Z,1520568291.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:52.214Z,1520568292.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:52.618Z,1520568292.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:53.013Z,1520568293.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:53.402Z,1520568293.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:53.818Z,1520568293.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:54.223Z,1520568294.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:54.613Z,1520568294.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:55.009Z,1520568295.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:55.409Z,1520568295.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:55.817Z,1520568295.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:56.206Z,1520568296.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:56.606Z,1520568296.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:57.006Z,1520568297.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:57.426Z,1520568297.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:57.820Z,1520568297.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:58.205Z,1520568298.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:58.606Z,1520568298.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:59.027Z,1520568299.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:59.418Z,1520568299.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:04:59.827Z,1520568299.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:00.218Z,1520568300.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:00.606Z,1520568300.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:01.001Z,1520568301.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:01.407Z,1520568301.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:04.676Z,1520568304.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:04.788Z,1520568304.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:05.154Z,1520568305.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:05.542Z,1520568305.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:05.954Z,1520568305.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:06.349Z,1520568306.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:06.748Z,1520568306.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:07.151Z,1520568307.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:07.550Z,1520568307.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:07.945Z,1520568307.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:08.348Z,1520568308.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:08.754Z,1520568308.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:09.145Z,1520568309.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:09.548Z,1520568309.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:09.946Z,1520568309.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:10.350Z,1520568310.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:10.754Z,1520568310.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:11.160Z,1520568311.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:11.549Z,1520568311.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:11.954Z,1520568311.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:12.349Z,1520568312.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:12.749Z,1520568312.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:13.140Z,1520568313.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:13.543Z,1520568313.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:13.938Z,1520568313.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:14.346Z,1520568314.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:14.743Z,1520568314.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:15.137Z,1520568315.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:15.535Z,1520568315.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:15.942Z,1520568315.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:16.345Z,1520568316.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:16.739Z,1520568316.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:17.142Z,1520568317.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:17.549Z,1520568317.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:17.949Z,1520568317.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:18.347Z,1520568318.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:18.751Z,1520568318.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:19.147Z,1520568319.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:19.558Z,1520568319.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:19.951Z,1520568319.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:20.349Z,1520568320.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:20.748Z,1520568320.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:21.149Z,1520568321.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:21.547Z,1520568321.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:21.948Z,1520568321.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:22.345Z,1520568322.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:22.754Z,1520568322.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:23.145Z,1520568323.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:23.554Z,1520568323.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:23.950Z,1520568323.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:24.358Z,1520568324.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:24.751Z,1520568324.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:25.151Z,1520568325.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:25.562Z,1520568325.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:25.951Z,1520568325.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:26.351Z,1520568326.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:26.762Z,1520568326.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:27.150Z,1520568327.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:27.540Z,1520568327.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:27.942Z,1520568327.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:28.341Z,1520568328.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:28.738Z,1520568328.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:29.142Z,1520568329.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:29.538Z,1520568329.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:29.938Z,1520568329.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:30.342Z,1520568330.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:30.742Z,1520568330.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:31.135Z,1520568331.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:31.563Z,1520568331.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:31.942Z,1520568331.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:32.346Z,1520568332.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:32.744Z,1520568332.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:33.141Z,1520568333.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:33.539Z,1520568333.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:33.942Z,1520568333.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:34.349Z,1520568334.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:34.749Z,1520568334.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:35.150Z,1520568335.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:35.546Z,1520568335.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:35.946Z,1520568335.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:36.349Z,1520568336.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:36.749Z,1520568336.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:37.147Z,1520568337.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:37.559Z,1520568337.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:37.953Z,1520568337.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:38.349Z,1520568338.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:38.759Z,1520568338.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:39.154Z,1520568339.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:39.538Z,1520568339.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:39.949Z,1520568339.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:40.349Z,1520568340.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:40.753Z,1520568340.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:41.147Z,1520568341.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:41.538Z,1520568341.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:41.950Z,1520568341.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:42.344Z,1520568342.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:42.743Z,1520568342.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:43.146Z,1520568343.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:43.551Z,1520568343.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:43.950Z,1520568343.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:44.349Z,1520568344.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:44.752Z,1520568344.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:45.149Z,1520568345.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:45.542Z,1520568345.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:45.945Z,1520568345.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:46.341Z,1520568346.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:46.750Z,1520568346.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:47.151Z,1520568347.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:47.546Z,1520568347.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:47.948Z,1520568347.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:48.345Z,1520568348.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:48.751Z,1520568348.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:49.149Z,1520568349.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:49.550Z,1520568349.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:49.949Z,1520568349.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:50.347Z,1520568350.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:50.752Z,1520568350.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:51.146Z,1520568351.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:51.550Z,1520568351.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:51.950Z,1520568351.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:52.349Z,1520568352.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:52.754Z,1520568352.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:53.149Z,1520568353.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:53.549Z,1520568353.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:53.949Z,1520568353.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:54.349Z,1520568354.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:54.749Z,1520568354.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:55.147Z,1520568355.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:55.553Z,1520568355.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:55.952Z,1520568355.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:56.353Z,1520568356.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:56.752Z,1520568356.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:57.152Z,1520568357.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:57.547Z,1520568357.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:57.949Z,1520568357.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:58.350Z,1520568358.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:58.753Z,1520568358.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:59.159Z,1520568359.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:59.549Z,1520568359.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:05:59.947Z,1520568359.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:00.350Z,1520568360.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:00.750Z,1520568360.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:01.148Z,1520568361.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:01.550Z,1520568361.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:04.679Z,1520568364.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:04.806Z,1520568364.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:05.170Z,1520568365.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:05.562Z,1520568365.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:05.934Z,1520568365.934 [DataOverHttps](IMPORTANT): SBD MTMSN=20180309T040526
2018-03-09T04:06:05.971Z,1520568365.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:06.371Z,1520568366.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:06.766Z,1520568366.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:09.955Z,1520568369.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:10.089Z,1520568370.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:10.417Z,1520568370.417 [DataOverHttps](INFO): Received command:restart sys
2018-03-09T04:06:10.446Z,1520568370.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:10.502Z,1520568370.502 [CommandLine](IMPORTANT): got command restart system
2018-03-09T04:06:10.821Z,1520568370.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:11.230Z,1520568371.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:11.621Z,1520568371.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:12.019Z,1520568372.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:12.412Z,1520568372.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:12.819Z,1520568372.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:13.222Z,1520568373.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:13.619Z,1520568373.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:14.018Z,1520568374.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:14.419Z,1520568374.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:14.818Z,1520568374.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:15.219Z,1520568375.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:15.643Z,1520568375.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:16.018Z,1520568376.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:16.419Z,1520568376.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:16.814Z,1520568376.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:17.219Z,1520568377.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:17.631Z,1520568377.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:18.027Z,1520568378.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:18.421Z,1520568378.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:18.701Z,1520568378.701 [CommandLine ThreadHandler](INFO): Uninitializing protected caller thread.
2018-03-09T04:06:18.701Z,1520568378.701 [CommandLine ThreadHandler](INFO): Thread cancelled.
2018-03-09T04:06:18.732Z,1520568378.732 [Supervisor](DEBUG): Uninitializing supervisor and starting cleanup.  Bye!
2018-03-09T04:06:18.733Z,1520568378.733 [CommandLine ThreadHandler](INFO): Thread cancelled.
2018-03-09T04:06:18.733Z,1520568378.733 [CommandLine](INFO): Join timeout helper Thread ID is 8406
2018-03-09T04:06:18.734Z,1520568378.734 [ComponentRegistry](INFO): Shutting down NavChartDb ThreadHandler
2018-03-09T04:06:18.734Z,1520568378.734 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2018-03-09T04:06:18.734Z,1520568378.734 [NavChartDb](INFO): Join timeout helper Thread ID is 8407
2018-03-09T04:06:18.824Z,1520568378.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:18.869Z,1520568378.869 [NavChartDb ThreadHandler](INFO): Uninitializing protected caller thread.
2018-03-09T04:06:18.869Z,1520568378.869 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2018-03-09T04:06:18.881Z,1520568378.881 [ComponentRegistry](INFO): Shutting down Radio_Surface ThreadHandler
2018-03-09T04:06:18.881Z,1520568378.881 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2018-03-09T04:06:18.882Z,1520568378.882 [Radio_Surface](INFO): Join timeout helper Thread ID is 8408
2018-03-09T04:06:19.081Z,1520568379.081 [Radio_Surface ThreadHandler](INFO): Uninitializing protected caller thread.
2018-03-09T04:06:19.081Z,1520568379.081 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2018-03-09T04:06:19.096Z,1520568379.096 [ComponentRegistry](INFO): Shutting down WetLabsBB2FL ThreadHandler
2018-03-09T04:06:19.097Z,1520568379.097 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2018-03-09T04:06:19.097Z,1520568379.097 [WetLabsBB2FL](INFO): Join timeout helper Thread ID is 8409
2018-03-09T04:06:19.221Z,1520568379.221 [WetLabsBB2FL ThreadHandler](INFO): Uninitializing protected caller thread.
2018-03-09T04:06:19.221Z,1520568379.221 [WetLabsBB2FL](INFO): Powering down
2018-03-09T04:06:19.222Z,1520568379.222 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2018-03-09T04:06:19.225Z,1520568379.225 [ComponentRegistry](INFO): Shutting down CTD_Seabird ThreadHandler
2018-03-09T04:06:19.225Z,1520568379.225 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2018-03-09T04:06:19.225Z,1520568379.225 [CTD_Seabird](INFO): Join timeout helper Thread ID is 8410
2018-03-09T04:06:19.226Z,1520568379.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-03-09T04:06:19.325Z,1520568379.325 [CTD_Seabird ThreadHandler](INFO): Uninitializing protected caller thread.
2018-03-09T04:06:19.422Z,1520568379.422 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-03-09T04:06:19.422Z,1520568379.422 [CTD_Seabird](INFO): Powering down
2018-03-09T04:06:19.423Z,1520568379.423 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2018-03-09T04:06:19.442Z,1520568379.442 [ComponentRegistry](INFO): Shutting down logger ThreadHandler
2018-03-09T04:06:19.442Z,1520568379.442 [logger ThreadHandler](INFO): Thread cancelled.
2018-03-09T04:06:19.442Z,1520568379.442 [logger](INFO): Join timeout helper Thread ID is 8412
2018-03-09T04:06:19.473Z,1520568379.473 [logger ThreadHandler](INFO): Uninitializing protected caller thread.
2018-03-09T04:06:19.473Z,1520568379.473 [logger ThreadHandler](INFO): Thread cancelled.
2018-03-09T04:06:19.481Z,1520568379.481 [ComponentRegistry](INFO): Shutting down CommandLine ThreadHandler
2018-03-09T04:06:19.481Z,1520568379.481 [CommandLine ThreadHandler](INFO): Thread cancelled.
2018-03-09T04:06:19.482Z,1520568379.482 [ComponentRegistry](INFO): Shutting down controlThread ThreadHandler
2018-03-09T04:06:19.482Z,1520568379.482 [controlThread ThreadHandler](INFO): Thread cancelled.
2018-03-09T04:06:19.482Z,1520568379.482 [controlThread](INFO): Join timeout helper Thread ID is 8413
2018-03-09T04:06:19.589Z,1520568379.589 [controlThread ThreadHandler](INFO): Uninitializing protected caller thread.
2018-03-09T04:06:19.589Z,1520568379.589 [controlThread](DEBUG): Uninitializing ControlThread
2018-03-09T04:06:19.590Z,1520568379.590 [Aanderaa_O2](INFO): Powering down
2018-03-09T04:06:19.592Z,1520568379.592 [NAL9602](INFO): Powering down
2018-03-09T04:06:19.594Z,1520568379.594 [DAT](INFO): Powering down
2018-03-09T04:06:19.713Z,1520568379.713 [PNI_TCM](INFO): Powering down
2018-03-09T04:06:19.801Z,1520568379.801 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2018-03-09T04:06:19.803Z,1520568379.803 [NavChart](DEBUG): Uninitialize NavChart Navigation.
2018-03-09T04:06:19.804Z,1520568379.804 [MissionManager](INFO): Uninitializing Mission Default
2018-03-09T04:06:19.804Z,1520568379.804 [Default] Stopped
2018-03-09T04:06:19.804Z,1520568379.804 [Default](DEBUG): Aggregate::uninitialize Default
2018-03-09T04:06:19.804Z,1520568379.804 [Default:B.GoToSurface] Stopped
2018-03-09T04:06:19.804Z,1520568379.804 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-03-09T04:06:19.804Z,1520568379.804 [Default:CheckIn] Stopped
2018-03-09T04:06:19.804Z,1520568379.804 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-09T04:06:19.805Z,1520568379.805 [Default:CheckIn:C.Wait] Stopped
2018-03-09T04:06:19.805Z,1520568379.805 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-09T04:06:19.808Z,1520568379.808 [VerticalControl](DEBUG): Uninitialize VerticalControlComponent.
2018-03-09T04:06:19.809Z,1520568379.809 [HorizontalControl](DEBUG): Uninitialize HorizontalControlComponent.
2018-03-09T04:06:19.809Z,1520568379.809 [SpeedControl](DEBUG): Uninitialize SpeedControlComponent.
2018-03-09T04:06:19.809Z,1520568379.809 [LoopControl](DEBUG): Uninitialize LoopControlComponent.
2018-03-09T04:06:19.809Z,1520568379.809 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2018-03-09T04:06:19.809Z,1520568379.809 [BuoyancyServo](INFO): Powering down
2018-03-09T04:06:19.821Z,1520568379.821 [ElevatorServo](DEBUG): Uninitialize Elevator Servo.
2018-03-09T04:06:19.821Z,1520568379.821 [ElevatorServo](INFO): Powering down
2018-03-09T04:06:19.822Z,1520568379.822 [MassServo](DEBUG): Uninitialize Mass Servo.
2018-03-09T04:06:19.822Z,1520568379.822 [MassServo](INFO): Powering down
2018-03-09T04:06:19.823Z,1520568379.823 [RudderServo](DEBUG): Uninitialize Rudder Servo.
2018-03-09T04:06:19.823Z,1520568379.823 [RudderServo](INFO): Powering down
2018-03-09T04:06:19.824Z,1520568379.824 [ThrusterServo](DEBUG): Uninitialize Thruster Servo.
2018-03-09T04:06:19.824Z,1520568379.824 [ThrusterServo](INFO): Powering down
2018-03-09T04:06:19.825Z,1520568379.825 [SBIT](DEBUG): Uninitialize SBIT Component.
2018-03-09T04:06:19.825Z,1520568379.825 [IBIT](DEBUG): Uninitialize IBIT Component.
2018-03-09T04:06:19.825Z,1520568379.825 [CBIT](DEBUG): Uninitialize CBIT Component.
2018-03-09T04:06:19.826Z,1520568379.826 [controlThread ThreadHandler](INFO): Thread cancelled.
2018-03-09T04:06:19.916Z,1520568379.916 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2018-03-09T04:06:19.921Z,1520568379.921 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2018-03-09T04:06:19.987Z,1520568379.987 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2018-03-09T04:06:20.027Z,1520568380.027 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2018-03-09T04:06:20.087Z,1520568380.087 [logger ThreadHandler](INFO): Thread cancelled.